Sample records for valmra ergo metsla

  1. The End of Academia?: From "Cogito Ergo Sum" to "Consumo Ergo Sum" Germany and Malaysia in Comparison

    ERIC Educational Resources Information Center

    Lim, Kim-Hui,; Har, Wai-Mun

    2008-01-01

    The lack of academic and thinking culture is getting more worried and becomes a major challenge to our academia society this 21st century. Few directions that move academia from "cogito ergo sum" to "consumo ergo sum" are actually leading us to "the end of academia". Those directions are: (1) the death of dialectic;…

  2. Timelike Killing vectors and ergo surfaces in non-asymptotically flat spacetimes

    NASA Astrophysics Data System (ADS)

    Pelavas, N.

    2005-02-01

    Ergo surfaces are investigated in spacetimes with a cosmological constant. We find the existence of multiple timelike Killing vectors, each corresponding to a distinct ergo surface, with no one being preferred. Using a kinematic invariant, which provides a measure of hypersurface orthogonality, we explore its potential role in selecting a preferred timelike Killing vector and consequently a unique ergo surface.

  3. Properties of the instantaneous ergo surface of a Kerr black hole

    NASA Astrophysics Data System (ADS)

    Pelavas, Nicos; Neary, Nicholas; Lake, Kayll

    2001-04-01

    {This paper explores properties of the instantaneous ergo surface of a Kerr black hole. The surface area is evaluated in closed form. In terms of the mass (m) and angular velocity (a), to second order in a, the area of the ergo surface is given by 16πm2 + 4πa2 (compared to the familiar 16πm2-4πa2 for the event horizon). Whereas the total curvature of the instantaneous event horizon is 4π, on the ergo surface it ranges from 4π (for a = 0) to 0 (for a = m) due to conical singularities on the axis (θ = 0,π) of deficit angle 2π(1-(1-(a/m)2)1/2). A careful application of the Gauss-Bonnet theorem shows that the ergo surface remains topologically spherical. Isometric embeddings of the ergo surface in Euclidean 3-space are defined for 0≤a/m≤1 (compared to 0≤a/m≤(3)1/2/2 for the horizon).

  4. Ergonomics and workplace design: application of Ergo-UAS System in Fiat Group Automobiles.

    PubMed

    Vitello, M; Galante, L G; Capoccia, M; Caragnano, G

    2012-01-01

    Since 2008 Fiat Group Automobiles has introduced Ergo-UAS system for the balancing of production lines and to detect ergonomic issues. Ergo-UAS system integrates 2 specific methods: MTM-UAS for time measurement and EAWS as ergonomic method to evaluate biomechanical effort for each workstation. Fiat is using a software system to manage time evaluation and ergo characterization of production cycle (UAS) to perform line balancing and obtain allowance factor in all Italian car manufacturing plant. For new car models, starting from New Panda, FGA is applying Ergo-UAS for workplace design since the earliest phase of product development. This means that workplace design is based on information about new product, new layout, new work organization and is performed by a multidisciplinary team (Work Place Integration Team), focusing on several aspects of product and process: safety, quality and productivity. This allows to find and solve ergonomic threats before the start of production, by means of a strict cooperation between product development, engineering and design, manufacturing. Three examples of workstation design are presented in which application of Ergo-UAS was determinant to find out initial excessive levels of biomechanical load and helped the process designer to improve the workstations and define limits of acceptability. Technical activities (on product or on process), or organizational changes, that have been implemented in order to solve the problems are presented. A comparison between "before" and "new" ergonomic scores necessary to bring workstations in acceptable conditions were made.

  5. ErgoTMC, A New Tool For Human-Centered TMC Design

    DOT National Transportation Integrated Search

    2000-04-01

    The Federal Highway Administration (FHWA) has recently made available a new tool to assist Transportation Management Center (TMC) managers and designers in incorporating human-centered design principles into their TMCs. ErgoTMC, a web site tailored t...

  6. ERGO grown on Ni-Cu foam frameworks by constant potential method as high performance electrodes for supercapacitors

    NASA Astrophysics Data System (ADS)

    Mirzaee, Majid; Dehghanian, Changiz; Sabet Bokati, Kazem

    2018-04-01

    This study presents composite electrode materials based on Electrochemically Reduced graphene oxide (ERGO) and Ni-Cu Foam for supercapacitor applications. Constant potential (CP) method was used to form reduced graphene oxide on Ni-Cu foam and characterized by scanning electron microscopy (SEM), powder X-ray diffraction (XRD), X-Ray Photoelectron Spectra (XPS), Raman Spectroscopy and electrochemical measurements. ERGO improves the electrical conduction leading to decrease of the internal resistance of the heterostructure. The ERGO served as a conductive network to facilitate the collection and transportation of electrons during the cycling, improved the conductivity of Ni-Cu foam, and allowed for a larger specific surface area. The irregular porous structure allowed for the easy diffusion of the electrolyte into the inner region of the electrode. Moreover, the nanocomposite directly fabricated on Ni-Cu foam with a better adhesion and avoided the use of polymer binder. This method efficiently reduced ohmic polarization and enhanced the rate capability. As a result, the Ni-Cu foam/ERGO nanocomposite exhibited a specific capacitance of 1259.3 F g-1 at 2 A g-1and about 99.3% of the capacitance retained after 5000 cycles. The capacitance retention was about 3% when the current density increased from 2 A g-1 to 15 A g-1. This two-step process drop cast and GO reduction by potentiostatic method is nontoxic and scalable and holds promise for improved energy density from redox capacitance in comparison with the conventional double layer supercapacitors.

  7. Consumer demand as a driver of improved working conditions: the 'Ergo-Brand' proposition.

    PubMed

    Neumann, W Patrick; Dixon, Shane M; Nordvall, Anna-Carin

    2014-01-01

    This article develops and explores the 'Ergo-Brand' proposition, which posits that consumers may prefer to buy goods that are made under good working conditions (GWCs). This preference would enhance a differentiation strategy for companies, thereby fostering the application of ergonomics in production. This proposition is developed in the context of a narrative review of the literature on 'ethical consumerism'. This is supplemented with a survey study, conducted in both Canada and Sweden (n = 141) to explore this proposition. Results indicate that consumers would prefer goods made under GWCs, but not unconditionally as quality and price concerns were ranked higher. Access to information on the working conditions in production was seen as a barrier. Nevertheless, the Ergo-Brand concept may be a viable avenue in promoting attention towards ergonomics in companies - particularly if consumer habits are subject to intervention by advertising. Further research on this strategy is warranted.

  8. Interest of the Ergo-Kit(®) for the clinical practice of the occupational physician. A study of 149 patients recruited in a rehabilitation program.

    PubMed

    Caron, J; Ronzi, Y; Bodin, J; Richard, I; Bontoux, L; Roquelaure, Y; Petit, A

    2015-10-01

    Functional capacity evaluation is commonly used to assess the abilities of patients to perform some tasks. Ergo-Kit(®) is a validated tool assessing both functional capacities of patients and workplace demands. The objective of this study was to evaluate the relevance of the Ergo-Kit(®) data for occupational physicians during the return-to-work process. A retrospective and monocenter study was conducted on all patients included in a rehabilitation program and assessed with the Ergo-Kit(®) tool between 2005 and 2014. Workplace demands and patients' functional capacities were evaluated and confronted. Self-beliefs and perceived disability were also assessed and compared to the functional capacity evaluation. One hundred and forty-nine working-age patients (85 men, 64 women; 39±12 years) suffering from musculoskeletal disorders or other diseases were included. Main causes of mismatch between workplace demands and functional capacities were manual handling of loads, postures with arms away from the body and repetitive motions at work; sitting posture was correlated with a lesser physical workload; and Oswestry score was correlated with functional capacities evaluated by the Ergo-Kit(®). Ergo-Kit(®) is a relevant tool to assess the multidimensional aspects of workplace demands and functional capacities. It could be very helpful for occupational physicians to manage return-to-work. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  9. Modification of working conditions based on ergo THK reducing workload, muscle tension, and fatigue of rice milling workers in J village

    NASA Astrophysics Data System (ADS)

    Ruliati, L. P.; Adiputra, N.; Sutjana, I. D. P.; Sutajaya, I. M.

    2017-11-01

    Rice mill is one of the businesses in informal sector. From the rice milling process, ergonomic problems arise when employees work with bent position that done repeatedly to lift grain sacks to be transferred to peeler machine. This situation will affect the comfort of work, thus increasing the workload, muscle tension, and fatigue. The consequence will certainly affect the health and productivity of workers. In this study introduces ergo Tri Hita Karana (ergo THK) as an ergonomics intervention model which solves ergonomics problems of the cultural aspects of THK. The study aim is to determine the modification of working conditions based Ergo THK to reduce workload, muscle tension and fatigue. This research uses Randomized Pretest and Posttest Control Group Design experimental design. The subjects were 30 male rice mill workers with an age range of 16 until 56 years, and then divided into 15 subjects in the control group and 15 subjects in the treatment group. The results showed that the average posttest workloads in the control group are 136.950 more less 0.297 and in the treatment group are 107.60 more less 0.396. Significance analysis showed that after the two groups done their activities, the average workload significantly different p less than 0.005. The amount of reduction in the workload between the two groups was 21.43 percent. In muscle tension posttest showed that the mean score of the muscle tension in the control group was 62.67 more less 7.31 and the treatment group was 20.96 more less 2.96. Significance analysis showed that both groups mean muscle-tension results were significantly different p less than 0.005. The amount of reduction in tension between the control group and the treatment group while working was 66.55 percent. At fatigue posttest showed that the mean score of fatigue in the control group was 76.40 more less 13.51 and the treatment group was 55.53 more less 9.51. Significant analysis showed that the mean fatigue of both groups

  10. ERGO: A pilot study of ketogenic diet in recurrent glioblastoma

    PubMed Central

    RIEGER, JOHANNES; BÄHR, OLIVER; MAURER, GABRIELE D.; HATTINGEN, ELKE; FRANZ, KEA; BRUCKER, DANIEL; WALENTA, STEFAN; KÄMMERER, ULRIKE; COY, JOHANNES F.; WELLER, MICHAEL; STEINBACH, JOACHIM P.

    2014-01-01

    Limiting dietary carbohydrates inhibits glioma growth in preclinical models. Therefore, the ERGO trial (NCT00575146) examined feasibility of a ketogenic diet in 20 patients with recurrent glioblastoma. Patients were put on a low-carbohydrate, ketogenic diet containing plant oils. Feasibility was the primary endpoint, secondary endpoints included the percentage of patients reaching urinary ketosis, progression-free survival (PFS) and overall survival. The effects of a ketogenic diet alone or in combination with bevacizumab was also explored in an orthotopic U87MG glioblastoma model in nude mice. Three patients (15%) discontinued the diet for poor tolerability. No serious adverse events attributed to the diet were observed. Urine ketosis was achieved at least once in 12 of 13 (92%) evaluable patients. One patient achieved a minor response and two patients had stable disease after 6 weeks. Median PFS of all patients was 5 (range, 3–13) weeks, median survival from enrollment was 32 weeks. The trial allowed to continue the diet beyond progression. Six of 7 (86%) patients treated with bevacizumab and diet experienced an objective response, and median PFS on bevacizumab was 20.1 (range, 12–124) weeks, for a PFS at 6 months of 43%. In the mouse glioma model, ketogenic diet alone had no effect on median survival, but increased that of bevacizumab-treated mice from 52 to 58 days (p<0.05). In conclusion, a ketogenic diet is feasible and safe but probably has no significant clinical activity when used as single agent in recurrent glioma. Further clinical trials are necessary to clarify whether calorie restriction or the combination with other therapeutic modalities, such as radiotherapy or anti-angiogenic treatments, could enhance the efficacy of the ketogenic diet. PMID:24728273

  11. Redesigning the work system of rubber industries based on total ergonomics and ergo-micmac integration

    NASA Astrophysics Data System (ADS)

    Setiawan, H.

    2018-01-01

    The factory capacity achievement and the bottleneck reduction of production process at wet-blanket workstations are influenced by the balance of life quality rates and worker’s productivity, along with the worker’s ability and limitations, tasks, organization and work environment. The life quality of workers is indicated by: the reduction of workload, and fatigue. Meanwhile, work productivity is measured by increasing production results per work shift. The optimization of the quality of life and productivity of workers is achieved by redesigning the system and workstations based on ergonomics integrating Total Ergonomics with Ergo-MicMac (Micro Ergonomics and Macro Ergonomics), which includes redesigning wet-blanket folding worktable, regulating the system pattern of working in pairs, giving official break time, giving extra nutritious intakes such as sweet tea and snack Pempek, giving personal protective equipments, and redesigning physical working environments.This study was an experimental study, with treatment by subject design involving 30 workers sampled at a workstation condition before and after Ergonomics based redesign. The findings and conclusions of the study were derived from the reduction of the workload by 16.06%, fatigue by 18.84% and the increase of production results per work shift by 20.29%.

  12. Effect of morphology and defect density on electron transfer of electrochemically reduced graphene oxide

    NASA Astrophysics Data System (ADS)

    Zhang, Yan; Hao, Huilian; Wang, Linlin

    2016-12-01

    Electrochemically reduced graphene oxide (ERGO) is widely used to construct electrochemical sensors. Understanding the electron transfer behavior of ERGO is essential for its electrode material applications. In this paper, different morphologies of ERGO were prepared via two different methods. Compared to ERGO/GCEs prepared by electrochemical reduction of pre-deposited GO, more exposed edge planes of ERGO are observed on the surface of ERGO-GCE that was constructed by electrophoretic deposition of GO. The defect densities of ERGO were controlled by tuning the mass or concentration of GO. The electron transfer kinetics (k0) of GCE with different ERGOs was comparatively investigated. Owing to increased surface areas and decreased defect density, the k0 values of ERGO/GCE initially increase and then decrease with incrementing of GO mass. When the morphology and surface real areas of ERGO-GCE are the same, an increased defect density induces an accelerated electron transfer rate. k0 valuesof ERGO-GCEs are about 1 order of magnitude higher than those of ERGO/GCEs due to the difference in the amount of edge planes. This work demonstrates that both defect densities and edge planes of ERGO play crucial roles in electron transfer kinetics.

  13. Nonvolatile Taste Components and Antioxidant Properties of Fruiting Body and Mycelium with High Ergothioneine Content from the Culinary-Medicinal Golden Oyster Mushroom Pleurotus citrinopileatus (Agaricomycetes).

    PubMed

    Lin, Shin-Yi; Chien, Shih-Chang; Wang, Sheng-Yang; Mau, Jeng-Leun

    2016-01-01

    Pleurotus citrinopileatus mycelium was prepared with high ergothioneine (Hi-Ergo) content and its proximate composition, nonvolatile taste components, and antioxidant properties were studied. The ergothioneine contents of fruiting bodies and Hi-Ergo and regular mycelia were 3.89, 14.57, and 0.37 mg/g dry weight, respectively. Hi-Ergo mycelium contained more dietary fiber, soluble polysaccharides, and ash but less carbohydrates, reducing sugar, fiber, and fat than regular mycelium. However, Hi-Ergo mycelium contained the smallest amounts of total sugars and polyols (47.43 mg/g dry weight). In addition, Hi-Ergo mycelium showed the most intense umami taste. On the basis of the half-maximal effective concentration values obtained, the 70% ethanolic extract from Hi-Ergo mycelium showed the most effective antioxidant activity, reducing power, and scavenging ability, whereas the fruiting body showed the most effective antioxidant activity, chelating ability, and Trolox-equivalent antioxidant capacity. Overall, Hi-Ergo mycelium could be beneficially used as a food-flavoring material or as a nutritional supplement.

  14. Reduced graphene oxide hydrogels deposited in nickel foam for supercapacitor applications: Toward high volumetric capacitance

    DOE PAGES

    Pham, Viet Hung; Dickerson, James H.

    2016-02-21

    Graphene hydrogels have been considered as ideal materials for high-performance supercapacitors. However, their low volumetric capacitance significantly limits its real application. In this study, we report an environment-friendly and scalable method to prepare high packing density, electrochemically reduced graphene oxide hydrogels (ERGO) for supercapacitor application by the electrophoretic deposition of graphene oxide onto nickel foam, followed by the electrochemical reduction and hydraulic compression of the deposited materials. The as-prepared ERGO on nickel foam was hydraulic compressed up to 20 tons, resulting in an increase of the packing density of ERGO from 0.0098 to 1.32 g cm –3. Consequently, the volumetricmore » capacitance and volumetric energy density of ERGOs greatly increased from 1.58 F cm –3 and 0.053 Wh cm –3 (as-prepared ERGO) to 176.5 F cm –3 and 6.02 Wh cm –3 (ERGO compressed at 20 tons), respectively. The ERGOs also exhibited long-term electrochemical stability with a capacitance retention in the range of approximately 79–90% after 10 000 cycles. Lastly, we believe that these high packing density ERGOs are promising for real-world energy storage devices for which scalable, cost-effective manufacturing is of significance and for which space constraints are paramount.« less

  15. Reduced graphene oxide hydrogels deposited in nickel foam for supercapacitor applications: Toward high volumetric capacitance

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pham, Viet Hung; Dickerson, James H.

    Graphene hydrogels have been considered as ideal materials for high-performance supercapacitors. However, their low volumetric capacitance significantly limits its real application. In this study, we report an environment-friendly and scalable method to prepare high packing density, electrochemically reduced graphene oxide hydrogels (ERGO) for supercapacitor application by the electrophoretic deposition of graphene oxide onto nickel foam, followed by the electrochemical reduction and hydraulic compression of the deposited materials. The as-prepared ERGO on nickel foam was hydraulic compressed up to 20 tons, resulting in an increase of the packing density of ERGO from 0.0098 to 1.32 g cm –3. Consequently, the volumetricmore » capacitance and volumetric energy density of ERGOs greatly increased from 1.58 F cm –3 and 0.053 Wh cm –3 (as-prepared ERGO) to 176.5 F cm –3 and 6.02 Wh cm –3 (ERGO compressed at 20 tons), respectively. The ERGOs also exhibited long-term electrochemical stability with a capacitance retention in the range of approximately 79–90% after 10 000 cycles. Lastly, we believe that these high packing density ERGOs are promising for real-world energy storage devices for which scalable, cost-effective manufacturing is of significance and for which space constraints are paramount.« less

  16. Unusual attempt to direct the growth of bimetallic Ag@Pt nanorods on electrochemically reduced graphene oxide nanosheets by electroless exchange of Cu by Pt for an efficient alcohol oxidation

    NASA Astrophysics Data System (ADS)

    Jeena, S. E.; Gnanaprakasam, P.; Selvaraju, T.

    2017-01-01

    A simple and an efficient tool for the direct growth of bimetallic Ag@Pt nanorods (NRDs) on electrochemically reduced graphene oxide (ERGO) nanosheets was developed at glassy carbon electrode (GCE). Initially, Cu shell was grown on Ag core as Ag@Cu NRD by the seed-mediated growth method. Accordingly, Cu shell has been successfully replaced by Pt using the electroless galvanic replacement method with ease by effective functionalization of L-tryptophan on ERGO surface (L-ERGO), which eventually plays an important role in the direct growth of one-dimensional bimetallic NRDs. As a result, the synthesized Ag@Pt NRD-supported L-ERGO nanosheets (Ag@Pt NRDs/L-ERGO/GCE) were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy-dispersive X-ray analysis (EDAX) and Raman spectroscopy. Anodic stripping voltammetry was used to explore its electrochemical properties. Finally, the developed bimetallic Ag@Pt NRDs/L-ERGO/GCEs were studied as a better electrocatalyst compared to the commercial catalysts such as Pt40/C or Pt20/C-loaded electrode for the oxidation of ethanol or methanol with a high tolerance level and an enhanced current density. In addition, the long-term stability was studied using chronoamperometry for 1000 s at the bimetallic NRD electrode for alcohol oxidation which impedes the fouling properties. The unfavourable and favourable electrooxidation of ethanol at Ag@Cu NRDs/L-ERGO/GCE (a) and Ag@Pt NRDs/L-ERGO/GCE (b) is discussed. The synergistic effect of Ag core and catalytic properties of Pt shell at Ag@Pt NRDs/L-ERGO/GCE tend to strongly minimize the CO poisoning effect and enhanced ethanol electrooxidation.

  17. Solid-phase electrochemical reduction of graphene oxide films in alkaline solution

    NASA Astrophysics Data System (ADS)

    Basirun, Wan J.; Sookhakian, Mehran; Baradaran, Saeid; Mahmoudian, Mohammad R.; Ebadi, Mehdi

    2013-09-01

    Graphene oxide (GO) film was evaporated onto graphite and used as an electrode to produce electrochemically reduced graphene oxide (ERGO) films by electrochemical reduction in 6 M KOH solution through voltammetric cycling. Fourier transformed infrared and Raman spectroscopy confirmed the presence of ERGO. Electrochemical impedance spectroscopy characterization of ERGO and GO films in ferrocyanide/ferricyanide redox couple with 0.1 M KCl supporting electrolyte gave results that are in accordance with previous reports. Based on the EIS results, ERGO shows higher capacitance and lower charge transfer resistance compared to GO.

  18. Electrochemical behavior and voltammetric determination of acetaminophen based on glassy carbon electrodes modified with poly(4-aminobenzoic acid)/electrochemically reduced graphene oxide composite films.

    PubMed

    Zhu, Wencai; Huang, Hui; Gao, Xiaochun; Ma, Houyi

    2014-12-01

    Poly(4-aminobenzoic acid)/electrochemically reduced graphene oxide composite film modified glassy carbon electrodes (4-ABA/ERGO/GCEs) were fabricated by a two-step electrochemical method. The electrochemical behavior of acetaminophen at the modified electrode was investigated by means of cyclic voltammetry. The results indicated that 4-ABA/ERGO composite films possessed excellent electrocatalytic activity towards the oxidation of acetaminophen. The electrochemical reaction of acetaminophen at 4-ABA/ERGO/GCE is proved to be a surface-controlled process involving the same number of protons and electrons. The voltammetric determination of acetaminophen performed with the 4-ABA/ERGO modified electrode presents a good linearity in the range of 0.1-65 μM with a low detection limit of 0.01 μM (S/N=3). In the case of using the 4-ABA/ERGO/GCE, acetaminophen and dopamine can be simultaneously determined without mutual interference. Furthermore, the 4-ABA/ERGO/GCE has good reproducibility and stability, and can be used to determine acetaminophen in tablets. Copyright © 2014 Elsevier B.V. All rights reserved.

  19. SPREADSHEET-BASED PROGRAM FOR ERGONOMIC ADJUSTMENT OF NOTEBOOK COMPUTER AND WORKSTATION SETTINGS.

    PubMed

    Nanthavanij, Suebsak; Prae-Arporn, Kanlayanee; Chanjirawittaya, Sorajak; Paripoonyo, Satirajit; Rodloy, Somsak

    2015-06-01

    This paper discusses a computer program, ErgoNBC, which provides suggestions regarding the ergonomic settings of a notebook computer (NBC), workstation components, and selected accessories in order to help computer users to assume an appropriate work posture during the NBC work. From the users' body height, NBC and workstation component data, ErgoNBC computes the recommended tilt angle of NBC base unit, NBC screen angle, distance between the user and NBC, seat height and work surface height. If necessary, the NBC base support, seat cushion and footrest, including their settings, are recommended. An experiment involving twenty-four university students was conducted to evaluate the recommendations provided by ErgoNBC. The Rapid Upper Limb Assessment (RULA) technique was used to analyze their work postures both before and after implementing the Ergo NBC's recommendations. The results clearly showed that ErgoNBC could significantly help to improve the subjects' work postures.

  20. Comparative studies on single-layer reduced graphene oxide films obtained by electrochemical reduction and hydrazine vapor reduction

    NASA Astrophysics Data System (ADS)

    Wang, Zhijuan; Wu, Shixin; Zhang, Juan; Chen, Peng; Yang, Guocheng; Zhou, Xiaozhu; Zhang, Qichun; Yan, Qingyu; Zhang, Hua

    2012-02-01

    The comparison between two kinds of single-layer reduced graphene oxide (rGO) sheets, obtained by reduction of graphene oxide (GO) with the electrochemical method and hydrazine vapor reduction, referred to as E-rGO and C-rGO, respectively, is systematically studied. Although there is no morphology difference between the E-rGO and C-rGO films adsorbed on solid substrates observed by AFM, the reduction process to obtain the E-rGO and C-rGO films is quite different. In the hydrazine vapor reduction, the nitrogen element is incorporated into the obtained C-rGO film, while no additional element is introduced to the E-rGO film during the electrochemical reduction. Moreover, Raman spectra show that the electrochemical method is more effective than the hydrazine vapor reduction method to reduce the GO films. In addition, E-rGO shows better electrocatalysis towards dopamine than does C-rGO. This study is helpful for researchers to understand these two different reduction methods and choose a suitable one to reduce GO based on their experimental requirements.

  1. A multimedia case based approach to the study of office ergonomics.

    PubMed

    August-Dalfen, Sharon; Snider, Laurie

    2003-01-01

    Multimedia technology has the capacity to provide students with an interactive approach to problem based learning and to bridge the gap between theoretical knowledge and clinical practice. The present paper describes the design and development of the program ErgoROM, a CD which presents a case study to assist occupational therapy students in their studies of office ergonomics. A pilot study showed that overall, 91% of respondents rated the ErgoROM as either "Excellent" or "Very Good". Additionally they reported that ErgoROM had a positive impact on active learning and critical thinking.

  2. Reduced Graphene Oxide/Carbon Nanotube Composites as Electrochemical Energy Storage Electrode Applications.

    PubMed

    Yang, Wenyao; Chen, Yan; Wang, Jingfeng; Peng, Tianjun; Xu, Jianhua; Yang, Bangchao; Tang, Ke

    2018-06-15

    We demonstrate an electrochemical reduction method to reduce graphene oxide (GO) to electrochemically reduced graphene oxide (ERGO) with the assistance of carbon nanotubes (CNTs). The faster and more efficient reduction of GO can be achieved after proper addition of CNTs into GO during the reduction process. This nanotube/nanosheet composite was deposited on electrode as active material for electrochemical energy storage applications. It has been found that the specific capacitance of the composite film was strongly affected by the mass ratio of GO/CNTs and the scanning ratio of cyclic voltammetry. The obtained ERGO/CNT composite electrode exhibited a 279.4 F/g-specific capacitance and showed good cycle rate performance with the evidence that the specific capacitance maintained above 90% after 6000 cycles. The synergistic effect between ERGO and CNTs as well as crossing over of CNTs into ERGO is attributed to the high electrochemical performance of composite electrode.

  3. Green ergonomics: combining sustainability and ergonomics.

    PubMed

    Pilczuk, Davana; Barefield, Kevin

    2014-01-01

    When discussing ergonomics, the term 'sustainability' usually refers to the preservation of the human workforce. However, in 2010 Gulfstream Aerospace Corporation made a conscious effort to combine ergonomics and environmental sustainability in order to increase employee engagement for both programs. They introduced a companywide campaign called Green Ergo which is the idea of creating ergonomic solutions from scrap material found on site. This concept embraced the true meaning of 'green' and encouraged engineers and employees all across the company to design innovative green ergonomic solutions. The idea generated over 35 new ergo solutions, reduced waste production, and solved over 700 ergo problems for a fraction of the cost of newly purchased items. The demand for these items grew large enough that the company outsourced their manufacturing to a local non-profit. The Green Ergo campaign has changed the culture of the company and has increased the level of buy-in for both the ergonomics and sustainability programs.

  4. A facile approach to prepare crumpled CoTMPyP/electrochemically reduced graphene oxide nanohybrid as an efficient electrocatalyst for hydrogen evolution reaction

    NASA Astrophysics Data System (ADS)

    Ma, Juanjuan; Liu, Lin; Chen, Qian; Yang, Min; Wang, Danping; Tong, Zhiwei; Chen, Zhong

    2017-03-01

    Elaborate design and synthesis of efficient and stable non-Pt electrocatalysts for some renewable energy related conversion/storage processes are one of the major goals of sustainable chemistry. Herein, we report a facile method to fabricate Co porphyrin functionalized electrochemically reduced graphene oxide (CoTMPyP/ERGO) thin film by direct assembly of oppositely charged tetrakis(N-methylpyridyl) porphyrinato cobalt (CoTMPyP) and GO nanosheets under mild conditions followed by an electrochemical reduction procedure. STEM analysis confirms that CoTMPyP nanoaggregates are homogeneously distributed over the graphene surface. The electrochemical properties of CoTMPyP/ERGO were investigated by cyclic voltammetry, linear sweep voltammetry and electrochemical impedance spectroscopy. The results demonstrate that CoTMPyP/ERGO nanohybrid film can serve as excellent electrocatalyst for hydrogen evolution in alkaline solution with high activity and stability. The intimate contact and efficient electron transfer between CoTMPyP and ERGO, as well as the crumpled structure, contribute to the improvement of the electrocatalytic performance.

  5. Face, content, and construct validity of a novel portable ergonomic simulator for basic laparoscopic skills.

    PubMed

    Xiao, Dongjuan; Jakimowicz, Jack J; Albayrak, Armagan; Buzink, Sonja N; Botden, Sanne M B I; Goossens, Richard H M

    2014-01-01

    Laparoscopic skills can be improved effectively through laparoscopic simulation. The purpose of this study was to verify the face and content validity of a new portable Ergonomic Laparoscopic Skills simulator (Ergo-Lap simulator) and assess the construct validity of the Ergo-Lap simulator in 4 basic skills tasks. Four tasks were evaluated: 2 different translocation exercises (a basic bimanual exercise and a challenging single-handed exercise), an exercise involving tissue manipulation under tension, and a needle-handling exercise. Task performance was analyzed according to speed and accuracy. The participants rated the usability and didactic value of each task and the Ergo-Lap simulator along a 5-point Likert scale. Institutional academic medical center with its affiliated general surgery residency. Forty-six participants were allotted into 2 groups: a Novice group (n = 26, <10 clinical laparoscopic procedures) and an Experienced group (n = 20, >50 clinical laparoscopic procedures). The Experienced group completed all tasks in less time than the Novice group did (p < 0.001, Mann-Whitney U test). The Experienced group also completed tasks 1, 2, and 4 with fewer errors than the Novice group did (p < 0.05). Of the Novice participants, 96% considered that the present Ergo-Lap simulator could encourage more frequent practice of laparoscopic skills. In addition, 92% would like to purchase this simulator. All of the experienced participants confirmed that the Ergo-Lap simulator was easy to use and useful for practicing basic laparoscopic skills in an ergonomic manner. Most (95%) of these respondents would recommend this simulator to other surgical trainees. This Ergo-Lap simulator with multiple tasks was rated as a useful training tool that can distinguish between various levels of laparoscopic expertise. The Ergo-Lap simulator is also an inexpensive alternative, which surgical trainees could use to update their skills in the skills laboratory, at home, or in the office

  6. Study of electrochemical reduced graphene oxide and MnO2 heterostructure for supercapacitor application

    NASA Astrophysics Data System (ADS)

    Jana, S. K.; Rao, V. P.; Banerjee, S.

    2013-02-01

    In this paper we have shown enhanced supercapacitive property of electrochemically reduced graphene oxide (ERGO) and manganese dioxide (MnO2) based heterostructure over single MnO2 thin film grown by electrochemical deposition on indium tin oxide (ITO). ERGO improves the electrical conduction leading to decrease of the internal resistance of the heterostructure.

  7. Virtual Representation of IID Observations in Bayesian Belief Networks

    DTIC Science & Technology

    1994-04-01

    programs for structuring and using Bayesian inference include ERGO ( Noetic Systems, Inc., 1991) and HUGIN (Andersen, Jensen, Olesen, & Jensen, 1989...Nichols, S.. Chipman, & R. Brennan (Eds.), Cognitively diagnostic assessment. Hillsdale, NJ: Erlbaum. Noetic Systems, Inc. (1991). ERGO [computer...Dr Geore Eageiard Jr Chicago IL 60612 US Naval Academy Division of Educational Studies Annapolis MD 21402-5002 Emory University Dr Janice Gifford 210

  8. Information-Decay Pursuit of Dynamic Parameters in Student Models

    DTIC Science & Technology

    1994-04-01

    simple worked-through example). Commercially available computer programs for structuring and using Bayesian inference include ERGO ( Noetic Systems...Tukey, J.W. (1977). Data analysis and Regression: A second course in statistics. Reading, MA: Addison-Wesley. Noetic Systems, Inc. (1991). ERGO...Naval Academy Division of Educational Studies Annapolis MD 21402-5002 Elmory Univerity Dr Janice Gifford 210 Fiabburne Bldg University of

  9. More Ergo, Less Aargh!

    ERIC Educational Resources Information Center

    Roy, Ken

    2005-01-01

    Unless the teacher is working at an ergonomically designed workstation, using a computer can result in eyestrain, neck aches, backaches, and headaches. Unfortunately, most teachers do their keyboarding at desks, on lab tables, and in other spaces that were not designed with computer use in mind. Ergonomics is the science of adapting workstations,…

  10. Enhanced electrocatalytic activity of graphene-gold nanoparticles hybrids for peroxynitrite electrochemical detection on hemin-based electrode.

    PubMed

    Wang, Beibei; Ji, Xueping; Ren, Jujie; Ni, Ruixing; Wang, Lin

    2017-12-01

    A simple, ultrasensitive peroxynitrite anion (ONOO - ) electrochemical sensing platform was developed by immobilizing hemin on a density controllable electrochemically reduced graphene oxide-Au nanoparticles (ERGO-AuNPs) nanohybrids. The ERGO-AuNPs in situ nanohybrids were produced onto a glass carbon electrode (GCE) by one-step electrodeposition, the density of which could be easily controlled by electrodeposited time. The morphology of ERGO-AuNPs nanohybrids was characterized by a scanning electron microscope (SEM). The ERGO-AuNPs nanohybrids showed a high electrocatalytic activity for immobilized-hemin, because the nanostructures hybrids could effectively promote electron transfer rate between hemin and the electrode. Due to nanohybrids-enhanced catalytic effect for hemin, they were firstly selected for use as a highly sensitive electrochemical platform for ONOO - detection. The resulted sensor showed a high electrocatalytic activity toward ONOO - oxidation, being free from the electroactive interferents, including nitrite, nitrate, dopamine and uric acid at an applied potential of 0.7V. The sensor exhibited a high sensitivity of 123.1nAμM -1 and a lower detection limit of 0.1μM, and a wide linear range of 2.4×10 -6 to 5.5×10 -5 M, which could be attributed to the synergy between ERGO and AuNPs in hybrids. The nanohybrids in situ preparation and ONOO - detection methods would be beneficial to developing other sensing interface and have promising applications in biological molecules analysis and clinical diagnostic. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Electrodeposited reduced graphene oxide incorporating polymerization of l-lysine on electrode surface and its application in simultaneous electrochemical determination of ascorbic acid, dopamine and uric acid.

    PubMed

    Zhang, Dongdong; Li, Lingzhi; Ma, Weina; Chen, Xia; Zhang, Yanmin

    2017-01-01

    This paper demonstrates a novel strategy for the construction of a graphene hybrid composites film, which was fabricated by electrodeposited reduced graphene oxide (ERGO) incorporating polymerization of l-lysine (PLL) onto glassy carbon electrode (GCE). Here we show that graphene films can be prepared on electrodes directly from GO dispersions by one-step electrodeposition technique based on electropolymerized PLL as a positively charged polymer interface to adsorb negatively charged GO nanosheets through electrostatic attraction. The thickness of graphene film can be easily controlled by using the electrodeposition technique, a distinct advantage over previously developed methods. The electrochemically reduced process of GO and electropolymerization of l-lysine were investigated by cyclic voltammetry with a wide potential range. The surface morphology of the modified electrode was characterized by scanning electron microscopy. The ERGO/PLL/GCE shows conducive to electron transfer kinetics for Fe(CN) 6 3- /Fe(CN) 6 4- redox probes, compared with bare GCE, PLL/GCE and ERGO/GCE. The electrochemical behaviors of ascorbic acid (AA), dopamine (DA) and uric acid (UA) at ERGO/PLL/GCE were investigated by cyclic voltammetry, and the results suggest that the modified electrode exhibits enhanced electrocatalytic activity toward these important molecules. Under physiological condition and in the co-existence system of AA, DA and UA, the ERGO/PLL/GCE showed linear voltammetric responses in the concentration of 100μM-1200μM for AA, 2.0μM-60μM for DA and 20μM-200μM for UA, and with the detection limits (S/N=3) of 2.0μM, 0.10μM and 0.15μM for AA, DA and UA, respectively. The developed method has been applied to simultaneous determination of AA, DA and UA in human urine with satisfactory recoveries of 104.2%, 95.4% and 99.9%, respectively. This work demonstrates that the attractive features of ERGO/PLL provide promising applications in simultaneous determination of AA, DA

  12. In situ electrochemical synthesis of highly loaded zirconium nanoparticles decorated reduced graphene oxide for the selective determination of dopamine and paracetamol in presence of ascorbic acid.

    PubMed

    Ezhil Vilian, A T; Rajkumar, Muniyandi; Chen, Shen-Ming

    2014-03-01

    Highly loaded zirconium oxide (ZrO2) nanoparticles were supported on graphene oxide (ERGO/ZrO2) via an in situ, simple and clean strategy on the basis of the electrochemical redox reaction between zirconyl chloride and graphene oxide (ZrOCl2 and GO). The electrochemical measurements and surface morphology of the as prepared nanocomposite were studied using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and field emission scanning electron microscopy (FESEM). This ZrO2 decorated reduced graphene oxide nanocomposite modified GCE (ERGO/ZrO2) exhibits a prominent electrocatalytic activity toward the selective detection and determination of dopamine (DA) and paracetamol (PA) in presence of ascorbic acid (AA). The peaks of linear sweep voltammetry (LSV) for DA and PA oxidation at ERGO/ZrO2 modified electrode surface were clearly separated from each other when they co-existed in the physiological pH (pH 7.0) with a potential value of 140 mV (between AA and DA) and 330 mV (between AA and PA). It was, therefore, possible to simultaneously determine DA and PA in the samples at ERGO/ZrO2 nanocomposite modified GCE. Linear calibration curves were obtained for 9-237 μM of PA and DA. The ERGO/ZrO2 nanocomposite electrode has been satisfactorily used for the determination of DA and PA in the presence of AA at pharmaceutical formulations in human urine samples with a linear range of 3-174 μM. The proposed biosensor shows a wide linear range, low detection limit, good reproducibility and acceptable stability, providing a biocompatible platform for bio sensing and bio catalysis. Copyright © 2013 Elsevier B.V. All rights reserved.

  13. Amplified electrochemiluminescence of quantum dots by electrochemically reduced graphene oxide for nanobiosensing of acetylcholine.

    PubMed

    Deng, Shengyuan; Lei, Jianping; Cheng, Lingxiao; Zhang, Yangyang; Ju, Huangxian

    2011-07-15

    A signal amplification system for electrochemiluminescence (ECL) of quantum dots (QDs) was developed by using electrochemically reduced graphene oxide (ERGO) to construct a nanobiosensing platform. Due to the structural defects of GO, the ECL emission of QDs coated on GO modified electrode was significantly quenched. After the electrochemical reduction of GO, the restoration of structural conjugation was observed with spectroscopic, morphologic and impedance techniques. Thus in the presence of dissolved O₂ as coreactant, the QDs/ERGO modified electrode showed ECL intensity increase by 4.2 and 178.9 times as compared with intrinsic QDs and QDs/GO modified electrodes due to the adsorption of dissolved O₂ on ERGO and the facilitated electron transfer. After choline oxidase (ChO) or ChO-acetylcholinesterase was further covalently cross-linked on the QDs/ERGO modified electrode, two ECL biosensors for choline and acetylcholine were fabricated, which showed the linear response ranges and detection limits of 10-210 μM and 8.8 μM for choline, and 10-250 μM and 4.7 μM for acetylcholine, respectively. This green and facile approach to prepare graphene-QDs system could be of potential applications in electronic device and bioanalysis. Copyright © 2011 Elsevier B.V. All rights reserved.

  14. An electrochemical sensor for gallic acid based on Fe₂O₃/electro-reduced graphene oxide composite: Estimation for the antioxidant capacity index of wines.

    PubMed

    Gao, Feng; Zheng, Delun; Tanaka, Hidekazu; Zhan, Fengping; Yuan, Xiaoning; Gao, Fei; Wang, Qingxiang

    2015-12-01

    A highly sensitive electrochemical sensor for gallic acid (GA), an important polyphenolic compound, was fabricated using the hybrid material of chitosan (CS), fishbone-shaped Fe2O3 (fFe2O3), and electrochemically reduced graphene oxide (ERGO) as the sensing matrix. The electrochemical characterization experiments showed that the CS-fFe2O3-ERGO modified glassy carbon electrode (CS-fFe2O3-ERGO/GCE) had large surface area, excellent electronic conductivity and high stability. The GA presented a superior electrochemical response on CS-fFe2O3-ERGO/GCE in comparison with the single-component modified electrode. The electrochemical mechanism and optimal test conditions of GA on the electrode surface were carefully investigated. Under the optimal conditions, the oxidation peak currents in differential pulse voltammetry (DPV) experiments exhibited a good linear relationship with the logarithmic values of GA concentration over the range from 1.0×10(-6)M to 1.0×10(-4)M. Based on signal-to-noise (S/N) characteristic of 3, the detection limit was estimated to be 1.5×10(-7)M. The proposed sensor has also been applied for estimating the antioxidant capacity index of real samples of red and white wines. Copyright © 2015 Elsevier B.V. All rights reserved.

  15. An Easily Fabricated Electrochemical Sensor Based on a Graphene-Modified Glassy Carbon Electrode for Determination of Octopamine and Tyramine

    PubMed Central

    Zhang, Yang; Zhang, Meiqin; Wei, Qianhui; Gao, Yongjie; Guo, Lijuan; Al-Ghanim, Khalid A.; Mahboob, Shahid; Zhang, Xueji

    2016-01-01

    A simple electrochemical sensor has been developed for highly sensitive detection of octopamine and tyramine by electrodepositing reduced graphene oxide (ERGO) nanosheets onto the surface of a glassy carbon electrode (GCE). The electrocatalytic oxidation of octopamine and tyramine is individually investigated at the surface of the ERGO modified glassy carbon electrode (ERGO/GCE) by using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Several essential factors including the deposition cycle of reduced graphene oxide nanosheets and the pH of the running buffer were investigated in order to determine the optimum conditions. Furthermore, the sensor was applied to the quantification of octopamine and tyramine by DPV in the concentration ranges from 0.5 to 40 μM and 0.1 to 25 μM, respectively. In addition, the limits of detection of octopamine and tyramine were calculated to be 0.1 μM and 0.03 μM (S/N = 3), respectively. The sensor showed good reproducibility, selectivity and stability. Finally, the sensor successfully detected octopamine and tyramine in commercially available beer with satisfactory recovery ranges which were 98.5%–104.7% and 102.2%–103.1%, respectively. These results indicate the ERGO/GCE based sensor is suitable for the detection of octopamine and tyramine. PMID:27089341

  16. Project UNITY: Cross Domain Visualization Collaboration

    DTIC Science & Technology

    2015-10-18

    location is at the Space Operations Coordination Center (UK-SPOCC) in High Wycombe, UK. Identical AFRL-developed ErgoWorkstations (see Figure 2) were...installed in both locations. The AFRL ErgoWorkstation is made up of a high performance Windows-based PC with three displays: two 30” Dell Cinema ...system can be seen in Figure 1. The intent of using identical hardware is to minimize complexity, to simplify debugging, and to provide an opportunity

  17. Organic Cation Transporter-Mediated Ergothioneine Uptake in Mouse Neural Progenitor Cells Suppresses Proliferation and Promotes Differentiation into Neurons

    PubMed Central

    Ishimoto, Takahiro; Nakamichi, Noritaka; Hosotani, Hiroshi; Masuo, Yusuke; Sugiura, Tomoko; Kato, Yukio

    2014-01-01

    The aim of the present study is to clarify the functional expression and physiological role in neural progenitor cells (NPCs) of carnitine/organic cation transporter OCTN1/SLC22A4, which accepts the naturally occurring food-derived antioxidant ergothioneine (ERGO) as a substrate in vivo. Real-time PCR analysis revealed that mRNA expression of OCTN1 was much higher than that of other organic cation transporters in mouse cultured cortical NPCs. Immunocytochemical analysis showed colocalization of OCTN1 with the NPC marker nestin in cultured NPCs and mouse embryonic carcinoma P19 cells differentiated into neural progenitor-like cells (P19-NPCs). These cells exhibited time-dependent [3H]ERGO uptake. These results demonstrate that OCTN1 is functionally expressed in murine NPCs. Cultured NPCs and P19-NPCs formed neurospheres from clusters of proliferating cells in a culture time-dependent manner. Exposure of cultured NPCs to ERGO or other antioxidants (edaravone and ascorbic acid) led to a significant decrease in the area of neurospheres with concomitant elimination of intracellular reactive oxygen species. Transfection of P19-NPCs with small interfering RNA for OCTN1 markedly promoted formation of neurospheres with a concomitant decrease of [3H]ERGO uptake. On the other hand, exposure of cultured NPCs to ERGO markedly increased the number of cells immunoreactive for the neuronal marker βIII-tubulin, but decreased the number immunoreactive for the astroglial marker glial fibrillary acidic protein (GFAP), with concomitant up-regulation of neuronal differentiation activator gene Math1. Interestingly, edaravone and ascorbic acid did not affect such differentiation of NPCs, in contrast to the case of proliferation. Knockdown of OCTN1 increased the number of cells immunoreactive for GFAP, but decreased the number immunoreactive for βIII-tubulin, with concomitant down-regulation of Math1 in P19-NPCs. Thus, OCTN1-mediated uptake of ERGO in NPCs inhibits cellular proliferation

  18. Improved Electrochemical Detection of Zinc Ions Using Electrode Modified with Electrochemically Reduced Graphene Oxide

    PubMed Central

    Kudr, Jiri; Richtera, Lukas; Nejdl, Lukas; Xhaxhiu, Kledi; Vitek, Petr; Rutkay-Nedecky, Branislav; Hynek, David; Kopel, Pavel; Adam, Vojtech; Kizek, Rene

    2016-01-01

    Increasing urbanization and industrialization lead to the release of metals into the biosphere, which has become a serious issue for public health. In this paper, the direct electrochemical reduction of zinc ions is studied using electrochemically reduced graphene oxide (ERGO) modified glassy carbon electrode (GCE). The graphene oxide (GO) was fabricated using modified Hummers method and was electrochemically reduced on the surface of GCE by performing cyclic voltammograms from 0 to −1.5 V. The modification was optimized and properties of electrodes were determined using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The determination of Zn(II) was performed using differential pulse voltammetry technique, platinum wire as a counter electrode, and Ag/AgCl/3 M KCl reference electrode. Compared to the bare GCE the modified GCE/ERGO shows three times better electrocatalytic activity towards zinc ions, with an increase of reduction current along with a negative shift of reduction potential. Using GCE/ERGO detection limit 5 ng·mL−1 was obtained. PMID:28787832

  19. Electrochemical determination of 2,4,6-trinitrophenol using a hybrid film composed of a copper-based metal organic framework and electroreduced graphene oxide.

    PubMed

    Wang, Yong; Cao, Wei; Wang, Luyao; Zhuang, Qianfen; Ni, Yongnian

    2018-06-04

    A metal organic framework (MOF) of the type copper(II)-1,3,5-benzenetricarboxylic acid (Cu-BTC) was electrodeposited on electroreduced graphene oxide (ERGO) placed on a glassy carbon electrode (GCE). The modified GCE was used for highly sensitive electrochemical determination of 2,4,6-trinitrophenol (TNP). The fabrication process of the modified electrode was characterized by scanning electron microscopy and electrochemical impedance spectroscopy. Differential pulse voltammetry (DPV) demonstrates that the Cu-BTC/ERGO/GCE gives stronger signals for TNP reduction than Cu-BTC/GCE or ERGO/GCE alone. DPV also shows TNP to exhibit three reduction peaks, the first at a potential of -0.42 V (vs. SCE). This potential was selected because the other three similarly-structured compounds (2-nitrophenol, 4-nitrophenol, 2,4-dinitrophenol) do not give a signal at this potential. Response is linear in the 0.2 to 10 μM TNP concentration range, with a 0.1 μM detection limit (at S/N = 3) and a 15.98 μA∙μM -1 ∙cm -2 sensitivity under optimal conditions. The applicability of the sensor was evaluated by detecting TNP in spiked tap water and lake water samples. Recoveries ranged between 95 and 101%. Graphical abstract Schematic presentation of an electrochemical sensor that was fabricated by electrodeposition of the metal-organic framework (MOF) of copper(II)-1,3,5-benzenetricarboxylic acid (Cu-BTC) onto the surface of electroreduced graphene oxide (ERGO) modified glassy carbon electrode (GCE). It was applied to sensitive and selective detection of 2,4,6-trinitrophenol (TNP).

  20. Applications of invariants in general relativity

    NASA Astrophysics Data System (ADS)

    Pelavas, Nicos

    This thesis explores various kinds of invariants and their use in general relativity. To start, the simplest invariants, those polynomial in the Riemann tensor, are examined and the currently accepted Carminati-Zakhary set is compared to the Carminati-McLenaghan set. A number of algebraic relations linking the two sets are given. The concept of gravitational entropy, as proposed by Penrose, has some physically appealing properties which have motivated attempts to quantify this notion using various invariants. We study this in the context of self-similar spacetimes. A general result is obtained which gives the Lie derivative of any invariant or ratio of invariants along a homothetic trajectory. A direct application of this result shows that the currently used gravitational epoch function fails to satisfy certain criteria. Based on this work, candidates for a gravitational epoch function are proposed that behave accordingly in these models. The instantaneous ergo surface in the Kerr solution is studied and shown to possess conical points at the poles when embedded in three dimensional Euclidean space. These intrinsic singularities had remained undiscovered for a generation. We generalize the Gauss-Bonnet theorem to accommodate these points and use it to compute a topological invariant, the Euler characteristic, for this surface. Interest in solutions admitting a cosmological constant has prompted us to study ergo surfaces in stationary non-asymptotically flat spacetimes. In these cases we show that there is in fact a family of ergo surfaces. By using a kinematic invariant constructed from timelike Killing vectors we try to find a preferred ergo surface. We illustrate to what extent this invariant fails to provide such a measure.

  1. Electrochemically reduced graphene oxide/Poly-Glycine composite modified electrode for sensitive determination of l-dopa.

    PubMed

    Palakollu, Venkata Narayana; Thapliyal, Neeta; Chiwunze, Tirivashe E; Karpoormath, Rajshekhar; Karunanidhi, Sivanandhan; Cherukupalli, Srinivasulu

    2017-08-01

    A facile preparation strategy based on electrochemical technique for the fabrication of glycine (Poly-Gly) and electrochemically reduced graphene oxide (ERGO) composite modified electrode was developed. The morphology of the developed composite (ERGO/Poly-Gly) was investigated using field emission scanning electron microscope (FE-SEM). The composite modified glassy carbon electrode (GCE) was characterized using fourier transform-infrared (FT-IR) spectroscopy, electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The electrochemical characterization results revealed that ERGO/Poly-Gly modified GCE has excellent electrocatalytic activity. Further, it was employed for sensing of l-dopa in pH5.5. Differential pulse voltammetry (DPV) was used for the quantification of l-dopa as well as for the simultaneous resolution of l-dopa and uric acid (UA). The LOD (S/N=3) was found to be 0.15μM at the proposed composite modified electrode. Determination of l-dopa could also be achieved in the presence of potentially interfering substances. The sensor showed high sensitivity and selectivity with appreciable reliability and precision. The proposed sensor was also successfully applied for real sample analysis. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Relativistic Self-similar Equilibria and Non-axisymmetric Neutral Modes

    NASA Astrophysics Data System (ADS)

    Cai, Mike J.; Shu, F. H.

    2002-05-01

    We have constructed semi-analytic axisymmetric scale free solutions to Einstein field equations with perfect fluid matter source. These spacetimes are self-similar under the simultaneous transformation r'= ar and t'=a1-nt. We explored the two dimensional solution space parameterized by the rescaling index n and the isothermal sound speed γ 1/2. The isopycnic surfaces are in general toroids. As the equilibrium configuration rotates faster, an ergo region develops in the form of the exterior of a cone centered about the symmetry axis. The sequence of solution terminates when frame dragging becomes infinite and the ergo cone closes onto the axis. In the extreme flattening limit, we have also searched for non-axisymmetric neutral modes in a self-similar disk. Two separate sets of tracks are discovered in the solution space. One corresponds to the bifurcation points to non-axisymmetric equilibria, which is confined in the non-ergo solutions. The other track signals the onset of instability driven by gravitational radiation. These solutions are formally infinite in extent, and thus can not represent realistic astrophysical systems. However, if these properties do not alter qualitatively when the self-similar configurations are truncated, then these solutions may serve as initial data for dynamic collapse in super massive black hole formation.

  3. Electrochemically Reduced Graphene Oxide on Well-Aligned Titanium Dioxide Nanotube Arrays for Betavoltaic Enhancement.

    PubMed

    Chen, Changsong; Wang, Na; Zhou, Peng; San, Haisheng; Wang, Kaiying; Chen, Xuyuan

    2016-09-21

    We report a novel betavoltaic device with significant conversion efficiency by using electrochemically reduced graphene oxide (ERGO) on TiO2 nanotube arrays (TNTAs) for enhancing the absorption of beta radiation as well as the transportation of carriers. ERGO on TNTAs (G-TNTAs) were prepared by electrochemical anodization and subsequently cyclic voltammetry techniques. A 10 mCi of (63)Ni/Ni source was assembled to G-TNTAs to form the sandwich-type betavoltaic devices (Ni/(63)Ni/G-TNTAs/Ti). By I-V measurements, the optimum betavoltaic device exhibits a significant effective energy conversion efficiency of 26.55% with an open-circuit voltage of 2.38 V and a short-circuit current of 14.69 nAcm(-2). The experimental results indicate that G-TNTAs are a high-potential nanocomposite for developing betavoltaic batteries.

  4. High loading MnO2 nanowires on graphene paper: facile electrochemical synthesis and use as flexible electrode for tracking hydrogen peroxide secretion in live cells.

    PubMed

    Dong, Shuang; Xi, Jiangbo; Wu, Yanan; Liu, Hongwei; Fu, Chaoyang; Liu, Hongfang; Xiao, Fei

    2015-01-01

    Recent progress in flexible and lightweight electrochemical sensor systems requires the development of paper-like electrode materials. Here, we report a facile and green synthesis of a new type of MnO2 nanowires-graphene nanohybrid paper by one-step electrochemical method. This strategy demonstrates a collection of unique features including the effective electrochemical reduction of graphene oxide (GO) paper and the high loading of MnO2 nanowires on electrochemical reduced GO (ERGO) paper. When used as flexible electrode for nonenzymatic detection of hydrogen peroxide (H2O2), MnO2-ERGO paper exhibits high electrocatalytic activity toward the redox of H2O2 as well as excellent stability, selectivity and reproducibility. The amperometric responses are linearly proportional to H2O2 concentration in the range 0.1-45.4 mM, with a detection limit of 10 μM (S/N=3) and detection sensitivity of 59.0 μA cm(-2) mM(-1). These outstanding sensing performances enable the practical application of MnO2-ERGO paper electrode for the real-time tracking H2O2 secretion by live cells macrophages. Therefore, the proposed graphene-based nanohybrid paper electrode with intrinsic flexibility, tailorable shapes and adjustable properties can contribute to the full realization of high-performance flexible electrode material used in point-of-care testing devices and portable instruments for in-vivo clinical diagnostics and on-site environmental monitoring. Copyright © 2014 Elsevier B.V. All rights reserved.

  5. Efficient low-temperature transparent electrocatalytic layers based on graphene oxide nanosheets for dye-sensitized solar cells.

    PubMed

    Seo, Seon Hee; Jeong, Eun Ji; Han, Joong Tark; Kang, Hyon Chol; Cha, Seung I; Lee, Dong Yoon; Lee, Geon-Woong

    2015-05-27

    Electrocatalytic materials with a porous structure have been fabricated on glass substrates, via high-temperature fabrication, for application as alternatives to platinum in dye-sensitized solar cells (DSCs). Efficient, nonporous, nanometer-thick electrocatalytic layers based on graphene oxide (GO) nanosheets were prepared on plastic substrates using electrochemical control at low temperatures of ≤100 °C. Single-layer, oxygen-rich GO nanosheets prepared on indium tin oxide (ITO) substrates were electrochemically deoxygenated in acidic medium within a narrow scan range in order to obtain marginally reduced GO at minimum expense of the oxygen groups. The resulting electrochemically reduced GO (E-RGO) had a high density of residual alcohol groups with high electrocatalytic activity toward the positively charged cobalt-complex redox mediators used in DSCs. The ultrathin, alcohol-rich E-RGO layer on ITO-coated poly(ethylene terephthalate) was successfully applied as a lightweight, low-temperature counter electrode with an extremely high optical transmittance of ∼97.7% at 550 nm. A cobalt(II/III)-mediated DSC employing the highly transparent, alcohol-rich E-RGO electrode exhibited a photovoltaic power conversion efficiency of 5.07%. This is superior to that obtained with conventionally reduced GO using hydrazine (3.94%) and even similar to that obtained with platinum (5.10%). This is the first report of a highly transparent planar electrocatalytic layer based on carbonaceous materials fabricated on ITO plastics for application in DSCs.

  6. Self-similar Relativisitic Disks revisted

    NASA Astrophysics Data System (ADS)

    Cai, M. J.; Shu, F. H.

    2001-05-01

    We revisit the rotating self-similar disk first studied by Lynden-Bell and Pineault and extend it to include pressure. A two-parameter family of solutions is constructed numerically. These disks are parameterized by the constant linear rotation velocity v, and the isothermal sound speed γ 1/2. For sufficiently high velocities, an ergo region develops in the form of the exterior of a cone. For each value of γ , there is a maximum velocity vc above which there is no equilibrium solutions. For this solution the frame dragging is infinite and the ergo cone closes on the rotation axis. The null geodesic equations are also integrated numerically. Due to the infinite extend and mass of the system, all photon trajectories are focused towards the disk. The behavior of equatorial photons orbits is qualitatively the same as that of cold disks.

  7. Achieving direct electrochemistry of glucose oxidase by one step electrochemical reduction of graphene oxide and its use in glucose sensing.

    PubMed

    Shamsipur, Mojtaba; Tabrizi, Mahmoud Amouzadeh

    2014-12-01

    In this paper, the direct electrochemistry of glucose oxidase (GOD) was accomplished at a glassy carbon electrode modified with electrochemically reduced graphene oxide/sodium dodecyl sulfate (GCE/ERGO/SDS). A pair of reversible peaks is exhibited on GCE/ERGO/SDS/GOD by cyclic voltammetry. The peak-to-peak potential separation of immobilized GOD is 28 mV in 0.1 M phosphate buffer solution (pH7.0) with a scan rate of 50 mV/s. The average surface coverage is 2.62×10(-10) mol cm(-2). The resulting biosensor exhibited a good response to glucose with linear range from 1 to 8 mM (R(2)=0.9878), good reproducibility and detection limit of 40.8 μM. The results from the biosensor were similar (±5%) to those obtained from the clinical analyzer. Copyright © 2014 Elsevier B.V. All rights reserved.

  8. Migraine and triggers: Post hoc ergo propter hoc?

    PubMed Central

    Hoffmann, Jan; Recober, Ana

    2013-01-01

    The influence of environmental factors on the clinical manifestation of migraine has been a matter of extensive debate over the past decades. Migraineurs commonly report foods, alcohol, meteorologic or atmospheric changes, exposure to light, sounds, or odors, as factors that trigger or aggravate their migraine attacks. In the same way, physicians frequently follow this belief in their recommendations in how migraineurs may reduce their attack frequency, especially with regard to the consumption of certain food components. Interestingly, despite being such a common belief, most of the clinical studies have shown conflicting results. The aim of the review is to critically analyze clinical and pathophysiological facts that support or refute a correlation between certain environmental stimuli and the occurrence of migraine attacks. Given the substantial discrepancy between patients' reports and objective clinical data, the methodological difficulties of investigating the link between environmental factors and migraine are highlighted. PMID:23996725

  9. On the existence of horizons in spacetimes with vanishing curvature invariants

    NASA Astrophysics Data System (ADS)

    Senovilla, José M. M.

    2003-11-01

    A direct very simple proof that there can be no closed trapped surfaces (ergo no black hole regions) in spacetimes with all curvature scalar invariants vanishing is given. Explicit examples of the recently introduced ``dynamical horizons'' which nevertheless do not enclose any trapped region are presented too.

  10. Chemically-modified graphenes for oxidation of DNA bases: analytical parameters.

    PubMed

    Goh, Madeline Shuhua; Bonanni, Alessandra; Ambrosi, Adriano; Sofer, Zdeněk; Pumera, Martin

    2011-11-21

    We studied the electroanalytical performances of chemically-modified graphenes (CMGs) containing different defect densities and amounts of oxygen-containing groups, namely graphite oxide (GPO), graphene oxide (GO), thermally reduced graphene oxide (TR-GO) and electrochemically reduced graphene oxide (ER-GO) by comparing the sensitivity, selectivity, linearity and repeatability towards the oxidation of DNA bases. We have observed that for differential pulse voltammetric (DPV) detection of adenine and cytosine, all CMGs showed enhanced sensitivity to oxidation, while for guanine and thymine, ER-GO and TR-GO exhibited much improved sensitivity over bare glassy carbon (GC) as well as over GPO and GO. There is also significant selectivity enhancement when using GPO for adenine and TR-GO for thymine. Our results have uncovered that the differences in surface functionalities, structure and defects of various CMGs largely influence their electrochemical behaviour in detecting the oxidation of DNA bases. The findings in this report will provide a useful guide for the future development of label-free electrochemical devices for DNA analysis.

  11. Facile electrodeposition of reduced graphene oxide hydrogels for high-performance supercapacitors

    NASA Astrophysics Data System (ADS)

    Pham, Viet Hung; Gebre, Tesfaye; Dickerson, James H.

    2015-03-01

    We report both a facile, scalable method to prepare reduced graphene oxide hydrogels through the electrodeposition of graphene oxide and its use as an electrode for high-performance supercapacitors. Such systems exhibited specific capacitances of 147 and 223 F g-1 at a current density of 10 A g-1 when using H2SO4 and H2SO4 + hydroquinone redox electrolytes, respectively.We report both a facile, scalable method to prepare reduced graphene oxide hydrogels through the electrodeposition of graphene oxide and its use as an electrode for high-performance supercapacitors. Such systems exhibited specific capacitances of 147 and 223 F g-1 at a current density of 10 A g-1 when using H2SO4 and H2SO4 + hydroquinone redox electrolytes, respectively. Electronic supplementary information (ESI) available: GO synthesis, characterization, fabrication of ERGO supercapacitor and electrochemical measurement, elemental composition, TGA and XRD of GO and ERGO. See DOI: 10.1039/c4nr07508k

  12. Physical Properties of the Double Kerr Solution

    NASA Astrophysics Data System (ADS)

    Herdeiro, Carlos A. R.; Rebelo, Carmen

    We consider two special cases, dubbed counter-rotating and co-rotating of the double-Kerr solution, in four spacetime dimensions. We discuss how various physical properties of the black holes vary as the distance between them varies, namely: the horizon angular velocity and extremality condition, the horizon and ergo-surface geometry.

  13. Let's Get Physical-Or Not

    ERIC Educational Resources Information Center

    Kim, Ann

    2005-01-01

    Necessity is still the mother of invention, and physical processing is a reality for most libraries. Ergo, the inevitable development of Indigo Media and its innovative MediaPrint software, which allows distributors to overlay customized labels, logos, barcodes, and artwork onto retail labels of audiobooks, CDs, VHS tapes, DVDs, and CD-ROMs, on a…

  14. 20171130_Ind Ergo Report_631 DI Water Movement Process.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rivera, Cynthia R.

    Perform an industrial ergonomic assessment to evaluate the new procedures for filling, lifting, and delivering high purity de-ionized water to building 9925. The goal was to improve on the previous method by minimizing/eliminating as much lifting and bending as possible to reduce the potential for overexertion-related injuries.

  15. Antioxidant properties of fruiting bodies, mycelia, and fermented products of the culinary-medicinal king oyster mushroom, Pleurotus eryngii (higher Basidiomycetes), with high ergothioneine content.

    PubMed

    Liang, Chih-Hung; Ho, Kung-Jui; Huang, Ling-Yi; Tsai, Ching-Hsuan; Lin, Shin-Yi; Mau, Jeng-Leun

    2013-01-01

    The culinary-medicinal king oyster mushroom Pleurotus eryngii is known to contain ergothioneine, and its products, including fruiting bodies, mycelia, and solid-state fermented products (adlay and buckwheat), were prepared to study their antioxidant properties. Fruiting bodies, regular and Hi-Ergo mycelia, and fermented products contained 2.05, 1.68, 5.76, 0.79-0.80 mg/g of ergothioneine, respectively. On the basis of the results obtained, P. eryngii products had effective antioxidant activity, reducing power, and scavenging ability on 1,1-diphenyl-2-picrylhydrazyl radicals and chelating ability on ferrous ions. Hi-Ergo mycelia was the most effective in the first 3 antioxidant properties in addition to its ergothioneine content. In addition, fruiting bodies were more effective in all antioxidant properties than regular mycelia. For ethanolic and hot water extracts from mycelia and fruiting bodies, the correlation coefficients between total phenol contents and each antioxidant attribute were 0.483-0.921. Overall, P. eryngii products with high amounts of ergothioneine could be used beneficially as a functional food.

  16. Global structure of five-dimensional fuzzballs

    NASA Astrophysics Data System (ADS)

    Gibbons, G. W.; Warner, N. P.

    2014-01-01

    We describe and study families of BPS microstate geometries, namely, smooth, horizonless asymptotically flat solutions to supergravity. We examine these solutions from the perspective of earlier attempts to find solitonic solutions in gravity and show how the microstate geometries circumvent the earlier ‘no-go’ theorems. In particular, we re-analyze the Smarr formula and show how it must be modified in the presence of non-trivial second homology. This, combined with the supergravity Chern-Simons terms, allows the existence of rich classes of BPS, globally hyperbolic, asymptotically flat, microstate geometries whose spatial topology is the connected sum of N copies of S2 × S2 with a ‘point at infinity’ removed. These solutions also exhibit ‘evanescent ergo-regions,’ that is, the non-space-like Killing vector guaranteed by supersymmetry is time-like everywhere except on time-like hypersurfaces (ergo-surfaces) where the Killing vector becomes null. As a by-product of our work, we are able to resolve the puzzle of why some regular soliton solutions violate the BPS bound: their spacetimes do not admit a spin structure.

  17. On the Nature of Mathematical Thought and Inquiry: A Prelusive Suggestion

    ERIC Educational Resources Information Center

    McLoughlin, M. Padraig M. M.

    2004-01-01

    The author of this paper submits that humans have a natural inquisitiveness; hence, mathematicians (as well as other humans) must be active in learning. Thus, we must commit to conjecture and prove or disprove said conjecture. Ergo, the purpose of the paper is to submit the thesis that learning requires doing; only through inquiry is learning…

  18. Inquiry Based Learning: A Modified Moore Method Approach To Encourage Student Research

    ERIC Educational Resources Information Center

    McLoughlin, M. Padraig M. M.

    2008-01-01

    The author of this paper submits that a mathematics student needs to learn to conjecture and prove or disprove said conjecture. Ergo, the purpose of the paper is to submit the thesis that learning requires doing; only through inquiry is learning achieved, and hence this paper proposes a programme of use of a modified Moore method (MMM) across the…

  19. Symptoms of Psychological Distress and Post-Traumatic Stress Disorder in United States Air Force Drone Operators

    DTIC Science & Technology

    2014-08-01

    items asking participants to report the main sources of their occupational stress , as well as questions addressing demographics and work -related...long work hours and low manning, (b) rotating shift work , (c) balancing domestic roles and responsibilities with their warfighter role, (d) the ergo...concern and for developing strategies to mitigate stressful working conditions. The introductory script informed participants they could withdraw at

  20. An integrated tool to support engineers for WMSDs risk assessment during the assembly line balancing.

    PubMed

    Di Benedetto, Raffaele; Fanti, Michele

    2012-01-01

    This paper wants to present an integrated approach to Line Balancing and Risk Assessment and a Software Tool named ErgoAnalysis that makes it easy to control the whole production process and produces a Risk Index for the actual work tasks in an Assembly Line. Assembly Line Balancing, or simply Line Balancing, is the problem of assigning operations to workstations along an assembly line, in such a way that the assignment be optimal in some sense. Assembly lines are characterized by production constraints and restrictions due to several aspects such as the nature of the product and the flow of orders. To be able to respond effectively to the needs of production, companies need to frequently change the workload and production models. Each manufacturing process might be quite different from another. To optimize very specific operations, assembly line balancing might utilize a number of methods and the Engineer must consider ergonomic constraints, in order to reduce the risk of WMDSs. Risk Assessment may result very expensive because the Engineer must evaluate it at every change. ErgoAnalysis can reduce cost and improve effectiveness in Risk Assessment during the Line Balancing.

  1. Sprayable, Paintable Layer-by-Layer Polyaniline Nanofiber/Graphene Electrodes for Electrochemical Energy Storage

    NASA Astrophysics Data System (ADS)

    Kwon, Se Ra; Jeon, Ju-Won; Lutkenhus, Jodie

    2015-03-01

    Sprayable batteries are growing in interest for applications in structural energy storage and power or flexible power. Spray-assisted layer-by-layer (LbL) assembly, in which complementary species are alternately sprayed onto a surface, is particularly amenable toward this application. Here, we report on the fabrication of composite films containing polyaniline nanofibers (PANI NF) and graphene oxide (GO) sheets fabricated via spray-assisted LbL assembly. The resulting films are electrochemical reduced to yield PANI NF/electrochemically reduced graphene (ERGO) electrodes for use as a cathode in non-aqueous energy storage systems. Through the spray-assisted LbL process, the hybrid electrodes could be fabricated 74 times faster than competing dip-assisted LbL assembly. The resulting electrodes are highly porous (0.72 void fraction), and are comprised of 67 wt% PANI NF and 33 wt% ERGO. The sprayed electrodes showed better rate capability, higher specific power, as well as more stable cycle life than dip-assisted LbL electrodes. It is shown here that the spray-assisted LbL approach is well-suited towards the fabrication of paintable electrodes containing polyaniline nanofibers and electrochemically reduced graphene oxide sheets.

  2. Topcolor Assisted Technicolor

    NASA Astrophysics Data System (ADS)

    Hill, Christopher T.

    We discuss a class of dynamical models in which top condensation occurs at the weak scale, giving rise to the large top quark mass and other phenomena. This typically requires a color embedding, SU(3)C → SU(3)1×SU(3)2, ergo "Topcolor." Topcolor suggests a novel route to technicolor models in which sequential quarks condense under the Topcolor interaction to break electroweak symmetries.

  3. Diagnostic Assessment of Troubleshooting Skill in an Intelligent Tutoring System

    DTIC Science & Technology

    1994-03-01

    the information that can be provided from studying gauges and indicators and conventional test equipment procedures. Experts are particularly adept at...uses the results of the strategy and action evaluator to update the student profile, represented as a network, using the ERGO ( Noetic Systems, 1993...1990). Individualized tutoring using an intelligent fuzzy temporal relational database. International Tournal of Man-Machine Studies . & 409-429. 𔄁. 34

  4. Ferrocene functionalized graphene based electrode for the electro-Fenton oxidation of ciprofloxacin.

    PubMed

    Divyapriya, Govindaraj; Nambi, Indumathi; Senthilnathan, Jaganathan

    2018-05-26

    Ferrocene functionalized graphene based graphite felt electrode was firstly investigated for heterogeneous electro-Fenton oxidation of ciprofloxacin in neutral pH condition. Electrochemical reduction of Ferrocene functionalized graphene oxide (Fc-ErGO) was performed by cyclic voltammetry technique. At neutral pH condition, Fc-ErGO electrode (0.035 min ─1 ) exhibited ∼3 times and ∼9 times higher removal rates in comparison with plane ErGO (0.010 min ─1 ) and plane graphite felt (0.004 min ─1 ) electrodes respectively. The effect of pH and applied potential were studied for the degradation of ciprofloxacin in Fc-ErGO based electrode. Higher removal rate was observed at acidic pH (0.222 min ─1 ), whereas alkaline pH showed lower removal efficiency (0.014 min ─1 ). > 99% removal of ciprofloxacin was achieved with in 15 min and 120 min of reactions period at pH 3.0 and pH 7.0, respectively. H 2 O 2 generation was found to be high in plane ErGO electrode system in all of the pH conditions. Owing to the high redox ability of ferrocene, Fc-ErGO electrode generated high concentration of OH radicals (426 μM pH 3.0; 247 μM pH 7.0; 210 μM pH 9.0) than ErGO and plane graphite felt electrodes; The electrode reusability study was performed to understand the electrode stability. There was no significant change in removal efficiency even after the 5th cycle of reusability study at both acidic and neutral conditions. The possible mechanism of oxidation in Fc-ErGO based electro-Fenton process was also proposed based on the continuous monitoring of H 2 O 2 and OH radicals generated in the system. Copyright © 2018. Published by Elsevier Ltd.

  5. Could Bertrand Russell's barber have bitten his own teeth? A problem of logic and definitions.

    PubMed

    Aitken, Kenneth John

    2014-08-01

    Guiding the positive evolution of behavior is an admirable goal. Wilson et al.'s arguments are based largely on studies of problem correction. The methodology is sound, but not the post hoc ergo procter hoc extrapolation. What is required is evidence that it can proactively generate positive change. The evolution of human behavior to date has been affected by many factors that include unmalleable and unpredicted environmental changes.

  6. Occupational Radiation Protection in Interventional Radiology: A Joint Guideline of the Cardiovascular and Interventional Radiology Society of Europe and the Society of Interventional Radiology

    DTIC Science & Technology

    2010-01-01

    should be provided with properly fitted aprons, both to reduce ergo- nomic hazards and to provide optimal radiation protection [45]. Aprons should be...advised to use eye protection at all times [2, 15]. Leaded eyeglasses are an alternative to ceiling-suspended shields for this purpose. Leaded eye...glasses with large lenses and protective side shields pro- vide more protection than eyeglasses without these features. They help to minimize scatter

  7. Electrochemically reduced graphene-oxide supported bimetallic nanoparticles highly efficient for oxygen reduction reaction with excellent methanol tolerance

    NASA Astrophysics Data System (ADS)

    Yasmin, Sabina; Cho, Sung; Jeon, Seungwon

    2018-03-01

    We report a simple and facile method for the fabrication of bimetallic nanoparticles on electrochemically reduced graphene oxide (ErGO) for electrocatalytic oxygen reduction reaction (ORR) in alkaline media. First, reduced graphene oxide supported palladium and manganese oxide nanoparticle (rGO/Pd-Mn2O3) catalyst was synthesized via a simple chemical method at room temperature; then, it was electrochemically reduced for oxidation reduction reaction (ORR) in alkaline media. The chemical composition and morphological properties of ErGO/Pd-Mn2O3 was characterized by X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS). The TEM images reveals that, nano-sized Pd and Mn2O3 particles were disperse on the ErGO sheet without aggregation. The as-prepared ErGO/Pd-Mn2O3 was employed for ORR in alkaline media which shows higher ORR activity with more positive onset and half-wave potential, respectively. Remarkably, ErGO/Pd-Mn2O3 reduced oxygen via four-electron transfer pathway with negligible amount of intermediate peroxide species (HO2-). Furthermore, the higher stability and excellent methanol tolerance of the ErGO/Pd-Mn2O3 compared to commercial Pt/C (20 wt%) catalyst, indicating its suitability for fuel cells.

  8. Smart Interpretation - Application of Machine Learning in Geological Interpretation of AEM Data

    NASA Astrophysics Data System (ADS)

    Bach, T.; Gulbrandsen, M. L.; Jacobsen, R.; Pallesen, T. M.; Jørgensen, F.; Høyer, A. S.; Hansen, T. M.

    2015-12-01

    When using airborne geophysical measurements in e.g. groundwater mapping, an overwhelming amount of data is collected. Increasingly larger survey areas, denser data collection and limited resources, combines to an increasing problem of building geological models that use all the available data in a manner that is consistent with the geologists knowledge about the geology of the survey area. In the ERGO project, funded by The Danish National Advanced Technology Foundation, we address this problem, by developing new, usable tools, enabling the geologist utilize her geological knowledge directly in the interpretation of the AEM data, and thereby handle the large amount of data, In the project we have developed the mathematical basis for capturing geological expertise in a statistical model. Based on this, we have implemented new algorithms that have been operationalized and embedded in user friendly software. In this software, the machine learning algorithm, Smart Interpretation, enables the geologist to use the system as an assistant in the geological modelling process. As the software 'learns' the geology from the geologist, the system suggest new modelling features in the data. In this presentation we demonstrate the application of the results from the ERGO project, including the proposed modelling workflow utilized on a variety of data examples.

  9. Towards a critical transition theory under different temporal scales and noise strengths

    NASA Astrophysics Data System (ADS)

    Shi, Jifan; Li, Tiejun; Chen, Luonan

    2016-03-01

    The mechanism of critical phenomena or critical transitions has been recently studied from various aspects, in particular considering slow parameter change and small noise. In this article, we systematically classify critical transitions into three types based on temporal scales and noise strengths of dynamical systems. Specifically, the classification is made by comparing three important time scales τλ, τtran, and τergo, where τλ is the time scale of parameter change (e.g., the change of environment), τtran is the time scale when a particle or state transits from a metastable state into another, and τergo is the time scale when the system becomes ergodic. According to the time scales, we classify the critical transition behaviors as three types, i.e., state transition, basin transition, and distribution transition. Moreover, for each type of transition, there are two cases, i.e., single-trajectory transition and multitrajectory ensemble transition, which correspond to the transition of individual behavior and population behavior, respectively. We also define the critical point for each type of critical transition, derive several properties, and further propose the indicators for predicting critical transitions with numerical simulations. In addition, we show that the noise-to-signal ratio is effective to make the classification of critical transitions for real systems.

  10. Graphene oxide electrocatalyst on MnO2 air cathode as an efficient electron pump for enhanced oxygen reduction in alkaline solution

    NASA Astrophysics Data System (ADS)

    Basirun, Wan Jeffrey; Sookhakian, Mehran; Baradaran, Saeid; Endut, Zulkarnain; Mahmoudian, Mohammad Reza; Ebadi, Mehdi; Yousefi, Ramin; Ghadimi, Hanieh; Ahmed, Sohail

    2015-03-01

    Graphene oxide (GO) was deposited on the surface of a MnO2 air cathode by thermal evaporation at 50°C from a GO colloidal suspension. Fourier transformed infrared spectroscopy and field emission scanning electron microscopy confirmed the presence of GO on the MnO2 air cathode (GO-MnO2). Voltammetry and chrono-amperometry showed increased currents for the oxygen reduction reaction (ORR) in 6 M KOH solution for GO-MnO2 compared to the MnO2 cathode. The GO-MnO2 was used as an air cathode in an alkaline tin-air cell and produced a maximum power density of 13 mW cm-2, in contrast to MnO2, which produced a maximum power density of 9.2 mW cm-2. The electrochemical impedance spectroscopy results suggest that the chemical step for the ORR is the rate determining step, as proposed earlier by different researchers. It is suggested that the presence of GO and electrochemically reduced graphene oxide (ERGO) on the MnO2 surface are responsible for the increased rate of this step, whereby GO and ERGO accelerate the process of electron donation to the MnO2 and to adsorbed oxygen atoms.

  11. LBNP/ergometer effects on female cardiovascular and muscle deconditioning in 15d head-down bed rest

    NASA Astrophysics Data System (ADS)

    Wang, Lin-Jie

    2012-07-01

    Female has already been an important part of astronaut corps but gender characteristics in weightlessness and countermeasure effects still not clearly elucidated. In this study the LBNP/Ergometer effects on female cardiovascular deconditioning and muscle atrophy in 15d head-down bed rest were explored. 22 female university students were recruited as volunteers that participated in the 15d head-down bed rest. They were divided into control group (Con,n=8), LBNP exercise group (LBNP,n=7) and LBNP combined with ergometer exercise group (LBNP+Ergo, n=7). Grade negative pressures of -10,-20,-30,-40mmHg 20 or 55min were used in LBNP exercise. In ergometer exercises the subjects must maintain 60-80% VO2peak of pre-bed rest at pedal speed of about 70cycle/min for 15min and the entire exercise duration was 30min. LBNP were performed at 6th,8th,10th,12th,and 13th day and Ergometer were operated at 4th,5th,7th,9th,11th day during bed rest. Before and after bed rest, cardiovascular tilt test were performed to evaluate orthostatic intolerance, supine cycle ergometer were used to test the cardiopulmonary function, MRI tests were operated to examine the volume variations of leg muscle groups and isokinetic test were given to test the muscle strength and endurance of knee. 40% of female subjects did not pass the tilt table test after bed rest and exercises made no difference. Compared with pre-BR, VO2max and VO2max /body weight, VO2/HRmax, maximal power and duration significantly decreased in CON group and LBNP group. For the ERGO+LBNP group, there were no visible different in the parameters of cardiopulmonary function except that maximal power and duration decreased. Muscle maximal voluntary contraction and muscle (quadriceps, rectus femoris, gastrocnemius and soleus) volume decreasing in non-predominant leg was larger in Con group than in LBNP+Ergo group. It is suggested that LBNP combined with ergometer in some degrees can counteract the cardiovascular and muscle deconditioning

  12. Cogito ergo video: Task-relevant information is involuntarily boosted into awareness.

    PubMed

    Gayet, Surya; Brascamp, Jan W; Van der Stigchel, Stefan; Paffen, Chris L E

    2015-01-01

    Only part of the visual information that impinges on our retinae reaches visual awareness. In a series of three experiments, we investigated how the task relevance of incoming visual information affects its access to visual awareness. On each trial, participants were instructed to memorize one of two presented hues, drawn from different color categories (e.g., red and green), for later recall. During the retention interval, participants were presented with a differently colored grating in each eye such as to elicit binocular rivalry. A grating matched either the task-relevant (memorized) color category or the task-irrelevant (nonmemorized) color category. We found that the rivalrous stimulus that matched the task-relevant color category tended to dominate awareness over the rivalrous stimulus that matched the task-irrelevant color category. This effect of task relevance persisted when participants reported the orientation of the rivalrous stimuli, even though in this case color information was completely irrelevant for the task of reporting perceptual dominance during rivalry. When participants memorized the shape of a colored stimulus, however, its color category did not affect predominance of rivalrous stimuli during retention. Taken together, these results indicate that the selection of task-relevant information is under volitional control but that visual input that matches this information is boosted into awareness irrespective of whether this is useful for the observer.

  13. Scalarized hairy black holes

    NASA Astrophysics Data System (ADS)

    Kleihaus, Burkhard; Kunz, Jutta; Yazadjiev, Stoytcho

    2015-05-01

    In the presence of a complex scalar field scalar-tensor theory allows for scalarized rotating hairy black holes. We exhibit the domain of existence for these scalarized black holes, which is bounded by scalarized rotating boson stars and hairy black holes of General Relativity. We discuss the global properties of these solutions. Like their counterparts in general relativity, their angular momentum may exceed the Kerr bound, and their ergosurfaces may consist of a sphere and a ring, i.e., form an ergo-Saturn.

  14. Spinning boson stars and Kerr black holes with scalar hair: The effect of self-interactions

    NASA Astrophysics Data System (ADS)

    Herdeiro, Carlos A. R.; Radu, Eugen; Rúnarsson, Helgi F.

    2016-05-01

    Self-interacting boson stars (BSs) have been shown to alleviate the astrophysically low maximal mass of their nonself-interacting counterparts. We report some physical features of spinning self-interacting BSs, namely their compactness, the occurrence of ergo-regions and the scalar field profiles, for a sample of values of the coupling parameter. The results agree with the general picture that these BSs are comparatively less compact than the nonself-interacting ones. We also briefly discuss the effect of scalar self-interactions on the properties of Kerr black holes with scalar hair.

  15. IRONSIDES: DNS With No Single Packet Denial of Service or Remote Code Execution Vulnerabilities

    DTIC Science & Technology

    2012-02-27

    Caching DNSSEC TSIG 1Pv6 Wildcard S fi.. In terface y y Y * N __ mo e ---- o •• vare y y y N NN y m progress y y y NY N Web, Y command...Proceedings of the 2007 IEEE Aerospace Conference. [6) C. Heitmeyer, M . Archer, E. Leonard and J. Mclean, "Applying formal methods to a certifiably secure...2003). [1 5] DNSSEC-The DNS Security Extensions, http:// http://www.dnssec.net/ (16] S . Conchon, E. Contcjean and J. Kanig, "Ergo : A theorem prover

  16. Searching for extraterrestrial artifacts.

    NASA Astrophysics Data System (ADS)

    Freitas, R. A.

    The Fermi Paradox, attributed to a famous question from physicist Enrico Fermi in 1943, asks: if there are intelligent beings elsewhere then, in time, they must achieve the technology of nuclear power and space flight and would explore and colonize the Galaxy. Thus, they should have been able to travel to Earth, but we see no evidence of such visitations. Ergo, they cannot exist. The author, of the Xenology Research Institute in California, discusses this viewpoint and suggests how and where we might be able to detect an alien presence in the Solar System.

  17. Stationary black holes and attractor mechanism

    NASA Astrophysics Data System (ADS)

    Astefanesei, Dumitru; Yavartanoo, Hossein

    2008-05-01

    We investigate the symmetries of the near horizon geometry of extremal stationary black hole in four-dimensional Einstein gravity coupled to Abelian gauge fields and neutral scalars. Careful consideration of the equations of motion and the boundary conditions at the horizon imply that the near horizon geometry has SO(2,1)×U(1) isometry. This compliments the rotating attractors proposal of hep-th/0606244 that had assumed the presence of this isometry. The extremal solutions are classified into two families differentiated by the presence or absence of an ergo-region. We also comment on the attractor mechanism of both branches.

  18. Experimental Concepts for Testing Seismic Hazard Models

    NASA Astrophysics Data System (ADS)

    Marzocchi, W.; Jordan, T. H.

    2015-12-01

    Seismic hazard analysis is the primary interface through which useful information about earthquake rupture and wave propagation is delivered to society. To account for the randomness (aleatory variability) and limited knowledge (epistemic uncertainty) of these natural processes, seismologists must formulate and test hazard models using the concepts of probability. In this presentation, we will address the scientific objections that have been raised over the years against probabilistic seismic hazard analysis (PSHA). Owing to the paucity of observations, we must rely on expert opinion to quantify the epistemic uncertainties of PSHA models (e.g., in the weighting of individual models from logic-tree ensembles of plausible models). The main theoretical issue is a frequentist critique: subjectivity is immeasurable; ergo, PSHA models cannot be objectively tested against data; ergo, they are fundamentally unscientific. We have argued (PNAS, 111, 11973-11978) that the Bayesian subjectivity required for casting epistemic uncertainties can be bridged with the frequentist objectivity needed for pure significance testing through "experimental concepts." An experimental concept specifies collections of data, observed and not yet observed, that are judged to be exchangeable (i.e., with a joint distribution independent of the data ordering) when conditioned on a set of explanatory variables. We illustrate, through concrete examples, experimental concepts useful in the testing of PSHA models for ontological errors in the presence of aleatory variability and epistemic uncertainty. In particular, we describe experimental concepts that lead to exchangeable binary sequences that are statistically independent but not identically distributed, showing how the Bayesian concept of exchangeability generalizes the frequentist concept of experimental repeatability. We also address the issue of testing PSHA models using spatially correlated data.

  19. Electrochemically reduced graphene oxide-modified screen-printed carbon electrodes for a simple and highly sensitive electrochemical detection of synthetic colorants in beverages.

    PubMed

    Jampasa, Sakda; Siangproh, Weena; Duangmal, Kiattisak; Chailapakul, Orawon

    2016-11-01

    A simple and highly sensitive electrochemical sensor based on an electrochemically reduced graphene oxide-modified screen-printed carbon electrode (ERGO-SPCE) for the simultaneous determination of sunset yellow (SY) and tartrazine (TZ) was proposed. An ERGO film was coated onto the electrode surface using a cyclic voltammetric method and then characterized by scanning electron microscopy (SEM). In 0.1M phosphate buffer at a pH of 6, the two oxidation peaks of SY and TZ appeared separately at 0.41 and 0.70V, respectively. Surprisingly, the electrochemical response remarkably increased approximately 90- and 20-fold for SY and TZ, respectively, using the modified electrode in comparison to the unmodified electrode. The calibration curves exhibited linear ranges from 0.01 to 20.0µM for SY and from 0.02 to 20.0µM for TZ. The limits of detection were found to be 0.50 and 4.50nM (at S/N=3) for SY and TZ, respectively. Furthermore, this detection platform provided very high selectivity for the measurement of both colorants. This electrochemical sensor was successfully applied to determine the amount of SY and TZ in commercial beverages. Comparison of the results obtained from this proposed method to those obtained by an in-house standard technique proved that this developed method has good agreement in terms of accuracy for practical applications. This sensor offers an inexpensive, rapid and sensitive determination. The proposed system is therefore suitable for routine analysis and should be an alternative method for the analysis of food colorants. Copyright © 2016 Elsevier B.V. All rights reserved.

  20. Clinical, functional and radiological results of Achilles tenorraphy surgically treated with mini-open technique.

    PubMed

    Vadalà, A; De Carli, A; Vulpiani, M C; Iorio, R; Vetrano, M; Scapellato, S; Suarez, T; Di Salvo, F; Ferretti, A

    2012-12-01

    The aim of this paper was to report clinical, functional and radiological results of 80 patients surgically treated with a combined mini-open and percutaneous surgical repair as proposed by Kakiuchi. All patients were evaluated with a physical examination, evaluation scales, a functional test (Ergo-jump Bosco System), and an ultrasonographic exam along with Power Doppler Ultrasonography (PDU) (S/S). At a mean follow-up of 58 months no cases of rerupture were detected. VISA-A evaluation scale showed an excellent score in 63 patients (78.75%), a good score in 14 patients (17.5%), a fair score in two patients (2.5%), and a poor score in one patient (1.25%). Hannover scale showed an excellent score in 63 patients (78.75%), and a good score in 17 patients (21.25%). Ergo-Jump evaluation showed a 2.07% mean deficit of the affected limb at the Squatting Jump test, a 3.26% mean deficit at the Counter Movement Jump test, and a 0.0062% mean improvement at the Repetitive Jump test. Ultrasonographic exam showed in all cases a satisfactory recovery of the integrity of the operated tendon. The mean AP and LL widths showed a significant increase of 7.13±2.97 mm (+56.1%) and of 4.01±2.36 mm (+43.81%) respectively. According to the modified Öhberg score scale, PDU exam showed a grade +1 in 16 patients (20%) and a grade +2 in seven cases (8.7%). The absence of rerupture cases, the satisfactory functional and ultrasonographic results of the patients included in this study cause us to consider this technique as reliable and effective even in young high-demand patients.

  1. Sandwich holospeckle interferometry for three-dimensional displacement determination

    NASA Astrophysics Data System (ADS)

    Wu, X. P.; Chiang, F. P.

    1986-06-01

    A sandwich holospecklegram (SH) technique with flexible sensitivity is presented for performing both in-plane and out-of-plane displacement measurements of objects. An object beam from a laser is directed onto a part-mirror onto which the object image is also directed and produces interference in the beam. The beam is redirected to fall, with a reference beam, onto photographic and speckle plates with their emulsion sides against one another, ergo, the sandwich. Reconstruction methods are delineated and illustrated with an SH of a crack in an aluminum alloy plate undergoing a three-point bending test. The crack is noted to occur in a region only 2 mm across.

  2. Noise properties of an optical frequency comb from a SESAM-mode-locked 1.5-μm solid-state laser stabilized to the 10-13 level

    NASA Astrophysics Data System (ADS)

    Schilt, S.; Dolgovskiy, V.; Bucalovic, N.; Schori, C.; Stumpf, M. C.; Di Domenico, G.; Pekarek, S.; Oehler, A. E. H.; Südmeyer, T.; Keller, U.; Thomann, P.

    2012-11-01

    We present a detailed investigation of the noise properties of an optical frequency comb generated from a femtosecond diode-pumped solid-state laser operating in the 1.5-μm spectral region. The stabilization of the passively mode-locked Er:Yb:glass laser oscillator, referred to as ERGO, is achieved using pump power modulation for the control of the carrier envelope offset (CEO) frequency and by adjusting the laser cavity length for the control of the repetition rate. The stability and the noise of the ERGO comb are characterized in free-running and in phase-locked operation by measuring the noise properties of the CEO, of the repetition rate, and of a comb line at 1558 nm. The comb line is analyzed from the heterodyne beat signal with a cavity-stabilized ultra-narrow-linewidth laser using a frequency discriminator. Two different schemes to stabilize the comb to a radio-frequency (RF) reference are compared. The comb properties (phase noise, frequency stability) are limited in both cases by the RF oscillator used to stabilize the repetition rate, while the contribution of the CEO is negligible at all Fourier frequencies, as a consequence of the low-noise characteristics of the CEO-beat. A linewidth of ≈150 kHz and a fractional frequency instability of 4.2×10-13 at 1 s are obtained for an optical comb line at 1558 nm. Improved performance is obtained by stabilizing the comb to an optical reference, which is a cavity-stabilized ultra-narrow linewidth laser at 1558 nm. The fractional frequency stability of 8×10-14 at 1 s, measured in preliminary experiments, is limited by the reference oscillator used in the frequency comparison.

  3. 'Toxgnostics': an unmet need in cancer medicine.

    PubMed

    Church, David; Kerr, Rachel; Domingo, Enric; Rosmarin, Dan; Palles, Claire; Maskell, Kevin; Tomlinson, Ian; Kerr, David

    2014-06-01

    If we were to summarize the rationale that underpins medical oncology in a Latin aphorism, it might be 'veneno ergo sum'; that is, I poison, therefore I am. The burden of chemotherapy-associated toxicity is well recognized, but we have relatively few tools that increase the precision of anticancer drug prescribing. We propose a shift in emphasis from the focussed study of polymorphisms in drug metabolic pathways in small sets of patients to broader agnostic analyses to systematically correlate germline genetic variants with adverse events in large, well-defined cancer populations. Thus, we propose the new science of 'toxgnostics' (that is, the systematic, agnostic study of genetic predictors of toxicity from anticancer therapy).

  4. Does your model weigh the same as a Duck?

    NASA Astrophysics Data System (ADS)

    Jain, Ajay N.; Cleves, Ann E.

    2012-01-01

    Computer-aided drug design is a mature field by some measures, and it has produced notable successes that underpin the study of interactions between small molecules and living systems. However, unlike a truly mature field, fallacies of logic lie at the heart of the arguments in support of major lines of research on methodology and validation thereof. Two particularly pernicious ones are cum hoc ergo propter hoc (with this, therefore because of this) and confirmation bias (seeking evidence that is confirmatory of the hypothesis at hand). These fallacies will be discussed in the context of off-target predictive modeling, QSAR, molecular similarity computations, and docking. Examples will be shown that avoid these problems.

  5. A10 – UAS Control Station Ergo-nomics Considerations : Tasks CS-6 through CS-8

    DOT National Transportation Integrated Search

    2017-08-01

    The overall objective of the control station tasks within Project A-10 is to provide the Federal Aviation Administration (FAA) with information on an ergonomic design of unmanned aircraft system (UAS) control stations which will allow safe piloting o...

  6. A study on the optics of copper indium gallium (di)selenide (CIGS) solar cells with ultra-thin absorber layers.

    PubMed

    Xu, Man; Wachters, Arthur J H; van Deelen, Joop; Mourad, Maurice C D; Buskens, Pascal J P

    2014-03-10

    We present a systematic study of the effect of variation of the zinc oxide (ZnO) and copper indium gallium (di)selenide (CIGS) layer thickness on the absorption characteristics of CIGS solar cells using a simulation program based on finite element method (FEM). We show that the absorption in the CIGS layer does not decrease monotonically with its layer thickness due to interference effects. Ergo, high precision is required in the CIGS production process, especially when using ultra-thin absorber layers, to accurately realize the required thickness of the ZnO, cadmium sulfide (CdS) and CIGS layer. We show that patterning the ZnO window layer can strongly suppress these interference effects allowing a higher tolerance in the production process.

  7. Superresonance phenomenon from acoustic black holes in neo-Newtonian theory

    NASA Astrophysics Data System (ADS)

    Salako, I. G.; Jawad, Abdul

    2016-03-01

    We explore the possibility of the acoustic analogue of a super-radiance like phenomenon, i.e. the amplification of a sound wave by reflection from the ergo-region of a rotating acoustic black hole in the fluid draining bathtub model in the presence of the pressure to be amplified or reduced in agreement with the value of the parameter (γ = 1 + knρ0n-1 c2 ). We remark that the interval of frequencies depend upon the neo-Newtonian parameter γ (Ω¯H = 2 1+γΩH) and becomes narrow in this work. As a consequence, the tuning of the neo-Newtonian parameter (γ = 1 + knρ0n-1 c2 ) changes the rate of loss of the acoustic black hole mass.

  8. Black String and Velocity Frame Dragging

    NASA Astrophysics Data System (ADS)

    Lee, Jungjai; Kim, Hyeong-Chan

    We investigate velocity frame dragging with the boosted Schwarzschild black string solution and the boosted Kaluza-Klein bubble solution, in which a translational symmetry along the boosted z-coordinate is implemented. The velocity frame dragging effect can be nullified by the motion of an observer using the boost symmetry along the z-coordinate if it is not compact. However, in spacetime with the compact z-coordinate, we show that the effect cannot be removed since the compactification breaks the global Lorentz boost symmetry. As a result, the comoving velocity depends on r and the momentum parameter along the z-coordinate becomes an observer independent characteristic quantity of the black string and bubble solutions. The dragging induces a spherical ergo-region around the black string.

  9. A Kaluza-Klein subtractor

    NASA Astrophysics Data System (ADS)

    Jana, Sanjib; Krishnan, Chethan

    2014-05-01

    We generalize the results of arXiv:1212.1875 and arXiv:1212.6919 on attraction basins and their boundaries to the case of a specific class of rotating black holes, namely the ergo-free branch of extremal black holes in Kaluza-Klein theory. We find that exact solutions that span the attraction basin can be found even in the rotating case by appealing to certain symmetries of the equations of motion. They are characterized by two asymptotic parameters that generalize those of the non-rotating case, and the boundaries of the basin are spinning versions of the (generalized) subtractor geometry. We also give examples to illustrate that the shape of the attraction basin can drastically change depending on the theory.

  10. A three-dimensional interpenetrating electrode of reduced graphene oxide for selective detection of dopamine.

    PubMed

    Yu, Xiaowen; Sheng, Kaixuan; Shi, Gaoquan

    2014-09-21

    Electrochemical detection of dopamine plays an important role in medical diagnosis. In this paper, we report a three-dimensional (3D) interpenetrating graphene electrode fabricated by electrochemical reduction of graphene oxide for selective detection of dopamine. This electrochemically reduced graphene oxide (ErGO) electrode was used directly without further functionalization or blending with other functional materials. This electrode can efficiently lower the oxidation potential of ascorbic acid; thus, it is able to selectively detect dopamine in the presence of ascorbic acid and uric acid. The ErGO-based biosensor exhibited a linear response towards dopamine in the concentration range of 0.1-10 μM with a low detection limit of 0.1 μM. Furthermore, this electrode has good reproducibility and environmental stability, and can be used to analyse real samples.

  11. Supporting the design of office layout meeting ergonomics requirements.

    PubMed

    Margaritis, Spyros; Marmaras, Nicolas

    2007-11-01

    This paper proposes a method and an information technology tool aiming to support the ergonomics layout design of individual workstations in a given space (building). The proposed method shares common ideas with previous generic methods for office layout. However, it goes a step forward and focuses on the cognitive tasks which have to be carried out by the designer or the design team trying to alleviate them. This is achieved in two ways: (i) by decomposing the layout design problem to six main stages, during which only a limited number of variables and requirements are considered and (ii) by converting the ergonomics requirements to functional design guidelines. The information technology tool (ErgoOffice 0.1) automates certain phases of the layout design process, and supports the design team either by its editing and graphical facilities or by providing adequate memory support.

  12. A review on interleukins: The key manipulators in rheumatoid arthritis.

    PubMed

    Sharma, Jatin; Bhar, Sutonuka; Devi, C Subathra

    2017-09-01

    Rheumatoid arthritis (RA) is a chronic inflammatory autoimmune disease associated with weakening of bones and joint pain. It primarily involves autoimmunity, matrix destruction, osteoclastogenesis, inflammation, and angiogenesis. Numerous cellular and humoral components of the immune system are involved in the etiology of diseases; however, the cardinal part is played by the inter-cellular signaling messengers called cytokines. Interleukins is a vaguely defined sub-class of cytokines that are abundantly found in the RA patients. The multifariousness and diversity in the function of the interleukins make them very likely to be associated with the pathogenesis in multiple ways. Nonetheless, the variety in opinions of researchers globally has led to contentious inferences. Ergo, in this review we have amalgamated the views of researchers from the past two decades till date to provide a comprehensive report about the role of interleukins in rheumatoid arthritis.

  13. Scattering of Cosmic Strings by Black Holes:. Loop Formation

    NASA Astrophysics Data System (ADS)

    Dubath, Florian; Sakellariadou, Mairi; Viallet, Claude Michel

    We study the deformation of a long cosmic string by a nearby rotating black hole. We examine whether the deformation of a cosmic string, induced by the gravitational field of a Kerr black hole, may lead to the formation of a string loop. The segment of the string which enters the ergo-sphere of a rotating black hole gets deformed and, if it is sufficiently twisted, it can self-intersect, chopping off a loop. We find that the formation of a loop, via such a mechanism, is a rare event. It will only arise in a small region of the collision phase space, which depends on the string velocity, the impact parameter and the black hole angular momentum. We conclude that, generically, a long cosmic string is simply scattered, or captured, by a nearby rotating black hole.

  14. Tadeusz Banachiewicz in Tartu (1915 to 1918)

    NASA Astrophysics Data System (ADS)

    Flin, P.; Panko, E.

    Tadeusz Banachiewicz (1882--1954) was an outstanding Polish astro\\-nomer, mathematician and geodesist. He was a professor at the Jagiellonian University in Cracow and director of the Astronomical Observatory (1919--1954), and had a strong influence on Polish astronomy. His achievements led to honorary degrees at universities, fellowships in academies of sciences, and the prestige of high positions in international organizations, such as the International Astronomical Union and the Baltic Geodetic Commission. He is known from both his theoretical and observational studies, his famous motto being: ``observo ergo sum''. Here we recall three years of his activity in Tartu, where Tadeusz Banachiewicz made the most important steps in his career. He arrived at Yuryev in October of 1915, employed as a young assistant. In March 1918 he became the extraordinary professor and director of the Astronomical Observatory.

  15. Bespoke analogue space-times: meta-material mimics

    NASA Astrophysics Data System (ADS)

    Schuster, Sebastian; Visser, Matt

    2018-06-01

    Modern meta-materials allow one to construct electromagnetic media with almost arbitrary bespoke permittivity, permeability, and magneto-electric tensors. If (and only if) the permittivity, permeability, and magneto-electric tensors satisfy certain stringent compatibility conditions, can the meta-material be fully described (at the wave optics level) in terms of an effective Lorentzian metric—an analogue spacetime. We shall consider some of the standard black-hole spacetimes of primary interest in general relativity, in various coordinate systems, and determine the equivalent meta-material susceptibility tensors in a laboratory setting. In static black hole spacetimes (Schwarzschild and the like) certain eigenvalues of the susceptibility tensors will be seen to diverge on the horizon. In stationary black hole spacetimes (Kerr and the like) certain eigenvalues of the susceptibility tensors will be seen to diverge on the ergo-surface.

  16. Linac-based extracranial radiosurgery with Elekta volumetric modulated arc therapy and an anatomy-based treatment planning system: Feasibility and initial experience

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cilla, Savino, E-mail: savinocilla@gmail.com; Deodato, Francesco; Macchia, Gabriella

    We reported our initial experience in using Elekta volumetric modulated arc therapy (VMAT) and an anatomy-based treatment planning system (TPS) for single high-dose radiosurgery (SRS-VMAT) of liver metastases. This study included a cohort of 12 patients treated with a 26-Gy single fraction. Single-arc VMAT plans were generated with Ergo++ TPS. The prescription isodose surface (IDS) was selected to fulfill the 2 following criteria: 95% of planning target volume (PTV) reached 100% of the prescription dose and 99% of PTV reached a minimum of 90% of prescription dose. A 1-mm multileaf collimator (MLC) block margin was added around the PTV. Formore » a comparison of dose distributions with literature data, several conformity indexes (conformity index [CI], conformation number [CN], and gradient index [GI]) were calculated. Treatment efficiency and pretreatment dosimetric verification were assessed. Early clinical data were also reported. Our results reported that target and organ-at-risk objectives were met for all patients. Mean and maximum doses to PTVs were on average 112.9% and 121.5% of prescribed dose, respectively. A very high degree of dose conformity was obtained, with CI, CN, and GI average values equal to 1.29, 0.80, and 3.63, respectively. The beam-on-time was on average 9.3 minutes, i.e., 0.36 min/Gy. The mean number of monitor units was 3162, i.e., 121.6 MU/Gy. Pretreatment verification (3%-3 mm) showed an optimal agreement with calculated values; mean γ value was 0.27 and 98.2% of measured points resulted with γ < 1. With a median follow-up of 16 months complete response was observed in 12/14 (86%) lesions; partial response was observed in 2/14 (14%) lesions. No radiation-induced liver disease (RILD) was observed in any patients as well no duodenal ulceration or esophagitis or gastric hemorrhage. In conclusion, this analysis demonstrated the feasibility and the appropriateness of high-dose single-fraction SRS-VMAT in liver metastases performed with

  17. Cross-Scale Observational Signatures of Magnetic Reconnection

    NASA Technical Reports Server (NTRS)

    Savage, Sabrina; Malaspina, David

    2014-01-01

    Magnetic reconnection is a significant mechanism for energy release across many astrophysical applications. In the solar atmosphere, reconnection is considered a primary contributor of flare evolution and coronal heating. Directly observing reconnection occurring in the solar atmosphere, however, is not trivial considering that the scale size of the diffusion region is magnitudes smaller than the observational capabilities of current instrumentation, and coronal magnetic field measurements are not currently sufficient to capture the process. Meanwhile, reconnection occurring in the Earth's magnetosphere transfers energy from the solar wind through a comparable process, although on vastly different scales. Magnetospheric measurements are made in situ rather than remotely; ergo, comparison of observations between the two regimes allows for potentially significant insight into reconnection as a stochastic and possibly turbulent process. We will present a set of observations from long-duration solar events and compare them to in situ measurements from the magnetosphere.

  18. Social preferences influence the short-term exchange of social grooming among male bonobos.

    PubMed

    Surbeck, Martin; Hohmann, Gottfried

    2015-03-01

    The emotional mediation hypothesis proposes a mediating role of social bonds in the exchange of services. This model predicts that the form of short-term exchange of services depends on the relationship between the individuals involved. Here, we test this prediction in the exchange of grooming among males in a wild bonobo community for which close relatedness could be excluded. As bonobo males hardly engage in food sharing or agonistic support, grooming is mainly exchanged for grooming. While overall grooming, both given and received, correlates across dyads and within sessions, the form of grooming exchange within a given session differs according to dyadic association preferences. Individuals with a higher tendency to associate, ergo more familiar individuals, exhibit larger time differences and reduced reciprocation in consecutive grooming bouts than less familiar individuals. These results support the idea that emotional components are involved in the exchange of services between unrelated individuals.

  19. Intrinsic Josephson junction behaviour of the low Tc superconductor (LaSe) 1.14(NbSe 2)

    NASA Astrophysics Data System (ADS)

    Kačmarčík, J.; Szabó, P.; Samuely, P.; Rodrigo, J. G.; Suderow, H.; Vieira, S.; Lafond, A.; Meerschaut, A.

    2008-04-01

    Interlayer magnetotransport measurements on the highly anisotropic (LaSe)1.14(NbSe2) superconductor with Tc ∼ 1.2 K have indicated that this layered compound represents a model system of intrinsic Josephson junctions [P. Szabó et al., Phys. Rev. Lett. 86 (2001) 5990]. Scanning tunneling microscopy at room temperature and tunneling spectroscopy measurements at very low temperatures are presented in this work. STM imaging has revealed the presence of two types of surfaces which can be attributed to the appearance of LaSe or NbSe2 layers on the surface. The use of STM tip made of superconducting lead enabled a precise measurement of the temperature dependence of the superconducting energy gap Δ(T) on the NbSe2 layer. Δ(T) obtained from the surface sensitive STS data support the scenario obtained from our previous interlayer - ergo bulk sensitive magnetotransport measurements.

  20. Cross-scale Observational Signatures of Magnetic Reconnection

    NASA Astrophysics Data System (ADS)

    Savage, S. L.; Malaspina, D.

    2014-12-01

    Magnetic reconnection is a significant mechanism for energy release across many astrophysical applications. In the solar atmosphere, reconnection is considered a primary contributor of flare evolution and coronal heating. Directly observing reconnection occurring in the solar atmosphere, however, is not trivial considering that the scale size of the diffusion region is magnitudes smaller than the observational capabilities of current instrumentation, and coronal magnetic field measurements are not currently sufficient to capture the process. Meanwhile, reconnection occurring in the Earth's magnetosphere transfers energy from the solar wind through a comparable process, although on vastly different scales. Magnetospheric measurements are made in situ rather than remotely; ergo, comparison of observations between the two regimes allows for potentially significant insight into reconnection as a stochastic and possibly turbulent process. We will present a set of observations from long-duration solar events and compare them to in situ measurements from the magnetosphere.

  1. A glimpse into the proteome of phototrophic bacterium Rhodobacter capsulatus.

    PubMed

    Onder, Ozlem; Aygun-Sunar, Semra; Selamoglu, Nur; Daldal, Fevzi

    2010-01-01

    A first glimpse into the proteome of Rhodobacter capsulatus revealed more than 450 (with over 210 cytoplasmic and 185 extracytoplasmic known as well as 55 unknown) proteins that are identified with high degree of confidence using nLC-MS/MS analyses. The accumulated data provide a solid platform for ongoing efforts to establish the proteome of this species and the cellular locations of its constituents. They also indicate that at least 40 of the identified proteins, which were annotated in genome databases as unknown hypothetical proteins, correspond to predicted translation products that are indeed present in cells under the growth conditions used in this work. In addition, matching the identification labels of the proteins reported between the two available R. capsulatus genome databases (ERGO-light with RRCxxxxx and NT05 with NT05RCxxxx numbers) indicated that 11 such proteins are listed only in the latter database.

  2. The genome sequence of the facultative intracellular pathogen Brucella melitensis.

    PubMed

    DelVecchio, Vito G; Kapatral, Vinayak; Redkar, Rajendra J; Patra, Guy; Mujer, Cesar; Los, Tamara; Ivanova, Natalia; Anderson, Iain; Bhattacharyya, Anamitra; Lykidis, Athanasios; Reznik, Gary; Jablonski, Lynn; Larsen, Niels; D'Souza, Mark; Bernal, Axel; Mazur, Mikhail; Goltsman, Eugene; Selkov, Eugene; Elzer, Philip H; Hagius, Sue; O'Callaghan, David; Letesson, Jean-Jacques; Haselkorn, Robert; Kyrpides, Nikos; Overbeek, Ross

    2002-01-08

    Brucella melitensis is a facultative intracellular bacterial pathogen that causes abortion in goats and sheep and Malta fever in humans. The genome of B. melitensis strain 16M was sequenced and found to contain 3,294,935 bp distributed over two circular chromosomes of 2,117,144 bp and 1,177,787 bp encoding 3,197 ORFs. By using the bioinformatics suite ERGO, 2,487 (78%) ORFs were assigned functions. The origins of replication of the two chromosomes are similar to those of other alpha-proteobacteria. Housekeeping genes, including those involved in DNA replication, transcription, translation, core metabolism, and cell wall biosynthesis, are distributed on both chromosomes. Type I, II, and III secretion systems are absent, but genes encoding sec-dependent, sec-independent, and flagella-specific type III, type IV, and type V secretion systems as well as adhesins, invasins, and hemolysins were identified. Several features of the B. melitensis genome are similar to those of the symbiotic Sinorhizobium meliloti.

  3. The genome sequence of the facultative intracellular pathogen Brucella melitensis

    PubMed Central

    DelVecchio, Vito G.; Kapatral, Vinayak; Redkar, Rajendra J.; Patra, Guy; Mujer, Cesar; Los, Tamara; Ivanova, Natalia; Anderson, Iain; Bhattacharyya, Anamitra; Lykidis, Athanasios; Reznik, Gary; Jablonski, Lynn; Larsen, Niels; D'Souza, Mark; Bernal, Axel; Mazur, Mikhail; Goltsman, Eugene; Selkov, Eugene; Elzer, Philip H.; Hagius, Sue; O'Callaghan, David; Letesson, Jean-Jacques; Haselkorn, Robert; Kyrpides, Nikos; Overbeek, Ross

    2002-01-01

    Brucella melitensis is a facultative intracellular bacterial pathogen that causes abortion in goats and sheep and Malta fever in humans. The genome of B. melitensis strain 16M was sequenced and found to contain 3,294,935 bp distributed over two circular chromosomes of 2,117,144 bp and 1,177,787 bp encoding 3,197 ORFs. By using the bioinformatics suite ERGO, 2,487 (78%) ORFs were assigned functions. The origins of replication of the two chromosomes are similar to those of other α-proteobacteria. Housekeeping genes, including those involved in DNA replication, transcription, translation, core metabolism, and cell wall biosynthesis, are distributed on both chromosomes. Type I, II, and III secretion systems are absent, but genes encoding sec-dependent, sec-independent, and flagella-specific type III, type IV, and type V secretion systems as well as adhesins, invasins, and hemolysins were identified. Several features of the B. melitensis genome are similar to those of the symbiotic Sinorhizobium meliloti. PMID:11756688

  4. 1.55 µm InAs/GaAs Quantum Dots and High Repetition Rate Quantum Dot SESAM Mode-locked Laser

    NASA Astrophysics Data System (ADS)

    Zhang, Z. Y.; Oehler, A. E. H.; Resan, B.; Kurmulis, S.; Zhou, K. J.; Wang, Q.; Mangold, M.; Süedmeyer, T.; Keller, U.; Weingarten, K. J.; Hogg, R. A.

    2012-06-01

    High pulse repetition rate (>=10 GHz) diode-pumped solid-state lasers, modelocked using semiconductor saturable absorber mirrors (SESAMs) are emerging as an enabling technology for high data rate coherent communication systems owing to their low noise and pulse-to-pulse optical phase-coherence. Quantum dot (QD) based SESAMs offer potential advantages to such laser systems in terms of reduced saturation fluence, broader bandwidth, and wavelength flexibility. Here, we describe the development of an epitaxial process for the realization of high optical quality 1.55 µm In(Ga)As QDs on GaAs substrates, their incorporation into a SESAM, and the realization of the first 10 GHz repetition rate QD-SESAM modelocked laser at 1.55 µm, exhibiting ~2 ps pulse width from an Er-doped glass oscillator (ERGO). With a high areal dot density and strong light emission, this QD structure is a very promising candidate for many other applications, such as laser diodes, optical amplifiers, non-linear and photonic crystal based devices.

  5. Stationary metrics and optical Zermelo-Randers-Finsler geometry

    NASA Astrophysics Data System (ADS)

    Gibbons, G. W.; Herdeiro, C. A. R.; Warnick, C. M.; Werner, M. C.

    2009-02-01

    We consider a triality between the Zermelo navigation problem, the geodesic flow on a Finslerian geometry of Randers type, and spacetimes in one dimension higher admitting a timelike conformal Killing vector field. From the latter viewpoint, the data of the Zermelo problem are encoded in a (conformally) Painlevé-Gullstrand form of the spacetime metric, whereas the data of the Randers problem are encoded in a stationary generalization of the usual optical metric. We discuss how the spacetime viewpoint gives a simple and physical perspective on various issues, including how Finsler geometries with constant flag curvature always map to conformally flat spacetimes and that the Finsler condition maps to either a causality condition or it breaks down at an ergo surface in the spacetime picture. The gauge equivalence in this network of relations is considered as well as the connection to analogue models and the viewpoint of magnetic flows. We provide a variety of examples.

  6. Magnetization reversal in exchange biased Co/CoO probed with anisotropic magnetoresistance

    NASA Astrophysics Data System (ADS)

    Gredig, Thomas; Krivorotov, Ilya N.; Dahlberg, E. Dan

    2002-05-01

    The magnetization reversal in exchange coupled polycrystalline Co/CoO bilayers has been investigated as a function of CoO thickness using anisotropic magnetoresistance as a probe. The anisotropic magnetoresistance (AMR) was measured during the magnetization reversal and it was used to determine the orientation of the magnetization. For thin CoO layers large training effects were present; ergo the first hysteresis loop after field cooling was not the same as the second. The magnitude of the observed training was found to decrease with increasing CoO thickness. In the samples where substantial training was observed, the first magnetization reversal was dominated by nucleation of reversed domains. For the reversal from the antiparallel state back to the parallel direction, the AMR is consistent with a rotation process. In thicker CoO films where the training was less, the asymmetry was drastically reduced. A simple model that couples the antiferromagnetic grains to the ferromagnetic layer simulates qualitatively the observed magnetoresistance.

  7. A Scheme for Targeting Optical SETI Observations

    NASA Astrophysics Data System (ADS)

    Shostak, Seth

    2004-06-01

    In optical SETI (OSETI) experiments, it is generally assumed that signals will be deliberate, narrowly targeted beacons sent by extraterrestrial societies to large numbers of candidate star systems. If this is so, then it may be unrealistic to expect a high duty cycle for the received signal. Ergo, an advantage accrues to any OSETI scheme that realistically suggests where and when to search. In this paper, we elaborate a proposal (Castellano, Doyle, &McIntosh 2000) for selecting regions of sky for intensive optical SETI monitoring based on characteristics of our solar system that would be visible at great distance. This can enormously lessen the amount of sky that needs to be searched. In addition, this is an attractive approach for the transmitting society because it both increases the chances of reception and provides a large reduction in energy required. With good astrometric information, the transmitter need be no more powerful than an automobile tail light.

  8. Electrochemical Evaluation of trans-Resveratrol Levels in Red Wine Based on the Interaction between Resveratrol and Graphene.

    PubMed

    Liu, Lantao; Zhou, Yanli; Kang, Yiyu; Huang, Haihong; Li, Congming; Xu, Maotian; Ye, Baoxian

    2017-01-01

    trans -Resveratrol is often considered as one of the quality standards of red wine, and the development of a sensitive and reliable method for monitoring the trans -resveratrol levels in red wine is an urgent requirement for the quality control. Here, a novel voltammetric approach was described for probing trans -resveratrol using a graphene-modified glassy carbon (GC) electrode. The proposed electrode was prepared by one-step electrodeposition of reduced graphene oxide (ERGO) at a GC electrode. Compared with the bare GC electrode, the introduced graphene film on the electrode surface dramatically improved the sensitivity of the sensor response due to the π - π interaction between the graphene and trans -resveratrol. The developed sensor exhibited low detection limit of 0.2  μ M with wide linear range of 0.8-32  μ M and high stability. For the analysis of trans -resveratrol in red wine, the high anti-interference ability and the good recoveries indicated the great potential for practical applications.

  9. Electrochemical Evaluation of trans-Resveratrol Levels in Red Wine Based on the Interaction between Resveratrol and Graphene

    PubMed Central

    Liu, Lantao; Kang, Yiyu; Huang, Haihong; Li, Congming; Ye, Baoxian

    2017-01-01

    trans-Resveratrol is often considered as one of the quality standards of red wine, and the development of a sensitive and reliable method for monitoring the trans-resveratrol levels in red wine is an urgent requirement for the quality control. Here, a novel voltammetric approach was described for probing trans-resveratrol using a graphene-modified glassy carbon (GC) electrode. The proposed electrode was prepared by one-step electrodeposition of reduced graphene oxide (ERGO) at a GC electrode. Compared with the bare GC electrode, the introduced graphene film on the electrode surface dramatically improved the sensitivity of the sensor response due to the π-π interaction between the graphene and trans-resveratrol. The developed sensor exhibited low detection limit of 0.2 μM with wide linear range of 0.8–32 μM and high stability. For the analysis of trans-resveratrol in red wine, the high anti-interference ability and the good recoveries indicated the great potential for practical applications. PMID:28819581

  10. Evaluating the Surface Topography of Pyrolytic Carbon Finger Prostheses through Measurement of Various Roughness Parameters

    PubMed Central

    Naylor, Andrew; Talwalkar, Sumedh C.; Trail, Ian A.; Joyce, Thomas J.

    2016-01-01

    The articulating surfaces of four different sizes of unused pyrolytic carbon proximal interphalangeal prostheses (PIP) were evaluated though measuring several topographical parameters using a white light interferometer: average roughness (Sa); root mean-square roughness (Sq); skewness (Ssk); and kurtosis (Sku). The radii of the articulating surfaces were measured using a coordinate measuring machine, and were found to be: 2.5, 3.3, 4.2 and 4.7 mm for proximal, and 4.0, 5.1, 5.6 and 6.3 mm for medial components. ANOVA was used to assess the relationship between the component radii and each roughness parameter. Sa, Sq and Ssk correlated negatively with radius (p = 0.001, 0.001, 0.023), whilst Sku correlated positively with radius (p = 0.03). Ergo, the surfaces with the largest radii possessed the better topographical characteristics: low roughness, negative skewness, high kurtosis. Conversely, the surfaces with the smallest radii had poorer topographical characteristics. PMID:27089375

  11. Development of ergonomics audits for bagging, haul truck and maintenance and repair operations in mining.

    PubMed

    Dempsey, Patrick G; Pollard, Jonisha; Porter, William L; Mayton, Alan; Heberger, John R; Gallagher, Sean; Reardon, Leanna; Drury, Colin G

    2017-12-01

    The development and testing of ergonomics and safety audits for small and bulk bag filling, haul truck and maintenance and repair operations in coal preparation and mineral processing plants found at surface mine sites is described. The content for the audits was derived from diverse sources of information on ergonomics and safety deficiencies including: analysis of injury, illness and fatality data and reports; task analysis; empirical laboratory studies of particular tasks; field studies and observations at mine sites; and maintenance records. These diverse sources of information were utilised to establish construct validity of the modular audits that were developed for use by mine safety personnel. User and interrater reliability testing was carried out prior to finalising the audits. The audits can be implemented using downloadable paper versions or with a free mobile NIOSH-developed Android application called ErgoMine. Practitioner Summary: The methodology used to develop ergonomics audits for three types of mining operations is described. Various sources of audit content are compared and contrasted to serve as a guide for developing ergonomics audits for other occupational contexts.

  12. Reduced Graphene Oxides: Influence of the Reduction Method on the Electrocatalytic Effect towards Nucleic Acid Oxidation

    PubMed Central

    Báez, Daniela F.; Pardo, Helena; Laborda, Ignacio; Marco, José F.; Yáñez, Claudia; Bollo, Soledad

    2017-01-01

    For the first time a critical analysis of the influence that four different graphene oxide reduction methods have on the electrochemical properties of the resulting reduced graphene oxides (RGOs) is reported. Starting from the same graphene oxide, chemical (CRGO), hydrothermal (hTRGO), electrochemical (ERGO), and thermal (TRGO) reduced graphene oxide were produced. The materials were fully characterized and the topography and electroactivity of the resulting glassy carbon modified electrodes were also evaluated. An oligonucleotide molecule was used as a model of DNA electrochemical biosensing. The results allow for the conclusion that TRGO produced the RGOs with the best electrochemical performance for oligonucleotide electroanalysis. A clear shift in the guanine oxidation peak potential to lower values (~0.100 V) and an almost two-fold increase in the current intensity were observed compared with the other RGOs. The electrocatalytic effect has a multifactorial explanation because the TRGO was the material that presented a higher polydispersity and lower sheet size, thus exposing a larger quantity of defects to the electrode surface, which produces larger physical and electrochemical areas. PMID:28677654

  13. ISS Propulsion Module Crew Systems Interface Analysis in the Intelligent Synthesis Environment

    NASA Technical Reports Server (NTRS)

    Chen, Di-Wen

    1999-01-01

    ERGO, a human modeling software for ergonomic assessment and task analysis, was used for the crew systems interface analysis of the International Space Station (ISS) Propulsion Module (PM). The objective of analysis was to alleviate passageway size concerns. Three basic passageway configuration concepts: (1) 45" clear passageway without centerline offset (2) 50" clear passageway, 12" centerline offset, (3) 50" clear passageway, no centerline offset, and were reviewed. 95 percentile male and female models which were provided by the software performed crew system analysis from an anthropometric point of view. Four scenarios in which the crew floats in microgravity through a 50" no-offset passageway as they carry a 16" x 20" x 30" avionics box were simulated in the 10-weeks of intensive study. From the results of the analysis, concept (3) was the preferred option. A full scale, three-dimensional virtual model of the ISS Propulsion Module was created to experience the sense of the Intelligent Synthesis Environment and to evaluate the usability and applicability of the software.

  14. Solving a discrete model of the lac operon using Z3

    NASA Astrophysics Data System (ADS)

    Gutierrez, Natalia A.

    2014-05-01

    A discrete model for the Lcac Operon is solved using the SMT-solver Z3. Traditionally the Lac Operon is formulated in a continuous math model. This model is a system of ordinary differential equations. Here, it was considerated as a discrete model, based on a Boolean red. The biological problem of Lac Operon is enunciated as a problem of Boolean satisfiability, and it is solved using an STM-solver named Z3. Z3 is a powerful solver that allows understanding the basic dynamic of the Lac Operon in an easier and more efficient way. The multi-stability of the Lac Operon can be easily computed with Z3. The code that solves the Boolean red can be written in Python language or SMT-Lib language. Both languages were used in local version of the program as online version of Z3. For future investigations it is proposed to solve the Boolean red of Lac Operon using others SMT-solvers as cvc4, alt-ergo, mathsat and yices.

  15. Preparation and characterization of AuNPs/CNTs-ErGO electrochemical sensors for highly sensitive detection of hydrazine.

    PubMed

    Zhao, Zhenting; Sun, Yongjiao; Li, Pengwei; Zhang, Wendong; Lian, Kun; Hu, Jie; Chen, Yong

    2016-09-01

    A highly sensitive electrochemical sensor of hydrazine has been fabricated by Au nanoparticles (AuNPs) coating of carbon nanotubes-electrochemical reduced graphene oxide composite film (CNTs-ErGO) on glassy carbon electrode (GCE). Cyclic voltammetry and potential amperometry have been used to investigate the electrochemical properties of the fabricated sensors for hydrazine detection. The performances of the sensors were optimized by varying the CNTs to ErGO ratio and the quantity of Au nanoparticles. The results show that under optimal conditions, a sensitivity of 9.73μAμM(-1)cm(-2), a short response time of 3s, and a low detection limit of 0.065μM could be achieved with a linear concentration response range from 0.3μM to 319μM. The enhanced electrochemical performances could be attributed to the synergistic effect between AuNPs and CNTs-ErGO film and the outstanding catalytic effect of the Au nanoparticles. Finally, the sensor was successfully used to analyse the tap water, showing high potential for practical applications. Copyright © 2016 Elsevier B.V. All rights reserved.

  16. Process yield improvements with process control terminal for varian serial ion implanters

    NASA Astrophysics Data System (ADS)

    Higashi, Harry; Soni, Ameeta; Martinez, Larry; Week, Ken

    Implant processes in a modern wafer production fab are extremely complex. There can be several types of misprocessing, i.e. wrong dose or species, double implants and missed implants. Process Control Terminals (PCT) for Varian 350Ds installed at Intel fabs were found to substantially reduce the number of misprocessing steps. This paper describes those misprocessing steps and their subsequent reduction with use of PCTs. Reliable and simple process control with serial process ion implanters has been in increasing demand. A well designed process control terminal greatly increases device yield by monitoring all pertinent implanter functions and enabling process engineering personnel to set up process recipes for simple and accurate system operation. By programming user-selectable interlocks, implant errors are reduced and those that occur are logged for further analysis and prevention. A process control terminal should also be compatible with office personal computers for greater flexibility in system use and data analysis. The impact from the capability of a process control terminal is increased productivity, ergo higher device yield.

  17. Environmental Review Guide for Operations (ERGO) - A Compliance Assessment Manual for Use at All USACE Civil-Funded Projects and Facilities

    DTIC Science & Technology

    1994-03-01

    other Pickling liquor and other corrosive alkalies corrosive acids Lime wastewater Spent acid Lime and water Spent mixed acid Spent caustic Spent ...acid Spent caustic Spent sulfuric acid Potential Consequences: heat generation; violent reaction. 4 - 161 Appendix 4-6 (continued) Group 2-A Group 2-B1...topical bleach (STB) Ordnance, ammunition, explosives & residues Battery acid & caustics (in unserviceable batteries) Some pharmaceuticals Petroleum, oil

  18. Post Hoc Ergo Propter Hoc? Using Causation Diagrams to Empower Sixth-Form Students in Their Historical Thinking about Cause and Effect

    ERIC Educational Resources Information Center

    Alcoe, Alex

    2015-01-01

    Alex Alcoe was concerned that mastery of certain keywords and question formulae at GCSE perhaps obscured fundamental gaps in his students' understanding of the nature of causation. These gaps were revealed when he invited Year 12 students to make explicit, by annotating a diagram, their understanding of the relationship between particular causal…

  19. RTL validation methodology on high complexity wireless microcontroller using OVM technique for fast time to market

    NASA Astrophysics Data System (ADS)

    Zhafirah Muhammad, Nurul; Harun, A.; Hambali, N. A. M. A.; Murad, S. A. Z.; Mohyar, S. N.; Isa, M. N.; Jambek, AB

    2017-11-01

    Increased demand in internet of thing (IOT) application based has inadvertently forced the move towards higher complexity of integrated circuit supporting SoC. Such spontaneous increased in complexity poses unequivocal complicated validation strategies. Hence, the complexity allows researchers to come out with various exceptional methodologies in order to overcome this problem. This in essence brings about the discovery of dynamic verification, formal verification and hybrid techniques. In reserve, it is very important to discover bugs at infancy of verification process in (SoC) in order to reduce time consuming and fast time to market for the system. Ergo, in this paper we are focusing on the methodology of verification that can be done at Register Transfer Level of SoC based on the AMBA bus design. On top of that, the discovery of others verification method called Open Verification Methodology (OVM) brings out an easier way in RTL validation methodology neither as the replacement for the traditional method yet as an effort for fast time to market for the system. Thus, the method called OVM is proposed in this paper as the verification method for larger design to avert the disclosure of the bottleneck in validation platform.

  20. Participatory ergonomics among female cashiers from a department store.

    PubMed

    Cristancho, María Yanire León

    2012-01-01

    The objective of this paper was to control ergonomic risks among female cashiers working in a department store belonging to the retail market. This study was conducted between May and November 2010. Participatory ergonomics was applied through knowing and understanding how the company works, establishing the work team (Ergo group), training the team in ergonomics-related topics, and making decisions and interventions. The sample was composed of 71 participants--mostly female cashiers--, and all of them have a musculoskeletal compromise, declaring pain or discomfort mainly in the neck, lower back, right wrist and shoulders. Among others, following problems were found: postural overload, repetitive work, manual load handling, mental fatigue, environmental discomfort, variable work schedules, extended working days, and absence of breaks. In the intervention, the main implemented changes were the redesign of workstation, complete change of chairs and keyboards, and the implementation of a rotation system, as well breaks for compensatory exercises. After that, an evident improvement of found problems was observed, therefore it can be concluded that participatory ergonomics is an attractive methodology, appropriate and efficient for solving and controlling ergonomic risks and problems.

  1. The Vasa Homolog RDE-12 engages target mRNA and multiple argonaute proteins to promote RNAi in C. elegans.

    PubMed

    Shirayama, Masaki; Stanney, William; Gu, Weifeng; Seth, Meetu; Mello, Craig C

    2014-04-14

    Argonaute (AGO) proteins are key nuclease effectors of RNAi. Although purified AGOs can mediate a single round of target RNA cleavage in vitro, accessory factors are required for small interfering RNA (siRNA) loading and to achieve multiple-target turnover. To identify AGO cofactors, we immunoprecipitated the C. elegans AGO WAGO-1, which engages amplified small RNAs during RNAi. These studies identified a robust association between WAGO-1 and a conserved Vasa ATPase-related protein RDE-12. rde-12 mutants are deficient in RNAi, including viral suppression, and fail to produce amplified secondary siRNAs and certain endogenous siRNAs (endo-siRNAs). RDE-12 colocalizes with WAGO-1 in germline P granules and in cytoplasmic and perinuclear foci in somatic cells. These findings and our genetic studies suggest that RDE-12 is first recruited to target mRNA by upstream AGOs (RDE-1 and ERGO-1), where it promotes small RNA amplification and/or WAGO-1 loading. Downstream of these events, RDE-12 forms an RNase-resistant (target mRNA-independent) complex with WAGO-1 and may thus have additional functions in target mRNA surveillance and silencing. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. Enhanced photocatalytic performance of ZnO nanostructures by electrochemical hybridization with graphene oxide

    NASA Astrophysics Data System (ADS)

    Pruna, A.; Wu, Z.; Zapien, J. A.; Li, Y. Y.; Ruotolo, A.

    2018-05-01

    Synthesis of zinc oxide (ZnO) nanostructures is reported by electrochemical deposition from an aqueous electrolyte in presence of graphene oxide (GO) with varying oxidation degree. The properties of hybrids were investigated by scanning electron microscopy, X-ray diffraction, Raman, Fourier-Transform Infrared and X-ray photoelectron spectroscopy techniques and photocatalytic measurements. The results indicated the electrodeposition of ZnO in presence of GO with increased oxygen content led to marked differences in the morphology while Raman measurements indicated an increased defect level both in the ZnO and the electrochemically reduced GO (ErGO) within the hybrids. The decrease in C/O atomic ratio of GO (from 0.79 to 0.71) employed for the electrodeposition of ZnO resulted in an increase in photocatalytic efficiency for methylene blue degradation under UV irradiation from 4-folds to 10-folds with respect to non-hybridized ZnO. The observed synergetic effect of cathodic deposition potential and oxygen content in GO towards improving the photocatalytic activity of immobilized ZnO is expected to contribute to further development of more effective deposition approaches for the preparation of high performance hybrid nanostructures.

  3. The effects of aerobic exercise training on psychosocial aspects of men with type 2 diabetes mellitus.

    PubMed

    Sardar, Mohammad Ali; Boghrabadi, Vahdat; Sohrabi, Mehdi; Aminzadeh, Reza; Jalalian, Mehrdad

    2014-01-20

    This study was conducted to examine the effects of aerobic exercise training on psychosocial aspects (mental health, the aspects of physical symptoms, anxiety and insomnia, social functioning, and depression) in patients with type 2 diabetes mellitus. 53 men who had type 2 diabetes mellitus for a mean duration of the disease for 3±5 years were selected purposely and classified randomly into experimental (27 patients) and a control group (26 patients). Patients in the experimental group did aerobic exercise training three times a week for eight weeks. The exercise included an aerobic activity for 45 to 60 minutes during which the patients' heart rates were maintained at 60-70 percent of heart rate reserve on ergo meter bikes. The eight-week aerobic exercise training had significant effects on mental health (p = 0.002), subscales of physical symptoms (p = 0.006), and anxiety and insomnia (p = 0.001). It had no significant effects on subscales related to disorder of social functioning (p = 0.117) and depression (p = 0.657). Aerobic exercise training can be considered as an appropriate program for improving the health of the patients with type 2 diabetes mellitus, and it also can improve their mental health.

  4. Organic photochromics for spatial light modulation

    NASA Astrophysics Data System (ADS)

    Kirkby, C. J. G.; Bennion, I.

    1986-02-01

    The feasibility of using fulgide derivatives (FD), a class of thermally stable, fatigue-free photochromic materials (PM), as optically addressed spatial light modulators (SLIM) is analyzed. Photochromism is the property of a material that changes from one physicochemical state to another due to the impingement of light. The PMs are low-resolution but exhibit no granularity as photographic films do, therefore permitting the use of PMs as data or image recording media with direct-read-after-write capability. It is known that the properties of the FDs (of dimethyl succinic anhydride), i.e., the fatigue, thermal stability and absorption band location, can be tailored by control of the location of two of the oxygen links at two locations on the molecule. Manipulating the absorption spectra also allows manipulation of the refractive index, ergo the SLIM capability of the FDs. Molecular substitutions have proven effective for adjustments of the wavelength sensitivities of the FDs. Film thicknesses of 3-10 microns have been shown capable of supporting a practical resolution limit of 100-200 line pairs/mm, a 30 dB dynamic range, a Fourier plane SNR of 50, and an image recycle time of 40 msec.

  5. A new mechanism for relativistic particle acceleration via wave-particle interaction

    NASA Astrophysics Data System (ADS)

    Lapenta, Giovanni; Markidis, Stefano; Marocchino, Alberto

    2006-10-01

    Often in laboratory, space and astrophysical plasma, high energy populations are observed. Two puzzling factors still defy our understanding. First, such populations of high energy particles produce power law distributions that are not only ubiquitous but also persistent in time. Such persistence is in direct contradiction to the H theorem that states the ineluctable transition of physical systems towards thermodynamic equilibrium, and ergo Maxwellian distributions. Second, such high energy populations are efficiently produced, much more efficiently than processes that we know can produce. A classic example of such a situation is cosmic rays where power alws extend up to tremendolus energy ranges. In the present work, we identify a new mechanism for particle acceleration via wave-particle interaction. The mechanism is peculiar to special relativity and has no classical equivalent. That explains why it is not observed in most simulation studies of plasma processes, based on classical physics. The mechanism is likely to be active in systems undergoing streaming instabilities and in particular shocked systems. The new mechanism can produce energy increases vastly superior to previously known mechanisms (such as Fermi acceleration) and can hold the promise of explaining at least some of the observed power laws.

  6. Insights into electrode/electrolyte interfacial processes and the effect of nanostructured cobalt oxides loading on graphene-based hybrids by scanning electrochemical microscopy

    NASA Astrophysics Data System (ADS)

    Gupta, Sanju; Carrizosa, Sara B.

    2016-12-01

    Nanostructured cobalt oxide polymorphs (CoO and Co3O4) deposited via electrodeposition allowed optimal loading on supercapacitive graphene nanosheets producing a set of graphene-based hybrids namely, CoO/GO, CoO/ErGO, Co3O4/GO, Co3O4/rGO, and Co3O4/ErGO, as pseudocapacitive electrochemical electrodes. We gained fundamental insights into the complex physicochemical interfacial processes at electrode surfaces and electrode/electrolyte (or solid/liquid) interfaces by scanning electrochemical microscopy operating in the feedback probe approach and imaging modes while monitoring and mapping the redox probe (re)activity behavior. We determined the various experimental descriptors including diffusion coefficient, electron transfer rate, and electroactive site distribution on electrodes. We emphasize the interplay of (1) heterogeneous basal and edge plane active sites, (2) graphene surface functional moieties (conducting/semiconducting), and (3) crystalline spinel cobalt oxides (semiconducting/insulating) coated graphene, reinforcing the available electron density of states in the vicinity of the Fermi level contributing to higher electroactivity, faster interfacial diffusion, and shorter distances for electron transfer, facilitated through molecular and chemical bridges obtained by electrodeposition as compared with the physical deposition.

  7. Ergosurfaces for Kerr black holes with scalar hair

    NASA Astrophysics Data System (ADS)

    Herdeiro, Carlos; Radu, Eugen

    2014-06-01

    We have recently reported the existence of Kerr black holes with scalar hair in General Relativity minimally coupled to a massive, complex scalar field [C. Herdeiro and E. Radu, Phys. Rev. Lett. 112, 221101 (2014)]. These solutions interpolate between boson stars and Kerr black holes. The latter have a well-known topologically S2 ergosurface (ergosphere) whereas the former develop a S1×S1 ergosurface (ergotorus) in a region of parameter space. We show that hairy black holes always have an ergoregion, and that this region is delimited by either an ergosphere or an ergo-Saturn—i.e. a S2⊕(S1×S1) ergosurface. In the phase space of solutions, the ergotorus can either appear disconnected from the ergosphere or pinch off from it. We provide a heuristic argument, based on a measure of the size of the ergoregion, that superradiant instabilities—which are likely to be present—are weaker for hairy black holes than for Kerr black holes with the same global charges. We observe that Saturn-like, and even more remarkable, ergosurfaces should also arise for other rotating "hairy" black holes.

  8. Optoelectronics of inverted type-I CdS/CdSe core/crown quantum ring

    NASA Astrophysics Data System (ADS)

    Bose, Sumanta; Fan, Weijun; Zhang, Dao Hua

    2017-10-01

    Inverted type-I heterostructure core/crown quantum rings (QRs) are quantum-efficient luminophores, whose spectral characteristics are highly tunable. Here, we study the optoelectronic properties of type-I core/crown CdS/CdSe QRs in the zincblende phase—over contrasting lateral size and crown width. For this, we inspect their strain profiles, transition energies, transition matrix elements, spatial charge densities, electronic bandstructures, band-mixing probabilities, optical gain spectra, maximum optical gains, and differential optical gains. Our framework uses an effective-mass envelope function theory based on the 8-band k ṡ p method employing the valence force field model for calculating the atomic strain distributions. The gain calculations are based on the density-matrix equation and take into consideration the excitonic effects with intraband scattering. Variations in the QR lateral size and relative widths of core and crown (ergo the composition) affect their energy levels, band-mixing probabilities, optical transition matrix elements, emission wavelengths/intensities, etc. The optical gain of QRs is also strongly dimension and composition dependent with further dependency on the injection carrier density causing the band-filling effect. They also affect the maximum and differential gain at varying dimensions and compositions.

  9. Historical time-recessive recombinant nucleotidal gene transfer

    NASA Astrophysics Data System (ADS)

    Norton, Michael A.

    2013-10-01

    Whether conscious of it or not, physicist Tim Berners-Lee basically applied principle of a nuclear chain reaction to electron transport, a remarkable outcome being the world wide web. On a less dense exponential than the nucleus, but still by out of control design (1999), the flow of electrons with high symmetry (hypertext) brought about astonishing new insights to the field. No one in the author's sphere of influence, including the author, ever learned or taught that such chain reactions have a time-recessive trajectory, such that key significant moments in the new science had impact not only the world at present, but on scale overlapping with ancestors. Dr. Chuck Darwin learned man indeed did arise in Africa (brown toastmasters); author suggests his creed ``survival of the fittest'' in post-20th century hindsight, for man initialized nuclear energy in Eurasia (white toastmasters), and nearly brought the world to collapse by dropping nuclear weapons on humans in Asia (yellow toastmasters), be best updated ``survival of the most communicative.'' If true, this informs that the measure of the appended science's power is as equally as important as the measure of its speed, ergo, there really is no energy crisis.

  10. Possibilities of the ErgoScope high fidelity work simulator in skill assessment, skill development and vocational aptitude tests of physically disabled persons.

    PubMed

    Izsó, Lajos; Székely, Ildikó; Dános, László

    2015-01-01

    The aim of this paper - based on the extensive experiences of the authors gained by using one particular work simulator - is to present some promising possibilities of the application of this (and any other similar) work simulator in the field of skill assessment, skill development and vocational aptitude tests of physically disabled persons. During skill assessment and development, as parts of the therapy, the focus is on the disabled functions. During vocational aptitude tests, however, the focus is already on the functions that remained intact and therefore can be the basis of returning to work. Some factual examples are provided to realize the proposed possibilities in practice.

  11. The Ontology of Clinical Research (OCRe): An Informatics Foundation for the Science of Clinical Research

    PubMed Central

    Sim, Ida; Tu, Samson W.; Carini, Simona; Lehmann, Harold P.; Pollock, Brad H.; Peleg, Mor; Wittkowski, Knut M.

    2013-01-01

    To date, the scientific process for generating, interpreting, and applying knowledge has received less informatics attention than operational processes for conducting clinical studies. The activities of these scientific processes — the science of clinical research — are centered on the study protocol, which is the abstract representation of the scientific design of a clinical study. The Ontology of Clinical Research (OCRe) is an OWL 2 model of the entities and relationships of study design protocols for the purpose of computationally supporting the design and analysis of human studies. OCRe’s modeling is independent of any specific study design or clinical domain. It includes a study design typology and a specialized module called ERGO Annotation for capturing the meaning of eligibility criteria. In this paper, we describe the key informatics use cases of each phase of a study’s scientific lifecycle, present OCRe and the principles behind its modeling, and describe applications of OCRe and associated technologies to a range of clinical research use cases. OCRe captures the central semantics that underlies the scientific processes of clinical research and can serve as an informatics foundation for supporting the entire range of knowledge activities that constitute the science of clinical research. PMID:24239612

  12. Microbial reduction of graphene oxide by Escherichia coli: a green chemistry approach.

    PubMed

    Gurunathan, Sangiliyandi; Han, Jae Woong; Eppakayala, Vasuki; Kim, Jin-Hoi

    2013-02-01

    Graphene and graphene related materials are an important area of research in recent years due to their unique properties. The extensive industrial application of graphene and related compounds has led researchers to devise novel and simple methods for the synthesis of high quality graphene. In this paper, we developed an environment friendly, cost effective, simple method and green approaches for the reduction of graphene oxide (GO) using Escherichia coli biomass. In biological method, we can avoid use of toxic and environmentally harmful reducing agents commonly used in the chemical reduction of GO to obtain graphene. The biomass of E. coli reduces exfoliated GO to graphene at 37°C in an aqueous medium. The E. coli reduced graphene oxide (ERGO) was characterized with UV-visible absorption spectroscopy, particle analyzer, high resolution X-ray diffractometer, scanning electron microscopy and Raman spectroscopy. Besides the reduction potential, the biomass could also play an important role as stabilizing agent, in which synthesized graphene exhibited good stability in water. This method can open up the new avenue for preparing graphene in cost effective and large scale production. Our findings suggest that GO can be reduced by simple eco-friendly method by using E. coli biomass to produce water dispersible graphene. Copyright © 2012 Elsevier B.V. All rights reserved.

  13. Patterns of inpatient care for immigrants in Switzerland: a case control study.

    PubMed

    Lay, Barbara; Lauber, Christoph; Nordt, Carlos; Rössler, Wulf

    2006-03-01

    Migration has become a major political and social concern in West European societies. A case-control method was used to analyse the utilisation of inpatient mental health services by immigrants from a catchment area in Switzerland over a 7-year period. Compared to natives, immigrants had fewer psychiatric hospitalisations, but more emergency and compulsory admissions. During inpatient treatment, they received less psycho-, ergo- and physiotherapy. Other therapies as well as compulsory measures were at comparable rates, as was the frequency of irregular discharge. They spent shorter periods as inpatients and the rate of psychiatric readmissions was significantly lower. Comparison of different countries of origin revealed that only patients from West and North Europe were comparable to natives regarding type of referral, inpatient treatment, and longitudinal measures of service utilisation. Even after accounting for effects of social class, immigrants from South Europe, former Yugoslavia, Turkey, East Europe and more distant countries spent significantly shorter time in inpatient treatment, compared to Swiss control patients. Results of this study clearly point to an underutilisation of inpatient facilities among immigrants with mental disorders, and to disadvantages in psychiatric inpatient care. This, however, does not pertain to all foreign patients to the same extent: inequalities of mental health service use are particularly pronounced in immigrants from more distant countries.

  14. Computer-assisted electrochemical fabrication of a highly selective and sensitive amperometric nitrite sensor based on surface decoration of electrochemically reduced graphene oxide nanosheets with CoNi bimetallic alloy nanoparticles.

    PubMed

    Gholivand, Mohammad-Bagher; Jalalvand, Ali R; Goicoechea, Hector C

    2014-07-01

    For the first time, a novel, robust and very attractive statistical experimental design (ED) using minimum-run equireplicated resolution IV factorial design (Min-Run Res IV FD) coupled with face centered central composite design (FCCCD) and Derringer's desirability function (DF) was developed to fabricate a highly selective and sensitive amperometric nitrite sensor based on electrodeposition of CoNi bimetallic alloy nanoparticles (NPs) on electrochemically reduced graphene oxide (ERGO) nanosheets. The modifications were characterized by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), energy dispersive X-ray spectroscopic (EDS), scanning electron microscopy (SEM) techniques. The CoNi bimetallic alloy NPs were characterized using digital image processing (DIP) for particle counting (density estimation) and average diameter measurement. Under the identified optimal conditions, the novel sensor detects nitrite in concentration ranges of 0.1-30.0 μM and 30.0-330.0 μM with a limit of detection (LOD) of 0.05 μM. This sensor selectively detects nitrite even in the presence of high concentration of common ions and biological interferents therefore, we found that the sensor is highly selective. The sensor also demonstrated an excellent operational stability and good antifouling properties. The proposed sensor was used to the determination of nitrite in several foodstuff and water samples. Copyright © 2014. Published by Elsevier B.V.

  15. The Vasa homolog RDE-12 engages target mRNA and multiple Argonaute proteins to promote RNAi in C. elegans

    PubMed Central

    Shirayama, Masaki; Stanney, William; Gu, Weifeng; Seth, Meetu; Mello, Craig C.

    2014-01-01

    Summary Argonaute proteins (AGOs) are key nuclease effectors of RNA interference (RNAi) [1]. Although purified AGOs can mediate a single round of target-RNA cleavage in vitro, accessory factors are required for short-interfering (si)RNAs loading and to achieve multiple-target turnover [2, 3]. To identify AGO co-factors we immunoprecipitated the C. elegans AGO WAGO-1, which engages amplified small RNAs during RNAi [4]. These studies identified a robust association between WAGO-1 and a conserved Vasa ATPase-related protein RDE-12. rde-12 mutants are deficient in RNAi including viral suppression, and fail to produce amplified secondary siRNAs and certain endogenous siRNAs (endo-siRNAs). RDE-12 co-localizes with WAGO-1 in germline P-granules and in cytoplasmic and peri-nuclear foci in somatic cells. These findings and our genetic studies suggest that RDE-12 is first recruited to target mRNA by upstream AGOs (RDE-1 and ERGO-1) where it promotes small-RNA amplification and/or WAGO-1 loading. Downstream of these events, RDE-12 forms an RNase-resistant (target mRNA-independent) complex with WAGO-1 and may thus have additional functions in target mRNA surveillance and silencing. PMID:24684931

  16. On matters of mind and body: regarding Descartes.

    PubMed

    Urban, Elizabeth

    2018-04-01

    In this paper the author considers Descartes' place in current thinking about the mind-body dilemma. The premise here is that in the history of ideas, the questions posed can be as significant as the answers acquired. Descartes' paramount question was 'How do we determine certainty?' and his pursuit of an answer led to cogito ergo sum. His discovery simultaneously raised the question whether mind is separate from or unified with the body. Some who currently hold that brain and subjectivity are unified contend that the philosopher 'split' mind from body and refer to 'Descartes' error'. This paper puts forward that Descartes' detractors fail to recognise Descartes' contribution to Western thought, which was to introduce the Enlightenment and to give a place to human subjectivity. Added to this, evidence from Descartes' correspondence with Princess Elisabeth of Bohemia supports the conclusion that Descartes did in fact believe in the unity of mind and body although he could not reconcile this rationally with the certainty from personal experience that they were separate substances. In this Descartes was engaged in just the same dilemma as that of current thinkers and researchers, a conflict which still is yet to be resolved. © 2018, The Society of Analytical Psychology.

  17. Matching work capacities and demands at job placement in employees with disabilities.

    PubMed

    Zoer, Ilona; de Graaf, Lucinda; Kuijer, P Paul F M; Prinzie, Peter; Hoozemans, Marco J M; Frings-Dresen, Monique H W

    2012-01-01

    To determine whether employees with disabilities were initially assigned to jobs with work demands that matched their work capacities. Forty-six employees with various physical, mental, sensory and multiple disabilities working in a sheltered workshop. Physical and psychosocial work capacities were assessed post-offer and pre-placement using the Ergo-Kit and Melba. Work demands of the jobs were determined by workplace assessments with TRAC and Melba and were compared with the work capacities. Of the 46 employees, 25 employees were not physically overloaded. When physical overload occurred, it was most often due to regular lifting. All employees were physically underloaded on six or more work activities, most often due to finger dexterity and manipulation. Almost all employees (n=43) showed psychosocial overload or underload on one or more psychosocial characteristics. Psychosocial overload was most often due to endurance (long-term work performance), while psychosocial underload was most often due to speaking and writing. Despite the assessment of work capacities at job placement, underload and overload occurred on both physical activities and psychosocial characteristics. Assessing both work capacities and work demands before job placement is recommended. At job placement more attention should be paid to overloading due to lifting and long-term work performance.

  18. A numerical approach to finding general stationary vacuum black holes

    NASA Astrophysics Data System (ADS)

    Adam, Alexander; Kitchen, Sam; Wiseman, Toby

    2012-08-01

    The Harmonic Einstein equation is the vacuum Einstein equation supplemented by a gauge fixing term which we take to be that of DeTurck. For static black holes analytically continued to Riemannian manifolds without boundary at the horizon, this equation has previously been shown to be elliptic, and Ricci flow and Newton’s method provide good numerical algorithms to solve it. Here we extend these techniques to the arbitrary cohomogeneity stationary case which must be treated in Lorentzian signature. For stationary spacetimes with globally timelike Killing vector the Harmonic Einstein equation is elliptic. In the presence of horizons and ergo-regions it is less obviously so. Motivated by the Rigidity theorem we study a class of stationary black hole spacetimes which is general enough to include many interesting higher dimensional solutions. We argue the Harmonic Einstein equation consistently truncates to this class of spacetimes giving an elliptic problem. The Killing horizons and axes of rotational symmetry are boundaries for this problem and we determine boundary conditions there. As a simple example we numerically construct 4D rotating black holes in a cavity using Anderson’s boundary conditions. We demonstrate both Newton’s method and Ricci flow to find these Lorentzian solutions.

  19. Illicit use of androgens and other hormones: recent advances.

    PubMed

    Kanayama, Gen; Pope, Harrison G

    2012-06-01

    To summarize recent advances in studies of illicit use of androgens and other hormones. Androgens and other appearance-enhancing and performance-enhancing substances are widely abused worldwide. Three notable clusters of findings have emerged in this field in recent years. First, studies almost unanimously find that androgen users engage in polypharmacy, often ingesting other hormones (e.g., human growth hormone, thyroid hormones, and insulin), ergo/thermogenic drugs (e.g., caffeine, ephedrine, and clenbuterol), and classical drugs of abuse (e.g., cannabis, opiates, and cocaine). Second, reports of long-term psychiatric and medical adverse effects of androgens continue to accumulate. In cardiovascular research particularly, controlled studies have begun to supersede anecdotal evidence, strengthening the case that androgens (possibly acting synergistically with other abused drugs) may cause significant morbidity and even mortality. Third, it is increasingly recognized that androgen use may lead to a dependence syndrome with both psychological and physiological origins. Androgen dependence likely affects some millions of individuals worldwide, and arguably represents the least studied major class of illicit drug dependence. Given mounting evidence of the adverse effects of androgens and associated polypharmacy, this topic will likely represent an expanding area of research and an issue of growing public health concern.

  20. The default mode network in chimpanzees (Pan troglodytes) is similar to that of humans.

    PubMed

    Barks, Sarah K; Parr, Lisa A; Rilling, James K

    2015-02-01

    The human default mode network (DMN), comprising medial prefrontal cortex, precuneus, posterior cingulate cortex, lateral parietal cortex, and medial temporal cortex, is highly metabolically active at rest but deactivates during most focused cognitive tasks. The DMN and social cognitive networks overlap significantly in humans. We previously demonstrated that chimpanzees (Pan troglodytes) show highest resting metabolic brain activity in the cortical midline areas of the human DMN. Human DMN is defined by task-induced deactivations, not absolute resting metabolic levels; ergo, resting activity is insufficient to define a DMN in chimpanzees. Here, we assessed the chimpanzee DMN's deactivations relative to rest during cognitive tasks and the effect of social content on these areas' activity. Chimpanzees performed a match-to-sample task with conspecific behavioral stimuli of varying sociality. Using [(18)F]-FDG PET, brain activity during these tasks was compared with activity during a nonsocial task and at rest. Cortical midline areas in chimpanzees deactivated in these tasks relative to rest, suggesting a chimpanzee DMN anatomically and functionally similar to humans. Furthermore, when chimpanzees make social discriminations, these same areas (particularly precuneus) are highly active relative to nonsocial tasks, suggesting that, as in humans, the chimpanzee DMN may play a role in social cognition. © The Author 2013. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  1. A sensitive, selective and rapid determination of lead(II) ions in real-life samples using an electrochemically reduced graphene oxide-graphite reinforced carbon electrode.

    PubMed

    Hamsawahini, Kunashegaran; Sathishkumar, Palanivel; Ahamad, Rahmalan; Yusoff, Abdull Rahim Mohd

    2015-11-01

    In this study, a sensitive and cost-effective electrochemically reduced graphene oxide (ErGO) on graphite reinforced carbon (GRC) was developed for the detection of lead (Pb(II)) ions present in the real-life samples. A film of graphene oxide (GO) was drop-casted on GRC and their electrochemical properties were investigated using cyclic voltammetry (CV), amperometry and square wave voltammetry (SWV). Factors influencing the detection of Pb(II) ions, such as grades of GRC, constant applied cathodic potential (CACP), concentration of hydrochloric acid and drop-casting drying time were optimised. GO is irreversibly reduced in the range of -0.7 V to -1.6 V vs Ag/AgCl (3 M) in acidic condition. The results showed that the reduction behaviour of GO contributed to the high sensitivity of Pb(II) ions detection even at nanomolar level. The ErGO-GRC showed the detection limit of 0.5 nM and linear range of 3-15 nM in HCl (1 M). The developed electrode has potential to be a good candidate for the determination of Pb(II) ions in different aqueous system. The proposed method gives a good recovery rate of Pb(II) ions in real-life water samples such as tap water and river water. Copyright © 2015 Elsevier B.V. All rights reserved.

  2. The green tea modulates large intestinal microbiome and exo/endogenous metabolome altered through chronic UVB-exposure.

    PubMed

    Jung, Eun Sung; Park, Hye Min; Hyun, Seung Min; Shon, Jong Cheol; Singh, Digar; Liu, Kwang-Hyeon; Whon, Tae Woong; Bae, Jin-Woo; Hwang, Jae Sung; Lee, Choong Hwan

    2017-01-01

    The attenuating effects of green tea supplements (GTS) against the ultraviolet (UV) radiation induced skin damages are distinguished. However, the concomitant effects of GTS on the large intestinal microbiomes and associated metabolomes are largely unclear. Herein, we performed an integrated microbiome-metabolome analysis to uncover the esoteric links between gut microbiome and exo/endogenous metabolome maneuvered in the large intestine of UVB-exposed mice subjected to dietary GTS. In UVB-exposed mice groups (UVB), class Bacilli and order Bifidobacteriales were observed as discriminant taxa with decreased lysophospholipid levels compared to the unexposed mice groups subjected to normal diet (NOR). Conversely, in GTS fed UVB-exposed mice (U+GTS), the gut-microbiome diversity was greatly enhanced with enrichment in the classes, Clostridia and Erysipelotrichia, as well as genera, Allobaculum and Lachnoclostridium. Additionally, the gut endogenous metabolomes changed with an increase in amino acids, fatty acids, lipids, and bile acids contents coupled with a decrease in nucleobases and carbohydrate levels. The altered metabolomes exhibited high correlations with GTS enriched intestinal microflora. Intriguingly, the various conjugates of green tea catechins viz., sulfated, glucuronided, and methylated ones including their exogenous derivatives were detected from large intestinal contents and liver samples. Hence, we conjecture that the metabolic conversions for the molecular components in GTS strongly influenced the gut micro-environment in UVB-exposed mice groups, ergo modulate their gut-microbiome as well as exo/endogenous metabolomes.

  3. The effect of using a laptopstation compared to using a standard laptop PC on the cervical spine torque, perceived strain and productivity.

    PubMed

    Berkhout, Anna Lindblad; Hendriksson-Larsén, Karin; Bongers, Paulien

    2004-03-01

    The objective of this study was to assess the effect of using a laptopstation and a laptop PC and how this difference in work set-up affected the mechanical load on the neck (C7-Th1 segment), the subjective evaluation of strain on the neck and productivity. Ten healthy male students at Umeå University, Sweden with an average of 10 years of PC work experience and an average of 18 months of laptop PC work experience participated in the study. For each research subject measurements were divided into two parts; sitting working at the ErgoQ laptopstation in test situation A, and sitting working at a conventional laptop PC, test situation B. Each part took 4h and was scheduled on two consecutive days. Photography and biomechanical analysis was used to calculate the torque at the neck. To examine perceived strain the Borg Scale was used and to assess performance a productivity score was calculated. The results in the study demonstrated a significant (p<0.05) difference with the use of the laptopstation resulting in decreased torque at the C7-Th1 segment, less perceived strain at the neck and a higher productivity score. In conclusion, the results of the study confirm the importance of adjustable work tools that recognize anthropometric differences and biomechanics to meet the needs of individual customers during continuous visual display terminal work.

  4. Superradiant instabilities of rotating black branes and strings

    NASA Astrophysics Data System (ADS)

    Cardoso, Vitor; Yoshida, Shijun

    2005-07-01

    Black branes and strings are generally unstable against a certain sector of gravitational perturbations. This is known as the Gregory-Laflamme instability. It has been recently argued [1], [2] that there exists another general instability affecting many rotating extended black objects. This instability is in a sense universal, in that it is triggered by any massless field, and not just gravitational perturbations. Here we investigate this novel mechanism in detail. For this instability to work, two ingredients are necessary: (i) an ergo-region, which gives rise to superradiant amplification of waves, and (ii) ``bound'' states in the effective potential governing the evolution of the particular mode under study. We show that the black brane Kerr4×Rp is unstable against this mechanism, and we present numerical results for instability timescales for this case. On the other hand, and quite surprisingly, black branes of the form Kerrd×Rp are all stable against this mechanism for d > 4. This is quite an unexpected result, and it stems from the fact that there are no stable circular orbits in higher dimensional black hole spacetimes, or in a wave picture, that there are no bound states in the effective potential. We also show that it is quite easy to simulate this instability in the laboratory with acoustic black branes.

  5. Analysis of laser radar measurements of the asteroid 433 Eros

    NASA Astrophysics Data System (ADS)

    Cole, Timothy D.; Zuber, Maria T.; Neuman, Greg; Cheng, Andrew F.; Reiter, R. Alan; Guo, Yanping; Smith, David E.

    2001-09-01

    After a 5-year mission, a 4-year transit followed by a one-year mission orbiting the asteroid 433 Eros, the Near-Earth Asteroid Rendezvous-Shoemaker (NEAR) spacecraft made a controlled landing onto the asteroid's surface on 12 February 2001. Onboard the spacecraft, the NEAR Laser Rangefinder (NLR) facility instrument had gathered over 11 million measurements, providing a spatially dense, high-resolution, topographical map of Eros. This topographic data, combined with Doppler tracking data for the spacecraft, enabled the determination of the asteroid's shape, mass, and density thereby contributing to understanding the internal structure and collisional evolution of Eros. NLR data indicate that Eros is a consolidated body with a complex shape dominated by collisions. The offset between the asteroid's center of mass and center of figure indicates a small deviation from a homogeneous internal structure that is most simply explained by variations in mechanical structure. Regional-scale relief and slope distributions show evidence for control of some topography by a competent substrate. It was found that pulse dilation was the major source of uncertainty in single-shot range measurements from the NLR, and that this uncertainty remains consistent with the overall 6-m range measurement system accuracy for NEAR. Analysis of NLR data fully quantified the geodynamic nature of this planetesimal, ergo, illustrating the utility of laser altimetry for remote sensing.

  6. Field-aligned currents in the undisturbed polar ionosphere

    NASA Astrophysics Data System (ADS)

    Kroehl, H. W.

    1989-09-01

    Field-aligned currents, FAC's, which couple ionospheric currents at high latitudes with magnetospheric currents have become an essential cornerstone to our understanding of plasma dynamics in the polar region and in the earth's magnetosphere. Initial investigators of polar electrodynamics including the aurora were unable to distinguish between the ground magnetic signatures of a purely two-dimensional current and those from a three-dimensional current system, ergo many scientists ignored the possible existence of these vertical currents. However, data from magnetometers and electrostatic analyzers flown on low-altitude, polar-orbiting satellites proved beyond any reasonable doubt that field-aligned currents existed, and that different ionospheric regions were coupled to different magnetospheric regions which were dominated by different electrodynamic processes, e.g., magnetospheric convection electric fields, magnetospheric substorms and parallel electric fields. Therefore, to define the “undisturbed” polar ionosphere and its structure and dynamics, one needs to consider these electrodynamic processes, to select times for analysis when they are not strongly active and to remember that the polar ionosphere may be disturbed when the equatorial, mid-latitude and sub-auroral ionospheres are not. In this paper we will define the principle high-latitude current systems, describe the effects of FAC's associated with these systems, review techniques which would minimize these effects and present our description of the “undisturbed” polar ionosphere.

  7. An exploratory study of barriers to inclusion in the European workplace.

    PubMed

    Moody, Louise; Saunders, Janet; Leber, Marjan; Wójcik-Augustyniak, Marzena; Szajczyk, Marek; Rebernik, Nataša

    2017-10-01

    The European Disability Strategy (2010-2020) seeks to significantly raise the proportion of people with disabilities working in the open labour market. The ERGO WORK project is a collaboration of academic and industrial partners in six European countries, focused on understanding and tackling barriers to workplace inclusion for workers with disabilities. This study sought to explore the perceptions and needs of stakeholders in terms of workplace adaptation to the needs of employees with disabilities. An exploratory online survey was completed by 480 participants across six countries. The analysis suggests that workplaces could be further improved to meet the needs of employees with considerable scope for training within companies to raise awareness about employees' needs, employers' obligations and workplace adaptation. This snapshot suggests there is still a gap between intent and reality in workplace inclusion and further strategies are needed to improve the opportunities for employees with disabilities. The paper argues that ergonomics may have a key role to play in tackling these challenges and adapting the workplace environment and job design to suit the needs of individual employees. Implications for rehabilitation This study suggests there is considerable scope for workplace adaptation and improvements to meet the needs of employees with disabilities. Employers need and want further specialist practitioner guidance to facilitate workplace inclusion and support adaptation to individual needs. Organisations would benefit from training to raise awareness about potential solutions and approaches that would support more widespread employment of people with disabilities.

  8. Cardiac frequency and cutaneous microcirculation during and after exercising in the view of physical condition.

    PubMed

    Saemann, Lars; Lachner, Karin; Wenzel, Folker

    2017-01-01

    In the field of cardiovascular diseases an ergometer test is a common diagnostical method in which a change in microcirculation can be reached. In this paper cardiac frequency and cutaneous microcirculation during and after exercising will be compared with each other. The cutaneous microcirculation of  6 healthy volunteers (2 females, 4 males) is measured. As an instrument the PeriFlux 5000 combined with a Laser-Doppler-Flow(LDF)-Probe (Perimed Instruments) is used. The cardiac frequency (CF) is measured by the POLAR T31 sensor and as an ergometer the ERGO-FIT ® 457 is used. The mean initial LDF (97,7±57,3 PU) decreases at the beginning (64,5±21,7 PU), increases during theexercise, reaches its maximum (247,8±82,1 PU) after the end of the exercise and drops to lower values (256,4±69,5 PU)after a few minutes. Contrasting to the LDF the mean initial CF (86±22/min) increases at the beginning (97±9/min),furthermore during the whole exercise (103±9/min) and then falls after having finished the exercise (96±3/min).Furthermore, during regeneration, one can see the CF decreasing towards its initial value, while LDF reaches its maximum. In further studies, realized with volunteers with well-known levels of physical condition, a directconnection between cutaneous microcirculation and physical condition might be found.

  9. Improving the efficiency of copper indium gallium (Di-)selenide (CIGS) solar cells through integration of a moth-eye textured resist with a refractive index similar to aluminum doped zinc oxide

    NASA Astrophysics Data System (ADS)

    Burghoorn, M.; Kniknie, B.; van Deelen, J.; Xu, M.; Vroon, Z.; van Ee, R.; van de Belt, R.; Buskens, P.

    2014-12-01

    Textured transparent conductors are widely used in thin-film silicon solar cells. They lower the reflectivity at interfaces between different layers in the cell and/or cause an increase in the path length of photons in the Si absorber layer, which both result in an increase in the number of absorbed photons and, consequently, an increase in short-circuit current density (Jsc) and cell efficiency. Through optical simulations, we recently obtained strong indications that texturing of the transparent conductor in copper indium gallium (di-)selenide (CIGS) solar cells is also optically advantageous. Here, we experimentally demonstrate that the Jsc and efficiency of CIGS solar cells with an absorber layer thickness (dCIGS) of 0.85 μm, 1.00 μm and 2.00 μm increase through application of a moth-eye textured resist with a refractive index that is sufficiently similar to AZO (nresist = 1.792 vs. nAZO = 1.913 at 633 nm) to avoid large optical losses at the resist-AZO interface. On average, Jsc increases by 7.2%, which matches the average reduction in reflection of 7.0%. The average relative increase in efficiency is slightly lower (6.0%). No trend towards a larger relative increase in Jsc with decreasing dCIGS was observed. Ergo, the increase in Jsc can be fully explained by the reduction in reflection, and we did not observe any increase in Jsc based on an increased photon path length.

  10. The effect of morphological and functional variables on ranking position of professional junior Basque surfers.

    PubMed

    Fernández-López, Juan Ramón; Cámara, Jesús; Maldonado, Sara; Rosique-Gracia, Javier

    2013-01-01

    The aim of this study was to analyse the association of morphology as well as functional outcomes during a paddling test with ranking position (RP) of competitive junior surfers. Ten male surfers (age, mean 17.60, s=2.06 years) performed a maximum incremental test on a modified ergometer (Ergo Vasa Swim, USA) to determine, per unit of weight, the relative heart rate at lactate threshold (RHRLT) and at onset of blood lactate accumulation (RHROBLA) and the relative power output at LT (RWLT) and at OBLA (RWOBLA). Anthropometrics were weight, height and sum of six skinfolds (subscapular, triceps, supraspinal, abdominal, anterior thigh and calf) and Heath-Carter anthropometric somatotypes. A stepwise multiple regression was constructed to model and predict RP. Surfers shared a relative short stature and light weight, with a broader range of skinfold thickness (174.30, s=0.07 cm; 66.73, s=5.91 kg; 57.03, s=12.29 mm) and mean somatotype was ectomorphic-mesomorph: 2.20-4.36-3.09 (Category 2). Two model equations were possible: (A) RP = - 244.550 RWOBLA+262.787; (B) RP = - 217.028·RWOBLA+31.21·endomorphy + 169.16 with 63.1% and 83% of variance explained, respectively. A hierarchical cluster analysis on the Euclidean distances of the variables in model B also distinguished between upper and lower ranking groups. RWOBLA was more useful than endomorphy, anthropometric measures and also than the other functional outcomes to predict RPs. RWOBLA and endomorphy should be considered important variables that may influence the success of these young competitive surfers.

  11. Potential intake of vitamins "A" and "D" through branded intravenous lipid emulsions: Liquid Chromatography-Tandem Mass Spectrometry Analysis.

    PubMed

    Forchielli, Maria Luisa; Conti, Matteo; Patrono, Daniela; Mancini, Rita; Pession, Andrea; Puggioli, Cristina; Bersani, Germana

    2017-04-01

    No data exist for vitamin A group and vitamin D2/D3 content in branded intravenous lipid emulsions (ILEs). Our goal is to evaluate and quantify their concentrations in different ILEs to assess whether they are clinically relevant. Analyses were carried out in triplicates on six ILEs: 1) 30% soybean oil-based, 2) 20% olive-soybean oil based, 3) 10 + 10% soybean - MCT coconut oil based, 4) 20% soybean-olive-MCT-fish oil based, 5) 20% soybean-MCT-fish oil based and 6) 10% pure fish oil based, respectively. Retinol group (vitamin A) and ergo-chole-calciferol (vitamin D2/D3) were analyzed and quantified by a quali-quantitative Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) method after potassium hydroxide alkaline hydrolysis, hexane extraction, reverse phase-liquid chromatography and specific multiple-reaction-monitoring (MRM) detection. On average, measured retinol content was in the range of 200-1000 μg/L in ILEs (1,2, and 3), whereas it was higher (1000-2000 μg/L) in the ILEs containing fish-oil. Vitamin D content was in the range of 1-10 μg/L in the fish-oil based ILEs, but undetectable in those ILEs containing purely vegetable oils. This study shows that vitamin A and D contents are variably present in ILEs based on their different lipid sources. Both contents should be explicitly mentioned in the products. Copyright © 2016 Elsevier Ltd and European Society for Clinical Nutrition and Metabolism. All rights reserved.

  12. C. elegans ADARs antagonize silencing of cellular dsRNAs by the antiviral RNAi pathway.

    PubMed

    Reich, Daniel P; Tyc, Katarzyna M; Bass, Brenda L

    2018-02-01

    Cellular dsRNAs are edited by adenosine deaminases that act on RNA (ADARs). While editing can alter mRNA-coding potential, most editing occurs in noncoding sequences, the function of which is poorly understood. Using dsRNA immunoprecipitation (dsRIP) and RNA sequencing (RNA-seq), we identified 1523 regions of clustered A-to-I editing, termed editing-enriched regions (EERs), in four stages of Caenorhabditis elegans development, often with highest expression in embryos. Analyses of small RNA-seq data revealed 22- to 23-nucleotide (nt) siRNAs, reminiscent of viral siRNAs, that mapped to EERs and were abundant in adr-1;adr-2 mutant animals. Consistent with roles for these siRNAs in silencing, EER-associated genes (EAGs) were down-regulated in adr-1;adr-2 embryos, and this was dependent on associated EERs and the RNAi factor RDE-4. We observed that ADARs genetically interact with the 26G endogenous siRNA (endo-siRNA) pathway, which likely competes for RNAi components; deletion of factors required for this pathway ( rrf-3 or ergo-1 ) in adr-1;adr-2 mutant strains caused a synthetic phenotype that was rescued by deleting antiviral RNAi factors. Poly(A) + RNA-seq revealed EAG down-regulation and antiviral gene induction in adr-1;adr-2;rrf-3 embryos, and these expression changes were dependent on rde-1 and rde-4 Our data suggest that ADARs restrict antiviral silencing of cellular dsRNAs. © 2018 Reich et al.; Published by Cold Spring Harbor Laboratory Press.

  13. Development and Evaluation of Ergonomic Interventions for Bucket Handling on Farms

    PubMed Central

    Fathallah, Fadi A.; Tang, Steven C.H.; Waters, Thomas R.

    2016-01-01

    Objective The aim of this study was to introduce and evaluate two interventions, Ergo Bucket Carrier (EBC) and Easy Lift (EL), for youths (and adults) to handle water/feed buckets on farms. Background The physical activities of both adult and youth farm workers contribute to the development of low-back disorders (LBDs). Many of the activities youths perform on farms are associated with increased LBD risk, particularly, the handling of water and feed buckets. Methods Seventeen adult and youth participants (10 males and seven females) participated in this study. To assess the risk of LBDs, the participants were instrumented with a three-dimensional spinal electrogoniometer while lifting, carrying, and dumping water buckets using traditional method and the two interventions. Results For both the adult and youth groups, the results showed that the two interventions significantly decrease the magnitudes of LBD risk in many of the tasks evaluated. Overall, the use of the EBC resulted in a 41% reduction in the level of LBD risk for the carrying task, and a reduction of 69% for the dumping task. Using the EL, on the other hand, is especially effective for lifting tasks (55% reduction in LBD risk). Results of the subjective response were consistent with the objective evaluations. Conclusion This study demonstrated the potential for ergonomic interventions in reducing LBD risk during the common farming task of bucket handling. Application Potential application of this study includes the introduction of the EBC and EL in family farms to reduce the LBD risk among youth and adult farmers. PMID:26994024

  14. Horizon structure of rotating Einstein-Born-Infeld black holes and shadow

    NASA Astrophysics Data System (ADS)

    Atamurotov, Farruh; Ghosh, Sushant G.; Ahmedov, Bobomurat

    2016-05-01

    We investigate the horizon structure of the rotating Einstein-Born-Infeld solution which goes over to the Einstein-Maxwell's Kerr-Newman solution as the Born-Infeld parameter goes to infinity (β → ∞). We find that for a given β , mass M, and charge Q, there exist a critical spinning parameter aE and rHE, which corresponds to an extremal Einstein-Born-Infeld black hole with degenerate horizons, and aE decreases and rHE increases with increase of the Born-Infeld parameter β , while aergo-region is also included. It is well known that a black hole can cast a shadow as an optical appearance due to its strong gravitational field. We also investigate the shadow cast by the both static and rotating Einstein-Born-Infeld black hole and demonstrate that the null geodesic equations can be integrated, which allows us to investigate the shadow cast by a black hole which is found to be a dark zone covered by a circle. Interestingly, the shadow of an Einstein-Born-Infeld black hole is slightly smaller than for the Reissner-Nordstrom black hole, which consists of concentric circles, for different values of the Born-Infeld parameter β , whose radius decreases with increase of the value of the parameter β . Finally, we have studied observable distortion parameter for shadow of the rotating Einstein-Born-Infeld black hole.

  15. Improving the efficiency of copper indium gallium (Di-)selenide (CIGS) solar cells through integration of a moth-eye textured resist with a refractive index similar to aluminum doped zinc oxide

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Burghoorn, M.; Kniknie, B.; Deelen, J. van

    2014-12-15

    Textured transparent conductors are widely used in thin-film silicon solar cells. They lower the reflectivity at interfaces between different layers in the cell and/or cause an increase in the path length of photons in the Si absorber layer, which both result in an increase in the number of absorbed photons and, consequently, an increase in short-circuit current density (J{sub sc}) and cell efficiency. Through optical simulations, we recently obtained strong indications that texturing of the transparent conductor in copper indium gallium (di-)selenide (CIGS) solar cells is also optically advantageous. Here, we experimentally demonstrate that the J{sub sc} and efficiency ofmore » CIGS solar cells with an absorber layer thickness (d{sub CIGS}) of 0.85 μm, 1.00 μm and 2.00 μm increase through application of a moth-eye textured resist with a refractive index that is sufficiently similar to AZO (n{sub resist} = 1.792 vs. n{sub AZO} = 1.913 at 633 nm) to avoid large optical losses at the resist-AZO interface. On average, J{sub sc} increases by 7.2%, which matches the average reduction in reflection of 7.0%. The average relative increase in efficiency is slightly lower (6.0%). No trend towards a larger relative increase in J{sub sc} with decreasing d{sub CIGS} was observed. Ergo, the increase in J{sub sc} can be fully explained by the reduction in reflection, and we did not observe any increase in J{sub sc} based on an increased photon path length.« less

  16. Private equity ownership and nursing home financial performance.

    PubMed

    Pradhan, Rohit; Weech-Maldonado, Robert; Harman, Jeffrey S; Laberge, Alex; Hyer, Kathryn

    2013-01-01

    Private equity has acquired multiple large nursing home chains within the last few years; by 2009, it owned nearly 1,900 nursing homes. Private equity is said to improve the financial performance of acquired facilities. However, no study has yet examined the financial performance of private equity nursing homes, ergo this study. The primary purpose of this study is to understand the financial performance of private equity nursing homes and how it compares with other investor-owned facilities. It also seeks to understand the approach favored by private equity to improve financial performance-for instance, whether they prefer to cut costs or maximize revenues or follow a mixed approach. Secondary data from Medicare cost reports, the Online Survey, Certification and Reporting, Area Resource File, and Brown University's Long-term Care Focus data set are combined to construct a longitudinal data set for the study period 2000-2007. The final sample is 2,822 observations after eliminating all not-for-profit, independent, and hospital-based facilities. Dependent financial variables consist of operating revenues and costs, operating and total margins, payer mix (census Medicare, census Medicaid, census other), and acuity index. Independent variables primarily reflect private equity ownership. The study was analyzed using ordinary least squares, gamma distribution with log link, logit with binomial family link, and logistic regression. Private equity nursing homes have higher operating margin as well as total margin; they also report higher operating revenues and costs. No significant differences in payer mix are noted. Results suggest that private equity delivers superior financial performance compared with other investor-owned nursing homes. However, causes for concern remain particularly with the long-term financial sustainability of these facilities.

  17. The Caenorhabditis elegans RDE-10/RDE-11 complex regulates RNAi by promoting secondary siRNA amplification.

    PubMed

    Zhang, Chi; Montgomery, Taiowa A; Fischer, Sylvia E J; Garcia, Susana M D A; Riedel, Christian G; Fahlgren, Noah; Sullivan, Christopher M; Carrington, James C; Ruvkun, Gary

    2012-05-22

    In nematodes, plants, and fungi, RNAi is remarkably potent and persistent due to the amplification of initial silencing signals by RNA-dependent RNA polymerases (RdRPs). In Caenorhabditis elegans (C. elegans), the interaction between the RNA-induced silencing complex (RISC) loaded with primary small interfering RNAs (siRNAs) and the target messenger RNA (mRNA) leads to the recruitment of RdRPs and synthesis of secondary siRNAs using the target mRNA as the template. The mechanism and genetic requirements for secondary siRNA accumulation are not well understood. From a forward genetic screen for C. elegans genes required for RNAi, we identified rde-10, and through proteomic analysis of RDE-10-interacting proteins, we identified a protein complex containing the new RNAi factor RDE-11, the known RNAi factors RSD-2 and ERGO-1, and other candidate RNAi factors. The RNAi defective genes rde-10 and rde-11 encode a novel protein and a RING-type zinc finger domain protein, respectively. Mutations in rde-10 and rde-11 genes cause dosage-sensitive RNAi deficiencies: these mutants are resistant to low dosage but sensitive to high dosage of double-stranded RNAs. We assessed the roles of rde-10, rde-11, and other dosage-sensitive RNAi-defective genes rsd-2, rsd-6, and haf-6 in both exogenous and endogenous small RNA pathways using high-throughput sequencing and qRT-PCR. These genes are required for the accumulation of secondary siRNAs in both exogenous and endogenous RNAi pathways. The RDE-10/RDE-11 complex is essential for the amplification of RNAi in C. elegans by promoting secondary siRNA accumulation. Copyright © 2012 Elsevier Ltd. All rights reserved.

  18. Descartes' Passions of the soul--seeds of psychiatry?

    PubMed

    Albuquerque, Joy; Deshauer, Dorian; Grof, Paul

    2003-09-01

    Rene Descartes (1596-1650), often called the 'father of modern philosophy', aimed at rooting all knowledge in certainty so that our understanding of the world could progress without error. To achieve this, he needed at least one sure thing on which to build. Starting with the most basic knowledge, the fact of his own existence--cogito ergo sum (I think therefore I am), he systematically proceeded to explain the world. Such systematic understanding would be accessible to anyone who applied the Cartesian method, and in turn would lead to a good life. Descartes' Passions of the Soul was written according to his method of certainty and fits in with a meticulously refined worldview. It is one of the first systematic treatises to explain a wide array of emotions, both normal and abnormal. Based on the Cartesian dualistic model of mind and body, the work helps ground a long medical tradition of separating 'rational' consciousness from emotions. For Descartes, emotions arose from two sources, the intellect and the body (Passions of the Soul and Passions of the Body). The more subtle 'Passions of the Soul' were viewed as superior to coarser and often-troublesome emotions taking root in the body. It is interesting to note the absence of clarity, however, in Descartes' division of intellectual emotions from bodily emotions, perhaps revealing an enduring weakness in the dualistic model itself. The work grapples with the multi-causal nature of psychopathology and brings out complex interactions between temperament and life experience. While modern neuroscience makes ever-tighter associations between physiology and experience, many of the basic scientific challenges we face today are outlined in this 350-year-old book.

  19. Pheochromocytoma and paraganglioma

    PubMed Central

    Kantorovich, Vitaly; Pacak, Karel

    2016-01-01

    Pheochromocytoma is a very special kind of tumor full of duplicity. On the one hand it represents its own microworld with unique clinical, biochemical and pathological features, while on the other it constitutes a tremendously significant part of whole body system, playing a vital role for practically every organ system. It has a very special character – sometimes like a child it can be sweet and predictable, while at times it can behave like a deadly wild beast, crashing and tearing everything on its path in a fierce rage. It also consists of the amazingly intelligent neuroendocrine cells that possess a magical ability to make miraculous substances of many kinds. But most of all, it is a system that is able to drive our curiosity and the itch of “Cogito, ergo sum” to limitless depths and year by year it still amazes us with new and unexpected discoveries that move our understanding of multiple pathways and metabolic events closer to the ultimate truth. Recent discoveries of succinate dehydrogenase (SHD) and prolyl hydroxylase (PHD) mutations, for example, propelled our understanding of neuroendocrine tumorigenesis as a whole, as well as physiology of mitochondrial respiratory chain and phenomenon of pseudohypoxia in particular. Good old discoveries make their way from dusty repositories to shine with new meaning, appropriate for the current level of knowledge. This acquired wisdom makes us better physicians – knowing the specific expression makeup of catecholamine transporters, GLUTs and SRIFs allows for better tailored imaging and therapeutic manipulations. There are still long ways to go, keeping in mind that pheochromocytoma is but so very special, and we are optimistic and expect many great things to come. PMID:20541673

  20. Relation between physical capacity, nutritional status and systemic inflammation in COPD.

    PubMed

    Hallin, Runa; Janson, Christer; Arnardottir, Ragnheiður Harpa; Olsson, Roger; Emtner, Margareta; Branth, Stefan; Boman, Gunnar; Slinde, Frode

    2011-07-01

    Decreased physical capacity, weight loss, fat-free mass depletion and systemic inflammation are frequently observed in patients with chronic obstructive pulmonary disease (COPD). Our aim was to examine relations between physical capacity, nutritional status, systemic inflammation and disease severity in COPD. Forty nine patients with moderate to severe COPD were included in the study. Spirometry was preformed. Physical capacity was determined by a progressive symptom limited cycle ergo meter test, incremental shuttle walking test, 12-minute walk distance and hand grip strength test. Nutritional status was investigated by anthropometric measurements, (weight, height, arm and leg circumferences and skinfold thickness) and bioelectrical impedance assessment was performed. Blood samples were analyzed for C-reactive protein (CRP) and fibrinogen. Working capacity was positively related to forced expiratory volume in 1 s (FEV(1) ) (p < 0.001), body mass index and fat free mass index (p = 0.01) and negatively related to CRP (p = 0.02) and fibrinogen (p = 0.03). Incremental shuttle walk test was positively related to FEV(1) (p < 0.001) and negatively to CRP (p = 0.048). Hand grip strength was positively related to fat free mass index, and arm and leg circumferences. Fifty to 76% of the variation in physical capacity was accounted for when age, gender, FEV(1) , fat free mass index and CRP were combined in a multiple regression model. Physical capacity in chronic obstructive pulmonary disease is related to lung function, body composition and systemic inflammation. A depiction of all three aspects of the disease might be important when targeting interventions in chronic obstructive pulmonary disease. © 2010 Blackwell Publishing Ltd.

  1. Accuracy of Jump-Mat Systems for Measuring Jump Height.

    PubMed

    Pueo, Basilio; Lipinska, Patrycja; Jiménez-Olmedo, José M; Zmijewski, Piotr; Hopkins, Will G

    2017-08-01

    Vertical-jump tests are commonly used to evaluate lower-limb power of athletes and nonathletes. Several types of equipment are available for this purpose. To compare the error of measurement of 2 jump-mat systems (Chronojump-Boscosystem and Globus Ergo Tester) with that of a motion-capture system as a criterion and to determine the modifying effect of foot length on jump height. Thirty-one young adult men alternated 4 countermovement jumps with 4 squat jumps. Mean jump height and standard deviations representing technical error of measurement arising from each device and variability arising from the subjects themselves were estimated with a novel mixed model and evaluated via standardization and magnitude-based inference. The jump-mat systems produced nearly identical measures of jump height (differences in means and in technical errors of measurement ≤1 mm). Countermovement and squat-jump height were both 13.6 cm higher with motion capture (90% confidence limits ±0.3 cm), but this very large difference was reduced to small unclear differences when adjusted to a foot length of zero. Variability in countermovement and squat-jump height arising from the subjects was small (1.1 and 1.5 cm, respectively, 90% confidence limits ±0.3 cm); technical error of motion capture was similar in magnitude (1.7 and 1.6 cm, ±0.3 and ±0.4 cm), and that of the jump mats was similar or smaller (1.2 and 0.3 cm, ±0.5 and ±0.9 cm). The jump-mat systems provide trustworthy measurements for monitoring changes in jump height. Foot length can explain the substantially higher jump height observed with motion capture.

  2. ICEPmu1, an integrative conjugative element (ICE) of Pasteurella multocida: structure and transfer.

    PubMed

    Michael, Geovana Brenner; Kadlec, Kristina; Sweeney, Michael T; Brzuszkiewicz, Elzbieta; Liesegang, Heiko; Daniel, Rolf; Murray, Robert W; Watts, Jeffrey L; Schwarz, Stefan

    2012-01-01

    Integrative and conjugative elements (ICEs) have not been detected in Pasteurella multocida. In this study the multiresistance ICEPmu1 from bovine P. multocida was analysed for its core genes and its ability to conjugatively transfer into strains of the same and different genera. ICEPmu1 was identified during whole genome sequencing. Coding sequences were predicted by bioinformatic tools and manually curated using the annotation software ERGO. Conjugation into P. multocida, Mannheimia haemolytica and Escherichia coli recipients was performed by mating assays. The presence of ICEPmu1 and its circular intermediate in the recipient strains was confirmed by PCR and sequence analysis. Integration sites were sequenced. Susceptibility testing of the ICEPmu1-carrying recipients was conducted by broth microdilution. The 82 214 bp ICEPmu1 harbours 88 genes. The core genes of ICEPmu1, which are involved in excision/integration and conjugative transfer, resemble those found in a 66 641 bp ICE from Histophilus somni. ICEPmu1 integrates into a tRNA(Leu) and is flanked by 13 bp direct repeats. It is able to conjugatively transfer to P. multocida, M. haemolytica and E. coli, where it also uses a tRNA(Leu) for integration and produces closely related 13 bp direct repeats. PCR assays and susceptibility testing confirmed the presence and the functional activity of the ICEPmu1-associated resistance genes in the recipient strains. The observation that the multiresistance ICEPmu1 is present in a bovine P. multocida and can easily spread across strain and genus boundaries underlines the risk of a rapid dissemination of multiple resistance genes, which will distinctly decrease the therapeutic options.

  3. Exploring the structure of fucosylated chondroitin sulfate through bottom-up nuclear magnetic resonance and electrospray ionization-high-resolution mass spectrometry approaches.

    PubMed

    Santos, Gustavo Rc; Porto, Ana Co; Soares, Paulo Ag; Vilanova, Eduardo; Mourão, Paulo As

    2017-07-01

    Fucosylated chondroitin sulfate (FCS) from sea cucumbers is composed of a chondroitin sulfate (CS) central core and branches of sulfated fucose. The structure of this complex glycosaminoglycan is usually investigated via nuclear magnetic resonance (NMR) analyses of the intact molecule, ergo through a top-down approach, which often yield spectra with intricate sets of signals. Here we employed a bottom-up approach to analyze the FCSs from the sea cucumbers Isostichopus badionotus and Ludwigothurea grisea from their basic constituents, viz. CS cores and sulfated fucose branches, obtained via systematic fragmentation through mild acid hydrolysis. Oligosaccharides derived from the central CS core were analyzed via NMR spectroscopy and the disaccharides produced using chondroitin sulfate lyase via SAX-HPLC. The CS cores from the two species were similar, showing only slight differences in the proportions of 4- or 6-monosulfated and 4,6-disulfated β-d-GalNAc. Sulfated fucose units released from the FCSs were analyzed via NMR and ESI-HRMS spectroscopies. The fucose units from each species presented extensive qualitative differences, but quantitative assessments of these units were hindered, mostly because of their extensive desulfation during the hydrolysis. The bottom-up analysis performed here has proved useful to explore the structure of FCS through a sum-of-the-parts approach in a qualitative manner. We further demonstrate that under specific acidification conditions particular fucose branches can be removed preferentially from FCS. Preparation of derivatives enriched with particular fucose branches could be useful for studies on "structure vs. biological function" of FCS. © The Author 2017. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  4. The effect of exercise mode and intensity of sub-maximal physical activities on salivary testosterone to cortisol ratio and α-amylase in young active males

    PubMed Central

    AZARBAYJANI, MOHAMMAD ALI; FATOLAHI, HOSEYN; RASAEE, MOHAMMAD JAVAD; PEERI, MAGHSOD; BABAEI, ROHOLAH

    2011-01-01

    We examined the effect of exercise intensity and mode on the acute responses of free testosterone to cortisol ratio and salivary α-amylase. We also evaluated the relationship between cortisol and salivary α-amylase. Ten healthy young active males participated voluntarily in this study in six single sessions. They exercised on a cycle ergo meter, treadmill, and elliptical instrument at intensities of 70% and 85% maximum heart rate for 25 minutes. Saliva samples were collected 5 minutes before and 5 minutes after each exercise session. No significant changes were observed for cortisol. Free testosterone to cortisol ratio increased during each exercise session (F5, 45=3.15, P=0.02). However, these changes are only significant after exercise on the treadmill at 70% maximum heart rate (t=2.94, P=0.02) and 85% maximum heart rate (t=0.53, P=0.03). Salivary α-amylase significantly varied among exercise sessions (F5, 45=3.97, P=0.005), and a significant decline was observed after exercise on the elliptical instrument (t=2.38, P=0.04) and treadmill (t=3.55, P=0.006) at 85% maximum heart rate. We found that the free testosterone to cortisol ratio is dependent on the exercise mode, while the salivary α-amylase response is dependent on the intensity of exercise. The increase of free testosterone to cortisol ratio in this study may indicate lower physiological stress in response to performing these exercises. Applying muscular strength with moderate intensity weight-bearing exercises possibly activates the anabolic pathways. Although the cortisol and salivary α-amylase responses were opposite in the majority of the exercise sessions, no significant inverse relationship was observed. PMID:27182369

  5. The effect of exercise mode and intensity of sub-maximal physical activities on salivary testosterone to cortisol ratio and α-amylase in young active males.

    PubMed

    Azarbayjani, Mohammad Ali; Fatolahi, Hoseyn; Rasaee, Mohammad Javad; Peeri, Maghsod; Babaei, Roholah

    We examined the effect of exercise intensity and mode on the acute responses of free testosterone to cortisol ratio and salivary α-amylase. We also evaluated the relationship between cortisol and salivary α-amylase. Ten healthy young active males participated voluntarily in this study in six single sessions. They exercised on a cycle ergo meter, treadmill, and elliptical instrument at intensities of 70% and 85% maximum heart rate for 25 minutes. Saliva samples were collected 5 minutes before and 5 minutes after each exercise session. No significant changes were observed for cortisol. Free testosterone to cortisol ratio increased during each exercise session (F 5, 45 =3.15, P=0.02) . However, these changes are only significant after exercise on the treadmill at 70% maximum heart rate ( t=2.94, P=0.02 ) and 85% maximum heart rate ( t=0.53, P=0.03 ). Salivary α-amylase significantly varied among exercise sessions (F 5, 45 =3.97, P=0.005), and a significant decline was observed after exercise on the elliptical instrument (t=2.38, P=0.04) and treadmill ( t=3.55, P=0.006 ) at 85% maximum heart rate. We found that the free testosterone to cortisol ratio is dependent on the exercise mode, while the salivary α-amylase response is dependent on the intensity of exercise. The increase of free testosterone to cortisol ratio in this study may indicate lower physiological stress in response to performing these exercises. Applying muscular strength with moderate intensity weight-bearing exercises possibly activates the anabolic pathways. Although the cortisol and salivary α-amylase responses were opposite in the majority of the exercise sessions, no significant inverse relationship was observed.

  6. The Caenorhabditis elegans RDE-10/RDE-11 complex regulates RNAi by promoting secondary siRNA amplification

    PubMed Central

    Zhang, Chi; Montgomery, Taiowa A.; Fischer, Sylvia E. J.; Garcia, Susana M. D. A.; Riedel, Christian G.; Fahlgren, Noah; Sullivan, Christopher M.; Carrington, James C.; Ruvkun, Gary

    2012-01-01

    SUMMARY Background In nematodes, plants and fungi, RNAi is remarkably potent and persistent due to the amplification of initial silencing signals by RNA-dependent RNA polymerases (RdRPs). In Caenorhabditis elegans (C. elegans), the interaction between the RNA-induced silencing complex (RISC) loaded with primary siRNAs and the target mRNA leads to the recruitment of RdRPs and synthesis of secondary siRNAs using the target mRNA as the template. The mechanism and genetic requirements for secondary siRNA accumulation are not well understood. Results From a forward genetic screen for C. elegans genes required for RNAi, we identified rde-10 and through proteomic analysis of RDE-10-interacting proteins, we identified a protein complex containing the new RNAi factor RDE-11, the known RNAi factors RSD-2 and ERGO-1, as well as other candidate RNAi factors. The RNAi defective genes rde-10 and rde-11 encode a novel protein and a RING-type zinc finger domain protein, respectively. Mutations in rde-10 and rde-11 genes cause dosage-sensitive RNAi deficiencies: these mutants are resistant to low dosage, but sensitive to high dosage of double-stranded RNAs (dsRNAs). We assessed the roles of rde-10, rde-11, and other dosage-sensitive RNAi-defective genes rsd-2, rsd-6 and haf-6 in both exogenous and endogenous small RNA pathways using high-throughput sequencing and qRT-PCR. These genes are required for the accumulation of secondary siRNAs in both exogenous and endogenous RNAi pathways. Conclusions The RDE-10/RDE-11 complex is essential for the amplification of RNAi in C. elegans by promoting secondary siRNA accumulation. PMID:22542102

  7. Restricted Inter-ocean Exchange and Attenuated Biological Export Caused Enhanced Carbonate Preservation in the PETM Ocean

    NASA Astrophysics Data System (ADS)

    Luo, Y.; Boudreau, B. P.; Dickens, G. R.; Sluijs, A.; Middelburg, J. J.

    2015-12-01

    Carbon dioxide (CO2) release during the Paleocene-Eocene Thermal Maximum (PETM, 55.8 Myr BP) acidified the oceans, causing a decrease in calcium carbonate (CaCO3) preservation. During the subsequent recovery from this acidification, the sediment CaCO3 content came to exceed pre-PETM values, known as over-deepening or over-shooting. Past studies claim to explain these trends, but have failed to reproduce quantitatively the time series of CaCO3 preservation. We employ a simple biogeochemical model to recreate the CaCO3 records preserved at Walvis Ridge of the Atlantic Ocean. Replication of the observed changes, both shallowing and the subsequent over-deepening, requires two conditions not previously considered: (1) limited deep-water exchange between the Indo-Atlantic and Pacific oceans and (2) a ~50% reduction in the export of CaCO3 to the deep sea during acidification. Contrary to past theories that attributed over-deepening to increased riverine alkalinity input, we find that over-deepening is an emergent property, generated at constant riverine input when attenuation of CaCO3 export causes an unbalanced alkalinity input to the deep oceans (alkalinization) and the development of deep super-saturation. Restoration of CaCO3 export, particularly in the super-saturated deep Indo-Atlantic ocean, later in the PETM leads to greater accumulation of carbonates, ergo over-shooting, which returns the ocean to pre-PETM conditions over a time scale greater than 200 kyr. While this feedback between carbonate export and the riverine input has not previously been considered, it appears to constitute an important modification of the classic carbonate compensation concept used to explain oceanic response to acidification.

  8. An alternative model for CaCO3 over-shooting during the PETM: Biological carbonate compensation

    NASA Astrophysics Data System (ADS)

    Luo, Yiming; Boudreau, Bernard P.; Dickens, Gerald R.; Sluijs, Appy; Middelburg, Jack J.

    2016-11-01

    Decreased CaCO3 content of deep-sea sediments argues for rapid and massive acidification of the oceans during the Paleocene-Eocene Thermal Maximum (PETM, ∼56 Ma BP). In the course of the subsequent recovery from this acidification, sediment CaCO3 content came to exceed pre-PETM levels, known as over-shooting. Past studies have largely attributed the latter to increased alkalinity input to the oceans via enhanced weathering, but this ignores potentially important biological factors. We successfully reproduce the CaCO3 records from Walvis Ridge in the Atlantic Ocean, including over-shooting, using a biogeochemical box model. Replication of the CaCO3 records required: 1) introduction of a maximum of ∼6500 GtC of CO2 directly into deep-ocean waters or ∼8000 GtC into the atmosphere, 2) limited deep-water exchange between the Indo-Atlantic and Pacific oceans, 3) the disappearance of sediment bioturbation during a portion of the PETM, and 4) most central to this study, a ∼50% reduction in net CaCO3 production, during acidification. In our simulations, over-shooting is an emergent property, generated at constant alkalinity input (no weathering feedback) as a consequence of attenuated CaCO3 productivity. This occurs because lower net CaCO3 production from surface waters allows alkalinity to build-up in the deep oceans (alkalinization), thus promoting deep-water super-saturation. Restoration of CaCO3 productivity later in the PETM, particularly in the Indo-Atlantic Ocean, leads to greater accumulation of CaCO3, ergo over-shooting, which returns the ocean to pre-PETM conditions over a time scale greater than 200 ka.

  9. Dataset for an analysis of communicative aspects of finance.

    PubMed

    Natalya Zavyalova

    2017-04-01

    The article describes a step-by-step strategy for designing a universal comprehensive vision of a vast majority of financial research topics. The strategy is focused around the analysis of the retrieval results of the word processing system Serelex which is based on the semantic similarity measure. While designing a research topic, scientists usually employ their individual background. They rely in most cases on their individual assumptions and hypotheses. The strategy, introduced in the article, highlights the method of identifying components of semantic maps which can lead to a better coverage of any scientific topic under analysis. On the example of the research field of finance we show the practical and theoretical value of semantic similarity measurements, i.e., a better coverage of the problems which might be included in the scientific analysis of financial field. At the designing stage of any research scientists are not immune to an insufficient and, thus, erroneous spectrum of problems under analysis. According to the famous maxima of St. Augustine, 'Fallor ergo sum', the researchers' activities are driven along the way from one mistake to another. However, this might not be the case for the 21st century science approach. Our strategy offers an innovative methodology, according to which the number of mistakes at the initial stage of any research may be significantly reduced. The data, obtained, was used in two articles (N. Zavyalova, 2017) [7], (N. Zavyalova, 2015) [8]. The second stage of our experiment was driven towards analyzing the correlation between the language and income level of the respondents. The article contains the information about data processing.

  10. The type of mat (Contact vs. Photocell) affects vertical jump height estimated from flight time.

    PubMed

    García-López, Juan; Morante, Juan C; Ogueta-Alday, Ana; Rodríguez-Marroyo, Jose A

    2013-04-01

    The purposes of this study were to analyze the validity and reliability of 2 photocell mats and to probe the possible influence of the type of mat (contact vs. photocell) on vertical jump height estimated from flight time. In 2 separate studies, 89 and 92 physical students performed 3 countermovement jumps that were simultaneously registered by a Force Plate (gold standard method), 2 photocell mats (SportJump System Pro and ErgoJump Plus), and a contact mat (SportJump-v1.0). The first study showed that the 2 photocell mats underestimated the vertical jump height (1.3 ± 0.2 cm and 5.9 ± 5.2 cm, respectively), but only SportJump System Pro showed a high correlation with the Force Plate (r = 0.999 and 0.676, respectively) and good intraday reliability (coefficient of variation = 2.98 and 15.94%, intraclass correlation coefficients = 0.95-0.97 and 0.45-0.57, respectively). The second study demonstrated a strong correlation (r = 0.994) between the 2 technologies (contact vs. photocell mats) with differences in vertical jump height of 2.0 ± 0.8 cm (95% confidence interval = 1.9-2.1 cm), which depended on both flight time and subjects' body mass. In conclusion, SportJump System Pro was a valid and reliable device. The new devices to measure vertical jump height from flight time should be validated. The type of mat (contact vs. photocell) affected approximately 6% the vertical jump height (approximately 2 cm in this study), which should be considered in further studies. The use of validated photocell mats instead of the contact mats was recommended.

  11. Analysis of a risk prevention document using dependability techniques: a first step towards an effectiveness model

    NASA Astrophysics Data System (ADS)

    Ferrer, Laetitia; Curt, Corinne; Tacnet, Jean-Marc

    2018-04-01

    Major hazard prevention is a main challenge given that it is specifically based on information communicated to the public. In France, preventive information is notably provided by way of local regulatory documents. Unfortunately, the law requires only few specifications concerning their content; therefore one can question the impact on the general population relative to the way the document is concretely created. Ergo, the purpose of our work is to propose an analytical methodology to evaluate preventive risk communication document effectiveness. The methodology is based on dependability approaches and is applied in this paper to the Document d'Information Communal sur les Risques Majeurs (DICRIM; in English, Municipal Information Document on Major Risks). DICRIM has to be made by mayors and addressed to the public to provide information on major hazards affecting their municipalities. An analysis of law compliance of the document is carried out thanks to the identification of regulatory detection elements. These are applied to a database of 30 DICRIMs. This analysis leads to a discussion on points such as usefulness of the missing elements. External and internal function analysis permits the identification of the form and content requirements and service and technical functions of the document and its components (here its sections). Their results are used to carry out an FMEA (failure modes and effects analysis), which allows us to define the failure and to identify detection elements. This permits the evaluation of the effectiveness of form and content of each components of the document. The outputs are validated by experts from the different fields investigated. Those results are obtained to build, in future works, a decision support model for the municipality (or specialised consulting firms) in charge of drawing up documents.

  12. Pedagogical tools to explore Cartesian mind-body dualism in the classroom: philosophical arguments and neuroscience illusions.

    PubMed

    Hamilton, Scott; Hamilton, Trevor J

    2015-01-01

    A fundamental discussion in lower-level undergraduate neuroscience and psychology courses is Descartes's "radical" or "mind-body" dualism. According to Descartes, our thinking mind, the res cogitans, is separate from the body as physical matter or substance, the res extensa. Since the transmission of sensory stimuli from the body to the mind is a physical capacity shared with animals, it can be confused, misled, or uncertain (e.g., bodily senses imply that ice and water are different substances). True certainty thus arises from within the mind and its capacity to doubt physical stimuli. Since this doubting mind is a thinking thing that is distinct from bodily stimuli, truth and certainty are reached through the doubting mind as cogito ergo sum, or the certainty of itself as it thinks: hence Descartes's famous maxim, I think, therefore I am. However, in the last century of Western philosophy, with nervous system investigation, and with recent advances in neuroscience, the potential avenues to explore student's understanding of the epistemology and effects of Cartesian mind-body dualism has expanded. This article further explores this expansion, highlighting pedagogical practices and tools instructors can use to enhance a psychology student's understanding of Cartesian dualistic epistemology, in order to think more critically about its implicit assumptions and effects on learning. It does so in two ways: first, by offering instructors an alternative philosophical perspective to dualistic thinking: a mind-body holism that is antithetical to the assumed binaries of dualistic epistemology. Second, it supplements this philosophical argument with a practical component: simple mind-body illusions that instructors may use to demonstrate contrary epistemologies to students. Combining these short philosophical and neuroscience arguments thereby acts as a pedagogical tool to open new conceptual spaces within which learning may occur.

  13. EFFECTS OF WHOLE BODY VIBRATION ON STRENGTH AND JUMPING PERFORMANCE IN VOLLEYBALL AND BEACH VOLLEYBALL PLAYERS

    PubMed Central

    Zmijewski, P.; Jimenez-Olmedo, J.M.; Jové-Tossi, M.A.; Martínez-Carbonell, A.; Suárez-Llorca, C.; Andreu-Cabrera, E.

    2014-01-01

    The primary aim of this study was to examine the effects of 6-week strength training with whole body vibration (WBV) on leg strength and jumping performance in volleyball and beach volleyball players. Twenty-three sub-elite male volleyball (VB; n=12) and beach volleyball players (BVB; n=11) aged 21.2±3.0 years were divided into two groups and subjected to 6 weeks of strength training (three one-hour sessions per week): (I) 12 players (6 VB and 6 BVB players) underwent training with WBV (30-40 Hz, 1.7-2.5 mm, 3.0-5.7 g), and (II) 11 players (6 VB and 5 BVB players) underwent traditional strength training. Squat jump (SJ) and countermovement squat jump (CMJ) measurements by the Ergo Tester contact platform and maximum leg press test (1RM) were conducted. Three-factor (2 time x 2 WBV use x 2 discipline) analysis of variance for SJ, CMJ and 1RM revealed a significant time main effect (p<0.001), a WBV use effect (p<0.001) and a discipline effect (p<0.001). Significantly greater improvements in the SJ (p<0.001) and CMJ (p<0.001) and in 1RM (p<0.001) were found in the WBV training groups than in traditional training groups. Significant 3-way interaction effects (training, WBV use, discipline kind) were also found for SJ, CMJ and 1RM (p=0.001, p<0.001, p=0.001, respectively). It can be concluded that implementation of 6-week WBV training in routine practice in volleyball and beach volleyball players increases leg strength more and leads to greater improvement in jump performance than traditional strength training, but greater improvements can be expected in beach volleyball players than in volleyball players. PMID:25187676

  14. Pedagogical tools to explore Cartesian mind-body dualism in the classroom: philosophical arguments and neuroscience illusions

    PubMed Central

    Hamilton, Scott; Hamilton, Trevor J.

    2015-01-01

    A fundamental discussion in lower-level undergraduate neuroscience and psychology courses is Descartes’s “radical” or “mind-body” dualism. According to Descartes, our thinking mind, the res cogitans, is separate from the body as physical matter or substance, the res extensa. Since the transmission of sensory stimuli from the body to the mind is a physical capacity shared with animals, it can be confused, misled, or uncertain (e.g., bodily senses imply that ice and water are different substances). True certainty thus arises from within the mind and its capacity to doubt physical stimuli. Since this doubting mind is a thinking thing that is distinct from bodily stimuli, truth and certainty are reached through the doubting mind as cogito ergo sum, or the certainty of itself as it thinks: hence Descartes’s famous maxim, I think, therefore I am. However, in the last century of Western philosophy, with nervous system investigation, and with recent advances in neuroscience, the potential avenues to explore student’s understanding of the epistemology and effects of Cartesian mind-body dualism has expanded. This article further explores this expansion, highlighting pedagogical practices and tools instructors can use to enhance a psychology student’s understanding of Cartesian dualistic epistemology, in order to think more critically about its implicit assumptions and effects on learning. It does so in two ways: first, by offering instructors an alternative philosophical perspective to dualistic thinking: a mind-body holism that is antithetical to the assumed binaries of dualistic epistemology. Second, it supplements this philosophical argument with a practical component: simple mind-body illusions that instructors may use to demonstrate contrary epistemologies to students. Combining these short philosophical and neuroscience arguments thereby acts as a pedagogical tool to open new conceptual spaces within which learning may occur. PMID:26321981

  15. Scanning electrochemical microscopy of graphene/polymer hybrid thin films as supercapacitors: Physical-chemical interfacial processes

    NASA Astrophysics Data System (ADS)

    Gupta, Sanju; Price, Carson

    2015-10-01

    Hybrid electrode comprising an electric double-layer capacitor of graphene nanosheets and a pseudocapacitor of the electrically conducting polymers namely, polyaniline; PAni and polypyrrole; PPy are constructed that exhibited synergistic effect with excellent electrochemical performance as thin film supercapacitors for alternative energy. The hybrid supercapacitors were prepared by layer-by-layer (LbL) assembly based on controlled electrochemical polymerization followed by reduction of graphene oxide electrochemically producing ErGO, for establishing intimate electronic contact through nanoscale architecture and chemical stability, producing a single bilayer of (PAni/ErGO)1, (PPy/ErGO)1, (PAni/GO)1 and (PPy/GO)1. The rationale design is to create thin films that possess interconnected graphene nanosheets (GNS) with polymer nanostructures forming well-defined tailored interfaces allowing sufficient surface adsorption and faster ion transport due to short diffusion distances. We investigated their electrochemical properties and performance in terms of gravimetric specific capacitance, Cs, from cyclic voltammograms. The LbL-assembled bilayer films exhibited an excellent Cs of ≥350 F g-1 as compared with constituents (˜70 F g-1) at discharge current density of 0.3 A g-1 that outperformed many other hybrid supercapacitors. To gain deeper insights into the physical-chemical interfacial processes occurring at the electrode/electrolyte interface that govern their operation, we have used scanning electrochemical microscopy (SECM) technique in feedback and probe approach modes. We present our findings from viewpoint of reinforcing the role played by heterogeneous electrode surface composed of nanoscale graphene sheets (conducting) and conducting polymers (semiconducting) backbone with ordered polymer chains via higher/lower probe current distribution maps. Also targeted is SECM imaging that allowed to determine electrochemical (re)activity of surface ion adsorption sites

  16. Genome Sequence and Analysis of the Oral Bacterium Fusobacterium nucleatum Strain ATCC 25586

    PubMed Central

    Kapatral, Vinayak; Anderson, Iain; Ivanova, Natalia; Reznik, Gary; Los, Tamara; Lykidis, Athanasios; Bhattacharyya, Anamitra; Bartman, Allen; Gardner, Warren; Grechkin, Galina; Zhu, Lihua; Vasieva, Olga; Chu, Lien; Kogan, Yakov; Chaga, Oleg; Goltsman, Eugene; Bernal, Axel; Larsen, Niels; D'Souza, Mark; Walunas, Theresa; Pusch, Gordon; Haselkorn, Robert; Fonstein, Michael; Kyrpides, Nikos; Overbeek, Ross

    2002-01-01

    We present a complete DNA sequence and metabolic analysis of the dominant oral bacterium Fusobacterium nucleatum. Although not considered a major dental pathogen on its own, this anaerobe facilitates the aggregation and establishment of several other species including the dental pathogens Porphyromonas gingivalis and Bacteroides forsythus. The F. nucleatum strain ATCC 25586 genome was assembled from shotgun sequences and analyzed using the ERGO bioinformatics suite (http://www.integratedgenomics.com). The genome contains 2.17 Mb encoding 2,067 open reading frames, organized on a single circular chromosome with 27% GC content. Despite its taxonomic position among the gram-negative bacteria, several features of its core metabolism are similar to that of gram-positive Clostridium spp., Enterococcus spp., and Lactococcus spp. The genome analysis has revealed several key aspects of the pathways of organic acid, amino acid, carbohydrate, and lipid metabolism. Nine very-high-molecular-weight outer membrane proteins are predicted from the sequence, none of which has been reported in the literature. More than 137 transporters for the uptake of a variety of substrates such as peptides, sugars, metal ions, and cofactors have been identified. Biosynthetic pathways exist for only three amino acids: glutamate, aspartate, and asparagine. The remaining amino acids are imported as such or as di- or oligopeptides that are subsequently degraded in the cytoplasm. A principal source of energy appears to be the fermentation of glutamate to butyrate. Additionally, desulfuration of cysteine and methionine yields ammonia, H2S, methyl mercaptan, and butyrate, which are capable of arresting fibroblast growth, thus preventing wound healing and aiding penetration of the gingival epithelium. The metabolic capabilities of F. nucleatum revealed by its genome are therefore consistent with its specialized niche in the mouth. PMID:11889109

  17. Scanning electrochemical microscopy of graphene/polymer hybrid thin films as supercapacitors: Physical-chemical interfacial processes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gupta, Sanju, E-mail: sanju.gupta@wku.edu; Price, Carson

    2015-10-15

    Hybrid electrode comprising an electric double-layer capacitor of graphene nanosheets and a pseudocapacitor of the electrically conducting polymers namely, polyaniline; PAni and polypyrrole; PPy are constructed that exhibited synergistic effect with excellent electrochemical performance as thin film supercapacitors for alternative energy. The hybrid supercapacitors were prepared by layer-by-layer (LbL) assembly based on controlled electrochemical polymerization followed by reduction of graphene oxide electrochemically producing ErGO, for establishing intimate electronic contact through nanoscale architecture and chemical stability, producing a single bilayer of (PAni/ErGO){sub 1}, (PPy/ErGO){sub 1}, (PAni/GO){sub 1} and (PPy/GO){sub 1}. The rationale design is to create thin films that possess interconnectedmore » graphene nanosheets (GNS) with polymer nanostructures forming well-defined tailored interfaces allowing sufficient surface adsorption and faster ion transport due to short diffusion distances. We investigated their electrochemical properties and performance in terms of gravimetric specific capacitance, C{sub s}, from cyclic voltammograms. The LbL-assembled bilayer films exhibited an excellent C{sub s} of ≥350 F g{sup −1} as compared with constituents (∼70 F g{sup −1}) at discharge current density of 0.3 A g{sup −1} that outperformed many other hybrid supercapacitors. To gain deeper insights into the physical-chemical interfacial processes occurring at the electrode/electrolyte interface that govern their operation, we have used scanning electrochemical microscopy (SECM) technique in feedback and probe approach modes. We present our findings from viewpoint of reinforcing the role played by heterogeneous electrode surface composed of nanoscale graphene sheets (conducting) and conducting polymers (semiconducting) backbone with ordered polymer chains via higher/lower probe current distribution maps. Also targeted is SECM imaging that allowed to

  18. SU-G-TeP2-12: IROCHouston and MDAPL SRS Anthropomorphic Phantom Results

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Molineu, A; Kry, S; Alvarez, P

    Purpose: To report the results of SRS phantom irradiations Methods: Anthropomorphic SRS head phantoms were sent to institutions participating in NCI sponsored SRS clinical trials and institutions interested in verifying SRS treatment delivery. The phantom shell was purchased from Phantom Laboratory and altered to house dosimetry and imaging inserts. The imaging insert has 1.9 cm diameter spherical target. The dosimetry insert holds two TLD capsules and radiochromic film in the coronal and sagittal planes through the center of the target. Institutions were asked to image, plan and treat the phantom as they would an SRS patient. GammaKnife, CyberKnife and c-armmore » accelerator institutions were asked to cover the target with 15 Gy, 20 Gy and 25 Gy, respectively. Following these guidelines and typical planning protocols for these three types of machines gives roughly 30 Gy to the center of the target for all units. Submission of the DICOM digital data set was required for analysis. Criteria of 5% for TLD results and 85% of pixels passing 5%/3mm gamma analysis were applied beginning in 2013. Results: The phantom was analyzed 269 times between the beginning of 2013 to present. The pass rate is 81%. Nineteen of the irradiation results failed only the TLD criteria, 19 failed only the film criteria and 12 failed both. Irradiations included 32 CyberKnife 23 GammaKnife, 3 TomoTherapy and 211 c-arm units. Planning systems included Eclipse, Ergo, GammaPlan, Hi-Art, iPlan, Monaco, MultiPlan, Pinnacle, RayStation, XiO and XKnife. Irradiations that were not accompanied with DICOM data were not included in this analysis. Conclusion: The phantom is a valuable end-to-end test used to independently verify the accuracy of SRS treatment delivery. This investigation was supported by IROC grant CA180803 awarded by the NCI.« less

  19. The Hydrological Response of Snowmelt Dominated Catchments to Climate Change

    NASA Astrophysics Data System (ADS)

    Arrigoni, A. S.; Moore, J. N.

    2007-12-01

    Hydrological systems dominated by snowmelt discharge contribute greater than half the freshwater resource available to the western United States. Globally, the contribution of mountain discharge to total runoff is twice the expected for their geographical coverage. Therefore, snowmelt dominated mountain catchments have proportionally a more prominent role than other systems to our freshwater resource. A changing climate, or even a more variable climate, could have a significant impact on these systems, and consequently on our freshwater resource. Ergo, a better understanding of how changes and variations in climate will influence mountain catchments is a necessity for improving future water management under predicted/proposed climate change. The research presented here is a first order analysis to improve our understanding of these systems by monitoring and analyzing high mountain catchments along the entirety of the Mission Mountain Front, Montana USA. The Mission Mountain Range is an ideal location for conducting this research as it runs directly north to south with elevations progressively increasing from 7600 feet in the northern section, to over 9700 feet at the southern end. The lower elevation catchments will be used as surrogates for variable climate change, while the high elevation catchments will be used as surrogates for a more stable, cooler, climate regime. We use a combination of USGS and Tribal stream gauges, as well as stage gauge loggers in the headwaters of the catchments, SNOTEL datasets, and weather station datasets. This information is used to determine if, how, and why the snowmelt hydrographs vary between catchments, within the catchments between the upper and lower segments, and the dominant driver or drivers of the hydrograph form in relation to changing climatic variables such as temperature and precipitation. This research will improve current comprehension of how mountain catchments respond to climatic variables, and additionally will

  20. CEO stabilization of a femtosecond laser using a SESAM as fast opto-optical modulator.

    PubMed

    Hoffmann, Martin; Schilt, Stéphane; Südmeyer, Thomas

    2013-12-02

    We present a new method for intra-cavity control of the carrier-envelope offset (CEO) frequency of ultrafast lasers that combines high feedback bandwidth with low loss, low nonlinearity, and low dispersion. A semiconductor saturable-absorber mirror (SESAM) inside a modelocked laser is optically pumped with a continuous-wave (cw) laser. In this way, the SESAM acts as intra-cavity opto-optical modulator (OOM): the optical power of the cw-laser corresponds to a high-bandwidth modulation channel for CEO frequency control. We experimentally verified this method for a femtosecond Er:Yb:glass oscillator (ERGO), in which one SESAM is in parallel used for modelocking and as intra-cavity OOM for achieving a tight CEO lock. This laser can also be CEO-stabilized in the usual scheme, in which the laser pump current is modulated, i.e., the gain element acts as intra-cavity OOM. We compare the performance with gain and SESAM OOM measuring CEO transfer function, frequency noise power spectral density (PSD), and Allan deviation for integration times up to 1000 s. In the case of the gain OOM, the millisecond upper-state lifetime of the Er:Yb:glass limits the achievable CEO-control bandwidth to <10 kHz. The feedback bandwidth of the SESAM OOM was more than a factor of 10 higher than the gain OOM bandwidth and was mainly limited by the used current driver. The residual integrated phase noise (1 Hz - 100 kHz) of the ~20-MHz CEO beat was improved by more than an order of magnitude (from 720 mrad to less than 65 mrad), and the fractional frequency stability by a factor of 4 (from 1∙10

  1. Personalised long-term follow-up of cochlear implant patients using remote care, compared with those on the standard care pathway: study protocol for a feasibility randomised controlled trial

    PubMed Central

    Kitterick, Padraig; DeBold, Lisa; Weal, Mark; Clarke, Nicholas; Newberry, Eva; Aubert, Lisa

    2016-01-01

    Introduction Many resources are required to provide postoperative care to patients who receive a cochlear implant. The implant service commits to lifetime follow-up. The patient commits to regular adjustment and rehabilitation appointments in the first year and annual follow-up appointments thereafter. Offering remote follow-up may result in more stable hearing, reduced patient travel expense, time and disruption, more empowered patients, greater equality in service delivery and more freedom to optimise the allocation of clinic resources. Methods and analysis This will be a two-arm feasibility randomised controlled trial (RCT) involving 60 adults using cochlear implants with at least 6 months device experience in a 6-month clinical trial of remote care. This project will design, implement and evaluate a person-centred long-term follow-up pathway for people using cochlear implants offering a triple approach of remote and self-monitoring, self-adjustment of device and a personalised online support tool for home speech recognition testing, information, self-rehabilitation, advice, equipment training and troubleshooting. The main outcome measure is patient activation. Secondary outcomes are stability and quality of hearing, stability of quality of life, clinic resources, patient and clinician experience, and any adverse events associated with remote care. We will examine the acceptability of remote care to service users and clinicians, the willingness of participants to be randomised, and attrition rates. We will estimate numbers required to plan a fully powered RCT. Ethics and dissemination Ethical approval was received from North West—Greater Manchester South Research Ethics Committee (15/NW/0860) and the University of Southampton Research Governance Office (ERGO 15329). Results Results will be disseminated in the clinical and scientific communities and also to the patient population via peer-reviewed research publications both online and in print, conference and

  2. Personalised long-term follow-up of cochlear implant patients using remote care, compared with those on the standard care pathway: study protocol for a feasibility randomised controlled trial.

    PubMed

    Cullington, Helen; Kitterick, Padraig; DeBold, Lisa; Weal, Mark; Clarke, Nicholas; Newberry, Eva; Aubert, Lisa

    2016-05-13

    Many resources are required to provide postoperative care to patients who receive a cochlear implant. The implant service commits to lifetime follow-up. The patient commits to regular adjustment and rehabilitation appointments in the first year and annual follow-up appointments thereafter. Offering remote follow-up may result in more stable hearing, reduced patient travel expense, time and disruption, more empowered patients, greater equality in service delivery and more freedom to optimise the allocation of clinic resources. This will be a two-arm feasibility randomised controlled trial (RCT) involving 60 adults using cochlear implants with at least 6 months device experience in a 6-month clinical trial of remote care. This project will design, implement and evaluate a person-centred long-term follow-up pathway for people using cochlear implants offering a triple approach of remote and self-monitoring, self-adjustment of device and a personalised online support tool for home speech recognition testing, information, self-rehabilitation, advice, equipment training and troubleshooting. The main outcome measure is patient activation. Secondary outcomes are stability and quality of hearing, stability of quality of life, clinic resources, patient and clinician experience, and any adverse events associated with remote care. We will examine the acceptability of remote care to service users and clinicians, the willingness of participants to be randomised, and attrition rates. We will estimate numbers required to plan a fully powered RCT. Ethical approval was received from North West-Greater Manchester South Research Ethics Committee (15/NW/0860) and the University of Southampton Research Governance Office (ERGO 15329). Results will be disseminated in the clinical and scientific communities and also to the patient population via peer-reviewed research publications both online and in print, conference and meeting presentations, posters, newsletter articles, website reports

  3. Comparison of the shaping ability of GT® Series X, Twisted Files and AlphaKite rotary nickel-titanium systems in simulated canals

    PubMed Central

    2013-01-01

    Background Efforts to improve the performance of rotary NiTi instruments by enhancing the properties of NiTi alloy, or their manufacturing processes rather than changes in instrument geometries have been reported. The aim of this study was to compare in-vitro the shaping ability of three different rotary nickel-titanium instruments produced by different manufacturing methods. Methods Thirty simulated root canals with a curvature of 35˚ in resin blocks were prepared with three different rotary NiTi systems: AK- AlphaKite (Gebr. Brasseler, Germany), GTX- GT® Series X (Dentsply, Germany) and TF- Twisted Files (SybronEndo, USA). The canals were prepared according to the manufacturers’ instructions. Pre- and post-instrumentation images were recorded and assessment of canal curvature modifications was carried out with an image analysis program (GSA, Germany). The preparation time and incidence of procedural errors were recorded. Instruments were evaluated under a microscope with 15 × magnifications (Carl Zeiss OPMI Pro Ergo, Germany) for signs of deformation. The Data were statistically analyzed using SPSS (Wilcoxon and Mann–Whitney U-tests, at a confidence interval of 95%). Results Less canal transportation was produced by TF apically, although the difference among the groups was not statistically significant. GTX removed the greatest amount of resin from the middle and coronal parts of the canal and the difference among the groups was statistically significant (p < 0.05). The shortest preparation time was registered with TF (444 s) and the longest with GTX (714 s), the difference among the groups was statistically significant (p < 0.05). During the preparation of the canals no instrument fractured. Eleven instruments of TF and one of AK were deformed. Conclusion Under the conditions of this study, all rotary NiTi instruments maintained the working length and prepared a well-shaped root canal. The least canal transportation was produced by AK. GTX

  4. Efficient Geological Modelling of Large AEM Surveys

    NASA Astrophysics Data System (ADS)

    Bach, Torben; Martlev Pallesen, Tom; Jørgensen, Flemming; Lundh Gulbrandsen, Mats; Mejer Hansen, Thomas

    2014-05-01

    Combining geological expert knowledge with geophysical observations into a final 3D geological model is, in most cases, not a straight forward process. It typically involves many types of data and requires both an understanding of the data and the geological target. When dealing with very large areas, such as modelling of large AEM surveys, the manual task for the geologist to correctly evaluate and properly utilise all the data available in the survey area, becomes overwhelming. In the ERGO project (Efficient High-Resolution Geological Modelling) we address these issues and propose a new modelling methodology enabling fast and consistent modelling of very large areas. The vision of the project is to build a user friendly expert system that enables the combination of very large amounts of geological and geophysical data with geological expert knowledge. This is done in an "auto-pilot" type functionality, named Smart Interpretation, designed to aid the geologist in the interpretation process. The core of the expert system is a statistical model that describes the relation between data and geological interpretation made by a geological expert. This facilitates fast and consistent modelling of very large areas. It will enable the construction of models with high resolution as the system will "learn" the geology of an area directly from interpretations made by a geological expert, and instantly apply it to all hard data in the survey area, ensuring the utilisation of all the data available in the geological model. Another feature is that the statistical model the system creates for one area can be used in another area with similar data and geology. This feature can be useful as an aid to an untrained geologist to build a geological model, guided by the experienced geologist way of interpretation, as quantified by the expert system in the core statistical model. In this project presentation we provide some examples of the problems we are aiming to address in the project

  5. Characterization of Carbopol® hydrogel rheology for experimental tectonics and geodynamics

    NASA Astrophysics Data System (ADS)

    Di Giuseppe, E.; Corbi, F.; Funiciello, F.; Massmeyer, A.; Santimano, T. N.; Rosenau, M.; Davaille, A.

    2015-02-01

    One of the long-standing challenges of modern tectonics and geodynamics is to fully understand the strong strain localization and its effects observed in the lithosphere, which presents viscous, as well as elastic and brittle properties. Recently yield stress-shear thinning hydrogels, such as Carbopol®, have been employed in analog modeling because of its great potential for mimicking the non-Newtonian behavior of rocks. Conversely its use has been limited by the difficulties in assessing its rheology and in preparing uniform samples. Ergo, it is essential to ensure a standard recipe, yielding to a reproducible behavior, no matter which rheometer model is used. We carried out, at four institutions (FAST, GFZ, IPGP and LET), a benchmark for developing a standard preparation and for testing the comparability of results. Then, we conducted a systematical rheological characterization of a wide range of Carbopol® formulas as a function of concentration, composition, pH, temperature and aging. Results show that neutral pH favors higher viscosity. The shear modulus, yield stress, viscosity, and shear thinning behavior increase with concentration. The linear viscoelastic range increases with concentration contrarily to what is observed in gelatins or colloidal suspensions. A weak inverse relationship between temperature and viscosity is found. Similarly, aging reduces both the viscosity and loss modulus, with reduction more evident for low concentration samples. Scaling analysis revealed that low concentration samples, i.e. < 0.1 wt.%, exhibiting shear thinning behavior and low yield stress, are appropriate to model the rising of thermal instabilities. Those at 0.5-1.0 wt.%, showing yield stress in the order of hundreds of Pa and n ranging between 1.6 and 3.4 are good candidates to mimic the non-linear ductile behavior of crustal rocks. We conclude that tuning the visco-elasto-plastic rheology of Carbopol® would make this material a good candidate for modeling of also

  6. Seismic refraction and electrical resistivity tests for fracture induced hydraulic anisotropy in a mountain watershed.

    NASA Astrophysics Data System (ADS)

    Mendieta, A. L.; Bradford, J.; Liberty, L. M.; McNamara, J. P.

    2016-12-01

    Granitic based terrains often have complex hydrogeological systems. It is often assumed that the bedrock is impermeable, unless it is fractured. If the bedrock is fractured this can greatly affect fluid flow, depending on fracture density and orientation. Recently there has been a substantial increase in the number of geophysical studies designed to investigate hydrologic processes in mountain watersheds, however few of these studies have taken fracture induced geophysical and hydraulic anisotropy into consideration. Vertically oriented fractures with a preferred orientation produce azimuthal anisotropy in the electrical resistivity, the seismic primary wave (P-wave) velocity, and the hydraulic permeability. By measuring the electrical and seismic anisotropy we can estimate fracture orientation and density which improves our understanding of hydraulic properties. Despite numerous previous studies of the hydrologic system, the subsurface hydraulic system at the Dry Creek Experimental Watershed (DCEW), located near Boise, Idaho, is not completely understood. This is particularly true of the deep (>5m) system which is difficult to study using conventional hydrologic measurements, particularly in rugged and remote mountain environments. From previous studies, it is hypothesized that there is a system of fractures that may be aligned according to the local stress field. To test for the preferential alignment, ergo the direction of preferential water flow, we collected seismic and electrical resistivity profiles along different azimuths. The preliminary results show an azimuthal dependence of the P-wave velocities in the bedrock, at depths greater than 18 m; P-wave velocities range from 3500 to 4100 m/s, which represents a 17.5 % difference. We interpret this difference to be caused by fractures present in the bedrock. At the same location, we measured an electric resistivity value of 29 ohm-m, and we expect a difference of 37 %, if the fractures are fully saturated

  7. 2500 pyroclast puzzle: probing eruptive scenarios at Volcán de Colima, Mexico

    NASA Astrophysics Data System (ADS)

    Kueppers, U.; Varley, N. R.; Alatorre-Ibarguengoitia, M. A.; Lavallee, Y.; Becker, S.; Berninger, N.; Goldstein, F.; Hanson, J. B.; Kolzenburg, S.; Dingwell, D. B.

    2009-12-01

    Colima. Ergo, the physical properties of eruptive products allow the constraining of eruptive scenarios and may help to better interpret volcanic deposits that have not been eye-witnessed.

  8. Multinational comparative cross-sectional survey of views of medical students about acceptable terminology and subgroups in schizophrenia

    PubMed Central

    Rathod, Shanaya; Irfan, Muhammad; Bhargava, Rachna; Pinninti, Narsimha; Scott, Joseph; Mohammad Algahtani, Haifa; Guo, Zhihua; Gupta, Rishab; Nadkarni, Pallavi; Naeem, Farooq; Howells, Fleur; Sorsdahi, Katherine; Thorne, Kerensa; Osman-Hicks, Victoria; Pallikadavath, Sasee; Phiri, Peter; Carr, Hannah; Graves, Lizi; Kingdon, David

    2018-01-01

    shown mixed results and variation across countries. Further research is warranted to investigate acceptability of terminology. Methods of reducing stigma are discussed in line with the findings. Ethics The study received ethical approval from ERGO (Ethics and Research Governance Online; ID: 15972) and subsequently from the ethics committee at each site. PMID:29880569

  9. Comparison of anatomy-based, fluence-based and aperture-based treatment planning approaches for VMAT

    NASA Astrophysics Data System (ADS)

    Rao, Min; Cao, Daliang; Chen, Fan; Ye, Jinsong; Mehta, Vivek; Wong, Tony; Shepard, David

    2010-11-01

    Volumetric modulated arc therapy (VMAT) has the potential to reduce treatment times while producing comparable or improved dose distributions relative to fixed-field intensity-modulated radiation therapy. In order to take full advantage of the VMAT delivery technique, one must select a robust inverse planning tool. The purpose of this study was to evaluate the effectiveness and efficiency of VMAT planning techniques of three categories: anatomy-based, fluence-based and aperture-based inverse planning. We have compared these techniques in terms of the plan quality, planning efficiency and delivery efficiency. Fourteen patients were selected for this study including six head-and-neck (HN) cases, and two cases each of prostate, pancreas, lung and partial brain. For each case, three VMAT plans were created. The first VMAT plan was generated based on the anatomical geometry. In the Elekta ERGO++ treatment planning system (TPS), segments were generated based on the beam's eye view (BEV) of the target and the organs at risk. The segment shapes were then exported to Pinnacle3 TPS followed by segment weight optimization and final dose calculation. The second VMAT plan was generated by converting optimized fluence maps (calculated by the Pinnacle3 TPS) into deliverable arcs using an in-house arc sequencer. The third VMAT plan was generated using the Pinnacle3 SmartArc IMRT module which is an aperture-based optimization method. All VMAT plans were delivered using an Elekta Synergy linear accelerator and the plan comparisons were made in terms of plan quality and delivery efficiency. The results show that for cases of little or modest complexity such as prostate, pancreas, lung and brain, the anatomy-based approach provides similar target coverage and critical structure sparing, but less conformal dose distributions as compared to the other two approaches. For more complex HN cases, the anatomy-based approach is not able to provide clinically acceptable VMAT plans while highly

  10. Reliability of Tin Silver Copper and mixed solders under variable loading conditions

    NASA Astrophysics Data System (ADS)

    Jaradat, Younis

    Industry use of lead free solder joints necessitates accurate modeling in predicting life in service. Yet, current extrapolations of accelerated test results do not actuate realistic conditions. This research focuses on joint properties of Pb-mixed and Pb-free solder alloys in order to explain material behavior subject to certain test conditions, i.e., varying cycling amplitudes. Additionally, this research will begin with extensive studies on backward compatible solder joints from the material's behavior to its reliability under displacement and load controlled fatigue tests. We address the evolution of the joint's microstructure ergo its properties and performance (mixed solder joints). The present work reports results of reflowing 30 mil SAC305 balls onto Cu, and ENIG coated BGA pads with different amounts of SnPb paste, aging and/or cycling the joints and inspecting the microstructure by cross polarizer microscopy and SEM. We found that the addition of small amounts of Pb had significant effects on solidification during cool-down from reflow, and consequently the initial microstructure. In terms of the varying cycling amplitude study, we note how realistic service conditions are almost never well approximated by cycling with fixed amplitudes. Recent results have demonstrated the consistent breakdown of common damage accumulation rules. In isothermal cycling tests the remaining life, after a step-down in amplitude, was invariably shorter than predicted by such a rule, while a step-up tended to have the opposite effect. The present work offers a mechanistic explanation for this and the basis for a practical approach to the assessment of life under service conditions. Realistic BGA joints were cycled individually in a micromechanical tester, monitoring the solder stiffness and the inelastic energy deposition. Cycling was seen to first cause rapid hardening, followed by leveling off in a 'cyclic saturation' stage and eventually the initiation and growth of a crack

  11. Multinational comparative cross-sectional survey of views of medical students about acceptable terminology and subgroups in schizophrenia.

    PubMed

    Rathod, Shanaya; Irfan, Muhammad; Bhargava, Rachna; Pinninti, Narsimha; Scott, Joseph; Mohammad Algahtani, Haifa; Guo, Zhihua; Gupta, Rishab; Nadkarni, Pallavi; Naeem, Farooq; Howells, Fleur; Sorsdahi, Katherine; Thorne, Kerensa; Osman-Hicks, Victoria; Pallikadavath, Sasee; Phiri, Peter; Carr, Hannah; Graves, Lizi; Kingdon, David

    2018-06-07

    research is warranted to investigate acceptability of terminology. Methods of reducing stigma are discussed in line with the findings. The study received ethical approval from ERGO (Ethics and Research Governance Online; ID: 15972) and subsequently from the ethics committee at each site. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  12. Hand anthropometry of Indian women.

    PubMed

    Nag, Anjali; Nag, P K; Desai, Hina

    2003-06-01

    their hand dimensions and strength range, might have higher prevalence of clinical symptoms and disorders of the hand. In view of the human hand-tool interface requirements, the present data on Indian women would be useful for ergo-design applications of hand tools and devices.

  13. Effects of one-night sleep deprivation on selective attention and isometric force in adolescent karate athletes.

    PubMed

    Ben Cheikh, Ridha; Latiri, Imed; Dogui, Mohamed; Ben Saad, Helmi

    2017-06-01

    Most of the available literature related to aspects of sleep deprivation is primarily focused on memory and learning, and studies regarding its effects on selective attention and/or physical performance are scarce. Moreover, the available literature includes general population or people involved in team sports (e.g. volleyball). However, only few studies were performed on athletes involved in combat sports (e.g. karate). The aim of the present study was to determine the effects of a total one-night sleep deprivation (1NSD) on activation and inhibition processes of selective attention and on maximal isometric force in karate athletes. Twelve young karate athletes (mean age 16.9±0.8 years) were enrolled. The protocol consists of two successive sessions: a normal night's sleep (NNS) and a total 1NSD. After each night, athletes performed selective attention and muscle strength tests during the same following three times (T) of the day: T1NNS or T11NSD: 8-9 a.m.; T2NNS or T21NSD: 12 a.m.-1 p.m.; T3NNS or T31NSD: 4-5 p.m. Activation (simple [SRT] and choice reaction times [CRT]) and inhibition (negative priming) processes were evaluated using Superlab v. 4.5 software (Cedrus Corporation, San Pedro, CA, USA). Maximal force and maximal force time (MFT) of brachial biceps isometric contraction were evaluated (Ergo System®, Globus, Codognè, Italy). A non-parametric test was used to evaluate the sessions (NNS vs. SND for the same time period) and time (T1NNS vs. 1NSD) effects. All athletes completed all tests after a NNS. Twelve, eleven and four athletes completed all tests at T11NSD, T21NSD and T31NSD, respectively. As for sessions effects, no statistically significant difference was found. As for time effects, a significant increase in SRT at T21NSD vs. T1NNS (345±47 vs. 317±33 ms, respectively), a significant increase in MFT at T21NSD vs. T1NNS (2172±260 vs.1885±292 ms, respectively), and no significant changes in CRT and negative priming reaction time or MFT data

  14. Measurement of Health Program Equity Made Easier: Validation of a Simplified Asset Index Using Program Data From Honduras and Senegal.

    PubMed

    Ergo, Alex; Ritter, Julie; Gwatkin, Davidson R; Binkin, Nancy

    2016-03-01

    the 8 simplified asset index iterations did this proportion exceed 50%. We conclude that substantially reducing the number of variables and questions used to assess equity is feasible, producing valid results and providing a less burdensome way for program implementers or researchers to evaluate whether their interventions are pro-poor. Developing a standardized, simplified asset questionnaire that could be used across countries may prove difficult, however, given that the variables that contribute the most to the asset index are largely country-specific. © Ergo et al.

  15. A Call for Innovation: Reflective Practices and Clinical Curricula of US Army Special Operations Forces Medics.

    PubMed

    Rocklein, Kate

    2014-01-01

    Special Operations Forces (SOF) medics have written and published numerous practice reflections that intricately describe their practice environments, clinical dilemmas, and suggestions for teaching and practice. The lack of translation of SOF medics experiential evidence to their curriculum has created a gap in evidence-based curriculum development. This study analyzed SOF medics learning and practice patterns and compared it to the evidence in the interdisciplinary clinical literature. After framing the problem, the literature was reviewed to determine appropriate tools by which perceptions and attitudes toward reflection-centered curricula could be measured. A recognizable practice reflection was extracted from the published SOF clinical literature and presented in writing to self-identified SOF medics and medic instructors via a descriptive crossover design, to ensure possible biases were mitigated. To measure SOF medics perceptions of reflection-based curricula, the Dundee Ready Education Environment Measure survey instrument was used, as it has validated psychometric properties and is used worldwide. SOF medics averaged scores of perceptions of their medic education indicated positive but not completely statistically significant preferences toward reflection-based curricula over traditional curriculum. Special Operations, medics, reflective practice, curricula BACKGROUND Special Operations Forces (SOF) medics practice in environments that are violent, austere, clandestine, and far removed from definitive hospital facilities. What was true almost 20 years ago?". . . academic demands of [Special Forces medic training] are roughly equivalent to those of an upper-level undergraduate curriculum in science or perhaps to those of first year medical school"?is even more challenging today. During this study, medics, physicians, and educators within the SOF medical community publicly and privately (ergo, names were redacted) expressed the need for curricular changes to

  16. Evidence of varying magma chambers and magmatic evolutionary histories for the Table Mountain Formation in the Carson-Iceberg Wilderness region, Sonora Pass, California

    NASA Astrophysics Data System (ADS)

    Asami, R.; Putirka, K. D.; Pluhar, C. J.; Farner, M. J.; Torrez, G.; Shrum, B. L.; Jones, S.

    2012-12-01

    The Sonora Pass- Dardanelles region in the Carson- Iceberg Wilderness area is located in the central Sierra Nevada and home to the type section for latites (Slemmons, 1953), a volcanic rock that contains high potassium, clinopyroxene, and plagioclase phenocysts. Latite lavas and tuffs exposed in the Sonora Pass region originated from the sources in the eastern Sierra Nevada (Noble et al., 1974) where lavas flowed toward California's Great Valley, and were emplaced in stream valleys along the way, which are now inverted to form "table mountains", ergo the name "Table Mountain Latite" (TML) (Slemmons, 1966). Similarly high-K volcanic rocks of the same age are exposed at Grouse Meadows, which is just north of the Walker Lane Caldera east of Sonora Pass, and at the type section, between Red Peak and Bald Peak west of Sonora Pass. Latites lavas and tuffs in all three regions were analyzed for major oxides and trace elements with X-ray fluorescence spectrometry at California State University, Fresno. Analysis of three locations of (TML) at the type section show that they (Ransome, 1898), may have a different magmatic evolutionary history compared to other latites, exposed at Sonora Pass and Grouse Meadows, as the latter two show similar major oxide and trace element compositions. Most compelling is the contrast in the behavior of Al2O3 and CaO at the type section. Variation diagrams show that at the type section Al2O3 and CaO enrichment decreases with increasing amounts of MgO as fractional crystallization occurs. Conversely, at Sonora Peak and Grouse Meadows, CaO and Al2O3 concentrations mostly increase as MgO decreases with fractional crystallization. This contrasts shows that plagioclase was a major fractioning phase at the type section, but not at the other two localities. This suggests that the lava flows at the type section were erupted from a distinct set of magma chambers and vents that underwent a very distinct magmatic evolutionary history, perhaps involving

  17. Strategy for eliciting antigen-specific CD8+ T cell-mediated immune response against a cryptic CTL epitope of merkel cell polyomavirus large T antigen

    PubMed Central

    2012-01-01

    Background Merkel cell carcinoma (MCC) is a relatively new addition to the expanding category of oncovirus-induced cancers. Although still comparably rare, the number of cases has risen dramatically in recent years. Further complicating this trend is that MCC is an extremely aggressive neoplasm with poor patient prognosis and limited treatment options for advanced disease. The causative agent of MCC has been identified as the merkel cell polyomavirus (MCPyV). The MCPyV-encoded large T (LT) antigen is an oncoprotein that is theorized to be essential for virus-mediated tumorigenesis and is therefore, an excellent MCC antigen for the generation of antitumor immune responses. As a foreign antigen, the LT oncoprotein avoids the obstacle of immune tolerance, which normally impedes the development of antitumor immunity. Ergo, it is an excellent target for anti-MCC immunotherapy. Since tumor-specific CD8+ T cells lead to better prognosis for MCC and numerous other cancers, we have generated a DNA vaccine that is capable of eliciting LT-specific CD8+ T cells. The DNA vaccine (pcDNA3-CRT/LT) encodes the LT antigen linked to a damage-associated molecular pattern, calreticulin (CRT), as it has been demonstrated that the linkage of CRT to antigens promotes the induction of antigen-specific CD8+ T cells. Results The present study shows that DNA vaccine-induced generation of LT-specific CD8+ T cells is augmented by linking CRT to the LT antigen. This is relevant since the therapeutic effects of the pcDNA3-CRT/LT DNA vaccine is mediated by LT-specific CD8+ T cells. Mice vaccinated with the DNA vaccine produced demonstrably more LT-specific CD8+ T cells. The DNA vaccine was also able to confer LT-specific CD8+ T cell-mediated protective and therapeutic effects to prolong the survival of mice with LT-expressing tumors. In the interest of determining the LT epitope which most MCC-specific CD8+ T cells recognize, we identified the amino acid sequence of the immunodominant LT epitope

  18. Human-Associated Bacteroides spp. and Human Polyomaviruses as Microbial Source Tracking Markers in Hawaii

    PubMed Central

    Caffaro-Filho, Roberto A.; Wong, Mayee; Harwood, Valerie J.; Moravcik, Philip; Fujioka, Roger S.

    2016-01-01

    ABSTRACT Identification of sources of fecal contaminants is needed to (i) determine the health risk associated with recreational water use and (ii) implement appropriate management practices to mitigate this risk and protect the environment. This study evaluated human-associated Bacteroides spp. (HF183TaqMan) and human polyomavirus (HPyV) markers for host sensitivity and specificity using human and animal fecal samples collected in Hawaii. The decay rates of those markers and indicator bacteria were identified in marine and freshwater microcosms exposed and not exposed to sunlight, followed by field testing of the usability of the molecular markers. Both markers were strongly associated with sewage, although the cross-reactivity of the HF183TaqMan (also present in 82% of canine [n = 11], 30% of mongoose [n = 10], and 10% of feline [n = 10] samples) needs to be considered. Concentrations of HF183TaqMan in human fecal samples exceeded those in cross-reactive animals at least 1,000-fold. In the absence of sunlight, the decay rates of both markers were comparable to the die-off rates of enterococci in experimental freshwater and marine water microcosms. However, in sunlight, the decay rates of both markers were significantly lower than the decay rate of enterococci. While both markers have their individual limitations in terms of sensitivity and specificity, these limitations can be mitigated by using both markers simultaneously; ergo, this study supports the concurrent use of HF183TaqMan and HPyV markers for the detection of sewage contamination in coastal and inland waters in Hawaii. IMPORTANCE This study represents an in-depth characterization of microbial source tracking (MST) markers in Hawaii. The distribution and concentrations of HF183TaqMan and HPyV markers in human and animal fecal samples and in wastewater, coupled with decay data obtained from sunlight-exposed and unexposed microcosms, support the concurrent application of HF183TaqMan and HPyV markers for

  19. Human-Associated Bacteroides spp. and Human Polyomaviruses as Microbial Source Tracking Markers in Hawaii.

    PubMed

    Kirs, Marek; Caffaro-Filho, Roberto A; Wong, Mayee; Harwood, Valerie J; Moravcik, Philip; Fujioka, Roger S

    2016-11-15

    Identification of sources of fecal contaminants is needed to (i) determine the health risk associated with recreational water use and (ii) implement appropriate management practices to mitigate this risk and protect the environment. This study evaluated human-associated Bacteroides spp. (HF183TaqMan) and human polyomavirus (HPyV) markers for host sensitivity and specificity using human and animal fecal samples collected in Hawaii. The decay rates of those markers and indicator bacteria were identified in marine and freshwater microcosms exposed and not exposed to sunlight, followed by field testing of the usability of the molecular markers. Both markers were strongly associated with sewage, although the cross-reactivity of the HF183TaqMan (also present in 82% of canine [n = 11], 30% of mongoose [n = 10], and 10% of feline [n = 10] samples) needs to be considered. Concentrations of HF183TaqMan in human fecal samples exceeded those in cross-reactive animals at least 1,000-fold. In the absence of sunlight, the decay rates of both markers were comparable to the die-off rates of enterococci in experimental freshwater and marine water microcosms. However, in sunlight, the decay rates of both markers were significantly lower than the decay rate of enterococci. While both markers have their individual limitations in terms of sensitivity and specificity, these limitations can be mitigated by using both markers simultaneously; ergo, this study supports the concurrent use of HF183TaqMan and HPyV markers for the detection of sewage contamination in coastal and inland waters in Hawaii. This study represents an in-depth characterization of microbial source tracking (MST) markers in Hawaii. The distribution and concentrations of HF183TaqMan and HPyV markers in human and animal fecal samples and in wastewater, coupled with decay data obtained from sunlight-exposed and unexposed microcosms, support the concurrent application of HF183TaqMan and HPyV markers for sewage contamination

  20. Sediment connectivity in a small catchment with badlands: Testing connectivity indices using fallout radionuclide tracers at the Vallcebre Research Catchments.

    NASA Astrophysics Data System (ADS)

    Gallart, Francesc; Latron, Jérôme; Vuolo, Diego; Martínez-Carreras, Núria; Pérez-Gallego, Nuria; Estrany, Joan; Ferrer, Laura

    2015-04-01

    At the Vallcebre Research Catchments (South Eastern Pyrenees), results obtained during over 20 years showed that badlands are the primary sources of sediments to the drainage network. Parent lutitic rocks are weathered during winter producing regoliths, which are eroded from badland surfaces mainly during summer intense rainstorms. Even if the produced sediments are mainly fine, due to the ephemeral nature of summer runoff events most of them are deposited on the stream beds, where may remain during some time (months to years). Within the MEDhyCON project, a fallout radionuclides (FRNs) tracing experiment (i.e., excess lead 210 (Pbx-210) and beryllium 7 (Be-7)) is being carried out in order to investigate sediment connectivity. A simplified Pbx-210 balance model on badland surfaces suggested a seasonal sawtooth-like activity pattern: FRN would be accumulated in regoliths from October to June and depleted in summer. Early summer erosion events would produce the sediments with the highest activity whereas late summer events would produce sediments with the least activity coming from the deeper regolith horizons. These findings lead us to intend two sediment connectivity indices analysing respectively the temporal and spatial variability of the Pb-210 activities within the fine sediments: (1) The temporal variability of activities in suspended sediments at the gauging stations, being a measure of sediment transfer, ergo connectivity; a high variability mimicking regolith activity temporal pattern would represent high connectivity, whereas a low variability would involve that the sediments were pooled in a large and slowly moving stock. (2) The ratio between fine sediment activities at the sources and fine stream sediment activities downstream; fine stream sediment activities higher than those at their sources and increasing downstream (ratio lower than the unity) may indicate long-term permanence (low connectivity) of sediments in the stream beds, because once

  1. An experimental investigation into the effects of pores and crystals on magma rheology

    NASA Astrophysics Data System (ADS)

    Coats, Rebecca; Cai, Biao; Kendrick, Jackie; Wallace, Paul; Hornby, Adrian; Miwa, Taka; Ashworth, James; von Aulock, Felix; Godinho, José; Lee, Peter; Lavallée, Yan

    2017-04-01

    The rheology of magma has a key control on eruption style; transitions in flow dynamics can be linked to changes in porosity, crystallinity and melt chemistry. Physical interactions due to the presence of both crystals and bubbles in a volcanic melt can influence a system's rheology by causing variations in viscosity and strain dependent flow behaviour, making eruption style difficult to predict. Ergo it is essential to gain an insight into the manner in which crystalline, porous magmas flow and fail. By conducting uniaxial compressive strength (UCS) tests on both volcanic rocks and synthetic samples at room and high temperatures, a deeper understanding of how these materials behave at volcanic conditions can be attained. Here we have taken advantage of a suite of highly crystalline ( 50 vol.%) dacite from Mt Unzen, with varying porosity (9-32 vol.%), along with a sintered glass with a range of atmospheric air filled pores (<3, 20 and 30 vol.%) and TiO2 particles (0-50 vol.%). Mt Unzen experiments have revealed that the UCS systematically decreases with an increase in porosity, matching other volcanic rocks in the literature and UCS is strain rate dependent. The latter of which, along with the observation that UCS increases at higher temperatures, has not previously been observed in glass-bearing volcanic rocks and was seen in both samples from Mt Unzen and in the glass-particle mixtures. From the synthetic sample tests at room temperature we see that the UCS does not vary with crystal content (across the range measured), but at high temperature preliminary results suggest strength decreases with particle volume. Gent's parallel plate technique was applied to calculate the viscosity of samples that appeared to flow under the applied stresses. Both natural and synthetic samples demonstrated a non-Newtonian, shear thinning response to applied strain rates. For the natural Mt. Unzen samples it appears that viscosity does not scale with porosity; which, at 50 vol

  2. PREFACE: Annual Conference on Functional Materials and Nanotechnologies - FM&NT 2011

    NASA Astrophysics Data System (ADS)

    Sternberg, Andris; Muzikante, Inta; Zicans, Janis

    2011-06-01

    Conference photograph ERAF logo International Organizing Committee Andris Sternberg (chairperson), Institute of Solid State Physics, University of Latvia, Latvia, MATERA Juras Banys, Vilnius University, Lithuania Gunnar Borstel, University of Osnabrück, Germany Niels E Christensen, University of Aarhus, Denmark Robert A Evarestov, St. Petersburg State University, Russia Claes-Goran Granqvist, Uppsala University, Sweden Dag Høvik, The Research Council of Norway, Norway, MATERA Marco Kirm, Institute of Physics, University of Tartu, Estonia Vladislav Lemanov, Ioffe Physical Technical Institute, Russia Witold Lojkowski, Institute of High Pressure Physics, Poland Ergo Nommiste, University of Tartu, Estonia Helmut Schober, Institut Laue-Langevin, France Sisko Sipilä, Finnish Funding Agency for Technology and Innovation, Finland, MATERA Ingólfur Torbjörnsson, Icelandic Centre for Research, Iceland, MATERA Marcel H Van de Voorde, University of Technology Delft, The Netherlands International Program Committee Inta Muzikante (chairperson), Institute of Solid State Physics, University of Latvia, Latvia, MATERA Liga Berzina-Cimdina, Institute of Biomaterials and Biomechanics, Riga Technical University, Latvia Janis Grabis, Institute of Inorganic Chemistry, Riga Technical University, Latvia Leonid V Maksimov, Vavilov State Optical Institute, Russia Linards Skuja, Institute of Solid State Physics, University of Latvia, Latvia Maris Springis, Institute of Solid State Physics, University of Latvia, Latvia Ilmars Zalite, Institute of Inorganic Chemistry, Riga Technical University, Latvia Janis Zicans, Institute of Polymers, Riga Technical University Local Committee: Liga Grinberga, Anatolijs Sarakovskis, Jurgis Grube, Raitis Siatkovskis, Maris Kundzins, Anna Muratova, Maris Springis, Aivars Vembris, Krisjanis Smits, Andris Fedotovs, Dmitrijs Bocarovs, Anastasija Jozepa, Andris Krumins.

  3. Testing fine sediment connectivity hypotheses using fallout radionuclide tracers in a small catchment with badlands. Vallcebre Research Catchments (NE Spain)

    NASA Astrophysics Data System (ADS)

    Gallart, Francesc; Latron, Jérôme; Vuolo, Diego; Martínez-Carreras, Núria; Pérez-Gallego, Nuria; Ferrer, Laura; Estrany, Joan

    2016-04-01

    In the Vallcebre Research Catchments (NE Spain), results obtained during over 20 years showed that badlands are the primary sources of sediments to the drainage network. Parent lutitic rocks are weathered during winter producing regoliths, which are eroded from badland surfaces mainly during summer intense rainstorms. Even if the produced sediments are mainly fine, due to the ephemeral nature of summer runoff events most of them are deposited on the stream beds, where they may remain during some time (months to years). Within the MEDhyCON project, a fallout radionuclides (FRNs) tracing experiment (i.e., excess lead 210 (Pbx-210) and beryllium 7 (Be-7)) is being carried out in order to investigate sediment connectivity. A simplified Pbx-210 balance model on badland surfaces suggested a seasonal sawtooth-like activity pattern: FRN being accumulated in regoliths from October to June and depleted in summer. Early summer erosion events would produce the sediments with the highest activity whereas late summer events would produce sediments with the lowest activity coming from the deeper regolith horizons. These findings lead us to launch two sediment transfer connectivity hypotheses analysing respectively the temporal and spatial variability of the Pb-210 activities within the fine sediments at the small catchment scale: (1) The temporal variability of suspended sediment activities at the gauging stations is a measure of sediment transfer immediacy, ergo connectivity. Hence, a high variability in suspended sediment activities, mimicking regolith activity temporal pattern would indicate high connectivity, whereas a low variability, meaning that sediments are mostly pooled in a large and slowly moving stock, would indicate low connectivity. (2) In a drainage system where fine sediments temporarily remain on the dry stream bed, the ratio between fine sediment activities at the sources and fine in-stream sediment activities downstream is a measure of sediment connectivity

  4. COMPARISON OF HYDROCORTISONE 10 MG TABLETS: TABLET HARDNESS OPTIMISED FOR ADULT USE HAS NEGATIVE CONSEQUENCES FOR PAEDIATRIC USE.

    PubMed

    Saimbi, Sarina; Madden, Valerie; Stirling, Heather; Yahyouche, Asma; Batchelor, Hannah

    2016-09-01

    Children's medicines are not always readily available as an age appropriate product and manipulation of adult products is often required. Recently the commercial manufacturing process for 10 mg hydrocortisone tablets has changed and the compression force increased due to tablets fracturing on removal from the blister pack. However, this change led to parents of children requiring hydrocortisone reporting that the tablets were more difficult to manipulate.This study evaluated 10 mg hydrocortisone tablets for their suitability for manipulation in order to deliver an appropriate dose to children (2 mg dose). The physical properties of tablets with the old and new compression force were compared as well as the accuracy of obtaining the paediatric dose. The tablets compared were hydrocortisone Auden 10 mg tablets (Brand A, PL16876/002)-these are the newer, harder tablets- and hydrocortisone 10 mg tablets (Brand B, PL17507/0097). Tablet physical properties including friability (Copley FRV200) and tablet hardness (Copley TBF1000) were compared. The accuracy of split doses (halve and quarter tablets) were recorded on a Sartorius analytical balance. The accuracy of the 2 mg paediatric dosing was assessed by crushing the tablet, adding 10 mL of water and extracting 2 mL. The concentration was measured using UV analysis (Jenway Genova Plus) according to a calibration curve (wavelength=246 nm). Two devices were used to crush the tablets: a spoon onto a plate and a commercially available crushing device (Apothecary Ezy Crush Pill Crusher With Ergo Grip). As anticipated Brand A tablets were harder (51.85 ±5.1 N) compared to Brand B (30.99±4.1 N). Brand A tablets passed the friability testing with <1% weight loss whereas Brand B failed as 5 tablets broke during testing.The accuracy of split doses using the score lines to halve and quarter the tablets showed that Brand A were generally better with smaller ranges for both halves (Range for A=41-55%; B=29

  5. PREFACE: International Conference on Functional Materials and Nanotechnologies 2013 (FM&NT2013)

    NASA Astrophysics Data System (ADS)

    Nõmmiste, Ergo; Kirm, Marco; Plank, Toomas

    2013-12-01

    oral, and 5 commercial talks were delivered and more than 200 posters were presented. In the framework of conference more than 20 papers were submitted to a topical issue of Physica Scripta. Based on the work presented at the conference, 62 articles are included in this volume of IOP Conference Series: Materials Science and Engineering. Additional information about FM&NT-2013 is available at its homepage http://fmnt.ut.ee/. The Organizing Committee would like to thank all the speakers, contributors, session chairs, referees and other involved staff for their efforts in making FM&NT-2013 successful. Special thanks for their hard work dealing with the conference papers goes to the Guest Editors: Professor Mikhail Brik, Dr Svetlana Zazubovits, Dr Arvo Kikas, Dr Rainer Pärna. The Organizing Committee hopes that Conference gave participants good insight into recent developments in nanotechnology, sustainable energetics, processing and modelling of multifunctional materials and research done using synchrotron radiation or other novel light sources. We sincerely hope that conference has provided support for the sharing of information and has brought together many young and experienced scientists from different fields, leading to fruitful discussions. We hope that all participants had good and memorable time in Tartu. On the behalf of organising committee Professor Ergo Nõmmiste Dr Marco Kirm Dr Toomas Plank The PDF also contains lists of the committees, the conference photograph and the sponsor's logos.

  6. Quantitative Analysis Of Acoustic Emission From Rock Fracture Experiments

    NASA Astrophysics Data System (ADS)

    Goodfellow, Sebastian David

    This thesis aims to advance the methods of quantitative acoustic emission (AE) analysis by calibrating sensors, characterizing sources, and applying the results to solve engi- neering problems. In the first part of this thesis, we built a calibration apparatus and successfully calibrated two commercial AE sensors. The ErgoTech sensor was found to have broadband velocity sensitivity and the Panametrics V103 was sensitive to surface normal displacement. These calibration results were applied to two AE data sets from rock fracture experiments in order to characterize the sources of AE events. The first data set was from an in situ rock fracture experiment conducted at the Underground Research Laboratory (URL). The Mine-By experiment was a large scale excavation response test where both AE (10 kHz - 1 MHz) and microseismicity (MS) (1 Hz - 10 kHz) were monitored. Using the calibration information, magnitude, stress drop, dimension and energy were successfully estimated for 21 AE events recorded in the tensile region of the tunnel wall. Magnitudes were in the range -7.5 < Mw < -6.8, which is consistent with other laboratory AE results, and stress drops were within the range commonly observed for induced seismicity in the field (0.1 - 10 MPa). The second data set was AE collected during a true-triaxial deformation experiment, where the objectives were to characterize laboratory AE sources and identify issues related to moving the analysis from ideal in situ conditions to more complex laboratory conditions in terms of the ability to conduct quantitative AE analysis. We found AE magnitudes in the range -7.8 < Mw < -6.7 and as with the in situ data, stress release was within the expected range of 0.1 - 10 MPa. We identified four major challenges to quantitative analysis in the laboratory, which in- hibited our ability to study parameter scaling (M0 ∝ fc -3 scaling). These challenges were 0c (1) limited knowledge of attenuation which we proved was continuously evolving, (2

  7. Magnetic jets from accretion disks : field structure and X-ray emission

    NASA Astrophysics Data System (ADS)

    Memola, Elisabetta

    2002-06-01

    . We also calculate the X-ray emission in the energy range 0.2--10.1,keV from a microquasar relativistic jet close to its source of 5 solar masses. In order to do it, we apply the jet flow parameters (densities, velocities, temperatures of each volume element along the collimating jet) derived in the literature from the relativistic magnetohydrodynamic equations. We obtain theoretical thermal X-ray spectra of the innermost jet as composition of the spectral contributions of the single volume elements along the jet. Since relativistic effects as Doppler shift and Doppler boosting due to the motion of jets toward us might be important, we investigate how the spectra are affected by them considering different inclinations of the line of sight to the jet axis. Emission lines of highly ionized iron are clearly visible in our spectra, probably also observed in the Galactic microquasars GRS 1915+105 and XTE J1748-288. The Doppler shift of the emission lines is always evident. Due to the chosen geometry of the magnetohydrodynamic jet, the inner X-ray emitting part is not yet collimated. Ergo, depending on the viewing angle, the Doppler boosting does not play a major role in the total spectra. This is the first time that X-ray spectra have been calculated from the numerical solution of a magnetohydrodynamic jet. Astrophysikalische Jets sind stark kollimierte Materieströmungen hoher Geschwindigkeit. Sie stehen im Zusammenhang mit einer Fülle verschiedener astrophysikalischer Objekte wie jungen Sternen, stellaren schwarzen Löchern ('Mikro-Quasare'), Galaxien mit aktivem Kern (AGN) und wahrscheinlich auch mit dem beobachteten intensiven Aufblitzen von Gamma-Strahlung (Gamma Ray Bursts). Insbesondere hat sich gezeigt, dass die Jets der Mikro-Quasare wahrscheinlich als kleinskalige Version der Jets der AGN anzusehen sind. Neben den Beobachtungen haben vor allem auch theoretische Überlegungen gezeigt, dass Magnetfelder bei der Jetentstehung, -beschleunigung und -kollimation eine

  8. PREFACE: International Conference on Functional Materials and Nanotechnologies (FM&NT2012)

    NASA Astrophysics Data System (ADS)

    Sternberg, Andris; Muzikante, Inta; Sarakovskis, Anatolijs; Grinberga, Liga

    2012-08-01

    Organizing Committee sincerely hopes that the Conference gave all the participants new insights into the widespread development of functional materials and nanotechnologies and would enhance the circulation of the information released at the meeting. Inta Muzikante Andris Sternberg Liga Grinberga Anatolijs Sarakovskis Conference photograph The manuscripts are published thanks to the financial support from ERAF project 'Atbalsts starptautiskas sadarbibas projektiem zinatne un tehnologijas LU Cietvielu fizikas instituta' Nr.2010/0204/2DP/2.1.1.2.0./10/APIA/VIAA/010 Sponsors Sponsors flag Sponsors logo International Organizing Committee 1. Andris Sternberg (chairperson), Institute of Solid State Physics, University of Latvia, Latvia 2. Juras Banys, Vilnius University, Lithuania 3. Gunnar Borstel, University of Osnabrück, Germany 4. Niels E Christensen, University of Aarhus, Denmark 5. Robert A Evarestov, St. Petersburg State University, Russia 6. Claes-Goran Granqvist, Uppsala University, Sweden 7. Dag Høvik, The Research Council of Norway, Norway 8. Marco Kirm, Institute of Physics, University of Tartu, Estonia 9. Jiri Kulda, Institut Laue-Langevin, France 10. Witold Lojkowski, Institute of High Pressure Physics, Poland 11. Ergo Nommiste, University of Tartu, Estonia 12. Ingólfur Torbjörnsson, Icelandic Centre for Research, Iceland 13. Marcel H. Van de Voorde, University of Technology Delft, The Netherlands International Program Committee 1. Liga Grinberga (chairperson), Institute of Solid State Physics, University of Latvia, Latvia 2. Eugene Kotomin, Max Planck Institute for Solid State Research, Germany 3. Martins Rutkis, Institute of Solid State Physics, University of Latvia, Latvia 4. Inta Muzikante, Institute of Solid State Physics, University of Latvia, Latvia 5. Liga Berzina-Cimdina, Institute of Biomaterials and Biomechanics, Riga Technical University, Latvia 6. Janis Grabis, Institute of Inorganic Chemistry, Riga Technical University, Latvia 7. Linards Skuja