Quality-by-Design (QbD): An integrated process analytical technology (PAT) approach for a dynamic pharmaceutical co-precipitation process characterization and process design space development.

PubMed

Wu, Huiquan; White, Maury; Khan, Mansoor A

2011-02-28

The aim of this work was to develop an integrated process analytical technology (PAT) approach for a dynamic pharmaceutical co-precipitation process characterization and design space development. A dynamic co-precipitation process by gradually introducing water to the ternary system of naproxen-Eudragit L100-alcohol was monitored at real-time in situ via Lasentec FBRM and PVM. 3D map of count-time-chord length revealed three distinguishable process stages: incubation, transition, and steady-state. The effects of high risk process variables (slurry temperature, stirring rate, and water addition rate) on both derived co-precipitation process rates and final chord-length-distribution were evaluated systematically using a 3(3) full factorial design. Critical process variables were identified via ANOVA for both transition and steady state. General linear models (GLM) were then used for parameter estimation for each critical variable. Clear trends about effects of each critical variable during transition and steady state were found by GLM and were interpreted using fundamental process principles and Nyvlt's transfer model. Neural network models were able to link process variables with response variables at transition and steady state with R(2) of 0.88-0.98. PVM images evidenced nucleation and crystal growth. Contour plots illustrated design space via critical process variables' ranges. It demonstrated the utility of integrated PAT approach for QbD development. Published by Elsevier B.V.

Considerations when using variable frequency drive technology for pond aquculture

USDA-ARS?s Scientific Manuscript database

Some farmers have decided to use variable frequency drives (VFDs) to control pump speed and water flow rate to reduce operational cost and costs associated with repairs and maintenance. Mixed performance issues with VFDs and electric motors have been reported. Examples include frequent drive failure...

Shape Morphing Adaptive Radiator Technology (SMART) for Variable Heat Rejection

NASA Technical Reports Server (NTRS)

Erickson, Lisa

2016-01-01

The proposed technology leverages the temperature dependent phase change of shape memory alloys (SMAs) to drive the shape of a flexible radiator panel. The opening/closing of the radiator panel, as a function of temperature, passively adapts the radiator's rate of heat rejection in response to a vehicle's needs.

New Zealand Management Students' Perceptions of Communication Technologies in Correspondence Education.

ERIC Educational Resources Information Center

Ostman, Ronald E.; Wagner, Graham A.

1987-01-01

Describes a survey of 724 management students in New Zealand's Technical Correspondence Institute which was conducted to determine whether the introduction of educational technologies could decrease the dropout rate. The multiple linear regression model that was used to analyze the questionnaire responses is presented, and predictor variables are…

A Comparative Evaluation of the Effects of the Implementation of the Production Oriented Maintenance Organization (POMO) on Aircraft Maintenance

DTIC Science & Technology

1978-09-01

Division AREA & WORK UNIT NUMBERS School of Systems and Logistics’ Air Force Institute of Technology,WPAFB,OH II. CONTROLLING OFFICE NAME AND ADDRESS 12 ...STRUCTURE) ............. ................ 9) 12 . SUMMARY OF ALL ANALYSIS RESUILT,"S ........ ........ 94 vii i LIST OF FIGURES Figure Page 1. Deputy...ness Rate (Variable 4) .... ............ ... 81 12 . Graph of Data Values for Abort Rate (Variable 5 e) . ..................... 82 13. Graph of Data

Quantifying the Impact of Technological Trends and Spatiotemporal Variability in Hydraulic Fracturing Water Intensity

NASA Astrophysics Data System (ADS)

Montgomery, J.; O'sullivan, F.

2016-12-01

An important metric for comparing the environmental impact of hydraulically fractured oil and gas wells to other energy technologies is the water intensity, or water usage normalized to energy production. Due to varying hydraulic fracturing practices, immense variability in short-term well performance, and uncertainty about lifetime production from wells, the water intensity of wells is difficult to predict and should be modeled statistically using field data. We analyzed public production and hydraulic fracturing data for 3497 wells drilled in the North Dakota Williston Basin between 2012 and 2015 to identify technology and sweet-spotting trends and identify their impact on well productivity and water intensity. We found that the water used per well increased by an average of 43% per year over this period while the water intensity of wells increased by 32% per year. The difference in these rates was due to a trend of increasing production rates, which we found to be associated equally with changes in technology and sweet-spotting. The prevalent role of sweet spotting means that as future drilling activity shifts into less productive areas than are presently being exploited, this will predictably increase the water intensity of new wells. Although some of the variability in well productivity and water intensity is resolvable to the influence of spatial heterogeneity and technology practices, a substantial amount of uncertainty is irreducible due to unobservable factors. This uncertainty can best be represented and updated with new information, such as initial rates of production, using a Bayesian decline curve model. We demonstrate how this approach can be used to forecast uncertainty of water intensity at different locations and points in time, making it a useful tool for a range of stakeholders, including regulatory agencies assessing the environmental impact of drilling activity within particular watersheds.

Current status and future directions of precision aerial application for site-specific crop management in the USA

USDA-ARS?s Scientific Manuscript database

The first variable-rate aerial application system was developed about a decade ago in the USA and since then, aerial application has benefitted from these technologies. Many areas of the United States rely on readily available agricultural airplanes or helicopters for pest management, and variable-...

R&D of a Next Generation LEO System for Global Multimedia Mobile Satellite Communications

NASA Astrophysics Data System (ADS)

Morikawa, E.; Motoyoshi, S.; Koyama, Y.; Suzuki, R.; Yasuda, Y.

2002-01-01

Next-generation LEO System Research Center (NeLS) was formed in the end of 1997 as a research group under the Telecommunications Advancement Organization of Japan, in cooperation with the telecommunications operators, manufacturers, universities and governmental research organization. The aim of this project is to develop new technology for global multimedia mobile satellite communications services with a user data rate around 2Mbps for handy terminals. component of the IMT-2000, and the second generation of the big-LEO systems. In prosecuting this project, two-phase approach, phase 1 and phase 2, is considered. Phase 1 is the system definition and development of key technologies. In Phase 2, we plan to verify the developed technology in Phase 1 on space. From this year we shifted the stage to Phase 2, and are now developing the prototype of on-board communication systems for flight tests, which will be planed at around 2006. The satellite altitude is assumed to be 1200 km in order to reduce the number of satellites, to avoid the Van Allen radiation belts and to increase the minimum elevation angle. Ten of the circular orbits with 55 degree of inclination are selected to cover the earth surface from -70 to 70 degree in latitude. 12 satellites are positioned at regular intervals in each orbit. In this case, the minimum elevation angle from the user terminal can be keep more than 20 degree for the visibility of the satellite, and 15 degree for simultaneous visibility of two satellites. Then, NeLS Research Center was focusing on the development of key technologies as the phase 1 project. Four kinds of key technologies; DBF satellite antenna, optical inter-satellite link system, satellite network technology with on-board ATM switch and variable rate modulation were selected. Satellite Antenna Technology: Development of on-board direct radiating active phased array antenna with digital beam forming technology would be one of the most important breakthroughs for the satellite communication systems. Therefore, the experimental DBF network with 16 radiating elements was developed for confirming a basic signal processing performance. A/D sampled data are processed by using FPGA circuit for beam forming by real-time basis. Optical Inter-Satellite Link Technology: The inter-satellite link (ISL) technology is also important, because the inter-satellite network is essential to realize the low delay network connection for multimedia services. The optical ISL simulator was developed for the study of optical modem and optical tracking mechanism. And the sensitivity of 56 photons/bit at 10-9 of error rate has been achieved by employing the Erbium doped fiber amplifier, polarizing filter and narrow band optical filter. Coude path type, the active universal joint (AUJ) type and two flat mirror type of optical antenna mechanism were developed. Satellite Network Technology: For constructing this optical ISL ring, the utilization of wavelength division multiplexing (WDM) technology is envisaged. By applying WDM technology to the optical intra-orbital ISL, logical mesh connections can be achieved by assigning the appropriate wavelength for the links among satellites. By using inclined orbit, inter-orbital ISL connection can be keep continuously. Therefore, WDM technology is also applicable to the inter-orbital ISL network. The satellite ATM network simulator was developed in order to investigate the effect of delay fluctuation caused by the satellite constellations. This simulator works as real-time basis by using commercial ATM switches and personal computers. This simulator was installed Dijkstra's algorithm to determine satellite routing path in order to minimize the end-to-end delay time from the source terminal to the destination terminal. The satellite IP network simulator has been developed in order to evaluate the congestion of the multimedia traffic. Variable Rate Modulation Technology: Considering the propagation impairments in the mobile conditions, we employ the variable rate transmission, which maintains the communication service by decreasing the data rate while the user link condition is degraded. CDMA and OFDM techniques are candidates for such a variable rate transmission scheme. In order to study the variable rate modem, the software simulation tools and hardware simulator were prepared. The hardware simulator can generate various kinds of propagation impairments, such as Rayleigh, multi-path, Doppler shift, etc by inputting satellite constellation parameters and fading models. In this paper, we briefly introduce the results of development in Phase 1and a current status in Phase 2.

[Variations among Spanish regions in the use of three cardiovascular technologies].

PubMed

Fitch-Warner, Kathryn; García de Yébenes, María J; Lázaro y de Mercado, Pablo; Belaza-Santurde, Javier

2006-12-01

There is evidence that some geographic variations in the use of medical technologies are not explained by differences in disease burden. The objectives of this study were to quantify variability in the use of percutaneous coronary intervention (PCI), implantable cardioverter-defibrillators (ICDs), and cardiac resynchronization therapy (CRT) in Spanish autonomous regions and to try to explain the variability found for the first two technologies. Linear regression models were developed in which the number of procedures performed per million population (pmp) in 2003 in each autonomous region was the dependent variable. Independent variables used included indices of technology provision, regional wealth, and disease burden. For PCI, the mean utilization rate for the whole of Spain was 1038 procedures pmp, with a high-low ratio of 1.95. Differences in gross domestic product explained 21% of the variability, but there was no relationship between the number of procedures performed and disease burden. For ICDs, the mean number of procedures performed in the whole of Spain was 46 pmp, with a high-low ratio of 3.04. As for PCI, differences in regional wealth explained 40% of the variability, with disease burden making no contribution. For CRT, the mean number of procedures performed in Spain in 2003 was 15 pmp, with a high-low ratio of 15.7. The considerable regional variation that exists in the use of these three medical technologies is principally explained by differences in regional wealth and not in disease burden.

A study of 60 GHz intersatellite link applications

NASA Technical Reports Server (NTRS)

Anzic, G.; Connolly, D. J.; Haugland, E. J.; Kosmahl, H. G.; Chitwood, J. S.

1983-01-01

Applications of intersatellite links operating at 60 GHz are reviewed. Likely scenarios, ranging from transmission of moderate and high data rates over long distances to low data rates over short distances are examined. A limited parametric tradeoff is performed with system variables such as radiofrequency power, receiver noise temperature, link distance, data rate, and antenna size. Present status is discussed and projections are given for both electron tube and solid state transmitter technologies. Monolithic transmit and receive module technology, already under development at 20 to 30 GHz, is reviewed and its extension to 60 GHz, and possible applicability is discussed.

A study of 60 Gigahertz intersatellite link applications

NASA Astrophysics Data System (ADS)

Anzic, G.; Connolly, D. J.; Haugland, E. J.; Kosmahl, H. G.; Chitwood, J. S.

Applications of intersatellite links operating at 60 GHz are reviewed. Likely scenarios, ranging from transmission of moderate and high data rates over long distances to low data rates over short distances are examined. A limited parametric tradeoff is performed with system variables such as radiofrequency power, receiver noise temperature, link distance, data rate, and antenna size. Present status is discussed and projections are given for both electron tube and solid state transmitter technologies. Monolithic transmit and receive module technology, already under development at 20 to 30 GHz, is reviewed and its extension to 60 GHz, and possible applicability is discussed.

A study of 60 Gigahertz intersatellite link applications

NASA Technical Reports Server (NTRS)

Anzic, G.; Connolly, D. J.; Haugland, E. J.; Kosmahl, H. G.; Chitwood, J. S.

1983-01-01

Applications of intersatellite links operating at 60 GHz are reviewed. Likely scenarios, ranging from transmission of moderate and high data rates over long distances to low data rates over short distances are examined. A limited parametric tradeoff is performed with system variables such as radiofrequency power, receiver noise temperature, link distance, data rate, and antenna size. Present status is discussed and projections are given for both electron tube and solid state transmitter technologies. Monolithic transmit and receive module technology, already under development at 20 to 30 GHz, is reviewed and its extension to 60 GHz, and possible applicability is discussed.

A study of 60 GHz intersatellite link applications

NASA Astrophysics Data System (ADS)

Anzic, G.; Connolly, D. J.; Haugland, E. J.; Kosmahl, H. G.; Chitwood, J. S.

Applications of intersatellite links operating at 60 GHz are reviewed. Likely scenarios, ranging from transmission of moderate and high data rates over long distances to low data rates over short distances are examined. A limited parametric tradeoff is performed with system variables such as radiofrequency power, receiver noise temperature, link distance, data rate, and antenna size. Present status is discussed and projections are given for both electron tube and solid state transmitter technologies. Monolithic transmit and receive module technology, already under development at 20 to 30 GHz, is reviewed and its extension to 60 GHz, and possible applicability is discussed.

Flutter suppression and stability analysis for a variable-span wing via morphing technology

NASA Astrophysics Data System (ADS)

Li, Wencheng; Jin, Dongping

2018-01-01

A morphing wing can enhance aerodynamic characteristics and control authority as an alternative to using ailerons. To use morphing technology for flutter suppression, the dynamical behavior and stability of a variable-span wing subjected to the supersonic aerodynamic loads are investigated numerically in this paper. An axially moving cantilever plate is employed to model the variable-span wing, in which the governing equations of motion are established via the Kane method and piston theory. A morphing strategy based on axially moving rates is proposed to suppress the flutter that occurs beyond the critical span length, and the flutter stability is verified by Floquet theory. Furthermore, the transient stability during the morphing motion is analyzed and the upper bound of the morphing rate is obtained. The simulation results indicate that the proposed morphing law, which is varying periodically with a proper amplitude, could accomplish the flutter suppression. Further, the upper bound of the morphing speed decreases rapidly once the span length is close to its critical span length.

Counter-propagation network with variable degree variable step size LMS for single switch typing recognition.

PubMed

Yang, Cheng-Huei; Luo, Ching-Hsing; Yang, Cheng-Hong; Chuang, Li-Yeh

2004-01-01

Morse code is now being harnessed for use in rehabilitation applications of augmentative-alternative communication and assistive technology, including mobility, environmental control and adapted worksite access. In this paper, Morse code is selected as a communication adaptive device for disabled persons who suffer from muscle atrophy, cerebral palsy or other severe handicaps. A stable typing rate is strictly required for Morse code to be effective as a communication tool. This restriction is a major hindrance. Therefore, a switch adaptive automatic recognition method with a high recognition rate is needed. The proposed system combines counter-propagation networks with a variable degree variable step size LMS algorithm. It is divided into five stages: space recognition, tone recognition, learning process, adaptive processing, and character recognition. Statistical analyses demonstrated that the proposed method elicited a better recognition rate in comparison to alternative methods in the literature.

The Sterilization Effect of Cooperative Treatment of High Voltage Electrostatic Field and Variable Frequency Pulsed Electromagnetic Field on Heterotrophic Bacteria in Circulating Cooling Water

NASA Astrophysics Data System (ADS)

Gao, Xuetong; Liu, Zhian; Zhao, Judong

2018-01-01

Compared to other treatment of industrial circulating cooling water in the field of industrial water treatment, high-voltage electrostatic field and variable frequency pulsed electromagnetic field co-sterilization technology, an advanced technology, is widely used because of its special characteristics--low energy consumption, nonpoisonous and environmentally friendly. In order to get a better cooling water sterilization effect under the premise of not polluting the environment, some experiments about sterilization of heterotrophic bacteria in industrial circulating cooling water by cooperative treatment of high voltage electrostatic field and variable frequency pulsed electromagnetic field were carried out. The comparison experiment on the sterilization effect of high-voltage electrostatic field and variable frequency pulsed electromagnetic field co-sterilization on heterotrophic bacteria in industrial circulating cooling water was carried out by change electric field strength and pulse frequency. The results show that the bactericidal rate is selective to the frequency and output voltage, and the heterotrophic bacterium can only kill under the condition of sweep frequency range and output voltage. When the voltage of the high voltage power supply is 4000V, the pulse frequency is 1000Hz and the water temperature is 30°C, the sterilization rate is 48.7%, the sterilization rate is over 90%. Results of this study have important guiding significance for future application of magnetic field sterilization.

An analysis of successful commercialization of federally funded R&D energy technologies

NASA Astrophysics Data System (ADS)

Asuquo, Gibson Esang

Several studies indicate that commercialization of federally funded R&D technologies to private sector remains low. In an extension of research demonstrating relative effectiveness of various technology-transfer mechanisms used by the Department of Energy (DOE) in transferring federally funded R&D technologies, this study quantitatively analyzed 52 Industrial Technology Program (ITP) funded R&D technologies, from 1993 through 2006, to understand commercialization success of DOE's funded R&D technologies, based on the correlative significance between independent variables (R&D durations and levels of funding) and dependent variable (technology commercialization output). No statistically significant linear relationship was found between the studied variables. The R2 (the coefficient of multiple determination) value indicates that only three percent (0.03) of the change in the output of commercialized technologies can be explained by the change in the two independent variables. The results of this study have led to an important conclusion that the research, development, and deployment (RD&D) of federally funded energy technologies is complex and a non-linear process. The problem requires a consideration of other factors and a research design that can accommodate the complexity involved. However, as determined by this study, the ITP technology commercialization output (success rate) of 22% is nearly two times as high as the 14% Booz-Allen estimate for the rest of U.S. industry. A quantitative research (such as this study) that attempts to understand the relative significance of correlational relationship between R&D variables appears to offer insufficient explanations as to why the federal government is not getting high technology commercialization output from its dollar investments in R&D. Some qualitative research approaches could move this important research to the next level in the future. Further research in this area should focus on causal effects between R&D variables. The study should attempt to identify the effect that could be caused by an early involvement of angel investors, venture capitalists, and end-users of technologies during RD&D. Successful commercialization of energy technologies requires targeting the most promising innovations that may be jointly supported by public and private sector. A few suggestions on how to improve commercialization of federally funded R&D are outlined in Section 10.3 of this study.

Investigation of the Values Found in Primary Education Science and Technology Textbooks in Turkey

ERIC Educational Resources Information Center

Benzer, Elif

2013-01-01

In this study, the value types of 6, 7 and 8 class text books which take place in the primary education science and technology education program, have been targeted for investigation for the present rate of these values in different textbooks, and, whether they changed in accordance with class variables (class, subject content, and divisions of…

Relative efficiency and productivity: a preliminary exploration of public hospitals in Beijing, China.

PubMed

Li, Hao; Dong, Siping; Liu, Tingfang

2014-04-06

Third-grade hospitals in Beijing have been rapidly developing in capacity and scale for many years. These hospitals receive a large number of patients, and ensuring their efficient operation is crucial in meeting people's healthcare needs. In this context, a study of their relative efficiency and productivity would be helpful to identify the driving factors and further improve their performance. After a review of literature, the current numbers of open beds and employees were selected as input variables. The number of outpatient and emergency visits and the number of discharged patients were selected as output variables. A total of 12 third-grade Class A general public hospitals in Beijing were selected for a preliminary study. The panel data from 2006-2009 were collected by the National Institute of Hospital Administration, Ministry of Health of P.R. China. Descriptive analysis and data envelopment analysis were used to analyze the data using Stata 10.0 and DEAP(V2.1) software. In the 2006-2009 period, descriptive results show that sample hospitals continuously expanded their capacity and scale, with growth rate of total revenue being the highest among all variables. The DEA results show that the average annual growth rate of productivity was 26.7%, and the rates were 47.3%, 21.3% and 13.8% respectively for two consecutive years. The average annual growth rate of technological change was 28.3%, and the rates were 49.4%, 21.5% and 16.4% respectively for two consecutive years. The average annual growth rate of technical efficiency change was -1.3%, and the rates were -1.4%, -0.02% and -2.2% respectively for two consecutive years. The sample hospitals in Beijing experienced substantial productivity growth, but annual growth rates were declining. Substantial technological change was the main contributor to the growth. Although some hospitals exhibited improvements in technical efficiency, there was a slight decline in general. To improve overall efficiency and productivity, both government and hospitals need to further drive positive technological change, technical change, and allocative efficiency of public hospitals. More empirical studies are needed to include more hospitals of all three grades at a larger scale.

Continuous-variable quantum key distribution with 1 Mbps secure key rate.

PubMed

Huang, Duan; Lin, Dakai; Wang, Chao; Liu, Weiqi; Fang, Shuanghong; Peng, Jinye; Huang, Peng; Zeng, Guihua

2015-06-29

We report the first continuous-variable quantum key distribution (CVQKD) experiment to enable the creation of 1 Mbps secure key rate over 25 km standard telecom fiber in a coarse wavelength division multiplexers (CWDM) environment. The result is achieved with two major technological advances: the use of a 1 GHz shot-noise-limited homodyne detector and the implementation of a 50 MHz clock system. The excess noise due to noise photons from local oscillator and classical data channels in CWDM is controlled effectively. We note that the experimental verification of high-bit-rate CVQKD in the multiplexing environment is a significant step closer toward large-scale deployment in fiber networks.

Preliminary design-lift/cruise fan research and technology airplane flight control system

NASA Technical Reports Server (NTRS)

Gotlieb, P.; Lewis, G. E.; Little, L. J.

1976-01-01

This report presents the preliminary design of a stability augmentation system for a NASA V/STOL research and technology airplane. This stability augmentation system is postulated as the simplest system that meets handling qualities levels for research and technology missions flown by NASA test pilots. The airplane studied in this report is a T-39 fitted with tilting lift/cruise fan nacelles and a nose fan. The propulsion system features a shaft interconnecting the three variable pitch fans and three power plants. The mathematical modeling is based on pre-wind tunnel test estimated data. The selected stability augmentation system uses variable gains scheduled with airspeed. Failure analysis of the system illustrates the benign effect of engine failure. Airplane rate sensor failure must be solved with redundancy.

Design and Modeling of a Variable Heat Rejection Radiator

NASA Technical Reports Server (NTRS)

Miller, Jennifer R.; Birur, Gajanana C.; Ganapathi, Gani B.; Sunada, Eric T.; Berisford, Daniel F.; Stephan, Ryan

2011-01-01

Variable Heat Rejection Radiator technology needed for future NASA human rated & robotic missions Primary objective is to enable a single loop architecture for human-rated missions (1) Radiators are typically sized for maximum heat load in the warmest continuous environment resulting in a large panel area (2) Large radiator area results in fluid being susceptible to freezing at low load in cold environment and typically results in a two-loop system (3) Dual loop architecture is approximately 18% heavier than single loop architecture (based on Orion thermal control system mass) (4) Single loop architecture requires adaptability to varying environments and heat loads

Technology Experience of Solid Organ Transplant Patients and Their Overall Willingness to Use Interactive Health Technology.

PubMed

Vanhoof, Jasper M M; Vandenberghe, Bert; Geerts, David; Philippaerts, Pieter; De Mazière, Patrick; DeVito Dabbs, Annette; De Geest, Sabina; Dobbels, Fabienne

2018-03-01

The use of interactive health technology (IHT) is a promising pathway to tackle self-management problems experienced by many chronically ill patients, including solid organ transplant (Tx) patients. Yet, to ensure that the IHT is accepted and used, a human-centered design process is needed, actively involving end users in all steps of the development process. A first critical, predevelopment step involves understanding end users' characteristics. This study therefore aims to (a) select an IHT platform to deliver a self-management support intervention most closely related to Tx patients' current use of information and communication technologies (ICTs), (b) understand Tx patients' overall willingness to use IHT for self-management support, and investigate associations with relevant technology acceptance variables, and (c) explore Tx patients' views on potential IHT features. We performed a cross-sectional, descriptive study between October and December 2013, enrolling a convenience sample of adult heart, lung, liver, and kidney Tx patients from the University Hospitals Leuven, Belgium. Broad inclusion criteria were applied to ensure a representative patient sample. We used a 35-item newly designed interview questionnaire to measure Tx patients' use of ICTs, their overall willingness to use IHT, and their views on potential IHT features, as well as relevant technology acceptance variables derived from the Unified Theory of Acceptance and Use of Technology and a literature review. Descriptive statistics were used as appropriate, and an ordinal logistic regression model was built to determine the association between Tx patients' overall willingness to use IHT, the selected technology acceptance variables, and patient characteristics. Out of 139 patients, 122 agreed to participate (32 heart, 30 lung, 30 liver, and 30 kidney Tx patients; participation rate: 88%). Most patients were male (57.4%), married or living together (68%), and had a mean age of 55.9 ± 13.4 years. Only 27.9% of Tx patients possessed a smartphone, yet 72.1% owned at least one desktop or laptop PC with wireless Internet at home. On a 10-point numeric scale, asking patients whether they think IHT development is important to support them personally in their self-management, patients gave a median score of 7 (25th percentile 5 points; 75th percentile 10 points). Patients who were single or married or living together were more likely to give a higher rating than divorced or widowed patients; patients who completed only secondary education gave a higher rating than higher educated patients; and patients with prior ICT use gave a higher rating than patients without prior ICT use. Tx patients also had clear preferences regarding IHT features, such as automatic data transfer, as much as possible, visual aids (e.g., graphs) over text messages, and personally deciding when to access the IHT. By investigating Tx patients' possession and use of ICTs, we learned that computers and the Internet, and not smartphones, are the most suitable IHT platforms to deliver self-management interventions for our Tx patients. Moreover, Tx patients generally are open to using IHT, yet patient acceptance variables and their preferences for certain IHT features should be taken into account in the next steps of IHT development. Designers intending to develop or use existing IHTs should never overlook this critical first step in a human-centered design. Before considering using eHealth technology in clinical practice, professionals should always check whether patients are familiar with using information and communication technology, and whether they are willing to use technology for health-related purposes. © 2017 Sigma Theta Tau International.

The Analysis for Energy Consumption of Marine Air Conditioning System Based on VAV and VWV

NASA Astrophysics Data System (ADS)

Xu, Sai Feng; Yang, Xing Lin; Le, Zou Ying

2018-06-01

For ocean-going vessels sailing in different areas on the sea, the change of external environment factors will cause frequent changes in load, traditional ship air-conditioning system is usually designed with a fixed cooling capacity, this design method causes serious waste of resources. A new type of sea-based air conditioning system is proposed in this paper, which uses the sea-based source heat pump system, combined with variable air volume, variable water technology. The multifunctional cabins' dynamic loads for a ship navigating in a typical Eurasian route were calculated based on Simulink. The model can predict changes in full voyage load. Based on the simulation model, the effects of variable air volume and variable water volume on the energy consumption of the air-conditioning system are analyzed. The results show that: When the VAV is coupled with the VWV, the energy saving rate is 23.2%. Therefore, the application of variable air volume and variable water technology to marine air conditioning systems can achieve economical and energy saving advantages.

Precision Farming and Precision Pest Management: The Power of New Crop Production Technologies

PubMed Central

Strickland, R. Mack; Ess, Daniel R.; Parsons, Samuel D.

1998-01-01

The use of new technologies including Geographic Information Systems (GIS), the Global Positioning System (GPS), Variable Rate Technology (VRT), and Remote Sensing (RS) is gaining acceptance in the present high-technology, precision agricultural industry. GIS provides the ability to link multiple data values for the same geo-referenced location, and provides the user with a graphical visualization of such data. When GIS is coupled with GPS and RS, management decisions can be applied in a more precise "micro-managed" manner by using VRT techniques. Such technology holds the potential to reduce agricultural crop production costs as well as crop and environmental damage. PMID:19274236

Variable Emissivity Through MEMS Technology

NASA Technical Reports Server (NTRS)

Darrin, Ann Garrison; Osiander, Robert; Champion, John; Swanson, Ted; Douglas, Donya; Grob, Lisa M.; Powers, Edward I. (Technical Monitor)

2000-01-01

This paper discusses a new technology for variable emissivity (vari-e) radiator surfaces, which has significant advantages over traditional radiators and promises an alternative design technique for future spacecraft thermal control systems. All spacecraft rely on radiative surfaces to dissipate waste heat. These radiators have special coatings, typically with a low solar absorptivity and a high infrared-red emissivity, that are intended to optimize performance under the expected heat load and thermal sink environment. The dynamics of the heat loads and thermal environment make it a challenge to properly size the radiator and often require some means of regulating the heat rejection rate of the radiators in order to achieve proper thermal balance. Specialized thermal control coatings, which can passively or actively adjust their emissivity offer an attractive solution to these design challenges. Such systems would allow intelligent control of the rate of heat loss from a radiator in response to heat load and thermal environmental variations. Intelligent thermal control through variable emissivity systems is well suited for nano and pico spacecraft applications where large thermal fluctuations are expected due to the small thermal mass and limited electric resources. Presently there are three different types of vari-e technologies under development: Micro ElectroMechanical Systems (MEMS) louvers, Electrochromic devices, and Electrophoretic devices. This paper will describe several prototypes of micromachined (MEMS) louvers and experimental results for the emissivity variations measured on theses prototypes. It will further discuss possible actuation mechanisms and space reliability aspects for different designs. Finally, for comparison parametric evaluations of the thermal performances of the new vari-e technology and standard thermal control systems are presented in this paper.

An Examination of Safety Management Systems and Aviation Technologies in the Helicopter Emergency Medical Services Industry

NASA Astrophysics Data System (ADS)

Buckner, Steven A.

The Helicopter Emergency Medical Service (HEMS) industry has a significant role in the transportation of injured patients, but has experienced more accidents than all other segments of the aviation industry combined. With the objective of addressing this discrepancy, this study assesses the effect of safety management systems implementation and aviation technologies utilization on the reduction of HEMS accident rates. Participating were 147 pilots from Federal Aviation Regulations Part 135 HEMS operators, who completed a survey questionnaire based on the Safety Culture and Safety Management System Survey (SCSMSS). The study assessed the predictor value of SMS implementation and aviation technologies to the frequency of HEMS accident rates with correlation and multiple linear regression. The correlation analysis identified three significant positive relationships. HEMS years of experience had a high significant positive relationship with accident rate (r=.90; p<.05); SMS had a moderate significant positive relationship to Night Vision Goggles (NVG) (r=.38; p<.05); and SMS had a slight significant positive relationship with Terrain Avoidance Warning System (TAWS) (r=.234; p<.05). Multiple regression analysis suggested that when combined with NVG, TAWS, and SMS, HEMS years of experience explained 81.4% of the variance in accident rate scores (p<.05), and HEMS years of experience was found to be a significant predictor of accident rates (p<.05). Additional quantitative regression analysis was recommended to replicate the results of this study and to consider the influence of these variables for continued reduction of HEMS accidents, and to induce execution of SMS and aviation technologies from a systems engineering application. Recommendations for practice included the adoption of existing regulatory guidance for a SMS program. A qualitative analysis was also recommended for future study SMS implementation and HEMS accident rate from the pilot's perspective. A quantitative longitudinal study would further explore inferential relationships between the study variables. Current strategies should include the increased utilization of available aviation technology resources as this proactive stance may be beneficial for the establishment of an effective safety culture within the HEMS industry.

A Hierarchical Modulation Coherent Communication Scheme for Simultaneous Four-State Continuous-Variable Quantum Key Distribution and Classical Communication

NASA Astrophysics Data System (ADS)

Yang, Can; Ma, Cheng; Hu, Linxi; He, Guangqiang

2018-06-01

We present a hierarchical modulation coherent communication protocol, which simultaneously achieves classical optical communication and continuous-variable quantum key distribution. Our hierarchical modulation scheme consists of a quadrature phase-shifting keying modulation for classical communication and a four-state discrete modulation for continuous-variable quantum key distribution. The simulation results based on practical parameters show that it is feasible to transmit both quantum information and classical information on a single carrier. We obtained a secure key rate of 10^{-3} bits/pulse to 10^{-1} bits/pulse within 40 kilometers, and in the meantime the maximum bit error rate for classical information is about 10^{-7}. Because continuous-variable quantum key distribution protocol is compatible with standard telecommunication technology, we think our hierarchical modulation scheme can be used to upgrade the digital communication systems to extend system function in the future.

Two intelligent spraying systems developed for tree crop production

USDA-ARS?s Scientific Manuscript database

Precision pesticide application technologies are needed to achieve efficient and effective spray deposition on target areas and minimize off-target losses. Two variable-rate intelligent sprayers were developed as an introduction of new generation sprayers for tree crop applications. The first spraye...

Does the Use of Diagnostic Technology Reduce Fetal Mortality?

PubMed

Grytten, Jostein; Skau, Irene; Sørensen, Rune; Eskild, Anne

2018-01-19

To examine the effect that the introduction of new diagnostic technology in obstetric care has had on fetal death. The Medical Birth Registry of Norway provided detailed medical information for approximately 1.2 million deliveries from 1967 to 1995. Information about diagnostic technology was collected directly from the maternity units, using a questionnaire. The data were analyzed using a hospital fixed-effects regression with fetal mortality as the outcome measure. The key independent variables were the introduction of ultrasound and electronic fetal monitoring at each maternity ward. Hospital-specific trends and risk factors of the mother were included as control variables. The richness of the data allowed us to perform several robustness tests. The introduction of ultrasound caused a significant drop in fetal mortality rate, while the introduction of electronic fetal monitoring had no effect on the rate. In the population as a whole, ultrasound contributed to a reduction in fetal deaths of nearly 20 percent. For post-term deliveries, the reduction was well over 50 percent. The introduction of ultrasound made a major contribution to the decline in fetal mortality at the end of the last century. © Health Research and Educational Trust.

Relative efficiency and productivity: a preliminary exploration of public hospitals in Beijing, China

PubMed Central

2014-01-01

Background Third-grade hospitals in Beijing have been rapidly developing in capacity and scale for many years. These hospitals receive a large number of patients, and ensuring their efficient operation is crucial in meeting people’s healthcare needs. In this context, a study of their relative efficiency and productivity would be helpful to identify the driving factors and further improve their performance. Methods After a review of literature, the current numbers of open beds and employees were selected as input variables. The number of outpatient and emergency visits and the number of discharged patients were selected as output variables. A total of 12 third-grade Class A general public hospitals in Beijing were selected for a preliminary study. The panel data from 2006–2009 were collected by the National Institute of Hospital Administration, Ministry of Health of P.R. China. Descriptive analysis and data envelopment analysis were used to analyze the data using Stata 10.0 and DEAP(V2.1) software. Results In the 2006–2009 period, descriptive results show that sample hospitals continuously expanded their capacity and scale, with growth rate of total revenue being the highest among all variables. The DEA results show that the average annual growth rate of productivity was 26.7%, and the rates were 47.3%, 21.3% and 13.8% respectively for two consecutive years. The average annual growth rate of technological change was 28.3%, and the rates were 49.4%, 21.5% and 16.4% respectively for two consecutive years. The average annual growth rate of technical efficiency change was -1.3%, and the rates were -1.4%, -0.02% and -2.2% respectively for two consecutive years. Conclusions The sample hospitals in Beijing experienced substantial productivity growth, but annual growth rates were declining. Substantial technological change was the main contributor to the growth. Although some hospitals exhibited improvements in technical efficiency, there was a slight decline in general. To improve overall efficiency and productivity, both government and hospitals need to further drive positive technological change, technical change, and allocative efficiency of public hospitals. More empirical studies are needed to include more hospitals of all three grades at a larger scale. PMID:24708701

Suitable Adaptation Mechanisms for Intelligent Tutoring Technologies

DTIC Science & Technology

2010-12-01

the Acoustic Society of America, 93(2), pp. 1097-1108. Neurofeedback equipment - Wireless Brainquiry PET EEG and ActivEEG. (n.d.). Retrieved from...27 5.2 Electroencephalogram ( EEG ...electroencephalogram ( EEG ), heart rate variability (HRV- a measure involving the electrocardiogram [ECG]), and galvanic skin response (GSR) either

Advance innovations of an intelligent sprayer for nursery and fruit tree crops

USDA-ARS?s Scientific Manuscript database

Conventional spray application technology requires excessive amounts of pesticide use to achieve effective pest control in floral, nursery, and other specialty crop productions. This onerous challenge is now overcome by our newly developed automated variable-rate, air-assisted precision sprayer. Thi...

Development of Two Intelligent Spray Systems for Ornamental Nurseries

USDA-ARS?s Scientific Manuscript database

Current application technology for floral, nursery, and other specialty crop production wastes significant amounts of pesticides. Two different real-time variable-rate sprayer prototypes for ornamental nursery and tree crops were developed to deliver chemicals on target areas as needed. The first pr...

Bioprocess development workflow: Transferable physiological knowledge instead of technological correlations.

PubMed

Reichelt, Wieland N; Haas, Florian; Sagmeister, Patrick; Herwig, Christoph

2017-01-01

Microbial bioprocesses need to be designed to be transferable from lab scale to production scale as well as between setups. Although substantial effort is invested to control technological parameters, usually the only true constant parameter is the actual producer of the product: the cell. Hence, instead of solely controlling technological process parameters, the focus should be increasingly laid on physiological parameters. This contribution aims at illustrating a workflow of data life cycle management with special focus on physiology. Information processing condenses the data into physiological variables, while information mining condenses the variables further into physiological descriptors. This basis facilitates data analysis for a physiological explanation for observed phenomena in productivity. Targeting transferability, we demonstrate this workflow using an industrially relevant Escherichia coli process for recombinant protein production and substantiate the following three points: (1) The postinduction phase is independent in terms of productivity and physiology from the preinduction variables specific growth rate and biomass at induction. (2) The specific substrate uptake rate during induction phase was found to significantly impact the maximum specific product titer. (3) The time point of maximum specific titer can be predicted by an easy accessible physiological variable: while the maximum specific titers were reached at different time points (19.8 ± 7.6 h), those maxima were reached all within a very narrow window of cumulatively consumed substrate dSn (3.1 ± 0.3 g/g). Concluding, this contribution provides a workflow on how to gain a physiological view on the process and illustrates potential benefits. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 33:261-270, 2017. © 2016 American Institute of Chemical Engineers.

[Nurses' Innovation Acceptance of Barcode Technology].

PubMed

Cheng, Hui-Ping; Lee, Ting-Ting; Liu, Chieh-Yu; Hou, I-Ching

2016-04-01

Healthcare organizations have increasingly adopted barcode technology to improve care quality and work efficiency. Barcode technology is simple to use, so it is frequently used in patient identification, medication administration, and specimen collection processes. This study used a technology acceptance model and innovation diffusion theory to explore the innovation acceptance of barcode technology by nurses. The data were collected using a structured questionnaire with open-ended questions that was based on the technology acceptance model and innovation diffusion theory. The questionnaire was distributed to and collected from 200 nurses from March to May 2014. Data on laboratory reporting times and specimen rejection rates were collected as well. Variables that were found to have a significant relationship (p<.001) with innovation acceptance included (in order of importance): perceived usefulness (r=.722), perceived ease of use (r=.720), observability (r=.579), compatibility (r=.364), and trialability (r=.344). N-level nurses demonstrated higher acceptance than their N1 and N2 level peers (F=3.95, p<.05). Further, the mean laboratory reporting time decreased 109 minutes (t=10.03, p<.05) and the mean specimen rejection rate decreased from 2.18% to 0.28%. The results revealed that barcode technology has been accepted by nurses and that this technology effectively decreases both laboratory reporting times and specimen rejection rates. However, network speed and workflow should be further improved in order to benefit clinical practice.

Literature Review of Low Impact Development for Stormwater Control

DTIC Science & Technology

2015-05-30

appropriate LID technology can be selected to capture the targeted vi metal pollutant. Little information exists on the effects of field variables such as...loading rates and volume, temperature , climate, pH, sediments, organics, and maintenance cycles on systems in the field. 4. The amount of research...maximum extent technically feasible, the pre-development hydrology of the property with regard to the temperature , rate, volume, and duration of flow

Urine flow is a novel hemodynamic monitoring tool for the detection of hypovolemia.

PubMed

Shamir, Micha Y; Kaplan, Leonid; Marans, Rachel S; Willner, Dafna; Klein, Yoram

2011-03-01

Noticeable changes in vital signs indicating hypovolemia occur only after 15% of the blood volume is lost. More sensitive variables (e.g., cardiac output, systolic pressure variation and its Δdown component) are invasive and difficult to obtain in the early phase of bleeding. Lately, a new technology for continuous optical measurements of minute-to-minute urine flow rates has become available. We performed a preliminary evaluation to determine whether urine flow can act as an early and sensitive warning of hypovolemia. Eleven patients (ASA physical status I-II) undergoing posterior spine fusion surgery were studied prospectively. Study variables included heart rate, blood pressure (systolic and diastolic), systolic pressure variation and Δdown, minute urinary flow, hemoglobin, blood and urinary sodium, and creatinine in the blood and urine. Urine flow rate was measured using URINFO 2000™ (FlowSense Medical, Misgav, Israel). After recording baseline variables, 10 mL/kg of the patient's blood was shed and a second set of variables was recorded. Subsequently, hypovolemia was reversed by infusing colloid solution (hetastarch 6%) followed by recording a third set of variables. These 3 observations were then compared. An average of 614 ± 143 mL (mean ± SD) of blood was shed. During phlebotomy, the mean urine flow rate decreased from 5.7 ± 8 mL/min to 1.07 ± 2.5 mL/min. Systolic blood pressure and hemoglobin also decreased. Δdown increased. After rehydration, urine flow, blood pressure, and Δdown values returned to baseline. The hemoglobin concentration decreased whereas other variables did not change significantly. Urine flow rate is a dynamic variable that seems to be a reliable indicator of changes in blood volume. These results justify further investigation.

Development of the Variable Emittance Thermal Suite for the Space Technology 5 Microsatellite

NASA Technical Reports Server (NTRS)

Douglas, Donya M.; Swanson, Theodore; Osiander, Robert; Champion, John; Darrin, Ann Garrison; Biter, William; Chandrasekhar, Prasanna; Obenschain, Arthur (Technical Monitor)

2001-01-01

The advent of very small satellites, such as nano and microsatellites, logically leads to a requirement for smaller thermal control subsystems. In addition, the thermal control needs of the smaller spacecraft/instrument may well be different from more traditional situations. For example, power for traditional heaters may be very limited or unavailable, mass allocations may be severely limited, and fleets of nano/microsatellites will require a generic thermal design as the cost of unique designs will be prohibitive. Some applications may require significantly increased power levels while others may require extremely low heat loss for extended periods. Small spacecraft will have low thermal capacitance thus subjecting them to large temperature swings when either the heat generation rate changes or the thermal sink temperature changes. This situation, combined with the need for tighter temperature control, will present a challenging situation during transient operation. The use of "off-the-shelf" commercial spacecraft buses for science instruments will also present challenges. Older thermal technology, such as heaters, thermostats, and heat pipes, will almost certainly not be sufficient to meet the requirements of these new spacecraft/instruments. They are generally too heavy, not scalable to very small sizes, and may consume inordinate amounts of power. Hence there is a strong driver to develop new technology to meet these emerging needs. Variable emittance coatings offer an exciting alternative to traditional control methodologies and are one of the technologies that will be flown on Space Technology 5, a mission of three microsatellites designed to validate "enabling" technologies. Several studies have identified variable emittance coatings as applicable to a wide range of spacecraft, and to potentially offer substantial savings in mass and/or power over traditional approaches. This paper discusses the development of the variable emittance thermal suite for ST-5. More specifically, it provides a description of and the infusion and validation plans for the variable emittance coatings.

Factors associated with the diffusion rate of innovations: a pilot study from the perspective of the Brazilian Unified National Health System.

PubMed

Schneiders, Roberto Eduardo; Ronsoni, Ricardo de March; Sarti, Flávia Mori; Nita, Marcelo Eidi; Bastos, Ediane de Assis; Zimmermann, Ivan Ricardo; Ferreira, Fernando Fagundes

2016-10-10

Budget Impact Analyses require a set of essential information on health technology innovation, including expected rates of adoption. There is an absence of studies investigating trends, magnitude of budgetary effects and determinants of diffusion rates for health technology innovations worldwide during the last decades. The present study proposes a pilot assessment on main determinants influencing diffusion rates of pharmaceutical innovations within the Brazilian Unified National Health System (SUS). Data from the Brazilian Health Informatics Department (DATASUS) was gathered to establish the main determinants of diffusion rates of health technology innovations in Brazil, specifically referring to pharmaceutical innovations incorporated in the Brazilian Program for Specialized Pharmaceutical Services (CEAF) at SUS. Information was retrieved on DATASUS relating to patients who had used one of the medicines incorporated into CEAF at least three years prior to the beginning of the study (2015) for treatment of each health condition available. Thus, data from patients adopting 10 different medicines were analyzed in the study. Results from the zero-one inflated beta model showed a higher influence on diffusion rates of pharmaceutical innovations due to: number of pharmaceutical competitors for treatment of the same disease available at CEAF (negative); medicine used in combination with other medication (positive); and innovative medicine within the SUS (positive). Further research on diffusion rates of health technology innovations is required, including wider scope of diseases and medications, potential confusion factors and other variables that may influence rates of adoption in different health systems.

An analysis of variable dissolution rates of sacrificial zinc anodes: a case study of the Hamble estuary, UK.

PubMed

Rees, Aldous B; Gallagher, Anthony; Comber, Sean; Wright, Laurence A

2017-09-01

Sacrificial anodes are intrinsic to the protection of boats and marine structures by preventing the corrosion of metals higher up the galvanic scale through their preferential breakdown. The dissolution of anodes directly inputs component metals into local receiving waters, with variable rates of dissolution evident in coastal and estuarine environments. With recent changes to the Environmental Quality Standard (EQS), the load for zinc in estuaries such as the Hamble, UK, which has a large amount of recreational craft, now exceeds the zinc standard of 7.9 μg/l. A survey of boat owners determined corrosion rates and estimated zinc loading at between 6.95 and 7.11 t/year. The research confirms the variable anode corrosion within the Hamble and highlighted a lack of awareness of anode technology among boat owners. Monitoring and investigation discounted metal structures and subterranean power cables as being responsible for these variations but instead linked accelerated dissolution to marina power supplies and estuarine salinity variations.

Spray drift and off-target loss reduction with a precision air-assisted sprayer

USDA-ARS?s Scientific Manuscript database

Spray drift and off-target losses are inherent problems of conventional air-assisted sprayers. Their low efficiencies cause environmental pollutions resulting in public anxieties. A new drift reduction technology incorporating laser scanning capabilities with a variable-rate air-assisted sprayer w...

Influence of Reduced Mass Flow Rate and Chamber Backpressure on Swirl Injector Fluid Mechanics

NASA Technical Reports Server (NTRS)

Kenny, R Jeremy; Hulka, James R.

2008-01-01

Industry interest in variable-thrust liquid rocket engines places a demand on engine injector technology to operate over a wide range of liquid mass flow rates and chamber backpressures. One injection technology of current interest for variable thrust applications is an injector design with swirled fluids. Current swirl injector design methodologies do not take into account how swirl injector design parameters respond to elevated chamber backpressures at less than design mass flow rates. The current work was created to improve state-of-the-art swirl injector design methods in this area. The specific objective was to study the effects of elevated chamber backpressure and off-design mass flow rates on swirl injector fluid mechanics. Using a backpressure chamber with optical access, water was flowed through a swirl injector at various combinations of chamber backpressure and mass flow rates. The film thickness profile down the swirl injector nozzle section was measured through a transparent nozzle section of the injector. High speed video showed measurable increases in the film thickness profile with application of chamber backpressure and mass flow rates less than design. At prescribed combinations of chamber backpressure and injected mass flow rate, a discrete change in the film thickness profile was observed. Measured injector discharge coefficient values showed different trends with increasing chamber backpressure at low mass flow rates as opposed to near-design mass flow rates. Downstream spray angles showed classic changes in morphology as the mass flow rate was decreased below the design value. Increasing chamber backpressure decreased the spray angle at any injection mass flow rate. Experimental measurements and discussion of these results are reported in this paper.

Site-specific management of cotton root rot using airborne and satellite imagery

USDA-ARS?s Scientific Manuscript database

Cotton root rot is a serious cotton disease that can now be effectively controlled with Topguard Terra Fungicide. The objectives of this research were to demonstrate how site-specific fungicide application could be implemented based on historical remote sensing imagery and variable rate technology. ...

Precision agriculture: Data to knowledge decision

USDA-ARS?s Scientific Manuscript database

From the development of the first viable variable-rate fertilizer systems in the upper Midwest USA, precision agriculture is now about two decades old. In that time, new technologies have come into play, but the overall goal of using spatial data to create actionable knowledge that can then be used ...

Impacts of terrain attributes on economics and the environment: Costs of reducing potential nitrogen pollution in wheat production

USDA-ARS?s Scientific Manuscript database

The economic cost of achieving desired environmental outcomes from uniform and variable rate fertilizer application technologies depends both on market forces and agronomic properties. Using spatial econometric methods, we analyze the impact of nitrogen fertilizer supply by terrain attribute on the...

Can Wearable Devices Accurately Measure Heart Rate Variability? A Systematic Review.

PubMed

Georgiou, Konstantinos; Larentzakis, Andreas V; Khamis, Nehal N; Alsuhaibani, Ghadah I; Alaska, Yasser A; Giallafos, Elias J

2018-03-01

A growing number of wearable devices claim to provide accurate, cheap and easily applicable heart rate variability (HRV) indices. This is mainly accomplished by using wearable photoplethysmography (PPG) and/or electrocardiography (ECG), through simple and non-invasive techniques, as a substitute of the gold standard RR interval estimation through electrocardiogram. Although the agreement between pulse rate variability (PRV) and HRV has been evaluated in the literature, the reported results are still inconclusive especially when using wearable devices. The purpose of this systematic review is to investigate if wearable devices provide a reliable and precise measurement of classic HRV parameters in rest as well as during exercise. A search strategy was implemented to retrieve relevant articles from MEDLINE and SCOPUS databases, as well as, through internet search. The 308 articles retrieved were reviewed for further evaluation according to the predetermined inclusion/exclusion criteria. Eighteen studies were included. Sixteen of them integrated ECG - HRV technology and two of them PPG - PRV technology. All of them examined wearable devices accuracy in RV detection during rest, while only eight of them during exercise. The correlation between classic ECG derived HRV and the wearable RV ranged from very good to excellent during rest, yet it declined progressively as exercise level increased. Wearable devices may provide a promising alternative solution for measuring RV. However, more robust studies in non-stationary conditions are needed using appropriate methodology in terms of number of subjects involved, acquisition and analysis techniques implied.

Retrospective North American CFL Experience Curve Analysis and Correlation to Deployment Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Sarah J.; Wei, Max; Sohn, Michael D.

Retrospective experience curves are a useful tool for understanding historic technology development, and can contribute to investment program analysis and future cost estimation efforts. This work documents our development of an analysis approach for deriving retrospective experience curves with a variable learning rate, and its application to develop an experience curve for compact fluorescent lamps for the global and North American markets over the years 1990-2007. Uncertainties and assumptions involved in interpreting data for our experience curve development are discussed, including the processing and transformation of empirical data, the selection of system boundaries, and the identification of historical changes inmore » the learning rate over the course of 15 years. In the results that follow, we find that that the learning rate has changed at least once from 1990-2007. We also explore if, and to what degree, public deployment programs may have contributed to an increased technology learning rate in North America. We observe correlations between the changes in the learning rate and the initiation of new policies, abrupt technological advances, including improvements to ballast technology, and economic and political events such as trade tariffs and electricity prices. Finally, we discuss how the findings of this work (1) support the use of segmented experience curves for retrospective and prospective analysis and (2) may imply that investments in technological research and development have contributed to a change in market adoption and penetration.« less

Energy Storage on the Grid and the Short-term Variability of Wind

NASA Astrophysics Data System (ADS)

Hittinger, Eric Stephen

Wind generation presents variability on every time scale, which must be accommodated by the electric grid. Limited quantities of wind power can be successfully integrated by the current generation and demand-side response mix but, as deployment of variable resources increases, the resulting variability becomes increasingly difficult and costly to mitigate. In Chapter 2, we model a co-located power generation/energy storage block composed of wind generation, a gas turbine, and fast-ramping energy storage. A scenario analysis identifies system configurations that can generate power with 30% of energy from wind, a variability of less than 0.5% of the desired power level, and an average cost around $70/MWh. While energy storage technologies have existed for decades, fast-ramping grid-level storage is still an immature industry and is experiencing relatively rapid improvements in performance and cost across a variety of technologies. Decreased capital cost, increased power capability, and increased efficiency all would improve the value of an energy storage technology and each has cost implications that vary by application, but there has not yet been an investigation of the marginal rate of technical substitution between storage properties. The analysis in chapter 3 uses engineering-economic models of four emerging fast-ramping energy storage technologies to determine which storage properties have the greatest effect on cost-of-service. We find that capital cost of storage is consistently important, and identify applications for which power/energy limitations are important. In some systems with a large amount of wind power, the costs of wind integration have become significant and market rules have been slowly changing in order to internalize or control the variability of wind generation. Chapter 4 examines several potential market strategies for mitigating the effects of wind variability and estimate the effect that each strategy would have on the operation and profitability of wind farms. We find that market scenarios using existing price signals to motivate wind to reduce variability allow wind generators to participate in variability reduction when the market conditions are favorable, and can reduce short-term (30-minute) fluctuations while having little effect on wind farm revenue.

Designing eHealth Applications to Reduce Cognitive Effort for Persons With Severe Mental Illness: Page Complexity, Navigation Simplicity, and Comprehensibility

PubMed Central

Spring, Michael R; Hanusa, Barbara H; Eack, Shaun M; Haas, Gretchen L

2017-01-01

Background eHealth technologies offer great potential for improving the use and effectiveness of treatments for those with severe mental illness (SMI), including schizophrenia and schizoaffective disorder. This potential can be muted by poor design. There is limited research on designing eHealth technologies for those with SMI, others with cognitive impairments, and those who are not technology savvy. We previously tested a design model, the Flat Explicit Design Model (FEDM), to create eHealth interventions for individuals with SMI. Subsequently, we developed the design concept page complexity, defined via the design variables we created of distinct topic areas, distinct navigation areas, and number of columns used to organize contents and the variables of text reading level, text reading ease (a newly added variable to the FEDM), and the number of hyperlinks and number of words on a page. Objective The objective of our study was to report the influence that the 19 variables of the FEDM have on the ability of individuals with SMI to use a website, ratings of a website’s ease of use, and performance on a novel usability task we created termed as content disclosure (a measure of the influence of a homepage’s design on the understanding user’s gain of a website). Finally, we assessed the performance of 3 groups or dimensions we developed that organize the 19 variables of the FEDM, termed as page complexity, navigational simplicity, and comprehensibility. Methods We measured 4 website usability outcomes: ability to find information, time to find information, ease of use, and a user’s ability to accurately judge a website’s contents. A total of 38 persons with SMI (chart diagnosis of schizophrenia or schizoaffective disorder) and 5 mental health websites were used to evaluate the importance of the new design concepts, as well as the other variables in the FEDM. Results We found that 11 of the FEDM’s 19 variables were significantly associated with all 4 usability outcomes. Most other variables were significantly related to 2 or 3 of these usability outcomes. With the 5 tested websites, 7 of the 19 variables of the FEDM overlapped with other variables, resulting in 12 distinct variable groups. The 3 design dimensions had acceptable coefficient alphas. Both navigational simplicity and comprehensibility were significantly related to correctly identifying whether information was available on a website. Page complexity and navigational simplicity were significantly associated with the ability and time to find information and ease-of-use ratings. Conclusions The 19 variables and 3 dimensions (page complexity, navigational simplicity, and comprehensibility) of the FEDM offer evidence-based design guidance intended to reduce the cognitive effort required to effectively use eHealth applications, particularly for persons with SMI, and potentially others, including those with cognitive impairments and limited skills or experience with technology. The new variables we examined (topic areas, navigational areas, columns) offer additional and very simple ways to improve simplicity. PMID:28057610

Informatics technology mimics ecology: dense, mutualistic collaboration networks are associated with higher publication rates.

PubMed

Sorani, Marco D

2012-01-01

Information technology (IT) adoption enables biomedical research. Publications are an accepted measure of research output, and network models can describe the collaborative nature of publication. In particular, ecological networks can serve as analogies for publication and technology adoption. We constructed network models of adoption of bioinformatics programming languages and health IT (HIT) from the literature.We selected seven programming languages and four types of HIT. We performed PubMed searches to identify publications since 2001. We calculated summary statistics and analyzed spatiotemporal relationships. Then, we assessed ecological models of specialization, cooperativity, competition, evolution, biodiversity, and stability associated with publications.Adoption of HIT has been variable, while scripting languages have experienced rapid adoption. Hospital systems had the largest HIT research corpus, while Perl had the largest language corpus. Scripting languages represented the largest connected network components. The relationship between edges and nodes was linear, though Bioconductor had more edges than expected and Perl had fewer. Spatiotemporal relationships were weak. Most languages shared a bioinformatics specialization and appeared mutualistic or competitive. HIT specializations varied. Specialization was highest for Bioconductor and radiology systems. Specialization and cooperativity were positively correlated among languages but negatively correlated among HIT. Rates of language evolution were similar. Biodiversity among languages grew in the first half of the decade and stabilized, while diversity among HIT was variable but flat. Compared with publications in 2001, correlation with publications one year later was positive while correlation after ten years was weak and negative.Adoption of new technologies can be unpredictable. Spatiotemporal relationships facilitate adoption but are not sufficient. As with ecosystems, dense, mutualistic, specialized co-habitation is associated with faster growth. There are rapidly changing trends in external technological and macroeconomic influences. We propose that a better understanding of how technologies are adopted can facilitate their development.

Advanced diesel electronic fuel injection and turbocharging

NASA Astrophysics Data System (ADS)

Beck, N. J.; Barkhimer, R. L.; Steinmeyer, D. C.; Kelly, J. E.

1993-12-01

The program investigated advanced diesel air charging and fuel injection systems to improve specific power, fuel economy, noise, exhaust emissions, and cold startability. The techniques explored included variable fuel injection rate shaping, variable injection timing, full-authority electronic engine control, turbo-compound cooling, regenerative air circulation as a cold start aid, and variable geometry turbocharging. A Servojet electronic fuel injection system was designed and manufactured for the Cummins VTA-903 engine. A special Servojet twin turbocharger exhaust system was also installed. A series of high speed combustion flame photos was taken using the single cylinder optical engine at Michigan Technological University. Various fuel injection rate shapes and nozzle configurations were evaluated. Single-cylinder bench tests were performed to evaluate regenerative inlet air heating techniques as an aid to cold starting. An exhaust-driven axial cooling air fan was manufactured and tested on the VTA-903 engine.

A burst compression and expansion technique for variable-rate users in satellite-switched TDMA networks

NASA Technical Reports Server (NTRS)

Budinger, James M.

1990-01-01

A burst compression and expansion technique is described for asynchronously interconnecting variable-data-rate users with cost-efficient ground terminals in a satellite-switched, time-division-multiple-access (SS/TDMA) network. Compression and expansion buffers in each ground terminal convert between lower rate, asynchronous, continuous-user data streams and higher-rate TDMA bursts synchronized with the satellite-switched timing. The technique described uses a first-in, first-out (FIFO) memory approach which enables the use of inexpensive clock sources by both the users and the ground terminals and obviates the need for elaborate user clock synchronization processes. A continous range of data rates from kilobits per second to that approaching the modulator burst rate (hundreds of megabits per second) can be accommodated. The technique was developed for use in the NASA Lewis Research Center System Integration, Test, and Evaluation (SITE) facility. Some key features of the technique have also been implemented in the gound terminals developed at NASA Lewis for use in on-orbit evaluation of the Advanced Communications Technology Satellite (ACTS) high burst rate (HBR) system.

The preliminary design of a lift-cruise fan airplane flight control system

NASA Technical Reports Server (NTRS)

Gotlieb, P.

1977-01-01

This paper presents the preliminary design of a stability augmentation system for a NASA V/STOL research and technology airplane. This stability augmentation system is postulated as the simplest system that meets handling-quality levels for research and technology missions flown by NASA test pilots. The airplane studied in this report is a modified T-39 fitted with tilting lift/cruise fan nacelles and a nose fan. The propulsion system features a shaft that interconnects three variable-pitch fans and three powerplants. The mathematical modeling is based on pre-wind tunnel test estimated data. The selected stability augmentation system uses variable gains scheduled with airspeed. Failure analysis of the system illustrates the benign effect of engine failure. Airplane rate sensor failure must be solved with redundancy.

Quantification of the oxygen uptake rate in a dissolved oxygen controlled oscillating jet-driven microbioreactor.

PubMed

Kirk, Timothy V; Marques, Marco Pc; Radhakrishnan, Anand N Pallipurath; Szita, Nicolas

2016-03-01

Microbioreactors have emerged as a new tool for early bioprocess development. The technology has advanced rapidly in the last decade and obtaining real-time quantitative data of process variables is nowadays state of the art. In addition, control over process variables has also been achieved. The aim of this study was to build a microbioreactor capable of controlling dissolved oxygen (DO) concentrations and to determine oxygen uptake rate in real time. An oscillating jet driven, membrane-aerated microbioreactor was developed without comprising any moving parts. Mixing times of ∼7 s, and k L a values of ∼170 h -1 were achieved. DO control was achieved by varying the duty cycle of a solenoid microvalve, which changed the gas mixture in the reactor incubator chamber. The microbioreactor supported Saccharomyces cerevisiae growth over 30 h and cell densities of 6.7 g dcw L -1 . Oxygen uptake rates of ∼34 mmol L -1 h -1 were achieved. The results highlight the potential of DO-controlled microbioreactors to obtain real-time information on oxygen uptake rate, and by extension on cellular metabolism for a variety of cell types over a broad range of processing conditions. © 2015 The Authors. Journal of Chemical Technology & Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Modeling cascading diffusion of new energy technologies: case study of residential solid oxide fuel cells in the US and internationally.

PubMed

Herron, Seth; Williams, Eric

2013-08-06

Subsidy programs for new energy technologies are motivated by the experience curve: increased adoption of a technology leads to learning and economies of scale that lower costs. Geographic differences in fuel prices and climate lead to large variability in the economic performance of energy technologies. The notion of cascading diffusion is that regions with favorable economic conditions serve as the basis to build scale and reduce costs so that the technology becomes attractive in new regions. We develop a model of cascading diffusion and implement via a case study of residential solid oxide fuel cells (SOFCs) for combined heating and power. We consider diffusion paths within the U.S. and internationally. We construct market willingness-to-pay curves and estimate future manufacturing costs via an experience curve. Combining market and cost results, we find that for rapid cost reductions (learning rate = 25%), a modest public subsidy can make SOFC investment profitable for 20-160 million households. If cost reductions are slow however (learning rate = 15%), residential SOFCs may not become economically competitive. Due to higher energy prices in some countries, international diffusion is more favorable than domestic, mitigating much of the uncertainty in the learning rate.

Activity Monitoring and Heart Rate Variability as Indicators of Fall Risk: Proof-of-Concept for Application of Wearable Sensors in the Acute Care Setting.

PubMed

Razjouyan, Javad; Grewal, Gurtej Singh; Rishel, Cindy; Parthasarathy, Sairam; Mohler, Jane; Najafi, Bijan

2017-07-01

Growing concern for falls in acute care settings could be addressed with objective evaluation of fall risk. The current proof-of-concept study evaluated the feasibility of using a chest-worn sensor during hospitalization to determine fall risk. Physical activity and heart rate variability (HRV) of 31 volunteers admitted to a 29-bed adult inpatient unit were recorded using a single chest-worn sensor. Sensor data during the first 24-hour recording were analyzed. Participants were stratified using the Hendrich II fall risk assessment into high and low fall risk groups. Univariate analysis revealed age, daytime activity, nighttime side lying posture, and HRV were significantly different between groups. Results suggest feasibility of wearable technology to consciously monitor physical activity, sleep postures, and HRV as potential markers of fall risk in the acute care setting. Further study is warranted to confirm the results and examine the efficacy of the proposed wearable technology to manage falls in hospitals. [Journal of Gerontological Nursing, 43(7), 53-62.]. Copyright 2017, SLACK Incorporated.

The role of wearable sensors and wireless technologies for the assessment of heart rate variability in anorexia nervosa.

PubMed

Billeci, Lucia; Tartarisco, Gennaro; Brunori, Elena; Crifaci, Giulia; Scardigli, Silvia; Balocchi, Rita; Pioggia, Giovanni; Maestro, Sandra; Morales, Maria Aurora

2015-03-01

Bradycardia and abnormal cardiac autonomic function are related to increased mortality in anorexia nervosa (AN). The aim of this study was to assess heart rate (HR) and HR variability of young adolescents with AN as compared to controls by means of wearable sensors and wireless technologies. The ECG signal was recorded in 27 AN girls and 15 healthy girls at rest using a wearable chest strap. The tachogram, the mean intervals between R peaks (meanRR), the root mean square of successive differences (RMSSD), the power of low-frequency (LF) and high-frequency (HF) bands and the LF/HF ratio were assessed. All AN girls showed a reduced HR and an increased meanRR and RMSSD. An HF increase, a LF decrease, and a LF/HF reduction indicated a prevalence of the parasympathetic on sympathetic activity. The instruments used in this pilot study were feasible, unobtrusive and extremely suitable in AN subjects who are burdened by high incidence of cardiovascular mortality; their application could open to new approaches of vital signs monitoring in hospitals as well as in home settings.

Characterization of depressive States in bipolar patients using wearable textile technology and instantaneous heart rate variability assessment.

PubMed

Valenza, Gaetano; Citi, Luca; Gentili, Claudio; Lanata, Antonio; Scilingo, Enzo Pasquale; Barbieri, Riccardo

2015-01-01

The analysis of cognitive and autonomic responses to emotionally relevant stimuli could provide a viable solution for the automatic recognition of different mood states, both in normal and pathological conditions. In this study, we present a methodological application describing a novel system based on wearable textile technology and instantaneous nonlinear heart rate variability assessment, able to characterize the autonomic status of bipolar patients by considering only electrocardiogram recordings. As a proof of this concept, our study presents results obtained from eight bipolar patients during their normal daily activities and being elicited according to a specific emotional protocol through the presentation of emotionally relevant pictures. Linear and nonlinear features were computed using a novel point-process-based nonlinear autoregressive integrative model and compared with traditional algorithmic methods. The estimated indices were used as the input of a multilayer perceptron to discriminate the depressive from the euthymic status. Results show that our system achieves much higher accuracy than the traditional techniques. Moreover, the inclusion of instantaneous higher order spectra features significantly improves the accuracy in successfully recognizing depression from euthymia.

Using a modified technology acceptance model to evaluate healthcare professionals' adoption of a new telemonitoring system.

PubMed

Gagnon, Marie Pierre; Orruño, Estibalitz; Asua, José; Abdeljelil, Anis Ben; Emparanza, José

2012-01-01

To examine the factors that could influence the decision of healthcare professionals to use a telemonitoring system. A questionnaire, based on the Technology Acceptance Model (TAM), was developed. A panel of experts in technology assessment evaluated the face and content validity of the instrument. Two hundred and thirty-four questionnaires were distributed among nurses and doctors of the cardiology, pulmonology, and internal medicine departments of a tertiary hospital. Cronbach alpha was calculated to measure the internal consistency of the questionnaire items. Construct validity was evaluated using interitem correlation analysis. Logistic regression analysis was performed to test the theoretical model. Adjusted odds ratios (ORs) and their 95% confidence intervals (CIs) were computed. A response rate of 39.7% was achieved. With the exception of one theoretical construct (Habit) that corresponds to behaviors that become automatized, Cronbach alpha values were acceptably high for the remaining constructs. Theoretical variables were well correlated with each other and with the dependent variable. The original TAM was good at predicting telemonitoring usage intention, Perceived Usefulness being the only significant predictor (OR: 5.28, 95% CI: 2.12-13.11). The model was still significant and more powerful when the other theoretical variables were added. However, the only significant predictor in the modified model was Facilitators (OR: 4.96, 95% CI: 1.59-15.55). The TAM is a good predictive model of healthcare professionals' intention to use telemonitoring. However, the perception of facilitators is the most important variable to consider for increasing doctors' and nurses' intention to use the new technology.

Construction and Operation Costs of Wastewater Treatment and Implications for the Paper Industry in China.

PubMed

Niu, Kunyu; Wu, Jian; Yu, Fang; Guo, Jingli

2016-11-15

This paper aims to develop a construction and operation cost model of wastewater treatment for the paper industry in China and explores the main factors that determine these costs. Previous models mainly involved factors relating to the treatment scale and efficiency of treatment facilities for deriving the cost function. We considered the factors more comprehensively by adding a regional variable to represent the economic development level, a corporate ownership factor to represent the plant characteristics, a subsector variable to capture pollutant characteristics, and a detailed-classification technology variable. We applied a unique data set from a national pollution source census for the model simulation. The major findings include the following: (1) Wastewater treatment costs in the paper industry are determined by scale, technology, degree of treatment, ownership, and regional factors; (2) Wastewater treatment costs show a large decreasing scale effect; (3) The current level of pollutant discharge fees is far lower than the marginal treatment costs for meeting the wastewater discharge standard. Key implications are as follows: (1) Cost characteristics and impact factors should be fully recognized when planning or making policies relating to wastewater treatment projects or technology development; (2) There is potential to reduce treatment costs by centralizing wastewater treatment via industrial parks; (3) Wastewater discharge fee rates should be increased; (4) Energy efficient technology should become the future focus of wastewater treatment.

Integration of Hydrogeophysical Datasets for Improved Water Resource Management in Irrigated Systems

NASA Astrophysics Data System (ADS)

Finkenbiner, C. E.; Franz, T. E.; Heeren, D.; Gibson, J. P.; Russell, M. V.

2016-12-01

With an average irrigation water use efficiency of approximately 45% in the United States, improvements in water management can be made within agricultural systems. Advancements in precision irrigation technologies allow application rates and times to vary within a field. Current limitations in applying these technologies are often attributed to the quantification of soil spatial variability. This work aims to increase our understanding of soil hydrologic fluxes at intermediate spatial scales. Field capacity and wilting point values for a field near Sutherland, NE were downloaded from the USDA SSURGO database. Stationary and roving cosmic-ray neutron probes (CRNP) (sensor measurement volume of 300 m radius sphere and 30 cm vertical soil depth) were combined in order to characterize the spatial and temporal patterns of soil moisture at the site. We used a data merging technique to produce a statistical daily soil moisture product at a range of key spatial scales in support of current irrigation technologies: the individual sprinkler ( 102 m2) for variable rate irrigation, the individual wedge ( 103 m2) for variable speed irrigation, and the quarter section (0.82 km2) for uniform rate irrigation. The results show our CRNP "observed" field capacity was higher compared to the SSURGO products. The measured hydraulic properties from sixty-two soil cores collected from the field correlate well with our "observed" CRNP values. We hypothesize that our results, when provided to irrigators, will decrease water losses due to runoff and deep percolation as sprinkler managers can better estimate irrigation application depths and times in relation to soil moisture depletion below field capacity and above maximum allowable depletion. The incorporation of the CRNP into current irrigation practices has the potential to greatly increase agricultural water use efficiency. Moreover, the defined soil hydraulic properties at various spatial scales offers additional valuable datasets for the land surface modeling community.

Fuzzy support vector machines for adaptive Morse code recognition.

PubMed

Yang, Cheng-Hong; Jin, Li-Cheng; Chuang, Li-Yeh

2006-11-01

Morse code is now being harnessed for use in rehabilitation applications of augmentative-alternative communication and assistive technology, facilitating mobility, environmental control and adapted worksite access. In this paper, Morse code is selected as a communication adaptive device for persons who suffer from muscle atrophy, cerebral palsy or other severe handicaps. A stable typing rate is strictly required for Morse code to be effective as a communication tool. Therefore, an adaptive automatic recognition method with a high recognition rate is needed. The proposed system uses both fuzzy support vector machines and the variable-degree variable-step-size least-mean-square algorithm to achieve these objectives. We apply fuzzy memberships to each point, and provide different contributions to the decision learning function for support vector machines. Statistical analyses demonstrated that the proposed method elicited a higher recognition rate than other algorithms in the literature.

Methodological Variability Using Electronic Nose Technology For Headspace Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knobloch, Henri; Turner, Claire; Spooner, Andrew

Since the idea of electronic noses was published, numerous electronic nose (e-nose) developments and applications have been used in analyzing solid, liquid and gaseous samples in the food and automotive industry or for medical purposes. However, little is known about methodological pitfalls that might be associated with e-nose technology. Some of the methodological variation caused by changes in ambient temperature, using different filters and changes in mass flow rates are described. Reasons for a lack of stability and reproducibility are given, explaining why methodological variation influences sensor responses and why e-nose technology may not always be sufficiently robust for headspacemore » analysis. However, the potential of e-nose technology is also discussed.« less

Polycyclic Aromatic Hydrocarbons-Associated MicroRNAs and Heart Rate Variability in Coke Oven Workers.

PubMed

Huang, Suli; Deng, Qifei; Feng, Jing; Zhang, Xiaomin; Dai, Xiayun; Li, Lu; Yang, Binyao; Wu, Tangchun; Cheng, Jinquan

2016-01-01

We aimed to evaluate the association between polycyclic aromatic hydrocarbons (PAHs)-related microRNAs (miRNAs) and heart rate variability indices in coke oven workers. We recruited 365 male coke oven workers and measured urinary PAH metabolites by gas chromatography-mass spectrometry. Five heart rate variability indices were measured using three-channel Holter monitor. Six miRNAs were detected by TaqMan miRNA assays (Life Technologies, Foster City, CA). miR-24-3p, miR-27a-3p, miR-142-5p, and miR-320b were negatively associated with the root mean of square of successive differences between adjacent normal NN intervals (RMSSD) (P(trend) = 0.006, 0.047, 0.019, 0.011, respectively). miR-142-5p and miR-320b were also negatively associated with standard deviation of all normal to normal NN intervals (SDNN) (P(trend) = 0.01 and 0.035). miR-24-3p, miR-27a-3p, and miR-320b were significantly interacted with multiple PAH metabolites and influenced heart rate variability indices, whereas miR-24-3p also significantly interacted with smoking to influence low frequency (P(interaction) < 0.05 for all). Plasma miRNAs might act as potential biomarkers for the adverse effect of PAH exposure on the cardiovascular system.

Spatialization of Brazilian pig production: relationship between productive, physical, environmental, and socio-economic variables.

PubMed

da Silva, Isabel C M; Bremm, Bárbara; Teixeira, Jennifer L; Costa, Nathalia S; Barcellos, Júlio O J; Braccini, José; Cesconeto, Robson J; McManus, Concepta

2017-06-01

Brazilian pig production spans over a large territory encompassing regions of different climatic and socio-economic realities. Production, physical, socio-economic, and environmental data were used to characterize pig production in the country. Multivariate analysis evaluated indices including number productivity, production levels, and income from pigs, together with the average area of pig farm and socio-economic variables such as municipal human development index, technical guidance received from agricultural cooperatives and industrial companies, number of family farms, and offtake; and finally, environmental variables: latitude, longitude, annual temperature range, solar radiation index, as well as temperature and humidity index. The Southern region has the largest herd, number of pigs sold/sow, and offtake rate (p < 0.05), followed by the Midwest and Southeast. No significant correlations were seen between production rates and productivity with the socio-economic and environmental variables in the regions of Brazil. Production indexes, productivity, and offtake rate discriminated Northeast and Midwest and Northeast and Southeast regions. The Northern region, with a large area, has few and far-between farms that rear pigs for subsistence. The Northeast region has large herds, but low productivity. Number of slaughtered pigs has been variable over the past three decades, with few states responsible for maintaining high production in Brazil. However, the activity can be effective in any region of the country with technology and technical assistance adapted to regional characteristics.

Price elasticity reconsidered: Panel estimation of an agricultural water demand function

NASA Astrophysics Data System (ADS)

Schoengold, Karina; Sunding, David L.; Moreno, Georgina

2006-09-01

Using panel data from a period of water rate reform, this paper estimates the price elasticity of irrigation water demand. Price elasticity is decomposed into the direct effect of water management and the indirect effect of water price on choice of output and irrigation technology. The model is estimated using an instrumental variables strategy to account for the endogeneity of technology and output choices in the water demand equation. Estimation results indicate that the price elasticity of agricultural water demand is -0.79, which is greater than that found in previous studies.

Crumb rubber filtration: a potential technology for ballast water treatment.

PubMed

Tang, Zhijian; Butkus, Michael A; Xie, Yuefeng F

2006-05-01

The removal of turbidity, particles, phytoplankton and zooplankton in water by crumb rubber filtration was investigated. A substantial reduction was achieved. Of the three variables, filter depth, media size and filtration rate, media size had the most significant influence. Smaller media size favored higher removal efficiency of all targeted matter. There was no apparent relationship between removal efficiency and filter depth. Higher filtration rate resulted in lower removal efficiency and higher head loss. Compared with conventional granular media filters, crumb rubber filters required less backwash, and developed lower head loss. Consequently crumb rubber filters could be run for a longer time or allow a higher filtration rate. The results also indicate that the crumb rubber filtration alone did not achieve the target removal of invasive species. However, crumb rubber filtration could potentially be used as a primary treatment technology to enhance the efficiency of a secondary treatment process (e.g., disinfection).

Positive technology: a free mobile platform for the self-management of psychological stress.

PubMed

Gaggioli, Andrea; Cipresso, Pietro; Serino, Silvia; Campanaro, Danilo Marco; Pallavicini, Federica; Wiederhold, Brenda K; Riva, Giuseppe

2014-01-01

We describe the main features and preliminary evaluation of Positive Technology, a free mobile platform for the self-management of psychological stress (http://positiveapp.info/). The mobile platform features three main components: (i) guided relaxation, which provides the user with the opportunity of browsing a gallery of relaxation music and video-narrative resources for reducing stress; (ii) 3D biofeedback, which helps the user learning to control his/her responses, by visualizing variations of heart rate in an engaging 3D environment; (iii) stress tracking, by the recording of heart rate and self-reports. We evaluated the Positive Technology app in an online trial involving 32 participants, out of which 7 used the application in combination with the wrist sensor. Overall, feedback from users was satisfactory and the analysis of data collected online indicated the capability of the app for reducing perceived stress levels. A future goal is to improve the usability of the application and include more advanced stress monitoring features, based on the analysis of heart rate variability indexes.

Site-specific management of cotton root rot using airborne and satellite imagery and variable rate technology

USDA-ARS?s Scientific Manuscript database

Cotton root rot is a serious cotton disease that can now be effectively controlled with Topguard Terra Fungicide. However, its recurrence in the same areas year after year makes fungicide application only to infested areas more effective and economical than uniform application. Base on 17 years of r...

75 FR 41845 - Energy Conservation Program for Certain Commercial and Industrial Equipment: Decision and Order...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-19

... conditioners and heat pumps. The waiver is specific to the Sanyo variable capacity ECO-i (commercial) multi... in this notice to test and rate its ECO-i multi-split products. DATES: This Decision and Order is..., Building Technologies Program, Mailstop EE-2J, 1000 Independence Avenue, SW., Washington, DC 20585-0121...

Climatic shocks associate with innovation in science and technology.

PubMed

De Dreu, Carsten K W; van Dijk, Mathijs A

2018-01-01

Human history is shaped by landmark discoveries in science and technology. However, across both time and space the rate of innovation is erratic: Periods of relative inertia alternate with bursts of creative science and rapid cascades of technological innovations. While the origins of the rise and fall in rates of discovery and innovation remain poorly understood, they may reflect adaptive responses to exogenously emerging threats and pressures. Here we examined this possibility by fitting annual rates of scientific discovery and technological innovation to climatic variability and its associated economic pressures and resource scarcity. In time-series data from Europe (1500-1900CE), we indeed found that rates of innovation are higher during prolonged periods of cold (versus warm) surface temperature and during the presence (versus absence) of volcanic dust veils. This negative temperature-innovation link was confirmed in annual time-series for France, Germany, and the United Kingdom (1901-1965CE). Combined, across almost 500 years and over 5,000 documented innovations and discoveries, a 0.5°C increase in temperature associates with a sizable 0.30-0.60 standard deviation decrease in innovation. Results were robust to controlling for fluctuations in population size. Furthermore, and consistent with economic theory and micro-level data on group innovation, path analyses revealed that the relation between harsher climatic conditions between 1500-1900CE and more innovation is mediated by climate-induced economic pressures and resource scarcity.

Different Perspectives on Technology Acceptance: The Role of Technology Type and Age

NASA Astrophysics Data System (ADS)

Arning, Katrin; Ziefle, Martina

Although eHealth technologies offer an enormous potential to improve healthcare, the knowledge about key determinants of acceptance for eHealth technology is restricted. While the underlying technology of eHealth technologies and Information and Communication technology (ICT) is quite similar, utilization contexts and using motives are quite different. In order to explore the role of technology type on acceptance, we contrasted central application characteristics of both technology types using the scenario technique. A questionnaire was administered (n = 104) measuring individual variables (age, gender) and attitudes regarding an eHealth application (blood sugar meter) in contrast to an ICT device (Personal Digital Assistant, PDA). Older users basically approved the utilization of health-related technologies and perceived lower usability barriers. In addition, we identified main utilization motives of eHealth technology and technology-specific acceptance patterns, especially regarding issues of data safety in the eHealth context. Effects of age and gender in acceptance ratings suggest a differential perspective on eHealth acceptance. Finally, practical interventions were derived in order to support eHealth device design and to promote acceptance of eHealth technology.

Variable input observer for state estimation of high-rate dynamics

NASA Astrophysics Data System (ADS)

Hong, Jonathan; Cao, Liang; Laflamme, Simon; Dodson, Jacob

2017-04-01

High-rate systems operating in the 10 μs to 10 ms timescale are likely to experience damaging effects due to rapid environmental changes (e.g., turbulence, ballistic impact). Some of these systems could benefit from real-time state estimation to enable their full potential. Examples of such systems include blast mitigation strategies, automotive airbag technologies, and hypersonic vehicles. Particular challenges in high-rate state estimation include: 1) complex time varying nonlinearities of system (e.g. noise, uncertainty, and disturbance); 2) rapid environmental changes; 3) requirement of high convergence rate. Here, we propose using a Variable Input Observer (VIO) concept to vary the input space as the event unfolds. When systems experience high-rate dynamics, rapid changes in the system occur. To investigate the VIO's potential, a VIO-based neuro-observer is constructed and studied using experimental data collected from a laboratory impact test. Results demonstrate that the input space is unique to different impact conditions, and that adjusting the input space throughout the dynamic event produces better estimations than using a traditional fixed input space strategy.

Technology use and interest among low-income parents of young children: differences by age group and ethnicity.

PubMed

Swindle, Taren M; Ward, Wendy L; Whiteside-Mansell, Leanne; Bokony, Patti; Pettit, Dawn

2014-01-01

To examine demographic differences in frequency of use of technologies and interest in receiving nutrition information via technology by low-income parents and caregivers. Descriptive, cross-sectional study. Head Start and state-funded child care programs. A total of 806 parents and caregivers from low-income families. A 20-item survey assessed frequency of use and interest in technologies (dependent variables) and collected participant age and ethnicity (independent variables). Multivariate ANOVA analysis investigated whether age, ethnicity, and their interactions were related to frequency of use and interest in technology types. Daily rates of usage for Internet, text messaging, and cell phone use were over 60%. However, Twitter and blogs were accessed daily by < 13% of respondents. The omnibus 2-way interaction of ethnicity and age was nonsignificant. However, main effects for ethnicity (Wilks' λ = .85; F = 3.13; P < .001) and age (Wilks' λ = .89; F = 2.29; P < .001) were observed. Facebook, e-mail, texting, and smartphone applications may be innovative modalities to engage with low-income parents and caregivers aged ≤ 45. However, some strategies may be ineffective for reaching Hispanic families as they reported less use of the Internet, Facebook, and e-mail as well as less interest in e-mail. Published by Elsevier Inc.

Predictors of student satisfaction in distance-delivered graduate nursing courses: what matters most?

PubMed

Debourgh, Gregory A

2003-01-01

This article describes a study designed to investigate graduate nursing students' satisfaction with a course taught via interactive video teleconferencing (IVT) and the World Wide Web/Internet (WWW/INT). A correlational research design examined the relationships among 5 learner attributes and 3 instructional variables and student satisfaction. Regression analyses identified learner attributes and instructional variables predictive of student satisfaction. Forty-three graduate nurse students were surveyed using a 59-item Student Satisfaction Survey (SSS). Learner attribute predictors included: (1) previous technology courses, (2) technology competence, (3) between-class technology usage, (4) age, and (5) remote-site group size. Instructional predictors were clustered into 3 dimensions: instructor/instruction, technology, and course management. Student satisfaction was a composite of overall satisfaction with the course and comparison with conventional classroom courses. Instructor/instruction explained 21 percent of the variance in course satisfaction scores. Overall instructor rating strongly correlated with satisfaction. The most potent finding was that good pedagogy is important to students' perceived satisfaction with distance education. Students acclimate to the instructional reality-traditional, campus-based face-to-face instruction, or technology-mediated distance education-and once accustomed, it is the quality and effectiveness of instructor and instruction, not the technology, that is associated with satisfaction. The findings of this study provide essential information to faculty responsible for the design and delivery of effective instruction and to students pursuing flexible and convenient options for advanced education.

The Influence of Methylphenidate on Hyperactivity and Attention Deficits in Children With ADHD: A Virtual Classroom Test.

PubMed

Mühlberger, A; Jekel, K; Probst, T; Schecklmann, M; Conzelmann, A; Andreatta, M; Rizzo, A A; Pauli, P; Romanos, M

2016-05-13

This study compares the performance in a continuous performance test within a virtual reality classroom (CPT-VRC) between medicated children with ADHD, unmedicated children with ADHD, and healthy children. N = 94 children with ADHD (n = 26 of them received methylphenidate and n = 68 were unmedicated) and n = 34 healthy children performed the CPT-VRC. Omission errors, reaction time/variability, commission errors, and body movements were assessed. Furthermore, ADHD questionnaires were administered and compared with the CPT-VRC measures. The unmedicated ADHD group exhibited more omission errors and showed slower reaction times than the healthy group. Reaction time variability was higher in the unmedicated ADHD group compared with both the healthy and the medicated ADHD group. Omission errors and reaction time variability were associated with inattentiveness ratings of experimenters. Head movements were correlated with hyperactivity ratings of parents and experimenters. Virtual reality is a promising technology to assess ADHD symptoms in an ecologically valid environment. © The Author(s) 2016.

What we have learned about intrapartum fetal monitoring trials in the MFMU Network.

PubMed

Bloom, Steven L; Belfort, Michael; Saade, George

2016-08-01

The vast majority of pregnant women are subjected to electronic fetal heart monitoring during labor. There is limited evidence to support its benefit compared with intermittent auscultation. In addition, there is significant variability in interpretation and its false-positive rate is high. The latter may have contributed to the rise in operative deliveries. In order to address the critical need for better approaches to intrapartum monitoring, the MFMU Network has completed two large multisite randomized trials, one to evaluate fetal pulse oximetry and the other to evaluate fetal ECG ST segment analysis (STAN). Both of these technologies had been approved for clinical use in the United States based on prior smaller trials. These technologies were evaluated in laboring women near term and their primary outcomes were overall cesarean delivery for the oximetry trial and a composite adverse neonatal outcome for STAN. Both the trials failed to show a benefit of the technology, neither in the rates of operative deliveries nor in the rates of adverse neonatal outcomes. The experience with these trials, summarized in this report, highlights the need for rigorous evidence before introduction of new technology into clinical practice and provides a blueprint for future trials to address the need for better intrapartum monitoring approaches. Copyright © 2016 Elsevier Inc. All rights reserved.

Technologies Assessing Limb Bradykinesia in Parkinson's Disease.

PubMed

Hasan, Hasan; Athauda, Dilan S; Foltynie, Thomas; Noyce, Alastair J

2017-01-01

The MDS-UPDRS (Movement Disorders Society - Unified Parkinson's Disease Rating Scale) is the most widely used scale for rating impairment in PD. Subscores measuring bradykinesia have low reliability that can be subject to rater variability. Novel technological tools can be used to overcome such issues. To systematically explore and describe the available technologies for measuring limb bradykinesia in PD that were published between 2006 and 2016. A systematic literature search using PubMed (MEDLINE), IEEE Xplore, Web of Science, Scopus and Engineering Village (Compendex and Inspec) databases was performed to identify relevant technologies published until 18 October 2016. 47 technologies assessing bradykinesia in PD were identified, 17 of which offered home and clinic-based assessment whilst 30 provided clinic-based assessment only. Of the eligible studies, 7 were validated in a PD patient population only, whilst 40 were tested in both PD and healthy control groups. 19 of the 47 technologies assessed bradykinesia only, whereas 28 assessed other parkinsonian features as well. 33 technologies have been described in additional PD-related studies, whereas 14 are not known to have been tested beyond the pilot phase. Technology based tools offer advantages including objective motor assessment and home monitoring of symptoms, and can be used to assess response to intervention in clinical trials or routine care. This review provides an up-to-date repository and synthesis of the current literature regarding technology used for assessing limb bradykinesia in PD. The review also discusses the current trends with regards to technology and discusses future directions in development.

Site-specific management of cotton root rot using airborne and high resolution satellite imagery and variable rate technology

USDA-ARS?s Scientific Manuscript database

Cotton root rot is a century-old cotton disease that can now be effectively controlled with Topguard Terra Fungicide. As this disease tends to occur in the same general areas within fields in recurring years, site-specific application of the fungicide only to the infested areas can be more effective...

Paving the way for a gold standard of care for infertility treatment: improving outcomes through standardization of laboratory procedures.

PubMed

Schoolcraft, William; Meseguer, Marcos

2017-10-01

Infertility affects over 70 million couples globally. Access to, and interest in, assisted reproductive technologies is growing worldwide, with more couples seeking medical intervention to conceive, in particular by IVF. Despite numerous advances in IVF techniques since its first success in 1978, almost half of the patients treated remain childless. The multifactorial nature of IVF treatment means that success is dependent on many variables. Therefore, it is important to examine how each variable can be optimized to achieve the best possible outcomes for patients. The current approach to IVF is fragmented, with various protocols in use. A systematic approach to establishing optimum best practices may improve IVF success and live birth rates. Our vision of the future is that technological advancements in the laboratory setting are standardized and universally adopted to enable a gold standard of care. Implementation of best practices for laboratory procedures will enable clinicians to generate high-quality gametes, and to produce and identify gametes and embryos of maximum viability and implantation potential, which should contribute to improving take-home healthy baby rates. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Implantation of radiotelemetry transmitters yielding data on ECG, heart rate, core body temperature and activity in free-moving laboratory mice.

PubMed

Cesarovic, Nikola; Jirkof, Paulin; Rettich, Andreas; Arras, Margarete

2011-11-21

The laboratory mouse is the animal species of choice for most biomedical research, in both the academic sphere and the pharmaceutical industry. Mice are a manageable size and relatively easy to house. These factors, together with the availability of a wealth of spontaneous and experimentally induced mutants, make laboratory mice ideally suited to a wide variety of research areas. In cardiovascular, pharmacological and toxicological research, accurate measurement of parameters relating to the circulatory system of laboratory animals is often required. Determination of heart rate, heart rate variability, and duration of PQ and QT intervals are based on electrocardiogram (ECG) recordings. However, obtaining reliable ECG curves as well as physiological data such as core body temperature in mice can be difficult using conventional measurement techniques, which require connecting sensors and lead wires to a restrained, tethered, or even anaesthetized animal. Data obtained in this fashion must be interpreted with caution, as it is well known that restraining and anesthesia can have a major artifactual influence on physiological parameters. Radiotelemetry enables data to be collected from conscious and untethered animals. Measurements can be conducted even in freely moving animals, and without requiring the investigator to be in the proximity of the animal. Thus, known sources of artifacts are avoided, and accurate and reliable measurements are assured. This methodology also reduces interanimal variability, thus reducing the number of animals used, rendering this technology the most humane method of monitoring physiological parameters in laboratory animals. Constant advancements in data acquisition technology and implant miniaturization mean that it is now possible to record physiological parameters and locomotor activity continuously and in realtime over longer periods such as hours, days or even weeks. Here, we describe a surgical technique for implantation of a commercially available telemetry transmitter used for continuous measurements of core body temperature, locomotor activity and biopotential (i.e. onelead ECG), from which heart rate, heart rate variability, and PQ and QT intervals can be established in freeroaming, untethered mice. We also present pre-operative procedures and protocols for post-operative intensive care and pain treatment that improve recovery, well-being and survival rates in implanted mice.

Variable Cycle Engine Technology Program Planning and Definition Study

NASA Technical Reports Server (NTRS)

Westmoreland, J. S.; Stern, A. M.

1978-01-01

The variable stream control engine, VSCE-502B, was selected as the base engine, with the inverted flow engine concept selected as a backup. Critical component technologies were identified, and technology programs were formulated. Several engine configurations were defined on a preliminary basis to serve as demonstration vehicles for the various technologies. The different configurations present compromises in cost, technical risk, and technology return. Plans for possible variably cycle engine technology programs were formulated by synthesizing the technology requirements with the different demonstrator configurations.

Informatics Technology Mimics Ecology: Dense, Mutualistic Collaboration Networks Are Associated with Higher Publication Rates

PubMed Central

Sorani, Marco D.

2012-01-01

Information technology (IT) adoption enables biomedical research. Publications are an accepted measure of research output, and network models can describe the collaborative nature of publication. In particular, ecological networks can serve as analogies for publication and technology adoption. We constructed network models of adoption of bioinformatics programming languages and health IT (HIT) from the literature. We selected seven programming languages and four types of HIT. We performed PubMed searches to identify publications since 2001. We calculated summary statistics and analyzed spatiotemporal relationships. Then, we assessed ecological models of specialization, cooperativity, competition, evolution, biodiversity, and stability associated with publications. Adoption of HIT has been variable, while scripting languages have experienced rapid adoption. Hospital systems had the largest HIT research corpus, while Perl had the largest language corpus. Scripting languages represented the largest connected network components. The relationship between edges and nodes was linear, though Bioconductor had more edges than expected and Perl had fewer. Spatiotemporal relationships were weak. Most languages shared a bioinformatics specialization and appeared mutualistic or competitive. HIT specializations varied. Specialization was highest for Bioconductor and radiology systems. Specialization and cooperativity were positively correlated among languages but negatively correlated among HIT. Rates of language evolution were similar. Biodiversity among languages grew in the first half of the decade and stabilized, while diversity among HIT was variable but flat. Compared with publications in 2001, correlation with publications one year later was positive while correlation after ten years was weak and negative. Adoption of new technologies can be unpredictable. Spatiotemporal relationships facilitate adoption but are not sufficient. As with ecosystems, dense, mutualistic, specialized co-habitation is associated with faster growth. There are rapidly changing trends in external technological and macroeconomic influences. We propose that a better understanding of how technologies are adopted can facilitate their development. PMID:22279593

Mechanisms and sources of radon entry in buildings constructed with modern technologies.

PubMed

Zhukovsky, M V; Vasilyev, A V

2014-07-01

To investigate the influence of modern building construction technologies on the accumulation of radon indoor, 20 rooms in buildings constructed using mostly monolithic concrete or aerated concrete blocks have been studied. Dominance of the diffusion mechanism of radon entry in buildings constructed with modern technologies has been established. As a result of computer simulations it was found that the main contribution to the variability of radon concentration was made by changes in the ventilation rate. At a low ventilation rate (<0.2 h(-1)) radon concentration above 200 Bq m(-3) can be observed for residential buildings. There is a need for the regulation of the radium-specific activity in building materials. According to the estimates of this study, the content of 226Ra in building materials should not exceed the value of 100 Bq kg(-1). © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

What explains usage of mobile physician-rating apps? Results from a web-based questionnaire.

PubMed

Bidmon, Sonja; Terlutter, Ralf; Röttl, Johanna

2014-06-11

Consumers are increasingly accessing health-related information via mobile devices. Recently, several apps to rate and locate physicians have been released in the United States and Germany. However, knowledge about what kinds of variables explain usage of mobile physician-rating apps is still lacking. This study analyzes factors influencing the adoption of and willingness to pay for mobile physician-rating apps. A structural equation model was developed based on the Technology Acceptance Model and the literature on health-related information searches and usage of mobile apps. Relationships in the model were analyzed for moderating effects of physician-rating website (PRW) usage. A total of 1006 randomly selected German patients who had visited a general practitioner at least once in the 3 months before the beginning of the survey were randomly selected and surveyed. A total of 958 usable questionnaires were analyzed by partial least squares path modeling and moderator analyses. The suggested model yielded a high model fit. We found that perceived ease of use (PEOU) of the Internet to gain health-related information, the sociodemographic variables age and gender, and the psychographic variables digital literacy, feelings about the Internet and other Web-based applications in general, patients' value of health-related knowledgeability, as well as the information-seeking behavior variables regarding the amount of daily private Internet use for health-related information, frequency of using apps for health-related information in the past, and attitude toward PRWs significantly affected the adoption of mobile physician-rating apps. The sociodemographic variable age, but not gender, and the psychographic variables feelings about the Internet and other Web-based applications in general and patients' value of health-related knowledgeability, but not digital literacy, were significant predictors of willingness to pay. Frequency of using apps for health-related information in the past and attitude toward PRWs, but not the amount of daily Internet use for health-related information, were significant predictors of willingness to pay. The perceived usefulness of the Internet to gain health-related information and the amount of daily Internet use in general did not have any significant effect on both of the endogenous variables. The moderation analysis with the group comparisons for users and nonusers of PRWs revealed that the attitude toward PRWs had significantly more impact on the adoption and willingness to pay for mobile physician-rating apps in the nonuser group. Important variables that contribute to the adoption of a mobile physician-rating app and the willingness to pay for it were identified. The results of this study are important for researchers because they can provide important insights about the variables that influence the acceptance of apps that allow for ratings of physicians. They are also useful for creators of mobile physician-rating apps because they can help tailor mobile physician-rating apps to the consumers' characteristics and needs.

What Explains Usage of Mobile Physician-Rating Apps? Results From a Web-Based Questionnaire

PubMed Central

Terlutter, Ralf; Röttl, Johanna

2014-01-01

Background Consumers are increasingly accessing health-related information via mobile devices. Recently, several apps to rate and locate physicians have been released in the United States and Germany. However, knowledge about what kinds of variables explain usage of mobile physician-rating apps is still lacking. Objective This study analyzes factors influencing the adoption of and willingness to pay for mobile physician-rating apps. A structural equation model was developed based on the Technology Acceptance Model and the literature on health-related information searches and usage of mobile apps. Relationships in the model were analyzed for moderating effects of physician-rating website (PRW) usage. Methods A total of 1006 randomly selected German patients who had visited a general practitioner at least once in the 3 months before the beginning of the survey were randomly selected and surveyed. A total of 958 usable questionnaires were analyzed by partial least squares path modeling and moderator analyses. Results The suggested model yielded a high model fit. We found that perceived ease of use (PEOU) of the Internet to gain health-related information, the sociodemographic variables age and gender, and the psychographic variables digital literacy, feelings about the Internet and other Web-based applications in general, patients’ value of health-related knowledgeability, as well as the information-seeking behavior variables regarding the amount of daily private Internet use for health-related information, frequency of using apps for health-related information in the past, and attitude toward PRWs significantly affected the adoption of mobile physician-rating apps. The sociodemographic variable age, but not gender, and the psychographic variables feelings about the Internet and other Web-based applications in general and patients’ value of health-related knowledgeability, but not digital literacy, were significant predictors of willingness to pay. Frequency of using apps for health-related information in the past and attitude toward PRWs, but not the amount of daily Internet use for health-related information, were significant predictors of willingness to pay. The perceived usefulness of the Internet to gain health-related information and the amount of daily Internet use in general did not have any significant effect on both of the endogenous variables. The moderation analysis with the group comparisons for users and nonusers of PRWs revealed that the attitude toward PRWs had significantly more impact on the adoption and willingness to pay for mobile physician-rating apps in the nonuser group. Conclusions Important variables that contribute to the adoption of a mobile physician-rating app and the willingness to pay for it were identified. The results of this study are important for researchers because they can provide important insights about the variables that influence the acceptance of apps that allow for ratings of physicians. They are also useful for creators of mobile physician-rating apps because they can help tailor mobile physician-rating apps to the consumers’ characteristics and needs. PMID:24918859

Advancements in noncontact, multiparameter physiological measurements using a webcam.

PubMed

Poh, Ming-Zher; McDuff, Daniel J; Picard, Rosalind W

2011-01-01

We present a simple, low-cost method for measuring multiple physiological parameters using a basic webcam. By applying independent component analysis on the color channels in video recordings, we extracted the blood volume pulse from the facial regions. Heart rate (HR), respiratory rate, and HR variability (HRV, an index for cardiac autonomic activity) were subsequently quantified and compared to corresponding measurements using Food and Drug Administration-approved sensors. High degrees of agreement were achieved between the measurements across all physiological parameters. This technology has significant potential for advancing personal health care and telemedicine.

The combined value of wind and solar power forecasting improvements and electricity storage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hodge, Bri-Mathias; Brancucci Martinez-Anido, Carlo; Wang, Qin

As the penetration rates of variable renewable energy increase, the value of power systems operation flexibility technology options, such as renewable energy forecasting improvements and electricity storage, is also assumed to increase. In this work, we examine the value of these two technologies, when used independently and concurrently, for two real case studies that represent the generation mixes for the California and Midcontinent Independent System Operators (CAISO and MISO). Since both technologies provide additional system flexibility they reduce operational costs and renewable curtailment for both generation mixes under study. Interestingly, the relative impacts are quite similar when both technologies aremore » used together. Though both flexibility options can solve some of the same issues that arise with high penetration levels of renewables, they do not seem to significantly increase or decrease the economic potential of the other technology.« less

The combined value of wind and solar power forecasting improvements and electricity storage

DOE PAGES

Hodge, Bri-Mathias; Brancucci Martinez-Anido, Carlo; Wang, Qin; ...

2018-02-12

As the penetration rates of variable renewable energy increase, the value of power systems operation flexibility technology options, such as renewable energy forecasting improvements and electricity storage, is also assumed to increase. In this work, we examine the value of these two technologies, when used independently and concurrently, for two real case studies that represent the generation mixes for the California and Midcontinent Independent System Operators (CAISO and MISO). Since both technologies provide additional system flexibility they reduce operational costs and renewable curtailment for both generation mixes under study. Interestingly, the relative impacts are quite similar when both technologies aremore » used together. Though both flexibility options can solve some of the same issues that arise with high penetration levels of renewables, they do not seem to significantly increase or decrease the economic potential of the other technology.« less

Forming a single layer of a composite powder based on the Ti-Nb system via selective laser melting (SLM)

NASA Astrophysics Data System (ADS)

Saprykin, A. A.; Sharkeev, Yu P.; Ibragimov, E. A.; Babakova, E. V.; Dudikhin, D. V.

2016-07-01

Alloys based on the titanium-niobium system are widely used in implant production. It is conditional, first of all, on the low modulus of elasticity and bio-inert properties of an alloy. These alloys are especially important for tooth replacement and orthopedic surgery. At present alloys based on the titanium-niobium system are produced mainly using conventional metallurgical methods. The further subtractive manufacturing an end product results in a lot of wastes, increasing, therefore, its cost. The alternative of these processes is additive manufacturing. Selective laser melting is a technology, which makes it possible to synthesize products of metal powders and their blends. The point of this technology is laser melting a layer of a powdered material; then a sintered layer is coated with the next layer of powder etc. Complex products and working prototypes are made on the base of this technology. The authors of this paper address to the issue of applying selective laser melting in order to synthesize a binary alloy of a composite powder based on the titanium-niobium system. A set of 10x10 mm samples is made in various process conditions. The samples are made by an experimental selective laser synthesis machine «VARISKAF-100MB». The machine provides adjustment of the following process variables: laser emission power, scanning rate and pitch, temperature of powder pre-heating, thickness of the layer to be sprinkled, and diameter of laser spot focusing. All samples are made in the preliminary vacuumized shielding atmosphere of argon. The porosity and thickness of the sintered layer related to the laser emission power are shown at various scanning rates. It is revealed that scanning rate and laser emission power are adjustable process variables, having the greatest effect on forming the sintered layer.

Predictors of Associate's Degree Completion in Engineering and Engineering Technologies

NASA Astrophysics Data System (ADS)

Reys-Nickel, Lynsey L.

The purpose of this ex post facto study was to describe completers and non-completers of associate's degree programs in engineering and engineering technologies and determine whether and to what extent completion in these programs is a function of selected student-related variables and institutional variables. Data from the 2004/2009 Beginning Postsecondary Students Longitudinal Study (BPS: 04/09) of associate's degree completers and non-completers in engineering and engineering technologies were accessed and analyzed through PowerStats, a web-based data analysis tool from National Center for Education Statistics (NCES). Descriptive data indicated that, proportionally, engineering and engineering technologies completers were mostly White, married, middle income, employed part-time, enrolled full-time, did not hold a high school diploma or certificate, completed Trigonometry/Algebra II, had a father who's highest education level was an associate's degree, but did not know their mother's highest level of education, completed remedial coursework, and started college with the goal of earning an associate's degree. While more males enrolled in the programs, males and females demonstrated similar completion rates, proportionally--with females showing a slightly higher percentage of completion. Results from the logistic regression further indicated that the variables significant to completion in associate's degree programs in engineering and engineering technologies were gender and enrollment size. Findings suggested that female students were more likely to earn the degree, and that the larger the institution, the more likely the student would become a completer. However, since a major limitation of the study was the small weighted sample size, the results of the study are inconclusive in terms of the extent to which the findings can be generalized to the population of students in associate's degree programs in engineering and engineering technologies. This study fills a gap in the literature of what is known about engineering and engineering technician students. It also contributes to the body of research on an understudied STEM educational and professional pathway, the associate's degree in engineering and engineering technologies.

Climatic shocks associate with innovation in science and technology

PubMed Central

van Dijk, Mathijs A.

2018-01-01

Human history is shaped by landmark discoveries in science and technology. However, across both time and space the rate of innovation is erratic: Periods of relative inertia alternate with bursts of creative science and rapid cascades of technological innovations. While the origins of the rise and fall in rates of discovery and innovation remain poorly understood, they may reflect adaptive responses to exogenously emerging threats and pressures. Here we examined this possibility by fitting annual rates of scientific discovery and technological innovation to climatic variability and its associated economic pressures and resource scarcity. In time-series data from Europe (1500–1900CE), we indeed found that rates of innovation are higher during prolonged periods of cold (versus warm) surface temperature and during the presence (versus absence) of volcanic dust veils. This negative temperature–innovation link was confirmed in annual time-series for France, Germany, and the United Kingdom (1901–1965CE). Combined, across almost 500 years and over 5,000 documented innovations and discoveries, a 0.5°C increase in temperature associates with a sizable 0.30–0.60 standard deviation decrease in innovation. Results were robust to controlling for fluctuations in population size. Furthermore, and consistent with economic theory and micro-level data on group innovation, path analyses revealed that the relation between harsher climatic conditions between 1500–1900CE and more innovation is mediated by climate-induced economic pressures and resource scarcity. PMID:29364910

Controls on Soil Organic Matter in Blue Carbon Ecosystems along the South Florida Coast

NASA Astrophysics Data System (ADS)

Smoak, J. M.; Rosenheim, B. E.; Moyer, R. P.; Radabaugh, K.; Chambers, L. G.; Lagomasino, D.; Lynch, J.; Cahoon, D. R.

2017-12-01

Coastal wetlands store disproportionately large amounts of carbon due to high rates of net primary productivity and slow microbial degradation of organic matter in water-saturated soils. Wide spatial and temporal variability in plant communities and soil biogeochemistry necessitate location-specific quantification of carbon stocks to improve current wetland carbon inventories and future projections. We apply field measurements, remote sensing technology, and spatiotemporal models to quantify regional carbon storage and to model future spatial variability of carbon stocks in mangroves and coastal marshes in Southwest Florida. We examine soil carbon accumulation and accretion rates on time scales ranging from decadal to millennial to project responses to climate change, including variations in inundation and salinity. Once freshwater and oligohaline wetlands are exposed to increased duration and spatial extent of inundation and salinity from seawater, soil redox potential, soil respiration, and the intensification of osmotic stress to vegetation and the soil microbial community can affect the soil C balance potentially increasing rates of mineralization.

Classic electrocardiogram-based and mobile technology derived approaches to heart rate variability are not equivalent.

PubMed

Guzik, Przemyslaw; Piekos, Caroline; Pierog, Olivia; Fenech, Naiman; Krauze, Tomasz; Piskorski, Jaroslaw; Wykretowicz, Andrzej

2018-05-01

We compared classic ECG-derived versus a mobile approach to heart rate variability (HRV) measurement. 29 young adult healthy volunteers underwent a simultaneous recording of heart rate using an ECG and a chest heart rate monitor at supine rest, during mental stress and active standing. Mean RR interval, Standard Deviation of Normal-to-Normal (SDNN) of RR intervals, and Root Mean Square of the Successive Differences (RMSSD) between RR intervals were computed in 168 pairs of 5-minute epochs by in-house software on a PC (only sinus beats) and by mobile application "ELITEHRV" on a smartphone (no beat type identification). ECG analysis showed that 33.9% of the recordings contained at least one non-sinus beat or artefact, the mobile app did not report this. The mean RR intervals were significantly longer (p = 0.0378), while SDNN (p = 0.0001) and RMSSD (p = 0.0199) were smaller for the mobile approach. Measures of identical HRV parameters by ECG-based and mobile approaches are not equivalent. Copyright © 2018 Elsevier B.V. All rights reserved.

Use of electric field sensors for recording respiration, heart rate, and stereotyped motor behaviors in the rodent home cage.

PubMed

Noble, Donald J; MacDowell, Camden J; McKinnon, Michael L; Neblett, Tamra I; Goolsby, William N; Hochman, Shawn

2017-02-01

Numerous environmental and genetic factors can contribute significantly to behavioral and cardiorespiratory variability observed experimentally. Affordable technologies that allow for noninvasive home cage capture of physio-behavioral variables should enhance understanding of inter-animal variability including after experimental interventions. We assessed whether EPIC electric field sensors (Plessey Semiconductors) embedded within or attached externally to a rodent's home cage could accurately record respiration, heart rate, and motor behaviors. Current systems for quantification of behavioral variables require expensive specialty equipment, while measures of respiratory and heart rate are often provided by surgically implanted or chronically affixed devices. Sensors accurately encoded imposed sinusoidal changes in electric field tested at frequencies ranging from 0.5-100Hz. Mini-metronome arm movements were easily detected, but response magnitude was highly distance dependent. Sensors accurately reported respiration during whole-body plethysmography. In anesthetized rodents, PVC tube-embedded sensors provided accurate mechanical detection of both respiratory and heart rate. Comparable success was seen in naturally behaving animals at rest or sleeping when sensors were attached externally. Video-verified motor behaviors (sniffing, grooming, chewing, and rearing) were detectable and largely separable by their characteristic voltage fluctuations. Larger movement-related events had comparably larger voltage dynamics that easily allowed for a broad approximation of overall motor activity. Spectrograms were used to quickly depict characteristic frequencies in long-lasting recordings, while filtering and thresholding software allowed for detection and quantification of movement-related physio-behavioral events. EPIC electric field sensors provide a means for affordable non-contact home cage detection of physio-behavioral variables. Copyright © 2016 Elsevier B.V. All rights reserved.

Methods and techniques for measuring gas emissions from agricultural and animal feeding operations.

PubMed

Hu, Enzhu; Babcock, Esther L; Bialkowski, Stephen E; Jones, Scott B; Tuller, Markus

2014-01-01

Emissions of gases from agricultural and animal feeding operations contribute to climate change, produce odors, degrade sensitive ecosystems, and pose a threat to public health. The complexity of processes and environmental variables affecting these emissions complicate accurate and reliable quantification of gas fluxes and production rates. Although a plethora of measurement technologies exist, each method has its limitations that exacerbate accurate quantification of gas fluxes. Despite a growing interest in gas emission measurements, only a few available technologies include real-time, continuous monitoring capabilities. Commonly applied state-of-the-art measurement frameworks and technologies were critically examined and discussed, and recommendations for future research to address real-time monitoring requirements for forthcoming regulation and management needs are provided.

Urban bound migration and rural investment: the case of Mexico.

PubMed

Silvers, A L; Crosson, P

1983-02-01

The authors investigate an agriculturally based policy for improving rural incomes and for retarding the rural-urban migration flow. The production of agricultural goods is characterized by a production function in which output increases with increases in agricultural labor inputs, capital, public infrastructure, land, and technology. Differences among regions in agricultural technology will reflect regional differences in education, the institutionalized form of productive organization, and differences in access to technological information channeled through more technically advanced cities. To pick up the effect of out-migration changes in state agricultural labor supply and upon agricultural output, the state's agricultural out-migration rate is included together with the agricultural labor force. The gross migrant flow between 2 locations is hypothesized to depend upon a set of variables influencing the individual's perception of the economic rate of return to be gained by moving, a set of variables reflecting the individual's propensity to relocate, the labor displacement effects of investments, and the at risk population at 1 location available to migrate. It is also taken into account that individuals differ in their response to information about origin and destination wage differentials and that individuals may or may not perceive a new ecnomic gain from migration but may base the decision on other considerations. Results of a statistical analysis using data from the Mexican census of population for 1960 and 1970 are: 1) size of the rural labor force was negatively associated with agricultural wages, contrary to expectations; 2) small farmers have benefited from the expansion of irrigation in Mexico; and 3) higher urban wages attract migration, and higher growth rate of agricultural income retards rural-urban migration. With respect to the 1950-60 decade both agricultural income and rural out-migration impacts could have been substantial but both the impact on local urban growth and on the rate of in-migration to the primate city would have been slight.

Valorisation of waste tyre by pyrolysis in a moving bed reactor.

PubMed

Aylón, E; Fernández-Colino, A; Murillo, R; Navarro, M V; García, T; Mastral, A M

2010-07-01

The aim of this work is to assess the behaviour of a moving bed reactor, based on a screw transporter design, in waste tyre pyrolysis under several experimental conditions. Waste tyre represents a significant problem in developed countries and it is necessary to develop new technology that could easily process big amounts of this potentially raw material. In this work, the influence of the main pyrolysis process variables (temperature, solid residence time, mass flow rate and inert gas flow) has been studied by a thorough analysis of product yields and properties. It has been found that regardless the process operational parameters, a total waste tyre devolatilisation is achieved, producing a pyrolytic carbon black with a volatile matter content under 5 wt.%. In addition, it has been proven that, in the range studied, the most influencing process variables are temperature and solid mass flow rate, mainly because both variables modify the gas residence time inside the reactor. In addition, it has been found that the modification of these variables affects to the chemical properties of the products. This fact is mainly associated to the different cracking reaction of the primary pyrolysis products. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

Valorisation of waste tyre by pyrolysis in a moving bed reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aylon, E.; Fernandez-Colino, A.; Murillo, R., E-mail: ramonm@icb.csic.e

2010-07-15

The aim of this work is to assess the behaviour of a moving bed reactor, based on a screw transporter design, in waste tyre pyrolysis under several experimental conditions. Waste tyre represents a significant problem in developed countries and it is necessary to develop new technology that could easily process big amounts of this potentially raw material. In this work, the influence of the main pyrolysis process variables (temperature, solid residence time, mass flow rate and inert gas flow) has been studied by a thorough analysis of product yields and properties. It has been found that regardless the process operationalmore » parameters, a total waste tyre devolatilisation is achieved, producing a pyrolytic carbon black with a volatile matter content under 5 wt.%. In addition, it has been proven that, in the range studied, the most influencing process variables are temperature and solid mass flow rate, mainly because both variables modify the gas residence time inside the reactor. In addition, it has been found that the modification of these variables affects to the chemical properties of the products. This fact is mainly associated to the different cracking reaction of the primary pyrolysis products.« less

Biomechanical variables and perception of comfort in running shoes with different cushioning technologies.

PubMed

Dinato, Roberto C; Ribeiro, Ana P; Butugan, Marco K; Pereira, Ivye L R; Onodera, Andrea N; Sacco, Isabel C N

2015-01-01

To investigate the relationships between the perception of comfort and biomechanical parameters (plantar pressure and ground reaction force) during running with four different types of cushioning technology in running shoes. Randomized repeated measures. Twenty-two men, recreational runners (18-45 years) ran 12km/h with running shoes with four different cushioning systems. Outcome measures included nine items related to perception of comfort and 12 biomechanical measures related to the ground reaction forces and plantar pressures. Repeated measure ANOVAs, Pearson correlation coefficients, and step-wise multiple regression analyses were employed (p≤0.05). No significant correlations were found between the perception of comfort and the biomechanical parameters for the four types of investigated shoes. Regression analysis revealed that 56% of the perceived general comfort can be explained by the variables push-off rate and pressure integral over the forefoot (p=0.015) and that 33% of the perception of comfort over the forefoot can be explained by second peak force and push-off rate (p=0.016). The results did not demonstrate significant relationships between the perception of comfort and the biomechanical parameters for the three types of shoes investigated (Gel, Air, and ethylene-vinyl acetate). Only the shoe with Adiprene+ technology had its general comfort and cushioning perception predicted by the loads over the forefoot. Thus, in general, one cannot predict the perception of comfort of a running shoe through impact and plantar pressure received. Copyright © 2013 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

The stork, the plow, rural social structure and tropical deforestation in poor countries?

PubMed

Rock, M T

1996-01-01

This study is an exploration of the relationships between income, demographic pressure, technological change in agriculture, and the structure of political economies in light of cross-country differences in deforestation. The study focuses on small farmers and shifting cultivation. The analysis is based on a model developed by Larson (1994) that accounts for rural poverty, rootlessness, and distribution of landholdings. Regression equations model the average annual rate of deforestation, the relative area under forests, and a recursive model that includes both the deforestation rate and the forested area. Deforestation was reasonably well explained by a dummy variable for Asia, a rank order variable of the amount of forested area in 1980, the gross domestic product per capita in 1990, the average annual population growth rate during 1981-90, and the percentage increase in value added to agriculture during 1981-90 in 1990 dollars. Findings indicate that a 10% increase in the population growth rate increased the rate of deforestation by 10.6%. A 10% increase in income per capita increased deforestation by 49.5%. The influence of income on deforestation followed Kuznet's U-shaped curve. The turning point for reduced deforestation was income of $3500 per capita. Only Central and South America are near this income level. An increase in 1 agricultural worker per household increased deforestation by 50%. A 10% increase in smallholders' share of agricultural land reduced deforestation by 3.4%. Countries with high rural rootlessness had 23.6% less relative area under forests, suggesting that rural rootlessness rather than poverty per se leads to deforestation. The recursive model shows that demographic pressures led to deforestation and were mediated by technological change. Political economy theories of deforestation received strong empirical support.

Technologies Assessing Limb Bradykinesia in Parkinson’s Disease

PubMed Central

Hasan, Hasan; Athauda, Dilan S.; Foltynie, Thomas; Noyce, Alastair J.

2017-01-01

Background: The MDS-UPDRS (Movement Disorders Society – Unified Parkinson’s Disease Rating Scale) is the most widely used scale for rating impairment in PD. Subscores measuring bradykinesia have low reliability that can be subject to rater variability. Novel technological tools can be used to overcome such issues. Objective: To systematically explore and describe the available technologies for measuring limb bradykinesia in PD that were published between 2006 and 2016. Methods: A systematic literature search using PubMed (MEDLINE), IEEE Xplore, Web of Science, Scopus and Engineering Village (Compendex and Inspec) databases was performed to identify relevant technologies published until 18 October 2016. Results: 47 technologies assessing bradykinesia in PD were identified, 17 of which offered home and clinic-based assessment whilst 30 provided clinic-based assessment only. Of the eligible studies, 7 were validated in a PD patient population only, whilst 40 were tested in both PD and healthy control groups. 19 of the 47 technologies assessed bradykinesia only, whereas 28 assessed other parkinsonian features as well. 33 technologies have been described in additional PD-related studies, whereas 14 are not known to have been tested beyond the pilot phase. Conclusion: Technology based tools offer advantages including objective motor assessment and home monitoring of symptoms, and can be used to assess response to intervention in clinical trials or routine care. This review provides an up-to-date repository and synthesis of the current literature regarding technology used for assessing limb bradykinesia in PD. The review also discusses the current trends with regards to technology and discusses future directions in development. PMID:28222539

High-efficiency reconciliation for continuous variable quantum key distribution

NASA Astrophysics Data System (ADS)

Bai, Zengliang; Yang, Shenshen; Li, Yongmin

2017-04-01

Quantum key distribution (QKD) is the most mature application of quantum information technology. Information reconciliation is a crucial step in QKD and significantly affects the final secret key rates shared between two legitimate parties. We analyze and compare various construction methods of low-density parity-check (LDPC) codes and design high-performance irregular LDPC codes with a block length of 106. Starting from these good codes and exploiting the slice reconciliation technique based on multilevel coding and multistage decoding, we realize high-efficiency Gaussian key reconciliation with efficiency higher than 95% for signal-to-noise ratios above 1. Our demonstrated method can be readily applied in continuous variable QKD.

Plastics and cardiovascular health: phthalates may disrupt heart rate variability and cardiovascular reactivity.

PubMed

Jaimes, Rafael; Swiercz, Adam; Sherman, Meredith; Muselimyan, Narine; Marvar, Paul J; Posnack, Nikki Gillum

2017-11-01

Plastics have revolutionized medical device technology, transformed hematological care, and facilitated modern cardiology procedures. Despite these advances, studies have shown that phthalate chemicals migrate out of plastic products and that these chemicals are bioactive. Recent epidemiological and research studies have suggested that phthalate exposure adversely affects cardiovascular function. Our objective was to assess the safety and biocompatibility of phthalate chemicals and resolve the impact on cardiovascular and autonomic physiology. Adult mice were implanted with radiofrequency transmitters to monitor heart rate variability, blood pressure, and autonomic regulation in response to di-2-ethylhexyl-phthalate (DEHP) exposure. DEHP-treated animals displayed a decrease in heart rate variability (-17% SD of normal beat-to-beat intervals and -36% high-frequency power) and an exaggerated mean arterial pressure response to ganglionic blockade (31.5% via chlorisondamine). In response to a conditioned stressor, DEHP-treated animals displayed enhanced cardiovascular reactivity (-56% SD major axis Poincarè plot) and prolonged blood pressure recovery. Alterations in cardiac gene expression of endothelin-1, angiotensin-converting enzyme, and nitric oxide synthase may partly explain these cardiovascular alterations. This is the first study to show an association between phthalate chemicals that are used in medical devices with alterations in autonomic regulation, heart rate variability, and cardiovascular reactivity. Because changes in autonomic balance often precede clinical manifestations of hypertension, atherosclerosis, and conduction abnormalities, future studies are warranted to assess the downstream impact of plastic chemical exposure on end-organ function in sensitive patient populations. This study also highlights the importance of adopting safer biomaterials, chemicals, and/or surface coatings for use in medical devices. NEW & NOTEWORTHY Phthalates are widely used in the manufacturing of consumer and medical products. In the present study, di-2-ethylhexyl-phthalate exposure was associated with alterations in heart rate variability and cardiovascular reactivity. This highlights the importance of investigating the impact of phthalates on health and identifying suitable alternatives for medical device manufacturing. Copyright © 2017 the American Physiological Society.

Evaluation of a Teleform-based data collection system: a multi-center obesity research case study.

PubMed

Jenkins, Todd M; Wilson Boyce, Tawny; Akers, Rachel; Andringa, Jennifer; Liu, Yanhong; Miller, Rosemary; Powers, Carolyn; Ralph Buncher, C

2014-06-01

Utilizing electronic data capture (EDC) systems in data collection and management allows automated validation programs to preemptively identify and correct data errors. For our multi-center, prospective study we chose to use TeleForm, a paper-based data capture software that uses recognition technology to create case report forms (CRFs) with similar functionality to EDC, including custom scripts to identify entry errors. We quantified the accuracy of the optimized system through a data audit of CRFs and the study database, examining selected critical variables for all subjects in the study, as well as an audit of all variables for 25 randomly selected subjects. Overall we found 6.7 errors per 10,000 fields, with similar estimates for critical (6.9/10,000) and non-critical (6.5/10,000) variables-values that fall below the acceptable quality threshold of 50 errors per 10,000 established by the Society for Clinical Data Management. However, error rates were found to widely vary by type of data field, with the highest rate observed with open text fields. Copyright © 2014 Elsevier Ltd. All rights reserved.

Next Generation Mass Memory Architecture

NASA Astrophysics Data System (ADS)

Herpel, H.-J.; Stahle, M.; Lonsdorfer, U.; Binzer, N.

2010-08-01

Future Mass Memory units will have to cope with various demanding requirements driven by onboard instruments (optical and SAR) that generate a huge amount of data (>10TBit) at a data rate > 6 Gbps. For downlink data rates around 3 Gbps will be feasible using latest ka-band technology together with Variable Coding and Modulation (VCM) techniques. These high data rates and storage capacities need to be effectively managed. Therefore, data structures and data management functions have to be improved and adapted to existing standards like the Packet Utilisation Standard (PUS). In this paper we will present a highly modular and scalable architectural approach for mass memories in order to support a wide range of mission requirements.

An FPGA design of generalized low-density parity-check codes for rate-adaptive optical transport networks

NASA Astrophysics Data System (ADS)

Zou, Ding; Djordjevic, Ivan B.

2016-02-01

Forward error correction (FEC) is as one of the key technologies enabling the next-generation high-speed fiber optical communications. In this paper, we propose a rate-adaptive scheme using a class of generalized low-density parity-check (GLDPC) codes with a Hamming code as local code. We show that with the proposed unified GLDPC decoder architecture, a variable net coding gains (NCGs) can be achieved with no error floor at BER down to 10-15, making it a viable solution in the next-generation high-speed fiber optical communications.

The effects of four variables on the intelligibility of synthesized sentences

NASA Astrophysics Data System (ADS)

Conroy, Carol; Raphael, Lawrence J.; Bell-Berti, Fredericka

2003-10-01

The experiments reported here examined the effects of four variables on the intelligibilty of synthetic speech: (1) listener age, (2) listener experience, (3) speech rate, and (4) the presence versus absence of interword pauses. The stimuli, eighty IEEE-Harvard Sentences, were generated by a DynaVox augmentative/alternative communication device equipped with a DECtalk synthesizer. The sentences were presented to four groups of 12 listeners each (children (9-11 years), teens (14-16 years), young adults (20-25 years), and adults (38-45 years). In the first experiment the sentences were heard at four rates: 105, 135, 165, and 195 wpm; in the second experiment half of the sentences (presented at two rates: 135 and 165 wpm), contained 250 ms interword pauses. Conditions in both experiments were counterbalanced and no sentence was presented twice. Results indicated a consistent decrease in error rates with increased exposure to the synthesized speech for all age groups. Error rates also varied inversely with listener age. Effects of rate variation were inconsistent across listener groups and between experiments. The presences versus absences of pauses affected listener groups differently: The youngest listeners had higher error rates, and the older listeners lower error rates when interword pauses were included in the stimuli. [Work supported by St. John's University and New York City Board of Education, Technology Solutions, District 75.

Investigation of visually induced motion sickness in dynamic 3D contents based on subjective judgment, heart rate variability, and depth gaze behavior.

PubMed

Wibirama, Sunu; Hamamoto, Kazuhiko

2014-01-01

Visually induced motion sickness (VIMS) is an important safety issue in stereoscopic 3D technology. Accompanying subjective judgment of VIMS with objective measurement is useful to identify not only biomedical effects of dynamic 3D contents, but also provoking scenes that induce VIMS, duration of VIMS, and user behavior during VIMS. Heart rate variability and depth gaze behavior are appropriate physiological indicators for such objective observation. However, there is no information about relationship between subjective judgment of VIMS, heart rate variability, and depth gaze behavior. In this paper, we present a novel investigation of VIMS based on simulator sickness questionnaire (SSQ), electrocardiography (ECG), and 3D gaze tracking. Statistical analysis on SSQ data shows that nausea and disorientation symptoms increase as amount of dynamic motions increases (nausea: p<;0.005; disorientation: p<;0.05). To reduce VIMS, SSQ and ECG data suggest that user should perform voluntary gaze fixation at one point when experiencing vertical motion (up or down) and horizontal motion (turn left and right) in dynamic 3D contents. Observation of 3D gaze tracking data reveals that users who experienced VIMS tended to have unstable depth gaze than ones who did not experience VIMS.

A preliminary analysis of human factors affecting the recognition accuracy of a discrete word recognizer for C3 systems

NASA Astrophysics Data System (ADS)

Yellen, H. W.

1983-03-01

Literature pertaining to Voice Recognition abounds with information relevant to the assessment of transitory speech recognition devices. In the past, engineering requirements have dictated the path this technology followed. But, other factors do exist that influence recognition accuracy. This thesis explores the impact of Human Factors on the successful recognition of speech, principally addressing the differences or variability among users. A Threshold Technology T-600 was used for a 100 utterance vocubalary to test 44 subjects. A statistical analysis was conducted on 5 generic categories of Human Factors: Occupational, Operational, Psychological, Physiological and Personal. How the equipment is trained and the experience level of the speaker were found to be key characteristics influencing recognition accuracy. To a lesser extent computer experience, time or week, accent, vital capacity and rate of air flow, speaker cooperativeness and anxiety were found to affect overall error rates.

The effect of health information technology implementation in Veterans Health Administration hospitals on patient outcomes.

PubMed

Spetz, Joanne; Burgess, James F; Phibbs, Ciaran S

2014-03-01

The impact of health information technology (HIT) in hospitals is dependent in large part on how it is used by nurses. This study examines the impact of HIT on the quality of care in hospitals in the Veterans Health Administration (VA), focusing on nurse-sensitive outcomes from 1995 to 2005. Data were obtained from VA databases and original data collection. Fixed-effects Poisson regression was used, with the dependent variables measured using the Agency for Healthcare Research and Quality Inpatient Quality Indicators and Patient Safety Indicators software. Dummy variables indicated when each facility began and completed implementation of each type of HIT. Other explanatory variables included hospital volume, patient characteristics, nurse characteristics, and a quadratic time trend. The start of computerized patient record implementation was associated with significantly lower mortality for two diagnoses but significantly higher pressure ulcer rates, and full implementation was associated with significantly more hospital-acquired infections. The start of bar-code medication administration implementation was linked to significantly lower mortality for one diagnosis, but full implementation was not linked to any change in patient outcomes. The commencement of HIT implementation had mixed effects on patient outcomes, and the completion of implementation had little or no effect on outcomes. This longitudinal study provides little support for the perception of VA staff and leaders that HIT has improved mortality rates or nurse-sensitive patient outcomes. Future research should examine patient outcomes associated with specific care processes affected by HIT. Copyright © 2014 Elsevier Inc. All rights reserved.

Entropy change of biological dynamics in COPD.

PubMed

Jin, Yu; Chen, Chang; Cao, Zhixin; Sun, Baoqing; Lo, Iek Long; Liu, Tzu-Ming; Zheng, Jun; Sun, Shixue; Shi, Yan; Zhang, Xiaohua Douglas

2017-01-01

In this century, the rapid development of large data storage technologies, mobile network technology, and portable medical devices makes it possible to measure, record, store, and track analysis of large amount of data in human physiological signals. Entropy is a key metric for quantifying the irregularity contained in physiological signals. In this review, we focus on how entropy changes in various physiological signals in COPD. Our review concludes that the entropy change relies on the types of physiological signals under investigation. For major physiological signals related to respiratory diseases, such as airflow, heart rate variability, and gait variability, the entropy of a patient with COPD is lower than that of a healthy person. However, in case of hormone secretion and respiratory sound, the entropy of a patient is higher than that of a healthy person. For mechanomyogram signal, the entropy increases with the increased severity of COPD. This result should give valuable guidance for the use of entropy for physiological signals measured by wearable medical device as well as for further research on entropy in COPD.

Parametric Cost Models for Space Telescopes

NASA Technical Reports Server (NTRS)

Stahl, H. Philip; Henrichs, Todd; Dollinger, Courtney

2010-01-01

Multivariable parametric cost models for space telescopes provide several benefits to designers and space system project managers. They identify major architectural cost drivers and allow high-level design trades. They enable cost-benefit analysis for technology development investment. And, they provide a basis for estimating total project cost. A survey of historical models found that there is no definitive space telescope cost model. In fact, published models vary greatly [1]. Thus, there is a need for parametric space telescopes cost models. An effort is underway to develop single variable [2] and multi-variable [3] parametric space telescope cost models based on the latest available data and applying rigorous analytical techniques. Specific cost estimating relationships (CERs) have been developed which show that aperture diameter is the primary cost driver for large space telescopes; technology development as a function of time reduces cost at the rate of 50% per 17 years; it costs less per square meter of collecting aperture to build a large telescope than a small telescope; and increasing mass reduces cost.

Technological Adoption and Organizational Adaptation: Developing a Model for Human Resource Management in an International Business Environment.

ERIC Educational Resources Information Center

Gattiker, Urs E.

A model of technological training has two dimensions: level of cultural stability and employee's level of cognitive ability. Each dimension has two variables. The variables of cultural stability are (1) technological adoption and organizational adaptation and (2) structure of work and work processes. For cognitive ability, the variables are…

Evaluation of software sensors for on-line estimation of culture conditions in an Escherichia coli cultivation expressing a recombinant protein.

PubMed

Warth, Benedikt; Rajkai, György; Mandenius, Carl-Fredrik

2010-05-03

Software sensors for monitoring and on-line estimation of critical bioprocess variables have mainly been used with standard bioreactor sensors, such as electrodes and gas analyzers, where algorithms in the software model have generated the desired state variables. In this article we propose that other on-line instruments, such as NIR probes and on-line HPLC, should be used to make more reliable and flexible software sensors. Five software sensor architectures were compared and evaluated: (1) biomass concentration from an on-line NIR probe, (2) biomass concentration from titrant addition, (3) specific growth rate from titrant addition, (4) specific growth rate from the NIR probe, and (5) specific substrate uptake rate and by-product rate from on-line HPLC and NIR probe signals. The software sensors were demonstrated on an Escherichia coli cultivation expressing a recombinant protein, green fluorescent protein (GFP), but the results could be extrapolated to other production organisms and product proteins. We conclude that well-maintained on-line instrumentation (hardware sensors) can increase the potential of software sensors. This would also strongly support the intentions with process analytical technology and quality-by-design concepts. 2010 Elsevier B.V. All rights reserved.

Optimization of non-thermal plasma efficiency in the simultaneous elimination of benzene, toluene, ethyl-benzene, and xylene from polluted airstreams using response surface methodology.

PubMed

Najafpoor, Ali Asghar; Jonidi Jafari, Ahmad; Hosseinzadeh, Ahmad; Khani Jazani, Reza; Bargozin, Hasan

2018-01-01

Treatment with a non-thermal plasma (NTP) is a new and effective technology applied recently for conversion of gases for air pollution control. This research was initiated to optimize the efficient application of the NTP process in benzene, toluene, ethyl-benzene, and xylene (BTEX) removal. The effects of four variables including temperature, initial BTEX concentration, voltage, and flow rate on the BTEX elimination efficiency were investigated using response surface methodology (RSM). The constructed model was evaluated by analysis of variance (ANOVA). The model goodness-of-fit and statistical significance was assessed using determination coefficients (R 2 and R 2 adj ) and the F-test. The results revealed that the R 2 proportion was greater than 0.96 for BTEX removal efficiency. The statistical analysis demonstrated that the BTEX removal efficiency was significantly correlated with the temperature, BTEX concentration, voltage, and flow rate. Voltage was the most influential variable affecting the dependent variable as it exerted a significant effect (p < 0.0001) on the response variable. According to the achieved results, NTP can be applied as a progressive, cost-effective, and practical process for treatment of airstreams polluted with BTEX in conditions of low residence time and high concentrations of pollutants.

Sensor-based demand controlled ventilation

DOE Office of Scientific and Technical Information (OSTI.GOV)

De Almeida, A.T.; Fisk, W.J.

In most buildings, occupancy and indoor pollutant emission rates vary with time. With sensor-based demand-controlled ventilation (SBDCV), the rate of ventilation (i.e., rate of outside air supply) also varies with time to compensate for the changes in pollutant generation. In other words, SBDCV involves the application of sensing, feedback and control to modulate ventilation. Compared to ventilation without feedback, SBDCV offers two potential advantages: (1) better control of indoor pollutant concentrations; and (2) lower energy use and peak energy demand. SBDCV has the potential to improve indoor air quality by increasing the rate of ventilation when indoor pollutant generation ratesmore » are high and occupants are present. SBDCV can also save energy by decreasing the rate of ventilation when indoor pollutant generation rates are low or occupants are absent. After providing background information on indoor air quality and ventilation, this report provides a relatively comprehensive discussion of SBDCV. Topics covered in the report include basic principles of SBDCV, sensor technologies, technologies for controlling air flow rates, case studies of SBDCV, application of SBDCV to laboratory buildings, and research needs. SBDCV appears to be an increasingly attractive technology option. Based on the review of literature and theoretical considerations, the application of SBDCV has the potential to be cost-effective in applications with the following characteristics: (a) a single or small number of dominant pollutants, so that ventilation sufficient to control the concentration of the dominant pollutants provides effective control of all other pollutants; (b) large buildings or rooms with unpredictable temporally variable occupancy or pollutant emission; and (c) climates with high heating or cooling loads or locations with expensive energy.« less

Increasing influence of heat stress on French maize yields from the 1960s to the 2030s

PubMed Central

Hawkins, Ed; Fricker, Thomas E; Challinor, Andrew J; Ferro, Christopher A T; Kit Ho, Chun; Osborne, Tom M

2013-01-01

Improved crop yield forecasts could enable more effective adaptation to climate variability and change. Here, we explore how to combine historical observations of crop yields and weather with climate model simulations to produce crop yield projections for decision relevant timescales. Firstly, the effects on historical crop yields of improved technology, precipitation and daily maximum temperatures are modelled empirically, accounting for a nonlinear technology trend and interactions between temperature and precipitation, and applied specifically for a case study of maize in France. The relative importance of precipitation variability for maize yields in France has decreased significantly since the 1960s, likely due to increased irrigation. In addition, heat stress is found to be as important for yield as precipitation since around 2000. A significant reduction in maize yield is found for each day with a maximum temperature above 32 °C, in broad agreement with previous estimates. The recent increase in such hot days has likely contributed to the observed yield stagnation. Furthermore, a general method for producing near-term crop yield projections, based on climate model simulations, is developed and utilized. We use projections of future daily maximum temperatures to assess the likely change in yields due to variations in climate. Importantly, we calibrate the climate model projections using observed data to ensure both reliable temperature mean and daily variability characteristics, and demonstrate that these methods work using retrospective predictions. We conclude that, to offset the projected increased daily maximum temperatures over France, improved technology will need to increase base level yields by 12% to be confident about maintaining current levels of yield for the period 2016–2035; the current rate of yield technology increase is not sufficient to meet this target. PMID:23504849

Collaborative Technologies and their Effect on Operator Workload in BMC2 Domains

DTIC Science & Technology

2007-06-01

Vogel, & Luck, 1998). 16 Like brain measurement techniques, measures of heart rate variability ( HRV ) have been used extensively as a physiological...et al., 2004; Helton, Dember, Warm, & Matthews, 1999; Matthews, et al., 1999; Szalma et al., 2004). Both state and trait anxiety were assessed using...the STAI (State-Trait Anxiety Inventory, Spielberger et al., 1983). Each dimension of the STAI (i.e., state and trait) consists of a 20-item

Estimation of body temperature rhythm based on heart activity parameters in daily life.

PubMed

Sooyoung Sim; Heenam Yoon; Hosuk Ryou; Kwangsuk Park

2014-01-01

Body temperature contains valuable health related information such as circadian rhythm and menstruation cycle. Also, it was discovered from previous studies that body temperature rhythm in daily life is related with sleep disorders and cognitive performances. However, monitoring body temperature with existing devices during daily life is not easy because they are invasive, intrusive, or expensive. Therefore, the technology which can accurately and nonintrusively monitor body temperature is required. In this study, we developed body temperature estimation model based on heart rate and heart rate variability parameters. Although this work was inspired by previous research, we originally identified that the model can be applied to body temperature monitoring in daily life. Also, we could find out that normalized Mean heart rate (nMHR) and frequency domain parameters of heart rate variability showed better performance than other parameters. Although we should validate the model with more number of subjects and consider additional algorithms to decrease the accumulated estimation error, we could verify the usefulness of this approach. Through this study, we expect that we would be able to monitor core body temperature and circadian rhythm from simple heart rate monitor. Then, we can obtain various health related information derived from daily body temperature rhythm.

Variability in Light-Duty Gasoline Vehicle Emission Factors from Trip-Based Real-World Measurements.

PubMed

Liu, Bin; Frey, H Christopher

2015-10-20

Using data obtained with portable emissions measurements systems (PEMS) on multiple routes for 100 gasoline vehicles, including passenger cars (PCs), passenger trucks (PTs), and hybrid electric vehicles (HEVs), variability in tailpipe emission rates was evaluated. Tier 2 emission standards are shown to be effective in lowering NOx, CO, and HC emission rates. Although PTs are larger, heavier vehicles that consume more fuel and produce more CO2 emissions, they do not necessarily produce more emissions of regulated pollutants compared to PCs. HEVs have very low emission rates compared to tier 2 vehicles under real-world driving. Emission factors vary with cycle average speed and road type, reflecting the combined impact of traffic control and traffic congestion. Compared to the slowest average speed and most congested cycles, optimal emission rates could be 50% lower for CO2, as much as 70% lower for NOx, 40% lower for CO, and 50% lower for HC. There is very high correlation among vehicles when comparing driving cycles. This has implications for how many cycles are needed to conduct comparisons between vehicles, such as when comparing fuels or technologies. Concordance between empirical and predicted emission rates using the U.S. Environmental Protection Agency's MOVES model was also assessed.

Assessing and modelling ecohydrologic processes at the agricultural field scale

NASA Astrophysics Data System (ADS)

Basso, Bruno

2015-04-01

One of the primary goals of agricultural management is to increase the amount of crop produced per unit of fertilizer and water used. World record corn yields demonstrated that water use efficiency can increase fourfold with improved agronomic management and cultivars able to tolerate high densities. Planting crops with higher plant density can lead to significant yield increases, and increase plant transpiration vs. soil water evaporation. Precision agriculture technologies have been adopted for the last twenty years but seldom have the data collected been converted to information that led farmers to different agronomic management. These methods are intuitively appealing, but yield maps and other spatial layers of data need to be properly analyzed and interpreted to truly become valuable. Current agro-mechanic and geospatial technologies allow us to implement a spatially variable plan for agronomic inputs including seeding rate, cultivars, pesticides, herbicides, fertilizers, and water. Crop models are valuable tools to evaluate the impact of management strategies (e.g., cover crops, tile drains, and genetically-improved cultivars) on yield, soil carbon sequestration, leaching and greenhouse gas emissions. They can help farmers identify adaptation strategies to current and future climate conditions. In this paper I illustrate the key role that precision agriculture technologies (yield mapping technologies, within season soil and crop sensing), crop modeling and weather can play in dealing with the impact of climate variability on soil ecohydrologic processes. Case studies are presented to illustrate this concept.

Wearable sensor-based objective assessment of motor symptoms in Parkinson's disease.

PubMed

Ossig, Christiana; Antonini, Angelo; Buhmann, Carsten; Classen, Joseph; Csoti, Ilona; Falkenburger, Björn; Schwarz, Michael; Winkler, Jürgen; Storch, Alexander

2016-01-01

Effective management and development of new treatment strategies of motor symptoms in Parkinson's disease (PD) largely depend on clinical rating instruments like the Unified PD rating scale (UPDRS) and the modified abnormal involuntary movement scale (mAIMS). Regarding inter-rater variability and continuous monitoring, clinical rating scales have various limitations. Patient-administered questionnaires such as the PD home diary to assess motor stages and fluctuations in late-stage PD are frequently used in clinical routine and as clinical trial endpoints, but diary/questionnaire are tiring, and recall bias impacts on data quality, particularly in patients with cognitive dysfunction or depression. Consequently, there is a strong need for continuous and objective monitoring of motor symptoms in PD for improving therapeutic regimen and for usage in clinical trials. Recent advances in battery technology, movement sensors such as gyroscopes, accelerometers and information technology boosted the field of objective measurement of movement in everyday life and medicine using wearable sensors allowing continuous (long-term) monitoring. This systematic review summarizes the current wearable sensor-based devices to objectively assess the various motor symptoms of PD.

A conceptual framework for evaluating variable speed generator options for wind energy applications

NASA Technical Reports Server (NTRS)

Reddoch, T. W.; Lipo, T. A.; Hinrichsen, E. N.; Hudson, T. L.; Thomas, R. J.

1995-01-01

Interest in variable speed generating technology has accelerated as greater emphasis on overall efficiency and superior dynamic and control properties in wind-electric generating systems are sought. This paper reviews variable speed technology options providing advantages and disadvantages of each. Furthermore, the dynamic properties of variable speed systems are contrasted with synchronous operation. Finally, control properties of variable speed systems are examined.

The impact of lecture attendance and other variables on how medical students evaluate faculty in a preclinical program.

PubMed

Martin, Stanley I; Way, David P; Verbeck, Nicole; Nagel, Rollin; Davis, John A; Vandre, Dale D

2013-07-01

High-quality audiovisual recording technology enables medical students to listen to didactic lectures without actually attending them. The authors wondered whether in-person attendance affects how students evaluate lecturers. This is a retrospective review of faculty evaluations completed by first- and second-year medical students at the Ohio State University College of Medicine during 2009-2010. Lecture-capture technology was used to record all lectures. Attendance at lectures was optional; however, all students were required to complete lecturer evaluation forms. Students rated overall instruction using a five-option response scale. They also reported their attendance. The authors used analysis of variance to compare the lecturer ratings of attendees versus nonattendees. The authors included additional independent variables-year of student, student grade/rank in class, and lecturer degree-in the analysis. The authors analyzed 12,092 evaluations of 220 lecturers received from 358 students. The average number of evaluations per lecturer was 55. Seventy-four percent (n = 8,968 evaluations) of students attended the lectures they evaluated, whereas 26% (n = 3,124 evaluations) viewed them online. Mean lecturer ratings from attendees was 3.85 compared with 3.80 by nonattendees (P ≤ .05; effect size: 0.055). Student's class grade and year, plus lecturer degree, also affected students' evaluations of lecturers (effect sizes: 0.055-0.3). Students' attendance at lectures, year, and class grade, as well as lecturer degree, affect students' evaluation of lecturers. This finding has ramifications on how student evaluations should be collected, interpreted, and used in promotion and tenure decisions in this evolving medical education environment.

Estimating sensitivity and specificity for technology assessment based on observer studies.

PubMed

Nishikawa, Robert M; Pesce, Lorenzo L

2013-07-01

The goal of this study was to determine the accuracy and precision of using scores from a receiver operating characteristic rating scale to estimate sensitivity and specificity. We used data collected in a previous study that measured the improvements in radiologists' ability to classify mammographic microcalcification clusters as benign or malignant with and without the use of a computer-aided diagnosis scheme. Sensitivity and specificity were estimated from the rating data from a question that directly asked the radiologists their biopsy recommendations, which was used as the "truth," because it is the actual recall decision, thus it is their subjective truth. By thresholding the rating data, sensitivity and specificity were estimated for different threshold values. Because of interreader and intrareader variability, estimated sensitivity and specificity values for individual readers could be as much as 100% in error when using rating data compared to using the biopsy recommendation data. When pooled together, the estimates using thresholding the rating data were in good agreement with sensitivity and specificity estimated from the recommendation data. However, the statistical power of the rating data estimates was lower. By simply asking the observer his or her explicit recommendation (eg, biopsy or no biopsy), sensitivity and specificity can be measured directly, giving a more accurate description of empirical variability and the power of the study can be maximized. Copyright © 2013 AUR. Published by Elsevier Inc. All rights reserved.

Predicted stand volume for Eucalyptus plantations by spatial analysis

NASA Astrophysics Data System (ADS)

Latifah, Siti; Teodoro, RV; Myrna, GC; Nathaniel, CB; Leonardo, M. F.

2018-03-01

The main objective of the present study was to assess nonlinear models generated by integrating the stand volume growth rate to estimate the growth and yield of Eucalyptus. The primary data was done for point of interest (POI) of permanent sample plots (PSPs) and inventory sample plots, in Aek Nauli sector, Simalungun regency,North Sumatera Province,Indonesia. from December 2008- March 2009. Today,the demand for forestry information has continued to grow over recent years. Because many forest managers and decision makers face complex decisions, reliable information has become the necessity. In the assessment of natural resources including plantation forests have been widely used geospatial technology.The yield of Eucalyptus plantations represented by merchantable volume as dependent variable while factors affecting yield namely stands variables and the geographic variables as independent variables. The majority of the areas in the study site has stand volume class 0 - 50 m3/ha with 16.59 ha or 65.85 % of the total study site.

Use of SERTS (Socio-Economic, health Resources and Technologic Supplies) models to estimate cancer survival at provincial geographical level.

PubMed

Vercelli, Marina; Lillini, Roberto; Capocaccia, Riccardo; Quaglia, Alberto

2012-12-01

The main aim of this work is to compute expected cancer survival for Italian provinces by Socio-Economic and health Resources and Technologic Supplies (SERTS) models, based on demographic, socioeconomic variables and information describing the health care system (SEH). Five-year age-standardised relative survival rates by gender for 11 cancer sites and all cancers combined of patients diagnosed in 1995-1999, were obtained from the Italian Association of Cancer Registries (CRs) database. The SEH variables describe at provincial level macro-economy, demography, labour market, health resources in 1995-2005. A principal components factor analysis was applied to the SEH variables to control their strong mutual correlation. For every considered cancer site, linear regression models were estimated considering the 5-RS% as dependent variable and the principal components factors of the SEH variables as independent variables. The model composition was correlated to the characteristics of take in charge of patients. SEH factors were correlated with the observed survival for all cancer combined and colon-rectum in both sexes, prostate, kidney and non Hodgkin's lymphomas in men, breast, corpus uteri and melanoma in women (R(2) from 40% to 85%). In the provinces without any CR the survival was very similar with that of neighbouring provinces with analogous social, economic and health characteristics. The SERTS models allowed us to interpret the survival outcome of oncologic patients with respect to the role of the socio-economic and health related system characteristics, stressing how the peculiarities of the take in charge at the province level could address the decisions regarding the allocation of resources. Copyright © 2012 Elsevier Ltd. All rights reserved.

Bilingualism: A Pearl to Overcome Certain Perils of Cochlear Implants

PubMed Central

Humphries, Tom; Kushalnagar, Poorna; Mathur, Gaurav; Napoli, Donna Jo; Padden, Carol; Rathmann, Christian; Smith, Scott

2014-01-01

Cochlear implants (CI) have demonstrated success in improving young deaf children’s speech and low-level speech awareness across a range of auditory functions, but this success is highly variable, and how this success correlates to high-level language development is even more variable. Prevalence on the success rate of CI as an outcome for language development is difficult to obtain because studies vary widely in methodology and variables of interest, and because not all cochlear implant technology (which continues to evolve) is the same. Still, even if the notion of treatment failure is limited narrowly to those who gain no auditory benefit from CI in that they cannot discriminate among ambient noises, the reported treatment failure rate is high enough to call into question the current lack of consideration of alternative approaches to ensure young deaf children’s language development. Recent research has highlighted the risks of delaying language input during critical periods of brain development with concomitant consequences for cognitive and social skills. As a result, we propose that before, during, and after implantation deaf children learn a sign language along with a spoken language to ensure their maximal language development and optimal long-term developmental outcomes. PMID:25419095

Introduction of a theoretical splashing degree to assess the performance of low-viscosity oils in filling of capsules.

PubMed

Niederquell, Andreas; Kuentz, Martin

2011-03-01

These days an alternative to soft capsules is liquid-filled hard capsules. Their filling technology was investigated earlier with highly viscous formulations, while hardly any academic research focused on low-viscosity systems. Accordingly, this work addressed the filling of such oils that are splashing during the dosing process. It was aimed to first study capsule filling, using middle-chain triglycerides as reference oil, in order to then evaluate the concept of a new theoretical splashing degree for different oils. A laboratory-scale filling machine was used that included capsule sealing. Thus, the liquid encapsulation by microspray technology was employed to seal the dosage form. As a result of the study with reference oil, the filling volume and the temperature were found to be significant for the rate of leaking capsules. The filling volume was also important for weight variability of the capsules. However, most critical for this variability was the diameter of the filling nozzle. We proposed a power law for the coefficient of weight variability as a function of the nozzle diameter and the obtained exponent agreed with the proposed theory. Subsequently, a comparison of different oils revealed that the relative splashing degree shared a correlation with the coefficient of the capsule weight variability (Pearson product moment correlation of r=0.990). The novel theoretical concept was therefore found to be predictive for weight variability of the filled capsules. Finally, guidance was provided for the process development of liquid-filled capsules using low-viscosity oils. © 2011 American Association of Pharmaceutical Scientists

Heart Rate Variability in Male Sexual Arousal and Erectile Dysfunction

DTIC Science & Technology

2007-01-22

systems respond during sexual arousal and activity. Throughout the 1980’ s and 1990’ s scientists used and expanded these technologies to understand how...significant depressive symptoms. 26 Beck Anxiety Inventory The Beck Anxiety Inventory (BAI) is a 21-item self-report instrument that was used to assess...state anxiety after the film, was used as a measure of filmed induced state anxiety . Because the distributions of SAQ#2 for both groups were non

DOE Office of Scientific and Technical Information (OSTI.GOV)

Makarov, Yuri V.; Du, Pengwei; Etingov, Pavel V.

The document titled “WECC Variable Generation Planning Reference Book”. This book is divided into two volumes; one is the main document (volume 1)and the other is appendices (volume 2). The main document is a collection of the best practices and the information regarding the application and impact of variables generation on power system planning. This volume (appendices) has additional information on the following topics: Probabilistic load flow problems. 2. Additional useful indices. 3. high-impact low-frequency (HILF) events. 4. Examples of wide-area nomograms. 5. Transmission line ratings, types of dynamic rating methods. 6. Relative costs per MW-km of different electric powermore » transmission technologies. 7. Ultra-high voltage (UHV) transmission. 8.High voltage direct current (VSC-HVDC). 9. HVDC. 10. Rewiring of existing transmission lines. 11. High-temperature low sag (HTLS) conductors. 12. The direct method and energy functions for transient stability analysis in power systems. 13.Blackouts caused by voltage instability. 14. Algorithm for parameter continuation predictor-corrector methods. 15. Approximation techniques available for security regions. 16. Impacts of wind power on power system small signals stability. 17. FIDVR. 18. FACTS. 19. European planning standard and practices. 20. International experience in wind and solar energy sources. 21. Western Renewable Energy Zones (WREZ). 22. various energy storage technologies. 23. demand response. 24. BA consolidation and cooperation options. 25. generator power management requirements and 26. European planning guidelines.« less

Development of process data capturing, analysis and controlling for thermal spray techniques - SprayTracker

NASA Astrophysics Data System (ADS)

Kelber, C.; Marke, S.; Trommler, U.; Rupprecht, C.; Weis, S.

2017-03-01

Thermal spraying processes are becoming increasingly important in high-technology areas, such as automotive engineering and medical technology. The method offers the advantage of a local layer application with different materials and high deposition rates. Challenges in the application of thermal spraying result from the complex interaction of different influencing variables, which can be attributed to the properties of different materials, operating equipment supply, electrical parameters, flow mechanics, plasma physics and automation. In addition, spraying systems are subject to constant wear. Due to the process specification and the high demands on the produced coatings, innovative quality assurance tools are necessary. A central aspect, which has not yet been considered, is the data management in relation to the present measured variables, in particular the spraying system, the handling system, working safety devices and additional measuring sensors. Both the recording of all process-characterizing variables, their linking and evaluation as well as the use of the data for the active process control presuppose a novel, innovative control system (hardware and software) that was to be developed within the scope of the research project. In addition, new measurement methods and sensors are to be developed and qualified in order to improve the process reliability of thermal spraying.

Land change variability and human-environment dynamics in the United States Great Plains

USGS Publications Warehouse

Drummond, M.A.; Auch, Roger F.; Karstensen, K.A.; Sayler, K. L.; Taylor, Janis L.; Loveland, Thomas R.

2012-01-01

Land use and land cover changes have complex linkages to climate variability and change, biophysical resources, and socioeconomic driving forces. To assess these land change dynamics and their causes in the Great Plains, we compare and contrast contemporary changes across 16 ecoregions using Landsat satellite data and statistical analysis. Large-area change analysis of agricultural regions is often hampered by change detection error and the tendency for land conversions to occur at the local-scale. To facilitate a regional-scale analysis, a statistical sampling design of randomly selected 10 km × 10 km blocks is used to efficiently identify the types and rates of land conversions for four time intervals between 1973 and 2000, stratified by relatively homogenous ecoregions. Nearly 8% of the overall Great Plains region underwent land-use and land-cover change during the study period, with a substantial amount of ecoregion variability that ranged from less than 2% to greater than 13%. Agricultural land cover declined by more than 2% overall, with variability contingent on the differential characteristics of regional human–environment systems. A large part of the Great Plains is in relatively stable land cover. However, other land systems with significant biophysical and climate limitations for agriculture have high rates of land change when pushed by economic, policy, technology, or climate forcing factors. The results indicate the regionally based potential for land cover to persist or fluctuate as land uses are adapted to spatially and temporally variable forcing factors.

Space Transportation Operations: Assessment of Methodologies and Models

NASA Technical Reports Server (NTRS)

Joglekar, Prafulla

2001-01-01

The systems design process for future space transportation involves understanding multiple variables and their effect on lifecycle metrics. Variables such as technology readiness or potential environmental impact are qualitative, while variables such as reliability, operations costs or flight rates are quantitative. In deciding what new design concepts to fund, NASA needs a methodology that would assess the sum total of all relevant qualitative and quantitative lifecycle metrics resulting from each proposed concept. The objective of this research was to review the state of operations assessment methodologies and models used to evaluate proposed space transportation systems and to develop recommendations for improving them. It was found that, compared to the models available from other sources, the operations assessment methodology recently developed at Kennedy Space Center has the potential to produce a decision support tool that will serve as the industry standard. Towards that goal, a number of areas of improvement in the Kennedy Space Center's methodology are identified.

Space Transportation Operations: Assessment of Methodologies and Models

NASA Technical Reports Server (NTRS)

Joglekar, Prafulla

2002-01-01

The systems design process for future space transportation involves understanding multiple variables and their effect on lifecycle metrics. Variables such as technology readiness or potential environmental impact are qualitative, while variables such as reliability, operations costs or flight rates are quantitative. In deciding what new design concepts to fund, NASA needs a methodology that would assess the sum total of all relevant qualitative and quantitative lifecycle metrics resulting from each proposed concept. The objective of this research was to review the state of operations assessment methodologies and models used to evaluate proposed space transportation systems and to develop recommendations for improving them. It was found that, compared to the models available from other sources, the operations assessment methodology recently developed at Kennedy Space Center has the potential to produce a decision support tool that will serve as the industry standard. Towards that goal, a number of areas of improvement in the Kennedy Space Center's methodology are identified.

[Economic determinants of the demand for importation of pharmacochemical and pharmaceutical products].

PubMed

Santos, Anderson Moreira Aristides Dos; Tejada, César Augusto Oviedo; Jacinto, Paulo de Andrade

2017-09-28

: This article analyzes the relationship between the demand for importation of pharmacochemical and pharmaceutical products and economic variables (exchange rate, import prices, and aggregate income) in Brazil, using monthly data from 1997-2014. The main results showed that increases in aggregate income and price reductions in imports have a positive and significant impact (elastic and inelastic, respectively) on imports. Exchange rate was only significant in the more aggregate model. Thus, aggregate income was a robust variable with strong impact on the importation of pharmacochemical and pharmaceutical products. The arguments in the literature that this industry's international trade deficit is related to a deficit in knowledge and technology and the current study's results provide evidence that as economic activity grows, there is a greater demand for this type of product. Additionally, if domestic production is insufficient, there is a need for imports, which can generate pressure on the trade deficit in the industry and contribute to Brazil's dependence on other countries.

A conceptual framework of outcomes for caregivers of assistive technology users.

PubMed

Demers, Louise; Fuhrer, Marcus J; Jutai, Jeffrey; Lenker, James; Depa, Malgorzata; De Ruyter, Frank

2009-08-01

To develop and validate the content of a conceptual framework concerning outcomes for caregivers whose recipients are assistive technology users. The study was designed in four stages. First, a list of potential key variables relevant to the caregivers of assistive technology users was generated from a review of the existing literature and semistructured interviews with caregivers. Second, the variables were analyzed, regrouped, and partitioned, using a conceptual mapping approach. Third, the key areas were anchored in a general stress model of caregiving. Finally, the judgments of rehabilitation experts were used to evaluate the conceptual framework. An important result of this study is the identification of a complex set of variables that need to be considered when examining the experience of caregivers of assistive technology users. Stressors, such as types of assistance, number of tasks, and physical effort, are predominant contributors to caregiver outcomes along with caregivers' personal resources acting as mediating factors (intervening variables) and assistive technology acting as a key moderating factor (effect modifier variable). Recipients' use of assistive technology can enhance caregivers' well being because of its potential for alleviating a number of stressors associated with caregiving. Viewed as a whole, this work demonstrates that the assistive technology experience of caregivers has many facets that merit the attention of outcomes researchers.

The effect of information technology on hospital performance.

PubMed

Williams, Cynthia; Asi, Yara; Raffenaud, Amanda; Bagwell, Matt; Zeini, Ibrahim

2016-12-01

While healthcare entities have integrated various forms of health information technology (HIT) into their systems due to claims of increased quality and decreased costs, as well as various incentives, there is little available information about which applications of HIT are actually the most beneficial and efficient. In this study, we aim to assist administrators in understanding the characteristics of top performing hospitals. We utilized data from the Health Information and Management Systems Society and the Center for Medicare and Medicaid to assess 1039 hospitals. Inputs considered were full time equivalents, hospital size, and technology inputs. Technology inputs included personal health records (PHR), electronic medical records (EMRs), computerized physician order entry systems (CPOEs), and electronic access to diagnostic results. Output variables were measures of quality, hospital readmission and mortality rate. The analysis was conducted in a two-stage methodology: Data Envelopment Analysis (DEA) and Automatic Interaction Detector Analysis (AID), decision tree regression (DTreg). Overall, we found that electronic access to diagnostic results systems was the most influential technological characteristics; however organizational characteristics were more important than technological inputs. Hospitals that had the highest levels of quality indicated no excess in the use of technology input, averaging one use of a technology component. This study indicates that prudent consideration of organizational characteristics and technology is needed before investing in innovative programs.

Transforming the U.S. Market with a New Application of Ternary-Type Pumped-Storage Hydropower Technology: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Corbus, David A; Jacobson, Mark D; Tan, Jin

As the deployment of wind and solar technologies increases at an unprecedented rate across the United States and in many world markets, the variability of power output from these technologies expands the need for increased power system flexibility. Energy storage can play an important role in the transition to a more flexible power system that can accommodate high penetrations of variable renewable technologies. This project focuses on how ternary pumped storage hydropower (T-PSH) coupled with dynamic transmission can help this transition by defining the system-wide benefits of deploying this technology in specific U.S. markets. T-PSH technology is the fastest respondingmore » pumped hydro technology equipment available today for grid services. T-PSH efficiencies are competitive with lithium-ion (Li-ion) batteries, and T-PSH can provide increased storage capacity with minimal degradation during a 50-year lifetime. This project evaluates T-PSH for grid services ranging from fast frequency response (FFR) for power system contingency events and enhanced power system stability to longer time periods for power system flexibility to accommodate ramping from wind and solar variability and energy arbitrage. In summary, this project: Compares power grid services and costs, including ancillary services and essential reliability services, for T-PSH and conventional pumped storage hydropower (PSH) - Evaluates the dynamic response of T-PSH and PSH technologies and their contribution to essential reliability services for grid stability by developing new power system model representations for T-PSH and performing simulations in the Western Interconnection - Evaluates production costs, operational impacts, and energy storage revenue streams for future power system scenarios with T-PSH focusing on time frames of 5 minutes and more - Assesses the electricity market-transforming capabilities of T-PSH technology coupled with transmission monitoring and dynamic control. This paper presents an overview of the methodology and initial, first-year preliminary findings of a 2-year in-depth study into how advanced PSH and dynamic transmission contribute to the transformation and modernization of the U.S. electric grid. This project is part of the HydroNEXT Initiative funded by the U.S. Department of Energy (DOE) that is focused on the development of innovative technologies to advance nonpowered dams and PSH. The project team consists of the National Renewable Energy Laboratory (project lead), Absaroka Energy, LLC (Montana-based PSH project developer), GE Renewable Energy (PSH pump/turbine equipment supplier), Grid Dynamics, and Auburn University (lead for NREL/Auburn dynamic modeling team).« less

Case factors affecting hearing aid recommendations by hearing care professionals.

PubMed

Gioia, Carmine; Ben-Akiva, Moshe; Kirkegaard, Matilde; Jørgensen, Ole; Jensen, Kasper; Schum, Don

2015-03-01

Professional recommendations to patients concerning hearing instrument (HI) technology levels are not currently evidence-based. Pre-fitting parameters have not been proven to be the primary indicators for optimal patient outcome with different HI technology levels. This results in subjective decision-making as regards the technology level recommendation made by professionals. The objective of this study is to gain insight into the decision-making criteria utilized by professionals when recommending HI technology levels to hearing-impaired patients. A set of patient variables (and their respective levels) was identified by professionals as determinant for their recommendation of HIs. An experimental design was developed and 21 representative patient cases were generated. The design was based on a contrastive vignette technique according to which different types of vignettes (patient cases) were randomly presented to respondents in an online survey. Based on these patient cases, professionals were asked in the survey to make a treatment recommendation. The online survey was sent to approximately 3,500 professionals from the US, Germany, France, and Italy. The professionals were randomly selected from the databases of Oticon sales companies. The manufacturer sponsoring the survey remained anonymous and was only revealed after completing the survey, if requested by the respondent. The response rate was 20.5%. Data comprised of respondent descriptions and patient case recommendations that were collected from the online survey. A binary logit modeling approach was used to identify the variables that discriminate between the respondents' recommendations of HI technology levels. The results show that HI technology levels are recommended by professionals based on their perception of the patient's activity level in life, the level of HI usage for experienced users, their age, and their speech discrimination score. Surprisingly, the patient's lifestyle as perceived by the hearing care professional, followed by speech discrimination, were the strongest factors in explaining treatment recommendation. An active patient with poor speech discrimination had a 17% chance of being recommended the highest technology level HI. For a very active patient with good speech discrimination, the probability increases to 68%. The discrepancies in HI technology level recommendations are not justified by academic research or evidence of optimal patient outcome with a different HI technology level. The paradigm of lifestyle as the significant variable identified in this study is apparently deeply anchored in the mindset of the professional despite the lack of supporting evidence. These results call for a shift in the professional's technology level recommendation practice, from nonevidence-based to a proven practice that can maximize patient outcome. American Academy of Audiology.

Influence of ECG sampling rate in fetal heart rate variability analysis.

PubMed

De Jonckheere, J; Garabedian, C; Charlier, P; Champion, C; Servan-Schreiber, E; Storme, L; Debarge, V; Jeanne, M; Logier, R

2017-07-01

Fetal hypoxia results in a fetal blood acidosis (pH<;7.10). In such a situation, the fetus develops several adaptation mechanisms regulated by the autonomic nervous system. Many studies demonstrated significant changes in heart rate variability in hypoxic fetuses. So, fetal heart rate variability analysis could be of precious help for fetal hypoxia prediction. Commonly used fetal heart rate variability analysis methods have been shown to be sensitive to the ECG signal sampling rate. Indeed, a low sampling rate could induce variability in the heart beat detection which will alter the heart rate variability estimation. In this paper, we introduce an original fetal heart rate variability analysis method. We hypothesize that this method will be less sensitive to ECG sampling frequency changes than common heart rate variability analysis methods. We then compared the results of this new heart rate variability analysis method with two different sampling frequencies (250-1000 Hz).

Hyperparameter Classification of Arctic Sea Ice and Snow Based on Aerial Laser Data, Passive Microwave Data and Field Data

NASA Astrophysics Data System (ADS)

Herzfeld, U. C.; Maslanik, J.; Williams, S.; Sturm, M.; Cavalieri, D.

2006-12-01

In the past year, the Arctic sea-ice cover has been shrinking at an alarming rate. Remote-sensing technologies provide opportunities for observations of the sea ice at unprecedented repetition rates and spatial resolutions. The advance of new observational technologies is not only fascinating, it also brings with it the challenge and necessity to derive adequate new geoinformatical and geomathematical methods as a basis for analysis and geophysical interpretation of new data types. Our research includes validation and analysis of NASA EOS data, development of observational instrumentation and advanced geoinformatics. In this talk we emphasize the close linkage between technological development and geoinformatics along case studies of sea-ice near Point Barrow, Alaska, based on the following data types: AMSR-E and PSR passive microwave data, RADARSAT and ERS SAR data, manually-collected snow-depth data and laser-elevation data from unmanned aerial vehicles. The hyperparameter concept is introduced to facilitate characterization and classification of the same sea-ice properties and spatial structures from these data sets, which differ with respect to spatial resolution, measured parameters and observed geophysical variables. Mathematically, this requires parameter identification in undersampled, oversampled or overprinted situations.

Enhanced oral bioavailability of silymarin using liposomes containing a bile salt: preparation by supercritical fluid technology and evaluation in vitro and in vivo

PubMed Central

Yang, Gang; Zhao, Yaping; Zhang, Yongtai; Dang, Beilei; Liu, Ying; Feng, Nianping

2015-01-01

The aim of this investigation was to develop a procedure to improve the dissolution and bioavailability of silymarin (SM) by using bile salt-containing liposomes that were prepared by supercritical fluid technology (ie, solution-enhanced dispersion by supercritical fluids [SEDS]). The process for the preparation of SM-loaded liposomes containing a bile salt (SM-Lip-SEDS) was optimized using a central composite design of response surface methodology with the ratio of SM to phospholipids (w/w), flow rate of solution (mL/min), and pressure (MPa) as independent variables. Particle size, entrapment efficiency (EE), and drug loading (DL) were dependent variables for optimization of the process and formulation variables. The particle size, zeta potential, EE, and DL of the optimized SM-Lip-SEDS were 160.5 nm, −62.3 mV, 91.4%, and 4.73%, respectively. Two other methods to produce SM liposomes were compared to the SEDS method. The liposomes obtained by the SEDS method exhibited the highest EE and DL, smallest particle size, and best stability compared to liposomes produced by the thin-film dispersion and reversed-phase evaporation methods. Compared to the SM powder, SM-Lip-SEDS showed increased in vitro drug release. The in vivo AUC0−t of SM-Lip-SEDS was 4.8-fold higher than that of the SM powder. These results illustrate that liposomes containing a bile salt can be used to enhance the oral bioavailability of SM and that supercritical fluid technology is suitable for the preparation of liposomes. PMID:26543366

Assistive technology evaluations: Remote-microphone technology for children with Autism Spectrum Disorder.

PubMed

Schafer, Erin C; Wright, Suzanne; Anderson, Christine; Jones, Jessalyn; Pitts, Katie; Bryant, Danielle; Watson, Melissa; Box, Jerrica; Neve, Melissa; Mathews, Lauren; Reed, Mary Pat

The goal of this study was to conduct assistive technology evaluations on 12 children diagnosed with Autism Spectrum Disorder (ASD) to evaluate the potential benefits of remote-microphone (RM) technology. A single group, within-subjects design was utilized to explore individual and group data from functional questionnaires and behavioral test measures administered, designed to assess school- and home-based listening abilities, once with and once without RM technology. Because some of the children were unable to complete the behavioral test measures, particular focus was given to the functional questionnaires completed by primary teachers, participants, and parents. Behavioral test measures with and without the RM technology included speech recognition in noise, auditory comprehension, and acceptable noise levels. The individual and group teacher (n=8-9), parent (n=8-9), and participant (n=9) questionnaire ratings revealed substantially less listening difficulty when RM technology was used compared to the no-device ratings. On the behavioral measures, individual data revealed varied findings, which will be discussed in detail in the results section. However, on average, the use of the RM technology resulted in improvements in speech recognition in noise (4.6dB improvement) in eight children, higher auditory working memory and comprehension scores (12-13 point improvement) in seven children, and acceptance of poorer signal-to-noise ratios (8.6dB improvement) in five children. The individual and group data from this study suggest that RM technology may improve auditory function in children with ASD in the classroom, at home, and in social situations. However, variability in the data and the inability of some children to complete the behavioral measures indicates that individualized assistive technology evaluations including functional questionnaires will be necessary to determine if the RM technology will be of benefit to a particular child who has ASD. Copyright © 2016 Elsevier Inc. All rights reserved.

Factors affecting sustainable adoption of e-health technology in developing countries: an exploratory survey of Nigerian hospitals from the perspective of healthcare professionals

PubMed Central

Toycan, Mehmet

2018-01-01

Background E-health technology applications are essential tools of modern information technology that improve quality of healthcare delivery in hospitals of both developed and developing countries. However, despite its positive benefits, studies indicate that the rate of the e-health adoption in some developing countries is either low or underutilized. This is due in part, to barriers such as resistance from healthcare professionals, poor infrastructure, and low technical expertise among others. Objective The aim of this study is to investigate, identify and analyze the underlying factors that affect healthcare professionals decision to adopt and use e-health technology applications in developing countries, with particular reference to hospitals in Nigeria. Methods The study used a cross sectional approach in the form of a close-ended questionnaire to collect quantitative data from a sample of 465 healthcare professionals randomly selected from 15 hospitals in Nigeria. We used the modified Technology Acceptance Model (TAM) as the dependent variable and external factors as independent variables. The collected data was then analyzed using SPSS statistical analysis such as frequency test, reliability analysis, and correlation coefficient analysis. Results The results obtained, which correspond with findings from other researches published, indicate that perceived usefulness, belief, willingness, as well as attitude of healthcare professionals have significant influence on their intention to adopt and use the e-health technology applications. Other strategic factors identified include low literacy level and experience in using the e-health technology applications, lack of motivation, poor organizational and management policies. Conclusion The study contributes to the literature by pinpointing significant areas where findings can positively affect, or be found useful by, healthcare policy decision makers in Nigeria and other developing countries. This can help them understand their areas of priorities and weaknesses when planning for e-health technology adoption and implementation. PMID:29507830

Factors affecting sustainable adoption of e-health technology in developing countries: an exploratory survey of Nigerian hospitals from the perspective of healthcare professionals.

PubMed

Zayyad, Musa Ahmed; Toycan, Mehmet

2018-01-01

E-health technology applications are essential tools of modern information technology that improve quality of healthcare delivery in hospitals of both developed and developing countries. However, despite its positive benefits, studies indicate that the rate of the e-health adoption in some developing countries is either low or underutilized. This is due in part, to barriers such as resistance from healthcare professionals, poor infrastructure, and low technical expertise among others. The aim of this study is to investigate, identify and analyze the underlying factors that affect healthcare professionals decision to adopt and use e-health technology applications in developing countries, with particular reference to hospitals in Nigeria. The study used a cross sectional approach in the form of a close-ended questionnaire to collect quantitative data from a sample of 465 healthcare professionals randomly selected from 15 hospitals in Nigeria. We used the modified Technology Acceptance Model (TAM) as the dependent variable and external factors as independent variables. The collected data was then analyzed using SPSS statistical analysis such as frequency test, reliability analysis, and correlation coefficient analysis. The results obtained, which correspond with findings from other researches published, indicate that perceived usefulness, belief, willingness, as well as attitude of healthcare professionals have significant influence on their intention to adopt and use the e-health technology applications. Other strategic factors identified include low literacy level and experience in using the e-health technology applications, lack of motivation, poor organizational and management policies. The study contributes to the literature by pinpointing significant areas where findings can positively affect, or be found useful by, healthcare policy decision makers in Nigeria and other developing countries. This can help them understand their areas of priorities and weaknesses when planning for e-health technology adoption and implementation.

Entropy change of biological dynamics in COPD

PubMed Central

Cao, Zhixin; Sun, Baoqing; Lo, Iek Long; Liu, Tzu-Ming; Zheng, Jun; Sun, Shixue; Shi, Yan; Zhang, Xiaohua Douglas

2017-01-01

In this century, the rapid development of large data storage technologies, mobile network technology, and portable medical devices makes it possible to measure, record, store, and track analysis of large amount of data in human physiological signals. Entropy is a key metric for quantifying the irregularity contained in physiological signals. In this review, we focus on how entropy changes in various physiological signals in COPD. Our review concludes that the entropy change relies on the types of physiological signals under investigation. For major physiological signals related to respiratory diseases, such as airflow, heart rate variability, and gait variability, the entropy of a patient with COPD is lower than that of a healthy person. However, in case of hormone secretion and respiratory sound, the entropy of a patient is higher than that of a healthy person. For mechanomyogram signal, the entropy increases with the increased severity of COPD. This result should give valuable guidance for the use of entropy for physiological signals measured by wearable medical device as well as for further research on entropy in COPD. PMID:29066881

A mind in a disk: the attribution of mental states to technological systems.

PubMed

Parlangeli, Oronzo; Chiantini, Tommaso; Guidi, Stefano

2012-01-01

This paper reports a study about the role of different variables in the process of attributing mental states to technological systems, variables such as the number of figural elements displayed in the system and the personality traits of the subjects interacting with the systems. In an experiment, participants were interacting with a computer on whose screen several disks of various sizes and colours were blinking at different rates. Each time a disk reappeared on the screen its position was randomly varied. As in a videogame, participants had to click on the disks to increase their score. The results showed that, even in the case of such a simple system, subjects believed that the figural elements they were interacting with had some form of mental states, although their confidence in these beliefs varied in the different experimental conditions. The confidence level of the attributions, in fact, was not the same for all the different mental states considered, and it varied also both with the number of elements being displayed as well as with some personality traits of the subjects.

A Study of Persistence in the Northeast State Community College Health-Related Programs of Study

NASA Astrophysics Data System (ADS)

Hamilton, Allana R.

2011-12-01

The purpose of the study was to identify factors that were positively associated with persistence to graduation by students who were admitted to Health-Related Programs leading to the degree associate of applied science at Northeast State Community College. The criterion variable in this study was persistence, which was categorized into two groups the persister group (program completers) and the nonpersister (program noncompleters) group. The predictor variables included gender, ethnic origin, first- (or nonfirst-) generation-student status, age, specific major program of study, number of remedial and/or developmental courses taken, grades in selected courses (human anatomy and physiology I and II, microbiology, probability and statistics, composition I, clinical I, clinical II), and number of mathematics and science credit hours earned prior to program admission. The data for this ex post facto nonexperimental design were located in Northeast State's student records database, Banner Information System. The subjects of the study were students who had been admitted into Health-Related Programs of study at a 2-year public community college between the years of 1999 and 2008. The population size was 761. Health-Related Programs of study included Dental Assisting, Cardiovascular Technology, Emergency Medical Technology -- Paramedic, Medical Laboratory Technology, Nursing, and Surgical Technology. A combination of descriptive and inferential statistics was used in the analysis of the data. Descriptive statistics included measures of central tendency, standard deviations, and percentages, as appropriate. Independent samples t-tests were used to determine if the mean of a variable on one group of subjects was different from the mean of the same variable with a different group of subjects. It was found that gender, ethnic origin, first-generation status, and age were not significantly associated with persistence to graduation. However, findings did reveal a statistically significant difference in persistence rates among the specific Health-Related Programs of study. Academic data including grades in human anatomy and physiology I, probability and statistics, and composition I, suggested a relationship between the course grade and persistence to graduation. Findings also revealed a relationship between the number of math and science courses completed and students' persistence to graduation.

Rotary engine performance limits predicted by a zero-dimensional model

NASA Technical Reports Server (NTRS)

Bartrand, Timothy A.; Willis, Edward A.

1992-01-01

A parametric study was performed to determine the performance limits of a rotary combustion engine. This study shows how well increasing the combustion rate, insulating, and turbocharging increase brake power and decrease fuel consumption. Several generalizations can be made from the findings. First, it was shown that the fastest combustion rate is not necessarily the best combustion rate. Second, several engine insulation schemes were employed for a turbocharged engine. Performance improved only for a highly insulated engine. Finally, the variability of turbocompounding and the influence of exhaust port shape were calculated. Rotary engines performance was predicted by an improved zero-dimensional computer model based on a model developed at the Massachusetts Institute of Technology in the 1980's. Independent variables in the study include turbocharging, manifold pressures, wall thermal properties, leakage area, and exhaust port geometry. Additions to the computer programs since its results were last published include turbocharging, manifold modeling, and improved friction power loss calculation. The baseline engine for this study is a single rotor 650 cc direct-injection stratified-charge engine with aluminum housings and a stainless steel rotor. Engine maps are provided for the baseline and turbocharged versions of the engine.

Automatic classifier based on heart rate variability to identify fallers among hypertensive subjects.

PubMed

Melillo, Paolo; Jovic, Alan; De Luca, Nicola; Pecchia, Leandro

2015-08-01

Accidental falls are a major problem of later life. Different technologies to predict falls have been investigated, but with limited success, mainly because of low specificity due to a high false positive rate. This Letter presents an automatic classifier based on heart rate variability (HRV) analysis with the goal to identify fallers automatically. HRV was used in this study as it is considered a good estimator of autonomic nervous system (ANS) states, which are responsible, among other things, for human balance control. Nominal 24 h electrocardiogram recordings from 168 cardiac patients (age 72 ± 8 years, 60 female), of which 47 were fallers, were investigated. Linear and nonlinear HRV properties were analysed in 30 min excerpts. Different data mining approaches were adopted and their performances were compared with a subject-based receiver operating characteristic analysis. The best performance was achieved by a hybrid algorithm, RUSBoost, integrated with feature selection method based on principal component analysis, which achieved satisfactory specificity and accuracy (80 and 72%, respectively), but low sensitivity (51%). These results suggested that ANS states causing falls could be reliably detected, but also that not all the falls were due to ANS states.

[Voluntary alpha-power increasing training impact on the heart rate variability].

PubMed

Bazanova, O M; Balioz, N V; Muravleva, K B; Skoraia, M V

2013-01-01

In order to study the effect of the alpha EEG power increasing training at heart rate variability (HRV) as the index of the autonomic regulation of cognitive functions there were follow tasks: (1) to figure out the impact of biofeedback in the voluntary increasing the power in the individual high-frequency alpha-band effect on heart rate variability and related characteristics of cognitive and emotional spheres, (2) to determine the nature of the relationship between alpha activity indices and heart rate variability, depending on the alpha-frequency EEG pattern at rest (3) to examine how the individual alpha frequency EEG pattern is reflected in changes HRV as a result of biofeedback training. Psychometric indicators of cognitive performance, the characteristics of the alpha-EEG activity and heart rate variability (HRV) as LF/HF and pNN50 were recorded in 27 healthy men aged 18-34 years, before, during, and after 10 sessions of training of voluntary increase in alpha power in the individual high-frequency alpha band with eyes closed. To determine the biofeedback effect on the alpha power increasing training, data subjects are compared in 2 groups: experimental (14) with the real and the control group (13 people)--with mock biofeedback. The follow up effect of trainings was studied through month over the 10 training sessions. Results showed that alpha biofeedback training enhanced the fluency and accuracy in cognitive performance, decreased anxiety and frontal EMG, increased resting frequency, width and power in individual upper alpha range only in participants with low baseline alpha frequency. While mock biofeedback increased resting alpha power only in participants with high baseline resting alpha frequency and did change neither cognitive performance, nor HRV indices. Biofeedback training eliminated the alpha power decrease in response to arithmetic task in both with high and low alpha frequency participants and this effect was followed up over the month. Mock biofeedback training has no such effect. The positive correlation between the alpha-peak frequency and pNN50 in patients with initially low, but negative--those with high baseline alpha frequency explains the multidirectional biofeedback effects on HRV in low and high alpha frequency subjects. The individual alpha-frequency EEG pattern determines the effectiveness of the alpha EEG biofeedback training in changing heart rate variability, which provides a basis for predicting the results and develop individual approaches to the biofeedback technology implementation that can be used in clinical practice for treatment and rehabilitation of psychosomatic syndromes and in educational training.

The role of organizational context and individual nurse characteristics in explaining variation in use of information technologies in evidence based practice

PubMed Central

2012-01-01

Background There is growing awareness of the role of information technology in evidence-based practice. The purpose of this study was to investigate the role of organizational context and nurse characteristics in explaining variation in nurses’ use of personal digital assistants (PDAs) and mobile Tablet PCs for accessing evidence-based information. The Promoting Action on Research Implementation in Health Services (PARIHS) model provided the framework for studying the impact of providing nurses with PDA-supported, evidence-based practice resources, and for studying the organizational, technological, and human resource variables that impact nurses’ use patterns. Methods A survey design was used, involving baseline and follow-up questionnaires. The setting included 24 organizations representing three sectors: hospitals, long-term care (LTC) facilities, and community organizations (home care and public health). The sample consisted of 710 participants (response rate 58%) at Time 1, and 469 for whom both Time 1 and Time 2 follow-up data were obtained (response rate 66%). A hierarchical regression model (HLM) was used to evaluate the effect of predictors from all levels simultaneously. Results The Chi square result indicated PDA users reported using their device more frequently than Tablet PC users (p = 0.001). Frequency of device use was explained by ‘breadth of device functions’ and PDA versus Tablet PC. Frequency of Best Practice Guideline use was explained by ‘willingness to implement research,’ ‘structural and electronic resources,’ ‘organizational slack time,’ ‘breadth of device functions’ (positive effects), and ‘slack staff’ (negative effect). Frequency of Nursing Plus database use was explained by ‘culture,’ ‘structural and electronic resources,’ and ‘breadth of device functions’ (positive effects), and ‘slack staff’ (negative). ‘Organizational culture’ (positive), ‘breadth of device functions’ (positive), and ‘slack staff ‘(negative) were associated with frequency of Lexi/PEPID drug dictionary use. Conclusion Access to PDAs and Tablet PCs supported nurses’ self-reported use of information resources. Several of the organizational context variables and one individual nurse variable explained variation in the frequency of information resource use. PMID:23276201

Sustainability assessment of tertiary wastewater treatment technologies: a multi-criteria analysis.

PubMed

Plakas, K V; Georgiadis, A A; Karabelas, A J

2016-01-01

The multi-criteria analysis gives the opportunity to researchers, designers and decision-makers to examine decision options in a multi-dimensional fashion. On this basis, four tertiary wastewater treatment (WWT) technologies were assessed regarding their sustainability performance in producing recycled wastewater, considering a 'triple bottom line' approach (i.e. economic, environmental, and social). These are powdered activated carbon adsorption coupled with ultrafiltration membrane separation (PAC-UF), reverse osmosis, ozone/ultraviolet-light oxidation and heterogeneous photo-catalysis coupled with low-pressure membrane separation (photocatalytic membrane reactor, PMR). The participatory method called simple multi-attribute rating technique exploiting ranks was employed for assigning weights to selected sustainability indicators. This sustainability assessment approach resulted in the development of a composite index as a final metric, for each WWT technology evaluated. The PAC-UF technology appears to be the most appropriate technology, attaining the highest composite value regarding the sustainability performance. A scenario analysis confirmed the results of the original scenario in five out of seven cases. In parallel, the PMR was highlighted as the technology with the least variability in its performance. Nevertheless, additional actions and approaches are proposed to strengthen the objectivity of the final results.

Development of Micro Air Vehicle Technology With In-Flight Adaptive-Wing Structure

NASA Technical Reports Server (NTRS)

Waszak, Martin R. (Technical Monitor); Shkarayev, Sergey; Null, William; Wagner, Matthew

2004-01-01

This is a final report on the research studies, "Development of Micro Air Vehicle Technology with In-Flight Adaptrive-Wing Structure". This project involved the development of variable-camber technology to achieve efficient design of micro air vehicles. Specifically, it focused on the following topics: 1) Low Reynolds number wind tunnel testing of cambered-plate wings. 2) Theoretical performance analysis of micro air vehicles. 3) Design of a variable-camber MAV actuated by micro servos. 4) Test flights of a variable-camber MAV.

Priority setting for health technology assessments: a systematic review of current practical approaches.

PubMed

Noorani, Hussein Z; Husereau, Donald R; Boudreau, Rhonda; Skidmore, Becky

2007-01-01

This study sought to identify and compare various practical and current approaches of health technology assessment (HTA) priority setting. A literature search was performed across PubMed, MEDLINE, EMBASE, BIOSIS, and Cochrane. Given an earlier review conducted by European agencies (EUR-ASSESS project), the search was limited to literature indexed from 1996 onward. We also searched Web sites of HTA agencies as well as HTAi and ISTAHC conference abstracts. Agency representatives were contacted for information about their priority-setting processes. Reports on practical approaches selected through these sources were identified independently by two reviewers. A total of twelve current priority-setting frameworks from eleven agencies were identified. Ten countries were represented: Canada, Denmark, England, Hungary, Israel, Scotland, Spain, Sweden, The Netherlands, and United States. Fifty-nine unique HTA priority-setting criteria were divided into eleven categories (alternatives; budget impact; clinical impact; controversial nature of proposed technology; disease burden; economic impact; ethical, legal, or psychosocial implications; evidence; interest; timeliness of review; variation in rates of use). Differences across HTA agencies were found regarding procedures for categorizing, scoring, and weighing of policy criteria. Variability exists in the methods for priority setting of health technology assessment across HTA agencies. Quantitative rating methods and consideration of cost benefit for priority setting were seldom used. These study results will assist HTA agencies that are re-visiting or developing their prioritization methods.

In situ lifetimes and kinetics of a reductive whey barrier and an oxidative ORC barrier in the subsurface.

PubMed

Barcelona, M J; Xie, G

2001-08-15

Permeable reactive barriers (PRB) are being used to engineer favorable field conditions for in-situ remediation efforts. Two redox adjustment barriers were installed to facilitate a 10-month research effort on the fate and transport of MTBE (methyl tert-butyl ether) at a site called the Michigan Integrated Remediation Technology Laboratory (MIRTL). Thirty kilograms of whey were injected as a slurry into an unconfined aquifer to establish an upgradient reductive zone to reduce O2 concentration in the vicinity of a contaminant injection source. To minimize the impact of contaminant release, 363 kg of oxygen release compound (ORC) were placed in the aquifer as a downgradient oxidative barrier. Dissolved oxygen and other chemical species were monitored in the field to evaluate the effectiveness of this technology. A transient one-dimensional advective-dispersive-reaction (ADR) model was proposed to simulate the dissolved oxygen transport. The equations were solved with commonly encountered PRB initial and constant/variable boundary conditions. No similar previous solution was found in the literature. The in-situ lifetimes, based on variable source loading, were estimated to be 1,661 and 514 days for the whey barrier and ORC barrier, respectively. Estimates based on either maximum O2 consumption/production or measured O2 curves were found to under- or overestimate the lifetime of the barriers. The pseudo-first-order rate constant of whey depletion was estimated to be 0.303/d with a dissolution rate of 0.04/d. The oxygen release rate constant in the ORC barrier was estimated to be 0.03/d. This paper provides a means to design and predict the performance of reactive redox barriers, especially when only limited field data are available.

Efficiency optimization of a closed indirectly fired gas turbine cycle working under two variable-temperature heat reservoirs

NASA Astrophysics Data System (ADS)

Ma, Zheshu; Wu, Jieer

2011-08-01

Indirectly or externally fired gas turbines (IFGT or EFGT) are interesting technologies under development for small and medium scale combined heat and power (CHP) supplies in combination with micro gas turbine technologies. The emphasis is primarily on the utilization of the waste heat from the turbine in a recuperative process and the possibility of burning biomass even "dirty" fuel by employing a high temperature heat exchanger (HTHE) to avoid the combustion gases passing through the turbine. In this paper, finite time thermodynamics is employed in the performance analysis of a class of irreversible closed IFGT cycles coupled to variable temperature heat reservoirs. Based on the derived analytical formulae for the dimensionless power output and efficiency, the efficiency optimization is performed in two aspects. The first is to search the optimum heat conductance distribution corresponding to the efficiency optimization among the hot- and cold-side of the heat reservoirs and the high temperature heat exchangers for a fixed total heat exchanger inventory. The second is to search the optimum thermal capacitance rate matching corresponding to the maximum efficiency between the working fluid and the high-temperature heat reservoir for a fixed ratio of the thermal capacitance rates of the two heat reservoirs. The influences of some design parameters on the optimum heat conductance distribution, the optimum thermal capacitance rate matching and the maximum power output, which include the inlet temperature ratio of the two heat reservoirs, the efficiencies of the compressor and the gas turbine, and the total pressure recovery coefficient, are provided by numerical examples. The power plant configuration under optimized operation condition leads to a smaller size, including the compressor, turbine, two heat reservoirs and the HTHE.

Relative importance of physical and economic factors in Appalachian coalbed gas assessment

USGS Publications Warehouse

Attanasi, E.D.

1998-01-01

In the 1995 National Assessment of Oil and Gas Resources prepared by the U.S. Geological Survey, only 20% of the assessed technically recoverable Appalachian Province coalbed gas resources were economic. Physical and economic variables are examined to explain the disparity between economic and technically recoverable coalbed gas. The Anticline and Syncline plays of the Northern Appalachian Basin, which account for 77% of the assessed technically recoverable coalbed gas, are not economic. Analysis shows marginal reductions in costs or rate of return will not turn these plays into commercial successes. Physical parameters that determine ultimate well recoverability and the rate of gas recovery are primary reasons the Northern Appalachian Basin plays are non-commercial. If the application of new well stimulation technology could offset slow gas desorption rates, Appalachian Province economic gas could increase to more then 70% of the technically recoverable gas. Similarly, if operators are able to develop strategies to selectively drill plays by avoiding dry holes and non-commercial occurrences, the economic fraction of technically recoverable gas could increase to over half.In the 1995 National Assessment of Oil and Gas Resources prepared by the U.S. Geological Survey, only 20% of the assessed technically recoverable Appalachian Province coalbed gas resources were economic. Physical and economic variables are examined to explain the disparity between economic and technically recoverable coalbed gas. The Anticline and Syncline plays of the Northern Appalachian Basin, which account for 77% of the assessed technically recoverable coalbed gas, are not economic. Analysis shows marginal reductions in costs or rate of return will not turn these plays into commercial successes. Physical parameters that determine ultimate well recoverability and the rate of gas recovery are primary reasons the Northern Appalachian Basin plays are non-commercial. If the application of new well stimulation technology could offset slow gas desorption rates, Appalachian Province economic gas could increase to more then 70% of the technically recoverable gas. Similarly, if operators are able to develop strategies to selectively drill plays by avoiding dry holes and non-commercial occurrences, the economic fraction of technically recoverable gas could increase to over half.

Determinants of Mobile Wireless Technology for Promoting Interactivity in Lecture Sessions: An Empirical Analysis

ERIC Educational Resources Information Center

Gan, Chin Lay; Balakrishnan, Vimala

2014-01-01

The aim of this paper is to identify adoption factors of mobile wireless technology to increase interactivity between lecturers and students during lectures. A theoretical framework to ascertain lecturers' intentions to use mobile wireless technology during lectures (dependent variable) is proposed with seven independent variables. The…

Digital Technology and Caregiver Training for Older Persons: Cognitive and Affective Perspectives

ERIC Educational Resources Information Center

Zheng, Robert; Hicken, Bret L.; Hill, Robert D.; Luptak, Marilyn; Daniel, Candice M.; Grant, Marren; Rupper, Randall

2016-01-01

This research project included two studies that investigated (a) differences between technology use in tech-knowledgeable and less tech-knowledgeable older persons, (b) cognitive and affective variables and their association with the application of technology, and (c) the implications of these variables on the design of remote-delivered caregiver…

Evaluating the underlying factors behind variable rate debt.

PubMed

McCue, Michael J; Kim, Tae Hyun Tanny

2007-01-01

Recent trends show a greater usage of variable rate debt among health care bond issues. In 2004, 63.4% of the total health care bonds issued were variable rate compared with 30.6% in 1995 (Fitch Ratings, 2005). The purpose of this study is to gain a better understanding of the underlying factors, credit spread, issue characteristics, and issuer factors behind why hospitals and health system borrowers select variable rate debt compared with fixed rate debt. From 2000 to 2004, this study sampled 230 newly issued tax-exempt bonds issued by acute care hospitals and health care systems that included both variable and fixed rate debt issues. Using a logistic regression model, hospitals with variable rate debt issues were assigned a value of 1, whereas hospitals with fixed rate debt issues were assigned a value of 0. This study found a positive association between bond insurance and variable rate debt and a negative association between callable feature and variable rate debt. Facilities located in certificate-of-need states that possessed higher case mix acuity, earned higher profit margins, generated higher debt service coverage, and held less debt were more likely to issue variable rate debt. Overall, hospital managers and board members of hospitals possessing a strong financial performance have an interest in utilizing variable rate debt to lower their cost of capital. In addition, this outcome may also reflect that investment bankers are doing a better job in educating senior hospital management about the interest rate savings benefit of variable rate compared with fixed rate debt.

Advanced supersonic propulsion study, phase 2. [propulsion system performance, design analysis and technology assessment

NASA Technical Reports Server (NTRS)

Howlett, R. A.

1975-01-01

A continuation of the NASA/P and WA study to evaluate various types of propulsion systems for advanced commercial supersonic transports has resulted in the identification of two very promising engine concepts. They are the Variable Stream Control Engine which provides independent temperature and velocity control for two coannular exhaust streams, and a derivative of this engine, a Variable Cycle Engine that employs a rear flow-inverter valve to vary the bypass ratio of the cycle. Both concepts are based on advanced engine technology and have the potential for significant improvements in jet noise, exhaust emissions and economic characteristics relative to current technology supersonic engines. Extensive research and technology programs are required in several critical areas that are unique to these supersonic Variable Cycle Engines to realize these potential improvements. Parametric cycle and integration studies of conventional and Variable Cycle Engines are reviewed, features of the two most promising engine concepts are described, and critical technology requirements and required programs are summarized.

Optimizing Estimates of Instantaneous Heart Rate from Pulse Wave Signals with the Synchrosqueezing Transform.

PubMed

Wu, Hau-Tieng; Lewis, Gregory F; Davila, Maria I; Daubechies, Ingrid; Porges, Stephen W

2016-10-17

With recent advances in sensor and computer technologies, the ability to monitor peripheral pulse activity is no longer limited to the laboratory and clinic. Now inexpensive sensors, which interface with smartphones or other computer-based devices, are expanding into the consumer market. When appropriate algorithms are applied, these new technologies enable ambulatory monitoring of dynamic physiological responses outside the clinic in a variety of applications including monitoring fatigue, health, workload, fitness, and rehabilitation. Several of these applications rely upon measures derived from peripheral pulse waves measured via contact or non-contact photoplethysmography (PPG). As technologies move from contact to non-contact PPG, there are new challenges. The technology necessary to estimate average heart rate over a few seconds from a noncontact PPG is available. However, a technology to precisely measure instantaneous heat rate (IHR) from non-contact sensors, on a beat-to-beat basis, is more challenging. The objective of this paper is to develop an algorithm with the ability to accurately monitor IHR from peripheral pulse waves, which provides an opportunity to measure the neural regulation of the heart from the beat-to-beat heart rate pattern (i.e., heart rate variability). The adaptive harmonic model is applied to model the contact or non-contact PPG signals, and a new methodology, the Synchrosqueezing Transform (SST), is applied to extract IHR. The body sway rhythm inherited in the non-contact PPG signal is modeled and handled by the notion of wave-shape function. The SST optimizes the extraction of IHR from the PPG signals and the technique functions well even during periods of poor signal to noise. We contrast the contact and non-contact indices of PPG derived heart rate with a criterion electrocardiogram (ECG). ECG and PPG signals were monitored in 21 healthy subjects performing tasks with different physical demands. The root mean square error of IHR estimated by SST is significantly better than commonly applied methods such as autoregressive (AR) method. In the walking situation, while AR method fails, SST still provides a reasonably good result. The SST processed PPG data provided an accurate estimate of the ECG derived IHR and consistently performed better than commonly applied methods such as autoregressive method.

Land Change Trends in the Great Plains: Linkages to Climate Variability and Socioeconomic Drivers

NASA Astrophysics Data System (ADS)

Drummond, M. A.

2009-12-01

Land use and land cover change have complex linkages to climate variability and change, socioeconomic driving forces, and land management challenges. To assess these land change dynamics and their driving forces in the Great Plains, we compare and contrast contemporary land conversion across seventeen ecoregions using Landsat remote sensing data and statistical analysis. Large area change analysis in agricultural regions is often hampered by the potential for substantial change detection error and the tendency for land conversions to occur in relatively small patches at the local level. To facilitate a regional scale analysis, a statistical sampling design of randomly selected 10-km by 10-km blocks is used in order to efficiently identify the types and rates of land conversions for four time periods between 1972 and 2000, stratified by relatively homogenous ecoregions. Results show a range of rates and processes of land change that vary by ecoregion contingent on the prevailing interactions between socioeconomic and environmental factors such as climate variability, water availability, and land quality. Ecoregions have differential climate and biophysical advantages for agricultural production and other land use change. Human actions further strengthen or dampen the characteristics of change through farm policy, technological advances, economic opportunities, population and demographic shifts, and surface and groundwater irrigation.

Tetrafluoroethane (R134a) hydrate formation within variable volume reactor accompanied by evaporation and condensation.

PubMed

Jeong, K; Choo, Y S; Hong, H J; Yoon, Y S; Song, M H

2015-03-01

Vast size hydrate formation reactors with fast conversion rate are required for the economic implementation of seawater desalination utilizing gas hydrate technology. The commercial target production rate is order of thousand tons of potable water per day per train. Various heat and mass transfer enhancement schemes including agitation, spraying, and bubbling have been examined to maximize the production capacities in scaled up design of hydrate formation reactors. The present experimental study focused on acquiring basic knowledge needed to design variable volume reactors to produce tetrafluoroethane hydrate slurry. Test vessel was composed of main cavity with fixed volume of 140 ml and auxiliary cavity with variable volume of 0 ∼ 64 ml. Temperatures at multiple locations within vessel and pressure were monitored while visual access was made through front window. Alternating evaporation and condensation induced by cyclic volume change provided agitation due to density differences among water and vapor, liquid and hydrate R134a as well as extended interface area, which improved hydrate formation kinetics coupled with latent heat release and absorption. Influences of coolant temperature, piston stroke/speed, and volume change period on hydrate formation kinetics were investigated. Suggestions of reactor design improvement for future experimental study are also made.

Tetrafluoroethane (R134a) hydrate formation within variable volume reactor accompanied by evaporation and condensation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeong, K.; Choo, Y. S.; Hong, H. J.

Vast size hydrate formation reactors with fast conversion rate are required for the economic implementation of seawater desalination utilizing gas hydrate technology. The commercial target production rate is order of thousand tons of potable water per day per train. Various heat and mass transfer enhancement schemes including agitation, spraying, and bubbling have been examined to maximize the production capacities in scaled up design of hydrate formation reactors. The present experimental study focused on acquiring basic knowledge needed to design variable volume reactors to produce tetrafluoroethane hydrate slurry. Test vessel was composed of main cavity with fixed volume of 140 mlmore » and auxiliary cavity with variable volume of 0 ∼ 64 ml. Temperatures at multiple locations within vessel and pressure were monitored while visual access was made through front window. Alternating evaporation and condensation induced by cyclic volume change provided agitation due to density differences among water and vapor, liquid and hydrate R134a as well as extended interface area, which improved hydrate formation kinetics coupled with latent heat release and absorption. Influences of coolant temperature, piston stroke/speed, and volume change period on hydrate formation kinetics were investigated. Suggestions of reactor design improvement for future experimental study are also made.« less

Concept and implementation of the Globalstar mobile satellite system

NASA Technical Reports Server (NTRS)

Schindall, Joel

1995-01-01

Globalstar is a satellite-based mobile communications system which provides quality wireless communications (voice and/or data) anywhere in the world except the polar regions. The Globalstar system concept is based upon technological advancements in Low Earth Orbit (LEO) satellite technology and in cellular telephone technology, including the commercial application of Code Division Multiple Access (CDMA) technologies. The Globalstar system uses elements of CDMA and Frequency Division Multiple Access (FDMA), combined with satellite Multiple Beam Antenna (MBA) technology and advanced variable-rate vocoder technology to arrive at one of the most efficient modulation and multiple access systems ever proposed for a satellite communications system. The technology used in Globalstar includes the following techniques in obtaining high spectral efficiency and affordable cost per channel: (1) CDMA modulation with efficient power control; (2) high efficiency vocoder with voice activity factor; (3) spot beam antenna for increased gain and frequency reuse; (4) weighted satellite antenna gain for broad geographic coverage; (5) multisatellite user links (diversity) to enhance communications reliability; and (6) soft hand-off between beams and satellites. Initial launch is scheduled in 1997 and the system is scheduled to be operational in 1998. The Globalstar system utilizes frequencies in L-, S- and C-bands which have the potential to offer worldwide availability with authorization by the appropriate regulatory agencies.

Ecological prediction with nonlinear multivariate time-frequency functional data models

USGS Publications Warehouse

Yang, Wen-Hsi; Wikle, Christopher K.; Holan, Scott H.; Wildhaber, Mark L.

2013-01-01

Time-frequency analysis has become a fundamental component of many scientific inquiries. Due to improvements in technology, the amount of high-frequency signals that are collected for ecological and other scientific processes is increasing at a dramatic rate. In order to facilitate the use of these data in ecological prediction, we introduce a class of nonlinear multivariate time-frequency functional models that can identify important features of each signal as well as the interaction of signals corresponding to the response variable of interest. Our methodology is of independent interest and utilizes stochastic search variable selection to improve model selection and performs model averaging to enhance prediction. We illustrate the effectiveness of our approach through simulation and by application to predicting spawning success of shovelnose sturgeon in the Lower Missouri River.

Empirical Modeling of Information Communication Technology Usage Behaviour among Business Education Teachers in Tertiary Colleges of a Developing Country

ERIC Educational Resources Information Center

Isiyaku, Dauda Dansarki; Ayub, Ahmad Fauzi Mohd; Abdulkadir, Suhaida

2015-01-01

This study has empirically tested the fitness of a structural model in explaining the influence of two exogenous variables (perceived enjoyment and attitude towards ICTs) on two endogenous variables (behavioural intention and teachers' Information Communication Technology (ICT) usage behavior), based on the proposition of Technology Acceptance…

Predicting Middle School Students' Use of Web 2.0 Technologies out of School Using Home and School Technological Variables

ERIC Educational Resources Information Center

Hughes, Joan E.; Read, Michelle F.; Jones, Sara; Mahometa, Michael

2015-01-01

This study used multiple regression to identify predictors of middle school students' Web 2.0 activities out of school, a construct composed of 15 technology activities. Three middle schools participated, where sixth- and seventh-grade students completed a questionnaire. Independent predictor variables included three demographic and five computer…

Modelling the Intention to Use Technology for Teaching Mathematics among Pre-Service Teachers in Serbia

ERIC Educational Resources Information Center

Teo, Timothy; Milutinovic, Verica

2015-01-01

This study aims to examine the variables that influence Serbian pre-service teachers' intention to use technology to teach mathematics. Using the technology acceptance model (TAM) as the framework, we developed a research model to include subjective norm, knowledge of mathematics, and facilitating conditions as external variables to the TAM. In…

Development of a new model for batch sedimentation and application to secondary settling tanks design.

PubMed

Karamisheva, Ralica D; Islam, M A

2005-01-01

Assuming that settling takes place in two zones (a constant rate zone and a variable rate zone), a model using four parameters accounting for the nature of the water-suspension system has been proposed for describing batch sedimentation processes. The sludge volume index (SVI) has been expressed in terms of these parameters. Some disadvantages of the SVI application as a design parameter have been pointed out, and it has been shown that a relationship between zone settling velocity and sludge concentration is more consistent for describing the settling behavior and for design of settling tanks. The permissible overflow rate has been related to the technological parameters of secondary settling tank by simple working equations. The graphical representations of these equations could be used to optimize the design and operation of secondary settling tanks.

Applying Reactive Barrier Technology to Enhance Microbially-mediated Denitrification during Managed Aquifer Recharge

NASA Astrophysics Data System (ADS)

Beganskas, S.; Weir, W. B.; Harmon, R. E.; Gorski, G.; Fisher, A. T.; Saltikov, C.; Young, K. S.; Runneals, D.; Teo, E. K.; Stoneburner, B.; Hernandez, J.

2015-12-01

We are running field experiments to observe and quantify microbially-mediated water quality improvement via denitrification during infiltration in the shallow subsurface. Nitrate is a pervasive groundwater contaminant, and nitrate removal through denitrification can occur during infiltration in natural and anthropogenic systems, including during managed aquifer recharge (MAR). The rate of denitrification can vary depending on factors such as infiltration rate; previous work suggests that denitrification rates can increase monotonically with infiltration rates until reaching a critical threshold. We are performing controlled field tests of variables that affect denitrification rate, including sampling to link water chemistry changes to microbial ecology and activity. This study explores how microbial activity and denitrification rates respond to different infiltration rates and the presence or absence of a reactive material (wood chips, a carbon source). We are conducting four two-week-long tests, each under different conditions. For each test, we measure bulk infiltration rate (the sum of lateral and vertical infiltration), vertical infiltration rate using heat as a tracer, and water level. We collect surface and subsurface water samples daily, and we collect soil samples at the start and end of each test. For each water sample, we are measuring NO3-, NO2-, NH3, DOC, and N and O isotopes in nitrate. Soil samples will be tested for grain size, total C/N, and the presence of microbiological genes associated with denitrification. These results will expand our knowledge of the conditions under which denitrification occurs by implicating specific microorganisms and physical infiltration parameters. Our design has the potential for additional experimentation with variables that impact water chemistry during infiltration. This study has broad applications for designing MAR systems that effectively improve water supply and water quality.

FHR Process Instruments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holcomb, David Eugene

2015-01-01

Fluoride salt-cooled High temperature Reactors (FHRs) are entering into early phase engineering development. Initial candidate technologies have been identified to measure all of the required process variables. The purpose of this paper is to describe the proposed measurement techniques in sufficient detail to enable assessment of the proposed instrumentation suite and to support development of the component technologies. This paper builds upon the instrumentation chapter of the recently published FHR technology development roadmap. Locating instruments outside of the intense core radiation and high-temperature fluoride salt environment significantly decreases their environmental tolerance requirements. Under operating conditions, FHR primary coolant salt ismore » a transparent, low-vapor-pressure liquid. Consequently, FHRs can employ standoff optical measurements from above the salt pool to assess in-vessel conditions. For example, the core outlet temperature can be measured by observing the fuel s blackbody emission. Similarly, the intensity of the core s Cerenkov glow indicates the fission power level. Short-lived activation of the primary coolant provides another means for standoff measurements of process variables. The primary coolant flow and neutron flux can be measured using gamma spectroscopy along the primary coolant piping. FHR operation entails a number of process measurements. Reactor thermal power and core reactivity are the most significant variables for process control. Thermal power can be determined by measuring the primary coolant mass flow rate and temperature rise across the core. The leading candidate technologies for primary coolant temperature measurement are Au-Pt thermocouples and Johnson noise thermometry. Clamp-on ultrasonic flow measurement, that includes high-temperature tolerant standoffs, is a potential coolant flow measurement technique. Also, the salt redox condition will be monitored as an indicator of its corrosiveness. Both electrochemical techniques and optical spectroscopy are candidate fluoride salt redox measurement methods. Coolant level measurement can be performed using radar-level gauges located in standpipes above the reactor vessel. While substantial technical development remains for most of the instruments, industrially compatible instruments based upon proven technology can be reasonably extrapolated from the current state of the art.« less

Stochastic Lotka-Volterra equations: A model of lagged diffusion of technology in an interconnected world

NASA Astrophysics Data System (ADS)

Chakrabarti, Anindya S.

2016-01-01

We present a model of technological evolution due to interaction between multiple countries and the resultant effects on the corresponding macro variables. The world consists of a set of economies where some countries are leaders and some are followers in the technology ladder. All of them potentially gain from technological breakthroughs. Applying Lotka-Volterra (LV) equations to model evolution of the technology frontier, we show that the way technology diffuses creates repercussions in the partner economies. This process captures the spill-over effects on major macro variables seen in the current highly globalized world due to trickle-down effects of technology.

The Base Engine for Solar Stirling Power

NASA Technical Reports Server (NTRS)

Meijer, R. J.; Godett, T. M.

1984-01-01

A new concept in Stirling engine technology is embodied in the base engine now being developed at Stirling Thermal Motors, Inc. This is a versatile energy conversion unit suitable for many different applications and heat sources. The base engine, rated 40 kW at 2800 RPM, is a four-cylinder, double-acting variable displacement Stirling engine with pressurized crankcase and rotating shaft seal. Remote-heating technology is incorporated with a stacked-heat-exchanger configuration and a liquid metal heat pipe connected to a distinctly separate combustor or other heat source. High efficiency over a wide range of operating conditions, long life, low manufacturing cost and low material cost are specifically emphasized. The base engine, its design philosophy and approach, its projected performance, and some of its more attractive applications are described.

Compensation of chief executive officers at nonprofit US hospitals.

PubMed

Joynt, Karen E; Le, Sidney T; Orav, E John; Jha, Ashish K

2014-01-01

Hospital chief executive officers (CEOs) can shape the priorities and performance of their organizations. The degree to which their compensation is based on their hospitals' quality performance is not well known. To characterize CEO compensation and examine its relation with quality metrics. Retrospective observational study. Participants included 1877 CEOs at 2681 private, nonprofit US hospitals. We used linear regression to identify hospital structural characteristics associated with CEO pay. We then determined the degree to which a hospital's performance on financial metrics, technologic metrics, quality metrics, and community benefit in 2008 was associated with CEO pay in 2009. The CEOs in our sample had a mean compensation of $595,781 (median, $404,938) in 2009. In multivariate analyses, CEO pay was associated with the number of hospital beds overseen ($550 for each additional bed; 95% CI, 429-671; P < .001), teaching status ($425,078 more at major teaching vs nonteaching hospitals; 95% CI, 315,238-534,918; P < .001), and urban location. Hospitals with high levels of advanced technologic capabilities compensated their CEOs $135,862 more (95% CI, 80,744-190,990; P < .001) than did hospitals with low levels of technology. Hospitals with high performance on patient satisfaction compensated their CEOs $51,706 more than did those with low performance on patient satisfaction (95% CI, 15,166-88,247; P = .006). We found no association between CEO pay and hospitals' margins, liquidity, capitalization, occupancy rates, process quality performance, mortality rates, readmission rates, or measures of community benefit. Compensation of CEOs at nonprofit hospitals was highly variable across the country. Compensation was associated with technology and patient satisfaction but not with processes of care, patient outcomes, or community benefit.

Effects of a Passive Online Software Application on Heart Rate Variability and Autonomic Nervous System Balance.

PubMed

Rubik, Beverly

2017-01-01

This study investigated whether short-term exposure to a passive online software application of purported subtle energy technology would affect heart rate variability (HRV) and associated autonomic nervous system measures. This was a randomized, double-blinded, sham-controlled clinical trial (RCT). The study took place in a nonprofit laboratory in Emeryville, California. Twenty healthy, nonsmoking subjects (16 females), aged 40-75 years, participated. Quantum Code Technology ™ (QCT), a purported subtle energy technology, was delivered through a passive software application (Heart+ App) on a smartphone placed <1 m from subjects who were seated and reading a catalog. HRV was measured for 5 min in triplicate for each condition via finger plethysmography using a Food and Drug Administration medically approved HRV measurement device. Measurements were made at baseline and 35 min following exposure to the software applications. The following parameters were calculated and analyzed: heart rate, total power, standard deviation node-to-node, root mean square sequential difference, low frequency to high frequency ratio (LF/HF), low frequency (LF), and high frequency (HF). Paired samples t-tests showed that for the Heart+ App, mean LF/HF decreased (p = 9.5 × 10 -4 ), while mean LF decreased in a trend (p = 0.06), indicating reduced sympathetic dominance. Root mean square sequential difference increased for the Heart+ App, showing a possible trend (p = 0.09). Post-pre differences in LF/HF for sham compared with the Heart+ App were also significant (p < 0.008) by independent t-test, indicating clinical relevance. Significant beneficial changes in mean LF/HF, along with possible trends in mean LF and root mean square sequential difference, were observed in subjects following 35 min exposure to the Heart+ App that was working in the background on an active smartphone untouched by the subjects. This may be the first RCT to show that specific frequencies of a purported non-Hertzian type of subtle energy conveyed by software applications broadcast from personal electronic devices can be bioactive and beneficially impact autonomic nervous system balance.

Parenting Behaviors, Parent Heart Rate Variability, and Their Associations with Adolescent Heart Rate Variability.

PubMed

Graham, Rebecca A; Scott, Brandon G; Weems, Carl F

2017-05-01

Adolescence is a potentially important time in the development of emotion regulation and parenting behaviors may play a role. We examined associations among parenting behaviors, parent resting heart rate variability, adolescent resting heart rate variability and parenting behaviors as moderators of the association between parent and adolescent resting heart rate variability. Ninety-seven youth (11-17 years; 49.5 % female; 34 % African American, 37.1 % Euro-American, 22.6 % other/mixed ethnic background, and 7.2 % Hispanic) and their parents (n = 81) completed a physiological assessment and questionnaires assessing parenting behaviors. Inconsistent discipline and corporal punishment were negatively associated with adolescent resting heart rate variability, while positive parenting and parental involvement were positively associated. Inconsistent discipline and parental involvement moderated the relationship between parent and adolescent resting heart rate variability. The findings provide evidence for a role of parenting behaviors in shaping the development of adolescent resting heart rate variability with inconsistent discipline and parental involvement potentially influencing the entrainment of resting heart rate variability in parents and their children.

Monitoring fetal heart rate during pregnancy: contributions from advanced signal processing and wearable technology.

PubMed

Signorini, Maria G; Fanelli, Andrea; Magenes, Giovanni

2014-01-01

Monitoring procedures are the basis to evaluate the clinical state of patients and to assess changes in their conditions, thus providing necessary interventions in time. Both these two objectives can be achieved by integrating technological development with methodological tools, thus allowing accurate classification and extraction of useful diagnostic information. The paper is focused on monitoring procedures applied to fetal heart rate variability (FHRV) signals, collected during pregnancy, in order to assess fetal well-being. The use of linear time and frequency techniques as well as the computation of non linear indices can contribute to enhancing the diagnostic power and reliability of fetal monitoring. The paper shows how advanced signal processing approaches can contribute to developing new diagnostic and classification indices. Their usefulness is evaluated by comparing two selected populations: normal fetuses and intra uterine growth restricted (IUGR) fetuses. Results show that the computation of different indices on FHRV signals, either linear and nonlinear, gives helpful indications to describe pathophysiological mechanisms involved in the cardiovascular and neural system controlling the fetal heart. As a further contribution, the paper briefly describes how the introduction of wearable systems for fetal ECG recording could provide new technological solutions improving the quality and usability of prenatal monitoring.

Determinants of Intention to Use eLearning Based on the Technology Acceptance Model

ERIC Educational Resources Information Center

Punnoose, Alfie Chacko

2012-01-01

The purpose of this study was to find some of the predominant factors that determine the intention of students to use eLearning in the future. Since eLearning is not just a technology acceptance decision but also involves cognition, this study extended its search beyond the normal technology acceptance variables into variables that could affect…

The Estrada Real project and endemic diseases: the case of schistosomiasis, geoprocessing and tourism.

PubMed

Carvalho, Omar S; Scholte, Ronaldo G C; Guimarães, Ricardo J P S; Freitas, Corina C; Drummond, Sandra C; Amaral, Ronaldo S; Dutra, Luciano V; Oliveira, Guilherme; Massara, Cristiano L; Enk, Martin J

2010-07-01

Geographical Information System (GIS) is a tool that has recently been applied to better understand spatial disease distributions. Using meteorological, social, sanitation, mollusc distribution data and remote sensing variables, this study aimed to further develop the GIS technology by creating a model for the spatial distribution of schistosomiasis and to apply this model to an area with rural tourism in the Brazilian state of Minas Gerais (MG). The Estrada Real, covering about 1,400 km, is the largest and most important Brazilian tourism project, involving 163 cities in MG with different schistosomiasis prevalence rates. The model with three variables showed a R(2) = 0.34, with a standard deviation of risk estimated adequate for public health needs. The main variables selected for modelling were summer vegetation, summer minimal temperature and winter minimal temperature. The results confirmed the importance of Remote Sensing data and the valuable contribution of GIS in identifying priority areas for intervention in tourism regions which are endemic to schistosomiasis.

ATAD control goals through the analysis of process variables and evaluation of quality, production and cost.

PubMed

Nájera, S; Gil-Martínez, M; Zambrano, J A

2015-01-01

The aim of this paper is to establish and quantify different operational goals and control strategies in autothermal thermophilic aerobic digestion (ATAD). This technology appears as an alternative to conventional sludge digestion systems. During the batch-mode reaction, high temperatures promote sludge stabilization and pasteurization. The digester temperature is usually the only online, robust, measurable variable. The average temperature can be regulated by manipulating both the air injection and the sludge retention time. An improved performance of diverse biochemical variables can be achieved through proper manipulation of these inputs. However, a better quality of treated sludge usually implies major operating costs or a lower production rate. Thus, quality, production and cost indices are defined to quantify the outcomes of the treatment. Based on these, tradeoff control strategies are proposed and illustrated through some examples. This paper's results are relevant to guide plant operators, to design automatic control systems and to compare or evaluate the control performance on ATAD systems.

Spatially offset Raman spectroscopy for explosives detection through difficult (opaque) containers

NASA Astrophysics Data System (ADS)

Maskall, Guy T.; Bonthron, Stuart; Crawford, David

2013-10-01

With the continuing threat to aviation security from homemade explosive devices, the restrictions on taking a volume of liquid greater than 100 ml onto an aircraft remain in place. From January 2014, these restrictions will gradually be reduced via a phased implementation of technological screening of Liquids, Aerosols and Gels (LAGs). Raman spectroscopy offers a highly sensitive, and specific, technique for the detection and identification of chemicals. Spatially Offset Raman Spectroscopy (SORS), in particular, offers significant advantages over conventional Raman spectroscopy for detecting and recognizing contents within optically challenging (Raman active) containers. Containers vary enormously in their composition; glass type, plastic type, thickness, reflectance, and pigmentation are all variable and cause an infinite range of absorbances, fluorescence backgrounds, Rayleigh backscattered laser light, and container Raman bands. In this paper we show that the data processing chain for Cobalt Light Systems' INSIGHT100 bottlescanner is robust to such variability. We discuss issues of model selection for the detection stage and demonstrate an overall detection rate across a wide range of threats and containers of 97% with an associated false alarm rate of 0.1% or lower.

Value of Exercise Stress Electrocardiography for Risk Stratification in Patients With Suspected or Known Coronary Artery Disease in the Era of Advanced Imaging Technologies

PubMed Central

Bourque, Jamieson M.; Beller, George A.

2015-01-01

Exercise stress electrocardiography (ExECG) is underutilized as the initial test modality in patients with interpretable electrocardiograms able to exercise. Although, stress myocardial imaging techniques provide valuable diagnostic and prognostic information, variables derived from ExECG can yield substantial data for risk stratification, either supplementary to imaging variables, or without concurrent imaging. In addition to exercise-induced ischemic ST depression, such markers as ST segment elevation in lead AVR, abnormal heart rate recovery post-exercise, failure to achieve target heart rate, and poor exercise capacity improve risk stratification of ExECG. For example, patients achieving ≥10 METS on ExECG have a very low prevalence of inducible ischemia and an excellent prognosis. In contrast, cardiac imaging techniques add diagnostic and prognostic value in higher risk populations (e.g. poor functional capacity, diabetes, chronic kidney disease). Optimal test selection for symptomatic patients with suspected coronary artery disease requires a patient-centered approach factoring in the risk/benefit ratio and cost-effectiveness. PMID:26563861

Fetal heart rate patterns at 20 to 24 weeks gestation as recorded by fetal electrocardiography

PubMed Central

Hofmeyr, F; Groenewald, CA; Nel, DG; Myers, MM; Fifer, WP; Signore, C; Hankins, GDV; Odendaal, HJ

2014-01-01

Introduction With advancing technology it has become possible to accurately record and assess fetal heart rate (FHR) patterns from gestations as early as 20 weeks. The aim of our study was to describe early patterns of FHR, as recorded by transabdominal fetal electrocardiogram according to the Dawes-Redman criteria. Accordingly, short-term variability, basal heart rate, accelerations and decelerations were quantified at 20-24 weeks gestation among women with uncomplicated pregnancies. Methods This study was conducted in a subset of participants enrolled in a large prospective pregnancy cohort study. Our final data set consisted of 281 recordings of women with good perinatal outcomes that had undergone fetal electrocardiographic assessment as part of the Safe Passage Study. Results The success rate of the recordings was 95.4%. The mean frequency of small and large accelerations was 0.5 and 0.1 per 10 minutes respectively and that of small and large decelerations 0.3 and 0.008 per 10 minutes respectively. The mean and basal heart rates were both equal to 148.0 bpm at a median gestation of 161 days. The mean short term variation was 6.2 (SD 1.4) milliseconds and mean minute range 35.1 (SD 7.1) milliseconds. Conclusion The 20 to 24 week fetus demonstrates FHR patterns with more accelerations and decelerations, as well as higher baseline variability than was anticipated. Information from this study provides an important foundation for further, more detailed, studies of early FHR patterns. PMID:23991757

Physiological Parameter Monitoring from Optical Recordings with a Mobile Phone

PubMed Central

Scully, Christopher G.; Lee, Jinseok; Meyer, Joseph; Gorbach, Alexander M.; Granquist-Fraser, Domhnull; Mendelson, Yitzhak

2012-01-01

We show that a mobile phone can serve as an accurate monitor for several physiological variables, based on its ability to record and analyze the varying color signals of a fingertip placed in contact with its optical sensor. We confirm the accuracy of measurements of breathing rate, cardiac R-R intervals, and blood oxygen saturation, by comparisons to standard methods for making such measurements (respiration belts, ECGs, and pulse-oximeters, respectively). Measurement of respiratory rate uses a previously reported algorithm developed for use with a pulse-oximeter, based on amplitude and frequency modulation sequences within the light signal. We note that this technology can also be used with recently developed algorithms for detection of atrial fibrillation or blood loss. PMID:21803676

Public funding of pharmaceuticals in The Netherlands: investigating the effect of evidence, process and context on CVZ decision-making.

PubMed

Cerri, Karin H; Knapp, Martin; Fernandez, Jose-Luis

2014-09-01

The College Voor Zorgverzekeringen (CVZ) provides guidance to the Dutch healthcare system on funding and use of new pharmaceutical technologies. This study examined the impact of evidence, process and context factors on CVZ decisions in 2004-2009. A data set of CVZ decisions pertaining to pharmaceutical technologies was created, including 29 variables extracted from published information. A three-category outcome variable was used, defined as the decision to 'recommend', 'restrict' or 'not recommend' a technology. Technologies included in list 1A/1B or on the expensive drug list were considered recommended; those included in list 2 or for which patient co-payment is required were considered restricted; technologies not included on any reimbursement list were classified as 'not recommended'. Using multinomial logistic regression, the relative contribution of explanatory variables on CVZ decisions was assessed. In all, 244 technology appraisals (256 technologies) were analysed, with 51%, of technologies recommended, 33% restricted and 16% not recommended by CVZ for funding. The multinomial model showed significant associations (p ≤ 0.10) between CVZ outcome and several variables, including: (1) use of an active comparator and demonstration of statistical superiority of the primary endpoint in clinical trials, (2) pharmaceutical budget impact associated with introduction of the technology, (3) therapeutic indication and (4) prevalence of the target population. Results confirm the value of a comprehensive and multivariate approach to understanding CVZ decision-making.

Radio-tracking large wilderness mammals: integration of GPS and Argos technologies

USGS Publications Warehouse

Schwartz, Charles C.; Arthur, Steve M.

1999-01-01

We tested 30 prototype global positioning system (GPS) radiocollars on brown bears (Ursus arctos) over a 3-year period on the Kenai Peninsula, Alaska. Collars were of 2 design types: GPS units with an Argos (Argos Data collection and Location System) satellite uplink (n = 19) and GPS units where the data were stored on board (n = 10) for retrieval at a later date. All units also contained a conventional VHF (very high frequency) transmitter and weighed 1.7 kg. GPS-Argos units obtained 10-82% of expected GPS fixes, and fix rate declined significantly (P < 0.05) with time after deployment. Argos uplink success (proportion of successful transmissions of stored data) was linearly related to GPS fix rate (r = 0.91, P < 0.001). Storeon-board units obtained significantly more successful fixes when compared with the GPS-Argos units (t = -4.009, P < 0.001). Fix success rate for deployed store-on-board collars ranged from 13-96%; because of the increased number of attempted fixes per day, these collars obtained fixes on 97% of days deployed. Accuracy of the GPS units was less than predicted by the NAVSTAR GPS technology using the course acquisition code. Reduced accuracy was likely a result of the proportion of 2-dimensional versus 3-dimensional fixes obtained, although we could not determine this statistic from recorded data. Increased overstory closure was the only variable measured that partially explained the reduced likelihood of a successful fix. Stem density, stem diameter, and overstory height measured within 3 m of the collar did not affect fix success. GPS fix success rates for collars attached to bears varied more and were lower than fix rates for stationary collars placed in various vegetation types, suggesting that the bear, terrain, and movement all influence both fix and uplink success rate. Application of this new technology to grizzly and brown bear research and comparisons to studies with moose (Alces alces) are discussed.

Radiotracking large wilderness mammals: Integration of GPS and Argos technology

USGS Publications Warehouse

Schwartz, Charles C.; Arthur, Steve M.

1999-01-01

We tested 30 prototype global positioning system (GPS) radiocollars on brown bears (Ursus arctos) over a 3-year period on the Kenai Peninsula, Alaska. Collars were of 2 design types: GPS with an Argos (Argos Data collection and Location System) satellite uplink (n=19) and GPS unites where the data were stored on board (n=10) for retrieval at a later date. All units also contained a conventional VHF (very high frequency) transmitter and weighed 1.7 kg. GPS-Argos united obtained 10-82% of expected GPS fixes, and fix rate declined significantly (P<0.05) with time after deployment. Argos uplink success (proportion of successful transmissions of stored data) was linearly related to GPS fix rate (r=0.91, P<0.001). Store-on-board units obtained significantly more successful fixes when compared with the GPS-Argos units (t=-4.009, P<0.001). Fix success rate for deployed store-on-board collars ranged from 13-96%; because of the increased number of attempted fixes per day, these collars obtained fixes on 97% of days deployed. Accuracy of the GPS units was less than predicted by the NAVSTAR GPS technology using the course acquisition code. Reduced accuracy was likely a result of the proportion of 2-dimensional versus 3-dimensional fixes obtained, although we could not determine this statistic from recorded data. Increased overstory closure was the only variable measured that partially explained the reduced likelihood of a successful fix. Stem density, stem diameter, and overstory height measured within 3 m of the collar did not affect fix success. GPS fix success rates for collars attached to bears varied more and were lower than fix rates for stationary collars placed in various vegetation types, suggesting that the bear, terrain, and movement all influence both fix and uplink success rate. Application of this new technology to grizzly and brown bear research and comparisons to studies with moose (Alces alces) are discussed.

Water resources planning for rivers draining into Mobile Bay

NASA Technical Reports Server (NTRS)

April, G. C.

1976-01-01

The application of remote sensing, automatic data processing, modeling and other aerospace related technologies to hydrological engineering and water resource management are discussed for the entire river drainage system which feeds the Mobile Bay estuary. The adaptation and implementation of existing mathematical modeling methods are investigated for the purpose of describing the behavior of Mobile Bay. Of particular importance are the interactions that system variables such as river flow rate, wind direction and speed, and tidal state have on the water movement and quality within the bay system.

A framework for evaluating capital structure.

PubMed

Sterns, J B; Majidzadeh, T K

1995-01-01

This article describes the rationale for accessing variable rate debt and the appropriate amount. It explores historical interest rate relationships and explains the motivation for incurring variable rate debt during certain interest rate environments. The article also explores the risks of variable rate debt and the liquid resources needed for prudent asset-liability management. Finally, the article outlines the financial statement impact of using variable rate debt.

BIOPHYSICAL CHARACTERISATION OF THE UNDER-APPRECIATED AND IMPORTANT RELATIONSHIP BETWEEN HEART RATE VARIABILITY AND HEART RATE

PubMed Central

Monfredi, Oliver; Lyashkov, Alexey E; Johnsen, Anne-Berit; Inada, Shin; Schneider, Heiko; Wang, Ruoxi; Nirmalan, Mahesh; Wisloff, Ulrik; Maltsev, Victor A; Lakatta, Edward G; Zhang, Henggui; Boyett, Mark R

2014-01-01

Heart rate variability (beat-to-beat changes in the RR interval) has attracted considerable attention over the last 30+ years (PubMed currently lists >17,000 publications). Clinically, a decrease in heart rate variability is correlated to higher morbidity and mortality in diverse conditions, from heart disease to foetal distress. It is usually attributed to fluctuation in cardiac autonomic nerve activity. We calculated heart rate variability parameters from a variety of cardiac preparations (including humans, living animals, Langendorff-perfused heart and single sinoatrial nodal cell) in diverse species, combining this with data from previously published papers. We show that regardless of conditions, there is a universal exponential decay-like relationship between heart rate variability and heart rate. Using two biophysical models, we develop a theory for this, and confirm that heart rate variability is primarily dependent on heart rate and cannot be used in any simple way to assess autonomic nerve activity to the heart. We suggest that the correlation between a change in heart rate variability and altered morbidity and mortality is substantially attributable to the concurrent change in heart rate. This calls for re-evaluation of the findings from many papers that have not adjusted properly or at all for heart rate differences when comparing heart rate variability in multiple circumstances. PMID:25225208

Field potential soil variability index to identify precision agriculture opportunity

USDA-ARS?s Scientific Manuscript database

Precision agriculture (PA) technologies used for identifying and managing within-field variability are not widely used despite decades of advancement. Technological innovations in agronomic tools, such as canopy reflectance or electrical conductivity sensors, have created opportunities to achieve a ...

Qualification Testing Versus Quantitative Reliability Testing of PV - Gaining Confidence in a Rapidly Changing Technology: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurtz, Sarah; Repins, Ingrid L; Hacke, Peter L

Continued growth of PV system deployment would be enhanced by quantitative, low-uncertainty predictions of the degradation and failure rates of PV modules and systems. The intended product lifetime (decades) far exceeds the product development cycle (months), limiting our ability to reduce the uncertainty of the predictions for this rapidly changing technology. Yet, business decisions (setting insurance rates, analyzing return on investment, etc.) require quantitative risk assessment. Moving toward more quantitative assessments requires consideration of many factors, including the intended application, consequence of a possible failure, variability in the manufacturing, installation, and operation, as well as uncertainty in the measured accelerationmore » factors, which provide the basis for predictions based on accelerated tests. As the industry matures, it is useful to periodically assess the overall strategy for standards development and prioritization of research to provide a technical basis both for the standards and the analysis related to the application of those. To this end, this paper suggests a tiered approach to creating risk assessments. Recent and planned potential improvements in international standards are also summarized.« less

PlaIMoS: A Remote Mobile Healthcare Platform to Monitor Cardiovascular and Respiratory Variables

PubMed Central

Miramontes, Ramses; Aquino, Raúl; Flores, Arturo; Rodríguez, Guillermo; Anguiano, Rafael; Ríos, Arturo; Edwards, Arthur

2017-01-01

The number of elderly and chronically ill patients has grown significantly over the past few decades as life expectancy has increased worldwide, leading to increased demands on the health care system and significantly taxing traditional health care practices. Consequently, there is an urgent need to use technology to innovate and more constantly and intensely monitor, report and analyze critical patient physiological parameters beyond conventional clinical settings in a more efficient and cost effective manner. This paper presents a technological platform called PlaIMoS which consists of wearable sensors, a fixed measurement station, a network infrastructure that employs IEEE 802.15.4 and IEEE 802.11 to transmit data with security mechanisms, a server to analyze all information collected and apps for iOS, Android and Windows 10 mobile operating systems to provide real-time measurements. The developed architecture, designed primarily to record and report electrocardiogram and heart rate data, also monitors parameters associated with chronic respiratory illnesses, including patient blood oxygen saturation and respiration rate, body temperature, fall detection and galvanic resistance. PMID:28106832

PlaIMoS: A Remote Mobile Healthcare Platform to Monitor Cardiovascular and Respiratory Variables.

PubMed

Miramontes, Ramses; Aquino, Raúl; Flores, Arturo; Rodríguez, Guillermo; Anguiano, Rafael; Ríos, Arturo; Edwards, Arthur

2017-01-19

The number of elderly and chronically ill patients has grown significantly over the past few decades as life expectancy has increased worldwide, leading to increased demands on the health care system and significantly taxing traditional health care practices. Consequently, there is an urgent need to use technology to innovate and more constantly and intensely monitor, report and analyze critical patient physiological parameters beyond conventional clinical settings in a more efficient and cost effective manner. This paper presents a technological platform called PlaIMoS which consists of wearable sensors, a fixed measurement station, a network infrastructure that employs IEEE 802.15.4 and IEEE 802.11 to transmit data with security mechanisms, a server to analyze all information collected and apps for iOS, Android and Windows 10 mobile operating systems to provide real-time measurements. The developed architecture, designed primarily to record and report electrocardiogram and heart rate data, also monitors parameters associated with chronic respiratory illnesses, including patient blood oxygen saturation and respiration rate, body temperature, fall detection and galvanic resistance.

Summary of Utility Studies: Smart Grid Investment Grant Consumer Behavior Study Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cappers, Peter; Todd, Annika; Goldamn, Charles A.

2013-05-01

The U.S. Department of Energy’s (DOE’s) Smart Grid Investment Grant (SGIG) program is working with a subset of the 99 SGIG projects to assess the response of mass market consumers (i.e., residential and small commercial customers) to time-varying electricity prices (referred to herein as time-based rate programs) in conjunction with the deployment of advanced metering infrastructure (AMI) and associated technologies. The effort provides an opportunity to advance the electric industry’s understanding of consumer behavior. In addition, DOE is attempting to apply a consistent study design and analysis framework for the SGIG Consumer Behavior Studies (CBS). The aim is to collectmore » information across the studies on variables and impacts that have been defined in a consistent manner. This will enable Lawrence Berkeley National Lab (LBNL), as DOE’s principal investigator for these Consumer Behavior Studies, to leverage the data from the individual studies and conduct comparative analysis of the impacts of AMI, time-based rate programs and enabling technologies that facilitate customer control, automation and information/feedback on customer energy usage.« less

7 CFR 1735.33 - Variable interest rate loans.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Variable interest rate loans. 1735.33 Section 1735.33... § 1735.33 Variable interest rate loans. After June 10, 1991, and prior to November 1, 1993, RUS made certain variable rate loans at interest rates less than 5 percent but not less than 2 percent. For those...

Endogenous Technology Adoption and Medical Costs.

PubMed

Lamiraud, Karine; Lhuillery, Stephane

2016-09-01

Despite the claim that technology has been one of the most important drivers of healthcare spending growth over the past decades, technology variables are rarely introduced explicitly in cost equations. Furthermore, technology is often considered exogenous. Using 1996-2007 panel data on Swiss geographical areas, we assessed the impact of technology availability on per capita healthcare spending covered by basic health insurance whilst controlling for the endogeneity of health technology availability variables. Our results suggest that medical research, patent intensity and the density of employees working in the medical device industry are influential factors for the adoption of technology and can be used as instruments for technology availability variables in the cost equation. These results are similar to previous findings: CT and PET scanner adoption is associated with increased healthcare spending, whilst increased availability of percutaneous transluminal coronary angioplasty facilities is associated with reductions in per capita spending. However, our results suggest that the magnitude of these relationships is much greater in absolute value than that suggested by previous studies that did not control for the possible endogeneity of the availability of technologies. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

On the possible relations between solar activities and global seismicity in the solar cycle 20 to 23

NASA Astrophysics Data System (ADS)

Herdiwijaya, Dhani; Arif, Johan; Nurzaman, Muhamad Zamzam; Astuti, Isna Kusuma Dewi

2015-09-01

Solar activities consist of high energetic particle streams, electromagnetic radiation, magnetic and orbital gravitational forces. The well-know solar activity main indicator is the existence of sunspot which has mean variation in 11 years, named by solar cycle, allow for the above fluctuations. Solar activities are also related to the space weather affecting all planetary atmospheric variability, moreover to the Earth's climate variability. Large extreme space and geophysical events (high magnitude earthquakes, explosive volcanic eruptions, magnetic storms, etc.) are hazards for humankind, infrastructure, economies, technology and the activities of civilization. With a growing world population, and with modern reliance on delicate technological systems, human society is becoming increasingly vulnerable to natural hazardous events. The big question arises to the relation between solar forcing energy to the Earth's global seismic activities. Estimates are needed for the long term occurrence-rate probabilities of these extreme natural hazardous events. We studied connectivity from yearly seismic activities that refer to and sunspot number within the solar cycle 20 to 23 of year 1960 to 2013 (53 years). We found clear evidences that in general high magnitude earthquake events and their depth were related to the low solar activity.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herdiwijaya, Dhani, E-mail: dhani@as.itb.ac.id; Arif, Johan; Nurzaman, Muhamad Zamzam

Solar activities consist of high energetic particle streams, electromagnetic radiation, magnetic and orbital gravitational forces. The well-know solar activity main indicator is the existence of sunspot which has mean variation in 11 years, named by solar cycle, allow for the above fluctuations. Solar activities are also related to the space weather affecting all planetary atmospheric variability, moreover to the Earth’s climate variability. Large extreme space and geophysical events (high magnitude earthquakes, explosive volcanic eruptions, magnetic storms, etc.) are hazards for humankind, infrastructure, economies, technology and the activities of civilization. With a growing world population, and with modern reliance on delicatemore » technological systems, human society is becoming increasingly vulnerable to natural hazardous events. The big question arises to the relation between solar forcing energy to the Earth’s global seismic activities. Estimates are needed for the long term occurrence-rate probabilities of these extreme natural hazardous events. We studied connectivity from yearly seismic activities that refer to and sunspot number within the solar cycle 20 to 23 of year 1960 to 2013 (53 years). We found clear evidences that in general high magnitude earthquake events and their depth were related to the low solar activity.« less

Physicochemical properties influencing denitrification rate and microbial activity in denitrification bioreactors

NASA Astrophysics Data System (ADS)

Schmidt, C. A.

2012-12-01

The use of N-based fertilizer will need to increase to meet future demands, yet existing applications have been implicated as the main source of coastal eutrophication and hypoxic zones. Producing sufficient crops to feed a growing planet will require efficient production in combination with sustainable treatment solutions. The long-term success of denitrification bioreactors to effectively remove nitrate (NO¬3), indicates this technology is a feasible treatment option. Assessing and quantifying the media properties that affect NO¬3 removal rate and microbial activity can improve predictions on bioreactor performance. It was hypothesized that denitrification rates and microbial biomass would be correlated with total C, NO¬3 concentration, metrics of organic matter quality, media surface area and laboratory measures of potential denitrification rate. NO¬3 removal rates and microbial biomass were evaluated in mesocosms filled with different wood treatments and the unique influence of these predictor variables was determined using a multiple linear regression analysis. NO3 reduction rates were independent of NO¬3 concentration indicating zero order reaction kinetics. Temperature was strongly correlated with denitrification rate (r2=0.87; Q10=4.7), indicating the variability of bioreactor performance in differing climates. Fiber quality, and media surface area were strong (R>0.50), unique predictors of rates and microbial biomass, although C:N ratio and potential denitrification rate did not predict actual denitrification rate or microbial biomass. Utilizing a stepwise multiple linear regression, indicates that the denitrification rate can be effectively (r2=0.56;p<0.0001) predicted if the groundwater temperature, neutral detergent fiber and surface area alone are quantified. These results will assist with the widespread implementation of denitrification bioreactors to achieve significant N load reductions in large watersheds. The nitrate reduction rate as a function of groundwater temperature for all treatments. Correlations between nitrate reduction rate and properties of carbon media;

Making sense of a new technology in clinical practice: a qualitative study of patient and physician perspectives.

PubMed

Pals, Regitze A S; Hansen, Ulla M; Johansen, Clea B; Hansen, Christian S; Jørgensen, Marit E; Fleischer, Jesper; Willaing, Ingrid

2015-09-22

The number of new technologies for risk assessment available in health care is increasing. These technologies are intended to contribute to both improved care practices and improved patient outcomes. To do so however, there is a need to study how new technologies are understood and interpreted by users in clinical practice. The objective of this study was to explore patient and physician perspectives on the usefulness of a new technology to detect Cardiovascular Autonomic Neuropathy (CAN) in a specialist diabetes clinic. The technology is a handheld device that measures resting heart rate and conducts three cardiac autonomic reflex tests to evaluate heart rate variability. The study relied on three sources of data: observations of medical consultations where results of the CAN test were reported (n = 8); interviews with patients who had received the CAN test (n = 19); and interviews with physicians who reported results of the CAN test (n = 9). Data were collected at the specialist diabetes clinic between November 2013 and January 2014. Data were analysed using the concept of technological frames which is used to assess how physicians and patients understand and interpret the new technology. Physicians generally found it difficult to communicate test results to patients in terms that patients could understand and to translate results into meaningful implications for the treatment of patients. Results of the study indicate that patients did not recall having done the CAN test nor recall receiving the results. Furthermore, patients were generally unsure about the purpose of the CAN test and the implications of the results. Involving patients and physicians is essential when a new technology is introduced in clinical practice. This particularly includes the interpretation and communication processes related to its use. The integration of a new risk assessment technology into clinical practice can be accompanied by several challenges. It is suggested that more information about the CAN test be provided to patients and that a dialogue-based approach be used when communicating test results to patients in order to best support the use of the technology in clinical practice.

Thrust Vector Control for Nuclear Thermal Rockets

NASA Technical Reports Server (NTRS)

Ensworth, Clinton B. F.

2013-01-01

Future space missions may use Nuclear Thermal Rocket (NTR) stages for human and cargo missions to Mars and other destinations. The vehicles are likely to require engine thrust vector control (TVC) to maintain desired flight trajectories. This paper explores requirements and concepts for TVC systems for representative NTR missions. Requirements for TVC systems were derived using 6 degree-of-freedom models of NTR vehicles. Various flight scenarios were evaluated to determine vehicle attitude control needs and to determine the applicability of TVC. Outputs from the models yielded key characteristics including engine gimbal angles, gimbal rates and gimbal actuator power. Additional factors such as engine thrust variability and engine thrust alignment errors were examined for impacts to gimbal requirements. Various technologies are surveyed for TVC systems for the NTR applications. A key factor in technology selection is the unique radiation environment present in NTR stages. Other considerations including mission duration and thermal environments influence the selection of optimal TVC technologies. Candidate technologies are compared to see which technologies, or combinations of technologies best fit the requirements for selected NTR missions. Representative TVC systems are proposed and key properties such as mass and power requirements are defined. The outputs from this effort can be used to refine NTR system sizing models, providing higher fidelity definition for TVC systems for future studies.

Ecological momentary assessment for chronic pain in fibromyalgia using a smartphone: a randomized crossover study.

PubMed

Garcia-Palacios, A; Herrero, R; Belmonte, M A; Castilla, D; Guixeres, J; Molinari, G; Baños, R M

2014-07-01

Daily diaries are a useful way of measuring fluctuations in pain-related symptoms. However, traditional diaries do not assure the gathering of data in real time, not solving the problem of retrospective assessment. Ecological momentary assessment (EMA) by means of electronic diaries helps to improve repeated assessment. However, it is important to test its feasibility in specific populations in order to reach a wider number of people who could benefit from these procedures. The present study compares the compliance and acceptability of an electronic diary running on a smartphone using a crossover design for a sample with a specific pain condition, fibromyalgia and low familiarity with technology. Forty-seven participants were randomly assigned to one of two conditions: (1) paper diary - smartphone diary and (2) smartphone diary - paper diary, using each assessment method for 1 week. The findings of this study showed that the smartphone diary made it possible to gather more accurate and complete ratings. Besides, this method was well accepted by a sample of patients with fibromyalgia referred by a public hospital, with an important proportion of participants with low level of education and low familiarity with technology. The findings of this study support the use of smartphones for EMA even in specific populations with a specific pain condition, fibromyalgia and with low familiarity with technology. These methods could help clinicians and researchers to gather more accurate ratings of relevant pain-related variables even in populations with low familiarity with technology.

Advanced supersonic propulsion study, phases 3 and 4. [variable cycle engines

NASA Technical Reports Server (NTRS)

Allan, R. D.; Joy, W.

1977-01-01

An evaluation of various advanced propulsion concepts for supersonic cruise aircraft resulted in the identification of the double-bypass variable cycle engine as the most promising concept. This engine design utilizes special variable geometry components and an annular exhaust nozzle to provide high take-off thrust and low jet noise. The engine also provides good performance at both supersonic cruise and subsonic cruise. Emission characteristics are excellent. The advanced technology double-bypass variable cycle engine offers an improvement in aircraft range performance relative to earlier supersonic jet engine designs and yet at a lower level of engine noise. Research and technology programs required in certain design areas for this engine concept to realize its potential benefits include refined parametric analysis of selected variable cycle engines, screening of additional unconventional concepts, and engine preliminary design studies. Required critical technology programs are summarized.

Technology Assessment for Large Vertical-Lift Transport Tiltrotors

NASA Technical Reports Server (NTRS)

Germanowski, Peter J.; Stille, Brandon L.; Strauss, Michael P.

2010-01-01

The technical community has identified rotor efficiency as a critical enabling technology for large vertical-lift transport (LVLT) rotorcraft. The size and performance of LVLT aircraft will be far beyond current aircraft capabilities, enabling a transformational change in cargo transport effectiveness. Two candidate approaches for achieving high efficiency were considered for LVLT applications: a variable-diameter tiltrotor (VDTR) and a variable-speed tiltrotor (VSTR); the former utilizes variable-rotor geometry and the latter utilizes variable-rotor speed. Conceptual aircraft designs were synthesized for the VDTR and VSTR and compared to a conventional tiltrotor (CTR). The aircraft were optimized to a common objective function and bounded by a set of physical- and requirements-driven constraints. The resulting aircraft were compared for weight, size, performance, handling qualities, and other attributes. These comparisons established a measure of the relative merits of the variable-diameter and -speed rotor systems as enabling technologies for LVLT capability.

Integration of photovoltaic units into electric utility grids: experiment information requirements and selected issues

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-09-01

A number of investigations, including those conducted by The Aerospace Corporation and other contractors, have led to the recognition of technical, economic, and institutional issues relating to the interface between solar electric technologies and electric utility systems. These issues derive from three attributes of solar electric power concepts, including (1) the variability and unpredictability of the solar resources, (2) the dispersed nature of those resources which suggests the feasible deployment of small dispersed power units, and (3) a high initial capital cost coupled with relatively low operating costs. It is imperative that these integration issues be pursued in parallel withmore » the development of each technology if the nation's electric utility systems are to effectively utilize these technologies in the near to intermediate term. Analyses of three of these issues are presented: utility information requirements, generation mix and production cost impacts, and rate structures in the context of photovoltaic units integrated into the utility system. (WHK)« less

Does 3D produce more symptoms of visually induced motion sickness?

PubMed

Naqvi, Syed Ali Arsalan; Badruddin, Nasreen; Malik, Aamir Saeed; Hazabbah, Wan; Abdullah, Baharudin

2013-01-01

3D stereoscopy technology with high quality images and depth perception provides entertainment to its viewers. However, the technology is not mature yet and sometimes may have adverse effects on viewers. Some viewers have reported discomfort in watching videos with 3D technology. In this research we performed an experiment showing a movie in 2D and 3D environments to participants. Subjective and objective data are recorded and compared in both conditions. Results from subjective reporting shows that Visually Induced Motion Sickness (VIMS) is significantly higher in 3D condition. For objective measurement, ECG data is recorded to find the Heart Rate Variability (HRV), where the LF/HF ratio, which is the index of sympathetic nerve activity, is analyzed to find the changes in the participants' feelings over time. The average scores of nausea, disorientation and total score of SSQ show that there is a significant difference in the 3D condition from 2D. However, LF/HF ratio is not showing significant difference throughout the experiment.

Heavy equipment maintenance wastes and environmental management in the mining industry.

PubMed

Guerin, Turlough F

2002-10-01

Maintenance wastes, if not managed properly, represent significant environmental issues for mining operations. Petroleum hydrocarbon liquid wastes were studied at an Australian site and a review of the literature and technology vendors was carried out to identify oil/water separation technologies. Treatment technologies and practices for managing oily wastewater, used across the broader mining industry in the Asia-Pacific region, were also identified. Key findings from the study were: (1) primary treatment is required to remove grease oil contamination and to protect secondary oily wastewater treatment systems from being overloaded; (2) selection of an effective secondary treatment system is dependent on influent oil droplet size and concentration, suspended solids concentration, flow rates (and their variability), environmental conditions, maintenance schedules and effectiveness, treatment targets and costs; and (3) oily wastewater treatment systems, based on mechanical separation, are favoured over those that are chemically based, as they simplify operational requirements. Source reduction, through housekeeping, equipment and reagent modifications, and segregation and/or consolidation of hydrocarbon waste streams, minimizes treatment costs, safety and environmental impact.

Exploring healthy eating among ethnic minority students using mobile technology: Feasibility and adherence.

PubMed

Rodgers, Rachel F; Franko, Debra L; Shiyko, Mariya; Intille, Stephen; Wilson, Kelcey; O'Carroll, Dympna; Lovering, Meghan; Matsumoto, Atsushi; Iannuccilli, Alyssa; Luk, Stephanie; Shoemaker, Helen

2016-09-01

Interventions aiming to help ethnically diverse emerging adults engage in healthy eating have had limited success. The aim of this study was to assess the feasibility of and adherence to an intervention capitalizing on mobile technology to improve healthy eating. Participants created an online photo food journal and received motivational text messages three times a day. Satisfaction with the intervention was assessed, as were control variables including depression and body dissatisfaction. In addition, weight and height were measured. Levels of adherence to the photo food journal were high with approximately two photos posted a day at baseline. However, adherence rates decreased over the course of the study. Body dissatisfaction positively predicted adherence, while body mass index negatively predicted study satisfaction. Mobile technology provides innovative avenues for healthy eating interventions. Such interventions appear acceptable and feasible for a short period; however, more work is required to evaluate their viability regarding long-term engagement. © The Author(s) 2015.

Estimating Oxygen Needs for Childhood Pneumonia in Developing Country Health Systems: A New Model for Expecting the Unexpected

PubMed Central

Bradley, Beverly D.; Howie, Stephen R. C.; Chan, Timothy C. Y.; Cheng, Yu-Ling

2014-01-01

Background Planning for the reliable and cost-effective supply of a health service commodity such as medical oxygen requires an understanding of the dynamic need or ‘demand’ for the commodity over time. In developing country health systems, however, collecting longitudinal clinical data for forecasting purposes is very difficult. Furthermore, approaches to estimating demand for supplies based on annual averages can underestimate demand some of the time by missing temporal variability. Methods A discrete event simulation model was developed to estimate variable demand for a health service commodity using the important example of medical oxygen for childhood pneumonia. The model is based on five key factors affecting oxygen demand: annual pneumonia admission rate, hypoxaemia prevalence, degree of seasonality, treatment duration, and oxygen flow rate. These parameters were varied over a wide range of values to generate simulation results for different settings. Total oxygen volume, peak patient load, and hours spent above average-based demand estimates were computed for both low and high seasons. Findings Oxygen demand estimates based on annual average values of demand factors can often severely underestimate actual demand. For scenarios with high hypoxaemia prevalence and degree of seasonality, demand can exceed average levels up to 68% of the time. Even for typical scenarios, demand may exceed three times the average level for several hours per day. Peak patient load is sensitive to hypoxaemia prevalence, whereas time spent at such peak loads is strongly influenced by degree of seasonality. Conclusion A theoretical study is presented whereby a simulation approach to estimating oxygen demand is used to better capture temporal variability compared to standard average-based approaches. This approach provides better grounds for health service planning, including decision-making around technologies for oxygen delivery. Beyond oxygen, this approach is widely applicable to other areas of resource and technology planning in developing country health systems. PMID:24587089

A High-Voltage Integrated Circuit Engine for a Dielectrophoresis-based Programmable Micro-Fluidic Processor

PubMed Central

Current, K. Wayne; Yuk, Kelvin; McConaghy, Charles; Gascoyne, Peter R. C.; Schwartz, Jon A.; Vykoukal, Jody V.; Andrews, Craig

2010-01-01

A high-voltage (HV) integrated circuit has been demonstrated to transport droplets on programmable paths across its coated surface. This chip is the engine for a dielectrophoresis (DEP)-based micro-fluidic lab-on-a-chip system. This chip creates DEP forces that move and help inject droplets. Electrode excitation voltage and frequency are variable. With the electrodes driven with a 100V peak-to-peak periodic waveform, the maximum high-voltage electrode waveform frequency is about 200Hz. Data communication rate is variable up to 250kHz. This demonstration chip has a 32×32 array of nominally 100V electrode drivers. It is fabricated in a 130V SOI CMOS fabrication technology, dissipates a maximum of 1.87W, and is about 10.4 mm × 8.2 mm. PMID:23989241

Dynamic perfusion assessment during perforator flap surgery: an up-to-date

PubMed Central

MUNTEAN, MAXIMILIAN VLAD; MUNTEAN, VALENTIN; ARDELEAN, FILIP; GEORGESCU, ALEXANDRU

2015-01-01

Flap monitoring technology has progressed alongside flap design. The highly variable vascular anatomy and the complexity associated with modern perforator flaps demands dynamic, real-time, intraoperative information about the vessel location, perfusion patterns and flap physiology. Although most surgeons still assess flap perfusion and viability based solely on clinical experience, studies have shown that results may be highly variable and often misleading. Poor judgment of intraoperative perfusion leads to major complications. Employing dynamic perfusion imaging during flap reconstruction has led to a reduced complication rate, lower morbidity, shorter hospital stay, and an overall better result. With the emergence of multiple systems capable of intraoperative flap evaluation, the purpose of this article is to review the two systems that have been widely accepted and are currently used by plastic surgeons: Indocyanine green angiography (ICGA) and dynamic infrared thermography (DIRT). PMID:26609259

Heart rate variability in patients with systemic lupus erythematosus: a systematic review and methodological considerations.

PubMed

Matusik, P S; Matusik, P T; Stein, P K

2018-07-01

Aim The aim of this review was to summarize current knowledge about the scientific findings and potential clinical utility of heart rate variability measures in patients with systemic lupus erythematosus. Methods PubMed, Embase and Scopus databases were searched for the terms associated with systemic lupus erythematosus and heart rate variability, including controlled vocabulary, when appropriate. Articles published in English and available in full text were considered. Finally, 11 publications were selected, according to the systematic review protocol and were analyzed. Results In general, heart rate variability, measured in the time and frequency domains, was reported to be decreased in patients with systemic lupus erythematosus compared with controls. In some systemic lupus erythematosus studies, heart rate variability was found to correlate with inflammatory markers and albumin levels. A novel heart rate variability measure, heart rate turbulence onset, was shown to be increased, while heart rate turbulence slope was decreased in systemic lupus erythematosus patients. Reports of associations of changes in heart rate variability parameters with increasing systemic lupus erythematosus activity were inconsistent, showing decreasing heart rate variability or no relationship. However, the low/high frequency ratio was, in some studies, reported to increase with increasing disease activity or to be inversely correlated with albumin levels. Conclusions Patients with systemic lupus erythematosus have abnormal heart rate variability, which reflects cardiac autonomic dysfunction and may be related to inflammatory cytokines but not necessarily to disease activity. Thus measurement of heart rate variability could be a useful clinical tool for monitoring autonomic dysfunction in systemic lupus erythematosus, and may potentially provide prognostic information.

Application of statistical experimental design to study the formulation variables influencing the coating process of lidocaine liposomes.

PubMed

González-Rodríguez, M L; Barros, L B; Palma, J; González-Rodríguez, P L; Rabasco, A M

2007-06-07

In this paper, we have used statistical experimental design to investigate the effect of several factors in coating process of lidocaine hydrochloride (LID) liposomes by a biodegradable polymer (chitosan, CH). These variables were the concentration of CH coating solution, the dripping rate of this solution on the liposome colloidal dispersion, the stirring rate, the time since the liposome production to the liposome coating and finally the amount of drug entrapped into liposomes. The selected response variables were drug encapsulation efficiency (EE, %), coating efficiency (CE, %) and zeta potential. Liposomes were obtained by thin-layer evaporation method. They were subsequently coated with CH according the experimental plan provided by a fractional factorial (2(5-1)) screening matrix. We have used spectroscopic methods to determine the zeta potential values. The EE (%) assay was carried out in dialysis bags and the brilliant red probe was used to determine CE (%) due to its property of forming molecular complexes with CH. The graphic analysis of the effects allowed the identification of the main formulation and technological factors by the analysis of the selected responses and permitted the determination of the proper level of these factors for the response improvement. Moreover, fractional design allowed quantifying the interactions between the factors, which will consider in next experiments. The results obtained pointed out that LID amount was the predominant factor that increased the drug entrapment capacity (EE). The CE (%) response was mainly affected by the concentration of the CH solution and the stirring rate, although all the interactions between the main factors have statistical significance.

A Robust Unified Approach to Analyzing Methylation and Gene Expression Data

PubMed Central

Khalili, Abbas; Huang, Tim; Lin, Shili

2009-01-01

Microarray technology has made it possible to investigate expression levels, and more recently methylation signatures, of thousands of genes simultaneously, in a biological sample. Since more and more data from different biological systems or technological platforms are being generated at an incredible rate, there is an increasing need to develop statistical methods that are applicable to multiple data types and platforms. Motivated by such a need, a flexible finite mixture model that is applicable to methylation, gene expression, and potentially data from other biological systems, is proposed. Two major thrusts of this approach are to allow for a variable number of components in the mixture to capture non-biological variation and small biases, and to use a robust procedure for parameter estimation and probe classification. The method was applied to the analysis of methylation signatures of three breast cancer cell lines. It was also tested on three sets of expression microarray data to study its power and type I error rates. Comparison with a number of existing methods in the literature yielded very encouraging results; lower type I error rates and comparable/better power were achieved based on the limited study. Furthermore, the method also leads to more biologically interpretable results for the three breast cancer cell lines. PMID:20161265

Linear units improve articulation between social and physical constructs: An example from caregiver parameterization for children supported by complex medical technologies

NASA Astrophysics Data System (ADS)

Bezruczko, N.; Stanley, T.; Battle, M.; Latty, C.

2016-11-01

Despite broad sweeping pronouncements by international research organizations that social sciences are being integrated into global research programs, little attention has been directed toward obstacles blocking productive collaborations. In particular, social sciences routinely implement nonlinear, ordinal measures, which fundamentally inhibit integration with overarching scientific paradigms. The widely promoted general linear model in contemporary social science methods is largely based on untransformed scores and ratings, which are neither objective nor linear. This issue has historically separated physical and social sciences, which this report now asserts is unnecessary. In this research, nonlinear, subjective caregiver ratings of confidence to care for children supported by complex, medical technologies were transformed to an objective scale defined by logits (N=70). Transparent linear units from this transformation provided foundational insights into measurement properties of a social- humanistic caregiving construct, which clarified physical and social caregiver implications. Parameterized items and ratings were also subjected to multivariate hierarchical analysis, then decomposed to demonstrate theoretical coherence (R2 >.50), which provided further support for convergence of mathematical parameterization, physical expectations, and a social-humanistic construct. These results present substantial support for improving integration of social sciences with contemporary scientific research programs by emphasizing construction of common variables with objective, linear units.

Variable slew-rate spiral design: theory and application to peak B(1) amplitude reduction in 2D RF pulse design.

PubMed

Xu, Dan; King, Kevin F; Liang, Zhi-Pei

2007-10-01

A new class of spiral trajectories called variable slew-rate spirals is proposed. The governing differential equations for a variable slew-rate spiral are derived, and both numeric and analytic solutions to the equations are given. The primary application of variable slew-rate spirals is peak B(1) amplitude reduction in 2D RF pulse design. The reduction of peak B(1) amplitude is achieved by changing the gradient slew-rate profile, and gradient amplitude and slew-rate constraints are inherently satisfied by the design of variable slew-rate spiral gradient waveforms. A design example of 2D RF pulses is given, which shows that under the same hardware constraints the RF pulse using a properly chosen variable slew-rate spiral trajectory can be much shorter than that using a conventional constant slew-rate spiral trajectory, thus having greater immunity to resonance frequency offsets.

Long-range non-contact imaging photoplethysmography: cardiac pulse wave sensing at a distance

NASA Astrophysics Data System (ADS)

Blackford, Ethan B.; Estepp, Justin R.; Piasecki, Alyssa M.; Bowers, Margaret A.; Klosterman, Samantha L.

2016-03-01

Non-contact, imaging photoplethysmography uses photo-optical sensors to measure variations in light absorption, caused by blood volume pulsations, to assess cardiopulmonary parameters including pulse rate, pulse rate variability, and respiration rate. Recently, researchers have studied the applications and methodology of imaging photoplethysmography. Basic research has examined some of the variables affecting data quality and accuracy of imaging photoplethysmography including signal processing, imager parameters (e.g. frame rate and resolution), lighting conditions, subject motion, and subject skin tone. This technology may be beneficial for long term or continuous monitoring where contact measurements may be harmful (e.g. skin sensitivities) or where imperceptible or unobtrusive measurements are desirable. Using previously validated signal processing methods, we examined the effects of imager-to-subject distance on one-minute, windowed estimates of pulse rate. High-resolution video of 22, stationary participants was collected using an enthusiast-grade, mirrorless, digital camera equipped with a fully-manual, super-telephoto lens at distances of 25, 50, and 100 meters with simultaneous contact measurements of electrocardiography, and fingertip photoplethysmography. By comparison, previous studies have usually been conducted with imager-to-subject distances of up to only a few meters. Mean absolute error for one-minute, windowed, pulse rate estimates (compared to those derived from gold-standard electrocardiography) were 2.0, 4.1, and 10.9 beats per minute at distances of 25, 50, and 100 meters, respectively. Long-range imaging presents several unique challenges among which include decreased, observed light reflectance and smaller regions of interest. Nevertheless, these results demonstrate that accurate pulse rate measurements can be obtained from over long imager-to-participant distances given these constraints.

Atypical Reactivity of Heart Rate Variability to Stress and Depression: Systematic Review of the Literature and Directions for Future Research

PubMed Central

Hamilton, Jessica L.; Alloy, Lauren B.

2017-01-01

Heart rate variability has received growing attention in the depression literature, with several recent meta-analyses indicating that lower resting heart rate variability is associated with depression. However, the role of fluctuations in heart rate variability (or reactivity) in response to stress in depression remains less clear. The present review provides a systematic examination of the literature on heart rate variability reactivity to a laboratory-induced stressor task and depression, including 26 studies of reactivity in heart rate variability and clinical depression, remitted (or history of) depression, and subthreshold depression (or symptom-level depression) among adults, adolescents, and children. In addition to reviewing the findings of these studies, methodological considerations and conceptual gaps in the literature are addressed. We conclude by highlighting the importance of investigating the potential transactional relationship between heart rate variability reactivity and depression and possible mechanisms underlying this relationship. PMID:27697746

FCA Group LLC Request for GHG Credit for Variable Crankcase Suction Valve Technology in Denso AC Compressors

EPA Pesticide Factsheets

FCA Group LLC request to the EPA regarding greenhouse (GHG) off-cycle credit for the use of the Denso SAS AC compressor with variable crankcase suction valve technology beginning with the 2019 MY Ram pickup truck.

Testing of technology readiness index model based on exploratory factor analysis approach

NASA Astrophysics Data System (ADS)

Ariani, AF; Napitupulu, D.; Jati, RK; Kadar, JA; Syafrullah, M.

2018-04-01

SMEs readiness in using ICT will determine the adoption of ICT in the future. This study aims to evaluate the model of technology readiness in order to apply the technology on SMEs. The model is tested to find if TRI model is relevant to measure ICT adoption, especially for SMEs in Indonesia. The research method used in this paper is survey to a group of SMEs in South Tangerang. The survey measures the readiness to adopt ICT based on four variables which is Optimism, Innovativeness, Discomfort, and Insecurity. Each variable contains several indicators to make sure the variable is measured thoroughly. The data collected through survey is analysed using factor analysis methodwith the help of SPSS software. The result of this study shows that TRI model gives more descendants on some indicators and variables. This result can be caused by SMEs owners’ knowledge is not homogeneous about either the technology that they are used, knowledge or the type of their business.

Air velocity distributions inside tree canopies from a variable-rate air-assisted sprayer

USDA-ARS?s Scientific Manuscript database

A variable-rate, air assisted, five-port sprayer had been in development to achieve variable discharge rates of both liquid and air. To verify the variable air rate capability by changing the fan inlet diameter of the sprayer, air jet velocities impeded by plant canopies were measured at various loc...

Conventional heart rate variability analysis of ambulatory electrocardiographic recordings fails to predict imminent ventricular fibrillation

NASA Technical Reports Server (NTRS)

Vybiral, T.; Glaeser, D. H.; Goldberger, A. L.; Rigney, D. R.; Hess, K. R.; Mietus, J.; Skinner, J. E.; Francis, M.; Pratt, C. M.

1993-01-01

OBJECTIVES. The purpose of this report was to study heart rate variability in Holter recordings of patients who experienced ventricular fibrillation during the recording. BACKGROUND. Decreased heart rate variability is recognized as a long-term predictor of overall and arrhythmic death after myocardial infarction. It was therefore postulated that heart rate variability would be lowest when measured immediately before ventricular fibrillation. METHODS. Conventional indexes of heart rate variability were calculated from Holter recordings of 24 patients with structural heart disease who had ventricular fibrillation during monitoring. The control group consisted of 19 patients with coronary artery disease, of comparable age and left ventricular ejection fraction, who had nonsustained ventricular tachycardia but no ventricular fibrillation. RESULTS. Heart rate variability did not differ between the two groups, and no consistent trends in heart rate variability were observed before ventricular fibrillation occurred. CONCLUSIONS. Although conventional heart rate variability is an independent long-term predictor of adverse outcome after myocardial infarction, its clinical utility as a short-term predictor of life-threatening arrhythmias remains to be elucidated.

Accelerated acidosis in response to variable fetal heart rate decelerations in chronically hypoxic ovine fetuses.

PubMed

Amaya, Kevin E; Matushewski, Brad; Durosier, L Daniel; Frasch, Martin G; Richardson, Bryan S; Ross, Michael G

2016-02-01

Due to limitations of technology, clinicians are typically unable to determine if human fetuses are normoxic or moderately, chronically hypoxic. Risk factors for chronic hypoxia include fetal growth restriction, which is associated with an increased incidence of oligohydramnios and thus a risk for umbilical cord occlusion (UCO) and variable fetal heart rate (FHR) decelerations. At delivery, fetal growth restriction infants (<3rd percentile) have nearly twice the incidence of low Apgar scores and umbilical pH <7.0. Despite the risks of oligohydramnios and intermittent UCO, there is little understanding of the acid/base responses rates of chronically hypoxic fetuses to variable FHR decelerations as might occur during human labor. We sought to compare the increase in base deficit (BD) among chronically hypoxic as compared to normoxic ovine fetuses in response to simulated mild, moderate, and severe variable FHR decelerations. Near-term ovine fetuses were chronically prepared with brachial artery catheters and an inflatable umbilical cuff occluder. Following a recovery period, normoxic (n = 9) and spontaneously hypoxic (n = 5) fetuses were identified (arterial O2 saturation ≤55%). Both animal groups underwent graded, 1-minute occlusions every 2.5 minutes with 1 hour of mild (∼30 beats/min [bpm] decrease from baseline), 1 hour of moderate (∼60 bpm decrease from baseline), and up to 2 hours of severe (∼90 bpm decrease from baseline) variable FHR decelerations until fetal arterial pH reached 7.00, when occlusions were stopped. Repetitive UCO resulted in development of acidosis (pH <7.0) in both groups. Hypoxic and normoxic fetuses demonstrated similar BD increases in response to both mild (0.39, interquartile range [IQR] 0.28-0.45 vs 0.26, IQR 0.01-0.30 mEq/L/10 min, P = .25) and severe (1.97, IQR 1.50-2.43 vs 1.51, IQR 0.97-2.45 mEq/L/10 min, P = .63) variable decelerations. However, moderate variable decelerations increased BD in hypoxic fetuses at 2.5 times the rate of normoxic fetuses (0.97, IQR 0.52-1.72 vs 0.39, IQR 0.23-0.47 mEq/L/10 min, P = .03). During the recovery period, hypoxic fetuses cleared BD slower than normoxic fetuses (0.08 ± 0.02 vs 0.12 ± 0.03 mEq/L/min, P = .02). In comparison to normoxic fetuses, hypoxic fetuses can more rapidly progress to significant metabolic acidosis in response to moderate FHR variable decelerations, and more slowly recover with in utero resuscitation, likely a consequence of impaired placental function and fetal physiologic responses. Copyright © 2016 Elsevier Inc. All rights reserved.

The role of precision agriculture for improved nutrient management on farms.

PubMed

Hedley, Carolyn

2015-01-01

Precision agriculture uses proximal and remote sensor surveys to delineate and monitor within-field variations in soil and crop attributes, guiding variable rate control of inputs, so that in-season management can be responsive, e.g. matching strategic nitrogen fertiliser application to site-specific field conditions. It has the potential to improve production and nutrient use efficiency, ensuring that nutrients do not leach from or accumulate in excessive concentrations in parts of the field, which creates environmental problems. The discipline emerged in the 1980s with the advent of affordable geographic positioning systems (GPS), and has further developed with access to an array of affordable soil and crop sensors, improved computer power and software, and equipment with precision application control, e.g. variable rate fertiliser and irrigation systems. Precision agriculture focusses on improving nutrient use efficiency at the appropriate scale requiring (1) appropriate decision support systems (e.g. digital prescription maps), and (2) equipment capable of varying application at these different scales, e.g. the footprint of a one-irrigation sprinkler or a fertiliser top-dressing aircraft. This article reviews the rapid development of this discipline, and uses New Zealand as a case study example, as it is a country where agriculture drives economic growth. Here, the high yield potentials on often young, variable soils provide opportunities for effective financial return from investment in these new technologies. © 2014 Society of Chemical Industry.

Learning curve analysis of mitral valve repair using telemanipulative technology.

PubMed

Charland, Patrick J; Robbins, Tom; Rodriguez, Evilio; Nifong, Wiley L; Chitwood, Randolph W

2011-08-01

To determine if the time required to perform mitral valve repairs using telemanipulation technology decreases with experience and how that decrease is influenced by patient and procedure variables. A single-center retrospective review was conducted using perioperative and outcomes data collected contemporaneously on 458 mitral valve repair surgeries using telemanipulative technology. A regression model was constructed to assess learning with this technology and predict total robot time using multiple predictive variables. Statistical analysis was used to determine if models were significantly useful, to rule out correlation between predictor variables, and to identify terms that did not contribute to the prediction of total robot time. We found a statistically significant learning curve (P < .01). The institutional learning percentage∗ derived from total robot times† for the first 458 recorded cases of mitral valve repair using telemanipulative technology is 95% (R(2) = .40). More than one third of the variability in total robot time can be explained through our model using the following variables: type of repair (chordal procedures, ablations, and leaflet resections), band size, use of clips alone in band implantation, and the presence of a fellow at bedside (P < .01). Learning in mitral valve repair surgery using telemanipulative technology occurs at the East Carolina Heart Institute according to a logarithmic curve, with a learning percentage of 95%. From our regression output, we can make an approximate prediction of total robot time using an additive model. These metrics can be used by programs for benchmarking to manage the implementation of this new technology, as well as for capacity planning, scheduling, and capital budget analysis. Copyright © 2011 The American Association for Thoracic Surgery. All rights reserved.

Variable polarity arc welding

NASA Technical Reports Server (NTRS)

Bayless, E. O., Jr.

1991-01-01

Technological advances generate within themselves dissatisfactions that lead to further advances in a process. A series of advances in welding technology which culminated in the Variable Polarity Plasma Arc (VPPA) Welding Process and an advance instituted to overcome the latest dissatisfactions with the process: automated VPPA welding are described briefly.

The theory and method of variable frequency directional seismic wave under the complex geologic conditions

NASA Astrophysics Data System (ADS)

Jiang, T.; Yue, Y.

2017-12-01

It is well known that the mono-frequency directional seismic wave technology can concentrate seismic waves into a beam. However, little work on the method and effect of variable frequency directional seismic wave under complex geological conditions have been done .We studied the variable frequency directional wave theory in several aspects. Firstly, we studied the relation between directional parameters and the direction of the main beam. Secondly, we analyzed the parameters that affect the beam width of main beam significantly, such as spacing of vibrator, wavelet dominant frequency, and number of vibrator. In addition, we will study different characteristics of variable frequency directional seismic wave in typical velocity models. In order to examine the propagation characteristics of directional seismic wave, we designed appropriate parameters according to the character of direction parameters, which is capable to enhance the energy of the main beam direction. Further study on directional seismic wave was discussed in the viewpoint of power spectral. The results indicate that the energy intensity of main beam direction increased 2 to 6 times for a multi-ore body velocity model. It showed us that the variable frequency directional seismic technology provided an effective way to strengthen the target signals under complex geological conditions. For concave interface model, we introduced complicated directional seismic technology which supports multiple main beams to obtain high quality data. Finally, we applied the 9-element variable frequency directional seismic wave technology to process the raw data acquired in a oil-shale exploration area. The results show that the depth of exploration increased 4 times with directional seismic wave method. Based on the above analysis, we draw the conclusion that the variable frequency directional seismic wave technology can improve the target signals of different geologic conditions and increase exploration depth with little cost. Due to inconvenience of hydraulic vibrators in complicated surface area, we suggest that the combination of high frequency portable vibrator and variable frequency directional seismic wave method is an alternative technology to increase depth of exploration or prospecting.

Smart Energy Cryo-refrigerator Technology for the next generation Very Large Array

NASA Astrophysics Data System (ADS)

Spagna, Stefano

2018-01-01

We describe a “smart energy” cryocooler technology architecture for the next generation Very Large Array that makes use of multiple variable frequency cold heads driven from a single variable speed air cooled compressor. Preliminary experiments indicate that the compressor variable flow control, advanced diagnostics, and the cryo-refrigerator low vibration, provide a unique energy efficient capability for the very large number of antennas that will be employed in this array.

A systematic review of patient acceptance of consumer health information technology.

PubMed

Or, Calvin K L; Karsh, Ben-Tzion

2009-01-01

A systematic literature review was performed to identify variables promoting consumer health information technology (CHIT) acceptance among patients. The electronic bibliographic databases Web of Science, Business Source Elite, CINAHL, Communication and Mass Media Complete, MEDLINE, PsycArticles, and PsycInfo were searched. A cited reference search of articles meeting the inclusion criteria was also conducted to reduce misses. Fifty-two articles met the selection criteria. Among them, 94 different variables were tested for associations with acceptance. Most of those tested (71%) were patient factors, including sociodemographic characteristics, health- and treatment-related variables, and prior experience or exposure to computer/health technology. Only ten variables were related to human-technology interaction; 16 were organizational factors; and one was related to the environment. In total, 62 (66%) were found to predict acceptance in at least one study. Existing literature focused largely on patient-related factors. No studies examined the impact of social and task factors on acceptance, and few tested the effects of organizational or environmental factors on acceptance. Future research guided by technology acceptance theories should fill those gaps to improve our understanding of patient CHIT acceptance, which in turn could lead to better CHIT design and implementation.

Social Cognitive Predictors of Pre-Service Teachers' Technology Integration Performance

ERIC Educational Resources Information Center

Perkmen, Serkan; Pamuk, Sonmez

2011-01-01

The main objective of the study was to examine interrelationships among social cognitive variables (self-efficacy, outcome expectations, and performance goals) and their role in predicting pre-service teachers' technology integration performance. Although researchers have examined the role of these variables in the teacher-education context, the…

Comparison of TID Effects in Space-Like Variable Dose Rates and Constant Dose Rates

NASA Technical Reports Server (NTRS)

Harris, Richard D.; McClure, Steven S.; Rax, Bernard G.; Evans, Robin W.; Jun, Insoo

2008-01-01

The degradation of the LM193 dual voltage comparator has been studied at different TID dose rate profiles, including several different constant dose rates and a variable dose rate that simulates the behavior of a solar flare. A comparison of results following constant dose rate vs. variable dose rates is made to explore how well the constant dose rates used for typical part testing predict the performance during a simulated space-like mission. Testing at a constant dose rate equal to the lowest dose rate seen during the simulated flare provides an extremely conservative estimate of the overall amount of degradation. A constant dose rate equal to the average dose rate is also more conservative than the variable rate. It appears that, for this part, weighting the dose rates by the amount of total dose received at each rate (rather than the amount of time at each dose rate) results in an average rate that produces an amount of degradation that is a reasonable approximation to that received by the variable rate.

13 CFR 120.214 - What conditions apply for variable interest rates?

Code of Federal Regulations, 2010 CFR

2010-01-01

... interest rates? 120.214 Section 120.214 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Policies Specific to 7(a) Loans Maturities; Interest Rates; Loan and Guarantee Amounts § 120.214 What conditions apply for variable interest rates? A Lender may use a variable rate of interest...

Testing of an Annular Linear Induction Pump for the Fission Surface Power Technology Demonstration Unit

NASA Technical Reports Server (NTRS)

Polzin, K. A.; Pearson, J. B.; Webster, K.; Godfoy, T. J.; Bossard, J. A.

2013-01-01

Results of performance testing of an annular linear induction pump that has been designed for integration into a fission surface power technology demonstration unit are presented. The pump electromagnetically pushes liquid metal (NaK) through a specially-designed apparatus that permits quantification of pump performance over a range of operating conditions. Testing was conducted for frequencies of 40, 55, and 70 Hz, liquid metal temperatures of 125, 325, and 525 C, and input voltages from 30 to 120 V. Pump performance spanned a range of flow rates from roughly 0.3 to 3.1 L/s (4.8 to 49 gpm), and pressure heads of <1 to 104 kPa (<0.15 to 15 psi). The maximum efficiency measured during testing was 5.4%. At the technology demonstration unit operating temperature of 525 C the pump operated over a narrower envelope, with flow rates from 0.3 to 2.75 L/s (4.8 to 43.6 gpm), developed pressure heads from <1 to 55 kPa (<0.15 to 8 psi), and a maximum efficiency of 3.5%. The pump was supplied with three-phase power at 40 and 55 Hz using a variable-frequency motor drive, while power at 55 and 70 Hz was supplied using a variable-frequency power supply. Measured performance of the pump at 55 Hz using either supply exhibited good quantitative agreement. For a given temperature, the peak in efficiency occurred at different flow rates as the frequency was changed, but the maximum value of efficiency was relative insensitive within 0.3% over the frequency range tested, including a scan from 45 to 78 Hz. The objectives of the FSP technology project are as follows:5 • Develop FSP concepts that meet expected surface power requirements at reasonable cost with added benefits over other options. • Establish a nonnuclear hardware-based technical foundation for FSP design concepts to reduce overall development risk. • Reduce the cost uncertainties for FSP and establish greater credibility for flight system cost estimates. • Generate the key nonnuclear products to allow Agency decision makers to consider FSP as a viable option for potential future flight development. The pump must be compatible with the liquid NaK coolant and have adequate performance to enable a viable flight system. Idaho National Laboratory (INL) was tasked with the design and fabrication of an ALIP suitable for the FSP reference mission. Under the program, a quarter-scale FSP technology demonstration is under construction to test the end-to-end conversion of simulated nuclear thermal power to usable electrical power intended to raise the entire FSP system to Technology Readiness Level 6. An ALIP for this TDU was fabricated under the direction of the INL and shipped to NASA Marshall Space Flight Center (MSFC) for testing at representative operating conditions. This pump was designed to meet the requirements of the TDU experiment. The ALIP test circuit (ATC) at MSFC, previously used to conduct performance evaluation on another ALIP6 was used to test the present TDU pump for the FSP Technology Development program.

Swiss and Turkish Pre-Service Science Teachers' Anxiety Levels for Educational Technology

ERIC Educational Resources Information Center

Efe, Hulya Aslan; Efe, Rifat

2016-01-01

This study aims to culturally explain pre-service science teachers' instructional technology-related anxiety levels by analyzing the variables of their instructional technology using experiences, frequency of using instructional technologies, access to instructional technologies, instructional technology-related attitude and their instructional…

The implications of renewable energy research and development: Policy scenario analysis with experience and learning effects

NASA Astrophysics Data System (ADS)

Kobos, Peter Holmes

This dissertation analyzes the current and potential future costs of renewable energy technology from an institutional perspective. The central hypothesis is that reliable technology cost forecasting can be achieved through standard and modified experience curves implemented in a dynamic simulation model. Additionally, drawing upon region-specific institutional lessons highlights the role of market, social, and political institutions throughout an economy. Socio-political influences and government policy pathways drive resource allocation decisions that may be predominately influenced by factors other than those considered in a traditional market-driven, mechanistic approach. Learning in economic systems as a research topic is an attractive complement to the notion of institutional pathways. The economic implications of learning by doing, as first outlined by Arrow (1962), highlight decreasing production costs as individuals, or more generally the firm, become more familiar with a production process. The standard approach in the literature has been to employ a common experience curve where cumulative production is the only independent variable affecting costs. This dissertation develops a two factor experience curve, adding research, development and demonstration (RD&D) expenditures as a second variable. To illustrate the concept in the context of energy planning, two factor experience curves are developed for wind energy technology and solar photovoltaic (PV) modules under different assumptions on learning rates for cumulative capacity and the knowledge stock (a function of past RD&D efforts). Additionally, a one factor experience curve and cost trajectory scenarios are developed for concentrated solar power and geothermal energy technology, respectively. Cost forecasts are then developed for all four of these technologies in a dynamic simulation model. Combining the theoretical framework of learning by doing with the fields of organizational learning and institutional economics, this dissertation argues that the current state of renewable energy technology costs is largely due to the past production efforts (learning by doing) and RD&D efforts (learning by searching) in these global industries. This cost pathway, however, may be altered through several policy process feedback mechanisms including targeted RD&D expenditures, maintenance of RD&D to promote learning effects, and financial incentive programs that support energy production from renewable energy technologies.

Technological variability during the Early Middle Palaeolithic in Western Europe. Reduction systems and predetermined products at the Bau de l'Aubesier and Payre (South-East France)

PubMed Central

Carmignani, Leonardo; Fernandes, Paul; Wilson, Lucy

2017-01-01

The study of the lithic assemblages of two French sites, the Bau de l’Aubesier and Payre, contributes new knowledge of the earliest Neanderthal techno-cultural variability. In this paper we present the results of a detailed technological analysis of Early Middle Palaeolithic lithic assemblages of MIS 8 and 7 age from the two sites, which are located on opposite sides of the Rhône Valley in the south-east of France. The MIS 9–7 period is considered in Europe to be a time of new behaviours, especially concerning lithic strategies. The shift from the Lower Palaeolithic to the Early Middle Palaeolithic is “classically” defined by an increase in the number of core technologies, including standardized ones, which are stabilized in the full Middle Palaeolithic (MIS 5–3), associated with the decline of the “Acheulean” biface. Applying a common technological approach to the analysis of the two assemblages highlights their technological variability with respect to reduction systems and end products. Differences between Payre and the Bau de l’Aubesier concerning raw material procurement and faunal exploitation only partially explain this multifaceted technological variability, which in our opinion also reflects the existence of distinct technological strategies within the same restricted geographic area, which are related to distinct traditions, site uses, and/or as yet unknown parameters. PMID:28591159

Effect of pulsed corona discharge voltage and feed gas flow rate on dissolved ozone concentration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prasetyaningrum, A., E-mail: ajiprasetyaningrum@gmail.com; Ratnawati,; Jos, B.

Ozonization is one of the methods extensively used for water purification and degradation of organic materials. Ozone (O{sub 3}) is recognized as a powerful oxidizing agent. Due to its strong oxidability and better environmental friendless, ozone increasing being used in domestic and industrial applications. Current technology in ozone production utilizes several techniques (corona discharge, ultra violet radiation and electrolysis). This experiment aimed to evaluating effect of voltage and gas flow rate on ozone production with corona discharge. The system consists of two net-type stainless steel electrode placed in a dielectric barrier. Three pulsed voltage (20, 30, 40 KV) and flowmore » rate (5, 10, 15 L/min) were prepare for operation variable at high frequency (3.7 kHz) with AC pulsed power supply. The dissolved ozone concentration depends on the applied high-voltage level, gas flow rate and the discharge exposure duration. The ozone concentration increases with decreasing gas flow rate. Dissolved ozone concentrations greater than 200 ppm can be obtained with a minimum voltage 40 kV.« less

Effect of pulsed corona discharge voltage and feed gas flow rate on dissolved ozone concentration

NASA Astrophysics Data System (ADS)

Prasetyaningrum, A.; Ratnawati, Jos, B.

2015-12-01

Ozonization is one of the methods extensively used for water purification and degradation of organic materials. Ozone (O3) is recognized as a powerful oxidizing agent. Due to its strong oxidability and better environmental friendless, ozone increasing being used in domestic and industrial applications. Current technology in ozone production utilizes several techniques (corona discharge, ultra violet radiation and electrolysis). This experiment aimed to evaluating effect of voltage and gas flow rate on ozone production with corona discharge. The system consists of two net-type stainless steel electrode placed in a dielectric barrier. Three pulsed voltage (20, 30, 40 KV) and flow rate (5, 10, 15 L/min) were prepare for operation variable at high frequency (3.7 kHz) with AC pulsed power supply. The dissolved ozone concentration depends on the applied high-voltage level, gas flow rate and the discharge exposure duration. The ozone concentration increases with decreasing gas flow rate. Dissolved ozone concentrations greater than 200 ppm can be obtained with a minimum voltage 40 kV.

Research of interaction between technological and material parameters during densification of sunflower hulls

NASA Astrophysics Data System (ADS)

Križan, Peter; Matúš, Miloš; Beniak, Juraj; Šooš, Ľubomír

2018-01-01

During the biomass densification can be recognized various technological variables and also material parameters which significantly influences the final solid biofuels (pellets) quality. In this paper, we will present the research findings concerning relationships between technological and material variables during densification of sunflower hulls. Sunflower hulls as an unused source is a typical product of agricultural industry in Slovakia and belongs to the group of herbaceous biomass. The main goal of presented experimental research is to determine the impact of compression pressure, compression temperature and material particle size distribution on final biofuels quality. Experimental research described in this paper was realized by single-axis densification, which was represented by experimental pressing stand. The impact of mentioned investigated variables on the final briquettes density and briquettes dilatation was determined. Mutual interactions of these variables on final briquettes quality are showing the importance of mentioned variables during the densification process. Impact of raw material particle size distribution on final biofuels quality was also proven by experimental research on semi-production pelleting plant.

Is 50 Hz high enough ECG sampling frequency for accurate HRV analysis?

PubMed

Mahdiani, Shadi; Jeyhani, Vala; Peltokangas, Mikko; Vehkaoja, Antti

2015-01-01

With the worldwide growth of mobile wireless technologies, healthcare services can be provided at anytime and anywhere. Usage of wearable wireless physiological monitoring system has been extensively increasing during the last decade. These mobile devices can continuously measure e.g. the heart activity and wirelessly transfer the data to the mobile phone of the patient. One of the significant restrictions for these devices is usage of energy, which leads to requiring low sampling rate. This article is presented in order to investigate the lowest adequate sampling frequency of ECG signal, for achieving accurate enough time domain heart rate variability (HRV) parameters. For this purpose the ECG signals originally measured with high 5 kHz sampling rate were down-sampled to simulate the measurement with lower sampling rate. Down-sampling loses information, decreases temporal accuracy, which was then restored by interpolating the signals to their original sampling rates. The HRV parameters obtained from the ECG signals with lower sampling rates were compared. The results represent that even when the sampling rate of ECG signal is equal to 50 Hz, the HRV parameters are almost accurate with a reasonable error.

Individual variability and environmental characteristics influence older adults' abilities to manage everyday technology.

PubMed

Malinowsky, Camilla; Almkvist, Ove; Nygård, Louise; Kottorp, Anders

2012-03-01

The ability to manage everyday technology (ET), such as computers and microwave ovens, is increasingly required in the performance of everyday activities and participation in society. This study aimed to identify aspects that influence the ability to manage ET among older adults with and without cognitive impairment. Older adults with mild Alzheimer's disease and mild cognitive impairment and without known cognitive impairment were assessed as they managed their ET at home. Data were collected using the Management of Everyday Technology Assessment (META). Rasch-based measures of the person's ability to manage ET were analyzed. These measures were used as dependent variables in backward procedure ANOVA analyses. Different predefined aspects that could influence the ability to manage ET were used as independent variables. Three aspects had a significant effect upon the ability to manage ET. These were: (1) variability in intrapersonal capacities (such as "the capacity to pay attention and focus", (2) environmental characteristics (such as "the impact of the design") and (3) diagnostic group. Variability in intrapersonal capacities seems to be of more importance than the actual level of intrapersonal capacity in relation to the ability to manage ET for this sample. This implies that investigations of ability to manage ET should also include intraperson variability. Additionally, adaptations in environmental characteristics could simplify the management of ET to support older adults as technology users.

The economic impact of NASA R and D spending Appendices

NASA Technical Reports Server (NTRS)

Evans, M. K.

1976-01-01

Seven appendices related to a previous report on the economic impact of NASA R and D spending were presented. They dealt with: (1) theoretical and empirical development of aggregate production functions, (2) the calculation of the time series for the rate of technological progress, (3) the calculation of the industry mix variable, (4) the estimation of distributed lags, (5) the estimation of the equations for gamma, (6) a ten-year forecast of the U.S. economy, (7) simulations of the macroeconomic model for increases in NASA R and D spending of $1.0, $.0.5, and 0.1 billions.

PBO Integrated Real-Time Observing Sites at Volcanic Sites

NASA Astrophysics Data System (ADS)

Mencin, D.; Jackson, M.; Borsa, A.; Feaux, K.; Smith, S.

2009-05-01

The Plate Boundary Observatory, an element of NSF's EarthScope program, has six integrated observatories in Yellowstone and four on Mt St Helens. These observatories consist of some combination of borehole strainmeters, borehole seismometers, GPS, tiltmeters, pore pressure, thermal measurements and meteorological data. Data from all these instruments have highly variable data rates and formats, all synchronized to GPS time which can cause significant congestion of precious communication resources. PBO has been experimenting with integrating these data streams to both maximize efficiency and minimize latency through the use of software that combines the streams, like Antelope, and VPN technologies.

On-line removal of volatile fatty acids from CELSS anaerobic bioreactor via nanofiltration

NASA Technical Reports Server (NTRS)

Colon, Guillermo

1995-01-01

The CELSS (controlled ecological life support system) resource recovery system, which is a waste processing system, uses aerobic and anaerobic bioreactors to recover plants nutrients and secondary foods from the inedible biomass. The anaerobic degradation of the inedible biomass by means of culture of rumen bacteria,generates organic compounds such as volatile fatty acids (acetic, propionic, butyric, VFA) and ammonia. The presence of VFA in the bioreactor medium at fairly low concentrations decreases the microbial population's metabolic reactions due to end-product inhibition. Technologies to remove VFA continuously from the bioreactor are of high interest. Several candidate technologies were analyzed, such as organic solvent liquid-liquid extraction, adsorption and/or ion exchange, dialysis, electrodialysis, and pressure driven membrane separation processes. The proposed technique for the on-line removal of VFA from the anaerobic bioreactor was a nanofiltration membrane recycle bioreactor. In order to establish the nanofiltration process performance variables before coupling it to the bioreactor, a series of experiments were carried out using a 10,000 MWCO tubular ceramic membrane module. The variables studied were the bioreactor slurry permeation characteristics, such as, the permeate flux, VFA and the nutrient removal rates as a function of applied transmembrane pressure, fluid recirculation velocity, suspended matter concentration, and process operating time. Results indicate that the permeate flux, VFA and nutrients removal rates are directly proportional to the fluid recirculation velocity in the range between 0.6 to 1.0 m/s, applied pressure when these are low than 1.5 bar, and inversely proportional to the total suspended solids concentration in the range between 23,466 to 34,880. At applied pressure higher than 1.5 bar the flux is not more linearly dependent due to concentration polarization and fouling effects over the membrange surface. It was also found that the permeate flux declines rapidly during the first 5 to 8 hours, and then levels off with a diminishing rate of flux decay.

Nuclear-Renewable Hybrid Energy Systems: 2016 Technology Development Program Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bragg-Sitton, Shannon M.; Boardman, Richard; Rabiti, Cristian

The United States is in the midst of an energy revolution, spurred by advancement of technology to produce unprecedented supplies of oil and natural gas. Simultaneously, there is an increasing concern for climate change attributed to greenhouse gas (GHG) emissions that, in large part, result from burning fossil fuels. An international consensus has concluded that the U.S. and other developed nations have an imperative to reduce GHG emissions to address these climate change concerns. The global desire to reduce GHG emissions has led to the development and deployment of clean energy resources and technologies, particularly renewable energy technologies, at amore » rapid rate. At the same time, each of the major energy sectors—the electric grid, industrial manufacturing, transportation, and the residential/commercial consumers— is increasingly becoming linked through information and communications technologies, advanced modeling and simulation, and controls. Coordination of clean energy generation technologies through integrated hybrid energy systems, as defined below, has the potential to further revolutionize energy services at the system level by coordinating the exchange of energy currency among the energy sectors in a manner that optimizes financial efficiency (including capital investments), maximizes thermodynamic efficiency (through best use of exergy, which is the potential to use the available energy in producing energy services), reduces environmental impacts when clean energy inputs are maximized, and provides resources for grid management. Rapid buildout of renewable technologies has been largely driven by local, state, and federal policies, such as renewable portfolio standards and production tax credits that incentivize investment in these generation sources. A foundational assumption within this program plan is that renewable technologies will continue to be major contributors to the future U.S. energy infrastructure. While increased use of clean renewable technologies will aid in achieving reduced GHG emissions, it also presents new challenges to grid management that must be addressed. These challenges primarily derive from the fundamental characteristics of variable renewable generators, such as wind and solar: non-dispatchability, variable production, and reduced electromechanical inertia. This document presents a preliminary research and development (R&D) plan for detailed dynamic simulation and analysis of nuclear-renewable hybrid energy systems (N-R HES), coupled with integrated energy system design, component development, and integrated systems testing. N-R HES are cooperatively-controlled systems that dynamically apportion thermal and/or electrical energy to provide responsive generation to the power grid.« less

Case studies on forecasting for innovative technologies: frequent revisions improve accuracy.

PubMed

Lerner, Jeffrey C; Robertson, Diane C; Goldstein, Sara M

2015-02-01

Health technology forecasting is designed to provide reliable predictions about costs, utilization, diffusion, and other market realities before the technologies enter routine clinical use. In this article we address three questions central to forecasting's usefulness: Are early forecasts sufficiently accurate to help providers acquire the most promising technology and payers to set effective coverage policies? What variables contribute to inaccurate forecasts? How can forecasters manage the variables to improve accuracy? We analyzed forecasts published between 2007 and 2010 by the ECRI Institute on four technologies: single-room proton beam radiation therapy for various cancers; digital breast tomosynthesis imaging technology for breast cancer screening; transcatheter aortic valve replacement for serious heart valve disease; and minimally invasive robot-assisted surgery for various cancers. We then examined revised ECRI forecasts published in 2013 (digital breast tomosynthesis) and 2014 (the other three topics) to identify inaccuracies in the earlier forecasts and explore why they occurred. We found that five of twenty early predictions were inaccurate when compared with the updated forecasts. The inaccuracies pertained to two technologies that had more time-sensitive variables to consider. The case studies suggest that frequent revision of forecasts could improve accuracy, especially for complex technologies whose eventual use is governed by multiple interactive factors. Project HOPE—The People-to-People Health Foundation, Inc.

Multi-Objective Sliding Mode Control on Vehicle Cornering Stability with Variable Gear Ratio Actuator-Based Active Front Steering Systems.

PubMed

Ma, Xinbo; Wong, Pak Kin; Zhao, Jing; Xie, Zhengchao

2016-12-28

Active front steering (AFS) is an emerging technology to improve the vehicle cornering stability by introducing an additional small steering angle to the driver's input. This paper proposes an AFS system with a variable gear ratio steering (VGRS) actuator which is controlled by using the sliding mode control (SMC) strategy to improve the cornering stability of vehicles. In the design of an AFS system, different sensors are considered to measure the vehicle state, and the mechanism of the AFS system is also modelled in detail. Moreover, in order to improve the cornering stability of vehicles, two dependent objectives, namely sideslip angle and yaw rate, are considered together in the design of SMC strategy. By evaluating the cornering performance, Sine with Dwell and accident avoidance tests are conducted, and the simulation results indicate that the proposed SMC strategy is capable of improving the cornering stability of vehicles in practice.

Evaluation of continuous oxydesulfurization processes. Final technical report, September 1979-July 1981

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, J.F.; Wever, D.M.

1981-07-01

Three processes developed by Pittsburgh Energy Technology Center (PETC), Ledgemont Laboratories, and Ames Laboratories for the oxydesulfurization of coal were evaluated in continuous processing equipment designed, built, and/or adapted for the purpose at the DOE-owned Multi-Use Fuels and Energy Processes Test Plant (MEP) located at TRW's Capistrano Test Site in California. The three processes differed primarily in the chemical additives (none, sodium carbonate, or ammonia), fed to the 20% to 40% coal/water slurries, and in the oxygen content of the feed gas stream. Temperature, pressure, residence time, flow rates, slurry concentration and stirrer speed were the other primary independent variables.more » The amount of organic sulfur removed, total sulfur removed and the Btu recovery were the primary dependent variables. Evaluation of the data presented was not part of the test effort.« less

Notes on a Continuous-Variable Quantum Key Distribution Scheme

NASA Astrophysics Data System (ADS)

Ichikawa, Tsubasa; Hirano, Takuya; Matsubara, Takuto; Ono, Motoharu; Namiki, Ryo

2017-09-01

We develop a physical model to describe the signal transmission for a continuous-variable quantum key distribution scheme and investigate its security against a couple of eavesdropping attacks assuming that the eavesdropper's power is partly restricted owing to today's technological limitations. We consider an eavesdropper performing quantum optical homodyne measurement on the signal obtained by a type of beamsplitting attack. We also consider the case in which the eavesdropper Eve is unable to access a quantum memory and she performs heterodyne measurement on her signal without performing a delayed measurement. Our formulation includes a model in which the receiver's loss and noise are unaccessible by the eavesdropper. This setup enables us to investigate the condition that Eve uses a practical fiber differently from the usual beamsplitting attack where she can deploy a lossless transmission channel. The secret key rates are calculated in both the direct and reverse reconciliation scenarios.

Biomass Logistics

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. Richard Hess; Kevin L. Kenney; William A. Smith

Equipment manufacturers have made rapid improvements in biomass harvesting and handling equipment. These improvements have increased transportation and handling efficiencies due to higher biomass densities and reduced losses. Improvements in grinder efficiencies and capacity have reduced biomass grinding costs. Biomass collection efficiencies (the ratio of biomass collected to the amount available in the field) as high as 75% for crop residues and greater than 90% for perennial energy crops have also been demonstrated. However, as collection rates increase, the fraction of entrained soil in the biomass increases, and high biomass residue removal rates can violate agronomic sustainability limits. Advancements inmore » quantifying multi-factor sustainability limits to increase removal rate as guided by sustainable residue removal plans, and mitigating soil contamination through targeted removal rates based on soil type and residue type/fraction is allowing the use of new high efficiency harvesting equipment and methods. As another consideration, single pass harvesting and other technologies that improve harvesting costs cause biomass storage moisture management challenges, which challenges are further perturbed by annual variability in biomass moisture content. Monitoring, sampling, simulation, and analysis provide basis for moisture, time, and quality relationships in storage, which has allowed the development of moisture tolerant storage systems and best management processes that combine moisture content and time to accommodate baled storage of wet material based upon “shelf-life.” The key to improving biomass supply logistics costs has been developing the associated agronomic sustainability and biomass quality technologies and processes that allow the implementation of equipment engineering solutions.« less

Heart rate variability alterations in late life depression: A meta-analysis.

PubMed

Brown, Lydia; Karmakar, Chandan; Gray, Richard; Jindal, Ripu; Lim, Terrence; Bryant, Christina

2018-08-01

There is strong evidence for a bi-directional relationship between heart-health and depression in later life, but the physiological mechanisms underlying this relationship remain unclear. Heart rate variability is one promising factor that might help explain this relationship. We present results of a meta-analysis that considers heart rate variability alterations in older adults with depression. Literature search of Embase, PsychInfo and Medline revealed five clinical studies and six observational studies that examined the relationship between heart rate variability and depression in adults with a mean age over 60. These studies were included in this meta-analysis. Heart rate variability was reduced among older adults with clinical depression (N = 550), relative to healthy controls (Hedges' g = -0.334, 95%CI [-0.579, -0.090], p = .007). When high-frequency and low-frequency heart rate variability were investigated separately, only low-frequency heart rate variability was significantly reduced in depressed patients (Hedges' g = -0.626, 95%CI [-1.083, -0.169], p = .007). A similar but weaker pattern of results was found in the observational studies. Most findings remained significant among unmedicated depressed older adults. Evidence of effect-size heterogeneity was found in the clinical studies, indicating the need for more well-designed research in the area. Heart rate variability is reduced among older adults with depression, and this effect is not fully attributable to antidepressant medication use. Specifically, low-frequency heart rate variability may be reduced in depressed older adults. Heart rate variability warrants further attention, as it could help inform research into the prevention and treatment of depression in later life. Copyright © 2018 Elsevier B.V. All rights reserved.

ICT Integration of Turkish Teachers: An Analysis within TPACK-Practical Model

ERIC Educational Resources Information Center

Ay, Yusuf; Karadag, Engin; Acat, M. Bahaddin

2016-01-01

The aim of the study is to analyze Information and Communication Technologies (ICT) integration of Turkish teachers using various variables within the context of Technological Pedagogical Content Knowledge (TPACK). These variables were indicated as the gender of teachers, the implementation status of FATIH project at their schools, school types…

Variables Predicting Prospective Biology Teachers' Acceptance Perceptions Regarding Gene Technology

ERIC Educational Resources Information Center

Yilmaz, Mirac; Demirhan, Haydar

2014-01-01

The different opinions on products and applications of gene technology (GT) draw attention to the training and education activities related to GT. The purpose of this study is to review some variables predicting the acceptance perception regarding GT, and to investigate their changes at levels. The prospective teachers' subjective knowledge and…

Innovative Remote Sensors for Streamflow Measurement

NASA Astrophysics Data System (ADS)

Gourley, J. J.; Fulton, J. W.; Daniel, W.

2016-12-01

The United States Geological Survey operates and maintains over 7000 streamgages across the United States., Conventional streamgages have several important limitations: annual maintenance cost of approximately $15k makes gaging smaller basins uneconomical, manual updating of stage-discharge rating curves is inefficient and can be hazardous to operators, and instruments in contact with the water are sometimes damaged or lost during flood events. A suite of new, non-contact sensors is proposed to address these limitations and add new, previously unmeasured variables. First, a commercially available radar system has been fielded in a very dynamic stream environment and successfully used to measure stage height and stream velocity at high temporal resolution, on the order of a few minutes. Second, a custom water-penetrating lidar has been developed and demonstrated to map 1-D bathymetry (cross-section) in clear streams. Combined with stage and velocity measurements from the radar, this will allow for computation of discharge using non-contact methods without the need to update and maintain an empirical rating curve. Once mature, these technologies promise to reduce cost and manual intervention, allow proliferation of measurements to smaller streams, and introduce previously unmeasured variables to the hydrological scientist's toolbox.

The effect of lance geometry and carbon coating of silicon lances on propidium iodide uptake in lance array nanoinjection of HeLa 229 cells

NASA Astrophysics Data System (ADS)

Sessions, John W.; Lindstrom, Dallin L.; Hanks, Brad W.; Hope, Sandra; Jensen, Brian D.

2016-04-01

Connecting technology to biologic discovery is a core focus of non-viral gene therapy biotechnologies. One approach that leverages both the physical and electrical function of microelectromechanical systems (MEMS) in cellular engineering is a technology previously described as lance array nanoinjection (LAN). In brief, LAN consists of a silicon chip measuring 2 cm by 2 cm that has been etched to contain an array of 10 μm tall, solid lances that are spaced every 10 μm in a grid pattern. This array of lances is used to physically penetrate hundreds of thousands of cells simultaneously and to then electrically deliver molecular loads into cells. In this present work, two variables related to the microfabrication of the silicon lances, namely lance geometry and coating, are investigated. The purpose of both experimental variables is to assess these parameters’ effect on propidium iodide (PI), a cell membrane impermeable dye, uptake to injected HeLa 229 cells. For the lance geometry experimentation, three different microfabricated lance geometries were used which include a flat/narrow (FN, 1 μm diameter), flat/wide (FW, 2-2.5 μm diameter), and pointed (P, 1 μm diameter) lance geometries. From these tests, it was shown that the FN lances had a slightly better cell viability rate of 91.73% and that the P lances had the best PI uptake rate of 75.08%. For the lance coating experimentation, two different lances were fabricated, both silicon etched lances with some being carbon coated (CC) in a  <100 nm layer of carbon and the other lances being non-coated (Si). Results from this experiment showed no significant difference between lance types at three different nanoinjection protocols (0V, +1.5V DC, and  +5V Pulsed) for both cell viability and PI uptake rates. One exception to this is the comparison of CC/5V Pul and Si/5V Pul samples, where the CC/5V Pul samples had a cell viability rate 5% higher. Both outcomes were unexpected and reveal how to better optimize LAN parameters for future transfection experimentation.

Evaluation of Aqua-Ammonia Chiller Technologies and Field Site Installation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zaltash, Abdolreza

2007-09-01

The Naval Facilities Engineering Service Center (NFESC) has sponsored Oak Ridge National Laboratory (ORNL) to review, select, and evaluate advanced, gas-fired, 5-ton, aqua-ammonia, chiller technologies. The selection criteria was that units have COP values of 0.67 or better at Air-conditioning and Refrigeration Institute (ARI) 95 F outdoor rating conditions, an active refrigerant flow control, and a variable-speed condenser fan. These features are expected to allow these units to operate at higher ambient temperatures (up to the maximum operating temperature of 110 F) with minimal degradation in performance. ORNL evaluated three potential manufacturers of advanced, gas-fired, 5-ton, aqua-ammonia chillers-Robur, Ambian, andmore » Cooling Technologies. Unfortunately, Robur did not meet the COP requirements and Cooling Technologies could not deliver a unit to be tested at the U.S. Department of Energy (DOE)-ORNL environmental chamber testing facility for thermally activated heat pumps. This eliminated these two technologies from further consideration, leaving only the Ambian chillers for evaluation. Two Ambian chillers were evaluated at the DOE-ORNL test facility. Overall these chillers operated well over a wide range of ambient conditions with minimal degradation in performance due to several control strategies used such as a variable speed condenser fan, a modulating burner, and active refrigerant flow control. These Ambian pre-commercial units were selected for installation and field testing at three federal facilities. NFESC worked with ORNL to assist with the site selection for installation and evaluation of these chillers. Two sites (ORNL and Naval Surface Warfare Center [NSWC] Corona) had a single chiller unit installed; and at one site (Naval Amphibious Base [NAB] Little Creek), two 5-ton chillers linked together were installed to provide 10 tons of cooling. A chiller link controller developed under this project was evaluated in the field test at Little Creek.« less

Performance of Wide Operating Temperature Range Electrolytes in Quallion Prototype Li-Ion Cells

NASA Technical Reports Server (NTRS)

Smart, M. C.; Ratnakumar, B. V.; Tomcsi, M. R.; Nagata, M.; Visco, V.; Tsukamoto, H.

2010-01-01

For a number of applications, there is a continued interest in the development of rechargeable lithium-based batteries that can effectively operate over a wide temperature range (i.e., -40 to +70 deg C). These applications include powering future planetary rovers for NASA, enabling the next generation of automotive batteries for DOE, and supporting many DOD applications. Li-ion technology has been demonstrated to have good performance over a reasonably wide temperature range with many systems; however, there is still a desire to improve the low temperature rate capacity as well as the high temperature resilience. In the current study, we would like to present recent results obtained with prototype Li-Ion cells (manufactured by Quallion, LLC) which include various wide operating temperature range electrolytes developed by both JPL and Quallion. To demonstrate the viability of the technology, a number of performance tests were carried out, including: (a) discharge rate characterization over a wide temperature range (down to -60 deg C) using various rates (up to 20C rates), (b) discharge rate characterization at low temperatures with low temperature charging, (c) variable temperature cycling over a wide temperature range (-40 to +70 deg C), and (d) cycling at high temperature (50 deg C). As will be discussed, impressive rate capability was observed at low temperatures with many systems, as well as good resilience to high temperature cycling. To augment the performance testing on the prototype cells, a number of experimental three electrodes cells were fabricated (including Li reference electrodes) to allow the determination of the lithium kinetics of the respective electrodes and interfacial properties as a function of temperatures.

Variable conductance heat pipe technology

NASA Technical Reports Server (NTRS)

Marcus, B. D.; Edwards, D. K.; Anderson, W. T.

1973-01-01

Research and development programs in variable conductance heat pipe technology were conducted. The treatment has been comprehensive, involving theoretical and/or experimental studies in hydrostatics, hydrodynamics, heat transfer into and out of the pipe, fluid selection, and materials compatibility, in addition to the principal subject of variable conductance control techniques. Efforts were not limited to analytical work and laboratory experimentation, but extended to the development, fabrication and test of spacecraft hardware, culminating in the successful flight of the Ames Heat Pipe Experiment on the OAO-C spacecraft.

Using high-frequency nitrogen and carbon measurements to decouple temporal dynamics of catchment and in-stream transport and reaction processes in a headwater stream

NASA Astrophysics Data System (ADS)

Blaen, P.; Riml, J.; Khamis, K.; Krause, S.

2017-12-01

Within river catchments across the world, headwater streams represent important sites of nutrient transformation and uptake due to their high rates of microbial community processing and relative abundance in the landscape. However, separating the combined influence of in-stream transport and reaction processes from the overall catchment response can be difficult due to spatio-temporal variability in nutrient and organic matter inputs, flow regimes, and reaction rates. Recent developments in optical sensor technologies enable high-frequency, in situ nutrient measurements, and thus provide opportunities for greater insights into in-stream processes. Here, we use in-stream observations of hourly nitrate (NO3-N), dissolved organic carbon (DOC) and dissolved oxygen (DO) measurements from paired in situ sensors that bound a 1 km headwater stream reach in a mixed-use catchment in central England. We employ a spectral approach to decompose (1) variances in solute loading from the surrounding landscape, and (2) variances in reach-scale in-stream nutrient transport and reaction processes. In addition, we estimate continuous rates of reach-scale NO3-N and DOC assimilation/dissimilation, ecosystem respiration and primary production. Comparison of these results over a range of hydrological conditions (baseflow, variable storm events) and timescales (event-based, diel, seasonal) facilitates new insights into the physical and biogeochemical processes that drive in-stream nutrient dynamics in headwater streams.

Telemedicine for Facio-Scapulo-Humeral Muscular Dystrophy: A multidisciplinary approach to improve quality of life and reduce hospitalization rate?

PubMed

Portaro, Simona; Calabrò, Rocco Salvatore; Bramanti, Placido; Silvestri, Giuseppe; Torrisi, Michele; Conti-Nibali, Valeria; Caliri, Santina; Lunetta, Christian; Alagna, Bernardo; Naro, Antonino; Bramanti, Alessia

2018-04-01

Facio-Scapulo-Humeral Muscular Dystrophy (FSHD) is an autosomal dominant inherited disorder characterized by a variable and asymmetric involvement of facial, trunk, upper and lower extremity muscles. Although respiratory weakness is a relatively unknown feature of FSHD, it is not rare. Telemedicine has been used in a variety of health care fields, but only recently, with the advent of sophisticated technology, its interest among health professionals became evident, even in such diseases. To demonstrate the telemedicine efficacy in FSHD. Four siblings affected by a severe form of FSHD, living in a rural area far away from the referral center for neuromuscular diseases, who used a wheelchair, suffered from chronic respiratory failure and were provided with long-term non-invasive mechanical ventilation, received a 6-month period of telemedicine support. This consisted of video conferencing (respiratory physiotherapy, psychological support, neurological and pneumological assessment, nurse-coach supervision) and telemonitoring of cardiorespiratory variables (oxygen saturation, blood pressure, and heart rate). We performed 540 video conference sessions per patient, including three daily contacts with short monitoring oximetry measurements, blood pressure, and heart-rate measurements, psychological support, neurological and pneumological assessment, nurse-coach supervision. Our findings indicate that our telemedicine system was user-friendly, efficient for the home treatment of FSHD, and allowed reducing hospital admissions. Copyright © 2017 Elsevier Inc. All rights reserved.

A speech-controlled environmental control system for people with severe dysarthria.

PubMed

Hawley, Mark S; Enderby, Pam; Green, Phil; Cunningham, Stuart; Brownsell, Simon; Carmichael, James; Parker, Mark; Hatzis, Athanassios; O'Neill, Peter; Palmer, Rebecca

2007-06-01

Automatic speech recognition (ASR) can provide a rapid means of controlling electronic assistive technology. Off-the-shelf ASR systems function poorly for users with severe dysarthria because of the increased variability of their articulations. We have developed a limited vocabulary speaker dependent speech recognition application which has greater tolerance to variability of speech, coupled with a computerised training package which assists dysarthric speakers to improve the consistency of their vocalisations and provides more data for recogniser training. These applications, and their implementation as the interface for a speech-controlled environmental control system (ECS), are described. The results of field trials to evaluate the training program and the speech-controlled ECS are presented. The user-training phase increased the recognition rate from 88.5% to 95.4% (p<0.001). Recognition rates were good for people with even the most severe dysarthria in everyday usage in the home (mean word recognition rate 86.9%). Speech-controlled ECS were less accurate (mean task completion accuracy 78.6% versus 94.8%) but were faster to use than switch-scanning systems, even taking into account the need to repeat unsuccessful operations (mean task completion time 7.7s versus 16.9s, p<0.001). It is concluded that a speech-controlled ECS is a viable alternative to switch-scanning systems for some people with severe dysarthria and would lead, in many cases, to more efficient control of the home.

Remote Sensing Characterization of Two-dimensional Wave Forcing in the Surf Zone

NASA Astrophysics Data System (ADS)

Carini, R. J.; Chickadel, C. C.; Jessup, A. T.

2016-02-01

In the surf zone, breaking waves drive longshore currents, transport sediment, shape bathymetry, and enhance air-sea gas and particle exchange. Furthermore, wave group forcing influences the generation and duration of rip currents. Wave breaking exhibits large gradients in space and time, making it challenging to measure in situ. Remote sensing technologies, specifically thermal infrared (IR) imagery, can provide detailed spatial and temporal measurements of wave breaking at the water surface. We construct two-dimensional maps of active wave breaking from IR imagery collected during the Surf Zone Optics Experiment in September 2010 at the US Army Corps of Engineers' Field Research Facility in Duck, NC. For each breaker identified in the camera's field of view, the crest-perpendicular length of the aerated breaking region (roller length) and wave direction are estimated and used to compute the wave energy dissipation rate. The resultant dissipation rate maps are analyzed over different time scales: peak wave period, infragravity wave period, and tidal wave period. For each time scale, spatial maps of wave breaking are used to characterize wave forcing in the surf zone for a variety of wave conditions. The following phenomena are examined: (1) wave dissipation rates over the bar (location of most intense breaking) have increased variance in infragravity wave frequencies, which are different from the peak frequency of the incoming wave field and different from the wave forcing variability at the shoreline, and (2) wave forcing has a wider spatial distribution during low tide than during high tide due to depth-limited breaking over the barred bathymetry. Future work will investigate the response of the variability in wave setup, longshore currents and rip currents, to the variability in wave forcing in the surf zone.

Society of Flight Test Engineers, Annual Symposium, 21st, Garden Grove, CA, Aug. 6-10, 1990, Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-01-01

The present conference on flight testing encompasses avionics, flight-testing programs, technologies for flight-test predictions and measurements, testing tools, analysis methods, targeting techniques, and flightline testing. Specific issues addressed include flight testing of a digital terrain-following system, a digital Doppler rate-of-descent indicator, a high-technology testbed, a low-altitude air-refueling flight-test program, techniques for in-flight frequency-response testing for helicopters, limit-cycle oscillation and flight-flutter testing, and the research flight test of a scaled unmanned air vehicle. Also addressed are AV-8B V/STOL performance analysis, incorporating pilot-response time in failure-case testing, the development of pitot static flightline testing, targeting techniques for ground-based hover testing, a low-profilemore » microsensor for aerodynamic pressure measurement, and the use of a variable-capacitance accelerometer for flight-test measurements.« less

Determinants affecting consumer adoption of contactless credit card: an empirical study.

PubMed

Wang, Yu-Min

2008-12-01

The contactless credit card is one of the most promising technological innovations in the field of electronic payments. It provides consumers with greater control of payments, convenience, and transaction speed. However, contactless credit cards have yet to gain significant rates of adoption in the marketplace. Thus, effort must be made to identify factors affecting consumer adoption of contactless credit cards. Based on the technology acceptance model, innovation diffusion theory, and the relevant literature, seven variables (perceived usefulness, perceived ease of use, compatibility, perceived risk, trust, consumer involvement, availability of infrastructure) are proposed to help predict consumer adoption of contactless credit cards. Data collected from 312 respondents in Taiwan is tested against the proposed prediction model using the logistic regression approach. The results and implications of our study contribute to an expanded understanding of the factors that affect consumer adoption of contactless credit cards.

Social rhythms of the heart

PubMed Central

Pantzar, Mika; Ruckenstein, Minna; Mustonen, Veera

2017-01-01

ABSTRACT A long-term research focus on the temporality of everyday life has become revitalised with new tracking technologies that allow methodological experimentation and innovation. This article approaches rhythms of daily lives with heart-rate variability measurements that use algorithms to discover physiological stress and recovery. In the spirit of the ‘social life of methods’ approach, we aggregated individual data (n = 35) in order to uncover temporal rhythms of daily lives. The visualisation of the aggregated data suggests both daily and weekly patterns. Daily stress was at its highest in the mornings and around eight o’clock in the evening. Weekend stress patterns were dissimilar, indicating a stress peak in the early afternoon especially for men. In addition to discussing our explorations using quantitative data, the more general aim of the article is to explore the potential of new digital and mobile physiological tracking technologies for contextualising the individual in the everyday. PMID:28163655

Multi-objective optimization model of CNC machining to minimize processing time and environmental impact

NASA Astrophysics Data System (ADS)

Hamada, Aulia; Rosyidi, Cucuk Nur; Jauhari, Wakhid Ahmad

2017-11-01

Minimizing processing time in a production system can increase the efficiency of a manufacturing company. Processing time are influenced by application of modern technology and machining parameter. Application of modern technology can be apply by use of CNC machining, one of the machining process can be done with a CNC machining is turning. However, the machining parameters not only affect the processing time but also affect the environmental impact. Hence, optimization model is needed to optimize the machining parameters to minimize the processing time and environmental impact. This research developed a multi-objective optimization to minimize the processing time and environmental impact in CNC turning process which will result in optimal decision variables of cutting speed and feed rate. Environmental impact is converted from environmental burden through the use of eco-indicator 99. The model were solved by using OptQuest optimization software from Oracle Crystal Ball.

Which health technologies should be funded? A prioritization framework based explicitly on value for money

PubMed Central

2012-01-01

Background Deciding which health technologies to fund involves confronting some of the most difficult choices in medicine. As for other countries, the Israeli health system is faced each year with having to make these difficult decisions. The Public National Advisory Committee, known as ‘the Basket Committee’, selects new technologies for the basic list of health care that all Israelis are entitled to access, known as the ‘health basket’. We introduce a framework for health technology prioritization based explicitly on value for money that enables the main variables considered by decision-makers to be explicitly included. Although the framework’s exposition is in terms of the Basket Committee selecting new technologies for Israel’s health basket, we believe that the framework would also work well for other countries. Methods Our proposed prioritization framework involves comparing four main variables for each technology: 1. Incremental benefits, including ‘equity benefits’, to Israel’s population; 2. Incremental total cost to Israel’s health system; 3. Quality of evidence; and 4. Any additional ‘X-factors’ not elsewhere included, such as strategic or legal factors, etc. Applying methodology from multi-criteria decision analysis, the multiple dimensions comprising the first variable are aggregated via a points system. Results The four variables are combined for each technology and compared across the technologies in the ‘Value for Money (VfM) Chart’. The VfM Chart can be used to identify technologies that are good value for money, and, given a budget constraint, to select technologies that should be funded. This is demonstrated using 18 illustrative technologies. Conclusions The VfM Chart is an intuitively appealing decision-support tool for helping decision-makers to focus on the inherent tradeoffs involved in health technology prioritization. Such deliberations can be performed in a systematic and transparent fashion that can also be easily communicated to stakeholders, including the general public. Possible future research includes pilot-testing the VfM Chart using real-world data. Ideally, this would involve working with the Basket Committee. Likewise, the framework could be tested and applied by health technology prioritization agencies in other countries. PMID:23181391

Which health technologies should be funded? A prioritization framework based explicitly on value for money.

PubMed

Golan, Ofra; Hansen, Paul

2012-11-26

Deciding which health technologies to fund involves confronting some of the most difficult choices in medicine. As for other countries, the Israeli health system is faced each year with having to make these difficult decisions. The Public National Advisory Committee, known as 'the Basket Committee', selects new technologies for the basic list of health care that all Israelis are entitled to access, known as the 'health basket'. We introduce a framework for health technology prioritization based explicitly on value for money that enables the main variables considered by decision-makers to be explicitly included. Although the framework's exposition is in terms of the Basket Committee selecting new technologies for Israel's health basket, we believe that the framework would also work well for other countries. Our proposed prioritization framework involves comparing four main variables for each technology: 1. Incremental benefits, including 'equity benefits', to Israel's population; 2. Incremental total cost to Israel's health system; 3. Quality of evidence; and 4. Any additional 'X-factors' not elsewhere included, such as strategic or legal factors, etc. Applying methodology from multi-criteria decision analysis, the multiple dimensions comprising the first variable are aggregated via a points system. The four variables are combined for each technology and compared across the technologies in the 'Value for Money (VfM) Chart'. The VfM Chart can be used to identify technologies that are good value for money, and, given a budget constraint, to select technologies that should be funded. This is demonstrated using 18 illustrative technologies. The VfM Chart is an intuitively appealing decision-support tool for helping decision-makers to focus on the inherent tradeoffs involved in health technology prioritization. Such deliberations can be performed in a systematic and transparent fashion that can also be easily communicated to stakeholders, including the general public. Possible future research includes pilot-testing the VfM Chart using real-world data. Ideally, this would involve working with the Basket Committee. Likewise, the framework could be tested and applied by health technology prioritization agencies in other countries.

12 CFR 619.9340 - Variable interest rate.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Variable interest rate. 619.9340 Section 619.9340 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM DEFINITIONS § 619.9340 Variable interest rate. An interest rate on the outstanding loan balances, which may be changed from time to time...

Work demands and health consequences of organizational and technological measures introduced to enhance the quality of home care services--A subgroup analysis.

PubMed

Andersen, Gunn Robstad; Bendal, Synne; Westgaard, Rolf H

2015-11-01

This study of home care workers in a Norwegian municipality aimed to examine the effect of two measures involving organizational (job checklists) and technological (personal digital assistants) job aids on perceived work demands and musculoskeletal health. Questionnaire data was collected in 2009 (n = 138, response rate 76.2%) and 2011 (n = 80, response rate 54%). Forty-six home care workers responded at both waves. Respondents were assigned into 'high', 'moderate' and 'low' strain groups based on their responses to open and closed survey questions regarding impact of the two measures. One-way ANOVA with post-hoc t-tests and regression analyses investigated group differences and examined development in variables. Perceived work demands and health effects over the two-year study period were unchanged overall, yet significant differences between subgroups were highlighted. Work demands and shoulder-neck pain remained high for high-strain workers, but were reduced for low and moderate strain workers. Management should be aware of diversity in worker responses to rationalizations and give priority to supplementary, targeted measures to counteract adverse effects. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Heart rate variability and aerobic fitness.

PubMed

De Meersman, R E

1993-03-01

Heart rate variability, a noninvasive marker of parasympathetic activity, diminishes with aging and is augmented after exercise training. Whether habitual exercise over time can attenuate this loss is unknown. This cross-sectional investigation compared 72 male runners, aged 15 to 83 to 72 age- and weight-matched sedentary control subjects for the amplitude of their heart rate variability. Heart rate variability was assessed during rest while subjects were breathing at a rate of 6 breaths per minute and at an augmented tidal volume (tidal volume = 30% of vital capacity). Fitness levels were assessed with on-line, open-circuit spirometry while subjects were performing an incremental stress test. Overall results between the two groups showed that the physically active group had significantly higher fitness levels (p < 0.001), which were associated with significantly higher levels of heart rate variability, when compared with their sedentary counterparts (p < 0.001). These findings provide suggestive evidence for habitual aerobic exercise as a beneficial modulator of heart rate variability in an aging population.

Principals' Personal Variables and Information and Communication Technology Utilization in Federal Capital Territory Senior Secondary Schools, Abuja, Nigeria

ERIC Educational Resources Information Center

Ogunshola, Roseline Folashade; Adeniyi, Abiodun

2017-01-01

The study investigated principals' personal variables and information and communication technology utilization in Federal Capital Territory (FCT) senior secondary schools, Abuja, Nigeria. The study adopted the correlational research design. The study used a sample of 94 senior secondary schools (including public and private) in FCT. Stratified…

Personal Professional Development Efforts of Science and Technology Teachers in Their Fields

ERIC Educational Resources Information Center

Bilgin, Aysegul; Balbag, Mustafa Zafer

2018-01-01

The aim of this study is to examine the personal professional development efforts of science and technology teachers in their fields with regard to some variables. These variables were determined as gender, year of seniority and sufficiency level of the laboratory equipment. Moreover, the relation between the actual efforts exerted by science and…

Training Effects on Older Adults in Information and Communication Technologies Considering Psychosocial Variables

ERIC Educational Resources Information Center

Ferreira, Sónia; Torres, Ana; Mealha, Óscar; Veloso, Ana

2015-01-01

The main aim of this study is to contribute knowledge about the impact of the use of information and communication technologies (ICT) on the self-concept, mood, and quality of life of institutionalized older adults in retirement homes and day care centers (Portuguese institutions). It also studies the influence of independent variables such as…

The Differences in Career-Related Variables between Temporary and Permanent Employees in Information Technology Companies in Korea

ERIC Educational Resources Information Center

Tak, Jinkook; Lim, Beomsik

2008-01-01

The purpose of this study was to examine differences in career-related variables, such as career commitment and career satisfaction, based on employment status (temporary vs. permanent employees) and job type (professional vs. nonprofessional employees). With a sample of 302 employees working in information technology companies in Korea, it was…

Students, Teachers, and Schools as Sources of Variability, Integrity, and Sustainability in Implementing Progress Monitoring

ERIC Educational Resources Information Center

Bolt, Daniel M.; Ysseldyke, Jim; Patterson, Michael J.

2010-01-01

A three-level variance decomposition analysis was used to examine the sources of variability in implementation of a technology-enhanced progress monitoring system within each year of a 2-year study using a randomized-controlled design. We show that results of technology-enhanced progress monitoring are not necessarily a measure of student…

Key factors influencing the intention of telecare adoption: an institutional perspective.

PubMed

Liu, Chung-Feng

2011-05-01

The objective of this study was to explore key factors of influence on the adoption of telecare by care institutions. This investigation was based on an extensive Technology-Organization-Environment framework comprising the four constructs of technology, organization, environment, and the project planning as well as corresponding variables. This study utilized a self-administered questionnaire for data collection, focusing on the managers of all 339 nursing homes in Taiwan for the census survey. A total of 70 valid questionnaires yielded a response rate of 20.65%. After analyzing the responses through the Partial Least Squares approach, government support, technological knowledge, supplier support, team skills, and compatibility were found to be the five key factors that positively impact intention to adopt telecare from an institutional perspective. The results of this study indicated that care institutions, for the most part, are willing to develop telecare and are already incorporating preliminary applications of telecare, such as distance learning and resident positioning. Solutions to potential issues related to implementing telecare in practice are also proposed in this study.

Superposed epoch analysis of physiological fluctuations: possible space weather connections

NASA Astrophysics Data System (ADS)

Wanliss, James; Cornélissen, Germaine; Halberg, Franz; Brown, Denzel; Washington, Brien

2018-03-01

There is a strong connection between space weather and fluctuations in technological systems. Some studies also suggest a statistical connection between space weather and subsequent fluctuations in the physiology of living creatures. This connection, however, has remained controversial and difficult to demonstrate. Here we present support for a response of human physiology to forcing from the explosive onset of the largest of space weather events—space storms. We consider a case study with over 16 years of high temporal resolution measurements of human blood pressure (systolic, diastolic) and heart rate variability to search for associations with space weather. We find no statistically significant change in human blood pressure but a statistically significant drop in heart rate during the main phase of space storms. Our empirical findings shed light on how human physiology may respond to exogenous space weather forcing.

Superposed epoch analysis of physiological fluctuations: possible space weather connections.

PubMed

Wanliss, James; Cornélissen, Germaine; Halberg, Franz; Brown, Denzel; Washington, Brien

2018-03-01

There is a strong connection between space weather and fluctuations in technological systems. Some studies also suggest a statistical connection between space weather and subsequent fluctuations in the physiology of living creatures. This connection, however, has remained controversial and difficult to demonstrate. Here we present support for a response of human physiology to forcing from the explosive onset of the largest of space weather events-space storms. We consider a case study with over 16 years of high temporal resolution measurements of human blood pressure (systolic, diastolic) and heart rate variability to search for associations with space weather. We find no statistically significant change in human blood pressure but a statistically significant drop in heart rate during the main phase of space storms. Our empirical findings shed light on how human physiology may respond to exogenous space weather forcing.

On-line coating of glass with tin oxide by atmospheric pressure chemical vapor deposition.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allendorf, Mark D.; Sopko, J.F.; Houf, William G.

2006-11-01

Atmospheric pressure chemical vapor deposition (APCVD) of tin oxide is a very important manufacturing technique used in the production of low-emissivity glass. It is also the primary method used to provide wear-resistant coatings on glass containers. The complexity of these systems, which involve chemical reactions in both the gas phase and on the deposition surface, as well as complex fluid dynamics, makes process optimization and design of new coating reactors a very difficult task. In 2001 the U.S. Dept. of Energy Industrial Technologies Program Glass Industry of the Future Team funded a project to address the need for more accuratemore » data concerning the tin oxide APCVD process. This report presents a case study of on-line APCVD using organometallic precursors, which are the primary reactants used in industrial coating processes. Research staff at Sandia National Laboratories in Livermore, CA, and the PPG Industries Glass Technology Center in Pittsburgh, PA collaborated to produce this work. In this report, we describe a detailed investigation of the factors controlling the growth of tin oxide films. The report begins with a discussion of the basic elements of the deposition chemistry, including gas-phase thermochemistry of tin species and mechanisms of chemical reactions involved in the decomposition of tin precursors. These results provide the basis for experimental investigations in which tin oxide growth rates were measured as a function of all major process variables. The experiments focused on growth from monobutyltintrichloride (MBTC) since this is one of the two primary precursors used industrially. There are almost no reliable growth-rate data available for this precursor. Robust models describing the growth rate as a function of these variables are derived from modeling of these data. Finally, the results are used to conduct computational fluid dynamic simulations of both pilot- and full-scale coating reactors. As a result, general conclusions are reached concerning the factors affecting the growth rate in on-line APCVD reactors. In addition, a substantial body of data was generated that can be used to model many different industrial tin oxide coating processes. These data include the most extensive compilation of thermochemistry for gas-phase tin-containing species as well as kinetic expressions describing tin oxide growth rates over a wide range of temperatures, pressures, and reactant concentrations.« less

Modeling climate effects on hip fracture rate by the multivariate GARCH model in Montreal region, Canada.

PubMed

Modarres, Reza; Ouarda, Taha B M J; Vanasse, Alain; Orzanco, Maria Gabriela; Gosselin, Pierre

2014-07-01

Changes in extreme meteorological variables and the demographic shift towards an older population have made it important to investigate the association of climate variables and hip fracture by advanced methods in order to determine the climate variables that most affect hip fracture incidence. The nonlinear autoregressive moving average with exogenous variable-generalized autoregressive conditional heteroscedasticity (ARMAX-GARCH) and multivariate GARCH (MGARCH) time series approaches were applied to investigate the nonlinear association between hip fracture rate in female and male patients aged 40-74 and 75+ years and climate variables in the period of 1993-2004, in Montreal, Canada. The models describe 50-56% of daily variation in hip fracture rate and identify snow depth, air temperature, day length and air pressure as the influencing variables on the time-varying mean and variance of the hip fracture rate. The conditional covariance between climate variables and hip fracture rate is increasing exponentially, showing that the effect of climate variables on hip fracture rate is most acute when rates are high and climate conditions are at their worst. In Montreal, climate variables, particularly snow depth and air temperature, appear to be important predictors of hip fracture incidence. The association of climate variables and hip fracture does not seem to change linearly with time, but increases exponentially under harsh climate conditions. The results of this study can be used to provide an adaptive climate-related public health program and ti guide allocation of services for avoiding hip fracture risk.

Modeling climate effects on hip fracture rate by the multivariate GARCH model in Montreal region, Canada

NASA Astrophysics Data System (ADS)

Modarres, Reza; Ouarda, Taha B. M. J.; Vanasse, Alain; Orzanco, Maria Gabriela; Gosselin, Pierre

2014-07-01

Changes in extreme meteorological variables and the demographic shift towards an older population have made it important to investigate the association of climate variables and hip fracture by advanced methods in order to determine the climate variables that most affect hip fracture incidence. The nonlinear autoregressive moving average with exogenous variable-generalized autoregressive conditional heteroscedasticity (ARMA X-GARCH) and multivariate GARCH (MGARCH) time series approaches were applied to investigate the nonlinear association between hip fracture rate in female and male patients aged 40-74 and 75+ years and climate variables in the period of 1993-2004, in Montreal, Canada. The models describe 50-56 % of daily variation in hip fracture rate and identify snow depth, air temperature, day length and air pressure as the influencing variables on the time-varying mean and variance of the hip fracture rate. The conditional covariance between climate variables and hip fracture rate is increasing exponentially, showing that the effect of climate variables on hip fracture rate is most acute when rates are high and climate conditions are at their worst. In Montreal, climate variables, particularly snow depth and air temperature, appear to be important predictors of hip fracture incidence. The association of climate variables and hip fracture does not seem to change linearly with time, but increases exponentially under harsh climate conditions. The results of this study can be used to provide an adaptive climate-related public health program and ti guide allocation of services for avoiding hip fracture risk.

Capturing field-scale variability in crop performance across a regional-scale climosequence

NASA Astrophysics Data System (ADS)

Brooks, E. S.; Poggio, M.; Anderson, T. R.; Gasch, C.; Yourek, M. A.; Ward, N. K.; Magney, T. S.; Brown, D. J.; Huggins, D. R.

2014-12-01

With the increasing availability of variable rate technology for applying fertilizers and other agrichemicals in dryland agricultural production systems there is a growing need to better capture and understand the processes driving field scale variability in crop yield and soil water. This need for a better understanding of field scale variability has led to the recent designation of the R. J. Cook Agronomy Farm (CAF) (Pullman, WA, USA) as a United States Department of Agriculture Long-Term Agro-Ecosystem Research (LTAR) site. Field scale variability at the CAF is closely monitored using extensive environmental sensor networks and intensive hand sampling. As investigating land-soil-water dynamics at CAF is essential for improving precision agriculture, transferring this knowledge across the regional-scale climosequence is challenging. In this study we describe the hydropedologic functioning of the CAF in relation to five extensively instrumented field sites located within 50 km in the same climatic region. The formation of restrictive argillic soil horizons in the wetter, cooler eastern edge of the region results in the development of extensive perched water tables, surface saturation, and surface runoff, whereas excess water is not an issue in the warmer, drier, western edge of the region. Similarly, crop and tillage management varies across the region as well. We discuss the implications of these regional differences on field scale management decisions and demonstrate how we are using proximal soil sensing and remote sensing imagery to better understand and capture field scale variability at a particular field site.

Use of wound dressings with soft silicone adhesive technology.

PubMed

Morris, Clare; Emsley, Paulene; Marland, Elizabeth; Meuleneire, Frans; White, Richard

2009-04-01

To evaluate how pain, during and in-between dressing changes, is affected by the introduction of Mepilex Border Lite, a wound dressing manufactured by Mölnlycke Health Care using Safetac soft silicone adhesive technology, to the treatment of different types of paediatric wounds/skin injuries. Wounds/skin injuries that met the criteria for inclusion in the study were dressed with Mepilex Border Lite. Patients were followed for six weeks or until their wounds/skin injuries had healed, whichever occurred earlier. At each dressing change, pain severity before and during dressing removal was rated by the patient and the investigator on a scale from zero (no pain at all) to ten (worst pain ever). Other variables measured included: signs of trauma to wound/skin injury and surrounding skin, the proportion of viable/non-viable tissue, the quantity and appearance of exudate, odour, and clinical signs of infection. At the final dressing change, patients and investigators completed questionnaires to rate the dressing performance. Mean pain severity scores were significantly lower (p < or = 0.003) at the first dressing change than at baseline. Over 99.5 per cent of the Mepilex Border Lite dressing changes were reported to be atraumatic and more than half of the wounds healed within the study period. Conformability, ease of use, ease of removal, patient comfort, and overall experience with the dressing were rated as 'good' to 'very good' at the vast majority of final visit evaluations. This study provides further evidence of the ability of dressings with Safetac soft silicone adhesive technology to minimise trauma and pain and demonstrates the ability of Mepilex Border Lite to overcome the clinical challenges associated with the use of dressings on the wounds/skin injuries of paediatric patients.

Effect of Temperature on Heart Rate Variability in Neonatal ICU Patients With Hypoxic-Ischemic Encephalopathy.

PubMed

Massaro, An N; Campbell, Heather E; Metzler, Marina; Al-Shargabi, Tareq; Wang, Yunfei; du Plessis, Adre; Govindan, Rathinaswamy B

2017-04-01

To determine whether measures of heart rate variability are related to changes in temperature during rewarming after therapeutic hypothermia for hypoxic-ischemic encephalopathy. Prospective observational study. Level 4 neonatal ICU in a free-standing academic children's hospital. Forty-four infants with moderate to severe hypoxic-ischemic encephalopathy treated with therapeutic hypothermia. Continuous electrocardiogram data from 2 hours prior to rewarming through 2 hours after completion of rewarming (up to 10 hr) were analyzed. Median beat-to-beat interval and measures of heart rate variability were quantified including beat-to-beat interval SD, low and high frequency relative spectral power, detrended fluctuation analysis short and long α exponents (αS and αL), and root mean square short and long time scales. The relationships between heart rate variability measures and esophageal/axillary temperatures were evaluated. Heart rate variability measures low frequency, αS, and root mean square short and long time scales were negatively associated, whereas αL was positively associated, with temperature (p < 0.01). These findings signify an overall decrease in heart rate variability as temperature increased toward normothermia. Measures of heart rate variability are temperature dependent in the range of therapeutic hypothermia to normothermia. Core body temperature needs to be considered when evaluating heart rate variability metrics as potential physiologic biomarkers of illness severity in hypoxic-ischemic encephalopathy infants undergoing therapeutic hypothermia.

Evaluation of teledermatology adoption by health-care professionals using a modified Technology Acceptance Model.

PubMed

Orruño, Estibalitz; Gagnon, Marie Pierre; Asua, José; Ben Abdeljelil, Anis

2011-01-01

We examined the main factors affecting the intention of physicians to use teledermatology using a modified Technology Acceptance Model (TAM). The investigation was carried out during a teledermatology pilot study conducted in Spain. A total of 276 questionnaires were sent to physicians by email and 171 responded (62%). Cronbach's alpha was acceptably high for all constructs. Theoretical variables were well correlated with each other and with the dependent variable (Intention to Use). Logistic regression indicated that the original TAM model was good at predicting physicians' intention to use teledermatology and that the variables Perceived Usefulness and Perceived Ease of Use were both significant (odds ratios of 8.4 and 7.4, respectively). When other theoretical variables were added, the model was still significant and it also became more powerful. However, the only significant predictor in the modified model was Facilitators with an odds ratio of 9.9. Thus the TAM was good at predicting physicians' intention to use teledermatology. However, the most important variable was the perception of Facilitators to using the technology (e.g. infrastructure, training and support).

Forecasting daily source air quality using multivariate statistical analysis and radial basis function networks.

PubMed

Sun, Gang; Hoff, Steven J; Zelle, Brian C; Nelson, Minda A

2008-12-01

It is vital to forecast gas and particle matter concentrations and emission rates (GPCER) from livestock production facilities to assess the impact of airborne pollutants on human health, ecological environment, and global warming. Modeling source air quality is a complex process because of abundant nonlinear interactions between GPCER and other factors. The objective of this study was to introduce statistical methods and radial basis function (RBF) neural network to predict daily source air quality in Iowa swine deep-pit finishing buildings. The results show that four variables (outdoor and indoor temperature, animal units, and ventilation rates) were identified as relative important model inputs using statistical methods. It can be further demonstrated that only two factors, the environment factor and the animal factor, were capable of explaining more than 94% of the total variability after performing principal component analysis. The introduction of fewer uncorrelated variables to the neural network would result in the reduction of the model structure complexity, minimize computation cost, and eliminate model overfitting problems. The obtained results of RBF network prediction were in good agreement with the actual measurements, with values of the correlation coefficient between 0.741 and 0.995 and very low values of systemic performance indexes for all the models. The good results indicated the RBF network could be trained to model these highly nonlinear relationships. Thus, the RBF neural network technology combined with multivariate statistical methods is a promising tool for air pollutant emissions modeling.

Design and Evaluation of an Intelligent Remote Tidal Volume Variability Monitoring System in E-Health Applications.

PubMed

Fekr, Atena Roshan; Radecka, Katarzyna; Zilic, Zeljko

2015-09-01

A reliable long-term monitoring and diagnosis of breath disorders at an early stage provides an improvement of medical act, life expectancy, and quality of life while decreasing the costs of treatment and medical services. Therefore, a real-time unobtrusive monitoring of respiration patterns, as well as breath parameters, is a critical need in medical applications. In this paper, we propose an intelligent system for patient home care, capable of measuring respiration rate and tidal volume variability via a wearable sensing technology. The proposed system is designed particularly for the goal of diagnosis and treatment in patients with pathological breathing, e.g., respiratory complications after surgery or sleep disorders. The complete system was comprised of wearable calibrated accelerometer sensor, Bluetooth low energy, and cloud database. The experiments are conducted with eight subjects and the overall error in respiration rate calculation is obtained 0.29%±0.33% considering SPR-BTA spirometer as the reference. We also introduce a method for tidal volume variability estimation while validated using Pearson correlation. Furthermore, since it is essential to detect the critical events resulted from sudden rise or fall in per breath tidal volume of the patients, we provide a technique to automatically find the accurate threshold values based on each individual breath characteristics. Therefore, the system is able to detect the major changes, precisely by more than 98%, and provide immediate feedback such as sound alarm for round-the-clock respiration monitoring.

Smile esthetics from patients' perspectives for faces of varying attractiveness.

PubMed

Chang, Chan A; Fields, Henry W; Beck, Frank Michael; Springer, Nathan C; Firestone, Allen R; Rosenstiel, Stephen; Christensen, James C

2011-10-01

Delivering an attractive smile is a key element in orthodontic patient satisfaction. Smile characteristics can be affected by the facial context. The purpose of this study was to investigate smile esthetics related to facial attractiveness and sex of the model. Attractive, average, and unattractive model faces (2 of each; 3 male, 3 female) determined by peer ratings were combined with 10 smile variables (buccal corridor, smile arc, maxillary gingival discrepancy, gingival display, incisal-edge discrepancy, cant, overbite, central-incisor gingival margin discrepancy, and maxillary midline to face, and maxillary midline to mandibular midline). Each smile characteristic was altered digitally and presented with slider technology to allow a continuous range of choices. Raters chose the ideal and the limits of acceptability. The variables were divided into 6 separate surveys and rated 96 times. Reliability was assessed by answering each question twice. Individual smile variable reliability ranged from fair to excellent, except for the buccal corridor. Clinically significant values were defined as greater than 1.0 mm with statistical significance (P <0.05). Rater sex did not make a difference. Clinical significance was found for smile arc, gingival display, and maxillary midline to face. For females, accentuated smile arcs were preferred for the unattractive and attractive models compared with the average models. The opposite was found for male models. More gingival display was preferred for the attractive and unattractive male and female models compared with the average models. Attractive models were allowed less midline deviation. Facial attractiveness and model sex impacted smile variables with a facial context, except for occlusal cant. These smile characteristics with a facial context should be considered when diagnosing and planning treatment for an orthodontic patient. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Investment appraisal of technology innovations on dairy farm electricity consumption.

PubMed

Upton, J; Murphy, M; De Boer, I J M; Groot Koerkamp, P W G; Berentsen, P B M; Shalloo, L

2015-02-01

The aim of this study was to conduct an investment appraisal for milk-cooling, water-heating, and milk-harvesting technologies on a range of farm sizes in 2 different electricity-pricing environments. This was achieved by using a model for electricity consumption on dairy farms. The model simulated the effect of 6 technology investment scenarios on the electricity consumption and electricity costs of the 3 largest electricity-consuming systems within the dairy farm (i.e., milk-cooling, water-heating, and milking machine systems). The technology investment scenarios were direct expansion milk-cooling, ice bank milk-cooling, milk precooling, solar water-heating, and variable speed drive vacuum pump-milking systems. A dairy farm profitability calculator was combined with the electricity consumption model to assess the effect of each investment scenario on the total discounted net income over a 10-yr period subsequent to the investment taking place. Included in the calculation were the initial investments, which were depreciated to zero over the 10-yr period. The return on additional investment for 5 investment scenarios compared with a base scenario was computed as the investment appraisal metric. The results of this study showed that the highest return on investment figures were realized by using a direct expansion milk-cooling system with precooling of milk to 15°C with water before milk entry to the storage tank, heating water with an electrical water-heating system, and using standard vacuum pump control on the milking system. Return on investment figures did not exceed the suggested hurdle rate of 10% for any of the ice bank scenarios, making the ice bank system reliant on a grant aid framework to reduce the initial capital investment and improve the return on investment. The solar water-heating and variable speed drive vacuum pump scenarios failed to produce positive return on investment figures on any of the 3 farm sizes considered on either the day and night tariff or the flat tariff, even when the technology costs were reduced by 40% in a sensitivity analysis of technology costs. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Who’s Using PDAs? Estimates of PDA Use by Health Care Providers: A Systematic Review of Surveys

PubMed Central

El Emam, Khaled

2006-01-01

Background Personal digital assistants (PDAs) find many uses in health care. Knowing rates of collective PDA use among health care providers is an important guiding step to further understanding those health care contexts that are most suited to PDA use and whether PDAs provide improved health outcomes. Objectives The objectives of this study were to estimate current and future PDA use among health care providers and to discuss possible implications of that use on choice of technology in clinical practice and research. Methods This study was a systematic review of PDA usage surveys. Surveys were identified as part of an ongoing systematic review on the use of handheld devices. Reports from eight databases covering both biomedical sciences and engineering (1993-2006) were screened against distinct eligibility criteria. Data from included surveys were extracted and verified in a standardized way and were assessed descriptively. Results We identified 23 relevant surveys, 15 of which were derived from peer-reviewed journals. This cohort of surveys was published between 2000 and 2005. Overall, since 1999, there is clear evidence of an increasing trend in PDA use. The current overall adoption rate for individual professional use ranges between 45% and 85%, indicating high but somewhat variable adoption, primarily among physicians. Conclusions Younger physicians and residents and those working in large and hospital-based practices are more likely to use a PDA. The adoption rate is now at its highest rate of increase according to a commonly accepted diffusion of innovations model. A common problem with the evaluation of information technology is that use frequently precedes research. This is the case here, in which PDA adoption rates are already high and projections are for rapid growth in the short term. In general, it appears that professional PDA use in health care settings involves more administrative and organizational tasks than those related to patient care, perhaps signaling where the growth in adoption is most likely to occur. We conclude that physicians are likely accustomed to using a PDA, and, therefore, technology expertise will probably not be a barrier to implementing PDA applications. However, there is an urgent need to evaluate the effectiveness and efficiency of specific tasks using handheld technology to inform those developing and those using PDA applications. PMID:16867970

Six-minute walk test and heart rate variability: lack of association in advanced stages of heart failure.

PubMed

Woo, M A; Moser, D K; Stevenson, L W; Stevenson, W G

1997-09-01

The 6-minute walk and heart rate variability have been used to assess mortality risk in patients with heart failure, but their relationship to each other and their usefulness for predicting mortality at 1 year are unknown. To assess the relationships between the 6-minute walk test, heart rate variability, and 1-year mortality. A sample of 113 patients in advanced stages of heart failure (New York Heart Association Functional Class III-IV, left ventricular ejection < 0.25) were studied. All 6-minute walks took place in an enclosed, level, measured corridor and were supervised by the same nurse. Heart rate variability was measured by using (1) a standard-deviation method and (2) Poincaré plots. Data on RR intervals obtained by using 24-hour Holter monitoring were analyzed. Survival was determined at 1 year after the Holter recording. The results showed no significant associations between the results of the 6-minute walk and the two measures of heart rate variability. The results of the walk were related to 1-year mortality but not to the risk of sudden death. Both measures of heart rate variability had significant associations with 1-year mortality and with sudden death. However, only heart rate variability measured by using Poincaré plots was a predictor of total mortality and risk of sudden death, independent of left ventricular ejection fraction, serum levels of sodium, results of the 6-minute walk test, and the standard-deviation measure of heart rate variability. Results of the 6-minute walk have poor association with mortality and the two measures of heart rate variability in patients with advanced-stage heart failure and a low ejection fraction. Further studies are needed to determine the optimal clinical usefulness of the 6-minute walk and heart rate variability in patients with advanced-stage heart failure.

Modelling of percolation rate of stormwater from underground infiltration systems.

PubMed

Burszta-Adamiak, Ewa; Lomotowski, Janusz

2013-01-01

Underground or surface stormwater storage tank systems that enable the infiltration of water into the ground are basic elements used in Sustainable Urban Drainage Systems (SUDS). So far, the design methods for such facilities have not taken into account the phenomenon of ground clogging during stormwater infiltration. Top layer sealing of the filter bed influences the infiltration rate of water into the ground. This study presents an original mathematical model describing changes in the infiltration rate variability in the phases of filling and emptying the storage and infiltration tank systems, which enables the determination of the degree of top ground layer clogging. The input data for modelling were obtained from studies conducted on experimental sites on objects constructed on a semi-technological scale. The experiment conducted has proven that the application of the model developed for the phase of water infiltration enables us to estimate the degree of module clogging. However, this method is more suitable for reservoirs embedded in more permeable soils than for those located in cohesive soils.

[Studies on the brand traceability of milk powder based on NIR spectroscopy technology].

PubMed

Guan, Xiao; Gu, Fang-Qing; Liu, Jing; Yang, Yong-Jian

2013-10-01

Brand traceability of several different kinds of milk powder was studied by combining near infrared spectroscopy diffuse reflectance mode with soft independent modeling of class analogy (SIMCA) in the present paper. The near infrared spectrum of 138 samples, including 54 Guangming milk powder samples, 43 Netherlands samples, and 33 Nestle samples and 8 Yili samples, were collected. After pretreatment of full spectrum data variables in training set, principal component analysis was performed, and the contribution rate of the cumulative variance of the first three principal components was about 99.07%. Milk powder principal component regression model based on SIMCA was established, and used to classify the milk powder samples in prediction sets. The results showed that the recognition rate of Guangming milk powder, Netherlands milk powder and Nestle milk powder was 78%, 75% and 100%, the rejection rate was 100%, 87%, and 88%, respectively. Therefore, the near infrared spectroscopy combined with SIMCA model can classify milk powder with high accuracy, and is a promising identification method of milk powder variety.

Sediment transport and evaluation of sediment surrogate ratings in the Kootenai River near Bonners Ferry, Idaho, Water Years 2011–14

USGS Publications Warehouse

Wood, Molly S.; Fosness, Ryan L.; Etheridge, Alexandra B.

2015-12-14

Acoustic surrogate ratings were developed between backscatter data collected using acoustic Doppler velocity meters (ADVMs) and results of suspended-sediment samples. Ratings were successfully fit to various sediment size classes (total, fines, and sands) using ADVMs of different frequencies (1.5 and 3 megahertz). Surrogate ratings also were developed using variations of streamflow and seasonal explanatory variables. The streamflow surrogate ratings produced average annual sediment load estimates that were 8–32 percent higher, depending on site and sediment type, than estimates produced using the acoustic surrogate ratings. The streamflow surrogate ratings tended to overestimate suspended-sediment concentrations and loads during periods of elevated releases from Libby Dam as well as on the falling limb of the streamflow hydrograph. Estimates from the acoustic surrogate ratings more closely matched suspended-sediment sample results than did estimates from the streamflow surrogate ratings during these periods as well as for rating validation samples collected in water year 2014. Acoustic surrogate technologies are an effective means to obtain continuous, accurate estimates of suspended-sediment concentrations and loads for general monitoring and sediment-transport modeling. In the Kootenai River, continued operation of the acoustic surrogate sites and use of the acoustic surrogate ratings to calculate continuous suspended-sediment concentrations and loads will allow for tracking changes in sediment transport over time.

Characterization of air profiles impeded by plant canopies for a variable-rate air-assisted sprayer

USDA-ARS?s Scientific Manuscript database

The preferential design for variable-rate orchard and nursery sprayers relies on tree structure to control liquid and air flow rates. Demand for this advanced feature has been incremental as the public demand on reduction of pesticide use. A variable-rate, air assisted, five-port sprayer had been in...

Plasma etching of polymers like SU8 and BCB

NASA Astrophysics Data System (ADS)

Mischke, Helge; Gruetzner, Gabi; Shaw, Mark

2003-01-01

Polymers with high viscosity, like SU8 and BCB, play a dominant role in MEMS application. Their behavior in a well defined etching plasma environment in a RIE mode was investigated. The 40.68 MHz driven bottom electrode generates higher etch rates combined with much lower bias voltages by a factor of ten or a higher efficiency of the plasma with lower damaging of the probe material. The goal was to obtain a well-defined process for the removal and structuring of SU8 and BCB using fluorine/oxygen chemistry, defined using variables like electron density and collision rate. The plasma parameters are measured and varied using a production proven technology called SEERS (Self Excited Electron Resonance Spectroscopy). Depending on application and on Polymer several metals are possible (e.g., gold, aluminum). The characteristic of SU8 and BCB was examined in the case of patterning by dry etching in a CF4/O2 chemistry. Etch profile and etch rate correlate surprisingly well with plasma parameters like electron density and electron collision rate, thus allowing to define to adjust etch structure in situ with the help of plasma parameters.

Advanced Engine Cycles Analyzed for Turbofans With Variable-Area Fan Nozzles Actuated by a Shape Memory Alloy

NASA Technical Reports Server (NTRS)

Berton, Jeffrey J.

2002-01-01

Advanced, large commercial turbofan engines using low-fan-pressure-ratio, very high bypass ratio thermodynamic cycles can offer significant fuel savings over engines currently in operation. Several technological challenges must be addressed, however, before these engines can be designed. To name a few, the high-diameter fans associated with these engines pose a significant packaging and aircraft installation challenge, and a large, heavy gearbox is often necessary to address the differences in ideal operating speeds between the fan and the low-pressure turbine. Also, the large nacelles contribute aerodynamic drag penalties and require long, heavy landing gear when mounted on conventional, low wing aircraft. Nevertheless, the reduced fuel consumption rates of these engines are a compelling economic incentive, and fans designed with low pressure ratios and low tip speeds offer attractive noise-reduction benefits. Another complication associated with low-pressure-ratio fans is their need for variable flow-path geometry. As the design fan pressure ratio is reduced below about 1.4, an operational disparity is set up in the fan between high and low flight speeds. In other words, between takeoff and cruise there is too large a swing in several key fan parameters-- such as speed, flow, and pressure--for a fan to accommodate. One solution to this problem is to make use of a variable-area fan nozzle (VAFN). However, conventional, hydraulically actuated variable nozzles have weight, cost, maintenance, and reliability issues that discourage their use with low-fan-pressure-ratio engine cycles. United Technologies Research, in cooperation with NASA, is developing a revolutionary, lightweight, and reliable shape memory alloy actuator system that can change the on-demand nozzle exit area by up to 20 percent. This "smart material" actuation technology, being studied under NASA's Ultra-Efficient Engine Technology (UEET) Program and Revolutionary Concepts in Aeronautics (RevCon) Program, has the potential to enable the next generation of efficient, quiet, very high bypass ratio turbofans. NASA Glenn Research Center's Propulsion Systems Analysis Office, along with NASA Langley Research Center's Systems Analysis Branch, conducted an independent analytical assessment of this new technology to provide strategic guidance to UEET and RevCon. A 2010-technology-level high-spool engine core was designed for this evaluation. Two families of low-spool components, one with and one without VAFN's, were designed to operate with the core. This "constant core" approach was used to hold most design parameters constant so that any performance differences between the VAFN and fixed nozzle cycles could be attributed to the VAFN technology alone. In this manner, the cycle design regimes that offer a performance payoff when VAFN's are used could be identified. The NASA analytical model of a performance-optimized VAFN turbofan with a fan pressure ratio of 1.28 is shown. Mission analyses of the engines were conducted using the notional, long-haul, advanced commercial twinjet shown. A high wing design was used to accommodate the large high-bypassratio engines. The mission fuel reduction benefit of very high bypass shape-memory-alloy VAFN aircraft was calculated to be 8.3 percent lower than a moderate bypass cycle using a conventional fixed nozzle. Shape-memory-alloy VAFN technology is currently under development in NASA's UEET and RevCon Programs.

Climate Variability Program

NASA Technical Reports Server (NTRS)

Halpern, David (Editor)

2002-01-01

The Annual Report of the Climate Variability Program briefly describes research activities of Principal Investigators who are funded by NASA's Earth Science Enterprise Research Division. The report is focused on the year 2001. Utilization of satellite observations is a singularity of research on climate science and technology at JPL (Jet Propulsion Laboratory). Research at JPL has two foci: generate new knowledge and develop new technology.

A life-cycle description of underground coal mining

NASA Technical Reports Server (NTRS)

Lavin, M. L.; Borden, C. S.; Duda, J. R.

1978-01-01

An initial effort to relate the major technological and economic variables which impact conventional underground coal mining systems, in order to help identify promising areas for advanced mining technology is described. The point of departure is a series of investment analyses published by the United States Bureau of Mines, which provide both the analytical framework and guidance on a choice of variables.

Perceptions of Blended Learning Competencies and Obstacles among Educational Technology Students in Light of Different Anxiety Levels and Locus of Control

ERIC Educational Resources Information Center

Aldalalah, Osamah Ahmad; Gasaymeh, Al-Mothana M.

2014-01-01

The purpose of this study was to investigate the effects of locus of control and anxiety level on the Jordanian educational technology students' perceived blended learning competencies and obstacles. The independent variables were the locus of control (Internal, External) and anxiety level (Low, Moderate, High). The dependent variables were the…

Assistive technology outcomes in post-secondary students with disabilities: the influence of diagnosis, gender, and class-level.

PubMed

Malcolm, Matt P; Roll, Marla C

2017-11-01

This study investigated how outcomes of assistive technology (AT) services for college students with disabilities are influenced by diagnosis, gender and class-level (e.g., Freshman). Students' pre- and post-intervention ratings of their performance and satisfaction of common academic tasks (using the Canadian Occupational Performance Measure, COPM) were analyzed, as well as students' responses on a survey about AT service provision, use, and preferences. Data from 455 students revealed "learning disability" to be the most prevalent diagnosis (38%), similar numbers of females and males served, and Freshmen (23.1%) as the largest class-level seeking AT services. For COPM data, each two-way analysis of variance (ANOVA) (grouping variable = diagnosis) revealed that pre-post change scores significantly improved for the entire sample, and that students with a mood disorder experienced the greatest changes compared to other diagnoses. COPM scores significantly and similarly improved for females and males, and across class levels. AT Survey ratings about timeliness of services and independent AT use were significantly lower for students with mobility deficits/pain and neurological damage, respectively. Gender and class-level variables did not significantly impact AT Survey ratings. The study results reveal that features of a college student's diagnosis may influence AT service outcomes, and student-perceptions of AT services ability to use AT. Implications for Rehabilitation College students who are Freshman and/or who have a learning disability are the most prevalent students referred for campus-based assistive technology services. While student ratings of academic task performance significantly increase across diagnostic groupings, these improvements were greatest for those with a mood disorder compared to other diagnostic groups. Service-providers should consider that features of certain diagnoses or disabilities may influence the student?s perception of AT service provision and their ability to use AT. A student's gender and class-level (e.g., Freshman) do not appear to influence the outcomes of AT services for college students with disabilities.

Changes in heart rate variability are associated with expression of short-term and long-term contextual and cued fear memories.

PubMed

Liu, Jun; Wei, Wei; Kuang, Hui; Zhao, Fang; Tsien, Joe Z

2013-01-01

Heart physiology is a highly useful indicator for measuring not only physical states, but also emotional changes in animals. Yet changes of heart rate variability during fear conditioning have not been systematically studied in mice. Here, we investigated changes in heart rate and heart rate variability in both short-term and long-term contextual and cued fear conditioning. We found that while fear conditioning could increase heart rate, the most significant change was the reduction in heart rate variability which could be further divided into two distinct stages: a highly rhythmic phase (stage-I) and a more variable phase (stage-II). We showed that the time duration of the stage-I rhythmic phase were sensitive enough to reflect the transition from short-term to long-term fear memories. Moreover, it could also detect fear extinction effect during the repeated tone recall. These results suggest that heart rate variability is a valuable physiological indicator for sensitively measuring the consolidation and expression of fear memories in mice.

Predicting nurses' use of healthcare technology using the technology acceptance model: an integrative review.

PubMed

Strudwick, Gillian

2015-05-01

The benefits of healthcare technologies can only be attained if nurses accept and intend to fully use them. One of the most common models utilized to understand user acceptance of technology is the Technology Acceptance Model. This model and modified versions of it have only recently been applied in the healthcare literature among nurse participants. An integrative literature review was conducted on this topic. Ovid/MEDLINE, PubMed, Google Scholar, and CINAHL were searched yielding a total of 982 references. Upon eliminating duplicates and applying the inclusion and exclusion criteria, the review included a total of four dissertations, three symposium proceedings, and 13 peer-reviewed journal articles. These documents were appraised and reviewed. The results show that a modified Technology Acceptance Model with added variables could provide a better explanation of nurses' acceptance of healthcare technology. These added variables to modified versions of the Technology Acceptance Model are discussed, and the studies' methodologies are critiqued. Limitations of the studies included in the integrative review are also examined.

Foundational Forces & Hidden Variables in Technology Commercialization

NASA Astrophysics Data System (ADS)

Barnett, Brandon

2011-03-01

The science of physics seems vastly different from the process of technology commercialization. Physics strives to understand our world through the experimental deduction of immutable laws and dependent variables and the resulting macro-scale phenomenon. In comparison, the~goal of business is to make a profit by addressing the needs, preferences, and whims of individuals in a market. It may seem that this environment is too dynamic to identify all the hidden variables and deduct the foundational forces that impact a business's ability to commercialize innovative technologies. One example of a business ``force'' is found in the semiconductor industry. In 1965, Intel co-founder Gordon Moore predicted that the number of transistors incorporated in a chip will approximately double every 24 months. Known as Moore's Law, this prediction has become the guiding principle for the semiconductor industry for the last 40 years. Of course, Moore's Law is not really a law of nature; rather it is the result of efforts by Intel and the entire semiconductor industry. A closer examination suggests that there are foundational principles of business that underlie the macro-scale phenomenon of Moore's Law. Principles of profitability, incentive, and strategic alignment have resulted in a coordinated influx of resources that has driven technologies to market, increasing the profitability of the semiconductor industry and optimizing the fitness of its participants. New innovations in technology are subject to these same principles. So, in addition to traditional market forces, these often unrecognized forces and variables create challenges for new technology commercialization. In this talk, I will draw from ethnographic research, complex adaptive theory, and industry data to suggest a framework with which to think about new technology commercialization. Intel's bio-silicon initiative provides a case study.

An Integrated Approach for the Monitoring of Brain and Autonomic Response of Children with Autism Spectrum Disorders during Treatment by Wearable Technologies

PubMed Central

Billeci, Lucia; Tonacci, Alessandro; Tartarisco, Gennaro; Narzisi, Antonio; Di Palma, Simone; Corda, Daniele; Baldus, Giovanni; Cruciani, Federico; Anzalone, Salvatore M.; Calderoni, Sara; Pioggia, Giovanni; Muratori, Filippo

2016-01-01

Autism Spectrum Disorders (ASD) are associated with physiological abnormalities, which are likely to contribute to the core symptoms of the condition. Wearable technologies can provide data in a semi-naturalistic setting, overcoming the limitations given by the constrained situations in which physiological signals are usually acquired. In this study an integrated system based on wearable technologies for the acquisition and analysis of neurophysiological and autonomic parameters during treatment is proposed and an application on five children with ASD is presented. Signals were acquired during a therapeutic session based on an imitation protocol in ASD children. Data were analyzed with the aim of extracting quantitative EEG (QEEG) features from EEG signals as well as heart rate and heart rate variability (HRV) from ECG. The system allowed evidencing changes in neurophysiological and autonomic response from the state of disengagement to the state of engagement of the children, evidencing a cognitive involvement in the children in the tasks proposed. The high grade of acceptability of the monitoring platform is promising for further development and implementation of the tool. In particular if the results of this feasibility study would be confirmed in a larger sample of subjects, the system proposed could be adopted in more naturalistic paradigms that allow real world stimuli to be incorporated into EEG/psychophysiological studies for the monitoring of the effect of the treatment and for the implementation of more individualized therapeutic programs. PMID:27445652

Rapid calibrated high-resolution hyperspectral imaging using tunable laser source

NASA Astrophysics Data System (ADS)

Nguyen, Lam K.; Margalith, Eli

2009-05-01

We present a novel hyperspectral imaging technique based on tunable laser technology. By replacing the broadband source and tunable filters of a typical NIR imaging instrument, several advantages are realized, including: high spectral resolution, highly variable field-of-views, fast scan-rates, high signal-to-noise ratio, and the ability to use optical fiber for efficient and flexible sample illumination. With this technique, high-resolution, calibrated hyperspectral images over the NIR range can be acquired in seconds. The performance of system features will be demonstrated on two example applications: detecting melamine contamination in wheat gluten and separating bovine protein from wheat protein in cattle feed.

Sigh rate and respiratory variability during mental load and sustained attention.

PubMed

Vlemincx, Elke; Taelman, Joachim; De Peuter, Steven; Van Diest, Ilse; Van den Bergh, Omer

2011-01-01

Spontaneous breathing consists of substantial correlated variability: Parameters characterizing a breath are correlated with parameters characterizing previous and future breaths. On the basis of dynamic system theory, negative emotion states are predicted to reduce correlated variability whereas sustained attention is expected to reduce total respiratory variability. Both are predicted to evoke sighing. To test this, respiratory variability and sighing were assessed during a baseline, stressful mental arithmetic task, nonstressful sustained attention task, and recovery in between tasks. For respiration rate (excluding sighs), reduced total variability was found during the attention task, whereas correlated variation was reduced during mental load. Sigh rate increased during mental load and during recovery from the attention task. It is concluded that mental load and task-related attention show specific patterns in respiratory variability and sigh rate. Copyright © 2010 Society for Psychophysiological Research.

Event triggered state estimation techniques for power systems with integrated variable energy resources.

PubMed

Francy, Reshma C; Farid, Amro M; Youcef-Toumi, Kamal

2015-05-01

For many decades, state estimation (SE) has been a critical technology for energy management systems utilized by power system operators. Over time, it has become a mature technology that provides an accurate representation of system state under fairly stable and well understood system operation. The integration of variable energy resources (VERs) such as wind and solar generation, however, introduces new fast frequency dynamics and uncertainties into the system. Furthermore, such renewable energy is often integrated into the distribution system thus requiring real-time monitoring all the way to the periphery of the power grid topology and not just the (central) transmission system. The conventional solution is two fold: solve the SE problem (1) at a faster rate in accordance with the newly added VER dynamics and (2) for the entire power grid topology including the transmission and distribution systems. Such an approach results in exponentially growing problem sets which need to be solver at faster rates. This work seeks to address these two simultaneous requirements and builds upon two recent SE methods which incorporate event-triggering such that the state estimator is only called in the case of considerable novelty in the evolution of the system state. The first method incorporates only event-triggering while the second adds the concept of tracking. Both SE methods are demonstrated on the standard IEEE 14-bus system and the results are observed for a specific bus for two difference scenarios: (1) a spike in the wind power injection and (2) ramp events with higher variability. Relative to traditional state estimation, the numerical case studies showed that the proposed methods can result in computational time reductions of 90%. These results were supported by a theoretical discussion of the computational complexity of three SE techniques. The work concludes that the proposed SE techniques demonstrate practical improvements to the computational complexity of classical state estimation. In such a way, state estimation can continue to support the necessary control actions to mitigate the imbalances resulting from the uncertainties in renewables. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

A Multifactor Approach to Research in Instructional Technology.

ERIC Educational Resources Information Center

Ragan, Tillman J.

In a field such as instructional design, explanations of educational outcomes must necessarily consider multiple input variables. To adequately understand the contribution made by the independent variables, it is helpful to have a visual conception of how the input variables interrelate. Two variable models are adequately represented by a two…

Co-Flow Hollow Cathode Technology

NASA Technical Reports Server (NTRS)

Hofer, Richard R.; Goebel, Dan M.

2011-01-01

Hall thrusters utilize identical hollow cathode technology as ion thrusters, yet must operate at much higher mass flow rates in order to efficiently couple to the bulk plasma discharge. Higher flow rates are necessary in order to provide enough neutral collisions to transport electrons across magnetic fields so that they can reach the discharge. This higher flow rate, however, has potential life-limiting implications for the operation of the cathode. A solution to the problem involves splitting the mass flow into the hollow cathode into two streams, the internal and external flows. The internal flow is fixed and set such that the neutral pressure in the cathode allows for a high utilization of the emitter surface area. The external flow is variable depending on the flow rate through the anode of the Hall thruster, but also has a minimum in order to suppress high-energy ion generation. In the co-flow hollow cathode, the cathode assembly is mounted on thruster centerline, inside the inner magnetic core of the thruster. An annular gas plenum is placed at the base of the cathode and propellant is fed throughout to produce an azimuthally symmetric flow of gas that evenly expands around the cathode keeper. This configuration maximizes propellant utilization and is not subject to erosion processes. External gas feeds have been considered in the past for ion thruster applications, but usually in the context of eliminating high energy ion production. This approach is adapted specifically for the Hall thruster and exploits the geometry of a Hall thruster to feed and focus the external flow without introducing significant new complexity to the thruster design.

IMPROVING BIOMASS LOGISTICS COST WITHIN AGRONOMIC SUSTAINABILITY CONSTRAINTS AND BIOMASS QUALITY TARGETS

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. Richard Hess; Kevin L. Kenney; Christopher T. Wright

Equipment manufacturers have made rapid improvements in biomass harvesting and handling equipment. These improvements have increased transportation and handling efficiencies due to higher biomass densities and reduced losses. Improvements in grinder efficiencies and capacity have reduced biomass grinding costs. Biomass collection efficiencies (the ratio of biomass collected to the amount available in the field) as high as 75% for crop residues and greater than 90% for perennial energy crops have also been demonstrated. However, as collection rates increase, the fraction of entrained soil in the biomass increases, and high biomass residue removal rates can violate agronomic sustainability limits. Advancements inmore » quantifying multi-factor sustainability limits to increase removal rate as guided by sustainable residue removal plans, and mitigating soil contamination through targeted removal rates based on soil type and residue type/fraction is allowing the use of new high efficiency harvesting equipment and methods. As another consideration, single pass harvesting and other technologies that improve harvesting costs cause biomass storage moisture management challenges, which challenges are further perturbed by annual variability in biomass moisture content. Monitoring, sampling, simulation, and analysis provide basis for moisture, time, and quality relationships in storage, which has allowed the development of moisture tolerant storage systems and best management processes that combine moisture content and time to accommodate baled storage of wet material based upon “shelf-life.” The key to improving biomass supply logistics costs has been developing the associated agronomic sustainability and biomass quality technologies and processes that allow the implementation of equipment engineering solutions.« less

Quality of information about success rates provided on assisted reproductive technology clinic websites in Australia and New Zealand.

PubMed

Hammarberg, Karin; Prentice, Tess; Purcell, Isabelle; Johnson, Louise

2018-06-01

Many factors influence the chance of having a baby with assisted reproductive technologies (ART). A 2016 Australian Competition and Consumer Commission (ACCC) investigation concluded that ART clinics needed to improve the quality of information they provide about chance of ART success. To evaluate changes in the quality of information about success rates provided on the websites of ART clinics in Australia and New Zealand before and after the ACCC investigation. Desktop audits of websites of ART clinics in Australia and New Zealand were conducted in 2016 and 2017 and available information about success rates was scored using a matrix with eight variables and a possible range of scores of 0-9. Of the 54 clinic websites identified in 2016, 32 had unique information and were eligible to be audited. Of these, 29 were also eligible to be audited in 2017. While there was a slight improvement in the mean score from 2016 to 2017 (4.93-5.28), this was not statistically significantly different. Of the 29 clinics, 14 had the same score on both occasions, 10 had a higher and five a lower information quality score in 2017. To allow people who consider ART to make informed decisions about treatment they need comprehensive and accurate information about what treatment entails and what the likely outcomes are. As measured by a scoring matrix, most ART clinics had not improved the quality of the information about success rates following the ACCC investigation. © 2017 The Royal Australian and New Zealand College of Obstetricians and Gynaecologists.

POWER-ENHANCED MULTIPLE DECISION FUNCTIONS CONTROLLING FAMILY-WISE ERROR AND FALSE DISCOVERY RATES.

PubMed

Peña, Edsel A; Habiger, Joshua D; Wu, Wensong

2011-02-01

Improved procedures, in terms of smaller missed discovery rates (MDR), for performing multiple hypotheses testing with weak and strong control of the family-wise error rate (FWER) or the false discovery rate (FDR) are developed and studied. The improvement over existing procedures such as the Šidák procedure for FWER control and the Benjamini-Hochberg (BH) procedure for FDR control is achieved by exploiting possible differences in the powers of the individual tests. Results signal the need to take into account the powers of the individual tests and to have multiple hypotheses decision functions which are not limited to simply using the individual p -values, as is the case, for example, with the Šidák, Bonferroni, or BH procedures. They also enhance understanding of the role of the powers of individual tests, or more precisely the receiver operating characteristic (ROC) functions of decision processes, in the search for better multiple hypotheses testing procedures. A decision-theoretic framework is utilized, and through auxiliary randomizers the procedures could be used with discrete or mixed-type data or with rank-based nonparametric tests. This is in contrast to existing p -value based procedures whose theoretical validity is contingent on each of these p -value statistics being stochastically equal to or greater than a standard uniform variable under the null hypothesis. Proposed procedures are relevant in the analysis of high-dimensional "large M , small n " data sets arising in the natural, physical, medical, economic and social sciences, whose generation and creation is accelerated by advances in high-throughput technology, notably, but not limited to, microarray technology.

Does filler database size influence identification accuracy?

PubMed

Bergold, Amanda N; Heaton, Paul

2018-06-01

Police departments increasingly use large photo databases to select lineup fillers using facial recognition software, but this technological shift's implications have been largely unexplored in eyewitness research. Database use, particularly if coupled with facial matching software, could enable lineup constructors to increase filler-suspect similarity and thus enhance eyewitness accuracy (Fitzgerald, Oriet, Price, & Charman, 2013). However, with a large pool of potential fillers, such technologies might theoretically produce lineup fillers too similar to the suspect (Fitzgerald, Oriet, & Price, 2015; Luus & Wells, 1991; Wells, Rydell, & Seelau, 1993). This research proposes a new factor-filler database size-as a lineup feature affecting eyewitness accuracy. In a facial recognition experiment, we select lineup fillers in a legally realistic manner using facial matching software applied to filler databases of 5,000, 25,000, and 125,000 photos, and find that larger databases are associated with a higher objective similarity rating between suspects and fillers and lower overall identification accuracy. In target present lineups, witnesses viewing lineups created from the larger databases were less likely to make correct identifications and more likely to select known innocent fillers. When the target was absent, database size was associated with a lower rate of correct rejections and a higher rate of filler identifications. Higher algorithmic similarity ratings were also associated with decreases in eyewitness identification accuracy. The results suggest that using facial matching software to select fillers from large photograph databases may reduce identification accuracy, and provides support for filler database size as a meaningful system variable. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Analyzing endocrine system conservation and evolution.

PubMed

Bonett, Ronald M

2016-08-01

Analyzing variation in rates of evolution can provide important insights into the factors that constrain trait evolution, as well as those that promote diversification. Metazoan endocrine systems exhibit apparent variation in evolutionary rates of their constituent components at multiple levels, yet relatively few studies have quantified these patterns and analyzed them in a phylogenetic context. This may be in part due to historical and current data limitations for many endocrine components and taxonomic groups. However, recent technological advancements such as high-throughput sequencing provide the opportunity to collect large-scale comparative data sets for even non-model species. Such ventures will produce a fertile data landscape for evolutionary analyses of nucleic acid and amino acid based endocrine components. Here I summarize evolutionary rate analyses that can be applied to categorical and continuous endocrine traits, and also those for nucleic acid and protein-based components. I emphasize analyses that could be used to test whether other variables (e.g., ecology, ontogenetic timing of expression, etc.) are related to patterns of rate variation and endocrine component diversification. The application of phylogenetic-based rate analyses to comparative endocrine data will greatly enhance our understanding of the factors that have shaped endocrine system evolution. Copyright © 2016 Elsevier Inc. All rights reserved.

Effectiveness of Drafting Models for Engineering Technology Students and Impacts on Spatial Visualization Ability: An Analysis and Consideration of Critical Variables

ERIC Educational Resources Information Center

Katsioloudis, Petros J.; Stefaniak, Jill E.

2018-01-01

Results from a number of studies indicate that the use of drafting models can positively influence the spatial visualization ability for engineering technology students. However, additional variables such as light, temperature, motion and color can play an important role but research provides inconsistent results. Considering this, a set of 5…

Modelling Facebook Usage among University Students in Thailand: The Role of Emotional Attachment in an Extended Technology Acceptance Model

ERIC Educational Resources Information Center

Teo, Timothy

2016-01-01

The aim of this study is to examine the factors that influenced the use of Facebook among university students. Using an extended technology acceptance model (TAM) with emotional attachment (EA) as an external variable, a sample of 498 students from a public-funded Thailand university were surveyed on their responses to five variables hypothesized…

Teaching Gene Technology in an Outreach Lab: Students' Assigned Cognitive Load Clusters and the Clusters' Relationships to Learner Characteristics, Laboratory Variables, and Cognitive Achievement

ERIC Educational Resources Information Center

Scharfenberg, Franz-Josef; Bogner, Franz X.

2013-01-01

This study classified students into different cognitive load (CL) groups by means of cluster analysis based on their experienced CL in a gene technology outreach lab which has instructionally been designed with regard to CL theory. The relationships of the identified student CL clusters to learner characteristics, laboratory variables, and…

Effect of Stimulation of Neurotransmitter Systems on Heart Rate Variability and β-Adrenergic Responsiveness of Erythrocytes in Outbred Rats.

PubMed

Kur'yanova, E V; Tryasuchev, A V; Stupin, V O; Teplyi, D L

2017-05-01

We studied heart rate variability and β-adrenergic responsiveness of erythrocytes and changes in these parameters in response to single administration of β-adrenoblocker propranolol (2 mg/kg) in outbred male rats against the background of activation of the noradrenergic, serotonergic, and dopaminergic neurotransmitter systems achieved by 4-fold injections maprotiline (10 mg/kg), 5-hydroxytryptophan (50 mg/kg) combined with fluoxetine (3 mg/kg), and L-DOPA (20 mg/kg) with amantadine (20 mg/kg), respectively. Stimulation of the noradrenergic system moderately enhanced the heart rhythm rigidity and β-adrenergic responsiveness of erythrocytes. In addition, it markedly augmented the moderating effect of subsequently administered propranolol on LF and VLF components in the heart rate variability and reversed the effect of propranolol on β-adrenergic responsiveness of erythrocytes. Stimulation of the serotonergic system dramatically decreased all components in the heart rate variability and pronouncedly enhanced β-adrenergic responsiveness of erythrocytes. Subsequent injection of propranolol slightly restored all components in the heart rate variability and decreased β-adrenergic responsiveness of erythrocytes to the control level. Stimulation of the dopaminergic system made the heart rate more rigid due to decrease of all components in the heart rate variability; in addition, it slightly but significantly enhanced β-adrenergic responsiveness of erythrocytes. Subsequent injection of propranolol produced no significant effects on all components in the heart rate variability and on β-adrenergic responsiveness of erythrocytes. Stimulation of noradrenergic, serotonergic, and dopaminergic neurotransmitter systems produced unidirectional and consorted effects on heart rate variability and β-adrenergic responsiveness of erythrocytes, although the magnitudes of these effects were different. Probably, the changes in the heart rate variability in rats with stimulated neurotransmitter systems results from modification of the cellular sensitivity in peripheral organs to adrenergic influences. However, the differences in the reactions to β-adrenoblocker attest to specificity of the mechanisms underlying the changes in membrane reception and adrenergic pathways in every experimental model employed in this study.

Reliability of the Parabola Approximation Method in Heart Rate Variability Analysis Using Low-Sampling-Rate Photoplethysmography.

PubMed

Baek, Hyun Jae; Shin, JaeWook; Jin, Gunwoo; Cho, Jaegeol

2017-10-24

Photoplethysmographic signals are useful for heart rate variability analysis in practical ambulatory applications. While reducing the sampling rate of signals is an important consideration for modern wearable devices that enable 24/7 continuous monitoring, there have not been many studies that have investigated how to compensate the low timing resolution of low-sampling-rate signals for accurate heart rate variability analysis. In this study, we utilized the parabola approximation method and measured it against the conventional cubic spline interpolation method for the time, frequency, and nonlinear domain variables of heart rate variability. For each parameter, the intra-class correlation, standard error of measurement, Bland-Altman 95% limits of agreement and root mean squared relative error were presented. Also, elapsed time taken to compute each interpolation algorithm was investigated. The results indicated that parabola approximation is a simple, fast, and accurate algorithm-based method for compensating the low timing resolution of pulse beat intervals. In addition, the method showed comparable performance with the conventional cubic spline interpolation method. Even though the absolute value of the heart rate variability variables calculated using a signal sampled at 20 Hz were not exactly matched with those calculated using a reference signal sampled at 250 Hz, the parabola approximation method remains a good interpolation method for assessing trends in HRV measurements for low-power wearable applications.

34 CFR 685.208 - Repayment plans.

Code of Federal Regulations, 2011 CFR

2011-07-01

... changes in the variable interest rate identified in § 685.202(a). (c) Standard repayment plan for Direct... variable interest rate identified in § 685.202(a). (e) Extended repayment plan for all Direct Loan... variable interest rate identified in § 685.202(a). (f) Graduated repayment plan for all Direct Loan...

34 CFR 685.208 - Repayment plans.

Code of Federal Regulations, 2012 CFR

2012-07-01

... changes in the variable interest rate identified in § 685.202(a). (c) Standard repayment plan for Direct... variable interest rate identified in § 685.202(a). (e) Extended repayment plan for all Direct Loan... variable interest rate identified in § 685.202(a). (f) Graduated repayment plan for all Direct Loan...

Yield response to variable rate irrigation in corn

USDA-ARS?s Scientific Manuscript database

To investigate the impact of variable rate irrigation on corn yield, twenty plots of corn were laid out under a center pivot variable rate irrigation (VRI) system in an experimental field near Stoneville, MS. The VRI system is equipped with five VRI zone control units, a global positioning system (G...

Model documentation renewable fuels module of the National Energy Modeling System

NASA Astrophysics Data System (ADS)

1995-06-01

This report documents the objectives, analytical approach, and design of the National Energy Modeling System (NEMS) Renewable Fuels Module (RFM) as it relates to the production of the 1995 Annual Energy Outlook (AEO95) forecasts. The report catalogs and describes modeling assumptions, computational methodologies, data inputs, and parameter estimation techniques. A number of offline analyses used in lieu of RFM modeling components are also described. The RFM consists of six analytical submodules that represent each of the major renewable energy resources -- wood, municipal solid waste (MSW), solar energy, wind energy, geothermal energy, and alcohol fuels. The RFM also reads in hydroelectric facility capacities and capacity factors from a data file for use by the NEMS Electricity Market Module (EMM). The purpose of the RFM is to define the technological, cost, and resource size characteristics of renewable energy technologies. These characteristics are used to compute a levelized cost to be competed against other similarly derived costs from other energy sources and technologies. The competition of these energy sources over the NEMS time horizon determines the market penetration of these renewable energy technologies. The characteristics include available energy capacity, capital costs, fixed operating costs, variable operating costs, capacity factor, heat rate, construction lead time, and fuel product price.

The Unintended Consequences of Health Information Technology Revisited.

PubMed

Coiera, E; Ash, J; Berg, M

2016-11-10

The introduction of health information technology into clinical settings is associated with unintended negative consequences, some with the potential to lead to error and patient harm. As adoption rates soar, the impact of these hazards will increase. Over the last decade, unintended consequences have received great attention in the medical informatics literature, and this paper seeks to identify the major themes that have emerged. Rich typologies of the causes of unintended consequences have been developed, along with a number of explanatory frameworks based on socio-technical systems theory. We however still have only limited data on the frequency and impact of these events, as most studies rely on data sets from incident reporting or patient chart reviews, rather than undertaking detailed observational studies. Such data are increasingly needed as more organizations implement health information technologies. When outcome studies have been done in different organizations, they reveal different outcomes for identical systems. From a theoretical perspective, recent advances in the emerging discipline of implementation science have much to offer in explaining the origin, and variability, of unintended consequences. The dynamic nature of health care service organizations, and the rapid development and adoption of health information technologies means that unintended consequences are unlikely to disappear, and we therefore must commit to developing robust systems to detect and manage them.

Slow Dynamics Model of Compressed Air Energy Storage and Battery Storage Technologies for Automatic Generation Control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krishnan, Venkat; Das, Trishna

Increasing variable generation penetration and the consequent increase in short-term variability makes energy storage technologies look attractive, especially in the ancillary market for providing frequency regulation services. This paper presents slow dynamics model for compressed air energy storage and battery storage technologies that can be used in automatic generation control studies to assess the system frequency response and quantify the benefits from storage technologies in providing regulation service. The paper also represents the slow dynamics model of the power system integrated with storage technologies in a complete state space form. The storage technologies have been integrated to the IEEE 24more » bus system with single area, and a comparative study of various solution strategies including transmission enhancement and combustion turbine have been performed in terms of generation cycling and frequency response performance metrics.« less

Analysis of user readiness toward ICT usage at small medium enterprise in south tangerang

NASA Astrophysics Data System (ADS)

Napitupulu, D.; Syafrullah, M.; Rahim, R.; Abdullah, D.; Setiawan, MI

2018-04-01

Utilization of Information and Communication Technology (ICT) is still relatively low in the level of SMEs due to various limitations ranging from access to capital, till the marketing network. ICT is present to provide the ability for SMEs in improving the benefits and competitive advantage of the organization. This study aims to determine the level of readiness of SMEs in utilizing technology, especially ICT. The methodology used is a survey to see the technology readiness of 107 SMEs in South Tangerang selected by purposive sampling. The approach used is TRI (Technology Readiness Index) which is the individual perception of technology based on four criteria that is optimism, innovativeness, discomfort and insecurity. The results showed that the optimism and innovativeness variables significantly positively influence the technology readiness while the variables of discomfort and insecurity also significantly positively influence the readiness of ICT.

A life cycle assessment and economic analysis of the Scum-to-Biodiesel technology in wastewater treatment plants.

PubMed

Mu, Dongyan; Addy, Min; Anderson, Erik; Chen, Paul; Ruan, Roger

2016-03-01

This study used life cycle assessment and technical economic analysis tools in evaluating a novel Scum-to-Biodiesel technology and compares the technology with scum digestion and combustion processes. The key variables that control environmental and economic performance are identified and discussed. The results show that all impacts examined for the Scum-to-Biodiesel technology are below zero indicating significant environmental benefits could be drawn from it. Of the three technologies examined, the Scum-to-Biodiesel technology has the best environmental performance in fossil fuel depletion, GHG emissions, and eutrophication, whereas combustion has the best performance on acidification. Of all process inputs assessed, process heat, glycerol, and methanol uses had the highest impacts, much more than any other inputs considered. The Scum-to-Biodiesel technology also makes higher revenue than other technologies. The diesel price is a key variable for its economic performance. The research demonstrates the feasibility and benefits in developing Scum-to-Biodiesel technology in wastewater treatment facilities. Copyright © 2015 Elsevier Ltd. All rights reserved.

Impact of Healthcare Information Technology on Nursing Practice.

PubMed

Piscotty, Ronald J; Kalisch, Beatrice; Gracey-Thomas, Angel

2015-07-01

To report additional mediation findings from a descriptive cross sectional study to examine if nurses' perceptions of the impact of healthcare information technology on their practice mediates the relationship between electronic nursing care reminder use and missed nursing care. The study used a descriptive design. The sample (N = 165) was composed of registered nurses working on acute care hospital units. The sample was obtained from a large teaching hospital in Southeast Michigan in the fall of 2012. All eligible nursing units (n = 19) were included. The MISSCARE Survey, Nursing Care Reminders Usage Survey, and the Impact of Healthcare Information Technology Scale were used to collect data to test for mediation. Mediation was tested using the method described by Baron and Kenny. Multiple regression equations were used to analyze the data to determine if mediation occurred between the variables. Missed nursing care, the outcome variable, was regressed on the predictor variable, reminder usage, and the mediator variable impact of technology on nursing practice. The impact of healthcare information technology (IHIT) on nursing practice negatively affected missed nursing care (t = -4.12, p < .001), explaining 9.8% of variance in missed nursing care. With IHIT present, the predictor (reminder usage) was no longer significant (t = -.70, p = .48). Thus, the reduced direct association between reminder usage and missed nursing care when IHIT was in the model supported the hypothesis that IHIT was at least one of the mediators in the relationship between reminder usage and missed nursing care. The perceptions of the impact of healthcare information technology mediates the relationship between nursing care reminder use and missed nursing care. The findings are beneficial to the advancement of healthcare technology in that designers of healthcare information technology systems need to keep in mind that perceptions regarding impacts of the technology will influence usage. Many times, information technology systems are not designed to match the workflow of nurses. Systems built with redundant or impertinent reminders may be ignored. System designers must study which reminders nurses find most useful and which reminders result in the best quality outcomes. © 2015 Sigma Theta Tau International.

Explicating the Influences That Explain Intention to Use Technology among English Teachers in China

ERIC Educational Resources Information Center

Teo, Timothy; Huang, Fang; Hoi, Cathy Ka Weng

2018-01-01

Given the paradox between pervasive promotion of technology use in English teaching and lack of studies about teachers' technology acceptance in China, this study aims to examine intentions of English teachers in China to use technology in their classroom teaching. Based on the technology acceptance model, eight variables including perceived…

TPACK Competencies and Technology Integration Self-Efficacy Perceptions of Pre-Service Teachers

ERIC Educational Resources Information Center

Keser, Hafize; Karaoglan Yilmaz, Fatma Gizem; Yilmaz, Ramazan

2015-01-01

This study compared the technological pedagogical content knowledge (TPACK) competency of pre-service teachers with their self-efficacy perception towards technology integration, based on various variables; and the correlation between their TPACK competencies and self-efficacy perceptions towards technology integration were examined. The study…

Steps toward a Technology for the Diffusion of Innovations.

ERIC Educational Resources Information Center

Stolz, Stephanie B.

Research-based technologies for solving problems currently exist but are not being widely implemented. Although user variables, program effectiveness, and political considerations have been documented as correlates of implementation, general non-implementation of the technology still exists, due to a lack of methods. A technology of dissemination…

The Acceptance of Computer Technology by Teachers in Early Childhood Education

ERIC Educational Resources Information Center

Jeong, Hye In; Kim, Yeolib

2017-01-01

This study investigated kindergarten teachers' decision-making process regarding the acceptance of computer technology. We incorporated the Technology Acceptance Model framework, in addition to computer self-efficacy, subjective norm, and personal innovativeness in education technology as external variables. The data were obtained from 160…

Assessing the biophysical and socio-economic potential of Sustainable Land Management and Water Harvesting Technologies for rainfed agriculture across semi-arid Africa.

NASA Astrophysics Data System (ADS)

Irvine, Brian; Fleskens, Luuk; Kirkby, Mike

2016-04-01

Stakeholders in recent EU projects identified soil erosion as the most frequent driver of land degradation in semi-arid environments. In a number of sites, historic land management and rainfall variability are recognised as contributing to the serious environmental impact. In order to consider the potential of sustainable land management and water harvesting techniques stakeholders and study sites from the projects selected and trialled both local technologies and promising technologies reported from other sites . The combined PESERA and DESMICE modelling approach considered the regional effects of the technologies in combating desertification both in environmental and socio-economical terms. Initial analysis was based on long term average climate data with the model run to equilibrium. Current analysis, primarily based on the WAHARA study sites considers rainfall variability more explicitly in time series mode. The PESERA-DESMICE approach considers the difference between a baseline scenario and a (water harvesting) technology scenario, typically, in terms of productivity, financial viability and scope for reducing erosion risk. A series of 50 year rainfall realisations are generated from observed data to capture a full range of the climatic variability. Each realisation provides a unique time-series of rainfall and through modelling can provide a simulated time-series of crop yield and erosion risk for both baseline conditions and technology scenarios. Subsequent realisations and model simulations add to an envelope of the potential crop yield and cost-benefit relations. The development of such envelopes helps express the agricultural and erosional risk associated with climate variability and the potential for conservation measures to absorb the risk, highlighting the probability of achieving a given crop yield or erosion limit. Information that can directly inform or influence the local adoption of conservation measures under the climatic variability in semi-arid areas

Effects of Stopping Ions and LET Fluctuations on Soft Error Rate Prediction.

DOE PAGES

Weeden-Wright, S. L.; King, Michael Patrick; Hooten, N. C.; ...

2015-02-01

Variability in energy deposition from stopping ions and LET fluctuations is quantified for specific radiation environments. When compared to predictions using average LET via CREME96, LET fluctuations lead to an order-of-magnitude difference in effective flux and a nearly 4x decrease in predicted soft error rate (SER) in an example calculation performed on a commercial 65 nm SRAM. The large LET fluctuations reported here will be even greater for the smaller sensitive volumes that are characteristic of highly scaled technologies. End-of-range effects of stopping ions do not lead to significant inaccuracies in radiation environments with low solar activity unless the sensitivevolumemore » thickness is 100 μm or greater. In contrast, end-of-range effects for stopping ions lead to significant inaccuracies for sensitive- volume thicknesses less than 10 μm in radiation environments with high solar activity.« less

Variable pitch fan system for NASA/Navy research and technology aircraft

NASA Technical Reports Server (NTRS)

Ryan, W. P.; Black, D. M.; Yates, A. F.

1977-01-01

Preliminary design of a shaft driven, variable-pitch lift fan and lift-cruise fan was conducted for a V/STOL Research and Technology Aircraft. The lift fan and lift-cruise fan employed a common rotor of 157.5 cm diameter, 1.18 pressure ratio variable-pitch fan designed to operate at a rotor-tip speed of 284 mps. Fan performance maps were prepared and detailed aerodynamic characteristics were established. Cost/weight/risk trade studies were conducted for the blade and fan case. Structural sizing was conducted for major components and weights determined for both the lift and lift-cruise fans.

Deep infection in total hip arthroplasty

PubMed Central

Hamilton, Henry; Jamieson, John

2008-01-01

Objective To report on a 30-year prospective study of deep infection in 1993 consecutive total hip arthroplasties performed by a single surgeon. Methods The relations of numerous variables to the incidence of deep infection were studied. Results The cumulative infection rate after the index total hip arthroplasties rose from 0.8% at 2 years to 1.4% at 20 years; 9.6% of the index operations required further surgery. When infections attributed to these secondary procedures were included, the infection rate rose from 0.9% at 2 years to 2% at 20 years. Although the usual variables increased the incidence of infection, the significant and most precise predictors of infection were radiologic diagnoses of upper pole grade III and protrusio acetabuli, an elevated erythrocyte sedimentation rate, alcoholism and units of blood transfused. Conclusion From 2–20 years, the incidence of deep infection doubled. Preoperative recognition of the first 4 risk factors permits the use of additional prophylactic measures. Spinal or epidural anesthesia reduced the units of blood transfused (the fifth risk factor) and, hence, the risk of infection. Although most deep infections are seeded while the wound is open, there are many possible postoperative causes. In this study, fewer than one-third of the infections that presented after 2 years were related to hematogenous spread. The efficacy of clean air technology was supported, and it is recommended that all measures that may reduce the incidence of deep infection be employed. PMID:18377751

Sperm function and assisted reproduction technology

PubMed Central

MAAß, GESA; BÖDEKER, ROLF‐HASSO; SCHEIBELHUT, CHRISTINE; STALF, THOMAS; MEHNERT, CLAAS; SCHUPPE, HANS‐CHRISTIAN; JUNG, ANDREAS; SCHILL, WOLF‐BERNHARD

2005-01-01

The evaluation of different functional sperm parameters has become a tool in andrological diagnosis. These assays determine the sperm's capability to fertilize an oocyte. It also appears that sperm functions and semen parameters are interrelated and interdependent. Therefore, the question arose whether a given laboratory test or a battery of tests can predict the outcome in in vitro fertilization (IVF). One‐hundred and sixty‐one patients who underwent an IVF treatment were selected from a database of 4178 patients who had been examined for male infertility 3 months before or after IVF. Sperm concentration, motility, acrosin activity, acrosome reaction, sperm morphology, maternal age, number of transferred embryos, embryo score, fertilization rate and pregnancy rate were determined. In addition, logistic regression models to describe fertilization rate and pregnancy were developed. All the parameters in the models were dichotomized and intra‐ and interindividual variability of the parameters were assessed. Although the sperm parameters showed good correlations with IVF when correlated separately, the only essential parameter in the multivariate model was morphology. The enormous intra‐ and interindividual variability of the values was striking. In conclusion, our data indicate that the andrological status at the end of the respective treatment does not necessarily represent the status at the time of IVF. Despite a relatively low correlation coefficient in the logistic regression model, it appears that among the parameters tested, the most reliable parameter to predict fertilization is normal sperm morphology. (Reprod Med Biol 2005; 4: 7–30) PMID:29699207

Assessment, evaluation, and testing of technologies for environmental restoration, decontamination, and decommissioning and high level waste management. Progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Uzochukwu, G.A.

1997-12-31

Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration, decontamination and decommissioning, and high-level waste management objectives are being assessed and evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objectives of the environmental restoration, decontamination and decommissioning, and high-level waste management effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formattedmore » and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites.« less

In vivo efficacy and bioavailability of lumefantrine: Evaluating the application of Pheroid technology.

PubMed

du Plessis, Lissinda H; Govender, Katya; Denti, Paolo; Wiesner, Lubbe

2015-11-01

The oral absorption of compounds with low aqueous solubility, such as lumefantrine, is typically limited by the dissolution rate in the gastro-intestinal tract, resulting in erratic absorption and highly variable bioavailability. In previous studies we reported on the ability of Pheroid vesicles to improve the bioavailability of poorly soluble drugs. In the present study a Pro-Pheroid formulation, a modification of the previous formulation, was applied to improve the solubility of lumefantrine after oral administration and compared to lumefantrine in DMSO:water (1:9 v/v) solution (reference solution). A bioavailability study of lumefantrine was conducted in a mouse model in fed and fasted states. When using the reference solution, the bioavailability of the lumefantrine heavily depended on food intake, resulting in a 2.7 times higher bioavailability in the fed state when compared to the fasted state. It also showed large between-subject variability. When formulated using Pro-Pheroid, the bioavailability of lumefantrine was 3.5 times higher as compared to lumefantrine in the reference solution and fasting state. Pro-Pheroid also dramatically reduced the effects of food intake and the between-subject variability for bioavailability observed with the reference. In vivo antimalarial efficacy was also evaluated with lumefantrine formulated using Pro-Pheroid technology compared to the reference solution. The results indicated that lumefantrine in Pro-Pheroid formulation exhibited improved antimalarial activity in vitro by 46.8%, when compared to the reference. The results of the Peters' 4-day suppressive test indicated no significant difference in the efficacy or mean survival time of the mice in the Pro-Pheroid formulation and reference test groups when compared to the positive control, chloroquine. These findings suggest that using the Pro-Pheroid formulation improves the bioavailability of lumefantrine, eliminates the food effect associated with lumefantrine as well as significantly reduces the between subject variability in bioavailability when compared to the reference solution. Copyright © 2015 Elsevier B.V. All rights reserved.

[Body composition and heart rate variability in patients with chronic obstructive pulmonary disease pulmonary rehabilitation candidates].

PubMed

Curilem Gatica, Cristian; Almagià Flores, Atilio; Yuing Farías, Tuillang; Rodríguez Rodríguez, Fernando

2014-07-01

Body composition is a non-invasive method, which gives us information about the distribution of tissues in the body structure, it is also an indicator of the risk of mortality in patients with chronic obstructive pulmonary disease. The heart rate variability is a technique that gives us information of autonomic physiological condition, being recognized as an indicator which is decreased in a number of diseases. The purpose of this study was to assess body composition and heart rate variability. The methodology used is that of Debora Kerr (1988) endorsed by the International Society for advances in Cineantropometría for body composition and heart rate variability of the guidelines described by the American Heart Association (1996). Roscraff equipment, caliper Slimguide and watch Polar RS 800CX was used. , BMI 26.7 ± 3.9 kg / m²; Muscle Mass 26.1 ± 6.3 kg ; Bone Mass 1.3 kg ± 8.1 76 ± 9.9 years Age : 14 candidates for pulmonary rehabilitation patients were evaluated , Adipose mass 16.4 ± 3.6 kg ; FEV1 54 ± 14%. Increased waist circumference and waist hip ratio was associated with a lower overall heart rate variability. The bone component was positively related to the variability of heart rate and patients with higher forced expiratory volume in one second had lower high frequency component in heart rate variability. In these patients, the heart rate variability is reduced globally and is associated with cardiovascular risk parameters. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Nurse Knowledge, Work Environment, and Turnover in Highly Specialized Pediatric End-of-Life Care.

PubMed

Lindley, Lisa C; Cozad, Melanie J

2017-07-01

To examine the relationship between nurse knowledge, work environment, and registered nurse (RN) turnover in perinatal hospice and palliative care organizations. Using nurse intellectual capital theory, a multivariate analysis was conducted with 2007 National Home and Hospice Care Survey data. Perinatal hospice and palliative care organizations experienced a 5% turnover rate. The professional experience of advanced practice nurses (APNs) was significantly related to turnover among RNs (β = -.032, P < .05). Compared to organizations with no APNs professional experience, clinical nurse specialists and nurse practitioners significantly reduced RN turnover by 3 percentage points. No other nurse knowledge or work environment variables were associated with RN turnover. Several of the control variables were also associated with RN turnover in the study; Organizations serving micropolitan (β = -.041, P < .05) and rural areas (β = -.037, P < .05) had lower RN turnover compared to urban areas. Organizations with a technology climate where nurses used electronic medical records had a higher turnover rate than those without (β = .036, P < .05). The findings revealed that advanced professional experience in the form of APNs was associated with reductions in RN turnover. This suggests that having a clinical nurse specialist or nurse practitioner on staff may provide knowledge and experience to other RNs, creating stability within the organization.

Simulation of a 20-ton LiBr/H{sub 2}O absorption cooling system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wardono, B.; Nelson, R.M.

The possibility of using solar energy as the main heat input for cooling systems has led to several studies of available cooling technologies that use solar energy. The results show that double-effect absorption cooling systems give relatively high performance. To further study absorption cooling systems, a computer code was developed for a double-effect lithium bromide/water (LiBr/H{sub 2}O) absorption system. To evaluate the performance, two objective functions were developed including the coefficient of performance (COP) and the system cost. Based on the system cost, an optimization to find the minimum cost was performed to determine the nominal heat transfer areas ofmore » each heat exchanger. The nominal values of other system variables, such as the mass flow rates and inlet temperatures of the hot water, cooling water, and chilled water, are specified as commonly used values for commercial machines. The results of the optimization show that there are optimum heat transfer areas. In this study, hot water is used as the main energy input. Using a constant load of 20 tons cooling capacity, the effects of various variables including the heat transfer ares, mass flow rates, and inlet temperatures of hot water, cooling water, and chilled water are presented.« less

Crossing the Technology Adoption Chasm: Implications for DoD

DTIC Science & Technology

2008-06-30

technologies (where, given uncertainty of evaluation, adoption is driven by mimicry processes) and those technologies that exhibit network...Total Capital per Farm Dependent Variable = Long-run Equilibrium Percentage of Acreage Planted to Hybrid Seed Average Corn Acre per

34 CFR 685.208 - Repayment plans.

Code of Federal Regulations, 2013 CFR

2013-07-01

... amount may be adjusted to reflect changes in the variable interest rate identified in § 685.202(a). (c... be adjusted to reflect changes in the variable interest rate identified in § 685.202(a). (e) Extended... adjusted to reflect changes in the variable interest rate identified in § 685.202(a). (f) Graduated...

34 CFR 685.208 - Repayment plans.

Code of Federal Regulations, 2014 CFR

2014-07-01

... amount may be adjusted to reflect changes in the variable interest rate identified in § 685.202(a). (c... be adjusted to reflect changes in the variable interest rate identified in § 685.202(a). (e) Extended... adjusted to reflect changes in the variable interest rate identified in § 685.202(a). (f) Graduated...

Mathematical models of water application for a variable rate irrigating hill-seeder

USDA-ARS?s Scientific Manuscript database

A variable rate irrigating hill-seeder can adjust water application automatically according to the difference in soil moisture content in the field to alleviate drought and save water. Two key problems to realize variable rate water application are how to determine the right amount of water for the ...

Mathematic models of water application for a variable rate irrigating hill-seeder

USDA-ARS?s Scientific Manuscript database

A variable rate irrigating hill-seeder can adjust water application automatically according to the difference in soil moisture content in the field to alleviate drought and save water. Two key problems to realize variable rate water application are how to determine the right amount of water for the ...

Dynamic rupture modeling with laboratory-derived constitutive relations

USGS Publications Warehouse

Okubo, P.G.

1989-01-01

A laboratory-derived state variable friction constitutive relation is used in the numerical simulation of the dynamic growth of an in-plane or mode II shear crack. According to this formulation, originally presented by J.H. Dieterich, frictional resistance varies with the logarithm of the slip rate and with the logarithm of the frictional state variable as identified by A.L. Ruina. Under conditions of steady sliding, the state variable is proportional to (slip rate)-1. Following suddenly introduced increases in slip rate, the rate and state dependencies combine to produce behavior which resembles slip weakening. When rupture nucleation is artificially forced at fixed rupture velocity, rupture models calculated with the state variable friction in a uniformly distributed initial stress field closely resemble earlier rupture models calculated with a slip weakening fault constitutive relation. Model calculations suggest that dynamic rupture following a state variable friction relation is similar to that following a simpler fault slip weakening law. However, when modeling the full cycle of fault motions, rate-dependent frictional responses included in the state variable formulation are important at low slip rates associated with rupture nucleation. -from Author

iHeartLift: a closed loop system with bio-feedback that uses music tempo variability to improve heart rate variability.

PubMed

Ho, Thomas C T; Chen, Xiang

2011-01-01

"Musica delenit bestiam feram" translates into "Music soothes the savage beast". There is a hidden truth in this ancient quip passed down from generations. Besides soothing the heart, it also incites the heart to a healthier level of heart rate variability (HRV). In this paper, an approach to use and test music and biofeedback to increase the heart rate variability for people facing daily stress is discussed. By determining the music tempo variability (MTV) of a piece of music and current heart rate variability, iHeartLift is able to compare the 2 trends and locate a musical piece that is suited to increase the user's heart rate variability to a healthier level. With biofeedback, the 2 trends are continuously compared in real-time and the musical piece is changed in accordance with the current comparisons. A study was conducted and it was generally found that HRV can be uplifted by music regardless of language and meaning of musical lyrics but with limitations to musical genre.

Impaired heart rate variability and altered cardiac sympathovagal balance after antidepressant overdose.

PubMed

Waring, W S; Rhee, J Y; Bateman, D N; Leggett, G E; Jamie, H

2008-11-01

Antidepressant overdose may be associated with significant cardiotoxicity, and recent data have shown that acute toxic effects are associated with impaired heart rate variability. This study was designed to examine the feasibility of non-invasive heart rate variability recording in patients that present to hospital after deliberate antidepressant ingestion. This was a prospective study of 72 consecutive patients attending the Emergency Department after deliberate antidepressant overdose and 72 age-matched patients that ingested paracetamol, as a control group. Single time-point continuous electrocardiographic recordings were used to allow spectral analyses of heart rate variability determined in low-frequency (LF) and high-frequency (HF) domains. The LF:HF ratio was used to represent overall sympathovagal cardiac activity. Antidepressant overdose was associated with reduced overall heart rate variability: 1329 vs. 2018 ms(2) (P = 0.0239 by Mann-Whitney test). Variability in the LF domain was higher (64.8 vs. 49.8, P = 0.0006), whereas that in the HF domain was lower (24.3 vs. 36.4, P = 0.0001), and the LF:HF ratio was higher in the antidepressant group (2.4 vs. 1.2, P = 0.0003). Antidepressant overdose is associated with impaired heart rate variability in a pattern consistent with excess cardiac sympathetic activity. Further work is required to establish the significance of these findings and to explore whether the impairment of heart rate variability may be used to predict the development of arrhythmia in this patient group.

Integrating Nuclear and Renewable Electricity in a Low-Carbon World: MIT-Japan Future of Nuclear Power Studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haratyk, Geoffrey; Komiyama, Ryoichi; Forsberg, Charles

Affordable reliable energy made possible a large middle class in the industrial world. Concerns about climate change require a transition to nuclear, wind, and solar—but these energy sources in current forms do not have the capability to meet the requirements for variable affordable energy. Researchers from the Massachusetts Institute of Technology, the University of Tokyo, the Tokyo Institute of Technology and the Institute for Energy Economics are undertaking a series of studies to address how to make this transition to a low carbon world. Three areas are being investigated. The first area is the development of electricity grid models tomore » understand the impacts of different choices of technologies and different limits on greenhouse gas emissions. The second area is the development of technologies to enable variable electricity to the grid while capital-intensive nuclear, wind and solar generating plants operate at full capacity to minimize costs. Technologies to enable meeting variable electricity demand while operating plants at high-capacity factors include use of heat and hydrogen storage. The third area is the development of electricity market rules to enable transition to a low-carbon grid.« less

Behavioral variability in an evolutionary theory of behavior dynamics.

PubMed

Popa, Andrei; McDowell, J J

2016-03-01

McDowell's evolutionary theory of behavior dynamics (McDowell, 2004) instantiates populations of behaviors (abstractly represented by integers) that evolve under the selection pressure of the environment in the form of positive reinforcement. Each generation gives rise to the next via low-level Darwinian processes of selection, recombination, and mutation. The emergent patterns can be analyzed and compared to those produced by biological organisms. The purpose of this project was to explore the effects of high mutation rates on behavioral variability in environments that arranged different reinforcer rates and magnitudes. Behavioral variability increased with the rate of mutation. High reinforcer rates and magnitudes reduced these effects; low reinforcer rates and magnitudes augmented them. These results are in agreement with live-organism research on behavioral variability. Various combinations of mutation rates, reinforcer rates, and reinforcer magnitudes produced similar high-level outcomes (equifinality). These findings suggest that the independent variables that describe an experimental condition interact; that is, they do not influence behavior independently. These conclusions have implications for the interpretation of high levels of variability, mathematical undermatching, and the matching theory. The last part of the discussion centers on a potential biological counterpart for the rate of mutation, namely spontaneous fluctuations in the brain's default mode network. © 2016 Society for the Experimental Analysis of Behavior.

Field portable low temperature porous layer open tubular cryoadsorption headspace sampling and analysis part II: Applications.

PubMed

Harries, Megan; Bukovsky-Reyes, Santiago; Bruno, Thomas J

2016-01-15

This paper details the sampling methods used with the field portable porous layer open tubular cryoadsorption (PLOT-cryo) approach, described in Part I of this two-part series, applied to several analytes of interest. We conducted tests with coumarin and 2,4,6-trinitrotoluene (two solutes that were used in initial development of PLOT-cryo technology), naphthalene, aviation turbine kerosene, and diesel fuel, on a variety of matrices and test beds. We demonstrated that these analytes can be easily detected and reliably identified using the portable unit for analyte collection. By leveraging efficiency-boosting temperature control and the high flow rate multiple capillary wafer, very short collection times (as low as 3s) yielded accurate detection. For diesel fuel spiked on glass beads, we determined a method detection limit below 1 ppm. We observed greater variability among separate samples analyzed with the portable unit than previously documented in work using the laboratory-based PLOT-cryo technology. We identify three likely sources that may help explain the additional variation: the use of a compressed air source to generate suction, matrix geometry, and variability in the local vapor concentration around the sampling probe as solute depletion occurs both locally around the probe and in the test bed as a whole. This field-portable adaptation of the PLOT-cryo approach has numerous and diverse potential applications. Published by Elsevier B.V.

Field Portable Low Temperature Porous Layer Open Tubular Cryoadsorption Headspace Sampling and Analysis Part II: Applications*

PubMed Central

Harries, Megan; Bukovsky-Reyes, Santiago; Bruno, Thomas J.

2016-01-01

This paper details the sampling methods used with the field portable porous layer open tubular cryoadsorption (PLOT-cryo) approach, described in Part I of this two-part series, applied to several analytes of interest. We conducted tests with coumarin and 2,4,6-trinitrotoluene (two solutes that were used in initial development of PLOT-cryo technology), naphthalene, aviation turbine kerosene, and diesel fuel, on a variety of matrices and test beds. We demonstrated that these analytes can be easily detected and reliably identified using the portable unit for analyte collection. By leveraging efficiency-boosting temperature control and the high flow rate multiple capillary wafer, very short collection times (as low as 3 s) yielded accurate detection. For diesel fuel spiked on glass beads, we determined a method detection limit below 1 ppm. We observed greater variability among separate samples analyzed with the portable unit than previously documented in work using the laboratory-based PLOT-cryo technology. We identify three likely sources that may help explain the additional variation: the use of a compressed air source to generate suction, matrix geometry, and variability in the local vapor concentration around the sampling probe as solute depletion occurs both locally around the probe and in the test bed as a whole. This field-portable adaptation of the PLOT-cryo approach has numerous and diverse potential applications. PMID:26726934

Teleconsultations by primary care physicians of Belo Horizonte: challenges in the diffusion of innovation.

PubMed

Ruas, Sandra Silva Mitraud; Assunção, Ada Ávila

2013-05-01

Telemedicine is the provision of health services by professionals who use information and communications technology in the exchange of information for the diagnosis, treatment, and prevention of diseases. Since 2004, the Municipal Department of Health of Belo Horizonte, MG, Brazil, has been implementing telehealth initiatives with the goal of increasing the ability of primary care providers to resolve problems by providing them with clinical support and with continuing education using information and communications technologies. This study characterized the primary care physicians who used the Belo Horizonte telehealth store-and-forward teleconsultation. A descriptive study was conducted of the frequency of use of store-and-forward teleconsultation and characteristics of physician users. We analyzed 737 store-and-forward teleconsultations in the period 2006-2010. The number of store-and-forward teleconsultations grew from 2006 to 2009, and 85 physicians used the tool. The physician users were predominantly women, specialists in family and community medicine, those employed under a stable contract, and older and with more time in the profession and in public service. The adoption rate was 6.0%, 4.8%, and 1.2% in 2008, 2009, and 2010, respectively. Context variables and individual variables may be influencing the adoption of store-and-forward teleconsultation in Belo Horizonte. It would be useful to further study the factors that constitute barriers to using teleconsultations and to improve the training in use of the tool.

Understanding the Changes in Global Crop Yields Through Changes in Climate and Technology

NASA Astrophysics Data System (ADS)

Najafi, Ehsan; Devineni, Naresh; Khanbilvardi, Reza M.; Kogan, Felix

2018-03-01

During the last few decades, the global agricultural production has risen and technology enhancement is still contributing to yield growth. However, population growth, water crisis, deforestation, and climate change threaten the global food security. An understanding of the variables that caused past changes in crop yields can help improve future crop prediction models. In this article, we present a comprehensive global analysis of the changes in the crop yields and how they relate to different large-scale and regional climate variables, climate change variables and technology in a unified framework. A new multilevel model for yield prediction at the country level is developed and demonstrated. The structural relationships between average yield and climate attributes as well as trends are estimated simultaneously. All countries are modeled in a single multilevel model with partial pooling to automatically group and reduce estimation uncertainties. El Niño-southern oscillation (ENSO), Palmer drought severity index (PDSI), geopotential height anomalies (GPH), historical carbon dioxide (CO2) concentration and country-based time series of GDP per capita as an approximation of technology measurement are used as predictors to estimate annual agricultural crop yields for each country from 1961 to 2013. Results indicate that these variables can explain the variability in historical crop yields for most of the countries and the model performs well under out-of-sample verifications. While some countries were not generally affected by climatic factors, PDSI and GPH acted both positively and negatively in different regions for crop yields in many countries.

Capital financing options for group practices.

PubMed

Galtney, B

2000-05-01

Group practices that are looking for capital partners need to demonstrate that they have the necessary management capability to operate a successful business capable of repaying the debt. Two basic types of debt financing are available to group practices: fixed-rate financing and variable-rate financing. Fixed-rate financing, the more common method, involves borrowing a specific amount of money and then paying off the debt in principal-and-interest payments, much like a fixed-rate mortgage. Variable-rate financing, on the other hand, involves obtaining a letter of credit from the lender itself or independent guarantor to secure a loan. The variable-rate method is more efficient and flexible, because the notes secured by the letter of credit can be rated independently and sold into public capital markets like short-term, variable-rate paper. Both types of financing can require the personal guarantee of all physicians in the group practice.

Simulated maximum likelihood method for estimating kinetic rates in gene expression.

PubMed

Tian, Tianhai; Xu, Songlin; Gao, Junbin; Burrage, Kevin

2007-01-01

Kinetic rate in gene expression is a key measurement of the stability of gene products and gives important information for the reconstruction of genetic regulatory networks. Recent developments in experimental technologies have made it possible to measure the numbers of transcripts and protein molecules in single cells. Although estimation methods based on deterministic models have been proposed aimed at evaluating kinetic rates from experimental observations, these methods cannot tackle noise in gene expression that may arise from discrete processes of gene expression, small numbers of mRNA transcript, fluctuations in the activity of transcriptional factors and variability in the experimental environment. In this paper, we develop effective methods for estimating kinetic rates in genetic regulatory networks. The simulated maximum likelihood method is used to evaluate parameters in stochastic models described by either stochastic differential equations or discrete biochemical reactions. Different types of non-parametric density functions are used to measure the transitional probability of experimental observations. For stochastic models described by biochemical reactions, we propose to use the simulated frequency distribution to evaluate the transitional density based on the discrete nature of stochastic simulations. The genetic optimization algorithm is used as an efficient tool to search for optimal reaction rates. Numerical results indicate that the proposed methods can give robust estimations of kinetic rates with good accuracy.

The Influence Of Team Rating On Running Performance In Elite Gaelic Football.

PubMed

Mangan, Shane; Malone, Shane; Ryan, Martin; Gahan, Jason Mc; Warne, Joe; Martin, Denise; O'Neill, Cian; Burns, Con; Collins, Kieran

2017-11-06

It is currently unknown how team rating influences running performance in Gaelic football. GPS technologies were used to quantify match-running performance within 5 elite Gaelic football teams over a period of 5 years (2012-2016). In total 780 player data sets were collected over 95 matches. Running performance variables included total distance, high-speed distance (≥17 km h) and the percentage of high-speed distance. Team ratings were determined objectively using the Elo Ratings System for Gaelic football. Reference team rating had trivial effects on total distance (p = 0.011, partial η2 = 0.008) and high-speed distance (p = 0.011, partial η2 = 0.008). Opposition team rating had small effects on total distance (p = 0.005, partial η2 = 0.016) and high-speed distance (p = 0.001, partial η2 = 0.020). Top tier teams cover greater total distances and high-speed distance than lower tier teams. Players cover considerably less total distance and high-speed distance against tier 3 and tier 4 teams. Tier 1 players ran a significantly higher percentage of distance at high-speed, than players who played for tier 2 teams (p = 0.020). The competitive advantage of top tier Gaelic football teams is closely linked with their ability to demonstrate a higher physical intensity than lower tier teams.

Motion correction for improved estimation of heart rate using a visual spectrum camera

NASA Astrophysics Data System (ADS)

Tarbox, Elizabeth A.; Rios, Christian; Kaur, Balvinder; Meyer, Shaun; Hirt, Lauren; Tran, Vy; Scott, Kaitlyn; Ikonomidou, Vasiliki

2017-05-01

Heart rate measurement using a visual spectrum recording of the face has drawn interest over the last few years as a technology that can have various health and security applications. In our previous work, we have shown that it is possible to estimate the heart beat timing accurately enough to perform heart rate variability analysis for contactless stress detection. However, a major confounding factor in this approach is the presence of movement, which can interfere with the measurements. To mitigate the effects of movement, in this work we propose the use of face detection and tracking based on the Karhunen-Loewe algorithm in order to counteract measurement errors introduced by normal subject motion, as expected during a common seated conversation setting. We analyze the requirements on image acquisition for the algorithm to work, and its performance under different ranges of motion, changes of distance to the camera, as well and the effect of illumination changes due to different positioning with respect to light sources on the acquired signal. Our results suggest that the effect of face tracking on visual-spectrum based cardiac signal estimation depends on the amplitude of the motion. While for larger-scale conversation-induced motion it can significantly improve estimation accuracy, with smaller-scale movements, such as the ones caused by breathing or talking without major movement errors in facial tracking may interfere with signal estimation. Overall, employing facial tracking is a crucial step in adapting this technology to real-life situations with satisfactory results.

How behavioral science can advance digital health.

PubMed

Pagoto, Sherry; Bennett, Gary G

2013-09-01

The field of behavioral science has produced myriad data on health behavior change strategies and leveraged such data into effective human-delivered interventions to improve health. Unfortunately, the impact of traditional health behavior change interventions has been heavily constrained by patient and provider burden, limited ability to measure and intervene upon behavior in real time, variable adherence, low rates of implementation, and poor third-party coverage. Digital health technologies, including mobile phones, sensors, and online social networks, by being available in real time, are being explored as tools to increase our understanding of health behavior and to enhance the impact of behavioral interventions. The recent explosion of industry attention to the development of novel health technologies is exciting but has far outpaced research. This Special Section of Translational Behavioral Medicine, Smartphones, Sensors, and Social Networks: A New Age of Health Behavior Change features a collection of studies that leverage health technologies to measure, change, and/or understand health behavior. We propose five key areas in which behavioral science can improve the impact of digital health technologies on public health. First, research is needed to identify which health technologies actually impact behavior and health outcomes. Second, we need to understand how online social networks can be leveraged to impact health behavior on a large scale. Third, a team science approach is needed in the developmental process of health technologies. Fourth, behavioral scientists should identify how a balance can be struck between the fast pace of innovation and the much slower pace of research. Fifth, behavioral scientists have an integral role in informing the development of health technologies and facilitating the movement of health technologies into the healthcare system.

Age-associated and deslorelin-induced declines in serum anti-Müllerian hormone concentrations in female cheetahs, Acinonyx jubatus.

PubMed

Place, Ned J; Crosier, Adrienne E; Comizzoli, Pierre; Nagashima, Jennifer B; Haefele, Holly; Schmidt-Küntzel, Anne; Marker, Laurie L

2017-09-01

Anti-Müllerian hormone (AMH) is widely used in human medicine to non-invasively estimate the size of the ovarian follicle reserve and to predict the ovarian response to gonadotropin stimulation in the context of assisted reproductive technologies (e.g., IVF). These applications of AMH testing have recently expanded to non-human mammals, with production animals, such as cows, goats and sheep being the primary focus of AMH research. However, few investigations have involved exotic species, and in particular carnivores. In this study, we measured AMH concentrations (0.078-3.078ng/mL) in archived serum samples that had been collected from 36 adult female cheetahs across their reproductive lifespan (2-15years of age). Similar to other mammals, AMH concentration in cheetahs declined with age, and its variability among females of the same age was considerable. The rates at which AMH declined over time in individual cheetahs were also highly variable. Five cheetahs had been contracepted with the long-acting GnRH agonist deslorelin for 6-18months prior to sample collection, and their AMH concentrations were relatively low compared to untreated females. In this first study of AMH in an exotic carnivore, the findings demonstrate that the age-associated decline in AMH is highly variable and that deslorelin appears to suppress AMH concentration in serum. Owing to the increased use of assisted reproductive technologies in ex situ populations of threatened and endangered species, such as cheetahs, the present study's findings will need to be taken into consideration if AMH is to be used successfully to optimize breeding management decisions in exotic species. Copyright © 2017 Elsevier Inc. All rights reserved.

A Longitudinal Study of Academic Progress Rate as a Result of Team and Institutional Variables at NCAA Division I Schools

ERIC Educational Resources Information Center

Hale, Jimmie Edwin

2014-01-01

This study explained Academic Progress Rate (APR) levels and differences in APR (DAPR) with team and institutional variables. Team variables included team gender, sport profile, and squad size. Institutional variables included individual variables aggregated to the institutional level. The data analyzed in this study was derived from the National…

Priority survey between indicators and analytic hierarchy process analysis for green chemistry technology assessment.

PubMed

Kim, Sungjune; Hong, Seokpyo; Ahn, Kilsoo; Gong, Sungyong

2015-01-01

This study presents the indicators and proxy variables for the quantitative assessment of green chemistry technologies and evaluates the relative importance of each assessment element by consulting experts from the fields of ecology, chemistry, safety, and public health. The results collected were subjected to an analytic hierarchy process to obtain the weights of the indicators and the proxy variables. These weights may prove useful in avoiding having to resort to qualitative means in absence of weights between indicators when integrating the results of quantitative assessment by indicator. This study points to the limitations of current quantitative assessment techniques for green chemistry technologies and seeks to present the future direction for quantitative assessment of green chemistry technologies.

Benefits of advanced propulsion technology for the advanced supersonic transport

NASA Technical Reports Server (NTRS)

Hines, R. W.; Sabatella, J. A.

1973-01-01

Future supersonic transports will have to provide improvement in the areas of economics, range, and emissions relative to the present generation of supersonic transports, as well as meeting or improving upon FAR 36 noise goals. This paper covers the promising propulsion systems including variable-cycle engine concepts for long-range supersonic commercial transport application. The benefits of applying advanced propulsion technology to solve the economic and environmental problems are reviewed. The advanced propulsion technologies covered are in the areas of structures, materials, cooling techniques, aerodynamics, variable engine geometry, jet noise suppressors, acoustic treatment, and low-emission burners. The results of applying the advanced propulsion technology are presented in terms of improvement in overall system takeoff gross weight and return on investment.

Multi-Objective Sliding Mode Control on Vehicle Cornering Stability with Variable Gear Ratio Actuator-Based Active Front Steering Systems

PubMed Central

Ma, Xinbo; Wong, Pak Kin; Zhao, Jing; Xie, Zhengchao

2016-01-01

Active front steering (AFS) is an emerging technology to improve the vehicle cornering stability by introducing an additional small steering angle to the driver’s input. This paper proposes an AFS system with a variable gear ratio steering (VGRS) actuator which is controlled by using the sliding mode control (SMC) strategy to improve the cornering stability of vehicles. In the design of an AFS system, different sensors are considered to measure the vehicle state, and the mechanism of the AFS system is also modelled in detail. Moreover, in order to improve the cornering stability of vehicles, two dependent objectives, namely sideslip angle and yaw rate, are considered together in the design of SMC strategy. By evaluating the cornering performance, Sine with Dwell and accident avoidance tests are conducted, and the simulation results indicate that the proposed SMC strategy is capable of improving the cornering stability of vehicles in practice. PMID:28036037

Formulation and characterization of Turkish oregano microcapsules prepared by spray-drying technology.

PubMed

Baranauskaite, Juste; Ivanauskas, Liudas; Masteikova, Ruta; Kopustinskiene, Dalia; Baranauskas, Algirdas; Bernatoniene, Jurga

2017-09-01

The aim of this study was optimization of spray-drying process conditions for microencapsulation of Turkish oregano extract. Different concentrations of maltodextrin and gum arabic as encapsulating agents (wall material) as well as influence of selected processing variables were evaluated. The optimal conditions were maintained on the basis of the load of main bioactive compounds - ursolic, rosmarinic acids and carvacrol - in prepared microparticles after comparison of all significant response variables using desirability function. Physicomechanical properties of powders such as flowability, wettability, solubility, moisture content as well as product yield, encapsulation efficiency (EE), density, morphology and size distribution of prepared microparticles have been determined. The results demonstrated that the optimal conditions for spray-drying mixture consisted of two parts of wall material solution and one part of ethanolic oregano extract when the feed flow rate was 40 mL/min and air inlet temperature -170 °C. Optimal concentration of wall materials in solution was 20% while the ratio of maltodextrin and gum arabic was 8.74:1.26.

Ultra-high-speed variable focus optics for novel applications in advanced imaging

NASA Astrophysics Data System (ADS)

Kang, S.; Dotsenko, E.; Amrhein, D.; Theriault, C.; Arnold, C. B.

2018-02-01

With the advancement of ultra-fast manufacturing technologies, high speed imaging with high 3D resolution has become increasingly important. Here we show the use of an ultra-high-speed variable focus optical element, the TAG Lens, to enable new ways to acquire 3D information from an object. The TAG Lens uses sound to adjust the index of refraction profile in a liquid and thereby can achieve focal scanning rates greater than 100 kHz. When combined with a high-speed pulsed LED and a high-speed camera, we can exploit this phenomenon to achieve high-resolution imaging through large depths. By combining the image acquisition with digital image processing, we can extract relevant parameters such as tilt and angle information from objects in the image. Due to the high speeds at which images can be collected and processed, we believe this technique can be used as an efficient method of industrial inspection and metrology for high throughput applications.

Does external walking environment affect gait patterns?

PubMed

Patterson, Matthew R; Whelan, Darragh; Reginatto, Brenda; Caprani, Niamh; Walsh, Lorcan; Smeaton, Alan F; Inomata, Akihiro; Caulfield, Brian

2014-01-01

The objective of this work is to develop an understanding of the relationship between mobility metrics obtained outside of the clinic or laboratory and the context of the external environment. Ten subjects walked with an inertial sensor on each shank and a wearable camera around their neck. They were taken on a thirty minute walk in which they mobilized over the following conditions; normal path, busy hallway, rough ground, blind folded and on a hill. Stride time, stride time variability, stance time and peak shank rotation rate during swing were calculated using previously published algorithms. Stride time was significantly different between several of the conditions. Technological advances mean that gait variables can now be captured as patients go about their daily lives. The results of this study show that the external environment has a significant impact on the quality of gait metrics. Thus, context of external walking environment is an important consideration when analyzing ambulatory gait metrics from the unsupervised home and community setting.

Ultra Small Aperture Terminal for Ka-Band SATCOM

NASA Technical Reports Server (NTRS)

Acosta, Roberto; Reinhart, Richard; Lee, Richard; Simons, Rainee

1997-01-01

An ultra small aperture terminal (USAT) at Ka-band frequency has been developed by Lewis Research Center (LeRC) for data rates up to 1.5 Mbps in the transmit mode and 40 Mbps in receive mode. The terminal consists of a 35 cm diameter offset-fed parabolic antenna which is attached to a solid state power amplifier and low noise amplifier. A single down converter is used to convert the Ka-band frequency to 70 MHz intermediate frequency (IF). A variable rate (9.6 Kbps to 10 Mbps) commercial modem with a standard RS-449/RS-232 interface is used to provide point-to-point digital services. The terminal has been demonstrated numerous times using the Advanced Communications Technology Satellite (ACTS) and the 4.5 in Link Evaluation Terminal (LET) in Cleveland. A conceptual design for an advanced terminal has also been developed. This advanced USAT utilizes Microwave Monolithic Integrated Circuit (MMIC) and flat plate array technologies. This terminal will be self contained in a single package which will include a 1 watt solid state amplifier (SSPA), low noise amplifier (LNA) and a modem card located behind the aperture of the array. The advanced USAT will be light weight, transportable, low cost and easy to point to the satellite. This paper will introduce designs for the reflector based and array based USAT's.

Older Adults' Acceptance of Information Technology

ERIC Educational Resources Information Center

Wang, Lin; Rau, Pei-Luen Patrick; Salvendy, Gavriel

2011-01-01

This study investigated variables contributing to older adults' information technology acceptance through a survey, which was used to find factors explaining and predicting older adults' information technology acceptance behaviors. Four factors, including needs satisfaction, perceived usability, support availability, and public acceptance, were…

Examining Music Teachers' Self-Confidence Levels in Using Information and Communication Technologies for Education Based on Measurable Variables

ERIC Educational Resources Information Center

Kilic, Deniz Beste Çevik

2017-01-01

Rapid developments and innovations in technology have impact on individuals. The use of technology for one's daily life has become a necessity; therefore, the development and popularization of Information and Communication Technologies (ICTs) is use as a tool for solving educational problems. Because educational technologies play a major role both…

78 FR 18585 - Energy Technology Savings LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-27

... facilitate electronic service, persons with Internet access who will eFile a document and/or be listed as a... Technology Savings LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes Request for... Energy Technology Savings LLC's application for market-based rate authority, with an accompanying rate...

Development of digital flow control system for multi-channel variable-rate sprayers

USDA-ARS?s Scientific Manuscript database

Precision modulation of nozzle flow rates is a critical step for variable-rate spray applications in orchards and ornamental nurseries. An automatic flow rate control system activated with microprocessors and pulse width modulation (PWM) controlled solenoid valves was developed to control flow rates...

The Technology Adoption Process Model and Self-Efficacy of Distance Education Students

ERIC Educational Resources Information Center

Olson, Joel D.; Appunn, Frank D.

2017-01-01

The technology adoption process model (TAPM) is applied to a new synchronous conference technology with 27 asynchronous courses involving 520 participants and 17 instructors. The TAPM resulted from a qualitative study reviewing webcam conference technology adoption. The TAPM is now tested using self-efficacy as the dependent variable. The…

Heavy metal and trace element concentrations in blood and follicular fluid affect ART outcome.

PubMed

Tolunay, Harun Egemen; Şükür, Yavuz Emre; Ozkavukcu, Sinan; Seval, Mehmet Murat; Ateş, Can; Türksoy, Vugar Ali; Ecemiş, Tolga; Atabekoğlu, Cem Somer; Özmen, Batuhan; Berker, Bülent; Sönmezer, Murat

2016-03-01

To assess the effects of heavy metal and trace element concentrations in blood and follicular fluid on assisted reproductive technology cycle outcome. A prospective study was conducted between January 2012 and July 2012 in a university hospital infertility clinic. One hundred and one patients with unexplained infertility who underwent intracytoplasmic sperm injection using GnRH-antagonist protocol were recruited. Concentrations of four toxic metals (Cd, Pb, Hg, As) and three trace elements (Cu, Zn, Fe) were measured both in blood and follicular fluid specimens. Patients were evaluated in two groups; the study group consisted of patients with ongoing pregnancy (n=20) and the reference group consisted of patients experienced assisted reproductive technology failure, miscarriage or biochemical pregnancy (n=81). Demographics and cycle parameters were comparable between the groups except for median number of day 3 Grade A embryos. Statistically significant negative correlations were found between blood Pb levels and number of MII oocytes, implantation, clinical pregnancy and ongoing pregnancy rates. Results of the log binomial regression revealed 2.2% lower risk for ongoing pregnancy for each 1μg/dL higher blood Pb concentration while holding the other variables in the model constant (RR 0.978; 95% CI 0.956-0.998; P=.041). Also, the results revealed 71.9% lower risk for ongoing pregnancy for each 1μg/dL higher follicular fluid Cu concentration while holding the other variables in the model constant (RR 0.288; 95% CI 0.085-0.92; P=.039). Blood concentrations of Pb and follicular fluid concentrations of Cu seem to have significant impacts on assisted reproductive technology cycle outcome. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Intra-day signal instabilities affect decoding performance in an intracortical neural interface system.

PubMed

Perge, János A; Homer, Mark L; Malik, Wasim Q; Cash, Sydney; Eskandar, Emad; Friehs, Gerhard; Donoghue, John P; Hochberg, Leigh R

2013-06-01

Motor neural interface systems (NIS) aim to convert neural signals into motor prosthetic or assistive device control, allowing people with paralysis to regain movement or control over their immediate environment. Effector or prosthetic control can degrade if the relationship between recorded neural signals and intended motor behavior changes. Therefore, characterizing both biological and technological sources of signal variability is important for a reliable NIS. To address the frequency and causes of neural signal variability in a spike-based NIS, we analyzed within-day fluctuations in spiking activity and action potential amplitude recorded with silicon microelectrode arrays implanted in the motor cortex of three people with tetraplegia (BrainGate pilot clinical trial, IDE). 84% of the recorded units showed a statistically significant change in apparent firing rate (3.8 ± 8.71 Hz or 49% of the mean rate) across several-minute epochs of tasks performed on a single session, and 74% of the units showed a significant change in spike amplitude (3.7 ± 6.5 µV or 5.5% of mean spike amplitude). 40% of the recording sessions showed a significant correlation in the occurrence of amplitude changes across electrodes, suggesting array micro-movement. Despite the relatively frequent amplitude changes, only 15% of the observed within-day rate changes originated from recording artifacts such as spike amplitude change or electrical noise, while 85% of the rate changes most likely emerged from physiological mechanisms. Computer simulations confirmed that systematic rate changes of individual neurons could produce a directional 'bias' in the decoded neural cursor movements. Instability in apparent neuronal spike rates indeed yielded a directional bias in 56% of all performance assessments in participant cursor control (n = 2 participants, 108 and 20 assessments over two years), resulting in suboptimal performance in these sessions. We anticipate that signal acquisition and decoding methods that can adapt to the reported instabilities will further improve the performance of intracortically-based NISs.

Factors influencing healthcare provider respondent fatigue answering a globally administered in-app survey.

PubMed

O'Reilly-Shah, Vikas N

2017-01-01

Respondent fatigue, also known as survey fatigue, is a common problem in the collection of survey data. Factors that are known to influence respondent fatigue include survey length, survey topic, question complexity, and open-ended question type. There is a great deal of interest in understanding the drivers of physician survey responsiveness due to the value of information received from these practitioners. With the recent explosion of mobile smartphone technology, it has been possible to obtain survey data from users of mobile applications (apps) on a question-by-question basis. The author obtained basic demographic survey data as well as survey data related to an anesthesiology-specific drug called sugammadex and leveraged nonresponse rates to examine factors that influenced respondent fatigue. Primary data were collected between December 2015 and February 2017. Surveys and in-app analytics were collected from global users of a mobile anesthesia calculator app. Key independent variables were user country, healthcare provider role, rating of importance of the app to personal practice, length of time in practice, and frequency of app use. Key dependent variable was the metric of respondent fatigue. Provider role and World Bank country income level were predictive of the rate of respondent fatigue for this in-app survey. Importance of the app to the provider and length of time in practice were moderately associated with fatigue. Frequency of app use was not associated. This study focused on a survey with a topic closely related to the subject area of the app. Respondent fatigue rates will likely change dramatically if the topic does not align closely. Although apps may serve as powerful platforms for data collection, responses rates to in-app surveys may differ on the basis of important respondent characteristics. Studies should be carefully designed to mitigate fatigue as well as powered with the understanding of the respondent characteristics that may have higher rates of respondent fatigue.

Factors influencing healthcare provider respondent fatigue answering a globally administered in-app survey

PubMed Central

2017-01-01

Background Respondent fatigue, also known as survey fatigue, is a common problem in the collection of survey data. Factors that are known to influence respondent fatigue include survey length, survey topic, question complexity, and open-ended question type. There is a great deal of interest in understanding the drivers of physician survey responsiveness due to the value of information received from these practitioners. With the recent explosion of mobile smartphone technology, it has been possible to obtain survey data from users of mobile applications (apps) on a question-by-question basis. The author obtained basic demographic survey data as well as survey data related to an anesthesiology-specific drug called sugammadex and leveraged nonresponse rates to examine factors that influenced respondent fatigue. Methods Primary data were collected between December 2015 and February 2017. Surveys and in-app analytics were collected from global users of a mobile anesthesia calculator app. Key independent variables were user country, healthcare provider role, rating of importance of the app to personal practice, length of time in practice, and frequency of app use. Key dependent variable was the metric of respondent fatigue. Results Provider role and World Bank country income level were predictive of the rate of respondent fatigue for this in-app survey. Importance of the app to the provider and length of time in practice were moderately associated with fatigue. Frequency of app use was not associated. This study focused on a survey with a topic closely related to the subject area of the app. Respondent fatigue rates will likely change dramatically if the topic does not align closely. Discussion Although apps may serve as powerful platforms for data collection, responses rates to in-app surveys may differ on the basis of important respondent characteristics. Studies should be carefully designed to mitigate fatigue as well as powered with the understanding of the respondent characteristics that may have higher rates of respondent fatigue. PMID:28924502

Can variable frequency drives reduce irrigation costs for rice producers?

USDA-ARS?s Scientific Manuscript database

Variable Frequency Drives (VFD's) allow for variable speed operation of electrical motor drive irrigation pumps and are an emerging technology for agricultural irrigation, primarily for pressurized irrigation systems. They are considered an energy savings device, but less is known about their app...

Concordance of the ForenSeq™ system and characterisation of sequence-specific autosomal STR alleles across two major population groups.

PubMed

Devesse, Laurence; Ballard, David; Davenport, Lucinda; Riethorst, Immy; Mason-Buck, Gabriella; Syndercombe Court, Denise

2018-05-01

By using sequencing technology to genotype loci of forensic interest it is possible to simultaneously target autosomal, X and Y STRs as well as identity, ancestry and phenotypic informative SNPs, resulting in a breadth of data obtained from a single run that is considerable when compared to that generated with standard technologies. It is important however that this information aligns with the genotype data currently obtained using commercially available kits for CE-based investigations such that results are compatible with existing databases and hence can be of use to the forensic community. In this work, 400 samples were typed using commercially available STR kits and CE, as well as using the Ilumina ForenSeq™ DNA Signature Prep Kit and MiSeq ® FGx to assess concordance of autosomal STRs and population variability. Results show a concordance rate between the two technologies exceeding 99.98% while numerous novel sequence based alleles are described. In order to make use of the sequence variation observed, sequence specific allele frequencies were generated for White British and British Chinese populations. Copyright © 2017 Elsevier B.V. All rights reserved.

A lateral approach for sinus elevation using PRGF technology.

PubMed

Anitua, Eduardo; Prado, Roberto; Orive, Gorka

2009-10-01

A lateral approach for sinus elevation using plasma rich in growth factors (PRGF) technology is described. The long-term survival of dental implants installed following a two-stage procedure after sinus elevation using this procedure is reported, using implant loss as the outcome variable. A retrospective cohort study design was used. Eighteen patients received 43 implants (BTI implants, Biotechnology Institute, Vitoria, Spain) with sinus floor elevation. All patients presented a residual bone height of class D (1-3 mm). Implants were installed using a low-speed drilling procedure (50 rpm) without irrigation. Finally, the histological and histomorphometric evaluation of eight samples from PRGF grafted sinus involved in the study was carried out 5-6 months posttreatment. The overall survival rate of dental implants was 100%. The mean follow-up period for all implants was 33 +/- 7 months ranging from 24 to 44 months. In addition, the histomorphometrical evaluation of the samples evidenced a 25.24 +/- 4.62% of vital newly formed bone, 50.31 +/- 15.56% of soft connective tissue, and the remaining 24.46 +/- 12.79% of bovine anorganic bone. Based on these results, this new approach for sinus elevation and implant installation using PRGF technology can be considered safe, simple, effective, and predictable.

Conceptual design study of an improved automotive gas turbine powertrain

NASA Technical Reports Server (NTRS)

Wagner, C. E. (Editor); Pampreen, R. C. (Editor)

1979-01-01

Automotive gas turbine concepts with significant technological advantages over the spark ignition (SI) engine were assessed. Possible design concepts were rated with respect to fuel economy and near-term application. A program plan which outlines the development of the improved gas turbine (IGT) concept that best met the goals and objectives of the study identifies the research and development work needed to meet the goal of entering a production engineering phase by 1983. The fuel economy goal is to show at least a 20% improvement over a conventional 1976 SI engine/vehicle system. On the basis of achieving the fuel economy goal, of overall suitability to mechanical design, and of automotive mass production cost, the powertrain selected was a single-shaft engine with a radial turbine and a continuously variable transmission (CVT). Design turbine inlet temperature was 1150 C. Reflecting near-term technology, the turbine rotor would be made of an advanced superalloy, and the transmission would be a hydromechanical CVT. With successful progress in long-lead R&D in ceramic technology and the belt-drive CVT, the turbine inlet temperature would be 1350 C to achieve near-maximum fuel economy.

Technology Transience and the Challenges It Poses to Higher Education

ERIC Educational Resources Information Center

Amirault, Ray J.

2015-01-01

Today's technologies come and go at an alarming rate, and the length of time any one technology, either software or hardware, exists before being supplanted by a newer technology is growing ever shorter. For anyone working within the field of instructional technology, this rapid replacement rate of technologies can hold immense implications for…

Benchtop Technologies for Circulating Tumor Cells Separation Based on Biophysical Properties

PubMed Central

Low, Wan Shi; Wan Abas, Wan Abu Bakar

2015-01-01

Circulating tumor cells (CTCs) are tumor cells that have detached from primary tumor site and are transported via the circulation system. The importance of CTCs as prognostic biomarker is leveraged when multiple studies found that patient with cutoff of 5 CTCs per 7.5 mL blood has poor survival rate. Despite its clinical relevance, the isolation and characterization of CTCs can be quite challenging due to their large morphological variability and the rare presence of CTCs within the blood. Numerous methods have been employed and discussed in the literature for CTCs separation. In this paper, we will focus on label free CTCs isolation methods, in which the biophysical and biomechanical properties of cells (e.g., size, deformability, and electricity) are exploited for CTCs detection. To assess the present state of various isolation methods, key performance metrics such as capture efficiency, cell viability, and throughput will be reported. Finally, we discuss the challenges and future perspectives of CTC isolation technologies. PMID:25977918

Benchtop technologies for circulating tumor cells separation based on biophysical properties.

PubMed

Low, Wan Shi; Wan Abas, Wan Abu Bakar

2015-01-01

Circulating tumor cells (CTCs) are tumor cells that have detached from primary tumor site and are transported via the circulation system. The importance of CTCs as prognostic biomarker is leveraged when multiple studies found that patient with cutoff of 5 CTCs per 7.5 mL blood has poor survival rate. Despite its clinical relevance, the isolation and characterization of CTCs can be quite challenging due to their large morphological variability and the rare presence of CTCs within the blood. Numerous methods have been employed and discussed in the literature for CTCs separation. In this paper, we will focus on label free CTCs isolation methods, in which the biophysical and biomechanical properties of cells (e.g., size, deformability, and electricity) are exploited for CTCs detection. To assess the present state of various isolation methods, key performance metrics such as capture efficiency, cell viability, and throughput will be reported. Finally, we discuss the challenges and future perspectives of CTC isolation technologies.

The Impact of Health Literacy on a Patient's Decision to Adopt a Personal Health Record

PubMed Central

Noblin, Alice M.; Wan, Thomas T. H.; Fottler, Myron

2012-01-01

Health literacy is a concept that describes a patient's ability to understand materials provided by physicians or other providers. Several factors, including education level, income, and age, can influence health literacy. Research conducted at one medical practice in Florida indicated that in spite of the patients’ relatively low education level, the majority indicated a broad acceptance of personal health record (PHR) technology. The key variable explaining patient willingness to adopt a PHR was the patient's health literacy as measured by the eHealth Literacy Scale (eHEALS). Adoption and use rates may also depend on the availability of office staff for hands-on training as well as assistance with interpretation of medical information. It is hoped that technology barriers will disappear over time, and usefulness of the information will promote increased utilization of PHRs. Patient understanding of the information remains a challenge that must be overcome to realize the full potential of PHRs. PMID:23209454

Microeconomics of process control in semiconductor manufacturing

NASA Astrophysics Data System (ADS)

Monahan, Kevin M.

2003-06-01

Process window control enables accelerated design-rule shrinks for both logic and memory manufacturers, but simple microeconomic models that directly link the effects of process window control to maximum profitability are rare. In this work, we derive these links using a simplified model for the maximum rate of profit generated by the semiconductor manufacturing process. We show that the ability of process window control to achieve these economic objectives may be limited by variability in the larger manufacturing context, including measurement delays and process variation at the lot, wafer, x-wafer, x-field, and x-chip levels. We conclude that x-wafer and x-field CD control strategies will be critical enablers of density, performance and optimum profitability at the 90 and 65nm technology nodes. These analyses correlate well with actual factory data and often identify millions of dollars in potential incremental revenue and cost savings. As an example, we show that a scatterometry-based CD Process Window Monitor is an economically justified, enabling technology for the 65nm node.

Poisson-Like Spiking in Circuits with Probabilistic Synapses

PubMed Central

Moreno-Bote, Rubén

2014-01-01

Neuronal activity in cortex is variable both spontaneously and during stimulation, and it has the remarkable property that it is Poisson-like over broad ranges of firing rates covering from virtually zero to hundreds of spikes per second. The mechanisms underlying cortical-like spiking variability over such a broad continuum of rates are currently unknown. We show that neuronal networks endowed with probabilistic synaptic transmission, a well-documented source of variability in cortex, robustly generate Poisson-like variability over several orders of magnitude in their firing rate without fine-tuning of the network parameters. Other sources of variability, such as random synaptic delays or spike generation jittering, do not lead to Poisson-like variability at high rates because they cannot be sufficiently amplified by recurrent neuronal networks. We also show that probabilistic synapses predict Fano factor constancy of synaptic conductances. Our results suggest that synaptic noise is a robust and sufficient mechanism for the type of variability found in cortex. PMID:25032705

Documenting Differences between Early Stone Age Flake Production Systems: An Experimental Model and Archaeological Verification.

PubMed

Presnyakova, Darya; Archer, Will; Braun, David R; Flear, Wesley

2015-01-01

This study investigates morphological differences between flakes produced via "core and flake" technologies and those resulting from bifacial shaping strategies. We investigate systematic variation between two technological groups of flakes using experimentally produced assemblages, and then apply the experimental model to the Cutting 10 Mid -Pleistocene archaeological collection from Elandsfontein, South Africa. We argue that a specific set of independent variables--and their interactions--including external platform angle, platform depth, measures of thickness variance and flake curvature should distinguish between these two technological groups. The role of these variables in technological group separation was further investigated using the Generalized Linear Model as well as Linear Discriminant Analysis. The Discriminant model was used to classify archaeological flakes from the Cutting 10 locality in terms of their probability of association, within either experimentally developed technological group. The results indicate that the selected independent variables play a central role in separating core and flake from bifacial technologies. Thickness evenness and curvature had the greatest effect sizes in both the Generalized Linear and Discriminant models. Interestingly the interaction between thickness evenness and platform depth was significant and played an important role in influencing technological group membership. The identified interaction emphasizes the complexity in attempting to distinguish flake production strategies based on flake morphological attributes. The results of the discriminant function analysis demonstrate that the majority of flakes at the Cutting 10 locality were not associated with the production of the numerous Large Cutting Tools found at the site, which corresponds with previous suggestions regarding technological behaviors reflected in this assemblage.

Temporal variability in stage-discharge relationships

NASA Astrophysics Data System (ADS)

Guerrero, José-Luis; Westerberg, Ida K.; Halldin, Sven; Xu, Chong-Yu; Lundin, Lars-Christer

2012-06-01

SummaryAlthough discharge estimations are central for water management and hydropower, there are few studies on the variability and uncertainty of their basis; deriving discharge from stage heights through the use of a rating curve that depends on riverbed geometry. A large fraction of the world's river-discharge stations are presumably located in alluvial channels where riverbed characteristics may change over time because of erosion and sedimentation. This study was conducted to analyse and quantify the dynamic relationship between stage and discharge and to determine to what degree currently used methods are able to account for such variability. The study was carried out for six hydrometric stations in the upper Choluteca River basin, Honduras, where a set of unusually frequent stage-discharge data are available. The temporal variability and the uncertainty of the rating curve and its parameters were analysed through a Monte Carlo (MC) analysis on a moving window of data using the Generalised Likelihood Uncertainty Estimation (GLUE) methodology. Acceptable ranges for the values of the rating-curve parameters were determined from riverbed surveys at the six stations, and the sampling space was constrained according to those ranges, using three-dimensional alpha shapes. Temporal variability was analysed in three ways: (i) with annually updated rating curves (simulating Honduran practices), (ii) a rating curve for each time window, and (iii) a smoothed, continuous dynamic rating curve derived from the MC analysis. The temporal variability of the rating parameters translated into a high rating-curve variability. The variability could turn out as increasing or decreasing trends and/or cyclic behaviour. There was a tendency at all stations to a seasonal variability. The discharge at a given stage could vary by a factor of two or more. The quotient in discharge volumes estimated from dynamic and static rating curves varied between 0.5 and 1.5. The difference between discharge volumes derived from static and dynamic curves was largest for sub-daily ratings but stayed large also for monthly and yearly totals. The relative uncertainty was largest for low flows but it was considerable also for intermediate and large flows. The standard procedure of adjusting rating curves when calculated and observed discharge differ by more than 5% would have required continuously updated rating curves at the studied locations. We believe that these findings can be applicable to many other discharge stations around the globe.

Binaural Beat Technology: A Complementary Path to Post Deployment Wellness

DTIC Science & Technology

2017-03-16

for at least three consecutive nights per week, for four weeks. A 20-minute pre and post -intervention heartrate variability (HRV) stress test and...four weeks. A 20-minute pre and post -intervention heartrate variability (HRV) stress test and daily perceived stress assessed intervention efficacy...DATES COVERED (Jul 7 2012 – Dec 31 2016) Binaural Beat Technology: A Complementary Path to Post Deployment Wellness 5a. CONTRACT NUMBER N/A 5b

Which Are the Determinants of Online Students' Efficiency in Higher Education?

NASA Astrophysics Data System (ADS)

Castillo-Merino, David; Serradell-Lopez, Enric; González-González, Inés

International literature shows that the positive effect on students performance from the adoption of innovations in the technology of teaching and learning do not affect all teaching methods and learning styles equally, as it depends on university strategy and policy towards Information and Communication Technologies (ICT) adoption, students abilities, technology uses in the educational process by teachers and students, or the selection of a methodology that matches with digital uses. This paper provides empirical answers to these questions with data from online students at the Open University of Catalonia (UOC). An empirical model based on structural equations has been defined to explain complex relationships between variables. Our results show that motivation is the main variable affecting online students' performance. It appears as a latent variable influenced by students' perception of efficiency, a driver for indirect positive and significant effect on students' performance from students' ability in ICT uses.

Projection Exposure with Variable Axis Immersion Lenses: A High-Throughput Electron Beam Approach to “Suboptical” Lithography

NASA Astrophysics Data System (ADS)

Pfeiffer, Hans

1995-12-01

IBM's high-throughput e-beam stepper approach PRojection Exposure with Variable Axis Immersion Lenses (PREVAIL) is reviewed. The PREVAIL concept combines technology building blocks of our probe-forming EL-3 and EL-4 systems with the exposure efficiency of pattern projection. The technology represents an extension of the shaped-beam approach toward massively parallel pixel projection. As demonstrated, the use of variable-axis lenses can provide large field coverage through reduction of off-axis aberrations which limit the performance of conventional projection systems. Subfield pattern sections containing 107 or more pixels can be electronically selected (mask plane), projected and positioned (wafer plane) at high speed. To generate the entire chip pattern subfields must be stitched together sequentially in a combination of electronic and mechanical positioning of mask and wafer. The PREVAIL technology promises throughput levels competitive with those of optical steppers at superior resolution. The PREVAIL project is being pursued to demonstrate the viability of the technology and to develop an e-beam alternative to “suboptical” lithography.

State-of-the-Art Sensor Technology in Spain: Invasive and Non-Invasive Techniques for Monitoring Respiratory Variables

PubMed Central

Domingo, Christian; Blanch, Lluis; Murias, Gaston; Luján, Manel

2010-01-01

The interest in measuring physiological parameters (especially arterial blood gases) has grown progressively in parallel to the development of new technologies. Physiological parameters were first measured invasively and at discrete time points; however, it was clearly desirable to measure them continuously and non-invasively. The development of intensive care units promoted the use of ventilators via oral intubation ventilators via oral intubation and mechanical respiratory variables were progressively studied. Later, the knowledge gained in the hospital was applied to out-of-hospital management. In the present paper we review the invasive and non-invasive techniques for monitoring respiratory variables. PMID:22399898

State-of-the-art sensor technology in Spain: invasive and non-invasive techniques for monitoring respiratory variables.

PubMed

Domingo, Christian; Blanch, Lluis; Murias, Gaston; Luján, Manel

2010-01-01

The interest in measuring physiological parameters (especially arterial blood gases) has grown progressively in parallel to the development of new technologies. Physiological parameters were first measured invasively and at discrete time points; however, it was clearly desirable to measure them continuously and non-invasively. The development of intensive care units promoted the use of ventilators via oral intubation ventilators via oral intubation and mechanical respiratory variables were progressively studied. Later, the knowledge gained in the hospital was applied to out-of-hospital management. In the present paper we review the invasive and non-invasive techniques for monitoring respiratory variables.

Difficulties with Regression Analysis of Age-Adjusted Rates.

DTIC Science & Technology

1982-09-01

variables used in those analyses, such as death rates in various states, have been age adjusted, whereas the predictor variables have not been age adjusted...The use of crude state death rates as the outcome variable with crude covariates and age as predictors can avoid the problem, at least under some...should be regressed on age-adjusted exposure Z+B+ Although age-specific death rates , Yas+’ may be available, it is often difficult to obtain age

Cognitive Performance and Heart Rate Variability: The Influence of Fitness Level

PubMed Central

Luque-Casado, Antonio; Zabala, Mikel; Morales, Esther; Mateo-March, Manuel; Sanabria, Daniel

2013-01-01

In the present study, we investigated the relation between cognitive performance and heart rate variability as a function of fitness level. We measured the effect of three cognitive tasks (the psychomotor vigilance task, a temporal orienting task, and a duration discrimination task) on the heart rate variability of two groups of participants: a high-fit group and a low-fit group. Two major novel findings emerged from this study. First, the lowest values of heart rate variability were found during performance of the duration discrimination task, compared to the other two tasks. Second, the results showed a decrement in heart rate variability as a function of the time on task, although only in the low-fit group. Moreover, the high-fit group showed overall faster reaction times than the low-fit group in the psychomotor vigilance task, while there were not significant differences in performance between the two groups of participants in the other two cognitive tasks. In sum, our results highlighted the influence of cognitive processing on heart rate variability. Importantly, both behavioral and physiological results suggested that the main benefit obtained as a result of fitness level appeared to be associated with processes involving sustained attention. PMID:23437276

The HPT Value Proposition in the Larger Improvement Arena.

ERIC Educational Resources Information Center

Wallace, Guy W.

2003-01-01

Discussion of human performance technology (HPT) emphasizes the key variable, which is the human variable. Highlights include the Ishikawa Diagram; human performance as one variable of process performance; collaborating with other improvement approaches; value propositions; and benefits to stakeholders, including real return on investments. (LRW)

Spatiotemporal movement variability in ALS: Speaking rate effects on tongue, lower lip, and jaw motor control

PubMed Central

Kuruvilla-Dugdale, Mili; Mefferd, Antje

2017-01-01

Purpose Although it is frequently presumed that bulbar muscle degeneration in Amyotrophic Lateral Sclerosis (ALS) is associated with progressive loss of speech motor control, empirical evidence is limited. Furthermore, because speaking rate slows with disease progression and rate manipulations are used to improve intelligibility in ALS, this study sought to (i) determine between and within-group differences in articulatory motor control as a result of speaking rate changes and (ii) identify the strength of association between articulatory motor control and speech impairment severity. Method Ten talkers with ALS and 11 healthy controls repeated the target sentence at habitual, fast, and slow rates. The spatiotemporal variability index (STI) was calculated to determine tongue, lower lip, and jaw movement variability. Results During habitual speech, talkers with mild-moderate dysarthria displayed significantly lower tongue and lip movement variability whereas those with severe dysarthria showed greater variability compared to controls. Within-group rate effects were significant only for talkers with ALS. Specifically, lip and tongue movement variability significantly increased during slow speech relative to habitual and fast speech. Finally, preliminary associations between speech impairment severity and movement variability were moderate to strong in talkers with ALS. Conclusion Between-group differences for habitual speech and within-group effects for slow speech replicated previous findings for lower lip and jaw movements. Preliminary findings of moderate to strong associations between speech impairment severity and STI suggest that articulatory variability may vary from pathologically low (possibly indicating articulatory compensation) to pathologically high variability (possibly indicating loss of control) with dysarthria progression in ALS. PMID:28528293

Phytoremediation and bioremediation of polychlorinated biphenyls (PCBs): state of knowledge and research perspectives.

PubMed

Passatore, Laura; Rossetti, Simona; Juwarkar, Asha A; Massacci, Angelo

2014-08-15

This review summarizes the bioremediation and phytoremediation technologies proposed so far to detoxify PCB-contaminated sites. A critical analysis about the potential and limits of the PCB pollution treatment strategies by means of plants, fungi and bacteria are elucidated, including the new insights emerged from recent studies on the rhizosphere potential and on the implementation of simultaneous aerobic and anaerobic biodegradation processes. The review describes the biodegradation and phytoremediation processes and elaborates on the environmental variables affecting contaminant degradation rates, summarizing the amendments recommended to enhance PCB degradation. Additionally, issues connected with PCB toxicology, actual field remediation strategies and economical evaluation are discussed. Copyright © 2014 Elsevier B.V. All rights reserved.

Photo-Induced Click Chemistry for DNA Surface Structuring by Direct Laser Writing.

PubMed

Kerbs, Antonina; Mueller, Patrick; Kaupp, Michael; Ahmed, Ishtiaq; Quick, Alexander S; Abt, Doris; Wegener, Martin; Niemeyer, Christof M; Barner-Kowollik, Christopher; Fruk, Ljiljana

2017-04-11

Oligonucleotides containing photo-caged dienes were prepared and shown to react quantitatively in a light-induced Diels-Alder cycloaddition with functional maleimides in aqueous solution within minutes. Due to its high yield and fast rate, the reaction was exploited for DNA surface patterning with sub-micrometer resolution employing direct laser writing (DLW). Functional DNA arrays were written by direct laser writing (DLW) in variable patterns, which were further encoded with fluorophores and proteins through DNA directed immobilization. This mild and efficient light-driven platform technology holds promise for the fabrication of complex bioarrays with sub-micron resolution. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Heartbeat and economic decisions: observing mental stress among proposers and responders in the ultimatum bargaining game.

PubMed

Dulleck, Uwe; Schaffner, Markus; Torgler, Benno

2014-01-01

The ultimatum bargaining game (UBG), a widely used method in experimental economics, clearly demonstrates that motives other than pure monetary reward play a role in human economic decision making. In this study, we explore the behaviour and physiological reactions of both responders and proposers in an ultimatum bargaining game using heart rate variability (HRV), a small and nonintrusive technology that allows observation of both sides of an interaction in a normal experimental economics laboratory environment. We find that low offers by a proposer cause signs of mental stress in both the proposer and the responder; that is, both exhibit high ratios of low to high frequency activity in the HRV spectrum.

Effects of head-down bed rest on complex heart rate variability: Response to LBNP testing

NASA Technical Reports Server (NTRS)

Goldberger, Ary L.; Mietus, Joseph E.; Rigney, David R.; Wood, Margie L.; Fortney, Suzanne M.

1994-01-01

Head-down bed rest is used to model physiological changes during spaceflight. We postulated that bed rest would decrease the degree of complex physiological heart rate variability. We analyzed continuous heart rate data from digitized Holter recordings in eight healthy female volunteers (age 28-34 yr) who underwent a 13-day 6 deg head-down bed rest study with serial lower body negative pressure (LBNP) trials. Heart rate variability was measured on a 4-min data sets using conventional time and frequency domain measures as well as with a new measure of signal 'complexity' (approximate entropy). Data were obtained pre-bed rest (control), during bed rest (day 4 and day 9 or 11), and 2 days post-bed rest (recovery). Tolerance to LBNP was significantly reduced on both bed rest days vs. pre-bed rest. Heart rate variability was assessed at peak LBNP. Heart rate approximate entropy was significantly decreased at day 4 and day 9 or 11, returning toward normal during recovery. Heart rate standard deviation and the ratio of high- to low-power frequency did not change significantly. We conclude that short-term bed rest is associated with a decrease in the complex variability of heart rate during LBNP testing in healthy young adult women. Measurement of heart rate complexity, using a method derived from nonlinear dynamics ('chaos theory'), may provide a sensitive marker of this loss of physiological variability, complementing conventional time and frequency domain statistical measures.

Long-Term Coarse Particulate Matter Exposure and Heart Rate Variability in the Multi-Ethnic Study of Atherosclerosis (MESA)

PubMed Central

Adhikari, Richa; D’Souza, Jennifer; Solimon, Elsayed Z.; Burke, Gregory L.; Daviglus, Martha; Jacobs, David R.; Park, Sung Kyun; Sheppard, Lianne; Thorne, Peter S.; Kaufman, Joel D.; Larson, Timothy V.; Adar, Sara D.

2017-01-01

Background Reduced heart rate variability, a marker of impaired cardiac autonomic function, has been linked to short-term exposure to airborne particles. This research adds to the literature by examining associations with long-term exposures to coarse particles (PM10-2.5). Methods Using electrocardiogram recordings from 2,780 participants (45-84 years) from three Multi-Ethnic Study of Atherosclerosis sites, we assessed the standard deviation of normal-to-normal intervals (SDNN) and root-mean square differences of successive normal-to-normal intervals (rMSSD) at a baseline (2000-2002) and follow-up (2010-2012) examination (mean visits/person=1.5). Annual average concentrations of PM10-2.5 mass, copper, zinc, phosphorus, silicon, and endotoxin were estimated using site-specific spatial prediction models. We assessed associations for baseline heart rate variability and rate of change in heart rate variability over time using multivariable mixed models adjusted for time, sociodemographic, lifestyle, health, and neighborhood confounders, including co-pollutants. Results In our primary models adjusted for demographic and lifestyle factors and site, PM10-2.5 mass was associated with 1.0% (95% CI: -4.1, 2.1%) lower SDNN levels per interquartile range of 2 μg/m3. Stronger associations, however, were observed prior to site adjustment and with increasing residential stablity. Similar patterns were found for rMSSD. We found little evidence for associations with other chemical species and with with the rate of change in heart rate variability, though endotoxin was associated with increasing heart rate variability over time. Conclusion We found only weak evidence that long-term PM10-2.5 exposures are associated with lowered heart rate variability. Stronger associations among residentially stable individuals suggest that confirmatory studies are needed. PMID:27035690

Effects of depression, anxiety, comorbidity, and antidepressants on resting-state heart rate and its variability: an ELSA-Brasil cohort baseline study.

PubMed

Kemp, Andrew H; Brunoni, Andre R; Santos, Itamar S; Nunes, Maria A; Dantas, Eduardo M; Carvalho de Figueiredo, Roberta; Pereira, Alexandre C; Ribeiro, Antonio L P; Mill, José G; Andreão, Rodrigo V; Thayer, Julian F; Benseñor, Isabela M; Lotufo, Paulo A

2014-12-01

Increases in resting-state heart rate and decreases in its variability are associated with substantial morbidity and mortality, yet contradictory findings have been reported for the effects of the mood and anxiety disorders and of antidepressants. The authors investigated heart rate and heart rate variability in a large cohort from Brazil, using propensity score weighting, a relatively novel method, to control for numerous potential confounders. A total of 15,105 participants were recruited in the Brazilian Longitudinal Study of Adult Health. Mood and anxiety disorders were ascertained using the Portuguese version of the Clinical Interview Schedule-Revised. Heart rate and its variability were extracted from 10-minute resting-state electrocardiograms. Regressions weighted by propensity scores were carried out to compare participants with and without depressive or anxiety disorders, as well as users and non-users of antidepressants, on heart rate and heart rate variability. Use of antidepressants was associated with increases in heart rate and decreases in its variability. Effects were most pronounced for the tricyclic antidepressants (Cohen's d, 0.72-0.81), followed by serotonin and norepinephrine reuptake inhibitors (Cohen's d, 0.42-0.95) and other antidepressants (Cohen's d, 0.37-0.40), relative to participants not on antidepressants. Only participants with generalized anxiety disorder showed robust, though small, increases in heart rate and decreases in its variability after propensity score weighting. The findings may, in part, underpin epidemiological findings of increased risk for cardiovascular morbidity and mortality. Many factors that have an adverse impact on cardiac activity were controlled for in this study, highlighting the importance of cardiovascular risk reduction strategies. Further study is needed to examine whether, how, and when such effects contribute to morbidity and mortality.

Assessing cardiac physical examination skills using simulation technology and real patients: a comparison study.

PubMed

Hatala, Rose; Issenberg, S Barry; Kassen, Barry; Cole, Gary; Bacchus, C Maria; Scalese, Ross J

2008-06-01

High-stakes assessments of doctors' physical examination skills often employ standardised patients (SPs) who lack physical abnormalities. Simulation technology provides additional opportunities to assess these skills by mimicking physical abnormalities. The current study examined the relationship between internists' cardiac physical examination competence as assessed with simulation technology compared with that assessed with real patients (RPs). The cardiac physical examination skills and bedside diagnostic accuracy of 28 internists were assessed during an objective structured clinical examination (OSCE). The OSCE included 3 modalities of cardiac patients: RPs with cardiac abnormalities; SPs combined with computer-based, audio-video simulations of auscultatory abnormalities, and a cardiac patient simulator (CPS) manikin. Four cardiac diagnoses and their associated cardiac findings were matched across modalities. At each station, 2 examiners independently rated a participant's physical examination technique and global clinical competence. Two investigators separately scored diagnostic accuracy. Inter-rater reliability between examiners for global ratings (GRs) ranged from 0.75-0.78 for the different modalities. Although there was no significant difference between participants' mean GRs for each modality, the correlations between participants' performances on each modality were low to modest: RP versus SP, r = 0.19; RP versus CPS, r = 0.22; SP versus CPS, r = 0.57 (P < 0.01). Methodological limitations included variability between modalities in the components contributing to examiners' GRs, a paucity of objective outcome measures and restricted case sampling. No modality provided a clear 'gold standard' for the assessment of cardiac physical examination competence. These limitations need to be addressed before determining the optimal patient modality for high-stakes assessment purposes.

National collection of embryo morphology data into Society for Assisted Reproductive Technology Clinic Outcomes Reporting System: associations among day 3 cell number, fragmentation and blastomere asymmetry, and live birth rate.

PubMed

Racowsky, Catherine; Stern, Judy E; Gibbons, William E; Behr, Barry; Pomeroy, Kimball O; Biggers, John D

2011-05-01

To evaluate the validity of collecting day 3 embryo morphology variables into the Society for Assisted Reproductive Technology Clinic Outcomes Reporting System (SART CORS). Retrospective. National database-SART CORS. Fresh autologous assisted reproductive technology (ART) cycles from 2006-2007 in which embryos were transferred singly (n=1,020) or in pairs (n=6,508) and embryo morphology was collected. None. Relationship between live birth, maternal age, and morphology of transferred day 3 embryos as defined by cell number, fragmentation, and blastomere symmetry. Logistic multiple regressions and receiver operating characteristic curve analyses were applied to determine specificity and sensitivity for correctly classifying embryos as either failures or successes. Live birth rate was positively associated with increasing cell number up to eight cells (<6 cells: 2.9%; 6 cells: 9.6%; 7 cells: 15.5%; 8 cells: 24.3%; and >8 cells: 16.2%), but was negatively associated with maternal age, increasing fragmentation, and asymmetry scores. An area under the receiver operating curve of 0.753 (95% confidence interval 0.740-0.766) was derived, with a sensitivity of 45.0%, a specificity of 83.2%, and 76.4% of embryos being correctly classified with a cutoff probability of 0.3. This analysis provides support for the validity of collecting morphology fields for day 3 embryos into SART CORS. Standardization of morphology collections will assist in controlling for embryo quality in future database analyses. Copyright © 2011 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Predicting the Use of Instructional Technology among Community College Instructors: An Extension of the Technology Acceptance Model (TAM)

ERIC Educational Resources Information Center

Miller, Emma Rebecca

2017-01-01

The purpose of this study was to determine what variables predict the use of instructional technology among community college instructors. Legislators, community college administrators, and students expect innovative lessons from instructors that use technology. This study addresses the problem of not knowing what predicts instructional technology…

Explaining Technology Integration in K-12 Classrooms: A Multilevel Path Analysis Model

ERIC Educational Resources Information Center

Liu, Feng; Ritzhaupt, Albert D.; Dawson, Kara; Barron, Ann E.

2017-01-01

The purpose of this research was to design and test a model of classroom technology integration in the context of K-12 schools. The proposed multilevel path analysis model includes teacher, contextual, and school related variables on a teacher's use of technology and confidence and comfort using technology as mediators of classroom technology…

Impact of residual defects caused by extension ion implantation in FinFETs on parasitic resistance and its fluctuation

NASA Astrophysics Data System (ADS)

Matsukawa, Takashi; Liu, Yongxun; Mori, Takahiro; Morita, Yukinori; Otsuka, Shintaro; O'uchi, Shin-ichi; Fuketa, Hiroshi; Migita, Shinji; Masahara, Meishoku

2017-06-01

The influence of extension doping on parasitic resistance and its variability has been investigated for FinFETs. Electrical characterization of FinFETs and crystallinity evaluation of the doped fin structure are carried out for different fin thicknesses and different donor species for ion implantation, i.e., As and P. Reducing the fin thickness and the use of donor species with a larger mass cause serious degradation in the variability and median value of the parasitic resistance. Crystallinity evaluation by transmission electron microscope reveals that significant crystal defects remain after dopant activation annealing for the cases of smaller fin thickness and the implanted dopant with a larger mass. The unrecovered defects cause serious degradation in the parasitic resistance and its variability. In 1998, he joined the Electrotechnical Laboratory, which is former organization of National Institute of Advanced Industrial Science and Technology (AIST). He has been working on development of front-end process technology, variability issues of the FinFETs and technologies for suppressing the variability. He is now a group leader of the AIST and leads the research on the silicon-based CMOS devices. He is a member of the IEEE Electron Devices Society, and the Japan Society of Applied Physics.

Intra-Site Variability in the Still Bay Fauna at Blombos Cave: Implications for Explanatory Models of the Middle Stone Age Cultural and Technological Evolution

PubMed Central

Discamps, Emmanuel; Henshilwood, Christopher Stuart

2015-01-01

To explain cultural and technological innovations in the Middle Stone Age (MSA) of southern Africa, scholars invoke several factors. A major question in this research theme is whether MSA technocomplexes are adapted to a particular set of environmental conditions and subsistence strategies or, on the contrary, to a wide range of different foraging behaviours. While faunal studies provide key information for addressing these factors, most analyses do not assess intra-technocomplex variability of faunal exploitation (i.e. variability within MSA phases). In this study, we assess the spatial variability of the Still Bay fauna in one phase (M1) of the Blombos Cave sequence. Analyses of taxonomic composition, taphonomic alterations and combustion patterns reveal important faunal variability both across space (lateral variation in the post-depositional history of the deposits, spatial organisation of combustion features) and over time (fine-scale diachronic changes throughout a single phase). Our results show how grouping material prior to zooarchaeological interpretations (e.g. by layer or phase) can induce a loss of information. Finally, we discuss how multiple independent subdivisions of archaeological sequences can improve our understanding of both the timing of different changes (for example in technology, culture, subsistence, environment) and how they may be inter-related. PMID:26658195

Player-Tracking Technology: Half-Full or Half-Empty Glass?

PubMed

Buchheit, Martin; Simpson, Ben Michael

2017-04-01

With the ongoing development of microtechnology, player tracking has become one of the most important components of load monitoring in team sports. The 3 main objectives of player tracking are better understanding of practice (provide an objective, a posteriori evaluation of external load and locomotor demands of any given session or match), optimization of training-load patterns at the team level, and decision making on individual players' training programs to improve performance and prevent injuries (eg, top-up training vs unloading sequences, return to play progression). This paper discusses the basics of a simple tracking approach and the need to integrate multiple systems. The limitations of some of the most used variables in the field (including metabolic-power measures) are debated, and innovative and potentially new powerful variables are presented. The foundations of a successful player-monitoring system are probably laid on the pitch first, in the way practitioners collect their own tracking data, given the limitations of each variable, and how they report and use all this information, rather than in the technology and the variables per se. Overall, the decision to use any tracking technology or new variable should always be considered with a cost/benefit approach (ie, cost, ease of use, portability, manpower/ability to affect the training program).

Intra-Site Variability in the Still Bay Fauna at Blombos Cave: Implications for Explanatory Models of the Middle Stone Age Cultural and Technological Evolution.

PubMed

Discamps, Emmanuel; Henshilwood, Christopher Stuart

2015-01-01

To explain cultural and technological innovations in the Middle Stone Age (MSA) of southern Africa, scholars invoke several factors. A major question in this research theme is whether MSA technocomplexes are adapted to a particular set of environmental conditions and subsistence strategies or, on the contrary, to a wide range of different foraging behaviours. While faunal studies provide key information for addressing these factors, most analyses do not assess intra-technocomplex variability of faunal exploitation (i.e. variability within MSA phases). In this study, we assess the spatial variability of the Still Bay fauna in one phase (M1) of the Blombos Cave sequence. Analyses of taxonomic composition, taphonomic alterations and combustion patterns reveal important faunal variability both across space (lateral variation in the post-depositional history of the deposits, spatial organisation of combustion features) and over time (fine-scale diachronic changes throughout a single phase). Our results show how grouping material prior to zooarchaeological interpretations (e.g. by layer or phase) can induce a loss of information. Finally, we discuss how multiple independent subdivisions of archaeological sequences can improve our understanding of both the timing of different changes (for example in technology, culture, subsistence, environment) and how they may be inter-related.

Variability of Basal Rate Profiles in Insulin Pump Therapy and Association with Complications in Type 1 Diabetes Mellitus.

PubMed

Laimer, Markus; Melmer, Andreas; Mader, Julia K; Schütz-Fuhrmann, Ingrid; Engels, Heide-Rose; Götz, Gabriele; Pfeifer, Martin; Hermann, Julia M; Stettler, Christoph; Holl, Reinhard W

2016-01-01

Traditionally, basal rate profiles in continuous subcutaneous insulin infusion therapy are individually adapted to cover expected insulin requirements. However, whether this approach is indeed superior to a more constant BR profile has not been assessed so far. This study analysed the associations between variability of BR profiles and acute and chronic complications in adult type 1 diabetes mellitus. BR profiles of 3118 female and 2427 male patients from the "Diabetes-Patienten-Verlaufsdokumentation" registry from Germany and Austria were analysed. Acute and chronic complications were recorded 6 months prior and after the most recently documented basal rate. The "variability index" was calculated as variation of basal rate intervals in percent and describes the excursions of the basal rate intervals from the median basal rate. The variability Index correlated positively with severe hypoglycemia (r = .06; p<0.001), hypoglycemic coma (r = .05; p = 0.002), and microalbuminuria (r = 0.05; p = 0.006). In addition, a higher variability index was associated with higher frequency of diabetic ketoacidosis (r = .04; p = 0.029) in male adult patients. Logistic regression analysis adjusted for age, gender, duration of disease and total basal insulin confirmed significant correlations of the variability index with severe hypoglycemia (β = 0.013; p<0.001) and diabetic ketoacidosis (β = 0.012; p = 0.017). Basal rate profiles with higher variability are associated with an increased frequency of acute complications in adults with type 1 diabetes.

Evaluation of the effect of reactant gases mass flow rates on power density in a polymer electrolyte membrane fuel cell

NASA Astrophysics Data System (ADS)

Kahveci, E. E.; Taymaz, I.

2018-03-01

In this study it was experimentally investigated the effect of mass flow rates of reactant gases which is one of the most important operational parameters of polymer electrolyte membrane (PEM) fuel cell on power density. The channel type is serpentine and single PEM fuel cell has an active area of 25 cm2. Design-Expert 8.0 (trial version) was used with four variables to investigate the effect of variables on the response using. Cell temperature, hydrogen mass flow rate, oxygen mass flow rate and humidification temperature were selected as independent variables. In addition, the power density was used as response to determine the combined effects of these variables. It was kept constant cell and humidification temperatures while changing mass flow rates of reactant gases. From the results an increase occurred in power density with increasing the hydrogen flow rates. But oxygen flow rate does not have a significant effect on power density within determined mass flow rates.

Parents are reluctant to use technological means of communication in pediatric day care.

PubMed

Murto, Kimmo; Bryson, Gregory L; Abushahwan, Ibrahim; King, Jim; Moher, David; El-Emam, Khaled; Splinter, William

2008-04-01

We hypothesized that advanced information and communication technology (ICT) would be acceptable to parents in a pediatric surgical, and diagnostic imaging day care setting. After Ethics Committee approval, we distributed surveys, over a one-month period, to parents of children arriving for day care surgery or diagnostic imaging. Parents indicated their acceptance of various proposed modes of postoperative discussion of healthcare i.e.; face-to-face, videophone, or telephone. Parents were also asked to describe their receptiveness to scheduling non-emergency hospital appointments online and to receiving electronic media describing their child's surgery and postoperative management. Parental education, income, and familiarity with the Internet were also assessed. A total of 451 surveys (84% response rate) were returned. Most parents (95%) had access to the Internet and 70% did their banking online. Forty-two percent of the parents had at least a university education and 63% had an annual family income > $50,000 Canadian. The majority of parents (98%) accepted face-to-face interaction, while only 35% and 37% of parents were receptive to videophone and telephone interviews, respectively. Computer availability (P = 0.001) and online banking (P = 0.011) were the only variables that predicted those parents who were in favour of using videophone technology. Parents were receptive to instruction electronic media (80%) and booking appointments online (61%). A well-educated and technologically sophisticated parent population does not favour advanced communication technologies over simple, face-to-face interaction in an in-hospital setting. These parents are prepared to receive technology-based information about their child's surgery and to schedule non-emergency hospital appointments online.

Adapting to extreme events related to natural variability and climate change: the imperative of coupling technology with strong regulation and governance.

PubMed

Kythreotis, A P; Mercer, T G; Frostick, L E

2013-09-03

In recent years there has been an increase in extreme events related to natural variability (such as earthquakes, tsunamis and hurricanes) and climate change (such as flooding and more extreme weather). Developing innovative technologies is crucial in making society more resilient to such events. However, little emphasis has been placed on the role of human decision-making in maximizing the positive impacts of technological developments. This is exacerbated by the lack of appropriate adaptation options and the privatization of existing infrastructure, which can leave people exposed to increasing risk. This work examines the need for more robust government regulation and legislation to complement developments and innovations in technology in order to protect communities against such extreme events.

Priority survey between indicators and analytic hierarchy process analysis for green chemistry technology assessment

PubMed Central

Kim, Sungjune; Hong, Seokpyo; Ahn, Kilsoo; Gong, Sungyong

2015-01-01

Objectives This study presents the indicators and proxy variables for the quantitative assessment of green chemistry technologies and evaluates the relative importance of each assessment element by consulting experts from the fields of ecology, chemistry, safety, and public health. Methods The results collected were subjected to an analytic hierarchy process to obtain the weights of the indicators and the proxy variables. Results These weights may prove useful in avoiding having to resort to qualitative means in absence of weights between indicators when integrating the results of quantitative assessment by indicator. Conclusions This study points to the limitations of current quantitative assessment techniques for green chemistry technologies and seeks to present the future direction for quantitative assessment of green chemistry technologies. PMID:26206364

Effects of linear ablation at the isthmus between the tricuspid annulus and inferior vena cava for atrial flutter on autonomic nervous activity: analysis of heart rate variability.

PubMed

Li, Aiyan; Kuga, Keisuke; Suzuki, Akihiro; Endo, Masae; Niho, Bumpei; Enomoto, Mami; Kanemoto, Miyako; Yamaguchi, Iwao

2002-01-01

Heart rate is largely affected by the autonomic nervous system. However, little is known about the anatomic pathway of autonomic nerve fibers innervating the sinus node. The present study: (1) evaluates the effects of cavotricuspid isthmus ablation for common atrial flutter (AFL) on autonomic nervous function by using heart rate variability analysis, and (2) investigates the distribution of autonomic nerve pathways innervating the sinus node. Twelve patients with paroxysmal common atrial flutter who maintained sinus rhythm both before and after radiofrequency ablation were selected for the study. Holter ambulatory recordings were performed before and after (2.3 +/- 1.0 days) radiofrequency ablation of cavotricuspid isthmus. Heart rate and time domain (SDANN, rMSSD, pNN50) and frequency domain (low frequency (LF), high frequency (HF), LF/HF) analysis of heart rate variability were compared before and after ablation. Mean heart rate did not change significantly after ablation (59 +/- 6 vs 61 +/- 9 beats/min); parasympathetic indices of heart rate variability (SDANN, rMSSD, pNN50, HF) did not change significantly (110 +/- 37 vs 117 +/- 20 ms; 32 +/- 21 vs 28 +/- 9 ms; 4.8 +/- 0.9 vs 4.7 +/- 0.71n(ms2)); and sympathetic indices of heart rate variability (LF/HF) did not change significantly (1.1 +/- 0.2 vs 1.2 +/- 0.1). Cavotricuspid isthmus ablation for atrial flutter did not significantly change heart rate and heart rate variability because parasympathetic and sympathetic fibers innervating the sinus node are scarce in this region.

Variability of absorption heat pump efficiency for domestic water heating and space heating based on time-weighted bin analysis

DOE PAGES

Ally, Moonis Raza; Sharma, Vishaldeep

2017-11-02

Natural gas-driven absorption heat pumps are under renewed scrutiny as a viable technology for space conditioning and water heating for residential and commercial applications because of natural gas production trends, pricing, and the speculation that it might be a “bridge fuel” in the global transition towards energy sustainability. Since any level of natural gas combustion contributes to atmospheric carbon dioxide accumulation, the merits of natural gas consuming absorption technology are re-examined in this paper from the point of view of expected efficiency throughout the United States using a time-weighted bin temperature analysis. Such analyses are necessary because equipment standards formore » rated performance is restricted to one set ambient condition, whereas in actual practice, the absorption heat pump (AHP) must perform over a considerably wider range of external conditions, where its efficiency may be vastly different from that at the rated condition. Quantification of variation in efficiency and system performance are imperative to address how to provide the desired utility with the least environmental impact. In this paper, we examine limiting features in absorption heat pumps and relate it to systemic performances in sixteen cities across all eight climate zones in the U.S, each containing fifteen bin temperatures. The results indicate that the true expectation of performance of an AHP is significantly less than what might be optimized for the rated condition. Statistical measures of the variation in water heating COPs show that for most cities, the COP at the rated conditions is outside the 95% Confidence Interval. Moreover, it is concluded that deployment of absorption heat pump water heaters (AHPWH) may be restricted geographically by outdoor temperature constraints.« less

Variability of absorption heat pump efficiency for domestic water heating and space heating based on time-weighted bin analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ally, Moonis Raza; Sharma, Vishaldeep

Natural gas-driven absorption heat pumps are under renewed scrutiny as a viable technology for space conditioning and water heating for residential and commercial applications because of natural gas production trends, pricing, and the speculation that it might be a “bridge fuel” in the global transition towards energy sustainability. Since any level of natural gas combustion contributes to atmospheric carbon dioxide accumulation, the merits of natural gas consuming absorption technology are re-examined in this paper from the point of view of expected efficiency throughout the United States using a time-weighted bin temperature analysis. Such analyses are necessary because equipment standards formore » rated performance is restricted to one set ambient condition, whereas in actual practice, the absorption heat pump (AHP) must perform over a considerably wider range of external conditions, where its efficiency may be vastly different from that at the rated condition. Quantification of variation in efficiency and system performance are imperative to address how to provide the desired utility with the least environmental impact. In this paper, we examine limiting features in absorption heat pumps and relate it to systemic performances in sixteen cities across all eight climate zones in the U.S, each containing fifteen bin temperatures. The results indicate that the true expectation of performance of an AHP is significantly less than what might be optimized for the rated condition. Statistical measures of the variation in water heating COPs show that for most cities, the COP at the rated conditions is outside the 95% Confidence Interval. Moreover, it is concluded that deployment of absorption heat pump water heaters (AHPWH) may be restricted geographically by outdoor temperature constraints.« less

Diminished heart rate complexity in adolescent girls: a sign of vulnerability to anxiety disorders?

PubMed

Fiol-Veny, Aina; De la Torre-Luque, Alejandro; Balle, Maria; Bornas, Xavier

2018-07-01

Diminished heart rate variability has been found to be associated with high anxiety symptomatology. Since adolescence is the period of onset for many anxiety disorders, this study aimed to determine sex- and anxiety-related differences in heart rate variability and complexity in adolescents. We created four groups according to sex and anxiety symptomatology: high-anxiety girls (n = 24) and boys (n = 25), and low-anxiety girls (n = 22) and boys (n = 24) and recorded their cardiac function while they performed regular school activities. A series of two-way (sex and anxiety) MANOVAs were performed on time domain variability, frequency domain variability, and non-linear complexity. We obtained no multivariate interaction effects between sex and anxiety, but highly anxious participants had lower heart rate variability than the low-anxiety group. Regarding sex, girls showed lower heart rate variability and complexity than boys. The results suggest that adolescent girls have a less flexible cardiac system that could be a marker of the girls' vulnerability to developing anxiety disorders.

Identification of low and high frequency ranges for heart rate variability and blood pressure variability analyses using pharmacological autonomic blockade with atropine and propranolol in swine.

USDA-ARS?s Scientific Manuscript database

Understanding autonomic nervous system functioning, which mediates behavioral and physiological responses to stress, offers great potential for evaluation of farm animal stress and welfare. Evaluation of heart rate variability (HRV) and blood pressure variability (BPV), using time and frequency doma...

Bedload transport rates in a gravel bedded-river derived from high-resolution monitoring using seismic impact plates

NASA Astrophysics Data System (ADS)

Downs, Peter; Soar, Philip

2015-04-01

Accurate characterisation of bedload transport rates is critical for a better understanding of geomorphological process dynamics, aquatic habitats, sediment budgets and strategies for catchment-scale initiatives in sediment management under conditions of climate change. However, rate estimation is challenging in practice: direct measurements are costly and logistically difficult to achieve with acceptable accuracy over geomorphologically-relevant time periods, and the uncertainty in transport rates predicted from empirical formulae and numerical simulation is rarely below 50 per cent. Partly reflecting these issues, passive technologies for continuous bedload monitoring are becoming increasingly popular. Sensors such as seismic impact plates offer the opportunity to characterise bedload activity at exceptionally high resolution - monitoring from the River Avon, (Devon, UK) indicated that despite significant intra-event and between-plate differences in apparent bedload transport aggregated over 5-minute periods, the magnitude-frequency product of discharge and impact frequency result in a highly plausible effective discharge, supporting the potential value of impact plates as indicators of relative sediment transport loads over annual timescales. Whereas the focus in bedload rate estimation to date has been on developing satisfactory sediment rating curves from detection signals, we instead develop a method for directly estimating bedload transport rates from impact plate data as a function of intensity of transport (count, n, per second), bed material mass (kg) and cross-stream transport variability. Bulk sediment samples are converted to a mass in transit for each instantaneous discharge according to the intensity of transport and a Monte Carlo simulation of the load in transit determined at random from the bed material particle size distribution. The lower detection threshold is determined using experimental calibration and the upper size limit is determined from incipient motion estimates thereby establishing the fraction of transported material sensed by the plates. The lateral variability in transport rates across the cross-section is estimated empirically using multiple plates or by interpolation. This procedure provides a potentially affordable and robust method of achieving uncertainty-bound indicative measures of bedload transport with the potential for wide-ranging practical applications.

Outcomes of laparoscopic resection of Meckel's diverticulum are equivalent to open laparotomy.

PubMed

Ezekian, Brian; Leraas, Harold J; Englum, Brian R; Gilmore, Brian F; Reed, Christopher; Fitzgerald, Tamara N; Rice, Henry E; Tracy, Elisabeth T

2018-03-15

Meckel's diverticulum (MD) is a common congenital anomaly caused by failure of involution of the omphalomesenteric duct. Enthusiasm for minimally invasive surgery (MIS) in children has burgeoned as technologies have advanced, but the outcomes of laparoscopic resection in comparison to open laparotomy for MD remain poorly defined. We queried a large national database to compare current practice patterns and clinical outcomes between surgical approaches for MD in the pediatric population. The National Surgical Quality Improvement Program-Pediatric (NSQIP-Ped) database was queried for patients undergoing surgical intervention for MD (2011-2014). Patients were stratified by surgical approach. Baseline characteristics, intraoperative variables, and perioperative complications were compared by univariate analysis using Pearson's χ 2 test for categorical variables and Kruskall-Wallis test for continuous variables. Primary outcomes of interest were length of stay (LOS), rate of readmission, and 30-day mortality. Secondary outcomes included operative time, anesthesia time, postoperative complications, and rates of reoperation. A total of 148 cases of MD were identified, of which 73 (49.3%) were initially managed with a laparoscopic approach and 75 (50.7%) were managed with an open approach. We found a high rate of conversion from laparoscopy to an open approach (20/73 or 27.4%). The median age of the laparoscopic group was higher than the open group (8.3 vs. 2.5years, p<0.001). Operative and anesthesia time, LOS, 30-day mortality, post-operative complications, and rates of reoperation and readmission were similar between groups (all p>0.05). Nearly half of all resections for MD in children are now approached laparoscopically. This approach has equivalent outcomes to traditional open laparotomy. More widespread use of a hybrid approach with laparoscopy and exteriorization of the small bowel through an extended port site may facilitate avoiding open laparotomy. Routine conversion to open for palpation of the MD or segmental small bowel resection should be avoided in the absence of compelling intra-operative findings or operative complications. Level III (retrospective comparative study). Copyright © 2018 Elsevier Inc. All rights reserved.

New Frontiers for Applications of Thermal Infrared Imaging Devices: Computational Psychopshysiology in the Neurosciences

PubMed Central

Cardone, Daniela; Merla, Arcangelo

2017-01-01

Thermal infrared imaging has been proposed, and is now used, as a tool for the non-contact and non-invasive computational assessment of human autonomic nervous activity and psychophysiological states. Thanks to a new generation of high sensitivity infrared thermal detectors and the development of computational models of the autonomic control of the facial cutaneous temperature, several autonomic variables can be computed through thermal infrared imaging, including localized blood perfusion rate, cardiac pulse rate, breath rate, sudomotor and stress responses. In fact, all of these parameters impact on the control of the cutaneous temperature. The physiological information obtained through this approach, could then be used to infer about a variety of psychophysiological or emotional states, as proved by the increasing number of psychophysiology or neurosciences studies that use thermal infrared imaging. This paper presents a review of the principal achievements of thermal infrared imaging in computational psychophysiology, focusing on the capability of the technique for providing ubiquitous and unwired monitoring of psychophysiological activity and affective states. It also presents a summary on the modern, up-to-date infrared sensors technology. PMID:28475155

New Frontiers for Applications of Thermal Infrared Imaging Devices: Computational Psychopshysiology in the Neurosciences.

PubMed

Cardone, Daniela; Merla, Arcangelo

2017-05-05

Thermal infrared imaging has been proposed, and is now used, as a tool for the non-contact and non-invasive computational assessment of human autonomic nervous activity and psychophysiological states. Thanks to a new generation of high sensitivity infrared thermal detectors and the development of computational models of the autonomic control of the facial cutaneous temperature, several autonomic variables can be computed through thermal infrared imaging, including localized blood perfusion rate, cardiac pulse rate, breath rate, sudomotor and stress responses. In fact, all of these parameters impact on the control of the cutaneous temperature. The physiological information obtained through this approach, could then be used to infer about a variety of psychophysiological or emotional states, as proved by the increasing number of psychophysiology or neurosciences studies that use thermal infrared imaging. This paper presents a review of the principal achievements of thermal infrared imaging in computational psychophysiology, focusing on the capability of the technique for providing ubiquitous and unwired monitoring of psychophysiological activity and affective states. It also presents a summary on the modern, up-to-date infrared sensors technology.

Center for Research and Development in Teaching.

ERIC Educational Resources Information Center

Bush, Robert N.; Gage, N.L.

1968-01-01

The major portion of this report summarizes prior research at the Stanford Center for Research and Development in Teaching within the framework of three domains of variables: the behavioral or directly observable variables; the personological or those inferred from tests; and those institutional variables which affect the social, technological,…

Blade and bladelet production at Hohle Fels Cave, AH IV in the Swabian Jura and its importance for characterizing the technological variability of the Aurignacian in Central Europe

PubMed Central

Conard, Nicholas J.

2018-01-01

Hohle Fels Cave in the Ach Valley of Southwestern Germany exhibits an Aurignacian sequence of 1 m thickness within geological horizons (GH) 6–8. The deposition of the layers took place during mild and cold phases between at least 42 ka (GI 10) and 36 ka calBP (GI 7). We present below a technological study of blade and bladelet production from AH IV (GH 7) at Hohle Fels. Our analyses show that blade manufacture is relatively constant, while bladelet production displays a high degree of variability in order to obtain different blanks. Knappers used a variety of burins as cores to produce fine bladelets. The results reveal a new variant of the Aurignacian in the Swabian Jura primarily characterized by the production of bladelets and microliths from burin-cores. The artefacts from the Swabian Aurignacian are technologically and functionally more diverse than earlier studies of the Geißenklösterle and Vogelherd sequences have suggested. The technological analyses presented here challenge the claim that the typo-chronological system from Southwestern Europe can be applied to the Central European Aurignacian. Instead, we emphasize the impact of technological and functional variables within the Aurignacian of the Swabian Jura. PMID:29630601

Within-Hospital Variation in 30-Day Adverse Events: Implications for Measuring Quality.

PubMed

Burke, Robert E; Glorioso, Thomas; Barón, Anna K; Kaboli, Peter J; Ho, P Michael

Novel measures of hospital quality are needed. Because quality improvement efforts seek to reduce variability in processes and outcomes, hospitals with higher variability in adverse events may be delivering poorer quality care. We sought to evaluate whether within-hospital variability in adverse events after a procedure might function as a quality metric that is correlated with facility-level mortality rates. We analyzed all percutaneous coronary interventions (PCIs) performed in the Veterans Health Administration (VHA) system from 2007 to 2013 to evaluate the correlation between within-hospital variability in 30-day postdischarge adverse events (readmission, emergency department visit, and repeat revascularization), and facility-level mortality rates, after adjustment for patient demographics, comorbidities, PCI indication, and PCI urgency. The study cohort included 47,567 patients at 48 VHA hospitals. The overall 30-day adverse event rate was 22.0% and 1-year mortality rate was 4.9%. The most variable sites had relative changes of 20% in 30-day rates of adverse events period-to-period. However, within-hospital variability in 30-day events was not correlated with 1-year mortality rates (correlation coefficient = .06; p = .66). Thus, measuring within-hospital variability in postdischarge adverse events may not improve identification of low-performing hospitals. Evaluation in other conditions, populations, and in relationship with other quality metrics may reveal stronger correlations with care quality.

Anonymous broadcasting of classical information with a continuous-variable topological quantum code

NASA Astrophysics Data System (ADS)

Menicucci, Nicolas C.; Baragiola, Ben Q.; Demarie, Tommaso F.; Brennen, Gavin K.

2018-03-01

Broadcasting information anonymously becomes more difficult as surveillance technology improves, but remarkably, quantum protocols exist that enable provably traceless broadcasting. The difficulty is making scalable entangled resource states that are robust to errors. We propose an anonymous broadcasting protocol that uses a continuous-variable surface-code state that can be produced using current technology. High squeezing enables large transmission bandwidth and strong anonymity, and the topological nature of the state enables local error mitigation.

An Assessment of Pathology Resident Access to and Use of Technology: A Nationwide Survey.

PubMed

Vallangeon, Bethany D; Hawley, Jeffrey S; Sloane, Richard; Bean, Sarah M

2017-03-01

- Current technologies including digital slide scanners and handheld devices can revolutionize clinical practice and pathology graduate medical education (GME). The extent to which these technologies are used in pathology GME is unknown. - To determine the types of technologies used, usage amount, and how they are integrated into pathology residency/fellowship programs nationwide. - A 40-question online survey for residents/fellows was developed and administered via the Research Electronic Data Capture System after institutional review board approval. - Fifty-two program directors (37%) gave permission for participation. One-hundred seventy-one responses were received (18% response rate). Most respondents have access to personal technology (laptop = 78% [134 of 171]), smartphone = 81% [139 of 171], tablet = 49% [84 of 171]), and Web-based digital slide collections (82%, 141 of 171). Few residents are provided electronic devices by their programs (laptop = 22% [38 of 171], smartphone = 0.5% [1 of 171], and tablet = 12% [21 of 171]). Fifty-nine percent have access to digital slide scanners, 33% have access to a program-created database of digitized slides, and 52% use telepathology. Fifteen percent have access to asynchronous learning. Of those with access to video-recorded conferences, 89% review them. Program size was significantly positively correlated with resident access to program-provided laptops (P = .02) and tablets (P < .001), digital slide scanners (P = .01), and telepathology (P = .001). Of all devices, program-provided laptops are used most for professional work (60.5% use this device for more than 5 hours per day). - Most residents report access to multiple types of innovative technology, but incorporation of these tools within pathology training programs is highly variable. Opportunities for incorporating innovative technologies exist and could be further explored.

7 CFR 1980.423 - Interest rates.

Code of Federal Regulations, 2013 CFR

2013-01-01

... variable as long as they are legal. Interest rates will be those rates customarily charged borrowers in... and borrower. The variable interest rate may be adjusted at different intervals during the term of the... areas, whether the monetary recovery would be increased by proceeding immediately to liquidation, if...

An electronic flow control system for a variable-rate tree sprayer

USDA-ARS?s Scientific Manuscript database

Precise modulation of nozzle flow rates is a critical measure to achieve variable-rate spray applications. An electronic flow rate control system accommodating with microprocessors and pulse width modulation (PWM) controlled solenoid valves was designed to manipulate the output of spray nozzles inde...

Attention Induced Gain Stabilization in Broad and Narrow-Spiking Cells in the Frontal Eye-Field of Macaque Monkeys

PubMed Central

Brandt, Christian; Dasilva, Miguel; Gotthardt, Sascha; Chicharro, Daniel; Panzeri, Stefano; Distler, Claudia

2016-01-01

Top-down attention increases coding abilities by altering firing rates and rate variability. In the frontal eye field (FEF), a key area enabling top-down attention, attention induced firing rate changes are profound, but its effect on different cell types is unknown. Moreover, FEF is the only cortical area investigated in which attention does not affect rate variability, as assessed by the Fano factor, suggesting that task engagement affects cortical state nonuniformly. We show that putative interneurons in FEF of Macaca mulatta show stronger attentional rate modulation than putative pyramidal cells. Partitioning rate variability reveals that both cell types reduce rate variability with attention, but more strongly so in narrow-spiking cells. The effects are captured by a model in which attention stabilizes neuronal excitability, thereby reducing the expansive nonlinearity that links firing rate and variance. These results show that the effect of attention on different cell classes and different coding properties are consistent across the cortical hierarchy, acting through increased and stabilized neuronal excitability. SIGNIFICANCE STATEMENT Cortical processing is critically modulated by attention. A key feature of this influence is a modulation of “cortical state,” resulting in increased neuronal excitability and resilience of the network against perturbations, lower rate variability, and an increased signal-to-noise ratio. In the frontal eye field (FEF), an area assumed to control spatial attention in human and nonhuman primates, firing rate changes with attention occur, but rate variability, quantified by the Fano factor, appears to be unaffected by attention. Using recently developed analysis tools and models to quantify attention effects on narrow- and broad-spiking cell activity, we show that attention alters cortical state strongly in the FEF, demonstrating that its effect on the neuronal network is consistent across the cortical hierarchy. PMID:27445139

Technology Implementation in Education--Identifying Barriers to Fidelity

ERIC Educational Resources Information Center

Dennis, William J.; Johnson, Daniel L.; Monroe, Arla K.

2012-01-01

This report describes a problem-based learning project focused on determining the barriers to the implementation of technological innovations. Research findings offered evidence that properly executed technology implementation is an instructional variable related to student achievement; yet, school district leaders are faced with the problem of…

Technology Implementation in Education--Identifying Barriers to Fidelity

ERIC Educational Resources Information Center

Monroe, Arla K.; Dennis, William J.; Johnson, Daniel L.

2012-01-01

This report describes a problem-based learning project focused on determining the barriers to the implementation of technological innovations. that properly executed technology implementation is an instructional variable related to student achievement; yet, school district leaders are faced with the problem of recognizing and identifying the…

[The incidence of human papilloma virus associated vulvar cancer in younger women is increasing and wide local excision with sentinel lymph node biopsie has become standard].

PubMed

Fehr, Mathias K

2011-10-01

Sentinel lymph node (SLN) dissections have been shown to be sensitive for the evaluation of nodal basins for metastatic disease and are associated with decreased short-term and long-term morbidity when compared with complete lymph node dissection. There has been increasing interest in the use of SLN technology in gynecologic cancers. This review assesses the current evidence-based literature for the use of SLN dissections in gynecologic malignancies. Recent literature continues to support the safety and feasibility of SLN biopsy for early stage vulvar cancer with negative predictive value approaching 100 % and low false negative rates. Alternatively, for endometrial cancer most studies have reported low false-negative rates, with variable sensitivities and have reported low detection rates of the sentinel node. Studies examining the utility of SLN biopsy in early-stage cervical cancer remain promising with detection rates, sensitivities, and false-negative rates greater than 90 % for stage 1B1 tumors. SLN dissections have been shown to be effective and safe in certain, select vulvar cancer patients and can be considered an alternative surgical approach for these patients. For endometrial and cervical cancer, SLN dissection continues to have encouraging results and however needs further investigation.

75 FR 61746 - New England Wire Technologies Corp; Supplemental Notice That Initial Market-Based Rate Filing...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-06

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER10-2754-000] New England Wire Technologies Corp; Supplemental Notice That Initial Market-Based Rate Filing Includes Request for...-referenced proceeding of New England Wire Technologies Corp's application for market-based rate authority...

Speed control variable rate irrigation

USDA-ARS?s Scientific Manuscript database

Speed control variable rate irrigation (VRI) is used to address within field variability by controlling a moving sprinkler’s travel speed to vary the application depth. Changes in speed are commonly practiced over areas that slope, pond or where soil texture is predominantly different. Dynamic presc...

Automated support tool for variable rate irrigation prescriptions

USDA-ARS?s Scientific Manuscript database

Variable rate irrigation (VRI) enables center pivot management to better meet non-uniform water and fertility needs. This is accomplished through correctly matching system water application with spatial and temporal variability within the field. A computer program was modified to accommodate GIS dat...

Comparison of crop stress and soil maps to enhance variable rate irrigation prescriptions

USDA-ARS?s Scientific Manuscript database

Soil textural variability within many irrigated fields diminishes the effectiveness of conventional irrigation management, and scheduling methods that assume uniform soil conditions may produce less than satisfactory results. Furthermore, benefits of variable-rate application of agrochemicals, seeds...

Development of a multispectral sensor for crop canopy temperature measurement

USDA-ARS?s Scientific Manuscript database

Quantifying spatial and temporal variability in plant stress has precision agriculture applications in controlling variable rate irrigation and variable rate nutrient application. One approach to plant stress detection is crop canopy temperature measurement by the use of thermographic or radiometric...

Zone edge effects with variable rate irrigation

USDA-ARS?s Scientific Manuscript database

Variable rate irrigation (VRI) systems may offer solutions to enhance water use efficiency by addressing variability within a field. However, the design of VRI systems should be considered to maximize application uniformity within sprinkler zones, while minimizing edge effects between such zones alo...

Comparison of body composition, heart rate variability, aerobic and anaerobic performance between competitive cyclists and triathletes

PubMed Central

Arslan, Erşan; Aras, Dicle

2016-01-01

[Purpose] The aim of this study was to compare the body composition, heart rate variability, and aerobic and anaerobic performance between competitive cyclists and triathletes. [Subjects] Six cyclists and eight triathletes with experience in competitions voluntarily participated in this study. [Methods] The subjects’ body composition was measured with an anthropometric tape and skinfold caliper. Maximal oxygen consumption and maximum heart rate were determined using the incremental treadmill test. Heart rate variability was measured by 7 min electrocardiographic recording. The Wingate test was conducted to determine anaerobic physical performance. [Results] There were significant differences in minimum power and relative minimum power between the triathletes and cyclists. Anthropometric characteristics and heart rate variability responses were similar among the triathletes and cyclists. However, triathletes had higher maximal oxygen consumption and lower resting heart rates. This study demonstrated that athletes in both sports have similar body composition and aerobic performance characteristics. PMID:27190476

[Heart rate variability of subjects when the instruction reading and their interrelations with the effectiveness of the follow-visual-motor activities].

PubMed

Murtazina, E P

2015-01-01

Investigation of the processes of studying human instructions relevant follow-up in terms of systemic mechanisms of learning and memory processes, and moreover affects such a fundamental issue as psychophysiology focused attention, understanding the meaning of the information provided and the formation of social motivation in human activities. Analysis of heart rate variability in reading the instructions compared to the initial state of operational rest showed that this stage of the activity causes pronounced emotional stress, which is manifested in increased heart rate, decrease in variability and pronounced changes in the spectral characteristics of heart rate. Besides, it was revealed that heart rate variability in a state of operational rest before testing, and in the process of reading instructions positively correlated with the duration of the instruction reading and inversely correlated with effectiveness and the level of resistance of the subjects to the error after error when follow-up activities. Showing pronounced gender differences in the relationships between changes in the variability of heart rate when reading the instructions and the subsequent execution indicators of visual-motor test.

Variety is not the spice of life for people with autism spectrum disorders: frequency ratings of central, variable and inappropriate aspects of common real-life events.

PubMed

Loth, Eva; Happé, Francesca; Gómez, Juan Carlos

2010-06-01

This study used a novel rating task to investigate whether high-functioning individuals with autism spectrum disorder (ASD) have difficulties distinguishing essential from variable aspects of familiar events. Participants read stories about everyday events and judged how often central, variable, and inappropriate event-components normally occur in this type of situation. The ASD boys made significantly more errors than the typically developing boys in rating the occurrences of variable aspects. In both groups, ratings of variable aspects were age-related, but in the ASD boys, they were also related to theory of mind and weak coherence test scores, and to severity of autistic symptoms. Implications for the understanding of some repetitive behaviours, such as the tendency to adhere to inflexible routines, are discussed.

Past Year Technology-Involved Peer Harassment Victimization and Recent Depressive Symptoms and Suicide Ideation Among a National Sample of Youth.

PubMed

Mitchell, Kimberly J; Jones, Lisa M; Turner, Heather A

2017-12-01

This article aims to better understand the complex role of technology in peer victimization events with recent depressive symptomatology and suicide ideation (SI). Telephone interviews were conducted with a national sample of 791 youth in the United States, aged 10 to 20 years, collected from December 2013 to March 2014. Rates of any peer harassment victimization varied by past month depressive symptomatology and SI -28% of youth with no/low depressive symptomatology reported past year peer harassment as did 43% of youth with high depressive symptomatology without SI, and 66% of youth with SI. When examining the role of technology in peer harassment, youth experiencing any mixed harassment (i.e., those incidents that occurred both in-person and through technology) were almost 4 times more likely to report past month depressive symptoms without SI (RR adj = 3.9, 95% confidence interval [CI] = [1.5, 10.0], p ≤ .01) and 7.5 times (95% CI = [1.9, 28.9], p ≤ .01) more likely to report past month SI compared with youth who had no past year peer harassment. Given the multilayered relationships among these variables, schools, medical, and mental health professionals might screen youth who are involved in higher risk peer victimization situations, for depressive symptoms and SI to improve their access to appropriate mental health services.

The political ecology of disaster: an analysis of factors influencing U.S. tornado fatalities and injuries, 1998-2000.

PubMed

Donner, William R

2007-08-01

This study examines casualties from tornadoes in the United States between the years 1998 and 2000. A political model of human ecology (POET) was used to explore how the environment, technology, and social inequality influence rates of fatalities and injuries in two models. Data were drawn from four sources: John Hart's Severe Plot v2.0, National Weather Service (NWS) Warning Verification data, Storm Prediction Center (SPC) watch data, and tract-level census data. Negative binomial regression was used to analyze the causes of tornado fatalities and injuries. Independent variables (following POET) are classified in the following manner: population, organization, environment, and technology. Rural population, population density, and household size correspond to population; racial minorities and deprivation represent social organization; tornado area represents environment; and tornado watches and warnings, as well as mobile homes, correspond to technology. Findings suggest a strong relationship between the size of a tornado path and both fatalities and injuries, whereas other measures related to technology, population, and organization produce significant yet mixed results. Census tracts having larger populations of rural residents was, of the nonenvironmental factors, the most conclusive regarding its effects across the two models. The outcomes of analysis, although not entirely supportive of the model presented in this study, suggest to some degree that demographic and social factors play a role in vulnerability to tornadoes.

Farm income and production impacts of using GM crop technology 1996–2015

PubMed Central

Brookes, Graham

2017-01-01

ABSTRACT This paper provides an assessment of the value of using genetically modified (GM) crop technology in agriculture at the farm level. It follows and updates earlier annual studies which examined impacts on yields, key variable costs of production, direct farm (gross) income and impacts on the production base of the 4 main crops of soybeans, corn, cotton and canola. The commercialisation of GM crops has occurred at a rapid rate since the mid 1990s, with important changes in both the overall level of adoption and impact occurring in 2015. This annual updated analysis shows that there continues to be very significant net economic benefits at the farm level amounting to $15.4 billion in 2015 and $167.8 billion for the 20 year period 1996–2015 (in nominal terms). These gains have been divided 49% to farmers in developed countries and 51% to farmers in developing countries. About 72% of the gains have derived from yield and production gains with the remaining 28% coming from cost savings. The technology has also made important contributions to increasing global production levels of the 4 main crops, having, for example, added 180 million tonnes and 358 million tonnes respectively, to the global production of soybeans and maize since the introduction of the technology in the mid 1990s. PMID:28481684

The Impacts of Demographic Variables on Technological and Contextual Challenges of E-learning Implementation

NASA Astrophysics Data System (ADS)

Aldowah, Hanan; Ghazal, Samar; Naufal Umar, Irfan; Muniandy, Balakrishnan

2017-09-01

Information technology has achieved robust growth which has made it possible for learning to occur quickly. The rapid development of information, communication and technologies (ICT) has initiated an unparalleled transformation in universities all over the world. This development of technology and learning is offering new techniques to represent knowledge, new practices, and new global communities of learners. As a result, today’s economic and social changes force universities to try to find new learning approaches and systems. E-learning seems to be an appropriate approach in this aspect. However, the implementation of e-learning systems in universities is not an easy task because of some challenges related to context, technology, and other challenges. This paper studied the impacts of demographic data and reported the critical points for the decision makers to consider when planning and implementing e-learning in universities. A quantitative approach was used to study the effects of technological and contextual challenges on e-learning implementation in which a questionnaire was used for the data collection. According to the findings of the study, the most important challenges of the implementation of e-learning are related either to organizational (Contextual) and technological (technical) issues. The demographic variables have been found to play a direct and indirect role with the technological and contextual challenges of implementing e-learning. This paper showed that there are some significant differences in the two challenges faced by instructors in terms of the demographic variables. The result revealed that some significant differences exist between demographic variables and the two challenges of e-learning in terms of gender, age, teaching experience, ICT experience and e-learning experience. However, there is no significant difference in terms of e-learning experience. The obtained data, from such study, can provide information about what academic institutions can do before implementing e-learning to reduce and overcome the challenges in implementing e-learning in universities. So, university administrators interested in implementing e-learning should recognize the challenges that their instructors are facing and to provide the necessary policy and support to help overcome these challenges.

Spray outputs from a variable-rate sprayer manipulated with PWM solenoid valves

USDA-ARS?s Scientific Manuscript database

Pressure fluctuations during variable-rate spray applications can affect nozzle flow rate fluctuations, resulting in spray outputs that do not coincide with the prescribed canopy structure volume. Variations in total flow rate discharged from 40 nozzles, each coupled with a pulse-width-modulated (PW...

Variability Selected Low-Luminosity Active Galactic Nuclei in the 4 Ms Chandra Deep Field-South

NASA Technical Reports Server (NTRS)

Young, M.; Brandt, W. N.; Xue, Y. Q.; Paolillo, D. M.; Alexander, F. E.; Bauer, F. E.; Lehmer, B. D.; Luo, B.; Shemmer, O.; Schneider, D. P.;

[Changes in heart rate variability after myocardial infarction. Value of Poincareé's diagram].

PubMed

Copie, X; Le Heuzey, J Y; Iliou, M C; Pousset, F; Lavergne, T; Guize, L

1995-11-01

The variability of the heart rate is reduced after myocardial infarction. It then progressively increases, to return to near normal values after several months. However, these changes in heart rate variability occur at the same time as slowing of the heart rate which makes interpretation difficult. Poincaré's diagram is constructed from a Holter recording plotting each RR interval against the preceding RR interval. The authors have developed a geometric approach to this diagram to evaluate parasympathetic tone for a given heart rate. By measuring the dispersion in height of the Poincaré's diagram, the authors evaluate the shor-term variability for a given RR interval. Two 24 hr Holter recordings were performed in 52 patients at one and two weeks after a myocardial infarction. The dispersion in the height of the Poincaré's diagrams was measured at the 10th, 25th, 50th, 75th and 90th percentiles of the total dispersion. The authors have shown an increase in the short-term variability of the shortest RR intervals (1th, 25th and 50th percentiles) which is not observed in the longer RR intervals (75th and 90th percentiles). In conclusion, theres is an increase in the heart rate variability at the shortest RR intervals. This suggests that the recovery of parasympathic tone after myocardial infarction occurs mainly at the fastest heart rates.

Climate-driven vital rates do not always mean climate-driven population.

PubMed

Tavecchia, Giacomo; Tenan, Simone; Pradel, Roger; Igual, José-Manuel; Genovart, Meritxell; Oro, Daniel

2016-12-01

Current climatic changes have increased the need to forecast population responses to climate variability. A common approach to address this question is through models that project current population state using the functional relationship between demographic rates and climatic variables. We argue that this approach can lead to erroneous conclusions when interpopulation dispersal is not considered. We found that immigration can release the population from climate-driven trajectories even when local vital rates are climate dependent. We illustrated this using individual-based data on a trans-equatorial migratory seabird, the Scopoli's shearwater Calonectris diomedea, in which the variation of vital rates has been associated with large-scale climatic indices. We compared the population annual growth rate λ i , estimated using local climate-driven parameters with ρ i , a population growth rate directly estimated from individual information and that accounts for immigration. While λ i varied as a function of climatic variables, reflecting the climate-dependent parameters, ρ i did not, indicating that dispersal decouples the relationship between population growth and climate variables from that between climatic variables and vital rates. Our results suggest caution when assessing demographic effects of climatic variability especially in open populations for very mobile organisms such as fish, marine mammals, bats, or birds. When a population model cannot be validated or it is not detailed enough, ignoring immigration might lead to misleading climate-driven projections. © 2016 John Wiley & Sons Ltd.

Students' Ways of Thinking about Two-Variable Functions and Rate of Change in Space

ERIC Educational Resources Information Center

Weber, Eric David

2012-01-01

This dissertation describes an investigation of four students' ways of thinking about functions of two variables and rate of change of those two-variable functions. Most secondary, introductory algebra, pre-calculus, and first and second semester calculus courses do not require students to think about functions of more than one variable. Yet…

Perceived Convenience in an Extended Technology Acceptance Model: Mobile Technology and English Learning for College Students

ERIC Educational Resources Information Center

Chang, Chi-Cheng; Yan, Chi-Fang; Tseng, Ju-Shih

2012-01-01

Since convenience is one of the features for mobile learning, does it affect attitude and intention of using mobile technology? The technology acceptance model (TAM), proposed by David (1989), was extended with perceived convenience in the present study. With regard to English language mobile learning, the variables in the extended TAM and its…

Adding HRV biofeedback to psychotherapy increases heart rate variability and improves the treatment of major depressive disorder.

PubMed

Caldwell, Yoko Tsui; Steffen, Patrick R

2018-01-05

Heart rate variability (HRV) is a significant marker of health outcomes with decreased HRV predicting increased disease risk. HRV is decreased in major depressive disorder (MDD) but existing treatments for depression do not return heart rate variability to normal levels even with successful treatment of depression. Heart rate variability biofeedback (HRVB) increases heart rate variability but no studies to date have examined whether combining HRVB with psychotherapy improves outcome in MDD treatment. The present study used a randomized controlled design to compare the effects of HRVB combined with psychotherapy on MDD relative to a psychotherapy treatment as usual group and to a non-depressed control group. The HRVB+psychotherapy group showed a larger increase in HRV and a larger decrease in depressive symptoms relative to the other groups over a six-week period, whereas the psychotherapy group only did not improve HRV. Results support the supplementation of psychotherapy with HRVB in the treatment of MDD. Copyright © 2018 Elsevier B.V. All rights reserved.

Effects of work stress on work-related rumination, restful sleep, and nocturnal heart rate variability experienced on workdays and weekends.

PubMed

Vahle-Hinz, Tim; Bamberg, Eva; Dettmers, Jan; Friedrich, Niklas; Keller, Monika

2014-04-01

The present study reports the lagged effects of work stress on work-related rumination, restful sleep, and nocturnal heart rate variability experienced during both workdays and weekends. Fifty employees participated in a diary study. Multilevel and regression analyses revealed a significant relationship between work stress measured at the end of a workday, work-related rumination measured during the evening, and restful sleep measured the following morning. Work stress, measured as the mean of 2 consecutive workdays, was substantially but not significantly related to restful sleep on weekends. Work stress was unrelated to nocturnal heart rate variability. Work-related rumination was related to restful sleep on weekends but not on workdays. Additionally, work-related rumination on weekends was positively related to nocturnal heart rate variability during the night between Saturday and Sunday. No mediation effects of work stress on restful sleep or nocturnal heart rate variability via work-related rumination were confirmed.

Effect of pedal rate and power output on rating of perceived exertion during cycle ergometry exercise.

PubMed

Hamer, Mark; Boutcher, Yati N; Boutcher, Stephen H

2005-12-01

This study examined differentiated rating of perceived exertion (RPE), heart rate, and heart-rate variability during light cycle ergometry exercise at two different pedal rates. 30 healthy men (22.6 +/- 0.9 yr.) were recruited from a student population and completed a continuous 20-min. cycle ergometry exercise protocol, consisting of a 4-min. warm-up (60 rev./min., 30 Watts), followed by four bouts of 4 min. at different combinations of pedal rate (40 or 80 rev./min.) and power output (40 or 80 Watts). The order of the four combinations was counterbalanced across participants. Heart rate was measured using a polar heart-rate monitor, and parasympathetic balance was assessed through time series analysis of heart-rate variability. Measures were compared using a 2 (pedal rate) x 2 (power output) repeated-measures analysis of variance. RPE was significantly greater (p<.05) at 80 versus 40 rev./min. at 40 W. For both power outputs heart rate was significantly increased, and the high frequency component of heart-rate variability was significantly reduced at 80 compared with 40 rev./min. These findings indicate the RPE was greater at higher than at lower pedalling rates for a light absolute power output which contrasts with previous findings based on use of higher power output. Also, pedal rate had a significant effect on heart rate and heart-rate variability at constant power output.

A hazard rate analysis of fertility using duration data from Malaysia.

PubMed

Chang, C

1988-01-01

Data from the Malaysia Fertility and Family Planning Survey (MFLS) of 1974 were used to investigate the effects of biological and socioeconomic variables on fertility based on the hazard rate model. Another study objective was to investigate the robustness of the findings of Trussell et al. (1985) by comparing the findings of this study with theirs. The hazard rate of conception for the jth fecundable spell of the ith woman, hij, is determined by duration dependence, tij, measured by the waiting time to conception; unmeasured heterogeneity (HETi; the time-invariant variables, Yi (race, cohort, education, age at marriage); and time-varying variables, Xij (age, parity, opportunity cost, income, child mortality, child sex composition). In this study, all the time-varying variables were constant over a spell. An asymptotic X2 test for the equality of constant hazard rates across birth orders, allowing time-invariant variables and heterogeneity, showed the importance of time-varying variables and duration dependence. Under the assumption of fixed effects heterogeneity and the Weibull distribution for the duration of waiting time to conception, the empirical results revealed a negative parity effect, a negative impact from male children, and a positive effect from child mortality on the hazard rate of conception. The estimates of step functions for the hazard rate of conception showed parity-dependent fertility control, evidence of heterogeneity, and the possibility of nonmonotonic duration dependence. In a hazard rate model with piecewise-linear-segment duration dependence, the socioeconomic variables such as cohort, child mortality, income, and race had significant effects, after controlling for the length of the preceding birth. The duration dependence was consistant with the common finding, i.e., first increasing and then decreasing at a slow rate. The effects of education and opportunity cost on fertility were insignificant.

Non-Constant Learning Rates in Retrospective Experience Curve Analyses and their Correlation to Deployment Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wei, Max; Smith, Sarah J.; Sohn, Michael D.

2015-07-16

A key challenge for policy-makers and technology market forecasters is to estimate future technology costs and in particular the rate of cost reduction versus production volume. A related, critical question is what role should state and federal governments have in advancing energy efficient and renewable energy technologies? This work provides retrospective experience curves and learning rates for several energy-related technologies, each of which have a known history of federal and state deployment programs. We derive learning rates for eight technologies including energy efficient lighting technologies, stationary fuel cell systems, and residential solar photovoltaics, and provide an overview and timeline ofmore » historical deployment programs such as state and federal standards and state and national incentive programs for each technology. Piecewise linear regimes are observed in a range of technology experience curves, and public investments or deployment programs are found to be strongly correlated to an increase in learning rate across multiple technologies. A downward bend in the experience curve is found in 5 out of the 8 energy-related technologies presented here (electronic ballasts, magnetic ballasts, compact fluorescent lighting, general service fluorescent lighting, and the installed cost of solar PV). In each of the five downward-bending experience curves, we believe that an increase in the learning rate can be linked to deployment programs to some degree. This work sheds light on the endogenous versus exogenous contributions to technological innovation and highlights the impact of exogenous government sponsored deployment programs. This work can inform future policy investment direction and can shed light on market transformation and technology learning behavior.« less

Effects of '"Environmental Chemistry" Elective Course via Technology-Embedded Scientific Inquiry Model on Some Variables

ERIC Educational Resources Information Center

Çalik, Muammer; Özsevgeç, Tuncay; Ebenezer, Jazlin; Artun, Hüseyin; Küçük, Zeynel

2014-01-01

The purpose of this study is to examine the effects of "environmental chemistry" elective course via Technology-Embedded Scientific Inquiry (TESI) model on senior science student teachers' (SSSTs) conceptions of environmental chemistry concepts/issues, attitudes toward chemistry, and technological pedagogical content knowledge…

Our Brains Extended

ERIC Educational Resources Information Center

Prensky, Marc

2013-01-01

Technology is an extension of the brain; it is a new way of thinking. It is the solution humans have created to deal with the difficult new context of variability, uncertainty, complexity, and ambiguity. Wise integration of evolving and powerful technology demands a rethinking of the curriculum. This article discusses technology as the new way of…

Continuous Monitoring of CH4 Emissions from Marcellus Shale Gas Extraction in South West Pennsylvania Using Top Down Methodology

NASA Astrophysics Data System (ADS)

Sarmiento, D. P.; Belmecheri, S.; Lauvaux, T.; Sowers, T. A.; Bryant, S.; Miles, N. L.; Richardson, S.; Aikins, J.; Sweeney, C.; Petron, G.; Davis, K. J.

2012-12-01

Natural gas extraction from shale formations via hydraulic-fracturing (fracking) is expanding rapidly in several regions of North America. In Pennsylvania, the number of wells drilled to extract natural gas from the Marcellus shale has grown from 195 in 2008 to 1,386 in 2010. The gas extraction process using the fracking technology results in the escape of methane (CH4), a potent greenhouse gas and the principal component of natural gas, into the atmosphere. Emissions of methane from fracking operations remain poorly quantified, leading to a large range of scenarios for the contribution of fracking to climate change. A mobile measurement campaign provided insights on methane leakage rates and an improved understanding of the spatio-temporal variability in active drilling areas in the South West of Pennsylvania. Two towers were then instrumented to monitor fugitive emissions of methane from well pads, pipelines, and other infrastructures in the area. The towers, one within a drilling region and one upwind of active drilling, measured atmospheric CH4 mixing ratios continuously. Isotopic measurements from air flasks were also collected. Data from the initial mobile campaign were used to estimate emission rates from single sites such as wells and compressor stations. Tower data will be used to construct a simple atmospheric inversion for regional methane emissions. Our results show the daily variability in emissions and allow us to estimate leakage rates over a one month period in South West Pennsylvania. We discuss potential deployment strategies in drilling zones to monitor emissions of methane over longer periods of time.

Combining Sustainable Land Management Technologies to Combat Land Degradation and Improve Rural Livelihoods in Semi-arid Lands in Kenya

NASA Astrophysics Data System (ADS)

Mganga, K. Z.; Musimba, N. K. R.; Nyariki, D. M.

2015-12-01

Drylands occupy more than 80 % of Kenya's total land mass and contribute immensely to the national economy and society through agriculture, livestock production, tourism, and wild product harvesting. Dryland ecosystems are areas of high climate variability making them vulnerable to the threats of land degradation. Consequently, agropastoralists inhabiting these ecosystems develop mechanisms and technologies to cope with the impacts of climate variability. This study is aimed to; (1) determine what agropastoralists inhabiting a semi-arid ecosystem in Kenya attribute to be the causes and indicators of land degradation, (2) document sustainable land management (SLM) technologies being undertaken to combat land degradation, and (3) identify the factors that influence the choice of these SLM technologies. Vegetation change from preferred indigenous forage grass species to woody vegetation was cited as the main indicator of land degradation. Land degradation was attributed to recurrent droughts and low amounts of rainfall, overgrazing, and unsustainable harvesting of trees for fuelwood production. However, despite the challenges posed by climate variability and recurrent droughts, the local community is engaging in simple SLM technologies including grass reseeding, rainwater harvesting and soil conservation, and dryland agroforestry as a holistic approach combating land degradation and improving their rural livelihoods. The choice of these SLM technologies was mainly driven by their additional benefits to combating land degradation. In conclusion, promoting such simple SLM technologies can help reverse the land degradation trend, improve agricultural production, food security including access to food, and subsequently improve livelihoods of communities inhabiting dryland ecosystems.

Combining Sustainable Land Management Technologies to Combat Land Degradation and Improve Rural Livelihoods in Semi-arid Lands in Kenya.

PubMed

Mganga, K Z; Musimba, N K R; Nyariki, D M

2015-12-01

Drylands occupy more than 80% of Kenya's total land mass and contribute immensely to the national economy and society through agriculture, livestock production, tourism, and wild product harvesting. Dryland ecosystems are areas of high climate variability making them vulnerable to the threats of land degradation. Consequently, agropastoralists inhabiting these ecosystems develop mechanisms and technologies to cope with the impacts of climate variability. This study is aimed to; (1) determine what agropastoralists inhabiting a semi-arid ecosystem in Kenya attribute to be the causes and indicators of land degradation, (2) document sustainable land management (SLM) technologies being undertaken to combat land degradation, and (3) identify the factors that influence the choice of these SLM technologies. Vegetation change from preferred indigenous forage grass species to woody vegetation was cited as the main indicator of land degradation. Land degradation was attributed to recurrent droughts and low amounts of rainfall, overgrazing, and unsustainable harvesting of trees for fuelwood production. However, despite the challenges posed by climate variability and recurrent droughts, the local community is engaging in simple SLM technologies including grass reseeding, rainwater harvesting and soil conservation, and dryland agroforestry as a holistic approach combating land degradation and improving their rural livelihoods. The choice of these SLM technologies was mainly driven by their additional benefits to combating land degradation. In conclusion, promoting such simple SLM technologies can help reverse the land degradation trend, improve agricultural production, food security including access to food, and subsequently improve livelihoods of communities inhabiting dryland ecosystems.

Prospects for a prolonged slowdown in global warming in the early 21st century

PubMed Central

Knutson, Thomas R.; Zhang, Rong; Horowitz, Larry W.

2016-01-01

Global mean temperature over 1998 to 2015 increased at a slower rate (0.1 K decade−1) compared with the ensemble mean (forced) warming rate projected by Coupled Model Intercomparison Project 5 (CMIP5) models (0.2 K decade−1). Here we investigate the prospects for this slower rate to persist for a decade or more. The slower rate could persist if the transient climate response is overestimated by CMIP5 models by a factor of two, as suggested by recent low-end estimates. Alternatively, using CMIP5 models' warming rate, the slower rate could still persist due to strong multidecadal internal variability cooling. Combining the CMIP5 ensemble warming rate with internal variability episodes from a single climate model—having the strongest multidecadal variability among CMIP5 models—we estimate that the warming slowdown (<0.1 K decade−1 trend beginning in 1998) could persist, due to internal variability cooling, through 2020, 2025 or 2030 with probabilities 16%, 11% and 6%, respectively. PMID:27901045

[Design of hand-held heart rate variability acquisition and analysis system].

PubMed

Li, Kaiyuan; Wang, Buqing; Wang, Weidong

2012-07-01

A design of handheld heart rate variability acquisition and analysis system is proposed. The system collects and stores the patient's ECG every five minutes through both hands touching on the electrodes, and then -uploads data to a PC through USB port. The system uses software written in LabVIEW to analyze heart rate variability parameters, The parameters calculated function is programmed and generated to components in Matlab.

The influence of betamethasone on fetal heart rate variability, obtained by non-invasive fetal electrocardiogram recordings.

PubMed

Verdurmen, Kim M J; Warmerdam, Guy J J; Lempersz, Carlijn; Hulsenboom, Alexandra D J; Renckens, Joris; Dieleman, Jeanne P; Vullings, Rik; van Laar, Judith O E H; Oei, S Guid

2018-04-01

Betamethasone is widely used to enhance fetal lung maturation in case of threatened preterm labour. Fetal heart rate variability is one of the most important parameters to assess in fetal monitoring, since it is a reliable indicator for fetal distress. To describe the effect of betamethasone on fetal heart rate variability, by applying spectral analysis on non-invasive fetal electrocardiogram recordings. Prospective cohort study. Patients that require betamethasone, with a gestational age from 24 weeks onwards. Fetal heart rate variability parameters on day 1, 2, and 3 after betamethasone administration are compared to a reference measurement. Following 68 inclusions, 12 patients remained with complete series of measurements and sufficient data quality. During day 1, an increase in absolute fetal heart rate variability values was seen. During day 2, a decrease in these values was seen. All trends indicate to return to pre-medication values on day 3. Normalised high- and low-frequency power show little changes during the study period. The changes in fetal heart rate variability following betamethasone administration show the same pattern when calculated by spectral analysis of the fetal electrocardiogram, as when calculated by cardiotocography. Since normalised spectral values show little changes, the influence of autonomic modulation seems minor. Copyright © 2018 Elsevier B.V. All rights reserved.