The Role of Structural Models in the Solar Sail Flight Validation Process

NASA Technical Reports Server (NTRS)

Johnston, John D.

2004-01-01

NASA is currently soliciting proposals via the New Millennium Program ST-9 opportunity for a potential Solar Sail Flight Validation (SSFV) experiment to develop and operate in space a deployable solar sail that can be steered and provides measurable acceleration. The approach planned for this experiment is to test and validate models and processes for solar sail design, fabrication, deployment, and flight. These models and processes would then be used to design, fabricate, and operate scaleable solar sails for future space science missions. There are six validation objectives planned for the ST9 SSFV experiment: 1) Validate solar sail design tools and fabrication methods; 2) Validate controlled deployment; 3) Validate in space structural characteristics (focus of poster); 4) Validate solar sail attitude control; 5) Validate solar sail thrust performance; 6) Characterize the sail's electromagnetic interaction with the space environment. This poster presents a top-level assessment of the role of structural models in the validation process for in-space structural characteristics.

Moving to Capture Children's Attention: Developing a Methodology for Measuring Visuomotor Attention.

PubMed

Hill, Liam J B; Coats, Rachel O; Mushtaq, Faisal; Williams, Justin H G; Aucott, Lorna S; Mon-Williams, Mark

2016-01-01

Attention underpins many activities integral to a child's development. However, methodological limitations currently make large-scale assessment of children's attentional skill impractical, costly and lacking in ecological validity. Consequently we developed a measure of 'Visual Motor Attention' (VMA)-a construct defined as the ability to sustain and adapt visuomotor behaviour in response to task-relevant visual information. In a series of experiments, we evaluated the capability of our method to measure attentional processes and their contributions in guiding visuomotor behaviour. Experiment 1 established the method's core features (ability to track stimuli moving on a tablet-computer screen with a hand-held stylus) and demonstrated its sensitivity to principled manipulations in adults' attentional load. Experiment 2 standardised a format suitable for use with children and showed construct validity by capturing developmental changes in executive attention processes. Experiment 3 tested the hypothesis that children with and without coordination difficulties would show qualitatively different response patterns, finding an interaction between the cognitive and motor factors underpinning responses. Experiment 4 identified associations between VMA performance and existing standardised attention assessments and thereby confirmed convergent validity. These results establish a novel approach to measuring childhood attention that can produce meaningful functional assessments that capture how attention operates in an ecologically valid context (i.e. attention's specific contribution to visuomanual action).

Validation of an Instrument to Measure Community College Student Satisfaction

ERIC Educational Resources Information Center

Zhai, Lijuan

2012-01-01

This article reports the development and validation of a survey instrument to measure community college students' satisfaction with their educational experiences. The initial survey included 95 questions addressing community college student experiences. Data were collected from 558 community college students during spring of 2001. An exploratory…

Development, Testing, and Validation of a Model-Based Tool to Predict Operator Responses in Unexpected Workload Transitions

NASA Technical Reports Server (NTRS)

Sebok, Angelia; Wickens, Christopher; Sargent, Robert

2015-01-01

One human factors challenge is predicting operator performance in novel situations. Approaches such as drawing on relevant previous experience, and developing computational models to predict operator performance in complex situations, offer potential methods to address this challenge. A few concerns with modeling operator performance are that models need to realistic, and they need to be tested empirically and validated. In addition, many existing human performance modeling tools are complex and require that an analyst gain significant experience to be able to develop models for meaningful data collection. This paper describes an effort to address these challenges by developing an easy to use model-based tool, using models that were developed from a review of existing human performance literature and targeted experimental studies, and performing an empirical validation of key model predictions.

The Inventory of High-School Students' Recent Life Experiences: A Decontaminated Measure of Adolescents' Hassles.

ERIC Educational Resources Information Center

Kohn, Paul M.; Milrose, Jill A.

1993-01-01

A decontaminated measure of exposures to hassles for adolescents, the Inventory of High-School Students' Recent Life Experiences (IHSSRLE), was developed and validated with 94 male and 82 female Canadian high school students. The IHSSRLE shows adequate internal consistency reliability and validity against the criterion of subjectively appraised…

Moving to Capture Children’s Attention: Developing a Methodology for Measuring Visuomotor Attention

PubMed Central

Coats, Rachel O.; Mushtaq, Faisal; Williams, Justin H. G.; Aucott, Lorna S.; Mon-Williams, Mark

2016-01-01

Attention underpins many activities integral to a child’s development. However, methodological limitations currently make large-scale assessment of children’s attentional skill impractical, costly and lacking in ecological validity. Consequently we developed a measure of ‘Visual Motor Attention’ (VMA)—a construct defined as the ability to sustain and adapt visuomotor behaviour in response to task-relevant visual information. In a series of experiments, we evaluated the capability of our method to measure attentional processes and their contributions in guiding visuomotor behaviour. Experiment 1 established the method’s core features (ability to track stimuli moving on a tablet-computer screen with a hand-held stylus) and demonstrated its sensitivity to principled manipulations in adults’ attentional load. Experiment 2 standardised a format suitable for use with children and showed construct validity by capturing developmental changes in executive attention processes. Experiment 3 tested the hypothesis that children with and without coordination difficulties would show qualitatively different response patterns, finding an interaction between the cognitive and motor factors underpinning responses. Experiment 4 identified associations between VMA performance and existing standardised attention assessments and thereby confirmed convergent validity. These results establish a novel approach to measuring childhood attention that can produce meaningful functional assessments that capture how attention operates in an ecologically valid context (i.e. attention's specific contribution to visuomanual action). PMID:27434198

Development and validation of the crew-station system-integration research facility

NASA Technical Reports Server (NTRS)

Nedell, B.; Hardy, G.; Lichtenstein, T.; Leong, G.; Thompson, D.

1986-01-01

The various issues associated with the use of integrated flight management systems in aircraft were discussed. To address these issues a fixed base integrated flight research (IFR) simulation of a helicopter was developed to support experiments that contribute to the understanding of design criteria for rotorcraft cockpits incorporating advanced integrated flight management systems. A validation experiment was conducted that demonstrates the main features of the facility and the capability to conduct crew/system integration research.

An Engineering Method of Civil Jet Requirements Validation Based on Requirements Project Principle

NASA Astrophysics Data System (ADS)

Wang, Yue; Gao, Dan; Mao, Xuming

2018-03-01

A method of requirements validation is developed and defined to meet the needs of civil jet requirements validation in product development. Based on requirements project principle, this method will not affect the conventional design elements, and can effectively connect the requirements with design. It realizes the modern civil jet development concept, which is “requirement is the origin, design is the basis”. So far, the method has been successfully applied in civil jet aircraft development in China. Taking takeoff field length as an example, the validation process and the validation method of the requirements are detailed introduced in the study, with the hope of providing the experiences to other civil jet product design.

Temperature and heat flux datasets of a complex object in a fire plume for the validation of fire and thermal response codes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jernigan, Dann A.; Blanchat, Thomas K.

It is necessary to improve understanding and develop temporally- and spatially-resolved integral scale validation data of the heat flux incident to a complex object in addition to measuring the thermal response of said object located within the fire plume for the validation of the SIERRA/FUEGO/SYRINX fire and SIERRA/CALORE codes. To meet this objective, a complex calorimeter with sufficient instrumentation to allow validation of the coupling between FUEGO/SYRINX/CALORE has been designed, fabricated, and tested in the Fire Laboratory for Accreditation of Models and Experiments (FLAME) facility. Validation experiments are specifically designed for direct comparison with the computational predictions. Making meaningful comparisonmore » between the computational and experimental results requires careful characterization and control of the experimental features or parameters used as inputs into the computational model. Validation experiments must be designed to capture the essential physical phenomena, including all relevant initial and boundary conditions. This report presents the data validation steps and processes, the results of the penlight radiant heat experiments (for the purpose of validating the CALORE heat transfer modeling of the complex calorimeter), and the results of the fire tests in FLAME.« less

Validation of the revised Mystical Experience Questionnaire in experimental sessions with psilocybin.

PubMed

Barrett, Frederick S; Johnson, Matthew W; Griffiths, Roland R

2015-11-01

The 30-item revised Mystical Experience Questionnaire (MEQ30) was previously developed within an online survey of mystical-type experiences occasioned by psilocybin-containing mushrooms. The rated experiences occurred on average eight years before completion of the questionnaire. The current paper validates the MEQ30 using data from experimental studies with controlled doses of psilocybin. Data were pooled and analyzed from five laboratory experiments in which participants (n=184) received a moderate to high oral dose of psilocybin (at least 20 mg/70 kg). Results of confirmatory factor analysis demonstrate the reliability and internal validity of the MEQ30. Structural equation models demonstrate the external and convergent validity of the MEQ30 by showing that latent variable scores on the MEQ30 positively predict persisting change in attitudes, behavior, and well-being attributed to experiences with psilocybin while controlling for the contribution of the participant-rated intensity of drug effects. These findings support the use of the MEQ30 as an efficient measure of individual mystical experiences. A method to score a "complete mystical experience" that was used in previous versions of the mystical experience questionnaire is validated in the MEQ30, and a stand-alone version of the MEQ30 is provided for use in future research. © The Author(s) 2015.

Prognostics of Power Electronics, Methods and Validation Experiments

NASA Technical Reports Server (NTRS)

Kulkarni, Chetan S.; Celaya, Jose R.; Biswas, Gautam; Goebel, Kai

2012-01-01

Abstract Failure of electronic devices is a concern for future electric aircrafts that will see an increase of electronics to drive and control safety-critical equipment throughout the aircraft. As a result, investigation of precursors to failure in electronics and prediction of remaining life of electronic components is of key importance. DC-DC power converters are power electronics systems employed typically as sourcing elements for avionics equipment. Current research efforts in prognostics for these power systems focuses on the identification of failure mechanisms and the development of accelerated aging methodologies and systems to accelerate the aging process of test devices, while continuously measuring key electrical and thermal parameters. Preliminary model-based prognostics algorithms have been developed making use of empirical degradation models and physics-inspired degradation model with focus on key components like electrolytic capacitors and power MOSFETs (metal-oxide-semiconductor-field-effect-transistor). This paper presents current results on the development of validation methods for prognostics algorithms of power electrolytic capacitors. Particularly, in the use of accelerated aging systems for algorithm validation. Validation of prognostics algorithms present difficulties in practice due to the lack of run-to-failure experiments in deployed systems. By using accelerated experiments, we circumvent this problem in order to define initial validation activities.

Development and validation of a Chinese music quality rating test.

PubMed

Cai, Yuexin; Zhao, Fei; Zheng, Yiqing

2013-09-01

The present study aims to develop and validate a Chinese music quality rating test (MQRT). In Experiment 1, 22 music pieces were initially selected and paired as a 'familiar music piece' and 'unfamiliar music piece' based on familiarities amongst the general public in the categories of classical music (6), Chinese folk music (8), and pop music (8). Following the selection criteria, one pair of music pieces from each music category was selected and used for the MQRT in Experiment 2. In Experiment 2, the MQRT was validated using these music pieces in the categories 'Pleasantness', 'Naturalness', 'Fullness', 'Roughness', and 'Sharpness'. Seventy-two adult participants and 30 normal-hearing listeners were recruited in Experiments 1 and 2, respectively. Significant differences between the familiar and unfamiliar music pieces were found in respect of pleasantness rating for folk and pop music pieces as well as in sharpness rating for pop music pieces. The comparison of music category effect on MQRT found significant differences in pleasantness, fullness, and sharpness ratings. The Chinese MQRT developed in the present study is an effective tool for assessing music quality.

An Examination and Validation of an Adapted Youth Experience Scale for University Sport

ERIC Educational Resources Information Center

Rathwell, Scott; Young, Bradley W.

2016-01-01

Limited tools assess positive development through university sport. Such a tool was validated in this investigation using two independent samples of Canadian university athletes. In Study 1, 605 athletes completed 99 survey items drawn from the Youth Experience Scale (YES 2.0), and separate a priori measurement models were evaluated (i.e., 99…

Development and Validation of the Caring Loneliness Scale.

PubMed

Karhe, Liisa; Kaunonen, Marja; Koivisto, Anna-Maija

2016-12-01

The Caring Loneliness Scale (CARLOS) includes 5 categories derived from earlier qualitative research. This article assesses the reliability and construct validity of a scale designed to measure patient experiences of loneliness in a professional caring relationship. Statistical analysis with 4 different sample sizes included Cronbach's alpha and exploratory factor analysis with principal axis factoring extraction. The sample size of 250 gave the most useful and comprehensible structure, but all 4 samples yielded underlying content of loneliness experiences. The initial 5 categories were reduced to 4 factors with 24 items and Cronbach's alpha ranging from .77 to .90. The findings support the reliability and validity of CARLOS for the assessment of Finnish breast cancer and heart surgery patients' experiences but as all instruments, further validation is needed.

Validation of the revised Mystical Experience Questionnaire in experimental sessions with psilocybin

PubMed Central

Barrett, Frederick S; Johnson, Matthew W; Griffiths, Roland R

2016-01-01

The 30-item revised Mystical Experience Questionnaire (MEQ30) was previously developed within an online survey of mystical-type experiences occasioned by psilocybin-containing mushrooms. The rated experiences occurred on average eight years before completion of the questionnaire. The current paper validates the MEQ30 using data from experimental studies with controlled doses of psilocybin. Data were pooled and analyzed from five laboratory experiments in which participants (n=184) received a moderate to high oral dose of psilocybin (at least 20 mg/70 kg). Results of confirmatory factor analysis demonstrate the reliability and internal validity of the MEQ30. Structural equation models demonstrate the external and convergent validity of the MEQ30 by showing that latent variable scores on the MEQ30 positively predict persisting change in attitudes, behavior, and well-being attributed to experiences with psilocybin while controlling for the contribution of the participant-rated intensity of drug effects. These findings support the use of the MEQ30 as an efficient measure of individual mystical experiences. A method to score a “complete mystical experience” that was used in previous versions of the mystical experience questionnaire is validated in the MEQ30, and a stand-alone version of the MEQ30 is provided for use in future research. PMID:26442957

Validation of design procedure and performance modeling of a heat and fluid transport field experiment in the unsaturated zone

NASA Astrophysics Data System (ADS)

Nir, A.; Doughty, C.; Tsang, C. F.

Validation methods which developed in the context of deterministic concepts of past generations often cannot be directly applied to environmental problems, which may be characterized by limited reproducibility of results and highly complex models. Instead, validation is interpreted here as a series of activities, including both theoretical and experimental tests, designed to enhance our confidence in the capability of a proposed model to describe some aspect of reality. We examine the validation process applied to a project concerned with heat and fluid transport in porous media, in which mathematical modeling, simulation, and results of field experiments are evaluated in order to determine the feasibility of a system for seasonal thermal energy storage in shallow unsaturated soils. Technical details of the field experiments are not included, but appear in previous publications. Validation activities are divided into three stages. The first stage, carried out prior to the field experiments, is concerned with modeling the relevant physical processes, optimization of the heat-exchanger configuration and the shape of the storage volume, and multi-year simulation. Subjects requiring further theoretical and experimental study are identified at this stage. The second stage encompasses the planning and evaluation of the initial field experiment. Simulations are made to determine the experimental time scale and optimal sensor locations. Soil thermal parameters and temperature boundary conditions are estimated using an inverse method. Then results of the experiment are compared with model predictions using different parameter values and modeling approximations. In the third stage, results of an experiment performed under different boundary conditions are compared to predictions made by the models developed in the second stage. Various aspects of this theoretical and experimental field study are described as examples of the verification and validation procedure. There is no attempt to validate a specific model, but several models of increasing complexity are compared with experimental results. The outcome is interpreted as a demonstration of the paradigm proposed by van der Heijde, 26 that different constituencies have different objectives for the validation process and therefore their acceptance criteria differ also.

Development and Score Validation of a Chemistry Laboratory Anxiety Instrument (CLAI) for College Chemistry Students.

ERIC Educational Resources Information Center

Bowen, Craig W.

1999-01-01

Reports the development and score validation of an instrument for measuring anxieties students experience in college chemistry laboratories. Factor analysis of scores from 361 college students shows that the developed Chemistry Laboratory Anxiety Instrument measures five constructs. Results from a second sample of 598 students show that scores on…

Development and Application of a Novel Rasch-Based Methodology for Evaluating Multi-Tiered Assessment Instruments: Validation and Utilization of an Undergraduate Diagnostic Test of the Water Cycle

ERIC Educational Resources Information Center

Romine, William L.; Schaffer, Dane L.; Barrow, Lloyd

2015-01-01

We describe the development and validation of a three-tiered diagnostic test of the water cycle (DTWC) and use it to evaluate the impact of prior learning experiences on undergraduates' misconceptions. While most approaches to instrument validation take a positivist perspective using singular criteria such as reliability and fit with a measurement…

Scale/TSUNAMI Sensitivity Data for ICSBEP Evaluations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rearden, Bradley T; Reed, Davis Allan; Lefebvre, Robert A

2011-01-01

The Tools for Sensitivity and Uncertainty Analysis Methodology Implementation (TSUNAMI) software developed at Oak Ridge National Laboratory (ORNL) as part of the Scale code system provide unique methods for code validation, gap analysis, and experiment design. For TSUNAMI analysis, sensitivity data are generated for each application and each existing or proposed experiment used in the assessment. The validation of diverse sets of applications requires potentially thousands of data files to be maintained and organized by the user, and a growing number of these files are available through the International Handbook of Evaluated Criticality Safety Benchmark Experiments (IHECSBE) distributed through themore » International Criticality Safety Benchmark Evaluation Program (ICSBEP). To facilitate the use of the IHECSBE benchmarks in rigorous TSUNAMI validation and gap analysis techniques, ORNL generated SCALE/TSUNAMI sensitivity data files (SDFs) for several hundred benchmarks for distribution with the IHECSBE. For the 2010 edition of IHECSBE, the sensitivity data were generated using 238-group cross-section data based on ENDF/B-VII.0 for 494 benchmark experiments. Additionally, ORNL has developed a quality assurance procedure to guide the generation of Scale inputs and sensitivity data, as well as a graphical user interface to facilitate the use of sensitivity data in identifying experiments and applying them in validation studies.« less

Semi-structured Interview Measure of Stigma (SIMS) in psychosis: Assessment of psychometric properties.

PubMed

Wood, Lisa; Burke, Eilish; Byrne, Rory; Enache, Gabriela; Morrison, Anthony P

2016-10-01

Stigma is a significant difficulty for people who experience psychosis. To date, there have been no outcome measures developed to examine stigma exclusively in people with psychosis. The aim of this study was develop and validate a semi-structured interview measure of stigma (SIMS) in psychosis. The SIMS is an eleven item measure of stigma developed in consultation with service users who have experienced psychosis. 79 participants with experience of psychosis were recruited for the purposes of this study. They were administered the SIMS alongside a battery of other relevant outcome measures to examine reliability and validity. A one-factor solution was identified for the SIMS which encompassed all ten rateable items. The measure met all reliability and validity criteria and illustrated good internal consistency, inter-rater reliability, test retest reliability, criterion validity, construct validity, sensitivity to change and had no floor or ceiling effects. The SIMS is a reliable and valid measure of stigma in psychosis. It may be more engaging and acceptable than other stigma measures due to its semi-structured interview format. Crown Copyright © 2016. Published by Elsevier B.V. All rights reserved.

Evidences of Validity of a Scale for Mapping Professional as Defining Competences and Performance by Brazilian Tutors

ERIC Educational Resources Information Center

Coelho, Francisco Antonio, Jr.; Ferreira, Rodrigo Rezende; Paschoal, Tatiane; Faiad, Cristiane; Meneses, Paulo Murce

2015-01-01

The purpose of this study was twofold: to assess evidences of construct validity of the Brazilian Scale of Tutors Competences in the field of Open and Distance Learning and to examine if variables such as professional experience, perception of the student´s learning performance and prior experience influence the development of technical and…

The Environmental Reward Observation Scale (EROS): development, validity, and reliability.

PubMed

Armento, Maria E A; Hopko, Derek R

2007-06-01

Researchers acknowledge a strong association between the frequency and duration of environmental reward and affective mood states, particularly in relation to the etiology, assessment, and treatment of depression. Given behavioral theories that outline environmental reward as a strong mediator of affect and the unavailability of an efficient, reliable, and valid self-report measure of environmental reward, we developed the Environmental Reward Observation Scale (EROS) and examined its psychometric properties. In Experiment 1, exploratory factor analysis supported a unidimensional 10-item measure with strong internal consistency and test-retest reliability. When administered to a replication sample, confirmatory factor analysis suggested an excellent fit to the 1-factor model and convergent/discriminant validity data supported the construct validity of the EROS. In Experiment 2, further support for the convergent validity of the EROS was obtained via moderate correlations with the Pleasant Events Schedule (PES; MacPhillamy & Lewinsohn, 1976). In Experiment 3, hierarchical regression supported the ecological validity of the EROS toward predicting daily diary reports of time spent in highly rewarding behaviors and activities. Above and beyond variance accounted for by depressive symptoms (BDI), the EROS was associated with significant incremental variance in accounting for time spent in both low and high reward behaviors. The EROS may represent a brief, reliable and valid measure of environmental reward that may improve the psychological assessment of negative mood states such as clinical depression.

HBOI Underwater Imaging and Communication Research - Phase 1

DTIC Science & Technology

2012-04-19

validation of one-way pulse stretching radiative transfer code The objective was to develop and validate time-resolved radiative transfer models that...and validation of one-way pulse stretching radiative transfer code The models were subjected to a series of validation experiments over 12.5 meter...about the theoretical basis of the model together with validation results can be found in Dalgleish et al., (20 1 0). Forward scattering Mueller

Environmental Stimulation, Parental Nurturance and Cognitive Development in Humans

ERIC Educational Resources Information Center

Farah, Martha J.; Betancourt, Laura; Shera, David M.; Savage, Jessica H.; Giannetta, Joan M.; Brodsky, Nancy L.; Malmud, Elsa K.; Hurt, Hallam

2008-01-01

The effects of environmental stimulation and parental nurturance on brain development have been studied extensively in animals. Much less is known about the relations between childhood experience and cognitive development in humans. Using a longitudinally collected data set with ecologically valid in-home measures of childhood experience and later…

Learning to recognize rat social behavior: Novel dataset and cross-dataset application.

PubMed

Lorbach, Malte; Kyriakou, Elisavet I; Poppe, Ronald; van Dam, Elsbeth A; Noldus, Lucas P J J; Veltkamp, Remco C

2018-04-15

Social behavior is an important aspect of rodent models. Automated measuring tools that make use of video analysis and machine learning are an increasingly attractive alternative to manual annotation. Because machine learning-based methods need to be trained, it is important that they are validated using data from different experiment settings. To develop and validate automated measuring tools, there is a need for annotated rodent interaction datasets. Currently, the availability of such datasets is limited to two mouse datasets. We introduce the first, publicly available rat social interaction dataset, RatSI. We demonstrate the practical value of the novel dataset by using it as the training set for a rat interaction recognition method. We show that behavior variations induced by the experiment setting can lead to reduced performance, which illustrates the importance of cross-dataset validation. Consequently, we add a simple adaptation step to our method and improve the recognition performance. Most existing methods are trained and evaluated in one experimental setting, which limits the predictive power of the evaluation to that particular setting. We demonstrate that cross-dataset experiments provide more insight in the performance of classifiers. With our novel, public dataset we encourage the development and validation of automated recognition methods. We are convinced that cross-dataset validation enhances our understanding of rodent interactions and facilitates the development of more sophisticated recognition methods. Combining them with adaptation techniques may enable us to apply automated recognition methods to a variety of animals and experiment settings. Copyright © 2017 Elsevier B.V. All rights reserved.

A new practice environment measure based on the reality and experiences of nurses working lives.

PubMed

Webster, Joan; Flint, Anndrea; Courtney, Mary

2009-01-01

To explore the underlying organizational issues affecting a nurses' decision to leave and to develop a contemporary practice environment measure based on the experiences of nurses working lives. Turnover had reached an unacceptable level in our organization but underlying reasons for leaving were unknown. In-depth interviews were conducted with 13 nurses who had resigned. Transcripts were analysed using the constant comparative method. Information from the interviews informed the development a new practice environment tool, which has undergone initial testing using the Content Validity Index and Chronbach's alpha. Two domains ('work life' and 'personal life/professional development') and five themes ('feeling safe', 'feeling valued', 'getting things done', 'professional development' and 'being flexible') emerged from the interviews. A content validity score for the new instrument was 0.79 and Chronbach's alpha 0.93. The new practice environment tool has shown useful initial reliability and validity but requires wider testing in other settings. The reality and experiences of nurses working lives can be identified through exit interviews conducted by an independent person. Information from such interviews is useful in identifying an organization's strength and weaknesses and to develop initiatives to support retention.

Do we know what foundation year doctors think about patient safety incident reporting? Development of a Web based tool to assess attitude and knowledge.

PubMed

Robson, Jean; de Wet, Carl; McKay, John; Bowie, Paul

2011-11-01

Making healthcare safer is an international priority. Patient safety modules are now taught in medical schools, and methods to assess related student knowledge and attitudes have been developed. However, little is known about the attitudes and knowledge which foundation doctors are developing to patient safety and incident reporting in the healthcare workplace, since a specific assessment tool appears to be lacking. To develop, content validate and pilot test an online questionnaire survey to elicit foundation doctors' knowledge and experience of patient safety and incident reporting, and assess related attitudes and behaviours. Questionnaire content validity was facilitated through: a steering group; literature review; feedback from foundation year doctors and consultant staff; a modified Delphi group; and completion of a content validity index by experts. In 2010 a cross-sectional online survey of 110 foundation year 1 and 2 doctors was then undertaken in three Scottish NHS board areas, utilising the developed 25 item questionnaire. The questionnaire was validated, and piloted among 69 foundation year doctors who responded to the questionnaire. The pilot has provided valuable insights into trainee attitudes and experience. For example, 32 (48%) believed that most safety incidents were due to things that they could not do anything about; and 31 (43%) admitted to being involved in medication errors which were not formally reported. The pilot study was successful in taking the first steps to developing a validated survey questionnaire for a key staff group, foundation year doctors, in a priority area. However, the findings raise concerns about trainee experience of and attitudes to reporting, and the frequency with which incidents go unreported.

Development and Validation of a Mathematics Anxiety Scale for Students

ERIC Educational Resources Information Center

Ko, Ho Kyoung; Yi, Hyun Sook

2011-01-01

This study developed and validated a Mathematics Anxiety Scale for Students (MASS) that can be used to measure the level of mathematics anxiety that students experience in school settings and help them overcome anxiety and perform better in mathematics achievement. We conducted a series of preliminary analyses and panel reviews to evaluate quality…

Test Item Construction and Validation: Developing a Statewide Assessment for Agricultural Science Education

ERIC Educational Resources Information Center

Rivera, Jennifer E.

2011-01-01

The State of New York Agriculture Science Education secondary program is required to have a certification exam for students to assess their agriculture science education experience as a Regent's requirement towards graduation. This paper focuses on the procedure used to develop and validate two content sub-test questions within a…

Targeting Low Career Confidence Using the Career Planning Confidence Scale

ERIC Educational Resources Information Center

McAuliffe, Garrett; Jurgens, Jill C.; Pickering, Worth; Calliotte, James; Macera, Anthony; Zerwas, Steven

2006-01-01

The authors describe the development and validation of a test of career planning confidence that makes possible the targeting of specific problem issues in employment counseling. The scale, developed using a rational process and the authors' experience with clients, was tested for criterion-related validity against 2 other measures. The scale…

Development and validation of the Consumer Quality index instrument to measure the experience and priority of chronic dialysis patients.

PubMed

van der Veer, Sabine N; Jager, Kitty J; Visserman, Ella; Beekman, Robert J; Boeschoten, Els W; de Keizer, Nicolette F; Heuveling, Lara; Stronks, Karien; Arah, Onyebuchi A

2012-08-01

Patient experience is an established indicator of quality of care. Validated tools that measure both experiences and priorities are lacking for chronic dialysis care, hampering identification of negative experiences that patients actually rate important. We developed two Consumer Quality (CQ) index questionnaires, one for in-centre haemodialysis (CHD) and the other for peritoneal dialysis and home haemodialysis (PHHD) care. The instruments were validated using exploratory factor analyses, reliability analysis of identified scales and assessing the association between reliable scales and global ratings. We investigated opportunities for improvement by combining suboptimal experience with patient priority. Sixteen dialysis centres participated in our study. The pilot CQ index for CHD care consisted of 71 questions. Based on data of 592 respondents, we identified 42 core experience items in 10 scales with Cronbach's α ranging from 0.38 to 0.88; five were reliable (α ≥ 0.70). The instrument identified information on centres' fire procedures as the aspect of care exhibiting the biggest opportunity for improvement. The pilot CQ index PHHD comprised 56 questions. The response of 248 patients yielded 31 core experience items in nine scales with Cronbach's α ranging between 0.53 and 0.85; six were reliable. Information on kidney transplantation during pre-dialysis showed most room for improvement. However, for both types of care, opportunities for improvement were mostly limited. The CQ index reliably and validly captures dialysis patient experience. Overall, most care aspects showed limited room for improvement, mainly because patients participating in our study rated their experience to be optimal. To evaluate items with high priority, but with which relatively few patients have experience, more qualitative instruments should be considered.

Item generation in the development of an inpatient experience questionnaire: a qualitative study

PubMed Central

2013-01-01

Background Patient experience is a key feature of quality improvement in modern health-care delivery. Measuring patient experience is one of several tools used to assess and monitor the quality of health services. This study aims to develop a tool for assessing patient experience with inpatient care in public hospitals in Hong Kong. Methods Based on the General Inpatient Questionnaire (GIQ) framework of the Care Quality Commission as a discussion guide, a qualitative study involving focus group discussions and in-depth individual interviews with patients was employed to develop a tool for measuring inpatient experience in Hong Kong. Results All participants agreed that a patient satisfaction survey is an important platform for collecting patients’ views on improving the quality of health-care services. Findings of the focus group discussions and in-depth individual interviews identified nine key themes as important hospital quality indicators: prompt access, information provision, care and involvement in decision making, physical and emotional needs, coordination of care, respect and privacy, environment and facilities, handling of patient feedback, and overall care from health-care professionals and quality of care. Privacy, complaint mechanisms, patient involvement, and information provision were further highlighted as particularly important areas for item revision by the in-depth individual interviews. Thus, the initial version of the Hong Kong Inpatient Experience Questionnaire (HKIEQ), comprising 58 core items under nine themes, was developed. Conclusions A set of dimensions and core items of the HKIEQ was developed and the instrument will undergo validity and reliability tests through a validation survey. A valid and reliable tool is important in accurately assessing patient experience with care delivery in hospitals to improve the quality of health-care services. PMID:23835186

Explication: Working to Discover and Share New Knowledge from Prior Experience

ERIC Educational Resources Information Center

Franklin, Peter

2007-01-01

Purpose: The purpose of this paper is to develop the sustained argument that explication can contribute to the emergence and development of the philosopher-manager who is appropriately sceptical of generalisations, and confident in their own abilities to develop local, valid and meaningful theories based on their wisdom and personal experience.…

Development and Validation of E-Portfolios: The UAE Pre-Service Teachers' Experiences

ERIC Educational Resources Information Center

Forawi, Sufian A.; Almekhlafi, Abdurrahman G.; Al-Mekhlafy, Mohamed H.

2012-01-01

Research has indicated the importance of evaluating the experiences related to developing e-portfolios (electronic portfolio) to contribute to the overall excellence in teaching and learning. Researchers (instructors) of the present study used an exit e-portfolios, a questionnaire and follow up interviews to describe development and evaluation of…

Development of the Clinical Teaching Effectiveness Questionnaire in the United States.

PubMed

Wormley, Michelle E; Romney, Wendy; Greer, Anna E

2017-01-01

The purpose of this study was to develop a valid measure for assessing clinical teaching effectiveness within the field of physical therapy. The Clinical Teaching Effectiveness Questionnaire (CTEQ) was developed via a 4-stage process, including (1) initial content development, (2) content analysis with 8 clinical instructors with over 5 years of clinical teaching experience, (3) pilot testing with 205 clinical instructors from 2 universities in the Northeast of the United States, and (4) psychometric evaluation, including principal component analysis. The scale development process resulted in a 30-item questionnaire with 4 sections that relate to clinical teaching: learning experiences, learning environment, communication, and evaluation. The CTEQ provides a preliminary valid measure for assessing clinical teaching effectiveness in physical therapy practice.

Reliability and validity of the neurorehabilitation experience questionnaire for inpatients.

PubMed

Kneebone, Ian I; Hull, Samantha L; McGurk, Rhona; Cropley, Mark

2012-09-01

Patient-centered measures of the inpatient neurorehabilitation experience are needed to assess services. The objective of this study was to develop a valid and reliable Neurorehabilitation Experience Questionnaire (NREQ) to assess whether neurorehabilitation inpatients experience service elements important to them. Based on the themes established in prior qualitative research, adopting questions from established inventories and using a literature review, a draft version of the NREQ was generated. Focus groups and interviews were conducted with 9 patients and 26 staff from neurological rehabilitation units to establish face validity. Then, 70 patients were recruited to complete the NREQ to ascertain reliability (internal and test-retest) and concurrent validity. On the basis of the face validity testing, several modifications were made to the draft version of the NREQ. Subsequently, internal reliability (time 1 α = .76, time 2 α = .80), test retest reliability (r = 0.70), and concurrent validity (r = 0.32 and r = 0.56) were established for the revised version. Whereas responses were associated with positive mood (r = 0.30), they appeared not to be influenced by negative mood, age, education, length of stay, sex, functional independence, or whether a participant had been a patient on a unit previously. Preliminary validation of the NREQ suggests promise for use with its target population.

Phase I Development of Neutral Beam Injector Solid-State Power System

NASA Astrophysics Data System (ADS)

Prager, James; Ziemba, Timothy; Miller, Kenneth E.; Slobodov, Ilia; Anderson, Seth

2017-10-01

Neutral beam injection (NBI) is an important tool for plasma heating, current drive and a diagnostic at fusion science experiments around the United States, including tokamaks, validation platform experiments, and privately funded fusion concepts. Currently, there are no vendors in the United States for NBI power systems. Eagle Harbor Technologies (EHT), Inc. is developing a new power system for NBI that takes advantage of the latest developments in solid-state switching. EHT has developed a resonant converter that can be scaled to the power levels required for NBI at small-scale validation platform experiments like the Lithium Tokamak Experiment. This power system can be used to modulate the NBI voltages over the course of a plasma shot, which can lead to improved control over the plasma. EHT will present initial modeling used to design this system as well as experimental data showing operation at 15 kV and 40 A for 10 ms into a test load. With support of DOE SBIR.

A design of experiments approach to validation sampling for logistic regression modeling with error-prone medical records.

PubMed

Ouyang, Liwen; Apley, Daniel W; Mehrotra, Sanjay

2016-04-01

Electronic medical record (EMR) databases offer significant potential for developing clinical hypotheses and identifying disease risk associations by fitting statistical models that capture the relationship between a binary response variable and a set of predictor variables that represent clinical, phenotypical, and demographic data for the patient. However, EMR response data may be error prone for a variety of reasons. Performing a manual chart review to validate data accuracy is time consuming, which limits the number of chart reviews in a large database. The authors' objective is to develop a new design-of-experiments-based systematic chart validation and review (DSCVR) approach that is more powerful than the random validation sampling used in existing approaches. The DSCVR approach judiciously and efficiently selects the cases to validate (i.e., validate whether the response values are correct for those cases) for maximum information content, based only on their predictor variable values. The final predictive model will be fit using only the validation sample, ignoring the remainder of the unvalidated and unreliable error-prone data. A Fisher information based D-optimality criterion is used, and an algorithm for optimizing it is developed. The authors' method is tested in a simulation comparison that is based on a sudden cardiac arrest case study with 23 041 patients' records. This DSCVR approach, using the Fisher information based D-optimality criterion, results in a fitted model with much better predictive performance, as measured by the receiver operating characteristic curve and the accuracy in predicting whether a patient will experience the event, than a model fitted using a random validation sample. The simulation comparisons demonstrate that this DSCVR approach can produce predictive models that are significantly better than those produced from random validation sampling, especially when the event rate is low. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Father for the first time - development and validation of a questionnaire to assess fathers’ experiences of first childbirth (FTFQ)

PubMed Central

2012-01-01

Background A father’s experience of the birth of his first child is important not only for his birth-giving partner but also for the father himself, his relationship with the mother and the newborn. No validated questionnaire assessing first-time fathers' experiences during childbirth is currently available. Hence, the aim of this study was to develop and validate an instrument to assess first-time fathers’ experiences of childbirth. Method Domains and items were initially derived from interviews with first-time fathers, and supplemented by a literature search and a focus group interview with midwives. The comprehensibility, comprehension and relevance of the items were evaluated by four paternity research experts and a preliminary questionnaire was pilot tested in eight first-time fathers. A revised questionnaire was completed by 200 first-time fathers (response rate = 81%) Exploratory factor analysis using principal component analysis with varimax rotation was performed and multitrait scaling analysis was used to test scaling assumptions. External validity was assessed by means of known-groups analysis. Results Factor analysis yielded four factors comprising 22 items and accounting 48% of the variance. The domains found were Worry, Information, Emotional support and Acceptance. Multitrait analysis confirmed the convergent and discriminant validity of the domains; however, Cronbach’s alpha did not meet conventional reliability standards in two domains. The questionnaire was sensitive to differences between groups of fathers hypothesized to differ on important socio demographic or clinical variables. Conclusions The questionnaire adequately measures important dimensions of first-time fathers’ childbirth experience and may be used to assess aspects of fathers’ experiences during childbirth. To obtain the FTFQ and permission for its use, please contact the corresponding author. PMID:22594834

Father for the first time--development and validation of a questionnaire to assess fathers' experiences of first childbirth (FTFQ).

PubMed

Premberg, Åsa; Taft, Charles; Hellström, Anna-Lena; Berg, Marie

2012-05-17

A father's experience of the birth of his first child is important not only for his birth-giving partner but also for the father himself, his relationship with the mother and the newborn. No validated questionnaire assessing first-time fathers' experiences during childbirth is currently available. Hence, the aim of this study was to develop and validate an instrument to assess first-time fathers' experiences of childbirth. Domains and items were initially derived from interviews with first-time fathers, and supplemented by a literature search and a focus group interview with midwives. The comprehensibility, comprehension and relevance of the items were evaluated by four paternity research experts and a preliminary questionnaire was pilot tested in eight first-time fathers. A revised questionnaire was completed by 200 first-time fathers (response rate = 81%) Exploratory factor analysis using principal component analysis with varimax rotation was performed and multitrait scaling analysis was used to test scaling assumptions. External validity was assessed by means of known-groups analysis. Factor analysis yielded four factors comprising 22 items and accounting 48% of the variance. The domains found were Worry, Information, Emotional support and Acceptance. Multitrait analysis confirmed the convergent and discriminant validity of the domains; however, Cronbach's alpha did not meet conventional reliability standards in two domains. The questionnaire was sensitive to differences between groups of fathers hypothesized to differ on important socio demographic or clinical variables. The questionnaire adequately measures important dimensions of first-time fathers' childbirth experience and may be used to assess aspects of fathers' experiences during childbirth. To obtain the FTFQ and permission for its use, please contact the corresponding author.

The Play Experience Scale: development and validation of a measure of play.

PubMed

Pavlas, Davin; Jentsch, Florian; Salas, Eduardo; Fiore, Stephen M; Sims, Valerie

2012-04-01

A measure of play experience in video games was developed through literature review and two empirical validation studies. Despite the considerable attention given to games in the behavioral sciences, play experience remains empirically underexamined. One reason for this gap is the absence of a scale that measures play experience. In Study 1, the initial Play Experience Scale (PES) was tested through an online validation that featured three different games (N = 203). In Study 2, a revised PES was assessed with a serious game in the laboratory (N = 77). Through principal component analysis of the Study 1 data, the initial 20-item PES was revised, resulting in the 16-item PES-16. Study 2 showed the PES-16 to be a robust instrument with the same patterns of correlations as in Study 1 via (a) internal consistency estimates, (b) correlations with established scales of motivation, (c) distributions of PES-16 scores in different game conditions, and (d) examination of the average variance extracted of the PES and the Intrinsic Motivation Scale. We suggest that the PES is appropriate for use in further validation studies. Additional examinations of the scale are required to determine its applicability to other contexts and its relationship with other constructs. The PES is potentially relevant to human factors undertakings involving video games, including basic research into play, games, and learning; prototype testing; and exploratory learning studies.

The Development and Validation of the School-Based Counseling Self-Efficacy Scale

ERIC Educational Resources Information Center

Boughfman, Erica M.

2010-01-01

The purpose of this study was to develop and validate the School-Based Counseling Self-Efficacy Scale (SB-SES). Two hundred sixty-five (N = 265) licensed mental health professionals participated in this study. Fifty-eight percent of the participants reported experience working as a school-based counselor with the remaining 42% reporting no…

HPLC-MS/MS method for dexmedetomidine quantification with Design of Experiments approach: application to pediatric pharmacokinetic study.

PubMed

Szerkus, Oliwia; Struck-Lewicka, Wiktoria; Kordalewska, Marta; Bartosińska, Ewa; Bujak, Renata; Borsuk, Agnieszka; Bienert, Agnieszka; Bartkowska-Śniatkowska, Alicja; Warzybok, Justyna; Wiczling, Paweł; Nasal, Antoni; Kaliszan, Roman; Markuszewski, Michał Jan; Siluk, Danuta

2017-02-01

The purpose of this work was to develop and validate a rapid and robust LC-MS/MS method for the determination of dexmedetomidine (DEX) in plasma, suitable for analysis of a large number of samples. Systematic approach, Design of Experiments, was applied to optimize ESI source parameters and to evaluate method robustness, therefore, a rapid, stable and cost-effective assay was developed. The method was validated according to US FDA guidelines. LLOQ was determined at 5 pg/ml. The assay was linear over the examined concentration range (5-2500 pg/ml), Results: Experimental design approach was applied for optimization of ESI source parameters and evaluation of method robustness. The method was validated according to the US FDA guidelines. LLOQ was determined at 5 pg/ml. The assay was linear over the examined concentration range (R 2 > 0.98). The accuracies, intra- and interday precisions were less than 15%. The stability data confirmed reliable behavior of DEX under tested conditions. Application of Design of Experiments approach allowed for fast and efficient analytical method development and validation as well as for reduced usage of chemicals necessary for regular method optimization. The proposed technique was applied to determination of DEX pharmacokinetics in pediatric patients undergoing long-term sedation in the intensive care unit.

External Standards or Standard Addition? Selecting and Validating a Method of Standardization

NASA Astrophysics Data System (ADS)

Harvey, David T.

2002-05-01

A common feature of many problem-based laboratories in analytical chemistry is a lengthy independent project involving the analysis of "real-world" samples. Students research the literature, adapting and developing a method suitable for their analyte, sample matrix, and problem scenario. Because these projects encompass the complete analytical process, students must consider issues such as obtaining a representative sample, selecting a method of analysis, developing a suitable standardization, validating results, and implementing appropriate quality assessment/quality control practices. Most textbooks and monographs suitable for an undergraduate course in analytical chemistry, however, provide only limited coverage of these important topics. The need for short laboratory experiments emphasizing important facets of method development, such as selecting a method of standardization, is evident. The experiment reported here, which is suitable for an introductory course in analytical chemistry, illustrates the importance of matrix effects when selecting a method of standardization. Students also learn how a spike recovery is used to validate an analytical method, and obtain a practical experience in the difference between performing an external standardization and a standard addition.

SCALE TSUNAMI Analysis of Critical Experiments for Validation of 233U Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mueller, Don; Rearden, Bradley T

2009-01-01

Oak Ridge National Laboratory (ORNL) staff used the SCALE TSUNAMI tools to provide a demonstration evaluation of critical experiments considered for use in validation of current and anticipated operations involving {sup 233}U at the Radiochemical Development Facility (RDF). This work was reported in ORNL/TM-2008/196 issued in January 2009. This paper presents the analysis of two representative safety analysis models provided by RDF staff.

Outsourcing bioanalytical services at Janssen Research and Development: the sequel anno 2017.

PubMed

Dillen, Lieve; Verhaeghe, Tom

2017-08-01

The strategy of outsourcing bioanalytical services at Janssen has been evolving over the last years and an update will be given on the recent changes in our processes. In 2016, all internal GLP-related activities were phased out and this decision lead to the re-orientation of the in-house bioanalytical activities. As a consequence, in-depth experience with the validated bioanalytical assays for new drug candidates is currently gained together with the external partner, since development and validation of the assay and execution of GLP preclinical studies are now transferred to the CRO. The evolution to externalize more bioanalytical support has created opportunities to build even stronger partnerships with the CROs and to refocus internal resources. Case studies are presented illustrating challenges encountered during method development and validation at preferred partners when limited internal experience is obtained or with introduction of new technology.

EOS Terra Validation Program

NASA Technical Reports Server (NTRS)

Starr, David

1999-01-01

The EOS Terra mission will be launched in July 1999. This mission has great relevance to the atmospheric radiation community and global change issues. Terra instruments include ASTER, CERES, MISR, MODIS and MOPITT. In addition to the fundamental radiance data sets, numerous global science data products will be generated, including various Earth radiation budget, cloud and aerosol parameters, as well as land surface, terrestrial ecology, ocean color, and atmospheric chemistry parameters. Significant investments have been made in on-board calibration to ensure the quality of the radiance observations. A key component of the Terra mission is the validation of the science data products. This is essential for a mission focused on global change issues and the underlying processes. The Terra algorithms have been subject to extensive pre-launch testing with field data whenever possible. Intensive efforts will be made to validate the Terra data products after launch. These include validation of instrument calibration (vicarious calibration) experiments, instrument and cross-platform comparisons, routine collection of high quality correlative data from ground-based networks, such as AERONET, and intensive sites, such as the SGP ARM site, as well as a variety field experiments, cruises, etc. Airborne simulator instruments have been developed for the field experiment and underflight activities including the MODIS Airborne Simulator (MAS), AirMISR, MASTER (MODIS-ASTER), and MOPITT-A. All are integrated on the NASA ER-2, though low altitude platforms are more typically used for MASTER. MATR is an additional sensor used for MOPITT algorithm development and validation. The intensive validation activities planned for the first year of the Terra mission will be described with emphasis on derived geophysical parameters of most relevance to the atmospheric radiation community. Detailed information about the EOS Terra validation Program can be found on the EOS Validation program homepage i/e.: http://ospso.gsfc.nasa.gov/validation/valpage.html).

Unforgiveness: Refining theory and measurement of an understudied construct.

PubMed

Stackhouse, Madelynn R D; Jones Ross, Rachel W; Boon, Susan D

2018-01-01

This research presents a multidimensional conceptualization of unforgiveness and the development and validation of the unforgiveness measure (UFM). The scale was developed based on a qualitative study of people's experiences of unforgiven interpersonal offences (Study 1). Three dimensions of unforgiveness emerged (Study 2): emotional-ruminative unforgiveness, cognitive-evaluative unforgiveness, and offender reconstrual. We supported the scale's factor structure, reliability, and validity (Study 3). We also established the convergent and discriminant validity of the UFM with measures of negative affect, rumination, forgiveness, cognitive reappraisal, and emotional suppression (Study 4). Together, our results suggest that the UFM can capture variability in victims' unforgiving experiences in the aftermath of interpersonal transgressions. Implications for understanding the construct of unforgiveness and directions for future research are discussed. © 2017 The British Psychological Society.

Development, Validity, and Reliability of the Campus Residential Experience Survey

ERIC Educational Resources Information Center

Sriram, Rishi; Scales, Laine; Shushok, Frank, Jr.

2017-01-01

The importance of living on campus is well established, but extant research that examines administrator perceptions of what comprises the best educational experience for students living on campus is generally unavailable. This study reports the development of a psychometric instrument designed to uncover underlying paradigms and attitudes of…

Validation of a dye stain assay for vaginally inserted HEC-filled microbicide applicators

PubMed Central

Katzen, Lauren L.; Fernández-Romero, José A.; Sarna, Avina; Murugavel, Kailapuri G.; Gawarecki, Daniel; Zydowsky, Thomas M.; Mensch, Barbara S.

2011-01-01

Background The reliability and validity of self-reports of vaginal microbicide use are questionable given the explicit understanding that participants are expected to comply with study protocols. Our objective was to optimize the Population Council's previously validated dye stain assay (DSA) and related procedures, and establish predictive values for the DSA's ability to identify vaginally inserted single-use, low-density polyethylene microbicide applicators filled with hydroxyethylcellulose gel. Methods Applicators, inserted by 252 female sex workers enrolled in a microbicide feasibility study in Southern India, served as positive controls for optimization and validation experiments. Prior to validation, optimal dye concentration and staining time were ascertained. Three validation experiments were conducted to determine sensitivity, specificity, negative predictive values and positive predictive values. Results The dye concentration of 0.05% (w/v) FD&C Blue No. 1 Granular Food Dye and staining time of five seconds were determined to be optimal and were used for the three validation experiments. There were a total of 1,848 possible applicator readings across validation experiments; 1,703 (92.2%) applicator readings were correct. On average, the DSA performed with 90.6% sensitivity, 93.9% specificity, and had a negative predictive value of 93.8% and a positive predictive value of 91.0%. No statistically significant differences between experiments were noted. Conclusions The DSA was optimized and successfully validated for use with single-use, low-density polyethylene applicators filled with hydroxyethylcellulose (HEC) gel. We recommend including the DSA in future microbicide trials involving vaginal gels in order to identify participants who have low adherence to dosing regimens. In doing so, we can develop strategies to improve adherence as well as investigate the association between product use and efficacy. PMID:21992983

Assessing Quality of Life in Older Adult Patients with Skin Disorders

PubMed Central

Farage, Miranda A.; Miller, Kenneth W.; Sherman, Susan N.; Tsevat, Joel

2012-01-01

Significance for Public Health The global population is aging. In the industrial world, adults over 65 outnumber children and comprise almost 20% of the population in some countries. Older adults experience a number of skin diseases and disorders that substantially affect their quality of life. Opportunity exists for developing and validating health-related quality of life (HRQoL) measures specifically for dermatological conditions most pertinent to older patients. Older adults experience a number of skin diseases and disorders that substantially affect quality of life. In the last two decades, a number of instruments have been developed for use among general dermatology patients to assess the effects of treatment and disease progression, perceptions of well-being, and the value that patients place on their dermatologic state of health. This chapter reviews some health-related quality of life (HRQoL) (HRQoL) measures developed and validated specifically for dermatological conditions. However, opportunity exists for developing and validating HRQoL measures specifically for dermatological conditions most pertinent to older patients. PMID:22980159

Validation of the thermal transport model used for ITER startup scenario predictions with DIII-D experimental data

DOE PAGES

Casper, T. A.; Meyer, W. H.; Jackson, G. L.; ...

2010-12-08

We are exploring characteristics of ITER startup scenarios in similarity experiments conducted on the DIII-D Tokamak. In these experiments, we have validated scenarios for the ITER current ramp up to full current and developed methods to control the plasma parameters to achieve stability. Predictive simulations of ITER startup using 2D free-boundary equilibrium and 1D transport codes rely on accurate estimates of the electron and ion temperature profiles that determine the electrical conductivity and pressure profiles during the current rise. Here we present results of validation studies that apply the transport model used by the ITER team to DIII-D discharge evolutionmore » and comparisons with data from our similarity experiments.« less

Development and initial validation of primary care provider mental illness management and team-based care self-efficacy scales.

PubMed

Loeb, Danielle F; Crane, Lori A; Leister, Erin; Bayliss, Elizabeth A; Ludman, Evette; Binswanger, Ingrid A; Kline, Danielle M; Smith, Meredith; deGruy, Frank V; Nease, Donald E; Dickinson, L Miriam

Develop and validate self-efficacy scales for primary care provider (PCP) mental illness management and team-based care participation. We developed three self-efficacy scales: team-based care (TBC), mental illness management (MIM), and chronic medical illness (CMI). We developed the scales using Bandura's Social Cognitive Theory as a guide. The survey instrument included items from previously validated scales on team-based care and mental illness management. We administered a mail survey to 900 randomly selected Colorado physicians. We conducted exploratory principal factor analysis with oblique rotation. We constructed self-efficacy scales and calculated standardized Cronbach's alpha coefficients to test internal consistency. We calculated correlation coefficients between the MIM and TBC scales and previously validated measures related to each scale to evaluate convergent validity. We tested correlations between the TBC and the measures expected to correlate with the MIM scale and vice versa to evaluate discriminant validity. PCPs (n=402, response rate=49%) from diverse practice settings completed surveys. Items grouped into factors as expected. Cronbach's alphas were 0.94, 0.88, and 0.83 for TBC, MIM, and CMI scales respectively. In convergent validity testing, the TBC scale was correlated as predicted with scales assessing communications strategies, attitudes toward teams, and other teamwork indicators (r=0.25 to 0.40, all statistically significant). Likewise, the MIM scale was significantly correlated with several items about knowledge and experience managing mental illness (r=0.24 to 41, all statistically significant). As expected in discriminant validity testing, the TBC scale had only very weak correlations with the mental illness knowledge and experience managing mental illness items (r=0.03 to 0.12). Likewise, the MIM scale was only weakly correlated with measures of team-based care (r=0.09 to.17). This validation study of MIM and TBC self-efficacy scales showed high internal validity and good construct validity. Copyright © 2016 Elsevier Inc. All rights reserved.

Relationship between a solar drying model of red pepper and the kinetics of pure water evaporation (1)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Passamai, V.; Saravia, L.

1997-05-01

Drying of red pepper under solar radiation was investigated, and a simple model related to water evaporation was developed. Drying experiments at constant laboratory conditions were undertaken where solar radiation was simulated by a 1,000 W lamp. In this first part of the work, water evaporation under radiation is studied and laboratory experiments are presented with two objectives: to verify Penman`s model of evaporation under radiation, and to validate the laboratory experiments. Modifying Penman`s model of evaporation by introducing two drying conductances as a function of water content, allows the development of a drying model under solar radiation. In themore » second part of this paper, the model is validated by applying it to red pepper open air solar drying experiments.« less

Development and validation of the Measure of Indigenous Racism Experiences (MIRE)

PubMed Central

Paradies, Yin C; Cunningham, Joan

2008-01-01

Background In recent decades there has been increasing evidence of a relationship between self-reported racism and health. Although a plethora of instruments to measure racism have been developed, very few have been described conceptually or psychometrically Furthermore, this research field has been limited by a dearth of instruments that examine reactions/responses to racism and by a restricted focus on African American populations. Methods In response to these limitations, the 31-item Measure of Indigenous Racism Experiences (MIRE) was developed to assess self-reported racism for Indigenous Australians. This paper describes the development of the MIRE together with an opportunistic examination of its content, construct and convergent validity in a population health study involving 312 Indigenous Australians. Results Focus group research supported the content validity of the MIRE, and inter-item/scale correlations suggested good construct validity. A good fit with a priori conceptual dimensions was demonstrated in factor analysis, and convergence with a separate item on discrimination was satisfactory. Conclusion The MIRE has considerable utility as an instrument that can assess multiple facets of racism together with responses/reactions to racism among indigenous populations and, potentially, among other ethnic/racial groups. PMID:18426602

Development and validation of the Body and Appearance Self-Conscious Emotions Scale (BASES).

PubMed

Castonguay, Andrée L; Sabiston, Catherine M; Crocker, Peter R E; Mack, Diane E

2014-03-01

The purpose of these studies was to develop a psychometrically sound measure of shame, guilt, authentic pride, and hubristic pride for use in body and appearance contexts. In Study 1, 41 potential items were developed and assessed for item quality and comprehension. In Study 2, a panel of experts (N=8; M=11, SD=6.5 years of experience) reviewed the scale and items for evidence of content validity. Participants in Study 3 (n=135 males, n=300 females) completed the BASES and various body image, personality, and emotion scales. A separate sample (n=155; 35.5% male) in Study 3 completed the BASES twice using a two-week time interval. The BASES subscale scores demonstrated evidence for internal consistency, item-total correlations, concurrent, convergent, incremental, and discriminant validity, and 2-week test-retest reliability. The 4-factor solution was a good fit in confirmatory factor analysis, reflecting body-related shame, guilt, authentic and hubristic pride subscales of the BASES. The development and validation of the BASES may help advance body image and self-conscious emotion research by providing a foundation to examine the unique antecedents and outcomes of these specific emotional experiences. Copyright © 2014 Elsevier Ltd. All rights reserved.

Development of a brief measure of intimate partner violence experiences: the Composite Abuse Scale (Revised)—Short Form (CASR-SF)

PubMed Central

Ford-Gilboe, Marilyn; Wathen, C Nadine; Varcoe, Colleen; MacMillan, Harriet L; Scott-Storey, Kelly; Mantler, Tara; Hegarty, Kelsey; Perrin, Nancy

2016-01-01

Objectives Approaches to measuring intimate partner violence (IPV) in populations often privilege physical violence, with poor assessment of other experiences. This has led to underestimating the scope and impact of IPV. The aim of this study was to develop a brief, reliable and valid self-report measure of IPV that adequately captures its complexity. Design Mixed-methods instrument development and psychometric testing to evolve a brief version of the Composite Abuse Scale (CAS) using secondary data analysis and expert feedback. Setting Data from 5 Canadian IPV studies; feedback from international IPV experts. Participants 31 international IPV experts including academic researchers, service providers and policy actors rated CAS items via an online survey. Pooled data from 6278 adult Canadian women were used for scale development. Primary/secondary outcome measures Scale reliability and validity; robustness of subscales assessing different IPV experiences. Results A 15-item version of the CAS has been developed (Composite Abuse Scale (Revised)—Short Form, CASR-SF), including 12 items developed from the original CAS and 3 items suggested through expert consultation and the evolving literature. Items cover 3 abuse domains: physical, sexual and psychological, with questions asked to assess lifetime, recent and current exposure, and abuse frequency. Factor loadings for the final 3-factor solution ranged from 0.81 to 0.91 for the 6 psychological abuse items, 0.63 to 0.92 for the 4 physical abuse items, and 0.85 and 0.93 for the 2 sexual abuse items. Moderate correlations were observed between the CASR-SF and measures of depression, post-traumatic stress disorder and coercive control. Internal consistency of the CASR-SF was 0.942. These reliability and validity estimates were comparable to those obtained for the original 30-item CAS. Conclusions The CASR-SF is brief self-report measure of IPV experiences among women that has demonstrated initial reliability and validity and is suitable for use in population studies or other studies. Additional validation of the 15-item scale with diverse samples is required. PMID:27927659

Josh Gesick | NREL

Science.gov Websites

Expertise Chemical / Systems Engineer with over 15 years of experience developing, evaluating, validating . Department of Energy. Research Interests Developing new technologies from concept to commercial application

Validation and Application of Pharmacokinetic Models for Interspecies Extrapolations in Toxicity Risk Assessments of Volatile Organics

DTIC Science & Technology

1989-07-21

formulation of physiologically-based pharmacokinetic models. Adult male Sprague-Dawley rats and male beagle dogs will be administered equal doses...experiments in the 0 dog . Physiologically-based pharmacokinetic models will be developed and validated for oral and inhalation exposures to halocarbons...of conducting experiments in dogs . The original physiolo ic model for the rat will be scaled up to predict halocarbon pharmacokinetics in the dog . The

A Closer Look at the Camp Experience: Examining Relationships between Life Skills, Elements of Positive Youth Development, and Antecedents of Change among Camp Alumni

ERIC Educational Resources Information Center

Garst, Barry A.; Gagnon, Ryan J.; Whittington, Anja

2016-01-01

Understanding program components that contribute to positive youth outcomes following camp experiences can help program providers bring a greater level of intentionality to their efforts. The purposes of this study were twofold: (a) to develop reliable and valid measures of life skill development, elements of positive youth development (PYD), and…

An intercomparison of a large ensemble of statistical downscaling methods for Europe: Overall results from the VALUE perfect predictor cross-validation experiment

NASA Astrophysics Data System (ADS)

Gutiérrez, Jose Manuel; Maraun, Douglas; Widmann, Martin; Huth, Radan; Hertig, Elke; Benestad, Rasmus; Roessler, Ole; Wibig, Joanna; Wilcke, Renate; Kotlarski, Sven

2016-04-01

VALUE is an open European network to validate and compare downscaling methods for climate change research (http://www.value-cost.eu). A key deliverable of VALUE is the development of a systematic validation framework to enable the assessment and comparison of both dynamical and statistical downscaling methods. This framework is based on a user-focused validation tree, guiding the selection of relevant validation indices and performance measures for different aspects of the validation (marginal, temporal, spatial, multi-variable). Moreover, several experiments have been designed to isolate specific points in the downscaling procedure where problems may occur (assessment of intrinsic performance, effect of errors inherited from the global models, effect of non-stationarity, etc.). The list of downscaling experiments includes 1) cross-validation with perfect predictors, 2) GCM predictors -aligned with EURO-CORDEX experiment- and 3) pseudo reality predictors (see Maraun et al. 2015, Earth's Future, 3, doi:10.1002/2014EF000259, for more details). The results of these experiments are gathered, validated and publicly distributed through the VALUE validation portal, allowing for a comprehensive community-open downscaling intercomparison study. In this contribution we describe the overall results from Experiment 1), consisting of a European wide 5-fold cross-validation (with consecutive 6-year periods from 1979 to 2008) using predictors from ERA-Interim to downscale precipitation and temperatures (minimum and maximum) over a set of 86 ECA&D stations representative of the main geographical and climatic regions in Europe. As a result of the open call for contribution to this experiment (closed in Dec. 2015), over 40 methods representative of the main approaches (MOS and Perfect Prognosis, PP) and techniques (linear scaling, quantile mapping, analogs, weather typing, linear and generalized regression, weather generators, etc.) were submitted, including information both data (downscaled values) and metadata (characterizing different aspects of the downscaling methods). This constitutes the largest and most comprehensive to date intercomparison of statistical downscaling methods. Here, we present an overall validation, analyzing marginal and temporal aspects to assess the intrinsic performance and added value of statistical downscaling methods at both annual and seasonal levels. This validation takes into account the different properties/limitations of different approaches and techniques (as reported in the provided metadata) in order to perform a fair comparison. It is pointed out that this experiment alone is not sufficient to evaluate the limitations of (MOS) bias correction techniques. Moreover, it also does not fully validate PP since we don't learn whether we have the right predictors and whether the PP assumption is valid. These problems will be analyzed in the subsequent community-open VALUE experiments 2) and 3), which will be open for participation along the present year.

Coping With Existential and Emotional Challenges: Development and Validation of the Self-Competence in Death Work Scale.

PubMed

Chan, Wallace Chi Ho; Tin, Agnes Fong; Wong, Karen Lok Yi

2015-07-01

Palliative care professionals often are confronted by death in their work. They may experience challenges to self, such as aroused emotions and queries about life's meaningfulness. Assessing their level of "self-competence" in coping with these challenges is crucial in understanding their needs in death work. This study aims to develop and validate the Self-Competence in Death Work Scale (SC-DWS). Development of this scale involved three steps: 1) items generated from a qualitative study with palliative care professionals, (2) expert panel review, and (3) pilot test. Analysis was conducted to explore the factor structure and examine the reliability and validity of the scale. Helping professionals involved in death work were recruited to complete questionnaires comprising the SC-DWS and other scales. A total of 151 participants were recruited. Both one-factor and two-factor structures were found. Emotional and existential coping were identified as subscales in the two-factor structure. Correlations of the whole scale and subscales with measures of death attitudes, meaning in life, burnout and depression provided evidence for the construct validity. Discriminative validity was supported by showing participants with bereavement experience and longer experience in the profession and death work possessed a significantly higher level of self-competence. Reliability analyses showed that the entire scale and subscales were internally consistent. The SC-DWS was found to be valid and reliable. This scale may facilitate helping professionals' understanding of their self-competence in death work, so appropriate professional support and training may be obtained. Copyright © 2015 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

Development and evaluation of the EOL-ICDQ as a measure of experiences, attitudes and knowledge in end-of-life in patients living with an implantable cardioverter defibrillator.

PubMed

Thylén, Ingela; Wenemark, Marika; Fluur, Christina; Strömberg, Anna; Bolse, Kärstin; Årestedt, Kristofer

2014-04-01

Due to extended indications and resynchronization therapy, many implantable cardioverter defibrillator (ICD) recipients will experience progressive co-morbid conditions and will be more likely to die of causes other than cardiac death. It is therefore important to elucidate the ICD patients' preferences when nearing end-of-life. Instead of avoiding the subject of end-of-life, a validated questionnaire may be helpful to explore patients' experiences and attitudes about end-of-life concerns and to assess knowledge of the function of the ICD in end-of-life. Validated instruments assessing patients' perspective concerning end-of-life issues are scarce. The purpose of this study was to develop and evaluate respondent satisfaction and measurement properties of the 'Experiences, Attitudes and Knowledge of End-of-Life Issues in Implantable Cardioverter Defibrillator Patients' Questionnaire' (EOL-ICDQ). The instrument was tested for validity, respondent satisfaction, and for homogeneity and stability in the Swedish language. An English version of the EOL-ICDQ was validated, but has not yet been pilot tested. The final instrument contained three domains, which were clustered into 39 items measuring: experiences (10 items), attitudes (18 items), and knowledge (11 items) of end-of-life concerns in ICD patients. In addition, the questionnaire also contained items on socio-demographic background (six items) and ICD-specific background (eight items). The validity and reliability properties were considered sufficient. The EOL-ICDQ has the potential to be used in clinical practice and future research. Further studies are needed using this instrument in an Anglo-Saxon context with a sample of English-speaking ICD recipients.

In-Flight Thermal Performance of the Lidar In-Space Technology Experiment

NASA Technical Reports Server (NTRS)

Roettker, William

1995-01-01

The Lidar In-Space Technology Experiment (LITE) was developed at NASA s Langley Research Center to explore the applications of lidar operated from an orbital platform. As a technology demonstration experiment, LITE was developed to gain experience designing and building future operational orbiting lidar systems. Since LITE was the first lidar system to be flown in space, an important objective was to validate instrument design principles in such areas as thermal control, laser performance, instrument alignment and control, and autonomous operations. Thermal and structural analysis models of the instrument were developed during the design process to predict the behavior of the instrument during its mission. In order to validate those mathematical models, extensive engineering data was recorded during all phases of LITE's mission. This inflight engineering data was compared with preflight predictions and, when required, adjustments to the thermal and structural models were made to more accurately match the instrument s actual behavior. The results of this process for the thermal analysis and design of LITE are presented in this paper.

Further development of the talent development environment questionnaire for sport.

PubMed

Li, Chunxiao; Wang, Chee Keng John; Pyun, Do Young; Martindale, Russell

2015-01-01

Given the significance of monitoring the critical environmental factors that facilitate athlete performance, this two-phase research aimed to validate and refine the revised talent development environment questionnaire (TDEQ). The TDEQ is a multidimensional self-report scale that assesses talented athletes' environmental experiences. Study 1 (the first phase) involved the examination of the revised TDEQ through an exploratory factor analysis (n = 363). This exploratory investigation identified a 28-item five-factor structure (i.e., TDEQ-5) with adequate internal consistency. Study 2 (the second phase) examined the factorial structure of the TDEQ-5, including convergent validity, discriminant validity, and group invariance (i.e., gender and sports type). The second phase was carried out with 496 talented athletes through the application of confirmatory factor analyses and multigroup invariance tests. The results supported the convergent validity, discriminant validity, and group invariance of the TDEQ-5. In conclusion, the TDEQ-5 with 25 items appears to be a reliable and valid scale for use in talent development environments.

Computational Design and Discovery of Ni-Based Alloys and Coatings: Thermodynamic Approaches Validated by Experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Zi-Kui; Gleeson, Brian; Shang, Shunli

This project developed computational tools that can complement and support experimental efforts in order to enable discovery and more efficient development of Ni-base structural materials and coatings. The project goal was reached through an integrated computation-predictive and experimental-validation approach, including first-principles calculations, thermodynamic CALPHAD (CALculation of PHAse Diagram), and experimental investigations on compositions relevant to Ni-base superalloys and coatings in terms of oxide layer growth and microstructure stabilities. The developed description included composition ranges typical for coating alloys and, hence, allow for prediction of thermodynamic properties for these material systems. The calculation of phase compositions, phase fraction, and phase stabilities,more » which are directly related to properties such as ductility and strength, was a valuable contribution, along with the collection of computational tools that are required to meet the increasing demands for strong, ductile and environmentally-protective coatings. Specifically, a suitable thermodynamic description for the Ni-Al-Cr-Co-Si-Hf-Y system was developed for bulk alloy and coating compositions. Experiments were performed to validate and refine the thermodynamics from the CALPHAD modeling approach. Additionally, alloys produced using predictions from the current computational models were studied in terms of their oxidation performance. Finally, results obtained from experiments aided in the development of a thermodynamic modeling automation tool called ESPEI/pycalphad - for more rapid discovery and development of new materials.« less

Face and content validation of a novel three-dimensional printed temporal bone for surgical skills development.

PubMed

Da Cruz, M J; Francis, H W

2015-07-01

To assess the face and content validity of a novel synthetic, three-dimensional printed temporal bone for surgical skills development and training. A synthetic temporal bone was printed using composite materials and three-dimensional printing technology. Surgical trainees were asked to complete three structured temporal bone dissection exercises. Attitudes and impressions were then assessed using a semi-structured questionnaire. Previous cadaver and real operating experiences were used as a reference. Trainees' experiences of the synthetic temporal bone were analysed in terms of four domains: anatomical realism, usefulness as a training tool, task-based usefulness and overall reactions. Responses across all domains indicated a high degree of acceptance, suggesting that the three-dimensional printed temporal bone was a useful tool in skills development. A sophisticated three-dimensional printed temporal bone that demonstrates face and content validity was developed. The efficiency in cost savings coupled with low associated biohazards make it likely that the printed temporal bone will be incorporated into traditional temporal bone skills development programmes in the near future.

DSMC Simulations of Hypersonic Flows and Comparison With Experiments

NASA Technical Reports Server (NTRS)

Moss, James N.; Bird, Graeme A.; Markelov, Gennady N.

2004-01-01

This paper presents computational results obtained with the direct simulation Monte Carlo (DSMC) method for several biconic test cases in which shock interactions and flow separation-reattachment are key features of the flow. Recent ground-based experiments have been performed for several biconic configurations, and surface heating rate and pressure measurements have been proposed for code validation studies. The present focus is to expand on the current validating activities for a relatively new DSMC code called DS2V that Bird (second author) has developed. Comparisons with experiments and other computations help clarify the agreement currently being achieved between computations and experiments and to identify the range of measurement variability of the proposed validation data when benchmarked with respect to the current computations. For the test cases with significant vibrational nonequilibrium, the effect of the vibrational energy surface accommodation on heating and other quantities is demonstrated.

Validity And Practicality of Experiment Integrated Guided Inquiry-Based Module on Topic of Colloidal Chemistry for Senior High School Learning

NASA Astrophysics Data System (ADS)

Andromeda, A.; Lufri; Festiyed; Ellizar, E.; Iryani, I.; Guspatni, G.; Fitri, L.

2018-04-01

This Research & Development study aims to produce a valid and practical experiment integrated guided inquiry based module on topic of colloidal chemistry. 4D instructional design model was selected in this study. Limited trial of the product was conducted at SMAN 7 Padang. Instruments used were validity and practicality questionnaires. Validity and practicality data were analyzed using Kappa moment. Analysis of the data shows that Kappa moment for validity was 0.88 indicating a very high degree of validity. Kappa moments for the practicality from students and teachers were 0.89 and 0.95 respectively indicating high degree of practicality. Analysis on the module filled in by students shows that 91.37% students could correctly answer critical thinking, exercise, prelab, postlab and worksheet questions asked in the module. These findings indicate that the integrated guided inquiry based module on topic of colloidal chemistry was valid and practical for chemistry learning in senior high school.

Development of chemistry attitudes and experiences questionnaire (CAEQ)

NASA Astrophysics Data System (ADS)

Dalgety, Jacinta; Coll, Richard K.; Jones, Alister

2003-09-01

In this article we describe the development of the Chemistry Attitudes and Experiences Questionnaire (CAEQ) that measures first-year university chemistry students' attitude toward chemistry, chemistry self-efficacy, and learning experiences. The instrument was developed as part of a larger study and sought to fulfill a need for an instrument to investigate factors that influence student enrollment choice. We set out to design the instrument in a manner that would maximize construct validity. The CAEQ was piloted with a cohort of science and technology students (n = 129) at the end of their first year. Based on statistical analysis the instrument was modified and subsequently administered on two occasions at two tertiary institutions (n = 669). Statistical data along with additional data gathered from interviews suggest that the CAEQ possesses good construct validity and will prove a useful tool for tertiary level educators who wish to gain an understanding of factors that influence student choice of chemistry enrolment.

Fun and games in reviewing neonatal emergency care.

PubMed

Gordon, D W; Brown, H N

1995-04-01

To develop a game-based review instrument for use by newborn caregivers in preparing for emergency situations. One hundred and one test questions covering pathophysiology, resuscitation, and medications were developed. The questions then underwent expert and peer review, psychometric testing for content validity and test-retest reliability, and a game trial. The needs of adult learners are different from those of other learners. The gaming format uses knowledge gained through experience and provides an avenue for validating knowledge and sharing experiences. This format has been found effective for review and reinforcement of facts. Twelve nurses participated in a trial game and completed a written evaluation using a Likert scale. The Neonatal Emergency Trivia Game is an effective tool for reviewing material related to neonatal emergency care decisions. Additional testing with a larger group would strengthen validity and reliability data.

Extension and Validation of a Hybrid Particle-Finite Element Method for Hypervelocity Impact Simulation. Chapter 2

NASA Technical Reports Server (NTRS)

Fahrenthold, Eric P.; Shivarama, Ravishankar

2004-01-01

The hybrid particle-finite element method of Fahrenthold and Horban, developed for the simulation of hypervelocity impact problems, has been extended to include new formulations of the particle-element kinematics, additional constitutive models, and an improved numerical implementation. The extended formulation has been validated in three dimensional simulations of published impact experiments. The test cases demonstrate good agreement with experiment, good parallel speedup, and numerical convergence of the simulation results.

[Systemic validation of clinical practice guidelines: the AGREE network].

PubMed

Hannes, K; Van Royen, P; Aertgeerts, B; Buntinx, F; Ramaekers, D; Chevalier, P

2005-12-01

Over recent decades, the number of available clinical practice guidelines has enormously grown. Guidelines should meet specific quality criteria to ensure good quality. There is a growing need for the developement of a set of criteria to ensure that potential biases inherent in guideline development have been properly addressed and that the recommendations for practice are valid and reliable. The AGREE-collaboration is an international network that developed an instrument to critically appraise the methodological quality of guidelines. AGREE promotes a clear strategy to produce, disseminate and evaluate guidelines of high quality. In the first phase of the international project the AGREE-instrument was tested in 11 different countries. Based on this experience the instrument was refined and optimised. In the second phase it was disseminated, promoted and evaluated in 18 participating countries. Belgium was one of them. The Belgian partner in the AGREE-project developed 3 workshops and established 13 validation committees to validate guidelines from Belgian developer groups. We collected 33 questionnaires from participants of the workshops and the validation committees, in which we asked for primary experiences and information on the usefulness and applicability of the instrument. We were also interested in the shortcomings of the instrument and potential strategies to bridge them. More efforts should be made to train methodological experts to gain certain skills for a critical appraisal of clinical practice guidelines. Promoting the AGREE-instrument will lead to a broader knowledge and use of quality criteria in guideline development and appraisal. The development and dissemination of an international list of criteria to appraise the quality of guidelines will stimulate the development of methodologically sound guidelines. International comparisons between existing guidelines will lead to a better collaboration between guideline developers throughout the world.

Sonic Boom Research at NASA Dryden: Objectives and Flight Results from the Lift and Nozzle Change Effects on Tail Shock (LaNCETS) Project

NASA Technical Reports Server (NTRS)

Moes, Timothy R.

2009-01-01

The principal objective of the Supersonics Project is to develop and validate multidisciplinary physics-based predictive design, analysis and optimization capabilities for supersonic vehicles. For aircraft, the focus will be on eliminating the efficiency, environmental and performance barriers to practical supersonic flight. Previous flight projects found that a shaped sonic boom could propagate all the way to the ground (F-5 SSBD experiment) and validated design tools for forebody shape modifications (F-5 SSBD and Quiet Spike experiments). The current project, Lift and Nozzle Change Effects on Tail Shock (LaNCETS) seeks to obtain flight data to develop and validate design tools for low-boom tail shock modifications. Attempts will be made to alter the shock structure of NASA's NF-15B TN/837 by changing the lift distribution by biasing the canard positions, changing the plume shape by under- and over-expanding the nozzles, and changing the plume shape using thrust vectoring. Additional efforts will measure resulting shocks with a probing aircraft (F-15B TN/836) and use the results to validate and update predictive tools. Preliminary flight results are presented and are available to provide truth data for developing and validating the CFD tools required to design low-boom supersonic aircraft.

Development of self and peer performance assessment on iodometric titration experiment

NASA Astrophysics Data System (ADS)

Nahadi; Siswaningsih, W.; Kusumaningtyas, H.

2018-05-01

This study aims to describe the process in developing of reliable and valid assessment to measure students’ performance on iodometric titration and the effect of the self and peer assessment on students’ performance. The self and peer-instrument provides valuable feedback for the student performance improvement. The developed assessment contains rubric and task for facilitating self and peer assessment. The participants are 24 students at the second-grade student in certain vocational high school in Bandung. The participants divided into two groups. The first 12 students involved in the validity test of the developed assessment, while the remain 12 students participated for the reliability test. The content validity was evaluated based on the judgment experts. Test result of content validity based on judgment expert show that the developed performance assessment instrument categorized as valid on each task with the realibity classified as very good. Analysis of the impact of the self and peer assessment implementation showed that the peer instrument supported the self assessment.

Current status of clinical education in paramedic programs: a descriptive research project.

PubMed

Grubbs, K C

1997-01-01

Development of competence in exercising therapeutic judgment skills represents the goal of clinical education. Time (clock hours) is not a valid predictor of attainment of competence in paramedic clinical education. Quantity of patient contact experiences facilitates development of judgment skills, and offers a valid measure of progress toward competence. This project uses national survey data from accredited programs to describe the availability and accessibility of patient contact experiences within paramedic clinical education. Data from this local program supplements the national survey results. The components of clinical judgment are enumerated, and strategies to teach and evaluate clinical judgment skills are discussed.

Crazy like a fox. Validity and ethics of animal models of human psychiatric disease.

PubMed

Rollin, Michael D H; Rollin, Bernard E

2014-04-01

Animal models of human disease play a central role in modern biomedical science. Developing animal models for human mental illness presents unique practical and philosophical challenges. In this article we argue that (1) existing animal models of psychiatric disease are not valid, (2) attempts to model syndromes are undermined by current nosology, (3) models of symptoms are rife with circular logic and anthropomorphism, (4) any model must make unjustified assumptions about subjective experience, and (5) any model deemed valid would be inherently unethical, for if an animal adequately models human subjective experience, then there is no morally relevant difference between that animal and a human.

WOLF REXUS EXPERIMENT - European Planetary Science Congress

NASA Astrophysics Data System (ADS)

Buzdugan, A.

2017-09-01

WOLF experiment is developing a reaction wheel-based control system, effectively functioning as active nutation damper. One reaction wheel is used to reduce the undesirable lateral rates of spinning cylindrically symmetric free falling units, ejected from a sounding rocket. Once validated in REXUS flight, the concept and the design developed during WOLF experiment can be used for other application which require a flat spin of the free falling units.

COFS 1 Guest Investigator Program

NASA Technical Reports Server (NTRS)

Fontana, Anthony; Wright, Robert L.

1986-01-01

The process for selecting guest investigators for participation in the Control of Flexible Structures (COFS)-1 program is described. Contracts and grants will be awarded in late CY87. A straw-man list of types of experiments and a distribution of the experiments has been defined to initiate definition of an experiments package which supports development and validation of control structures interaction technology. A schedule of guest investigator participation has been developed.

High-resolution computational algorithms for simulating offshore wind turbines and farms: Model development and validation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Calderer, Antoni; Yang, Xiaolei; Angelidis, Dionysios

2015-10-30

The present project involves the development of modeling and analysis design tools for assessing offshore wind turbine technologies. The computational tools developed herein are able to resolve the effects of the coupled interaction of atmospheric turbulence and ocean waves on aerodynamic performance and structural stability and reliability of offshore wind turbines and farms. Laboratory scale experiments have been carried out to derive data sets for validating the computational models.

A systematic review and appraisal of methods of developing and validating lifestyle cardiovascular disease risk factors questionnaires.

PubMed

Nse, Odunaiya; Quinette, Louw; Okechukwu, Ogah

2015-09-01

Well developed and validated lifestyle cardiovascular disease (CVD) risk factors questionnaires is the key to obtaining accurate information to enable planning of CVD prevention program which is a necessity in developing countries. We conducted this review to assess methods and processes used for development and content validation of lifestyle CVD risk factors questionnaires and possibly develop an evidence based guideline for development and content validation of lifestyle CVD risk factors questionnaires. Relevant databases at the Stellenbosch University library were searched for studies conducted between 2008 and 2012, in English language and among humans. Using the following databases; pubmed, cinahl, psyc info and proquest. Search terms used were CVD risk factors, questionnaires, smoking, alcohol, physical activity and diet. Methods identified for development of lifestyle CVD risk factors were; review of literature either systematic or traditional, involvement of expert and /or target population using focus group discussion/interview, clinical experience of authors and deductive reasoning of authors. For validation, methods used were; the involvement of expert panel, the use of target population and factor analysis. Combination of methods produces questionnaires with good content validity and other psychometric properties which we consider good.

Improved understanding of geologic CO{sub 2} storage processes requires risk-driven field experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oldenburg, C.M.

2011-06-01

The need for risk-driven field experiments for CO{sub 2} geologic storage processes to complement ongoing pilot-scale demonstrations is discussed. These risk-driven field experiments would be aimed at understanding the circumstances under which things can go wrong with a CO{sub 2} capture and storage (CCS) project and cause it to fail, as distinguished from accomplishing this end using demonstration and industrial scale sites. Such risk-driven tests would complement risk-assessment efforts that have already been carried out by providing opportunities to validate risk models. In addition to experimenting with high-risk scenarios, these controlled field experiments could help validate monitoring approaches to improvemore » performance assessment and guide development of mitigation strategies.« less

Longitudinal Measurement Equivalence of Subjective Language Brokering Experiences Scale in Mexican American Adolescents

PubMed Central

Kim, Su Yeong; Hou, Yang; Shen, Yishan; Zhang, Minyu

2016-01-01

Objectives Language brokering occurs frequently in immigrant families and can have significant implications for the well-being of family members involved. The present study aimed to develop and validate a measure that can be used to assess multiple dimensions of subjective language brokering experiences among Mexican American adolescents. Methods Participants were 557 adolescent language brokers (54.2% female, Mage.wave1 =12.96, SD=.94) in Mexican American families. Results Using exploratory and confirmatory factor analyses, we were able to identify seven reliable subscales of language brokering: linguistic benefits, socio-emotional benefits, efficacy, positive parent-child relationships, parental dependence, negative feelings, and centrality. Tests of factorial invariance show that these subscales demonstrate, at minimum, partial strict invariance across time and across experiences of translating for mothers and fathers, and in most cases, also across adolescent gender, nativity, and translation frequency. Thus, in general, the means of the subscales and the relations among the subscales with other variables can be compared across these different occasions and groups. Tests of criterion-related validity demonstrated that these subscales correlated, concurrently and longitudinally, with parental warmth and hostility, parent-child alienation, adolescent family obligation, depressive symptoms, resilience, and life meaning. Conclusions This reliable and valid subjective language brokering experiences scale will be helpful for gaining a better understanding of adolescents’ language brokering experiences with their mothers and fathers, and how such experiences may influence their development. PMID:27362872

Analytical procedure validation and the quality by design paradigm.

PubMed

Rozet, Eric; Lebrun, Pierre; Michiels, Jean-François; Sondag, Perceval; Scherder, Tara; Boulanger, Bruno

2015-01-01

Since the adoption of the ICH Q8 document concerning the development of pharmaceutical processes following a quality by design (QbD) approach, there have been many discussions on the opportunity for analytical procedure developments to follow a similar approach. While development and optimization of analytical procedure following QbD principles have been largely discussed and described, the place of analytical procedure validation in this framework has not been clarified. This article aims at showing that analytical procedure validation is fully integrated into the QbD paradigm and is an essential step in developing analytical procedures that are effectively fit for purpose. Adequate statistical methodologies have also their role to play: such as design of experiments, statistical modeling, and probabilistic statements. The outcome of analytical procedure validation is also an analytical procedure design space, and from it, control strategy can be set.

Experiments And Model Development For The Investigation Of Sooting And Radiation Effects In Microgravity Droplet Combustion

NASA Technical Reports Server (NTRS)

Yozgatligil, Ahmet; Choi, Mun Young; Dryer, Frederick L.; Kazakov, Andrei; Dobashi, Ritsu

2003-01-01

This study involves flight experiments (for droplets between 1.5 to 5 mm) and supportive ground-based experiments, with concurrent numerical model development and validation. The experiments involve two fuels: n-heptane, and ethanol. The diagnostic measurements include light extinction for soot volume fraction, two-wavelength pyrometry and thin-filament pyrometry for temperature, spectral detection for OH chemiluminescence, broadband radiometry for flame emission, and thermophoretic sampling with subsequent transmission electron microscopy for soot aerosol property calculations.

Explicating Experience: Development of a Valid Scale of Past Hazard Experience for Tornadoes.

PubMed

Demuth, Julie L

2018-03-23

People's past experiences with a hazard theoretically influence how they approach future risks. Yet, past hazard experience has been conceptualized and measured in wide-ranging, often simplistic, ways, resulting in mixed findings about its relationship with risk perception. This study develops a scale of past hazard experiences, in the context of tornadoes, that is content and construct valid. A conceptual definition was developed, a set of items were created to measure one's most memorable and multiple tornado experiences, and the measures were evaluated through two surveys of the public who reside in tornado-prone areas. Four dimensions emerged of people's most memorable experience, reflecting their awareness of the tornado risk that day, their personalization of the risk, the intrusive impacts on them personally, and impacts experienced vicariously through others. Two dimensions emerged of people's multiple experiences, reflecting common types of communication received and negative emotional responses. These six dimensions are novel in that they capture people's experience across the timeline of a hazard as well as intangible experiences that are both direct and indirect. The six tornado experience dimensions were correlated with tornado risk perceptions measured as cognitive-affective and as perceived probability of consequences. The varied experience-risk perception results suggest that it is important to understand the nuances of these concepts and their relationships. This study provides a foundation for future work to continue explicating past hazard experience, across different risk contexts, and for understanding its effect on risk assessment and responses. © 2018 Society for Risk Analysis.

Development and Validation of the College Campus Environment Scale (CCES): Promoting Positive College Experiences

ERIC Educational Resources Information Center

Fish, Marian C.; Gefen, Dalia R.; Kaczetow, Walter; Winograd, Greta; Futtersak-Goldberg, Rachel

2016-01-01

One of the essential factors related to student success and satisfaction with a higher education experience is the college environment in which learning takes place. The purpose of this study was to develop a scale, the College Campus Environment Scale (CCES), to measure characteristics of college campus environments valued by students. A model…

Validation experiments to determine radiation partitioning of heat flux to an object in a fully turbulent fire.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ricks, Allen; Blanchat, Thomas K.; Jernigan, Dann A.

2006-06-01

It is necessary to improve understanding and develop validation data of the heat flux incident to an object located within the fire plume for the validation of SIERRA/ FUEGO/SYRINX fire and SIERRA/CALORE. One key aspect of the validation data sets is the determination of the relative contribution of the radiative and convective heat fluxes. To meet this objective, a cylindrical calorimeter with sufficient instrumentation to measure total and radiative heat flux had been designed and fabricated. This calorimeter will be tested both in the controlled radiative environment of the Penlight facility and in a fire environment in the FLAME/Radiant Heatmore » (FRH) facility. Validation experiments are specifically designed for direct comparison with the computational predictions. Making meaningful comparisons between the computational and experimental results requires careful characterization and control of the experimental features or parameters used as inputs into the computational model. Validation experiments must be designed to capture the essential physical phenomena, including all relevant initial and boundary conditions. A significant question of interest to modeling heat flux incident to an object in or near a fire is the contribution of the radiation and convection modes of heat transfer. The series of experiments documented in this test plan is designed to provide data on the radiation partitioning, defined as the fraction of the total heat flux that is due to radiation.« less

Design and Development Computer-Based E-Learning Teaching Material for Improving Mathematical Understanding Ability and Spatial Sense of Junior High School Students

NASA Astrophysics Data System (ADS)

Nurjanah; Dahlan, J. A.; Wibisono, Y.

2017-02-01

This paper aims to make a design and development computer-based e-learning teaching material for improving mathematical understanding ability and spatial sense of junior high school students. Furthermore, the particular aims are (1) getting teaching material design, evaluation model, and intrument to measure mathematical understanding ability and spatial sense of junior high school students; (2) conducting trials computer-based e-learning teaching material model, asessment, and instrument to develop mathematical understanding ability and spatial sense of junior high school students; (3) completing teaching material models of computer-based e-learning, assessment, and develop mathematical understanding ability and spatial sense of junior high school students; (4) resulting research product is teaching materials of computer-based e-learning. Furthermore, the product is an interactive learning disc. The research method is used of this study is developmental research which is conducted by thought experiment and instruction experiment. The result showed that teaching materials could be used very well. This is based on the validation of computer-based e-learning teaching materials, which is validated by 5 multimedia experts. The judgement result of face and content validity of 5 validator shows that the same judgement result to the face and content validity of each item test of mathematical understanding ability and spatial sense. The reliability test of mathematical understanding ability and spatial sense are 0,929 and 0,939. This reliability test is very high. While the validity of both tests have a high and very high criteria.

Students' Self-Evaluation and Reflection (Part 1): "Measurement"

ERIC Educational Resources Information Center

Cambra-Fierro, Jesus; Cambra-Berdun, Jesus

2007-01-01

Purpose: The objective of the paper is the development and validation of scales to assess reflective learning. Design/methodology/approach: The research is based on a literature review plus in-classroom experience. For the scale validation process, exploratory and confirmatory analyses were conducted, following proposals made by Anderson and…

Construction and Initial Validation of the Multiracial Experiences Measure (MEM)

PubMed Central

Yoo, Hyung Chol; Jackson, Kelly; Guevarra, Rudy P.; Miller, Matthew J.; Harrington, Blair

2015-01-01

This article describes the development and validation of the Multiracial Experiences Measure (MEM): a new measure that assesses uniquely racialized risks and resiliencies experienced by individuals of mixed racial heritage. Across two studies, there was evidence for the validation of the 25-item MEM with 5 subscales including Shifting Expressions, Perceived Racial Ambiguity, Creating Third Space, Multicultural Engagement, and Multiracial Discrimination. The 5-subscale structure of the MEM was supported by a combination of exploratory and confirmatory factor analyses. Evidence of criterion-related validity was partially supported with MEM subscales correlating with measures of racial diversity in one’s social network, color-blind racial attitude, psychological distress, and identity conflict. Evidence of discriminant validity was supported with MEM subscales not correlating with impression management. Implications for future research and suggestions for utilization of the MEM in clinical practice with multiracial adults are discussed. PMID:26460977

Construction and initial validation of the Multiracial Experiences Measure (MEM).

PubMed

Yoo, Hyung Chol; Jackson, Kelly F; Guevarra, Rudy P; Miller, Matthew J; Harrington, Blair

2016-03-01

This article describes the development and validation of the Multiracial Experiences Measure (MEM): a new measure that assesses uniquely racialized risks and resiliencies experienced by individuals of mixed racial heritage. Across 2 studies, there was evidence for the validation of the 25-item MEM with 5 subscales including Shifting Expressions, Perceived Racial Ambiguity, Creating Third Space, Multicultural Engagement, and Multiracial Discrimination. The 5-subscale structure of the MEM was supported by a combination of exploratory and confirmatory factor analyses. Evidence of criterion-related validity was partially supported with MEM subscales correlating with measures of racial diversity in one's social network, color-blind racial attitude, psychological distress, and identity conflict. Evidence of discriminant validity was supported with MEM subscales not correlating with impression management. Implications for future research and suggestions for utilization of the MEM in clinical practice with multiracial adults are discussed. (c) 2016 APA, all rights reserved).

Measuring the effects of online health information: Scale validation for the e-Health Impact Questionnaire.

PubMed

Kelly, Laura; Ziebland, Sue; Jenkinson, Crispin

2015-11-01

Health-related websites have developed to be much more than information sites: they are used to exchange experiences and find support as well as information and advice. This paper documents the development of a tool to compare the potential consequences and experiences a person may encounter when using health-related websites. Questionnaire items were developed following a review of relevant literature and qualitative secondary analysis of interviews relating to experiences of health. Item reduction steps were performed on pilot survey data (n=167). Tests of validity and reliability were subsequently performed (n=170) to determine the psychometric properties of the questionnaire. Two independent item pools entered psychometric testing: (1) Items relating to general views of using the internet in relation to health and, (2) Items relating to the consequences of using a specific health-related website. Identified sub-scales were found to have high construct validity, internal consistency and test-retest reliability. Analyses confirmed good psychometric properties in the eHIQ-Part 1 (11 items) and the eHIQ-Part 2 (26 items). This tool will facilitate the measurement of the potential consequences of using websites containing different types of material (scientific facts and figures, blogs, experiences, images) across a range of health conditions. Copyright © 2015 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Development and Validation of the Elder Learning Barriers Scale Among Older Chinese Adults.

PubMed

Wang, Renfeng; De Donder, Liesbeth; De Backer, Free; He, Tao; Van Regenmortel, Sofie; Li, Shihua; Lombaerts, Koen

2017-12-01

This study describes the development and validation of the Elder Learning Barriers (ELB) scale, which seeks to identify the obstacles that affect the level of educational participation of older adults. The process of item pool design and scale development is presented, as well as the testing and scale refinement procedure. The data were collected from a sample of 579 older Chinese adults (aged over 55) in the Xi'an region of China. After randomly splitting the sample for cross-validation purposes, the construct validity of the ELB scale was confirmed containing five dimensions: dispositional, informational, physical, situational, and institutional barriers. Furthermore, developmental differences in factor structure have been examined among older age groups. The results indicated that the scale demonstrated good reliability and validity. We conclude in general that the ELB scale appears to be a valuable instrument for examining the learning barriers that older Chinese citizens experience for participating in organized educational activities.

Increased importance of the documented development stage in process validation.

PubMed

Mohammed-Ziegler, Ildikó; Medgyesi, Ildikó

2012-07-01

Current trends in pharmaceutical quality assurance moved when the Federal Drug Administration (FDA) of the USA published its new guideline on process validation in 2011. This guidance introduced the lifecycle approach of process validation. In this short communication some typical changes from the point of view of practice of API production are addressed in the light of inspection experiences. Some details are compared with the European regulations.

Validation and Continued Development of Methods for Spheromak Simulation

NASA Astrophysics Data System (ADS)

Benedett, Thomas

2017-10-01

The HIT-SI experiment has demonstrated stable sustainment of spheromaks. Determining how the underlying physics extrapolate to larger, higher-temperature regimes is of prime importance in determining the viability of the inductively-driven spheromak. It is thus prudent to develop and validate a computational model that can be used to study current results and study the effect of possible design choices on plasma behavior. An extended MHD model has shown good agreement with experimental data at 14 kHz injector operation. Efforts to extend the existing validation to a range of higher frequencies (36, 53, 68 kHz) using the PSI-Tet 3D extended MHD code will be presented, along with simulations of potential combinations of flux conserver features and helicity injector configurations and their impact on current drive performance, density control, and temperature for future SIHI experiments. Work supported by USDoE.

Multi-Evaporator Miniature Loop Heat Pipe for Small Spacecraft Thermal Control

NASA Technical Reports Server (NTRS)

Ku, Jentung; Ottenstein, Laura; Douglas, Donya

2008-01-01

This paper presents the development of the Thermal Loop experiment under NASA's New Millennium Program Space Technology 8 (ST8) Project. The Thermal Loop experiment was originally planned for validating in space an advanced heat transport system consisting of a miniature loop heat pipe (MLHP) with multiple evaporators and multiple condensers. Details of the thermal loop concept, technical advances and benefits, Level 1 requirements and the technology validation approach are described. An MLHP breadboard has been built and tested in the laboratory and thermal vacuum environments, and has demonstrated excellent performance that met or exceeded the design requirements. The MLHP retains all features of state-of-the-art loop heat pipes and offers additional advantages to enhance the functionality, performance, versatility, and reliability of the system. In addition, an analytical model has been developed to simulate the steady state and transient operation of the MHLP, and the model predictions agreed very well with experimental results. A protoflight MLHP has been built and is being tested in a thermal vacuum chamber to validate its performance and technical readiness for a flight experiment.

Continued Development and Validation of Methods for Spheromak Simulation

NASA Astrophysics Data System (ADS)

Benedett, Thomas

2015-11-01

The HIT-SI experiment has demonstrated stable sustainment of spheromaks; determining how the underlying physics extrapolate to larger, higher-temperature regimes is of prime importance in determining the viability of the inductively-driven spheromak. It is thus prudent to develop and validate a computational model that can be used to study current results and provide an intermediate step between theory and future experiments. A zero-beta Hall-MHD model has shown good agreement with experimental data at 14.5 kHz injector operation. Experimental observations at higher frequency, where the best performance is achieved, indicate pressure effects are important and likely required to attain quantitative agreement with simulations. Efforts to extend the existing validation to high frequency (~ 36-68 kHz) using an extended MHD model implemented in the PSI-TET arbitrary-geometry 3D MHD code will be presented. Results from verification of the PSI-TET extended MHD model using the GEM magnetic reconnection challenge will also be presented along with investigation of injector configurations for future SIHI experiments using Taylor state equilibrium calculations. Work supported by DoE.

Anti-Collision Function Design and Performances of the CNES Formation Flying Experiment on the PRISMA Mission

NASA Technical Reports Server (NTRS)

Cayeux, P.; Raballand, F.; Borde, J.; Berges, J.-C.; Meyssignac, B.

2007-01-01

Within the framework of a partnership agreement, EADS ASTRIUM has worked since June 2006 for the CNES formation flying experiment on the PRISMA mission. EADS ASTRIUM is responsible for the anti-collision function. This responsibility covers the design and the development of the function as a Matlab/Simulink library, as well as its functional validation and performance assessment. PRISMA is a technology in-orbit testbed mission from the Swedish National Space Board, mainly devoted to formation flying demonstration. PRISMA is made of two micro-satellites that will be launched in 2009 on a quasi-circular SSO at about 700 km of altitude. The CNES FFIORD experiment embedded on PRISMA aims at flight validating an FFRF sensor designed for formation control, and assessing its performances, in preparation to future formation flying missions such as Simbol X; FFIORD aims as well at validating various typical autonomous rendezvous and formation guidance and control algorithms. This paper presents the principles of the collision avoidance function developed by EADS ASTRIUM for FFIORD; three kinds of maneuvers were implemented and are presented in this paper with their performances.

Validation and Continued Development of Methods for Spheromak Simulation

NASA Astrophysics Data System (ADS)

Benedett, Thomas

2016-10-01

The HIT-SI experiment has demonstrated stable sustainment of spheromaks. Determining how the underlying physics extrapolate to larger, higher-temperature regimes is of prime importance in determining the viability of the inductively-driven spheromak. It is thus prudent to develop and validate a computational model that can be used to study current results and study the effect of possible design choices on plasma behavior. A zero-beta Hall-MHD model has shown good agreement with experimental data at 14.5 kHz injector operation. Experimental observations at higher frequency, where the best performance is achieved, indicate pressure effects are important and likely required to attain quantitative agreement with simulations. Efforts to extend the existing validation to high frequency (36-68 kHz) using an extended MHD model implemented in the PSI-TET arbitrary-geometry 3D MHD code will be presented. An implementation of anisotropic viscosity, a feature observed to improve agreement between NIMROD simulations and experiment, will also be presented, along with investigations of flux conserver features and their impact on density control for future SIHI experiments. Work supported by DoE.

The development and validation of three videos designed to psychologically prepare patients for coronary bypass surgery.

PubMed

Mahler, H I; Kulik, J A

1995-02-01

The purpose of this study was to demonstrate the validation of videotape interventions that were designed to prepare patients for coronary artery bypass graft (CABG) surgery. First, three videotapes were developed. Two of the tapes featured the experiences of three actual CABG patients and were constructed to present either an optimistic portrayal of the recovery period (mastery tape) or a portrayal designed to inoculate patients against potential problems (coping tape). The third videotape contained the more general nurse scenes and narration used in the other two tapes, but did not include the experiences of particular patients. We then conducted a study to establish the convergent and discriminant validity of the three tapes. That is, we sought to demonstrate both that the tapes did differ along the mastery-coping dimension, and that they did not differ in other respects (such as in the degree of information provided or the perceived credibility of the narrator). The validation study, conducted with 42 males who had previously undergone CABG, demonstrated that the intended equivalences and differences between the tapes were achieved. The importance of establishing the validity of health-related interventions is discussed.

Linguistic and content validation of a German-language PRO-CTCAE-based patient-reported outcomes instrument to evaluate the late effect symptom experience after allogeneic hematopoietic stem cell transplantation.

PubMed

Kirsch, Monika; Mitchell, Sandra A; Dobbels, Fabienne; Stussi, Georg; Basch, Ethan; Halter, Jorg P; De Geest, Sabina

2015-02-01

The aim of this sequential mixed methods study was to develop a PRO-CTCAE (Patient-Reported Outcomes version of the Common Terminology Criteria for Adverse Events)-based measure of the symptom experience of late effects in German speaking long-term survivors of allogeneic stem cell transplantation (SCT), and to examine its content validity. The US National Cancer Institute's PRO-CTAE item library was translated into German and linguistically validated. PRO-CTCAE symptoms prevalent in ≥50% of survivors (n = 15) and recognized in its importance by SCT experts (n = 9) were identified. Additional concepts relevant to the symptom experience and its consequences were elicited. Content validity of the PROVIVO (Patient-Reported Outcomes of long-term survivors after allogeneic SCT) instrument was assessed through an additional round of cognitive debriefing in 15 patients, and item and scale content validity indices by 9 experts. PROVIVO is comprised of a total of 49 items capturing the experience of physical, emotional and cognitive symptoms. To improve the instrument's utility for clinical decision-making, questions soliciting limitations in activities of daily living, frequent infections, and overall well-being were added. Cognitive debriefings demonstrated that items were well understood and relevant to the SCT survivor experience. Scale Content Validity Index (CVI) (0.94) and item CVI (median = 1; range 0.75-1) were very high. Qualitative and quantitative data provide preliminary evidence supporting the content validity of PROVIVO and identify a PRO-CTCAE item bundle for use in SCT survivors. A study to evaluate the measurement properties of PROVIVO and to examine its capacity to improve survivorship care planning is underway. Copyright © 2014 Elsevier Ltd. All rights reserved.

Maternity-care: measuring women's perceptions.

PubMed

Clark, Kim; Beatty, Shelley; Reibel, Tracy

2016-01-01

Achieving maternity-care outcomes that align with women's needs, preferences and expectations is important but theoretically driven measures of women's satisfaction with their entire maternity-care experience do not appear to exist. The purpose of this paper is to outline the development of an instrument to assess women's perception of their entire maternity-care experience. A questionnaire was developed on the basis of previous research and informed by a framework of standard service quality categories covering the spectrum of typical consumer concerns. A pilot survey with a sample of 195 women who had recent experience of birth was undertaken to establish valid and reliable scales pertaining to different stages of maternity care. Exploratory factor analysis was used to interpret scales and convergent validity was assessed using a modified version of the Client Satisfaction Questionnaire. Nine theoretically informed, reliable and valid stand-alone scales measuring the achievement of different dimensions of women's expectancies of public maternity care were developed. The study scales are intended for use in identifying some potential areas of focus for quality improvement in the delivery of maternity care. Reliable and valid tools for monitoring the extent to which services respond to women's expectations of their entire maternity care form part of the broader toolkit required to adequately manage health-care quality. This study offers guidance on the make-up of such tools. The scales produced from this research offer a means to assess maternity care across the full continuum of care and are brief and easy to use.

Results from SMAP Validation Experiments 2015 and 2016

NASA Astrophysics Data System (ADS)

Colliander, A.; Jackson, T. J.; Cosh, M. H.; Misra, S.; Crow, W.; Powers, J.; Wood, E. F.; Mohanty, B.; Judge, J.; Drewry, D.; McNairn, H.; Bullock, P.; Berg, A. A.; Magagi, R.; O'Neill, P. E.; Yueh, S. H.

2017-12-01

NASA's Soil Moisture Active Passive (SMAP) mission was launched in January 2015. The objective of the mission is global mapping of soil moisture and freeze/thaw state. Well-characterized sites with calibrated in situ soil moisture measurements are used to determine the quality of the soil moisture data products; these sites are designated as core validation sites (CVS). To support the CVS-based validation, airborne field experiments are used to provide high-fidelity validation data and to improve the SMAP retrieval algorithms. The SMAP project and NASA coordinated airborne field experiments at three CVS locations in 2015 and 2016. SMAP Validation Experiment 2015 (SMAPVEX15) was conducted around the Walnut Gulch CVS in Arizona in August, 2015. SMAPVEX16 was conducted at the South Fork CVS in Iowa and Carman CVS in Manitoba, Canada from May to August 2016. The airborne PALS (Passive Active L-band Sensor) instrument mapped all experiment areas several times resulting in 30 coincidental measurements with SMAP. The experiments included intensive ground sampling regime consisting of manual sampling and augmentation of the CVS soil moisture measurements with temporary networks of soil moisture sensors. Analyses using the data from these experiments have produced various results regarding the SMAP validation and related science questions. The SMAPVEX15 data set has been used for calibration of a hyper-resolution model for soil moisture product validation; development of a multi-scale parameterization approach for surface roughness, and validation of disaggregation of SMAP soil moisture with optical thermal signal. The SMAPVEX16 data set has been already used for studying the spatial upscaling within a pixel with highly heterogeneous soil texture distribution; for understanding the process of radiative transfer at plot scale in relation to field scale and SMAP footprint scale over highly heterogeneous vegetation distribution; for testing a data fusion based soil moisture downscaling approach; and for investigating soil moisture impact on estimation of vegetation fluorescence from airborne measurements. The presentation will describe the collected data and showcase some of the most important results achieved so far.

Use of integral experiments in support to the validation of JEFF-3.2 nuclear data evaluation

NASA Astrophysics Data System (ADS)

Leclaire, Nicolas; Cochet, Bertrand; Jinaphanh, Alexis; Haeck, Wim

2017-09-01

For many years now, IRSN has developed its own Monte Carlo continuous energy capability, which allows testing various nuclear data libraries. In that prospect, a validation database of 1136 experiments was built from cases used for the validation of the APOLLO2-MORET 5 multigroup route of the CRISTAL V2.0 package. In this paper, the keff obtained for more than 200 benchmarks using the JEFF-3.1.1 and JEFF-3.2 libraries are compared to benchmark keff values and main discrepancies are analyzed regarding the neutron spectrum. Special attention is paid on benchmarks for which the results have been highly modified between both JEFF-3 versions.

The space shuttle payload planning working groups. Volume 8: Earth and ocean physics

NASA Technical Reports Server (NTRS)

1973-01-01

The findings and recommendations of the Earth and Ocean Physics working group of the space shuttle payload planning activity are presented. The requirements for the space shuttle mission are defined as: (1) precision measurement for earth and ocean physics experiments, (2) development and demonstration of new and improved sensors and analytical techniques, (3) acquisition of surface truth data for evaluation of new measurement techniques, (4) conduct of critical experiments to validate geophysical phenomena and instrumental results, and (5) development and validation of analytical/experimental models for global ocean dynamics and solid earth dynamics/earthquake prediction. Tables of data are presented to show the flight schedule estimated costs, and the mission model.

Probing eukaryotic cell mechanics via mesoscopic simulations

NASA Astrophysics Data System (ADS)

Pivkin, Igor V.; Lykov, Kirill; Nematbakhsh, Yasaman; Shang, Menglin; Lim, Chwee Teck

2017-11-01

We developed a new mesoscopic particle based eukaryotic cell model which takes into account cell membrane, cytoskeleton and nucleus. The breast epithelial cells were used in our studies. To estimate the viscoelastic properties of cells and to calibrate the computational model, we performed micropipette aspiration experiments. The model was then validated using data from microfluidic experiments. Using the validated model, we probed contributions of sub-cellular components to whole cell mechanics in micropipette aspiration and microfluidics experiments. We believe that the new model will allow to study in silico numerous problems in the context of cell biomechanics in flows in complex domains, such as capillary networks and microfluidic devices.

The Synthetic Experiment: E. B. Titchener's Cornell Psychological Laboratory and the Test of Introspective Analysis.

PubMed

Evans, Rand B

2017-01-01

Beginning in 1 9a0, a major thread of research was added to E. B. Titchener's Cornell laboratory: the synthetic experiment. Titchener and his graduate students used introspective analysis to reduce a perception, a complex experience, into its simple sensory constituents. To test the validity of that analysis, stimulus patterns were selected to reprodiuce the patterns of sensations found in the introspective analyses. If the original perception can be reconstructed in this way, then the analysis was considered validated. This article reviews development of the synthetic method in E. B. Titchener's laboratory at Cornell University and examines its impact on psychological research.

Particle Engulfment and Pushing By Solidifying Interfaces - Recent Theoretical and Experimental Developments

NASA Technical Reports Server (NTRS)

Stefanescu, D. M.; Catalina, A. V.; Juretzko, Frank R.; Sen, Subhayu; Curreri, P. A.

2003-01-01

The objective of the work on Particle Engulfment and Pushing by Solidifying Interfaces (PEP) include: 1) to obtain fundamental understanding of the physics of particle pushing and engulfment, 2) to develop mathematical models to describe the phenomenon, and 3) to perform critical experiments in the microgravity environment of space to provide benchmark data for model validation. Successful completion of this project will yield vital information relevant to a diverse area of terrestrial applications. With PEP being a long term research effort, this report will focus on advances in the theoretical treatment of the solid/liquid interface interaction with an approaching particle, experimental validation of some aspects of the developed models, and the experimental design aspects of future experiments to be performed on board the International Space Station.

Seeking health information on the web: positive hypothesis testing.

PubMed

Kayhan, Varol Onur

2013-04-01

The goal of this study is to investigate positive hypothesis testing among consumers of health information when they search the Web. After demonstrating the extent of positive hypothesis testing using Experiment 1, we conduct Experiment 2 to test the effectiveness of two debiasing techniques. A total of 60 undergraduate students searched a tightly controlled online database developed by the authors to test the validity of a hypothesis. The database had four abstracts that confirmed the hypothesis and three abstracts that disconfirmed it. Findings of Experiment 1 showed that majority of participants (85%) exhibited positive hypothesis testing. In Experiment 2, we found that the recommendation technique was not effective in reducing positive hypothesis testing since none of the participants assigned to this server could retrieve disconfirming evidence. Experiment 2 also showed that the incorporation technique successfully reduced positive hypothesis testing since 75% of the participants could retrieve disconfirming evidence. Positive hypothesis testing on the Web is an understudied topic. More studies are needed to validate the effectiveness of the debiasing techniques discussed in this study and develop new techniques. Search engine developers should consider developing new options for users so that both confirming and disconfirming evidence can be presented in search results as users test hypotheses using search engines. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Measuring Black Men’s Police-Based Discrimination Experiences: Development and Validation of the Police and Law Enforcement (PLE) Scale

PubMed Central

English, Devin; Bowleg, Lisa; del Río-González, Ana Maria; Tschann, Jeanne M.; Agans, Robert; Malebranche, David J

2017-01-01

Objectives Although social science research has examined police and law enforcement-perpetrated discrimination against Black men using policing statistics and implicit bias studies, there is little quantitative evidence detailing this phenomenon from the perspective of Black men. Consequently, there is a dearth of research detailing how Black men’s perspectives on police and law enforcement-related stress predict negative physiological and psychological health outcomes. This study addresses these gaps with the qualitative development and quantitative test of the Police and Law Enforcement (PLE) scale. Methods In Study 1, we employed thematic analysis on transcripts of individual qualitative interviews with 90 Black men to assess key themes and concepts and develop quantitative items. In Study 2, we used 2 focus groups comprised of 5 Black men each (n=10), intensive cognitive interviewing with a separate sample of Black men (n=15), and piloting with another sample of Black men (n=13) to assess the ecological validity of the quantitative items. For study 3, we analyzed data from a sample of 633 Black men between the ages of 18 and 65 to test the factor structure of the PLE, as we all as its concurrent validity and convergent/discriminant validity. Results Qualitative analyses and confirmatory factor analyses suggested that a 5-item, 1-factor measure appropriately represented respondents’ experiences of police/law enforcement discrimination. As hypothesized, the PLE was positively associated with measures of racial discrimination and depressive symptoms. Conclusions Preliminary evidence suggests that the PLE is a reliable and valid measure of Black men’s experiences of discrimination with police/law enforcement. PMID:28080104

Measuring Black men's police-based discrimination experiences: Development and validation of the Police and Law Enforcement (PLE) Scale.

PubMed

English, Devin; Bowleg, Lisa; Del Río-González, Ana Maria; Tschann, Jeanne M; Agans, Robert P; Malebranche, David J

2017-04-01

Although social science research has examined police and law enforcement-perpetrated discrimination against Black men using policing statistics and implicit bias studies, there is little quantitative evidence detailing this phenomenon from the perspective of Black men. Consequently, there is a dearth of research detailing how Black men's perspectives on police and law enforcement-related stress predict negative physiological and psychological health outcomes. This study addresses these gaps with the qualitative development and quantitative test of the Police and Law Enforcement (PLE) Scale. In Study 1, we used thematic analysis on transcripts of individual qualitative interviews with 90 Black men to assess key themes and concepts and develop quantitative items. In Study 2, we used 2 focus groups comprised of 5 Black men each (n = 10), intensive cognitive interviewing with a separate sample of Black men (n = 15), and piloting with another sample of Black men (n = 13) to assess the ecological validity of the quantitative items. For Study 3, we analyzed data from a sample of 633 Black men between the ages of 18 and 65 to test the factor structure of the PLE, as we all as its concurrent validity and convergent/discriminant validity. Qualitative analyses and confirmatory factor analyses suggested that a 5-item, 1-factor measure appropriately represented respondents' experiences of police/law enforcement discrimination. As hypothesized, the PLE was positively associated with measures of racial discrimination and depressive symptoms. Preliminary evidence suggests that the PLE is a reliable and valid measure of Black men's experiences of discrimination with police/law enforcement. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Development, Validation, and Application of OSSEs at NASA/GMAO

NASA Technical Reports Server (NTRS)

Errico, Ronald; Prive, Nikki

2015-01-01

During the past several years, NASA Goddard's Global Modeling and Assimilation Office (GMAO) has been developing a framework for conducting Observing System Simulation Experiments (OSSEs). The motivation and design of that framework will be described and a sample of validation results presented. Fundamentals issues will be highlighted, particularly the critical importance of appropriately simulating system errors. Some problems that have just arisen in the newest experimental system will also be mentioned.

The family experiences of in-hospital care questionnaire in severe traumatic brain injury (FECQ-TBI): a validation study.

PubMed

Anke, Audny; Manskow, Unn Sollid; Friborg, Oddgeir; Røe, Cecilie; Arntzen, Cathrine

2016-11-28

Family members are important for support and care of their close relative after severe traumas, and their experiences are vital health care quality indicators. The objective was to describe the development of the Family Experiences of in-hospital Care Questionnaire for family members of patients with severe Traumatic Brain Injury (FECQ-TBI), and to evaluate its psychometric properties and validity. The design of the study is a Norwegian multicentre study inviting 171 family members. The questionnaire developmental process included a literature review, use of an existing instrument (the parent experience of paediatric care questionnaire), focus group with close family members, as well as expert group judgments. Items asking for family care experiences related to acute wards and rehabilitation were included. Several items of the paediatric care questionnaire were removed or the wording of the items was changed to comply with the present purpose. Questions covering experiences with the inpatient rehabilitation period, the discharge phase, the family experiences with hospital facilities, the transfer between departments and the economic needs of the family were added. The developed questionnaire was mailed to the participants. Exploratory factor analyses were used to examine scale structure, in addition to screening for data quality, and analyses of internal consistency and validity. The questionnaire was returned by 122 (71%) of family members. Principal component analysis extracted six dimensions (eigenvalues > 1.0): acute organization and information (10 items), rehabilitation organization (13 items), rehabilitation information (6 items), discharge (4 items), hospital facilities-patients (4 items) and hospital facilities-family (2 items). Items related to the acute phase were comparable to items in the two dimensions of rehabilitation: organization and information. All six subscales had high Cronbach's alpha coefficients >0.80. The construct validity was confirmed. The FECQ-TBI assesses important aspects of in-hospital care in the acute and rehabilitation phases, as seen from a family perspective. The psychometric properties and the construct validity of the questionnaire were good, hence supporting the use of the FECQ-TBI to assess quality of care in rehabilitation departments.

Development, Validation and Integration of the ATLAS Trigger System Software in Run 2

NASA Astrophysics Data System (ADS)

Keyes, Robert; ATLAS Collaboration

2017-10-01

The trigger system of the ATLAS detector at the LHC is a combination of hardware, firmware, and software, associated to various sub-detectors that must seamlessly cooperate in order to select one collision of interest out of every 40,000 delivered by the LHC every millisecond. These proceedings discuss the challenges, organization and work flow of the ongoing trigger software development, validation, and deployment. The goal of this development is to ensure that the most up-to-date algorithms are used to optimize the performance of the experiment. The goal of the validation is to ensure the reliability and predictability of the software performance. Integration tests are carried out to ensure that the software deployed to the online trigger farm during data-taking run as desired. Trigger software is validated by emulating online conditions using a benchmark run and mimicking the reconstruction that occurs during normal data-taking. This exercise is computationally demanding and thus runs on the ATLAS high performance computing grid with high priority. Performance metrics ranging from low-level memory and CPU requirements, to distributions and efficiencies of high-level physics quantities are visualized and validated by a range of experts. This is a multifaceted critical task that ties together many aspects of the experimental effort and thus directly influences the overall performance of the ATLAS experiment.

Recognition, Accreditation and Validation of Non-Formal and Informal Learning: Prospects for Lifelong Learning in Nepal

ERIC Educational Resources Information Center

Regmi, Kapil Dev

2009-01-01

This study was an exploration on the various issues related to recognition, accreditation and validation of non-formal and informal learning to open up avenues for lifelong learning and continuing education in Nepal. The perceptions, experiences, and opinions of Nepalese Development Activists, Educational Administrators, Policy Actors and…

The Development and Validation of the Student Response System Benefit Scale

ERIC Educational Resources Information Center

Hooker, J. F.; Denker, K. J.; Summers, M. E.; Parker, M.

2016-01-01

Previous research into the benefits student response systems (SRS) that have been brought into the classroom revealed that SRS can contribute positively to student experiences. However, while the benefits of SRS have been conceptualized and operationalized into a widely cited scale, the validity of this scale had not been tested. Furthermore,…

Hypersonic Experimental and Computational Capability, Improvement and Validation. Volume 2

NASA Technical Reports Server (NTRS)

Muylaert, Jean (Editor); Kumar, Ajay (Editor); Dujarric, Christian (Editor)

1998-01-01

The results of the phase 2 effort conducted under AGARD Working Group 18 on Hypersonic Experimental and Computational Capability, Improvement and Validation are presented in this report. The first volume, published in May 1996, mainly focused on the design methodology, plans and some initial results of experiments that had been conducted to serve as validation benchmarks. The current volume presents the detailed experimental and computational data base developed during this effort.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Atamturktur, Sez; Unal, Cetin; Hemez, Francois

The project proposed to provide a Predictive Maturity Framework with its companion metrics that (1) introduce a formalized, quantitative means to communicate information between interested parties, (2) provide scientifically dependable means to claim completion of Validation and Uncertainty Quantification (VU) activities, and (3) guide the decision makers in the allocation of Nuclear Energy’s resources for code development and physical experiments. The project team proposed to develop this framework based on two complimentary criteria: (1) the extent of experimental evidence available for the calibration of simulation models and (2) the sophistication of the physics incorporated in simulation models. The proposed frameworkmore » is capable of quantifying the interaction between the required number of physical experiments and degree of physics sophistication. The project team has developed this framework and implemented it with a multi-scale model for simulating creep of a core reactor cladding. The multi-scale model is composed of the viscoplastic self-consistent (VPSC) code at the meso-scale, which represents the visco-plastic behavior and changing properties of a highly anisotropic material and a Finite Element (FE) code at the macro-scale to represent the elastic behavior and apply the loading. The framework developed takes advantage of the transparency provided by partitioned analysis, where independent constituent codes are coupled in an iterative manner. This transparency allows model developers to better understand and remedy the source of biases and uncertainties, whether they stem from the constituents or the coupling interface by exploiting separate-effect experiments conducted within the constituent domain and integral-effect experiments conducted within the full-system domain. The project team has implemented this procedure with the multi- scale VPSC-FE model and demonstrated its ability to improve the predictive capability of the model. Within this framework, the project team has focused on optimizing resource allocation for improving numerical models through further code development and experimentation. Related to further code development, we have developed a code prioritization index (CPI) for coupled numerical models. CPI is implemented to effectively improve the predictive capability of the coupled model by increasing the sophistication of constituent codes. In relation to designing new experiments, we investigated the information gained by the addition of each new experiment used for calibration and bias correction of a simulation model. Additionally, the variability of ‘information gain’ through the design domain has been investigated in order to identify the experiment settings where maximum information gain occurs and thus guide the experimenters in the selection of the experiment settings. This idea was extended to evaluate the information gain from each experiment can be improved by intelligently selecting the experiments, leading to the development of the Batch Sequential Design (BSD) technique. Additionally, we evaluated the importance of sufficiently exploring the domain of applicability in experiment-based validation of high-consequence modeling and simulation by developing a new metric to quantify coverage. This metric has also been incorporated into the design of new experiments. Finally, we have proposed a data-aware calibration approach for the calibration of numerical models. This new method considers the complexity of a numerical model (the number of parameters to be calibrated, parameter uncertainty, and form of the model) and seeks to identify the number of experiments necessary to calibrate the model based on the level of sophistication of the physics. The final component in the project team’s work to improve model calibration and validation methods is the incorporation of robustness to non-probabilistic uncertainty in the input parameters. This is an improvement to model validation and uncertainty quantification stemming beyond the originally proposed scope of the project. We have introduced a new metric for incorporating the concept of robustness into experiment-based validation of numerical models. This project has accounted for the graduation of two Ph.D. students (Kendra Van Buren and Josh Hegenderfer) and two M.S. students (Matthew Egeberg and Parker Shields). One of the doctoral students is now working in the nuclear engineering field and the other one is a post-doctoral fellow at the Los Alamos National Laboratory. Additionally, two more Ph.D. students (Garrison Stevens and Tunc Kulaksiz) who are working towards graduation have been supported by this project.« less

Development and quality analysis of the Work Experience Measurement Scale (WEMS).

PubMed

Nilsson, Petra; Bringsén, Asa; Andersson, H Ingemar; Ejlertsson, Göran

2010-01-01

Instruments related to work are commonly illuminated from an ill-health perspective. The need for a concise and useable instrument in workplace health promotion governed the aim of this paper which is to present the development process and quality assessment of the Work Experience Measurement Scale (WEMS). A survey, using a questionnaire based on established theories regarding work and health, and a focus group study were performed in hospital settings in 2005 and 2006 respectively. A Principal Component Analysis (PCA) was used to statistically develop a model, and focus group interviews were made to compare quantitative and qualitative results for convergence and corroboration. The PCA resulted in a six factor model of dimensions containing items regarding management, reorganization, internal work experience, pressure of time, autonomy and supportive working conditions. In the analysis of the focus group study three themes appeared and their underlying content was compared to, and matched, with the dimensions of the PCA. The reliability, shown by weighted kappa values, ranged from 0.36 to 0.71, and adequate Cronbach's Alpha values of the dimensions were all above 0.7. The study validity, indicated by discriminant validity, with correlation values that ranged from 0.10 to 0.39, in relation to the content validity appeared to be good when the theoretical content of the WEMS was compared to the content of similar instruments. The WEMS presents a multidimensional picture of work experience. Its theoretical base and the psychometric properties give support for applicability and offer a possibility to measure trends in the work experience over time in health care settings. One intention of the WEMS is to stimulate the ability of organizations and the employees themselves to take action on improving their work experience. The conciseness of the instrument is intended to increase its usability.

Development and validation of the Alcohol Myopia Scale.

PubMed

Lac, Andrew; Berger, Dale E

2013-09-01

Alcohol myopia theory conceptualizes the ability of alcohol to narrow attention and how this demand on mental resources produces the impairments of self-inflation, relief, and excess. The current research was designed to develop and validate a scale based on this framework. People who were alcohol users rated items representing myopic experiences arising from drinking episodes in the past month. In Study 1 (N = 260), the preliminary 3-factor structure was supported by exploratory factor analysis. In Study 2 (N = 289), the 3-factor structure was substantiated with confirmatory factor analysis, and it was superior in fit to an empirically indefensible 1-factor structure. The final 14-item scale was evaluated with internal consistency reliability, discriminant validity, convergent validity, criterion validity, and incremental validity. The alcohol myopia scale (AMS) illuminates conceptual underpinnings of this theory and yields insights for understanding the tunnel vision that arises from intoxication.

Predeployment validation of fault-tolerant systems through software-implemented fault insertion

NASA Technical Reports Server (NTRS)

Czeck, Edward W.; Siewiorek, Daniel P.; Segall, Zary Z.

1989-01-01

Fault injection-based automated testing (FIAT) environment, which can be used to experimentally characterize and evaluate distributed realtime systems under fault-free and faulted conditions is described. A survey is presented of validation methodologies. The need for fault insertion based on validation methodologies is demonstrated. The origins and models of faults, and motivation for the FIAT concept are reviewed. FIAT employs a validation methodology which builds confidence in the system through first providing a baseline of fault-free performance data and then characterizing the behavior of the system with faults present. Fault insertion is accomplished through software and allows faults or the manifestation of faults to be inserted by either seeding faults into memory or triggering error detection mechanisms. FIAT is capable of emulating a variety of fault-tolerant strategies and architectures, can monitor system activity, and can automatically orchestrate experiments involving insertion of faults. There is a common system interface which allows ease of use to decrease experiment development and run time. Fault models chosen for experiments on FIAT have generated system responses which parallel those observed in real systems under faulty conditions. These capabilities are shown by two example experiments each using a different fault-tolerance strategy.

Convergent Validity of the Early Memory Index in Two Primary Care Samples.

PubMed

Porcerelli, John H; Cogan, Rosemary; Melchior, Katherine A; Jasinski, Matthew J; Richardson, Laura; Fowler, Shannon; Morris, Pierre; Murdoch, William

2016-01-01

Karliner, Westrich, Shedler, and Mayman (1996) developed the Early Memory Index (EMI) to assess mental health, narrative coherence, and traumatic experiences in reports of early memories. We assessed the convergent validity of EMI scales with data from 103 women from an urban primary care clinic (Study 1) and data from 48 women and 24 men from a suburban primary care clinic (Study 2). Patients provided early memory narratives and completed self-report measures of psychopathology, trauma, and health care utilization. In both studies, lower scores on the Mental Health scale and higher scores on the Traumatic Experiences scale were related to higher scores on measures of psychopathology and childhood trauma. Less consistent associations were found between the Mental Health and Traumatic Experiences scores and measures of health care utilization. The Narrative Coherence scale showed inconsistent relationships across measures in both samples. In analyses assessing the overall fit between hypothesized and actual correlations between EMI scores and measures of psychopathology, severity of trauma symptoms, and health care utilization, the Mental Health scale of the EMI demonstrated stronger convergent validity than the EMI Traumatic Experiences scale. The results provide support for the convergent validity of the Mental Health scale of the EMI.

Disruption Tolerant Networking Flight Validation Experiment on NASA's EPOXI Mission

NASA Technical Reports Server (NTRS)

Wyatt, Jay; Burleigh, Scott; Jones, Ross; Torgerson, Leigh; Wissler, Steve

2009-01-01

In October and November of 2008, the Jet Propulsion Laboratory installed and tested essential elements of Delay/Disruption Tolerant Networking (DTN) technology on the Deep Impact spacecraft. This experiment, called Deep Impact Network Experiment (DINET), was performed in close cooperation with the EPOXI project which has responsibility for the spacecraft. During DINET some 300 images were transmitted from the JPL nodes to the spacecraft. Then they were automatically forwarded from the spacecraft back to the JPL nodes, exercising DTN's bundle origination, transmission, acquisition, dynamic route computation, congestion control, prioritization, custody transfer, and automatic retransmission procedures, both on the spacecraft and on the ground, over a period of 27 days. All transmitted bundles were successfully received, without corruption. The DINET experiment demonstrated DTN readiness for operational use in space missions. This activity was part of a larger NASA space DTN development program to mature DTN to flight readiness for a wide variety of mission types by the end of 2011. This paper describes the DTN protocols, the flight demo implementation, validation metrics which were created for the experiment, and validation results.

The Autism Family Experience Questionnaire (AFEQ): An Ecologically-Valid, Parent-Nominated Measure of Family Experience, Quality of Life and Prioritised Outcomes for Early Intervention

ERIC Educational Resources Information Center

Leadbitter, Kathy; Aldred, Catherine; McConachie, Helen; Le Couteur, Ann; Kapadia, Dharmi; Charman, Tony; Macdonald, Wendy; Salomone, Erica; Emsley, Richard; Green, Jonathan; Barrett, Barbara; Barron, Sam; Beggs, Karen; Blazey, Laura; Bourne, Katy; Byford, Sarah; Cole-Fletcher, Rachel; Collino, Julia; Colmer, Ruth; Cutress, Anna; Gammer, Isobel; Harrop, Clare; Houghton, Tori; Howlin, Pat; Hudry, Kristelle; Leach, Sue; Maxwell, Jessica; Parr, Jeremy; Pickles, Andrew; Randles, Sarah; Slonims, Vicky; Taylor, Carol; Temple, Kathryn; Tobin, Hannah; Vamvakas, George; White, Lydia

2018-01-01

There is a lack of measures that reflect the intervention priorities of parents of children with autism spectrum disorder (ASD) and that assess the impact of interventions on family experience and quality of life. The Autism Family Experience Questionnaire (AFEQ) was developed through focus groups and online consultation with parents, and…

Electrically Driven Thermal Management: Flight Validation, Experiment Development, Future Technologies

NASA Technical Reports Server (NTRS)

Didion, Jeffrey R.

2018-01-01

Electrically Driven Thermal Management is an active research and technology development initiative incorporating ISS technology flight demonstrations (STP-H5), development of Microgravity Science Glovebox (MSG) flight experiment, and laboratory-based investigations of electrically based thermal management techniques. The program targets integrated thermal management for future generations of RF electronics and power electronic devices. This presentation reviews four program elements: i.) results from the Electrohydrodynamic (EHD) Long Term Flight Demonstration launched in February 2017 ii.) development of the Electrically Driven Liquid Film Boiling Experiment iii.) two University based research efforts iv.) development of Oscillating Heat Pipe evaluation at Goddard Space Flight Center.

A Validation Framework for the Long Term Preservation of High Energy Physics Data

NASA Astrophysics Data System (ADS)

Ozerov, Dmitri; South, David M.

2014-06-01

The study group on data preservation in high energy physics, DPHEP, is moving to a new collaboration structure, which will focus on the implementation of preservation projects, such as those described in the group's large scale report published in 2012. One such project is the development of a validation framework, which checks the compatibility of evolving computing environments and technologies with the experiments software for as long as possible, with the aim of substantially extending the lifetime of the analysis software, and hence of the usability of the data. The framework is designed to automatically test and validate the software and data of an experiment against changes and upgrades to the computing environment, as well as changes to the experiment software itself. Technically, this is realised using a framework capable of hosting a number of virtual machine images, built with different configurations of operating systems and the relevant software, including any necessary external dependencies.

Intoxication-Related AmED (Alcohol Mixed with Energy Drink) Expectancies Scale: Initial Development and Validation

PubMed Central

Miller, Kathleen E.; Dermen, Kurt H.; Lucke, Joseph F.

2017-01-01

BACKGROUND Young adult use of alcohol mixed with energy drinks (AmEDs) has been linked with elevated risks for a constellation of problem behaviors. These risks may be conditioned by expectancies regarding the effects of caffeine in conjunction with alcohol consumption. The aim of this study was to describe the construction and psychometric evaluation of the Intoxication-Related AmED Expectancies Scale (AmED_EXPI), 15 self-report items measuring beliefs about how the experience of AmED intoxication differs from the experience of noncaffeinated alcohol (NCA) intoxication. METHODS Scale development and testing were conducted using data from a U.S. national sample of 3,105 adolescents and emerging adults aged 13–25. Exploratory and confirmatory factor analyses were conducted to evaluate the factor structure and establish factor invariance across gender, age, and prior experience with AmED use. Cross-sectional and longitudinal analyses examining correlates of AmED use were used to assess construct and predictive validity. RESULTS In confirmatory factor analyses, fit indices for the hypothesized four-factor structure (i.e., Intoxication Management [IM], Alertness [AL], Sociability [SO], and Jitters [JT]) revealed a moderately good fit to the data. Together, these factors accounted for 75.3% of total variance. The factor structure was stable across male/female, teen/young adult, and AmED experience/no experience subgroups. The resultant unit-weighted subscales showed strong internal consistency and satisfactory convergent validity. Baseline scores on the IM, SO, and JT subscales predicted changes in AmED use over a subsequent three-month period. CONCLUSIONS The AmED_EXPI appears to be a reliable and valid tool for measuring expectancies about the effects of caffeine during alcohol intoxication. PMID:28421613

Intoxication-Related Alcohol Mixed with Energy Drink Expectancies Scale: Initial Development and Validation.

PubMed

Miller, Kathleen E; Dermen, Kurt H; Lucke, Joseph F

2017-06-01

Young adult use of alcohol mixed with energy drinks (AmEDs) has been linked with elevated risks of a constellation of problem behaviors. These risks may be conditioned by expectancies regarding the effects of caffeine in conjunction with alcohol consumption. The aim of this study was to describe the construction and psychometric evaluation of the Intoxication-Related AmED Expectancies Scale (AmED_EXPI), 15 self-report items measuring beliefs about how the experience of AmED intoxication differs from the experience of noncaffeinated alcohol (NCA) intoxication. Scale development and testing were conducted using data from a U.S. national sample of 3,105 adolescents and emerging adults aged 13 to 25. Exploratory and confirmatory factor analyses were conducted to evaluate the factor structure and establish factor invariance across gender, age, and prior experience with AmED use. Cross-sectional and longitudinal analyses examining correlates of AmED use were used to assess construct and predictive validity. In confirmatory factor analyses, fit indices for the hypothesized 4-factor structure (i.e., Intoxication Management [IM], Alertness [AL], Sociability [SO], and Jitters [JT]) revealed a moderately good fit to the data. Together, these factors accounted for 75.3% of total variance. The factor structure was stable across male/female, teen/young adult, and AmED experience/no experience subgroups. The resultant unit-weighted subscales showed strong internal consistency and satisfactory convergent validity. Baseline scores on the IM, SO, and JT subscales predicted changes in AmED use over a subsequent 3-month period. The AmED_EXPI appears to be a reliable and valid tool for measuring expectancies about the effects of caffeine during alcohol intoxication. Copyright © 2017 by the Research Society on Alcoholism.

Robotic suturing on the FLS model possesses construct validity, is less physically demanding, and is favored by more surgeons compared with laparoscopy.

PubMed

Stefanidis, Dimitrios; Hope, William W; Scott, Daniel J

2011-07-01

The value of robotic assistance for intracorporeal suturing is not well defined. We compared robotic suturing with laparoscopic suturing on the FLS model with a large cohort of surgeons. Attendees (n=117) at the SAGES 2006 Learning Center robotic station placed intracorporeal sutures on the FLS box-trainer model using conventional laparoscopic instruments and the da Vinci® robot. Participant performance was recorded using a validated objective scoring system, and a questionnaire regarding demographics, task workload, and suturing modality preference was completed. Construct validity for both tasks was assessed by comparing the performance scores of subjects with various levels of experience. A validated questionnaire was used for workload measurement. Of the participants, 84% had prior laparoscopic and 10% prior robotic suturing experience. Within the allotted time, 83% of participants completed the suturing task laparoscopically and 72% with the robot. Construct validity was demonstrated for both simulated tasks according to the participants' advanced laparoscopic experience, laparoscopic suturing experience, and self-reported laparoscopic suturing ability (p<0.001 for all) and according to prior robotic experience, robotic suturing experience, and self-reported robotic suturing ability (p<0.001 for all), respectively. While participants achieved higher suturing scores with standard laparoscopy compared with the robot (84±75 vs. 56±63, respectively; p<0.001), they found the laparoscopic task more physically demanding (NASA score 13±5 vs. 10±5, respectively; p<0.001) and favored the robot as their method of choice for intracorporeal suturing (62 vs. 38%, respectively; p<0.01). Construct validity was demonstrated for robotic suturing on the FLS model. Suturing scores were higher using standard laparoscopy likely as a result of the participants' greater experience with laparoscopic suturing versus robotic suturing. Robotic assistance decreases the physical demand of intracorporeal suturing compared with conventional laparoscopy and, in this study, was the preferred suturing method by most surgeons. Curricula for robotic suturing training need to be developed.

EVAL mission requirements, phase 1

NASA Technical Reports Server (NTRS)

1976-01-01

The aspects of NASA's applications mission were enhanced by utilization of shuttle/spacelab, and payload groupings which optimize the cost of achieving the mission goals were defined. Preliminary Earth Viewing Application Laboratory (EVAL) missions, experiments, sensors, and sensor groupings were developed. The major technological EVAL themes and objectives which NASA will be addressing during the 1980 to 2,000 time period were investigated. Missions/experiments which addressed technique development, sensor development, application development, and/or operational data collection were considered as valid roles for EVAL flights.

EOS Terra Validation Program

NASA Technical Reports Server (NTRS)

Starr, David

2000-01-01

The EOS Terra mission will be launched in July 1999. This mission has great relevance to the atmospheric radiation community and global change issues. Terra instruments include Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER), Clouds and Earth's Radiant Energy System (CERES), Multi-Angle Imaging Spectroradiometer (MISR), Moderate Resolution Imaging Spectroradiometer (MODIS) and Measurements of Pollution in the Troposphere (MOPITT). In addition to the fundamental radiance data sets, numerous global science data products will be generated, including various Earth radiation budget, cloud and aerosol parameters, as well as land surface, terrestrial ecology, ocean color, and atmospheric chemistry parameters. Significant investments have been made in on-board calibration to ensure the quality of the radiance observations. A key component of the Terra mission is the validation of the science data products. This is essential for a mission focused on global change issues and the underlying processes. The Terra algorithms have been subject to extensive pre-launch testing with field data whenever possible. Intensive efforts will be made to validate the Terra data products after launch. These include validation of instrument calibration (vicarious calibration) experiments, instrument and cross-platform comparisons, routine collection of high quality correlative data from ground-based networks, such as AERONET, and intensive sites, such as the SGP ARM site, as well as a variety field experiments, cruises, etc. Airborne simulator instruments have been developed for the field experiment and underflight activities including the MODIS Airborne Simulator (MAS) AirMISR, MASTER (MODIS-ASTER), and MOPITT-A. All are integrated on the NASA ER-2 though low altitude platforms are more typically used for MASTER. MATR is an additional sensor used for MOPITT algorithm development and validation. The intensive validation activities planned for the first year of the Terra mission will be described with emphasis on derived geophysical parameters of most relevance to the atmospheric radiation community.

Initial Validation of Robotic Operations for In-Space Assembly of a Large Solar Electric Propulsion Transport Vehicle

NASA Technical Reports Server (NTRS)

Komendera, Erik E.; Dorsey, John T.

2017-01-01

Developing a capability for the assembly of large space structures has the potential to increase the capabilities and performance of future space missions and spacecraft while reducing their cost. One such application is a megawatt-class solar electric propulsion (SEP) tug, representing a critical transportation ability for the NASA lunar, Mars, and solar system exploration missions. A series of robotic assembly experiments were recently completed at Langley Research Center (LaRC) that demonstrate most of the assembly steps for the SEP tug concept. The assembly experiments used a core set of robotic capabilities: long-reach manipulation and dexterous manipulation. This paper describes cross-cutting capabilities and technologies for in-space assembly (ISA), applies the ISA approach to a SEP tug, describes the design and development of two assembly demonstration concepts, and summarizes results of two sets of assembly experiments that validate the SEP tug assembly steps.

CFD Modeling of Free-Piston Stirling Engines

NASA Technical Reports Server (NTRS)

Ibrahim, Mounir B.; Zhang, Zhi-Guo; Tew, Roy C., Jr.; Gedeon, David; Simon, Terrence W.

2001-01-01

NASA Glenn Research Center (GRC) is funding Cleveland State University (CSU) to develop a reliable Computational Fluid Dynamics (CFD) code that can predict engine performance with the goal of significant improvements in accuracy when compared to one-dimensional (1-D) design code predictions. The funding also includes conducting code validation experiments at both the University of Minnesota (UMN) and CSU. In this paper a brief description of the work-in-progress is provided in the two areas (CFD and Experiments). Also, previous test results are compared with computational data obtained using (1) a 2-D CFD code obtained from Dr. Georg Scheuerer and further developed at CSU and (2) a multidimensional commercial code CFD-ACE+. The test data and computational results are for (1) a gas spring and (2) a single piston/cylinder with attached annular heat exchanger. The comparisons among the codes are discussed. The paper also discusses plans for conducting code validation experiments at CSU and UMN.

The Development and Validation of the Social Networking Experiences Questionnaire: A Measure of Adolescent Cyberbullying and Its Impact.

PubMed

Dredge, Rebecca; Gleeson, John; Garcia, Xochitl de la Piedad

2015-01-01

The measurement of cyberbullying has been marked by several inconsistencies that lead to difficulties in cross-study comparisons of the frequency of occurrence and the impact of cyberbullying. Consequently, the first aim of this study was to develop a measure of experience with and impact of cyberbullying victimization in social networking sites in adolescents. The second aim was to investigate the psychometric properties of a purpose-built measure (Social Networking Experiences Questionnaire [SNEQ]). Exploratory factor analysis on 253 adolescent social networking sites users produced a six-factor model of impact. However, one factor was removed because of low internal consistency. Cronbach's alpha was higher than .76 for the victimization and remaining five impact subscales. Furthermore, correlation coefficients for the Victimization scale and related dimensions showed good construct validity. The utility of the SNEQ for victim support personnel, research, and cyberbullying education/prevention programs is discussed.

Validation of the Small Hot Jet Acoustic Rig for Jet Noise Research

NASA Technical Reports Server (NTRS)

Bridges, James; Brown, Clifford A.

2005-01-01

The development and acoustic validation of the Small Hot Jet Aeroacoustic Rig (SHJAR) is documented. Originally conceived to support fundamental research in jet noise, the rig has been designed and developed using the best practices of the industry. While validating the rig for acoustic work, a method of characterizing all extraneous rig noise was developed. With this in hand, the researcher can know when the jet data being measured is being contaminated and design the experiment around this limitation. Also considered is the question of uncertainty, where it is shown that there is a fundamental uncertainty of 0.5dB or so to the best experiments, confirmed by repeatability studies. One area not generally accounted for in the uncertainty analysis is the variation which can result from differences in initial condition of the nozzle shear layer. This initial condition was modified and the differences in both flow and sound were documented. The bottom line is that extreme caution must be applied when working on small jet rigs, but that highly accurate results can be made independent of scale.

Development of an ultra high performance liquid chromatography method for determining triamcinolone acetonide in hydrogels using the design of experiments/design space strategy in combination with process capability index.

PubMed

Oliva, Alexis; Monzón, Cecilia; Santoveña, Ana; Fariña, José B; Llabrés, Matías

2016-07-01

An ultra high performance liquid chromatography method was developed and validated for the quantitation of triamcinolone acetonide in an injectable ophthalmic hydrogel to determine the contribution of analytical method error in the content uniformity measurement. During the development phase, the design of experiments/design space strategy was used. For this, the free R-program was used as a commercial software alternative, a fast efficient tool for data analysis. The process capability index was used to find the permitted level of variation for each factor and to define the design space. All these aspects were analyzed and discussed under different experimental conditions by the Monte Carlo simulation method. Second, a pre-study validation procedure was performed in accordance with the International Conference on Harmonization guidelines. The validated method was applied for the determination of uniformity of dosage units and the reasons for variability (inhomogeneity and the analytical method error) were analyzed based on the overall uncertainty. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

2-D Circulation Control Airfoil Benchmark Experiments Intended for CFD Code Validation

NASA Technical Reports Server (NTRS)

Englar, Robert J.; Jones, Gregory S.; Allan, Brian G.; Lin, Johb C.

2009-01-01

A current NASA Research Announcement (NRA) project being conducted by Georgia Tech Research Institute (GTRI) personnel and NASA collaborators includes the development of Circulation Control (CC) blown airfoils to improve subsonic aircraft high-lift and cruise performance. The emphasis of this program is the development of CC active flow control concepts for both high-lift augmentation, drag control, and cruise efficiency. A collaboration in this project includes work by NASA research engineers, whereas CFD validation and flow physics experimental research are part of NASA s systematic approach to developing design and optimization tools for CC applications to fixed-wing aircraft. The design space for CESTOL type aircraft is focusing on geometries that depend on advanced flow control technologies that include Circulation Control aerodynamics. The ability to consistently predict advanced aircraft performance requires improvements in design tools to include these advanced concepts. Validation of these tools will be based on experimental methods applied to complex flows that go beyond conventional aircraft modeling techniques. This paper focuses on recent/ongoing benchmark high-lift experiments and CFD efforts intended to provide 2-D CFD validation data sets related to NASA s Cruise Efficient Short Take Off and Landing (CESTOL) study. Both the experimental data and related CFD predictions are discussed.

Aging aircraft NDI Development and Demonstration Center (AANC): An overview. [nondestructive inspection

NASA Technical Reports Server (NTRS)

Walter, Patrick L.

1992-01-01

A major center with emphasis on validation of nondestructive inspection (NDI) techniques for aging aircraft, the Aging Aircraft NDI Development and Demonstration Center (AANC), has been funded by the FAA at Sandia National Laboratories. The Center has been assigned specific tasks in developing techniques for the nondestructive inspection of static engine parts, assessing inspection reliability (POD experiments), developing testbeds for NDI validation, maintaining a FAA library of characterized aircraft structural test specimens, and leasing a hangar to house a high flight cycle transport aircraft for use as a full scale test bed.

Psychometric Properties of Korean Version of the Second Victim Experience and Support Tool (K-SVEST).

PubMed

Kim, Eun-Mi; Kim, Sun-Aee; Lee, Ju-Ry; Burlison, Jonathan D; Oh, Eui Geum

2018-02-13

"Second victims" are defined as healthcare professionals whose wellness is influenced by adverse clinical events. The Second Victim Experience and Support Tool (SVEST) was used to measure the second-victim experience and quality of support resources. Although the reliability and validity of the original SVEST have been validated, those for the Korean tool have not been validated. The aim of the study was to evaluate the psychometric properties of the Korean version of the SVEST. The study included 305 clinical nurses as participants. The SVEST was translated into Korean via back translation. Content validity was assessed by seven experts, and test-retest reliability was evaluated by 30 clinicians. Internal consistency and construct validity were assessed via confirmatory factor analysis. The analyses were performed using SPSS 23.0 and STATA 13.0 software. The content validity index value demonstrated validity; item- and scale-level content validity index values were both 0.95. Test-retest reliability and internal consistency reliability were satisfactory: the intraclass consistent coefficient was 0.71, and Cronbach α values ranged from 0.59 to 0.87. The CFA showed a significantly good fit for an eight-factor structure (χ = 578.21, df = 303, comparative fit index = 0.92, Tucker-Lewis index = 0.90, root mean square error of approximation = 0.05). The K-SVEST demonstrated good psychometric properties and adequate validity and reliability. The results showed that the Korean version of SVEST demonstrated the extent of second victimhood and support resources in Korean healthcare workers and could aid in the development of support programs and evaluation of their effectiveness.

Challenges in implementing national systems of competency validation with regard to adult learning professionals: Perspectives from Romania and India

NASA Astrophysics Data System (ADS)

Sava, Simona Lidia; Shah, S. Y.

2015-08-01

Validation of prior learning (VPL), also referred to as recognition, validation and accreditation of prior learning (RVA), is becoming an increasingly important political issue at both European and international levels. In 2012, the European Council, the UNESCO Institute for Lifelong Learning (UIL) and the Organisation for Economic Co-operation and Development (OECD) launched strategic documents and guidelines for supporting its wide implementation. A wide range of resources and experiences to learn from are already available for improving policy making and the quality and credibility of VPL practices. An intrinsic part of quality assurance concerns the level of training of practitioners accompanying the VPL process. Addressing the need for improved practices of adult educators' continuing professional development as well as improved validation processes, this paper presents and analyses practitioners' experiences with a piloted portfolio tool designed to support the validation of pedagogic competencies of trainers in adult education. While the pilot study was carried out in 20 European and 2 non-European countries, this article picks out and compares feedback from participants in Romania and India, which are both striving to catch up in terms of accreditation of non-formal and informal learning. Based on their findings, the authors' reflections focus in particular on evident challenges for educational policy making in these two very different countries. They also consider related policy measures needed for improving the educational contexts in both countries, both in terms of validation practices and in terms of the professional development of practitioners applying such practices, in line with international trends.

The Volunteer Satisfaction Index: A Validation Study in the Chinese Cultural Context

ERIC Educational Resources Information Center

Wong, Lok Ping; Chui, Wing Hong; Kwok, Yan Yuen

2011-01-01

Using a Hong Kong-sourced sample of 261 participants, this study set out to validate the Volunteer Satisfaction Index (VSI) in the Chinese cultural context and to evaluate its psychometric properties. The VSI was originally developed by Galindo-Kuhn and Guzley (2001) to measure the outcomes of volunteer experiences. In this study, exploratory…

Using Academia-Industry Partnerships to Enhance Software Verification & Validation Education via Active Learning Tools

ERIC Educational Resources Information Center

Acharya, Sushil; Manohar, Priyadarshan; Wu, Peter; Schilling, Walter

2017-01-01

Imparting real world experiences in a software verification and validation (SV&V) course is often a challenge due to the lack of effective active learning tools. This pedagogical requirement is important because graduates are expected to develop software that meets rigorous quality standards in functional and application domains. Realizing the…

Utilization of Airborne and in Situ Data Obtained in SGP99, SMEX02, CLASIC and SMAPVEX08 Field Campaigns for SMAP Soil Moisture Algorithm Development and Validation

NASA Technical Reports Server (NTRS)

Colliander, Andreas; Chan, Steven; Yueh, Simon; Cosh, Michael; Bindlish, Rajat; Jackson, Tom; Njoku, Eni

2010-01-01

Field experiment data sets that include coincident remote sensing measurements and in situ sampling will be valuable in the development and validation of the soil moisture algorithms of the NASA's future SMAP (Soil Moisture Active and Passive) mission. This paper presents an overview of the field experiment data collected from SGP99, SMEX02, CLASIC and SMAPVEX08 campaigns. Common in these campaigns were observations of the airborne PALS (Passive and Active L- and S-band) instrument, which was developed to acquire radar and radiometer measurements at low frequencies. The combined set of the PALS measurements and ground truth obtained from all these campaigns was under study. The investigation shows that the data set contains a range of soil moisture values collected under a limited number of conditions. The quality of both PALS and ground truth data meets the needs of the SMAP algorithm development and validation. The data set has already made significant impact on the science behind SMAP mission. The areas where complementing of the data would be most beneficial are also discussed.

Development, Validation and Parametric study of a 3-Year-Old Child Head Finite Element Model

NASA Astrophysics Data System (ADS)

Cui, Shihai; Chen, Yue; Li, Haiyan; Ruan, ShiJie

2015-12-01

Traumatic brain injury caused by drop and traffic accidents is an important reason for children's death and disability. Recently, the computer finite element (FE) head model has been developed to investigate brain injury mechanism and biomechanical responses. Based on CT data of a healthy 3-year-old child head, the FE head model with detailed anatomical structure was developed. The deep brain structures such as white matter, gray matter, cerebral ventricle, hippocampus, were firstly created in this FE model. The FE model was validated by comparing the simulation results with that of cadaver experiments based on reconstructing the child and adult cadaver experiments. In addition, the effects of skull stiffness on the child head dynamic responses were further investigated. All the simulation results confirmed the good biofidelity of the FE model.

The Experiences in Close Relationship Scale (ECR)-short form: reliability, validity, and factor structure.

PubMed

Wei, Meifen; Russell, Daniel W; Mallinckrodt, Brent; Vogel, David L

2007-04-01

We developed a 12-item, short form of the Experiences in Close Relationship Scale (ECR; Brennan, Clark, & Shaver, 1998) across 6 studies. In Study 1, we examined the reliability and factor structure of the measure. In Studies 2 and 3, we cross-validated the reliability, factor structure, and validity of the short form measure; whereas in Study 4, we examined test-retest reliability over a 1-month period. In Studies 5 and 6, we further assessed the reliability, factor structure, and validity of the short version of the ECR when administered as a stand-alone instrument. Confirmatory factor analyses indicated that 2 factors, labeled Anxiety and Avoidance, provided a good fit to the data after removing the influence of response sets. We found validity to be equivalent for the short and the original versions of the ECR across studies. Finally, the results were comparable when we embedded the short form within the original version of the ECR and when we administered it as a stand-alone measure.

CFD Validation Experiment of a Mach 2.5 Axisymmetric Shock-Wave/Boundary-Layer Interaction

NASA Technical Reports Server (NTRS)

Davis, David O.

2015-01-01

Experimental investigations of specific flow phenomena, e.g., Shock Wave Boundary-Layer Interactions (SWBLI), provide great insight to the flow behavior but often lack the necessary details to be useful as CFD validation experiments. Reasons include: 1.Undefined boundary conditions Inconsistent results 2.Undocumented 3D effects (CL only measurements) 3.Lack of uncertainty analysis While there are a number of good subsonic experimental investigations that are sufficiently documented to be considered test cases for CFD and turbulence model validation, the number of supersonic and hypersonic cases is much less. This was highlighted by Settles and Dodsons [1] comprehensive review of available supersonic and hypersonic experimental studies. In all, several hundred studies were considered for their database.Of these, over a hundred were subjected to rigorous acceptance criteria. Based on their criteria, only 19 (12 supersonic, 7 hypersonic) were considered of sufficient quality to be used for validation purposes. Aeschliman and Oberkampf [2] recognized the need to develop a specific methodology for experimental studies intended specifically for validation purposes.

The Transition from Spacecraft Development Ot Flight Operation: Human Factor Considerations

NASA Technical Reports Server (NTRS)

Basilio, Ralph R.

2000-01-01

In the field of aeronautics and astronautics, a paradigm shift has been witnessed by those in academia, research and development, and private industry. Long development life cycles and the budgets to support such programs and projects has given way to aggressive task schedules and leaner resources to draw from all the while challenging assigned individuals to create and produce improved products of processes. however, this "faster, better, cheaper" concept cannot merely be applied to the design, development, and test of complex systems such as earth-orbiting of interplanetary robotic spacecraft. Full advantage is not possible without due consideration and application to mission operations planning and flight operations, Equally as important as the flight system, the mission operations system consisting of qualified personnel, ground hardware and software tools, and verified and validated operational processes, should also be regarded as a complex system requiring personnel to draw upon formal education, training, related experiences, and heuristic reasoning in engineering an effective and efficient system. Unquestionably, qualified personnel are the most important elements of a mission operations system. This paper examines the experiences of the Deep Space I Project, the first in a series of new technology in-flight validation missions sponsored by the United States National Aeronautics and Space Administration (NASA), specifically, in developing a subsystems analysis and technology validation team comprised of former spacecraft development personnel. Human factor considerations are investigated from initial concept/vision formulation; through operational process development; personnel test and training; to initial uplink product development and test support. Emphasis has been placed on challenges and applied or recommended solutions, so as to provide opportunities for future programs and projects to address and disposition potential issues and concerns as early as possible to reap the benefits associated with learning from other's past experiences.

Validity Evidence for a Serious Game to Assess Performance on Critical Pediatric Emergency Medicine Scenarios.

PubMed

Gerard, James M; Scalzo, Anthony J; Borgman, Matthew A; Watson, Christopher M; Byrnes, Chelsie E; Chang, Todd P; Auerbach, Marc; Kessler, David O; Feldman, Brian L; Payne, Brian S; Nibras, Sohail; Chokshi, Riti K; Lopreiato, Joseph O

2018-06-01

We developed a first-person serious game, PediatricSim, to teach and assess performances on seven critical pediatric scenarios (anaphylaxis, bronchiolitis, diabetic ketoacidosis, respiratory failure, seizure, septic shock, and supraventricular tachycardia). In the game, players are placed in the role of a code leader and direct patient management by selecting from various assessment and treatment options. The objective of this study was to obtain supportive validity evidence for the PediatricSim game scores. Game content was developed by 11 subject matter experts and followed the American Heart Association's 2011 Pediatric Advanced Life Support Provider Manual and other authoritative references. Sixty subjects with three different levels of experience were enrolled to play the game. Before game play, subjects completed a 40-item written pretest of knowledge. Game scores were compared between subject groups using scoring rubrics developed for the scenarios. Validity evidence was established and interpreted according to Messick's framework. Content validity was supported by a game development process that involved expert experience, focused literature review, and pilot testing. Subjects rated the game favorably for engagement, realism, and educational value. Interrater agreement on game scoring was excellent (intraclass correlation coefficient = 0.91, 95% confidence interval = 0.89-0.9). Game scores were higher for attendings followed by residents then medical students (Pc < 0.01) with large effect sizes (1.6-4.4) for each comparison. There was a very strong, positive correlation between game and written test scores (r = 0.84, P < 0.01). These findings contribute validity evidence for PediatricSim game scores to assess knowledge of pediatric emergency medicine resuscitation.

Supersonic Combustion Research at NASA

NASA Technical Reports Server (NTRS)

Drummond, J. P.; Danehy, Paul M.; Gaffney, Richard L., Jr.; Tedder, Sarah A.; Cutler, Andrew D.; Bivolaru, Daniel

2007-01-01

This paper discusses the progress of work to model high-speed supersonic reacting flow. The purpose of the work is to improve the state of the art of CFD capabilities for predicting the flow in high-speed propulsion systems, particularly combustor flowpaths. The program has several components including the development of advanced algorithms and models for simulating engine flowpaths as well as a fundamental experimental and diagnostic development effort to support the formulation and validation of the mathematical models. The paper will provide details of current work on experiments that will provide data for the modeling efforts along with the associated nonintrusive diagnostics used to collect the data from the experimental flowfield. Simulation of a recent experiment to partially validate the accuracy of a combustion code is also described.

Valid methods: the quality assurance of test method development, validation, approval, and transfer for veterinary testing laboratories.

PubMed

Wiegers, Ann L

2003-07-01

Third-party accreditation is a valuable tool to demonstrate a laboratory's competence to conduct testing. Accreditation, internationally and in the United States, has been discussed previously. However, accreditation is only I part of establishing data credibility. A validated test method is the first component of a valid measurement system. Validation is defined as confirmation by examination and the provision of objective evidence that the particular requirements for a specific intended use are fulfilled. The international and national standard ISO/IEC 17025 recognizes the importance of validated methods and requires that laboratory-developed methods or methods adopted by the laboratory be appropriate for the intended use. Validated methods are therefore required and their use agreed to by the client (i.e., end users of the test results such as veterinarians, animal health programs, and owners). ISO/IEC 17025 also requires that the introduction of methods developed by the laboratory for its own use be a planned activity conducted by qualified personnel with adequate resources. This article discusses considerations and recommendations for the conduct of veterinary diagnostic test method development, validation, evaluation, approval, and transfer to the user laboratory in the ISO/IEC 17025 environment. These recommendations are based on those of nationally and internationally accepted standards and guidelines, as well as those of reputable and experienced technical bodies. They are also based on the author's experience in the evaluation of method development and transfer projects, validation data, and the implementation of quality management systems in the area of method development.

Three phase heat and mass transfer model for unsaturated soil freezing process: Part 2 - model validation

NASA Astrophysics Data System (ADS)

Zhang, Yaning; Xu, Fei; Li, Bingxi; Kim, Yong-Song; Zhao, Wenke; Xie, Gongnan; Fu, Zhongbin

2018-04-01

This study aims to validate the three-phase heat and mass transfer model developed in the first part (Three phase heat and mass transfer model for unsaturated soil freezing process: Part 1 - model development). Experimental results from studies and experiments were used for the validation. The results showed that the correlation coefficients for the simulated and experimental water contents at different soil depths were between 0.83 and 0.92. The correlation coefficients for the simulated and experimental liquid water contents at different soil temperatures were between 0.95 and 0.99. With these high accuracies, the developed model can be well used to predict the water contents at different soil depths and temperatures.

Using Focus Groups to Validate a Pharmacy Vaccination Training Program.

PubMed

Bushell, Mary; Morrissey, Hana; Ball, Patrick

2015-06-12

Introduction: Focus group methodology is commonly used to quickly collate, integrated views from a variety of different stakeholders. This paper provides an example of how focus groups can be employed to collate expert opinion informing amendments on a newly developed training program for integration into undergraduate pharmacy curricula. Materials and methods: Four focus groups were conducted, across three continents, to determine the appropriateness and reliability of a developed vaccination training program with nested injection skills training. All focus groups were comprised of legitimate experts in the field of vaccination, medicine and/or pharmacy. Results: Themes that emerged across focus groups informed amendments giving rise to a validated version of a training program. Discussion : The rigorous validation of the vaccination training program offers generalizable lessons to inform the design and validation of future training programs intended for the health sector and or pharmacy curricula. Using the knowledge and experience of focus group participants fostered collaborative problem solving and validation of material and concept development. The group dynamics of a focus group allowed synthesis of feedback in an inter-professional manner. Conclusions : This paper provides a demonstration of how focus groups can be structured and used by health researchers to validate a newly developed training program.

Design and validation of instruments to measure knowledge.

PubMed

Elliott, T E; Regal, R R; Elliott, B A; Renier, C M

2001-01-01

Measuring health care providers' learning after they have participated in educational interventions that use experimental designs requires valid, reliable, and practical instruments. A literature review was conducted. In addition, experience gained from designing and validating instruments for measuring the effect of an educational intervention informed this process. The eight main steps for designing, validating, and testing the reliability of instruments for measuring learning outcomes are presented. The key considerations and rationale for this process are discussed. Methods for critiquing and adapting existent instruments and creating new ones are offered. This study may help other investigators in developing valid, reliable, and practical instruments for measuring the outcomes of educational activities.

Validation of a wireless modular monitoring system for structures

NASA Astrophysics Data System (ADS)

Lynch, Jerome P.; Law, Kincho H.; Kiremidjian, Anne S.; Carryer, John E.; Kenny, Thomas W.; Partridge, Aaron; Sundararajan, Arvind

2002-06-01

A wireless sensing unit for use in a Wireless Modular Monitoring System (WiMMS) has been designed and constructed. Drawing upon advanced technological developments in the areas of wireless communications, low-power microprocessors and micro-electro mechanical system (MEMS) sensing transducers, the wireless sensing unit represents a high-performance yet low-cost solution to monitoring the short-term and long-term performance of structures. A sophisticated reduced instruction set computer (RISC) microcontroller is placed at the core of the unit to accommodate on-board computations, measurement filtering and data interrogation algorithms. The functionality of the wireless sensing unit is validated through various experiments involving multiple sensing transducers interfaced to the sensing unit. In particular, MEMS-based accelerometers are used as the primary sensing transducer in this study's validation experiments. A five degree of freedom scaled test structure mounted upon a shaking table is employed for system validation.

Style preference survey: a report on the psychometric properties and a cross-validation experiment.

PubMed

Smith, Sherri L; Ricketts, Todd; McArdle, Rachel A; Chisolm, Theresa H; Alexander, Genevieve; Bratt, Gene

2013-02-01

Several self-report measures exist that target different aspects of outcomes for hearing aid use. Currently, no comprehensive questionnaire specifically assesses factors that may be important for differentiating outcomes pertaining to hearing aid style. The goal of this work was to develop the Style Preference Survey (SPS), a questionnaire aimed at outcomes associated with hearing aid style differences. Two experiments were conducted. After initial item development, Experiment 1 was conducted to refine the items and to determine its psychometric properties. Experiment 2 was designed to cross-validate the findings from the initial experiment. An observational design was used in both experiments. Participants who wore traditional, custom-fitted (TC) or open-canal (OC) style hearing aids from 3 mo to 3 yr completed the initial experiment. One-hundred and eighty-four binaural hearing aid users (120 of whom wore TC hearing aids and 64 of whom wore OC hearing aids) participated. A new sample of TC and OC users (n = 185) participated in the cross-validation experiment. Currently available self-report measures were reviewed to identify items that might differentiate between hearing aid styles, particularly preference for OC versus TC hearing aid styles. A total of 15 items were selected and modified from available self-report measures. An additional 55 items were developed through consensus of six audiologists for the initial version of the SPS. In the first experiment, the initial SPS version was mailed to 550 veterans who met the inclusion criteria. A total of 184 completed the SPS. Approximately three weeks later, a subset of participants (n = 83) completed the SPS a second time. Basic analyses were conducted to evaluate the psychometric properties of the SPS including subscale structure, internal consistency, test-retest reliability, and responsiveness. Based on the results of Experiment 1, the SPS was revised. A cross-validation experiment was then conducted using the revised version of the SPS to confirm the subscale structure, internal consistency, and responsiveness of the questionnaire in a new sample of participants. The final factor analysis led to the ultimate version of the SPS, which had a total of 35 items encompassing five subscales: (1) Feedback, (2) Occlusion/Own Voice Effects, (3) Localization, (4) Fit, Comfort, and Cosmetics, and (5) Ease of Use. The internal consistency of the total SPS (Cronbach's α = .92) and of the subscales (each Cronbach's α > .75) was high. Intraclass correlations (ICCs) showed that the test-retest reliability of the total SPS (ICC = .93) and of the subscales (each ICC > .80) also was high. TC hearing aid users had significantly poorer outcomes than OC hearing aid users on 4 of the 5 subscales, suggesting that the SPS largely is responsive to factors related to style-specific differences. The results suggest that the SPS has good psychometric properties and is a valid and reliable measure of outcomes related to style-specific, hearing aid preference. American Academy of Audiology.

Large-scale experimental technology with remote sensing in land surface hydrology and meteorology

NASA Technical Reports Server (NTRS)

Brutsaert, Wilfried; Schmugge, Thomas J.; Sellers, Piers J.; Hall, Forrest G.

1988-01-01

Two field experiments to study atmospheric and land surface processes and their interactions are summarized. The Hydrologic-Atmospheric Pilot Experiment, which tested techniques for measuring evaporation, soil moisture storage, and runoff at scales of about 100 km, was conducted over a 100 X 100 km area in France from mid-1985 to early 1987. The first International Satellite Land Surface Climatology Program field experiment was conducted in 1987 to develop and use relationships between current satellite measurements and hydrologic, climatic, and biophysical variables at the earth's surface and to validate these relationships with ground truth. This experiment also validated surface parameterization methods for simulation models that describe surface processes from the scale of vegetation leaves up to scales appropriate to satellite remote sensing.

Development of the Packed Bed Reactor ISS Flight Experiment

NASA Technical Reports Server (NTRS)

Patton, Martin O.; Bruzas, Anthony E.; Rame, Enrique; Motil, Brian J.

2012-01-01

Packed bed reactors are compact, require minimum power and maintenance to operate, and are highly reliable. These features make this technology a leading candidate as a potential unit operation in support of long duration human space exploration. On earth, this type of reactor accounts for approximately 80% of all the reactors used in the chemical process industry today. Development of this technology for space exploration is truly crosscutting with many other potential applications (e.g., in-situ chemical processing of planetary materials and transport of nutrients through soil). NASA is developing an ISS experiment to address this technology with particular focus on water reclamation and air revitalization. Earlier research and development efforts funded by NASA have resulted in two hydrodynamic models which require validation with appropriate instrumentation in an extended microgravity environment. The first model developed by Motil et al., (2003) is based on a modified Ergun equation. This model was demonstrated at moderate gas and liquid flow rates, but extension to the lower flow rates expected in many advanced life support systems must be validated. The other model, developed by Guo et al., (2004) is based on Darcy s (1856) law for two-phase flow. This model has been validated for a narrow range of flow parameters indirectly (without full instrumentation) and included test points where the flow was not fully developed. The flight experiment presented will be designed with removable test sections to test the hydrodynamic models. The experiment will provide flexibility to test additional beds with different types of packing in the future. One initial test bed is based on the VRA (Volatile Removal Assembly), a packed bed reactor currently on ISS whose behavior in micro-gravity is not fully understood. Improving the performance of this system through an accurate model will increase our ability to purify water in the space environment.

Development and Implementation of Minimum Hiring Specifications

ERIC Educational Resources Information Center

Herbstritt, Michael R.

1978-01-01

Specifications were developed to avoid possible discrimination and confusion in the hiring practices at a large southeastern university. They were developed through job analysis and a systematic file search designed to find the education and prior related work experience possessed by each incumbent. The specifications were validated as…

Development of Thermal Radiation Experiments Kit Based on Data Logger for Physics Learning Media

NASA Astrophysics Data System (ADS)

Permana, H.; Iswanto, B. H.

2018-04-01

Thermal Radiation Experiments Kit (TREK) based on data logger for physics learning media was developed. TREK will be used as a learning medium on the subject of Temperature and Heat to explain the concept of emissivity of a material in grade XI so that it can add variations of experiments which are commonly done such as thermal expansion, transfer of thermal energy (conduction, convection, and radiation), and specific heat capacity. DHT11 sensor is used to measure temperature and microcontroller Arduino-uno used as data logger. The object tested are in the form of coated glass thin films and aluminum with different colors. TREK comes with a user manual and student worksheet (LKS) to make it easier for teachers and students to use. TREK was developed using the ADDIE Development Model (Analyze, Design, Development, Implementation, and Evaluation). And validated by experts, physics teachers, and students. Validation instrument is a questionnaire with a five-item Likert response scale with reviewed aspect coverage: appropriate content and concepts, design, and user friendly. The results showed that TREK was excellent (experts 88.13%, science teachers 95.68%, and students 85.77%).

A self-report measure of legal and administrative aggression within intimate relationships.

PubMed

Hines, Denise A; Douglas, Emily M; Berger, Joshua L

2015-01-01

Although experts agree that intimate partner violence (IPV) is a multidimensional phenomenon comprised of both physical and non-physical acts, there is no measure of legal and administrative (LA) forms of IPV. LA aggression is when one partner manipulates the legal and other administrative systems to the detriment of his/her partner. Our measure was developed using the qualitative literature on male IPV victims' experiences. We tested the reliability and validity of our LA aggression measure on two samples of men: 611 men who sustained IPV and sought help, and 1,601 men in a population-based sample. Construct validity of the victimization scale was supported through factor analyses, correlations with other forms of IPV victimization, and comparisons of the rates of LA aggression between the two samples; reliability was established through Cronbach's alpha. Evidence for the validity and reliability of the perpetration scale was mixed and therefore needs further analyses and revisions before we can recommend its use in empirical work. There is initial support for the victimization scale as a valid and reliable measure of LA aggression victimization among men, but work is needed using women's victimization's experiences to establish reliability and validity of this measure for women. An LA aggression measure should be developed using LGBTQ victims' experiences, and for couples who are well into the divorce and child custody legal process. Legal personnel and practitioners should be educated on this form of IPV so that they can appropriately work with clients who have been victimized or perpetrate LA aggression. © 2014 Wiley Periodicals, Inc.

Inter-Disciplinary Collaboration in Support of the Post-Standby TREAT Mission

DOE Office of Scientific and Technical Information (OSTI.GOV)

DeHart, Mark; Baker, Benjamin; Ortensi, Javier

Although analysis methods have advanced significantly in the last two decades, high fidelity multi- physics methods for reactors systems have been under development for only a few years and are not presently mature nor deployed. Furthermore, very few methods provide the ability to simulate rapid transients in three dimensions. Data for validation of advanced time-dependent multi- physics is sparse; at TREAT, historical data were not collected for the purpose of validating three-dimensional methods, let alone multi-physics simulations. Existing data continues to be collected to attempt to simulate the behavior of experiments and calibration transients, but it will be insufficient formore » the complete validation of analysis methods used for TREAT transient simulations. Hence, a 2018 restart will most likely occur without the direct application of advanced modeling and simulation methods. At present, the current INL modeling and simulation team plans to work with TREAT operations staff in performing reactor simulations with MAMMOTH, in parallel with the software packages currently being used in preparation for core restart (e.g., MCNP5, RELAP5, ABAQUS). The TREAT team has also requested specific measurements to be performed during startup testing, currently scheduled to run from February to August of 2018. These startup measurements will be crucial in validating the new analysis methods in preparation for ultimate application for TREAT operations and experiment design. This document describes the collaboration between modeling and simulation staff and restart, operations, instrumentation and experiment development teams to be able to effectively interact and achieve successful validation work during restart testing.« less

Development and validation of a low-cost mobile robotics testbed

NASA Astrophysics Data System (ADS)

Johnson, Michael; Hayes, Martin J.

2012-03-01

This paper considers the design, construction and validation of a low-cost experimental robotic testbed, which allows for the localisation and tracking of multiple robotic agents in real time. The testbed system is suitable for research and education in a range of different mobile robotic applications, for validating theoretical as well as practical research work in the field of digital control, mobile robotics, graphical programming and video tracking systems. It provides a reconfigurable floor space for mobile robotic agents to operate within, while tracking the position of multiple agents in real-time using the overhead vision system. The overall system provides a highly cost-effective solution to the topical problem of providing students with practical robotics experience within severe budget constraints. Several problems encountered in the design and development of the mobile robotic testbed and associated tracking system, such as radial lens distortion and the selection of robot identifier templates are clearly addressed. The testbed performance is quantified and several experiments involving LEGO Mindstorm NXT and Merlin System MiaBot robots are discussed.

Development and validation of the FertiMed questionnaire assessing patients' experiences with hormonal fertility medication.

PubMed

Lankreijer, K; D'Hooghe, T; Sermeus, W; van Asseldonk, F P M; Repping, S; Dancet, E A F

2016-08-01

Can a valid and reliable questionnaire be developed to assess patients' experiences with all of the characteristics of hormonal fertility medication valued by them? The FertiMed questionnaire is a valid and reliable tool that assesses patients' experiences with all medication characteristics valued by them and that can be used for all hormonal fertility medications, irrespective of their route of administration. Hormonal fertility medications cause emotional strain and differ in their dosage regime and route of administration, although they often have comparable effectiveness. Medication experiences of former patients would be informative for medication choices. A recent literature review showed that there is no trustworthy tool to compare patients' experiences of medications with differing routes of administration, regarding all medication characteristics which patients value. The items of the new FertiMed questionnaire were generated by literature review and 23 patient interviews. In 2013, 411 IVF-patients were asked to retrospectively complete the FertiMed questionnaire to assess 1 out of the 8 different medications used for ovarian stimulation, induction of pituitary quiescence, ovulation triggering or luteal support. In total, 276 patients (on average 35 per medication) from 2 university fertility clinics (Belgium, the Netherlands) completed the FertiMed questionnaire (67% response rate). The FertiMed questionnaire questioned whether items were valued by patients and whether these items were experienced while using the assessed medication. Hence, the final outcome 'Experiences with Valued Aspects Scores' (EVAS) combined importance and experience ratings. The content and face validity, reliability, feasibility and discriminative potential of the FertiMed questionnaire were tested and changes were made accordingly. Patient interviews defined 51 items relevant to seven medication characteristics previously proved to be important to patients. Item analysis deleted 10 items. The combined results from the reliability and content validity analysis identified 10 characteristics instead of 7. The final FertiMed questionnaire was valid (Adapted Goodness of Fit Index = 0.95) and all but one characteristic ('ease of use: disturbance') could be assessed reliably (Cronbach's α > 0.60). The EVAS per characteristic differed between the medications inducing pituitary quiescence (P = 0.001). As all eight medications prescribed in the recruiting clinics were questioned, sample sizes per medication were rather small for presenting EVAS per medication and for testing the discriminative potential of the FertiMed questionnaire. The FertiMed questionnaire can be used for all hormonal fertility medications to assess in a valid and reliable way whether patients experience what they value regarding 10 medication characteristics (e.g. side effects and ease of use). Future randomized controlled trials (RCT) comparing medications could include the FertiMed questionnaire as a Patient Reported Experience Measure (PREM). Insights from these RCTs could be used to develop evidence-based decision aids aiming to facilitate shared physician-patient medication choices. Funding was received from the University of Leuven and Amsterdam University Medical Centre. E.A.F.D. holds a postdoctoral fellowship of the Research Foundation of Flanders. T.D. was appointed Vice-President and Head Global Medical Affairs Fertility at Merck (Darmstadt, Germany) on 1 October 2015. The reported project was initiated and finished before this date. The other authors had no conflicts of interest to declare. © The Author 2016. Published by Oxford University Press on behalf of the European Society of Human Reproduction and Embryology. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Mass Spectrometry for the Masses

ERIC Educational Resources Information Center

Persinger, Jared D.; Hoops, Geoffrey, C.; Samide, Michael J.

2004-01-01

A simple, qualitative experiment is developed for implementation, where the gas chromatography-mass spectrometry (GC-MS) plays an important role, into the laboratory curriculum of a chemistry course designed for nonscience majors. This laboratory experiment is well suited for the students as it helps them to determine the validity of their…

Psychometric Properties of Work-Related Behavior and Experience Patterns (AVEM) Scale

ERIC Educational Resources Information Center

Gencer, R. Timucin; Boyacioglu, Hayal; Kiremitci, Olcay; Dogan, Birol

2010-01-01

"Work-Related Behaviour and Experience Patterns" (AVEM) has been developed with the intention of determining the occupation related behaviour and lifestyle models of professionals. This study has been conducted to test the validity and reliability of MEDYAM, the abbreviated Turkish equivalent of AVEM. 373 teachers from 10 different…

Implementation and Analysis of Hemodialysis in the Unit Operations Laboratory

ERIC Educational Resources Information Center

Madihally, Sundararajan V.; Lewis, Randy S.

2007-01-01

To enhance bioengineering in the chemical engineering curriculum, a Unit Operations experiment simulating the hemodialysis of creatinine was implemented. The blood toxin creatinine was used for developing a more realistic dialysis experiment. A dialysis model is presented that allows students to assess the validity of model assumptions. This work…

Development of a Child Abuse Checklist to Evaluate Prehospital Provider Performance.

PubMed

Alphonso, Aimee; Auerbach, Marc; Bechtel, Kirsten; Bilodeau, Kyle; Gawel, Marcie; Koziel, Jeannette; Whitfill, Travis; Tiyyagura, Gunjan Kamdar

2017-01-01

To develop and provide validity evidence for a performance checklist to evaluate the child abuse screening behaviors of prehospital providers. Checklist Development: We developed the first iteration of the checklist after review of the relevant literature and on the basis of the authors' clinical experience. Next, a panel of six content experts participated in three rounds of Delphi review to reach consensus on the final checklist items. Checklist Validation: Twenty-eight emergency medical services (EMS) providers (16 EMT-Basics, 12 EMT-Paramedics) participated in a standardized simulated case of physical child abuse to an infant followed by one-on-one semi-structured qualitative interviews. Three reviewers scored the videotaped performance using the final checklist. Light's kappa and Cronbach's alpha were calculated to assess inter-rater reliability (IRR) and internal consistency, respectively. The correlation of successful child abuse screening with checklist task completion and with participant characteristics were compared using Pearson's chi squared test to gather evidence for construct validity. The Delphi review process resulted in a final checklist that included 24 items classified with trichotomous scoring (done, not done, or not applicable). The overall IRR of the three raters was 0.70 using Light's kappa, indicating substantial agreement. Internal consistency of the checklist was low, with an overall Cronbach's alpha of 0.61. Of 28 participants, only 14 (50%) successfully screened for child abuse in simulation. Participants who successfully screened for child abuse did not differ significantly from those who failed to screen in terms of training level, past experience with child abuse reporting, or self-reported confidence in detecting child abuse (all p > 0.30). Of all 24 tasks, only the task of exposing the infant significantly correlated with successful detection of child abuse (p < 0.05). We developed a child abuse checklist that demonstrated strong content validity and substantial inter-rater reliability, but successful item completion did not correlate with other markers of provider experience. The validated instrument has important potential for training, continuing education, and research for prehospital providers at all levels of training.

Measuring parents' experiences and satisfaction with care during very preterm birth: a questionnaire development study

PubMed Central

Sawyer, A; Rabe, H; Abbott, J; Gyte, G; Duley, L; Ayers, S

2014-01-01

Objective To develop a questionnaire to assess parents' experiences and satisfaction with care during very preterm birth. Design Questionnaire development. Setting Parents whose babies had been cared for at five tertiary neonatal units in England. Population A total of 145 women who gave birth before 32 weeks of gestation, and 85 of their partners. Methods A 30-item questionnaire was developed on the basis of qualitative interviews with parents of very preterm babies, a literature review and discussion with relevant experts. The questionnaire was posted to a second group of parents, and its reliability and validity were explored. Main outcome measures The Preterm Birth Experience and Satisfaction Scale (P-BESS) was correlated with two global questions measuring satisfaction with care during the birth. Internal consistency was measured using Cronbach's α. Results Parents of 458 babies were invited to take part and 147 (32%) responded. Two women and 22 partners were excluded or ineligible, leaving 145 women and 85 partners. Factor analysis produced three clear dimensions: Staff professionalism and empathy, Information and explanations, and Confidence in staff. The total scale and three subscales showed high reliability. Strong positive correlations were found between the questionnaire scales and the two global questions, indicating convergent validity. For women whose partners were present at the birth, a fourth factor was identified ‘Partner Involvement’. Conclusions The P-BESS appears to be a valid measure of satisfaction with care during very preterm birth. PMID:24953082

Examining students' views about validity of experiments: From introductory to Ph.D. students

NASA Astrophysics Data System (ADS)

Hu, Dehui; Zwickl, Benjamin M.

2018-06-01

We investigated physics students' epistemological views on measurements and validity of experimental results. The roles of experiments in physics have been underemphasized in previous research on students' personal epistemology, and there is a need for a broader view of personal epistemology that incorporates experiments. An epistemological framework incorporating the structure, methodology, and validity of scientific knowledge guided the development of an open-ended survey. The survey was administered to students in algebra-based and calculus-based introductory physics courses, upper-division physics labs, and physics Ph.D. students. Within our sample, we identified several differences in students' ideas about validity and uncertainty in measurement. The majority of introductory students justified the validity of results through agreement with theory or with results from others. Alternatively, Ph.D. students frequently justified the validity of results based on the quality of the experimental process and repeatability of results. When asked about the role of uncertainty analysis, introductory students tended to focus on the representational roles (e.g., describing imperfections, data variability, and human mistakes). However, advanced students focused on the inferential roles of uncertainty analysis (e.g., quantifying reliability, making comparisons, and guiding refinements). The findings suggest that lab courses could emphasize a variety of approaches to establish validity, such as by valuing documentation of the experimental process when evaluating the quality of student work. In order to emphasize the role of uncertainty in an authentic way, labs could provide opportunities to iterate, make repeated comparisons, and make decisions based on those comparisons.

What Makes AS Marking Reliable? An Experiment with Some Stages from the Standardisation Process

ERIC Educational Resources Information Center

Greatorex, Jackie; Bell, John F.

2008-01-01

It is particularly important that GCSE and A-level marking is valid and reliable as it affects the life chances of many young people in England. Current developments in marking technology are coinciding with potential changes in procedures to ensure valid and reliable marking. In this research the effectiveness of procedures to facilitate the…

AMSR Validation Program

NASA Astrophysics Data System (ADS)

Lobl, E. S.

2003-12-01

AMSR and AMSR-E are passive microwave radiometers built by NASDA in Japan. AMSR flies on ADEOS II, launched December 14 2001, and AMSR-E flies on NASA's Aqua satellite, launched May 4 2001. The Science teams in both countries have developed algorithms to retrieve different atmospheric parameters from the data obtained by these radiometers. The US Science team has developed a Validation plan that involved several campaigns. In fact most of these campaign have taken place this year: 2003, nicknamed the "Golden Year" for AMSR Validation. The first campaign started in January 2003 with the Extra-tropical precipitation campaign, followed by IOP3 for Cold Lands Processes Experiment (CLPX) in Colorado. After the change out of some of the instruments, the Validation program continued with the Arctic Sea Ice campaign based in Alaska, and followed by CLPX IOP 4, back in Colorado. Soil Moisture EXperiment 03 (SMEX03) started in late June in Alabama and Georgia, and then completed in Oklahoma mid-July. The last campaign in this series is AMSR Antarctic Sea Ice (AASI)/SMEX in Brazil. The major goals of each campaign, and very preliminary data will be shown. Most of these campaigns were in collaboration with the Japanese AMSR scientists.

Analytic Modeling of Pressurization and Cryogenic Propellant Conditions for Lunar Landing Vehicle

NASA Technical Reports Server (NTRS)

Corpening, Jeremy

2010-01-01

This slide presentation reviews the development, validation and application of the model to the Lunar Landing Vehicle. The model named, Computational Propellant and Pressurization Program -- One Dimensional (CPPPO), is used to model in this case cryogenic propellant conditions of the Altair Lunar lander. The validation of CPPPO was accomplished via comparison to an existing analytic model (i.e., ROCETS), flight experiment and ground experiments. The model was used to the Lunar Landing Vehicle perform a parametric analysis on pressurant conditions and to examine the results of unequal tank pressurization and draining for multiple tank designs.

Onboard Autonomy and Ground Operations Automation for the Intelligent Payload Experiment (IPEX) CubeSat Mission

NASA Technical Reports Server (NTRS)

Chien, Steve; Doubleday, Joshua; Ortega, Kevin; Tran, Daniel; Bellardo, John; Williams, Austin; Piug-Suari, Jordi; Crum, Gary; Flatley, Thomas

2012-01-01

The Intelligent Payload Experiment (IPEX) is a cubesat manifested for launch in October 2013 that will flight validate autonomous operations for onboard instrument processing and product generation for the Intelligent Payload Module (IPM) of the Hyperspectral Infra-red Imager (HyspIRI) mission concept. We first describe the ground and flight operations concept for HyspIRI IPM operations. We then describe the ground and flight operations concept for the IPEX mission and how that will validate HyspIRI IPM operations. We then detail the current status of the mission and outline the schedule for future development.

Replicating the Z iron opacity experiments on the NIF

NASA Astrophysics Data System (ADS)

Perry, T. S.; Heeter, R. F.; Opachich, Y. P.; Ross, P. W.; Kline, J. L.; Flippo, K. A.; Sherrill, M. E.; Dodd, E. S.; DeVolder, B. G.; Cardenas, T.; Archuleta, T. N.; Craxton, R. S.; Zhang, R.; McKenty, P. W.; Garcia, E. M.; Huffman, E. J.; King, J. A.; Ahmed, M. F.; Emig, J. A.; Ayers, S. L.; Barrios, M. A.; May, M. J.; Schneider, M. B.; Liedahl, D. A.; Wilson, B. G.; Urbatsch, T. J.; Iglesias, C. A.; Bailey, J. E.; Rochau, G. A.

2017-06-01

X-ray opacity is a crucial factor of all radiation-hydrodynamics calculations, yet it is one of the least validated of the material properties in the simulation codes. Recent opacity experiments at the Sandia Z-machine have shown up to factors of two discrepancies between theory and experiment, casting doubt on the validity of the opacity models. Therefore, a new experimental opacity platform is being developed on the National Ignition Facility (NIF) not only to verify the Z-machine experimental results but also to extend the experiments to other temperatures and densities. The first experiments will be directed towards measuring the opacity of iron at a temperature of ∼160 eV and an electron density of ∼7 × 1021 cm-3. Preliminary experiments on NIF have demonstrated the ability to create a sufficiently bright point backlighter using an imploding plastic capsule and also a hohlraum that can heat the opacity sample to the desired conditions. The first of these iron opacity experiments is expected to be performed in 2017.

Smartkuber: A Serious Game for Cognitive Health Screening of Elderly Players.

PubMed

Boletsis, Costas; McCallum, Simon

2016-08-01

The goal of this study was to design and develop a serious game for cognitive health screening of the elderly, namely Smartkuber, and evaluate its construct, criteria (concurrent and predictive), and content validity, assessing its relationship with the Montreal Cognitive Assessment (MoCA) test. Furthermore, the study aims to evaluate the elderly players' game experience with Smartkuber. Thirteen older adults were enrolled in the study. The game was designed and developed by a multidisciplinary team. The study follows a mixed methodological approach, utilizing the In-Game Experience Questionnaire to assess the players' game experience and a correlational study, to examine the relationship between the Smartkuber and MoCA scores. The learning effect is also examined by comparing the mean game scores of the first and last game sessions of each player (Delta scores). All 13 participants (mean age: 68.69, SD: 7.24) successfully completed the study. Smartkuber demonstrated high concurrent validity with the MoCA test (r = 0.81, P = 0.001) and satisfying levels of predictive and content validity. The Delta scores showed no statistically significant differences in scoring, thus indicating no learning effects during the Smartkuber game sessions. The study shows that Smartkuber is a promising tool for cognitive health screening, providing an entertaining and motivating gaming experience to elderly players. Limitations of the study and future directions are discussed.

Why Do I Feel More Confident? Bandura's Sources Predict Preservice Teachers' Latent Changes in Teacher Self-Efficacy

PubMed Central

Pfitzner-Eden, Franziska

2016-01-01

Teacher self-efficacy (TSE) is associated with a multitude of positive outcomes for teachers and students. However, the development of TSE is an under-researched area. Bandura (1997) proposed four sources of self-efficacy: mastery experiences, vicarious experiences, verbal persuasion, and physiological and affective states. This study introduces a first instrument to assess the four sources for TSE in line with Bandura's conception. Gathering evidence of convergent validity, the contribution that each source made to the development of TSE during a practicum at a school was explored for two samples of German preservice teachers. The first sample (N = 359) were beginning preservice teachers who completed an observation practicum. The second sample (N = 395) were advanced preservice teachers who completed a teaching practicum. The source measure showed good reliability, construct validity, and convergent validity. Latent true change modeling was applied to explore how the sources predicted changes in TSE. Three different models were compared. As expected, results showed that TSE changes in both groups were significantly predicted by mastery experiences, with a stronger relationship in the advanced group. Further, the results indicated that mastery experiences were largely informed by the other three sources to varying degrees depending on the type of practicum. Implications for the practice of teacher education are discussed in light of the results. PMID:27807422

Why Do I Feel More Confident? Bandura's Sources Predict Preservice Teachers' Latent Changes in Teacher Self-Efficacy.

PubMed

Pfitzner-Eden, Franziska

2016-01-01

Teacher self-efficacy (TSE) is associated with a multitude of positive outcomes for teachers and students. However, the development of TSE is an under-researched area. Bandura (1997) proposed four sources of self-efficacy: mastery experiences, vicarious experiences, verbal persuasion, and physiological and affective states. This study introduces a first instrument to assess the four sources for TSE in line with Bandura's conception. Gathering evidence of convergent validity, the contribution that each source made to the development of TSE during a practicum at a school was explored for two samples of German preservice teachers. The first sample ( N = 359) were beginning preservice teachers who completed an observation practicum. The second sample ( N = 395) were advanced preservice teachers who completed a teaching practicum. The source measure showed good reliability, construct validity, and convergent validity. Latent true change modeling was applied to explore how the sources predicted changes in TSE. Three different models were compared. As expected, results showed that TSE changes in both groups were significantly predicted by mastery experiences, with a stronger relationship in the advanced group. Further, the results indicated that mastery experiences were largely informed by the other three sources to varying degrees depending on the type of practicum. Implications for the practice of teacher education are discussed in light of the results.

Trait and state anxiety across academic evaluative contexts: development and validation of the MTEA-12 and MSEA-12 scales.

PubMed

Sotardi, Valerie A

2018-05-01

Educational measures of anxiety focus heavily on students' experiences with tests yet overlook other assessment contexts. In this research, two brief multiscale questionnaires were developed and validated to measure trait evaluation anxiety (MTEA-12) and state evaluation anxiety (MSEA-12) for use in various assessment contexts in non-clinical, educational settings. The research included a cross-sectional analysis of self-report data using authentic assessment settings in which evaluation anxiety was measured. Instruments were tested using a validation sample of 241 first-year university students in New Zealand. Scale development included component structures for state and trait scales based on existing theoretical frameworks. Analyses using confirmatory factor analysis and descriptive statistics indicate that the scales are reliable and structurally valid. Multivariate general linear modeling using subscales from the MTEA-12, MSEA-12, and student grades suggest adequate criterion-related validity. Initial predictive validity in which one relevant MTEA-12 factor explained between 21% and 54% of the variance in three MSEA-12 factors. Results document MTEA-12 and MSEA-12 as reliable measures of trait and state dimensions of evaluation anxiety for test and writing contexts. Initial estimates suggest the scales as having promising validity, and recommendations for further validation are outlined.

Methodology for Computational Fluid Dynamic Validation for Medical Use: Application to Intracranial Aneurysm.

PubMed

Paliwal, Nikhil; Damiano, Robert J; Varble, Nicole A; Tutino, Vincent M; Dou, Zhongwang; Siddiqui, Adnan H; Meng, Hui

2017-12-01

Computational fluid dynamics (CFD) is a promising tool to aid in clinical diagnoses of cardiovascular diseases. However, it uses assumptions that simplify the complexities of the real cardiovascular flow. Due to high-stakes in the clinical setting, it is critical to calculate the effect of these assumptions in the CFD simulation results. However, existing CFD validation approaches do not quantify error in the simulation results due to the CFD solver's modeling assumptions. Instead, they directly compare CFD simulation results against validation data. Thus, to quantify the accuracy of a CFD solver, we developed a validation methodology that calculates the CFD model error (arising from modeling assumptions). Our methodology identifies independent error sources in CFD and validation experiments, and calculates the model error by parsing out other sources of error inherent in simulation and experiments. To demonstrate the method, we simulated the flow field of a patient-specific intracranial aneurysm (IA) in the commercial CFD software star-ccm+. Particle image velocimetry (PIV) provided validation datasets for the flow field on two orthogonal planes. The average model error in the star-ccm+ solver was 5.63 ± 5.49% along the intersecting validation line of the orthogonal planes. Furthermore, we demonstrated that our validation method is superior to existing validation approaches by applying three representative existing validation techniques to our CFD and experimental dataset, and comparing the validation results. Our validation methodology offers a streamlined workflow to extract the "true" accuracy of a CFD solver.

Validation of the Vanderbilt Holistic Face Processing Test.

PubMed

Wang, Chao-Chih; Ross, David A; Gauthier, Isabel; Richler, Jennifer J

2016-01-01

The Vanderbilt Holistic Face Processing Test (VHPT-F) is a new measure of holistic face processing with better psychometric properties relative to prior measures developed for group studies (Richler et al., 2014). In fields where psychologists study individual differences, validation studies are commonplace and the concurrent validity of a new measure is established by comparing it to an older measure with established validity. We follow this approach and test whether the VHPT-F measures the same construct as the composite task, which is group-based measure at the center of the large literature on holistic face processing. In Experiment 1, we found a significant correlation between holistic processing measured in the VHPT-F and the composite task. Although this correlation was small, it was comparable to the correlation between holistic processing measured in the composite task with the same faces, but different target parts (top or bottom), which represents a reasonable upper limit for correlations between the composite task and another measure of holistic processing. These results confirm the validity of the VHPT-F by demonstrating shared variance with another measure of holistic processing based on the same operational definition. These results were replicated in Experiment 2, but only when the demographic profile of our sample matched that of Experiment 1.

Validation of the Vanderbilt Holistic Face Processing Test

PubMed Central

Wang, Chao-Chih; Ross, David A.; Gauthier, Isabel; Richler, Jennifer J.

2016-01-01

The Vanderbilt Holistic Face Processing Test (VHPT-F) is a new measure of holistic face processing with better psychometric properties relative to prior measures developed for group studies (Richler et al., 2014). In fields where psychologists study individual differences, validation studies are commonplace and the concurrent validity of a new measure is established by comparing it to an older measure with established validity. We follow this approach and test whether the VHPT-F measures the same construct as the composite task, which is group-based measure at the center of the large literature on holistic face processing. In Experiment 1, we found a significant correlation between holistic processing measured in the VHPT-F and the composite task. Although this correlation was small, it was comparable to the correlation between holistic processing measured in the composite task with the same faces, but different target parts (top or bottom), which represents a reasonable upper limit for correlations between the composite task and another measure of holistic processing. These results confirm the validity of the VHPT-F by demonstrating shared variance with another measure of holistic processing based on the same operational definition. These results were replicated in Experiment 2, but only when the demographic profile of our sample matched that of Experiment 1. PMID:27933014

Three atmospheric dispersion experiments involving oil fog plumes measured by lidar

NASA Technical Reports Server (NTRS)

Eberhard, W. L.; Mcnice, G. T.; Troxel, S. W.

1986-01-01

The Wave Propagation Lab. participated with the U.S. Environmental Protection Agency in a series of experiments with the goal of developing and validating dispersion models that perform substantially better that models currently available. The lidar systems deployed and the data processing procedures used in these experiments are briefly described. Highlights are presented of conclusions drawn thus far from the lidar data.

Interaction of Theory and Practice to Assess External Validity.

PubMed

Leviton, Laura C; Trujillo, Mathew D

2016-01-18

Variations in local context bedevil the assessment of external validity: the ability to generalize about effects of treatments. For evaluation, the challenges of assessing external validity are intimately tied to the translation and spread of evidence-based interventions. This makes external validity a question for decision makers, who need to determine whether to endorse, fund, or adopt interventions that were found to be effective and how to ensure high quality once they spread. To present the rationale for using theory to assess external validity and the value of more systematic interaction of theory and practice. We review advances in external validity, program theory, practitioner expertise, and local adaptation. Examples are provided for program theory, its adaptation to diverse contexts, and generalizing to contexts that have not yet been studied. The often critical role of practitioner experience is illustrated in these examples. Work is described that the Robert Wood Johnson Foundation is supporting to study treatment variation and context more systematically. Researchers and developers generally see a limited range of contexts in which the intervention is implemented. Individual practitioners see a different and often a wider range of contexts, albeit not a systematic sample. Organized and taken together, however, practitioner experiences can inform external validity by challenging the developers and researchers to consider a wider range of contexts. Researchers have developed a variety of ways to adapt interventions in light of such challenges. In systematic programs of inquiry, as opposed to individual studies, the problems of context can be better addressed. Evaluators have advocated an interaction of theory and practice for many years, but the process can be made more systematic and useful. Systematic interaction can set priorities for assessment of external validity by examining the prevalence and importance of context features and treatment variations. Practitioner interaction with researchers and developers can assist in sharpening program theory, reducing uncertainty about treatment variations that are consistent or inconsistent with the theory, inductively ruling out the ones that are harmful or irrelevant, and helping set priorities for more rigorous study of context and treatment variation. © The Author(s) 2016.

Modeling Combustion in Supersonic Flows

NASA Technical Reports Server (NTRS)

Drummond, J. Philip; Danehy, Paul M.; Bivolaru, Daniel; Gaffney, Richard L.; Tedder, Sarah A.; Cutler, Andrew D.

2007-01-01

This paper discusses the progress of work to model high-speed supersonic reacting flow. The purpose of the work is to improve the state of the art of CFD capabilities for predicting the flow in high-speed propulsion systems, particularly combustor flow-paths. The program has several components including the development of advanced algorithms and models for simulating engine flowpaths as well as a fundamental experimental and diagnostic development effort to support the formulation and validation of the mathematical models. The paper will provide details of current work on experiments that will provide data for the modeling efforts along with with the associated nonintrusive diagnostics used to collect the data from the experimental flowfield. Simulation of a recent experiment to partially validate the accuracy of a combustion code is also described.

Detection of tunnel excavation using fiber optic reflectometry: experimental validation

NASA Astrophysics Data System (ADS)

Linker, Raphael; Klar, Assaf

2013-06-01

Cross-border smuggling tunnels enable unmonitored movement of people and goods, and pose a severe threat to homeland security. In recent years, we have been working on the development of a system based on fiber- optic Brillouin time domain reflectometry (BOTDR) for detecting tunnel excavation. In two previous SPIE publications we have reported the initial development of the system as well as its validation using small-scale experiments. This paper reports, for the first time, results of full-scale experiments and discusses the system performance. The results confirm that distributed measurement of strain profiles in fiber cables buried at shallow depth enable detection of tunnel excavation, and by proper data processing, these measurements enable precise localization of the tunnel, as well as reasonable estimation of its depth.

Design process and preliminary psychometric study of a video game to detect cognitive impairment in senior adults.

PubMed

Valladares-Rodriguez, Sonia; Perez-Rodriguez, Roberto; Facal, David; Fernandez-Iglesias, Manuel J; Anido-Rifon, Luis; Mouriño-Garcia, Marcos

2017-01-01

Assessment of episodic memory has been traditionally used to evaluate potential cognitive impairments in senior adults. Typically, episodic memory evaluation is based on personal interviews and pen-and-paper tests. This article presents the design, development and a preliminary validation of a novel digital game to assess episodic memory intended to overcome the limitations of traditional methods, such as the cost of its administration, its intrusive character, the lack of early detection capabilities, the lack of ecological validity, the learning effect and the existence of confounding factors. Our proposal is based on the gamification of the California Verbal Learning Test (CVLT) and it has been designed to comply with the psychometric characteristics of reliability and validity. Two qualitative focus groups and a first pilot experiment were carried out to validate the proposal. A more ecological, non-intrusive and better administrable tool to perform cognitive assessment was developed. Initial evidence from the focus groups and pilot experiment confirmed the developed game's usability and offered promising results insofar its psychometric validity is concerned. Moreover, the potential of this game for the cognitive classification of senior adults was confirmed, and administration time is dramatically reduced with respect to pen-and-paper tests. Additional research is needed to improve the resolution of the game for the identification of specific cognitive impairments, as well as to achieve a complete validation of the psychometric properties of the digital game. Initial evidence show that serious games can be used as an instrument to assess the cognitive status of senior adults, and even to predict the onset of mild cognitive impairments or Alzheimer's disease.

Design process and preliminary psychometric study of a video game to detect cognitive impairment in senior adults

PubMed Central

Perez-Rodriguez, Roberto; Facal, David; Fernandez-Iglesias, Manuel J.; Anido-Rifon, Luis; Mouriño-Garcia, Marcos

2017-01-01

Introduction Assessment of episodic memory has been traditionally used to evaluate potential cognitive impairments in senior adults. Typically, episodic memory evaluation is based on personal interviews and pen-and-paper tests. This article presents the design, development and a preliminary validation of a novel digital game to assess episodic memory intended to overcome the limitations of traditional methods, such as the cost of its administration, its intrusive character, the lack of early detection capabilities, the lack of ecological validity, the learning effect and the existence of confounding factors. Materials and Methods Our proposal is based on the gamification of the California Verbal Learning Test (CVLT) and it has been designed to comply with the psychometric characteristics of reliability and validity. Two qualitative focus groups and a first pilot experiment were carried out to validate the proposal. Results A more ecological, non-intrusive and better administrable tool to perform cognitive assessment was developed. Initial evidence from the focus groups and pilot experiment confirmed the developed game’s usability and offered promising results insofar its psychometric validity is concerned. Moreover, the potential of this game for the cognitive classification of senior adults was confirmed, and administration time is dramatically reduced with respect to pen-and-paper tests. Limitations Additional research is needed to improve the resolution of the game for the identification of specific cognitive impairments, as well as to achieve a complete validation of the psychometric properties of the digital game. Conclusion Initial evidence show that serious games can be used as an instrument to assess the cognitive status of senior adults, and even to predict the onset of mild cognitive impairments or Alzheimer’s disease. PMID:28674661

Development and validation of the Bullying and Cyberbullying Scale for Adolescents: A multi-dimensional measurement model.

PubMed

Thomas, Hannah J; Scott, James G; Coates, Jason M; Connor, Jason P

2018-05-03

Intervention on adolescent bullying is reliant on valid and reliable measurement of victimization and perpetration experiences across different behavioural expressions. This study developed and validated a survey tool that integrates measurement of both traditional and cyber bullying to test a theoretically driven multi-dimensional model. Adolescents from 10 mainstream secondary schools completed a baseline and follow-up survey (N = 1,217; M age  = 14 years; 66.2% male). The Bullying and cyberbullying Scale for Adolescents (BCS-A) developed for this study comprised parallel victimization and perpetration subscales, each with 20 items. Additional measures of bullying (Olweus Global Bullying and the Forms of Bullying Scale [FBS]), as well as measures of internalizing and externalizing problems, school connectedness, social support, and personality, were used to further assess validity. Factor structure was determined, and then, the suitability of items was assessed according to the following criteria: (1) factor interpretability, (2) item correlations, (3) model parsimony, and (4) measurement equivalence across victimization and perpetration experiences. The final models comprised four factors: physical, verbal, relational, and cyber. The final scale was revised to two 13-item subscales. The BCS-A demonstrated acceptable concurrent and convergent validity (internalizing and externalizing problems, school connectedness, social support, and personality), as well as predictive validity over 6 months. The BCS-A has sound psychometric properties. This tool establishes measurement equivalence across types of involvement and behavioural forms common among adolescents. An improved measurement method could add greater rigour to the evaluation of intervention programmes and also enable interventions to be tailored to subscale profiles. © 2018 The British Psychological Society.

Development of the Military Women's Attitudes Toward Menstrual Suppression Scale: from construct definition to pilot testing.

PubMed

Trego, Lori L

2009-01-01

The Military Women's Attitudes Toward Menstrual Suppression scale (MWATMS) was created to measure attitudes toward menstrual suppression during deployment. The human health and social ecology theories were integrated to conceptualize an instrument that accounts for military-unique aspects of the environment on attitudes toward suppression. A three-step instrument development process was followed to develop the MWATMS. The instrument was pilot tested on a convenience sample of 206 military women with deployment experience. Reliability was tested with measures of internal consistency (alpha = .97); validity was tested with principal components analysis with varimax rotation. Four components accounted for 65% of variance: Benefits/Interest, Hygiene, Convenience, and Soldier/Stress. The pilot test of the MWATMS supported its reliability and validity. Further testing is warranted for validation of this instrument.

Measuring the Pros and Cons of What It Means to Be a Black Man: Development and Validation of the Black Men’s Experiences Scale (BMES)

PubMed Central

Bowleg, Lisa; English, Devin; del Rio-Gonzalez, Ana Maria; Burkholder, Gary J.; Teti, Michelle; Tschann, Jeanne M.

2015-01-01

Although extensive research documents that Black people in the U.S. frequently experience social discrimination, most of this research aggregates these experiences primarily or exclusively by race. Consequently, empirical gaps exist about the psychosocial costs and benefits of Black men’s experiences at the intersection of race and gender. Informed by intersectionality, a theoretical framework that highlights how multiple social identities intersect to reflect interlocking social-structural inequality, this study addresses these gaps with the qualitative development and quantitative test of the Black Men’s Experiences Scale (BMES). The BMES assesses Black men’s negative experiences with overt discrimination and microaggressions, as well their positive evaluations of what it means to be Black men. First, we conducted focus groups and individual interviews with Black men to develop the BMES. Next, we tested the BMES with 578 predominantly low-income urban Black men between the ages of 18 and 44. Exploratory factor analysis suggested a 12-item, 3-factor solution that explained 63.7% of the variance. We labeled the subscales: Overt Discrimination, Microaggressions, and Positives: Black Men. Confirmatory factor analysis supported the three-factor solution. As hypothesized, the BMES’s subscales correlated with measures of racial discrimination, depression, resilience, and social class at the neighborhood-level. Preliminary evidence suggests that the BMES is a reliable and valid measure of Black men’s experiences at the intersection of race and gender. PMID:27087786

Measuring the Pros and Cons of What It Means to Be a Black Man: Development and Validation of the Black Men's Experiences Scale (BMES).

PubMed

Bowleg, Lisa; English, Devin; Del Rio-Gonzalez, Ana Maria; Burkholder, Gary J; Teti, Michelle; Tschann, Jeanne M

2016-04-01

Although extensive research documents that Black people in the U.S. frequently experience social discrimination, most of this research aggregates these experiences primarily or exclusively by race. Consequently, empirical gaps exist about the psychosocial costs and benefits of Black men's experiences at the intersection of race and gender. Informed by intersectionality, a theoretical framework that highlights how multiple social identities intersect to reflect interlocking social-structural inequality, this study addresses these gaps with the qualitative development and quantitative test of the Black Men's Experiences Scale (BMES). The BMES assesses Black men's negative experiences with overt discrimination and microaggressions, as well their positive evaluations of what it means to be Black men. First, we conducted focus groups and individual interviews with Black men to develop the BMES. Next, we tested the BMES with 578 predominantly low-income urban Black men between the ages of 18 and 44. Exploratory factor analysis suggested a 12-item, 3-factor solution that explained 63.7% of the variance. We labeled the subscales: Overt Discrimination, Microaggressions, and Positives: Black Men . Confirmatory factor analysis supported the three-factor solution. As hypothesized, the BMES's subscales correlated with measures of racial discrimination, depression, resilience, and social class at the neighborhood-level. Preliminary evidence suggests that the BMES is a reliable and valid measure of Black men's experiences at the intersection of race and gender.

Statistical validation and an empirical model of hydrogen production enhancement found by utilizing passive flow disturbance in the steam-reformation process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Erickson, Paul A.; Liao, Chang-hsien

2007-11-15

A passive flow disturbance has been proven to enhance the conversion of fuel in a methanol-steam reformer. This study presents a statistical validation of the experiment based on a standard 2{sup k} factorial experiment design and the resulting empirical model of the enhanced hydrogen producing process. A factorial experiment design was used to statistically analyze the effects and interactions of various input factors in the experiment. Three input factors, including the number of flow disturbers, catalyst size, and reactant flow rate were investigated for their effects on the fuel conversion in the steam-reformation process. Based on the experimental results, anmore » empirical model was developed and further evaluated with an uncertainty analysis and interior point data. (author)« less

Validating Personal Well-Being Experiences at School: A Quantitative Examination of Secondary School Students

ERIC Educational Resources Information Center

Phan, Huy P.; Ngu, Bing H.

2015-01-01

Progress in education has involved, to a large extent, a focus on individuals' well-being experiences at school (ACU and Erebus International, 2008; Fraillon, 2004). This line of inquiry has produced extensive findings, highlighting the diverse coverage and scope of this psychosocial theoretical orientation. We recently developed a theoretical…

Improving STEM Program Quality in Out-of-School-Time: Tool Development and Validation

ERIC Educational Resources Information Center

Shah, Ashima Mathur; Wylie, Caroline; Gitomer, Drew; Noam, Gil

2018-01-01

In and out-of-school time (OST) experiences are viewed as complementary in contributing to students' interest, engagement, and performance in science, technology, engineering, and mathematics (STEM). While tools exist to measure quality in general afterschool settings and others to measure structured science classroom experiences, there is a need…

Creation of a novel simulator for minimally invasive neurosurgery: fusion of 3D printing and special effects.

PubMed

Weinstock, Peter; Rehder, Roberta; Prabhu, Sanjay P; Forbes, Peter W; Roussin, Christopher J; Cohen, Alan R

2017-07-01

OBJECTIVE Recent advances in optics and miniaturization have enabled the development of a growing number of minimally invasive procedures, yet innovative training methods for the use of these techniques remain lacking. Conventional teaching models, including cadavers and physical trainers as well as virtual reality platforms, are often expensive and ineffective. Newly developed 3D printing technologies can recreate patient-specific anatomy, but the stiffness of the materials limits fidelity to real-life surgical situations. Hollywood special effects techniques can create ultrarealistic features, including lifelike tactile properties, to enhance accuracy and effectiveness of the surgical models. The authors created a highly realistic model of a pediatric patient with hydrocephalus via a unique combination of 3D printing and special effects techniques and validated the use of this model in training neurosurgery fellows and residents to perform endoscopic third ventriculostomy (ETV), an effective minimally invasive method increasingly used in treating hydrocephalus. METHODS A full-scale reproduction of the head of a 14-year-old adolescent patient with hydrocephalus, including external physical details and internal neuroanatomy, was developed via a unique collaboration of neurosurgeons, simulation engineers, and a group of special effects experts. The model contains "plug-and-play" replaceable components for repetitive practice. The appearance of the training model (face validity) and the reproducibility of the ETV training procedure (content validity) were assessed by neurosurgery fellows and residents of different experience levels based on a 14-item Likert-like questionnaire. The usefulness of the training model for evaluating the performance of the trainees at different levels of experience (construct validity) was measured by blinded observers using the Objective Structured Assessment of Technical Skills (OSATS) scale for the performance of ETV. RESULTS A combination of 3D printing technology and casting processes led to the creation of realistic surgical models that include high-fidelity reproductions of the anatomical features of hydrocephalus and allow for the performance of ETV for training purposes. The models reproduced the pulsations of the basilar artery, ventricles, and cerebrospinal fluid (CSF), thus simulating the experience of performing ETV on an actual patient. The results of the 14-item questionnaire showed limited variability among participants' scores, and the neurosurgery fellows and residents gave the models consistently high ratings for face and content validity. The mean score for the content validity questions (4.88) was higher than the mean score for face validity (4.69) (p = 0.03). On construct validity scores, the blinded observers rated performance of fellows significantly higher than that of residents, indicating that the model provided a means to distinguish between novice and expert surgical skills. CONCLUSIONS A plug-and-play lifelike ETV training model was developed through a combination of 3D printing and special effects techniques, providing both anatomical and haptic accuracy. Such simulators offer opportunities to accelerate the development of expertise with respect to new and novel procedures as well as iterate new surgical approaches and innovations, thus allowing novice neurosurgeons to gain valuable experience in surgical techniques without exposing patients to risk of harm.

SEG Advances in Rotational Seismic Measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pierson, Robert; Laughlin, Darren; Brune, Bob

2016-10-17

Significant advancements in the development of sensors to enable rotational seismic measurements have been achieved. Prototypes are available now to support experiments that help validate the utility of rotational seismic measurements.

Successful validation of in vitro methods in toxicology by ZEBET, the National Centre for Alternatives in Germany at the BfR (Federal Institute for Risk Assessment).

PubMed

Spielmann, Horst; Grune, Barbara; Liebsch, Manfred; Seiler, Andrea; Vogel, Richard

2008-06-01

A short description of the history of the 3Rs concept is given, which was developed as the scientific concept to refine, reduce and replace animal experiments by Russel and Burch more than 40 years ago. In addition, the legal framework in Europe for developing alternatives to animal experiments is given and the current status of in vitro systems in pharmacology and toxicology is described including an update on metabolising systems. The decrease in experimental animal numbers during the past decade in Europe is illustrated by the situation in Germany and the contribution of international harmonisation of test guidelines on reducing animal numbers in regulatory testing is described. A review of the development of the principles of experimental validation is given and the 3T3 NRU in vitro phototoxicity test is used as an example for a successful validation study, which led to the acceptance of the first in vitro toxicity test for regulatory purposes by the OECD. Finally, the currently accepted alternative methods for standardisation and safety testing of drugs, biologicals and medical devices are summarised.

OECD-NEA Expert Group on Multi-Physics Experimental Data, Benchmarks and Validation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Valentine, Timothy; Rohatgi, Upendra S.

High-fidelity, multi-physics modeling and simulation (M&S) tools are being developed and utilized for a variety of applications in nuclear science and technology and show great promise in their abilities to reproduce observed phenomena for many applications. Even with the increasing fidelity and sophistication of coupled multi-physics M&S tools, the underpinning models and data still need to be validated against experiments that may require a more complex array of validation data because of the great breadth of the time, energy and spatial domains of the physical phenomena that are being simulated. The Expert Group on Multi-Physics Experimental Data, Benchmarks and Validationmore » (MPEBV) of the Nuclear Energy Agency (NEA) of the Organization for Economic Cooperation and Development (OECD) was formed to address the challenges with the validation of such tools. The work of the MPEBV expert group is shared among three task forces to fulfill its mandate and specific exercises are being developed to demonstrate validation principles for common industrial challenges. This paper describes the overall mission of the group, the specific objectives of the task forces, the linkages among the task forces, and the development of a validation exercise that focuses on a specific reactor challenge problem.« less

Design and Evaluation Process of a Personal and Motive-Based Competencies Questionnaire in Spanish-Speaking Contexts.

PubMed

Batista-Foguet, Joan; Sipahi-Dantas, Alaide; Guillén, Laura; Martínez Arias, Rosario; Serlavós, Ricard

2016-03-22

Most questionnaires used for managerial purposes have been developed in Anglo-Saxon countries and then adapted for other cultures. However, this process is controversial. This paper fills the gap for more culturally sensitive assessment instruments in the specific field of human resources while also addressing the methodological issues that scientists and practitioners face in the development of questionnaires. First, we present the development process of a Personal and Motive-based competencies questionnaire targeted to Spanish-speaking countries. Second, we address the validation process by guiding the reader through testing the questionnaire construct validity. We performed two studies: a first study with 274 experts and practitioners of competency development and a definitive study with 482 members of the general public. Our results support a model of nineteen competencies grouped into four higher-order factors. To assure valid construct comparisons we have tested the factorial invariance of gender and work experience. Subsequent analysis have found that women self-rate themselves significantly higher than men on only two of the nineteen competencies, empathy (p < .001) and service orientation (p < .05). The effect of work experience was significant in twelve competencies (p < .001), in which less experienced workers self-rate higher than experienced workers. Finally, we derive theoretical and practical implications.

Pediatric Quality of Life Enjoyment and Satisfaction Questionnaire (PQ-LES-Q): Reliability and Validity

ERIC Educational Resources Information Center

Endicott, Jean; Nee, John; Yang, Ruoyong; Wohlberg, Christopher

2006-01-01

Objective: The pediatric version of the Short Form of the Quality of Life Enjoyment and Satisfaction Questionnaire (PQ-LES-Q) was developed to aid in the assessment of an important aspect of life experience in children and adolescents. Method: The reliability and validity of the PQ-LES-Q was tested using data from a sample of 376 outpatient…

A user-targeted synthesis of the VALUE perfect predictor experiment

NASA Astrophysics Data System (ADS)

Maraun, Douglas; Widmann, Martin; Gutierrez, Jose; Kotlarski, Sven; Hertig, Elke; Wibig, Joanna; Rössler, Ole; Huth, Radan

2016-04-01

VALUE is an open European network to validate and compare downscaling methods for climate change research. A key deliverable of VALUE is the development of a systematic validation framework to enable the assessment and comparison of both dynamical and statistical downscaling methods. VALUE's main approach to validation is user-focused: starting from a specific user problem, a validation tree guides the selection of relevant validation indices and performance measures. We consider different aspects: (1) marginal aspects such as mean, variance and extremes; (2) temporal aspects such as spell length characteristics; (3) spatial aspects such as the de-correlation length of precipitation extremes; and multi-variate aspects such as the interplay of temperature and precipitation or scale-interactions. Several experiments have been designed to isolate specific points in the downscaling procedure where problems may occur. Experiment 1 (perfect predictors): what is the isolated downscaling skill? How do statistical and dynamical methods compare? How do methods perform at different spatial scales? Experiment 2 (Global climate model predictors): how is the overall representation of regional climate, including errors inherited from global climate models? Experiment 3 (pseudo reality): do methods fail in representing regional climate change? Here, we present a user-targeted synthesis of the results of the first VALUE experiment. In this experiment, downscaling methods are driven with ERA-Interim reanalysis data to eliminate global climate model errors, over the period 1979-2008. As reference data we use, depending on the question addressed, (1) observations from 86 meteorological stations distributed across Europe; (2) gridded observations at the corresponding 86 locations or (3) gridded spatially extended observations for selected European regions. With more than 40 contributing methods, this study is the most comprehensive downscaling inter-comparison project so far. The results clearly indicate that for several aspects, the downscaling skill varies considerably between different methods. For specific purposes, some methods can therefore clearly be excluded.

Development of a questionnaire for assessing the childbirth experience (QACE).

PubMed

Carquillat, Pierre; Vendittelli, Françoise; Perneger, Thomas; Guittier, Marie-Julia

2017-08-30

Due to its potential impact on women's psychological health, assessing perceptions of their childbirth experience is important. The aim of this study was to develop a multidimensional self-reporting questionnaire to evaluate the childbirth experience. Factors influencing the childbirth experience were identified from a literature review and the results of a previous qualitative study. A total of 25 items were combined from existing instruments or were created de novo. A draft version was pilot tested for face validity with 30 women and submitted for evaluation of its construct validity to 477 primiparous women at one-month post-partum. The recruitment took place in two obstetric clinics from Swiss and French university hospitals. To evaluate the content validity, we compared item responses to general childbirth experience assessments on a numeric, 0 to 10 rating scale. We dichotomized two group assessment scores: "0 to 7" and "8 to 10". We performed an exploratory factor analysis to identify underlying dimensions. In total, 291 women completed the questionnaire (response rate = 61%). The responses to 22 items were statistically significant between the 0 to 7 and 8 to 10 groups for the general childbirth experience assessments. An exploratory factor analysis yielded four sub-scales, which were labelled "relationship with staff" (4 items), "emotional status" (3 items), "first moments with the new born," (3 items) and "feelings at one month postpartum" (3 items). All 4 scales had satisfactory internal consistency levels (alpha coefficients from 0.70 to 0.85). The full 25-item version can be used to analyse each item by itself, and the short 4-dimension version can be scored to summarize the general assessment of the childbirth experience. The Questionnaire for Assessing the Childbirth Experience (QACE) could be useful as a screening instrument to identify women with negative childbirth experiences. It can be used as both a research instrument in its short version and a questionnaire for use in clinical practice in its full version.

Arabic cross cultural adaptation and validation of the National Institutes of Health Stroke Scale.

PubMed

Hussein, Haitham M; Abdel Moneim, Amr; Emara, Tamer; Abd-Elhamid, Yousry A; Salem, Haitham H; Abd-Allah, Foad; Farrag, Mohammad A; Tork, M Amir; Shalash, Ali S; Ezz El Dein, Khaled H; Osman, Gamaleldin; Georgy, Shady S; Ghali, Peter G; Lyden, Patrick D; Moustafa, Ramez R

2015-10-15

The National Institutes of Health Stroke Scale (NIHSS), the most commonly used tool to quantify neurological deficit in acute stroke, was initially developed in English. We present our experience in developing and validating an Arabic version of the NIHSS (arNIHSS). In 6months, 137 patients were recruited (mean age±standard deviation 62±12years; 48 women). For interrater agreement, weighted kappa value ranged from 0.36 to 0.66 and intraclass correlation coefficient (ICC) for the whole scale was excellent at 0.95 (95% confidence interval [CI] 0.94-0.97). For intrarater agreement, weighted kappa ranged from 0.52 to 1.0 and the ICC was 0.94 (95% CI 0.87-0.98). The construct validity of the arNIHSS is demonstrated by its correlation with the DWI-ASPECT and the 3months mRS score (Spearman correlation -0.46 and 0.58 respectively; P<0.001 for both). We developed and validated a culturally adapted Arabic version of the NIHSS. Further validation in other Arab countries is recommended. Copyright © 2015 Elsevier B.V. All rights reserved.

[Perception scales of validated food insecurity: the experience of the countries in Latin America and the Caribbean].

PubMed

Sperandio, Naiara; Morais, Dayane de Castro; Priore, Silvia Eloiza

2018-02-01

The scope of this systematic review was to compare the food insecurity scales validated and used in the countries in Latin America and the Caribbean, and analyze the methods used in validation studies. A search was conducted in the Lilacs, SciELO and Medline electronic databases. The publications were pre-selected by titles and abstracts, and subsequently by a full reading. Of the 16,325 studies reviewed, 14 were selected. Twelve validated scales were identified for the following countries: Venezuela, Brazil, Colombia, Bolivia, Ecuador, Costa Rica, Mexico, Haiti, the Dominican Republic, Argentina and Guatemala. Besides these, there is the Latin American and Caribbean scale, the scope of which is regional. The scales ranged from the standard reference used, number of questions and diagnosis of insecurity. The methods used by the studies for internal validation were calculation of Cronbach's alpha and the Rasch model; for external validation the authors calculated association and /or correlation with socioeconomic and food consumption variables. The successful experience of Latin America and the Caribbean in the development of national and regional scales can be an example for other countries that do not have this important indicator capable of measuring the phenomenon of food insecurity.

Characterization of Aluminum Honeycomb and Experimentation for Model Development and Validation, Volume I: Discovery and Characterization Experiments for High-Density Aluminum Honeycomb

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, Wei-Yang; Korellis, John S.; Lee, Kenneth L.

2006-08-01

Honeycomb is a structure that consists of two-dimensional regular arrays of open cells. High-density aluminum honeycomb has been used in weapon assemblies to mitigate shock and protect payload because of its excellent crush properties. In order to use honeycomb efficiently and to certify the payload is protected by the honeycomb under various loading conditions, a validated honeycomb crush model is required and the mechanical properties of the honeycombs need to be fully characterized. Volume I of this report documents an experimental study of the crush behavior of high-density honeycombs. Two sets of honeycombs were included in this investigation: commercial grademore » for initial exploratory experiments, and weapon grade, which satisfied B61 specifications. This investigation also includes developing proper experimental methods for crush characterization, conducting discovery experiments to explore crush behaviors for model improvement, and identifying experimental and material uncertainties.« less

Integrated control and display research for transition and vertical flight on the NASA V/STOL Research Aircraft (VSRA)

NASA Technical Reports Server (NTRS)

Foster, John D.; Moralez, Ernesto, III; Franklin, James A.; Schroeder, Jeffery A.

1987-01-01

Results of a substantial body of ground-based simulation experiments indicate that a high degree of precision of operation for recovery aboard small ships in heavy seas and low visibility with acceptable levels of effort by the pilot can be achieved by integrating the aircraft flight and propulsion controls. The availability of digital fly-by-wire controls makes it feasible to implement an integrated control design to achieve and demonstrate in flight the operational benefits promised by the simulation experience. It remains to validate these systems concepts in flight to establish their value for advanced short takeoff vertical landing (STOVL) aircraft designs. This paper summarizes analytical studies and simulation experiments which provide a basis for the flight research program that will develop and validate critical technologies for advanced STOVL aircraft through the development and evaluation of advanced, integrated control and display concepts, and lays out the plan for the flight program that will be conducted on NASA's V/STOL Research Aircraft (VSRA).

Construct validity of individual and summary performance metrics associated with a computer-based laparoscopic simulator.

PubMed

Rivard, Justin D; Vergis, Ashley S; Unger, Bertram J; Hardy, Krista M; Andrew, Chris G; Gillman, Lawrence M; Park, Jason

2014-06-01

Computer-based surgical simulators capture a multitude of metrics based on different aspects of performance, such as speed, accuracy, and movement efficiency. However, without rigorous assessment, it may be unclear whether all, some, or none of these metrics actually reflect technical skill, which can compromise educational efforts on these simulators. We assessed the construct validity of individual performance metrics on the LapVR simulator (Immersion Medical, San Jose, CA, USA) and used these data to create task-specific summary metrics. Medical students with no prior laparoscopic experience (novices, N = 12), junior surgical residents with some laparoscopic experience (intermediates, N = 12), and experienced surgeons (experts, N = 11) all completed three repetitions of four LapVR simulator tasks. The tasks included three basic skills (peg transfer, cutting, clipping) and one procedural skill (adhesiolysis). We selected 36 individual metrics on the four tasks that assessed six different aspects of performance, including speed, motion path length, respect for tissue, accuracy, task-specific errors, and successful task completion. Four of seven individual metrics assessed for peg transfer, six of ten metrics for cutting, four of nine metrics for clipping, and three of ten metrics for adhesiolysis discriminated between experience levels. Time and motion path length were significant on all four tasks. We used the validated individual metrics to create summary equations for each task, which successfully distinguished between the different experience levels. Educators should maintain some skepticism when reviewing the plethora of metrics captured by computer-based simulators, as some but not all are valid. We showed the construct validity of a limited number of individual metrics and developed summary metrics for the LapVR. The summary metrics provide a succinct way of assessing skill with a single metric for each task, but require further validation.

Development and psychometric testing of the rural pregnancy experience scale (RPES).

PubMed

Kornelsen, Jude; Stoll, Kathrin; Grzybowski, Stefan

2011-01-01

Rural pregnant woman who lack local access to maternity care due to their remote living circumstances may experience stress and anxiety related to pregnancy and parturition. The Rural Pregnancy Experience Scale (RPES) was designed to assess the unique worry and concerns reflective of the stress and anxiety of rural pregnant women related to pregnancy and parturition. The items of the scale were designed based on the results of a qualitative study of the experiences of pregnant rural women, thereby building a priori content validity into the measure. The relevancy content validity index (CVI) for this instrument was 1.0 and the clarity CVI was .91, as rated by maternity care specialists. A field test of the RPES with 187 pregnant rural women from British Columbia indicated that it had two factors: financial worries and worries/concerns about maternity care services, which were consistent with the conceptual base of the tool. Cronbach's alpha for the total RPES was .91; for the financial worries subscale and the worries/concerns about maternity care services subscale, alpha were .89 and .88, respectively. Construct validity was supported by significant correlations between the total scores of the RPES and the Depression Anxiety Stress Scales (DASS [r =.39, p < .01]), and subscale scores on the RPES were significantly correlated and converged with the depression, anxiety, and stress subscales of the DASS supporting convergent validity (correlations ranged between .20; p < .05 and .43; p < .01). Construct validity was also supported by findings that the level of access and availability of maternity care services were significantly associated with RPES scores. It was concluded that the RPES is a reliable and valid measure of worries and concerns reflective of rural pregnant women's stress and anxiety related to pregnancy and parturition.

The development and initial validation of a questionnaire to measure help-seeking behaviour in patients with new onset rheumatoid arthritis.

PubMed

Stack, Rebecca J; Mallen, Christian D; Deighton, Chris; Kiely, Patrick; Shaw, Karen L; Booth, Alison; Kumar, Kanta; Thomas, Susan; Rowan, Ian; Horne, Rob; Nightingale, Peter; Herron-Marx, Sandy; Jinks, Clare; Raza, Karim

2015-12-01

Early treatment for rheumatoid arthritis (RA) is vital. However, people often delay in seeking help at symptom onset. An assessment of the reasons behind patient delay is necessary to develop interventions to promote rapid consultation. Using a mixed methods design, we aimed to develop and test a questionnaire to assess the barriers to help seeking at RA onset. Questionnaire items were extracted from previous qualitative studies. Fifteen people with a lived experience of arthritis participated in focus groups to enhance the questionnaire's face validity. The questionnaire was also reviewed by groups of multidisciplinary health-care professionals. A test-retest survey of 41 patients with newly presenting RA or unclassified arthritis assessed the questionnaire items' intraclass correlations. During focus groups, participants rephrased questions, added questions and deleted items not relevant to the questionnaire's aims. Participants organized items into themes: early symptom experience, initial reactions to symptoms, self-management behaviours, causal beliefs, involvement of significant others, pre-diagnosis knowledge about RA, direct barriers to seeking help and relationship with GP. The test-retest survey identified seven items (out of 79) with low intraclass correlations which were removed from the final questionnaire. The involvement of people with a lived experience of arthritis and multidisciplinary health-care professionals in the preliminary validation of the DELAY (delays in evaluating arthritis early) questionnaire has enriched its development. Preliminary assessment established its reliability. The DELAY questionnaire provides a tool for researchers to evaluate individual, cultural and health service barriers to help-seeking behaviour at RA onset. © 2014 John Wiley & Sons Ltd.

Voice to Voice: Developing In-Service Teachers' Personal, Collaborative, and Public Voices.

ERIC Educational Resources Information Center

Thurber, Frances; Zimmerman, Enid

1997-01-01

Describes a model for inservice education that begins with an interchange of teachers' voices with those of the students in an interactive dialog. The exchange allows them to develop their private voices through self-reflection and validation of their own experiences. (JOW)

Considerations regarding the validation of chromatographic mass spectrometric methods for the quantification of endogenous substances in forensics.

PubMed

Hess, Cornelius; Sydow, Konrad; Kueting, Theresa; Kraemer, Michael; Maas, Alexandra

2018-02-01

The requirement for correct evaluation of forensic toxicological results in daily routine work and scientific studies is reliable analytical data based on validated methods. Validation of a method gives the analyst tools to estimate the efficacy and reliability of the analytical method. Without validation, data might be contested in court and lead to unjustified legal consequences for a defendant. Therefore, new analytical methods to be used in forensic toxicology require careful method development and validation of the final method. Until now, there are no publications on the validation of chromatographic mass spectrometric methods for the detection of endogenous substances although endogenous analytes can be important in Forensic Toxicology (alcohol consumption marker, congener alcohols, gamma hydroxy butyric acid, human insulin and C-peptide, creatinine, postmortal clinical parameters). For these analytes, conventional validation instructions cannot be followed completely. In this paper, important practical considerations in analytical method validation for endogenous substances will be discussed which may be used as guidance for scientists wishing to develop and validate analytical methods for analytes produced naturally in the human body. Especially the validation parameters calibration model, analytical limits, accuracy (bias and precision) and matrix effects and recovery have to be approached differently. Highest attention should be paid to selectivity experiments. Copyright © 2017 Elsevier B.V. All rights reserved.

Development and initial validation of the assessment of caregiver experience with neuromuscular disease.

PubMed

Matsumoto, Hiroko; Clayton-Krasinski, Debora A; Klinge, Stephen A; Gomez, Jaime A; Booker, Whitney A; Hyman, Joshua E; Roye, David P; Vitale, Michael G

2011-01-01

Orthopaedic intervention can have a wide range of functional and psychosocial effects on children with neuromuscular disease (NMD). In the multihandicapped child (Gross Motor Classification System IV/V), functional status, pain, psychosocial function, and health-related quality of life also have effects on the families of these child. The purpose of this study is to report the development and initial validation of an outcomes instrument specifically designed to assess the caregiver impact experienced by parents raising severely affected NMD children: the Assessment of Caregiver Experience with Neuromuscular Disease (ACEND). In the first part of this prospective study, 61 children with NMD and their parents were administered a range of earlier validated pediatric health measures. A framework technique was used to select the most appropriate and relevant subset of questions from this large set. Sensitivity analyses guided the development of a master question list measuring caregiver impact, excluding items with low relevance, and modifying unclear questions. In the second part of the study, the ACEND was administered to the caregivers of 46 children with moderate-to-severe NMD. Statistical analyses were conducted to determine validity of the instrument. The resulting ACEND instrument included 2 domains, 7 subdomains, and 41 items. Domain 1, examining physical impact, includes 4 subdomains: feeding/grooming/dressing (6 items), sitting/play (5 items), transfers (5 items), and mobility (7 items). Domain 2, which examines general caregiver impact, included 3 subdomains: time (4 items), emotion (9 items), and finance (5 items). Mean overall relevance rating was 6.21 ± 0.37 and clarity rating was 6.68 ± 0.52 (scale 0 to 7). Multiple floor effects in patients with GMFCS V and ceiling effects in patients with GMFCS III were identified almost exclusively in motor-based items. Virtually no floor or ceiling effects were identified in the time, emotion or finance domains across GMFCS level. The initial validation demonstrated that ACEND is a valid, disease-specific measure to quantify experience on caregivers of children with NMD. Larger groups of patients across NMD disease type are currently being tested to strengthen validity findings. Additionally, the ACEND is now being administered before and after orthopaedic interventions to determine responsiveness, which is critical to health outcomes research. LEVEL OF EVIDENCE/RELEVANCE: IIc.

Fundamental arthroscopic skill differentiation with virtual reality simulation.

PubMed

Rose, Kelsey; Pedowitz, Robert

2015-02-01

The purpose of this study was to investigate the use and validity of virtual reality modules as part of the educational approach to mastering arthroscopy in a safe environment by assessing the ability to distinguish between experience levels. Additionally, the study aimed to evaluate whether experts have greater ambidexterity than do novices. Three virtual reality modules (Swemac/Augmented Reality Systems, Linkoping, Sweden) were created to test fundamental arthroscopic skills. Thirty participants-10 experts consisting of faculty, 10 intermediate participants consisting of orthopaedic residents, and 10 novices consisting of medical students-performed each exercise. Steady and Telescope was designed to train centering and image stability. Steady and Probe was designed to train basic triangulation. Track and Moving Target was designed to train coordinated motions of arthroscope and probe. Metrics reflecting speed, accuracy, and efficiency of motion were used to measure construct validity. Steady and Probe and Track a Moving Target both exhibited construct validity, with better performance by experts and intermediate participants than by novices (P < .05), whereas Steady and Telescope did not show validity. There was an overall trend toward better ambidexterity as a function of greater surgical experience, with experts consistently more proficient than novices throughout all 3 modules. This study represents a new way to assess basic arthroscopy skills using virtual reality modules developed through task deconstruction. Participants with the most arthroscopic experience performed better and were more consistent than novices on all 3 virtual reality modules. Greater arthroscopic experience correlates with more symmetry of ambidextrous performance. However, further adjustment of the modules may better simulate fundamental arthroscopic skills and discriminate between experience levels. Arthroscopy training is a critical element of orthopaedic surgery resident training. Developing techniques to safely and effectively train these skills is critical for patient safety and resident education. Copyright © 2015 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Validation and Cross-Cultural Adaptation of a Chinese Version of the Emotional and Social Dysfunction Questionnaire in Stroke Patients.

PubMed

Huang, Hui-Chuan; Shyu, Meei-Ling; Lin, Mei-Feng; Hu, Chaur-Jong; Chang, Chien-Hung; Lee, Hsin-Chien; Chi, Nai-Fang; Chang, Hsiu-Ju

2017-12-01

The objectives of this study were to develop a cross-cultural Chinese version of the Emotional and Social Dysfunction Questionnaire (ESDQ-C) and test its validity and reliability among Chinese-speaking stroke patients. Various methods were used to develop the ESDQ-C. A cross-sectional study was used to examine the validity and reliability of the developed questionnaire, which consists of 28 items belonging to six factors, anger, helplessness, emotional dyscontrol, indifference, inertia and fatigue, and euphoria. Satisfactory convergence and known-group validities were confirmed by significant correlations of the ESDQ-C with the Profile of Mood States-Short Form ( p < .05) and with the Hospital Anxiety and Depression Scale ( p < .05). The internal consistency was represented by Cronbach's alpha, which was .96 and .79 to .92 for the entire scale and subscales, respectively. Appropriate application of the ESDQ-C will be helpful to identify critical adjustment-related types of distress and patients who experience difficulty coping with such distress.

Validating the BISON fuel performance code to integral LWR experiments

DOE PAGES

Williamson, R. L.; Gamble, K. A.; Perez, D. M.; ...

2016-03-24

BISON is a modern finite element-based nuclear fuel performance code that has been under development at the Idaho National Laboratory (INL) since 2009. The code is applicable to both steady and transient fuel behavior and has been used to analyze a variety of fuel forms in 1D spherical, 2D axisymmetric, or 3D geometries. Code validation is underway and is the subject of this study. A brief overview of BISON’s computational framework, governing equations, and general material and behavioral models is provided. BISON code and solution verification procedures are described, followed by a summary of the experimental data used to datemore » for validation of Light Water Reactor (LWR) fuel. Validation comparisons focus on fuel centerline temperature, fission gas release, and rod diameter both before and following fuel-clad mechanical contact. Comparisons for 35 LWR rods are consolidated to provide an overall view of how the code is predicting physical behavior, with a few select validation cases discussed in greater detail. Our results demonstrate that 1) fuel centerline temperature comparisons through all phases of fuel life are very reasonable with deviations between predictions and experimental data within ±10% for early life through high burnup fuel and only slightly out of these bounds for power ramp experiments, 2) accuracy in predicting fission gas release appears to be consistent with state-of-the-art modeling and with the involved uncertainties and 3) comparison of rod diameter results indicates a tendency to overpredict clad diameter reduction early in life, when clad creepdown dominates, and more significantly overpredict the diameter increase late in life, when fuel expansion controls the mechanical response. In the initial rod diameter comparisons they were unsatisfactory and have lead to consideration of additional separate effects experiments to better understand and predict clad and fuel mechanical behavior. Results from this study are being used to define priorities for ongoing code development and validation activities.« less

The Outpatient Experience Questionnaire of comprehensive public hospital in China: development, validity and reliability.

PubMed

Hu, Yinhuan; Zhang, Zixia; Xie, Jinzhu; Wang, Guanping

2017-02-01

The objective of this study is to describe the development of the Outpatient Experience Questionnaire (OPEQ) and to assess the validity and reliability of the scale. Literature review, patient interviews, Delphi method and Cross-sectional validation survey. Six comprehensive public hospitals in China. The survey was carried out on a sample of 600 outpatients. Acceptability of the questionnaire was assessed according to the overall response rate, item non-response rate and the average completion time. Correlation coefficients and confirmatory factor analysis were used to test construct validity. Delphi method was used to assess the content validity of the questionnaire. Cronbach's coefficient alpha and split-half reliability coefficient were used to estimate the internal reliability of the questionnaire. The overall response rate was 97.2% and the item non-response rate ranged from 0% to 0.3%. The mean completion time was 6 min. The Spearman correlations of item-total score ranged from 0.466 to 0.765. The results of confirmatory factor analysis showed that all items had factor loadings above 0.40 and the dimension intercorrelation ranged from 0.449 to 0.773, the goodness of fit of the questionnaire was reasonable. The overall authority grade of expert consultation was 0.80 and Kendall's coefficient of concordance W was 0.186. The Cronbach's coefficients alpha of six dimensions ranged from 0.708 to 0.895, the split-half reliability coefficient (Spearman-Brown coefficient) was 0.969. The OPEQ is a promising instrument covering the most important aspects which influence outpatient experiences of comprehensive public hospital in China. It has good evidence for acceptability, validity and reliability. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

Patient experiences questionnaire for interdisciplinary treatment for substance dependence (PEQ-ITSD): reliability and validity following a national survey in Norway.

PubMed

Haugum, Mona; Iversen, Hilde Hestad; Bjertnaes, Oyvind; Lindahl, Anne Karin

2017-02-20

Patient experiences are an important aspect of health care quality, but there is a lack of validated instruments for their measurement in the substance dependence literature. A new questionnaire to measure inpatients' experiences of interdisciplinary treatment for substance dependence has been developed in Norway. The aim of this study was to psychometrically test the new questionnaire, using data from a national survey in 2013. The questionnaire was developed based on a literature review, qualitative interviews with patients, expert group discussions and pretesting. Data were collected in a national survey covering all residential facilities with inpatients in treatment for substance dependence in 2013. Data quality and psychometric properties were assessed, including ceiling effects, item missing, exploratory factor analysis, and tests of internal consistency reliability, test-retest reliability and construct validity. The sample included 978 inpatients present at 98 residential institutions. After correcting for excluded patients (n = 175), the response rate was 91.4%. 28 out of 33 items had less than 20.5% of missing data or replies in the "not applicable" category. All but one item met the ceiling effect criterion of less than 50.0% of the responses in the most favorable category. Exploratory factor analysis resulted in three scales: "treatment and personnel", "milieu" and "outcome". All scales showed satisfactory internal consistency reliability (Cronbach's alpha ranged from 0.75-0.91) and test-retest reliability (ICC ranged from 0.82-0.85). 17 of 18 significant associations between single variables and the scales supported construct validity of the PEQ-ITSD. The content validity of the PEQ-ITSD was secured by a literature review, consultations with an expert group and qualitative interviews with patients. The PEQ-ITSD was used in a national survey in Norway in 2013 and psychometric testing showed that the instrument had satisfactory internal consistency reliability and construct validity.

Satisfaction of Middle School Lunch Program Participants and Non-Participants with the School Lunch Experience

ERIC Educational Resources Information Center

Smith, Stephanie; Cunningham-Sabo, Leslie; Auld, Garry

2015-01-01

Purpose/Objectives: The purpose of this study was to determine middle school students' satisfaction with the school lunch experience, using two validated surveys; the Middle/Junior High School Student Participation Survey and the Middle/Junior High School Student Non-Participation Survey, both developed by the National Food Service Management…

Relationship between a solar drying model of red pepper and the kinetics of pure water evaporation (2)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Passamai, V.; Saravia, L.

1997-05-01

In part one, a simple drying model of red pepper related to water evaporation was developed. In this second part the drying model is applied by means of related experiments. Both laboratory and open air drying experiments were carried out to validate the model and simulation results are presented.

A Comprehensive Validation Approach Using The RAVEN Code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alfonsi, Andrea; Rabiti, Cristian; Cogliati, Joshua J

2015-06-01

The RAVEN computer code , developed at the Idaho National Laboratory, is a generic software framework to perform parametric and probabilistic analysis based on the response of complex system codes. RAVEN is a multi-purpose probabilistic and uncertainty quantification platform, capable to communicate with any system code. A natural extension of the RAVEN capabilities is the imple- mentation of an integrated validation methodology, involving several different metrics, that represent an evolution of the methods currently used in the field. The state-of-art vali- dation approaches use neither exploration of the input space through sampling strategies, nor a comprehensive variety of metrics neededmore » to interpret the code responses, with respect experimental data. The RAVEN code allows to address both these lacks. In the following sections, the employed methodology, and its application to the newer developed thermal-hydraulic code RELAP-7, is reported.The validation approach has been applied on an integral effect experiment, representing natu- ral circulation, based on the activities performed by EG&G Idaho. Four different experiment configurations have been considered and nodalized.« less

Validation and scaling of soil moisture in a semi-arid environment: SMAP Validation Experiment 2015 (SMAPVEX15)

USDA-ARS?s Scientific Manuscript database

The NASA SMAP (Soil Moisture Active Passive) mission conducted the SMAP Validation Experiment 2015 (SMAPVEX15) in order to support the calibration and validation activities of SMAP soil moisture data product.The main goals of the experiment were to address issues regarding the spatial disaggregation...

Development and examination of the psychometric properties of the Learning Experience Scale in nursing.

PubMed

Takase, Miyuki; Imai, Takiko; Uemura, Chizuru

2016-06-01

This paper examines the psychometric properties of the Learning Experience Scale. A survey method was used to collect data from a total of 502 nurses. Data were analyzed by factor analysis and the known-groups technique to examine the construct validity of the scale. In addition, internal consistency was evaluated by Cronbach's alpha, and stability was examined by test-retest correlation. Factor analysis showed that the Learning Experience Scale consisted of five factors: learning from practice, others, training, feedback, and reflection. The scale also had the power to discriminate between nurses with high and low levels of nursing competence. The internal consistency and the stability of the scale were also acceptable. The Learning Experience Scale is a valid and reliable instrument, and helps organizations to effectively design learning interventions for nurses. © 2015 Wiley Publishing Asia Pty Ltd.

Integrated multiscale biomaterials experiment and modelling: a perspective

PubMed Central

Buehler, Markus J.; Genin, Guy M.

2016-01-01

Advances in multiscale models and computational power have enabled a broad toolset to predict how molecules, cells, tissues and organs behave and develop. A key theme in biological systems is the emergence of macroscale behaviour from collective behaviours across a range of length and timescales, and a key element of these models is therefore hierarchical simulation. However, this predictive capacity has far outstripped our ability to validate predictions experimentally, particularly when multiple hierarchical levels are involved. The state of the art represents careful integration of multiscale experiment and modelling, and yields not only validation, but also insights into deformation and relaxation mechanisms across scales. We present here a sampling of key results that highlight both challenges and opportunities for integrated multiscale experiment and modelling in biological systems. PMID:28981126

ALHAT System Validation

NASA Technical Reports Server (NTRS)

Brady, Tye; Bailey, Erik; Crain, Timothy; Paschall, Stephen

2011-01-01

NASA has embarked on a multiyear technology development effort to develop a safe and precise lunar landing capability. The Autonomous Landing and Hazard Avoidance Technology (ALHAT) Project is investigating a range of landing hazard detection methods while developing a hazard avoidance capability to best field test the proper set of relevant autonomous GNC technologies. Ultimately, the advancement of these technologies through the ALHAT Project will provide an ALHAT System capable of enabling next generation lunar lander vehicles to globally land precisely and safely regardless of lighting condition. This paper provides an overview of the ALHAT System and describes recent validation experiments that have advanced the highly capable GNC architecture.

Development and Validation of a Supersonic Helium-Air Coannular Jet Facility

NASA Technical Reports Server (NTRS)

Carty, Atherton A.; Cutler, Andrew D.

1999-01-01

Data are acquired in a simple coannular He/air supersonic jet suitable for validation of CFD (Computational Fluid Dynamics) codes for high speed propulsion. Helium is employed as a non-reacting hydrogen fuel simulant, constituting the core of the coannular flow while the coflow is composed of air. The mixing layer interface between the two flows in the near field and the plume region which develops further downstream constitute the primary regions of interest, similar to those present in all hypersonic air breathing propulsion systems. A computational code has been implemented from the experiment's inception, serving as a tool for model design during the development phase.

Development and Validation of High Performance Liquid Chromatography Method for Determination Atorvastatin in Tablet

NASA Astrophysics Data System (ADS)

Yugatama, A.; Rohmani, S.; Dewangga, A.

2018-03-01

Atorvastatin is the primary choice for dyslipidemia treatment. Due to patent expiration of atorvastatin, the pharmaceutical industry makes copy of the drug. Therefore, the development methods for tablet quality tests involving atorvastatin concentration on tablets needs to be performed. The purpose of this research was to develop and validate the simple atorvastatin tablet analytical method by HPLC. HPLC system used in this experiment consisted of column Cosmosil C18 (150 x 4,6 mm, 5 µm) as the stationary reverse phase chomatography, a mixture of methanol-water at pH 3 (80:20 v/v) as the mobile phase, flow rate of 1 mL/min, and UV detector at wavelength of 245 nm. Validation methods were including: selectivity, linearity, accuracy, precision, limit of detection (LOD), and limit of quantitation (LOQ). The results of this study indicate that the developed method had good validation including selectivity, linearity, accuracy, precision, LOD, and LOQ for analysis of atorvastatin tablet content. LOD and LOQ were 0.2 and 0.7 ng/mL, and the linearity range were 20 - 120 ng/mL.

[Translation and validation in French of the First-Time Father Questionnaire].

PubMed

Capponi, I; Carquillat, P; Premberg, Å; Vendittelli, F; Guittier, M-J

2016-09-01

For fathers, being present at a birth for the first time is not an insignificant event. Witnessing suffering can cause feelings of loneliness and powerlessness, which may be associated with postnatal problems such as depression. However, without a confirmed French-language tool concerning the experience of childbirth for fathers, we are limited in our ability to develop our understanding of their experiences and establish links between these experiences and their distress (anxiety, depression, etc.), or to develop appropriate methods of support. Our objective has been to translate and validate the Swedish "First-Time Father Questionnaire" with a French-speaking sample. The tool was translated using a translation/backtranslation process (using two independent agencies, with a pre-test on 30 new fathers as well as exchanges with the Swedish authors). The French version was then tested with 154 new fathers at 1 month post-partum. Factorial analysis followed by multi-trait analysis and variance analyses were conducted, with subgroups contrasted according to the mode of delivery. The factorial structure is satisfactory, retaining 19 items and reproducing 54.12% of variance. Professional support, worry, and prenatal preparation constitute the 3 dimensions of this. Internal consistency, homogeneity, and the discriminating capacity of the questionnaire are good. Validation of the questionnaire shows good metrological qualities. It can therefore be used in the perinatal field to evaluate the childbirth experience for first-time fathers. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Military Families' Perceptions of Neighborhood Characteristics Affecting Reintegration: Development of an Aggregate Measure.

PubMed

Beehler, Sarah; Ahern, Jennifer; Balmer, Brandi; Kuhlman, Jennifer

2017-01-01

This pilot study evaluated the validity and reliability of an Experience of Neighborhood (EON) measure developed to assess neighborhood characteristics that shape reintegration opportunities for returning service members and their families. A total of 91 post-9/11 veterans and spouses completed a survey administered at the Minnesota State Fair. Participants self-reported on their reintegration status (veterans), social functioning (spouses), social support, and mental health. EON factor structure, internal consistency reliability, and validity (discriminant, content, criterion) were analyzed. The EON measure showed adequate reliability, discriminant validity, and content validity. More work is needed to assess criterion validity because EON scores were not correlated with scores on a Census-based index used to measure quality of military neighborhoods. The EON may be useful in assessing broad local factors influencing health among returning veterans and spouses. More research is needed to understand geographic variation in neighborhood conditions and how those affect reintegration and mental health for military families.

Military Families’ Perceptions of Neighborhood Characteristics Affecting Reintegration: Development of an Aggregate Measure

PubMed Central

Beehler, Sarah; Ahern, Jennifer; Balmer, Brandi; Kuhlman, Jennifer

2017-01-01

This pilot study evaluated the validity and reliability of an Experience of Neighborhood (EON) measure developed to assess neighborhood characteristics that shape reintegration opportunities for returning service members and their families. A total of 91 post-9/11 veterans and spouses completed a survey administered at the Minnesota State Fair. Participants self-reported on their reintegration status (veterans), social functioning (spouses), social support, and mental health. EON factor structure, internal consistency reliability, and validity (discriminant, content, criterion) were analyzed. The EON measure showed adequate reliability, discriminant validity, and content validity. More work is needed to assess criterion validity because EON scores were not correlated with scores on a Census-based index used to measure quality of military neighborhoods. The EON may be useful in assessing broad local factors influencing health among returning veterans and spouses. More research is needed to understand geographic variation in neighborhood conditions and how those affect reintegration and mental health for military families. PMID:28936370

Development and Validation of a Racial Discrimination Measure for Cambodian American Adolescents

PubMed Central

Sangalang, Cindy C.; Chen, Angela C. C.; Kulis, Stephen S.; Yabiku, Scott T.

2015-01-01

To date, the majority of studies examining experiences of racial discrimination among youth use measures initially developed for African American and Latino adults or college students. Few studies have attended to the ways in which discrimination experiences may be unique for Asian American youth, particularly subgroups such as Southeast Asians. The purpose of this study was twofold: (a) to describe the development of a racial discrimination measure using community-based participatory research with Cambodian American adolescents and (b) to psychometrically test the measure with respect to validity and reliability. This research used mixed-methods and comprised 3 phases. Phase 1 consisted of qualitative focus group research to assess community-identified needs. Phase 2 included quantitative survey development with community members and resulted in an 18-item measure assessing the frequency of ethnicity-based discrimination. Phase 3 involved psychometric testing of the measure’s validity and reliability (n = 423). Exploratory factor analysis procedures yielded a 3-factor structure describing peer, school, and police discrimination from all items, capturing 96% of the combined variance. Using confirmatory factor analysis, the data demonstrated good fit with the 3-factor structure (CFI = .98; RMSEA = .054), with factor loadings ranging from .59 to .96 and all estimates statistically significant at the p < .05 level. Correlational analyses of racial discrimination subfactors and depression supported concurrent validity. In sum, this measure can be used to examine the degree and sources of racial discrimination reported by Cambodian American adolescents and potentially other adolescents of Southeast Asian descent living in diverse urban communities. PMID:26388972

Work-related subjective experiences among community residents with schizophrenia or schizoaffective disorder.

PubMed

Waghorn, Geoff; Chant, David; King, Robert

2005-04-01

To develop a self-report scale of subjective experiences of illness perceived to impact on employment functioning, as an alternative to a diagnostic perspective, for anticipating the vocational assistance needs of people with schizophrenia or schizoaffective disorders. A repeated measures pilot study (n(1) = 26, n(2) = 21) of community residents with schizophrenia identified a set of work-related subjective experiences perceived to impact on employment functioning. Items with the best psychometric properties were applied in a 12 month longitudinal survey of urban residents with schizophrenia or schizoaffective disorder (n(1) = 104; n(2) = 94; n(3) = 94). Construct validity, factor structure, responsiveness, internal consistency, stability, and criterion validity investigations produced favourable results. Work-related subjective experiences provide information about the intersection of the person, the disorder, and expectations of employment functioning, which suggest new opportunities for vocational professionals to explore and discuss individual assistance needs. Further psychometric investigations of test-retest reliability, discriminant and predictive validity, and research applications in supported employment and vocational rehabilitation, are recommended. Subject to adequate psychometric properties, the new measure promises to facilitate exploring: individuals' specific subjective experiences; how each is perceived to contribute to employment restrictions; and the corresponding implications for specialized treatment, vocational interventions and workplace accommodations.

Design and Validation of an Augmented Reality System for Laparoscopic Surgery in a Real Environment

PubMed Central

López-Mir, F.; Naranjo, V.; Fuertes, J. J.; Alcañiz, M.; Bueno, J.; Pareja, E.

2013-01-01

Purpose. This work presents the protocol carried out in the development and validation of an augmented reality system which was installed in an operating theatre to help surgeons with trocar placement during laparoscopic surgery. The purpose of this validation is to demonstrate the improvements that this system can provide to the field of medicine, particularly surgery. Method. Two experiments that were noninvasive for both the patient and the surgeon were designed. In one of these experiments the augmented reality system was used, the other one was the control experiment, and the system was not used. The type of operation selected for all cases was a cholecystectomy due to the low degree of complexity and complications before, during, and after the surgery. The technique used in the placement of trocars was the French technique, but the results can be extrapolated to any other technique and operation. Results and Conclusion. Four clinicians and ninety-six measurements obtained of twenty-four patients (randomly assigned in each experiment) were involved in these experiments. The final results show an improvement in accuracy and variability of 33% and 63%, respectively, in comparison to traditional methods, demonstrating that the use of an augmented reality system offers advantages for trocar placement in laparoscopic surgery. PMID:24236293

Developing the University of the Philippines Loneliness Assessment Scale: A Cross-Cultural Measurement

ERIC Educational Resources Information Center

Tharayil, Davis Porinchu

2012-01-01

As the existing scales to measure loneliness are almost all Western and there is no single scale developed cross-culturally for this purpose, this study is designed to develop a reliable and valid scale to measure the experience of loneliness of individuals from individualistic or collectivistic cultures. There are three samples for this study…

FY2017 Pilot Project Plan for the Nuclear Energy Knowledge and Validation Center Initiative

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Weiju

To prepare for technical development of computational code validation under the Nuclear Energy Knowledge and Validation Center (NEKVAC) initiative, several meetings were held by a group of experts of the Idaho National Laboratory (INL) and the Oak Ridge National Laboratory (ORNL) to develop requirements of, and formulate a structure for, a transient fuel database through leveraging existing resources. It was concluded in discussions of these meetings that a pilot project is needed to address the most fundamental issues that can generate immediate stimulus to near-future validation developments as well as long-lasting benefits to NEKVAC operation. The present project is proposedmore » based on the consensus of these discussions. Analysis of common scenarios in code validation indicates that the incapability of acquiring satisfactory validation data is often a showstopper that must first be tackled before any confident validation developments can be carried out. Validation data are usually found scattered in different places most likely with interrelationships among the data not well documented, incomplete with information for some parameters missing, nonexistent, or unrealistic to experimentally generate. Furthermore, with very different technical backgrounds, the modeler, the experimentalist, and the knowledgebase developer that must be involved in validation data development often cannot communicate effectively without a data package template that is representative of the data structure for the information domain of interest to the desired code validation. This pilot project is proposed to use the legendary TREAT Experiments Database to provide core elements for creating an ideal validation data package. Data gaps and missing data interrelationships will be identified from these core elements. All the identified missing elements will then be filled in with experimental data if available from other existing sources or with dummy data if nonexistent. The resulting hybrid validation data package (composed of experimental and dummy data) will provide a clear and complete instance delineating the structure of the desired validation data and enabling effective communication among the modeler, the experimentalist, and the knowledgebase developer. With a good common understanding of the desired data structure by the three parties of subject matter experts, further existing data hunting will be effectively conducted, new experimental data generation will be realistically pursued, knowledgebase schema will be practically designed; and code validation will be confidently planned.« less

Replicating the Z iron opacity experiments on the NIF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perry, T. S.; Heeter, R. F.; Opachich, Y. P.

Here, X-ray opacity is a crucial factor of all radiation-hydrodynamics calculations, yet it is one of the least validated of the material properties in the simulation codes. Recent opacity experiments at the Sandia Z-machine have shown up to factors of two discrepancies between theory and experiment, casting doubt on the validity of the opacity models. Therefore, a new experimental opacity platform is being developed on the National Ignition Facility (NIF) not only to verify the Z-machine experimental results but also to extend the experiments to other temperatures and densities. The first experiments will be directed towards measuring the opacity ofmore » iron at a temperature of ~160 eV and an electron density of ~7 x 10 21 cm -3. Preliminary experiments on NIF have demonstrated the ability to create a sufficiently bright point backlighter using an imploding plastic capsule and also a hohlraum that can heat the opacity sample to the desired conditions. The first of these iron opacity experiments is expected to be performed in 2017.« less

Replicating the Z iron opacity experiments on the NIF

DOE PAGES

Perry, T. S.; Heeter, R. F.; Opachich, Y. P.; ...

2017-05-12

Here, X-ray opacity is a crucial factor of all radiation-hydrodynamics calculations, yet it is one of the least validated of the material properties in the simulation codes. Recent opacity experiments at the Sandia Z-machine have shown up to factors of two discrepancies between theory and experiment, casting doubt on the validity of the opacity models. Therefore, a new experimental opacity platform is being developed on the National Ignition Facility (NIF) not only to verify the Z-machine experimental results but also to extend the experiments to other temperatures and densities. The first experiments will be directed towards measuring the opacity ofmore » iron at a temperature of ~160 eV and an electron density of ~7 x 10 21 cm -3. Preliminary experiments on NIF have demonstrated the ability to create a sufficiently bright point backlighter using an imploding plastic capsule and also a hohlraum that can heat the opacity sample to the desired conditions. The first of these iron opacity experiments is expected to be performed in 2017.« less

A novel cell culture model as a tool for forensic biology experiments and validations.

PubMed

Feine, Ilan; Shpitzen, Moshe; Roth, Jonathan; Gafny, Ron

2016-09-01

To improve and advance DNA forensic casework investigation outcomes, extensive field and laboratory experiments are carried out in a broad range of relevant branches, such as touch and trace DNA, secondary DNA transfer and contamination confinement. Moreover, the development of new forensic tools, for example new sampling appliances, by commercial companies requires ongoing validation and assessment by forensic scientists. A frequent challenge in these kinds of experiments and validations is the lack of a stable, reproducible and flexible biological reference material. As a possible solution, we present here a cell culture model based on skin-derived human dermal fibroblasts. Cultured cells were harvested, quantified and dried on glass slides. These slides were used in adhesive tape-lifting experiments and tests of DNA crossover confinement by UV irradiation. The use of this model enabled a simple and concise comparison between four adhesive tapes, as well as a straightforward demonstration of the effect of UV irradiation intensities on DNA quantity and degradation. In conclusion, we believe this model has great potential to serve as an efficient research tool in forensic biology. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

AMTEC flight experiment progress and plans

DOE Office of Scientific and Technical Information (OSTI.GOV)

Underwood, M.L.; Dobbs, M.; Giglio, J.

1997-12-31

An experiment is being developed to validate the performance of AMTEC technology in the space microgravity environment. A group of AMTEC cells have been fabricated and assembled into an experiment module and instrumented for operation. The experiment is manifested as a Hitchhiker payload on STS-88 now planned for flight in July 1998. The AMTEC cells will be operated in space for up to ten days. The microgravity developed distribution of the sodium working fluid will be frozen in place before the cells are returned to Earth. Upon return the cells will be destructively evaluated to determine the location of themore » sodium and to assure that the sodium has been properly controlled by the sodium control elements. This paper describes the experiment purpose, status, and plans for the flight operations and data analysis. An overview of how this experiment fits into the overall AMTEC development is also provided.« less

Stage 1 development of a patient-reported experience measure (PREM) for chronic obstructive pulmonary disease (COPD).

PubMed

Walker, Susan; Andrew, Sharon; Hodson, Matthew; Roberts, C Michael

2017-07-24

The study aimed to explore patients' experience of living with chronic obstructive pulmonary disease and their perspective of their community healthcare for chronic obstructive pulmonary disease to extract affective responses in order to develop potential items for a patient-reported experience measure for chronic obstructive pulmonary disease. Qualitative face-face interviews were conducted, in the community, with 64 patients with chronic obstructive pulmonary disease recruited from General Practices and Breathe-Easy community groups in the Outer North East, East and City areas of London and Essex, UK. A two phase analysis of the qualitative data was conducted to identify themes arising from patients' description of living with chronic obstructive pulmonary disease and their perceptions of their community healthcare and subsequently the affective responses underlying the themes raised by patients, which gave emotional colour to the themes, bringing the thematic analysis closer to the subjective patient experience. Five themes were identified from the interview data: 'Journey to diagnosis'; 'Smoking'; 'Usual care'; 'My everyday life'; and 'Exacerbations'. Twenty-one affective responses were identified and categorised as either 'negative', 'positive' or 'bivalent'. 'Frustration', a negative affective response was prevalent in four themes. 'Gratitude', 'hope' and 'happiness/enjoyment' were among the more positive responses more prevalent across several themes. By conducting a novel two-way analysis (thematic and affective) it was possible to identify themes and affective responses that were aligned to those themes. This enabled the development of 38 chronic obstructive pulmonary disease-specific experience items to take forward for further testing including item reduction and validity and reliability in the next stage of the patient-reported experience measure development. GIVING IMPORTANCE TO PATIENTS' EMOTIONS: An exploration of patient perceptions of living with chronic lung disease will help develop a new patient reported experience scale. Healthcare services are aiming to provide effective patient-centered care for those with chronic obstructive pulmonary disease (COPD). Such care strategies require structured, validated patient feedback scales to facilitate accurate communication between patients, carers and healthcare professionals. Susan Walker at Anglia Ruskin University in Chelmsford, UK, and co-workers analyzed qualitative data from interviews with 64 COPD patients in London and Essex regarding their emotions and perceptions of living with COPD, with the aim of creating a patient reported experience measure, or PREM. Initial results identified five themes-including 'journey to diagnosis' and 'everyday life'-and twenty-one affective responses, ranging from negative to positive. The team will take these results forward for further validation.

Development and Validation of the Work-Related Well-Being Index: Analysis of the Federal Employee Viewpoint Survey.

PubMed

Eaton, Jennifer L; Mohr, David C; Hodgson, Michael J; McPhaul, Kathleen M

2018-02-01

To describe development and validation of the work-related well-being (WRWB) index. Principal components analysis was performed using Federal Employee Viewpoint Survey (FEVS) data (N = 392,752) to extract variables representing worker well-being constructs. Confirmatory factor analysis was performed to verify factor structure. To validate the WRWB index, we used multiple regression analysis to examine relationships with burnout associated outcomes. Principal Components Analysis identified three positive psychology constructs: "Work Positivity", "Co-worker Relationships", and "Work Mastery". An 11 item index explaining 63.5% of variance was achieved. The structural equation model provided a very good fit to the data. Higher WRWB scores were positively associated with all three employee experience measures examined in regression models. The new WRWB index shows promise as a valid and widely accessible instrument to assess worker well-being.

Development and Validation of the Work-Related Well-Being Index: Analysis of the Federal Employee Viewpoint Survey (FEVS).

PubMed

Eaton, Jennifer L; Mohr, David C; Hodgson, Michael J; McPhaul, Kathleen M

2017-10-11

To describe development and validation of the Work-Related Well-Being (WRWB) Index. Principal Components Analysis was performed using Federal Employee Viewpoint Survey (FEVS) data (N = 392,752) to extract variables representing worker well-being constructs. Confirmatory factor analysis was performed to verify factor structure. To validate the WRWB index, we used multiple regression analysis to examine relationships with burnout associated outcomes. PCA identified three positive psychology constructs: "Work Positivity", "Co-worker Relationships", and "Work Mastery". An 11 item index explaining 63.5% of variance was achieved. The structural equation model provided a very good fit to the data. Higher WRWB scores were positively associated with all 3 employee experience measures examined in regression models. The new WRWB index shows promise as a valid and widely accessible instrument to assess worker well-being.

Evaluation and implementation of chemotherapy regimen validation in an electronic health record.

PubMed

Diaz, Amber H; Bubalo, Joseph S

2014-12-01

Computerized provider order entry of chemotherapy regimens is quickly becoming the standard for prescribing chemotherapy in both inpatient and ambulatory settings. One of the difficulties with implementation of chemotherapy regimen computerized provider order entry lies in verifying the accuracy and completeness of all regimens built in the system library. Our goal was to develop, implement, and evaluate a process for validating chemotherapy regimens in an electronic health record. We describe our experience developing and implementing a process for validating chemotherapy regimens in the setting of a standard, commercially available computerized provider order entry system. The pilot project focused on validating chemotherapy regimens in the adult inpatient oncology setting and adult ambulatory hematologic malignancy setting. A chemotherapy regimen validation process was defined as a result of the pilot project. Over a 27-week pilot period, 32 chemotherapy regimens were validated using the process we developed. Results of the study suggest that by validating chemotherapy regimens, the amount of time spent by pharmacists in daily chemotherapy review was decreased. In addition, the number of pharmacist modifications required to make regimens complete and accurate were decreased. Both physician and pharmacy disciplines showed improved satisfaction and confidence levels with chemotherapy regimens after implementation of the validation system. Chemotherapy regimen validation required a considerable amount of planning and time but resulted in increased pharmacist efficiency and improved provider confidence and satisfaction. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

'What women want': Using image theory to develop expectations of maternity care framework.

PubMed

Clark, Kim; Beatty, Shelley; Reibel, Tracy

2015-05-01

to develop, in consultation with women, a theoretically-grounded framework to guide the assessment of women's maternity-care experiences. qualitative research was undertaken with women to examine the appropriateness of Image Theory as a heuristic for understanding how women plan and evaluate their maternity-care experiences. maternity-care services in metropolitan and regional communities in Western Australia. an Episodes of Maternity Care Framework grounded in Image Theory was established that addressed various domains of women's perceptions and expectations of their maternity-care experience. previously-identified weaknesses of methods used to measure patient satisfaction were addressed and a valid framework for investigating women's perception of their maternity-services experiences was developed. This framework has the potential to contribute to the ongoing development and improvement of maternity-care service. Copyright © 2015 Elsevier Ltd. All rights reserved.

CFD validation experiments for hypersonic flows

NASA Technical Reports Server (NTRS)

Marvin, Joseph G.

1992-01-01

A roadmap for CFD code validation is introduced. The elements of the roadmap are consistent with air-breathing vehicle design requirements and related to the important flow path components: forebody, inlet, combustor, and nozzle. Building block and benchmark validation experiments are identified along with their test conditions and measurements. Based on an evaluation criteria, recommendations for an initial CFD validation data base are given and gaps identified where future experiments could provide new validation data.

Quality evaluation of health information system's architectures developed using the HIS-DF methodology.

PubMed

López, Diego M; Blobel, Bernd; Gonzalez, Carolina

2010-01-01

Requirement analysis, design, implementation, evaluation, use, and maintenance of semantically interoperable Health Information Systems (HIS) have to be based on eHealth standards. HIS-DF is a comprehensive approach for HIS architectural development based on standard information models and vocabulary. The empirical validity of HIS-DF has not been demonstrated so far. Through an empirical experiment, the paper demonstrates that using HIS-DF and HL7 information models, semantic quality of HIS architecture can be improved, compared to architectures developed using traditional RUP process. Semantic quality of the architecture has been measured in terms of model's completeness and validity metrics. The experimental results demonstrated an increased completeness of 14.38% and an increased validity of 16.63% when using the HIS-DF and HL7 information models in a sample HIS development project. Quality assurance of the system architecture in earlier stages of HIS development presumes an increased quality of final HIS systems, which supposes an indirect impact on patient care.

Validation of the ArthroS virtual reality simulator for arthroscopic skills.

PubMed

Stunt, J J; Kerkhoffs, G M M J; van Dijk, C N; Tuijthof, G J M

2015-11-01

Virtual reality simulator training has become important for acquiring arthroscopic skills. A new simulator for knee arthroscopy ArthroS™ has been developed. The purpose of this study was to demonstrate face and construct validity, executed according to a protocol used previously to validate arthroscopic simulators. Twenty-seven participants were divided into three groups having different levels of arthroscopic experience. Participants answered questions regarding general information and the outer appearance of the simulator for face validity. Construct validity was assessed with one standardized navigation task. Face validity, educational value and user friendliness were further determined by giving participants three exercises and by asking them to fill out the questionnaire. Construct validity was demonstrated between experts and beginners. Median task times were not significantly different for all repetitions between novices and intermediates, and between intermediates and experts. Median face validity was 8.3 for the outer appearance, 6.5 for the intra-articular joint and 4.7 for surgical instruments. Educational value and user friendliness were perceived as nonsatisfactory, especially because of the lack of tactile feedback. The ArthroS™ demonstrated construct validity between novices and experts, but did not demonstrate full face validity. Future improvements should be mainly focused on the development of tactile feedback. It is necessary that a newly presented simulator is validated to prove it actually contributes to proficiency of skills.

An innovative virtual reality training tool for orthognathic surgery.

PubMed

Pulijala, Y; Ma, M; Pears, M; Peebles, D; Ayoub, A

2018-02-01

Virtual reality (VR) surgery using Oculus Rift and Leap Motion devices is a multi-sensory, holistic surgical training experience. A multimedia combination including 360° videos, three-dimensional interaction, and stereoscopic videos in VR has been developed to enable trainees to experience a realistic surgery environment. The innovation allows trainees to interact with the individual components of the maxillofacial anatomy and apply surgical instruments while watching close-up stereoscopic three-dimensional videos of the surgery. In this study, a novel training tool for Le Fort I osteotomy based on immersive virtual reality (iVR) was developed and validated. Seven consultant oral and maxillofacial surgeons evaluated the application for face and content validity. Using a structured assessment process, the surgeons commented on the content of the developed training tool, its realism and usability, and the applicability of VR surgery for orthognathic surgical training. The results confirmed the clinical applicability of VR for delivering training in orthognathic surgery. Modifications were suggested to improve the user experience and interactions with the surgical instruments. This training tool is ready for testing with surgical trainees. Copyright © 2018 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Accreditation of Prior Experiential Learning as a Catalyst for Lifelong Learning: Analysis and Proposals Based on French Experiments

ERIC Educational Resources Information Center

Sanseau, Pierre-Yves; Ansart, Sandrine

2013-01-01

In this paper, the researchers analyse how lifelong learning can be enriched and develop a different perspective based on the experiment involving the accreditation of prior experiential learning (APEL) conducted in France at the university level. The French system for the accreditation of prior experiential learning, called Validation des Acquis…

Developing a Projective Drawing Test: Experiences with the Face Stimulus Assessment (FSA).

ERIC Educational Resources Information Center

Betts, Donna J.

2003-01-01

Describes the experience of creating and working with the Face Stimulus Assessment (FSA). Six samples of the FSA completed by clients with multiple disabilities are presented. As the FSA is a work in progress and has yet to be established as a valid and reliable assessment, implications for further research are also discussed. (Contains 32…

The Objectives of NASA's Living with a Star Space Environment Testbed

NASA Technical Reports Server (NTRS)

Barth, Janet L.; LaBel, Kenneth A.; Brewer, Dana; Kauffman, Billy; Howard, Regan; Griffin, Geoff; Day, John H. (Technical Monitor)

2001-01-01

NASA is planning to fly a series of Space Environment Testbeds (SET) as part of the Living With A Star (LWS) Program. The goal of the testbeds is to improve and develop capabilities to mitigate and/or accommodate the affects of solar variability in spacecraft and avionics design and operation. This will be accomplished by performing technology validation in space to enable routine operations, characterize technology performance in space, and improve and develop models, guidelines and databases. The anticipated result of the LWS/SET program is improved spacecraft performance, design, and operation for survival of the radiation, spacecraft charging, meteoroid, orbital debris and thermosphere/ionosphere environments. The program calls for a series of NASA Research Announcements (NRAs) to be issued to solicit flight validation experiments, improvement in environment effects models and guidelines, and collateral environment measurements. The selected flight experiments may fly on the SET experiment carriers and flights of opportunity on other commercial and technology missions. This paper presents the status of the project so far, including a description of the types of experiments that are intended to fly on SET-1 and a description of the SET-1 carrier parameters.

Development and validation of the Medical Home Care Coordination Survey for assessing care coordination in the primary care setting from the patient and provider perspectives.

PubMed

Zlateva, Ianita; Anderson, Daren; Coman, Emil; Khatri, Khushbu; Tian, Terrence; Fifield, Judith

2015-06-07

Community health centers are increasingly embracing the Patient Centered Medical Home (PCMH) model to improve quality, access to care, and patient experience while reducing healthcare costs. Care coordination (CC) is an important element of the PCMH model, but implementation and measurability of CC remains a problem within the outpatient setting. Assessing CC is an integral component of quality monitoring in health care systems. This study developed and validated the Medical Home Care Coordination Survey (MHCCS), to fill the gap in assessing CC in primary care from the perspectives of patients and their primary healthcare teams. We conducted a review of relevant literature and existing care coordination instruments identified by bibliographic search and contact with experts. After identifying all care coordination domains that could be assessed by primary healthcare team members and patients, we developed a conceptual model. Potentially appropriate items from existing published CC measures, along with newly developed items, were matched to each domain for inclusion. A modified Delphi approach was used to establish content validity. Primary survey data was collected from 232 patients with care transition and/or complex chronic illness needs from the Community Health Center, Inc. and from 164 staff members from 12 community health centers across the country via mail, phone and online survey. The MHCCS was validated for internal consistency, reliability, discriminant and convergent validity. This study was conducted at the Community Health Center, Inc. from January 15, 2012 to July 15, 2014. The 13-item MHCCS - Patient and the 32-item MHCCS - Healthcare Team were developed and validated. Exploratory Structural Equation Modeling was used to test the hypothesized domain structure. Four CC domains were confirmed from the patient group and eight were confirmed from the primary healthcare team group. All domains had high reliability (Cronbach's α scores were above 0.8). Patients experience the ultimate output of care coordination services, but primary healthcare staff members are best primed to perceive many of the structural elements of care coordination. The proactive measurement and monitoring of the core domains from both perspectives provides a richer body of information for the continuous improvement of care coordination services. The MHCCS shows promise as a valid and reliable assessment of these CC efforts.

Development and preliminary validation of an interactive remote physical therapy system.

PubMed

Mishra, Anup K; Skubic, Marjorie; Abbott, Carmen

2015-01-01

In this paper, we present an interactive physical therapy system (IPTS) for remote quantitative assessment of clients in the home. The system consists of two different interactive interfaces connected through a network, for a real-time low latency video conference using audio, video, skeletal, and depth data streams from a Microsoft Kinect. To test the potential of IPTS, experiments were conducted with 5 independent living senior subjects in Kansas City, MO. Also, experiments were conducted in the lab to validate the real-time biomechanical measures calculated using the skeletal data from the Microsoft Xbox 360 Kinect and Microsoft Xbox One Kinect, with ground truth data from a Vicon motion capture system. Good agreements were found in the validation tests. The results show potential capabilities of the IPTS system to provide remote physical therapy to clients, especially older adults, who may find it difficult to visit the clinic.

A Possible Tool for Checking Errors in the INAA Results, Based on Neutron Data and Method Validation

NASA Astrophysics Data System (ADS)

Cincu, Em.; Grigore, Ioana Manea; Barbos, D.; Cazan, I. L.; Manu, V.

2008-08-01

This work presents preliminary results of a new type of possible application in the INAA experiments of elemental analysis, useful to check errors occurred during investigation of unknown samples; it relies on the INAA method validation experiments and accuracy of the neutron data from the literature. The paper comprises 2 sections, the first one presents—in short—the steps of the experimental tests carried out for INAA method validation and for establishing the `ACTIVA-N' laboratory performance, which is-at the same time-an illustration of the laboratory evolution on the way to get performance. Section 2 presents our recent INAA results on CRMs, of which interpretation opens discussions about the usefulness of using a tool for checking possible errors, different from the usual statistical procedures. The questionable aspects and the requirements to develop a practical checking tool are discussed.

Quantum interactive learning tutorial on the double-slit experiment to improve student understanding of quantum mechanics

NASA Astrophysics Data System (ADS)

Sayer, Ryan; Maries, Alexandru; Singh, Chandralekha

2017-06-01

Learning quantum mechanics is challenging, even for upper-level undergraduate and graduate students. Research-validated interactive tutorials that build on students' prior knowledge can be useful tools to enhance student learning. We have been investigating student difficulties with quantum mechanics pertaining to the double-slit experiment in various situations that appear to be counterintuitive and contradict classical notions of particles and waves. For example, if we send single electrons through the slits, they may behave as a "wave" in part of the experiment and as a "particle" in another part of the same experiment. Here we discuss the development and evaluation of a research-validated Quantum Interactive Learning Tutorial (QuILT) which makes use of an interactive simulation to improve student understanding of the double-slit experiment and strives to help students develop a good grasp of foundational issues in quantum mechanics. We discuss common student difficulties identified during the development and evaluation of the QuILT and analyze the data from the pretest and post test administered to the upper-level undergraduate and first-year physics graduate students before and after they worked on the QuILT to assess its effectiveness. These data suggest that on average, the QuILT was effective in helping students develop a more robust understanding of foundational concepts in quantum mechanics that defy classical intuition using the context of the double-slit experiment. Moreover, upper-level undergraduates outperformed physics graduate students on the post test. One possible reason for this difference in performance may be the level of student engagement with the QuILT due to the grade incentive. In the undergraduate course, the post test was graded for correctness while in the graduate course, it was only graded for completeness.

The SATISPSY-22: development and validation of a French hospitalized patients' satisfaction questionnaire in psychiatry.

PubMed

Zendjidjian, X Y; Auquier, P; Lançon, C; Loundou, A; Parola, N; Faugère, M; Boyer, L

2015-01-01

The aim of our study was to develop a specific French self-administered instrument for measuring hospitalized patients' satisfaction in psychiatry based on exclusive patient point of view: the SATISPSY-22. The development of the SATISPSY was undertaken in three steps: item generation, item reduction, and validation. The content of the SATISPSY was derived from 80 interviews with patients hospitalized in psychiatry. Using item response and classical test theories, item reduction was performed in 2 hospitals on 270 responders. The validation was based on construct validity, reliability, and some aspects of external validity. The SATISPSY contains 22 items describing 6 dimensions (staff, quality of care, personal experience, information, activity, and food). The six-factor structure accounted for 78.0% of the total variance. Each item achieved the 0.40 standard for item-internal consistency, and the Cronbach's alpha coefficients were>0.70. Scores of dimensions were strongly positively correlated with Visual Analogue Scale scores. Significant associations with socioeconomic and clinical indicators showed good discriminant and external validity. INFIT statistics were ranged from 0.71 to 1.25. The SATISPSY-22 presents satisfactory psychometric properties, enabling patient feedback to be incorporated in a continuous quality health care improvement strategy. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Development and validation of an instrument to assess job satisfaction in eye-care personnel.

PubMed

Paudel, Prakash; Cronjé, Sonja; O'Connor, Patricia M; Khadka, Jyoti; Rao, Gullapalli N; Holden, Brien A

2017-11-01

The aim was to develop and validate an instrument to measure job satisfaction in eye-care personnel and assess the job satisfaction of one-year trained vision technicians in India. A pilot instrument for assessing job satisfaction was developed, based on a literature review and input from a public health expert panel. Rasch analysis was used to assess psychometric properties and to undertake an iterative item reduction. The instrument was then administered to vision technicians in vision centres of Andhra Pradesh in India. Associations between vision technicians' job satisfaction and factors such as age, gender and experience were analysed using t-test and one-way analysis of variance. Rasch analysis confirmed that the 15-item job satisfaction in eye-care personnel (JSEP) was a unidimensional instrument with good fit statistics, measurement precisions and absence of differential item functioning. Overall, vision technicians reported high rates of job satisfaction (0.46 logits). Age, gender and experience were not associated with high job satisfaction score. Item score analysis showed non-financial incentives, salary and workload were the most important determinants of job satisfaction. The 15-item JSEP instrument is a valid instrument for assessing job satisfaction among eye-care personnel. Overall, vision technicians in India demonstrated high rates of job satisfaction. © 2016 Optometry Australia.

Development and validation of Dutch version of Lasater Clinical Judgment Rubric in hospital practice: An instrument design study.

PubMed

Vreugdenhil, Jettie; Spek, Bea

2018-03-01

Clinical reasoning in patient care is a skill that cannot be observed directly. So far, no reliable, valid instrument exists for the assessment of nursing students' clinical reasoning skills in hospital practice. Lasater's clinical judgment rubric (LCJR), based on Tanner's model "Thinking like a nurse" has been tested, mainly in academic simulation settings. The aim is to develop a Dutch version of the LCJR (D-LCJR) and to test its psychometric properties when used in a hospital traineeship context. A mixed-model approach was used to develop and to validate the instrument. Ten dedicated educational units in a university hospital. A well-mixed group of 52 nursing students, nurse coaches and nurse educators. A Delphi panel developed the D-LCJR. Students' clinical reasoning skills were assessed "live" by nurse coaches, nurse educators and students who rated themselves. The psychometric properties tested during the assessment process are reliability, reproducibility, content validity and construct validity by testing two hypothesis: 1) a positive correlation between assessed and self-reported sum scores (convergent validity) and 2) a linear relation between experience and sum score (clinical validity). The obtained D-LCJR was found to be internally consistent, Cronbach's alpha 0.93. The rubric is also reproducible with intraclass correlations between 0.69 and 0.78. Experts judged it to be content valid. The two hypothesis were both tested significant, supporting evidence for construct validity. The translated and modified LCJR, is a promising tool for the evaluation of nursing students' development in clinical reasoning in hospital traineeships, by students, nurse coaches and nurse educators. More evidence on construct validity is necessary, in particular for students at the end of their hospital traineeship. Based on our research, the D-LCJR applied in hospital traineeships is a usable and reliable tool. Copyright © 2017 Elsevier Ltd. All rights reserved.

Development and initial validation of the Swedish Family Satisfaction Intensive Care Questionnaire (SFS-ICQ).

PubMed

Thermaenius, Johan; Schandl, Anna; Sluys, Kerstin Prignitz

2018-06-20

Measuring patients satisfaction is an important part of continuous quality improvement in health care. In intensive care, family satisfaction is often used as a proxy for patient experience. At present, no suitable instrument to measure this has been fully validated in Sweden. The purpose of this study was to develop and validate a questionnaire intended to evaluate families' satisfaction of quality of care in Swedish intensive care units. Based on literature and the modification of pertinent items in two existing North American questionnaires, a Swedish questionnaire was developed. Content validity was assessed by experts, and the cognitive method Think Aloud was used with twelve family members of intensive care patients in two different intensive care units. Data was analysed using qualitative content analysis. Seven items in the questionnaire were identified as problematic, causing eight problems concerning questioning of content and 23 concerning misunderstanding. Six of these items were changed in order to be understood the way they were intended, and one item was removed. A family satisfaction questionnaire applicable in Swedish intensive care units has been developed and validated for respondents' understanding of the questions being asked. However, further psychometric testing should be performed when more data are available. Copyright © 2018 Elsevier Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marshall, William BJ J; Rearden, Bradley T

The validation of neutron transport methods used in nuclear criticality safety analyses is required by consensus American National Standards Institute/American Nuclear Society (ANSI/ANS) standards. In the last decade, there has been an increased interest in correlations among critical experiments used in validation that have shared physical attributes and which impact the independence of each measurement. The statistical methods included in many of the frequently cited guidance documents on performing validation calculations incorporate the assumption that all individual measurements are independent, so little guidance is available to practitioners on the topic. Typical guidance includes recommendations to select experiments from multiple facilitiesmore » and experiment series in an attempt to minimize the impact of correlations or common-cause errors in experiments. Recent efforts have been made both to determine the magnitude of such correlations between experiments and to develop and apply methods for adjusting the bias and bias uncertainty to account for the correlations. This paper describes recent work performed at Oak Ridge National Laboratory using the Sampler sequence from the SCALE code system to develop experimental correlations using a Monte Carlo sampling technique. Sampler will be available for the first time with the release of SCALE 6.2, and a brief introduction to the methods used to calculate experiment correlations within this new sequence is presented in this paper. Techniques to utilize these correlations in the establishment of upper subcritical limits are the subject of a companion paper and will not be discussed here. Example experimental uncertainties and correlation coefficients are presented for a variety of low-enriched uranium water-moderated lattice experiments selected for use in a benchmark exercise by the Working Party on Nuclear Criticality Safety Subgroup on Uncertainty Analysis in Criticality Safety Analyses. The results include studies on the effect of fuel rod pitch on the correlations, and some observations are also made regarding difficulties in determining experimental correlations using the Monte Carlo sampling technique.« less

Experiences in integrating auto-translated state-chart designs for model checking

NASA Technical Reports Server (NTRS)

Pingree, P. J.; Benowitz, E. G.

2003-01-01

In the complex environment of JPL's flight missions with increasing dependency on advanced software designs, traditional software validation methods of simulation and testing are being stretched to adequately cover the needs of software development.

An Indigenous Knowledges Perspective on Valid Meaning Making: A Commentary on Research with the EDI and Aboriginal Communities

ERIC Educational Resources Information Center

Sam, Michele A.

2011-01-01

Offering an Indigenous perspective, this commentary discusses collaborative research, shared meaning making, and knowledge building specific to child development, and reflects on social, cultural, and historical aspects that influence these processes. Drawing upon experiences of developing a collaborative research approach with which to engage…

Dynamic Assessment: One Approach and Some Initial Data. Technical Report No. 361.

ERIC Educational Resources Information Center

Campione, Joseph C.; Brown, Ann L.

In an effort to validate dynamic assessment methods influenced by Vygotsky's (1978) definition of zones of proximal development (an indicator of readiness), three sets of experiments addressed two goals: the development of diagnostic assessment methods and the use of diagnostic results to guide the design of instructional programs. The first two…

A mass transfer model of ethanol emission from thin layers of corn silage

USDA-ARS?s Scientific Manuscript database

A mass transfer model of ethanol emission from thin layers of corn silage was developed and validated. The model was developed based on data from wind tunnel experiments conducted at different temperatures and air velocities. Multiple regression analysis was used to derive an equation that related t...

The Relation of Moral Judgment Development and Educational Experience to Recall of Moral Narratives and Expository Texts

ERIC Educational Resources Information Center

Narvaez, Darcia; Gleason, Tracy

2007-01-01

Moral text processing was used as an ecologically valid method for assessing implicit and explicit moral understanding and development. The authors tested undergraduates, seminarians, and graduate students in political science and philosophy for recall of moral narratives and moral expository texts. Multivariate analyses of covariance using…

Advancing Diagnostic Skills for Technology and Engineering Undergraduates: A Summary of the Validation Data

ERIC Educational Resources Information Center

Foster, W. Tad; Shahhosseini, A. Mehran; Maughan, George

2016-01-01

Facilitating student growth and development in diagnosing and solving technical problems remains a challenge for technology and engineering educators. With funding from the National Science Foundation, this team of researchers developed a self-guided, computer-based instructional program to experiment with conceptual mapping as a treatment to…

Development and Validation of a Brief Measure of Psychological Resilience: An Adaptation of the Response to Stressful Experiences Scale.

PubMed

De La Rosa, Gabriel M; Webb-Murphy, Jennifer A; Johnston, Scott L

2016-03-01

Resilience helps determine how people respond to stress. The Response to Stressful Events Scale (RSES) is an existing 22-item measure of resilience. We investigate the psychometric properties of the RSES and develop a 4-item measure of resilience using the most discriminating items from the RSES. Among two samples of military personnel presenting to mental health clinics, we see that the abbreviated resilience measure displays comparable internal consistency and test-retest reliability (versus the existing RSES). Among a sample of deployed military personnel, the abbreviated scale relates to validated measures of psychological strain. The 4-item abbreviated RSES measure is a brief, reliable, and valid measure of resilience. Reprint & Copyright © 2016 Association of Military Surgeons of the U.S.

Assessing Asthma Symptoms in Adolescents and Adults: Qualitative Research Supporting Development of the Asthma Daily Symptom Diary.

PubMed

Gater, Adam; Nelsen, Linda; Fleming, Sarah; Lundy, J Jason; Bonner, Nicola; Hall, Rebecca; Marshall, Chris; Staunton, Hannah; Krishnan, Jerry A; Stoloff, Stuart; Schatz, Michael; Haughney, John

2016-06-01

Despite the widespread availability of patient-reported asthma questionnaires, instruments developed in accordance with present regulatory expectations are lacking. To address this gap, the Patient-Reported Outcome (PRO) Consortium's Asthma Working Group has developed a patient-reported asthma daily symptom diary (ADSD) for use in clinical research to assess outcomes and support medical product labeling claims in adults and adolescents with asthma. To summarize the qualitative research conducted to inform the initial development of the ADSD and to provide evidence for content validity of the instrument in accordance with the Food and Drug Administration's PRO Guidance. Research informing the initial development and confirming the content validity of the ADSD is summarized. This comprised a review of published qualitative research, semi-structured concept elicitation interviews (n = 55), and cognitive interviews (n = 65) with a diverse and representative sample of adults and adolescents with a clinician-confirmed diagnosis of asthma in the United States to understand the asthma symptom experience and to assess the relevance and understanding of the newly developed ADSD. From the qualitative literature review and concept elicitation interviews, eight core asthma symptoms emerged. These were broadly categorized as breathing symptoms (difficulty breathing, shortness of breath, and wheezing), chest symptoms (chest tightness, chest pain, and pressure/weight on chest), and cough symptoms (cough and the presence of mucus/phlegm). Conceptual saturation was achieved and differences in the experience of participants according to socio-demographic or clinical characteristics were not observed. Subsequent testing of the ADSD confirmed participant relevance and understanding. The ADSD is a new patient-reported asthma symptom diary developed in accordance with the Food and Drug Administration's PRO Guidance. Evidence to date supports the content validity of the instrument. Item performance, reliability, and construct validity will be assessed in future quantitative research. Copyright © 2016 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Development and psychometric testing of the Protective Reasons Against Suicide Inventory for assessing older Chinese-speaking outpatients in primary care settings.

PubMed

Wang, Yi-Wen; Tsai, Yun-Fang; Lee, Shwu-Hua; Chen, Ying-Jen; Chen, Hsiu-Fang

2016-07-01

To develop and psychometrically test the Protective Reasons against Suicide Inventory among older Chinese-speaking outpatients. Tools currently exist to test reasons for living among individuals of all ages in western countries, but few are available to assess older adults' protective reasons against suicide in Asia. A cross-sectional survey to investigate protective reasons against suicide among older Chinese-speaking outpatients. The Protective Reasons against Suicide Inventory was developed based on individual interviews with 83 older outpatients in Taiwan, the literature and the authors' clinical experiences. The resulting Inventory was examined in 2013 for content validity, face validity, construct validity, criterion-related validity, internal consistency reliability and test-retest reliability. The Inventory had excellent content validity and face validity. Factor analysis yielded a seven-factor solution, accounting for 87·7% of the variance. Scores on the global Inventory and its subscales tended to be higher in outpatients diagnosed without suicidal ideation than in outpatients diagnosed with suicidal ideation, indicating good criterion validity. Inventory reliability and the intraclass correlation coefficient were satisfactory. The Protective Reasons against Suicide Inventory can be completed in 5 minutes and is perceived as easy to complete. Moreover, the Inventory yielded highly acceptable parameters for validity and reliability. The Protective Reasons against Suicide Inventory can be used to assess older Chinese-speaking outpatients for factors that protect them from attempting suicide. © 2016 John Wiley & Sons Ltd.

Development of the Assessment of Belief Conflict in Relationship-14 (ABCR-14).

PubMed

Kyougoku, Makoto; Teraoka, Mutsumi; Masuda, Noriko; Ooura, Mariko; Abe, Yasushi

2015-01-01

Nurses and other healthcare workers frequently experience belief conflict, one of the most important, new stress-related problems in both academic and clinical fields. In this study, using a sample of 1,683 nursing practitioners, we developed The Assessment of Belief Conflict in Relationship-14 (ABCR-14), a new scale that assesses belief conflict in the healthcare field. Standard psychometric procedures were used to develop and test the scale, including a qualitative framework concept and item-pool development, item reduction, and scale development. We analyzed the psychometric properties of ABCR-14 according to entropy, polyserial correlation coefficient, exploratory factor analysis, confirmatory factor analysis, average variance extracted, Cronbach's alpha, Pearson product-moment correlation coefficient, and multidimensional item response theory (MIRT). The results of the analysis supported a three-factor model consisting of 14 items. The validity and reliability of ABCR-14 was suggested by evidence from high construct validity, structural validity, hypothesis testing, internal consistency reliability, and concurrent validity. The result of the MIRT offered strong support for good item response of item slope parameters and difficulty parameters. However, the ABCR-14 Likert scale might need to be explored from the MIRT point of view. Yet, as mentioned above, there is sufficient evidence to support that ABCR-14 has high validity and reliability. The ABCR-14 demonstrates good psychometric properties for nursing belief conflict. Further studies are recommended to confirm its application in clinical practice.

The Nuclear Energy Knowledge and Validation Center Summary of Activities Conducted in FY16

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gougar, Hans David

The Nuclear Energy Knowledge and Validation Center (NEKVaC) is a new initiative by the Department of Energy (DOE) and Idaho National Laboratory (INL) to coordinate and focus the resources and expertise that exist with the DOE toward solving issues in modern nuclear code validation and knowledge management. In time, code owners, users, and developers will view the NEKVaC as a partner and essential resource for acquiring the best practices and latest techniques for validating codes, providing guidance in planning and executing experiments, facilitating access to and maximizing the usefulness of existing data, and preserving knowledge for continual use by nuclearmore » professionals and organizations for their own validation needs. The scope of the NEKVaC covers many interrelated activities that will need to be cultivated carefully in the near term and managed properly once the NEKVaC is fully functional. Three areas comprise the principal mission: (1) identify and prioritize projects that extend the field of validation science and its application to modern codes, (2) develop and disseminate best practices and guidelines for high-fidelity multiphysics/multiscale analysis code development and associated experiment design, and (3) define protocols for data acquisition and knowledge preservation and provide a portal for access to databases currently scattered among numerous organizations. These mission areas, while each having a unique focus, are interdependent and complementary. Likewise, all activities supported by the NEKVaC, both near term and long term, must possess elements supporting all three areas. This cross cutting nature is essential to ensuring that activities and supporting personnel do not become “stove piped” (i.e., focused a specific function that the activity itself becomes the objective rather than achieving the larger vision). This report begins with a description of the mission areas; specifically, the role played by each major committee and the types of activities for which they are responsible. It then lists and describes the proposed near term tasks upon which future efforts can build.« less

The SCALE Verified, Archived Library of Inputs and Data - VALID

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marshall, William BJ J; Rearden, Bradley T

The Verified, Archived Library of Inputs and Data (VALID) at ORNL contains high quality, independently reviewed models and results that improve confidence in analysis. VALID is developed and maintained according to a procedure of the SCALE quality assurance (QA) plan. This paper reviews the origins of the procedure and its intended purpose, the philosophy of the procedure, some highlights of its implementation, and the future of the procedure and associated VALID library. The original focus of the procedure was the generation of high-quality models that could be archived at ORNL and applied to many studies. The review process associated withmore » model generation minimized the chances of errors in these archived models. Subsequently, the scope of the library and procedure was expanded to provide high quality, reviewed sensitivity data files for deployment through the International Handbook of Evaluated Criticality Safety Benchmark Experiments (IHECSBE). Sensitivity data files for approximately 400 such models are currently available. The VALID procedure and library continue fulfilling these multiple roles. The VALID procedure is based on the quality assurance principles of ISO 9001 and nuclear safety analysis. Some of these key concepts include: independent generation and review of information, generation and review by qualified individuals, use of appropriate references for design data and documentation, and retrievability of the models, results, and documentation associated with entries in the library. Some highlights of the detailed procedure are discussed to provide background on its implementation and to indicate limitations of data extracted from VALID for use by the broader community. Specifically, external users of data generated within VALID must take responsibility for ensuring that the files are used within the QA framework of their organization and that use is appropriate. The future plans for the VALID library include expansion to include additional experiments from the IHECSBE, to include experiments from areas beyond criticality safety, such as reactor physics and shielding, and to include application models. In the future, external SCALE users may also obtain qualification under the VALID procedure and be involved in expanding the library. The VALID library provides a pathway for the criticality safety community to leverage modeling and analysis expertise at ORNL.« less

Definition of technology development missions for early Space Station satellite servicing. Volume 2: Technical

NASA Technical Reports Server (NTRS)

Cable, D. A.; Diewald, C. A.; Hills, T. C.; Parmentier, T. J.; Spencer, R. A.; Stone, G. E.

1984-01-01

Volume 2 contains the Technical Report of the approach and results of the Phase 2 study. The phase 2 servicing study was initiated in June 1983, and is being reported in this document. The scope of the contract was to: (1) define in detail five selected technology development missions (TDM); (2) conduct a design requirement analysis to refine definitions of satellite servicing requirements at the space station; and (3) develop a technology plan that would identify and schedule prerequisite precursor technology development, associated. STS flight experiments and space station experiments needed to provide onorbit validation of the evolving technology.

Development and Validation of a Scale Assessing Mental Health Clinicians' Experiences of Associative Stigma.

PubMed

Yanos, Philip T; Vayshenker, Beth; DeLuca, Joseph S; O'Connor, Lauren K

2017-10-01

Mental health professionals who work with people with serious mental illnesses are believed to experience associative stigma. Evidence suggests that associative stigma could play an important role in the erosion of empathy among professionals; however, no validated measure of the construct currently exists. This study examined the convergent and discriminant validity and factor structure of a new scale assessing the associative stigma experiences of clinicians working with people with serious mental illnesses. A total of 473 clinicians were recruited from professional associations in the United States and participated in an online study. Participants completed the Clinician Associative Stigma Scale (CASS) and measures of burnout, quality of care, expectations about recovery, and self-efficacy. Associative stigma experiences were commonly endorsed; eight items on the 18-item scale were endorsed as being experienced "sometimes" or "often" by over 50% of the sample. The new measure demonstrated a logical four-factor structure: "negative stereotypes about professional effectiveness," "discomfort with disclosure," "negative stereotypes about people with mental illness," and "stereotypes about professionals' mental health." The measure had good internal consistency. It was significantly related to measures of burnout and quality of care, but it was not related to measures of self-efficacy or expectations about recovery. Findings suggest that the CASS is internally consistent and shows evidence of convergent validity and that associative stigma is commonly experienced by mental health professionals who work with people with serious mental illnesses.

Isotope Inversion Experiment evaluating the suitability of calibration in surrogate matrix for quantification via LC-MS/MS-Exemplary application for a steroid multi-method.

PubMed

Suhr, Anna Catharina; Vogeser, Michael; Grimm, Stefanie H

2016-05-30

For quotable quantitative analysis of endogenous analytes in complex biological samples by isotope dilution LC-MS/MS, the creation of appropriate calibrators is a challenge, since analyte-free authentic material is in general not available. Thus, surrogate matrices are often used to prepare calibrators and controls. However, currently employed validation protocols do not include specific experiments to verify the suitability of a surrogate matrix calibration for quantification of authentic matrix samples. The aim of the study was the development of a novel validation experiment to test whether surrogate matrix based calibrators enable correct quantification of authentic matrix samples. The key element of the novel validation experiment is the inversion of nonlabelled analytes and their stable isotope labelled (SIL) counterparts in respect to their functions, i.e. SIL compound is the analyte and nonlabelled substance is employed as internal standard. As a consequence, both surrogate and authentic matrix are analyte-free regarding SIL analytes, which allows a comparison of both matrices. We called this approach Isotope Inversion Experiment. As figure of merit we defined the accuracy of inverse quality controls in authentic matrix quantified by means of a surrogate matrix calibration curve. As a proof-of-concept application a LC-MS/MS assay addressing six corticosteroids (cortisol, cortisone, corticosterone, 11-deoxycortisol, 11-deoxycorticosterone, and 17-OH-progesterone) was chosen. The integration of the Isotope Inversion Experiment in the validation protocol for the steroid assay was successfully realized. The accuracy results of the inverse quality controls were all in all very satisfying. As a consequence the suitability of a surrogate matrix calibration for quantification of the targeted steroids in human serum as authentic matrix could be successfully demonstrated. The Isotope Inversion Experiment fills a gap in the validation process for LC-MS/MS assays quantifying endogenous analytes. We consider it a valuable and convenient tool to evaluate the correct quantification of authentic matrix samples based on a calibration curve in surrogate matrix. Copyright © 2016 Elsevier B.V. All rights reserved.

Development and Psychometric Properties of the Decision Making on the Type of Delivery Questionnaire in Iranian Women.

PubMed

Latifnejad Roudsari, Robab; Zakerihamidi, Maryam; Merghati Khoei, Effat; Kazemnejad, Anoshirvan

2017-07-01

A tool which can help to decide on the determinants in selecting the delivery type is an effective step towards the goals of the World Health. This study aimed to develop and evaluate the psychometric properties of a scale based on Iranian culture to make decision on the type of delivery. This is a methodological study using a questionnaire proposed by Schneider. The following steps were used to design the project. In the first step, perceptions and experiences of 45 pregnant women, postpartum women, midwives, gynecologists and non-pregnant women were determined based on interviews and observations using focused ethnography. In the second stage, the terms in the questionnaire based on qualitative study was assessed. Then, in the third stage, psychometric testing of the decision making on the type of delivery scale (DMTDS) based on the cultural concepts of decision making towards the type of delivery and its influencing factors based on focused ethnography using face validity, content validity, construct validity, internal consistency and reliability was done on400 pregnant and postpartum women. The initially developed scale consisted of 60 items on a 5-point Likert scale, which reduced to 43 items following measurement of the face and content validity. The results of the exploratory factor analysis elicited 36 items and a seven-factor structure including motivational beliefs on vaginal delivery, social beliefs towards childbirth, motivational beliefs on cesarean delivery, personal beliefs, sources of information, catastrophic thinking and child birth experiences. Cronbach's alpha coefficient (0.80) confirmed the high internal consistency of the scale. The developed questionnaire appears to be a valid and reliable tool for health care providers to measure the women's decision making towards type of delivery. Therefore, this tool can be used in the Iranian community. The scale may help the midwives and obstetricians to be aware of the women's decision regarding their choice of delivery and as a result to plan appropriately in order to reduce unnecessary cesarean sections.

Tracking wakefulness as it fades: Micro-measures of alertness.

PubMed

Jagannathan, Sridhar R; Ezquerro-Nassar, Alejandro; Jachs, Barbara; Pustovaya, Olga V; Bareham, Corinne A; Bekinschtein, Tristan A

2018-08-01

A major problem in psychology and physiology experiments is drowsiness: around a third of participants show decreased wakefulness despite being instructed to stay alert. In some non-visual experiments participants keep their eyes closed throughout the task, thus promoting the occurrence of such periods of varying alertness. These wakefulness changes contribute to systematic noise in data and measures of interest. To account for this omnipresent problem in data acquisition we defined criteria and code to allow researchers to detect and control for varying alertness in electroencephalography (EEG) experiments under eyes-closed settings. We first revise a visual-scoring method developed for detection and characterization of the sleep-onset process, and adapt the same for detection of alertness levels. Furthermore, we show the major issues preventing the practical use of this method, and overcome these issues by developing an automated method (micro-measures algorithm) based on frequency and sleep graphoelements, which are capable of detecting micro variations in alertness. The validity of the micro-measures algorithm was verified by training and testing using a dataset where participants are known to fall asleep. In addition, we tested generalisability by independent validation on another dataset. The methods developed constitute a unique tool to assess micro variations in levels of alertness and control trial-by-trial retrospectively or prospectively in every experiment performed with EEG in cognitive neuroscience under eyes-closed settings. Copyright © 2018. Published by Elsevier Inc.

Development plan for the External Hazards Experimental Group. Light Water Reactor Sustainability Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coleman, Justin Leigh; Smith, Curtis Lee; Burns, Douglas Edward

This report describes the development plan for a new multi-partner External Hazards Experimental Group (EHEG) coordinated by Idaho National Laboratory (INL) within the Risk-Informed Safety Margin Characterization (RISMC) technical pathway of the Light Water Reactor Sustainability Program. Currently, there is limited data available for development and validation of the tools and methods being developed in the RISMC Toolkit. The EHEG is being developed to obtain high-quality, small- and large-scale experimental data validation of RISMC tools and methods in a timely and cost-effective way. The group of universities and national laboratories that will eventually form the EHEG (which is ultimately expectedmore » to include both the initial participants and other universities and national laboratories that have been identified) have the expertise and experimental capabilities needed to both obtain and compile existing data archives and perform additional seismic and flooding experiments. The data developed by EHEG will be stored in databases for use within RISMC. These databases will be used to validate the advanced external hazard tools and methods.« less

Validation of Immunohistochemical Assays for Integral Biomarkers in the NCI-MATCH EAY131 Clinical Trial.

PubMed

Khoury, Joseph D; Wang, Wei-Lien; Prieto, Victor G; Medeiros, L Jeffrey; Kalhor, Neda; Hameed, Meera; Broaddus, Russell; Hamilton, Stanley R

2018-02-01

Biomarkers that guide therapy selection are gaining unprecedented importance as targeted therapy options increase in scope and complexity. In conjunction with high-throughput molecular techniques, therapy-guiding biomarker assays based upon immunohistochemistry (IHC) have a critical role in cancer care in that they inform about the expression status of a protein target. Here, we describe the validation procedures for four clinical IHC biomarker assays-PTEN, RB, MLH1, and MSH2-for use as integral biomarkers in the nationwide NCI-Molecular Analysis for Therapy Choice (NCI-MATCH) EAY131 clinical trial. Validation procedures were developed through an iterative process based on collective experience and adaptation of broad guidelines from the FDA. The steps included primary antibody selection; assay optimization; development of assay interpretation criteria incorporating biological considerations; and expected staining patterns, including indeterminate results, orthogonal validation, and tissue validation. Following assay lockdown, patient samples and cell lines were used for analytic and clinical validation. The assays were then approved as laboratory-developed tests and used for clinical trial decisions for treatment selection. Calculations of sensitivity and specificity were undertaken using various definitions of gold-standard references, and external validation was required for the PTEN IHC assay. In conclusion, validation of IHC biomarker assays critical for guiding therapy in clinical trials is feasible using comprehensive preanalytic, analytic, and postanalytic steps. Implementation of standardized guidelines provides a useful framework for validating IHC biomarker assays that allow for reproducibility across institutions for routine clinical use. Clin Cancer Res; 24(3); 521-31. ©2017 AACR . ©2017 American Association for Cancer Research.

Managing design excellence tools during the development of new orthopaedic implants.

PubMed

Défossez, Henri J P; Serhan, Hassan

2013-11-01

Design excellence (DEX) tools have been widely used for years in some industries for their potential to facilitate new product development. The medical sector, targeted by cost pressures, has therefore started adopting them. Numerous tools are available; however only appropriate deployment during the new product development stages can optimize the overall process. The primary study objectives were to describe generic tools and illustrate their implementation and management during the development of new orthopaedic implants, and compile a reference package. Secondary objectives were to present the DEX tool investment costs and savings, since the method can require significant resources for which companies must carefully plan. The publicly available DEX method "Define Measure Analyze Design Verify Validate" was adopted and implemented during the development of a new spinal implant. Several tools proved most successful at developing the correct product, addressing clinical needs, and increasing market penetration potential, while reducing design iterations and manufacturing validations. Cost analysis and Pugh Matrix coupled with multi generation planning enabled developing a strong rationale to activate the project, set the vision and goals. improved risk management and product map established a robust technical verification-validation program. Design of experiments and process quantification facilitated design for manufacturing of critical features, as early as the concept phase. Biomechanical testing with analysis of variance provided a validation model with a recognized statistical performance baseline. Within those tools, only certain ones required minimum resources (i.e., business case, multi generational plan, project value proposition, Pugh Matrix, critical To quality process validation techniques), while others required significant investments (i.e., voice of customer, product usage map, improved risk management, design of experiments, biomechanical testing techniques). All used techniques provided savings exceeding investment costs. Some other tools were considered and found less relevant. A matrix summarized the investment costs and generated estimated savings. Globally, all companies can benefit from using DEX by smartly selecting and estimating those tools with best return on investment at the start of the project. For this, a good understanding of the available company resources, background and development strategy are needed. In conclusion, it was possible to illustrate that appropriate management of design excellence tools can greatly facilitate the development of new orthopaedic implant systems.

Incorporating field wind data into FIRETEC simulations of the International Crown Fire Modeling Experiment (ICFME): preliminary lessons learned

Treesearch

Rodman Linn; Kerry Anderson; Judith Winterkamp; Alyssa Broos; Michael Wotton; Jean-Luc Dupuy; Francois Pimont; Carleton Edminster

2012-01-01

Field experiments are one way to develop or validate wildland fire-behavior models. It is important to consider the implications of assumptions relating to the locality of measurements with respect to the fire, the temporal frequency of the measured data, and the changes to local winds that might be caused by the experimental configuration. Twenty FIRETEC simulations...

The Daily Heterosexist Experiences Questionnaire: Measuring Minority Stress Among Lesbian, Gay, Bisexual, and Transgender Adults

PubMed Central

Balsam, Kimberly F.; Beadnell, Blair; Molina, Yamile

2013-01-01

The authors conducted a three-phase, mixed-methods study to develop a self-report measure assessing the unique aspects of minority stress for lesbian, gay, bisexual, and transgender adults. The Daily Heterosexist Experiences Questionnaire has 50 items and nine subscales with acceptable internal reliability, and construct and concurrent validity. Mean sexual orientation and gender differences were found. PMID:24058262

An Investigation of the Teacher Competencies Needed to Utilize Diagnostic Test Data in Prescribing Occupational Learning Experiences in Teaching EMRS. Final Report. Part II. Appendices.

ERIC Educational Resources Information Center

Nelson, Orville; And Others

These appendixes are to the final report of an action research Project conducted to determine the teacher competencies needed in order to develop valid and effective occupational learning experiences for educable mentally retarded (EMR) students based on available diagnostic test data and information. Included are (1) participant vitas and…

Developing the Cyber Victimization Experiences and Cyberbullying Behaviors Scales.

PubMed

Betts, Lucy R; Spenser, Karin A

2017-01-01

The reported prevalence rates of cyber victimization experiences and cyberbullying behaviors vary. Part of this variation is likely due to the diverse definitions and operationalizations of the constructs adopted in previous research and the lack of psychometrically robust measures. Through 2 studies, the authors developed (Study 1) and evaluated (Study 2) the cyber victimization experiences and cyberbullying behaviors scales. Participants in Study 1 were 393 (122 boys, 171 girls) and in Study 2 were 345 (153 boys, 192 girls) 11-15-year-olds who completed measures of cyber victimization experiences, cyberbullying behaviors, face-to-face victimization experiences, face-to-face bullying behaviors, and social desirability. The 3-factor cyber victimization experiences scale comprised threat, shared images, and personal attack. The 3-factor cyberbullying behaviors scale comprised sharing images, gossip, and personal attack. Both scales demonstrated acceptable internal consistency and convergent validity.

VIIRS validation and algorithm development efforts in coastal and inland Waters

NASA Astrophysics Data System (ADS)

Stengel, E.; Ondrusek, M.

2016-02-01

Accurate satellite ocean color measurements in coastal and inland waters are more challenging than open-ocean measurements. Complex water and atmospheric conditions can limit the utilization of remote sensing data in coastal waters where it is most needed. The Coastal Optical Characterization Experiment (COCE) is an ongoing project at NOAA/NESDIS/STAR Satellite Oceanography and Climatology Division. The primary goals of COCE are satellite ocean color validation and application development. Currently, this effort concentrates on the initialization and validation of the Joint Polar Satellite System (JPSS) VIIRS sensor using a Satlantic HyperPro II radiometer as a validation tool. A report on VIIRS performance in coastal waters will be given by presenting comparisons between in situ ground truth measurements and VIIRS retrievals made in the Chesapeake Bay, and inland waters of the Gulf of Mexico and Puerto Rico. The COCE application development effort focuses on developing new ocean color satellite remote sensing tools for monitoring relevant coastal ocean parameters. A new VIIRS total suspended matter algorithm will be presented for the Chesapeake Bay. These activities improve the utility of ocean color satellite data in monitoring and analyzing coastal and oceanic processes. Progress on these activities will be reported.

Measuring Client Experiences in Maternity Care under Change: Development of a Questionnaire Based on the WHO Responsiveness Model

PubMed Central

Scheerhagen, Marisja; van Stel, Henk F.; Birnie, Erwin; Franx, Arie; Bonsel, Gouke J.

2015-01-01

Background Maternity care is an integrated care process, which consists of different services, involves different professionals and covers different time windows. To measure performance of maternity care based on clients' experiences, we developed and validated a questionnaire. Methods and Findings We used the 8-domain WHO Responsiveness model, and previous materials to develop a self-report questionnaire. A dual study design was used for development and validation. Content validity of the ReproQ-version-0 was determined through structured interviews with 11 pregnant women (≥28 weeks), 10 women who recently had given birth (≤12 weeks), and 19 maternity care professionals. Structured interviews established the domain relevance to the women; all items were separately commented on. All Responsiveness domains were judged relevant, with Dignity and Communication ranking highest. Main missing topic was the assigned expertise of the health professional. After first adaptation, construct validity of the ReproQ-version-1 was determined through a web-based survey. Respondents were approached by maternity care organizations with different levels of integration of services of midwives and obstetricians. We sent questionnaires to 605 third trimester pregnant women (response 65%), and 810 women 6 weeks after delivery (response 55%). Construct validity was based on: response patterns; exploratory factor analysis; association of the overall score with a Visual Analogue Scale (VAS), known group comparisons. Median overall ReproQ score was 3.70 (range 1–4) showing good responsiveness. The exploratory factor analysis supported the assumed domain structure and suggested several adaptations. Correlation of the VAS rating and overall ReproQ score (antepartum, postpartum) supported validity (r = 0.56; 0.59, p<0.001 Spearman's correlation coefficient). Pre-stated group comparisons confirmed the expected difference following a good vs. adverse birth outcome. Fully integrated organizations performed slightly better (median = 3.78) than less integrated organizations (median = 3.63; p<0.001). Participation rate of women with a low educational level and/or a non-western origin was low. Conclusions The ReproQ appears suitable for assessing quality of maternity care from the clients' perspective. Recruitment of disadvantaged groups requires additional non-digital approaches. PMID:25671310

Assessment of patient's experiences across the interface between primary and secondary care: Consumer Quality Index Continuum of care.

PubMed

Berendsen, Annette J; Groenier, Klaas H; de Jong, G Majella; Meyboom-de Jong, Betty; van der Veen, Willem Jan; Dekker, Janny; de Waal, Margot W M; Schuling, Jan

2009-10-01

Development and validation of a questionnaire that measures patients' experiences of collaboration between general practitioners (GPs) and specialists. A questionnaire was developed using the method of the consumer quality index and validated in a cross-sectional study among a random sample of patients referred to medical specialists in the Netherlands. Validation included factor analysis, ascertain internal consistency, and the discriminative ability. The response rate was 65% (1404 patients). Exploratory factor analysis indicated that four domains could be distinguished (i.e. GP Approach; GP Referral; Specialist; Collaboration). Cronbach's alpha coefficients ranged from 0.51 to 0.93 indicating sufficient internal consistency to make comparison of groups of respondents possible. The Pearson correlation coefficients between the domains were <0.4, except between the domains GP Approach and GP Referral. All domains clearly produced discriminating scores for groups with different characteristics. The Consumer Quality Index (CQ-index) Continuum of Care can be a useful instrument to assess aspects of the collaboration between GPs and specialists from patients' perspective. It can be used to give feedback to both medical professionals and policy makers. Such feedback creates an opportunity for implementing specific improvements and evaluating quality improvement projects. 2009 Elsevier Ireland Ltd.

Feelings about culture scales: development, factor structure, reliability, and validity.

PubMed

Maffini, Cara S; Wong, Y Joel

2015-04-01

Although measures of cultural identity, values, and behavior exist in the multicultural psychological literature, there is currently no measure that explicitly assesses ethnic minority individuals' positive and negative affect toward culture. Therefore, we developed 2 new measures called the Feelings About Culture Scale--Ethnic Culture and Feelings About Culture Scale--Mainstream American Culture and tested their psychometric properties. In 6 studies, we piloted the measures, conducted factor analyses to clarify their factor structure, and examined reliability and validity. The factor structure revealed 2 dimensions reflecting positive and negative affect for each measure. Results provided evidence for convergent, discriminant, criterion-related, and incremental validity as well as the reliability of the scales. The Feelings About Culture Scales are the first known measures to examine both positive and negative affect toward an individual's ethnic culture and mainstream American culture. The focus on affect captures dimensions of psychological experiences that differ from cognitive and behavioral constructs often used to measure cultural orientation. These measures can serve as a valuable contribution to both research and counseling by providing insight into the nuanced affective experiences ethnic minority individuals have toward culture. (c) 2015 APA, all rights reserved).

Enabling Self-Monitoring Data Exchange in Participatory Medicine.

PubMed

Lopez-Campos, Guillermo; Ofoghi, Bahadorreza; Martin-Sanchez, Fernando

2015-01-01

The development of new methods, devices and apps for self-monitoring have enabled the extension of the application of these approaches for consumer health and research purposes. The increase in the number and variety of devices has generated a complex scenario where reporting guidelines and data exchange formats will be needed to ensure the quality of the information and the reproducibility of results of the experiments. Based on the Minimal Information for Self Monitoring Experiments (MISME) reporting guideline we have developed an XML format (MISME-ML) to facilitate data exchange for self monitoring experiments. We have also developed a sample instance to illustrate the concept and a Java MISME-ML validation tool. The implementation and adoption of these tools should contribute to the consolidation of a set of methods that ensure the reproducibility of self monitoring experiments for research purposes.

Development and user validation of driving tasks for a power wheelchair simulator.

PubMed

Archambault, Philippe S; Blackburn, Émilie; Reid, Denise; Routhier, François; Miller, William C

2017-07-01

Mobility is important for participation in daily activities and a power wheelchair (PW) can improve quality of life of individuals with mobility impairments. A virtual reality simulator may be helpful in complementing PW skills training, which is generally seen as insufficient by both clinicians and PW users. To this end, specific, ecologically valid activities, such as entering an elevator and navigating through a shopping mall crowd, have been added to the McGill wheelchair (miWe) simulator through a user-centred approach. The objective of this study was to validate the choice of simulated activities in a group of newly trained PW users. We recruited 17 new PW users, who practiced with the miWe simulator at home for two weeks. They then related their experience through the Short Feedback Questionnaire, the perceived Ease of Use Questionnaire, and semi-structured interviews. Participants in general greatly appreciated their experience with the simulator. During the interviews, this group made similar comments about the activities as our previous group of expert PW users had done. They also insisted on the importance of realism in the miWe activities, for their use in training. A PW simulator may be helpful if it supports the practice of activities in specific contexts (such as a bathroom or supermarket), to complement the basic skills training received in the clinic (such as driving forward, backward, turning, and avoiding obstacles). Implications for Rehabilitation New power wheelchair users appreciate practicing on a virtual reality simulator and find the experience useful when the simulated diving activities are realistic and ecologically valid. User-centred development can lead to simulated power wheelchair activities that adequately capture everyday driving challenges experienced in various environmental contexts.

A Shuttle Upper Atmosphere Mass Spectrometer /SUMS/ experiment

NASA Technical Reports Server (NTRS)

Blanchard, R. C.; Duckett, R. J.; Hinson, E. W.

1982-01-01

A magnetic mass spectrometer is currently being adapted to the Space Shuttle Orbiter to provide repeated high altitude atmosphere data to support in situ rarefied flow aerodynamics research, i.e., in the high velocity, low density flight regime. The experiment, called Shuttle Upper Atmosphere Mass Spectrometer (SUMS), is the first attempt to design mass spectrometer equipment for flight vehicle aerodynamic data extraction. The SUMS experiment will provide total freestream atmospheric quantitites, principally total mass density, above altitudes at which conventional pressure measurements are valid. Experiment concepts, the expected flight profile, tradeoffs in the design of the total system and flight data reduction plans are discussed. Development plans are based upon a SUMS first flight after the Orbiter initial development flights.

Using plastic instability to validate and test the strength law of a material under pressure

NASA Astrophysics Data System (ADS)

Bolis, Cyril; Counilh, Denis; Savale, Brice

2015-09-01

In dynamical experiments (pressures higher than 10 GPa, strain rate around 104-106 s-1), metals are classically described using an equation of state and a strength law which is usually set using data from compression or traction tests at low pressure (few MPa) and low strain rates (less than 103 s-1). In consequence, it needs to be extrapolated during dynamical experiments. Classical shock experiments do not allow a fine validation of the stress law due to the interaction with the equation of state. To achieve this aim, we propose to use a dedicated experiment. We started from the works of Barnes et al. (1974 and 1980) where plastic instabilities initiated by a sinusoidal perturbation at the surface of the metal develop with the pressure. We adapted this principle to a new shape of initial perturbation and realized several experiments. We will present the setup and its use on a simple material: gold. We will detail how the interpretation of the experiments, coupled with previous characterization experiments helps us to test the strength lax of this material at high pressure and high strain rate.

Validity and reliability of the robotic objective structured assessment of technical skills

PubMed Central

Siddiqui, Nazema Y.; Galloway, Michael L.; Geller, Elizabeth J.; Green, Isabel C.; Hur, Hye-Chun; Langston, Kyle; Pitter, Michael C.; Tarr, Megan E.; Martino, Martin A.

2015-01-01

Objective Objective structured assessments of technical skills (OSATS) have been developed to measure the skill of surgical trainees. Our aim was to develop an OSATS specifically for trainees learning robotic surgery. Study Design This is a multi-institutional study in eight academic training programs. We created an assessment form to evaluate robotic surgical skill through five inanimate exercises. Obstetrics/gynecology, general surgery, and urology residents, fellows, and faculty completed five robotic exercises on a standard training model. Study sessions were recorded and randomly assigned to three blinded judges who scored performance using the assessment form. Construct validity was evaluated by comparing scores between participants with different levels of surgical experience; inter- and intra-rater reliability were also assessed. Results We evaluated 83 residents, 9 fellows, and 13 faculty, totaling 105 participants; 88 (84%) were from obstetrics/gynecology. Our assessment form demonstrated construct validity, with faculty and fellows performing significantly better than residents (mean scores: 89 ± 8 faculty; 74 ± 17 fellows; 59 ± 22 residents, p<0.01). In addition, participants with more robotic console experience scored significantly higher than those with fewer prior console surgeries (p<0.01). R-OSATS demonstrated good inter-rater reliability across all five drills (mean Cronbach's α: 0.79 ± 0.02). Intra-rater reliability was also high (mean Spearman's correlation: 0.91 ± 0.11). Conclusions We developed an assessment form for robotic surgical skill that demonstrates construct validity, inter- and intra-rater reliability. When paired with standardized robotic skill drills this form may be useful to distinguish between levels of trainee performance. PMID:24807319

Workforce perceptions of hospital safety culture: development and validation of the patient safety climate in healthcare organizations survey.

PubMed

Singer, Sara; Meterko, Mark; Baker, Laurence; Gaba, David; Falwell, Alyson; Rosen, Amy

2007-10-01

To describe the development of an instrument for assessing workforce perceptions of hospital safety culture and to assess its reliability and validity. Primary data collected between March 2004 and May 2005. Personnel from 105 U.S. hospitals completed a 38-item paper and pencil survey. We received 21,496 completed questionnaires, representing a 51 percent response rate. Based on review of existing safety climate surveys, we developed a list of key topics pertinent to maintaining a culture of safety in high-reliability organizations. We developed a draft questionnaire to address these topics and pilot tested it in four preliminary studies of hospital personnel. We modified the questionnaire based on experience and respondent feedback, and distributed the revised version to 42,249 hospital workers. We randomly divided respondents into derivation and validation samples. We applied exploratory factor analysis to responses in the derivation sample. We used those results to create scales in the validation sample, which we subjected to multitrait analysis (MTA). We identified nine constructs, three organizational factors, two unit factors, three individual factors, and one additional factor. Constructs demonstrated substantial convergent and discriminant validity in the MTA. Cronbach's alpha coefficients ranged from 0.50 to 0.89. It is possible to measure key salient features of hospital safety climate using a valid and reliable 38-item survey and appropriate hospital sample sizes. This instrument may be used in further studies to better understand the impact of safety climate on patient safety outcomes.

The other side of recovery: validation of the Portuguese version of the subjective experiences of psychosis scale.

PubMed

Martins, Filipa; Soares, Sandra C; Bem-Haja, Pedro; Roque, Carolina; Madeira, Nuno

2015-10-14

The aim of this study was to develop and validate a Portuguese version of The Subjective Experiences of Psychosis Scale (SEPS) for use in Portuguese-speaking populations in order to provide a self-report instrument to assess and monitor dimensions of psychotic experiences, translating patient's perspective and experience in terms of recovery from psychosis. The sample consisted of 30 participants with psychotic disorders who had recently experienced delusions or hallucinations. The SEPS was completed along with other observer-based assessments and self-report questionnaires, such as the Brief Psychiatric Rating Scale, the Insight and Treatment Attitudes Questionnaire and the Function Assessment Short Test. Two main factors representing the positive and negative components of each subscale were identified. We obtained good internal consistency and test-retest reliability for the positive and negative components of all subscales. The subscales of SEPS correlated with observer-based assessments and self-report questionnaires. The Portuguese version of the SEPS is a useful tool in the assessment and monitoring of psychotic symptoms.

On the granular fingering instability: controlled triggering in laboratory experiments and numerical simulations

NASA Astrophysics Data System (ADS)

Vriend, Nathalie; Tsang, Jonny; Arran, Matthew; Jin, Binbin; Johnsen, Alexander

2017-11-01

When a mixture of small, smooth particles and larger, coarse particles is released on a rough inclined plane, the initial uniform front may break up in distinct fingers which elongate over time. This fingering instability is sensitive to the unique arrangement of individual particles and is driven by granular segregation (Pouliquen et al., 1997). Variability in initial conditions create significant limitations for consistent experimental and numerical validation of newly developed theoretical models (Baker et al., 2016) for finger formation. We present an experimental study using a novel tool that sets the initial fingering width of the instability. By changing this trigger width between experiments, we explore the response of the avalanche breakup to perturbations of different widths. Discrete particle simulations (using MercuryDPM, Thornton et al., 2012) are conducted under a similar setting, reproducing the variable finger width, allowing validation between experiments and numerical simulations. A good agreement between simulations and experiments is obtained, and ongoing theoretical work is briefly introduced. NMV acknowledges the Royal Society Dorothy Hodgkin Research Fellowship.

A Consensus Approach to Investigate Undergraduate Pharmacy Students’ Experience of Interprofessional Education

PubMed Central

Obara, Ilona; Paterson, Alastair; Nazar, Zachariah; Portlock, Jane; Husband, Andrew

2017-01-01

Objective. To assess the development of knowledge, attitudes, and behaviors for collaborative practice among first-year pharmacy students following completion of interprofessional education. Methods. A mixed-methods strategy was employed to detect student self-reported change in knowledge, attitudes, and behaviors. Validated survey tools were used to assess student perception and attitudes. The Nominal Group Technique (NGT) was used to capture student reflections and provide peer discussion on the individual IPE sessions. Results. The validated survey tools did not detect any change in students’ attitudes and perceptions. The NGT succeeded in providing a milieu for participating students to reflect on their IPE experiences. The peer review process allowed students to compare their initial perceptions and reactions and renew their reflections on the learning experience. Conclusion. The NGT process has provided the opportunity to assess the student experience through the reflective process that was enriched via peer discussion. Students have demonstrated more positive attitudes and behaviors toward interprofessional working through IPE. PMID:28381886

[The ethical aspects of physiological experiment].

PubMed

Al'bertin, S V

2014-01-01

A modern classification of invasive procedures developed according to International Bioethical Principles has been presented. The experimental data convincingly demonstrate that using of noninvasive approaches and techniques give a good opportunity to reduce a number of animals recruited in experiment as well as to keep the normal (not distressful) physiological functions of animals. The data presented stress that development of noninvasive techniques is closely related both to scientific and social aspects of our life, allowing the scientists to provide high validity of experimental data obtained as well as to keep themselves as a human beings.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, Wei-Yang

Foam materials are used to protect sensitive components from impact loading. In order to predict and simulate the foam performance under various loading conditions, a validated foam model is needed and the mechanical properties of foams need to be characterized. Uniaxial compression and tension tests were conducted for different densities of foams under various temperatures and loading rates. Crush stress, tensile strength, and elastic modulus were obtained. A newly developed confined compression experiment provided data for investigating the foam flow direction. A biaxial tension experiment was also developed to explore the damage surface of a rigid polyurethane foam.

Child Care Services IV: Activities That Teach, Home and Family Education: 6755.05.

ERIC Educational Resources Information Center

Ahrens, Thea

This course is designed for senior high school students interested in early childhood education and gives the Child Care Aide experience in planning and executing activities with children in group situations which reflect knowledge of their individual development. The course centers on the following concepts: play is valid, development of the…

Design, Development and Delivery of Active Learning Tools in Software Verification & Validation Education

ERIC Educational Resources Information Center

Acharya, Sushil; Manohar, Priyadarshan Anant; Wu, Peter; Maxim, Bruce; Hansen, Mary

2018-01-01

Active learning tools are critical in imparting real world experiences to the students within a classroom environment. This is important because graduates are expected to develop software that meets rigorous quality standards in functional and application domains with little to no training. However, there is a well-recognized need for the…

Development and Initial Validation of the Pain Resilience Scale.

PubMed

Slepian, P Maxwell; Ankawi, Brett; Himawan, Lina K; France, Christopher R

2016-04-01

Over the past decade, the role of positive psychology in pain experience has gained increasing attention. One such positive factor, identified as resilience, has been defined as the ability to maintain positive emotional and physical functioning despite physical or psychological adversity. Although cross-situational measures of resilience have been shown to be related to pain, it was hypothesized that a pain-specific resilience measure would serve as a stronger predictor of acute pain experience. To test this hypothesis, we conducted a series of studies to develop and validate the Pain Resilience Scale. Study 1 described exploratory and confirmatory factor analyses that support a scale with 2 distinct factors, Cognitive/Affective Positivity and Behavioral Perseverance. Study 2 showed test-retest reliability and construct validity of this new scale, including moderate positive relationships with measures of positive psychological functioning and small to moderate negative relationships with vulnerability measures such as pain catastrophizing. Finally, consistent with our initial hypothesis, study 3 showed that the Pain Resilience Scale is more strongly related to ischemic pain responses than existing measures of general resilience. Together, these studies support the predictive utility of this new pain-specific measure of resilience in the context of acute experimental pain. The Pain Resilience Scale represents a novel measure of Cognitive/Affective Positivity and Behavioral Perseverance during exposure to noxious stimuli. Construct validity is supported by expected relationships with existing pain-coping measures, and predictive validity is shown by individual differences in response to acute experimental pain. Copyright © 2016 American Pain Society. Published by Elsevier Inc. All rights reserved.

Milestone-compatible neurology resident assessments: A role for observable practice activities.

PubMed

Jones, Lyell K; Dimberg, Elliot L; Boes, Christopher J; Eggers, Scott D Z; Dodick, David W; Cutsforth-Gregory, Jeremy K; Leep Hunderfund, Andrea N; Capobianco, David J

2015-06-02

Beginning in 2014, US neurology residency programs were required to report each trainee's educational progression within 29 neurology Milestone competency domains. Trainee assessment systems will need to be adapted to inform these requirements. The primary aims of this study were to validate neurology resident assessment content using observable practice activities (OPAs) and to develop assessment formats easily translated to the Neurology Milestones. A modified Delphi technique was used to establish consensus perceptions of importance of 73 neurology OPAs among neurology educators and trainees at 3 neurology residency programs. A content validity score (CVS) was derived for each neurology OPA, with scores ≥4.0 determined in advance to indicate sufficient content validity. The mean CVS for all OPAs was 4.4 (range 3.5-5.0). Fifty-seven (78%) OPAs had a CVS ≥4.0, leaving 16 (22%) below the pre-established threshold for content validity. Trainees assigned a higher importance to individual OPAs (mean CVS 4.6) compared to faculty (mean 4.4, p = 0.016), but the effect size was small (η(2) = 0.10). There was no demonstrated effect of length of education experience on perceived importance of neurology OPAs (p = 0.23). Two sample resident assessment formats were developed, one using neurology OPAs alone and another using a combination of neurology OPAs and the Neurology Milestones. This study provides neurology training programs with content validity evidence for items to include in resident assessments, and sample assessment formats that directly translate to the Neurology Milestones. Length of education experience has little effect on perceptions of neurology OPA importance. © 2015 American Academy of Neurology.

Development of probabilistic thinking-oriented learning tools for probability materials at junior high school students

NASA Astrophysics Data System (ADS)

Sari, Dwi Ivayana; Hermanto, Didik

2017-08-01

This research is a developmental research of probabilistic thinking-oriented learning tools for probability materials at ninth grade students. This study is aimed to produce a good probabilistic thinking-oriented learning tools. The subjects were IX-A students of MTs Model Bangkalan. The stages of this development research used 4-D development model which has been modified into define, design and develop. Teaching learning tools consist of lesson plan, students' worksheet, learning teaching media and students' achievement test. The research instrument used was a sheet of learning tools validation, a sheet of teachers' activities, a sheet of students' activities, students' response questionnaire and students' achievement test. The result of those instruments were analyzed descriptively to answer research objectives. The result was teaching learning tools in which oriented to probabilistic thinking of probability at ninth grade students which has been valid. Since teaching and learning tools have been revised based on validation, and after experiment in class produced that teachers' ability in managing class was effective, students' activities were good, students' responses to the learning tools were positive and the validity, sensitivity and reliability category toward achievement test. In summary, this teaching learning tools can be used by teacher to teach probability for develop students' probabilistic thinking.

Proteomics: from hypothesis to quantitative assay on a single platform. Guidelines for developing MRM assays using ion trap mass spectrometers.

PubMed

Han, Bomie; Higgs, Richard E

2008-09-01

High-throughput HPLC-mass spectrometry (HPLC-MS) is routinely used to profile biological samples for potential protein markers of disease, drug efficacy and toxicity. The discovery technology has advanced to the point where translating hypotheses from proteomic profiling studies into clinical use is the bottleneck to realizing the full potential of these approaches. The first step in this translation is the development and analytical validation of a higher throughput assay with improved sensitivity and selectivity relative to typical profiling assays. Multiple reaction monitoring (MRM) assays are an attractive approach for this stage of biomarker development given their improved sensitivity and specificity, the speed at which the assays can be developed and the quantitative nature of the assay. While the profiling assays are performed with ion trap mass spectrometers, MRM assays are traditionally developed in quadrupole-based mass spectrometers. Development of MRM assays from the same instrument used in the profiling analysis enables a seamless and rapid transition from hypothesis generation to validation. This report provides guidelines for rapidly developing an MRM assay using the same mass spectrometry platform used for profiling experiments (typically ion traps) and reviews methodological and analytical validation considerations. The analytical validation guidelines presented are drawn from existing practices on immunological assays and are applicable to any mass spectrometry platform technology.

FIRE Science Results 1989

NASA Technical Reports Server (NTRS)

Mcdougal, David S. (Editor)

1990-01-01

FIRE (First ISCCP Regional Experiment) is a U.S. cloud-radiation research program formed in 1984 to increase the basic understanding of cirrus and marine stratocumulus cloud systems, to develop realistic parameterizations for these systems, and to validate and improve ISCCP cloud product retrievals. Presentations of results culminating the first 5 years of FIRE research activities were highlighted. The 1986 Cirrus Intensive Field Observations (IFO), the 1987 Marine Stratocumulus IFO, the Extended Time Observations (ETO), and modeling activities are described. Collaborative efforts involving the comparison of multiple data sets, incorporation of data measurements into modeling activities, validation of ISCCP cloud parameters, and development of parameterization schemes for General Circulation Models (GCMs) are described.

Observational and Modeling Studies of Clouds and the Hydrological Cycle

NASA Technical Reports Server (NTRS)

Somerville, Richard C. J.

1997-01-01

Our approach involved validating parameterizations directly against measurements from field programs, and using this validation to tune existing parameterizations and to guide the development of new ones. We have used a single-column model (SCM) to make the link between observations and parameterizations of clouds, including explicit cloud microphysics (e.g., prognostic cloud liquid water used to determine cloud radiative properties). Surface and satellite radiation measurements were used to provide an initial evaluation of the performance of the different parameterizations. The results of this evaluation will then used to develop improved cloud and cloud-radiation schemes, which were tested in GCM experiments.

Teaching "Instant Experience" with Graphical Model Validation Techniques

ERIC Educational Resources Information Center

Ekstrøm, Claus Thorn

2014-01-01

Graphical model validation techniques for linear normal models are often used to check the assumptions underlying a statistical model. We describe an approach to provide "instant experience" in looking at a graphical model validation plot, so it becomes easier to validate if any of the underlying assumptions are violated.

Development and validation of an Argentine set of facial expressions of emotion.

PubMed

Vaiman, Marcelo; Wagner, Mónica Anna; Caicedo, Estefanía; Pereno, Germán Leandro

2017-02-01

Pictures of facial expressions of emotion are used in a wide range of experiments. The last decade has seen an increase in the number of studies presenting local sets of emotion stimuli. However, only a few existing sets contain pictures of Latin Americans, despite the growing attention emotion research is receiving in this region. Here we present the development and validation of the Universidad Nacional de Cordoba, Expresiones de Emociones Faciales (UNCEEF), a Facial Action Coding System (FACS)-verified set of pictures of Argentineans expressing the six basic emotions, plus neutral expressions. FACS scores, recognition rates, Hu scores, and discrimination indices are reported. Evidence of convergent validity was obtained using the Pictures of Facial Affect in an Argentine sample. However, recognition accuracy was greater for UNCEEF. The importance of local sets of emotion pictures is discussed.

An Experimental and Numerical Study of a Supersonic Burner for CFD Model Development

NASA Technical Reports Server (NTRS)

Magnotti, G.; Cutler, A. D.

2008-01-01

A laboratory scale supersonic burner has been developed for validation of computational fluid dynamics models. Detailed numerical simulations were performed for the flow inside the combustor, and coupled with finite element thermal analysis to obtain more accurate outflow conditions. A database of nozzle exit profiles for a wide range of conditions of interest was generated to be used as boundary conditions for simulation of the external jet, or for validation of non-intrusive measurement techniques. A set of experiments was performed to validate the numerical results. In particular, temperature measurements obtained by using an infrared camera show that the computed heat transfer was larger than the measured value. Relaminarization in the convergent part of the nozzle was found to be responsible for this discrepancy, and further numerical simulations sustained this conclusion.

Validation of a novel duplex ultrasound objective structured assessment of technical skills (DUOSATS) for arterial stenosis detection.

PubMed

Jaffer, U; Singh, P; Pandey, V A; Aslam, M; Standfield, N J

2014-01-01

Duplex ultrasound facilitates bedside diagnosis and hence timely patient care. Its uptake has been hampered by training and accreditation issues. We have developed an assessment tool for Duplex arterial stenosis measurement for both simulator and patient based training. A novel assessment tool: duplex ultrasound assessment of technical skills was developed. A modified duplex ultrasound assessment of technical skills was used for simulator training. Novice, intermediate experience and expert users of duplex ultrasound were invited to participate. Participants viewed an instructional video and were allowed ample time to familiarize with the equipment. Participants' attempts were recorded and independently assessed by four experts using the modified duplex ultrasound assessment of technical skills. 'Global' assessment was also done on a four point Likert scale. Content, construct and concurrent validity as well as reliability were evaluated. Content and construct validity as well as reliability were demonstrated. The simulator had good satisfaction rating from participants: median 4; range 3-5. Receiver operator characteristic analysis has established a cut point of 22/ 34 and 25/ 40 were most appropriate for simulator and patient based assessment respectively. We have validated a novel assessment tool for duplex arterial stenosis detection. Further work is underway to establish transference validity of simulator training to improved skill in scanning patients. We have developed and validated duplex ultrasound assessment of technical skills for simulator training.

Development and psychometric testing of Holistic Clinical Assessment Tool (HCAT) for undergraduate nursing students.

PubMed

Wu, Xi Vivien; Enskär, Karin; Pua, Lay Hoon; Heng, Doreen Gek Noi; Wang, Wenru

2016-09-22

A major focus in nursing education is on the judgement of clinical performance, and it is a complex process due to the diverse nature of nursing practice. A holistic approach in assessment of competency is advocated. Difficulties in the development of valid and reliable assessment measures in nursing competency have resulted in the development of assessment instruments with an increase in face and content validity, but few studies have tested these instruments psychometrically. It is essential to develop a holistic assessment tool to meet the needs of the clinical education. The study aims to develop a Holistic Clinical Assessment Tool (HCAT) and test its psychometric properties. The HCAT was developed based on the systematic literature review and the findings of qualitative studies. An expert panel was invited to evaluate the content validity of the tool. A total of 130 final-year nursing undergraduate students were recruited to evaluate the psychometric properties (i.e. factor structure, internal consistency and test-retest reliability) of the tool. The HCAT has good content validity with content validity index of .979. The exploratory factor analysis reveals a four-factor structure of the tool. The internal consistency and test-retest reliability of the HCAT are satisfactory with Cronbach alpha ranging from .789 to .965 and Intraclass Correlation Coefficient ranging from .881 to .979 for the four subscales and total scale. HCAT has the potential to be used as a valid measure to evaluate clinical competence in nursing students, and provide specific and ongoing feedback to enhance the holistic clinical learning experience. In addition, HCAT functions as a tool for self-reflection, peer-assessment and guides preceptors in clinical teaching and assessment.

Verification and Validation of Requirements on the CEV Parachute Assembly System Using Design of Experiments

NASA Technical Reports Server (NTRS)

Schulte, Peter Z.; Moore, James W.

2011-01-01

The Crew Exploration Vehicle Parachute Assembly System (CPAS) project conducts computer simulations to verify that flight performance requirements on parachute loads and terminal rate of descent are met. Design of Experiments (DoE) provides a systematic method for variation of simulation input parameters. When implemented and interpreted correctly, a DoE study of parachute simulation tools indicates values and combinations of parameters that may cause requirement limits to be violated. This paper describes one implementation of DoE that is currently being developed by CPAS, explains how DoE results can be interpreted, and presents the results of several preliminary studies. The potential uses of DoE to validate parachute simulation models and verify requirements are also explored.

A New Generation of Crystallographic Validation Tools for the Protein Data Bank

PubMed Central

Read, Randy J.; Adams, Paul D.; Arendall, W. Bryan; Brunger, Axel T.; Emsley, Paul; Joosten, Robbie P.; Kleywegt, Gerard J.; Krissinel, Eugene B.; Lütteke, Thomas; Otwinowski, Zbyszek; Perrakis, Anastassis; Richardson, Jane S.; Sheffler, William H.; Smith, Janet L.; Tickle, Ian J.; Vriend, Gert; Zwart, Peter H.

2011-01-01

Summary This report presents the conclusions of the X-ray Validation Task Force of the worldwide Protein Data Bank (PDB). The PDB has expanded massively since current criteria for validation of deposited structures were adopted, allowing a much more sophisticated understanding of all the components of macromolecular crystals. The size of the PDB creates new opportunities to validate structures by comparison with the existing database, and the now-mandatory deposition of structure factors creates new opportunities to validate the underlying diffraction data. These developments highlighted the need for a new assessment of validation criteria. The Task Force recommends that a small set of validation data be presented in an easily understood format, relative to both the full PDB and the applicable resolution class, with greater detail available to interested users. Most importantly, we recommend that referees and editors judging the quality of structural experiments have access to a concise summary of well-established quality indicators. PMID:22000512

A new generation of crystallographic validation tools for the protein data bank.

PubMed

Read, Randy J; Adams, Paul D; Arendall, W Bryan; Brunger, Axel T; Emsley, Paul; Joosten, Robbie P; Kleywegt, Gerard J; Krissinel, Eugene B; Lütteke, Thomas; Otwinowski, Zbyszek; Perrakis, Anastassis; Richardson, Jane S; Sheffler, William H; Smith, Janet L; Tickle, Ian J; Vriend, Gert; Zwart, Peter H

2011-10-12

This report presents the conclusions of the X-ray Validation Task Force of the worldwide Protein Data Bank (PDB). The PDB has expanded massively since current criteria for validation of deposited structures were adopted, allowing a much more sophisticated understanding of all the components of macromolecular crystals. The size of the PDB creates new opportunities to validate structures by comparison with the existing database, and the now-mandatory deposition of structure factors creates new opportunities to validate the underlying diffraction data. These developments highlighted the need for a new assessment of validation criteria. The Task Force recommends that a small set of validation data be presented in an easily understood format, relative to both the full PDB and the applicable resolution class, with greater detail available to interested users. Most importantly, we recommend that referees and editors judging the quality of structural experiments have access to a concise summary of well-established quality indicators. Copyright © 2011 Elsevier Ltd. All rights reserved.

Evaluation of complementary-alternative medicine (CAM) questionnaire development for Indonesian clinical psychologists: A pilot study.

PubMed

Liem, Andrian; Newcombe, Peter A; Pohlman, Annie

2017-08-01

This study aimed to evaluate questionnaire development to measure the knowledge of Complementary-Alternative Medicine (CAM), attitudes towards CAM, CAM experiences, and CAM educational needs of clinical psychologists in Indonesia. A 26-item questionnaire was developed through an extensive literature search. Data was obtained from provisional psychologists from the Master of Professional Clinical Psychology programs at two established public universities in urban areas of Indonesia. To validate the questionnaire, panel reviews by executive members of the Indonesian Clinical Psychology Association (ICPA), experts in health psychology, and experts in public health and CAM provided their professional judgements. The self-reporting questionnaire consisted of four scales including: knowledge of CAM (6 items), attitudes towards CAM (10 items), CAM experiences (4 items), and CAM educational needs (6 items). All scales, except CAM Experiences, were assessed on a 7-point Likert scale. Sixty provisional psychologists were eligible to complete the questionnaire with a response rate of 73% (N=44). The results showed that the CAM questionnaire was reliable (Cronbach's coefficient alpha range=0.62-0.96; item-total correlation range=0.14-0.92) and demonstrated content validity. Following further psychometric evaluation, the CAM questionnaire may provide the evidence-based information to inform the education and practice of Indonesian clinical psychologists. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Use of Virtual Reality in the Study of People's Responses to Violent Incidents.

PubMed

Rovira, Aitor; Swapp, David; Spanlang, Bernhard; Slater, Mel

2009-01-01

This paper reviews experimental methods for the study of the responses of people to violence in digital media, and in particular considers the issues of internal validity and ecological validity or generalisability of results to events in the real world. Experimental methods typically involve a significant level of abstraction from reality, with participants required to carry out tasks that are far removed from violence in real life, and hence their ecological validity is questionable. On the other hand studies based on field data, while having ecological validity, cannot control multiple confounding variables that may have an impact on observed results, so that their internal validity is questionable. It is argued that immersive virtual reality may provide a unification of these two approaches. Since people tend to respond realistically to situations and events that occur in virtual reality, and since virtual reality simulations can be completely controlled for experimental purposes, studies of responses to violence within virtual reality are likely to have both ecological and internal validity. This depends on a property that we call 'plausibility' - including the fidelity of the depicted situation with prior knowledge and expectations. We illustrate this with data from a previously published experiment, a virtual reprise of Stanley Milgram's 1960s obedience experiment, and also with pilot data from a new study being developed that looks at bystander responses to violent incidents.

The Use of Virtual Reality in the Study of People's Responses to Violent Incidents

PubMed Central

Rovira, Aitor; Swapp, David; Spanlang, Bernhard; Slater, Mel

2009-01-01

This paper reviews experimental methods for the study of the responses of people to violence in digital media, and in particular considers the issues of internal validity and ecological validity or generalisability of results to events in the real world. Experimental methods typically involve a significant level of abstraction from reality, with participants required to carry out tasks that are far removed from violence in real life, and hence their ecological validity is questionable. On the other hand studies based on field data, while having ecological validity, cannot control multiple confounding variables that may have an impact on observed results, so that their internal validity is questionable. It is argued that immersive virtual reality may provide a unification of these two approaches. Since people tend to respond realistically to situations and events that occur in virtual reality, and since virtual reality simulations can be completely controlled for experimental purposes, studies of responses to violence within virtual reality are likely to have both ecological and internal validity. This depends on a property that we call ‘plausibility’ – including the fidelity of the depicted situation with prior knowledge and expectations. We illustrate this with data from a previously published experiment, a virtual reprise of Stanley Milgram's 1960s obedience experiment, and also with pilot data from a new study being developed that looks at bystander responses to violent incidents. PMID:20076762

The development of a patient-reported outcome measure for assessing nighttime symptoms of chronic obstructive pulmonary disease.

PubMed

Hareendran, Asha; Palsgrove, Andrew C; Mocarski, Michelle; Schaefer, Michael L; Setyawan, Juliana; Carson, Robyn; Make, Barry

2013-06-25

The assessment of symptoms of chronic obstructive pulmonary disease (COPD) is important for monitoring and managing the disease and for evaluating outcomes of interventions. COPD patients experience symptoms during the day and night, and symptoms experienced at night often disturb sleep. The aim of this paper is to describe methods used to develop a patient-reported outcome (PRO) instrument for evaluating nighttime symptoms of COPD, and to document evidence for the content validity of the instrument. Literature review and clinician interviews were conducted to inform discussion guides to explore patients' nighttime COPD symptom experience. Data from focus groups with COPD patients was used to develop a conceptual framework and the content of a new PRO instrument. Patient understanding of the new instrument was assessed via cognitive interviews with COPD patients. The literature review confirmed that there is no instrument with evidence of content validity currently available to assess nighttime symptoms of COPD. Additionally, the literature review and clinician interviews suggested the need to understand patients' experience of specific symptoms in order to evaluate nighttime symptoms of COPD. Analyses of patient focus group data (N = 27) supported saturation of concepts and aided in development of a conceptual framework. Items were generated using patients' terminology to collect data on concepts in the framework including the occurrence and severity of COPD symptoms, use of rescue medication at night, and nocturnal awakening. Response options were chosen to reflect concepts that were salient to patients. Subsequent cognitive interviewing with ten COPD patients demonstrated that the items, response options, recall period, and instructions were understandable, relevant, and interpreted as intended. A new PRO instrument, the Nighttime Symptoms of COPD Instrument (NiSCI), was developed with documented evidence of content validity. The NiSCI is ready for empirical testing, including item reduction and evaluation of psychometric properties.

Construct and face validity of the educational computer-based environment (ECE) assessment scenarios for basic endoneurosurgery skills.

PubMed

Cagiltay, Nergiz Ercil; Ozcelik, Erol; Sengul, Gokhan; Berker, Mustafa

2017-11-01

In neurosurgery education, there is a paradigm shift from time-based training to criterion-based model for which competency and assessment becomes very critical. Even virtual reality simulators provide alternatives to improve education and assessment in neurosurgery programs and allow for several objective assessment measures, there are not many tools for assessing the overall performance of trainees. This study aims to develop and validate a tool for assessing the overall performance of participants in a simulation-based endoneurosurgery training environment. A training program was developed in two levels: endoscopy practice and beginning surgical practice based on four scenarios. Then, three experiments were conducted with three corresponding groups of participants (Experiment 1, 45 (32 beginners, 13 experienced), Experiment 2, 53 (40 beginners, 13 experienced), and Experiment 3, 26 (14 novices, 12 intermediate) participants). The results analyzed to understand the common factors among the performance measurements of these experiments. Then, a factor capable of assessing the overall skill levels of surgical residents was extracted. Afterwards, the proposed measure was tested to estimate the experience levels of the participants. Finally, the level of realism of these educational scenarios was assessed. The factor formed by time, distance, and accuracy on simulated tasks provided an overall performance indicator. The prediction correctness was very high for the beginners than the one for experienced surgeons in Experiments 1 and 2. When non-dominant hand is used in a surgical procedure-based scenario, skill levels of surgeons can be better predicted. The results indicate that the scenarios in Experiments 1 and 2 can be used as an assessment tool for the beginners, and scenario-2 in Experiment 3 can be used as an assessment tool for intermediate and novice levels. It can be concluded that forming the balance between perceived action capacities and skills is critical for better designing and developing skill assessment surgical simulation tools.

Conference Proceedings on Validation of Computational Fluid Dynamics. Volume 2. Poster Papers Held in Lisbon, Portugal on 2-5 May 1988

DTIC Science & Technology

1988-05-01

ifforiable manpower investement. On the basis of our current experience it seems that the basic design principles are valid. The system developed will... system is operational on various computer networks, and in both industrial and in research environments. The design pri,lciples for the construction of...to a useful numerical simulation and design system for very complex configurations and flows. 7. REFERENCES 1. Bartlett G. W. , "An experimental

Designing an Agent-Based Model Using Group Model Building: Application to Food Insecurity Patterns in a U.S. Midwestern Metropolitan City.

PubMed

Koh, Keumseok; Reno, Rebecca; Hyder, Ayaz

2018-04-01

Recent advances in computing resources have increased interest in systems modeling and population health. While group model building (GMB) has been effectively applied in developing system dynamics models (SD), few studies have used GMB for developing an agent-based model (ABM). This article explores the use of a GMB approach to develop an ABM focused on food insecurity. In our GMB workshops, we modified a set of the standard GMB scripts to develop and validate an ABM in collaboration with local experts and stakeholders. Based on this experience, we learned that GMB is a useful collaborative modeling platform for modelers and community experts to address local population health issues. We also provide suggestions for increasing the use of the GMB approach to develop rigorous, useful, and validated ABMs.

Development and Validation of Measures of Secondary Science Teachers' PCK for Teaching Photosynthesis

NASA Astrophysics Data System (ADS)

Park, Soonhye; Suh, Jeekyung; Seo, Kyungwoon

2018-06-01

This paper describes procedures by which two types of measures of Pedagogical Content Knowledge (PCK) were developed and validated: (a) PCK Survey and (b) PCK Rubric. Given the topic-specificity of PCK, the measures centered on photosynthesis as taught in high school classrooms. The measures were conceptually grounded in the pentagon model of PCK and designed to measure indispensable PCK that can be applied to any teacher, in any teaching context, for the given topic. Because of the exploratory nature of the study, the measures focus on two key components of PCK: (a) knowledge of students' understanding in science and (b) knowledge of instructional strategies and representations. Both measures have established acceptable levels of reliability as determined by internal consistency and inter-rater agreement. Evidence related to content validity was gathered through expert consultations, while evidence related to construct validity was collected through analysis of think-aloud interviews and factor analyses. Issues and challenges emerging from the course of the measure development, administration, and validation are discussed with strategies for confronting them. Directions for future research are proposed in three areas: (a) relationships between PCK and teaching experiences, (b) differences in PCK between science teachers and scientists, and (c) relationships between PCK and student learning.

A rating instrument for fear of hospitalisation.

PubMed

Jankovic, Slobodan M; Antonijevic, Gordana V; Vasic, Ivana R; Zivkovic-Radojevic, Marija N; Mirkovic, Snjezana N; Nikolic, Bosko V; Opancina, Valentina D; Putnik, Srdjan S; Radoicic, Ljiljana R; Raspopovic, Katarina M; Stanojevic, Dragan R; Teofilov, Sladjana D; Tomasevic, Katarina V; Radonjic, Vesela

2018-04-01

To develop and validate a reliable instrument that can measure fear of hospitalisation experienced by outpatients. After having a diagnosis established, some patients experience sense of fear, unpleasantness and embarrassment due to the possibility to be admitted to a hospital. Currently, there is no available instrument for measuring fear of hospitalisation. Cross-sectional study for assessing reliability and validity of a questionnaire. The questionnaire with 17 items and answers according to the Likert scale was developed during two brainstorming sessions of the research team. Its reliability, validity and temporal stability were tested on the sample of 330 outpatients. The study was multicentric, involving patients from seven cities and three countries. Fear of hospitalisation scale showed satisfactory reliability, when rated both by the investigators (Cronbach's alpha .799) and by the patients themselves (Cronbach's alpha .760). It is temporally stable, and both divergent and convergent validity tests had good results. Factorial analysis revealed three domains: fear of being injured, trust to medical staff and fear of losing privacy or autonomy. This study developed new reliable and valid instrument for measuring fear of hospitalisation. Identification of patients with high level of fear of hospitalisation by this instrument should help clinicians to administer measures which may decrease fear and prevent avoidance of healthcare utilisation. © 2018 John Wiley & Sons Ltd.

Development and Validation of Measures of Secondary Science Teachers' PCK for Teaching Photosynthesis

NASA Astrophysics Data System (ADS)

Park, Soonhye; Suh, Jeekyung; Seo, Kyungwoon

2017-04-01

This paper describes procedures by which two types of measures of Pedagogical Content Knowledge (PCK) were developed and validated: (a) PCK Survey and (b) PCK Rubric. Given the topic-specificity of PCK, the measures centered on photosynthesis as taught in high school classrooms. The measures were conceptually grounded in the pentagon model of PCK and designed to measure indispensable PCK that can be applied to any teacher, in any teaching context, for the given topic. Because of the exploratory nature of the study, the measures focus on two key components of PCK: (a) knowledge of students' understanding in science and (b) knowledge of instructional strategies and representations. Both measures have established acceptable levels of reliability as determined by internal consistency and inter-rater agreement. Evidence related to content validity was gathered through expert consultations, while evidence related to construct validity was collected through analysis of think-aloud interviews and factor analyses. Issues and challenges emerging from the course of the measure development, administration, and validation are discussed with strategies for confronting them. Directions for future research are proposed in three areas: (a) relationships between PCK and teaching experiences, (b) differences in PCK between science teachers and scientists, and (c) relationships between PCK and student learning.

Development of the Assessment of Belief Conflict in Relationship-14 (ABCR-14)

PubMed Central

Kyougoku, Makoto; Teraoka, Mutsumi; Masuda, Noriko; Ooura, Mariko; Abe, Yasushi

2015-01-01

Purpose Nurses and other healthcare workers frequently experience belief conflict, one of the most important, new stress-related problems in both academic and clinical fields. Methods In this study, using a sample of 1,683 nursing practitioners, we developed The Assessment of Belief Conflict in Relationship-14 (ABCR-14), a new scale that assesses belief conflict in the healthcare field. Standard psychometric procedures were used to develop and test the scale, including a qualitative framework concept and item-pool development, item reduction, and scale development. We analyzed the psychometric properties of ABCR-14 according to entropy, polyserial correlation coefficient, exploratory factor analysis, confirmatory factor analysis, average variance extracted, Cronbach’s alpha, Pearson product-moment correlation coefficient, and multidimensional item response theory (MIRT). Results The results of the analysis supported a three-factor model consisting of 14 items. The validity and reliability of ABCR-14 was suggested by evidence from high construct validity, structural validity, hypothesis testing, internal consistency reliability, and concurrent validity. The result of the MIRT offered strong support for good item response of item slope parameters and difficulty parameters. However, the ABCR-14 Likert scale might need to be explored from the MIRT point of view. Yet, as mentioned above, there is sufficient evidence to support that ABCR-14 has high validity and reliability. Conclusion The ABCR-14 demonstrates good psychometric properties for nursing belief conflict. Further studies are recommended to confirm its application in clinical practice. PMID:26247356

Preparing Interprofessional Faculty to Be Humanistic Mentors for Medical Students: The GW-Gold Mentor Development Program.

PubMed

Blatt, Benjamin; Plack, Margaret M; Simmens, Samuel J

2018-01-01

The GW-Gold Humanistic Mentor Development Program addresses the challenge faced by medical schools to educate faculty to prepare students for humanistic practice. Grounded in Branch's Teaching Professional and Humanistic Values model, the program prepares interprofessional faculty mentoring teams in humanistic communities of practice. The teams consist of physician-psychosocial professional pairs, each mentoring a small student group in their professional development course. Through GW-Gold workshops, faculty mentors develop interprofessional humanistic communities of practice, preparing them to lead second such communities with their students. This article describes the program and its evaluation. To assess outcomes and better understand the mentor experience, we used a mixed-method validating triangulation design consisting of simultaneous collection of quantitative (mentor and student surveys) and qualitative (open-ended survey questions and focus group) data. Data were analyzed in parallel and merged at the point of interpretation, allowing for triangulation and validation of outcomes. Mentors rated the program highly, gained confidence in their humanistic skills, and received high scores from students. Three themes emerged that validated program design, confirmed outcomes, and expanded on the mentor experience: (1) Interprofessional faculty communities developed through observation, collaboration, reflection, and dialogue; (2) Humanistic mentors created safe environments for student engagement; and (3) Engaging in interprofessional humanistic communities of practice expanded mentors' personal and professional identities. Outcomes support the value of the GW-Gold program's distinctive features in preparing faculty to sustain humanism in medical education: an interprofessional approach and small communities of practice built on humanistic values.

Development and Psychometric Evaluation of the Hypoglycemia Perspectives Questionnaire in Patients with Type 2 Diabetes Mellitus.

PubMed

Kawata, Ariane K; Wilson, Hilary; Ong, Siew Hwa; Kulich, Karoly; Coyne, Karin

2016-10-01

The aim of this study was to evaluate the factor structure and psychometric characteristics of the Hypoglycemia Perspectives Questionnaire (HPQ) assessing experience and perceptions of hypoglycemia in patients with type 2 diabetes mellitus (T2DM). HPQ was administered to adults with T2DM in a clinical sample from Cyprus (HYPO-Cyprus, n = 500) and a community sample in the United States (US, n = 1257) from the 2011 US National Health and Wellness Survey. Demographic and clinical data were collected. Analysis of HPQ data from two convenience samples examined item performance, factor structure, and HPQ measurement properties (reliability, convergent validity, known-groups validity). Analyses supported three HPQ domains: symptom concern (six items), compensatory behavior (five items), and worry (five items). Internal consistency was high for all three domains (all ≥0.75), supporting reliability. Convergent validity was supported by moderate Spearman correlations between HPQ domain scores and the Audit of Diabetes-Dependent Quality of Life (ADDQoL-19) total score. Patients with recent hypoglycemia events had significantly higher HPQ scores, supporting known-group validity. HPQ may be a valid and reliable measure capturing the experience and impact of hypoglycemia and useful in clinical trials and community-based settings.

In-situ Testing of the EHT High Gain and Frequency Ultra-Stable Integrators

NASA Astrophysics Data System (ADS)

Miller, Kenneth; Ziemba, Timothy; Prager, James; Slobodov, Ilia; Lotz, Dan

2014-10-01

Eagle Harbor Technologies (EHT) has developed a long-pulse integrator that exceeds the ITER specification for integration error and pulse duration. During the Phase I program, EHT improved the RPPL short-pulse integrators, added a fast digital reset, and demonstrated that the new integrators exceed the ITER integration error and pulse duration requirements. In Phase II, EHT developed Field Programmable Gate Array (FPGA) software that allows for integrator control and real-time signal digitization and processing. In the second year of Phase II, the EHT integrator will be tested at a validation platform experiment (HIT-SI) and tokamak (DIII-D). In the Phase IIB program, EHT will continue development of the EHT integrator to reduce overall cost per channel. EHT will test lower cost components, move to surface mount components, and add an onboard Field Programmable Gate Array and data acquisition to produce a stand-alone system with lower cost per channel and increased the channel density. EHT will test the Phase IIB integrator at a validation platform experiment (HIT-SI) and tokamak (DIII-D). Work supported by the DOE under Contract Number (DE-SC0006281).

[The Questionnaire of Experiences Associated with Video games (CERV): an instrument to detect the problematic use of video games in Spanish adolescents].

PubMed

Chamarro, Andres; Carbonell, Xavier; Manresa, Josep Maria; Munoz-Miralles, Raquel; Ortega-Gonzalez, Raquel; Lopez-Morron, M Rosa; Batalla-Martinez, Carme; Toran-Monserrat, Pere

2014-01-01

The aim of this study is to validate the Video Game-Related Experiences Questionnaire (CERV in Spanish). The questionnaire consists of 17 items, developed from the CERI (Internet-Related Experiences Questionnaire - Beranuy and cols.), and assesses the problematic use of non-massive video games. It was validated for adolescents in Compulsory Secondary Education. To validate the questionnaire, a confirmatory factor analysis (CFA) and an internal consistency analysis were carried out. The factor structure shows two factors: (a) Psychological dependence and use for evasion; and (b) Negative consequences of using video games. Two cut-off points were established for people with no problems in their use of video games (NP), with potential problems in their use of video games (PP), and with serious problems in their use of video games (SP). Results show that there is higher prevalence among males and that problematic use decreases with age. The CERV seems to be a good instrument for the screening of adolescents with difficulties deriving from video game use. Further research should relate problematic video game use with difficulties in other life domains, such as the academic field.

Directed Design of Experiments for Validating Probability of Detection Capability of NDE Systems (DOEPOD)

NASA Technical Reports Server (NTRS)

Generazio, Edward R.

2015-01-01

Directed Design of Experiments for Validating Probability of Detection Capability of NDE Systems (DOEPOD) Manual v.1.2 The capability of an inspection system is established by applications of various methodologies to determine the probability of detection (POD). One accepted metric of an adequate inspection system is that there is 95% confidence that the POD is greater than 90% (90/95 POD). Design of experiments for validating probability of detection capability of nondestructive evaluation (NDE) systems (DOEPOD) is a methodology that is implemented via software to serve as a diagnostic tool providing detailed analysis of POD test data, guidance on establishing data distribution requirements, and resolving test issues. DOEPOD demands utilization of observance of occurrences. The DOEPOD capability has been developed to provide an efficient and accurate methodology that yields observed POD and confidence bounds for both Hit-Miss or signal amplitude testing. DOEPOD does not assume prescribed POD logarithmic or similar functions with assumed adequacy over a wide range of flaw sizes and inspection system technologies, so that multi-parameter curve fitting or model optimization approaches to generate a POD curve are not required. DOEPOD applications for supporting inspector qualifications is included.

Uncertainty Quantification Techniques of SCALE/TSUNAMI

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rearden, Bradley T; Mueller, Don

2011-01-01

The Standardized Computer Analysis for Licensing Evaluation (SCALE) code system developed at Oak Ridge National Laboratory (ORNL) includes Tools for Sensitivity and Uncertainty Analysis Methodology Implementation (TSUNAMI). The TSUNAMI code suite can quantify the predicted change in system responses, such as k{sub eff}, reactivity differences, or ratios of fluxes or reaction rates, due to changes in the energy-dependent, nuclide-reaction-specific cross-section data. Where uncertainties in the neutron cross-section data are available, the sensitivity of the system to the cross-section data can be applied to propagate the uncertainties in the cross-section data to an uncertainty in the system response. Uncertainty quantification ismore » useful for identifying potential sources of computational biases and highlighting parameters important to code validation. Traditional validation techniques often examine one or more average physical parameters to characterize a system and identify applicable benchmark experiments. However, with TSUNAMI correlation coefficients are developed by propagating the uncertainties in neutron cross-section data to uncertainties in the computed responses for experiments and safety applications through sensitivity coefficients. The bias in the experiments, as a function of their correlation coefficient with the intended application, is extrapolated to predict the bias and bias uncertainty in the application through trending analysis or generalized linear least squares techniques, often referred to as 'data adjustment.' Even with advanced tools to identify benchmark experiments, analysts occasionally find that the application models include some feature or material for which adequately similar benchmark experiments do not exist to support validation. For example, a criticality safety analyst may want to take credit for the presence of fission products in spent nuclear fuel. In such cases, analysts sometimes rely on 'expert judgment' to select an additional administrative margin to account for gap in the validation data or to conclude that the impact on the calculated bias and bias uncertainty is negligible. As a result of advances in computer programs and the evolution of cross-section covariance data, analysts can use the sensitivity and uncertainty analysis tools in the TSUNAMI codes to estimate the potential impact on the application-specific bias and bias uncertainty resulting from nuclides not represented in available benchmark experiments. This paper presents the application of methods described in a companion paper.« less

Application of multi-factorial design of experiments to successfully optimize immunoassays for robust measurements of therapeutic proteins.

PubMed

Ray, Chad A; Patel, Vimal; Shih, Judy; Macaraeg, Chris; Wu, Yuling; Thway, Theingi; Ma, Mark; Lee, Jean W; Desilva, Binodh

2009-02-20

Developing a process that generates robust immunoassays that can be used to support studies with tight timelines is a common challenge for bioanalytical laboratories. Design of experiments (DOEs) is a tool that has been used by many industries for the purpose of optimizing processes. The approach is capable of identifying critical factors and their interactions with a minimal number of experiments. The challenge for implementing this tool in the bioanalytical laboratory is to develop a user-friendly approach that scientists can understand and apply. We have successfully addressed these challenges by eliminating the screening design, introducing automation, and applying a simple mathematical approach for the output parameter. A modified central composite design (CCD) was applied to three ligand binding assays. The intra-plate factors selected were coating, detection antibody concentration, and streptavidin-HRP concentrations. The inter-plate factors included incubation times for each step. The objective was to maximize the logS/B (S/B) of the low standard to the blank. The maximum desirable conditions were determined using JMP 7.0. To verify the validity of the predictions, the logS/B prediction was compared against the observed logS/B during pre-study validation experiments. The three assays were optimized using the multi-factorial DOE. The total error for all three methods was less than 20% which indicated method robustness. DOE identified interactions in one of the methods. The model predictions for logS/B were within 25% of the observed pre-study validation values for all methods tested. The comparison between the CCD and hybrid screening design yielded comparable parameter estimates. The user-friendly design enables effective application of multi-factorial DOE to optimize ligand binding assays for therapeutic proteins. The approach allows for identification of interactions between factors, consistency in optimal parameter determination, and reduced method development time.

Statistical Methodologies to Integrate Experimental and Computational Research

NASA Technical Reports Server (NTRS)

Parker, P. A.; Johnson, R. T.; Montgomery, D. C.

2008-01-01

Development of advanced algorithms for simulating engine flow paths requires the integration of fundamental experiments with the validation of enhanced mathematical models. In this paper, we provide an overview of statistical methods to strategically and efficiently conduct experiments and computational model refinement. Moreover, the integration of experimental and computational research efforts is emphasized. With a statistical engineering perspective, scientific and engineering expertise is combined with statistical sciences to gain deeper insights into experimental phenomenon and code development performance; supporting the overall research objectives. The particular statistical methods discussed are design of experiments, response surface methodology, and uncertainty analysis and planning. Their application is illustrated with a coaxial free jet experiment and a turbulence model refinement investigation. Our goal is to provide an overview, focusing on concepts rather than practice, to demonstrate the benefits of using statistical methods in research and development, thereby encouraging their broader and more systematic application.

Developing rural palliative care: validating a conceptual model.

PubMed

Kelley, Mary Lou; Williams, Allison; DeMiglio, Lily; Mettam, Hilary

2011-01-01

The purpose of this research was to validate a conceptual model for developing palliative care in rural communities. This model articulates how local rural healthcare providers develop palliative care services according to four sequential phases. The model has roots in concepts of community capacity development, evolves from collaborative, generalist rural practice, and utilizes existing health services infrastructure. It addresses how rural providers manage challenges, specifically those related to: lack of resources, minimal community understanding of palliative care, health professionals' resistance, the bureaucracy of the health system, and the obstacles of providing services in rural environments. Seven semi-structured focus groups were conducted with interdisciplinary health providers in 7 rural communities in two Canadian provinces. Using a constant comparative analysis approach, focus group data were analyzed by examining participants' statements in relation to the model and comparing emerging themes in the development of rural palliative care to the elements of the model. The data validated the conceptual model as the model was able to theoretically predict and explain the experiences of the 7 rural communities that participated in the study. New emerging themes from the data elaborated existing elements in the model and informed the requirement for minor revisions. The model was validated and slightly revised, as suggested by the data. The model was confirmed as being a useful theoretical tool for conceptualizing the development of rural palliative care that is applicable in diverse rural communities.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burge, S.W.

Erosion has been identified as one of the significant design issues in fluid beds. A cooperative R&D venture of industry, research, and government organizations was recently formed to meet the industry need for a better understanding of erosion in fluid beds. Research focussed on bed hydrodynamics, which are considered to be the primary erosion mechanism. As part of this work, ANL developed an analytical model (FLUFIX) for bed hydrodynamics. Partial validation was performed using data from experiments sponsored by the research consortium. Development of a three-dimensional fluid bed hydrodynamic model was part of Asea-Babcock`s in-kind contribution to the R&D venture.more » This model, FORCE2, was developed by Babcock & Wilcox`s Research and Development Division existing B&W program and on the gas-solids modeling and was based on an existing B&W program and on the gas-solids modeling technology developed by ANL and others. FORCE2 contains many of the features needed to model plant size beds and, therefore can be used along with the erosion technology to assess metal wastage in industrial equipment. As part of the development efforts, FORCE2 was partially validated using ANL`s two-dimensional model, FLUFIX, and experimental data. Time constraints as well as the lack of good hydrodynamic data, particularly at the plant scale, prohibited a complete validation of FORCE2. This report describes this initial validation of FORCE2.« less

Threats to validity in the design and conduct of preclinical efficacy studies: a systematic review of guidelines for in vivo animal experiments.

PubMed

Henderson, Valerie C; Kimmelman, Jonathan; Fergusson, Dean; Grimshaw, Jeremy M; Hackam, Dan G

2013-01-01

The vast majority of medical interventions introduced into clinical development prove unsafe or ineffective. One prominent explanation for the dismal success rate is flawed preclinical research. We conducted a systematic review of preclinical research guidelines and organized recommendations according to the type of validity threat (internal, construct, or external) or programmatic research activity they primarily address. We searched MEDLINE, Google Scholar, Google, and the EQUATOR Network website for all preclinical guideline documents published up to April 9, 2013 that addressed the design and conduct of in vivo animal experiments aimed at supporting clinical translation. To be eligible, documents had to provide guidance on the design or execution of preclinical animal experiments and represent the aggregated consensus of four or more investigators. Data from included guidelines were independently extracted by two individuals for discrete recommendations on the design and implementation of preclinical efficacy studies. These recommendations were then organized according to the type of validity threat they addressed. A total of 2,029 citations were identified through our search strategy. From these, we identified 26 guidelines that met our eligibility criteria--most of which were directed at neurological or cerebrovascular drug development. Together, these guidelines offered 55 different recommendations. Some of the most common recommendations included performance of a power calculation to determine sample size, randomized treatment allocation, and characterization of disease phenotype in the animal model prior to experimentation. By identifying the most recurrent recommendations among preclinical guidelines, we provide a starting point for developing preclinical guidelines in other disease domains. We also provide a basis for the study and evaluation of preclinical research practice. Please see later in the article for the Editors' Summary.

Experimental Validation Plan for the Xolotl Plasma-Facing Component Simulator Using Tokamak Sample Exposures

NASA Astrophysics Data System (ADS)

Chan, V. S.; Wong, C. P. C.; McLean, A. G.; Luo, G. N.; Wirth, B. D.

2013-10-01

The Xolotl code under development by PSI-SciDAC will enhance predictive modeling capability of plasma-facing materials under burning plasma conditions. The availability and application of experimental data to compare to code-calculated observables are key requirements to validate the breadth and content of physics included in the model and ultimately gain confidence in its results. A dedicated effort has been in progress to collect and organize a) a database of relevant experiments and their publications as previously carried out at sample exposure facilities in US and Asian tokamaks (e.g., DIII-D DiMES, and EAST MAPES), b) diagnostic and surface analysis capabilities available at each device, and c) requirements for future experiments with code validation in mind. The content of this evolving database will serve as a significant resource for the plasma-material interaction (PMI) community. Work supported in part by the US Department of Energy under GA-DE-SC0008698, DE-AC52-07NA27344 and DE-AC05-00OR22725.

Autonomous rendezvous and docking: A commercial approach to on-orbit technology validation

NASA Technical Reports Server (NTRS)

Tchoryk, Peter, Jr.; Dobbs, Michael E.; Conrad, David J.; Apley, Dale J.; Whitten, Raymond P.

1991-01-01

The Space Automation and Robotics Center (SpARC), a NASA-sponsored Center for the Commercial Development of Space (CCDS), in conjunction with its corporate affiliates, is planning an on-orbit validation of autonomous rendezvous and docking (ARD) technology. The emphasis in this program is to utilize existing technology and commercially available components whenever possible. The primary subsystems that will be validated by this demonstration include GPS receivers for navigation, a video-based sensor for proximity operations, a fluid connector mechanism to demonstrate fluid resupply capability, and a compliant, single-point docking mechanism. The focus for this initial experiment will be expendable launch vehicle (ELV) based and will make use of two residual Commercial Experiment Transporter (COMET) service modules. The first COMET spacecraft will be launched in late 1992 and will serve as the target vehicle. The ARD demonstration will take place in late 1994, after the second COMET spacecraft has been launched. The service module from the second COMET will serve as the chase vehicle.

Ab initio analytical Raman intensities for periodic systems through a coupled perturbed Hartree-Fock/Kohn-Sham method in an atomic orbital basis. II. Validation and comparison with experiments

NASA Astrophysics Data System (ADS)

Maschio, Lorenzo; Kirtman, Bernard; Rérat, Michel; Orlando, Roberto; Dovesi, Roberto

2013-10-01

In this work, we validate a new, fully analytical method for calculating Raman intensities of periodic systems, developed and presented in Paper I [L. Maschio, B. Kirtman, M. Rérat, R. Orlando, and R. Dovesi, J. Chem. Phys. 139, 164101 (2013)]. Our validation of this method and its implementation in the CRYSTAL code is done through several internal checks as well as comparison with experiment. The internal checks include consistency of results when increasing the number of periodic directions (from 0D to 1D, 2D, 3D), comparison with numerical differentiation, and a test of the sum rule for derivatives of the polarizability tensor. The choice of basis set as well as the Hamiltonian is also studied. Simulated Raman spectra of α-quartz and of the UiO-66 Metal-Organic Framework are compared with the experimental data.

Reflexive Orienting in Response to Short- and Long-Duration Gaze Cues in Young, Young-Old, and Old-Old Adults

PubMed Central

Gayzur, Nora D.; Langley, Linda K.; Kelland, Chris; Wyman, Sara V.; Saville, Alyson L.; Ciernia, Annie T.; Padmanabhan, Ganesh

2013-01-01

Shifting visual focus based on the perceived gaze direction of another person is one form of joint attention. The present study investigated if this socially-relevant form of orienting is reflexive and whether it is influenced by age. Green and Woldorff (2012) argued that rapid cueing effects (faster responses to validly-cued targets than to invalidly-cued targets) were limited to conditions in which a cue overlapped in time with a target. They attributed slower responses following invalid cues to the time needed to resolve incongruent spatial information provided by the concurrently-presented cue and target. The present study examined orienting responses of young (18-31 years), young-old (60-74 years), and old-old adults (75-91 years) following uninformative central gaze cues that overlapped in time with the target (Experiment 1) or that were removed prior to target presentation (Experiment 2). When the cue and target overlapped, all three groups localized validly-cued targets faster than invalidly-cued targets, and validity effects emerged earlier for the two younger groups (at 100 ms post cue onset) than for the old-old group (at 300 ms post cue onset). With a short duration cue (Experiment 2), validity effects developed rapidly (by 100 ms) for all three groups, suggesting that validity effects resulted from reflexive orienting based on gaze cue information rather than from cue-target conflict. Thus, although old-old adults may be slow to disengage from persistent gaze cues, attention continues to be reflexively guided by gaze cues late in life. PMID:24170377

Assessing quality of maternity care in Hungary: expert validation and testing of the mother-centered prenatal care (MCPC) survey instrument.

PubMed

Rubashkin, Nicholas; Szebik, Imre; Baji, Petra; Szántó, Zsuzsa; Susánszky, Éva; Vedam, Saraswathi

2017-11-16

Instruments to assess quality of maternity care in Central and Eastern European (CEE) region are scarce, despite reports of poor doctor-patient communication, non-evidence-based care, and informal cash payments. We validated and tested an online questionnaire to study maternity care experiences among Hungarian women. Following literature review, we collated validated items and scales from two previous English-language surveys and adapted them to the Hungarian context. An expert panel assessed items for clarity and relevance on a 4-point ordinal scale. We calculated item-level Content Validation Index (CVI) scores. We designed 9 new items concerning informal cash payments, as well as 7 new "model of care" categories based on mode of payment. The final questionnaire (N = 111 items) was tested in two samples of Hungarian women, representative (N = 600) and convenience (N = 657). We conducted bivariate analysis and thematic analysis of open-ended responses. Experts rated pre-existing English-language items as clear and relevant to Hungarian women's maternity care experiences with an average CVI for included questions of 0.97. Significant differences emerged across the model of care categories in terms of informal payments, informed consent practices, and women's perceptions of autonomy. Thematic analysis (N = 1015) of women's responses identified 13 priority areas of the maternity care experience, 9 of which were addressed by the questionnaire. We developed and validated a comprehensive questionnaire that can be used to evaluate respectful maternity care, evidence-based practice, and informal cash payments in CEE region and beyond.

Construction and Validation of an Instrument to Measure Taiwanese Elementary Students' Attitudes toward Their Science Class

NASA Astrophysics Data System (ADS)

Wang, Tzu-Ling; Berlin, Donna

2010-12-01

The main purpose of this study is to develop a valid and reliable instrument for measuring the attitudes toward science class of fourth- and fifth-grade students in an Asian school culture. Specifically, the development focused on three science attitude constructs-science enjoyment, science confidence, and importance of science as related to science class experiences. A total of 265 elementary school students in Taiwan responded to the instrument developed. Data analysis indicated that the instrument exhibited satisfactory validity and reliability with the Taiwan population used. The Cronbach's alpha coefficient was 0.93 for the entire instrument indicating a satisfactory level of internal consistency. However, both principal component analysis and parallel analysis showed that the three attitude scales were not unique and should be combined and used as a general "attitudes toward science class" scale. The analysis also showed that there were no gender or grade-level differences in students' overall attitudes toward science class.

Integrated Primary Care Readiness and Behaviors Scale: Development and validation in behavioral health professionals.

PubMed

Blaney, Cerissa L; Redding, Colleen A; Paiva, Andrea L; Rossi, Joseph S; Prochaska, James O; Blissmer, Bryan; Burditt, Caitlin T; Nash, Justin M; Bayley, Keri Dotson

2018-03-01

Although integrated primary care (IPC) is growing, several barriers remain. Better understanding of behavioral health professionals' (BHPs') readiness for and engagement in IPC behaviors could improve IPC research and training. This study developed measures of IPC behaviors and stage of change. The sample included 319 licensed, practicing BHPs with a range of interests and experience with IPC. Sequential measurement development procedures, with split-half cross-validation were conducted. Exploratory principal components analyses (N = 152) and confirmatory factor analyses (N = 167) yielded a 12-item scale with 2 factors: consultation/practice management (CPM) and intervention/knowledge (IK). A higher-order Integrated Primary Care Behavior Scale (IPCBS) model showed good fit to the data, and excellent internal consistencies. The multivariate analysis of variance (MANOVA) on the IPCBS demonstrated significant large-sized differences across stage and behavior groups. The IPCBS demonstrated good psychometric properties and external validation, advancing research, education, and training for IPC practice. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Benchmark tests for a Formula SAE Student car prototyping

NASA Astrophysics Data System (ADS)

Mariasiu, Florin

2011-12-01

Aerodynamic characteristics of a vehicle are important elements in its design and construction. A low drag coefficient brings significant fuel savings and increased engine power efficiency. In designing and developing vehicles trough computer simulation process to determine the vehicles aerodynamic characteristics are using dedicated CFD (Computer Fluid Dynamics) software packages. However, the results obtained by this faster and cheaper method, are validated by experiments in wind tunnels tests, which are expensive and were complex testing equipment are used in relatively high costs. Therefore, the emergence and development of new low-cost testing methods to validate CFD simulation results would bring great economic benefits for auto vehicles prototyping process. This paper presents the initial development process of a Formula SAE Student race-car prototype using CFD simulation and also present a measurement system based on low-cost sensors through which CFD simulation results were experimentally validated. CFD software package used for simulation was Solid Works with the FloXpress add-on and experimental measurement system was built using four piezoresistive force sensors FlexiForce type.

Assessment Methodology for Process Validation Lifecycle Stage 3A.

PubMed

Sayeed-Desta, Naheed; Pazhayattil, Ajay Babu; Collins, Jordan; Chen, Shu; Ingram, Marzena; Spes, Jana

2017-07-01

The paper introduces evaluation methodologies and associated statistical approaches for process validation lifecycle Stage 3A. The assessment tools proposed can be applied to newly developed and launched small molecule as well as bio-pharma products, where substantial process and product knowledge has been gathered. The following elements may be included in Stage 3A: number of 3A batch determination; evaluation of critical material attributes, critical process parameters, critical quality attributes; in vivo in vitro correlation; estimation of inherent process variability (IPV) and PaCS index; process capability and quality dashboard (PCQd); and enhanced control strategy. US FDA guidance on Process Validation: General Principles and Practices, January 2011 encourages applying previous credible experience with suitably similar products and processes. A complete Stage 3A evaluation is a valuable resource for product development and future risk mitigation of similar products and processes. Elements of 3A assessment were developed to address industry and regulatory guidance requirements. The conclusions made provide sufficient information to make a scientific and risk-based decision on product robustness.

Chiral symmetry and nucleon structure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holstein, B.R.

1992-01-01

Recently it has been realized that significant tests of the validity of QCD are available in low energy experiments (E < 500 MeV) by exploiting the property of (broken) chiral symmetry. This technique has been highly developed in The Goldstone boson sector by the work of Gasser and Leutwyler. Application to the nucleon system is much more difficult and is now being carefully developed.

Developing and Evaluating the Culturally Engaging Campus Environments (CECE) Scale: An Examination of Content and Construct Validity

ERIC Educational Resources Information Center

Museus, Samuel D.; Zhang, Duan; Kim, Mee Joo

2016-01-01

The purpose of the current examination was to develop a scale to measure campus environments and their impact on the experiences and outcomes of diverse student populations. The Culturally Engaging Campus Environments (CECE) Scale was designed to measure the nine elements of college environments that foster success among diverse populations.…

fDOT for in vivo follow-up of tumor development in mice lungs

NASA Astrophysics Data System (ADS)

Koenig, Anne; Hervé, Lionel; Da Silva, Anabela; Dinten, Jean-Marc; Boutet, Jérôme; Berger, Michel; Josserand, Véronique; Coll, Jean-Luc; Peltié, Philippe; Rizo, Philippe

2007-07-01

This paper presents in vivo experiments conducted on cancerous mice bearing mammary murine tumors. In order to reconstruct the fluorescence yield even in highly attenuating and heterogeneous regions like lungs, we developed a fDOT reconstruction method which at first corrects the light propagation model from optical heterogeneities by using the transmitted excitation light measurements. The same approach is also designed to enable working without immersing the mouse in adaptation liquid. The 3D fluorescence map is then reconstructed from the emitted signal of fluorescence and from the corrected propagation model by an ART (Algebraic Reconstruction Technique) algorithm. The system ability to reconstruct fluorescence distribution in presence of high attenuating objects has been validated on phantoms presenting a fluorescent absorbent inclusion. A study was conducted on mice to follow up lungs at different stages of tumor development. The mice were imaged after intravenous injection to the animal of a cancer specific fluorescent marker. A control experiment was conducted in parallel on healthy mice to ensure that the multiple injections of fluorophore did not induce parasite fluorescence distribution. These results validate our system performances for studying small animal lungs tumor evolution. Detection and localization of the fluorophore fixations expresses the tumor development.

Achievement-Relevant Personality: Relations with the Big Five and Validation of an Efficient Instrument

PubMed Central

Briley, Daniel A.; Domiteaux, Matthew; Tucker-Drob, Elliot M.

2014-01-01

Many achievement-relevant personality measures (APMs) have been developed, but the interrelations among APMs or associations with the broader personality landscape are not well-known. In Study 1, 214 participants were measured on 36 APMs and a measure of the Big Five. Factor analytic results supported the convergent and discriminant validity of five latent dimensions: performance, mastery, self-doubt, effort, and intellectual investment. Conscientiousness, neuroticism, and openness to experience had the most consistent associations with APMs. We constructed a more efficient scale– the Multidimensional Achievement-Relevant Personality Scale (MAPS). In Study 2, we replicated the factor structure and external correlates of the MAPS in a sample of 359 individuals. Finally, we validated the MAPS with four indicators of academic performance and demonstrated incremental validity. PMID:24839374

Base Flow Model Validation

NASA Technical Reports Server (NTRS)

Sinha, Neeraj; Brinckman, Kevin; Jansen, Bernard; Seiner, John

2011-01-01

A method was developed of obtaining propulsive base flow data in both hot and cold jet environments, at Mach numbers and altitude of relevance to NASA launcher designs. The base flow data was used to perform computational fluid dynamics (CFD) turbulence model assessments of base flow predictive capabilities in order to provide increased confidence in base thermal and pressure load predictions obtained from computational modeling efforts. Predictive CFD analyses were used in the design of the experiments, available propulsive models were used to reduce program costs and increase success, and a wind tunnel facility was used. The data obtained allowed assessment of CFD/turbulence models in a complex flow environment, working within a building-block procedure to validation, where cold, non-reacting test data was first used for validation, followed by more complex reacting base flow validation.

Design and validation of a three-instrument toolkit for the assessment of competence in electrocardiogram rhythm recognition.

PubMed

Hernández-Padilla, José M; Granero-Molina, José; Márquez-Hernández, Verónica V; Suthers, Fiona; López-Entrambasaguas, Olga M; Fernández-Sola, Cayetano

2017-06-01

Rapid and accurate interpretation of cardiac arrhythmias by nurses has been linked with safe practice and positive patient outcomes. Although training in electrocardiogram rhythm recognition is part of most undergraduate nursing programmes, research continues to suggest that nurses and nursing students lack competence in recognising cardiac rhythms. In order to promote patient safety, nursing educators must develop valid and reliable assessment tools that allow the rigorous assessment of this competence before nursing students are allowed to practise without supervision. The aim of this study was to develop and psychometrically evaluate a toolkit to holistically assess competence in electrocardiogram rhythm recognition. Following a convenience sampling technique, 293 nursing students from a nursing faculty in a Spanish university were recruited for the study. The following three instruments were developed and psychometrically tested: an electrocardiogram knowledge assessment tool (ECG-KAT), an electrocardiogram skills assessment tool (ECG-SAT) and an electrocardiogram self-efficacy assessment tool (ECG-SES). Reliability and validity (content, criterion and construct) of these tools were meticulously examined. A high Cronbach's alpha coefficient demonstrated the excellent reliability of the instruments (ECG-KAT=0.89; ECG-SAT=0.93; ECG-SES=0.98). An excellent context validity index (scales' average content validity index>0.94) and very good criterion validity were evidenced for all the tools. Regarding construct validity, principal component analysis revealed that all items comprising the instruments contributed to measure knowledge, skills or self-efficacy in electrocardiogram rhythm recognition. Moreover, known-groups analysis showed the tools' ability to detect expected differences in competence between groups with different training experiences. The three-instrument toolkit developed showed excellent psychometric properties for measuring competence in electrocardiogram rhythm recognition.

Development of the NIH PROMIS ® Sexual Function and Satisfaction measures in patients with cancer.

PubMed

Flynn, Kathryn E; Lin, Li; Cyranowski, Jill M; Reeve, Bryce B; Reese, Jennifer Barsky; Jeffery, Diana D; Smith, Ashley Wilder; Porter, Laura S; Dombeck, Carrie B; Bruner, Deborah Watkins; Keefe, Francis J; Weinfurt, Kevin P

2013-02-01

We describe the development and validation of the Patient-Reported Outcomes Measurement Information System(®) Sexual Function and Satisfaction (PROMIS(®) SexFS; National Institutes of Health) measures, version 1.0, for cancer populations. To develop a customizable self-report measure of sexual function and satisfaction as part of the U.S. National Institutes of Health PROMIS Network. Our multidisciplinary working group followed a comprehensive protocol for developing psychometrically robust patient-reported outcome measures including qualitative (scale development) and quantitative (psychometric evaluation) development. We performed an extensive literature review, conducted 16 focus groups with cancer patients and multiple discussions with clinicians, and evaluated candidate items in cognitive testing with patients. We administered items to 819 cancer patients. Items were calibrated using item-response theory and evaluated for reliability and validity. The PROMIS SexFS measures, version 1.0, include 81 items in 11 domains: Interest in Sexual Activity, Lubrication, Vaginal Discomfort, Erectile Function, Global Satisfaction with Sex Life, Orgasm, Anal Discomfort, Therapeutic Aids, Sexual Activities, Interfering Factors, and Screener Questions. In addition to content validity (patients indicate that items cover important aspects of their experiences) and face validity (patients indicate that items measure sexual function and satisfaction), the measure shows evidence for discriminant validity (domains discriminate between groups expected to be different) and convergent validity (strong correlations between scores on PROMIS and scores on conceptually similar older measures of sexual function), as well as favorable test-retest reliability among people not expected to change (interclass correlations from two administrations of the instrument, 1 month apart). The PROMIS SexFS offers researchers a reliable and valid set of tools to measure self-reported sexual function and satisfaction among diverse men and women. The measures are customizable; researchers can select the relevant domains and items comprising those domains for their study. © 2013 International Society for Sexual Medicine.

Development of the NIH PROMIS® Sexual Function and Satisfaction Measures in Patients with Cancer

PubMed Central

Flynn, Kathryn E.; Lin, Li; Cyranowski, Jill M.; Reeve, Bryce B.; Reese, Jennifer Barsky; Jeffery, Diana D.; Smith, Ashley Wilder; Porter, Laura S.; Dombeck, Carrie B.; Bruner, Deborah Watkins; Keefe, Francis J.; Weinfurt, Kevin P.

2013-01-01

Introduction We describe the development and validation of the PROMIS Sexual Function and Satisfaction (PROMIS SexFS) measures version 1.0 for cancer populations. Aim To develop a customizable self-report measure of sexual function and satisfaction as part of the U.S. National Institutes of Health PROMIS® Network. Methods Our multidisciplinary working group followed a comprehensive protocol for developing psychometrically robust patient reported outcome (PRO) measures including qualitative (scale development) and quantitative (psychometric evaluation) development. We performed an extensive literature review, conducted 16 focus groups with cancer patients and multiple discussions with clinicians, and evaluated candidate items in cognitive testing with patients. We administered items to 819 cancer patients. Items were calibrated using item response theory and evaluated for reliability and validity. Main Outcome Measures The PROMIS Sexual Function and Satisfaction (PROMIS SexFS) measures version 1.0 include 79 items in 11 domains: interest in sexual activity, lubrication, vaginal discomfort, erectile function, global satisfaction with sex life, orgasm, anal discomfort, therapeutic aids, sexual activities, interfering factors, and screener questions. Results In addition to content validity (patients indicate that items cover important aspects of their experiences) and face validity (patients indicate that items measure sexual function and satisfaction), the measure shows evidence for discriminant validity (domains discriminate between groups expected to be different), convergent validity (strong correlations between scores on PROMIS and scores on conceptually-similar older measures of sexual function), as well as favorable test-retest reliability among people not expected to change (inter-class correlations from 2 administrations of the instrument, 1 month apart). Conclusions The PROMIS SexFS offers researchers a reliable and valid set of tools to measure self-reported sexual function and satisfaction among diverse men and women. The measures are customizable; researchers can select the relevant domains and items comprising those domains for their study. PMID:23387911

Validation of biomarkers to predict response to immunotherapy in cancer: Volume II - clinical validation and regulatory considerations.

PubMed

Dobbin, Kevin K; Cesano, Alessandra; Alvarez, John; Hawtin, Rachael; Janetzki, Sylvia; Kirsch, Ilan; Masucci, Giuseppe V; Robbins, Paul B; Selvan, Senthamil R; Streicher, Howard Z; Zhang, Jenny; Butterfield, Lisa H; Thurin, Magdalena

2016-01-01

There is growing recognition that immunotherapy is likely to significantly improve health outcomes for cancer patients in the coming years. Currently, while a subset of patients experience substantial clinical benefit in response to different immunotherapeutic approaches, the majority of patients do not but are still exposed to the significant drug toxicities. Therefore, a growing need for the development and clinical use of predictive biomarkers exists in the field of cancer immunotherapy. Predictive cancer biomarkers can be used to identify the patients who are or who are not likely to derive benefit from specific therapeutic approaches. In order to be applicable in a clinical setting, predictive biomarkers must be carefully shepherded through a step-wise, highly regulated developmental process. Volume I of this two-volume document focused on the pre-analytical and analytical phases of the biomarker development process, by providing background, examples and "good practice" recommendations. In the current Volume II, the focus is on the clinical validation, validation of clinical utility and regulatory considerations for biomarker development. Together, this two volume series is meant to provide guidance on the entire biomarker development process, with a particular focus on the unique aspects of developing immune-based biomarkers. Specifically, knowledge about the challenges to clinical validation of predictive biomarkers, which has been gained from numerous successes and failures in other contexts, will be reviewed together with statistical methodological issues related to bias and overfitting. The different trial designs used for the clinical validation of biomarkers will also be discussed, as the selection of clinical metrics and endpoints becomes critical to establish the clinical utility of the biomarker during the clinical validation phase of the biomarker development. Finally, the regulatory aspects of submission of biomarker assays to the U.S. Food and Drug Administration as well as regulatory considerations in the European Union will be covered.

Quantitative validation of carbon-fiber laminate low velocity impact simulations

DOE PAGES

English, Shawn A.; Briggs, Timothy M.; Nelson, Stacy M.

2015-09-26

Simulations of low velocity impact with a flat cylindrical indenter upon a carbon fiber fabric reinforced polymer laminate are rigorously validated. Comparison of the impact energy absorption between the model and experiment is used as the validation metric. Additionally, non-destructive evaluation, including ultrasonic scans and three-dimensional computed tomography, provide qualitative validation of the models. The simulations include delamination, matrix cracks and fiber breaks. An orthotropic damage and failure constitutive model, capable of predicting progressive damage and failure, is developed in conjunction and described. An ensemble of simulations incorporating model parameter uncertainties is used to predict a response distribution which ismore » then compared to experimental output using appropriate statistical methods. Lastly, the model form errors are exposed and corrected for use in an additional blind validation analysis. The result is a quantifiable confidence in material characterization and model physics when simulating low velocity impact in structures of interest.« less

Development of an Integrated Nozzle for a Symmetric, RBCC Launch Vehicle Configuration

NASA Technical Reports Server (NTRS)

Smith, Timothy D.; Canabal, Francisco, III; Rice, Tharen; Blaha, Bernard

2000-01-01

The development of rocket based combined cycle (RBCC) engines is highly dependent upon integrating several different modes of operation into a single system. One of the key components to develop acceptable performance levels through each mode of operation is the nozzle. It must be highly integrated to serve the expansion processes of both rocket and air-breathing modes without undue weight, drag, or complexity. The NASA GTX configuration requires a fixed geometry, altitude-compensating nozzle configuration. The initial configuration, used mainly to estimate weight and cooling requirements was a 1 So half-angle cone, which cuts a concave surface from a point within the flowpath to the vehicle trailing edge. Results of 3-D CFD calculations on this geometry are presented. To address the critical issues associated with integrated, fixed geometry, multimode nozzle development, the GTX team has initiated a series of tasks to evolve the nozzle design, and validate performance levels. An overview of these tasks is given. The first element is a design activity to develop tools for integration of efficient expansion surfaces With the existing flowpath and vehicle aft-body, and to develop a second-generation nozzle design. A preliminary result using a "streamline-tracing" technique is presented. As the nozzle design evolves, a combination of 3-D CFD analysis and experimental evaluation will be used to validate the design procedure and determine the installed performance for propulsion cycle modeling. The initial experimental effort will consist of cold-flow experiments designed to validate the general trends of the streamline-tracing methodology and anchor the CFD analysis. Experiments will also be conducted to simulate nozzle performance during each mode of operation. As the design matures, hot-fire tests will be conducted to refine performance estimates and anchor more sophisticated reacting-flow analysis.

Developing the Scholarship of Teaching through Transformative Learning

ERIC Educational Resources Information Center

Kreber, Carolin

2006-01-01

Following a cognitive-developmental perspective, the Scholarship of Teaching & Learning is understood as a process of knowledge construction whereby knowledge claims are validated through reflection on teaching experience and educational theory. These reflective processes can be documented and peer reviewed. Teaching portfolios allow for the…

Field Test of Route Planning Software for Lunar Polar Missions

NASA Astrophysics Data System (ADS)

Horchler, A. D.; Cunningham, C.; Jones, H. L.; Arnett, D.; Fang, E.; Amoroso, E.; Otten, N.; Kitchell, F.; Holst, I.; Rock, G.; Whittaker, W.

2017-10-01

A novel field test paradigm has been developed to demonstrate and validate route planning software in the stark low-angled light and sweeping shadows a rover would experience at the poles of the Moon. Software, ConOps, and test results are presented.

Numerical simulations in the development of propellant management devices

NASA Astrophysics Data System (ADS)

Gaulke, Diana; Winkelmann, Yvonne; Dreyer, Michael

Propellant management devices (PMDs) are used for positioning the propellant at the propel-lant port. It is important to provide propellant without gas bubbles. Gas bubbles can inflict cavitation and may lead to system failures in the worst case. Therefore, the reliable operation of such devices must be guaranteed. Testing these complex systems is a very intricate process. Furthermore, in most cases only tests with downscaled geometries are possible. Numerical sim-ulations are used here as an aid to optimize the tests and to predict certain results. Based on these simulations, parameters can be determined in advance and parts of the equipment can be adjusted in order to minimize the number of experiments. In return, the simulations are validated regarding the test results. Furthermore, if the accuracy of the numerical prediction is verified, then numerical simulations can be used for validating the scaling of the experiments. This presentation demonstrates some selected numerical simulations for the development of PMDs at ZARM.

Creating wavelet-based models for real-time synthesis of perceptually convincing environmental sounds

NASA Astrophysics Data System (ADS)

Miner, Nadine Elizabeth

1998-09-01

This dissertation presents a new wavelet-based method for synthesizing perceptually convincing, dynamic sounds using parameterized sound models. The sound synthesis method is applicable to a variety of applications including Virtual Reality (VR), multi-media, entertainment, and the World Wide Web (WWW). A unique contribution of this research is the modeling of the stochastic, or non-pitched, sound components. This stochastic-based modeling approach leads to perceptually compelling sound synthesis. Two preliminary studies conducted provide data on multi-sensory interaction and audio-visual synchronization timing. These results contributed to the design of the new sound synthesis method. The method uses a four-phase development process, including analysis, parameterization, synthesis and validation, to create the wavelet-based sound models. A patent is pending for this dynamic sound synthesis method, which provides perceptually-realistic, real-time sound generation. This dissertation also presents a battery of perceptual experiments developed to verify the sound synthesis results. These experiments are applicable for validation of any sound synthesis technique.

The List of Threatening Experiences: the reliability and validity of a brief life events questionnaire.

PubMed

Brugha, T S; Cragg, D

1990-07-01

During the 23 years since the original work of Holmes & Rahe, research into stressful life events on human subjects has tended towards the development of longer and more complex inventories. The List of Threatening Experiences (LTE) of Brugha et al., by virtue of its brevity, overcomes difficulties of clinical application. In a study of 50 psychiatric patients and informants, the questionnaire version of the list (LTE-Q) was shown to have high test-retest reliability, and good agreement with informant information. Concurrent validity, based on the criterion of independently rated adversity derived from a semistructured life events interview, making use of the Life Events and Difficulties Scales (LEDS) method developed by Brown & Harris, showed both high specificity and sensitivity. The LTE-Q is particularly recommended for use in psychiatric, psychological and social studies in which other intervening variables such as social support, coping, and cognitive variables are of interest, and resources do not allow for the use of extensive interview measures of stress.

Strengthening practical wisdom: mental health workers' learning and development.

PubMed

Eriksen, Kristin Ådnøy; Dahl, Hellen; Karlsson, Bengt; Arman, Maria

2014-09-01

Practical wisdom, understood as knowing how to be or act in any present situation with clients, is believed to be an essential part of the knowledge needed to be a professional mental health worker. Exploring processes of adapting, extending knowledge and refining tacit knowledge grounded in mental health workers' experiences with being in practice may bring awareness of how mental health workers reflect, learn and practice professional 'artistry'. The aim of the article was to explore mental health workers' processes of development and learning as they appeared in focus groups intended to develop practical wisdom. The main research question was 'How might the processes of development and learning contribute to developing practical wisdom in the individual as well as in the practice culture?' The design was multi-stage focus groups, and the same participants met four times. A phenomenological hermeneutical method for researching lived experience guided the analysis. Eight experienced mental health workers representing four Norwegian municipalities participated. The research context was community-based mental health services. The study was reported to Norwegian Social Data Services, and procedures for informed consent were followed. Two examples of processes of re-evaluation of experience (Association, Integration, Validation, Appropriation and Outcomes and action) were explored. The health workers had developed knowledge in previous encounters with clients. In sharing practice experiences, this knowledge was expressed and developed, and also tested and validated against the aims of practice. Discussions led to adapted and extended knowledge, and as tacit knowledge was expressed it could be used actively. Learning to reflect, being ready to be provoked and learning to endure indecisiveness may be foundational in developing practical wisdom. Openness is demanding, and changing habits of mind is difficult. Reflection on, and confrontation with, set practices are essential to building practice cultures in line with the aims of mental health services. © The Author(s) 2014.

JaCVAM-organized international validation study of the in vivo rodent alkaline comet assay for the detection of genotoxic carcinogens: I. Summary of pre-validation study results.

PubMed

Uno, Yoshifumi; Kojima, Hajime; Omori, Takashi; Corvi, Raffaella; Honma, Masamistu; Schechtman, Leonard M; Tice, Raymond R; Burlinson, Brian; Escobar, Patricia A; Kraynak, Andrew R; Nakagawa, Yuzuki; Nakajima, Madoka; Pant, Kamala; Asano, Norihide; Lovell, David; Morita, Takeshi; Ohno, Yasuo; Hayashi, Makoto

2015-07-01

The in vivo rodent alkaline comet assay (comet assay) is used internationally to investigate the in vivo genotoxic potential of test chemicals. This assay, however, has not previously been formally validated. The Japanese Center for the Validation of Alternative Methods (JaCVAM), with the cooperation of the U.S. NTP Interagency Center for the Evaluation of Alternative Toxicological Methods (NICEATM)/the Interagency Coordinating Committee on the Validation of Alternative Methods (ICCVAM), the European Centre for the Validation of Alternative Methods (ECVAM), and the Japanese Environmental Mutagen Society/Mammalian Mutagenesis Study Group (JEMS/MMS), organized an international validation study to evaluate the reliability and relevance of the assay for identifying genotoxic carcinogens, using liver and stomach as target organs. The ultimate goal of this validation effort was to establish an Organisation for Economic Co-operation and Development (OECD) test guideline. The purpose of the pre-validation studies (i.e., Phase 1 through 3), conducted in four or five laboratories with extensive comet assay experience, was to optimize the protocol to be used during the definitive validation study. Copyright © 2015 Elsevier B.V. All rights reserved.

FASTGRASS implementation in BISON and Fission gas behavior characterization in UO 2 and connection to validating MARMOT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yun, Di; Mo, Kun; Ye, Bei

2015-09-30

This activity is supported by the US Nuclear Energy Advanced Modeling and Simulation (NEAMS) Fuels Product Line (FPL). Two major accomplishments in FY 15 are summarized in this report: (1) implementation of the FASTGRASS module in the BISON code; and (2) a Xe implantation experiment for large-grained UO 2. Both BISON AND MARMOT codes have been developed by Idaho National Laboratory (INL) to enable next generation fuel performance modeling capability as part of the NEAMS Program FPL. To contribute to the development of the Moose-Bison-Marmot (MBM) code suite, we have implemented the FASTGRASS fission gas model as a module inmore » the BISON code. Based on rate theory formulations, the coupled FASTGRASS module in BISON is capable of modeling LWR oxide fuel fission gas behavior and fission gas release. In addition, we conducted a Xe implantation experiment at the Argonne Tandem Linac Accelerator System (ATLAS) in order to produce the needed UO 2 samples with desired bubble morphology. With these samples, further experiments to study the fission gas diffusivity are planned to provide validation data for the Fission Gas Release Model in MARMOT codes.« less

Workforce Perceptions of Hospital Safety Culture: Development and Validation of the Patient Safety Climate in Healthcare Organizations Survey

PubMed Central

Singer, Sara; Meterko, Mark; Baker, Laurence; Gaba, David; Falwell, Alyson; Rosen, Amy

2007-01-01

Objective To describe the development of an instrument for assessing workforce perceptions of hospital safety culture and to assess its reliability and validity. Data Sources/Study Setting Primary data collected between March 2004 and May 2005. Personnel from 105 U.S. hospitals completed a 38-item paper and pencil survey. We received 21,496 completed questionnaires, representing a 51 percent response rate. Study Design Based on review of existing safety climate surveys, we developed a list of key topics pertinent to maintaining a culture of safety in high-reliability organizations. We developed a draft questionnaire to address these topics and pilot tested it in four preliminary studies of hospital personnel. We modified the questionnaire based on experience and respondent feedback, and distributed the revised version to 42,249 hospital workers. Data Collection We randomly divided respondents into derivation and validation samples. We applied exploratory factor analysis to responses in the derivation sample. We used those results to create scales in the validation sample, which we subjected to multitrait analysis (MTA). Principal Findings We identified nine constructs, three organizational factors, two unit factors, three individual factors, and one additional factor. Constructs demonstrated substantial convergent and discriminant validity in the MTA. Cronbach's α coefficients ranged from 0.50 to 0.89. Conclusions It is possible to measure key salient features of hospital safety climate using a valid and reliable 38-item survey and appropriate hospital sample sizes. This instrument may be used in further studies to better understand the impact of safety climate on patient safety outcomes. PMID:17850530

Development of instructional manual encouraging student active learning for high school teaching on fluid mechanics through Torricelli's tank experiment

NASA Astrophysics Data System (ADS)

Apiwan, Suttinee; Puttharugsa, Chokchai; Khemmani, Supitch

2018-01-01

The purposes of this research were to help students to perform Physics laboratory by themselves and to provide guidelines for high school teacher to develop active learning on fluid mechanics by using Torricelli's tank experiment. The research was conducted as follows: 1) constructed an appropriate Torricelli's tank experiment for high school teaching and investigated the condition for maximum water falling distance. As a consequence, it was found that the distance of the falling water measured from the experiment was shorter than that obtained from the theory of ideal fluid because of the energy loss during a flow, 2) developed instructional manual for high school teaching that encourages active learning by using problem based learning (PBL) approach, which is consistent with the trend of teaching and learning in 21st century. The content validity of our instructional manual using Index of Item-objective Congruence (IOC) as evaluated by three experts was over 0.67. The manual developed was therefore qualified for classroom practice.

Initial development and preliminary validation of a new negative symptom measure: the Clinical Assessment Interview for Negative Symptoms (CAINS).

PubMed

Forbes, Courtney; Blanchard, Jack J; Bennett, Melanie; Horan, William P; Kring, Ann; Gur, Raquel

2010-12-01

As part of an ongoing scale development process, this study provides an initial examination of the psychometric properties and validity of a new interview-based negative symptom instrument, the Clinical Assessment Interview for Negative Symptoms (CAINS), in outpatients with schizophrenia or schizoaffective disorder (N = 37). The scale was designed to address limitations of existing measures and to comprehensively assess five consensus-based negative symptoms: asociality, avolition, anhedonia (consummatory and anticipatory), affective flattening, and alogia. Results indicated satisfactory internal consistency reliability for the total CAINS scale score and promising inter-rater agreement, with clear areas identified in need of improvement. Convergent validity was evident in general agreement between the CAINS and alternative negative symptom measures. Further, CAINS subscales significantly correlated with relevant self-report emotional experience measures as well as with social functioning. Discriminant validity of the CAINS was strongly supported by its small, non-significant relations with positive symptoms, general psychiatric symptoms, and depression. These preliminary data on an early beta-version of the CAINS provide initial support for this new assessment approach to negative symptoms and suggest directions for further scale development. Copyright © 2010 Elsevier B.V. All rights reserved.

The development of the Athens Emotional States Inventory (AESI): collection, validation and automatic processing of emotionally loaded sentences.

PubMed

Chaspari, Theodora; Soldatos, Constantin; Maragos, Petros

2015-01-01

The development of ecologically valid procedures for collecting reliable and unbiased emotional data towards computer interfaces with social and affective intelligence targeting patients with mental disorders. Following its development, presented with, the Athens Emotional States Inventory (AESI) proposes the design, recording and validation of an audiovisual database for five emotional states: anger, fear, joy, sadness and neutral. The items of the AESI consist of sentences each having content indicative of the corresponding emotion. Emotional content was assessed through a survey of 40 young participants with a questionnaire following the Latin square design. The emotional sentences that were correctly identified by 85% of the participants were recorded in a soundproof room with microphones and cameras. A preliminary validation of AESI is performed through automatic emotion recognition experiments from speech. The resulting database contains 696 recorded utterances in Greek language by 20 native speakers and has a total duration of approximately 28 min. Speech classification results yield accuracy up to 75.15% for automatically recognizing the emotions in AESI. These results indicate the usefulness of our approach for collecting emotional data with reliable content, balanced across classes and with reduced environmental variability.

Livingstone Model-Based Diagnosis of Earth Observing One Infusion Experiment

NASA Technical Reports Server (NTRS)

Hayden, Sandra C.; Sweet, Adam J.; Christa, Scott E.

2004-01-01

The Earth Observing One satellite, launched in November 2000, is an active earth science observation platform. This paper reports on the progress of an infusion experiment in which the Livingstone 2 Model-Based Diagnostic engine is deployed on Earth Observing One, demonstrating the capability to monitor the nominal operation of the spacecraft under command of an on-board planner, and demonstrating on-board diagnosis of spacecraft failures. Design and development of the experiment, specification and validation of diagnostic scenarios, characterization of performance results and benefits of the model- based approach are presented.

Boundary Layer Transition Experiments in Support of the Hypersonics Program

NASA Technical Reports Server (NTRS)

Berry, Scott A.; Chen, Fang-Jenq; Wilder, Michael C.; Reda, Daniel C.

2007-01-01

Two experimental boundary layer transition studies in support of fundamental hypersonics research are reviewed. The two studies are the HyBoLT flight experiment and a new ballistic range effort. Details are provided of the objectives and approach associated with each experimental program. The establishment of experimental databases from ground and flight are to provide better understanding of high-speed flows and data to validate and guide the development of simulation tools.

Control of Acoustics and Store Separation in a Cavity in Supersonic Flow

DTIC Science & Technology

2005-02-01

laser -based flow visualization experiments on the FSU cavity for different microjet pressures. The details of the experiments are given in Zhuang, et. al...developed that rigorously explains the role of leading edge microjets in cavity noise suppression and predicts the magnitude of noise reduction for a...given control input (that is the steady pressure at which the microjets are fired). The model is validated through comparison of its noise reduction

Determination of lipophilic toxins by LC/MS/MS: single-laboratory validation.

PubMed

Villar-González, Adriano; Rodríguez-Velasco, María Luisa; Gago-Martínez, Ana

2011-01-01

An LC/MS/MS method has been developed, assessed, and intralaboratory-validated for the analysis of the lipophilic toxins currently regulated by European Union legislation: okadaic acid (OA) and dinophysistoxins 1 and 2, including their ester forms; azaspiracids 1, 2, and 3; pectenotoxins 1 and 2; yessotoxin (YTX), and the analogs 45 OH-YTX, Homo YTX, and 45 OH-Homo YTX; as well as for the analysis of 13-desmetil-spirolide C. The method consists of duplicate sample extraction with methanol and direct analysis of the crude extract without further cleanup or concentration. Ester forms of OA and dinophysistoxins are detected as the parent ions after alkaline hydrolysis of the extract. The validation process of this method was performed using both fortified and naturally contaminated samples, and experiments were designed according to International Organization for Standardization, International Union of Pure and Applied Chemistry, and AOAC guidelines. With the exception of YTX in fortified samples, RSDr below 15% and RSDR were below 25%. Recovery values were between 77 and 95%, and LOQs were below 60 microg/kg. These data together with validation experiments for recovery, selectivity, robustness, traceability, and linearity, as well as uncertainty calculations, are presented in this paper.

Numerical studies and metric development for validation of magnetohydrodynamic models on the HIT-SI experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansen, C., E-mail: hansec@uw.edu; Columbia University, New York, New York 10027; Victor, B.

We present application of three scalar metrics derived from the Biorthogonal Decomposition (BD) technique to evaluate the level of agreement between macroscopic plasma dynamics in different data sets. BD decomposes large data sets, as produced by distributed diagnostic arrays, into principal mode structures without assumptions on spatial or temporal structure. These metrics have been applied to validation of the Hall-MHD model using experimental data from the Helicity Injected Torus with Steady Inductive helicity injection experiment. Each metric provides a measure of correlation between mode structures extracted from experimental data and simulations for an array of 192 surface-mounted magnetic probes. Numericalmore » validation studies have been performed using the NIMROD code, where the injectors are modeled as boundary conditions on the flux conserver, and the PSI-TET code, where the entire plasma volume is treated. Initial results from a comprehensive validation study of high performance operation with different injector frequencies are presented, illustrating application of the BD method. Using a simplified (constant, uniform density and temperature) Hall-MHD model, simulation results agree with experimental observation for two of the three defined metrics when the injectors are driven with a frequency of 14.5 kHz.« less

Beliefs about penis size: validation of a scale for men ashamed about their penis size.

PubMed

Veale, David; Eshkevari, Ertimiss; Read, Julie; Miles, Sarah; Troglia, Andrea; Phillips, Rachael; Echeverria, Lina Maria Carmona; Fiorito, Chiara; Wylie, Kevan; Muir, Gordon

2014-01-01

No measures are available for understanding beliefs in men who experience shame about the perceived size of their penis. Such a measure might be helpful for treatment planning, and measuring outcome after any psychological or physical intervention. Our aim was to validate a newly developed measure called the Beliefs about Penis Size Scale (BAPS). One hundred seventy-three male participants completed a new questionnaire consisting of 18 items to be validated and developed into the BAPS, as well as various other standardized measures. A urologist also measured actual penis size. The BAPS was validated against six psychosexual self-report questionnaires as well as penile size measurements. Exploratory factor analysis reduced the number of items in the BAPS from 18 to 10, which was best explained by one factor. The 10-item BAPS had good internal consistency and correlated significantly with measures of depression, anxiety, body image quality of life, social anxiety, erectile function, overall satisfaction, and the importance attached to penis size. The BAPS was not found to correlate with actual penis size. It was able to discriminate between those who had concerns or were dissatisfied about their penis size and those who were not. This is the first study to develop a scale for measurement of beliefs about penis size. It may be used as part of an assessment for men who experience shame about the perceived size of their penis and as an outcome measure after treatment. The BAPS measures various manifestations of masculinity and shame about their perceived penis size including internal self-evaluative beliefs; negative evaluation by others; anticipated consequences of a perceived small penis, and extreme self-consciousness. © 2013 International Society for Sexual Medicine.

Demonstrating the Alaska Ocean Observing System in Prince William Sound

NASA Astrophysics Data System (ADS)

Schoch, G. Carl; McCammon, Molly

2013-07-01

The Alaska Ocean Observing System and the Oil Spill Recovery Institute developed a demonstration project over a 5 year period in Prince William Sound. The primary goal was to develop a quasi-operational system that delivers weather and ocean information in near real time to diverse user communities. This observing system now consists of atmospheric and oceanic sensors, and a new generation of computer models to numerically simulate and forecast weather, waves, and ocean circulation. A state of the art data management system provides access to these products from one internet portal at http://www.aoos.org. The project culminated in a 2009 field experiment that evaluated the observing system and performance of the model forecasts. Observations from terrestrial weather stations and weather buoys validated atmospheric circulation forecasts. Observations from wave gages on weather buoys validated forecasts of significant wave heights and periods. There was an emphasis on validation of surface currents forecasted by the ocean circulation model for oil spill response and search and rescue applications. During the 18 day field experiment a radar array mapped surface currents and drifting buoys were deployed. Hydrographic profiles at fixed stations, and by autonomous vehicles along transects, were made to acquire measurements through the water column. Terrestrial weather stations were the most reliable and least costly to operate, and in situ ocean sensors were more costly and considerably less reliable. The radar surface current mappers were the least reliable and most costly but provided the assimilation and validation data that most improved ocean circulation forecasts. We describe the setting of Prince William Sound and the various observational platforms and forecast models of the observing system, and discuss recommendations for future development.

Bridging the Gap Between Validation and Implementation of Non-Animal Veterinary Vaccine Potency Testing Methods

PubMed Central

Dozier, Samantha; Brown, Jeffrey; Currie, Alistair

2011-01-01

Simple Summary Many vaccines are tested for quality in experiments that require the use of large numbers of animals in procedures that often cause significant pain and distress. Newer technologies have fostered the development of vaccine quality control tests that reduce or eliminate the use of animals, but the availability of these newer methods has not guaranteed their acceptance by regulators or use by manufacturers. We discuss a strategic approach that has been used to assess and ultimately increase the use of non-animal vaccine quality tests in the U.S. and U.K. Abstract In recent years, technologically advanced high-throughput techniques have been developed that replace, reduce or refine animal use in vaccine quality control tests. Following validation, these tests are slowly being accepted for use by international regulatory authorities. Because regulatory acceptance itself has not guaranteed that approved humane methods are adopted by manufacturers, various organizations have sought to foster the preferential use of validated non-animal methods by interfacing with industry and regulatory authorities. After noticing this gap between regulation and uptake by industry, we began developing a paradigm that seeks to narrow the gap and quicken implementation of new replacement, refinement or reduction guidance. A systematic analysis of our experience in promoting the transparent implementation of validated non-animal vaccine potency assays has led to the refinement of our paradigmatic process, presented here, by which interested parties can assess the local regulatory acceptance of methods that reduce animal use and integrate them into quality control testing protocols, or ensure the elimination of peripheral barriers to their use, particularly for potency and other tests carried out on production batches. PMID:26486625

Development of flight experiments for remote measurement of pollution

NASA Technical Reports Server (NTRS)

Keafer, L. S., Jr.; Kopia, L. P.

1973-01-01

The status as of February 1973 of several NASA-sponsored development projects is reported concerning flight experiments for remote measurement of pollution. Eight passive multispectral instruments for remotely sensing air and water pollutants are described, as well as two active (laser radar) measuring techniques. These techniques are expected to add some new dimensions to the remote sensing of water quality, oceanographic parameters, and earth resources. Multiple applications in these fields are generally possible. Successful completion of the flight demonstration tests and comparisons with simultaneously obtained surface truth measurements may establish these techniques as valid water quality monitoring tools.

LWS/SET Technology Experiment Carrier

NASA Technical Reports Server (NTRS)

Sherman, Barry; Giffin, Geoff

2002-01-01

This paper examines the approach taken to building a low-cost, modular spacecraft bus that can be used to support a variety of technology experiments in different space environments. It describes the techniques used and design drivers considered to ensure experiment independence from as yet selected host spacecraft. It describes the technology experiment carriers that will support NASA's Living With a Star Space Environment Testbed space missions. NASA has initiated the Living With a Star (LWS) Program to develop a better scientific understanding to address the aspects of the connected Sun-Earth system that affect life and society. A principal goal of the program is to bridge the gap between science, engineering, and user application communities. The Space Environment Testbed (SET) Project is one element of LWS. The Project will enable future science, operational, and commercial objectives in space and atmospheric environments by improving engineering approaches to the accommodation and/or mitigation of the effects of solar variability on technological systems. The SET Project is highly budget constrained and must seek to take advantage of as yet undetermined partnering opportunities for access to space. SET will conduct technology validation experiments hosted on available flight opportunities. The SET Testbeds will be developed in a manner that minimizes the requirements for accommodation, and will be flown as flight opportunities become available. To access the widest range of flight opportunities, two key development requirements are to maintain flexibility with respect to accommodation constraints and to have the capability to respond quickly to flight opportunities. Experiments, already developed to the technology readiness level of needing flight validation in the variable Sun-Earth environment, will be selected on the basis of the need for the subject technology, readiness for flight, need for flight resources and particular orbit. Experiments will be accumulated by the Project and manifested for specific flight opportunities as they become available. The SET Carrier is designed to present a standard set of interfaces to SET technology experiments and to be modular and flexible enough to interface to a variety of possible host spacecraft. The Carrier will have core components and mission unique components. Once the core carrier elements have been developed, only the mission unique components need to be defined and developed for any particular mission. This approach will minimize the mission specific cost and development schedule for a given flight opportunity. The standard set of interfaces provided by SET to experiments allows them to be developed independent of the particulars of a host spacecraft. The Carrier will provide the power, communication, and the necessary monitoring features to operate experiments. The Carrier will also provide all of the mechanical assemblies and harnesses required to adapt experiments to a particular host. Experiments may be hosted locally with the Carrier or remotely on the host spacecraft. The Carrier design will allow a single Carrier to support a variable number of experiments and will include features that support the ability to incrementally add experiments without disturbing the core architecture.

Validation of model predictions of pore-scale fluid distributions during two-phase flow

NASA Astrophysics Data System (ADS)

Bultreys, Tom; Lin, Qingyang; Gao, Ying; Raeini, Ali Q.; AlRatrout, Ahmed; Bijeljic, Branko; Blunt, Martin J.

2018-05-01

Pore-scale two-phase flow modeling is an important technology to study a rock's relative permeability behavior. To investigate if these models are predictive, the calculated pore-scale fluid distributions which determine the relative permeability need to be validated. In this work, we introduce a methodology to quantitatively compare models to experimental fluid distributions in flow experiments visualized with microcomputed tomography. First, we analyzed five repeated drainage-imbibition experiments on a single sample. In these experiments, the exact fluid distributions were not fully repeatable on a pore-by-pore basis, while the global properties of the fluid distribution were. Then two fractional flow experiments were used to validate a quasistatic pore network model. The model correctly predicted the fluid present in more than 75% of pores and throats in drainage and imbibition. To quantify what this means for the relevant global properties of the fluid distribution, we compare the main flow paths and the connectivity across the different pore sizes in the modeled and experimental fluid distributions. These essential topology characteristics matched well for drainage simulations, but not for imbibition. This suggests that the pore-filling rules in the network model we used need to be improved to make reliable predictions of imbibition. The presented analysis illustrates the potential of our methodology to systematically and robustly test two-phase flow models to aid in model development and calibration.

SATS HVO Concept Validation Experiment

NASA Technical Reports Server (NTRS)

Consiglio, Maria; Williams, Daniel; Murdoch, Jennifer; Adams, Catherine

2005-01-01

A human-in-the-loop simulation experiment was conducted at the NASA Langley Research Center s (LaRC) Air Traffic Operations Lab (ATOL) in an effort to comprehensively validate tools and procedures intended to enable the Small Aircraft Transportation System, Higher Volume Operations (SATS HVO) concept of operations. The SATS HVO procedures were developed to increase the rate of operations at non-towered, non-radar airports in near all-weather conditions. A key element of the design is the establishment of a volume of airspace around designated airports where pilots accept responsibility for self-separation. Flights operating at these airports, are given approach sequencing information computed by a ground based automated system. The SATS HVO validation experiment was conducted in the ATOL during the spring of 2004 in order to determine if a pilot can safely and proficiently fly an airplane while performing SATS HVO procedures. Comparative measures of flight path error, perceived workload and situation awareness were obtained for two types of scenarios. Baseline scenarios were representative of today s system utilizing procedure separation, where air traffic control grants one approach or departure clearance at a time. SATS HVO scenarios represented approaches and departure procedures as described in the SATS HVO concept of operations. Results from the experiment indicate that low time pilots were able to fly SATS HVO procedures and maintain self-separation as safely and proficiently as flying today's procedures.

Computational Acoustic Beamforming for Noise Source Identification for Small Wind Turbines.

PubMed

Ma, Ping; Lien, Fue-Sang; Yee, Eugene

2017-01-01

This paper develops a computational acoustic beamforming (CAB) methodology for identification of sources of small wind turbine noise. This methodology is validated using the case of the NACA 0012 airfoil trailing edge noise. For this validation case, the predicted acoustic maps were in excellent conformance with the results of the measurements obtained from the acoustic beamforming experiment. Following this validation study, the CAB methodology was applied to the identification of noise sources generated by a commercial small wind turbine. The simulated acoustic maps revealed that the blade tower interaction and the wind turbine nacelle were the two primary mechanisms for sound generation for this small wind turbine at frequencies between 100 and 630 Hz.

High-fidelity Simulation of Jet Noise from Rectangular Nozzles . [Large Eddy Simulation (LES) Model for Noise Reduction in Advanced Jet Engines and Automobiles

NASA Technical Reports Server (NTRS)

Sinha, Neeraj

2014-01-01

This Phase II project validated a state-of-the-art LES model, coupled with a Ffowcs Williams-Hawkings (FW-H) far-field acoustic solver, to support the development of advanced engine concepts. These concepts include innovative flow control strategies to attenuate jet noise emissions. The end-to-end LES/ FW-H noise prediction model was demonstrated and validated by applying it to rectangular nozzle designs with a high aspect ratio. The model also was validated against acoustic and flow-field data from a realistic jet-pylon experiment, thereby significantly advancing the state of the art for LES.

Validation Database Based Thermal Analysis of an Advanced RPS Concept

NASA Technical Reports Server (NTRS)

Balint, Tibor S.; Emis, Nickolas D.

2006-01-01

Advanced RPS concepts can be conceived, designed and assessed using high-end computational analysis tools. These predictions may provide an initial insight into the potential performance of these models, but verification and validation are necessary and required steps to gain confidence in the numerical analysis results. This paper discusses the findings from a numerical validation exercise for a small advanced RPS concept, based on a thermal analysis methodology developed at JPL and on a validation database obtained from experiments performed at Oregon State University. Both the numerical and experimental configurations utilized a single GPHS module enabled design, resembling a Mod-RTG concept. The analysis focused on operating and environmental conditions during the storage phase only. This validation exercise helped to refine key thermal analysis and modeling parameters, such as heat transfer coefficients, and conductivity and radiation heat transfer values. Improved understanding of the Mod-RTG concept through validation of the thermal model allows for future improvements to this power system concept.

PIV Validation of 3D Multicomponent Model for Cold Spray Within Nitrogen and Helium Supersonic Flow Field

NASA Astrophysics Data System (ADS)

Faizan-Ur-Rab, M.; Zahiri, S. H.; Masood, S. H.; Jahedi, M.; Nagarajah, R.

2017-06-01

This study presents the validation of a developed three-dimensional multicomponent model for cold spray process using two particle image velocimetry (PIV) experiments. The k- ɛ type 3D model developed for spherical titanium particles was validated with the measured titanium particle velocity within a nitrogen and helium supersonic jet. The 3D model predicted lower values of particle velocity than the PIV experimental study that used irregularly shaped titanium particles. The results of the 3D model were consistent with the PIV experiment that used spherical titanium powder. The 3D model simulation of particle velocity within the helium and nitrogen jet was coupled with an estimation of titanium particle temperature. This was achieved with the consideration of the fact that cold spray particle temperature is difficult and expensive to measure due to considerably lower temperature of particles than thermal spray. The model predicted an interesting pattern of particle size distribution with respect to the location of impact with a concentration of finer particles close to the jet center. It is believed that the 3D model outcomes for particle velocity, temperature and location could be a useful tool to optimize system design, deposition process and mechanical properties of the additively manufactured cold spray structures.

Development, validation and operating room-transfer of a six-step laparoscopic training program for the vesicourethral anastomosis.

PubMed

Klein, Jan; Teber, Dogu; Frede, Tom; Stock, Christian; Hruza, Marcel; Gözen, Ali; Seemann, Othmar; Schulze, Michael; Rassweiler, Jens

2013-03-01

Development and full validation of a laparoscopic training program for stepwise learning of a reproducible application of a standardized laparoscopic anastomosis technique and integration into the clinical course. The training of vesicourethral anastomosis (VUA) was divided into six simple standardized steps. To fix the objective criteria, four experienced surgeons performed the stepwise training protocol. Thirty-eight participants with no previous laparoscopic experience were investigated in their training performance. The times needed to manage each training step and the total training time were recorded. The integration into the clinical course was investigated. The training results and the corresponding steps during laparoscopic radical prostatectomy (LRP) were analyzed. Data analysis of corresponding operating room (OR) sections of 793 LRP was performed. Based on the validity, criteria were determined. In the laboratory section, a significant reduction of OR time for every step was seen in all participants. Coordination: 62%; longitudinal incision: 52%; inverted U-shape incision: 43%; plexus: 47%. Anastomosis catheter model: 38%. VUA: 38%. The laboratory section required a total time of 29 hours (minimum: 16 hours; maximum: 42 hours). All participants had shorter execution times in the laboratory than under real conditions. The best match was found within the VUA model. To perform an anastomosis under real conditions, 25% more time was needed. By using the training protocol, the performance of the VUA is comparable to that of an surgeon with experience of about 50 laparoscopic VUA. Data analysis proved content, construct, and prognostic validity. The use of stepwise training approaches enables a surgeon to learn and reproduce complex reconstructive surgical tasks: eg, the VUA in a safe environment. The validity of the designed system is given at all levels and should be used as a standard in the clinical surgical training in laparoscopic reconstructive urology.

Approaches to Validate and Manipulate RNA Targets with Small Molecules in Cells.

PubMed

Childs-Disney, Jessica L; Disney, Matthew D

2016-01-01

RNA has become an increasingly important target for therapeutic interventions and for chemical probes that dissect and manipulate its cellular function. Emerging targets include human RNAs that have been shown to directly cause cancer, metabolic disorders, and genetic disease. In this review, we describe various routes to obtain bioactive compounds that target RNA, with a particular emphasis on the development of small molecules. We use these cases to describe approaches that are being developed for target validation, which include target-directed cleavage, classic pull-down experiments, and covalent cross-linking. Thus, tools are available to design small molecules to target RNA and to identify the cellular RNAs that are their targets.

Hybrid Particle-Element Simulation of Impact on Composite Orbital Debris Shields

NASA Technical Reports Server (NTRS)

Fahrenthold, Eric P.

2004-01-01

This report describes the development of new numerical methods and new constitutive models for the simulation of hypervelocity impact effects on spacecraft. The research has included parallel implementation of the numerical methods and material models developed under the project. Validation work has included both one dimensional simulations, for comparison with exact solutions, and three dimensional simulations of published hypervelocity impact experiments. The validated formulations have been applied to simulate impact effects in a velocity and kinetic energy regime outside the capabilities of current experimental methods. The research results presented here allow for the expanded use of numerical simulation, as a complement to experimental work, in future design of spacecraft for hypervelocity impact effects.

Methodology for turbulence code validation: Quantification of simulation-experiment agreement and application to the TORPEX experiment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ricci, Paolo; Theiler, C.; Fasoli, A.

A methodology for plasma turbulence code validation is discussed, focusing on quantitative assessment of the agreement between experiments and simulations. The present work extends the analysis carried out in a previous paper [P. Ricci et al., Phys. Plasmas 16, 055703 (2009)] where the validation observables were introduced. Here, it is discussed how to quantify the agreement between experiments and simulations with respect to each observable, how to define a metric to evaluate this agreement globally, and - finally - how to assess the quality of a validation procedure. The methodology is then applied to the simulation of the basic plasmamore » physics experiment TORPEX [A. Fasoli et al., Phys. Plasmas 13, 055902 (2006)], considering both two-dimensional and three-dimensional simulation models.« less

Validation of the Retinal Detachment after Open Globe Injury (RD-OGI) Score as an Effective Tool for Predicting Retinal Detachment.

PubMed

Brodowska, Katarzyna; Stryjewski, Tomasz P; Papavasileiou, Evangelia; Chee, Yewlin E; Eliott, Dean

2017-05-01

The Retinal Detachment after Open Globe Injury (RD-OGI) Score is a clinical prediction model that was developed at the Massachusetts Eye and Ear Infirmary to predict the risk of retinal detachment (RD) after open globe injury (OGI). This study sought to validate the RD-OGI Score in an independent cohort of patients. Retrospective cohort study. The predictive value of the RD-OGI Score was evaluated by comparing the original RD-OGI Scores of 893 eyes with OGI that presented between 1999 and 2011 (the derivation cohort) with 184 eyes with OGI that presented from January 1, 2012, to January 31, 2014 (the validation cohort). Three risk classes (low, moderate, and high) were created and logistic regression was undertaken to evaluate the optimal predictive value of the RD-OGI Score. A Kaplan-Meier survival analysis evaluated survival experience between the risk classes. Time to RD. At 1 year after OGI, 255 eyes (29%) in the derivation cohort and 66 eyes (36%) in the validation cohort were diagnosed with an RD. At 1 year, the low risk class (RD-OGI Scores 0-2) had a 3% detachment rate in the derivation cohort and a 0% detachment rate in the validation cohort, the moderate risk class (RD-OGI Scores 2.5-4.5) had a 29% detachment rate in the derivation cohort and a 35% detachment rate in the validation cohort, and the high risk class (RD-OGI scores 5-7.5) had a 73% detachment rate in the derivation cohort and an 86% detachment rate in the validation cohort. Regression modeling revealed the RD-OGI to be highly discriminative, especially 30 days after injury, with an area under the receiver operating characteristic curve of 0.939 in the validation cohort. Survival experience was significantly different depending upon the risk class (P < 0.0001, log-rank chi-square). The RD-OGI Score can reliably predict the future risk of developing an RD based on clinical variables that are present at the time of the initial evaluation after OGI. Copyright © 2017 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.

Development and validation of a Malawian version of the primary care assessment tool.

PubMed

Dullie, Luckson; Meland, Eivind; Hetlevik, Øystein; Mildestvedt, Thomas; Gjesdal, Sturla

2018-05-16

Malawi does not have validated tools for assessing primary care performance from patients' experience. The aim of this study was to develop a Malawian version of Primary Care Assessment Tool (PCAT-Mw) and to evaluate its reliability and validity in the assessment of the core primary care dimensions from adult patients' perspective in Malawi. A team of experts assessed the South African version of the primary care assessment tool (ZA-PCAT) for face and content validity. The adapted questionnaire underwent forward and backward translation and a pilot study. The tool was then used in an interviewer administered cross-sectional survey in Neno district, Malawi, to test validity and reliability. Exploratory factor analysis was performed on a random half of the sample to evaluate internal consistency, reliability and construct validity of items and scales. The identified constructs were then tested with confirmatory factor analysis. Likert scale assumption testing and descriptive statistics were done on the final factor structure. The PCAT-Mw was further tested for intra-rater and inter-rater reliability. From the responses of 631 patients, a 29-item PCAT-Mw was constructed comprising seven multi-item scales, representing five primary care dimensions (first contact, continuity, comprehensiveness, coordination and community orientation). All the seven scales achieved good internal consistency, item-total correlations and construct validity. Cronbach's alpha coefficient ranged from 0.66 to 0.91. A satisfactory goodness of fit model was achieved (GFI = 0.90, CFI = 0.91, RMSEA = 0.05, PCLOSE = 0.65). The full range of possible scores was observed for all scales. Scaling assumptions tests were achieved for all except the two comprehensiveness scales. Intra-class correlation coefficient (ICC) was 0.90 (n = 44, 95% CI 0.81-0.94, p < 0.001) for intra-rater reliability and 0.84 (n = 42, 95% CI 0.71-0.96, p < 0.001) for inter-rater reliability. Comprehensive metric analyses supported the reliability and validity of PCAT-Mw in assessing the core concepts of primary care from adult patients' experience. This tool could be used for health service research in primary care in Malawi.

Numerical and Experimental Validation of a New Damage Initiation Criterion

NASA Astrophysics Data System (ADS)

Sadhinoch, M.; Atzema, E. H.; Perdahcioglu, E. S.; van den Boogaard, A. H.

2017-09-01

Most commercial finite element software packages, like Abaqus, have a built-in coupled damage model where a damage evolution needs to be defined in terms of a single fracture energy value for all stress states. The Johnson-Cook criterion has been modified to be Lode parameter dependent and this Modified Johnson-Cook (MJC) criterion is used as a Damage Initiation Surface (DIS) in combination with the built-in Abaqus ductile damage model. An exponential damage evolution law has been used with a single fracture energy value. Ultimately, the simulated force-displacement curves are compared with experiments to validate the MJC criterion. 7 out of 9 fracture experiments were predicted accurately. The limitations and accuracy of the failure predictions of the newly developed damage initiation criterion will be discussed shortly.

Decoding Spontaneous Emotional States in the Human Brain

PubMed Central

Kragel, Philip A.; Knodt, Annchen R.; Hariri, Ahmad R.; LaBar, Kevin S.

2016-01-01

Pattern classification of human brain activity provides unique insight into the neural underpinnings of diverse mental states. These multivariate tools have recently been used within the field of affective neuroscience to classify distributed patterns of brain activation evoked during emotion induction procedures. Here we assess whether neural models developed to discriminate among distinct emotion categories exhibit predictive validity in the absence of exteroceptive emotional stimulation. In two experiments, we show that spontaneous fluctuations in human resting-state brain activity can be decoded into categories of experience delineating unique emotional states that exhibit spatiotemporal coherence, covary with individual differences in mood and personality traits, and predict on-line, self-reported feelings. These findings validate objective, brain-based models of emotion and show how emotional states dynamically emerge from the activity of separable neural systems. PMID:27627738

NASA mobile satellite program

NASA Technical Reports Server (NTRS)

Knouse, G.; Weber, W.

1985-01-01

A three phase development program for ground and space segment technologies which will enhance and enable the second and third generation mobile satellite systems (MSS) is outlined. Phase 1, called the Mobile Satellite Experiment (MSAT-X), is directed toward the development of ground segment technology needed for future MSS generations. Technology validation and preoperational experiments with other government agencies will be carried out during the two year period following launch. The satellite channel capacity needed to carry out these experiments will be obtained from industry under a barter type agreement in exchange for NASA provided launch services. Phase 2 will develop and flight test the multibeam spacecraft antenna technology needed to obtain substantial frequency reuse for second generation commercial systems. Industry will provide the antenna, and NASA will fly it on the Shuttle and test it in orbit. Phase 3 is similar to Phase 2 but will develop an even larger multibeam antenna and test it on the space station.

NASA mobile satellite program

NASA Astrophysics Data System (ADS)

Knouse, G.; Weber, W.

1985-04-01

A three phase development program for ground and space segment technologies which will enhance and enable the second and third generation mobile satellite systems (MSS) is outlined. Phase 1, called the Mobile Satellite Experiment (MSAT-X), is directed toward the development of ground segment technology needed for future MSS generations. Technology validation and preoperational experiments with other government agencies will be carried out during the two year period following launch. The satellite channel capacity needed to carry out these experiments will be obtained from industry under a barter type agreement in exchange for NASA provided launch services. Phase 2 will develop and flight test the multibeam spacecraft antenna technology needed to obtain substantial frequency reuse for second generation commercial systems. Industry will provide the antenna, and NASA will fly it on the Shuttle and test it in orbit. Phase 3 is similar to Phase 2 but will develop an even larger multibeam antenna and test it on the space station.

Non-Invasive Measurement of Adrenocortical Activity in Blue-Fronted Parrots (Amazona aestiva, Linnaeus, 1758)

PubMed Central

Ferreira, João C. P.; Fujihara, Caroline J.; Fruhvald, Erika; Trevisol, Eduardo; Destro, Flavia C.; Teixeira, Carlos R.; Pantoja, José C. F.; Schmidt, Elizabeth M. S.; Palme, Rupert

2015-01-01

Parrots kept in zoos and private households often develop psychological and behavioural disorders. Despite knowing that such disorders have a multifactorial aetiology and that chronic stress is involved, little is known about their development mainly due to a poor understanding of the parrots’ physiology and the lack of validated methods to measure stress in these species. In birds, blood corticosterone concentrations provide information about adrenocortical activity. However, blood sampling techniques are difficult, highly invasive and inappropriate to investigate stressful situations and welfare conditions. Thus, a non-invasive method to measure steroid hormones is critically needed. Aiming to perform a physiological validation of a cortisone enzyme immunoassay (EIA) to measure glucocorticoid metabolites (GCM) in droppings of 24 Blue-fronted parrots (Amazona aestiva), two experiments were designed. During the experiments all droppings were collected at 3-h intervals. Initially, birds were sampled for 24 h (experiment 1) and one week later assigned to four different treatments (experiment 2): Control (undisturbed), Saline (0.2 mL of 0.9% NaCl IM), Dexamethasone (1 mg/kg IM) and Adrenocorticotropic hormone (ACTH; 25 IU IM). Treatments (always one week apart) were applied to all animals in a cross-over study design. A daily rhythm pattern in GCM excretion was detected but there were no sex differences (first experiment). Saline and dexamethasone treatments had no effect on GCM (not different from control concentrations). Following ACTH injection, GCM concentration increased about 13.1-fold (median) at the peak (after 3–9 h), and then dropped to pre-treatment concentrations. By a successful physiological validation, we demonstrated the suitability of the cortisone EIA to non-invasively monitor increased adrenocortical activity, and thus, stress in the Blue-fronted parrot. This method opens up new perspectives for investigating the connection between behavioural disorders and stress in this bird species, and could also help in their captive management. PMID:26717147

Non-Invasive Measurement of Adrenocortical Activity in Blue-Fronted Parrots (Amazona aestiva, Linnaeus, 1758).

PubMed

Ferreira, João C P; Fujihara, Caroline J; Fruhvald, Erika; Trevisol, Eduardo; Destro, Flavia C; Teixeira, Carlos R; Pantoja, José C F; Schmidt, Elizabeth M S; Palme, Rupert

2015-01-01

Parrots kept in zoos and private households often develop psychological and behavioural disorders. Despite knowing that such disorders have a multifactorial aetiology and that chronic stress is involved, little is known about their development mainly due to a poor understanding of the parrots' physiology and the lack of validated methods to measure stress in these species. In birds, blood corticosterone concentrations provide information about adrenocortical activity. However, blood sampling techniques are difficult, highly invasive and inappropriate to investigate stressful situations and welfare conditions. Thus, a non-invasive method to measure steroid hormones is critically needed. Aiming to perform a physiological validation of a cortisone enzyme immunoassay (EIA) to measure glucocorticoid metabolites (GCM) in droppings of 24 Blue-fronted parrots (Amazona aestiva), two experiments were designed. During the experiments all droppings were collected at 3-h intervals. Initially, birds were sampled for 24 h (experiment 1) and one week later assigned to four different treatments (experiment 2): Control (undisturbed), Saline (0.2 mL of 0.9% NaCl IM), Dexamethasone (1 mg/kg IM) and Adrenocorticotropic hormone (ACTH; 25 IU IM). Treatments (always one week apart) were applied to all animals in a cross-over study design. A daily rhythm pattern in GCM excretion was detected but there were no sex differences (first experiment). Saline and dexamethasone treatments had no effect on GCM (not different from control concentrations). Following ACTH injection, GCM concentration increased about 13.1-fold (median) at the peak (after 3-9 h), and then dropped to pre-treatment concentrations. By a successful physiological validation, we demonstrated the suitability of the cortisone EIA to non-invasively monitor increased adrenocortical activity, and thus, stress in the Blue-fronted parrot. This method opens up new perspectives for investigating the connection between behavioural disorders and stress in this bird species, and could also help in their captive management.

Development of a measure for the assessment of peer-related positive emotional memories.

PubMed

Ferreira, Cláudia; Cunha, Marina; Marta-Simões, Joana; Duarte, Cristiana; Matos, Marcela; Pinto-Gouveia, José

2018-03-01

Previous research has demonstrated a link between early experiences of warmth, safeness, and soothing, and positive feelings, health, and well-being outcomes. Although the impact of positive parent-related early relationships and its posterior recall is well documented, research on the recall of warmth and safeness experiences within early peer relationships remains scarce. In fact, it is considered that the protective role of early positive peer relationships deserves intensive research; however, a specific measure that assesses this construct is still to be created. This study describes the development and validation of a new measure designed to assess the recall of early experiences of warmth, safeness, and affection in relation to peers (EMWSS-peers). Distinct samples, comprising individuals of both genders aged between 18 and 68 years old, were used to test the EMWSS-peers factorial structure through principal axis factoring (PAF) and confirmatory factor analysis (CFA), and to examine its psychometric properties. Principal axis factoring's results indicated that the 12-item scale presents a one-factor structure explaining a total of 71.50% of the variance. The CFA confirmed the plausibility of this structure. The EMWSS-peers also presented excellent internal consistency and construct, concurrent, and divergent validities. The EMWSS-peers seems to be a new avenue for the study of memories of early experiences with friends and colleagues and may entail a relevant contribution to clinical and research fields, particularly for upcoming investigations on the relationship of peer-related affiliative memories with well-being and mental health. The EMWSS-peers is a specific measure to assess the recall of warmth and safeness in early peer relationships. The EMWSS-peers is a brief, robust, and reliable self-report instrument. The EMWSS-peers presented excellent internal consistency and construct, concurrent, and divergent validities. The EMWSS-peers may open a new avenue for the study of memories of early peer-related experiences, with potential clinical and research implications. © 2017 The British Psychological Society.

Development of a Parachute System for Deceleration of Flying Vehicles in Supersonic Regimes

NASA Astrophysics Data System (ADS)

Pilyugin, N. N.; Khlebnikov, V. S.

2010-09-01

Aerodynamic problems arising during design and development of braking systems for re-entry vehicles are analyzed. Aerodynamic phenomena and laws valid in a supersonic flow around a pair of bodies having different shapes are studied. Results of this research can be used in solving application problems (arrangement and optimization of experiments; design and development of various braking systems for re-entry vehicles moving with supersonic speeds in the atmosphere).

Validation protocols for blood pressure-measuring devices: status quo and development needs.

PubMed

Beime, Beate; Deutsch, Cornelia; Gomez, Timothy; Zwingers, Thomas; Mengden, Thomas; Bramlage, Peter

2016-02-01

Hypertension is a major risk factor for cardiovascular morbidity and mortality. Therefore, blood pressure self-measuring devices have emerged as valuable tools in patient care and the accuracy of these instruments is of fundamental importance. For this reason, several validation procedures for assessing the efficacy of blood pressure monitoring devices have been developed, including protocols by the Association for the Advancement of Medical Instrumentation, the British Hypertension Society, the German Hypertension League (Prüfsiegelprotokoll), and the International Protocol of the Working Group on Blood Pressure Monitoring of the European Society of Hypertension. In the past, most of the protocols have been reviewed and modified because of experiences gained during the validation studies carried out. However, each shows distinct differences, that is number and characteristics of patients required, blood pressure ranges, and the length of the validation procedure, which may result in unique advantages and/or limitations associated with their use. The continued standardization and evolution of these guidelines is essential to ensure the efficacy of blood pressure-measuring devices marketed for clinical and home use. Here, we aimed to compare four currently used validation protocols and to initiate a discussion on potential future improvements.

Development of a proficiency-based virtual reality simulation training curriculum for laparoscopic appendicectomy.

PubMed

Sirimanna, Pramudith; Gladman, Marc A

2017-10-01

Proficiency-based virtual reality (VR) training curricula improve intraoperative performance, but have not been developed for laparoscopic appendicectomy (LA). This study aimed to develop an evidence-based training curriculum for LA. A total of 10 experienced (>50 LAs), eight intermediate (10-30 LAs) and 20 inexperienced (<10 LAs) operators performed guided and unguided LA tasks on a high-fidelity VR simulator using internationally relevant techniques. The ability to differentiate levels of experience (construct validity) was measured using simulator-derived metrics. Learning curves were analysed. Proficiency benchmarks were defined by the performance of the experienced group. Intermediate and experienced participants completed a questionnaire to evaluate the realism (face validity) and relevance (content validity). Of 18 surgeons, 16 (89%) considered the VR model to be visually realistic and 17 (95%) believed that it was representative of actual practice. All 'guided' modules demonstrated construct validity (P < 0.05), with learning curves that plateaued between sessions 6 and 9 (P < 0.01). When comparing inexperienced to intermediates to experienced, the 'unguided' LA module demonstrated construct validity for economy of motion (5.00 versus 7.17 versus 7.84, respectively; P < 0.01) and task time (864.5 s versus 477.2 s versus 352.1 s, respectively, P < 0.01). Construct validity was also confirmed for number of movements, path length and idle time. Validated modules were used for curriculum construction, with proficiency benchmarks used as performance goals. A VR LA model was realistic and representative of actual practice and was validated as a training and assessment tool. Consequently, the first evidence-based internationally applicable training curriculum for LA was constructed, which facilitates skill acquisition to proficiency. © 2017 Royal Australasian College of Surgeons.

NASA IN-STEP Cryo System Experiment flight test

NASA Astrophysics Data System (ADS)

Russo, S. C.; Sugimura, R. S.

The Cryo System Experiment (CSE), a NASA In-Space Technology Experiments Program (IN-STEP) flight experiment, was flown on Space Shuttle Discovery (STS 63) in February 1995. The experiment was developed by Hughes Aircraft Company to validate in zero- g space a 65 K cryogenic system for focal planes, optics, instruments or other equipment (gamma-ray spectrometers and infrared and submillimetre imaging instruments) that requires continuous cryogenic cooling. The CSE is funded by the NASA Office of Advanced Concepts and Technology's IN-STEP and managed by the Jet Propulsion Laboratory (JPL). The overall goal of the CSE was to validate and characterize the on-orbit performance of the two thermal management technologies that comprise a hybrid cryogenic system. These thermal management technologies consist of (1) a second-generation long-life, low-vibration, Stirling-cycle 65 K cryocooler that was used to cool a simulated thermal energy storage device (TRP) and (2) a diode oxygen heat pipe thermal switch that enables physical separation between a cryogenic refrigerator and a TRP. All CSE experiment objectives and 100% of the experiment success criteria were achieved. The level of confidence provided by this flight experiment is an important NASA and Department of Defense (DoD) milestone prior to multi-year mission commitment. Presented are generic lessons learned from the system integration of cryocoolers for a flight experiment and the recorded zero- g performance of the Stirling cryocooler and the diode oxygen heat pipe.

An FMRI-compatible Symbol Search task.

PubMed

Liebel, Spencer W; Clark, Uraina S; Xu, Xiaomeng; Riskin-Jones, Hannah H; Hawkshead, Brittany E; Schwarz, Nicolette F; Labbe, Donald; Jerskey, Beth A; Sweet, Lawrence H

2015-03-01

Our objective was to determine whether a Symbol Search paradigm developed for functional magnetic resonance imaging (FMRI) is a reliable and valid measure of cognitive processing speed (CPS) in healthy older adults. As all older adults are expected to experience cognitive declines due to aging, and CPS is one of the domains most affected by age, establishing a reliable and valid measure of CPS that can be administered inside an MR scanner may prove invaluable in future clinical and research settings. We evaluated the reliability and construct validity of a newly developed FMRI Symbol Search task by comparing participants' performance in and outside of the scanner and to the widely used and standardized Symbol Search subtest of the Wechsler Adult Intelligence Scale (WAIS). A brief battery of neuropsychological measures was also administered to assess the convergent and discriminant validity of the FMRI Symbol Search task. The FMRI Symbol Search task demonstrated high test-retest reliability when compared to performance on the same task administered out of the scanner (r=.791; p<.001). The criterion validity of the new task was supported, as it exhibited a strong positive correlation with the WAIS Symbol Search (r=.717; p<.001). Predicted convergent and discriminant validity patterns of the FMRI Symbol Search task were also observed. The FMRI Symbol Search task is a reliable and valid measure of CPS in healthy older adults and exhibits expected sensitivity to the effects of age on CPS performance.

Development and validation of a numerical model for cross-section optimization of a multi-part probe for soft tissue intervention.

PubMed

Frasson, L; Neubert, J; Reina, S; Oldfield, M; Davies, B L; Rodriguez Y Baena, F

2010-01-01

The popularity of minimally invasive surgical procedures is driving the development of novel, safer and more accurate surgical tools. In this context a multi-part probe for soft tissue surgery is being developed in the Mechatronics in Medicine Laboratory at Imperial College, London. This study reports an optimization procedure using finite element methods, for the identification of an interlock geometry able to limit the separation of the segments composing the multi-part probe. An optimal geometry was obtained and the corresponding three-dimensional finite element model validated experimentally. Simulation results are shown to be consistent with the physical experiments. The outcome of this study is an important step in the provision of a novel miniature steerable probe for surgery.

Development of a clinical feeding assessment scale for very young infants in South Africa

PubMed Central

2016-01-01

Background There is a need for validated neonatal feeding assessment instruments in South Africa. A locally developed instrument may contribute to standardised evaluation procedures of high-risk neonates and address needs in resource constrained developing settings. Objective The aim of the study was to develop and validate the content of a clinical feeding assessment scale to diagnose oropharyngeal dysphagia (OPD) in neonates. Method The Neonatal Feeding Assessment Scale (NFAS) was developed using the Delphi method. Five international and South African speech-language therapists (SLTs) formed the expert panel, participating in two rounds of electronic questionnaires to develop and validate the content of the NFAS. Results All participants agreed on the need for the development of a valid clinical feeding assessment instrument to use with the neonatal population. The initial NFAS consisted of 240 items across 8 sections, and after the Delphi process was implemented, the final format was reduced to 211 items across 6 sections. The final format of the NFAS is scored using a binary scoring system guiding the clinician to diagnose the presence or absence of OPD. All members agreed on the format, the scoring system and the feeding constructs addressed in the revised final format of the NFAS. Conclusion The Delphi method and the diverse clinical and research experience of participants could be integrated to develop the NFAS which may be used in clinical practice in South Africa or similar developing contexts. Because of demographically different work settings marked by developed versus developing contexts, participants did not have the same expectations of a clinical dysphagia assessment. The international participants contributed to evidence-based content development. Local participants considered the contextual challenges of South African SLTs entering the field with basic competencies in neonatal dysphagia management, thereby justifying a comprehensive clinical instrument. The NFAS is aimed at clinicians working in Neonatal Intensive Care Units where they manage large caseloads of high-risk neonates. Further validation of the NFAS is recommended to determine its criterion validity in comparison with a widely accepted standard such as the modified barium swallow study. PMID:27796101

A multicenter prospective cohort study on camera navigation training for key user groups in minimally invasive surgery.

PubMed

Graafland, Maurits; Bok, Kiki; Schreuder, Henk W R; Schijven, Marlies P

2014-06-01

Untrained laparoscopic camera assistants in minimally invasive surgery (MIS) may cause suboptimal view of the operating field, thereby increasing risk for errors. Camera navigation is often performed by the least experienced member of the operating team, such as inexperienced surgical residents, operating room nurses, and medical students. The operating room nurses and medical students are currently not included as key user groups in structured laparoscopic training programs. A new virtual reality laparoscopic camera navigation (LCN) module was specifically developed for these key user groups. This multicenter prospective cohort study assesses face validity and construct validity of the LCN module on the Simendo virtual reality simulator. Face validity was assessed through a questionnaire on resemblance to reality and perceived usability of the instrument among experts and trainees. Construct validity was assessed by comparing scores of groups with different levels of experience on outcome parameters of speed and movement proficiency. The results obtained show uniform and positive evaluation of the LCN module among expert users and trainees, signifying face validity. Experts and intermediate experience groups performed significantly better in task time and camera stability during three repetitions, compared to the less experienced user groups (P < .007). Comparison of learning curves showed significant improvement of proficiency in time and camera stability for all groups during three repetitions (P < .007). The results of this study show face validity and construct validity of the LCN module. The module is suitable for use in training curricula for operating room nurses and novice surgical trainees, aimed at improving team performance in minimally invasive surgery. © The Author(s) 2013.

The development and validation of a questionnaire to measure the clinical learning environment for undergraduate dental students (DECLEI).

PubMed

Kossioni, A E; Lyrakos, G; Ntinalexi, I; Varela, R; Economu, I

2014-05-01

The aim of this study was to develop and validate according to psychometric standards a self-administered instrument to measure the students' self-perceptions of the undergraduate clinical dental environment (DECLEI). The initial questionnaire was developed using feedback from dental students, experts' opinion and an extensive literature review. Critical incident technique (CIT) analysis was used to generate items and identify domains. Thirty clinical dental students participated in a pilot validation that generated a 67-item questionnaire. To develop a shorter and more practical version of the instrument, DECLEI-67 was distributed to 153 clinical students at the University of Athens and its English version to 51 students from various dental schools, attending the 2012 European Dental Students Association meeting. This final procedure aimed to select items, identify subscales and measure internal consistency and discriminant validity. A total of 202 students returned the questionnaires (response rate 99%). The final instrument included 24 items divided into three subscales: (i) organisation and learning opportunities, (ii) professionalism and communication and (iii) satisfaction and commitment to the dental studies. Cronbach's α for the total questionnaire was 0.89. The interscale correlations ranged from 0.39 to 0.48. The instrument identified differences related to school of origin, age and duration of clinical experience. An interpretation of the scores (range 0–100) has been proposed. The 24-item DECLEI seemed to be a practical and valid instrument to measure a dental school's undergraduate clinical learning environment.

Translational Medicine Guide transforms drug development processes: the recent Merck experience.

PubMed

Dolgos, Hugues; Trusheim, Mark; Gross, Dietmar; Halle, Joern-Peter; Ogden, Janet; Osterwalder, Bruno; Sedman, Ewen; Rossetti, Luciano

2016-03-01

Merck is implementing a question-based Translational Medicine Guide (TxM Guide) beginning as early as lead optimization into its stage-gate drug development process. Initial experiences with the TxM Guide, which is embedded into an integrated development plan tailored to each development program, demonstrated opportunities to improve target understanding, dose setting (i.e., therapeutic index), and patient subpopulation selection with more robust and relevant early human-based evidence, and increased use of biomarkers and simulations. The TxM Guide is also helping improve organizational learning, costs, and governance. It has also shown the need for stronger external resources for validating biomarkers, demonstrating clinical utility, tracking natural disease history, and biobanking. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Development of Supersonic Combustion Experiments for CFD Modeling

NASA Technical Reports Server (NTRS)

Baurle, Robert; Bivolaru, Daniel; Tedder, Sarah; Danehy, Paul M.; Cutler, Andrew D.; Magnotti, Gaetano

2007-01-01

This paper describes the development of an experiment to acquire data for developing and validating computational fluid dynamics (CFD) models for turbulence in supersonic combusting flows. The intent is that the flow field would be simple yet relevant to flows within hypersonic air-breathing engine combustors undergoing testing in vitiated-air ground-testing facilities. Specifically, it describes development of laboratory-scale hardware to produce a supersonic combusting coaxial jet, discusses design calculations, operability and types of flames observed. These flames are studied using the dual-pump coherent anti- Stokes Raman spectroscopy (CARS) - interferometric Rayleigh scattering (IRS) technique. This technique simultaneously and instantaneously measures temperature, composition, and velocity in the flow, from which many of the important turbulence statistics can be found. Some preliminary CARS data are presented.

Reflective education for professional practice: discovering knowledge from experience.

PubMed

Lyons, J

1999-01-01

To continually develop as a discipline, a profession needs to generate a knowledge base that can evolve from education and practice. Midwifery reflective practitioners have the potential to develop clinical expertise directed towards achieving desirable, safe and effective practice. Midwives are 'with woman', providing the family with supportive and helpful relationships as they share the deep and profound experiences of childbirth. To become skilled helpers students need to develop reflective skills and valid midwifery knowledge grounded in their personal experiences and practice. Midwife educators and practitioners can assist students and enhance their learning by expanding the scope of practice, encouraging self-assessment and the development of reflective and professional skills. This paper explores journal writing as a learning strategy for the development of reflective skills within midwifery and explores its value for midwifery education. It also examines, through the use of critical social theory and adult learning principles, how midwives can assist and thus enhance students learning through the development of professional and reflective skills for midwifery practice.

Validation of spatial variability in downscaling results from the VALUE perfect predictor experiment

NASA Astrophysics Data System (ADS)

Widmann, Martin; Bedia, Joaquin; Gutiérrez, Jose Manuel; Maraun, Douglas; Huth, Radan; Fischer, Andreas; Keller, Denise; Hertig, Elke; Vrac, Mathieu; Wibig, Joanna; Pagé, Christian; Cardoso, Rita M.; Soares, Pedro MM; Bosshard, Thomas; Casado, Maria Jesus; Ramos, Petra

2016-04-01

VALUE is an open European network to validate and compare downscaling methods for climate change research. Within VALUE a systematic validation framework to enable the assessment and comparison of both dynamical and statistical downscaling methods has been developed. In the first validation experiment the downscaling methods are validated in a setup with perfect predictors taken from the ERA-interim reanalysis for the period 1997 - 2008. This allows to investigate the isolated skill of downscaling methods without further error contributions from the large-scale predictors. One aspect of the validation is the representation of spatial variability. As part of the VALUE validation we have compared various properties of the spatial variability of downscaled daily temperature and precipitation with the corresponding properties in observations. We have used two test validation datasets, one European-wide set of 86 stations, and one higher-density network of 50 stations in Germany. Here we present results based on three approaches, namely the analysis of i.) correlation matrices, ii.) pairwise joint threshold exceedances, and iii.) regions of similar variability. We summarise the information contained in correlation matrices by calculating the dependence of the correlations on distance and deriving decorrelation lengths, as well as by determining the independent degrees of freedom. Probabilities for joint threshold exceedances and (where appropriate) non-exceedances are calculated for various user-relevant thresholds related for instance to extreme precipitation or frost and heat days. The dependence of these probabilities on distance is again characterised by calculating typical length scales that separate dependent from independent exceedances. Regionalisation is based on rotated Principal Component Analysis. The results indicate which downscaling methods are preferable if the dependency of variability at different locations is relevant for the user.

Control Activity in Support of NASA Turbine Based Combined Cycle (TBCC) Research

NASA Technical Reports Server (NTRS)

Stueber, Thomas J.; Vrnak, Daniel R.; Le, Dzu K.; Ouzts, Peter J.

2010-01-01

Control research for a Turbine Based Combined Cycle (TBCC) propulsion system is the current focus of the Hypersonic Guidance, Navigation, and Control (GN&C) discipline team. The ongoing work at the NASA Glenn Research Center (GRC) supports the Hypersonic GN&C effort in developing tools to aid the design of control algorithms to manage a TBCC airbreathing propulsion system during a critical operating period. The critical operating period being addressed in this paper is the span when the propulsion system transitions from one cycle to another, referred to as mode transition. One such tool, that is a basic need for control system design activities, is computational models (hereto forth referred to as models) of the propulsion system. The models of interest for designing and testing controllers are Control Development Models (CDMs) and Control Validation Models (CVMs). CDMs and CVMs are needed for each of the following propulsion system elements: inlet, turbine engine, ram/scram dual-mode combustor, and nozzle. This paper presents an overall architecture for a TBCC propulsion system model that includes all of the propulsion system elements. Efforts are under way, focusing on one of the propulsion system elements, to develop CDMs and CVMs for a TBCC propulsion system inlet. The TBCC inlet aerodynamic design being modeled is that of the Combined-Cycle Engine (CCE) Testbed. The CCE Testbed is a large-scale model of an aerodynamic design that was verified in a small-scale screening experiment. The modeling approach includes employing existing state-of-the-art simulation codes, developing new dynamic simulations, and performing system identification experiments on the hardware in the NASA GRC 10 by10-Foot Supersonic Wind Tunnel. The developed CDMs and CVMs will be available for control studies prior to hardware buildup. The system identification experiments on the CCE Testbed will characterize the necessary dynamics to be represented in CDMs for control design. These system identification models will also be the reference models to validate the CDM and CVM models. Validated models will give value to the tools used to develop the models.

Design and validation of the Health Professionals' Attitudes Toward the Homeless Inventory (HPATHI).

PubMed

Buck, David S; Monteiro, F Marconi; Kneuper, Suzanne; Rochon, Donna; Clark, Dana L; Melillo, Allegra; Volk, Robert J

2005-01-10

Recent literature has called for humanistic care of patients and for medical schools to begin incorporating humanism into medical education. To assess the attitudes of health-care professionals toward homeless patients and to demonstrate how those attitudes might impact optimal care, we developed and validated a new survey instrument, the Health Professional Attitudes Toward the Homeless Inventory (HPATHI). An instrument that measures providers' attitudes toward the homeless could offer meaningful information for the design and implementation of educational activities that foster more compassionate homeless health care. Our intention was to describe the process of designing and validating the new instrument and to discuss the usefulness of the instrument for assessing the impact of educational experiences that involve working directly with the homeless on the attitudes, interest, and confidence of medical students and other health-care professionals. The study consisted of three phases: identifying items for the instrument; pilot testing the initial instrument with a group of 72 third-year medical students; and modifying and administering the instrument in its revised form to 160 health-care professionals and third-year medical students. The instrument was analyzed for reliability and validity throughout the process. A 19-item version of the HPATHI had good internal consistency with a Cronbach's alpha of 0.88 and a test-retest reliability coefficient of 0.69. The HPATHI showed good concurrent validity, and respondents with more than one year of experience with homeless patients scored significantly higher than did those with less experience. Factor analysis yielded three subscales: Personal Advocacy, Social Advocacy, and Cynicism. The HPATHI demonstrated strong reliability for the total scale and satisfactory test-retest reliability. Extreme group comparisons suggested that experience with the homeless rather than medical training itself could affect health-care professionals' attitudes toward the homeless. This could have implications for the evaluation of medical school curricula.

Experiences with the ALICE Mesos infrastructure

NASA Astrophysics Data System (ADS)

Berzano, D.; Eulisse, G.; Grigoraş, C.; Napoli, K.

2017-10-01

Apache Mesos is a resource management system for large data centres, initially developed by UC Berkeley, and now maintained under the Apache Foundation umbrella. It is widely used in the industry by companies like Apple, Twitter, and Airbnb and it is known to scale to 10 000s of nodes. Together with other tools of its ecosystem, such as Mesosphere Marathon or Metronome, it provides an end-to-end solution for datacenter operations and a unified way to exploit large distributed systems. We present the experience of the ALICE Experiment Offline & Computing in deploying and using in production the Apache Mesos ecosystem for a variety of tasks on a small 500 cores cluster, using hybrid OpenStack and bare metal resources. We will initially introduce the architecture of our setup and its operation, we will then describe the tasks which are performed by it, including release building and QA, release validation, and simple Monte Carlo production. We will show how we developed Mesos enabled components (called “Mesos Frameworks”) to carry out ALICE specific needs. In particular, we will illustrate our effort to integrate Work Queue, a lightweight batch processing engine developed by University of Notre Dame, which ALICE uses to orchestrate release validation. Finally, we will give an outlook on how to use Mesos as resource manager for DDS, a software deployment system developed by GSI which will be the foundation of the system deployment for ALICE next generation Online-Offline (O2).

Unsteady boundary layer development on a wind turbine blade: an experimental study of a surrogate problem

NASA Astrophysics Data System (ADS)

Cadel, Daniel R.; Zhang, Di; Lowe, K. Todd; Paterson, Eric G.

2018-04-01

Wind turbines with thick blade profiles experience turbulent, periodic approach flow, leading to unsteady blade loading and large torque fluctuations on the turbine drive shaft. Presented here is an experimental study of a surrogate problem representing some key aspects of the wind turbine unsteady fluid mechanics. This experiment has been designed through joint consideration by experiment and computation, with the ultimate goal of numerical model development for aerodynamics in unsteady and turbulent flows. A cylinder at diameter Reynolds number of 65,000 and Strouhal number of 0.184 is placed 10.67 diameters upstream of a NACA 63215b airfoil with chord Reynolds number of 170,000 and chord-reduced frequency of k=2π fc/2/V=1.5. Extensive flow field measurements using particle image velocimetry provide a number of insights about this flow, as well as data for model validation and development. Velocity contours on the airfoil suction side in the presence of the upstream cylinder indicate a redistribution of turbulent normal stresses from transverse to streamwise, consistent with rapid distortion theory predictions. A study of the boundary layer over the suction side of the airfoil reveals very low Reynolds number turbulent mean streamwise velocity profiles. The dominance of the high amplitude large eddy passages results in a phase lag in streamwise velocity as a function of distance from the wall. The results and accompanying description provide a new test case incorporating moderate-reduced frequency inflow for computational model validation and development.

Statistical modeling of software reliability

NASA Technical Reports Server (NTRS)

Miller, Douglas R.

1992-01-01

This working paper discusses the statistical simulation part of a controlled software development experiment being conducted under the direction of the System Validation Methods Branch, Information Systems Division, NASA Langley Research Center. The experiment uses guidance and control software (GCS) aboard a fictitious planetary landing spacecraft: real-time control software operating on a transient mission. Software execution is simulated to study the statistical aspects of reliability and other failure characteristics of the software during development, testing, and random usage. Quantification of software reliability is a major goal. Various reliability concepts are discussed. Experiments are described for performing simulations and collecting appropriate simulated software performance and failure data. This data is then used to make statistical inferences about the quality of the software development and verification processes as well as inferences about the reliability of software versions and reliability growth under random testing and debugging.

Cloud cover determination in polar regions from satellite imagery

NASA Technical Reports Server (NTRS)

Barry, R. G.; Key, J. R.; Maslanik, J. A.

1988-01-01

The principal objectives of this project are: (1) to develop suitable validation data sets to evaluate the effectiveness of the International Satellite Cloud Climatology Project (ISCCP) operational algorithm for cloud retrieval in polar regions and to validate model simulations of polar cloud cover; (2) to identify limitations of current procedures for varying atmospheric surface conditions, and to explore potential means to remedy them using textural classifiers; and (3) to compare synoptic cloud data from a control run experiment of the GISS climate model II with typical observed synoptic cloud patterns.

The Development of Inquiry Learning Materials to Complete Content Life System Organization in Junior High School Students

NASA Astrophysics Data System (ADS)

Mayasari, F.; Raharjo; Supardi, Z. A. I.

2018-01-01

This research aims to develop the material eligibility to complete the inquiry learning of student in the material organization system of junior high school students. Learning materials developed include syllabi, lesson plans, students’ textbook, worksheets, and learning achievement test. This research is the developmental research which employ Dick and Carey model to develop learning material. The experiment was done in Junior High School 4 Lamongan regency using One Group Pretest-Posttest Design. The data collection used validation, observation, achievement test, questionnaire administration, and documentation. Data analysis techniques used quantitative and qualitative descriptive.The results showed that the developed learning material was valid and can be used. Learning activity accomplished with good category, where student activities were observed. The aspects of attitudes were observed during the learning process are honest, responsible, and confident. Student learning achievement gained an average of 81, 85 in complete category, with N-Gain 0, 75 for a high category. The activities and student response to learning was very well categorized. Based on the results, this researcher concluded that the device classified as feasible of inquiry-based learning (valid, practical, and effective) system used on the material organization of junior high school students.

Science objectives and performance of a radiometer and window design for atmospheric entry experiments

NASA Technical Reports Server (NTRS)

Craig, Roger A.; Davy, William C.; Whiting, Ellis E.

1994-01-01

The Radiative Heating Experiment, RHE, aboard the Aeroassist Flight Experiment, AFE, (now cancelled) was to make in-situ measurements of the stagnation region shock layer radiation during an aerobraking maneuver from geosynchronous to low earth orbit. The measurements were to provide a data base to help develop and validate aerothermodynamic computational models. Although cancelled, much work was done to develop the science requirements and to successfully meet RHE technical challenges. This paper discusses the RHE scientific objectives and expected science performance of a small sapphire window for the RHE radiometers. The spectral range required was from 170 to 900 nm. The window size was based on radiometer sensitivity requirements including capability of on-orbit solar calibration.

Two-dimensional radial laser scanning for circular marker detection and external mobile robot tracking.

PubMed

Teixidó, Mercè; Pallejà, Tomàs; Font, Davinia; Tresanchez, Marcel; Moreno, Javier; Palacín, Jordi

2012-11-28

This paper presents the use of an external fixed two-dimensional laser scanner to detect cylindrical targets attached to moving devices, such as a mobile robot. This proposal is based on the detection of circular markers in the raw data provided by the laser scanner by applying an algorithm for outlier avoidance and a least-squares circular fitting. Some experiments have been developed to empirically validate the proposal with different cylindrical targets in order to estimate the location and tracking errors achieved, which are generally less than 20 mm in the area covered by the laser sensor. As a result of the validation experiments, several error maps have been obtained in order to give an estimate of the uncertainty of any location computed. This proposal has been validated with a medium-sized mobile robot with an attached cylindrical target (diameter 200 mm). The trajectory of the mobile robot was estimated with an average location error of less than 15 mm, and the real location error in each individual circular fitting was similar to the error estimated with the obtained error maps. The radial area covered in this validation experiment was up to 10 m, a value that depends on the radius of the cylindrical target and the radial density of the distance range points provided by the laser scanner but this area can be increased by combining the information of additional external laser scanners.

Experimental studies of Micro- and Nano-grained UO 2: Grain Growth Behavior, Sufrace Morphology, and Fracture Toughness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miao, Yinbin; Mo, Kun; Jamison, Laura M.

This activity is supported by the US Nuclear Energy Advanced Modeling and Simulation (NEAMS) Fuels Product Line (FPL) and aims at providing experimental data for the validation of the mesoscale simulation code MARMOT. MARMOT is a mesoscale multiphysics code that predicts the coevolution of microstructure and properties within reactor fuel during its lifetime in the reactor. It is an important component of the Moose-Bison-Marmot (MBM) code suite that has been developed by Idaho National Laboratory (INL) to enable next generation fuel performance modeling capability as part of the NEAMS Program FPL. In order to ensure the accuracy of the microstructure-basedmore » materials models being developed within the MARMOT code, extensive validation efforts must be carried out. In this report, we summarize the experimental efforts in FY16 including the following important experiments: (1) in-situ grain growth measurement of nano-grained UO 2; (2) investigation of surface morphology in micrograined UO 2; (3) Nano-indentation experiments on nano- and micro-grained UO 2. The highlight of this year is: we have successfully demonstrated our capability to in-situ measure grain size development while maintaining the stoichiometry of nano-grained UO 2 materials; the experiment is, for the first time, using synchrotron X-ray diffraction to in-situ measure grain growth behavior of UO 2.« less

The project ownership survey: measuring differences in scientific inquiry experiences.

PubMed

Hanauer, David I; Dolan, Erin L

2014-01-01

A growing body of research documents the positive outcomes of research experiences for undergraduates, including increased persistence in science. Study of undergraduate lab learning experiences has demonstrated that the design of the experience influences the extent to which students report ownership of the project and that project ownership is one of the psychosocial factors involved in student retention in the sciences. To date, methods for measuring project ownership have not been suitable for the collection of larger data sets. The current study aims to rectify this by developing, presenting, and evaluating a new instrument for measuring project ownership. Eighteen scaled items were generated based on prior research and theory related to project ownership and combined with 30 items shown to measure respondents' emotions about an experience, resulting in the Project Ownership survey (POS). The POS was analyzed to determine its dimensionality, reliability, and validity. The POS had a coefficient alpha of 0.92 and thus has high internal consistency. Known-groups validity was analyzed through the ability of the instrument to differentiate between students who studied in traditional versus research-based laboratory courses. The POS scales as differentiated between the groups and findings paralleled previous results in relation to the characteristics of project ownership.

VALUE - A Framework to Validate Downscaling Approaches for Climate Change Studies

NASA Astrophysics Data System (ADS)

Maraun, Douglas; Widmann, Martin; Gutiérrez, José M.; Kotlarski, Sven; Chandler, Richard E.; Hertig, Elke; Wibig, Joanna; Huth, Radan; Wilke, Renate A. I.

2015-04-01

VALUE is an open European network to validate and compare downscaling methods for climate change research. VALUE aims to foster collaboration and knowledge exchange between climatologists, impact modellers, statisticians, and stakeholders to establish an interdisciplinary downscaling community. A key deliverable of VALUE is the development of a systematic validation framework to enable the assessment and comparison of both dynamical and statistical downscaling methods. Here, we present the key ingredients of this framework. VALUE's main approach to validation is user-focused: starting from a specific user problem, a validation tree guides the selection of relevant validation indices and performance measures. Several experiments have been designed to isolate specific points in the downscaling procedure where problems may occur: what is the isolated downscaling skill? How do statistical and dynamical methods compare? How do methods perform at different spatial scales? Do methods fail in representing regional climate change? How is the overall representation of regional climate, including errors inherited from global climate models? The framework will be the basis for a comprehensive community-open downscaling intercomparison study, but is intended also to provide general guidance for other validation studies.

VALUE: A framework to validate downscaling approaches for climate change studies

NASA Astrophysics Data System (ADS)

Maraun, Douglas; Widmann, Martin; Gutiérrez, José M.; Kotlarski, Sven; Chandler, Richard E.; Hertig, Elke; Wibig, Joanna; Huth, Radan; Wilcke, Renate A. I.

2015-01-01

VALUE is an open European network to validate and compare downscaling methods for climate change research. VALUE aims to foster collaboration and knowledge exchange between climatologists, impact modellers, statisticians, and stakeholders to establish an interdisciplinary downscaling community. A key deliverable of VALUE is the development of a systematic validation framework to enable the assessment and comparison of both dynamical and statistical downscaling methods. In this paper, we present the key ingredients of this framework. VALUE's main approach to validation is user- focused: starting from a specific user problem, a validation tree guides the selection of relevant validation indices and performance measures. Several experiments have been designed to isolate specific points in the downscaling procedure where problems may occur: what is the isolated downscaling skill? How do statistical and dynamical methods compare? How do methods perform at different spatial scales? Do methods fail in representing regional climate change? How is the overall representation of regional climate, including errors inherited from global climate models? The framework will be the basis for a comprehensive community-open downscaling intercomparison study, but is intended also to provide general guidance for other validation studies.

Development and initial validation of a cessation fatigue scale.

PubMed

Mathew, Amanda R; Heckman, Bryan W; Meier, Ellen; Carpenter, Matthew J

2017-07-01

Smoking cessation fatigue, or tiredness of attempting to quit smoking, has been posited as a latent construct encompassing loss of motivation, loss of hope in cessation success, decreased self-efficacy, and exhaustion of self-control resources. Despite the potential clinical impact of characterizing cessation fatigue, there is currently no validated measure to assess it. Using a rational scale development approach, we developed a cessation fatigue measure and examined its reliability and construct validity in relation to a) smokers' experience of a recently failed quit attempt (QA) and b) readiness to engage in a subsequent QA. Data were drawn from an online cross-sectional survey of 484 smokers who relapsed from a QA within the past 30days. Exploratory factor analysis identified three factors within the 17-item Cessation Fatigue Scale (CFS), which we labeled: emotional exhaustion, pessimism, and devaluation. High internal consistency was observed for each factor and across the full scale. As expected, CFS overall was positively associated with withdrawal severity and difficulty quitting. CFS was negatively associated with previously validated measures of intention to quit, self-efficacy, and abstinence-related motivational engagement, even after adjusting for nicotine dependence. Findings provide initial validation for a new tool to assess cessation fatigue and contribute needed information on a theory-driven component of cessation-related motivation and relapse risk. Copyright © 2017. Published by Elsevier B.V.

Designing biomedical proteomics experiments: state-of-the-art and future perspectives.

PubMed

Maes, Evelyne; Kelchtermans, Pieter; Bittremieux, Wout; De Grave, Kurt; Degroeve, Sven; Hooyberghs, Jef; Mertens, Inge; Baggerman, Geert; Ramon, Jan; Laukens, Kris; Martens, Lennart; Valkenborg, Dirk

2016-05-01

With the current expanded technical capabilities to perform mass spectrometry-based biomedical proteomics experiments, an improved focus on the design of experiments is crucial. As it is clear that ignoring the importance of a good design leads to an unprecedented rate of false discoveries which would poison our results, more and more tools are developed to help researchers designing proteomic experiments. In this review, we apply statistical thinking to go through the entire proteomics workflow for biomarker discovery and validation and relate the considerations that should be made at the level of hypothesis building, technology selection, experimental design and the optimization of the experimental parameters.

A Framework for Text Mining in Scientometric Study: A Case Study in Biomedicine Publications

NASA Astrophysics Data System (ADS)

Silalahi, V. M. M.; Hardiyati, R.; Nadhiroh, I. M.; Handayani, T.; Rahmaida, R.; Amelia, M.

2018-04-01

The data of Indonesians research publications in the domain of biomedicine has been collected to be text mined for the purpose of a scientometric study. The goal is to build a predictive model that provides a classification of research publications on the potency for downstreaming. The model is based on the drug development processes adapted from the literatures. An effort is described to build the conceptual model and the development of a corpus on the research publications in the domain of Indonesian biomedicine. Then an investigation is conducted relating to the problems associated with building a corpus and validating the model. Based on our experience, a framework is proposed to manage the scientometric study based on text mining. Our method shows the effectiveness of conducting a scientometric study based on text mining in order to get a valid classification model. This valid model is mainly supported by the iterative and close interactions with the domain experts starting from identifying the issues, building a conceptual model, to the labelling, validation and results interpretation.

Development and Validation of the Pregnancy and Infant Orientation Questionnaire

PubMed Central

Meyer-Bahlburg, Heino F. L.; Dolezal, Curtis; Johnson, Laurel L.; Kessler, Suzanne J.; Schober, Justine M.; Zucker, Kenneth J.

2009-01-01

The purpose of this current study was the construction, scaling, and scale validation of a self-report questionnaire assessing biographical information and motivation for pregnancy and infant care in men and women with disorders of sex development or other gender variations of potential clinical relevance. The overall design of the questionnaire and the initial item pool were derived from related clinical and research experience. Collection of pilot data and, where appropriate, scale construction (via principal components analyses) were based on Canadian convenience samples of heterosexual (HET) and non-HET men and women (N=414). A sample of gender-dysphoric (GDYS) men and women (n=45) was added for validity analysis. Validation of the resulting scales was based on the demonstration of expected scale differences between HET men and women, as well as between HET, non-HET, and GDYS men and between HET, non-HET, and GDYS women, and was successful with one exception. This study concludes that this new questionnaire, in addition to its descriptive sections, provides several distinct scales related to desires for child bearing and child rearing and has good psychometric properties. PMID:19998066

Optimization and Validation of a Plaque Reduction Neutralization Test for the Detection of Neutralizing Antibodies to Four Serotypes of Dengue Virus Used in Support of Dengue Vaccine Development

PubMed Central

Timiryasova, Tatyana M.; Bonaparte, Matthew I.; Luo, Ping; Zedar, Rebecca; Hu, Branda T.; Hildreth, Stephen W.

2013-01-01

A dengue plaque reduction neutralization test (PRNT) to measure dengue serotype–specific neutralizing antibodies for all four virus serotypes was developed, optimized, and validated in accordance with guidelines for validation of bioanalytical test methods using human serum samples from dengue-infected persons and persons receiving a dengue vaccine candidate. Production and characterization of dengue challenge viruses used in the assay was standardized. Once virus stocks were characterized, the dengue PRNT50 for each of the four serotypes was optimized according to a factorial design of experiments approach for critical test parameters, including days of cell seeding before testing, percentage of overlay carboxymethylcellulose medium, and days of incubation post-infection to generate a robust assay. The PRNT50 was then validated and demonstrated to be suitable to detect and measure dengue serotype-specific neutralizing antibodies in human serum samples with acceptable intra-assay and inter-assay precision, accuracy/dilutability, specificity, and with a lower limit of quantitation of 10. PMID:23458954

Validation metrics for turbulent plasma transport

DOE PAGES

Holland, C.

2016-06-22

Developing accurate models of plasma dynamics is essential for confident predictive modeling of current and future fusion devices. In modern computer science and engineering, formal verification and validation processes are used to assess model accuracy and establish confidence in the predictive capabilities of a given model. This paper provides an overview of the key guiding principles and best practices for the development of validation metrics, illustrated using examples from investigations of turbulent transport in magnetically confined plasmas. Particular emphasis is given to the importance of uncertainty quantification and its inclusion within the metrics, and the need for utilizing synthetic diagnosticsmore » to enable quantitatively meaningful comparisons between simulation and experiment. As a starting point, the structure of commonly used global transport model metrics and their limitations is reviewed. An alternate approach is then presented, which focuses upon comparisons of predicted local fluxes, fluctuations, and equilibrium gradients against observation. Furthermore, the utility of metrics based upon these comparisons is demonstrated by applying them to gyrokinetic predictions of turbulent transport in a variety of discharges performed on the DIII-D tokamak, as part of a multi-year transport model validation activity.« less

Bridging the Gap Between Validation and Implementation of Non-Animal Veterinary Vaccine Potency Testing Methods.

PubMed

Dozier, Samantha; Brown, Jeffrey; Currie, Alistair

2011-11-29

In recent years, technologically advanced high-throughput techniques have been developed that replace, reduce or refine animal use in vaccine quality control tests. Following validation, these tests are slowly being accepted for use by international regulatory authorities. Because regulatory acceptance itself has not guaranteed that approved humane methods are adopted by manufacturers, various organizations have sought to foster the preferential use of validated non-animal methods by interfacing with industry and regulatory authorities. After noticing this gap between regulation and uptake by industry, we began developing a paradigm that seeks to narrow the gap and quicken implementation of new replacement, refinement or reduction guidance. A systematic analysis of our experience in promoting the transparent implementation of validated non-animal vaccine potency assays has led to the refinement of our paradigmatic process, presented here, by which interested parties can assess the local regulatory acceptance of methods that reduce animal use and integrate them into quality control testing protocols, or ensure the elimination of peripheral barriers to their use, particularly for potency and other tests carried out on production batches.

Development and validation of RAYDOSE: a Geant4-based application for molecular radiotherapy

NASA Astrophysics Data System (ADS)

Marcatili, S.; Pettinato, C.; Daniels, S.; Lewis, G.; Edwards, P.; Fanti, S.; Spezi, E.

2013-04-01

We developed and validated a Monte-Carlo-based application (RAYDOSE) to generate patient-specific 3D dose maps on the basis of pre-treatment imaging studies. A CT DICOM image is used to model patient geometry, while repeated PET scans are employed to assess radionuclide kinetics and distribution at the voxel level. In this work, we describe the structure of this application and present the tests performed to validate it against reference data and experiments. We used the spheres of a NEMA phantom to calculate S values and total doses. The comparison with reference data from OLINDA/EXM showed an agreement within 2% for a sphere size above 2.8 cm diameter. A custom heterogeneous phantom composed of several layers of Perspex and lung equivalent material was used to compare TLD measurements of gamma radiation from 131I to Monte Carlo simulations. An agreement within 5% was found. RAYDOSE has been validated against reference data and experimental measurements and can be a useful multi-modality platform for treatment planning and research in MRT.

Validation metrics for turbulent plasma transport

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holland, C.

Developing accurate models of plasma dynamics is essential for confident predictive modeling of current and future fusion devices. In modern computer science and engineering, formal verification and validation processes are used to assess model accuracy and establish confidence in the predictive capabilities of a given model. This paper provides an overview of the key guiding principles and best practices for the development of validation metrics, illustrated using examples from investigations of turbulent transport in magnetically confined plasmas. Particular emphasis is given to the importance of uncertainty quantification and its inclusion within the metrics, and the need for utilizing synthetic diagnosticsmore » to enable quantitatively meaningful comparisons between simulation and experiment. As a starting point, the structure of commonly used global transport model metrics and their limitations is reviewed. An alternate approach is then presented, which focuses upon comparisons of predicted local fluxes, fluctuations, and equilibrium gradients against observation. Furthermore, the utility of metrics based upon these comparisons is demonstrated by applying them to gyrokinetic predictions of turbulent transport in a variety of discharges performed on the DIII-D tokamak, as part of a multi-year transport model validation activity.« less

Design of a Synthetic Aperture Array to Support Experiments in Active Control of Scattering

DTIC Science & Technology

1990-06-01

becomes necessary to validate the theory and test the control system algorithms . While experiments in open water would be most like the anticipated...mathematical development of the beamforming algorithms used as well as an estimate of their applicability to the specifics of beamforming in a reverberant...Chebyshev array have been proposed. The method used in ARRAY, a nested product algorithm , proposed by Bresler [21] is recommended by Pozar [19] and

Results of the Vapor Compression Distillation Flight Experiment (VCD-FE)

NASA Technical Reports Server (NTRS)

Hutchens, Cindy; Graves, Rex

2004-01-01

Vapor Compression Distillation (VCD) is the chosen technology for urine processing aboard the International Space Station (ISS). Key aspects of the VCD design have been verified and significant improvements made throughout the ground;based development history. However, an important element lacking from previous subsystem development efforts was flight-testing. Consequently, the demonstration and validation of the VCD technology and the investigation of subsystem performance in micro-gravity were the primary goals of the VCD-FE. The Vapor Compression Distillation Flight Experiment (VCD-E) was a flight experiment aboard the Space Shuttle Columbia during the STS-107 mission. The VCD-FE was a full-scale developmental version of the Space Station Urine Processor Assembly (UPA) and was designed to test some of the potential micro-gravity issues with the design. This paper summarizes the experiment results.

The HEPEX Seasonal Streamflow Forecast Intercomparison Project

NASA Astrophysics Data System (ADS)

Wood, A. W.; Schepen, A.; Bennett, J.; Mendoza, P. A.; Ramos, M. H.; Wetterhall, F.; Pechlivanidis, I.

2016-12-01

The Hydrologic Ensemble Prediction Experiment (HEPEX; www.hepex.org) has launched an international seasonal streamflow forecasting intercomparison project (SSFIP) with the goal of broadening community knowledge about the strengths and weaknesses of various operational approaches being developed around the world. While some of these approaches have existed for decades (e.g. Ensemble Streamflow Prediction - ESP - in the United States and elsewhere), recent years have seen the proliferation of new operational and experimental streamflow forecasting approaches. These have largely been developed independently in each country, thus it is difficult to assess whether the approaches employed in some centers offer more promise for development than others. This motivates us to establish a forecasting testbed to facilitate a diagnostic evaluation of a range of different streamflow forecasting approaches and their components over a common set of catchments, using a common set of validation methods. Rather than prescribing a set of scientific questions from the outset, we are letting the hindcast results and notable differences in methodologies on a watershed-specific basis motivate more targeted analyses and sub-experiments that may provide useful insights. The initial pilot of the testbed involved two approaches - CSIRO's Bayesian joint probability (BJP) and NCAR's sequential regression - for two catchments, each designated by one of the teams (the Murray River, Australia, and Hungry Horse reservoir drainage area, USA). Additional catchments/approaches are in the process of being added to the testbed. To support this CSIRO and NCAR have developed data and analysis tools, data standards and protocols to formalize the experiment. These include requirements for cross-validation, verification, reference climatologies, and common predictands. This presentation describes the SSFIP experiments, pilot basin results and scientific findings to date.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perry, Theodore Sonne; Dodd, Evan S.; DeVolder, Barbara Gloria

X-ray opacity is a crucial factor in all radiation-hydrodynamics calculations, yet it is one of the least validated of the material properties in simulation codes for high-energy-density plasmas. Recent opacity experiments at the Sandia Z-machine have shown up to factors of two discrepancies between theory and experiment for various mid-Z elements (Fe, Cr, Ni). These discrepancies raise doubts regarding the accuracy of the opacity models which are used in ICF and stewardship as well as in astrophysics. Therefore, a new experimental opacity platform has been developed on the National Ignition Facility (NIF), not only to verify the Z-machine experimental results,more » but also to extend the experiments to other temperatures and densities. Within the context of the national opacity strategy, the first NIF experiments were directed towards measuring the opacity of iron at a temperature of ~160 eV and an electron density of ~7xl021 cm-3(Anchor 1). The Z data agree with theory at these conditions, providing a reference point for validation of the NIF platform. Development shots on NIF have demonstrated the ability to create a sufficiently bright point backlighter using an imploding plastic capsule, and also a combined hohlraum, sample and laser drive able to produce iron plasmas at the desired conditions. Spectrometer qualification has been completed, albeit with additional improvements planned, and the first iron absorption spectra have now been obtained.« less

Forensic Uncertainty Quantification of Explosive Dispersal of Particles

NASA Astrophysics Data System (ADS)

Hughes, Kyle; Park, Chanyoung; Haftka, Raphael; Kim, Nam-Ho

2017-06-01

In addition to the numerical challenges of simulating the explosive dispersal of particles, validation of the simulation is often plagued with poor knowledge of the experimental conditions. The level of experimental detail required for validation is beyond what is usually included in the literature. This presentation proposes the use of forensic uncertainty quantification (UQ) to investigate validation-quality experiments to discover possible sources of uncertainty that may have been missed in initial design of experiments or under-reported. The current experience of the authors has found that by making an analogy to crime scene investigation when looking at validation experiments, valuable insights may be gained. One examines all the data and documentation provided by the validation experimentalists, corroborates evidence, and quantifies large sources of uncertainty a posteriori with empirical measurements. In addition, it is proposed that forensic UQ may benefit from an independent investigator to help remove possible implicit biases and increases the likelihood of discovering unrecognized uncertainty. Forensic UQ concepts will be discussed and then applied to a set of validation experiments performed at Eglin Air Force Base. This work was supported in part by the U.S. Department of Energy, National Nuclear Security Administration, Advanced Simulation and Computing Program.

Perceived experiences of atheist discrimination: Instrument development and evaluation.

PubMed

Brewster, Melanie E; Hammer, Joseph; Sawyer, Jacob S; Eklund, Austin; Palamar, Joseph

2016-10-01

The present 2 studies describe the development and initial psychometric evaluation of a new instrument, the Measure of Atheist Discrimination Experiences (MADE), which may be used to examine the minority stress experiences of atheist people. Items were created from prior literature, revised by a panel of expert researchers, and assessed psychometrically. In Study 1 (N = 1,341 atheist-identified people), an exploratory factor analysis with 665 participants suggested the presence of 5 related dimensions of perceived discrimination. However, bifactor modeling via confirmatory factor analysis and model-based reliability estimates with data from the remaining 676 participants affirmed the presence of a strong "general" factor of discrimination and mixed to poor support for substantive subdimensions. In Study 2 (N = 1,057 atheist-identified people), another confirmatory factor analysis and model-based reliability estimates strongly supported the bifactor model from Study 1 (i.e., 1 strong "general" discrimination factor) and poor support for subdimensions. Across both studies, the MADE general factor score demonstrated evidence of good reliability (i.e., Cronbach's alphas of .94 and .95; omega hierarchical coefficients of .90 and .92), convergent validity (i.e., with stigma consciousness, β = .56; with awareness of public devaluation, β = .37), and preliminary evidence for concurrent validity (i.e., with loneliness β = .18; with psychological distress β = .27). Reliability and validity evidence for the MADE subscale scores was not sufficient to warrant future use of the subscales. Limitations and implications for future research and clinical work with atheist individuals are discussed. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Psychological and interactional characteristics of patients with somatoform disorders: Validation of the Somatic Symptoms Experiences Questionnaire (SSEQ) in a clinical psychosomatic population.

PubMed

Herzog, Annabel; Voigt, Katharina; Meyer, Björn; Wollburg, Eileen; Weinmann, Nina; Langs, Gernot; Löwe, Bernd

2015-06-01

The new DSM-5 Somatic Symptom Disorder (SSD) emphasizes the importance of psychological processes related to somatic symptoms in patients with somatoform disorders. To address this, the Somatic Symptoms Experiences Questionnaire (SSEQ), the first self-report scale that assesses a broad range of psychological and interactional characteristics relevant to patients with a somatoform disorder or SSD, was developed. This prospective study was conducted to validate the SSEQ. The 15-item SSEQ was administered along with a battery of self-report questionnaires to psychosomatic inpatients. Patients were assessed with the Structured Clinical Interview for DSM-IV to confirm a somatoform, depressive, or anxiety disorder. Confirmatory factor analyses, tests of internal consistency and tests of validity were performed. Patients (n=262) with a mean age of 43.4 years, 60.3% women, were included in the analyses. The previously observed four-factor model was replicated and internal consistency was good (Cronbach's α=.90). Patients with a somatoform disorder had significantly higher scores on the SSEQ (t=4.24, p<.001) than patients with a depressive/anxiety disorder. Construct validity was shown by high correlations with other instruments measuring related constructs. Hierarchical multiple regression analyses showed that the questionnaire predicted health-related quality of life. Sensitivity to change was shown by significantly higher effect sizes of the SSEQ change scores for improved patients than for patients without improvement. The SSEQ appears to be a reliable, valid, and efficient instrument to assess a broad range of psychological and interactional features related to the experience of somatic symptoms. Copyright © 2015 Elsevier Inc. All rights reserved.

QUOTEchemo: a patient-centred instrument to measure quality of communication preceding chemotherapy treatment through the patient's eyes.

PubMed

van Weert, Julia C M; Jansen, Jesse; de Bruijn, Gert-Jan; Noordman, Janneke; van Dulmen, Sandra; Bensing, Jozien M

2009-11-01

Knowing patients' needs is a prerequisite to ensure high quality cancer care. This study describes the development and psychometric properties of a patient-centred instrument to measure needs and actual experiences with communication preceding chemotherapy treatment: QUOTE(chemo). QUOTE-questionnaires (Quality Of care Through the patients' Eyes) are widely used to gain insight into unmet needs, but no validated, standardised questionnaire combining patients' needs and experiences surrounding chemotherapy treatment is available yet. To evaluate the psychometric properties of the QUOTE(chemo), content validity, internal structure and convergent validity were investigated amongst 345 cancer patients, new to chemotherapy, from 10 different hospitals. Literature study, focus group discussions and a categorisation procedure of 67 relevant topics revealed seven main themes: Treatment-related information, Prognosis information, Rehabilitation information, Coping information, Interpersonal communication, Tailored communication and Affective communication. Confirmatory factor analysis using structural equation modelling indicated that the measurement model provided good fit to the data with factor loadings ranging from .43 to .77. The seven QUOTE(chemo) dimensions captured relevant issues of concern with good internal consistency (alpha .72-.92), satisfactory item-total correlations (.35-.79) and satisfactory convergent validity. Affective communication, Treatment-related information and Rehabilitation information were perceived most important by patients. The instrument also appeared to be able to determine which aspects need improvement to ensure high quality care. The highest need for improvement was found for communicating Prognosis information and Rehabilitation information and for Interpersonal communication. These findings provide preliminary evidence of the reliability and validity of the QUOTE(chemo) for use in cancer care surrounding chemotherapy treatment. Researchers and health care providers can use the instrument to measure patients' needs and experiences with communication to identify aspects that need improvement.

Validating An Analytic Completeness Model for Kepler Target Stars Based on Flux-level Transit Injection Experiments

NASA Astrophysics Data System (ADS)

Catanzarite, Joseph; Burke, Christopher J.; Li, Jie; Seader, Shawn; Haas, Michael R.; Batalha, Natalie; Henze, Christopher; Christiansen, Jessie; Kepler Project, NASA Advanced Supercomputing Division

2016-06-01

The Kepler Mission is developing an Analytic Completeness Model (ACM) to estimate detection completeness contours as a function of exoplanet radius and period for each target star. Accurate completeness contours are necessary for robust estimation of exoplanet occurrence rates.The main components of the ACM for a target star are: detection efficiency as a function of SNR, the window function (WF) and the one-sigma depth function (OSDF). (Ref. Burke et al. 2015). The WF captures the falloff in transit detection probability at long periods that is determined by the observation window (the duration over which the target star has been observed). The OSDF is the transit depth (in parts per million) that yields SNR of unity for the full transit train. It is a function of period, and accounts for the time-varying properties of the noise and for missing or deweighted data.We are performing flux-level transit injection (FLTI) experiments on selected Kepler target stars with the goal of refining and validating the ACM. “Flux-level” injection machinery inserts exoplanet transit signatures directly into the flux time series, as opposed to “pixel-level” injection, which inserts transit signatures into the individual pixels using the pixel response function. See Jie Li's poster: ID #2493668, "Flux-level transit injection experiments with the NASA Pleiades Supercomputer" for details, including performance statistics.Since FLTI is affordable for only a small subset of the Kepler targets, the ACM is designed to apply to most Kepler target stars. We validate this model using “deep” FLTI experiments, with ~500,000 injection realizations on each of a small number of targets and “shallow” FLTI experiments with ~2000 injection realizations on each of many targets. From the results of these experiments, we identify anomalous targets, model their behavior and refine the ACM accordingly.In this presentation, we discuss progress in validating and refining the ACM, and we compare our detection efficiency curves with those derived from the associated pixel-level transit injection experiments.Kepler was selected as the 10th mission of the Discovery Program. Funding for this mission is provided by NASA, Science Mission Directorate.

Cooperative International Education. Background Paper I.

ERIC Educational Resources Information Center

Griffin, Willis H.; Spence, Ralph B.

A discussion of the problems involved in developing a valid program for cooperation in international education begins by stressing the distinction between education and schooling: the first an age-old experience derived from the whole culture, and the second a relatively new concept devoted to mastering material which someone has decided is…

Social Capital: Its Constructs and Survey Development

ERIC Educational Resources Information Center

Enfield, Richard P.; Nathaniel, Keith C.

2013-01-01

This article reports on experiences and methods of adapting a valid adult social capital assessment to youth audiences in order to measure social capital and sense of place. The authors outline the process of adapting, revising, prepiloting, piloting, and administering a youth survey exploring young people's sense of community, involvement in the…

Offshore Standards and Research Validation | Wind | NREL

Science.gov Websites

Research Capabilities 35 years of wind turbine testing experience Custom high speed data acquisition system turbine testing expertise, NREL has developed instrumentation for high resolution measurements at sea by and technicians, who conduct a wide range of field measurements to verify turbine performance and

Development and Validation of a Depression Scale for Asian Adolescents

ERIC Educational Resources Information Center

Woo, Bernardine S. C.; Chang, W. C.; Fung, Daniel S. S.; Koh, Jessie B. K.; Leong, Joyce S. F.; Kee, Carolyn H. Y.; Seah, Cheryl K. F.

2004-01-01

Items covering both core and culture-specific facets of depression were generated based on literature review and clinical experience. They were modified following focus group discussions with depressed adolescents and adolescents in the community. The newly constructed Asian Adolescent Depression Scale (AADS) was administered to a clinical and a…

Physical Activity Measurement Methods for Young Children: A Comparative Study

ERIC Educational Resources Information Center

Hands, Beth; Parker, Helen; Larkin, Dawne

2006-01-01

Many behavior patterns that impact on physical activity experiences are established in early childhood, therefore it is important that valid, reliable, and feasible measures are constructed to identify children who are not developing appropriate and healthy activity habits. In this study, measures of physical activity derived by accelerometry and…

Benefiting from Authentic Education to a Sustainable Social Development

ERIC Educational Resources Information Center

Watagodakumbura, Chandana

2013-01-01

Authentic education provides a unique learning experience to individual learners, specifically by addressing their psychological and neurological needs. The assessment of learners is done through generic attributes that have more validity and relates to intrinsic learner characteristics that could last throughout the life span of the learner.…

The Job Training and Job Satisfaction Survey Technical Manual

ERIC Educational Resources Information Center

Schmidt, Steven W.

2004-01-01

Job training has become an important aspect of an employee's overall job experience. However, it is not often called out specifically on instruments measuring job satisfaction. This technical manual details the processes used in the development and validation of a survey instrument to measure job training satisfaction and overall job…

DE-NE0008277_PROTEUS final technical report 2018

DOE Office of Scientific and Technical Information (OSTI.GOV)

Enqvist, Andreas

This project details re-evaluations of experiments of gas-cooled fast reactor (GCFR) core designs performed in the 1970s at the PROTEUS reactor and create a series of International Reactor Physics Experiment Evaluation Project (IRPhEP) benchmarks. Currently there are no gas-cooled fast reactor (GCFR) experiments available in the International Handbook of Evaluated Reactor Physics Benchmark Experiments (IRPhEP Handbook). These experiments are excellent candidates for reanalysis and development of multiple benchmarks because these experiments provide high-quality integral nuclear data relevant to the validation and refinement of thorium, neptunium, uranium, plutonium, iron, and graphite cross sections. It would be cost prohibitive to reproduce suchmore » a comprehensive suite of experimental data to support any future GCFR endeavors.« less

Performance-based comparison of neonatal intubation training outcomes: simulator and live animal.

PubMed

Andreatta, Pamela B; Klotz, Jessica J; Dooley-Hash, Suzanne L; Hauptman, Joe G; Biddinger, Bea; House, Joseph B

2015-02-01

The purpose of this article was to establish psychometric validity evidence for competency assessment instruments and to evaluate the impact of 2 forms of training on the abilities of clinicians to perform neonatal intubation. To inform the development of assessment instruments, we conducted comprehensive task analyses including each performance domain associated with neonatal intubation. Expert review confirmed content validity. Construct validity was established using the instruments to differentiate between the intubation performance abilities of practitioners (N = 294) with variable experience (novice through expert). Training outcomes were evaluated using a quasi-experimental design to evaluate performance differences between 294 subjects randomly assigned to 1 of 2 training groups. The training intervention followed American Heart Association Pediatric Advanced Life Support and Neonatal Resuscitation Program protocols with hands-on practice using either (1) live feline or (2) simulated feline models. Performance assessment data were captured before and directly following the training. All data were analyzed using analysis of variance with repeated measures and statistical significance set at P < .05. Content validity, reliability, and consistency evidence were established for each assessment instrument. Construct validity for each assessment instrument was supported by significantly higher scores for subjects with greater levels of experience, as compared with those with less experience (P = .000). Overall, subjects performed significantly better in each assessment domain, following the training intervention (P = .000). After controlling for experience level, there were no significant differences among the cognitive, performance, and self-efficacy outcomes between clinicians trained with live animal model or simulator model. Analysis of retention scores showed that simulator trained subjects had significantly higher performance scores after 18 weeks (P = .01) and 52 weeks (P = .001) and cognitive scores after 52 weeks (P = .001). The results of this study demonstrate the feasibility of using valid, reliable assessment instruments to assess clinician competency and self-efficacy in the performance of neonatal intubation. We demonstrated the relative equivalency of live animal and simulation-based models as tools to support acquisition of neonatal intubation skills. Retention of performance abilities was greater for subjects trained using the simulator, likely because it afforded greater opportunity for repeated practice. Outcomes in each assessment area were influenced by the previous intubation experience of participants. This suggests that neonatal intubation training programs could be tailored to the level of provider experience to make efficient use of time and educational resources. Future research focusing on the uses of assessment in the applied clinical environment, as well as identification of optimal training cycles for performance retention, is merited.

Quasi-experimental study designs series-paper 6: risk of bias assessment.

PubMed

Waddington, Hugh; Aloe, Ariel M; Becker, Betsy Jane; Djimeu, Eric W; Hombrados, Jorge Garcia; Tugwell, Peter; Wells, George; Reeves, Barney

2017-09-01

Rigorous and transparent bias assessment is a core component of high-quality systematic reviews. We assess modifications to existing risk of bias approaches to incorporate rigorous quasi-experimental approaches with selection on unobservables. These are nonrandomized studies using design-based approaches to control for unobservable sources of confounding such as difference studies, instrumental variables, interrupted time series, natural experiments, and regression-discontinuity designs. We review existing risk of bias tools. Drawing on these tools, we present domains of bias and suggest directions for evaluation questions. The review suggests that existing risk of bias tools provide, to different degrees, incomplete transparent criteria to assess the validity of these designs. The paper then presents an approach to evaluating the internal validity of quasi-experiments with selection on unobservables. We conclude that tools for nonrandomized studies of interventions need to be further developed to incorporate evaluation questions for quasi-experiments with selection on unobservables. Copyright © 2017 Elsevier Inc. All rights reserved.

Using Online Methods to Develop and Examine the Hong Kong Chinese Translation of the Dissociative Experiences Scale.

PubMed

Chan, Chitat; Fung, Hong Wang; Choi, Tat Ming; Ross, Colin A

2017-01-01

Identifying dissociation is important for mental health services because it could fundamentally affect one's diagnosis and treatment plan. The Dissociative Experiences Scale (DES) is a widely-used self-report scale for measuring dissociative experiences. It has been translated into many languages and used in many countries. However, there is no validated Hong Kong Chinese version of the DES available in the field, and there is no other validated Hong Kong Chinese instrument for assessing dissociative disorders. This pilot study used online methods to translate the DES to Hong Kong Chinese (HKC-DES). The results indicated that the HKC-DES has excellent internal consistency (α = .953) and very good test-retest reliability (r = .797). Bilingual participants' responses to the DES and HKC-DES indicated high similarity, and were significantly correlated (r = .960). These results initially verified the reliability and cross-language equivalence of the scale. Implications for healthcare practice and research are discussed.

Preliminary experiments on pharmacokinetic diffuse fluorescence tomography of CT-scanning mode

NASA Astrophysics Data System (ADS)

Zhang, Yanqi; Wang, Xin; Yin, Guoyan; Li, Jiao; Zhou, Zhongxing; Zhao, Huijuan; Gao, Feng; Zhang, Limin

2016-10-01

In vivo tomographic imaging of the fluorescence pharmacokinetic parameters in tissues can provide additional specific and quantitative physiological and pathological information to that of fluorescence concentration. This modality normally requires a highly-sensitive diffuse fluorescence tomography (DFT) working in dynamic way to finally extract the pharmacokinetic parameters from the measured pharmacokinetics-associated temporally-varying boundary intensity. This paper is devoted to preliminary experimental validation of our proposed direct reconstruction scheme of instantaneous sampling based pharmacokinetic-DFT: A highly-sensitive DFT system of CT-scanning mode working with parallel four photomultiplier-tube photon-counting channels is developed to generate an instantaneous sampling dataset; A direct reconstruction scheme then extracts images of the pharmacokinetic parameters using the adaptive-EKF strategy. We design a dynamic phantom that can simulate the agent metabolism in living tissue. The results of the dynamic phantom experiments verify the validity of the experiment system and reconstruction algorithms, and demonstrate that system provides good resolution, high sensitivity and quantitativeness at different pump speed.

Using Existing NASA Satellites as Orbiting Testbeds to Accelerate Technology Infusion into Future Missions

NASA Technical Reports Server (NTRS)

Mandl, Daniel; Ly, Vuong; Frye, Stuart

2006-01-01

One of the shared problems for new space mission developers is that it is extremely difficult to infuse new technology into new missions unless that technology has been flight validated. Therefore, the issue is that new technology is required to fly on a successful mission for flight validation. We have been experimenting with new technology on existing satellites by retrofitting primarily the flight software while the missions are on-orbit to experiment with new operations concepts. Experiments have been using Earth Observing 1 (EO-1), which is part of the New Millennium Program at NASA. EO-1 finished its prime mission one year after its launch on November 21,2000. From November 21,2001 until the present, EO-1 has been used in parallel with additional science data gathering to test out various sensor web concepts. Similarly, the Cosmic Hot Interstellar Plasma Spectrometer (CHIPS) satellite was also a one year mission flown by the University of Berkeley, sponsored by NASA and whose prime mission ended August 30,2005. Presently, CHIPS is being used to experiment with a seamless space to ground interface by installing Core Flight System (cFS), a "plug-and-play" architecture developed by the Flight Software Branch at NASA/GSFC on top of the existing space-to-ground Internet Protocol (IP) interface that CHIPS implemented. For example, one targeted experiment is to connect CHIPS to a rover via this interface and the Internet, and trigger autonomous actions on CHIPS, the rover or both. Thus far, having satellites to experiment with new concepts has turned out to be an inexpensive way to infuse new technology for future missions. Relevant experiences thus far and future plans will be discussed in this presentation.

Depth- and range-dependent variation in the performance of aquatic telemetry systems: understanding and predicting the susceptibility of acoustic tag-receiver pairs to close proximity detection interference.

PubMed

Scherrer, Stephen R; Rideout, Brendan P; Giorli, Giacomo; Nosal, Eva-Marie; Weng, Kevin C

2018-01-01

Passive acoustic telemetry using coded transmitter tags and stationary receivers is a popular method for tracking movements of aquatic animals. Understanding the performance of these systems is important in array design and in analysis. Close proximity detection interference (CPDI) is a condition where receivers fail to reliably detect tag transmissions. CPDI generally occurs when the tag and receiver are near one another in acoustically reverberant settings. Here we confirm transmission multipaths reflected off the environment arriving at a receiver with sufficient delay relative to the direct signal cause CPDI. We propose a ray-propagation based model to estimate the arrival of energy via multipaths to predict CPDI occurrence, and we show how deeper deployments are particularly susceptible. A series of experiments were designed to develop and validate our model. Deep (300 m) and shallow (25 m) ranging experiments were conducted using Vemco V13 acoustic tags and VR2-W receivers. Probabilistic modeling of hourly detections was used to estimate the average distance a tag could be detected. A mechanistic model for predicting the arrival time of multipaths was developed using parameters from these experiments to calculate the direct and multipath path lengths. This model was retroactively applied to the previous ranging experiments to validate CPDI observations. Two additional experiments were designed to validate predictions of CPDI with respect to combinations of deployment depth and distance. Playback of recorded tags in a tank environment was used to confirm multipaths arriving after the receiver's blanking interval cause CPDI effects. Analysis of empirical data estimated the average maximum detection radius (AMDR), the farthest distance at which 95% of tag transmissions went undetected by receivers, was between 840 and 846 m for the deep ranging experiment across all factor permutations. From these results, CPDI was estimated within a 276.5 m radius of the receiver. These empirical estimations were consistent with mechanistic model predictions. CPDI affected detection at distances closer than 259-326 m from receivers. AMDR determined from the shallow ranging experiment was between 278 and 290 m with CPDI neither predicted nor observed. Results of validation experiments were consistent with mechanistic model predictions. Finally, we were able to predict detection/nondetection with 95.7% accuracy using the mechanistic model's criterion when simulating transmissions with and without multipaths. Close proximity detection interference results from combinations of depth and distance that produce reflected signals arriving after a receiver's blanking interval has ended. Deployment scenarios resulting in CPDI can be predicted with the proposed mechanistic model. For deeper deployments, sea-surface reflections can produce CPDI conditions, resulting in transmission rejection, regardless of the reflective properties of the seafloor.

Impact of Pre-Pharmacy Work Experience on Development of Professional Identity in Student Pharmacists.

PubMed

Bloom, Timothy J; Smith, Jennifer D; Rich, Wesley

2017-12-01

Objective. To determine the benefit of pharmacy work experience on the development of student pharmacists' professional identity. Methods. Students in all four professional years were surveyed using a validated Professional Self-identity Questionnaire (PSIQ). They were also asked about pharmacy experience prior to matriculation and their performance on Drug Information tests given midway through the P1 year and at the beginning of the P3 year. PSIQ responses and test results were compared based on pharmacy experience. Results. The PSIQ was completed by 293 student pharmacists, for a 67% response rate, with 76% of respondents reporting pharmacy experience prior to matriculation. Statistically higher scores on responses to 6 of the 9 PSIQ Likert-type items were observed from students in the first professional year for those with pharmacy experience; however, only one item in the second year showed differences with none in the third and fourth years. No impact of experience was observed on Top 100 or Top 300 grades. Conclusion. Pre-matriculation pharmacy experience may increase development of professional identity early in the student experience but may have little impact on academic readiness. Schools and colleges of pharmacy hoping to recruit students with an early sense of professional identity should consider adding such experience to their admissions requirements.

Assessment of Differential Item Functioning in the Experiences of Discrimination Index

PubMed Central

Cunningham, Timothy J.; Berkman, Lisa F.; Gortmaker, Steven L.; Kiefe, Catarina I.; Jacobs, David R.; Seeman, Teresa E.; Kawachi, Ichiro

2011-01-01

The psychometric properties of instruments used to measure self-reported experiences of discrimination in epidemiologic studies are rarely assessed, especially regarding construct validity. The authors used 2000–2001 data from the Coronary Artery Risk Development in Young Adults (CARDIA) Study to examine differential item functioning (DIF) in 2 versions of the Experiences of Discrimination (EOD) Index, an index measuring self-reported experiences of racial/ethnic and gender discrimination. DIF may confound interpretation of subgroup differences. Large DIF was observed for 2 of 7 racial/ethnic discrimination items: White participants reported more racial/ethnic discrimination for the “at school” item, and black participants reported more racial/ethnic discrimination for the “getting housing” item. The large DIF by race/ethnicity in the index for racial/ethnic discrimination probably reflects item impact and is the result of valid group differences between blacks and whites regarding their respective experiences of discrimination. The authors also observed large DIF by race/ethnicity for 3 of 7 gender discrimination items. This is more likely to have been due to item bias. Users of the EOD Index must consider the advantages and disadvantages of DIF adjustment (omitting items, constructing separate measures, and retaining items). The EOD Index has substantial usefulness as an instrument that can assess self-reported experiences of discrimination. PMID:22038104

Understanding the Patient Perspective of Seizure Severity in Epilepsy: Development of a Conceptual Model.

PubMed

Borghs, Simon; Tomaszewski, Erin L; Halling, Katarina; de la Loge, Christine

2016-10-01

For patients with uncontrolled epilepsy, the severity and postictal sequelae of seizures might be more impactful than their frequency. Seizure severity is often assessed using patient-reported outcome (PRO) instruments; however, evidence of content validity for existing instruments is lacking. Our aim was to understand the real-life experiences of patients with uncontrolled epilepsy. A preliminary conceptual model was developed. The model was refined through (1) a targeted literature review of qualitative research on seizure severity; (2) interviews with four clinical epilepsy experts to evaluate identified concepts; and (3) qualitative interviews with patients with uncontrolled epilepsy, gathering descriptions of symptoms and impacts of epilepsy, focusing on how patients experience and describe "seizure severity." Findings were summarized in a final conceptual model of seizure severity in epilepsy. Twenty-five patients (12 who experienced primary generalized tonic-clonic seizures and 13 who experienced partial-onset seizures) expressed 42 different symptoms and 26 different impacts related to seizures. The final conceptual model contained a wide range of concepts related to seizure frequency, symptoms, and duration. Our model identified several new concepts that characterize the patient experience of seizure severity. A seizure severity PRO instrument should cover a wide range of seizure symptoms alongside frequency and duration of seizures. This qualitative work reinforces the notion that measuring seizure frequency is insufficient and that seizure severity is important in defining the patient's experience of epilepsy. This model could be used to assess the content validity of existing PRO instruments, or could support the development of a new one.

Development of the Holistic Nursing Competence Scale.

PubMed

Takase, Miyuki; Teraoka, Sachiko

2011-12-01

This study developed a scale to measure the nursing competence of Japanese registered nurses and to test its psychometric properties. Following the derivation of scale items and pilot testing, the final version of the scale was administered to 331 nurses to establish its internal consistency, as well as its construct and criterion-related validity. Using an exploratory and a confirmatory factor analysis, 36 items with a five-factor structure were retained to form the Holistic Nursing Competence Scale. These factors illustrate nurses' general aptitude and their competencies in staff education and management, ethical practice, the provision of nursing care, and professional development. The Scale has a positive correlation with the length of clinical experience. A Cronbach's alpha coefficient was 0.967. The Scale is a reliable and valid measure, helping both nurses and organizations to correctly evaluate nurses' competence and identify their needs for professional development. © 2011 Blackwell Publishing Asia Pty Ltd.

Joint investigation of working conditions, environmental and system performance at recycling centres--development of instruments and their usage.

PubMed

Engkvist, I-L; Eklund, J; Krook, J; Björkman, M; Sundin, E; Svensson, R; Eklund, M

2010-05-01

Recycling is a new and developing industry, which has only been researched to a limited extent. This article describes the development and use of instruments for data collection within a multidisciplinary research programme "Recycling centres in Sweden - working conditions, environmental and system performance". The overall purpose of the programme was to form a basis for improving the function of recycling centres with respect to these three perspectives and the disciplines of: ergonomics, safety, external environment, and production systems. A total of 10 instruments were developed for collecting data from employees, managers and visitors at recycling centres, including one instrument for observing visitors. Validation tests were performed in several steps. This, along with the quality of the collected data, and experience from the data collection, showed that the instruments and methodology used were valid and suitable for their purpose. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

Assessing physics learning identity: Survey development and validation

NASA Astrophysics Data System (ADS)

Li, Sissi L.; Demaree, Dedra

2012-02-01

Innovative curricula aim to improve content knowledge and the goal of helping students develop practices and skills of authentic scientist through active engagement learning. To students, these classroom practices often seem very different from their previous learning experiences in terms of behavioral expectations, learning attitude, and what learning means. We propose that productive participation in these learning environments require students to modify their identity as learners in addition to refining their science conceptual understanding. In order to measure changes in learning identity, we developed a 49-item survey to assess students' 1) expectations of student and teacher roles, 2) self efficacy towards skills supported in the Investigative Science Learning Environment (ISLE) and 3) attitudes towards social learning. Using principle components exploratory factor analysis, we have established two reliable factors with subscales that measure these student characteristics. This paper presents the survey development, validation and pilot study results.

Laboratory development and testing of spacecraft diagnostics

NASA Astrophysics Data System (ADS)

Amatucci, William; Tejero, Erik; Blackwell, Dave; Walker, Dave; Gatling, George; Enloe, Lon; Gillman, Eric

2017-10-01

The Naval Research Laboratory's Space Chamber experiment is a large-scale laboratory device dedicated to the creation of large-volume plasmas with parameters scaled to realistic space plasmas. Such devices make valuable contributions to the investigation of space plasma phenomena under controlled, reproducible conditions, allowing for the validation of theoretical models being applied to space data. However, in addition to investigations such as plasma wave and instability studies, such devices can also make valuable contributions to the development and testing of space plasma diagnostics. One example is the plasma impedance probe developed at NRL. Originally developed as a laboratory diagnostic, the sensor has now been flown on a sounding rocket, is included on a CubeSat experiment, and will be included on the DoD Space Test Program's STP-H6 experiment on the International Space Station. In this talk, we will describe how the laboratory simulation of space plasmas made this development path possible. Work sponsored by the US Naval Research Laboratory Base Program.

The Space Technology-7 Disturbance Reduction Systems

NASA Technical Reports Server (NTRS)

ODonnell, James R., Jr.; Hsu, Oscar C.; Hanson, John; Hruby, Vlad

2004-01-01

The Space Technology 7 Disturbance Reduction System (DRS) is an in-space technology demonstration designed to validate technologies that are required for future missions such as the Laser Interferometer Space Antenna (LISA) and the Micro-Arcsecond X-ray Imaging Mission (MAXIM). The primary sensors that will be used by DRS are two Gravitational Reference Sensors (GRSs) being developed by Stanford University. DRS will control the spacecraft so that it flies about one of the freely-floating Gravitational Reference Sensor test masses, keeping it centered within its housing. The other GRS serves as a cross-reference for the first as well as being used as a reference for .the spacecraft s attitude control. Colloidal MicroNewton Thrusters being developed by the Busek Co. will be used to control the spacecraft's position and attitude using a six degree-of-freedom Dynamic Control System being developed by Goddard Space Flight Center. A laser interferometer being built by the Jet Propulsion Laboratory will be used to help validate the results of the experiment. The DRS will be launched in 2008 on the European Space Agency (ESA) LISA Pathfinder spacecraft along with a similar ESA experiment, the LISA Test Package.

Development and Validation of a Rubric for Diagnosing Students’ Experimental Design Knowledge and Difficulties

PubMed Central

Dasgupta, Annwesa P.; Anderson, Trevor R.

2014-01-01

It is essential to teach students about experimental design, as this facilitates their deeper understanding of how most biological knowledge was generated and gives them tools to perform their own investigations. Despite the importance of this area, surprisingly little is known about what students actually learn from designing biological experiments. In this paper, we describe a rubric for experimental design (RED) that can be used to measure knowledge of and diagnose difficulties with experimental design. The development and validation of the RED was informed by a literature review and empirical analysis of undergraduate biology students’ responses to three published assessments. Five areas of difficulty with experimental design were identified: the variable properties of an experimental subject; the manipulated variables; measurement of outcomes; accounting for variability; and the scope of inference appropriate for experimental findings. Our findings revealed that some difficulties, documented some 50 yr ago, still exist among our undergraduate students, while others remain poorly investigated. The RED shows great promise for diagnosing students’ experimental design knowledge in lecture settings, laboratory courses, research internships, and course-based undergraduate research experiences. It also shows potential for guiding the development and selection of assessment and instructional activities that foster experimental design. PMID:26086658

Zero Boil-Off Tank (ZBOT) Experiment

NASA Technical Reports Server (NTRS)

Mcquillen, John

2016-01-01

The Zero-Boil-Off Tank (ZBOT) experiment has been developed as a small scale ISS experiment aimed at delineating important fluid flow, heat and mass transport, and phase change phenomena that affect cryogenic storage tank pressurization and pressure control in microgravity. The experiments use a simulant transparent low boiling point fluid (PnP) in a sealed transparent Dewar to study and quantify: (a) fluid flow and thermal stratification during pressurization; (b) mixing, thermal destratification, depressurization, and jet-ullage penetration during pressure control by jet mixing. The experiment will provide valuable microgravity empirical two-phase data associated with the above-mentioned physical phenomena through highly accurate local wall and fluid temperature and pressure measurements, full-field phase-distribution and flow visualization. Moreover, the experiments are performed under tightly controlled and definable heat transfer boundary conditions to provide reliable high-fidelity data and precise input as required for validation verification of state-of-the-art two-phase CFD models developed as part of this research and by other groups in the international scientific and cryogenic fluid management communities.

Technology for the Future: In-Space Technology Experiments Program, part 1

NASA Technical Reports Server (NTRS)

Breckenridge, Roger A. (Compiler); Clark, Lenwood G. (Compiler); Willshire, Kelli F. (Compiler); Beck, Sherwin M. (Compiler); Collier, Lisa D. (Compiler)

1991-01-01

The purpose of the Office of Aeronautics and Space Technology (OAST) In-Space Technology Experiment Program (In-STEP) 1988 Workshop was to identify and prioritize technologies that are critical for future national space programs and require validation in the space environment, and review current NASA (In-Reach) and industry/university (Out-Reach) experiments. A prioritized list of the critical technology needs was developed for the following eight disciplines: structures; environmental effects; power systems and thermal management; fluid management and propulsion systems; automation and robotics; sensors and information systems; in-space systems; and humans in space. This is part one of two parts and is the executive summary and experiment description. The executive summary portion contains keynote addresses, strategic planning information, and the critical technology needs summaries for each theme. The experiment description portion contains brief overviews of the objectives, technology needs and backgrounds, descriptions, and development schedules for current industry, university, and NASA space flight technology experiments.

In-step inflatable antenna experiment

NASA Astrophysics Data System (ADS)

Freeland, R. E.; Bilyeu, G.

Large deployable space antennas are needed to accommodate a number of applications that include mobile communications, earth observation radiometry, active microwave sensing, space-orbiting very long baseline interferometry, and Department of Defense (DoD) space-based radar. The criteria for evaluating candidate structural concepts for essentially all the applications is the same; high deployment reliability, low cost, low weight, low launch volume, and high aperture precision. A new class of space structures, called inflatable deployable structures, have tremendous potential for completely satisfying the first four criteria and good potential for accommodating the longer wavelength applications. An inflatable deployable antenna under development by L'Garde Inc. of Tustin, California, represents such a concept. Its level of technology is mature enough to support a meaningful orbital technology experiment. The NASA Office of Aeronautics and Space Technology initiated the In-Space Technology Experiments Program (IN-STEP) specifically to sponsor the verification and/or validation of unique and innovative space technologies in the space environment. The potential of the L'Garde concept has been recognized and resulted in its selection for an IN-STEP experiment. The objective of the experiment is to (a) validate the deployment of a 14-meter, inflatable parabolic reflector structure, (b) measure the reflector surface accuracy, and (c) investigate structural damping characteristics under operational conditions. The experiment approach will be to use the NASA Spartan Spacecraft to carry the experiment on orbit. Reflector deployment will be monitored by two high-resolution video cameras. Reflector surface quality will be measured with a digital imaging radiometer. Structural damping will be based on measuring the decay of reflector structure amplitude. The experiment is being managed by the Jet Propulsion Laboratory. The experiment definition phase (Phase B) will be completed by the end of fiscal year (FY) 1992; hardware development (Phase C/D) is expected to start by early FY 1993; and launch is scheduled for 1995. The paper describes the accomplishments to date and the approach for the remainder of the experiment.

Development and validation of a two-dimensional fast-response flood estimation model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Judi, David R; Mcpherson, Timothy N; Burian, Steven J

2009-01-01

A finite difference formulation of the shallow water equations using an upwind differencing method was developed maintaining computational efficiency and accuracy such that it can be used as a fast-response flood estimation tool. The model was validated using both laboratory controlled experiments and an actual dam breach. Through the laboratory experiments, the model was shown to give good estimations of depth and velocity when compared to the measured data, as well as when compared to a more complex two-dimensional model. Additionally, the model was compared to high water mark data obtained from the failure of the Taum Sauk dam. Themore » simulated inundation extent agreed well with the observed extent, with the most notable differences resulting from the inability to model sediment transport. The results of these validation studies complex two-dimensional model. Additionally, the model was compared to high water mark data obtained from the failure of the Taum Sauk dam. The simulated inundation extent agreed well with the observed extent, with the most notable differences resulting from the inability to model sediment transport. The results of these validation studies show that a relatively numerical scheme used to solve the complete shallow water equations can be used to accurately estimate flood inundation. Future work will focus on further reducing the computation time needed to provide flood inundation estimates for fast-response analyses. This will be accomplished through the efficient use of multi-core, multi-processor computers coupled with an efficient domain-tracking algorithm, as well as an understanding of the impacts of grid resolution on model results.« less

Computational Acoustic Beamforming for Noise Source Identification for Small Wind Turbines

PubMed Central

Lien, Fue-Sang

2017-01-01

This paper develops a computational acoustic beamforming (CAB) methodology for identification of sources of small wind turbine noise. This methodology is validated using the case of the NACA 0012 airfoil trailing edge noise. For this validation case, the predicted acoustic maps were in excellent conformance with the results of the measurements obtained from the acoustic beamforming experiment. Following this validation study, the CAB methodology was applied to the identification of noise sources generated by a commercial small wind turbine. The simulated acoustic maps revealed that the blade tower interaction and the wind turbine nacelle were the two primary mechanisms for sound generation for this small wind turbine at frequencies between 100 and 630 Hz. PMID:28378012

Lost in space: design of experiments and scientific exploration in a Hogarth Universe.

PubMed

Lendrem, Dennis W; Lendrem, B Clare; Woods, David; Rowland-Jones, Ruth; Burke, Matthew; Chatfield, Marion; Isaacs, John D; Owen, Martin R

2015-11-01

A Hogarth, or 'wicked', universe is an irregular environment generating data to support erroneous beliefs. Here, we argue that development scientists often work in such a universe. We demonstrate that exploring these multidimensional spaces using small experiments guided by scientific intuition alone, gives rise to an illusion of validity and a misplaced confidence in that scientific intuition. By contrast, design of experiments (DOE) permits the efficient mapping of such complex, multidimensional spaces. We describe simulation tools that enable research scientists to explore these spaces in relative safety. Copyright © 2015 Elsevier Ltd. All rights reserved.

World Ocean Circulation Experiment

NASA Technical Reports Server (NTRS)

Clarke, R. Allyn

1992-01-01

The oceans are an equal partner with the atmosphere in the global climate system. The World Ocean Circulation Experiment is presently being implemented to improve ocean models that are useful for climate prediction both by encouraging more model development but more importantly by providing quality data sets that can be used to force or to validate such models. WOCE is the first oceanographic experiment that plans to generate and to use multiparameter global ocean data sets. In order for WOCE to succeed, oceanographers must establish and learn to use more effective methods of assembling, quality controlling, manipulating and distributing oceanographic data.

Process material management in the Space Station environment

NASA Technical Reports Server (NTRS)

Perry, J. L.; Humphries, W. R.

1988-01-01

The Space Station will provide a unique facility for conducting material-processing and life-science experiments under microgravity conditions. These conditions place special requirements on the U.S. Laboratory for storing and transporting chemicals and process fluids, reclaiming water from selected experiments, treating and storing experiment wastes, and providing vacuum utilities. To meet these needs and provide a safe laboratory environment, the Process Material Management System (PMMS) is being developed. Preliminary design requirements and concepts related to the PMMS are addressed, and the MSFC PMMS breadboard test facility and a preliminary plan for validating the overall system design are discussed.

The COSIMA experiments and their verification, a data base for the validation of two phase flow computer codes

NASA Astrophysics Data System (ADS)

Class, G.; Meyder, R.; Stratmanns, E.

1985-12-01

The large data base for validation and development of computer codes for two-phase flow, generated at the COSIMA facility, is reviewed. The aim of COSIMA is to simulate the hydraulic, thermal, and mechanical conditions in the subchannel and the cladding of fuel rods in pressurized water reactors during the blowout phase of a loss of coolant accident. In terms of fuel rod behavior, it is found that during blowout under realistic conditions only small strains are reached. For cladding rupture extremely high rod internal pressures are necessary. The behavior of fuel rod simulators and the effect of thermocouples attached to the cladding outer surface are clarified. Calculations performed with the codes RELAP and DRUFAN show satisfactory agreement with experiments. This can be improved by updating the phase separation models in the codes.

Validation of the Child HCAHPS survey to measure pediatric inpatient experience of care in Flanders.

PubMed

Bruyneel, Luk; Coeckelberghs, Ellen; Buyse, Gunnar; Casteels, Kristina; Lommers, Barbara; Vandersmissen, Jo; Van Eldere, Johan; Van Geet, Chris; Vanhaecht, Kris

2017-07-01

The recently developed Child HCAHPS provides a standard to measure US hospitals' performance on pediatric inpatient experiences of care. We field-tested Child HCAHPS in Belgium to instigate international comparison. In the development stage, forward/backward translation was conducted and patients assessed content validity index as excellent. The draft Flemish Child HCAHPS included 63 items: 38 items for five topics hypothesized to be similar to those proposed in the US (communication with parent, communication with child, attention to safety and comfort, hospital environment, and global rating), 10 screeners, a 14-item demographic and descriptive section, and one open-ended item. A 6-week pilot test was subsequently performed in three pediatric wards (general ward, hematology and oncology ward, infant and toddler ward) at a JCI-accredited university hospital. An overall response rate of 90.99% (303/333) was achieved and was consistent across wards. Confirmatory factor analysis largely confirmed the configuration of the proposed composites. Composite and single-item measures related well to patients' global rating of the hospital. Interpretation of different patient experiences across types of wards merits further investigation. Child HCAHPS provides an opportunity for systematic and cross-national assessment of pediatric inpatient experiences. Sharing and implementing international best practices are the next logical step. What is Known: • Patient experience surveys are increasingly used to reflect on the quality, safety, and centeredness of patient care. • While adult inpatient experience surveys are routinely used across countries around the world, the measurement of pediatric inpatient experiences is a young field of research that is essential to reflect on family-centered care. What is New: • We demonstrate that the US-developed Child HCAHPS provides an opportunity for international benchmarking of pediatric inpatient experiences with care through parents and guardians. • Our study findings show considerable variation in experiences for types of pediatric services. Support to share good practices and launch quality improvement initiatives can be obtained by organizing regular two-way feedback sessions with clinicians to place the findings in context.

Social-Emotional and Behavioral Assessment in Culturally and Linguistically Diverse Learner Populations: An Examination of the Validity and Reliability of the Social Skills Improvement System in School-Aged Spanish-Speaking English Language Learners

ERIC Educational Resources Information Center

Mission, Paige Lauren

2016-01-01

Social-emotional development, psychosocial functioning, and relational experiences have been shown to impact academic achievement and psychological well-being. Social skills have been identified as being particularly critical in promoting mental health and life-long success. Children with well-developed social skills (e.g., sharing, being…

Development of a solar receiver for an organic rankine cycle engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haskins, H.J.; Taylor, R.M.; Osborn, D.B.

A solar receiver is described for use with an organic Rankine cycle (ORC) engine as part of the Small Community Solar Thermal Power Experiment (SCSE). The selected receiver concept is a direct-heated, once-through, monotube boiler normally operating at supercritical pressure. Fabrication methods for the receiver core have been developed and validated with flat braze samples, cylindrical segment samples, and a complete full-scale core assembly.

Army Communicator. Volume 38, Number 2. Summer 2013

DTIC Science & Technology

2013-01-01

subject to a penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. 1. REPORT DATE... development and education, without relying solely on operational experience. While waging two wars, many Soldiers sacrificed going to school and...invest in the education and training of our formations. Leadership training is especially important in the Signal Regiment where development of

A model of electron collecting plasma contractors

NASA Technical Reports Server (NTRS)

Davis, V. A.; Katz, I.; Mandell, M. J.; Parks, D. E.

1989-01-01

A model of plasma contractors is being developed, which can be used to describe electron collection in a laboratory test tank and in the space environment. To validate the model development, laboratory experiments are conducted in which the source plasma is separated from the background plasma by a double layer. Model calculations show that an increase in ionization rate with potential produces a steep rise in collected current with increasing potential.

First Steps to Develop and Validate a CFPD Model in Order to Support the Design of Nose-to-Brain Delivered Biopharmaceuticals.

PubMed

Engelhardt, Lucas; Röhm, Martina; Mavoungou, Chrystelle; Schindowski, Katharina; Schafmeister, Annette; Simon, Ulrich

2016-06-01

Aerosol particle deposition in the human nasal cavity is of high interest in particular for intranasal central nervous system (CNS) drug delivery via the olfactory cleft. The objective of this study was the development and comparison of a numerical and experimental model to investigate various parameters for olfactory particle deposition within the complex anatomical nasal geometry. Based on a standardized nasal cavity, a computational fluid and particle dynamics (CFPD) model was developed that enables the variation and optimization of different parameters, which were validated by in vitro experiments using a constructed rapid-prototyped human nose model. For various flow rates (5 to 40 l/min) and particle sizes (1 to 10 μm), the airflow velocities, the calculated particle airflow patterns and the particle deposition correlated very well with the experiment. Particle deposition was investigated numerically by varying particle sizes at constant flow rate and vice versa assuming the particle size distribution of the used nebulizer. The developed CFPD model could be directly translated to the in vitro results. Hence, it can be applied for parameter screening and will contribute to the improvement of aerosol particle deposition at the olfactory cleft for CNS drug delivery in particular for biopharmaceuticals.