WASP (Write a Scientific Paper) using Excel 9: Analysis of variance.

PubMed

Grech, Victor

2018-06-01

Analysis of variance (ANOVA) may be required by researchers as an inferential statistical test when more than two means require comparison. This paper explains how to perform ANOVA in Microsoft Excel. Copyright © 2018 Elsevier B.V. All rights reserved.

Comparing the Performance of Approaches for Testing the Homogeneity of Variance Assumption in One-Factor ANOVA Models

ERIC Educational Resources Information Center

Wang, Yan; Rodríguez de Gil, Patricia; Chen, Yi-Hsin; Kromrey, Jeffrey D.; Kim, Eun Sook; Pham, Thanh; Nguyen, Diep; Romano, Jeanine L.

2017-01-01

Various tests to check the homogeneity of variance assumption have been proposed in the literature, yet there is no consensus as to their robustness when the assumption of normality does not hold. This simulation study evaluated the performance of 14 tests for the homogeneity of variance assumption in one-way ANOVA models in terms of Type I error…

SMAR Sessions

NASA Technical Reports Server (NTRS)

Ploutz-Snyder, Robert

2011-01-01

This slide presentation is a series of educational presentations that are on the statistical function of analysis of variance (ANOVA). Analysis of Variance (ANOVA) examines variability between groups, relative to within groups, to determine whether there's evidence that the groups are not from the same population. One other presentation reviews hypothesis testing.

Technical note: Application of the Box-Cox data transformation to animal science experiments.

PubMed

Peltier, M R; Wilcox, C J; Sharp, D C

1998-03-01

In the use of ANOVA for hypothesis testing in animal science experiments, the assumption of homogeneity of errors often is violated because of scale effects and the nature of the measurements. We demonstrate a method for transforming data so that the assumptions of ANOVA are met (or violated to a lesser degree) and apply it in analysis of data from a physiology experiment. Our study examined whether melatonin implantation would affect progesterone secretion in cycling pony mares. Overall treatment variances were greater in the melatonin-treated group, and several common transformation procedures failed. Application of the Box-Cox transformation algorithm reduced the heterogeneity of error and permitted the assumption of equal variance to be met.

Estimation of the KR20 Reliability Coefficient When Data Are Incomplete.

ERIC Educational Resources Information Center

Huynh, Huynh

Three techniques for estimating Kuder Richardson reliability (KR20) coefficients for incomplete data are contrasted. The methods are: (1) Henderson's Method 1 (analysis of variance, or ANOVA); (2) Henderson's Method 3 (FITCO); and (3) Koch's method of symmetric sums (SYSUM). A Monte Carlo simulation was used to assess the precision of the three…

ANOVA with Rasch Measures.

ERIC Educational Resources Information Center

Linacre, John Michael

Various methods of estimating main effects from ordinal data are presented and contrasted. Problems discussed include: (1) at what level to accumulate ordinal data into linear measures; (2) how to maintain scaling across analyses; and (3) the inevitable confounding of within cell variance with measurement error. An example shows three methods of…

A Demonstration of the Analysis of Variance Using Physical Movement and Space

ERIC Educational Resources Information Center

Owen, William J.; Siakaluk, Paul D.

2011-01-01

Classroom demonstrations help students better understand challenging concepts. This article introduces an activity that demonstrates the basic concepts involved in analysis of variance (ANOVA). Students who physically participated in the activity had a better understanding of ANOVA concepts (i.e., higher scores on an exam question answered 2…

Inquiring the Most Critical Teacher's Technology Education Competences in the Highest Efficient Technology Education Learning Organization

ERIC Educational Resources Information Center

Yung-Kuan, Chan; Hsieh, Ming-Yuan; Lee, Chin-Feng; Huang, Chih-Cheng; Ho, Li-Chih

2017-01-01

Under the hyper-dynamic education situation, this research, in order to comprehensively explore the interplays between Teacher Competence Demands (TCD) and Learning Organization Requests (LOR), cross-employs the data refined method of Descriptive Statistics (DS) method and Analysis of Variance (ANOVA) and Principal Components Analysis (PCA)…

The Impact of Bullying and Victimization on Students' Relationships

ERIC Educational Resources Information Center

Demanet, Jannick; Van Houtte, Mieke

2012-01-01

Grschool, in Flemish secondary schools. Methods: We use data from the Flemish Educational Assessment (FlEA), consisting of 11,872 students in 85 schools. Multivariate analyses of variance (ANOVA) were performed. Results: Non-involved students felt most attached to peers, parents, teachers, and school. Bullies matched the level of parental…

Interpreting Regression Results: beta Weights and Structure Coefficients are Both Important.

ERIC Educational Resources Information Center

Thompson, Bruce

Various realizations have led to less frequent use of the "OVA" methods (analysis of variance--ANOVA--among others) and to more frequent use of general linear model approaches such as regression. However, too few researchers understand all the various coefficients produced in regression. This paper explains these coefficients and their…

Multivariate analysis of variance of designed chromatographic data. A case study involving fermentation of rooibos tea.

PubMed

Marini, Federico; de Beer, Dalene; Walters, Nico A; de Villiers, André; Joubert, Elizabeth; Walczak, Beata

2017-03-17

An ultimate goal of investigations of rooibos plant material subjected to different stages of fermentation is to identify the chemical changes taking place in the phenolic composition, using an untargeted approach and chromatographic fingerprints. Realization of this goal requires, among others, identification of the main components of the plant material involved in chemical reactions during the fermentation process. Quantitative chromatographic data for the compounds for extracts of green, semi-fermented and fermented rooibos form the basis of preliminary study following a targeted approach. The aim is to estimate whether treatment has a significant effect based on all quantified compounds and to identify the compounds, which contribute significantly to it. Analysis of variance is performed using modern multivariate methods such as ANOVA-Simultaneous Component Analysis, ANOVA - Target Projection and regularized MANOVA. This study is the first one in which all three approaches are compared and evaluated. For the data studied, all tree methods reveal the same significance of the fermentation effect on the extract compositions, but they lead to its different interpretation. Copyright © 2017 Elsevier B.V. All rights reserved.

The use of analysis of variance procedures in biological studies

USGS Publications Warehouse

Williams, B.K.

1987-01-01

The analysis of variance (ANOVA) is widely used in biological studies, yet there remains considerable confusion among researchers about the interpretation of hypotheses being tested. Ambiguities arise when statistical designs are unbalanced, and in particular when not all combinations of design factors are represented in the data. This paper clarifies the relationship among hypothesis testing, statistical modelling and computing procedures in ANOVA for unbalanced data. A simple two-factor fixed effects design is used to illustrate three common parametrizations for ANOVA models, and some associations among these parametrizations are developed. Biologically meaningful hypotheses for main effects and interactions are given in terms of each parametrization, and procedures for testing the hypotheses are described. The standard statistical computing procedures in ANOVA are given along with their corresponding hypotheses. Throughout the development unbalanced designs are assumed and attention is given to problems that arise with missing cells.

Role of Adenosine Receptor A2A in Traumatic Optic Neuropathies (Addendum)

DTIC Science & Technology

2016-03-01

inflammation was evaluated using Western blot, Real-Time PCR and immuno-staining analyses. Role of A2AAR signaling in the anti-inflammation effect of ABT...Neuroimmunology 277 (2014) 96–104were evaluated by analysis of variance (one-way ANOVA), and the significance of differences between groups was assessed by the...Ahmad et al. / Journal of Neuroimmunology 277 (2014) 96–104were evaluated by analysis of variance (one-way ANOVA), and the significance of differences

Generalizability Assessment of Autocorrelated Direct Observation Data: The Applicability of the Tiao-Tan Method and Alternative.

ERIC Educational Resources Information Center

Suen, Hoi K.; And Others

The applicability is explored of the Bayesian random-effect analysis of variance (ANOVA) model developed by G. C. Tiao and W. Y. Tan (1966) and a method suggested by H. K. Suen and P. S. Lee (1987) for the generalizability analysis of autocorrelated data. According to Tiao and Tan, if time series data could be described as a first-order…

Multiple Regression as a Flexible Alternative to ANOVA in L2 Research

ERIC Educational Resources Information Center

Plonsky, Luke; Oswald, Frederick L.

2017-01-01

Second language (L2) research relies heavily and increasingly on ANOVA (analysis of variance)-based results as a means to advance theory and practice. This fact alone should merit some reflection on the utility and value of ANOVA. It is possible that we could use this procedure more appropriately and, as argued here, other analyses such as…

Determining Sample Sizes for Precise Contrast Analysis with Heterogeneous Variances

ERIC Educational Resources Information Center

Jan, Show-Li; Shieh, Gwowen

2014-01-01

The analysis of variance (ANOVA) is one of the most frequently used statistical analyses in practical applications. Accordingly, the single and multiple comparison procedures are frequently applied to assess the differences among mean effects. However, the underlying assumption of homogeneous variances may not always be tenable. This study…

Smoothing spline ANOVA frailty model for recurrent event data.

PubMed

Du, Pang; Jiang, Yihua; Wang, Yuedong

2011-12-01

Gap time hazard estimation is of particular interest in recurrent event data. This article proposes a fully nonparametric approach for estimating the gap time hazard. Smoothing spline analysis of variance (ANOVA) decompositions are used to model the log gap time hazard as a joint function of gap time and covariates, and general frailty is introduced to account for between-subject heterogeneity and within-subject correlation. We estimate the nonparametric gap time hazard function and parameters in the frailty distribution using a combination of the Newton-Raphson procedure, the stochastic approximation algorithm (SAA), and the Markov chain Monte Carlo (MCMC) method. The convergence of the algorithm is guaranteed by decreasing the step size of parameter update and/or increasing the MCMC sample size along iterations. Model selection procedure is also developed to identify negligible components in a functional ANOVA decomposition of the log gap time hazard. We evaluate the proposed methods with simulation studies and illustrate its use through the analysis of bladder tumor data. © 2011, The International Biometric Society.

Measurement Consistency from Magnetic Resonance Images

PubMed Central

Chung, Dongjun; Chung, Moo K.; Durtschi, Reid B.; Lindell, R. Gentry; Vorperian, Houri K.

2010-01-01

Rationale and Objectives In quantifying medical images, length-based measurements are still obtained manually. Due to possible human error, a measurement protocol is required to guarantee the consistency of measurements. In this paper, we review various statistical techniques that can be used in determining measurement consistency. The focus is on detecting a possible measurement bias and determining the robustness of the procedures to outliers. Materials and Methods We review correlation analysis, linear regression, Bland-Altman method, paired t-test, and analysis of variance (ANOVA). These techniques were applied to measurements, obtained by two raters, of head and neck structures from magnetic resonance images (MRI). Results The correlation analysis and the linear regression were shown to be insufficient for detecting measurement inconsistency. They are also very sensitive to outliers. The widely used Bland-Altman method is a visualization technique so it lacks the numerical quantification. The paired t-test tends to be sensitive to small measurement bias. On the other hand, ANOVA performs well even under small measurement bias. Conclusion In almost all cases, using only one method is insufficient and it is recommended to use several methods simultaneously. In general, ANOVA performs the best. PMID:18790405

Analysis of Variance in Statistical Image Processing

NASA Astrophysics Data System (ADS)

Kurz, Ludwik; Hafed Benteftifa, M.

1997-04-01

A key problem in practical image processing is the detection of specific features in a noisy image. Analysis of variance (ANOVA) techniques can be very effective in such situations, and this book gives a detailed account of the use of ANOVA in statistical image processing. The book begins by describing the statistical representation of images in the various ANOVA models. The authors present a number of computationally efficient algorithms and techniques to deal with such problems as line, edge, and object detection, as well as image restoration and enhancement. By describing the basic principles of these techniques, and showing their use in specific situations, the book will facilitate the design of new algorithms for particular applications. It will be of great interest to graduate students and engineers in the field of image processing and pattern recognition.

Effects of Stress and Social Enrichment on Alcohol Intake, Biological and Psychological Stress Responses in Rats

DTIC Science & Technology

2010-06-28

Variance (ANOVA) Table for Serum Corticosterone Table 15 – Repeated-Measures ANOVA Table for Body Weight, Within-Subject Effects Table 16...Serum Ethanol Concentration Table 21 – Repeated-Measures ANOVA Table for Rotarod Performance, Within- Subject Effects Table 22 – Repeated...and that this social environment seems to attenuate the effects of predator and unpredictable stressors on serum corticosterone . In summary, stressed

Smoothing Spline ANOVA Decomposition of Arbitrary Splines: An Application to Eye Movements in Reading

PubMed Central

Matuschek, Hannes; Kliegl, Reinhold; Holschneider, Matthias

2015-01-01

The Smoothing Spline ANOVA (SS-ANOVA) requires a specialized construction of basis and penalty terms in order to incorporate prior knowledge about the data to be fitted. Typically, one resorts to the most general approach using tensor product splines. This implies severe constraints on the correlation structure, i.e. the assumption of isotropy of smoothness can not be incorporated in general. This may increase the variance of the spline fit, especially if only a relatively small set of observations are given. In this article, we propose an alternative method that allows to incorporate prior knowledge without the need to construct specialized bases and penalties, allowing the researcher to choose the spline basis and penalty according to the prior knowledge of the observations rather than choosing them according to the analysis to be done. The two approaches are compared with an artificial example and with analyses of fixation durations during reading. PMID:25816246

The Peter Effect in Early Experimental Education Research.

ERIC Educational Resources Information Center

Little, Joseph

2003-01-01

Traces the ways in which educational researchers referred to Ronald A. Fisher's analysis of variance (ANOVA) between 1932 and 1944 in the "Journal of Experimental Education" (JXE). Shows how the changes in citational practices served to separate the ANOVA from its affiliation with Fisher, essentially effacing the memory of its human…

Inhibition of Orthopaedic Implant Infections by Immunomodulatory Effects of Host Defense Peptides

DTIC Science & Technology

2014-12-01

significance was determined by t- tests or by one-way analysis of variance (ANOVA) followed by Bonferroni post hoc tests in experiments with multiple...groups. Non- parametric Mann-Whitney tests , Kruskal-Wallis ANOVA followed by Newman-Kuels post hoc tests , or van Elteren’s two-way tests were applied to...in D, and black symbols in A), statistical analysis was by one-way ANOVA followed by Bonferroni versus control, post hoc tests . Otherwise, statistical

Cautionary Note on Reporting Eta-Squared Values from Multifactor ANOVA Designs

ERIC Educational Resources Information Center

Pierce, Charles A.; Block, Richard A.; Aguinis, Herman

2004-01-01

The authors provide a cautionary note on reporting accurate eta-squared values from multifactor analysis of variance (ANOVA) designs. They reinforce the distinction between classical and partial eta-squared as measures of strength of association. They provide examples from articles published in premier psychology journals in which the authors…

Should a First Course in ANOVA Be Taught Through MLR?

ERIC Educational Resources Information Center

Williams, John D.

Before implementing a course in the analysis of variance (ANOVA) taught through multiple linear regression, several concerns must be addressed. Adequate computer facilities that are available to students on a low-cost or cost-free basis are necessary; also students must be able to meaningfully communicate with their major advisor regarding their…

Planned Comparisons as Better Alternatives to ANOVA Omnibus Tests.

ERIC Educational Resources Information Center

Benton, Roberta L.

Analyses of data are presented to illustrate the advantages of using a priori or planned comparisons rather than omnibus analysis of variance (ANOVA) tests followed by post hoc or posteriori testing. The two types of planned comparisons considered are planned orthogonal non-trend coding contrasts and orthogonal polynomial or trend contrast coding.…

Use of "t"-Test and ANOVA in Career-Technical Education Research

ERIC Educational Resources Information Center

Rojewski, Jay W.; Lee, In Heok; Gemici, Sinan

2012-01-01

Use of t-tests and analysis of variance (ANOVA) procedures in published research from three scholarly journals in career and technical education (CTE) during a recent 5-year period was examined. Information on post hoc analyses, reporting of effect size, alpha adjustments to account for multiple tests, power, and examination of assumptions…

Assessment of Adolescent Perceptions on Parental Attitudes on Different Variables

ERIC Educational Resources Information Center

Ersoy, Evren

2015-01-01

The purpose of this study is to examine secondary school student perceptions of parental attitudes with regards to specific variables. Independent samples t test for parametric distributions and one-way variance analysis (ANOVA) was used for analyzing the data, when the ANOVA analyses were significant Scheffe test was conducted on homogeneous…

Power and Sample Size Calculations for Testing Linear Combinations of Group Means under Variance Heterogeneity with Applications to Meta and Moderation Analyses

ERIC Educational Resources Information Center

Shieh, Gwowen; Jan, Show-Li

2015-01-01

The general formulation of a linear combination of population means permits a wide range of research questions to be tested within the context of ANOVA. However, it has been stressed in many research areas that the homogeneous variances assumption is frequently violated. To accommodate the heterogeneity of variance structure, the…

Eta Squared, Partial Eta Squared, and Misreporting of Effect Size in Communication Research.

ERIC Educational Resources Information Center

Levine, Timothy R.; Hullett, Craig R.

2002-01-01

Alerts communication researchers to potential errors stemming from the use of SPSS (Statistical Package for the Social Sciences) to obtain estimates of eta squared in analysis of variance (ANOVA). Strives to clarify issues concerning the development and appropriate use of eta squared and partial eta squared in ANOVA. Discusses the reporting of…

Finding P-Values for F Tests of Hypothesis on a Spreadsheet.

ERIC Educational Resources Information Center

Rochowicz, John A., Jr.

The calculation of the F statistic for a one-factor analysis of variance (ANOVA) and the construction of an ANOVA tables are easily implemented on a spreadsheet. This paper describes how to compute the p-value (observed significance level) for a particular F statistic on a spreadsheet. Decision making on a spreadsheet and applications to the…

The analysis of morphometric data on rocky mountain wolves and artic wolves using statistical method

NASA Astrophysics Data System (ADS)

Ammar Shafi, Muhammad; Saifullah Rusiman, Mohd; Hamzah, Nor Shamsidah Amir; Nor, Maria Elena; Ahmad, Noor’ani; Azia Hazida Mohamad Azmi, Nur; Latip, Muhammad Faez Ab; Hilmi Azman, Ahmad

2018-04-01

Morphometrics is a quantitative analysis depending on the shape and size of several specimens. Morphometric quantitative analyses are commonly used to analyse fossil record, shape and size of specimens and others. The aim of the study is to find the differences between rocky mountain wolves and arctic wolves based on gender. The sample utilised secondary data which included seven variables as independent variables and two dependent variables. Statistical modelling was used in the analysis such was the analysis of variance (ANOVA) and multivariate analysis of variance (MANOVA). The results showed there exist differentiating results between arctic wolves and rocky mountain wolves based on independent factors and gender.

Bias, precision and statistical power of analysis of covariance in the analysis of randomized trials with baseline imbalance: a simulation study

PubMed Central

2014-01-01

Background Analysis of variance (ANOVA), change-score analysis (CSA) and analysis of covariance (ANCOVA) respond differently to baseline imbalance in randomized controlled trials. However, no empirical studies appear to have quantified the differential bias and precision of estimates derived from these methods of analysis, and their relative statistical power, in relation to combinations of levels of key trial characteristics. This simulation study therefore examined the relative bias, precision and statistical power of these three analyses using simulated trial data. Methods 126 hypothetical trial scenarios were evaluated (126 000 datasets), each with continuous data simulated by using a combination of levels of: treatment effect; pretest-posttest correlation; direction and magnitude of baseline imbalance. The bias, precision and power of each method of analysis were calculated for each scenario. Results Compared to the unbiased estimates produced by ANCOVA, both ANOVA and CSA are subject to bias, in relation to pretest-posttest correlation and the direction of baseline imbalance. Additionally, ANOVA and CSA are less precise than ANCOVA, especially when pretest-posttest correlation ≥ 0.3. When groups are balanced at baseline, ANCOVA is at least as powerful as the other analyses. Apparently greater power of ANOVA and CSA at certain imbalances is achieved in respect of a biased treatment effect. Conclusions Across a range of correlations between pre- and post-treatment scores and at varying levels and direction of baseline imbalance, ANCOVA remains the optimum statistical method for the analysis of continuous outcomes in RCTs, in terms of bias, precision and statistical power. PMID:24712304

A LISREL Model for the Analysis of Repeated Measures with a Patterned Covariance Matrix.

ERIC Educational Resources Information Center

Rovine, Michael J.; Molenaar, Peter C. M.

1998-01-01

Presents a LISREL model for the estimation of the repeated measures analysis of variance (ANOVA) with a patterned covariance matrix. The model is demonstrated for a 5 x 2 (Time x Group) ANOVA in which the data are assumed to be serially correlated. Similarities with the Statistical Analysis System PROC MIXED model are discussed. (SLD)

Improved Test Planning and Analysis Through the Use of Advanced Statistical Methods

NASA Technical Reports Server (NTRS)

Green, Lawrence L.; Maxwell, Katherine A.; Glass, David E.; Vaughn, Wallace L.; Barger, Weston; Cook, Mylan

2016-01-01

The goal of this work is, through computational simulations, to provide statistically-based evidence to convince the testing community that a distributed testing approach is superior to a clustered testing approach for most situations. For clustered testing, numerous, repeated test points are acquired at a limited number of test conditions. For distributed testing, only one or a few test points are requested at many different conditions. The statistical techniques of Analysis of Variance (ANOVA), Design of Experiments (DOE) and Response Surface Methods (RSM) are applied to enable distributed test planning, data analysis and test augmentation. The D-Optimal class of DOE is used to plan an optimally efficient single- and multi-factor test. The resulting simulated test data are analyzed via ANOVA and a parametric model is constructed using RSM. Finally, ANOVA can be used to plan a second round of testing to augment the existing data set with new data points. The use of these techniques is demonstrated through several illustrative examples. To date, many thousands of comparisons have been performed and the results strongly support the conclusion that the distributed testing approach outperforms the clustered testing approach.

The Partitioning of Variance Habits of Correlational and Experimental Psychologists: The Two Disciplines of Scientific Psychology Revisited

ERIC Educational Resources Information Center

Krus, David J.; Krus, Patricia H.

1978-01-01

The conceptual differences between coded regression analysis and traditional analysis of variance are discussed. Also, a modification of several SPSS routines is proposed which allows for direct interpretation of ANOVA and ANCOVA results in a form stressing the strength and significance of scrutinized relationships. (Author)

Characterization of near infrared spectral variance in the authentication of skim and nonfat dry milk powder collection using ANOVA-PCA, Pooled-ANOVA, and partial least squares regression

USDA-ARS?s Scientific Manuscript database

Forty-one samples of skim milk powder (SMP) and non-fat dry milk (NFDM) from 8 suppliers, 13 production sites, and 3 processing temperatures were analyzed by NIR diffuse reflectance spectrometry over a period of three days. NIR reflectance spectra (1700-2500 nm) were converted to pseudo-absorbance ...

A Probabilistic Collocation Based Iterative Kalman Filter for Landfill Data Assimilation

NASA Astrophysics Data System (ADS)

Qiang, Z.; Zeng, L.; Wu, L.

2016-12-01

Due to the strong spatial heterogeneity of landfill, uncertainty is ubiquitous in gas transport process in landfill. To accurately characterize the landfill properties, the ensemble Kalman filter (EnKF) has been employed to assimilate the measurements, e.g., the gas pressure. As a Monte Carlo (MC) based method, the EnKF usually requires a large ensemble size, which poses a high computational cost for large scale problems. In this work, we propose a probabilistic collocation based iterative Kalman filter (PCIKF) to estimate permeability in a liquid-gas coupling model. This method employs polynomial chaos expansion (PCE) to represent and propagate the uncertainties of model parameters and states, and an iterative form of Kalman filter to assimilate the current gas pressure data. To further reduce the computation cost, the functional ANOVA (analysis of variance) decomposition is conducted, and only the first order ANOVA components are remained for PCE. Illustrated with numerical case studies, this proposed method shows significant superiority in computation efficiency compared with the traditional MC based iterative EnKF. The developed method has promising potential in reliable prediction and management of landfill gas production.

Bias, precision and statistical power of analysis of covariance in the analysis of randomized trials with baseline imbalance: a simulation study.

PubMed

Egbewale, Bolaji E; Lewis, Martyn; Sim, Julius

2014-04-09

Analysis of variance (ANOVA), change-score analysis (CSA) and analysis of covariance (ANCOVA) respond differently to baseline imbalance in randomized controlled trials. However, no empirical studies appear to have quantified the differential bias and precision of estimates derived from these methods of analysis, and their relative statistical power, in relation to combinations of levels of key trial characteristics. This simulation study therefore examined the relative bias, precision and statistical power of these three analyses using simulated trial data. 126 hypothetical trial scenarios were evaluated (126,000 datasets), each with continuous data simulated by using a combination of levels of: treatment effect; pretest-posttest correlation; direction and magnitude of baseline imbalance. The bias, precision and power of each method of analysis were calculated for each scenario. Compared to the unbiased estimates produced by ANCOVA, both ANOVA and CSA are subject to bias, in relation to pretest-posttest correlation and the direction of baseline imbalance. Additionally, ANOVA and CSA are less precise than ANCOVA, especially when pretest-posttest correlation ≥ 0.3. When groups are balanced at baseline, ANCOVA is at least as powerful as the other analyses. Apparently greater power of ANOVA and CSA at certain imbalances is achieved in respect of a biased treatment effect. Across a range of correlations between pre- and post-treatment scores and at varying levels and direction of baseline imbalance, ANCOVA remains the optimum statistical method for the analysis of continuous outcomes in RCTs, in terms of bias, precision and statistical power.

Comparing Bayesian estimates of genetic differentiation of molecular markers and quantitative traits: an application to Pinus sylvestris.

PubMed

Waldmann, P; García-Gil, M R; Sillanpää, M J

2005-06-01

Comparison of the level of differentiation at neutral molecular markers (estimated as F(ST) or G(ST)) with the level of differentiation at quantitative traits (estimated as Q(ST)) has become a standard tool for inferring that there is differential selection between populations. We estimated Q(ST) of timing of bud set from a latitudinal cline of Pinus sylvestris with a Bayesian hierarchical variance component method utilizing the information on the pre-estimated population structure from neutral molecular markers. Unfortunately, the between-family variances differed substantially between populations that resulted in a bimodal posterior of Q(ST) that could not be compared in any sensible way with the unimodal posterior of the microsatellite F(ST). In order to avoid publishing studies with flawed Q(ST) estimates, we recommend that future studies should present heritability estimates for each trait and population. Moreover, to detect variance heterogeneity in frequentist methods (ANOVA and REML), it is of essential importance to check also that the residuals are normally distributed and do not follow any systematically deviating trends.

Combining ANOVA-PCA with POCHEMON to analyse micro-organism development in a polymicrobial environment.

PubMed

Geurts, Brigitte P; Neerincx, Anne H; Bertrand, Samuel; Leemans, Manja A A P; Postma, Geert J; Wolfender, Jean-Luc; Cristescu, Simona M; Buydens, Lutgarde M C; Jansen, Jeroen J

2017-04-22

Revealing the biochemistry associated to micro-organismal interspecies interactions is highly relevant for many purposes. Each pathogen has a characteristic metabolic fingerprint that allows identification based on their unique multivariate biochemistry. When pathogen species come into mutual contact, their co-culture will display a chemistry that may be attributed both to mixing of the characteristic chemistries of the mono-cultures and to competition between the pathogens. Therefore, investigating pathogen development in a polymicrobial environment requires dedicated chemometric methods to untangle and focus upon these sources of variation. The multivariate data analysis method Projected Orthogonalised Chemical Encounter Monitoring (POCHEMON) is dedicated to highlight metabolites characteristic for the interaction of two micro-organisms in co-culture. However, this approach is currently limited to a single time-point, while development of polymicrobial interactions may be highly dynamic. A well-known multivariate implementation of Analysis of Variance (ANOVA) uses Principal Component Analysis (ANOVA-PCA). This allows the overall dynamics to be separated from the pathogen-specific chemistry to analyse the contributions of both aspects separately. For this reason, we propose to integrate ANOVA-PCA with the POCHEMON approach to disentangle the pathogen dynamics and the specific biochemistry in interspecies interactions. Two complementary case studies show great potential for both liquid and gas chromatography - mass spectrometry to reveal novel information on chemistry specific to interspecies interaction during pathogen development. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.

Improved Stress Corrosion Cracking Resistance and Strength of a Two-Step Aged Al-Zn-Mg-Cu Alloy Using Taguchi Method

NASA Astrophysics Data System (ADS)

Lin, Lianghua; Liu, Zhiyi; Ying, Puyou; Liu, Meng

2015-12-01

Multi-step heat treatment effectively enhances the stress corrosion cracking (SCC) resistance but usually degrades the mechanical properties of Al-Zn-Mg-Cu alloys. With the aim to enhance SCC resistance as well as strength of Al-Zn-Mg-Cu alloys, we have optimized the process parameters during two-step aging of Al-6.1Zn-2.8Mg-1.9Cu alloy by Taguchi's L9 orthogonal array. In this work, analysis of variance (ANOVA) was performed to find out the significant heat treatment parameters. The slow strain rate testing combined with scanning electron microscope and transmission electron microscope was employed to study the SCC behaviors of Al-Zn-Mg-Cu alloy. Results showed that the contour map produced by ANOVA offered a reliable reference for selection of optimum heat treatment parameters. By using this method, a desired combination of mechanical performances and SCC resistance was obtained.

An Investigation of Collaborative Leadership

DTIC Science & Technology

2013-01-01

businesses . The second will use an analysis of variance (ANOVA) to statistically compare the variance among organizations. Research regarding collaborative...horizontal column of the “T,” a leader is networking across the larger business model to understand how their organization’s core skills can be used in...the exchange of information or services among individuals, groups, or institutions in order to cultivate productive business relationships

Surface roughness of glass ionomer cements indicated for uncooperative patients according to surface protection treatment

PubMed Central

Pacifici, Edoardo; Bossù, Maurizio; Giovannetti, Agostino; La Torre, Giuseppe; Guerra, Fabrizio; Polimeni, Antonella

2013-01-01

Summary Background Even today, use of Glass Ionomer Cements (GIC) as restorative material is indicated for uncooperative patients. Aim The study aimed at estimating the surface roughness of different GICs using or not their proprietary surface coatings and at observing the interfaces between cement and coating through SEM. Materials and methods Forty specimens have been obtained and divided into 4 groups: Fuji IX (IX), Fuji IX/G-Coat Plus (IXC), Vitremer (V), Vitremer/Finishing Gloss (VFG). Samples were obtained using silicone moulds to simulate class I restorations. All specimens were processed for profilometric evaluation. The statistical differences of surface roughness between groups were assessed using One-Way Analysis of Variance (One-Way ANOVA) (p<0.05). The Two-Way Analysis of Variance (Two-Way ANOVA) was used to evaluate the influence of two factors: restoration material and presence of coating. Coated restoration specimens (IXC and VFG) were sectioned perpendicular to the restoration surface and processed for SEM evaluation. Results No statistical differences in roughness could be noticed between groups or factors. Following microscopic observation, interfaces between restoration material and coating were better for group IXC than for group VFG. Conclusions When specimens are obtained simulating normal clinical procedures, the presence of surface protection does not significantly improve the surface roughness of GICs. PMID:24611090

Comparison of central corneal thickness measurements using ultrasound pachymetry, ultrasound biomicroscopy, and the Artemis-2 VHF scanner in normal eyes

PubMed Central

Al-Farhan, Haya M; Al-Otaibi, Wafa’a Majed

2012-01-01

Purpose To compare the precision of central corneal thickness (CCT) measurements taken with the handheld ultrasound pachymeter (USP), ultrasound biomicroscopy (UBM), and the Artemis-2 very high frequency ultrasound scanner (VHFUS) on normal subjects. Design Prospective study. Methods One eye from each of 61 normal subjects was randomly selected for this study. The measurements of the CCT were taken with the USP, VHFUS, and UBM. Results were compared statistically using repeated-measures analysis of variance (ANOVA), Pearson’s correlation coefficient, and limits of agreement. Results The average CCT (± standard deviation) was 530.1 ± 30.5 μm, 554.9 ± 31.7 μm, and 559.5 ± 30.7 μm for UBM, VHFUS, and USP respectively. The intraobserver repeatability analyses of variance are not significant for USP, UBM, and VHFUS. P-values were 0.17, 0.19, and 0.37 respectively. Repeated-measures ANOVA showed a significant difference between the three different methods of measuring CCT (P = 0.0001). The ANOVA test revealed no statistically significant difference between USP and VHFUS (P > 0.05), yet statistical significant differences with UBM versus USP and UBM versus VHFUS (P < 0.001). There were high correlations between the three instruments (P < 0.0001). The mean differences (and upper/lower limits of agreement) for CCT measurements were 29.4 ± 14.3 (2.7/56), 4.6 ± 8.6 (−14.7/23.8), and −24.8 ± 13.1 (−50.4/0.8) for USP versus UBM, USP versus VHFUS, and UBM versus VHFUS, respectively. Conclusion The UBM produces CCT measurements that vary significantly from those returned by the USP and the VHFUS, suggesting that the UBM may not be used interchangeably with either equipment for monitoring the CCT in the clinical setting. PMID:22848145

Approximate Sample Size Formulas for Testing Group Mean Differences when Variances Are Unequal in One-Way ANOVA

ERIC Educational Resources Information Center

Guo, Jiin-Huarng; Luh, Wei-Ming

2008-01-01

This study proposes an approach for determining appropriate sample size for Welch's F test when unequal variances are expected. Given a certain maximum deviation in population means and using the quantile of F and t distributions, there is no need to specify a noncentrality parameter and it is easy to estimate the approximate sample size needed…

Adaptive surrogate modeling by ANOVA and sparse polynomial dimensional decomposition for global sensitivity analysis in fluid simulation

NASA Astrophysics Data System (ADS)

Tang, Kunkun; Congedo, Pietro M.; Abgrall, Rémi

2016-06-01

The Polynomial Dimensional Decomposition (PDD) is employed in this work for the global sensitivity analysis and uncertainty quantification (UQ) of stochastic systems subject to a moderate to large number of input random variables. Due to the intimate connection between the PDD and the Analysis of Variance (ANOVA) approaches, PDD is able to provide a simpler and more direct evaluation of the Sobol' sensitivity indices, when compared to the Polynomial Chaos expansion (PC). Unfortunately, the number of PDD terms grows exponentially with respect to the size of the input random vector, which makes the computational cost of standard methods unaffordable for real engineering applications. In order to address the problem of the curse of dimensionality, this work proposes essentially variance-based adaptive strategies aiming to build a cheap meta-model (i.e. surrogate model) by employing the sparse PDD approach with its coefficients computed by regression. Three levels of adaptivity are carried out in this paper: 1) the truncated dimensionality for ANOVA component functions, 2) the active dimension technique especially for second- and higher-order parameter interactions, and 3) the stepwise regression approach designed to retain only the most influential polynomials in the PDD expansion. During this adaptive procedure featuring stepwise regressions, the surrogate model representation keeps containing few terms, so that the cost to resolve repeatedly the linear systems of the least-squares regression problem is negligible. The size of the finally obtained sparse PDD representation is much smaller than the one of the full expansion, since only significant terms are eventually retained. Consequently, a much smaller number of calls to the deterministic model is required to compute the final PDD coefficients.

A Hybrid One-Way ANOVA Approach for the Robust and Efficient Estimation of Differential Gene Expression with Multiple Patterns

PubMed Central

Mollah, Mohammad Manir Hossain; Jamal, Rahman; Mokhtar, Norfilza Mohd; Harun, Roslan; Mollah, Md. Nurul Haque

2015-01-01

Background Identifying genes that are differentially expressed (DE) between two or more conditions with multiple patterns of expression is one of the primary objectives of gene expression data analysis. Several statistical approaches, including one-way analysis of variance (ANOVA), are used to identify DE genes. However, most of these methods provide misleading results for two or more conditions with multiple patterns of expression in the presence of outlying genes. In this paper, an attempt is made to develop a hybrid one-way ANOVA approach that unifies the robustness and efficiency of estimation using the minimum β-divergence method to overcome some problems that arise in the existing robust methods for both small- and large-sample cases with multiple patterns of expression. Results The proposed method relies on a β-weight function, which produces values between 0 and 1. The β-weight function with β = 0.2 is used as a measure of outlier detection. It assigns smaller weights (≥ 0) to outlying expressions and larger weights (≤ 1) to typical expressions. The distribution of the β-weights is used to calculate the cut-off point, which is compared to the observed β-weight of an expression to determine whether that gene expression is an outlier. This weight function plays a key role in unifying the robustness and efficiency of estimation in one-way ANOVA. Conclusion Analyses of simulated gene expression profiles revealed that all eight methods (ANOVA, SAM, LIMMA, EBarrays, eLNN, KW, robust BetaEB and proposed) perform almost identically for m = 2 conditions in the absence of outliers. However, the robust BetaEB method and the proposed method exhibited considerably better performance than the other six methods in the presence of outliers. In this case, the BetaEB method exhibited slightly better performance than the proposed method for the small-sample cases, but the the proposed method exhibited much better performance than the BetaEB method for both the small- and large-sample cases in the presence of more than 50% outlying genes. The proposed method also exhibited better performance than the other methods for m > 2 conditions with multiple patterns of expression, where the BetaEB was not extended for this condition. Therefore, the proposed approach would be more suitable and reliable on average for the identification of DE genes between two or more conditions with multiple patterns of expression. PMID:26413858

Quantifying the impact of fixed effects modeling of clusters in multiple imputation for cluster randomized trials

PubMed Central

Andridge, Rebecca. R.

2011-01-01

In cluster randomized trials (CRTs), identifiable clusters rather than individuals are randomized to study groups. Resulting data often consist of a small number of clusters with correlated observations within a treatment group. Missing data often present a problem in the analysis of such trials, and multiple imputation (MI) has been used to create complete data sets, enabling subsequent analysis with well-established analysis methods for CRTs. We discuss strategies for accounting for clustering when multiply imputing a missing continuous outcome, focusing on estimation of the variance of group means as used in an adjusted t-test or ANOVA. These analysis procedures are congenial to (can be derived from) a mixed effects imputation model; however, this imputation procedure is not yet available in commercial statistical software. An alternative approach that is readily available and has been used in recent studies is to include fixed effects for cluster, but the impact of using this convenient method has not been studied. We show that under this imputation model the MI variance estimator is positively biased and that smaller ICCs lead to larger overestimation of the MI variance. Analytical expressions for the bias of the variance estimator are derived in the case of data missing completely at random (MCAR), and cases in which data are missing at random (MAR) are illustrated through simulation. Finally, various imputation methods are applied to data from the Detroit Middle School Asthma Project, a recent school-based CRT, and differences in inference are compared. PMID:21259309

Multiple comparison analysis testing in ANOVA.

PubMed

McHugh, Mary L

2011-01-01

The Analysis of Variance (ANOVA) test has long been an important tool for researchers conducting studies on multiple experimental groups and one or more control groups. However, ANOVA cannot provide detailed information on differences among the various study groups, or on complex combinations of study groups. To fully understand group differences in an ANOVA, researchers must conduct tests of the differences between particular pairs of experimental and control groups. Tests conducted on subsets of data tested previously in another analysis are called post hoc tests. A class of post hoc tests that provide this type of detailed information for ANOVA results are called "multiple comparison analysis" tests. The most commonly used multiple comparison analysis statistics include the following tests: Tukey, Newman-Keuls, Scheffee, Bonferroni and Dunnett. These statistical tools each have specific uses, advantages and disadvantages. Some are best used for testing theory while others are useful in generating new theory. Selection of the appropriate post hoc test will provide researchers with the most detailed information while limiting Type 1 errors due to alpha inflation.

Parametric and non-parametric approach for sensory RATA (Rate-All-That-Apply) method of ledre profile attributes

NASA Astrophysics Data System (ADS)

Hastuti, S.; Harijono; Murtini, E. S.; Fibrianto, K.

2018-03-01

This current study is aimed to investigate the use of parametric and non-parametric approach for sensory RATA (Rate-All-That-Apply) method. Ledre as Bojonegoro unique local food product was used as point of interest, in which 319 panelists were involved in the study. The result showed that ledre is characterized as easy-crushed texture, sticky in mouth, stingy sensation and easy to swallow. It has also strong banana flavour with brown in colour. Compared to eggroll and semprong, ledre has more variances in terms of taste as well the roll length. As RATA questionnaire is designed to collect categorical data, non-parametric approach is the common statistical procedure. However, similar results were also obtained as parametric approach, regardless the fact of non-normal distributed data. Thus, it suggests that parametric approach can be applicable for consumer study with large number of respondents, even though it may not satisfy the assumption of ANOVA (Analysis of Variances).

Repeatability and reproducibility of ribotyping and its computer interpretation.

PubMed

Lefresne, Gwénola; Latrille, Eric; Irlinger, Françoise; Grimont, Patrick A D

2004-04-01

Many molecular typing methods are difficult to interpret because their repeatability (within-laboratory variance) and reproducibility (between-laboratory variance) have not been thoroughly studied. In the present work, ribotyping of coryneform bacteria was the basis of a study involving within-gel and between-gel repeatability and between-laboratory reproducibility (two laboratories involved). The effect of different technical protocols, different algorithms, and different software for fragment size determination was studied. Analysis of variance (ANOVA) showed, within a laboratory, that there was no significant added variance between gels. However, between-laboratory variance was significantly higher than within-laboratory variance. This may be due to the use of different protocols. An experimental function was calculated to transform the data and make them compatible (i.e., erase the between-laboratory variance). The use of different interpolation algorithms (spline, Schaffer and Sederoff) was a significant source of variation in one laboratory only. The use of either Taxotron (Institut Pasteur) or GelCompar (Applied Maths) was not a significant source of added variation when the same algorithm (spline) was used. However, the use of Bio-Gene (Vilber Lourmat) dramatically increased the error (within laboratory, within gel) in one laboratory, while decreasing the error in the other laboratory; this might be due to automatic normalization attempts. These results were taken into account for building a database and performing automatic pattern identification using Taxotron. Conversion of the data considerably improved the identification of patterns irrespective of the laboratory in which the data were obtained.

Quantitative knowledge acquisition for expert systems

NASA Technical Reports Server (NTRS)

Belkin, Brenda L.; Stengel, Robert F.

1991-01-01

A common problem in the design of expert systems is the definition of rules from data obtained in system operation or simulation. While it is relatively easy to collect data and to log the comments of human operators engaged in experiments, generalizing such information to a set of rules has not previously been a direct task. A statistical method is presented for generating rule bases from numerical data, motivated by an example based on aircraft navigation with multiple sensors. The specific objective is to design an expert system that selects a satisfactory suite of measurements from a dissimilar, redundant set, given an arbitrary navigation geometry and possible sensor failures. The systematic development is described of a Navigation Sensor Management (NSM) Expert System from Kalman Filter convariance data. The method invokes two statistical techniques: Analysis of Variance (ANOVA) and the ID3 Algorithm. The ANOVA technique indicates whether variations of problem parameters give statistically different covariance results, and the ID3 algorithms identifies the relationships between the problem parameters using probabilistic knowledge extracted from a simulation example set. Both are detailed.

LED traffic signal replacement schedules : facilitating smooth freight flows.

DOT National Transportation Integrated Search

2011-11-01

This research details a field study of LED traffic signals in Missouri and develops a replacement schedule based on key findings. : Rates of degradation were statistically analyzed using Analysis of Variance (ANOVA). Results of this research will pro...

Exploring Omics data from designed experiments using analysis of variance multiblock Orthogonal Partial Least Squares.

PubMed

Boccard, Julien; Rudaz, Serge

2016-05-12

Many experimental factors may have an impact on chemical or biological systems. A thorough investigation of the potential effects and interactions between the factors is made possible by rationally planning the trials using systematic procedures, i.e. design of experiments. However, assessing factors' influences remains often a challenging task when dealing with hundreds to thousands of correlated variables, whereas only a limited number of samples is available. In that context, most of the existing strategies involve the ANOVA-based partitioning of sources of variation and the separate analysis of ANOVA submatrices using multivariate methods, to account for both the intrinsic characteristics of the data and the study design. However, these approaches lack the ability to summarise the data using a single model and remain somewhat limited for detecting and interpreting subtle perturbations hidden in complex Omics datasets. In the present work, a supervised multiblock algorithm based on the Orthogonal Partial Least Squares (OPLS) framework, is proposed for the joint analysis of ANOVA submatrices. This strategy has several advantages: (i) the evaluation of a unique multiblock model accounting for all sources of variation; (ii) the computation of a robust estimator (goodness of fit) for assessing the ANOVA decomposition reliability; (iii) the investigation of an effect-to-residuals ratio to quickly evaluate the relative importance of each effect and (iv) an easy interpretation of the model with appropriate outputs. Case studies from metabolomics and transcriptomics, highlighting the ability of the method to handle Omics data obtained from fixed-effects full factorial designs, are proposed for illustration purposes. Signal variations are easily related to main effects or interaction terms, while relevant biochemical information can be derived from the models. Copyright © 2016 Elsevier B.V. All rights reserved.

Application of principal component analysis (PCA) as a sensory assessment tool for fermented food products.

PubMed

Ghosh, Debasree; Chattopadhyay, Parimal

2012-06-01

The objective of the work was to use the method of quantitative descriptive analysis (QDA) to describe the sensory attributes of the fermented food products prepared with the incorporation of lactic cultures. Panellists were selected and trained to evaluate various attributes specially color and appearance, body texture, flavor, overall acceptability and acidity of the fermented food products like cow milk curd and soymilk curd, idli, sauerkraut and probiotic ice cream. Principal component analysis (PCA) identified the six significant principal components that accounted for more than 90% of the variance in the sensory attribute data. Overall product quality was modelled as a function of principal components using multiple least squares regression (R (2) = 0.8). The result from PCA was statistically analyzed by analysis of variance (ANOVA). These findings demonstrate the utility of quantitative descriptive analysis for identifying and measuring the fermented food product attributes that are important for consumer acceptability.

Modelling uncertainty in incompressible flow simulation using Galerkin based generalized ANOVA

NASA Astrophysics Data System (ADS)

Chakraborty, Souvik; Chowdhury, Rajib

2016-11-01

This paper presents a new algorithm, referred to here as Galerkin based generalized analysis of variance decomposition (GG-ANOVA) for modelling input uncertainties and its propagation in incompressible fluid flow. The proposed approach utilizes ANOVA to represent the unknown stochastic response. Further, the unknown component functions of ANOVA are represented using the generalized polynomial chaos expansion (PCE). The resulting functional form obtained by coupling the ANOVA and PCE is substituted into the stochastic Navier-Stokes equation (NSE) and Galerkin projection is employed to decompose it into a set of coupled deterministic 'Navier-Stokes alike' equations. Temporal discretization of the set of coupled deterministic equations is performed by employing Adams-Bashforth scheme for convective term and Crank-Nicolson scheme for diffusion term. Spatial discretization is performed by employing finite difference scheme. Implementation of the proposed approach has been illustrated by two examples. In the first example, a stochastic ordinary differential equation has been considered. This example illustrates the performance of proposed approach with change in nature of random variable. Furthermore, convergence characteristics of GG-ANOVA has also been demonstrated. The second example investigates flow through a micro channel. Two case studies, namely the stochastic Kelvin-Helmholtz instability and stochastic vortex dipole, have been investigated. For all the problems results obtained using GG-ANOVA are in excellent agreement with benchmark solutions.

ANALYSES OF NEUROBEHAVIORAL SCREENING DATA: BENCHMARK DOSE ESTIMATION.

EPA Science Inventory

Analysis of neurotoxicological screening data such as those of the functional observational battery (FOB) traditionally relies on analysis of variance (ANOVA) with repeated measurements, followed by determination of a no-adverse-effect level (NOAEL). The US EPA has proposed the ...

An ANOVA approach for statistical comparisons of brain networks.

PubMed

Fraiman, Daniel; Fraiman, Ricardo

2018-03-16

The study of brain networks has developed extensively over the last couple of decades. By contrast, techniques for the statistical analysis of these networks are less developed. In this paper, we focus on the statistical comparison of brain networks in a nonparametric framework and discuss the associated detection and identification problems. We tested network differences between groups with an analysis of variance (ANOVA) test we developed specifically for networks. We also propose and analyse the behaviour of a new statistical procedure designed to identify different subnetworks. As an example, we show the application of this tool in resting-state fMRI data obtained from the Human Connectome Project. We identify, among other variables, that the amount of sleep the days before the scan is a relevant variable that must be controlled. Finally, we discuss the potential bias in neuroimaging findings that is generated by some behavioural and brain structure variables. Our method can also be applied to other kind of networks such as protein interaction networks, gene networks or social networks.

Split-plot microarray experiments: issues of design, power and sample size.

PubMed

Tsai, Pi-Wen; Lee, Mei-Ling Ting

2005-01-01

This article focuses on microarray experiments with two or more factors in which treatment combinations of the factors corresponding to the samples paired together onto arrays are not completely random. A main effect of one (or more) factor(s) is confounded with arrays (the experimental blocks). This is called a split-plot microarray experiment. We utilise an analysis of variance (ANOVA) model to assess differentially expressed genes for between-array and within-array comparisons that are generic under a split-plot microarray experiment. Instead of standard t- or F-test statistics that rely on mean square errors of the ANOVA model, we use a robust method, referred to as 'a pooled percentile estimator', to identify genes that are differentially expressed across different treatment conditions. We illustrate the design and analysis of split-plot microarray experiments based on a case application described by Jin et al. A brief discussion of power and sample size for split-plot microarray experiments is also presented.

Inferential Processing among Adequate and Struggling Adolescent Comprehenders and Relations to Reading Comprehension

PubMed Central

Barth, Amy E.; Barnes, Marcia; Francis, David J.; Vaughn, Sharon; York, Mary

2015-01-01

Separate mixed model analyses of variance (ANOVA) were conducted to examine the effect of textual distance on the accuracy and speed of text consistency judgments among adequate and struggling comprehenders across grades 6–12 (n = 1203). Multiple regressions examined whether accuracy in text consistency judgments uniquely accounted for variance in comprehension. Results suggest that there is considerable growth across the middle and high school years, particularly for adequate comprehenders in those text integration processes that maintain local coherence. Accuracy in text consistency judgments accounted for significant unique variance for passage-level, but not sentence-level comprehension, particularly for adequate comprehenders. PMID:26166946

Hypothesis exploration with visualization of variance

PubMed Central

2014-01-01

Background The Consortium for Neuropsychiatric Phenomics (CNP) at UCLA was an investigation into the biological bases of traits such as memory and response inhibition phenotypes—to explore whether they are linked to syndromes including ADHD, Bipolar disorder, and Schizophrenia. An aim of the consortium was in moving from traditional categorical approaches for psychiatric syndromes towards more quantitative approaches based on large-scale analysis of the space of human variation. It represented an application of phenomics—wide-scale, systematic study of phenotypes—to neuropsychiatry research. Results This paper reports on a system for exploration of hypotheses in data obtained from the LA2K, LA3C, and LA5C studies in CNP. ViVA is a system for exploratory data analysis using novel mathematical models and methods for visualization of variance. An example of these methods is called VISOVA, a combination of visualization and analysis of variance, with the flavor of exploration associated with ANOVA in biomedical hypothesis generation. It permits visual identification of phenotype profiles—patterns of values across phenotypes—that characterize groups. Visualization enables screening and refinement of hypotheses about variance structure of sets of phenotypes. Conclusions The ViVA system was designed for exploration of neuropsychiatric hypotheses by interdisciplinary teams. Automated visualization in ViVA supports ‘natural selection’ on a pool of hypotheses, and permits deeper understanding of the statistical architecture of the data. Large-scale perspective of this kind could lead to better neuropsychiatric diagnostics. PMID:25097666

Error in geometric morphometric data collection: Combining data from multiple sources.

PubMed

Robinson, Chris; Terhune, Claire E

2017-09-01

This study compares two- and three-dimensional morphometric data to determine the extent to which intra- and interobserver and intermethod error influence the outcomes of statistical analyses. Data were collected five times for each method and observer on 14 anthropoid crania using calipers, a MicroScribe, and 3D models created from NextEngine and microCT scans. ANOVA models were used to examine variance in the linear data at the level of genus, species, specimen, observer, method, and trial. Three-dimensional data were analyzed using geometric morphometric methods; principal components analysis was employed to examine how trials of all specimens were distributed in morphospace and Procrustes distances among trials were calculated and used to generate UPGMA trees to explore whether all trials of the same individual grouped together regardless of observer or method. Most variance in the linear data was at the genus level, with greater variance at the observer than method levels. In the 3D data, interobserver and intermethod error were similar to intraspecific distances among Callicebus cupreus individuals, with interobserver error being higher than intermethod error. Generally, taxa separate well in morphospace, with different trials of the same specimen typically grouping together. However, trials of individuals in the same species overlapped substantially with one another. Researchers should be cautious when compiling data from multiple methods and/or observers, especially if analyses are focused on intraspecific variation or closely related species, as in these cases, patterns among individuals may be obscured by interobserver and intermethod error. Conducting interobserver and intermethod reliability assessments prior to the collection of data is recommended. © 2017 Wiley Periodicals, Inc.

Variation in Seed Germination of 134 Common Species on the Eastern Tibetan Plateau: Phylogenetic, Life History and Environmental Correlates

PubMed Central

Xu, Jing; Li, Wenlong; Zhang, Chunhui; Liu, Wei; Du, Guozhen

2014-01-01

Seed germination is a crucial stage in the life history of a species because it represents the pathway from adult to offspring, and it can affect the distribution and abundance of species in communities. In this study, we examined the effects of phylogenetic, life history and environmental factors on seed germination of 134 common species from an alpine/subalpine meadow on the eastern Tibetan Plateau. In one-way ANOVAs, phylogenetic groups (at or above order) explained 13.0% and 25.9% of the variance in germination percentage and mean germination time, respectively; life history attributes, such as seed size, dispersal mode, explained 3.7%, 2.1% of the variance in germination percentage and 6.3%, 8.7% of the variance in mean germination time, respectively; the environmental factors temperature and habitat explained 4.7%, 1.0% of the variance in germination percentage and 13.5%, 1.7% of the variance in mean germination time, respectively. Our results demonstrated that elevated temperature would lead to a significant increase in germination percentage and an accelerated germination. Multi-factorial ANOVAs showed that the three major factors contributing to differences in germination percentage and mean germination time in this alpine/subalpine meadow were phylogenetic attributes, temperature and seed size (explained 10.5%, 4.7% and 1.4% of the variance in germination percentage independently, respectively; and explained 14.9%, 13.5% and 2.7% of the variance in mean germination time independently, respectively). In addition, there were strong associations between phylogenetic group and life history attributes, and between life history attributes and environmental factors. Therefore, germination variation are constrained mainly by phylogenetic inertia in a community, and seed germination variation correlated with phylogeny is also associated with life history attributes, suggesting a role of niche adaptation in the conservation of germination variation within lineages. Meanwhile, selection can maintain the association between germination behavior and the environmental conditions within a lineage. PMID:24893308

Life expectancy evaluation and development of a replacement schedule for LED traffic signals.

DOT National Transportation Integrated Search

2011-03-01

This research details a field study of LED traffic signals in Missouri and develops a replacement schedule : based on key findings. Rates of degradation were statistically analyzed using Analysis of Variance : (ANOVA). Results of this research will p...

An adaptive least-squares global sensitivity method and application to a plasma-coupled combustion prediction with parametric correlation

NASA Astrophysics Data System (ADS)

Tang, Kunkun; Massa, Luca; Wang, Jonathan; Freund, Jonathan B.

2018-05-01

We introduce an efficient non-intrusive surrogate-based methodology for global sensitivity analysis and uncertainty quantification. Modified covariance-based sensitivity indices (mCov-SI) are defined for outputs that reflect correlated effects. The overall approach is applied to simulations of a complex plasma-coupled combustion system with disparate uncertain parameters in sub-models for chemical kinetics and a laser-induced breakdown ignition seed. The surrogate is based on an Analysis of Variance (ANOVA) expansion, such as widely used in statistics, with orthogonal polynomials representing the ANOVA subspaces and a polynomial dimensional decomposition (PDD) representing its multi-dimensional components. The coefficients of the PDD expansion are obtained using a least-squares regression, which both avoids the direct computation of high-dimensional integrals and affords an attractive flexibility in choosing sampling points. This facilitates importance sampling using a Bayesian calibrated posterior distribution, which is fast and thus particularly advantageous in common practical cases, such as our large-scale demonstration, for which the asymptotic convergence properties of polynomial expansions cannot be realized due to computation expense. Effort, instead, is focused on efficient finite-resolution sampling. Standard covariance-based sensitivity indices (Cov-SI) are employed to account for correlation of the uncertain parameters. Magnitude of Cov-SI is unfortunately unbounded, which can produce extremely large indices that limit their utility. Alternatively, mCov-SI are then proposed in order to bound this magnitude ∈ [ 0 , 1 ]. The polynomial expansion is coupled with an adaptive ANOVA strategy to provide an accurate surrogate as the union of several low-dimensional spaces, avoiding the typical computational cost of a high-dimensional expansion. It is also adaptively simplified according to the relative contribution of the different polynomials to the total variance. The approach is demonstrated for a laser-induced turbulent combustion simulation model, which includes parameters with correlated effects.

Tools for Basic Statistical Analysis

NASA Technical Reports Server (NTRS)

Luz, Paul L.

2005-01-01

Statistical Analysis Toolset is a collection of eight Microsoft Excel spreadsheet programs, each of which performs calculations pertaining to an aspect of statistical analysis. These programs present input and output data in user-friendly, menu-driven formats, with automatic execution. The following types of calculations are performed: Descriptive statistics are computed for a set of data x(i) (i = 1, 2, 3 . . . ) entered by the user. Normal Distribution Estimates will calculate the statistical value that corresponds to cumulative probability values, given a sample mean and standard deviation of the normal distribution. Normal Distribution from two Data Points will extend and generate a cumulative normal distribution for the user, given two data points and their associated probability values. Two programs perform two-way analysis of variance (ANOVA) with no replication or generalized ANOVA for two factors with four levels and three repetitions. Linear Regression-ANOVA will curvefit data to the linear equation y=f(x) and will do an ANOVA to check its significance.

Minimum number of measurements for evaluating Bertholletia excelsa.

PubMed

Baldoni, A B; Tonini, H; Tardin, F D; Botelho, S C C; Teodoro, P E

2017-09-27

Repeatability studies on fruit species are of great importance to identify the minimum number of measurements necessary to accurately select superior genotypes. This study aimed to identify the most efficient method to estimate the repeatability coefficient (r) and predict the minimum number of measurements needed for a more accurate evaluation of Brazil nut tree (Bertholletia excelsa) genotypes based on fruit yield. For this, we assessed the number of fruits and dry mass of seeds of 75 Brazil nut genotypes, from native forest, located in the municipality of Itaúba, MT, for 5 years. To better estimate r, four procedures were used: analysis of variance (ANOVA), principal component analysis based on the correlation matrix (CPCOR), principal component analysis based on the phenotypic variance and covariance matrix (CPCOV), and structural analysis based on the correlation matrix (mean r - AECOR). There was a significant effect of genotypes and measurements, which reveals the need to study the minimum number of measurements for selecting superior Brazil nut genotypes for a production increase. Estimates of r by ANOVA were lower than those observed with the principal component methodology and close to AECOR. The CPCOV methodology provided the highest estimate of r, which resulted in a lower number of measurements needed to identify superior Brazil nut genotypes for the number of fruits and dry mass of seeds. Based on this methodology, three measurements are necessary to predict the true value of the Brazil nut genotypes with a minimum accuracy of 85%.

Optimization of segmented thermoelectric generator using Taguchi and ANOVA techniques.

PubMed

Kishore, Ravi Anant; Sanghadasa, Mohan; Priya, Shashank

2017-12-01

Recent studies have demonstrated that segmented thermoelectric generators (TEGs) can operate over large thermal gradient and thus provide better performance (reported efficiency up to 11%) as compared to traditional TEGs, comprising of single thermoelectric (TE) material. However, segmented TEGs are still in early stages of development due to the inherent complexity in their design optimization and manufacturability. In this study, we demonstrate physics based numerical techniques along with Analysis of variance (ANOVA) and Taguchi optimization method for optimizing the performance of segmented TEGs. We have considered comprehensive set of design parameters, such as geometrical dimensions of p-n legs, height of segmentation, hot-side temperature, and load resistance, in order to optimize output power and efficiency of segmented TEGs. Using the state-of-the-art TE material properties and appropriate statistical tools, we provide near-optimum TEG configuration with only 25 experiments as compared to 3125 experiments needed by the conventional optimization methods. The effect of environmental factors on the optimization of segmented TEGs is also studied. Taguchi results are validated against the results obtained using traditional full factorial optimization technique and a TEG configuration for simultaneous optimization of power and efficiency is obtained.

Application of texture analysis method for mammogram density classification

NASA Astrophysics Data System (ADS)

Nithya, R.; Santhi, B.

2017-07-01

Mammographic density is considered a major risk factor for developing breast cancer. This paper proposes an automated approach to classify breast tissue types in digital mammogram. The main objective of the proposed Computer-Aided Diagnosis (CAD) system is to investigate various feature extraction methods and classifiers to improve the diagnostic accuracy in mammogram density classification. Texture analysis methods are used to extract the features from the mammogram. Texture features are extracted by using histogram, Gray Level Co-Occurrence Matrix (GLCM), Gray Level Run Length Matrix (GLRLM), Gray Level Difference Matrix (GLDM), Local Binary Pattern (LBP), Entropy, Discrete Wavelet Transform (DWT), Wavelet Packet Transform (WPT), Gabor transform and trace transform. These extracted features are selected using Analysis of Variance (ANOVA). The features selected by ANOVA are fed into the classifiers to characterize the mammogram into two-class (fatty/dense) and three-class (fatty/glandular/dense) breast density classification. This work has been carried out by using the mini-Mammographic Image Analysis Society (MIAS) database. Five classifiers are employed namely, Artificial Neural Network (ANN), Linear Discriminant Analysis (LDA), Naive Bayes (NB), K-Nearest Neighbor (KNN), and Support Vector Machine (SVM). Experimental results show that ANN provides better performance than LDA, NB, KNN and SVM classifiers. The proposed methodology has achieved 97.5% accuracy for three-class and 99.37% for two-class density classification.

Factors influencing heterogeneity of radiation-induced DNA-damage measured by the alkaline comet assay

PubMed Central

2012-01-01

Background To investigate whether different conditions of DNA structure and radiation treatment could modify heterogeneity of response. Additionally to study variance as a potential parameter of heterogeneity for radiosensitivity testing. Methods Two-hundred leukocytes per sample of healthy donors were split into four groups. I: Intact chromatin structure; II: Nucleoids of histone-depleted DNA; III: Nucleoids of histone-depleted DNA with 90 mM DMSO as antioxidant. Response to single (I-III) and twice (IV) irradiation with 4 Gy and repair kinetics were evaluated using %Tail-DNA. Heterogeneity of DNA damage was determined by calculation of variance of DNA-damage (V) and mean variance (Mvar), mutual comparisons were done by one-way analysis of variance (ANOVA). Results Heterogeneity of initial DNA-damage (I, 0 min repair) increased without histones (II). Absence of histones was balanced by addition of antioxidants (III). Repair reduced heterogeneity of all samples (with and without irradiation). However double irradiation plus repair led to a higher level of heterogeneity distinguishable from single irradiation and repair in intact cells. Increase of mean DNA damage was associated with a similarly elevated variance of DNA damage (r = +0.88). Conclusions Heterogeneity of DNA-damage can be modified by histone level, antioxidant concentration, repair and radiation dose and was positively correlated with DNA damage. Experimental conditions might be optimized by reducing scatter of comet assay data by repair and antioxidants, potentially allowing better discrimination of small differences. Amount of heterogeneity measured by variance might be an additional useful parameter to characterize radiosensitivity. PMID:22520045

Wheat crown rot pathogens Fusarium graminearum and F. pseudograminearum lack specialization.

PubMed

Chakraborty, Sukumar; Obanor, Friday; Westecott, Rhyannyn; Abeywickrama, Krishanthi

2010-10-01

This article reports a lack of pathogenic specialization among Australian Fusarium graminearum and F. pseudograminearum causing crown rot (CR) of wheat using analysis of variance (ANOVA), principal component and biplot analysis, Kendall's coefficient of concordance (W), and κ statistics. Overall, F. pseudograminearum was more aggressive than F. graminearum, supporting earlier delineation of the crown-infecting group as a new species. Although significant wheat line-pathogen isolate interaction in ANOVA suggested putative specialization when seedlings of 60 wheat lines were inoculated with 4 pathogen isolates or 26 wheat lines were inoculated with 10 isolates, significant W and κ showed agreement in rank order of wheat lines, indicating a lack of specialization. The first principal component representing nondifferential aggressiveness explained a large part (up to 65%) of the variation in CR severity. The differential components were small and more pronounced in seedlings than in adult plants. By maximizing variance on the first two principal components, biplots were useful for highlighting the association between isolates and wheat lines. A key finding of this work is that a range of analytical tools are needed to explore pathogenic specialization, and a statistically significant interaction in an ANOVA cannot be taken as conclusive evidence of specialization. With no highly resistant wheat cultivars, Fusarium isolates mostly differ in aggressiveness; however, specialization may appear as more resistant cultivars become widespread.

Ergonomic Evaluation of Dental Professionals as Determined by Rapid Entire Body Assessment Method in 2014

PubMed Central

Jahanimoghadam, Fatemeh; Horri, Azadeh; Hasheminejad, Naimeh; Hashemi Nejad, Naser; Baneshi, Mohammad Reza

2018-01-01

Statement of the Problem: In dentistry, incorrect working posture is the most important cause of musculoskeletal disorders. Purpose: The aim of this research was to evaluate the work postures of general dentists and specialists using rapid entire body assessment (REBA) method. Materials and Method: In this cross-sectional study, work postures were assessed in 90 dentists by employing REBA method. Stratified sampling method was used. Data were analyzed by analysis of variance (ANOVA), Independent t-test and Pearson’s correlation test in SPSS 19. Results: The results showed that work postures of 90% of dentists were at moderate- to high-risk levels. Among the specialists, periodontists, pedodontists and oral and maxillofacial surgeons had the worst body postures. Conclusion: In general, dentists’ working postures need improvement and consequently, a more comprehensive ergonomic training and promotion is required in dentistry curriculum at Universities. PMID:29854890

Factors Influencing Stress, Burnout, and Retention of Secondary Teachers

ERIC Educational Resources Information Center

Fisher, Molly H.

2011-01-01

This study examines the stress, burnout, satisfaction, and preventive coping skills of nearly 400 secondary teachers to determine variables contributing to these major factors influencing teachers. Analysis of Variance (ANOVA) statistics were conducted that found the burnout levels between new and experienced teachers are significantly different,…

Career Development in Language Education Programs

ERIC Educational Resources Information Center

Shawer, Saad Fathy; Alkahtani, Saad Ali

2013-01-01

This study assesses the influence of a two-year language program evaluation on program directors and faculty career development. The study makes use of mixed-paradigms (positivism and qualitative interpretive), mixed-strategies (survey research and qualitative evaluation), one-way analysis of variance (ANOVA) and a post-hoc test of multiple…

New Methods for Estimating Seasonal Potential Climate Predictability

NASA Astrophysics Data System (ADS)

Feng, Xia

This study develops two new statistical approaches to assess the seasonal potential predictability of the observed climate variables. One is the univariate analysis of covariance (ANOCOVA) model, a combination of autoregressive (AR) model and analysis of variance (ANOVA). It has the advantage of taking into account the uncertainty of the estimated parameter due to sampling errors in statistical test, which is often neglected in AR based methods, and accounting for daily autocorrelation that is not considered in traditional ANOVA. In the ANOCOVA model, the seasonal signals arising from external forcing are determined to be identical or not to assess any interannual variability that may exist is potentially predictable. The bootstrap is an attractive alternative method that requires no hypothesis model and is available no matter how mathematically complicated the parameter estimator. This method builds up the empirical distribution of the interannual variance from the resamplings drawn with replacement from the given sample, in which the only predictability in seasonal means arises from the weather noise. These two methods are applied to temperature and water cycle components including precipitation and evaporation, to measure the extent to which the interannual variance of seasonal means exceeds the unpredictable weather noise compared with the previous methods, including Leith-Shukla-Gutzler (LSG), Madden, and Katz. The potential predictability of temperature from ANOCOVA model, bootstrap, LSG and Madden exhibits a pronounced tropical-extratropical contrast with much larger predictability in the tropics dominated by El Nino/Southern Oscillation (ENSO) than in higher latitudes where strong internal variability lowers predictability. Bootstrap tends to display highest predictability of the four methods, ANOCOVA lies in the middle, while LSG and Madden appear to generate lower predictability. Seasonal precipitation from ANOCOVA, bootstrap, and Katz, resembling that for temperature, is more predictable over the tropical regions, and less predictable in extropics. Bootstrap and ANOCOVA are in good agreement with each other, both methods generating larger predictability than Katz. The seasonal predictability of evaporation over land bears considerably similarity with that of temperature using ANOCOVA, bootstrap, LSG and Madden. The remote SST forcing and soil moisture reveal substantial seasonality in their relations with the potentially predictable seasonal signals. For selected regions, either SST or soil moisture or both shows significant relationships with predictable signals, hence providing indirect insight on slowly varying boundary processes involved to enable useful seasonal climate predication. A multivariate analysis of covariance (MANOCOVA) model is established to identify distinctive predictable patterns, which are uncorrelated with each other. Generally speaking, the seasonal predictability from multivariate model is consistent with that from ANOCOVA. Besides unveiling the spatial variability of predictability, MANOCOVA model also reveals the temporal variability of each predictable pattern, which could be linked to the periodic oscillations.

Antinociceptive and anticonvulsant activities of hydroalcoholic extract of Jasminum grandiflorum (jasmine) leaves in experimental animals.

PubMed

Gupta, Rajesh K; Reddy, Pooja S

2013-10-01

Jasminum grandiflorum belongs to the family Oleaceae and is known to have anti-inflammatory, antimicrobial, antioxidant, and antiulcer activities. The present study was undertaken to study its analgesic and anticonvulsant effects in rats and mice. The antinociceptive activity of the hydroalcoholic extract of J. grandiflorum leaves (HEJGL) was studied using tail flick and acetic acid - induced writhing method. Similarly, its anticonvulsant activity was observed by maximal electroshock (MES) method and pentylenetetrazol (PTZ) method. Statistical analysis was performed using one-way analysis of variance (ANOVA) followed by Dunnett's test. At doses of 50, 100, and 200 mg/kg, HEJGL showed significant analgesic and anticonvulsant effects in experimental animals. In view of its analgesic and anticonvulsant activity, the JGL extract can be used in painful conditions as well as in seizure disorders.

Antinociceptive and anticonvulsant activities of hydroalcoholic extract of Jasminum grandiflorum (jasmine) leaves in experimental animals

PubMed Central

Gupta, Rajesh K.; Reddy, Pooja S.

2013-01-01

Jasminum grandiflorum belongs to the family Oleaceae and is known to have anti-inflammatory, antimicrobial, antioxidant, and antiulcer activities. The present study was undertaken to study its analgesic and anticonvulsant effects in rats and mice. The antinociceptive activity of the hydroalcoholic extract of J. grandiflorum leaves (HEJGL) was studied using tail flick and acetic acid – induced writhing method. Similarly, its anticonvulsant activity was observed by maximal electroshock (MES) method and pentylenetetrazol (PTZ) method. Statistical analysis was performed using one-way analysis of variance (ANOVA) followed by Dunnett's test. At doses of 50, 100, and 200 mg/kg, HEJGL showed significant analgesic and anticonvulsant effects in experimental animals. In view of its analgesic and anticonvulsant activity, the JGL extract can be used in painful conditions as well as in seizure disorders. PMID:24174823

Comparative study between different simple methods manipulating ratio spectra for the analysis of alogliptin and metformin co-formulated with highly different concentrations

NASA Astrophysics Data System (ADS)

Zaghary, Wafaa A.; Mowaka, Shereen; Hassan, Mostafa A.; Ayoub, Bassam M.

2017-11-01

Different simple spectrophotometric methods were developed for simultaneous determination of alogliptin and metformin manipulating their ratio spectra with successful application on recently approved combination, Kazano® tablets. Spiking was implemented to detect alogliptin in spite of its low contribution in the pharmaceutical formulation as low quantity in comparison to metformin. Linearity was acceptable over the concentration range of 2.5-25.0 μg/mL and 2.5-15.0 μg/mL for alogliptin and metformin, respectively using derivative ratio, ratio subtraction coupled with extended ratio subtraction and spectrum subtraction coupled with constant multiplication. The optimized methods were compared using one-way analysis of variance (ANOVA) and proved to be accurate for assay of the investigated drugs in their pharmaceutical dosage form.

Geophysical data integration, stochastic simulation and significance analysis of groundwater responses using ANOVA in the Chicot Aquifer system, Louisiana, USA

USGS Publications Warehouse

Rahman, A.; Tsai, F.T.-C.; White, C.D.; Carlson, D.A.; Willson, C.S.

2008-01-01

Data integration is challenging where there are different levels of support between primary and secondary data that need to be correlated in various ways. A geostatistical method is described, which integrates the hydraulic conductivity (K) measurements and electrical resistivity data to better estimate the K distribution in the Upper Chicot Aquifer of southwestern Louisiana, USA. The K measurements were obtained from pumping tests and represent the primary (hard) data. Borehole electrical resistivity data from electrical logs were regarded as the secondary (soft) data, and were used to infer K values through Archie's law and the Kozeny-Carman equation. A pseudo cross-semivariogram was developed to cope with the resistivity data non-collocation. Uncertainties in the auto-semivariograms and pseudo cross-semivariogram were quantified. The groundwater flow model responses by the regionalized and coregionalized models of K were compared using analysis of variance (ANOVA). The results indicate that non-collocated secondary data may improve estimates of K and affect groundwater flow responses of practical interest, including specific capacity and drawdown. ?? Springer-Verlag 2007.

Statistical methods for detecting and comparing periodic data and their application to the nycthemeral rhythm of bodily harm: A population based study

PubMed Central

2010-01-01

Background Animals, including humans, exhibit a variety of biological rhythms. This article describes a method for the detection and simultaneous comparison of multiple nycthemeral rhythms. Methods A statistical method for detecting periodic patterns in time-related data via harmonic regression is described. The method is particularly capable of detecting nycthemeral rhythms in medical data. Additionally a method for simultaneously comparing two or more periodic patterns is described, which derives from the analysis of variance (ANOVA). This method statistically confirms or rejects equality of periodic patterns. Mathematical descriptions of the detecting method and the comparing method are displayed. Results Nycthemeral rhythms of incidents of bodily harm in Middle Franconia are analyzed in order to demonstrate both methods. Every day of the week showed a significant nycthemeral rhythm of bodily harm. These seven patterns of the week were compared to each other revealing only two different nycthemeral rhythms, one for Friday and Saturday and one for the other weekdays. PMID:21059197

Analytic methods for questions pertaining to a randomized pretest, posttest, follow-up design.

PubMed

Rausch, Joseph R; Maxwell, Scott E; Kelley, Ken

2003-09-01

Delineates 5 questions regarding group differences that are likely to be of interest to researchers within the framework of a randomized pretest, posttest, follow-up (PPF) design. These 5 questions are examined from a methodological perspective by comparing and discussing analysis of variance (ANOVA) and analysis of covariance (ANCOVA) methods and briefly discussing hierarchical linear modeling (HLM) for these questions. This article demonstrates that the pretest should be utilized as a covariate in the model rather than as a level of the time factor or as part of the dependent variable within the analysis of group differences. It is also demonstrated that how the posttest and the follow-up are utilized in the analysis of group differences is determined by the specific question asked by the researcher.

A spreadsheet template compatible with Microsoft Excel and iWork Numbers that returns the simultaneous confidence intervals for all pairwise differences between multiple sample means.

PubMed

Brown, Angus M

2010-04-01

The objective of the method described in this paper is to develop a spreadsheet template for the purpose of comparing multiple sample means. An initial analysis of variance (ANOVA) test on the data returns F--the test statistic. If F is larger than the critical F value drawn from the F distribution at the appropriate degrees of freedom, convention dictates rejection of the null hypothesis and allows subsequent multiple comparison testing to determine where the inequalities between the sample means lie. A variety of multiple comparison methods are described that return the 95% confidence intervals for differences between means using an inclusive pairwise comparison of the sample means. 2009 Elsevier Ireland Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tang, Kunkun, E-mail: ktg@illinois.edu; Inria Bordeaux – Sud-Ouest, Team Cardamom, 200 avenue de la Vieille Tour, 33405 Talence; Congedo, Pietro M.

The Polynomial Dimensional Decomposition (PDD) is employed in this work for the global sensitivity analysis and uncertainty quantification (UQ) of stochastic systems subject to a moderate to large number of input random variables. Due to the intimate connection between the PDD and the Analysis of Variance (ANOVA) approaches, PDD is able to provide a simpler and more direct evaluation of the Sobol' sensitivity indices, when compared to the Polynomial Chaos expansion (PC). Unfortunately, the number of PDD terms grows exponentially with respect to the size of the input random vector, which makes the computational cost of standard methods unaffordable formore » real engineering applications. In order to address the problem of the curse of dimensionality, this work proposes essentially variance-based adaptive strategies aiming to build a cheap meta-model (i.e. surrogate model) by employing the sparse PDD approach with its coefficients computed by regression. Three levels of adaptivity are carried out in this paper: 1) the truncated dimensionality for ANOVA component functions, 2) the active dimension technique especially for second- and higher-order parameter interactions, and 3) the stepwise regression approach designed to retain only the most influential polynomials in the PDD expansion. During this adaptive procedure featuring stepwise regressions, the surrogate model representation keeps containing few terms, so that the cost to resolve repeatedly the linear systems of the least-squares regression problem is negligible. The size of the finally obtained sparse PDD representation is much smaller than the one of the full expansion, since only significant terms are eventually retained. Consequently, a much smaller number of calls to the deterministic model is required to compute the final PDD coefficients.« less

Exploring Preferences of Mentoring Activities among Generational Groups of Registered Nurses in Florida

ERIC Educational Resources Information Center

Posey-Goodwin, Patricia Ann

2013-01-01

The purpose of this study was to explore differences in perceptions of mentoring activities from four generations of registered nurses in Florida, using the Alleman Mentoring Activities Questionnaire ® (AMAQ ®). Statistical procedures of analysis of variance (ANOVA) were employed to explore differences among 65 registered nurses in Florida from…

The Effect of Flow Frequency on Internet Addiction to Different Internet Usage Activities

ERIC Educational Resources Information Center

Yang, Hui-Ling; Wu, Wei-Pang

2017-01-01

This study investigated the online flow frequency among college students in regard to different internet activities, and analyzed the effect of flow frequency on internet addiction. This study surveyed 525 undergraduate internet users in Taiwan by using convenience sampling to question participants. In this paper, analysis of variance (ANOVA) was…

The Influence of Ability Grouping on Math Achievement in a Rural Middle School

ERIC Educational Resources Information Center

Pritchard, Robert R.

2012-01-01

The researcher examined the academic performance of low-tracked students (n = 156) using standardized math test scores to determine whether there is a statistically significant difference in achievement depending on academic environment, tracked or nontracked. An analysis of variance (ANOVA) was calculated, using a paired samples t-test for a…

Music Teachers' Computer Anxiety and Self-Efficacy

ERIC Educational Resources Information Center

Kiliç, Deniz Beste Çevik

2015-01-01

This study aims to examine the computer anxiety and self-efficacy of music teachers in terms of different variables. The research is implemented on 124 music teachers. A personal information form and scales of Computer Anxiety and Self Efficacy are implemented on 124 music teachers. Data are analyzed with one way analysis of variance (ANOVA) and…

On statistical analysis of factors affecting anthocyanin extraction from Ixora siamensis

NASA Astrophysics Data System (ADS)

Mat Nor, N. A.; Arof, A. K.

2016-10-01

This study focused on designing an experimental model in order to evaluate the influence of operative extraction parameters employed for anthocyanin extraction from Ixora siamensis on CIE color measurements (a*, b* and color saturation). Extractions were conducted at temperatures of 30, 55 and 80°C, soaking time of 60, 120 and 180 min using acidified methanol solvent with different trifluoroacetic acid (TFA) contents of 0.5, 1.75 and 3% (v/v). The statistical evaluation was performed by running analysis of variance (ANOVA) and regression calculation to investigate the significance of the generated model. Results show that the generated regression models adequately explain the data variation and significantly represented the actual relationship between the independent variables and the responses. Analysis of variance (ANOVA) showed high coefficient determination values (R2) of 0.9687 for a*, 0.9621 for b* and 0.9758 for color saturation, thus ensuring a satisfactory fit of the developed models with the experimental data. Interaction between TFA content and extraction temperature exhibited to the highest significant influence on CIE color parameter.

Efficacy of Miswak toothpaste and mouthwash on cariogenic bacteria

PubMed Central

Al-Dabbagh, Samim A.; Qasim, Huda J.; Al-Derzi, Nadia A.

2016-01-01

Objectives: To evaluate the efficacy of Salvadora persica (Miswak) products on cariogenic bacteria in comparison with ordinary toothpaste. Methods: The study was conducted in Zakho city, Kurdistan region, Iraq during the period from October 2013 to January 2014. A randomized controlled clinical trial of 40 students randomly allocated into 4 groups. They were instructed to use Mismark toothpaste, Miswak mouthwash, and ordinary toothpaste with water or with normal saline. Salivary samples were collected at 3-time intervals: before, immediately after use, and after 2 weeks of use. The effect of each method on Streptococcus mutans and Lactobacilli was evaluated by using caries risk test. Results: One-way repeated measure analysis of variance (ANOVA), one-way ANOVA, and least significant difference tests were used. Miswak wash has a significant reduction effect on both bacteria immediately and after 2 weeks of use. Miswak paste has a similar effect on Lactobacilli, while Streptococcus mutans showed a significant decrease only after 2 weeks of use. Ordinary paste showed a non significant effect on both bacteria at both time intervals; while the addition of normal saline showed a significant effect on both bacteria only after 2 weeks of use. Conclusion: Miswak products, especially mouth wash, were more effective in reducing the growth of cariogenic bacteria than ordinary toothpaste. PMID:27570858

Effect of plasma arc welding variables on fusion zone grain size and hardness of AISI 321 austenitic stainless steel

NASA Astrophysics Data System (ADS)

Kondapalli, S. P.

2017-12-01

In the present work, pulsed current microplasma arc welding is carried out on AISI 321 austenitic stainless steel of 0.3 mm thickness. Peak current, Base current, Pulse rate and Pulse width are chosen as the input variables, whereas grain size and hardness are considered as output responses. Response surface method is adopted by using Box-Behnken Design, and in total 27 experiments are performed. Empirical relation between input and output response is developed using statistical software and analysis of variance (ANOVA) at 95% confidence level to check the adequacy. The main effect and interaction effect of input variables on output response are also studied.

Comparative study between different simple methods manipulating ratio spectra for the analysis of alogliptin and metformin co-formulated with highly different concentrations.

PubMed

Zaghary, Wafaa A; Mowaka, Shereen; Hassan, Mostafa A; Ayoub, Bassam M

2017-11-05

Different simple spectrophotometric methods were developed for simultaneous determination of alogliptin and metformin manipulating their ratio spectra with successful application on recently approved combination, Kazano® tablets. Spiking was implemented to detect alogliptin in spite of its low contribution in the pharmaceutical formulation as low quantity in comparison to metformin. Linearity was acceptable over the concentration range of 2.5-25.0μg/mL and 2.5-15.0μg/mL for alogliptin and metformin, respectively using derivative ratio, ratio subtraction coupled with extended ratio subtraction and spectrum subtraction coupled with constant multiplication. The optimized methods were compared using one-way analysis of variance (ANOVA) and proved to be accurate for assay of the investigated drugs in their pharmaceutical dosage form. Copyright © 2017 Elsevier B.V. All rights reserved.

A Comparison of Analytical and Data Preprocessing Methods for Spectral Fingerprinting

PubMed Central

LUTHRIA, DEVANAND L.; MUKHOPADHYAY, SUDARSAN; LIN, LONG-ZE; HARNLY, JAMES M.

2013-01-01

Spectral fingerprinting, as a method of discriminating between plant cultivars and growing treatments for a common set of broccoli samples, was compared for six analytical instruments. Spectra were acquired for finely powdered solid samples using Fourier transform infrared (FT-IR) and Fourier transform near-infrared (NIR) spectrometry. Spectra were also acquired for unfractionated aqueous methanol extracts of the powders using molecular absorption in the ultraviolet (UV) and visible (VIS) regions and mass spectrometry with negative (MS−) and positive (MS+) ionization. The spectra were analyzed using nested one-way analysis of variance (ANOVA) and principal component analysis (PCA) to statistically evaluate the quality of discrimination. All six methods showed statistically significant differences between the cultivars and treatments. The significance of the statistical tests was improved by the judicious selection of spectral regions (IR and NIR), masses (MS+ and MS−), and derivatives (IR, NIR, UV, and VIS). PMID:21352644

A SAS macro for testing differences among three or more independent groups using Kruskal-Wallis and Nemenyi tests.

PubMed

Liu, Yuewei; Chen, Weihong

2012-02-01

As a nonparametric method, the Kruskal-Wallis test is widely used to compare three or more independent groups when an ordinal or interval level of data is available, especially when the assumptions of analysis of variance (ANOVA) are not met. If the Kruskal-Wallis statistic is statistically significant, Nemenyi test is an alternative method for further pairwise multiple comparisons to locate the source of significance. Unfortunately, most popular statistical packages do not integrate the Nemenyi test, which is not easy to be calculated by hand. We described the theory and applications of the Kruskal-Wallis and Nemenyi tests, and presented a flexible SAS macro to implement the two tests. The SAS macro was demonstrated by two examples from our cohort study in occupational epidemiology. It provides a useful tool for SAS users to test the differences among three or more independent groups using a nonparametric method.

Estimation of Staphylococcus aureus growth parameters from turbidity data: characterization of strain variation and comparison of methods.

PubMed

Lindqvist, R

2006-07-01

Turbidity methods offer possibilities for generating data required for addressing microorganism variability in risk modeling given that the results of these methods correspond to those of viable count methods. The objectives of this study were to identify the best approach for determining growth parameters based on turbidity data and use of a Bioscreen instrument and to characterize variability in growth parameters of 34 Staphylococcus aureus strains of different biotypes isolated from broiler carcasses. Growth parameters were estimated by fitting primary growth models to turbidity growth curves or to detection times of serially diluted cultures either directly or by using an analysis of variance (ANOVA) approach. The maximum specific growth rates in chicken broth at 17 degrees C estimated by time to detection methods were in good agreement with viable count estimates, whereas growth models (exponential and Richards) underestimated growth rates. Time to detection methods were selected for strain characterization. The variation of growth parameters among strains was best described by either the logistic or lognormal distribution, but definitive conclusions require a larger data set. The distribution of the physiological state parameter ranged from 0.01 to 0.92 and was not significantly different from a normal distribution. Strain variability was important, and the coefficient of variation of growth parameters was up to six times larger among strains than within strains. It is suggested to apply a time to detection (ANOVA) approach using turbidity measurements for convenient and accurate estimation of growth parameters. The results emphasize the need to consider implications of strain variability for predictive modeling and risk assessment.

Oily wastewater treatment by ultrafiltration using Taguchi experimental design.

PubMed

Salahi, A; Mohammadi, T

2011-01-01

In this research, results of an experimental investigation on separation of oil from a real oily wastewater using an ultrafiltration (UF) polymeric membrane are presented. In order to enhance the performance of UF in API separator effluent treatment and to get more permeation flux (PF), effects of operating factors on the yield of PF were studied. Five factors at four levels were investigated: trans-membrane pressure (TMP), temperature (T), cross flow velocity (CFV), pH and salt concentration (SC). Taguchi method (L(16) orthogonal array (OA)) was used. Analysis of variance (ANOVA) was applied to calculate sum of square, variance, error variance and contribution percentage of each factor on response. The optimal levels thus determined for the four influential factors were: TMP, 3 bar; T, 40˚C; CFV, 1.0 m/s; SC, 25 g/L and pH, 8. The results showed that CFV and SC are the most and the least effective factors on PF, respectively. Increasing CFV, TMP, T and pH caused the better performance of UF membrane process due to enhancement of driving force and fouling residence. Also, effects of oil concentration (OC) in the wastewater on PF and total organic carbon (TOC) rejection were investigated. Finally, the highest TOC rejection was found to be 85%.

Improving Your Data Transformations: Applying the Box-Cox Transformation

ERIC Educational Resources Information Center

Osborne, Jason W.

2010-01-01

Many of us in the social sciences deal with data that do not conform to assumptions of normality and/or homoscedasticity/homogeneity of variance. Some research has shown that parametric tests (e.g., multiple regression, ANOVA) can be robust to modest violations of these assumptions. Yet the reality is that almost all analyses (even nonparametric…

Implications of Therapist Effects for the Design and Analysis of Comparative Studies of Psychotherapies.

ERIC Educational Resources Information Center

Crits-Christoph, Paul; Mintz, Jim

1991-01-01

Presents reasons therapist should be included as random design factor in nested analysis of (co)variance (AN[C]OVA) design used in psychotherapy research. Reviews studies which indicate majority of investigators ignore issue of effects from incorrect specification of ANOVA design. Presents reanalysis of data from 10 psychotherapy outcome studies…

Wives Domain-Specific "Marriage Work" with Friends and Spouses: Links to Marital Quality

ERIC Educational Resources Information Center

Proulx, Christine M.; Helms, Heather M.; Payne, C. Chris

2004-01-01

This study examined the friendship experiences of 52 wives and mothers, with particular attention given to wives' marriage work (discussions about concerns and problems in the marriage) in 10 domains with friends and spouses. A series of within-subjects repeated measures analyses of variance (ANOVAs) indicated that in all but two domains, wives…

The Impact of Advanced Placement Courses on High School Students Taking the Scholastic Aptitude Test.

ERIC Educational Resources Information Center

Thomas, L. M.; Thomas, Suzanne G.

This obtrusive post-hoc quasi-experimental study investigated Scholastic Assessment Test (SAT) scores of 111 high school students in grades 10 through 12. Fifty-three students were enrolled in at least one Advanced Placement (AP) course at the time of the study. General factorial analysis of variance (ANOVA) tested for significant differences…

What Is Wrong with ANOVA and Multiple Regression? Analyzing Sentence Reading Times with Hierarchical Linear Models

ERIC Educational Resources Information Center

Richter, Tobias

2006-01-01

Most reading time studies using naturalistic texts yield data sets characterized by a multilevel structure: Sentences (sentence level) are nested within persons (person level). In contrast to analysis of variance and multiple regression techniques, hierarchical linear models take the multilevel structure of reading time data into account. They…

Stability of Playfulness across Environmental Settings: A Pilot Study

ERIC Educational Resources Information Center

Rigby, Patricia; Gaik, Sandy

2007-01-01

The Test of Playfulness (ToP) was used in this pilot study to examine the stability of playfulness of 16 children with cerebral palsy (CP), aged 4-8 years, across three environmental settings: home, community, and school. Each videotaped play segment was scored using the ToP. The ANOVA statistic demonstrated a significant variance (p less than…

Biostatistics Series Module 10: Brief Overview of Multivariate Methods.

PubMed

Hazra, Avijit; Gogtay, Nithya

2017-01-01

Multivariate analysis refers to statistical techniques that simultaneously look at three or more variables in relation to the subjects under investigation with the aim of identifying or clarifying the relationships between them. These techniques have been broadly classified as dependence techniques, which explore the relationship between one or more dependent variables and their independent predictors, and interdependence techniques, that make no such distinction but treat all variables equally in a search for underlying relationships. Multiple linear regression models a situation where a single numerical dependent variable is to be predicted from multiple numerical independent variables. Logistic regression is used when the outcome variable is dichotomous in nature. The log-linear technique models count type of data and can be used to analyze cross-tabulations where more than two variables are included. Analysis of covariance is an extension of analysis of variance (ANOVA), in which an additional independent variable of interest, the covariate, is brought into the analysis. It tries to examine whether a difference persists after "controlling" for the effect of the covariate that can impact the numerical dependent variable of interest. Multivariate analysis of variance (MANOVA) is a multivariate extension of ANOVA used when multiple numerical dependent variables have to be incorporated in the analysis. Interdependence techniques are more commonly applied to psychometrics, social sciences and market research. Exploratory factor analysis and principal component analysis are related techniques that seek to extract from a larger number of metric variables, a smaller number of composite factors or components, which are linearly related to the original variables. Cluster analysis aims to identify, in a large number of cases, relatively homogeneous groups called clusters, without prior information about the groups. The calculation intensive nature of multivariate analysis has so far precluded most researchers from using these techniques routinely. The situation is now changing with wider availability, and increasing sophistication of statistical software and researchers should no longer shy away from exploring the applications of multivariate methods to real-life data sets.

Influence of Layer Thickness, Raster Angle, Deformation Temperature and Recovery Temperature on the Shape-Memory Effect of 3D-Printed Polylactic Acid Samples

PubMed Central

Wu, Wenzheng; Ye, Wenli; Wu, Zichao; Geng, Peng; Wang, Yulei; Zhao, Ji

2017-01-01

The success of the 3D-printing process depends upon the proper selection of process parameters. However, the majority of current related studies focus on the influence of process parameters on the mechanical properties of the parts. The influence of process parameters on the shape-memory effect has been little studied. This study used the orthogonal experimental design method to evaluate the influence of the layer thickness H, raster angle θ, deformation temperature Td and recovery temperature Tr on the shape-recovery ratio Rr and maximum shape-recovery rate Vm of 3D-printed polylactic acid (PLA). The order and contribution of every experimental factor on the target index were determined by range analysis and ANOVA, respectively. The experimental results indicated that the recovery temperature exerted the greatest effect with a variance ratio of 416.10, whereas the layer thickness exerted the smallest effect on the shape-recovery ratio with a variance ratio of 4.902. The recovery temperature exerted the most significant effect on the maximum shape-recovery rate with the highest variance ratio of 1049.50, whereas the raster angle exerted the minimum effect with a variance ratio of 27.163. The results showed that the shape-memory effect of 3D-printed PLA parts depended strongly on recovery temperature, and depended more weakly on the deformation temperature and 3D-printing parameters. PMID:28825617

Analysis and optimization of machining parameters of laser cutting for polypropylene composite

NASA Astrophysics Data System (ADS)

Deepa, A.; Padmanabhan, K.; Kuppan, P.

2017-11-01

Present works explains about machining of self-reinforced Polypropylene composite fabricated using hot compaction method. The objective of the experiment is to find optimum machining parameters for Polypropylene (PP). Laser power and Machining speed were the parameters considered in response to tensile test and Flexure test. Taguchi method is used for experimentation. Grey Relational Analysis (GRA) is used for multiple process parameter optimization. ANOVA (Analysis of Variance) is used to find impact for process parameter. Polypropylene has got the great application in various fields like, it is used in the form of foam in model aircraft and other radio-controlled vehicles, thin sheets (∼2-20μm) used as a dielectric, PP is also used in piping system, it is also been used in hernia and pelvic organ repair or protect new herrnis in the same location.

Chemometric simultaneous determination of Sofosbuvir and Ledipasvir in pharmaceutical dosage form

NASA Astrophysics Data System (ADS)

Khalili, Mahsa; Sohrabi, Mahmoud Reza; Mirzabeygi, Vahid; Torabi Ziaratgahi, Nahid

2018-04-01

Partial least squares (PLS), different families of continuous wavelet transform (CWT), and first derivative spectrophotometry (DS) techniques were studied for quantification of Sofosbuvir (SFB) and Ledipasvir (LDV) simultaneously without separation step. The components were dissolved in Acetonitrile and the spectral behaviors were evaluated in the range of 200 to 400 nm. The ultraviolet (UV) absorbance of LDV exhibits no interferences between 300 and 400 nm and it was decided to predict the LDV amount through the classic spectrophotometry (CS) method in this spectral region as well. Data matrix of concentrations and calibrated models were developed, and then by applying a validation set the accuracy and precision of each model were studied. Actual concentrations versus predicted concentrations plotted and good correlation coefficients by each method resulted. Pharmaceutical dosage form was quantified by developed methods and the results were compared with the High Performance Liquid Chromatography (HPLC) reference method. Analysis Of Variance (ANOVA) in 95% confidence level showed no significant differences among methods.

Waddell non-organic signs: new evidence suggests somatic amplification among outpatient chronic pain patients.

PubMed

Wygant, Dustin B; Arbisi, Paul A; Bianchini, Kevin J; Umlauf, Robert L

2017-04-01

Waddell et al. identified a set of eight non-organic signs in 1980. There has been controversy about their meaning, particularly with respect to their use as validity indicators. The current study examined the Waddell signs in relation to measures of somatic amplification or over-reporting in a sample of outpatient chronic pain patients. We examined the degree to which these signs were associated with measures of over-reporting. This study examined scores on the Waddell signs in relation to over-reporting indicators in an outpatient chronic pain sample. We examined 230 chronic pain patients treated at a multidisciplinary pain clinic. The majority of these patients presented with primary back or spinal injuries. The outcome measures used in the study were Waddell signs, Modified Somatic Perception Questionnaire, Pain Disability Index, and the Minnesota Multiphasic Personality Inventory-2 Restructured Form. We examined Waddell signs using multivariate analysis of variance (MANOVA) and analysis of variance (ANOVA), receiver operating characteristic analysis, classification accuracy, and relative risk ratios. Multivariate analysis of variance and ANOVA showed a significant association between Waddell signs and somatic amplification. Classification analyses showed increased odds of somatic amplification at a Waddell score of 2 or 3. Our results found significant evidence of an association between Waddell signs and somatic over-reporting. Elevated scores on the Waddell signs (particularly scores higher than 2 and 3) were associated with increased odds of exhibiting somatic over-reporting. Copyright © 2016 Elsevier Inc. All rights reserved.

Visual classification of very fine-grained sediments: Evaluation through univariate and multivariate statistics

USGS Publications Warehouse

Hohn, M. Ed; Nuhfer, E.B.; Vinopal, R.J.; Klanderman, D.S.

1980-01-01

Classifying very fine-grained rocks through fabric elements provides information about depositional environments, but is subject to the biases of visual taxonomy. To evaluate the statistical significance of an empirical classification of very fine-grained rocks, samples from Devonian shales in four cored wells in West Virginia and Virginia were measured for 15 variables: quartz, illite, pyrite and expandable clays determined by X-ray diffraction; total sulfur, organic content, inorganic carbon, matrix density, bulk density, porosity, silt, as well as density, sonic travel time, resistivity, and ??-ray response measured from well logs. The four lithologic types comprised: (1) sharply banded shale, (2) thinly laminated shale, (3) lenticularly laminated shale, and (4) nonbanded shale. Univariate and multivariate analyses of variance showed that the lithologic classification reflects significant differences for the variables measured, difference that can be detected independently of stratigraphic effects. Little-known statistical methods found useful in this work included: the multivariate analysis of variance with more than one effect, simultaneous plotting of samples and variables on canonical variates, and the use of parametric ANOVA and MANOVA on ranked data. ?? 1980 Plenum Publishing Corporation.

LED Curing Lights and Temperature Changes in Different Tooth Sites

PubMed Central

Armellin, E.; Bovesecchi, G.; Coppa, P.; Pasquantonio, G.; Cerroni, L.

2016-01-01

Objectives. The aim of this in vitro study was to assess thermal changes on tooth tissues during light exposure using two different LED curing units. The hypothesis was that no temperature increase could be detected within the dental pulp during polymerization irrespective of the use of a composite resin or a light-curing unit. Methods. Caries-free human first molars were selected, pulp residues were removed after root resection, and four calibrated type-J thermocouples were positioned. Two LED lamps were tested; temperature measurements were made on intact teeth and on the same tooth during curing of composite restorations. The data was analyzed by one-way analysis of variance (ANOVA), Wilcoxon test, Kruskal-Wallis test, and Pearson's χ 2. After ANOVA, the Bonferroni multiple comparison test was performed. Results. Polymerization data analysis showed that in the pulp chamber temperature increase was higher than that without resin. Starlight PRO, in the same condition of Valo lamp, showed a lower temperature increase in pre- and intrapolymerization. A control group (without composite resin) was evaluated. Significance. Temperature increase during resin curing is a function of the rate of polymerization, due to the exothermic polymerization reaction, the energy from the light unit, and time of exposure. PMID:27195282

Influence of translucence/opacity and shade in the flexural strength of lithium disilicate ceramics

PubMed Central

Santos, Mila Oliveira; do Amaral, Flávia Lucisano Botelho; França, Fabiana Mantovani Gomes; Basting, Roberta Tarkany

2015-01-01

Background: Lithium disilicate ceramic system consists of glass ceramic ingots with different grades of translucence which may influence its flexural strength. Aims: To assess the three-point flexural strength of the different lithium disilicate-based ceramic ingots (IPS e.max Press/Ivoclar Vivadent) with different levels of translucence and shade. Materials and Methods: Six groups of ceramic ingots were selected to represent different levels of translucence and shade (HTA1, HTBL2, LTA2, LTB2, MO2, and HO). They measured 25 mm × 5 mm × 2 mm (n = 10), according to ISO 6872 specifications, and tested on a universal test machine (EMIC). Statistical Analysis Used: A one-way analysis of variance (ANOVA) was used (α = 0.05). Results: The results (in MPa) were: HTA1 = 392.98; HTBL2 = 390.74; LTA2 = 390.46; LTB2 = 389.92; MO2 = 390.43; HO = 391.96. ANOVA showed no significant difference among groups (P = 0.1528). Conclusions: Different levels of translucence, opacity and shade of ingots did not affect their mechanical strength, and the use of these ceramics should be guided by the esthetic demands of each clinical situation. PMID:26430304

Synthesis, characterization and photocatalytic activity of neodymium carbonate and neodymium oxide nanoparticles

NASA Astrophysics Data System (ADS)

Pourmortazavi, Seied Mahdi; Rahimi-Nasrabadi, Mehdi; Aghazadeh, Mustafa; Ganjali, Mohammad Reza; Karimi, Meisam Sadeghpour; Norouzi, Parviz

2017-12-01

This work focuses on the application of an orthogonal array design to the optimization of the facile direct carbonization reaction for the synthesis of neodymium carbonate nanoparticles, were the product particles are prepared based on the direct precipitation of their ingredients. To optimize the method the influences of the major operating conditions on the dimensions of the neodymium carbonate particles were quantitatively evaluated through the analysis of variance (ANOVA). It was observed that the crystalls of the carbonate salt can be synthesized by controlling neodymium concentration and flow rate, as well as reactor temperature. Based on the results of ANOVA, 0.03 M, 2.5 mL min-1 and 30 °C are the optimum values for the above-mentioend parameters and controlling the parameters at these values yields nanoparticles with the sizes of about of 31 ± 2 nm. The product of this former stage was next used as the feed for a thermal decomposition procedure which yielding neodymium oxide nanoparticles. The products were studied through X-ray diffraction (XRD), SEM, TEM, FT-IR and thermal analysis techniques. In addition, the photocatalytic activity of dyspersium carbonate and dyspersium oxide nanoparticles were investigated using degradation of methyl orange (MO) under ultraviolet light.

LED Curing Lights and Temperature Changes in Different Tooth Sites.

PubMed

Armellin, E; Bovesecchi, G; Coppa, P; Pasquantonio, G; Cerroni, L

2016-01-01

Objectives. The aim of this in vitro study was to assess thermal changes on tooth tissues during light exposure using two different LED curing units. The hypothesis was that no temperature increase could be detected within the dental pulp during polymerization irrespective of the use of a composite resin or a light-curing unit. Methods. Caries-free human first molars were selected, pulp residues were removed after root resection, and four calibrated type-J thermocouples were positioned. Two LED lamps were tested; temperature measurements were made on intact teeth and on the same tooth during curing of composite restorations. The data was analyzed by one-way analysis of variance (ANOVA), Wilcoxon test, Kruskal-Wallis test, and Pearson's χ (2). After ANOVA, the Bonferroni multiple comparison test was performed. Results. Polymerization data analysis showed that in the pulp chamber temperature increase was higher than that without resin. Starlight PRO, in the same condition of Valo lamp, showed a lower temperature increase in pre- and intrapolymerization. A control group (without composite resin) was evaluated. Significance. Temperature increase during resin curing is a function of the rate of polymerization, due to the exothermic polymerization reaction, the energy from the light unit, and time of exposure.

Rapid development of xylanase assay conditions using Taguchi methodology.

PubMed

Prasad Uday, Uma Shankar; Bandyopadhyay, Tarun Kanti; Bhunia, Biswanath

2016-11-01

The present investigation is mainly concerned with the rapid development of extracellular xylanase assay conditions by using Taguchi methodology. The extracellular xylanase was produced from Aspergillus niger (KP874102.1), a new strain isolated from a soil sample of the Baramura forest, Tripura West, India. Four physical parameters including temperature, pH, buffer concentration and incubation time were considered as key factors for xylanase activity and were optimized using Taguchi robust design methodology for enhanced xylanase activity. The main effect, interaction effects and optimal levels of the process factors were determined using signal-to-noise (S/N) ratio. The Taguchi method recommends the use of S/N ratio to measure quality characteristics. Based on analysis of the S/N ratio, optimal levels of the process factors were determined. Analysis of variance (ANOVA) was performed to evaluate statistically significant process factors. ANOVA results showed that temperature contributed the maximum impact (62.58%) on xylanase activity, followed by pH (22.69%), buffer concentration (9.55%) and incubation time (5.16%). Predicted results showed that enhanced xylanase activity (81.47%) can be achieved with pH 2, temperature 50°C, buffer concentration 50 Mm and incubation time 10 min.

Eta- and Partial Eta-Squared in L2 Research: A Cautionary Review and Guide to More Appropriate Usage

ERIC Educational Resources Information Center

Norouzian, Reza; Plonsky, Luke

2018-01-01

Eta-squared (?[superscript 2]) and partial eta-squared (?[subscript p][superscript 2]) are effect sizes that express the amount of variance accounted for by one or more independent variables. These indices are generally used in conjunction with ANOVA, the most commonly used statistical test in second language (L2) research (Plonsky, 2013).…

Domestic Division of Labor and Its Relationship to Sex Role Orientation and Work Attitudes in Working Couples.

ERIC Educational Resources Information Center

Gunter, Nancy C.; Gunter, B. G.

This study examined the relationship of gender, sex role orientation, and work attitudes to the domestic division of labor in 141 working couples. Couples completed the Bem Sex Role Inventory and a questionnaire on the performance of household tasks. Analysis of variance (ANOVA) confirmed that working women performed a disproportionately larger…

Optimal Design in Three-Level Block Randomized Designs with Two Levels of Nesting: An ANOVA Framework with Random Effects

ERIC Educational Resources Information Center

Konstantopoulos, Spyros

2013-01-01

Large-scale experiments that involve nested structures may assign treatment conditions either to subgroups such as classrooms or to individuals such as students within subgroups. Key aspects of the design of such experiments include knowledge of the variance structure in higher levels and the sample sizes necessary to reach sufficient power to…

Analysis of half diallel mating designs I: a practical analysis procedure for ANOVA approximation.

Treesearch

G.R. Johnson; J.N. King

1998-01-01

Procedures to analyze half-diallel mating designs using the SAS statistical package are presented. The procedure requires two runs of PROC and VARCOMP and results in estimates of additive and non-additive genetic variation. The procedures described can be modified to work on most statistical software packages which can compute variance component estimates. The...

Factor analysis of the catatonia rating scale and catatonic symptom distribution across four diagnostic groups.

PubMed

Krüger, Stephanie; Bagby, R Michael; Höffler, Jürgen; Bräunig, Peter

2003-01-01

Catatonia is a frequent psychomotor syndrome, which has received increasing recognition over the last decade. The assessment of the catatonic syndrome requires systematic rating scales that cover the complex spectrum of catatonic motor signs and behaviors. The Catatonia Rating Scale (CRS) is such an instrument, which has been validated and which has undergone extensive reliability testing. In the present study, to further validate the CRS, the items composing this scale were submitted to principal components factor extraction followed by a varimax rotation. An analysis of variance (ANOVA) was performed to assess group differences on the extracted factors in patients with schizophrenia, pure mania, mixed mania, and major depression (N=165). Four factors were extracted, which accounted for 71.5% of the variance. The factors corresponded to the clinical syndromes of (1) catatonic excitement, (2) abnormal involuntary movements/mannerisms, (3) disturbance of volition/catalepsy, and (4) catatonic inhibition. The ANOVA revealed that each of the groups showed a distinctive catatonic symptom pattern and that the overlap between diagnostic groups was minimal. We conclude that this four-factor symptom structure of catatonia challenges the current conceptualization, which proposes only two symptom subtypes.

Predicting Presynaptic and Postsynaptic Neurotoxins by Developing Feature Selection Technique

PubMed Central

Yang, Yunchun; Zhang, Chunmei; Chen, Rong; Huang, Po

2017-01-01

Presynaptic and postsynaptic neurotoxins are proteins which act at the presynaptic and postsynaptic membrane. Correctly predicting presynaptic and postsynaptic neurotoxins will provide important clues for drug-target discovery and drug design. In this study, we developed a theoretical method to discriminate presynaptic neurotoxins from postsynaptic neurotoxins. A strict and objective benchmark dataset was constructed to train and test our proposed model. The dipeptide composition was used to formulate neurotoxin samples. The analysis of variance (ANOVA) was proposed to find out the optimal feature set which can produce the maximum accuracy. In the jackknife cross-validation test, the overall accuracy of 94.9% was achieved. We believe that the proposed model will provide important information to study neurotoxins. PMID:28303250

MRI-determined liver proton density fat fraction, with MRS validation: Comparison of regions of interest sampling methods in patients with type 2 diabetes.

PubMed

Vu, Kim-Nhien; Gilbert, Guillaume; Chalut, Marianne; Chagnon, Miguel; Chartrand, Gabriel; Tang, An

2016-05-01

To assess the agreement between published magnetic resonance imaging (MRI)-based regions of interest (ROI) sampling methods using liver mean proton density fat fraction (PDFF) as the reference standard. This retrospective, internal review board-approved study was conducted in 35 patients with type 2 diabetes. Liver PDFF was measured by magnetic resonance spectroscopy (MRS) using a stimulated-echo acquisition mode sequence and MRI using a multiecho spoiled gradient-recalled echo sequence at 3.0T. ROI sampling methods reported in the literature were reproduced and liver mean PDFF obtained by whole-liver segmentation was used as the reference standard. Intraclass correlation coefficients (ICCs), Bland-Altman analysis, repeated-measures analysis of variance (ANOVA), and paired t-tests were performed. ICC between MRS and MRI-PDFF was 0.916. Bland-Altman analysis showed excellent intermethod agreement with a bias of -1.5 ± 2.8%. The repeated-measures ANOVA found no systematic variation of PDFF among the nine liver segments. The correlation between liver mean PDFF and ROI sampling methods was very good to excellent (0.873 to 0.975). Paired t-tests revealed significant differences (P < 0.05) with ROI sampling methods that exclusively or predominantly sampled the right lobe. Significant correlations with mean PDFF were found with sampling methods that included higher number of segments, total area equal or larger than 5 cm(2) , or sampled both lobes (P = 0.001, 0.023, and 0.002, respectively). MRI-PDFF quantification methods should sample each liver segment in both lobes and include a total surface area equal or larger than 5 cm(2) to provide a close estimate of the liver mean PDFF. © 2015 Wiley Periodicals, Inc.

3D facial landmarks: Inter-operator variability of manual annotation

PubMed Central

2014-01-01

Background Manual annotation of landmarks is a known source of variance, which exist in all fields of medical imaging, influencing the accuracy and interpretation of the results. However, the variability of human facial landmarks is only sparsely addressed in the current literature as opposed to e.g. the research fields of orthodontics and cephalometrics. We present a full facial 3D annotation procedure and a sparse set of manually annotated landmarks, in effort to reduce operator time and minimize the variance. Method Facial scans from 36 voluntary unrelated blood donors from the Danish Blood Donor Study was randomly chosen. Six operators twice manually annotated 73 anatomical and pseudo-landmarks, using a three-step scheme producing a dense point correspondence map. We analyzed both the intra- and inter-operator variability, using mixed-model ANOVA. We then compared four sparse sets of landmarks in order to construct a dense correspondence map of the 3D scans with a minimum point variance. Results The anatomical landmarks of the eye were associated with the lowest variance, particularly the center of the pupils. Whereas points of the jaw and eyebrows have the highest variation. We see marginal variability in regards to intra-operator and portraits. Using a sparse set of landmarks (n=14), that capture the whole face, the dense point mean variance was reduced from 1.92 to 0.54 mm. Conclusion The inter-operator variability was primarily associated with particular landmarks, where more leniently landmarks had the highest variability. The variables embedded in the portray and the reliability of a trained operator did only have marginal influence on the variability. Further, using 14 of the annotated landmarks we were able to reduced the variability and create a dense correspondences mesh to capture all facial features. PMID:25306436

Effect of clearfil protect bond and transbond plus self-etch primer on shear bond strength of orthodontic brackets

PubMed Central

Raji, S. Hamid; Ghorbanipour, Reza; Majdzade, Fateme

2011-01-01

Background: The aim of this study was to evaluate the shear bond strength of an antimicrobial and fluoride-releasing self-etch primer (clearfil protect bond) and compare it with transbond plus self-etch primer and conventional acid etching and priming system. Materials and Methods: Forty-eight extracted human premolars were divided randomly to three groups. In group 1, the teeth were bonded with conventional acid etching and priming method. In group 2, the teeth were bonded with clearfil protect bond self-etch primer, and transbond plus self-etch primer was used to bond the teeth in group 3. The samples were stored in 37°C distilled water and thermocycled. Then, the SBS of the sample was evaluated with Zwick testing machine. Descriptive statistics and the analysis of variances (ANOVA) and Tukey's test and Kruskal-Wallis were used to analyze the data. Results: The results of the ANOVA showed that the mean of group 3 was significantly lower than that of other groups. Most of the sample showed a pattern of failure within the adhesive resin. Conclusion: The shear bond strength of clearfil protect bond and transbond plus self-etch primer was enough for bonding the orthodontic brackets. The mode of failure of bonded brackets with these two self-etch primers is safe for enamel. PMID:23372605

Systematic methods for knowledge acquisition and expert system development

NASA Technical Reports Server (NTRS)

Belkin, Brenda L.; Stengel, Robert F.

1991-01-01

Nine cooperating rule-based systems, collectively called AUTOCREW which were designed to automate functions and decisions associated with a combat aircraft's subsystems, are discussed. The organization of tasks within each system is described; performance metrics were developed to evaluate the workload of each rule base and to assess the cooperation between the rule bases. Simulation and comparative workload results for two mission scenarios are given. The scenarios are inbound surface-to-air-missile attack on the aircraft and pilot incapacitation. The methodology used to develop the AUTOCREW knowledge bases is summarized. Issues involved in designing the navigation sensor selection expert in AUTOCREW's NAVIGATOR knowledge base are discussed in detail. The performance of seven navigation systems aiding a medium-accuracy INS was investigated using Kalman filter covariance analyses. A navigation sensor management (NSM) expert system was formulated from covariance simulation data using the analysis of variance (ANOVA) method and the ID3 algorithm. ANOVA results show that statistically different position accuracies are obtained when different navaids are used, the number of navaids aiding the INS is varied, the aircraft's trajectory is varied, and the performance history is varied. The ID3 algorithm determines the NSM expert's classification rules in the form of decision trees. The performance of these decision trees was assessed on two arbitrary trajectories, and the results demonstrate that the NSM expert adapts to new situations and provides reasonable estimates of the expected hybrid performance.

Validation of a three-dimensional body scanner for body composition measures.

PubMed

Harbin, Michelle M; Kasak, Alexander; Ostrem, Joseph D; Dengel, Donald R

2017-12-29

The accuracy of an infrared three-dimensional (3D) body scanner in determining body composition was compared against hydrostatic weighing (HW), bioelectrical impedance analysis (BIA), and anthropometry. A total of 265 adults (119 males; age = 22.1 ± 2.5 years; body mass index = 24.5 ± 3.9 kg/m 2 ) had their body fat percent (BF%) estimated from 3D scanning, HW, BIA, skinfolds, and girths. A repeated measures analysis of variance (ANOVA) indicated significant differences among methods (p < 0.001). Multivariate ANOVA indicated a significant main effect of sex and method (p < 0.001), with a non-significant interaction (p = 0.101). Bonferroni post-hoc comparisons identified that BF% from 3D scanning (18.1 ± 7.8%) was significantly less than HW (22.8 ± 8.5%, p < 0.001), BIA (20.1 ± 9.1%, p < 0.001), skinfolds (19.7 ± 9.7%, p < 0.001), and girths (21.2 ± 10.4%, p < 0.001). The 3D scanner decreased in precision with increasing adiposity, potentially resulting from inconsistences in the 3D scanner's analysis algorithm. A correction factor within the algorithm is required before infrared 3D scanning can be considered valid in measuring BF%.

Systematic methods for knowledge acquisition and expert system development

NASA Technical Reports Server (NTRS)

Belkin, Brenda L.; Stengel, Robert F.

1991-01-01

Nine cooperating rule-based systems, collectively called AUTOCREW, were designed to automate functions and decisions associated with a combat aircraft's subsystem. The organization of tasks within each system is described; performance metrics were developed to evaluate the workload of each rule base, and to assess the cooperation between the rule-bases. Each AUTOCREW subsystem is composed of several expert systems that perform specific tasks. AUTOCREW's NAVIGATOR was analyzed in detail to understand the difficulties involved in designing the system and to identify tools and methodologies that ease development. The NAVIGATOR determines optimal navigation strategies from a set of available sensors. A Navigation Sensor Management (NSM) expert system was systematically designed from Kalman filter covariance data; four ground-based, a satellite-based, and two on-board INS-aiding sensors were modeled and simulated to aid an INS. The NSM Expert was developed using the Analysis of Variance (ANOVA) and the ID3 algorithm. Navigation strategy selection is based on an RSS position error decision metric, which is computed from the covariance data. Results show that the NSM Expert predicts position error correctly between 45 and 100 percent of the time for a specified navaid configuration and aircraft trajectory. The NSM Expert adapts to new situations, and provides reasonable estimates of hybrid performance. The systematic nature of the ANOVA/ID3 method makes it broadly applicable to expert system design when experimental or simulation data is available.

Predicting cancerlectins by the optimal g-gap dipeptides

NASA Astrophysics Data System (ADS)

Lin, Hao; Liu, Wei-Xin; He, Jiao; Liu, Xin-Hui; Ding, Hui; Chen, Wei

2015-12-01

The cancerlectin plays a key role in the process of tumor cell differentiation. Thus, to fully understand the function of cancerlectin is significant because it sheds light on the future direction for the cancer therapy. However, the traditional wet-experimental methods were money- and time-consuming. It is highly desirable to develop an effective and efficient computational tool to identify cancerlectins. In this study, we developed a sequence-based method to discriminate between cancerlectins and non-cancerlectins. The analysis of variance (ANOVA) was used to choose the optimal feature set derived from the g-gap dipeptide composition. The jackknife cross-validated results showed that the proposed method achieved the accuracy of 75.19%, which is superior to other published methods. For the convenience of other researchers, an online web-server CaLecPred was established and can be freely accessed from the website http://lin.uestc.edu.cn/server/CalecPred. We believe that the CaLecPred is a powerful tool to study cancerlectins and to guide the related experimental validations.

Comparing the efficacy of mydriatic cocktail-soaked sponge and conventional pupil dilation in patients using tamsulosin – a randomized controlled trial

PubMed Central

2013-01-01

Background A strong association exists between the use of tamsulosin and the occurance of intraoperative floppy iris syndrome. Several methods were advocated to overcome the progressive intraopertive miosis. Our purpose was to investigate the effect of a mydriatic-cocktail soaked cellulose sponge on perioperative pupil diameter in tamsulosin-treated patients undergoing elective cataract surgery. Methods Patients using tamsulosin were dilated either with mydriatic-cocktail soaked sponge (group 1) or with conventional eyedrop regimen (group 2). Control patients not taking any α1 adrenergic receptor inhibtors were also dilated with mydriatic sponge (group 3). In all groups oxybuprocain 0.4%, cocain 4%, tropicamide 1%, phenylephrine 10%, diclophenac 0.1% along with chloramphenicol 0.5% were used preoperatively. Pupil diameter (mm) was measured preoperatively, after nucleus delivery, and before IOL implantation. Adverse effects associated with the use of sponge, minor and major intraoperative complications, the use of iris retractors and operation time were recorded. Differences in general between groups were analyzed with a one way analysis of variance (ANOVA); differences between groups in proportions were assessed by Fisher’s exact test. Results Mean pupil diameter (mm) was preopertively: 7.52 ± 1.21, 7.30 ± 1.55 and 7.99 ± 0.96 (ANOVA: p = 0.079); after nucleus delivery: 6 ± 1.20, 6.29 ± 1.12 and 6.52 ± 0.81 (ANOVA: p = 0.123); before IOL implantation: 5.46 ± 1.06, 5.83 ± 1.09 and 6.17 ± 0.89 (ANOVA: p = 0.0291). No adverse effect related to sponge use was detected. Frequency of minor complications, and iris hook use was similar in the two tamsulosin treated group. Operation time did not differ significantly in the three groups. Conclusion We have found that using a mydriatic cocktail-soaked wick – an alternative way to achieve intraoperative mydriasis for cataract surgery – was as effective and safe as the conventional repeated eyedrops regiment for tamsulosin treated patients. Trial registration Current Controlled Trials ISRCTN37834752 PMID:24359572

Use of multispectral Ikonos imagery for discriminating between conventional and conservation agricultural tillage practices

USGS Publications Warehouse

Vina, Andres; Peters, Albert J.; Ji, Lei

2003-01-01

There is a global concern about the increase in atmospheric concentrations of greenhouse gases. One method being discussed to encourage greenhouse gas mitigation efforts is based on a trading system whereby carbon emitters can buy effective mitigation efforts from farmers implementing conservation tillage practices. These practices sequester carbon from the atmosphere, and such a trading system would require a low-cost and accurate method of verification. Remote sensing technology can offer such a verification technique. This paper is focused on the use of standard image processing procedures applied to a multispectral Ikonos image, to determine whether it is possible to validate that farmers have complied with agreements to implement conservation tillage practices. A principal component analysis (PCA) was performed in order to isolate image variance in cropped fields. Analyses of variance (ANOVA) statistical procedures were used to evaluate the capability of each Ikonos band and each principal component to discriminate between conventional and conservation tillage practices. A logistic regression model was implemented on the principal component most effective in discriminating between conventional and conservation tillage, in order to produce a map of the probability of conventional tillage. The Ikonos imagery, in combination with ground-reference information, proved to be a useful tool for verification of conservation tillage practices.

Bias and robustness of uncertainty components estimates in transient climate projections

NASA Astrophysics Data System (ADS)

Hingray, Benoit; Blanchet, Juliette; Jean-Philippe, Vidal

2016-04-01

A critical issue in climate change studies is the estimation of uncertainties in projections along with the contribution of the different uncertainty sources, including scenario uncertainty, the different components of model uncertainty and internal variability. Quantifying the different uncertainty sources faces actually different problems. For instance and for the sake of simplicity, an estimate of model uncertainty is classically obtained from the empirical variance of the climate responses obtained for the different modeling chains. These estimates are however biased. Another difficulty arises from the limited number of members that are classically available for most modeling chains. In this case, the climate response of one given chain and the effect of its internal variability may be actually difficult if not impossible to separate. The estimate of scenario uncertainty, model uncertainty and internal variability components are thus likely to be not really robust. We explore the importance of the bias and the robustness of the estimates for two classical Analysis of Variance (ANOVA) approaches: a Single Time approach (STANOVA), based on the only data available for the considered projection lead time and a time series based approach (QEANOVA), which assumes quasi-ergodicity of climate outputs over the whole available climate simulation period (Hingray and Saïd, 2014). We explore both issues for a simple but classical configuration where uncertainties in projections are composed of two single sources: model uncertainty and internal climate variability. The bias in model uncertainty estimates is explored from theoretical expressions of unbiased estimators developed for both ANOVA approaches. The robustness of uncertainty estimates is explored for multiple synthetic ensembles of time series projections generated with MonteCarlo simulations. For both ANOVA approaches, when the empirical variance of climate responses is used to estimate model uncertainty, the bias is always positive. It can be especially high with STANOVA. In the most critical configurations, when the number of members available for each modeling chain is small (< 3) and when internal variability explains most of total uncertainty variance (75% or more), the overestimation is higher than 100% of the true model uncertainty variance. The bias can be considerably reduced with a time series ANOVA approach, owing to the multiple time steps accounted for. The longer the transient time period used for the analysis, the larger the reduction. When a quasi-ergodic ANOVA approach is applied to decadal data for the whole 1980-2100 period, the bias is reduced by a factor 2.5 to 20 depending on the projection lead time. In all cases, the bias is likely to be not negligible for a large number of climate impact studies resulting in a likely large overestimation of the contribution of model uncertainty to total variance. For both approaches, the robustness of all uncertainty estimates is higher when more members are available, when internal variability is smaller and/or the response-to-uncertainty ratio is higher. QEANOVA estimates are much more robust than STANOVA ones: QEANOVA simulated confidence intervals are roughly 3 to 5 times smaller than STANOVA ones. Excepted for STANOVA when less than 3 members is available, the robustness is rather high for total uncertainty and moderate for internal variability estimates. For model uncertainty or response-to-uncertainty ratio estimates, the robustness is conversely low for QEANOVA to very low for STANOVA. In the most critical configurations (small number of member, large internal variability), large over- or underestimation of uncertainty components is very thus likely. To propose relevant uncertainty analyses and avoid misleading interpretations, estimates of uncertainty components should be therefore bias corrected and ideally come with estimates of their robustness. This work is part of the COMPLEX Project (European Collaborative Project FP7-ENV-2012 number: 308601; http://www.complex.ac.uk/). Hingray, B., Saïd, M., 2014. Partitioning internal variability and model uncertainty components in a multimodel multireplicate ensemble of climate projections. J.Climate. doi:10.1175/JCLI-D-13-00629.1 Hingray, B., Blanchet, J. (revision) Unbiased estimators for uncertainty components in transient climate projections. J. Climate Hingray, B., Blanchet, J., Vidal, J.P. (revision) Robustness of uncertainty components estimates in climate projections. J.Climate

Gross regional domestic product estimation: Application of two-way unbalanced panel data models to economic growth in East Nusa Tenggara province

NASA Astrophysics Data System (ADS)

Wibowo, Wahyu; Sinu, Elisabeth B.; Setiawan

2017-03-01

The condition of East Nusa Tenggara Province which recently developed new districts can affect the number of information or data collected become unbalanced. One of the consequences of ignoring the data incompleteness is the estimator become not valid. Therefore, the analysis of unbalanced panel data is very crucial.The aim of this paper is to find the estimation of Gross Regional Domestic Product in East Nusa Tenggara Province using unbalanced panel data regression model for two-way error component which assume random effect model (REM). In this research, we employ Feasible Generalized Least Squares (FGLS) as regression coefficients estimation method. Since variance of the model is unknown, ANOVA method is considered to obtain the variance components in order to construct the variance-covariance matrix. The data used in this research is secondary data taken from Central Bureau of Statistics of East Nusa Tenggara Province in 21 districts period 2004-2013. The predictors are the number of labor over 15 years old (X1), electrification ratios (X2), and local revenues (X3) while Gross Regional Domestic Product based on constant price 2000 is the response (Y). The FGLS estimation result shows that the value of R2 is 80,539% and all the predictors chosen are significantly affect (α = 5%) the Gross Regional Domestic Product in all district of East Nusa Tenggara Province. Those variables are the number of labor over 15 years old (X1), electrification ratios (X2), and local revenues (X3) with 0,22986, 0,090476, and 0,14749 of elasticities, respectively.

Modeling and optimization of joint quality for laser transmission joint of thermoplastic using an artificial neural network and a genetic algorithm

NASA Astrophysics Data System (ADS)

Wang, Xiao; Zhang, Cheng; Li, Pin; Wang, Kai; Hu, Yang; Zhang, Peng; Liu, Huixia

2012-11-01

A central composite rotatable experimental design(CCRD) is conducted to design experiments for laser transmission joining of thermoplastic-Polycarbonate (PC). The artificial neural network was used to establish the relationships between laser transmission joining process parameters (the laser power, velocity, clamp pressure, scanning number) and joint strength and joint seam width. The developed mathematical models are tested by analysis of variance (ANOVA) method to check their adequacy and the effects of process parameters on the responses and the interaction effects of key process parameters on the quality are analyzed and discussed. Finally, the desirability function coupled with genetic algorithm is used to carry out the optimization of the joint strength and joint width. The results show that the predicted results of the optimization are in good agreement with the experimental results, so this study provides an effective method to enhance the joint quality.

Parameter optimization of flux-aided backing-submerged arc welding by using Taguchi method

NASA Astrophysics Data System (ADS)

Pu, Juan; Yu, Shengfu; Li, Yuanyuan

2017-07-01

Flux-aided backing-submerged arc welding has been conducted on D36 steel with thickness of 20 mm. The effects of processing parameters such as welding current, voltage, welding speed and groove angle on welding quality were investigated by Taguchi method. The optimal welding parameters were predicted and the individual importance of each parameter on welding quality was evaluated by examining the signal-to-noise ratio and analysis of variance (ANOVA) results. The importance order of the welding parameters for the welding quality of weld bead was: welding current > welding speed > groove angle > welding voltage. The welding quality of weld bead increased gradually with increasing welding current and welding speed and decreasing groove angle. The optimum values of the welding current, welding speed, groove angle and welding voltage were found to be 1050 A, 27 cm/min, 40∘ and 34 V, respectively.

Identifying Potential Biasing Variables in Student Evaluation of Teaching in a Newly Accredited Business Program in the UAE

ERIC Educational Resources Information Center

Badri, Masood A.; Abdulla, Mohamed; Kamali, Mohammed A.; Dodeen, Hamzeh

2006-01-01

Purpose: The purpose of this paper is to investigate the effect of many factors on student evaluation of teaching. Design/methodology/approach: The study analyzed 3,185 student evaluations of faculty from a newly accredited business program at the United Arab Emirates University using univariate and multi-analysis of variance (ANOVA and MANOVA).…

The application of artificial neural networks and support vector regression for simultaneous spectrophotometric determination of commercial eye drop contents

NASA Astrophysics Data System (ADS)

Valizadeh, Maryam; Sohrabi, Mahmoud Reza

2018-03-01

In the present study, artificial neural networks (ANNs) and support vector regression (SVR) as intelligent methods coupled with UV spectroscopy for simultaneous quantitative determination of Dorzolamide (DOR) and Timolol (TIM) in eye drop. Several synthetic mixtures were analyzed for validating the proposed methods. At first, neural network time series, which one type of network from the artificial neural network was employed and its efficiency was evaluated. Afterwards, the radial basis network was applied as another neural network. Results showed that the performance of this method is suitable for predicting. Finally, support vector regression was proposed to construct the Zilomole prediction model. Also, root mean square error (RMSE) and mean recovery (%) were calculated for SVR method. Moreover, the proposed methods were compared to the high-performance liquid chromatography (HPLC) as a reference method. One way analysis of variance (ANOVA) test at the 95% confidence level applied to the comparison results of suggested and reference methods that there were no significant differences between them. Also, the effect of interferences was investigated in spike solutions.

An approach to optimize sample preparation for MALDI imaging MS of FFPE sections using fractional factorial design of experiments.

PubMed

Oetjen, Janina; Lachmund, Delf; Palmer, Andrew; Alexandrov, Theodore; Becker, Michael; Boskamp, Tobias; Maass, Peter

2016-09-01

A standardized workflow for matrix-assisted laser desorption/ionization imaging mass spectrometry (MALDI imaging MS) is a prerequisite for the routine use of this promising technology in clinical applications. We present an approach to develop standard operating procedures for MALDI imaging MS sample preparation of formalin-fixed and paraffin-embedded (FFPE) tissue sections based on a novel quantitative measure of dataset quality. To cover many parts of the complex workflow and simultaneously test several parameters, experiments were planned according to a fractional factorial design of experiments (DoE). The effect of ten different experiment parameters was investigated in two distinct DoE sets, each consisting of eight experiments. FFPE rat brain sections were used as standard material because of low biological variance. The mean peak intensity and a recently proposed spatial complexity measure were calculated for a list of 26 predefined peptides obtained by in silico digestion of five different proteins and served as quality criteria. A five-way analysis of variance (ANOVA) was applied on the final scores to retrieve a ranking of experiment parameters with increasing impact on data variance. Graphical abstract MALDI imaging experiments were planned according to fractional factorial design of experiments for the parameters under study. Selected peptide images were evaluated by the chosen quality metric (structure and intensity for a given peak list), and the calculated values were used as an input for the ANOVA. The parameters with the highest impact on the quality were deduced and SOPs recommended.

Comparing the efficacy of mydriatic cocktail-soaked sponge and conventional pupil dilation in patients using tamsulosin - a randomized controlled trial.

PubMed

Hargitai, János; Vezendi, László; Vigstrup, Jørgen; Eisgart, Finn; Lundbye-Christensen, Søren; Hargitai, Bálint; Vorum, Henrik

2013-12-20

A strong association exists between the use of tamsulosin and the occurance of intraoperative floppy iris syndrome. Several methods were advocated to overcome the progressive intraopertive miosis.Our purpose was to investigate the effect of a mydriatic-cocktail soaked cellulose sponge on perioperative pupil diameter in tamsulosin-treated patients undergoing elective cataract surgery. Patients using tamsulosin were dilated either with mydriatic-cocktail soaked sponge (group 1) or with conventional eyedrop regimen (group 2). Control patients not taking any α1 adrenergic receptor inhibtors were also dilated with mydriatic sponge (group 3).In all groups oxybuprocain 0.4%, cocain 4%, tropicamide 1%, phenylephrine 10%, diclophenac 0.1% along with chloramphenicol 0.5% were used preoperatively.Pupil diameter (mm) was measured preoperatively, after nucleus delivery, and before IOL implantation. Adverse effects associated with the use of sponge, minor and major intraoperative complications, the use of iris retractors and operation time were recorded.Differences in general between groups were analyzed with a one way analysis of variance (ANOVA); differences between groups in proportions were assessed by Fisher's exact test. Mean pupil diameter (mm) was preopertively: 7.52 ± 1.21, 7.30 ± 1.55 and 7.99 ± 0.96 (ANOVA: p = 0.079); after nucleus delivery: 6 ± 1.20, 6.29 ± 1.12 and 6.52 ± 0.81 (ANOVA: p = 0.123); before IOL implantation: 5.46 ± 1.06, 5.83 ± 1.09 and 6.17 ± 0.89 (ANOVA: p = 0.0291).No adverse effect related to sponge use was detected. Frequency of minor complications, and iris hook use was similar in the two tamsulosin treated group. Operation time did not differ significantly in the three groups. We have found that using a mydriatic cocktail-soaked wick - an alternative way to achieve intraoperative mydriasis for cataract surgery - was as effective and safe as the conventional repeated eyedrops regiment for tamsulosin treated patients. Current Controlled Trials ISRCTN37834752.

Utilization of spectral-spatial characteristics in shortwave infrared hyperspectral images to classify and identify fungi-contaminated peanuts.

PubMed

Qiao, Xiaojun; Jiang, Jinbao; Qi, Xiaotong; Guo, Haiqiang; Yuan, Deshuai

2017-04-01

It's well-known fungi-contaminated peanuts contain potent carcinogen. Efficiently identifying and separating the contaminated can help prevent aflatoxin entering in food chain. In this study, shortwave infrared (SWIR) hyperspectral images for identifying the prepared contaminated kernels. Feature selection method of analysis of variance (ANOVA) and feature extraction method of nonparametric weighted feature extraction (NWFE) were used to concentrate spectral information into a subspace where contaminated and healthy peanuts can have favorable separability. Then, peanut pixels were classified using SVM. Moreover, image segmentation method of region growing was applied to segment the image as kernel-scale patches and meanwhile to number the kernels. The result shows that pixel-wise classification accuracies are 99.13% for breed A, 96.72% for B and 99.73% for C in learning images, and are 96.32%, 94.2% and 97.51% in validation images. Contaminated peanuts were correctly marked as aberrant kernels in both learning images and validation images. Copyright © 2016 Elsevier Ltd. All rights reserved.

A fractional factorial probabilistic collocation method for uncertainty propagation of hydrologic model parameters in a reduced dimensional space

NASA Astrophysics Data System (ADS)

Wang, S.; Huang, G. H.; Huang, W.; Fan, Y. R.; Li, Z.

2015-10-01

In this study, a fractional factorial probabilistic collocation method is proposed to reveal statistical significance of hydrologic model parameters and their multi-level interactions affecting model outputs, facilitating uncertainty propagation in a reduced dimensional space. The proposed methodology is applied to the Xiangxi River watershed in China to demonstrate its validity and applicability, as well as its capability of revealing complex and dynamic parameter interactions. A set of reduced polynomial chaos expansions (PCEs) only with statistically significant terms can be obtained based on the results of factorial analysis of variance (ANOVA), achieving a reduction of uncertainty in hydrologic predictions. The predictive performance of reduced PCEs is verified by comparing against standard PCEs and the Monte Carlo with Latin hypercube sampling (MC-LHS) method in terms of reliability, sharpness, and Nash-Sutcliffe efficiency (NSE). Results reveal that the reduced PCEs are able to capture hydrologic behaviors of the Xiangxi River watershed, and they are efficient functional representations for propagating uncertainties in hydrologic predictions.

Effect of surface treatments on the bond strengths of facing composite resins to zirconia copings.

PubMed

Tsumita, M; Kokubo, Y; Kano, T

2012-09-01

The present study evaluated and compared the bond strength between zirconia and facing composite resin using different surface conditioning methods before and after thermocycling. Four primers, three opaque resins, and two facing composite resins were used, and 10 surface treatment procedures were conducted. The bond strength was measured before and after 4,000 cycles of thermocycling. The mean values of each group were statistically analyzed using one-way analysis of variance (ANOVA). The bond strengths of facing composite resins to zirconia after various treatments varied depending on the primers, opaque resins, body resins, and thermocycling. The application of primers and opaque resins to the zirconia surface after sandblasting is expected to yield strong bond strength of the facing composite resin (Estenia CG&B) even after thermocycling.

Analytical methods development for supramolecular design in solar hydrogen production

NASA Astrophysics Data System (ADS)

Brown, J. R.; Elvington, M.; Mongelli, M. T.; Zigler, D. F.; Brewer, K. J.

2006-08-01

In the investigation of alternative energy sources, specifically, solar hydrogen production from water, the ability to perform experiments with a consistent and reproducible light source is key to meaningful photochemistry. The design, construction, and evaluation of a series of LED array photolysis systems for high throughput photochemistry have been performed. Three array systems of increasing sophistication are evaluated using calorimetric measurements and potassium tris(oxalato)ferrate(II) chemical actinometry and compared with a traditional 1000 W Xe arc lamp source. The results are analyzed using descriptive statistics and analysis of variance (ANOVA). The third generation array is modular, and controllable in design. Furthermore, the third generation array system is shown to be comparable in both precision and photonic output to a 1000 W Xe arc lamp.

Reduced basis ANOVA methods for partial differential equations with high-dimensional random inputs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liao, Qifeng, E-mail: liaoqf@shanghaitech.edu.cn; Lin, Guang, E-mail: guanglin@purdue.edu

2016-07-15

In this paper we present a reduced basis ANOVA approach for partial deferential equations (PDEs) with random inputs. The ANOVA method combined with stochastic collocation methods provides model reduction in high-dimensional parameter space through decomposing high-dimensional inputs into unions of low-dimensional inputs. In this work, to further reduce the computational cost, we investigate spatial low-rank structures in the ANOVA-collocation method, and develop efficient spatial model reduction techniques using hierarchically generated reduced bases. We present a general mathematical framework of the methodology, validate its accuracy and demonstrate its efficiency with numerical experiments.

Subtle Cognitive Effects of Moderate Hypoxia

DTIC Science & Technology

2009-08-01

using SPSS® 13.0 with significance set at an alpha level of .05 for all statistical tests. A repeated measures analysis of variance (ANOVA) was...there was not statistically significant change in reaction time (p=.781), accuracy (p=.152), or throughout (p=.967) with increasing altitude. The...results indicate that healthy individuals aged 19 to 45 years do not experience significant cognitive deficit, as measured by the CogScreen®-HE, when

Effects of Video Weather Training Products, Web-Based Preflight Weather Briefing, and Local Versus Non-Local Pilots on General Aviation Pilot Weather Knowledge and Flight Behavior. Phase 1

DTIC Science & Technology

2010-01-01

Seemingly not . Repeated measures analysis of variance (ANOVA) for posttest - pretest score gain x training product interaction yielded a non-significant...Code 15. Supplemental Notes Work was accomplished under approved task AM-A-07-HRR-521 16. Abstract This research has two main...1 Purpose of This Research

Evaluation of dynamic balance among community-dwelling older adult fallers: a generalizability study of the limits of stability test.

PubMed

Clark, S; Rose, D J

2001-04-01

To establish reliability estimates of the 75% Limits of Stability Test (75% LOS test) when administered to community-dwelling older adults with a history of falls. Generalizability theory was used to estimate both the relative contribution of identified error sources to the total measurement error and generalizability coefficients. A random effects repeated-measures analysis of variance (ANOVA) was used to assess consistency of LOS test movement variables across both days and targets. A motor control research laboratory in a university setting. Fifty community-dwelling older adults with 2 or more falls in the previous year. Spatial and temporal measures of dynamic balance derived from the 75% LOS test included average movement velocity, maximum center of gravity (COG) excursion, end-point COG excursion, and directional control. Estimated generalizability coefficients for 2 testing days ranged from.58 to.87. Total variance in LOS test measures attributable to inconsistencies in day-to-day test performance (Day and Subject x Day facets) ranged from 2.5% to 8.4%. The ANOVA results indicated that no significant differences were observed in the LOS test variables across the 2 testing days. The 75% LOS test administered to older adult fallers on 2 consecutive days provides consistent and reliable measures of dynamic balance.

Surface roughness of glass ionomer cements indicated for uncooperative patients according to surface protection treatment.

PubMed

Pacifici, Edoardo; Bossù, Maurizio; Giovannetti, Agostino; La Torre, Giuseppe; Guerra, Fabrizio; Polimeni, Antonella

2013-01-01

Even today, use of Glass Ionomer Cements (GIC) as restorative material is indicated for uncooperative patients. The study aimed at estimating the surface roughness of different GICs using or not their proprietary surface coatings and at observing the interfaces between cement and coating through SEM. Forty specimens have been obtained and divided into 4 groups: Fuji IX (IX), Fuji IX/G-Coat Plus (IXC), Vitremer (V), Vitremer/Finishing Gloss (VFG). Samples were obtained using silicone moulds to simulate class I restorations. All specimens were processed for profilometric evaluation. The statistical differences of surface roughness between groups were assessed using One-Way Analysis of Variance (One-Way ANOVA) (p<0.05). The Two-Way Analysis of Variance (Two-Way ANOVA) was used to evaluate the influence of two factors: restoration material and presence of coating. Coated restoration specimens (IXC and VFG) were sectioned perpendicular to the restoration surface and processed for SEM evaluation. No statistical differences in roughness could be noticed between groups or factors. Following microscopic observation, interfaces between restoration material and coating were better for group IXC than for group VFG. When specimens are obtained simulating normal clinical procedures, the presence of surface protection does not significantly improve the surface roughness of GICs.

Evaluation of removal efficiency of residual diclofenac in aqueous solution by nanocomposite tungsten-carbon using design of experiment.

PubMed

Salmani, M H; Mokhtari, M; Raeisi, Z; Ehrampoush, M H; Sadeghian, H A

2017-09-01

Wastewater containing pharmaceutical residual components must be treated before being discharged to the environment. This study was conducted to investigate the efficiency of tungsten-carbon nanocomposite in diclofenac removal using design of experiment (DOE). The 27 batch adsorption experiments were done by choosing three effective parameters (pH, adsorbent dose, and initial concentration) at three levels. The nanocomposite was prepared by tungsten oxide and activated carbon powder in a ratio of 1 to 4 mass. The remaining concentration of diclofenac was measured by a spectrometer with adding reagents of 2, 2'-bipyridine, and ferric chloride. Analysis of variance (ANOVA) was applied to determine the main and interaction effects. The equilibrium time for removal process was determined as 30 min. It was observed that the pH had the lowest influence on the removal efficiency of diclofenac. Nanocomposite gave a high removal at low concentration of 5.0 mg/L. The maximum removal for an initial concentration of 5.0 mg/L was 88.0% at contact time of 30 min. The results of ANOVA showed that adsorbent mass was among the most effective variables. Using DOE as an efficient method revealed that tungsten-carbon nanocomposite has high efficiency in the removal of residual diclofenac from the aqueous solution.

Friction Forces during Sliding of Various Brackets for Malaligned Teeth: An In Vitro Study

PubMed Central

Crincoli, Vito; Di Bisceglie, Maria Beatrice; Balsamo, Antonio; Serpico, Vitaliano; Chiatante, Francesco; Pappalettere, Carmine; Boccaccio, Antonio

2013-01-01

Aims. To measure the friction force generated during sliding mechanics with conventional, self-ligating (Damon 3 mx, Smart Clip, and Time 3) and low-friction (Synergy) brackets using different archwire diameters and ligating systems in the presence of apical and buccal malalignments of the canine. Methods. An experimental setup reproducing the right buccal segment of the maxillary arch was designed to measure the friction force generated at the bracket/wire and wire/ligature interfaces of different brackets. A complete factorial plan was drawn up and a three-way analysis of variance (ANOVA) was carried out to investigate whether the following factors affect the values of friction force: (i) degree of malalignment, (ii) diameter of the orthodontic wire, and (iii) bracket/ligature combination. Tukey post hoc test was also conducted to evaluate any statistically significant differences between the bracket/ligature combinations analyzed. Results. ANOVA showed that all the above factors affect the friction force values. The friction force released during sliding mechanics with conventional brackets is about 5-6times higher than that released with the other investigated brackets. A quasilinear increase of the frictional forces was observed for increasing amounts of apical and buccal malalignments. Conclusion. The Synergy bracket with silicone ligature placed around the inner tie-wings appears to yield the best performance. PMID:23533364

The Heart Rate Response to Nintendo Wii Boxing in Young Adults

PubMed Central

Bosch, Pamela R.; Poloni, Joseph; Thornton, Andrew; Lynskey, James V.

2012-01-01

Purpose To determine if 30 minutes of Nintendo Wii Sports boxing provides cardiorespiratory benefits and contributes to the daily exercise recommendations for healthy young adults. Methods Twenty healthy 23- to 27-year-olds participated in two sessions to measure maximum heart rate (HRmax) via a treadmill test and heart rate (HR) response to 30 minutes of Wii Sports boxing. Heart rate in beats per minute (bpm) was measured continuously, and exercise intensity during each minute of play was stratified as a percentage of HRmax. Mixed designs analysis of variance (ANOVA) and Pearson product moment correlations were used to analyze the data. Results Mean (SD) HR response to boxing was 143 (15) bpm or 77.5% (10.0%) of HRmax. The mean HR response for experienced participants was significantly lower than inexperienced participants, P = .007. The ANOVA revealed a significant interaction between experience and time spent at various intensities, P = .009. Experienced participants spent more time in light to vigorous intensities, inexperienced participants in moderate to very hard intensities. Fitness was not correlated with mean HR response to boxing, P = .49. Conclusion Thirty minutes of Nintendo Wii Sports boxing provides a moderate to vigorous aerobic response in healthy young adults and can contribute to daily recommendations for physical activity. PMID:22833705

A study on the compatibility between one-bottle dentin adhesives and composite resins using micro-shear bond strength.

PubMed

Song, Minju; Shin, Yooseok; Park, Jeong-Won; Roh, Byoung-Duck

2015-02-01

This study was performed to determine whether the combined use of one-bottle self-etch adhesives and composite resins from same manufacturers have better bond strengths than combinations of adhesive and resins from different manufacturers. 25 experimental micro-shear bond test groups were made from combinations of five dentin adhesives and five composite resins with extracted human molars stored in saline for 24 hr. Testing was performed using the wire-loop method and a universal testing machine. Bond strength data was statistically analyzed using two way analysis of variance (ANOVA) and Tukey's post hoc test. Two way ANOVA revealed significant differences for the factors of dentin adhesives and composite resins, and significant interaction effect (p < 0.001). All combinations with Xeno V (Dentsply De Trey) and Clearfil S(3) Bond (Kuraray Dental) adhesives showed no significant differences in micro-shear bond strength, but other adhesives showed significant differences depending on the composite resin (p < 0.05). Contrary to the other adhesives, Xeno V and BondForce (Tokuyama Dental) had higher bond strengths with the same manufacturer's composite resin than other manufacturer's composite resin. Not all combinations of adhesive and composite resin by same manufacturers failed to show significantly higher bond strengths than mixed manufacturer combinations.

Effects of receiving-water quality and wastewater treatment on injury, survival, and regrowth of fecal-indicator bacteria and implications for assessment of recreational water quality

USGS Publications Warehouse

Francy, D.S.; Hart, T.L.; Virosteck, C.M.

1996-01-01

Bacterial injury, survival, and regrowth were investigated by use of replicate flow-through incubation chambers placed in the Cuyahoga River or Lake Erie in the greater Cleveland metropolitan area during seven 4-day field studies. The chambers contained wastewater or combined-sewer-overflow (CSO) effluents treated three ways-unchlorinated, chlorinated, and dechlorinated. At timestep intervals, the chamber contents were analyzed for concentrations of injured and healthy fecal coliforms by use of standard selective and enhanced-recovery membrane-filtration methods. Mean percent injuries and survivals were calculated from the fecal-coliform concentration data for each field study. The results of analysis of variance (ANOVA) indicated that treatment affected mean percent injury and survival, whereas site did not. In the warm-weather Lake Erie field study, but not in the warm-weather Cuyahoga River studies, the results of ANOVA indicated that dechlorination enhanced the repair of injuries and regrowth of chlorine-injured fecal coliforms on culture media over chlorination alone. The results of ANOVA on the percent injury from CSO effluent field studies indicated that dechlorination reduced the ability of organisms to recover and regrow on culture media over chlorination alone. However, because of atypical patterns of concentration increases and decreases in some CSO effluent samples, more work needs to be done before the effect of dechlorination and chlorination on reducing fecal-coliform concentrations in CSO effluents can be confirmed. The results of ANOVA on percent survivals found statistically significant differences among the three treatment methods for all but one study. Dechlorination was found to be less effective than chlorination alone in reducing the survival of fecal coliforms in wastewater effluent, but not in CSO effluent. If the concentration of fecal coliforms determined by use of the enhanced-recovery method can be predicted accurately from the concentration found by use of the standard method, then increased monitoring and expense to detect chlorine-injured organisms would be unnecessary. The results of linear regression analysis, however, indicated that the relation between enhanced-recovery and standard-method concentrations was best represented when the data were grouped by treatment. The model generated from linear regression of the unchlorinated data set provided an accurate estimate of enhanced-recovery concentrations from standard-method concentrations, whereas the models generated from the chlorinated and dechlorinated data sets did not. In addition, evaluation of fecal-coliform concentrations found in field studies in terms of Ohio recreational water-quality standards showed that concentrations obtained by standard and enhanced-recovery methods were not comparable. Sample treatment and analysis methods were found to affect the percentage of samples meeting and exceeding Ohio's bathing-water, primary-contact, and secondary-contact standards. Therefore, determining the health risk of swimming in receiving waters was often difficult without information on enhanced-recovery method concentrations and was especially difficult in waters receiving high proportions of chlorinated or dechlorinated effluents.

Validation of different spectrophotometric methods for determination of vildagliptin and metformin in binary mixture

NASA Astrophysics Data System (ADS)

Abdel-Ghany, Maha F.; Abdel-Aziz, Omar; Ayad, Miriam F.; Tadros, Mariam M.

New, simple, specific, accurate, precise and reproducible spectrophotometric methods have been developed and subsequently validated for determination of vildagliptin (VLG) and metformin (MET) in binary mixture. Zero order spectrophotometric method was the first method used for determination of MET in the range of 2-12 μg mL-1 by measuring the absorbance at 237.6 nm. The second method was derivative spectrophotometric technique; utilized for determination of MET at 247.4 nm, in the range of 1-12 μg mL-1. Derivative ratio spectrophotometric method was the third technique; used for determination of VLG in the range of 4-24 μg mL-1 at 265.8 nm. Fourth and fifth methods adopted for determination of VLG in the range of 4-24 μg mL-1; were ratio subtraction and mean centering spectrophotometric methods, respectively. All the results were statistically compared with the reported methods, using one-way analysis of variance (ANOVA). The developed methods were satisfactorily applied to analysis of the investigated drugs and proved to be specific and accurate for quality control of them in pharmaceutical dosage forms.

Effect of monomer composition of polymer matrix on flexural properties of glass fibre-reinforced orthodontic archwire.

PubMed

Ohtonen, J; Vallittu, P K; Lassila, L V J

2013-02-01

To compare force levels obtained from glass fibre-reinforced composite (FRC) archwires. Specifically, FRC wires were compared with polymer matrices having different dimethacrylate monomer compositions. FRC material (E-glass provided by Stick Tech Ltd, Turku, Finland) with continuous unidirectional glass fibres and four different types of dimethacrylate monomer compositions for the resin matrix were tested. Cross-sectionally round FRC archwires fitting into the 0.3 mm slot of a bracket were divided into 16 groups with six specimens in each group. Glass fibres were impregnated by the manufacturer, and they were initially light-cured by hand light-curing unit or additionally post-cured in light-curing oven. The FRC archwire specimens were tested at 37°C according to a three-point bending test in dry and wet conditions using a span length of 10 mm and a crosshead speed of 1.0 mm/minute. The wires were loaded until final failure. The data were statistically analysed using analysis of variance (ANOVA). The dry FRC archwire specimens revealed higher load values than water stored ones, regardless of the polymer matrix. A majority of the FRC archwires showed higher load values after being post-cured. ANOVA revealed that the polymer matrix, curing method, and water storage had a significant effect (P < 0.05) on the flexural behaviour of the FRC archwire. Polymer matrix composition, curing method, and water storage affected the flexural properties and thus, force level and working range which could be obtained from the FRC archwire.

[How medical students perform academically by admission types?].

PubMed

Kim, Se-Hoon; Lee, Keumho; Hur, Yera; Kim, Ji-Ha

2013-09-01

Despite the importance of selecting students whom are capable for medical education and to become a good doctor, not enough studies have been done in the category. This study focused on analysing the medical students' academic performance (grade point average, GPA) differences, flunk and dropout rates by admission types. From 2004 to 2010, we gathered 369 Konyang University College of Medicine's students admission data and analyzed the differences between admission method and academic achievement, differences in failure and dropout rates. Analysis of variance (ANOVA), ordinary least square, and logistic regression were used. The rolling students showed higher academic achievement from year 1 to 3 than regular students (p < 0.01). Using admission type variable as control variable in multiple regression model similar results were shown. But unlike the results of ANOVA, GPA differences by admission types were shown not only in lower academic years but also in year 6 (p < 0.01). From the regression analysis of flunk and dropout rate by admission types, regular admission type students showed higher drop out rate than the rolling ones which demonstrates admission types gives significant effect on flunk or dropout rates in medical students (p < 0.01). The rolling admissions type students tend to show lower flunk rate and dropout rates and perform better academically. This implies selecting students primarily by Korean College Scholastic Ability Test does not guarantee their academic success in medical education. Thus we suggest a more in-depth comprehensive method of selecting students that are appropriate to individual medical school's educational goal.

A multitrait-multimethod analysis of variance of teachers' ratings of aggression, hyperactivity, and inattention.

PubMed

Roberts, M A; Milich, R; Loney, J; Caputo, J

1981-09-01

The convergent and discriminant validities of three teacher rating scale measures of the traits of hyperactivity, aggression, and inattention were explored, using the multitrait-multimethod matrix approach of Campbell and Fiske (1959), as well as an analysis of variance procedure (Stanley, 1961). In the present study teachers rated children from their elementary school classrooms on the above traits. The results provided strong evidence for convergent validity. Data also indicated that these traits can be reliable differentiated by teachers, suggesting that research aimed at better understanding the unique contributions of hyperactivity, aggression, and inattention is warranted. The respective benefits of analyzing multitrait-multimethod matrices by employing the ANOVA procedure or by using the Campbell and Fiske (1959) criteria were discussed.

Reviewing and comparing self-concept in patients undergoing hemodialysis and peritoneal dialysis

PubMed Central

Shahgholian, Nahid; Tajdari, Setareh; Nasiri, Mahmoud

2012-01-01

Background: Chronic renal disease is a health problem in today’s world. In the end-stages of renal disease patients depend upon alternative therapies including dialysis for their survival. However, dialysis causes several stressors on physical, mental and social performance of patients. The present study aimed to review and compare the self-concept in patients undergoing hemodialysis and peritoneal dialysis. Materials and Methods: This was a case-control study including two groups of patients, undergoing hemodialysis and peritoneal dialysis, who referred to Al-Zahra and Ali Asghar Hospitals, which are affiliated to Isfahan University of Medical Sciences. These groups were compared to the control group. Data were collected through completing the form of demographic characteristics and a questionnaire, written by the researcher, pertaining to the self-concept which was collected by the samples. The data were analyzed by the Software SPSS version 18. Findings: ANOVA (analysis of variance) showed that statistically there was a significant difference between mean score of self-concept in the three physical (body-image), psychological, and social self aspects in the two groups of hemodialysis and peritoneal dialysis with the control group; however, Duncan’s post-hoc analysis showed no significant difference between mean score of self-concept in the three mentioned aspects in the two groups of hemodialysis and peritoneal dialysis. Furthermore, ANOVA (analysis of variance) showed that there was no significant difference between mean score of the spiritual aspect of the self-concept in the two groups of hemodialysis and peritoneal dialysis with the control group. Duncan’s post-hoc analysis also showed no significant difference in this aspect between the two groups of hemodialysis and peritoneal dialysis. Conclusions: Patients undergoing dialysis have many psychological disorders and the type of dialysis is not of much importance in this regard; therefore, adequate education and information for clients in order to use appropriate methods of adaptation as well as appropriate social relationship, continuing social support and developing health policies seem necessary in order to prevent mental disorders and providing required services and supports for patients. PMID:23833607

Statistical analysis of fNIRS data: a comprehensive review.

PubMed

Tak, Sungho; Ye, Jong Chul

2014-01-15

Functional near-infrared spectroscopy (fNIRS) is a non-invasive method to measure brain activities using the changes of optical absorption in the brain through the intact skull. fNIRS has many advantages over other neuroimaging modalities such as positron emission tomography (PET), functional magnetic resonance imaging (fMRI), or magnetoencephalography (MEG), since it can directly measure blood oxygenation level changes related to neural activation with high temporal resolution. However, fNIRS signals are highly corrupted by measurement noises and physiology-based systemic interference. Careful statistical analyses are therefore required to extract neuronal activity-related signals from fNIRS data. In this paper, we provide an extensive review of historical developments of statistical analyses of fNIRS signal, which include motion artifact correction, short source-detector separation correction, principal component analysis (PCA)/independent component analysis (ICA), false discovery rate (FDR), serially-correlated errors, as well as inference techniques such as the standard t-test, F-test, analysis of variance (ANOVA), and statistical parameter mapping (SPM) framework. In addition, to provide a unified view of various existing inference techniques, we explain a linear mixed effect model with restricted maximum likelihood (ReML) variance estimation, and show that most of the existing inference methods for fNIRS analysis can be derived as special cases. Some of the open issues in statistical analysis are also described. Copyright © 2013 Elsevier Inc. All rights reserved.

Optimizing occupational exposure measurement strategies when estimating the log-scale arithmetic mean value--an example from the reinforced plastics industry.

PubMed

Lampa, Erik G; Nilsson, Leif; Liljelind, Ingrid E; Bergdahl, Ingvar A

2006-06-01

When assessing occupational exposures, repeated measurements are in most cases required. Repeated measurements are more resource intensive than a single measurement, so careful planning of the measurement strategy is necessary to assure that resources are spent wisely. The optimal strategy depends on the objectives of the measurements. Here, two different models of random effects analysis of variance (ANOVA) are proposed for the optimization of measurement strategies by the minimization of the variance of the estimated log-transformed arithmetic mean value of a worker group, i.e. the strategies are optimized for precise estimation of that value. The first model is a one-way random effects ANOVA model. For that model it is shown that the best precision in the estimated mean value is always obtained by including as many workers as possible in the sample while restricting the number of replicates to two or at most three regardless of the size of the variance components. The second model introduces the 'shared temporal variation' which accounts for those random temporal fluctuations of the exposure that the workers have in common. It is shown for that model that the optimal sample allocation depends on the relative sizes of the between-worker component and the shared temporal component, so that if the between-worker component is larger than the shared temporal component more workers should be included in the sample and vice versa. The results are illustrated graphically with an example from the reinforced plastics industry. If there exists a shared temporal variation at a workplace, that variability needs to be accounted for in the sampling design and the more complex model is recommended.

Nasal airway and septal variation in unilateral and bilateral cleft lip and palate.

PubMed

Starbuck, John M; Friel, Michael T; Ghoneima, Ahmed; Flores, Roberto L; Tholpady, Sunil; Kula, Katherine

2014-10-01

Cleft lip and palate (CLP) affects the dentoalveolar and nasolabial facial regions. Internal and external nasal dysmorphology may persist in individuals born with CLP despite surgical interventions. 7-18 year old individuals born with unilateral and bilateral CLP (n = 50) were retrospectively assessed using cone beam computed tomography. Anterior, middle, and posterior nasal airway volumes were measured on each facial side. Septal deviation was measured at the anterior and posterior nasal spine, and the midpoint between these two locations. Data were evaluated using principal components analysis (PCA), multivariate analysis of variance (MANOVA), and post-hoc ANOVA tests. PCA results show partial separation in high dimensional space along PC1 (48.5% variance) based on age groups and partial separation along PC2 (29.8% variance) based on CLP type and septal deviation patterns. MANOVA results indicate that age (P = 0.007) and CLP type (P ≤ 0.001) significantly affect nasal airway volume and septal deviation. ANOVA results indicate that anterior nasal volume is significantly affected by age (P ≤ 0.001), whereas septal deviation patterns are significantly affected by CLP type (P ≤ 0.001). Age and CLP type affect nasal airway volume and septal deviation patterns. Nasal airway volumes tend to be reduced on the clefted sides of the face relative to non-clefted sides of the face. Nasal airway volumes tend to strongly increase with age, whereas septal deviation values tend to increase only slightly with age. These results suggest that functional nasal breathing may be impaired in individuals born with the unilateral and bilateral CLP deformity. © 2014 Wiley Periodicals, Inc.

Physiological Efficacy of a Lightweight Ambient Air Cooling Unit for Various Applications

DTIC Science & Technology

1993-10-01

Acei 10. Mean skin temperature during continuous work . N*TIS. CRjI DTIC TAB 11. Thermal comfort rate during continuous work. . U nagnounf. 4...perceived exertion (RPE) and thermal comfort (TC) were taken every 10 min. Statistical analysis using a 3-way analysis of variance (ANOVA) was conducted...may account for the fact that no statistically significant differences were seen for thermal comfort and ratings of perceived exertion between the IC

Comparative Study of Motor Performance of Deaf and Hard of Hearing Students in Reaction Time, Visual-Motor Control and Upper Limb Speed and Dexterity Abilities

ERIC Educational Resources Information Center

Gkouvatzi, Anastasia N.; Mantis, Konstantinos; Kambas, Antonis

2010-01-01

Using the Bruininks-Oseretsky Test the motor performance of 34 deaf--hard-of-hearing pupils, 6-14 year, was evaluated in reaction time, visual-motor control and upper limb speed and dexterity. The two-way ANOVA variance analysis for two independent variables, group, age, and the Post Hoc (Scheffe test) for multiple comparisons were used. The…

Effects of a Network-Centric Multi-Modal Communication Tool on a Communication Monitoring Task

DTIC Science & Technology

2012-03-01

replaced (Nelson, Bolia, Vidulich, & Langhorne , 2004). Communication will continue to be the central tool for Command and Control (C2) operators. However...Nelson, Bolia, Vidulich, & Langhorne , 2004). The two highest ratings for most potential technologies were data capture/replay tools and chat...analysis of variance (ANOVA). A significant main effect was found for Difficulty, F (1, 13) = 21.11, p < .05; the overall level of detections was

Microbiological assay for the determination of meropenem in pharmaceutical dosage form.

PubMed

Mendez, Andreas S L; Weisheimer, Vanessa; Oppe, Tércio P; Steppe, Martin; Schapoval, Elfrides E S

2005-04-01

Meropenem is a highly active carbapenem antibiotic used in the treatment of a wide range of serious infections. The present work reports a microbiological assay, applying the cylinder-plate method, for the determination of meropenem in powder for injection. The validation method yielded good results and included linearity, precision, accuracy and specificity. The assay is based on the inhibitory effect of meropenem upon the strain of Micrococcus luteus ATCC 9341 used as the test microorganism. The results of assay were treated statistically by analysis of variance (ANOVA) and were found to be linear (r=0.9999) in the range of 1.5-6.0 microg ml(-1), precise (intra-assay: R.S.D.=0.29; inter-assay: R.S.D.=0.94) and accurate. A preliminary stability study of meropenem was performed to show that the microbiological assay is specific for the determination of meropenem in the presence of its degradation products. The degraded samples were also analysed by the HPLC method. The proposed method allows the quantitation of meropenem in pharmaceutical dosage form and can be used for the drug analysis in routine quality control.

Factors Affecting Optimal Surface Roughness of AISI 4140 Steel in Turning Operation Using Taguchi Experiment

NASA Astrophysics Data System (ADS)

Novareza, O.; Sulistiyarini, D. H.; Wiradmoko, R.

2018-02-01

This paper presents the result of using Taguchi method in turning process of medium carbon steel of AISI 4140. The primary concern is to find the optimal surface roughness after turning process. The taguchi method is used to get a combination of factors and factor levels in order to get the optimum surface roughness level. Four important factors with three levels were used in experiment based on Taguchi method. A number of 27 experiments were carried out during the research and analysed using analysis of variance (ANOVA) method. The result of surface finish was determined in Ra type surface roughness. The depth of cut was found to be the most important factors for reducing the surface roughness of AISI 4140 steel. On the contrary, the other important factors i.e. spindle speed and rake side angle of the tool were proven to be less factors that affecting the surface finish. It is interesting to see the effect of coolant composition that gained the second important factors to reduce the roughness. It may need further research to explain this result.

Classification of emotional states from electrocardiogram signals: a non-linear approach based on hurst

PubMed Central

2013-01-01

Background Identifying the emotional state is helpful in applications involving patients with autism and other intellectual disabilities; computer-based training, human computer interaction etc. Electrocardiogram (ECG) signals, being an activity of the autonomous nervous system (ANS), reflect the underlying true emotional state of a person. However, the performance of various methods developed so far lacks accuracy, and more robust methods need to be developed to identify the emotional pattern associated with ECG signals. Methods Emotional ECG data was obtained from sixty participants by inducing the six basic emotional states (happiness, sadness, fear, disgust, surprise and neutral) using audio-visual stimuli. The non-linear feature ‘Hurst’ was computed using Rescaled Range Statistics (RRS) and Finite Variance Scaling (FVS) methods. New Hurst features were proposed by combining the existing RRS and FVS methods with Higher Order Statistics (HOS). The features were then classified using four classifiers – Bayesian Classifier, Regression Tree, K- nearest neighbor and Fuzzy K-nearest neighbor. Seventy percent of the features were used for training and thirty percent for testing the algorithm. Results Analysis of Variance (ANOVA) conveyed that Hurst and the proposed features were statistically significant (p < 0.001). Hurst computed using RRS and FVS methods showed similar classification accuracy. The features obtained by combining FVS and HOS performed better with a maximum accuracy of 92.87% and 76.45% for classifying the six emotional states using random and subject independent validation respectively. Conclusions The results indicate that the combination of non-linear analysis and HOS tend to capture the finer emotional changes that can be seen in healthy ECG data. This work can be further fine tuned to develop a real time system. PMID:23680041

Factors Associated with the Competencies of Public Health Workers in Township Hospitals: A Cross-Sectional Survey in Chongqing Municipality, China

PubMed Central

He, Zhifei; Cheng, Zhaohui; Fu, Hang; Tang, Shangfeng; Fu, Qian; Fang, Haiqing; Xian, Yue; Ming, Hui; Feng, Zhanchun

2015-01-01

Purpose: This study aimed to explore the competencies of public health workers (PHWs) of township hospitals in Chongqing Municipality (China), and determine the related impact factors of the competencies of PHWs; Methods: A cross-sectional research was conducted on 314 PHWs from 27 township hospitals in three districts in Chongqing Municipality (China), from June to August 2014. A self-assessment questionnaire was established on the basis of literature reviews and a competency dictionary. The differences in competencies among the three districts were determined by adopting the chi-square test, t-test, analysis of variance (ANOVA) method, and the impact factors of the competencies of PHWs were determined by adopting stepwise regression analysis. Results: (1) Results of the demographic characteristics of PHWs in three sample districts of Chongqing Municipality showed that a significant difference in age of PHWs (p = 0.021 < 0.05) and the majors of PHWs (p = 0.045 < 0.05); (2) In terms of the self-evaluation competency results of PHWs in township hospitals, seven among the 11 aspects were found to have significant differences in the three districts by the ANOVA test; (3) By adopting the t-test and ANOVA method, results of the relationship between the characteristics of PHWs and their competency scores showed that significant differences were found in the economic level (p = 0.000 < 0.05), age (p = 0.000 < 0.05), years of working (p = 0.000 < 0.05) and title of PHWs (p = 0.000 < 0.05); (4) Stepwise regression analysis was used to determine the impact factors of the competencies of PHWs in township hospitals, including the economic level (p = 0.000 < 0.001), years of working (p = 0.000 < 0.001), title (p = 0.001 < 0.005), and public health major (p = 0.007 < 0.01). Conclusions: The competencies of the township hospital staff in Chongqing Municipality (China), are generally insufficient, therefore, regulating the medical education and training skills of PHWs is crucial to improve the competencies of PHWs in the township hospitals of Chongqing Municipality. The results of this study can be mirrored in other areas of China. PMID:26569273

Student Expenses in Residency Interviewing

PubMed Central

Walling, Anne; Nilsen, Kari; Callaway, Paul; Grothusen, Jill; Gillenwater, Cole; King, Samantha; Unruh, Gregory

2017-01-01

Background The student costs of residency interviewing are of increasing concern but limited current information is available. Updated, more detailed information would assist students and residency programs in decisions about residency selection. The study objective was to measure the expenses and time spent in residency interviewing by the 2016 graduating class of the University of Kansas School of Medicine and assess the impact of gender, regional campus location, and primary care application. Methods All 195 students who participated in the 2016 National Residency Matching Program (NRMP) received a 33 item questionnaire addressing interviewing activity, expenses incurred, time invested and related factors. Main measures were self-reported estimates of expenses and time spent interviewing. Descriptive analyses were applied to participant characteristics and responses. Multivariate analysis of variance (MANOVA) and chi-square tests compared students by gender, campus (main/regional), and primary care/other specialties. Analyses of variance (ANOVA) on the dependent variables provided follow-up tests on significant MANOVA results. Results A total of 163 students (84%) completed the survey. The average student reported 38 (1–124) applications, 16 (1–54) invitations, 11 (1–28) completed interviews, and spent $3,500 ($20–$12,000) and 26 (1–90) days interviewing. No significant differences were found by gender. After MANOVA and ANOVA analyses, non-primary care applicants reported significantly more applications, interviews, and expenditures, but less program financial support. Regional campus students reported significantly fewer invitations, interviews, and days interviewing, but equivalent costs when controlled for primary care application. Cost was a limiting factor in accepting interviews for 63% and time for 53% of study respondents. Conclusions Students reported investing significant time and money in interviewing. After controlling for other variables, primary care was associated with significantly lowered expenses. Regional campus location was associated with fewer interviews and less time interviewing. Gender had no significant impact on any aspect studied. PMID:29472969

Study of Effects on Mechanical Properties of PLA Filament which is blended with Recycled PLA Materials

NASA Astrophysics Data System (ADS)

Babagowda; Kadadevara Math, R. S.; Goutham, R.; Srinivas Prasad, K. R.

2018-02-01

Fused deposition modeling is a rapidly growing additive manufacturing technology due to its ability to build functional parts having complex geometry. The mechanical properties of the build part is depends on several process parameters and build material of the printed specimen. The aim of this study is to characterize and optimize the parameters such as layer thickness and PLA build material which is mixed with recycled PLA material. Tensile and flexural or bending test are carried out to determine the mechanical response characteristics of the printed specimen. Taguchi method is used for number of experiments and Taguchi S/N ratio is used to identify the set of parameters which give good results for respective response characteristics, effectiveness of each parameters is investigated by using analysis of variance (ANOVA).

An augmented classical least squares method for quantitative Raman spectral analysis against component information loss.

PubMed

Zhou, Yan; Cao, Hui

2013-01-01

We propose an augmented classical least squares (ACLS) calibration method for quantitative Raman spectral analysis against component information loss. The Raman spectral signals with low analyte concentration correlations were selected and used as the substitutes for unknown quantitative component information during the CLS calibration procedure. The number of selected signals was determined by using the leave-one-out root-mean-square error of cross-validation (RMSECV) curve. An ACLS model was built based on the augmented concentration matrix and the reference spectral signal matrix. The proposed method was compared with partial least squares (PLS) and principal component regression (PCR) using one example: a data set recorded from an experiment of analyte concentration determination using Raman spectroscopy. A 2-fold cross-validation with Venetian blinds strategy was exploited to evaluate the predictive power of the proposed method. The one-way variance analysis (ANOVA) was used to access the predictive power difference between the proposed method and existing methods. Results indicated that the proposed method is effective at increasing the robust predictive power of traditional CLS model against component information loss and its predictive power is comparable to that of PLS or PCR.

The Effect of maceration period on contents and color brightness of phycoerythrin from Gracilaria sp.

NASA Astrophysics Data System (ADS)

Lidiana, H.; Sulmartiwi, L.; Andriyono, S.

2018-04-01

Natural pigment from seaweed, is currently required by humans as one of active compounds that are usefull in the field of health, cosmetics and food. One of the pigments which potentially can be developed is red phycobilin pigment. The pigment can be obtained from Gracilaria sp. throught maceration method. This research aims to find out wheter there is influence from the long maceration time toward to the content and the phycoerytrin color brightness of Gracilaria sp. The reseach method used experimental experiment with complete randomized design (CRD) which was consisted of nine treatments of long time maceration period three replications. Data analysis was used the Analysis of Variance (ANOVA) and continued to Duncan’s Multiple Distance Test to. The result showed that treatments with the time of maceration for 30 hours was the best treatment on phycoerytrin content about 0.98 mg/g with the brightness value was 19.73 L*, reddish value was 7.23 a*, and yellowish value was 2.87 b* of Gracilaria sp.

Application of the Taguchi analytical method for optimization of effective parameters of the chemical vapor deposition process controlling the production of nanotubes/nanobeads.

PubMed

Sharon, Maheshwar; Apte, P R; Purandare, S C; Zacharia, Renju

2005-02-01

Seven variable parameters of the chemical vapor deposition system have been optimized with the help of the Taguchi analytical method for getting a desired product, e.g., carbon nanotubes or carbon nanobeads. It is observed that almost all selected parameters influence the growth of carbon nanotubes. However, among them, the nature of precursor (racemic, R or Technical grade camphor) and the carrier gas (hydrogen, argon and mixture of argon/hydrogen) seem to be more important parameters affecting the growth of carbon nanotubes. Whereas, for the growth of nanobeads, out of seven parameters, only two, i.e., catalyst (powder of iron, cobalt, and nickel) and temperature (1023 K, 1123 K, and 1273 K), are the most influential parameters. Systematic defects or islands on the substrate surface enhance nucleation of novel carbon materials. Quantitative contributions of process parameters as well as optimum factor levels are obtained by performing analysis of variance (ANOVA) and analysis of mean (ANOM), respectively.

Biotoxicity of commonly used root canal sealers: A meta-analysis

PubMed Central

Kaur, Amandeep; Shah, Naseem; Logani, Ajay; Mishra, Navin

2015-01-01

Introduction: The main objective of a root canal sealer is to provide a fluid tight seal. The purpose of this systematic meta-analysis was to determine the relative toxicity of commonly used root canal sealers like zinc oxide eugenol, calcium hydroxide, and resin-based sealers. Materials and Methods: An online search was conducted in peer-reviewed journals listed in PubMed, Cochrane, EBSCO, and IndMed databases between 2000 and 2012). Statistical analysis was carried out by using analysis of variance (ANOVA) followed by post-hoc comparison by Bonferroni method. The comparison between toxicity at 24 h and between 3 and 7 days was done by using paired t-test for each sealer. Results: At 24 h, the relative biotoxicity of the three sealers reported was insignificant (P- value 0.29), but the difference in toxicity was found significant (P < 0.001) after 3 days. Conclusion: Calcium hydroxide sealer and zinc oxide eugenol were found to be significantly biotoxic as compared to resin-based sealers after 3 days. PMID:25829682

Estimating linear effects in ANOVA designs: the easy way.

PubMed

Pinhas, Michal; Tzelgov, Joseph; Ganor-Stern, Dana

2012-09-01

Research in cognitive science has documented numerous phenomena that are approximated by linear relationships. In the domain of numerical cognition, the use of linear regression for estimating linear effects (e.g., distance and SNARC effects) became common following Fias, Brysbaert, Geypens, and d'Ydewalle's (1996) study on the SNARC effect. While their work has become the model for analyzing linear effects in the field, it requires statistical analysis of individual participants and does not provide measures of the proportions of variability accounted for (cf. Lorch & Myers, 1990). In the present methodological note, using both the distance and SNARC effects as examples, we demonstrate how linear effects can be estimated in a simple way within the framework of repeated measures analysis of variance. This method allows for estimating effect sizes in terms of both slope and proportions of variability accounted for. Finally, we show that our method can easily be extended to estimate linear interaction effects, not just linear effects calculated as main effects.

Behavioral and Biological Effects of Prenatal Stress and Social Enrichment: Relevance to Heart Disease

DTIC Science & Technology

2009-08-17

Weight: Repeated Measures (Between-Subjects Effects ) Body Weight: Analysis of Variance (ANOVA) - Males Only Body Weight: Last Measurement Corticosterone ...also decreased the effects of stress on freezing behavior and corticosterone levels in mice (Benaroya-Milshtein et aI., 2004). Summary of Social...rats (e.g., Faradayet aI., 2005; Kalinichev et aI., 2002; Kant et aI., 1987; Hayley et aI., 2001). 22 Corticosterone responses to stressors are

ERP evidence suggests executive dysfunction in ecstasy polydrug users.

PubMed

Roberts, C A; Fairclough, S H; Fisk, J E; Tames, F; Montgomery, C

2013-08-01

Deficits in executive functions such as access to semantic/long-term memory have been shown in ecstasy users in previous research. Equally, there have been many reports of equivocal findings in this area. The current study sought to further investigate behavioural and electro-physiological measures of this executive function in ecstasy users. Twenty ecstasy-polydrug users, 20 non-ecstasy-polydrug users and 20 drug-naïve controls were recruited. Participants completed background questionnaires about their drug use, sleep quality, fluid intelligence and mood state. Each individual also completed a semantic retrieval task whilst 64 channel Electroencephalography (EEG) measures were recorded. Analysis of Variance (ANOVA) revealed no between-group differences in behavioural performance on the task. Mixed ANOVA on event-related potential (ERP) components P2, N2 and P3 revealed significant between-group differences in the N2 component. Subsequent exploratory univariate ANOVAs on the N2 component revealed marginally significant between-group differences, generally showing greater negativity at occipito-parietal electrodes in ecstasy users compared to drug-naïve controls. Despite absence of behavioural differences, differences in N2 magnitude are evidence of abnormal executive functioning in ecstasy-polydrug users.

Finite Element Model Calibration Approach for Area I-X

NASA Technical Reports Server (NTRS)

Horta, Lucas G.; Reaves, Mercedes C.; Buehrle, Ralph D.; Templeton, Justin D.; Gaspar, James L.; Lazor, Daniel R.; Parks, Russell A.; Bartolotta, Paul A.

2010-01-01

Ares I-X is a pathfinder vehicle concept under development by NASA to demonstrate a new class of launch vehicles. Although this vehicle is essentially a shell of what the Ares I vehicle will be, efforts are underway to model and calibrate the analytical models before its maiden flight. Work reported in this document will summarize the model calibration approach used including uncertainty quantification of vehicle responses and the use of non-conventional boundary conditions during component testing. Since finite element modeling is the primary modeling tool, the calibration process uses these models, often developed by different groups, to assess model deficiencies and to update parameters to reconcile test with predictions. Data for two major component tests and the flight vehicle are presented along with the calibration results. For calibration, sensitivity analysis is conducted using Analysis of Variance (ANOVA). To reduce the computational burden associated with ANOVA calculations, response surface models are used in lieu of computationally intensive finite element solutions. From the sensitivity studies, parameter importance is assessed as a function of frequency. In addition, the work presents an approach to evaluate the probability that a parameter set exists to reconcile test with analysis. Comparisons of pretest predictions of frequency response uncertainty bounds with measured data, results from the variance-based sensitivity analysis, and results from component test models with calibrated boundary stiffness models are all presented.

Finite Element Model Calibration Approach for Ares I-X

NASA Technical Reports Server (NTRS)

Horta, Lucas G.; Reaves, Mercedes C.; Buehrle, Ralph D.; Templeton, Justin D.; Lazor, Daniel R.; Gaspar, James L.; Parks, Russel A.; Bartolotta, Paul A.

2010-01-01

Ares I-X is a pathfinder vehicle concept under development by NASA to demonstrate a new class of launch vehicles. Although this vehicle is essentially a shell of what the Ares I vehicle will be, efforts are underway to model and calibrate the analytical models before its maiden flight. Work reported in this document will summarize the model calibration approach used including uncertainty quantification of vehicle responses and the use of nonconventional boundary conditions during component testing. Since finite element modeling is the primary modeling tool, the calibration process uses these models, often developed by different groups, to assess model deficiencies and to update parameters to reconcile test with predictions. Data for two major component tests and the flight vehicle are presented along with the calibration results. For calibration, sensitivity analysis is conducted using Analysis of Variance (ANOVA). To reduce the computational burden associated with ANOVA calculations, response surface models are used in lieu of computationally intensive finite element solutions. From the sensitivity studies, parameter importance is assessed as a function of frequency. In addition, the work presents an approach to evaluate the probability that a parameter set exists to reconcile test with analysis. Comparisons of pre-test predictions of frequency response uncertainty bounds with measured data, results from the variance-based sensitivity analysis, and results from component test models with calibrated boundary stiffness models are all presented.

Analysis of Statistical Methods Currently used in Toxicology Journals

PubMed Central

Na, Jihye; Yang, Hyeri

2014-01-01

Statistical methods are frequently used in toxicology, yet it is not clear whether the methods employed by the studies are used consistently and conducted based on sound statistical grounds. The purpose of this paper is to describe statistical methods used in top toxicology journals. More specifically, we sampled 30 papers published in 2014 from Toxicology and Applied Pharmacology, Archives of Toxicology, and Toxicological Science and described methodologies used to provide descriptive and inferential statistics. One hundred thirteen endpoints were observed in those 30 papers, and most studies had sample size less than 10, with the median and the mode being 6 and 3 & 6, respectively. Mean (105/113, 93%) was dominantly used to measure central tendency, and standard error of the mean (64/113, 57%) and standard deviation (39/113, 34%) were used to measure dispersion, while few studies provide justifications regarding why the methods being selected. Inferential statistics were frequently conducted (93/113, 82%), with one-way ANOVA being most popular (52/93, 56%), yet few studies conducted either normality or equal variance test. These results suggest that more consistent and appropriate use of statistical method is necessary which may enhance the role of toxicology in public health. PMID:25343012

Analysis of Statistical Methods Currently used in Toxicology Journals.

PubMed

Na, Jihye; Yang, Hyeri; Bae, SeungJin; Lim, Kyung-Min

2014-09-01

Statistical methods are frequently used in toxicology, yet it is not clear whether the methods employed by the studies are used consistently and conducted based on sound statistical grounds. The purpose of this paper is to describe statistical methods used in top toxicology journals. More specifically, we sampled 30 papers published in 2014 from Toxicology and Applied Pharmacology, Archives of Toxicology, and Toxicological Science and described methodologies used to provide descriptive and inferential statistics. One hundred thirteen endpoints were observed in those 30 papers, and most studies had sample size less than 10, with the median and the mode being 6 and 3 & 6, respectively. Mean (105/113, 93%) was dominantly used to measure central tendency, and standard error of the mean (64/113, 57%) and standard deviation (39/113, 34%) were used to measure dispersion, while few studies provide justifications regarding why the methods being selected. Inferential statistics were frequently conducted (93/113, 82%), with one-way ANOVA being most popular (52/93, 56%), yet few studies conducted either normality or equal variance test. These results suggest that more consistent and appropriate use of statistical method is necessary which may enhance the role of toxicology in public health.

A healthy volunteer study to investigate trace element contamination of blood samples by stainless steel venepuncture needles.

PubMed

Hodnett, Darragh; Wood, David M; Raja, Kishor; Dargan, Paul I; Shah, Anoop D

2012-02-01

The trace elements cobalt (Co), chromium (Cr), manganese (Mn) and nickel (Ni) are normally present at low concentrations in blood. There has been a concern that stainless steel venepuncture needles typically used for collection of blood samples may contaminate these samples, leading to the masking of deficiency states or causing potential clinical confusion as to whether an individual has a "toxic" concentration. To determine whether there is any difference between the concentrations of the trace elements obtained by different methods of blood sampling. We took blood samples using a standard venepuncture needle, a "butterfly" winged infusion needle (three consecutive samples) and a plastic intravenous cannula (three consecutive samples) from 10 healthy volunteers. We measured the concentrations of Co, Cr, Mn and Ni in the samples using Inductively Coupled Plasma Mass Spectrometry, and used analysis of variance (ANOVA) to investigate if there was any difference between the methods of blood sampling. The mean ± standard deviation blood metal concentrations were: Co 0.33 ± 0.2 μg/l, Cr 2.43 ± 1.55 μg/l, Mn 8.07 ± 7.74 μg/l and Ni 10.4 ± 4.69 μg/l. There was considerable variation between blood metal concentrations of individual subjects and a few sporadic high values. By ANOVA, there was no significant difference between the metal concentrations measured using different methods of blood collection. It is not necessary to routinely use a plastic cannula for blood sampling for trace element analysis. However, it is possible that sporadic contamination due to stainless steel needles may occur, so we would recommend that unexpected high concentrations are verified by taking a second sample taken through a plastic cannula.

Effect of surface treatments on shear bond strength of resin composite bonded to CAD/CAM resin-ceramic hybrid materials

PubMed Central

Güngör, Merve Bankoğlu; Bal, Bilge Turhan; Ünver, Senem; Doğan, Aylin

2016-01-01

PURPOSE The purpose of this study was to assess the effect of surface treatments on shear bond strength of resin composite bonded to thermocycled and non-thermocycled CAD/CAM resin-ceramic hybrid materials. MATERIALS AND METHODS 120 specimens (10×10×2 mm) from each material were divided into 12 groups according to different surface treatments in combination with thermal aging procedures. Surface treatment methods were airborne-particle abrasion (abraded with 50 micron alumina particles), dry grinding (grinded with 125 µm grain size bur), and hydrofluoric acid (9%) and silane application. According to the thermocycling procedure, the groups were assigned as non-thermocycled, thermocycled after packing composites, and thermocycled before packing composites. The average surface roughness of the non-thermocycled specimens were measured after surface treatments. After packing composites and thermocycling procedures, shear bond strength (SBS) of the specimens were tested. The results of surface roughness were statistically analyzed by 2-way Analysis of Variance (ANOVA), and SBS results were statistically analyzed by 3-way ANOVA. RESULTS Surface roughness of GC were significantly lower than that of LU and VE (P<.05). The highest surface roughness was observed for dry grinding group, followed by airborne particle abraded group (P<.05). Comparing the materials within the same surface treatment method revealed that untreated surfaces generally showed lower SBS values. The values of untreated LU specimens showed significantly different SBS values compared to those of other surface treatment groups (P<.05). CONCLUSION SBS was affected by surface treatments. Thermocycling did not have any effect on the SBS of the materials except acid and silane applied GC specimens, which were subjected to thermocycling before packing of the composite resin. PMID:27555894

Study of the Impact of Educational Behavioral Interventions on Fatigue in Mothers in the Postpartum Period in the Groups of Face-to-Face and Electronic Training

PubMed Central

Gholami, Zahra; Mohammadirizi, Soheila; Bahadoran, Parvin

2017-01-01

Background: Maternal fatigue in the postpartum period include factors that affect the quality of life and health of both the mother and newborn. This study aimed to investigate two educational approaches regarding mother's fatigue in the postpartum period. Materials and Methods: This experimental study was performed among 110 pregnant mothers during their postpartum care using random sampling. The participants were divided in three groups, namely, face-to-face, e-learning, and control groups. Interventions included individual meetings between the researcher and mothers in the face-to-face group and giving educational compact disc to the e-learning department to improve maternal fatigue. Personal information and fertility data was obtained (before training); the maternal fatigue questionnaire Fatigue Severity Scale (FSS) was completed before and after any type of (face-to-face, e-learning, and control) education. Obtained data were analyzed using one-way analysis of variance (ANOVA) and repeated-measures ANOVA. Results: Results showed that both face-to-face and e-learning methods had similar maternal fatigue scores. The average change on the maternal fatigue score in the second treatment was (p = 0.02) and the third treatment was (p < 0.001)among three groups that was indicative of significant statistical differences. Similarly, there was no statistically significant difference in the average maternal fatigue score between the two groups before the intervention and in the second and third groups after the intervention. Therefore, over time, the training was unaffected. Conclusions: The findings of this study indicate that both face-to-face and e-learning methods are effective to reduce maternal postpartum fatigue. PMID:29184586

Digital versus conventional techniques for pattern fabrication of implant-supported frameworks

PubMed Central

Alikhasi, Marzieh; Rohanian, Ahmad; Ghodsi, Safoura; Kolde, Amin Mohammadpour

2018-01-01

Objective: The aim of this experimental study was to compare retention of frameworks cast from wax patterns fabricated by three different methods. Materials and Methods: Thirty-six implant analogs connected to one-piece abutments were divided randomly into three groups according to the wax pattern fabrication method (n = 12). Computer-aided design/computer-aided manufacturing (CAD/CAM) milling machine, three-dimensional printer, and conventional technique were used for fabrication of waxing patterns. All laboratory procedures were performed by an expert-reliable technician to eliminate intra-operator bias. The wax patterns were cast, finished, and seated on related abutment analogs. The number of adjustment times was recorded and analyzed by Kruskal–Wallis test. Frameworks were cemented on the corresponding analogs with zinc phosphate cement and tensile resistance test was used to measure retention value. Statistical Analysis Used: One-way analysis of variance (ANOVA) and post hoc Tukey tests were used for statistical analysis. Level of significance was set at P < 0.05. Results: The mean retentive values of 680.36 ± 21.93 N, 440.48 ± 85.98 N, and 407.23 ± 67.48 N were recorded for CAD/CAM, rapid prototyping, and conventional group, respectively. One-way ANOVA test revealed significant differences among the three groups (P < 0.001). The post hoc Tukey test showed significantly higher retention for CAD/CAM group (P < 0.001), while there was no significant difference between the two other groups (P = 0.54). CAD/CAM group required significantly more adjustments (P < 0.001). Conclusions: CAD/CAM-fabricated wax patterns showed significantly higher retention for implant-supported cement-retained frameworks; this could be a valuable help when there are limitations in the retention of single-unit implant restorations. PMID:29657528

Modeling the low-velocity impact characteristics of woven glass epoxy composite laminates using artificial neural networks

NASA Astrophysics Data System (ADS)

Mathivanan, N. Rajesh; Mouli, Chandra

2012-12-01

In this work, a new methodology based on artificial neural networks (ANN) has been developed to study the low-velocity impact characteristics of woven glass epoxy laminates of EP3 grade. To train and test the networks, multiple impact cases have been generated using statistical analysis of variance (ANOVA). Experimental tests were performed using an instrumented falling-weight impact-testing machine. Different impact velocities and impact energies on different thicknesses of laminates were considered as the input parameters of the ANN model. This model is a feed-forward back-propagation neural network. Using the input/output data of the experiments, the model was trained and tested. Further, the effects of the low-velocity impact response of the laminates at different energy levels were investigated by studying the cause-effect relationship among the influential factors using response surface methodology. The most significant parameter is determined from the other input variables through ANOVA.

Untargeted Identification of Wood Type-Specific Markers in Particulate Matter from Wood Combustion.

PubMed

Weggler, Benedikt A; Ly-Verdu, Saray; Jennerwein, Maximilian; Sippula, Olli; Reda, Ahmed A; Orasche, Jürgen; Gröger, Thomas; Jokiniemi, Jorma; Zimmermann, Ralf

2016-09-20

Residential wood combustion emissions are one of the major global sources of particulate and gaseous organic pollutants. However, the detailed chemical compositions of these emissions are poorly characterized due to their highly complex molecular compositions, nonideal combustion conditions, and sample preparation steps. In this study, the particulate organic emissions from a masonry heater using three types of wood logs, namely, beech, birch, and spruce, were chemically characterized using thermal desorption in situ derivatization coupled to a GCxGC-ToF/MS system. Untargeted data analyses were performed using the comprehensive measurements. Univariate and multivariate chemometric tools, such as analysis of variance (ANOVA), principal component analysis (PCA), and ANOVA simultaneous component analysis (ASCA), were used to reduce the data to highly significant and wood type-specific features. This study reveals substances not previously considered in the literature as meaningful markers for differentiation among wood types.

Flow Injection Mass Spectral Fingerprints Demonstrate Chemical Differences in Rio Red Grapefruit with Respect to Year, Harvest Time, and Conventional versus Organic Farming

PubMed Central

Chen, Pei; Harnly, James M.; Lester, Gene E.

2013-01-01

Spectral fingerprints were acquired for Rio Red grapefruit using flow injection electrospray ionization with ion trap and time-of-flight mass spectrometry (FI-ESI-IT-MS and FI-ESI-TOF-MS). Rio Red grapefruits were harvested 3 times a year (early, mid, and late harvests) in 2005 and 2006 from conventionally and organically grown trees. Data analysis using analysis of variance principal component analysis (ANOVA-PCA) demonstrated that, for both MS systems, the chemical patterns were different as a function of farming mode (conventional vs organic), as well as growing year and time of harvest. This was visually obvious with PCA and was shown to be statistically significant using ANOVA. The spectral fingerprints provided a more inclusive view of the chemical composition of the grapefruit and extended previous conclusions regarding the chemical differences between conventionally and organically grown Rio Red grapefruit. PMID:20337420

Application of Taguchi approach to optimize the sol-gel process of the quaternary Cu2ZnSnS4 with good optical properties

NASA Astrophysics Data System (ADS)

Nkuissi Tchognia, Joël Hervé; Hartiti, Bouchaib; Ridah, Abderraouf; Ndjaka, Jean-Marie; Thevenin, Philippe

2016-07-01

Present research deals with the optimal deposition parameters configuration for the synthesis of Cu2ZnSnS4 (CZTS) thin films using the sol-gel method associated to spin coating on ordinary glass substrates without sulfurization. The Taguchi design with a L9 (34) orthogonal array, a signal-to-noise (S/N) ratio and an analysis of variance (ANOVA) are used to optimize the performance characteristic (optical band gap) of CZTS thin films. Four deposition parameters called factors namely the annealing temperature, the annealing time, the ratios Cu/(Zn + Sn) and Zn/Sn were chosen. To conduct the tests using the Taguchi method, three levels were chosen for each factor. The effects of the deposition parameters on structural and optical properties are studied. The determination of the most significant factors of the deposition process on optical properties of as-prepared films is also done. The results showed that the significant parameters are Zn/Sn ratio and the annealing temperature by applying the Taguchi method.

The effects of listening to preferred music on pain intensity after open heart surgery

PubMed Central

Jafari, Hedayat; Zeydi, Amir Emami; Khani, Soghra; Esmaeili, Ravanbakhsh; Soleimani, Aria

2012-01-01

Background: Pain is a common phenomenon after surgery. Cardiac surgeries are no exception and patients generally experience acute pain after these surgeries. Inadequate pain management after cardiac surgery predisposes patients to many complications. Therefore, the aim of this study was to determine the effects of listening to preferred music on pain intensity after open heart surgery. Materials and Methods: This study was a randomized clinical trial (RCT) conducted in open heart intensive care unit (ICU) of a university hospital in Sari, Iran. A total of 60 patients who were scheduled to undergo open heart surgery were randomly allocated in two groups. Patients in the intervention group (n = 30) listened to their preferred music by headphones for 30 minutes, whereas those in the control group (n = 30) did not listen to music. Using a Numerical Rating Scale (NRS), pain intensity was measured among the patients before the intervention, and immediately, 30 minutes and one hour after the intervention. Data was analyzed by Chi-square test, student's t-test and repeated measures analysis of variance (ANOVA). Findings: Mean pain intensity in the intervention group before, immediately after, 30 minutes and one hour after the intervention were 5.8, 3.1, 2.5 and 2.4, respectively. Corresponding numbers in the control group were 4.7, 4.7, 4.8 and 4.9, respectively. Repeated measures ANOVA showed music to significantly reduce pain intensity (p = 0.0001) Conclusions: Music can be effective as a non-pharmacological, inexpensive, non-invasive and side effect free method for pain management after open heart surgery. PMID:23493927

The effect of ligation on the load deflection characteristics of nickel titanium orthodontic wire.

PubMed

Kasuya, Shugo; Nagasaka, Satoshi; Hanyuda, Ai; Ishimura, Sadao; Hirashita, Ayao

2007-12-01

This study examined the effect of ligation on the load-deflection characteristics of nickel-titanium (NiTi) orthodontic wire. A modified three-point bending system was used for bending the NiTi round wire, which was inserted and ligated in the slots of three brackets, one of which was bonded to each of the three bender rods. Three different ligation methods, stainless steel ligature (SSL), slot lid (SL), and elastomeric ligature (EL), were employed, as well as a control with neither bracket nor ligation (NBL). The tests were repeated five times under each condition. Comparisons were made of load-deflection curve, load at maximum deflection of 2,000 microm, and load at a deflection of 1,500 microm during unloading. Analysis of Variance (ANOVA) and Dunnett's test were conducted to determine method difference (alpha = 0.05). The interaction between deflection and ligation was tested, using repeated-measures ANOVA (alpha = 0.05). The load values of the ligation groups were two to three times greater than the NBL group at a deflection of 1,500 microm during unloading: 4.37 N for EL, 3.90 N for SSL, 3.02 N for SL, and 1.49 N for NBL (P < 0.01). For the EL, a plateau region disappeared in the unloading curve. SL showed the smallest load. The ligation of the bracket wire may make NiTi wire exhibit a significantly heavier load than that traditionally expected. NiTi wire exhibited the majority of its true superelasticity with SL, whereas EL may act as a restraint on its superelasticity.

Investigation of Structures of Microwave Microelectromechanical-System Switches by Taguchi Method

NASA Astrophysics Data System (ADS)

Lai, Yeong-Lin; Lin, Chien-Hung

2007-10-01

The optimal design of microwave microelectromechanical-system (MEMS) switches by the Taguchi method is presented. The structures of the switches are analyzed and optimized in terms of the effective stiffness constant, the maximum von Mises stress, and the natural frequency in order to improve the reliability and the performance of the MEMS switches. There are four factors, each of which has three levels in the Taguchi method for the MEMS switches. An L9(34) orthogonal array is used for the matrix experiments. The characteristics of the experiments are studied by the finite-element method and the analytical method. The responses of the signal-to-noise (S/N) ratios of the characteristics of the switches are investigated. The statistical analysis of variance (ANOVA) is used to interpret the experimental results and decide the significant factors. The final optimum setting, A1B3C1D2, predicts that the effective stiffness constant is 1.06 N/m, the maximum von Mises stress is 76.9 MPa, and the natural frequency is 29.331 kHz. The corresponding switching time is 34 μs, and the pull-down voltage is 9.8 V.

Different Spectrophotometric Methods for Simultaneous Determination of Trelagliptin and Its Acid Degradation Product

PubMed Central

Hassan, Mostafa A.; Zaghary, Wafaa A.

2018-01-01

New spectrophotometric and chemometric methods were carried out for the simultaneous assay of trelagliptin (TRG) and its acid degradation product (TAD) and applied successfully as a stability indicating assay to recently approved Zafatek® tablets. TAD was monitored using TLC to ensure complete degradation. Furthermore, HPLC was used to confirm dealing with one major acid degradation product. The proposed methods were developed by manipulating zero-order, first-derivative, and ratio spectra of TRG and TAD using simultaneous equation, first-derivative, and mean-centering methods, respectively. Using Spectra Manager II and Minitab v.14 software, the absorbance at 274 nm–260.4 nm, amplitudes at 260.4 nm–274.0 nm, and mean-centered values at 287.6 nm–257.2 nm were measured against methanol as a blank for TRG and TAD, respectively. Linearity and the other validation parameters were acceptable at concentration ranges of 5–50 μg/mL and 2.5–25 μg/mL for TRG and TAD, respectively. Using one-way analysis of variance (ANOVA), the optimized methods were compared and proved to be accurate for the simultaneous assay of TRG and TAD. PMID:29629213

Different Spectrophotometric Methods for Simultaneous Determination of Trelagliptin and Its Acid Degradation Product.

PubMed

Mowaka, Shereen; Ayoub, Bassam M; Hassan, Mostafa A; Zaghary, Wafaa A

2018-01-01

New spectrophotometric and chemometric methods were carried out for the simultaneous assay of trelagliptin (TRG) and its acid degradation product (TAD) and applied successfully as a stability indicating assay to recently approved Zafatek® tablets. TAD was monitored using TLC to ensure complete degradation. Furthermore, HPLC was used to confirm dealing with one major acid degradation product. The proposed methods were developed by manipulating zero-order, first-derivative, and ratio spectra of TRG and TAD using simultaneous equation, first-derivative, and mean-centering methods, respectively. Using Spectra Manager II and Minitab v.14 software, the absorbance at 274 nm-260.4 nm, amplitudes at 260.4 nm-274.0 nm, and mean-centered values at 287.6 nm-257.2 nm were measured against methanol as a blank for TRG and TAD, respectively. Linearity and the other validation parameters were acceptable at concentration ranges of 5-50  μ g/mL and 2.5-25  μ g/mL for TRG and TAD, respectively. Using one-way analysis of variance (ANOVA), the optimized methods were compared and proved to be accurate for the simultaneous assay of TRG and TAD.

Effect of electrical spot welding on load deflection rate of orthodontic wires.

PubMed

Alavi, Shiva; Abrishami, Arezoo

2015-01-01

One of the methods used for joining metals together is welding, which can be carried out using different techniques such as electric spot welding. This study evaluated the effect of electric spot welding on the load deflection rate of stainless steel and chromium-cobalt orthodontic wires. In this experimental-laboratory study, load deflection rate of 0.016 × 0.022 inch stainless steel and chromium cobalt wires were evaluated in five groups (n =18): group one: Stainless steel wires, group two: chromium-cobalt wires, group three: stainless steel wires welded to stainless steel wires, group four: Stainless steel wires welded to chromium-cobalt wires, group five: chromium-cobalt wire welded to chromium-cobalt wires. Afterward, the forces induced by the samples in 0.5 mm, 1 mm, 1.5 mm deflection were measured using a universal testing machine. Then mean force measured for each group was compared with other groups. The data were analyzed using repeated measure analysis of variance (ANOVA), one-way ANOVA, and paired t-test by the SPSS software. The significance level was set as 0.05. The Tukey test showed that there were significant differences between the load deflection rates of welded groups compared to control ones (P < 0.001). Considering the limitation of this study, the electric spot welding process performed on stainless steel and chromium-cobalt wires increased their load deflection rates.

Mental and Reproductive Health Correlates of Academic Performance among Debre Berhan University Female Students, Ethiopia: The Case of Premenstrual Dysphoric Disorder

PubMed Central

Alemu, Sisay Mulugeta; Haile, Yohannes Gebreegziabhere

2017-01-01

Background Globally 3 to 8% of reproductive age women are suffering from premenstrual dysphoric disorder (PMDD). Several mental and reproductive health-related factors cause low academic achievement during university education. However, limited data exist in Ethiopia. The aim of the study was to investigate mental and reproductive health correlates of academic performance. Methods Institution based cross-sectional study was conducted with 667 Debre Berhan University female students from April to June 2015. Academic performance was the outcome variable. Mental and reproductive health characteristics were explanatory variables. Two-way analysis of variance (ANOVA) test of association was applied to examine group difference in academic performance. Result Among 529 students who participated, 49.3% reported mild premenstrual syndrome (PMS), 36.9% reported moderate/severe PMS, and 13.8% fulfilled PMDD diagnostic criteria. The ANOVA test of association revealed that there was no significant difference in academic performance between students with different level of PMS experience (F-statistic = 0.08, p value = 0.93). Nevertheless, there was a significant difference in academic performance between students with different length of menses (F-statistic = 5.15, p value = 0.006). Conclusion There was no significant association between PMS experience and academic performance, but on the other hand, the length of menses significantly associated with academic performance. PMID:28630874

Conversion of rice husk into fermentable sugar by two stage hydrolysis

NASA Astrophysics Data System (ADS)

Salimi, M. N.; Lim, S. E.; Yusoff, A. H. M.; Jamlos, M. F.

2017-10-01

Rice husks, a complex lignocellulosic biomass which comprised of high cellulose content (38-50%), hemicellulose (23-32%) and lignin (15-25%) possesses the potential to pursue as low cost feedstock for production of ethanol. Dilute sulfuric acid at concentration of 1, 2, 3 (%, v/v) were used for pretreatments at varied hydrolysis time (15-60 min) and enzymatic saccharification at range of 45-60˚C and pH 4.5-6.0 were evaluated for conversion of rice husk’s cellulose and hemicellulose to fermentable sugars. The maximum yield of fermentable sugars from rice husks by dilute sulfuric acid (2%, 60 minutes) was 0.0751 g/l. Total fermentable sugar was identified using dinitrosalicylic acid (DNS) method and expressed in g/l. Enzymatic hydrolysis for conversion of cellulose to fermentable sugar has been studied by applying response surface methodology (RSM) and Analysis of Variance (ANOVA). Two independent variables namely initial pH and incubation temperature were considered using Central Composite Design (CCD). The determination coefficient, R2 obtained was 0.9848. This indicates that 98.48% capriciousness in the respond could be clarified by the ANOVA. Based on the data shown by Design Expert software, the optimum condition for total sugar production was at pH 6.0 and temperature 45˚C as it produced 0.5086 g/l of total sugar.

Randomized trial of the effect of contact lens wear on self-perception in children.

PubMed

Walline, Jeffrey J; Jones, Lisa A; Sinnott, Loraine; Chitkara, Monica; Coffey, Bradley; Jackson, John Mark; Manny, Ruth E; Rah, Marjorie J; Prinstein, Mitchell J

2009-03-01

To determine whether contact lens wear affects children's self-perceptions. The Adolescent and Child Health Initiative to Encourage Vision Empowerment Study was a randomized, single-masked trial conducted at five clinical centers in the United States. Subjects were 8- to 11-year-old myopic children randomly assigned to wear spectacles (n = 237) or soft contact lenses (n = 247) for 3 years. The primary endpoint was the Self-Perception Profile for Children Global Self-Worth scale. Secondary outcomes included the Physical Appearance, Athletic Competence, Scholastic Competence, Behavioral Conduct, and Social Acceptance Self-Perception Profile for Children scales. Global self-worth was not affected by contact lens wear [analysis of variance (ANOVA), difference = 0.06; 95% CI, -0.004 to 0.117]. Physical appearance (ANOVA, difference = 0.15; 95% CI, 0.07 to 0.22), athletic competence (ANOVA, difference = 0.08; 95% CI, 0.01 to 0.15), and social acceptance (ANOVA, difference = 0.10; 95% CI, 0.03 to 0.17) were all greater for contact lens wearers. Although contact lens wear does not affect global self-perceptions of 8- to 11-year-old myopic children their physical appearance, athletic competence, and social acceptance self-perceptions are likely to improve with contact lens wear. Eye care practitioners should consider the social and visual benefits of contact lens wear when choosing the most appropriate vision correction modality for children as young as 8 years of age.

Factors influencing heterogeneity of radiation-induced DNA-damage measured by the alkaline comet assay.

PubMed

Seidel, Clemens; Lautenschläger, Christine; Dunst, Jürgen; Müller, Arndt-Christian

2012-04-20

To investigate whether different conditions of DNA structure and radiation treatment could modify heterogeneity of response. Additionally to study variance as a potential parameter of heterogeneity for radiosensitivity testing. Two-hundred leukocytes per sample of healthy donors were split into four groups. I: Intact chromatin structure; II: Nucleoids of histone-depleted DNA; III: Nucleoids of histone-depleted DNA with 90 mM DMSO as antioxidant. Response to single (I-III) and twice (IV) irradiation with 4 Gy and repair kinetics were evaluated using %Tail-DNA. Heterogeneity of DNA damage was determined by calculation of variance of DNA-damage (V) and mean variance (Mvar), mutual comparisons were done by one-way analysis of variance (ANOVA). Heterogeneity of initial DNA-damage (I, 0 min repair) increased without histones (II). Absence of histones was balanced by addition of antioxidants (III). Repair reduced heterogeneity of all samples (with and without irradiation). However double irradiation plus repair led to a higher level of heterogeneity distinguishable from single irradiation and repair in intact cells. Increase of mean DNA damage was associated with a similarly elevated variance of DNA damage (r = +0.88). Heterogeneity of DNA-damage can be modified by histone level, antioxidant concentration, repair and radiation dose and was positively correlated with DNA damage. Experimental conditions might be optimized by reducing scatter of comet assay data by repair and antioxidants, potentially allowing better discrimination of small differences. Amount of heterogeneity measured by variance might be an additional useful parameter to characterize radiosensitivity.

Determining baselines and variability of elements in plants and soils near the Kenai National Wildlife Refuge, Alaska

USGS Publications Warehouse

Crock, J.G.; Severson, R.C.; Gough, L.P.

1992-01-01

Recent investigations on the Kenai Peninsula had two major objectives: (1) to establish elemental baseline concentrations ranges for native vegetation and soils; and, (2) to determine the sampling density required for preparing stable regional geochemical maps for various elements in native plants and soils. These objectives were accomplished using an unbalanced, nested analysis-of-variance (ANOVA) barbell sampling design. Hylocomium splendens (Hedw.) BSG (feather moss, whole plant), Picea glauca (Moench) Voss (white spruce, twigs and needles), and soil horizons (02 and C) were collected and analyzed for major and trace total element concentrations. Using geometric means and geometric deviations, expected baseline ranges for elements were calculated. Results of the ANOVA show that intensive soil or plant sampling is needed to reliably map the geochemistry of the area, due to large local variability. For example, producing reliable element maps of feather moss using a 50 km cell (at 95% probability) would require sampling densities of from 4 samples per cell for Al, Co, Fe, La, Li, and V, to more than 15 samples per cell for Cu, Pb, Se, and Zn.Recent investigations on the Kenai Peninsula had two major objectives: (1) to establish elemental baseline concentrations ranges for native vegetation and soils; and, (2) to determine the sampling density required for preparing stable regional geochemical maps for various elements in native plants and soils. These objectives were accomplished using an unbalanced, nested analysis-of-variance (ANOVA) barbell sampling design. Hylocomium splendens (Hedw.) BSG (feather moss, whole plant), Picea glauca (Moench) Voss (white spruce, twigs and needles), and soil horizons (02 and C) were collected and analyzed for major and trace total element concentrations. Using geometric means and geometric deviations, expected baseline ranges for elements were calculated. Results of the ANOVA show that intensive soil or plant sampling is needed to reliably map the geochemistry of the area, due to large local variability. For example, producing reliable element maps of feather moss using a 50 km cell (at 95% probability) would require sampling densities of from 4 samples per cell Al, Co, Fe, La, Li, and V, to more than 15 samples per cell for Cu, Pb, Se, and Zn.

Pharmacological and Behavioral Enhancement of Neuroplasticity in the MPTP Lesioned Mouse and Nonhuman Primate

DTIC Science & Technology

2007-05-01

and post - synaptic dopamine biosynthesis, uptake and receptor expression as well as glutamatergic synapses. This hypothesis will be tested through...0.05) compared to mice at 7 days (9.6 ± 3.2%) or 30 days post -MPTP (16.5 ± 7.3%). The tail suspension test showed a significant increase in percent of...were compared using one-way analysis of variance (ANOVA), followed by the Fisher post hoc test for comparison of multiple means for the following

Over-the-counter pharmaceuticals: exploratory research of consumer preference toward solid oral dosage forms.

PubMed

Reisenwitz, T H; Wimbish, G J

1996-01-01

The capsule dosage form in nonprescription pharmaceuticals persists as being one of the most vulnerable to product tampering. This study examines consumer preference toward three solid oral dosage forms (capsules, caplets, and tablets) in nonprescription products. Thirteen independent variables representing dosage form attributes are measured on semantic differential scales. The data are analyzed using analysis of variance (ANOVA) and factor analysis. Implications for the pharmaceutical marketer are noted. Future directions for research are also outlined.

GLIMMPSE Lite: Calculating Power and Sample Size on Smartphone Devices

PubMed Central

Munjal, Aarti; Sakhadeo, Uttara R.; Muller, Keith E.; Glueck, Deborah H.; Kreidler, Sarah M.

2014-01-01

Researchers seeking to develop complex statistical applications for mobile devices face a common set of difficult implementation issues. In this work, we discuss general solutions to the design challenges. We demonstrate the utility of the solutions for a free mobile application designed to provide power and sample size calculations for univariate, one-way analysis of variance (ANOVA), GLIMMPSE Lite. Our design decisions provide a guide for other scientists seeking to produce statistical software for mobile platforms. PMID:25541688

Comparison of various extraction techniques for the determination of polycyclic aromatic hydrocarbons in worms.

PubMed

Mooibroek, D; Hoogerbrugge, R; Stoffelsen, B H G; Dijkman, E; Berkhoff, C J; Hogendoorn, E A

2002-10-25

Two less laborious extraction methods, viz. (i) a simplified liquid extraction using light petroleum or (ii) microwave-assisted solvent extraction (MASE), for the analysis of polycyclic aromatic hydrocarbons (PAHs) in samples of the compost worm Eisenia andrei, were compared with a reference method. After extraction and concentration, analytical methodology consisted of a cleanup of (part) of the extract with high-performance gel permeation chromatography (HPGPC) and instrumental analysis of 15 PAHs with reversed-phase liquid chromatography with fluorescence detection (RPLC-FLD). Comparison of the methods was done by analysing samples with incurred residues (n=15, each method) originating from an experiment in which worms were exposed to a soil contaminated with PAHs. Simultaneously, the performance of the total lipid determination of each method was established. Evaluation of the data by means of principal component analysis (PCA) and analysis of variance (ANOVA) revealed that the performance of the light petroleum method for both the extraction of PAHs (concentration range 1-30 ng/g) and lipid content corresponds very well with the reference method. Compared to the reference method, the MASE method yielded somewhat lower concentrations for the less volatile PAHs, e.g., dibenzo[ah]anthracene and benzo[ghi]perylene and provided a significant higher amount of co-extracted material.

Diffusional interaction behavior of NSAIDs in lipid bilayer membrane using molecular dynamics (MD) simulation: Aspirin and Ibuprofen.

PubMed

Sodeifian, Gholamhossein; Razmimanesh, Fariba

2018-05-10

In this research, for the first time, molecular dynamics (MD) method was used to simulate aspirin and ibuprofen at various concentrations and in neutral and charged states. Effects of the concentration (dosage), charge state, and existence of an integral protein in the membrane on the diffusion rate of drug molecules into lipid bilayer membrane were investigated on 11 systems, for which the parameters indicating diffusion rate and those affecting the rate were evaluated. Considering the diffusion rate, a suitable score was assigned to each system, based on which, analysis of variance (ANOVA) was performed. By calculating the effect size of the indicative parameters and total scores, an optimum system with the highest diffusion rate was determined. Consequently, diffusion rate controlling parameters were obtained: the drug-water hydrogen bond in protein-free systems and protein-drug hydrogen bond in the systems containing protein.

Certified reference material of volatile organic compounds for environmental analysis: BTEX in methanol.

PubMed

Neves, Laura A; Almeida, Renato R R; Rego, Eliane P; Rodrigues, Janaína Marques; de Carvalho, Lucas Junqueira; de M Goulart, Ana Letícia

2015-04-01

The Brazilian Metrology Institute (National Institute of Metrology, Quality, and Technology, Inmetro) has been developing a certified reference material (CRM) of the volatile organic compounds benzene; toluene; ethylbenzene; and ortho, meta, and para-xylenes (BTEX) in methanol, to ensure quality control for environmental-analysis measurements. The objective of this paper is to present the results of certification studies: uncertainty estimates related to characterization, a homogeneity study, and a stability study on a single lot of CRM composed of BTEX in methanol. The method used analysis of variance (ANOVA), a statistical tool, to evaluate the homogeneity and stability of the BTEX CRM, which complies with ISO Guide 30 series. The homogeneity and stability of the BTEX CRM was confirmed for all analytes and their respective properties. All the procedures used in this study complied with ISO GUIDE 34, ISO GUIDE 35, and the guide to the expression of uncertainty of measurement (GUM).

Ex vivo fracture resistance of endodontically treated maxillary central incisors restored with fiber-reinforced composite posts and experimental dentin posts

PubMed Central

Kathuria, Ambica; Kavitha, M; Khetarpal, Suchit

2011-01-01

Aim: To compare the fracture resistance of teeth restored with fiber-reinforced composite (FRC) posts and experimental dentin posts milled from human root dentin. Materials and Methods: Thirty maxillary central incisors were divided into three groups of ten each. Twenty teeth were restored with FRC posts and solid dentin posts and numbered as Groups 2 and 3 respectively while Group 1 acted as the control, without any post. The teeth were loaded at 135° angle to their long axes after core build-up and the failure loads were recorded. Results: One-way Analysis of Variance (ANOVA) and Bonferroni multiple comparisons revealed a significant difference among test groups with the control group showing the highest fracture resistance, followed by the dentin post group and lastly the FRC post group. Conclusions: Teeth restored with dentin posts exhibited better fracture resistance than those restored with FRC posts. PMID:22144812

Microclimate monitoring of Ariadne's house (Pompeii, Italy) for preventive conservation of fresco paintings.

PubMed

Merello, Paloma; García-Diego, Fernando-Juan; Zarzo, Manuel

2012-11-28

Ariadne's house, located at the city center of ancient Pompeii, is of great archaeological value due to the fresco paintings decorating several rooms. In order to assess the risks for long-term conservation affecting the valuable mural paintings, 26 temperature data-loggers and 26 relative humidity data-loggers were located in four rooms of the house for the monitoring of ambient conditions. Data recorded during 372 days were analyzed by means of graphical descriptive methods and analysis of variance (ANOVA). Results revealed an effect of the roof type and number of walls of the room. Excessive temperatures were observed during the summer in rooms covered with transparent roofs, and corrective actions were taken. Moreover, higher humidity values were recorded by sensors on the floor level. The present work provides guidelines about the type, number, calibration and position of thermohygrometric sensors recommended for the microclimate monitoring of mural paintings in outdoor or semi-confined environments.

Decreased oral bioavailability of loxoprofen at second administration in human subjects.

PubMed

Kim, I W; Choo, K S; Han, T G; Kim, K S; Chung, S J; Lee, M H; Shim, C K

2000-01-01

The objective of this study was to determine the extent of period effect on the pharmacokineitcs of loxoprofen during consecutive dosing. Loxipen and Loxonin tablets were administered to 16 healthy Korean male subjects at a single dose of 60 mg as loxoprofen sodium anhydrous in a 2 x 2 crossover investigation with a two-week wash-out phase. Concentrations of loxoprofen in plasma were measured by HPLC method for 6 h. The two formulations were found bioequivalent, but analysis of variance (ANOVA) indicated that there was a significant (p < 0.05) period effect in AUCinf (area under the plasma concentration-time curve from time zero to infinity) between the administrations. A 20% decrease in the AUC was seen at the second administration. This period effect on pharmacokinetics of loxoprofen may be relevant for the patients who need consecutive administration of the drug.

The relationship between quality of work life and turnover intention of primary health care nurses in Saudi Arabia

PubMed Central

2012-01-01

Background Quality of work life (QWL) has been found to influence the commitment of health professionals, including nurses. However, reliable information on QWL and turnover intention of primary health care (PHC) nurses is limited. The aim of this study was to examine the relationship between QWL and turnover intention of PHC nurses in Saudi Arabia. Methods A cross-sectional survey was used in this study. Data were collected using Brooks’ survey of Quality of Nursing Work Life, the Anticipated Turnover Scale and demographic data questions. A total of 508 PHC nurses in the Jazan Region, Saudi Arabia, completed the questionnaire (RR = 87%). Descriptive statistics, t-test, ANOVA, General Linear Model (GLM) univariate analysis, standard multiple regression, and hierarchical multiple regression were applied for analysis using SPSS v17 for Windows. Results Findings suggested that the respondents were dissatisfied with their work life, with almost 40% indicating a turnover intention from their current PHC centres. Turnover intention was significantly related to QWL. Using standard multiple regression, 26% of the variance in turnover intention was explained by QWL, p < 0.001, with R2 = .263. Further analysis using hierarchical multiple regression found that the total variance explained by the model as a whole (demographics and QWL) was 32.1%, p < 0.001. QWL explained an additional 19% of the variance in turnover intention, after controlling for demographic variables. Conclusions Creating and maintaining a healthy work life for PHC nurses is very important to improve their work satisfaction, reduce turnover, enhance productivity and improve nursing care outcomes. PMID:22970764

Multivariate and geo-spatial approach for seawater quality of Chidiyatappu Bay, south Andaman Islands, India.

PubMed

Jha, Dilip Kumar; Vinithkumar, Nambali Valsalan; Sahu, Biraja Kumar; Dheenan, Palaiya Sukumaran; Das, Apurba Kumar; Begum, Mehmuna; Devi, Marimuthu Prashanthi; Kirubagaran, Ramalingam

2015-07-15

Chidiyatappu Bay is one of the least disturbed marine environments of Andaman & Nicobar Islands, the union territory of India. Oceanic flushing from southeast and northwest direction is prevalent in this bay. Further, anthropogenic activity is minimal in the adjoining environment. Considering the pristine nature of this bay, seawater samples collected from 12 sampling stations covering three seasons were analyzed. Principal Component Analysis (PCA) revealed 69.9% of total variance and exhibited strong factor loading for nitrite, chlorophyll a and phaeophytin. In addition, analysis of variance (ANOVA-one way), regression analysis, box-whisker plots and Geographical Information System based hot spot analysis further simplified and supported multivariate results. The results obtained are important to establish reference conditions for comparative study with other similar ecosystems in the region. Copyright © 2015 Elsevier Ltd. All rights reserved.

Factors Associated with the Competencies of Public Health Workers in Township Hospitals: A Cross-Sectional Survey in Chongqing Municipality, China.

PubMed

He, Zhifei; Cheng, Zhaohui; Fu, Hang; Tang, Shangfeng; Fu, Qian; Fang, Haiqing; Xian, Yue; Ming, Hui; Feng, Zhanchun

2015-11-09

This study aimed to explore the competencies of public health workers (PHWs) of township hospitals in Chongqing Municipality (China), and determine the related impact factors of the competencies of PHWs; A cross-sectional research was conducted on 314 PHWs from 27 township hospitals in three districts in Chongqing Municipality (China), from June to August 2014. A self-assessment questionnaire was established on the basis of literature reviews and a competency dictionary. The differences in competencies among the three districts were determined by adopting the chi-square test, t-test, analysis of variance (ANOVA) method, and the impact factors of the competencies of PHWs were determined by adopting stepwise regression analysis. (1) RESULTS of the demographic characteristics of PHWs in three sample districts of Chongqing Municipality showed that a significant difference in age of PHWs (p = 0.021 < 0.05) and the majors of PHWs (p = 0.045 < 0.05); (2) In terms of the self-evaluation competency results of PHWs in township hospitals, seven among the 11 aspects were found to have significant differences in the three districts by the ANOVA test; (3) By adopting the t-test and ANOVA method, results of the relationship between the characteristics of PHWs and their competency scores showed that significant differences were found in the economic level (p = 0.000 < 0.05), age (p = 0.000 < 0.05), years of working (p = 0.000 < 0.05) and title of PHWs (p = 0.000 < 0.05); (4) Stepwise regression analysis was used to determine the impact factors of the competencies of PHWs in township hospitals, including the economic level (p = 0.000 < 0.001), years of working (p = 0.000 < 0.001), title (p = 0.001 < 0.005), and public health major (p = 0.007 < 0.01). The competencies of the township hospital staff in Chongqing Municipality (China), are generally insufficient, therefore, regulating the medical education and training skills of PHWs is crucial to improve the competencies of PHWs in the township hospitals of Chongqing Municipality. The results of this study can be mirrored in other areas of China.

Assessment of respondent acceptability of preference measures: discriminatory power of graphic positioning scale versus traditional scaling measures.

PubMed

Franic, Duska M; Pathak, Dev S

2003-01-01

The objective of this study was to compare discriminatory power of two different measures-graphic positioning scale (GPS) versus traditional scale (TS)-in assessing respondent acceptability of three preference measures: visual analog scale (VAS), standard gamble (SG), and willingness to pay (WTP). Two face-to-face interviews were conducted at least 1 week apart in a convenience sample of women aged 22 to 50 years with no history of breast cancer or cancer requiring chemotherapy. Study participation required completion of two surveys: one evaluating health preferences for an acute condition (chemotherapy-induced nausea and vomiting) and one evaluating a chronic condition (breast cancer). Data were collected from March 2000 to June 2000 at Ohio State University. Respondents were randomized to either GPS or TS surveys. Data analysis was a two-step process. First, a four-way multivariate repeated-measures analysis of variance (MANOVA) was conducted to assess respondent acceptability of three-preference metrics-VAS, SG, and WTP-in health-care decision making. Each of the four dependent variables, difficulty, clarity, reasonableness, and comfort in use in decision making, was measured on 9-point Likert scale. Second, a mixed design univariate analysis of variance (ANOVA) was performed for each dependent variable to optimize MANOVA analysis. Univariate ANOVAs, 2 x (2 x 3), were composed of three independent variables: assessment (GPS/TS), condition (acute and chronic), and preferences (VAS, SG, WTP). Of 126 respondents, 119 were usable and complete. MANOVA results showed (P <.05) for two main effects, condition (F4,114 = 6.375) and preferences (F8,110 = 9.290), and two significant interactions, condition x assessment (F4,114 = 3.421) and condition x preferences (F8,110 = 2.087). GPS has higher discriminatory power than TS in assessing respondent attitudes toward health preference measures. Results showed that respondents had more difficulty and less comfort when making decisions for chronic than for acute conditions. Results also show that respondents regard WTP as a more reasonable decision-making tool when assessing acute interventions in preference to SG and vice versa for chronic conditions. Of VAS, SG, and WTP methods, VAS was perceived as being the easiest to understand. These results can be explained by direct versus indirect comparisons made with GPS and TS methods, respectively.

Tensiomyographical responses to accelerometer loads in female collegiate basketball players.

PubMed

Peterson, Kyle D; Quiggle, Gabriela T

2017-12-01

The purpose of the present study was to characterise the relationship between relative versus absolute internal and external loads in collegiate basketball players throughout the course of a season. Five Division I basketball players wore triaxial accelerometers throughout the 2015-2016 season and were tensiomyographically assessed weekly. One-way repeated-measure analysis of variance (RM ANOVA) with least-significant-difference (LSD) pairwise comparisons was used to determine which absolute weekly loads were different across the season. Cohen's d was used to supplement the determination of meaningful relative load changes. Overall RM ANOVA models suggest absolute external load differences occurred (PlayerLoad™ F = 17.63; IMA™ F = 31.63). Two-way RM ANOVA models revealed main effect differences were revealed between muscle groups for Tc (F = 9.11) and Dm (F = 3.25). Meaningful relative load changes between weeks were observed for both external and internal. The present study observed that tensiomyography utilised as a tool to monitor internal load may be more suitable for detecting fatigue from relative external load changes versus absolute load attained. Limiting weekly training volume changes to ≤10% may maintain appropriate adaptation. Mediolateral plane IMA™ and adductor longus muscle group may be pertinent metrics when monitoring female collegiate basketball athletes.

Organizational and leadership perceptions assessment: opportunities and challenges using the Baldrige companion surveys.

PubMed

Colombo, Lisa M; Perla, Rocco J; Carifio, James; Bernhardt, Jean M; Slayton, Val W

2011-01-01

Combining the use of employee perception surveys with sound analytical techniques and models is critical to capturing high quality data from which effective decisions can be made in complex healthcare settings. This study used the Baldrige Award companion surveys with an analysis of variance (ANOVA) framework to identify discordant perceptions of hospital staff and leadership in the areas of customer focus, knowledge management, and results that were significant at the 0.05 and 0.01 levels. Senior leaders in the organization found the ANOVA framework helpful as they interpreted results from the Baldrige companion surveys and planned future improvement activities. During the execution of our study a number of difficulties and challenges arose that are not uncommon to survey administration in smaller settings, such as community hospitals, or in larger hospital settings with no research staff or research staff with relevant psychometric expertise. Our experience suggests that the Baldrige companion survey process would be enhanced by providing organizations with general guidance and protocols for optimal survey administration and data analysis. The purpose of this article is to outline the ANOVA model we used with the Baldrige companion surveys and to provide guidance related to the administration and analysis of these companion surveys for those that use them. © 2010 National Association for Healthcare Quality.

Sample entropy analysis for the estimating depth of anaesthesia through human EEG signal at different levels of unconsciousness during surgeries.

PubMed

Liu, Quan; Ma, Li; Fan, Shou-Zen; Abbod, Maysam F; Shieh, Jiann-Shing

2018-01-01

Estimating the depth of anaesthesia (DoA) in operations has always been a challenging issue due to the underlying complexity of the brain mechanisms. Electroencephalogram (EEG) signals are undoubtedly the most widely used signals for measuring DoA. In this paper, a novel EEG-based index is proposed to evaluate DoA for 24 patients receiving general anaesthesia with different levels of unconsciousness. Sample Entropy (SampEn) algorithm was utilised in order to acquire the chaotic features of the signals. After calculating the SampEn from the EEG signals, Random Forest was utilised for developing learning regression models with Bispectral index (BIS) as the target. Correlation coefficient, mean absolute error, and area under the curve (AUC) were used to verify the perioperative performance of the proposed method. Validation comparisons with typical nonstationary signal analysis methods (i.e., recurrence analysis and permutation entropy) and regression methods (i.e., neural network and support vector machine) were conducted. To further verify the accuracy and validity of the proposed methodology, the data is divided into four unconsciousness-level groups on the basis of BIS levels. Subsequently, analysis of variance (ANOVA) was applied to the corresponding index (i.e., regression output). Results indicate that the correlation coefficient improved to 0.72 ± 0.09 after filtering and to 0.90 ± 0.05 after regression from the initial values of 0.51 ± 0.17. Similarly, the final mean absolute error dramatically declined to 5.22 ± 2.12. In addition, the ultimate AUC increased to 0.98 ± 0.02, and the ANOVA analysis indicates that each of the four groups of different anaesthetic levels demonstrated significant difference from the nearest levels. Furthermore, the Random Forest output was extensively linear in relation to BIS, thus with better DoA prediction accuracy. In conclusion, the proposed method provides a concrete basis for monitoring patients' anaesthetic level during surgeries.

A novel synthesis of a new thorium (IV) metal organic framework nanostructure with well controllable procedure through ultrasound assisted reverse micelle method.

PubMed

Sargazi, Ghasem; Afzali, Daryoush; Mostafavi, Ali

2018-03-01

Reverse micelle (RM) and ultrasound assisted reverse micelle (UARM) were applied to the synthesis of novel thorium nanostructures as metal organic frameworks (MOFs). Characterization with different techniques showed that the Th-MOF sample synthesized by UARM method had higher thermal stability (354°C), smaller mean particle size (27nm), and larger surface area (2.02×10 3 m 2 /g). Besides, in this novel approach, the nucleation of crystals was found to carry out in a shorter time. The synthesis parameters of UARM method were designed by 2 k-1 factorial and the process control was systematically studied using analysis of variance (ANOVA) and response surface methodology (RSM). ANOVA showed that various factors, including surfactant content, ultrasound duration, temperature, ultrasound power, and interaction between these factors, considerably affected different properties of the Th-MOF samples. According to the 2 k-1 factorial design, the determination coefficient (R 2 ) of the model is 0.999, with no significant lack of fit. The F value of 5432, implied that the model was highly significant and adequate to represent the relationship between the responses and the independent variables, also the large R-adjusted value indicates a good relationship between the experimental data and the fitted model. RSM predicted that it would be possible to produce Th-MOF samples with the thermal stability of 407°C, mean particle size of 13nm, and surface area of 2.20×10 3 m 2 /g. The mechanism controlling the Th-MOF properties was considerably different from the conventional mechanisms. Moreover, the MOF sample synthesized using UARM exhibited higher capacity for nitrogen adsorption as a result of larger pore sizes. It is believed that the UARM method and systematic studies developed in the present work can be considered as a new strategy for their application in other nanoscale MOF samples. Copyright © 2017 Elsevier B.V. All rights reserved.

Functional vs. Traditional Analysis in Biomechanical Gait Data: An Alternative Statistical Approach

PubMed Central

Seeley, Matthew K.; Francom, Devin; Reese, C. Shane; Hopkins, J. Ty

2017-01-01

Abstract In human motion studies, discrete points such as peak or average kinematic values are commonly selected to test hypotheses. The purpose of this study was to describe a functional data analysis and describe the advantages of using functional data analyses when compared with a traditional analysis of variance (ANOVA) approach. Nineteen healthy participants (age: 22 ± 2 yrs, body height: 1.7 ± 0.1 m, body mass: 73 ± 16 kg) walked under two different conditions: control and pain+effusion. Pain+effusion was induced by injection of sterile saline into the joint capsule and hypertonic saline into the infrapatellar fat pad. Sagittal-plane ankle, knee, and hip joint kinematics were recorded and compared following injections using 2×2 mixed model ANOVAs and FANOVAs. The results of ANOVAs detected a condition × time interaction for the peak ankle (F1,18 = 8.56, p = 0.01) and hip joint angle (F1,18 = 5.77, p = 0.03), but did not for the knee joint angle (F1,18 = 0.36, p = 0.56). The functional data analysis, however, found several differences at initial contact (ankle and knee joint), in the mid-stance (each joint) and at toe off (ankle). Although a traditional ANOVA is often appropriate for discrete or summary data, in biomechanical applications, the functional data analysis could be a beneficial alternative. When using the functional data analysis approach, a researcher can (1) evaluate the entire data as a function, and (2) detect the location and magnitude of differences within the evaluated function. PMID:29339984

Functional vs. Traditional Analysis in Biomechanical Gait Data: An Alternative Statistical Approach.

PubMed

Park, Jihong; Seeley, Matthew K; Francom, Devin; Reese, C Shane; Hopkins, J Ty

2017-12-01

In human motion studies, discrete points such as peak or average kinematic values are commonly selected to test hypotheses. The purpose of this study was to describe a functional data analysis and describe the advantages of using functional data analyses when compared with a traditional analysis of variance (ANOVA) approach. Nineteen healthy participants (age: 22 ± 2 yrs, body height: 1.7 ± 0.1 m, body mass: 73 ± 16 kg) walked under two different conditions: control and pain+effusion. Pain+effusion was induced by injection of sterile saline into the joint capsule and hypertonic saline into the infrapatellar fat pad. Sagittal-plane ankle, knee, and hip joint kinematics were recorded and compared following injections using 2×2 mixed model ANOVAs and FANOVAs. The results of ANOVAs detected a condition × time interaction for the peak ankle (F1,18 = 8.56, p = 0.01) and hip joint angle (F1,18 = 5.77, p = 0.03), but did not for the knee joint angle (F1,18 = 0.36, p = 0.56). The functional data analysis, however, found several differences at initial contact (ankle and knee joint), in the mid-stance (each joint) and at toe off (ankle). Although a traditional ANOVA is often appropriate for discrete or summary data, in biomechanical applications, the functional data analysis could be a beneficial alternative. When using the functional data analysis approach, a researcher can (1) evaluate the entire data as a function, and (2) detect the location and magnitude of differences within the evaluated function.

Functional vs. Traditional Analysis in Biomechanical Gait Data: An Alternative Statistical Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, Jihong; Seeley, Matthew K.; Francom, Devin

In human motion studies, discrete points such as peak or average kinematic values are commonly selected to test hypotheses. The purpose of this study was to describe a functional data analysis and describe the advantages of using functional data analyses when compared with a traditional analysis of variance (ANOVA) approach. Nineteen healthy participants (age: 22 ± 2 yrs, body height: 1.7 ± 0.1 m, body mass: 73 ± 16 kg) walked under two different conditions: control and pain+effusion. Pain+effusion was induced by injection of sterile saline into the joint capsule and hypertonic saline into the infrapatellar fat pad. Sagittal-plane ankle,more » knee, and hip joint kinematics were recorded and compared following injections using 2×2 mixed model ANOVAs and FANOVAs. The results of ANOVAs detected a condition × time interaction for the peak ankle (F1,18 = 8.56, p = 0.01) and hip joint angle (F1,18 = 5.77, p = 0.03), but did not for the knee joint angle (F1,18 = 0.36, p = 0.56). The functional data analysis, however, found several differences at initial contact (ankle and knee joint), in the mid-stance (each joint) and at toe off (ankle). Although a traditional ANOVA is often appropriate for discrete or summary data, in biomechanical applications, the functional data analysis could be a beneficial alternative. Thus when using the functional data analysis approach, a researcher can (1) evaluate the entire data as a function, and (2) detect the location and magnitude of differences within the evaluated function.« less

Functional vs. Traditional Analysis in Biomechanical Gait Data: An Alternative Statistical Approach

DOE PAGES

Park, Jihong; Seeley, Matthew K.; Francom, Devin; ...

2017-12-28

In human motion studies, discrete points such as peak or average kinematic values are commonly selected to test hypotheses. The purpose of this study was to describe a functional data analysis and describe the advantages of using functional data analyses when compared with a traditional analysis of variance (ANOVA) approach. Nineteen healthy participants (age: 22 ± 2 yrs, body height: 1.7 ± 0.1 m, body mass: 73 ± 16 kg) walked under two different conditions: control and pain+effusion. Pain+effusion was induced by injection of sterile saline into the joint capsule and hypertonic saline into the infrapatellar fat pad. Sagittal-plane ankle,more » knee, and hip joint kinematics were recorded and compared following injections using 2×2 mixed model ANOVAs and FANOVAs. The results of ANOVAs detected a condition × time interaction for the peak ankle (F1,18 = 8.56, p = 0.01) and hip joint angle (F1,18 = 5.77, p = 0.03), but did not for the knee joint angle (F1,18 = 0.36, p = 0.56). The functional data analysis, however, found several differences at initial contact (ankle and knee joint), in the mid-stance (each joint) and at toe off (ankle). Although a traditional ANOVA is often appropriate for discrete or summary data, in biomechanical applications, the functional data analysis could be a beneficial alternative. Thus when using the functional data analysis approach, a researcher can (1) evaluate the entire data as a function, and (2) detect the location and magnitude of differences within the evaluated function.« less

Improvement of the quality of work in a biochemistry laboratory via measurement system analysis.

PubMed

Chen, Ming-Shu; Liao, Chen-Mao; Wu, Ming-Hsun; Lin, Chih-Ming

2016-10-31

An adequate and continuous monitoring of operational variations can effectively reduce the uncertainty and enhance the quality of laboratory reports. This study applied the evaluation rule of the measurement system analysis (MSA) method to estimate the quality of work conducted in a biochemistry laboratory. Using the gauge repeatability & reproducibility (GR&R) approach, variations in quality control (QC) data among medical technicians in conducting measurements of five biochemical items, namely, serum glucose (GLU), aspartate aminotransferase (AST), uric acid (UA), sodium (Na) and chloride (Cl), were evaluated. The measurements of the five biochemical items showed different levels of variance among the different technicians, with the variances in GLU measurements being higher than those for the other four items. The ratios of precision-to-tolerance (P/T) for Na, Cl and GLU were all above 0.5, implying inadequate gauge capability. The product variation contribution of Na was large (75.45% and 31.24% in normal and abnormal QC levels, respectively), which showed that the impact of insufficient usage of reagents could not be excluded. With regard to reproducibility, high contributions (of more than 30%) of variation for the selected items were found. These high operator variation levels implied that the possibility of inadequate gauge capacity could not be excluded. The analysis of variance (ANOVA) of GR&R showed that the operator variations in GLU measurements were significant (F=5.296, P=0.001 in the normal level and F=3.399, P=0.015 in the abnormal level, respectively). In addition to operator variations, product variations of Na were also significant for both QC levels. The heterogeneity of variance for the five technicians showed significant differences for the Na and Cl measurements in the normal QC level. The accuracy of QC for five technicians was identified for further operational improvement. This study revealed that MSA can be used to evaluate product and personnel errors and to improve the quality of work in a biochemical laboratory through proper corrective actions.

Comparative study between EDXRF and ASTM E572 methods using two-way ANOVA

NASA Astrophysics Data System (ADS)

Krummenauer, A.; Veit, H. M.; Zoppas-Ferreira, J.

2018-03-01

Comparison with reference method is one of the necessary requirements for the validation of non-standard methods. This comparison was made using the experiment planning technique with two-way ANOVA. In ANOVA, the results obtained using the EDXRF method, to be validated, were compared with the results obtained using the ASTM E572-13 standard test method. Fisher's tests (F-test) were used to comparative study between of the elements: molybdenum, niobium, copper, nickel, manganese, chromium and vanadium. All F-tests of the elements indicate that the null hypothesis (Ho) has not been rejected. As a result, there is no significant difference between the methods compared. Therefore, according to this study, it is concluded that the EDXRF method was approved in this method comparison requirement.

Virtual Reality simulator for dental anesthesia training in the inferior alveolar nerve block.

PubMed

Corrêa, Cléber Gimenez; Machado, Maria Aparecida de Andrade Moreira; Ranzini, Edith; Tori, Romero; Nunes, Fátima de Lourdes Santos

2017-01-01

This study shows the development and validation of a dental anesthesia-training simulator, specifically for the inferior alveolar nerve block (IANB). The system developed provides the tactile sensation of inserting a real needle in a human patient, using Virtual Reality (VR) techniques and a haptic device that can provide a perceived force feedback in the needle insertion task during the anesthesia procedure. To simulate a realistic anesthesia procedure, a Carpule syringe was coupled to a haptic device. The Volere method was used to elicit requirements from users in the Dentistry area; Repeated Measures Two-Way ANOVA (Analysis of Variance), Tukey post-hoc test and averages for the results' analysis. A questionnaire-based subjective evaluation method was applied to collect information about the simulator, and 26 people participated in the experiments (12 beginners, 12 at intermediate level, and 2 experts). The questionnaire included profile, preferences (number of viewpoints, texture of the objects, and haptic device handler), as well as visual (appearance, scale, and position of objects) and haptic aspects (motion space, tactile sensation, and motion reproduction). The visual aspect was considered appropriate and the haptic feedback must be improved, which the users can do by calibrating the virtual tissues' resistance. The evaluation of visual aspects was influenced by the participants' experience, according to ANOVA test (F=15.6, p=0.0002, with p<0.01). The user preferences were the simulator with two viewpoints, objects with texture based on images and the device with a syringe coupled to it. The simulation was considered thoroughly satisfactory for the anesthesia training, considering the needle insertion task, which includes the correct insertion point and depth, as well as the perception of tissues resistances during the insertion.

Fabrication and Evaluation of Bis-GMA/TEGDMA Dental Resins/Composites Containing Nano Fibrillar Silicate

PubMed Central

Tian, Ming; Gao, Yi; Liu, Yi; Liao, Yiliang; Hedin, Nyle E.; Fong, Hao

2008-01-01

Objective To investigate the reinforcement of Bis-GMA/TEGDMA dental resins (without conventional glass filler) and composites (with conventional glass filler) with various mass fractions of nano fibrillar silicate (FS). Methods Three dispersion methods were studied to separate the silanized FS as nano-scaled single crystals and uniformly distribute them into dental matrices. The photo-curing behaviors of the Bis-GMA/TEGDMA/FS resins were monitored in situ by RT-NIR to study the photopolymerization rate and the vinyl double bond conversion. Mechanical properties (flexural strength, elastic modulus and work of fracture) of the nano FS reinforced resins/composites were tested, and Analysis of Variance (ANOVA) was used for the statistical analysis of the acquired data. The morphology of nano FS and the representative fracture surfaces of its reinforced resins/composites were examined by SEM/TEM. Results Impregnation of small mass fractions (1 % and 2.5 %) of nano FS into Bis-GMA/TEGDMA (50/50 mass ratio) dental resins/composites improved the mechanical properties substantially. Larger mass fraction of impregnation (7.5 %), however, did not further improve the mechanical properties (one way ANOVA, P > 0.05) and may even reduce the mechanical properties. The high degree of separation and uniform distribution of nano FS into dental resins/composites was a challenge. Impregnation of nano FS into dental resins/composites could result in two opposite effects: a reinforcing effect due to the highly separated and uniformly distributed nano FS single crystals, or a weakening effect due to the formation of FS agglomerates/particles. Significance Uniform distribution of highly separated nano FS single crystals into dental resins/composites could significantly improve the mechanical properties of the resins/composites. PMID:17572485

Community trees: Identifying codiversification in the Páramo dipteran community.

PubMed

Carstens, Bryan C; Gruenstaeudl, Michael; Reid, Noah M

2016-05-01

Groups of codistributed species that responded in a concerted manner to environmental events are expected to share patterns of evolutionary diversification. However, the identification of such groups has largely been based on qualitative, post hoc analyses. We develop here two methods (posterior predictive simulation [PPS], Kuhner-Felsenstein [K-F] analysis of variance [ANOVA]) for the analysis of codistributed species that, given a group of species with a shared pattern of diversification, allow empiricists to identify those taxa that do not codiversify (i.e., "outlier" species). The identification of outlier species makes it possible to jointly estimate the evolutionary history of co-diversifying taxa. To evaluate the approaches presented here, we collected data from Páramo dipterans, identified outlier species, and estimated a "community tree" from species that are identified as having codiversified. Our results demonstrate that dipteran communities from different Páramo habitats in the same mountain range are more closely related than communities in other ranges. We also conduct simulation testing to evaluate this approach. Results suggest that our approach provides a useful addition to comparative phylogeographic methods, while identifying aspects of the analysis that require careful interpretation. In particular, both the PPS and K-F ANOVA perform acceptably when there are one or two outlier species, but less so as the number of outliers increases. This is likely a function of the corresponding degradation of the signal of community divergence; without a strong signal from a codiversifying community, there is no dominant pattern from which to detect an outlier species. For this reason, both the magnitude of K-F distance distribution and outside knowledge about the phylogeographic history of each putative member of the community should be considered when interpreting the results. © 2016 The Author(s). Evolution © 2016 The Society for the Study of Evolution.

Relationship between Career Motivation and Perceived Spiritual Leadership in Health Professional Educators: A Correlational Study in Iran

PubMed Central

Sadeghifar, Jamil; Bahadori, Mohammadkarim; Baldacchino, Donia; Raadabadi, Mehdi; Jafari, Mehdi

2014-01-01

Background and Aims: Career motivation in university educators through efficient ways and appropriate with the educational system, is considered one of the important factors affecting education of students and their competence. This study aimed to determine the relationship between career motivation and spiritual leadership among a university of medical sciences in the west, Iran. Methods: This descriptive, cross-sectional correlation study was conducted among the university educators of medical sciences in the west, Iran in 2012. All of the educators (N=230) were selected and recruited according to census method. The data were collected by two established self-completed questionnaires on spiritual leadership (SL) and career motivation. Data were analyzed statistically by parametric tests: Pearson correlation, independent student t-test and one-way analysis of variance (ANOVA). Results: The Pearson correlation test identified a significant relationship between educators’ career motivation and vision, altruistic love, hope/faith, meaning/calling and membership dimensions of spiritual leadership (p<0.05). The independent t-test detected a significant relationship between the ‘hope/faith’ (p=0.04) and organizational commitment (p=0.004) dimensions and the gender of educators. ANOVA revealed significant differences in educators’ years of work experience and their overall career motivation (p=0.003) and the dimension of ‘membership’ (p<0.04). A significant relationship was found in ‘altruistic love’ and ‘Hope/faith’, and the educators’ academic rank place in the university (p=0.03). Also a significant relationship was found in ‘vision’ (p=0.03) and ‘altruistic love’ (p=0.002) and ‘membership’ (p=0.04) dimensions, and the type of faculty. Conclusion: The results indicate that the dimensions of existence of spiritual leadership may have a positive relationship with educators’ career motivation. PMID:24576374

The assessment of a structured online formative assessment program: a randomised controlled trial

PubMed Central

2014-01-01

Background Online formative assessment continues to be an important area of research and methods which actively engage the learner and provide useful learning outcomes are of particular interest. This study reports on the outcomes of a two year study of medical students using formative assessment tools. Method The study was conducted over two consecutive years using two different strategies for engaging students. The Year 1 strategy involved voluntary use of the formative assessment tool by 129 students. In Year 2, a second cohort of 130 students was encouraged to complete the formative assessment by incorporating summative assessment elements into it. Outcomes from pre and post testing students around the formative assessment intervention were used as measures of learning. To compare improvement scores between the two years a two-way Analysis of Variance (ANOVA) model was fitted to the data. Results The ANOVA model showed that there was a significant difference in improvement scores between students in the two years (mean improvement percentage 19% vs. 38.5%, p < 0.0001). Students were more likely to complete formative assessment items if they had a summative component. In Year 2, the time spent using the formative assessment tool had no impact on student improvement, nor did the number of assessment items completed. Conclusion The online medium is a valuable learning resource, capable of providing timely formative feedback and stimulating student-centered learning. However the production of quality content is a time-consuming task and careful consideration must be given to the strategies employed to ensure its efficacy. Course designers should consider the potential positive impact summative components to formative assessment may have on student engagement and outcomes. PMID:24400883

Volume analysis of heat-induced cracks in human molars: A preliminary study

PubMed Central

Sandholzer, Michael A.; Baron, Katharina; Heimel, Patrick; Metscher, Brian D.

2014-01-01

Context: Only a few methods have been published dealing with the visualization of heat-induced cracks inside bones and teeth. Aims: As a novel approach this study used nondestructive X-ray microtomography (micro-CT) for volume analysis of heat-induced cracks to observe the reaction of human molars to various levels of thermal stress. Materials and Methods: Eighteen clinically extracted third molars were rehydrated and burned under controlled temperatures (400, 650, and 800°C) using an electric furnace adjusted with a 25°C increase/min. The subsequent high-resolution scans (voxel-size 17.7 μm) were made with a compact micro-CT scanner (SkyScan 1174). In total, 14 scans were automatically segmented with Definiens XD Developer 1.2 and three-dimensional (3D) models were computed with Visage Imaging Amira 5.2.2. The results of the automated segmentation were analyzed with an analysis of variance (ANOVA) and uncorrected post hoc least significant difference (LSD) tests using Statistical Package for Social Sciences (SPSS) 17. A probability level of P < 0.05 was used as an index of statistical significance. Results: A temperature-dependent increase of heat-induced cracks was observed between the three temperature groups (P < 0.05, ANOVA post hoc LSD). In addition, the distributions and shape of the heat-induced changes could be classified using the computed 3D models. Conclusion: The macroscopic heat-induced changes observed in this preliminary study correspond with previous observations of unrestored human teeth, yet the current observations also take into account the entire microscopic 3D expansions of heat-induced cracks within the dental hard tissues. Using the same experimental conditions proposed in the literature, this study confirms previous results, adds new observations, and offers new perspectives in the investigation of forensic evidence. PMID:25125923

Lyophilized allografts without pre-treatment with glutaraldehyde are more suitable than cryopreserved allografts for pulmonary artery reconstruction

PubMed Central

Olmos-Zúãiga, J.R.; Jasso-Victoria, R.; Díaz-Martínez, N.E.; Gaxiola-Gaxiola, M.O.; Sotres-Vega, A.; Heras-Romero, Y.; Baltazares-Lipp, M.; Baltazares-Lipp, M.E.; Santillán-Doherty, P.; Hernández-Jiménez, C.

2015-01-01

Various methods are available for preservation of vascular grafts for pulmonary artery (PA) replacement. Lyophilization and cryopreservation reduce antigenicity and prevent thrombosis and calcification in vascular grafts, so both methods can be used to obtain vascular bioprostheses. We evaluated the hemodynamic, gasometric, imaging, and macroscopic and microscopic findings produced by PA reconstruction with lyophilized (LyoPA) grafts and cryopreserved (CryoPA) grafts in dogs. Eighteen healthy crossbred adult dogs of both sexes weighing between 18 and 20 kg were used and divided into three groups of six: group I, PA section and reanastomosis; group II, PA resection and reconstruction with LyoPA allograft; group III, PA resection and reconstruction with CryoPA allograft. Dogs were evaluated 4 weeks after surgery, and the status of the graft and vascular anastomosis were examined macroscopically and microscopically. No clinical, radiologic, or blood-gas abnormalities were observed during the study. The mean pulmonary artery pressure (MPAP) in group III increased significantly at the end of the study compared with baseline (P=0.02) and final [P=0.007, two-way repeat-measures analysis of variance (RM ANOVA)] values. Pulmonary vascular resistance of groups II and III increased immediately after reperfusion and also at the end of the study compared to baseline. The increase shown by group III vs group I was significant only if compared with after surgery and study end (P=0.016 and P=0.005, respectively, two-way RM ANOVA). Microscopically, permeability was reduced by ≤75% in group III. In conclusion, substitution of PAs with LyoPA grafts is technically feasible and clinically promising. PMID:26648092

Digital versus conventional techniques for pattern fabrication of implant-supported frameworks.

PubMed

Alikhasi, Marzieh; Rohanian, Ahmad; Ghodsi, Safoura; Kolde, Amin Mohammadpour

2018-01-01

The aim of this experimental study was to compare retention of frameworks cast from wax patterns fabricated by three different methods. Thirty-six implant analogs connected to one-piece abutments were divided randomly into three groups according to the wax pattern fabrication method ( n = 12). Computer-aided design/computer-aided manufacturing (CAD/CAM) milling machine, three-dimensional printer, and conventional technique were used for fabrication of waxing patterns. All laboratory procedures were performed by an expert-reliable technician to eliminate intra-operator bias. The wax patterns were cast, finished, and seated on related abutment analogs. The number of adjustment times was recorded and analyzed by Kruskal-Wallis test. Frameworks were cemented on the corresponding analogs with zinc phosphate cement and tensile resistance test was used to measure retention value. One-way analysis of variance (ANOVA) and post hoc Tukey tests were used for statistical analysis. Level of significance was set at P < 0.05. The mean retentive values of 680.36 ± 21.93 N, 440.48 ± 85.98 N, and 407.23 ± 67.48 N were recorded for CAD/CAM, rapid prototyping, and conventional group, respectively. One-way ANOVA test revealed significant differences among the three groups ( P < 0.001). The post hoc Tukey test showed significantly higher retention for CAD/CAM group ( P < 0.001), while there was no significant difference between the two other groups ( P = 0.54). CAD/CAM group required significantly more adjustments ( P < 0.001). CAD/CAM-fabricated wax patterns showed significantly higher retention for implant-supported cement-retained frameworks; this could be a valuable help when there are limitations in the retention of single-unit implant restorations.

Research, science and technology parks: A global comparison of best practices

NASA Astrophysics Data System (ADS)

Ruiz Villacres, Hugo D.

The purpose of this study was to determine if significant differences exist in the evaluation of effectiveness and efficiency between North American, European, and Asian research parks (RPs). Park directors and staff responded to 25 questions from the Survey for Research, Science and Technology Parks. Effectiveness was measured by director's perception of the RP's contribution to economic growth and job creation. Efficiency was evaluated by the interactions between local universities and research parks, assessment of the ecosystem's basic characteristics, and the culture of innovation in the ecosystem. A stratified sampling procedure from a population of 793 parks was used; analysis of variance (ANOVA) and multivariate analysis of variance (MANOVA) were used to test for significance. 130 RPs from three continents participated in this study. No significant differences were found in the evaluation of RPs' directors on effectiveness and efficiency of RPs.

Prediction of Cutting Force in Turning Process-an Experimental Approach

NASA Astrophysics Data System (ADS)

Thangarasu, S. K.; Shankar, S.; Thomas, A. Tony; Sridhar, G.

2018-02-01

This Paper deals with a prediction of Cutting forces in a turning process. The turning process with advanced cutting tool has a several advantages over grinding such as short cycle time, process flexibility, compatible surface roughness, high material removal rate and less environment problems without the use of cutting fluid. In this a full bridge dynamometer has been used to measure the cutting forces over mild steel work piece and cemented carbide insert tool for different combination of cutting speed, feed rate and depth of cut. The experiments are planned based on taguchi design and measured cutting forces were compared with the predicted forces in order to validate the feasibility of the proposed design. The percentage contribution of each process parameter had been analyzed using Analysis of Variance (ANOVA). Both the experimental results taken from the lathe tool dynamometer and the designed full bridge dynamometer were analyzed using Taguchi design of experiment and Analysis of Variance.

The Impact of Face Skin Tone vs. Face Symmetry on Perceived Facial Attractiveness.

PubMed

Vera Cruz, Germano

2018-01-01

The purpose of this study was to assess and compare the relative contribution of skin tone and symmetry on judgment of attractiveness regarding female faces. Two hundred and fifteen Mozambican adults were presented with a set of faces, and instructed to rate their degree of attractiveness along a continuous scale. Chi-square, factorial weight analyses and ANOVA were used to analyze the data. Face skin tone had a significant impact on the participants' attractiveness judgment of target faces. However, the target face skin tone contribution to the participants' attractiveness judgment (5% of the total variance) was much weaker than the contribution of the target face symmetry (85% of the total variance). These results imply that skin bleaching, common among Black people across sub-Saharan African countries, is not only dangerous to the health of those who practice it, but it is unlikely to make them appear much more attractive.

Analysis of tribological behaviour of zirconia reinforced Al-SiC hybrid composites using statistical and artificial neural network technique

NASA Astrophysics Data System (ADS)

Arif, Sajjad; Tanwir Alam, Md; Ansari, Akhter H.; Bilal Naim Shaikh, Mohd; Arif Siddiqui, M.

2018-05-01

The tribological performance of aluminium hybrid composites reinforced with micro SiC (5 wt%) and nano zirconia (0, 3, 6 and 9 wt%) fabricated through powder metallurgy technique were investigated using statistical and artificial neural network (ANN) approach. The influence of zirconia reinforcement, sliding distance and applied load were analyzed with test based on full factorial design of experiments. Analysis of variance (ANOVA) was used to evaluate the percentage contribution of each process parameters on wear loss. ANOVA approach suggested that wear loss be mainly influenced by sliding distance followed by zirconia reinforcement and applied load. Further, a feed forward back propagation neural network was applied on input/output date for predicting and analyzing the wear behaviour of fabricated composite. A very close correlation between experimental and ANN output were achieved by implementing the model. Finally, ANN model was effectively used to find the influence of various control factors on wear behaviour of hybrid composites.

Sequential experimental design based generalised ANOVA

NASA Astrophysics Data System (ADS)

Chakraborty, Souvik; Chowdhury, Rajib

2016-07-01

Over the last decade, surrogate modelling technique has gained wide popularity in the field of uncertainty quantification, optimization, model exploration and sensitivity analysis. This approach relies on experimental design to generate training points and regression/interpolation for generating the surrogate. In this work, it is argued that conventional experimental design may render a surrogate model inefficient. In order to address this issue, this paper presents a novel distribution adaptive sequential experimental design (DA-SED). The proposed DA-SED has been coupled with a variant of generalised analysis of variance (G-ANOVA), developed by representing the component function using the generalised polynomial chaos expansion. Moreover, generalised analytical expressions for calculating the first two statistical moments of the response, which are utilized in predicting the probability of failure, have also been developed. The proposed approach has been utilized in predicting probability of failure of three structural mechanics problems. It is observed that the proposed approach yields accurate and computationally efficient estimate of the failure probability.

Sequential experimental design based generalised ANOVA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chakraborty, Souvik, E-mail: csouvik41@gmail.com; Chowdhury, Rajib, E-mail: rajibfce@iitr.ac.in

Over the last decade, surrogate modelling technique has gained wide popularity in the field of uncertainty quantification, optimization, model exploration and sensitivity analysis. This approach relies on experimental design to generate training points and regression/interpolation for generating the surrogate. In this work, it is argued that conventional experimental design may render a surrogate model inefficient. In order to address this issue, this paper presents a novel distribution adaptive sequential experimental design (DA-SED). The proposed DA-SED has been coupled with a variant of generalised analysis of variance (G-ANOVA), developed by representing the component function using the generalised polynomial chaos expansion. Moreover,more » generalised analytical expressions for calculating the first two statistical moments of the response, which are utilized in predicting the probability of failure, have also been developed. The proposed approach has been utilized in predicting probability of failure of three structural mechanics problems. It is observed that the proposed approach yields accurate and computationally efficient estimate of the failure probability.« less

An investigation of thermal changes of various permanent dental cements.

PubMed

Duymus, Zeynep Yesil; Yilmaz, Baykal; Karaalioglu, F Osman

2009-05-01

The aim of this study was to investigate and compare the temperature rises which occurred during the setting reactions of different permanent cements used to lute fixed partial prosthodontics. In this study, four cements were used. They were mixed in three different proportions: according to manufacturers' recommendations, at doubled powder ratio, and at doubled liquid ratio. With a thermocouple, the temperature rises which occurred during the setting reactions were measured. For each proportion, the measurement was repeated five times such that a total of 60 measurements were done for the four different cements. Data were analyzed using analysis of variance (ANOVA). ANOVA results showed that cement type and the interaction between cement type and the powder-liquid ratio were statistically significant factors (p<0.001). Similarly, the powder-liquid ratio was a statistically significant (p<0.01) factor. Among the dental cements tested, zinc phosphate cement showed the highest temperature rise during setting reaction, whereas glass ionomer cement showed the lowest.

The effect of a family-based intervention with a cognitive-behavioral approach on elder abuse.

PubMed

Khanlary, Zahra; Maarefvand, Masoomeh; Biglarian, Akbar; Heravi-Karimooi, Majideh

2016-01-01

Elder abuse may become a health issue in developing countries, including Iran. The purpose of this investigation was to study the effectiveness of Family-Based Cognitive-Behavioral Social Work (FBCBSW) in reducing elder abuse. In a randomized clinical trial in Iran, 27 elders participated in intervention and control groups. The intervention groups received a five-session FBCBSW intervention and completed the Domestic-Elder-Abuse-Questionnaire (DEAQ), which evaluates elder abuse at baseline and follow-ups. Repeated measures of analysis of variance (ANOVA) and the Wilcoxon test were used to analyze the data. The repeated measures ANOVA revealed that FBCBSW was successful in reducing elder abuse. The Wilcoxon test indicated that emotional neglect, care neglect, financial neglect, curtailment of personal autonomy, psychological abuse, and financial abuse significantly decreased over time, but there was no statistically significant difference in physical abuse before and after the intervention. The findings from this study suggest that FBCBSW is a promising approach to reducing elder abuse and warrants further study with larger samples.

Optimisation of warpage on plastic injection moulding part using response surface methodology (RSM)

NASA Astrophysics Data System (ADS)

Miza, A. T. N. A.; Shayfull, Z.; Nasir, S. M.; Fathullah, M.; Rashidi, M. M.

2017-09-01

The warpage is often encountered which occur during injection moulding process of thin shell part depending the process condition. The statistical design of experiment method which are Integrating Finite Element (FE) Analysis, moldflow analysis and response surface methodology (RSM) are the stage of few ways in minimize the warpage values of x,y and z on thin shell plastic parts that were investigated. A battery cover of a remote controller is one of the thin shell plastic part that produced by using injection moulding process. The optimum process condition parameter were determined as to achieve the minimum warpage from being occur. Packing pressure, Cooling time, Melt temperature and Mould temperature are 4 parameters that considered in this study. A two full factorial experimental design was conducted in Design Expert of RSM analysis as to combine all these parameters study. FE analysis result gain from analysis of variance (ANOVA) method was the one of the important process parameters influenced warpage. By using RSM, a predictive response surface model for warpage data will be shown.

Optimization of Micro Metal Injection Molding By Using Grey Relational Grade

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ibrahim, M. H. I.; Precision Process Research Group, Dept. of Mechanical and Materials Engineering, Faculty of Engineering, Universiti Kebangsaan Malaysia; Muhamad, N.

2011-01-17

Micro metal injection molding ({mu}MIM) which is a variant of MIM process is a promising method towards near net-shape of metallic micro components of complex geometry. In this paper, {mu}MIM is applied to produce 316L stainless steel micro components. Due to highly stringent characteristic of {mu}MIM properties, the study has been emphasized on optimization of process parameter where Taguchi method associated with Grey Relational Analysis (GRA) will be implemented as it represents novel approach towards investigation of multiple performance characteristics. Basic idea of GRA is to find a grey relational grade (GRG) which can be used for the optimization conversionmore » from multi objectives case which are density and strength to a single objective case. After considering the form 'the larger the better', results show that the injection time(D) is the most significant followed by injection pressure(A), holding time(E), mold temperature(C) and injection temperature(B). Analysis of variance (ANOVA) is also employed to strengthen the significant of each parameter involved in this study.« less

The Persian developmental sentence scoring as a clinical measure of morphosyntax in children.

PubMed

Jalilevand, Nahid; Kamali, Mohammad; Modarresi, Yahya; Kazemi, Yalda

2016-01-01

Background: Developmental Sentence Scoring (DSS) was developed as a numerical measurement and a clinical method based on the morphosyntactic acquisition in the English language. The aim of this study was to develop a new numerical tool similar to DSS to assess the morphosyntactic abilities in Persian-speaking children. Methods: In this cross-sectional and comparative study, the language samples of 115 typically developing Persian-speaking children aged 30 - 65 months were audio recorded during the free play and picture description sessions. The Persian Developmental Sentence Score (PDSS) and the Mean Length of Utterance (MLU) were calculated. Pearson correlation and one - way Analysis of variance (ANOVA) were used for data analysis. Results: The correlation between PDSS and MLU in morphemes (convergent validity) was significant with a correlation coefficient of 0.97 (p< 0.001). The value Cronbach's Alpha (α= 0.79) in the grammatical categories and the split-half coefficient (0.86) indicated acceptable internal consistency reliability. Conclusion: The PDSS could be used as a reliable numerical measurement to estimate the syntactic development in Persian-speaking children.

Reporting Practices and Use of Quantitative Methods in Canadian Journal Articles in Psychology.

PubMed

Counsell, Alyssa; Harlow, Lisa L

2017-05-01

With recent focus on the state of research in psychology, it is essential to assess the nature of the statistical methods and analyses used and reported by psychological researchers. To that end, we investigated the prevalence of different statistical procedures and the nature of statistical reporting practices in recent articles from the four major Canadian psychology journals. The majority of authors evaluated their research hypotheses through the use of analysis of variance (ANOVA), t -tests, and multiple regression. Multivariate approaches were less common. Null hypothesis significance testing remains a popular strategy, but the majority of authors reported a standardized or unstandardized effect size measure alongside their significance test results. Confidence intervals on effect sizes were infrequently employed. Many authors provided minimal details about their statistical analyses and less than a third of the articles presented on data complications such as missing data and violations of statistical assumptions. Strengths of and areas needing improvement for reporting quantitative results are highlighted. The paper concludes with recommendations for how researchers and reviewers can improve comprehension and transparency in statistical reporting.

Optimization of reaction parameters of radiation induced grafting of 1-vinylimidazole onto poly(ethylene-co-tetraflouroethene) using response surface method

NASA Astrophysics Data System (ADS)

Nasef, Mohamed Mahmoud; Aly, Amgad Ahmed; Saidi, Hamdani; Ahmad, Arshad

2011-11-01

Radiation induced grafting of 1-vinylimidazole (1-VIm) onto poly(ethylene-co-tetraflouroethene) (ETFE) was investigated. The grafting parameters such as absorbed dose, monomer concentration, grafting time and temperature were optimized using response surface method (RSM). The Box-Behnken module available in the design expert software was used to investigate the effect of reaction conditions (independent parameters) varied in four levels on the degree of grafting ( G%) (response parameter). The model yielded a polynomial equation that relates the linear, quadratic and interaction effects of the independent parameters to the response parameter. The analysis of variance (ANOVA) was used to evaluate the results of the model and detect the significant values for the independent parameters. The optimum parameters to achieve a maximum G% were found to be monomer concentration of 55 vol%, absorbed dose of 100 kGy, time in the range of 14-20 h and a temperature of 61 °C. Fourier transform infrared (FTIR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) were used to investigate the properties of the obtained films and provide evidence for grafting.

The Persian developmental sentence scoring as a clinical measure of morphosyntax in children

PubMed Central

Jalilevand, Nahid; Kamali, Mohammad; Modarresi, Yahya; Kazemi, Yalda

2016-01-01

Background: Developmental Sentence Scoring (DSS) was developed as a numerical measurement and a clinical method based on the morphosyntactic acquisition in the English language. The aim of this study was to develop a new numerical tool similar to DSS to assess the morphosyntactic abilities in Persian-speaking children. Methods: In this cross-sectional and comparative study, the language samples of 115 typically developing Persian-speaking children aged 30 - 65 months were audio recorded during the free play and picture description sessions. The Persian Developmental Sentence Score (PDSS) and the Mean Length of Utterance (MLU) were calculated. Pearson correlation and one – way Analysis of variance (ANOVA) were used for data analysis. Results: The correlation between PDSS and MLU in morphemes (convergent validity) was significant with a correlation coefficient of 0.97 (p< 0.001). The value Cronbach's Alpha (α= 0.79) in the grammatical categories and the split-half coefficient (0.86) indicated acceptable internal consistency reliability. Conclusion: The PDSS could be used as a reliable numerical measurement to estimate the syntactic development in Persian-speaking children. PMID:28210600

Comparison of surface roughness and chip characteristics obtained under different modes of lubrication during hard turning of AISI H13 tool work steel.

NASA Astrophysics Data System (ADS)

Raj, Anil; Wins, K. Leo Dev; Varadarajan, A. S.

2016-09-01

Surface roughness is one of the important parameters, which not only affects the service life of a component but also serves as a good index of machinability. Near Dry Machining, methods (NDM) are considered as sustainable alternative for workshops trying to bring down their dependence on cutting fluids and the hazards associated with their indiscriminate usage. The present work presents a comparison of the surface roughness and chip characteristics during hard turning of AISI H13 tool work steel using hard metal inserts under two popular NDM techniques namely the minimal fluid application and the Minimum Quantity Lubrication technique(MQL) using an experiment designed based on Taguchi's techniques. The statistical method of analysis of variance (ANOVA) was used to determine the relative significance of input parameters consisting of cutting speed, feed and depth of cut on the attainable surface finish and the chip characteristics. It was observed that the performance during minimal fluid application was better than that during MQL application.

Homogeneity study of a corn flour laboratory reference material candidate for inorganic analysis.

PubMed

Dos Santos, Ana Maria Pinto; Dos Santos, Liz Oliveira; Brandao, Geovani Cardoso; Leao, Danilo Junqueira; Bernedo, Alfredo Victor Bellido; Lopes, Ricardo Tadeu; Lemos, Valfredo Azevedo

2015-07-01

In this work, a homogeneity study of a corn flour reference material candidate for inorganic analysis is presented. Seven kilograms of corn flour were used to prepare the material, which was distributed among 100 bottles. The elements Ca, K, Mg, P, Zn, Cu, Fe, Mn and Mo were quantified by inductively coupled plasma optical emission spectrometry (ICP OES) after acid digestion procedure. The method accuracy was confirmed by analyzing the rice flour certified reference material, NIST 1568a. All results were evaluated by analysis of variance (ANOVA) and principal component analysis (PCA). In the study, a sample mass of 400mg was established as the minimum mass required for analysis, according to the PCA. The between-bottle test was performed by analyzing 9 bottles of the material. Subsamples of a single bottle were analyzed for the within-bottle test. No significant differences were observed for the results obtained through the application of both statistical methods. This fact demonstrates that the material is homogeneous for use as a laboratory reference material. Copyright © 2015 Elsevier Ltd. All rights reserved.

Biostatistics Series Module 3: Comparing Groups: Numerical Variables.

PubMed

Hazra, Avijit; Gogtay, Nithya

2016-01-01

Numerical data that are normally distributed can be analyzed with parametric tests, that is, tests which are based on the parameters that define a normal distribution curve. If the distribution is uncertain, the data can be plotted as a normal probability plot and visually inspected, or tested for normality using one of a number of goodness of fit tests, such as the Kolmogorov-Smirnov test. The widely used Student's t-test has three variants. The one-sample t-test is used to assess if a sample mean (as an estimate of the population mean) differs significantly from a given population mean. The means of two independent samples may be compared for a statistically significant difference by the unpaired or independent samples t-test. If the data sets are related in some way, their means may be compared by the paired or dependent samples t-test. The t-test should not be used to compare the means of more than two groups. Although it is possible to compare groups in pairs, when there are more than two groups, this will increase the probability of a Type I error. The one-way analysis of variance (ANOVA) is employed to compare the means of three or more independent data sets that are normally distributed. Multiple measurements from the same set of subjects cannot be treated as separate, unrelated data sets. Comparison of means in such a situation requires repeated measures ANOVA. It is to be noted that while a multiple group comparison test such as ANOVA can point to a significant difference, it does not identify exactly between which two groups the difference lies. To do this, multiple group comparison needs to be followed up by an appropriate post hoc test. An example is the Tukey's honestly significant difference test following ANOVA. If the assumptions for parametric tests are not met, there are nonparametric alternatives for comparing data sets. These include Mann-Whitney U-test as the nonparametric counterpart of the unpaired Student's t-test, Wilcoxon signed-rank test as the counterpart of the paired Student's t-test, Kruskal-Wallis test as the nonparametric equivalent of ANOVA and the Friedman's test as the counterpart of repeated measures ANOVA.

One-to-one teaching with pictures--flashcard health education for British Asians with diabetes.

PubMed Central

Hawthorne, K; Tomlinson, S

1997-01-01

BACKGROUND: Type 2 diabetes is up to four times more common in British Asians, but they know little about its management and complications. AIM: To design and evaluate a structured pictorial teaching programme for Pakistani Moslem patients in Manchester with type 2 diabetes. METHOD: A randomized controlled trial of pictorial flashcard one-to-one education in 201 patients attending a hospital outpatient clinic or diabetic clinics in ten general practices in Manchester. Patients' knowledge, self-caring skills and attitudes to diabetes were measured on four topics before the structured teaching, and compared with results six months later. RESULTS: All parameters of knowledge were increased in the study group; for example, percentage scores for correctly identifying different food values increased from 57% to 71% (Analysis of Variance (ANOVA) adjusted difference +11.8%) and knowledge of one diabetic complication from 18% to 78%. Self-caring behaviour improved, with 92% of patients doing regular glucose tests at six months compared with 63% at the start. Attitudinal views were more resistant to change, with patients still finding it hard to choose suitable foods at social occasions. Haemoglobin A1c control improved by 0.34% over six months (ANOVA adjusted difference, 95% CI -0.8% to +0.1%). CONCLUSION: It is concluded that this health education programme can empower Asian diabetics to take control of their diets, learn to monitor and interpret glucose results, and understand the implications of poor glycaemic control for diabetic complications. PMID:9219407

The Changes of Tear Status after Conventional and Wavefront-Guided IntraLASIK

PubMed Central

Foo, Say Kiang; Kaur, Sharanjeet; Abd Manan, Faudziah; Low, Aloysius Joseph

2011-01-01

Background: IntraLASIK is a LASIK surgery that involved IntraLase femtosecond laser for the corneal flap creating. The objective of this research was to investigate and compare the changes in tear status at 1 and 3 months after undergoing conventional IntraLASIK with Bausch & Lomb PlanoScan (PS) algorithm, Bausch & Lomb Zyoptix Tissue Saving (ZTS) algorithm, and wavefront-guided (WG) IntraLASIK with VISX CustomVue. Methods: Tear status of 36 patients who were divided into 3 groups depending on the type of IntraLASIK they underwent (PS, n = 13; ZTS, n = 9; WG, n = 14) was evaluated. Tear status was determined by classifying the category of the thickness of pre-corneal tear lipid layer, non-invasive tear break-up time, and tear meniscus height. Repeated measures analysis of variance (ANOVA) and one way ANOVA were used for the statistical analyses. Results: The category of the thickness of tear lipid layer, non-invasive tear break up time and tear meniscus height were neither significantly changed after IntraLASIK for all groups nor showed significant difference among groups at 1 and 3 months post-IntraLASIK (P > 0.05). Blinking rate and palpebral aperture also had no significant changed after IntraLASIK. Conclusion: Both conventional (PS and ZTS) and WG IntraLASIK did not affect tear status up to 3 months post-IntraLASIK. WG IntraLASIK did not show superiority in preserving tear status 1 and 3 months post-surgery compared with conventional IntraLASIK. PMID:22135584

48-hours administration of fenoterol in spontaneous preterm labor - does it affect fetal preload?

PubMed

Grzesiak, Mariusz; Forys, Sebastian; Sobczak, Malgorzata; Ahmed, Rehana B; Wilczynski, Jan

2013-01-01

to investigate whether any changes in the preload index (PLI) occur within the first 48 hours of fenoterol intravenous tocolysis. Doppler evaluation of placental and fetal circulation was performed in 36 pregnant women prior to fenoterol administration and after 24/48 hours. Measurements were obtained from a longitudinal section of the inferior vena cava (IVC) and preload index was calculated. To determine changes over time, an all study variable analysis of variance (ANOVA) for repeated measurements, followed by Tukey-Kramer's multiple comparison test was used. The effects of additional clinical covariates were checked. The maternal heart rate values were significantly increased after 24 hours and 48 hours in comparison to pre-treatment values. No significant changes in fetal heart rate were observed during treatment. The fetal IVC PLI values were significantly reduced after 24 hours and 48 hours of treatment. The increase in PLI values when comparing 24 and 48 hours results were not statistically significant. These observations were consistent with ANOVA post-hoc analysis. 48 hours intravenous administration of fenoterol appears not to alter inferior vena cava blood flow by itself. The reduction in PLI values may reflect lower fetal preload conditions during the course of successful tocolytic treatment. Therefore, Doppler IVC PLI measurement should be considered as a possible additional assessment method of effectiveness of treatment. However, other Doppler venous blood flow parameters should be assessed to confirm the results and clarify whether maternal corticosteroids administration may be interfering with the results.

Do online gossipers promote brands?

PubMed

Okazaki, Shintaro; Rubio, Natalia; Campo, Sara

2013-02-01

Online gossip has been recognized as small talk on social networking sites (SNSs) that influences consumer behavior, but little attention has been paid to its role. This study makes three theoretical predictions: (a) propensity to gossip online leads to greater information value, entertainment value, and friendship value; (b) upon exposure to a high-involvement product, online gossipers are more willing to spread such information through electronic word-of-mouth (eWOM) in search of prestige or fame as a knowledge expert; and (c) this tendency will be more pronounced when they are connected with strong ties (rather than weak ties) and belong to a large network (rather than a small network). An experimental survey was conducted with a scenario method. In total, 818 general consumers participated in the survey. A multivariate analysis of variance (ANOVA) provides empirical support for prediction (1). With regard to predictions (2) and (3), a series of three-way and two-way between-subjective ANOVAs were performed. When a high-involvement product is promoted, gossipers, rather than nongossipers, are more willing to participate in eWOM on an SNS. Furthermore, a significant interaction effect indicates that online gossipers' willingness to particiapte in eWOM would be more pronounced if they belonged to a large network rather than a small network. However, when a low-involvement product is promoted, no interaction effect is found between online gossip and network size. In closing, theoretical and managerial implications are discussed, while important limitations are recognized.

Do Online Gossipers Promote Brands?

PubMed Central

Rubio, Natalia; Campo, Sara

2013-01-01

Abstract Online gossip has been recognized as small talk on social networking sites (SNSs) that influences consumer behavior, but little attention has been paid to its role. This study makes three theoretical predictions: (a) propensity to gossip online leads to greater information value, entertainment value, and friendship value; (b) upon exposure to a high-involvement product, online gossipers are more willing to spread such information through electronic word-of-mouth (eWOM) in search of prestige or fame as a knowledge expert; and (c) this tendency will be more pronounced when they are connected with strong ties (rather than weak ties) and belong to a large network (rather than a small network). An experimental survey was conducted with a scenario method. In total, 818 general consumers participated in the survey. A multivariate analysis of variance (ANOVA) provides empirical support for prediction (1). With regard to predictions (2) and (3), a series of three-way and two-way between-subjective ANOVAs were performed. When a high-involvement product is promoted, gossipers, rather than nongossipers, are more willing to participate in eWOM on an SNS. Furthermore, a significant interaction effect indicates that online gossipers' willingness to particiapte in eWOM would be more pronounced if they belonged to a large network rather than a small network. However, when a low-involvement product is promoted, no interaction effect is found between online gossip and network size. In closing, theoretical and managerial implications are discussed, while important limitations are recognized. PMID:23276259

NOEC and LOEC as merely concessive expedients: two unambiguous alternatives and some criteria to maximize the efficiency of dose-response experimental designs.

PubMed

Murado, M A; Prieto, M A

2013-09-01

NOEC and LOEC (no and lowest observed effect concentrations, respectively) are toxicological concepts derived from analysis of variance (ANOVA), a not very sensitive method that produces ambiguous results and does not provide confidence intervals (CI) of its estimates. For a long time, despite the abundant criticism that such concepts have raised, the field of the ecotoxicology is reticent to abandon them (two possible reasons will be discussed), adducing the difficulty of clear alternatives. However, this work proves that a debugged dose-response (DR) modeling, through explicit algebraic equations, enables two simple options to accurately calculate the CI of substantially lower doses than NOEC. Both ANOVA and DR analyses are affected by the experimental error, response profile, number of observations and experimental design. The study of these effects--analytically complex and experimentally unfeasible--was carried out using systematic simulations with realistic data, including different error levels. Results revealed the weakness of NOEC and LOEC notions, confirmed the feasibility of the proposed alternatives and allowed to discuss the--often violated--conditions that minimize the CI of the parametric estimates from DR assays. In addition, a table was developed providing the experimental design that minimizes the parametric CI for a given set of working conditions. This makes possible to reduce the experimental effort and to avoid the inconclusive results that are frequently obtained from intuitive experimental plans. Copyright © 2013 Elsevier B.V. All rights reserved.

Effectiveness of probiotic, chlorhexidine and fluoride mouthwash against Streptococcus mutans – Randomized, single-blind, in vivo study

PubMed Central

Jothika, Mohan; Vanajassun, P. Pranav; Someshwar, Battu

2015-01-01

Aim: To determine the short-term efficiency of probiotic, chlorhexidine, and fluoride mouthwashes on plaque Streptococcus mutans level at four periodic intervals. Materials and Methods: This was a single-blind, randomized control study in which each subject was tested with only one mouthwash regimen. Fifty-two healthy qualified adult patients were selected randomly for the study and were divided into the following groups: group 1- 10 ml of distilled water, group 2- 10 ml of 0.2% chlorhexidine mouthwash, group 3- 10 ml of 500 ppm F/400 ml sodium fluoride mouthwash, and group 4- 10 ml of probiotic mouthwash. Plaque samples were collected from the buccal surface of premolars and molars in the maxillary quadrant. Sampling procedure was carried out by a single examiner after 7 days, 14 days, and 30 days, respectively, after the use of the mouthwash. All the samples were subjected to microbiological analysis and statistically analyzed with one-way analysis of variance (ANOVA) and post-hoc test. Results: One-way ANOVA comparison among groups 2, 3, and 4 showed no statistical significance, whereas group 1 showed statistically significant difference when compared with groups 2, 3, and 4 at 7th, 14th, and 30th day. Conclusion: Chlorhexidine, sodium fluoride, and probiotic mouthwashes reduce plaque S. mutans levels. Probiotic mouthwash is effective and equivalent to chlorhexidine and sodium fluoride mouthwashes. Thus, probiotic mouthwash can also be considered as an effective oral hygiene regimen. PMID:25984467

Assessment of the mechanics of a tissue-engineered rat trachea in an image-processing environment.

PubMed

Silva, Thiago Henrique Gomes da; Pazetti, Rogerio; Aoki, Fabio Gava; Cardoso, Paulo Francisco Guerreiro; Valenga, Marcelo Henrique; Deffune, Elenice; Evaristo, Thaiane; Pêgo-Fernandes, Paulo Manuel; Moriya, Henrique Takachi

2014-07-01

Despite the recent success regarding the transplantation of tissue-engineered airways, the mechanical properties of these grafts are not well understood. Mechanical assessment of a tissue-engineered airway graft before implantation may be used in the future as a predictor of function. The aim of this preliminary work was to develop a noninvasive image-processing environment for the assessment of airway mechanics. Decellularized, recellularized and normal tracheas (groups DECEL, RECEL, and CONTROL, respectively) immersed in Krebs-Henseleit solution were ventilated by a small-animal ventilator connected to a Fleisch pneumotachograph and two pressure transducers (differential and gauge). A camera connected to a stereomicroscope captured images of the pulsation of the trachea before instillation of saline solution and after instillation of Krebs-Henseleit solution, followed by instillation with Krebs-Henseleit with methacholine 0.1 M (protocols A, K and KMCh, respectively). The data were post-processed with computer software and statistical comparisons between groups and protocols were performed. There were statistically significant variations in the image measurements of the medial region of the trachea between the groups (two-way analysis of variance [ANOVA], p<0.01) and of the proximal region between the groups and protocols (two-way ANOVA, p<0.01). The technique developed in this study is an innovative method for performing a mechanical assessment of engineered tracheal grafts that will enable evaluation of the viscoelastic properties of neo-tracheas prior to transplantation.

Accuracy of different impression materials in parallel and nonparallel implants

PubMed Central

Vojdani, Mahroo; Torabi, Kianoosh; Ansarifard, Elham

2015-01-01

Background: A precise impression is mandatory to obtain passive fit in implant-supported prostheses. The aim of this study was to compare the accuracy of three impression materials in both parallel and nonparallel implant positions. Materials and Methods: In this experimental study, two partial dentate maxillary acrylic models with four implant analogues in canines and lateral incisors areas were used. One model was simulating the parallel condition and the other nonparallel one, in which implants were tilted 30° bucally and 20° in either mesial or distal directions. Thirty stone casts were made from each model using polyether (Impregum), additional silicone (Monopren) and vinyl siloxanether (Identium), with open tray technique. The distortion values in three-dimensions (X, Y and Z-axis) were measured by coordinate measuring machine. Two-way analysis of variance (ANOVA), one-way ANOVA and Tukey tests were used for data analysis (α = 0.05). Results: Under parallel condition, all the materials showed comparable, accurate casts (P = 0.74). In the presence of angulated implants, while Monopren showed more accurate results compared to Impregum (P = 0.01), Identium yielded almost similar results to those produced by Impregum (P = 0.27) and Monopren (P = 0.26). Conclusion: Within the limitations of this study, in parallel conditions, the type of impression material cannot affect the accuracy of the implant impressions; however, in nonparallel conditions, polyvinyl siloxane is shown to be a better choice, followed by vinyl siloxanether and polyether respectively. PMID:26288620

Effects of changes in dietary fatty acids on isolated skeletal muscle functions in rats.

PubMed

Ayre, K J; Hulbert, A J

1996-02-01

The effects of manipulating dietary levels of essential polyunsaturated fatty acids on the function of isolated skeletal muscles in male Wistar rats were examined. Three isoenergetic diets were used: an essential fatty acid-deficient diet (EFAD), a diet high in essential (n-6) fatty acids [High (n-6)], and a diet enriched with essential (n-3) fatty acids [High (n-3)]. After 9 wk, groups of rats on each test diet were fed a stock diet of laboratory chow for a further 6 wk. Muscle function was examined by using a battery of five tests for soleus (slow twitch) and extensor digitorum longus (EDL; fast twitch). Tests included single muscle twitches, sustained tetanic contractions, posttetanic potentiation, sustained high-frequency stimulation, and intermittent low-frequency stimulation. Results for muscles from the High (n-6) and High (n-3) groups were very similar. However, the EFAD diet resulted in significantly lower muscular tensions and reduced response times compared with the High (n-6) and High (n-3) diets. Peak twitch tension in soleus muscles was 16-21% less in the EFAD group than in the High (n-6) and High (n-3) groups, respectively [analysis of variance (ANOVA), P < 0.01). During high-frequency stimulation, EDL muscles from the EFAD rats fatigued 32% more quickly (ANOVA, P < 0.01)]. Also, twitch contraction and half-relaxation times were significantly 5-7% reduced in the EFAD group (ANOVA, P < 0.01). During intermittent low-frequency stimulation, soleus muscles from the EFAD group generated 25-28% less tension than did the other groups (ANOVA, P < 0.01), but in EDL muscles from the EFAD group, endurance was 20% greater than in the High (n-6) group (ANOVA, P < 0.05). After 6 wk on the stock diet, there were no longer any differences between the dietary groups. Manipulation of dietary fatty acids results in significant, but reversible, effects in muscles of rats fed an EFAD diet.

Design of A Cyclone Separator Using Approximation Method

NASA Astrophysics Data System (ADS)

Sin, Bong-Su; Choi, Ji-Won; Lee, Kwon-Hee

2017-12-01

A Separator is a device installed in industrial applications to separate mixed objects. The separator of interest in this research is a cyclone type, which is used to separate a steam-brine mixture in a geothermal plant. The most important performance of the cyclone separator is the collection efficiency. The collection efficiency in this study is predicted by performing the CFD (Computational Fluid Dynamics) analysis. This research defines six shape design variables to maximize the collection efficiency. Thus, the collection efficiency is set up as the objective function in optimization process. Since the CFD analysis requires a lot of calculation time, it is impossible to obtain the optimal solution by linking the gradient-based optimization algorithm. Thus, two approximation methods are introduced to obtain an optimum design. In this process, an L18 orthogonal array is adopted as a DOE method, and kriging interpolation method is adopted to generate the metamodel for the collection efficiency. Based on the 18 analysis results, the relative importance of each variable to the collection efficiency is obtained through the ANOVA (analysis of variance). The final design is suggested considering the results obtained from two optimization methods. The fluid flow analysis of the cyclone separator is conducted by using the commercial CFD software, ANSYS-CFX.

Multi objective Taguchi optimization approach for resistance spot welding of cold rolled TWIP steel sheets

NASA Astrophysics Data System (ADS)

Tutar, Mumin; Aydin, Hakan; Bayram, Ali

2017-08-01

Formability and energy absorption capability of a steel sheet are highly desirable properties in manufacturing components for automotive applications. TWinning Induced Plastisity (TWIP) steels are, new generation high Mn alloyed steels, attractive for the automotive industry due to its outstanding elongation (%40-45) and tensile strength (~1000MPa). So, TWIP steels provide excellent formability and energy absorption capability. Another required property from the steel sheets is suitability for manufacturing methods such as welding. The use of the steel sheets in the automotive applications inevitably involves welding. Considering that there are 3000-5000 welded spots on a vehicle, it can be interpreted that one of the most important manufacturing method is Resistance Spot Welding (RSW) for the automotive industry. In this study; firstly, TWIP steel sheet were cold rolled to 15% reduction in thickness. Then, the cold rolled TWIP steel sheets were welded with RSW method. The welding parameters (welding current, welding time and electrode force) were optimized for maximizing the peak tensile shear load and minimizing the indentation of the joints using a Taguchi L9 orthogonal array. The effect of welding parameters was also evaluated by examining the signal-to-noise ratio and analysis of variance (ANOVA) results.

A sparse grid based method for generative dimensionality reduction of high-dimensional data

NASA Astrophysics Data System (ADS)

Bohn, Bastian; Garcke, Jochen; Griebel, Michael

2016-03-01

Generative dimensionality reduction methods play an important role in machine learning applications because they construct an explicit mapping from a low-dimensional space to the high-dimensional data space. We discuss a general framework to describe generative dimensionality reduction methods, where the main focus lies on a regularized principal manifold learning variant. Since most generative dimensionality reduction algorithms exploit the representer theorem for reproducing kernel Hilbert spaces, their computational costs grow at least quadratically in the number n of data. Instead, we introduce a grid-based discretization approach which automatically scales just linearly in n. To circumvent the curse of dimensionality of full tensor product grids, we use the concept of sparse grids. Furthermore, in real-world applications, some embedding directions are usually more important than others and it is reasonable to refine the underlying discretization space only in these directions. To this end, we employ a dimension-adaptive algorithm which is based on the ANOVA (analysis of variance) decomposition of a function. In particular, the reconstruction error is used to measure the quality of an embedding. As an application, the study of large simulation data from an engineering application in the automotive industry (car crash simulation) is performed.

Dietary acculturation and body composition predict American Hmong children's blood pressure.

PubMed

Smith, Chery; Franzen-Castle, Lisa

2012-01-01

Determine how dietary acculturation, anthropometric measures (height, weight, circumferences, and skinfolds), body mass index (BMI), and waist hip ratios (WHRs) are associated with blood pressure (BP) measures in Hmong children living in Minnesota. Acculturation was measured using responses to questions regarding language usage, social connections, and diet. Dietary assessment was completed using the multiple-pass 24-h dietary recall method on two different days. Anthropometric and BP measurement were taken using standard procedures, and BMI and WHR were calculated. Data analyses included descriptive statistics, ANOVA, and stepwise regression analyses. Using stepwise regression analysis, hip circumference (HC) predicted boys' systolic (S)BP (R(2) = 0.55). For girls' SBP, mid-upper arm circumference, WHR, low calcium consumption, and height percentile jointly explained 41% of the total variation. Mid upper arm circumference (MAC) and carbohydrate consumption predicted 35% of the variance for boys' diastolic (D)BP, and HC, dairy consumption, and calcium intake predicted 31% of the total variance for girls' DBP. Responses to dietary acculturation questions revealed between group differences for breakfast with half of the younger Born-Thailand/Laos (Born-T/L) consuming mostly Hmong food, while at dinner Born-US consumed a mixed diet and Born-T/L were more likely to consume Hmong food. Dietary acculturation and body composition predict Hmong children's BP. Copyright © 2012 Wiley Periodicals, Inc.

Quantitative Comparison of Three Standardization Methods Using a One-Way ANOVA for Multiple Mean Comparisons

ERIC Educational Resources Information Center

Barrows, Russell D.

2007-01-01

A one-way ANOVA experiment is performed to determine whether or not the three standardization methods are statistically different in determining the concentration of the three paraffin analytes. The laboratory exercise asks students to combine the three methods in a single analytical procedure of their own design to determine the concentration of…

Interlinking backscatter, grain size and benthic community structure

NASA Astrophysics Data System (ADS)

McGonigle, Chris; Collier, Jenny S.

2014-06-01

The relationship between acoustic backscatter, sediment grain size and benthic community structure is examined using three different quantitative methods, covering image- and angular response-based approaches. Multibeam time-series backscatter (300 kHz) data acquired in 2008 off the coast of East Anglia (UK) are compared with grain size properties, macrofaunal abundance and biomass from 130 Hamon and 16 Clamshell grab samples. Three predictive methods are used: 1) image-based (mean backscatter intensity); 2) angular response-based (predicted mean grain size), and 3) image-based (1st principal component and classification) from Quester Tangent Corporation Multiview software. Relationships between grain size and backscatter are explored using linear regression. Differences in grain size and benthic community structure between acoustically defined groups are examined using ANOVA and PERMANOVA+. Results for the Hamon grab stations indicate significant correlations between measured mean grain size and mean backscatter intensity, angular response predicted mean grain size, and 1st principal component of QTC analysis (all p < 0.001). Results for the Clamshell grab for two of the methods have stronger positive correlations; mean backscatter intensity (r2 = 0.619; p < 0.001) and angular response predicted mean grain size (r2 = 0.692; p < 0.001). ANOVA reveals significant differences in mean grain size (Hamon) within acoustic groups for all methods: mean backscatter (p < 0.001), angular response predicted grain size (p < 0.001), and QTC class (p = 0.009). Mean grain size (Clamshell) shows a significant difference between groups for mean backscatter (p = 0.001); other methods were not significant. PERMANOVA for the Hamon abundance shows benthic community structure was significantly different between acoustic groups for all methods (p ≤ 0.001). Overall these results show considerable promise in that more than 60% of the variance in the mean grain size of the Clamshell grab samples can be explained by mean backscatter or acoustically-predicted grain size. These results show that there is significant predictive capacity for sediment characteristics from multibeam backscatter and that these acoustic classifications can have ecological validity.

Violation of the Sphericity Assumption and Its Effect on Type-I Error Rates in Repeated Measures ANOVA and Multi-Level Linear Models (MLM).

PubMed

Haverkamp, Nicolas; Beauducel, André

2017-01-01

We investigated the effects of violations of the sphericity assumption on Type I error rates for different methodical approaches of repeated measures analysis using a simulation approach. In contrast to previous simulation studies on this topic, up to nine measurement occasions were considered. Effects of the level of inter-correlations between measurement occasions on Type I error rates were considered for the first time. Two populations with non-violation of the sphericity assumption, one with uncorrelated measurement occasions and one with moderately correlated measurement occasions, were generated. One population with violation of the sphericity assumption combines uncorrelated with highly correlated measurement occasions. A second population with violation of the sphericity assumption combines moderately correlated and highly correlated measurement occasions. From these four populations without any between-group effect or within-subject effect 5,000 random samples were drawn. Finally, the mean Type I error rates for Multilevel linear models (MLM) with an unstructured covariance matrix (MLM-UN), MLM with compound-symmetry (MLM-CS) and for repeated measures analysis of variance (rANOVA) models (without correction, with Greenhouse-Geisser-correction, and Huynh-Feldt-correction) were computed. To examine the effect of both the sample size and the number of measurement occasions, sample sizes of n = 20, 40, 60, 80, and 100 were considered as well as measurement occasions of m = 3, 6, and 9. With respect to rANOVA, the results plead for a use of rANOVA with Huynh-Feldt-correction, especially when the sphericity assumption is violated, the sample size is rather small and the number of measurement occasions is large. For MLM-UN, the results illustrate a massive progressive bias for small sample sizes ( n = 20) and m = 6 or more measurement occasions. This effect could not be found in previous simulation studies with a smaller number of measurement occasions. The proportionality of bias and number of measurement occasions should be considered when MLM-UN is used. The good news is that this proportionality can be compensated by means of large sample sizes. Accordingly, MLM-UN can be recommended even for small sample sizes for about three measurement occasions and for large sample sizes for about nine measurement occasions.

Contribution of attachment insecurity to health-related quality of life in depressed patients.

PubMed

Ponizovsky, Alexander M; Drannikov, Angela

2013-06-22

To examine the individual contributions of insecure attachment styles and depression symptom severity to health-related quality of life (HRQoL) in patients diagnosed with adjustment disorder (AJD) with depressed mood. Participants were 67 patients diagnosed with International Classification of Diseases, Tenth edition AJD with depressed mood, who completed standardised self-report questionnaires measuring study variables. Mean scores and SDs were computed for the outcome and predictor measures. Pearson correlations among the measures were computed. The study hypotheses were tested using analysis of variance (ANOVA) and multiple regression analyses. All analyses were performed using the SPSS-17 software package (SPSS Inc., Chicago, IL, United States). ANOVA showed a significant main effect of the insecure attachment styles on depression symptom severity and life satisfaction scores. The results suggest that depressive symptoms were more severe (F = 4.13, df = 2.67, P < 0.05) and life satisfaction was poorer (F = 5.69, df = 2.67, P < 0.01) in both anxious-ambivalently and avoidantly attached patients compared with their securely attached counterparts, whereas the two insecure groups did not significantly differ by these variables. The anxious/ambivalent attachment style and depression symptom severity significantly contributed to HRQoL, accounting for 21.4% and 29.7% of the total variance, respectively [R(2) = 0.79; Adjusted R(2) = 0.77; F (5, 67) = 33.68, P < 0.0001], even after controlling for gender, marital and employment status confounders. The results show that the anxious/ambivalent attachment style together with depression symptom severity substantially and independently predict the HRQoL outcome in AJD with depressed mood.

A pharmacogenetic study of CD4 recovery in response to HIV antiretroviral therapy in two South African population groups.

PubMed

Parathyras, John; Gebhardt, Stefan; Hillermann-Rebello, Renate; Grobbelaar, Nelis; Venter, Mauritz; Warnich, Louise

2009-05-01

South Africa, like many other Southern African countries, has one of the highest HIV infection rates in the world and many individuals consequently receive antiretroviral therapy (ART). However, knowledge regarding (i) the prevalence of functional single nucleotide polymorphisms (SNPs) in pharmacologically relevant genes, and (ii) variance in pharmacotherapy both within and between different populations and ethnic groups is limited. The aim of this study was to determine whether selected polymorphisms in cytochrome P450 (CYP) genes (CYP2B6 and CYP3A4) and the multidrug-resistance 1 (ABCB1) gene underlie altered antiretroviral (ARV) drug response in two South African populations. DNA samples from 182 HIV-positive individuals of Mixed-Ancestry and Xhosa ethnicity on ART were genotyped for the A-392G SNP in CYP3A4, the G516T and A785G SNPs in CYP2B6, and the T-129C, C1236T, G2677T/A and C3435T SNPs in ABCB1. Univariate two-way analysis of variance (ANOVA) testing revealed no apparent effect of ethnicity on immune recovery (in terms of CD4-cell count) in response to ART. Univariate one-way ANOVA testing revealed a discernible effect of genotype on immune recovery in the cases of the T-129C (P=0.03) and G2677A (P<0.01) polymorphisms in the ABCB1 gene. This study serves as a basis for better understanding and possible prediction of pharmacogenetic risk profiles and drug response in individuals and ethnic groups in South Africa.

T-cell homeostasis in breast cancer survivors with persistent fatigue.

PubMed

Bower, Julienne E; Ganz, Patricia A; Aziz, Najib; Fahey, John L; Cole, Steve W

2003-08-06

Approximately 30% of women successfully treated for breast cancer suffer persistent fatigue of unknown origin. Recent studies linking inflammatory processes to central nervous system-mediated fatigue led us to examine cellular immune system status in 20 fatigued breast cancer survivors and 19 matched non-fatigued breast cancer survivors. Fatigued survivors, compared with non-fatigued survivors, had statistically significantly increased numbers of circulating T lymphocytes (mean 31% increase, 95% confidence interval [CI] = 6% to 56%; P =.015 by two-sided analysis of variance [ANOVA]), with pronounced elevation in the numbers of CD4+ T lymphocytes (mean 41% increase, 95% CI = 15% to 68%; P =.003 by two-sided ANOVA) and CD56+ effector T lymphocytes (mean 52% increase, 95% CI = 4% to 99%; P =.027 by two-sided ANOVA). These changes were independent of patient demographic and treatment characteristics. Absolute numbers of B cells, natural killer cells, granulocytes, and monocytes were not altered. The increased numbers of circulating T cells correlated with elevations in the level of serum interleukin 1 receptor antagonist (for CD3+ cells, r =.56 and P =.001; for CD3+/CD4+ cells, r =.68 and P<.001, by Spearman rank correlation). Results of this study suggest that persistent fatigue in breast cancer survivors might be associated with a chronic inflammatory process involving the T-cell compartment. These results require confirmation in a larger study that is specifically designed to address this hypothesis.

Race, Socioeconomic Status, and Implicit Bias: Implications for Closing the Achievement Gap

NASA Astrophysics Data System (ADS)

Schlosser, Elizabeth Auretta Cox

This study accessed the relationship between race, socioeconomic status, age and the race implicit bias held by middle and high school science teachers in Mobile and Baldwin County Public School Systems. Seventy-nine participants were administered the race Implicit Association Test (race IAT), created by Greenwald, A. G., Nosek, B. A., & Banaji, M. R., (2003) and a demographic survey. Quantitative analysis using analysis of variances, ANOVA and t-tests were used in this study. An ANOVA was performed comparing the race IAT scores of African American science teachers and their Caucasian counterparts. A statically significant difference was found (F = .4.56, p = .01). An ANOVA was also performed using the race IAT scores comparing the age of the participants; the analysis yielded no statistical difference based on age. A t-test was performed comparing the race IAT scores of African American teachers who taught at either Title I or non-Title I schools; no statistical difference was found between groups (t = -17.985, p < .001). A t-test was also performed comparing the race IAT scores of Caucasian teachers who taught at either Title I or non-Title I schools; a statistically significant difference was found between groups ( t = 2.44, p > .001). This research examines the implications of the achievement gap among African American and Caucasian students in science.

Evaluation of the flexural strength and microhardness of provisional crown and bridge materials fabricated by different methods

PubMed Central

Digholkar, Shruti; Madhav, V. N. V.; Palaskar, Jayant

2016-01-01

Purpose: The purpose of this study was to evaluate and compare the flexural strength and microhardness of provisional restorative materials fabricated utilizing rapid prototyping (RP), Computer Assisted Designing and Computer Assisted Milling (CAD-CAM) and conventional method. Materials and Methods: Twenty specimens of dimensions 25 mm × 2 mm × 2 mm (ADA-ANSI specification #27) were fabricated each using: (1) Three dimensional (3D) printed light-cured micro-hybrid filled composite by RP resin group, (2) a milled polymethyl methacrylate (CH) using CAD-CAM (CC resin group), and (3) a conventionally fabricated heat activated polymerized CH resin group. Flexural strength and microhardness were measured and values obtained were evaluated. Results: The measured mean flexural strength values (MegaPascals) were 79.54 (RP resin group), 104.20 (CC resin group), and 95.58 (CH resin group). The measured mean microhardness values (Knoop hardness number) were 32.77 (RP resin group), 25.33 (CC resin group), and 27.36 (CH resin group). The analysis of variance (ANOVA) test shows that there is statistically significant difference in the flexural strength values of the three groups (P < 0.05). According to the pairwise comparison of Tukey's honest significant difference (HSD) test, flexural strength values of CC resin group and CH resin group were higher and statistically significant than those of the RP resin group (P < 0.05). However, there was no significant difference between flexural strength values of CC resin and CH resin group (P = 0.64). The difference in microhardness values of the three groups was statistically significant according to ANOVA as well as the intergroup comparison done using the Tukey's HSD (post hoc) test (P < 0.05). Conclusions: CC-based CH had the highest flexural strength whereas RP-based 3D printed and light cured micro-hybrid filled composite had the highest microhardness. PMID:27746595

Shiftwork and Diurnal Salivary Cortisol Patterns Among Police Officers

PubMed Central

Charles, Luenda E.; Fekedulegn, Desta; Burchfiel, Cecil M.; Hartley, Tara A.; Andrew, Michael E.; Violanti, John M.; Miller, Diane B.

2016-01-01

Objective To investigate associations between shiftwork and diurnal salivary cortisol among 319 police officers (77.7% men) Methods Information on shiftwork was obtained from the City of Buffalo, NY electronic payroll records. Saliva was collected using Salivettes at seven time points and analyzed for free cortisol concentrations (nmol/L) using a chemiluminescence immunoassay. Mean slopes and areas under the curve were compared across shift schedule using analysis of variance (ANOVA)/analysis of covariance (ANCOVA). Results Officers working primarily on the night shift had a significantly shallower slope. Mean slope (nmol/L/minutes) of the cortisol curve varied significantly across shifts (day: −0.00332 ± 0.00017, afternoon: −0.00313 ± 0.00018, night: −0.00257 ± 0.0002); adjusted P = 0.023. Conclusions Our results suggest that night shiftwork is a work-place factor that may alter the response of the hypothalamic–pituitary–adrenal (HPA) axis to the circadian cues responsible for the pattern of the diurnal cortisol curve. PMID:27129020

A comparison of different postures for scaffold end-frame disassembly.

PubMed

Cutlip, R; Hsiao, H; Garcia, R; Becker, E; Mayeux, B

2000-10-01

Overexertion and fall injuries comprise the largest category of nonfatal injuries among scaffold workers. This study was conducted to identify the most favourable scaffold end-frame disassembly techniques and evaluate the associated slip potential by measuring whole-body isometric strength capability and required coefficient of friction (RCOF) to reduce the incidence of injury. Forty-six male construction workers were used to study seven typical postures associated with scaffold end-frame disassembly. An analysis of variance (ANOVA) showed that the isometric forces (334.4-676.3 N) resulting from the seven postures were significantly different (p < 0.05). Three of the disassembly postures resulted in considerable biomechanical stress to workers. The symmetric front-lift method with hand locations at knuckle height would be the most favourable posture; at least 93% of the male construction worker population could handle the end frame with minimum overexertion risk. The static RCOF value resulting from this posture during the disassembly phase was less than 0.2, thus the likelihood of a slip should be low.

Mechanical Properties Analysis of 4340 Steel Specimen Heat Treated in Oven and Quenching in Three Different Fluids

NASA Astrophysics Data System (ADS)

Fakir, Rachid; Barka, Noureddine; Brousseau, Jean

2018-03-01

This paper proposes a statistical approach to analyze the mechanical properties of a standard test specimen, of cylindrical geometry and in steel 4340, with a diameter of 6 mm, heat-treated and quenched in three different fluids. Samples were evaluated in standard tensile test to access their characteristic quantities: hardness, modulus of elasticity, yield strength, tensile strength and ultimate deformation. The proposed approach is gradually being built (a) by a presentation of the experimental device, (b) a presentation of the experimental plan and the results of the mechanical tests, (c) anova analysis of variance and a representation of the output responses using the RSM response surface method, and (d) an analysis of the results and discussion. The feasibility and effectiveness of the proposed approach leads to a precise and reliable model capable of predicting the variation of mechanical properties, depending on the tempering temperature, the tempering time and the cooling capacity of the quenching medium.

Optimization of injection molding process parameters for a plastic cell phone housing component

NASA Astrophysics Data System (ADS)

Rajalingam, Sokkalingam; Vasant, Pandian; Khe, Cheng Seong; Merican, Zulkifli; Oo, Zeya

2016-11-01

To produce thin-walled plastic items, injection molding process is one of the most widely used application tools. However, to set optimal process parameters is difficult as it may cause to produce faulty items on injected mold like shrinkage. This study aims at to determine such an optimum injection molding process parameters which can reduce the fault of shrinkage on a plastic cell phone cover items. Currently used setting of machines process produced shrinkage and mis-specified length and with dimensions below the limit. Thus, for identification of optimum process parameters, maintaining closer targeted length and width setting magnitudes with minimal variations, more experiments are needed. The mold temperature, injection pressure and screw rotation speed are used as process parameters in this research. For optimal molding process parameters the Response Surface Methods (RSM) is applied. The major contributing factors influencing the responses were identified from analysis of variance (ANOVA) technique. Through verification runs it was found that the shrinkage defect can be minimized with the optimal setting found by RSM.

Extraction of natural anthocyanin and colors from pulp of jamun fruit.

PubMed

Maran, J Prakash; Sivakumar, V; Thirugnanasambandham, K; Sridhar, R

2015-06-01

In this present study, natural pigment and colors from pulp of jamun fruit were extracted under different extraction conditions such as extraction temperature (40-60 ˚C), time (20-100 min) and solid-liquid ratio (1:10-1: 15 g/ml) by aqueous extraction method. Three factors with three levels Box-Behnken response surface design was employed to optimize and investigate the effect of process variables on the responses (total anthocyanin and color). The results were analyzed by Pareto analysis of variance (ANOVA) and second order polynomial models were developed to predict the responses. Optimum extraction conditions for maximizing the extraction yield of total anthocyanin (10.58 mg/100 g) and colors (10618.3 mg/l) were found to be: extraction temperature of 44 °C, extraction time of 93 min and solid-liquid ratio of 1:15 g/ml. Under these conditions, experimental values are closely agreed with predicted values.

Biotoxicity of commonly used root canal sealers: A meta-analysis.

PubMed

Kaur, Amandeep; Shah, Naseem; Logani, Ajay; Mishra, Navin

2015-01-01

The main objective of a root canal sealer is to provide a fluid tight seal. The purpose of this systematic meta-analysis was to determine the relative toxicity of commonly used root canal sealers like zinc oxide eugenol, calcium hydroxide, and resin-based sealers. An online search was conducted in peer-reviewed journals listed in PubMed, Cochrane, EBSCO, and IndMed databases between 2000 and 2012). Statistical analysis was carried out by using analysis of variance (ANOVA) followed by post-hoc comparison by Bonferroni method. The comparison between toxicity at 24 h and between 3 and 7 days was done by using paired t-test for each sealer. At 24 h, the relative biotoxicity of the three sealers reported was insignificant (P- value 0.29), but the difference in toxicity was found significant (P < 0.001) after 3 days. Calcium hydroxide sealer and zinc oxide eugenol were found to be significantly biotoxic as compared to resin-based sealers after 3 days.

Optimization of succinic acid fermentation with Actinobacillus succinogenes by response surface methodology (RSM)*

PubMed Central

Zhang, Yun-jian; Li, Qiang; Zhang, Yu-xiu; Wang, Dan; Xing, Jian-min

2012-01-01

Succinic acid is considered as an important platform chemical. Succinic acid fermentation with Actinobacillus succinogenes strain BE-1 was optimized by central composite design (CCD) using a response surface methodology (RSM). The optimized production of succinic acid was predicted and the interactive effects between glucose, yeast extract, and magnesium carbonate were investigated. As a result, a model for predicting the concentration of succinic acid production was developed. The accuracy of the model was confirmed by the analysis of variance (ANOVA), and the validity was further proved by verification experiments showing that percentage errors between actual and predicted values varied from 3.02% to 6.38%. In addition, it was observed that the interactive effect between yeast extract and magnesium carbonate was statistically significant. In conclusion, RSM is an effective and useful method for optimizing the medium components and investigating the interactive effects, and can provide valuable information for succinic acid scale-up fermentation using A. succinogenes strain BE-1. PMID:22302423

Solubility of a new calcium silicate-based root-end filling material

PubMed Central

Singh, Shishir; Podar, Rajesh; Dadu, Shifali; Kulkarni, Gaurav; Purba, Rucheet

2015-01-01

Introduction: The purpose of this study was to compare solubility of a new calcium silicate-based cement, Biodentine with three commonly used root-end filling materials viz. glass-ionomer cement (GIC), intermediate restorative material (IRM), and mineral trioxide aggregate (MTA). Materials and Methods: Twenty stainless steel ring molds were filled with cements corresponding to four groups (n = 5). The weight of 20 dried glass bottles was recorded. Samples were transferred to bottles containing 5 ml of distilled water and stored for 24 h. The bottles were dried at 105΀C and weighed. This procedure was repeated for 3, 10, 30, and 60 days. Data was analyzed with one-way analysis of variance (ANOVA) test (P < 0.05). Results: Biodentine demonstrated significantly higher solubility than MTA for 30- and 60-day immersion periods. Statistical difference was noted between the solubility values of Biodentine samples amongst each of the five time intervals. Conclusions: Biodentine exhibited higher solubility in comparison with all other cements. PMID:25829696

Characteristic of physical, chemical, and microbiological kombucha from various varieties of apples

NASA Astrophysics Data System (ADS)

Zubaidah, E.; Yurista, S.; Rahmadani, N. R.

2018-03-01

Kombucha is a fermented tea beverage with the addition of kombucha starter also called SCOBY (Symbiotic Culture Of Bacteria and Yeast). The purpose of this research was to know the physical, chemical and microbiological characteristics of kombucha from various varieties of apple kombucha. The study used Randomized Block Design (RAK) with one factor of apple varieties (Anna, Fuji, Granny Smith, Manalagi, Red Delicious, Rome Beauty, Royal Gala). Each treatment was repeated three times. Data was analyzed with ANOVA (Analysis of Variance). The best treatment was selected using Multiple Attribute method. Data of hedonic test was analysed using Friedman Test. The best treatment was obtained on Fuji varieties of kombucha apple with the characteristics as follows: total acid 1.33%; pH 2.95; Total phenol 268.57 μg/ml GAE; Total sugar 6.74%; Antibacterial activity against S.aureus 21.30 mm; Antibacterial activity E.coli 21.20 mm; Antioxidant activity 35.62%; Organoleptic aroma 3.55, taste 3.3; Color 3.4 (on a scale of 1-5)

Microclimate monitoring of Ariadne’s house (Pompeii, Italy) for preventive conservation of fresco paintings

PubMed Central

2012-01-01

Background Ariadne’s house, located at the city center of ancient Pompeii, is of great archaeological value due to the fresco paintings decorating several rooms. In order to assess the risks for long-term conservation affecting the valuable mural paintings, 26 temperature data-loggers and 26 relative humidity data-loggers were located in four rooms of the house for the monitoring of ambient conditions. Results Data recorded during 372 days were analyzed by means of graphical descriptive methods and analysis of variance (ANOVA). Results revealed an effect of the roof type and number of walls of the room. Excessive temperatures were observed during the summer in rooms covered with transparent roofs, and corrective actions were taken. Moreover, higher humidity values were recorded by sensors on the floor level. Conclusions The present work provides guidelines about the type, number, calibration and position of thermohygrometric sensors recommended for the microclimate monitoring of mural paintings in outdoor or semi-confined environments. PMID:23190798

Application of linear discriminant analysis and Attenuated Total Reflectance Fourier Transform Infrared microspectroscopy for diagnosis of colon cancer.

PubMed

Khanmohammadi, Mohammadreza; Bagheri Garmarudi, Amir; Samani, Simin; Ghasemi, Keyvan; Ashuri, Ahmad

2011-06-01

Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) microspectroscopy was applied for detection of colon cancer according to the spectral features of colon tissues. Supervised classification models can be trained to identify the tissue type based on the spectroscopic fingerprint. A total of 78 colon tissues were used in spectroscopy studies. Major spectral differences were observed in 1,740-900 cm(-1) spectral region. Several chemometric methods such as analysis of variance (ANOVA), cluster analysis (CA) and linear discriminate analysis (LDA) were applied for classification of IR spectra. Utilizing the chemometric techniques, clear and reproducible differences were observed between the spectra of normal and cancer cases, suggesting that infrared microspectroscopy in conjunction with spectral data processing would be useful for diagnostic classification. Using LDA technique, the spectra were classified into cancer and normal tissue classes with an accuracy of 95.8%. The sensitivity and specificity was 100 and 93.1%, respectively.

Effect of trapidil in myocardial ischemia-reperfusion injury in rabbit.

PubMed

Liu, Mingjie; Sun, Qi; Wang, Qiang; Wang, Xiuying; Lin, Peng; Yang, Ming; Yan, Yuanyuan

2014-01-01

To evaluate the cardioprotective effects of trapidil on myocardial ischemia-reperfusion injury (MIRI) in rabbits. Rabbits were subjected to 40 min of myocardial ischemia followed by 120 min of reperfusion. Blood for superoxide dismutase (SOD) and malondialdehyde (MDA) were estimated. At the end of reperfusion, the rabbits were sacrificed and the hearts were isolated for histological examination. An apoptotic index (AI) was determined using the terminal deoxynucleotidyl transferase (TdT)-mediated dUTP nick-end-labeling (TUNEL) method. The expression of apoptosis-related proteins Bax and Bcl-2 was analyzed using immunohistochemistry. Statistical analyses were performed by one-way analysis of variance (ANOVA), P < 0.05 considered statistically significant. Trapidil caused a significant (P < 0.05) increase in SOD activity, as decreased MDA levels and significantly (P < 0.05) reduced the expression of Bax as compared with the ischemia-reperfusion (IR) control group. Trapidil may attenuate the myocardial damage produced by IR injury and offer potential cardioprotective action.

Statistical Analysis of Human Body Movement and Group Interactions in Response to Music

NASA Astrophysics Data System (ADS)

Desmet, Frank; Leman, Marc; Lesaffre, Micheline; de Bruyn, Leen

Quantification of time series that relate to physiological data is challenging for empirical music research. Up to now, most studies have focused on time-dependent responses of individual subjects in controlled environments. However, little is known about time-dependent responses of between-subject interactions in an ecological context. This paper provides new findings on the statistical analysis of group synchronicity in response to musical stimuli. Different statistical techniques were applied to time-dependent data obtained from an experiment on embodied listening in individual and group settings. Analysis of inter group synchronicity are described. Dynamic Time Warping (DTW) and Cross Correlation Function (CCF) were found to be valid methods to estimate group coherence of the resulting movements. It was found that synchronicity of movements between individuals (human-human interactions) increases significantly in the social context. Moreover, Analysis of Variance (ANOVA) revealed that the type of music is the predominant factor in both the individual and the social context.

Exploring the Theory of Planned Behavior to Explain Sugar-Sweetened Beverage Consumption

PubMed Central

Estabrooks, Paul; Davy, Brenda; Chen, Yvonnes; You, Wendy

2011-01-01

Objective To describe sugar-sweetened beverage (SSB) consumption, establish psychometric properties and utility of a Theory of Planned Behavior (TPB) instrument for SSB consumption. Methods This cross-sectional survey included 119 southwest Virginia participants. Respondents were majority female (66%), white (89%), ≤ high school education (79%), and averaged 41.4 (±13.5) years. A validated beverage questionnaire was used to measure SSB. Eleven TPB constructs were assessed with a 56-item instrument. Analyses included descriptive statistics, one-way ANOVAs, Cronbach alphas, and multiple regressions. Results Sugar-sweetened beverage intake averaged 457 (±430) kilocalories/day. The TPB model provided a moderate explanation of SSB intake (R2=0.38; F=13.10, P<0.01). Behavioral intentions had the strongest relationships with SSB consumption, followed by attitudes, perceived behavioral control, and subjective norms. The six belief constructs did not predict significant variance in the models. Conclusions and Implications Future efforts to comprehensively develop and implement interventions guided by the TPB hold promise for reducing SSB intake. PMID:22154130

Modeling and analysis of film composition on mechanical properties of maize starch based edible films.

PubMed

Prakash Maran, J; Sivakumar, V; Thirugnanasambandham, K; Kandasamy, S

2013-11-01

The present study investigates the influence of composition (content of maize starch (1-3 g), sorbitol (0.5-1.0 ml), agar (0.5-1.0 g) and tween-80 (0.1-0.5 ml)) on the mechanical properties (tensile strength, elongation, Young's modulus, puncture force and puncture deformation) of the maize starch based edible films using four factors with three level Box-Behnken design. The edible films were obtained by casting method. The results showed that, tween-80 increases the permeation of sorbitol in to the polymer matrix. Increasing concentration of sorbitol (hydrophilic nature and plasticizing effect of sorbitol) decreases the tensile strength, Young's modulus and puncture force of the films. The results were analyzed by Pareto analysis of variance (ANOVA) and second order polynomial models were obtained for all responses with high R(2) values (R(2)>0.95). 3D response surface plots were constructed to study the relationship between process variables and the responses. Copyright © 2013 Elsevier B.V. All rights reserved.

A hybrid anchored-ANOVA - POD/Kriging method for uncertainty quantification in unsteady high-fidelity CFD simulations

NASA Astrophysics Data System (ADS)

Margheri, Luca; Sagaut, Pierre

2016-11-01

To significantly increase the contribution of numerical computational fluid dynamics (CFD) simulation for risk assessment and decision making, it is important to quantitatively measure the impact of uncertainties to assess the reliability and robustness of the results. As unsteady high-fidelity CFD simulations are becoming the standard for industrial applications, reducing the number of required samples to perform sensitivity (SA) and uncertainty quantification (UQ) analysis is an actual engineering challenge. The novel approach presented in this paper is based on an efficient hybridization between the anchored-ANOVA and the POD/Kriging methods, which have already been used in CFD-UQ realistic applications, and the definition of best practices to achieve global accuracy. The anchored-ANOVA method is used to efficiently reduce the UQ dimension space, while the POD/Kriging is used to smooth and interpolate each anchored-ANOVA term. The main advantages of the proposed method are illustrated through four applications with increasing complexity, most of them based on Large-Eddy Simulation as a high-fidelity CFD tool: the turbulent channel flow, the flow around an isolated bluff-body, a pedestrian wind comfort study in a full scale urban area and an application to toxic gas dispersion in a full scale city area. The proposed c-APK method (anchored-ANOVA-POD/Kriging) inherits the advantages of each key element: interpolation through POD/Kriging precludes the use of quadrature schemes therefore allowing for a more flexible sampling strategy while the ANOVA decomposition allows for a better domain exploration. A comparison of the three methods is given for each application. In addition, the importance of adding flexibility to the control parameters and the choice of the quantity of interest (QoI) are discussed. As a result, global accuracy can be achieved with a reasonable number of samples allowing computationally expensive CFD-UQ analysis.

Asphyxia in the Newborn: Evaluating the Accuracy of ICD Coding, Clinical Diagnosis and Reimbursement: Observational Study at a Swiss Tertiary Care Center on Routinely Collected Health Data from 2012-2015

PubMed Central

Rimle, Carole; Zwahlen, Marcel; Triep, Karen; Raio, Luigi; Nelle, Mathias

2017-01-01

Background The ICD-10 categories of the diagnosis “perinatal asphyxia” are defined by clinical signs and a 1-minute Apgar score value. However, the modern conception is more complex and considers metabolic values related to the clinical state. A lack of consistency between the former clinical and the latter encoded diagnosis poses questions over the validity of the data. Our aim was to establish a refined classification which is able to distinctly separate cases according to clinical criteria and financial resource consumption. The hypothesis of the study is that outdated ICD-10 definitions result in differences between the encoded diagnosis asphyxia and the medical diagnosis referring to the clinical context. Methods Routinely collected health data (encoding and financial data) of the University Hospital of Bern were used. The study population was chosen by selected ICD codes, the encoded and the clinical diagnosis were analyzed and each case was reevaluated. The new method categorizes the diagnoses of perinatal asphyxia into the following groups: mild, moderate and severe asphyxia, metabolic acidosis and normal clinical findings. The differences of total costs per case were determined by using one-way analysis of variance. Results The study population included 622 cases (P20 “intrauterine hypoxia” 399, P21 “birth asphyxia” 233). By applying the new method, the diagnosis asphyxia could be ruled out with a high probability in 47% of cases and the variance of case related costs (one-way ANOVA: F (5, 616) = 55.84, p < 0.001, multiple R-squared = 0.312, p < 0.001) could be best explained. The classification of the severity of asphyxia could clearly be linked to the complexity of cases. Conclusion The refined coding method provides clearly defined diagnoses groups and has the strongest effect on the distribution of costs. It improves the diagnosis accuracy of perinatal asphyxia concerning clinical practice, research and reimbursement. PMID:28118380

Efficacy of Conventional Laser Irradiation Versus a New Method for Gingival Depigmentation (Sieve Method): A Clinical Trial.

PubMed

Houshmand, Behzad; Janbakhsh, Noushin; Khalilian, Fatemeh; Talebi Ardakani, Mohammad Reza

2017-01-01

Introduction: Diode laser irradiation has recently shown promising results for treatment of gingival pigmentation. This study sought to compare the efficacy of 2 diode laser irradiation protocols for treatment of gingival pigmentations, namely the conventional method and the sieve method. Methods: In this split-mouth clinical trial, 15 patients with gingival pigmentation were selected and their pigmentation intensity was determined using Dummett's oral pigmentation index (DOPI) in different dental regions. Diode laser (980 nm wavelength and 2 W power) was irradiated through a stipple pattern (sieve method) and conventionally in the other side of the mouth. Level of pain and satisfaction with the outcome (both patient and periodontist) were measured using a 0-10 visual analog scale (VAS) for both methods. Patients were followed up at 2 weeks, one month and 3 months. Pigmentation levels were compared using repeated measures of analysis of variance (ANOVA). The difference in level of pain and satisfaction between the 2 groups was analyzed by sample t test and general estimate equation model. Results: No significant differences were found regarding the reduction of pigmentation scores and pain and scores between the 2 groups. The difference in satisfaction with the results at the three time points was significant in both conventional and sieve methods in patients ( P = 0.001) and periodontists ( P = 0.015). Conclusion: Diode laser irradiation in both methods successfully eliminated gingival pigmentations. The sieve method was comparable to conventional technique, offering no additional advantage.

Optimization of multiple quality characteristics in bone drilling using grey relational analysis

PubMed Central

Pandey, Rupesh Kumar; Panda, Sudhansu Sekhar

2014-01-01

Purpose Drilling of bone is common during bone fracture treatment to fix the fractured parts with screws wires or plates. Minimally invasive drilling of the bone has a great demand as it helps in better fixation and quick healing of the broken bones. The purpose of the present investigation is to determine the optimum cutting condition for the minimization of the temperature, force and surface roughness simultaneously during bone drilling. Method In this study, drilling experiments have been performed on bovine bone with different conditions of feed rate and drill rotational speed using full factorial design. Optimal level of the drilling parameters is determined by the grey relational grade (GRG) obtained from the GRA as the performance index of multiple quality characteristics. The effect of each drilling parameter on GRG is determined using analysis of variance (ANOVA) and the results obtained are validated by confirmation experiment. Results Grey relational analysis showed that the investigation with feed rate of 40 mm/min and spindle speed of 500 rpm has the highest grey relational grade and is recommended setting for minimum temperature, force and surface roughness simultaneously during bone drilling. Feed rate has the highest contribution (59.49%) on the multiple performance characteristics followed by the spindle speed (37.69%) as obtained from ANOVA analysis. Conclusions The use of grey relational analysis will simplify the complex process of optimization of the multi response characteristics in bone drilling by converting them into a single grey relational grade. The use of the above suggested methodology can greatly minimize the bone tissue injury during drilling. PMID:25829751

The effect of yoga in stress reduction for dental students performing their first periodontal surgery: A randomized controlled study

PubMed Central

Shankarapillai, Rajesh; Nair, Manju Anathakrishnan; George, Roy

2012-01-01

Context: The dental students experience a lot of stress, which increase when they perform their first surgical procedure. Yoga as an anxiolytic tool in anxiety reduction has been practiced over centuries in India. Aim: To assess the efficacy of yoga in reducing the state trait anxiety of dental students before their first periodontal surgery performance. Settings and Design: A randomized controlled study using a two-way split plot design (pre-post-test) was conducted in the department of periodontics, Pacific Dental College, Udaipur, India. Materials and Methods: One hundred clinical dental students who were ready to perform their first periodontal surgery were selected. Students were randomly assigned to two groups and were given a 60-min session on stress reduction. Group A, yogic intervention group, were instructed to do yoga and their performances were monitored for a period of one week and Group B, control group, were given a lecture on stress reduction without any yoga instructions. The investigator who was unaware of the groups had taken the state trait anxiety score of the students three times a) before assigning them to each group, b) prior to the surgical procedure and c) immediately after the performance of surgery. Statistical Analysis Used: Analyses of variance (ANOVA) by SPSS V.16. Results: The statistical results showed a significant reduction in the VAS and state trait anxiety of Group A compared to Group B (ANOVA; P<0.001). Conclusions: This study concludes that Yogic breathing has a significant effect on the reduction of state trait anxiety level of dental students. PMID:22346066

A Comparative Study of Shaping Ability of four Rotary Systems

PubMed Central

Zarzosa, José Ignacio; Pallarés, Antonio

2015-01-01

Purpose This study compared the cutting area, instrumentation time, root canal anatomy preservation and non-instrumented areas obtained by F360®, Mtwo®, RaCe® and Hyflex® files with ISO size 35. Material and Methods 120 teeth with a single straight root and root canal were divided into 4 groups. Working length was calculated by using X-rays. The teeth were sectioned with a handpiece and a diamond disc, and the sections were observed with Nikon SMZ-2T stereoscopic microscope and an Intralux 4000-1 light source. The groups were adjusted with a preoperative analysis with AutoCAD. The teeth were reconstructed by a #10 K-File and epoxy glue. Each group was instrumented with one of the four file systems. The instrumentation time was calculated with a 1/100 second chronometer. The area of the thirds and root canal anatomy preservation were analyzed with AutoCAD 2013 and the non-instrumented areas with AutoCAD 2013 and SMZ-2T stereoscopic microscope. The statistical analysis was made with Levene’s Test, ANOVA, Bonferroni Test and Pearson´s Chi-square. Results Equal variances were shown by Levene’s Test (P > 0.05). ANOVA (P > 0.05) showed the absence of significant differences. There were significant differences in the instrumentation time (P < 0.05). For root canal anatomy preservation and non-instrumented areas, there were no significant differences between all systems (P > 0.05). Conclusions The 4 different rotary systems produced similar cutting area, root canal anatomy preservation and non-instrumented areas. Regarding instrumentation time, F360® was the fastest system statistically. PMID:27688412

Binary similarity measures for fingerprint analysis of qualitative metabolomic profiles.

PubMed

Rácz, Anita; Andrić, Filip; Bajusz, Dávid; Héberger, Károly

2018-01-01

Contemporary metabolomic fingerprinting is based on multiple spectrometric and chromatographic signals, used either alone or combined with structural and chemical information of metabolic markers at the qualitative and semiquantitative level. However, signal shifting, convolution, and matrix effects may compromise metabolomic patterns. Recent increase in the use of qualitative metabolomic data, described by the presence (1) or absence (0) of particular metabolites, demonstrates great potential in the field of metabolomic profiling and fingerprint analysis. The aim of this study is a comprehensive evaluation of binary similarity measures for the elucidation of patterns among samples of different botanical origin and various metabolomic profiles. Nine qualitative metabolomic data sets covering a wide range of natural products and metabolomic profiles were applied to assess 44 binary similarity measures for the fingerprinting of plant extracts and natural products. The measures were analyzed by the novel sum of ranking differences method (SRD), searching for the most promising candidates. Baroni-Urbani-Buser (BUB) and Hawkins-Dotson (HD) similarity coefficients were selected as the best measures by SRD and analysis of variance (ANOVA), while Dice (Di1), Yule, Russel-Rao, and Consonni-Todeschini 3 ranked the worst. ANOVA revealed that concordantly and intermediately symmetric similarity coefficients are better candidates for metabolomic fingerprinting than the asymmetric and correlation based ones. The fingerprint analysis based on the BUB and HD coefficients and qualitative metabolomic data performed equally well as the quantitative metabolomic profile analysis. Fingerprint analysis based on the qualitative metabolomic profiles and binary similarity measures proved to be a reliable way in finding the same/similar patterns in metabolomic data as that extracted from quantitative data.

A Comparative Study of Involvement and Motivation among Casino Gamblers

PubMed Central

Lee, Choong-Ki; Lee, BongKoo; Bernhard, Bo Jason

2009-01-01

Objective The purpose of this paper is to investigate three different types of gamblers (which we label "non-problem", "some problem", and "probable pathological gamblers") to determine differences in involvement and motivation, as well as differences in demographic and behavioral variables. Methods The analysis takes advantage of a unique opportunity to sample on-site at a major casino in South Korea, and the resulting purposive sample yielded 180 completed questionnaires in each of the three groups, for a total number of 540. Factor analysis, analysis of variance (ANOVA) and Duncan tests, and Chi-square tests are employed to analyze the data collected from the survey. Results Findings from ANOVA tests indicate that involvement factors of importance/self-expression, pleasure/interest, and centrality derived from the factor analysis were significantly different among these three types of gamblers. The "probable pathological" and "some problem" gamblers were found to have similar degrees of involvement, and higher degrees of involvement than the non-problem gamblers. The tests also reveal that motivational factors of escape, socialization, winning, and exploring scenery were significantly different among these three types of gamblers. When looking at motivations to visit the casino, "probable pathological" gamblers were more likely to seek winning, the "some problem" group appeared to be more likely to seek escape, and the "non-problem" gamblers indicate that their motivations to visit centered around explorations of scenery and culture in the surrounding casino area. Conclusion The tools for exploring motivations and involvements of gambling provide valuable and discerning information about the entire spectrum of gamblers. PMID:20046388

Brain activity associated with selective attention, divided attention and distraction.

PubMed

Salo, Emma; Salmela, Viljami; Salmi, Juha; Numminen, Jussi; Alho, Kimmo

2017-06-01

Top-down controlled selective or divided attention to sounds and visual objects, as well as bottom-up triggered attention to auditory and visual distractors, has been widely investigated. However, no study has systematically compared brain activations related to all these types of attention. To this end, we used functional magnetic resonance imaging (fMRI) to measure brain activity in participants performing a tone pitch or a foveal grating orientation discrimination task, or both, distracted by novel sounds not sharing frequencies with the tones or by extrafoveal visual textures. To force focusing of attention to tones or gratings, or both, task difficulty was kept constantly high with an adaptive staircase method. A whole brain analysis of variance (ANOVA) revealed fronto-parietal attention networks for both selective auditory and visual attention. A subsequent conjunction analysis indicated partial overlaps of these networks. However, like some previous studies, the present results also suggest segregation of prefrontal areas involved in the control of auditory and visual attention. The ANOVA also suggested, and another conjunction analysis confirmed, an additional activity enhancement in the left middle frontal gyrus related to divided attention supporting the role of this area in top-down integration of dual task performance. Distractors expectedly disrupted task performance. However, contrary to our expectations, activations specifically related to the distractors were found only in the auditory and visual cortices. This suggests gating of the distractors from further processing perhaps due to strictly focused attention in the current demanding discrimination tasks. Copyright © 2017 Elsevier B.V. All rights reserved.

Comparison of the effect of labiolingual inclination and anteroposterior position of maxillary incisors on esthetic profile in three different facial patterns

PubMed Central

Chirivella, Praveen; Singaraju, Gowri Sankar; Mandava, Prasad; Reddy, V Karunakar; Neravati, Jeevan Kumar; George, Suja Ani

2017-01-01

Objective: To test the null hypothesis that there is no effect of esthetic perception of smiling profile in three different facial types by a change in the maxillary incisor inclination and position. Materials and Methods: A smiling profile photograph with Class I skeletal and dental pattern, normal profile were taken in each of the three facial types dolichofacial, mesofacial, and brachyfacial. Based on the original digital image, 15 smiling profiles in each of the facial types were created using the FACAD software by altering the labiolingual inclination and anteroposterior position of the maxillary incisors. These photographs were rated on a visual analog scale by three panels of examiners consisting of orthodontists, dentists, and nonprofessionals with twenty members in each group. The responses were assessed by analysis of variance (ANOVA) test followed by post hoc Scheffe. Results: Significant differences (P < 0.001) were detected when ratings of each photograph in each of the individual facial type was compared. In dolichofacial and mesofacial pattern, the position of the maxillary incisor must be limited to 2 mm from the goal anterior limit line. In brachyfacial pattern, any movement of facial axis point of maxillary incisors away from GALL is worsens the facial esthetics. The result of the ANOVA showed differences among the three groups for certain facial profiles. Conclusion: The hypothesis was rejected. The esthetic perception of labiolingual inclination and anteroposterior of maxillary incisors differ in different facial types, and this may effect in formulating treatment plans for different facial types. PMID:28197396

Population differences in the postcrania of modern South Africans and the implications for ancestry estimation.

PubMed

Liebenberg, Leandi; L'Abbé, Ericka N; Stull, Kyra E

2015-12-01

The cranium is widely recognized as the most important skeletal element to use when evaluating population differences and estimating ancestry. However, the cranium is not always intact or available for analysis, which emphasizes the need for postcranial alternatives. The purpose of this study was to quantify postcraniometric differences among South Africans that can be used to estimate ancestry. Thirty-nine standard measurements from 11 postcranial bones were collected from 360 modern black, white and coloured South Africans; the sex and ancestry distribution were equal. Group differences were explored with analysis of variance (ANOVA) and Tukey's honestly significant difference (HSD) test. Linear and flexible discriminant analysis (LDA and FDA, respectively) were conducted with bone models as well as numerous multivariate subsets to identify the model and method that yielded the highest correct classifications. Leave-one-out (LDA) and k-fold (k=10; FDA) cross-validation with equal priors were used for all models. ANOVA and Tukey's HSD results reveal statistically significant differences between at least two of the three groups for the majority of the variables, with varying degrees of group overlap. Bone models, which consisted of all measurements per bone, resulted in low accuracies that ranged from 46% to 63% (LDA) and 41% to 66% (FDA). In contrast, the multivariate subsets, which consisted of different variable combinations from all elements, achieved accuracies as high as 85% (LDA) and 87% (FDA). Thus, when using a multivariate approach, the postcranial skeleton can distinguish among three modern South African groups with high accuracy. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

U-shaped association between central body fat and the urinary albumin-to-creatinine ratio and microalbuminuria

PubMed Central

2013-01-01

Background The prevalence of obese and overweight patients has increased dramatically worldwide. Both are common risk factors for chronic kidney disease (CKD) as indicated by a diminished estimated glomerular filtration rate (eGFR) or microalbuminuria. This study aimed to investigate whether anthropometric parameters [waist circumference (WC), waist-to-height ratio (WHtR) and body mass index (BMI)] are associated with renal function in a population-based study of Caucasian subjects. Methods Data from 3749 subjects (1825 women) aged 20 to 81 years from the Study of Health in Pomerania (SHIP) were analysed. Renal indices, including the urinary albumin-to-creatinine ratio (uACR), microalbuminuria, eGFR and CKD, were studied. Parameters of anthropometry (WC, WHtR and BMI) were categorised into sex-specific quintiles. Results Analysis of variance (ANOVA) models, adjusting for age, sex, type 2 diabetes mellitus and hypertension, revealed that a high and low WC or WHtR and low BMI were independently related to a higher uACR. Logistic regression models confirmed these results with respect to uACR and showed that subjects with a high or low WC or a high WHtR had increased odds of microalbuminuria. The ANOVA models revealed no relations of the investigated anthropometric parameters with eGFR. However, subjects with high values for these parameters had increased odds of CKD. Conclusions Our results demonstrate U-shaped associations between markers of central fat distribution and uACR or microalbuminuria in the general population, suggesting that both obese and very thin subjects have a higher risk of renal impairment. PMID:23594567

Effect of a lateral glide mobilisation with movement of the hip on vibration threshold in healthy volunteers.

PubMed

Smith, Darren A; Saranga, Jacob; Pritchard, Andrew; Kommatas, Nikolaos A; Punnoose, Shinu Kovelal; Kale, Supriya Tukaram

2018-01-01

Mulligan's mobilisation-with-movement (MWM) techniques are proposed to achieve their clinical benefit via neurophysiological mechanisms. However, previous research has focussed on responses in the sympathetic nervous system only, and is not conclusive. An alternative measure of neurophysiological response to MWM is required to support or refute this mechanism of action. Recently, vibration threshold (VT) has been used to quantify changes in the sensory nervous system in patients experiencing musculoskeletal pain. To investigate the effect of a lateral glide MWM of the hip joint on vibration threshold compared to a placebo and control condition in asymptomatic volunteers. Fifteen asymptomatic volunteers participated in this single-blinded, randomised, within-subject, placebo, control design. Participants received each of three interventions in a randomised order; a lateral glide MWM of the hip joint into flexion, a placebo MWM, and a control intervention. Vibration threshold (VT) measures were taken at baseline and immediately after each intervention. Mean change in VT from baseline was calculated for each intervention and then analysed for between group differences using a one-way analysis of variance (ANOVA). A one-way ANOVA revealed no statistically significant differences between the three experimental conditions (P = 0.812). This small study found that a lateral glide MWM of the hip did not significantly change vibration threshold compared to a placebo and control intervention in an asymptomatic population. This study provides a method of using vibration threshold to investigate the potential neurophysiological effects of a manual therapy intervention that should be repeated in a larger, symptomatic population. Copyright © 2016 Elsevier Ltd. All rights reserved.

Seasonal effects of the zebra mussel (Dreissena polymorpha) on sediment denitrification rates in Pool 8 of the Upper Mississippi River

USGS Publications Warehouse

Bruesewitz, Denise A.; Tank, Jennifer L.; Bernot, Melody J.; Richardson, William B.; Strauss, Eric A.

2006-01-01

Zebra mussels (Dreissena polymorpha) have altered the structure of invaded ecosystems and exhibit characteristics that suggest they may influence ecosystem processes such as nitrogen (N) cycling. We measured denitrification rates seasonally on sediments underlying zebra mussel beds collected from the impounded zone of Navigation Pool 8 of the Upper Mississippi River. Denitrification assays were amended with nutrients to characterize variation in nutrient limitation of denitrification in the presence or absence of zebra mussels. Denitrification rates at zebra mussel sites were high relative to sites without zebra mussels in February 2004 (repeated measures analysis of variance (RM ANOVA), p = 0.005), potentially because of high NO3-N variability from nitrification of high NH4+ zebra mussel waste. Denitrification rates were highest in June 2003 (RM ANOVA, p 3-N concentrations during the study (linear regression, R2 = 0.72, p p ≤ 0.01). Examining how zebra mussels influence denitrification rates will aid in developing a more complete understanding of the impact of zebra mussels and more effective management strategies of eutrophic waters.

Monte Carlo simulation of edge placement error

NASA Astrophysics Data System (ADS)

Kobayashi, Shinji; Okada, Soichiro; Shimura, Satoru; Nafus, Kathleen; Fonseca, Carlos; Estrella, Joel; Enomoto, Masashi

2018-03-01

In the discussion of edge placement error (EPE), we proposed interactive pattern fidelity error (IPFE) as an indicator to judge pass/fail of integrated patterns. IPFE consists of lower and upper layer EPEs (CD and center of gravity: COG) and overlay, which is decided from the combination of each maximum variation. We succeeded in obtaining the IPFE density function by Monte Carlo simulation. In the results, we also found that the standard deviation (σ) of each indicator should be controlled by 4.0σ, at the semiconductor grade, such as 100 billion patterns per die. Moreover, CD, COG and overlay were analyzed by analysis of variance (ANOVA); we can discuss all variations from wafer to wafer (WTW), pattern to pattern (PTP), line edge roughness (LWR) and stochastic pattern noise (SPN) on an equal footing. From the analysis results, we can determine that these variations belong to which process and tools. Furthermore, measurement length of LWR is also discussed in ANOVA. We propose that the measurement length for IPFE analysis should not be decided to the micro meter order, such as >2 μm length, but for which device is actually desired.

Adsorptive removal of aniline by granular activated carbon from aqueous solutions with catechol and resorcinol.

PubMed

Suresh, S; Srivastava, V C; Mishrab, I M

2012-01-01

In the present paper, the removal of aniline by adsorption process onto granular activated carbon (GAC) is reported from aqueous solutions containing catechol and resorcinol separately. The Taguchi experimental design was applied to study the effect of such parameters as the initial component concentrations (C(0,i)) of two solutes (aniline and catechol or aniline and resorcinol) in the solution, temperature (T), adsorbent dosage (m) and contact time (t). The L27 orthogonal array consisting of five parameters each with three levels was used to determine the total amount of solutes adsorbed on GAC (q(tot), mmol/g) and the signal-to-noise ratio. The analysis of variance (ANOVA) was used to determine the optimum conditions. Under these conditions, the ANOVA shows that m is the most important parameter in the adsorption process. The most favourable levels of process parameters were T = 303 K, m = 10 g/l and t = 660 min for both the systems, qtot values in the confirmation experiments carried out at optimum conditions were 0.73 and 0.95 mmol/g for aniline-catechol and aniline-resorcinol systems, respectively.

Racial/ethnic variation in mental health correlates of substance use among college students.

PubMed

Sumstine, Stephanie; Cruz, Sheena; Schroeder, Cassandra; Takeda, Summer; Bavarian, Niloofar

2018-01-01

This study investigated mental health indicators, substance use, and their relationships, by race/ethnicity. A probability sample of 1,053 students at two California universities self-reported their frequency of substance use and rated their experience with indicators of mental health. One-way analysis of variance (ANOVA), chi-square tests, and multivariate censored regression models were estimated to examine which indicators of mental health were associated with each substance use form by race/ethnicity. Results from the one-way ANOVA and chi-square tests showed differences in substance use prevalence and mental health by race/ethnicity. For example, students who identified as White demonstrate a higher prevalence for every form of substance use in comparison to the Asian, Latino, and "All other" categories. Results from the regression showed, among Whites, inattention was associated with prescription stimulant misuse, and psychological distress was associated with marijuana use. Among Latinos, inattention was associated with cocaine and prescription stimulant use. Among Asians, psychological distress was associated with tobacco use and the misuse of prescription painkillers. Findings highlight the need to ensure subpopulations receive needed services.

Enhancement of docosahexaenoic acid production by Schizochytrium SW1 using response surface methodology

NASA Astrophysics Data System (ADS)

Nazir, Mohd Yusuf Mohd; Al-Shorgani, Najeeb Kaid Nasser; Kalil, Mohd Sahaid; Hamid, Aidil Abdul

2015-09-01

In this study, three factors (fructose concentration, agitation speed and monosodium glutamate (MSG) concentration) were optimized to enhance DHA production by Schizochytrium SW1 using response surface methodology (RSM). Central composite design was applied as the experimental design and analysis of variance (ANOVA) was used to analyze the data. The experiments were conducted using 500 mL flask with 100 mL working volume at 30°C for 96 hours. ANOVA analysis revealed that the process was adequately represented significantly by the quadratic model (p<0.0001) and two of the factors namely agitation speed and MSG concentration significantly affect DHA production (p<0.005). Level of influence for each variable and quadratic polynomial equation were obtained for DHA production by multiple regression analyses. The estimated optimum conditions for maximizing DHA production by SW1 were 70 g/L fructose, 250 rpm agitation speed and 12 g/L MSG. Consequently, the quadratic model was validated by applying of the estimated optimum conditions, which confirmed the model validity and 52.86% of DHA was produced.

Goals and potential career advancement of licensed practical nurses in Japan.

PubMed

Ikeda, Mari; Inoue, Katsuya; Kamibeppu, Kiyoko

2008-10-01

To investigate the effects of personal and professional variables on career advancement intentions of working Licensed Practical Nurses (LPNs). In Japan, two levels of professional nursing licensures, the LPN and the registered nurse (RN), are likely to be integrated in the future. Therefore, it is important to know the career advancement intentions of LPNs. Questionnaires were sent to a sample of 356 LPNs. Analysis of variance (anova) and discriminative analysis were used. We found that those who had a positive image of LPNs along with a positive image of RNs were identified as showing interest in career advancement. The results of anova showed that age had a negative effect; however, discriminative analysis suggested that age is not as significant compared with other variables. Our results indicate that the 'image of RNs', and 'role-acceptance factors' have an effect on career advancement intentions of LPNs. Our results suggest that Nursing Managers should create a supportive working environment where the LPN would feel encouraged to carry out the nursing role, thereby creating a positive image of nursing in general which would lead to career motivation and pursuing RN status.

Low validity of the Sensewear Pro3 activity monitor compared to indirect calorimetry during simulated free living in patients with osteoarthritis of the hip

PubMed Central

2014-01-01

Background To validate physical activity estimates by the Sensewear Pro3 activity monitor compared with indirect calorimetry during simulated free living in patients diagnosed with osteoarthritis of the hip pre or post total hip arthroplasty. Methods Twenty patients diagnosed with hip osteoarthritis (10 pre- and 10 post total hip arthroplasty; 40% female; age: 63.3 ± 9.0; BMI: 23.7 ± 3.7). All patients completed a 2 hour protocol of simulated free living with 8 different typical physical activity types. Energy consumption (kcal/min) was estimated by the Sense Wear pro3 Armband activity monitor and validated against indirect calorimetry (criterion method) by means of a portable unit (Cosmed K4b2). Bias and variance was analyzed using functional ANOVA. Results Mean bias during all activities was 1.5 Kcal/min 95%CI [1.3; 1.8] corresponding to 72% (overestimation). Normal gait speed showed an overestimation of 2.8 Kcal/min, 95%CI [2.3; 3.3] (93%) while an underestimation of -1.1 Kcal/min, 95%CI [-1.8; -0.3] (-25%) was recorded during stair climb. Activities dominated by upper body movements showed large overestimation with 4.37 Kcal/min, 95%CI [3.8; 5.1] (170%) being recorded during gardening. Both bias and variance appeared to be dependent on activity type. Conclusion The activity monitor generally overestimated the energy consumption during common activities of low to medium intensity in the patient group. The size and direction of the bias was highly dependent on the activity type which indicates the activity monitor is of limited value in patients with hip osteoarthritis and that the results do not express the real energy expenditure. PMID:24552503

Sampling and Data Analysis for Environmental Microbiology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murray, Christopher J.

2001-06-01

A brief review of the literature indicates the importance of statistical analysis in applied and environmental microbiology. Sampling designs are particularly important for successful studies, and it is highly recommended that researchers review their sampling design before heading to the laboratory or the field. Most statisticians have numerous stories of scientists who approached them after their study was complete only to have to tell them that the data they gathered could not be used to test the hypothesis they wanted to address. Once the data are gathered, a large and complex body of statistical techniques are available for analysis ofmore » the data. Those methods include both numerical and graphical techniques for exploratory characterization of the data. Hypothesis testing and analysis of variance (ANOVA) are techniques that can be used to compare the mean and variance of two or more groups of samples. Regression can be used to examine the relationships between sets of variables and is often used to examine the dependence of microbiological populations on microbiological parameters. Multivariate statistics provides several methods that can be used for interpretation of datasets with a large number of variables and to partition samples into similar groups, a task that is very common in taxonomy, but also has applications in other fields of microbiology. Geostatistics and other techniques have been used to examine the spatial distribution of microorganisms. The objectives of this chapter are to provide a brief survey of some of the statistical techniques that can be used for sample design and data analysis of microbiological data in environmental studies, and to provide some examples of their use from the literature.« less

A comparison of five standard methods for evaluating image intensity uniformity in partially parallel imaging MRI

PubMed Central

Goerner, Frank L.; Duong, Timothy; Stafford, R. Jason; Clarke, Geoffrey D.

2013-01-01

Purpose: To investigate the utility of five different standard measurement methods for determining image uniformity for partially parallel imaging (PPI) acquisitions in terms of consistency across a variety of pulse sequences and reconstruction strategies. Methods: Images were produced with a phantom using a 12-channel head matrix coil in a 3T MRI system (TIM TRIO, Siemens Medical Solutions, Erlangen, Germany). Images produced using echo-planar, fast spin echo, gradient echo, and balanced steady state free precession pulse sequences were evaluated. Two different PPI reconstruction methods were investigated, generalized autocalibrating partially parallel acquisition algorithm (GRAPPA) and modified sensitivity-encoding (mSENSE) with acceleration factors (R) of 2, 3, and 4. Additionally images were acquired with conventional, two-dimensional Fourier imaging methods (R = 1). Five measurement methods of uniformity, recommended by the American College of Radiology (ACR) and the National Electrical Manufacturers Association (NEMA) were considered. The methods investigated were (1) an ACR method and a (2) NEMA method for calculating the peak deviation nonuniformity, (3) a modification of a NEMA method used to produce a gray scale uniformity map, (4) determining the normalized absolute average deviation uniformity, and (5) a NEMA method that focused on 17 areas of the image to measure uniformity. Changes in uniformity as a function of reconstruction method at the same R-value were also investigated. Two-way analysis of variance (ANOVA) was used to determine whether R-value or reconstruction method had a greater influence on signal intensity uniformity measurements for partially parallel MRI. Results: Two of the methods studied had consistently negative slopes when signal intensity uniformity was plotted against R-value. The results obtained comparing mSENSE against GRAPPA found no consistent difference between GRAPPA and mSENSE with regard to signal intensity uniformity. The results of the two-way ANOVA analysis suggest that R-value and pulse sequence type produce the largest influences on uniformity and PPI reconstruction method had relatively little effect. Conclusions: Two of the methods of measuring signal intensity uniformity, described by the (NEMA) MRI standards, consistently indicated a decrease in uniformity with an increase in R-value. Other methods investigated did not demonstrate consistent results for evaluating signal uniformity in MR images obtained by partially parallel methods. However, because the spatial distribution of noise affects uniformity, it is recommended that additional uniformity quality metrics be investigated for partially parallel MR images. PMID:23927345

Coping and experiential avoidance: unique or overlapping constructs?

PubMed

Karekla, Maria; Panayiotou, Georgia

2011-06-01

The present study examined associations between coping as measured by the Brief COPE and experiential avoidance as measured by the AAQ-II and the role of both constructs in predicting psychological distress and well-being. Specifically, associations between experiential avoidance and other types of coping were examined, and factor analysis addressed the question of whether experiential avoidance is part of coping or a related but independent construct. Results showed that experiential avoidance loads on the same factor as other emotion-focused and avoidant types of coping. The higher people are in experiential avoidance, the more they tend to utilize these types of coping strategies. Both experiential avoidance and coping predicted psychological distress and well-being, with most variance explained by coping but some additional variance explained by experiential avoidance. ANOVAS also showed gender differences in experiential avoidance and coping approaches. Results are discussed in light of previous relevant findings and future treatment relevant implications. Copyright © 2010 Elsevier Ltd. All rights reserved.

Influences of sampling volume and sample concentration on the analysis of atmospheric carbonyls by 2,4-dinitrophenylhydrazine cartridge.

PubMed

Pal, Raktim; Kim, Ki-Hyun

2008-03-10

In this study, the analytical bias involved in the application of the 2,4-dinitrophenylhydrazine (2,4-DNPH)-coated cartridge sampling method was investigated for the analysis of five atmospheric carbonyl species (i.e., acetaldehyde, propionaldehyde, butyraldehyde, isovaleraldehyde, and valeraldehyde). In order to evaluate the potential bias of the sampling technique, a series of the laboratory experiments were conducted to cover a wide range of volumes (1-20 L) and concentration levels (approximately 100-2000 ppb in case of acetaldehyde). The results of these experiments were then evaluated in terms of the recovery rate (RR) for each carbonyl species. The detection properties of these carbonyls were clearly distinguished between light and heavy species in terms of RR and its relative standard error (R.S.E.). It also indicates that the studied analytical approach can yield the most reliable pattern for light carbonyls, especially acetaldehyde. When these experimental results were tested further by a two-factor analysis of variance (ANOVA), the analysis based on the cartridge sampling method is affected more sensitively by the concentration levels of samples rather than the sampling volume.

Optimization of sol-gel technique for coating of metallic substrates by hydroxyapatite using the Taguchi method

NASA Astrophysics Data System (ADS)

Pourbaghi-Masouleh, M.; Asgharzadeh, H.

2013-08-01

In this study, the Taguchi method of design of experiment (DOE) was used to optimize the hydroxyapatite (HA) coatings on various metallic substrates deposited by sol-gel dip-coating technique. The experimental design consisted of five factors including substrate material (A), surface preparation of substrate (B), dipping/withdrawal speed (C), number of layers (D), and calcination temperature (E) with three levels of each factor. An orthogonal array of L18 type with mixed levels of the control factors was utilized. The image processing of the micrographs of the coatings was conducted to determine the percentage of coated area ( PCA). Chemical and phase composition of HA coatings were studied by XRD, FT-IR, SEM, and EDS techniques. The analysis of variance (ANOVA) indicated that the PCA of HA coatings was significantly affected by the calcination temperature. The optimum conditions from signal-to-noise ( S/N) ratio analysis were A: pure Ti, B: polishing and etching for 24 h, C: 50 cm min-1, D: 1, and E: 300 °C. In the confirmation experiment using the optimum conditions, the HA coating with high PCA of 98.5 % was obtained.

Optimization of Injection Molding Parameters for HDPE/TiO₂ Nanocomposites Fabrication with Multiple Performance Characteristics Using the Taguchi Method and Grey Relational Analysis.

PubMed

Pervez, Hifsa; Mozumder, Mohammad S; Mourad, Abdel-Hamid I

2016-08-22

The current study presents an investigation on the optimization of injection molding parameters of HDPE/TiO₂ nanocomposites using grey relational analysis with the Taguchi method. Four control factors, including filler concentration (i.e., TiO₂), barrel temperature, residence time and holding time, were chosen at three different levels of each. Mechanical properties, such as yield strength, Young's modulus and elongation, were selected as the performance targets. Nine experimental runs were carried out based on the Taguchi L₉ orthogonal array, and the data were processed according to the grey relational steps. The optimal process parameters were found based on the average responses of the grey relational grades, and the ideal operating conditions were found to be a filler concentration of 5 wt % TiO₂, a barrel temperature of 225 °C, a residence time of 30 min and a holding time of 20 s. Moreover, analysis of variance (ANOVA) has also been applied to identify the most significant factor, and the percentage of TiO₂ nanoparticles was found to have the most significant effect on the properties of the HDPE/TiO₂ nanocomposites fabricated through the injection molding process.

Improved cellulase production by Botryosphaeria rhodina from OPEFB at low level moisture condition through statistical optimization.

PubMed

Bahrin, E K; Ibrahim, M F; Abd Razak, M N; Abd-Aziz, S; Shah, U K Md; Alitheen, N; Salleh, M Md

2012-01-01

The response surface method was applied in this study to improve cellulase production from oil palm empty fruit bunch (OPEFB) by Botryosphaeria rhodina. An experimental design based on a two-level factorial was employed to screen the significant environmental factors for cellulase production. The locally isolated fungus Botryosphaeria rhodina was cultivated on OPEFB under solid-state fermentation (SSF). From the analysis of variance (ANOVA), the initial moisture content, amount of substrate, and initial pH of nutrient supplied in the SSF system significantly influenced cellulase production. Then the optimization of the variables was done using the response surface method according to central composite design (CCD). Botryosphaeria rhodina exhibited its best performance with a high predicted value of FPase enzyme production (17.95 U/g) when the initial moisture content was at 24.32%, initial pH of nutrient was 5.96, and 3.98 g of substrate was present. The statistical optimization from actual experiment resulted in a significant increment of FPase production from 3.26 to 17.91 U/g (5.49-fold). High cellulase production at low moisture content is a very rare condition for fungi cultured in solid-state fermentation.

In-situ structural integrity evaluation for high-power pulsed spallation neutron source - Effects of cavitation damage on structural vibration

NASA Astrophysics Data System (ADS)

Wan, Tao; Naoe, Takashi; Futakawa, Masatoshi

2016-01-01

A double-wall structure mercury target will be installed at the high-power pulsed spallation neutron source in the Japan Proton Accelerator Research Complex (J-PARC). Cavitation damage on the inner wall is an important factor governing the lifetime of the target-vessel. To monitor the structural integrity of the target vessel, displacement velocity at a point on the outer surface of the target vessel is measured using a laser Doppler vibrometer (LDV). The measured signals can be used for evaluating the damage inside the target vessel because of cyclic loading and cavitation bubble collapse caused by pulsed-beam induced pressure waves. The wavelet differential analysis (WDA) was applied to reveal the effects of the damage on vibrational cycling. To reduce the effects of noise superimposed on the vibration signals on the WDA results, analysis of variance (ANOVA) and analysis of covariance (ANCOVA), statistical methods were applied. Results from laboratory experiments, numerical simulation results with random noise added, and target vessel field data were analyzed by the WDA and the statistical methods. The analyses demonstrated that the established in-situ diagnostic technique can be used to effectively evaluate the structural response of the target vessel.

The relative age effect among elite youth competitive swimmers.

PubMed

Costa, Aldo M; Marques, Mário C; Louro, Hugo; Ferreira, Sandra S; Marinho, Daniel A

2013-01-01

The aim of this study was to analyse the relative age effect (RAE) in competitive swimming. The best 50 Portuguese swimmers (12- to 18-year-olds) for the main individual swimming pool events of both genders were considered. Analysis was conducted on 7813 swimming event participants, taking account of respective swimmer birth dates and the Fédération Internationale de Natation points gained. Differences in the distribution of birth dates by quarter year were determined using the Chi-square. A one-way analysis of variance ANOVA was used to test for differences measured in points between individuals by quarterly birth year intervals. A two-way analysis of variance ANOVA was also conducted to test the interaction between gender and seasonal birth date with regard to performance. The results show an inequitable distribution (p<0.01) of birth dates by quarter for almost all age groups and both genders. However, the distribution of birth dates by quarter for each considered swim event shows that RAE seems to exist only for 12-year-old females and 12- to 15-year-old males. Analysing mean swimming performance, post-hoc results (p<0.01) show no consistency in RAE. Higher performance occurs among older swimmers only in 100 m butterfly (female 1998, 1st≠2nd quarter, p=0.003). The results also show no interaction between gender and seasonal birth date (p<0.01). Findings of this study show that a higher number of swimmers, particular males, are born in the first two quarters of the year, although there is mostly no effect of seasonal birth date on performance differences within the top 50 swimmers.

Student Evaluation of Online Pharmaceutical Compounding Videos

PubMed Central

Park, Hanna L.

2016-01-01

Objective. To describe pharmacy students’ views on the effectiveness of an expansion of the compounding laboratory website at the UNC Eshelman School of Pharmacy. Methods. Originally, there were 39 videos and three animations available. In 2011, an additional 59 videos and two animations were added. Concurrently, all of the interactive questions were updated to fully integrate with the expanded video library. Students were surveyed about the expanded video library regarding accessibility, functionality, and usefulness, and how using the library impacted their learning of compounding. Surveys were analyzed with descriptive statistics. Means and SDs were calculated for the rating scale questions; independent t tests and Wilcoxon nonparametric tests were used to find differences between professional classes and campuses. Analytical results were evaluated with a one-way analysis of variance (ANOVA), z test, and a homogeneity of variance (Levene’s) test. Results. The response rate to the survey was 85%. Compounding videos were used by 386/391 students. Thirty-four percent of students used the videos an average of 30 minutes or less per week; 56% used the videos 1–2 hours per week. Approximately 80% of students were satisfied with the functionality and accessibility of the videos. All students, regardless of professional year or campus affiliation, put their confidence/competence at about 70% of the rating scale. Conclusions. As no standardized compounding curriculum was found in US schools of pharmacy and students reported being satisfied with the website, it could be an accessible, functional, and useful resource for pharmaceutical compounding in schools of pharmacy. PMID:27073283

Order-constrained linear optimization.

PubMed

Tidwell, Joe W; Dougherty, Michael R; Chrabaszcz, Jeffrey S; Thomas, Rick P

2017-11-01

Despite the fact that data and theories in the social, behavioural, and health sciences are often represented on an ordinal scale, there has been relatively little emphasis on modelling ordinal properties. The most common analytic framework used in psychological science is the general linear model, whose variants include ANOVA, MANOVA, and ordinary linear regression. While these methods are designed to provide the best fit to the metric properties of the data, they are not designed to maximally model ordinal properties. In this paper, we develop an order-constrained linear least-squares (OCLO) optimization algorithm that maximizes the linear least-squares fit to the data conditional on maximizing the ordinal fit based on Kendall's τ. The algorithm builds on the maximum rank correlation estimator (Han, 1987, Journal of Econometrics, 35, 303) and the general monotone model (Dougherty & Thomas, 2012, Psychological Review, 119, 321). Analyses of simulated data indicate that when modelling data that adhere to the assumptions of ordinary least squares, OCLO shows minimal bias, little increase in variance, and almost no loss in out-of-sample predictive accuracy. In contrast, under conditions in which data include a small number of extreme scores (fat-tailed distributions), OCLO shows less bias and variance, and substantially better out-of-sample predictive accuracy, even when the outliers are removed. We show that the advantages of OCLO over ordinary least squares in predicting new observations hold across a variety of scenarios in which researchers must decide to retain or eliminate extreme scores when fitting data. © 2017 The British Psychological Society.

Student Evaluation of Online Pharmaceutical Compounding Videos.

PubMed

Park, Hanna L; Shrewsbury, Robert P

2016-03-25

Objective. To describe pharmacy students' views on the effectiveness of an expansion of the compounding laboratory website at the UNC Eshelman School of Pharmacy. Methods. Originally, there were 39 videos and three animations available. In 2011, an additional 59 videos and two animations were added. Concurrently, all of the interactive questions were updated to fully integrate with the expanded video library. Students were surveyed about the expanded video library regarding accessibility, functionality, and usefulness, and how using the library impacted their learning of compounding. Surveys were analyzed with descriptive statistics. Means and SDs were calculated for the rating scale questions; independent t tests and Wilcoxon nonparametric tests were used to find differences between professional classes and campuses. Analytical results were evaluated with a one-way analysis of variance (ANOVA), z test, and a homogeneity of variance (Levene's) test. Results. The response rate to the survey was 85%. Compounding videos were used by 386/391 students. Thirty-four percent of students used the videos an average of 30 minutes or less per week; 56% used the videos 1-2 hours per week. Approximately 80% of students were satisfied with the functionality and accessibility of the videos. All students, regardless of professional year or campus affiliation, put their confidence/competence at about 70% of the rating scale. Conclusions. As no standardized compounding curriculum was found in US schools of pharmacy and students reported being satisfied with the website, it could be an accessible, functional, and useful resource for pharmaceutical compounding in schools of pharmacy.

Predicting bacteriophage proteins located in host cell with feature selection technique.

PubMed

Ding, Hui; Liang, Zhi-Yong; Guo, Feng-Biao; Huang, Jian; Chen, Wei; Lin, Hao

2016-04-01

A bacteriophage is a virus that can infect a bacterium. The fate of an infected bacterium is determined by the bacteriophage proteins located in the host cell. Thus, reliably identifying bacteriophage proteins located in the host cell is extremely important to understand their functions and discover potential anti-bacterial drugs. Thus, in this paper, a computational method was developed to recognize bacteriophage proteins located in host cells based only on their amino acid sequences. The analysis of variance (ANOVA) combined with incremental feature selection (IFS) was proposed to optimize the feature set. Using a jackknife cross-validation, our method can discriminate between bacteriophage proteins located in a host cell and the bacteriophage proteins not located in a host cell with a maximum overall accuracy of 84.2%, and can further classify bacteriophage proteins located in host cell cytoplasm and in host cell membranes with a maximum overall accuracy of 92.4%. To enhance the value of the practical applications of the method, we built a web server called PHPred (〈http://lin.uestc.edu.cn/server/PHPred〉). We believe that the PHPred will become a powerful tool to study bacteriophage proteins located in host cells and to guide related drug discovery. Copyright © 2016 Elsevier Ltd. All rights reserved.

Texture Feature Analysis for Different Resolution Level of Kidney Ultrasound Images

NASA Astrophysics Data System (ADS)

Kairuddin, Wan Nur Hafsha Wan; Mahmud, Wan Mahani Hafizah Wan

2017-08-01

Image feature extraction is a technique to identify the characteristic of the image. The objective of this work is to discover the texture features that best describe a tissue characteristic of a healthy kidney from ultrasound (US) image. Three ultrasound machines that have different specifications are used in order to get a different quality (different resolution) of the image. Initially, the acquired images are pre-processed to de-noise the speckle to ensure the image preserve the pixels in a region of interest (ROI) for further extraction. Gaussian Low- pass Filter is chosen as the filtering method in this work. 150 of enhanced images then are segmented by creating a foreground and background of image where the mask is created to eliminate some unwanted intensity values. Statistical based texture features method is used namely Intensity Histogram (IH), Gray-Level Co-Occurance Matrix (GLCM) and Gray-level run-length matrix (GLRLM).This method is depends on the spatial distribution of intensity values or gray levels in the kidney region. By using One-Way ANOVA in SPSS, the result indicated that three features (Contrast, Difference Variance and Inverse Difference Moment Normalized) from GLCM are not statistically significant; this concludes that these three features describe a healthy kidney characteristics regardless of the ultrasound image quality.

Sample entropy analysis for the estimating depth of anaesthesia through human EEG signal at different levels of unconsciousness during surgeries

PubMed Central

Fan, Shou-Zen; Abbod, Maysam F.

2018-01-01

Estimating the depth of anaesthesia (DoA) in operations has always been a challenging issue due to the underlying complexity of the brain mechanisms. Electroencephalogram (EEG) signals are undoubtedly the most widely used signals for measuring DoA. In this paper, a novel EEG-based index is proposed to evaluate DoA for 24 patients receiving general anaesthesia with different levels of unconsciousness. Sample Entropy (SampEn) algorithm was utilised in order to acquire the chaotic features of the signals. After calculating the SampEn from the EEG signals, Random Forest was utilised for developing learning regression models with Bispectral index (BIS) as the target. Correlation coefficient, mean absolute error, and area under the curve (AUC) were used to verify the perioperative performance of the proposed method. Validation comparisons with typical nonstationary signal analysis methods (i.e., recurrence analysis and permutation entropy) and regression methods (i.e., neural network and support vector machine) were conducted. To further verify the accuracy and validity of the proposed methodology, the data is divided into four unconsciousness-level groups on the basis of BIS levels. Subsequently, analysis of variance (ANOVA) was applied to the corresponding index (i.e., regression output). Results indicate that the correlation coefficient improved to 0.72 ± 0.09 after filtering and to 0.90 ± 0.05 after regression from the initial values of 0.51 ± 0.17. Similarly, the final mean absolute error dramatically declined to 5.22 ± 2.12. In addition, the ultimate AUC increased to 0.98 ± 0.02, and the ANOVA analysis indicates that each of the four groups of different anaesthetic levels demonstrated significant difference from the nearest levels. Furthermore, the Random Forest output was extensively linear in relation to BIS, thus with better DoA prediction accuracy. In conclusion, the proposed method provides a concrete basis for monitoring patients’ anaesthetic level during surgeries. PMID:29844970

An investigative comparison of purging and non-purging groundwater sampling methods in Karoo aquifer monitoring wells

NASA Astrophysics Data System (ADS)

Gomo, M.; Vermeulen, D.

2015-03-01

An investigation was conducted to statistically compare the influence of non-purging and purging groundwater sampling methods on analysed inorganic chemistry parameters and calculated saturation indices. Groundwater samples were collected from 15 monitoring wells drilled in Karoo aquifers before and after purging for the comparative study. For the non-purging method, samples were collected from groundwater flow zones located in the wells using electrical conductivity (EC) profiling. The two data sets of non-purged and purged groundwater samples were analysed for inorganic chemistry parameters at the Institute of Groundwater Studies (IGS) laboratory of the Free University in South Africa. Saturation indices for mineral phases that were found in the data base of PHREEQC hydrogeochemical model were calculated for each data set. Four one-way ANOVA tests were conducted using Microsoft excel 2007 to investigate if there is any statistically significant difference between: (1) all inorganic chemistry parameters measured in the non-purged and purged groundwater samples per each specific well, (2) all mineral saturation indices calculated for the non-purged and purged groundwater samples per each specific well, (3) individual inorganic chemistry parameters measured in the non-purged and purged groundwater samples across all wells and (4) Individual mineral saturation indices calculated for non-purged and purged groundwater samples across all wells. For all the ANOVA tests conducted, the calculated alpha values (p) are greater than 0.05 (significance level) and test statistic (F) is less than the critical value (Fcrit) (F < Fcrit). The results imply that there was no statistically significant difference between the two data sets. With a 95% confidence, it was therefore concluded that the variance between groups was rather due to random chance and not to the influence of the sampling methods (tested factor). It is therefore be possible that in some hydrogeologic conditions, non-purged groundwater samples might be just as representative as the purged ones. The findings of this study can provide an important platform for future evidence oriented research investigations to establish the necessity of purging prior to groundwater sampling in different aquifer systems.

Effect of electrical energy on the efficacy of biofilm treatment using the bioelectric effect

PubMed Central

Kim, Young Wook; Subramanian, Sowmya; Gerasopoulos, Konstantinos; Ben-Yoav, Hadar; Wu, Hsuan-Chen; Quan, David; Carter, Karen; Meyer, Mariana T; Bentley, William E; Ghodssi, Reza

2015-01-01

Background/Objectives: The use of electric fields in combination with small doses of antibiotics for enhanced treatment of biofilms is termed the ‘bioelectric effect’ (BE). Different mechanisms of action for the AC and DC fields have been reported in the literature over the last two decades. In this work, we conduct the first study on the correlation between the electrical energy and the treatment efficacy of the bioelectric effect on Escherichia coli K-12 W3110 biofilms. Methods: A thorough study was performed through the application of alternating (AC), direct (DC) and superimposed (SP) potentials of different amplitudes on mature E. coli biofilms. The electric fields were applied in combination with the antibiotic gentamicin (10 μg/ml) over a course of 24 h, after the biofilms had matured for 24 h. The biofilms were analysed using the crystal violet assay, the colony-forming unit method and fluorescence microscopy. Results: Results show that there is no statistical difference in treatment efficacy between the DC-, AC- and SP-based BE treatment of equivalent energies (analysis of variance (ANOVA) P>0.05) for voltages <1 V. We also demonstrate that the efficacy of the BE treatment as measured by the crystal violet staining method and colony-forming unit assay is proportional to the electrical energy applied (ANOVA P<0.05). We further verify that the treatment efficacy varies linearly with the energy of the BE treatment (r2 =0.984). Our results thus suggest that the energy of the electrical signal is the primary factor in determining the efficacy of the BE treatment, at potentials less than the media electrolysis voltage. Conclusions: Our results demonstrate that the energy of the electrical signal, and not the type of electrical signal (AC or DC or SP), is the key to determine the efficacy of the BE treatment. We anticipate that this observation will pave the way for further understanding of the mechanism of action of the BE treatment method and may open new doors to the use of electric fields in the treatment of bacterial biofilms. PMID:28721233

Uncertainty Analysis for a Jet Flap Airfoil

NASA Technical Reports Server (NTRS)

Green, Lawrence L.; Cruz, Josue

2006-01-01

An analysis of variance (ANOVA) study was performed to quantify the potential uncertainties of lift and pitching moment coefficient calculations from a computational fluid dynamics code, relative to an experiment, for a jet flap airfoil configuration. Uncertainties due to a number of factors including grid density, angle of attack and jet flap blowing coefficient were examined. The ANOVA software produced a numerical model of the input coefficient data, as functions of the selected factors, to a user-specified order (linear, 2-factor interference, quadratic, or cubic). Residuals between the model and actual data were also produced at each of the input conditions, and uncertainty confidence intervals (in the form of Least Significant Differences or LSD) for experimental, computational, and combined experimental / computational data sets were computed. The LSD bars indicate the smallest resolvable differences in the functional values (lift or pitching moment coefficient) attributable solely to changes in independent variable, given just the input data points from selected data sets. The software also provided a collection of diagnostics which evaluate the suitability of the input data set for use within the ANOVA process, and which examine the behavior of the resultant data, possibly suggesting transformations which should be applied to the data to reduce the LSD. The results illustrate some of the key features of, and results from, the uncertainty analysis studies, including the use of both numerical (continuous) and categorical (discrete) factors, the effects of the number and range of the input data points, and the effects of the number of factors considered simultaneously.

Respiratory Mechanics and Plasma Levels of Tumor Necrosis Factor Alpha and Interleukin 6 Are Affected by Gas Humidification during Mechanical Ventilation in Dogs

PubMed Central

Hernández-Jiménez, Claudia; García-Torrentera, Rogelio; Olmos-Zúñiga, J. Raúl; Jasso-Victoria, Rogelio; Gaxiola-Gaxiola, Miguel O.; Baltazares-Lipp, Matilde; Gutiérrez-González, Luis H.

2014-01-01

The use of dry gases during mechanical ventilation has been associated with the risk of serious airway complications. The goal of the present study was to quantify the plasma levels of TNF-alpha and IL-6 and to determine the radiological, hemodynamic, gasometric, and microscopic changes in lung mechanics in dogs subjected to short-term mechanical ventilation with and without humidification of the inhaled gas. The experiment was conducted for 24 hours in 10 dogs divided into two groups: Group I (n = 5), mechanical ventilation with dry oxygen dispensation, and Group II (n = 5), mechanical ventilation with oxygen dispensation using a moisture chamber. Variance analysis was used. No changes in physiological, hemodynamic, or gasometric, and radiographic constants were observed. Plasma TNF-alpha levels increased in group I, reaching a maximum 24 hours after mechanical ventilation was initiated (ANOVA p = 0.77). This increase was correlated to changes in mechanical ventilation. Plasma IL-6 levels decreased at 12 hours and increased again towards the end of the study (ANOVA p>0.05). Both groups exhibited a decrease in lung compliance and functional residual capacity values, but this was more pronounced in group I. Pplat increased in group I (ANOVA p = 0.02). Inhalation of dry gas caused histological lesions in the entire respiratory tract, including pulmonary parenchyma, to a greater extent than humidified gas. Humidification of inspired gases can attenuate damage associated with mechanical ventilation. PMID:25036811

Respiratory mechanics and plasma levels of tumor necrosis factor alpha and interleukin 6 are affected by gas humidification during mechanical ventilation in dogs.

PubMed

Hernández-Jiménez, Claudia; García-Torrentera, Rogelio; Olmos-Zúñiga, J Raúl; Jasso-Victoria, Rogelio; Gaxiola-Gaxiola, Miguel O; Baltazares-Lipp, Matilde; Gutiérrez-González, Luis H

2014-01-01

The use of dry gases during mechanical ventilation has been associated with the risk of serious airway complications. The goal of the present study was to quantify the plasma levels of TNF-alpha and IL-6 and to determine the radiological, hemodynamic, gasometric, and microscopic changes in lung mechanics in dogs subjected to short-term mechanical ventilation with and without humidification of the inhaled gas. The experiment was conducted for 24 hours in 10 dogs divided into two groups: Group I (n = 5), mechanical ventilation with dry oxygen dispensation, and Group II (n = 5), mechanical ventilation with oxygen dispensation using a moisture chamber. Variance analysis was used. No changes in physiological, hemodynamic, or gasometric, and radiographic constants were observed. Plasma TNF-alpha levels increased in group I, reaching a maximum 24 hours after mechanical ventilation was initiated (ANOVA p = 0.77). This increase was correlated to changes in mechanical ventilation. Plasma IL-6 levels decreased at 12 hours and increased again towards the end of the study (ANOVA p>0.05). Both groups exhibited a decrease in lung compliance and functional residual capacity values, but this was more pronounced in group I. Pplat increased in group I (ANOVA p = 0.02). Inhalation of dry gas caused histological lesions in the entire respiratory tract, including pulmonary parenchyma, to a greater extent than humidified gas. Humidification of inspired gases can attenuate damage associated with mechanical ventilation.

Anterior Tibial Translation in Collegiate Athletes with Normal Anterior Cruciate Ligament Integrity

PubMed Central

Rosene, John M.; Fogarty, Tracey D.

1999-01-01

Objective: To examine differences in anterior tibial translation (ATT) among sports, sex, and leg dominance in collegiate athletes with normal anterior cruciate ligament integrity. Design and Setting: Subjects from various athletic teams were measured for ATT in right and left knees. Subjects: Sixty subjects were measured for ATT with a KT-1000 knee arthrometer. Measurements: Statistical analyses were computed for each sex and included a 2 × 3 × 4 mixed-factorial analysis of variance (ANOVA) for anterior cruciate ligament displacement, right and left sides, and force and sport. A 2 × 2 × 3 mixed-factorial ANOVA was computed to compare means for sex and force. A 2 × 3 mixed-factorial ANOVA was computed to compare sex differences across 3 forces. Results: For males and females, no significant interactions were found among leg, force, and sport for mean ATT, for leg and sport or leg and force, or for translation values between dominant and nondominant legs. Males had a significant interaction for force and sport, and a significant difference was found for side of body, since the right side had less translation than the left side. Females had greater ATT than males at all forces. Conclusions: Sex differences exist for ATT, and differences in ATT exist among sports for both sexes. Differences between the right and left sides of the body should be expected when making comparisons of ligamentous laxity. ImagesFigure 2.Figure 3.Figure 5. PMID:16558565

Evaluation of the three-dimensional accuracy of implant impression techniques in two simulated clinical conditions by optical scanning.

PubMed

Sabouhi, Mahmoud; Bajoghli, Farshad; Abolhasani, Majid

2015-01-01

The success of an implant-supported prosthesis is dependent on the passive fit of its framework fabricated on a precise cast. The aim of this in vitro study was to digitally compare the three-dimensional accuracy of implant impression techniques in partially and completely edentulous conditions. The master model simulated two clinical conditions. The first condition was a partially edentulous mandibular arch with an anterior edentulous space (D condition). Two implant analogs were inserted in bilateral canine sites. After elimination of the teeth, the model was converted to a completely edentulous condition (E condition). Three different impression techniques were performed (open splinted [OS], open unsplinted [OU], closed [C]) for each condition. Six groups of casts (DOS, DOU, DC, EOS, EOU, EC) (n = 8), totaling 48 casts, were made. Two scan bodies were secured onto the master edentulous model and onto each test cast and digitized by an optical scanning system. The related scans were superimposed, and the mean discrepancy for each cast was determined. The statistical analysis showed no significant difference in the accuracy of casts as a function of model status (P = .78, analysis of variance [ANOVA] test), impression technique (P = .57, ANOVA test), or as the combination of both (P = .29, ANOVA test). The distribution of data was normal (Kolmogorov-Smirnov test). Model status (dentate or edentulous) and impression technique did not influence the precision of the casts. There is no difference among any of the impression techniques in either simulated clinical condition.

Performance of the Santa Ines breed raised on pasture in semiarid tropical regions and factors that explain trait variation.

PubMed

de Farias Jucá, Adriana; Faveri, Juliana Cantos; Melo Filho, Geraldo Magalhães; de Lisboa Ribeiro Filho, Antônio; Azevedo, Hymerson Costa; Muniz, Evandro Neves; Pinto, Luís Fernando Batista

2014-10-01

This study aimed to evaluate sex, the number of lambs per birth, and the family effects on production traits in the Santa Ines breed of sheep by estimating the least square means and coefficient of variance for those traits. A total of 484 lambs were evaluated for the following traits: weight at birth, at weaning, and at 240 days of age; weight gain during the pre-weaning and post-weaning periods; height, width, and length of different body regions; and rib eye area and fat thickness between the 12th and 13th ribs. We observed coefficients of variation higher than 10 % for several traits. Generally, males were larger than females (P < 0.05), while lambs from single and double births were larger than lambs from triple births (P < 0.05). Family effect was significant (P < 0.05) for most traits and explained the highest percentage of residual variance. The results showed good development of Santa Ines sheep, especially during the pre-weaning period but no in post-weaning. Our study also showed that there is an effect of sex, birth type, and family, which must be included in any statistical model for the estimation of least square means and residual variance in ANOVA.

New model for prediction binary mixture of antihistamine decongestant using artificial neural networks and least squares support vector machine by spectrophotometry method

NASA Astrophysics Data System (ADS)

Mofavvaz, Shirin; Sohrabi, Mahmoud Reza; Nezamzadeh-Ejhieh, Alireza

2017-07-01

In the present study, artificial neural networks (ANNs) and least squares support vector machines (LS-SVM) as intelligent methods based on absorption spectra in the range of 230-300 nm have been used for determination of antihistamine decongestant contents. In the first step, one type of network (feed-forward back-propagation) from the artificial neural network with two different training algorithms, Levenberg-Marquardt (LM) and gradient descent with momentum and adaptive learning rate back-propagation (GDX) algorithm, were employed and their performance was evaluated. The performance of the LM algorithm was better than the GDX algorithm. In the second one, the radial basis network was utilized and results compared with the previous network. In the last one, the other intelligent method named least squares support vector machine was proposed to construct the antihistamine decongestant prediction model and the results were compared with two of the aforementioned networks. The values of the statistical parameters mean square error (MSE), Regression coefficient (R2), correlation coefficient (r) and also mean recovery (%), relative standard deviation (RSD) used for selecting the best model between these methods. Moreover, the proposed methods were compared to the high- performance liquid chromatography (HPLC) as a reference method. One way analysis of variance (ANOVA) test at the 95% confidence level applied to the comparison results of suggested and reference methods that there were no significant differences between them.

A COMPARISON OF GREEN SUPPLY CHAIN MANAGEMENT PRACTICES AMONG INDUSTRIES SECTORS IN CHINA

NASA Astrophysics Data System (ADS)

Sun, Ying; Miyadera, Tetsuhiko; Fujita, Tsuyoshi

This paper aims to examine the differences of Green supply chain management (GSCM) implementation among chemical, automobile and machinery industries in China based on a questionnaire survey designed by Industrial Ecology at two industrial parks in Shenyang city. Exploratory factor analysis and one way analysis of variance (ANOVA) were used to analyze the data. The main result was that the GSCM practices of the three industries are still at a beginning stage. The level of GSCM practices of automobile industry (promoted by international market competition) was higher than those of chemical and machinery industry (promoted by domestic laws and policies).

Time-frequency analysis of human motion during rhythmic exercises.

PubMed

Omkar, S N; Vyas, Khushi; Vikranth, H N

2011-01-01

Biomechanical signals due to human movements during exercise are represented in time-frequency domain using Wigner Distribution Function (WDF). Analysis based on WDF reveals instantaneous spectral and power changes during a rhythmic exercise. Investigations were carried out on 11 healthy subjects who performed 5 cycles of sun salutation, with a body-mounted Inertial Measurement Unit (IMU) as a motion sensor. Variance of Instantaneous Frequency (I.F) and Instantaneous Power (I.P) for performance analysis of the subject is estimated using one-way ANOVA model. Results reveal that joint Time-Frequency analysis of biomechanical signals during motion facilitates a better understanding of grace and consistency during rhythmic exercise.

Nano-ZnO/ZnO-HAPw prepared via sol-gel method and antibacterial activities of inorganic agents on six bacteria associated with oral infections

NASA Astrophysics Data System (ADS)

Jin, Jianfeng; Liu, Wenying; Zhang, Wenyun; Chen, Qinghua; Yuan, Yanbo; Yang, Lidou; Wang, Qintao

2014-10-01

The antibacterial activity of zinc oxide (ZnO) and the strengthening of hydroxylapatite whiskers (HAPws) have been widely studied and applied. However, the antibacterial properties of ZnO-HAPws have scarcely been researched. The aim of this study was to further investigate several types of nano-ZnO morphologies of ZnO-HAPws that were prepared using the sol-gel method at different pondus hydrogenii (pH) values and temperatures. The four morphologies of ZnO-HAPws that were investigated here were granule, triangle, short rod and disc type, and these morphologies were investigated at 70 °C at pH 6.4, 37 °C at pH 6.6, 70 °C at pH 6.6 and 70 °C at pH 6.6, respectively. Next, the antibacterial activity of ZnO-HAPw was compared to that of nano-ZnO, commercially available ZnO and tetrapod-like ZnO whiskers (T-ZnOw) with six bacteria that are associated with oral infections: Streptococcus mutans, Lactobacillus casei, Candida albicans, Actinomyces viscosus, Staphylococcus aureus and Escherichia coli. The results of examinations of the minimal inhibitory concentrations (MICs) and minimal bactericidal concentrations (MBCs) showed that the antibacterial activity of ZnO-HAPw exceeded that of the commercially available ZnO and T-ZnOw. Additionally, analysis of variance (ANOVA) analysis of the MBCs revealed that the four tested antibacterial agents had significantly different effects on S. mutans ( F = 8.940; P = 0.006), S. aureus ( F = 6.924; P = 0.013) and E. coli ( F = 4.468; P = 0.04). ANOVA analyses of the MICs revealed that the four tested antibacterial agents had significantly different effects on S. mutans ( F = 6.183; P = 0.018), A. viscosus ( F = 4.531; P = 0.039) and S. aureus ( F = 18.976; P = 0.001).

Does the Rotator Cuff Tear Pattern Influence Clinical Outcomes After Surgical Repair?

PubMed Central

Watson, Scott; Allen, Benjamin; Robbins, Chris; Bedi, Asheesh; Gagnier, Joel J.; Miller, Bruce

2018-01-01

Background: Limited literature exists regarding the influence of rotator cuff tear morphology on patient outcomes. Purpose: To determine the effect of rotator cuff tear pattern (crescent, U-shape, L-shape) on patient-reported outcomes after rotator cuff repair. Study Design: Cohort study; Level of evidence, 3. Methods: Patients undergoing arthroscopic repair of known full-thickness rotator cuff tears were observed prospectively at regular intervals from baseline to 1 year. The tear pattern was classified at the time of surgery as crescent, U-shaped, or L-shaped. Primary outcome measures were the Western Ontario Rotator Cuff Index (WORC), the American Shoulder and Elbow Surgeons (ASES), and a visual analog scale (VAS) for pain. The tear pattern was evaluated as the primary predictor while controlling for variables known to affect rotator cuff outcomes. Mixed-methods regression and analysis of variance (ANOVA) were used to examine the effects of tear morphology on patient-reported outcomes after surgical repair from baseline to 1 year. Results: A total of 82 patients were included in the study (53 male, 29 female; mean age, 58 years [range, 41-75 years]). A crescent shape was the most common tear pattern (54%), followed by U-shaped (25%) and L-shaped tears (21%). There were no significant differences in outcome scores between the 3 groups at baseline. All 3 groups showed statistically significant improvement from baseline to 1 year, but analysis failed to show any predictive effect in the change in outcome scores from baseline to 1 year for the WORC, ASES, or VAS when tear pattern was the primary predictor. Further ANOVA also failed to show any significant difference in the change in outcome scores from baseline to 1 year for the WORC (P = .96), ASES (P = .71), or VAS (P = .86). Conclusion: Rotator cuff tear pattern is not a predictor of functional outcomes after arthroscopic rotator cuff repair. PMID:29623283

Comparison of prosthetic models produced by traditional and additive manufacturing methods.

PubMed

Park, Jin-Young; Kim, Hae-Young; Kim, Ji-Hwan; Kim, Jae-Hong; Kim, Woong-Chul

2015-08-01

The purpose of this study was to verify the clinical-feasibility of additive manufacturing by comparing the accuracy of four different manufacturing methods for metal coping: the conventional lost wax technique (CLWT); subtractive methods with wax blank milling (WBM); and two additive methods, multi jet modeling (MJM), and micro-stereolithography (Micro-SLA). Thirty study models were created using an acrylic model with the maxillary upper right canine, first premolar, and first molar teeth. Based on the scan files from a non-contact blue light scanner (Identica; Medit Co. Ltd., Seoul, Korea), thirty cores were produced using the WBM, MJM, and Micro-SLA methods, respectively, and another thirty frameworks were produced using the CLWT method. To measure the marginal and internal gap, the silicone replica method was adopted, and the silicone images obtained were evaluated using a digital microscope (KH-7700; Hirox, Tokyo, Japan) at 140X magnification. Analyses were performed using two-way analysis of variance (ANOVA) and Tukey post hoc test (α=.05). The mean marginal gaps and internal gaps showed significant differences according to tooth type (P<.001 and P<.001, respectively) and manufacturing method (P<.037 and P<.001, respectively). Micro-SLA did not show any significant difference from CLWT regarding mean marginal gap compared to the WBM and MJM methods. The mean values of gaps resulting from the four different manufacturing methods were within a clinically allowable range, and, thus, the clinical use of additive manufacturing methods is acceptable as an alternative to the traditional lost wax-technique and subtractive manufacturing.

Uncertainty Analysis of Historical Hurricane Data

NASA Technical Reports Server (NTRS)

Green, Lawrence L.

2007-01-01

An analysis of variance (ANOVA) study was conducted for historical hurricane data dating back to 1851 that was obtained from the U. S. Department of Commerce National Oceanic and Atmospheric Administration (NOAA). The data set was chosen because it is a large, publicly available collection of information, exhibiting great variability which has made the forecasting of future states, from current and previous states, difficult. The availability of substantial, high-fidelity validation data, however, made for an excellent uncertainty assessment study. Several factors (independent variables) were identified from the data set, which could potentially influence the track and intensity of the storms. The values of these factors, along with the values of responses of interest (dependent variables) were extracted from the data base, and provided to a commercial software package for processing via the ANOVA technique. The primary goal of the study was to document the ANOVA modeling uncertainty and predictive errors in making predictions about hurricane location and intensity 24 to 120 hours beyond known conditions, as reported by the data set. A secondary goal was to expose the ANOVA technique to a broader community within NASA. The independent factors considered to have an influence on the hurricane track included the current and starting longitudes and latitudes (measured in degrees), and current and starting maximum sustained wind speeds (measured in knots), and the storm starting date, its current duration from its first appearance, and the current year fraction of each reading, all measured in years. The year fraction and starting date were included in order to attempt to account for long duration cyclic behaviors, such as seasonal weather patterns, and years in which the sea or atmosphere were unusually warm or cold. The effect of short duration weather patterns and ocean conditions could not be examined with the current data set. The responses analyzed were the storm latitude, longitude and intensity, as recorded in the data set, 24 or 120 hours beyond the current state. Several ANOVA modeling schemes were examined. Two forms of validation were used: 1) comparison with official hurricane prediction performance metrics and 2) cases studies conducted on hurricanes from the 2005 season, which were not included within the model construction and ANOVA assessment. In general, the ANOVA technique did not perform as well as the established official prediction performance metrics published by NOAA; still, the technique did remarkably well in this demonstration with a difficult data set and could probably be made to perform better with more knowledge of hurricane development and dynamics applied to the problem. The technique provides a repeatable prediction process that eliminates the need for judgment in the forecast.

Salt stress-induced transcription of σB- and CtsR-regulated genes in persistent and non-persistent Listeria monocytogenes strains from food processing plants.

PubMed

Ringus, Daina L; Ivy, Reid A; Wiedmann, Martin; Boor, Kathryn J

2012-03-01

Listeria monocytogenes is a foodborne pathogen that can persist in food processing environments. Six persistent and six non-persistent strains from fish processing plants and one persistent strain from a meat plant were selected to determine if expression of genes in the regulons of two stress response regulators, σ(B) and CtsR, under salt stress conditions is associated with the ability of L. monocytogenes to persist in food processing environments. Subtype data were also used to categorize the strains into genetic lineages I or II. Quantitative reverse transcriptase-polymerase chain reaction (qRT-PCR) was used to measure transcript levels for two σ(B)-regulated genes, inlA and gadD3, and two CtsR-regulated genes, lmo1138 and clpB, before and after (t=10 min) salt shock (i.e., exposure of exponential phase cells to BHI+6% NaCl for 10 min at 37°C). Exposure to salt stress induced higher transcript levels relative to levels under non-stress conditions for all four stress and virulence genes across all wildtype strains tested. Analysis of variance (ANOVA) of induction data revealed that transcript levels for one gene (clpB) were induced at significantly higher levels in non-persistent strains compared to persistent strains (p=0.020; two-way ANOVA). Significantly higher transcript levels of gadD3 (p=0.024; two-way ANOVA) and clpB (p=0.053; two-way ANOVA) were observed after salt shock in lineage I strains compared to lineage II strains. No clear association between stress gene transcript levels and persistence was detected. Our data are consistent with an emerging model that proposes that establishment of L. monocytogenes persistence in a specific environment occurs as a random, stochastic event, rather than as a consequence of specific bacterial strain characteristics.

Spectroflourometric and spectrophotometric methods for the determination of sitagliptin in binary mixture with metformin and ternary mixture with metformin and sitagliptin alkaline degradation product.

PubMed

El-Bagary, Ramzia I; Elkady, Ehab F; Ayoub, Bassam M

2011-03-01

Simple, accurate and precise spectroflourometric and spectrophotometric methods have been developed and validated for the determination of sitagliptin phosphate monohydrate (STG) and metformin HCL (MET). Zero order, first derivative, ratio derivative spectrophotometric methods and flourometric methods have been developed. The zero order spectrophotometric method was used for the determination of STG in the range of 50-300 μg mL(-1). The first derivative spectrophotometric method was used for the determination of MET in the range of 2-12 μg mL(-1) and STG in the range of 50-300 μg mL(-1) by measuring the peak amplitude at 246.5 nm and 275 nm, respectively. The first derivative of ratio spectra spectrophotometric method used the peak amplitudes at 232 nm and 239 nm for the determination of MET in the range of 2-12 μg mL(-1). The flourometric method was used for the determination of STG in the range of 0.25-110 μg mL(-1). The proposed methods used to determine each drug in binary mixture with metformin and ternary mixture with metformin and sitagliptin alkaline degradation product that is obtained after alkaline hydrolysis of sitagliptin. The results were statistically compared using one-way analysis of variance (ANOVA). The methods developed were satisfactorily applied to the analysis of the pharmaceutical formulations and proved to be specific and accurate for the quality control of the cited drugs in pharmaceutical dosage forms.

Spectroflourometric and Spectrophotometric Methods for the Determination of Sitagliptin in Binary Mixture with Metformin and Ternary Mixture with Metformin and Sitagliptin Alkaline Degradation Product

PubMed Central

El-Bagary, Ramzia I.; Elkady, Ehab F.; Ayoub, Bassam M.

2011-01-01

Simple, accurate and precise spectroflourometric and spectrophotometric methods have been developed and validated for the determination of sitagliptin phosphate monohydrate (STG) and metformin HCL (MET). Zero order, first derivative, ratio derivative spectrophotometric methods and flourometric methods have been developed. The zero order spectrophotometric method was used for the determination of STG in the range of 50-300 μg mL-1. The first derivative spectrophotometric method was used for the determination of MET in the range of 2–12 μg mL-1 and STG in the range of 50-300 μg mL-1 by measuring the peak amplitude at 246.5 nm and 275 nm, respectively. The first derivative of ratio spectra spectrophotometric method used the peak amplitudes at 232 nm and 239 nm for the determination of MET in the range of 2–12 μg mL-1. The flourometric method was used for the determination of STG in the range of 0.25-110 μg mL-1. The proposed methods used to determine each drug in binary mixture with metformin and ternary mixture with metformin and sitagliptin alkaline degradation product that is obtained after alkaline hydrolysis of sitagliptin. The results were statistically compared using one-way analysis of variance (ANOVA). The methods developed were satisfactorily applied to the analysis of the pharmaceutical formulations and proved to be specific and accurate for the quality control of the cited drugs in pharmaceutical dosage forms. PMID:23675222

A nonparametric mean-variance smoothing method to assess Arabidopsis cold stress transcriptional regulator CBF2 overexpression microarray data.

PubMed

Hu, Pingsha; Maiti, Tapabrata

2011-01-01

Microarray is a powerful tool for genome-wide gene expression analysis. In microarray expression data, often mean and variance have certain relationships. We present a non-parametric mean-variance smoothing method (NPMVS) to analyze differentially expressed genes. In this method, a nonlinear smoothing curve is fitted to estimate the relationship between mean and variance. Inference is then made upon shrinkage estimation of posterior means assuming variances are known. Different methods have been applied to simulated datasets, in which a variety of mean and variance relationships were imposed. The simulation study showed that NPMVS outperformed the other two popular shrinkage estimation methods in some mean-variance relationships; and NPMVS was competitive with the two methods in other relationships. A real biological dataset, in which a cold stress transcription factor gene, CBF2, was overexpressed, has also been analyzed with the three methods. Gene ontology and cis-element analysis showed that NPMVS identified more cold and stress responsive genes than the other two methods did. The good performance of NPMVS is mainly due to its shrinkage estimation for both means and variances. In addition, NPMVS exploits a non-parametric regression between mean and variance, instead of assuming a specific parametric relationship between mean and variance. The source code written in R is available from the authors on request.

A Nonparametric Mean-Variance Smoothing Method to Assess Arabidopsis Cold Stress Transcriptional Regulator CBF2 Overexpression Microarray Data

PubMed Central

Hu, Pingsha; Maiti, Tapabrata

2011-01-01

Microarray is a powerful tool for genome-wide gene expression analysis. In microarray expression data, often mean and variance have certain relationships. We present a non-parametric mean-variance smoothing method (NPMVS) to analyze differentially expressed genes. In this method, a nonlinear smoothing curve is fitted to estimate the relationship between mean and variance. Inference is then made upon shrinkage estimation of posterior means assuming variances are known. Different methods have been applied to simulated datasets, in which a variety of mean and variance relationships were imposed. The simulation study showed that NPMVS outperformed the other two popular shrinkage estimation methods in some mean-variance relationships; and NPMVS was competitive with the two methods in other relationships. A real biological dataset, in which a cold stress transcription factor gene, CBF2, was overexpressed, has also been analyzed with the three methods. Gene ontology and cis-element analysis showed that NPMVS identified more cold and stress responsive genes than the other two methods did. The good performance of NPMVS is mainly due to its shrinkage estimation for both means and variances. In addition, NPMVS exploits a non-parametric regression between mean and variance, instead of assuming a specific parametric relationship between mean and variance. The source code written in R is available from the authors on request. PMID:21611181

Ex Post Facto Monte Carlo Variance Reduction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Booth, Thomas E.

The variance in Monte Carlo particle transport calculations is often dominated by a few particles whose importance increases manyfold on a single transport step. This paper describes a novel variance reduction method that uses a large importance change as a trigger to resample the offending transport step. That is, the method is employed only after (ex post facto) a random walk attempts a transport step that would otherwise introduce a large variance in the calculation.Improvements in two Monte Carlo transport calculations are demonstrated empirically using an ex post facto method. First, the method is shown to reduce the variance inmore » a penetration problem with a cross-section window. Second, the method empirically appears to modify a point detector estimator from an infinite variance estimator to a finite variance estimator.« less

Effect of different surface treatments on the push-out bond strength of fiber post to root canal dentin.

PubMed

Demiryürek, Ebru Ozsezer; Külünk, Safak; Saraç, Duygu; Yüksel, Gözde; Bulucu, Bilinç

2009-08-01

The purpose of this study was to evaluate the effects of different surface treatments on the bond strength of a fiber post to dentin. Sixty extracted human maxillary incisor teeth were manually shaped with K-files using the step-back technique. ISO size 45 files were used as master apical files. Post spaces were prepared and then the root canals were subjected to one of the following 5 surface treatments: irrigation with 5% sodium hypochlorite (NaOCl); treatment with ethanol, ethyl acetate, and acetone-based cleansing agent (Sikko Tim); irrigation with 17% EDTA; etching with 37% orthophosphoric acid for 15 seconds; and etching with 10% citric acid for 15 seconds. Fiber posts were luted using self-etching/self-priming dual polymerized resin cement. From the coronal part of each root, 3 slides of 0.6-mm thickness were obtained. A push-out bond strength test was performed by a universal testing machine at a crosshead speed of 0.5 mm/min. Dentin surfaces were examined under scanning electron microscopy (SEM) after different surface treatments. Data were analyzed with a one-way analysis of variance (ANOVA) and Tukey HSD test. ANOVA revealed that canal surface treatment affected the bond strength (P < .001). The highest bond strength was obtained in the Sikko Tim group. The results also showed that surface treatment methods increased the bond strength to dentin when compared with the control group. Sikko Tim group was the more effective surface treatment agent compared with EDTA, orthophosphoric acid, citric acid, and control groups; however, it could not remove the smear layer and sealer remnants effectively on radicular dentin surfaces. Removal of the smear layer and opening of dentinal tubules are not recommended when a self-etching/self-priming adhesive system is used.

Knowledge and Attitudes toward HIV, Hepatitis B Virus, and Hepatitis C Virus Infection among Health-care Workers in Malawi.

PubMed

Mtengezo, Jasintha; Lee, Haeok; Ngoma, Jonathan; Kim, Susie; Aronowitz, Teri; DeMarco, Rosanna; Shi, Ling

2016-01-01

The highest prevalence of HIV infection occurs in Sub-Saharan Africa and hepatitis B virus (HBV), and hepatitis C virus (HCV) prevalence are the second highest in Sub-Saharan Africa including Malawi. Health-care workers (HCWs) play an important role in the prevention of, response to, and management of these infectious diseases. There is, however, no published research about the level of knowledge and attitudes toward HIV, HBV, and HCV infection among Malawian HCWs. The purpose of this study was to explore and determine the knowledge of and attitudes toward HIV, HBV, and HCV among a targeted population of Malawian HCWs. A cross-sectional community-based participatory research with 194 HCWs was completed employing health survey method. The project was a collaborative effort between nursing faculties in the USA and Malawian. A one-way analysis of variance (ANOVA) with the Bonferroni adjustment for multiple comparisons was used to assess the differences in knowledge and attitude among three subgroups of HCWs. Of 194 of Malawian HCWs surveyed, 41% were support staff, 37% were nursing students, and 22% were health-care professionals. Both health-care professionals and support staff had high knowledge scores related to HIV/AIDS, and their attitudes were mainly positive. However, a series of one-way ANOVAs revealed significant differences in knowledge and attitude toward HIV/AIDs, HBV, and HCV among HCWs ( P < 0.01). The majority had less knowledge about HBV and HCV and more negative attitudes toward hepatitis. This study highlights the ongoing need for reducing negative attitudes toward HIV, HBV, and HCV; and providing health education among HCWs, especially focusing on HBV and HCV prevention. The findings of the research project can be used to develop interventions addressing low HBV- and HCV-related knowledge and attitudes.

Relationship between career motivation and perceived spiritual leadership in health professional educators: a correlational study in Iran.

PubMed

Sadeghifar, Jamil; Bahadori, Mohammadkarim; Baldacchino, Donia; Raadabadi, Mehdi; Jafari, Mehdi

2013-12-20

Career motivation in university educators through efficient ways and appropriate with the educational system, is considered one of the important factors affecting education of students and their competence. This study aimed to determine the relationship between career motivation and spiritual leadership among a university of medical sciences in the west, Iran. This descriptive, cross-sectional correlation study was conducted among the university educators of medical sciences in the west, Iran in 2012. All of the educators (N=230) were selected and recruited according to census method. The data were collected by two established self-completed questionnaires on spiritual leadership (SL) and career motivation. Data were analyzed statistically by parametric tests: Pearson correlation, independent student t-test and one-way analysis of variance (ANOVA). The Pearson correlation test identified a significant relationship between educators' career motivation and vision, altruistic love, hope/faith, meaning/calling and membership dimensions of spiritual leadership (p<0.05). The independent t-test detected a significant relationship between the 'hope/faith' (p=0.04) and organizational commitment (p=0.004) dimensions and the gender of educators. ANOVA revealed significant differences in educators' years of work experience and their overall career motivation (p=0.003) and the dimension of 'membership' (p<0.04). A significant relationship was found in 'altruistic love' and 'Hope/faith', and the educators' academic rank place in the university (p=0.03). Also a significant relationship was found in 'vision' (p=0.03) and 'altruistic love' (p=0.002) and 'membership' (p=0.04) dimensions, and the type of faculty. The results indicate that the dimensions of existence of spiritual leadership may have a positive relationship with educators' career motivation.

Longitudinal evaluation of fluoride levels in nails of 18-30-month-old children that were using toothpastes with 500 and 1100 μg F/g.

PubMed

Amaral, Jackeline G; Freire, Isabelle R; Valle-Neto, Eduardo F R; Cunha, Robson F; Martinhon, Cleide C R; Delbem, Alberto C B

2014-10-01

This study aimed to evaluate the fluoride concentration in the fingernails and toenails of children aged 18-30 months during use of fluoride-containing toothpastes supplemented with calcium glycerophosphate (CaGP) or sodium trimetaphosphate (TMP). According to the toothpaste used, children (n = 56) were randomly assigned into three groups: 500 μg F/g with 1% TMP, 500 μg F/g with 0.25% CaGP, and 1100 μg F/g. Fingernails and toenails were collected monthly over a period of 330 days, from the beginning of toothpaste use. Fluoride concentration in the water consumed by the volunteers and fluoride intake from diet and toothpaste were also determined. Fluoride analyses were performed with the electrode after hexamethyldisiloxane-facilitated diffusion or by the direct method, according to the samples. Data passed normality and homoscedasticity tests and were analyzed by 2-way analysis of variance (anova) and 1-way anova followed by Student-Newman-Keuls test (P < 0.05). Fluoride levels in the fingernails and toenails as well as fluoride intake from toothpaste were similar for the groups treated with 500 μg F/g with 1% TMP and 500 μg F/g with 0.25% CaGP toothpastes, but significantly lower than the 1100 μg F/g group (P < 0.05). No significant differences were noted among the groups regarding fluoride intake from diet and that by water consumed by the volunteers (P > 0.05). The results of the longitudinal study suggest that the level of fluoride present in nails was lower with the use of toothpastes with a low fluoride concentration. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Asymmetric training using virtual reality reflection equipment and the enhancement of upper limb function in stroke patients: a randomized controlled trial.

PubMed

Lee, DongJin; Lee, MyungMo; Lee, KyoungJin; Song, ChangHo

2014-07-01

Asymmetric movements with both hands contributed to the improvement of spatially coupled motion. Thus, the aim of this study was to investigate the effects of an asymmetric training program using virtual reality reflection equipment on upper limb function in stroke patients. Twenty-four stroke patients were randomly allocated to an experimental group (n=12) or a control group (n=12). Both groups participated in conventional physical therapy for 2×30 min/d, 5 d/wk, for 4 weeks. The experimental group also participated in an asymmetric training program using virtual reality reflection equipment, and the control group participated in a symmetric training program. Both asymmetric and symmetric programs were conducted for 30 min/d, 5 d/wk, for 4 weeks. To compare upper limb function before and after intervention, the Fugl-Meyer Assessment (FMA), the Box and Block Test (BBT), grip strength, range of motion (ROM), and spasticity were assessed. Both groups showed significant increases in upper limb function, excepting spasticity, after intervention (P<.05, 1-way repeated-measures analysis of variance [ANOVA]). A significant group-time interaction was demonstrated only for shoulder/elbow/wrist items of FMA, BBT, grip strength, and ROM of wrist flexion, extension, and ulnar deviation (P<.05, 2-way repeated-measures ANOVA). This study confirms that the asymmetric training program using virtual reality reflection equipment is an effective intervention method for improving upper limb function in stroke patients. We consider that an additional study based on a program using virtual reflection, which is more functional than performing simple tasks, and consisting of tasks relevant to the activities of daily living be conducted. Copyright © 2014 National Stroke Association. Published by Elsevier Inc. All rights reserved.

Experience of Anti-VEGF Treatment and Clinical Levels of Depression and Anxiety in Patients With Wet Age-Related Macular Degeneration.

PubMed

Senra, Hugo; Balaskas, Konstantinos; Mahmoodi, Neda; Aslam, Tariq

2017-05-01

To investigate detailed patient experiences specific to receiving vascular endothelial growth factor inhibitors (anti-VEGF) for wet age-related macular degeneration (wAMD), and to acquire a snapshot of the frequency of clinically significant levels of depression, anxiety, and posttraumatic stress among patients and levels of burden in patients' carers. Observational cross-sectional mixed-methods study. Three hundred patients with wAMD receiving anti-VEGF treatment and 100 patient carers were recruited. Qualitative data on patients' experience of treatment were collected using a structured survey. Standardized validated questionnaires were used to quantify clinically significant levels of anxiety, depression, and posttraumatic stress, as well as cognitive function and carers' burden. Qualitative data showed that 56% of patients (n = 132) reported anxiety related to anti-VEGF treatment. The main sources of anxiety were fear of going blind owing to intravitreal injections and concerns about treatment effectiveness, rather than around pain. From validated questionnaires, 17% of patients (n = 52) showed clinical levels of anxiety and 12% (n = 36) showed clinical levels of depression. Depression levels, but not anxiety, were significantly higher in patients who received up to 3 injections compared with patients who received from 4 to 12 injections (analysis of variance [ANOVA] P = .027) and compared with patients who received more than 12 injections (ANOVA P = .001). Anti-VEGF treatment is often experienced with some anxiety related to treatment, regardless of the number of injections received. Clinical levels of depression seem to be more frequent in patients at early stages of anti-VEGF treatment. Strategies to improve patient experience of treatment and minimize morbidity are suggested. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

Effects of streptozotocin-induced diabetes on bladder and erectile (dys)function in the same rat in vivo.

PubMed

Christ, George J; Hsieh, Yi; Zhao, Weixin; Schenk, Gregory; Venkateswarlu, Karicheti; Wang, Hong-Zhan; Tar, Moses T; Melman, Arnold

2006-05-01

To establish the methods, feasibility and utility of evaluating the impact of diabetes on bladder and erectile function in the same rat, as more than half of diabetic patients have bladder dysfunction, and half of diabetic men have erectile dysfunction, but the severity of coincident disease has not been rigorously assessed. In all, 16 F-344 rats had diabetes induced by streptozotocin (STZ), and were divided into insulin-treated (five) and untreated (11), and compared with age-matched controls (10), all assessed in parallel. All STZ rats were diabetic for 8-11 weeks. Cystometric studies were conducted on all rats, with cavernosometric studies conducted on a subset of rats. There were insulin-reversible increases in the following cystometric variables; bladder weight, bladder capacity, micturition volume, residual volume, micturition pressure and spontaneous activity (P < 0.05, in all, one-way analysis of variance, anova). Cavernosometry showed a diabetes-related, insulin-reversible decline in the cavernosal nerve-stimulated intracavernosal pressure (ICP) response at all levels of current stimulation (P < 0.05, in all one-way anova). Plotting erectile capacity (i.e. ICP) against bladder capacity showed no correlation between the extent of the decline in erectile capacity and the magnitude of the increase in bladder capacity. These studies extend previous work to indicate that the extent of diabetes-related bladder and erectile dysfunction can vary in the same rat. As such, these findings highlight the importance of evaluating the impact of diabetes on multiple organ systems in the lower urinary tract. Future studies using this model system should lead to a better understanding of the initiation, development, progression and coincidence of these common diabetic complications.

Comparison of the frictional characteristics of aesthetic orthodontic brackets measured using a modified in vitro technique

PubMed Central

Arici, Nursel

2015-01-01

Objective The coefficients of friction (COFs) of aesthetic ceramic and stainless steel brackets used in conjunction with stainless steel archwires were investigated using a modified linear tribometer and special computer software, and the effects of the bracket slot size (0.018 inches [in] or 0.022 in) and materials (ceramic or metal) on the COF were determined. Methods Four types of ceramic (one with a stainless steel slot) and one conventional stainless steel bracket were tested with two types of archwire sizes: a 0.017 × 0.025-in wire in the 0.018-in slots and a 0.019 × 0.025-in wire in the 0.022-in slot brackets. For pairwise comparisons between the 0.018-in and 0.022-in slot sizes in the same bracket, an independent sample t-test was used. One-way and two-way analysis of variance (ANOVA) and Tukey's post-hoc test at the 95% confidence level (α = 0.05) were also used for statistical analyses. Results There were significant differences between the 0.022-in and 0.018-in slot sizes for the same brand of bracket. ANOVA also showed that both slot size and bracket slot material had significant effects on COF values (p < 0.001). The ceramic bracket with a 0.022-in stainless steel slot showed the lowest mean COF (µ = 0.18), followed by the conventional stainless steel bracket with a 0.022-in slot (µ = 0.21). The monocrystalline alumina ceramic bracket with a 0.018-in slot had the highest COF (µ = 0.85). Conclusions Brackets with stainless steel slots exhibit lower COFs than ceramic slot brackets. All brackets show lower COFs as the slot size increases. PMID:25667915

Virtual reality, ultrasound-guided liver biopsy simulator: development and performance discrimination

PubMed Central

Johnson, S J; Hunt, C M; Woolnough, H M; Crawshaw, M; Kilkenny, C; Gould, D A; England, A; Sinha, A; Villard, P F

2012-01-01

Objectives The aim of this article was to identify and prospectively investigate simulated ultrasound-guided targeted liver biopsy performance metrics as differentiators between levels of expertise in interventional radiology. Methods Task analysis produced detailed procedural step documentation allowing identification of critical procedure steps and performance metrics for use in a virtual reality ultrasound-guided targeted liver biopsy procedure. Consultant (n=14; male=11, female=3) and trainee (n=26; male=19, female=7) scores on the performance metrics were compared. Ethical approval was granted by the Liverpool Research Ethics Committee (UK). Independent t-tests and analysis of variance (ANOVA) investigated differences between groups. Results Independent t-tests revealed significant differences between trainees and consultants on three performance metrics: targeting, p=0.018, t=−2.487 (−2.040 to −0.207); probe usage time, p = 0.040, t=2.132 (11.064 to 427.983); mean needle length in beam, p=0.029, t=−2.272 (−0.028 to −0.002). ANOVA reported significant differences across years of experience (0–1, 1–2, 3+ years) on seven performance metrics: no-go area touched, p=0.012; targeting, p=0.025; length of session, p=0.024; probe usage time, p=0.025; total needle distance moved, p=0.038; number of skin contacts, p<0.001; total time in no-go area, p=0.008. More experienced participants consistently received better performance scores on all 19 performance metrics. Conclusion It is possible to measure and monitor performance using simulation, with performance metrics providing feedback on skill level and differentiating levels of expertise. However, a transfer of training study is required. PMID:21304005

Marginal and internal fit of cobalt-chromium copings fabricated using the conventional and the direct metal laser sintering techniques: A comparative in vitro study.

PubMed

Ullattuthodi, Sujana; Cherian, Kandathil Phillip; Anandkumar, R; Nambiar, M Sreedevi

2017-01-01

This in vitro study seeks to evaluate and compare the marginal and internal fit of cobalt-chromium copings fabricated using the conventional and direct metal laser sintering (DMLS) techniques. A master model of a prepared molar tooth was made using cobalt-chromium alloy. Silicone impression of the master model was made and thirty standardized working models were then produced; twenty working models for conventional lost-wax technique and ten working models for DMLS technique. A total of twenty metal copings were fabricated using two different production techniques: conventional lost-wax method and DMLS; ten samples in each group. The conventional and DMLS copings were cemented to the working models using glass ionomer cement. Marginal gap of the copings were measured at predetermined four points. The die with the cemented copings are standardized-sectioned with a heavy duty lathe. Then, each sectioned samples were analyzed for the internal gap between the die and the metal coping using a metallurgical microscope. Digital photographs were taken at ×50 magnification and analyzed using measurement software. Statistical analysis was done by unpaired t -test and analysis of variance (ANOVA). The results of this study reveal that no significant difference was present in the marginal gap of conventional and DMLS copings ( P > 0.05) by means of ANOVA. The mean values of internal gap of DMLS copings were significantly greater than that of conventional copings ( P < 0.05). Within the limitations of this in vitro study, it was concluded that the internal fit of conventional copings was superior to that of the DMLS copings. Marginal fit of the copings fabricated by two different techniques had no significant difference.

The Effect of Different Chemical Surface Treatments of Denture Teeth on Shear Bond Strength: A Comparative Study

PubMed Central

Palekar, Umesh; Awinashe, Vaibav; Mishra, Sunil Kumar; Kawadkar, Abhishek; Rahangdale, Tripti

2014-01-01

Background: The development of better cross linked acrylic resin teeth has solved the problems related to wearing and discoloration of acrylic teeth. The same cross linking at ridge lap region acts as a double edge sword as it weakens the bond between denture base and tooth. Aim of Study: The purpose of study was to evaluate the effect of surface treatment on the bond strength of resin teeth to denture base resin using monomethyl methacrylate monomer and dichloromethane with no surface treatment acting as control. Settings and Design:Denture base cylinder samples in wax (n=180) were made with maxillary central incisor attached at 450 (JIST 6506). These samples were randomly and equally divided into three groups of 60 each. These specimens were then flasked, dewaxed as per the standard protocol. Materials and Methods: Before acrylization, ridge lap area was treated as follows: Group A- no surface treatment act as control, Group B treated with monomethyl methacrylate monomer, Group C treated with dichloromethane. Digitally controlled acryliser was used for acrylization as per manufacturer’s instructions and shear bond strength was tested on Universal Testing Machine (Servo Hydraulic, 50kN High Strain, BISS Research). Statistical Analysis used: Result was statistically analyzed with One-way analysis of variance (ANOVA) and Post-hoc ANOVA Tukey’s HSD test at 5% level of significance. Results: The application of dichloromethane showed increased bond strength between cross linked acrylic resin teeth and heat cure denture base resin followed by monomethyl methacrylate monomer and control group. Conclusion: The application of dichloromethane on the ridge lap surface of the resin teeth before packing of the dough into the mold significantly increased the bond strength between cross linked acrylic resin teeth and heat cure denture base resin. PMID:25121057

Characterization of Italian honeys (Marche Region) on the basis of their mineral content and some typical quality parameters

PubMed Central

Conti, Marcelo Enrique; Stripeikis, Jorge; Campanella, Luigi; Cucina, Domenico; Tudino, Mabel Beatriz

2007-01-01

Background The characterization of three types of Marche (Italy) honeys (Acacia, Multifloral, Honeydew) was carried out on the basis of the their quality parameters (pH, sugar content, humidity) and mineral content (Na, K, Ca, Mg, Cu, Fe, and Mn). Pattern recognition methods such as principal components analysis (PCA) and linear discriminant analysis (LDA) were performed in order to classify honey samples whose botanical origins were different, and identify the most discriminant parameters. Lastly, using ANOVA and correlations for all parameters, significant differences between diverse types of honey were examined. Results Most of the samples' water content showed good maturity (98%) whilst pH values were in the range 3.50 – 4.21 confirming the good quality of the honeys analysed. Potassium was quantitatively the most relevant mineral (mean = 643 ppm), accounting for 79% of the total mineral content. The Ca, Na and Mg contents account for 14, 3 and 3% of the total mineral content respectively, while other minerals (Cu, Mn, Fe) were present at very low levels. PCA explained 75% or more of the variance with the first two PC variables. The variables with higher discrimination power according to the multivariate statistical procedure were Mg and pH. On the other hand, all samples of acacia and honeydew, and more than 90% of samples of multifloral type have been correctly classified using the LDA. ANOVA shows significant differences between diverse floral origins for all variables except sugar, moisture and Fe. Conclusion In general, the analytical results obtained for the Marche honeys indicate the products' high quality. The determination of physicochemical parameters and mineral content in combination with modern statistical techniques can be a useful tool for honey classification. PMID:17880749

The relationship between corn particle size and thermoregulation of laying hens in an equatorial semi-arid environment.

PubMed

de Souza, João Batista Freire; de Morais Oliveira, Vanessa Raquel; de Arruda, Alex Martins Varela; de Melo Silva, Aurora; de Macedo Costa, Leonardo Lelis

2015-01-01

Heat stress is one of the main factors affecting egg production. One way to improve egg production is physical processing of the feed ingredients, allowing for better utilization of nutrients. In this study, the relationship between the corn particle size, measured as the geometric mean diameter (GMD), and thermoregulation was evaluated by determining the effect of the GMD on performance, egg quality, and physiological responses. Feed intake, eggshell quality (weight and thickness), rectal temperature (T R), respiratory rate (R R), and surface temperature (T S) were recorded in sixty 20-week-old naked neck laying hens that were fed corn of different particle sizes. Ambient temperature (T A) was also recorded during the trial. The GMD of corn particles was determined using a screens granulometer, resulting in sizes of 605, 1,030, and 2,280 μm. The analysis of variance (ANOVA) of a completely randomized design showed a significant effect (P < 0.05) of GMD on feed intake, shell weight, and shell thickness. The ANOVA performed by the least squares method showed a highly significant effect (P < 0.01) of GMD on T R and R R. T A, categorized into three classes (24.0-26, 26.1-28.9, and 29.0-31.0 °C), had a significant effect (P < 0.01) on T R and T S. The interaction between the GMD of corn particles and the T A classes was not statistically significant. Coarser corn particles cause an increase in the rectal temperature of naked neck hens, and these birds increase their respiratory rate to dissipate excess metabolic heat. This increase in the respiratory rate causes a decrease in the eggshell quality.

INNOVATIVE INSTRUMENTATION AND ANALYSIS OF THE TEMPERATURE MEASUREMENT FOR HIGH TEMPERATURE GASIFICATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seong W. Lee

2004-10-01

The systematic tests of the gasifier simulator on the clean thermocouple were completed in this reporting period. Within the systematic tests on the clean thermocouple, five (5) factors were considered as the experimental parameters including air flow rate, water flow rate, fine dust particle amount, ammonia addition and high/low frequency device (electric motor). The fractional factorial design method was used in the experiment design with sixteen (16) data sets of readings. Analysis of Variances (ANOVA) was applied to the results from systematic tests. The ANOVA results show that the un-balanced motor vibration frequency did not have the significant impact onmore » the temperature changes in the gasifier simulator. For the fine dust particles testing, the amount of fine dust particles has significant impact to the temperature measurements in the gasifier simulator. The effects of the air and water on the temperature measurements show the same results as reported in the previous report. The ammonia concentration was included as an experimental parameter for the reducing environment in this reporting period. The ammonia concentration does not seem to be a significant factor on the temperature changes. The linear regression analysis was applied to the temperature reading with five (5) factors. The accuracy of the linear regression is relatively low, which is less than 10% accuracy. Nonlinear regression was also conducted to the temperature reading with the same factors. Since the experiments were designed in two (2) levels, the nonlinear regression is not very effective with the dataset (16 readings). An extra central point test was conducted. With the data of the center point testing, the accuracy of the nonlinear regression is much better than the linear regression.« less

Fabrication and evaluation of Bis-GMA/TEGDMA dental resins/composites containing nano fibrillar silicate.

PubMed

Tian, Ming; Gao, Yi; Liu, Yi; Liao, Yiliang; Hedin, Nyle E; Fong, Hao

2008-02-01

To investigate the reinforcement of Bis-GMA/TEGDMA dental resins (without conventional glass filler) and composites (with conventional glass filler) with various mass fractions of nano fibrillar silicate (FS). Three dispersion methods were studied to separate the silanized FS as nano-scaled single crystals and uniformly distribute them into dental matrices. The photo-curing behaviors of the Bis-GMA/TEGDMA/FS resins were monitored in situ by RT-NIR to study the photopolymerization rate and the vinyl double bond conversion. Mechanical properties (flexural strength, elastic modulus and work-of-fracture) of the nano FS reinforced resins/composites were tested, and analysis of variance (ANOVA) was used for the statistical analysis of the acquired data. The morphology of nano FS and the representative fracture surfaces of its reinforced resins/composites were examined by SEM/TEM. Impregnation of small mass fractions (1% and 2.5%) of nano FS into Bis-GMA/TEGDMA (50/50 mass ratio) dental resins/composites improved the mechanical properties substantially. Larger mass fraction of impregnation (7.5%), however, did not further improve the mechanical properties (one way ANOVA, P>0.05) and may even reduce the mechanical properties. The high degree of separation and uniform distribution of nano FS into dental resins/composites was a challenge. Impregnation of nano FS into dental resins/composites could result in two opposite effects: a reinforcing effect due to the highly separated and uniformly distributed nano FS single crystals, or a weakening effect due to the formation of FS agglomerates/particles. Uniform distribution of highly separated nano FS single crystals into dental resins/composites could significantly improve the mechanical properties of the resins/composites.

Timing considerations on the shear bond strength of orthodontic brackets after topical fluoride varnish applications

PubMed Central

Cossellu, Gianguido; Lanteri, Valentina; Butera, Andrea; Laffi, Nicola; Merlini, Alberto; Farronato, Giampietro

2017-01-01

Objectives: To assess the best temporal association between the application of a fluoride varnish on enamel and bonding procedures. Materials and Methods: Eighty mandibular bovine incisors were used. Teeth were divided into 4 groups (20 per group); Groups 1–3 were treated with fluoride varnish (Fluor Protector, Ivoclar Vivadent, Schaan, Liechtenstein), and Group 4 served as control with no pretreatment. Tooth were stored in deionized water (37°C) and subjected to thermal cycling for 400 (Group 1), 800 (Group 2), and 2500 (Group 3) cycles corresponding, respectively, to 15, 30, and 90 days in order to simulate the three different timing of bracket bonding. Shear bond strength (SBS) was measured using an Instron Universal Testing machine. Tooth surfaces were examined under a stereomicroscope at 10× magnification to assess the amount of adhesive remnant index (ARI). One-way analysis of variance (ANOVA) and Tukey's honestly significant difference post-hoc test were used for the comparison of SBS values between groups (P < 0.05). The Chi-square test was used to examine differences among ARI scores. (P < 0.05). Results: One-way ANOVA and Tukey post-hoc test showed that the SBS of different groups were significantly different and was impacted by different timing of bonding (P < 0.05). The main differences were between the control group (17.02 ± 6.38 MPa) and Group 1 (6.93 ± 4.3 MPa). The ARI scores showed that there were no significant differences between the four tested groups. Conclusions: The SBS of the brackets bonded 15 days after the application of the fluoride was set back to an optimal value. PMID:28197397

Evaluation of the effect of aromatherapy with Rosa damascena Mill. on postoperative pain intensity in hospitalized children in selected hospitals affiliated to Isfahan University of Medical Sciences in 2013: A randomized clinical trial

PubMed Central

Marofi, Maryam; Sirousfard, Motahareh; Moeini, Mahin; Ghanadi, Alireza

2015-01-01

Background: Pain is the common complication after a surgery. The aim of this study was to evaluate the effect of aromatherapy with Rosa damascena Mill. on the postoperative pain in children. Materials and Methods: In a double-blind, placebo-controlled clinical trial, we selected 64 children of 3–6 years of age through convenient sampling and divided them randomly into two groups. Patients in group A were given inhalation aromatherapy with R. damascena Mill., and in group B, the patients were given almond oil as a placebo. Inhalation aromatherapy was used at the first time of subjects’ arrival to the ward and then at 3, 6, 9, and 12 h afterward. Common palliative treatments to relieve pain were used in both groups. Thirty minutes after aromatherapy, the postoperative pain in children was evaluated with the Toddler Preschooler Postoperative Pain Scale (TPPPS). Data were statistically analyzed using Chi-square test, one-way analysis of variance (ANOVA), and repeated measures ANOVA. Results: There was no significant difference in pain scores at the first time of subjects’ arrival to the ward (before receiving any aromatherapy or palliative care) between the two groups. After each time of aromatherapy and at the end of treatment, the pain score was significantly reduced in the aromatherapy group with R. damascena Mill. compared to the placebo group. Conclusions: According to our results, aromatherapy with R. damascena Mill. can be used in postoperative pain in children, together with other common treatments without any significant side effects. PMID:25878704

The relationship between corn particle size and thermoregulation of laying hens in an equatorial semi-arid environment

NASA Astrophysics Data System (ADS)

de Souza, João Batista Freire; de Morais Oliveira, Vanessa Raquel; de Arruda, Alex Martins Varela; de Melo Silva, Aurora; de Macedo Costa, Leonardo Lelis

2015-01-01

Heat stress is one of the main factors affecting egg production. One way to improve egg production is physical processing of the feed ingredients, allowing for better utilization of nutrients. In this study, the relationship between the corn particle size, measured as the geometric mean diameter (GMD), and thermoregulation was evaluated by determining the effect of the GMD on performance, egg quality, and physiological responses. Feed intake, eggshell quality (weight and thickness), rectal temperature ( T R), respiratory rate ( R R), and surface temperature ( T S) were recorded in sixty 20-week-old naked neck laying hens that were fed corn of different particle sizes. Ambient temperature ( T A) was also recorded during the trial. The GMD of corn particles was determined using a screens granulometer, resulting in sizes of 605, 1,030, and 2,280 μm. The analysis of variance (ANOVA) of a completely randomized design showed a significant effect ( P < 0.05) of GMD on feed intake, shell weight, and shell thickness. The ANOVA performed by the least squares method showed a highly significant effect ( P < 0.01) of GMD on T R and R R. T A, categorized into three classes (24.0-26, 26.1-28.9, and 29.0-31.0 °C), had a significant effect ( P < 0.01) on T R and T S. The interaction between the GMD of corn particles and the T A classes was not statistically significant. Coarser corn particles cause an increase in the rectal temperature of naked neck hens, and these birds increase their respiratory rate to dissipate excess metabolic heat. This increase in the respiratory rate causes a decrease in the eggshell quality.

Relationship of long-term highly active antiretroviral therapy on salivary flow rate and CD4 Count among HIV-infected patients.

PubMed

Kumar, J Vijay; Baghirath, P Venkat; Naishadham, P Parameswar; Suneetha, Sujai; Suneetha, Lavanya; Sreedevi, P

2015-01-01

To determine if long-term highly active antiretroviral therapy (HAART) therapy alters salivary flow rate and also to compare its relation of CD4 count with unstimulated and stimulated whole saliva. A cross-sectional study was performed on 150 individuals divided into three groups. Group I (50 human immunodeficiency virus (HIV) seropositive patients, but not on HAART therapy), Group II (50 HIV-infected subjects and on HAART for less than 3 years called short-term HAART), Group III (50 HIV-infected subjects and on HAART for more than or equal to 3 years called long-term HAART). Spitting method proposed by Navazesh and Kumar was used for the measurement of unstimulated and stimulated salivary flow rate. Chi-square test and analysis of variance (ANOVA) were used for statistical analysis. The mean CD4 count was 424.78 ± 187.03, 497.82 ± 206.11 and 537.6 ± 264.00 in the respective groups. Majority of the patients in all the groups had a CD4 count between 401 and 600. Both unstimulated and stimulated whole salivary (UWS and SWS) flow rates in Group I was found to be significantly higher than in Group II (P < 0.05). Unstimulated salivary flow rate between Group II and III subjects were also found to be statistically significant (P < 0.05). ANOVA performed between CD4 count and unstimulated and stimulated whole saliva in each group demonstrated a statistically significant relationship in Group II (P < 0.05). There were no significant results found between CD4 count and stimulated whole saliva in each groups. The reduction in CD4 cell counts were significantly associated with salivary flow rates of HIV-infected individuals who are on long-term HAART.

Effect of a Trampoline Exercise on the Anthropometric Measures and Motor Performance of Adolescent Students

PubMed Central

Aalizadeh, Bahman; Mohammadzadeh, Hassan; Khazani, Ali; Dadras, Ali

2016-01-01

Background: Physical exercises can influence some anthropometric and fitness components differently. The aim of present study was to evaluate how a relatively long-term training program in 11-14-year-old male Iranian students affects their anthropometric and motor performance measures. Methods: Measurements were conducted on the anthropometric and fitness components of participants (n = 28) prior to and following the program. They trained 20 weeks, 1.5 h/session with 10 min rest, in 4 times trampoline training programs per week. Motor performance of all participants was assessed using standing long jump and vertical jump based on Eurofit Test Battery. Results: The analysis of variance (ANOVA) repeated measurement test showed a statistically significant main effect of time in calf girth P = 0.001, fat% P = 0.01, vertical jump P = 0.001, and long jump P = 0.001. The ANOVA repeated measurement test revealed a statistically significant main effect of group in fat% P = 0.001. Post hoc paired t-tests indicated statistical significant differences in trampoline group between the two measurements about calf girth (t = −4.35, P = 0.001), fat% (t = 5.87, P = 0.001), vertical jump (t = −5.53, P = 0.001), and long jump (t = −10.00, P = 0.001). Conclusions: We can conclude that 20-week trampoline training with four physical activity sessions/week in 11–14-year-old students seems to have a significant effect on body fat% reduction and effective results in terms of anaerobic physical fitness. Therefore, it is suggested that different training model approach such as trampoline exercises can help students to promote the level of health and motor performance. PMID:27512557

Photocatalytic water splitting over titania supported copper and nickel oxide in photoelectrochemical cell; optimization of photoconversion efficiency

NASA Astrophysics Data System (ADS)

Muti Mohamed, Norani; Bashiri, Robabeh; Kait, Chong Fai; Sufian, Suriati

2018-04-01

we investigated the influence of fluctuating the preparation variables of TiO2 on the efficiency of photocatalytic water splitting in photoelectrochemical (PEC) cell. Hydrothermal associated sol-gel technique was applied to synthesis modified TiO2 with nickel and copper oxide. The variation of water (mL), acid (mL) and total metal loading (%) were mathematically modelled using central composite design (CCD) from the response surface method (RSM) to explore the single and combined effects of parameters on the system performance. The experimental data were fitted using quadratic polynomial regression model from analysis of variance (ANOVA). The coefficient of determination value of 98% confirms the linear relationship between the experimental and predicted values. The amount of water had maximum effect on the photoconversion efficiency due to a direct effect on the crystalline and the number of defects on the surface of photocatalyst. The optimal parameter ratios with maximum photoconversion efficiency were 16 mL, 3 mL and 5 % for water, acid and total metal loading, respectively.

Sample size considerations for clinical research studies in nuclear cardiology.

PubMed

Chiuzan, Cody; West, Erin A; Duong, Jimmy; Cheung, Ken Y K; Einstein, Andrew J

2015-12-01

Sample size calculation is an important element of research design that investigators need to consider in the planning stage of the study. Funding agencies and research review panels request a power analysis, for example, to determine the minimum number of subjects needed for an experiment to be informative. Calculating the right sample size is crucial to gaining accurate information and ensures that research resources are used efficiently and ethically. The simple question "How many subjects do I need?" does not always have a simple answer. Before calculating the sample size requirements, a researcher must address several aspects, such as purpose of the research (descriptive or comparative), type of samples (one or more groups), and data being collected (continuous or categorical). In this article, we describe some of the most frequent methods for calculating the sample size with examples from nuclear cardiology research, including for t tests, analysis of variance (ANOVA), non-parametric tests, correlation, Chi-squared tests, and survival analysis. For the ease of implementation, several examples are also illustrated via user-friendly free statistical software.

Body composition in untreated adult patients with Laron syndrome (primary GH insensitivity).

PubMed

Laron, Zvi; Ginsberg, Shira; Lilos, Pearl; Arbiv, Mira; Vaisman, Nahum

2006-07-01

To quantify body adiposity and its distribution in untreated adult patients with Laron syndrome (LS; primary GH insensitivity) caused by molecular defects of the GH receptor gene or postreceptor pathways and characterized by dwarfism, obesity, insulin resistance and hyperlipidaemia. Eleven LS patients (seven females and four males) aged 28-53 years were studied. Seven healthy males and six healthy females served as controls. Body composition of the total body trunk, upper and lower extremities was determined using dual-energy X-ray absorptiometry (DEXA). Statistical analysis using an analysis of variance (anova) and Mann-Whitney nonparametric methods was performed separately in males and females. Percentage body fat in the LS patients was much higher (P < 0.01) than that in the control population and the female LS patients were significantly more obese (59% total body fat) than the male patients (39% total body fat) (P < 0.002). It was also evident that in these types of patients with markedly increased body fat and decreased muscle and bone mass, body mass index (BMI) does not accurately reflect the body composition. Lifelong congenital IGF-I deficiency leads to extreme adiposity.

Experimental investigation and statistical modeling of temperature rise in rotary ultrasonic bone drilling.

PubMed

Gupta, Vishal; Pandey, Pulak M

2016-11-01

Thermal necrosis is one of the major problems associated with the bone drilling process in orthopedic/trauma surgical operations. To overcome this problem a new bone drilling method has been introduced recently. Studies have been carried out with rotary ultrasonic drilling (RUD) on pig bones using diamond coated abrasive hollow tools. In the present work, influence of process parameters (rotational speed, feed rate, drill diameter and vibrational amplitude) on change in the temperature was studied using design of experiment technique i.e., response surface methodology (RSM) and data analysis was carried out using analysis of variance (ANOVA). Temperature was recorded and measured by using embedded thermocouple technique at a distance of 0.5mm, 1.0mm, 1.5mm and 2.0mm from the drill site. Statistical model was developed to predict the maximum temperature at the drill tool and bone interface. It was observed that temperature increased with increase in the rotational speed, feed rate and drill diameter and decreased with increase in the vibrational amplitude. Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.

Cutting efficiency of four different rotary nickel: Titanium instruments

PubMed Central

Cecchin, Doglas; de Sousa-Neto, Manoel Damião; Pécora, Jesus Djalma; Gariba-Silva, Ricardo

2011-01-01

Aim: The aim of this study was to evaluate the cutting efficiency of rotary nickel-titanium (NiTi) instruments K3, NiTi Tee, Profile, and Quantec with taper size 04/25. Materials and Methods: The number of samples was 10 for each group (n = 10). The cutting efficiency was measured by the mass loss from each acrylic resin block after instrumentation of a simulated canal using the Crown-down technique. Results: The analysis of variance (ANOVA) showed that there was a statistically significant difference among the studied groups. The Tukey's test showed that the acrylic resin blocks prepared with instruments K3 (0.00369 ± 0.00022), NiTi Tee (0.00368 ± 0.00023), and Profile (0.00351 ± 0.00026) presented the greatest mass loss, showing no statistically significant difference among them (P < 0.05). The lowest mass loss was found in the blocks prepared with Quantec instruments (0.00311 ± 0.0003) (P < 0.05). Conclusions: It could be concluded that the K3, NiTi Tee, and Profile instruments presented a greater cutting efficiency than the Quantec instruments. PMID:21814349

Wear of the Primary WaveOne single file when shaping vestibular root canals of first maxillary molar

PubMed Central

Borie, Eduardo; Betancourt, Pablo; Aracena, Angella; Guzmán, Mario

2017-01-01

Background It is very important for a clinician to know the increased wear of mechanized files when establishing endodontic therapy. The aim of this study was to check the wear of the Primary WaveOne file upon shaping two, four and six maxillary molar vestibular canals. Material and Methods The deterioration of 40 files, divided into four groups, was evaluated microscopically: group 1, control (unused); group 2, two canals; group 3, four canals; and group 4, six canals. After instrumentation, the files were embedded in resin and sectioned at their apical third into three equal parts. To analyze the wear of edges in the different sections, AutoCAD software was used and analysis of variance (ANOVA) was then performed to compare the mean rake angles. Results The files with two and four uses showed slight wear, whereas those with six applications showed significant wear (p<0.05). Conclusions Primary WaveOne files can be used in up to four root canals without their edges losing effectiveness. Key words:Files wear, reciprocating motion, shaping capacity, WaveOne. PMID:28298976

Modelling and multi objective optimization of WEDM of commercially Monel super alloy using evolutionary algorithms

NASA Astrophysics Data System (ADS)

Varun, Sajja; Reddy, Kalakada Bhargav Bal; Vardhan Reddy, R. R. Vishnu

2016-09-01

In this research work, development of a multi response optimization technique has been undertaken, using traditional desirability analysis and non-traditional particle swarm optimization techniques (for different customer's priorities) in wire electrical discharge machining (WEDM). Monel 400 has been selected as work material for experimentation. The effect of key process parameters such as pulse on time (TON), pulse off time (TOFF), peak current (IP), wire feed (WF) were on material removal rate (MRR) and surface roughness(SR) in WEDM operation were investigated. Further, the responses such as MRR and SR were modelled empirically through regression analysis. The developed models can be used by the machinists to predict the MRR and SR over a wide range of input parameters. The optimization of multiple responses has been done for satisfying the priorities of multiple users by using Taguchi-desirability function method and particle swarm optimization technique. The analysis of variance (ANOVA) is also applied to investigate the effect of influential parameters. Finally, the confirmation experiments were conducted for the optimal set of machining parameters, and the betterment has been proved.

Optimization of Robotic Spray Painting process Parameters using Taguchi Method

NASA Astrophysics Data System (ADS)

Chidhambara, K. V.; Latha Shankar, B.; Vijaykumar

2018-02-01

Automated spray painting process is gaining interest in industry and research recently due to extensive application of spray painting in automobile industries. Automating spray painting process has advantages of improved quality, productivity, reduced labor, clean environment and particularly cost effectiveness. This study investigates the performance characteristics of an industrial robot Fanuc 250ib for an automated painting process using statistical tool Taguchi’s Design of Experiment technique. The experiment is designed using Taguchi’s L25 orthogonal array by considering three factors and five levels for each factor. The objective of this work is to explore the major control parameters and to optimize the same for the improved quality of the paint coating measured in terms of Dry Film thickness(DFT), which also results in reduced rejection. Further Analysis of Variance (ANOVA) is performed to know the influence of individual factors on DFT. It is observed that shaping air and paint flow are the most influencing parameters. Multiple regression model is formulated for estimating predicted values of DFT. Confirmation test is then conducted and comparison results show that error is within acceptable level.

Quantitative evaluation of palatal bone thickness for the placement of orthodontic miniscrews in adults with different facial types

PubMed Central

Wang, Yunji; Qiu, Ye; Liu, Henglang; He, Jinlong; Fan, Xiaoping

2017-01-01

Objectives: To quantitatively evaluate palatal bone thickness in adults with different facial types using cone beam computed tomography (CBCT). Methods: The CBCT volumetric data of 123 adults (mean age, 26.8 years) collected between August 2014 and August 2016 was retrospectively studied. The subjects were divided into a low-angle group (39 subjects), a normal-angle group (48 subjects) and a high-angle group (36 subjects) based on facial types assigned by cephalometric radiography. The thickness of the palatal bone was assessed at designated points. A repeated-measure analysis of variance (rm-ANOVA) test was used to test the relationship between facial types and palatal bone thickness. Results: Compared to the low-angle group, the high-angle group had significantly thinner palatal bones (p<0.05), except for the anterior-midline, anterior-medial and middle-midline areas. Conclusion: The safest zone for the placement of microimplants is the anterior part of the paramedian palate. Clinicians should pay special attention to the probability of thinner bone plates and the risk of perforation in high-angle patients. PMID:28917071

Comparison of Various Kangaroo Mother Care Carriers on Maternal Comfort: A Pilot Study.

PubMed

Amaliya, Sholihatul; Rustina, Yeni; Agustini, Nur

Kangaroo mother care (KMC) is an evidence-based approach that has been scientifically proven to have a positive effect on mothers and infants. One of the barriers to performing KMC at home is the absence of a special KMC carrier. The most widely used KMC carriers in Indonesia are kangaroo pouch, thari, wrap and traditional wraps in the form of a long strip of fabric. This study's aim was to compare the level of maternal comfort when performing KMC with three different KMC carriers. The study used crossover design involving 20 mothers with low birth weight (LBW) infants as responders, selected through a consecutive sampling method. Data were collected using a maternal comfort questionnaire, maternal anxiety questionnaire, and KMC observation sheet. The results of repeated analysis of variance (ANOVA) showed that there was no significant difference in maternal comfort when performing KMC with any of three KMC carriers (maternal comfort p = .366, α = .05). Therefore, KMC can be implemented using any of the types of carriers including kangaroo pouch, thari wrap, and traditional wrap.

Geophysical data integration and conditional uncertainty analysis on hydraulic conductivity estimation

USGS Publications Warehouse

Rahman, A.; Tsai, F.T.-C.; White, C.D.; Carlson, D.A.; Willson, C.S.

2007-01-01

Integration of various geophysical data is essential to better understand aquifer heterogeneity. However, data integration is challenging because there are different levels of support between primary and secondary data needed to be correlated in various ways. This study proposes a geostatistical method to integrate the hydraulic conductivity measurements and electrical resistivity data to better estimate the hydraulic conductivity (K) distribution. The K measurements are obtained from the pumping tests and represent the primary data (hard data). The borehole electrical resistivity data from electrical logs are regarded as the secondary data (soft data). The electrical resistivity data is used to infer hydraulic conductivity values through the Archie law and Kozeny-Carman equation. A pseudo cross-semivariogram is developed to cope with the resistivity data non-collocation. Uncertainty in the auto-semivariograms and pseudo cross-semivariogram is quantified. The methodology is demonstrated by a real-world case study where the hydraulic conductivity is estimated in the Upper Chicot aquifer of Southwestern Louisiana. The groundwater responses by the cokriging and cosimulation of hydraulic conductivity are compared using analysis of variance (ANOVA). ?? 2007 ASCE.

In vitro wear of new indirect resin composites.

PubMed

Jain, V; Platt, J A; Moore, B K; Borges, G A

2009-01-01

This in vitro study evaluated the toothbrush abrasion wear, three-body Alabama wear and two-body pin-on-disc wear of four commercial indirect resin composites. Enamel shades of Radica (R), Sculpture Plus (S), Belleglass-NG (B) and Gradia Indirect (G) were used. For measuring wear due to toothbrush abrasion, six specimens of each group were fabricated, then brushed in a toothbrush abrasion machine for 20,000 cycles. Material loss was determined by weighing and conversion to volume loss. Three-body wear was measured on six samples for each group using an Alabama-type wear testing machine for 400,000 cycles. Wear depth was measured with a contact profilometer. For two-body wear, five disc specimens were prepared and tested in a two-body wear-testing machine against hydroxypatite sliders for 25,000 cycles. Data were analyzed with one-way analysis of variance (ANOVA) and Tukey test (alpha=0.05). Wear was the highest in Sculpture Plus by all three methods tested and the lowest wear was observed in Belleglass-NG. No statistical difference in wear was noted from Radica.

Assessment of honking impact on traffic noise in urban traffic environment of Nagpur, India.

PubMed

Vijay, Ritesh; Sharma, Asheesh; Chakrabarti, Tapan; Gupta, Rajesh

2015-01-01

In context of increasing traffic noise in urban India, the objective of the research study is to assess noise due to heterogeneous traffic conditions and the impact of honking on it. Traffic volume, noise levels, honking, road geometry and vehicular speed were measured on national highway, major and minor roads in Nagpur, India. Initial study showed lack of correlation between traffic volume and equivalent noise due to some factors, later identified as honking, road geometry and vehicular speed. Further, frequency analysis of traffic noise showed that honking contributed an additional 2 to 5 dB (A) noise, which is quite significant. Vehicular speed was also found to increase traffic noise. Statistical method of analysis of variance (ANOVA) confirms that frequent honking (p < 0.01) and vehicular speed (p < 0.05) have substantial impact on traffic noise apart from traffic volume and type of road. The study suggests that honking must also be a component in traffic noise assessment and to identify and monitor "No Honking" zones in urban agglomerations.

ADL ability characteristics of partially dependent older people: Gender and age differences in ADL ability.

PubMed

Sato, S; Demura, S; Tanaka, K; Kasuga, K; Kobayashi, H

2001-07-01

Age and gender differences in ADL ability were investigated using 568 Japanese partially dependent older people (PD, Mean age=82.2±7.76 years) living in welfare institutions. The subjects were asked about 17 ADL items representing 7 ADL domains by the professional staff working at subjects' institutions. Each item was assessed by a dichotomous scale of "possible" or "impossible". Item proportions of "possible" response were calculated for gender and age groups (60s, 70s, 80s and 90s). Two-way analysis of variance (ANOVA) using the arcsine transformation method indicated no gender differences. Significant decreases in ADL ability with aging were found in 13 of the 17 items. The dependency of ADL in the PD significantly increases with aging, and there is no significant difference in this trend between men and women. The dependency of more difficult activities using lower limb increase from the 70s, and independency of low-difficult activities such as manual activities, feeding and changing posture while lying is maintained until the 80s and over.

Biomechanical and functional variation in rat sciatic nerve following cuff electrode implantation

PubMed Central

2014-01-01

Background Nerve cuff electrodes are commonly and successfully used for stimulating peripheral nerves. On the other hand, they occasionally induce functional and morphological changes following chronic implantation, for reasons not always clear. We hypothesize that restriction of nerve mobility due to cuff implantation may alter nerve conduction. Methods We quantified acute changes in nerve-muscle electrophysiology, using electromyography, and nerve kinematics in anesthetized Sprague Dawley rat sciatic nerves during controlled hindlimb joint movement. We compared electrophysiological and biomechanical response in uncuffed nerves and those secured within a cuff electrode using analysis of variance (ANOVA) and regression analysis. Results Tethering resulting from cuff implantation resulted in altered nerve strain and a complex biomechanical environment during joint movement. Coincident with biomechanical changes, electromyography revealed significantly increased variability in the response of conduction latency and amplitude in cuffed, but not free, nerves following joint movement. Conclusion Our findings emphasize the importance of the mechanical interface between peripheral nerves and their devices on neurophysiological performance. This work has implications for nerve device design, implantation, and prediction of long-term efficacy. PMID:24758405

Machinability Study on Milling Kenaf Fiber Reinforced Plastic Composite Materials using Design of Experiments

NASA Astrophysics Data System (ADS)

Azmi, H.; Haron, C. H. C.; Ghani, J. A.; Suhaily, M.; Yuzairi, A. R.

2018-04-01

The surface roughness (Ra) and delamination factor (Fd) of a milled kenaf reinforced plastic composite materials are depending on the milling parameters (spindle speed, feed rate and depth of cut). Therefore, a study was carried out to investigate the relationship between the milling parameters and their effects on a kenaf reinforced plastic composite materials. The composite panels were fabricated using vacuum assisted resin transfer moulding (VARTM) method. A full factorial design of experiments was use as an initial step to screen the significance of the parameters on the defects using Analysis of Variance (ANOVA). If the curvature of the collected data shows significant, Response Surface Methodology (RSM) is then applied for obtaining a quadratic modelling equation that has more reliable in expressing the optimization. Thus, the objective of this research is obtaining an optimum setting of milling parameters and modelling equations to minimize the surface roughness (Ra) and delamination factor (Fd) of milled kenaf reinforced plastic composite materials. The spindle speed and feed rate contributed the most in affecting the surface roughness and the delamination factor of the kenaf composite materials.

Electrocoagulation efficiency of the tannery effluent treatment using aluminium electrodes.

PubMed

Espinoza-Quiñones, Fernando R; Fornari, Marilda M T; Módenes, Aparecido N; Palácio, Soraya M; Trigueros, Daniela E G; Borba, Fernando H; Kroumov, Alexander D

2009-01-01

An electro-coagulation laboratory scale system using aluminium plates electrodes was studied for the removal of organic and inorganic pollutants as a by-product from leather finishing industrial process. A fractional factorial 2(3) experimental design was applied in order to obtain optimal values of the system state variables. The electro-coagulation (EC) process efficiency was based on the chemical oxygen demand (COD), turbidity, total suspended solid, total fixed solid, total volatile solid, and chemical element concentration values. Analysis of variance (ANOVA) for final pH, total fixed solid (TFS), turbidity and Ca concentration have confirmed the predicted models by the experimental design within a 95% confidence level. The reactor working conditions close to real effluent pH (7.6) and electrolysis time in the range 30-45 min were enough to achieve the cost effective reduction factors of organic and inorganic pollutants' concentrations. An appreciable improvement in COD removal efficiency was obtained for electro-coagulation treatment. Finally, the technical-economical analysis results have clearly shown that the electro-coagulation method is very promising for industrial application.

Breaking good: breaking ties with social groups may be good for recovery from substance misuse.

PubMed

Dingle, Genevieve A; Stark, Claire; Cruwys, Tegan; Best, David

2015-06-01

According to the Social Identity Model of Identity Change, maintaining social identities and support over time is good for health and well-being, particularly during stressful transitions. However, in this study we explore the circumstances under which maintaining social identities - such as 'substance user' - may be harmful to health, and when a successful transition constitutes identity change, rather than maintenance. This prospective study examined social identities of 132 adults entering a drug and alcohol therapeutic community (TC) at admission, three fortnightly intervals and exit, as well as a representative subsample of 60 participants at follow-up. Repeated measures ANOVA results showed that user identity decreased significantly over time, such that 76% of the sample decreased in user identity strength over the first month in the TC. At the same time, recovery identity ratings increased significantly over time, with 64% of the sample staying the same or increasing their recovery identity ratings over the first month. Identity change, indexed by the change in the difference score between user identity and recovery identity over the treatment period, accounted for 34% of the variance in drinking quantity, 41% of the variance in drinking frequency, 5% of the variance in other drug use frequency, and 49% of the variance in life satisfaction at follow-up, after accounting for initial substance abuse severity and social identity ratings at entry to the TC. The findings indicate that moving from a substance using identity towards a recovery identity constitutes an important step in substance abuse treatment. © 2014 The British Psychological Society.

High-functioning autism patients share similar but more severe impairments in verbal theory of mind than schizophrenia patients.

PubMed

Tin, L N W; Lui, S S Y; Ho, K K Y; Hung, K S Y; Wang, Y; Yeung, H K H; Wong, T Y; Lam, S M; Chan, R C K; Cheung, E F C

2018-06-01

Evidence suggests that autism and schizophrenia share similarities in genetic, neuropsychological and behavioural aspects. Although both disorders are associated with theory of mind (ToM) impairments, a few studies have directly compared ToM between autism patients and schizophrenia patients. This study aimed to investigate to what extent high-functioning autism patients and schizophrenia patients share and differ in ToM performance. Thirty high-functioning autism patients, 30 schizophrenia patients and 30 healthy individuals were recruited. Participants were matched in age, gender and estimated intelligence quotient. The verbal-based Faux Pas Task and the visual-based Yoni Task were utilised to examine first- and higher-order, affective and cognitive ToM. The task/item difficulty of two paradigms was examined using mixed model analyses of variance (ANOVAs). Multiple ANOVAs and mixed model ANOVAs were used to examine group differences in ToM. The Faux Pas Task was more difficult than the Yoni Task. High-functioning autism patients showed more severely impaired verbal-based ToM in the Faux Pas Task, but shared similar visual-based ToM impairments in the Yoni Task with schizophrenia patients. The findings that individuals with high-functioning autism shared similar but more severe impairments in verbal ToM than individuals with schizophrenia support the autism-schizophrenia continuum. The finding that verbal-based but not visual-based ToM was more impaired in high-functioning autism patients than schizophrenia patients could be attributable to the varied task/item difficulty between the two paradigms.

Light transmittance of zirconia as a function of thickness and microhardness of resin cements under different thicknesses of zirconia

PubMed Central

Egilmez, Ferhan; Ergun, Gulfem; Kaya, Bekir M.

2013-01-01

Objective: The objective of this study was to compare microhardness of resin cements under different thicknesses of zirconia and the light transmittance of zirconia as a function of thickness. Study design: A total of 126 disc-shaped specimens (2 mm in height and 5 mm in diameter) were prepared from dual-cured resin cements (RelyX Unicem, Panavia F and Clearfil SA cement). Photoactivation was performed by using quartz tungsten halogen and light emitting diode light curing units under different thicknesses of zirconia. Then the specimens (n=7/per group) were stored in dry conditions in total dark at 37°C for 24 h. The Vicker’s hardness test was performed on the resin cement layer with a microhardness tester. Statistical significance was determined using multifactorial analysis of variance (ANOVA) (alpha=.05). Light transmittance of different thicknesses of zirconia (0.3, 0.5 and 0.8 mm) was measured using a hand-held radiometer (Demetron, Kerr). Data were analyzed using one-way ANOVA test (alpha=.05). Results: ANOVA revealed that resin cement and light curing unit had significant effects on microhardness (p < 0.001). Additionally, greater zirconia thickness resulted in lower transmittance. There was no correlation between the amount of light transmitted and microhardness of dual-cured resin cements (r = 0.073, p = 0.295). Conclusion: Although different zirconia thicknesses might result in insufficient light transmission, dual-cured resin cements under zirconia restorations could have adequate microhardness. Key words:Zirconia, microhardness, light transmittance, resin cement. PMID:23385497

The effects of succinylcholine or low-dose rocuronium to aid endotracheal intubation of adult sows

PubMed Central

Duke-Novakovski, Tanya; Ambros, Barbara; Auckland, Crissie D.; Harding, John C.S.

2012-01-01

This randomized, prospective, blinded study compared the use of succinylcholine or rocuronium to aid endotracheal intubation of 27 adult sows [mean body weight 261 ± 28 (standard deviation) kg]. Preliminary trials allowed development of the intubation technique and skills. The sows were premedicated with azaperone, atropine, and morphine, and anesthesia was induced with thiopental [6 mg/kg body weight (BW)]. Nine sows each received succinylcholine (1.0 mg/kg BW), rocuronium (0.5 mg/kg BW), or saline (15 mL) after induction. Increments of thiopental (1 mg/kg BW) were used if swallowing impaired intubation. Intubation was performed 45 s after injection of the test drug and was timed and scored. The intubation scores were analyzed with Kruskal-Wallis analysis of variance (ANOVA). Time taken for intubation, body weight, and total dose of thiopental were analyzed with ANOVA and Bonferroni’s multiple-comparisons test. No significant differences (at P < 0.05) were found between the groups with regard to intubation score, time taken for intubation, or total thiopental dose. Thus, neuromuscular blocking agents did not aid endotracheal intubation of adult sows anesthetized with thiopental. PMID:22754096

Evaluating the efficacy of a chemistry video game

NASA Astrophysics Data System (ADS)

Shapiro, Marina

A quasi-experimental design pre-test/post-test intervention study utilizing a within group analysis was conducted with 45 undergraduate college chemistry students that investigated the effect of implementing a game-based learning environment into an undergraduate college chemistry course in order to learn if serious educational games (SEGs) can be used to achieve knowledge gains of complex chemistry concepts and to achieve increase in students' positive attitude toward chemistry. To evaluate if students learn chemistry concepts by participating in a chemistry game-based learning environment, a one-way repeated measures analysis of variance (ANOVA) was conducted across three time points (pre-test, post-test, delayed post-test which were chemistry content exams). Results showed that there was an increase in exam scores over time. The results of the ANOVA indicated a statistically significant time effect. To evaluate if students' attitude towards chemistry increased as a result of participating in a chemistry game-based learning environment a paired samples t-test was conducted using a chemistry attitudinal survey by Mahdi (2014) as the pre- and post-test. Results of the paired-samples t-test indicated that there was no significant difference in pre-attitudinal scores and post-attitudinal scores.

Synthesis, structure characterization and catalytic activity of nickel tungstate nanoparticles

NASA Astrophysics Data System (ADS)

Pourmortazavi, Seied Mahdi; Rahimi-Nasrabadi, Mehdi; Khalilian-Shalamzari, Morteza; Zahedi, Mir Mahdi; Hajimirsadeghi, Seiedeh Somayyeh; Omrani, Ismail

2012-12-01

Taguchi robust design was applied to optimize experimental parameters for controllable, simple and fast synthesis of nickel tungstate nanoparticles. NiWO4 nanoparticles were synthesized by precipitation reaction involving addition of nickel ion solution to the tungstate aqueous reagent and then formation of nickel tungstate nucleolus which are insoluble in aqueous media. Effects of various parameters such as nickel and tungstate concentrations, flow rate of reagent addition and reactor temperature on diameter of synthesized nickel tungstate nanoparticles were investigated experimentally by the aid of orthogonal array design. The results for analysis of variance (ANOVA) showed that particle size of nickel tungstate can be effectively tuned by controlling significant variables involving nickel and tungstate concentrations and flow rate; while, temperature of the reactor has a no considerable effect on the size of NiWO4 particles. The ANOVA results proposed the optimum conditions for synthesis of nickel tungstate nanoparticles via this technique. Also, under optimum condition nanoparticles of NiWO4 were prepared and their structure and chemical composition were characterized by means of EDAX, XRD, SEM, FT-IR spectroscopy, UV-vis spectroscopy, and photoluminescence. Finally, catalytic activity of the nanoparticles in a cycloaddition reaction was examined.

Detection of burst suppression patterns in EEG using recurrence rate.

PubMed

Liang, Zhenhu; Wang, Yinghua; Ren, Yongshao; Li, Duan; Voss, Logan; Sleigh, Jamie; Li, Xiaoli

2014-01-01

Burst suppression is a unique electroencephalogram (EEG) pattern commonly seen in cases of severely reduced brain activity such as overdose of general anesthesia. It is important to detect burst suppression reliably during the administration of anesthetic or sedative agents, especially for cerebral-protective treatments in various neurosurgical diseases. This study investigates recurrent plot (RP) analysis for the detection of the burst suppression pattern (BSP) in EEG. The RP analysis is applied to EEG data containing BSPs collected from 14 patients. Firstly we obtain the best selection of parameters for RP analysis. Then, the recurrence rate (RR), determinism (DET), and entropy (ENTR) are calculated. Then RR was selected as the best BSP index one-way analysis of variance (ANOVA) and multiple comparison tests. Finally, the performance of RR analysis is compared with spectral analysis, bispectral analysis, approximate entropy, and the nonlinear energy operator (NLEO). ANOVA and multiple comparison tests showed that the RR could detect BSP and that it was superior to other measures with the highest sensitivity of suppression detection (96.49%, P = 0.03). Tracking BSP patterns is essential for clinical monitoring in critically ill and anesthetized patients. The purposed RR may provide an effective burst suppression detector for developing new patient monitoring systems.

Beverage consumption in low income, "milk-friendly" families.

PubMed

Glanville, N Theresa; McIntyre, Lynn

2009-01-01

Beverage consumption by poor, lone mother-led, "milk-friendly" families living in Atlantic Canada was characterized over a one-month income cycle. Beverage intake and food security status were assessed weekly, using a 24-hour dietary recall and the Cornell-Radimer food insecurity questionnaire. Families were classified as "milk friendly" if total consumption of milk was 720 mL on a single day during the month. Beverage intake was assessed using t-tests, analysis of variance (ANOVA), repeated measures ANOVA with post hoc comparisons, and chi-square analysis. Milk consumption by milk-friendly families (76; total sample, 129) was highest at the time of the month when they had the most money to spend. During all time intervals, mothers consumed the least amount of milk and children aged one to three years consumed the most. Mothers consumed carbonated beverages disproportionately, while children of all ages consumed more fruit juice/drink. Mothers' coffee consumption was profoundly increased when either they or their children were hungry. The quality of beverage intake by members of low-income households fluctuates in accordance with financial resources available to purchase foods. Mothers' beverage intake is compromised by the degree of food insecurity the family experiences.

The effect of country wealth on incidence of breast cancer.

PubMed

Coccia, Mario

2013-09-01

The aim of this study is to analyze the relationship between the incidence of breast cancer and income per capita across countries. Data on breast cancer incidence in 52 countries were obtained from GLOBOCAN, along with economic indicators of gross domestic product per capita from the World Bank. Number of computed tomography scanners and magnetic resonance imaging (from World Health Organization) were used as a surrogate for technology and access to screening for cancer diagnosis. Statistical analyses for correlation and regression were performed, along with an analysis of variance (ANOVA). A strong positive association between breast cancer incidence and gross domestic product per capita, Pearson's r = 65.4 %, controlling latitude, density of computed tomography scanners and magnetic resonance imaging was found in countries of temperate zones. The estimated relationship suggests that 1 % higher gross domestic product per capita, within the temperate zones (latitudes), increases the expected age-standardized breast cancer incidence by about 35.6 % (p < 0.001). ANOVA confirms these vital results. While some have argued that latitude and seasonality may affect breast cancer incidence, these findings suggest that wealthier nations may have a higher incidence of breast cancer independent of geographic location and screening technology.

Comparison of the Effect of Toothbrushing Education Via Video, Lecture and Pamphlet on the Dental Plaque Index of 12-Year-Old Children.

PubMed

Ramezaninia, Javad; Naghibi Sistani, Mohammad Mehdi; Ahangari, Zohreh; Gholinia, Hemmat; Jahanian, Iman; Gharekhani, Samaneh

2018-04-11

The aim of this study was to compare the effect of different modes of toothbrushing education (lecture, video and pamphlet) on the dental plaque index (PI) of adolescents. The cluster randomized intervention was performed on 128 participants aged 12 years, who were allocated into four groups based on the type of intervention. Group 1: no intervention; and groups 2, 3, 4: education via lecture, video, and pamphlet, respectively (n = 32). Their plaque index was measured at the baseline, 24 h and two months later. Data were analyzed by repeated measures analysis of variance (ANOVA), one-way ANOVA, independent and paired t-test. The plaque indices of groups 2, 3, 4 at 24 h (p values < 0.001) and two months (p values < 0.001) showed a significant reduction when compared to the baseline. The lowest PI score was observed in the pamphlet, video and lecture groups at 24 h, respectively. After 2 months, the lowest score of PI was measured in lecture, video and pamphlet groups, respectively; however, these differences were non-significant. Therefore, toothbrushing education via lecture, video and pamphlet reduced the dental plaque index with the same effectiveness.

Masticatory and cervical muscle tenderness and pain sensitivity in a remote area in subjects with a temporomandibular disorder and neck disability.

PubMed

Silveira, Anelise; Armijo-Olivo, Susan; Gadotti, Inae C; Magee, David

2014-01-01

To compare the masticatory and cervical muscle tenderness and pain sensitivity in the hand (remote region) between patients with temporomandibular disorders (TMD) and healthy controls. Twenty female subjects were diagnosed with chronic TMD, and 20 were considered healthy. Subjects completed the Neck Disability Index and Limitations of Daily Functions in a TMD questionnaire. Tenderness of the masticatory and cervical muscles and pain sensitivity in the hand were measured using an algometer. Three-way mixed analysis of variance (ANOVA) evaluated differences in muscle tenderness between groups. One-way ANOVA compared pain sensitivity in the hand between groups. Effect sizes were assessed using Cohen guidelines. Significantly increased masticatory and cervical muscle tenderness and pain sensitivity in the hand were found in subjects with TMD when compared with healthy subjects. Moderate to high effect sizes showed the clinical relevance of the findings. The results of this study have highlighted the importance of assessing TMD patients not only in the craniofacial region but also in the neck and other parts of the body. Future studies should focus on testing the effectiveness of treatments addressing the neck and the pain sensitivity in the hand in patients with TMD.

Enhanced mannan-derived fermentable sugars of palm kernel cake by mannanase-catalyzed hydrolysis for production of biobutanol.

PubMed

Shukor, Hafiza; Abdeshahian, Peyman; Al-Shorgani, Najeeb Kaid Nasser; Hamid, Aidil Abdul; Rahman, Norliza A; Kalil, Mohd Sahaid

2016-10-01

Catalytic depolymerization of mannan composition of palm kernel cake (PKC) by mannanase was optimized to enhance the release of mannan-derived monomeric sugars for further application in acetone-butanol-ethanol (ABE) fermentation. Efficiency of enzymatic hydrolysis of PKC was studied by evaluating effects of PKC concentration, mannanase loading, hydrolysis pH value, reaction temperature and hydrolysis time on production of fermentable sugars using one-way analysis of variance (ANOVA). The ANOVA results revealed that all factors studied had highly significant effects on total sugar liberated (P<0.01). The optimum conditions for PKC hydrolysis were 20% (w/v) PKC concentration, 5% (w/w) mannanase loading, hydrolysis pH 4.5, 45°C temperature and 72h hydrolysis time. Enzymatic experiments in optimum conditions revealed total fermentable sugars of 71.54±2.54g/L were produced including 67.47±2.51g/L mannose and 2.94±0.03g/L glucose. ABE fermentation of sugar hydrolysate by Clostridium saccharoperbutylacetonicum N1-4 resulted in 3.27±1.003g/L biobutanol. Copyright © 2016 Elsevier Ltd. All rights reserved.

Validating internal controls for quantitative plant gene expression studies.

PubMed

Brunner, Amy M; Yakovlev, Igor A; Strauss, Steven H

2004-08-18

Real-time reverse transcription PCR (RT-PCR) has greatly improved the ease and sensitivity of quantitative gene expression studies. However, accurate measurement of gene expression with this method relies on the choice of a valid reference for data normalization. Studies rarely verify that gene expression levels for reference genes are adequately consistent among the samples used, nor compare alternative genes to assess which are most reliable for the experimental conditions analyzed. Using real-time RT-PCR to study the expression of 10 poplar (genus Populus) housekeeping genes, we demonstrate a simple method for determining the degree of stability of gene expression over a set of experimental conditions. Based on a traditional method for analyzing the stability of varieties in plant breeding, it defines measures of gene expression stability from analysis of variance (ANOVA) and linear regression. We found that the potential internal control genes differed widely in their expression stability over the different tissues, developmental stages and environmental conditions studied. Our results support that quantitative comparisons of candidate reference genes are an important part of real-time RT-PCR studies that seek to precisely evaluate variation in gene expression. The method we demonstrated facilitates statistical and graphical evaluation of gene expression stability. Selection of the best reference gene for a given set of experimental conditions should enable detection of biologically significant changes in gene expression that are too small to be revealed by less precise methods, or when highly variable reference genes are unknowingly used in real-time RT-PCR experiments.

Chromatographic determination of itopride hydrochloride in the presence of its degradation products.

PubMed

Kaul, Neeraj; Agrawal, Himani; Maske, Pravin; Rao, Janhavi Ramchandra; Mahadik, Kakasaheb Ramoo; Kadam, Shivajirao S

2005-08-01

Two sensitive and reproducible methods are described for the quantitative determination of itopride hydrochloride (IH) in the presence of its degradation products. The first method is based on HPLC separation on a reversed phase Kromasil column [C18 (5-microm, 25 cm x 4.6 mm, ID)] at ambient temperature using a mobile phase consisting of methanol and water (70:30, v/v) adjusted to pH 4.0 with orthophosphoric acid with UV detection at 258 nm. The flow rate was 1.0 mL per min with an average operating pressure of 180 kg/cm2. The second method is based on HPTLC separation on silica gel 60 F254 using toluene:methanol:chloroform:10% ammonia (5.0:3.0:6.0:0.1, v/v/v/v) as mobile phase at 270 nm. The analysis of variance (ANOVA) and Student's t-test were applied to correlate the results of IH determination in dosage form by means of HPLC and HPTLC methods. The drug was subjected to acid and alkali hydrolysis, oxidation, dry heat, wet heat treatment, UV, and photodegradation. The proposed HPLC method was utilized to investigate the kinetics of the acidic, alkaline, and oxidative degradation processes at different temperatures and the apparent pseudo-first-order rate constant, half-life, and activation energy were calculated. In addition the pH-rate profile of degradation of IH in constant ionic strength buffer solutions in the pH range 2-11 was studied.

Statistical study of EBR-II fuel elements manufactured by the cold line at Argonne-West and by Atomics International

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harkness, A. L.

1977-09-01

Nine elements from each batch of fuel elements manufactured for the EBR-II reactor have been analyzed for /sup 235/U content by NDA methods. These values, together with those of the manufacturer, are used to estimate the product variance and the variances of the two measuring methods. These variances are compared with the variances computed from the stipulations of the contract. A method is derived for resolving the several variances into their within-batch and between-batch components. Some of these variance components have also been estimated by independent and more familiar conventional methods for comparison.

Sources of variance in BC mass measurements from a small marine engine: Influence of the instruments, fuels and loads

NASA Astrophysics Data System (ADS)

Jiang, Yu; Yang, Jiacheng; Gagné, Stéphanie; Chan, Tak W.; Thomson, Kevin; Fofie, Emmanuel; Cary, Robert A.; Rutherford, Dan; Comer, Bryan; Swanson, Jacob; Lin, Yue; Van Rooy, Paul; Asa-Awuku, Akua; Jung, Heejung; Barsanti, Kelley; Karavalakis, Georgios; Cocker, David; Durbin, Thomas D.; Miller, J. Wayne; Johnson, Kent C.

2018-06-01

Knowledge of black carbon (BC) emission factors from ships is important from human health and environmental perspectives. A study of instruments measuring BC and fuels typically used in marine operation was carried out on a small marine engine. Six analytical methods measured the BC emissions in the exhaust of the marine engine operated at two load points (25% and 75%) while burning one of three fuels: a distillate marine (DMA), a low sulfur, residual marine (RMB-30) and a high-sulfur residual marine (RMG-380). The average emission factors with all instruments increased from 0.08 to 1.88 gBC/kg fuel in going from 25 to 75% load. An analysis of variance (ANOVA) tested BC emissions against instrument, load, and combined fuel properties and showed that both engine load and fuels had a statistically significant impact on BC emission factors. While BC emissions were impacted by the fuels used, none of the fuel properties investigated (sulfur content, viscosity, carbon residue and CCAI) was a primary driver for BC emissions. Of the two residual fuels, RMB-30 with the lower sulfur content, lower viscosity and lower residual carbon, had the highest BC emission factors. BC emission factors determined with the different instruments showed a good correlation with the PAS values with correlation coefficients R2 >0.95. A key finding of this research is the relative BC measured values were mostly independent of load and fuel, except for some instruments in certain fuel and load combinations.

Parametric study and global sensitivity analysis for co-pyrolysis of rape straw and waste tire via variance-based decomposition.

PubMed

Xu, Li; Jiang, Yong; Qiu, Rong

2018-01-01

In present study, co-pyrolysis behavior of rape straw, waste tire and their various blends were investigated. TG-FTIR indicated that co-pyrolysis was characterized by a four-step reaction, and H 2 O, CH, OH, CO 2 and CO groups were the main products evolved during the process. Additionally, using BBD-based experimental results, best-fit multiple regression models with high R 2 -pred values (94.10% for mass loss and 95.37% for reaction heat), which correlated explanatory variables with the responses, were presented. The derived models were analyzed by ANOVA at 95% confidence interval, F-test, lack-of-fit test and residues normal probability plots implied the models described well the experimental data. Finally, the model uncertainties as well as the interactive effect of these parameters were studied, the total-, first- and second-order sensitivity indices of operating factors were proposed using Sobol' variance decomposition. To the authors' knowledge, this is the first time global parameter sensitivity analysis has been performed in (co-)pyrolysis literature. Copyright © 2017 Elsevier Ltd. All rights reserved.

Spotting and validation of a genome wide oligonucleotide chip with duplicate measurement of each gene

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomassen, Mads; Skov, Vibe; Eiriksdottir, Freyja

2006-06-16

The quality of DNA microarray based gene expression data relies on the reproducibility of several steps in a microarray experiment. We have developed a spotted genome wide microarray chip with oligonucleotides printed in duplicate in order to minimise undesirable biases, thereby optimising detection of true differential expression. The validation study design consisted of an assessment of the microarray chip performance using the MessageAmp and FairPlay labelling kits. Intraclass correlation coefficient (ICC) was used to demonstrate that MessageAmp was significantly more reproducible than FairPlay. Further examinations with MessageAmp revealed the applicability of the system. The linear range of the chips wasmore » three orders of magnitude, the precision was high, as 95% of measurements deviated less than 1.24-fold from the expected value, and the coefficient of variation for relative expression was 13.6%. Relative quantitation was more reproducible than absolute quantitation and substantial reduction of variance was attained with duplicate spotting. An analysis of variance (ANOVA) demonstrated no significant day-to-day variation.« less

Assessment of spatial variability of major-ion concentrations and del oxygen-18 values in surface snow, Upper Fremont Glacier, Wyoming, USA

USGS Publications Warehouse

Naftz, D.L.; Schuster, P.F.; Reddy, M.M.

1994-01-01

One hundred samples were collected from the surface of the Upper Fremont Glacier at equally spaced intervals defined by an 8100m2 snow grid to asesss the significance of lateral variability in major-ion concentrations and del oxygen-18 values. Comparison of the observed variability of each chemical constituent to the variability expected by measurement error indicated substantial lateral variability with the surface-snow layer. Results of the nested ANOVA indicate most of the variance for every constituent is in the values grouped at the two smaller geographic scales (between 506m2 and within 506m2 sections). The variance data from the snow grid were used to develop equations to evaluate the significance of both positive and negative concentration/value peaks of nitrate and del oxygen-18 with depth, in a 160m ice core. Values of del oxygen-18 in the section from 110-150m below the surface consistently vary outside the expected limits and possibly represents cooler temperatures during the Little Ice Age from about 1810 to 1725 A.D. -from Authors

Study of long term structural and functional changes in medically controlled glaucoma

PubMed Central

Pandey, Achyut N; Sujata, S

2014-01-01

AIM Prospectively analyze the long term structural and functional changes in patients of primary open angle glaucoma (POAG) receiving medical therapy (beta blockers and non beta blockers). In this study an attempt has been made to evaluate whether medical reduction of IOP prevents or delays the progression of glaucomatous visual field loss and/or optic nerve damage in patients with open angle glaucoma. METHODS Study conducted over a period of 27 months, at a tertiary eye care hospital including both eyes of 40 patients with POAG. Group 1 (20 patients, 40 eyes) received beta-blockers, and Group 2 (20 patients, 40 eyes) received non-beta-blockers. Each patient underwent intraocular pressure measurement, best corrected visual acuity, slit-lamp, fundus examination, gonioscopy, central corneal thickness, visual field assessment by Humphrey automated perimetry and retinal nerve fibre layer thickness by Stratus optical coherence tomography at baseline and at two subsequent visits. The average time interval between each visit was 10-11 months. The statistical analysis was done using one-way analysis of variance (ANOVA). Post-hoc test, using tukey' method were adopted. Probablity (P) value of 0.05 or less was considered to be statistically significant. RESULTS A total of 80 eyes of 40 patients of POAG were enrolled, 24 males, 16 females, age group 50-80 years. In both beta and non beta blocker group, reduction (improvement) in mean IOP from initial levels to the levels achieved at the 2nd and 3rd visits was statistically significant. One way ANOVA (df=2), fisher f value=11.64, P=0.000, one way ANOVA (df=3), fisher f value=35.61, P=0.000. Both mean deviation (MD) and pattern standard deviation (PSD) in both beta and non beta blockers at different visits were not statistically significant. Retinal nerve fibre layer thickness (RNFL) -only mean inferior retinal nerve fibre layer, the difference between the mean value in beta and non beta blocker groupwere statistically significant. [unpaired t test value (df=78) =2.27, P=0.03]. Side effects with beta blocker were conjunctival hyperemia (10%), burning (5%), and conjunctival hyperemia (5%) in non beta blockers. CONCLUSION Non-beta-blockers are as effective as beta-blockers in bringing about a significant lowering of intraocular pressure to the normal range, and in preventing progressive damage to the visual fields and retinal nerve fibre layer. The absence of systemic side effects and superior IOP lowering efficacy has made non beta-blockers attractive for first line therapy for the treatment of glaucoma worldwide. PMID:24634878

Comparison of Student Achievement Using Didactic, Inquiry-Based, and the Combination of Two Approaches of Science Instruction

NASA Astrophysics Data System (ADS)

Foster, Hyacinth Carmen

Science educators and administrators support the idea that inquiry-based and didactic-based instructional strategies have varying effects on students' acquisition of science concepts. The research problem addressed whether incorporating the two approaches covered the learning requirements of all students in science classes, enabling them to meet state and national standards. The purpose of this quasiexperimental, posttest design research study was to determine if student learning and achievement in high school biology classes differed for each type of instructional method. Constructivism theory suggested that each learner creates knowledge over time because of the learners' interactions with the environment. The optimal teaching method, didactic (teacher-directed), inquiry-based, or a combination of two approaches instructional method, becomes essential if students are to discover ways to learn information. The research question examined which form of instruction had a significant effect on student achievement in biology. The data analysis consisted of single-factor, independent-measures analysis of variance (ANOVA) that tested the hypotheses of the research study. Locally, the results indicated greater and statistically significant differences in standardized laboratory scores for students who were taught using the combination of two approaches. Based on these results, biology instructors will gain new insights into ways of improving the instructional process. Social change may occur as the science curriculum leadership applies the combination of two instructional approaches to improve acquisition of science concepts by biology students.

The Effects of Kangaroo Mother Care and Swaddling on Venipuncture Pain in Premature Neonates: A Randomized Clinical Trial.

PubMed

Dezhdar, Shahin; Jahanpour, Faezeh; Firouz Bakht, Saeedeh; Ostovar, Afshin

2016-04-01

Hospitalized premature babies often undergo various painful procedures. Kangaroo mother care (KMC) and swaddling are two pain reduction methods. This study was undertaken to compare the effects of swaddling and KMC on pain during venous sampling in premature neonates. This study was performed as a randomized clinical trial on 90 premature neonates. The neonates were divided into three groups using a random allocation block. The three groups were group A (swaddling), group B (KMC), and group C (control). In all three groups, the heart rate and arterial oxygen saturation were measured and recorded in time intervals of 30 seconds before, during, and 30, 60, 90, and 120 seconds after blood sampling. The neonate's face was video recorded and assessed using the premature infant pain profile (PIPP) at time intervals of 30 seconds. The data was analyzed using the t-test, chi-square test, Repeated Measure analysis of variance (ANOVA), Kruskal-Wallis, Post-hoc, and Bonferroni test. The findings revealed that pain was reduced to a great extent in the swaddling and KMC methods compared to the control group. However, there was no significant difference between KMC and swaddling (P ≥ 0.05). The results of this study indicate that there is no meaningful difference between swaddling and KMC on physiological indexes and pain in neonates. Therefore, the swaddling method may be a good substitute for KMC.

The relationship investigation between factors affecting demand for broadband and the level of satisfaction among broadband customers in the South East Coast of Sabah, Malaysia

NASA Astrophysics Data System (ADS)

Hashim, S. H. A.; Hamid, F. A.; Kiram, J. J.; Sulaiman, J.

2017-09-01

This paper aims to investigate the relationship between factors that affecting the demand for broadband and the level of satisfaction. Previous researchers have found that the adoption of broadband is greatly influenced by many factors. Thus, in this study, a self-administered questionnaire was developed to obtain the factors affecting demand for broadband among broadband customers as well as their level of satisfaction. Pearson correlation, one-way analysis of variance (ANOVA) and t-test were used for statistical interpretation of the relationship. This study shows that there are better relationships between several factors over demand for broadband and satisfaction level.

Subtle Increases in BMI within a Healthy Weight Range Still Reduce Womens Employment Chances in the Service Sector.

PubMed

Nickson, Dennis; Timming, Andrew R; Re, Daniel; Perrett, David I

2016-01-01

Using mixed design analysis of variance (ANOVA), this paper investigates the effects of a subtle simulated increase in adiposity on women's employment chances in the service sector. Employing a unique simulation of altering individuals' BMIs and the literature on "aesthetic labour", the study suggests that, especially for women, being heavier, but still within a healthy BMI, deleteriously impacts on hireability ratings. The paper explores the gendered dimension of this prejudice by asking whether female employees at the upper end of a healthy BMI range are likely to be viewed more negatively than their overtly overweight male counterparts. The paper concludes by considering the implications of these findings.

Optimization of Injection Molding Parameters for HDPE/TiO2 Nanocomposites Fabrication with Multiple Performance Characteristics Using the Taguchi Method and Grey Relational Analysis

PubMed Central

Pervez, Hifsa; Mozumder, Mohammad S.; Mourad, Abdel-Hamid I.

2016-01-01

The current study presents an investigation on the optimization of injection molding parameters of HDPE/TiO2 nanocomposites using grey relational analysis with the Taguchi method. Four control factors, including filler concentration (i.e., TiO2), barrel temperature, residence time and holding time, were chosen at three different levels of each. Mechanical properties, such as yield strength, Young’s modulus and elongation, were selected as the performance targets. Nine experimental runs were carried out based on the Taguchi L9 orthogonal array, and the data were processed according to the grey relational steps. The optimal process parameters were found based on the average responses of the grey relational grades, and the ideal operating conditions were found to be a filler concentration of 5 wt % TiO2, a barrel temperature of 225 °C, a residence time of 30 min and a holding time of 20 s. Moreover, analysis of variance (ANOVA) has also been applied to identify the most significant factor, and the percentage of TiO2 nanoparticles was found to have the most significant effect on the properties of the HDPE/TiO2 nanocomposites fabricated through the injection molding process. PMID:28773830

Serum HSP70

PubMed Central

Dutta, Sudhir K.; Girotra, Mohit; Singla, Montish; Dutta, Anand; Stephen, F. Otis; Nair, Padmanabhan P.; Merchant, Nipun B.

2014-01-01

Objectives Heat shock protein 70 (HSP70) is overexpressed in human pancreatic cancer cell lines. To determine if serum HSP70 levels are elevated in patients with pancreatic cancer and can function as a biomarker for early detection of pancreatic cancer. Methods Study subjects were divided into 3 groups: histologically proven pancreatic cancer (PC; n = 23), chronic pancreatitis (CP; n = 12), and matched normal control subjects (C; n = 10). Serum HSP70 levels were determined using a novel immunoelectrophoresis method developed and validated by the authors. Significance of difference between the groups was analyzed with analysis of variance (ANOVA). Receiver operating characteristic (ROC) curve analysis was performed to discriminate patients with pancreatic cancer from normal controls. Results The mean ± SE serum HSP70 levels in the PC, CP, and C groups were 1.68 ± 0.083 ng/mL, 0.40 ± 0.057 ng/mL, and 0.04 ng/mL, respectively. Serum HSP70 levels in the PC group were significantly higher compared with either the CP or C groups (P < 0.01). The sensitivity and specificity of elevated serum HSP70 in the PC group was 74% and 90%, respectively. Conclusions Serum HSP70 levels are significantly increased in patients with pancreatic cancer and may be useful as an additional biomarker for the detection of pancreatic cancer. PMID:22158074

A facile and selective approach for enrichment of l-cysteine in human plasma sample based on zinc organic polymer: Optimization by response surface methodology.

PubMed

Bahrani, Sonia; Ghaedi, Mehrorang; Ostovan, Abbas; Javadian, Hamedreza; Mansoorkhani, Mohammad Javad Khoshnood; Taghipour, Tahere

2018-02-05

In this research, a facile and selective method was described to extract l-cysteine (l-Cys), an essential α-amino acid for anti-ageing playing an important role in human health, from human blood plasma sample. The importance of this research was the mild and time-consuming synthesis of zinc organic polymer (Zn-MOP) as an adsorbent and evaluation of its ability for efficient enrichment of l-Cys by ultrasound-assisted dispersive micro solid-phase extraction (UA-DMSPE) method. The structure of Zn-MOP was investigated by FT-IR, XRD and SEM. Analysis of variance (ANOVA) was applied for the experimental data to reach the best optimum conditions. The quantification of l-Cys was carried out by high performance liquid chromatography with UV detection set at λ=230nm. The calibration graph showed reasonable linear responses towards l-Cys concentrations in the range of 4.0-1000μg/L (r 2 =0.999) with low limit of detection (0.76μg/L, S/N=3) and RSD≤2.18 (n=3). The results revealed the applicability and high performance of this novel strategy in detecting trace l-Cys by Zn-MOP in complicated matrices. Copyright © 2017 Elsevier B.V. All rights reserved.

Behavioral responses of three lemur species to different food enrichment devices.

PubMed

Shapiro, Morgan E; Shapiro, Hannah G; Ehmke, Erin E

2018-05-01

Environmental enrichment is a tool used to promote the welfare and well-being of captive animals by encouraging the display of species-specific behaviors and reducing the stress or boredom induced by captive environments. Lemurs are highly endangered, yet few studies have analyzed the behavioral impacts of enrichment on captive populations. We studied the impacts of two novel enrichment devices on three lemur species (ring-tailed lemurs [Lemur catta], red-ruffed lemurs [Varecia rubra], and Coquerel's sifaka [Propithecus coquereli]) to determine both the overall and species-specific impacts of enrichment on lemur behavior. We recorded lemur behavior using the continuous sampling method to obtain behavior duration and analyzed our results using ANOVA Repeated Measures. Results showed enrichment effectiveness differed for each species and that different enrichment devices had varying impacts on lemur behavior across all species. We attributed the differences in species-specific responses to the unique locomotor patterns and methods of diet acquisition of each species, and the variances in behavioral responses across all species to the characteristics of each device. Our study highlights the importance of species-specific enrichment and encourages further research in this field in order to maximize the positive effects of enrichment, which in turn has the potential to affect the overall well-being of captive populations. © 2018 Wiley Periodicals, Inc.

Increase Concentration of Transforming Growth Factor Beta (TGF-β) in Breast Milk of Mothers With Psychological Disorders.

PubMed

Shariat, Mamak; Abedinia, Nasrin; Rezaei, Nima; Farrokhzad, Nahid

2017-07-01

Several studies have shown an imbalance between proinflammatory and anti-inflammatory cytokines in depression and anxiety disorders. However, less attention has been paid to the role of cytokines in psychological disorder in mothers who breastfeed. This study looks at whether concentration levels of TGF-β2 are altered in anxious and depressive breastfeeding mothers. This study checked the concentration level of TGF-B2 in relation with psychological symptoms on 110 breastfeeding mothers; based on random sampling method with using of Beck Depression Inventory (BDI), General Health Questionnaire (GHQ) and Spielberger Stress Scale (STAI) in 2015 also TGF-β2 was measured in breast milk using ELISA. We used of Pearson Correlation Method, independent t-test and one-way analysis of variance (ANOVA) to analyze the data. Psychological symptoms (Anxiety and depression) showed positive correlation with TGF-Beta level in which relationships were significant (P=0.01). Psychological problems may be uniquely associated with the level of TGF-β in breast milk. More attention should be paid to the mental health of mothers during breastfeeding, and more research needs to be done in this subject to clarify the relationship between psychological variables with the level of TGF-β in breast milk.

Preparation of photocatalytic ZnO nanoparticles and application in photochemical degradation of betamethasone sodium phosphate using taguchi approach

NASA Astrophysics Data System (ADS)

Giahi, M.; Farajpour, G.; Taghavi, H.; Shokri, S.

2014-07-01

In this study, ZnO nanoparticles were prepared by a sol-gel method for the first time. Taguchi method was used to identify the several factors that may affect degradation percentage of betamethasone sodium phosphate in wastewater in UV/K2S2O8/nano-ZnO system. Our experimental design consisted of testing five factors, i.e., dosage of K2S2O8, concentration of betamethasone sodium phosphate, amount of ZnO, irradiation time and initial pH. With four levels of each factor tested. It was found that, optimum parameters are irradiation time, 180 min; pH 9.0; betamethasone sodium phosphate, 30 mg/L; amount of ZnO, 13 mg; K2S2O8, 1 mM. The percentage contribution of each factor was determined by the analysis of variance (ANOVA). The results showed that irradiation time; pH; amount of ZnO; drug concentration and dosage of K2S2O8 contributed by 46.73, 28.56, 11.56, 6.70, and 6.44%, respectively. Finally, the kinetics process was studied and the photodegradation rate of betamethasone sodium phosphate was found to obey pseudo-first-order kinetics equation represented by the Langmuir-Hinshelwood model.

Comparative assessment of antibacterial efficacy of aqueous extract of commercially available black, green, and lemon tea: an in vitro study

PubMed Central

Arun, S. Dodamani; Minal, M. Kshirsagar; Karibasappa, G. N.; Prashanth, V. K.; Girija, A. Dodamani; Harish, C. Jadhav

2017-01-01

Objectives: The objective of this study is to determine and compare antibacterial efficacy of aqueous extracts of black, green, and lemon tea of a commercially available brand. Materials and Methods: The well-diffusion method was used to evaluate the antibacterial efficacy of commercially available black tea, green tea, and lemon tea at three different concentrations (1.5 g, 5 g, and 7.5 g) against Streptococcus mutans and Lactobacillus acidophilus. After incubation in appropriate culture medium, diameter of zone of inhibition was measured to assess the antibacterial efficacy of tea. Results: Maximum zone of inhibition was found with lemon tea (27 mm) followed by green tea (26 mm) and black tea (13 mm) against S. mutans and L. acidophilus. Zone of inhibition was highest at 7.5 g concentration (1 and half tea spoon) for lemon tea followed by green tea and black tea. Results were statistically analyzed with the analysis of variance (ANOVA). For pairwise intergroup multiple comparisons, bonferroni test was applied. The difference between black tea, green tea, and lemon tea were statistically significant (P < 0.001) at 5% of level of significance. Conclusion: Lemon tea at 7.5 g concentration was more effective followed by green tea and black tea against S. mutans and L. acidophilus. PMID:29085267

An improved method for total organic iodine in drinking water.

PubMed

Sayess, Rassil; Reckhow, David A

2017-01-01

A concise, rapid, and sensitive method is developed to measure organically-bound iodine in water. Total organic iodine (TOI) is used as an integrative surrogate that reflects the amount of iodinated organics in a water sample and is quantified using a refined method that builds on previous adsorption and detection approaches. The proposed method combines adsorption, combustion, and trapping of combustion products, with an offline inductively coupled plasma/mass spectrometer (ICP-MS) for iodide detection. During method development, three analytical variables (factors) were varied across two levels each in order to optimize the method for iodine recovery: 1) the sample pH prior to adsorption on the granular activated carbon (GAC); 2) the amount of base addition to the trap solution; and 3) composition of the ICP-MS wash solution. These factors were tested with solutions of eight iodinated model organic compounds, two iodinated inorganic compounds, and field water samples using a full factorial experimental design. An analysis of variance (ANOVA) and related statistical methods were deployed to identify the best combination of conditions (i.e., treatment) that results in the most complete recovery of iodine from the model compounds and the highest rejection of inorganic iodine. The chosen treatment for TOI measurement incorporates a sample pH of less than 1 prior to adsorption onto the GAC, a solution of 2% (v/v) tetramethyl ammonium hydroxide (TMAH) for trapping of combustion products, and a TMAH wash solution of 0.1% (v/v) for the ICP-MS. Copyright © 2016 Elsevier Ltd. All rights reserved.

The application of continuous wavelet transform and least squares support vector machine for the simultaneous quantitative spectrophotometric determination of Myricetin, Kaempferol and Quercetin as flavonoids in pharmaceutical plants

NASA Astrophysics Data System (ADS)

Sohrabi, Mahmoud Reza; Darabi, Golnaz

2016-01-01

Flavonoids are γ-benzopyrone derivatives, which are highly regarded in these researchers for their antioxidant property. In this study, two new signals processing methods been coupled with UV spectroscopy for spectral resolution and simultaneous quantitative determination of Myricetin, Kaempferol and Quercetin as flavonoids in Laurel, St. John's Wort and Green Tea without the need for any previous separation procedure. The developed methods are continuous wavelet transform (CWT) and least squares support vector machine (LS-SVM) methods integrated with UV spectroscopy individually. Different wavelet families were tested by CWT method and finally the Daubechies wavelet family (Db4) for Myricetin and the Gaussian wavelet families for Kaempferol (Gaus3) and Quercetin (Gaus7) were selected and applied for simultaneous analysis under the optimal conditions. The LS-SVM was applied to build the flavonoids prediction model based on absorption spectra. The root mean square errors for prediction (RMSEP) of Myricetin, Kaempferol and Quercetin were 0.0552, 0.0275 and 0.0374, respectively. The developed methods were validated by the analysis of the various synthetic mixtures associated with a well- known flavonoid contents. Mean recovery values of Myricetin, Kaempferol and Quercetin, in CWT method were 100.123, 100.253, 100.439 and in LS-SVM method were 99.94, 99.81 and 99.682, respectively. The results achieved by analyzing the real samples from the CWT and LS-SVM methods were compared to the HPLC reference method and the results were very close to the reference method. Meanwhile, the obtained results of the one-way ANOVA (analysis of variance) test revealed that there was no significant difference between the suggested methods.

Generational differences of baccalaureate nursing students' preferred teaching methods and faculty use of teaching methods

NASA Astrophysics Data System (ADS)

Delahoyde, Theresa

Nursing education is experiencing a generational phenomenon with student enrollment spanning three generations. Classrooms of the 21st century include the occasional Baby Boomer and a large number of Generation X and Generation Y students. Each of these generations has its own unique set of characteristics that have been shaped by values, trends, behaviors, and events in society. These generational characteristics create vast opportunities to learn, as well as challenges. One such challenge is the use of teaching methods that are congruent with nursing student preferences. Although there is a wide range of studies conducted on student learning styles within the nursing education field, there is little research on the preferred teaching methods of nursing students. The purpose of this quantitative, descriptive study was to compare the preferred teaching methods of multi-generational baccalaureate nursing students with faculty use of teaching methods. The research study included 367 participants; 38 nursing faculty and 329 nursing students from five different colleges within the Midwest region. The results of the two-tailed t-test found four statistically significant findings between Generation X and Y students and their preferred teaching methods including; lecture, listening to the professor lecture versus working in groups; actively participating in group discussion; and the importance of participating in group assignments. The results of the Analysis of Variance (ANOVA) found seventeen statistically significant findings between levels of students (freshmen/sophomores, juniors, & seniors) and their preferred teaching methods. Lecture was found to be the most frequently used teaching method by faculty as well as the most preferred teaching method by students. Overall, the support for a variety of teaching methods was also found in the analysis of data.

The application of continuous wavelet transform and least squares support vector machine for the simultaneous quantitative spectrophotometric determination of Myricetin, Kaempferol and Quercetin as flavonoids in pharmaceutical plants.

PubMed

Sohrabi, Mahmoud Reza; Darabi, Golnaz

2016-01-05

Flavonoids are γ-benzopyrone derivatives, which are highly regarded in these researchers for their antioxidant property. In this study, two new signals processing methods been coupled with UV spectroscopy for spectral resolution and simultaneous quantitative determination of Myricetin, Kaempferol and Quercetin as flavonoids in Laurel, St. John's Wort and Green Tea without the need for any previous separation procedure. The developed methods are continuous wavelet transform (CWT) and least squares support vector machine (LS-SVM) methods integrated with UV spectroscopy individually. Different wavelet families were tested by CWT method and finally the Daubechies wavelet family (Db4) for Myricetin and the Gaussian wavelet families for Kaempferol (Gaus3) and Quercetin (Gaus7) were selected and applied for simultaneous analysis under the optimal conditions. The LS-SVM was applied to build the flavonoids prediction model based on absorption spectra. The root mean square errors for prediction (RMSEP) of Myricetin, Kaempferol and Quercetin were 0.0552, 0.0275 and 0.0374, respectively. The developed methods were validated by the analysis of the various synthetic mixtures associated with a well- known flavonoid contents. Mean recovery values of Myricetin, Kaempferol and Quercetin, in CWT method were 100.123, 100.253, 100.439 and in LS-SVM method were 99.94, 99.81 and 99.682, respectively. The results achieved by analyzing the real samples from the CWT and LS-SVM methods were compared to the HPLC reference method and the results were very close to the reference method. Meanwhile, the obtained results of the one-way ANOVA (analysis of variance) test revealed that there was no significant difference between the suggested methods. Copyright © 2015 Elsevier B.V. All rights reserved.

Two Methods of Automatic Evaluation of Speech Signal Enhancement Recorded in the Open-Air MRI Environment

NASA Astrophysics Data System (ADS)

Přibil, Jiří; Přibilová, Anna; Frollo, Ivan

2017-12-01

The paper focuses on two methods of evaluation of successfulness of speech signal enhancement recorded in the open-air magnetic resonance imager during phonation for the 3D human vocal tract modeling. The first approach enables to obtain a comparison based on statistical analysis by ANOVA and hypothesis tests. The second method is based on classification by Gaussian mixture models (GMM). The performed experiments have confirmed that the proposed ANOVA and GMM classifiers for automatic evaluation of the speech quality are functional and produce fully comparable results with the standard evaluation based on the listening test method.

Effect of insertion method and postinsertion time interval prior to force application on the removal torque of orthodontic miniscrews.

PubMed

Sharifi, Maryam; Ghassemi, Amirreza; Bayani, Shahin

2015-01-01

Success of orthodontic miniscrews in providing stable anchorage is dependent on their stability. The purpose of this study was to assess the effect of insertion method and postinsertion time interval on the removal torque of miniscrews as an indicator of their stability. Seventy-two miniscrews (Jeil Medical) were inserted into the femoral bones of three male German Shepherd dogs and assigned to nine groups of eight miniscrews. Three insertion methods, including hand-driven, motor-driven with 5.0-Ncm insertion torque, and motor-driven with 20.0-Ncm insertion torque, were tested. Three time intervals of 0, 2, and 6 weeks between miniscrew insertion and removal were tested as well. Removal torque values were measured in newton centimeters by a removal torque tester (IMADA). Data were analyzed by one-way analysis of variance (ANOVA) followed by the Bonferroni post hoc test at a .05 level of significance. A miniscrew survival rate of 93% was observed in this study. The highest mean value of removal torque among the three postinsertion intervals (2.4 ± 0.59 Ncm) was obtained immediately after miniscrew insertion with a statistically significant difference from the other two time intervals (P < .001). Insertion were observed in this regard (P = .46). The stability of miniscrews was not affected by the insertion method. However, of the postinsertion time intervals, the highest removal torque values were obtained immediately after insertion.

Adaptive Prior Variance Calibration in the Bayesian Continual Reassessment Method

PubMed Central

Zhang, Jin; Braun, Thomas M.; Taylor, Jeremy M.G.

2012-01-01

Use of the Continual Reassessment Method (CRM) and other model-based approaches to design in Phase I clinical trials has increased due to the ability of the CRM to identify the maximum tolerated dose (MTD) better than the 3+3 method. However, the CRM can be sensitive to the variance selected for the prior distribution of the model parameter, especially when a small number of patients are enrolled. While methods have emerged to adaptively select skeletons and to calibrate the prior variance only at the beginning of a trial, there has not been any approach developed to adaptively calibrate the prior variance throughout a trial. We propose three systematic approaches to adaptively calibrate the prior variance during a trial and compare them via simulation to methods proposed to calibrate the variance at the beginning of a trial. PMID:22987660

Effects of shallow and deep endotracheal tube suctioning on cardiovascular indices in patients in intensive care units.

PubMed

Irajpour, Alireza; Abbasinia, Mohammad; Hoseini, Abbas; Kashefi, Parviz

2014-07-01

Clearing the endotracheal tube through suctioning should be done to promote oxygenation. Depth of suctioning is one of the variables in this regard. In shallow suctioning method, the catheter passes to the tip of the endotracheal tube, and in deep suctioning method, it passes beyond the tip into the trachea or brunches. This study aimed to evaluate the effect of shallow and deep suctioning methods on cardiovascular indices in patients hospitalized in the intensive care units (ICUs). In this clinical trial, 74 patients were selected among those who had undergone mechanical ventilation in the ICU of Al-Zahra Hospital, Isfahan, Iran using convenience sampling method. The subjects were randomly allocated to shallow and deep suctioning groups. Heart rate (HR) and blood pressure (BP) were measured immediately before and 1, 2, and 3 min after each suctioning. Number of times of suctioning was also noted in both the groups. Data were analyzed using repeated measures analysis of variance (ANOVA), Chi-square and independent t-tests. HR and BP were significantly increased after suctioning in both the groups (P < 0.05). But these changes were not significant between the two groups (P > 0.05). The suctioning count was significantly higher in the shallow suctioning group than in the deep suctioning group. Shallow and deep suctioning were similar in their effects on HR and BP, but shallow suctioning caused further manipulation of patient's trachea than deep suctioning method. Therefore, in order to prevent complications, nurses are recommended to perform the endotracheal tube suctioning by the deep method.

On the Methods for Estimating the Corneoscleral Limbus.

PubMed

Jesus, Danilo A; Iskander, D Robert

2017-08-01

The aim of this study was to develop computational methods for estimating limbus position based on the measurements of three-dimensional (3-D) corneoscleral topography and ascertain whether corneoscleral limbus routinely estimated from the frontal image corresponds to that derived from topographical information. Two new computational methods for estimating the limbus position are proposed: One based on approximating the raw anterior eye height data by series of Zernike polynomials and one that combines the 3-D corneoscleral topography with the frontal grayscale image acquired with the digital camera in-built in the profilometer. The proposed methods are contrasted against a previously described image-only-based procedure and to a technique of manual image annotation. The estimates of corneoscleral limbus radius were characterized with a high precision. The group average (mean ± standard deviation) of the maximum difference between estimates derived from all considered methods was 0.27 ± 0.14 mm and reached up to 0.55 mm. The four estimating methods lead to statistically significant differences (nonparametric ANOVA (the Analysis of Variance) test, p 0.05). Precise topographical limbus demarcation is possible either from the frontal digital images of the eye or from the 3-D topographical information of corneoscleral region. However, the results demonstrated that the corneoscleral limbus estimated from the anterior eye topography does not always correspond to that obtained through image-only based techniques. The experimental findings have shown that 3-D topography of anterior eye, in the absence of a gold standard, has the potential to become a new computational methodology for estimating the corneoscleral limbus.

Self‐assessment of refractive errors using a simple optical approach

PubMed Central

Kraft, Caroline; Ohlendorf, Arne; Wahl, Siegfried

2018-01-01

Background This explorative study investigated procedures for the self‐assessment of spherocylindrical refractive errors. Methods Eighteen participants with a mean age of 34.0 ± 8.8 years were enrolled. Adjustable Alvarez lenses were mounted in a rotatable ring holder and two procedures were tested for the self‐adjustment: (1) rotation of the lens in three meridians: 0°, 60° and 120° and (2) rotation of the optotypes in the same meridians. Starting from maximum positive power, the participants were required to decrease the power of the Alvarez lens until the optotypes (0.0 logMAR) appeared to be clear the first time. Best‐corrected visual acuity (BVA) was measured using a psychophysical staircase procedure. Bland–Altmann analysis was carried out in order to calculate the limits of agreement between the self‐refraction method and the standard subjective refraction. Results Using procedure 1, 77 per cent of the subjects achieved a VA ≥ 0.1 logMAR (6/7.5) and the same was true for 88 per cent of the subjects using procedure 2. Using procedure 1, a significantly worse BVA was found, when compared to subjective refraction (ΔVA = −0.15 logMAR, F3,140 = 7.11, p = 0.046, median test). Analysis of variance (ANOVA) analysis showed a significant influence of the refraction method on the oblique astigmatism component J45 but not for the spherical equivalent M and the straight astigmatism component J0 (M: F3,140 = 0.532, p = 0.661; J0: F3,140 = 0.056, p = 0.983; J45: F3,140 = 13.97, p < 0.001; ANOVA). The limits of agreement for the spherical equivalent error M were ± 1.10 D and ± 1.20 D and for the astigmatic components J0 ± 0.78 D and ± 0.59 D and for J45 ± 0.62 D and ± 0.54 D, for procedure 1 and procedure 2, respectively. Conclusions Fixed adjustable Alvarez lenses and rotatable stimuli can provide a fast and precise self‐assessment method to measure the spherocylindrical error of the eye. PMID:29356102

Marginal Adaptation and Quality of Interfaces in Lithium Disilicate Crowns - Influence of Manufacturing and Cementation Techniques.

PubMed

Melo Freire, C A; Borges, G A; Caldas, Dbm; Santos, R S; Ignácio, S A; Mazur, R F

To evaluate the cement line thickness and the interface quality in milled or injected lithium disilicate ceramic restorations and their influence on marginal adaptation using different cement types and different adhesive cementation techniques. Sixty-four bovine teeth were prepared for full crown restoration (7.0±0.5 mm in height, 8.0 mm in cervical diameter, and 4.2 mm in incisal diameter) and were divided into two groups: CAD/CAM automation technology, IPS e.max CAD (CAD), and isostatic injection by heat technology, IPS e.max Press (PRESS). RelyX ARC (ARC) and RelyX U200 resin cements were used as luting agents in two activation methods: initial self-activation and light pre-activation for one second (tack-cure). Next, the specimens were stored in distilled water at 23°C ± 2°C for 72 hours. The cement line thickness was measured in micrometers, and the interface quality received scores according to the characteristics and sealing aspects. The evaluations were performed with an optical microscope, and scanning electron microscope images were presented to demonstrate the various features found in the cement line. For the cement line thickness, data were analyzed with three-way analysis of variance (ANOVA) and the Games-Howell test (α=0.05). For the variable interface quality, the data were analyzed with the Mann-Whitney U-test, the Kruskal-Wallis test, and multiple comparisons nonparametric Dunn test (α=0.05). The ANOVA presented statistical differences among the ceramic restoration manufacturing methods as well as a significant interaction between the manufacturing methods and types of cement (p<0.05). The U200 presented lower cement line thickness values when compared to the ARC with both cementation techniques (p<0.05). With regard to the interface quality, the Mann-Whitney U-test and the Kruskal-Wallis test demonstrated statistical differences between the ceramic restoration manufacturing methods and cementation techniques. The PRESS ceramics obtained lower scores than did the CAD ceramics when using ARC cement (p<0.05). Milled restorations cemented with self-adhesive resin cement resulted in a thinner cement line that is statistically different from that of CAD or pressed ceramics cemented with resin cement with adhesive application. No difference between one-second tack-cure and self-activation was noted.

Contributions of dopamine-related genes and environmental factors to highly sensitive personality: a multi-step neuronal system-level approach.

PubMed

Chen, Chunhui; Chen, Chuansheng; Moyzis, Robert; Stern, Hal; He, Qinghua; Li, He; Li, Jin; Zhu, Bi; Dong, Qi

2011-01-01

Traditional behavioral genetic studies (e.g., twin, adoption studies) have shown that human personality has moderate to high heritability, but recent molecular behavioral genetic studies have failed to identify quantitative trait loci (QTL) with consistent effects. The current study adopted a multi-step approach (ANOVA followed by multiple regression and permutation) to assess the cumulative effects of multiple QTLs. Using a system-level (dopamine system) genetic approach, we investigated a personality trait deeply rooted in the nervous system (the Highly Sensitive Personality, HSP). 480 healthy Chinese college students were given the HSP scale and genotyped for 98 representative polymorphisms in all major dopamine neurotransmitter genes. In addition, two environment factors (stressful life events and parental warmth) that have been implicated for their contributions to personality development were included to investigate their relative contributions as compared to genetic factors. In Step 1, using ANOVA, we identified 10 polymorphisms that made statistically significant contributions to HSP. In Step 2, these polymorphism's main effects and interactions were assessed using multiple regression. This model accounted for 15% of the variance of HSP (p<0.001). Recent stressful life events accounted for an additional 2% of the variance. Finally, permutation analyses ascertained the probability of obtaining these findings by chance to be very low, p ranging from 0.001 to 0.006. Dividing these loci by the subsystems of dopamine synthesis, degradation/transport, receptor and modulation, we found that the modulation and receptor subsystems made the most significant contribution to HSP. The results of this study demonstrate the utility of a multi-step neuronal system-level approach in assessing genetic contributions to individual differences in human behavior. It can potentially bridge the gap between the high heritability estimates based on traditional behavioral genetics and the lack of reproducible genetic effects observed currently from molecular genetic studies.

Contributions of Dopamine-Related Genes and Environmental Factors to Highly Sensitive Personality: A Multi-Step Neuronal System-Level Approach

PubMed Central

Chen, Chunhui; Chen, Chuansheng; Moyzis, Robert; Stern, Hal; He, Qinghua; Li, He; Li, Jin; Zhu, Bi; Dong, Qi

2011-01-01

Traditional behavioral genetic studies (e.g., twin, adoption studies) have shown that human personality has moderate to high heritability, but recent molecular behavioral genetic studies have failed to identify quantitative trait loci (QTL) with consistent effects. The current study adopted a multi-step approach (ANOVA followed by multiple regression and permutation) to assess the cumulative effects of multiple QTLs. Using a system-level (dopamine system) genetic approach, we investigated a personality trait deeply rooted in the nervous system (the Highly Sensitive Personality, HSP). 480 healthy Chinese college students were given the HSP scale and genotyped for 98 representative polymorphisms in all major dopamine neurotransmitter genes. In addition, two environment factors (stressful life events and parental warmth) that have been implicated for their contributions to personality development were included to investigate their relative contributions as compared to genetic factors. In Step 1, using ANOVA, we identified 10 polymorphisms that made statistically significant contributions to HSP. In Step 2, these polymorphism's main effects and interactions were assessed using multiple regression. This model accounted for 15% of the variance of HSP (p<0.001). Recent stressful life events accounted for an additional 2% of the variance. Finally, permutation analyses ascertained the probability of obtaining these findings by chance to be very low, p ranging from 0.001 to 0.006. Dividing these loci by the subsystems of dopamine synthesis, degradation/transport, receptor and modulation, we found that the modulation and receptor subsystems made the most significant contribution to HSP. The results of this study demonstrate the utility of a multi-step neuronal system-level approach in assessing genetic contributions to individual differences in human behavior. It can potentially bridge the gap between the high heritability estimates based on traditional behavioral genetics and the lack of reproducible genetic effects observed currently from molecular genetic studies. PMID:21765900

Unraveling bacterial fingerprints of city subways from microbiome 16S gene profiles.

PubMed

Walker, Alejandro R; Grimes, Tyler L; Datta, Somnath; Datta, Susmita

2018-05-22

Microbial communities can be location specific, and the abundance of species within locations can influence our ability to determine whether a sample belongs to one city or another. As part of the 2017 CAMDA MetaSUB Inter-City Challenge, next generation sequencing (NGS) data was generated from swipe samples collected from subway stations in Boston, New York City hereafter New York, and Sacramento. DNA was extracted and Illumina sequenced. Sequencing data was provided for all cities as part of 2017 CAMDA contest challenge dataset. Principal component analysis (PCA) showed clear clustering of the samples for the three cities, with a substantial proportion of the variance explained by the first three components. We ran two different classifiers and results were robust for error rate (< 6%) and accuracy (> 95%). The analysis of variance (ANOVA) demonstrated that overall, bacterial composition across the three cities is significantly different. A similar conclusion was reached using a novel bootstrap based test using diversity indices. Last but not least, a co-abundance association network analyses for the taxonomic levels "order", "family", and "genus" found different patterns of bacterial networks for the three cities. Bacterial fingerprint can be useful to predict sample provenance. In this work prediction of provenance reported with over 95% accuracy. Association based network analysis, emphasized similarities between the closest cities sharing common bacterial composition. ANOVA showed different patterns of bacterial amongst cities, and these findings strongly suggest that bacterial signature across multiple cities are different. This work advocates a data analysis pipeline which could be followed in order to get biological insight from this data. However, the biological conclusions from this analysis is just an early indication out of a pilot microbiome data provided to us through CAMDA 2017 challenge and will be subject to change as we get more complete data sets in the near future. This microbiome data can have potential applications in forensics, ecology, and other sciences. This article was reviewed by Klas Udekwu, Alexandra Graf, and Rafal Mostowy.

Efficiency of two constructs called "fear of disease" and "perceived severity of disease" on the prevention of gastric cancer: Application of protection motivation theory

PubMed Central

Baghiani- Moghadam, Mohamad Hosein; Seyedi-Andi, Seyed Jalil; Shokri-Shirvani, Javad; Khafri, Sorayya; Ghadimi, Reza; Parsian, Hadi

2015-01-01

Background: Among all cancers, malignancies of gastrointestinal tract are the most common cancer among Iranian population. Dietary behavior is thought to be the most important risk factor in gastric cancer. Fear and perceived severity are two important constructs of the protection motivation theory (PMT). Despite the evidence of the impact of these two constructs in modifying dietary habits against gastric cancer, their efficiency is not well established. Therefore, the present study was designed to determine the efficiency of the mentioned constructs. Methods: This cross-sectional study was performed on 360 participants (180 males and 180 females) aged over 30 years old who presented to health centers in Babol, Iran in 2014. They were selected by a cluster sampling method in a population covered by health centers in Babol. Data collection was done using a questionnaire with acceptable reliability and validity, designed by a researcher based on two constructs of protection motivation theory. The data were analyzed by SPSS Version 20 using descriptive and analytical statistics such as ANOVA, linear and logistic regression analysis. Results: The participants who entered in the study achieved 38.6 and 69.7% of the scores of fear and perceived severity, respectively. There was a significant difference between perceived severity with level of education (p<0.05). There was a significant inverse correlation between perceived severity with nutritional high risk behavior associated with gastric cancer in the significant level of 0.05 (r=-0.165). The constructs of perceived severity and fear predicted 38% of the variance of nutritional high risk behaviors associated with gastric cancer. Conclusion: Constructs of fear and perceived severity of protection motivation theory with predicting 38% of the variance of nutritional high risk behaviors had an effective role against gastric cancer and may help in the design and implementation of educational programs for the prevention of gastric cancer. PMID:26644893

Gloss and Stain Resistance of Ceramic-Polymer CAD/CAM Restorative Blocks.

PubMed

Lawson, Nathaniel C; Burgess, John O

2016-03-01

To evaluate the gloss and stain resistance of several new ceramic-polymer CAD/CAM blocks Specimens (4 mm) were sectioned from: Enamic (polymer-infused ceramic), LAVA Ultimate (nano-ceramic reinforced polymer), e.max (lithium disilicate), Paradigm C (porcelain), and Paradigm MZ100 (composite). Specimens were wet polished on a polishing wheel to either 320 grit silicon paper (un-polished, N = 8) or 2000 grit silicon carbide papers followed by a 0.05 μm alumina slurry (polished, N = 8). Initial gloss and color (L*a*b*) values were measured. Specimens were stored in a staining solution at 37°C in darkness for 12 days (simulating 1 year). After storage, L*a*b* values re-measured. Change in color was reported as ΔE00 based on the CIEDE2000 formula. Gloss and ΔE00 were analyzed by two-way analysis of variance (ANOVA) (alpha = .05). Separate one-way ANOVA and Tukey post-hoc analyses were performed for both polish conditions and all materials. Two-way ANOVA showed that factors material, polish and their interaction were significant for both gloss and ΔE00 (p < .01). Post-hoc analysis reveals that polished specimens had significantly less color change than un-polished specimens for Paradigm C and LAVA Ultimate. E.max had significantly higher gloss and less color change than all other materials. The composition and polish of CAD/CAM materials affects gloss and stain resistance. Ceramic-polymer hybrid materials can achieve the high gloss required for esthetic restorations. These materials should be polished in order to minimize staining. If polished, all of the tested materials exhibited clinically acceptable color changes at 1 year of simulated staining. (J Esthet Restor Dent 28:S40-S45, 2016). © 2015 Wiley Periodicals, Inc.

Effect of spatial resolution on remote sensing estimation of total evaporation in the uMngeni catchment, South Africa

NASA Astrophysics Data System (ADS)

Shoko, Cletah; Clark, David; Mengistu, Michael; Dube, Timothy; Bulcock, Hartley

2015-01-01

This study evaluated the effect of two readily available multispectral sensors: the newly launched 30 m spatial resolution Landsat 8 and the long-serving 1000 m moderate resolution imaging spectroradiometer (MODIS) datasets in the spatial representation of total evaporation in the heterogeneous uMngeni catchment, South Africa, using the surface energy balance system model. The results showed that sensor spatial resolution plays a critical role in the accurate estimation of energy fluxes and total evaporation across a heterogeneous catchment. Landsat 8 estimates showed better spatial representation of the biophysical parameters and total evaporation for different land cover types, due to the relatively higher spatial resolution compared to the coarse spatial resolution MODIS sensor. Moreover, MODIS failed to capture the spatial variations of total evaporation estimates across the catchment. Analysis of variance (ANOVA) results showed that MODIS-based total evaporation estimates did not show any significant differences across different land cover types (one-way ANOVA; F1.924=1.412, p=0.186). However, Landsat 8 images yielded significantly different estimates between different land cover types (one-way ANOVA; F1.993=5.185, p<0.001). The validation results showed that Landsat 8 estimates were more comparable to eddy covariance (EC) measurements than the MODIS-based total evaporation estimates. EC measurement on May 23, 2013, was 3.8 mm/day, whereas the Landsat 8 estimate on the same day was 3.6 mm/day, with MODIS showing significantly lower estimates of 2.3 mm/day. The findings of this study underscore the importance of spatial resolution in estimating spatial variations of total evaporation at the catchment scale, thus, they provide critical information on the relevance of the readily available remote sensing products in water resources management in data-scarce environments.

Experimental Psychological Stress on Quantitative Sensory Testing Response in Patients with Temporomandibular Disorders.

PubMed

Araújo Oliveira Ferreira, Dyna Mara; Costa, Yuri Martins; de Quevedo, Henrique Müller; Bonjardim, Leonardo Rigoldi; Rodrigues Conti, Paulo César

2018-05-15

To assess the modulatory effects of experimental psychological stress on the somatosensory evaluation of myofascial temporomandibular disorder (TMD) patients. A total of 20 women with myofascial TMD and 20 age-matched healthy women were assessed by means of a standardized battery of quantitative sensory testing. Cold detection threshold (CDT), warm detection threshold (WDT), cold pain threshold (CPT), heat pain threshold (HPT), mechanical pain threshold (MPT), wind-up ratio (WUR), and pressure pain threshold (PPT) were performed on the facial skin overlying the masseter muscle. The variables were measured in three sessions: before (baseline) and immediately after the Paced Auditory Serial Addition Task (PASAT) (stress) and then after a washout period of 20 to 30 minutes (poststress). Mixed analysis of variance (ANOVA) was applied to the data, and the significance level was set at P = .050. A significant main effect of the experimental session on all thermal tests was found (ANOVA: F > 4.10, P < .017), where detection tests presented an increase in thresholds in the poststress session compared to baseline (CDT, P = .012; WDT, P = .040) and pain thresholds were reduced in the stress (CPT, P < .001; HPT, P = .001) and poststress sessions (CPT, P = .005; HPT, P = .006) compared to baseline. In addition, a significant main effect of the study group on all mechanical tests (MPT, WUR, and PPT) was found (ANOVA: F > 4.65, P < .037), where TMD patients were more sensitive than healthy volunteers. Acute mental stress conditioning can modulate thermal sensitivity of the skin overlying the masseter in myofascial TMD patients and healthy volunteers. Therefore, psychological stress should be considered in order to perform an unbiased somatosensory assessment of TMD patients.

Nutritional status, fertility and factors associated with anaemia: a cross sectional study among a rural population of Muslim women in Assam, India.

PubMed

Haloi, Anjali; Limbu, Dhruba Kumar

2013-01-01

In the present study an attempt has been made to report on the nutritional status of the Assamese Muslim women of Dadara and Agyathuri villages of the Kamrup district in Assam, India on their basis of body mass index (BMI) and haemoglobin (hb) content. Cross sectional data on 1034 women belonging to the age group of 19 years and above were collected following internationally accepted standards. The fertility of mothers by BMI range was found to be highest (6.50 (mean) +/- 0.14 (SE) and range being 1-11) amongst underweight mothers. The one-way analysis of variance (ANOVA) test of BMI and fertility shows significant relation between different BMI groups withp < 0.01. Highest haemoglobin levels were recorded in the age group of < or = 23 years with a mean of 11.61 +/- 0.06 g/dl, the range being 9.8-13.9 g/dl. Whereas lowest levels of haemoglobin were found in the age groups of 44+ years having a mean value of 10.26 +/- 0.04 g/dl and a range of 9.2-11.8 g/dl. The ANOVA analysis for haemoglobin content and corresponding fertility rates show significant difference between different hemoglobin levels with their live births at p < 0.01. The summary of ANOVA analysis for haemoglobin and BMI range shows the significant difference between groups i.e., normal, overweight and underweight. The t-value and F-ratio is 118.61 and 14068.42, respectively, which is significant at 1% probability. The authors conclude a general trend in the study population of women with high fertility having poor nutritional status. These findings might be important in formulating responsive health policies in an underdeveloped region.

Plasma iron levels appraised 15 days after spinal cord injury in a limb movement animal model.

PubMed

Reis, F M; Esteves, A M; Tufik, S; de Mello, M T

2011-03-01

Experimental, controlled trial. The purpose of this study was to evaluate plasma iron and transferrin levels in a limb movement animal model with spinal cord injury (SCI). Universidade Federal de São Paulo, Departamento de Psicobiologia. In all, 72 male Wistar rats aged 90 days were divided into four groups: (1) acute SCI (1 day, SCI1), (2) 3 days post-SCI (SCI3), (3) 7 days post-SCI (SCI7) and (4) 15 days post-SCI (SCI15). Each of these groups had corresponding control (CTRL) and SHAM groups. Plasma iron and transferrin levels of the different groups were analyzed using a one-way analysis of variance (ANOVA) followed by Tukey's test. We found a significant reduction in iron plasma levels after SCI compared with the CTRL group: SCI1 (CTRL: 175±10.58 μg dl(-1); SCI: 108.28±11.7 μg dl(-1)), SCI3 (CTRL: 195.5±11.00 μg dl(-1); SCI: 127.88±12.63 μg dl(-1)), SCI7 (CTRL: 186±2.97 μg dl(-1); SCI: 89.2±15.39 μg dl(-1)) and SCI15 (CTRL: 163±5.48 μg dl(-1); SCI: 124.44±10.30 μg dl(-1)) (P<0.05; ANOVA). The SHAM1 group demonstrated a reduction in iron plasma after acute SCI (CTRL: 175±10.58 μg dl(-1); SHAM: 114.60±7.81 μg dl(-1)) (P<0.05; ANOVA). Reduced iron metabolism after SCI may be one of the mechanisms involved in the pathogenesis of sleep-related movement disorders.

Students' perceptions of vertical and horizontal integration in a discipline-based dental school.

PubMed

Postma, T C; White, J G

2017-05-01

Integration is a key concern in discipline-based undergraduate dental curricula. Therefore, this study compared feedback on integration from students who participated in different instructional designs in a Comprehensive Patient Care course. The study was conducted at the University of Pretoria (2009-2011). Third-year cohorts (Cohorts A, B and C) participated in pre-clinical case-based learning, whilst fourth-year cohorts (Cohorts D and E) received didactic teaching in Comprehensive Patient Care. Cohorts A, D and E practised clinical Comprehensive Patient Care in a discipline-based clinic. Cohort B conducted their Comprehensive Patient Care patient examinations in a dedicated facility supervised by dedicated faculty responsible to teach integration. Students had to indicate on visual analogue scales whether the way they were taught at the school helped them to integrate knowledge from the same (horizontal integration) and preceding (vertical integration) year of study. The end-points of the scales were defined as 'definitely' and 'not at all'. Analysis of variance (ANOVA) was employed to measure the differences between cohorts according to the year of study. Third-year case-based learning cohorts rated the horizontal integration close to 80/100 and vertical integration ranging from 64 to 71/100. In year four, Cohort B rated vertical and horizontal integration 9-15% higher (ANOVA, P < 0.05) than Cohorts A and D. In year five, Cohort A rated vertical and horizontal integration 11-18% higher (ANOVA, P < 0.05) than Cohorts D and E. Pre-clinical case-based learning and Comprehensive Patient Care supervised by dedicated faculty were associated with more favourable perceptions about integration in the discipline-based undergraduate dental curriculum. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The use of reinforced composite resin cement as compensation for reduced post length.

PubMed

Nissan, J; Dmitry, Y; Assif, D

2001-09-01

Cements that yield high retentive values are believed to allow use of shorter posts. This study investigated the use of reinforced composite resin cement as compensation for reduced dowel length. The retention values of stainless steel posts (parallel-sided ParaPost and tapered Dentatus in 5-, 8-, and 10-mm lengths) luted with Flexi-Flow titanium-reinforced composite resin and zinc phosphate cements were evaluated. Single-rooted extracted human teeth with crowns (n = 120), removed at the cementoenamel junction, were randomly divided into 4 groups of 30 samples each. Different post lengths were luted with either Flexi-Flow or zinc phosphate. Each sample was placed into a specialized jig and on a tensile testing machine with a crosshead speed of 2 mm/min, applied until failure. The effect of different posts and cements on the force required to dislodge the dowels was evaluated with multiple analyses of variance (ANOVA). One-way ANOVA with Scheffé contrast was applied to determine the effect of different post lengths on the retentive failure of posts luted with the 2 agents. Flexi-Flow reinforced composite resin cement significantly increased retention of ParaPost and Dentatus dowels (P<.001) compared with zinc phosphate. One-way ANOVA revealed no statistically significant difference (P>.05) between mean retention of both dowels luted with Flexi-Flow for all posts length used (5 mm = 8 mm = 10 mm). Mean retention values of the groups luted with zinc phosphate showed a statistically significant difference (P<.001) for the different post lengths (10 > 8 > 5 mm). Parallel-sided ParaPost dowels demonstrated a higher mean retention than tapered Dentatus dowels (P<.001). In this study, Flexi-Flow reinforced composite resin cement compensated for the reduced length of shorter parallel-sided ParaPost and tapered Dentatus dowels.

The association between Modic changes and pain during 1-year follow-up in patients with lumbar radicular pain.

PubMed

Schistad, Elina Iordanova; Espeland, Ansgar; Rygh, Lars Jørgen; Røe, Cecilie; Gjerstad, Johannes

2014-09-01

To examine whether Modic changes influence pain during a 1-year follow-up in patients with lumbar radicular pain. A total of 243 patients with lumbar radicular pain due to disc herniation were recruited from two hospitals in Norway and followed up at 6 weeks, 6 months, and 12 months. On baseline lumbar magnetic resonance images, two observers independently evaluated Modic changes (types I-III; craniocaudal size 0-3). Outcomes were sensory pain (McGill Pain Questionnaire), back and leg pain (visual analogue scale, VAS). Association between Modic type and outcomes was explored with a mixed model and then by two-way analysis of variance (ANOVA) at each time point with Modic and treatment groups (surgical, n = 126; nonsurgical, n = 117) as fixed factors, adjusted for disc degeneration, age, sex, smoking, and duration of radicular pain. Modic size was also analyzed using ANOVA. Pain scores had decreased significantly at 1-year follow-up. Modic type was significantly related to McGill sensory scores (mixed model: p = 0.014-0.026; ANOVA: p = 0.007 at 6 weeks), but not to VAS back pain or VAS leg pain scores. At 6 weeks, the mean McGill sensory score was higher in Modic I than in Modic II-III patients (p = 0.003) and in patients without Modic changes (p = 0.018). Modic size L1-S1 was not associated with pain outcomes. Patients with lumbar radicular pain have a substantial pain reduction during 1-year follow-up, but Modic type I changes may imply a slower initial decrease in sensory pain.

Online Estimation of Allan Variance Coefficients Based on a Neural-Extended Kalman Filter

PubMed Central

Miao, Zhiyong; Shen, Feng; Xu, Dingjie; He, Kunpeng; Tian, Chunmiao

2015-01-01

As a noise analysis method for inertial sensors, the traditional Allan variance method requires the storage of a large amount of data and manual analysis for an Allan variance graph. Although the existing online estimation methods avoid the storage of data and the painful procedure of drawing slope lines for estimation, they require complex transformations and even cause errors during the modeling of dynamic Allan variance. To solve these problems, first, a new state-space model that directly models the stochastic errors to obtain a nonlinear state-space model was established for inertial sensors. Then, a neural-extended Kalman filter algorithm was used to estimate the Allan variance coefficients. The real noises of an ADIS16405 IMU and fiber optic gyro-sensors were analyzed by the proposed method and traditional methods. The experimental results show that the proposed method is more suitable to estimate the Allan variance coefficients than the traditional methods. Moreover, the proposed method effectively avoids the storage of data and can be easily implemented using an online processor. PMID:25625903

The effect of different propolis harvest methods on its lead contents determined by ET AAS and UV-visS.

PubMed

Sales, A; Alvarez, A; Areal, M Rodriguez; Maldonado, L; Marchisio, P; Rodríguez, M; Bedascarrasbure, E

2006-10-11

Argentinean propolis is exported to different countries, specially Japan. The market demands propolis quality control according to international standards. The analytical determination of some metals, as lead in food, is very important for their high toxicity even in low concentrations and because of their harmful effects on health. Flavonoids, the main bioactive compounds of propolis, tend to chelate metals as lead, which becomes one of the main polluting agents of propolis. The lead found in propolis may come from the atmosphere or it may be incorporated in the harvest, extraction and processing methods. The aim of this work is to evaluate lead level on Argentinean propolis determined by electrothermal atomic absorption spectrometry (ET AAS) and UV-vis spectrophotometry (UV-visS) methods, as well as the effect of harvest methods on those contents. A randomized test with three different treatments of collection was made to evaluate the effect of harvest methods. These procedures were: separating wedges (traditional), netting plastic meshes and stamping out plastic meshes. By means of the analysis of variance technique for multiple comparisons (ANOVA) it was possible to conclude that there are significant differences between scraped and mesh methods (stamped out and mosquito netting meshes). The results obtained in the present test would allow us to conclude that mesh methods are more advisable than scraped ones in order to obtain innocuous and safe propolis with minor lead contents. A statistical comparison of lead determination by both, ET AAS and UV-visS methods, demonstrated that there is not a significant difference in the results achieved with the two analytical techniques employed.

Temporal variation of out-of-hospital cardiac arrests in an equatorial climate.

PubMed

Ong, Marcus Eh; Ng, Faith Sp; Yap, Susan; Yong, Kok Leong; Peberdy, Mary A; Ornato, Joseph P

2010-01-01

We aimed to determine whether there is a seasonal variation of out-of-hospital cardiac arrests (OHCA) in an equatorial climate, which does not experience seasonal environmental change. We conducted an observational prospective study looking at the occurrence of OHCA in Singapore. Included were all patients with OHCA presented to Emergency Departments across the country. We examined the monthly, daily, and hourly number of cases over a three-year period. Data was analyzed using analysis of variance (ANOVA). From October, 1st 2001 to October, 14th 2004, 2428 patients were enrolled in the study. Mean age for cardiac arrests was 60.6 years with 68.0% male. Ethnic distribution was 69.5% Chinese, 15.0% Malay, 11.0% Indian, and 4.4% Others. There was no significant seasonal variation (spring/summer/fall/winter) of events (ANOVA P = 0.71), monthly variation (P = 0.88) or yearly variation (P = 0.26). We did find weekly peaks on Mondays and a circadian pattern with daily peaks from 9-10 am. We did not find any discernable seasonal pattern of cardiac arrests. This contrasts with findings from temperate countries and suggests a climatic influence on cardiac arrest occurrence. We also found that sudden cardiac arrests follow a circadian pattern.

Chitinosans as tableting excipients for modified release delivery systems.

PubMed

Rege, P R; Shukla, D J; Block, L H

1999-04-20

The term 'chitinosans' embraces the spectrum of acetylated poly(N-glucosamines) ranging from chitin to chitosan. Chitinosans (I), at acidic pH, have protonated amines which can interact with oppositely charged drug ions and, thereby, modify drug release from drug delivery systems. Tablets were compressed from a physical mixture containing salicylic acid (II) as the model drug, I, and magnesium stearate. Five commercial I compounds, varying in degree of deacetylation and molecular weight, were selected. Tablets were compressed at 5000, 10 000, and 15 000 psig using a Carver and a single punch tablet press. The differential scanning calorimetry thermograms provided evidence of I-II interaction in the powder blend. Analysis of variance (ANOVA) indicated that the compression pressure did not significantly affect the crushing strength (CS) or the release profile of II from the I-matrix tablets (P?0.05). Furthermore, the ANOVA also indicated that the tablet press used during manufacture did not affect the above properties (P?0.05); however, the chitinosans significantly affected the CS as well as the release profile of II from I-matrix tablets (P<0.05). This study provides further evidence for the use of commercial I compounds as excipients for use in modified release drug delivery systems. Copyright.

Optimization of Culture Conditions for Enhanced Growth, Lipid and Docosahexaenoic Acid (DHA) Production of Aurantiochytrium SW1 by Response Surface Methodology.

PubMed

Nazir, Yusuf; Shuib, Shuwahida; Kalil, Mohd Sahaid; Song, Yuanda; Hamid, Aidil Abdul

2018-06-11

In this study, optimization of growth, lipid and DHA production of Aurantiochytrium SW1 was carried out using response surface methodology (RSM) in optimizing initial fructose concentration, agitation speed and monosodium glutamate (MSG) concentration. Central composite design was applied as the experimental design and analysis of variance (ANOVA) was used to analyze the data. ANOVA analysis revealed that the process which adequately represented by quadratic model was significant (p < 0.0001) for all the response. All the three factors were significant (p < 0.005) in influencing the biomass and lipid data while only two factors (agitation speed and MSG) gave significant effect on DHA production (p < 0.005). The estimated optimal conditions for enhanced growth, lipid and DHA production were 70 g/L fructose, 250 rpm agitation speed and 10 g/L MSG. Consequently, the quadratic model was validated by applying the estimated optimum conditions, which confirmed the model validity where 19.0 g/L biomass, 9.13 g/L lipid and 4.75 g/L of DHA were produced. The growth, lipid and DHA were 28, 36 and 35% respectively higher than that produced in the original medium prior to optimization.

Morphometric assessment of the red stripe weevils, Rhynchophorus vulneratus (Coleoptera: Curculionidae) from several localities in Malaysia

NASA Astrophysics Data System (ADS)

Sazali, Siti Nurlydia; Hazmi, Izfa Riza; Rahim, Faszly; Abang, Fatimah; Jemain, Abdul Aziz

2018-04-01

The recognition of intraspecific variation could enhance knowledge and understanding on the population divergence that might be resulted from different geographical areas. To study the possible effect derived from different locations, a morphometric study of the red stripe weevils, Rhynchophorus vulneratus from different localities in Malaysia was conducted using field and voucher specimens. A total of twenty-three morphological characters were examined from 108 individuals of R. vulneratus representing population of Kota Samarahan, Mukah and central of Peninsular Malaysia. The data were subjected to univariate one-way single factor analysis of variance (ANOVA) and analysed in factor analysis using SPSS version 22.0 software. Univariate ANOVA showed that all tested variables were significantly different (p<0.05) except for mesocoxal distance (MSD), meanwhile from the factor analysis, the first three factors with eigenvalues greater than 1.0 were successfully extracted, resulting in a high variation of 82.687%. For factor 1, 39.213% of total variation was recorded, factor 2 accounted for 34.096% and factor 3 contributing to 9.377%, respectively. The mixed plotting among the twenty-three morphological characters suggests a strong correlation among the parameters examined and further statistical analysis should be conducted to include environmental factors such as habitat types, food availability and predation effect.

Visuoconstructional Impairment in Subtypes of Mild Cognitive Impairment

PubMed Central

Ahmed, Samrah; Brennan, Laura; Eppig, Joel; Price, Catherine C.; Lamar, Melissa; Delano-Wood, Lisa; Bangen, Katherine J.; Edmonds, Emily C.; Clark, Lindsey; Nation, Daniel A.; Jak, Amy; Au, Rhoda; Swenson, Rodney; Bondi, Mark W.; Libon, David J.

2018-01-01

Clock Drawing Test performance was examined alongside other neuropsychological tests in mild cognitive impairment (MCI). We tested the hypothesis that clock-drawing errors are related to executive impairment. The current research examined 86 patients with MCI for whom, in prior research, cluster analysis was used to sort patients into dysexecutive (dMCI, n=22), amnestic (aMCI, n=13), and multi-domain (mMCI, n=51) subtypes. First, principal components analysis (PCA) and linear regression examined relations between clock-drawing errors and neuropsychological test performance independent of MCI subtype. Second, between-group differences were assessed with analysis of variance (ANOVA) where MCI subgroups were compared to normal controls (NC). PCA yielded a 3-group solution. Contrary to expectations, clock-drawing errors loaded with lower performance on naming/lexical retrieval, rather than with executive tests. Regression analyses found increasing clock-drawing errors to command were associated with worse performance only on naming/lexical retrieval tests. ANOVAs revealed no differences in clock-drawing errors between dMCI versus mMCI or aMCI versus NCs. Both the dMCI and mMCI groups generated more clock-drawing errors than the aMCI and NC groups in the command condition. In MCI, language-related skills contribute to clock-drawing impairment. PMID:26397732

Cognitive Reserve as a Protective Factor in Older HIV-Positive Patients at Risk for Cognitive Decline

PubMed Central

Foley, Jessica M.; Ettenhofer, Mark L.; Kim, Michelle S.; Behdin, Nina; Castellon, Steven A.; Hinkin, Charles H.

2013-01-01

The present study examined the impact of cognitive reserve in maintaining intact neuropsychological (NP) function among older HIV-positive individuals, a uniquely at-risk subgroup. Participants included 129 individuals classified by HIV serostatus, age group, and NP impairment. A three-way analysis of variance (ANOVA) followed by a series of within-group ANOVA and multiple regression analyses were conducted to investigate the pattern of cognitive reserve (vs. other protective) influence among groups with varying risks of NP impairment. Results indicated a significant age ×HIV status interaction, with older HIV-positive individuals demonstrating higher cognitive reserve than subgroups with less risk for NP compromise (younger age and/or HIV-negative). Results demonstrated higher cognitive reserve specific to NP-intact older HIV-positive individuals. Within this group, the interaction of younger age and higher cognitive reserve independently contributed to cognitive status when controlling for psychiatric, immunological, and psychosocial protective mechanisms, suggesting the importance of cognitive reserve beyond other protective mechanisms in maintaining optimal NP functioning in those individuals most at risk. Alongside younger age, factors contributing to cognitive reserve (i.e., education and estimated premorbid intelligence) may provide substantial benefit for older HIV-positive adults who are at high risk for NP compromise. PMID:22385375

Mental and Reproductive Health Correlates of Academic Performance among Debre Berhan University Female Students, Ethiopia: The Case of Premenstrual Dysphoric Disorder.

PubMed

Alemu, Sisay Mulugeta; Habtewold, Tesfa Dejenie; Haile, Yohannes Gebreegziabhere

2017-01-01

Globally 3 to 8% of reproductive age women are suffering from premenstrual dysphoric disorder (PMDD). Several mental and reproductive health-related factors cause low academic achievement during university education. However, limited data exist in Ethiopia. The aim of the study was to investigate mental and reproductive health correlates of academic performance. Institution based cross-sectional study was conducted with 667 Debre Berhan University female students from April to June 2015. Academic performance was the outcome variable. Mental and reproductive health characteristics were explanatory variables. Two-way analysis of variance (ANOVA) test of association was applied to examine group difference in academic performance. Among 529 students who participated, 49.3% reported mild premenstrual syndrome (PMS), 36.9% reported moderate/severe PMS, and 13.8% fulfilled PMDD diagnostic criteria. The ANOVA test of association revealed that there was no significant difference in academic performance between students with different level of PMS experience ( F -statistic = 0.08, p value = 0.93). Nevertheless, there was a significant difference in academic performance between students with different length of menses ( F -statistic = 5.15, p value = 0.006). There was no significant association between PMS experience and academic performance, but on the other hand, the length of menses significantly associated with academic performance.

Mentum deformities in Chironomidae communities as indicators of anthropogenic impacts in Swartkops River

NASA Astrophysics Data System (ADS)

Odume, O. N.; Muller, W. J.; Palmer, C. G.; Arimoro, F. O.

Swartkops River is located in Eastern Cape of South Africa and drains a heavily industrialised catchment and has suffered deterioration in water quality due to pollution. Water quality impairment in the Swartkops River has impacted on its biota. Deformities in the mouth parts of larval Chironomidae, particularly of the mentum, represent sub-lethal effects of exposure to pollutants, and were therefore employed as indictors of pollution in the Swartkops River. Chironomid larvae were collected using the South African Scoring System version 5 (SASS5) protocol. A total of 4838 larvae, representing 26 taxa from four sampling sites during four seasons were screened for mentum deformities. The community incidences of mentum deformity were consistently higher than 8% at Sites 2-4, indicating pollution stress in the river. Analysis of variance (ANOVA) conducted on arcsine transformed data revealed that the mean community incidence of mentum deformity was significantly higher (p < 0.05) at Site 3. ANOVA did not reveal statistically significant differences (p > 0.05) between seasons across sites. Severe deformities were consistently higher at Site 3. Strong correlations were found between deformity indices and the concentrations of dissolved oxygen (DO), total inorganic nitrogen (TIN), orthophosphate-phosphorus (PO4-P), electrical conductivity (EC) and turbidity.

An Enhanced Engineering Perspective of Global Climate Systems and Statistical Formulation of Terrestrial CO2 Exchanges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dai, Yuanshun; Baek, Seung H.; Garcia-Diza, Alberto

2012-01-01

This paper designs a comprehensive approach based on the engineering machine/system concept, to model, analyze, and assess the level of CO2 exchange between the atmosphere and terrestrial ecosystems, which is an important factor in understanding changes in global climate. The focus of this article is on spatial patterns and on the correlation between levels of CO2 fluxes and a variety of influencing factors in eco-environments. The engineering/machine concept used is a system protocol that includes the sequential activities of design, test, observe, and model. This concept is applied to explicitly include various influencing factors and interactions associated with CO2 fluxes.more » To formulate effective models of a large and complex climate system, this article introduces a modeling technique that will be referred to as Stochastic Filtering Analysis of Variance (SFANOVA). The CO2 flux data observed from some sites of AmeriFlux are used to illustrate and validate the analysis, prediction and globalization capabilities of the proposed engineering approach and the SF-ANOVA technology. The SF-ANOVA modeling approach was compared to stepwise regression, ridge regression, and neural networks. The comparison indicated that the proposed approach is a valid and effective tool with similar accuracy and less complexity than the other procedures.« less

The heart rate response to nintendo wii boxing in young adults.

PubMed

Bosch, Pamela R; Poloni, Joseph; Thornton, Andrew; Lynskey, James V

2012-06-01

To determine if 30 minutes of Nintendo Wii Sports boxing provides cardiorespiratory benefits and contributes to the daily exercise recommendations for healthy young adults. Twenty healthy 23- to 27-year-olds participated in two sessions to measure maximum heart rate (HR(max)) via a treadmill test and heart rate (HR) response to 30 minutes of Wii Sports boxing. Heart rate in beats per minute (bpm) was measured continuously, and exercise intensity during each minute of play was stratified as a percentage of HR(max). Mixed designs analysis of variance (ANOVA) and Pearson product moment correlations were used to analyze the data. Mean (SD) HR response to boxing was 143 (15) bpm or 77.5% (10.0%) of HR(max). The mean HR response for experienced participants was significantly lower than inexperienced participants, P = .007. The ANOVA revealed a significant interaction between experience and time spent at various intensities, P = .009. Experienced participants spent more time in light to vigorous intensities, inexperienced participants in moderate to very hard intensities. Fitness was not correlated with mean HR response to boxing, P = .49. Thirty minutes of Nintendo Wii Sports boxing provides a moderate to vigorous aerobic response in healthy young adults and can contribute to daily recommendations for physical activity.

Development and psychometric testing of a trans-professional evidence-based practice profile questionnaire.

PubMed

McEvoy, Maureen Patricia; Williams, Marie T; Olds, Timothy Stephen

2010-01-01

Previous survey tools operationalising knowledge, attitudes or beliefs about evidence-based practice (EBP) have shortcomings in content, psychometric properties and target audience. This study developed and psychometrically assessed a self-report trans-professional questionnaire to describe an EBP profile. Sixty-six items were collated from existing EBP questionnaires and administered to 526 academics and students from health and non-health backgrounds. Principal component factor analysis revealed the presence of five factors (Relevance, Terminology, Confidence, Practice and Sympathy). Following expert panel review and pilot testing, the 58-item final questionnaire was disseminated to 105 subjects on two occasions. Test-retest and internal reliability were quantified using intra-class correlation coefficients (ICCs) and Cronbach's alpha, convergent validity against a commonly used EBP questionnaire by Pearson's correlation coefficient and discriminative validity via analysis of variance (ANOVA) based on exposure to EBP training. The final questionnaire demonstrated acceptable internal consistency (Cronbach's alpha 0.96), test-retest reliability (ICCs range 0.77-0.94) and convergent validity (Practice 0.66, Confidence 0.80 and Sympathy 0.54). Three factors (Relevance, Terminology and Confidence) distinguished EBP exposure groups (ANOVA p < 0.001-0.004). The evidence-based practice profile (EBP(2)) questionnaire is a reliable instrument with the ability to discriminate for three factors, between respondents with differing EBP exposures.

Investigation of mechanical, thermal and recycled characteristics of reinforced ternary blends of LDPE/LLDPE/HDPE by ANOVA

NASA Astrophysics Data System (ADS)

Maleki, Mahnam; Farzin, Mahmud; Mosaddegh, Peiman

2018-06-01

In this study, the effect of high density polyethylene (HDPE) and calcium carbonate (CaCO3) addition into constant amount of low density polyethylene/linear low density polyethylene (LDPE/LLDPE) matrix was investigated by using different mechanical and thermal parameters. Then, analysis of variance (ANOVA) was used to investigate the normal distribution of obtained data. Finally, sample containing 50 Phr of HDPE and 7 Phr of CaCO3 microparticles, was determined as optimized sample. The effect of different process parameters such as injecting back pressure, cooling and retention time, on mechanical and thermal properties of optimized sample was investigated as well. Also to investigate the effect of the number of recycling processes on the mechanical and thermal properties, two dominant degradation mechanisms were suggested. The first was the decreasing of chains molecular weight and formation of short length chains and the later was the formation of crosslinks and three dimensional networks. Results indicated that by increasing the number of recycling processes, crystallinity, melting point, modulus, strength at yielding point and toughness in comparison to pristine sample decreased at first and then showed an ascending trend. Elongation at break by increasing of the number of recycling processes, generally increased in comparison with initial sample.

Impact of bleaching agents on water sorption and solubility of resin luting cements.

PubMed

Torabi Ardakani, Mahshid; Atashkar, Berivan; Bagheri, Rafat; Burrow, Michael F

2017-08-01

The aim of the present study was to evaluate the effect of distilled water and home and office bleaching agents on the sorption and solubility of resin luting cements. A total of 18 disc-shaped specimens were prepared from each of four resin cements: G-CEM LinkAce, Panavia F, Rely X Unicem, and seT. Specimens were cured according to the manufacturers' instructions and randomly divided into three groups of six, where they were treated with either an office or home bleaching agent or immersed in distilled water (control). Water sorption and solubility were measured by weighing the specimens before and after immersion and desiccation. Data were analyzed using Pearson correlation coefficient, two-way analysis of variance (ANOVA) and Tukey's test. There was a significant, positive correlation between sorption and solubility. Two-way anova showed significant differences among all resin cements tested for either sorption or solubility. Water sorption and solubility of all cements were affected significantly by office bleaching, and even more by home bleaching agents. Sorption and solubility behavior of the studied cements were highly correlated and significantly affected by applying either office or home bleaching agents; seT showed the highest sorption and solubility, whereas Rely X Unicem revealed the lowest. © 2016 John Wiley & Sons Australia, Ltd.

Local and systemic effect of transfection-reagent formulated DNA vectors on equine melanoma.

PubMed

Mählmann, Kathrin; Feige, Karsten; Juhls, Christiane; Endmann, Anne; Schuberth, Hans-Joachim; Oswald, Detlef; Hellige, Mareu; Doherr, Marcus; Cavalleri, Jessika-M V

2015-05-14

Equine melanoma has a high incidence in grey horses. Xenogenic DNA vaccination may represent a promising therapeutic approach against equine melanoma as it successfully induced an immunological response in other species suffering from melanoma and in healthy horses. In a clinical study, twenty-seven, grey, melanoma-bearing, horses were assigned to three groups (n = 9) and vaccinated on days 1, 22, and 78 with DNA vectors encoding for equine (eq) IL-12 and IL-18 alone or in combination with either human glycoprotein (hgp) 100 or human tyrosinase (htyr). Horses were vaccinated intramuscularly, and one selected melanoma was locally treated by intradermal peritumoral injection. Prior to each injection and on day 120, the sizes of up to nine melanoma lesions per horse were measured by caliper and ultrasound. Specific serum antibodies against hgp100 and htyr were measured using cell based flow-cytometric assays. An Analysis of Variance (ANOVA) for repeated measurements was performed to identify statistically significant influences on the relative tumor volume. For post-hoc testing a Tukey-Kramer Multiple-Comparison Test was performed to compare the relative volumes on the different examination days. An ANOVA for repeated measurements was performed to analyse changes in body temperature over time. A one-way ANOVA was used to evaluate differences in body temperature between the groups. A p-value < 0.05 was considered significant for all statistical tests applied. In all groups, the relative tumor volume decreased significantly to 79.1 ± 26.91% by day 120 (p < 0.0001, Tukey-Kramer Multiple-Comparison Test). Affiliation to treatment group, local treatment and examination modality had no significant influence on the results (ANOVA for repeated measurements). Neither a cellular nor a humoral immune response directed against htyr or hgp100 was detected. Horses had an increased body temperature on the day after vaccination. This is the first clinical report on a systemic effect against equine melanoma following treatment with DNA vectors encoding eqIL12 and eqIL18 and formulated with a transfection reagent. Addition of DNA vectors encoding hgp100 respectively htyr did not potentiate this effect.

Local and systemic effect of transfection-reagent formulated DNA vectors on equine melanoma.

PubMed

Mählmann, Kathrin; Feige, Karsten; Juhls, Christiane; Endmann, Anne; Schuberth, Hans-Joachim; Oswald, Detlef; Hellige, Maren; Doherr, Marcus; Cavalleri, Jessika-M V

2015-06-11

Equine melanoma has a high incidence in grey horses. Xenogenic DNA vaccination may represent a promising therapeutic approach against equine melanoma as it successfully induced an immunological response in other species suffering from melanoma and in healthy horses. In a clinical study, twenty-seven, grey, melanoma-bearing, horses were assigned to three groups (n = 9) and vaccinated on days 1, 22, and 78 with DNA vectors encoding for equine (eq) IL-12 and IL-18 alone or in combination with either human glycoprotein (hgp) 100 or human tyrosinase (htyr). Horses were vaccinated intramuscularly, and one selected melanoma was locally treated by intradermal peritumoral injection. Prior to each injection and on day 120, the sizes of up to nine melanoma lesions per horse were measured by caliper and ultrasound. Specific serum antibodies against hgp100 and htyr were measured using cell based flow-cytometric assays. An Analysis of Variance (ANOVA) for repeated measurements was performed to identify statistically significant influences on the relative tumor volume. For post-hoc testing a Tukey-Kramer Multiple-Comparison Test was performed to compare the relative volumes on the different examination days. An ANOVA for repeated measurements was performed to analyse changes in body temperature over time. A one-way ANOVA was used to evaluate differences in body temperature between the groups. A p-value < 0.05 was considered significant for all statistical tests applied. In all groups, the relative tumor volume decreased significantly to 79.1 ± 26.91% by day 120 (p < 0.0001, Tukey-Kramer Multiple-Comparison Test). Affiliation to treatment group, local treatment and examination modality had no significant influence on the results (ANOVA for repeated measurements). Neither a cellular nor a humoral immune response directed against htyr or hgp100 was detected. Horses had an increased body temperature on the day after vaccination. This is the first clinical report on a systemic effect against equine melanoma following treatment with DNA vectors encoding eqIL12 and eqIL18 and formulated with a transfection reagent. Addition of DNA vectors encoding hgp100 respectively htyr did not potentiate this effect.

Augmented effects of EMG biofeedback interfaced with virtual reality on neuromuscular control and movement coordination during reaching in children with cerebral palsy.

PubMed

Yoo, Ji Won; Lee, Dong Ryul; Cha, Young Joo; You, Sung Hyun

2017-01-01

The purpose of the present study was to compare therapeutic effects of an electromyography (EMG) biofeedback augmented by virtual reality (VR) and EMG biofeedback alone on the triceps and biceps (T:B) muscle activity imbalance and elbow joint movement coordination during a reaching motor taskOBJECTIVE: To compare therapeutic effects of an electromyography (EMG) biofeedback augmented by virtual reality (VR) and EMG biofeedback alone on the triceps and biceps muscle activity imbalance and elbow joint movement coordination during a reaching motor task in normal children and children with spastic cerebral palsy (CP). 18 children with spastic CP (2 females; mean±standard deviation = 9.5 ± 1.96 years) and 8 normal children (3 females; mean ± standard deviation = 9.75 ± 2.55 years) were recruited from a local community center. All children with CP first underwent one intensive session of EMG feedback (30 minutes), followed by one session of the EMG-VR feedback (30 minutes) after a 1-week washout period. Clinical tests included elbow extension range of motion (ROM), biceps muscle strength, and box and block test. EMG triceps and biceps (T:B) muscle activity imbalance and reaching movement acceleration coordination were concurrently determined by EMG and 3-axis accelerometer measurements respectively. Independent t-test and one-way repeated analysis of variance (ANOVA) were performed at p < 0.05. The one-way repeated ANOVA was revealed to be significantly effective in elbow extension ROM (p = 0.01), biceps muscle strength (p = 0.01), and box and block test (p = 0.03). The one-way repeated ANOVA also revealed to be significantly effective in the peak triceps muscle activity (p = 0.01). However, one-way repeated ANOVA produced no statistical significance in the composite 3-dimensional movement acceleration coordination data (p = 0.12). The present study is a first clinical trial that demonstrated the superior benefits of the EMG biofeedback when augmented by virtual reality exercise games in children with spastic CP. The augmented EMG and VR feedback produced better neuromuscular balance control in the elbow joint than the EMG biofeedback alone.

Subtle Increases in BMI within a Healthy Weight Range Still Reduce Womens Employment Chances in the Service Sector

PubMed Central

Timming, Andrew R.; Re, Daniel; Perrett, David I.

2016-01-01

Using mixed design analysis of variance (ANOVA), this paper investigates the effects of a subtle simulated increase in adiposity on women’s employment chances in the service sector. Employing a unique simulation of altering individuals’ BMIs and the literature on “aesthetic labour”, the study suggests that, especially for women, being heavier, but still within a healthy BMI, deleteriously impacts on hireability ratings. The paper explores the gendered dimension of this prejudice by asking whether female employees at the upper end of a healthy BMI range are likely to be viewed more negatively than their overtly overweight male counterparts. The paper concludes by considering the implications of these findings. PMID:27603519

Statistical design of quantitative mass spectrometry-based proteomic experiments.

PubMed

Oberg, Ann L; Vitek, Olga

2009-05-01

We review the fundamental principles of statistical experimental design, and their application to quantitative mass spectrometry-based proteomics. We focus on class comparison using Analysis of Variance (ANOVA), and discuss how randomization, replication and blocking help avoid systematic biases due to the experimental procedure, and help optimize our ability to detect true quantitative changes between groups. We also discuss the issues of pooling multiple biological specimens for a single mass analysis, and calculation of the number of replicates in a future study. When applicable, we emphasize the parallels between designing quantitative proteomic experiments and experiments with gene expression microarrays, and give examples from that area of research. We illustrate the discussion using theoretical considerations, and using real-data examples of profiling of disease.

Blood lead levels and risk factors in pregnant women from Durango, Mexico.

PubMed

La-Llave-León, Osmel; Estrada-Martínez, Sergio; Manuel Salas-Pacheco, José; Peña-Elósegui, Rocío; Duarte-Sustaita, Jaime; Candelas Rangel, Jorge-Luís; García Vargas, Gonzalo

2011-01-01

In this cross-sectional study the authors determined blood lead levels (BLLs) and some risk factors for lead exposure in pregnant women. Two hundred ninety-nine pregnant women receiving medical attention by the Secretary of Health, State of Durango, Mexico, participated in this study between 2007 and 2008. BLLs were evaluated with graphite furnace atomic absorption spectrometry. The authors used Student t test, 1-way analysis of variance (ANOVA), and linear regression as statistical treatments. BLLs ranged from 0.36 to 23.6 μg/dL (mean = 2.79 μg/dL, standard deviation = 2.14). Multivariate analysis showed that the main predictors of BLLs were working in a place where lead is used, using lead glazed pottery, and eating soil.

The Outlier Detection for Ordinal Data Using Scalling Technique of Regression Coefficients

NASA Astrophysics Data System (ADS)

Adnan, Arisman; Sugiarto, Sigit

2017-06-01

The aims of this study is to detect the outliers by using coefficients of Ordinal Logistic Regression (OLR) for the case of k category responses where the score from 1 (the best) to 8 (the worst). We detect them by using the sum of moduli of the ordinal regression coefficients calculated by jackknife technique. This technique is improved by scalling the regression coefficients to their means. R language has been used on a set of ordinal data from reference distribution. Furthermore, we compare this approach by using studentised residual plots of jackknife technique for ANOVA (Analysis of Variance) and OLR. This study shows that the jackknifing technique along with the proper scaling may lead us to reveal outliers in ordinal regression reasonably well.

Effects on Vibration and Surface Roughness in High Speed Micro End-Milling of Inconel 718 with Minimum Quantity Lubrication

NASA Astrophysics Data System (ADS)

Rahman, Mohamed Abd; Yeakub Ali, Mohammad; Saddam Khairuddin, Amir

2017-03-01

This paper presents the study on vibration and surface roughness of Inconel 718 workpiece produced by micro end-milling using Mikrotools Integrated Multi-Process machine tool DT-110 with control parameters; spindle speed (15000 rpm and 30000 rpm), feed rate (2 mm/min and 4 mm/min) and depth of cut (0.10 mm and 0.15mm). The vibration was measured using DYTRAN accelerometer instrument and the average surface roughness Ra was measured using Wyko NT1100. The analysis of variance (ANOVA) by using Design Expert software revealed that feed rate and depth of cut are the most significant factors on vibration meanwhile for average surface roughness, Ra, spindle speed is the most significant factor.

Comparative Assessment of Cutting Inserts and Optimization during Hard Turning: Taguchi-Based Grey Relational Analysis

NASA Astrophysics Data System (ADS)

Venkata Subbaiah, K.; Raju, Ch.; Suresh, Ch.

2017-08-01

The present study aims to compare the conventional cutting inserts with wiper cutting inserts during the hard turning of AISI 4340 steel at different workpiece hardness. Type of insert, hardness, cutting speed, feed, and depth of cut are taken as process parameters. Taguchi’s L18 orthogonal array was used to conduct the experimental tests. Parametric analysis carried in order to know the influence of each process parameter on the three important Surface Roughness Characteristics (Ra, Rz, and Rt) and Material Removal Rate. Taguchi based Grey Relational Analysis (GRA) used to optimize the process parameters for individual response and multi-response outputs. Additionally, the analysis of variance (ANOVA) is also applied to identify the most significant factor.

A SAS(®) macro implementation of a multiple comparison post hoc test for a Kruskal-Wallis analysis.

PubMed

Elliott, Alan C; Hynan, Linda S

2011-04-01

The Kruskal-Wallis (KW) nonparametric analysis of variance is often used instead of a standard one-way ANOVA when data are from a suspected non-normal population. The KW omnibus procedure tests for some differences between groups, but provides no specific post hoc pair wise comparisons. This paper provides a SAS(®) macro implementation of a multiple comparison test based on significant Kruskal-Wallis results from the SAS NPAR1WAY procedure. The implementation is designed for up to 20 groups at a user-specified alpha significance level. A Monte-Carlo simulation compared this nonparametric procedure to commonly used parametric multiple comparison tests. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Influence of different methods of cleaning custom bases on the shear bond strength of indirectly bonded brackets.

PubMed

Kanashiro, Lylian K; Robles-Ruíz, Julissa J; Ciamponi, Ana L; Medeiros, Igor S; Tortamano, André; Paiva, João B

2014-09-01

To determine the influence on shear bond strength and bond failure location of four cleaning methods for orthodontic bracket custom bases. In vitro laboratory study. Eighty bovine teeth were divided at random into four groups. The bracket custom bases were cleaned with different methods: group 1 with methyl methacrylate monomer, group 2 with acetone, group 3 with 50 μm aluminium oxide particles and group 4 with detergent. The brackets were indirectly bonded onto the teeth with the Sondhi Rapid-Set self-curing adhesive. The maximum required shear bond strength to debond the brackets was recorded. The bond failure location was evaluated using the Adhesive Remnant Index (ARI). One-way analysis of variance (ANOVA) analysis (P<0·05) was used to detect significant differences in the bond strength. Kaplan-Meier survival plots and log-rank test were done to compare the survival distribution between the groups. The Kruskal-Wallis test (P<0·05) was used to evaluate the differences in the ARI scores. The mean bond strengths in groups 1, 2, 3 and 4 were 23·7±5·0, 25·3±5·1, 25·6±3·7 and 25·7±4·2 MPa, respectively. There were no significant statistically differences in either the bond strength or the ARI score between the groups. The four custom base-cleaning methods presented the same efficiencies on indirect bond of the brackets; thus, practitioners can choose the method that works best for them. © 2014 British Orthodontic Society.

Validating internal controls for quantitative plant gene expression studies

PubMed Central

Brunner, Amy M; Yakovlev, Igor A; Strauss, Steven H

2004-01-01

Background Real-time reverse transcription PCR (RT-PCR) has greatly improved the ease and sensitivity of quantitative gene expression studies. However, accurate measurement of gene expression with this method relies on the choice of a valid reference for data normalization. Studies rarely verify that gene expression levels for reference genes are adequately consistent among the samples used, nor compare alternative genes to assess which are most reliable for the experimental conditions analyzed. Results Using real-time RT-PCR to study the expression of 10 poplar (genus Populus) housekeeping genes, we demonstrate a simple method for determining the degree of stability of gene expression over a set of experimental conditions. Based on a traditional method for analyzing the stability of varieties in plant breeding, it defines measures of gene expression stability from analysis of variance (ANOVA) and linear regression. We found that the potential internal control genes differed widely in their expression stability over the different tissues, developmental stages and environmental conditions studied. Conclusion Our results support that quantitative comparisons of candidate reference genes are an important part of real-time RT-PCR studies that seek to precisely evaluate variation in gene expression. The method we demonstrated facilitates statistical and graphical evaluation of gene expression stability. Selection of the best reference gene for a given set of experimental conditions should enable detection of biologically significant changes in gene expression that are too small to be revealed by less precise methods, or when highly variable reference genes are unknowingly used in real-time RT-PCR experiments. PMID:15317655

Whole-animal metabolic rate is a repeatable trait: a meta-analysis.

PubMed

Nespolo, Roberto F; Franco, Marcela

2007-06-01

Repeatability studies are gaining considerable interest among physiological ecologists, particularly in traits affected by high environmental/residual variance, such as whole-animal metabolic rate (MR). The original definition of repeatability, known as the intraclass correlation coefficient, is computed from the components of variance obtained in a one-way ANOVA on several individuals from which two or more measurements are performed. An alternative estimation of repeatability, popular among physiological ecologists, is the Pearson product-moment correlation between two consecutive measurements. However, despite the more than 30 studies reporting repeatability of MR, so far there is not a definite synthesis indicating: (1) whether repeatability changes in different types of animals; (2) whether some kinds of metabolism are more repeatable than others; and most important, (3) whether metabolic rate is significantly repeatable. We performed a meta-analysis to address these questions, as well as to explore the historical trend in repeatability studies. Our results show that metabolic rate is significantly repeatable and its effect size is not statistically affected by any of the mentioned factors (i.e. repeatability of MR does not change in different species, type of metabolism, time between measurements, and number of individuals). The cumulative meta-analysis revealed that repeatability studies in MR have already reached an asymptotical effect size with no further change either in its magnitude and/or variance (i.e. additional studies will not contribute significantly to the estimator). There was no evidence of strong publication bias.

Assessment of the Relationship between Spiritual and Social Health and the Self-Care Ability of Elderly People Referred to Community Health Centers.

PubMed

Mohammadi, Mahboobeh; Alavi, Mousa; Bahrami, Masoud; Zandieh, Zahra

2017-01-01

Promotion of self-care ability among older people is an essential means to help maintain and improve their health. However, the role of spiritual and social health has not yet been considered in detail in the context of self-care ability among elderly. The aim of this study was to assess the relationship between spiritual and social health and self-care ability of older people referred to community health centers in Isfahan. In this cross-sectional correlation study, 200 people, aged 60 years and older, referred to healthcare centers in 2016 were recruited through convenience sampling method. Data were collected by four-part tool comprising of: (a) demographics, (b) Ellison and Palotzin's spiritual well-being scale, (c) Kees's "social health" scale, and (d) self-care ability scale for the elderly by Soderhamn's; data were analyzed by descriptive and inferential (independent t -test, analysis of variance - ANOVA, Pearson's coefficient tests, and multiple regression analysis) statistics by SPSS16 software. Findings showed that the entered predictor variables were accounted for 41% of total variance ( R 2 ) of the two self-care ability in the model ( p < 0.001, F 3, 199 = 46.02). Two out of the three predictor variables including religious well-being and social health, significantly predicted the self-care ability of older people. The results of this study emphasized on the relationship between spiritual and social health of the elderly people and their ability to self-care. Therefore, it would be recommended to keep the focus of the service resources towards improving social and spiritual health to improve self-care ability in elderly people.

Why Do Women Have More Children Than They Want? Understanding Differences in Women’s Ideal and Actual Family Size in a Natural Fertility Population

PubMed Central

McAllister, Lisa; Gurven, Michael; Kaplan, Hillard; Stieglitz, Jonathan

2013-01-01

Objectives We develop and test a conceptual model of factors influencing women’s ideal family size (IFS) in a natural fertility population, the Tsimane of Bolivia. The model posits affects of socioecology, reproductive history, maternal condition, and men’s IFS. We test three hypotheses for why women may exceed their IFS despite experiencing socioeconomic development: (H1) limited autonomy; (H2) improved maternal condition; and (H3) low returns on investments in embodied capital. Methods Women’s reproductive histories and prospective fertility data were collected from 2002 to 2008 (n = 305 women). Semistructured interviews were conducted with Tsimane women to study the perceived value of parental investment (n = 76). Multiple regression, t-tests, and analysis of variance (ANOVA) are used to test model predictions. Results Women’s IFS is predicted by their socioecology, reproductive history, maternal condition, and husband’s IFS. Hypotheses 2 and 3 are supported. Couples residing near town have smaller IFS (women = 3.75 ± 1.64; men = 3.87 ± 2.64) and less variance in IFS. However, the degree fertility exceeds IFS is inversely correlated with distance to town (Partial r = −0.189, df = 156, P = 0.018). Women living near town have greater maternal condition but 64% value traditional skills over formal schooling and 88% believe living in town is unfeasible. Conclusions While reduced IFS is evident with socioeconomic development, fertility decline may not immediately follow. When perceived benefits of investment in novel forms of embodied capital are low, and somatic wealth and large kin networks persist as important components of fitness, fertility may remain high and increase if maternal condition improves. PMID:22987773

The relationship between emotional intelligence and job stress in the faculty of medicine in Isfahan University of Medical Sciences

PubMed Central

YAMANI, NIKOO; SHAHABI, MARYAM; HAGHANI, FARIBA

2014-01-01

Introduction: health care professionals especially clinicians, undergo lots of job stress (JS). Emotional intelligence (EI) is among the variables that appear to be associated with stress. It is also included among the ways adopted by the individuals in order to resist JS in the workplace. Thus, this study aims to investigate the relationship between EI and JS in the faculty members of Isfahan University of Medical Sciences (IUMS). Methods: This was a correlational study performed on 202 faculty members of IUMS. The data was gathered through two valid and reliable questionnaires (Bradberry EI questionnaire and JS questionnaire), being analyzed by SPSS software using descriptive statistics, Pearson correlation coefficient, t-test, analysis of variance (ANOVA) and linear regression analysis (α=0.05). Results: 142 individuals (70.30%) filled out the questionnaires. 75% of the respondents were male and 98% were married. There was an inverse correlation between the total score of EI and the level of JS (r=-0.235, p=0.005). Moreover, among the factors of EI, self-awareness and self-management scores had significant inverse relationship with the level of JS. Linear regression analysis showed that the EI factors explained approximately 7% of the variance of JS levels of the teachers. Conclusions: Individuals with high EI have less JS. Since the EI can be taught, it can be expected that the JS of faculty members can be reduced through training them on emotional intelligence. Therefore, it is recommended that short-term training courses be scheduled and designed based on the concepts of EI for teachers, particularly clinicians. PMID:25512914

The Box-Cox power transformation on nursing sensitive indicators: Does it matter if structural effects are omitted during the estimation of the transformation parameter?

PubMed Central

2011-01-01

Background Many nursing and health related research studies have continuous outcome measures that are inherently non-normal in distribution. The Box-Cox transformation provides a powerful tool for developing a parsimonious model for data representation and interpretation when the distribution of the dependent variable, or outcome measure, of interest deviates from the normal distribution. The objectives of this study was to contrast the effect of obtaining the Box-Cox power transformation parameter and subsequent analysis of variance with or without a priori knowledge of predictor variables under the classic linear or linear mixed model settings. Methods Simulation data from a 3 × 4 factorial treatments design, along with the Patient Falls and Patient Injury Falls from the National Database of Nursing Quality Indicators (NDNQI®) for the 3rd quarter of 2007 from a convenience sample of over one thousand US hospitals were analyzed. The effect of the nonlinear monotonic transformation was contrasted in two ways: a) estimating the transformation parameter along with factors with potential structural effects, and b) estimating the transformation parameter first and then conducting analysis of variance for the structural effect. Results Linear model ANOVA with Monte Carlo simulation and mixed models with correlated error terms with NDNQI examples showed no substantial differences on statistical tests for structural effects if the factors with structural effects were omitted during the estimation of the transformation parameter. Conclusions The Box-Cox power transformation can still be an effective tool for validating statistical inferences with large observational, cross-sectional, and hierarchical or repeated measure studies under the linear or the mixed model settings without prior knowledge of all the factors with potential structural effects. PMID:21854614

Metacognition in schizophrenia: the relationship of mastery to coping, insight, self-esteem, social anxiety, and various facets of neurocognition.

PubMed

Lysaker, Paul H; Erickson, Molly; Ringer, Jamie; Buck, Kelly D; Semerari, Antonio; Carcione, Antonino; Dimaggio, Giancarlo

2011-11-01

OBJECTIVES. Deficits in metacognition, or the ability to think about thinking, are common in schizophrenia and associated with functional impairment. Unknown are what elements of function are affected by what aspects of metacognition. DESIGN. This study explored whether participants with differing capacities for Mastery, a domain of metacognition that reflects the ability to use knowledge about mental states to respond to psychological challenges, had difficulties in different elements of daily function. METHODS. Participants were 98 adults with schizophrenia or schizoaffective disorder in a non-acute phase, classified into three groups on the basis of ratings of their capacity for metacognitive Mastery using the Metacognitive Assessment Scale: low Mastery (those unable to plausibly represent psychological challenges), Intermediate Mastery (those able to plausibly represent psychological problems but cope primarily through passive measures or avoidance), and high Mastery (those able to cope with plausible problems through cognitive means). Participants completed assessments of coping preference, insight, self-esteem, and anxiety. RESULTS. Multivariate Analysis of Variance (MANOVA) and Analysis of Variance (ANOVA) revealed that the high-Mastery group had a greater preference for coping with stressors by thinking and talking about them, and greater insight than all other groups, and higher levels of feeling accepted by peers than the intermediate-Mastery group. The intermediate-Mastery group reported higher levels of resignation when facing stressors and more social phobia than the other two groups. These findings of Mastery group differences in self-esteem and anxiety persisted when neurocognition was controlled for in an Analysis of Covariance (ANCOVA). CONCLUSIONS. Mastery appears linked to coping preference, insight, self-esteem, and anxiety in a generally non-linear manner. ©2011 The British Psychological Society.

Medical specialty preferences in early medical school training in Canada

PubMed Central

McLean, Laurie; McInnes, Matthew D.F.

2017-01-01

Objectives To understand what medical students consider when choosing their specialty, prior to significant clinical exposure to develop strategies to provide adequate career counseling. Methods A cross-sectional study was performed by distributing optional questionnaires to 165 first-year medical students at the University of Ottawa in their first month of training with a sample yield of 54.5% (n=90).  Descriptive statistics, analysis of variance, Spearman's rank correlation, Cronbach's alpha coefficient, Kaiser-Meyer-Olkin Measure, and exploratory factor analyses were used to analyze the anonymized results. Results “Job satisfaction”, “lifestyle following training” and, “impact on the patient” were the three highest rated considerations when choosing a specialty.  Fifty-two and seventeen percent (n=24) and 57.89% (n=22) of males and females ranked non-surgical specialties as their top choice. Student confidence in their specialty preferences was moderate, meaning their preference could likely change (mean=2.40/5.00, SD=1.23). ANOVA showed no significant differences between confidence and population size (F(2,86)=0.290, p=0.75) or marital status (F(2,85)=0.354, p=0.70) in both genders combined. Five underlying factors that explained 44.32% of the total variance were identified. Five themes were identified to enhance career counseling. Conclusions Medical students in their first month of training have already considered their specialty preferences, despite limited exposure. However, students are not fixed in their specialty preference. Our findings further support previous results but expand what students consider when choosing their specialty early in their training. Medical educators and administrators who recognize and understand the importance of these considerations may further enhance career counseling and medical education curricula.  PMID:29140793

Does a Rater's Professional Background Influence Communication Skills Assessment?

PubMed

Artemiou, Elpida; Hecker, Kent G; Adams, Cindy L; Coe, Jason B

2015-01-01

There is increasing pressure in veterinary education to teach and assess communication skills, with the Objective Structured Clinical Examination (OSCE) being the most common assessment method. Previous research reveals that raters are a large source of variance in OSCEs. This study focused on examining the effect of raters' professional background as a source of variance when assessing students' communication skills. Twenty-three raters were categorized according to their professional background: clinical sciences (n=11), basic sciences (n=4), clinical communication (n=5), or hospital administrator/clinical skills technicians (n=3). Raters from each professional background were assigned to the same station and assessed the same students during two four-station OSCEs. Students were in year 2 of their pre-clinical program. Repeated-measures ANOVA results showed that OSCE scores awarded by the rater groups differed significantly: (F(matched_station_1) [2,91]=6.97, p=.002), (F(matched_station_2) [3,90]=13.95, p=.001), (F(matched_station_3) [3,90]=8.76, p=.001), and ((Fmatched_station_4) [2,91]=30.60, p=.001). A significant time effect between the two OSCEs was calculated for matched stations 1, 2, and 4, indicating improved student performances. Raters with a clinical communication skills background assigned scores that were significantly lower compared to the other rater groups. Analysis of written feedback provided by the clinical sciences raters showed that they were influenced by the students' clinical knowledge of the case and that they did not rely solely on the communication checklist items. This study shows that it is important to consider rater background both in recruitment and training programs for communication skills' assessment.

Evaluation of three lidar scanning strategies for turbulence measurements

NASA Astrophysics Data System (ADS)

Newman, J. F.; Klein, P. M.; Wharton, S.; Sathe, A.; Bonin, T. A.; Chilson, P. B.; Muschinski, A.

2015-11-01

Several errors occur when a traditional Doppler-beam swinging (DBS) or velocity-azimuth display (VAD) strategy is used to measure turbulence with a lidar. To mitigate some of these errors, a scanning strategy was recently developed which employs six beam positions to independently estimate the u, v, and w velocity variances and covariances. In order to assess the ability of these different scanning techniques to measure turbulence, a Halo scanning lidar, WindCube v2 pulsed lidar and ZephIR continuous wave lidar were deployed at field sites in Oklahoma and Colorado with collocated sonic anemometers. Results indicate that the six-beam strategy mitigates some of the errors caused by VAD and DBS scans, but the strategy is strongly affected by errors in the variance measured at the different beam positions. The ZephIR and WindCube lidars overestimated horizontal variance values by over 60 % under unstable conditions as a result of variance contamination, where additional variance components contaminate the true value of the variance. A correction method was developed for the WindCube lidar that uses variance calculated from the vertical beam position to reduce variance contamination in the u and v variance components. The correction method reduced WindCube variance estimates by over 20 % at both the Oklahoma and Colorado sites under unstable conditions, when variance contamination is largest. This correction method can be easily applied to other lidars that contain a vertical beam position and is a promising method for accurately estimating turbulence with commercially available lidars.

Evaluation of three lidar scanning strategies for turbulence measurements

NASA Astrophysics Data System (ADS)

Newman, Jennifer F.; Klein, Petra M.; Wharton, Sonia; Sathe, Ameya; Bonin, Timothy A.; Chilson, Phillip B.; Muschinski, Andreas

2016-05-01

Several errors occur when a traditional Doppler beam swinging (DBS) or velocity-azimuth display (VAD) strategy is used to measure turbulence with a lidar. To mitigate some of these errors, a scanning strategy was recently developed which employs six beam positions to independently estimate the u, v, and w velocity variances and covariances. In order to assess the ability of these different scanning techniques to measure turbulence, a Halo scanning lidar, WindCube v2 pulsed lidar, and ZephIR continuous wave lidar were deployed at field sites in Oklahoma and Colorado with collocated sonic anemometers.Results indicate that the six-beam strategy mitigates some of the errors caused by VAD and DBS scans, but the strategy is strongly affected by errors in the variance measured at the different beam positions. The ZephIR and WindCube lidars overestimated horizontal variance values by over 60 % under unstable conditions as a result of variance contamination, where additional variance components contaminate the true value of the variance. A correction method was developed for the WindCube lidar that uses variance calculated from the vertical beam position to reduce variance contamination in the u and v variance components. The correction method reduced WindCube variance estimates by over 20 % at both the Oklahoma and Colorado sites under unstable conditions, when variance contamination is largest. This correction method can be easily applied to other lidars that contain a vertical beam position and is a promising method for accurately estimating turbulence with commercially available lidars.

Effects of a High Magnetic Field on the Microstructure of Ni-Based Single-Crystal Superalloys During Directional Solidification

NASA Astrophysics Data System (ADS)

Xuan, Weidong; Lan, Jian; Liu, Huan; Li, Chuanjun; Wang, Jiang; Ren, Weili; Zhong, Yunbo; Li, Xi; Ren, Zhongming

2017-08-01

High magnetic fields are widely used to improve the microstructure and properties of materials during the solidification process. During the preparation of single-crystal turbine blades, the microstructure of the superalloy is the main factor that determines its mechanical properties. In this work, the effects of a high magnetic field on the microstructure of Ni-based single-crystal superalloys PWA1483 and CMSX-4 during directional solidification were investigated experimentally. The results showed that the magnetic field modified the primary dendrite arm spacing, γ' phase size, and microsegregation of the superalloys. In addition, the size and volume fractions of γ/ γ' eutectic and the microporosity were decreased in a high magnetic field. Analysis of variance (ANOVA) results showed that the effect of a high magnetic field on the microstructure during directional solidification was significant ( p < 0.05). Based on both experimental results and theoretical analysis, the modification of microstructure was attributed to thermoelectric magnetic convection occurring in the interdendritic regions under a high magnetic field. The present work provides a new method to optimize the microstructure of Ni-based single-crystal superalloy blades by applying a high magnetic field.

Concept of Aided Phytostabilization of Contaminated Soils in Postindustrial Areas

PubMed Central

Koda, Eugeniusz; Bilgin, Ayla; Vaverková, Mgdalena D.

2017-01-01

The experiment was carried out in order to evaluate the effects of trace element immobilizing soil amendments, i.e., chalcedonite, dolomite, halloysite, and diatomite on the chemical characteristics of soil contaminated with Cr and the uptake of metals by plants. The study utilized analysis of variance (ANOVA), principal component analysis (PCA) and Factor Analysis (FA). The content of trace elements in plants, pseudo-total and extracted by 0.01 M CaCl2, were determined using the method of spectrophotometry. All of the investigated element contents in the tested parts of Indian mustard (Brassica juncea L.) differed significantly in the case of applying amendments to the soil, as well as Cr contamination. The greatest average above-ground biomass was observed when halloysite and dolomite were amended to the soil. Halloysite caused significant increases of Cr concentrations in the roots. The obtained values of bioconcentration and translocation factors observed for halloysite treatment indicate the effectiveness of using Indian mustard in phytostabilization techniques. The addition of diatomite significantly increased soil pH. Halloysite and chalcedonite were shown to be the most effective and decreased the average Cr, Cu and Zn contents in soil. PMID:29295511

Assessment the impact of samplers change on the uncertainty related to geothermalwater sampling

NASA Astrophysics Data System (ADS)

Wątor, Katarzyna; Mika, Anna; Sekuła, Klaudia; Kmiecik, Ewa

2018-02-01

The aim of this study is to assess the impact of samplers change on the uncertainty associated with the process of the geothermal water sampling. The study was carried out on geothermal water exploited in Podhale region, southern Poland (Małopolska province). To estimate the uncertainty associated with sampling the results of determinations of metasilicic acid (H2SiO3) in normal and duplicate samples collected in two series were used (in each series the samples were collected by qualified sampler). Chemical analyses were performed using ICP-OES method in the certified Hydrogeochemical Laboratory of the Hydrogeology and Engineering Geology Department at the AGH University of Science and Technology in Krakow (Certificate of Polish Centre for Accreditation No. AB 1050). To evaluate the uncertainty arising from sampling the empirical approach was implemented, based on double analysis of normal and duplicate samples taken from the same well in the series of testing. The analyses of the results were done using ROBAN software based on technique of robust statistics analysis of variance (rANOVA). Conducted research proved that in the case of qualified and experienced samplers uncertainty connected with the sampling can be reduced what results in small measurement uncertainty.

Typical balance exercises or exergames for balance improvement?

PubMed

Gioftsidou, Asimenia; Vernadakis, Nikolaos; Malliou, Paraskevi; Batzios, Stavros; Sofokleous, Polina; Antoniou, Panagiotis; Kouli, Olga; Tsapralis, Kyriakos; Godolias, George

2013-01-01

Balance training is an effective intervention to improve static postural sway and balance. The purpose of the present study was to investigate the effectiveness of the Nintendo Wii Fit Plus exercises for improving balance ability in healthy collegiate students in comparison with a typical balance training program. Forty students were randomly divided into two groups, a traditional (T group) and a Nintendo Wii group (W group) performed an 8 week balance program. The "W group" used the interactive games as a training method, while the "T group" used an exercise program with mini trampoline and inflatable discs (BOSU). Pre and Post-training participants completed balance assessments. Two-way repeated measures analyses of variance (ANOVAs) were conducted to determine the effect of training program. Analysis of the data illustrated that both training program groups demonstrated an improvement in Total, Anterior-posterior and Medial Lateral Stability Index scores for both limbs. Only at the test performed in the balance board with anterior-posterior motion, the improvement in balance ability was greater in the "T group" than the "W group", when the assessment was performed post-training (p=0.023). Findings support the effectiveness of using the Nintendo Wii gaming console as a balance training intervention tool.

Potential implications of mine dusts on human health: A case study of Mukula Mine, Limpopo Province, South Africa

PubMed Central

Momoh, Abuh; E. Mhlongo, Sphiwe; Abiodun, Olukoga; Muzerengi, Confidence; Mudanalwo, Matamela

2013-01-01

Objective: The purpose of this study was to estimate the levels of Suspended Particulate Matter (SPM) in ambient air within Mukula mine and the potential risks to mineworkers and inhabitants of the adjoining Mukula community’s health. Methods : An SPM was used to measure the levels of particulate matter (PM10) in and around the mining site. One-way Analysis of Variance (ANOVA) was used to determine significance level of PM10 in ambient air. Results: Suspended particulate matter in the air ranged from 60.25 to 1820.45 µg/m3. The lowest value of SPM was more than four times the required World Health Organisation’s allowable level in ambient air, which the mine workers and locals would be inhaling. Conclusion: Continuous inhalation of mine dusts by mine workers and locals could result in pulmonary fibrosis, silicosis and lung cancer. The findings from this study support the need to have in place the necessary control measures that will drastically reduce SPM in the air. Such measure includes wet drilling and blasting, sprinkling of water on the mine roads and planting of vegetation around the mines and neighbouring communities. PMID:24550971

In vitro remineralization of hybrid layers using biomimetic analogs*

PubMed Central

Lin, Hui-ping; Lin, Jun; Li, Juan; Xu, Jing-hong; Mehl, Christian

2016-01-01

Resin-dentin bond degradation is a major cause of restoration failures. The major aim of the current study was to evaluate the impact of a remineralization medium on collagen matrices of hybrid layers of three different adhesive resins using nanotechnology methods. Coronal dentin surfaces were prepared from freshly extracted premolars and bonded to composite resin using three adhesive resins (FluoroBond II, Xeno-III-Bond, and iBond). From each tooth, two central slabs were selected for the study. The slabs used as controls were immersed in a simulated body fluid (SBF). The experimental slabs were immersed in a Portland cement-based remineralization medium that contained two biomimetic analogs (biomineralization medium (BRM)). Eight slabs per group were retrieved after 1, 2, 3, and 4 months, respectively and immersed in Rhodamine B for 24 h. Confocal laser scanning microscopy was used to evaluate the permeability of hybrid layers to Rhodamine B. Data were analyzed by analysis of variance (ANOVA) and Tukey’s honest significant difference (HSD) tests. After four months, all BRM specimens exhibited a significantly smaller fluorescent area than SBF specimens, indicating a remineralization of the hybrid layer (P≤0.05). A clinically applicable biomimetic remineralization delivery system could potentially slow down bond degradation. PMID:27819133

In vitro remineralization of hybrid layers using biomimetic analogs.

PubMed

Lin, Hui-Ping; Lin, Jun; Li, Juan; Xu, Jing-Hong; Mehl, Christian

Resin-dentin bond degradation is a major cause of restoration failures. The major aim of the current study was to evaluate the impact of a remineralization medium on collagen matrices of hybrid layers of three different adhesive resins using nanotechnology methods. Coronal dentin surfaces were prepared from freshly extracted premolars and bonded to composite resin using three adhesive resins (FluoroBond II, Xeno-III-Bond, and iBond). From each tooth, two central slabs were selected for the study. The slabs used as controls were immersed in a simulated body fluid (SBF). The experimental slabs were immersed in a Portland cement-based remineralization medium that contained two biomimetic analogs (biomineralization medium (BRM)). Eight slabs per group were retrieved after 1, 2, 3, and 4 months, respectively and immersed in Rhodamine B for 24 h. Confocal laser scanning microscopy was used to evaluate the permeability of hybrid layers to Rhodamine B. Data were analyzed by analysis of variance (ANOVA) and Tukey's honest significant difference (HSD) tests. After four months, all BRM specimens exhibited a significantly smaller fluorescent area than SBF specimens, indicating a remineralization of the hybrid layer (P≤0.05). A clinically applicable biomimetic remineralization delivery system could potentially slow down bond degradation.

Antimicrobial Effect of Jasminum grandiflorum L. and Hibiscus rosa-sinensis L. Extracts Against Pathogenic Oral Microorganisms--An In Vitro Comparative Study.

PubMed

Nagarajappa, Ramesh; Batra, Mehak; Sharda, Archana J; Asawa, Kailash; Sanadhya, Sudhanshu; Daryani, Hemasha; Ramesh, Gayathri

2015-01-01

To assess and compare the antimicrobial potential and determine the minimum inhibitory concentration (MIC) of Jasminum grandiflorum and Hibiscus rosa-sinensis extracts as potential anti-pathogenic agents in dental caries. Aqueous and ethanol (cold and hot) extracts prepared from leaves of Jasminum grandiflorum and Hibiscus rosa-sinensis were screened for in vitro antimicrobial activity against Streptococcus mutans and Lactobacillus acidophilus using the agar well diffusion method. The lowest concentration of every extract considered as the minimum inhibitory concentration (MIC) was determined for both test organisms. Statistical analysis was performed with one-way analysis of variance (ANOVA). At lower concentrations, hot ethanol Jasminum grandiflorum (10 μg/ml) and Hibiscus rosa-sinensis (25 μg/ml) extracts were found to have statistically significant (P≤0.05) antimicrobial activity against S. mutans and L. acidophilus with MIC values of 6.25 μg/ml and 25 μg/ml, respectively. A proportional increase in their antimicrobial activity (zone of inhibition) was observed. Both extracts were found to be antimicrobially active and contain compounds with therapeutic potential. Nevertheless, clinical trials on the effect of these plants are essential before advocating large-scale therapy.

Effects of Huangqi and bear bile on recurrent parotitis in children: a new clinical approach*

PubMed Central

Ruan, Wen-hua; Huang, Mei-li; He, Xiao-lei; Zhang, Feng; Tao, Hai-biao

2013-01-01

Objective: To evaluate the pharmacological effects of traditional Chinese medicine, bear bile capsule and Huangqi granule, on recurrent parotitis in children. Methods: In this prospective, controlled, and randomized study, a total of 151 young children were divided into three groups: Group A included massaging the children’s parotid region and melting vitamin C in their mouth daily; Group B included swallowing bear bile capsule and Huangqi granule daily; and Group C included massages and vitamin C as prescribed in Group A, and traditional Chinese medicine as prescribed in Group B. Children were treated individually for one month and then a follow-up study was conducted for 1 to 3.5 years. Analysis of variance (ANOVA) and Ridit analysis were employed for statistical analysis. Results: The recurrence rate decreased in every group, but was significantly more in Groups B and C when compared to Group A. The recurrences significantly decreased (P<0.01) in Group B and their recovery rate was as high as 63%, significantly better than those of the other groups (P<0.01). Conclusions: Huangqi and bear bile could be a novel clinical approach for treating recurrent parotitis in children. PMID:23463769

Optimization of Acid Orange 7 Degradation in Heterogeneous Fenton-like Reaction Using Fe3-xCoxO4 Catalyst

NASA Astrophysics Data System (ADS)

Ibrahim, M. Z.; Alrozi, R.; Zubir, N. A.; Bashah, N. A.; Ali, S. A. Md; Ibrahim, N.

2018-05-01

The oxidation process such as heterogeneous Fenton and/or Fenton-like reactions is considered as an effective and efficient method for treatment of dye degradation. In this study, the degradation of Acid Orange 7 (AO7) was investigated by using Fe3-xCoxO4 as a heterogeneous Fenton-like catalyst. Response surface methodology (RSM) was used to optimize the operational parameters condition and the interaction of two or more parameters. The parameter studies were catalyst dosage (X1 ), pH (X2 ) and H2O2 concentration (X3 ) towards AO7 degradation. Based on analysis of variance (ANOVA), the derived quadratic polynomial model was significant whereby the predicted values matched the experimental values with regression coefficient of R2 = 0.9399. The optimum condition for AO7 degradation was obtained at catalyst dosage of 0.84 g/L, pH of 3 and H2O2 concentration of 46.70 mM which resulted in 86.30% removal of AO7 dye. These findings present new insights into the influence of operational parameters in the heterogeneous Fenton-like oxidation of AO7 using Fe3-xCoxO4 catalyst.

Statistical modeling of an integrated boiler for coal fired thermal power plant.

PubMed

Chandrasekharan, Sreepradha; Panda, Rames Chandra; Swaminathan, Bhuvaneswari Natrajan

2017-06-01

The coal fired thermal power plants plays major role in the power production in the world as they are available in abundance. Many of the existing power plants are based on the subcritical technology which can produce power with the efficiency of around 33%. But the newer plants are built on either supercritical or ultra-supercritical technology whose efficiency can be up to 50%. Main objective of the work is to enhance the efficiency of the existing subcritical power plants to compensate for the increasing demand. For achieving the objective, the statistical modeling of the boiler units such as economizer, drum and the superheater are initially carried out. The effectiveness of the developed models is tested using analysis methods like R 2 analysis and ANOVA (Analysis of Variance). The dependability of the process variable (temperature) on different manipulated variables is analyzed in the paper. Validations of the model are provided with their error analysis. Response surface methodology (RSM) supported by DOE (design of experiments) are implemented to optimize the operating parameters. Individual models along with the integrated model are used to study and design the predictive control of the coal-fired thermal power plant.

Metabolic discrimination of sea buckthorn from different Hippophaë species by 1H NMR based metabolomics.

PubMed

Liu, Yue; Fan, Gang; Zhang, Jing; Zhang, Yi; Li, Jingjian; Xiong, Chao; Zhang, Qi; Li, Xiaodong; Lai, Xianrong

2017-05-08

Sea buckthorn (Hippophaë; Elaeagnaceae) berries are widely consumed in traditional folk medicines, nutraceuticals, and as a source of food. The growing demand of sea buckthorn berries and morphological similarity of Hippophaë species leads to confusions, which might cause misidentification of plants used in natural products. Detailed information and comparison of the complete set of metabolites of different Hippophaë species are critical for their objective identification and quality control. Herein, the variation among seven species and seven subspecies of Hippophaë was studied using proton nuclear magnetic resonance ( 1 H NMR) metabolomics combined with multivariate data analysis, and the important metabolites were quantified by quantitative 1 H NMR (qNMR) method. The results showed that different Hippophaë species can be clearly discriminated and the important interspecific discriminators, including organic acids, L-quebrachitol, and carbohydrates were identified. Statistical differences were found among most of the Hippophaë species and subspecies at the content levels of the aforementioned interspecific discriminators via qNMR and one-way analysis of variance (ANOVA) test. These findings demonstrated that 1 H NMR-based metabolomics is an applicable and effective approach for simultaneous metabolic profiling, species differentiation and quality assessment.

Calcium antagonistic activity of Bacopa monniera in guinea-pig trachea

PubMed Central

Channa, Shabana; Dar, Ahsana

2012-01-01

Objective: To demonstrate the calcium antagonistic property of ethanol extract of Bacopa monniera in guinea-pig trachea. Materials and Methods: The dose response curves of CaCl2 (1 × 10-5 to 1 × 10-1 M) were constructed in the absence and presence of ethanol extract of Bacopa monniera (100, 500 and 700 μg/ml) or nifedipine (1 × 10-6 M) in guinea-pig trachea in calcium free high K+-MOPS-PSS (3-(N-morpholino)-propanesulphonic acid physiological salt solution). The data was analyzed by ANOVA followed by least significant difference test or by Student's ‘t’ test for unequal variance when appropriate. A probability of at least P < 0.05 was considered statistically significant. Results: The plant extract (500 and 700 μg/ml) significantly (P < 0.05) depressed and shifted the calcium concentration-response curves (1 × 10-3- 1 × 10-1 M) to rightward similar to that of nifedipine. Conclusions: Bacopa monniera extract exhibited calcium channel blocking activity in guinea-pig tracheal smooth muscles that may rationalize its relaxant action on guinea-pig trachea and its traditional use in respiratory disorders. PMID:23087517

Multiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory

NASA Astrophysics Data System (ADS)

Khanna, Rajesh; Kumar, Anish; Garg, Mohinder Pal; Singh, Ajit; Sharma, Neeraj

2015-12-01

Electric discharge drill machine (EDDM) is a spark erosion process to produce micro-holes in conductive materials. This process is widely used in aerospace, medical, dental and automobile industries. As for the performance evaluation of the electric discharge drilling machine, it is very necessary to study the process parameters of machine tool. In this research paper, a brass rod 2 mm diameter was selected as a tool electrode. The experiments generate output responses such as tool wear rate (TWR). The best parameters such as pulse on-time, pulse off-time and water pressure were studied for best machining characteristics. This investigation presents the use of Taguchi approach for better TWR in drilling of Al-7075. A plan of experiments, based on L27 Taguchi design method, was selected for drilling of material. Analysis of variance (ANOVA) shows the percentage contribution of the control factor in the machining of Al-7075 in EDDM. The optimal combination levels and the significant drilling parameters on TWR were obtained. The optimization results showed that the combination of maximum pulse on-time and minimum pulse off-time gives maximum MRR.