Effect and key factors of byproducts valorization: the case of dairy industry.

PubMed

Banaszewska, A; Cruijssen, F; Claassen, G D H; van der Vorst, J G A J

2014-01-01

Production of many consumer products results in byproducts that contain a considerably large part of nutrients originating from input materials. High production volumes, environmental impact, and nutritional content of byproducts make them an important subject for careful valorization. Valorization allows us to explore the possibility of reusing nutrients in the production of main products, and thus highlights the potential gains that can be achieved. The main aim of this study was to evaluate the added value of cheese whey valorization, and to determine the effect of integral valorization of main products and byproducts on the profit of a dairy producer. Several scenarios and cases were implemented and analyzed using a decision support tool, the integral dairy valorization model. Data originated from the international dairy processor FrieslandCampina (Amersfoort, the Netherlands). The outcomes of scenarios were analyzed with regard to profit and shifts in the production of nonwhey end products, and were validated by company experts. Modeling results showed that the valorization of byproducts is very profitable (24.3% more profit). Furthermore, additional profit can be achieved when 2 valorization processes (main products and byproducts) are integrated. This effect is, however, considerably affected by current capacity and market demand limitations. Significant benefits can be created if demand of whey-based products is increased by 25%. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Valorization of Cereal Based Biorefinery Byproducts: Reality and Expectations

PubMed Central

2013-01-01

The growth of the biobased economy will lead to an increase in new biorefinery activities. All biorefineries face the regular challenges of efficiently and economically treating their effluent to be compatible with local discharge requirements and to minimize net water consumption. The amount of wastes resulting from biorefineries industry is exponentially growing. The valorization of such wastes has drawn considerable attention with respect to resources with an observable economic and environmental concern. This has been a promising field which shows great prospective toward byproduct usage and increasing value obtained from the biorefinery. However, full-scale realization of biorefinery wastes valorization is not straightforward because several microbiological, technological and economic challenges need to be resolved. In this review we considered valorization options for cereals based biorefineries wastes while identifying their challenges and exploring the opportunities for future process. PMID:23931701

Valorization of cereal based biorefinery byproducts: reality and expectations.

PubMed

Elmekawy, Ahmed; Diels, Ludo; De Wever, Heleen; Pant, Deepak

2013-08-20

The growth of the biobased economy will lead to an increase in new biorefinery activities. All biorefineries face the regular challenges of efficiently and economically treating their effluent to be compatible with local discharge requirements and to minimize net water consumption. The amount of wastes resulting from biorefineries industry is exponentially growing. The valorization of such wastes has drawn considerable attention with respect to resources with an observable economic and environmental concern. This has been a promising field which shows great prospective toward byproduct usage and increasing value obtained from the biorefinery. However, full-scale realization of biorefinery wastes valorization is not straightforward because several microbiological, technological and economic challenges need to be resolved. In this review we considered valorization options for cereals based biorefineries wastes while identifying their challenges and exploring the opportunities for future process.

Citrus waste as feedstock for bio-based products recovery: Review on limonene case study and energy valorization.

PubMed

Negro, Viviana; Mancini, Giuseppe; Ruggeri, Bernardo; Fino, Debora

2016-08-01

The citrus peels and residue of fruit juices production are rich in d-limonene, a cyclic terpene characterized by antimicrobial activity, which could hamper energy valorization bioprocess. Considering that limonene is used in nutritional, pharmaceutical and cosmetic fields, citrus by-products processing appear to be a suitable feedstock either for high value product recovery or energy bio-processes. This waste stream, more than 10MTon at 2013 in European Union (AIJN, 2014), can be considered appealing, from the view point of conducting a key study on limonene recovery, as its content of about 1%w/w of high value-added molecule. Different processes are currently being studied to recover or remove limonene from citrus peel to both prevent pollution and energy resources recovery. The present review is aimed to highlight pros and contras of different approaches suggesting an energy sustainability criterion to select the most effective one for materials and energy valorization. Copyright © 2016 Elsevier Ltd. All rights reserved.

Selective recovery of silver from waste low-temperature co-fired ceramic and valorization through silver nanoparticle synthesis.

PubMed

Swain, Basudev; Shin, Dongyoon; Joo, So Yeong; Ahn, Nak Kyoon; Lee, Chan Gi; Yoon, Jin-Ho

2017-11-01

Considering the value of silver metal and silver nanoparticles, the waste generated during manufacturing of low temperature co-fired ceramic (LTCC) were recycled through the simple yet cost effective process by chemical-metallurgy. Followed by leaching optimization, silver was selectively recovered through precipitation. The precipitated silver chloride was valorized though silver nanoparticle synthesis by a simple one-pot greener synthesis route. Through leaching-precipitation optimization, quantitative selective recovery of silver chloride was achieved, followed by homogeneous pure silver nanoparticle about 100nm size were synthesized. The reported recycling process is a simple process, versatile, easy to implement, requires minimum facilities and no specialty chemicals, through which semiconductor manufacturing industry can treat the waste generated during manufacturing of LTCC and reutilize the valorized silver nanoparticles in manufacturing in a close loop process. Our reported process can address issues like; (i) waste disposal, as well as value-added silver recovery, (ii) brings back the material to production stream and address the circular economy, and (iii) can be part of lower the futuristic carbon economy and cradle-to-cradle technology management, simultaneously. Copyright © 2017 Elsevier Ltd. All rights reserved.

Knowledge and Valorization of Historical Sites Through 3d Documentation and Modeling

NASA Astrophysics Data System (ADS)

Farella, E.; Menna, F.; Nocerino, E.; Morabito, D.; Remondino, F.; Campi, M.

2016-06-01

The paper presents the first results of an interdisciplinary project related to the 3D documentation, dissemination, valorization and digital access of archeological sites. Beside the mere 3D documentation aim, the project has two goals: (i) to easily explore and share via web references and results of the interdisciplinary work, including the interpretative process and the final reconstruction of the remains; (ii) to promote and valorize archaeological areas using reality-based 3D data and Virtual Reality devices. This method has been verified on the ruins of the archeological site of Pausilypon, a maritime villa of Roman period (Naples, Italy). Using Unity3D, the virtual tour of the heritage site was integrated and enriched with the surveyed 3D data, text documents, CAAD reconstruction hypotheses, drawings, photos, etc. In this way, starting from the actual appearance of the ruins (panoramic images), passing through the 3D digital surveying models and several other historical information, the user is able to access virtual contents and reconstructed scenarios, all in a single virtual, interactive and immersive environment. These contents and scenarios allow to derive documentation and geometrical information, understand the site, perform analyses, see interpretative processes, communicate historical information and valorize the heritage location.

The valorization of the plastic waste to the rheological characteristics of bituminous mixtures

NASA Astrophysics Data System (ADS)

Boucherba, Mohammed; Kriker, Abdelouahed; Kebaili, Nabil

2017-02-01

The valorization of materials used at the end of the cycle currently constitutes one of the major challenges for the state for the safeguarding of the environment. Indeed, plastic waste from their obstruction and weak biodegradability often constitutes a threat for health, nature and the environment. The present study treats a mining method and valorization of these wastes in the road, where this waste is incorporated in the pure bitumen of asphalt concretes using the Dry process. The vital objective of this work is to see their impact on the mechanical behavior of these concretes using the Marshall Test and NAT.

From gene to biorefinery: microbial β-etherases as promising biocatalysts for lignin valorization.

PubMed

Picart, Pere; de María, Pablo Domínguez; Schallmey, Anett

2015-01-01

The set-up of biorefineries for the valorization of lignocellulosic biomass will be core in the future to reach sustainability targets. In this area, biomass-degrading enzymes are attracting significant research interest for their potential in the production of chemicals and biofuels from renewable feedstock. Glutathione-dependent β-etherases are emerging enzymes for the biocatalytic depolymerization of lignin, a heterogeneous aromatic polymer abundant in nature. They selectively catalyze the reductive cleavage of β-O-4 aryl-ether bonds which account for 45-60% of linkages present in lignin. Hence, application of β-etherases in lignin depolymerization would enable a specific lignin breakdown, selectively yielding (valuable) low-molecular-mass aromatics. Albeit β-etherases have been biochemically known for decades, only very recently novel β-etherases have been identified and thoroughly characterized for lignin valorization, expanding the enzyme toolbox for efficient β-O-4 aryl-ether bond cleavage. Given their emerging importance and potential, this mini-review discusses recent developments in the field of β-etherase biocatalysis covering all aspects from enzyme identification to biocatalytic applications with real lignin samples.

From gene to biorefinery: microbial β-etherases as promising biocatalysts for lignin valorization

PubMed Central

Picart, Pere; de María, Pablo Domínguez; Schallmey, Anett

2015-01-01

The set-up of biorefineries for the valorization of lignocellulosic biomass will be core in the future to reach sustainability targets. In this area, biomass-degrading enzymes are attracting significant research interest for their potential in the production of chemicals and biofuels from renewable feedstock. Glutathione-dependent β-etherases are emerging enzymes for the biocatalytic depolymerization of lignin, a heterogeneous aromatic polymer abundant in nature. They selectively catalyze the reductive cleavage of β-O-4 aryl-ether bonds which account for 45–60% of linkages present in lignin. Hence, application of β-etherases in lignin depolymerization would enable a specific lignin breakdown, selectively yielding (valuable) low-molecular-mass aromatics. Albeit β-etherases have been biochemically known for decades, only very recently novel β-etherases have been identified and thoroughly characterized for lignin valorization, expanding the enzyme toolbox for efficient β-O-4 aryl-ether bond cleavage. Given their emerging importance and potential, this mini-review discusses recent developments in the field of β-etherase biocatalysis covering all aspects from enzyme identification to biocatalytic applications with real lignin samples. PMID:26388858

Enzymatic Processes to Unlock the Lignin Value

PubMed Central

Hämäläinen, Veera; Grönroos, Toni; Suonpää, Anu; Heikkilä, Matti Wilhem; Romein, Bastiaan; Ihalainen, Petri; Malandra, Sara; Birikh, Klara R.

2018-01-01

Main hurdles of lignin valorization are its diverse chemical composition, recalcitrance, and poor solubility due to high-molecular weight and branched structure. Controlled fragmentation of lignin could lead to its use in higher value products such as binders, coatings, fillers, etc. Oxidative enzymes (i.e., laccases and peroxidases) have long been proposed as a potentially promising tool in lignin depolymerization. However, their application was limited to ambient pH, where lignin is poorly soluble in water. A Finnish biotechnology company, MetGen Oy, that designs and supplies industrial enzymes, has developed and brought to market several lignin oxidizing enzymes, including an extremely alkaline lignin oxidase MetZyme® LIGNO™, a genetically engineered laccase of bacterial origin. This enzyme can function at pH values as high as 10–11 and at elevated temperatures, addressing lignin at its soluble state. In this article, main characteristics of this enzyme as well as its action on bulk lignin coming from an industrial process are demonstrated. Lignin modification by MetZyme® LIGNO™ was characterized by size exclusion chromatography, UV spectroscopy, and dynamic light scattering for monitoring particle size of solubilized lignin. Under highly alkaline conditions, laccase treatment not only decreased molecular weight of lignin but also increased its solubility in water and altered its dispersion properties. Importantly, organic solvent-free soluble lignin fragmentation allowed for robust industrially relevant membrane separation technologies to be applicable for product fractionation. These enzyme-based solutions open new opportunities for biorefinery lignin valorization thus paving the way for economically viable biorefinery business. PMID:29623274

Technological advances and applications of hydrolytic enzymes for valorization of lignocellulosic biomass.

PubMed

Manisha; Yadav, Sudesh Kumar

2017-12-01

Hydrolytic enzymes are indispensable tools in the production of various foodstuffs, drugs, and consumables owing to their applications in almost every industrial process nowadays. One of the foremost areas of interest involving the use of hydrolytic enzymes is in the transformation of lignocellulosic biomass into value added products. However, limitations of the processes due to inadequate enzyme activity and stability with a narrow range of pH and temperature optima often limit their effective usage. The innovative technologies, involving manipulation of enzyme activity and stability through mutagenesis, genetic engineering and metagenomics lead to a major leap in all the fields using hydrolytic enzymes. This article provides recent advancement towards the isolation and use of microbes for lignocellulosic biomass utilisation, microbes producing the hydrolytic enzymes, the modern age technologies used to manipulate and enhance the hydrolytic enzyme activity and the applications of such enzymes in value added products development from lignocellulosic biomass. Copyright © 2017 Elsevier Ltd. All rights reserved.

The role of anaerobic digestion in the emerging energy economy.

PubMed

Batstone, Damien John; Virdis, Bernardino

2014-06-01

Anaerobic digestion is the default process for biological conversion of residue organics to renewable energy and biofuel in the form of methane. However, its scope of application is expanding, due to availability of new technologies, and the emerging drivers of energy and nutrient conservation and recovery. Here, we outline two of these new application areas, namely wastewater nutrient and energy recovery, and generation of value added chemicals through mixed culture biotechnology. There exist two options for nutrient and energy recovery from domestic wastewater: low energy mainline and partition-release-recovery. Both are heavily dependent on anaerobic digestion as an energy generating and nutrient release step, and have been enabled by new technologies such as low emission anaerobic membrane processes. The area of mixed culture biotechnology has been previously identified as a key industrial opportunity, but is now moving closer to application due application of existing and new technologies. As well as acting as a core technology option in bioproduction, anaerobic digestion has a key role in residual waste valorization and generation of energy for downstream processing. These new application areas and technologies are emerging simultaneously with substantial advances in knowledge of underlying mechanisms such as electron transfer, understanding of which is critical to development of the new application areas. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Piancatelli reaction and its variants: recent applications to high added-value chemicals and biomass valorization.

PubMed

Verrier, Charlie; Moebs-Sanchez, Sylvie; Queneau, Yves; Popowycz, Florence

2018-01-31

The Piancatelli reaction, also called the Piancatelli rearrangement, consists in the direct conversion of furfuryl alcohols to cyclopentenone derivatives through a furan ring opening-electrocyclization process. Discovered in the late 70's, this reaction has been scarcely used for more than 40 years but recently has been the focus of particular interest from the scientific community and an increasing number of publications on the topic have emerged in the last few years. The first part of this review provides an overview of the recent achievements in classical Piancatelli reactions, discussing reaction conditions and catalytic systems, whereas the second part focuses on the variants recently developed, including the use of new nucleophiles in the process. Finally, the third part of this review deals with the recent application of this transformation to the production of commodity chemicals from renewable carbon feedstocks based on sugar-derived furanic platforms.

Recent advances in oxidative valorization of lignin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ma, Ruoshui; Guo, Mond; Zhang, Xiao

Lignin, an aromatic macromolecule synthesized by all higher plants, is one of the most intriguing natural materials for utilization across a wide range of applications. Depolymerization and fragmentation of lignin into small chemicals constituents which can either replace current market products or be used building blocks for new material synthesis is a focus of current lignin valorization strategies. And among the variety of lignin degradation chemistries, catalytic oxidation of lignin presents an energy efficient means of lignin depolymerization and generating selective reaction products. Our review provides a summary of the recent advancements in oxidative lignin valorization couched in a discussionmore » on how these chemistries may contribute to the degradation of the lignin macromolecule through three major approaches: 1) inter-unit linkages cleavage; 2) propanyl side-chain oxidative modification; and 3) oxidation of the aromatic ring and ring cleavage reactions.« less

Recent advances in oxidative valorization of lignin

DOE PAGES

Ma, Ruoshui; Guo, Mond; Zhang, Xiao

2017-07-21

Lignin, an aromatic macromolecule synthesized by all higher plants, is one of the most intriguing natural materials for utilization across a wide range of applications. Depolymerization and fragmentation of lignin into small chemicals constituents which can either replace current market products or be used building blocks for new material synthesis is a focus of current lignin valorization strategies. And among the variety of lignin degradation chemistries, catalytic oxidation of lignin presents an energy efficient means of lignin depolymerization and generating selective reaction products. Our review provides a summary of the recent advancements in oxidative lignin valorization couched in a discussionmore » on how these chemistries may contribute to the degradation of the lignin macromolecule through three major approaches: 1) inter-unit linkages cleavage; 2) propanyl side-chain oxidative modification; and 3) oxidation of the aromatic ring and ring cleavage reactions.« less

Bio-refinery approach for spent coffee grounds valorization.

PubMed

Mata, Teresa M; Martins, António A; Caetano, Nídia S

2018-01-01

Although normally seen as a problem, current policies and strategic plans concur that if adequately managed, waste can be a source of the most interesting and valuable products, among which metals, oils and fats, lignin, cellulose and hemicelluloses, tannins, antioxidants, caffeine, polyphenols, pigments, flavonoids, through recycling, compound recovery or energy valorization, following the waste hierarchy. Besides contributing to more sustainable and circular economies, those products also have high commercial value when compared to the ones obtained by currently used waste treatment methods. In this paper, it is shown how the bio-refinery framework can be used to obtain high value products from organic waste. With spent coffee grounds as a case study, a sequential process is used to obtain first the most valuable, and then other products, allowing proper valorization of residues and increased sustainability of the whole process. Challenges facing full development and implementation of waste based bio-refineries are highlighted. Copyright © 2017 Elsevier Ltd. All rights reserved.

Thermochemical valorization and characterization of household biowaste.

PubMed

Vakalis, S; Sotiropoulos, A; Moustakas, K; Malamis, D; Vekkos, K; Baratieri, M

2017-12-01

Valorization of municipal solid waste (MSW), by means of energy and material recovery, is considered to be a crucial step for sustainable waste management. A significant fraction of MSW is comprised from food waste, the treatment of which is still a challenge. Therefore, the conventional disposal of food waste in landfills is being gradually replaced by recycling aerobic treatment, anaerobic digestion and waste-to-energy. In principle, thermal processes like combustion and gasification are preferred for the recovery of energy due to the higher electrical efficiency and the significantly less time required for the process to be completed when compared to biological process, i.e. composting, anaerobic digestion and transesterification. Nonetheless, the high water content and the molecular structure of biowaste are constraining factors in regard to the application of thermal conversion pathways. Investigating alternative solutions for the pre-treatment and more energy efficient handling of this waste fraction may provide pathways for the optimization of the whole process. In this study, by means of utilizing drying/milling as an intermediate step, thermal treatment of household biowaste has become possible. Household biowaste has been thermally processed in a bench scale reactor by means of torrefaction, carbonization and high temperature pyrolysis. According to the operational conditions, fluctuating fractions of biochar, bio-oil (tar) and syngas were recovered. The thermochemical properties of the feedstock and products were analyzed by means of Simultaneous Thermal Analysis (STA), Ultimate and Proximate analysis and Attenuated Total Reflectance (ATR). The analysis of the products shows that torrefaction of dried household biowaste produces an energy dense fuel and high temperature pyrolysis produces a graphite-like material with relatively high yield. Copyright © 2016 Elsevier Ltd. All rights reserved.

Pre-aeration of food waste to augment acidogenic process at higher organic load: Valorizing biohydrogen, volatile fatty acids and biohythane.

PubMed

Sarkar, Omprakash; Venkata Mohan, S

2017-10-01

Application of pre-aeration (AS) to waste prior to feeding was evaluated on acidogenic process in a semi-pilot scale biosystem for the production of biobased products (biohydrogen, volatile fatty acids (VFA) and biohythane) from food waste. Oxygen assisted in pre-hydrolysis of waste along with the suppression of methanogenic activity resulting in enhanced acidogenic product formation. AS operation resulted in 97% improvement in hydrogen conversion efficiency (HCE) and 10% more VFA production than the control. Increasing the organic load (OL) of food waste in association with AS application improved the productivity. The application of AS also influenced concentration and composition of fatty acid. Highest fraction of acetic (5.3g/l), butyric (0.7g/l) and propionic acid (0.84g/l) was achieved at higher OL (100g COD/l) with good degree of acidification (DOA). AS strategy showed positive influence on biofuel (biohydrogen and biohythane) production along with the biosynthesis of short chain fatty acids functioning as a low-cost pretreatment strategy in a single stage bioprocess. Copyright © 2017 Elsevier Ltd. All rights reserved.

The protein fraction from wheat-based dried distiller's grain with solubles (DDGS): extraction and valorization

PubMed Central

Villegas-Torres, M.F.; Ward, J.M.; Lye, G.J.

2015-01-01

Nowadays there is worldwide interest in developing a sustainable economy where biobased chemicals are the lead actors. Various potential feedstocks are available including glycerol, rapeseed meal and municipal solid waste (MSW). For biorefinery applications the byproduct streams from distilleries and bioethanol plants, such as wheat-based dried distiller's grain with solubles (DDGS), are particularly attractive, as they do not compete for land use. Wheat DDGS is rich in polymeric sugars, proteins and oils, making it ideal as a current animal feed, but also a future substrate for the synthesis of fine and commodity chemicals. This review focuses on the extraction and valorization of the protein fraction of wheat DDGS as this has received comparatively little attention to date. Since wheat DDGS production is expected to increase greatly in the near future, as a consequence of expansion of the bioethanol industry in the UK, strategies to valorize the component fractions of DDGS are urgently needed. PMID:25644639

Lignolytic-consortium omics analyses reveal novel genomes and pathways involved in lignin modification and valorization.

PubMed

Moraes, Eduardo C; Alvarez, Thabata M; Persinoti, Gabriela F; Tomazetto, Geizecler; Brenelli, Livia B; Paixão, Douglas A A; Ematsu, Gabriela C; Aricetti, Juliana A; Caldana, Camila; Dixon, Neil; Bugg, Timothy D H; Squina, Fabio M

2018-01-01

Lignin is a heterogeneous polymer representing a renewable source of aromatic and phenolic bio-derived products for the chemical industry. However, the inherent structural complexity and recalcitrance of lignin makes its conversion into valuable chemicals a challenge. Natural microbial communities produce biocatalysts derived from a large number of microorganisms, including those considered unculturable, which operate synergistically to perform a variety of bioconversion processes. Thus, metagenomic approaches are a powerful tool to reveal novel optimized metabolic pathways for lignin conversion and valorization. The lignin-degrading consortium (LigMet) was obtained from a sugarcane plantation soil sample. The LigMet taxonomical analyses (based on 16S rRNA) indicated prevalence of Proteobacteria , Actinobacteria and Firmicutes members, including the Alcaligenaceae and Micrococcaceae families, which were enriched in the LigMet compared to sugarcane soil. Analysis of global DNA sequencing revealed around 240,000 gene models, and 65 draft bacterial genomes were predicted. Along with depicting several peroxidases, dye-decolorizing peroxidases, laccases, carbohydrate esterases, and lignocellulosic auxiliary (redox) activities, the major pathways related to aromatic degradation were identified, including benzoate (or methylbenzoate) degradation to catechol (or methylcatechol), catechol ortho-cleavage, catechol meta-cleavage, and phthalate degradation. A novel Paenarthrobacter strain harboring eight gene clusters related to aromatic degradation was isolated from LigMet and was able to grow on lignin as major carbon source. Furthermore, a recombinant pathway for vanillin production was designed based on novel gene sequences coding for a feruloyl-CoA synthetase and an enoyl-CoA hydratase/aldolase retrieved from the metagenomic data set. The enrichment protocol described in the present study was successful for a microbial consortium establishment towards the lignin and aromatic metabolism, providing pathways and enzyme sets for synthetic biology engineering approaches. This work represents a pioneering study on lignin conversion and valorization strategies based on metagenomics, revealing several novel lignin conversion enzymes, aromatic-degrading bacterial genomes, and a novel bacterial strain of potential biotechnological interest. The validation of a biosynthetic route for vanillin synthesis confirmed the applicability of the targeted metagenome discovery approach for lignin valorization strategies.

An updated review on use of tomato pomace and crustacean processing waste to recover commercially vital carotenoids.

PubMed

Saini, Ramesh Kumar; Moon, So Hyun; Keum, Young-Soo

2018-06-01

Globally, the amount of food processing waste has become a major concern for environmental sustainability. The valorization of these waste materials can solve the problems of its disposal. Notably, the tomato pomace and crustacean processing waste presents enormous opportunities for the extraction of commercially vital carotenoids, lycopene, and astaxanthin, which have diverse applications in the food, feed, pharmaceuticals, and cosmetic industries. Moreover, such waste can generate surplus revenue which can significantly improve the economics of food production and processing. Considering these aspects, many reports have been published on the efficient use of tomato and crustacean processing waste to recover lycopene and astaxanthin. The current review provides up-to-date information available on the chemistry of lycopene and astaxanthin, their extraction methods that use environmentally friendly green solvents to minimize the impact of toxic chemical solvents on health and environment. Future research challenges in this context are also identified. Copyright © 2018 Elsevier Ltd. All rights reserved.

Innovative approach for the valorization of useful metals from waste electric and electronic equipment (WEEE)

NASA Astrophysics Data System (ADS)

Soare, V.; Burada, M.; Dumitrescu, D. V.; Constantin, I.; Soare, V.; Popescu, A.-M. J.; Carcea, I.

2016-08-01

Waste electric and electronic equipment are an important secondary source of rare and precious metals and their processing through ecological technologies constitutes a major concern in the European Union and significantly contributes to the reduction of environmental pollution and to the preservation of valuable resources of nonferrous metals. The paper presents an innovative approach for the complex valorization of useful metals contained in WEEE. The method consists in the melting of WEEE in a furnace in a microwave field at temperatures of 1000 ÷1200°C, for the complete separation of the metallic fraction from the organic components. The gases resulting from the melting process were also treated/neutralized in a microwave environment and the obtained metallic bulk (multi-component alloy) was processed through combined hydrometallurgical and electrochemical methods. The major elements in the metallic bulk (Cu, Sn, Zn, Pb) were separated/recovered by anodic dissolution, respectively by leaching in nitric acid followed by cementation using various agents, or by electrodeposition. Depending on the electrochemical parameters, cathodic deposits consisting of Cu, with a purity higher than 99.9%, or of Cu-Sn and Cu-Sn-Zn alloys were obtained. Silver was valorized by leaching/precipitation with NaCl and the gold concentrated in the anodic slime will be recovered by thiourea extraction. The experiments performed demonstrate the possibility of ecological and efficient processing of WEEE in a microwave field and the recovery of nonferrous and precious metals through combined hydrometallurgical and electrochemical methods.

Opportunities and challenges in biological lignin valorization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beckham, Gregg T.; Johnson, Christopher W.; Karp, Eric M.

Lignin is a primary component of lignocellulosic biomass that is an underutilized feedstock in the growing biofuels industry. Despite the fact that lignin depolymerization has long been studied, the intrinsic heterogeneity of lignin typically leads to heterogeneous streams of aromatic compounds, which in turn present significant technical challenges when attempting to produce lignin-derived chemicals where purity is often a concern. In Nature, microorganisms often encounter this same problem during biomass turnover wherein powerful oxidative enzymes produce heterogeneous slates of aromatics compounds. Some microbes have evolved metabolic pathways to convert these aromatic species via ‘upper pathways’ into central intermediates, which canmore » then be funneled through ‘lower pathways’ into central carbon metabolism in a process we dubbed ‘biological funneling’. This funneling approach offers a direct, biological solution to overcome heterogeneity problems in lignin valorization for the modern biorefinery. Coupled to targeted separations and downstream chemical catalysis, this concept offers the ability to produce a wide range of molecules from lignin. This perspective describes research opportunities and challenges ahead for this new field of research, which holds significant promise towards a biorefinery concept wherein polysaccharides and lignin are treated as equally valuable feedstocks. In particular, we discuss tailoring the lignin substrate for microbial utilization, host selection for biological funneling, ligninolytic enzyme–microbe synergy, metabolic engineering, expanding substrate specificity for biological funneling, and process integration, each of which presents key challenges. Ultimately, for biological solutions to lignin valorization to be viable, multiple questions in each of these areas will need to be addressed, making biological lignin valorization a multidisciplinary, co-design problem.« less

Life Science Start-up Activities at the Universities of Applied Sciences (UAS).

PubMed

Huber, Gerda

2014-12-01

The universities of applied sciences (UAS) provide several values for the society and economy of a country. Besides education of high level professionals, transfer of knowledge from research to applications in industry or as new start-up companies is an important task. This is done in different ways in the various disciplines. In Life Sciences, a key industry branch in Switzerland, innovation is a competitive success factor and research findings from UAS/Life Sciences contribute to the valorization of new technologies to products, services and to business performance. In order to foster awareness for the innovation need of industry, UAS install processes and support for transfer of research and technology results to marketable applications. Furthermore they may facilitate contacts of researchers and students with entrepreneurs in order to animate start-up founding as a true alternative to being employed. Access to coaching and entrepreneurial training completes the essential basis.

Study on the valorization routes of ashes from thermoelectric power plants working under mono-and co-combustion regimes

NASA Astrophysics Data System (ADS)

Barbosa, Rui Pedro Fernandes

The main objective of this thesis was to study new valorization routes of ashes produced in combustion and co-combustion processes. Three main valorization pathways were analyzed: (i)production of cement mortars, (ii) production of concretes, and (iii) use as chemical agents to remove contaminants from wastewaters. Firstly, the ashes produced during the mono-combustion of coal, co-combustion of coal and meat and bone meal (MBM), and mono-combustion of MBM were characterized. The aim of this study was to understand the ashes properties in extreme levels of substitution of coal by a residue with a high contamination of specific metals. The substitution of coal by MBM produced ashes with higher content of heavy metals. Secondly, the ashes coming from an industrial power plant working under mono-combustion(coal) and co-combustion conditions (coal+sewage sludge+MBM) were studied. The use of cofuels did not promote significant changes in the chemical and ecotoxicological properties of ashes. Fly ashes were successfully stabilized/solidified in cement mortar, and bottom and circulating ashes were successfully used as raw materials in concrete. The third step involved the characterization and valorization of biomass ashes resulting from the combustion of forestry residues. The highest concentrations of metals/metalloids were found in the lowest particle size fractions of ashes. Biomass ashes successfully substituted cement and natural aggregates in concretes, without compromising their mechanical, chemical, and ecotoxicological properties. Finally, the biomass ashes were tested as chemical agents to remove contaminants from wastewaters. The removal of P, mainly phosphates, and Pb from wastewaters was assayed. Biomass ashes presented a high capacity to remove phosphates. As fly ashes were more efficient in removing phosphates, they were further used to remove Pb from wastewaters. Again, they presented a high efficiency in Pb removal. New potential valorization routes for these ashes are now opened, contributing to improve their valorization rates.

Adsorptive removal of organics from aqueous phase by acid-activated coal fly ash: preparation, adsorption, and Fenton regenerative valorization of "spent" adsorbent.

PubMed

Wang, Nannan; Hao, Linlin; Chen, Jiaqing; Zhao, Qiang; Xu, Han

2018-05-01

Raw coal fly ash was activated to an adsorbent by sulfuric acid impregnation. The activation condition, the adsorption capacity, and the regenerative valorization of the adsorbent were studied. The results show that the optimal preparation conditions of the adsorbent are [H 2 SO 4 ] = 1 mol L -1 , activation time = 30 min, the ratio of coal fly ash to acid = 1:20 (g:mL), calcination temperature = 100 °C. The adsorption of p-nitrophenol on the adsorbent accords with the pseudo-second-order kinetic equation and the adsorption rate constant is 0.089 g mg -1  min -1 . The adsorption on this adsorbent can be considered enough after 35 min, when the corresponding adsorption capacity is 1.07 mg g -1 (85.6% of p-nitrophenol removal). Compared with raw coal fly ash, the adsorbent has a stable adsorption performance at low pH range (pH = 1-6) and the adsorption of p-nitrophenol is an exothermic process. Ninety minutes is required for the regenerative valorization of saturated adsorbent by Fenton process. The regenerative valorization for this saturated adsorbent can reach 89% under the optimal proposed conditions (30 °C, pH = 3, [H 2 O 2 ] = 5.0 mmol L -1 , [Fe 2+ ] = 5.5 mmol L -1 ). Within 15 experimental runs, the adsorbent has a better and better stability with the increase of experimental runs. Finally, the mechanism of activating coal fly ash is proposed, being verified by the results of the SEM and BET test.

Waking Up from Four Decades' Long Dream of Valorizing Agro-Food Byproducts: Toward Practical Applications of the Gained Knowledge.

PubMed

Domínguez-Perles, Raúl; Moreno, Diego A; García-Viguera, Cristina

2018-03-28

The late 1970s was the onset of literature about the first research outputs on alternatives to create added-value to agro-food byproducts focused on the reduction of the dependency on raw materials and, simultaneously, helping to reduce the environmental impacts of the agricultural activities. This trend, increased over the years and during the past decade, has been boosted by the growing concern of the socio-economic impact of wastes from agro-food activities, however, with little success of the proposed applications. Throughout four decades an array of studies have emerged, aimed to gain evidence on the relevance of innovation in the agro-food industry, as well as to overcome this situation. To our knowledge, only a few cases, summarized in the present perspective, represent the main alternatives currently available for the valorization of agro-food byproducts, with indications of some constraints that need to be addressed, in the coming years, to obtain a real profit from these products.

Lignin Valorization: Emerging Approaches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beckham, Gregg T

Lignin, an aromatic biopolymer found in plant cell walls, is a key component of lignocellulosic biomass and generally utilized for heat and power. However, lignin's chemical composition makes it an attractive source for biological and catalytic conversion to fuels and chemicals. Bringing together experts from biology, catalysis, engineering, analytical chemistry, and techno-economic/life-cycle analysis, Lignin Valorization presents a comprehensive, interdisciplinary picture of how lignocellulosic biorefineries could potentially employ lignin valorization technologies. Chapters will specifically focus on the production of fuels and chemicals from lignin and topics covered include (i) methods for isolating lignin in the context of the lignocellulosic biorefinery, (ii)more » thermal, chemo-catalytic, and biological methods for lignin depolymerization, (iii) chemo-catalytic and biological methods for upgrading lignin, (iv) characterization of lignin, and (v) techno-economic and life-cycle analysis of integrated processes to utilize lignin in an integrated biorefinery. The book provides the latest breakthroughs and challenges in upgrading lignin to fuels and chemicals for graduate students and researchers in academia, governmental laboratories, and industry interested in biomass conversion.« less

Performance of continuous stirred tank reactor (CSTR) on fermentative biohydrogen production from melon waste

NASA Astrophysics Data System (ADS)

Cahyari, K.; Sarto; Syamsiah, S.; Prasetya, A.

2016-11-01

This research was meant to investigate performance of continuous stirred tank reactor (CSTR) as bioreactor for producing biohydrogen from melon waste through dark fermentation method. Melon waste are commonly generated from agricultural processing stages i.e. cultivation, post-harvesting, industrial processing, and transportation. It accounted for more than 50% of total harvested fruit. Feedstock of melon waste was fed regularly to CSTR according to organic loading rate at value 1.2 - 3.6 g VS/ (l.d). Optimum condition was achieved at OLR 2.4 g VS/ (l.d) with the highest total gas volume 196 ml STP. Implication of higher OLR value is reduction of total gas volume due to accumulation of acids (pH 4.0), and lower substrate volatile solid removal. In summary, application of this method might valorize melon waste and generates renewable energy sources.

Simultaneous valorization and biocatalytic upgrading of heavy vacuum gas oil by the biosurfactant-producing Pseudomonas aeruginosa AK6U.

PubMed

Ismail, Wael Ahmed; Mohamed, Magdy El-Said; Awadh, Maysoon N; Obuekwe, Christian; El Nayal, Ashraf M

2017-11-01

Heavy vacuum gas oil (HVGO) is a complex and viscous hydrocarbon stream that is produced as the bottom side product from the vacuum distillation units in petroleum refineries. HVGO is conventionally treated with thermochemical process, which is costly and environmentally polluting. Here, we investigate two petroleum biotechnology applications, namely valorization and bioupgrading, as green approaches for valorization and upgrading of HVGO. The Pseudomonas aeruginosa AK6U strain grew on 20% v/v of HVGO as a sole carbon and sulfur source. It produced rhamnolipid biosurfactants in a growth-associated mode with a maximum crude biosurfactants yield of 10.1 g l -1 , which reduced the surface tension of the cell-free culture supernatant to 30.6 mN m -1 within 1 week of incubation. The rarely occurring dirhamnolipid Rha-Rha-C 12 -C 12 dominated the congeners' profile of the biosurfactants produced from HVGO. Heavy vacuum gas oil was recovered from the cultures and abiotic controls and the maltene fraction was extracted for further analysis. Fractional distillation (SimDist) of the biotreated maltene fraction showed a relative decrease in the high-boiling heavy fuel fraction (BP 426-565 °C) concomitant with increase in the lighter distillate diesel fraction (BP 315-426 °C). Analysis of the maltene fraction revealed compositional changes. The number-average (Mn) and weight-average (Mw) molecular weights, as well as the absolute number of hydrocarbons and sulfur heterocycles were higher in the biotreated maltene fraction of HVGO. These findings suggest that HVGO can be potentially exploited as a carbon-rich substrate for production of the high-value biosurfactants by P. aeruginosa AK6U and to concomitantly improve/upgrade its chemical composition. © 2017 The Authors. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

A protocol for eliciting nonmaterial values through a cultural ecosystem services frame

PubMed Central

Gould, Rachelle K; Klain, Sarah C; Ardoin, Nicole M; Satterfield, Terre; Woodside, Ulalia; Hannahs, Neil; Daily, Gretchen C; Chan, Kai M

2015-01-01

Stakeholders’ nonmaterial desires, needs, and values often critically influence the success of conservation projects. These considerations are challenging to articulate and characterize, resulting in their limited uptake in management and policy. We devised an interview protocol designed to enhance understanding of cultural ecosystem services (CES). The protocol begins with discussion of ecosystem-related activities (e.g., recreation, hunting) and management and then addresses CES, prompting for values encompassing concepts identified in the Millennium Ecosystem Assessment (2005) and explored in other CES research. We piloted the protocol in Hawaii and British Columbia. In each location, we interviewed 30 individuals from diverse backgrounds. We analyzed results from the 2 locations to determine the effectiveness of the interview protocol in elucidating nonmaterial values. The qualitative and spatial components of the protocol helped characterize cultural, social, and ethical values associated with ecosystems in multiple ways. Maps and situational, or vignette-like, questions helped respondents articulate difficult-to-discuss values. Open-ended prompts allowed respondents to express a diversity of ecosystem-related values and proved sufficiently flexible for interviewees to communicate values for which the protocol did not explicitly probe. Finally, the results suggest that certain values, those mentioned frequently throughout the interview, are particularly salient for particular populations. The protocol can provide efficient, contextual, and place-based data on the importance of particular ecosystem attributes for human well-being. Qualitative data are complementary to quantitative and spatial assessments in the comprehensive representation of people's values pertaining to ecosystems, and this protocol may assist in incorporating values frequently overlooked in decision making processes. Un Protocolo para Obtener Valores No Materiales por medio de un Marco de Servicios Ambientales Culturales Resumen Los deseos, necesidades y valores no materiales de los accionistas influyen frecuentemente sobre el éxito de los proyectos de conservación. Estas consideraciones son difíciles de articular y caracterizar, lo que resulta en entendimiento limitado en el manejo y la política. Concebimos un protocolo de entrevista diseñado para mejorar el entendimiento de los servicios ambientales culturales (SAC). El protocolo inicia con la discusión de actividades relacionadas con ecosistemas (p. ej.: recreación, cacería) y manejo; después señala a los SAC, dando pie a los valores que encierran conceptos identificados en la Evaluación Ambiental del Milenio (2005) y explorado en otras investigaciones sobre SAC. Hicimos pruebas piloto del protocolo en Hawái y Columbia Británica. En cada localidad entrevistamos a 30 individuos de diversos entornos. Analizamos los resultados de las dos localidades para determinar la efectividad del protocolo de entrevista en la obtención de valores no materiales. Los componentes cualitativos y espaciales del protocolo nos ayudaron a caracterizar los valores culturales, sociales y éticos asociados con el ecosistema de múltiples maneras. Los mapas y las preguntas de situación, o de tipo viñeta, ayudaron a los encuestados a articular valores difíciles de discutir. Las preguntas abiertas permitieron a los encuestados expresar una diversidad de valores ambientales y demostraron ser suficientemente flexibles para que los encuestados comunicaran valores que el protocolo no buscaba explícitamente. Finalmente, los resultados sugieren que ciertos valores, aquellos mencionados frecuentemente en la entrevista, son particularmente prominentes para poblaciones particulares. El protocolo puede proporcionar datos eficientes, contextuales y basados en lugar sobre la importancia de atributos ambientales particulares para el bienestar humano. Los datos cualitativos son complementarios para las evaluaciones cuantitativas y espaciales en la representación comprensiva de los valores de los valores que pertenecen a los ecosistemas. Este protocolo puede ayudar a incorporar valores frecuentemente ignorados en el proceso de toma de decisiones. PMID:25354730

Treatment efficiency and economic feasibility of biological oxidation, membrane filtration and separation processes, and advanced oxidation for the purification and valorization of olive mill wastewater.

PubMed

Ioannou-Ttofa, L; Michael-Kordatou, I; Fattas, S C; Eusebio, A; Ribeiro, B; Rusan, M; Amer, A R B; Zuraiqi, S; Waismand, M; Linder, C; Wiesman, Z; Gilron, J; Fatta-Kassinos, D

2017-05-01

Olive mill wastewater (OMW) is a major waste stream resulting from numerous operations that occur during the production stages of olive oil. The resulting effluent contains various organic and inorganic contaminants and its environmental impact can be notable. The present work aims at investigating the efficiency of (i) jet-loop reactor with ultrafiltration (UF) membrane system (Jacto.MBR), (ii) solar photo-Fenton oxidation after coagulation/flocculation pre-treatment and (iii) integrated membrane filtration processes (i.e. UF/nanofiltration (NF)) used for the treatment of OMW. According to the results, the efficiency of the biological treatment was high, equal to 90% COD and 80% total phenolic compounds (TPh) removal. A COD removal higher than 94% was achieved by applying the solar photo-Fenton oxidation process as post-treatment of coagulation/flocculation of OMW, while the phenolic fraction was completely eliminated. The combined UF/NF process resulted in very high conductivity and COD removal, up to 90% and 95%, respectively, while TPh were concentrated in the NF concentrate stream (i.e. 93% concentration). Quite important is the fact that the NF concentrate, a valuable and polyphenol rich stream, can be further valorized in various industries (e.g. food, pharmaceutical, etc.). The above treatment processes were found also to be able to reduce the initial OMW phytotoxicity at greenhouse experiments; with the effluent stream of solar photo-Fenton process to be the least phytotoxic compared to the other treated effluents. A SWOT (Strength, Weakness, Opportunities, Threats) analysis was performed, in order to determine both the strengths of each technology, as well as the possible obstacles that need to overcome for achieving the desired levels of treatment. Finally, an economic evaluation of the tested technologies was performed in an effort to measure the applicability and viability of these systems at real scale; highlighting that the cost cannot be regarded as a 'cut off criterion', since the most cost-effective option in not always the optimum one. Copyright © 2017 Elsevier Ltd. All rights reserved.

Bioconversion of distillers’ grains hydrolysates to advanced biofuels by an Escherichia coli co-culture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Fang; Wu, Weihua; Tran-Gyamfi, Mary B.

Here, the first generation bioethanol production utilizes the starch fraction of maize, which accounts for approximately 60% of the ash-free dry weight of the grain. Scale-up of this technology for fuels applications has resulted in a massive supply of distillers’ grains with solubles (DGS) coproduct, which is rich in cellulosic polysaccharides and protein. It was surmised that DGS would be rapidly adopted for animal feed applications, however, this has not been observed based on inconsistency of the product stream and other logistics-related risks, especially toxigenic contaminants. Therefore, efficient valorization of DGS for production of petroleum displacing products will significantly improvemore » the techno-economic feasibility and net energy return of the established starch bioethanol process. In this study, we demonstrate ‘one-pot’ bioconversion of the protein and carbohydrate fractions of a DGS hydrolysate into C4 and C5 fusel alcohols through development of a microbial consortium incorporating two engineered Escherichia coli biocatalyst strains.« less

Bioconversion of distillers’ grains hydrolysates to advanced biofuels by an Escherichia coli co-culture

DOE PAGES

Liu, Fang; Wu, Weihua; Tran-Gyamfi, Mary B.; ...

2017-11-09

Here, the first generation bioethanol production utilizes the starch fraction of maize, which accounts for approximately 60% of the ash-free dry weight of the grain. Scale-up of this technology for fuels applications has resulted in a massive supply of distillers’ grains with solubles (DGS) coproduct, which is rich in cellulosic polysaccharides and protein. It was surmised that DGS would be rapidly adopted for animal feed applications, however, this has not been observed based on inconsistency of the product stream and other logistics-related risks, especially toxigenic contaminants. Therefore, efficient valorization of DGS for production of petroleum displacing products will significantly improvemore » the techno-economic feasibility and net energy return of the established starch bioethanol process. In this study, we demonstrate ‘one-pot’ bioconversion of the protein and carbohydrate fractions of a DGS hydrolysate into C4 and C5 fusel alcohols through development of a microbial consortium incorporating two engineered Escherichia coli biocatalyst strains.« less

Feruloyl esterases from Schizophyllum commune to treat food industry side-streams.

PubMed

Nieter, Annabel; Kelle, Sebastian; Linke, Diana; Berger, Ralf G

2016-11-01

Agro-industrial side-streams are abundant and renewable resources of hydroxycinnamic acids with potential applications as antioxidants and preservatives in the food, health, cosmetic, and pharmaceutical industries. Feruloyl esterases (FAEs) from Schizophyllum commune were functionally expressed in Pichia pastoris with extracellular activities of 6000UL(-1). The recombinant enzymes, ScFaeD1 and ScFaeD2, released ferulic acid from destarched wheat bran and sugar beet pectin. Overnight incubation of coffee pulp released caffeic (>60%), ferulic (>80%) and p-coumaric acid (100%) indicating applicability for the valorization of food processing wastes and enhanced biomass degradation. Based on substrate specificity profiling and the release of diferulates from destarched wheat bran, the recombinant FAEs were characterized as type D FAEs. ScFaeD1 and ScFaeD2 preferably hydrolyzed feruloylated saccharides with ferulic acid esterified to the O-5 position of arabinose residues and showed an unprecedented ability to hydrolyze benzoic acid esters. Copyright © 2016 Elsevier Ltd. All rights reserved.

An "If This, Then that" Formulation of Decisions Related to Social Role Valorization as a Better Way of Interpreting It to People

ERIC Educational Resources Information Center

Wolfensberger, Wolf

2011-01-01

Social Role Valorization is interpreted as a high-order empirical social science theory that informs people about the relation between the social roles that people hold and what happens to them as a result, and how to valorize (improve or defend) the social roles of people at risk of social devaluation. Because Social Role Valorization is not a…

Valorization of pellets from municipal WWTP sludge in lightweight clay ceramics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cusido, Joan A., E-mail: joan.antoni.cusido@upc.edu; Soriano, Cecilia

2011-06-15

A direct result of the growing number of municipal wastewater-treatment plants (WWTPs) has been an increase in the generation of large amounts of sewage sludge that requires environmentally acceptable final destination. To decrease the volume of sludge, a common technique is drying the sludge at a low temperature in rotary kilns. The result of this process is a granulated material consisting of dehydrated sludge pellets. After this treatment, this pelletized material becomes easier to manipulate, but it also becomes a more toxic waste, containing dangerous substances, mostly of the lipid type. At its final stage, this material is usually incinerated,more » used as a comburent material, used as an agricultural fertilizer, or used in the cement industry. Each application has its own problems and requires remediation measures from the safety and environmental viewpoints. In this study, we looked beyond these possible applications and analyzed the transformation of sewage sludge through a ceramization process into a material similar to expanded clays; we subsequently explored its uses in the building industry or in the agriculture industry, among others. Both the properties of the product material and the production method were characterized, and an environmental analysis was conducted. The new, lightweight material had a microstructure with open porosity and low thermal conductivity. Environmental characterization such as the leaching test revealed that undetectable amounts of hazardous metals from the sludge were present in the leachate after the sludge went through a thermal treatment, despite their initial presence (with the exception of vanadium, which could pose some restrictions on some of the proposed uses for the final product). Toxicity tests also showed negative results. The study of gaseous emissions during production revealed emissions factors similar to those during the production of conventional clay ceramics, although with higher organic emissions. As for conventional clay ceramics, industrial production would require the implementation of some type of air-depuration system. The results showed that the ceramization of sludge pellets is a promising valorization technique worth considering from both the economic and technological perspectives.« less

Valorization of pellets from municipal WWTP sludge in lightweight clay ceramics.

PubMed

Cusidó, Joan A; Soriano, Cecilia

2011-06-01

A direct result of the growing number of municipal wastewater-treatment plants (WWTPs) has been an increase in the generation of large amounts of sewage sludge that requires environmentally acceptable final destination. To decrease the volume of sludge, a common technique is drying the sludge at a low temperature in rotary kilns. The result of this process is a granulated material consisting of dehydrated sludge pellets. After this treatment, this pelletized material becomes easier to manipulate, but it also becomes a more toxic waste, containing dangerous substances, mostly of the lipid type. At its final stage, this material is usually incinerated, used as a comburent material, used as an agricultural fertilizer, or used in the cement industry. Each application has its own problems and requires remediation measures from the safety and environmental viewpoints. In this study, we looked beyond these possible applications and analyzed the transformation of sewage sludge through a ceramization process into a material similar to expanded clays; we subsequently explored its uses in the building industry or in the agriculture industry, among others. Both the properties of the product material and the production method were characterized, and an environmental analysis was conducted. The new, lightweight material had a microstructure with open porosity and low thermal conductivity. Environmental characterization such as the leaching test revealed that undetectable amounts of hazardous metals from the sludge were present in the leachate after the sludge went through a thermal treatment, despite their initial presence (with the exception of vanadium, which could pose some restrictions on some of the proposed uses for the final product). Toxicity tests also showed negative results. The study of gaseous emissions during production revealed emissions factors similar to those during the production of conventional clay ceramics, although with higher organic emissions. As for conventional clay ceramics, industrial production would require the implementation of some type of air-depuration system. The results showed that the ceramization of sludge pellets is a promising valorization technique worth considering from both the economic and technological perspectives. Copyright © 2011 Elsevier Ltd. All rights reserved.

Life cycle costing of food waste: A review of methodological approaches.

PubMed

De Menna, Fabio; Dietershagen, Jana; Loubiere, Marion; Vittuari, Matteo

2018-03-01

Food waste (FW) is a global problem that is receiving increasing attention due to its environmental and economic impacts. Appropriate FW prevention, valorization, and management routes could mitigate or avoid these effects. Life cycle thinking and approaches, such as life cycle costing (LCC), may represent suitable tools to assess the sustainability of these routes. This study analyzes different LCC methodological aspects and approaches to evaluate FW management and valorization routes. A systematic literature review was carried out with a focus on different LCC approaches, their application to food, FW, and waste systems, as well as on specific methodological aspects. The review consisted of three phases: a collection phase, an iterative phase with experts' consultation, and a final literature classification. Journal papers and reports were retrieved from selected databases and search engines. The standardization of LCC methodologies is still in its infancy due to a lack of consensus over definitions and approaches. Research on the life cycle cost of FW is limited and generally focused on FW management, rather than prevention or valorization of specific flows. FW prevention, valorization, and management require a consistent integration of LCC and Life Cycle Assessment (LCA) to avoid tradeoffs between environmental and economic impacts. This entails a proper investigation of methodological differences between attributional and consequential modelling in LCC, especially with regard to functional unit, system boundaries, multi-functionality, included cost, and assessed impacts. Further efforts could also aim at finding the most effective and transparent categorization of costs, in particular when dealing with multiple stakeholders sustaining costs of FW. Interpretation of results from LCC of FW should take into account the effect on larger economic systems. Additional key performance indicators and analytical tools could be included in consequential approaches. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Biodegradable alternative for removing toxic compounds from sugarcane bagasse hemicellulosic hydrolysates for valorization in biorefineries.

PubMed

Silva-Fernandes, T; Santos, J C; Hasmann, F; Rodrigues, R C L B; Izario Filho, H J; Felipe, M G A

2017-11-01

Among the major challenges for hemicellulosic hydrolysate application in fermentative processes, there is the presence of toxic compounds generated during the pretreatment of the biomass, which can inhibit microbial growth. Therefore, the development of efficient, biodegradable and cost-effective detoxification methods for lignocellulosic hydrolysates is crucial. In this work, two tannin-based biopolymers (called A and B) were tested in the detoxification of sugarcane bagasse hydrolysate for subsequent fermentation by Candida guilliermondii. The effects of biopolymer concentration, pH, temperature, and contact time were studied using a 2 4 experimental design for both biopolymers. Results revealed that the biopolymer concentration and the pH were the most significant factors in the detoxification step. Biopolymer A removed phenolics, 5-hydroxymethylfurfural, and nickel from the hydrolysate more efficiently than biopolymer B, while biopolymer B was efficient to remove chromium at 15% (v/v). Detoxification enhanced the fermentation of sugarcane bagasse hydrolysate, and the biopolymers showed different influences on the process. Copyright © 2017 Elsevier Ltd. All rights reserved.

A proposed new framework for valorization of geoheritage in Norway

NASA Astrophysics Data System (ADS)

Dahl, Rolv; Bergengren, Anna; Heldal, Tom

2015-04-01

The geological history of Norway is a complex one, . The exploitation of geological resources of different kinds has always provided the backbone of the Norwegian community. Nevertheless, the perception of geology and the geological processes that created the landscape is little appreciated, compared to bio-diversity and cultural heritage. Some geological localities play an important role in our perception and scientific understanding of the landscape. Other localities are, or could be, important tourist destinations. Other localities can in turn be important for geoscience education on all levels, whereas other plays a major role in the understanding of geodiversity and geoheritage and should be protected as natural monuments. A database based on old registrations has been compiled and a web mapping server is recently launched based on old and new registrations. However, no systematical classification and identification of important sites has been done for the last thirty years. We are now calling for a crowdsourcing process in the geological community in order to validate and valorize the registrations, as well as defining new points and areas of interest. Furthermore, we are developing a valorization system for these localities. The framework for this system is based on studies from inventories in other countries, as well as suggestions from ProGeo. The aim is to raise awareness of important sites, and how they are treated and utilized for scientific, or educational purposes, as tourist destinations or heritage sites. Our presentation will focus on the development of the framework and its implications.

Predicting lignin depolymerization yields from quantifiable properties using fractionated biorefinery lignins

USDA-ARS?s Scientific Manuscript database

Lignin depolymerization to aromatic monomers with high yields and selectivity is essential for the economic feasibility of many lignin-valorization strategies within integrated biorefining processes. Importantly, the quality and properties of the lignin source play an essential role in impacting the...

Toward engineering E. coli with an autoregulatory system for lignin valorization

PubMed Central

Wu, Weihua; Liu, Fang; Singh, Seema

2018-01-01

Efficient lignin valorization could add more than 10-fold the value gained from burning it for energy and is critical for economic viability of future biorefineries. However, lignin-derived aromatics from biomass pretreatment are known to be potent fermentation inhibitors in microbial production of fuels and other value-added chemicals. In addition, isopropyl-β-d-1-thiogalactopyranoside and other inducers are routinely added into fermentation broth to induce the expression of pathway enzymes, which further adds to the overall process cost. An autoregulatory system that can diminish the aromatics’ toxicity as well as be substrate-inducible can be the key for successful integration of lignin valorization into future lignocellulosic biorefineries. Toward that goal, in this study an autoregulatory system is demonstrated that alleviates the toxicity issue and eliminates the cost of an external inducer. Specifically, this system is composed of a catechol biosynthesis pathway coexpressed with an active aromatic transporter CouP under induction by a vanillin self-inducible promoter, ADH7, to effectively convert the lignin-derived aromatics into value-added chemicals using Escherichia coli as a host. The constructed autoregulatory system can efficiently transport vanillin across the cell membrane and convert it to catechol. Compared with the system without CouP expression, the expression of catechol biosynthesis pathway with transporter CouP significantly improved the catechol yields about 30% and 40% under promoter pTrc and ADH7, respectively. This study demonstrated an aromatic-induced autoregulatory system that enabled conversion of lignin-derived aromatics into catechol without the addition of any costly, external inducers, providing a promising and economically viable route for lignin valorization. PMID:29500185

Review of Italian experience on automotive shredder residue characterization and management.

PubMed

Cossu, R; Fiore, S; Lai, T; Luciano, A; Mancini, G; Ruffino, B; Viotti, P; Zanetti, M C

2014-10-01

Automotive Shredder Residue (ASR) is a special waste that can be classified as either hazardous or non hazardous depending on the amount of hazardous substances and on the features of leachate gathered from EN12457/2 test. However both the strict regulation concerning landfills and the EU targets related to End-of-Life Vehicles (ELVs) recovery and recycling rate to achieve by 2015 (Directive 2000/53/EC), will limit current landfilling practice and will impose an increased efficiency of ELVs valorization. The present paper considers ELVs context in Italy, taking into account ASRs physical-chemical features and current processing practice, focusing on the enhancement of secondary materials recovery. The application in waste-to-energy plants, cement kilns or metallurgical processes is also analyzed, with a particular attention to the possible connected environmental impacts. Pyrolysis and gasification are considered as emerging technologies although the only use of ASR is debatable; its mixing with other waste streams is gradually being applied in commercial processes. The environmental impacts of the processes are acceptable, but more supporting data are needed and the advantage over (co-)incineration remains to be proven. Copyright © 2013 Elsevier Ltd. All rights reserved.

Deconstructing Normalisation: Clearing the Way for Inclusion.

ERIC Educational Resources Information Center

Culham, Andrew; Nind, Melanie

2003-01-01

This paper considers two major movements affecting the lives of people with intellectual disabilities: normalization and inclusion. It reviews the aims, processes, and outcomes of the normalization and social role valorization movement and explores its compatibility with inclusion. Lessons from normalization are applied to the inclusion movement.…

A "safe space" for learning and reflection: one school's design for continuity with a peer group across clinical clerkships.

PubMed

Chou, Calvin L; Johnston, C Bree; Singh, Bobby; Garber, Jonathan D; Kaplan, Elizabeth; Lee, Kewchang; Teherani, Arianne

2011-12-01

The value of continuity in medical education, particularly during clerkships, is increasingly recognized. Previous clerkship-based models have described changes that emphasize continuity in patient care, learner supervision, and curriculum. The creation of continuous student peer groups can foster interactions that enhance mutual support through uncomfortable professional transitions during the clerkship years. Here, the authors describe a third-year clerkship model based at the San Francisco Veterans Affairs (VA) Medical Center called VA Longitudinal Rotations (VALOR), designed explicitly to establish a supportive learning environment for small peer groups.Seven groups of medical students (42 total) completed VALOR across three academic years between 2007 and 2009. On clerkships during VALOR, one hour per week was designated for faculty-facilitated sessions amongst peer groups. Students' perceptions of peer group support and overall program satisfaction were determined with immediate post surveys and focus groups at the end of VALOR, and with follow-up surveys 5 to 27 months after completing VALOR. Students strongly valued several elements of VALOR peer groups, including support through clerkship challenges, meeting for facilitated reflection, and appreciating patient experiences across the continuum of care. Students' appreciation for their peer group experiences persisted well after the conclusion of VALOR. VALOR students performed the same as or better than traditional clerkship students on knowledge and skill-based outcomes. The authors demonstrate that their third-year clerkship program using peer groups has built supportive learning networks and facilitated reflection, allowing students to develop critical professional skills. Student communication around patient care was also feasible and highly valued.

High-Throughput Screening Assay for Laccase Engineering toward Lignosulfonate Valorization

PubMed Central

Rodríguez-Escribano, David; de Salas, Felipe; Camarero, Susana

2017-01-01

Lignin valorization is a pending issue for the integrated conversion of lignocellulose in consumer goods. Lignosulfonates (LS) are the main technical lignins commercialized today. However, their molecular weight should be enlarged to meet application requirements as additives or dispersing agents. Oxidation of lignosulfonates with fungal oxidoreductases, such as laccases, can increase the molecular weight of lignosulfonates by the cross-linking of lignin phenols. To advance in this direction, we describe here the development of a high-throughput screening (HTS) assay for the directed evolution of laccases, with lignosulfonate as substrate and the Folin–Ciocalteau reagent (FCR), to detect the decrease in phenolic content produced upon polymerization of lignosulfonate by the enzyme. Once the reaction conditions were adjusted to the 96-well-plate format, the enzyme for validating the assay was selected from a battery of high-redox-potential laccase variants functionally expressed in S. cerevisiae (the preferred host for the directed evolution of fungal oxidoreductases). The colorimetric response (absorbance at 760 nm) correlated with laccase activity secreted by the yeast. The HTS assay was reproducible (coefficient of variation (CV) = 15%) and sensitive enough to detect subtle differences in activity among yeast clones expressing a laccase mutant library obtained by error-prone PCR (epPCR). The method is therefore feasible for screening thousands of clones during the precise engineering of laccases toward valorization of lignosulfonates. PMID:28820431

High-Throughput Screening Assay for Laccase Engineering toward Lignosulfonate Valorization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rodriguez-Escribano, David; de Salas, Felipe; Pardo, Isabel

Lignin valorization is a pending issue for the integrated conversion of lignocellulose in consumer goods. Lignosulfonates (LS) are the main technical lignins commercialized today. However, their molecular weight should be enlarged to meet application requirements as additives or dispersing agents. Oxidation of lignosulfonates with fungal oxidoreductases, such as laccases, can increase the molecular weight of lignosulfonates by the cross-linking of lignin phenols. To advance in this direction, we describe here the development of a high-throughput screening (HTS) assay for the directed evolution of laccases, with lignosulfonate as substrate and the Folin-Ciocalteau reagent (FCR), to detect the decrease in phenolic contentmore » produced upon polymerization of lignosulfonate by the enzyme. Once the reaction conditions were adjusted to the 96-well-plate format, the enzyme for validating the assay was selected from a battery of high-redox-potential laccase variants functionally expressed in S. cerevisiae (the preferred host for the directed evolution of fungal oxidoreductases). The colorimetric response (absorbance at 760 nm) correlated with laccase activity secreted by the yeast. The HTS assay was reproducible (coefficient of variation (CV) = 15%) and sensitive enough to detect subtle differences in activity among yeast clones expressing a laccase mutant library obtained by error-prone PCR (epPCR). As a result, the method is therefore feasible for screening thousands of clones during the precise engineering of laccases toward valorization of lignosulfonates.« less

High-Throughput Screening Assay for Laccase Engineering toward Lignosulfonate Valorization

DOE PAGES

Rodriguez-Escribano, David; de Salas, Felipe; Pardo, Isabel; ...

2017-08-18

Lignin valorization is a pending issue for the integrated conversion of lignocellulose in consumer goods. Lignosulfonates (LS) are the main technical lignins commercialized today. However, their molecular weight should be enlarged to meet application requirements as additives or dispersing agents. Oxidation of lignosulfonates with fungal oxidoreductases, such as laccases, can increase the molecular weight of lignosulfonates by the cross-linking of lignin phenols. To advance in this direction, we describe here the development of a high-throughput screening (HTS) assay for the directed evolution of laccases, with lignosulfonate as substrate and the Folin-Ciocalteau reagent (FCR), to detect the decrease in phenolic contentmore » produced upon polymerization of lignosulfonate by the enzyme. Once the reaction conditions were adjusted to the 96-well-plate format, the enzyme for validating the assay was selected from a battery of high-redox-potential laccase variants functionally expressed in S. cerevisiae (the preferred host for the directed evolution of fungal oxidoreductases). The colorimetric response (absorbance at 760 nm) correlated with laccase activity secreted by the yeast. The HTS assay was reproducible (coefficient of variation (CV) = 15%) and sensitive enough to detect subtle differences in activity among yeast clones expressing a laccase mutant library obtained by error-prone PCR (epPCR). As a result, the method is therefore feasible for screening thousands of clones during the precise engineering of laccases toward valorization of lignosulfonates.« less

Valorization of Olive Mill Wastewater by Membrane Processes to Recover Natural Antioxidant Compounds for Cosmeceutical and Nutraceutical Applications or Functional Foods.

PubMed

Alfano, Alberto; Corsuto, Luisana; Finamore, Rosario; Savarese, Maria; Ferrara, Filomena; Falco, Salvatore; Santabarbara, Giuseppe; De Rosa, Mario; Schiraldi, Chiara

2018-05-23

Olive oil boasts numerous health benefits due to the high content of the monounsaturated fatty acid (MUFA) and functional bioactives including tocopherols, carotenoids, phospholipids, and polyphenolics with multiple biological activities. Polyphenolic components present antioxidant properties by scavenging free radicals and eliminating metabolic byproducts of metabolism. The objective of this research project was to recover the biologically active components rich in polyphenols, which include treatment of olive oil mills wastewater, and, at the same time, to remove the pollutant waste component resulting from the olive oil manufacturing processes. With specific focus on using technologies based on the application of ultra and nanofiltration membranes, the polyphenols fraction was extracted after an initial flocculation step. The nano-filtration permeate showed a reduction of about 95% of the organic load. The polyphenols recovery after two filtration steps was about 65% w / v . The nanofiltration retentate, dried using the spray dryer technique, was tested for cell viability after oxidative stress induction on human keratinocytes model in vitro and an improved cell reparation in the presence of this polyphenolic compound was demonstrated in scratch assays assisted through time lapse video-microscopy. The polyphenols recovered from these treatments may be suitable ingredients in cosmeceuticals and possibly nutraceutical preparations or functional foods.

Biomass production by novel strains of Yarrowia lipolytica using raw glycerol, derived from biodiesel production.

PubMed

Juszczyk, Piotr; Tomaszewska, Ludwika; Kita, Agnieszka; Rymowicz, Waldemar

2013-06-01

This study demonstrated the potential applicability of the isolated strains of Yarrowia lipolytica for the valorization of glycerol waste generated during biodiesel production, throughout biomass production. Twenty-one strains were isolated from different environments and identified as Y. lipolytica. Biomass production from pure glycerol (25 g L(-1)) was performed in the shake-flasks experiment. Eight strains with the best biomass production ability were chosen for studies in bioreactor (pH 3.5). The analysis of technological process parameters and biomass chemical composition demonstrated that S6 strain was the most suitable for biomass production. Its application allowed obtaining 11.7 and 12.3 g L(-1) of the biomass with 1.30 and 1.37 g L(-1) h(-1) productivity, respectively when pure and raw glycerol (25 g L(-1)) was used. In the yeast protein amino acid profile the contents of lysine, threonine and phenylalanine/tyrosine were higher than required by FAO/WHO. According to the EAAI, the nutritional value of the biomass reached up to 72.3%. Copyright © 2013 Elsevier Ltd. All rights reserved.

Toward engineering E. coli with an autoregulatory system for lignin valorization.

PubMed

Wu, Weihua; Liu, Fang; Singh, Seema

2018-03-20

Efficient lignin valorization could add more than 10-fold the value gained from burning it for energy and is critical for economic viability of future biorefineries. However, lignin-derived aromatics from biomass pretreatment are known to be potent fermentation inhibitors in microbial production of fuels and other value-added chemicals. In addition, isopropyl-β-d-1-thiogalactopyranoside and other inducers are routinely added into fermentation broth to induce the expression of pathway enzymes, which further adds to the overall process cost. An autoregulatory system that can diminish the aromatics' toxicity as well as be substrate-inducible can be the key for successful integration of lignin valorization into future lignocellulosic biorefineries. Toward that goal, in this study an autoregulatory system is demonstrated that alleviates the toxicity issue and eliminates the cost of an external inducer. Specifically, this system is composed of a catechol biosynthesis pathway coexpressed with an active aromatic transporter CouP under induction by a vanillin self-inducible promoter, ADH7, to effectively convert the lignin-derived aromatics into value-added chemicals using Escherichia coli as a host. The constructed autoregulatory system can efficiently transport vanillin across the cell membrane and convert it to catechol. Compared with the system without CouP expression, the expression of catechol biosynthesis pathway with transporter CouP significantly improved the catechol yields about 30% and 40% under promoter pTrc and ADH7, respectively. This study demonstrated an aromatic-induced autoregulatory system that enabled conversion of lignin-derived aromatics into catechol without the addition of any costly, external inducers, providing a promising and economically viable route for lignin valorization. Copyright © 2018 the Author(s). Published by PNAS.

Is phytoremediation without biomass valorization sustainable? - comparative LCA of landfilling vs. anaerobic co-digestion.

PubMed

Vigil, Miguel; Marey-Pérez, Manuel F; Martinez Huerta, Gemma; Álvarez Cabal, Valeriano

2015-02-01

This study examines the sustainability of phytoremediation for soils contaminated with heavy metals, especially the influence of management of the produced metal-enriched biomass on the environmental performance of the complete system. We examine a case study in Asturias (north of Spain), where the land was polluted with Pb by diffuse emissions from an adjacent steelmaking factory. A Phytoremediation scenario based on this case was assessed by performing a comparative life cycle assessment and by applying the multi-impact assessment method ReCiPe. Our Baseline scenario used the produced biomass as feedstock for an anaerobic digester that produces biogas, which is later upgraded cryogenically. The Baseline scenario was compared with two alternative scenarios: one considers depositing the produced biomass into landfill, and the other considers excavating the contaminated soil, disposing it in a landfill, and refilling the site with pristine soil. A sensitivity analysis was performed using different yields of biomass and biogas, and using different distances between site and biomass valorization/disposal center. Our results show that the impacts caused during agricultural activities and biomass valorization were compensated by the production of synthetic natural gas and the avoided impact of natural gas production. In addition, it was found that if the produced biomass was not valorized, the sustainability of phytoremediation is questionable. The distance between the site and the biomass processing center is not a major factor for determining the technology's sustainability, providing distances are less than 200-300 km. However, distance to landfill or to the source of pristine soil is a key factor when deciding to use phytoremediation or other ex-situ conventional remediation techniques. Copyright © 2014 Elsevier B.V. All rights reserved.

Anaerobes in Industrial- and Environmental Biotechnology.

PubMed

Hatti-Kaul, Rajni; Mattiasson, Bo

Anaerobic microorganisms present in diverse ecological niches employ alternative strategies for energy conservation in the absence of oxygen which enables them to play a key role in maintaining the global cycles of carbon, nitrogen, and sulfur, and the breakdown of persistent compounds. Thereby they become useful tools in industrial and environmental biotechnology. Although anaerobes have been relatively neglected in comparison to their aerobic counterparts, with increasing knowledge about their diversity and metabolic potential and the development of genetic tools and process technologies to utilize them, we now see a rapid expansion of their applications in the society. This chapter summarizes some of the developments in the use of anaerobes as tools for biomass valorization, in production of energy carriers and chemicals, wastewater treatment, and the strong potential in soil remediation. The ability of several autotrophic anaerobes to reduce carbon dioxide is attracting growing attention as a means for developing a platform for conversion of waste gases to chemicals, materials, and biofuels.

Towards a carbon-negative sustainable bio-based economy.

PubMed

Vanholme, Bartel; Desmet, Tom; Ronsse, Frederik; Rabaey, Korneel; Van Breusegem, Frank; De Mey, Marjan; Soetaert, Wim; Boerjan, Wout

2013-01-01

The bio-based economy relies on sustainable, plant-derived resources for fuels, chemicals, materials, food and feed rather than on the evanescent usage of fossil resources. The cornerstone of this economy is the biorefinery, in which renewable resources are intelligently converted to a plethora of products, maximizing the valorization of the feedstocks. Innovation is a prerequisite to move a fossil-based economy toward sustainable alternatives, and the viability of the bio-based economy depends on the integration between plant (green) and industrial (white) biotechnology. Green biotechnology deals with primary production through the improvement of biomass crops, while white biotechnology deals with the conversion of biomass into products and energy. Waste streams are minimized during these processes or partly converted to biogas, which can be used to power the processing pipeline. The sustainability of this economy is guaranteed by a third technology pillar that uses thermochemical conversion to valorize waste streams and fix residual carbon as biochar in the soil, hence creating a carbon-negative cycle. These three different multidisciplinary pillars interact through the value chain of the bio-based economy.

Towards a carbon-negative sustainable bio-based economy

PubMed Central

Vanholme, Bartel; Desmet, Tom; Ronsse, Frederik; Rabaey, Korneel; Breusegem, Frank Van; Mey, Marjan De; Soetaert, Wim; Boerjan, Wout

2013-01-01

The bio-based economy relies on sustainable, plant-derived resources for fuels, chemicals, materials, food and feed rather than on the evanescent usage of fossil resources. The cornerstone of this economy is the biorefinery, in which renewable resources are intelligently converted to a plethora of products, maximizing the valorization of the feedstocks. Innovation is a prerequisite to move a fossil-based economy toward sustainable alternatives, and the viability of the bio-based economy depends on the integration between plant (green) and industrial (white) biotechnology. Green biotechnology deals with primary production through the improvement of biomass crops, while white biotechnology deals with the conversion of biomass into products and energy. Waste streams are minimized during these processes or partly converted to biogas, which can be used to power the processing pipeline. The sustainability of this economy is guaranteed by a third technology pillar that uses thermochemical conversion to valorize waste streams and fix residual carbon as biochar in the soil, hence creating a carbon-negative cycle. These three different multidisciplinary pillars interact through the value chain of the bio-based economy. PMID:23761802

Pyrolysis for exploitation of biomasses selected for soil phytoremediation: Characterization of gaseous and solid products.

PubMed

Giudicianni, Paola; Pindozzi, Stefania; Grottola, Corinna Maria; Stanzione, Fernando; Faugno, Salvatore; Fagnano, Massimo; Fiorentino, Nunzio; Ragucci, Raffaele

2017-03-01

Biomasses to be used in the phytoremediation process are generally selected to match agronomic parameters and heavy metals uptake ability. A proper selection can be made greatly effective if knowledge of the properties of the residual char from pyrolysis is available to identify possible valorization routes. In this study a comparative analysis of the yields and characteristics of char obtained from slow pyrolysis of five uncontaminated biomasses (Populus nigra, Salix alba, Fraxinus oxyphylla, Eucalyptus occidentalis and Arundo donax) was carried out under steam atmosphere to better develop char porosity. Moreover, the dependence of the properties of solid residue on the process final temperature was studied for E. occidentalis in the temperature range of 688-967K. The results demonstrate that, among the studied biomasses, chars from P. nigra and E. occidentalis have to be preferred for applications regulated by surface phenomena given their highest surface area (270-300m 2 /g), whereas char from E. occidentalis is the best choice when the goal is to maximize energy recovery. Copyright © 2017 Elsevier Ltd. All rights reserved.

La utilizacion de los mapas conceptuales en la ensenanza de biologia y su efecto sobre el dominio del proceso de fotosintesis en los estudiantes universitarios

NASA Astrophysics Data System (ADS)

Gonzalez Rivera, Maria M.

Se investigo el efecto de los mapas conceptuales sobre el dominio del proceso de fotosintesis en estudiantes universitarios. La investigacion utilizo dos estrategias: mapas conceptuales individuales y mapas conceptuales colaborativos, con el fin de investigar si existen diferencias significativas en el dominio del proceso de fotosintesis. El analisis de los datos incluyo aspectos cualitativos y cuantitativos. Se desprende del estudio que el 80% de los estudiantes describen la utilizacion de los mapas conceptuales como una experiencia beneficiosa. El 70% de los estudiantes expreso que los mapas conceptuales son utiles en el aprendizaje del proceso de fotosintesis y el 61% indico que facilitan la comprension de los conceptos. Los hallazgos mas importantes del analisis cuantitativo indican que los estudiantes que utilizaron los mapas conceptuales mejoraron significativamente su desempeno en la posprueba global. Se utilizo la prueba Mann-Whitney para investigar si existian diferencias significativas en la posprueba y preprueba global, el valor de W = 1945.0, para un valor p de 0.00, lo cual establece diferencias significativas. Para determinar si existian diferencias significativas entre la posprueba y preprueba del grupo individual, se realizo la prueba nuevamente. El valor de W correspondio a 490.5, que es significativo, con un valor p de 0.00. Se concluye que existen diferencias significativas entre la ejecucion de la posprueba y preprueba del grupo individual. Los datos proveen suficiente evidencia para sostener que los estudiantes que utilizaron la estrategia de mapas conceptuales individuales mejoraron el dominio del proceso de fotosintesis significativamente. Se realizo nuevamente la prueba para los resultados de posprueba y preprueba del grupo colaborativo. El valor de W correspondio a 446 con un valor p de 0.00. Se concluyo que existen diferencias significativas entre la ejecucion de la posprueba y preprueba del grupo colaborativo. Finalmente, se efectuo una prueba Mann-Whitney comparando la posprueba de ambos grupos. El valor de W fue de a 777, para un valor p de 0.2782. Aunque las puntuaciones de las pospruebas del grupo colaborativo fueron mayores que las puntuaciones de la posprueba del grupo individual, la diferencia no fue estadisticamente significativa.

Microbial utilization of lignin: available biotechnologies for its degradation and valorization.

PubMed

Palazzolo, Martín A; Kurina-Sanz, Marcela

2016-10-01

Lignocellulosic biomasses, either from non-edible plants or from agricultural residues, stock biomacromolecules that can be processed to produce both energy and bioproducts. Therefore, they become major candidates to replace petroleum as the main source of energy. However, to shift the fossil-based economy to a bio-based one, it is imperative to develop robust biotechnologies to efficiently convert lignocellulosic streams in power and platform chemicals. Although most of the biomass processing facilities use celluloses and hemicelluloses to produce bioethanol and paper, there is no consolidated bioprocess to produce valuable compounds out of lignin at industrial scale available currently. Usually, lignin is burned to provide heat or it remains as a by-product in different streams, thus arising environmental concerns. In this way, the biorefinery concept is not extended to completion. Due to Nature offers an arsenal of biotechnological tools through microorganisms to accomplish lignin valorization or degradation, an increasing number of projects dealing with these tasks have been described recently. In this review, outstanding reports over the last 6 years are described, comprising the microbial utilization of lignin to produce a variety of valuable compounds as well as to diminish its ecological impact. Furthermore, perspectives on these topics are given.

Comparison of Overall Resource Consumption of Biosolids Management System Processes Using Exergetic Life Cycle Assessment.

PubMed

Alanya, Sevda; Dewulf, Jo; Duran, Metin

2015-08-18

This study focused on the evaluation of biosolids management systems (BMS) from a natural resource consumption point of view. Additionally, the environmental impact of the facilities was benchmarked using Life Cycle Assessment (LCA) to provide a comprehensive assessment. This is the first study to apply a Cumulative Exergy Extraction from the Natural Environment (CEENE) method for an in-depth resource use assessment of BMS where two full-scale BMS and seven system variations were analyzed. CEENE allows better system evaluation and understanding of how much benefit is achievable from the products generated by BMS, which have valorization potential. LCA results showed that environmental burden is mostly from the intense electricity consumption. The CEENE analysis further revealed that the environmental burden is due to the high consumption of fossil and nuclear-based natural resources. Using Cumulative Degree of Perfection, higher resource-use efficiency, 53%, was observed in the PTA-2 where alkaline stabilization rather than anaerobic digestion is employed. However, an anaerobic digestion process is favorable over alkaline stabilization, with 35% lower overall natural resource use. The most significant reduction of the resource footprint occurred when the output biogas was valorized in a combined heat and power system.

Application of the New Propulsion Theory to the Design of Propellers. Comparison with the Lifting Line Theory (Aplicacion de la Nueva Teoria de la Impulsion al Diseno de Propulsores. Comparacion con la Teoria de las Lineas Sustentadoras),

DTIC Science & Technology

1983-11-07

obtained with the lifting line theory is very sensitive to the type of radial distribution law of circulation. In the past, especially for theoretical...I. Bacquerizo Briones, "Utilidad de la educacion de Poincare para el proyecto y analisis de propulsores con valores finitos de la circulacion en el

Effect of Basicity on Basic Oxygen Furnace (BOF) Slag Solidification Microstructure and Mineralogy

NASA Astrophysics Data System (ADS)

Liu, Chunwei; Guo, Muxing; Pandelaers, Lieven; Blanpain, Bart; Huang, Shuigen

Slag valorization in added value construction applications can contribute substantially to the sustainability of steel industry. The present work aims to investigate the crystallization behavior of a typical industrial Basic Oxygen Furnace (BOF) slag (CaO-FeOx-SiO2-based slag) by varying the basicity through hot stage engineering. A sample of industry Basic Oxygen Slag (BOF) was mixed with different quantities of silica (SiO2) to modify basicity. The effect of basicity on solidification microstructure and mineralogy was studied. The results suggest that the mineralogy of the solidified slag can be manipulated to enhance its suitability as raw material for construction applications.

Optimization of extraction of bioactive compounds from different types of grape pomace produced at wineries and distilleries.

PubMed

Brazinha, Carla; Cadima, Mafalda; Crespo, João G

2014-06-01

Natural extracts obtained from grape pomace are particularly interesting, due to the substantial variety of valuable compounds present with health benefits, specifically phenolic compounds such as anthocyanins, trans-resveratrol, quercetin, and proanthocyanidins. The production of such extracts has been recognized as a profitable way to valorize grape byproducts, which are low-value and most abundant. First, the effect of the solvent on the extraction of bioactive compounds from grape pomace is studied. The selected solvents are water and ethanol, biocompatible and available in wineries and distilleries. Then, different types of grape pomace obtained along the various stages of current industrial winemaking and distillation processes are analyzed. As a result, the best stage of the winemaking and distillation processes for pomace valorization is identified, corresponding to the grape byproduct with the highest potential as source of bioactive compounds. These studies were performed with Vitis vinifera variety of Tempranillo grapes (same year, same vineyard). This work optimizes the production of natural extracts from (byproduct) grape pomace with recognized health benefits, to be used as high value nutraceuticals ingredients. The process proposed uses renewable and low-cost resources existent in wineries and distilleries. The select solvent extracting is a mixture of the biocompatible water and ethanol. The selected fermented grape pomace was chosen from different and comparable types of grape pomace obtained at current winemaking and distillation processes, to be used in extraction without any pretreatment. © 2014 Institute of Food Technologists®

Geodiversity of Georgia: valorization of geotouristic potential

NASA Astrophysics Data System (ADS)

Abramowicz, Anna

2017-04-01

Georgia, as a country with a high geodiversity, boasts an infinite variety of landscapes, wealth of geological formations and surface water systems. These attributes have a significant influence on the development of geo-touristic potential. The prevalence of geotourism can positively improve the situation in the country. Unfortunately, many interesting places are not sufficiently well utilized, which makes them difficult to access. There is also a failure to provide or disseminate information about these places to visitors. Various sources describe numerous locations, but none of them carry a full inventory or database of categorized objects. Inventory based on studies and field work helped to create categorized geosites in Georgia (including the occupied territories). Evidential cards with detailed descriptions were prepared for every cataloged object. Categorized geosites were used to carry out a valorisation of geotouristic objects and geodiversity evaluation by QGIS and ArcGIS. Valorization of geotouristic potential determined two regions with an exceptionally huge attractiveness and geodiversity on a national scale. Results of the evaluation and valorisation were visualised and presented as an application in ArcGIS Online platform.

Selective production of arenes via direct lignin upgrading over a niobium-based catalyst

PubMed Central

Shao, Yi; Xia, Qineng; Dong, Lin; Liu, Xiaohui; Han, Xue; Parker, Stewart F.; Cheng, Yongqiang; Daemen, Luke L.; Ramirez-Cuesta, Anibal J.; Yang, Sihai; Wang, Yanqin

2017-01-01

Lignin is the only large-volume renewable source of aromatic chemicals. Efficient depolymerization and deoxygenation of lignin while retaining the aromatic functionality are attractive but extremely challenging. Here we report the selective production of arenes via direct hydrodeoxygenation of organosolv lignin over a porous Ru/Nb2O5 catalyst that enabled the complete removal of the oxygen content from lignin. The conversion of birch lignin to monomer C7–C9 hydrocarbons is nearly quantitative based on its monomer content, with a total mass yield of 35.5 wt% and an exceptional arene selectivity of 71 wt%. Inelastic neutron scattering and DFT calculations confirm that the Nb2O5 support is catalytically unique compared with other traditional oxide supports, and the disassociation energy of Caromatic–OH bonds in phenolics is significantly reduced upon adsorption on Nb2O5, resulting in its distinct selectivity to arenes. This one-pot process provides a promising approach for improved lignin valorization with general applicability. PMID:28737172

Selective production of arenes via direct lignin upgrading over a niobium-based catalyst

NASA Astrophysics Data System (ADS)

Shao, Yi; Xia, Qineng; Dong, Lin; Liu, Xiaohui; Han, Xue; Parker, Stewart F.; Cheng, Yongqiang; Daemen, Luke L.; Ramirez-Cuesta, Anibal J.; Yang, Sihai; Wang, Yanqin

2017-07-01

Lignin is the only large-volume renewable source of aromatic chemicals. Efficient depolymerization and deoxygenation of lignin while retaining the aromatic functionality are attractive but extremely challenging. Here we report the selective production of arenes via direct hydrodeoxygenation of organosolv lignin over a porous Ru/Nb2O5 catalyst that enabled the complete removal of the oxygen content from lignin. The conversion of birch lignin to monomer C7-C9 hydrocarbons is nearly quantitative based on its monomer content, with a total mass yield of 35.5 wt% and an exceptional arene selectivity of 71 wt%. Inelastic neutron scattering and DFT calculations confirm that the Nb2O5 support is catalytically unique compared with other traditional oxide supports, and the disassociation energy of Caromatic-OH bonds in phenolics is significantly reduced upon adsorption on Nb2O5, resulting in its distinct selectivity to arenes. This one-pot process provides a promising approach for improved lignin valorization with general applicability.

Selective production of arenes via direct lignin upgrading over a niobium-based catalyst

DOE PAGES

Shao, Yi; Xia, Qineng; Dong, Lin; ...

2017-07-24

Lignin is the only large-volume renewable source of aromatic chemicals. Efficient depolymerization and deoxygenation of lignin while retaining the aromatic functionality are attractive but extremely challenging. Here we report the selective production of arenes via direct hydrodeoxygenation of organosolv lignin over a porous Ru/Nb 2O 5 catalyst that enabled the complete removal of the oxygen content from lignin. The conversion of birch lignin to monomer C7–C9 hydrocarbons is nearly quantitative based on its monomer content, with a total mass yield of 35.5 wt% and an exceptional arene selectivity of 71 wt%. Inelastic neutron scattering and DFT calculations confirm that themore » Nb 2O 5 support is catalytically unique compared with other traditional oxide supports, and the disassociation energy of Caromatic–OH bonds in phenolics is significantly reduced upon adsorption on Nb 2O 5, resulting in its distinct selectivity to arenes. This one-pot process provides a promising approach for improved lignin valorization with general applicability.« less

Selective production of arenes via direct lignin upgrading over a niobium-based catalyst

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shao, Yi; Xia, Qineng; Dong, Lin

Lignin is the only large-volume renewable source of aromatic chemicals. Efficient depolymerization and deoxygenation of lignin while retaining the aromatic functionality are attractive but extremely challenging. Here we report the selective production of arenes via direct hydrodeoxygenation of organosolv lignin over a porous Ru/Nb 2O 5 catalyst that enabled the complete removal of the oxygen content from lignin. The conversion of birch lignin to monomer C7–C9 hydrocarbons is nearly quantitative based on its monomer content, with a total mass yield of 35.5 wt% and an exceptional arene selectivity of 71 wt%. Inelastic neutron scattering and DFT calculations confirm that themore » Nb 2O 5 support is catalytically unique compared with other traditional oxide supports, and the disassociation energy of Caromatic–OH bonds in phenolics is significantly reduced upon adsorption on Nb 2O 5, resulting in its distinct selectivity to arenes. This one-pot process provides a promising approach for improved lignin valorization with general applicability.« less

Knowledge Transfer between SMEs and Higher Education Institutions: Differences between Universities and Colleges of Higher Education in the Netherlands

ERIC Educational Resources Information Center

Delfmann, Heike; Koster, Sierdjan

2012-01-01

Knowledge transfer (KT) between higher education institutions (HEIs) and businesses is seen as a key element of innovation in knowledge-driven economies: HEIs generate knowledge that can be adopted in the regional economy. This process of valorization has been studied extensively, mainly with a focus on universities. In the Netherlands, there is a…

Valorization of Palm Oil Industrial Waste as Feedstock for Lipase Production.

PubMed

Silveira, Erick A; Tardioli, Paulo W; Farinas, Cristiane S

2016-06-01

The use of residues from the industrial processing of palm oil as carbon source and inducer for microbial lipase production can be a way to add value to such residues and to contribute to reduced enzyme costs. The aim of this work was to investigate the feasibility of using palm oil industrial waste as feedstock for lipase production in different cultivation systems. Evaluation was made of lipase production by a selected strain of Aspergillus niger cultivated under solid-state (SSF) and submerged fermentation (SmF). Lipase activity levels up to 15.41 IU/mL were achieved under SSF. The effects of pH and temperature on the lipase activity of the SSF extract were evaluated using statistical design methodology, and maximum activities were obtained between pH 4.0 and 6.5 and at temperatures between 37 and 55 °C. This lipase presented good thermal stability up to 60 °C and higher specificity towards long carbon chain substrates. The results demonstrate the potential application of palm oil industrial residues for lipase production and contribute to the technological advances needed to develop processes for industrial enzymes production.

Recycling of waste automotive laminated glass and valorization of polyvinyl butyral through mechanochemical separation.

PubMed

Swain, Basudev; Ryang Park, Jae; Yoon Shin, Dong; Park, Kyung-Soo; Hwan Hong, Myung; Gi Lee, Chan

2015-10-01

Due to strong binding, optical clarity, adhesion to many surfaces, toughness and flexibility polyvinyl butyral (PVB) resin films are commonly used in the automotive and architectural application as a protective interlayer in the laminated glass. Worldwide million tons of PVB waste generated from end-of-life automotive associated with various environmental issues. Stringent environmental directive, higher land cost eliminates land filling option, needs a study, we have developed a mechanochemical separation process to separate PVB resins from glass and characterized the separated PVB through various techniques, i.e., scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), infrared spectroscopy (IR) and nuclear magnetic resonance spectroscopy (NMR). Commercial nonionic surfactants D201 used for the mechanochemical separation purpose. Through parameter optimization following conditions are considered to be the optimum condition; 30v ol% D201, stirring speed of 400 rpm, 35 °C temperature, operation time 1h, and dilute D201 volume to waste automotive laminated glass weight ratio of ≈25. The technology developed in our laboratory is sustainable, environmentally friendly, techno-economical feasible process, capable of mass production (recycling). Copyright © 2015 Elsevier Inc. All rights reserved.

Direct fermentation of potato starch and potato residues to lactic acid by Geobacillus stearothermophilus under non-sterile conditions.

PubMed

Smerilli, Marina; Neureiter, Markus; Wurz, Stefan; Haas, Cornelia; Frühauf, Sabine; Fuchs, Werner

2015-04-01

Lactic acid is an important biorefinery platform chemical. The use of thermophilic amylolytic microorganisms to produce lactic acid by fermentation constitutes an efficient strategy to reduce operating costs, including raw materials and sterilization costs. A process for the thermophilic production of lactic acid by Geobacillus stearothermophilus directly from potato starch was characterized and optimized. Geobacillus stearothermophilus DSM 494 was selected out of 12 strains screened for amylolytic activity and the ability to form lactic acid as the major product of the anaerobic metabolism. In total more than 30 batches at 3-l scale were run at 60 °C under non-sterile conditions. The process developed produced 37 g L -1 optically pure (98%) L-lactic acid in 20 h from 50 g L -1 raw potato starch. As co-metabolites smaller amounts (<7% w/v) of acetate, formate and ethanol were formed. Yields of lactic acid increased from 66% to 81% when potato residues from food processing were used as a starchy substrate in place of raw potato starch. Potato starch and residues were successfully converted to lactic acid by G. stearothermophilus . The process described in this study provides major benefits in industrial applications and for the valorization of starch-rich waste streams. © 2015 The Authors. Journal of Chemical Technology & Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Aqueous stream characterization from biomass fast pyrolysis and catalytic fast pyrolysis

DOE PAGES

Black, Brenna A.; Michener, William E.; Ramirez, Kelsey J.; ...

2016-09-05

Here, biomass pyrolysis offers a promising means to rapidly depolymerize lignocellulosic biomass for subsequent catalytic upgrading to renewable fuels. Substantial efforts are currently ongoing to optimize pyrolysis processes including various fast pyrolysis and catalytic fast pyrolysis schemes. In all cases, complex aqueous streams are generated containing solubilized organic compounds that are not converted to target fuels or chemicals and are often slated for wastewater treatment, in turn creating an economic burden on the biorefinery. Valorization of the species in these aqueous streams, however, offers significant potential for substantially improving the economics and sustainability of thermochemical biorefineries. To that end, heremore » we provide a thorough characterization of the aqueous streams from four pilot-scale pyrolysis processes: namely, from fast pyrolysis, fast pyrolysis with downstream fractionation, in situ catalytic fast pyrolysis, and ex situ catalytic fast pyrolysis. These configurations and processes represent characteristic pyrolysis processes undergoing intense development currently. Using a comprehensive suite of aqueous-compatible analytical techniques, we quantitatively characterize between 12 g kg -1 of organic carbon of a highly aqueous catalytic fast pyrolysis stream and up to 315 g kg -1 of organic carbon present in the fast pyrolysis aqueous streams. In all cases, the analysis ranges between 75 and 100% of mass closure. The composition and stream properties closely match the nature of pyrolysis processes, with high contents of carbohydrate-derived compounds in the fast pyrolysis aqueous phase, high acid content in nearly all streams, and mostly recalcitrant phenolics in the heavily deoxygenated ex situ catalytic fast pyrolysis stream. Overall, this work provides a detailed compositional analysis of aqueous streams from leading thermochemical processes -- analyses that are critical for subsequent development of selective valorization strategies for these waste streams.« less

Aqueous stream characterization from biomass fast pyrolysis and catalytic fast pyrolysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Black, Brenna A.; Michener, William E.; Ramirez, Kelsey J.

Here, biomass pyrolysis offers a promising means to rapidly depolymerize lignocellulosic biomass for subsequent catalytic upgrading to renewable fuels. Substantial efforts are currently ongoing to optimize pyrolysis processes including various fast pyrolysis and catalytic fast pyrolysis schemes. In all cases, complex aqueous streams are generated containing solubilized organic compounds that are not converted to target fuels or chemicals and are often slated for wastewater treatment, in turn creating an economic burden on the biorefinery. Valorization of the species in these aqueous streams, however, offers significant potential for substantially improving the economics and sustainability of thermochemical biorefineries. To that end, heremore » we provide a thorough characterization of the aqueous streams from four pilot-scale pyrolysis processes: namely, from fast pyrolysis, fast pyrolysis with downstream fractionation, in situ catalytic fast pyrolysis, and ex situ catalytic fast pyrolysis. These configurations and processes represent characteristic pyrolysis processes undergoing intense development currently. Using a comprehensive suite of aqueous-compatible analytical techniques, we quantitatively characterize between 12 g kg -1 of organic carbon of a highly aqueous catalytic fast pyrolysis stream and up to 315 g kg -1 of organic carbon present in the fast pyrolysis aqueous streams. In all cases, the analysis ranges between 75 and 100% of mass closure. The composition and stream properties closely match the nature of pyrolysis processes, with high contents of carbohydrate-derived compounds in the fast pyrolysis aqueous phase, high acid content in nearly all streams, and mostly recalcitrant phenolics in the heavily deoxygenated ex situ catalytic fast pyrolysis stream. Overall, this work provides a detailed compositional analysis of aqueous streams from leading thermochemical processes -- analyses that are critical for subsequent development of selective valorization strategies for these waste streams.« less

Valorization of residual Empty Palm Fruit Bunch Fibers (EPFBF) by microfluidization: production of nanofibrillated cellulose and EPFBF nanopaper.

PubMed

Ferrer, Ana; Filpponen, Ilari; Rodríguez, Alejandro; Laine, Janne; Rojas, Orlando J

2012-12-01

Different cellulose pulps were produced from sulfur-free chemical treatments of Empty Palm Fruit Bunch Fibers (EPFBF), a by-product from palm oil processing. The pulps were microfluidized for deconstruction into nanofibrillated cellulose (NFC) and nanopaper was manufactured by using an overpressure device. The morphological and structural features of the obtained NFCs were characterized via atomic force and scanning electron microscopies. The physical properties as well as the interactions with water of sheets from three different pulps were compared with those of nanopaper obtained from the corresponding NFC. Distinctive chemical and morphological characteristics and ensuing nanopaper properties were generated by the EPFBF fibers. The NFC grades obtained compared favorably with associated materials typically produced from bleached wood fibers. Lower water absorption, higher tensile strengths (107-137 MPa) and elastic modulus (12-18 GPa) were measured, which opens the possibility for valorization of such widely available bioresource. Copyright © 2012 Elsevier Ltd. All rights reserved.

Valorization of winery waste vs. the costs of not recycling.

PubMed

Devesa-Rey, R; Vecino, X; Varela-Alende, J L; Barral, M T; Cruz, J M; Moldes, A B

2011-11-01

Wine production generates huge amounts of waste. Before the 1990s, the most economical option for waste removal was the payment of a disposal fee usually being of around 3000 Euros. However, in recent years the disposal fee and fines for unauthorized discharges have increased considerably, often reaching 30,000-40,000 Euros, and a prison sentence is sometimes also imposed. Some environmental friendly technologies have been proposed for the valorization of winery waste products. Fermentation of grape marc, trimming vine shoot or vinification lees has been reported to produce lactic acid, biosurfactants, xylitol, ethanol and other compounds. Furthermore, grape marc and seeds are rich in phenolic compounds, which have antioxidants properties, and vinasse contains tartaric acid that can be extracted and commercialized. Companies must therefore invest in new technologies to decrease the impact of agro-industrial residues on the environment and to establish new processes that will provide additional sources of income. Copyright © 2011 Elsevier Ltd. All rights reserved.

High impact biowastes from South European agro-industries as feedstock for second-generation biorefineries.

PubMed

Scoma, Alberto; Rebecchi, Stefano; Bertin, Lorenzo; Fava, Fabio

2016-01-01

Availability of bio-based chemicals, materials and energy at reasonable cost will be one of the forthcoming issues for the EU economy. In particular, the development of technologies making use of alternative resources to fossil fuels is encouraged by the current European research and innovation strategy to face the societal challenge of natural resource scarcity, fossil resource dependence and sustainable economic growth. In this respect, second- generation biorefineries, i.e. biorefineries fed with biowastes, appear to be good candidates to substitute and replace the present downstream processing scheme. Contrary to first-generation biorefineries, which make use of dedicated crops or primary cultivations to achieve such a goal, the former employ agricultural, industrial, zootechnical, fishery and forestry biowastes as the main feedstock. This leaves aside any ethical and social issue generated by first-generation approaches, and concomitantly prevents environmental and economical issues associated with the disposal of the aforementioned leftovers. Unfortunately, to date, a comprehensive and updated mapping of the availability and potential use of bioresources for second-generation biorefineries in Europe is missing. This is a lack that severely limits R&D and industrial applications in the sector. On the other hand, attempts at valorizing the most diverse biowastes dates back to the nineteenth century and plenty of information in the literature on their sustainable exploitation is available. However, the large majority of these investigations have been focused on single fractions of biowastes or single steps of biowaste processing, preventing considerations on an integrated and modular (cascade) approach for the whole valorization of organic leftovers. This review aims at addressing these issues by gathering recent data on (a) some of the main high-impact biowastes located in Europe and in particular in its Southern part, and (b) the bio-based chemicals, materials and fuels that can be produced from such residues. In particular, we focused on those key compounds referred to as "chemical platforms", which have been indicated as fundamental to generate the large majority of the industrially relevant goods to date.

Public health and valorization of genome-based technologies: a new model.

PubMed

Lal, Jonathan A; Schulte In den Bäumen, Tobias; Morré, Servaas A; Brand, Angela

2011-12-05

The success rate of timely translation of genome-based technologies to commercially feasible products/services with applicability in health care systems is significantly low. We identified both industry and scientists neglect health policy aspects when commercializing their technology, more specifically, Public Health Assessment Tools (PHAT) and early on involvement of decision makers through which market authorization and reimbursements are dependent. While Technology Transfer (TT) aims to facilitate translation of ideas into products, Health Technology Assessment, one component of PHAT, for example, facilitates translation of products/processes into healthcare services and eventually comes up with recommendations for decision makers. We aim to propose a new model of valorization to optimize integration of genome-based technologies into the healthcare system. The method used to develop our model is an adapted version of the Fish Trap Model and the Basic Design Cycle. We found although different, similarities exist between TT and PHAT. Realizing the potential of being mutually beneficial justified our proposal of their relative parallel initiation. We observed that the Public Health Genomics Wheel should be included in this relative parallel activity to ensure all societal/policy aspects are dealt with preemptively by both stakeholders. On further analysis, we found out this whole process is dependent on the Value of Information. As a result, we present our LAL (Learning Adapting Leveling) model which proposes, based on market demand; TT and PHAT by consultation/bi-lateral communication should advocate for relevant technologies. This can be achieved by public-private partnerships (PPPs). These widely defined PPPs create the innovation network which is a developing, consultative/collaborative-networking platform between TT and PHAT. This network has iterations and requires learning, assimilating and using knowledge developed and is called absorption capacity. We hypothesize that the higher absorption capacity, higher success possibility. Our model however does not address the phasing out of technology although we believe the same model can be used to simultaneously phase out a technology. This model proposes to facilitate optimization/decrease the timeframe of integration in healthcare. It also helps industry and researchers to come to a strategic decision at an early stage, about technology being developed thus, saving on resources, hence minimizing failures.

Pose tracking for augmented reality applications in outdoor archaeological sites

NASA Astrophysics Data System (ADS)

Younes, Georges; Asmar, Daniel; Elhajj, Imad; Al-Harithy, Howayda

2017-01-01

In recent years, agencies around the world have invested huge amounts of effort toward digitizing many aspects of the world's cultural heritage. Of particular importance is the digitization of outdoor archaeological sites. In the spirit of valorization of this digital information, many groups have developed virtual or augmented reality (AR) computer applications themed around a particular archaeological object. The problem of pose tracking in outdoor AR applications is addressed. Different positional systems are analyzed, resulting in the selection of a monocular camera-based user tracker. The limitations that challenge this technique from map generation, scale, anchoring, to lighting conditions are analyzed and systematically addressed. Finally, as a case study, our pose tracking system is implemented within an AR experience in the Byblos Roman theater in Lebanon.

A comprehensive dairy valorization model.

PubMed

Banaszewska, A; Cruijssen, F; van der Vorst, J G A J; Claassen, G D H; Kampman, J L

2013-02-01

Dairy processors face numerous challenges resulting from both unsteady dairy markets and some specific characteristics of dairy supply chains. To maintain a competitive position on the market, companies must look beyond standard solutions currently used in practice. This paper presents a comprehensive dairy valorization model that serves as a decision support tool for mid-term allocation of raw milk to end products and production planning. The developed model was used to identify the optimal product portfolio composition. The model allocates raw milk to the most profitable dairy products while accounting for important constraints (i.e., recipes, composition variations, dairy production interdependencies, seasonality, demand, supply, capacities, and transportation flows). The inclusion of all relevant constraints and the ease of understanding dairy production dynamics make the model comprehensive. The developed model was tested at the international dairy processor FrieslandCampina (Amersfoort, the Netherlands). The structure of the model and its output were discussed in multiple sessions with and approved by relevant FrieslandCampina employees. The elements included in the model were considered necessary to optimally valorize raw milk. To illustrate the comprehensiveness and functionality of the model, we analyzed the effect of seasonality on milk valorization. A large difference in profit and a shift in the allocation of milk showed that seasonality has a considerable impact on the valorization of raw milk. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent.

PubMed

Georgakopoulos, Evangelos; Santos, Rafael M; Chiang, Yi Wai; Manovic, Vasilije

2017-02-21

The aim of this work is to present a zero-waste process for storing CO2 in a stable and benign mineral form while producing zeolitic minerals with sufficient heavy metal adsorption capacity. To this end, blast furnace slag, a residue from iron-making, is utilized as the starting material. Calcium is selectively extracted from the slag by leaching with acetic acid (2 M CH3COOH) as the extraction agent. The filtered leachate is subsequently physico-chemically purified and then carbonated to form precipitated calcium carbonate (PCC) of high purity (<2 wt% non-calcium impurities, according to ICP-MS analysis). Sodium hydroxide is added to neutralize the regenerated acetate. The morphological properties of the resulting calcitic PCC are tuned for its potential application as a filler in papermaking. In parallel, the residual solids from the extraction stage are subjected to hydrothermal conversion in a caustic solution (2 M NaOH) that leads to the predominant formation of a particular zeolitic mineral phase (detected by XRD), namely analcime (NaAlSi2O6∙H2O). Based on its ability to adsorb Ni 2+ , as reported from batch adsorption experiments and ICP-OES analysis, this product can potentially be used in wastewater treatment or for environmental remediation applications.

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent

PubMed Central

Georgakopoulos, Evangelos; Santos, Rafael M.; Chiang, Yi Wai; Manovic, Vasilije

2017-01-01

The aim of this work is to present a zero-waste process for storing CO2 in a stable and benign mineral form while producing zeolitic minerals with sufficient heavy metal adsorption capacity. To this end, blast furnace slag, a residue from iron-making, is utilized as the starting material. Calcium is selectively extracted from the slag by leaching with acetic acid (2 M CH3COOH) as the extraction agent. The filtered leachate is subsequently physico-chemically purified and then carbonated to form precipitated calcium carbonate (PCC) of high purity (<2 wt% non-calcium impurities, according to ICP-MS analysis). Sodium hydroxide is added to neutralize the regenerated acetate. The morphological properties of the resulting calcitic PCC are tuned for its potential application as a filler in papermaking. In parallel, the residual solids from the extraction stage are subjected to hydrothermal conversion in a caustic solution (2 M NaOH) that leads to the predominant formation of a particular zeolitic mineral phase (detected by XRD), namely analcime (NaAlSi2O6∙H2O). Based on its ability to adsorb Ni2+, as reported from batch adsorption experiments and ICP-OES analysis, this product can potentially be used in wastewater treatment or for environmental remediation applications. PMID:28287605

Analysis of good practices, barriers and drivers for ELTs pyrolysis industrial application.

PubMed

Zabaniotou, A; Antoniou, N; Bruton, G

2014-11-01

Boosting of eco-innovative solutions for End of Life Tyres (ELTs) management, under the principles of the EU Resource Efficiency Roadmap and the Waste Framework Directive, can not only diminish the environmental hazards and the consequent societal cost, but also result to the establishment of a novel perception regarding ELTs; thus, a valuable stock of resources that can be exploited. Despite the extensive scientific research of the previous years on ELTs depolymerisation via pyrolysis highlighting its eco-innovative characteristics, the use of pyrolysis to process scrap tyres has not yet achieved a broad commercial success, with economic viability and product standardization to constitute the primary impediments. More specifically, pyrolysis was not applied to an extensive industrial scale so far, due to deficient market analysis, legislative barriers, economic instability and sometimes public acceptance. All the above issues are addressed by the present study. Modifications on current EU legislation can prevent or reduce delays or derailment of efforts on pyrolysis, through its differentiation from incineration. The attainment of economic viability could be realized through the valorization of the pyrolytic char towards activated carbon production for environmental depollution applications; needless to say, the penetration on niche and well-organised markets is more than essential. Copyright © 2014 Elsevier Ltd. All rights reserved.

Valor Collegiate Academies

ERIC Educational Resources Information Center

EDUCAUSE, 2015

2015-01-01

The four guiding principles behind the blended, competency-based, personalized learning model of Valor Collegiate Academies, a charter organization serving grades 5-12 in Nashville, TN: (1) Reflect the diversity of both our country and local community; (2) Personalize a student's experience to meet his/her unique academic and non-academic needs;…

The Top Three Valor Awards and the United States Marine Corps: A Study from World War I to Present Day Iraq and Afghanistan

DTIC Science & Technology

2014-06-13

the Medal of Honor.85 “The process by which the MOH is awarded has become flawed, and the DOD must strive to bring an end to an era of overprotection ...later in the literature review. 84Ibid., 37. 85Wes J. Deaver, “The Medal of Honor, An Era of Overprotection ,” Marine Corps Gazette 94, no. 9

Valorization of Proteins from Co- and By-Products from the Fish and Meat Industry.

PubMed

Aspevik, Tone; Oterhals, Åge; Rønning, Sissel Beate; Altintzoglou, Themistoklis; Wubshet, Sileshi Gizachew; Gildberg, Asbjørn; Afseth, Nils Kristian; Whitaker, Ragnhild Dragøy; Lindberg, Diana

2017-06-01

Large volumes of protein-rich residual raw materials, such as heads, bones, carcasses, blood, skin, viscera, hooves and feathers, are created as a result of processing of animals from fisheries, aquaculture, livestock and poultry sectors. These residuals contain proteins and other essential nutrients with potentially bioactive properties, eligible for recycling and upgrading for higher-value products, e.g. for human, pet food and feed purposes. Here, we aim to cover all the important aspects of achieving optimal utilization of proteins in such residual raw materials, identifying those eligible for human consumption as co-products and for feed applications as by-products. Strict legislation regulates the utilization of various animal-based co- and by-products, representing a major hurdle if not addressed properly. Thorough understanding and optimization of all parts of the production chain, including conservation and processing, are important prerequisites for successful upgrading and industrial implementation of such products. This review includes industrially applied technologies such as freezing/cooling, acid preservation, salting, rendering and protein hydrolysis. In this regard, it is important to achieve stable production and quality through all the steps in the manufacturing chain, preferably supported by at- or online quality control points in the actual processing step. If aiming for the human market, knowledge of consumer trends and awareness are important for production and successful introduction of new products and ingredients.

Direct fermentation of potato starch and potato residues to lactic acid by Geobacillus stearothermophilus under non-sterile conditions

PubMed Central

Smerilli, Marina; Neureiter, Markus; Wurz, Stefan; Haas, Cornelia; Frühauf, Sabine; Fuchs, Werner

2015-01-01

BACKGROUND Lactic acid is an important biorefinery platform chemical. The use of thermophilic amylolytic microorganisms to produce lactic acid by fermentation constitutes an efficient strategy to reduce operating costs, including raw materials and sterilization costs. RESULTS A process for the thermophilic production of lactic acid by Geobacillus stearothermophilus directly from potato starch was characterized and optimized. Geobacillus stearothermophilus DSM 494 was selected out of 12 strains screened for amylolytic activity and the ability to form lactic acid as the major product of the anaerobic metabolism. In total more than 30 batches at 3–l scale were run at 60 °C under non-sterile conditions. The process developed produced 37 g L−1 optically pure (98%) L-lactic acid in 20 h from 50 g L−1 raw potato starch. As co-metabolites smaller amounts (<7% w/v) of acetate, formate and ethanol were formed. Yields of lactic acid increased from 66% to 81% when potato residues from food processing were used as a starchy substrate in place of raw potato starch. CONCLUSIONS Potato starch and residues were successfully converted to lactic acid by G. stearothermophilus. The process described in this study provides major benefits in industrial applications and for the valorization of starch-rich waste streams. © 2015 The Authors.Journal of Chemical Technology & Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry. PMID:25937690

76 FR 37375 - Meeting of the Public Safety Officer Medal of Valor Review Board

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-27

... INFORMATION: The Public Safety Officer Medal of Valor Review Board carries out those advisory functions... who wish to participate must register at least seven (7) days in advance of the meeting/conference... registration. Anyone requiring special accommodations should contact Mr. Joy at least seven (7) days in advance...

VALORATE: fast and accurate log-rank test in balanced and unbalanced comparisons of survival curves and cancer genomics.

PubMed

Treviño, Victor; Tamez-Pena, Jose

2017-06-15

The association of genomic alterations to outcomes in cancer is affected by a problem of unbalanced groups generated by the low frequency of alterations. For this, an R package (VALORATE) that estimates the null distribution and the P -value of the log-rank based on a recent reformulation is presented. For a given number of alterations that define the size of survival groups, the log-rank density is estimated by a weighted sum of conditional distributions depending on a co-occurrence term of mutations and events. The estimations are accurately accelerated by sampling across co-occurrences allowing the analysis of large genomic datasets in few minutes. In conclusion, the proposed VALORATE R package is a valuable tool for survival analysis. The R package is available in CRAN at https://cran.r-project.org and in http://bioinformatica.mty.itesm.mx/valorateR . vtrevino@itesm.mx. Supplementary data are available at Bioinformatics online. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

Microalgae-mediated bioremediation and valorization of cattle wastewater previously digested in a hybrid anaerobic reactor using a photobioreactor: Comparison between batch and continuous operation.

PubMed

de Mendonça, Henrique Vieira; Ometto, Jean Pierre Henry Balbaud; Otenio, Marcelo Henrique; Marques, Isabel Paula Ramos; Dos Reis, Alberto José Delgado

2018-08-15

Scenedesmus obliquus (ACOI 204/07) microalgae were cultivated in cattle wastewater in vertical alveolar flat panel photobioreactors, operated in batch and continuous mode, after previous digestion in a hybrid anaerobic reactor. In batch operation, removal efficiencies ranges of 65 to 70% of COD, 98 to 99% of NH 4 + and 69 to 77.5% of PO 4 -3 after 12days were recorded. The corresponding figures for continuous flow were from 57 to 61% of COD, 94 to 96% of NH 4 + and 65 to 70% of PO 4 -3 with mean hidraulic retention time of 12days. Higher rates of CO 2 fixation (327-547mgL -1 d -1 ) and higher biomass volumetric productivity (213-358mgL -1 d -1 ) were obtained in batch mode. This microalgae-mediated process can be considered promising for bioremediation and valorization of effluents produced by cattle breeding yielding a protein-rich microalgal biomass that could be eventually used as cattle feed. Copyright © 2018 Elsevier B.V. All rights reserved.

Impact of biochemical composition on susceptibility of algal biomass to acid-catalyzed pretreatment for sugar and lipid recovery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dong, Tao; Van Wychen, Stefanie; Nagle, Nick

One of the major challenges associated with algal biofuels production in a biorefinery-type setting is improving biomass utilization in its entirety, increasing the process energetic yields and providing economically viable and scalable co-product concepts. We focus on the impact of compositional characteristics of biomass on the susceptibility to pretreatment in order to maximize the valorization of algal biomass conversion for biofuels and bioproducts. The release of monomeric carbohydrates in the aqueous phase and extractability of the lipid fraction was measured based a response surface methodology to find significant explanatory variables and interaction terms. We studied the effect of harvest timingmore » on the conversion yields, using three algal strains; Chlorella vulgaris and Scenedesmus acutus and Nannochloropsis granulata representing three different nutritional metabolic phases. Four cultivation conditions of high (≥ 90 gallon gasoline equivalent/ton biomass) value for a combined sugar- and lipid-based biofuels process were identified. These four conditions represent either mid or late stage harvest cultivation regimes. Lastly, the results indicate that acid pretreatment has potential to be applicable for a vast range of biomass samples to obtain high energy yields, but that the exact conditions and optima are dependent on the strain and likely the starting composition of the biomass.« less

Impact of biochemical composition on susceptibility of algal biomass to acid-catalyzed pretreatment for sugar and lipid recovery

DOE PAGES

Dong, Tao; Van Wychen, Stefanie; Nagle, Nick; ...

2016-06-11

One of the major challenges associated with algal biofuels production in a biorefinery-type setting is improving biomass utilization in its entirety, increasing the process energetic yields and providing economically viable and scalable co-product concepts. We focus on the impact of compositional characteristics of biomass on the susceptibility to pretreatment in order to maximize the valorization of algal biomass conversion for biofuels and bioproducts. The release of monomeric carbohydrates in the aqueous phase and extractability of the lipid fraction was measured based a response surface methodology to find significant explanatory variables and interaction terms. We studied the effect of harvest timingmore » on the conversion yields, using three algal strains; Chlorella vulgaris and Scenedesmus acutus and Nannochloropsis granulata representing three different nutritional metabolic phases. Four cultivation conditions of high (≥ 90 gallon gasoline equivalent/ton biomass) value for a combined sugar- and lipid-based biofuels process were identified. These four conditions represent either mid or late stage harvest cultivation regimes. Lastly, the results indicate that acid pretreatment has potential to be applicable for a vast range of biomass samples to obtain high energy yields, but that the exact conditions and optima are dependent on the strain and likely the starting composition of the biomass.« less

CO2 valorization by means of Dielectric Barrier Discharge

NASA Astrophysics Data System (ADS)

Machrafi, H.; Cavadias, S.; Amouroux, J.

2011-01-01

As atmospheric pollution is causing several environmental problems it is incumbent to reduce the impact of pollution on the environment. One particular problem is the production of CO2 by many transport and industrial applications. Instead of stocking CO2 and instead of being a product, it can be used as a source. The case considered is the CO2 reformation of methane producing hydrogen and CO. It is an endothermic reaction, for which the activation barrier needs to be surpassed. This can be done efficiently by the method of Dielectric Barrier Discharge. The process relies on the collision of electrons, which are accelerated under an electrical field that is created in the discharge area. This leads to the formation of reactive species, which facilitate the abovementioned reaction. This study is performed using a Matlab program with the Reaction Engineering module in COMSOL (with an incorporated kinetic mechanism) in order to model the discharge phase. Then COMSOL (continuity and Navier-Stokes equations) is used to model the flow in the post-discharge phase. The results showed that both a 2D and 3D model can be used to model the chemical-plasma process. These methods need strongly reduced kinetic mechanism, which in some cases can cause loss of precision.

[Historical heritage and medical progress: the destiny of the scientific collections in the 'modern' Hospital of Santa Maria Nuova in Florence].

PubMed

Diana, Esther

2008-01-01

The scientific collections of Florentine Santa Maria Nuova Hospital stimulated new interest in the second half of eigthteenth century. Indeed, the modernization process of the Hospital lead to a steadily increasing alienation of its rich historical heritage, including the scientific collections. Archive documents witness the sale or the museum valorization of a number of collections including mathematical instruments and the anatomical, surgical and wax-obstetrical ones.

Sonochemistry: what potential for conversion of lignocellulosic biomass into platform chemicals?

PubMed

Chatel, Gregory; De Oliveira Vigier, Karine; Jérôme, François

2014-10-01

This Review focuses on the use of ultrasound to produce chemicals from lignocellulosic biomass. However, the question about the potential of sonochemistry for valorization/conversion of lignocellulosic biomass into added-value chemicals is rather conceptual. Until now, this technology has been mainly used for the production of low-value chemicals such as biodiesel or as simple method for pretreatment or extraction. According to preliminary studies reported in literature, access to added-value chemicals can be easily and sometimes solely obtained by the use of ultrasound. The design of sonochemical parameters offers many opportunities to develop new eco-friendly and efficient processes. The goal of this Review is to understand why the use of ultrasound is focused rather on pretreatment or extraction of lignocellulosic biomass rather than on the production of chemicals and to understand, through the reported examples, which directions need to be followed to favor strategies based on ultrasound-assisted production of chemicals from lignocellulosic biomass. We believe that ultrasound-assisted processes represent an innovative approach and will create a growing interest in academia but also in the industry in the near future. Based on the examples reported in the literature, we critically discuss how sonochemistry could offer new strategies and give rise to new results in lignocellulosic biomass valorization. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Antimicrobial Compounds from Eukaryotic Microalgae against Human Pathogens and Diseases in Aquaculture

PubMed Central

Falaise, Charlotte; François, Cyrille; Travers, Marie-Agnès; Morga, Benjamin; Haure, Joël; Tremblay, Réjean; Turcotte, François; Pasetto, Pamela; Gastineau, Romain; Hardivillier, Yann; Leignel, Vincent; Mouget, Jean-Luc

2016-01-01

The search for novel compounds of marine origin has increased in the last decades for their application in various areas such as pharmaceutical, human or animal nutrition, cosmetics or bioenergy. In this context of blue technology development, microalgae are of particular interest due to their immense biodiversity and their relatively simple growth needs. In this review, we discuss about the promising use of microalgae and microalgal compounds as sources of natural antibiotics against human pathogens but also about their potential to limit microbial infections in aquaculture. An alternative to conventional antibiotics is needed as the microbial resistance to these drugs is increasing in humans and animals. Furthermore, using natural antibiotics for livestock could meet the consumer demand to avoid chemicals in food, would support a sustainable aquaculture and present the advantage of being environmentally friendly. Using natural and renewable microalgal compounds is still in its early days, but considering the important research development and rapid improvement in culture, extraction and purification processes, the valorization of microalgae will surely extend in the future. PMID:27598176

Biotransformation of lignocellulosic materials into value-added products-A review.

PubMed

Bilal, Muhammad; Asgher, Muhammad; Iqbal, Hafiz M N; Hu, Hongbo; Zhang, Xuehong

2017-05-01

In the past decade, with the key biotechnological advancements, lignocellulosic materials have gained a particular importance. In serious consideration of global economic, environmental and energy issues, research scientists have been re-directing their interests in (re)-valorizing naturally occurring lignocellulosic-based materials. In this context, lignin-modifying enzymes (LMEs) have gained considerable attention in numerous industrial and biotechnological processes. However, their lower catalytic efficiencies and operational stabilities limit their practical and multipurpose applications in various sectors. Therefore, to expand the range of natural industrial biocatalysts e.g. LMEs, significant progress related to the enzyme biotechnology has appeared. Owing to the abundant lignocellulose availability along with LMEs in combination with the scientific advances in the biotechnological era, solid-phase biocatalysts can be economically tailored on a large scale. This review article outlines first briefly on the lignocellulose materials as a potential source for biotransformation into value-added products including composites, fine chemicals, nutraceutical, delignification, and enzymes. Comprehensive information is also given on the purification and characterization of LMEs to present their potential for the industrial and biotechnological sector. Copyright © 2017 Elsevier B.V. All rights reserved.

Valorization of Waste Obtained from Oil Extraction in Moringa Oleifera Seeds: Coagulation of Reactive Dyes in Textile Effluents.

PubMed

Vilaseca, Mercè; López-Grimau, Víctor; Gutiérrez-Bouzán, Carmen

2014-09-12

Moringa oleifera seeds contain about 40% of highly valued oil due to its wide range of applications, from nutritional issues to cosmetics or biodiesel production. The extraction of Moringa oil generates a waste (65%-75% of seeds weight) which contains a water soluble protein able to be used either in drinking water clarification or wastewater treatment. In this paper, the waste of Moringa oleifera extraction was used as coagulant to remove five reactive dyes from synthetic textile effluents. This waste constitutes a natural coagulant which was demonstrated to be effective for the treatment of industrial reactive dyestuff effluents, characterized by alkaline pH, high NaCl content and hydrolyzed dyes. The coagulation yield increased at high NaCl concentration, whereas the pH did not show any significant effect on dye removal. Moringa oleifera showed better results for dye removal than the conventional treatment of coagulation-flocculation with FeCl₃ and polyelectrolyte. Treated water can be reused in new dyeing processes of cotton fabrics with high quality results.

Valorization of Waste Obtained from Oil Extraction in Moringa Oleifera Seeds: Coagulation of Reactive Dyes in Textile Effluents

PubMed Central

Vilaseca, Mercè; López-Grimau, Víctor; Gutiérrez-Bouzán, Carmen

2014-01-01

Moringa oleifera seeds contain about 40% of highly valued oil due to its wide range of applications, from nutritional issues to cosmetics or biodiesel production. The extraction of Moringa oil generates a waste (65%–75% of seeds weight) which contains a water soluble protein able to be used either in drinking water clarification or wastewater treatment. In this paper, the waste of Moringa oleifera extraction was used as coagulant to remove five reactive dyes from synthetic textile effluents. This waste constitutes a natural coagulant which was demonstrated to be effective for the treatment of industrial reactive dyestuff effluents, characterized by alkaline pH, high NaCl content and hydrolyzed dyes. The coagulation yield increased at high NaCl concentration, whereas the pH did not show any significant effect on dye removal. Moringa oleifera showed better results for dye removal than the conventional treatment of coagulation-flocculation with FeCl3 and polyelectrolyte. Treated water can be reused in new dyeing processes of cotton fabrics with high quality results. PMID:28788199

Social Role Valorization: A Proposed New Term for the Principle of Normalization

ERIC Educational Resources Information Center

Wolfensberger, Wolf

2011-01-01

The highest goal of the principle of normalization has recently been clarified to be the establishment, enhancement, or defense of the social role(s) of a person or group, via the enhancement of people's social images and personal competencies. In consequence, it is proposed that normalization be henceforth called "social role valorization."

75 FR 30859 - Meeting of the Public Safety Officer Medal of Valor Review Board

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-02

... INFORMATION: The Public Safety Officer Medal of Valor Review Board carries out those advisory functions... participate must register at least seven (7) days in advance of the meeting/conference call by contacting Mr.... Anyone requiring special accommodations should contact Mr. Joy at least seven (7) days in advance of the...

[Not Available].

PubMed

Roman B-C, Michela; Gonzales-Huamán, Flor; Maguiña, Jorge L

2016-07-19

Leímos con interés el artículo titulado "Valores del índice cintura/cadera en la población escolar de Bogotá, Colombia. Estudio FUPRECOL" que se realizó en 5.921 sujetos de entre 9 a 17,9 años y que tuvo como objetivo determinar los valores de referencia del índice cintura-cadera (ICC).

Integration of Waste Valorization for Sustainable Production of Chemicals and Materials via Algal Cultivation.

PubMed

Chen, Yong; Sun, Li-Ping; Liu, Zhi-Hui; Martin, Greg; Sun, Zheng

2017-11-27

Managing waste is an increasing problem globally. Microalgae have the potential to help remove contaminants from a range of waste streams and convert them into useful biomass. This article presents a critical review of recent technological developments in the production of chemicals and other materials from microalgae grown using different types of waste. A range of novel approaches are examined for efficiently capturing CO 2 in flue gas via photosynthetic microalgal cultivation. Strategies for using microalgae to assimilate nitrogen, organic carbon, phosphorus, and metal ions from wastewater are considered in relation to modes of production. Generally, more economical open cultivation systems such as raceway ponds are better suited for waste conversion than more expensive closed photobioreactor systems, which might have use for higher-value products. The effect of cultivation methods and the properties of the waste streams on the composition the microalgal biomass is discussed relative to its utilization. Possibilities include the production of biodiesel via lipid extraction, biocrude from hydrothermal liquefaction, and bioethanol or biogas from microbial conversion. Microalgal biomass produced from wastes may also find use in higher-value applications including protein feeds or for the production of bioactive compounds such as astaxanthin or omega-3 fatty acids. However, for some waste streams, further consideration of how to manage potential microbial and chemical contaminants is needed for food or health applications. The use of microalgae for waste valorization holds promise. Widespread implementation of the available technologies will likely follow from further improvements to reduce costs, as well as the increasing pressure to effectively manage waste.

An Investigation of the Valorization of Durian Biomass

NASA Astrophysics Data System (ADS)

Ng, C.

2016-12-01

The unsustainable exploitation of limited resources has made the valorization of biomass to obtain a higher value from waste a particular area of interest in green chemistry. Much research has been done on the conversion of food waste to valuable chemicals. This study investigates the conversion of the biomass of durian (durio zibethinus), a fruit widely consumed particularly in Southeast Asia, to gamma-valerolactone (GVL). In the presence of sulfuric acid catalyst, the process occurs via four consecutive reactions, including the dehydration of carbohydrates such as fructose (C6H12O6) and cellulose ((C6H10O5)n) to 5-(hydroxymethyl)furfural (HMF), the hydration of HMF to levulinic acid (LA) and formic acid (FA), the hydrogenation of LA to 4-hydroxyvaleric acid (4-HVA), and ultimately the dehydration to gamma-valerolactone (GVL). It is hypothesized that, throughout an 8 hour period, there will be an initial peak in HMF concentration, followed by a steady decrease in its concentration due to hydration of HMF to LA and FA. Concentrations of HMF, LA, FA, and ammonium ion will be measured by running NMR analyses of the durian skin, meat, and seed samples taken at intervals of 0, 1, 2, 4, and 8 hours elapsed. Many of the impressive physical and chemical properties of GVL, including its nontoxicity, miscibility with water, and low vapor pressure, make it highly suitable as a sustainable liquid for use as a solvent, a transportation fuel, and a versatile feedstock for further derivatization. For example, addition of GVL to a diesel-biodiesel mixture results in a significant reduction in smoke and carbon monoxide emissions. Therefore, our aim in this study is to identify the concentrations of various valuable compounds in durian waste, and thereby assess the viability of the valorization of durian biomass.

Valorization of pyrolysis water: a biorefinery side stream, for 1,2-propanediol production with engineered Corynebacterium glutamicum.

PubMed

Lange, Julian; Müller, Felix; Bernecker, Kerstin; Dahmen, Nicolaus; Takors, Ralf; Blombach, Bastian

2017-01-01

A future bioeconomy relies on the efficient use of renewable resources for energy and material product supply. In this context, biorefineries have been developed and play a key role in converting lignocellulosic residues. Although a holistic use of the biomass feed is desired, side streams evoke in current biorefinery approaches. To ensure profitability, efficiency, and sustainability of the overall conversion process, a meaningful valorization of these materials is needed. Here, a so far unexploited side stream derived from fast pyrolysis of wheat straw-pyrolysis water-was used for production of 1,2-propanediol in microbial fermentation with engineered Corynebacterium glutamicum . A protocol for pretreatment of pyrolysis water was established and enabled growth on its major constituents, acetate and acetol, with rates up to 0.36 ± 0.04 h -1 . To convert acetol to 1,2-propanediol, the plasmid pJUL gldA expressing the glycerol dehydrogenase from Escherichia coli was introduced into C. glutamicum . 1,2-propanediol was formed in a growth-coupled biotransformation and production was further increased by construction of C. glutamicum Δ pqo Δ aceE Δ ldhA Δ mdh pJUL gldA . In a two-phase aerobic/microaerobic fed-batch process with pyrolysis water as substrate, this strain produced 18.3 ± 1.2 mM 1,2-propanediol with a yield of 0.96 ± 0.05 mol 1,2-propanediol per mol acetol and showed an overall volumetric productivity of 1.4 ± 0.1 mmol 1,2-propanediol L -1  h -1 . This study implements microbial fermentation into a biorefinery based on pyrolytic liquefaction of lignocellulosic biomass and accesses a novel value chain by valorizing the side stream pyrolysis water for 1,2-PDO production with engineered C. glutamicum . The established bioprocess operated at maximal product yield and accomplished the so far highest overall volumetric productivity for microbial 1,2-PDO production with an engineered producer strain. Besides, the results highlight the potential of microbial conversion of this biorefinery side stream to other valuable products.

Discretion vs. Valor: The Development and Evaluation of a Simulation Game about Being a Believer in the Soviet Union.

ERIC Educational Resources Information Center

Blackstone, Barbara

A study was conducted to determine the effectiveness of "Discretion vs. Valor," a simulation game designed to give North American players a chance to: (1) identify with "believers" (Christians) in the Soviet Union in order to form new images of these persons; (2) gain empathy for Christians by understanding the dilemmas they…

Lignocellulosic Biomass Transformations via Greener Oxidative Pretreatment Processes: Access to Energy and Value-Added Chemicals

PubMed Central

Den, Walter; Sharma, Virender K.; Lee, Mengshan; Nadadur, Govind; Varma, Rajender S.

2018-01-01

Anthropogenic climate change, principally induced by the large volume of carbon dioxide emission from the global economy driven by fossil fuels, has been observed and scientifically proven as a major threat to civilization. Meanwhile, fossil fuel depletion has been identified as a future challenge. Lignocellulosic biomass in the form of organic residues appears to be the most promising option as renewable feedstock for the generation of energy and platform chemicals. As of today, relatively little bioenergy comes from lignocellulosic biomass as compared to feedstock such as starch and sugarcane, primarily due to high cost of production involving pretreatment steps required to fragment biomass components via disruption of the natural recalcitrant structure of these rigid polymers; low efficiency of enzymatic hydrolysis of refractory feedstock presents a major challenge. The valorization of lignin and cellulose into energy products or chemical products is contingent on the effectiveness of selective depolymerization of the pretreatment regime which typically involve harsh pyrolytic and solvothermal processes assisted by corrosive acids or alkaline reagents. These unselective methods decompose lignin into many products that may not be energetically or chemically valuable, or even biologically inhibitory. Exploring milder, selective and greener processes, therefore, has become a critical subject of study for the valorization of these materials in the last decade. Efficient alternative activation processes such as microwave- and ultrasound irradiation are being explored as replacements for pyrolysis and hydrothermolysis, while milder options such as advanced oxidative and catalytic processes should be considered as choices to harsher acid and alkaline processes. Herein, we critically abridge the research on chemical oxidative techniques for the pretreatment of lignocellulosics with the explicit aim to rationalize the objectives of the biomass pretreatment step and the problems associated with the conventional processes. The mechanisms of reaction pathways, selectivity and efficiency of end-products obtained using greener processes such as ozonolysis, photocatalysis, oxidative catalysis, electrochemical oxidation, and Fenton or Fenton-like reactions, as applied to depolymerization of lignocellulosic biomass are summarized with deliberation on future prospects of biorefineries with greener pretreatment processes in the context of the life cycle assessment. PMID:29755972

Lignocellulosic Biomass Transformations via Greener Oxidative Pretreatment Processes: Access to Energy and Value-Added Chemicals.

PubMed

Den, Walter; Sharma, Virender K; Lee, Mengshan; Nadadur, Govind; Varma, Rajender S

2018-01-01

Anthropogenic climate change, principally induced by the large volume of carbon dioxide emission from the global economy driven by fossil fuels, has been observed and scientifically proven as a major threat to civilization. Meanwhile, fossil fuel depletion has been identified as a future challenge. Lignocellulosic biomass in the form of organic residues appears to be the most promising option as renewable feedstock for the generation of energy and platform chemicals. As of today, relatively little bioenergy comes from lignocellulosic biomass as compared to feedstock such as starch and sugarcane, primarily due to high cost of production involving pretreatment steps required to fragment biomass components via disruption of the natural recalcitrant structure of these rigid polymers; low efficiency of enzymatic hydrolysis of refractory feedstock presents a major challenge. The valorization of lignin and cellulose into energy products or chemical products is contingent on the effectiveness of selective depolymerization of the pretreatment regime which typically involve harsh pyrolytic and solvothermal processes assisted by corrosive acids or alkaline reagents. These unselective methods decompose lignin into many products that may not be energetically or chemically valuable, or even biologically inhibitory. Exploring milder, selective and greener processes, therefore, has become a critical subject of study for the valorization of these materials in the last decade. Efficient alternative activation processes such as microwave- and ultrasound irradiation are being explored as replacements for pyrolysis and hydrothermolysis, while milder options such as advanced oxidative and catalytic processes should be considered as choices to harsher acid and alkaline processes. Herein, we critically abridge the research on chemical oxidative techniques for the pretreatment of lignocellulosics with the explicit aim to rationalize the objectives of the biomass pretreatment step and the problems associated with the conventional processes. The mechanisms of reaction pathways, selectivity and efficiency of end-products obtained using greener processes such as ozonolysis, photocatalysis, oxidative catalysis, electrochemical oxidation, and Fenton or Fenton-like reactions, as applied to depolymerization of lignocellulosic biomass are summarized with deliberation on future prospects of biorefineries with greener pretreatment processes in the context of the life cycle assessment.

Lignocellulosic Biomass Transformations via Greener Oxidative Pretreatment Processes: Access to Energy and Value-Added Chemicals

NASA Astrophysics Data System (ADS)

Den, Walter; Sharma, Virender K.; Lee, Mengshan; Nadadur, Govind; Varma, Rajender S.

2018-04-01

Anthropogenic climate change, principally induced by the large volume of carbon dioxide emission from the global economy driven by fossil fuels, has been observed and scientifically proven as a major threat to civilization. Meanwhile, fossil fuel depletion has been identified as a future challenge. Lignocellulosic biomass in the form of organic residues appears to be the most promising option as renewable feedstock for the generation of energy and platform chemicals. As of today, relatively little bioenergy comes from lignocellulosic biomass as compared to feedstock such as starch and sugarcane, primarily due to high cost of production involving pretreatment steps required to fragment biomass components via disruption of the natural recalcitrant structure of these rigid polymers; low efficiency of enzymatic hydrolysis of refractory feedstock presents a major challenge. The valorization of lignin and cellulose into energy products or chemical products is contingent on the effectiveness of selective depolymerization of the pretreatment regime which typically involve harsh pyrolytic and solvothermal processes assisted by corrosive acids or alkaline reagents. These unselective methods decompose lignin into many products that may not be energetically or chemically valuable, or even biologically inhibitory. Exploring milder, selective and greener processes, therefore, has become a critical subject of study for the valorization of these materials in the last decade. Efficient alternative activation processes such as microwave- and ultrasound irradiation are being explored as replacements for pyrolysis and hydrothermolysis, while milder options such as advanced oxidative and catalytic processes should be considered as choices to harsher acid and alkaline processes. Herein, we critically abridge the research on chemical oxidative techniques for the pretreatment of lignocellulosics with the explicit aim to rationalize the objectives of the biomass pretreatment step and the problems associated with the conventional processes. The mechanisms of reaction pathways, selectivity and efficiency of end-products obtained using greener processes such as ozonolysis, photocatalysis, oxidative catalysis, electrochemical oxidation, and Fenton or Fenton-like reactions, as applied to depolymerization of lignocellulosic biomass are summarized with deliberation on future prospects of biorefineries with greener pretreatment processes in the context of the life cycle assessment.

Performance of the dipstick screening test as a predictor of negative urine culture.

PubMed

Marques, Alexandre Gimenes; Doi, André Mario; Pasternak, Jacyr; Damascena, Márcio Dos Santos; França, Carolina Nunes; Martino, Marinês Dalla Valle

2017-01-01

To investigate whether the urine dipstick screening test can be used to predict urine culture results. A retrospective study conducted between January and December 2014 based on data from 8,587 patients with a medical order for urine dipstick test, urine sediment analysis and urine culture. Sensitivity, specificity, positive and negative predictive values were determined and ROC curve analysis was performed. The percentage of positive cultures was 17.5%. Nitrite had 28% sensitivity and 99% specificity, with positive and negative predictive values of 89% and 87%, respectively. Leukocyte esterase had 79% sensitivity and 84% specificity, with positive and negative predictive values of 51% and 95%, respectively. The combination of positive nitrite or positive leukocyte esterase tests had 85% sensitivity and 84% specificity, with positive and negative predictive values of 53% and 96%, respectively. Positive urinary sediment (more than ten leukocytes per microliter) had 92% sensitivity and 71% specificity, with positive and negative predictive values of 40% and 98%, respectively. The combination of nitrite positive test and positive urinary sediment had 82% sensitivity and 99% specificity, with positive and negative predictive values of 91% and 98%, respectively. The combination of nitrite or leukocyte esterase positive tests and positive urinary sediment had the highest sensitivity (94%) and specificity (84%), with positive and negative predictive values of 58% and 99%, respectively. Based on ROC curve analysis, the best indicator of positive urine culture was the combination of positives leukocyte esterase or nitrite tests and positive urinary sediment, followed by positives leukocyte and nitrite tests, positive urinary sediment alone, positive leukocyte esterase test alone, positive nitrite test alone and finally association of positives nitrite and urinary sediment (AUC: 0.845, 0.844, 0.817, 0.814, 0.635 and 0.626, respectively). A negative urine culture can be predicted by negative dipstick test results. Therefore, this test may be a reliable predictor of negative urine culture. Verificar se a triagem de urina por fitas reativas é capaz de predizer a cultura de urina. Métodos Estudo retrospectivo realizado entre janeiro e dezembro de 2014 com 8.587 pacientes, com solicitação médica de triagem de urina (fita), sedimento urinário e cultura de urina. sensibilidade, especificidade, valor preditivo positivo, valor preditivo negativo e curva ROC. Foram positivas 17,5% das culturas. O nitrito apresentou sensibilidade de 28% e especificidade de 99%. O valor preditivo positivo foi de 89% e o valor preditivo negativo de 87%. Esterase apresentou sensibilidade de 79% e especificidade de 84%. Valor preditivo positivo e valor preditivo negativo foram de 51% e 95%, respectivamente. A combinação de nitrito ou esterase positivos apresentou sensibilidade de 85% e especificidade de 84%. Valor preditivo positivo e valor preditivo negativo foram, respectivamente, 53% e 96%. O sedimento positivo (mais de dez leucócitos por microlitro) apresentou sensibilidade de 92% e especificidade de 71%. O valor preditivo positivo foi 40% e o negativo, 98%. A combinação de nitrito e sedimento urinário positivos apresentou sensibilidade de 82% e especificidade de 99%. Os valores preditivos positivo e negativo foram 91% e 98%, respectivamente. Para o nitrito ou esterase positivos mais os leucócitos positivos, a sensibilidade foi de 94% e a especificidade de 84%. O valor preditivo positivo foi de 58% e o negativo foi de 99%. Com base na curva ROC, o melhor indicador de urocultura positiva foi a associação entre a esterase ou nitrito positivos na fita mais os leucócitos positivos no sedimento, seguido por nitrito e esterase positivos, sedimento urinário positivo isolado, esterase positiva isolada, nitrito positivo isolado e, finalmente, pela associação entre nitrito e sedimento urinário positivos (AUC: 0,845, 0,844, 0,817, 0,814, 0,635 e 0,626, respectivamente). Uma urocultura negativa pode ser prevista com resultados negativos na fita. Portanto, este teste pode ser um preditor confiável de urocultura negativa.

Building Trust: The Challenge of Building Partnership Capacity in U.S.-Mexico Military Relations

DTIC Science & Technology

2014-03-01

culture devoted to an extreme lineal hierarchy, especially during this developmental process, tends to hinder the ability of the member to retain and use...www.sedena.gob.mx/index.php/ educacion -militar. 25 educational objectives. These extreme vertical culture becomes a huge road block for those who want others to...in Veracruz and the acts of valor by the Mexican people— especially by the naval cadets—were fully embedded throughout the formation of all Mexican

Total Protein Content Determination of Microalgal Biomass by Elemental Nitrogen Analysis and a Dedicated Nitrogen-to-Protein Conversion Factor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Laurens, Lieve M; Olstad-Thompson, Jessica L; Templeton, David W

Accurately determining protein content is important in the valorization of algal biomass in food, feed, and fuel markets, where these values are used for component balance calculations. Conversion of elemental nitrogen to protein is a well-accepted and widely practiced method, but depends on developing an applicable nitrogen-to-protein conversion factor. The methodology reported here covers the quantitative assessment of the total nitrogen content of algal biomass and a description of the methodology that underpins the accurate de novo calculation of a dedicated nitrogen-to-protein conversion factor.

Public health and valorization of genome-based technologies: a new model

PubMed Central

2011-01-01

Background The success rate of timely translation of genome-based technologies to commercially feasible products/services with applicability in health care systems is significantly low. We identified both industry and scientists neglect health policy aspects when commercializing their technology, more specifically, Public Health Assessment Tools (PHAT) and early on involvement of decision makers through which market authorization and reimbursements are dependent. While Technology Transfer (TT) aims to facilitate translation of ideas into products, Health Technology Assessment, one component of PHAT, for example, facilitates translation of products/processes into healthcare services and eventually comes up with recommendations for decision makers. We aim to propose a new model of valorization to optimize integration of genome-based technologies into the healthcare system. Methods The method used to develop our model is an adapted version of the Fish Trap Model and the Basic Design Cycle. Results We found although different, similarities exist between TT and PHAT. Realizing the potential of being mutually beneficial justified our proposal of their relative parallel initiation. We observed that the Public Health Genomics Wheel should be included in this relative parallel activity to ensure all societal/policy aspects are dealt with preemptively by both stakeholders. On further analysis, we found out this whole process is dependent on the Value of Information. As a result, we present our LAL (Learning Adapting Leveling) model which proposes, based on market demand; TT and PHAT by consultation/bi-lateral communication should advocate for relevant technologies. This can be achieved by public-private partnerships (PPPs). These widely defined PPPs create the innovation network which is a developing, consultative/collaborative-networking platform between TT and PHAT. This network has iterations and requires learning, assimilating and using knowledge developed and is called absorption capacity. We hypothesize that the higher absorption capacity, higher success possibility. Our model however does not address the phasing out of technology although we believe the same model can be used to simultaneously phase out a technology. Conclusions This model proposes to facilitate optimization/decrease the timeframe of integration in healthcare. It also helps industry and researchers to come to a strategic decision at an early stage, about technology being developed thus, saving on resources, hence minimizing failures. PMID:22142533

Wastewater disposal to landfill-sites: a synergistic solution for centralized management of olive mill wastewater and enhanced production of landfill gas.

PubMed

Diamantis, Vasileios; Erguder, Tuba H; Aivasidis, Alexandros; Verstraete, Willy; Voudrias, Evangelos

2013-10-15

The present paper focuses on a largely unexplored field of landfill-site valorization in combination with the construction and operation of a centralized olive mill wastewater (OMW) treatment facility. The latter consists of a wastewater storage lagoon, a compact anaerobic digester operated all year round and a landfill-based final disposal system. Key elements for process design, such as wastewater pre-treatment, application method and rate, and the potential effects on leachate quantity and quality, are discussed based on a comprehensive literature review. Furthermore, a case-study for eight (8) olive mill enterprises generating 8700 m(3) of wastewater per year, was conceptually designed in order to calculate the capital and operational costs of the facility (transportation, storage, treatment, final disposal). The proposed facility was found to be economically self-sufficient, as long as the transportation costs of the OMW were maintained at ≤4.0 €/m(3). Despite that EU Landfill Directive prohibits wastewater disposal to landfills, controlled application, based on appropriately designed pre-treatment system and specific loading rates, may provide improved landfill stabilization and a sustainable (environmentally and economically) solution for effluents generated by numerous small- and medium-size olive mill enterprises dispersed in the Mediterranean region. Copyright © 2013 Elsevier Ltd. All rights reserved.

Flexible Description and Adaptive Processing of Earth Observation Data through the BigEarth Platform

NASA Astrophysics Data System (ADS)

Gorgan, Dorian; Bacu, Victor; Stefanut, Teodor; Nandra, Cosmin; Mihon, Danut

2016-04-01

The Earth Observation data repositories extending periodically by several terabytes become a critical issue for organizations. The management of the storage capacity of such big datasets, accessing policy, data protection, searching, and complex processing require high costs that impose efficient solutions to balance the cost and value of data. Data can create value only when it is used, and the data protection has to be oriented toward allowing innovation that sometimes depends on creative people, which achieve unexpected valuable results through a flexible and adaptive manner. The users need to describe and experiment themselves different complex algorithms through analytics in order to valorize data. The analytics uses descriptive and predictive models to gain valuable knowledge and information from data analysis. Possible solutions for advanced processing of big Earth Observation data are given by the HPC platforms such as cloud. With platforms becoming more complex and heterogeneous, the developing of applications is even harder and the efficient mapping of these applications to a suitable and optimum platform, working on huge distributed data repositories, is challenging and complex as well, even by using specialized software services. From the user point of view, an optimum environment gives acceptable execution times, offers a high level of usability by hiding the complexity of computing infrastructure, and supports an open accessibility and control to application entities and functionality. The BigEarth platform [1] supports the entire flow of flexible description of processing by basic operators and adaptive execution over cloud infrastructure [2]. The basic modules of the pipeline such as the KEOPS [3] set of basic operators, the WorDeL language [4], the Planner for sequential and parallel processing, and the Executor through virtual machines, are detailed as the main components of the BigEarth platform [5]. The presentation exemplifies the development of some Earth Observation oriented applications based on flexible description of processing, and adaptive and portable execution over Cloud infrastructure. Main references for further information: [1] BigEarth project, http://cgis.utcluj.ro/projects/bigearth [2] Gorgan, D., "Flexible and Adaptive Processing of Earth Observation Data over High Performance Computation Architectures", International Conference and Exhibition Satellite 2015, August 17-19, Houston, Texas, USA. [3] Mihon, D., Bacu, V., Colceriu, V., Gorgan, D., "Modeling of Earth Observation Use Cases through the KEOPS System", Proceedings of the Intelligent Computer Communication and Processing (ICCP), IEEE-Press, pp. 455-460, (2015). [4] Nandra, C., Gorgan, D., "Workflow Description Language for Defining Big Earth Data Processing Tasks", Proceedings of the Intelligent Computer Communication and Processing (ICCP), IEEE-Press, pp. 461-468, (2015). [5] Bacu, V., Stefan, T., Gorgan, D., "Adaptive Processing of Earth Observation Data on Cloud Infrastructures Based on Workflow Description", Proceedings of the Intelligent Computer Communication and Processing (ICCP), IEEE-Press, pp.444-454, (2015).

Application of NIR hyperspectral imaging for post-consumer polyolefins recycling

NASA Astrophysics Data System (ADS)

Serranti, Silvia; Gargiulo, Aldo; Bonifazi, Giuseppe

2012-06-01

An efficient large-scale recycling approach of particulate solid wastes is always accomplished according to the quality of the materials fed to the recycling plant and/or to any possible continuous and reliable control of the different streams inside the processing plants. Processing technologies addressed to recover plastics need to be extremely powerful, since they must be relatively simple to be cost-effective, but also accurate enough to create high-purity products and able to valorize a substantial fraction of the plastic waste materials into useful products of consistent quality in order to be economical. On the other hand, the potential market for such technologies is large and the boost of environmental regulations, and the oil price increase, has made many industries interested both in "general purpose" waste sorting technologies, as well as in developing more specialized sensing devices and/or inspection logics for a better quality assessment of plastic products. In this perspective recycling strategies have to be developed taking into account some specific aspects as i) mixtures complexity: the valuable material has to be extracted from the residue, ii) overall production: the profitability of plastic can be achieved only with mass production and iii) costs: low-cost sorting processes are required. In this paper new analytical strategies, based on hyperspectral imaging in the near infrared field (1000-1700 nm), have been investigated and set up in order to define sorting and/or quality control logics that could be profitably applied, at industrial plant level, for polyolefins recycling.

Recycling of waste automotive laminated glass and valorization of polyvinyl butyral through mechanochemical separation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swain, Basudev, E-mail: swain@iae.re.kr; Ryang Park, Jae; Yoon Shin, Dong

Due to strong binding, optical clarity, adhesion to many surfaces, toughness and flexibility polyvinyl butyral (PVB) resin films are commonly used in the automotive and architectural application as a protective interlayer in the laminated glass. Worldwide million tons of PVB waste generated from end-of-life automotive associated with various environmental issues. Stringent environmental directive, higher land cost eliminates land filling option, needs a study, we have developed a mechanochemical separation process to separate PVB resins from glass and characterized the separated PVB through various techniques, i.e., scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), infrared spectroscopy (IR) and nuclear magnetic resonancemore » spectroscopy (NMR). Commercial nonionic surfactants D201 used for the mechanochemical separation purpose. Through parameter optimization following conditions are considered to be the optimum condition; 30 vol% D201, stirring speed of 400 rpm, 35 °C temperature, operation time 1 h, and dilute D201 volume to waste automotive laminated glass weight ratio of ≈25. The technology developed in our laboratory is sustainable, environmentally friendly, techno-economical feasible process, capable of mass production (recycling). - Highlights: • Waste automotive laminated glass and polyvinyl butyral mechanochemically separated. • An economical total recovery and environment-friendly process has been developed. • It is a global problem rather than regional environmental issue has been addressed. • Without using hazardous chemical wastes are being converted to a wealth.« less

Environmental assessment of food waste valorization in producing biogas for various types of energy use based on LCA approach.

PubMed

Woon, Kok Sin; Lo, Irene M C; Chiu, Sam L H; Yan, Dickson Y S

2016-04-01

This paper aims to evaluate the environmental impacts of valorizing food waste for three types of energy use, namely electricity and heat, city gas, and biogas fuel as a petrol, diesel, and liquefied petroleum gas substitute for vehicle use, with reference to the Hong Kong scenario. The life cycle based environmental assessment is conducted from bin-to-cradle system boundary via SimaPro 7.2.4 with ReCiPe 1.04. All of the inventory data of included processes is based on reports of government and industrial sectors. The results show that biogas fuel as a petrol substitute for vehicle use is advantageous over other types of energy use in regard to human health and ecosystems, and it is also the best considering the government's future emission reduction targets set out for the power and transport sectors in Hong Kong. By turning 1080 tonnes per day of food waste into biogas vehicle fuel as petrol substitute, it reduces 1.9% of greenhouse gas emissions in the transport sectors, which results a larger decrease of GHG emissions than the achieved mitigation in Hong Kong from 2005 to 2010. Copyright © 2016 Elsevier Ltd. All rights reserved.

Automobile Shredder Residues in Italy: characterization and valorization opportunities.

PubMed

Fiore, S; Ruffino, B; Zanetti, M C

2012-08-01

At the moment Automobile Shredder Residue (ASR) is usually landfilled worldwide, but European draft Directive 2000/53/CE forces the development of alternative solutions, stating the 95%-wt recovery of an End of Life Vehicle (ELV) weight to be fulfilled by 2015. This work describes two industrial tests, each involving 250-300 t of ELVs, in which different pre-shredding operations were performed. The produced ASR materials underwent an extended characterization and some post-shredding processes, consisting of dimensional, magnetic, electrostatic and densimetric separation phases, were tested on laboratory scale, having as main purpose the enhancement of ASR recovery/recycling and the minimization of the landfilled fraction. The gathered results show that accurate depollution and dismantling operations are mandatory to obtain a high quality ASR material which may be recycled/recovered and partially landfilled according to the actual European Union regulations, with particular concern for Lower Heating Value (LHV), heavy metals content and Dissolved Organic Carbon (DOC) as critical parameters. Moreover post-shredding technical solutions foreseeing minimum economic and engineering efforts, therefore realizable in common European ELVs shredding plants, may lead to multi-purposed (material recovery and thermal valorization) opportunities for ASR reuse/recovery. Copyright © 2012 Elsevier Ltd. All rights reserved.

Social Role Theory and Social Role Valorization for Care Management Practice.

PubMed

Blakely, Thomas J; Dziadosz, Gregory M

2015-01-01

This article proposes that social role theory (SRT) and social role valorization (SRV) be established as organizing theories for care managers. SRT is a recognized sociological theory that has a distinctive place in care management practice. SRV is an adjunct for SRT that focuses on people who are devalued by being in a negative social position and supports behavior change and movement to a valued social position.

Rice Husk Silica-Derived Nanomaterials for Battery Applications: A Literature Review.

PubMed

Shen, Yafei

2017-02-08

Silica-rich rice husk (RH) is an abundant and sustainable agricultural waste. The recovery of value-added products from RH or its ash to explore an economic way for the valorization of agricultural wastes has attracted wide attention. For instance, RH can be converted to biofuels and biochars simultaneously via thermochemical processes. In general, the applications of RH biochars include soil remediation, pollutant removal, silicon battery materials, and so forth. This review concludes recent progress in the synthesis of RH-derived silicon materials for lithium-ion battery (LIB) applications. Silica nanomaterials produced from RH are initially discussed. RH amorphous silica can also be fabricated to crystal silicon used for battery materials via widely used magnesiothermic reduction. However, the RH-derived Si nanoparticles suffer from a low Coulombic efficiency in the initial charge/discharge and limited cycle life as anode materials due to high surface reactions and low thermodynamic stability. The synthesis of Si materials with nano/microhierarchical structure would be an ideal way to improve their electrochemical performances. Embedding nano-Si into 3D conductive matrix is an effective way to improve the structural stability. Among the Si/carbon composite materials, carbon nanotubdes (CNTs) are a promising matrix due to the wired morphology, high electronic conductivity, and robust structure. Additionally, CNTs can easily form 3D cross-linked conducting networks, ensuring effective electron transportation among active particles. Si nanomaterials with microhierarchical structures in which CNTs are tightly intertwined between the RH-derived Si nanoparticles have been proven to be ideal LIB anode materials.

Cultural adaptation and the Clavien-Dindo surgical complications classification translated to Brazilian Portuguese.

PubMed

Moreira, Luis Fernando; Pessôa, Marcelo Castro Marçal; Mattana, Diego Sachet; Schmitz, Fernando Fernandes; Volkweis, Bernardo Silveira; Antoniazzi, Jorge Luiz; Ribeiro, Liacyr

2016-01-01

to generate a translated and validated version of the Clavien-Dindo Classification of Surgical Complications (CDC) to Brazilian Portuguese (CDC-BR). the process of translation and adaptation followed the guideline of Beaton et al., 2000. We divided 76 participating surgeons, in different levels of experience, from the Department Surgery of the Hospital de Clínicas de Porto Alegre, into two groups: Group I applied the original version (CDC, n=36);r Group II used the modified version (CDC-BR, n=40). Each group classified 15 clinical cases of surgical complications. We compared performance between the groups (Mann-Whitney test) relating to the level of experience of the surgeon (Kruskal-Wallis test), considering p value <0.05 as significant. the performance of the Group II (CDC-BR) was higher, with 85% accuracy, compared with 79% of Group I (CDC), p-value =0.012. The performance of the groups as for surgeons experience displayed p=0.171 for Group I, p=0.528 for Group II, and p=0.135 for overall performance. we produced a translated and validated version of the CDC for Brazilian Portuguese. The instrument will be a useful tool in the production of evidence on surgical outcomes. gerar uma versão traduzida e validada da Classificação de Complicações Cirúrgicas de Clavien-Dindo (CCD) para o Português-Brasileiro (CCD-BR). o processo de tradução e adaptação seguiu a diretriz de Beaton et al., de 2000. Formaram-se dois grupos, Grupo I, que utilizou a versão original (CCD, n=36) testado em relação ao Grupo II, com a versão modificada (CCD-BR, n=40), com um total de 76 cirurgiões participantes em níveis de experiência distintos do Departamento de Cirurgia do Hospital de Clínicas de Porto Alegre. Quinze casos clínicos de complicações cirúrgicas foram classificados em cada grupo. Comparou-se o desempenho entre grupos (teste de Mann-Whitney) relacionando ao nível de experiência dos cirurgiões (teste de Kruskal-Wallis). Valor de p<0,05 como significativo. o desempenho do Grupo II (CCD-BR) foi superior, com 85% de acertos, contra 79% do Grupo I (CCD), p-valor=0,012 do teste de Mann-Whitney. O desempenho dos grupos em relação à experiência dos cirurgiões foi p-valor=0,171 para o Grupo I, p-valor=0,528 para o Grupo II, e p-valor=0,135 para o desempenho geral, teste de Kruskal-Wallis. foi produzida uma versão traduzida e validada da CCD para o Português-Brasileiro. O instrumento produzido será ferramenta útil na produção de evidências sobre os resultados cirúrgicos.

[Process of training and insertion in the labor market: a vision of nursing graduates].

PubMed

2014-03-01

Study to analyze nursing graduates' perception about the contribution of the training process in its insertion in the labour market. Descriptive exploratory study, a qualitative approach. The data was collected in 2011 through semistructured interviews. Attended by 15 professionals, graduated from the Nursing Course at a South Brazilian university in 2009-2010, inserted in the labour market. Data was analysed according to Minayo's proposals. From this analysis emerged the category Training route, including the subcategory: following the travel itineray. The results demonstrate the need for curricular integration, better use of clinical practices experiences, research valorization, and the importance of training based on dialogue between students and professors.

Biological valorization of low molecular weight lignin.

PubMed

Abdelaziz, Omar Y; Brink, Daniel P; Prothmann, Jens; Ravi, Krithika; Sun, Mingzhe; García-Hidalgo, Javier; Sandahl, Margareta; Hulteberg, Christian P; Turner, Charlotta; Lidén, Gunnar; Gorwa-Grauslund, Marie F

2016-12-01

Lignin is a major component of lignocellulosic biomass and as such, it is processed in enormous amounts in the pulp and paper industry worldwide. In such industry it mainly serves the purpose of a fuel to provide process steam and electricity, and to a minor extent to provide low grade heat for external purposes. Also from other biorefinery concepts, including 2nd generation ethanol, increasing amounts of lignin will be generated. Other uses for lignin - apart from fuel production - are of increasing interest not least in these new biorefinery concepts. These new uses can broadly be divided into application of the polymer as such, native or modified, or the use of lignin as a feedstock for the production of chemicals. The present review focuses on the latter and in particular the advances in the biological routes for chemicals production from lignin. Such a biological route will likely involve an initial depolymerization, which is followed by biological conversion of the obtained smaller lignin fragments. The conversion can be either a short catalytic conversion into desired chemicals, or a longer metabolic conversion. In this review, we give a brief summary of sources of lignin, methods of depolymerization, biological pathways for conversion of the lignin monomers and the analytical tools necessary for characterizing and evaluating key lignin attributes. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

Valorization of postharvest sweet cherry discard for the development of dehydrated fruit ingredients: compositional, physical, and mechanical properties.

PubMed

Franceschinis, Lorena; Sette, Paula; Salvatori, Daniela; Schebor, Carolina

2018-04-20

Sweet cherries are an excellent source of phenolic compounds, which may contribute to a healthy diet. The objective of this work was to generate dehydrated ingredients from postharvest discard of sweet cherries. Four dried ingredients were obtained from fresh sweet cherry discard (Lapins var.) using an osmotic dehydration pretreatment and freeze drying or air drying. The ingredients showed an important phenolic contribution (2.8-6.6 g gallic acid kg -1 of product) and preserved the natural color of the fruit to a great extent. Freeze-dried ingredients were less hygroscopic than air-dried ones, and presented with a softer texture. All the ingredients were in a supercooled state at room temperature (T g range: -23.0 to -18.8 °C). Sugar infusion pretreatment caused a decrease in water sorption capacity and molecular mobility; it also reduced the initial rehydration rate. Relevant differences in nutritional and structural characteristics of the ingredients were observed depending on the processing method used. These ingredients could be incorporated into different processed foods, such as snacks, cereal mixtures, cereal bars, and bakery and confectionery products. Air-dried control ingredients presented better nutritional qualities and air-dried sweet cherries with sugar infusion pretreatment could be appropriate ingredients for applications where sweet flavor and slow rehydration rate are required. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

Costs of Public Pharmaceutical Services in Rio de Janeiro Compared to Farmácia Popular Program.

PubMed

Silva, Rondineli Mendes da; Caetano, Rosângela

2016-12-22

To analyze the costs of public pharmaceutical services compared to Farmácia Popular Program (Popular Pharmacy Program). Comparison between prices paid by Aqui Tem Farmácia Popular Program (Farmácia Popular is available here) with the full costs of medicine provision by the Municipal Health Department of Rio de Janeiro. The comparison comprised 25 medicines supplied by both the municipal pharmaceutical service and Aqui Tem Farmácia Popular Program. Calculating the cost per pharmaceutical unit of each medicine included expenditure by Municipal Health Department of Rio de Janeiro with procurement (price), logistics, and local dispensation. The reference price of medicines paid by Aqui Tem Farmácia Popular was taken from the Brazilian Ministry of Health standard in force in 2012. Comparisons included full reference price; reference price minus 10.0% copayment by users; and maximum reference paid by the Ministry of Health (minus copayment and taxes). Simulations were carried out of the differences between the costs of Municipal Health Department of Rio de Janeiro with the common medicines and those potentially incurred based on the reference price of Aqui Tem Farmácia Popular. The Municipal Health Department of Rio de Janeiro spent R$28,526,526.57 with 25 medicines of the common list in 2012; 58.7% accounted for direct procurement costs. The estimated costs of the Health Department were generally lower than the reference prices of the Aqui Tem Farmácia Popular Program for 20 medicines, regardless of reference prices. The potential costs incurred by Health Department if expenditure of its consumption pattern were based on the reference prices of Aqui Tem Farmácia Popular would be R$124,170,777.76, considering the best scenario of payment by the Brazilian Ministry of Health (90.0% of the reference price, minus taxes). The difference in costs between public provision by Municipal Health Department of Rio de Janeiro and Farmácia Popular Program indicates that some reference prices could be reviewed aiming at their reduction. Analisar custos da assistência farmacêutica pública frente ao Programa Farmácia Popular. Comparação entre os valores pagos pelo Programa Aqui Tem Farmácia Popular com os custos integrais relativos à provisão de medicamentos pela Secretaria Municipal de Saúde do Rio de Janeiro. A comparação compreendeu 25 medicamentos, comuns tanto à provisão pela assistência farmacêutica pública municipal quanto pelo Programa Aqui Tem Farmácia Popular. O cálculo do custo unitário por unidade farmacotécnica de cada medicamento envolveu os gastos da Secretaria Municipal de Saúde com custos de aquisição (preço), logísticos e com a dispensação em nível local. O valor de referência dos medicamentos pago pelo Aqui Tem Farmácia Popular foi extraído da norma ministerial em vigor em 2012. As comparações envolveram o valor de referência pleno; valor de referência com desconto dos 10,0% pagos de contrapartida pelos usuários; e valor de referência máximo pago pelo Ministério da Saúde (descontados contrapartida e sem impostos).Foram realizadas simulações das diferenças entre os gastos da Secretaria Municipal de Saúde do Rio de Janeiro com os medicamentos do elenco comum e os que seriam incorridos se esses tivessem sido executados com base no valor de referência do Aqui Tem Farmácia Popular. A Secretaria Municipal de Saúde do Rio de Janeiro gastou R$28.526.526,57 com 25 medicamentos do rol comum em 2012; 58,7% corresponderam a custos diretos com a aquisição dos produtos. Os custos estimados da Secretaria Municipal de Saúde do Rio de Janeiro foram, em geral, menores que os valores de referência do Programa Aqui Tem Farmácia Popular em 20 medicamentos, independentemente dos valores de referência. Os custos que seriam incorridos pela Secretaria Municipal de Saúde do Rio de Janeiro, caso seu padrão de consumo tivesse como valor de pagamento os valores de referência do Aqui Tem Farmácia Popular seriam de R$124.170.777,76 considerando a melhor situação de pagamento pelo Ministério da Saúde (90,0% do valor de referência, com impostos descontados). A diferença de custos entre a provisão pública pela Secretaria Municipal de Saúde do Rio de Janeiro e o Programa Aqui Tem Farmácia Popular sinaliza que alguns valores de referência poderiam ser objetos de exame para sua redução.

Multi-Product Microalgae Biorefineries: From Concept Towards Reality.

PubMed

't Lam, G P; Vermuë, M H; Eppink, M H M; Wijffels, R H; van den Berg, C

2018-02-01

Although microalgae are a promising biobased feedstock, industrial scale production is still far off. To enhance the economic viability of large-scale microalgae processes, all biomass components need to be valorized, requiring a multi-product biorefinery. However, this concept is still too expensive. Typically, downstream processing of industrial biotechnological bulk products accounts for 20-40% of the total production costs, while for a microalgae multi-product biorefinery the costs are substantially higher (50-60%). These costs are high due to the lack of appropriate and mild technologies to access the different product fractions such as proteins, carbohydrates, and lipids. To reduce the costs, simplified processes need to be developed for the main unit operations including harvesting, cell disruption, extraction, and possibly fractionation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Medal of Honor Award Process Review: U.S. Army Noncommissioned Officer Nominee (Redacted)

DTIC Science & Technology

2016-05-04

award the nominee the Silver Star. We determined Secretary McHugh acted within his authority when he decided to award the SS. We found no evidence...why the Honorable John M. McHugh , Secretary of the Army, downgraded the nominee’s MOH award recommendation to the Silver Star (SS).1 In a memorandum...valorous actions as documented in the MOH award 1 The Honorable John M. McHugh left his position as Secretary of the Army on November 1, 2015. 2 We did

Valorization of algal waste via pyrolysis in a fixed-bed reactor: Production and characterization of bio-oil and bio-char.

PubMed

Aboulkas, A; Hammani, H; El Achaby, M; Bilal, E; Barakat, A; El Harfi, K

2017-11-01

The aim of the present work is to develop processes for the production of bio-oil and bio-char from algae waste using the pyrolysis at controlled conditions. The pyrolysis was carried out at different temperatures 400-600°C and different heating rates 5-50°C/min. The algal waste, bio-oil and bio-char were successfully characterized using Elemental analysis, Chemical composition, TGA, FTIR, 1 H NMR, GC-MS and SEM. At a temperature of 500°C and a heating rate of 10°C/min, the maximum yield of bio-oil and bio-char was found to be 24.10 and 44.01wt%, respectively, which was found to be strongly influenced by the temperature variation, and weakly affected by the heating rate variation. Results show that the bio-oil cannot be used as bio-fuel, but can be used as a source of value-added chemicals. On the other hand, the bio-char is a promising candidate for solid fuel applications and for the production of carbon materials. Copyright © 2017 Elsevier Ltd. All rights reserved.

Full-scale performance of selected starch-based biodegradable polymers in sludge dewatering and recommendation for applications.

PubMed

Zhou, Kuangxin; Stüber, Johan; Schubert, Rabea-Luisa; Kabbe, Christian; Barjenbruch, Matthias

2018-01-01

Agricultural reuse of dewatered sludge is a valid route for sludge valorization for small and mid-size wastewater treatment plants (WWTPs) due to the direct utilization of nutrients. A more stringent of German fertilizer ordinance requires the degradation of 20% of the synthetic additives like polymeric substance within two years, which came into force on 1 January 2017. This study assessed the use of starch-based polymers for full-scale dewatering of municipal sewage sludge. The laboratory-scale and pilot-scale trials paved the way for full-scale trials at three WWTPs in Germany. The general feasibility of applying starch-based 'green' polymers in full-scale centrifugation was demonstrated. Depending on the sludge type and the process used, the substitution potential was up to 70%. Substitution of 20-30% of the polyacrylamide (PAM)-based polymer was shown to achieve similar total solids (TS) of the dewatered sludge. Optimization of operational parameters as well as machinery set up in WWTPs is recommended in order to improve the shear stability force of sludge flocs and to achieve higher substitution potential. This study suggests that starch-based biodegradable polymers have great potential as alternatives to synthetic polymers in sludge dewatering.

Windrow co-composting of natural casings waste with sheep manure and dead leaves.

PubMed

Makan, Abdelhadi

2015-08-01

After studying the waste management opportunities in small and medium companies of natural casings, composting has proved more viable and cost effective solution for the valorization of these types of waste, but its feasibility depends on the final product value. This paper investigated a pilot scale program for the windrow co-composting of natural casings waste with sheep manure and dead leaves incorporation. Processing, characterization and application of the final compost were described and the final compost was analyzed for pathogens, metals, nutrients, maturity, and agronomic parameters. The results showed that all test result levels were below the limits specified in the EPA regulations published in Title 40, Section 503, of the Code of Federal Regulations (40 CFR 503). Moreover, the agronomic value tests which include nutrients, organic matter, pH, electrical conductivity, etc. showed that the compost had high organic-matter content and low salt content, all of which indicate good compost characteristics. The ratio of nitrogen (N), phosphorus (P), and potassium (K), or NPK ratio, was measured at 1.6-0.9-0.7. Reported units are consistent with those found on fertilizer formulations. Copyright © 2015 Elsevier Ltd. All rights reserved.

Natural food colourants derived from onion wastes: application in a yoghurt product.

PubMed

Mourtzinos, Ioannis; Prodromidis, Prodromos; Grigorakis, Spyros; Makris, Dimitris P; Biliaderis, Costas G; Moschakis, Thomas

2018-06-10

The valorization of onion (Allium cepa) solid wastes, a 450,000 tonnes/year waste in Europe, by a green extraction method is presented. Polyphenols of onion solid wastes were extracted using eco-friendly solvents, such as water and glycerol. The 2-hydroxypropyl-β-cyclodextrin was also used as a co-solvent for the augmentation of the extraction yield. The process has been optimized by implementing a central composite face centered design of experiments, with two replicates in the central point, taking into consideration the following independent variables: glycerol concentration, cyclodextrin concentration and temperature. The assessment of the extraction model was based on two responses: the total pigment yield and the antiradical capacity. LC-MS analysis was also employed in order to identify polyphenols and colourants of the obtained extracts. The main polyphenols found were quercetin and quercetin derivatives and the main colourant was cyanidin 3-O-glucoside. The extract was also tested as a food colourant in a yoghurt matrix. The onion leaf extract was found to be a stable natural colourant and could be utilized as an alternative ingredient to synthetic coloring agents. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

The effects of taxing sugar-sweetened beverages across different income groups.

PubMed

Sharma, Anurag; Hauck, Katharina; Hollingsworth, Bruce; Siciliani, Luigi

2014-09-01

This paper investigates the impact of sugar-sweetened beverages (SSB) taxes on consumption, bodyweight and tax burden for low-income, middle-income and high-income groups using an Almost Ideal Demand System and 2011 Household level scanner data. A significant contribution of our paper is that we compare two types of SSB taxes recently advocated by policy makers: A 20% flat rate sales (valoric) tax and a 20 cent/L volumetric tax. Censored demand is accounted for using a two-step procedure. We find that the volumetric tax would result in a greater per capita weight loss than the valoric tax (0.41 kg vs. 0.29 kg). The difference between the change in weight is substantial for the target group of heavy purchasers of SSBs in low-income households, with a weight reduction of up to 3.20 kg for the volumetric and 2.06 kg for the valoric tax. The average yearly per capita tax burden on low-income households is $17.87 (0.21% of income) compared with $15.17 for high-income households (0.07% of income) for the valoric tax, and $13.80 (0.15%) and $10.10 (0.04%) for the volumetric tax. Thus, the tax burden is lower, and weight reduction is higher under a volumetric tax. Copyright © 2014 John Wiley & Sons, Ltd.

[In Process Citation].

PubMed

Santos, Carla Adriana; Fonseca, Jorge; Carolino, Elisabete; Lopes, Teresa; Sousa Guerreiro, António

2016-03-25

Introducción y objetivos: el cobre (Cu) es un oligoelemento muy estudiado, pero poco se sabe de su evolución en los pacientes alimentados por gastrostomía endoscópica (GEP). Pretendemos evaluar la evolución del Cu sérico desde la gastrostomía hasta 12 semanas después de la intervención en estos pacientes alimentados con preparaciones domésticas.  Métodos: realizamos un estudio observacional prospectivo para evaluar el Cu sérico, la albúmina, la transferrina y el índice de masa corporal (IMC) en el momento de la GEP, tras 4 semanas y 12 semanas después de la intervención. Los datos incluyen edad, género, NRS 2002 y enfermedad subyacente: cánceres de cabeza y cuello (CCC) y disfagia neurológica (DN). Después de la intervención, estos pacientes fueron alimentados conpreparaciones domésticas. Resultados: 146 enfermos (89 hombres), entre 21-95 años: CCC-56, DN-90. Valores de Cu entre 42-160 μg/dl (normal: 70-140 μg/dl); normales 89% (n = 130); bajos 11% (n = 16), albúmina baja: 53% (n = 77), transferrina baja: 65% (n = 94), IMC bajo: 53% (n = 78). Después de 4 semanas: valores normales de Cu en 93% y bajos en 7%, albúmina baja en 34%, transferrina baja en 52%. Tras 12 semanas: valores normales de Cu en 95% y bajos en 5%, albúmina baja en 25%, transferrina baja en 32%. No encontramos diferencias significativas en el Cusérico cuando se compara edad, género, enfermedad subyacente, IMC, albúmina y transferrina. Conclusiones: la mayoría de los enfermos presentan Cu sérico normal en el momento de la gastrostomía. Para los enfermos con Cu sérico bajo antes del procedimiento, la alimentación con preparaciones domésticas parece suficiente para su normalización progresiva.

Combinatorial pretreatment and fermentation optimization enabled a record yield on lignin bioconversion.

PubMed

Liu, Zhi-Hua; Xie, Shangxian; Lin, Furong; Jin, Mingjie; Yuan, Joshua S

2018-01-01

Lignin valorization has recently been considered to be an essential process for sustainable and cost-effective biorefineries. Lignin represents a potential new feedstock for value-added products. Oleaginous bacteria such as Rhodococcus opacus can produce intracellular lipids from biodegradation of aromatic substrates. These lipids can be used for biofuel production, which can potentially replace petroleum-derived chemicals. However, the low reactivity of lignin produced from pretreatment and the underdeveloped fermentation technology hindered lignin bioconversion to lipids. In this study, combinatorial pretreatment with an optimized fermentation strategy was evaluated to improve lignin valorization into lipids using R. opacus PD630. As opposed to single pretreatment, combinatorial pretreatment produced a 12.8-75.6% higher lipid concentration in fermentation using lignin as the carbon source. Gas chromatography-mass spectrometry analysis showed that combinatorial pretreatment released more aromatic monomers, which could be more readily utilized by lignin-degrading strains. Three detoxification strategies were used to remove potential inhibitors produced from pretreatment. After heating detoxification of the lignin stream, the lipid concentration further increased by 2.9-9.7%. Different fermentation strategies were evaluated in scale-up lipid fermentation using a 2.0-l fermenter. With laccase treatment of the lignin stream produced from combinatorial pretreatment, the highest cell dry weight and lipid concentration were 10.1 and 1.83 g/l, respectively, in fed-batch fermentation, with a total soluble substrate concentration of 40 g/l. The improvement of the lipid fermentation performance may have resulted from lignin depolymerization by the combinatorial pretreatment and laccase treatment, reduced inhibition effects by fed-batch fermentation, adequate oxygen supply, and an accurate pH control in the fermenter. Overall, these results demonstrate that combinatorial pretreatment, together with fermentation optimization, favorably improves lipid production using lignin as the carbon source. Combinatorial pretreatment integrated with fed-batch fermentation was an effective strategy to improve the bioconversion of lignin into lipids, thus facilitating lignin valorization in biorefineries.

EJERCICIO Y LA DETECCION DEL MAL AGUDO DE MONTAÑA GRAVE

PubMed Central

Garófoli, Adrián; Montoya, Paola; Elías, Carlos; Benzo, Roberto

2012-01-01

El Mal Agudo de Montaña (MAM) es un conjunto de síntomas inespecíficos padecidos por sujetos que ascienden rápidamente desde baja a alta altura sin adecuada aclimatación. Usualmente es autolimitado, pero las formas graves (edema pulmonar y cerebral) pueden causar la muerte. La hipoxemia exagerada en reposo está relacionada con el desarrollo de MAM pero su valor predictivo es limitado. Dado que el ejercicio en altura se acompaña de mayor hipoxemia y síntomas, postulamos el valor predictivo de un simple test de ejercicio para pronosticar MAM grave. Se estudió el valor predictivo de la saturación de oxígeno en reposo y ejercicio submáximo a 2 700m y 4 300m en 63 sujetos que ascendían al cerro Aconcagua (6 962m). Se consideró desaturación de oxígeno con ejercicio a una disminución >=5% respecto al reposo. Se utilizó la escala de Lake-Louise para establecer la presencia de MAM grave. 6 sujetos presentaron MAM grave (9.5%) y requirieron evacuación. La saturación de oxígeno en reposo a 2 700m no fue significativa para clasificar sujetos que luego desarrollaron MAM grave. Por el contrario, la asociación de desaturación durante el ejercicio a 2 700m más la saturación inapropiada en reposo a 4 300m fue significativa para clasificar a los sujetos que desarrollaron MAM grave con un valor predictivo positivo de 80% y un valor predictivo negativo del 97%. Nuestros resultados son relevantes para el montañismo y sugieren la adición de un simple test de ejercicio en la predicción del MAM grave. PMID:20228017

[Not Available].

PubMed

De Arriba Muñoz, Antonio; López Úbeda, Marta; Rueda Caballero, Carmen; Labarta Aizpún, José Ignacio; Ferrández Longás, Ángel

2016-07-19

Introducción: saber diagnosticar y tratar la obesidad se ha convertido en el mayor reto del siglo XXI, debido al aumento de su prevalencia.Objetivos: determinar los valores de normalidad de perímetro abdominal (PA) e índice de masa corporal (IMC) según edad y sexo en población española sana.Métodos: estudio longitudinal observacional realizado entre 1980 y 2014. Se incluyeron 165 niños y 169 niñas recién nacidas, recogiendo datos de forma anual hasta los 18 años (74 varones y 92 mujeres), y posteriormente a los 28 años (42 varones y 45 mujeres). Se realizó medición de peso, longitud/talla y perímetro abdominal. Se calcularon los percentiles (P3, P10, P25, P50, P75, P90, P97) de IMC y PA según edad y sexo.Resultados: se presentan datos evolutivos de IMC y PA durante la infancia, destacando cómo aumentan los valores entre los 18 y 28 años de los percentiles superiores al p50, sobre todo en mujeres. Existe una correlación positiva en relación al PA entre el valor obtenido a los 3 años con el valor de los 18 años y de los 28 años tanto en varones (r = 0,722 y r = 0,605, p = 0,000, respectivamente) como en mujeres(r = 0,922, r = 0,857, p = 0,000, respectivamente). Y entre los 18 y 28 años (r = 0,731, p = 0,000 para varones y r = 0,961, p = 0,000 para mujeres).Conclusión: se presentan valores de normalidad de PA e IMC según edad y sexo, que podrán utilizarse como herramienta de referencia para identificar a personas con riesgo de desarrollar enfermedades cardiovasculares o diabetes.

Patient safety in organizational culture as perceived by leaderships of hospital institutions with different types of administration.

PubMed

Silva, Natasha Dejigov Monteiro da; Barbosa, Antonio Pires; Padilha, Kátia Grillo; Malik, Ana Maria

2016-01-01

To identify the perceptions of leaderships toward patient safety culture dimensions in the routine of hospitals with different administrative profiles: government, social and private organizations, and make correlations among participating institutions regarding dimensions of patient safety culture used. A quantitative cross-sectional study that used the Self Assessment Questionnaire 30 translated into Portuguese. The data were processed by analysis of variance (ANOVA) in addition to descriptive statistics, with statistical significance set at p-value ≤ 0.05. According to the participants' perceptions, the significant dimensions of patient safety culture were 'patient safety climate' and 'organizational learning', with 81% explanatory power. Mean scores showed that among private organizations, higher values were attributed to statements; however, the correlation between dimensions was stronger among government hospitals. Different hospital organizations present distinct values for each dimension of patient safety culture and their investigation enables professionals to identify which dimensions need to be introduced or improved to increase patient safety. Identificar percepções das lideranças sobre as dimensões da cultura de segurança do paciente no cotidiano de hospitais de diferentes perfis administrativos: públicos, organizações sociais e privados, e realizar correlação entre as instituições participantes, de acordo com as dimensões da cultura de segurança do paciente utilizadas. Estudo transversal de aspecto quantitativo obtido por meio da aplicação do instrumento Self Assessment Questionnaire 30, traduzido para a língua portuguesa. Os dados foram tratados com análise de variância (ANOVA), além das estatísticas descritivas, considerando como de significância estatística valores de p-valor ≤ 0,05. Segundo a percepção dos participantes do estudo, as dimensões significativas para a cultura de segurança do paciente foram Ambiente de Segurança do Paciente e Aprendizado Organizacional, com poder explicativo de 81%. A média de respostas obtidas evidenciou que nas organizações privadas houve maiores valores atribuídos às questões, porém a correlação entre as dimensões foi mais forte nas organizações públicas. As dimensões da cultura de segurança do paciente têm valores distintos nas diferentes organizações hospitalares e a sua investigação possibilita identificar quais necessitam ser introduzidas ou aprimoradas para maior segurança do paciente.

Bio-based thermosetting epoxy foam: Tannic acid valorization toward dye-decontaminating and thermo-protecting applications.

PubMed

Esmaeili, N; Salimi, A; Zohuriaan-Mehr, M J; Vafayan, M; Meyer, W

2018-05-23

Bio-resourced thermosetting epoxy foam was synthesized from tannic acid toward two different applications e.g., dye-decontaminating and thermo-insulating. Epoxidized tannic acid (ETA) foam was produced without using of organic volatile compounds or flammable foaming gases. The foam density, thermal conductivity and closed-cell content were studied. Besides, TGA showed high char yield (49% in N 2 and 48.3% in air) at 600 °C accompanied by high LOI (37.1 in N 2 and 36.8 in air). The high thermo-stability and intumescent char yield along with low thermal conductivity recommends the foam suitability for being used as an insulating material. Additionally, sorption of methylene blue onto ETA foam was kinetically investigated. The study of contact time, ionic strength, solution pH, initial sorbate concentration and desorption revealed the dependency of the sorption process to pH and initial sorbate concentration. The experimental data fitted well with the Langmuir isotherm (R 2  = 0.997), yielding maximum sorption capacity of 36.25 mg/g (ETA foam = 0.05 g, pH = 7, MB concentration = 50 ppm, Volume = 25 mL). The kinetic data verified that MB sorption could be represented by the pseudo second-order model. Overall, the ETA foam can be introduced as a candidate for removing cationic pollutants, thermal insulator, and self-extinguishing/intumescent materials. Copyright © 2018 Elsevier B.V. All rights reserved.

Windrow co-composting of natural casings waste with sheep manure and dead leaves

DOE Office of Scientific and Technical Information (OSTI.GOV)

Makan, Abdelhadi, E-mail: abdelhadi.makan@gmail.com

Highlights: • Waste management opportunities in small and medium companies were highlighted. • Pilot scale program for windrow co-composting of natural casings was investigated. • Compost preparation, characterization and application phases were discussed. • Natural casings co-composting has proved more viable and cost effective solution. - Abstract: After studying the waste management opportunities in small and medium companies of natural casings, composting has proved more viable and cost effective solution for the valorization of these types of waste, but its feasibility depends on the final product value. This paper investigated a pilot scale program for the windrow co-composting of naturalmore » casings waste with sheep manure and dead leaves incorporation. Processing, characterization and application of the final compost were described and the final compost was analyzed for pathogens, metals, nutrients, maturity, and agronomic parameters. The results showed that all test result levels were below the limits specified in the EPA regulations published in Title 40, Section 503, of the Code of Federal Regulations (40 CFR 503). Moreover, the agronomic value tests which include nutrients, organic matter, pH, electrical conductivity, etc. showed that the compost had high organic-matter content and low salt content, all of which indicate good compost characteristics. The ratio of nitrogen (N), phosphorus (P), and potassium (K), or NPK ratio, was measured at 1.6–0.9–0.7. Reported units are consistent with those found on fertilizer formulations.« less

Laccase-mediated synthesis of lignin-core hyperbranched copolymers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cannatelli, Mark D.; Ragauskas, Arthur J.

Lignin, one of the major chemical constituents of woody biomass, is the second most abundant biopolymer found in nature. The pulp and paper industry has long produced lignin on the scale of millions of tons annually as a by-product of the pulping process, and the dawn of cellulosic ethanol production has further contributed to this amount. Historically, lignin has been perceived as a waste material and burned as a fuel for the pulping process. But, recent research has been geared toward developing cost-effective technologies to convert lignin into valuable commodities. Attributing to the polyphenolic structure of lignin, enzymatic modification ofmore » its surface using laccases (benzenediol:oxygen oxidoreductases, EC 1.10.3.2) has demonstrated to be highly successful. The current study aims at developing lignin-core hyperbranched copolymers via the laccase-assisted copolymerization of kraft lignin with methylhydroquinone and a trithiol. Based on the physical properties of the resulting material, it is likely that crosslinking reactions have taken place during the drying process to produce a copolymeric network rather than discrete hyperbranched copolymers, with NMR data providing evidence of covalent bonding between monomers. A preliminary thermal analysis data reveals that the copolymeric material possesses a moderate glass transition temperature and exhibits good thermostability, thus may have potential application as a lignin-based thermoplastic. Scanning electron microscopy images confirm the smooth, glossy surface of the material and that it is densely packed. Our results are a sustainable, ecofriendly, economic method to create an exciting novel biomaterial from a renewable feedstock while further enhancing lignin valorization.« less

Laccase-mediated synthesis of lignin-core hyperbranched copolymers

DOE PAGES

Cannatelli, Mark D.; Ragauskas, Arthur J.

2017-06-06

Lignin, one of the major chemical constituents of woody biomass, is the second most abundant biopolymer found in nature. The pulp and paper industry has long produced lignin on the scale of millions of tons annually as a by-product of the pulping process, and the dawn of cellulosic ethanol production has further contributed to this amount. Historically, lignin has been perceived as a waste material and burned as a fuel for the pulping process. But, recent research has been geared toward developing cost-effective technologies to convert lignin into valuable commodities. Attributing to the polyphenolic structure of lignin, enzymatic modification ofmore » its surface using laccases (benzenediol:oxygen oxidoreductases, EC 1.10.3.2) has demonstrated to be highly successful. The current study aims at developing lignin-core hyperbranched copolymers via the laccase-assisted copolymerization of kraft lignin with methylhydroquinone and a trithiol. Based on the physical properties of the resulting material, it is likely that crosslinking reactions have taken place during the drying process to produce a copolymeric network rather than discrete hyperbranched copolymers, with NMR data providing evidence of covalent bonding between monomers. A preliminary thermal analysis data reveals that the copolymeric material possesses a moderate glass transition temperature and exhibits good thermostability, thus may have potential application as a lignin-based thermoplastic. Scanning electron microscopy images confirm the smooth, glossy surface of the material and that it is densely packed. Our results are a sustainable, ecofriendly, economic method to create an exciting novel biomaterial from a renewable feedstock while further enhancing lignin valorization.« less

Laccase-mediated synthesis of lignin-core hyperbranched copolymers.

PubMed

Cannatelli, Mark D; Ragauskas, Arthur J

2017-08-01

Lignin, one of the major chemical constituents of woody biomass, is the second most abundant biopolymer found in nature. The pulp and paper industry has long produced lignin on the scale of millions of tons annually as a by-product of the pulping process, and the dawn of cellulosic ethanol production has further contributed to this amount. Historically, lignin has been perceived as a waste material and burned as a fuel for the pulping process. However, recent research has been geared toward developing cost-effective technologies to convert lignin into valuable commodities. Attributing to the polyphenolic structure of lignin, enzymatic modification of its surface using laccases (benzenediol:oxygen oxidoreductases, EC 1.10.3.2) has demonstrated to be highly successful. The current study aims at developing lignin-core hyperbranched copolymers via the laccase-assisted copolymerization of kraft lignin with methylhydroquinone and a trithiol. Based on the physical properties of the resulting material, it is likely that crosslinking reactions have taken place during the drying process to produce a copolymeric network rather than discrete hyperbranched copolymers, with NMR data providing evidence of covalent bonding between monomers. Preliminary thermal analysis data reveals that the copolymeric material possesses a moderate glass transition temperature and exhibits good thermostability, thus may have potential application as a lignin-based thermoplastic. Scanning electron microscopy images confirm the smooth, glossy surface of the material and that it is densely packed. The presented results are a sustainable, ecofriendly, economic method to create an exciting novel biomaterial from a renewable feedstock while further enhancing lignin valorization.

Thermochemical Wastewater Valorization via Enhanced Microbial Toxicity Tolerance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beckham, Gregg T; Thelhawadigedara, Lahiru Niroshan Jayakody; Johnson, Christopher W

Thermochemical (TC) biomass conversion processes such as pyrolysis and liquefaction generate considerable amounts of wastewater, which often contains highly toxic compounds that are incredibly challenging to convert via standard wastewater treatment approaches such as anaerobic digestion. These streams represent a cost for TC biorefineries, and a potential valorization opportunity, if effective conversion methods are developed. The primary challenge hindering microbial conversion of TC wastewater is toxicity. In this study, we employ a robust bacterium, Pseudomonas putida, with TC wastewater streams to demonstrate that aldehydes are the most inhibitory compounds in these streams. Proteomics, transcriptomics, and fluorescence-based immunoassays of P. putidamore » grown in a representative wastewater stream indicate that stress results from protein damage, which we hypothesize is a primary toxicity mechanism. Constitutive overexpression of the chaperone genes, groEL, groES, and clpB, in a genome-reduced P. putida strain improves the tolerance towards multiple TC wastewater samples up to 200-fold. Moreover, the concentration ranges of TC wastewater are industrially relevant for further bioprocess development for all wastewater streams examined here, representing different TC process configurations. Furthermore, we demonstrate proof-of-concept polyhydroxyalkanoate production from the usable carbon in an exemplary TC wastewater stream. Overall, this study demonstrates that protein quality control machinery and repair mechanisms can enable substantial gains in microbial tolerance to highly toxic substrates, including heterogeneous waste streams. When coupled to other metabolic engineering advances such as expanded substrate utilization and enhanced product accumulation, this study generally enables new strategies for biological conversion of highly-toxic, organic-rich wastewater via engineered aerobic monocultures or designer consortia.« less

The effect of feed composition on anaerobic co-digestion of animal-processing by-products.

PubMed

Hidalgo, D; Martín-Marroquín, J M; Corona, F

2018-06-15

Four streams and their mixtures have been considered for anaerobic co-digestion, all of them generated during pig carcasses processing or in related industrial activities: meat flour (MF), process water (PW), pig manure (PM) and glycerin (GL). Biochemical methane potential assays were conducted at 37 °C to evaluate the effects of the substrate mix ratio on methane generation and process behavior. The results show that the co-digestion of these products favors the anaerobic fermentation process when limiting the amount of meat flour in the mixture to co-digest, which should not exceed 10%. The ratio of other tested substrates is less critical, because different mixtures reach similar values of methane generation. The presence in the mixture of process water contributes to a quick start of the digester, something very interesting when operating an industrial reactor. The analysis of the fraction digested reveals that the four analyzed streams can be, a priori, suitable for agronomic valorization once digested. Copyright © 2017. Published by Elsevier Ltd.

New approach of depollution of solid chromium leather waste by the use of organic chelates: economical and environmental impacts.

PubMed

Malek, Ammar; Hachemi, Messaoud; Didier, Villemin

2009-10-15

Herein, we describe an original novel method which allows the decontamination of the chromium-containing leather wastes to simplify the recovery of its considerable protein fractions. Organic salts and acids such as potassium oxalate, potassium tartrate, acetic and citric acids were tested for their efficiency to separate the chromium from the leather waste. Our investigation is based on the research of the total reversibility of the tanning process, in order to decontaminate the waste without its previous degradation or digestion. The effect of several influential parameters on the treatment process was also studied. Therefore, the action of chemical agents used in decontamination process seems very interesting. The optimal yield of chromium extraction about 95% is obtained. The aim of the present study is to define a preliminary processing of solid leather waste with two main impacts: Removing with reusing chromium in the tanning process with simple, ecological and economic treatment process and potential valorization of the organic matrix of waste decontaminated.

Challenges in the Greener Production of Formates/Formic Acid, Methanol, and DME by Heterogeneously Catalyzed CO2 Hydrogenation Processes

PubMed Central

2017-01-01

The recent advances in the development of heterogeneous catalysts and processes for the direct hydrogenation of CO2 to formate/formic acid, methanol, and dimethyl ether are thoroughly reviewed, with special emphasis on thermodynamics and catalyst design considerations. After introducing the main motivation for the development of such processes, we first summarize the most important aspects of CO2 capture and green routes to produce H2. Once the scene in terms of feedstocks is introduced, we carefully summarize the state of the art in the development of heterogeneous catalysts for these important hydrogenation reactions. Finally, in an attempt to give an order of magnitude regarding CO2 valorization, we critically assess economical aspects of the production of methanol and DME and outline future research and development directions. PMID:28656757

Bright Side of Lignin Depolymerization: Toward New Platform Chemicals

PubMed Central

2018-01-01

Lignin, a major component of lignocellulose, is the largest source of aromatic building blocks on the planet and harbors great potential to serve as starting material for the production of biobased products. Despite the initial challenges associated with the robust and irregular structure of lignin, the valorization of this intriguing aromatic biopolymer has come a long way: recently, many creative strategies emerged that deliver defined products via catalytic or biocatalytic depolymerization in good yields. The purpose of this review is to provide insight into these novel approaches and the potential application of such emerging new structures for the synthesis of biobased polymers or pharmacologically active molecules. Existing strategies for functionalization or defunctionalization of lignin-based compounds are also summarized. Following the whole value chain from raw lignocellulose through depolymerization to application whenever possible, specific lignin-based compounds emerge that could be in the future considered as potential lignin-derived platform chemicals. PMID:29337543

Valorization of Flue Gas by Combining Photocatalytic Gas Pretreatment with Microalgae Production.

PubMed

Eynde, Erik Van; Lenaerts, Britt; Tytgat, Tom; Blust, Ronny; Lenaerts, Silvia

2016-03-01

Utilization of flue gas for algae cultivation seems to be a promising route because flue gas from fossil-fuel combustion processes contains the high amounts of carbon (CO2) and nitrogen (NO) that are required for algae growth. NO is a poor nitrogen source for algae cultivation because of its low reactivity and solublilty in water and its toxicity for algae at high concentrations. Here, we present a novel strategy to valorize NO from flue gas as feedstock for algae production by combining a photocatalytic gas pretreatment unit with a microalgal photobioreactor. The photocatalytic air pretreatment transforms NO gas into NO2 gas and thereby enhances the absorption of NOx in the cultivation broth. The absorbed NOx will form NO2(-) and NO3(-) that can be used as a nitrogen source by algae. The effect of photocatalytic air pretreatment on the growth and biomass productivity of the algae Thalassiosira weissflogii in a semicontinuous system aerated with a model flue gas (1% CO2 and 50 ppm of NO) is investigated during a long-term experiment. The integrated system makes it possible to produce algae with NO from flue gas as the sole nitrogen source and reduces the NOx content in the exhaust gas by 84%.

Accuracy of a pediatric early warning score in the recognition of clinical deterioration.

PubMed

Miranda, Juliana de Oliveira Freitas; Camargo, Climene Laura de; Nascimento, Carlito Lopes; Portela, Daniel Sales; Monaghan, Alan

2017-07-10

to evaluate the accuracy of the version of the Brighton Pediatric Early Warning Score translated and adapted for the Brazilian context, in the recognition of clinical deterioration. a diagnostic test study to measure the accuracy of the Brighton Pediatric Early Warning Score for the Brazilian context, in relation to a reference standard. The sample consisted of 271 children, aged 0 to 10 years, blindly evaluated by a nurse and a physician, specialists in pediatrics, with interval of 5 to 10 minutes between the evaluations, for the application of the Brighton Pediatric Early Warning Score for the Brazilian context and of the reference standard. The data were processed and analyzed using the Statistical Package for the Social Sciences and VassarStats.net programs. The performance of the Brighton Pediatric Early Warning Score for the Brazilian context was evaluated through the indicators of sensitivity, specificity, predictive values, area under the ROC curve, likelihood ratios and post-test probability. the Brighton Pediatric Early Warning Score for the Brazilian context showed sensitivity of 73.9%, specificity of 95.5%, positive predictive value of 73.3%, negative predictive value of 94.7%, area under Receiver Operating Characteristic Curve of 91.9% and the positive post-test probability was 80%. the Brighton Pediatric Early Warning Score for the Brazilian context, presented good performance, considered valid for the recognition of clinical deterioration warning signs of the children studied. avaliar a acurácia da versão traduzida e adaptada do Brighton Paediatric Early Warning Score para o contexto brasileiro, no reconhecimento da deterioração clínica. estudo de teste diagnóstico para medir a acurácia do Brighton Paediatric Early Warning Score, para o contexto brasileiro, em relação a um padrão de referência. A amostra foi composta por 271 crianças de 0 a 10 anos, avaliadas de forma cega por uma enfermeira e um médico, especialistas em pediatria, com intervalo de 5 a 10 minutos entre as avaliações, para aplicação do Brighton Paediatric Early Warning Score, para o contexto brasileiro e do padrão de referência. Os dados foram processados e analisados nos programas Statistical Package for the Social Sciences e VassarStats.net. O desempenho do Brighton Paediatric Early Warning Score para o contexto brasileiro foi avaliado por meio dos indicadores de sensibilidade, especificidade, valores preditivos, área sob a curva ROC, razões de probabilidades e probabilidade pós-teste. o Brighton Paediatric Early Warning Score para o contexto brasileiro apresentou sensibilidade de 73,9%, especificidade de 95,5%, valor preditivo positivo de 73,3%, valor preditivo negativo de 94,7%, área sob a Receiver Operating Characteristic Curve de 91,9% e a probabilidade pós-teste positivo foi de 80%. o Brighton Paediatric Early Warning Score, para o contexto brasileiro, apresentou bom desempenho, considerado válido para o reconhecimento de sinais de alerta de deterioração clínica das crianças estudadas. evaluar la precisión de la versión traducida y adaptada del Brighton Paediatric Early Warning Score para el contexto brasileño, en el reconocimiento de la deterioración clínica. estudio de test diagnóstico para medir la precisión del Brighton Paediatric Early Warning Score para el contexto brasileño, en relación a un estándar de referencia. La muestra estuvo compuesta por 271 niños de 0 a 10 años, evaluadas de forma ciega por especialistas en pediatría, una enfermera y un médico, con intervalo de 5 a 10 minutos entre las evaluaciones, para aplicación del Brighton Paediatric Early Warning Score para el contexto brasileño. Los datos fueron procesados y analizados en los programas Statistical Package for the Social Sciences y VassarStats.net. El desempeño del Brighton Paediatric Early Warning Score para el contexto brasileño fue evaluado por medio de los indicadores de sensibilidad, especificidad, valores predictivos, área debajo de la curva ROC, razones de probabilidades y probabilidad postest. el Brighton Paediatric Early Warning Score para el contexto brasileño presentó sensibilidad de 73,9%, especificidad de 95,5%, valor predictivo positivo de 73,3%, valor predictivo negativo de 94,7%, área bajo la Receiver Operating Characteristic Curve de 91,9% y la probabilidad postest positivo fue de 80%. el Brighton Paediatric Early Warning Score para el contexto brasileño, presentó buen desempeño, considerado válido para el reconocimiento de señales de alerta de deterioración clínica de los niños estudiados.

Lignocentric analysis of a carbohydrate-producing lignocellulosic biorefinery process.

PubMed

Narron, Robert H; Han, Qiang; Park, Sunkyu; Chang, Hou-Min; Jameel, Hasan

2017-10-01

A biologically-based lignocellulosic biorefinery process for obtaining carbohydrates from raw biomass was investigated across six diverse biomasses (three hardwoods & three nonwoods) for the purpose of decoding lignin's influence on sugar production. Acknowledging that lignin could positively alter the economics of an entire process if valorized appropriately, we sought to correlate the chemical properties of lignin within the process to the traditional metrics associated with carbohydrate production-cellulolytic digestibility and total sugar recovery. Based on raw carbohydrate, enzymatic recovery ranged from 40 to 64% w/w and total recovery ranged from 70 to 87% w/w. Using nitrobenzene oxidation to quantify non-condensed lignin structures, it was found that raw hardwoods bearing increasing non-condensed S/V ratios (2.5-5.1) render increasing total carbohydrate recovery from hardwood biomasses. This finding indicates that the chemical structure of hardwood lignin influences the investigated biorefinery process' ability to generate carbohydrates from a given raw hardwood feedstock. Copyright © 2017 Elsevier Ltd. All rights reserved.

CO2 reforming of methane: valorizing CO2 by means of Dielectric Barrier Discharge

NASA Astrophysics Data System (ADS)

Machrafi, H.; Cavadias, S.; Amouroux, J.

2011-03-01

The impact of pollution on the environment is causing several problems that are to be reduced as much as possible. One important example is the production of CO2 that is emitted by many transport and industrial applications. An interesting solution is to view CO2 as a source instead of a product that can be stocked. The case considered in this work is the CO2 reformation of methane producing hydrogen and CO. It is an endothermic reaction, for which the activition barrier needs to be overcome. The method of Dielectric Barrier Discharge can do this efficiently. The process relies on the collision of electrons, which are accelerated under an electrical field that is created in the discharge area. This leads to the formation of reactive species, which facilitate the abovementioned reaction. The determination of the electron density is performed by PLASIMO. The study is subsequently continued using the Reaction Engineering module in COMSOL (with an incorporated kinetic mechanism) in order to model the discharge phase. Then COMSOL (continuity and Navier-Stokes equations) is used to model the flow in the post-discharge phase. The results showed that both a 2D and 3D model can be used to model the chemical-plasma process. These methods need strongly reduced kinetic mechanism, which in some cases can cause loss of precision. It is also observed that the present experimental set-up that is modeled needs to be improved. A suggestion is made.

Biorefinery of microalgae - opportunities and constraints for different production scenarios.

PubMed

Hariskos, Ioanna; Posten, Clemens

2014-06-01

In order to design economically feasible production processes it is necessary, as part of the biorefinery concept, to valorize all constituents of the microalgal biomass. Such an approach requires appropriate biorefinery side-process strategies to be adapted to production of the primary product. These strategies are particularly valid for microalgae, since the composition and amount of residual biomass can vary significantly depending on cell stoichiometry and cultivation techniques. This review investigates opportunities and constraints for biorefinery concepts in production scenarios for four different products from microalgae with different market volumes, including high- and medium-value products, whole cells and biodiesel. Approaches to close material and energy balances, as well as to adapt the biorefinery according to biological potential, process routes, and market needs are presented, which will further contribute to making the biorefinery concept a success. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The elimination of siloxanes from the biogas of a wastewater treatment plant by means of an adsorption process.

PubMed

Trapote, Arturo; García, Mariano; Prats, Daniel

2016-12-01

Siloxanes present in the biogas produced during anaerobic digestion in wastewater treatment plants (WWTPs) can damage the mechanism of cogeneration heat engines and obstruct the process of energy valorization. The objective of this research is to detect the presence of siloxanes in the biogas and evaluate a procedure for their elimination. A breakthrough curve of a synthetic decamethylcyclopentasiloxane on an experimental bed of activated carbon was modeled and the theoretical mathematical model of the adsorption process was adjusted. As a result, the constants of the model were obtained: the mass transfer constant, Henry's equilibrium constant, and the Eddy diffusion. The procedure developed allows the adsorption equilibrium of siloxanes on activated carbon to be predicted, and makes it possible to lay the basis for the design of an appropriate activated carbon module for the elimination of siloxanes in a WWTP.

A Review of Biorefinery Separations for Bioproduct Production via Thermocatalytic Processing.

PubMed

Nguyen, Hannah; DeJaco, Robert F; Mittal, Nitish; Siepmann, J Ilja; Tsapatsis, Michael; Snyder, Mark A; Fan, Wei; Saha, Basudeb; Vlachos, Dionisios G

2017-06-07

With technological advancement of thermocatalytic processes for valorizing renewable biomass carbon, development of effective separation technologies for selective recovery of bioproducts from complex reaction media and their purification becomes essential. The high thermal sensitivity of biomass intermediates and their low volatility and high reactivity, along with the use of dilute solutions, make the bioproducts separations energy intensive and expensive. Novel separation techniques, including solvent extraction in biphasic systems and reactive adsorption using zeolite and carbon sorbents, membranes, and chromatography, have been developed. In parallel with experimental efforts, multiscale simulations have been reported for predicting solvent selection and adsorption separation. We discuss various separations that are potentially valuable to future biorefineries and the factors controlling separation performance. Particular emphasis is given to current gaps and opportunities for future development.

Valorization of titanium metal wastes as tanning agent used in leather industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crudu, Marian, E-mail: mariancrudu@yahoo.com; Deselnicu, Viorica, E-mail: viorica.deselnicu@icpi.ro; Deselnicu, Dana Corina, E-mail: d_deselnicu@yahoo.com

2014-10-15

Highlights: • Valorization of titanium wastes which cannot be recycled in metallurgical industry. • Transferring Ti waste into raw materials for obtaining Ti based tanning agent. • Characterization of new Ti based tanning agents and leather tanned with them. • Characterization of sewage waste water and sludge resulted from leather manufacture. • Analysis of the impact of main metal component of Ti waste. - Abstract: The development of new tanning agents and new technologies in the leather sector is required to cope with the increasingly higher environmental pressure on the current tanning materials and processes such as tanning with chromiummore » salts. In this paper, the use of titanium wastes (cuttings) resulting from the process of obtaining highly pure titanium (ingots), for the synthesis of new tanning agent and tanning bovine hides with new tanning agent, as alternative to tanning with chromium salts are investigated. For this purpose, Ti waste and Ti-based tanning agent were characterized for metal content by inductively coupled plasma mass spectrometry (ICP-MS) and chemical analysis; the tanned leather (wet white leather) was characterized by Scanning Electron Microscope/Energy Dispersive Using X-ray (Analysis). SEM/EDX analysis for metal content; Differential scanning calorimetric (DSC), Micro-Hot-Table and standard shrinkage temperature showing a hydrothermal stability (ranged from 75.3 to 77 °C) and chemical analysis showing the leather is tanned and can be processed through the subsequent mechanical operations (splitting, shaving). On the other hand, an analysis of major minor trace substances from Ti-end waste (especially vanadium content) in new tanning agent and wet white leather (not detected) and residue stream was performed and showed that leachability of vanadium is acceptable. The results obtained show that new tanning agent obtained from Ti end waste can be used for tanning bovine hides, as eco-friendly alternative for chrome tanning.« less

Hydrolysates of Fish Skin Collagen: An Opportunity for Valorizing Fish Industry Byproducts.

PubMed

Blanco, María; Vázquez, José Antonio; Pérez-Martín, Ricardo I; Sotelo, Carmen G

2017-05-05

During fish processing operations, such as skinning and filleting, the removal of collagen-containing materials can account for up to 30% of the total fish byproducts. Collagen is the main structural protein in skin, representing up to 70% of dry weight depending on the species, age and season. It has a wide range of applications including cosmetic, pharmaceutical, food industry, and medical. In the present work, collagen was obtained by pepsin extraction from the skin of two species of teleost and two species of chondrychtyes with yields varying between 14.16% and 61.17%. The storage conditions of the skins appear to influence these collagen extractions yields. Pepsin soluble collagen (PSC) was enzymatically hydrolyzed and the resultant hydrolysates were ultrafiltrated and characterized. Electrophoretic patterns showed the typical composition of type I collagen, with denaturation temperatures ranged between 23 °C and 33 °C. In terms of antioxidant capacity, results revealed significant intraspecific differences between hydrolysates, retentate, and permeate fractions when using β -Carotene and DPPH methods and also showed interspecies differences between those fractions when using DPPH and ABTS methods. Under controlled conditions, PSC hydrolysates from Prionace glauca , Scyliorhinus canicula , Xiphias gladius, and Thunnus albacares provide a valuable source of peptides with antioxidant capacities constituting a feasible way to efficiently upgrade fish skin biomass.

Hydrolysates of Fish Skin Collagen: An Opportunity for Valorizing Fish Industry Byproducts

PubMed Central

Blanco, María; Vázquez, José Antonio; Pérez-Martín, Ricardo I.; Sotelo, Carmen G.

2017-01-01

During fish processing operations, such as skinning and filleting, the removal of collagen-containing materials can account for up to 30% of the total fish byproducts. Collagen is the main structural protein in skin, representing up to 70% of dry weight depending on the species, age and season. It has a wide range of applications including cosmetic, pharmaceutical, food industry, and medical. In the present work, collagen was obtained by pepsin extraction from the skin of two species of teleost and two species of chondrychtyes with yields varying between 14.16% and 61.17%. The storage conditions of the skins appear to influence these collagen extractions yields. Pepsin soluble collagen (PSC) was enzymatically hydrolyzed and the resultant hydrolysates were ultrafiltrated and characterized. Electrophoretic patterns showed the typical composition of type I collagen, with denaturation temperatures ranged between 23 °C and 33 °C. In terms of antioxidant capacity, results revealed significant intraspecific differences between hydrolysates, retentate, and permeate fractions when using β-Carotene and DPPH methods and also showed interspecies differences between those fractions when using DPPH and ABTS methods. Under controlled conditions, PSC hydrolysates from Prionace glauca, Scyliorhinus canicula, Xiphias gladius, and Thunnus albacares provide a valuable source of peptides with antioxidant capacities constituting a feasible way to efficiently upgrade fish skin biomass. PMID:28475143

Innovative method for recovery and valorization of hydroxytyrosol from olive mill wastewaters.

PubMed

Bonetti, A; Venturini, S; Ena, A; Faraloni, C

2016-01-01

The nutritional properties of olive oil can be attributed to its oleic acid and phenolic compounds content, acting as natural oxidants to prevent human diseases. In particular, hydroxytyrosol has an anti-inflammatory action similar to omega 3 fatty acids from fish oil. The olive oil production was conducted by two extraction procedures: first, a two-phase extraction giving extra-virgin olive oil and humid pomace, second, a three-phase working process of humid pomace, obtaining another minimum quantity of extra-virgin olive oil, 'dry' pomace devoid of polyphenols, and mill wastewaters rich in anti-oxidant compounds. The aim of this processing was to employ water to extract the highest concentration of polyphenols from humid pomace and convey them in oil mill wastewaters for extraction. Processed olives were 37,200 kg, pomace deprived of polyphenols was equal to 20,400 kg and processing was performed with 500 kg of olives per hour. This method offers advantages of using cheap equipment and technical simplicity.

Base-Catalyzed Depolymerization of Biorefinery Lignins

DOE PAGES

Katahira, Rui; Mittal, Ashutosh; McKinney, Kellene; ...

2016-01-12

Lignocellulosic biorefineries will produce a substantial pool of lignin-enriched residues, which are currently slated to be burned for heat and power. Going forward, however, valorization strategies for residual solid lignin will be essential to the economic viability of modern biorefineries. To achieve these strategies, effective lignin depolymerization processes will be required that can convert specific lignin-enriched biorefinery substrates into products of sufficient value and market size. Base-catalyzed depolymerization (BCD) of lignin using sodium hydroxide and other basic media has been shown to be an effective depolymerization approach when using technical and isolated lignins relevant to the pulp and paper industry.more » Moreover, to gain insights in the application of BCD to lignin-rich, biofuels-relevant residues, here we apply BCD with sodium hydroxide at two catalyst loadings and temperatures of 270, 300, and 330 °C for 40 min to residual biomass from typical and emerging biochemical conversion processes. We obtained mass balances for each fraction from BCD, and characterized the resulting aqueous and solid residues using gel permeation chromatography, NMR, and GC–MS. When taken together, these results indicate that a significant fraction (45–78%) of the starting lignin-rich material can be depolymerized to low molecular weight, water-soluble species. The yield of the aqueous soluble fraction depends significantly on biomass processing method used prior to BCD. Namely, dilute acid pretreatment results in lower water-soluble yields compared to biomass processing that involves no acid pretreatment. We also find that the BCD product selectivity can be tuned with temperature to give higher yields of methoxyphenols at lower temperature, and a higher relative content of benzenediols with a greater extent of alkylation on the aromatic rings at higher temperature. Our study shows that residual, lignin-rich biomass produced from conventional and emerging biochemical conversion processes can be depolymerized with sodium hydroxide to produce significant yields of low molecular weight aromatics that potentially can be upgraded to fuels or chemicals.« less

Base-Catalyzed Depolymerization of Biorefinery Lignins

DOE Office of Scientific and Technical Information (OSTI.GOV)

Katahira, Rui; Mittal, Ashutosh; McKinney, Kellene

Lignocellulosic biorefineries will produce a substantial pool of lignin-enriched residues, which are currently slated to be burned for heat and power. Going forward, however, valorization strategies for residual solid lignin will be essential to the economic viability of modern biorefineries. To achieve these strategies, effective lignin depolymerization processes will be required that can convert specific lignin-enriched biorefinery substrates into products of sufficient value and market size. Base-catalyzed depolymerization (BCD) of lignin using sodium hydroxide and other basic media has been shown to be an effective depolymerization approach when using technical and isolated lignins relevant to the pulp and paper industry.more » Moreover, to gain insights in the application of BCD to lignin-rich, biofuels-relevant residues, here we apply BCD with sodium hydroxide at two catalyst loadings and temperatures of 270, 300, and 330 °C for 40 min to residual biomass from typical and emerging biochemical conversion processes. We obtained mass balances for each fraction from BCD, and characterized the resulting aqueous and solid residues using gel permeation chromatography, NMR, and GC–MS. When taken together, these results indicate that a significant fraction (45–78%) of the starting lignin-rich material can be depolymerized to low molecular weight, water-soluble species. The yield of the aqueous soluble fraction depends significantly on biomass processing method used prior to BCD. Namely, dilute acid pretreatment results in lower water-soluble yields compared to biomass processing that involves no acid pretreatment. We also find that the BCD product selectivity can be tuned with temperature to give higher yields of methoxyphenols at lower temperature, and a higher relative content of benzenediols with a greater extent of alkylation on the aromatic rings at higher temperature. Our study shows that residual, lignin-rich biomass produced from conventional and emerging biochemical conversion processes can be depolymerized with sodium hydroxide to produce significant yields of low molecular weight aromatics that potentially can be upgraded to fuels or chemicals.« less

[ARIA Mexico 2014. Adaptation of the Clinical Practice Guide ARIA 2010 for Mexico. Methodology ADAPTE].

PubMed

Larenas-Linnemann, Désirée; Mayorga-Butrón, José Luis; Sánchez-González, Andrés; Ramírez-García, Arturo; Medina-Ávalos, Miguel; Figueroa-Morales, Marco Antonio; Montaño-Velázquez, B Beatriz; Montes-Narváez, Gabriel; Romero-Tapia, Sergio; Stone-Aguilar, Héctor; Xochihua-Díaz, Luis; Salas-Hernández, Jorge; Hernán-Ruiz, Héctor; Betancourt-Suárez, Miguel A; Cano-Salas, María Carmen; Curiel-Aceves, Lorenzo; Dibildox-Martínez, Javier; Fernández-Vega, Margarita; García-Bolaños, Carlos; Iduñate-Palacios, Fernando; Jiménez-Chobillon, M Alejandro; López-Lizárraga, Doris N; Matta-Campos, Juan José; Olvera-Salinas, Jorge; Rivera-Gómez, María Antonia; Virgen-Ortega, César; Sienra-Monge, Juan José; Del Río-Navarro, Blanca; Arias-Cruz, Alfredo; Sacre-Hazouri, Antonio; Aguilar-Aranda, Ambrocio; Vásquez Del Mercado-Cordero, Rodrigo; Barnica, Raúl Humberto; Velasco-Hidalgo, Liliana; Solís-Galicia, Cecilia

2014-01-01

The global prevalence of allergic rhinitis is high. International Study of Asthma and Allergies in Childhood (ISAAC) Phase III reports a total estimated prevalence of 4.6% in Mexico. There is evidence based on allergic rhinitis Clinical Practice Guidelines (CPG), but its promotion, acceptance and application is not optimal or adequate in Mexico. To generate a guideline for the treatment of allergic rhinitis and its impact on asthma by adaptating the 2010 ARIA Guideline to Mexican reality, through a transculturation process applying the ADAPTE methodology. Using the ADAPTE Methodology, the original 2010 ARIA CPG recommendations were evaluated by the guideline development group (GDG) into which multiple medical specialities managing patients with allergic rhinitis were incoorporated. The GDG valorated the quality of 2010 ARIA, checked and translated key clinical questions. Moreover, the GDG adjusted recommendations, patient preferences and included comments in the context of the Mexican reality (safety, costs and cultural issues). To accomplish this, we ran Delphi panels with as many rounds as necessary to reach agreement. One extra question, not included in the original 2010 ARIA, on the use of Nasal Lavages for AR was created sustained by a systematic literature review. A total of 45 questions from the original 2010 ARIA were included and divided into six groups covering prevention, medical treatment, immunotherapy and alternative medicine to treat patients with allergic rhinitis with or without asthma. Most of the questions reached agreement in one or two rounds; one question required three rounds. An easy-to-use, adaptated, up-to-date and applicable allergic rhinitis guideline for Mexico is now available.

Development of green extraction processes for Nannochloropsis gaditana biomass valorization.

PubMed

Sánchez-Camargo, Andrea Del Pilar; Pleite, Natalia; Mendiola, José Antonio; Cifuentes, Alejandro; Herrero, Miguel; Gilbert-López, Bienvenida; Ibáñez, Elena

2018-04-23

In the present work, the valorization of Nannochloropsis gaditana biomass is proposed within the concept of biorefinery. To this aim, high-pressure homogenization (HPH) was used to break down the strong cell wall and supercritical fluid extraction (SFE) with pure CO 2 was applied as a first step to extract valuable compounds (such as non-polar lipids and pigments). Extraction of the remaining residue for the recovery of bioactive compounds was studied by means of an experimental design based on response surface methodology (RSM) employing pressurized liquid extraction (PLE) with green solvents such as water and ethanol. Optimum extract was achieved with pure ethanol at 170°C for 20 min, providing an important antioxidant capacity (0.72 ± 0.03 mmol trolox eq g -1 extract). Complete chemical characterization of the optimum extract was carried out by using different chromatographic methods such as reverse-phase high-performance liquid chromatography with diode array detection (RP-HPLC-DAD), normal-phase HPLC with evaporative light scattering detection (NP-HPLC-ELSD) and gas chromatography coupled to mass spectrometry detection (GC-MS); carotenoids (e.g. violaxanthin), chlorophylls and polar lipids were the main compounds observed while palmitoleic, palmitic, myristic acids and the polyunsaturated eicosapentanoic (EPA) acid were the predominant fatty acids in all PLE extracts. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Olive pomace valorization by Aspergillus species: lipase production using solid-state fermentation.

PubMed

Oliveira, Felisbela; Moreira, Cláudia; Salgado, José Manuel; Abrunhosa, Luís; Venâncio, Armando; Belo, Isabel

2016-08-01

Pollution by olive mill wastes is an important problem in the Mediterranean area and novel solutions for their proper management and valorization are needed. The aim of this work was to optimize a solid-state fermentation (SSF) process to produce lipase using olive pomace (OP) as the main source of nutrients by several Aspergillus spp. Optimized variables in two different designs were: ratio between olive pomace and wheat bran (OP:WB), NaNO3 , Czapek nutrients, fermentation time, moisture content (MC) and temperature. Results showed that the mixture OP:WB and MC were the most significant factors affecting lipase production for all fungi strains tested. With MC and temperature optimization, a 4.4-fold increase in A. ibericus lipase was achieved (90.5 ± 1.5 U g(-1) ), using a mixture of OP and WB at 1:1 ratio, 0.02 g NaNO3 g(-1) dry substrate, absence of Czapek nutrients, 60% of MC and incubation at 30 °C for 7 days. For A. niger and A. tubingensis, highest lipase activity obtained was 56.6 ± 5.4 and 7.6 ± 0.6 U g(-1) , respectively. Aspergillus ibericus was found to be the most promising microorganism for lipase production using mixtures of OP and WB. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

Strategies for the enhancement of automobile shredder residues (ASRs) recycling: results and cost assessment.

PubMed

Ruffino, Barbara; Fiore, Silvia; Zanetti, Maria Chiara

2014-01-01

With reference to the European regulation about the management of End-of-Life Vehicles (ELVs), Directive 2000/53/EC imposes the achievement of a recycling target of 85%, and 95% of total recovery by 2015. Over the last few years many efforts have been made to find solutions to properly manage the waste coming from ELVs with the aim of complying with the targets fixed by the Directive. This paper focuses on the economical evaluation of a treatment process, that includes physical (size and density), magnetic and electrical separations, performed on the light fraction of the automobile shredder residue (ASR) with the aim of reducing the amount of waste to dispose of in a landfill and enhancing the recovery of valuable fractions as stated by the EU Directive. The afore mentioned process is able to enhance the recovery of ferrous and non-ferrous metals of an amount equal to about 1% b.w. (by weight) of the ELV weight, and to separate a high energetic-content product suitable for thermal valorization for an amount close to (but not higher than) 10% b.w. of the ELV weight. The results of the economical assessment led to annual operating costs of the treatment ranging from 300,000 €/y to 350,000 €/y. Since the considered plant treats about 13,500 metrictons of ASR per year, this would correspond to an operating cost of approximately 20-25 €/t. Taking into account the amount and the selling price of the scrap iron and of the non magnetic metal recovered by the process, thus leading to a gain of about 30 €/t per ton of light ASR treated, the cost of the recovery process is balanced by the profit from the selling of the recovered metals. On the other hand, the proposed treatment is able to achieve the fulfillment of the targets stated by Directive 2000/53/EC concerning thermal valorization and reduce the amount of waste generated from ELV shredding to landfill. Copyright © 2013 Elsevier Ltd. All rights reserved.

Highly valuable microalgae: biochemical and topological aspects.

PubMed

Pignolet, Olivier; Jubeau, Sébastien; Vaca-Garcia, Carlos; Michaud, Philippe

2013-08-01

The past decade has seen a surge in the interest in microalgae culture for biodiesel production and other applications as renewable biofuels as an alternative to petroleum transport fuels. The development of new technologies for the culture of these photosynthetic microorganisms and improved knowledge of their biochemical composition has spurred innovation in the field of high-value biomolecules. These developments are only economically viable if all the microalgae fractions are valorized in a biorefinery strategy. Achieving this objective requires an understanding of microalgae content and the cellular localization of the main biomolecular families in order to develop efficient harvest and sequential recovery technologies. This review summarizes the state of the art in microalgae compositions and topologies using some examples of the main industrially farmed microalgae.

Microalgal lipids biochemistry and biotechnological perspectives.

PubMed

Bellou, Stamatia; Baeshen, Mohammed N; Elazzazy, Ahmed M; Aggeli, Dimitra; Sayegh, Fotoon; Aggelis, George

2014-12-01

In the last few years, there has been an intense interest in using microalgal lipids in food, chemical and pharmaceutical industries and cosmetology, while a noteworthy research has been performed focusing on all aspects of microalgal lipid production. This includes basic research on the pathways of solar energy conversion and on lipid biosynthesis and catabolism, and applied research dealing with the various biological and technical bottlenecks of the lipid production process. In here, we review the current knowledge in microalgal lipids with respect to their metabolism and various biotechnological applications, and we discuss potential future perspectives. The committing step in fatty acid biosynthesis is the carboxylation of acetyl-CoA to form malonyl-CoA that is then introduced in the fatty acid synthesis cycle leading to the formation of palmitic and stearic acids. Oleic acid may also be synthesized after stearic acid desaturation while further conversions of the fatty acids (i.e. desaturations, elongations) occur after their esterification with structural lipids of both plastids and the endoplasmic reticulum. The aliphatic chains are also used as building blocks for structuring storage acylglycerols via the Kennedy pathway. Current research, aiming to enhance lipogenesis in the microalgal cell, is focusing on over-expressing key-enzymes involved in the earlier steps of the pathway of fatty acid synthesis. A complementary plan would be the repression of lipid catabolism by down-regulating acylglycerol hydrolysis and/or β-oxidation. The tendency of oleaginous microalgae to synthesize, apart from lipids, significant amounts of other energy-rich compounds such as sugars, in processes competitive to lipogenesis, deserves attention since the lipid yield may be considerably increased by blocking competitive metabolic pathways. The majority of microalgal production occurs in outdoor cultivation and for this reason biotechnological applications face some difficulties. Therefore, algal production systems need to be improved and harvesting systems need to be more effective in order for their industrial applications to become more competitive and economically viable. Besides, a reduction of the production cost of microalgal lipids can be achieved by combining lipid production with other commercial applications. The combined production of bioactive products and lipids, when possible, can support the commercial viability of both processes. Hydrophobic compounds can be extracted simultaneously with lipids and then purified, while hydrophilic compounds such as proteins and sugars may be extracted from the defatted biomass. The microalgae also have applications in environmental biotechnology since they can be used for bioremediation of wastewater and to monitor environmental toxicants. Algal biomass produced during wastewater treatment may be further valorized in the biofuel manufacture. It is anticipated that the high microalgal lipid potential will force research towards finding effective ways to manipulate biochemical pathways involved in lipid biosynthesis and towards cost effective algal cultivation and harvesting systems, as well. Copyright © 2014 Elsevier Inc. All rights reserved.

Effect of the Drying Process on the Intensification of Phenolic Compounds Recovery from Grape Pomace Using Accelerated Solvent Extraction

PubMed Central

Rajha, Hiba N.; Ziegler, Walter; Louka, Nicolas; Hobaika, Zeina; Vorobiev, Eugene; Boechzelt, Herbert G.; Maroun, Richard G.

2014-01-01

In light of their environmental and economic interests, food byproducts have been increasingly exploited and valorized for their richness in dietary fibers and antioxidants. Phenolic compounds are antioxidant bioactive molecules highly present in grape byproducts. Herein, the accelerated solvent extraction (ASE) of phenolic compounds from wet and dried grape pomace, at 45 °C, was conducted and the highest phenolic compounds yield (PCY) for wet (16.2 g GAE/100 g DM) and dry (7.28 g GAE/100 g DM) grape pomace extracts were obtained with 70% ethanol/water solvent at 140 °C. The PCY obtained from wet pomace was up to two times better compared to the dry byproduct and up to 15 times better compared to the same food matrices treated with conventional methods. With regard to Resveratrol, the corresponding dry pomace extract had a better free radical scavenging activity (49.12%) than the wet extract (39.8%). The drying pretreatment process seems to ameliorate the antiradical activity, especially when the extraction by ASE is performed at temperatures above 100 °C. HPLC-DAD analysis showed that the diversity of the flavonoid and the non-flavonoid compounds found in the extracts was seriously affected by the extraction temperature and the pretreatment of the raw material. This diversity seems to play a key role in the scavenging activity demonstrated by the extracts. Our results emphasize on ASE usage as a promising method for the preparation of highly concentrated and bioactive phenolic extracts that could be used in several industrial applications. PMID:25322155

Novel self-assembled mesalamine-sucralfate complexes: preparation, characterization, and formulation aspects.

PubMed

Ispas-Szabo, Pompilia; Friciu, Mihaela Maria; Nguyen, Phuong; Dumoulin, Yves; Mateescu, Mircea Alexandru

2016-01-01

Two well-known active agents, mesalamine (MES) and sucralfate (SUC), were investigated for possible utilization as fixed-dose combination product. The anti-inflammatory action of MES in association with bioadhesiveness and mucosal healing properties of SUC were considered promising for the development of a new compound containing both molecules, aimed as an improved treatment of ulcerative colitis. The present study investigates the capacity of the two active agents to interact and generate a new and stable entity via self-assembling. Spray-drying was used to co-process the two active principles from an aqueous mixture where the ratio MES:SUC was in the range 25:75, 50:50, and 75:25. The structural data (X-Ray, FTIR, SEM, DSC, and (1)H NMR) have shown that MES and SUC are interacting leading to complexes with properties differing from those of each separate active agent and from their physical blends. (1)H NMR results indicated that complexation occurred when the aqueous suspensions of drugs were mixed, prior to spray-drying. Drug-drug self-assembling was the driving mechanism in the formation of the new entity. Based on the structural data, a hypothetical structure of the complex was proposed. Co-processing of MES and SUC represents a simple and useful procedure to prepare new self-assembled compounds by valorizing the ionic interactions between the two entities. Preliminary studies with oral solid dosage forms based on MES-SUC complexes tested in vitro have shown a controlled MES release, opening the perspective of a new colon-targeted delivery system and a novel class of compounds with therapeutic application in inflammatory bowel diseases.

Effect of the drying process on the intensification of phenolic compounds recovery from grape pomace using accelerated solvent extraction.

PubMed

Rajha, Hiba N; Ziegler, Walter; Louka, Nicolas; Hobaika, Zeina; Vorobiev, Eugene; Boechzelt, Herbert G; Maroun, Richard G

2014-10-15

In light of their environmental and economic interests, food byproducts have been increasingly exploited and valorized for their richness in dietary fibers and antioxidants. Phenolic compounds are antioxidant bioactive molecules highly present in grape byproducts. Herein, the accelerated solvent extraction (ASE) of phenolic compounds from wet and dried grape pomace, at 45 °C, was conducted and the highest phenolic compounds yield (PCY) for wet (16.2 g GAE/100 g DM) and dry (7.28 g GAE/100 g DM) grape pomace extracts were obtained with 70% ethanol/water solvent at 140 °C. The PCY obtained from wet pomace was up to two times better compared to the dry byproduct and up to 15 times better compared to the same food matrices treated with conventional methods. With regard to Resveratrol, the corresponding dry pomace extract had a better free radical scavenging activity (49.12%) than the wet extract (39.8%). The drying pretreatment process seems to ameliorate the antiradical activity, especially when the extraction by ASE is performed at temperatures above 100 °C. HPLC-DAD analysis showed that the diversity of the flavonoid and the non-flavonoid compounds found in the extracts was seriously affected by the extraction temperature and the pretreatment of the raw material. This diversity seems to play a key role in the scavenging activity demonstrated by the extracts. Our results emphasize on ASE usage as a promising method for the preparation of highly concentrated and bioactive phenolic extracts that could be used in several industrial applications.

Biorefinery process for production of paper and oligomers from Leucaena leucocephala K360 with or without prior autohydrolysis.

PubMed

Feria, M J; García, J C; Díaz, M J; Fernández, M; López, F

2012-12-01

Lignocellulosic material from Leucaena leucocephala was subjected to a two-stage fractionation process to obtain a valorized effluent containing hemicellulose derivatives and a solid phase for producing cellulose pulp by conventional soda-anthraquinone delignification. This solid phase allows the production of cellulose pulp, under less rigorous conditions from NaOH-AQ process (177 °C, 21%, 120 min) than without pretreatment delignification (185 °C, 25%, 150 min) and better or similar properties in the paper sheets obtained (yield 27.6 and 34.0%, brightness 39.3 and 31.6% ISO, tensile index 7.8 and 10.5 N m/g, burst index 0.43 and 0.29 MPa m(2)/kg with and without previous autohydrolysis) have be found. Also, the first autohydrolysis stage allows up to 46.6% of the initial hemicellulose in the raw material to be extracted as xylooligomers, xylose and furfural into the liquid phase. Copyright © 2012 Elsevier Ltd. All rights reserved.

Waste valorization by biotechnological conversion into added value products.

PubMed

Liguori, Rossana; Amore, Antonella; Faraco, Vincenza

2013-07-01

Fossil fuel reserves depletion, global warming, unrelenting population growth, and costly and problematic waste recycling call for renewable resources of energy and consumer products. As an alternative to the 100 % oil economy, production processes based on biomass can be developed. Huge amounts of lignocellulosic wastes are yearly produced all around the world. They include agricultural residues, food farming wastes, "green-grocer's wastes," tree pruning residues, and organic and paper fraction of urban solid wastes. The common ways currently adopted for disposal of these wastes present environmental and economic disadvantages. As an alternative, processes for adding value to wastes producing high added products should be developed, that is the upgrading concept: adding value to wastes by production of a product with desired reproducible properties, having economic and ecological advantages. A wide range of high added value products, such as enzymes, biofuels, organic acids, biopolymers, bioelectricity, and molecules for food and pharmaceutical industries, can be obtained by upgrading solid wastes. The most recent advancements of their production by biotechnological processes are overviewed in this manuscript.

Valorization of sugar-to-ethanol process waste vinasse: A novel biorefinery approach using edible ascomycetes filamentous fungi.

PubMed

Nair, Ramkumar B; Taherzadeh, Mohammad J

2016-12-01

The aim of the present work was to study the integration of edible ascomycetes filamentous fungi into the existing sugar- or molasses-to-ethanol processes, to grow on vinasse or stillage and produce ethanol and protein-rich fungal biomass. Two fungal strains, Neurospora intermedia and Aspergillus oryzae were examined in shake flasks and airlift-bioreactors, resulting in reduction of vinasse COD by 34% and viscosity by 21%. Utilization of glycerol and sugars were observed, yielding 202.4 or 222.8g dry fungal biomass of N. intermedia or A. oryzae respectively, per liter of vinasse. Integration of the current process at an existing ethanol facility producing about 100,000m 3 of ethanol per year could produce around 200,000-250,000tons of dry fungal biomass (40-45% protein) together with about 8800-12,600m 3 extra ethanol (8.8-12.6% of production-rate improvement). Copyright © 2016 Elsevier Ltd. All rights reserved.

Biotechnological Production of Docosahexaenoic Acid Using Aurantiochytrium limacinum: Carbon Sources Comparison And Growth Characterization.

PubMed

Abad, Sergi; Turon, Xavier

2015-12-05

Aurantiochytrium limacinum, a marine heterotrophic protist/microalga has shown interesting yields of docosahexaenoic acid (DHA) when cultured with different carbon sources: glucose, pure and crude glycerol. A complete study in a lab-scale fermenter allowed for the characterization and comparison of the growth kinetic parameters corresponding to each carbon source. Artificial Marine Medium (AMM) with glucose, pure and crude glycerol offered similar biomass yields. The net growth rates (0.10-0.12 h(-1)), biomass (0.7-0.8 g cells/g Substrate) and product (0.14-0.15 g DHA/g cells) yields, as well as DHA productivity were similar using the three carbon sources. Viable potential applications to valorize crude glycerol are envisioned to avoid an environmental problem due to the excess of byproduct.

Kinetic study of dry anaerobic co-digestion of food waste and cardboard for methane production.

PubMed

Capson-Tojo, Gabriel; Rouez, Maxime; Crest, Marion; Trably, Eric; Steyer, Jean-Philippe; Bernet, Nicolas; Delgenès, Jean-Philippe; Escudié, Renaud

2017-11-01

Dry anaerobic digestion is a promising option for food waste treatment and valorization. However, accumulation of ammonia and volatile fatty acids often occurs, leading to inefficient processes and digestion failure. Co-digestion with cardboard may be a solution to overcome this problem. The effect of the initial substrate to inoculum ratio (0.25 to 1gVS·gVS -1 ) and the initial total solids contents (20-30%) on the kinetics and performance of dry food waste mono-digestion and co-digestion with cardboard was investigated in batch tests. All the conditions produced methane efficiently (71-93% of the biochemical methane potential). However, due to lack of methanogenic activity, volatile fatty acids accumulated at the beginning of the digestion and lag phases in the methane production were observed. At increasing substrate to inoculum ratios, the initial acid accumulation was more pronounced and lower cumulative methane yields were obtained. Higher amounts of soluble organic matter remained undegraded at higher substrate loads. Although causing slightly longer lag phases, high initial total solids contents did not jeopardize the methane yields. Cardboard addition reduced acid accumulation and the decline in the yields at increasing substrate loads. However, cardboard addition also caused higher concentrations of propionic acid, which appeared as the most last acid to be degraded. Nevertheless, dry co-digestion of food waste and cardboard in urban areas is demonstrated asan interesting feasible valorization option. Copyright © 2017 Elsevier Ltd. All rights reserved.

Thermal valorization of post-consumer film waste in a bubbling bed gasifier

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martínez-Lera, S., E-mail: susanamartinezlera@gmail.com; Torrico, J.; Pallarés, J.

2013-07-15

Highlights: • Film waste from packaging is a common waste, a fraction of which is not recyclable. • Gasification can make use of the high energy value of the non-recyclable fraction. • This waste and two reference polymers were gasified in a bubbling bed reactor. • This experimental research proves technical feasibility of the process. • It also analyzes impact of composition and ER on the performance of the plant. - Abstract: The use of plastic bags and film packaging is very frequent in manifold sectors and film waste is usually present in different sources of municipal and industrial wastes.more » A significant part of it is not suitable for mechanical recycling but could be safely transformed into a valuable gas by means of thermal valorization. In this research, the gasification of film wastes has been experimentally investigated through experiments in a fluidized bed reactor of two reference polymers, polyethylene and polypropylene, and actual post-consumer film waste. After a complete experimental characterization of the three materials, several gasification experiments have been performed to analyze the influence of the fuel and of equivalence ratio on gas production and composition, on tar generation and on efficiency. The experiments prove that film waste and analogue polymer derived wastes can be successfully gasified in a fluidized bed reactor, yielding a gas with a higher heating value in a range from 3.6 to 5.6 MJ/m{sup 3} and cold gas efficiencies up to 60%.« less

a Generic Augmented Reality Telescope for Heritage Valorization

NASA Astrophysics Data System (ADS)

Chendeb, S.; Ridene, T.; Leroy, L.

2013-08-01

Heritage valorisation is one of the greatest challenges that face countries in preserving their own identity from the globalization process. One of those scientific areas which allow this valorisation to be more attractive and at its bravest is the augmented reality. In this paper, we present an innovative augmented reality telescope used by tourists to explore a panoramic view with optional zooming facility, allowing thereby an accurate access to heritage information. The telescope we produced is generic, ergonomic, extensible, and modular by nature. It is designed to be conveniently set up anywhere in the world. We improve the practical use of our system by testing it right in the heart of Paris within a specific use case.

Simultaneous extraction and depolymerization of fucoidan from Sargassum muticum in aqueous media.

PubMed

Balboa, Elena M; Rivas, Sandra; Moure, Andrés; Domínguez, Herminia; Parajó, Juan Carlos

2013-11-21

The biomass components of the invasive seaweed Sargassum muticum were fractionated to allow their separate valorization. S. muticum (Sm) and the solid residue remaining after alginate extraction of this seaweed (AESm) were processed with hot, compressed water (hydrothermal processing) to assess the effects of temperature on fucoidan solubilization. Fucose-containing oligosaccharides were identified as reaction products. Operating under optimal conditions (170 °C), up to 62 and 85 wt% of the dry mass of Sm and AESm were solubilized, respectively. The reaction media were subjected to precipitation, nanofiltration and freeze-drying. The dried products contained 50% and 85% of the fucoidan present in Sm and AESm, respectively; together with other components such as phenolics and inorganic components. The saccharidic fraction, accounting for up to 35% of the dried extracts, contained fucose as the main sugar, and also galactose, xylose, glucose and mannose. The concentrates were characterized for antioxidant activity using the TEAC assay.

Pellets valorization of waste biomass harvested by coagulation of freshwater algae.

PubMed

Cancela, Ángeles; Sánchez, Ángel; Álvarez, Xana; Jiménez, Alejandro; Ortiz, Luis; Valero, Enrique; Varela, Paloma

2016-03-01

There is a comparison of different coagulants: calcium chloride (20, 60, 120 and 180 mg/L); sodium alginate (10 and 20 mg/L) and tannins of Eucalyptus globulus bark (10 and 20 mg/L) in order to make the most of each method. The results show that 20 mg/L of tannin achieved a recovery efficiency of 95.35±1.16, sodium alginate 90.49±0.53 and 84.04±2.29 for calcium chloride. Taking into account the economic side of the coagulants, obtaining tannins is a profitable process. Bark is waste biomass obtained in the forestry process; therefore it does not involve extra costs. Finally, the feasibility of making pellets from harvested algae was studied, and the results suggest that waste biomass pellets may be used as fuel in boilers in a mixture <54% with other waste sources as Eucalyptus g. branches. Copyright © 2016 Elsevier Ltd. All rights reserved.

Simultaneous Extraction and Depolymerization of Fucoidan from Sargassum muticum in Aqueous Media

PubMed Central

Balboa, Elena M.; Rivas, Sandra; Moure, Andrés; Domínguez, Herminia; Parajó, Juan Carlos

2013-01-01

The biomass components of the invasive seaweed Sargassum muticum were fractionated to allow their separate valorization. S. muticum (Sm) and the solid residue remaining after alginate extraction of this seaweed (AESm) were processed with hot, compressed water (hydrothermal processing) to assess the effects of temperature on fucoidan solubilization. Fucose-containing oligosaccharides were identified as reaction products. Operating under optimal conditions (170 °C), up to 62 and 85 wt% of the dry mass of Sm and AESm were solubilized, respectively. The reaction media were subjected to precipitation, nanofiltration and freeze-drying. The dried products contained 50% and 85% of the fucoidan present in Sm and AESm, respectively; together with other components such as phenolics and inorganic components. The saccharidic fraction, accounting for up to 35% of the dried extracts, contained fucose as the main sugar, and also galactose, xylose, glucose and mannose. The concentrates were characterized for antioxidant activity using the TEAC assay. PMID:24284426

Bioremediation and detoxification of industrial wastes by earthworms: Vermicompost as powerful crop nutrient in sustainable agriculture.

PubMed

Bhat, Sartaj Ahmad; Singh, Sharanpreet; Singh, Jaswinder; Kumar, Sunil; Bhawana; Vig, Adarsh Pal

2018-03-01

Vermicompost is the final product of the vermicomposting process involving the collective action of earthworms and microbes. During this process, the waste is converted into useful manure by reducing the harmful effects of waste. Toxicity of industrial wastes is evaluated by plant bioassays viz. Allium cepa and Vicia faba test. These bioassays are sensitive and cost-effective for the monitoring of environmental contamination. The valorization potential of earthworms and their ability to detoxify heavy metals in industrial wastes is because of their strong metabolic system and involvement of earthworm gut microbes and chloragocyte cells. Most of the studies reported that the vermicompost produced from organic wastes contains higher amounts of humic substances, which plays a major role in growth of plants. The present article discusses the detoxification of industrial wastes by earthworms and the role of final vermicompost in plant growth and development. Copyright © 2018 Elsevier Ltd. All rights reserved.

Flowthrough Reductive Catalytic Fractionation of Biomass

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Eric M.; Stone, Michael L.; Katahira, Rui

2017-11-01

Reductive catalytic fractionation (RCF) has emerged as a leading biomass fractionation and lignin valorization strategy. Here, flowthrough reactors were used to investigate RCF of poplar. Most RCF studies to date have been conducted in batch, but a flow-based process enables the acquisition of intrinsic kinetic and mechanistic data essential to accelerate the design, optimization, and scale-up of RCF processes. Time-resolved product distributions and yields obtained from experiments with different catalyst loadings were used to identify and deconvolute events during solvolysis and hydrogenolysis. Multi-bed RCF experiments provided unique insights into catalyst deactivation, showing that leaching, sintering, and surface poisoning are causesmore » for decreased catalyst performance. The onset of catalyst deactivation resulted in higher concentrations of unsaturated lignin intermediates and increased occurrence of repolymerization reactions, producing high-molecular-weight species. Overall, this study demonstrates the concept of flowthrough RCF, which will be vital for realistic scale-up of this promising approach.« less

Chemical and Physical Characteristics of Soy Proteins for New Industrial Applications

NASA Astrophysics Data System (ADS)

Arboleda Fernandez, Julio Cesar

Despite of being environmentally friendly, biocompatible, rich in chemical functionality and abundant as residual materials, soy proteins (SPs) are used for low added value applications. In this work, SPs were studied and used as potentially useful biomacromolecules for different industrial applications with high added value. Initially the effect of acid hydrolysis of soy proteins as a potential route for subsequent surface modification was studied, finding that SP hydrolysates tend to form less aggregates and to adsorb at faster rates compared with unmodified SP; nevertheless, it was also found that the amount of protein adsorbed and water contact angle of the treated surface does not change significantly. Secondly, the gel forming properties of SPs were used to produce aerogels with densities in the order of 0.1 g/cm3. To improve their mechanical properties, the reinforcement of these materials with cellulose nanofibers was studied, obtaining composite aerogels with SP loadings as high as ca. 70% that display a compression modulus of 4.4 MPa, very close to the value obtained from the pure nanofibers aerogels. The composite materials gain moisture (up to 5%) in equilibrium with 50% RH air. Futhermore, their physical integrity is unchanged upon immersion in polar and non-polar solvents, exhibiting sorption rates dependent on the aerogel composition, morphology and swelling abilities. Finally, different soy protein based products and derivatives were used to enhance the dry strength properties of wood fibers in paper production. Experiments using soy flour, soy protein isolate, soy protein isolate hydrolysates, cationized soy flour, and soy flour combined with cationic starch and chitosan were done, obtaining satisfactory results when soy protein flour was utilized in combination with conventional treatments involving cationic polymers. The current results confirm the opportunity to valorize residual soy products that are underutilized today as alternatives to oil derived chemicals used in chemical processes.

Microwave assisted step-by-step process for the production of fucoidan, alginate sodium, sugars and biochar from Ascophyllum nodosum through a biorefinery concept.

PubMed

Yuan, Yuan; Macquarrie, Duncan J

2015-12-01

The biorefinery is an important concept for the development of alternative routes to a range of interesting and important materials from renewable resources. It ensures that the resources are used fully and that all parts of them are valorized. This paper develops this concept, using brown macroalgae Ascophyllum nodosum as an example, by assistance of microwave technology. A step-by-step process was designed to obtain fucoidan, alginates, sugars and biochar (alga residue) consecutively. The yields of fucoidan, alginates, sugars and biochar were 14.09%, 18.24%, 10.87% and 21.44%, respectively. To make an evaluation of the biorefinery process, seaweed sample was also treated for fucoidan extraction only, alginate extraction only and hydrothermal treatment for sugars and biochar only. The chemical composition and properties of each product were also analyzed. The results indicated that A. nodosum could be potentially used as feedstock for a biorefinery process to produce valuable chemicals and fuels. Copyright © 2015 Elsevier Ltd. All rights reserved.

Decoding how a soil bacterium extracts building blocks and metabolic energy from ligninolysis provides road map for lignin valorization (Towards Lignin valorization: How a soil bacterium extracts building blocks and metabolic energy from "Lignolysis")

DOE Office of Scientific and Technical Information (OSTI.GOV)

Varman, Arul M.; He, Lian; Follenfant, Rhiannon

Lignin is a major resources for the production of next generation renewable aromatics. Sphingobium sp. SYK-6 is a bacterium that has been well-studied for the breakdown of lignin-derived compounds. There has been a lot of interest in SYK-6 lignolytic activity and many recent works have focused on understanding the unique catabolic pathway it possesses for the degradation of lignin derived monomers and oligomers. Furthermore, there has been no prior effort in understanding the central fluxome based on lignin derived substrates into value-added chemicals.

Decoding how a soil bacterium extracts building blocks and metabolic energy from ligninolysis provides road map for lignin valorization (Towards Lignin valorization: How a soil bacterium extracts building blocks and metabolic energy from "Lignolysis")

DOE PAGES

Varman, Arul M.; He, Lian; Follenfant, Rhiannon; ...

2016-09-15

Lignin is a major resources for the production of next generation renewable aromatics. Sphingobium sp. SYK-6 is a bacterium that has been well-studied for the breakdown of lignin-derived compounds. There has been a lot of interest in SYK-6 lignolytic activity and many recent works have focused on understanding the unique catabolic pathway it possesses for the degradation of lignin derived monomers and oligomers. Furthermore, there has been no prior effort in understanding the central fluxome based on lignin derived substrates into value-added chemicals.

Shell Biorefinery: Dream or Reality?

PubMed

Chen, Xi; Yang, Huiying; Yan, Ning

2016-09-12

Shell biorefinery, referring to the fractionation of crustacean shells into their major components and the transformation of each component into value-added chemicals and materials, has attracted growing attention in recent years. Since the large quantities of waste shells remain underexploited, their valorization can potentially bring both ecological and economic benefits. This Review provides an overview of the current status of shell biorefinery. It first describes the structural features of crustacean shells, including their composition and their interactions. Then, various fractionation methods for the shells are introduced. The last section is dedicated to the valorization of chitin and its derivatives for chemicals, porous carbon materials and functional polymers. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A perspective on renewable bioenergy from photosynthetic algae as feedstock for biofuels and bioproducts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Laurens, Lieve M. L.; Chen-Glasser, Melodie; McMillan, James D.

There has been substantial technical progress in developing algae-based bioenergy in recent years and a large part of industry and academic research and deployment projects have pivoted away from a pure biofuels strategy. This letter summarizes the findings of a recently completed, comprehensive report, that represents a collaborative effort of at least 20 co-authors, where we analyzed the prospects for using microalgae and macroalgae as feedstocks for biofuels and bioenergy production. The scope of this report includes a discussion of international activities advancing bioenergy and non-energy bioproducts from algae, progress on the use of macroalgae (both cast and cultivated seaweeds)more » for biogas applications, distinct biochemical and thermochemical conversion pathways, multi-product biorefining opportunities, as well as a thorough review of process economics and sustainability considerations. It is envisioned that a higher value algal biomass-based bioproducts industry will provide the additional revenue needed to reduce the net cost of producing algae-based biofuels. As such, a biorefinery approach that generates multiple high-value products from algae will be essential to fully valorize algal biomass and enable economically viable coproduction of bioenergy. Furthermore, to accelerate the implementation of algae-based production, minimizing energy, water, nutrients and land use footprints of integrated algae-based operations needs to be a primary objective of larger scale demonstrations and future research and development.« less

A p-coumaroyl esterase from Rhizoctonia solani with a pronounced chlorogenic acid esterase activity.

PubMed

Nieter, Annabel; Kelle, Sebastian; Linke, Diana; Berger, Ralf G

2017-07-25

Extracellular esterase activity was detected in submerged cultures of Rhizoctonia solani grown in the presence of sugar beet pectin or Tween 80. Putative type B feruloyl esterase (FAE) coding sequences found in the genome data of the basidiomycete were heterologously expressed in Pichia pastoris. Recombinant enzyme production on the 5-L bioreactor scale (Rs pCAE: 3245UL -1 ) exceeded the productivity of the wild type strain by a factor of 800. Based on substrate specificity profiling, the purified recombinant Rs pCAE was classified as a p-coumaroyl esterase (pCAE) with a pronounced chlorogenic acid esterase side activity. The Rs pCAE was also active on methyl cinnamate, caffeate and ferulate and on feruloylated saccharides. The unprecedented substrate profile of Rs pCAE together with the lack of sequence similarity to known FAEs or pCAEs suggested that the Rs pCAE represents a new type of enzyme. Hydroxycinnamic acids were released from agro-industrial side-streams, such as destarched wheat bran (DSWB), sugar beet pectin (SBP) and coffee pulp (CP). Overnight incubation of coffee pulp with the Rs pCAE resulted in the efficient release of p-coumaric (100%), caffeic (100%) and ferulic acid (85%) indicating possible applications for the valorization of food processing wastes and for the enhanced degradation of lignified biomass. Copyright © 2017 Elsevier B.V. All rights reserved.

Investigating the degradation process of kraft lignin by β-proteobacterium, Pandoraea sp. ISTKB.

PubMed

Kumar, Madan; Singh, Jyoti; Singh, Manoj Kumar; Singhal, Anjali; Thakur, Indu Shekhar

2015-10-01

The present study investigates the kraft lignin (KL) degrading potential of novel alkalotolerant Pandoraea sp. ISTKB utilizing KL as sole carbon source. The results displayed 50.2 % reduction in chemical oxygen demand (COD) and 41.1 % decolorization after bacterial treatment. The maximum lignin peroxidase (LiP) and manganese peroxidase (MnP) activity detected was 2.73 and 4.33 U ml(-1), respectively, on day 3. The maximum extracellular and intracellular laccase activities observed were 1.32 U ml(-1) on day 5 and 4.53 U ml(-1) on day 4, respectively. The decolorization and degradation was maximum on day 2. Further, it registered an increase with the production of extracellular laccase. This unusual trend of decolorization and degradation was studied using various aromatic compounds and dyes. SEM and FTIR results indicated significant change in surface morphology and functional group composition during the course of degradation. Gas chromatography and mass spectroscopy (GC-MS) analysis confirmed KL degradation by emergence of new peaks and the identification of low molecular weight aromatic intermediates in treated sample. The degradation of KL progressed through the generation of phenolic intermediates. The identified intermediates implied the degradation of hydroxyphenyl, ferulic acid, guaiacyl, syringyl, phenylcoumarane, and pinoresinol components commonly found in lignin. The degradation, decolorization, and GC-MS analysis indicated potential application of the isolate Pandoraea sp. ISTKB in treatment of lignin-containing pollutants and KL valorization.

A perspective on renewable bioenergy from photosynthetic algae as feedstock for biofuels and bioproducts

DOE PAGES

Laurens, Lieve M. L.; Chen-Glasser, Melodie; McMillan, James D.

2017-04-15

There has been substantial technical progress in developing algae-based bioenergy in recent years and a large part of industry and academic research and deployment projects have pivoted away from a pure biofuels strategy. This letter summarizes the findings of a recently completed, comprehensive report, that represents a collaborative effort of at least 20 co-authors, where we analyzed the prospects for using microalgae and macroalgae as feedstocks for biofuels and bioenergy production. The scope of this report includes a discussion of international activities advancing bioenergy and non-energy bioproducts from algae, progress on the use of macroalgae (both cast and cultivated seaweeds)more » for biogas applications, distinct biochemical and thermochemical conversion pathways, multi-product biorefining opportunities, as well as a thorough review of process economics and sustainability considerations. It is envisioned that a higher value algal biomass-based bioproducts industry will provide the additional revenue needed to reduce the net cost of producing algae-based biofuels. As such, a biorefinery approach that generates multiple high-value products from algae will be essential to fully valorize algal biomass and enable economically viable coproduction of bioenergy. Furthermore, to accelerate the implementation of algae-based production, minimizing energy, water, nutrients and land use footprints of integrated algae-based operations needs to be a primary objective of larger scale demonstrations and future research and development.« less

Anaerobic digestion of selected Italian agricultural and industrial residues (grape seeds and leather dust): combined methane production and digestate characterization.

PubMed

Caramiello, C; Lancellotti, I; Righi, F; Tatàno, F; Taurino, R; Barbieri, L

2013-01-01

A combined experimental evaluation of methane production (obtained by anaerobic digestion) and detailed digestate characterization (with physical-chemical, thermo-gravimetric and mineralogical approaches) was conducted on two organic substrates, which are specific to Italy (at regional and national levels). One of the substrates was grape seeds, which have an agricultural origin, whereas the other substrate was vegetable-tanned leather dust, which has an industrial origin. Under the assumed experimental conditions of the performed lab-scale test series, the grape seed substrate exhibited a resulting net methane production of 175.0 NmL g volatile solids (VS)(-1); hence, it can be considered as a potential energy source via anaerobic digestion. Conversely, the net methane production obtained from the anaerobic digestion of the vegetable-tanned leather dust substrate was limited to 16.1 NmL gVS(-1). A detailed characterization of the obtained digestates showed that there were both nitrogen-containing compounds and complex organic compounds present in the digestate that was obtained from the mixture of leather dust and inoculum. As a general perspective of this experimental study, the application of diversified characterization analyzes could facilitate (1) a better understanding of the main properties of the obtained digestates to evaluate their potential valorization, and (2) a combination of the digestate characteristics with the corresponding methane productions to comprehensively evaluate the bioconversion process.

Survey of Lignin-Structure Changes and Depolymerization during Ionic Liquid Pretreatment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dutta, Tanmoy; Isern, Nancy G.; Sun, Jian

A detailed study of chemical changes in lignin structure during the ionic liquid (IL) pretreatment process is not only pivotal for understanding and overcoming biomass recalcitrance during IL pretreatment, but also is necessary for designing new routes for lignin valorization. Chemical changes in lignin were systematically studied as a function of pretreatment temperature, time and type of IL used. Kraft lignin was used as the lignin source and common pretreatment conditions were employed using three different ILs of varying chemical structure in terms of acidic or basic character. The chemical changes in the lignin structure due to IL pretreatment processesmore » were monitored using 1H-13C HSQC NMR, 31P NMR, elemental analysis, GPC, FT-IR, and the depolymerized products were analyzed using GC-MS. Although pretreatment in acidic IL, triethylammonium hydrogensulfate ([TEA][HSO4]) results in maximum decrease in β-aryl ether bond, maximum dehydration and recondensation pathways were also evident, with the net process showing a minimum decrease in the molecular weight of regenerated lignin. However, 1-ethyl-3-methylimidazolium acetate ([C2C1Im][OAc]) pretreatment yields a smaller decrease in the β-aryl ether content along with minimum evidence of recondensation, resulting in the maximum decrease in the molecular weight. Cholinium lysinate ([Ch][Lys]) pretreatment shows an intermediate result, with moderate depolymerization, dehydration and recondensation observed. The depolymerization products after IL pretreatment are found to be a function of the pretreatment temperature and the specific chemical nature of the IL used. At higher pretreatment temperature, [Ch][Lys] pretreatment yields guaiacol, [TEA][HSO4] yields guaiacylacetone, and [C2C1Im][OAc] yields both guaiacol and guaiacylacetone as major products. These results clearly indicate that the changes in lignin structure as well as the depolymerized product profile depend on the pretreatment conditions and the nature of the ILs. The insight gained on lignin structure changes and possible depolymerized products during IL pretreatment process would help future lignin valorization efforts in a potential IL-based lignocellulosic biorefinery.« less

VALOR joint oscillation analysis using multiple LAr-TPCs in the Booster Neutrino Beam at Fermilab

NASA Astrophysics Data System (ADS)

Andreopoulos, C.; Barry, C.; Bench, F.; Chappell, A.; Dealtry, T.; Dennis, S.; Escudero, L.; Jones, R.; Grant, N.; Roda, M.; Sgalaberna, D.; Shah, R.

2017-09-01

Anomalies observed by different experiments, the most significant ones being the ∼3.8 sigma νe appearance in a ∼50 MeV νµ beam from muon decay at rest observed by the LSND experiment and the ∼3.8 sigma νe and {\\bar{ν }}e appearance in a ∼1 GeV neutrino beam from pion decay in flight observed by MiniBooNE, suggest the existence of sterile neutrinos. The Short Baseline Neutrino (SBN) program at Fermilab aims to perform a sensitive search for sterile neutrinos by performing analyses of νe appearance and νµ disappearance employing three Liquid Argon Time Projection Chambers (LAr-TPCs) at different baselines. The VALOR neutrino fitting group was established within the T2K experiment and has led numerous flagship T2K oscillation analyses, and provided sensitivity and detector optimisation studies for DUNE and Hyper-K. The neutrino oscillation framework developed by this group is able to perform fits of several samples and systematic parameters within different neutrino models and experiments. Thus, VALOR is an ideal environment for the neutrino oscillation fits using multiple LAr-TPC detectors with proper treatment of correlated systematic uncertainties necessary for the SBN analyses.

[Not Available].

PubMed

Pacheco-Herrera, Javier Darío; Ramírez-Vélez, Robinson; Correa-Bautista, Jorge Enrique

2016-06-30

Objetivo: el presente estudio tuvo por objetivos: a) determinar los valores de referencia de la condición muscular mediante el índice general de fuerza (IGF); y b) estudiar si el IGF está asociado con indicadores de adiposidad en niños y adolescentes escolares de Bogotá, Colombia.Métodos: del total de 7.268 niños y adolescentes (9-17,9 años) evaluados en el estudio FUPRECOL, 4.139 (57%) fueron mujeres. Se evaluó el IGF como marcador del desempeño muscular a partir de la tipificación de las pruebas de fuerza prensil (FP) y salto de longitud (SL). El IGF se recodificó en cuartiles (Q), siendo el Q4 la posición con mejor valor del IGF. El índice de masa corporal (IMC), la circunferencia de cintura (CC), el índice cintura/talla (ICT) y el porcentaje de grasa corporal (% GC) por bioimpedancia eléctrica se midieron como marcadores de adiposidad.Resultados: la edad media de los evaluados fue 12,8 ± 2,3 años. Se aprecia una tendencia hacia un incremento del nivel de condición física muscular en los varones conforme aumenta la edad, y hacia la estabilidad o un ligero aumento en el caso de las mujeres. El IGF se relacionóinversamente con el ICT y % GC en los varones (r = -0,280, r = -0,327, p < 0,01), respectivamente. Los escolares ubicados en el Q4 del IGF presentaron menores valores en marcadores de adiposidad IMC, CC, ICT y % GC, p < 0,01, que su contraparte del Q1.Conclusión: se presentan valores de referencia del IGF a partir de la estandarización de los resultados obtenidos en la FP y SL. La evaluación de la fuerza muscular en edades tempranas permitirá implementar programas de prevención de riesgo cardiovascular y metabólico futuro.

Parametric and kinetic study of adsorptive removal of dyes from aqueous solutions using an agriculture waste

NASA Astrophysics Data System (ADS)

Bencheikh, imane; el hajjaji, souad; abourouh, imane; Kitane, Said; Dahchour, Abdelmalek; El M'Rabet, Mohammadine

2017-04-01

Wastewater treatment is the subject of several studies through decades. Interest is continuously oriented to provide cheaper and efficient methods of treatment. Several methods of treatment exit including coagulation flocculation, filtration, precipitation, ozonation, ion exchange, reverse osmosis, advanced oxidation process. The use of these methods proved limited because of their high investment and operational cost. Adsorption can be an efficient low-cost process to remove pollutants from wastewater. This method of treatment calls for an solid adsorbent which constitutes the purification tool. Agricultural wastes have been widely exploited in this case .As we know the agricultural wastes are an important source of water pollution once discharged into the aquatic environment (river, sea ...). The valorization of such wastes and their use allows the prevention of this problem with an economic and environment benefits. In this context our study aimed testing the wastewater treatment capacity by adsorption onto holocellulose resulting from the valorization of an agriculture waste. In this study, methylene blue (MB) and methyl orange (MO) are selected as models pollutants for evaluating the holocellulose adsorbent capacity. The kinetics of adsorption is performed using UV-visible spectroscopy. In order to study the effect of the main parameters for the adsorption process and their mutual interaction, a full factorial design (type nk) has been used.23 full factorial design analysis was performed to screen the parameters affecting dye removal efficiency. Using the experimental results, a linear mathematical model representing the influence of the different parameters and their interactions was obtained. The parametric study showed that efficiency of the adsorption system (Dyes/ Holocellulose) is mainly linked to pH variation. The best yields were observed for MB at pH=10 and for MO at pH=2.The kinetic data was analyzed using different models , namely , the pseudo-first- order kinetic model the pseudo-second-order kinetic model , and the Intraparticule diffusion model . It was observed that the pseudo -second -order model was the best model describing the adsorption behavior of MB and MO onto holocellulose. This suggested that the adsorption mechanism might be a chemisorptions process. In general, the results indicated that holocellulose is suitable as sorbent material for adsorption of MO and MB from aqueous solutions for its high effectiveness and low cost.

Valorization of peanut shells: Manufacture of bioactive oligosaccharides.

PubMed

Rico, Xiana; Gullón, Beatriz; Alonso, José Luis; Parajó, Juan Carlos; Yáñez, Remedios

2018-03-01

Peanut shells were subjected to non-isothermal aqueous treatments to cause the partial breakdown of hemicelluloses into soluble oligosaccharides and lignin-derived compounds with high antioxidant activity. The effects of temperature on the chemical composition of the substrate and soluble reaction products were assessed. Under selected conditions (210°C, severity=4.09), the overall amount of poly- and oligo- saccharides present in the liquid phase reached 9.8g/L. This solution was refined by consecutive stages of discontinuous diafiltration, yielding a refined product containing about 72.4wt% of oligomers at a global yield of 8.5kg/100kg oven-dry PS. The purified products were characterized by HPLC, MALDI-TOF-MS and FTIR, confirming the major reaction products were saccharides made up of xylose with degrees of polymerization up to 17, substituted with acetyl and methylglucuronosyl groups, for which a number of pharmaceutical and food applications have been proposed. Solubilization of hemicelluloses in the treatments resulted in the production of solids enriched in cellulose and lignin suitable for further applications. Copyright © 2017 Elsevier Ltd. All rights reserved.

Evaluation of benefits and risks associated with the agricultural use of organic wastes of pharmaceutical origin.

PubMed

Cucina, Mirko; Tacconi, Chiara; Ricci, Anna; Pezzolla, Daniela; Sordi, Simone; Zadra, Claudia; Gigliotti, Giovanni

2018-02-01

Industrial fermentations for the production of pharmaceuticals generate large volumes of wastewater that can be biologically treated to recover plant nutrients through the application of pharmaceutical-derived wastes to the soil. Nevertheless, benefits and risks associated with their recovery are still unexplored. Thus, the aim of the present work was to characterize three potential organic residues (sludge, anaerobic digestate and compost) derived from the wastewater generated by the daptomycin production process. The main parameters evaluated were the physico-chemical properties, potential contaminants (heavy metals, pathogens and daptomycin residues), organic matter stabilization and the potential toxicity towards soil microorganisms and plants. The results showed that all the studied materials were characterized by high concentrations of plant macronutrients (N, P and K), making them suitable for agricultural reuse. Heavy metal contents and pathogens were under the limits established by European and Italian legislations, avoiding the risk of soil contamination. The compost showed the highest organic matter stabilization within the studied materials, whereas the sludge and the anaerobic digestate were characterized by large amounts of labile organic compounds. Although the pharmaceutical-derived fertilizers did not negatively affect the soil microorganisms, as demonstrated by the enzymatic activities, the sludge and the anaerobic digestate caused a moderate and strong phytotoxicity, respectively. The compost showed no toxic effect towards plant development and, moreover, it positively affected the germination and growth in lettuce and barley. The results obtained in the present study demonstrate that the valorization of pharmaceutical-derived materials through composting permits their agricultural reuse and also represents a suitable strategy to move towards a zero-waste production process for daptomycin. Copyright © 2017 Elsevier B.V. All rights reserved.

Pedagogia artistica: la conceptualizacion y la creatividad en estudiantes de ciencias de sexto grado

NASA Astrophysics Data System (ADS)

Ortiz Colon, Edwin A.

Se realizo un estudio fenomenologico sobre la conceptualizacion, la creatividad y el valor del dibujo en propiciar un contexto creativo para el aprendizaje de ciencias de sexto grado. La conceptualizacion se interpreto como un proceso que ocurre en las relaciones que los estudiantes establecen entre los temas de estudio y las ideas principales, las experiencias previas, las creencias personales, el tiempo y el valor de la conservacion ambiental. La esencia de la creatividad se definio en funcion de la imaginacion, las destrezas, la intencion, la libertad de pensamiento y expresion y el contexto. El dibujo propicio un ambiente creativo de aprendizaje en las ciencias al facilitar el uso del pensamiento cientifico profundo, el inquirir artistico y la expresion libre.

[Globalization and environmentalism: polyphonic ethnicities in the Amazon].

PubMed

Garnelo, Luiza; Sampaio, Sully

2005-01-01

The article examines the issue of globalization, along with its contradictions and the ways in which it guides and shapes specific situations within the Amazon's present-day reality, while simultaneously engendering the uniformization of economic production and the valorization of cultural differences. The discussion explores the nuances of implementing a massified, standardized productive base that paradoxically fosters the valorization of cultural differences and favors alliances between, on the one hand, ethno-political leaders from indigenous Amazon groups and, on the other, environmentalists and other transworld actors who wield strong decision-making power. The article analyzes the indigenous movement's network of alliances and highlights the polyphony of the different political agents that come to clash with each other within this post-modern geopolitical setting.

Biotechnological Production of Docosahexaenoic Acid Using Aurantiochytrium limacinum: Carbon Sources Comparison And Growth Characterization

PubMed Central

Abad, Sergi; Turon, Xavier

2015-01-01

Aurantiochytrium limacinum, a marine heterotrophic protist/microalga has shown interesting yields of docosahexaenoic acid (DHA) when cultured with different carbon sources: glucose, pure and crude glycerol. A complete study in a lab-scale fermenter allowed for the characterization and comparison of the growth kinetic parameters corresponding to each carbon source. Artificial Marine Medium (AMM) with glucose, pure and crude glycerol offered similar biomass yields. The net growth rates (0.10–0.12 h−1), biomass (0.7–0.8 g cells/g Substrate) and product (0.14–0.15 g DHA/g cells) yields, as well as DHA productivity were similar using the three carbon sources. Viable potential applications to valorize crude glycerol are envisioned to avoid an environmental problem due to the excess of byproduct. PMID:26690180

Bioconversion of distillers' grains hydrolysates to advanced biofuels by an Escherichia coli co-culture.

PubMed

Liu, Fang; Wu, Weihua; Tran-Gyamfi, Mary B; Jaryenneh, James D; Zhuang, Xun; Davis, Ryan W

2017-11-09

First generation bioethanol production utilizes the starch fraction of maize, which accounts for approximately 60% of the ash-free dry weight of the grain. Scale-up of this technology for fuels applications has resulted in a massive supply of distillers' grains with solubles (DGS) coproduct, which is rich in cellulosic polysaccharides and protein. It was surmised that DGS would be rapidly adopted for animal feed applications, however, this has not been observed based on inconsistency of the product stream and other logistics-related risks, especially toxigenic contaminants. Therefore, efficient valorization of DGS for production of petroleum displacing products will significantly improve the techno-economic feasibility and net energy return of the established starch bioethanol process. In this study, we demonstrate 'one-pot' bioconversion of the protein and carbohydrate fractions of a DGS hydrolysate into C4 and C5 fusel alcohols through development of a microbial consortium incorporating two engineered Escherichia coli biocatalyst strains. The carbohydrate conversion strain E. coli BLF2 was constructed from the wild type E. coli strain B and showed improved capability to produce fusel alcohols from hexose and pentose sugars. Up to 12 g/L fusel alcohols was produced from glucose or xylose synthetic medium by E. coli BLF2. The second strain, E. coli AY3, was dedicated for utilization of proteins in the hydrolysates to produce mixed C4 and C5 alcohols. To maximize conversion yield by the co-culture, the inoculation ratio between the two strains was optimized. The co-culture with an inoculation ratio of 1:1.5 of E. coli BLF2 and AY3 achieved the highest total fusel alcohol titer of up to 10.3 g/L from DGS hydrolysates. The engineered E. coli co-culture system was shown to be similarly applicable for biofuel production from other biomass sources, including algae hydrolysates. Furthermore, the co-culture population dynamics revealed by quantitative PCR analysis indicated that despite the growth rate difference between the two strains, co-culturing didn't compromise the growth of each strain. The q-PCR analysis also demonstrated that fermentation with an appropriate initial inoculation ratio of the two strains was important to achieve a balanced co-culture population which resulted in higher total fuel titer. The efficient conversion of DGS hydrolysates into fusel alcohols will significantly improve the feasibility of the first generation bioethanol process. The integrated carbohydrate and protein conversion platform developed here is applicable for the bioconversion of a variety of biomass feedstocks rich in sugars and proteins.

Assessment of by-products of bioenergy systems (anaerobic digestion and gasification) as potential crop nutrient.

PubMed

Kataki, Sampriti; Hazarika, Samarendra; Baruah, D C

2017-01-01

Alternative fertilizer resources have drawn attention in recent times in order to cope up with ever increasing demand for fertilizer. By-products of bioenergy system are considered favourable as organic fertilizer due to their ability to recycle plant nutrients. Present study evaluates fertilizer suitability of by-products of two bioenergy systems viz. 3 types of anaerobic digestion by-products (digestate) from local surplus biomass such as cowdung, Ipomoea carnea:cowdung (60:40) and ricestraw:green gram stover:cowdung (30:30:40) and one gasification by-product (biochar) from rice husk. Digestates were assessed considering 4 different application options of each viz. whole, solid, liquid and ash from solid digestates. Digestate characteristics (organic matter, macronutrients, micronutrients and heavy metal content) were found to be a function of feedstock and processing (solid liquid separation and ashing). Ipomoea carnea based digestates in all application options showed comparatively higher N, P, K, NH 4 + -N, Ca, Mg, S and micro nutrient content than other digestates. Separation concentrated plant nutrients and organic matter in solid digestates, making these suitable both as organic amendments and fertilizer. Separated liquid digestate shared larger fraction of ammonium nitrogen (61-91% of total content), indicating their suitability as readily available N source. However, fertilizer application of liquid digestate may not match crop requirements due to lower total nutrient concentration. Higher electrical conductivity of the liquid digestates (3.4-9.3mScm -1 ) than solid digestates (1.5-2mScm -1 ) may impart phyto-toxic effect upon fertilization due to salinity. In case of by-products with unstable organic fraction i.e. whole and solid digestates of rice straw:green gram stover:cowdung digestates (Humification index 0.7), further processing (stabilization, composting) may be required to maximize their fertilizer benefit. Heavy metal contents of the by-products were found to be within the permitted range specified for organic fertilizer (vermicompost) in India. However, higher Al content of the digestates in whole, solid and ash phase (0.06-16.97gkg -1 fresh matter) can be a concern in acid soil which may cause Al toxicity. Understanding on agrochemical characteristics of bioenergy by-products with varying feedstock and application option is expected to promote their valorization opportunities considering user specific requirements. In the context of agriculturally dominant but energy deficient rural Indian scenario, integrated production of bioenergy and by-product based fertilizer could be very significant to meet the critical additional requirement of both energy and fertilizer. Copyright © 2016 Elsevier Ltd. All rights reserved.

ENERGIC OD Geopan application using Virtual Hub: multi-temporal knowledge oriented information on built environment and riverbed changes to geologist community

NASA Astrophysics Data System (ADS)

Boldrini, E.; Brumana, R.; Previtali, M., Jr.; Mazzetti, P., Sr.; Cuca, B., Sr.; Barazzetti, L., Sr.; Camagni, R.; Santoro, M.

2016-12-01

The Built Environment (BE) is intended as the sum of natural and human activities in dynamic transformations in the past, in the present and in the future: it calls for more informed decisions to face the challenging threats (climate change, natural hazards, anthropic pressures) by exploiting resilience, sustainable intervention and tackling societal opportunities, as heritage valorization and tourism acknowledgment; thus, it asks for awareness rising among circular reflective society. In the framework of ENERGIC OD project (EU Network for Redistributing Geographic Information - Open Data), this paper describes the implementation of an application (GeoPAN Atl@s app) addressed to improve a circular multi-temporal knowledge oriented generation of information, able to integrate and take in account historic and current maps, as well as products of satellite image processing to understand on course and on coming phenomena and relating them with the ones occurred in the ancient and recent past in a diachronic approach. The app is focused on riverbeds-BE and knowledge generation for the detection of their changes by involving geologist community and providing to other user the retrieved information (architects and urban planner, tourists and citizen). Here is described the implementation of the app interfaced with the ENERGIC OD Virtual Hub component, based on a brokering framework for OD discovery and access, to assure interoperability and integration of different datasets, wide spread cartographic products with huge granularity (national, regional environmental Risk Maps, i.e. PAI, on site local data, i.e. UAV data, or results of Copernicus Programme satellite data processing, i.e. object-based and time series image analysis for riverbed monitoring using Sentinel2): different sources, scales and formats, including historical maps needing metadata generation, and SHP data used by the geologist in their daily activities for hydrogeological analysis, to be both usable as OD by the VH. "The research leading to these results has received funding from the European Union ICT Policy Support Programme (ICT PSP) under the Competitiveness and Innovation Framework Programme (CIP), grant agreement n° 620400."

Project VALOR: design and methods of a longitudinal registry of post-traumatic stress disorder (PTSD) in combat-exposed veterans in the Afghanistan and Iraqi military theaters of operations.

PubMed

Rosen, Raymond C; Marx, Brian P; Maserejian, Nancy N; Holowka, Darren W; Gates, Margaret A; Sleeper, Lynn A; Vasterling, Jennifer J; Kang, Han K; Keane, Terence M

2012-03-01

Few studies have investigated the natural history of post-traumatic stress disorder (PTSD). Project VALOR (Veterans' After-discharge Longitudinal Registry) was designed as a longitudinal patient registry assessing the course of combat-related PTSD among 1600 male and female Veterans who served in Operation Enduring Freedom (OEF) in Afghanistan or Operation Iraqi Freedom (OIF). Aims of the study include investigating patterns and predictors of progression or remission of PTSD and treatment utilization. The study design was based on recommendations from the Agency for Healthcare Quality and Research for longitudinal disease registries and used a pre-specified theoretical model to select the measurement domains for data collection and interpretation of forthcoming results. The registry will include 1200 male and female Veterans with a recent diagnosis of PTSD in the Department of Veteran Affairs (VA) electronic medical record and a comparison group of 400 Veterans without a medical record-based PTSD diagnosis, to also allow for case-control analyses. Data are collected from administrative databases, electronic medical records, a self-administered questionnaire, and a semi-structured diagnostic telephone interview. Project VALOR is a unique and timely registry study that will evaluate the clinical course of PTSD, psychosocial correlates, and health outcomes in a carefully selected cohort of returning OEF/OIF Veterans. Copyright © 2011 John Wiley & Sons, Ltd.

Biodiesel from dewatered wastewater sludge: a two-step process for a more advantageous production.

PubMed

Pastore, Carlo; Lopez, Antonio; Lotito, Vincenzo; Mascolo, Giuseppe

2013-07-01

Alternative approaches for obtaining biodiesel from municipal sludge have been successfully investigated. In order to avoid the expensive conventional preliminary step of sludge drying, dewatered sludge (TSS: 15wt%) was used as starting material. The best performance in terms of yield of fatty acid methyl esters (18wt%) with the lowest energy demand (17MJkgFAME(-1)) was obtained by a new two-step approach based on hexane extraction carried out directly on dewatered acidified (H2SO4) sludge followed by methanolysis of extracted lipids. It was found that sulphuric acid plays a key role in the whole process not only for the transesterification of glycerides but also for the production of new free fatty acids from soaps and their esterification with methanol. In addition to biodiesel production, the investigated process allows valorization of primary sludge as it turns it into a valuable source of chemicals, namely sterols (2.5wt%), aliphatic alcohols (0.8wt%) and waxes (2.3wt%). Copyright © 2013 Elsevier Ltd. All rights reserved.

Kinetics of ultrasound-assisted extraction of antioxidant polyphenols from food by-products: Extraction and energy consumption optimization.

PubMed

Pradal, Delphine; Vauchel, Peggy; Decossin, Stéphane; Dhulster, Pascal; Dimitrov, Krasimir

2016-09-01

Ultrasound-assisted extraction (UAE) of antioxidant polyphenols from chicory grounds was studied in order to propose a suitable valorization of this food industry by-product. The main parameters influencing the extraction process were identified. A new mathematical model for multi-criteria optimization of UAE was proposed. This kinetic model permitted the following and the prediction of the yield of extracted polyphenols, the antioxidant activity of the obtained extracts and the energy consumption during the extraction process in wide ranges of temperature (20-60°C), ethanol content in the solvent (0-60% (vol.) in ethanol-water mixtures) and ultrasound power (0-100W). After experimental validation of the model, several simulations at different technological restrictions were performed to illustrate the potentiality of the model to find the optimal conditions for obtaining a given yield within minimal process duration or with minimal energy consumption. The advantage of ultrasound assistance was clearly demonstrated both for the reduction of extraction duration and for the reduction of energy consumption. Copyright © 2016 Elsevier B.V. All rights reserved.

Bioethanol fermentation as alternative valorization route of agricultural digestate according to a biorefinery approach.

PubMed

Sambusiti, C; Monlau, F; Barakat, A

2016-07-01

This study investigates the feasibility of producing bioethanol from solid digestate after a mechanical fractionation (i.e. centrifugal milling), in order to improve the energy recovery from agricultural wastes and the sustainability of anaerobic digestion plants. A bioethanol yield of 37gkg(-1)TS was evaluated for the solid digestate fraction. Mass and energetic balances were performed and compared between two scenarios: (A) one-stage bioethanol fermentation and (B) two-stage anaerobic digestion-bioethanol fermentation, in order to evaluate the feasibility and the advantages of the two-stage process. Results revealed that, compared to the one-stage process, the dual anaerobic digestion-bioethanol process permitted: (i) to diversify biofuels production; (ii) to provide the thermal energy sufficient for drying digestate (13,351kWhthday(-1)), for the subsequent milling step; (iii) to reduce the electric energy requirement for the milling step (from 23,880 to 3580kWhelday(-1)); (iv) to produce extra electrical energy of 8483kWhelday(-1); (v) to improve the reduction of waste streams generated (from 13% to 54% of organic matter removal). Copyright © 2016. Published by Elsevier Ltd.

Impacts | Bioenergy | NREL

Science.gov Websites

Conversion NREL Overcomes Obstacles in Lignin Valorization Novel Combination of Enzyme Systems Could Lower Cellulosic Ethanol Can Be Cost Competitive Reducing Enzyme Costs Increases the Market Potential of Biofuels

Capnography as a tool to detect metabolic changes in patients cared for in the emergency setting.

PubMed

Cereceda-Sánchez, Francisco José; Molina-Mula, Jesús

2017-05-15

to evaluate the usefulness of capnography for the detection of metabolic changes in spontaneous breathing patients, in the emergency and intensive care settings. in-depth and structured bibliographical search in the databases EBSCOhost, Virtual Health Library, PubMed, Cochrane Library, among others, identifying studies that assessed the relationship between capnography values and the variables involved in blood acid-base balance. 19 studies were found, two were reviews and 17 were observational studies. In nine studies, capnography values were correlated with carbon dioxide (CO2), eight with bicarbonate (HCO3), three with lactate, and four with blood pH. most studies have found a good correlation between capnography values and blood biomarkers, suggesting the usefulness of this parameter to detect patients at risk of severe metabolic change, in a fast, economical and accurate way. avaliar a utilidade da capnografia para a detecção de alterações metabólicas em pacientes com respiração espontânea, no contexto das emergências e dos cuidados intensivos. pesquisa bibliográfica estruturada aprofundada, nas bases de dados EBSCOhost, Biblioteca Virtual em Saúde, PubMed, Cochrane Library, entre outras, identificando estudos que avaliavam a relação entre os valores da capnografia e as variáveis envolvidas no equilíbrio ácido-base sanguíneo. foram levantados 19 estudos, dois eram revisões e 17 eram estudos observacionais. Em nove estudos, os valores capnográficos foram correlacionados com o dióxido de carbono (CO2), em oito com o bicarbonato (HCO3), em três com o lactato, e em quatro com o pH sanguíneo. na maioria dos estudos foi observada uma correlação adequada entre os valores capnográficos e os biomarcadores sanguíneos, sugerindo a utilidade deste parâmetro para a identificação de pacientes com risco de sofrer uma alteração metabólica grave, de uma forma rápida, econômica e precisa. explorar la utilidad de la capnografía para la detección de alteraciones metabólicas ante pacientes en respiración espontánea, en el ámbito de las emergencias y los cuidados críticos. búsqueda bibliográfica estructurada en profundidad, en bases de datos EBSCOhost, Biblioteca Virtual de la Salud, PubMed, Cochrane Library, entre otras, identificando estudios que evaluaban la relación entre valores de la capnografía y variables implicadas en el equilibrio ácido-base sanguíneo. se recopilaron 19 estudios, dos eran revisiones y 17 observacionales. En nueve estudios, se correlacionaron los valores capnográficos junto al dióxido de carbono (CO2), en ocho con el bicarbonato (HCO3), tres con el lactato, y cuatro con el pH sanguíneo. la mayoría de estudios han obtenido una correlación adecuada entre los valores capnográficos y biomarcadores sanguíneos, sugiriendo la utilidad de este parámetro para la detección de pacientes en riesgo de padecer una alteración metabólica grave, de forma rápida, económica y precisa.

Diagnosis of compliance of health care product processing in Primary Health Care.

PubMed

Roseira, Camila Eugenia; Silva, Darlyani Mariano da; Passos, Isis Pienta Batista Dias; Orlandi, Fabiana Souza; Padoveze, Maria Clara; Figueiredo, Rosely Moralez de

2016-11-21

identify the compliance of health care product processing in Primary Health Care and assess possible differences in the compliance among the services characterized as Primary Health Care Service and Family Health Service. quantitative, observational, descriptive and inferential study with the application of structure, process and outcome indicators of the health care product processing at ten services in an interior city of the State of São Paulo - Brazil. for all indicators, the compliance indices were inferior to the ideal levels. No statistically significant difference was found in the indicators between the two types of services investigated. The health care product cleaning indicators obtained the lowest compliance index, while the indicator technical-operational resources for the preparation, conditioning, disinfection/sterilization, storage and distribution of health care products obtained the best index. the diagnosis of compliance of health care product processing at the services assessed indicates that the quality of the process is jeopardized, as no results close to ideal levels were obtained at any service. In addition, no statistically significant difference in these indicators was found between the two types of services studied. identificar a conformidade do processamento de produtos para saúde na Atenção Primária à Saúde e avaliar possível diferença na conformidade entre as unidades caracterizadas como Unidade Básica de Saúde e Unidade Saúde da Família. estudo quantitativo, observacional, descritivo e inferencial, com a aplicação de indicadores de estrutura, processo e resultado referentes ao processamento de produtos para a saúde em dez unidades, de um município do interior de São Paulo - Brasil. todos os indicadores obtiveram índice de conformidade inferior ao ideal. Não houve diferença estatisticamente significante nos indicadores entre os dois tipos de unidades investigadas, sendo o indicador de limpeza de produtos para saúde o de menor índice de conformidade, enquanto indicador de recursos técnico-operacionais para preparo, acondicionamento, desinfecção/esterilização, guarda e distribuição de produtos para saúde, o de melhor índice. o diagnóstico de conformidade do processamento de produtos para saúde nas unidades avaliadas indica comprometimento da qualidade do processo, uma vez que não foram obtidos resultados próximos ao valor ideal em nenhuma unidade. Além disso, não houve diferença estatisticamente significante desses indicadores entre os dois tipos de unidades estudadas. identificar la conformidad del procesamiento de productos para la salud en la Atención Primaria a la Salud y evaluar una posible diferencia en la conformidad entre las unidades caracterizadas: Unidad Básica de Salud y Unidad Salud de la Familia. estudio cuantitativo, observacional, descriptivo e inferencial; se aplicaron indicadores de estructura, proceso y resultado, referentes al procesamiento de productos para la salud en diez unidades de un municipio del interior de Sao Paulo, Brasil. todos los indicadores obtuvieron índice de conformidad inferior a lo ideal. No hubo diferencia estadísticamente significativa de los indicadores entre los dos tipos de unidades investigadas, siendo el indicador de limpieza de productos para la salud el de menor índice de conformidad; por otro lado, como indicador de recursos técnico-operacionales para preparación, acondicionamiento, desinfección/esterilización, almacenamiento y distribución de productos para la salud, fue el de mejor índice. el diagnóstico de conformidad del procesamiento de productos para la salud en las unidades evaluadas indica que está comprometida la calidad del proceso, ya que no fueron obtenidos resultados próximos al valor ideal en ninguna unidad. Además de eso, no hubo diferencia estadísticamente significativa de esos indicadores entre los dos tipos de unidades estudiadas.

Solid-state fermentation and composting as alternatives to treat hair waste: A life-cycle assessment comparative approach.

PubMed

Catalán, Eva; Komilis, Dimitrios; Sánchez, Antoni

2017-07-01

One of the wastes associated with leather production in tannery industries is the hair residue generated during the dehairing process. Hair wastes are mainly dumped or managed through composting but recent studies propose the treatment of hair wastes through solid-state fermentation (SSF) to obtain proteases and compost. These enzymes are suitable for its use in an enzymatic dehairing process, as an alternative to the current chemical dehairing process. In the present work, two different scenarios for the valorization of the hair waste are proposed and assessed by means of life-cycle assessment: composting and SSF for protease production. Detailed data on hair waste composting and on SSF protease production are gathered from previous studies performed by our research group and from a literature survey. Background inventory data are mainly based on Ecoinvent version 3 from software SimaPro® 8. The main aim of this study was to identify which process results in the highest environmental impact. The SSF process was found to have lower environmental impacts than composting, due to the fact that the enzyme use in the dehairing process prevents the use of chemicals traditionally used in the dehairing process. This permits to reformulate an industrial process from the classical approach of waste management to a novel alternative based on circular economy.

Coupling hydrothermal liquefaction and anaerobic digestion for energy valorization from model biomass feedstocks.

PubMed

Posmanik, Roy; Labatut, Rodrigo A; Kim, Andrew H; Usack, Joseph G; Tester, Jefferson W; Angenent, Largus T

2017-06-01

Hydrothermal liquefaction converts food waste into oil and a carbon-rich hydrothermal aqueous phase. The hydrothermal aqueous phase may be converted to biomethane via anaerobic digestion. Here, the feasibility of coupling hydrothermal liquefaction and anaerobic digestion for the conversion of food waste into energy products was examined. A mixture of polysaccharides, proteins, and lipids, representing food waste, underwent hydrothermal processing at temperatures ranging from 200 to 350°C. The anaerobic biodegradability of the hydrothermal aqueous phase was examined through conducting biochemical methane potential assays. The results demonstrate that the anaerobic biodegradability of the hydrothermal aqueous phase was lower when the temperature of hydrothermal processing increased. The chemical composition of the hydrothermal aqueous phase affected the anaerobic biodegradability. However, no inhibition of biodegradation was observed for most samples. Combining hydrothermal and anaerobic digestion may, therefore, yield a higher energetic return by converting the feedstock into oil and biomethane. Copyright © 2017 Elsevier Ltd. All rights reserved.

Formic-acid-induced depolymerization of oxidized lignin to aromatics

NASA Astrophysics Data System (ADS)

Rahimi, Alireza; Ulbrich, Arne; Coon, Joshua J.; Stahl, Shannon S.

2014-11-01

Lignin is a heterogeneous aromatic biopolymer that accounts for nearly 30% of the organic carbon on Earth and is one of the few renewable sources of aromatic chemicals. As the most recalcitrant of the three components of lignocellulosic biomass (cellulose, hemicellulose and lignin), lignin has been treated as a waste product in the pulp and paper industry, where it is burned to supply energy and recover pulping chemicals in the operation of paper mills. Extraction of higher value from lignin is increasingly recognized as being crucial to the economic viability of integrated biorefineries. Depolymerization is an important starting point for many lignin valorization strategies, because it could generate valuable aromatic chemicals and/or provide a source of low-molecular-mass feedstocks suitable for downstream processing. Commercial precedents show that certain types of lignin (lignosulphonates) may be converted into vanillin and other marketable products, but new technologies are needed to enhance the lignin value chain. The complex, irregular structure of lignin complicates chemical conversion efforts, and known depolymerization methods typically afford ill-defined products in low yields (that is, less than 10-20wt%). Here we describe a method for the depolymerization of oxidized lignin under mild conditions in aqueous formic acid that results in more than 60wt% yield of low-molecular-mass aromatics. We present the discovery of this facile C-O cleavage method, its application to aspen lignin depolymerization, and mechanistic insights into the reaction. The broader implications of these results for lignin conversion and biomass refining are also considered.

3-D Survey Applied to Industrial Archaeology by Tls Methodology

NASA Astrophysics Data System (ADS)

Monego, M.; Fabris, M.; Menin, A.; Achilli, V.

2017-05-01

This work describes the three-dimensional survey of "Ex Stazione Frigorifera Specializzata": initially used for agricultural storage, during the years it was allocated to different uses until the complete neglect. The historical relevance and the architectural heritage that this building represents has brought the start of a recent renovation project and functional restoration. In this regard it was necessary a global 3-D survey that was based on the application and integration of different geomatic methodologies (mainly terrestrial laser scanner, classical topography, and GNSS). The acquisitions of point clouds was performed using different laser scanners: with time of flight (TOF) and phase shift technologies for the distance measurements. The topographic reference network, needed for scans alignment in the same system, was measured with a total station. For the complete survey of the building, 122 scans were acquired and 346 targets were measured from 79 vertices of the reference network. Moreover, 3 vertices were measured with GNSS methodology in order to georeference the network. For the detail survey of machine room were executed 14 scans with 23 targets. The 3-D global model of the building have less than one centimeter of error in the alignment (for the machine room the error in alignment is not greater than 6 mm) and was used to extract products such as longitudinal and transversal sections, plans, architectural perspectives, virtual scans. A complete spatial knowledge of the building is obtained from the processed data, providing basic information for restoration project, structural analysis, industrial and architectural heritage valorization.

Formic-acid-induced depolymerization of oxidized lignin to aromatics.

PubMed

Rahimi, Alireza; Ulbrich, Arne; Coon, Joshua J; Stahl, Shannon S

2014-11-13

Lignin is a heterogeneous aromatic biopolymer that accounts for nearly 30% of the organic carbon on Earth and is one of the few renewable sources of aromatic chemicals. As the most recalcitrant of the three components of lignocellulosic biomass (cellulose, hemicellulose and lignin), lignin has been treated as a waste product in the pulp and paper industry, where it is burned to supply energy and recover pulping chemicals in the operation of paper mills. Extraction of higher value from lignin is increasingly recognized as being crucial to the economic viability of integrated biorefineries. Depolymerization is an important starting point for many lignin valorization strategies, because it could generate valuable aromatic chemicals and/or provide a source of low-molecular-mass feedstocks suitable for downstream processing. Commercial precedents show that certain types of lignin (lignosulphonates) may be converted into vanillin and other marketable products, but new technologies are needed to enhance the lignin value chain. The complex, irregular structure of lignin complicates chemical conversion efforts, and known depolymerization methods typically afford ill-defined products in low yields (that is, less than 10-20wt%). Here we describe a method for the depolymerization of oxidized lignin under mild conditions in aqueous formic acid that results in more than 60wt% yield of low-molecular-mass aromatics. We present the discovery of this facile C-O cleavage method, its application to aspen lignin depolymerization, and mechanistic insights into the reaction. The broader implications of these results for lignin conversion and biomass refining are also considered.

Implementing apportionment strategy to identify costs in a multidisciplinary clinic.

PubMed

Ferraz, Renato Ribeiro Nogueira; Neri, Anna Sofia Costa; Barbosa, Estela Capelas; Silva, Marcus Vinícius Cesso da

2017-01-01

To present the implementation of an apportionment strategy proportional to the productive areas of a multidisciplinary clinic, defining the minimum values to be passed monthly to health professionals who work there. A study of the clinic structure was carried out, in which the area of occupation of each service was defined. Later the cost was prorated, allocating a value to each room, proportional to the space occupied. The apportionment implementation allowed the clinic managers to visualize the cost of each room, providing a value base for formation of a minimum amount necessary to be passed monthly to each professional, as a form of payment for rent of using their facilities. The risk of financial loss of the clinic was minimized due to variation of its productivity, as well as the conditions of transference at the time of hiring by professionals were clear, promoting greater confidence and safety in contract relations. Apresentar a implantação de uma estratégia de rateio proporcional às áreas produtivas de uma clínica multidisciplinar, definindo valores mínimos a serem repassados mensalmente aos profissionais de saúde que as ocupam. Estudo da estrutura da clínica, no qual foi definida, em metros quadrados, a área de ocupação de cada serviço. Em seguida, o custo foi rateado, alocando um valor a cada sala, proporcional ao espaço ocupado. A implantação do rateio possibilitou aos gestores da clínica estudada visualizar o custo de cada sala, fornecendo uma base de valor para formação de um valor mínimo necessário a ser repassado mensalmente para cada profissional, como forma de pagamento pelo aluguel de utilização de suas instalações. Minimizou-se o risco de prejuízo da clínica pela variação de sua produtividade, bem como ficaram claras as condições de repasse no momento de contratação do aluguel pelos profissionais, promovendo maior confiança e segurança na relação contratual.

Synergy of VHR Optical and VHR SAR Data for High Resolution DSM Generation over Large Flat Areas: Pleiades and TerraSAR-X Exploitation over the Low Lying Banks of the Yangtze River (PR China)

NASA Astrophysics Data System (ADS)

Huber, C.; Studer, M.; Giraud, H.; Durand, A.; Fruteau, L.; Lai, X.; Maxant, J.; Li, F.; Cao, L.; Tinel, C.; Yesou, H.

2014-11-01

Water resource monitoring and preservation are some of the biggest issues at global scale, and space technologies are playing a key role in various applications related to water topics the recently launched Sentinel-1, the future Sentinel-2 and 2020 altimetric mission SWOT, will be powerful for an accurate mapping of continental water resources but would be even more powerful and useful in association with high quality Digital Surface Models (DSM). Within the Thematic User Commissioning phase intending to valorize Pleiades imagery, 6 tri-stereo sets of Pleiades-HR images were acquired over test sites located within the Yangtze low-intermediate watershed reaches. At the same time, TanDEM-X InSAR pairs were acquired over the same area in order to get a wider coverage.

Antioxidant Properties of Water-Soluble Gum from Flaxseed Hulls

PubMed Central

Bouaziz, Fatma; Koubaa, Mohamed; Barba, Francisco J.; Roohinejad, Shahin; Chaabouni, Semia Ellouz

2016-01-01

Soluble flaxseed gum (SFG) was extracted from flax (Linum usitatissimum) hulls using hot water, and its functional groups and antioxidant properties were investigated using infrared spectroscopy and different antioxidant assays (2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid (ABTS), reducing power capacity, and β-carotene bleaching inhibition assay), respectively. The antioxidant capacity of SFG showed interesting DPPH radical-scavenging capacity (IC50 SFG = 2.5 mg·mL−1), strong ABTS radical scavenging activity (% inhibition ABTS = 75.6% ± 2.6% at 40 mg·mL−1), high reducing power capacity (RPSFG = 5 mg·mL−1), and potent β-carotene bleaching inhibition activity (IC50 SFG = 10 mg·mL−1). All of the obtained results demonstrate the promising potential use of SFG in numerous industrial applications, and a way to valorize flaxseed hulls. PMID:27490574

Microalgal process-monitoring based on high-selectivity spectroscopy tools: status and future perspectives.

PubMed

Podevin, Michael; Fotidis, Ioannis A; Angelidaki, Irini

2018-08-01

Microalgae are well known for their ability to accumulate lipids intracellularly, which can be used for biofuels and mitigate CO 2 emissions. However, due to economic challenges, microalgae bioprocesses have maneuvered towards the simultaneous production of food, feed, fuel, and various high-value chemicals in a biorefinery concept. On-line and in-line monitoring of macromolecules such as lipids, proteins, carbohydrates, and high-value pigments will be more critical to maintain product quality and consistency for downstream processing in a biorefinery to maintain and valorize these markets. The main contribution of this review is to present current and prospective advances of on-line and in-line process analytical technology (PAT), with high-selectivity - the capability of monitoring several analytes simultaneously - in the interest of improving product quality, productivity, and process automation of a microalgal biorefinery. The high-selectivity PAT under consideration are mid-infrared (MIR), near-infrared (NIR), and Raman vibrational spectroscopies. The current review contains a critical assessment of these technologies in the context of recent advances in software and hardware in order to move microalgae production towards process automation through multivariate process control (MVPC) and software sensors trained on "big data". The paper will also include a comprehensive overview of off-line implementations of vibrational spectroscopy in microalgal research as it pertains to spectral interpretation and process automation to aid and motivate development.

STEM learning research through a funds of knowledge lens

NASA Astrophysics Data System (ADS)

Civil, Marta

2016-03-01

This article examines STEM learning as a cultural process with a focus on non-dominant communities. Building on my work in funds of knowledge and mathematics education, I present three vignettes to raise some questions around connections between in-school and out-of-school mathematics. How do we define competence? How do task and environment affect engagement? What is the role of affect, language, and cognition in different settings? These vignettes serve to highlight the complexity of moving across different domains of STEM practice—everyday life, school, and STEM disciplines. Based on findings from occupational interviews I discuss characteristics of learning and engaging in everyday practices and propose several areas for further research, including the nature of everyday STEM practices, valorization of knowledge, language choice, and different forms of engagement.

Design of a mesoscale continuous flow route towards lithiated methoxyallene.

PubMed

Seghers, Sofie; Heugebaert, Thomas S A; Moens, Matthias; Sonck, Jolien; Thybaut, Joris; Stevens, Chris Victor

2018-05-11

The unique nucleophilic properties of lithiated methoxyallene allow for C-C bond formation with a wide variety of electrophiles, thus introducing an allenic group for further functionalization. This approach has yielded a tremendously broad range of (hetero)cyclic scaffolds, including API precursors. To date, however, its valorization at scale is hampered by the batch synthesis protocol which suffers from serious safety issues. Hence, the attractive heat and mass transfer properties of flow technology were exploited to establish a mesoscale continuous flow route towards lithiated methoxyallene. An excellent conversion of 94% was obtained, corresponding to a methoxyallene throughput of 8.2 g/h. The process is characterized by short reaction times, mild reaction conditions and a stoichiometric use of reagents. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Lignin Hydrogenolysis: Improving Lignin Disassembly through Formaldehyde Stabilization

PubMed Central

2017-01-01

Abstract Lignocellulosic biomass is available in large quantities and constitutes an attractive feedstock for the sustainable production of bulk and fine chemicals. Although methods have been established for the conversion of its cellulosic fractions, valorization of lignin has proven to be challenging. The difficulty in disassembling lignin originates from its heterogeneous structure and its propensity to undergo skeletal rearrangements and condensation reactions during biorefinery fractionation or biomass pretreatment processes. A strategy for hindering the generation of these resistive interunit linkages during biomass pretreatment has now been devised using formaldehyde as a stabilizing agent. The developed method when combined with Ru/C‐catalyzed hydrogenolysis allows for efficient disassembly of all three biomass fractions: (cellulose, hemicellulose, and lignin) and suggests that lignin upgrading can be integrated into prevailing biorefinery schemes. PMID:28394095

Separation of Lignin from Corn Stover Hydrolysate with Quantitative Recovery of Ionic Liquid

PubMed Central

Underkofler, Kaylee A.; Teixeira, Rodrigo E.; Pietsch, Stephen A.; Knapp, Kurtis G.; Raines, Ronald T.

2015-01-01

Abundant lignocellulosic biomass could become a source of sugars and lignin, potential feedstocks for the now emergent bio-renewable economy. The production and conversion of sugars from biomass have been well-studied, but far less is known about the production of lignin that is amenable to valorization. Here we report the isolation of lignin generated from the hydrolysis of biomass dissolved in the ionic liquid 1-butyl-3-methylimidazolium chloride. We show that lignin can be isolated from the hydrolysate slurry by simple filtration or centrifugation, and that the ionic liquid can be recovered quantitatively by a straightforward wash with water. The isolated lignin is not only free from ionic liquid, but also lacks cellulosic residues and is substantially depolymerized, making it a promising feedstock for valorization by conversion into fuels and chemicals. PMID:25866701

Valorization of glycerol through the production of biopolymers: the PHB case using Bacillus megaterium.

PubMed

Naranjo, Javier M; Posada, John A; Higuita, Juan C; Cardona, Carlos A

2013-04-01

In this work technical and economic analyses were performed to evaluate the glycerol transformation into Polyhydroxybutyrate using Bacillus megaterium. The production of PHB was compared using glycerol or glucose as substrates and similar yields were obtained. The total production costs for PHB generation with both substrates were estimated at an industrial scale. Compared to glucose, glycerol showed a 10% and 20% decrease in the PHB production costs using two different separation schemes respectively. Moreover, a 20% profit margin in the PHB sales price using glycerol as substrate resulted in a 166% valorization of crude glycerol. In this work, the feasibility of glycerol as feedstock for the production of PHB at laboratory (up to 60% PHB accumulation) and industrial (2.6US$/kgPHB) scales is demonstrated. Copyright © 2013 Elsevier Ltd. All rights reserved.

Proyecto para la medición sistemática de seeing en CASLEO

NASA Astrophysics Data System (ADS)

Fernández Lajus, E.; Forte, J. C.

La calidad del seeing astronómico es ciertamente uno de los parámetros mas importantes que caracterizan el sitio de un observatorio. Por tanto se desea determinar si el alto valor de seeing observado con el telescopio de 2.15 m se debe a efectos internos y/o del entorno a la cupula o si se debe simplemente al seeing propio del lugar. El actual mecanismo de refrigeración del espejo primario del 2.15, parece haber mejorado notablemente la calidad del seeing. Sin embargo se hace necesario saber hasta que punto el valor del seeing puede ser mejorado. La primera etapa del proyecto consistió en la puesta a punto del telescopio emplazado para este propósito y la adquisición de las primeras medidas tentativas de seeing.

Determinacion de Caracteristicas Opticas del Telescopio OAN150

NASA Astrophysics Data System (ADS)

Galan, M. J.; Cobos, F. J.

1987-05-01

En el Observatorio de Calar Alto, en Almería, España, está ubicado un telescopio de 15O-cms de diámetro -construído por REOSC- perteneciente al Observatorio Astronómico Nacional, con sede en Madrid, España. La infraestructura técnica del OAN ha sido tradicionalmente débil y actualmente se está haciendo un esfuerzo por fortalecerla. Existe una información muy limitada del telescopio en general; de su óptica en particular se conocían los valores de los parámetros principales pero sin saber si éstos corresponden a valores teóricos ó de construcción. Por ello se consideró necesario iniciar una investigación para conocer en detalle los valores reales de las componentes ópticas del telescopio, obteniéndose algunos resultados de interés. El primario del telescopio OANl5O es aproximadamente F/3 y el siste ma en su conjunto es F/8.2, con su sistema corrector de campo. En términos generales, la imagen es satisfactoria en todo el campo y, sin sistema corrector, la imagen axial también es buena. En un futuro muy cercano se piensa diseñar instrumentación adicional para este telescopio. Conocer con mayor precisión sus características puede ser de gran utilidad para tal fin, pues se efectúan los cálculos considerando conjuntamente al telescopio y al instrumento.

Accuracy of the Defining Characteristics of the Nursing Diagnosis Hypothermia in Newborns.

PubMed

de Aquino, Wislla Ketlly Menezes; Lopes, Marcos Venícios de Oliveira; da Silva, Viviane Martins; Fróes, Nathaly Bianka Moraes; de Menezes, Angélica Paixão; Almeida, Aline de Aquino Peres; Sobreira, Bianca Alves

2017-09-18

To analyze the accuracy of the defining characteristics of hypothermia in newborns and to verify associations between defining characteristics and clinical variables. A cross-sectional accuracy study with statistical analysis. Slow capillary refill, decrease in ventilation, peripheral vasoconstriction, and insufficient weight gain were the defining characteristics with the highest specificity values, while slow gastric emptying, skin cool to touch, irritability, and bradycardia were the defining characteristics with the highest values for both sensitivity and specificity. Slow gastric emptying, skin cool to touch, irritability, and bradycardia are good clinical indicators to infer initial stages of hypothermia and to confirm its presence. Accuracy measures may contribute to the improvement of the diagnostic inferential process. Analisar acurácia das características definidoras de Hipotermia em recém-nascidos e identificar a associação delas com variáveis clínicas. MÉTODO: Estudo de acurácia transversal com análise estatística. Preenchimento capilar lento, diminuição da ventilação, vasoconstrição periférica e ganho de peso insuficiente apresentaram valores altos de especificidade enquanto esvaziamento gástrico lento, pele fria, irritabilidade e bradicardia apresentaram valores elevados de sensibilidade e especificidade. CONCLUSÃO: Esvaziamento gástrico lento, pele fria, irritabilidade e bradicardia são úteis para inferir estágios iniciais de hipotermia e para confirmação diagnóstica. IMPLICAÇÕES PARA PRÁTICA DE ENFERMAGEM: Medidas de acurácia podem contribuir para o processo de inferência do diagnóstico hipotermia. © 2017 NANDA International, Inc.

Forty research issues for the redesign of animal production systems in the 21st century.

PubMed

Dumont, B; González-García, E; Thomas, M; Fortun-Lamothe, L; Ducrot, C; Dourmad, J Y; Tichit, M

2014-08-01

Agroecology offers a scientific and operational framework for redesigning animal production systems (APS) so that they better cope with the coming challenges. Grounded in the stimulation and valorization of natural processes to reduce inputs and pollutions in agroecosystems, it opens a challenging research agenda for the animal science community. In this paper, we identify key research issues that define this agenda. We first stress the need to assess animal robustness by measurable traits, to analyze trade-offs between production and adaptation traits at within-breed and between-breed level, and to better understand how group selection, epigenetics and animal learning shape performance. Second, we propose research on the nutritive value of alternative feed resources, including the environmental impacts of producing these resources and their associated non-provisioning services. Third, we look at how the design of APS based on agroecological principles valorizes interactions between system components and promotes biological diversity at multiple scales to increase system resilience. Addressing such challenges requires a collection of theories and models (concept-knowledge theory, viability theory, companion modeling, etc.). Acknowledging the ecology of contexts and analyzing the rationales behind traditional small-scale systems will increase our understanding of mechanisms contributing to the success or failure of agroecological practices and systems. Fourth, the large-scale development of agroecological products will require analysis of resistance to change among farmers and other actors in the food chain. Certifications and market-based incentives could be an important lever for the expansion of agroecological alternatives in APS. Finally, we question the suitability of current agriculture extension services and public funding mechanisms for scaling-up agroecological practices and systems.

Tribosystems based on multilayered micro/nanocrystalline CVD diamond coatings =

NASA Astrophysics Data System (ADS)

Shabani, Mohammadmehdi

A combinacao das caracteristicas do diamante microcristalino (MCD) e nanocristalino (NCD), tais como elevada adesao do MCD e a baixa rugosidade superficial e baixo coeficiente de atrito do NCD, e ideal para aplicacoes tribologicas exigentes. Deste modo, o presente trabalho centrou-se no desenvolvimento de revestimentos em multicamada MCD/NCD. Filmes com dez camadas foram depositados em amostras de cerâmicos de Si3N4 pela tecnica de deposicao quimica em fase vapor assistida por filamento quente (HFCVD). A microestrutura, qualidade do diamante e adesao foram investigadas usando tecnicas como SEM, AFM, espectroscopia Raman, DRX, indentacao Brale e perfilometria otica 3D. Diversas geometrias para aplicacoes distintas foram revestidas: discos e esferas para testes tribologicos a escala laboratorial, e para testes em servico, aneis de empanques mecânicos e pastilhas de corte para torneamento. Nos ensaios tribologicos esfera-sobre-plano em movimento reciproco, sob 10-90% de humidade relativa (RH), os valores medios dos coeficientes de atrito maximo e em estado estacionario sao de 0,32 e 0,09, respetivamente. Em relacao aos coeficientes de desgaste, observou-se um valor minimo de cerca de 5,2x10-8 mm3N-1m-1 para valores intermedios de 20-25% de RH. A humidade relativa tem um forte efeito sobre o valor da carga critica que triplica a partir de 40 N a 10% RH para 120 N a 90% de RH. No intervalo de temperaturas 50-100 °C, as cargas criticas sao semelhantes as obtidas em condicoes de baixa RH ( 10-25%). A vida util das ferramentas com revestimento de dez camadas alternadas MCD/NCD e 24 mum de espessura total no torneamento de um composito de matriz metalica Al- 15 vol% Al2O3 (Al-MMC) e melhor do que a maioria das ferramentas de diamante CVD encontradas na literatura, e semelhante a maioria das ferramentas de diamante policristalino (PCD). A formacao de cratera ocorre por desgaste sucessivo das varias camadas, atrasando a delaminacao total do revestimento de diamante do substrato, ao contrario do que acontece com os revestimentos monocamada. Os aneis de empanque testados com biodiesel apresentaram coeficientes de desgaste (4,1x10-10 mm3N-1m-1) duas ordens de grandeza menores do que em ensaios esfera-sobre-plano em movimento reciproco (k = 5,0x10-8 mm3N-1m-1), mas nao foi possivel obter vedacao completa devido a sobreaquecimento do fluido. Esta condicao foi obtida com agua sob pressao, para condicoes P.V na gama 0,72-5,3 MPa.ms-1. Um coeficiente de atrito em estado estacionario de 0,04 e um valor de coeficiente de desgaste de 6,0x10-10 mm3N-1m-1, caracteristico de um regime desgaste ultra-suave, revelam o alto desempenho deste tribossistema.

Biorefineries of carbon dioxide: From carbon capture and storage (CCS) to bioenergies production.

PubMed

Cheah, Wai Yan; Ling, Tau Chuan; Juan, Joon Ching; Lee, Duu-Jong; Chang, Jo-Shu; Show, Pau Loke

2016-09-01

Greenhouse gas emissions have several adverse environmental effects, like pollution and climate change. Currently applied carbon capture and storage (CCS) methods are not cost effective and have not been proven safe for long term sequestration. Another attractive approach is CO2 valorization, whereby CO2 can be captured in the form of biomass via photosynthesis and is subsequently converted into various form of bioenergy. This article summarizes the current carbon sequestration and utilization technologies, while emphasizing the value of bioconversion of CO2. In particular, CO2 sequestration by terrestrial plants, microalgae and other microorganisms are discussed. Prospects and challenges for CO2 conversion are addressed. The aim of this review is to provide comprehensive knowledge and updated information on the current advances in biological CO2 sequestration and valorization, which are essential if this approach is to achieve environmental sustainability and economic feasibility. Copyright © 2016 Elsevier Ltd. All rights reserved.

Lignin‐Derived Thioacidolysis Dimers: Reevaluation, New Products, Authentication, and Quantification

PubMed Central

Yue, Fengxia; Regner, Matt; Sun, Runcang

2017-01-01

Abstract Lignin structural studies play an essential role both in understanding the development of plant cell walls and for valorizing lignocellulosics as renewable biomaterials. Dimeric products released by selectively cleaving β–aryl ether linkages between lignin units reflect the distribution of recalcitrant lignin units, but have been neither absolutely defined nor quantitatively determined. Here, 12 guaiacyl‐type thioacidolysis dimers were identified and quantified using newly synthesized standards. One product previously attributed to deriving from β–1‐coupled units was established as resulting from β–5 units, correcting an analytical quandary. Another longstanding dilemma, that no β–β dimers were recognized in thioacidolysis products from gymnosperms, was resolved with the discovery of two such authenticated compounds. Individual GC response factors for each standard compound allowed rigorous quantification of dimeric products released from softwood lignins, affording insight into the various interunit‐linkage distributions in lignins and thereby guiding the valorization of lignocellulosics. PMID:28125766

Separation of lignin from corn stover hydrolysate with quantitative recovery of ionic liquid

DOE PAGES

Underkofler, Kaylee A.; Teixeira, Rodrigo E.; Pietsch, Stephen A.; ...

2015-02-20

Abundant lignocellulosic biomass could become a source of sugars and lignin, potential feedstocks for the now emergent biorenewable economy. The production and conversion of sugars from biomass have been well-studied, but far less is known about the production of lignin that is amenable to valorization. In this paper, we report the isolation of lignin generated from the hydrolysis of biomass dissolved in the ionic liquid 1-butyl-3-methylimidazolium chloride. We show that lignin can be isolated from the hydrolysate slurry by simple filtration or centrifugation, and that the ionic liquid can be recovered quantitatively by a straightforward wash with water. Finally, themore » isolated lignin is not only free from ionic liquid but also lacks cellulosic residues and is substantially depolymerized, making it a promising feedstock for valorization by conversion into fuels and chemicals.« less

Total number of planetary nebulae in different galaxies and the PN distance scale.

NASA Astrophysics Data System (ADS)

Peimbert, M.

1990-12-01

RESUMEN A partir de una muestra de quince galaxias se encuentra que la tasa de natalidad de nebulosas planetarias por unidad de luminosidad, , disminuye al aumentar la luminosidad y al aumentar (B - V)0. Se discuten posibles explicaciones para estos resultados. Se estima el valor de para la Galaxia y a partir de el se encuentra que el numero total de nebulosas planetarias en nuestra galaxia con R < 0.64 pc- es de 7200 j 1800. El valor galactico de implica que la mayorfa de las estrellas de masa intermedia pasa por la etapa de nebulosa planetaria. El valor galactico de , la tasa de mortalidad estelar por unidad de luminosidad y la tasa de natalidad de enanas blancas favorecen escalas de distancias largas para nebulosas planetarias, como la de Cudworth (1974) y la de Mallik y Peimbert (1988). ABSTRACT From a sample of fifteen galaxies it is found that the birth rate of PN per unit luminosity, , decreases with increasing luminosity and with increasing (B - V)0 possible reasons for these relationships are discussed. The value for the Galaxy is estimated and, from it, a total number of PN of 7200 # 1800 wid R < 0.64 pc is obtained. The galactic value implies that most of the intermediate mass stars go through the PN stage. The galactic value, the stellar death rate per unit luminosity and the white dwarf birth rate are in favor of long distance scales to PN like those of Cudworth (1974) and Mallik and (1988). Key wonis: NEBULAE.PLANETARY - STARS-EVOLUTION - STARS-SThLIAR STA. S

Valorization of starchy, cellulosic, and sugary food waste into hydroxymethylfurfural by one-pot catalysis.

PubMed

Yu, Iris K M; Tsang, Daniel C W; Yip, Alex C K; Chen, Season S; Ok, Yong Sik; Poon, Chi Sun

2017-10-01

This study aimed to produce a high-value platform chemical, hydroxymethylfurfural (HMF), from food waste and evaluate the catalytic performance of trivalent and tetravalent metals such as AlCl 3 , CrCl 3 , FeCl 3 , Zr(O)Cl 2 , and SnCl 4 for one-pot conversion. Starchy food waste, e.g., cooked rice and penne produced 4.0-8.1 wt% HMF and 46.0-64.8 wt% glucose over SnCl 4 after microwave heating at 140 °C for 20 min. This indicated that starch hydrolysis was effectively catalyzed but subsequent glucose isomerization was rate-limited during food waste valorization, which could be enhanced by 40-min reaction to achieve 22.7 wt% HMF from cooked rice. Sugary food waste, e.g., kiwifruit and watermelon, yielded up to 13 wt% HMF over Sn catalyst, which mainly resulted from naturally present fructose. Yet, organic acids in fruits may hinder Fe-catalyzed dehydration by competing for the Lewis sites. In contrast, conversion of raw mixed vegetables as cellulosic food waste was limited by marginal hydrolysis at the studied conditions (120-160 °C and 20-40 min). It is interesting to note that tetravalent metals enabled HMF production at a lower temperature and shorter time, while trivalent metals could achieve a higher HMF selectivity at an elevated temperature. Further studies on kinetics, thermodynamics, and reaction pathways of food waste valorization are recommended. Copyright © 2017 Elsevier Ltd. All rights reserved.

Search for a new economic optimum in the management of household waste in Tiaret city (western Algeria).

PubMed

Asnoune, M; Abdelmalek, F; Djelloul, A; Mesghouni, K; Addou, A

2016-11-01

In household waste matters, the objective is always to conceive an optimal integrated system of management, where the terms 'optimal' and 'integrated' refer generally to a combination between the waste and the techniques of treatment, valorization and elimination, which often aim at the lowest possible cost. The management optimization of household waste using operational methodologies has not yet been applied in any Algerian district. We proposed an optimization of the valorization of household waste in Tiaret city in order to lower the total management cost. The methodology is modelled by non-linear mathematical equations using 28 variables of decision and aims to assign optimally the seven components of household waste (i.e. plastic, cardboard paper, glass, metals, textiles, organic matter and others) among four centres of treatment [i.e. waste to energy (WTE) or incineration, composting (CM), anaerobic digestion (ANB) or methanization and landfilling (LF)]. The analysis of the obtained results shows that the variation of total cost is mainly due to the assignment of waste among the treatment centres and that certain treatment cannot be applied to household waste in Tiaret city. On the other hand, certain techniques of valorization have been favoured by the optimization. In this work, four scenarios have been proposed to optimize the system cost, where the modelling shows that the mixed scenario (the three treatment centres CM, ANB, LF) suggests a better combination of technologies of waste treatment, with an optimal solution for the system (cost and profit). © The Author(s) 2016.

Regulatory environment and claims - limits and opportunities.

PubMed

Martin, Ambroise

2010-01-01

During the past decade, the use of claims became more and more important in many countries in relation to the increased awareness of consumer about the link between foods and health, offering to industry a valuable opportunity to differentiate and valorize their products and to promote innovation. However, more and more stringent regulations are developed, all based on the general principles adopted by the Codex Alimentarius Commission. In addition to the different regulatory processes and administrative requirements according to the country, the high level (and cost) of scientific substantiation of claims, the constraints introduced by nutrient profiles and the poor knowledge of the impact on consumer depending on the cultural contexts may limit these opportunities or, at least complicate their use. All these issues are briefly analyzed, highlighting some striking convergences and differences between countries. Copyright © 2010 S. Karger AG, Basel.

A flat microbial fuel cell for decentralized wastewater valorization: process performance and optimization potential.

PubMed

Peixoto, Luciana; Rodrigues, Alexandrina L; Martins, Gilberto; Nicolau, Ana; Brito, António G; Silva, M Manuela; Parpot, Pier; Nogueira, Regina

2013-01-01

A very compact flat microbial fuel cell (MFC), with 64 cm2 each for the anode surface and the cathode surface and 1 cm3 each for the anode and cathode chambers, was tested for wastewater treatment with simultaneous electricity production with the ultimate goal of implementing an autonomous service in decentralized wastewater treatment systems. The MFC was operated with municipal wastewater in sequencing batch reactor mode with re-circulation. Current densities up to 407 W/m3 and a carbon removal of 83% were obtained. Interruption in the operation slightly decreased power density, while the re-circulation ratio did not influence power generation. The anode biofilm presented high conductivity, activity and diversity. The denaturing gradient gel electrophoresis band-pattern of the DNA showed the presence of several ribotypes with different species of Shewanellaceae and Geobacteraceae families.

Performances and microbial features of an aerobic packed-bed biofilm reactor developed to post-treat an olive mill effluent from an anaerobic GAC reactor

PubMed Central

Bertin, Lorenzo; Colao, Maria Chiara; Ruzzi, Maurizio; Marchetti, Leonardo; Fava, Fabio

2006-01-01

Background Olive mill wastewater (OMW) is the aqueous effluent of olive oil producing processes. Given its high COD and content of phenols, it has to be decontaminated before being discharged. Anaerobic digestion is one of the most promising treatment process for such an effluent, as it combines high decontamination efficiency with methane production. The large scale anaerobic digestion of OMWs is normally conducted in dispersed-growth reactors, where however are generally achieved unsatisfactory COD removal and methane production yields. The possibility of intensifying the performance of the process using a packed bed biofilm reactor, as anaerobic treatment alternative, was demonstrated. Even in this case, however, a post-treatment step is required to further reduce the COD. In this work, a biological post-treatment, consisting of an aerobic biological "Manville" silica bead-packed bed aerobic reactor, was developed, tested for its ability to complete COD removal from the anaerobic digestion effluents, and characterized biologically through molecular tools. Results The aerobic post-treatment was assessed through a 2 month-continuous feeding with the digested effluent at 50.42 and 2.04 gl-1day-1 of COD and phenol loading rates, respectively. It was found to be a stable process, able to remove 24 and 39% of such organic loads, respectively, and to account for 1/4 of the overall decontamination efficiency displayed by the anaerobic-aerobic integrated system when fed with an amended OMW at 31.74 and 1.70 gl-1day-1 of COD and phenol loading rates, respectively. Analysis of 16S rRNA gene sequences of biomass samples from the aerobic reactor biofilm revealed that it was colonized by Rhodobacterales, Bacteroidales, Pseudomonadales, Enterobacteriales, Rhodocyclales and genera incertae sedis TM7. Some taxons occurring in the influent were not detected in the biofilm, whereas others, such as Paracoccus, Pseudomonas, Acinetobacter and Enterobacter, enriched significantly in the biofilter throughout the treatment. Conclusion The silica-bead packed bed biofilm reactor developed and characterized in this study was able to significantly decontaminate anaerobically digested OMWs. Therefore, the application of an integrated anaerobic-aerobic process resulted in an improved system for valorization and decontamination of OMWs. PMID:16595023

Valorization of GaN based metal-organic chemical vapor deposition dust a semiconductor power device industry waste through mechanochemical oxidation and leaching: A sustainable green process.

PubMed

Swain, Basudev; Mishra, Chinmayee; Lee, Chan Gi; Park, Kyung-Soo; Lee, Kun-Jae

2015-07-01

Dust generated during metal organic vapor deposition (MOCVD) process of GaN based semiconductor power device industry contains significant amounts of gallium and indium. These semiconductor power device industry wastes contain gallium as GaN and Ga0.97N0.9O0.09 is a concern for the environment which can add value through recycling. In the present study, this waste is recycled through mechanochemical oxidation and leaching. For quantitative recovery of gallium, two different mechanochemical oxidation leaching process flow sheets are proposed. In one process, first the Ga0.97N0.9O0.09 of the MOCVD dust is leached at the optimum condition. Subsequently, the leach residue is mechanochemically treated, followed by oxidative annealing and finally re-leached. In the second process, the MOCVD waste dust is mechanochemically treated, followed by oxidative annealing and finally leached. Both of these treatment processes are competitive with each other, appropriate for gallium leaching and treatment of the waste MOCVD dust. Without mechanochemical oxidation, 40.11 and 1.86 w/w% of gallium and Indium are leached using 4M HCl, 100°C and pulp density of 100 kg/m(3,) respectively. After mechanochemical oxidation, both these processes achieved 90 w/w% of gallium and 1.86 w/w% of indium leaching at their optimum condition. Copyright © 2015 Elsevier Inc. All rights reserved.

A comparison of estimated and calculated effective porosity

NASA Astrophysics Data System (ADS)

Stephens, Daniel B.; Hsu, Kuo-Chin; Prieksat, Mark A.; Ankeny, Mark D.; Blandford, Neil; Roth, Tracy L.; Kelsey, James A.; Whitworth, Julia R.

Effective porosity in solute-transport analyses is usually estimated rather than calculated from tracer tests in the field or laboratory. Calculated values of effective porosity in the laboratory on three different textured samples were compared to estimates derived from particle-size distributions and soil-water characteristic curves. The agreement was poor and it seems that no clear relationships exist between effective porosity calculated from laboratory tracer tests and effective porosity estimated from particle-size distributions and soil-water characteristic curves. A field tracer test in a sand-and-gravel aquifer produced a calculated effective porosity of approximately 0.17. By comparison, estimates of effective porosity from textural data, moisture retention, and published values were approximately 50-90% greater than the field calibrated value. Thus, estimation of effective porosity for chemical transport is highly dependent on the chosen transport model and is best obtained by laboratory or field tracer tests. Résumé La porosité effective dans les analyses de transport de soluté est habituellement estimée, plutôt que calculée à partir d'expériences de traçage sur le terrain ou au laboratoire. Les valeurs calculées de la porosité effective au laboratoire sur trois échantillons de textures différentes ont été comparées aux estimations provenant de distributions de taille de particules et de courbes caractéristiques sol-eau. La concordance était plutôt faible et il semble qu'il n'existe aucune relation claire entre la porosité effective calculée à partir des expériences de traçage au laboratoire et la porosité effective estimée à partir des distributions de taille de particules et de courbes caractéristiques sol-eau. Une expérience de traçage de terrain dans un aquifère de sables et de graviers a fourni une porosité effective calculée d'environ 0,17. En comparaison, les estimations de porosité effective de données de texture, de teneur en eau et les valeurs publiées étaient environ 50 à 90% plus fortes que la valeur calibrée sur le terrain. Ainsi, l'estimation de la porosité effective pour le transport en solution dépend fortement du modèle de transport utilisé et est préférable lorsqu'elle est obtenue à partir d'expériences de traçage de laboratoire ou de terrain. Resumen La porosidad efectiva en el análisis del transporte de solutos se suele estimar, en lugar de calcularse a partir de ensayos de trazadores en el campo o el laboratorio. Los valores calculados de la porosidad efectiva en el laboratorio en tres muestras de distintas texturas se compararon con las estimaciones realizadas a partir de las distribuciones de tamaño de partículas y de las curvas características suelo-agua. El ajuste fue bastante pobre y parece que no existe una relación clara entre los valores de la porosidad efectiva calculados mediante los tres métodos. Un ensayo de trazadores en el campo, en un acuífero formado por arenas y gravas, dio lugar a un valor de porosidad efectiva calculado de 0.17. Las estimaciones realizadas a partir de los datos de textura, humedad retenida y valores publicados eran entre un 50-90 por ciento mayores que el valor calibrado en el ensayo de campo. Así, la estimación del valor de la porosidad efectiva para el transporte químico depende mucho del modelo de transporte seleccionado y es mejor si se obtiene a partir de ensayos de laboratorio o de campo.

Biotechnological conversion of spent coffee grounds into lactic acid.

PubMed

Hudeckova, H; Neureiter, M; Obruca, S; Frühauf, S; Marova, I

2018-04-01

This work investigates the potential bioconversion of spent coffee grounds (SCG) into lactic acid (LA). SCG were hydrolysed by a combination of dilute acid treatment and subsequent application of cellulase. The SCG hydrolysate contained a considerable amount of reducing sugars (9·02 ± 0·03 g l -1 , glucose; 26·49 ± 0·10 g l -1 galactose and 2·81 ± 0·07 g l -1 arabinose) and it was used as a substrate for culturing several lactic acid bacteria (LAB) and LA-producing Bacillus coagulans. Among the screened micro-organisms, Lactobacillus rhamnosus CCM 1825 was identified as the most promising producer of LA on a SCG hydrolysate. Despite the inhibitory effect exerted by furfural and phenolic compounds in the medium, reasonably high LA concentrations (25·69 ± 1·45 g l -1 ) and yields (98%) were gained. Therefore, it could be demonstrated that SCG is a promising raw material for the production of LA and could serve as a feedstock for the sustainable large-scale production of LA. Spent coffee grounds (SCG) represent solid waste generated in millions of tonnes by coffee-processing industries. Their disposal represents a serious environmental problem; however, SCG could be valorized within a biorefinery concept yielding various valuable products. Herein, we suggest that SCG can be used as a complex carbon source for the lactic acid production. © 2018 The Society for Applied Microbiology.

Study of Separation and Fouling of Reverse Osmosis Membranes during Model Hydrolysate Solution Filtration.

PubMed

Ajao, Olumoye; Rahni, Mohamed; Marinova, Mariya; Chadjaa, Hassan; Savadogo, Oumarou

2017-12-15

Prehydrolysate, a dilute solution consisting mainly of pentoses, hexoses, and lesser quantities of organic acids, furfural and phenolics, is generated in the Kraft dissolving pulp process. An obstacle facing the valorization of the solution in hemicellulose biorefineries, by conversion of the sugars into bioproducts such as furfural, is the low sugar concentration. Membrane filtration is typically proposed in several hemicellulose based biorefineries for concentrating the solution, although they are usually generated using different wood species, pretreatment methods, and operating conditions. However, the chemical composition of the solutions is generally not considered. Also, the combined effect of composition and operating conditions is rarely investigated for biorefinery applications. The purpose of this work was to determine the impact of the prehydrolysate composition and operating parameters on the component separation and permeate flux during membrane filtration. Using model prehydrolysate solutions, two commercial reverse osmosis (RO) membranes were screened, and one was selected for use, based on its higher sugar and acetic acid retention. A Taguchi L18 experimental design array was then applied to determine the dominant parameters and limiting factors. Results showed that the feed pressure and temperature have the highest impact on permeate flux, but the least effect on sugar retention. Further experiments to quantify flux decline, due to fouling and osmotic pressure, showed that furfural has the highest membrane fouling tendency, and can limit the lifetime of the membrane. Regeneration of the membrane by cleaning with a sodium hydroxide solution is also effective for reversing fouling. It has been demonstrated that RO can efficiently and sustainably concentrate wood prehydrolysate.

Study of Separation and Fouling of Reverse Osmosis Membranes during Model Hydrolysate Solution Filtration

PubMed Central

Rahni, Mohamed; Marinova, Mariya; Chadjaa, Hassan; Savadogo, Oumarou

2017-01-01

Prehydrolysate, a dilute solution consisting mainly of pentoses, hexoses, and lesser quantities of organic acids, furfural and phenolics, is generated in the Kraft dissolving pulp process. An obstacle facing the valorization of the solution in hemicellulose biorefineries, by conversion of the sugars into bioproducts such as furfural, is the low sugar concentration. Membrane filtration is typically proposed in several hemicellulose based biorefineries for concentrating the solution, although they are usually generated using different wood species, pretreatment methods, and operating conditions. However, the chemical composition of the solutions is generally not considered. Also, the combined effect of composition and operating conditions is rarely investigated for biorefinery applications. The purpose of this work was to determine the impact of the prehydrolysate composition and operating parameters on the component separation and permeate flux during membrane filtration. Using model prehydrolysate solutions, two commercial reverse osmosis (RO) membranes were screened, and one was selected for use, based on its higher sugar and acetic acid retention. A Taguchi L18 experimental design array was then applied to determine the dominant parameters and limiting factors. Results showed that the feed pressure and temperature have the highest impact on permeate flux, but the least effect on sugar retention. Further experiments to quantify flux decline, due to fouling and osmotic pressure, showed that furfural has the highest membrane fouling tendency, and can limit the lifetime of the membrane. Regeneration of the membrane by cleaning with a sodium hydroxide solution is also effective for reversing fouling. It has been demonstrated that RO can efficiently and sustainably concentrate wood prehydrolysate. PMID:29244761

Valorization of industrial waste and by-product streams via fermentation for the production of chemicals and biopolymers.

PubMed

Koutinas, Apostolis A; Vlysidis, Anestis; Pleissner, Daniel; Kopsahelis, Nikolaos; Lopez Garcia, Isabel; Kookos, Ioannis K; Papanikolaou, Seraphim; Kwan, Tsz Him; Lin, Carol Sze Ki

2014-04-21

The transition from a fossil fuel-based economy to a bio-based economy necessitates the exploitation of synergies, scientific innovations and breakthroughs, and step changes in the infrastructure of chemical industry. Sustainable production of chemicals and biopolymers should be dependent entirely on renewable carbon. White biotechnology could provide the necessary tools for the evolution of microbial bioconversion into a key unit operation in future biorefineries. Waste and by-product streams from existing industrial sectors (e.g., food industry, pulp and paper industry, biodiesel and bioethanol production) could be used as renewable resources for both biorefinery development and production of nutrient-complete fermentation feedstocks. This review focuses on the potential of utilizing waste and by-product streams from current industrial activities for the production of chemicals and biopolymers via microbial bioconversion. The first part of this review presents the current status and prospects on fermentative production of important platform chemicals (i.e., selected C2-C6 metabolic products and single cell oil) and biopolymers (i.e., polyhydroxyalkanoates and bacterial cellulose). In the second part, the qualitative and quantitative characteristics of waste and by-product streams from existing industrial sectors are presented. In the third part, the techno-economic aspects of bioconversion processes are critically reviewed. Four case studies showing the potential of case-specific waste and by-product streams for the production of succinic acid and polyhydroxyalkanoates are presented. It is evident that fermentative production of chemicals and biopolymers via refining of waste and by-product streams is a highly important research area with significant prospects for industrial applications.

Women of Valor in the American Civil War

DTIC Science & Technology

1999-04-01

Newcomb and Agnes Scott. Coeducational universities were Cornell, Michigan, Wisconsin, Kansas, Missouri, California, Texas and Kentucky. To meet the...courses separate from men. By the 1890’s Syracuse, California, Iowa and Howard Universities were among the dozen coeducational medical colleges

A dynamic model for organic waste management in Quebec (D-MOWIQ) as a tool to review environmental, societal and economic perspectives of a waste management policy.

PubMed

Hénault-Ethier, Louise; Martin, Jean-Philippe; Housset, Johann

2017-08-01

A dynamic systems model of organic waste management for the province of Quebec, Canada, was built. Six distinct modules taking into account social, economical and environmental issues and perspectives were included. Five scenarios were designed and tested to identify the potential consequences of different governmental and demographic combinations of decisions over time. Among these scenarios, one examines Quebec's organic waste management policy (2011-2015), while the other scenarios represent business as usual or emphasize ecology, economy or social benefits in the decision-making process. Model outputs suggest that the current governmental policy should yield favorable environmental benefits, energy production and waste valorization. The projections stemming from the current policy action plan approach the benefits gained by another scenario emphasizing the environmental aspects in the decision-making process. As expected, without the current policy and action plan in place, or business as usual, little improvements are expected in waste management compared to current trends, and strictly emphasizing economic imperatives does not favor sustainable organic waste management. Copyright © 2017. Published by Elsevier Ltd.

Short wave infrared hyperspectral imaging for recovered post-consumer single and mixed polymers characterization

NASA Astrophysics Data System (ADS)

Bonifazi, Giuseppe; Palmieri, Roberta; Serranti, Silvia

2015-03-01

Postconsumer plastics from packing and packaging represent about the 60% of the total plastic wastes (i.e. 23 million of tons) produced in Europe. The EU Directive (2014/12/EC) fixes as target that the 60%, by weight, of packaging waste has to be recovered, or thermally valorized. When recovered, the same directive established that packaging waste has to be recycled in a percentage ranging between 55% (minimum) and 60% (maximum). The non-respect of these rules can produce that large quantities of end-of-life plastic products, specifically those utilized for packaging, are disposed-off, with a strong environmental impact. The application of recycling strategies, finalized to polymer recovery, can represent an opportunity to reduce: i) not renewable raw materials (i.e. oil) utilization, ii) carbon dioxide emissions and iii) amount of plastic waste disposed-off. Aim of this work was to perform a full characterization of different end-of-life polymers based products, constituted not only by single polymers but also of mixtures, in order to realize their identification for quality control and/or certification assessment. The study was specifically addressed to characterize the different recovered products as resulting from a recycling plant where classical processing flow-sheets, based on milling, classification and separation, are applied. To reach this goal, an innovative sensing technique, based on the utilization of a HyperSpectral[b] I[/b]maging (HSI) device working in the SWIR region (1000-2500 nm), was investigated. Following this strategy, single polymers and/or mixed polymers recovered were correctly recognized. The main advantage of the proposed approach is linked to the possibility to perform "on-line" analyses, that is directly on the different material flow streams, as resulting from processing, without any physical sampling and classical laboratory "off-line" determination.

Platinum recovery from industrial process streams by halophilic bacteria: Influence of salt species and platinum speciation.

PubMed

Maes, Synthia; Claus, Mathias; Verbeken, Kim; Wallaert, Elien; De Smet, Rebecca; Vanhaecke, Frank; Boon, Nico; Hennebel, Tom

2016-11-15

The increased use and criticality of platinum asks for the development of effective low-cost strategies for metal recovery from process and waste streams. Although biotechnological processes can be applied for the valorization of diluted aqueous industrial streams, investigations considering real stream conditions (e.g., high salt levels, acidic pH, metal speciation) are lacking. This study investigated the recovery of platinum by a halophilic microbial community in the presence of increased salt concentrations (10-80 g L -1 ), different salt matrices (phosphate salts, sea salts and NH 4 Cl) and a refinery process stream. The halophiles were able to recover 79-99% of the Pt at 10-80 g L -1 salts and at pH 2.3. Transmission electron microscopy suggested a positive correlation between intracellular Pt cluster size and elevated salt concentrations. Furthermore, the halophiles recovered 46-95% of the Pt-amine complex Pt[NH 3 ] 4 2+ from a process stream after the addition of an alternative Pt source (K 2 PtCl 4 , 0.1-1.0 g L -1 Pt). Repeated Pt-tetraamine recovery (from an industrial process stream) was obtained after concomitant addition of fresh biomass and harvesting of Pt saturated biomass. This study demonstrates how aqueous Pt streams can be transformed into Pt rich biomass, which would be an interesting feed of a precious metals refinery. Copyright © 2016 Elsevier Ltd. All rights reserved.

Philip T. Pienkos | NREL

Science.gov Websites

Valorization: Development of a Methane-to-Adipic Acid Bioprocess (consultant) Areas of Expertise Molecular engineering Enzyme and protein engineering Techno-economic analysis Education Ph.D., Molecular Biology Principal Research Supervisor, NREL, Aug. 2007-May 2011 Research Director, Molecular Logix, Inc., The

75 FR 79445 - Unblocking of Specially Designated Nationals and Blocked Persons Pursuant to Executive Order 12978

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-20

... DEPOSITO POPULAR DE DROGAS S.A., Cali, Colombia; c/o INVERSIONES Y CONSTRUCCIONES ABC S.A., Cali, Colombia... KRESSFOR DE COLOMBIA S.A., Bogota, Colombia; c/o INVERSIONES ARA LTDA., Cali, Colombia; c/o VALORES...

Novel approaches mediated by tailor-made green solvents for the extraction of phenolic compounds from agro-food industrial by-products.

PubMed

Fernández, María de Los Ángeles; Espino, Magdalena; Gomez, Federico J V; Silva, María Fernanda

2018-01-15

An environmentally friendly method for the phenolic compound extraction from agro-food industrial by-products was developed in order to contribute with their sustainable valorization. A Natural Deep Eutectic Solvent was chemometrically-designed for the first time and compared with traditional solvents in terms of analyte stabilization. The combination of lactic acid, glucose and 15% water (LGH-15) was selected as optimal. A high-efficiency ultrasound-assisted extraction mediated by LGH-15 prior to HPLC-DAD allows the determination of 14 phenols in onion, olive, tomato and pear industrial by-products. NADES synthesis as well as the extraction procedures were optimized by Response Surface Methodology. Thus, phenolic determination in these complex samples was achieved by a simple, non-expensive, eco-friendly and robust system. The application to different matrices demonstrated the versatility of the proposed method. NADES opens interesting perspectives for their potential use as vehicles of bioactive compounds as food additives or pharmaceuticals. Copyright © 2017 Elsevier Ltd. All rights reserved.

Enhanced antioxidant activity of polyolefin films integrated with grape tannins.

PubMed

Olejar, Kenneth J; Ray, Sudip; Kilmartin, Paul A

2016-06-01

A natural antioxidant derived from an agro-waste of the wine industry, grape tannin, was incorporated by melt blending into three different polyolefins (high-density polyethylene, linear low-density polyethylene and polypropylene) to introduce antioxidant functionality. Significant antioxidant activity was observed at 1% tannin inclusion in all polymer blends. The antioxidant activity was observed to increase steadily with a greater concentration of grape tannins, the highest increases being seen with polypropylene. The mechanical and thermal properties of the polymer films following antioxidant incorporation were minimally altered with up to 3% grape tannins. All of the polyolefin-grape tannin films successfully passed the leachability test following USP661 standard protocol. Superior antioxidant activity was established in polyolefin thin films by utilization of a bulk grape extract obtained from winery waste. Significant increases in antioxidant activity were seen with 1% extract inclusion. This not only demonstrates the potential for food packaging applications of the polyolefin blends, but also valorizes the agro-waste. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

Effects of enzymatic hydrolysis and ultrasounds pretreatments on corn cob and vine trimming shoots for biogas production.

PubMed

Pérez-Rodríguez, N; García-Bernet, D; Domínguez, J M

2016-12-01

Due to their lignocellulosic nature, corn cob and vine trimming shoots (VTS) could be valorized by anaerobic digestion for biogas production. To enhance the digestibility of substrates, pretreatments of lignocellulosic materials are recommended. The effect of enzymatic hydrolysis, ultrasounds pretreatments (US) and the combination of both was assayed in lignocellulosic composition, methane, and biogas yields. The pretreatments leaded to a reduction in lignin and an increase in neutral detergent soluble compounds making corn cob and VTS more amendable for biogas conversion. The US were negative for biogas production from both substrates and in particular strongly detrimental for VTS. On the opposite side, the enzymatic hydrolysis was certainly beneficial increasing 59.8% and 14.6% the methane production from VTS and corn cob, respectively. The prior application of US did not potentiate (or not sufficiently) the improvement in the methane production reflected by the enzymatic hydrolysis pretreatment of VTS and corn cob. Copyright © 2016 Elsevier Ltd. All rights reserved.

Integrated Biorefining: Coproduction of Renewable Resol Biopolymer for Aqueous Stream Valorization

DOE PAGES

Wilson, A. Nolan; Price, Mariel J.; Mukarakate, Calvin; ...

2017-07-13

Phenol-formaldehyde resins are major material classes that are used in a range of applications including composites, adhesives, foams, electronics, and insulation. While efforts have been made to produce renewable resins, there has yet to be an approach that offers potential for economic viability and meets all critical quality metrics. This failure can be attributed largely to the use of phenol and cresol homologues and to high separation costs. In this work, the use of phenol, cresol, and alkyl phenols derived from the aqueous phase generated from catalytic fast pyrolysis of biomass to produce a high-quality biobased resin is demonstrated. Production,more » through catalytic fast pyrolysis (CFP), separation, through distillation and adsorption unit operations, and synthesis, through typical resol chemistry, produced a resin with properties, such as curing kinetics and molecular weight, competitive with petroleum-derived resin. In conclusion, this work explores a pathway to value-added coproducts from a CFP waste stream, which has the potential to improve the economic viability of biofuels production.« less

Integrated Biorefining: Coproduction of Renewable Resol Biopolymer for Aqueous Stream Valorization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, A. Nolan; Price, Mariel J.; Mukarakate, Calvin

Phenol-formaldehyde resins are major material classes that are used in a range of applications including composites, adhesives, foams, electronics, and insulation. While efforts have been made to produce renewable resins, there has yet to be an approach that offers potential for economic viability and meets all critical quality metrics. This failure can be attributed largely to the use of phenol and cresol homologues and to high separation costs. In this work, the use of phenol, cresol, and alkyl phenols derived from the aqueous phase generated from catalytic fast pyrolysis of biomass to produce a high-quality biobased resin is demonstrated. Production,more » through catalytic fast pyrolysis (CFP), separation, through distillation and adsorption unit operations, and synthesis, through typical resol chemistry, produced a resin with properties, such as curing kinetics and molecular weight, competitive with petroleum-derived resin. In conclusion, this work explores a pathway to value-added coproducts from a CFP waste stream, which has the potential to improve the economic viability of biofuels production.« less

Unique low-molecular-weight lignin with high purity extracted from wood by deep eutectic solvents (DES): a source of lignin for valorization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alvarez-Vasco, Carlos; Ma, Ruoshui; Quintero, Melissa

This paper reports a new method of applying Deep Eutectic Solvents (DES) for extracting lignin from woody biomass with high yield and high purity. DES mixtures prepared from Choline Chloride (ChCl) and four hydrogen-bond donors–acetic acid, lactic acid, levulinic acid and glycerol–were evaluated for treatment of hardwood (poplar) and softwood (D. fir). It was found that these DES treatments can selectively extract a significant amount of lignin from wood with high yields: 78% from poplar and 58% from D. fir. The extracted lignin has high purity (95%) with unique structural properties. We discover that DES can selectively cleave ether linkagesmore » in wood lignin and facilitate lignin removal from wood. The mechanism of DES cleavage of ether bonds between phenylpropane units was investigated. The results from this study demonstrate that DES is a promising solvent for wood delignification and the production of a new source of lignin with promising potential applications.« less

States and challenges for high-value biohythane production from waste biomass by dark fermentation technology.

PubMed

Liu, Zhidan; Zhang, Chong; Lu, Yuan; Wu, Xiao; Wang, Lang; Wang, Linjun; Han, Bing; Xing, Xin-Hui

2013-05-01

Hythane (H2+CH4) has attracted growing attention due to its versatile advantages as, for instance vehicle fuel. Biohythane consisting of biohydrogen and biomethane via two-stage fermentation is a potential high-value solution for the valorization of waste biomass resources and probably an alternative to the fossil based hythane. However, the significance and application potential of biohythane have not yet been fully recognized. This review focuses on the progress of biohydrogen and subsequent biomethane fermentation in terms of substrate, microbial consortium, reactor configuration, as well as the H2/CH4 ratio from the perspective of the feasibility of biohythane production in the past ten years. The current paper also covers how controls of the microbial consortium and bioprocess, system integration influence the biohythane productivity. Challenges and perspectives on biohythane technology will finally be addressed. This review provides a state-of-the-art technological insight into biohythane production by two-stage dark fermentation from biomass. Copyright © 2012 Elsevier Ltd. All rights reserved.

Antioxidant changes of leek (Allium ampeloprasum var. porrum) during spontaneous fermentation of the white shaft and green leaves.

PubMed

Bernaert, Nathalie; Wouters, Dorrit; De Vuyst, Luc; De Paepe, Domien; De Clercq, Hervé; Van Bockstaele, Erik; De Loose, Marc; Van Droogenbroeck, Bart

2013-07-01

Leek is grown for its thickened cylindrical white shaft made up of long leaf bases. Despite the potentially valuable nutritional profile of the green leaves, a large portion remains unused owing its restricted culinary applications. This large quantity of this plant biomass could be valorized given an adequate stabilization method. In this study, we examined leek fermentation with regard to antioxidant changes. The oxygen radical absorbance capacity (ORAC) increased by 62% when the green leaves were fermented for 21 days, while 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity did not increase significantly. Fermentation resulted in an increase of endogenous polyphenolic compounds such as ferulic acid, astragalin, luteolin and naringenin. Moreover, fermentation stimulated the production of a series of polyphenolic compounds that were not present in the fresh leek. The flavour precursors in leek, i.e. methiin and isoalliin, were reduced by 91-93% and 100%, respectively, when spontaneous fermentation was allowed to occur on the white shaft and green leaves. Our results demonstrated that application of fermentation resulted in a higher ORAC value and polyphenol content of the leek plant, especially in the green leaves. These results indicate the nutritional relevance of fermentation, which hold promise as a stabilization technique. © 2013 Society of Chemical Industry.

Studies on chemical constituents and bioactivity of Rosa micrantha: an alternative antioxidants source for food, pharmaceutical, or cosmetic applications.

PubMed

Guimarães, Rafaela; Barros, Lillian; Carvalho, Ana Maria; Ferreira, Isabel C F R

2010-05-26

Rose species have long been used for food and medicinal purposes. Rosa micrantha is one of the rose species that grow feral in the northeastern Portuguese region so-called Nordeste Transmontano. For the first time, chemical composition and bioactivity of their petals, fertilized flowers, unripe, ripening, and overripe hips were evaluated in order to valorize them as sources of important phytochemicals. Chemical characterization included determination of proteins, fats, ash, and carbohydrates, particularly sugars, by HPLC-RI, fatty acids by GC-FID, tocopherols by HPLC-fluorescence, and phenolics, flavonoids, carotenoids, and ascorbic acid by spectrophotometric techniques. Bioactivity was evaluated through screening of antioxidant properties: radical scavenging effects, reducing power, and inhibition of lipid peroxidation. Ripening and overripe hips showed high nutritional value including proteins, carbohydrates, omega-3 and omega-6 fatty acids, energy, sugars, particularly the reducing sugars fructose and glucose, and ascorbic acid (>693 mg/100 g). Fertilized flowers and petals revealed the highest antioxidant activity (EC(50) > 152 microg/mL) and phenolics, flavonoids, and tocopherols contents (>35 mg/100 g). Furthermore, petals, ripening, and overripe hips are important sources of carotenoid pigments (>64 mg/100 g). Because of the diversity and abundance of antioxidants found in this species, some food, cosmetic, and pharmaceutical applications could be explored.

Chapter 17: Adding Value to the Biorefinery with Lignin: An Engineer's Perspective

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biddy, Mary J

There is a long-standing belief that 'you can make anything out of lignin...except money.' This chapter serves to highlight that opportunities for making money from biomass-derived lignin exist both with current technology in the production of steam and power to new emerging areas of R&D focused on value-added chemical and material coproducts from lignin. To understand and quantify the economic potential for lignin valorization, the techno-economic analysis methodology is first described in detail. As demonstrated in the provided case study, these types of economic evaluations serve not only to estimate the economic impacts that lignin conversion could have for anmore » integrated biorefinery and outline drivers for further cost reduction but also identify data gaps and R&D needs for improving the design basis and reducing the risk for process scale-up.« less

Biological upgrading of volatile fatty acids, key intermediates for the valorization of biowaste through dark anaerobic fermentation.

PubMed

Singhania, Reeta Rani; Patel, Anil Kumar; Christophe, Gwendoline; Fontanille, Pierre; Larroche, Christian

2013-10-01

VFAs can be obtained from lignocellulosic agro-industrial wastes, sludge, and various biodegradable organic wastes as key intermediates through dark fermentation processes and synthesized through chemical route also. They are building blocks of several organic compounds viz. alcohol, aldehyde, ketones, esters and olefins. These can serve as alternate carbon source for microbial biolipid, biohydrogen, microbial fuel cells productions, methanisation, and for denitrification. Organic wastes are the substrate for VFA platform that is of zero or even negative cost, giving VFA as intermediate product but their separation from the fermentation broth is still a challenge; however, several separation technologies have been developed, membrane separation being the most suitable one. These aspects will be reviewed and results obtained during anaerobic treatment of slaughterhouse wastes with further utilisation of volatile fatty acids for yeast cultivation have been discussed. Copyright © 2012 Elsevier Ltd. All rights reserved.

Sacrificial limbs of sovereignty: disabled veterans, masculinity, and nationalist politics in Turkey.

PubMed

Açiksöz, Salih Can

2012-03-01

Over the last decade, disabled veterans of the Turkish Army who were injured while fighting against the Partiya Karkerên Kurdistan (PKK; Kurdistan Workers' Party) have become national icons and leading ultranationalist actors. While being valorized as sacrificial heroes in nationalist discourse, they have also confronted socioeconomic marginalization, corporeal otherness, and emasculation anxieties. Against this backdrop, disabled veterans' organizations have become the locus of an ultranationalist campaign against dissident intellectuals. Building on two years of ethnographic research with disabled veterans in Turkey, this article analyzes these processes through the analytical lens of the body. Locating the disabled veteran body at the intersection of state welfare practices, nationalist discourses on heroism and sacrifice, and cultural norms of masculinity and disability, I illustrate how disabled veterans' gendered and classed experiences of disability are hardened into a political identity. Consequently, I show how violence generates new modalities of masculinity and political agency through its corporeal effects.

Laccase pretreatment for agrofood wastes valorization.

PubMed

Giacobbe, Simona; Pezzella, Cinzia; Lettera, Vincenzo; Sannia, Giovanni; Piscitelli, Alessandra

2018-06-01

Apple pomace, potato peels, and coffee silverskin are attractive agrofood wastes for the production of biofuels and chemicals, due to their abundance and carbohydrate content. As lignocellulosic biomasses, their conversion is challenged by the presence of lignin that prevents hydrolysis of polysaccharides, hence demanding a pretreatment step. In this work, the effectiveness of Pleurotus ostreatus laccases (with and without mediator) to remove lignin, improving the subsequent saccharification, was assessed. Optimized conditions for sequential protocol were set up for all agrofood wastes reaching delignification and detoxification yields correlated with high saccharification. Especially noteworthy were results for apple pomace and coffee silverskin for which 83% of and 73% saccharification yields were observed, by using laccase and laccase mediator system, respectively. The herein developed sequential protocol, saving soluble sugars and reducing the amount of wastewater, can improve the overall process for obtaining chemicals or fuels from agrofood wastes. Copyright © 2018 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Phenols recovery after steam explosion of Olive Mill Solid Waste and its influence on a subsequent biomethanization process.

PubMed

Serrano, Antonio; Fermoso, Fernando G; Alonso-Fariñas, Bernabé; Rodríguez-Gutierrez, Guillermo; Fernandez-Bolaños, Juan; Borja, Rafael

2017-11-01

A promising source of high added value compounds is the Olive Mill Solid Waste (OMSW). The aim of this research was to evaluate the viability of a biorefinery approach to valorize OMSW through the combination of steam explosion, phenols extraction, and anaerobic digestion. Steam explosion treatment increased the total phenol content in the steam exploited OMSW, which was twice than that the total phenol content in raw OMSW, although some undesirable compounds were also formed. Phenol extraction allowed the recovery of 2098mg hydroxytyrosol per kg of OMSW. Anaerobic digestion allowed the partial stabilization of the different substrates, although it was not improved by the steam explosion treatment. The economic suitability of the proposed biorefinery approach is favorable up to a phenol extract price 90.7% lower than the referenced actual price of 520€/kg. Copyright © 2017 Elsevier Ltd. All rights reserved.

SOCIAL ROLE VALORIZATION IN COMMUNITY MENTAL HEALTH HOUSING: DOES IT CONTRIBUTE TO THE COMMUNITY INTEGRATION AND LIFE SATISFACTION OF PEOPLE WITH PSYCHIATRIC DISABILITIES?

PubMed Central

Aubry, Tim; Flynn, Robert J; Virley, Barb; Neri, Jaclynne

2013-01-01

Despite its importance as a theory in the development of programs for populations with disabilities, social role valorization (SRV) has received relatively little attention in community mental health research. We present findings of a study that examined the relationship of housing-related SRV to community integration and global life satisfaction of persons with psychiatric disabilities. The housing environments and associated supports of a group of 73 persons with psychiatric disabilities living in a mid-sized city were assessed using the PASSING rating system on the extent that their housing environments facilitated SRV. In addition, in-person interviews were conducted to determine the levels of physical integration, psychological integration, social integration, and life satisfaction of study participants. Results showed SRV contributing directly to all three types of community integration. Psychological integration was found to mediate the relationship between SRV and life satisfaction. Implications of the findings are discussed. © 2013 Wiley Periodicals, Inc. PMID:23658470

Biodegradation of kraft lignin by newly isolated Klebsiella pneumoniae, Pseudomonas putida, and Ochrobactrum tritici strains.

PubMed

Xu, Zhaoxian; Qin, Ling; Cai, Mufeng; Hua, Wenbo; Jin, Mingjie

2018-05-01

Bacterial systems have drawn an increasing amount of attention on lignin valorization due to their rapid growth and powerful environmental adaptability. In this study, Klebsiella pneumoniae NX-1, Pseudomonas putida NX-1, and Ochrobactrum tritici NX-1 with ligninolytic potential were isolated from leaf mold samples. Their ligninolytic capabilities were determined by measuring (1) the cell growth on kraft lignin as the sole carbon source, (2) the decolorization of kraft lignin and lignin-mimicking dyes, (3) the micro-morphology changes and transformations of chemical groups in kraft lignin, and (4) the ligninolytic enzyme activities of these three isolates. To the best of our knowledge, this is the first report that Ochrobactrum tritici species can depolymerize and metabolize lignin. Moreover, laccase, lignin peroxidase, and Mn-peroxidase showed high activities in P. putida NX-1. Due to their excellent ligninolytic capabilities, these three bacteria are important supplements to ligninolytic bacteria library and could be valuable in lignin valorization.

Lignin-Derived Thioacidolysis Dimers: Reevaluation, New Products, Authentication, and Quantification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yue, Fengxia; Lu, Fachuang; Regner, Matt

2017-01-26

Lignin structural studies play an essential role both in understanding the development of plant cell walls and for valorizing lignocellulosics as renewable biomaterials. Dimeric products released by selectively cleaving β–aryl ether linkages between lignin units reflect the distribution of recalcitrant lignin units, but have been neither absolutely defined nor quantitatively determined. Here in this work, 12 guaiacyl-type thioacidolysis dimers were identified and quantified using newly synthesized standards. One product previously attributed to deriving from β–1-coupled units was established as resulting from β–5 units, correcting an analytical quandary. Another longstanding dilemma, that no β–β dimers were recognized in thioacidolysis products frommore » gymnosperms, was resolved with the discovery of two such authenticated compounds. Finally, individual GC response factors for each standard compound allowed rigorous quantification of dimeric products released from softwood lignins, affording insight into the various interunit-linkage distributions in lignins and thereby guiding the valorization of lignocellulosics.« less

The environmental sustainability of anaerobic digestion as a biomass valorization technology.

PubMed

De Meester, Steven; Demeyer, Jens; Velghe, Filip; Peene, Andy; Van Langenhove, Herman; Dewulf, Jo

2012-10-01

This paper studies the environmental sustainability of anaerobic digestion from three perspectives. First, reference electricity is compared to electricity production from domestic organic waste and energy crop digestion. Second, different digester feed possibilities in an agricultural context are studied. Third, the influence of applying digestate as fertilizer is investigated. Results highlight that biomass is converted at a rational exergy (energy) efficiency ranging from 15.3% (22.6) to 33.3% (36.0). From a life cycle perspective, a saving of over 90% resources is achieved in most categories when comparing biobased electricity to conventional electricity. However, operation without heat valorization results in 32% loss of this performance while using organic waste (domestic and agricultural residues) as feedstock avoids land resources. The use of digestate as a fertilizer is beneficial from a resource perspective, but causes increased nitrogen and methane emissions, which can be reduced by 50%, making anaerobic digestion an environmentally competitive bioenergy technology. Copyright © 2012 Elsevier Ltd. All rights reserved.

Deep eutectic solvent-based valorization of spent coffee grounds.

PubMed

Yoo, Da Eun; Jeong, Kyung Min; Han, Se Young; Kim, Eun Mi; Jin, Yan; Lee, Jeongmi

2018-07-30

Spent coffee grounds (SCGs) are viewed as a valuable resource for useful bioactive compounds, such as chlorogenic acids and flavonoids, and we suggest an eco-friendly and efficient valorization method. A series of choline chloride-based deep eutectic solvents (DESs) were tested as green extraction solvents for use with ultrasound-assisted extraction. Extraction efficiency was evaluated based on total phenolic content (TPC), total flavonoid content, total chlorogenic acids, and/or anti-oxidant activity. A binary DES named HC-6, which was composed of 1,6-hexanediol:choline chloride (molar ratio 7:1) was designed to produce the highest efficiency. Experimental conditions were screened and optimized for maximized efficiency using a two-level fractional factorial design and a central composite design, respectively. As a result, the proposed method presented significantly enhanced TPC and anti-oxidant activity. In addition, phenolic compounds could be easily recovered from extracts at high recovery yields (>90%) by adsorption chromatography. Copyright © 2018 Elsevier Ltd. All rights reserved.

Fed-batch anaerobic valorization of slaughterhouse by-products with mesophilic microbial consortia without methane production.

PubMed

Pessiot, J; Nouaille, R; Jobard, M; Singhania, R R; Bournilhas, A; Christophe, G; Fontanille, P; Peyret, P; Fonty, G; Larroche, C

2012-07-01

This work aimed at setting up a fully instrumented, laboratory-scale bioreactor enabling anaerobic valorization of solid substrates through hydrogen and/or volatile fatty acid (VFA) production using mixed microbial populations (consortia). The substrate used was made of meat-based wastes, especially from slaughterhouses, which are becoming available in large amounts as a consequence of the growing constraints for waste disposal from meat industry. A reconstituted microbial mesophilic consortium without Archaebacteria (methanogens), named PBr, was cultivated in a 5-L anaerobic bioreactor on slaughterhouse wastes. The experiments were carried out with sequential fed-batch operations, including liquid medium removal from the bioreactor and addition of fresh substrate. VFAs and nitrogen were the main metabolites observed, while hydrogen accumulation was very low and no methane production was evidenced. After 1,300 h of culture, yields obtained for VFAs reached 0.38 g/g dry matter. Strain composition of the microbial consortium was also characterized using molecular tools (temporal temperature gradient gel electrophoresis and gene sequencing).

Lignin-Derived Thioacidolysis Dimers: Reevaluation, New Products, Authentication, and Quantification.

PubMed

Yue, Fengxia; Lu, Fachuang; Regner, Matt; Sun, Runcang; Ralph, John

2017-03-09

Lignin structural studies play an essential role both in understanding the development of plant cell walls and for valorizing lignocellulosics as renewable biomaterials. Dimeric products released by selectively cleaving β-aryl ether linkages between lignin units reflect the distribution of recalcitrant lignin units, but have been neither absolutely defined nor quantitatively determined. Here, 12 guaiacyl-type thioacidolysis dimers were identified and quantified using newly synthesized standards. One product previously attributed to deriving from β-1-coupled units was established as resulting from β-5 units, correcting an analytical quandary. Another longstanding dilemma, that no β-β dimers were recognized in thioacidolysis products from gymnosperms, was resolved with the discovery of two such authenticated compounds. Individual GC response factors for each standard compound allowed rigorous quantification of dimeric products released from softwood lignins, affording insight into the various interunit-linkage distributions in lignins and thereby guiding the valorization of lignocellulosics. © 2015 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

Savior siblings, parenting and the moral valorization of children.

PubMed

Strong, Kimberly; Kerridge, Ian; Little, Miles

2014-05-01

Philosophy has long been concerned with 'moral status'. Discussions about the moral status of children, however, seem often to promote confusion rather than clarity. Using the creation of 'savior siblings' as an example, this paper provides a philosophical critique of the moral status of children and the moral relevance of parenting and the role that formative experience, regret and relational autonomy play in parental decisions. We suggest that parents make moral decisions that are guided by the moral significance they attach to children, to sick children and most importantly, to a specific sick child (theirs). This moral valorization is rarely made explicit and has generally been ignored by both philosophers and clinicians in previous critiques. Recognizing this, however, may transform not only the focus of bioethical discourse but also the policies and practices surrounding the care of children requiring bone marrow or cord blood transplantation by better understanding the values at stake behind parental decision making. © 2012 John Wiley & Sons Ltd.

Valorization of Rhizoclonium sp. algae via pyrolysis and catalytic pyrolysis.

PubMed

Casoni, Andrés I; Zunino, Josefina; Piccolo, María C; Volpe, María A

2016-09-01

The valorization of Rhizoclonium sp. algae through pyrolysis for obtaining bio-oils is studied in this work. The reaction is carried out at 400°C, at high contact time. The bio-oil has a practical yield of 35% and is rich in phytol. Besides, it is simpler than the corresponding to lignocellulosic biomass due to the absence of phenolic compounds. This property leads to a bio-oil relatively stable to storage. In addition, heterogeneous catalysts (Al-Fe/MCM-41, SBA-15 and Cu/SBA-15), in contact with algae during pyrolysis, are analyzed. The general trend is that the catalysts decrease the concentration of fatty alcohols and other high molecular weight products, since their mild acidity sites promote degradation reactions. Thus, the amount of light products increases upon the use of the catalysts. Particularly, acetol concentration in the bio-oils obtained from the catalytic pyrolysis with SBA-15 and Cu/SBA-15 is notably high. Copyright © 2016 Elsevier Ltd. All rights reserved.

Compositional insights and valorization pathways for carbonaceous material deposited during bio-oil thermal treatment.

PubMed

Ochoa, Aitor; Aramburu, Borja; Ibáñez, María; Valle, Beatriz; Bilbao, Javier; Gayubo, Ana G; Castaño, Pedro

2014-09-01

This work analyses the composition, morphology, and thermal behavior of the carbonaceous materials deposited during the thermal treatment of bio-oil (thermal pyrolytic lignin-TPL). The bio-oil was obtained by flash pyrolysis of lignocellulosic biomass (pine sawdust), and the TPLs were obtained in the 400-700 °C range. The TPLs were characterized by performing elemental analysis; (13)C NMR, Raman, FTIR, and X-ray photoelectron spectroscopy; SEM; and temperature-programmed oxidation analyzed by differential thermogravimetry and differential scanning calorimetry. The results are compared to a commercial lignin (CL). The TPLs have lower oxygen and hydrogen contents and a greater aromaticity and structural order than the CL material. Based on these features, different valorization routes are proposed: the TPL obtained at 500 °C is suitable for use as a fuel, and the TPL obtained at 700 °C has a suitable morphology and composition for use as an adsorbent or catalyst support. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Micro-scale energy valorization of grape marcs in winery production plants.

PubMed

Fabbri, Andrea; Bonifazi, Giuseppe; Serranti, Silvia

2015-02-01

The Biochemical Methane Potential (BMP) of winery organic waste, with reference to two Italian red and white grapes (i.e. Nero Buono and Greco) by-products was investigated. The study was carried out to verify the possibility to reduce the production impact in a green-waste-management-chain-perspective. The possibility to efficiently utilize wine-related-by-products for energy production at a micro-scale (i.e. small-medium scale winery production plant) was also verified. Results showed as a good correlation can be established between the percentage of COD removal and the biogas production, as the winery can produce, from its waste methanization, about 7800 kW h year(-1) electrical and 8900 kW h year(-1) thermal. A critical evaluation was performed about the possibility to utilize the proposed approach to realize an optimal biomass waste management and an energetic valorization in a local-energy-production-perspective. Copyright © 2014 Elsevier Ltd. All rights reserved.

[Professor Emile Perrot: seven years of active collaboration with the journal La Quinzaine coloniale (1907-1914)].

PubMed

Bonnemain, Bruno

2009-02-01

E. Perrot, at that time young professor of Pharmacy in Paris, realizes in 1907 the interest of the valorization of the french colonial empire. He is then part, during 7 years, of the authors for the journal "La Quinzaine coloniale" where he is among the ones that publish in a new section related to scientific and technical publications with the objective to emphatize colonial ressources. Perrot approaches many subjects from rubber to medicinal herbs (especially quinquina) as well as babanas and botanic gardens. In doing it, it is an opportunity for Perrot to give some ideas on how to improve the valorization of french colonies, ideas that will be at least partially applied after the 1st World War when he became vice-president of the "Comité Interministeriel des Plantes Médicinales" created in 1918. The 300 articles that was published at the time by Perrot is an opportunity to better assess the role of E. Perrot later on, during the period 1918-1939.

Leveraging Existing Heritage Documentation for Animations: Senate Virtual Tour

NASA Astrophysics Data System (ADS)

Dhanda, A.; Fai, S.; Graham, K.; Walczak, G.

2017-08-01

The use of digital documentation techniques has led to an increase in opportunities for using documentation data for valorization purposes, in addition to technical purposes. Likewise, building information models (BIMs) made from these data sets hold valuable information that can be as effective for public education as it is for rehabilitation. A BIM can reveal the elements of a building, as well as the different stages of a building over time. Valorizing this information increases the possibility for public engagement and interest in a heritage place. Digital data sets were leveraged by the Carleton Immersive Media Studio (CIMS) for parts of a virtual tour of the Senate of Canada. For the tour, workflows involving four different programs were explored to determine an efficient and effective way to leverage the existing documentation data to create informative and visually enticing animations for public dissemination: Autodesk Revit, Enscape, Autodesk 3ds Max, and Bentley Pointools. The explored workflows involve animations of point clouds, BIMs, and a combination of the two.

Neuroscience Evidence for Economic Humanism in Management Science: Organizational Implications and Strategy.

PubMed

Lattanzi, Nicola; Menicagli, Dario; Dal Maso, Lorenzo

2016-04-01

Globalization phenomena and Information Communication Technology (ICT) are producing deep changes worldwide. The economic environment and society where firms both cooperate and compete with each other are rapidly changing leading firms towards recognizing the role of intangible resources as a source of fresh competitive advantage. Experience, innovation and the ability to create new knowledge completely arise from the act of human resources inviting firms to focus on how to generate and shape knowledge. Therefore, the future of firms depends greatly on how managers are able to explore and exploit human resources. However, without a clear understanding of the nature of human beings and the complexity behind human interactions, we cannot understand the theory of organizational knowledge creation. Thus, how can firms discover, manage and valorize this "human advantage"? Neuroscience can increase the understanding of how cognitive and emotional processes work; in doing so, we may be able to better understand how individuals involved in a business organization make decisions and how external factors influence their behavior, especially in terms of commitment activation and engagement level. In this respect, a neuroscientific approach to business can support managers in decision-making processes. In a scenario where economic humanism plays a central role in the process of fostering firms' competitiveness and emerging strategies, we believe that a neuroscience approach in a business organization could be a valid source of value and inspiration for manager decision-making processes.

Outlining a selection procedure for Saccharomyces cerevisiae isolated from grape marc to improve fermentation process and distillate quality.

PubMed

Bovo, Barbara; Carlot, Milena; Fontana, Federico; Lombardi, Angiolella; Soligo, Stefano; Giacomini, Alessio; Corich, Viviana

2015-04-01

Nowadays grape marc represents one of the main by-product of winemaking. Many South Europe countries valorize this ligno-cellulosic waste through fermentation and distillation for industrial alcoholic beverage production. The storage of marcs is a crucial phase in the distillation process, due to the physicochemical transformations ascribed to microbial activity. Among the methods adopted by distillers to improve the quality of spirits, the use of selected yeasts has not been explored so far, therefore in this work we evaluated the selection criteria of Saccharomyces cerevisiae strains for grape marc fermentation. The proposed selection procedure included three steps: characterization of phenotypical traits, evaluation of selected strains on pasteurised grape marc at lab-scale (100 g) and pilot-scale fermentation (350 kg). This selection process was applied on 104 strains isolated from grape marcs of different origins and technological treatment. Among physiological traits, β-glucosidase activity level as quality trait seems to be only partially involved in increasing varietal flavour. More effective in describing yeast impact on distillate quality is the ratio higher alcohols/esters that indicates strain ability to increase positive flavours. Finally, evaluating grape marc as source of selected yeasts, industrial treatment rather than varietal origin seems to shape strain technological and quality traits. Copyright © 2014 Elsevier Ltd. All rights reserved.

A new process for nickel ammonium disulfate production from ash of the hyperaccumulating plant Alyssum murale.

PubMed

Barbaroux, R; Plasari, E; Mercier, G; Simonnot, M O; Morel, J L; Blais, J F

2012-04-15

The extraction of nickel (Ni) from ultramafic soils by phytomining can be achieved using Alyssum murale cultures. This study presents a new process for the valorization of Ni accumulated by this plant through the production of a Ni ammonium disulfate salt (Ni(NH(4))(2)(SO(4))(2).6H(2)O). The process comprises an initial leaching of the ashes of A. murale with a sulphuric acid solution (1.9 M H(2)SO(4), T=95 °C, t=240 min, TS=150 g ash L(-1)), producing a leachate rich in Ni (10.2 g Ni L(-1); 96% Ni solubilisation), Mg, P, K, Fe, Ca and Al. The pH of the acid leachate is increased to 5.0 with NaOH (5M), followed by an evaporation step which produced a purified solution rich in Ni (21.3 g NiL(-1)) and an iron hydroxide precipitate. The cold crystallization (T=2 °C, t=6h) of this solution by the stoichiometric addition (× 1.2) of ammonium sulfate generates a Ni ammonium disulfate salt, containing 13.2% Ni, that is potentially valuable to industry. Copyright © 2012 Elsevier B.V. All rights reserved.

Monitoring of stainless-steel slag carbonation using X-ray computed microtomography.

PubMed

Boone, Marijn A; Nielsen, Peter; De Kock, Tim; Boone, Matthieu N; Quaghebeur, Mieke; Cnudde, Veerle

2014-01-01

Steel production is one of the largest contributors to industrial CO2 emissions. This industry also generates large amounts of solid byproducts, such as slag and sludge. In this study, fine grained stainless-steel slag (SSS) is valorized to produce compacts with high compressive strength without the use of a hydraulic binder. This carbonation process is investigated on a pore-scale level to identify how the mineral phases in the SSS react with CO2, where carbonates are formed, and what the impact of these changes is on the pore network of the carbonated SSS compact. In addition to conventional research techniques, high-resolution X-ray computed tomography (HRXCT) is applied to visualize and quantify the changes in situ during the carbonation process. The results show that carbonates mainly precipitate at grain contacts and in capillary pores and this precipitation has little effect on the connectivity of the pore space. This paper also demonstrates the use of a custom-designed polymer reaction cell that allows in situ HRXCT analysis of the carbonation process. This shows the distribution and influence of water and CO2 in the pore network on the carbonate precipitation and, thus, the influence on the compressive strength development of the waste material.

Schooled Mathematics and Cultural Knowledge.

ERIC Educational Resources Information Center

de Abreu, Guida; Cline, Tony

2003-01-01

Asserts that recognition of the cultural nature of schooled mathematics requires research that locates these practices in the sociopolitical context and provides an account of the social valorization of mathematical practices and the impact on learning. Using data on students in multiethnic English elementary schools, the article proposes how the…

The Marine Corps Schools: Driving Institutional Change Towards the Second World War

DTIC Science & Technology

2014-05-22

Corps became identified and legitimated externally in the broader society as small war specialists. As American commercial and missionary interest...Soissons, St. Mihiel, Blanc Mont Ridge , and the Muese-Argonne were reflections of both professional steadiness and personal valor. The press reports

Normalization vs. Social Role Valorization: Similar or Different?

ERIC Educational Resources Information Center

Kumar, Akhilesh; Singh, Rajani Ranjan; Thressiakutty, A. T.

2015-01-01

The radical changes towards services for persons with disabilities were brought by Principle of Normalization, originated in 1969. As a consequence of Normalization, disability as a whole, and intellectual disability in particular, received the attention of the masses and the intelligentsia began advocating normalization ideologies which became…

Philosophy Because the World Matters

ERIC Educational Resources Information Center

Reeve, Hester

2017-01-01

"Philosophy Because the World Matters" promotes a valorization of philosophy as a practice able to activate an individual's relationship making to "having a life" and, in turn, to allow the unfolding self-illumination (qua onto-ethical capacity) to effect a constructive world-thinking and hence world-building with others. These…

Stolen Valor Act of 2013

THOMAS, 113th Congress

Sen. Heller, Dean [R-NV

2013-02-04

Senate - 02/04/2013 Read twice and referred to the Committee on the Judiciary. (All Actions) Notes: For further action, see H.R.258, which became Public Law 113-12 on 6/3/2013. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Capitalism, Academic Style, and Shared Governance

ERIC Educational Resources Information Center

Rhoades, Gary

2005-01-01

In "Academic Capitalism and the New Economy," the author, and her colleague, Sheila Slaughter, describe a cultural system that valorizes higher education's dual economic roles: generating revenue for academic institutions and producing knowledge and wealth to boost the global competitiveness of corporations. This system depends on a mode of…

Tiene Arte Valor Afuera Del Barrio: The Murals of East Los Angeles and Boyle Heights

ERIC Educational Resources Information Center

Holscher, Louis M.

1976-01-01

Discusses the themes of the murals and explores the possible uses that the murals in Los Angeles have for the outsider, the non-Chicano, for those who have only a little understanding or awareness of the Chicano community. (Author/AM)

Alkaline Peroxide Delignification of Corn Stover

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mittal, Ashutosh; Katahira, Rui; Donohoe, Bryon S.

Selective biomass fractionation into carbohydrates and lignin is a key challenge in the conversion of lignocellulosic biomass to fuels and chemicals. In the present study, alkaline hydrogen peroxide (AHP) pretreatment was investigated to fractionate lignin from polysaccharides in corn stover (CS), with a particular emphasis on the fate of the lignin for subsequent valorization. The influence of peroxide loading on delignification during AHP pretreatment was examined over the range of 30-500 mg H2O2/g dry CS at 50 degrees C for 3 h. Mass balances were conducted on the solid and liquid fractions generated after pretreatment for each of the threemore » primary components, lignin, hemicellulose, and cellulose. AHP pretreatment at 250 mg H2O2/g dry CS resulted in the pretreated solids with more than 80% delignification consequently enriching the carbohydrate fraction to >90%. Two-dimensional nuclear magnetic resonance (2D-NMR) spectroscopy of the AHP pretreated residue shows that, under high peroxide loadings (>250 mg H2O2/g dry CS), most of the side chain structures were oxidized and the aryl-ether bonds in lignin were partially cleaved, resulting in significant delignification of the pretreated residues. Gel permeation chromatography (GPC) analysis shows that AHP pretreatment effectively depolymerizes CS lignin into low molecular weight (LMW) lignin fragments in the aqueous fraction. Imaging of AHP pretreated residues shows a more granular texture and a clear lamellar pattern in secondary walls, indicative of layers of varying lignin removal or relocalization. Enzymatic hydrolysis of this pretreated residue at 20 mg/g of glucan resulted in 90% and 80% yields of glucose and xylose, respectively, after 120 h. Overall, AHP pretreatment is able to selectively remove more than 80% of the lignin from biomass in a form that has potential for downstream valorization processes and enriches the solid pulp into a highly digestible material.« less

Oh to Be Rid of Administrative Wimps!

ERIC Educational Resources Information Center

Weissberg, Robert

2007-01-01

Contemporary university administrators are usually wimps, and timidity in facing easily enraged campus radicals only invites outrageous demands which, in turn, subvert intellectual life. This must be changed. For much of human history leaders had to display physical valor and this trait should be restored to the college administrator job…

Space and Language Learning under the Neoliberal Economy

ERIC Educational Resources Information Center

Gao, Shaung; Park, Joseph Sung-Yul

2015-01-01

Neoliberalism, as an ideology that valorizes and institutionalizes market-based freedom and individual entrepreneurship, derives from the logic of highly advanced capitalism, and thus must be understood in relation to the material conditions of our capitalist economy. One such material condition is space. However, the intersection of space and…

Middle-Class Mothers on Urban School Selection in Gentrifying Areas

ERIC Educational Resources Information Center

Roberts, Amy; Lakes, Richard D.

2016-01-01

This study examined middle-class mothers' engagement in urban school selection as residents of two gentrifying neighborhoods in Atlanta, Georgia. Gentrifiers levy social capital when activating or exercising agency and create social networks that valorize child-rearing concerns through exchange of information. Thirty mothers with children under…

Valorization of guayule as a feedstock for lignocellulosic biorefineries using ammonia fiber expansion (AFEX) pretreatment

USDA-ARS?s Scientific Manuscript database

Natural rubber latex extraction from guayule leaves behind greater than 80% (by weight) of agricultural residue as a feedstock suitable for conversion to biofuels via a thermochemical or biochemical route. Untreated guayule shrub and bagasse (after latex extraction) has shown to be very recalcitrant...

The Glass Ceiling for Remotely Piloted Aircraft

DTIC Science & Technology

2013-08-01

who by valorous ways become princes , like these men, acquire a prin- cipality with difficulty, but they keep it with ease. —Niccolò Machiavelli , 1513...Though written 500 years ago, Machiavelli’s The Prince remains a seminal treatise on the art of acquiring and maintaining politi-cal power. The book

Watching as Working: The Valorization of Audience Consciousness.

ERIC Educational Resources Information Center

Jhally, Sut; Livant, Bill

1986-01-01

Explores the argument that television exemplifies the production and reflection of surplus value and that watching, as an activity, reflects the organization of human labor in the economy as a whole. Develops the basis for a materialist theory of the advertising-supported media industries in advanced industrial societies. (JD)

Faculties of Education and Institutional Strategies for Knowledge Mobilization: An Exploratory Study

ERIC Educational Resources Information Center

Sa, Creso M.; Li, Sharon X.; Faubert, Brenton

2011-01-01

The goal to enhance the impacts of academic research in the "real world" resonates with progressive visions of the role of universities in society, and finds support among policy makers who have sought to enhance the "transfer", "translation", "uptake", or "valorization" of research knowledge in…

Cosmic Sense, Sensibility, and Written Expression: From Childhood to Adolescence.

ERIC Educational Resources Information Center

Kahn, David

2001-01-01

Compares and connects the cosmic awareness emerging in the elementary classroom to adolescent cosmic sensibility embedded in the experience of the Hershey Montessori Farm School. Provides examples of students' poetry to support Montessori's concept of valorization of personality as each individual turns toward maturity. (Author/TJQ)

HOSPITALIZATIONS FOR CHOLECYSTITIS AND CHOLELITHIASIS IN THE STATE OF RIO GRANDE DO SUL, BRAZIL.

PubMed

Nunes, Emeline Caldana; Rosa, Roger Dos Santos; Bordin, Ronaldo

2016-01-01

The cholelithiasis is disease of surgical resolution with about 60,000 hospitalizations per year in the Sistema Único de Saúde (SUS - Brazilian National Health System) of the Rio Grande do Sul state. To describe the profile of hospitalizations for cholecystitis and cholelithiasis performed by the SUS of Rio Grande do Sul state, 2011-2013. Hospital Information System data from the National Health System through morbidity list for cholelithiasis and cholecystitis (ICD-10 K80-K81). Variables studied were sex, age, number of hospitalizations and approved Hospitalization Authorizations (AIH), total amount and value of hospital services generated, days and average length of stay, mortality, mortality and case fatality ratio, from health regions of the Rio Grande do Sul. During 2011-2013 there were 60,517 hospitalizations for cholecystitis and cholelithiasis, representing 18.86 hospitalizations per 10,000 inhabitants/year, most often in the age group from 60 to 69 years (41.34 admissions per 10,000 inhabitants/year) and female (27.72 hospitalizations per 10,000 inhabitants/year). The fatality rate presented an inverse characteristic: 13.52 deaths per 1,000 admissions/year for males, compared with 7.12 deaths per 1,000 admissions/year in females. The state had an average total amount spent and value of hospital services of R$ 16,244,050.60 and R$ 10,890,461.31, respectively. The health region "Capital/Gravataí Valley" exhibit the highest total expenditure and hospital services, and the largest number of deaths, and average length of stay. The hospitalization and lethality coefficients, the deaths, the length of stay and spending related to admissions increased from 50 years old. Females had a higher frequency and higher values ​​spent on hospitalization, while the male higher coefficient of mortality and mean hospital stay. A colelitíase é doença de resolução cirúrgica com cerca de 60.000 internações por ano no Sistema Único de Saúde no estado do Rio Grande do Sul. Descrever o perfil das internações por colecistite e colelitíase na rede pública do estado no triênio 2011-2013. Emprego de dados do Sistema de Informações Hospitalares do Sistema Único de Saúde, através da lista de morbidades para colelitíase e colecistite (CID-10 K80-K81). As variáveis estudadas foram: sexo, idade, número de internações e de Autorizações de Internação Hospitalar aprovadas, valor total e valor dos serviços hospitalares gerados, dias e média de permanência, óbitos, coeficiente de mortalidade e letalidade, a partir das regiões de saúde do estado. No triênio ocorreram 60.517 internações por colecistite e colelitíase, o que representou 18,86 internações por 10.000 habitantes/ano, mais frequente na faixa etária dos 60 aos 69 anos (41,34 internações por 10.000 habitantes/ano) e no sexo feminino (27,72 hospitalizações por 10.000 habitantes/ano). O coeficiente de letalidade apresentou característica inversa: 13,52 óbitos para 1.000 internações/ano para o sexo masculino, contra 7,12 óbitos para 1.000 internações/ano no sexo feminino. O estado apresentou médias de valor total gasto e de valor dos serviços hospitalares de R$16.244.050,60 e R$10.890.461,31, respectivamente. A região de saúde "Capital/Vale do Gravataí" apresentou o maior valor total gasto e de serviços hospitalares, e o maior número de óbitos, média e dias de permanência. Os coeficientes de internação e de letalidade, os óbitos, os dias de permanência e os gastos referentes às internações aumentam a partir dos 50 anos de idade. O sexo feminino apresentou maior frequência e maiores valores gastos com a internação, enquanto o masculino maior coeficiente de letalidade e média de permanência hospitalar.

A Review on the Valorization of Macroalgal Wastes for Biomethane Production

PubMed Central

Barbot, Yann Nicolas; Al-Ghaili, Hashem; Benz, Roland

2016-01-01

The increased use of terrestrial crops for biofuel production and the associated environmental, social and ethical issues have led to a search for alternative biomass materials. Terrestrial crops offer excellent biogas recovery, but compete directly with food production, requiring farmland, fresh water and fertilizers. Using marine macroalgae for the production of biogas circumvents these problems. Their potential lies in their chemical composition, their global abundance and knowledge of their growth requirements and occurrence patterns. Such a biomass industry should focus on the use of residual and waste biomass to avoid competition with the biomass requirements of the seaweed food industry, which has occurred in the case of terrestrial biomass. Overabundant seaweeds represent unutilized biomass in shallow water, beach and coastal areas. These eutrophication processes damage marine ecosystems and impair local tourism; this biomass could serve as biogas feedstock material. Residues from biomass processing in the seaweed industry are also of interest. This is a rapidly growing industry with algae now used in the comestible, pharmaceutical and cosmetic sectors. The simultaneous production of combustible biomethane and disposal of undesirable biomass in a synergistic waste management system is a concept with environmental and resource-conserving advantages. PMID:27338422

Potential effects of sulforaphane to fight obesity.

PubMed

Martins, Tânia; Colaço, Bruno; Venâncio, Carlos; Pires, Maria J; Oliveira, Paula A; Rosa, Eduardo; Antunes, Luís M

2018-06-01

Obesity is linked to the onset of many diseases such as diabetes mellitus, cardiovascular diseases and cancer, among others. The prevalence of obesity nearly doubled worldwide between 1980 and 2014. Simultaneously, in the last decade, the effects of sulforaphane as a potential treatment for obesity have been investigated, with promising results. Fruits and vegetables and their processed agri-food co-products are good sources of natural health-promoting compounds. Brassica crops are among the most produced crops in the world and are a good source of glucoraphanin, which, following hydrolysis, releases sulforaphane. The Brassicaceae family generates large amounts of co-products with no intended use, causing negative economic and environmental impact. Valorization of these co-products could be achieved through their exploitation for the extraction of bioactive compounds such as sulforaphane. However, the extraction process still needs further improvement for its economic feasibility. This article reviews the potential effects of sulforaphane in the treatment of obesity, linked to the relevance of giving Brassica co-products added value, which is of key importance for the competitiveness of farmers and the agri-food industry. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

Presence of Siloxanes in the Biogas of a Wastewater Treatment Plant Separation in Condensates and Influence of the Dose of Iron Chloride on its Elimination

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mariano, García; Daniel, Prats; Arturo, Trapote, E-mail: atj@ua.es

2015-12-21

The siloxanes present in the biogas produced during anaerobic digestion damage the mechanism of cogeneration equipment and, consequently, negatively affect the energy valorization process. For this reason, the detection and elimination of these silicon-derived chemical compounds are a priority in the management of cogeneration facilities. In this regard, the objectives of this paper are, firstly, to characterize the siloxanes in the biogas and, secondly, to qualitatively evaluate the influence of the dose of iron chloride on its elimination. The research was performed at the Rincón de León Wastewater Treatment Plant (Alicante, Spain). The outflow biogas of the digesters and ofmore » the pressurized gasometers was sampled and analyzed. The results obtained made it possible to demonstrate, firstly, the absence of linear siloxanes and that, of the cyclic siloxanes, the predominant type was decamethylcyclopentasiloxane, and, secondly, that the addition of iron chloride in the digesters significantly reduces the siloxane content in the biogas. Additionally, it was demonstrated that the process of compression of the biogas, with the elimination of condensates, also produces significant reductions in the concentration of siloxanes in the biogas.« less

A Review on the Valorization of Macroalgal Wastes for Biomethane Production.

PubMed

Barbot, Yann Nicolas; Al-Ghaili, Hashem; Benz, Roland

2016-06-21

The increased use of terrestrial crops for biofuel production and the associated environmental, social and ethical issues have led to a search for alternative biomass materials. Terrestrial crops offer excellent biogas recovery, but compete directly with food production, requiring farmland, fresh water and fertilizers. Using marine macroalgae for the production of biogas circumvents these problems. Their potential lies in their chemical composition, their global abundance and knowledge of their growth requirements and occurrence patterns. Such a biomass industry should focus on the use of residual and waste biomass to avoid competition with the biomass requirements of the seaweed food industry, which has occurred in the case of terrestrial biomass. Overabundant seaweeds represent unutilized biomass in shallow water, beach and coastal areas. These eutrophication processes damage marine ecosystems and impair local tourism; this biomass could serve as biogas feedstock material. Residues from biomass processing in the seaweed industry are also of interest. This is a rapidly growing industry with algae now used in the comestible, pharmaceutical and cosmetic sectors. The simultaneous production of combustible biomethane and disposal of undesirable biomass in a synergistic waste management system is a concept with environmental and resource-conserving advantages.

Contribution to the production of lactulose-rich whey by in situ electro-isomerization of lactose and effect on whey proteins after electro-activation as confirmed by matrix-assisted laser desorption/ionization time-of-flight-mass spectrometry and sodium dodecyl sulfate-polyacrylamide gel electrophoresis.

PubMed

Kareb, Ourdia; Champagne, Claude P; Aïder, Mohammed

2016-04-01

Cheese-whey, a major co-product of the dairy industry, has recently been the subject of many technological applications. We studied the bioconversion of whey into valuable bio-products such as a potential lactulose prebiotic and compounds with antioxidant properties. This paper examines efficiency, safety, and economics of electro-activation as an eco-friendly technology for a maximum valorization of whey. Thus, a bottom-up approach was therefore addressed. The effect of 4 experimental parameters--low working temperatures (0, 10, and 25 °C), current intensities (400, 600, and 800 mA), volume conditions (100, 200, and 300 mL), and feed concentrations [7, 14, and 28% (wt/vol)]--on lactose-whey isomerization to lactulose under electro-activation process were studied. Structural characteristics of whey proteins and antioxidant functionality were also investigated. The results showed a compromise to be reached between both parameters. Therefore, the maximum yield of 35% of lactulose was achieved after 40 min of reaction at the working temperature of 10 °C under 400 mA electric current field and 100-mL volume conditions with using feed solution at 7% (wt/vol). The isomerization of lactose to lactulose is accomplished by subsequent degradation to galactose, but only at a very small amount. Additionally, whey electro-activation showed significantly elevated antioxidant capacity compared with the untreated samples. The enhancement of antioxidant functionality of whey electro-activation resulted from the synergistic effect of its partial hydrolysis and the formation of antioxidant components that were able to scavenge free radicals. In conclusion, the findings of this study reveal that the whey treated by the safety electro-activation technology has both lactulose-prebiotic and antioxidant properties and could have a substantial application in the manufacture of pharmaceutical and functional foods. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Discretion over Valor: The AAUP during the McCarthy Years

ERIC Educational Resources Information Center

Aby, Stephen H.

2009-01-01

In recent years, there has been considerable and renewed interest in the effects of McCarthyism on academia. Ellen Schrecker's "No Ivory Tower" (1986), Lionel Lewis' "Cold War on Campus" (1988), David Holmes' "Stalking the Academic Communist" (1989), Charles McCormick's "This Nest of Vipers" (1989), Neil Hamilton's "Zealotry and Academic Freedom"…

School Attendance, Absenteeism, and Student Success. Research Brief

ERIC Educational Resources Information Center

Oregon Department of Education, 2015

2015-01-01

Oregon Department of Education staff spoke with principals from five Oregon schools that had low rates of chronic absenteeism compared to schools with similar demographics during the 2014-15 school year: Echo Shaw Elementary School, Free Orchards Elementary School, Dayton Junior High School, Valor Middle School, and North Marion High School. Each…

Valor de la Informacion en la Orientacion Vocacional (The Value of Information in Vocational Education).

ERIC Educational Resources Information Center

Rossi Etchelouz, Nelly Yvis

Information services in vocational education should describe for the student the reality of different professions--current characteristics and socio-economic conditions--and the chances for development in particular professions. This document discusses the need for such information in vocational education for making intelligent career choices and…

Three Accounts of Feminism and Women's Studies in Higher Education. Book Review Essay.

ERIC Educational Resources Information Center

Rice, Suzanne

1996-01-01

Provides an integrative essay that explores three books and their contributions to feminism and women's studies in higher education. Indicates that only one of the three works managed to escape the tendency of academic and popular media to either valorize or demonize feminists and their pursuits. (MAB)

76 FR 76871 - National Pearl Harbor Remembrance Day, 2011

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-08

... security the world has ever known. On the home front, dedicated civilians supported the war effort by... salvage programs and plant Victory gardens. At this time of great strife, we reminded the world there is... tenacity helped define the Greatest Generation and their valor fortified all who served during World War II...

Social Role Valorization Insights into the Social Integration Conundrum

ERIC Educational Resources Information Center

Lemay, Raymond

2006-01-01

More and more persons with mental retardation and psychiatric disabilities are present in mainstream society, yet have little interaction and few relationships outside their own peer groups of devalued persons. Social integration remains a desirable yet elusive goal for most human service organizations, and there continues to be a certain amount…

The Other 17 Hours: Valuing Out-of-School Time. Occasional Papers 30

ERIC Educational Resources Information Center

Teitle, Jennifer, Ed.

2015-01-01

This issue of "Bank Street Occasional Papers" explores the value of time outside of school. Educators have given relatively little scholarly attention to young people's nonschool lives. Ignored or valorized, nonschool spaces show up in educational research only as a backdrop, implying that school learning is the yardstick by which to…

Defense.gov Special Report: Travels with Gates - December 2010

Science.gov Websites

Says Gates Salutes Sailors, Marines at Afghanistan Base Secretary Presents Valor Awards to Bastogne at the U.S. Embassy, Kabul Remarks at Forward Operating Base Howz-e-Madad, Afghanistan Remarks at Base Joyce, Afghanistan Remarks at Forward Operating Base Connolly, Afghanistan Media Availabilty at

77 FR 31682 - In the Matter of Quintek Technologies, Inc., The Saint James Co., Urigen Pharmaceuticals, Inc...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-29

... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] In the Matter of Quintek Technologies, Inc., The Saint James Co., Urigen Pharmaceuticals, Inc., Valor Energy Corp., Wherify Wireless, Inc., and Win... Quintek Technologies, Inc. because it has not filed any periodic reports since the period ended September...

Analyzing Constructions of Polytheistic and Monotheistic Religious Traditions: A Critical Multicultural Approach to Textbooks in Quebec

ERIC Educational Resources Information Center

Abdou, Ehaab D.; Chan, W. Y. Alice

2017-01-01

How are religious traditions and exchanges between them constructed in textbooks used in Quebec? Through a critical discourse analysis of History and Citizenship Education, and Ethics and Religious Culture textbooks, we find that the Abrahamic monotheistic tradition is valorized, while non-Abrahamic monotheistic traditions and polytheism are…

Catalytic valorization of starch-rich food waste into hydroxymethylfurfural (HMF): Controlling relative kinetics for high productivity.

PubMed

Yu, Iris K M; Tsang, Daniel C W; Yip, Alex C K; Chen, Season S; Wang, Lei; Ok, Yong Sik; Poon, Chi Sun

2017-08-01

This study aimed to maximize the valorization of bread waste, a typical food waste stream, into hydroxymethylfurfural (HMF) by improving our kinetic understanding. The highest HMF yield (30mol%) was achieved using SnCl 4 as catalyst, which offered strong derived Brønsted acidity and moderate Lewis acidity. We evaluated the kinetic balance between these acidities to facilitate faster desirable reactions (i.e., hydrolysis, isomerization, and dehydration) relative to undesirable reactions (i.e., rehydration and polymerization). Such catalyst selectivity of SnCl 4 , AlCl 3 , and FeCl 3 was critical in maximizing HMF yield. Higher temperature made marginal advancement by accelerating the undesirable reactions to a similar extent as the desirable pathways. The polymerization-induced metal-impregnated high-porosity carbon was a possible precursor of biochar-based catalyst, further driving up the economic potential. Preliminary economic analysis indicated a net gain of USD 43-236 per kilogram bread waste considering the thermochemical-conversion cost and chemical-trading revenue. Copyright © 2017 Elsevier Ltd. All rights reserved.

Thermal valorization of post-consumer film waste in a bubbling bed gasifier.

PubMed

Martínez-Lera, S; Torrico, J; Pallarés, J; Gil, A

2013-07-01

The use of plastic bags and film packaging is very frequent in manifold sectors and film waste is usually present in different sources of municipal and industrial wastes. A significant part of it is not suitable for mechanical recycling but could be safely transformed into a valuable gas by means of thermal valorization. In this research, the gasification of film wastes has been experimentally investigated through experiments in a fluidized bed reactor of two reference polymers, polyethylene and polypropylene, and actual post-consumer film waste. After a complete experimental characterization of the three materials, several gasification experiments have been performed to analyze the influence of the fuel and of equivalence ratio on gas production and composition, on tar generation and on efficiency. The experiments prove that film waste and analogue polymer derived wastes can be successfully gasified in a fluidized bed reactor, yielding a gas with a higher heating value in a range from 3.6 to 5.6 MJ/m3 and cold gas efficiencies up to 60%. Copyright © 2013 Elsevier Ltd. All rights reserved.

Valorization of Cheese and Tofu Whey through Enzymatic Synthesis of Lactosucrose.

PubMed

Corzo-Martinez, Marta; Luscher, Alice; de Las Rivas, Blanca; Muñoz, Rosario; Moreno, F Javier

2015-01-01

This work deals with the development of a new bioprocess for the efficient synthesis of lactosucrose, a potential prebiotic oligosaccharide with a high value-added, from two important and inexpensive agro-industrial by-products such as tofu whey and cheese whey permeate. The bioconversion is driven by the ability of the enzyme levansucrase SacB from Bacillus subtilis CECT 39 to transfructosylate lactose contained in the cheese whey permeate by using not only sucrose but also raffinose and stachyose, which are present in considerable amounts in the tofu whey, as suitable donors of fructosyl moieties. The maximum lactosucrose concentration obtained from both by-products was 80.1 g L-1 after a short reaction time 120 min at 37°C, leading to productivity and specific productivity values of 40.1 g lactosucrose L-1 h-1 and 80.1 mg lactosucrose U enzyme-1 h-1, respectively. Findings contained in this work could provide a new strategy to valorize agro-industrial by-products as cheese whey permeate and, specially, tofu whey by means of their use as renewable resources in the enzymatic synthesis of bioactive oligosaccharides.

Preparation of sustainable photocatalytic materials through the valorization of industrial wastes.

PubMed

Sugrañez, Rafael; Cruz-Yusta, Manuel; Mármol, Isabel; Morales, Julián; Sánchez, Luis

2013-12-01

A new value-added material was developed from wastes to aim for appropriate waste management and sustainable development. This paper reports the valorization of industrial sandblasting operation wastes (SOWs) as new photocatalytic materials. This waste is composed of Fe2 O3 (60.7 %), SiO2 (29.1 %), and Al2 O3 (3.9 %) as the main components. The high presence of iron oxides was used to develop photocatalytic properties through their thermal transformation into α-Fe2 O3 . The new product, SOW-T, exhibited a good behavior towards the photochemical degradation of organic dyes. The preparation of advanced photocatalytic materials that exhibit self-cleaning and depolluting properties was possible by the inclusion of SOW-T and TiO2 in a cement-based mortar. The synergy observed between both materials enhanced their photocatalytic action. To the best of our knowledge, this is the first report that describes the use of transformed wastes based on iron oxide for the photochemical oxidation of NOx gases. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Ergonomical valorization of working spaces in multipurpose ships.

PubMed

Seif, Mehdi; Degiuli, Nastija; Muftić, Osman

2003-06-01

In this work it is shown how anthropological data are among the most needed factors in ergonomical valorization of crew working spaces. Ship's working or living environment involves many unique human factors, which should be specially considered in our case as limitation of crew space. In this work we have chosen ships of different years of construction to prove this tendency. As a micro study, the work posture analysis using the pulling force experiment is performed in order to determine lumbar moment, intra-abdominal pressure as a measure of evaluating and comparing different crew work positions. As a macro-study, the "crew work posture analysis" was carried out by the use of the data collected from real cases. The most probable work postures in different spaces of a ship are classified and after some corrections of the work place the profile and its grade were determined. The "statistical analysis for real ship's spaces" is also performed, as well as another macro study, in order to show some real designed ship spaces from the point of view of the allocated volume.

Characterization of industrial broccoli discards (Brassica oleracea var. italica) for their glucosinolate, polyphenol and flavonoid contents using UPLC MS/MS and spectrophotometric methods.

PubMed

Thomas, Minty; Badr, Ashraf; Desjardins, Yves; Gosselin, Andre; Angers, Paul

2018-04-15

The agrifood industry produces tons of waste and substandard products that are discarded at great expense. Valorization of industrial residues curbs issues related to food security and environmental problems. Broccoli (Brassica oleracea var. italica) is associated with varied beneficial health effects, but its production yields greater than 25% rejects. We aimed to characterize and quantify industrial broccoli by-products for their glucosinolate and polyphenol contents as a first step towards industrial bio-refining. Broccoli segments and rejected lots of 10 seed cultivars were analyzed using UPLC MS/MS. Variability in the contents of bioactive molecules was observed within and between the cultivars. Broccoli by-products were rich in glucosinolates (0.2-2% dry weight sample), predominantly glucoraphanin (32-64% of the total glucosinolates), whereas the polyphenolic content was less than 0.02% dry weight sample. Valorization of industrial residues facilitates the production of high value functional food ingredients along with socio-economic sustainability. Copyright © 2017 Elsevier Ltd. All rights reserved.

Valorization of functional properties of extract and powder of olive leaves in raw and cooked minced beef meat.

PubMed

Aouidi, Fathia; Okba, Aicha; Hamdi, Moktar

2017-08-01

Olive leaves (OL), available in huge amounts from pruning, are known to be a useful source of biologically active compounds. This study investigated the potential application of OL as a supplement to minced beef meat in order to develop a functional product. The effect of OL extract or powder (100 and 150 µg phenols g -1 meat) on the quality and stability of raw and cooked meat during refrigerated storage was examined. Microwave drying at 600 W gave OL with the highest antioxidant quality (evaluated by TEAC/[phenols] (mg mg -1 ) and DPPH/[phenols] (mg mg -1 )) compared with other methods. OL showed an ability to inhibit (P < 0.05) lipid oxidation (TBARS values (mg MDA kg -1 ) were reduced by 25-65%) and myoglobin oxidation (metmyoglobin production was 43-65% in control samples and 14-35% in treated samples). OL also improved the technological quality of the meat, decreasing (P < 0.05) storage loss (%) and defrosting loss (%) without affecting cooking loss (%) and Napole yield (%). Sensory properties were not modified by the added ingredient at the tested levels (P < 0.05). OL (extract or powder) may have applications in the development of functional meat products of good technological quality that remain stable during storage. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Carbon and energy footprint of the hydrate-based biogas upgrading process integrated with CO2 valorization.

PubMed

Castellani, Beatrice; Rinaldi, Sara; Bonamente, Emanuele; Nicolini, Andrea; Rossi, Federico; Cotana, Franco

2018-02-15

The present paper aims at assessing the carbon and energy footprint of an energy process, in which the energy excess from intermittent renewable sources is used to produce hydrogen which reacts with the CO 2 previously separated from an innovative biogas upgrading process. The process integrates a hydrate-based biogas upgrading section and a CO 2 methanation section, to produce biomethane from the biogas enrichment and synthetic methane from the CO 2 methanation. Clathrate hydrates are crystalline compounds, formed by gas enclathrated in cages of water molecules and are applied to the selective separation of CO 2 from biogas mixtures. Data from the experimental setup were analyzed in order to evaluate the green-house gas emissions (carbon footprint CF) and the primary energy consumption (energy footprint EF) associated to the two sections of the process. The biosynthetic methane production during a single-stage process was 0.962Nm 3 , obtained mixing 0.830Nm 3 of methane-enriched biogas and 0.132Nm 3 of synthetic methane. The final volume composition was: 73.82% CH 4 , 19.47% CO 2 , 0.67% H 2 , 1.98% O 2 , 4.06% N 2 and the energy content was 28.0MJ/Nm 3 . The functional unit is the unitary amount of produced biosynthetic methane in Nm 3 . Carbon and energy footprints are 0.7081kgCO 2eq /Nm 3 and 28.55MJ/Nm 3 , respectively, when the electric energy required by the process is provided by photovoltaic panels. In this scenario, the overall energy efficiency is about 0.82, higher than the worldwide average energy efficiency for fossil methane, which is 0.75. Copyright © 2017 Elsevier B.V. All rights reserved.

Validation of the adherence questionnaire for Brazilian chronic kidney disease patients under hemodialysis.

PubMed

Lins, Silvia Maria de Sá Basilio; Leite, Josete Luzia; Godoy, Simone de; Fuly, Patrícia Dos Santos Claro; Araújo, Silvia Teresa Carvalho de; Silva, Ítalo Rodolfo

2017-01-01

To validate the evaluation questionnaire on adherence of chronic kidney disease (CKD) patients under hemodialysis. We verified the following psychometric properties of the instrument: reliability (stability and internal consistency) and validity (face, content, and construct). The intraclass correlation coefficient reached a value of 0.98 for the adherence questions and 0.91 for the perception questions. Regarding the kappa of the 14 questions examined, 12 had a value > 0.8, whereas the Cronbach's alpha had a value of 0.57. Experts ensured the face and content validity of the instrument, giving it an overall content validity index of 0.96. Construct validity, analyzed by Mann-Whitney test, was achieved as all domains showed a significant association with p<0.01. We verified, by the presented results, that the instrument has been validated for use in Brazil. Validar o questionário de avaliação sobre a adesão do portador de doença renal crônica em hemodiálise. Foram verificadas as seguintes propriedades psicométricas do instrumento: confiabilidade (estabilidade e consistência interna) e validade (de face, de conteúdo e de construto). O coeficiente de correlação intraclasse atingiu valor de 0,98 para as questões de adesão e 0,91 para as questões de percepção. Quanto ao kappa das 14 questões analisadas, 12 obtiveram um valor > 0,8. Já o alfa de Cronbach obteve valor de 0,57. Os especialistas asseguraram a validade de face e de conteúdo do instrumento, conferindo-lhe um índice de validade de conteúdo global de 0,96. A validade de construto, analisada por meio do teste de Mann-Whitney, foi alcançada na medida em que todos os domínios apresentaram uma associação significativa com p < 0,01. Verifica-se, pelos resultados apresentados, que o instrumento foi validado para uso no Brasil.

Curva de aprendizaje en la colocación de tornillos pediculares percutáneos mínimamente invasivos

PubMed Central

Landriel, Federico; Hem, Santiago; Rasmussen, Jorge; Vecchi, Eduardo; Yampolsky, Claudio

2018-01-01

Resumen Objetivo: El objetivo de este estudio fue estimar la curva de aprendizaje necesaria para la correcta colocación de tornillos transpediculares percutáneos (TTP). Introducción: Los TTP son la forma de instrumentación más utilizada en el tratamiento quirúrgico de lesiones espinales que requieren estabilización. Métodos: Evaluamos retrospectivamente la inserción de 422 TTP (T5 a S1) en 75 pacientes operados entre 2013–2016, bajo guía fluoroscópica bidimensional. El cirujano 1 colocó siempre los tornillos del lado derecho y el cirujano 2, la totalidad del lado izquierdo. El posicionamiento y ruptura pedicular fue determinando con la clasificación tomográfica de Gertzbein. Se comparó la precisión en la colocación de TTP de nuestra serie con una tasa de ruptura de 8,08% (rango de 0,67-20,83%), valor de referencia obtenido de un meta-análisis propio. Resultados: De los 422 TTP, 395 fueron insertados en el pedículo sin violación de su cortical (Grado 1 = 93,6%), 27 (6,4%) rompieron la pared pedicular, de los cuales el 3,8% fue Grado 2, el 1,65% Grado 3 y sólo el 0,9% Grado 4. El Cirujano 1, presentó una tasa se ruptura global de 6,6%, alcanzando valores estándares de precisión al colocar 74 TTP; el Cirujano 2 presentó una tasa de ruptura de 6,1%, alcanzando valores de referencia a los 64 TTP; la diferencia entre ambos no fue estadísticamente significativa (P = 0,9009). Conclusión: En la serie evaluada se evidenció que se necesitan colocar aproximadamente 70 TTP para lograr resultados en términos de exactitud intrapedicular comparables con lo reportado por cirujanos experimentados en esta técnica mínimamente invasiva. PMID:29900033

Microencapsulation by Membrane Emulsification of Biophenols Recovered from Olive Mill Wastewaters

PubMed Central

Piacentini, Emma; Poerio, Teresa; Bazzarelli, Fabio; Giorno, Lidietta

2016-01-01

Biophenols are highly prized for their free radical scavenging and antioxidant activities. Olive mill wastewaters (OMWWs) are rich in biophenols. For this reason, there is a growing interest in the recovery and valorization of these compounds. Applications for the encapsulation have increased in the food industry as well as the pharmaceutical and cosmetic fields, among others. Advancements in micro-fabrication methods are needed to design new functional particles with target properties in terms of size, size distribution, and functional activity. This paper describes the use of the membrane emulsification method for the fine-tuning of microparticle production with biofunctional activity. In particular, in this pioneering work, membrane emulsification has been used as an advanced method for biophenols encapsulation. Catechol has been used as a biophenol model, while a biophenols mixture recovered from OMWWs were used as a real matrix. Water-in-oil emulsions with droplet sizes approximately 2.3 times the membrane pore diameter, a distribution span of 0.33, and high encapsulation efficiency (98% ± 1% and 92% ± 3%, for catechol and biophenols, respectively) were produced. The release of biophenols was also investigated. PMID:27171115

Economic Analysis of an Integrated Annatto Seeds-Sugarcane Biorefinery Using Supercritical CO2 Extraction as a First Step

PubMed Central

Albarelli, Juliana Q.; Santos, Diego T.; Cocero, María José; Meireles, M. Angela A.

2016-01-01

Recently, supercritical fluid extraction (SFE) has been indicated to be utilized as part of a biorefinery, rather than as a stand-alone technology, since besides extracting added value compounds selectively it has been shown to have a positive effect on the downstream processing of biomass. To this extent, this work evaluates economically the encouraging experimental results regarding the use of SFE during annatto seeds valorization. Additionally, other features were discussed such as the benefits of enhancing the bioactive compounds concentration through physical processes and of integrating the proposed annatto seeds biorefinery to a hypothetical sugarcane biorefinery, which produces its essential inputs, e.g., CO2, ethanol, heat and electricity. For this, first, different configurations were modeled and simulated using the commercial simulator Aspen Plus® to determine the mass and energy balances. Next, each configuration was economically assessed using MATLAB. SFE proved to be decisive to the economic feasibility of the proposed annatto seeds-sugarcane biorefinery concept. SFE pretreatment associated with sequential fine particles separation process enabled higher bixin-rich extract production using low-pressure solvent extraction method employing ethanol, meanwhile tocotrienols-rich extract is obtained as a first product. Nevertheless, the economic evaluation showed that increasing tocotrienols-rich extract production has a more pronounced positive impact on the economic viability of the concept. PMID:28773616

Chemical Utilization of Albizia lebbeck Leaves for Developing Protein Concentrates as a Dietary Supplement.

PubMed

Khan, Lutful Haque; Varshney, V K

2017-08-17

In search of nonconventional sources of protein to combat widespread malnutrition, the possibility of developing a protein concentrate as an alternative dietary supplement from abundantly available yet poorly valorized leaves of Albizia lebbeck (siris) was examined. A process for recovery of leaf protein concentrate (LPC) from these leaves was optimized and applied for isolation of LPCs from lower, middle, and upper canopies of the tree. The optimized conditions (leaves to water 1:9, coagulation at pH 4.0 using 1 N citric acid at 90°C for 11 minutes) afforded LPCs containing protein 37.15%, 37.57%, and 37.76% in 5.99%, 5.97%, and 6.07% yield, respectively. The proximate nutritional composition, pigments, minerals, in vitro digestibility, and antinutritional factors of these LPCs were determined. Analysis of variance of these data revealed no significant difference with respect to canopy. Use of Albizia lebbeck leaves for development of LPC as a food/feed supplement was revealed.

Overview of psychiatric ethics V: utilitarianism and the ethics of duty.

PubMed

Robertson, Michael; Morris, Kirsty; Walter, Garry

2007-10-01

The aim of this paper is to describe the ethical theories of utilitarianism and the ethics of duty (Kant's ethics) and to evaluate their value as theoretical bases of psychiatric ethics. Utilitarianism is a well-established moral philosophy and has significant instrumental value in dealing with common ethical problems faced by psychiatrists. Despite its capacity to generate solutions to ethical problems, utilitarianism requires a process of what Rawls described as 'reflective equilibrium' to avoid morally repugnant choices, based on utility. The criticisms of utilitarianism, such as the problems of quantifying utility and the responsibility for consequences, are very relevant for psychiatry. Singer's model of utilitarian thinking is particularly problematic for our profession. Kant's ethics provides the pretext for duty bound codes of ethics for psychiatrists, but suffers from problems of flawed claims to the universalizability prescribed by Kant's 'categorical imperative'. Kant's valorization of reason as the core of the autonomy of persons is a valuable insight in understanding psychiatrists' ethical obligations to their patients.

Valorization of indigenous dairy cattle breed through salami production.

PubMed

Gaglio, Raimondo; Francesca, Nicola; Maniaci, Giuseppe; Corona, Onofrio; Alfonzo, Antonio; Giosuè, Cristina; Di Noto, Annamaria; Cardamone, Cinzia; Sardina, Maria Teresa; Portolano, Baldassare; Alabiso, Marco

2016-04-01

The aim of the research was to produce salami manufactured with meat of three different commercial categories of bovine breed: cow on retirement, beef and young bull. A total of six experimental productions, at small-scale plant, were carried out with and without starter culture inoculums. The evolution of physico-chemical parameters in all trials followed the trend already registered for other fermented meat products. Several LAB species were found during process with different levels of species diversity and frequency of isolation among inoculated (mainly Pediococcus pentosaceus and Staphylococcus xylosus) and uninoculated (mainly Enterococcus devriesei, Lactobacillus curvatus and Lactobacillus sakei) trials. Enterobacteriaceae were found at very low levels during the entire ripening period and no pathogenic bacteria were found in any samples. The multivariate analysis showed that starter inoculums and meat affected significantly the physico-chemical and the microbiological composition of salami. The sensory analysis evidenced the highest overall acceptability was displayed by salami produced with meat from cow on retirement. Copyright © 2015 Elsevier Ltd. All rights reserved.

Chapter 1: A Brief Introduction to Lignin Structure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Katahira, Rui; Beckham, Gregg T; Elder, Thomas J.

Lignin is an alkyl-aromatic polymer found in the cell walls of terrestrial plants. Lignin provides structure and rigidity to plants, is a natural, highly effective barrier against microbial attack, and enables water and nutrient transport through plant tissues. Depending on the plant species, the constituents of lignin can vary considerably, leading to substantial diversity in lignin chemistry and structure. Despite nearly a century of research and development attempting to convert lignin into valuable products, lignin in most current and planned biorefinery contexts remains underutilized, most often being burned to generate heat and power. However, the drive towards effective lignin valorizationmore » processes has witnessed a significant resurgence in the past decade, catalyzed by advances in improved understanding of lignin chemistry, structure, and plasticity in parallel with new catalytic and biological approaches to valorize this important, prevalent biopolymer. As a preface to the subsequent chapters in this book, this chapter briefly highlights the known aspects of lignin structure.« less

Homogeneous Reduction of Carbon Dioxide with Hydrogen.

PubMed

Dong, Kaiwu; Razzaq, Rauf; Hu, Yuya; Ding, Kuiling

2017-04-01

Carbon dioxide (CO 2 ), a key greenhouse gas produced from both anthropogenic and natural sources, has been recently considered to be an important C1 building-block for the synthesis of many industrial fuels and chemicals. Catalytic hydrogenation of CO 2 using a homogeneous system is regarded as an efficient process for CO 2 valorization. This approach leads to the direct products including formic acid (HCOOH), carbon monoxide (CO), methanol (MeOH), and methane (CH 4 ). The hydrogenation of CO 2 to CO followed by alkene carbonylation provides value-added compounds, which also avoids the tedious separation and transportation of toxic CO. Moreover, the reduction of CO 2 with H 2 in the presence of amines is of significance to attain fine chemicals through catalytic formylation and methylation reactions. The synthesis of higher alcohols and dialkoxymethane from CO 2 and H 2 has been demonstrated recently, which opens access to new molecular structures using CO 2 as an important C1 source.

Onion skin waste as a valorization resource for the by-products quercetin and biosugar.

PubMed

Choi, In Seong; Cho, Eun Jin; Moon, Jae-Hak; Bae, Hyeun-Jong

2015-12-01

Onion skin waste (OSW), which is produced from processed onions, is a major industrial waste. We evaluated the use of OSW for biosugar and quercetin production. The carbohydrate content of OSW was analyzed, and the optimal conversion conditions were evaluated by varying enzyme mixtures and loading volumes for biosugar production and quercetin extraction. The enzymatic conversion rate of OSW to biosugar was 98.5% at 0.72 mg of cellulase, 0.16 mg of pectinase, and 1.0mg of xylanase per gram of dry OSW. Quercetin extraction also increased by 1.61-fold after complete enzymatic hydrolysis. In addition, the newly developed nano-matrix (terpyridine-immobilized silica-coated magnetic nanoparticles-zinc (TSMNP-Zn matrix) was utilized to separate quercetin from OSW extracts. The nano-matrix facilitated easy separation and purification of quercetin. Using the TSMNP-Zn matrix the quercetin was approximately 90% absorbed. In addition, the recovery yield of quercetin was approximately 75% after treatment with ethylenediaminetetraacetic acid. Copyright © 2015 Elsevier Ltd. All rights reserved.

Improvement and modeling of culture parameters to enhance biomass and lipid production by the oleaginous yeast Cryptococcus curvatus grown on acetate.

PubMed

Béligon, Vanessa; Poughon, Laurent; Christophe, Gwendoline; Lebert, André; Larroche, Christian; Fontanille, Pierre

2015-09-01

The improvement of culture parameters for lipid production from acetate as carbon source was investigated using the oleaginous yeast Cryptococcus curvatus. A new pH regulation system dispensing acetate was developed for fed-batch culture and allowed obtaining nearly 80 g/L biomass within 60 h with a maximal growth rate of 0.28 h(-1). A biological model was developed from experimental data. The influence of three C/N ratios of 300, 500 and 900 were tested during a multi-phases process on lipid accumulation. The C/N ratio of 300 was reported to be the most suitable for lipid storage. No significant increase of lipids content was obtained with higher value. A maximal content of 60% DCW of lipid was obtained. The determination of fatty acids profiles of the microbial oils has confirmed that the valorization of acetate by microbial oils production was a promising perspective. Copyright © 2015 Elsevier Ltd. All rights reserved.

Green ultrasound-assisted extraction of anthocyanin and phenolic compounds from purple sweet potato using response surface methodology

NASA Astrophysics Data System (ADS)

Zhu, Zhenzhou; Guan, Qingyan; Guo, Ying; He, Jingren; Liu, Gang; Li, Shuyi; Barba, Francisco J.; Jaffrin, Michel Y.

2016-01-01

Response surface methodology was used to optimize experimental conditions for ultrasound-assisted extraction of valuable components (anthocyanins and phenolics) from purple sweet potatoes using water as a solvent. The Box-Behnken design was used for optimizing extraction responses of anthocyanin extraction yield, phenolic extraction yield, and specific energy consumption. Conditions to obtain maximal anthocyanin extraction yield, maximal phenolic extraction yield, and minimal specific energy consumption were different; an overall desirability function was used to search for overall optimal conditions: extraction temperature of 68ºC, ultrasonic treatment time of 52 min, and a liquid/solid ratio of 20. The optimized anthocyanin extraction yield, phenolic extraction yield, and specific energy consumption were 4.91 mg 100 g-1 fresh weight, 3.24 mg g-1 fresh weight, and 2.07 kWh g-1, respectively, with a desirability of 0.99. This study indicates that ultrasound-assisted extraction should contribute to a green process for valorization of purple sweet potatoes.

Predictive Multiscale Modeling of Nanocellulose Based Materials and Systems

NASA Astrophysics Data System (ADS)

Kovalenko, Andriy

2014-08-01

Cellulose Nanocrysals (CNC) is a renewable biodegradable biopolymer with outstanding mechanical properties made from highly abundant natural source, and therefore is very attractive as reinforcing additive to replace petroleum-based plastics in biocomposite materials, foams, and gels. Large-scale applications of CNC are currently limited due to its low solubility in non-polar organic solvents used in existing polymerization technologies. The solvation properties of CNC can be improved by chemical modification of its surface. Development of effective surface modifications has been rather slow because extensive chemical modifications destabilize the hydrogen bonding network of cellulose and deteriorate the mechanical properties of CNC. We employ predictive multiscale theory, modeling, and simulation to gain a fundamental insight into the effect of CNC surface modifications on hydrogen bonding, CNC crystallinity, solvation thermodynamics, and CNC compatibilization with the existing polymerization technologies, so as to rationally design green nanomaterials with improved solubility in non-polar solvents, controlled liquid crystal ordering and optimized extrusion properties. An essential part of this multiscale modeling approach is the statistical- mechanical 3D-RISM-KH molecular theory of solvation, coupled with quantum mechanics, molecular mechanics, and multistep molecular dynamics simulation. The 3D-RISM-KH theory provides predictive modeling of both polar and non-polar solvents, solvent mixtures, and electrolyte solutions in a wide range of concentrations and thermodynamic states. It properly accounts for effective interactions in solution such as steric effects, hydrophobicity and hydrophilicity, hydrogen bonding, salt bridges, buffer, co-solvent, and successfully predicts solvation effects and processes in bulk liquids, solvation layers at solid surface, and in pockets and other inner spaces of macromolecules and supramolecular assemblies. This methodology enables rational design of CNC-based bionanocomposite materials and systems. Furthermore, the 3D-RISM-KH based multiscale modeling addresses the effect of hemicellulose and lignin composition on nanoscale forces that control cell wall strength towards overcoming plant biomass recalcitrance. It reveals molecular forces maintaining the cell wall structure and provides directions for genetic modulation of plants and pretreatment design to render biomass more amenable to processing. We envision integrated biomass valorization based on extracting and decomposing the non-cellulosic components to low molecular weight chemicals and utilizing the cellulose microfibrils to make CNC. This is an important alternative to approaches of full conversion of lignocellulose to biofuels that face challenges arising from the deleterious impact of cellulose crystallinity on enzymatic processing.

Radical nature of C- lignin

Treesearch

Laura Berstis; Thomas Elder; Michael Crowley; Gregg T. Beckham

2016-01-01

The recently discovered lignin composed of caffeoyl alcohol monolignols or C-lignin is particularly intriguing given its homogeneous, linear polymeric structure and exclusive benzodioxane linkage between monomers. By virtue of this simplified chemistry, the potential emerges for improved valorization strategies with C-lignin relative to other natural heterogeneous...

Areas naturales protegidas de Puerto Rico

Treesearch

William A. Gould; Maya Quinones; Mariano Solórzano; Waldemar Alcobas; Caryl Alarcon

2011-01-01

En este mapa mostramos las areas naturales protegidas designadas para la conservacion de los recursos naturales en Puerto Rico y regiones reguladas por ley con el potencial de mejorar la conservacion de los mismos. La designacion de areas protegidas es un proceso dinamico debido a que es el resultado de la constante evolucion de valores en los diferentes sectores de la...

Conjuncion y contexto: Contenido semantico y valor estructural de "con que, conque" en el lenguaje de Calderon (Conjunction and Context: Semantic Context and Structural Value in "con que, conque" in Calderon's Literary Style)

ERIC Educational Resources Information Center

Flasche, Hans

1973-01-01

Special issue as a tribute to Dr. Arnold Reichenberger, a well-known Hispanist, who has served as chairman of the Department of Romance Languages at Pennsylvania State University, University Park, Pennsylvania. (DS)

Teacher Judgments and Pupils' Causal Explanations: Social Valorization of Effort-Based Explanations in School Context

ERIC Educational Resources Information Center

Matteucci, Maria Cristina; Tomasetto, Carlo; Selleri, Patrizia; Carugati, Felice

2008-01-01

Achievement evaluation in school contexts may be considered as a kind of social judgment, which is affected by social and moral determinants since it is not merely an estimation of pupils' accomplishment (Dompnier, Pansu, & Bressoux, 2006; Weiner, 2003). Teachers' judgments have been investigated starting from the analysis of two theoretical…

Teaching Girls To Speak Out: The Female Voice in Public Contexts.

ERIC Educational Resources Information Center

Baxter, J. A.

1999-01-01

Discusses why many girls relative to boys experience difficulties when required to speak in formal, public, or unfamiliar contexts. While girls are recognized as good at using collaborative talk in small groups, the public voice is valorized in the world outside school. Reviews current debate in Britain on underachieving boys in light of the…

Where Is Everybody? Valorization in a World that Could Be

ERIC Educational Resources Information Center

Donahue, Marta

2008-01-01

In this article, the author discusses how institutions have not yet made significant inroads toward equipping young people to deal with the problems of the times in which they live. Montessori wrote frequently about the need to create a kind of practical education that would address this issue. The author discusses the possible dangers of using…

3 CFR 8799 - Proclamation 8799 of April 9, 2012. National Former Prisoner of War Recognition Day, 2012

Code of Federal Regulations, 2013 CFR

2013-01-01

... Prisoner of War Recognition Day, 2012 8799 Proclamation 8799 Presidential Documents Proclamations Proclamation 8799 of April 9, 2012 Proc. 8799 National Former Prisoner of War Recognition Day, 2012By the...’s call with courage and valor, braving the peril of combat and pressing onward in the face of...

3 CFR 8756 - Proclamation 8756 of November 18, 2011. National Family Week, 2011

Code of Federal Regulations, 2012 CFR

2012-01-01

... November 18, 2011 Proc. 8756 National Family Week, 2011By the President of the United States of America A.... My Administration remains steadfast in our commitment to families across America. To ensure our... loved ones. Our troops and military families serve with valor at home and overseas, and as a Nation we...

School Language Profiles: Valorizing Linguistic Resources in Heteroglossic Situations in South Africa

ERIC Educational Resources Information Center

Busch, Brigitta

2010-01-01

Although South Africa is committed to a policy of linguistic diversity, the language-in-education policy is still plagued by the racialization of language issues under apartheid and, more recently, by new challenges posed by internal African migration. Drawing on the experience of a school in the Western Cape Province, this paper explores the role…

Physical, textural, and antioxidant properties of extruded waxy wheat flour snack supplemented with several varieties of bran

USDA-ARS?s Scientific Manuscript database

Wheat represents a ubiquitous commodity and while industries valorize 10% of wheat bran, most of this antioxidant-rich byproduct gets discarded. The objective of this study was to incorporate wheat bran into an extruded snack. Bran varieties from hard red spring, white club Bruehl, and purple whea...

Environmental and economic vision of plasma treatment of waste in Makkah

NASA Astrophysics Data System (ADS)

Galaly, Ahmed Rida; van Oost, Guido

2017-10-01

An environmental and economic assessment of the development of a plasma-chemical reactor equipped with plasma torches for the environmentally friendly treatment of waste streams by plasma is outlined with a view to the chemical and energetic valorization of the sustainability in the Kingdom of Saudi Arabia (KSA). This is especially applicable in the pilgrimage season in the city of Makkah, which is a major challenge since the amount of waste was estimated at about 750 thousand tons through Arabic Year 1435H (2015), and is growing at a rate of 3%-5% annually. According to statistics, the value of waste in Saudi Arabia ranges between 8 and 9 billion EUR. The Plasma-Treatment Project (PTP) encompasses the direct plasma treatment of all types of waste (from source and landfill), as well as an environmental vision and economic evaluation of the use of the gas produced for fuel and electricity production in KSA, especially in the pilgrimage season in the holy city Makkah. The electrical power required for the plasma-treatment process is estimated at 5000 kW (2000 kW used for the operation of the system and 3000 kW sold), taking into account the fact that: (1) the processing capacity of solid waste is 100 tons per day (2) and the sale of electricity amounts to 23.8 MW at 0.18 EUR per kWh. (3) The profit from the sale of electricity per year is estimated at 3.27 million EUR and the estimated profit of solid-waste treatment amounts to 6 million EUR per year and (4) the gross profit per ton of solid waste totals 8 million EUR per year. The present article introduces the first stage of the PTP, in Makkah in the pilgrimage season, which consists of five stages: (1) study and treatment of waste streams, (2) slaughterhouse waste treatment, (3) treatment of refuse-derived fuel, (4) treatment of car tires and (5) treatment of slag (the fifth stage associated with each stage from the four previous stages).

Value-added beef products (Productos Carnicos con Valor Agregado)

Treesearch

Mac Donaldson; Will Holder; Jan Holder

2006-01-01

I'm speaking for Will and Jan Holder, who couldn't be here. I happen to be familiar with Will and Jan's company, Ervin's Natural Beef, and its program because I've sold them cattle. Will and Jan's value-added beef program is based on their family ranch in the area known as The Blue, in the mountains of eastern Arizona.

Project VALOR: Trajectories of Change in PTSD in Combat-Exposed Veterans

DTIC Science & Technology

2013-10-01

System Research Service (151B) 150 South Huntington Ave. Boston, MA 02130 REPORT DATE: October 2013 TYPE OF REPORT: Annual...Institute Inc. 150 South Huntington Ave Research 151B USAMRMC 9. SPONSORING / MONITORING AGENCY NAME(S) AND...trajectory subtypes by means of latent growth mixture modeling. The availability of comprehensive data on PTSD symptoms and related exposures and

78 FR 43227 - Meeting of the Public Safety Officer Medal of Valor Review Board

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-19

... those advisory functions specified in 42 U.S.C. 15202. Pursuant to 42 U.S.C. 15201, the President of the... must register at least seven (7) days in advance of the meeting/conference call by contacting Mr. Joy... accommodations should contact Mr. Joy at least seven (7) days in advance of the meeting. Please submit any...

77 FR 51826 - Meeting of the Public Safety Officer Medal of Valor Review Board

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-27

... functions specified in 42 U.S.C. 15202. Pursuant to 42 U.S.C. 15201, the President of the United States is... participate must register at least seven (7) days in advance of the meeting/conference call by contacting Mr... requiring special accommodations should contact Mr. Joy at least seven (7) days in advance of the meeting...

76 FR 56226 - Meeting of the Public Safety Officer Medal of Valor Review Board

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-12

... those advisory functions specified in 42 U.S.C. 15202. Pursuant to 42 U.S.C. 15201, the President of the..., members of the public who wish to participate must register at least seven (7) days in advance of the... least seven (7) days in advance of the meeting. Please submit any comments or written statements for...

Mapping a Space for a Rhetorical-Cultural Analysis: A Case of a Scientific Proposal

ERIC Educational Resources Information Center

Dorpenyo, Isidore Kafui

2015-01-01

This article analyzes a proposal submitted to a funding unit in Michigan Technological University by a PhD Forestry student. A rhetorical-cultural approach of the text provides evidence to argue that scientific writing is rooted in a cultural practice that valorizes certain kinds of thought, practices, rituals, and symbols; that a scientist's work…

[Presentation of the Editor of Gaceta Médica de México].

PubMed

Treviño-Becerra, Alejandro

La Gaceta Médica de México (GMM) es nuestro órgano oficial de divulgación que muestra los valores de la Academia Nacional de Medicina de México. Sirve como identidad del médico mexicano con sus académicos y divulga los fundamentos científicos de la práctica médica nacional.

Rising Valor: A Research Study of Chinese Women Working in Factories, Educating Themselves and Redefining Women's Empowerment

ERIC Educational Resources Information Center

Newton, Claudia Kristine

2017-01-01

Few empirical studies directly address education among women factory workers in China, much less their sense of agency, power, character and awareness. This dissertation seeks to discover whether among women factory workers in the core manufacturing center, the Yangtze River Delta region of China, educational opportunities and other resources…

3 CFR 8683 - Proclamation 8683 of May 27, 2011. Prayer for Peace, Memorial Day, 2011

Code of Federal Regulations, 2012 CFR

2012-01-01

..., answered the call of duty with valor and unwavering devotion. From Gettysburg to Kandahar, America’s sons..., 2011 Proc. 8683 Prayer for Peace, Memorial Day, 2011By the President of the United States of America A... for lasting peace. On this solemn day in which Americans unite in remembrance of our country’s fallen...

Cuadernos de Autoformacion en Participacion Social. Principios y Valores. Volumen 1 (Self Instructional Notebooks on Social Participation. Principles and Values. Volume 1).

ERIC Educational Resources Information Center

Instituto Nacional para la Educacion de los Adultos, Mexico City (Mexico).

The series "Self-instructional Notes on Social Participation" is a six-volume series intended as teaching aids for adult educators. The theoretical, methodological, informative and practical elements of this series will assist professionals in their work and help them achieve greater success. The specific purpose of each notebook is…

Valorization of Cheese and Tofu Whey through Enzymatic Synthesis of Lactosucrose

PubMed Central

Corzo-Martinez, Marta; Luscher, Alice; de las Rivas, Blanca; Muñoz, Rosario; Moreno, F. Javier

2015-01-01

This work deals with the development of a new bioprocess for the efficient synthesis of lactosucrose, a potential prebiotic oligosaccharide with a high value-added, from two important and inexpensive agro-industrial by-products such as tofu whey and cheese whey permeate. The bioconversion is driven by the ability of the enzyme levansucrase SacB from Bacillus subtilis CECT 39 to transfructosylate lactose contained in the cheese whey permeate by using not only sucrose but also raffinose and stachyose, which are present in considerable amounts in the tofu whey, as suitable donors of fructosyl moieties. The maximum lactosucrose concentration obtained from both by-products was 80.1 g L-1 after a short reaction time 120 min at 37°C, leading to productivity and specific productivity values of 40.1 g lactosucrose L-1 h-1 and 80.1 mg lactosucrose U enzyme−1 h−1, respectively. Findings contained in this work could provide a new strategy to valorize agro-industrial by-products as cheese whey permeate and, specially, tofu whey by means of their use as renewable resources in the enzymatic synthesis of bioactive oligosaccharides. PMID:26406885

Valorization of biogas into liquid hydrocarbons in plasma-catalyst reactor

NASA Astrophysics Data System (ADS)

Nikravech, Mehrdad; Rahmani, Abdelkader; Labidi, Sana; Saintini, Noiric

2016-09-01

Biogas represents an important source of renewable energy issued from biological degradation of biomass. It is planned to produce in Europe the amount of biogas equivalent to 6400 kWh electricity and 4500 kteo (kilo tons equivalent oil) in 2020. Currently the biogas is used in cogeneration engines to produce heat and electricity directly in farms or it is injected in gas networks after purification and odorisation. The aim of this work is to propose a third option that consists of valorization of biogas by transformation into liquid hydrocarbons like acetone, methanol, ethanol, acetic acid etc. These chemicals, among the most important feed materials for chemical industries, retain CO2 molecules participating to reduce the greenhouse gas emissions and have high storage energy capacity. We developed a low temperature atmospheric plasma-catalyst reactor (surface dielectric barrier discharge) to transform biogas into chemicals. The conversion rates of CH4 and CO2 are respectively about 50% and 30% depending on operational conditions. The energetic cost is 25 eV/molecule. The yields of liquid hydrocarbon reaches currently 10% wt. More the 11 liquid chemicals are observed in the liquid fraction. Acknowledgements are due to SPC Programme Energie de demain.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fabbri, Andrea; Bonifazi, Giuseppe; Serranti, Silvia, E-mail: silvia.serranti@uniroma1.it

Highlights: • BioMethane Potential of grape marcs was investigated. • Grape marcs were characterized to realize a micro-scale energy recovery. • Comparative BMP batch-tests utilizing lab-scale reactors were performed. • Biogas valorization by grape marcs anaerobic digestion at small scale is evaluated. - Abstract: The BiochemicalMethanePotential (BMP) of winery organic waste, with reference to two Italian red and white grapes (i.e. Nero Buono and Greco) by-products was investigated. The study was carried out to verify the possibility to reduce the production impact in a green-waste-management-chain-perspective. The possibility to efficiently utilize wine-related-by-products for energy production at a micro-scale (i.e. small-medium scalemore » winery production plant) was also verified. Results showed as a good correlation can be established between the percentage of COD removal and the biogas production, as the winery can produce, from its waste methanization, about 7800 kW h year{sup −1} electrical and 8900 kW h year{sup −1} thermal. A critical evaluation was performed about the possibility to utilize the proposed approach to realize an optimal biomass waste management and an energetic valorization in a local-energy-production-perspective.« less

Valorization of MSWI bottom ash for biogas desulfurization: Influence of biogas water content.

PubMed

Fontseré Obis, Marta; Germain, Patrick; Troesch, Olivier; Spillemaecker, Michel; Benbelkacem, Hassen

2017-02-01

In this study an alternative valorization of Municipal Solid Waste Incineration (MSWI) Bottom Ash (BA) for H 2 S elimination from landfill biogas was evaluated. Emphasis was given to the influence of water content in biogas on H 2 S removal efficiency by BA. A small-scale pilot was developed and implemented in a landfill site located in France. A new biogas analyzer was used and allowed real-time continuous measurement of CH 4 , CO 2 , O 2 , H 2 S and H 2 O in raw and treated biogas. The H 2 S removal efficiency of bottom ash was evaluated for different inlet biogas humidities: from 4 to 24g water /m 3 . The biogas water content was found to greatly affect bottom ash efficiency regarding H 2 S removal. With humid inlet biogas the H 2 S removal was almost 3 times higher than with a dry inlet biogas. Best removal capacity obtained was 56gH 2 S/kgdryBA. A humid inlet biogas allows to conserve the bottom ash moisture content for a maximum H 2 S retention. Copyright © 2016 Elsevier Ltd. All rights reserved.

Valorization of rendering industry wastes and co-products for industrial chemicals, materials and energy: review.

PubMed

Mekonnen, Tizazu; Mussone, Paolo; Bressler, David

2016-01-01

Over the past decades, strong global demand for industrial chemicals, raw materials and energy has been driven by rapid industrialization and population growth across the world. In this context, long-term environmental sustainability demands the development of sustainable strategies of resource utilization. The agricultural sector is a major source of underutilized or low-value streams that accompany the production of food and other biomass commodities. Animal agriculture in particular constitutes a substantial portion of the overall agricultural sector, with wastes being generated along the supply chain of slaughtering, handling, catering and rendering. The recent emergence of bovine spongiform encephalopathy (BSE) resulted in the elimination of most of the traditional uses of rendered animal meals such as blood meal, meat and bone meal (MBM) as animal feed with significant economic losses for the entire sector. The focus of this review is on the valorization progress achieved on converting protein feedstock into bio-based plastics, flocculants, surfactants and adhesives. The utilization of other rendering streams such as fat and ash rich biomass for the production of renewable fuels, solvents, drop-in chemicals, minerals and fertilizers is also critically reviewed.

Economic feasibility of microalgal bacterial floc production for wastewater treatment and biomass valorization: A detailed up-to-date analysis of up-scaled pilot results.

PubMed

Vulsteke, Elien; Van Den Hende, Sofie; Bourez, Lode; Capoen, Henk; Rousseau, Diederik P L; Albrecht, Johan

2017-01-01

The economic potential of outdoor microalgal bacterial floc (MaB-floc) raceway ponds as wastewater treatment technology and bioresource of biomass for fertilizer, shrimp feed, phycobiliproteins and biogas in Northwest Europe is assessed. This assessment is based on cost data provided by industry experts, on experimental data obtained from pilot-scale outdoor MaB-floc ponds treating aquaculture and food-industry effluents, and from different biomass valorization tests. MaB-floc ponds exhibit a cost-performance of EUR 0.25-0.50m -3 wastewater which is similar to conventional wastewater treatment technologies. The production cost of MaB-flocs in aquaculture and food industry effluent is EUR 5.29 and 8.07kg -1 TSS, respectively. Capital costs and pond mixing costs are the major expenses. Commercializing MaB-flocs as aquaculture feed generates substantial revenues, but the largest profit potential lies in production of high-purity phycobiliproteins from MaB-flocs. These results highlight the large economic potential of MaB-floc technology, and justify its further development. Copyright © 2016 Elsevier Ltd. All rights reserved.

Valorization of GaN based metal-organic chemical vapor deposition dust a semiconductor power device industry waste through mechanochemical oxidation and leaching: A sustainable green process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swain, Basudev, E-mail: Swain@iae.re.kr; Mishra, Chinmayee; Lee, Chan Gi

2015-07-15

Dust generated during metal organic vapor deposition (MOCVD) process of GaN based semiconductor power device industry contains significant amounts of gallium and indium. These semiconductor power device industry wastes contain gallium as GaN and Ga{sub 0.97}N{sub 0.9}O{sub 0.09} is a concern for the environment which can add value through recycling. In the present study, this waste is recycled through mechanochemical oxidation and leaching. For quantitative recovery of gallium, two different mechanochemical oxidation leaching process flow sheets are proposed. In one process, first the Ga{sub 0.97}N{sub 0.9}O{sub 0.09} of the MOCVD dust is leached at the optimum condition. Subsequently, the leachmore » residue is mechanochemically treated, followed by oxidative annealing and finally re-leached. In the second process, the MOCVD waste dust is mechanochemically treated, followed by oxidative annealing and finally leached. Both of these treatment processes are competitive with each other, appropriate for gallium leaching and treatment of the waste MOCVD dust. Without mechanochemical oxidation, 40.11 and 1.86 w/w% of gallium and Indium are leached using 4 M HCl, 100 °C and pulp density of 100 kg/m{sup 3,} respectively. After mechanochemical oxidation, both these processes achieved 90 w/w% of gallium and 1.86 w/w% of indium leaching at their optimum condition. - Highlights: • Waste MOCVD dust is treated through mechanochemical leaching. • GaN is hardly leached, and converted to NaGaO{sub 2} through ball milling and annealing. • Process for gallium recovery from waste MOCVD dust has been developed. • Thermal analysis and phase properties of GaN to Ga{sub 2}O{sub 3} and GaN to NaGaO{sub 2} is revealed. • Solid-state chemistry involved in this process is reported.« less

The effects of acupressure on labor pains during child birth: randomized clinical trial.

PubMed

Mafetoni, Reginaldo Roque; Shimo, Antonieta Keiko Kakuda

2016-08-08

to analyze the effects of acupressure on the sanyinjiao point for pregnant women in labor at public maternity wards. single-blind controlled clinical trial, randomly done employing a pragmatic profile. We selected 156 pregnant women in their ≥ 37 week/s, who had cervical dilations of ≥ 4 cm and with two or more contractions in 10 minutes. The pregnant women were randomly divided into three groups at a university hospital in the suburbs of Sao Paulo, Brazil, in order to receive either acupressure treatment, a placebo or participate as part of a control group. The acupressure was applied on the sanyinjiao point during the contractions for 20 minutes. Then the intensity of the pain was evaluated using the Visual Analogue Scale (VAS). The averages for the pain measured using the VAS were not different for the three groups that were a part of the study (p-value=0.0929), however they were less in the acupressure groups immediately after receiving the treatment (p-value=<0.0001). This was also the case where the treatment lasted for 1 hour (p-value=0.0001). This was the case in comparison with placebo and control groups. the use of acupressure on the sanyinjiao point is a useful way to alleviate pain in a non-invasive manner. It can improve the quality of care given to pregnant women in labor. Register: RBR-9mhs8r. analisar os efeitos da acupressão no ponto sanyinjiao sobre a dor na fase ativa do trabalho de parto, em gestantes atendidas em maternidade pública. trata-se de um ensaio clínico controlado e randomizado, simples-cego e de caráter pragmático. Foram selecionadas 156 mulheres com idade gestacional ≥ 37 semanas, dilatação cervical ≥ 4 cm e com duas ou mais contrações em 10 minutos. As gestantes foram divididas aleatoriamente em três grupos em um hospital universitário do interior do estado de São Paulo, Brasil, para receber acupressão, placebo ou participar como controle. A acupressão foi aplicada no ponto sanyinjiao durante as contrações, por 20 minutos, e a intensidade da dor avaliada por meio de uma Escala Analógica Visual (EAV). as médias de dor pela EAV não foram diferentes nos três grupos na admissão (p-valor=0,0929), porém foram menores no grupo de acupressão imediatamente após (p-valor=<0,0001) e com 1 h do tratamento (p-valor=0,0001) ao se comparar com placebo e controle. a acupressão no ponto sanyinjiao se mostrou uma medida útil no alívio da dor, não invasiva e um meio de melhorar a qualidade dos cuidados a parturiente. Registro: RBR-9mhs8r. analizar los efectos de la acupresión, en el punto sanyinjiao, sobre el dolor en la fase activa del trabajo de parto, en embarazadas atendidas en maternidad pública. ensayo clínico controlado y aleatorio, simple ciego y de carácter pragmático. Fueron seleccionadas 156 mujeres con edad gestacional ≥ 37 semanas, dilatación cervical ≥ 4 cm y con dos o más contracciones en 10 minutos. Las embarazadas fueron divididas aleatoriamente en tres grupos en un hospital universitario del interior del estado de Sao Paulo, Brasil, para recibir acupresión, placebo o participar como control. La acupresión fue aplicada en el punto sanyinjiao durante las contracciones, por 20 minutos; la intensidad del dolor fue evaluada por medio de una Escala Analógica Visual (EAV). los promedios del dolor por la EAV no fueron diferentes en los tres grupos en la admisión (valor p=0,0929), sin embargo fueron menores en el grupo de acupresión inmediatamente después (valor p=<0,0001) y también después de 1 hora del tratamiento (valor p=0,0001) al compararse con el placebo y control. la acupresión en el punto sanyinjiao se mostró una medida útil en el alivio del dolor, no invasiva y un medio de mejorar la calidad de los cuidados la parturienta. Registro: RBR-9mhs8r.

Impact of Thermomechanical Fiber Pre-Treatment Using Twin-Screw Extrusion on the Production and Properties of Renewable Binderless Coriander Fiberboards.

PubMed

Uitterhaegen, Evelien; Labonne, Laurent; Merah, Othmane; Talou, Thierry; Ballas, Stéphane; Véronèse, Thierry; Evon, Philippe

2017-07-17

The aim of this study consisted of manufacturing renewable binderless fiberboards from coriander straw and a deoiled coriander press cake, thus at the same time ensuring the valorization of crop residues and process by-products. The press cake acted as a natural binder inside the boards owing to the thermoplastic behavior of its protein fraction during thermopressing. The influence of different fiber-refining methods was evaluated and it was shown that a twin-screw extrusion treatment effectively improved fiber morphology and resulted in fiberboards with enhanced performance as compared to a conventional grinding process. The best fiberboard was produced with extrusion-refined straw using a 0.4 liquid/solid (L/S) ratio and with 40% press cake addition. The water sensitivity of the boards was effectively reduced by 63% through the addition of an extrusion raw material premixing operation and thermal treatment of the panels at 200 °C, resulting in materials with good performance showing a flexural strength of 29 MPa and a thickness swelling of 24%. Produced without the use of any chemical adhesives, these fiberboards could thus present viable, sustainable alternatives for current commercial wood-based materials such as oriented strand board, particleboard and medium-density fiberboard, with high cost-effectiveness.

One-Pot Process for Hydrodeoxygenation of Lignin to Alkanes Using Ru-Based Bimetallic and Bifunctional Catalysts Supported on Zeolite Y

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Hongliang; Ruan, Hao; Feng, Maoqi

2017-03-16

The synthesis of high-efficiency and low-cost multifunctional catalysts for hydrodeoxygenation (HDO) of waste lignin into advanced biofuels is crucial for enhancing current biorefinery processes. Inexpensive transition metals, including Fe, Ni, Cu, Zn, were severally co-loaded with Ru on HY zeolite to form bimetallic and bifunctional catalysts. These catalysts were subsequently tested for HDO conversion of softwood lignin and several lignin model compounds. Results indicated that the inexpensive earth abundant metals could modulate the hydrogenolysis activity of Ru and decrease the yield of low molecular weight gaseous side-products. Among all the prepared catalysts, Ru-Cu/HY showed the best HDO performance, giving themore » highest selectivity to hydrocarbon products. The improved catalytic performance of Ru-Cu/HY was probably due to the following three factors: (1) high total and strong acid sites, (2) good dispersion of metal species and limited segregation, (3) high adsorption capacity for polar fractions, including hydroxyl groups and ether bonds. Moreover, all the bifunctional catalysts were proven to be superior over the combination catalysts of Ru/Al2O3 and HY zeolite, and this could be attributed to the “intimacy criterion”. The practical use of the designed catalysts would be promising in lignin valorization.« less

Recent Trends in Sustainable Textile Waste Recycling Methods: Current Situation and Future Prospects.

PubMed

Pensupa, Nattha; Leu, Shao-Yuan; Hu, Yunzi; Du, Chenyu; Liu, Hao; Jing, Houde; Wang, Huaimin; Lin, Carol Sze Ki

2017-08-16

In recent years, there have been increasing concerns in the disposal of textile waste around the globe. The growth of textile markets not only depends on population growth but also depends on economic and fashion cycles. The fast fashion cycle in the textile industry has led to a high level of consumption and waste generation. This can cause a negative environmental impact since the textile and clothing industry is one of the most polluting industries. Textile manufacturing is a chemical-intensive process and requires a high volume of water throughout its operations. Wastewater and fiber wastes are the major wastes generated during the textile production process. On the other hand, the fiber waste was mainly created from unwanted clothes in the textile supply chain. This fiber waste includes natural fiber, synthetic fiber, and natural/synthetic blends. The natural fiber is mostly comprised of cellulosic material, which can be used as a resource for producing bio-based products. The main challenge for utilization of textile waste is finding the method that is able to recover sugars as monosaccharides. This review provides an overview of valorization of textile waste to value-added products, as well as an overview of different strategies for sugar recovery from cellulosic fiber and their hindrances.

Impact of Thermomechanical Fiber Pre-Treatment Using Twin-Screw Extrusion on the Production and Properties of Renewable Binderless Coriander Fiberboards

PubMed Central

Uitterhaegen, Evelien; Labonne, Laurent; Merah, Othmane; Talou, Thierry; Ballas, Stéphane; Véronèse, Thierry

2017-01-01

The aim of this study consisted of manufacturing renewable binderless fiberboards from coriander straw and a deoiled coriander press cake, thus at the same time ensuring the valorization of crop residues and process by-products. The press cake acted as a natural binder inside the boards owing to the thermoplastic behavior of its protein fraction during thermopressing. The influence of different fiber-refining methods was evaluated and it was shown that a twin-screw extrusion treatment effectively improved fiber morphology and resulted in fiberboards with enhanced performance as compared to a conventional grinding process. The best fiberboard was produced with extrusion-refined straw using a 0.4 liquid/solid (L/S) ratio and with 40% press cake addition. The water sensitivity of the boards was effectively reduced by 63% through the addition of an extrusion raw material premixing operation and thermal treatment of the panels at 200 °C, resulting in materials with good performance showing a flexural strength of 29 MPa and a thickness swelling of 24%. Produced without the use of any chemical adhesives, these fiberboards could thus present viable, sustainable alternatives for current commercial wood-based materials such as oriented strand board, particleboard and medium-density fiberboard, with high cost-effectiveness. PMID:28714928

Culturomics: A New Kid on the Block of OMICS to Enable Personalized Medicine.

PubMed

Kambouris, Manousos E; Pavlidis, Cristiana; Skoufas, Efthymios; Arabatzis, Michael; Kantzanou, Maria; Velegraki, Aristea; Patrinos, George P

2018-02-01

This innovation analysis highlights the underestimated and versatile potential of the new field of culturomics and examines its relation to other OMICS system sciences such as infectiomics, metabolomics, phenomics, and pharmacomicrobiomics. The advent of molecular biology, followed by the emergence of various disciplines of the genomics, and most importantly metagenomics, brought about the sharp decline of conventional microbiology methods. Emergence of culturomics has a natural synergy with therapeutic and clinical genomic approaches so as to realize personalized medicine. Notably, the concept of culturomics expands on that of phenomics and allows a reintroduction of the culture-based phenotypic characterization into the 21st century research repertoire, bolstered by robust technology for automated and massive execution, but its potential is largely unappreciated at present; the few available references show unenthusiastic pursuit and in narrow applications. This has not to be so: depending on the specific brand of culturomics, the scope of applications may extend to medicine, agriculture, environmental sciences, pharmacomicrobiomics, and biotechnology innovation. Moreover, culturomics may produce Big Data. This calls for a new generation of data scientists and innovative ways of harnessing and valorizing Big Data beyond classical genomics. Much more detailed and objective classification and identification of microbiota may soon be at hand through culturomics, thus enabling precision diagnosis toward truly personalized medicine. Culturomics may both widen the scope of microbiology and improve its contributions to diagnostics and personalized medicine, characterizing microbes and determining their associations with health and disease dynamics.

MITRA Virtual laboratory for operative application of satellite time series for land degradation risk estimation

NASA Astrophysics Data System (ADS)

Nole, Gabriele; Scorza, Francesco; Lanorte, Antonio; Manzi, Teresa; Lasaponara, Rosa

2015-04-01

This paper aims to present the development of a tool to integrate time series from active and passive satellite sensors (such as of MODIS, Vegetation, Landsat, ASTER, COSMO, Sentinel) into a virtual laboratory to support studies on landscape and archaeological landscape, investigation on environmental changes, estimation and monitoring of natural and anthropogenic risks. The virtual laboratory is composed by both data and open source tools specifically developed for the above mentioned applications. Results obtained for investigations carried out using the implemented tools for monitoring land degradation issues and subtle changes ongoing on forestry and natural areas are herein presented. In detail MODIS, SPOT Vegetation and Landsat time series were analyzed comparing results of different statistical analyses and the results integrated with ancillary data and evaluated with field survey. The comparison of the outputs we obtained for the Basilicata Region from satellite data analyses and independent data sets clearly pointed out the reliability for the diverse change analyses we performed, at the pixel level, using MODIS, SPOT Vegetation and Landsat TM data. Next steps are going to be implemented to further advance the current Virtual Laboratory tools, by extending current facilities adding new computational algorithms and applying to other geographic regions. Acknowledgement This research was performed within the framework of the project PO FESR Basilicata 2007/2013 - Progetto di cooperazione internazionale MITRA "Remote Sensing tecnologies for Natural and Cultural heritage Degradation Monitoring for Preservation and valorization" funded by Basilicata Region Reference 1. A. Lanorte, R Lasaponara, M Lovallo, L Telesca 2014 Fisher-Shannon information plane analysis of SPOT/VEGETATION Normalized Difference Vegetation Index (NDVI) time series to characterize vegetation recovery after fire disturbance International Journal of Applied Earth Observation and Geoinformation 2441-446 2. G Calamita, A Lanorte, R Lasaponara, B Murgante, G Nole 2013 Analyzing urban sprawl applying spatial autocorrelation techniques to multi-temporal satellite data. Urban and Regional Data Management: UDMS Annual 2013, 161 3. R Lasaponara 2013 Geospatial analysis from space: Advanced approaches for data processing, information extraction and interpretation International Journal of Applied Earth Observations and Geoinformation 20 . 1-3 4. R Lasaponara, A Lanorte 2011 Satellite time-series analysis International Journal of Remote Sensing 33 (15), 4649-4652 5. G Nolè, M Danese, B Murgante, R Lasaponara, A Lanorte Using spatial autocorrelation techniques and multi-temporal satellite data for analyzing urban sprawl Computational Science and Its Applications-ICCSA 2012, 512-527

Valorization of titanium metal wastes as tanning agent used in leather industry.

PubMed

Crudu, Marian; Deselnicu, Viorica; Deselnicu, Dana Corina; Albu, Luminita

2014-10-01

The development of new tanning agents and new technologies in the leather sector is required to cope with the increasingly higher environmental pressure on the current tanning materials and processes such as tanning with chromium salts. In this paper, the use of titanium wastes (cuttings) resulting from the process of obtaining highly pure titanium (ingots), for the synthesis of new tanning agent and tanning bovine hides with new tanning agent, as alternative to tanning with chromium salts are investigated. For this purpose, Ti waste and Ti-based tanning agent were characterized for metal content by inductively coupled plasma mass spectrometry (ICP-MS) and chemical analysis; the tanned leather (wet white leather) was characterized by Scanning Electron Microscope/Energy Dispersive Using X-ray (Analysis). SEM/EDX analysis for metal content; Differential scanning calorimetric (DSC), Micro-Hot-Table and standard shrinkage temperature showing a hydrothermal stability (ranged from 75.3 to 77°C) and chemical analysis showing the leather is tanned and can be processed through the subsequent mechanical operations (splitting, shaving). On the other hand, an analysis of major minor trace substances from Ti-end waste (especially vanadium content) in new tanning agent and wet white leather (not detected) and residue stream was performed and showed that leachability of vanadium is acceptable. The results obtained show that new tanning agent obtained from Ti end waste can be used for tanning bovine hides, as eco-friendly alternative for chrome tanning. Copyright © 2014 Elsevier Ltd. All rights reserved.

Demonstration of the waste tire pyrolysis process on pilot scale in a continuous auger reactor.

PubMed

Martínez, Juan Daniel; Murillo, Ramón; García, Tomás; Veses, Alberto

2013-10-15

This work shows the technical feasibility for valorizing waste tires by pyrolysis using a pilot scale facility with a nominal capacity of 150 kWth. A continuous auger reactor was operated to perform thirteen independent experiments that conducted to the processing of more than 500 kg of shredded waste tires in 100 h of operation. The reaction temperature was 550°C and the pressure was 1 bar in all the runs. Under these conditions, yields to solid, liquid and gas were 40.5 ± 0.3, 42.6 ± 0.1 and 16.9 ± 0.3 wt.% respectively. Ultimate and proximate analyses as well as heating value analysis were conducted for both the solid and liquid fraction. pH, water content, total acid number (TAN), viscosity and density were also assessed for the liquid and compared to the specifications of marine fuels (standard ISO 8217). Gas chromatography was used to calculate the composition of the gaseous fraction. It was observed that all these properties remained practically invariable along the experiments without any significant technical problem. In addition, the reaction enthalpy necessary to perform the waste tire pyrolysis process (907.1 ± 40.0 kJ/kg) was determined from the combustion and formation enthalpies of waste tire and conversion products. Finally, a mass balance closure was performed showing an excellent reliability of the data obtained from the experimental campaign. Copyright © 2013 Elsevier B.V. All rights reserved.

Women of valor: post-traumatic stress disorder in the dental practice.

PubMed

Kloeffler, G Davis

2015-01-01

Dental professionals can intervene in head, neck and facial pain found in female patients who suffer from post-traumatic stress disorder (PTSD). There are three theories for why women are predisposed to pain: hormonal differences, nervous system rewiring and sympathetic issues. This article includes case studies of three patients who are representative of these theories. A rapid, nonintrusive intervention will also be described.

3 CFR 8764 - Proclamation 8764 of December 6, 2011. National Pearl Harbor Remembrance Day, 2011

Code of Federal Regulations, 2012 CFR

2012-01-01

... Generation and their valor fortified all who served during World War II. As a Nation, we look to December 7... 3 The President 1 2012-01-01 2012-01-01 false Proclamation 8764 of December 6, 2011. National... that our military is the greatest force for liberty and security the world has ever known. On the home...

Parents' Views of an Optimal School Life: Using Social Role Valorization to Explore Differences in Parental Perspectives When Children Have Intellectual Disability

ERIC Educational Resources Information Center

Mann, Glenys; Moni, Karen; Cuskelly, Monica

2016-01-01

Children with disability continue to experience disadvantage in their school lives; thus, the question of what makes up an optimal school life, and whether this is different for children with disability, becomes critical. This paper reports on research into parental views about an optimal school life and the usefulness of Social Role Valorization…

Incertidumbre en los valores de la fuerza de oscilador de las lineas espectrales y su influencia en el calculo de abundancias

NASA Astrophysics Data System (ADS)

Marchiano, P. E.; Di Rocco, H. O.; Cruzado, A.

In this paper; we compare oscillator strengths values from XeII lines theoretically obtained with values obtained via experimentation. We put forward a working hypothesis aimed at reaching the best possible agreement; and applying it to the study of abundances of other elements in the atmospheres of chemically peculiar stars. FULL TEXT IN SPANISH

The perception of the clinical relevance of the MDS-Home Care(C) tool by trainers in general practice in Belgium.

PubMed

Duyver, Corentin; Van Houdt, Sabine; De Lepeleire, Jan; Dory, Valerie; Degryse, Jean-Marie

2010-12-01

comprehensive geriatric assessment has been advocated as an effective way to first identify multidimensional needs and second to establish priorities for organizing an individual health care plan for community-dwelling elderly. This paper reports on the perception of an internationally evaluated assessment system for use in community care programmes, the Minimal Data Set-Home Care (MDS-HC), by a group of experienced GP trainers. the primary study aim was to determine the perception of a standardized home care assessment system (MDS-HC) by GP trainers in terms of acceptability, perceived clinical relevance, care planning empowerment and valorization of the GP. sixty-five first-year GP trainees were educated about the MDS-HC and the use of a first version of an electronic interface. Each trainee included two elderly patients, based on strict inclusion criteria. Prior to the assessment, GP trainers and trainees were invited to complete together a basic medical record on the basis of their knowledge of the included patients. Next, the collected data, covering the multiple domains by MDS-HC, were introduced in the electronic interface by the trainee. Based on the collected data for each patient, a series of clinical assessment protocols (CAP's) were generated. Afterwards, these CAP's were critically discussed with the trainer. To investigate how the application of the MDS-HC was perceived, a 21 Likert-type item scale was drawn up based on four dimensions regarding the tool. the perception questionnaire had a good internal consistency (Cronbach's alpha 0.93). The first version of the electronic interface was considered not 'user-friendly' enough and the introduction of data time-consuming. The perception of the GP's about the overall clinical relevance of the MDS-HC was found to have little added value for the GP in the establishment of a personal management plan. many developments in health care result in an increasing demand for a standardized home care assessment system. In Belgium, the federal public health service advised to promote the MDS-HC for use in the community setting. In this study, it appears that its added value was not perceived by this sample of 37 experienced GP trainers as an empowering tool in term of management of the patient and valorization of the role of GP.

THE CIDOC CRM GAME: A Serious Game Approach to Ontology Learning

NASA Astrophysics Data System (ADS)

Guillem, A.; Bruseker, G.

2017-08-01

Formal ontologies such as CIDOC CRM (Conceptual Reference Model) form part of the central strategy for the medium and longterm integration of cultural heritage data to allow for its greater valorization and dissemination. Despite this, uptake of CIDOC CRM at the ground level of Cultural Heriage (CH) practice is limited. Part of the reason behind this lack of uptake lies in the fact that ontologies are considered too complicated and abstract for application in real life scenarios. This paper presents the rationale behind and the design of a CIDOC CRM game, the intent of which is to provide a learning mechanism to allow learners of wide backgrounds and interests to approach CIDOC CRM in a hands-on and interactive fashion. The CIDOC CRM game consist of decks of cards and game boards that allow players to engage with the concepts of a formal ontology in relation to real data in an entertaining and informative way. It is argued that the CIDOC CRM Game can form an important part of introducing the basic elements of formal ontology and this standard to a wider audience in order to aid wider understanding and adoption of the same.

Plasma membranes modified by plasma treatment or deposition as solid electrolytes for potential application in solid alkaline fuel cells.

PubMed

Reinholdt, Marc; Ilie, Alina; Roualdès, Stéphanie; Frugier, Jérémy; Schieda, Mauricio; Coutanceau, Christophe; Martemianov, Serguei; Flaud, Valérie; Beche, Eric; Durand, Jean

2012-07-30

In the highly competitive market of fuel cells, solid alkaline fuel cells using liquid fuel (such as cheap, non-toxic and non-valorized glycerol) and not requiring noble metal as catalyst seem quite promising. One of the main hurdles for emergence of such a technology is the development of a hydroxide-conducting membrane characterized by both high conductivity and low fuel permeability. Plasma treatments can enable to positively tune the main fuel cell membrane requirements. In this work, commercial ADP-Morgane® fluorinated polymer membranes and a new brand of cross-linked poly(aryl-ether) polymer membranes, named AMELI-32®, both containing quaternary ammonium functionalities, have been modified by argon plasma treatment or triallylamine-based plasma deposit. Under the concomitant etching/cross-linking/oxidation effects inherent to the plasma modification, transport properties (ionic exchange capacity, water uptake, ionic conductivity and fuel retention) of membranes have been improved. Consequently, using plasma modified ADP-Morgane® membrane as electrolyte in a solid alkaline fuel cell operating with glycerol as fuel has allowed increasing the maximum power density by a factor 3 when compared to the untreated membrane.

Plasma Membranes Modified by Plasma Treatment or Deposition as Solid Electrolytes for Potential Application in Solid Alkaline Fuel Cells

PubMed Central

Reinholdt, Marc; Ilie, Alina; Roualdès, Stéphanie; Frugier, Jérémy; Schieda, Mauricio; Coutanceau, Christophe; Martemianov, Serguei; Flaud, Valérie; Beche, Eric; Durand, Jean

2012-01-01

In the highly competitive market of fuel cells, solid alkaline fuel cells using liquid fuel (such as cheap, non-toxic and non-valorized glycerol) and not requiring noble metal as catalyst seem quite promising. One of the main hurdles for emergence of such a technology is the development of a hydroxide-conducting membrane characterized by both high conductivity and low fuel permeability. Plasma treatments can enable to positively tune the main fuel cell membrane requirements. In this work, commercial ADP-Morgane® fluorinated polymer membranes and a new brand of cross-linked poly(aryl-ether) polymer membranes, named AMELI-32®, both containing quaternary ammonium functionalities, have been modified by argon plasma treatment or triallylamine-based plasma deposit. Under the concomitant etching/cross-linking/oxidation effects inherent to the plasma modification, transport properties (ionic exchange capacity, water uptake, ionic conductivity and fuel retention) of membranes have been improved. Consequently, using plasma modified ADP-Morgane® membrane as electrolyte in a solid alkaline fuel cell operating with glycerol as fuel has allowed increasing the maximum power density by a factor 3 when compared to the untreated membrane. PMID:24958295

From Vegetable Waste to New Agents for Potential Health Applications: Antioxidant Properties and Effects of Extracts, Fractions and Pinocembrin from Glycyrrhiza glabra L. Aerial Parts on Viability of Five Human Cancer Cell Lines.

PubMed

Aiello, Francesca; Armentano, Biagio; Polerà, Nicoletta; Carullo, Gabriele; Loizzo, Monica Rosa; Bonesi, Marco; Cappello, Maria Stella; Capobianco, Loredana; Tundis, Rosa

2017-09-13

Glycyrrhiza glabra cultivation and harvesting produces substantial quantities of aerial parts as waste. With the aim to prospect an innovative valorization of these byproducts, the aerial parts were harvested in May and October and analyzed for their chemical profile, antioxidant properties, and effects on viability of five cancer cell lines. Pinocembrin was the main constituent. A significant protection of lipid peroxidation was observed with the May total extract (IC 50 of 4.2 ± 0.4 μg/mL at 30 min of incubation). The effects on viability of HeLa, MCF-7, MDA-MB-231, Caco-2, and PC3 human cancer cells were investigated. All samples shown a remarkable activity with IC 50 values below 25 μg/mL. Samples from plants harvested in May exhibited greater activity than those harvested in October. MCF-7 and HeLa were the most sensitive cells with IC 50 in the range 2.73-3.01 and 3.28-5.53 μg/mL, respectively. G. glabra aerial parts represent a good source of valuable products.

Valorization of phosphogypsum waste as asphaltic bitumen modifier.

PubMed

Cuadri, A A; Navarro, F J; García-Morales, M; Bolívar, J P

2014-08-30

The accumulation of phosphogypsum waste from the fertilizer industries, which remain in regulated stacks occupying considerable land resources, is causing significant environment problems worldwide. In that sense, the scientific community is being pressured to find alternative ways for their disposal. In this research, we propose a novel application for phosphogypsum waste, as a modifier of bitumen for flexible road pavements. Viscous flow tests carried out on bitumen modified with a phosphogypsum waste and doped with sulfuric acid demonstrated an extraordinary increase in viscosity, at 60°C, when compared to a counterpart sample which had been modified with gypsum, the main component of phosphogypsum. Similarly, a significant improvement in the viscoelastic response of the resulting material at high temperatures was also found. FTIR (Fourier transform infrared spectroscopy) scans provided evidences of the existence of chemical reactions involving phosphorus, as revealed by a new absorption band from 1060 to 1180cm(-1), related to COP vibrations. This result points at phosphorus contained in the phosphogypsum impurities to be the actual "modifying" substance. Furthermore, no COP band was observed in the absence of sulfuric acid, which seems to be the "promoting" agent of this type of bond. Copyright © 2014 Elsevier B.V. All rights reserved.

Enzymatic Specific Production and Chemical Functionalization of Phenylpropanone Platform Monomers from Lignin

PubMed Central

Hasegawa, Ryoichi; Kurosawa, Kanako; Maeda, Allyn H.; Koizumi, Toshio; Nishimura, Hiroshi; Okada, Hitomi; Qu, Chen; Saito, Kaori; Watanabe, Takashi; Hatada, Yuji

2016-01-01

Abstract Enzymatic catalysis is an ecofriendly strategy for the production of high‐value low‐molecular‐weight aromatic compounds from lignin. Although well‐definable aromatic monomers have been obtained from synthetic lignin‐model dimers, enzymatic‐selective synthesis of platform monomers from natural lignin has not been accomplished. In this study, we successfully achieved highly specific synthesis of aromatic monomers with a phenylpropane structure directly from natural lignin using a cascade reaction of β‐O‐4‐cleaving bacterial enzymes in one pot. Guaiacylhydroxylpropanone (GHP) and the GHP/syringylhydroxylpropanone (SHP) mixture are exclusive monomers from lignin isolated from softwood (Cryptomeria japonica) and hardwood (Eucalyptus globulus). The intermediate products in the enzymatic reactions show the capacity to accommodate highly heterologous substrates at the substrate‐binding sites of the enzymes. To demonstrate the applicability of GHP as a platform chemical for bio‐based industries, we chemically generate value‐added GHP derivatives for bio‐based polymers. Together with these chemical conversions for the valorization of lignin‐derived phenylpropanone monomers, the specific and enzymatic production of the monomers directly from natural lignin is expected to provide a new stream in “white biotechnology” for sustainable biorefineries. PMID:27878983

Simultaneous production of intracellular triacylglycerols and extracellular polyol esters of fatty acids by Rhodotorula babjevae and Rhodotorula aff. paludigena.

PubMed

Garay, Luis A; Sitepu, Irnayuli R; Cajka, Tomas; Cathcart, Erin; Fiehn, Oliver; German, J Bruce; Block, David E; Boundy-Mills, Kyria L

2017-10-01

Microbial oils have been analyzed as alternatives to petroleum. However, just a handful of microbes have been successfully adapted to produce chemicals that can compete with their petroleum counterparts. One of the reasons behind the low success rate is the overall economic inefficiency of valorizing a single product. This study presents a lab-scale analysis of two yeast species that simultaneously produce multiple high-value bioproducts: intracellular triacylglycerols (TG) and extracellular polyol esters of fatty acids (PEFA), two lipid classes with immediate applications in the biofuels and surfactant industries. At harvest, the yeast strain Rhodotorula aff. paludigena UCDFST 81-84 secreted 20.9 ± 0.2 g L -1 PEFA and produced 8.8 ± 1.0 g L -1 TG, while the yeast strain Rhodotorula babjevae UCDFST 04-877 secreted 11.2 ± 1.6 g L -1 PEFA and 18.5 ± 1.7 g L -1 TG. The overall glucose conversion was 0.24 and 0.22 g (total lipid) g (glucose) -1 , respectively. The results present a stable and scalable microbial growth platform yielding multiple co-products.

Addressing Facts and Gaps in the Phenolics Chemistry of Winery By-Products.

PubMed

Machado, Nelson F L; Domínguez-Perles, Raúl

2017-02-14

Grape and wine phenolics display a noticeable structural diversity, encompassing distinct compounds ranging from simple molecules to oligomers, as well as polymers usually designated as tannins. Since these compounds contribute critically to the organoleptic properties of wines, their analysis and quantification are of primordial importance for winery industry operators. Besides, the occurrence of these compounds has been also extensively described in winery residues, which have been pointed as a valuable source of bioactive phytochemicals presenting potential for the development of new added value products that could fit the current market demands. Therefore, the cumulative knowledge generated during the last decades has allowed the identification of the most promising compounds displaying interesting biological functions, as well as the chemical features responsible for the observed bioactivities. In this regard, the present review explores the scope of the existing knowledge, concerning the compounds found in these winery by-products, as well as the chemical features presumably responsible for the biological functions already identified. Moreover, the present work will hopefully pave the way for further actions to develop new powerful applications to these materials, thus, contributing to more sustainable valorization procedures and the development of newly obtained compounds with enhanced biological properties.

Characterization and analysis of the molecular weight of lignin for biorefining studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tolbert, Allison; Akinosho, Hannah; Khunsupat, Ratayakorn

2014-06-04

The molecular weight of lignin is a fundamental property that infl uences the recalcitrance of biomass and the valorization of lignin. The determination of the molecular weight of lignin in native biomass is dependent on the bioresources used and the isolation and purifi cation procedures employed. The three most commonly employed isolation methods are milled wood lignin (MWL), cellulolytic enzyme lignin (CEL), and enzymatic mild acidolysis lignin (EMAL). Common characterization techniques for determining the molecular weight of lignin will be addressed, with an emphasis on gel permeation chromatography (GPC). This review also examines the mechanisms behind several biological, physical, andmore » chemical pre-treatments and their impact on the molecular weight of lignin. The number average molecular weight (Mn), weight average molecular weight (Mw) and polydispersity index (D) all vary in magnitude depending on the biomass source, pre-treatment conditions, and isolation method. Additionally, there is a growing body of literature that supports changes in the molecular weight of lignin in response to genetic modifi cations in the lignin biosynthetic pathways. This review summarizes different procedures for obtaining the molecular weight of lignin that have been used in recent years and highlight future opportunities for applications of lignin.« less

Glycolipid biosurfactants: main properties and potential applications in agriculture and food industry.

PubMed

Mnif, Inès; Ghribi, Dhouha

2016-10-01

Glycolipids, consisting of a carbohydrate moiety linked to fatty acids, are microbial surface active compounds produced by various microorganisms. They are characterized by high structural diversity and have the ability to decrease the surface and interfacial tension at the surface and interface, respectively. Rhamnolipids, trehalolipids, mannosylerythritol lipids and cellobiose lipids are among the most popular glycolipids. They have received much practical attention as biopesticides for controlling plant diseases and protecting stored products. As a result of their antifungal activity towards phytopathogenic fungi and larvicidal and mosquitocidal potencies, glycolipid biosurfactants permit the preservation of plants and plant crops from pest invasion. Also, as a result of their emulsifying and antibacterial activities, glycolipids have great potential as food additives and food preservatives. Furthermore, the valorization of food byproducts via the production of glycolipid biosurfactant has received much attention because it permits the bioconversion of byproducts on valuable compounds and decreases the cost of production. Generally, the use of glycolipids in many fields requires their retention from fermentation media. Accordingly, different strategies have been developed to extract and purify glycolipids. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Project VALOR: Trajectories of Change in PTSD in Combat-Exposed Veterans

DTIC Science & Technology

2015-10-01

Affairs electronic records of Iraq and Afghanistan veterans. Journal of consulting and clinical psychology , 82(4), 569. PRESENTATIONS Barretto...Veterans. Poster presented at the 49th Annual Meeting of the Association of Behavioral and Cognitive Therapies, Chicago, IL. Bovin, M. J., Marx, B...comparison of Operation Iraqi Freedom Deployment Phases. Poster presented at the 49th Annual Meeting of the Association of Behavioral and Cognitive

[National Academy of Medicine, one hundred and fifty-four academic year].

PubMed

Mansilla-Olivares, Armando

2017-01-01

El incalculable valor que atesora la Academia Nacional de Medicina, su enorme influencia y repercusión sobre la toma de decisiones médico-científico-epidemiológicas, radica única y exclusivamente en el dominio del conocimiento, la mente científica y el talento de todos y cada uno de sus miembros, desde su fundación en 1864 hasta nuestros días.

Project VALOR: Trajectories of Change in PTSD in Combat-Exposed Veterans

DTIC Science & Technology

2014-10-01

8. PERFORMING ORGANIZATION REPORT NUMBER Boston VA Research Institute Inc. 150 South Huntington Ave Boston, MA 02130...comprehensive data on PTSD symptoms and related exposures and outcomes at multiple time points in a cohort of VA users with and without PTSD provide...proportion of women in our sample will allow us to examine variation in the associations by gender. 15. SUBJECT TERMS Risk factors for PTSD, PTSD symptom

Lady Astor's Campaign for Nursery Schools in Britain, 1930-1939: Attempting to Valorize Cultural Capital in a Male-Dominated Political Field

ERIC Educational Resources Information Center

Brehony, Kevin J.

2009-01-01

This article examines the work of Lady Nancy Astor (1879-1964) in campaigning for nursery education and nursery schools in Britain from the late 1920s until the Second World War. Arguably no elected politician in England at any time, including the present, has identified themselves more closely with the cause of nursery schooling in Britain.…

Presentaciones escolares. Serie de programas para conmemorar acontecimientos de valor cultural para el mexico americano (School Assembly Presentations. Series of Programs to Commemorate Events of Cultural Value to the Mexican American).

ERIC Educational Resources Information Center

Villarreal, Abelardo; And Others

This material consists of a series of cultural presentations designed for elementary school assemblies or special programs. The activities are intended to strengthen Mexican-American children's awareness of their cultural heritage. Program scripts, poems, songs, historical narratives and skits are included to illustrate and celebrate Mexican and…

Mixed culture polyhydroxyalkanoates production from sugar molasses: the use of a 2-stage CSTR system for culture selection.

PubMed

Albuquerque, M G E; Concas, S; Bengtsson, S; Reis, M A M

2010-09-01

Polyhydroxyalkanoates (PHAs) are promising biodegradable polymers. The use of mixed microbial cultures (MMC) and low cost feedstocks have a positive impact on the cost-effectiveness of the process. It has typically been carried out in Sequencing Batch Reactors (SBR). In this study, a 2-stage CSTR system (under Feast and Famine conditions) was used to effectively select for PHA-storing organisms using fermented molasses as feedstock. The effect of influent substrate concentration (60-120 Cmmol VFA/L) and HRT ratio between the reactors (0.2-0.5h/h) on the system's selection efficiency was assessed. It was shown that Feast reactor residual substrate concentration impacted on the selective pressure for PHA storage (due to substrate-dependent kinetic limitation). Moreover, a residual substrate concentration coming from the Feast to the Famine reactor did not jeopardize the physiological adaptation required for enhanced PHA storage. The culture reached a maximum PHA content of 61%. This success opens new perspectives to the use of wastewater treatment infrastructure for PHA production, thus valorizing either excess sludge or wastewaters. Copyright 2010 Elsevier Ltd. All rights reserved.

Valorization of residual bacterial biomass waste after polyhydroxyalkanoate isolation by hydrothermal treatment.

PubMed

Wei, Liqing; Liang, Shaobo; Coats, Erik R; McDonald, Armando G

2015-12-01

Hydrothermal treatment (HTT) was used to convert residual bacterial biomass (RBB), recovered from poly(3-hydroxybutyrate-co-3-hydroxyvalerate) production, into valuable bioproducts. The effect of processing temperatures (150, 200, and 250°C) on the bioproducts (water-solubles (WSs), bio-oil, insoluble residue, and gas) was investigated. The yields of bio-oil and gas were higher at higher temperatures. The maximum WS content (28 wt%) was obtained at 200°C. GCMS analysis showed higher content of aromatics and N-containing compounds with increasing temperature. ESI-MS revealed chemical compounds (e.g. protein, carbohydrate, lipids, and lignin) associated with RBB are fragmented into smaller molecules (monomers) at higher HTT temperatures. The WS fraction contained totally 838, 889 and 886mg/g acids and 160, 31 and 21 mg/g carbohydrate for HTT at 150, 200, and 250°C, respectively. The solid residues contain unconverted compounds, especially after HTT at 150°C. The WS products (acids and carbohydrates) could be used directly for PHA biosynthesis. Copyright © 2015 Elsevier Ltd. All rights reserved.

Dry anaerobic digestion of food waste and cardboard at different substrate loads, solid contents and co-digestion proportions.

PubMed

Capson-Tojo, Gabriel; Trably, Eric; Rouez, Maxime; Crest, Marion; Steyer, Jean-Philippe; Delgenès, Jean-Philippe; Escudié, Renaud

2017-06-01

The increasing food waste production calls for developing efficient technologies for its treatment. Anaerobic processes provide an effective waste valorization. The influence of the initial substrate load on the performance of batch dry anaerobic co-digestion reactors treating food waste and cardboard was investigated. The load was varied by modifying the substrate to inoculum ratio (S/X), the total solids content and the co-digestion proportions. The results showed that the S/X was a crucial parameter. Within the tested values (0.25, 1 and 4gVS·gVS -1 ), only the reactors working at 0.25 produced methane. Methanosarcina was the main archaea, indicating its importance for efficient methanogenesis. Acidogenic fermentation was predominant at higher S/X, producing hydrogen and other metabolites. Higher substrate conversions (≤48%) and hydrogen yields (≤62mL·gVS -1 ) were achieved at low loads. This study suggests that different value-added compounds can be produced in dry conditions, with the initial substrate load as easy-to-control operational parameter. Copyright © 2017 Elsevier Ltd. All rights reserved.

Valorization of food waste into hydroxymethylfurfural: Dual role of metal ions in successive conversion steps.

PubMed

Yu, Iris K M; Tsang, Daniel C W; Yip, Alex C K; Chen, Season S; Ok, Yong Sik; Poon, Chi Sun

2016-11-01

This study aimed to transform food waste into a value-added chemical, hydroxymethylfurfural (HMF), and unravel the tangled effects induced by the metal catalysts on each single step of the successive conversion pathway. The results showed that using cooked rice and bread crust as surrogates of starch-rich food waste, yields of 8.1-9.5% HMF and 44.2-64.8% glucose were achieved over SnCl4 catalyst. Protons released from metal hydrolysis and acidic by-products rendered Brønsted acidity to catalyze fructose dehydration and hydrolysis of glycosidic bond. Lewis acid site of metals could facilitate both fructose dehydration and glucose isomerization via promoting the rate-limiting internal hydride shift, with the catalytic activity determined by its electronegativity, electron configuration, and charge density. Lewis acid site of a higher valence also enhanced hydrolysis of polysaccharide. However, the metals also catalyzed undesirable polymerization possibly by polarizing the carbonyl groups of sugars and derivatives, which should be minimized by process optimization. Copyright © 2016 Elsevier Ltd. All rights reserved.

MALDI-TOF MS analysis of cellodextrins and xylo-oligosaccharides produced by hindgut homogenates of Reticulitermes santonensis.

PubMed

Brasseur, Catherine; Bauwens, Julien; Tarayre, Cédric; Mattéotti, Christel; Thonart, Philippe; Destain, Jacqueline; Francis, Frédéric; Haubruge, Eric; Portetelle, Daniel; Vandenbol, Micheline; Focant, Jean-François; De Pauw, Edwin

2014-04-11

Hindgut homogenates of the termite Reticulitermes santonensis were incubated with carboxymethyl cellulose (CMC), crystalline celluloses or xylan substrates. Hydrolysates were analyzed with matrix-assisted laser desorption/ionization coupled to time-of-flight mass spectrometry (MALDI-TOF MS). The method was first set up using acid hydrolysis analysis to characterize non-enzymatic profiles. Commercial enzymes of Trichoderma reesei or T. longibrachiatum were also tested to validate the enzymatic hydrolysis analysis. For CMC hydrolysis, data processing and visual display were optimized to obtain comprehensive profiles and allow rapid comparison and evaluation of enzymatic selectivity, according to the number of substituents of each hydrolysis product. Oligosaccharides with degrees of polymerization (DPs) ranging from three to 12 were measured from CMC and the enzymatic selectivity was demonstrated. Neutral and acidic xylo-oligosaccharides with DPs ranging from three to 11 were measured from xylan substrate. These results are of interest for lignocellulose biomass valorization and demonstrated the potential of termites and their symbiotic microbiota as a source of interesting enzymes for oligosaccharides production.

RAPD and SCAR markers as potential tools for detection of milk origin in dairy products: Adulterant sheep breeds in Serra da Estrela cheese production.

PubMed

Cunha, Joana T; Ribeiro, Tânia I B; Rocha, João B; Nunes, João; Teixeira, José A; Domingues, Lucília

2016-11-15

Serra da Estrela Protected Designation of Origin (PDO) cheese is the most famous Portuguese cheese and has a high commercial value. However, the adulteration of production with cheaper/lower-quality milks from non-autochthones ovine breeds compromises the quality of the final product and undervalues the original PDO cheese. A Randomly Amplified Polymorphic DNA (RAPD) method was developed for efficient detection of adulterant breeds in milk mixtures used for fraudulent production of this cheese. Furthermore, Sequence Characterized Amplified Region (SCAR) markers were designed envisioning the detection of milk adulteration in processed dairy foods. The RAPD-SCAR technique is here described, for the first time, to be potentially useful for detection of milk origin in dairy products. In this sense, our findings will play an important role on the valorization of Serra da Estrela cheese, as well as on other high-quality dairy products prone to adulteration, contributing to the further development of the dairy industry. Copyright © 2016 Elsevier Ltd. All rights reserved.

Surface modification of ZSM-5 zeolite: effect of cation on selective conversion of biomass-derived oil

NASA Astrophysics Data System (ADS)

Widayatno, W. B.

2017-04-01

This paper reports the surface modification of high silica ZSM-5 zeolite, particularly emphasizing the effect of cation type on selective conversion of biomass-derived oil. XRD spectra of the NaOH-treated HZSM-5 showed notable crystallinity decrease at specific crystal plane orientation. The N2-physisorption tests confirmed mesoporosity evolution as NaOH concentration was increased. NH3-desorption tests revealed a significant change on surface acidity which involved realumination and cation replacement processes. The utilization of untreated HZSM-5 as well as hierarchical NaZSM-5 for catalytic conversion of bio-oil showed the effect of cation type and mesoporosity on chemicals distribution. The untreated HZSM-5 showed high selectivity to aromatics, which degraded gradually due to deactivation and poisoning of the acid sites. Meanwhile, hierarchical NaZSM-5 showed high selectivity to phenolic compound, which became more stable for 0.4M NaOH-treated zeolite (Na04). The current findings provide an additional insight on the potentials of NaZSM-5 for bio-oil valorization.

Valorization of kitchen biowaste for ethanol production via simultaneous saccharification and fermentation using co-cultures of the yeasts Saccharomyces cerevisiae and Pichia stipitis.

PubMed

Ntaikou, Ioanna; Menis, Nikolaos; Alexandropoulou, Maria; Antonopoulou, Georgia; Lyberatos, Gerasimos

2018-04-30

The biotransformation of the pre-dried and shredded organic fraction of kitchen waste to ethanol was investigated, via co-cultures of the yeasts Saccharomyces cerevisiae and Pichia stipitis (Scheffersomyces stipitis). Preliminary experiments with synthetic media were performed, in order to investigate the effect of different operational parameters on the ethanol production efficiency of the co-culture. The control of the pH and the supplementation with organic nitrogen were shown to be key factors for the optimization of the process. Subsequently, the ethanol production efficiency from the waste was assessed via simultaneous saccharification and fermentation experiments. Different loadings of cellulolytic enzymes and mixtures of cellulolytic with amylolytic enzymatic blends were tested in order to enhance the substrate conversion efficiency. It was further shown that for solids loading up to 40% waste on dry mass basis, corresponding to 170 g.L -1 initial concentration of carbohydrates, no substrate inhibition occurred, and ethanol concentration up to 45 g.L -1 was achieved. Copyright © 2018 Elsevier Ltd. All rights reserved.

Progress in plant protoplast research.

PubMed

Eeckhaut, Tom; Lakshmanan, Prabhu Shankar; Deryckere, Dieter; Van Bockstaele, Erik; Van Huylenbroeck, Johan

2013-12-01

In this review we focus on recent progress in protoplast regeneration, symmetric and asymmetric hybridization and novel technology developments. Regeneration of new species and improved culture techniques opened new horizons for practical breeding in a number of crops. The importance of protoplast sources and embedding systems is discussed. The study of reactive oxygen species effects and DNA (de)condensation, along with thorough phytohormone monitoring, are in our opinion the most promising research topics in the further strive for rationalization of protoplast regeneration. Following, fusion and fragmentation progress is summarized. Genomic, transcriptomic and proteomic studies have led to better insights in fundamental processes such as cell wall formation, cell development and chromosome rearrangements in fusion products, whether or not obtained after irradiation. Advanced molecular screening methods of both genome and cytoplasmome facilitate efficient screening of both symmetric and asymmetric fusion products. We expect that emerging technologies as GISH, high resolution melting and next generation sequencing will pay major contributions to our insights of genome creation and stabilization, mainly after asymmetric hybridization. Finally, we demonstrate agricultural valorization of somatic hybridization through enumerating recent introgression of diverse traits in a number of commercial crops.

Efficient conversion of brown grease produced by municipal wastewater treatment plant into biofuel using aluminium chloride hexahydrate under very mild conditions.

PubMed

Pastore, Carlo; Lopez, Antonio; Mascolo, Giuseppe

2014-03-01

Wastes produced by oil/water separation at the wastewater treatment plant of Bari West (Southern Italy) were taken, characterized and converted. About 12% of this material was composed of greases, mainly made of free fatty acids (50%) and soaps (34%), and was easily separable by the aqueous phase through a hot centrifugation. After chemical activation of this fatty fraction, a direct esterification was carried out under very mild conditions (320K and atmospheric pressure), converting more than 90% of the original free fatty acids into the respective methyl esters in less than 4h, by using AlCl3·6H2O. The activation energy correlated to the use of this catalyst was also calculated (Eaest=43.9kJmol(-1)). The very low cost of the biodiesel produced (0.45€L(-1)) and the associated relevant specific energy (5.02MJ kgFAMEs(-1)) make such a process a really sustainable and effective example of valorization of a waste. Copyright © 2013 Elsevier Ltd. All rights reserved.

[Valorization of biological resources in tumour libraries].

PubMed

Keelaghan, Thérèse

2006-01-01

The transfer and commercialization of biological materials, whether in the form of tumour samples, tissue samples or chemicals, and of the data base pertaining to such material have become a subject of considerable importance for both the private and public sectors involved in medical research. In order to fully appreciate and apprehend the process for the protection and the valuation of the transferred material, intellectual property law must be taken into account. As a result, a distinction is made between the tangible and intangible elements of the biological material and of the attached data base, thus providing the transferring entity the possibility to claim property rights to future intellectual property arising from the research regarding the transferred material. The transfer of biological material and attached data base without such contractual provisions can lead to the loss of this potential value as well as of physical and legal control over the material transferred by the providing entity. The intentions and the assumptions of the parties must be negotiated and written into terms of contract, at the risk of losing future value due to unexpressed assumptions concerning intangible property rights.

La binaria LSS 3074 y su entorno: ?`una nueva asociación OB?

NASA Astrophysics Data System (ADS)

Niemela, V.; Morrell, N.; Corti, M.

En este trabajo presentamos un nuevo análisis orbital de LSS~3074, junto con tipos espectrales y velocidades radiales de estrellas que podrían constituir con ella una nueva asociación OB. La estrella O4f LSS3074 fue descubierta como binaria espectroscópica de corto período y líneas dobles por Morrell & Niemela (1990, ASP Conf. Ser. 7, 57). Posteriormente, Haefner et~al.(1994, IBVS 3969) encontraron variaciones fotométricas, estimando una inclinación orbital entre 50o y 55o. Teniendo en cuenta la importancia de obtener valores empíricos para las masas de estrellas O tempranas, y considerando la gran dispersión existente entre los valores observados y su discrepancia con los predichos por los modelos teóricos, hemos obtenido nuevas observaciones espectroscópicas de este sistema, con el propósito de mejorar los elementos orbitales derivados en la solución preliminar. Además, como las estrellas O tempranas suelen formar parte de cúmulos y asociaciones OB, hemos llevado a cabo una investigación espectroscópica de varias estrellas tempranas que podrían estar físicamente relacionadas con LSS~3074.

Sugarcane straw as a feedstock for xylitol production by Candida guilliermondii FTI 20037.

PubMed

Hernández-Pérez, Andrés Felipe; de Arruda, Priscila Vaz; Felipe, Maria das Graças de Almeida

2016-01-01

Sugarcane straw has become an available lignocellulosic biomass since the progressive introduction of the non-burning harvest in Brazil. Besides keeping this biomass in the field, it can be used as a feedstock in thermochemical or biochemical conversion processes. This makes feasible its incorporation in a biorefinery, whose economic profitability could be supported by integrated production of low-value biofuels and high-value chemicals, e.g., xylitol, which has important industrial and clinical applications. Herein, biotechnological production of xylitol is presented as a possible route for the valorization of sugarcane straw and its incorporation in a biorefinery. Nutritional supplementation of the sugarcane straw hemicellulosic hydrolyzate as a function of initial oxygen availability was studied in batch fermentation of Candida guilliermondii FTI 20037. The nutritional supplementation conditions evaluated were: no supplementation; supplementation with (NH4)2SO4, and full supplementation with (NH4)2SO4, rice bran extract and CaCl2·2H2O. Experiments were performed at pH 5.5, 30°C, 200rpm, for 48h in 125mL Erlenmeyer flasks containing either 25 or 50mL of medium in order to vary initial oxygen availability. Without supplementation, complete consumption of glucose and partial consumption of xylose were observed. In this condition the maximum xylitol yield (0.67gg(-1)) was obtained under reduced initial oxygen availability. Nutritional supplementation increased xylose consumption and xylitol production by up to 200% and 240%, respectively. The maximum xylitol volumetric productivity (0.34gL(-1)h(-1)) was reached at full supplementation and increased initial oxygen availability. The results demonstrated a combined effect of nutritional supplementation and initial oxygen availability on xylitol production from sugarcane straw hemicellulosic hydrolyzate. Copyright © 2016 Sociedade Brasileira de Microbiologia. Published by Elsevier Editora Ltda. All rights reserved.

Stabilization/solidification of radioactive salt waste by using xSiO2-yAl2O3-zP2O5 (SAP) material at molten salt state.

PubMed

Park, Hwan-Seo; Kim, In-Tae; Cho, Yong-Zun; Eun, Hee-Chul; Lee, Han-Soo

2008-12-15

The molten salt waste from the pyroprocess is one of the problematic wastes to directly apply a conventional process such as vitrification or ceramization. This study suggested a novel method using a reactive material for metal chlorides at a molten temperature of salt waste, and then converting them into manageable product at a high temperature. The inorganic composite, SAP (SiO2-Al2O3-P2O5), synthesized by a conventional sol-gel process has three or four distinctive domains that are bonded sequentially, Si-O-Si-O-A-O-P-O-P. The P-rich phase in the SAP composite is unstable for producing a series of reactive sites when in contact with a molten LiCl salt. After the reaction, metal aluminosilicate, metal aluminophosphate, metal phosphates and gaseous chlorines are generated. From this process, the volatile salt waste is stabilized and it is possible to apply a high temperature process. The reaction products were fabricated successfully by using a borosilicate glass with an arbitrary composition as a chemical binder. There was a low possibility for the valorization of radionuclides up to 1200 degrees C, based on the result of the thermo gravimetric analysis. The Cs and Sr leach rates by the PCT-A method were about 1 x 10(-3) g/(m2 day). For the final disposal of the problematic salt waste, this approach suggested the design concept of an effective stabilizer for metal chlorides and revealed the chemical route to the fabrication of monolithic wasteform by using a composite as an example. Using this method, we could obtain a higher disposal efficiency and lower waste volume, compared with the present immobilization methods.

Potential Functional Byproducts from Guava Purée Processing.

PubMed

Lim, Si Yi; Tham, Paik Yean; Lim, Hilary Yi Ler; Heng, Wooi Shin; Chang, Ying Ping

2018-05-10

The valorization of guava waste requires compositional and functional studies. We tested three byproducts of guava purée processing, namely refiner, siever, and decanter. We analyzed the chemical composition and quantified the prebiotic activity score and selected carbohydrates; we also determined the water holding (WHC), oil holding (OHC), cation exchange capacities, bile acid binding, and glucose dialysis retardation (GDR) of the solid fraction and the antioxidative and α-amylase inhibitory capacities (AIC) of the ethanolic extract. Refiner contained 7.7% lipid, 7.08% protein and a relatively high phytate content; it had a high prebiotic activity score and possessed the highest binding capacity with deoxycholic acid. Siever contained high levels of low molecular weight carbohydrates and total tannin but relatively low crude fiber and cellulose contents. It had the highest binding with chenodeoxycholic acid (74.8%), and exhibited the highest 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging capacity. Decanter was rich in cellulose and had a high prebiotic activity score. The WHC and OHC values of decanter were within a narrow range and also exhibited the highest binding with cholic acid (86.6%), and the highest values of GDR and AIC. The refiner waste could be included in animal feed but requires further processing to reduce the high phytate levels. All three guava byproducts had the potential to be a source of antioxidant dietary fiber (DF), a finding that warrants further in vivo study. To differing extents, the guava byproducts exhibited useful physicochemical binding properties and so possessed the potential for health-promoting activity. These byproducts could also be upgraded to other marketable products so the manufacturers of processed guava might be able to develop their businesses sustainably by making better use of them. © 2018 Institute of Food Technologists®.

43 CFR 2804.19 - How will BLM process my Processing Category 6 application?

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false How will BLM process my Processing... process my Processing Category 6 application? (a) For Processing Category 6 applications, you and BLM must enter into a written agreement that describes how BLM will process your application. The final agreement...

43 CFR 2804.19 - How will BLM process my Processing Category 6 application?

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false How will BLM process my Processing... process my Processing Category 6 application? (a) For Processing Category 6 applications, you and BLM must enter into a written agreement that describes how BLM will process your application. The final agreement...

Sustainable Energy-Storage Materials from Lignin-Graphene Nanocomposite-Derived Porous Carbon Film

DOE PAGES

Tran, Chau D.; Ho, Hoi Chun; Keum, Jong K.; ...

2017-05-30

We present a simple, green approach to fabricating porous free-standing carbon films. An alkaline solution of low-cost, renewable lignin and graphene oxide (GO) is cast, followed by simultaneous carbonization and activation. Lignin, which is the least valued product from several biomass processing industries, is an efficient source of carbon when used as an intercalating agent to separate graphene sheets derived from homogeneous GO/lignin nanocomposite films prepared from an aqueous alkaline (KOH) solution. After thermal treatment the GO/lignin films show complete dispersion of reduced GO sheets within amorphous lignin-derived carbon. Furthermore, the presence of KOH in the film produces activated carbon.more » The resulting activated carbon films display a specific surface area of up to 1744 m2 g 1 and consist of a balance of pore volumes with pore sizes below and above 1 nm. A two-electrode supercapacitor composed of these films in an aqueous electrolyte exhibits near-ideal capacitive behavior at an ultrahigh scan rate of 1 V s 1, while maintaining an excellent specific capacitance of 162 F g 1. Such outstanding performance of renewable carbon as a supercapacitor, in addition to the ease of electrode fabrication from a precursor containing 85 % lignin, offers a novel method for valorization of lignin-rich byproduct streams from biomass processing industries.« less

The collective construction of a guide for caregivers of bedridden patients: experience report.

PubMed

Mendes, Vera Lucia Ferreira; Molini-Avejonas, Daniela Regina; Ribeiro, Allyne; Souza, Luiz Augusto de Paula

2011-09-01

This is a qualitative descriptive-exploratory study that adopts as data gathering method the participant observation of healthcare processes carried out by caregivers of bedridden patients from the coverage area of a Family Health Team of a Basic Health Unit (BHU) in São Paulo (SP), Brazil. The aim of this study was to report the construction of a guide for caregivers of bedridden patients and/or patients confined to the home. This guide was prepared based in a partnership among the Family Healthcare (FHT) and the speech-language pathologists and audiologists teams, and the caregivers of patients from the BHU. The guide was motivated by the construction of a common knowledge, with the aim to contribute with the creation of collaborative networks, apt to be places of discussion and exchange of knowledge, in order to optimize the ability of caregivers to early identify situations that require intervention. The networks also contributed to the valorization of caregivers' role; their knowledge on how to perform in daily living activities; overcoming of limitations; demonstration of actions aimed at the physical and mental well-being of the sick person; expansion of the capacity of ownership of processes of illnesses, autonomy and co-responsibility in healthcare. The guide was printed and delivered to FHT members, healthcare professionals and the community. The feedback was positive and, therefore, the guide was successful for the proposed objective.

Sustainable Energy-Storage Materials from Lignin-Graphene Nanocomposite-Derived Porous Carbon Film

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tran, Chau D.; Ho, Hoi Chun; Keum, Jong K.

We present a simple, green approach to fabricating porous free-standing carbon films. An alkaline solution of low-cost, renewable lignin and graphene oxide (GO) is cast, followed by simultaneous carbonization and activation. Lignin, which is the least valued product from several biomass processing industries, is an efficient source of carbon when used as an intercalating agent to separate graphene sheets derived from homogeneous GO/lignin nanocomposite films prepared from an aqueous alkaline (KOH) solution. After thermal treatment the GO/lignin films show complete dispersion of reduced GO sheets within amorphous lignin-derived carbon. Furthermore, the presence of KOH in the film produces activated carbon.more » The resulting activated carbon films display a specific surface area of up to 1744 m2 g 1 and consist of a balance of pore volumes with pore sizes below and above 1 nm. A two-electrode supercapacitor composed of these films in an aqueous electrolyte exhibits near-ideal capacitive behavior at an ultrahigh scan rate of 1 V s 1, while maintaining an excellent specific capacitance of 162 F g 1. Such outstanding performance of renewable carbon as a supercapacitor, in addition to the ease of electrode fabrication from a precursor containing 85 % lignin, offers a novel method for valorization of lignin-rich byproduct streams from biomass processing industries.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, Dongwook; Vardon, Derek R.; Murali, Dheeptha

We demonstrate hydrothermal (300 degrees C, 10 MPa) catalytic conversion of real waste lipids (e.g., waste vegetable oil, sewer trap grease) to liquid hydrocarbon fuels without net need for external chemical inputs (e.g., H2 gas, methanol). A supported bimetallic catalyst (Pt-Re/C; 5 wt % of each metal) previously shown to catalyze both aqueous phase reforming of glycerol (a triacylglyceride lipid hydrolysis coproduct) to H2 gas and conversion of oleic and stearic acid, model unsaturated and saturated fatty acids, to linear alkanes was applied to process real waste lipid feedstocks in water. For reactions conducted with an initially inert headspace gasmore » (N2), waste vegetable oil (WVO) was fully converted into linear hydrocarbons (C15-C17) and other hydrolyzed byproducts within 4.5 h, and H2 gas production was observed. Addition of H2 to the initial reactor headspace accelerated conversion, but net H2 production was still observed, in agreement with results obtained for aqueous mixtures containing model fatty acids and glycerol. Conversion to liquid hydrocarbons with net H2 production was also observed for a range of other waste lipid feedstocks (animal fat residuals, sewer trap grease, dry distiller's grain oil, coffee oil residual). These findings demonstrate potential for valorization of waste lipids through conversion to hydrocarbons that are more compatible with current petroleum-based liquid fuels than the biodiesel and biogas products of conventional waste lipid processing technologies.« less

Synergetic Effects of Alcohol/Water Mixing on the Catalytic Reductive Fractionation of Poplar Wood

DOE Office of Scientific and Technical Information (OSTI.GOV)

Renders, Tom; Van den Bosch, Sander; Vangeel, Thijs

One of the foremost challenges in lignocellulose conversion encompasses the integration of effective lignin valorization in current carbohydrate-oriented biorefinery schemes. Catalytic reductive fractionation (CRF) of lignocellulose offers a technology to simultaneously produce lignin-derived platform chemicals and a carbohydrate-enriched pulp via the combined action of lignin solvolysis and metal-catalyzed hydrogenolysis. Herein, the solvent (composition) plays a crucial role. In this contribution, we study the influence of alcohol/water mixtures by processing poplar sawdust in varying MeOH/water and EtOH/water blends. The results show particular effects that strongly depend on the applied water concentration. Low water concentrations enhance the removal of lignin from themore » biomass, while the majority of the carbohydrates are left untouched (scenario A). Contrarily, high water concentrations favor the solubilization of both hemicellulose and lignin, resulting in a more pure cellulosic residue (scenario B). For both scenarios, an evaluation was made to determine the most optimal solvent composition, based on two earlier introduced empirical efficiency descriptors (denoted LFDE and LFFE). According to these measures, 30 (A) and 70 vol % water (B) showed to be the optimal balance for both MeOH/water and EtOH/water mixtures. This successful implementation of alcohol/water mixtures allows operation under milder processing conditions in comparison to pure alcohol solvents, which is advantageous from an industrial point of view.« less

Valorization of lignite combustion residues and ferroalumina in the production of aggregates.

PubMed

Anagnostopoulos, I M; Stivanakis, V E; Angelopoulos, G N; Papamantellos, D C

2010-02-15

The present research study investigates the synergy of industrial solid by-products from lignite combustion (fly ash and bottom ash) and aluminum production (ferroalumina) in the production of lightweight aggregates (LWA). The process consists of two stages, pelletization and sintering. Bottom ash (BA) is used as the principal raw material in mixtures while ferroalumina (FAL) is added in lower percentages (5-30 wt%). BA carbon content is used as the fuel of sintering process in high temperatures, around 1250 degrees C, and gas generation is responsible for porous structure formation. Physical properties such as porosity, water absorption and bulk density, of sintering products are measured. Increase of FAL percentage in sintering mixtures results in decrease of porosity from 61% to 35% and of water absorption from 61% to 21% and in increase of bulk density from 1.02 g/cm(3) to 1.80 g/cm(3) of the produced aggregates. Aggregates produced by FAL addition up to 20 wt% are characterized as LWA. Aggregates formed are used in the production of concrete specimens. Compressive strength of concrete increases by increasing FAL addition in aggregates from 5 wt% to 15 wt% (highest strength value), while decrease by increasing FAL addition from 20 wt% to 30 wt%. FAL addition in lignite ashes sintering mixtures (up to 15 wt%) is considered as an important parameter for enhancing aggregates strength.

49 CFR 107.709 - Processing of an application for approval, including an application for renewal or modification.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Processing of an application for approval..., Registrations and Submissions § 107.709 Processing of an application for approval, including an application for... before the disposition of an application. (b) At any time during the processing of an application, the...

Biorefinery cascade processing for creating added value on tomato industrial by-products from Tunisia.

PubMed

Kehili, Mouna; Schmidt, Lisa Marie; Reynolds, Wienke; Zammel, Ayachi; Zetzl, Carsten; Smirnova, Irina; Allouche, Noureddine; Sayadi, Sami

2016-01-01

In today's consumer perception of industrial processes and food production, aspects like food quality, human health, environmental safety, and energy security have become the keywords. Therefore, much effort has been extended toward adding value to biowastes of agri-food industries through biorefinery processing approaches. This study focused, for the first time, on the valorization of tomato by-products of a Tunisian industry for the recovery of value-added compounds using biorefinery cascade processing. The process integrated supercritical CO 2 extraction of carotenoids within the oil fractions from tomato seeds (TS) and tomato peels (TP), followed by a batch isolation of protein from the residues. The remaining lignocellulosic matter from both fractions was then submitted to a liquid hot water (LHW) hydrolysis. Supercritical CO 2 experiments extracted 5.79% oleoresin, 410.53 mg lycopene/kg, and 31.38 mg β-carotene/kg from TP and 26.29% oil, 27.84 mg lycopene/kg, and 5.25 mg β-carotene/kg from TS, on dry weights. Protein extraction yields, nearing 30% of the initial protein contents equal to 13.28% in TP and 39.26% in TS, revealed that TP and TS are a rich source of essential amino acids. LHW treatment run at 120-200 °C, 50 bar for 30 min showed that a temperature of 160 °C was the most convenient for cellulose and hemicellulose hydrolysis from TP and TS, while keeping the degradation products low. Results indicated that tomato by-products are not only a green source of lycopene-rich oleoresin and tomato seed oil (TSO) and of protein with good nutritional quality but also a source of lignocellulosic matter with potential for bioethanol production. This study would provide an important reference for the concept and the feasibility of the cascade fractionation of valuable compounds from tomato industrial by-products.Graphical abstractSchema of biorefinery cascade processing of tomato industrial by-products toward isolation of valuable fractions.

Valorization of aquaculture waste in removal of cadmium from aqueous solution: optimization by kinetics and ANN analysis

NASA Astrophysics Data System (ADS)

Aditya, Gautam; Hossain, Asif

2018-05-01

Cadmium is one of the most hazardous heavy metal concerning human health and aquatic pollution. The removal of cadmium through biosorption is a feasible option for restoration of the ecosystem health of the contaminated freshwater ecosystems. In compliance with this proposition and considering the efficiency of calcium carbonate as biosorbent, the shell dust of the economically important snail Bellamya bengalensis was tested for the removal of cadmium from aqueous medium. Following use of the flesh as a cheap source of protein, the shells of B. bengalensis made up of CaCO3 are discarded as aquaculture waste. The biosorption was assessed through batch sorption studies along with studies to characterize the morphology and surface structures of waste shell dust. The data on the biosorption were subjected to the artificial neural network (ANN) model for optimization of the process. The biosorption process changed as functions of pH of the solution, concentration of heavy metal, biomass of the adsorbent and time of exposure. The kinetic process was well represented by pseudo second order ( R 2 = 0.998), and Langmuir equilibrium ( R 2 = 0.995) had better fits in the equilibrium process with 30.33 mg g-1 of maximum sorption capacity. The regression equation ( R 2 = 0.948) in the ANN model supports predicted values of Cd removal satisfactorily. The normalized importance analysis in ANN predicts Cd2+ concentration, and pH has the most influence in removal than biomass dose and time. The SEM and EDX studies show clear peaks for Cd confirming the biosorption process while the FTIR study depicts the main functional groups (-OH, C-H, C=O, C=C) responsible for the biosorption process. The study indicated that the waste shell dust can be used as an efficient, low cost, environment friendly, sustainable adsorbent for the removal of cadmium from aqueous solution.

Silver Wings, Golden Valor: The USAF Remembers Korea

DTIC Science & Technology

2006-01-01

better high-speed qualities and a better flight control system than the MiG-15. The Sabre jet came to be considered one of the greatest fighter...the advent of fully hydraulic flight control systems with various forms of stability augmentation led to the reintroduction of the slab tail. The...Calif.: Empire Interactive, 1999) designed for use on a Windows 95/98 CD-ROM operating system . This game, one of the finest flight simulations creat

Predictive Relationship between Humane Values of Adolescents Cyberbullying and Cyberbullying Sensibility (Relaciones predictivas entre los valores humanos de los adolescentes, el acoso cibernético y la sensibilidad al acoso cibernético)

ERIC Educational Resources Information Center

Dilmac, Bülent; Yurt, Eyüp; Aydin, Mustafa; Kasarci, Ismail

2016-01-01

Introduction: Cyberbullying has been more common than the traditional bullying in recent years. As with the traditional bullying, humane values likely to explain the reason why adolescents tend to bully via cyber-means. Cyber-bullying behaviors also reasoned by adolescents' sensibility towards it. This study investigates the predictive…

A bill to award a Congressional Gold Medal to the World War II members of the "Doolittle Tokyo Raiders", for outstanding heroism, valor, skill, and service to the United States in conducting the bombings of Tokyo.

THOMAS, 113th Congress

Sen. Brown, Sherrod [D-OH

2013-02-26

House - 11/20/2013 Held at the desk. (All Actions) Notes: For further action, see H.R.1209, which became Public Law 113-106 on 5/23/2014. Tracker: This bill has the status Passed SenateHere are the steps for Status of Legislation:

Reflection on an Ethic of Officership

DTIC Science & Technology

2007-04-01

a moral commit- ment, made publicly, which we secure with our very reputation. The “Title 5 Oath” is simple and makes only three positive moral ...commissioned officers. First of all, it states that the commission is awarded based upon the President’s confidence in the officer’s patriotism, valor ...be refused. The officer then continues to be morally obliged to adhere to his or her original undertaking of service. Indeed, it is an open question

Understanding cost drivers and economic potential of two variants of ionic liquid pretreatment for cellulosic biofuel production

PubMed Central

2014-01-01

Background Ionic liquid (IL) pretreatment could enable an economically viable route to produce biofuels by providing efficient means to extract sugars and lignin from lignocellulosic biomass. However, to realize this, novel IL-based processes need to be developed in order to minimize the overall production costs and accelerate commercial viability. In this study, two variants of IL-based processes are considered: one based on complete removal of the IL prior to hydrolysis using a water-wash (WW) step and the other based on a “one-pot” (OP) process that does not require IL removal prior to saccharification. Detailed techno-economic analysis (TEA) of these two routes was carried out to understand the cost drivers, economic potential (minimum ethanol selling price, MESP), and relative merits and challenges of each route. Results At high biomass loading (50%), both routes exhibited comparable economic performance with an MESP of $6.3/gal. With the possible advances identified (reduced water or acid/base consumption, improved conversion in pretreatment, and lignin valorization), the MESP could be reduced to around $3/gal ($3.2 in the WW route and $2.8 in the OP route). Conclusions It was found that, to be competitive at industrial scale, lowered cost of ILs used and higher biomass loadings (50%) are essential for both routes, and in particular for the OP route. Overall, while the economic potential of both routes appears to be comparable at higher biomass loadings, the OP route showed the benefit of lower water consumption at the plant level, an important cost and sustainability consideration for biorefineries. PMID:24932217

Valorization of a pharmaceutical organic sludge through different composting treatments.

PubMed

Cucina, Mirko; Tacconi, Chiara; Sordi, Simone; Pezzolla, Daniela; Gigliotti, Giovanni; Zadra, Claudia

2018-04-01

Nowadays, the agricultural reuse of pharmaceutical sludge is still limited due to environmental and agronomic issues (e.g. low stabilization of the organic matter, phytotoxicity). The aim of the present study was to evaluate the characteristics of a pharmaceutical sludge derived from the daptomycin production and to study the possibility of improving its quality through composting. The pharmaceutical sludge showed high content of macronutrients (e.g. total Kjeldahl N content was 38 g kg -1 ), but it was also characterized by high salinity (7.9 dS m -1 ), phytotoxicity (germination index was 36.7%) and a low organic matter stabilization. Two different mixtures were prepared (mixture A: 70% sludge + 30% wood chips w/w, mixture B: 45% sludge + 45% wood chips + 10% cereal straw w/w) and treated through static composting using two different aeration systems: active and passive aeration. The mixtures resulted in the production of two different compost, and the evolution of process management parameters was different. The low total solids and organic matter content of mixture A led to the failure of the process. The addition of cereal straw in mixture B resulted in increased porosity and C/N ratio and, consequently, in an optimal development of the composting process (e.g. the final organic matter loss was 54.1% and 63.1% for the passively and actively aerated treatment, respectively). Both passively and actively aerated composting of mixture B improved the quality of the pharmaceutical sludge, by increasing its organic matter stabilization and removing phytotoxicity. Copyright © 2017 Elsevier Ltd. All rights reserved.

What's gender got to do with it? Examining masculinities, health and safety and return to work in male dominated skilled trades.

PubMed

Stergiou-Kita, Mary; Mansfield, Elizabeth; Colantonio, Angela; Moody, Joel; Mantis, Steve

2016-06-16

Electrical injuries are a common cause of work-related injury in male dominated skilled trades. In this study we explored how issues of gender, masculinities and institutional workplace practices shape expectations of men and their choices when returning to work following a workplace electrical injury. Twelve workers, who suffered an electrical injury, and twelve employer representatives, completed semi-structured interviews. Using thematic analysis we identified key themes related to how masculinities influenced men's health and safety during the return to work process. Strong identification with worker roles can influence injured workers decisions to return to work 'too early'. A desire to be viewed as a strong, responsible, resilient worker may intersect with concerns about job loss, to influence participants' decisions to not report safety issues and workplace accidents, to not disclose post-injury work challenges, and to not request workplace supports. Institutionalized workplace beliefs regarding risk, de-legitimization of the severity of injuries, and the valorization of the "tough" worker can further re-enforce dominant masculine norms and influence return to work processes and health and safety practices. Workplaces are key sites where gender identities are constructed, affirmed and institutionalized. Further research is warranted to examine how established masculine norms and gendered workplace expectations can influence workplace health and safety in male dominated high risk occupations. Future research should also evaluate strategies that encourage men to discuss post-injury work challenges and request supports when work performance or health and safety issues arise during the return to work process.

Plasma Total Antioxidant Capacity and Cardiometabolic Risk in Non-Obese and Clinically Healthy Young Adults.

PubMed

Costa, Jamille Oliveira; Vásquez, Cecília M Passos; Santana, Gleiciane de Jesus; Silva, Natanael de Jesus; Braz, Juciene de Matos; Jesus, Amélia M Ribeiro de; Silva, Danielle Góes da; Cunha, Luana Celina Seraphim; Barbosa, Kiriaque Barra Ferreira

2017-07-10

The oxidative biomarkers play an important role in the genesis of cardiometabolic risk-related processes. To investigate the total antioxidant capacity of plasma and its association with cardiometabolic risk in non-obese and clinically healthy young adults. University students of the state of Sergipe, Brazil, aged between 18 and 25 years, were recruited for this study from May of 2013 and October of 2014. Anthropometric, clinical and biochemical parameters were measured and analyzed using protocols which were previously standardized and described in the literature. The measurement of plasma total antioxidant capacity was based on the ability that all the antioxidants present in the sample (plasma) have to inhibit the oxidation of the oxidizable substrate ABTS (2,2`- Azino-di-[3-ethylbenzthiazoline sulphonate]) to ABTS•+ by metmyoglobin. Approximately 25% of the sample presented more than one component of cardiometabolic risk. Low HDL-cholesterol was the most prevalent component. Compared to absence of components, the subjects with at least one component presented greater body weight and waist circumference, higher levels of diastolic blood pressure and fasting glucose, greater total cholesterol/HDL-c ratio, and lower levels of HDL-c (p < 0.05). Fasting glycemia was the only parameter which was associated with total antioxidant capacity (R2 = 0.10; β = 0.17; p = 0.001). The plasma total antioxidant capacity was not able to predict the cardiometabolic risk components due possibly to the establishment of compensatory mechanisms that become activated in physiological conditions. Os biomarcadores oxidativos exercem um importante papel na gênese dos processos relacionados ao risco cardiometabólico. Investigar a capacidade antioxidante total do plasma e sua associação com risco cardiometabólico em adultos jovens, não obesos e clinicamente saudáveis. Estudantes universitários do estado de Sergipe, Brasil, com idade entre 18 e 25 anos, foram recrutados entre maio de 2013 e outubro de 2014. Parâmetros antropométricos, clínicos e bioquímicos foram medidos e analisados usando protocolos previamente padronizados e descritos na literatura. A medida da capacidade antioxidante total do plasma baseou-se na capacidade de todos os antioxidantes presentes na amostra (plasma) em inibir a oxidação do substrato oxidável ABTS (2,2-Azino-bis-(3-etilbenzotiazolina-6-sulfonato) a ABTS•+ pela metamioglobina. Aproximadamente 25% da amostra apresentaram mais de um componente do risco cardiometabólico. Valores baixos de HDL foram o componente mais prevalente. Em comparação à ausência de componentes, os indivíduos com pelo menos um componente apresentou valores mais altos de peso corporal, circunferência da cintura, pressão sanguínea diastólica, glicemia de jejum e razão colesterol total/HDL-c, e valores mais baixos de HDL-c (p < 0,05). A glicemia de jejum foi o único parâmetro que se associou com a capacidade antioxidante total (R2 = 0,10; β = 0,17; p = 0,001). A capacidade antioxidante total não foi capaz de predizer os componentes do risco cardiometabólico possivelmente devido ao estabelecimento de mecanismos compensatórios que se tornam ativados em condições fisiológicas.

Confirmatory factor analysis of the Appraisal of Self-Care Agency Scale - Revised.

PubMed

Stacciarini, Thaís Santos Guerra; Pace, Ana Emilia

2017-01-30

to analyze the factor structure of the Appraisal of Self-Care Agency Scale-Revised (ASAS-R), adapted for Brazil. methodological study conducted with 150 individuals with diabetes mellitus cared for by the Family Health Strategy, most of whom are elderly with low educational levels. The test of the hypothesis concerning the confirmatory factor composition of the ASAS-R was performed using latent variables structural equations. the model's goodness-of-fit indexes were satisfactory (χ2 = 259.19; χ2/g.l = 2.97, p < 0.001; GFI = 0.85; RMR = 0.07; RMSEA = 0.09); the factor loads were greater than 0.40; and most item-to-factor-correlations presented moderate to strong magnitude (0.34 to 0.58); total alpha value was 0.74, while the alpha of the three factors were 0.69, 0.38 and 0.69, respectively. the scale's factor structure presented satisfactory validity and reliability results, with the exception of one factor. Application of this scale to samples of the general population is desirable in order to strengthen analyses of internal consistency and the dimensionality of the factor structure. This study is expected to contribute to further studies addressing the self-care agency construct and the development of the ASAS-R. analisar a estrutura fatorial da escala de avaliação da capacidade de autocuidado, Appraisal of Self Care Agency Scale-Revised (ASAS-R), adaptada no Brasil. estudo metodológico conduzido em 150 usuários com diabetes mellitus, maioria idosos e com baixa escolaridade, em seguimento na Estratégia Saúde da Família. O teste de hipótese da composição fatorial confirmatória da escala ASAS-R foi realizado via modelo de equações estruturais para variáveis latentes. os valores dos índices de ajuste do modelo foram satisfatórios (χ2 de 259,19; χ2/g.l de 2,97, p < 0,001; GFI = 0,85; RMR = 0,07; RMSEA = 0,09), as cargas fatoriais foram superiores a 0,40, maioria das correlações item e fator foi de moderada a forte magnitude (0,34 a 0,58) e os valores de alfa total de 0,74 e dos três fatores de 0,69, 0,38 e 0,69, respectivamente. estrutura fatorial da escala com resultados satisfatórios de validade e de confiabilidade, exceto um de seus fatores. É desejável que essa Escala seja aplicada em amostras da população geral, para fortalecer as análises de consistência interna e de dimensionalidade da estrutura fatorial, e espera-se que este estudo possa contribuir no avanço de outras pesquisas que trabalham com o construto de capacidade de autocuidado e no desenvolvimento da Escala ASAS-R. analizar la estructura factorial de la escala de evaluación de la capacidad de autocuidado, Appraisal of Self Care Agency Scale-Revised (ASAS-R), adaptada en Brasil. estudio metodológico conducido en 150 usuarios con diabetes mellitus, mayoría de ancianos y con baja escolaridad, acompañados por la Estrategia Salud de la Familia. El test de hipótesis de la composición factorial confirmatoria de la escala ASAS-R fue realizado por medio del modelo de ecuaciones estructurales para variables latentes. los valores de los índices de ajuste del modelo fueron satisfactorios (χ2 de 259,19; χ2/g.l de 2,97, p < 0,001; GFI = 0,85; RMR = 0,07; RMSEA = 0,09), las cargas factoriales fueron superiores a 0,40, la mayoría de las correlaciones ítem y factor varió de moderada a fuerte magnitud (0,34 la 0,58); valores de alfa total de 0,74 y de los tres factores de 0,69, 0,38 y 0,69, respectivamente. la estructura factorial de la escala obtuvo resultados satisfactorios de validez y de confiabilidad, excepto uno de sus factores. Es deseable que esa escala sea aplicada en muestras de la población general, para fortalecer los análisis de consistencia interna y de dimensionalidad de la estructura factorial; y se espera que este estudio pueda contribuir para avanzar en nuevas investigaciones que vengan a trabajar con el constructo de capacidad de autocuidado y con el desarrollo de la escala ASAS-R.

Nuevas estrategias de gestión, tratamiento y valorización de los efluentes organicos pecuarios: Experiencias en USDA. (Management strategies for organic livestock effluents,innovative treatment and valorization)

USDA-ARS?s Scientific Manuscript database

En la actualidad el impacto potencial de los residuos ganaderos en el medio-ambiente representa uno de los desafíos más grandes de la agricultura. Las tecnologías de tratamiento pueden tener un importante papel en el manejo de los residuos ganaderos dando más flexibilidad en los programas de la apli...

Aligned Incentives: Could the Army’s Award System Inadvertently be Hindering Counterinsurgency Operations

DTIC Science & Technology

2009-06-01

and dining room facilities, payment by cheque, special uniform and markings on the uniform, admission to the membership of professional bodies ...accompanied President Lincoln’s body to its burial site; Peter Collier, Medal of Honor: Portraits of Valor beyond the Call of Duty (New York: Artisan, 2003...insurgent/counterinsurgent wars are not recent developments; there is a significant body of literature already devoted to them. Discussed below are some of

Valores, Creencias Y Objectivos: Base del programa de la Escuela Experimental P.K. Yonge. (Values, Beliefs and Objectives: The Basis of Experimental Schools P.K. Yonge's Program.)

ERIC Educational Resources Information Center

Florida Univ., Gainesville. Coll. of Education.

The values, beliefs, and objectives that form the core of the program at the Experimental School P.K. Yonge in the University of Florida are presented in this paper which is written in Spanish. This experimental school serves approximately 900 students from grades one through twelve. The function of the school is to conduct research to solve…

Project VALOR: Trajectories of Change in PTSD in Combat-Exposed Veterans

DTIC Science & Technology

2016-10-01

Behavioral and Cognitive Therapy 50th Annual Meeting. New York, NY. Black, S. K., Erb, S. Green, J. D., Bovin, M., Sloan, D. M., & Marx, B. (November...reactivity and regulation in PTSD; Chair: K. McHugh) at the Association for Behavioral and Cognitive Therapies 49th Annual Meeting. Chicago, IL. Black, S. K...comparison of OIF deployment phases. Poster presented at the Association for Behavioral and Cognitive Therapies 49th Annual Meeting. Chicago, IL

Unchained Interests: American-British-Dutch-Australian Command 1942

DTIC Science & Technology

2014-05-22

DSO), the Dutch Militaire Willems Orde (MWO), the highest Dutch decoration for valor 1C. E . L. Helfrich, Memoires van C.E.L. Helfrich, Eerste Deel: De...British imperial naval defense system east of the Suez.57 It aimed to deter Japanese aggression by building a large naval base and basing 55C. E . L...clearly signaled the power transition that had emerged in Southeast Asia— the Americans only wanted to discuss strategic matters with the 68David E

Opportunities and challenges for seaweed in the biobased economy.

PubMed

van Hal, Jaap W; Huijgen, W J J; López-Contreras, A M

2014-05-01

The unique chemical composition of seaweeds and their fast growth rates offer many opportunities for biorefining. In this article we argue that cascading biorefinery valorization concepts are viable alternatives to only using seaweeds as carbohydrate sources for the fermentative production of biofuels. However, many challenges remain with respect to use of seaweeds for chemical production, such as the large seasonal variation in the chemical composition of seaweeds. Copyright © 2014 Elsevier Ltd. All rights reserved.

Perda de massa em ventos empoeirados de estrelas supergigantes

NASA Astrophysics Data System (ADS)

Vidotto, A. A.; Jatenco-Pereira, V.

2003-08-01

Em praticamente todas as regiões do diagrama HR, as estrelas apresentam evidências observacionais de perda de massa. Na literatura, pode-se encontrar trabalhos que tratam tanto do diagnóstico da perda de massa como da construção de modelos que visam explicá-la. O amortecimento de ondas Alfvén tem sido utilizado como mecanismo de aceleração de ventos homogêneos. Entretanto, sabe-se que os envelopes de estrelas frias contêm grãos sólidos e moléculas. Com o intuito de estudar a interação entre as ondas Alfvén e a poeira e a sua conseqüência na aceleração do vento estelar, Falceta-Gonçalves & Jatenco-Pereira (2002) desenvolveram um modelo de perda de massa para estrelas supergigantes. Neste trabalho, apresentamos um estudo do modelo acima proposto para avaliar a dependência da taxa de perda de massa com alguns parâmetros iniciais como, por exemplo, a densidade r0, o campo magnético B0, o comprimento de amortecimento da onda L0, seu fluxo f0, entre outros. Sendo assim, aumentando f0 de 10% a partir de valores de referência, vimos que aumenta consideravelmente, enquanto que um aumento de mesmo valor em r0, B0 e L0 acarreta uma diminuição em .

47 CFR 76.41 - Franchise application process.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false Franchise application process. 76.41 Section 76... MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Cable Franchise Applications § 76.41 Franchise application process. (a) Definition. Competitive franchise applicant. For the purpose of this section, an applicant...

Sludge valorization from wastewater treatment plant to its application on the ceramic industry.

PubMed

Martínez-García, C; Eliche-Quesada, D; Pérez-Villarejo, L; Iglesias-Godino, F J; Corpas-Iglesias, F A

2012-03-01

The main aim of this study is to assess the effect of incorporating waste sludge on the properties and microstructure of clay used for bricks manufacturing. Wastewater treatment plants produce annually a great volume of sludge. Replacing clay in a ceramic body with different proportions of sludge can reduce the cost due to the utilization of waste and, at the same time, it can help to solve an environmental problem. Compositions were prepared with additions of 1%, 2.5%, 5%, 7.5%, 10% and 15% wt% waste sludge in body clay. In order to determine the technological properties, such as bulk density, linear shrinkage, water suction, water absorption and compressive strength, press-moulded bodies were fired at 950 °C for coherently bonding particles in order to enhance the strength and the other engineering properties of the compacted particles. Thermal heating destroys organic remainder and stabilizes inorganic materials and metals by incorporating oxides from the elemental constituent into a ceramic-like material. Results have shown that incorporating up to 5 wt% of sludge is beneficial for clay bricks. By contrast, the incorporation of sludge amounts over 5 wt% causes deterioration on the mechanical properties, therefore producing low-quality bricks. Copyright © 2011 Elsevier Ltd. All rights reserved.

Lipophilic extracts from banana fruit residues: a source of valuable phytosterols.

PubMed

Oliveira, Lúcia; Freire, Carmen S R; Silvestre, Armando J D; Cordeiro, Nereida

2008-10-22

The chemical composition of the lipophilic extracts of unripe pulp and peel of banana fruit 'Dwarf Cavendish' was studied by gas chromatography-mass spectrometry. Fatty acids, sterols, and steryl esters are the major families of lipophilic components present in banana tissues, followed by diacylglycerols, steryl glucosides, long chain fatty alcohols, and aromatic compounds. Fatty acids are more abundant in the banana pulp (29-90% of the total amount of lipophilic extract), with linoleic, linolenic, and oleic acids as the major compounds of this family. In banana peel, sterols represent about 49-71% of the lipophilic extract with two triterpenic ketones (31-norcyclolaudenone and cycloeucalenone) as the major components. The detection of high amounts of steryl esters (469-24405 mg/kg) and diacylglycerols (119-878 mg/kg), mainly present in the banana peel extract, explains the increase in the abundance of fatty acids and sterols after alkaline hydrolysis. Several steryl glucosides were also found in significative amounts (273-888 mg/kg), particularly in banana pulp (888 mg/kg). The high content of sterols (and their derivatives) in the 'Dwarf Cavendish' fruit can open new strategies for the valorization of the banana residues as a potential source of high-value phytochemicals with nutraceutical and functional food additive applications.

Production of Laccase by Recombinant Yarrowia lipolytica from Molasses: Bioprocess Development Using Statistical Modeling and Increase Productivity in Shake-Flask and Bioreactor Cultures.

PubMed

Darvishi, Farshad; Moradi, Marzieh; Madzak, Catherine; Jolivalt, Claude

2017-03-01

Laccases are used in numerous applications, from green degradation of various xenobiotic compounds, waste detoxification, textile dye bleaching, and delignification of lignocellulose materials to biofuel production. In this study, the recombinant Yarrowia lipolytica YL4 strain carrying the white-rot fungus Trametes versicolor laccase IIIb gene was used for laccase production from beet molasses as an agro-industrial residue. Response surface methodology was used to statistical optimization of the production of laccase by Y. lipolytica using an industrial medium containing molasses which allows a six times increase in laccase activity compared to primary medium contains glucose after 144 h. In bioreactor cultivation after 48 h, laccase production reached to 3.7- and 22.5-fold more than optimized and primary media in shake-flask cultures, respectively. Laccase productivity in bioreactor (0.0937 U/h) was higher than shake-flask culture (0.0084 U/h). The present study provides valuable information about statistical optimization of bioprocess development for cost-effective production of laccase and other heterologous proteins in Y. lipolytica from beet molasses as sole carbon source, thus allowing the valorization and decreasing environmental pollution of this agro-industrial waste.

Species diversity, community dynamics, and metabolite kinetics of spontaneous leek fermentations.

PubMed

Wouters, D; Bernaert, N; Conjaerts, W; Van Droogenbroeck, B; De Loose, M; De Vuyst, L

2013-04-01

Leek (Allium ampeloprasum var. porrum) is one of Belgium's most important vegetables. All or part of the green leek parts are often left on the fields because of their limited cooking applications compared to the white leek parts. Therefore, the possibility to perform leek fermentations in view of product valorization and diversification was investigated. This study deals with the community dynamics, species diversity, and metabolite kinetics of spontaneous leek fermentations, thereby studying the influence of added NaCl concentration, harvesting season, and duration of the fermentation. The combination of a culture-dependent and culture-independent approach revealed the prevalence of lactic acid bacteria (LAB) from the third day of fermentation onwards, which was not influenced by the fermentation conditions applied. Enterobacteriaceae, Pseudomonadaceae, and yeasts disappeared after one week of fermentation. Leuconostoc mesenteroides, Lactobacillus sakei, and Lactobacillus plantarum, Lactobacillus brevis, and Lactobacillus parabrevis were the most frequently isolated LAB species. Both added NaCl concentrations were suitable to perform successful fermentations within three weeks. By that time, glucose and fructose, the main leek carbohydrates, were metabolized into mainly lactic acid, acetic acid, ethanol, and mannitol. A sensory analysis revealed that the fermented white leek parts were generally more appreciated than the fermented green leek parts. Copyright © 2012 Elsevier Ltd. All rights reserved.

Protein Bread Fortification with Cumin and Caraway Seeds and By-Product Flour.

PubMed

Sayed Ahmad, Bouchra; Talou, Thierry; Straumite, Evita; Sabovics, Martins; Kruma, Zanda; Saad, Zeinab; Hijazi, Akram; Merah, Othmane

2018-02-25

Malnutrition continues to be a key health problem in developing regions. The valorization of food waste appears as an ideal way to prevent malnutrition and improve people's access to food. Cumin ( Cuminum cyminum L.) and caraway ( Carum carvi L.) oilseeds are commonly used for cuisine and medicinal purposes. However, remaining cakes after oil extraction are usually underutilized. In order to assess the usefulness of these by-products in food applications, this study investigated the effect of their addition to protein bread formulations. Different levels (2, 4 and 6%) of whole seeds and cakes flour were used in the study. Fortified protein bread samples were compared to control protein bread and evaluated for their sensory, color, moisture, hardness properties, nutritional values as well as their biological activity. Results indicated that bread fortification shows a significant effect on bread properties depending on fortification level. A higher acceptability was observed specially for bread fortified with by-products flour. Increased tendencies of color darkness, moisture content, bread hardness, nutritional values as well as total phenolic content and radical scavenging activity compared to control bread were observed as the percentage of fortification increased in both cases. The overall results showed that the addition of cumin and caraway seeds and by-product flour can improve the antioxidant potential and overall quality of protein bread.

12 CFR 303.22 - Processing.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Insurance § 303.22 Processing. (a) Expedited processing for proposed institutions. (1) An application for... depository institutions. The FDIC may remove an application from expedited processing for any of the reasons... application within 60 days of receipt of a substantially complete application or 5 days after the expiration...

46 CFR 67.142 - Penalties.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Documentation; Mortgagee Consent; Validation § 67.142 Penalties. (a) An owner or operator of a vessel with a... fact during the application process for or application process to renew a fishery endorsement of the... information or knowingly conceals a material fact during the application process for or application process to...

46 CFR 67.142 - Penalties.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Documentation; Mortgagee Consent; Validation § 67.142 Penalties. (a) An owner or operator of a vessel with a... fact during the application process for or application process to renew a fishery endorsement of the... information or knowingly conceals a material fact during the application process for or application process to...

46 CFR 67.142 - Penalties.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Documentation; Mortgagee Consent; Validation § 67.142 Penalties. (a) An owner or operator of a vessel with a... fact during the application process for or application process to renew a fishery endorsement of the... information or knowingly conceals a material fact during the application process for or application process to...

46 CFR 67.142 - Penalties.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Documentation; Mortgagee Consent; Validation § 67.142 Penalties. (a) An owner or operator of a vessel with a... fact during the application process for or application process to renew a fishery endorsement of the... information or knowingly conceals a material fact during the application process for or application process to...

46 CFR 67.142 - Penalties.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Documentation; Mortgagee Consent; Validation § 67.142 Penalties. (a) An owner or operator of a vessel with a... fact during the application process for or application process to renew a fishery endorsement of the... information or knowingly conceals a material fact during the application process for or application process to...

The Perception and Costs of the Interview Process for Plastic Surgery Residency Programs: Can the Process Be Streamlined?

PubMed

Susarla, Srinivas M; Swanson, Edward W; Slezak, Sheri; Lifchez, Scott D; Redett, Richard J

2017-01-01

The purpose of this study was to assess applicant perceptions and costs associated with the interview process for plastic surgery residency positions. This was a cross-sectional survey of applicants to the integrated- and independent-track residencies at the authors' institution. All applicants who were interviewed were invited to complete a Web-based survey on costs and perceptions of various components of the interview process. Descriptive and bivariate statistics were computed to compare applicants to the two program tracks. Fifty-three applicants were interviewed for residency positions; 48 completed a survey (90.5 percent response rate). Thirty-four applicants were candidates for the integrated program; 16 applicants were candidates for the independent program. The program spent $2763 per applicant interviewed; 63 percent of applicants spent more than $5000 on the interview process. More than 70 percent of applicants missed more than 7 days of work to attend interviews. Independent applicants felt less strongly that interviews were critical to the selection process and placed less value on physically visiting the hospital and direct, in-person interaction. Applicants placed little value on program informational talks. Applicants who had experience with virtual interviews felt more positively about the format of a video interview relative to those who did not. The residency interview process is resource intensive for programs and applicants. Removing informational talks may improve the process. Making physical tours and in-person interviews optional are other alternatives that merit future study.

40 CFR 408.140 - Applicability; description of the tuna processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 29 2011-07-01 2009-07-01 true Applicability; description of the tuna... Tuna Processing Subcategory § 408.140 Applicability; description of the tuna processing subcategory. The provisions of this subpart are applicable to discharges resulting from the processing of tuna. [40...

40 CFR 408.140 - Applicability; description of the tuna processing subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 30 2012-07-01 2012-07-01 false Applicability; description of the tuna... Tuna Processing Subcategory § 408.140 Applicability; description of the tuna processing subcategory. The provisions of this subpart are applicable to discharges resulting from the processing of tuna. [40...

40 CFR 408.140 - Applicability; description of the tuna processing subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 30 2013-07-01 2012-07-01 true Applicability; description of the tuna... Tuna Processing Subcategory § 408.140 Applicability; description of the tuna processing subcategory. The provisions of this subpart are applicable to discharges resulting from the processing of tuna. [40...

40 CFR 408.140 - Applicability; description of the tuna processing subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 29 2014-07-01 2012-07-01 true Applicability; description of the tuna... Tuna Processing Subcategory § 408.140 Applicability; description of the tuna processing subcategory. The provisions of this subpart are applicable to discharges resulting from the processing of tuna. [40...

40 CFR 408.140 - Applicability; description of the tuna processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the tuna... Tuna Processing Subcategory § 408.140 Applicability; description of the tuna processing subcategory. The provisions of this subpart are applicable to discharges resulting from the processing of tuna. [40...

8 CFR 204.3 - Orphan cases under section 101(b)(1)(F) of the Act (non-Convention cases).

Code of Federal Regulations, 2013 CFR

2013-01-01

... advanced processing application (or the advanced processing application concurrently with the orphan... home study preparer and/or fingerprint check. Advanced processing application means Form I-600A (Application for Advanced Processing of Orphan Petition) completed in accordance with the form's instructions...

8 CFR 204.3 - Orphan cases under section 101(b)(1)(F) of the Act (non-Convention cases).

Code of Federal Regulations, 2010 CFR

2010-01-01

... advanced processing application (or the advanced processing application concurrently with the orphan... home study preparer and/or fingerprint check. Advanced processing application means Form I-600A (Application for Advanced Processing of Orphan Petition) completed in accordance with the form's instructions...

8 CFR 204.3 - Orphan cases under section 101(b)(1)(F) of the Act (non-Convention cases).

Code of Federal Regulations, 2014 CFR

2014-01-01

... advanced processing application (or the advanced processing application concurrently with the orphan... home study preparer and/or fingerprint check. Advanced processing application means Form I-600A (Application for Advanced Processing of Orphan Petition) completed in accordance with the form's instructions...

8 CFR 204.3 - Orphan cases under section 101(b)(1)(F) of the Act (non-Convention cases).

Code of Federal Regulations, 2011 CFR

2011-01-01

... advanced processing application (or the advanced processing application concurrently with the orphan... home study preparer and/or fingerprint check. Advanced processing application means Form I-600A (Application for Advanced Processing of Orphan Petition) completed in accordance with the form's instructions...

8 CFR 204.3 - Orphan cases under section 101(b)(1)(F) of the Act (non-Convention cases).

Code of Federal Regulations, 2012 CFR

2012-01-01

... advanced processing application (or the advanced processing application concurrently with the orphan... home study preparer and/or fingerprint check. Advanced processing application means Form I-600A (Application for Advanced Processing of Orphan Petition) completed in accordance with the form's instructions...

40 CFR 130.15 - Processing application for Indian tribes.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 22 2014-07-01 2013-07-01 true Processing application for Indian... PROGRAMS WATER QUALITY PLANNING AND MANAGEMENT § 130.15 Processing application for Indian tribes. The Regional Administrator shall process an application of an Indian Tribe submitted under § 130.6(d) in a...

40 CFR 130.15 - Processing application for Indian tribes.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 22 2011-07-01 2011-07-01 false Processing application for Indian... PROGRAMS WATER QUALITY PLANNING AND MANAGEMENT § 130.15 Processing application for Indian tribes. The Regional Administrator shall process an application of an Indian Tribe submitted under § 130.6(d) in a...

40 CFR 130.15 - Processing application for Indian tribes.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 23 2012-07-01 2012-07-01 false Processing application for Indian... PROGRAMS WATER QUALITY PLANNING AND MANAGEMENT § 130.15 Processing application for Indian tribes. The Regional Administrator shall process an application of an Indian Tribe submitted under § 130.6(d) in a...

40 CFR 130.15 - Processing application for Indian tribes.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 23 2013-07-01 2013-07-01 false Processing application for Indian... PROGRAMS WATER QUALITY PLANNING AND MANAGEMENT § 130.15 Processing application for Indian tribes. The Regional Administrator shall process an application of an Indian Tribe submitted under § 130.6(d) in a...

75 FR 71376 - Simplified Network Application Processing System, On-Line Registration and Account Maintenance

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-23

...-02] RIN 0694-AE98 Simplified Network Application Processing System, On-Line Registration and Account...'') electronically via BIS's Simplified Network Application Processing (SNAP-R) system. Currently, parties must... Network Applications Processing System (SNAP-R) in October 2006. The SNAP-R system provides a Web based...

NASA GSFC Perspective on Heterogeneous Processing

NASA Technical Reports Server (NTRS)

Powell, Wesley A.

2016-01-01

This presentation provides an overview of NASA GSFC, our onboard processing applications, the applicability heterogeneous processing to these applications, and necessary developments to enable heterogeneous processing to be infused into our missions.

Gay theatre, AIDS, and taboo: reconsidering Robert Chesley.

PubMed

Gavrila, Rebecca

2013-01-01

Theatre was among the first popular culture forms to address HIV/AIDS and did so memorably in such works as The Normal Heart, As Is, Love! Valor! Compassion!, and March of the Falsettos. As a response to criticisms of stage dramas focusing on HIV/AIDS in the main as undifferentiated and melodramatic, the author suggests critical consideration of two works by playwright Robert Chesley. In her analysis of Night Sweats and Jerker, the author argues Chesley offers an alternative perspective that is both liberatory and sex-positive.

Unpacking disclosure: interrupting unquestioned practices.

PubMed

McDonald, Carol

2008-06-01

Disclosure, the social practice of sharing the details, the "truths" of one's life, is embedded in our social world, and in the assumptions that drive the provision of mental health and psychotherapeutic intervention. In this paper the author interrogates the ways in which categories of sexuality and disclosure itself is historically derived and asks: How would care be different if we consider the constructed categories of sexual orientation as an exemplar of an unstable truth? In addition, the author suggests approaches to practice that unseat the valorization of disclosure.

Valorisation of softwood bark through extraction of utilizable chemicals. A review.

PubMed

Jablonsky, M; Nosalova, J; Sladkova, A; Haz, A; Kreps, F; Valka, J; Miertus, S; Frecer, V; Ondrejovic, M; Sima, J; Surina, I

2017-11-01

Softwood bark is an important source for producing chemicals and materials as well as bioenergy. Extraction is regarded as a key technology for obtaining chemicals in general, and valorizing bark as a source of such chemicals in particular. In this paper, properties of 237 compounds identified in various studies dealing with extraction of softwood bark were described. Finally, some challenges and perspectives on the production of chemicals from bark are discussed. Copyright © 2017 Elsevier Inc. All rights reserved.

Project VALOR: Trajectories of Change in PTSD in Combat-Exposed Veterans

DTIC Science & Technology

2017-10-01

Implications for ICD–11. Journal Of Abnormal Psychology , 126(3), 355- 366. doi:10.1037/abn0000252 PRESENTATIONS Black, S.K., Harwell, A.M., Klein, A.B...mental health in a nationally representative sample of U.S. OEF/OIF veterans. Journal of Abnormal Psychology , 120, 797– 806. http://dx .doi.org...Marx, 150 South Huntington Avenue (116B-3), Boston, MA 02130. E-mail: Karen.Mitchell5@va.gov or Brian.Marx@va.gov Journal of Abnormal Psychology In

Que Tal la Justicia Social en los Alumnos de la UIA (Universidad Iberoamericana)? Investigacion sobre los Logros en la Formacion Valoral (What about Social Justice among the Students of the Iberoamerican University? Survey on the Achievements in the Acquisition of Values).

ERIC Educational Resources Information Center

Bazdresch Parada, Juan E.

This survey investigates how the students of social philosophy modify their criteria on basic questions of social justice. A questionnaire of 30 questions, with 5 options, was developed. The five answer/options correspond to the following five schools of social philosophy (five ways of thinking): (1) liberal individualism; (2) humanitarianism; (3)…

For Valor or Value: An Examination of Personnel Recovery Operations

DTIC Science & Technology

2001-06-01

Flight. Basher 52 On 2 June 1995, a US F-16C call sign Basher 52, flown by Captain Scott O’ Grady was shot down by a Bosnian Serb SA-6.103...There was no voice or visual contact with Basher 52 and NATO received unconfirmed reports that the Bosnian Serb Army had recovered O’ Grady.104 For the...next six days, O’ Grady evaded capture. For the two years preceding the shoot down of Basher 52, the 21st Special Operations Squadron (SOS) had

Mexico’s Central American Policy: Apologies, Motivations, and Principles.

DTIC Science & Technology

1982-03-15

Entre Mdxico y Nicaragua," El Mercado de Valores. May 18, 1981, p. 510. 14. See Errol D. Jones and David LaFrance, "Mexico’s Foreign Affairs Under...Medina Luna, "Proyecci6n de Mixico sobre Centroamerica," in Centro de Estudios Internacionales, Mexico y America Latina: La Neuva Poliica Exterior, Mdxico...p. 18. 21. The quotation is from Bryan, p. 36. For the text of the petroleum agreement, see "Programa de Cooperaci6n Energitica," El Mercado de

Project VALOR: Trajectories of Change in PTSD in Combat Exposed Veterans

DTIC Science & Technology

2016-10-01

comparison of DSM-5 and ICD-11. Poster to be presented at the Association for Behavioral and Cognitive Therapy 50th Annual Meeting. New York, NY. Black, S...Behavioral and Cognitive Therapies 49th Annual Meeting. Chicago, IL. Black, S. K., Erb, S. Bovin, M. J., Green, J., Marx, B. P., Rosen, R. C., & Keane, T...for Behavioral and Cognitive Therapies 49th Annual Meeting. Chicago, IL. Erb, S., Kearns, J., Bovin, M. J., Black, S., Annunziata, A., & Marx, B. P

Commemorating the 70th anniversary and commending the brave men of the 17th Bombardment Group (Medium) who became known as the "Doolittle Tokyo Raiders" for outstanding heroism, valor, skill, and service to the United States in conducting the bombing of Tokyo on April 18, 1942.

THOMAS, 112th Congress

Sen. Brown, Sherrod [D-OH

2012-04-16

Senate - 08/02/2012 Resolution agreed to in Senate with an amendment and an amendment to the Title and an amended preamble by Unanimous Consent. (All Actions) Tracker: This bill has the status Agreed to in SenateHere are the steps for Status of Legislation:

Structural differences between alcoholic and diabetic parotid sialosis.

PubMed

Carda, Carmen; Carranza, Miriam; Arriaga, Adriana; Díaz, Anselmo; Peydró, Amando; Gomez de Ferraris, Maria Elsa

2005-01-01

Between the sialosis' etiologic agents, we can find the chronic alcoholism and diabetes. Both nosologic entities are described using a similar histopathologic pattern. The purpose of this work has been analyzing and comparing the histopathological differences between the diabetic and alcoholic sialosis. We studied 7 parotid glands samples of diabetic patients and 4 samples of normal glands obtained from surgical material were used as a control. For the comparative study, we used 12 parotid glands from chronic alcoholic patients with clinical diagnosis of cirrhosis and 6 autopsies on individuals who had died from alcoholic hepatic cirrhosis. This material was fixed in formaline, processed for embedding in paraffin, standard coloration techniques and immunotechnique for cytokeratin EA/1 y EA/3. In the cases of diabetics, the parotid gland was characterised by the presence of small acini, a bigger number of lipid intracytoplasmic droplets in the acinar and ductal cells, as well as an abundant adipose infiltration in the stroma when compared to the alcoholics. We observed that the cytokeratins' expression was heterogeneous at the acinar level, and very positive in the hyperplasic ducts, compared to the alcoholic and control groups. These qualitative valorations indicate the differences between the histopathologic pattern of sialosis with different origins.

A new approach for concurrently improving performance of South Korean food waste valorization and renewable energy recovery via dry anaerobic digestion under mesophilic and thermophilic conditions.

PubMed

Nguyen, Dinh Duc; Yeop, Jeong Seong; Choi, Jaehoon; Kim, Sungsu; Chang, Soon Woong; Jeon, Byong-Hun; Guo, Wenshan; Ngo, Huu Hao

2017-08-01

Dry semicontinuous anaerobic digestion (AD) of South Korean food waste (FW) under four solid loading rates (SLRs) (2.30-9.21kg total solids (TS)/m 3 day) and at a fixed TS content was compared between two digesters, one each under mesophilic and thermophilic conditions. Biogas production and organic matter reduction in both digesters followed similar trends, increasing with rising SLR. Inhibitor (intermediate products of the anaerobic fermentation process) effects on the digesters' performance were not observed under the studied conditions. In all cases tested, the digesters' best performance was achieved at the SLR of 9.21kg TS/m 3 day, with 74.02% and 80.98% reduction of volatile solids (VS), 0.87 and 0.90m 3 biogas/kg VS removed , and 0.65 (65% CH 4 ) and 0.73 (60.02% CH 4 ) m 3 biogas/kg VS fed , under mesophilic and thermophilic conditions, respectively. Thermophilic dry AD is recommended for FW treatment in South Korea because it is more efficient and has higher energy recovery potential when compared to mesophilic dry AD. Copyright © 2017 Elsevier Ltd. All rights reserved.

Comparative assessment of municipal sewage sludge incineration, gasification and pyrolysis for a sustainable sludge-to-energy management in Greece

DOE Office of Scientific and Technical Information (OSTI.GOV)

Samolada, M.C.; Zabaniotou, A.A., E-mail: azampani@auth.gr

2014-02-15

Highlights: • The high output of MSS highlights the need for alternative routes of valorization. • Evaluation of 3 sludge-to-energy valorisation methods through SWOT analysis. • Pyrolysis is an energy and material recovery process resulting to ‘zero waste’. • Identification of challenges and barriers for MSS pyrolysis in Greece was investigated. • Adopters of pyrolysis systems face the challenge of finding new product markets. - Abstract: For a sustainable municipal sewage sludge management, not only the available technology, but also other parameters, such as policy regulations and socio-economic issues should be taken in account. In this study, the current statusmore » of both European and Greek Legislation on waste management, with a special insight in municipal sewage sludge, is presented. A SWOT analysis was further developed for comparison of pyrolysis with incineration and gasification and results are presented. Pyrolysis seems to be the optimal thermochemical treatment option compared to incineration and gasification. Sewage sludge pyrolysis is favorable for energy savings, material recovery and high added materials production, providing a ‘zero waste’ solution. Finally, identification of challenges and barriers for sewage sludge pyrolysis deployment in Greece was investigated.« less

Production of FucoPol by Enterobacter A47 using waste tomato paste by-product as sole carbon source.

PubMed

Antunes, Sílvia; Freitas, Filomena; Sevrin, Chantal; Grandfils, Christian; Reis, Maria A M

2017-03-01

Out-of-specification tomato paste, a by-product from the tomato processing industry, was used as the sole substrate for cultivation of the bacterium Enterobacter A47 and production of FucoPol, a value-added fucose-rich extracellular polysaccharide. Among the different tested fed-batch strategies, pH-stat, DO-stat and continuous substrate feeding, the highest production (8.77gL -1 ) and overall volumetric productivity (2.92gL -1 d -1 ) were obtained with continuous substrate feeding at a constant flow rate of 11gh -1 . The polymer produced had the typical FucoPol composition (37mol% fucose, 27mol% galactose, 23mol% glucose and 12mol% glucuronic acid, with an acyl groups content of 13wt%). The average molecular weight was 4.4×10 6 Da and the polydispersity index was 1.2. This study demonstrated that out-of-specification tomato paste is a suitable low-cost substrate for the production of FucoPol, thus providing a route for the valorization of this by-product into a high-value microbial product. Copyright © 2016 Elsevier Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swain, Basudev, E-mail: swain@iae.re.kr; Mishra, Chinmayee; Hong, Hyun Seon

Sustainable valorization processes for selective recovery of pure copper nanopowder from Indium-Tin-Oxide (ITO) etching wastewater by various wet chemical reduction processes, their chemistry has been investigated and compared. After the indium recovery by solvent extraction from ITO etching wastewater, the same is also an environmental challenge, needs to be treated before disposal. After the indium recovery, ITO etching wastewater contains 6.11 kg/m{sup 3} of copper and 1.35 kg/m{sup 3} of aluminum, pH of the solution is very low converging to 0 and contain a significant amount of chlorine in the media. In this study, pure copper nanopowder was recovered usingmore » various reducing reagents by wet chemical reduction and characterized. Different reducing agents like a metallic, an inorganic acid and an organic acid were used to understand reduction behavior of copper in the presence of aluminum in a strong chloride medium of the ITO etching wastewater. The effect of a polymer surfactant Polyvinylpyrrolidone (PVP), which was included to prevent aggregation, to provide dispersion stability and control the size of copper nanopowder was investigated and compared. The developed copper nanopowder recovery techniques are techno-economical feasible processes for commercial production of copper nanopowder in the range of 100–500 nm size from the reported facilities through a one-pot synthesis. By all the process reported pure copper nanopowder can be recovered with>99% efficiency. After the copper recovery, copper concentration in the wastewater reduced to acceptable limit recommended by WHO for wastewater disposal. The process is not only beneficial for recycling of copper, but also helps to address environment challenged posed by ITO etching wastewater. From a complex wastewater, synthesis of pure copper nanopowder using various wet chemical reduction route and their comparison is the novelty of this recovery process. - Highlights: • From the Indium-Tin-Oxide etching wastewater, copper nanopowder was synthesized. • Solution chemistry of ITO etching wastewater is addressed. • A techno-economical feasible, environment friendly and occupational safe process. • Brings back the material to production stream and address the circular economy. • A cradle to cradle technology management lowers the futuristic carbon economy.« less

Base-Catalyzed Depolymerization of Solid Lignin-Rich Streams Enables Microbial Conversion

DOE PAGES

Rodriguez, Alberto; Salvachúa, Davinia; Katahira, Rui; ...

2017-08-01

Lignin valorization offers significant potential to enhance the economic viability of lignocellulosic biorefineries. However, because of its heterogeneous and recalcitrant nature, conversion of lignin to value-added coproducts remains a considerable technical challenge. Here, we employ base-catalyzed depolymerization (BCD) using a process-relevant solid lignin stream produced via deacetylation, mechanical refining, and enzymatic hydrolysis to enable biological lignin conversion. BCD was conducted with the solid lignin substrate over a range of temperatures at two NaOH concentrations, and the results demonstrate that the lignin can be partially extracted and saponified at temperatures as low as 60 degrees C. At 120 °C and 2%more » NaOH, the high extent of lignin solubility was accompanied by a considerable decrease in the lignin average molecular weight and the release of lignin-derived monomers including hydroxycinnamic acids. BCD liquors were tested for microbial growth using seven aromatic-catabolizing bacteria and two yeasts. Three organisms (Pseudomonas putida KT2440, Rhodotorula mucilaginosa, and Corynebacterium glutamicum) tolerate high BCD liquor concentrations (up to 90% v/v) and rapidly consume the main lignin-derived monomers, resulting in lignin conversion of up to 15%. Furthermore, as a proof of concept, muconic acid production from a representative lignin BCD liquor was demonstrated with an engineered P. putida KT2440 strain. Our results highlight the potential for a mild lignin depolymerization process to enhance the microbial conversion of solid lignin-rich biorefinery streams.« less

Base-Catalyzed Depolymerization of Solid Lignin-Rich Streams Enables Microbial Conversion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rodriguez, Alberto; Salvachúa, Davinia; Katahira, Rui

Lignin valorization offers significant potential to enhance the economic viability of lignocellulosic biorefineries. However, because of its heterogeneous and recalcitrant nature, conversion of lignin to value-added coproducts remains a considerable technical challenge. Here, we employ base-catalyzed depolymerization (BCD) using a process-relevant solid lignin stream produced via deacetylation, mechanical refining, and enzymatic hydrolysis to enable biological lignin conversion. BCD was conducted with the solid lignin substrate over a range of temperatures at two NaOH concentrations, and the results demonstrate that the lignin can be partially extracted and saponified at temperatures as low as 60 degrees C. At 120 °C and 2%more » NaOH, the high extent of lignin solubility was accompanied by a considerable decrease in the lignin average molecular weight and the release of lignin-derived monomers including hydroxycinnamic acids. BCD liquors were tested for microbial growth using seven aromatic-catabolizing bacteria and two yeasts. Three organisms (Pseudomonas putida KT2440, Rhodotorula mucilaginosa, and Corynebacterium glutamicum) tolerate high BCD liquor concentrations (up to 90% v/v) and rapidly consume the main lignin-derived monomers, resulting in lignin conversion of up to 15%. Furthermore, as a proof of concept, muconic acid production from a representative lignin BCD liquor was demonstrated with an engineered P. putida KT2440 strain. Our results highlight the potential for a mild lignin depolymerization process to enhance the microbial conversion of solid lignin-rich biorefinery streams.« less

Biodiesel biorefinery: opportunities and challenges for microbial production of fuels and chemicals from glycerol waste.

PubMed

Almeida, João R M; Fávaro, Léia C L; Quirino, Betania F

2012-07-18

The considerable increase in biodiesel production worldwide in the last 5 years resulted in a stoichiometric increased coproduction of crude glycerol. As an excess of crude glycerol has been produced, its value on market was reduced and it is becoming a "waste-stream" instead of a valuable "coproduct". The development of biorefineries, i.e. production of chemicals and power integrated with conversion processes of biomass into biofuels, has been singled out as a way to achieve economically viable production chains, valorize residues and coproducts, and reduce industrial waste disposal. In this sense, several alternatives aimed at the use of crude glycerol to produce fuels and chemicals by microbial fermentation have been evaluated. This review summarizes different strategies employed to produce biofuels and chemicals (1,3-propanediol, 2,3-butanediol, ethanol, n-butanol, organic acids, polyols and others) by microbial fermentation of glycerol. Initially, the industrial use of each chemical is briefly presented; then we systematically summarize and discuss the different strategies to produce each chemical, including selection and genetic engineering of producers, and optimization of process conditions to improve yield and productivity. Finally, the impact of the developments obtained until now are placed in perspective and opportunities and challenges for using crude glycerol to the development of biodiesel-based biorefineries are considered. In conclusion, the microbial fermentation of glycerol represents a remarkable alternative to add value to the biodiesel production chain helping the development of biorefineries, which will allow this biofuel to be more competitive.