Determining Sample Sizes for Precise Contrast Analysis with Heterogeneous Variances

ERIC Educational Resources Information Center

Jan, Show-Li; Shieh, Gwowen

2014-01-01

The analysis of variance (ANOVA) is one of the most frequently used statistical analyses in practical applications. Accordingly, the single and multiple comparison procedures are frequently applied to assess the differences among mean effects. However, the underlying assumption of homogeneous variances may not always be tenable. This study…

A Hybrid One-Way ANOVA Approach for the Robust and Efficient Estimation of Differential Gene Expression with Multiple Patterns

PubMed Central

Mollah, Mohammad Manir Hossain; Jamal, Rahman; Mokhtar, Norfilza Mohd; Harun, Roslan; Mollah, Md. Nurul Haque

2015-01-01

Background Identifying genes that are differentially expressed (DE) between two or more conditions with multiple patterns of expression is one of the primary objectives of gene expression data analysis. Several statistical approaches, including one-way analysis of variance (ANOVA), are used to identify DE genes. However, most of these methods provide misleading results for two or more conditions with multiple patterns of expression in the presence of outlying genes. In this paper, an attempt is made to develop a hybrid one-way ANOVA approach that unifies the robustness and efficiency of estimation using the minimum β-divergence method to overcome some problems that arise in the existing robust methods for both small- and large-sample cases with multiple patterns of expression. Results The proposed method relies on a β-weight function, which produces values between 0 and 1. The β-weight function with β = 0.2 is used as a measure of outlier detection. It assigns smaller weights (≥ 0) to outlying expressions and larger weights (≤ 1) to typical expressions. The distribution of the β-weights is used to calculate the cut-off point, which is compared to the observed β-weight of an expression to determine whether that gene expression is an outlier. This weight function plays a key role in unifying the robustness and efficiency of estimation in one-way ANOVA. Conclusion Analyses of simulated gene expression profiles revealed that all eight methods (ANOVA, SAM, LIMMA, EBarrays, eLNN, KW, robust BetaEB and proposed) perform almost identically for m = 2 conditions in the absence of outliers. However, the robust BetaEB method and the proposed method exhibited considerably better performance than the other six methods in the presence of outliers. In this case, the BetaEB method exhibited slightly better performance than the proposed method for the small-sample cases, but the the proposed method exhibited much better performance than the BetaEB method for both the small- and large-sample cases in the presence of more than 50% outlying genes. The proposed method also exhibited better performance than the other methods for m > 2 conditions with multiple patterns of expression, where the BetaEB was not extended for this condition. Therefore, the proposed approach would be more suitable and reliable on average for the identification of DE genes between two or more conditions with multiple patterns of expression. PMID:26413858

A pharmacogenetic study of CD4 recovery in response to HIV antiretroviral therapy in two South African population groups.

PubMed

Parathyras, John; Gebhardt, Stefan; Hillermann-Rebello, Renate; Grobbelaar, Nelis; Venter, Mauritz; Warnich, Louise

2009-05-01

South Africa, like many other Southern African countries, has one of the highest HIV infection rates in the world and many individuals consequently receive antiretroviral therapy (ART). However, knowledge regarding (i) the prevalence of functional single nucleotide polymorphisms (SNPs) in pharmacologically relevant genes, and (ii) variance in pharmacotherapy both within and between different populations and ethnic groups is limited. The aim of this study was to determine whether selected polymorphisms in cytochrome P450 (CYP) genes (CYP2B6 and CYP3A4) and the multidrug-resistance 1 (ABCB1) gene underlie altered antiretroviral (ARV) drug response in two South African populations. DNA samples from 182 HIV-positive individuals of Mixed-Ancestry and Xhosa ethnicity on ART were genotyped for the A-392G SNP in CYP3A4, the G516T and A785G SNPs in CYP2B6, and the T-129C, C1236T, G2677T/A and C3435T SNPs in ABCB1. Univariate two-way analysis of variance (ANOVA) testing revealed no apparent effect of ethnicity on immune recovery (in terms of CD4-cell count) in response to ART. Univariate one-way ANOVA testing revealed a discernible effect of genotype on immune recovery in the cases of the T-129C (P=0.03) and G2677A (P<0.01) polymorphisms in the ABCB1 gene. This study serves as a basis for better understanding and possible prediction of pharmacogenetic risk profiles and drug response in individuals and ethnic groups in South Africa.

Tensiomyographical responses to accelerometer loads in female collegiate basketball players.

PubMed

Peterson, Kyle D; Quiggle, Gabriela T

2017-12-01

The purpose of the present study was to characterise the relationship between relative versus absolute internal and external loads in collegiate basketball players throughout the course of a season. Five Division I basketball players wore triaxial accelerometers throughout the 2015-2016 season and were tensiomyographically assessed weekly. One-way repeated-measure analysis of variance (RM ANOVA) with least-significant-difference (LSD) pairwise comparisons was used to determine which absolute weekly loads were different across the season. Cohen's d was used to supplement the determination of meaningful relative load changes. Overall RM ANOVA models suggest absolute external load differences occurred (PlayerLoad™ F = 17.63; IMA™ F = 31.63). Two-way RM ANOVA models revealed main effect differences were revealed between muscle groups for Tc (F = 9.11) and Dm (F = 3.25). Meaningful relative load changes between weeks were observed for both external and internal. The present study observed that tensiomyography utilised as a tool to monitor internal load may be more suitable for detecting fatigue from relative external load changes versus absolute load attained. Limiting weekly training volume changes to ≤10% may maintain appropriate adaptation. Mediolateral plane IMA™ and adductor longus muscle group may be pertinent metrics when monitoring female collegiate basketball athletes.

Biostatistics Series Module 3: Comparing Groups: Numerical Variables.

PubMed

Hazra, Avijit; Gogtay, Nithya

2016-01-01

Numerical data that are normally distributed can be analyzed with parametric tests, that is, tests which are based on the parameters that define a normal distribution curve. If the distribution is uncertain, the data can be plotted as a normal probability plot and visually inspected, or tested for normality using one of a number of goodness of fit tests, such as the Kolmogorov-Smirnov test. The widely used Student's t-test has three variants. The one-sample t-test is used to assess if a sample mean (as an estimate of the population mean) differs significantly from a given population mean. The means of two independent samples may be compared for a statistically significant difference by the unpaired or independent samples t-test. If the data sets are related in some way, their means may be compared by the paired or dependent samples t-test. The t-test should not be used to compare the means of more than two groups. Although it is possible to compare groups in pairs, when there are more than two groups, this will increase the probability of a Type I error. The one-way analysis of variance (ANOVA) is employed to compare the means of three or more independent data sets that are normally distributed. Multiple measurements from the same set of subjects cannot be treated as separate, unrelated data sets. Comparison of means in such a situation requires repeated measures ANOVA. It is to be noted that while a multiple group comparison test such as ANOVA can point to a significant difference, it does not identify exactly between which two groups the difference lies. To do this, multiple group comparison needs to be followed up by an appropriate post hoc test. An example is the Tukey's honestly significant difference test following ANOVA. If the assumptions for parametric tests are not met, there are nonparametric alternatives for comparing data sets. These include Mann-Whitney U-test as the nonparametric counterpart of the unpaired Student's t-test, Wilcoxon signed-rank test as the counterpart of the paired Student's t-test, Kruskal-Wallis test as the nonparametric equivalent of ANOVA and the Friedman's test as the counterpart of repeated measures ANOVA.

Teaching Principles of Inference with ANOVA

ERIC Educational Resources Information Center

Tarlow, Kevin R.

2016-01-01

Analysis of variance (ANOVA) is a test of "mean" differences, but the reference to "variances" in the name is often overlooked. Classroom activities are presented to illustrate how ANOVA works with emphasis on how to think critically about inferential reasoning.

Salt stress-induced transcription of σB- and CtsR-regulated genes in persistent and non-persistent Listeria monocytogenes strains from food processing plants.

PubMed

Ringus, Daina L; Ivy, Reid A; Wiedmann, Martin; Boor, Kathryn J

2012-03-01

Listeria monocytogenes is a foodborne pathogen that can persist in food processing environments. Six persistent and six non-persistent strains from fish processing plants and one persistent strain from a meat plant were selected to determine if expression of genes in the regulons of two stress response regulators, σ(B) and CtsR, under salt stress conditions is associated with the ability of L. monocytogenes to persist in food processing environments. Subtype data were also used to categorize the strains into genetic lineages I or II. Quantitative reverse transcriptase-polymerase chain reaction (qRT-PCR) was used to measure transcript levels for two σ(B)-regulated genes, inlA and gadD3, and two CtsR-regulated genes, lmo1138 and clpB, before and after (t=10 min) salt shock (i.e., exposure of exponential phase cells to BHI+6% NaCl for 10 min at 37°C). Exposure to salt stress induced higher transcript levels relative to levels under non-stress conditions for all four stress and virulence genes across all wildtype strains tested. Analysis of variance (ANOVA) of induction data revealed that transcript levels for one gene (clpB) were induced at significantly higher levels in non-persistent strains compared to persistent strains (p=0.020; two-way ANOVA). Significantly higher transcript levels of gadD3 (p=0.024; two-way ANOVA) and clpB (p=0.053; two-way ANOVA) were observed after salt shock in lineage I strains compared to lineage II strains. No clear association between stress gene transcript levels and persistence was detected. Our data are consistent with an emerging model that proposes that establishment of L. monocytogenes persistence in a specific environment occurs as a random, stochastic event, rather than as a consequence of specific bacterial strain characteristics.

A SAS(®) macro implementation of a multiple comparison post hoc test for a Kruskal-Wallis analysis.

PubMed

Elliott, Alan C; Hynan, Linda S

2011-04-01

The Kruskal-Wallis (KW) nonparametric analysis of variance is often used instead of a standard one-way ANOVA when data are from a suspected non-normal population. The KW omnibus procedure tests for some differences between groups, but provides no specific post hoc pair wise comparisons. This paper provides a SAS(®) macro implementation of a multiple comparison test based on significant Kruskal-Wallis results from the SAS NPAR1WAY procedure. The implementation is designed for up to 20 groups at a user-specified alpha significance level. A Monte-Carlo simulation compared this nonparametric procedure to commonly used parametric multiple comparison tests. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Variation in Seed Germination of 134 Common Species on the Eastern Tibetan Plateau: Phylogenetic, Life History and Environmental Correlates

PubMed Central

Xu, Jing; Li, Wenlong; Zhang, Chunhui; Liu, Wei; Du, Guozhen

2014-01-01

Seed germination is a crucial stage in the life history of a species because it represents the pathway from adult to offspring, and it can affect the distribution and abundance of species in communities. In this study, we examined the effects of phylogenetic, life history and environmental factors on seed germination of 134 common species from an alpine/subalpine meadow on the eastern Tibetan Plateau. In one-way ANOVAs, phylogenetic groups (at or above order) explained 13.0% and 25.9% of the variance in germination percentage and mean germination time, respectively; life history attributes, such as seed size, dispersal mode, explained 3.7%, 2.1% of the variance in germination percentage and 6.3%, 8.7% of the variance in mean germination time, respectively; the environmental factors temperature and habitat explained 4.7%, 1.0% of the variance in germination percentage and 13.5%, 1.7% of the variance in mean germination time, respectively. Our results demonstrated that elevated temperature would lead to a significant increase in germination percentage and an accelerated germination. Multi-factorial ANOVAs showed that the three major factors contributing to differences in germination percentage and mean germination time in this alpine/subalpine meadow were phylogenetic attributes, temperature and seed size (explained 10.5%, 4.7% and 1.4% of the variance in germination percentage independently, respectively; and explained 14.9%, 13.5% and 2.7% of the variance in mean germination time independently, respectively). In addition, there were strong associations between phylogenetic group and life history attributes, and between life history attributes and environmental factors. Therefore, germination variation are constrained mainly by phylogenetic inertia in a community, and seed germination variation correlated with phylogeny is also associated with life history attributes, suggesting a role of niche adaptation in the conservation of germination variation within lineages. Meanwhile, selection can maintain the association between germination behavior and the environmental conditions within a lineage. PMID:24893308

Technical Note: Introduction of variance component analysis to setup error analysis in radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matsuo, Yukinori, E-mail: ymatsuo@kuhp.kyoto-u.ac.

Purpose: The purpose of this technical note is to introduce variance component analysis to the estimation of systematic and random components in setup error of radiotherapy. Methods: Balanced data according to the one-factor random effect model were assumed. Results: Analysis-of-variance (ANOVA)-based computation was applied to estimate the values and their confidence intervals (CIs) for systematic and random errors and the population mean of setup errors. The conventional method overestimates systematic error, especially in hypofractionated settings. The CI for systematic error becomes much wider than that for random error. The ANOVA-based estimation can be extended to a multifactor model considering multiplemore » causes of setup errors (e.g., interpatient, interfraction, and intrafraction). Conclusions: Variance component analysis may lead to novel applications to setup error analysis in radiotherapy.« less

Testing Interaction Effects without Discarding Variance.

ERIC Educational Resources Information Center

Lopez, Kay A.

Analysis of variance (ANOVA) and multiple regression are two of the most commonly used methods of data analysis in behavioral science research. Although ANOVA was intended for use with experimental designs, educational researchers have used ANOVA extensively in aptitude-treatment interaction (ATI) research. This practice tends to make researchers…

Simulation of Autonomic Logistics System (ALS) Sortie Generation

DTIC Science & Technology

2003-03-01

84 Appendix B. ANOVA Assumptions Mission Capable Rate ANOVA Assumptions Constant Variance SSR # X cols SSE n Breusch - Pagan Chi-square 3.57E...85 Flying Scheduling Effectiveness ANOVA Assumptions Constant Variance SSR # X cols SSE n Breusch - Pagan Chi-square 2.12E-10 3 0.000816 270...Constant Variance SSR # X cols SSE n Breusch - Pagan Chi-square 1.86E-09 3 0.003758 270 3.20308814 0.9556957 Independence Durbin-Watson

Analysis of Variance: What Is Your Statistical Software Actually Doing?

ERIC Educational Resources Information Center

Li, Jian; Lomax, Richard G.

2011-01-01

Users assume statistical software packages produce accurate results. In this article, the authors systematically examined Statistical Package for the Social Sciences (SPSS) and Statistical Analysis System (SAS) for 3 analysis of variance (ANOVA) designs, mixed-effects ANOVA, fixed-effects analysis of covariance (ANCOVA), and nested ANOVA. For each…

Finding P-Values for F Tests of Hypothesis on a Spreadsheet.

ERIC Educational Resources Information Center

Rochowicz, John A., Jr.

The calculation of the F statistic for a one-factor analysis of variance (ANOVA) and the construction of an ANOVA tables are easily implemented on a spreadsheet. This paper describes how to compute the p-value (observed significance level) for a particular F statistic on a spreadsheet. Decision making on a spreadsheet and applications to the…

Efficacy of Miswak toothpaste and mouthwash on cariogenic bacteria

PubMed Central

Al-Dabbagh, Samim A.; Qasim, Huda J.; Al-Derzi, Nadia A.

2016-01-01

Objectives: To evaluate the efficacy of Salvadora persica (Miswak) products on cariogenic bacteria in comparison with ordinary toothpaste. Methods: The study was conducted in Zakho city, Kurdistan region, Iraq during the period from October 2013 to January 2014. A randomized controlled clinical trial of 40 students randomly allocated into 4 groups. They were instructed to use Mismark toothpaste, Miswak mouthwash, and ordinary toothpaste with water or with normal saline. Salivary samples were collected at 3-time intervals: before, immediately after use, and after 2 weeks of use. The effect of each method on Streptococcus mutans and Lactobacilli was evaluated by using caries risk test. Results: One-way repeated measure analysis of variance (ANOVA), one-way ANOVA, and least significant difference tests were used. Miswak wash has a significant reduction effect on both bacteria immediately and after 2 weeks of use. Miswak paste has a similar effect on Lactobacilli, while Streptococcus mutans showed a significant decrease only after 2 weeks of use. Ordinary paste showed a non significant effect on both bacteria at both time intervals; while the addition of normal saline showed a significant effect on both bacteria only after 2 weeks of use. Conclusion: Miswak products, especially mouth wash, were more effective in reducing the growth of cariogenic bacteria than ordinary toothpaste. PMID:27570858

A study on the compatibility between one-bottle dentin adhesives and composite resins using micro-shear bond strength.

PubMed

Song, Minju; Shin, Yooseok; Park, Jeong-Won; Roh, Byoung-Duck

2015-02-01

This study was performed to determine whether the combined use of one-bottle self-etch adhesives and composite resins from same manufacturers have better bond strengths than combinations of adhesive and resins from different manufacturers. 25 experimental micro-shear bond test groups were made from combinations of five dentin adhesives and five composite resins with extracted human molars stored in saline for 24 hr. Testing was performed using the wire-loop method and a universal testing machine. Bond strength data was statistically analyzed using two way analysis of variance (ANOVA) and Tukey's post hoc test. Two way ANOVA revealed significant differences for the factors of dentin adhesives and composite resins, and significant interaction effect (p < 0.001). All combinations with Xeno V (Dentsply De Trey) and Clearfil S(3) Bond (Kuraray Dental) adhesives showed no significant differences in micro-shear bond strength, but other adhesives showed significant differences depending on the composite resin (p < 0.05). Contrary to the other adhesives, Xeno V and BondForce (Tokuyama Dental) had higher bond strengths with the same manufacturer's composite resin than other manufacturer's composite resin. Not all combinations of adhesive and composite resin by same manufacturers failed to show significantly higher bond strengths than mixed manufacturer combinations.

A COMPARISON OF GREEN SUPPLY CHAIN MANAGEMENT PRACTICES AMONG INDUSTRIES SECTORS IN CHINA

NASA Astrophysics Data System (ADS)

Sun, Ying; Miyadera, Tetsuhiko; Fujita, Tsuyoshi

This paper aims to examine the differences of Green supply chain management (GSCM) implementation among chemical, automobile and machinery industries in China based on a questionnaire survey designed by Industrial Ecology at two industrial parks in Shenyang city. Exploratory factor analysis and one way analysis of variance (ANOVA) were used to analyze the data. The main result was that the GSCM practices of the three industries are still at a beginning stage. The level of GSCM practices of automobile industry (promoted by international market competition) was higher than those of chemical and machinery industry (promoted by domestic laws and policies).

Time-frequency analysis of human motion during rhythmic exercises.

PubMed

Omkar, S N; Vyas, Khushi; Vikranth, H N

2011-01-01

Biomechanical signals due to human movements during exercise are represented in time-frequency domain using Wigner Distribution Function (WDF). Analysis based on WDF reveals instantaneous spectral and power changes during a rhythmic exercise. Investigations were carried out on 11 healthy subjects who performed 5 cycles of sun salutation, with a body-mounted Inertial Measurement Unit (IMU) as a motion sensor. Variance of Instantaneous Frequency (I.F) and Instantaneous Power (I.P) for performance analysis of the subject is estimated using one-way ANOVA model. Results reveal that joint Time-Frequency analysis of biomechanical signals during motion facilitates a better understanding of grace and consistency during rhythmic exercise.

Utilizing Telemedicine in the Trauma Intensive Care Unit: Does It Impact Teamwork?

PubMed

Lazzara, Elizabeth H; Benishek, Lauren E; Patzer, Brady; Gregory, Megan E; Hughes, Ashley M; Heyne, Kyle; Salas, Eduardo; Kuchkarian, Fernanda; Marttos, Antonio; Schulman, Carl

2015-08-01

The aim of this study was to examine the impact of a telemedical robot on trauma intensive care unit (TICU) clinician teamwork (i.e., team attitudes, behaviors, and cognitions) during patient rounds. Thirty-two healthcare providers who conduct rounds volunteered to take surveys assessing teamwork attitudes and cognitions at three time periods: (1) the onset of the study, (2) the end of the 30-day control period, and (3) the end of the 30-day experimental period, which immediately followed the control period. Rounds were recorded throughout the 30-day control period and 30-day experimental period to observe provider behaviors. For the initial 30 days, there was no access to telemedicine. For the final 30 days, the rounding healthcare providers had access to the RP-7 robot (Intouch Health Inc., Santa Barbara, CA), a telemedical tool that can facilitate patient rounds conducted away from bedside. Using a one-tailed, one-way repeated-measures analysis of variance (ANOVA) to compare trust at Times 1, 2, and 3, there was no significant effect on trust: F(2, 14)=1.20, p=0.16. When a one-tailed, one-way repeated-measures ANOVA to compare transactive memory systems (TMS) at Times 1, 2, and 3 was conducted, there was no significant effect on TMS: F(2, 15)=1.33, p=0.15. We conducted a one-tailed, one-way repeated-measures ANOVA to compare team psychological safety at Times 1, 2, and 3, and there was no significant effect on team psychological safety: F(2,15)=1.53, p=0.12. There was a significant difference in communication between rounds with and without telemedicine [t(25)=-1.76, p<0.05], such that there was more task-based communication during telerounds. Telemedicine increased task-based communication and did not negatively impact team trust, psychological safety, or TMS during rounds. Telemedicine may offer advantages for some teamwork competencies without sacrificing the efficacy of others and may be adopted by intact rounding teams without hindering teamwork.

Analysis of Variance: Variably Complex

ERIC Educational Resources Information Center

Drummond, Gordon B.; Vowler, Sarah L.

2012-01-01

These authors have previously described how to use the "t" test to compare two groups. In this article, they describe the use of a different test, analysis of variance (ANOVA) to compare more than two groups. ANOVA is a test of group differences: do at least two of the means differ from each other? ANOVA assumes (1) normal distribution…

40 CFR 264.97 - General ground-water monitoring requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... paragraph (i) of this section. (1) A parametric analysis of variance (ANOVA) followed by multiple... mean levels for each constituent. (2) An analysis of variance (ANOVA) based on ranks followed by...

Masticatory and cervical muscle tenderness and pain sensitivity in a remote area in subjects with a temporomandibular disorder and neck disability.

PubMed

Silveira, Anelise; Armijo-Olivo, Susan; Gadotti, Inae C; Magee, David

2014-01-01

To compare the masticatory and cervical muscle tenderness and pain sensitivity in the hand (remote region) between patients with temporomandibular disorders (TMD) and healthy controls. Twenty female subjects were diagnosed with chronic TMD, and 20 were considered healthy. Subjects completed the Neck Disability Index and Limitations of Daily Functions in a TMD questionnaire. Tenderness of the masticatory and cervical muscles and pain sensitivity in the hand were measured using an algometer. Three-way mixed analysis of variance (ANOVA) evaluated differences in muscle tenderness between groups. One-way ANOVA compared pain sensitivity in the hand between groups. Effect sizes were assessed using Cohen guidelines. Significantly increased masticatory and cervical muscle tenderness and pain sensitivity in the hand were found in subjects with TMD when compared with healthy subjects. Moderate to high effect sizes showed the clinical relevance of the findings. The results of this study have highlighted the importance of assessing TMD patients not only in the craniofacial region but also in the neck and other parts of the body. Future studies should focus on testing the effectiveness of treatments addressing the neck and the pain sensitivity in the hand in patients with TMD.

Characterization of near infrared spectral variance in the authentication of skim and nonfat dry milk powder collection using ANOVA-PCA, Pooled-ANOVA, and partial least squares regression

USDA-ARS?s Scientific Manuscript database

Forty-one samples of skim milk powder (SMP) and non-fat dry milk (NFDM) from 8 suppliers, 13 production sites, and 3 processing temperatures were analyzed by NIR diffuse reflectance spectrometry over a period of three days. NIR reflectance spectra (1700-2500 nm) were converted to pseudo-absorbance ...

Effect of spatial resolution on remote sensing estimation of total evaporation in the uMngeni catchment, South Africa

NASA Astrophysics Data System (ADS)

Shoko, Cletah; Clark, David; Mengistu, Michael; Dube, Timothy; Bulcock, Hartley

2015-01-01

This study evaluated the effect of two readily available multispectral sensors: the newly launched 30 m spatial resolution Landsat 8 and the long-serving 1000 m moderate resolution imaging spectroradiometer (MODIS) datasets in the spatial representation of total evaporation in the heterogeneous uMngeni catchment, South Africa, using the surface energy balance system model. The results showed that sensor spatial resolution plays a critical role in the accurate estimation of energy fluxes and total evaporation across a heterogeneous catchment. Landsat 8 estimates showed better spatial representation of the biophysical parameters and total evaporation for different land cover types, due to the relatively higher spatial resolution compared to the coarse spatial resolution MODIS sensor. Moreover, MODIS failed to capture the spatial variations of total evaporation estimates across the catchment. Analysis of variance (ANOVA) results showed that MODIS-based total evaporation estimates did not show any significant differences across different land cover types (one-way ANOVA; F1.924=1.412, p=0.186). However, Landsat 8 images yielded significantly different estimates between different land cover types (one-way ANOVA; F1.993=5.185, p<0.001). The validation results showed that Landsat 8 estimates were more comparable to eddy covariance (EC) measurements than the MODIS-based total evaporation estimates. EC measurement on May 23, 2013, was 3.8 mm/day, whereas the Landsat 8 estimate on the same day was 3.6 mm/day, with MODIS showing significantly lower estimates of 2.3 mm/day. The findings of this study underscore the importance of spatial resolution in estimating spatial variations of total evaporation at the catchment scale, thus, they provide critical information on the relevance of the readily available remote sensing products in water resources management in data-scarce environments.

The use of reinforced composite resin cement as compensation for reduced post length.

PubMed

Nissan, J; Dmitry, Y; Assif, D

2001-09-01

Cements that yield high retentive values are believed to allow use of shorter posts. This study investigated the use of reinforced composite resin cement as compensation for reduced dowel length. The retention values of stainless steel posts (parallel-sided ParaPost and tapered Dentatus in 5-, 8-, and 10-mm lengths) luted with Flexi-Flow titanium-reinforced composite resin and zinc phosphate cements were evaluated. Single-rooted extracted human teeth with crowns (n = 120), removed at the cementoenamel junction, were randomly divided into 4 groups of 30 samples each. Different post lengths were luted with either Flexi-Flow or zinc phosphate. Each sample was placed into a specialized jig and on a tensile testing machine with a crosshead speed of 2 mm/min, applied until failure. The effect of different posts and cements on the force required to dislodge the dowels was evaluated with multiple analyses of variance (ANOVA). One-way ANOVA with Scheffé contrast was applied to determine the effect of different post lengths on the retentive failure of posts luted with the 2 agents. Flexi-Flow reinforced composite resin cement significantly increased retention of ParaPost and Dentatus dowels (P<.001) compared with zinc phosphate. One-way ANOVA revealed no statistically significant difference (P>.05) between mean retention of both dowels luted with Flexi-Flow for all posts length used (5 mm = 8 mm = 10 mm). Mean retention values of the groups luted with zinc phosphate showed a statistically significant difference (P<.001) for the different post lengths (10 > 8 > 5 mm). Parallel-sided ParaPost dowels demonstrated a higher mean retention than tapered Dentatus dowels (P<.001). In this study, Flexi-Flow reinforced composite resin cement compensated for the reduced length of shorter parallel-sided ParaPost and tapered Dentatus dowels.

The relationship investigation between factors affecting demand for broadband and the level of satisfaction among broadband customers in the South East Coast of Sabah, Malaysia

NASA Astrophysics Data System (ADS)

Hashim, S. H. A.; Hamid, F. A.; Kiram, J. J.; Sulaiman, J.

2017-09-01

This paper aims to investigate the relationship between factors that affecting the demand for broadband and the level of satisfaction. Previous researchers have found that the adoption of broadband is greatly influenced by many factors. Thus, in this study, a self-administered questionnaire was developed to obtain the factors affecting demand for broadband among broadband customers as well as their level of satisfaction. Pearson correlation, one-way analysis of variance (ANOVA) and t-test were used for statistical interpretation of the relationship. This study shows that there are better relationships between several factors over demand for broadband and satisfaction level.

Gloss and Stain Resistance of Ceramic-Polymer CAD/CAM Restorative Blocks.

PubMed

Lawson, Nathaniel C; Burgess, John O

2016-03-01

To evaluate the gloss and stain resistance of several new ceramic-polymer CAD/CAM blocks Specimens (4 mm) were sectioned from: Enamic (polymer-infused ceramic), LAVA Ultimate (nano-ceramic reinforced polymer), e.max (lithium disilicate), Paradigm C (porcelain), and Paradigm MZ100 (composite). Specimens were wet polished on a polishing wheel to either 320 grit silicon paper (un-polished, N = 8) or 2000 grit silicon carbide papers followed by a 0.05 μm alumina slurry (polished, N = 8). Initial gloss and color (L*a*b*) values were measured. Specimens were stored in a staining solution at 37°C in darkness for 12 days (simulating 1 year). After storage, L*a*b* values re-measured. Change in color was reported as ΔE00 based on the CIEDE2000 formula. Gloss and ΔE00 were analyzed by two-way analysis of variance (ANOVA) (alpha = .05). Separate one-way ANOVA and Tukey post-hoc analyses were performed for both polish conditions and all materials. Two-way ANOVA showed that factors material, polish and their interaction were significant for both gloss and ΔE00 (p < .01). Post-hoc analysis reveals that polished specimens had significantly less color change than un-polished specimens for Paradigm C and LAVA Ultimate. E.max had significantly higher gloss and less color change than all other materials. The composition and polish of CAD/CAM materials affects gloss and stain resistance. Ceramic-polymer hybrid materials can achieve the high gloss required for esthetic restorations. These materials should be polished in order to minimize staining. If polished, all of the tested materials exhibited clinically acceptable color changes at 1 year of simulated staining. (J Esthet Restor Dent 28:S40-S45, 2016). © 2015 Wiley Periodicals, Inc.

Tools for Basic Statistical Analysis

NASA Technical Reports Server (NTRS)

Luz, Paul L.

2005-01-01

Statistical Analysis Toolset is a collection of eight Microsoft Excel spreadsheet programs, each of which performs calculations pertaining to an aspect of statistical analysis. These programs present input and output data in user-friendly, menu-driven formats, with automatic execution. The following types of calculations are performed: Descriptive statistics are computed for a set of data x(i) (i = 1, 2, 3 . . . ) entered by the user. Normal Distribution Estimates will calculate the statistical value that corresponds to cumulative probability values, given a sample mean and standard deviation of the normal distribution. Normal Distribution from two Data Points will extend and generate a cumulative normal distribution for the user, given two data points and their associated probability values. Two programs perform two-way analysis of variance (ANOVA) with no replication or generalized ANOVA for two factors with four levels and three repetitions. Linear Regression-ANOVA will curvefit data to the linear equation y=f(x) and will do an ANOVA to check its significance.

Severity and prevalence of plaque-induced gingivitis in the Chinese population.

PubMed

Zhang, Jincai; Xuan, Dongying; Fan, Weihua; Zhang, Xiong; Dibart, Serge; De Vizio, William; Panagakos, Foti; Zhang, Yun-Po

2010-10-01

This study investigated the prevalence and severity of gingivitis and plaque in a representative Chinese population of adults. Using the Loe-Silness gingivitis index (GI) and the modified Quigley-Hein plaque index (PULI), researchers examined 1143 patients from Guangzhou, Shenyang, and Nanjing for the presence of gingivitis and plaque. A two-tailed t-test was used to determine significant differences in the GI and PLI scores between gender and urban/rural areas. The data pertaining to study sites and age groups were compared using the Kruskal-Wallis one-way analysis of variances (ANOVA) by ranks. The correlation between GI/PLI and age was examined using the Pearson correlation coefficient. Age differences among three sites were analyzed with the one-way ANOVA. The age and urban/rural compositions (mean age 42.2 years) paralleled the 2008 China census. The overall average and standard deviation of GI and PLI were 1.101 +/- 0.239 and 3.394 +/- 0.578, respectively. Age significantly correlated with GI and PLI (P < .0001). The PLI in males was significantly higher (P < .0001) than in females; however, no significant difference was noted between GI in males compared to females. Patients in rural areas showed a significantly higher GI and PLI (t = 7.723, P < .0001; t = 7.072, P < .0001) than those in urban ones. Clinical trials evaluating a product's antigingivitis efficacy should recruit participants from a population that represents accurately the intended product users. Variables should include gender, race, age, and geography.

Effectiveness of probiotic, chlorhexidine and fluoride mouthwash against Streptococcus mutans – Randomized, single-blind, in vivo study

PubMed Central

Jothika, Mohan; Vanajassun, P. Pranav; Someshwar, Battu

2015-01-01

Aim: To determine the short-term efficiency of probiotic, chlorhexidine, and fluoride mouthwashes on plaque Streptococcus mutans level at four periodic intervals. Materials and Methods: This was a single-blind, randomized control study in which each subject was tested with only one mouthwash regimen. Fifty-two healthy qualified adult patients were selected randomly for the study and were divided into the following groups: group 1- 10 ml of distilled water, group 2- 10 ml of 0.2% chlorhexidine mouthwash, group 3- 10 ml of 500 ppm F/400 ml sodium fluoride mouthwash, and group 4- 10 ml of probiotic mouthwash. Plaque samples were collected from the buccal surface of premolars and molars in the maxillary quadrant. Sampling procedure was carried out by a single examiner after 7 days, 14 days, and 30 days, respectively, after the use of the mouthwash. All the samples were subjected to microbiological analysis and statistically analyzed with one-way analysis of variance (ANOVA) and post-hoc test. Results: One-way ANOVA comparison among groups 2, 3, and 4 showed no statistical significance, whereas group 1 showed statistically significant difference when compared with groups 2, 3, and 4 at 7th, 14th, and 30th day. Conclusion: Chlorhexidine, sodium fluoride, and probiotic mouthwashes reduce plaque S. mutans levels. Probiotic mouthwash is effective and equivalent to chlorhexidine and sodium fluoride mouthwashes. Thus, probiotic mouthwash can also be considered as an effective oral hygiene regimen. PMID:25984467

Accuracy of different impression materials in parallel and nonparallel implants

PubMed Central

Vojdani, Mahroo; Torabi, Kianoosh; Ansarifard, Elham

2015-01-01

Background: A precise impression is mandatory to obtain passive fit in implant-supported prostheses. The aim of this study was to compare the accuracy of three impression materials in both parallel and nonparallel implant positions. Materials and Methods: In this experimental study, two partial dentate maxillary acrylic models with four implant analogues in canines and lateral incisors areas were used. One model was simulating the parallel condition and the other nonparallel one, in which implants were tilted 30° bucally and 20° in either mesial or distal directions. Thirty stone casts were made from each model using polyether (Impregum), additional silicone (Monopren) and vinyl siloxanether (Identium), with open tray technique. The distortion values in three-dimensions (X, Y and Z-axis) were measured by coordinate measuring machine. Two-way analysis of variance (ANOVA), one-way ANOVA and Tukey tests were used for data analysis (α = 0.05). Results: Under parallel condition, all the materials showed comparable, accurate casts (P = 0.74). In the presence of angulated implants, while Monopren showed more accurate results compared to Impregum (P = 0.01), Identium yielded almost similar results to those produced by Impregum (P = 0.27) and Monopren (P = 0.26). Conclusion: Within the limitations of this study, in parallel conditions, the type of impression material cannot affect the accuracy of the implant impressions; however, in nonparallel conditions, polyvinyl siloxane is shown to be a better choice, followed by vinyl siloxanether and polyether respectively. PMID:26288620

Marginal and internal fits of fixed dental prostheses zirconia retainers.

PubMed

Beuer, Florian; Aggstaller, Hans; Edelhoff, Daniel; Gernet, Wolfgang; Sorensen, John

2009-01-01

CAM (computer-aided manufacturing) and CAD (computer-aided design)/CAM systems facilitate the use of zirconia substructure materials for all-ceramic fixed partial dentures. This in vitro study compared the precision of fit of frameworks milled from semi-sintered zirconia blocks that were designed and machined with two CAD/CAM and one CAM system. Three-unit posterior fixed dental prostheses (FDP) (n=10) were fabricated for standardized dies by: a milling center CAD/CAM system (Etkon), a laboratory CAD/CAM system (Cerec InLab), and a laboratory CAM system (Cercon). After adaptation by a dental technician, the FDP were cemented on definitive dies, embedded and sectioned. The marginal and internal fits were measured under an optical microscope at 50x magnification. A one-way analysis of variance (ANOVA) was used to compare data (alpha=0.05). The mean (S.D.) for the marginal fit and internal fit adaptation were: 29.1 microm (14.0) and 62.7 microm (18.9) for the milling center system, 56.6 microm (19.6) and 73.5 microm (20.6) for the laboratory CAD/CAM system, and 81.4 microm (20.3) and 119.2 microm (37.5) for the laboratory CAM system. One-way ANOVA showed significant differences between systems for marginal fit (P<0.001) and internal fit (P<0.001). All systems showed marginal gaps below 120 microm and were therefore considered clinically acceptable. The CAD/CAM systems were more precise than the CAM system.

WASP (Write a Scientific Paper) using Excel 9: Analysis of variance.

PubMed

Grech, Victor

2018-06-01

Analysis of variance (ANOVA) may be required by researchers as an inferential statistical test when more than two means require comparison. This paper explains how to perform ANOVA in Microsoft Excel. Copyright © 2018 Elsevier B.V. All rights reserved.

Quantitative Comparison of Three Standardization Methods Using a One-Way ANOVA for Multiple Mean Comparisons

ERIC Educational Resources Information Center

Barrows, Russell D.

2007-01-01

A one-way ANOVA experiment is performed to determine whether or not the three standardization methods are statistically different in determining the concentration of the three paraffin analytes. The laboratory exercise asks students to combine the three methods in a single analytical procedure of their own design to determine the concentration of…

The relative age effect among elite youth competitive swimmers.

PubMed

Costa, Aldo M; Marques, Mário C; Louro, Hugo; Ferreira, Sandra S; Marinho, Daniel A

2013-01-01

The aim of this study was to analyse the relative age effect (RAE) in competitive swimming. The best 50 Portuguese swimmers (12- to 18-year-olds) for the main individual swimming pool events of both genders were considered. Analysis was conducted on 7813 swimming event participants, taking account of respective swimmer birth dates and the Fédération Internationale de Natation points gained. Differences in the distribution of birth dates by quarter year were determined using the Chi-square. A one-way analysis of variance ANOVA was used to test for differences measured in points between individuals by quarterly birth year intervals. A two-way analysis of variance ANOVA was also conducted to test the interaction between gender and seasonal birth date with regard to performance. The results show an inequitable distribution (p<0.01) of birth dates by quarter for almost all age groups and both genders. However, the distribution of birth dates by quarter for each considered swim event shows that RAE seems to exist only for 12-year-old females and 12- to 15-year-old males. Analysing mean swimming performance, post-hoc results (p<0.01) show no consistency in RAE. Higher performance occurs among older swimmers only in 100 m butterfly (female 1998, 1st≠2nd quarter, p=0.003). The results also show no interaction between gender and seasonal birth date (p<0.01). Findings of this study show that a higher number of swimmers, particular males, are born in the first two quarters of the year, although there is mostly no effect of seasonal birth date on performance differences within the top 50 swimmers.

Formative Use of Intuitive Analysis of Variance

ERIC Educational Resources Information Center

Trumpower, David L.

2013-01-01

Students' informal inferential reasoning (IIR) is often inconsistent with the normative logic underlying formal statistical methods such as Analysis of Variance (ANOVA), even after instruction. In two experiments reported here, student's IIR was assessed using an intuitive ANOVA task at the beginning and end of a statistics course. In both…

Optimizing occupational exposure measurement strategies when estimating the log-scale arithmetic mean value--an example from the reinforced plastics industry.

PubMed

Lampa, Erik G; Nilsson, Leif; Liljelind, Ingrid E; Bergdahl, Ingvar A

2006-06-01

When assessing occupational exposures, repeated measurements are in most cases required. Repeated measurements are more resource intensive than a single measurement, so careful planning of the measurement strategy is necessary to assure that resources are spent wisely. The optimal strategy depends on the objectives of the measurements. Here, two different models of random effects analysis of variance (ANOVA) are proposed for the optimization of measurement strategies by the minimization of the variance of the estimated log-transformed arithmetic mean value of a worker group, i.e. the strategies are optimized for precise estimation of that value. The first model is a one-way random effects ANOVA model. For that model it is shown that the best precision in the estimated mean value is always obtained by including as many workers as possible in the sample while restricting the number of replicates to two or at most three regardless of the size of the variance components. The second model introduces the 'shared temporal variation' which accounts for those random temporal fluctuations of the exposure that the workers have in common. It is shown for that model that the optimal sample allocation depends on the relative sizes of the between-worker component and the shared temporal component, so that if the between-worker component is larger than the shared temporal component more workers should be included in the sample and vice versa. The results are illustrated graphically with an example from the reinforced plastics industry. If there exists a shared temporal variation at a workplace, that variability needs to be accounted for in the sampling design and the more complex model is recommended.

Factors influencing heterogeneity of radiation-induced DNA-damage measured by the alkaline comet assay.

PubMed

Seidel, Clemens; Lautenschläger, Christine; Dunst, Jürgen; Müller, Arndt-Christian

2012-04-20

To investigate whether different conditions of DNA structure and radiation treatment could modify heterogeneity of response. Additionally to study variance as a potential parameter of heterogeneity for radiosensitivity testing. Two-hundred leukocytes per sample of healthy donors were split into four groups. I: Intact chromatin structure; II: Nucleoids of histone-depleted DNA; III: Nucleoids of histone-depleted DNA with 90 mM DMSO as antioxidant. Response to single (I-III) and twice (IV) irradiation with 4 Gy and repair kinetics were evaluated using %Tail-DNA. Heterogeneity of DNA damage was determined by calculation of variance of DNA-damage (V) and mean variance (Mvar), mutual comparisons were done by one-way analysis of variance (ANOVA). Heterogeneity of initial DNA-damage (I, 0 min repair) increased without histones (II). Absence of histones was balanced by addition of antioxidants (III). Repair reduced heterogeneity of all samples (with and without irradiation). However double irradiation plus repair led to a higher level of heterogeneity distinguishable from single irradiation and repair in intact cells. Increase of mean DNA damage was associated with a similarly elevated variance of DNA damage (r = +0.88). Heterogeneity of DNA-damage can be modified by histone level, antioxidant concentration, repair and radiation dose and was positively correlated with DNA damage. Experimental conditions might be optimized by reducing scatter of comet assay data by repair and antioxidants, potentially allowing better discrimination of small differences. Amount of heterogeneity measured by variance might be an additional useful parameter to characterize radiosensitivity.

Physiological Efficacy of a Lightweight Ambient Air Cooling Unit for Various Applications

DTIC Science & Technology

1993-10-01

Acei 10. Mean skin temperature during continuous work . N*TIS. CRjI DTIC TAB 11. Thermal comfort rate during continuous work. . U nagnounf. 4...perceived exertion (RPE) and thermal comfort (TC) were taken every 10 min. Statistical analysis using a 3-way analysis of variance (ANOVA) was conducted...may account for the fact that no statistically significant differences were seen for thermal comfort and ratings of perceived exertion between the IC

Comparative Study of Motor Performance of Deaf and Hard of Hearing Students in Reaction Time, Visual-Motor Control and Upper Limb Speed and Dexterity Abilities

ERIC Educational Resources Information Center

Gkouvatzi, Anastasia N.; Mantis, Konstantinos; Kambas, Antonis

2010-01-01

Using the Bruininks-Oseretsky Test the motor performance of 34 deaf--hard-of-hearing pupils, 6-14 year, was evaluated in reaction time, visual-motor control and upper limb speed and dexterity. The two-way ANOVA variance analysis for two independent variables, group, age, and the Post Hoc (Scheffe test) for multiple comparisons were used. The…

A Demonstration of the Analysis of Variance Using Physical Movement and Space

ERIC Educational Resources Information Center

Owen, William J.; Siakaluk, Paul D.

2011-01-01

Classroom demonstrations help students better understand challenging concepts. This article introduces an activity that demonstrates the basic concepts involved in analysis of variance (ANOVA). Students who physically participated in the activity had a better understanding of ANOVA concepts (i.e., higher scores on an exam question answered 2…

Effect of implementing instructional videos in a physical examination course: an alternative paradigm for chiropractic physical examination teaching.

PubMed

Zhang, Niu; Chawla, Sudeep

2012-01-01

This study examined the effect of implementing instructional video in ophthalmic physical examination teaching on chiropractic students' laboratory physical examination skills and written test results. Instructional video clips of ophthalmic physical examination, consisting of both standard procedures and common mistakes, were created and used for laboratory teaching. The video clips were also available for student review after class. Students' laboratory skills and written test results were analyzed and compared using one-way analysis of variance (ANOVA) and post hoc multiple comparison tests among three study cohorts: the comparison cohort who did not utilize the instructional videos as a tool, the standard video cohort who viewed only the standard procedure of video clips, and the mistake-referenced video cohort who viewed video clips containing both standard procedure and common mistakes. One-way ANOVA suggested a significant difference of lab results among the three cohorts. Post hoc multiple comparisons further revealed that the mean scores of both video cohorts were significantly higher than that of the comparison cohort (p < .001). There was, however, no significant difference of the mean scores between the two video cohorts (p > .05). However, the percentage of students having a perfect score was the highest in the mistake-referenced video cohort. There was no significant difference of written test scores among all three cohorts (p > .05). The instructional video of the standard procedure improves chiropractic students' ophthalmic physical examination skills, which may be further enhanced by implementing a mistake-referenced instructional video.

Effect of different surface treatments on roughness of IPS Empress 2 ceramic.

PubMed

Kara, Haluk Baris; Dilber, Erhan; Koc, Ozlem; Ozturk, A Nilgun; Bulbul, Mehmet

2012-03-01

The aim of this study was to evaluate the influence of different surface treatments (air abrasion, acid etching, laser irradiation) on the surface roughness of a lithium-disilicate-based core ceramic. A total of 40 discs of lithium disilicate-based core ceramic (IPS Empress 2; Ivoclar Vivadent, Schaan, Liechtenstein) were prepared (10 mm in diameter and 1 mm in thickness) according to the manufacturer's instructions. Specimens were divided into four groups (n = 10), and the following treatments were applied: air abrasion with alumina particles (50 μm), acid etching with 5% hydrofluoric acid, Nd:YAG laser irradiation (1 mm distance, 100 mJ, 20 Hz, 2 W) and Er:YAG laser irradiation (1 mm distance, 500 mJ, 20 Hz, 10 W). Following determination of surface roughness (R(a)) by profilometry, specimens were examined with atomic force microscopy. The data were analysed by one-way analysis of variance (ANOVA) and Tukey HSD test (α = 0.05). One-way ANOVA indicated that surface roughness following air abrasion was significantly different from the surface roughness following laser irradiation and acid etching (P < 0.001). The Tukey HSD test indicated that the air abrasion group had a significantly higher mean value of roughness (P < 0.05) than the other groups. No significant difference was found between the acid etching and laser irradiation (both Er:YAG and Nd:YAG) groups (P > 0.05). Air abrasion increased surface roughness of lithium disilicate-based core ceramic surfaces more effectively than acid-etching and laser irradiation.

A Comparison of implant impression precision: Different materials and techniques

PubMed Central

Tabesh, Mahtab; Alikhasi, Marzieh

2018-01-01

Background Precision of implant impressions is a prerequisite for long-term success of implant supported prostheses. Impression materials and impression techniques are two important factors that impression precision relies on. Material and Methods A model of edentulous maxilla containing four implants inserted by All-on-4 guide was constructed. Seventy two impressions using polyether (PE), polyvinyl siloxane (PVS), and vinyl siloxanether (VSE) materials with direct and indirect techniques were made (n=12). Coordinates of implants in casts were measured using coordinate measuring machine (CMM). Data were analyzed with ANOVA; t-test and Tukey test were used for post hoc. Results With two-way ANOVA, mean values of linear displacements of implants were significantly different among materials and techniques. One-way ANOVA and Tukey showed significant difference between PE and VSE (P=0.019), PE and PVS (P=0.002) in direct technique, and between PVS and PE (P<0.001), PVS and VSE (P<0.001) in indirect technique. One-way ANOVA and t-test showed significant difference between the two techniques in PVS groups (P<0.001) and in PE groups (P=0.02). Two-way ANOVA showed mean values of rotational displacement of implants were significantly different among materials. One-way ANOVA and Tukey test showed significant difference between PVS and PE (P=0.001) and between PVS and VSE (P=0.012) in indirect groups. Conclusions On the basis of the results, when deciding on the material to make an impression of implants, PE is recommended for direct technique while PE and VSE are recommended for indirect technique. Recommended technique for VSE is either direct or indirect; and for PE and PVS is direct. Key words:Polyvinyl siloxane, polyether, vinyl siloxanether, direct technique, indirect technique, All-on-4, coordinate measuring machine. PMID:29670733

Effect of electrical spot welding on load deflection rate of orthodontic wires.

PubMed

Alavi, Shiva; Abrishami, Arezoo

2015-01-01

One of the methods used for joining metals together is welding, which can be carried out using different techniques such as electric spot welding. This study evaluated the effect of electric spot welding on the load deflection rate of stainless steel and chromium-cobalt orthodontic wires. In this experimental-laboratory study, load deflection rate of 0.016 × 0.022 inch stainless steel and chromium cobalt wires were evaluated in five groups (n =18): group one: Stainless steel wires, group two: chromium-cobalt wires, group three: stainless steel wires welded to stainless steel wires, group four: Stainless steel wires welded to chromium-cobalt wires, group five: chromium-cobalt wire welded to chromium-cobalt wires. Afterward, the forces induced by the samples in 0.5 mm, 1 mm, 1.5 mm deflection were measured using a universal testing machine. Then mean force measured for each group was compared with other groups. The data were analyzed using repeated measure analysis of variance (ANOVA), one-way ANOVA, and paired t-test by the SPSS software. The significance level was set as 0.05. The Tukey test showed that there were significant differences between the load deflection rates of welded groups compared to control ones (P < 0.001). Considering the limitation of this study, the electric spot welding process performed on stainless steel and chromium-cobalt wires increased their load deflection rates.

Comparing the efficacy of mydriatic cocktail-soaked sponge and conventional pupil dilation in patients using tamsulosin - a randomized controlled trial.

PubMed

Hargitai, János; Vezendi, László; Vigstrup, Jørgen; Eisgart, Finn; Lundbye-Christensen, Søren; Hargitai, Bálint; Vorum, Henrik

2013-12-20

A strong association exists between the use of tamsulosin and the occurance of intraoperative floppy iris syndrome. Several methods were advocated to overcome the progressive intraopertive miosis.Our purpose was to investigate the effect of a mydriatic-cocktail soaked cellulose sponge on perioperative pupil diameter in tamsulosin-treated patients undergoing elective cataract surgery. Patients using tamsulosin were dilated either with mydriatic-cocktail soaked sponge (group 1) or with conventional eyedrop regimen (group 2). Control patients not taking any α1 adrenergic receptor inhibtors were also dilated with mydriatic sponge (group 3).In all groups oxybuprocain 0.4%, cocain 4%, tropicamide 1%, phenylephrine 10%, diclophenac 0.1% along with chloramphenicol 0.5% were used preoperatively.Pupil diameter (mm) was measured preoperatively, after nucleus delivery, and before IOL implantation. Adverse effects associated with the use of sponge, minor and major intraoperative complications, the use of iris retractors and operation time were recorded.Differences in general between groups were analyzed with a one way analysis of variance (ANOVA); differences between groups in proportions were assessed by Fisher's exact test. Mean pupil diameter (mm) was preopertively: 7.52 ± 1.21, 7.30 ± 1.55 and 7.99 ± 0.96 (ANOVA: p = 0.079); after nucleus delivery: 6 ± 1.20, 6.29 ± 1.12 and 6.52 ± 0.81 (ANOVA: p = 0.123); before IOL implantation: 5.46 ± 1.06, 5.83 ± 1.09 and 6.17 ± 0.89 (ANOVA: p = 0.0291).No adverse effect related to sponge use was detected. Frequency of minor complications, and iris hook use was similar in the two tamsulosin treated group. Operation time did not differ significantly in the three groups. We have found that using a mydriatic cocktail-soaked wick - an alternative way to achieve intraoperative mydriasis for cataract surgery - was as effective and safe as the conventional repeated eyedrops regiment for tamsulosin treated patients. Current Controlled Trials ISRCTN37834752.

Influence of training and competitive sessions on peripheral β-endorphin levels in training show jumping horses.

PubMed

Cravana, Cristina; Medica, P; Ragonese, G; Fazio, E

2017-01-01

To investigate the effects of training sessions on circulating β-endorphin changes in sport horses before and after competition and to ascertain whether competition would affect this response. A total of 24 trained jumping horses were randomly assigned to one of two training groups: Group A (competing) and Group B (not competing). To determined plasma β-endorphin concentrations, two pre- and post-competition training weeks at aerobic workout and two competitive show jumping event days at anaerobic workout were measured before, 5 and 30 min after exercise. Exercise intensity is described using lactate concentrations and heart rate. The circuit design, intensity, and duration of training sessions were the same for both groups. In Group A, one-way analysis of variance for repeated measures (RM-ANOVA) showed significant effects of exercise on β-endorphin changes (F=14.41; p<0.001), only in the post-competition training sessions, while in Group B showed no significant effects. Two-way RM-ANOVA showed, after post-competition training sessions, a significant difference between Group A and Group B (F=6.235; p=0.023), with higher β-endorphin changes in Group A, compared to Group B. During the competitive show jumping sessions, one-way RM ANOVA showed significant effects of exercise on β-endorphin changes (F=51.10; p<0.001). The statistical analysis, in Group A, showed a significant difference between post-competition training and competitive exercise (F=6.32; p=0.024) with higher β-endorphin values in competitive sessions compared to those of post-competition training. Lactate concentrations seem to be the main factors being correlated with the raise of β-endorphin during anaerobic exercise of competitive events. Exercise of low intensity, as well as that one of training sessions, does not appear to stimulate a significant increased release of β-endorphin and it may depend on the duration of the exercise program. Moreover, the responses during exercise in the course of post-competition training sessions seem to be significantly different from those the pre-competition training. These data show that the preliminary competitive stress induced additional significant changes of β-endorphin pattern. It would reflect the need of a long-lasting modulation of fatigue and pain perception related to the effect of an additional physical and mental effort for the consecutive competitive and training sessions.

Factors influencing heterogeneity of radiation-induced DNA-damage measured by the alkaline comet assay

PubMed Central

2012-01-01

Background To investigate whether different conditions of DNA structure and radiation treatment could modify heterogeneity of response. Additionally to study variance as a potential parameter of heterogeneity for radiosensitivity testing. Methods Two-hundred leukocytes per sample of healthy donors were split into four groups. I: Intact chromatin structure; II: Nucleoids of histone-depleted DNA; III: Nucleoids of histone-depleted DNA with 90 mM DMSO as antioxidant. Response to single (I-III) and twice (IV) irradiation with 4 Gy and repair kinetics were evaluated using %Tail-DNA. Heterogeneity of DNA damage was determined by calculation of variance of DNA-damage (V) and mean variance (Mvar), mutual comparisons were done by one-way analysis of variance (ANOVA). Results Heterogeneity of initial DNA-damage (I, 0 min repair) increased without histones (II). Absence of histones was balanced by addition of antioxidants (III). Repair reduced heterogeneity of all samples (with and without irradiation). However double irradiation plus repair led to a higher level of heterogeneity distinguishable from single irradiation and repair in intact cells. Increase of mean DNA damage was associated with a similarly elevated variance of DNA damage (r = +0.88). Conclusions Heterogeneity of DNA-damage can be modified by histone level, antioxidant concentration, repair and radiation dose and was positively correlated with DNA damage. Experimental conditions might be optimized by reducing scatter of comet assay data by repair and antioxidants, potentially allowing better discrimination of small differences. Amount of heterogeneity measured by variance might be an additional useful parameter to characterize radiosensitivity. PMID:22520045

Relationships between compassion fatigue, burnout, and turnover intention in Korean hospital nurses.

PubMed

Sung, Kiwol; Seo, Youngsook; Kim, Jee Hee

2012-12-01

This study aimed to identify relationships between compassion fatigue, burnout, and turnover intention in Korean hospital nurses. In total, 142 hospital nurses were surveyed as part of data collection. Data related to compassion fatigue, burnout, and turnover intention were collected using a questionnaire between May 2011 and September 2011. The data analysis was performed using PASW 19.0 program, which included one-way ANOVA, independent t-tests, Pearson's correlation coefficient, and hierarchical regression analysis. This study detected a positive correlation between compassion fatigue and burnout(r=.37, p<.001), and turnover intention(r=.55, p<.001). Compassion fatigue accounted for 29.6% of the variance for turnover intention among Korean hospital nurses. The results indicate that it is necessary to reduce compassion fatigue, and turnover intention among Korean hospital nurses.

Effect of surface treatments on the bond strengths of facing composite resins to zirconia copings.

PubMed

Tsumita, M; Kokubo, Y; Kano, T

2012-09-01

The present study evaluated and compared the bond strength between zirconia and facing composite resin using different surface conditioning methods before and after thermocycling. Four primers, three opaque resins, and two facing composite resins were used, and 10 surface treatment procedures were conducted. The bond strength was measured before and after 4,000 cycles of thermocycling. The mean values of each group were statistically analyzed using one-way analysis of variance (ANOVA). The bond strengths of facing composite resins to zirconia after various treatments varied depending on the primers, opaque resins, body resins, and thermocycling. The application of primers and opaque resins to the zirconia surface after sandblasting is expected to yield strong bond strength of the facing composite resin (Estenia CG&B) even after thermocycling.

Iron Activation of Cellular Oxidases: Modulation of NeuronalViability (In Vitro).

DTIC Science & Technology

2018-04-06

Findings related to each specific aim of the study or project, answering each research or study questions, and/or hypothesis: The experimentation ...significant (NS) differences between groups when normalized to GAPDH. All groups were compared using one-way ANOVA with Tukey’s post -hoc test . Western...pɘ.0001. All groups were compared using one-way ANOVA with Tukey’s post -hoc test . All graphs represent n=6. Bars represent mean +/- SEM. It is

Efficacy and safety of a multiherbal formula with vitamin C and zinc (Immumax) in the management of the common cold.

PubMed

Yakoot, Mostafa; Salem, Amel

2011-01-12

To study the potential efficacy and tolerability of a natural multiherbal formula (Immumax) containing Echinacea extract 120 mg, garlic powder 100 mg, Nigella sativa oil 200 mg, and Panax ginseng extract 50 mg plus vitamin C 50 mg and elemental zinc 7.5 mg in the treatment of patients suffering from the common cold. The study was conducted in a prospective, double-blind, randomized, controlled study design in an outpatient setting. Sixty-two eligible patients with symptoms of the common cold were randomized to either Immumax or placebo treatment groups for the duration of their symptoms or a maximum of 14 days. Resolution rates were estimated using Kaplan-Meier analysis, and resolution profiles were compared between groups using the log-rank test. The mean percentage change in total symptom severity scores at days 4 and 8 from baseline were compared between the two groups by one-way analysis of variance (ANOVA). The median (interquartile range) time to resolution of all symptoms was 8 (5-9) days in the placebo group and 4 (3-6) days in the Immumax group. The results of the log-rank test indicate that symptoms resolved significantly faster in the Immumax group than in the placebo group (P < 0.001). The mean percentage reduction in total symptom severity scores from baseline at days 4 and 8 was significantly greater in the Immumax group than in the placebo group by one-way ANOVA (P < 0.01). We can conclude from our study that Immumax is helpful in reducing the duration and severity of common cold symptoms.

Interactive binocular treatment (I-BiT) for amblyopia: results of a pilot study of 3D shutter glasses system.

PubMed

Herbison, N; Cobb, S; Gregson, R; Ash, I; Eastgate, R; Purdy, J; Hepburn, T; MacKeith, D; Foss, A

2013-09-01

A computer-based interactive binocular treatment system (I-BiT) for amblyopia has been developed, which utilises commercially available 3D 'shutter glasses'. The purpose of this pilot study was to report the effect of treatment on visual acuity (VA) in children with amblyopia. Thirty minutes of I-BiT treatment was given once weekly for 6 weeks. Treatment sessions consisted of playing a computer game and watching a DVD through the I-BiT system. VA was assessed at baseline, mid-treatment, at the end of treatment, and at 4 weeks post treatment. Standard summary statistics and an exploratory one-way analysis of variance (ANOVA) were performed. Ten patients were enrolled with strabismic, anisometropic, or mixed amblyopia. The mean age was 5.4 years. Nine patients (90%) completed the full course of I-BiT treatment with a mean improvement of 0.18 (SD=0.143). Six out of nine patients (67%) who completed the treatment showed a clinically significant improvement of 0.125 LogMAR units or more at follow-up. The exploratory one-way ANOVA showed an overall effect over time (F=7.95, P=0.01). No adverse effects were reported. This small, uncontrolled study has shown VA gains with 3 hours of I-BiT treatment. Although it is recognised that this pilot study had significant limitations-it was unblinded, uncontrolled, and too small to permit formal statistical analysis-these results suggest that further investigation of I-BiT treatment is worthwhile.

Low-cycle fatigue of NiTi rotary instruments of various cross-sectional shapes.

PubMed

Cheung, G S P; Darvell, B W

2007-08-01

To compare the low-cycle fatigue (LCF) behaviour of some commercial NiTi instruments subjected to rotational bending, a deformation mode similar to an engine-file rotating in a curved root canal, using a strain-life analysis, in water. A total of 286 NiTi rotary instruments from four manufacturers were constrained into a curvature by three rigid, stainless steel pins whilst rotating at a rate of 250 rpm in deionized water until broken. The number of revolutions was recorded using an optical counter and an electronic break-detection circuit. The surface strain amplitude, calculated from the curvature (from a photograph) and diameter of the fracture cross-section (from a scanning electron micrograph), was plotted against the number of cycles to fracture for each instrument. A regression line was fitted to the LCF lives for each brand; the value was compared with that of others using one-way analysis of variance (ANOVA). The number of crack origins observed on the fractographic view was examined with chi-square for differences amongst various groups. A linear strain-life relationship, on logarithmic scales, was obtained for the LCF region with an apparent fatigue-ductility exponent ranging from -0.40 to -0.56. The number of crack-initiation sites, as observed on the fracture cross-section, differed between brands (chi(2), P < 0.05), but not LCF life (one-way ANOVA, P > 0.05). The LCF life of NiTi instruments declines with an inverse power function dependence on surface strain amplitude, but is not affected by the cross-sectional shape of the instrument.

A quantitative readability analysis of patient education resources from gastroenterology society websites.

PubMed

Hansberry, David R; Patel, Sahil R; Agarwal, Prateek; Agarwal, Nitin; John, Elizabeth S; John, Ann M; Reynolds, James C

2017-06-01

The lay public frequently access and rely on online information as a source of their medical knowledge. Many medical societies are unaware of national patient education material guidelines and subsequently fail to meet them. The goal of the present study was to evaluate the readability of patient education materials within the medical field of gastroenterology. Two hundred fourteen articles pertaining to patient education materials were evaluated with ten well-established readability scales. The articles were available on the websites for the American College of Gastroenterology (ACG), the American Gastroenterological Association (AGA), the American Society of Gastrointestinal Endoscopy (ASGE), the British Society of Gastroenterology (BSG), and the NIH section National Institute of Diabetes and Digestive and Kidney Diseases (NIDDK). One-way analysis of variance (ANOVA) and Tukey's honest significant difference (HSD) post hoc analysis were conducted to determine any differences in level of readability between websites. The 214 articles were written at an 11.8 ± 2.1 grade level with a range of 8.0 to 16.0 grade level. A one-way ANOVA and Tukey's HSD post hoc analysis determined the ACG was written at a significantly (p < 0.05) more difficult level when compared to the AGA, the BSG, and the NIDDK websites. No differences were noted when comparing the ASGE website. None of the patient education materials were written at a level that met national guidelines. If the materials are redrafted, the general American public will likely have a greater understanding of the gastroenterology content.

Effect of a lateral glide mobilisation with movement of the hip on vibration threshold in healthy volunteers.

PubMed

Smith, Darren A; Saranga, Jacob; Pritchard, Andrew; Kommatas, Nikolaos A; Punnoose, Shinu Kovelal; Kale, Supriya Tukaram

2018-01-01

Mulligan's mobilisation-with-movement (MWM) techniques are proposed to achieve their clinical benefit via neurophysiological mechanisms. However, previous research has focussed on responses in the sympathetic nervous system only, and is not conclusive. An alternative measure of neurophysiological response to MWM is required to support or refute this mechanism of action. Recently, vibration threshold (VT) has been used to quantify changes in the sensory nervous system in patients experiencing musculoskeletal pain. To investigate the effect of a lateral glide MWM of the hip joint on vibration threshold compared to a placebo and control condition in asymptomatic volunteers. Fifteen asymptomatic volunteers participated in this single-blinded, randomised, within-subject, placebo, control design. Participants received each of three interventions in a randomised order; a lateral glide MWM of the hip joint into flexion, a placebo MWM, and a control intervention. Vibration threshold (VT) measures were taken at baseline and immediately after each intervention. Mean change in VT from baseline was calculated for each intervention and then analysed for between group differences using a one-way analysis of variance (ANOVA). A one-way ANOVA revealed no statistically significant differences between the three experimental conditions (P = 0.812). This small study found that a lateral glide MWM of the hip did not significantly change vibration threshold compared to a placebo and control intervention in an asymptomatic population. This study provides a method of using vibration threshold to investigate the potential neurophysiological effects of a manual therapy intervention that should be repeated in a larger, symptomatic population. Copyright © 2016 Elsevier Ltd. All rights reserved.

Comparison of the frictional characteristics of aesthetic orthodontic brackets measured using a modified in vitro technique

PubMed Central

Arici, Nursel

2015-01-01

Objective The coefficients of friction (COFs) of aesthetic ceramic and stainless steel brackets used in conjunction with stainless steel archwires were investigated using a modified linear tribometer and special computer software, and the effects of the bracket slot size (0.018 inches [in] or 0.022 in) and materials (ceramic or metal) on the COF were determined. Methods Four types of ceramic (one with a stainless steel slot) and one conventional stainless steel bracket were tested with two types of archwire sizes: a 0.017 × 0.025-in wire in the 0.018-in slots and a 0.019 × 0.025-in wire in the 0.022-in slot brackets. For pairwise comparisons between the 0.018-in and 0.022-in slot sizes in the same bracket, an independent sample t-test was used. One-way and two-way analysis of variance (ANOVA) and Tukey's post-hoc test at the 95% confidence level (α = 0.05) were also used for statistical analyses. Results There were significant differences between the 0.022-in and 0.018-in slot sizes for the same brand of bracket. ANOVA also showed that both slot size and bracket slot material had significant effects on COF values (p < 0.001). The ceramic bracket with a 0.022-in stainless steel slot showed the lowest mean COF (µ = 0.18), followed by the conventional stainless steel bracket with a 0.022-in slot (µ = 0.21). The monocrystalline alumina ceramic bracket with a 0.018-in slot had the highest COF (µ = 0.85). Conclusions Brackets with stainless steel slots exhibit lower COFs than ceramic slot brackets. All brackets show lower COFs as the slot size increases. PMID:25667915

Influence of abutment material and luting cements color on the final color of all ceramics.

PubMed

Dede, Dogu Ömür; Armaganci, Arzu; Ceylan, Gözlem; Cankaya, Soner; Celik, Ersan

2013-11-01

The purpose of this study is to evaluate the effects of different abutment materials and luting cements color on the final color of implant-supported all-ceramic restorations. Ten A2 shade IPS e.max Press disc shape all-ceramic specimens were prepared (11 × 1.5 mm). Three different shades (translucent, universal and white opaque) of disc shape luting cement specimens were prepared (11 × 0.2 mm). Three different (zirconium, gold-palladium and titanium) implant abutments and one composite resin disc shape background specimen were prepared at 11 mm diameter and appropriate thicknesses. All ceramic specimens colors were measured with each background and luting cement samples on a teflon mold. A digital spectrophotometer used for measurements and data recorded as CIE L*a*b* color co-ordinates. An optical fluid applied on to the samples to provide a good optical connection and measurements on the composite resin background was saved as the control group. ΔE values were calculated from the ΔL, Δa and Δb values between control and test groups and data were analyzed with one-way variance analysis (ANOVA) and mean values were compared by the Tukey HSD test (α = 0.05). One-way ANOVA of ΔL, Δa, Δb and ΔE values of control and test groups revealed significant differences for backgrounds and seldom for cement color groups (p the 0.05). Only zirconium implant abutment groups and gold palladium abutment with universal shade cement group were found to be clinically acceptable (ΔE ≤ 3.0). Using titanium or gold-palladium abutments for implant supported all ceramics will be esthetically questionable and white opaque cement will be helpful to mask the dark color of titanium abutment.

Digital versus conventional techniques for pattern fabrication of implant-supported frameworks

PubMed Central

Alikhasi, Marzieh; Rohanian, Ahmad; Ghodsi, Safoura; Kolde, Amin Mohammadpour

2018-01-01

Objective: The aim of this experimental study was to compare retention of frameworks cast from wax patterns fabricated by three different methods. Materials and Methods: Thirty-six implant analogs connected to one-piece abutments were divided randomly into three groups according to the wax pattern fabrication method (n = 12). Computer-aided design/computer-aided manufacturing (CAD/CAM) milling machine, three-dimensional printer, and conventional technique were used for fabrication of waxing patterns. All laboratory procedures were performed by an expert-reliable technician to eliminate intra-operator bias. The wax patterns were cast, finished, and seated on related abutment analogs. The number of adjustment times was recorded and analyzed by Kruskal–Wallis test. Frameworks were cemented on the corresponding analogs with zinc phosphate cement and tensile resistance test was used to measure retention value. Statistical Analysis Used: One-way analysis of variance (ANOVA) and post hoc Tukey tests were used for statistical analysis. Level of significance was set at P < 0.05. Results: The mean retentive values of 680.36 ± 21.93 N, 440.48 ± 85.98 N, and 407.23 ± 67.48 N were recorded for CAD/CAM, rapid prototyping, and conventional group, respectively. One-way ANOVA test revealed significant differences among the three groups (P < 0.001). The post hoc Tukey test showed significantly higher retention for CAD/CAM group (P < 0.001), while there was no significant difference between the two other groups (P = 0.54). CAD/CAM group required significantly more adjustments (P < 0.001). Conclusions: CAD/CAM-fabricated wax patterns showed significantly higher retention for implant-supported cement-retained frameworks; this could be a valuable help when there are limitations in the retention of single-unit implant restorations. PMID:29657528

Digital versus conventional techniques for pattern fabrication of implant-supported frameworks.

PubMed

Alikhasi, Marzieh; Rohanian, Ahmad; Ghodsi, Safoura; Kolde, Amin Mohammadpour

2018-01-01

The aim of this experimental study was to compare retention of frameworks cast from wax patterns fabricated by three different methods. Thirty-six implant analogs connected to one-piece abutments were divided randomly into three groups according to the wax pattern fabrication method ( n = 12). Computer-aided design/computer-aided manufacturing (CAD/CAM) milling machine, three-dimensional printer, and conventional technique were used for fabrication of waxing patterns. All laboratory procedures were performed by an expert-reliable technician to eliminate intra-operator bias. The wax patterns were cast, finished, and seated on related abutment analogs. The number of adjustment times was recorded and analyzed by Kruskal-Wallis test. Frameworks were cemented on the corresponding analogs with zinc phosphate cement and tensile resistance test was used to measure retention value. One-way analysis of variance (ANOVA) and post hoc Tukey tests were used for statistical analysis. Level of significance was set at P < 0.05. The mean retentive values of 680.36 ± 21.93 N, 440.48 ± 85.98 N, and 407.23 ± 67.48 N were recorded for CAD/CAM, rapid prototyping, and conventional group, respectively. One-way ANOVA test revealed significant differences among the three groups ( P < 0.001). The post hoc Tukey test showed significantly higher retention for CAD/CAM group ( P < 0.001), while there was no significant difference between the two other groups ( P = 0.54). CAD/CAM group required significantly more adjustments ( P < 0.001). CAD/CAM-fabricated wax patterns showed significantly higher retention for implant-supported cement-retained frameworks; this could be a valuable help when there are limitations in the retention of single-unit implant restorations.

Enamel Wetness Effects on Microshear Bond Strength of Different Bonding Agents (Adhesive Systems): An in vitro Comparative Evaluation Study.

PubMed

Kulkarni, Girish; Mishra, Vinay K

2016-05-01

The purpose of this study was to compare the effect of enamel wetness on microshear bond strength using different adhesive systems. To evaluate microshear bond strength of three bonding agents on dry enamel; to evaluate microshear bond strength of three bonding agents on wet enamel; and to compare microshear bond strength of three different bonding agents on dry and wet enamel. Sixty extracted noncarious human premolars were selected for this study. Flat enamel surfaces of approximately 3 mm were obtained by grinding the buccal surfaces of premolars with water-cooled diamond disks. This study evaluated one etch-and-rinse adhesive system (Single Bond 2) and two self-etching adhesive systems (Clearfil SE Bond and Xeno-V). The specimens were divided into two groups (n = 30). Group I (dry) was air-dried for 30 seconds and in group II (wet) surfaces were blotted with absorbent paper to remove excess water. These groups were further divided into six subgroups (n = 10) according to the adhesives used. The resin composite, Filtek Z 250, was bonded to flat enamel surfaces that had been treated with one of the adhesives, following the manufacturer's instructions. After being stored in water at 37°C for 24 hours, bonded specimens were stressed in universal testing machine (Fig. 3) at a crosshead speed of 1 mm/min. The data were evaluated with one-way and two-way analysis of variance (ANOVA), t-test, and Tukey's Multiple Post hoc tests (a = 0.05). The two-way ANOVA and Tukey's Multiple Post hoc tests showed significant differences among adhesive systems, but wetness did not influence microshear bond strength (p = 0.1762). The one-way ANOVA and t-test showed that the all-in-one adhesive (Xeno-V) was the only material influenced by the presence of water on the enamel surface. Xeno-V showed significantly higher microshear bond strength when the enamel was kept wet. Single Bond 2 adhesive showed significantly higher microshear bond strength as compared with Xeno-V adhesive but no significant difference when compared with Clearfil SE Bond adhesive in dry enamel. Single Bond 2 adhesive showed no significant difference in microshear bond strength as compared with self-etching adhesive systems (Clearfil SE Bond and Xeno-V), when the enamel was kept wet. From the findings of the results, it was concluded that self-etching adhesives were not negatively affected by the presence of water on the enamel surface. The all-in-one adhesive showed different behavior depending on whether the enamel surface was dry or wet. So the enamel surface should not be desiccated, when self-etching adhesives are used.

Comparing the accuracy (trueness and precision) of models of fixed dental prostheses fabricated by digital and conventional workflows.

PubMed

Sim, Ji-Young; Jang, Yeon; Kim, Woong-Chul; Kim, Hae-Young; Lee, Dong-Hwan; Kim, Ji-Hwan

2018-03-31

This study aimed to evaluate and compare the accuracy. A reference model was prepared with three prepared teeth for three types of restorations: single crown, 3-unit bridge, and inlay. Stone models were fabricated from conventional impressions. Digital impressions of the reference model were created using an intraoral scanner (digital models). Physical models were fabricated using a three-dimensional (3D) printer. Reference, stone, and 3D printed models were subsequently scanned using an industrial optical scanner; files were exported in a stereolithography file format. All datasets were superimposed using 3D analysis software to evaluate the accuracy of the complete arch and trueness of the preparations. One-way and two-way analyses of variance (ANOVA) were performed to compare the accuracy among the three model groups and evaluate the trueness among the three types of preparation. For the complete arch, significant intergroup differences in precision were observed for the three groups (p<.001). However, no significant difference in trueness was found between the stone and digital models (p>.05). 3D printed models had the poorest accuracy. A two-way ANOVA revealed significant differences in trueness among the model groups (p<.001) and types of preparation (p<.001). Digital models had smaller root mean square values of trueness of the complete arch and preparations than stone models. However, the accuracy of the complete arch and trueness of the preparations of 3D printed models were inferior to those of the other groups. Copyright © 2018 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Evaluating the efficacy of a chemistry video game

NASA Astrophysics Data System (ADS)

Shapiro, Marina

A quasi-experimental design pre-test/post-test intervention study utilizing a within group analysis was conducted with 45 undergraduate college chemistry students that investigated the effect of implementing a game-based learning environment into an undergraduate college chemistry course in order to learn if serious educational games (SEGs) can be used to achieve knowledge gains of complex chemistry concepts and to achieve increase in students' positive attitude toward chemistry. To evaluate if students learn chemistry concepts by participating in a chemistry game-based learning environment, a one-way repeated measures analysis of variance (ANOVA) was conducted across three time points (pre-test, post-test, delayed post-test which were chemistry content exams). Results showed that there was an increase in exam scores over time. The results of the ANOVA indicated a statistically significant time effect. To evaluate if students' attitude towards chemistry increased as a result of participating in a chemistry game-based learning environment a paired samples t-test was conducted using a chemistry attitudinal survey by Mahdi (2014) as the pre- and post-test. Results of the paired-samples t-test indicated that there was no significant difference in pre-attitudinal scores and post-attitudinal scores.

LED Curing Lights and Temperature Changes in Different Tooth Sites

PubMed Central

Armellin, E.; Bovesecchi, G.; Coppa, P.; Pasquantonio, G.; Cerroni, L.

2016-01-01

Objectives. The aim of this in vitro study was to assess thermal changes on tooth tissues during light exposure using two different LED curing units. The hypothesis was that no temperature increase could be detected within the dental pulp during polymerization irrespective of the use of a composite resin or a light-curing unit. Methods. Caries-free human first molars were selected, pulp residues were removed after root resection, and four calibrated type-J thermocouples were positioned. Two LED lamps were tested; temperature measurements were made on intact teeth and on the same tooth during curing of composite restorations. The data was analyzed by one-way analysis of variance (ANOVA), Wilcoxon test, Kruskal-Wallis test, and Pearson's χ 2. After ANOVA, the Bonferroni multiple comparison test was performed. Results. Polymerization data analysis showed that in the pulp chamber temperature increase was higher than that without resin. Starlight PRO, in the same condition of Valo lamp, showed a lower temperature increase in pre- and intrapolymerization. A control group (without composite resin) was evaluated. Significance. Temperature increase during resin curing is a function of the rate of polymerization, due to the exothermic polymerization reaction, the energy from the light unit, and time of exposure. PMID:27195282

Influence of translucence/opacity and shade in the flexural strength of lithium disilicate ceramics

PubMed Central

Santos, Mila Oliveira; do Amaral, Flávia Lucisano Botelho; França, Fabiana Mantovani Gomes; Basting, Roberta Tarkany

2015-01-01

Background: Lithium disilicate ceramic system consists of glass ceramic ingots with different grades of translucence which may influence its flexural strength. Aims: To assess the three-point flexural strength of the different lithium disilicate-based ceramic ingots (IPS e.max Press/Ivoclar Vivadent) with different levels of translucence and shade. Materials and Methods: Six groups of ceramic ingots were selected to represent different levels of translucence and shade (HTA1, HTBL2, LTA2, LTB2, MO2, and HO). They measured 25 mm × 5 mm × 2 mm (n = 10), according to ISO 6872 specifications, and tested on a universal test machine (EMIC). Statistical Analysis Used: A one-way analysis of variance (ANOVA) was used (α = 0.05). Results: The results (in MPa) were: HTA1 = 392.98; HTBL2 = 390.74; LTA2 = 390.46; LTB2 = 389.92; MO2 = 390.43; HO = 391.96. ANOVA showed no significant difference among groups (P = 0.1528). Conclusions: Different levels of translucence, opacity and shade of ingots did not affect their mechanical strength, and the use of these ceramics should be guided by the esthetic demands of each clinical situation. PMID:26430304

Detection of burst suppression patterns in EEG using recurrence rate.

PubMed

Liang, Zhenhu; Wang, Yinghua; Ren, Yongshao; Li, Duan; Voss, Logan; Sleigh, Jamie; Li, Xiaoli

2014-01-01

Burst suppression is a unique electroencephalogram (EEG) pattern commonly seen in cases of severely reduced brain activity such as overdose of general anesthesia. It is important to detect burst suppression reliably during the administration of anesthetic or sedative agents, especially for cerebral-protective treatments in various neurosurgical diseases. This study investigates recurrent plot (RP) analysis for the detection of the burst suppression pattern (BSP) in EEG. The RP analysis is applied to EEG data containing BSPs collected from 14 patients. Firstly we obtain the best selection of parameters for RP analysis. Then, the recurrence rate (RR), determinism (DET), and entropy (ENTR) are calculated. Then RR was selected as the best BSP index one-way analysis of variance (ANOVA) and multiple comparison tests. Finally, the performance of RR analysis is compared with spectral analysis, bispectral analysis, approximate entropy, and the nonlinear energy operator (NLEO). ANOVA and multiple comparison tests showed that the RR could detect BSP and that it was superior to other measures with the highest sensitivity of suppression detection (96.49%, P = 0.03). Tracking BSP patterns is essential for clinical monitoring in critically ill and anesthetized patients. The purposed RR may provide an effective burst suppression detector for developing new patient monitoring systems.

LED Curing Lights and Temperature Changes in Different Tooth Sites.

PubMed

Armellin, E; Bovesecchi, G; Coppa, P; Pasquantonio, G; Cerroni, L

2016-01-01

Objectives. The aim of this in vitro study was to assess thermal changes on tooth tissues during light exposure using two different LED curing units. The hypothesis was that no temperature increase could be detected within the dental pulp during polymerization irrespective of the use of a composite resin or a light-curing unit. Methods. Caries-free human first molars were selected, pulp residues were removed after root resection, and four calibrated type-J thermocouples were positioned. Two LED lamps were tested; temperature measurements were made on intact teeth and on the same tooth during curing of composite restorations. The data was analyzed by one-way analysis of variance (ANOVA), Wilcoxon test, Kruskal-Wallis test, and Pearson's χ (2). After ANOVA, the Bonferroni multiple comparison test was performed. Results. Polymerization data analysis showed that in the pulp chamber temperature increase was higher than that without resin. Starlight PRO, in the same condition of Valo lamp, showed a lower temperature increase in pre- and intrapolymerization. A control group (without composite resin) was evaluated. Significance. Temperature increase during resin curing is a function of the rate of polymerization, due to the exothermic polymerization reaction, the energy from the light unit, and time of exposure.

Comparison of the Effect of Toothbrushing Education Via Video, Lecture and Pamphlet on the Dental Plaque Index of 12-Year-Old Children.

PubMed

Ramezaninia, Javad; Naghibi Sistani, Mohammad Mehdi; Ahangari, Zohreh; Gholinia, Hemmat; Jahanian, Iman; Gharekhani, Samaneh

2018-04-11

The aim of this study was to compare the effect of different modes of toothbrushing education (lecture, video and pamphlet) on the dental plaque index (PI) of adolescents. The cluster randomized intervention was performed on 128 participants aged 12 years, who were allocated into four groups based on the type of intervention. Group 1: no intervention; and groups 2, 3, 4: education via lecture, video, and pamphlet, respectively (n = 32). Their plaque index was measured at the baseline, 24 h and two months later. Data were analyzed by repeated measures analysis of variance (ANOVA), one-way ANOVA, independent and paired t-test. The plaque indices of groups 2, 3, 4 at 24 h (p values < 0.001) and two months (p values < 0.001) showed a significant reduction when compared to the baseline. The lowest PI score was observed in the pamphlet, video and lecture groups at 24 h, respectively. After 2 months, the lowest score of PI was measured in lecture, video and pamphlet groups, respectively; however, these differences were non-significant. Therefore, toothbrushing education via lecture, video and pamphlet reduced the dental plaque index with the same effectiveness.

Enhanced mannan-derived fermentable sugars of palm kernel cake by mannanase-catalyzed hydrolysis for production of biobutanol.

PubMed

Shukor, Hafiza; Abdeshahian, Peyman; Al-Shorgani, Najeeb Kaid Nasser; Hamid, Aidil Abdul; Rahman, Norliza A; Kalil, Mohd Sahaid

2016-10-01

Catalytic depolymerization of mannan composition of palm kernel cake (PKC) by mannanase was optimized to enhance the release of mannan-derived monomeric sugars for further application in acetone-butanol-ethanol (ABE) fermentation. Efficiency of enzymatic hydrolysis of PKC was studied by evaluating effects of PKC concentration, mannanase loading, hydrolysis pH value, reaction temperature and hydrolysis time on production of fermentable sugars using one-way analysis of variance (ANOVA). The ANOVA results revealed that all factors studied had highly significant effects on total sugar liberated (P<0.01). The optimum conditions for PKC hydrolysis were 20% (w/v) PKC concentration, 5% (w/w) mannanase loading, hydrolysis pH 4.5, 45°C temperature and 72h hydrolysis time. Enzymatic experiments in optimum conditions revealed total fermentable sugars of 71.54±2.54g/L were produced including 67.47±2.51g/L mannose and 2.94±0.03g/L glucose. ABE fermentation of sugar hydrolysate by Clostridium saccharoperbutylacetonicum N1-4 resulted in 3.27±1.003g/L biobutanol. Copyright © 2016 Elsevier Ltd. All rights reserved.

Developing the Noncentrality Parameter for Calculating Group Sample Sizes in Heterogeneous Analysis of Variance

ERIC Educational Resources Information Center

Luh, Wei-Ming; Guo, Jiin-Huarng

2011-01-01

Sample size determination is an important issue in planning research. In the context of one-way fixed-effect analysis of variance, the conventional sample size formula cannot be applied for the heterogeneous variance cases. This study discusses the sample size requirement for the Welch test in the one-way fixed-effect analysis of variance with…

Gross regional domestic product estimation: Application of two-way unbalanced panel data models to economic growth in East Nusa Tenggara province

NASA Astrophysics Data System (ADS)

Wibowo, Wahyu; Sinu, Elisabeth B.; Setiawan

2017-03-01

The condition of East Nusa Tenggara Province which recently developed new districts can affect the number of information or data collected become unbalanced. One of the consequences of ignoring the data incompleteness is the estimator become not valid. Therefore, the analysis of unbalanced panel data is very crucial.The aim of this paper is to find the estimation of Gross Regional Domestic Product in East Nusa Tenggara Province using unbalanced panel data regression model for two-way error component which assume random effect model (REM). In this research, we employ Feasible Generalized Least Squares (FGLS) as regression coefficients estimation method. Since variance of the model is unknown, ANOVA method is considered to obtain the variance components in order to construct the variance-covariance matrix. The data used in this research is secondary data taken from Central Bureau of Statistics of East Nusa Tenggara Province in 21 districts period 2004-2013. The predictors are the number of labor over 15 years old (X1), electrification ratios (X2), and local revenues (X3) while Gross Regional Domestic Product based on constant price 2000 is the response (Y). The FGLS estimation result shows that the value of R2 is 80,539% and all the predictors chosen are significantly affect (α = 5%) the Gross Regional Domestic Product in all district of East Nusa Tenggara Province. Those variables are the number of labor over 15 years old (X1), electrification ratios (X2), and local revenues (X3) with 0,22986, 0,090476, and 0,14749 of elasticities, respectively.

Multiple comparison analysis testing in ANOVA.

PubMed

McHugh, Mary L

2011-01-01

The Analysis of Variance (ANOVA) test has long been an important tool for researchers conducting studies on multiple experimental groups and one or more control groups. However, ANOVA cannot provide detailed information on differences among the various study groups, or on complex combinations of study groups. To fully understand group differences in an ANOVA, researchers must conduct tests of the differences between particular pairs of experimental and control groups. Tests conducted on subsets of data tested previously in another analysis are called post hoc tests. A class of post hoc tests that provide this type of detailed information for ANOVA results are called "multiple comparison analysis" tests. The most commonly used multiple comparison analysis statistics include the following tests: Tukey, Newman-Keuls, Scheffee, Bonferroni and Dunnett. These statistical tools each have specific uses, advantages and disadvantages. Some are best used for testing theory while others are useful in generating new theory. Selection of the appropriate post hoc test will provide researchers with the most detailed information while limiting Type 1 errors due to alpha inflation.

[Analysis of variance of repeated data measured by water maze with SPSS].

PubMed

Qiu, Hong; Jin, Guo-qin; Jin, Ru-feng; Zhao, Wei-kang

2007-01-01

To introduce the method of analyzing repeated data measured by water maze with SPSS 11.0, and offer a reference statistical method to clinical and basic medicine researchers who take the design of repeated measures. Using repeated measures and multivariate analysis of variance (ANOVA) process of the general linear model in SPSS and giving comparison among different groups and different measure time pairwise. Firstly, Mauchly's test of sphericity should be used to judge whether there were relations among the repeatedly measured data. If any (P

Antinociceptive and anticonvulsant activities of hydroalcoholic extract of Jasminum grandiflorum (jasmine) leaves in experimental animals.

PubMed

Gupta, Rajesh K; Reddy, Pooja S

2013-10-01

Jasminum grandiflorum belongs to the family Oleaceae and is known to have anti-inflammatory, antimicrobial, antioxidant, and antiulcer activities. The present study was undertaken to study its analgesic and anticonvulsant effects in rats and mice. The antinociceptive activity of the hydroalcoholic extract of J. grandiflorum leaves (HEJGL) was studied using tail flick and acetic acid - induced writhing method. Similarly, its anticonvulsant activity was observed by maximal electroshock (MES) method and pentylenetetrazol (PTZ) method. Statistical analysis was performed using one-way analysis of variance (ANOVA) followed by Dunnett's test. At doses of 50, 100, and 200 mg/kg, HEJGL showed significant analgesic and anticonvulsant effects in experimental animals. In view of its analgesic and anticonvulsant activity, the JGL extract can be used in painful conditions as well as in seizure disorders.

Antinociceptive and anticonvulsant activities of hydroalcoholic extract of Jasminum grandiflorum (jasmine) leaves in experimental animals

PubMed Central

Gupta, Rajesh K.; Reddy, Pooja S.

2013-01-01

Jasminum grandiflorum belongs to the family Oleaceae and is known to have anti-inflammatory, antimicrobial, antioxidant, and antiulcer activities. The present study was undertaken to study its analgesic and anticonvulsant effects in rats and mice. The antinociceptive activity of the hydroalcoholic extract of J. grandiflorum leaves (HEJGL) was studied using tail flick and acetic acid – induced writhing method. Similarly, its anticonvulsant activity was observed by maximal electroshock (MES) method and pentylenetetrazol (PTZ) method. Statistical analysis was performed using one-way analysis of variance (ANOVA) followed by Dunnett's test. At doses of 50, 100, and 200 mg/kg, HEJGL showed significant analgesic and anticonvulsant effects in experimental animals. In view of its analgesic and anticonvulsant activity, the JGL extract can be used in painful conditions as well as in seizure disorders. PMID:24174823

Comparative study between different simple methods manipulating ratio spectra for the analysis of alogliptin and metformin co-formulated with highly different concentrations

NASA Astrophysics Data System (ADS)

Zaghary, Wafaa A.; Mowaka, Shereen; Hassan, Mostafa A.; Ayoub, Bassam M.

2017-11-01

Different simple spectrophotometric methods were developed for simultaneous determination of alogliptin and metformin manipulating their ratio spectra with successful application on recently approved combination, Kazano® tablets. Spiking was implemented to detect alogliptin in spite of its low contribution in the pharmaceutical formulation as low quantity in comparison to metformin. Linearity was acceptable over the concentration range of 2.5-25.0 μg/mL and 2.5-15.0 μg/mL for alogliptin and metformin, respectively using derivative ratio, ratio subtraction coupled with extended ratio subtraction and spectrum subtraction coupled with constant multiplication. The optimized methods were compared using one-way analysis of variance (ANOVA) and proved to be accurate for assay of the investigated drugs in their pharmaceutical dosage form.

Visual analysis of variance: a tool for quantitative assessment of fMRI data processing and analysis.

PubMed

McNamee, R L; Eddy, W F

2001-12-01

Analysis of variance (ANOVA) is widely used for the study of experimental data. Here, the reach of this tool is extended to cover the preprocessing of functional magnetic resonance imaging (fMRI) data. This technique, termed visual ANOVA (VANOVA), provides both numerical and pictorial information to aid the user in understanding the effects of various parts of the data analysis. Unlike a formal ANOVA, this method does not depend on the mathematics of orthogonal projections or strictly additive decompositions. An illustrative example is presented and the application of the method to a large number of fMRI experiments is discussed. Copyright 2001 Wiley-Liss, Inc.

Influence of training and competitive sessions on peripheral β-endorphin levels in training show jumping horses

PubMed Central

Cravana, Cristina; Medica, P.; Ragonese, G.; Fazio, E.

2017-01-01

Aim: To investigate the effects of training sessions on circulating β-endorphin changes in sport horses before and after competition and to ascertain whether competition would affect this response. Materials and Methods: A total of 24 trained jumping horses were randomly assigned to one of two training groups: Group A (competing) and Group B (not competing). To determined plasma β-endorphin concentrations, two pre- and post-competition training weeks at aerobic workout and two competitive show jumping event days at anaerobic workout were measured before, 5 and 30 min after exercise. Exercise intensity is described using lactate concentrations and heart rate. The circuit design, intensity, and duration of training sessions were the same for both groups. Results: In Group A, one-way analysis of variance for repeated measures (RM-ANOVA) showed significant effects of exercise on β-endorphin changes (F=14.41; p<0.001), only in the post-competition training sessions, while in Group B showed no significant effects. Two-way RM-ANOVA showed, after post-competition training sessions, a significant difference between Group A and Group B (F=6.235; p=0.023), with higher β-endorphin changes in Group A, compared to Group B. During the competitive show jumping sessions, one-way RM ANOVA showed significant effects of exercise on β-endorphin changes (F=51.10; p<0.001). The statistical analysis, in Group A, showed a significant difference between post-competition training and competitive exercise (F=6.32; p=0.024) with higher β-endorphin values in competitive sessions compared to those of post-competition training. Conclusion: Lactate concentrations seem to be the main factors being correlated with the raise of β-endorphin during anaerobic exercise of competitive events. Exercise of low intensity, as well as that one of training sessions, does not appear to stimulate a significant increased release of β-endorphin and it may depend on the duration of the exercise program. Moreover, the responses during exercise in the course of post-competition training sessions seem to be significantly different from those the pre-competition training. These data show that the preliminary competitive stress induced additional significant changes of β-endorphin pattern. It would reflect the need of a long-lasting modulation of fatigue and pain perception related to the effect of an additional physical and mental effort for the consecutive competitive and training sessions. PMID:28246449

Plasma iron levels appraised 15 days after spinal cord injury in a limb movement animal model.

PubMed

Reis, F M; Esteves, A M; Tufik, S; de Mello, M T

2011-03-01

Experimental, controlled trial. The purpose of this study was to evaluate plasma iron and transferrin levels in a limb movement animal model with spinal cord injury (SCI). Universidade Federal de São Paulo, Departamento de Psicobiologia. In all, 72 male Wistar rats aged 90 days were divided into four groups: (1) acute SCI (1 day, SCI1), (2) 3 days post-SCI (SCI3), (3) 7 days post-SCI (SCI7) and (4) 15 days post-SCI (SCI15). Each of these groups had corresponding control (CTRL) and SHAM groups. Plasma iron and transferrin levels of the different groups were analyzed using a one-way analysis of variance (ANOVA) followed by Tukey's test. We found a significant reduction in iron plasma levels after SCI compared with the CTRL group: SCI1 (CTRL: 175±10.58 μg dl(-1); SCI: 108.28±11.7 μg dl(-1)), SCI3 (CTRL: 195.5±11.00 μg dl(-1); SCI: 127.88±12.63 μg dl(-1)), SCI7 (CTRL: 186±2.97 μg dl(-1); SCI: 89.2±15.39 μg dl(-1)) and SCI15 (CTRL: 163±5.48 μg dl(-1); SCI: 124.44±10.30 μg dl(-1)) (P<0.05; ANOVA). The SHAM1 group demonstrated a reduction in iron plasma after acute SCI (CTRL: 175±10.58 μg dl(-1); SHAM: 114.60±7.81 μg dl(-1)) (P<0.05; ANOVA). Reduced iron metabolism after SCI may be one of the mechanisms involved in the pathogenesis of sleep-related movement disorders.

Comparing the efficacy of mydriatic cocktail-soaked sponge and conventional pupil dilation in patients using tamsulosin – a randomized controlled trial

PubMed Central

2013-01-01

Background A strong association exists between the use of tamsulosin and the occurance of intraoperative floppy iris syndrome. Several methods were advocated to overcome the progressive intraopertive miosis. Our purpose was to investigate the effect of a mydriatic-cocktail soaked cellulose sponge on perioperative pupil diameter in tamsulosin-treated patients undergoing elective cataract surgery. Methods Patients using tamsulosin were dilated either with mydriatic-cocktail soaked sponge (group 1) or with conventional eyedrop regimen (group 2). Control patients not taking any α1 adrenergic receptor inhibtors were also dilated with mydriatic sponge (group 3). In all groups oxybuprocain 0.4%, cocain 4%, tropicamide 1%, phenylephrine 10%, diclophenac 0.1% along with chloramphenicol 0.5% were used preoperatively. Pupil diameter (mm) was measured preoperatively, after nucleus delivery, and before IOL implantation. Adverse effects associated with the use of sponge, minor and major intraoperative complications, the use of iris retractors and operation time were recorded. Differences in general between groups were analyzed with a one way analysis of variance (ANOVA); differences between groups in proportions were assessed by Fisher’s exact test. Results Mean pupil diameter (mm) was preopertively: 7.52 ± 1.21, 7.30 ± 1.55 and 7.99 ± 0.96 (ANOVA: p = 0.079); after nucleus delivery: 6 ± 1.20, 6.29 ± 1.12 and 6.52 ± 0.81 (ANOVA: p = 0.123); before IOL implantation: 5.46 ± 1.06, 5.83 ± 1.09 and 6.17 ± 0.89 (ANOVA: p = 0.0291). No adverse effect related to sponge use was detected. Frequency of minor complications, and iris hook use was similar in the two tamsulosin treated group. Operation time did not differ significantly in the three groups. Conclusion We have found that using a mydriatic cocktail-soaked wick – an alternative way to achieve intraoperative mydriasis for cataract surgery – was as effective and safe as the conventional repeated eyedrops regiment for tamsulosin treated patients. Trial registration Current Controlled Trials ISRCTN37834752 PMID:24359572

The Effects of Active Videogame Feedback and Practicing Experience on Children's Physical Activity Intensity and Enjoyment.

PubMed

Chen, Han; Sun, Haichun

2017-08-01

The study aims to explore the effects of receiving active videogame (AVG) feedback and playing experience on individuals' moderate-to-vigorous physical activity (MVPA) and perceived enjoyment. This was a within-subject design study. The participants included 36 (n = 15 and 21 for boys and girls, respectively) fourth graders enrolled in a rural elementary school in southern Georgia area. The experiment lasted for 6 weeks with each week including three sessions. The participants were assigned in either front row (sensor feedback) or back row (no sensor feedback) during practice, which was alternated in different sessions. Two different dance games were played during the study with each game implemented for 3 weeks. The MVPA was measured with GT3X+ accelerometers. Physical activity (PA) enjoyment was assessed after the completion of the first two and last two sessions of each game. A repeated one-way ANOVA (analysis of variance) was used to examine the effects of AVG feedback and game on MVPA. A repeated one-way MANOVA (multivariate analysis of variance) was conducted for each game to examine the effects of experience and AVG feedback on enjoyment and MVPA. No effects of AVG feedback were found for MVPA or enjoyment (P > 0.05). The effects of experience on MVPA were found for Just Dance Kids 2014 with experience decreased MVPA (P < 0.05). Students who practiced dance AVG without receiving feedback still demonstrated positive affection and accumulated similar MVPA than when practicing while receiving feedback. Experience for certain dance games tends to decrease PA intensity.

Knowledge and Attitudes toward HIV, Hepatitis B Virus, and Hepatitis C Virus Infection among Health-care Workers in Malawi.

PubMed

Mtengezo, Jasintha; Lee, Haeok; Ngoma, Jonathan; Kim, Susie; Aronowitz, Teri; DeMarco, Rosanna; Shi, Ling

2016-01-01

The highest prevalence of HIV infection occurs in Sub-Saharan Africa and hepatitis B virus (HBV), and hepatitis C virus (HCV) prevalence are the second highest in Sub-Saharan Africa including Malawi. Health-care workers (HCWs) play an important role in the prevention of, response to, and management of these infectious diseases. There is, however, no published research about the level of knowledge and attitudes toward HIV, HBV, and HCV infection among Malawian HCWs. The purpose of this study was to explore and determine the knowledge of and attitudes toward HIV, HBV, and HCV among a targeted population of Malawian HCWs. A cross-sectional community-based participatory research with 194 HCWs was completed employing health survey method. The project was a collaborative effort between nursing faculties in the USA and Malawian. A one-way analysis of variance (ANOVA) with the Bonferroni adjustment for multiple comparisons was used to assess the differences in knowledge and attitude among three subgroups of HCWs. Of 194 of Malawian HCWs surveyed, 41% were support staff, 37% were nursing students, and 22% were health-care professionals. Both health-care professionals and support staff had high knowledge scores related to HIV/AIDS, and their attitudes were mainly positive. However, a series of one-way ANOVAs revealed significant differences in knowledge and attitude toward HIV/AIDs, HBV, and HCV among HCWs ( P < 0.01). The majority had less knowledge about HBV and HCV and more negative attitudes toward hepatitis. This study highlights the ongoing need for reducing negative attitudes toward HIV, HBV, and HCV; and providing health education among HCWs, especially focusing on HBV and HCV prevention. The findings of the research project can be used to develop interventions addressing low HBV- and HCV-related knowledge and attitudes.

Relationship between career motivation and perceived spiritual leadership in health professional educators: a correlational study in Iran.

PubMed

Sadeghifar, Jamil; Bahadori, Mohammadkarim; Baldacchino, Donia; Raadabadi, Mehdi; Jafari, Mehdi

2013-12-20

Career motivation in university educators through efficient ways and appropriate with the educational system, is considered one of the important factors affecting education of students and their competence. This study aimed to determine the relationship between career motivation and spiritual leadership among a university of medical sciences in the west, Iran. This descriptive, cross-sectional correlation study was conducted among the university educators of medical sciences in the west, Iran in 2012. All of the educators (N=230) were selected and recruited according to census method. The data were collected by two established self-completed questionnaires on spiritual leadership (SL) and career motivation. Data were analyzed statistically by parametric tests: Pearson correlation, independent student t-test and one-way analysis of variance (ANOVA). The Pearson correlation test identified a significant relationship between educators' career motivation and vision, altruistic love, hope/faith, meaning/calling and membership dimensions of spiritual leadership (p<0.05). The independent t-test detected a significant relationship between the 'hope/faith' (p=0.04) and organizational commitment (p=0.004) dimensions and the gender of educators. ANOVA revealed significant differences in educators' years of work experience and their overall career motivation (p=0.003) and the dimension of 'membership' (p<0.04). A significant relationship was found in 'altruistic love' and 'Hope/faith', and the educators' academic rank place in the university (p=0.03). Also a significant relationship was found in 'vision' (p=0.03) and 'altruistic love' (p=0.002) and 'membership' (p=0.04) dimensions, and the type of faculty. The results indicate that the dimensions of existence of spiritual leadership may have a positive relationship with educators' career motivation.

Relationship between Career Motivation and Perceived Spiritual Leadership in Health Professional Educators: A Correlational Study in Iran

PubMed Central

Sadeghifar, Jamil; Bahadori, Mohammadkarim; Baldacchino, Donia; Raadabadi, Mehdi; Jafari, Mehdi

2014-01-01

Background and Aims: Career motivation in university educators through efficient ways and appropriate with the educational system, is considered one of the important factors affecting education of students and their competence. This study aimed to determine the relationship between career motivation and spiritual leadership among a university of medical sciences in the west, Iran. Methods: This descriptive, cross-sectional correlation study was conducted among the university educators of medical sciences in the west, Iran in 2012. All of the educators (N=230) were selected and recruited according to census method. The data were collected by two established self-completed questionnaires on spiritual leadership (SL) and career motivation. Data were analyzed statistically by parametric tests: Pearson correlation, independent student t-test and one-way analysis of variance (ANOVA). Results: The Pearson correlation test identified a significant relationship between educators’ career motivation and vision, altruistic love, hope/faith, meaning/calling and membership dimensions of spiritual leadership (p<0.05). The independent t-test detected a significant relationship between the ‘hope/faith’ (p=0.04) and organizational commitment (p=0.004) dimensions and the gender of educators. ANOVA revealed significant differences in educators’ years of work experience and their overall career motivation (p=0.003) and the dimension of ‘membership’ (p<0.04). A significant relationship was found in ‘altruistic love’ and ‘Hope/faith’, and the educators’ academic rank place in the university (p=0.03). Also a significant relationship was found in ‘vision’ (p=0.03) and ‘altruistic love’ (p=0.002) and ‘membership’ (p=0.04) dimensions, and the type of faculty. Conclusion: The results indicate that the dimensions of existence of spiritual leadership may have a positive relationship with educators’ career motivation. PMID:24576374

Effects of streptozotocin-induced diabetes on bladder and erectile (dys)function in the same rat in vivo.

PubMed

Christ, George J; Hsieh, Yi; Zhao, Weixin; Schenk, Gregory; Venkateswarlu, Karicheti; Wang, Hong-Zhan; Tar, Moses T; Melman, Arnold

2006-05-01

To establish the methods, feasibility and utility of evaluating the impact of diabetes on bladder and erectile function in the same rat, as more than half of diabetic patients have bladder dysfunction, and half of diabetic men have erectile dysfunction, but the severity of coincident disease has not been rigorously assessed. In all, 16 F-344 rats had diabetes induced by streptozotocin (STZ), and were divided into insulin-treated (five) and untreated (11), and compared with age-matched controls (10), all assessed in parallel. All STZ rats were diabetic for 8-11 weeks. Cystometric studies were conducted on all rats, with cavernosometric studies conducted on a subset of rats. There were insulin-reversible increases in the following cystometric variables; bladder weight, bladder capacity, micturition volume, residual volume, micturition pressure and spontaneous activity (P < 0.05, in all, one-way analysis of variance, anova). Cavernosometry showed a diabetes-related, insulin-reversible decline in the cavernosal nerve-stimulated intracavernosal pressure (ICP) response at all levels of current stimulation (P < 0.05, in all one-way anova). Plotting erectile capacity (i.e. ICP) against bladder capacity showed no correlation between the extent of the decline in erectile capacity and the magnitude of the increase in bladder capacity. These studies extend previous work to indicate that the extent of diabetes-related bladder and erectile dysfunction can vary in the same rat. As such, these findings highlight the importance of evaluating the impact of diabetes on multiple organ systems in the lower urinary tract. Future studies using this model system should lead to a better understanding of the initiation, development, progression and coincidence of these common diabetic complications.

Comparison of fracture resistance between cast, CAD/CAM milling, and direct metal laser sintering metal post systems.

PubMed

Bilgin, Mehmet Selim; Erdem, Ali; Dilber, Erhan; Ersoy, İbrahim

2016-01-01

The purpose of this study was to compare the fracture resistance of Co-Cr post-cores fabricated with 3 different techniques: traditional casting (TC), computer-aided design and manufacturing (CAD/CAM) milling (CCM) and direct metal laser sintering (DMLS). Forty intact human mandibular premolar were endodontically treated. The roots were then randomly divided into four groups according to the post systems: the control group was only filled with gutta percha. Co-Cr metal posts were fabricated with TC, CCM and DMLS in the other three groups. The posts were luted with a resin cement and subjected to compression test at a crosshead speed of 1mm/min. The statistical analysis of the data was performed using one-way analysis of variance (ANOVA) and multiple comparison post hoc Tukey tests (α=.05). The samples were examined under a stereomicroscope with ×20 magnification for the evaluation of the fracture types. The mean fracture loads were 432.69 N for control, 608.89 N for TC, 689.40 N for DMLS and 959.26 N for CCM. One-way ANOVA revealed significant difference between the groups (p<0.01). In the post hoc Tukey test, there were significant differences between groups except DMLS and TC. While Co-Cr posts fabricated by TC and DMLS systems performed similarly in terms of fracture resistance, posts fabricated by CCM techniques showed higher fracture resistance values. Co-Cr metal posts fabricated by CCM and DMLS could be an alternative to TC processing in daily clinical application. Copyright © 2015 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Marginal fit of all-ceramic crowns fabricated using two extraoral CAD/CAM systems in comparison with the conventional technique.

PubMed

Alqahtani, Fawaz

2017-01-01

The purpose of this study was to determine the effect of two extraoral computer-aided design (CAD) and computer-aided manufacturing (CAM) systems, in comparison with conventional techniques, on the marginal fit of monolithic CAD/CAM lithium disilicate ceramic crowns. This is an in vitro interventional study. The study was carried out at the Department of Prosthodontics, School of Dentistry, Prince Sattam Bin Abdul-Aziz University, Saudi Arabia, from December 2015 to April 2016. A marginal gap of 60 lithium disilicate crowns was evaluated by scanning electron microscopy. In total, 20 pressable lithium disilicate (IPS e.max Press [Ivoclar Vivadent]) ceramic crowns were fabricated using the conventional lost-wax technique as a control group. The experimental all-ceramic crowns were produced based on a scan stone model and milled using two extraoral CAD/CAM systems: the Cerec group was fabricated using the Cerec CAD/CAM system, and the Trios group was fabricated using Trios CAD and milled using Wieland Zenotec CAM. One-way analysis of variance (ANOVA) and the Scheffe post hoc test were used for statistical comparison of the groups (α=0.05). The mean (±standard deviation) of the marginal gap of each group was as follows: the Control group was 91.15 (±15.35) µm, the Cerec group was 111.07 (±6.33) µm, and the Trios group was 60.17 (±11.09) µm. One-way ANOVA and the Scheffe post hoc test showed a statistically significant difference in the marginal gap between all groups. It can be concluded from the current study that all-ceramic crowns, fabricated using the CAD/CAM system, show a marginal accuracy that is acceptable in clinical environments. The Trios CAD group displayed the smallest marginal gap.

An evaluation of shear bond strength of self-etch adhesive on pre-etched enamel: an in vitro study.

PubMed

Rao, Bhadra; Reddy, Satti Narayana; Mujeeb, Abdul; Mehta, Kanchan; Saritha, G

2013-11-01

To determine the shear bond strength of self-etch adhesive G-bond on pre-etched enamel. Thirty caries free human mandibular premolars extracted for orthodontic purpose were used for the study. Occlusal surfaces of all the teeth were flattened with diamond bur and a silicon carbide paper was used for surface smoothening. The thirty samples were randomly grouped into three groups. Three different etch systems were used for the composite build up: group 1 (G-bond self-etch adhesive system), group 2 (G-bond) and group 3 (Adper single bond). Light cured was applied for 10 seconds with a LED unit for composite buildup on the occlusal surface of each tooth with 8 millimeters (mm) in diameter and 3 mm in thickness. The specimens in each group were tested in shear mode using a knife-edge testing apparatus in a universal testing machine across head speed of 1 mm/ minute. Shear bond strength values in Mpa were calculated from the peak load at failure divided by the specimen surface area. The mean shear bond strength of all the groups were calculated and statistical analysis was carried out using one-way Analysis of Variance (ANOVA). The mean bond strength of group 1 is 15.5 Mpa, group 2 is 19.5 Mpa and group 3 is 20.1 Mpa. Statistical analysis was carried out between the groups using one-way ANOVA. Group 1 showed statistically significant lower bond strength when compared to groups 2 and 3. No statistical significant difference between groups 2 and 3 (p < 0.05). Self-etch adhesive G-bond showed increase in shear bond strength on pre-etched enamel.

The Grapefruit: An Alternative Arthroscopic Tool Skill Platform.

PubMed

Molho, David A; Sylvia, Stephen M; Schwartz, Daniel L; Merwin, Sara L; Levy, I Martin

2017-08-01

To establish the construct validity of an arthroscopic training model that teaches arthroscopic tool skills including triangulation, grasping, precision biting, implant delivery and ambidexterity and uses a whole grapefruit for its training platform. For the grapefruit training model (GTM), an arthroscope and arthroscopic instruments were introduced through portals cut in the grapefruit skin of a whole prepared grapefruit. After institutional review board approval, participants performed a set of tasks inside the grapefruit. Performance for each component was assessed by recording errors, achievement of criteria, and time to completion. A total of 19 medical students, orthopaedic surgery residents, and fellowship-trained orthopaedic surgeons were included in the analysis and were divided into 3 groups based on arthroscopic experience. One-way analysis of variance (ANOVA) and the post hoc Tukey test were used for statistical analysis. One-way ANOVA showed significant differences in both time to completion and errors between groups, F(2, 16) = 16.10, P < .001; F(2, 16) = 17.43, P < .001. Group A had a longer time to completion and more errors than group B (P = .025, P = .019), and group B had a longer time to completion and more errors than group C (P = .023, P = .018). The GTM is an easily assembled and an alternative arthroscopic training model that bridges the gap between box trainers, cadavers, and virtual reality simulators. Our findings suggest construct validity when evaluating its use for teaching the basic arthroscopic tool skills. As such, it is a useful addition to the arthroscopic training toolbox. There is a need for validated low-cost arthroscopic training models that are easily accessible. Copyright © 2017 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Timing considerations on the shear bond strength of orthodontic brackets after topical fluoride varnish applications

PubMed Central

Cossellu, Gianguido; Lanteri, Valentina; Butera, Andrea; Laffi, Nicola; Merlini, Alberto; Farronato, Giampietro

2017-01-01

Objectives: To assess the best temporal association between the application of a fluoride varnish on enamel and bonding procedures. Materials and Methods: Eighty mandibular bovine incisors were used. Teeth were divided into 4 groups (20 per group); Groups 1–3 were treated with fluoride varnish (Fluor Protector, Ivoclar Vivadent, Schaan, Liechtenstein), and Group 4 served as control with no pretreatment. Tooth were stored in deionized water (37°C) and subjected to thermal cycling for 400 (Group 1), 800 (Group 2), and 2500 (Group 3) cycles corresponding, respectively, to 15, 30, and 90 days in order to simulate the three different timing of bracket bonding. Shear bond strength (SBS) was measured using an Instron Universal Testing machine. Tooth surfaces were examined under a stereomicroscope at 10× magnification to assess the amount of adhesive remnant index (ARI). One-way analysis of variance (ANOVA) and Tukey's honestly significant difference post-hoc test were used for the comparison of SBS values between groups (P < 0.05). The Chi-square test was used to examine differences among ARI scores. (P < 0.05). Results: One-way ANOVA and Tukey post-hoc test showed that the SBS of different groups were significantly different and was impacted by different timing of bonding (P < 0.05). The main differences were between the control group (17.02 ± 6.38 MPa) and Group 1 (6.93 ± 4.3 MPa). The ARI scores showed that there were no significant differences between the four tested groups. Conclusions: The SBS of the brackets bonded 15 days after the application of the fluoride was set back to an optimal value. PMID:28197397

The use of analysis of variance procedures in biological studies

USGS Publications Warehouse

Williams, B.K.

1987-01-01

The analysis of variance (ANOVA) is widely used in biological studies, yet there remains considerable confusion among researchers about the interpretation of hypotheses being tested. Ambiguities arise when statistical designs are unbalanced, and in particular when not all combinations of design factors are represented in the data. This paper clarifies the relationship among hypothesis testing, statistical modelling and computing procedures in ANOVA for unbalanced data. A simple two-factor fixed effects design is used to illustrate three common parametrizations for ANOVA models, and some associations among these parametrizations are developed. Biologically meaningful hypotheses for main effects and interactions are given in terms of each parametrization, and procedures for testing the hypotheses are described. The standard statistical computing procedures in ANOVA are given along with their corresponding hypotheses. Throughout the development unbalanced designs are assumed and attention is given to problems that arise with missing cells.

Consequences of Assumption Violations Revisited: A Quantitative Review of Alternatives to the One-Way Analysis of Variance "F" Test.

ERIC Educational Resources Information Center

Lix, Lisa M.; And Others

1996-01-01

Meta-analytic techniques were used to summarize the statistical robustness literature on Type I error properties of alternatives to the one-way analysis of variance "F" test. The James (1951) and Welch (1951) tests performed best under violations of the variance homogeneity assumption, although their use is not always appropriate. (SLD)

Degradation of Organic Matter from Stabilized Leachate by Using Zinc Sulphate as Coagulant Agent

NASA Astrophysics Data System (ADS)

Kamaruddin, M. A.; Yusoff, MS; Adam, N. H.; Maz, M. R. R.; Abdullah, M. M. A. B.; Alrozi, R.; Zawawi, M. H.

2018-06-01

Stabilized landfill leachate often contains higher organic fractions than the young one. The organics require several sequential treatments to render the leachate parameters concentrations to permissible discharge limits before being discharged to receiving water. This study focused on the application of Zinc Sulphate (ZnSO4) as coagulant agent followed with microfiltration of 0.45 µm pore size under different condition of landfill leachates. The results indicated that the sludge volume index (SVI), soluble COD and turbidity concentrations were inter-related to each other when compared under different ZnSO4 dosages. However, that was not the case when correlation between stabilized and young leachate were compared side by side. To conform the finding, one-way analysis of variance (ANOVA) was conducted and the results were further explained by the adequacy and significant of confidence interval. Finally, it was proven that, soluble and particulate COD had significant CI of 95% applicable for stabilized leachate alone.

The Impact of Advanced Placement Courses on High School Students Taking the Scholastic Aptitude Test.

ERIC Educational Resources Information Center

Thomas, L. M.; Thomas, Suzanne G.

This obtrusive post-hoc quasi-experimental study investigated Scholastic Assessment Test (SAT) scores of 111 high school students in grades 10 through 12. Fifty-three students were enrolled in at least one Advanced Placement (AP) course at the time of the study. General factorial analysis of variance (ANOVA) tested for significant differences…

Multiple Regression as a Flexible Alternative to ANOVA in L2 Research

ERIC Educational Resources Information Center

Plonsky, Luke; Oswald, Frederick L.

2017-01-01

Second language (L2) research relies heavily and increasingly on ANOVA (analysis of variance)-based results as a means to advance theory and practice. This fact alone should merit some reflection on the utility and value of ANOVA. It is possible that we could use this procedure more appropriately and, as argued here, other analyses such as…

Application of one-way ANOVA in completely randomized experiments

NASA Astrophysics Data System (ADS)

Wahid, Zaharah; Izwan Latiff, Ahmad; Ahmad, Kartini

2017-12-01

This paper describes an application of a statistical technique one-way ANOVA in completely randomized experiments with three replicates. This technique was employed to a single factor with four levels and multiple observations at each level. The aim of this study is to investigate the relationship between chemical oxygen demand index and location on-sites. Two different approaches are employed for the analyses; critical value and p-value. It also presents key assumptions of the technique to be satisfied by the data in order to obtain valid results. Pairwise comparisons by Turkey method are also considered and discussed to determine where the significant differences among the means is after the ANOVA has been performed. The results revealed that there are statistically significant relationship exist between the chemical oxygen demand index and the location on-sites.

An Investigation of Dental Luting Cement Solubility as a Function of the Marginal Gap.

DTIC Science & Technology

1988-05-01

way ANOVA for the Phase 1 Diffusion Study revealed that there were statistically significant differences between the test groups. A Duncan’s Multiple...cement. The 25, 50, and 75 micron groups demonstrated no statistically significant differences in the amount of remaining luting cement. ( p< 0.05) A...one-way ANOVA was also performed on Phase 2 Dynamic Study. This test revealed that there were statistically significant differences among the test

Analyzing traffic source impact on returning visitors ratio in information provider website

NASA Astrophysics Data System (ADS)

Prasetio, A.; Sari, P. K.; Sharif, O. O.; Sofyan, E.

2016-04-01

Web site performance, especially returning visitor is an important metric for an information provider web site. Since high returning visitor is a good indication of a web site’s visitor loyalty, it is important to find a way to improve this metric. This research investigated if there is any difference on returning visitor metric among three web traffic sources namely direct, referral and search. Monthly returning visitor and total visitor from each source is retrieved from Google Analytics tools and then calculated to measure returning visitor ratio. The period of data observation is from July 2012 to June 2015 resulting in a total of 108 samples. These data then analysed using One-Way Analysis of Variance (ANOVA) to address our research question. The results showed that different traffic source has significantly different returning visitor ratio especially between referral traffic source and the other two traffic sources. On the other hand, this research did not find any significant difference between returning visitor ratio from direct and search traffic sources. The owner of the web site can focus to multiply referral links from other relevant sites.

Comparative study between different simple methods manipulating ratio spectra for the analysis of alogliptin and metformin co-formulated with highly different concentrations.

PubMed

Zaghary, Wafaa A; Mowaka, Shereen; Hassan, Mostafa A; Ayoub, Bassam M

2017-11-05

Different simple spectrophotometric methods were developed for simultaneous determination of alogliptin and metformin manipulating their ratio spectra with successful application on recently approved combination, Kazano® tablets. Spiking was implemented to detect alogliptin in spite of its low contribution in the pharmaceutical formulation as low quantity in comparison to metformin. Linearity was acceptable over the concentration range of 2.5-25.0μg/mL and 2.5-15.0μg/mL for alogliptin and metformin, respectively using derivative ratio, ratio subtraction coupled with extended ratio subtraction and spectrum subtraction coupled with constant multiplication. The optimized methods were compared using one-way analysis of variance (ANOVA) and proved to be accurate for assay of the investigated drugs in their pharmaceutical dosage form. Copyright © 2017 Elsevier B.V. All rights reserved.

Ex vivo fracture resistance of endodontically treated maxillary central incisors restored with fiber-reinforced composite posts and experimental dentin posts

PubMed Central

Kathuria, Ambica; Kavitha, M; Khetarpal, Suchit

2011-01-01

Aim: To compare the fracture resistance of teeth restored with fiber-reinforced composite (FRC) posts and experimental dentin posts milled from human root dentin. Materials and Methods: Thirty maxillary central incisors were divided into three groups of ten each. Twenty teeth were restored with FRC posts and solid dentin posts and numbered as Groups 2 and 3 respectively while Group 1 acted as the control, without any post. The teeth were loaded at 135° angle to their long axes after core build-up and the failure loads were recorded. Results: One-way Analysis of Variance (ANOVA) and Bonferroni multiple comparisons revealed a significant difference among test groups with the control group showing the highest fracture resistance, followed by the dentin post group and lastly the FRC post group. Conclusions: Teeth restored with dentin posts exhibited better fracture resistance than those restored with FRC posts. PMID:22144812

Academic nursing administrators' workplace satisfaction and intent to stay.

PubMed

Emory, Jan; Lee, Peggy; Miller, Michael T; Kippenbrock, Thomas; Rosen, Chris

In nursing education, the academic administrator is critical given the multitude of challenges associated with program delivery (e.g., shortages of faculty, strict and changing regulations for program accreditation, and the sheer demand for more nurses). Unfortunately, with the focus on recruiting and retaining new novice faculty to teach students, academic nursing administrators have been overlooked in recent studies. As such, this study aims to explore the workplace satisfaction and intent to stay of academic nursing administrators by considering their relation to a variety of demographic and work related variables. A secondary data source was used from the Collaborative on Academic Careers in Higher Education (COACHE). One-way Analysis of Variance (ANOVA) with post hoc Fisher's Least Significant Difference tests and t-tests were used in the analysis. Results indicate that several modifiable work factors positively relate to both job satisfaction and intent to stay. Copyright © 2016 Elsevier Inc. All rights reserved.

A Comparison of Analytical and Data Preprocessing Methods for Spectral Fingerprinting

PubMed Central

LUTHRIA, DEVANAND L.; MUKHOPADHYAY, SUDARSAN; LIN, LONG-ZE; HARNLY, JAMES M.

2013-01-01

Spectral fingerprinting, as a method of discriminating between plant cultivars and growing treatments for a common set of broccoli samples, was compared for six analytical instruments. Spectra were acquired for finely powdered solid samples using Fourier transform infrared (FT-IR) and Fourier transform near-infrared (NIR) spectrometry. Spectra were also acquired for unfractionated aqueous methanol extracts of the powders using molecular absorption in the ultraviolet (UV) and visible (VIS) regions and mass spectrometry with negative (MS−) and positive (MS+) ionization. The spectra were analyzed using nested one-way analysis of variance (ANOVA) and principal component analysis (PCA) to statistically evaluate the quality of discrimination. All six methods showed statistically significant differences between the cultivars and treatments. The significance of the statistical tests was improved by the judicious selection of spectral regions (IR and NIR), masses (MS+ and MS−), and derivatives (IR, NIR, UV, and VIS). PMID:21352644

Morphometric assessment of the red stripe weevils, Rhynchophorus vulneratus (Coleoptera: Curculionidae) from several localities in Malaysia

NASA Astrophysics Data System (ADS)

Sazali, Siti Nurlydia; Hazmi, Izfa Riza; Rahim, Faszly; Abang, Fatimah; Jemain, Abdul Aziz

2018-04-01

The recognition of intraspecific variation could enhance knowledge and understanding on the population divergence that might be resulted from different geographical areas. To study the possible effect derived from different locations, a morphometric study of the red stripe weevils, Rhynchophorus vulneratus from different localities in Malaysia was conducted using field and voucher specimens. A total of twenty-three morphological characters were examined from 108 individuals of R. vulneratus representing population of Kota Samarahan, Mukah and central of Peninsular Malaysia. The data were subjected to univariate one-way single factor analysis of variance (ANOVA) and analysed in factor analysis using SPSS version 22.0 software. Univariate ANOVA showed that all tested variables were significantly different (p<0.05) except for mesocoxal distance (MSD), meanwhile from the factor analysis, the first three factors with eigenvalues greater than 1.0 were successfully extracted, resulting in a high variation of 82.687%. For factor 1, 39.213% of total variation was recorded, factor 2 accounted for 34.096% and factor 3 contributing to 9.377%, respectively. The mixed plotting among the twenty-three morphological characters suggests a strong correlation among the parameters examined and further statistical analysis should be conducted to include environmental factors such as habitat types, food availability and predation effect.

Study of long term structural and functional changes in medically controlled glaucoma

PubMed Central

Pandey, Achyut N; Sujata, S

2014-01-01

AIM Prospectively analyze the long term structural and functional changes in patients of primary open angle glaucoma (POAG) receiving medical therapy (beta blockers and non beta blockers). In this study an attempt has been made to evaluate whether medical reduction of IOP prevents or delays the progression of glaucomatous visual field loss and/or optic nerve damage in patients with open angle glaucoma. METHODS Study conducted over a period of 27 months, at a tertiary eye care hospital including both eyes of 40 patients with POAG. Group 1 (20 patients, 40 eyes) received beta-blockers, and Group 2 (20 patients, 40 eyes) received non-beta-blockers. Each patient underwent intraocular pressure measurement, best corrected visual acuity, slit-lamp, fundus examination, gonioscopy, central corneal thickness, visual field assessment by Humphrey automated perimetry and retinal nerve fibre layer thickness by Stratus optical coherence tomography at baseline and at two subsequent visits. The average time interval between each visit was 10-11 months. The statistical analysis was done using one-way analysis of variance (ANOVA). Post-hoc test, using tukey' method were adopted. Probablity (P) value of 0.05 or less was considered to be statistically significant. RESULTS A total of 80 eyes of 40 patients of POAG were enrolled, 24 males, 16 females, age group 50-80 years. In both beta and non beta blocker group, reduction (improvement) in mean IOP from initial levels to the levels achieved at the 2nd and 3rd visits was statistically significant. One way ANOVA (df=2), fisher f value=11.64, P=0.000, one way ANOVA (df=3), fisher f value=35.61, P=0.000. Both mean deviation (MD) and pattern standard deviation (PSD) in both beta and non beta blockers at different visits were not statistically significant. Retinal nerve fibre layer thickness (RNFL) -only mean inferior retinal nerve fibre layer, the difference between the mean value in beta and non beta blocker groupwere statistically significant. [unpaired t test value (df=78) =2.27, P=0.03]. Side effects with beta blocker were conjunctival hyperemia (10%), burning (5%), and conjunctival hyperemia (5%) in non beta blockers. CONCLUSION Non-beta-blockers are as effective as beta-blockers in bringing about a significant lowering of intraocular pressure to the normal range, and in preventing progressive damage to the visual fields and retinal nerve fibre layer. The absence of systemic side effects and superior IOP lowering efficacy has made non beta-blockers attractive for first line therapy for the treatment of glaucoma worldwide. PMID:24634878

Study of long term structural and functional changes in medically controlled glaucoma.

PubMed

Pandey, Achyut N; Sujata, S

2014-01-01

Prospectively analyze the long term structural and functional changes in patients of primary open angle glaucoma (POAG) receiving medical therapy (beta blockers and non beta blockers). In this study an attempt has been made to evaluate whether medical reduction of IOP prevents or delays the progression of glaucomatous visual field loss and/or optic nerve damage in patients with open angle glaucoma. Study conducted over a period of 27 months, at a tertiary eye care hospital including both eyes of 40 patients with POAG. Group 1 (20 patients, 40 eyes) received beta-blockers, and Group 2 (20 patients, 40 eyes) received non-beta-blockers. Each patient underwent intraocular pressure measurement, best corrected visual acuity, slit-lamp, fundus examination, gonioscopy, central corneal thickness, visual field assessment by Humphrey automated perimetry and retinal nerve fibre layer thickness by Stratus optical coherence tomography at baseline and at two subsequent visits. The average time interval between each visit was 10-11 months. The statistical analysis was done using one-way analysis of variance (ANOVA). Post-hoc test, using tukey' method were adopted. Probablity (P) value of 0.05 or less was considered to be statistically significant. A total of 80 eyes of 40 patients of POAG were enrolled, 24 males, 16 females, age group 50-80 years. In both beta and non beta blocker group, reduction (improvement) in mean IOP from initial levels to the levels achieved at the 2nd and 3rd visits was statistically significant. One way ANOVA (df=2), fisher f value=11.64, P=0.000, one way ANOVA (df=3), fisher f value=35.61, P=0.000. Both mean deviation (MD) and pattern standard deviation (PSD) in both beta and non beta blockers at different visits were not statistically significant. Retinal nerve fibre layer thickness (RNFL) -only mean inferior retinal nerve fibre layer, the difference between the mean value in beta and non beta blocker groupwere statistically significant. [unpaired t test value (df=78) =2.27, P=0.03]. Side effects with beta blocker were conjunctival hyperemia (10%), burning (5%), and conjunctival hyperemia (5%) in non beta blockers. Non-beta-blockers are as effective as beta-blockers in bringing about a significant lowering of intraocular pressure to the normal range, and in preventing progressive damage to the visual fields and retinal nerve fibre layer. The absence of systemic side effects and superior IOP lowering efficacy has made non beta-blockers attractive for first line therapy for the treatment of glaucoma worldwide.

Light transmittance of zirconia as a function of thickness and microhardness of resin cements under different thicknesses of zirconia

PubMed Central

Egilmez, Ferhan; Ergun, Gulfem; Kaya, Bekir M.

2013-01-01

Objective: The objective of this study was to compare microhardness of resin cements under different thicknesses of zirconia and the light transmittance of zirconia as a function of thickness. Study design: A total of 126 disc-shaped specimens (2 mm in height and 5 mm in diameter) were prepared from dual-cured resin cements (RelyX Unicem, Panavia F and Clearfil SA cement). Photoactivation was performed by using quartz tungsten halogen and light emitting diode light curing units under different thicknesses of zirconia. Then the specimens (n=7/per group) were stored in dry conditions in total dark at 37°C for 24 h. The Vicker’s hardness test was performed on the resin cement layer with a microhardness tester. Statistical significance was determined using multifactorial analysis of variance (ANOVA) (alpha=.05). Light transmittance of different thicknesses of zirconia (0.3, 0.5 and 0.8 mm) was measured using a hand-held radiometer (Demetron, Kerr). Data were analyzed using one-way ANOVA test (alpha=.05). Results: ANOVA revealed that resin cement and light curing unit had significant effects on microhardness (p < 0.001). Additionally, greater zirconia thickness resulted in lower transmittance. There was no correlation between the amount of light transmitted and microhardness of dual-cured resin cements (r = 0.073, p = 0.295). Conclusion: Although different zirconia thicknesses might result in insufficient light transmission, dual-cured resin cements under zirconia restorations could have adequate microhardness. Key words:Zirconia, microhardness, light transmittance, resin cement. PMID:23385497

Evaluation of shear bond strength of porcelain bonded to laser welded titanium surface and determination of mode of bond failure.

PubMed

Patil, Narendra P; Dandekar, Minal; Nadiger, Ramesh K; Guttal, Satyabodh S

2010-09-01

The aim of this study was to evaluate the shear bond strength of porcelain to laser welded titanium surface and to determine the mode of bond failure through scanning electron microscopy (SEM) and energy dispersive spectrophotometry (EDS). Forty five cast rectangular titanium specimens with the dimension of 10 mm x 8 mm x 1 mm were tested. Thirty specimens had a perforation of 2 mm diameter in the centre. These were randomly divided into Group A and B. The perforations in the Group B specimens were repaired by laser welding using Cp Grade II titanium wire. The remaining 15 specimens were taken as control group. All the test specimens were layered with low fusing porcelain and tested for shear bond strength. The debonded specimens were subjected to SEM and EDS. Data were analysed with 1-way analysis of variance and Student's t-test for comparison among the different groups. One-way analysis of variance (ANOVA) showed no statistically significant difference in shear bond strength values at a 5% level of confidence. The mean shear bond strength values for control group, Group A and B was 8.4 +/- 0.5 Mpa, 8.1 +/- 0.4 Mpa and 8.3 +/- 0.3 Mpa respectively. SEM/EDS analysis of the specimens showed mixed and cohesive type of bond failure. Within the limitations of the study laser welding did not have any effect on the shear bond strength of porcelain bonded to titanium.

An approach to optimize sample preparation for MALDI imaging MS of FFPE sections using fractional factorial design of experiments.

PubMed

Oetjen, Janina; Lachmund, Delf; Palmer, Andrew; Alexandrov, Theodore; Becker, Michael; Boskamp, Tobias; Maass, Peter

2016-09-01

A standardized workflow for matrix-assisted laser desorption/ionization imaging mass spectrometry (MALDI imaging MS) is a prerequisite for the routine use of this promising technology in clinical applications. We present an approach to develop standard operating procedures for MALDI imaging MS sample preparation of formalin-fixed and paraffin-embedded (FFPE) tissue sections based on a novel quantitative measure of dataset quality. To cover many parts of the complex workflow and simultaneously test several parameters, experiments were planned according to a fractional factorial design of experiments (DoE). The effect of ten different experiment parameters was investigated in two distinct DoE sets, each consisting of eight experiments. FFPE rat brain sections were used as standard material because of low biological variance. The mean peak intensity and a recently proposed spatial complexity measure were calculated for a list of 26 predefined peptides obtained by in silico digestion of five different proteins and served as quality criteria. A five-way analysis of variance (ANOVA) was applied on the final scores to retrieve a ranking of experiment parameters with increasing impact on data variance. Graphical abstract MALDI imaging experiments were planned according to fractional factorial design of experiments for the parameters under study. Selected peptide images were evaluated by the chosen quality metric (structure and intensity for a given peak list), and the calculated values were used as an input for the ANOVA. The parameters with the highest impact on the quality were deduced and SOPs recommended.

Pregabalin reduces acute inflammatory and persistent pain associated with nerve injury and cancer in rat models of orofacial pain.

PubMed

Hummig, Wagner; Kopruszinski, Caroline Machado; Chichorro, Juliana Geremias

2014-01-01

To assess the analgesic effect of pregabalin in orofacial models of acute inflammatory pain and of persistent pain associated with nerve injury and cancer, and so determine its effectiveness in controlling orofacial pains having different underlying mechanisms. Orofacial capsaicin and formalin tests were employed in male Wistar rats to assess the influence of pregabalin (or vehicle) pretreatment in acute pain models, and the results from these experiments were analyzed by one-way analysis of variance (ANOVA) followed by Newman Keuls post-hoc test. Pregabalin (or vehicle) treatment was also tested on the facial heat hyperalgesia that was evaluated in rats receiving injection of the inflammatory irritant carrageenan into the upper lip, as well as after constriction of the infraorbital nerve (a model of trigeminal neuropathic pain), or after inoculation of tumor cells into the facial vibrissal pad; two-way repeated measures ANOVA followed by Newman-Keuls post-hoc test was used to analyze data from these experiments. Facial grooming induced by capsaicin was abolished by pretreatment with pregabalin at 10 and 30 mg/kg. However, pregabalin failed to modify the first phase of the formalin response, but reduced the second phase at both doses (10 and 30 mg/kg). In addition, treatment of rats with pregabalin reduced the heat hyperalgesia induced by carrageenan, as well as by nerve injury and facial cancer. Pregabalin produced a marked antinociceptive effect in rat models of facial inflammatory pain as well as in facial neuropathic and cancer pain models, suggesting that it may represent an important agent for the clinical control of orofacial pain.

Anthelmintic activity of Spigelia anthelmia extract against gastrointestinal nematodes of sheep.

PubMed

Ademola, I O; Fagbemi, B O; Idowu, S O

2007-06-01

In vitro (larval development assay) and in vivo studies were conducted to determine possible direct anthelmintic effect of ethanolic and aqueous extracts of Spigelia anthelmia towards different ovine gastrointestinal nematodes. The effect of extracts on development and survival of infective larvae stage (L(3)) was assessed. Best-fit LC(50) values were computed by global model of non-linear regression curve fitting (95% confidence interval). Therapeutic efficacy of the ethanolic extracts administered orally at a dose rate of 125, 250, and 500 mg/kg, relative to a non-medicated control group of sheep harbouring naturally acquired infection of gastrointestinal nematodes, was evaluated in vivo.The presence of S. anthelmia extracts in the cultures decreased the survival of L(3) larvae. The LC(50) of aqueous extract (0.714 mg/ml) differ significantly from the LC(50) of the ethanolic extract (0.628 mg/ml) against the strongyles (p < 0.05, paired t-test). Faecal egg counts on day 12 after treatment showed that the extract is effective, relative to control (one-way analysis of variance [ANOVA], Dunnett's multiple comparison test) at 500 mg/kg against Strongyloides spp. (p < 0.01), 250 mg/kg against Oesophagostomum spp., Trichuris spp. (p < 0.05), and 125 mg/kg against Haemonchus spp. and Trichostrongylus spp. (p < 0.01). The effect of the doses is significant in all cases, the day after treatment is also extremely significant in most cases, whereas interaction between dose and day after treatment is significant (two-way ANOVA). S. anthelmia extract could, therefore, find application in the control of helminth in livestock, by the ethnoveterinary medicine approach.

Eta- and Partial Eta-Squared in L2 Research: A Cautionary Review and Guide to More Appropriate Usage

ERIC Educational Resources Information Center

Norouzian, Reza; Plonsky, Luke

2018-01-01

Eta-squared (?[superscript 2]) and partial eta-squared (?[subscript p][superscript 2]) are effect sizes that express the amount of variance accounted for by one or more independent variables. These indices are generally used in conjunction with ANOVA, the most commonly used statistical test in second language (L2) research (Plonsky, 2013).…

Analysis of Variance in Statistical Image Processing

NASA Astrophysics Data System (ADS)

Kurz, Ludwik; Hafed Benteftifa, M.

1997-04-01

A key problem in practical image processing is the detection of specific features in a noisy image. Analysis of variance (ANOVA) techniques can be very effective in such situations, and this book gives a detailed account of the use of ANOVA in statistical image processing. The book begins by describing the statistical representation of images in the various ANOVA models. The authors present a number of computationally efficient algorithms and techniques to deal with such problems as line, edge, and object detection, as well as image restoration and enhancement. By describing the basic principles of these techniques, and showing their use in specific situations, the book will facilitate the design of new algorithms for particular applications. It will be of great interest to graduate students and engineers in the field of image processing and pattern recognition.

Analysis of vertical marginal discrepancy in feldspathic porcelain crowns manufactured with different CAD/CAM systems: Closed and open.

PubMed

Kricheldorf, Fabio; Bueno, Cleuber Rodrigo de Souza; Amaral, Wilson da Silva; Junior, Joel Ferreira Santiago; Filho, Hugo Nary

2018-01-01

The objective of this study is to compare the marginal adaptation of feldspathic porcelain crowns using two computer-aided design/computer-aided manufacturing systems, one of them is open and the other is closed. Twenty identical titanium abutments were divided into two groups: open system (OS), where ceramic crowns were created using varied equipment and software, and closed system (CS), where ceramic crowns were created using the CEREC system. Through optical microscopy analysis, we assess the marginal adaptation of the prosthetic interfaces. The data were subjected to the distribution of normality and variance. The t -test was used for the analysis of the comparison factor between the groups, and the one-way ANOVA was used to compare the variance of crown analysis regions within the group. A significance level of 5% was considered for the analyses. There was a significant difference between the systems ( P = 0.007), with the CS group having the higher mean (23.75 μm ± 3.05) of marginal discrepancy when compared to the open group (17.94 μm ± 4.77). Furthermore, there were no differences in marginal discrepancy between the different points between the groups ( P ≥ 0.05). The studied groups presented results within the requirements set out in the literature. However, the OS used presented better results in marginal adaptation.

The impact of emphysema on dosimetric parameters for stereotactic body radiotherapy of the lung

PubMed Central

Ochiai, Satoru; Nomoto, Yoshihito; Yamashita, Yasufumi; Inoue, Tomoki; Murashima, Shuuichi; Hasegawa, Daisuke; Kurita, Yoshie; Watanabe, Yui; Toyomasu, Yutaka; Kawamura, Tomoko; Takada, Akinori; Noriko; Kobayashi, Shigeki; Sakuma, Hajime

2016-01-01

The purpose of this study was to evaluate the impact of emphysematous changes in lung on dosimetric parameters in stereotactic body radiation therapy (SBRT) for lung tumor. A total of 72 treatment plans were reviewed, and dosimetric factors [including homogeneity index (HI) and conformity index (CI)] were evaluated. Emphysematous changes in lung were observed in 43 patients (60%). Patients were divided into three groups according to the severity of emphysema: no emphysema (n = 29), mild emphysema (n = 22) and moderate to severe emphysema groups (n = 21). The HI (P < 0.001) and the CI (P = 0.029) were significantly different in accordance with the severity of emphysema in one-way analysis of variance (ANOVA). The HI value was significantly higher in the moderate to severe emphysema group compared with in the no emphysema (Tukey, P < 0.001) and mild emphysema groups (P = 0.002). The CI value was significantly higher in the moderate to severe emphysema group compared with in the no emphysema group (P = 0.044). In multiple linear regression analysis, the severity of emphysema (P < 0.001) and the mean material density of the lung within the PTV (P < 0.001) were significant factors for HI, and the mean density of the lung within the PTV (P = 0.005) was the only significant factor for CI. The mean density of the lung within the PTV was significantly different in accordance with the severity of emphysema (one-way ANOVA, P = 0.008) and the severity of emphysema (P < 0.001) was one of the significant factors for the density of the lung within the PTV in multiple linear regression analysis. Our results suggest that emphysematous changes in the lung significantly impact on several dosimetric parameters in SBRT, and they should be carefully evaluated before treatment planning. PMID:27380802

A Longitudinal Investigation of Alcohol Use over the Course of the Year Following Medical-Surgical Intensive Care Unit Admission

PubMed Central

Davydow, Dimitry S.; Zatzick, Douglas; Hough, Catherine L.; Katon, Wayne J.

2013-01-01

Background There have been no studies describing post-intensive care unit (ICU) alcohol use among medical-surgical ICU survivors. Objective To examine alcohol use and identify potentially modifiable risk factors, such as in-hospital probable acute stress disorder, for increased alcohol use following medical-surgical ICU admission. Method This longitudinal investigation included 150 medical-surgical ICU survivors. In-hospital interviews obtained baseline characteristics including pre-ICU alcohol use with the Alcohol Use Disorders Identification Test (AUDIT) and in-hospital probable acute stress disorder with the Posttraumatic Stress Disorder Checklist-civilian version. Clinical factors were obtained from medical records. Post-ICU alcohol use was ascertained via telephone interviews at 3 and 12 months post-discharge using the AUDIT. Mixed-model linear regression was used to examine potential risk factors for increased post-ICU alcohol use. Results There was a significant decline in the mean AUDIT score from baseline (3.9, 95%Confidence Interval [95%CI]: 2.9, 5.0) to 3 months post-ICU (1.5, 95%CI: 1.0, 2.1) (P < 0.001 by one-way analysis of variance [ANOVA]), with a significant increase between 3 and 12 months post-ICU (2.7, 95%CI: 1.8, 3.5) (P < 0.001 by one-way ANOVA). After adjusting for patient and clinical factors, in-hospital probable acute stress disorder (beta: 3.0, 95%CI: 0.9, 5.0) and pre-ICU unhealthy alcohol use (beta: 5.4, 95%CI: 3.4, 7.4) were independently associated with increased post-ICU alcohol use. Conclusions Alcohol use decreases in the early aftermath of medical-surgical ICU admission and then increases significantly by one year post-ICU. Interventions for unhealthy alcohol use among medical-surgical ICU survivors that take into account comorbid psychiatric symptoms are needed. PMID:23414847

Effects of Stress and Social Enrichment on Alcohol Intake, Biological and Psychological Stress Responses in Rats

DTIC Science & Technology

2010-06-28

Variance (ANOVA) Table for Serum Corticosterone Table 15 – Repeated-Measures ANOVA Table for Body Weight, Within-Subject Effects Table 16...Serum Ethanol Concentration Table 21 – Repeated-Measures ANOVA Table for Rotarod Performance, Within- Subject Effects Table 22 – Repeated...and that this social environment seems to attenuate the effects of predator and unpredictable stressors on serum corticosterone . In summary, stressed

Associations of age, aerobic fitness, and body mass index with injury in an operational Army brigade.

PubMed

Rappole, Catherine; Grier, Tyson; Anderson, Morgan K; Hauschild, Veronique; Jones, Bruce H

2017-11-01

To investigate the effects of age, aerobic fitness, and body mass index (BMI) on injury risk in operational Army soldiers. Retrospective cohort study. Male soldiers from an operational Army brigade were administered electronic surveys regarding personal characteristics, physical fitness, and injuries occurring over the last 12 months. Injury risks were stratified by age, 2-mile run time, and BMI. Analyses included descriptive incidence, a Mantel-Haenszel χ 2 test to determine trends, a multivariable logistic regression to determine factors associated with injury, and a one-way analysis of variance (ANOVA). Forty-seventy percent of 1099 respondents reported at least one injury. A linear trend showed that as age, 2-mile run time, and BMI increased, so did injury risk (p<0.01). When controlling for BMI, the most significant independent injury risk factors were older age (odd ratio (OR) 30years-35years/≤24years=1.25, 95%CI: 1.08-2.32), (OR≥36years/≤24years=2.05, 95%CI: 1.36-3.10), and slow run times (OR≥15.9min/≤13.9min=1.91, 95%CI: 1.28-2.85). An ANOVA showed that both run times and BMI increased with age. The stratified analysis and the multivariable logistic regression suggested that older age and poor aerobic fitness are stronger predictors of injury than BMI. Copyright © 2017 Sports Medicine Australia. All rights reserved.

Evaluation of surface roughness of orthodontic wires by means of atomic force microscopy.

PubMed

D'Antò, Vincenzo; Rongo, Roberto; Ametrano, Gianluca; Spagnuolo, Gianrico; Manzo, Paolo; Martina, Roberto; Paduano, Sergio; Valletta, Rosa

2012-09-01

To compare the surface roughness of different orthodontic archwires. Four nickel-titanium wires (Sentalloy(®), Sentalloy(®) High Aesthetic, Titanium Memory ThermaTi Lite(®), and Titanium Memory Esthetic(®)), three β-titanium wires (TMA(®), Colored TMA(®), and Beta Titanium(®)), and one stainless-steel wire (Stainless Steel(®)) were considered for this study. Three samples for each wire were analyzed by atomic force microscopy (AFM). Three-dimensional images were processed using Gwiddion software, and the roughness average (Ra), the root mean square (Rms), and the maximum height (Mh) values of the scanned surface profile were recorded. Statistical analysis was performed by one-way analysis of variance (ANOVA) followed by Tukey's post hoc test (P < .05). The Ra, Rms, and Mh values were expressed as the mean ± standard deviation. Among as-received archwires, the Stainless Steel (Ra  =  36.6 ± 5.8; Rms  =  48 ± 7.7; Mh  =  328.1 ± 64) archwire was less rough than the others (ANOVA, P < .05). The Sentalloy High Aesthetic was the roughest (Ra  =  133.5 ± 10.8; Rms  =  165.8 ± 9.8; Mh  =  949.6 ± 192.1) of the archwires. The surface quality of the wires investigated differed significantly. Ion implantation effectively reduced the roughness of TMA. Moreover, Teflon(®)-coated Titanium Memory Esthetic was less rough than was ion-implanted Sentalloy High Aesthetic.

Smoothing Spline ANOVA Decomposition of Arbitrary Splines: An Application to Eye Movements in Reading

PubMed Central

Matuschek, Hannes; Kliegl, Reinhold; Holschneider, Matthias

2015-01-01

The Smoothing Spline ANOVA (SS-ANOVA) requires a specialized construction of basis and penalty terms in order to incorporate prior knowledge about the data to be fitted. Typically, one resorts to the most general approach using tensor product splines. This implies severe constraints on the correlation structure, i.e. the assumption of isotropy of smoothness can not be incorporated in general. This may increase the variance of the spline fit, especially if only a relatively small set of observations are given. In this article, we propose an alternative method that allows to incorporate prior knowledge without the need to construct specialized bases and penalties, allowing the researcher to choose the spline basis and penalty according to the prior knowledge of the observations rather than choosing them according to the analysis to be done. The two approaches are compared with an artificial example and with analyses of fixation durations during reading. PMID:25816246

Effect of an adhesive resin luting agent on the dowel-head retention of three different core materials.

PubMed

Aksoy, Gokhan; Cotert, H Serdar; Korkut, Levent

2005-05-01

A dowel-and-core restoration may fail due to failure at either the dowel-tooth or dowel head-core material interface. Long-term clinical success of a dowel-and-core restoration depends on retention of both the dowel to the tooth and the dowel head to the core material. Thus, strengthening of the dowel head-core interface is important. This study evaluated the retention between a prefabricated dowel and 3 different core materials with or without a dual-polymerized adhesive resin luting agent. Sixty prefabricated dowels (Gold Plated Anchorage Post) were divided into 3 groups (n=20) consisting of 1 of 3 core materials, amalgam (Standalloy F), light-polymerized resin composite (Clearfil Ray), or glass ionomer (Chelon-Silver). Each core group was divided into 2 subgroups (n=10), and a dual-polymerized adhesive resin luting agent (Panavia F) was applied to the dowel heads of 1 of these subgroups before application of the core material. The manufacturing procedure was standardized by using a plastic index (4.5-mm internal diameter and 5-mm height) and a custom-made dowel holder, which held the dowel head. Prepared specimens were stored in water at room temperature for 3 months and then loaded to fracture in a universal testing machine with a crosshead speed of 0.05 mm/min until failure. Bond strengths were recorded (MPa). Data were analyzed with 2-way analysis of variance (ANOVA) in a 2 x 3 factorial randomized design (alpha=.05). Afterward, core material differences were computed with 1-way ANOVA for both of the bonded and nonbonded groups. Post hoc multiple comparisons were made with the Dunnett C multiple range test. Dowel-head retention values (MPa) of the tested core materials (mean +/- SD) from the highest to the lowest were as follows: bonded amalgam core, 296.1 +/- 108; bonded composite core, 284.3 +/- 38.3; nonbonded composite core, 177.0 +/- 53.7; nonbonded amalgam core, 128.5 +/- 35.0; bonded glass-ionomer core (GIC), 128.0 +/- 24.5; nonbonded GIC, 61.8 +/- 13.3. Two-way ANOVA revealed significant differences between the core material groups and between the bonded and nonbonded groups (P <.001). The interaction between the core material and bond variables was also significant (P =.018). One-way ANOVA revealed statistically significant differences between the bonded (P <.001) and also between the nonbonded core material groups (P <.001). Post hoc multiple comparisons showed that the dowel-head retention of the GIC was significantly weaker than the post-head retention for amalgam and resin composite, whether bonded or not. Within the limitations of this study, the adhesive resin luting agent tested appeared to have a significant strengthening effect on the dowel-head retention of the core materials.

Local and systemic effect of transfection-reagent formulated DNA vectors on equine melanoma.

PubMed

Mählmann, Kathrin; Feige, Karsten; Juhls, Christiane; Endmann, Anne; Schuberth, Hans-Joachim; Oswald, Detlef; Hellige, Mareu; Doherr, Marcus; Cavalleri, Jessika-M V

2015-05-14

Equine melanoma has a high incidence in grey horses. Xenogenic DNA vaccination may represent a promising therapeutic approach against equine melanoma as it successfully induced an immunological response in other species suffering from melanoma and in healthy horses. In a clinical study, twenty-seven, grey, melanoma-bearing, horses were assigned to three groups (n = 9) and vaccinated on days 1, 22, and 78 with DNA vectors encoding for equine (eq) IL-12 and IL-18 alone or in combination with either human glycoprotein (hgp) 100 or human tyrosinase (htyr). Horses were vaccinated intramuscularly, and one selected melanoma was locally treated by intradermal peritumoral injection. Prior to each injection and on day 120, the sizes of up to nine melanoma lesions per horse were measured by caliper and ultrasound. Specific serum antibodies against hgp100 and htyr were measured using cell based flow-cytometric assays. An Analysis of Variance (ANOVA) for repeated measurements was performed to identify statistically significant influences on the relative tumor volume. For post-hoc testing a Tukey-Kramer Multiple-Comparison Test was performed to compare the relative volumes on the different examination days. An ANOVA for repeated measurements was performed to analyse changes in body temperature over time. A one-way ANOVA was used to evaluate differences in body temperature between the groups. A p-value < 0.05 was considered significant for all statistical tests applied. In all groups, the relative tumor volume decreased significantly to 79.1 ± 26.91% by day 120 (p < 0.0001, Tukey-Kramer Multiple-Comparison Test). Affiliation to treatment group, local treatment and examination modality had no significant influence on the results (ANOVA for repeated measurements). Neither a cellular nor a humoral immune response directed against htyr or hgp100 was detected. Horses had an increased body temperature on the day after vaccination. This is the first clinical report on a systemic effect against equine melanoma following treatment with DNA vectors encoding eqIL12 and eqIL18 and formulated with a transfection reagent. Addition of DNA vectors encoding hgp100 respectively htyr did not potentiate this effect.

Local and systemic effect of transfection-reagent formulated DNA vectors on equine melanoma.

PubMed

Mählmann, Kathrin; Feige, Karsten; Juhls, Christiane; Endmann, Anne; Schuberth, Hans-Joachim; Oswald, Detlef; Hellige, Maren; Doherr, Marcus; Cavalleri, Jessika-M V

2015-06-11

Equine melanoma has a high incidence in grey horses. Xenogenic DNA vaccination may represent a promising therapeutic approach against equine melanoma as it successfully induced an immunological response in other species suffering from melanoma and in healthy horses. In a clinical study, twenty-seven, grey, melanoma-bearing, horses were assigned to three groups (n = 9) and vaccinated on days 1, 22, and 78 with DNA vectors encoding for equine (eq) IL-12 and IL-18 alone or in combination with either human glycoprotein (hgp) 100 or human tyrosinase (htyr). Horses were vaccinated intramuscularly, and one selected melanoma was locally treated by intradermal peritumoral injection. Prior to each injection and on day 120, the sizes of up to nine melanoma lesions per horse were measured by caliper and ultrasound. Specific serum antibodies against hgp100 and htyr were measured using cell based flow-cytometric assays. An Analysis of Variance (ANOVA) for repeated measurements was performed to identify statistically significant influences on the relative tumor volume. For post-hoc testing a Tukey-Kramer Multiple-Comparison Test was performed to compare the relative volumes on the different examination days. An ANOVA for repeated measurements was performed to analyse changes in body temperature over time. A one-way ANOVA was used to evaluate differences in body temperature between the groups. A p-value < 0.05 was considered significant for all statistical tests applied. In all groups, the relative tumor volume decreased significantly to 79.1 ± 26.91% by day 120 (p < 0.0001, Tukey-Kramer Multiple-Comparison Test). Affiliation to treatment group, local treatment and examination modality had no significant influence on the results (ANOVA for repeated measurements). Neither a cellular nor a humoral immune response directed against htyr or hgp100 was detected. Horses had an increased body temperature on the day after vaccination. This is the first clinical report on a systemic effect against equine melanoma following treatment with DNA vectors encoding eqIL12 and eqIL18 and formulated with a transfection reagent. Addition of DNA vectors encoding hgp100 respectively htyr did not potentiate this effect.

Whole-animal metabolic rate is a repeatable trait: a meta-analysis.

PubMed

Nespolo, Roberto F; Franco, Marcela

2007-06-01

Repeatability studies are gaining considerable interest among physiological ecologists, particularly in traits affected by high environmental/residual variance, such as whole-animal metabolic rate (MR). The original definition of repeatability, known as the intraclass correlation coefficient, is computed from the components of variance obtained in a one-way ANOVA on several individuals from which two or more measurements are performed. An alternative estimation of repeatability, popular among physiological ecologists, is the Pearson product-moment correlation between two consecutive measurements. However, despite the more than 30 studies reporting repeatability of MR, so far there is not a definite synthesis indicating: (1) whether repeatability changes in different types of animals; (2) whether some kinds of metabolism are more repeatable than others; and most important, (3) whether metabolic rate is significantly repeatable. We performed a meta-analysis to address these questions, as well as to explore the historical trend in repeatability studies. Our results show that metabolic rate is significantly repeatable and its effect size is not statistically affected by any of the mentioned factors (i.e. repeatability of MR does not change in different species, type of metabolism, time between measurements, and number of individuals). The cumulative meta-analysis revealed that repeatability studies in MR have already reached an asymptotical effect size with no further change either in its magnitude and/or variance (i.e. additional studies will not contribute significantly to the estimator). There was no evidence of strong publication bias.

Comparing Bayesian estimates of genetic differentiation of molecular markers and quantitative traits: an application to Pinus sylvestris.

PubMed

Waldmann, P; García-Gil, M R; Sillanpää, M J

2005-06-01

Comparison of the level of differentiation at neutral molecular markers (estimated as F(ST) or G(ST)) with the level of differentiation at quantitative traits (estimated as Q(ST)) has become a standard tool for inferring that there is differential selection between populations. We estimated Q(ST) of timing of bud set from a latitudinal cline of Pinus sylvestris with a Bayesian hierarchical variance component method utilizing the information on the pre-estimated population structure from neutral molecular markers. Unfortunately, the between-family variances differed substantially between populations that resulted in a bimodal posterior of Q(ST) that could not be compared in any sensible way with the unimodal posterior of the microsatellite F(ST). In order to avoid publishing studies with flawed Q(ST) estimates, we recommend that future studies should present heritability estimates for each trait and population. Moreover, to detect variance heterogeneity in frequentist methods (ANOVA and REML), it is of essential importance to check also that the residuals are normally distributed and do not follow any systematically deviating trends.

Radiation shielding quality assurance

NASA Astrophysics Data System (ADS)

Um, Dallsun

For the radiation shielding quality assurance, the validity and reliability of the neutron transport code MCNP, which is now one of the most widely used radiation shielding analysis codes, were checked with lot of benchmark experiments. And also as a practical example, follows were performed in this thesis. One integral neutron transport experiment to measure the effect of neutron streaming in iron and void was performed with Dog-Legged Void Assembly in Knolls Atomic Power Laboratory in 1991. Neutron flux was measured six different places with the methane detectors and a BF-3 detector. The main purpose of the measurements was to provide benchmark against which various neutron transport calculation tools could be compared. Those data were used in verification of Monte Carlo Neutron & Photon Transport Code, MCNP, with the modeling for that. Experimental results and calculation results were compared in both ways, as the total integrated value of neutron fluxes along neutron energy range from 10 KeV to 2 MeV and as the neutron spectrum along with neutron energy range. Both results are well matched with the statistical error +/-20%. MCNP results were also compared with those of TORT, a three dimensional discrete ordinates code which was developed by Oak Ridge National Laboratory. MCNP results are superior to the TORT results at all detector places except one. This means that MCNP is proved as a very powerful tool for the analysis of neutron transport through iron & air and further it could be used as a powerful tool for the radiation shielding analysis. For one application of the analysis of variance (ANOVA) to neutron and gamma transport problems, uncertainties for the calculated values of critical K were evaluated as in the ANOVA on statistical data.

Who wants to go to occupational therapy school? Characteristics of Norwegian occupational therapy students.

PubMed

Bonsaksen, Tore; Kvarsnes, Hildegunn; Dahl, Mona

2016-07-01

Research on occupational therapy students has often been concerned with quite narrow topics. However, the basic characteristics of this group are yet to be examined in more depth. This study aimed to explore the sociodemographic, education-related, and work-related characteristics of occupational therapy students. A sample of 160 occupational therapy students in Norway participated. Differences between cohorts of students were examined with one-way analyses of variance (ANOVA) for continuous variables and with chi-square tests for categorical variables. The sample had a mean age of 24 years and was predominantly female (79%). More than one -third of the students had one or both parents in an occupation requiring health education, whereas two-thirds of the students had one or both parents in an occupation requiring higher education. At entry, 57% of the participants had occupational therapy as their preferred choice of education and 43% had previous higher education experience. The few significant differences between the study cohorts were negligible. In the education programmes, specific attention may be considered for students with characteristics associated with increased risk of poorer study performance or other problems. This may concern male students and students with no previous higher education experience.

Multivariate analysis of variance of designed chromatographic data. A case study involving fermentation of rooibos tea.

PubMed

Marini, Federico; de Beer, Dalene; Walters, Nico A; de Villiers, André; Joubert, Elizabeth; Walczak, Beata

2017-03-17

An ultimate goal of investigations of rooibos plant material subjected to different stages of fermentation is to identify the chemical changes taking place in the phenolic composition, using an untargeted approach and chromatographic fingerprints. Realization of this goal requires, among others, identification of the main components of the plant material involved in chemical reactions during the fermentation process. Quantitative chromatographic data for the compounds for extracts of green, semi-fermented and fermented rooibos form the basis of preliminary study following a targeted approach. The aim is to estimate whether treatment has a significant effect based on all quantified compounds and to identify the compounds, which contribute significantly to it. Analysis of variance is performed using modern multivariate methods such as ANOVA-Simultaneous Component Analysis, ANOVA - Target Projection and regularized MANOVA. This study is the first one in which all three approaches are compared and evaluated. For the data studied, all tree methods reveal the same significance of the fermentation effect on the extract compositions, but they lead to its different interpretation. Copyright © 2017 Elsevier B.V. All rights reserved.

Comparative study between EDXRF and ASTM E572 methods using two-way ANOVA

NASA Astrophysics Data System (ADS)

Krummenauer, A.; Veit, H. M.; Zoppas-Ferreira, J.

2018-03-01

Comparison with reference method is one of the necessary requirements for the validation of non-standard methods. This comparison was made using the experiment planning technique with two-way ANOVA. In ANOVA, the results obtained using the EDXRF method, to be validated, were compared with the results obtained using the ASTM E572-13 standard test method. Fisher's tests (F-test) were used to comparative study between of the elements: molybdenum, niobium, copper, nickel, manganese, chromium and vanadium. All F-tests of the elements indicate that the null hypothesis (Ho) has not been rejected. As a result, there is no significant difference between the methods compared. Therefore, according to this study, it is concluded that the EDXRF method was approved in this method comparison requirement.

Micro-shear bond strength of resin cement to dentin after application of desensitizing toothpastes.

PubMed

Bavbek, Andac Barkin; Goktas, Baris; Cekic-Nagas, Isil; Egilmez, Ferhan; Ergun, Gulfem; Eskitascioglu, Gurcan

2013-01-01

The aim of the study was to evaluate the effect of three desensitizing toothpastes on bonding of resin cements to dentin. The occlusal surfaces of 72 maxillary third molars were ground to obtain flat dentin surfaces and then divided into three groups according to three desensitizing toothpastes used: Sensodyne Rapid Relief (GlaxoSmithKline, SmithKline Beecham Ltd., Slough, UK), Signal Sensitive Expert (Unilever Sanayi ve Ticaret Türk A.Ş., Ümraniye, İstanbul, Turkey) and Colgate Sensitive Pro-Relief (Colgate Palmolive, New York, NY). Following bonding of the resin cement (Clearfil™ SA Cement, Kuraray Co, Osaka, Japan) to dentin, the specimens were light cured for 40 s with a LED (Elipar S10, 3M Espe, St. Paul, MN). The strength measurements were accomplished with a micro-shear testing machine (Bisco, Schaumburg, IL) at a cross-head speed of 0.5 mm/min until the failure occurs. Failure modes were examined using a stereomicroscope and scanning electron microscope. The data were analyzed with one-way analysis of variance (ANOVA) and Tukey HSD test (α = 0.05). ANOVA revealed that the application of desensitizing toothpastes had significant effects on bond strength of the resin cement tested to dentin (p < 0.05). Mixed failures were observed in all of the groups. The use of a desensitizing toothpaste before cementation might alter the bond strength of adhesively luted restorations.

In vitro wear of various orthotic device materials.

PubMed

Casey, Jeffery; Dunn, William J; Wright, Edward

2003-11-01

Orthotic devices are advocated to decrease occlusal attrition caused by bruxism but tend to wear with time. This study investigated the wear rate of various materials used to fabricate orthotic devices. Five experimental groups (n=8) were studied: Splint Biocryl autopolymerized (SBA), Splint Biocryl autopolymerized plus additional heat and pressure (SBHP), Forestacryl autopolymerized (FA), Forestacryl autopolymerized plus additional heat and pressure (FHP), and Quick Splint 15-minute (QS), light-polymerized composite. Specimens were mounted to the base of a universal testing machine. A wear device using steatite balls and a load of 9.1 kg was positioned against the specimens, submerged in a 37 degrees C water bath and subjected to 2500 reciprocal cycles. Wear, in micrometers, was calculated as the maximum peak to valley measurement (Ry) using profilometry. Data were subjected to analysis of variance (ANOVA) and Tukey's HSD (alpha=.05). Mean acrylic wear in micrometers was as follows: FA 6.8 +/-3.0; FHP 7.1 +/- 1.8; SBA 20.4 +/- 5.6; SBHP 23.7 +/- 7.8; and QS 23.8 +/- 6.9. One-way ANOVA detected significant differences between groups (P<.001); the Tukey honestly significant difference test determined that FA and FHP specimens were significantly more resistant to wear than all other specimens (P=.007). Differences in in vitro wear resistance among various orthotic device materials exist. The in vitro wear resistance among other autopolymerizing materials appears to be related to proprietary differences.

Heteroscedastic Tests Statistics for One-Way Analysis of Variance: The Trimmed Means and Hall's Transformation Conjunction

ERIC Educational Resources Information Center

Luh, Wei-Ming; Guo, Jiin-Huarng

2005-01-01

To deal with nonnormal and heterogeneous data for the one-way fixed effect analysis of variance model, the authors adopted a trimmed means method in conjunction with Hall's invertible transformation into a heteroscedastic test statistic (Alexander-Govern test or Welch test). The results of simulation experiments showed that the proposed technique…

Optimisation of warpage on plastic injection moulding part using response surface methodology (RSM)

NASA Astrophysics Data System (ADS)

Miza, A. T. N. A.; Shayfull, Z.; Nasir, S. M.; Fathullah, M.; Rashidi, M. M.

2017-09-01

The warpage is often encountered which occur during injection moulding process of thin shell part depending the process condition. The statistical design of experiment method which are Integrating Finite Element (FE) Analysis, moldflow analysis and response surface methodology (RSM) are the stage of few ways in minimize the warpage values of x,y and z on thin shell plastic parts that were investigated. A battery cover of a remote controller is one of the thin shell plastic part that produced by using injection moulding process. The optimum process condition parameter were determined as to achieve the minimum warpage from being occur. Packing pressure, Cooling time, Melt temperature and Mould temperature are 4 parameters that considered in this study. A two full factorial experimental design was conducted in Design Expert of RSM analysis as to combine all these parameters study. FE analysis result gain from analysis of variance (ANOVA) method was the one of the important process parameters influenced warpage. By using RSM, a predictive response surface model for warpage data will be shown.

The application of artificial neural networks and support vector regression for simultaneous spectrophotometric determination of commercial eye drop contents

NASA Astrophysics Data System (ADS)

Valizadeh, Maryam; Sohrabi, Mahmoud Reza

2018-03-01

In the present study, artificial neural networks (ANNs) and support vector regression (SVR) as intelligent methods coupled with UV spectroscopy for simultaneous quantitative determination of Dorzolamide (DOR) and Timolol (TIM) in eye drop. Several synthetic mixtures were analyzed for validating the proposed methods. At first, neural network time series, which one type of network from the artificial neural network was employed and its efficiency was evaluated. Afterwards, the radial basis network was applied as another neural network. Results showed that the performance of this method is suitable for predicting. Finally, support vector regression was proposed to construct the Zilomole prediction model. Also, root mean square error (RMSE) and mean recovery (%) were calculated for SVR method. Moreover, the proposed methods were compared to the high-performance liquid chromatography (HPLC) as a reference method. One way analysis of variance (ANOVA) test at the 95% confidence level applied to the comparison results of suggested and reference methods that there were no significant differences between them. Also, the effect of interferences was investigated in spike solutions.

Nutritional status, fertility and factors associated with anaemia: a cross sectional study among a rural population of Muslim women in Assam, India.

PubMed

Haloi, Anjali; Limbu, Dhruba Kumar

2013-01-01

In the present study an attempt has been made to report on the nutritional status of the Assamese Muslim women of Dadara and Agyathuri villages of the Kamrup district in Assam, India on their basis of body mass index (BMI) and haemoglobin (hb) content. Cross sectional data on 1034 women belonging to the age group of 19 years and above were collected following internationally accepted standards. The fertility of mothers by BMI range was found to be highest (6.50 (mean) +/- 0.14 (SE) and range being 1-11) amongst underweight mothers. The one-way analysis of variance (ANOVA) test of BMI and fertility shows significant relation between different BMI groups withp < 0.01. Highest haemoglobin levels were recorded in the age group of < or = 23 years with a mean of 11.61 +/- 0.06 g/dl, the range being 9.8-13.9 g/dl. Whereas lowest levels of haemoglobin were found in the age groups of 44+ years having a mean value of 10.26 +/- 0.04 g/dl and a range of 9.2-11.8 g/dl. The ANOVA analysis for haemoglobin content and corresponding fertility rates show significant difference between different hemoglobin levels with their live births at p < 0.01. The summary of ANOVA analysis for haemoglobin and BMI range shows the significant difference between groups i.e., normal, overweight and underweight. The t-value and F-ratio is 118.61 and 14068.42, respectively, which is significant at 1% probability. The authors conclude a general trend in the study population of women with high fertility having poor nutritional status. These findings might be important in formulating responsive health policies in an underdeveloped region.

Coding and Commonality Analysis: Non-ANOVA Methods for Analyzing Data from Experiments.

ERIC Educational Resources Information Center

Thompson, Bruce

The advantages and disadvantages of three analytic methods used to analyze experimental data in educational research are discussed. The same hypothetical data set is used with all methods for a direct comparison. The Analysis of Variance (ANOVA) method and its several analogs are collectively labeled OVA methods and are evaluated. Regression…

Cautionary Note on Reporting Eta-Squared Values from Multifactor ANOVA Designs

ERIC Educational Resources Information Center

Pierce, Charles A.; Block, Richard A.; Aguinis, Herman

2004-01-01

The authors provide a cautionary note on reporting accurate eta-squared values from multifactor analysis of variance (ANOVA) designs. They reinforce the distinction between classical and partial eta-squared as measures of strength of association. They provide examples from articles published in premier psychology journals in which the authors…

Should a First Course in ANOVA Be Taught Through MLR?

ERIC Educational Resources Information Center

Williams, John D.

Before implementing a course in the analysis of variance (ANOVA) taught through multiple linear regression, several concerns must be addressed. Adequate computer facilities that are available to students on a low-cost or cost-free basis are necessary; also students must be able to meaningfully communicate with their major advisor regarding their…

Planned Comparisons as Better Alternatives to ANOVA Omnibus Tests.

ERIC Educational Resources Information Center

Benton, Roberta L.

Analyses of data are presented to illustrate the advantages of using a priori or planned comparisons rather than omnibus analysis of variance (ANOVA) tests followed by post hoc or posteriori testing. The two types of planned comparisons considered are planned orthogonal non-trend coding contrasts and orthogonal polynomial or trend contrast coding.…

Use of "t"-Test and ANOVA in Career-Technical Education Research

ERIC Educational Resources Information Center

Rojewski, Jay W.; Lee, In Heok; Gemici, Sinan

2012-01-01

Use of t-tests and analysis of variance (ANOVA) procedures in published research from three scholarly journals in career and technical education (CTE) during a recent 5-year period was examined. Information on post hoc analyses, reporting of effect size, alpha adjustments to account for multiple tests, power, and examination of assumptions…

The Statistical Power of Planned Comparisons.

ERIC Educational Resources Information Center

Benton, Roberta L.

Basic principles underlying statistical power are examined; and issues pertaining to effect size, sample size, error variance, and significance level are highlighted via the use of specific hypothetical examples. Analysis of variance (ANOVA) and related methods remain popular, although other procedures sometimes have more statistical power against…

Overcoming misconceptions of graph interpretation of kinematics motion using calculator based rangers

NASA Astrophysics Data System (ADS)

Olson, John R.

This is a quasi-experimental study of 261 first year high school students that analyzes gains made through the use of calculator based rangers attached to calculators. The study has qualitative components but is based on quantitative tests. Biechner's TUG-K test was used for the pretest, posttest, and post-posttest. The population was divided into one group that predicted the results before using the CBRs and another that did not predict first but completed the same activities. The data for the groups was further disaggregated into learning style groups (based on Kolb's Learning Styles Inventory), type of class (advanced vs. general physics), and gender. Four instructors used the labs developed by the author for this study and created significant differences between the groups by instructor based on interviews, participant observation and one way ANOVA. No significant differences were found between learning styles based on MANOVA. No significant differences were found between predict and nonpredict groups for the one way ANOVAs or MANOVA, however, some differences do exist as measured by a survey and participant observation. Significant differences do exist between gender and type of class (advanced/general) based on one way ANOVA and MANOVA. The males outscored the females on all tests and the advanced physics scored higher than the general physics on all tests. The advanced physics scoring higher was expected but the difference between genders was not.

Effect of at-home bleaching with different thickeners and aging on physical properties of a nanocomposite.

PubMed

Gouveia, Thayla Hellen Nunes; Públio, Juliana do Carmo; Ambrosano, Glaucia Maria Bovi; Paulillo, Luís Alexandre Maffei Sartini; Aguiar, Flávio Henrique Baggio; Lima, Débora Alves Nunes Leite

2016-01-01

To evaluate the influence of 16% carbamide peroxide (CP) containing different thickeners on the physical characteristics of a nanocomposite resin submitted or not to accelerated artificial aging (AAA). One hundred samples were randomly distributed into two groups (n = 50) according to AAA. Each group was divided into 5 subgroups (n = 10) depending on the bleaching/thickener treatment: CP + carbopol, CP + natrosol, carbopol, natrosol, and no treatment (control). The physical properties tested were color (ΔE), gloss (GU), mean roughness (Ra), and Knoop microhardness (KHN). The resin surface was performed with atomic force microscopy (AFM). The color (variable Δ E) was assessed with two-way analysis of variance (ANOVA) and additionally with Tukey's and Dunnett's tests, the roughness values were submitted to Kruskal-Wallis, Dunn's, and Mann-Whitney's tests. Data on gloss and KHN were submitted to two-way ANOVA and Tukey's test (α = 0.05). Among the physical properties evaluated, CP + carbopol promoted a reduction in composite microhardness only, thus differing statistically from the controls. As for CP + natrosol, such a change was not observed. The aging process reduced all the physical properties, thus differing statistically from the nonaging group. CP + carbopol increased the roughness and decreased the gloss of aged resins, whereas natrosol reduced gloss only, which differed statistically from the controls. AFM showed evidence of the loss of organic matrix and exposure to load particles in the aged samples. Therefore, the replacement of carbopol with natrosol provided maintenance of the composite microhardness following bleaching. The aging process reduced the physical properties evaluated, and some changes were enhanced by the application of bleaching.

The in vitro wear behavior of experimental resin-based composites derived from a commercial formulation.

PubMed

Finlay, Nessa; Hahnel, Sebastian; Dowling, Adam H; Fleming, Garry J P

2013-04-01

To investigate the short- and long-term in vitro wear resistance of experimental resin-based composites (RBCs) derived from a commercial formulation. Six experimental RBCs were manufactured by manipulating the monomeric resin composition and the filler characteristics of Grandio (Voco GmbH, Cuxhaven, Germany). The Oregon Health Sciences University (OHSU) oral wear simulator was used in the presence of a food-like slurry to simulate three-body abrasion and attrition wear for 50,000, 150,000 and 300,000 cycles. A three-dimensional image of each wear facet was created and the total volumetric wear (mm(3)) and maximum wear depth (μm) were quantified for the RBC and antagonist. Statistical analyses of the total volumetric wear and maximum wear depth data (two- and one-way analyses of variance (ANOVA), with Tukey's post hoc tests where required) and regression analyses, were conducted at p=0.05. Two-way ANOVAs identified a significant effect of RBC material×wear cycles, RBC material and wear cycles (all p<0.0001). Regression analyses showed significant increases in the total volumetric wear (p≤0.001) and maximum wear depth data (p≤0.004) for all RBCs with increasing wear cycles. Differences between all RBC materials were evident after ≥150,000 wear cycles and antagonist wear provided valuable information to support the experimental findings. Wear simulating machines can provide an indication of the clinical performance but clinical performance is multi-factorial and wear is only a single facet. Employing experimental RBCs provided by a dental manufacturer rather than using self-manufactured RBCs or dental products provides increased experimental control by limiting the variables involved. Copyright © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Can a clinical placement influence stigma? An analysis of measures of social distance.

PubMed

Moxham, Lorna; Taylor, Ellie; Patterson, Christopher; Perlman, Dana; Brighton, Renee; Sumskis, Susan; Keough, Emily; Heffernan, Tim

2016-09-01

The way people who experience mental illness are perceived by health care professionals, which often includes stigmatising attitudes, can have a significant impact on treatment outcomes and on their quality of life. To determine whether stigma towards people with mental illness varied for undergraduate nursing students who attended a non-traditional clinical placement called Recovery Camp compared to students who attended a 'typical' mental health clinical placement. Quasi-experimental. Seventy-nine third-year nursing students were surveyed; n=40 attended Recovery Camp (intervention), n=39 (comparison group) attended a 'typical' mental health clinical placement. All students completed the Social Distance Scale (SDS) pre- and post-placement and at three-month follow-up. Data analysis consisted of a one-way repeated measures analysis of variance (ANOVA) exploring parameter estimates between group scores across three time points. Two secondary repeated measures ANOVAs were performed to demonstrate the differences in SDS scores for each group across time. Pairwise comparisons demonstrated the differences between time intervals. A statistically significant difference in ratings of stigma between the intervention group and the comparison group existed. Parameter estimates revealed that stigma ratings for the intervention group were significantly reduced post-placement and remained consistently low at three-month follow-up. There was no significant difference in ratings of stigma for the comparison group over time. Students who attended Recovery Camp reported significant decreases in stigma towards people with a mental illness over time, compared to the typical placement group. Findings suggest that a therapeutic recreation based clinical placement was more successful in reducing stigma regarding mental illness in undergraduate nursing students compared to those who attended typical mental health clinical placements. Copyright © 2016 Elsevier Ltd. All rights reserved.

Transcranial direct current stimulation (tDCS) neuromodulatory effects on mechanical hyperalgesia and cortical BDNF levels in ovariectomized rats.

PubMed

da Silva Moreira, Sônia Fátima; Medeiros, Liciane Fernandes; de Souza, Andressa; de Oliveira, Carla; Scarabelot, Vanessa Leal; Fregni, Felipe; Caumo, Wolnei; Torres, Iraci L S

2016-01-15

Epidemiological studies show that painful disorders are more prevalent in women than in men, and the transcranial direct current stimulation (tDCS) technique has been tested in chronic pain states. We explored the effect of tDCS on pain behavior and brain-derived neurotrophic factor (BDNF) levels in ovariectomized rats. Forty-five female Wistar adult rats were distributed into five groups: control (CT), ovariectomy + tDCS (OT), ovariectomy + sham tDCS (OS), sham ovariectomy + tDCS (ST), and sham ovariectomy+shamtDCS (SS). The rats were subjected to cathodal tDCS. The vaginal cytology and the estradiol levels confirmed the hormonal status. In addition, nociceptive behavior was evaluated using the tail-flick, von Frey, and hot-plate tests, as well as the BDNF levels in the serum, hypothalamus, hippocampus, spinal cord, and cerebral cortex. One-way analysis of variance (ANOVA) or two-way ANOVA was used for statistical analysis, followed by the Bonferroni, and P-value b 0.05 was considered significant. The ovariectomized animals presented a hypersensitivity response in the hot-plate (P b 0.01) and von Frey (P b 0.05) tests, as well as increased serum BDNF (P b 0.05) and decreased hypothalamic BDNF (P b 0.01) levels. The OT, OS, ST, and SS groups showed decreased hippocampal BDNF levels as compared with the control group (P b 0.001). The interaction between tDCS and ovariectomy on the cortical BDNF levels (P b 0.01) was observed. The ovariectomy induced nociceptive hypersensitivity and altered serum and hypothalamic BDNF levels. The cathodal tDCS partially reversed nociceptive hypersensitivity.

The effects of academic grouping on student performance in science

NASA Astrophysics Data System (ADS)

Scoggins, Sally Smykla

The current action research study explored how student placement in heterogeneous or homogeneous classes in seventh-grade science affected students' eighth-grade Science State of Texas Assessment of Academic Readiness (STAAR) scores, and how ability grouping affected students' scores based on race and socioeconomic status. The population included all eighth-grade students in the target district who took the regular eighth-grade science STAAR over four academic school years. The researcher ran three statistical tests: a t-test for independent samples, a one-way between subjects analysis of variance (ANOVA) and a two-way between subjects ANOVA. The results showed no statistically significant difference between eighth-grade Pre-AP students from seventh-grade Pre-AP classes and eighth-grade Pre-AP students from heterogeneous seventh-grade classes and no statistically significant difference between Pre-AP students' scores based on socioeconomic status. There was no statistically significant interaction between socioeconomic status and the seventh-grade science classes. The scores between regular eighth-grade students who were in heterogeneous seventh-grade classes were statistically significantly higher than the scores of regular eighth-grade students who were in regular seventh-grade classes. The results also revealed that the scores of students who were White were statistically significantly higher than the scores of students who were Black and Hispanic. Black and Hispanic scores did not differ significantly. Further results indicated that the STAAR Level II and Level III scores were statistically significantly higher for the Pre-AP eighth-grade students who were in heterogeneous seventh-grade classes than the STAAR Level II and Level III scores of Pre-AP eighth-grade students who were in Pre-AP seventh-grade classes.

Power and Sample Size Calculations for Testing Linear Combinations of Group Means under Variance Heterogeneity with Applications to Meta and Moderation Analyses

ERIC Educational Resources Information Center

Shieh, Gwowen; Jan, Show-Li

2015-01-01

The general formulation of a linear combination of population means permits a wide range of research questions to be tested within the context of ANOVA. However, it has been stressed in many research areas that the homogeneous variances assumption is frequently violated. To accommodate the heterogeneity of variance structure, the…

Impact of bleaching agents on water sorption and solubility of resin luting cements.

PubMed

Torabi Ardakani, Mahshid; Atashkar, Berivan; Bagheri, Rafat; Burrow, Michael F

2017-08-01

The aim of the present study was to evaluate the effect of distilled water and home and office bleaching agents on the sorption and solubility of resin luting cements. A total of 18 disc-shaped specimens were prepared from each of four resin cements: G-CEM LinkAce, Panavia F, Rely X Unicem, and seT. Specimens were cured according to the manufacturers' instructions and randomly divided into three groups of six, where they were treated with either an office or home bleaching agent or immersed in distilled water (control). Water sorption and solubility were measured by weighing the specimens before and after immersion and desiccation. Data were analyzed using Pearson correlation coefficient, two-way analysis of variance (ANOVA) and Tukey's test. There was a significant, positive correlation between sorption and solubility. Two-way anova showed significant differences among all resin cements tested for either sorption or solubility. Water sorption and solubility of all cements were affected significantly by office bleaching, and even more by home bleaching agents. Sorption and solubility behavior of the studied cements were highly correlated and significantly affected by applying either office or home bleaching agents; seT showed the highest sorption and solubility, whereas Rely X Unicem revealed the lowest. © 2016 John Wiley & Sons Australia, Ltd.

The effect of coating patterns with spinel-based investment on the castability and porosity of titanium cast into three phosphate-bonded investments.

PubMed

Pieralini, Anelise R F; Benjamin, Camila M; Ribeiro, Ricardo Faria; Scaf, Gulnara; Adabo, Gelson Luis

2010-10-01

This study evaluated the effect of pattern coating with spinel-based investment Rematitan Ultra (RU) on the castability and internal porosity of commercially pure (CP) titanium invested into phosphate-bonded investments. The apparent porosity of the investment was also measured. Square patterns (15 × 15 × 0.3 mm(3)) were either coated with RU, or not and invested into the phosphate-bonded investments: Rematitan Plus (RP), Rema Exakt (RE), Castorit Super C (CA), and RU (control group). The castings were made in an Ar-arc vacuum-pressure machine. The castability area (mm(2) ) was measured by an image-analysis system (n = 10). For internal porosity, the casting (12 × 12 × 2 mm(3) ) was studied by the X-ray method, and the projected porous area percentage was measured by an image-analysis system (n = 10). The apparent porosity of the investment (n = 10) was measured in accordance with the ASTM C373-88 standard. Analysis of variance (One-way ANOVA) of castability was significant, and the Tukey test indicated that RU had the highest mean but the investing technique with coating increased the castability for all phosphate-bonded investments. The analysis of the internal porosity of the cast by the nonparametric test demonstrated that the RP, RE, and CA with coating and RP without coating did not differ from the control group (RU), while the CA and RE casts without coating were more porous. The one-way ANOVA of apparent porosity of the investment was significant, and the Tukey test showed that the means of RU (36.10%) and CA (37.22%) were higher than those of RP (25.91%) and RE (26.02%). Pattern coating with spinel-based material prior to phosphate-bonded investments can influence the castability and the internal porosity of CP Ti. © 2010 by The American College of Prosthodontists.

The Unsupported Upper Limb Exercise Test in People Without Disabilities: Assessing the Within-Day Test-Retest Reliability and the Effects of Age and Gender.

PubMed

Oliveira, Ana; Cruz, Joana; Jácome, Cristina; Marques, Alda

2018-01-01

Purpose: To estimate the within-day test-retest reliability and standard error of measurement (SEM) of the unsupported upper limb exercise test (UULEX) in adults without disabilities and to determine the effects of age and gender on performance of the UULEX. Method: A cross-sectional study was conducted with 100 adults without disabilities (44 men, mean age 44.2 [SD 26] y; 56 women, mean age 38.1 [SD 24.1] y). Participants performed three UULEX tests to establish within-day reliability, measured using an intra-class correlation coefficient (ICC) model 2 (two-way random effects) with a single rater (ICC[2,1]) and SEM. The effects of age and gender were examined using two-factor mixed-design analysis of variance (ANOVA) and one-way repeated-measures ANOVA. For analysis purposes, four sub-groups were created: younger adults, older adults, men, and women. Results: Excellent within-day reliability and a small SEM were found in the four sub-groups (younger adults: ICC[2,1]=0.88; 95% CI: 0.82, 0.92; SEM∼40 s; older adults: ICC[2,1]=0.82; 95% CI: 0.72, 0.90; SEM∼50 s; men: ICC[2,1]=0.93; 95% CI: 0.88, 0.96; SEM∼30 s; women: ICC[2,1]=0.85; 95% CI: 0.78, 0.91; SEM∼45 s). Younger adults took, on average, 308.24 seconds longer than older adults to perform the test; older adults performed significantly better on the third test ( p <0.0001; η 2 =0.096). Gender effects were not found ( p >0.05). Conclusion: The within-day test-retest reliability and SEM values of the UULEX may be used to define the magnitude of the error obtained with repeated measures. One UULEX test seems to be adequate for younger adults to achieve reliable results, whereas three tests seem to be needed for older adults.

Differential Effects of the Catechol-O-Methyltransferase Val158Met Genotype on the Cognitive Function of Schizophrenia Patients and Healthy Japanese Individuals

PubMed Central

Tsuchimine, Shoko; Yasui-Furukori, Norio; Kaneda, Ayako; Kaneko, Sunao

2013-01-01

Background The functional polymorphism Val158Met in the catechol-O-methyltransferase (COMT) gene has been associated with differences in prefrontal cognitive functions in patients with schizophrenia and healthy individuals. Several studies have indicated that the Met allele is associated with better performance on measures of cognitive function. We investigated whether the COMT Val158Met genotype was associated with cognitive function in 149 healthy controls and 118 patients with schizophrenia. Methods Cognitive function, including verbal memory, working memory, motor speed, attention, executive function and verbal fluency, was assessed by the Brief Assessment of Cognition in Schizophrenia (BACS-J). We employed a one-way analysis of variance (ANOVA) and a multiple regression analysis to determine the associations between the COMT Val158Met genotype and the BACS-J measurements. Results The one-way ANOVA revealed a significant difference in the scores on the Tower of London, a measure of executive function, between the different Val158Met genotypes in the healthy controls (p = 0.023), and a post-hoc analysis showed significant differences between the scores on the Tower of London in the val/val genotype group (18.6 ± 2.4) compared to the other two groups (17.6 ± 2.7 for val/met and 17.1 ± 3.2 for met/met; p = 0.027 and p = 0.024, respectively). Multiple regression analyses revealed that executive function was significantly correlated with the Val158Met genotype (p = 0.003). However, no evidence was found for an effect of the COMT on any cognitive domains of the BACS-J in the patients with schizophrenia. Conclusion These data support the hypothesis that the COMT Val158Met genotype maintains an optimal level of dopamine activity. Further studies should be performed that include a larger sample size and include patients on and off medication, as these patients would help to confirm our findings. PMID:24282499

Marginal fit of all-ceramic crowns fabricated using two extraoral CAD/CAM systems in comparison with the conventional technique

PubMed Central

Alqahtani, Fawaz

2017-01-01

Objective The purpose of this study was to determine the effect of two extraoral computer-aided design (CAD) and computer-aided manufacturing (CAM) systems, in comparison with conventional techniques, on the marginal fit of monolithic CAD/CAM lithium disilicate ceramic crowns. Study design This is an in vitro interventional study. Place and duration of study The study was carried out at the Department of Prosthodontics, School of Dentistry, Prince Sattam Bin Abdul-Aziz University, Saudi Arabia, from December 2015 to April 2016. Methodology A marginal gap of 60 lithium disilicate crowns was evaluated by scanning electron microscopy. In total, 20 pressable lithium disilicate (IPS e.max Press [Ivoclar Vivadent]) ceramic crowns were fabricated using the conventional lost-wax technique as a control group. The experimental all-ceramic crowns were produced based on a scan stone model and milled using two extraoral CAD/CAM systems: the Cerec group was fabricated using the Cerec CAD/CAM system, and the Trios group was fabricated using Trios CAD and milled using Wieland Zenotec CAM. One-way analysis of variance (ANOVA) and the Scheffe post hoc test were used for statistical comparison of the groups (α=0.05). Results The mean (±standard deviation) of the marginal gap of each group was as follows: the Control group was 91.15 (±15.35) µm, the Cerec group was 111.07 (±6.33) µm, and the Trios group was 60.17 (±11.09) µm. One-way ANOVA and the Scheffe post hoc test showed a statistically significant difference in the marginal gap between all groups. Conclusion It can be concluded from the current study that all-ceramic crowns, fabricated using the CAD/CAM system, show a marginal accuracy that is acceptable in clinical environments. The Trios CAD group displayed the smallest marginal gap. PMID:28352204

Effects of UGT1A9 genetic polymorphisms on monohydroxylated derivative of oxcarbazepine concentrations and oxcarbazepine monotherapeutic efficacy in Chinese patients with epilepsy.

PubMed

Lu, Yao; Fang, Youxin; Wu, Xunyi; Ma, Chunlai; Wang, Yue; Xu, Lan

2017-03-01

The human UDP-glucuronosyltransferase which is genetically polymorphic catalyzes glucuronidations of various drugs. The interactions among UGT1A4, UGT1A6, UGT1A9, and UGT2B15 genetic polymorphisms, monohydroxylated derivative (MHD) of oxcarbazepine (OXC) plasma concentrations, and OXC monotherapeutic efficacy were explored in 124 Chinese patients with epilepsy receiving OXC monotherapy. MHD is the major active metabolite of OXC, and its plasma concentration was measured using high-performance liquid chromatography when patients reached their maintenance dose of OXC. Genomic DNA was extracted from whole blood and SNP genotyping performed using PCR followed by dideoxy chain termination sequencing. We followed the patients for at least 1 year to evaluate the OXC monotherapy efficacy. Patients were divided into two groups according to their therapeutic outcome: group 1, seizure free; group 2, not seizure free. The data were analyzed using T test, one-way analysis of variance (ANOVA), Kruskal-Wallis test, chi-square test, Fisher's exact test, correlation analysis, and multivariate regression analysis. T test analysis showed that MHD plasma concentrations were significantly different between the two groups (p = 0.002). One-way ANOVA followed by Bonferroni post hoc testing of four candidate SNPs revealed that carriers of the UGT1A9 variant allele I399 C > T (TT 13.28 ± 7.44 mg/L, TC 16.41 ± 6.53 mg/L) had significantly lower MHD plasma concentrations and poorer seizure control than noncarriers (CC 22.24 ± 8.49 mg/L, p < 0.05). In our study, we have demonstrated the effects of UGT1A9 genetic polymorphisms on MHD plasma concentrations and OXC therapeutic efficacy. Through MHD monitoring, we can predict OXC therapeutic efficacy, which may be useful for the personalization of OXC therapy in epileptic patients.

Colour stability of aesthetic brackets: ceramic and plastic.

PubMed

Filho, Hibernon Lopes; Maia, Lúcio Henrique; Araújo, Marcus V; Eliast, Carlos Nelson; Ruellas, Antônio Carlos O

2013-05-01

The colour stability of aesthetic brackets may differ according to their composition, morphology and surface property, which may consequently influence their aesthetic performance. To assess the colour stability of aesthetic brackets (ceramic and plastic) after simulating aging and staining. Twelve commercially manufactured ceramic brackets and four different plastic brackets were assessed. To determine possible colour change (change of E*(ab)) and the value of the NBS (National Bureau of Standards) unit system, spectrophotometric colour measurements for CIE L*, a* and b* were taken before and after the brackets were aged and stained. Statistical analysis was undertaken using a one-way ANOVA analysis of variance and a Tukey multiple comparison test (alpha = 0.05). The colour change between the various (ceramic and plastic) materials was not significant (p > 0.05), but still varied significantly (p < 0.001) between the brackets of the same composition or crystalline structure and among commercial brands. Colour stability cannot be confirmed simply by knowing the type of material and crystalline composition or structure.

[The Influence of Subjective Health Status, Post-Traumatic Growth, and Social Support on Successful Aging in Middle-Aged Women].

PubMed

Lee, Seung Hee; Jang, Hyung Suk; Yang, Young Hee

2016-10-01

This study was done to investigate factors influencing successful aging in middle-aged women. A convenience sample of 103 middle-aged women was selected from the community. Data were collected using a structured questionnaire and analyzed using descriptive statistics, two-sample t-test, one-way ANOVA, Kruskal Wallis test, Pearson correlations, Spearman correlations and multiple regression analysis with the SPSS/WIN 22.0 program. Results of regression analysis showed that significant factors influencing successful aging were post-traumatic growth and social support. This regression model explained 48% of the variance in successful aging. Findings show that the concept 'post-traumatic growth' is an important factor influencing successful aging in middle-aged women. In addition, social support from friends/co-workers had greater influence on successful aging than social support from family. Thus, we need to consider the positive impact of post-traumatic growth and increase the chances of social participation in a successful aging program for middle-aged women.

[Factors Influencing Burnout among Mothers of Children with Cerebral Palsy].

PubMed

Seo, Ji Young; Lee, Hae Jin; You, Mi Ae

2017-04-01

The purpose of this study was to examine the effects of parental stress, social support, and coping behavior on burnout among mothers caring for children with cerebral palsy. Participants in this cross-sectional, descriptive study were 185 mothers who completed a self-report structured questionnaire. The data were analyzed using descriptive statistics, t-test, one-way ANOVA, correlation and multiple linear regression analyses with IBM SPSS Win 22 program. Parental stress and coping behavior were strong predictors of burnout among mothers of children with cerebral palsy. These variables explained 50.0% of the variance in burnout. Social support was not a predictor of burnout. A higher level of burnout was associated with higher levels of parental stress and lower levels of social support and coping behavior. Mothers of children with cerebral palsy are vulnerable to burnout. These results show that effective strategies for reducing parental stress and improving positive coping behavior are needed to reduce burnout in these mothers. © 2017 Korean Society of Nursing Science

Solubility of a new calcium silicate-based root-end filling material

PubMed Central

Singh, Shishir; Podar, Rajesh; Dadu, Shifali; Kulkarni, Gaurav; Purba, Rucheet

2015-01-01

Introduction: The purpose of this study was to compare solubility of a new calcium silicate-based cement, Biodentine with three commonly used root-end filling materials viz. glass-ionomer cement (GIC), intermediate restorative material (IRM), and mineral trioxide aggregate (MTA). Materials and Methods: Twenty stainless steel ring molds were filled with cements corresponding to four groups (n = 5). The weight of 20 dried glass bottles was recorded. Samples were transferred to bottles containing 5 ml of distilled water and stored for 24 h. The bottles were dried at 105΀C and weighed. This procedure was repeated for 3, 10, 30, and 60 days. Data was analyzed with one-way analysis of variance (ANOVA) test (P < 0.05). Results: Biodentine demonstrated significantly higher solubility than MTA for 30- and 60-day immersion periods. Statistical difference was noted between the solubility values of Biodentine samples amongst each of the five time intervals. Conclusions: Biodentine exhibited higher solubility in comparison with all other cements. PMID:25829696

The relationship between English language learning strategies and gender among pre-university students: An overview of UMS

NASA Astrophysics Data System (ADS)

Kiram, Johannah Jamalul; Sulaiman, Jumat; Swanto, Suyansah; Din, Wardatul Akmam

2014-06-01

This study aims to analyze the effects psychological gender differences on the relationship between language learning strategies and their proficiency in English language for pre-university students. Previous researchers found that the more employment of language learning strategies, the more successful the learners are and those with higher level of strategy use are female rather than male. In this study, fifty-six pre-university students (22 males, 34 females) of University Malaysia Sabah participated in this study. Oxford's Strategy Inventory for Language Learning (SILL) self-report questionnaire was adopted to identify the students' language learning strategies, whereas their proficiencies were based on their Malaysian University English Test (MUET) results. Pearson's correlation coefficient, one-way analysis of variance (ANOVA) and the t-test were utilized to make statistical interpretation about the relationship. The knowledge obtained from this study will be helpful for future studies on how to improve the quality of learning and proficiency in English.

Effect of trapidil in myocardial ischemia-reperfusion injury in rabbit.

PubMed

Liu, Mingjie; Sun, Qi; Wang, Qiang; Wang, Xiuying; Lin, Peng; Yang, Ming; Yan, Yuanyuan

2014-01-01

To evaluate the cardioprotective effects of trapidil on myocardial ischemia-reperfusion injury (MIRI) in rabbits. Rabbits were subjected to 40 min of myocardial ischemia followed by 120 min of reperfusion. Blood for superoxide dismutase (SOD) and malondialdehyde (MDA) were estimated. At the end of reperfusion, the rabbits were sacrificed and the hearts were isolated for histological examination. An apoptotic index (AI) was determined using the terminal deoxynucleotidyl transferase (TdT)-mediated dUTP nick-end-labeling (TUNEL) method. The expression of apoptosis-related proteins Bax and Bcl-2 was analyzed using immunohistochemistry. Statistical analyses were performed by one-way analysis of variance (ANOVA), P < 0.05 considered statistically significant. Trapidil caused a significant (P < 0.05) increase in SOD activity, as decreased MDA levels and significantly (P < 0.05) reduced the expression of Bax as compared with the ischemia-reperfusion (IR) control group. Trapidil may attenuate the myocardial damage produced by IR injury and offer potential cardioprotective action.

Exploring the Theory of Planned Behavior to Explain Sugar-Sweetened Beverage Consumption

PubMed Central

Estabrooks, Paul; Davy, Brenda; Chen, Yvonnes; You, Wendy

2011-01-01

Objective To describe sugar-sweetened beverage (SSB) consumption, establish psychometric properties and utility of a Theory of Planned Behavior (TPB) instrument for SSB consumption. Methods This cross-sectional survey included 119 southwest Virginia participants. Respondents were majority female (66%), white (89%), ≤ high school education (79%), and averaged 41.4 (±13.5) years. A validated beverage questionnaire was used to measure SSB. Eleven TPB constructs were assessed with a 56-item instrument. Analyses included descriptive statistics, one-way ANOVAs, Cronbach alphas, and multiple regressions. Results Sugar-sweetened beverage intake averaged 457 (±430) kilocalories/day. The TPB model provided a moderate explanation of SSB intake (R2=0.38; F=13.10, P<0.01). Behavioral intentions had the strongest relationships with SSB consumption, followed by attitudes, perceived behavioral control, and subjective norms. The six belief constructs did not predict significant variance in the models. Conclusions and Implications Future efforts to comprehensively develop and implement interventions guided by the TPB hold promise for reducing SSB intake. PMID:22154130

Terrestrial gamma radiation dose (TGRD) levels in northern zone of Jos Plateau, Nigeria: Statistical relationship between dose rates and geological formations

NASA Astrophysics Data System (ADS)

Abba, Habu Tela; Hassan, Wan Muhamad Saridan Wan; Saleh, Muneer Aziz; Aliyu, Abubakar Sadiq; Ramli, Ahmad Termizi

2017-11-01

In- situ measurement of terrestrial gamma radiation dose rates (TGRD) was conducted in northern zone of Jos Plateau and a statistical relationship between the TGRD and the underlying geological formations was investigated. The TGRD rates in all the measurements ranged from 40 to 1265 nGy h-1 with a mean value of 250 nGy h-1. The maximum TGDR was recorded on geological type G8 (Younger Granites) at Bisitchi, and the lowest TGDR was recorded on G6 (Basaltic rocks) at Gabia. One way analysis of variance (ANOVA) statistical test was used to compared the data. Significantly, the results of this study inferred a strong relationship between TGRD levels with geological structures of a place. An isodose map was plotted to represent exposure rates due to TGRD. The results of this investigation could be useful for multiple public interest such as evaluating public dose for the area.

The effect of yoga in stress reduction for dental students performing their first periodontal surgery: A randomized controlled study

PubMed Central

Shankarapillai, Rajesh; Nair, Manju Anathakrishnan; George, Roy

2012-01-01

Context: The dental students experience a lot of stress, which increase when they perform their first surgical procedure. Yoga as an anxiolytic tool in anxiety reduction has been practiced over centuries in India. Aim: To assess the efficacy of yoga in reducing the state trait anxiety of dental students before their first periodontal surgery performance. Settings and Design: A randomized controlled study using a two-way split plot design (pre-post-test) was conducted in the department of periodontics, Pacific Dental College, Udaipur, India. Materials and Methods: One hundred clinical dental students who were ready to perform their first periodontal surgery were selected. Students were randomly assigned to two groups and were given a 60-min session on stress reduction. Group A, yogic intervention group, were instructed to do yoga and their performances were monitored for a period of one week and Group B, control group, were given a lecture on stress reduction without any yoga instructions. The investigator who was unaware of the groups had taken the state trait anxiety score of the students three times a) before assigning them to each group, b) prior to the surgical procedure and c) immediately after the performance of surgery. Statistical Analysis Used: Analyses of variance (ANOVA) by SPSS V.16. Results: The statistical results showed a significant reduction in the VAS and state trait anxiety of Group A compared to Group B (ANOVA; P<0.001). Conclusions: This study concludes that Yogic breathing has a significant effect on the reduction of state trait anxiety level of dental students. PMID:22346066

Electronic Health Use in the European Union and the Effect of Multimorbidity: Cross-Sectional Survey.

PubMed

Lupiáñez-Villanueva, Francisco; Anastasiadou, Dimitra; Codagnone, Cristiano; Nuño-Solinís, Roberto; Garcia-Zapirain Soto, Maria Begona

2018-05-03

Multimorbidity is becoming increasingly common and is a leading challenge currently faced by societies with aging populations. The presence of multimorbidity requires patients to coordinate, understand, and use the information obtained from different health care professionals, while simultaneously striving to distinguish the symptoms of different diseases and self-manage their sometimes conflicting health problems. Electronic health (eHealth) tools provide a means to disseminate health information and education for both patients and health professionals and hold promise for more efficient and cost-effective care processes. The aim of this study was to analyze the use of eHealth tools, taking into account the citizens' sociodemographic and clinical characteristics, and above all, the presence of multimorbidity. Cross-sectional and exploratory research was conducted using online survey data from July 2011 to August 2011. Participants included a total of 14,000 citizens from 14 European countries aged 16 to 74 years, who had used an eHealth tool in the past 3 months. The variables studied were sociodemographic variables of the participants, the questionnaire items assessing the frequency of using eHealth tools, the degree of morbidity, and the eHealth adoption gradient. Chi-square tests were conducted to examine the relationship between the sociodemographic and clinical variables of participants and the group the participants were assigned to according to their frequency of eHealth use (eHealth user group). A one-way analysis of variance (ANOVA) allowed for assessing the differences in the eHealth adoption gradient average between different groups of individuals according to their morbidity level. A two-way between-groups ANOVA was performed to explore the effects of multimorbidity and age group on the eHealth adoption gradient. According to the eHealth adoption gradient, most participants (68.15%, 9541/14,000) were labeled as rare users, with the majority of them (55.1%, 508/921) being in the age range of 25 to 54 years, with upper secondary education (50.3%, 464/921), currently employed (49.3%, 454/921), and living in medium-sized cities (40.7%, 375/921). Results of the one-way ANOVA showed that the number of health problems significantly affected the use of eHealth tools (F 2,13996 =11.584; P<.001). The two-way ANOVA demonstrated that there was a statistically significant interaction between the effects of age and number of health problems on the eHealth adoption gradient (F 4,11991 =7.936; P<.001). The eHealth adoption gradient has proven to be a reliable way to measure different aspects of eHealth use. Multimorbidity is associated with a more intense use of eHealth, with younger Internet users using new technologies for health purposes more frequently than older groups with the same level of morbidity. These findings suggest the need to consider different strategies aimed at making eHealth tools more sensitive to the characteristics of older populations to reduce digital disadvantages. ©Francisco Lupiáñez-Villanueva, Dimitra Anastasiadou, Cristiano Codagnone, Roberto Nuño-Solinís, Maria Begona Garcia-Zapirain Soto. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 03.05.2018.

Cognitive functioning and insight in schizophrenia and in schizoaffective disorder.

PubMed

Birindelli, Nadia; Montemagni, Cristiana; Crivelli, Barbara; Bava, Irene; Mancini, Irene; Rocca, Paola

2014-01-01

The aim of this study was to investigate cognitive functioning and insight of illness in two groups of patients during their stable phases, one with schizophrenia and one with schizoaffective disorder. We recruited 104 consecutive outpatients, 64 with schizophrenia, 40 with schizoaffective disorder, in the period between July 2010 and July 2011. They all fulfilled formal Diagnostic and Statistical Manual of Mental disorders (DSM-IV-TR) diagnostic criteria for schizophrenia and schizoaffective disorder. Psychiatric assessment included the Clinical Global Impression Scale-Severity (CGI-S), the Positive and Negative Sindrome Scale (PANSS), the Calgary Depression Scale for Schizophrenia (CDSS) and the Global Assessment of Functioning (GAF). Insight of illness was evaluated using SUMD. Neuropsychological assessment included Winsconsin Card Sorting Test (WCST), California Verbal Learning Test (CVLT), Stroop Test and Trail Making Test (TMT). Differences between the groups were tested using Chi-square test for categorical variables and one-way analysis of variance (ANOVA) for continuous variables. All variables significantly different between the two groups of subjects were subsequently analysed using a logistic regression with a backward stepwise procedure using diagnosis (schizophrenia/schizoaffective disorder) as dependent variable. After backward selection of variables, four variables predicted a schizoaffective disorder diagnosis: marital status, a higher number of admission, better attentive functions and awareness of specific signs or symptoms of disease. The prediction model accounted for 55% of the variance of schizoaffective disorder diagnosis. With replication, our findings would allow higher diagnostic accuracy and have an impact on clinical decision making, in light of an amelioration of vocational functioning.

Eta Squared, Partial Eta Squared, and Misreporting of Effect Size in Communication Research.

ERIC Educational Resources Information Center

Levine, Timothy R.; Hullett, Craig R.

2002-01-01

Alerts communication researchers to potential errors stemming from the use of SPSS (Statistical Package for the Social Sciences) to obtain estimates of eta squared in analysis of variance (ANOVA). Strives to clarify issues concerning the development and appropriate use of eta squared and partial eta squared in ANOVA. Discusses the reporting of…

An augmented classical least squares method for quantitative Raman spectral analysis against component information loss.

PubMed

Zhou, Yan; Cao, Hui

2013-01-01

We propose an augmented classical least squares (ACLS) calibration method for quantitative Raman spectral analysis against component information loss. The Raman spectral signals with low analyte concentration correlations were selected and used as the substitutes for unknown quantitative component information during the CLS calibration procedure. The number of selected signals was determined by using the leave-one-out root-mean-square error of cross-validation (RMSECV) curve. An ACLS model was built based on the augmented concentration matrix and the reference spectral signal matrix. The proposed method was compared with partial least squares (PLS) and principal component regression (PCR) using one example: a data set recorded from an experiment of analyte concentration determination using Raman spectroscopy. A 2-fold cross-validation with Venetian blinds strategy was exploited to evaluate the predictive power of the proposed method. The one-way variance analysis (ANOVA) was used to access the predictive power difference between the proposed method and existing methods. Results indicated that the proposed method is effective at increasing the robust predictive power of traditional CLS model against component information loss and its predictive power is comparable to that of PLS or PCR.

A comparison of teacher and principal perception of an outstanding biology teacher

NASA Astrophysics Data System (ADS)

Searles, William E.; Ng, Raymond W. M.

The purpose of this study was to ascertain the level of agreement or disagreement between principals and teachers when using established criteria to measure the effectiveness of a biology teacher. To obtain information regarding their perceptions of an outstanding biology teacher, twenty-two principals and forty-one biology teachers were chosen randomly from English-speaking high schools within a 50 km radius of metropolitan Montreal, Quebec, Canada. The measuring instrument was a modified version of Dieter's questionnaire that evolved from his doctoral study of the National Association of Biology Teachers-Outstanding Biology Teacher Award Program. The data collected from the two populations were tested using one-way ANOVA (analysis of variance) or by applying normal approximation. Results indicated that both the principals and teachers agree on the relative importance of most criteria, particularly those related to the teacher's classroom behavior and academic background in biology. From such results, it was possible to construct one stereotype of the outstanding biology teacher. A number of recommendations were made from the results of the study, which were directed to the (a) teachers and their professional organization, (b) principals and the school boards, (c) teacher training institutions, and (d) researchers in teacher evaluation.

Statistical analysis of Skylab 3. [endocrine/metabolic studies of astronauts

NASA Technical Reports Server (NTRS)

Johnston, D. A.

1974-01-01

The results of endocrine/metabolic studies of astronauts on Skylab 3 are reported. One-way analysis of variance, contrasts, two-way unbalanced analysis of variance, and analysis of periodic changes in flight are included. Results for blood tests, and urine tests are presented.

A LISREL Model for the Analysis of Repeated Measures with a Patterned Covariance Matrix.

ERIC Educational Resources Information Center

Rovine, Michael J.; Molenaar, Peter C. M.

1998-01-01

Presents a LISREL model for the estimation of the repeated measures analysis of variance (ANOVA) with a patterned covariance matrix. The model is demonstrated for a 5 x 2 (Time x Group) ANOVA in which the data are assumed to be serially correlated. Similarities with the Statistical Analysis System PROC MIXED model are discussed. (SLD)

A Didactic Experience of Statistical Analysis for the Determination of Glycine in a Nonaqueous Medium Using ANOVA and a Computer Program

ERIC Educational Resources Information Center

Santos-Delgado, M. J.; Larrea-Tarruella, L.

2004-01-01

The back-titration methods are compared statistically to establish glycine in a nonaqueous medium of acetic acid. Important variations in the mean values of glycine are observed due to the interaction effects between the analysis of variance (ANOVA) technique and a statistical study through a computer software.

Repeatability and reproducibility of ribotyping and its computer interpretation.

PubMed

Lefresne, Gwénola; Latrille, Eric; Irlinger, Françoise; Grimont, Patrick A D

2004-04-01

Many molecular typing methods are difficult to interpret because their repeatability (within-laboratory variance) and reproducibility (between-laboratory variance) have not been thoroughly studied. In the present work, ribotyping of coryneform bacteria was the basis of a study involving within-gel and between-gel repeatability and between-laboratory reproducibility (two laboratories involved). The effect of different technical protocols, different algorithms, and different software for fragment size determination was studied. Analysis of variance (ANOVA) showed, within a laboratory, that there was no significant added variance between gels. However, between-laboratory variance was significantly higher than within-laboratory variance. This may be due to the use of different protocols. An experimental function was calculated to transform the data and make them compatible (i.e., erase the between-laboratory variance). The use of different interpolation algorithms (spline, Schaffer and Sederoff) was a significant source of variation in one laboratory only. The use of either Taxotron (Institut Pasteur) or GelCompar (Applied Maths) was not a significant source of added variation when the same algorithm (spline) was used. However, the use of Bio-Gene (Vilber Lourmat) dramatically increased the error (within laboratory, within gel) in one laboratory, while decreasing the error in the other laboratory; this might be due to automatic normalization attempts. These results were taken into account for building a database and performing automatic pattern identification using Taxotron. Conversion of the data considerably improved the identification of patterns irrespective of the laboratory in which the data were obtained.

The Partitioning of Variance Habits of Correlational and Experimental Psychologists: The Two Disciplines of Scientific Psychology Revisited

ERIC Educational Resources Information Center

Krus, David J.; Krus, Patricia H.

1978-01-01

The conceptual differences between coded regression analysis and traditional analysis of variance are discussed. Also, a modification of several SPSS routines is proposed which allows for direct interpretation of ANOVA and ANCOVA results in a form stressing the strength and significance of scrutinized relationships. (Author)

Bias and robustness of uncertainty components estimates in transient climate projections

NASA Astrophysics Data System (ADS)

Hingray, Benoit; Blanchet, Juliette; Jean-Philippe, Vidal

2016-04-01

A critical issue in climate change studies is the estimation of uncertainties in projections along with the contribution of the different uncertainty sources, including scenario uncertainty, the different components of model uncertainty and internal variability. Quantifying the different uncertainty sources faces actually different problems. For instance and for the sake of simplicity, an estimate of model uncertainty is classically obtained from the empirical variance of the climate responses obtained for the different modeling chains. These estimates are however biased. Another difficulty arises from the limited number of members that are classically available for most modeling chains. In this case, the climate response of one given chain and the effect of its internal variability may be actually difficult if not impossible to separate. The estimate of scenario uncertainty, model uncertainty and internal variability components are thus likely to be not really robust. We explore the importance of the bias and the robustness of the estimates for two classical Analysis of Variance (ANOVA) approaches: a Single Time approach (STANOVA), based on the only data available for the considered projection lead time and a time series based approach (QEANOVA), which assumes quasi-ergodicity of climate outputs over the whole available climate simulation period (Hingray and Saïd, 2014). We explore both issues for a simple but classical configuration where uncertainties in projections are composed of two single sources: model uncertainty and internal climate variability. The bias in model uncertainty estimates is explored from theoretical expressions of unbiased estimators developed for both ANOVA approaches. The robustness of uncertainty estimates is explored for multiple synthetic ensembles of time series projections generated with MonteCarlo simulations. For both ANOVA approaches, when the empirical variance of climate responses is used to estimate model uncertainty, the bias is always positive. It can be especially high with STANOVA. In the most critical configurations, when the number of members available for each modeling chain is small (< 3) and when internal variability explains most of total uncertainty variance (75% or more), the overestimation is higher than 100% of the true model uncertainty variance. The bias can be considerably reduced with a time series ANOVA approach, owing to the multiple time steps accounted for. The longer the transient time period used for the analysis, the larger the reduction. When a quasi-ergodic ANOVA approach is applied to decadal data for the whole 1980-2100 period, the bias is reduced by a factor 2.5 to 20 depending on the projection lead time. In all cases, the bias is likely to be not negligible for a large number of climate impact studies resulting in a likely large overestimation of the contribution of model uncertainty to total variance. For both approaches, the robustness of all uncertainty estimates is higher when more members are available, when internal variability is smaller and/or the response-to-uncertainty ratio is higher. QEANOVA estimates are much more robust than STANOVA ones: QEANOVA simulated confidence intervals are roughly 3 to 5 times smaller than STANOVA ones. Excepted for STANOVA when less than 3 members is available, the robustness is rather high for total uncertainty and moderate for internal variability estimates. For model uncertainty or response-to-uncertainty ratio estimates, the robustness is conversely low for QEANOVA to very low for STANOVA. In the most critical configurations (small number of member, large internal variability), large over- or underestimation of uncertainty components is very thus likely. To propose relevant uncertainty analyses and avoid misleading interpretations, estimates of uncertainty components should be therefore bias corrected and ideally come with estimates of their robustness. This work is part of the COMPLEX Project (European Collaborative Project FP7-ENV-2012 number: 308601; http://www.complex.ac.uk/). Hingray, B., Saïd, M., 2014. Partitioning internal variability and model uncertainty components in a multimodel multireplicate ensemble of climate projections. J.Climate. doi:10.1175/JCLI-D-13-00629.1 Hingray, B., Blanchet, J. (revision) Unbiased estimators for uncertainty components in transient climate projections. J. Climate Hingray, B., Blanchet, J., Vidal, J.P. (revision) Robustness of uncertainty components estimates in climate projections. J.Climate

Robustness of S1 statistic with Hodges-Lehmann for skewed distributions

NASA Astrophysics Data System (ADS)

Ahad, Nor Aishah; Yahaya, Sharipah Soaad Syed; Yin, Lee Ping

2016-10-01

Analysis of variance (ANOVA) is a common use parametric method to test the differences in means for more than two groups when the populations are normally distributed. ANOVA is highly inefficient under the influence of non- normal and heteroscedastic settings. When the assumptions are violated, researchers are looking for alternative such as Kruskal-Wallis under nonparametric or robust method. This study focused on flexible method, S1 statistic for comparing groups using median as the location estimator. S1 statistic was modified by substituting the median with Hodges-Lehmann and the default scale estimator with the variance of Hodges-Lehmann and MADn to produce two different test statistics for comparing groups. Bootstrap method was used for testing the hypotheses since the sampling distributions of these modified S1 statistics are unknown. The performance of the proposed statistic in terms of Type I error was measured and compared against the original S1 statistic, ANOVA and Kruskal-Wallis. The propose procedures show improvement compared to the original statistic especially under extremely skewed distribution.

Microshear bond strength of composite resins to enamel and porcelain substrates utilizing unfilled versus filled resins.

PubMed

Najafi-Abrandabadi, Ahmad; Najafi-Abrandabadi, Siamak; Ghasemi, Amir; Kotick, Philip G

2014-11-01

Failures such as marginal discoloration and composite chipping are still the problems of tooth-colored restorations on the substrate of enamel and porcelain, which some of these problems are consequently as a result of failures in the bonding layer. Using filled resin has been recently introduced to increase the bond strength of this layer. The aim of this study was to compare the microshear bond strength (μ-SBS) of composite resins to enamel incubated in periods of 24 h and 9 months and porcelain with unfilled resin and flowable composites (filled resin). In this in vitro study, two groups of 75 enamel samples with different storage times (24 h and 9 months) and a group of 75 porcelain samples were used. They were divided into 5 experimental groups of 15 samples in each. Composite cylinders in tygon tubes were bonded on the surface of acid-etched enamel and pretreated porcelain. Wave, Wave MV, Wave HV, Grandioflow and Margin Bond were used as bonding agents. The μ-SBS was measured at the speed of 1.0 mm/min. The bond strengths were analyzed with one-way analysis of variance (ANOVA) test followed by Tukey test. P < 0.05 was selected as the level of statistical significance in this study. The results showed that for enamel (24 h), the μ-SBS of the Wave MV and Wave HV groups were significantly lower than the Margin Bond group. Tukey test indicated the absence of a significant difference between the μ-SBS of the Wave group and the Margin Bond group. However, the μ-SBS of the Grandioflow group was significantly higher than the one for the Margin Bond as a bonding agent. In enamel (9 months), there was a significant difference between the Grandioflow and Margin Bond groups. Regarding bonding to the porcelain the one-way ANOVA test did not show a significant difference among the groups. This study revealed that flowable composites (filled resins) can be used instead of unfilled resins in bonding composite resins to enamel and porcelain substrates.

Presence of PSA auto-antibodies in men with prostate abnormalities (prostate cancer/benign prostatic hyperplasia/prostatitis).

PubMed

Lokant, M T; Naz, R K

2015-04-01

Prostate-specific antigen (PSA), produced by the prostate, liquefies post-ejaculate semen. PSA is detected in semen and blood. Increased circulating PSA levels indicate prostate abnormality [prostate cancer (PC), benign prostatic hyperplasia (BPH), prostatitis (PTIS)], with variance among individuals. As the prostate has been proposed as an immune organ, we hypothesise that variation in PSA levels among men may be due to presence of auto-antibodies against PSA. Sera from healthy men (n = 28) and men having prostatitis (n = 25), BPH (n = 30) or PC (n = 29) were tested for PSA antibody presence using enzyme-linked immunosorbent assay (ELISA) values converted to standard deviation (SD) units, and Western blotting. Taking ≥2 SD units as cut-off for positive immunoreactivity, 0% of normal men, 0% with prostatitis, 33% with BPH and 3.45% with PC demonstrated PSA antibodies. One-way analysis of variance (anova) performed on the mean absorbance values and SD units of each group showed BPH as significantly different (P < 0.01) compared with PC and prostatitis. All others were nonsignificant (P < 0.05). Men (33%) with BPH had PSA antibodies by ELISA and Western blot. These discoveries may find clinical application in differential diagnosis among prostate abnormalities, especially differentiating BPH from prostate cancer and prostatitis. © 2014 Blackwell Verlag GmbH.

Measurements for certification of chlortetracycline reference materials within the European Union Standards, Measurements and Testing programme.

PubMed

Juhel-Gaugain, M; McEvoy, J D; VanGinkel, L A

2000-12-01

The experimental design of a material certification programme is described. The matrix reference materials (RMs) comprised chlortetracycline (CTC)-containing and CTC-free lyophilised porcine liver, kidney and muscle produced under the European Commission's Standards Measurements and Testing (SMT) programme. The aim of the certification programme was to determine accurately and precisely the concentration of CTC and 4-epi-chlortetracycline (epi-CTC) contained in the RMs. A multi-laboratory approach was used to certify analyte concentrations. Participants (n = 19) were instructed to strictly adhere to previously established guidelines. Following the examination of analytical performance criteria, statistical manipulation of results submitted by 13 laboratories, (6 withdrew) allowed an estimate to be made of the true value of the analyte content. The Nalimov test was used for detection of outlying results. The Cochran and Bartlett tests were employed for testing the homogeneity of variances. The normality of results distribution was tested according to the Kolmogorov-Smirnov-Lilliefors test. One-way analysis of variance (ANOVA) was employed to calculate the within and between-laboratory standard deviations, the overall mean and confidence interval for the CTC and epi-CTC content of each of the RMs. Certified values were within or very close to the target concentration ranges specified in the SMT contract. These studies have demonstrated the successful production and certification of CTC-containing and CTC-free porcine RMs.

Male Saudi Arabian freshman science majors at Jazan University: Their perceptions of parental educational practices on their science achievements

NASA Astrophysics Data System (ADS)

Alrehaly, Essa D.

Examination of Saudi Arabian educational practices is scarce, but increasingly important, especially in light of the country's pace in worldwide mathematics and science rankings. The purpose of the study is to understand and evaluate parental influence on male children's science education achievements in Saudi Arabia. Parental level of education and participant's choice of science major were used to identify groups for the purpose of data analysis. Data were gathered using five independent variables concerning parental educational practices (attitude, involvement, autonomy support, structure and control) and the dependent variable of science scores in high school. The sample consisted of 338 participants and was arbitrarily drawn from the science-based colleges (medical, engineering, and natural science) at Jazan University in Saudi Arabia. The data were tested using Pearson's analysis, backward multiple regression, one way ANOVA and independent t-test. The findings of the study reveal significant correlations for all five of the variables. Multiple regressions revealed that all five of the parents' educational practices indicators combined together could explain 19% of the variance in science scores and parental attitude toward science and educational involvement combined accounted for more than 18% of the variance. Analysis indicates that no significant difference is attributable to parental involvement and educational level. This finding is important because it indicates that, in Saudi Arabia, results are not consistent with research in Western or other Asian contexts.

Geophysical data integration, stochastic simulation and significance analysis of groundwater responses using ANOVA in the Chicot Aquifer system, Louisiana, USA

USGS Publications Warehouse

Rahman, A.; Tsai, F.T.-C.; White, C.D.; Carlson, D.A.; Willson, C.S.

2008-01-01

Data integration is challenging where there are different levels of support between primary and secondary data that need to be correlated in various ways. A geostatistical method is described, which integrates the hydraulic conductivity (K) measurements and electrical resistivity data to better estimate the K distribution in the Upper Chicot Aquifer of southwestern Louisiana, USA. The K measurements were obtained from pumping tests and represent the primary (hard) data. Borehole electrical resistivity data from electrical logs were regarded as the secondary (soft) data, and were used to infer K values through Archie's law and the Kozeny-Carman equation. A pseudo cross-semivariogram was developed to cope with the resistivity data non-collocation. Uncertainties in the auto-semivariograms and pseudo cross-semivariogram were quantified. The groundwater flow model responses by the regionalized and coregionalized models of K were compared using analysis of variance (ANOVA). The results indicate that non-collocated secondary data may improve estimates of K and affect groundwater flow responses of practical interest, including specific capacity and drawdown. ?? Springer-Verlag 2007.

Profilometric analysis of two composite resins' surface repolished after tooth brush abrasion with three polishing systems.

PubMed

Uppal, Mudit; Ganesh, Arathi; Balagopal, Suresh; Kaur, Gurleen

2013-07-01

To evaluate the effect of three polishing protocols that could be implemented at recall on the surface roughness of two direct esthetic restorative materials. Specimens (n = 40) measuring 8 mm (length) × 5 mm (width) × 4 mm (height) were fabricated in an acrylic mold using two light-cured resin-based materials (microfilled composite and microhybrid composite). After photopolymerization, all specimens were finished and polished with one of three polishing protocols (Enhance, One Gloss, and Sof-Lex polishing systems). The average surface roughness of each treated specimen was determined using 3D optical profilometer. Next all specimens were brushed 60,000 times with nylon bristles at 7200 rpm using crosshead brushing device with equal parts of toothpaste and water used as abrasive medium. The surface roughness of each specimen was measured after brushing followed by repolishing with one of three polishing protocols, and then, the final surface roughness values were determined. The data were analyzed using one-way and two-factor analysis of variance (ANOVA) and Tukey's honestly significant difference (HSD). Significant difference (P < 0.05) in surface roughness was observed. Simulated brushing following initial polishing procedure significantly roughened the surface of restorative material (P < 0.05). Polishing protocols can be used to restore a smooth surface on esthetic restorative materials following simulated tooth brushing.

The Changes of Tear Status after Conventional and Wavefront-Guided IntraLASIK

PubMed Central

Foo, Say Kiang; Kaur, Sharanjeet; Abd Manan, Faudziah; Low, Aloysius Joseph

2011-01-01

Background: IntraLASIK is a LASIK surgery that involved IntraLase femtosecond laser for the corneal flap creating. The objective of this research was to investigate and compare the changes in tear status at 1 and 3 months after undergoing conventional IntraLASIK with Bausch & Lomb PlanoScan (PS) algorithm, Bausch & Lomb Zyoptix Tissue Saving (ZTS) algorithm, and wavefront-guided (WG) IntraLASIK with VISX CustomVue. Methods: Tear status of 36 patients who were divided into 3 groups depending on the type of IntraLASIK they underwent (PS, n = 13; ZTS, n = 9; WG, n = 14) was evaluated. Tear status was determined by classifying the category of the thickness of pre-corneal tear lipid layer, non-invasive tear break-up time, and tear meniscus height. Repeated measures analysis of variance (ANOVA) and one way ANOVA were used for the statistical analyses. Results: The category of the thickness of tear lipid layer, non-invasive tear break up time and tear meniscus height were neither significantly changed after IntraLASIK for all groups nor showed significant difference among groups at 1 and 3 months post-IntraLASIK (P > 0.05). Blinking rate and palpebral aperture also had no significant changed after IntraLASIK. Conclusion: Both conventional (PS and ZTS) and WG IntraLASIK did not affect tear status up to 3 months post-IntraLASIK. WG IntraLASIK did not show superiority in preserving tear status 1 and 3 months post-surgery compared with conventional IntraLASIK. PMID:22135584

The impact of environmental and demographic factors on nursing job satisfaction.

PubMed

Rahnavard, Farnaz; Sadati, Ahmad Kalateh; Hemmati, Sorror; Ebrahimzade, Najmeh; Sarikhani, Yaser; Heydari, Seyed Taghi; Lankarani, Kamran Bagheri

2018-04-01

This study aims to evaluate all aspects of job satisfaction in registered nurses working in different hospitals in Shiraz, Iran. This cross-sectional study was performed during February to August 2015 in Shiraz, Iran. It comprised of 371 registered nurses working in government and private hospitals using multi-stage cluster sampling. Job satisfaction was evaluated using 5 items of the Job Descriptive Index (JDI) consisting of 63 questions developed by Smith, Kendall, and Hulin (1969). Statistical tests including independent sample t test and one-way analysis of variance (ANOVA) were used in order to identify the relation between job satisfaction, and demographic features and work environment. Data were analyzed by SPSS version 15.0, using descriptive statistics, independent-samples t-test, and ANOVA. Our findings showed no relationship between demographic variables and job satisfaction. However, a significant association was observed between environmental aspects such as work rotation (fixed versus rotating) nurse's status (staff vs. supervisors), type of hospitals (governmental vs. private) and work (p<0.01), promotion (p<0.02) and pay (p<0.01) items respectively; however, type of hospital was deemed exempt regarding promotion. Also regarding the number of shifts per week, nurses with more than eight shifts present a lower mean score of satisfaction about pay significantly (p=0.03). The results concerning younger nurses have different types of satisfaction based on several environmental factors. Nurses' policy makers must pay more attention to nurses' satisfaction and focus on reducing the various inequalities.

Asphyxia in the Newborn: Evaluating the Accuracy of ICD Coding, Clinical Diagnosis and Reimbursement: Observational Study at a Swiss Tertiary Care Center on Routinely Collected Health Data from 2012-2015

PubMed Central

Rimle, Carole; Zwahlen, Marcel; Triep, Karen; Raio, Luigi; Nelle, Mathias

2017-01-01

Background The ICD-10 categories of the diagnosis “perinatal asphyxia” are defined by clinical signs and a 1-minute Apgar score value. However, the modern conception is more complex and considers metabolic values related to the clinical state. A lack of consistency between the former clinical and the latter encoded diagnosis poses questions over the validity of the data. Our aim was to establish a refined classification which is able to distinctly separate cases according to clinical criteria and financial resource consumption. The hypothesis of the study is that outdated ICD-10 definitions result in differences between the encoded diagnosis asphyxia and the medical diagnosis referring to the clinical context. Methods Routinely collected health data (encoding and financial data) of the University Hospital of Bern were used. The study population was chosen by selected ICD codes, the encoded and the clinical diagnosis were analyzed and each case was reevaluated. The new method categorizes the diagnoses of perinatal asphyxia into the following groups: mild, moderate and severe asphyxia, metabolic acidosis and normal clinical findings. The differences of total costs per case were determined by using one-way analysis of variance. Results The study population included 622 cases (P20 “intrauterine hypoxia” 399, P21 “birth asphyxia” 233). By applying the new method, the diagnosis asphyxia could be ruled out with a high probability in 47% of cases and the variance of case related costs (one-way ANOVA: F (5, 616) = 55.84, p < 0.001, multiple R-squared = 0.312, p < 0.001) could be best explained. The classification of the severity of asphyxia could clearly be linked to the complexity of cases. Conclusion The refined coding method provides clearly defined diagnoses groups and has the strongest effect on the distribution of costs. It improves the diagnosis accuracy of perinatal asphyxia concerning clinical practice, research and reimbursement. PMID:28118380

SU-F-J-180: A Reference Data Set for Testing Two Dimension Registration Algorithms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dankwa, A; Castillo, E; Guerrero, T

Purpose: To create and characterize a reference data set for testing image registration algorithms that transform portal image (PI) to digitally reconstructed radiograph (DRR). Methods: Anterior-posterior (AP) and Lateral (LAT) projection and DRR image pairs from nine cases representing four different anatomical sites (head and neck, thoracic, abdominal, and pelvis) were selected for this study. Five experts will perform manual registration by placing landmarks points (LMPs) on the DRR and finding their corresponding points on the PI using computer assisted manual point selection tool (CAMPST), a custom-made MATLAB software tool developed in house. The landmark selection process will be repeatedmore » on both the PI and the DRR in order to characterize inter- and -intra observer variations associated with the point selection process. Inter and an intra observer variation in LMPs was done using Bland-Altman (B&A) analysis and one-way analysis of variance. We set our limit such that the absolute value of the mean difference between the readings should not exceed 3mm. Later on in this project we will test different two dimension (2D) image registration algorithms and quantify the uncertainty associated with their registration. Results: Using one-way analysis of variance (ANOVA) there was no variations within the readers. When Bland-Altman analysis was used the variation within the readers was acceptable. The variation was higher in the PI compared to the DRR.ConclusionThe variation seen for the PI is because although the PI has a much better spatial resolution the poor resolution on the DRR makes it difficult to locate the actual corresponding anatomical feature on the PI. We hope this becomes more evident when all the readers complete the point selection. The reason for quantifying inter- and -intra observer variation tells us to what degree of accuracy a manual registration can be done. Research supported by William Beaumont Hospital Research Start Up Fund.« less

Heuristics for Understanding the Concepts of Interaction, Polynomial Trend, and the General Linear Model.

ERIC Educational Resources Information Center

Thompson, Bruce

The relationship between analysis of variance (ANOVA) methods and their analogs (analysis of covariance and multiple analyses of variance and covariance--collectively referred to as OVA methods) and the more general analytic case is explored. A small heuristic data set is used, with a hypothetical sample of 20 subjects, randomly assigned to five…

Technical note: Application of the Box-Cox data transformation to animal science experiments.

PubMed

Peltier, M R; Wilcox, C J; Sharp, D C

1998-03-01

In the use of ANOVA for hypothesis testing in animal science experiments, the assumption of homogeneity of errors often is violated because of scale effects and the nature of the measurements. We demonstrate a method for transforming data so that the assumptions of ANOVA are met (or violated to a lesser degree) and apply it in analysis of data from a physiology experiment. Our study examined whether melatonin implantation would affect progesterone secretion in cycling pony mares. Overall treatment variances were greater in the melatonin-treated group, and several common transformation procedures failed. Application of the Box-Cox transformation algorithm reduced the heterogeneity of error and permitted the assumption of equal variance to be met.

Psychometrics of a brief measure of emotional self-efficacy among adolescents from the United States.

PubMed

Valois, Robert F; Zullig, Keith J

2013-10-01

Preliminary data were collected to evaluate the psychometric properties of an emotional self-efficacy (ESE) measure in a sample of 3836 public high school adolescents who completed the Centers for Disease Control and Prevention (CDC) Youth Risk Behavior Survey in South Carolina. Principal axis factor analysis was followed by a 4-way between-groups analysis of variance (ANOVA) testing for differences in total score means on selected demographic estimates and their interactions. Relationships between total score and selected risk behaviors were examined through a series of 1-way ANOVA procedures and subsequent Tukey Honest Significant Difference (HSD) tests. Factor analysis results suggested that a 1-factor model best explained factor structure of the scale items (factor loadings .64 to .71, eigenvalue = 3.24, h(2)  = .46). Girls reported a significantly higher mean total ESE rating than boys; White students reported a significantly higher mean total ESE rating than Black students. Statistically significant lower mean total ESE ratings were also noted for those who reported physical fighting, lifetime alcohol use, and sexual intercourse. This 7-item scale is a reliable measure and could aid school health researchers and mental health practitioners in psychosocial screening and as an outcome of social and emotional learning as a brief measure of adolescent ESE. © 2013, American School Health Association.

A Vignette (User's Guide) for “An R Package for Statistical ...

EPA Pesticide Factsheets

StatCharrms is a graphical user front-end for ease of use in analyzing data generated from OCSPP 890.2200, Medaka Extended One Generation Reproduction Test (MEOGRT) and OCSPP 890.2300, Larval Amphibian Gonad Development Assay (LAGDA). The analyses StatCharrms is capable of performing are: Rao-Scott adjusted Cochran-Armitage test for trend By Slices (RSCABS), a Standard Cochran-Armitage test for trend By Slices (SCABS), mixed effects Cox proportional model, Jonckheere-Terpstra step down trend test, Dunn test, one way ANOVA, weighted ANOVA, mixed effects ANOVA, repeated measures ANOVA, and Dunnett test. This document provides a User’s Manual (termed a Vignette by the Comprehensive R Archive Network (CRAN)) for the previously created R-code tool called StatCharrms (Statistical analysis of Chemistry, Histopathology, and Reproduction endpoints using Repeated measures and Multi-generation Studies). The StatCharrms R-code has been publically available directly from EPA staff since the approval of OCSPP 890.2200 and 890.2300, and now is available publically available at the CRAN.

Analysis of Statistical Methods Currently used in Toxicology Journals

PubMed Central

Na, Jihye; Yang, Hyeri

2014-01-01

Statistical methods are frequently used in toxicology, yet it is not clear whether the methods employed by the studies are used consistently and conducted based on sound statistical grounds. The purpose of this paper is to describe statistical methods used in top toxicology journals. More specifically, we sampled 30 papers published in 2014 from Toxicology and Applied Pharmacology, Archives of Toxicology, and Toxicological Science and described methodologies used to provide descriptive and inferential statistics. One hundred thirteen endpoints were observed in those 30 papers, and most studies had sample size less than 10, with the median and the mode being 6 and 3 & 6, respectively. Mean (105/113, 93%) was dominantly used to measure central tendency, and standard error of the mean (64/113, 57%) and standard deviation (39/113, 34%) were used to measure dispersion, while few studies provide justifications regarding why the methods being selected. Inferential statistics were frequently conducted (93/113, 82%), with one-way ANOVA being most popular (52/93, 56%), yet few studies conducted either normality or equal variance test. These results suggest that more consistent and appropriate use of statistical method is necessary which may enhance the role of toxicology in public health. PMID:25343012

Analysis of Statistical Methods Currently used in Toxicology Journals.

PubMed

Na, Jihye; Yang, Hyeri; Bae, SeungJin; Lim, Kyung-Min

2014-09-01

Statistical methods are frequently used in toxicology, yet it is not clear whether the methods employed by the studies are used consistently and conducted based on sound statistical grounds. The purpose of this paper is to describe statistical methods used in top toxicology journals. More specifically, we sampled 30 papers published in 2014 from Toxicology and Applied Pharmacology, Archives of Toxicology, and Toxicological Science and described methodologies used to provide descriptive and inferential statistics. One hundred thirteen endpoints were observed in those 30 papers, and most studies had sample size less than 10, with the median and the mode being 6 and 3 & 6, respectively. Mean (105/113, 93%) was dominantly used to measure central tendency, and standard error of the mean (64/113, 57%) and standard deviation (39/113, 34%) were used to measure dispersion, while few studies provide justifications regarding why the methods being selected. Inferential statistics were frequently conducted (93/113, 82%), with one-way ANOVA being most popular (52/93, 56%), yet few studies conducted either normality or equal variance test. These results suggest that more consistent and appropriate use of statistical method is necessary which may enhance the role of toxicology in public health.

Bond strength of stainless steel orthodontic brackets bonded to prefabricated acrylic teeth.

PubMed

Wan Abdul Razak, Wan Salbiah; Sherriff, Martyn; Bister, Dirk; Seehra, Jadbinder

2017-06-01

The purpose of this in-vitro study was to evaluate the force to debond stainless steel orthodontic brackets bonded to acrylic teeth using different combinations of adhesive and surface treatments. One hundred prefabricated upper lateral incisor acrylic teeth were divided into 4 equal groups: Transbond XT® adhesive only (Group 1, control), Transbond XT® adhesive with sandblasting (Group 2), Transbond XT® adhesive with abrasion / + methyl methacrylate (MMA) (Group 3) and Triad® Gel only (Group 4). The force in Newtons (N) to debond the brackets was measured. One-way analysis of variance (ANOVA) and pairwise multi-comparison of means (Šidak's adjustment) were undertaken. The highest force to debond was recorded for Group 2 (275.7 N; SD 89.0) followed by Group 3 (241.9 N; SD 76.0), Group 1 (142.7 N; SD 36.7) and Group 4 (67.9 N; SD 21.1). Significant differences in bond strength measurements between the experimental groups were detected. Mean force values for the groups revealed no significant differences between Group 2 and Group 3 (p>0.05). Both sandblasting and surface abrasion/+ application of methyl methacrylate (MMA) in combination with Transbond XT® adhesive are recommended for bonding stainless orthodontic brackets to acrylic teeth.

Different Spectrophotometric Methods for Simultaneous Determination of Trelagliptin and Its Acid Degradation Product

PubMed Central

Hassan, Mostafa A.; Zaghary, Wafaa A.

2018-01-01

New spectrophotometric and chemometric methods were carried out for the simultaneous assay of trelagliptin (TRG) and its acid degradation product (TAD) and applied successfully as a stability indicating assay to recently approved Zafatek® tablets. TAD was monitored using TLC to ensure complete degradation. Furthermore, HPLC was used to confirm dealing with one major acid degradation product. The proposed methods were developed by manipulating zero-order, first-derivative, and ratio spectra of TRG and TAD using simultaneous equation, first-derivative, and mean-centering methods, respectively. Using Spectra Manager II and Minitab v.14 software, the absorbance at 274 nm–260.4 nm, amplitudes at 260.4 nm–274.0 nm, and mean-centered values at 287.6 nm–257.2 nm were measured against methanol as a blank for TRG and TAD, respectively. Linearity and the other validation parameters were acceptable at concentration ranges of 5–50 μg/mL and 2.5–25 μg/mL for TRG and TAD, respectively. Using one-way analysis of variance (ANOVA), the optimized methods were compared and proved to be accurate for the simultaneous assay of TRG and TAD. PMID:29629213

Different Spectrophotometric Methods for Simultaneous Determination of Trelagliptin and Its Acid Degradation Product.

PubMed

Mowaka, Shereen; Ayoub, Bassam M; Hassan, Mostafa A; Zaghary, Wafaa A

2018-01-01

New spectrophotometric and chemometric methods were carried out for the simultaneous assay of trelagliptin (TRG) and its acid degradation product (TAD) and applied successfully as a stability indicating assay to recently approved Zafatek® tablets. TAD was monitored using TLC to ensure complete degradation. Furthermore, HPLC was used to confirm dealing with one major acid degradation product. The proposed methods were developed by manipulating zero-order, first-derivative, and ratio spectra of TRG and TAD using simultaneous equation, first-derivative, and mean-centering methods, respectively. Using Spectra Manager II and Minitab v.14 software, the absorbance at 274 nm-260.4 nm, amplitudes at 260.4 nm-274.0 nm, and mean-centered values at 287.6 nm-257.2 nm were measured against methanol as a blank for TRG and TAD, respectively. Linearity and the other validation parameters were acceptable at concentration ranges of 5-50  μ g/mL and 2.5-25  μ g/mL for TRG and TAD, respectively. Using one-way analysis of variance (ANOVA), the optimized methods were compared and proved to be accurate for the simultaneous assay of TRG and TAD.

Effect of different surface treatments on the push-out bond strength of fiber post to root canal dentin.

PubMed

Demiryürek, Ebru Ozsezer; Külünk, Safak; Saraç, Duygu; Yüksel, Gözde; Bulucu, Bilinç

2009-08-01

The purpose of this study was to evaluate the effects of different surface treatments on the bond strength of a fiber post to dentin. Sixty extracted human maxillary incisor teeth were manually shaped with K-files using the step-back technique. ISO size 45 files were used as master apical files. Post spaces were prepared and then the root canals were subjected to one of the following 5 surface treatments: irrigation with 5% sodium hypochlorite (NaOCl); treatment with ethanol, ethyl acetate, and acetone-based cleansing agent (Sikko Tim); irrigation with 17% EDTA; etching with 37% orthophosphoric acid for 15 seconds; and etching with 10% citric acid for 15 seconds. Fiber posts were luted using self-etching/self-priming dual polymerized resin cement. From the coronal part of each root, 3 slides of 0.6-mm thickness were obtained. A push-out bond strength test was performed by a universal testing machine at a crosshead speed of 0.5 mm/min. Dentin surfaces were examined under scanning electron microscopy (SEM) after different surface treatments. Data were analyzed with a one-way analysis of variance (ANOVA) and Tukey HSD test. ANOVA revealed that canal surface treatment affected the bond strength (P < .001). The highest bond strength was obtained in the Sikko Tim group. The results also showed that surface treatment methods increased the bond strength to dentin when compared with the control group. Sikko Tim group was the more effective surface treatment agent compared with EDTA, orthophosphoric acid, citric acid, and control groups; however, it could not remove the smear layer and sealer remnants effectively on radicular dentin surfaces. Removal of the smear layer and opening of dentinal tubules are not recommended when a self-etching/self-priming adhesive system is used.

The relationship between corn particle size and thermoregulation of laying hens in an equatorial semi-arid environment.

PubMed

de Souza, João Batista Freire; de Morais Oliveira, Vanessa Raquel; de Arruda, Alex Martins Varela; de Melo Silva, Aurora; de Macedo Costa, Leonardo Lelis

2015-01-01

Heat stress is one of the main factors affecting egg production. One way to improve egg production is physical processing of the feed ingredients, allowing for better utilization of nutrients. In this study, the relationship between the corn particle size, measured as the geometric mean diameter (GMD), and thermoregulation was evaluated by determining the effect of the GMD on performance, egg quality, and physiological responses. Feed intake, eggshell quality (weight and thickness), rectal temperature (T R), respiratory rate (R R), and surface temperature (T S) were recorded in sixty 20-week-old naked neck laying hens that were fed corn of different particle sizes. Ambient temperature (T A) was also recorded during the trial. The GMD of corn particles was determined using a screens granulometer, resulting in sizes of 605, 1,030, and 2,280 μm. The analysis of variance (ANOVA) of a completely randomized design showed a significant effect (P < 0.05) of GMD on feed intake, shell weight, and shell thickness. The ANOVA performed by the least squares method showed a highly significant effect (P < 0.01) of GMD on T R and R R. T A, categorized into three classes (24.0-26, 26.1-28.9, and 29.0-31.0 °C), had a significant effect (P < 0.01) on T R and T S. The interaction between the GMD of corn particles and the T A classes was not statistically significant. Coarser corn particles cause an increase in the rectal temperature of naked neck hens, and these birds increase their respiratory rate to dissipate excess metabolic heat. This increase in the respiratory rate causes a decrease in the eggshell quality.

Audit diabetes-dependent quality of life questionnaire: usefulness in diabetes self-management education in the Slovak population.

PubMed

Holmanová, Elena; Ziaková, Katarína

2009-05-01

This paper reports a study to test validity and internal consistency of the audit diabetes-dependent quality of life questionnaire in the Slovak population and to evaluate its usefulness in the context of education of people with diabetes. The individualised instruments designed to measure individuals' perceptions of the impact of diabetes on their quality of life may be helpful to identify individuals' preferences, motivational deficits in diabetes management and to tailor individual treatment strategies. Survey. After linguistic validation, the structure of the questionnaire was tested using factor analysis on 104 patients who were recruited from the National Institute of Endocrinology and Diabetology in Lubochna. Internal consistency was evaluated by computing Cronbach's alpha. Clinical variables related to the quality of life were analysed using one-way ANOVA, multifactor ANOVA, Pearson's and Spearman's rank correlation coefficients. A one-dimensional scale structure was supported and internal consistency was high (alpha = 0.93). Variance in impact of diabetes on quality of life was explained by age, presence of late complications and type of insulin regimen. The audit diabetes-dependent quality of life is culturally appropriate, valid and reliable in the sample of Slovak patients attending the educational programme. Our results agreed with previous European and Asian studies supporting its usefulness in the context of diabetes self-management education. Individualised diabetes-specific quality of life measures allow better understanding of patients' treatment preferences and, consequently, more effective prioritizing and targeting of appropriate educational interventions. This instrument may be useful in routine clinical practice and as an outcome measure for international clinical research trials evaluating effectiveness of educational programmes.

The relationship between corn particle size and thermoregulation of laying hens in an equatorial semi-arid environment

NASA Astrophysics Data System (ADS)

de Souza, João Batista Freire; de Morais Oliveira, Vanessa Raquel; de Arruda, Alex Martins Varela; de Melo Silva, Aurora; de Macedo Costa, Leonardo Lelis

2015-01-01

Heat stress is one of the main factors affecting egg production. One way to improve egg production is physical processing of the feed ingredients, allowing for better utilization of nutrients. In this study, the relationship between the corn particle size, measured as the geometric mean diameter (GMD), and thermoregulation was evaluated by determining the effect of the GMD on performance, egg quality, and physiological responses. Feed intake, eggshell quality (weight and thickness), rectal temperature ( T R), respiratory rate ( R R), and surface temperature ( T S) were recorded in sixty 20-week-old naked neck laying hens that were fed corn of different particle sizes. Ambient temperature ( T A) was also recorded during the trial. The GMD of corn particles was determined using a screens granulometer, resulting in sizes of 605, 1,030, and 2,280 μm. The analysis of variance (ANOVA) of a completely randomized design showed a significant effect ( P < 0.05) of GMD on feed intake, shell weight, and shell thickness. The ANOVA performed by the least squares method showed a highly significant effect ( P < 0.01) of GMD on T R and R R. T A, categorized into three classes (24.0-26, 26.1-28.9, and 29.0-31.0 °C), had a significant effect ( P < 0.01) on T R and T S. The interaction between the GMD of corn particles and the T A classes was not statistically significant. Coarser corn particles cause an increase in the rectal temperature of naked neck hens, and these birds increase their respiratory rate to dissipate excess metabolic heat. This increase in the respiratory rate causes a decrease in the eggshell quality.

Over-the-counter pharmaceuticals: exploratory research of consumer preference toward solid oral dosage forms.

PubMed

Reisenwitz, T H; Wimbish, G J

1996-01-01

The capsule dosage form in nonprescription pharmaceuticals persists as being one of the most vulnerable to product tampering. This study examines consumer preference toward three solid oral dosage forms (capsules, caplets, and tablets) in nonprescription products. Thirteen independent variables representing dosage form attributes are measured on semantic differential scales. The data are analyzed using analysis of variance (ANOVA) and factor analysis. Implications for the pharmaceutical marketer are noted. Future directions for research are also outlined.

An Investigation of Collaborative Leadership

DTIC Science & Technology

2013-01-01

businesses . The second will use an analysis of variance (ANOVA) to statistically compare the variance among organizations. Research regarding collaborative...horizontal column of the “T,” a leader is networking across the larger business model to understand how their organization’s core skills can be used in...the exchange of information or services among individuals, groups, or institutions in order to cultivate productive business relationships

Blood lead levels and risk factors in pregnant women from Durango, Mexico.

PubMed

La-Llave-León, Osmel; Estrada-Martínez, Sergio; Manuel Salas-Pacheco, José; Peña-Elósegui, Rocío; Duarte-Sustaita, Jaime; Candelas Rangel, Jorge-Luís; García Vargas, Gonzalo

2011-01-01

In this cross-sectional study the authors determined blood lead levels (BLLs) and some risk factors for lead exposure in pregnant women. Two hundred ninety-nine pregnant women receiving medical attention by the Secretary of Health, State of Durango, Mexico, participated in this study between 2007 and 2008. BLLs were evaluated with graphite furnace atomic absorption spectrometry. The authors used Student t test, 1-way analysis of variance (ANOVA), and linear regression as statistical treatments. BLLs ranged from 0.36 to 23.6 μg/dL (mean = 2.79 μg/dL, standard deviation = 2.14). Multivariate analysis showed that the main predictors of BLLs were working in a place where lead is used, using lead glazed pottery, and eating soil.

Genetic variance of tolerance and the toxicant threshold model.

PubMed

Tanaka, Yoshinari; Mano, Hiroyuki; Tatsuta, Haruki

2012-04-01

A statistical genetics method is presented for estimating the genetic variance (heritability) of tolerance to pollutants on the basis of a standard acute toxicity test conducted on several isofemale lines of cladoceran species. To analyze the genetic variance of tolerance in the case when the response is measured as a few discrete states (quantal endpoints), the authors attempted to apply the threshold character model in quantitative genetics to the threshold model separately developed in ecotoxicology. The integrated threshold model (toxicant threshold model) assumes that the response of a particular individual occurs at a threshold toxicant concentration and that the individual tolerance characterized by the individual's threshold value is determined by genetic and environmental factors. As a case study, the heritability of tolerance to p-nonylphenol in the cladoceran species Daphnia galeata was estimated by using the maximum likelihood method and nested analysis of variance (ANOVA). Broad-sense heritability was estimated to be 0.199 ± 0.112 by the maximum likelihood method and 0.184 ± 0.089 by ANOVA; both results implied that the species examined had the potential to acquire tolerance to this substance by evolutionary change. Copyright © 2012 SETAC.

The influence of teachers' conceptions on their students' learning: children's understanding of sheet music.

PubMed

López-Íñiguez, Guadalupe; Pozo, Juan Ignacio

2014-06-01

Despite increasing interest in teachers' and students' conceptions of learning and teaching, and how they influence their practice, there are few studies testing the influence of teachers' conceptions on their students' learning. This study tests how teaching conception (TC; with a distinction between direct and constructive) influences students' representations regarding sheet music. Sixty students (8-12 years old) from music conservatories: 30 of them took lessons with teachers with a constructive TC and another 30 with teachers shown to have a direct TC. Children were given a musical comprehension task in which they were asked to select and rank the contents they needed to learn. These contents had different levels of processing and complexity: symbolic, analytical, and referential. Three factorial ANOVAs, two-one-way ANOVAs, and four 2 × 3 repeated-measures ANOVAs were used to analyse the effects of and the interaction between the independent variables TC and class, both for/on total cards selected, their ranking, and each sub-category (the three processing levels). ANOVAs on the selection and ranking of these contents showed that teachers' conceptions seem to mediate significantly in the way the students understand the music. Students from constructive teachers have more complex and deep understanding of music. They select more elements for learning scores than those from traditional teachers. Teaching conception also influences the way in which children rank those elements. No difference exists between the way 8- and 12-year-olds learn scores. Children's understanding of the scores is more complex than assumed in other studies. © 2013 The British Psychological Society.

A preliminary investigation of trunk and wrist kinematics when using drivers with different shaft properties.

PubMed

Joyce, Christopher; Burnett, Angus; Cochrane, Jodie; Reyes, Alvaro

2016-01-01

It is unknown whether skilled golfers will modify their kinematics when using drivers of different shaft properties. This study aimed to firstly determine if golf swing kinematics and swing parameters and related launch conditions differed when using modified drivers, then secondly, determine which kinematics were associated with clubhead speed. Twenty high level amateur male golfers (M ± SD: handicap = 1.9 ± 1.9 score) had their three-dimensional (3D) trunk and wrist kinematics collected for two driver trials. Swing parameters and related launch conditions were collected using a launch monitor. A one-way repeated measures ANOVA revealed significant (p ≤ 0.003) between driver differences; specifically, faster trunk axial rotation velocity and an early wrist release for the low kick point driver. Launch angle was shown to be 2° lower for the high kick point driver. Regression models for both drivers explained a significant amount of variance (60-67%) in clubhead speed. Wrist kinematics were most associated with clubhead speed, indicating the importance of the wrists in producing clubhead speed regardless of driver shaft properties.

The Persian developmental sentence scoring as a clinical measure of morphosyntax in children.

PubMed

Jalilevand, Nahid; Kamali, Mohammad; Modarresi, Yahya; Kazemi, Yalda

2016-01-01

Background: Developmental Sentence Scoring (DSS) was developed as a numerical measurement and a clinical method based on the morphosyntactic acquisition in the English language. The aim of this study was to develop a new numerical tool similar to DSS to assess the morphosyntactic abilities in Persian-speaking children. Methods: In this cross-sectional and comparative study, the language samples of 115 typically developing Persian-speaking children aged 30 - 65 months were audio recorded during the free play and picture description sessions. The Persian Developmental Sentence Score (PDSS) and the Mean Length of Utterance (MLU) were calculated. Pearson correlation and one - way Analysis of variance (ANOVA) were used for data analysis. Results: The correlation between PDSS and MLU in morphemes (convergent validity) was significant with a correlation coefficient of 0.97 (p< 0.001). The value Cronbach's Alpha (α= 0.79) in the grammatical categories and the split-half coefficient (0.86) indicated acceptable internal consistency reliability. Conclusion: The PDSS could be used as a reliable numerical measurement to estimate the syntactic development in Persian-speaking children.

Effects of perceived parental attitudes on children's views of smoking.

PubMed

Ozturk, Candan; Kahraman, Seniha; Bektas, Murat

2013-01-01

The aim of this study was to examine the effects of perceived parental attitudes on children's discernment of cigarettes. The study sample consisted of 250 children attending grades 6, 7 and 8. Data were collected via a socio-demographic survey questionnaire, the Parental Attitude Scale (PAS) and the Decisional Balance Scale (DBS). Data analysis covered percentages, medians, one-way analysis of variance (ANOVA) and post-hoc tests using a statistical package. There were 250 participants; 117 were male, 133 were female. The mean age was 13.1 ± 0.98 for the females and 13.3 ± 0.88 for the males. A statistically significant difference was found in the children's mean scores for 'pros' subscale on the Decisional Balance Scale (DBS) according to perceived parental attitudes (F=3.172, p=0.025). There were no statistically significant differences in the DBS 'cons' subscale scores by perceived parental attitudes. It was determined that while perceived parental attitudes affect children's views on advantages of smoking, they have no effect on children's views on its disadvantages.

Urban and rural comparison of vitamin D status in Pakistani pregnant women and neonates.

PubMed

Anwar, S; Iqbal, M P; Azam, I; Habib, A; Bhutta, S; Soofi, S B; Bhutta, Z A

2016-01-01

We undertook a cross-sectional study in rural Jehlum and urban Karachi to evaluate the prevalence of vitamin D deficiency in Pakistani pregnant women and neonates and to assess any association of serum 25(OH) vitamin D [25(OH)D] concentration with vitamin D binding protein (Gc) genotypes. Altogether, 390 women and 266 neonates were recruited from urban and rural sites, respectively. Serum 25(OH)D was measured by an immunoassay, while Gc genotypes were identified using polymerase chain reaction followed by restriction fragment length polymorphism or PCR-RFLP. One-way analysis of variance or ANOVA and linear regression were used for statistical analysis. In urban Karachi, 99.5% of women and 97.3% of neonates were vitamin D deficient (< 50 nmol/L), while 89% of women and 82% of neonates were deficient in rural Jehlum. Gc genotypes were not associated with serum 25(OH)D concentrations in both women and their neonates. We conclude that vitamin D deficiency is highly prevalent in Pakistani women and their neonates, and Gc genotypes are not associated with serum 25(OH)D concentrations.

The Persian developmental sentence scoring as a clinical measure of morphosyntax in children

PubMed Central

Jalilevand, Nahid; Kamali, Mohammad; Modarresi, Yahya; Kazemi, Yalda

2016-01-01

Background: Developmental Sentence Scoring (DSS) was developed as a numerical measurement and a clinical method based on the morphosyntactic acquisition in the English language. The aim of this study was to develop a new numerical tool similar to DSS to assess the morphosyntactic abilities in Persian-speaking children. Methods: In this cross-sectional and comparative study, the language samples of 115 typically developing Persian-speaking children aged 30 - 65 months were audio recorded during the free play and picture description sessions. The Persian Developmental Sentence Score (PDSS) and the Mean Length of Utterance (MLU) were calculated. Pearson correlation and one – way Analysis of variance (ANOVA) were used for data analysis. Results: The correlation between PDSS and MLU in morphemes (convergent validity) was significant with a correlation coefficient of 0.97 (p< 0.001). The value Cronbach's Alpha (α= 0.79) in the grammatical categories and the split-half coefficient (0.86) indicated acceptable internal consistency reliability. Conclusion: The PDSS could be used as a reliable numerical measurement to estimate the syntactic development in Persian-speaking children. PMID:28210600

In vitro wear of new indirect resin composites.

PubMed

Jain, V; Platt, J A; Moore, B K; Borges, G A

2009-01-01

This in vitro study evaluated the toothbrush abrasion wear, three-body Alabama wear and two-body pin-on-disc wear of four commercial indirect resin composites. Enamel shades of Radica (R), Sculpture Plus (S), Belleglass-NG (B) and Gradia Indirect (G) were used. For measuring wear due to toothbrush abrasion, six specimens of each group were fabricated, then brushed in a toothbrush abrasion machine for 20,000 cycles. Material loss was determined by weighing and conversion to volume loss. Three-body wear was measured on six samples for each group using an Alabama-type wear testing machine for 400,000 cycles. Wear depth was measured with a contact profilometer. For two-body wear, five disc specimens were prepared and tested in a two-body wear-testing machine against hydroxypatite sliders for 25,000 cycles. Data were analyzed with one-way analysis of variance (ANOVA) and Tukey test (alpha=0.05). Wear was the highest in Sculpture Plus by all three methods tested and the lowest wear was observed in Belleglass-NG. No statistical difference in wear was noted from Radica.

Statiscal analysis of an earthquake-induced landslide distribution - The 1989 Loma Prieta, California event

USGS Publications Warehouse

Keefer, D.K.

2000-01-01

The 1989 Loma Prieta, California earthquake (moment magnitude, M=6.9) generated landslides throughout an area of about 15,000 km2 in central California. Most of these landslides occurred in an area of about 2000 km2 in the mountainous terrain around the epicenter, where they were mapped during field investigations immediately following the earthquake. The distribution of these landslides is investigated statistically, using regression and one-way analysisof variance (ANOVA) techniques to determine how the occurrence of landslides correlates with distance from the earthquake source, slope steepness, and rock type. The landslide concentration (defined as the number of landslide sources per unit area) has a strong inverse correlation with distance from the earthquake source and a strong positive correlation with slope steepness. The landslide concentration differs substantially among the various geologic units in the area. The differences correlate to some degree with differences in lithology and degree of induration, but this correlation is less clear, suggesting a more complex relationship between landslide occurrence and rock properties. ?? 2000 Elsevier Science B.V. All rights reserved.

Classification of pulmonary pathology from breath sounds using the wavelet packet transform and an extreme learning machine.

PubMed

Palaniappan, Rajkumar; Sundaraj, Kenneth; Sundaraj, Sebastian; Huliraj, N; Revadi, S S

2017-06-08

Auscultation is a medical procedure used for the initial diagnosis and assessment of lung and heart diseases. From this perspective, we propose assessing the performance of the extreme learning machine (ELM) classifiers for the diagnosis of pulmonary pathology using breath sounds. Energy and entropy features were extracted from the breath sound using the wavelet packet transform. The statistical significance of the extracted features was evaluated by one-way analysis of variance (ANOVA). The extracted features were inputted into the ELM classifier. The maximum classification accuracies obtained for the conventional validation (CV) of the energy and entropy features were 97.36% and 98.37%, respectively, whereas the accuracies obtained for the cross validation (CRV) of the energy and entropy features were 96.80% and 97.91%, respectively. In addition, maximum classification accuracies of 98.25% and 99.25% were obtained for the CV and CRV of the ensemble features, respectively. The results indicate that the classification accuracy obtained with the ensemble features was higher than those obtained with the energy and entropy features.

Two-way ANOVA Problems with Simple Numbers.

ERIC Educational Resources Information Center

Read, K. L. Q.; Shihab, L. H.

1998-01-01

Describes how to construct simple numerical examples in two-way ANOVAs, specifically randomized blocks, balanced two-way layouts, and Latin squares. Indicates that working through simple numerical problems is helpful to students meeting a technique for the first time and should be followed by computer-based analysis of larger, real datasets when…

Assessment of Ions released from Three Types of Orthodontic Brackets immersed in Different Mouthwashes: An in vitro Study.

PubMed

Nahidh, Mohammed; Garma, Noor Mh; Jasim, Esraa S

2018-01-01

Herbs are used widely in medicine. The purpose of the present study was to assess the ion release from gold-plated orthodontic bracket compared with other stainless steel brackets, and based on the findings of the study, the orthodontists can choose the most biocompatible brackets and mouthwashes useful in the clinical practice. A total of 150 orthodontic brackets from Orthotechnology™ Company, USA (50 stainless steel one-piece brackets, 50 stainless steel two-piece brackets, and 50 gold brackets) were immersed in four mouthwashes in addition to distilled water. Ten of each type of brackets in every media were immersed under 37°C for 45 days. Ions released in these mouthwashes were measured, and comparisons among different bracket types and among various mouthwashes were done by one-way analysis of variance (ANOVA) and then with Games-Howell tests. Increased amounts of ions released in herbal mouth-washes were recorded in gold and two-piece brackets in comparison with one-piece stainless steel brackets. Herbal mouthwashes must be used with caution as they showed an increased amount of ions released in comparison with chlorhexidine. One-piece stainless steel bracket system is the most compatible bracket type, as they released the least amount of ions. One-piece stainless steel brackets are better than two-piece brackets in terms of ions released.

Bond durability of adhesives containing modified-monomer with/without-fluoride after aging in artificial saliva and under intrapulpal pressure simulation.

PubMed

El-Deeb, H A; Al Sherbiney, H H; Mobarak, E H

2013-01-01

To evaluate the dentin bond strength durability of adhesives containing modified-monomer with/without-fluoride after storage in artificial saliva and under intrapulpal pressure simulation (IPPS). The occlusal enamel of 48 freshly extracted teeth was trimmed to expose midcoronal dentin. Roots were sectioned to expose the pulp chamber and to connect the specimens to the pulpal-pressure assembly. Specimens were assigned into four groups (n=12) according to adhesive system utilized: a two-step etch-and-rinse adhesive system (SB, Adper Single Bond 2, 3M ESPE), a two-step self-etch adhesive system (CSE, Clearfil SE Bond, Kuraray Medical Inc), and two single-step self-etch adhesives with the same modified monomer (bis-acrylamide)-one with fluoride (AOF, AdheSE One F, Ivoclar-Vivadent) and the other without (AO, AdheSE One, Ivoclar-Vivadent). Bonding was carried out while the specimens were subjected to 15-mm Hg IPPS. Resin composite (Valux Plus, 3M ESPE) buildups were made. After curing, specimens were aged in artificial saliva and under 20-mm Hg IPPS at 37°C in a specially constructed incubator either for 24 hours or six months prior to testing. Bonded specimens (n=6/group) were sectioned into sticks (n=24/group) with a cross section of 0.9 ± 0.01 mm(2) and subjected to microtensile bond strength (μTBS) testing using a universal testing machine. Data were statistically analyzed using two-way analysis of variance (ANOVA) with repeated measures, one-way ANOVA tests, and a t-test (p<0.05). Failure modes were determined using a scanning electron microscope. The μTBS values of SB and CSE fell significantly after six-month storage in artificial saliva and under IPPS, yet these values remained significantly higher than those for the other two adhesives with modified monomers. There was no significant difference in the bond strength values between fluoride-containing and fluoride-free self-etch adhesive systems (AOF and AO) after 24 hours or six months. Modes of failure were mainly adhesive and mixed. Based on the results of this study, 1) Fluoride addition did not affect dentin bond durability; and 2) despite the fact that the single-step adhesive system with modified monomer showed stability, bond strengths associated with these systems remained lower than those of multistep adhesive systems.

Effect of chlorhexidine pretreatment on bond strength durability of caries-affected dentin over 2-year aging in artificial saliva and under simulated intrapulpal pressure.

PubMed

Mobarak, E H

2011-01-01

To evaluate the influence of 2% and 5% chlorhexidine (CHX) pretreatment on bond durability of a self-etching adhesive to normal (ND) and caries-affected (AD) dentin after 2-years of aging in artificial saliva and under simulated intrapulpal pressure (IPP). One hundred twenty freshly extracted carious teeth were ground to expose ND and AD. Specimens were distributed into three equal groups (n=40) according to whether the dentin substrates were pretreated with 2% or 5% CHX or with water (control). Clearfil SE Bond (Kuraray) was applied to both substrates and composite cylinders (0.9 mm diameter and 0.7 mm height) were formed. Pretreatment and bonding were done while the specimens were subjected to 15 mm Hg IPP. After curing, specimens were aged in artificial saliva at 37°C and under IPP at 20 mm Hg until being tested after 24 hours or 2 years (n=20/group). Microshear bond strength was evaluated. Failure modes were determined using a scanning electron microscope (SEM) at 400× magnification. Data were statistically analyzed using three-way analysis of variance (ANOVA); one-way ANOVA tests, and t-test (p<0.05). Additional specimens (n=5/group) were prepared to evaluate interfacial silver precipitation. For the 24-hour groups, there were no significant differences among the ND groups and AD groups. For ND aged specimens, the 5% CHX group had the highest value followed by the 2% CHX and control groups, although the difference was statistically insignificant. For AD aged specimens, the 5% CHX group revealed statistically higher bond values compared to the 2% CHX and control groups. Fracture modes were predominately adhesive and mixed. Different interfacial silver depositions were recorded. Two percent or 5% CHX pretreatment has no adverse effect on the 24-hour bonding to ND and AD. Five percent CHX was able to diminish the loss in bonding to AD after 2years of aging in artificial saliva and under simulated IPP.

Cellular injury evidenced by impedance technology and infrared microspectroscopy

NASA Astrophysics Data System (ADS)

le Roux, K.; Prinsloo, L. C.; Meyer, D.

2015-03-01

Fourier Transform Infrared (FTIR) spectroscopy is finding increasing biological application, for example in the analysis of diseased tissues and cells, cell cycle studies and investigating the mechanisms of action of anticancer drugs. Cancer treatment studies routinely define the types of cell-drug responses as either total cell destruction by the drug (all cells die), moderate damage (cell deterioration where some cells survive) or reversible cell cycle arrest (cytostasis). In this study the loss of viability and related chemical stress experienced by cells treated with the medicinal plant, Plectranthus ciliatus, was investigated using real time cell electronic sensing (RT-CES) technology and FTIR microspectroscopy. The use of plants as medicines is well established and ethnobotany has proven that crude extracts can serve as treatments against various ailments. The aim of this study was to determine whether FTIR microspectroscopy would successfully distinguish between different types of cellular injury induced by a potentially anticancerous plant extract. Cervical adenocarcinoma (HeLa) cells were treated with a crude extract of Pciliatus and cells monitored using RT-CES to characterize the type of cellular responses induced. Cell populations were then investigated using FTIR microspectroscopy and statistically analysed using One-way Analysis of Variance (ANOVA) and Principal Component Analysis (PCA). The plant extract and a cancer drug control (actinomycin D) induced concentration dependent cellular responses ranging from nontoxic, cytostatic or cytotoxic. Thirteen spectral peaks (915 cm-1, 933 cm-1, 989 cm-1, 1192 cm-1, 1369 cm-1, 1437 cm-1, 1450 cm-1, 1546 cm-1, 1634 cm-1, 1679 cm-1 1772 cm-1, 2874 cm-1 and 2962 cm-1) associated with cytotoxicity were significantly (p value < 0.05, one way ANOVA, Tukey test, Bonferroni) altered, while two of the bands were also indicative of early stress related responses. In PCA, poor separation between nontoxic and cytostatic responses was evident while clear separation was linked to cytotoxicity. RT-CES detected morphological changes as indicators of cell injury and could distinguish between viable, cytostatic and cytotoxic responses. FTIR microspectroscopy confirmed that cytostatic cells were viable and could still recover while also describing early cellular stress related responses on a molecular level.

Evaluation of Mean Glandular Dose and Modulation Transfer Function for Different Tube Potentials and Target-Filter Combinations in Computed Radiography Mammography

PubMed Central

Abdul Aziz,, Siti Aishah; Mohd Saparudin, Abdul Khaliq; Harun, Ahmad Zaky

2013-01-01

Background: Different target-filter combinations in computed radiography have different impacts on the dose and image quality in digital radiography. This study aims to evaluate the mean glandular dose (MGD) and modulation transfer function (MTF) of various target-filter combinations by investigating the signal intensities of X-ray beams. Methods: General Electric (GE) Senographe DMR Plus mammography unit was used for MGD and MTF evaluation. The measured MGD was compared with the dose reference level (DRL), whereas the MTF was evaluated using ImageJ 1.46o software. A modified Mammography Accreditation Phantom RMI 156 was exposed using different target-filter combinations of molybdenum-molybdenum (Mo-Mo), molybdenum-rhodium (Mo-Rh) and rhodium-rhodium (Rh-Rh) at two different tube voltages, 26 kV and 32 kV with 50 mAs. Results: In the MGD evaluations, all target-filters gave an MGD value of < 1.5 mGy. The one-way ANOVA test showed a highly significant interaction between the MGD and the kilovoltage and target-filter material used (26 kV: F (2,12) = 49,234, P = 0.001;32 kV: F (2,12) = 89,972, P = 0.001). A Tukey post-hoc test revealed that the MGD for 26 kV and 32 kV was highly affected by the target-filter combinations. The test of homogeneity of variances indicates that the MGD varies significantly for 26 kV and 32 kV images (0.045 and 0.030 (P < 0.05), respectively). However, the one-way ANOVA for the MTF shows that no significant difference exists between the target-filter combinations used with 26 kV and 32 kV images either in parallel or perpendicular to the chest wall side F (2,189) = 0.26, P > 0.05). Conclusion: Higher tube voltage and atomic number target-filter yield higher MGD values. However, the MTF is independent of the X-ray energy and the type of target-filter combinations used. PMID:23966821

Detection of the airway obstruction stage in asthma using impulse oscillometry system.

PubMed

Qi, Guang-Sheng; Zhou, Zhi-Cai; Gu, Wen-Chao; Xi, Feng; Wu, Hao; Yang, Wen-Lan; Liu, Jin-Ming

2013-02-01

Although spirometry is the most common method for evaluating the airway obstruction stage in asthma patients, it is difficult to perform in some patients. The aim of this study was to evaluate whether impulse oscillometry, an easy-to-perform technique, can detect asthmatic airway obstruction stage. A total of 80 subjects, including healthy volunteers and patients with asthma, were enrolled in this study. The asthma patients were classified into three groups according to American Thoracic Society (ATS)/European Respiratory Society (ERS)-2005: the mild group (forced expiratory volume in 1 second (FEV(1)) ≥ 70% predicted (Pred), n = 20), the moderate group (50% Pred ≤ FEV(1) <70% Pred, n = 20), and the severe group (FEV(1) < 50% Pred, n = 20). Spirometry and impulse oscillometry (IOS) parameters were obtained from every subject. Correlation analysis was used to compare spirometry measurements and IOS parameters. One-way analysis of variance (ANOVA) was performed to compare IOS parameters among different groups. The potential of using all individual IOS parameters to detect the different stages of asthmatic airway obstruction was evaluated by the receiver operating characteristic (ROC) curve analysis. The correlation analysis showed that IOS parameters, such as respiratory resistance at 5 Hz (R(5)), respiratory resistance at 10 Hz (R(10)), respiratory resistance at 20 Hz (R(20)), difference in resistance between 5 Hz and 20 Hz (R(5-20)), impedance at 5 Hz (Z(5)), resonant frequency (Fres), and area of reactance (AX) were negatively correlated with FEV(1) and peak expiratory flow (PEF), while reactance at 5 Hz (X(5)) was positively correlated with FEV(1) and PEF. The increase in R(5), R(10), R(20), Z(5), R(5-20), Fres, (-X(5)), and AX parameters corresponded significantly with an increase in the airway obstruction stage, as determined by one-way ANOVA . ROC curve analysis revealed that all the IOS parameters studied, except for Fres, were capable of classifying asthmatic airway obstruction. R(5), R(5-20), and Z(5) were the most accurate parameters. IOS provides an accurate, reliable, and patient-friendly technique for classifying asthmatic airway obstruction.

Antimicrobial Susceptibility of Vibrio vulnificus and Vibrio parahaemolyticus Recovered from Recreational and Commercial Areas of Chesapeake Bay and Maryland Coastal Bays

PubMed Central

Shaw, Kristi S.; Rosenberg Goldstein, Rachel E.; He, Xin; Jacobs, John M.; Crump, Byron C.; Sapkota, Amy R.

2014-01-01

Vibrio vulnificus and V. parahaemolyticus in the estuarine-marine environment are of human health significance and may be increasing in pathogenicity and abundance. Vibrio illness originating from dermal contact with Vibrio laden waters or through ingestion of seafood originating from such waters can cause deleterious health effects, particularly if the strains involved are resistant to clinically important antibiotics. The purpose of this study was to evaluate antimicrobial susceptibility among these pathogens. Surface-water samples were collected from three sites of recreational and commercial importance from July to September 2009. Samples were plated onto species-specific media and resulting V. vulnificus and V. parahaemolyticus strains were confirmed using polymerase chain reaction assays and tested for antimicrobial susceptibility using the Sensititre® microbroth dilution system. Descriptive statistics, Friedman two-way Analysis of Variance (ANOVA) and Kruskal-Wallis one-way ANOVA were used to analyze the data. Vibrio vulnificus (n = 120) and V. parahaemolyticus (n = 77) were isolated from all sampling sites. Most isolates were susceptible to antibiotics recommended for treating Vibrio infections, although the majority of isolates expressed intermediate resistance to chloramphenicol (78% of V. vulnificus, 96% of V. parahaemolyticus). Vibrio parahaemolyticus also demonstrated resistance to penicillin (68%). Sampling location or month did not significantly impact V. parahaemolyticus resistance patterns, but V. vulnificus isolates from St. Martin's River had lower overall intermediate resistance than that of the other two sampling sites during the month of July (p = 0.0166). Antibiotics recommended to treat adult Vibrio infections were effective in suppressing bacterial growth, while some antibiotics recommended for pediatric treatment were not effective against some of the recovered isolates. To our knowledge, these are the first antimicrobial susceptibility data of V. vulnificus and V. parahaemolyticus recovered from the Chesapeake Bay. These data can serve as a baseline against which future studies can be compared to evaluate whether susceptibilities change over time. PMID:24586914

In vitro evaluation of frictional forces of two ceramic orthodontic brackets versus a stainless steel bracket in combination with two types of archwires

PubMed Central

Arash, Valiollah; Rabiee, Mahmoud; Rakhshan, Vahid; Khorasani, Sara; Sobouti, Farhad

2015-01-01

Purpose: The aim of this study was to compare frictional forces between monocrystalline alumina (MA), polycrystalline alumina (PA), and stainless steel (SS) brackets with two SS wires: Rectangular and round. Materials and Methods: In this in vitro study, 60 0.022 brackets [20 PA (0° torque, Forestadent, Germany) and 20 MA (0° torque, Ormco, California, USA)] brackets plus 20 SS brackets (0° torque, Foretadent, Germany) and 60 SS archwires (30 rectangular 0.019 ×0.025 archwires and 30 round 0.018 archwires, Ortho Technology, USA) were used in subgroups of 10 from the combination of all brackets and all archwires. A universal testing machine (Instron, Model STM 250, Germany) was used to investigate the static frictional resistance. The angulation between the bracket and wire was 0°, and the wires were pulled through the slots at a crosshead speed of 10 mm/min. Two-way and one-way analyses of variance (ANOVA) and Tukey tests were used to analyze the data. Results: Mean (SD) static frictional force for each group was as follows: MA + round: 3.47 (0.38); MA + rectangular: 4.05 (0.47); PA + round: 4.14 (0.37); PA + rectangular: 4.45 (0.65); SS + round: 3.28 (0.22); and SS + rectangular: 4.22 (0.61). Significant effects of bracket types (P = 0.001) and archwire types (P = 0.000) on the friction force were detected using ANOVA. Tukey test indicated significant differences between PA brackets with both SS and MA brackets (P < 0.05), but not between SS and MA brackets. The two archwires as well had significantly different effects (Tukey P = 0.000). Conclusions: Based on the present in-vitro study, the PA brackets might create higher frictional forces compared to both SS and MA brackets. The rectangular 0.019 ×0.025 archwire might create greater forces than round 0.018 archwire. PMID:26020037

In vitro evaluation of frictional forces of two ceramic orthodontic brackets versus a stainless steel bracket in combination with two types of archwires.

PubMed

Arash, Valiollah; Rabiee, Mahmoud; Rakhshan, Vahid; Khorasani, Sara; Sobouti, Farhad

2015-01-01

The aim of this study was to compare frictional forces between monocrystalline alumina (MA), polycrystalline alumina (PA), and stainless steel (SS) brackets with two SS wires: Rectangular and round. In this in vitro study, 60 0.022 brackets [20 PA (0° torque, Forestadent, Germany) and 20 MA (0° torque, Ormco, California, USA)] brackets plus 20 SS brackets (0° torque, Foretadent, Germany) and 60 SS archwires (30 rectangular 0.019 ×0.025 archwires and 30 round 0.018 archwires, Ortho Technology, USA) were used in subgroups of 10 from the combination of all brackets and all archwires. A universal testing machine (Instron, Model STM 250, Germany) was used to investigate the static frictional resistance. The angulation between the bracket and wire was 0°, and the wires were pulled through the slots at a crosshead speed of 10 mm/min. Two-way and one-way analyses of variance (ANOVA) and Tukey tests were used to analyze the data. Mean (SD) static frictional force for each group was as follows: MA + round: 3.47 (0.38); MA + rectangular: 4.05 (0.47); PA + round: 4.14 (0.37); PA + rectangular: 4.45 (0.65); SS + round: 3.28 (0.22); and SS + rectangular: 4.22 (0.61). Significant effects of bracket types (P = 0.001) and archwire types (P = 0.000) on the friction force were detected using ANOVA. Tukey test indicated significant differences between PA brackets with both SS and MA brackets (P < 0.05), but not between SS and MA brackets. The two archwires as well had significantly different effects (Tukey P = 0.000). Based on the present in-vitro study, the PA brackets might create higher frictional forces compared to both SS and MA brackets. The rectangular 0.019 ×0.025 archwire might create greater forces than round 0.018 archwire.

Assessment of respondent acceptability of preference measures: discriminatory power of graphic positioning scale versus traditional scaling measures.

PubMed

Franic, Duska M; Pathak, Dev S

2003-01-01

The objective of this study was to compare discriminatory power of two different measures-graphic positioning scale (GPS) versus traditional scale (TS)-in assessing respondent acceptability of three preference measures: visual analog scale (VAS), standard gamble (SG), and willingness to pay (WTP). Two face-to-face interviews were conducted at least 1 week apart in a convenience sample of women aged 22 to 50 years with no history of breast cancer or cancer requiring chemotherapy. Study participation required completion of two surveys: one evaluating health preferences for an acute condition (chemotherapy-induced nausea and vomiting) and one evaluating a chronic condition (breast cancer). Data were collected from March 2000 to June 2000 at Ohio State University. Respondents were randomized to either GPS or TS surveys. Data analysis was a two-step process. First, a four-way multivariate repeated-measures analysis of variance (MANOVA) was conducted to assess respondent acceptability of three-preference metrics-VAS, SG, and WTP-in health-care decision making. Each of the four dependent variables, difficulty, clarity, reasonableness, and comfort in use in decision making, was measured on 9-point Likert scale. Second, a mixed design univariate analysis of variance (ANOVA) was performed for each dependent variable to optimize MANOVA analysis. Univariate ANOVAs, 2 x (2 x 3), were composed of three independent variables: assessment (GPS/TS), condition (acute and chronic), and preferences (VAS, SG, WTP). Of 126 respondents, 119 were usable and complete. MANOVA results showed (P <.05) for two main effects, condition (F4,114 = 6.375) and preferences (F8,110 = 9.290), and two significant interactions, condition x assessment (F4,114 = 3.421) and condition x preferences (F8,110 = 2.087). GPS has higher discriminatory power than TS in assessing respondent attitudes toward health preference measures. Results showed that respondents had more difficulty and less comfort when making decisions for chronic than for acute conditions. Results also show that respondents regard WTP as a more reasonable decision-making tool when assessing acute interventions in preference to SG and vice versa for chronic conditions. Of VAS, SG, and WTP methods, VAS was perceived as being the easiest to understand. These results can be explained by direct versus indirect comparisons made with GPS and TS methods, respectively.

Student Evaluation of Online Pharmaceutical Compounding Videos

PubMed Central

Park, Hanna L.

2016-01-01

Objective. To describe pharmacy students’ views on the effectiveness of an expansion of the compounding laboratory website at the UNC Eshelman School of Pharmacy. Methods. Originally, there were 39 videos and three animations available. In 2011, an additional 59 videos and two animations were added. Concurrently, all of the interactive questions were updated to fully integrate with the expanded video library. Students were surveyed about the expanded video library regarding accessibility, functionality, and usefulness, and how using the library impacted their learning of compounding. Surveys were analyzed with descriptive statistics. Means and SDs were calculated for the rating scale questions; independent t tests and Wilcoxon nonparametric tests were used to find differences between professional classes and campuses. Analytical results were evaluated with a one-way analysis of variance (ANOVA), z test, and a homogeneity of variance (Levene’s) test. Results. The response rate to the survey was 85%. Compounding videos were used by 386/391 students. Thirty-four percent of students used the videos an average of 30 minutes or less per week; 56% used the videos 1–2 hours per week. Approximately 80% of students were satisfied with the functionality and accessibility of the videos. All students, regardless of professional year or campus affiliation, put their confidence/competence at about 70% of the rating scale. Conclusions. As no standardized compounding curriculum was found in US schools of pharmacy and students reported being satisfied with the website, it could be an accessible, functional, and useful resource for pharmaceutical compounding in schools of pharmacy. PMID:27073283

Student Evaluation of Online Pharmaceutical Compounding Videos.

PubMed

Park, Hanna L; Shrewsbury, Robert P

2016-03-25

Objective. To describe pharmacy students' views on the effectiveness of an expansion of the compounding laboratory website at the UNC Eshelman School of Pharmacy. Methods. Originally, there were 39 videos and three animations available. In 2011, an additional 59 videos and two animations were added. Concurrently, all of the interactive questions were updated to fully integrate with the expanded video library. Students were surveyed about the expanded video library regarding accessibility, functionality, and usefulness, and how using the library impacted their learning of compounding. Surveys were analyzed with descriptive statistics. Means and SDs were calculated for the rating scale questions; independent t tests and Wilcoxon nonparametric tests were used to find differences between professional classes and campuses. Analytical results were evaluated with a one-way analysis of variance (ANOVA), z test, and a homogeneity of variance (Levene's) test. Results. The response rate to the survey was 85%. Compounding videos were used by 386/391 students. Thirty-four percent of students used the videos an average of 30 minutes or less per week; 56% used the videos 1-2 hours per week. Approximately 80% of students were satisfied with the functionality and accessibility of the videos. All students, regardless of professional year or campus affiliation, put their confidence/competence at about 70% of the rating scale. Conclusions. As no standardized compounding curriculum was found in US schools of pharmacy and students reported being satisfied with the website, it could be an accessible, functional, and useful resource for pharmaceutical compounding in schools of pharmacy.

Untargeted Identification of Wood Type-Specific Markers in Particulate Matter from Wood Combustion.

PubMed

Weggler, Benedikt A; Ly-Verdu, Saray; Jennerwein, Maximilian; Sippula, Olli; Reda, Ahmed A; Orasche, Jürgen; Gröger, Thomas; Jokiniemi, Jorma; Zimmermann, Ralf

2016-09-20

Residential wood combustion emissions are one of the major global sources of particulate and gaseous organic pollutants. However, the detailed chemical compositions of these emissions are poorly characterized due to their highly complex molecular compositions, nonideal combustion conditions, and sample preparation steps. In this study, the particulate organic emissions from a masonry heater using three types of wood logs, namely, beech, birch, and spruce, were chemically characterized using thermal desorption in situ derivatization coupled to a GCxGC-ToF/MS system. Untargeted data analyses were performed using the comprehensive measurements. Univariate and multivariate chemometric tools, such as analysis of variance (ANOVA), principal component analysis (PCA), and ANOVA simultaneous component analysis (ASCA), were used to reduce the data to highly significant and wood type-specific features. This study reveals substances not previously considered in the literature as meaningful markers for differentiation among wood types.

Binary similarity measures for fingerprint analysis of qualitative metabolomic profiles.

PubMed

Rácz, Anita; Andrić, Filip; Bajusz, Dávid; Héberger, Károly

2018-01-01

Contemporary metabolomic fingerprinting is based on multiple spectrometric and chromatographic signals, used either alone or combined with structural and chemical information of metabolic markers at the qualitative and semiquantitative level. However, signal shifting, convolution, and matrix effects may compromise metabolomic patterns. Recent increase in the use of qualitative metabolomic data, described by the presence (1) or absence (0) of particular metabolites, demonstrates great potential in the field of metabolomic profiling and fingerprint analysis. The aim of this study is a comprehensive evaluation of binary similarity measures for the elucidation of patterns among samples of different botanical origin and various metabolomic profiles. Nine qualitative metabolomic data sets covering a wide range of natural products and metabolomic profiles were applied to assess 44 binary similarity measures for the fingerprinting of plant extracts and natural products. The measures were analyzed by the novel sum of ranking differences method (SRD), searching for the most promising candidates. Baroni-Urbani-Buser (BUB) and Hawkins-Dotson (HD) similarity coefficients were selected as the best measures by SRD and analysis of variance (ANOVA), while Dice (Di1), Yule, Russel-Rao, and Consonni-Todeschini 3 ranked the worst. ANOVA revealed that concordantly and intermediately symmetric similarity coefficients are better candidates for metabolomic fingerprinting than the asymmetric and correlation based ones. The fingerprint analysis based on the BUB and HD coefficients and qualitative metabolomic data performed equally well as the quantitative metabolomic profile analysis. Fingerprint analysis based on the qualitative metabolomic profiles and binary similarity measures proved to be a reliable way in finding the same/similar patterns in metabolomic data as that extracted from quantitative data.

The overuse of the implant motor: effect on the output torque in overloading condition.

PubMed

Lee, Du-Hyeong; Cho, Sung-Am; Lee, Cheong-Hee; Lee, Kyu-Bok

2015-06-01

The overloading of the motor affects its performance. The output torque of the implant motor under overloading condition has not been reported. The purpose of this study was to determine the reliability and the tendency of the output torque when an implant motor is consecutively used. Three implant motors were evaluated: SurgicXT/X-SG20L (NSK), INTRAsurg300/CL3-09 (KaVo), and XIP10/CRB26LX (Saeshin). The output torque was measured using an electronic torque gauge fixed with jigs. For the 40 and 50 Ncm torque settings, 300 measurements were taken at 30 rpm. Repeated measures of analysis of variance (ANOVA) and one-way ANOVA were used to compare the torque values within each group and between the groups. As repeating measures, the output torque values decreased gradually compared with the baseline. In within-group analysis, the different torque value from the first measurement appeared earliest in NSK motor, followed in order by Saeshin and KaVo motors. NSK motor showed a different torque decrease between 40 and 50 Ncm settings (p < .05). Intergroup analysis revealed Saeshin motor to have the least deviation from the baseline, followed by KaVo motor. NSK motor had the most inconsistent torque at the 6, 8, 9, and 10 repeat counts (p < .05). The actual torque decreases when the surgical motor is continuously used. The NSK motor showed more significant decreases in torque than KaVo and Saeshin motors in overloading condition. © 2014 Wiley Periodicals, Inc.

Brushing force of manual and sonic toothbrushes affects dental hard tissue abrasion.

PubMed

Wiegand, Annette; Burkhard, John Patrik Matthias; Eggmann, Florin; Attin, Thomas

2013-04-01

This study aimed to determine the brushing forces applied during in vivo toothbrushing with manual and sonic toothbrushes and to analyse the effect of these brushing forces on abrasion of sound and eroded enamel and dentin in vitro. Brushing forces of a manual and two sonic toothbrushes (low and high frequency mode) were measured in 27 adults before and after instruction of the respective brushing technique and statistically analysed by repeated measures analysis of variance (ANOVA). In the in vitro experiment, sound and eroded enamel and dentin specimens (each subgroup n = 12) were brushed in an automatic brushing machine with the respective brushing forces using a fluoridated toothpaste slurry. Abrasion was determined by profilometry and statistically analysed by one-way ANOVA. Average brushing force of the manual toothbrush (1.6 ± 0.3 N) was significantly higher than for the sonic toothbrushes (0.9 ± 0.2 N), which were not significantly different from each other. Brushing force prior and after instruction of the brushing technique was not significantly different. The manual toothbrush caused highest abrasion of sound and eroded dentin, but lowest on sound enamel. No significant differences were detected on eroded enamel. Brushing forces of manual and sonic toothbrushes are different and affect their abrasive capacity. Patients with severe tooth wear and exposed and/or eroded dentin surfaces should use sonic toothbrushes to reduce abrasion, while patients without tooth wear or with erosive lesions confining only to enamel do not benefit from sonic toothbrushes with regard to abrasion.

Efficacy of nicarbazin (Ovistop®) in the containment and reduction of the populations of feral pigeons (Columba livia var. domestica) in the city of Genoa, Italy: a retrospective evaluation.

PubMed

Albonetti, Paolo; Marletta, Antonio; Repetto, Ivano; Sasso, Emanuela Assunta

2015-01-01

This study describes the results of a retrospective evaluation (8 years: 2005-2012) of the efficacy of the anti-fertility drug, Ovistop® nicarbazin (800 ppm) added to corn kernels used to feed non-migratory feral pigeon colonies, Columba livia var. domestica, in the city of Genoa, Italy. The observation interested 4 non-migratory feral pigeon colonies located into well‑defined areas of the city of Genoa, Italy. Three of these colonies were treated for 12 months, with 10 g of drug (Ovistop®) provided per bird per day for 5 days each week; the other colony was treated in the same way but with a placebo (control station). Each colony and the relative area where the colony was located were both monitored with the same daily examination. Statistical analysis techniques were applied to the findings recorded - both descriptive (indices of central and dispersion trends) and comparative (one-way variance analysis). In the colonies treated with the drug, following an initial increase in the population ('magnet effect'), a reduction was observed over the following 4 years (-35% >x> -45%) and a further decrease (-65% >x> -70%) was observed over the subsequent 4 years (statistically significant one-way ANOVA p<0.01). This phenomenon was recorded across the board in the 3 treated stations, compared to the overall unstable trend observed for the control station. As no external or exceptional anthropic or natural factors were observed, it can be stated that, given the results observed, the drug seemed effective in reducing the treated bird populations.

Feature extraction and selection from volatile compounds for analytical classification of Chinese red wines from different varieties.

PubMed

Zhang, Jian; Li, Li; Gao, Nianfa; Wang, Depei; Gao, Qiang; Jiang, Shengping

2010-03-10

This work was undertaken to evaluate whether it is possible to determine the variety of a Chinese wine on the basis of its volatile compounds, and to investigate if discrimination models could be developed with the experimental wines that could be used for the commercial ones. A headspace solid-phase microextraction gas chromatographic (HS-SPME-GC) procedure was used to determine the volatile compounds and a blind analysis based on Ac/Ais (peak area of volatile compound/peak area of internal standard) was carried out for statistical purposes. One way analysis of variance (ANOVA), principal component analysis (PCA) and stepwise linear discriminant analysis (SLDA) were used to process data and to develop discriminant models. Only 11 peaks enabled to differentiate and classify the experimental wines. SLDA allowed 100% recognition ability for three grape varieties, 100% prediction ability for Cabernet Sauvignon and Cabernet Gernischt wines, but only 92.31% for Merlot wines. A more valid and robust way was to use the PCA scores to do the discriminant analysis. When we performed SLDA this way, 100% recognition ability and 100% prediction ability were obtained. At last, 11 peaks which selected by SLDA from raw analysis set had been identified. When we demonstrated the models using commercial wines, the models showed 100% recognition ability for the wines collected directly from winery and without ageing, but only 65% for the others. Therefore, the varietal factor was currently discredited as a differentiating parameter for commercial wines in China. Nevertheless, this method could be applied as a screening tool and as a complement to other methods for grape base liquors which do not need ageing and blending procedures. 2010 Elsevier B.V. All rights reserved.

Adaptive surrogate modeling by ANOVA and sparse polynomial dimensional decomposition for global sensitivity analysis in fluid simulation

NASA Astrophysics Data System (ADS)

Tang, Kunkun; Congedo, Pietro M.; Abgrall, Rémi

2016-06-01

The Polynomial Dimensional Decomposition (PDD) is employed in this work for the global sensitivity analysis and uncertainty quantification (UQ) of stochastic systems subject to a moderate to large number of input random variables. Due to the intimate connection between the PDD and the Analysis of Variance (ANOVA) approaches, PDD is able to provide a simpler and more direct evaluation of the Sobol' sensitivity indices, when compared to the Polynomial Chaos expansion (PC). Unfortunately, the number of PDD terms grows exponentially with respect to the size of the input random vector, which makes the computational cost of standard methods unaffordable for real engineering applications. In order to address the problem of the curse of dimensionality, this work proposes essentially variance-based adaptive strategies aiming to build a cheap meta-model (i.e. surrogate model) by employing the sparse PDD approach with its coefficients computed by regression. Three levels of adaptivity are carried out in this paper: 1) the truncated dimensionality for ANOVA component functions, 2) the active dimension technique especially for second- and higher-order parameter interactions, and 3) the stepwise regression approach designed to retain only the most influential polynomials in the PDD expansion. During this adaptive procedure featuring stepwise regressions, the surrogate model representation keeps containing few terms, so that the cost to resolve repeatedly the linear systems of the least-squares regression problem is negligible. The size of the finally obtained sparse PDD representation is much smaller than the one of the full expansion, since only significant terms are eventually retained. Consequently, a much smaller number of calls to the deterministic model is required to compute the final PDD coefficients.

Effect of glide path preparation on apical extrusion of debris in root canals instrumented with three single-file systems: An ex vivo comparative study

PubMed Central

Pawar, Ajinkya M.; Pawar, Mansing; Kfir, Anda; Thakur, Bhagyashree; Mutha, Pooja; Banga, Kulwinder Singh

2017-01-01

Aim: The aim of this study was to test the effect of new protocol of glide path preparation by 20/0.04 rotary file on apical extrusion of debris when instrumenting fine curved mesial canals in mandibular molars with Self-adjusting File (SAF) and compare it to a glide path prepared by 20/0.02 hand K-file and rotary OneShape (OS) and reciprocating WaveOne (WO) file instrumentation. Materials and Methods: Sixty mandibular molars with curved mesial roots were selected and randomly divided into three groups (n = 20) for instrumentation. In two groups, glide path was prepared using 20/0.02 K-file for instrumentation by OS (size 25/0.06 taper) and WO (size 25/0.08 taper) files; in the remaining group, 20/0.04 rotary file was used for glide path preparation and instrumented by SAF (1.5 mm). The debris extruded during instrumentation was collected in preweighed Eppendorf tubes and stored in an incubator at 70°C for 5 days. Tubes containing the dry extruded debris were then weighed. One-way analysis of variance (ANOVA) was applied to the weights obtained, followed by Tukey's post hoc test for multiple comparison. Results: The mean debris (g) extruded apically was 0.000651 ± 0.000291, 0.000823 ± 0.000319, and 0.000473 ± 0.000238 for Group 1 (20/0.02 + OS), Group 2 (20/0.02 + WO), and Group 3 (20/0.04 + SAF), respectively. The groups exhibited a significant difference (P < 0.01; ANOVA). Group 3 resulted in least debris extrusion compared to Groups 1 and 2 (P < 0.01; Tukey's post hoc test). Conclusion: Glide path prepared to size 20/0.04 and SAF 1.5 mm instrumentation produce less debris in curved mesial canals of mandibular molars, compared to glide path established by 20/0.02 and instrumentation by OS and WO files. PMID:28855758

Significance of the Pars Interarticularis in the Cortical Bone Trajectory Screw Technique: An In Vivo Insertional Torque Study.

PubMed

Ninomiya, Koshi; Iwatsuki, Koichi; Ohnishi, Yu-Ichiro; Ohkawa, Toshika; Yoshimine, Toshiki

2016-10-01

Retrospective study. Cortical bone trajectory (CBT), a more medial-to-lateral and shorter path than the traditional one for spinal fusion, is thought to be effective for severely degenerated vertebrae because screws are primarily stabilized at the posterior elements. We evaluated the efficacy of this approach through in vivo insertional torque measurement. There has been only one prior in vivo study on CBT insertional torque. Between January 2013 and April 2014, a total of 22 patients underwent posterior lumbar fusion using the CBT technique. The maximum insertional torque, which covers the radial strength needed for insertion, was measured for 113 screws, 8 of which were inserted for L5 spondylolysis. The insertional torque for cases with (n=8) and without (n=31) spondylolysis of L5 were compared using one-way analysis of variance (ANOVA). To evaluate vertebral degeneration, we classified 53 vertebrae without spondylolysis by lumbar radiography using semiquantitative methods; the insertional torque for the 105 screws used was compared on the basis of this classification. Additionally, differences in insertional torque among cases grouped by age, sex, and lumbar level were evaluated for these 105 screws using ANOVA and the Tukey test. The mean insertional torque was significantly lower for patients with spondylolysis than for those without spondylolysis (4.25 vs. 8.24 in-lb). There were no statistical differences in insertional torque according to vertebral grading or level. The only significant difference in insertional torque between age and sex groups was in men <75 years and women ≥75 years (10 vs. 5.5 in-lb). Although CBT should be used with great caution in patient with lysis who are ≥75 years, it is well suited for dealing with severely degenerated vertebrae because the pars interarticularis plays a very important role in the implementation of this technique.

Do online gossipers promote brands?

PubMed

Okazaki, Shintaro; Rubio, Natalia; Campo, Sara

2013-02-01

Online gossip has been recognized as small talk on social networking sites (SNSs) that influences consumer behavior, but little attention has been paid to its role. This study makes three theoretical predictions: (a) propensity to gossip online leads to greater information value, entertainment value, and friendship value; (b) upon exposure to a high-involvement product, online gossipers are more willing to spread such information through electronic word-of-mouth (eWOM) in search of prestige or fame as a knowledge expert; and (c) this tendency will be more pronounced when they are connected with strong ties (rather than weak ties) and belong to a large network (rather than a small network). An experimental survey was conducted with a scenario method. In total, 818 general consumers participated in the survey. A multivariate analysis of variance (ANOVA) provides empirical support for prediction (1). With regard to predictions (2) and (3), a series of three-way and two-way between-subjective ANOVAs were performed. When a high-involvement product is promoted, gossipers, rather than nongossipers, are more willing to participate in eWOM on an SNS. Furthermore, a significant interaction effect indicates that online gossipers' willingness to particiapte in eWOM would be more pronounced if they belonged to a large network rather than a small network. However, when a low-involvement product is promoted, no interaction effect is found between online gossip and network size. In closing, theoretical and managerial implications are discussed, while important limitations are recognized.

Do Online Gossipers Promote Brands?

PubMed Central

Rubio, Natalia; Campo, Sara

2013-01-01

Abstract Online gossip has been recognized as small talk on social networking sites (SNSs) that influences consumer behavior, but little attention has been paid to its role. This study makes three theoretical predictions: (a) propensity to gossip online leads to greater information value, entertainment value, and friendship value; (b) upon exposure to a high-involvement product, online gossipers are more willing to spread such information through electronic word-of-mouth (eWOM) in search of prestige or fame as a knowledge expert; and (c) this tendency will be more pronounced when they are connected with strong ties (rather than weak ties) and belong to a large network (rather than a small network). An experimental survey was conducted with a scenario method. In total, 818 general consumers participated in the survey. A multivariate analysis of variance (ANOVA) provides empirical support for prediction (1). With regard to predictions (2) and (3), a series of three-way and two-way between-subjective ANOVAs were performed. When a high-involvement product is promoted, gossipers, rather than nongossipers, are more willing to participate in eWOM on an SNS. Furthermore, a significant interaction effect indicates that online gossipers' willingness to particiapte in eWOM would be more pronounced if they belonged to a large network rather than a small network. However, when a low-involvement product is promoted, no interaction effect is found between online gossip and network size. In closing, theoretical and managerial implications are discussed, while important limitations are recognized. PMID:23276259

Assessment of the mechanics of a tissue-engineered rat trachea in an image-processing environment.

PubMed

Silva, Thiago Henrique Gomes da; Pazetti, Rogerio; Aoki, Fabio Gava; Cardoso, Paulo Francisco Guerreiro; Valenga, Marcelo Henrique; Deffune, Elenice; Evaristo, Thaiane; Pêgo-Fernandes, Paulo Manuel; Moriya, Henrique Takachi

2014-07-01

Despite the recent success regarding the transplantation of tissue-engineered airways, the mechanical properties of these grafts are not well understood. Mechanical assessment of a tissue-engineered airway graft before implantation may be used in the future as a predictor of function. The aim of this preliminary work was to develop a noninvasive image-processing environment for the assessment of airway mechanics. Decellularized, recellularized and normal tracheas (groups DECEL, RECEL, and CONTROL, respectively) immersed in Krebs-Henseleit solution were ventilated by a small-animal ventilator connected to a Fleisch pneumotachograph and two pressure transducers (differential and gauge). A camera connected to a stereomicroscope captured images of the pulsation of the trachea before instillation of saline solution and after instillation of Krebs-Henseleit solution, followed by instillation with Krebs-Henseleit with methacholine 0.1 M (protocols A, K and KMCh, respectively). The data were post-processed with computer software and statistical comparisons between groups and protocols were performed. There were statistically significant variations in the image measurements of the medial region of the trachea between the groups (two-way analysis of variance [ANOVA], p<0.01) and of the proximal region between the groups and protocols (two-way ANOVA, p<0.01). The technique developed in this study is an innovative method for performing a mechanical assessment of engineered tracheal grafts that will enable evaluation of the viscoelastic properties of neo-tracheas prior to transplantation.

Comparing preseason frontal and sagittal plane plyometric programs on vertical jump height in high-school basketball players.

PubMed

King, Jeffrey A; Cipriani, Daniel J

2010-08-01

The primary purpose of this study was to evaluate whether frontal plane (FP) plyometrics, which are defined as plyometrics dominated with a lateral component, would produce similar increases in vertical jump height (VJH) compared to sagittal plane (SP) Plyometrics. Thirty-two junior varsity and varsity high-school basketball players participated in 6 weeks of plyometric training. Players participated in either FP or SP plyometrics for the entire study. Vertical jump height was measured on 3 occasions: preintervention (baseline), at week 3 of preparatory training, and at week 6 of training. Descriptive statistics were calculated for VJH. A 2-way analysis of variance (ANOVA) with repeated measures was used to test the difference in mean vertical jump scores using FP and SP training modalities. Results showed a significant effect over time for vertical jump (p < 0.001). Moreover, a significant time by protocol interaction was noted (p < 0.032). A 1-way ANOVA demonstrated that only the SP group demonstrated improvements over time, in VJH, p < 0.05. The FP group did not improve statistically. The data from this study suggest that FP plyometric training did not have a significant effect on VJH and significant improvement in VJH was seen in subjects participating in SP plyometrics thus reinforcing the specificity principle of training. However, coaches should implement both types of plyometrics because both training modalities can improve power and quickness among basketball players.

Estimating linear effects in ANOVA designs: the easy way.

PubMed

Pinhas, Michal; Tzelgov, Joseph; Ganor-Stern, Dana

2012-09-01

Research in cognitive science has documented numerous phenomena that are approximated by linear relationships. In the domain of numerical cognition, the use of linear regression for estimating linear effects (e.g., distance and SNARC effects) became common following Fias, Brysbaert, Geypens, and d'Ydewalle's (1996) study on the SNARC effect. While their work has become the model for analyzing linear effects in the field, it requires statistical analysis of individual participants and does not provide measures of the proportions of variability accounted for (cf. Lorch & Myers, 1990). In the present methodological note, using both the distance and SNARC effects as examples, we demonstrate how linear effects can be estimated in a simple way within the framework of repeated measures analysis of variance. This method allows for estimating effect sizes in terms of both slope and proportions of variability accounted for. Finally, we show that our method can easily be extended to estimate linear interaction effects, not just linear effects calculated as main effects.

Tumor Necrosis Factor-induced Decrease of Cochlear Blood Flow Can Be Reversed by Etanercept or JTE-013.

PubMed

Sharaf, Kariem; Ihler, Friedrich; Bertlich, Mattis; Reichel, Christoph A; Berghaus, Alexander; Canis, Martin

2016-08-01

This study aimed to quantify the effects of tumor necrosis factor (TNF) inhibitor Etanercept and sphingosine-1-phosphate receptor 2 antagonist JTE-013 on cochlear blood flow in guinea pigs after TNF-induced decrease. Sudden sensorineural hearing loss is a common cause for disability and reduced quality of life. Good understanding of the pathophysiology and strong evidence-based therapy concepts are still missing. In various inner ear disorders, inflammation and impairment of cochlear blood flow (CBF) have been considered factors in the pathophysiology. A central mediator of inflammation and microcirculation in the cochlea is TNF. S1P acts downstream in one TNF pathway. Cochlea lateral wall vessels were exposed surgically and assessed by intravital microscopy in guinea pigs in vivo. Twenty-eight animals were randomly distributed into four groups of seven each. Exposed vessels were superfused by TNF (5.0 ng/ml) and afterward repeatedly either by Etanercept (1.0 μg/ml), JTE-013 (10 μmol/L), or vehicle (0.9 % NaCl solution or ethanol: phosphate-buffered saline buffer, respectively). After decreasing CBF with TNF (p <0.001, two-way RM ANOVA), both treatments reversed CBF, compared with vehicle (p <0.001, two-way RM ANOVA). The comparison of the vehicle groups showed no difference (p = 0.969, two-way RM ANOVA), while there was also no difference between the treatment groups (p = 0.850, two-way RM ANOVA). Both Etanercept and JTE-013 reverse the decreasing effect of TNF on cochlear blood flow and, therefore, TNF and the S1P-signalling pathway might be targets for treatment of microcirculation-related hearing loss.

The protective effect of hydrogen sulfide (H2S) on traumatic brain injury (TBI) induced memory deficits in rats.

PubMed

Karimi, Seyed Asaad; Hosseinmardi, Narges; Janahmadi, Mahyar; Sayyah, Mohammad; Hajisoltani, Razieh

2017-09-01

Traumatic brain injury (TBI), as an expanding public health epidemic, is a common cause of death among youth. TBI is associated with cognitive deficits and memory impairment. Hydrogen sulfide (H 2 S), a novel gaseous mediator, has been recognized as an important neuromodulator and neuroprotective agent in the central nervous system. In the present study the potential neuroprotective role of sodium hydrosulfide (NaHS), an H 2 S donor on TBI induced memory deficit in a rat model of controlled cortical impact (CCI) injury was investigated. CCI model was used to induce TBI. Male rats were randomly assigned into the following groups: control, sham, sham treated with NaHS, TBI, and TBI treated with NaHS (3 and 5mg/kg). NaHS was injected intraperitoneally 5min before TBI induction. Learning and memory were assessed using Morris water maze (MWM) on days 8-12 following injury. CCI resulted in MWM deficits. Injured animals showed a slower rate of acquisition with respect to the sham-operated animals [F (1, 24)=13.97, P<0.01, two-way ANOVA]. NaHS improved spatial memory impairment of injured rats. Treatment with NaHS (5 mg/kg) decreased the escape latency [F (1, 24)=7.559, P<0.05, two-way ANOVA] and traveled distance [F (1, 12)=6.398, P<0.05, Two way ANOVA)]. In probe test, injured animals spent less time in target zone (P<0.05, unpaired t-test) and NaHS did not have any effect on this parameter (p>0.05, one way ANOVA). These findings suggest that NaHS has a neuroprotective effect on TBI-induced memory impairment in rats. Copyright © 2017 Elsevier Inc. All rights reserved.

Using Plates and Trays with MyPlate Images to Encourage Healthy Food Choices: A Pilot Study at Military Dining Facilities

DTIC Science & Technology

dairy consumption . Future research should investigate the effectiveness of the MyPlate intervention for improving diet quality and nutrition knowledge in larger military dining facilities at different locations....introduced the new food labeling system. Dietary intake of facility patrons was measured during 12 lunch meals using the food photography method. Repeated...measures ANOVA, one-way ANOVA, paired t-test, and McNemars test were used. Results: Dairy consumption increased from baseline to intervention (0.50.4

Guided discovery learning in geometry learning

NASA Astrophysics Data System (ADS)

Khasanah, V. N.; Usodo, B.; Subanti, S.

2018-03-01

Geometry is a part of the mathematics that must be learned in school. The purpose of this research was to determine the effect of Guided Discovery Learning (GDL) toward geometry learning achievement. This research had conducted at junior high school in Sukoharjo on academic years 2016/2017. Data collection was done based on student’s work test and documentation. Hypothesis testing used two ways analysis of variance (ANOVA) with unequal cells. The results of this research that GDL gave positive effect towards mathematics learning achievement. GDL gave better mathematics learning achievement than direct learning. There was no difference of mathematics learning achievement between male and female. There was no an interaction between sex differences and learning models toward student’s mathematics learning achievement. GDL can be used to improve students’ mathematics learning achievement in geometry.

Improved Test Planning and Analysis Through the Use of Advanced Statistical Methods

NASA Technical Reports Server (NTRS)

Green, Lawrence L.; Maxwell, Katherine A.; Glass, David E.; Vaughn, Wallace L.; Barger, Weston; Cook, Mylan

2016-01-01

The goal of this work is, through computational simulations, to provide statistically-based evidence to convince the testing community that a distributed testing approach is superior to a clustered testing approach for most situations. For clustered testing, numerous, repeated test points are acquired at a limited number of test conditions. For distributed testing, only one or a few test points are requested at many different conditions. The statistical techniques of Analysis of Variance (ANOVA), Design of Experiments (DOE) and Response Surface Methods (RSM) are applied to enable distributed test planning, data analysis and test augmentation. The D-Optimal class of DOE is used to plan an optimally efficient single- and multi-factor test. The resulting simulated test data are analyzed via ANOVA and a parametric model is constructed using RSM. Finally, ANOVA can be used to plan a second round of testing to augment the existing data set with new data points. The use of these techniques is demonstrated through several illustrative examples. To date, many thousands of comparisons have been performed and the results strongly support the conclusion that the distributed testing approach outperforms the clustered testing approach.

Measurement Consistency from Magnetic Resonance Images

PubMed Central

Chung, Dongjun; Chung, Moo K.; Durtschi, Reid B.; Lindell, R. Gentry; Vorperian, Houri K.

2010-01-01

Rationale and Objectives In quantifying medical images, length-based measurements are still obtained manually. Due to possible human error, a measurement protocol is required to guarantee the consistency of measurements. In this paper, we review various statistical techniques that can be used in determining measurement consistency. The focus is on detecting a possible measurement bias and determining the robustness of the procedures to outliers. Materials and Methods We review correlation analysis, linear regression, Bland-Altman method, paired t-test, and analysis of variance (ANOVA). These techniques were applied to measurements, obtained by two raters, of head and neck structures from magnetic resonance images (MRI). Results The correlation analysis and the linear regression were shown to be insufficient for detecting measurement inconsistency. They are also very sensitive to outliers. The widely used Bland-Altman method is a visualization technique so it lacks the numerical quantification. The paired t-test tends to be sensitive to small measurement bias. On the other hand, ANOVA performs well even under small measurement bias. Conclusion In almost all cases, using only one method is insufficient and it is recommended to use several methods simultaneously. In general, ANOVA performs the best. PMID:18790405

Effect of Dentin Wetness on the Bond Strength of Universal Adhesives.

PubMed

Choi, An-Na; Lee, Ji-Hye; Son, Sung-Ae; Jung, Kyoung-Hwa; Kwon, Yong Hoon; Park, Jeong-Kil

2017-10-25

The effects of dentin wetness on the bond strength and adhesive interface morphology of universal adhesives have been investigated using micro-tensile bond strength (μTBS) testing and confocal laser scanning microscopy (CLSM). Seventy-two human third molars were wet ground to expose flat dentin surfaces. They were divided into three groups according to the air-drying time of the dentin surfaces: 0 (without air drying), 5, and 10 s. The dentin surfaces were then treated with three universal adhesives: G-Premio Bond, Single Bond Universal, and All-Bond Universal in self-etch or etch-and-rinse mode. After composite build up, a μTBS test was performed. One additional tooth was prepared for each group by staining the adhesives with 0.01 wt % of Rhodamine B fluorescent dye for CLSM analysis. The data were analyzed statistically using ANOVA and Tukey's post hoc tests (α = 0.05). Two-way ANOVA showed significant differences among the adhesive systems and dentin moisture conditions. An interaction effect was also observed ( p < 0.05). One-way ANOVA showed that All-Bond Universal was the only material influenced by the wetness of the dentin surfaces. Wetness of the dentin surface is a factor influencing the micro-tensile bond strength of universal adhesives.

Effect of Dentin Wetness on the Bond Strength of Universal Adhesives

PubMed Central

Lee, Ji-Hye; Son, Sung-Ae; Jung, Kyoung-Hwa; Kwon, Yong Hoon

2017-01-01

The effects of dentin wetness on the bond strength and adhesive interface morphology of universal adhesives have been investigated using micro-tensile bond strength (μTBS) testing and confocal laser scanning microscopy (CLSM). Seventy-two human third molars were wet ground to expose flat dentin surfaces. They were divided into three groups according to the air-drying time of the dentin surfaces: 0 (without air drying), 5, and 10 s. The dentin surfaces were then treated with three universal adhesives: G-Premio Bond, Single Bond Universal, and All-Bond Universal in self-etch or etch-and-rinse mode. After composite build up, a μTBS test was performed. One additional tooth was prepared for each group by staining the adhesives with 0.01 wt % of Rhodamine B fluorescent dye for CLSM analysis. The data were analyzed statistically using ANOVA and Tukey’s post hoc tests (α = 0.05). Two-way ANOVA showed significant differences among the adhesive systems and dentin moisture conditions. An interaction effect was also observed (p < 0.05). One-way ANOVA showed that All-Bond Universal was the only material influenced by the wetness of the dentin surfaces. Wetness of the dentin surface is a factor influencing the micro-tensile bond strength of universal adhesives. PMID:29068404

In vitro assessments of experimental NaF dentifrices containing a prospective calcium phosphate technology.

PubMed

Karlinsey, Robert L; Mackey, Allen C; Stookey, George K; Pfarrer, Aaron M

2009-06-01

To determine the fluoride dose response of experimental NaF dentifrices containing a prospective calcium phosphate technology, along with the corresponding relative enamel and dentin abrasion values. 3 mm diameter bovine enamel specimens were mounted, ground and polished, and softened in a carbopol-lactic acid solution (pH = 5.0) for 36 hours at 37 degrees C. Specimens were then measured for baseline Vickers microhardness and stratified (N = 18, mean VHN = 33) into eight groups. These groups consisted of a placebo paste, four test dentifrices (A, B, C, D) with three of the four (A, B, C) containing a promising calcium phosphate ingredient, Crest Cavity Protection, MI Paste Plus, and PreviDent Booster 5000. The groups were cycled in a lesion reversal pH cycling model consisting of four 2-minute treatment periods (diluted 1:3 with DI water) and one 4-hour acid challenge (carbopol-lactic acid, pH = 5.0) per day. Between these events, specimens were immersed in artificial saliva (pH = 7.0). After 20 days of cycling, the specimens were microdrilled and analyzed for fluoride content, and also measured for Vickers surface microhardness after 10 and 20 days of cycling and after a 2-hour and 16-hour post-cycle acid challenge (carbopol-lactic acid, pH = 5.0). Separately, relative dentin and enamel abrasion (RDA and REA) were performed using the ADA recommended radiotracer method. A fluoride dose response was observed for the test dentifrices after 10 and 20 days of pH cycling, with test dentifrice C promoting the highest remineralization among the groups while both the MI Paste Plus and PreviDent systems provide the least remineralization (one-way ANOVA, SNK, P < 0.05). With respect to enamel fluoride uptake, the group facilitating the highest incorporation of fluoride into the enamel lesion was test dentifrice C, while the least effective NaF system was the MI Paste Plus (one-way ANOVA, SNK, P < 0.05). In terms of formulation abrasion, the REA scores were similar among the test dentifrices, MI Paste Plus, and PreviDent and compared favorably to the ADA reference material score (one-way ANOVA, SNK, P < 0.05); relative to the ADA reference material RDA score, the data indicate that MI Paste Plus was essentially non-abrasive, while PreviDent was significantly more abrasive to dentin (one-way ANOVA, SNK, P < 0.05). Altogether, these data show the developmental test dentifrices demonstrate a fluoride dose response and show great promise in remineralizing white-spot enamel lesions relative to MI Paste Plus and PreviDent.

Robust Variance Estimation with Dependent Effect Sizes: Practical Considerations Including a Software Tutorial in Stata and SPSS

ERIC Educational Resources Information Center

Tanner-Smith, Emily E.; Tipton, Elizabeth

2014-01-01

Methodologists have recently proposed robust variance estimation as one way to handle dependent effect sizes in meta-analysis. Software macros for robust variance estimation in meta-analysis are currently available for Stata (StataCorp LP, College Station, TX, USA) and SPSS (IBM, Armonk, NY, USA), yet there is little guidance for authors regarding…

Color alteration, hydrogen peroxide diffusion, and cytotoxicity caused by in-office bleaching protocols.

PubMed

de Almeida, Letícia Cunha Amaral Gonzaga; Soares, Diana Gabriela; Gallinari, Marjorie Oliveira; de Souza Costa, Carlos Alberto; Dos Santos, Paulo Henrique; Briso, André Luiz Fraga

2015-04-01

This study evaluated the color alteration, cytotoxicity, and hydrogen peroxide (HP) diffusion associated with different in-office bleaching protocols. Bovine enamel/dentin disks were subjected to three bleaching sessions with 35 % HP (three 15-min applications), 35 % HP (one 45-min application), or 20 % HP (one 45-min application). The control group was not bleached. Before bleaching, the disks were adapted to artificial pulp chambers positioned in compartments containing 1 ml of acetate buffer or medium, so that the dentin remained in contact with these substances. Immediately after bleaching, the HP that diffused through the disks was stabilized by acetate buffer and was quantified (two-way repeated measures ANOVA/Fisher's protected least significant difference (PLSD) test; α = 5 %). Cells of mouse dental papilla cell-23 (MDPC-23) were incubated in this culture media for 1 h, followed by analysis of cellular metabolism (methyl tetrazolium assay) (one-way ANOVA/Tukey test; α = 5 %) and morphology (scanning electron microscopy). The specimen color alteration (ΔE) was analyzed by reflection spectrophotometry (two-way repeated measures ANOVA/Fisher's PLSD test; α = 5 %). All protocols showed equal effectiveness at the end of the treatment. HP diffusion was significantly higher in the groups bleached with 35 % HP. Reapplication of 35 % HP resulted in increased diffusion only in the first session; however, the decrease in cell metabolism was similar for all studied protocols. Despite greater peroxide diffusion in the groups treated with 35 % HP, all protocols showed the same effectiveness and were cytotoxic to MDPC-23 cells. Bleaching protocols using high HP concentrations should be avoided because they exert aggressive actions on odontoblast-like cells.

In vitro evaluation of five core materials.

PubMed

Gu, Steven; Rasimick, Brian J; Deutsch, Allan S; Musikant, Barry L

2007-01-01

This in vitro study determined the fracture strength of five core materials supported by two different endodontic dowels. Diametral tensile strength and microhardness of the three resin composite core materials used in this study were also tested. The fracture strength study used one lanthanide-reinforced flowable resin composite (Ti-Core Auto E), one titanium- and lanthanide-reinforced composite (Ti-Core), one lanthanide-reinforced composite (Ti-Core Natural), and two metal-reinforced glass ionomer core materials (Ketac Silver and GC Miracle Mix). Two types of dowels were used: a multitiered, split-shank threaded dowel with a flange (#1 Flexi-Flange) and one without a flange design (#1 Flexi-Post). The specimens were divided into ten groups. Each tooth/dowel and core specimen was placed in a special jig at 45 degrees and subjected to a load by a universal testing machine. The diametral tensile strength and the microhardness of the three resin composite core materials were measured by a universal testing machine and Barcol hardness tester, respectively. All test groups contained ten specimens. The fracture strength value of the resin composite core materials was significantly larger ( p < 0.0001) than those for the metal-reinforced glass-ionomer core materials. Analysis of variance (ANOVA) also showed that the Flexi-Flange dowel interacted with Ti-Core and Ti-Core Auto E to significantly ( p < 0.0013) increase the fracture strength relative to the Flexi-Post. One-way ANOVA revealed that there were no significant differences between them in terms of diametral tensile strength. The Barcol hardness values of the composite core materials were statistically different ( p < 0.0001), with the Ti-Core the highest, followed by Ti-Core Natural, then Ti-Core Auto E. Resin composite core material performed better than glass ionomer material in this in vitro study. The flowable composite core material performed about the same in terms of fracture strength and diametral tensile strength compared with nonflowable composites. Combined with certain core materials, the flange design increased the fracture strength of the tooth/dowel and core combination.

The effect of prior sandblasting of the wire on the shear bond strength of two different types of lingual retainers.

PubMed

Kilinç, Delal Dara; Sayar, Gülşilay

2018-04-07

The aim of this study was to evaluate the effect of total surface sandblasting on the shear bond strength of two different retainer wires. The null hypothesis was that there is no difference in the bond strength of the two types of lingual retainer wires when they are sandblasted. One hundred and sixty human premolar teeth were equally divided into four groups (n=40). A pair of teeth was embedded in self-curing acrylic resin and polished. Retainer wires were applied on the etched and rinsed surfaces of the teeth. Four retainers were used: group 1: braided retainer (0.010×0.028″, Ortho Technology); group 2: sandblasted braided retainer (0.010×0.028″, Ortho Technology); group 3: coaxial retainer (0.0215″ Coaxial, 3M) and group 4: sandblasted coaxial retainer (0.0215″ Coaxial, 3M). The specimens were tested using a universal test machine in shear mode with a crosshead speed of one mm/min. One-way analysis of variance (Anova) was used to determine the significant differences among the groups. There was no significant difference (P=0.117) among the groups according to this test. The null hypothesis was accepted. There was no statistically significant difference among the shear bond strength values of the four groups. Copyright © 2018 CEO. Published by Elsevier Masson SAS. All rights reserved.

Applying the Hájek Approach in Formula-Based Variance Estimation. Research Report. ETS RR-17-24

ERIC Educational Resources Information Center

Qian, Jiahe

2017-01-01

The variance formula derived for a two-stage sampling design without replacement employs the joint inclusion probabilities in the first-stage selection of clusters. One of the difficulties encountered in data analysis is the lack of information about such joint inclusion probabilities. One way to solve this issue is by applying Hájek's…

Surface changes of enamel after brushing with charcoal toothpaste

NASA Astrophysics Data System (ADS)

Pertiwi, U. I.; Eriwati, Y. K.; Irawan, B.

2017-08-01

The aim of this study was to determine the surface roughness changes of tooth enamel after brushing with charcoal toothpaste. Thirty specimens were brushed using distilled water (the first group), Strong® Formula toothpaste (the second group), and Charcoal® Formula toothpaste for four minutes and 40 seconds (equivalent to one month) and for 14 minutes (equivalent to three months) using a soft fleece toothbrush with a mass of 150 gr. The roughness was measured using a surface roughness tester, and the results were tested with repeated ANOVA test and one-way ANOVA. The value of the surface roughness of tooth enamel was significantly different (p<0.05) after brushing for an equivalent of one month and an equivalent of three months. Using toothpaste containing charcoal can increase the surface roughness of tooth enamel.

Kinetics of Hypotension during 50 Sessions of Resistance and Aerobic Training in Hypertensive Patients: a Randomized Clinical Trial

PubMed Central

Damorim, Igor Rodrigues; Santos, Tony Meireles; Barros, Gustavo Willames Pimentel; Carvalho, Paulo Roberto Cavalcanti

2017-01-01

Background Resistance and aerobic training are recommended as an adjunctive treatment for hypertension. However, the number of sessions required until the hypotensive effect of the exercise has stabilized has not been clearly established. Objective To establish the adaptive kinetics of the blood pressure (BP) responses as a function of time and type of training in hypertensive patients. Methods We recruited 69 patients with a mean age of 63.4 ± 2.1 years, randomized into one group of resistance training (n = 32) and another of aerobic training (n = 32). Anthropometric measurements were obtained, and one repetition maximum (1RM) testing was performed. BP was measured before each training session with a digital BP arm monitor. The 50 training sessions were categorized into quintiles. To compare the effect of BP reduction with both training methods, we used two-way analysis of covariance (ANCOVA) adjusted for the BP values obtained before the interventions. The differences between the moments were established by one-way analysis of variance (ANOVA). Results The reductions in systolic (SBP) and diastolic BP (DBP) were 6.9 mmHg and 5.3 mmHg, respectively, with resistance training and 16.5 mmHg and 11.6 mmHg, respectively, with aerobic training. The kinetics of the hypotensive response of the SBP showed significant reductions until the 20th session in both groups. Stabilization of the DBP occurred in the 20th session of resistance training and in the 10th session of aerobic training. Conclusion A total of 20 sessions of resistance or aerobic training are required to achieve the maximum benefits of BP reduction. The methods investigated yielded distinct adaptive kinetic patterns along the 50 sessions. PMID:28380132

LED traffic signal replacement schedules : facilitating smooth freight flows.

DOT National Transportation Integrated Search

2011-11-01

This research details a field study of LED traffic signals in Missouri and develops a replacement schedule based on key findings. : Rates of degradation were statistically analyzed using Analysis of Variance (ANOVA). Results of this research will pro...

Use of electronarcosis to immobilize juvenile lake and shortnose sturgeons for handling and the effects on their behavior

USGS Publications Warehouse

Henyey, E.; Kynard, B.; Zhuang, P.

2002-01-01

Low voltage constant direct current was used to immobilize juvenile lake (Acipenser fulvescens) and shortnose sturgeons (A. brevirostrum). There was no significant difference in time/ the lake or shortnose sturgeons required to exhibit positive rheotaxis between fish immobilized with electricity and control fish (two-way ANOVA, P = 0.11). Fish immobilized with 80 mg L-1 tricaine took a significantly longer time to orient than control fish or fish immobilized with electricity for 5 or 30 min (one-way ANOVA, P = 0.003). Electronarcosis, which produces effects like a chemical anesthetic, is a useful technique for immobilizing juvenile sturgeons for handling. Fish can swim upright as soon as the electricity is turned off, recovery time is shorter than with chemical anesthetics, and the cost of equipment is < 400 USD.

Relationship between innervation zone width and mean muscle fiber conduction velocity during a sustained isometric contraction.

PubMed

Ye, X; Beck, T W; Wages, N P

2015-03-01

To examine the relationship between the biceps brachii muscle innervation zone (IZ) width and the mean muscle fiber conduction velocity (MFCV) during a sustained isometric contraction. Fifteen healthy men performed a sustained isometric elbow flexion exercise at their 60% maximal voluntary contraction (MVC) until they could not maintain the target force. Mean MFCV was estimated through multichannel surface electromyographic recordings from a linear electrode array. Before exercise, IZ width was quantified. Separate non-parametric one-way analyses of variance (ANOVAs) were used to examine whether there was a difference in each mean MFCV variable among groups with different IZ width. In addition, separate bivariate correlations were also performed to examine the relationships between the IZ width and the mean MFCV variables during the fatiguing exercise. There was a significant difference in the percent decline of mean MFCV (%ΔMFCV) among groups with different IZ width (χ(2) (3)=11.571, p=0.009). In addition, there was also a significant positive relationship between the IZ width and the %ΔMFCV (Kendall's tau= 0.807; p<0.001). We believe that such relationship is likely influenced by both muscle fiber size and the muscle fiber type composition.

Comparative study of the fluorescence intensity of dental composites and human teeth submitted to artificial aging.

PubMed

Jablonski, Tatiana; Takahashi, Marcos Kenzo; Brum, Rafeal Torres; Rached, Rodrigo Nunes; Souza, Evelise M

2014-01-01

The aim of this study was to evaluate quantitatively the fluorescence of resin composites and human teeth, and to determine the stability of fluorescence after aging. Ten specimens were built using a 1 mm thick increment of dentin composite overlapped by a 0.5 mm thick increment of enamel composite. Ten sound human molars were sectioned and silicon carbide-polished to obtain enamel and dentin slabs 1.5 mm in thickness. Fluorescence measurements were carried out by a fluorescence spectrophotometer before and after thermocycling (2000 cycles, 5°C and 55°C). One-way analysis of variance (ANOVA) with repeated measures and Tukey's test were performed at a significance level of 5%. Most of the tested composites showed significant differences in fluorescence both before and after aging (P < 0.05). Opallis was the only composite whose fluorescence was similar to that of human teeth at both periods of evaluation (P > 0.05), and was the only composite that showed comparable results of fluorescence to the tooth structure before and after thermocycling. With the exception of Filtek Supreme, there were significant reductions in fluorescence intensity for all the tested composites (P < 0.05).

Impact of Attending the Diwaniyyah on Kuwaiti Men’s Health

PubMed Central

Al-Sejari, Maha

2017-01-01

Diwaniyyah is a traditional gathering place for men in the Arab world. Most Kuwaiti men spend most of their time in the diwaniyyah, which is an important part of their social activity. The current study aims to examine the relationship between the diwaniyyah as a social community and the attendees’ health conditions to determine how the diwaniyyah affects Kuwaiti men’s lifestyle. A questionnaire was distributed among 500 men 16 years old and above. It comprised five parts of data: sociodemographic information, frequency of attending diwaniyyah, types of diwaniyyahs, and health lifestyle of members attending the diwaniyyah. A t-test, one-way analysis of variance (ANOVA) and linear regression were used to test the study’s questions. A significant difference in negative effect of diwaniyyahs on attendees’ physical health was detected according to the participants’ ethnic roots, affection for and length of time they spent in the diwaniyyah, time of day or evening that they visited, and dealing with chronic disease (p < .05). Also the results reveal significant differences in the positive effect of diwaniyyahs on the attendees’ lifestyle behavior according to their age, occupational status, religious affiliation, government, prayer time, and type of diwaniyyah (p < .05). PMID:29020851

Aspects of self differ among physically active and inactive youths.

PubMed

Veselska, Zuzana; Madarasova Geckova, Andrea; Reijneveld, Sijmen A; van Dijk, Jitse P

2011-06-01

The aim of this paper was to explore connection between aspects of self and levels of physical activity among adolescents. An international sample of 501 elementary school students (mean age 14.7 ± 0.9 years, 48.5% males) from the Slovak and Czech Republics completed the Self-competence/Self-liking Scale, the Rosenberg's Self-esteem Scale, the Self-efficacy Scale and a question on their physical activity. Respondents were divided into three groups: (1) no physical activity; (2) infrequent physical activity; (3) everyday physical activity. Data were explored with one-way analysis of variance (ANOVA) separately for each gender. Boys with no physical activity had lower self-liking and social self-efficacy in comparison with boys with everyday physical activity. Girls with no physical activity had lower positive self-esteem, self-liking, self-competence, general and social self-efficacy and higher negative self-esteem in comparison with girls with infrequent and everyday physical activity. Regular physical activity is connected with psychological aspects of self among adolescents, especially girls. Incorporating physical activity into the life of youths on a regular basis might lead to the enhancement of their feelings of self-worth and self-efficacy.

[Eppendorf Schizophrenia Inventory (ESI) vs. Frankfurt Complaint Questionnaire (FCQ). Direct comparison in a clinical trial].

PubMed

Mass, R

2005-09-01

This study is the first to directly compare two clinical questionnaires which are both aimed at self-experienced cognitive dysfunctions of schizophrenia: Eppendorf Schizophrenia Inventory (ESI) and Frankfurt Complaint Questionnaire (FCQ). Evaluated were (a) diagnostic validity, (b) psychometric properties, (c) scale intercorrelations, and (d) factor analytic stability. Ad (a): schizophrenic subjects (n=36) show highly significant increases in the ESI scales and sum score when compared to other clinical groups (patients with depression, alcohol dependence, or obsessive-compulsive disorder, n>30, respectively); on the other hand, the FCQ yields no systematic group differences. Ad (b): mean of reliability coefficients (Cronbach alpha) of the ESI scales is r(tt)=0.86, mean of reliability coefficients of the FCQ scales is significantly lower. Ad (c): the mean intercorrelation between ESI and FCQ scales amounts to r(xy)=0.56 (minimum 0.29, maximum 0.73), corresponding to an average shared variance of about 31%. Ad (d): factor analysis yielded an ESI factor and a FBF factor; one-way ANOVA with the factor scores confirms the diagnostic validity of the ESI. ESI and FCQ measure essentially different aspects of schizophrenic psychopathology. Regarding reliability and diagnostic validity, the ESI is superior to the FCQ.

Potential implications of mine dusts on human health: A case study of Mukula Mine, Limpopo Province, South Africa

PubMed Central

Momoh, Abuh; E. Mhlongo, Sphiwe; Abiodun, Olukoga; Muzerengi, Confidence; Mudanalwo, Matamela

2013-01-01

Objective: The purpose of this study was to estimate the levels of Suspended Particulate Matter (SPM) in ambient air within Mukula mine and the potential risks to mineworkers and inhabitants of the adjoining Mukula community’s health. Methods : An SPM was used to measure the levels of particulate matter (PM10) in and around the mining site. One-way Analysis of Variance (ANOVA) was used to determine significance level of PM10 in ambient air. Results: Suspended particulate matter in the air ranged from 60.25 to 1820.45 µg/m3. The lowest value of SPM was more than four times the required World Health Organisation’s allowable level in ambient air, which the mine workers and locals would be inhaling. Conclusion: Continuous inhalation of mine dusts by mine workers and locals could result in pulmonary fibrosis, silicosis and lung cancer. The findings from this study support the need to have in place the necessary control measures that will drastically reduce SPM in the air. Such measure includes wet drilling and blasting, sprinkling of water on the mine roads and planting of vegetation around the mines and neighbouring communities. PMID:24550971

Validation of different spectrophotometric methods for determination of vildagliptin and metformin in binary mixture

NASA Astrophysics Data System (ADS)

Abdel-Ghany, Maha F.; Abdel-Aziz, Omar; Ayad, Miriam F.; Tadros, Mariam M.

New, simple, specific, accurate, precise and reproducible spectrophotometric methods have been developed and subsequently validated for determination of vildagliptin (VLG) and metformin (MET) in binary mixture. Zero order spectrophotometric method was the first method used for determination of MET in the range of 2-12 μg mL-1 by measuring the absorbance at 237.6 nm. The second method was derivative spectrophotometric technique; utilized for determination of MET at 247.4 nm, in the range of 1-12 μg mL-1. Derivative ratio spectrophotometric method was the third technique; used for determination of VLG in the range of 4-24 μg mL-1 at 265.8 nm. Fourth and fifth methods adopted for determination of VLG in the range of 4-24 μg mL-1; were ratio subtraction and mean centering spectrophotometric methods, respectively. All the results were statistically compared with the reported methods, using one-way analysis of variance (ANOVA). The developed methods were satisfactorily applied to analysis of the investigated drugs and proved to be specific and accurate for quality control of them in pharmaceutical dosage forms.

Antimicrobial Effect of Jasminum grandiflorum L. and Hibiscus rosa-sinensis L. Extracts Against Pathogenic Oral Microorganisms--An In Vitro Comparative Study.

PubMed

Nagarajappa, Ramesh; Batra, Mehak; Sharda, Archana J; Asawa, Kailash; Sanadhya, Sudhanshu; Daryani, Hemasha; Ramesh, Gayathri

2015-01-01

To assess and compare the antimicrobial potential and determine the minimum inhibitory concentration (MIC) of Jasminum grandiflorum and Hibiscus rosa-sinensis extracts as potential anti-pathogenic agents in dental caries. Aqueous and ethanol (cold and hot) extracts prepared from leaves of Jasminum grandiflorum and Hibiscus rosa-sinensis were screened for in vitro antimicrobial activity against Streptococcus mutans and Lactobacillus acidophilus using the agar well diffusion method. The lowest concentration of every extract considered as the minimum inhibitory concentration (MIC) was determined for both test organisms. Statistical analysis was performed with one-way analysis of variance (ANOVA). At lower concentrations, hot ethanol Jasminum grandiflorum (10 μg/ml) and Hibiscus rosa-sinensis (25 μg/ml) extracts were found to have statistically significant (P≤0.05) antimicrobial activity against S. mutans and L. acidophilus with MIC values of 6.25 μg/ml and 25 μg/ml, respectively. A proportional increase in their antimicrobial activity (zone of inhibition) was observed. Both extracts were found to be antimicrobially active and contain compounds with therapeutic potential. Nevertheless, clinical trials on the effect of these plants are essential before advocating large-scale therapy.

Metabolic discrimination of sea buckthorn from different Hippophaë species by 1H NMR based metabolomics.

PubMed

Liu, Yue; Fan, Gang; Zhang, Jing; Zhang, Yi; Li, Jingjian; Xiong, Chao; Zhang, Qi; Li, Xiaodong; Lai, Xianrong

2017-05-08

Sea buckthorn (Hippophaë; Elaeagnaceae) berries are widely consumed in traditional folk medicines, nutraceuticals, and as a source of food. The growing demand of sea buckthorn berries and morphological similarity of Hippophaë species leads to confusions, which might cause misidentification of plants used in natural products. Detailed information and comparison of the complete set of metabolites of different Hippophaë species are critical for their objective identification and quality control. Herein, the variation among seven species and seven subspecies of Hippophaë was studied using proton nuclear magnetic resonance ( 1 H NMR) metabolomics combined with multivariate data analysis, and the important metabolites were quantified by quantitative 1 H NMR (qNMR) method. The results showed that different Hippophaë species can be clearly discriminated and the important interspecific discriminators, including organic acids, L-quebrachitol, and carbohydrates were identified. Statistical differences were found among most of the Hippophaë species and subspecies at the content levels of the aforementioned interspecific discriminators via qNMR and one-way analysis of variance (ANOVA) test. These findings demonstrated that 1 H NMR-based metabolomics is an applicable and effective approach for simultaneous metabolic profiling, species differentiation and quality assessment.

A comparison between three different pit and fissure sealants with regard to marginal integrity.

PubMed

Fernandes, Kristlee Sabrin; Chalakkal, Paul; de Ataide, Ida de Noronha; Pavaskar, Rajdeep; Fernandes, Precylia Philo; Soni, Harleen

2012-04-01

THE AIM OF THIS STUDY IS TO COMPARE THE OCCURRENCE OF ENAMEL FRACTURES, SEALANT FRACTURES AND MARGINAL FISSURES AFTER PLACEMENT OF THREE SEALANTS: Helioseal F, Conseal F and Clinpro. Thirty individuals between 13 and 15 years of age, diagnosed with pit and fissure caries by visual and DIAGNOdent examination, were chosen for sealant placement on their mandibular molars. The sealants were placed at random, after which, impressions were made with polyvinyl siloxane and casts were fabricated. Dies were prepared, each of which were sputter coated with gold in order to be examined under a scanning electron microscope. The following morphologies were analyzed from dies from each of the sealant groups: Continuous margins, sealant fractures, marginal fissures and enamel fractures. After six months, they were recalled for impression making. Dies were prepared and microscopically analyzed as mentioned. Based on the time of evaluation, there were two groups: Initial group (soon after placement) and final group (after six months). Statistical analysis was done using the paired 't' test and One-way analysis of variance (ANOVA). Clinpro had the greatest fracture resistance, followed by Conseal F and Helioseal F. The occurrence of marginal fissure was found to be least with Clinpro.

Antimicrobial efficacy of octenidine hydrochloride, MTAD and chlorhexidine gluconate mixed with calcium hydroxide.

PubMed

Tirali, Resmiye Ebru; Gulsahi, Kamran; Cehreli, Sevi Burcak; Karahan, Zeynep Ceren; Uzunoğlu, Emel; Elhan, Atilla

2013-05-01

The aim of this in vitro study was to investigate whether mixing with calcium hydroxide [Ca(OH)2] affects the antimicrobial action of Octenidine hydrochloride (Octenisept), MTAD and chlorhexidine against Enterococcus faecalis and Candida albicans. Freshly grown cultures of Enterococcus faecalis, Candida albicans and a mixture of both strains were incubated in agar plates containing brain-heart infusion broth (BHIB). Zones of inhibition were measured at 24 and 48 hours. Statistical analysis was performed using Mann-Whitney U test and Kruskal-Wallis one-way analysis of variance (ANOVA, both p=0.05). Mixing with Ca(OH)2 significantly increased the antibacterial effect of Octenisept (p<0.05), but did not alter its antifungal activity. Only chlorhexidine showed more antibacterial and antifungal efficiency compared to its Ca(OH)2-mixed version (both p<0.05). Mixing with Ca(OH)2 decreased the antibacterial efficacy of MTAD, but increased its antifungal effect (both p<0.05). These results demonstrate the differential effects of Ca(OH)2 addition on the antimicrobial action of the tested endodontic medicaments in vitro. Ca(OH)2 was as effective as its combination with all of the tested medicaments.

The failure of medical education to develop moral reasoning in medical students

PubMed Central

Murrell, Vicki S.

2014-01-01

Objectives The goal of this study was to determine differences in moral judgment among students in medical school. Methods This cross-sectional study involved students currently enrolled in undergraduate medical education. Recruited via email, 192 students took an online version of the Defining Issues Test to determine their current stage of moral judgment, as well as their percentage of post conventional thought. Independent variables included year of graduation, which indicated curriculum completion as well as participation in a professionalism course. Data was analyzed primarily using One-Way Analysis of Variance. Results Of the 192 participants, 165 responses were utilized. ANOVA showed no significant differences in moral judgment between or among any of the student cohorts, which were grouped by year of matriculation. Comparisons included students in the four years of medical school, divided by graduation year; students about to graduate (n=30) vs. those still in school (n=135); and students who had participated in a course in professionalism (n=91) vs. those who had not (n=74). Conclusions These results demonstrate a lack of evolution in the moral reasoning of medical students and raise the issue of what might stimulate positive changes in moral judgment during the medical school experience. PMID:25543016

Potential implications of mine dusts on human health: A case study of Mukula Mine, Limpopo Province, South Africa.

PubMed

Momoh, Abuh; E Mhlongo, Sphiwe; Abiodun, Olukoga; Muzerengi, Confidence; Mudanalwo, Matamela

2013-11-01

Objective : The purpose of this study was to estimate the levels of Suspended Particulate Matter (SPM) in ambient air within Mukula mine and the potential risks to mineworkers and inhabitants of the adjoining Mukula community's health. Methods : An SPM was used to measure the levels of particulate matter (PM10) in and around the mining site. One-way Analysis of Variance (ANOVA) was used to determine significance level of PM10 in ambient air. Results : Suspended particulate matter in the air ranged from 60.25 to 1820.45 µg/m(3). The lowest value of SPM was more than four times the required World Health Organisation's allowable level in ambient air, which the mine workers and locals would be inhaling. Conclusion : Continuous inhalation of mine dusts by mine workers and locals could result in pulmonary fibrosis, silicosis and lung cancer. The findings from this study support the need to have in place the necessary control measures that will drastically reduce SPM in the air. Such measure includes wet drilling and blasting, sprinkling of water on the mine roads and planting of vegetation around the mines and neighbouring communities.

Plasma apelin levels, blood pressure and cardiovascular risk factors in a coastal Chinese population.

PubMed

Zhu, Pengli; Huang, Feng; Lin, Fan; Yuan, Yin; Chen, Falin; Li, Qiaowei

2013-11-01

To describe the relationship of plasma apelin levels with blood pressure in a coastal Chinese population. This cross-sectional study included a total of 1031 subjects from the coastal areas of China. One-way analysis of variance (ANOVA) and linear trend test, Pearson's correlation analysis, as well as multivariate linear regression analysis were used to evaluate the association between plasma apelin levels and blood pressure. Plasma apelin levels dropped with increasing quartiles of systolic blood pressure (SBP), diastolic blood pressure (DBP), and mean arterial blood pressure (MABP) (all P<0.001). SBP, DBP, and MABP values decreased as the apelin levels increased within the quartiles. After adjusting for age and gender, the significant differences in SBP, DBP, and MABP between the groups within the apelin quartiles remained (all P<0.05). A significant negative correlation between SBP, DBP, as well as MABP and apelin levels was observed (all P<0.01); even after adjusting for cardiovascular confounding factors, this negative correlation remained (all P<0.001). A negative correlation between plasma apelin levels and blood pressure was found in this 1000-population-based epidemiological study. Apelin may become a potential therapeutic target of anti-hypertensive treatment.

Creating a flipbook as a medium of instruction based on the research on activity test of kencur extract

NASA Astrophysics Data System (ADS)

Monika, Icha; Yeni, Laili Fitri; Ariyati, Eka

2016-02-01

This research aimed to reveal the validity of the flipbook as a medium of learning for the sub-material of environmental pollution in the tenth grade based on the results of the activity test of kencur (Kaempferia galanga) extract to control the growth of the Fusarium oxysporum fungus. The research consisted of two stages. First, testing the validity of the medium of flipbook through validation by seven assessors and analyzed based on the total average score of all aspects. Second, testing the activity of the kencur extract against the growth of Fusarium oxysporum by using the experimental method with 10 treatments and 3 repetitions which were analyzed using one-way analysis of variance (ANOVA) test. The making of the flipbook medium was done through the stages of analysis for the potential and problems, data collection, design, validation, and revision. The validation analysis on the flipbook received an average score of 3.7 and was valid to a certain extent, so it could be used in the teaching and learning process especially in the sub-material of environmental pollution in the tenth grade of the senior high school.

Smart campus: Data on energy consumption in an ICT-driven university.

PubMed

Popoola, Segun I; Atayero, Aderemi A; Okanlawon, Theresa T; Omopariola, Benson I; Takpor, Olusegun A

2018-02-01

In this data article, we present a comprehensive dataset on electrical energy consumption in a university that is practically driven by Information and Communication Technologies (ICTs). The total amount of electricity consumed at Covenant University, Ota, Nigeria was measured, monitored, and recorded on daily basis for a period of 12 consecutive months (January-December, 2016). Energy readings were observed from the digital energy meter (EDMI Mk10E) located at the distribution substation that supplies electricity to the university community. The complete energy data are clearly presented in tables and graphs for relevant utility and potential reuse. Also, descriptive first-order statistical analyses of the energy data are provided in this data article. For each month, the histogram distribution and time series plot of the monthly energy consumption data are analyzed to show insightful trends of energy consumption in the university. Furthermore, data on the significant differences in the means of daily energy consumption are made available as obtained from one-way Analysis of Variance (ANOVA) and multiple comparison post-hoc tests. The information provided in this data article will foster research development in the areas of energy efficiency, planning, policy formulation, and management towards the realization of smart campuses.

What affects the subjective sleep quality of hospitalized elderly patients?

PubMed

Park, Mi Jeong; Kim, Kon Hee

2017-03-01

The present study aimed to identify the factors affecting the subjective sleep quality in elderly inpatients. The participants were 290 older adults admitted in three general hospitals. Data were collected using a structured questionnaire consisting of scales for general characteristics, sleep quality, activities of daily living, instrumental activities of daily living and depression. Collected data were analyzed by descriptive statistics, t-test, one-way anova, Scheffé post-hoc, Pearson's correlation coefficient and stepwise multiple regression. There were statistically significant differences in sleep quality according to age, education level, marital status, monthly income and number of cohabitants. The most powerful predictor of sleep quality was depression (P < 0.01, R 2  = 0.30). Five variables, depression, perceived health status, diagnosis, number of cohabitants and duration of hospitalization; explained 43.0% of the total variance in sleep quality. Elderly inpatients suffered from low sleep quality, and depression affected their sleep. We should develop and apply hospital-tailored sleep interventions considering older adults' depression, and then hospitalized older adults' sleep could improve. Furthermore, it is useful to identify other sleep-related factors. Geriatr Gerontol Int 2017; 17: 471-479. © 2016 Japan Geriatrics Society.

Determination of the best pre-jump height for improvement of two-legged vertical jump.

PubMed

Jafari, Mahsa; Zolaktaf, Vahid; Marandi, Sayyed M

2013-04-01

Athletic performance in many sports depends on two-legged vertical jump. The objective of this study was to examine the effect of different pre-jump height exercises on two-legged vertical jump and to determine the best pre-jump height(s). Subjects included 35 females and 42 males. By matched randomized sampling, subjects of each sex were assigned into four groups, namely, control, 10-cm hurdle, 20-cm hurdle, and 30-cm hurdle. They participated in the same training program for 6 weeks. Statistical analyses were based on one-way and repeated-measure analysis of variance (ANOVA). Analysis of the data showed that practice over hurdles of 10 cm was better than no hurdle and hurdles of >10 cm. Also, jump attempts over hurdles were efficient for trained athletes, but not for untrained athletes. For both sexes, the rate of spike improvement was much better in the experimental groups than in the control groups; it was independent from the rate of progress in jump, which was relatively less evident. It is likely that rather than increasing jump height, training over hurdle enabled the players to use a higher percent of their jump potentials.

Reduced somatosensory impairment by piezosurgery during orthognathic surgery of the mandible.

PubMed

Brockmeyer, Phillipp; Hahn, Wolfram; Fenge, Stefan; Moser, Norman; Schliephake, Henning; Gruber, Rudolf Matthias

2015-09-01

This clinical trial aimed to test the hypothesis that piezosurgery causes reduced nerval irritations and, thus, reduced somatosensory impairment when used in orthognathic surgery of the mandible. To this end, 37 consecutive patients with Angle Class II and III malocclusion were treated using bilateral sagittal split osteotomies (BSSO) of the mandible. In a split mouth design, randomized one side of the mandible was operated using a conventional saw, while a piezosurgery device was used on the contralateral side. In order to test the individual qualities of somatosensory function, quantitative sensory testings (QSTs) were performed 1 month, 6 months and 1 year after surgery. A comparison of the data using a two-way analysis of variance (ANOVA) revealed a significant reduction in postoperative impairment in warm detection threshold (WDT) (P = 0.046), a decreased dynamic mechanical allodynia (ALL) (P = 0.002) and a decreased vibration detection threshold (VDT) (P = 0.030) on the piezosurgery side of the mandible as opposed to the conventionally operated control side. In the remaining QSTs, minor deviations from the preoperative baseline conditions and a more rapid regression could be observed. Piezosurgery caused reduced somatosensory impairment and a faster recovery of somatosensory functions in the present investigation.

Self-determined to exercise? Leisure-time exercise behavior, exercise motivation, and exercise dependence in youth.

PubMed

Symons Downs, Danielle; Savage, Jennifer S; DiNallo, Jennifer M

2013-02-01

Scant research has examined the determinants of primary exercise dependence symptoms in youth. Study purposes were to examine sex differences across leisure-time exercise behavior, motivation, and primary exercise dependence symptoms in youth and the extent to which exercise behavior and motivation predicted exercise dependence within the Self-Determination Theory framework. Adolescents (N = 805; mean age = 15 years; 46% girls) completed measures of exercise behavior, motivation, and exercise dependence in health/PE classes. One-way ANOVA revealed boys scored higher than girls on leisure-time exercise behavior, exercise dependence symptoms, and most of the exercise motivation subscales. Hierarchical regression analyses indicated a) sex, exercise behavior, motivation, and their interaction terms explained 39% of the variance in primary exercise dependence; b) Integrated Regulation and Introjected Regulation were important determinants of exercise dependence; and c) sex moderated the contributions of External Regulation for predicting exercise dependence such that boys in the high and low external regulation groups had higher symptoms than girls in the high and low external regulation groups. These preliminary findings support the controlled dimensions of Integrated Regulation (boys, girls), Introjected Regulation (boys, girls), and External Regulation (boys only) are important determinants of primary exercise dependence symptoms.

Shear bond strength of indirect composite material to monolithic zirconia.

PubMed

Sari, Fatih; Secilmis, Asli; Simsek, Irfan; Ozsevik, Semih

2016-08-01

This study aimed to evaluate the effect of surface treatments on bond strength of indirect composite material (Tescera Indirect Composite System) to monolithic zirconia (inCoris TZI). Partially stabilized monolithic zirconia blocks were cut into with 2.0 mm thickness. Sintered zirconia specimens were divided into different surface treatment groups: no treatment (control), sandblasting, glaze layer & hydrofluoric acid application, and sandblasting + glaze layer & hydrofluoric acid application. The indirect composite material was applied to the surface of the monolithic zirconia specimens. Shear bond strength value of each specimen was evaluated after thermocycling. The fractured surface of each specimen was examined with a stereomicroscope and a scanning electron microscope to assess the failure types. The data were analyzed using one-way analysis of variance (ANOVA) and Tukey LSD tests (α=.05). Bond strength was significantly lower in untreated specimens than in sandblasted specimens (P<.05). No difference between the glaze layer and hydrofluoric acid application treated groups were observed. However, bond strength for these groups were significantly higher as compared with the other two groups (P<.05). Combined use of glaze layer & hydrofluoric acid application and silanization are reliable for strong and durable bonding between indirect composite material and monolithic zirconia.

Fabrication and Evaluation of Bis-GMA/TEGDMA Dental Resins/Composites Containing Nano Fibrillar Silicate

PubMed Central

Tian, Ming; Gao, Yi; Liu, Yi; Liao, Yiliang; Hedin, Nyle E.; Fong, Hao

2008-01-01

Objective To investigate the reinforcement of Bis-GMA/TEGDMA dental resins (without conventional glass filler) and composites (with conventional glass filler) with various mass fractions of nano fibrillar silicate (FS). Methods Three dispersion methods were studied to separate the silanized FS as nano-scaled single crystals and uniformly distribute them into dental matrices. The photo-curing behaviors of the Bis-GMA/TEGDMA/FS resins were monitored in situ by RT-NIR to study the photopolymerization rate and the vinyl double bond conversion. Mechanical properties (flexural strength, elastic modulus and work of fracture) of the nano FS reinforced resins/composites were tested, and Analysis of Variance (ANOVA) was used for the statistical analysis of the acquired data. The morphology of nano FS and the representative fracture surfaces of its reinforced resins/composites were examined by SEM/TEM. Results Impregnation of small mass fractions (1 % and 2.5 %) of nano FS into Bis-GMA/TEGDMA (50/50 mass ratio) dental resins/composites improved the mechanical properties substantially. Larger mass fraction of impregnation (7.5 %), however, did not further improve the mechanical properties (one way ANOVA, P > 0.05) and may even reduce the mechanical properties. The high degree of separation and uniform distribution of nano FS into dental resins/composites was a challenge. Impregnation of nano FS into dental resins/composites could result in two opposite effects: a reinforcing effect due to the highly separated and uniformly distributed nano FS single crystals, or a weakening effect due to the formation of FS agglomerates/particles. Significance Uniform distribution of highly separated nano FS single crystals into dental resins/composites could significantly improve the mechanical properties of the resins/composites. PMID:17572485

The effects of caudal mobilisation with movement (MWM) and caudal self-mobilisation with movement (SMWM) in relation to restricted internal rotation in the hip: A randomised control pilot study.

PubMed

Walsh, Riche; Kinsella, Sharon

2016-04-01

A loss of internal rotation (IR) of the hip is associated with hip pathology. Improving IR may improve hip range of motion (ROM) or prevent hip pathology. The purpose of this study was to compare the immediate effects of caudal mobilisation with movement (MWM) and caudal self-mobilisation with movement (SMWM) on young healthy male subjects with reduced IR of the hip. A randomised controlled trial was performed. Twenty-Two subjects were randomised into a MWM group (n = 6), SMWM group (n = 8) or a control group (n = 8). The primary outcome measures included the functional internal rotation test (FIRT) for the hip and the passive seated internal rotation test (SIRT) for the hip. Outcomes were captured at baseline and immediately after one treatment of MWMs, SMWMs or control. A two-way analysis of variance (ANOVA), group × time interaction was conducted. The ANOVA revealed the only significant improvement was in the MWM group for the FIRT (p = 0.01), over the control group. Subjects with reduced IR of the hip who receive a single session of MWMs exhibited significantly improved functional IR of their hip than the control group. From the data presented, it can be suggested that caudal MWMs of the hip appear to have a positive effect on functional IR of healthy young hips. This may be due to addressing the positional fault theory or the arthrogenic muscular inhibition theory. SMWMs may be effective in augmenting treatments for patients waiting for hip operations. Copyright © 2016 Elsevier Ltd. All rights reserved.

Oxygen Saturation of Retinal Vessels in All Stages of Diabetic Retinopathy and Correlation to Ultra-Wide Field Fluorescein Angiography.

PubMed

Guduru, Abhilash; Martz, Teresa G; Waters, Alexa; Kshirsagar, Abhijit V; Garg, Seema

2016-10-01

The purpose of this study was to determine retinal hemoglobin oxygen saturation (SO2) in patients with diabetic retinopathy (DR) using retinal oximetry (RO) and to correlate the degree of retinal ischemia using intravenous fluorescein angiography (IVFA). This is a single-center cross-sectional cohort study. Twenty-seven controls and 60 adult patients with diabetes mellitus (16 without DR and 44 with DR) were enrolled. Patients were stratified according to DR severity. Using RO, SO2 was measured in major retinal arterioles (SaO2) and venules (SvO2). Using IVFA, the percentage of retinal ischemia in 31 patients with DR was calculated and correlated with RO. Pairwise one-way analysis of variance (ANOVA) showed a significant increase in SaO2 and SvO2 in patients with proliferative DR (PDR) compared with controls (SaO2: PDR, 100 ± 7% vs. controls, 91 ± 4% [P = 0.003]; SvO2: PDR, 66 ± 11% vs. controls, 53 ± 6% [P < 0.00001]). The percentage of retinal ischemia also increased with DR severity: ANOVA showed a significant difference in retinal ischemia between all categories of nonproliferative DR vs. PDR: 2.31 ± 2% vs. 7.92 ± 9% (P = 0.017), respectively. Pearson two-tailed correlation showed significant correlation between SaO2 and ischemia (R = 0.467, P = 0.011). Hemoglobin oxygen saturation of retinal arterioles and venules increases with DR severity; SaO2 correlates with increasing ischemia measured by IVFA. Retinal oximetry may complement current imaging strategies to noninvasively augment the diagnosis and risk stratification of patients with diabetes.

The Effect of Different Chemical Surface Treatments of Denture Teeth on Shear Bond Strength: A Comparative Study

PubMed Central

Palekar, Umesh; Awinashe, Vaibav; Mishra, Sunil Kumar; Kawadkar, Abhishek; Rahangdale, Tripti

2014-01-01

Background: The development of better cross linked acrylic resin teeth has solved the problems related to wearing and discoloration of acrylic teeth. The same cross linking at ridge lap region acts as a double edge sword as it weakens the bond between denture base and tooth. Aim of Study: The purpose of study was to evaluate the effect of surface treatment on the bond strength of resin teeth to denture base resin using monomethyl methacrylate monomer and dichloromethane with no surface treatment acting as control. Settings and Design:Denture base cylinder samples in wax (n=180) were made with maxillary central incisor attached at 450 (JIST 6506). These samples were randomly and equally divided into three groups of 60 each. These specimens were then flasked, dewaxed as per the standard protocol. Materials and Methods: Before acrylization, ridge lap area was treated as follows: Group A- no surface treatment act as control, Group B treated with monomethyl methacrylate monomer, Group C treated with dichloromethane. Digitally controlled acryliser was used for acrylization as per manufacturer’s instructions and shear bond strength was tested on Universal Testing Machine (Servo Hydraulic, 50kN High Strain, BISS Research). Statistical Analysis used: Result was statistically analyzed with One-way analysis of variance (ANOVA) and Post-hoc ANOVA Tukey’s HSD test at 5% level of significance. Results: The application of dichloromethane showed increased bond strength between cross linked acrylic resin teeth and heat cure denture base resin followed by monomethyl methacrylate monomer and control group. Conclusion: The application of dichloromethane on the ridge lap surface of the resin teeth before packing of the dough into the mold significantly increased the bond strength between cross linked acrylic resin teeth and heat cure denture base resin. PMID:25121057

Study of the Impact of Educational Behavioral Interventions on Fatigue in Mothers in the Postpartum Period in the Groups of Face-to-Face and Electronic Training

PubMed Central

Gholami, Zahra; Mohammadirizi, Soheila; Bahadoran, Parvin

2017-01-01

Background: Maternal fatigue in the postpartum period include factors that affect the quality of life and health of both the mother and newborn. This study aimed to investigate two educational approaches regarding mother's fatigue in the postpartum period. Materials and Methods: This experimental study was performed among 110 pregnant mothers during their postpartum care using random sampling. The participants were divided in three groups, namely, face-to-face, e-learning, and control groups. Interventions included individual meetings between the researcher and mothers in the face-to-face group and giving educational compact disc to the e-learning department to improve maternal fatigue. Personal information and fertility data was obtained (before training); the maternal fatigue questionnaire Fatigue Severity Scale (FSS) was completed before and after any type of (face-to-face, e-learning, and control) education. Obtained data were analyzed using one-way analysis of variance (ANOVA) and repeated-measures ANOVA. Results: Results showed that both face-to-face and e-learning methods had similar maternal fatigue scores. The average change on the maternal fatigue score in the second treatment was (p = 0.02) and the third treatment was (p < 0.001)among three groups that was indicative of significant statistical differences. Similarly, there was no statistically significant difference in the average maternal fatigue score between the two groups before the intervention and in the second and third groups after the intervention. Therefore, over time, the training was unaffected. Conclusions: The findings of this study indicate that both face-to-face and e-learning methods are effective to reduce maternal postpartum fatigue. PMID:29184586

Fabrication and evaluation of Bis-GMA/TEGDMA dental resins/composites containing nano fibrillar silicate.

PubMed

Tian, Ming; Gao, Yi; Liu, Yi; Liao, Yiliang; Hedin, Nyle E; Fong, Hao

2008-02-01

To investigate the reinforcement of Bis-GMA/TEGDMA dental resins (without conventional glass filler) and composites (with conventional glass filler) with various mass fractions of nano fibrillar silicate (FS). Three dispersion methods were studied to separate the silanized FS as nano-scaled single crystals and uniformly distribute them into dental matrices. The photo-curing behaviors of the Bis-GMA/TEGDMA/FS resins were monitored in situ by RT-NIR to study the photopolymerization rate and the vinyl double bond conversion. Mechanical properties (flexural strength, elastic modulus and work-of-fracture) of the nano FS reinforced resins/composites were tested, and analysis of variance (ANOVA) was used for the statistical analysis of the acquired data. The morphology of nano FS and the representative fracture surfaces of its reinforced resins/composites were examined by SEM/TEM. Impregnation of small mass fractions (1% and 2.5%) of nano FS into Bis-GMA/TEGDMA (50/50 mass ratio) dental resins/composites improved the mechanical properties substantially. Larger mass fraction of impregnation (7.5%), however, did not further improve the mechanical properties (one way ANOVA, P>0.05) and may even reduce the mechanical properties. The high degree of separation and uniform distribution of nano FS into dental resins/composites was a challenge. Impregnation of nano FS into dental resins/composites could result in two opposite effects: a reinforcing effect due to the highly separated and uniformly distributed nano FS single crystals, or a weakening effect due to the formation of FS agglomerates/particles. Uniform distribution of highly separated nano FS single crystals into dental resins/composites could significantly improve the mechanical properties of the resins/composites.

Evaluation of the effect of aromatherapy with Rosa damascena Mill. on postoperative pain intensity in hospitalized children in selected hospitals affiliated to Isfahan University of Medical Sciences in 2013: A randomized clinical trial

PubMed Central

Marofi, Maryam; Sirousfard, Motahareh; Moeini, Mahin; Ghanadi, Alireza

2015-01-01

Background: Pain is the common complication after a surgery. The aim of this study was to evaluate the effect of aromatherapy with Rosa damascena Mill. on the postoperative pain in children. Materials and Methods: In a double-blind, placebo-controlled clinical trial, we selected 64 children of 3–6 years of age through convenient sampling and divided them randomly into two groups. Patients in group A were given inhalation aromatherapy with R. damascena Mill., and in group B, the patients were given almond oil as a placebo. Inhalation aromatherapy was used at the first time of subjects’ arrival to the ward and then at 3, 6, 9, and 12 h afterward. Common palliative treatments to relieve pain were used in both groups. Thirty minutes after aromatherapy, the postoperative pain in children was evaluated with the Toddler Preschooler Postoperative Pain Scale (TPPPS). Data were statistically analyzed using Chi-square test, one-way analysis of variance (ANOVA), and repeated measures ANOVA. Results: There was no significant difference in pain scores at the first time of subjects’ arrival to the ward (before receiving any aromatherapy or palliative care) between the two groups. After each time of aromatherapy and at the end of treatment, the pain score was significantly reduced in the aromatherapy group with R. damascena Mill. compared to the placebo group. Conclusions: According to our results, aromatherapy with R. damascena Mill. can be used in postoperative pain in children, together with other common treatments without any significant side effects. PMID:25878704

Exertional heat illness incidence and on-site medical team preparedness in warm weather

NASA Astrophysics Data System (ADS)

Hosokawa, Yuri; Adams, William M.; Belval, Luke N.; Davis, Robert J.; Huggins, Robert A.; Jardine, John F.; Katch, Rachel K.; Stearns, Rebecca L.; Casa, Douglas J.

2018-03-01

To investigate the influence of estimated wet bulb globe temperature (WBGT) and the International Institute of Race Medicine (IIRM) activity modification guidelines on the incidence of exertional heat stroke (EHS) and heat exhaustion (HEx) and the ability of an on-site medical team to treat those afflicted. Medical records of EHS and HEx patients over a 17-year period from the New Balance Falmouth Road Race were examined. Climatologic data from nearby weather stations were obtained to calculate WBGT with the Australian Bureau of Meteorology (WBGTA) and Liljegren (WBGTL) models. Incidence rate (IR) of EHS, HEx, and combined total of EHS and HEx (COM) were calculated, and linear regression analyses were performed to assess the relationship between IR and WBGTA or WBGTL. One-way ANOVA was performed to compare differences in EHS, HEx, and COM incidence to four alert levels in the IIRM guidelines. Incidence of EHS, HEx, and COM was 2.12, 0.98, and 3.10 cases per 1000 finishers. WBGTA explained 48, 4, and 46% of the variance in EHS, HEx, and COM IR; WBGTL explained 63, 13, and 69% of the variance in EHS, HEx, and COM IR. Main effect of WBGTA and WBGTL on the alert levels were observed in EHS and COM IR (p < 0.05). The cumulative number of EHS patients treated did not exceed the number of cold water immersion tubs available to treat them. EHS IR increased as WBGT and IIRM alert level increased, indicating the need for appropriate risk mitigation strategies and on-site medical treatment.

Exertional heat illness incidence and on-site medical team preparedness in warm weather.

PubMed

Hosokawa, Yuri; Adams, William M; Belval, Luke N; Davis, Robert J; Huggins, Robert A; Jardine, John F; Katch, Rachel K; Stearns, Rebecca L; Casa, Douglas J

2018-03-29

To investigate the influence of estimated wet bulb globe temperature (WBGT) and the International Institute of Race Medicine (IIRM) activity modification guidelines on the incidence of exertional heat stroke (EHS) and heat exhaustion (HEx) and the ability of an on-site medical team to treat those afflicted. Medical records of EHS and HEx patients over a 17-year period from the New Balance Falmouth Road Race were examined. Climatologic data from nearby weather stations were obtained to calculate WBGT with the Australian Bureau of Meteorology (WBGT A ) and Liljegren (WBGT L ) models. Incidence rate (IR) of EHS, HEx, and combined total of EHS and HEx (COM) were calculated, and linear regression analyses were performed to assess the relationship between IR and WBGT A or WBGT L . One-way ANOVA was performed to compare differences in EHS, HEx, and COM incidence to four alert levels in the IIRM guidelines. Incidence of EHS, HEx, and COM was 2.12, 0.98, and 3.10 cases per 1000 finishers. WBGT A explained 48, 4, and 46% of the variance in EHS, HEx, and COM IR; WBGT L explained 63, 13, and 69% of the variance in EHS, HEx, and COM IR. Main effect of WBGT A and WBGT L on the alert levels were observed in EHS and COM IR (p < 0.05). The cumulative number of EHS patients treated did not exceed the number of cold water immersion tubs available to treat them. EHS IR increased as WBGT and IIRM alert level increased, indicating the need for appropriate risk mitigation strategies and on-site medical treatment.

Modelling uncertainty in incompressible flow simulation using Galerkin based generalized ANOVA

NASA Astrophysics Data System (ADS)

Chakraborty, Souvik; Chowdhury, Rajib

2016-11-01

This paper presents a new algorithm, referred to here as Galerkin based generalized analysis of variance decomposition (GG-ANOVA) for modelling input uncertainties and its propagation in incompressible fluid flow. The proposed approach utilizes ANOVA to represent the unknown stochastic response. Further, the unknown component functions of ANOVA are represented using the generalized polynomial chaos expansion (PCE). The resulting functional form obtained by coupling the ANOVA and PCE is substituted into the stochastic Navier-Stokes equation (NSE) and Galerkin projection is employed to decompose it into a set of coupled deterministic 'Navier-Stokes alike' equations. Temporal discretization of the set of coupled deterministic equations is performed by employing Adams-Bashforth scheme for convective term and Crank-Nicolson scheme for diffusion term. Spatial discretization is performed by employing finite difference scheme. Implementation of the proposed approach has been illustrated by two examples. In the first example, a stochastic ordinary differential equation has been considered. This example illustrates the performance of proposed approach with change in nature of random variable. Furthermore, convergence characteristics of GG-ANOVA has also been demonstrated. The second example investigates flow through a micro channel. Two case studies, namely the stochastic Kelvin-Helmholtz instability and stochastic vortex dipole, have been investigated. For all the problems results obtained using GG-ANOVA are in excellent agreement with benchmark solutions.

Characterization and cytotoxicity of ions released from stainless steel and nickel-titanium orthodontic alloys.

PubMed

Eliades, Theodore; Pratsinis, Harris; Kletsas, Dimitris; Eliades, George; Makou, Margarita

2004-01-01

The purpose of this study was to qualitatively and quantitatively characterize the substances released from orthodontic brackets and nickel-titanium wires and to comparatively assess the cytotoxicity of the ions released from these orthodontic alloys. Two full sets of stainless steel brackets of 20 brackets each (weight 2.1 g) and 2 groups of 0.018 x 0.025 Ni-Ti archwires of 10 wires each (weight 2.0 g) were immersed in 0.9% saline solution for a month. The immersion media were analyzed with inductively coupled plasma-atomic emission spectroscopy (ICP-AES), and the ionic content was statistically analyzed with 1-way analysis of variance (ANOVA). Human periodontal ligament fibroblasts and gingival fibroblasts were exposed to various concentrations of the 2 immersion media; nickel chloride was used as a positive control for comparison purposes. The cytotoxic or cytostatic activity of the media was investigated with the MTT and the DNA synthesis assays. The results of the cytotoxicity assay were analyzed with 2-way ANOVA and the Tukey test with solution and concentration variants as discriminating variables (alpha=0.05). The results indicated no ionic release for the nickel-titanium alloy aging solution, whereas measurable nickel and traces of chromium were found in the stainless steel bracket-aging medium. Concentrations of the nickel chloride solution greater then 2 mM were found to reduce by more than 50% the viability and DNA synthesis of fibroblasts; however, neither orthodontic materials-derived media had any effect on the survival and DNA synthesis of either cells.

Three-dimensional quantification of pretorqued nickel-titanium wires in edgewise and prescription brackets.

PubMed

Mittal, Nitika; Xia, Zeyang; Chen, Jie; Stewart, Kelton T; Liu, Sean Shih-Yao

2013-05-01

To quantify the three-dimensional moments and forces produced by pretorqued nickel-titanium (NiTi) rectangular archwires fully engaged in 0.018- and 0.022-inch slots of central incisor and molar edgewise and prescription brackets. Ten identical acrylic dental models with retroclined maxillary incisors were fabricated for bonding with various bracket-wire combinations. Edgewise, Roth, and MBT brackets with 0.018- and 0.022-inch slots were bonded in a simulated 2 × 4 clinical scenario. The left central incisor and molar were sectioned and attached to load cells. Correspondingly sized straight and pretorqued NiTi archwires were ligated to the brackets using 0.010-inch ligatures. Each load cell simultaneously measured three force (Fx, Fy, Fz) and three moment (Mx, My, Mz) components. The faciolingual, mesiodistal, and inciso-occluso/apical axes of the teeth corresponded to the x, y, and z axes of the load cells, respectively. Each wire was removed and retested seven times. Three-way analysis of variance (ANOVA) examined the effects of wire type, wire size, and bracket type on the measured orthodontic load systems. Interactions among the three effects were examined and pair-wise comparisons between significant combinations were performed. The force and moment components on each tooth were quantified according to their local coordinate axes. The three-way ANOVA interaction terms were significant for all force and moment measurements (P < .05), except for Fy (P > .05). The pretorqued wire generates a significantly larger incisor facial crown torquing moment in the MBT prescription compared to Roth, edgewise, and the straight NiTi wire.

Effect of fluoride prophylactic agents on the mechanical properties of nickel-titanium-based orthodontic wires.

PubMed

Walker, Mary P; White, Richard J; Kula, Katherine S

2005-06-01

Titanium-based alloys have high corrosion resistance because they form a thin, stable oxide layer. Nevertheless, fluoride prophylactic agents can cause corrosion and associated discoloration of titanium-based orthodontic wires. The purpose of this investigation was to study the effects of fluoride prophylactic agents on the mechanical properties of nickel-titanium (Ni-Ti) and copper-nickel-titanium (Cu-Ni-Ti) orthodontic archwires. Preformed rectangular Ni-Ti and Cu-Ni-Ti wires were immersed in either an acidulated fluoride agent, a neutral fluoride agent, or distilled water (control) for 1.5 hours at 37 degrees C. After immersion, the loading and unloading elastic modulus and yield strength of the wires were measured with a 3-point bend test in a water bath at 37 degrees C, in accordance with the criteria in the current American National Standard/American Dental Association Specification No. 32 for Orthodontic Wires (2000). Scanning electron microscopy was also used to characterize the effects of the fluoride treatment on the wire topography. Unloading mechanical properties of Ni-Ti orthodontic wires were significantly decreased after exposure to both fluoride agents (1-way analysis of variance [ANOVA] and Dunnett's post hoc, alpha =.05); however, Cu-Ni-Ti wire mechanical properties were not significantly affected by either fluoride agent (1-way ANOVA, alpha =.05). Corrosive changes in surface topography were observed for both wires, with Cu-Ni-Ti appearing to be more severely affected. The results suggest that using topical fluoride agents with Ni-Ti wire could decrease the functional unloading mechanical properties of the wire and contribute to prolonged orthodontic treatment.

ANALYSES OF NEUROBEHAVIORAL SCREENING DATA: BENCHMARK DOSE ESTIMATION.

EPA Science Inventory

Analysis of neurotoxicological screening data such as those of the functional observational battery (FOB) traditionally relies on analysis of variance (ANOVA) with repeated measurements, followed by determination of a no-adverse-effect level (NOAEL). The US EPA has proposed the ...

Cognitive Reserve as a Protective Factor in Older HIV-Positive Patients at Risk for Cognitive Decline

PubMed Central

Foley, Jessica M.; Ettenhofer, Mark L.; Kim, Michelle S.; Behdin, Nina; Castellon, Steven A.; Hinkin, Charles H.

2013-01-01

The present study examined the impact of cognitive reserve in maintaining intact neuropsychological (NP) function among older HIV-positive individuals, a uniquely at-risk subgroup. Participants included 129 individuals classified by HIV serostatus, age group, and NP impairment. A three-way analysis of variance (ANOVA) followed by a series of within-group ANOVA and multiple regression analyses were conducted to investigate the pattern of cognitive reserve (vs. other protective) influence among groups with varying risks of NP impairment. Results indicated a significant age ×HIV status interaction, with older HIV-positive individuals demonstrating higher cognitive reserve than subgroups with less risk for NP compromise (younger age and/or HIV-negative). Results demonstrated higher cognitive reserve specific to NP-intact older HIV-positive individuals. Within this group, the interaction of younger age and higher cognitive reserve independently contributed to cognitive status when controlling for psychiatric, immunological, and psychosocial protective mechanisms, suggesting the importance of cognitive reserve beyond other protective mechanisms in maintaining optimal NP functioning in those individuals most at risk. Alongside younger age, factors contributing to cognitive reserve (i.e., education and estimated premorbid intelligence) may provide substantial benefit for older HIV-positive adults who are at high risk for NP compromise. PMID:22385375

Mental and Reproductive Health Correlates of Academic Performance among Debre Berhan University Female Students, Ethiopia: The Case of Premenstrual Dysphoric Disorder.

PubMed

Alemu, Sisay Mulugeta; Habtewold, Tesfa Dejenie; Haile, Yohannes Gebreegziabhere

2017-01-01

Globally 3 to 8% of reproductive age women are suffering from premenstrual dysphoric disorder (PMDD). Several mental and reproductive health-related factors cause low academic achievement during university education. However, limited data exist in Ethiopia. The aim of the study was to investigate mental and reproductive health correlates of academic performance. Institution based cross-sectional study was conducted with 667 Debre Berhan University female students from April to June 2015. Academic performance was the outcome variable. Mental and reproductive health characteristics were explanatory variables. Two-way analysis of variance (ANOVA) test of association was applied to examine group difference in academic performance. Among 529 students who participated, 49.3% reported mild premenstrual syndrome (PMS), 36.9% reported moderate/severe PMS, and 13.8% fulfilled PMDD diagnostic criteria. The ANOVA test of association revealed that there was no significant difference in academic performance between students with different level of PMS experience ( F -statistic = 0.08, p value = 0.93). Nevertheless, there was a significant difference in academic performance between students with different length of menses ( F -statistic = 5.15, p value = 0.006). There was no significant association between PMS experience and academic performance, but on the other hand, the length of menses significantly associated with academic performance.

Friction Forces during Sliding of Various Brackets for Malaligned Teeth: An In Vitro Study

PubMed Central

Crincoli, Vito; Di Bisceglie, Maria Beatrice; Balsamo, Antonio; Serpico, Vitaliano; Chiatante, Francesco; Pappalettere, Carmine; Boccaccio, Antonio

2013-01-01

Aims. To measure the friction force generated during sliding mechanics with conventional, self-ligating (Damon 3 mx, Smart Clip, and Time 3) and low-friction (Synergy) brackets using different archwire diameters and ligating systems in the presence of apical and buccal malalignments of the canine. Methods. An experimental setup reproducing the right buccal segment of the maxillary arch was designed to measure the friction force generated at the bracket/wire and wire/ligature interfaces of different brackets. A complete factorial plan was drawn up and a three-way analysis of variance (ANOVA) was carried out to investigate whether the following factors affect the values of friction force: (i) degree of malalignment, (ii) diameter of the orthodontic wire, and (iii) bracket/ligature combination. Tukey post hoc test was also conducted to evaluate any statistically significant differences between the bracket/ligature combinations analyzed. Results. ANOVA showed that all the above factors affect the friction force values. The friction force released during sliding mechanics with conventional brackets is about 5-6times higher than that released with the other investigated brackets. A quasilinear increase of the frictional forces was observed for increasing amounts of apical and buccal malalignments. Conclusion. The Synergy bracket with silicone ligature placed around the inner tie-wings appears to yield the best performance. PMID:23533364

Split-plot microarray experiments: issues of design, power and sample size.

PubMed

Tsai, Pi-Wen; Lee, Mei-Ling Ting

2005-01-01

This article focuses on microarray experiments with two or more factors in which treatment combinations of the factors corresponding to the samples paired together onto arrays are not completely random. A main effect of one (or more) factor(s) is confounded with arrays (the experimental blocks). This is called a split-plot microarray experiment. We utilise an analysis of variance (ANOVA) model to assess differentially expressed genes for between-array and within-array comparisons that are generic under a split-plot microarray experiment. Instead of standard t- or F-test statistics that rely on mean square errors of the ANOVA model, we use a robust method, referred to as 'a pooled percentile estimator', to identify genes that are differentially expressed across different treatment conditions. We illustrate the design and analysis of split-plot microarray experiments based on a case application described by Jin et al. A brief discussion of power and sample size for split-plot microarray experiments is also presented.

New model for prediction binary mixture of antihistamine decongestant using artificial neural networks and least squares support vector machine by spectrophotometry method

NASA Astrophysics Data System (ADS)

Mofavvaz, Shirin; Sohrabi, Mahmoud Reza; Nezamzadeh-Ejhieh, Alireza

2017-07-01

In the present study, artificial neural networks (ANNs) and least squares support vector machines (LS-SVM) as intelligent methods based on absorption spectra in the range of 230-300 nm have been used for determination of antihistamine decongestant contents. In the first step, one type of network (feed-forward back-propagation) from the artificial neural network with two different training algorithms, Levenberg-Marquardt (LM) and gradient descent with momentum and adaptive learning rate back-propagation (GDX) algorithm, were employed and their performance was evaluated. The performance of the LM algorithm was better than the GDX algorithm. In the second one, the radial basis network was utilized and results compared with the previous network. In the last one, the other intelligent method named least squares support vector machine was proposed to construct the antihistamine decongestant prediction model and the results were compared with two of the aforementioned networks. The values of the statistical parameters mean square error (MSE), Regression coefficient (R2), correlation coefficient (r) and also mean recovery (%), relative standard deviation (RSD) used for selecting the best model between these methods. Moreover, the proposed methods were compared to the high- performance liquid chromatography (HPLC) as a reference method. One way analysis of variance (ANOVA) test at the 95% confidence level applied to the comparison results of suggested and reference methods that there were no significant differences between them.

Understanding Non-Suicidal Self-Injury: Perceptions of School Counselors

ERIC Educational Resources Information Center

Simpson, Chris; Armstrong, Stephen A.; Couch, Lisa; Bore, Samuel K.

2010-01-01

This national exploratory study examined the perceptions of secondary school counselors' (n = 81) understanding of non-suicidal self-injury (NSSI). Two one-way ANOVAs revealed no statistically significant differences between middle and high school counselors on their perceptions of the prevalence of NSSI. Descriptive analyses revealed that a…

Academic Motivations of Pre-Service English Language Teachers

ERIC Educational Resources Information Center

Ariogul, Sibel

2009-01-01

This study examines the academic motivation, in a Turkish context, of Turkish pre-service English teachers to contribute field research. Students (n=287) completed the Academic Motivation Scale (AMS) and a demographic questionnaire. Data were analyzed using descriptive statistics, a one-way ANOVA, independent sample t-test, and Pearson product…

Targeting L-Selectin to Improve Neurologic and Urologic Function After Spinal Cord Injury

DTIC Science & Technology

2013-10-01

locomotor recovery. When cystometry was performed at the end of the study, 29/34 (~85%) of mice exhibited partial or complete voluntary bladder...0.05). Following euthanasia , bladders were removed, weighed, and normalized to total bodyweight (Figure 11C). One-way ANOVA demonstrated no

Exploration of Problematic Internet Use and Loneliness among Distance Education Students

ERIC Educational Resources Information Center

Ozgur, Hasan; Demiralay, Tülay; Demiralay, Ilkay

2014-01-01

The current study investigated the relationship between problematic Internet use and levels of loneliness among 311 distance education students. "The Problematic Internet Use Scale" and "UCLA-Loneliness Scale III" were used to collect the data. Independentsamples t-test and one-way ANOVA were conducted to examine the…

Language Learning Strategy Use across Proficiency Levels

ERIC Educational Resources Information Center

Zarei, Abbas, Ali; Baharestani, Nooshin

2014-01-01

To investigate the use of language learning strategies (LLS) by Iranian EFL learners across proficiency levels, a total of 180 Iranian adult female EFL learners were selected and divided into three different proficiency level groups. To collect data, Oxford's (1990) Strategy Inventory for Language Learning (SILL) was used. One-way ANOVA procedures…

Fluorescence hyperspectral imaging technique for the foreign substance detection on fresh-cut lettuce

USDA-ARS?s Scientific Manuscript database

Nondestructive methods based on fluorescence hyperspectral imaging (HSI) techniques were developed in order to detect worms on fresh-cut lettuce. The optimal wavebands for detecting worms on fresh-cut lettuce were investigated using the one-way ANOVA analysis and correlation analysis. The worm detec...

Inferential Processing among Adequate and Struggling Adolescent Comprehenders and Relations to Reading Comprehension

PubMed Central

Barth, Amy E.; Barnes, Marcia; Francis, David J.; Vaughn, Sharon; York, Mary

2015-01-01

Separate mixed model analyses of variance (ANOVA) were conducted to examine the effect of textual distance on the accuracy and speed of text consistency judgments among adequate and struggling comprehenders across grades 6–12 (n = 1203). Multiple regressions examined whether accuracy in text consistency judgments uniquely accounted for variance in comprehension. Results suggest that there is considerable growth across the middle and high school years, particularly for adequate comprehenders in those text integration processes that maintain local coherence. Accuracy in text consistency judgments accounted for significant unique variance for passage-level, but not sentence-level comprehension, particularly for adequate comprehenders. PMID:26166946

Life expectancy evaluation and development of a replacement schedule for LED traffic signals.

DOT National Transportation Integrated Search

2011-03-01

This research details a field study of LED traffic signals in Missouri and develops a replacement schedule : based on key findings. Rates of degradation were statistically analyzed using Analysis of Variance : (ANOVA). Results of this research will p...

A comparative study on the effects of systemic manual acupuncture, periauricular electroacupuncture, and digital electroacupuncture to treat tinnitus: A randomized, paralleled, open-labeled exploratory trial.

PubMed

Kim, Bong Hyun; Kim, Kyuseok; Nam, Hae Jeong

2017-01-31

Many previous studies of electroacupuncture used combined therapy of electroacupuncture and systemic manual acupuncture, so it was uncertain which treatment was effective. This study evaluated and compared the effects of systemic manual acupuncture, periauricular electroacupuncture and distal electroacupuncture for treating patients with tinnitus. A randomized, parallel, open-labeled exploratory trial was conducted. Subjects aged 20-75 years who had suffered from idiopathic tinnitus for > 2 weeks were recruited from May 2013 to April 2014. The subjects were divided into three groups by systemic manual acupuncture group (MA), periauricular electroacupuncture group (PE), and distal electroacupuncture group (DE). The groups were selected by random drawing. Nine acupoints (TE 17, TE21, SI19, GB2, GB8, ST36, ST37, TE3 and TE9), two periauricular acupoints (TE17 and TE21), and four distal acupoints (TE3, TE9, ST36, and ST37) were selected. The treatment sessions were performed twice weekly for a total of eight sessions over 4 weeks. Outcomes were the tinnitus handicap inventory (THI) score and the loud and uncomfortable visual analogue scales (VAS). Demographic and clinical characteristics of all participants were compared between the groups upon admission using one-way analysis of variance (ANOVA). One-way ANOVA was used to evaluate the THI, VAS loud , and VAS uncomfortable scores. The least significant difference test was used as a post-hoc test. Thirty-nine subjects were eligible and their data were analyzed. No difference in THI and VAS loudness scores was observed in between groups. The VAS uncomfortable scores decreased significantly in MA and DE compared with those in PE. Within the group, all three treatments showed some effect on THI, VAS loudness scores and VAS uncomfortable scores after treatment except DE in THI. There was no statistically significant difference between systemic manual acupuncture, periauricular electroacupuncture and distal electroacupuncture in tinnitus. However, all three treatments had some effect on tinnitus within the group before and after treatment. Systemic manual acupuncture and distal electroacupuncture have some effect on VAS uncomfortable . KCT0001991 by CRIS (Clinical Research Information Service), 2016-8-1, retrospectively registered.

Influence of Etching Protocol and Silane Treatment with a Universal Adhesive on Lithium Disilicate Bond Strength.

PubMed

Kalavacharla, V K; Lawson, N C; Ramp, L C; Burgess, J O

2015-01-01

To measure the effects of hydrofluoric acid (HF) etching and silane prior to the application of a universal adhesive on the bond strength between lithium disilicate and a resin. Sixty blocks of lithium disilicate (e.max CAD, Ivoclar Vivadent) were sectioned into coupons and polished. Specimens were divided into six groups (n=10) based on surface pretreatments, as follows: 1) no treatment (control); 2) 5% HF etch for 20 seconds (5HF); 3) 9.5% HF etch for 60 seconds (9.5HF); 4) silane with no HF (S); 5) 5% HF for 20 seconds + silane (5HFS); and 6) 9.5% HF for 60 seconds + silane (9.5HFS). All etching was followed by rinsing, and all silane was applied in one coat for 20 seconds and then dried. The universal adhesive (Scotchbond Universal, 3M ESPE) was applied onto the pretreated ceramic surface, air thinned, and light cured for 10 seconds. A 1.5-mm-diameter plastic tube filled with Z100 composite (3M ESPE) was applied over the bonded ceramic surface and light cured for 20 seconds on all four sides. The specimens were thermocycled for 10,000 cycles (5°C-50°C/15 s dwell time). Specimens were loaded until failure using a universal testing machine at a crosshead speed of 1 mm/min. The peak failure load was used to calculate the shear bond strength. Scanning electron microscopy images were taken of representative e.max specimens from each group. A two-way analysis of variance (ANOVA) determined that there were significant differences between HF etching, silane treatment, and the interaction between HF and silane treatment (p<0.01). Silane treatment provided higher shear bond strength regardless of the use or concentration of the HF etchant. Individual one-way ANOVA and Tukey post hoc analyses were performed for each silane group. Shear bond strength values for each etch time were significantly different (p<0.01) and could be divided into significantly different groups based on silane treatment: no silane treatment: 0 HF < 5% HF < 9.5% HF; and RelyX silane treatment: 0 HF < 5% HF and 9.5% HF. Both HF and silane treatment significantly improved the bond strength between resin and lithium disilicate when used with a universal adhesive.

The influence of polishing techniques on pre-polymerized CAD\\CAM acrylic resin denture bases

PubMed Central

Alammari, Manal Rahma

2017-01-01

Background Lately, computer-aided design and computer-aided manufacturing (CAD/CAM) has broadly been successfully employed in dentistry. The CAD/CAM systems have recently become commercially available for fabrication of complete dentures, and are considered as an alternative technique to conventionally processed acrylic resin bases. However, they have not yet been fully investigated. Objective The purpose of this study was to inspect the effects of mechanical polishing and chemical polishing on the surface roughness (Ra) and contact angle (wettability) of heat-cured, auto-cured and CAD/CAM denture base acrylic resins. Methods This study was conducted at the Advanced Dental Research Laboratory Center of King Abdulaziz University from March to June 2017. Three denture base materials were selected: heat cure poly-methylmethacrylate resin, thermoplastic (polyamide resin) and (CAD\\CAM) denture base resin. Sixty specimens were prepared and divided into three groups, twenty in each. Each group was divided according to the polishing techniques into (Mech P) and (Chem P), ten specimens in each; surface roughness and wettability were investigated. Data were analyzed by SPSS version 22, using one-way ANOVA and Pearson coefficient. Results One-way analysis of variance (ANOVA) and post hoc tests were used for comparing the surface roughness values between three groups which revealed a statistical significant difference between them (p1<0.001). Heat-cured denture base material of (Group I) in both methods, showed the highest mean surface roughness value (2.44±0.07, 2.72±0.09, Mech P and Chem P respectively); while CAD\\CAM denture base material (group III) showed the least mean values (1.08±0.23, 1.39±0.31, Mech P and Chem P respectively). CAD/CAM showed the least contact angle in both polishing methods, which were statistically significant at 5% level (p=0.034 and p<0.001). Conclusion Mechanical polishing produced lower surface roughness of CAD\\CAM denture base resin with superior smooth surface compared to chemical polishing. Mechanical polishing is considered the best effective polishing technique. CAD/CAM denture base material should be considered as the material of choice for complete denture construction in the near future, especially for older dental patients with changed salivary functions, because of its wettability. PMID:29238483

The influence of polishing techniques on pre-polymerized CAD\\CAM acrylic resin denture bases.

PubMed

Alammari, Manal Rahma

2017-10-01

Lately, computer-aided design and computer-aided manufacturing (CAD/CAM) has broadly been successfully employed in dentistry. The CAD/CAM systems have recently become commercially available for fabrication of complete dentures, and are considered as an alternative technique to conventionally processed acrylic resin bases. However, they have not yet been fully investigated. The purpose of this study was to inspect the effects of mechanical polishing and chemical polishing on the surface roughness (Ra) and contact angle (wettability) of heat-cured, auto-cured and CAD/CAM denture base acrylic resins. This study was conducted at the Advanced Dental Research Laboratory Center of King Abdulaziz University from March to June 2017. Three denture base materials were selected: heat cure poly-methylmethacrylate resin, thermoplastic (polyamide resin) and (CAD\\CAM) denture base resin. Sixty specimens were prepared and divided into three groups, twenty in each. Each group was divided according to the polishing techniques into (Mech P) and (Chem P), ten specimens in each; surface roughness and wettability were investigated. Data were analyzed by SPSS version 22, using one-way ANOVA and Pearson coefficient. One-way analysis of variance (ANOVA) and post hoc tests were used for comparing the surface roughness values between three groups which revealed a statistical significant difference between them (p 1 <0.001). Heat-cured denture base material of (Group I) in both methods, showed the highest mean surface roughness value (2.44±0.07, 2.72±0.09, Mech P and Chem P respectively); while CAD\\CAM denture base material (group III) showed the least mean values (1.08±0.23, 1.39±0.31, Mech P and Chem P respectively). CAD/CAM showed the least contact angle in both polishing methods, which were statistically significant at 5% level (p=0.034 and p<0.001). Mechanical polishing produced lower surface roughness of CAD\\CAM denture base resin with superior smooth surface compared to chemical polishing. Mechanical polishing is considered the best effective polishing technique. CAD/CAM denture base material should be considered as the material of choice for complete denture construction in the near future, especially for older dental patients with changed salivary functions, because of its wettability.

Estimating an Effect Size in One-Way Multivariate Analysis of Variance (MANOVA)

ERIC Educational Resources Information Center

Steyn, H. S., Jr.; Ellis, S. M.

2009-01-01

When two or more univariate population means are compared, the proportion of variation in the dependent variable accounted for by population group membership is eta-squared. This effect size can be generalized by using multivariate measures of association, based on the multivariate analysis of variance (MANOVA) statistics, to establish whether…

Beverage consumption in low income, "milk-friendly" families.

PubMed

Glanville, N Theresa; McIntyre, Lynn

2009-01-01

Beverage consumption by poor, lone mother-led, "milk-friendly" families living in Atlantic Canada was characterized over a one-month income cycle. Beverage intake and food security status were assessed weekly, using a 24-hour dietary recall and the Cornell-Radimer food insecurity questionnaire. Families were classified as "milk friendly" if total consumption of milk was 720 mL on a single day during the month. Beverage intake was assessed using t-tests, analysis of variance (ANOVA), repeated measures ANOVA with post hoc comparisons, and chi-square analysis. Milk consumption by milk-friendly families (76; total sample, 129) was highest at the time of the month when they had the most money to spend. During all time intervals, mothers consumed the least amount of milk and children aged one to three years consumed the most. Mothers consumed carbonated beverages disproportionately, while children of all ages consumed more fruit juice/drink. Mothers' coffee consumption was profoundly increased when either they or their children were hungry. The quality of beverage intake by members of low-income households fluctuates in accordance with financial resources available to purchase foods. Mothers' beverage intake is compromised by the degree of food insecurity the family experiences.

Comparison of central corneal thickness measurements using ultrasound pachymetry, ultrasound biomicroscopy, and the Artemis-2 VHF scanner in normal eyes

PubMed Central

Al-Farhan, Haya M; Al-Otaibi, Wafa’a Majed

2012-01-01

Purpose To compare the precision of central corneal thickness (CCT) measurements taken with the handheld ultrasound pachymeter (USP), ultrasound biomicroscopy (UBM), and the Artemis-2 very high frequency ultrasound scanner (VHFUS) on normal subjects. Design Prospective study. Methods One eye from each of 61 normal subjects was randomly selected for this study. The measurements of the CCT were taken with the USP, VHFUS, and UBM. Results were compared statistically using repeated-measures analysis of variance (ANOVA), Pearson’s correlation coefficient, and limits of agreement. Results The average CCT (± standard deviation) was 530.1 ± 30.5 μm, 554.9 ± 31.7 μm, and 559.5 ± 30.7 μm for UBM, VHFUS, and USP respectively. The intraobserver repeatability analyses of variance are not significant for USP, UBM, and VHFUS. P-values were 0.17, 0.19, and 0.37 respectively. Repeated-measures ANOVA showed a significant difference between the three different methods of measuring CCT (P = 0.0001). The ANOVA test revealed no statistically significant difference between USP and VHFUS (P > 0.05), yet statistical significant differences with UBM versus USP and UBM versus VHFUS (P < 0.001). There were high correlations between the three instruments (P < 0.0001). The mean differences (and upper/lower limits of agreement) for CCT measurements were 29.4 ± 14.3 (2.7/56), 4.6 ± 8.6 (−14.7/23.8), and −24.8 ± 13.1 (−50.4/0.8) for USP versus UBM, USP versus VHFUS, and UBM versus VHFUS, respectively. Conclusion The UBM produces CCT measurements that vary significantly from those returned by the USP and the VHFUS, suggesting that the UBM may not be used interchangeably with either equipment for monitoring the CCT in the clinical setting. PMID:22848145

Dual and self-curing potential of self-adhesive resin cements as thin films.

PubMed

Moraes, R R; Boscato, N; Jardim, P S; Schneider, L F J

2011-01-01

In this study, the dual- and self-curing potential of self-adhesive resin cements (SARCs) as thin, clinically-relevant cement films was investigated. The SARCs tested were: BisCem (BSC; Bisco), Maxcem Elite (MXE; Kerr), RelyX Unicem clicker (UNI; 3M ESPE), seT capsule (SET; SDI), and SmartCem 2 (SC2; Dentsply Caulk). The conventional cement RelyX ARC (3M ESPE) was tested as a reference. The degree of conversion (DC) as a function of time was evaluated by real-time Fourier transform infrared spectroscopy with an attenuated total reflectance (ATR) device. The cements were either photoactivated for 40 seconds (dual-cure mode) or not photoactivated (self-cure mode). The cement film thickness was 50 ± 10 μm. The DC (%) was evaluated 1, 5, 10, 15, 20, 25, and 30 minutes after placing the cement on the ATR cell. Data for DC as a function of time were analyzed by two-way repeated measures analysis of variance (ANOVA). DC values at 30 minutes for the self- and dual-cure modes were submitted to one-way ANOVA. Post hoc comparisons were performed using the Student-Newman-Keuls test (p<0.05). The rate and the extent of conversion were lower for the SARCs compared with the conventional cement. Means ± standard deviations (SD) for the dual-cure mode at 30 minutes were: 75 ± 5 (ARC)a, 73 ± 8 (SET)a, 61 ± 4 (MXE)b, 51 ± 9 (BSC)c, 51 ± 4 (UNI)c, and 48 ± 3 (SC2)c, while in the self-cure mode means and SD were 62 ± 6 (ARC)a, 54 ± 3 (MXE)b, 40 ± 6 (SC2)c, 35 ± 2 (UNI)c, 35 ± 3 (SET)c, and 11 ± 3 (BSC)d. The DC for the dual-cure mode was generally higher than the self-cure, irrespective of the time. Discrepancies in DC between the dual- and self-cure modes from 11% to 79% were observed. In conclusion, SARCs may present slower rate of polymerization and lower final DC than conventional resin cements, in either the dual- or self-cure mode.

Clinical marginal and internal adaptation of CAD/CAM milling, laser sintering, and cast metal ceramic crowns.

PubMed

Tamac, Ece; Toksavul, Suna; Toman, Muhittin

2014-10-01

Metal ceramic crowns are widely used in clinical practice, but comparisons of the clinical adaptation of restorations made with different processing techniques are lacking. The purpose of this study was to compare the clinical marginal and internal adaptation of metal ceramic crowns fabricated with 3 different techniques: computer-aided design and computer-aided manufacturing (CAD/CAM) milling (CCM), direct metal laser sintering (DMLS), and traditional casting (TC). Twenty CCM, 20 DMLS, and 20 TC metal ceramic crowns were fabricated for 42 patients. Before luting the crowns, silicone replicas were obtained to measure marginal gap and internal adaptation that was evaluated at 3 regions: axial wall, axio-occlusal angle, and occlusal surface. Measurements were made with a reflected light binocular stereomicroscope at 20× magnification and analyzed with 1-way analysis of variance (ANOVA) and the Bonferroni post hoc test (α=.05). The mean marginal gap values were 86.64 μm for CCM, 96.23 μm for DMLS, and 75.92 μm for TC. The means at the axial wall region were 117.5 μm for the CCM group, 139.02 μm for the DMLS group, and 121.38 μm for the TC group. One-way ANOVA revealed no statistically significant differences among the groups for measurements at the marginal gap (P=.082) and the axial wall region (P=.114). The means at the axio-occlusal region were 142.1 μm for CCM, 188.12 μm for DMLS, and 140.63 μm for TC, and those at the occlusal surface region were 265.73 μm for CCM, 290.39 μm for DMLS, and 201.09 μm for TC. The mean values of group DMLS were significantly higher at the axio-occlusal region and the occlusal surface region than those of other groups (P<.05). CCM, DMLS and TC metal ceramic crowns performed similarly in terms of clinical marginal and axial wall adaptation. The cement film thickness at the occlusal region and axio-occlusal region were higher for DMLS crowns. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

A Passion for Service? Motivations for Volunteerism among First-Year College Students

ERIC Educational Resources Information Center

Stroup, John T.; Dodson, Kyle; Elias, Kaitlyn; Gewirtzman, Andrea

2015-01-01

This study addressed the links between first-year college students' motivations to volunteer, gender, and past volunteering practices. We surveyed 149 first-year students using items from the Volunteer Functions Inventory (Clary et al., 1998). The results of a series of one-way ANOVAs determined significant differences in motivations when…

Stressors and Stressor Response Levels of Hong Kong Primary School Music Teachers

ERIC Educational Resources Information Center

Wong, Marina Wai-yee; Chik, Maria Pik-yuk; Chan, Edmund Sze Shing

2018-01-01

Responses from 309 randomly sampled Hong Kong primary school music teachers to the shortened version of the Chinese Teacher Stress Questionnaire were subjected to a descriptive percentage analysis, one-way ANOVA and independent t test. Obtained results identify five key stressors: "changing education policy of the government";…

Video Lecture Watching Behaviors of Learners in Online Courses

ERIC Educational Resources Information Center

Ozan, Ozlem; Ozarslan, Yasin

2016-01-01

This paper examines learners' behaviors while watching online video lectures to understand learner preferences. 2927 students' 18,144 video events across 13 courses on Sakai CLE LMS, which were integrated with Kaltura Video Platform and Google Analytics, were analyzed. For the analysis of the quantitative data, one-way ANOVA, Chi-square test of…

Teacher Attitudes on Including Students with Behavior Intervention Plans in a High-School Inclusive Classroom

ERIC Educational Resources Information Center

Tucker, Thurman D.

2017-01-01

This research examined attitudes to determine factors influencing teachers' attitudes toward including students with behavior intervention plans in inclusive high-school classrooms. For Research Question 1 one-way ANOVAs analyzed quantitative data with no significant differences found and qualitative data discovered common patterns that BIPs are…

Three-Dimensional Scaffold from Decellularized Human Gingiva for Cell Cultures: Glycoconjugates and Cell Behavior

PubMed Central

Naderi, Somayeh; Khayat Zadeh, Jina; Mahdavi Shahri, Nasser; Nejad Shahrokh Abady, Khadijeh; Cheravi, Mojtaba; Baharara, Javad; Banihashem Rad, Seyed Ali; Bahrami, Ahmad Reza

2013-01-01

Objective: We studied both the presence of some carbohydrate compounds in a threedimensional (3D) matrix harvested from human gingiva and the cell behavior in this matrix. Materials and Methods: In this experimental research, in order to prepare 3D scaffolds, human palatal gingival biopsies were harvested and physically decellularized by freezethawing and sodium dodecyl sulfate (SDS). The scaffolds were placed within the rings of blastema tissues obtained from a pinna rabbit, in vitro. We evaluated the presence of glycoconjugatesand cellular behavior according to histological, histochemical and spectrophotometry techniques at one, two and three weeks after culture. One-way analysis of variance (ANOVA)comparedthe groups. Results: Extracellular matrix (ECM) remained after decellularization of tissue with 1% SDS. Glycoconjugate contents decreased meaningfully at a higher SDS concentration (p<0.0001). After culture of the ECM scaffold with blastema, we observed increased staining of alcian blue, periodic acid-Schiff (PAS) and toluidine blue in the scaffold and a number of other migrant cells which was caused by cell penetrationinto the scaffold. Spectrophotometry results showed an increase in glycosaminoglycans (GAGs) of the decellularized scaffolds at three weeks after culture. Conclusion: The present study has shown that a scaffold generated from palatal gingival tissue ECM is a suitable substrate for blastema cell migration and activity.This scaffold maypotentially be useful as a biological scaffold in tissue engineering applications. PMID:23862119

Apical extrusion of debris by supplementary files used for retreatment: An ex vivo comparative study

PubMed Central

Pawar, Ajinkya M.; Pawar, Mansing; Metzger, Zvi; Thakur, Bhagyashree

2016-01-01

Aim: This study evaluated whether using supplementary files for removing root canal filling residues after ProTaper Universal Retreatment files (RFs) increased the debris extrusion apically. Materials and Methods: Eighty mandibular premolars with single root and canal were instrumented with ProTaper Universal rotary system (SX-F3) and obturated. The samples were divided randomly into four groups (n = 20). Group 1 served as a control; only ProTaper Universal RFs D1–D3 were used, and the extruded debris was weighed. Groups 2, 3, and 4 were the experimental groups, receiving a twofold retreatment protocol: Removal of the bulk, followed by the use of supplementary files. The bulk was removed by RFs, followed by the use of ProTaper NEXT (PTN), WaveOne (WO), and Self-Adjusting File (SAF) for removal of the remaining root filling residues. Debris extruded apically were weighed and compared to the control group. Statistical analysis was performed using one-way analysis of variance (ANOVA) and post hoc Tukey's test. Results: All the three experimental groups presented significant difference (P < .01). The post hoc Tukey's test confirmed that Group 4 (SAF) exhibited significantly less (P < .01) debris extrusion between the three groups tested. Conclusion: SAF results in less extrusion of debris when used as supplementary file to remove root-filling residues, compared to WO and PTN. PMID:27099416

Impact of peer pressure on accuracy of reporting vital signs: An interprofessional comparison between nursing and medical students.

PubMed

Kaba, Alyshah; Beran, Tanya N

2016-01-01

The hierarchical relationship between nursing and medicine has long been known, yet its direct influence on procedural tasks has yet to be considered. Drawing on the theory of conformity from social psychology, we suggest that nursing students are likely to report incorrect information in response to subtle social pressures imposed by medical students. Second-year medical and third-year nursing students took vital signs readings from a patient simulator. In a simulation exercise, three actors, posing as medical students, and one nursing student participant all took a total of three rounds of vital signs on a high-fidelity patient simulator. In the first two rounds the three actors individually stated the same correct vital signs values, and on the third round the three actors individually stated the same incorrect vital sign values. This same procedure was repeated with actors posing as nursing students, and one medical student. A two-way analysis of variance (ANOVA) revealed that nursing student participants (M = 2.84; SD = 1.24) reported a higher number of incorrect vital signs than did medical student participants (M = 2.13; SD = 1.07), F (1,100) = 5.51, p = 0.021 (Cohen's d = 0.61). The study indicated that social pressure may prevent nursing students from questioning incorrect information within interprofessional environments, potentially affecting quality of care.

The effect of various primers on shear bond strength of zirconia ceramic and resin composite.

PubMed

Sanohkan, Sasiwimol; Kukiattrakoon, Boonlert; Larpboonphol, Narongrit; Sae-Yib, Taewalit; Jampa, Thibet; Manoppan, Satawat

2013-11-01

To determine the in vitro shear bond strengths (SBS) of zirconia ceramic to resin composite after various primer treatments. Forty zirconia ceramic (Zeno, Wieland Dental) specimens (10 mm in diameter and 2 mm thick) were prepared, sandblasted with 50 μm alumina, and divided into four groups (n = 10). Three experimental groups were surface treated with three primers; CP (RelyX Ceramic Primer, 3M ESPE), AP (Alloy Primer, Kuraray Medical), and MP (Monobond Plus, Ivoclar Vivadent AG). One group was not treated and served as the control. All specimens were bonded to a resin composite (Filtek Supreme XT, 3M ESPE) cylinder with an adhesive system (Adper Scotchbond Multi-Purpose Plus Adhesive, 3M ESPE) and then stored in 100% humidity at 37°C for 24 h before SBS testing in a universal testing machine. Mean SBS (MPa) were analyzed with one-way analysis of variance (ANOVA) and the Tukey's Honestly Significant Difference (HSD) test (α = 0.05). Group AP yielded the highest mean and standard deviation (SD) value of SBS (16.8 ± 2.5 MPa) and Group C presented the lowest mean and SD value (15.4 ± 1.6 MPa). The SBS did not differ significantly among the groups (P = 0.079). Within the limitations of this study, the SBS values between zirconia ceramic to resin composite using various primers and untreated surface were not significantly different.

Circular RNA 0068669 as a new biomarker for hepatocellular carcinoma metastasis.

PubMed

Yao, Ting; Chen, Qingqing; Shao, Zhouwei; Song, Zhihua; Fu, Liyun; Xiao, Bingxiu

2018-05-21

Circular RNAs (circRNAs) play important roles in disease occurrence. However, the roles of circRNAs in the diagnosis of hepatocellular carcinoma (HCC) are largely unknown. The aim of this study is to investigate the clinical diagnostic values of hsa_circ_0068669 (Alias: hsa_circ_103561), one of the representative HCC-associated circRNAs. Hsa_circ_0068669 expression levels in HCC tissues, HCC cell lines, and chronic hepatitis tissues were detected by real-time quantitative reverse transcription-polymerase chain reaction. Its expression levels between HCC tissues and adjacent non-tumorous tissues were analyzed using paired t test. Independent t test and one-way analysis of variance (ANOVA) were performed to analyze the relationships between hsa_circ_0068669 expression levels and clinicopathological factors of patients with HCC. A receiver operating characteristic (ROC) curve was established to estimate the value of hsa_circ_0068669 as a biomarker in HCC. Hsa_circ_0068669 expression was significantly downregulated in HCC tissues and HCC cell lines compared with paired non-tumorous tissues and normal hepatic cell line, respectively. Moreover, hsa_circ_0068669 expression in HCC tissues was decreased comparing with chronic hepatitis tissues. Furthermore, hsa_circ_0068669 expression was correlated with microvascular invasion and TNM stages. Our findings indicate that hsa_circ_0068669 might be served as a novel potential biomarker for HCC metastasis. © 2018 Wiley Periodicals, Inc.

The publication gender gap in US academic surgery.

PubMed

Mueller, Claudia; Wright, Robert; Girod, Sabine

2017-02-14

Terms such as "glass ceiling" and "sticky floor" are still commonly used to describe women's role in academic surgery. Despite continued efforts to address disparities between men and women in the field, gender inequalities persist. In this investigation we highlight gender differences in published surgical literature by both quantity and impact. Websites for departments of surgery of three academic centers were reviewed to assess the bibliometrics of publications by gender over a two-week period. A one-way ANOVA showed a significantly higher H-index for men than women (p > .05). Further, one-way ANOVA showed significantly more articles published by men than women (p = .019). These differences are most dramatic at the rank of associate professor where the H-index for men is three times that of the women. The rank of full professor showed men had double the number of articles published. These findings align with the previous research that shows a disparity between males and females as they climb the academic ladder. Conducting and publishing research is a vital part of advancement in academic medicine. This study suggests that publication productivity may be a factor that hinders women from advancing within surgery compared to men. Continuing to explore and identify reasons for this gender difference in academic surgery may highlight ways to address the imbalance.

Influence of Drilling Speed on Stability of Tapered Dental Implants: An Ex Vivo Experimental Study.

PubMed

Almeida, Karen P; Delgado-Ruiz, Rafael; Carneiro, Leandro G; Leiva, Alberto Bordonaba; Calvo-Guirado, Jose Luis; Gómez-Moreno, Gerardo; Malmström, Hans; Romanos, Georgios E

2016-01-01

The aim of this study was to evaluate whether the drilling speed used during implant site preparation influences primary stability. Eighty tapered designed implants (3.8 × 10 mm) were inserted following osteotomies created in solid rigid polyurethane foam (simulating bone type II) and cellular rigid polyurethane foam (simulating bone type IV). Half were prepared using drilling speeds of 800 rpm (low speed), and the other half were prepared using speeds of 1,500 rpm (high speed). Following insertion, implant primary stability was measured using Periotest and Osstell (resonance frequency analysis [RFA]) devices. Two-way analysis of variance (ANOVA) used for this study found that the drilling speed used to create the osteotomies appeared to have no significant impact on primary stability. The bone quality and not the osteotomy drilling speed seems to influence the implant primary stability.

[Effects of rapamycin on amyloid β-protein induced impairments of working memory and synaptic plasticity in rats].

PubMed

Hao, Ming; Tong, Jia-qing; Zhang, Jun; Wu, Mei-na; Qi, Jin-shun

2016-01-01

The present study investigated the effects of rapamycin on Aβ1-42-induced deficits in working memory and synaptic plasticity. After bilateral hippocampal injection of Aβ1-42 and rapamycinin rats, spontaneous alternation in Y-maze and in vivo hippocampal long-term potentiation (LTP) of rats were recorded. All data were analized by two-way repeated measures analysis of variance (ANOVA). (Hippocampal injection of Aβ1-42 alone impaired working memory of rats; (2) Rapamycin did not affect working memory of rats, but alleviated Aβ1-42-induced working memory deficits, compared with Aβ1-42 alone group; (Aβ1-42 remarkably suppressed in vivo hippocampal LTP of fEPSPs in the CA1 region; (4) Pretreatment with rapamycin prevented Aβ1-42-induced suppression of LTP. These data indicates that rapamycin could protect against Aβ1-42-induced impairments in working memory and synaptic plasticity in rats.

Analysis of repeated measurement data in the clinical trials

PubMed Central

Singh, Vineeta; Rana, Rakesh Kumar; Singhal, Richa

2013-01-01

Statistics is an integral part of Clinical Trials. Elements of statistics span Clinical Trial design, data monitoring, analyses and reporting. A solid understanding of statistical concepts by clinicians improves the comprehension and the resulting quality of Clinical Trials. In biomedical research it has been seen that researcher frequently use t-test and ANOVA to compare means between the groups of interest irrespective of the nature of the data. In Clinical Trials we record the data on the patients more than two times. In such a situation using the standard ANOVA procedures is not appropriate as it does not consider dependencies between observations within subjects in the analysis. To deal with such types of study data Repeated Measure ANOVA should be used. In this article the application of One-way Repeated Measure ANOVA has been demonstrated by using the software SPSS (Statistical Package for Social Sciences) Version 15.0 on the data collected at four time points 0 day, 15th day, 30th day, and 45th day of multicentre clinical trial conducted on Pandu Roga (~Iron Deficiency Anemia) with an Ayurvedic formulation Dhatrilauha. PMID:23930038

INTRAOCULAR PRESSURE AND EXAMINATION FINDINGS IN THREE SPECIES OF CENTRAL AND SOUTH AMERICAN TREE FROGS (CRUZIOHYLA CRASPEDOPUS, CRUZIOHYLA CALCARIFER, AND ANOTHECA SPINOSA).

PubMed

Lewin, Andrew C; Hausmann, Jennifer C; Miller, Paul E

2017-09-01

The purpose of this prospective study was to describe intraocular pressure (IOP) and examination findings in three tree frog species (Cruziohyla craspedopus [fringe leaf frog], Cruziohyla calcarifer [splendid leaf frog], and Anotheca spinosa [spiny-headed or coronated tree frog]). Thirty-one C. craspedopus, four C. calcarifer, and five A. spinosa were weighed, sexed based on phenotype where possible, and examined using slit-lamp biomicroscopy and indirect ophthalmoscopy. IOP was measured using the TonoVet and TonoLab rebound tonometers while the frogs were held two ways (unrestrained, then restrained). Statistical differences were determined using one-way analysis of variance (ANOVA) and t-tests. Mean ± SD IOP (TonoVet and TonoLab, respectively) was 15.1 ± 2.5 mmHg and 15.6 ± 4.1 mmHg in C. craspedopus; 14.8 ± 1.5 mmHg and 18.8 ± 3.1 mmHg in C. calcarifer; and 9.1 ± 2.1 mmHg and 10.8 ± 1.4 mmHg in A. spinosa. There was no significant difference in IOP in C. craspedopus by eye (Right vs Left), tonometer, or restraint method. IOP in female C. craspedopus was 1-3 mm Hg higher than in males with both devices (P < 0.05). IOP was statistically significantly different between all species for the TonoLab and between Cruziohyla genus frogs and A. spinosa for the TonoVet (P < 0.05). There was no difference in IOP measurements between the TonoVet and TonoLab in C. craspedopus. IOP varied by gender in C. craspedopus and between species, but not by tonometer. Ocular abnormalities were minimal in this group of captive bred frogs.

The Supply Effectiveness of Cooperative Logistics.

DTIC Science & Technology

1979-06-01

comparisins need special attention. One- Wav ANOVA The critical item data were run on the computer using the subprogram One-Way (lo:422-425) to...thesis midi -proposal, LSSR 3-79B, Air Force Institute of Technology, Wright-Patterson AFB OH, February 1979. 6. Christenson, Linda. Supply Systems...Pricing Procedures." Unpublished thesis midi -proposal. LSSR 8-79B, Air Force Institute of Technology, Wright-Patterson AFB OH, February 1979. 28

Shear Bond Strengths and Morphological Evaluation of Filled and Unfilled Adhesive Interfaces to Enamel and Dentine

PubMed Central

Mortazavi, Vajihesadat; Fathi, Mohammadhosein; Ataei, Ebrahim; Khodaeian, Niloufar; Askari, Navid

2012-01-01

In this laboratory study shear bond strengths of three filled and one unfilled adhesive systems to enamel and dentine were compared. Forty-eight extracted intact noncarious human mandibular molars were randomly assigned to two groups of 24 one for bonding to enamel and the other for bonding to dentine. Buccal and lingual surfaces of each tooth were randomly assigned for application of each one of filled (Prime & Bond NT (PBNT), Optibond Solo Plus (OBSP), and Clearfil SE Bond (CSEB)) and unfilled (Single Bond (SB)) adhesive systems (n = 12). A universal resin composite was placed into the translucent plastic cylinders (3 mm in diameter and 2 mm in length) and seated against the enamel and dentine surfaces and polymerized for 40 seconds. Shear bond strength was determined using a universal testing machine, and the results were statistically analyzed using two-way ANOVA, one-way ANOVA, t-test, and Tukey HSD post hoc test with a 5% level of significance.There were no statistically significant differences in bond strength between the adhesive systems in enamel, but CSEB and SB exhibited significantly higher and lower bond strength to dentine, respectively, than the other tested adhesive systems while there were no statistically significant differences between PBNT and OBSP. PMID:23209471

Students' perceptions of vertical and horizontal integration in a discipline-based dental school.

PubMed

Postma, T C; White, J G

2017-05-01

Integration is a key concern in discipline-based undergraduate dental curricula. Therefore, this study compared feedback on integration from students who participated in different instructional designs in a Comprehensive Patient Care course. The study was conducted at the University of Pretoria (2009-2011). Third-year cohorts (Cohorts A, B and C) participated in pre-clinical case-based learning, whilst fourth-year cohorts (Cohorts D and E) received didactic teaching in Comprehensive Patient Care. Cohorts A, D and E practised clinical Comprehensive Patient Care in a discipline-based clinic. Cohort B conducted their Comprehensive Patient Care patient examinations in a dedicated facility supervised by dedicated faculty responsible to teach integration. Students had to indicate on visual analogue scales whether the way they were taught at the school helped them to integrate knowledge from the same (horizontal integration) and preceding (vertical integration) year of study. The end-points of the scales were defined as 'definitely' and 'not at all'. Analysis of variance (ANOVA) was employed to measure the differences between cohorts according to the year of study. Third-year case-based learning cohorts rated the horizontal integration close to 80/100 and vertical integration ranging from 64 to 71/100. In year four, Cohort B rated vertical and horizontal integration 9-15% higher (ANOVA, P < 0.05) than Cohorts A and D. In year five, Cohort A rated vertical and horizontal integration 11-18% higher (ANOVA, P < 0.05) than Cohorts D and E. Pre-clinical case-based learning and Comprehensive Patient Care supervised by dedicated faculty were associated with more favourable perceptions about integration in the discipline-based undergraduate dental curriculum. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The association between Modic changes and pain during 1-year follow-up in patients with lumbar radicular pain.

PubMed

Schistad, Elina Iordanova; Espeland, Ansgar; Rygh, Lars Jørgen; Røe, Cecilie; Gjerstad, Johannes

2014-09-01

To examine whether Modic changes influence pain during a 1-year follow-up in patients with lumbar radicular pain. A total of 243 patients with lumbar radicular pain due to disc herniation were recruited from two hospitals in Norway and followed up at 6 weeks, 6 months, and 12 months. On baseline lumbar magnetic resonance images, two observers independently evaluated Modic changes (types I-III; craniocaudal size 0-3). Outcomes were sensory pain (McGill Pain Questionnaire), back and leg pain (visual analogue scale, VAS). Association between Modic type and outcomes was explored with a mixed model and then by two-way analysis of variance (ANOVA) at each time point with Modic and treatment groups (surgical, n = 126; nonsurgical, n = 117) as fixed factors, adjusted for disc degeneration, age, sex, smoking, and duration of radicular pain. Modic size was also analyzed using ANOVA. Pain scores had decreased significantly at 1-year follow-up. Modic type was significantly related to McGill sensory scores (mixed model: p = 0.014-0.026; ANOVA: p = 0.007 at 6 weeks), but not to VAS back pain or VAS leg pain scores. At 6 weeks, the mean McGill sensory score was higher in Modic I than in Modic II-III patients (p = 0.003) and in patients without Modic changes (p = 0.018). Modic size L1-S1 was not associated with pain outcomes. Patients with lumbar radicular pain have a substantial pain reduction during 1-year follow-up, but Modic type I changes may imply a slower initial decrease in sensory pain.

Cigarette smoking and alveolar bone in young adults: a study using digitized radiographs.

PubMed

Rosa, Guillermo M; Lucas, Gabriela Q; Lucas, Oscar N

2008-02-01

Evidence indicates that cigarette smoking is one of the most significant risk factors for periodontal diseases; however, there have been few radiographic prospective studies of alveolar bone in young populations. The purpose of this study was to evaluate the effect of smoking on alveolar bone in young adults. Eighty-one dental students (mean age: 20.5 years), considered not to have periodontitis according to clinical criteria, participated in this study. Forty-two subjects were smokers (mean consumption was 14.1 cigarettes/day for > or =2 years), and 39 subjects had never smoked. A parallel-arm prospective design was used. All subjects took part in a dental hygiene program (DHP) that included oral hygiene instructions, mechanical debridement, and polishing. The following clinical variables were measured before and after the DHP: plaque index (PI), gingival crevicular fluid (GCF) flow rate, gingival index (GI), probing depth, and clinical attachment level (CAL). Standardized posterior vertical bitewing radiographs were taken and digitized preexperimentally and on days 180, 365, and 545. The following analyses were performed: bone height measurement (BHM), computer-assisted densitometric image analysis (CADIA), and qualitative analysis of digital subtraction radiography (DSR). Repeated-measures multiple-way analysis of variance (ANOVA) was performed between the groups, and one-way ANOVA was performed within the groups. The mean PI and GI were significantly greater in the smokers (P <0.01). The mean GCF flow rate was significantly lower in the smokers (P <0.01). CAL and the number of sites with recession were significantly greater in the smokers (P <0.001). The BHM indicated a significantly lower mean alveolar bone height in the smokers (P <0.01). The smokers showed significantly lower CADIA values, which indicated a lower bone density on days 0 (P <0.05), 180, 365, and 545 (P <0.01). CADIA values decreased during the study in the smokers, with significant differences on day 545 (P <0.05). The smokers had a significantly higher mean percentage of sites that had decreased density, as assessed by DSR (P <0.001). In the smokers, the mean percentage of sites with decreased density, as assessed by DSR, had increased significantly by days 365 (P <0.05) and 545 (P <0.01). Smoking produces an adverse effect on clinical periodontal variables and alveolar bone height and density, acting as a potential risk factor for alveolar bone loss, even at an early age with low tobacco consumption. It is very important to inform young smokers about the risk of this habit in relation to periodontal health.

Burden among Family Caregivers of Dementia in the Oldest-Old: An Exploratory Study.

PubMed

Win, Khin Khin; Chong, Mei Sian; Ali, Noorhazlina; Chan, Mark; Lim, Wee Shiong

2017-01-01

With >85 years, the fastest growing age segment in developed countries, dementia in the oldest-old is projected to increase exponentially. Being older, caregivers of dementia in oldest-old (CDOO) may experience unique challenges compared with younger-age groups. Thus, we aim to explore demographic characteristics and burden pattern among CDOO. We studied 458 family caregiver-patient dyads attending an outpatient memory clinic. We classified patients into three age-groups: <75, 75-84, and ≥85 years. We measured caregiver burden using the Zarit Burden Interview (ZBI) 4-factor structure described by Cheah et al. (1). We compared care recipient characteristics, caregiver demographics, and ZBI total/factors scores between the three age-groups, and performed 2-way analysis of variance (ANOVA) to ascertain the effect of age-group by disease severity interaction. Oldest-old care recipients were more impaired in cognitive function and instrumental ADL; there was no difference in behavior and basic ADL. Compared with the other two age-groups, CDOO were older (mean age: 50.4 vs 55.5 vs 56.8 years, P  < 0.01), and overwhelmingly adult children (85.9%) as opposed to spouses (5.3%). CDOO also had higher ZBI total score, role strain, and personal strain (all P  < 0.05). However, there was no difference in worry about performance scores. 2-way ANOVA did not reveal significant age-group by disease severity interaction for ZBI total and factor scores, although distinctive differences were seen between role/personal strain with worry about performance in mild cognitive impairment and very mild dementia. Our study highlighted that CDOO were mainly older adult children who experienced significant role and personal strain independent of disease severity while caring for their family member with more impaired cognitive and physical function. These results pave the way for targeted interventions to address the unique burden faced by this rapidly growing group of caregivers.

Silica coating on alumina ceramic: comparison of three chairside air-abrasion devices working for different times and distances.

PubMed

Pestana Passos, S; Dias Vanderlei, A; Ozcan, M; Felipe Valandro, L F; Felipe Valandro, L

2011-03-01

This study evaluated, by scanning electron microscope (SEM) and EDS, the effect of different strategies for silica coating (sandblasters, time and distance) of a glass-infiltrated ceramic (In-Ceram Alumina). Forty-one ceramic blocks were produced. For comparison of the three air-abrasion devices, 15 ceramic samples were divided in three groups (N.=5): Bioart, Microetcher and Ronvig (air-abrasion parameters: 20 s at a distance of 10 mm). For evaluation of the time and distance factors, ceramic samples (N.=5) were allocated in groups considering three applied times (5 s, 13 s and 20 s) and two distances (10 mm and 20 mm), using the Ronvig device. In a control sample, no surface treatment was performed. After that, the micro-morphologic analyzes of the ceramic surfaces were made using SEM. EDS analyzes were carried out to detect the % of silica on representative ceramic surface. ANOVA and Tukey tests were used to analyze the results. One-way ANOVA showed the silica deposition was different for different devices (P=0.0054). The Ronvig device promoted the highest silica coating compared to the other devices (Tukey test). Two-way ANOVA showed the distance and time factors did not affect significantly the silica deposition (application time and distance showed no statistical difference). The Ronvig device provided the most effective silica deposition on glass-infiltrated alumina ceramic surface and the studied time and distance for air-abrasion did not affect the silica coating.

Experimental assessment of diazotroph responses to elevated seawater pCO2 in the North Pacific Subtropical Gyre

NASA Astrophysics Data System (ADS)

Böttjer, Daniela; Karl, David M.; Letelier, Ricardo M.; Viviani, Donn A.; Church, Matthew J.

2014-06-01

We examined short-term (24-72 h) responses of naturally occurring marine N2 fixing microorganisms (termed diazotrophs) to abrupt increases in the partial pressure of carbon dioxide (pCO2) in seawater during nine incubation experiments conducted between May 2010 and September 2012 at Station ALOHA (A Long-term Oligotrophic Habitat Assessment) (22°45'N, 158°W) in the North Pacific Subtropical Gyre (NPSG). Rates of N2 fixation, nitrogenase (nifH) gene abundances and transcripts of six major groups of cyanobacterial diazotrophs (including both unicellular and filamentous phylotypes), and rates of primary productivity (as measured by 14C-bicarbonate assimilation into plankton biomass) were determined under contemporary (~390 ppm) and elevated pCO2 conditions (~1100 ppm). Quantitative polymerase chain reaction (QPCR) amplification of planktonic nifH genes revealed that unicellular cyanobacteria phylotypes dominated gene abundances during these experiments. In the majority of experiments (seven out of nine), elevated pCO2 did not significantly influence rates of dinitrogen (N2) fixation or primary productivity (two-way analysis of variance (ANOVA), P > 0.05). During two experiments, rates of N2 fixation and primary productivity were significantly lower (by 79 to 82% and 52 to 72%, respectively) in the elevated pCO2 treatments relative to the ambient controls (two-way ANOVA, P < 0.05). QPCR amplification of nifH genes and gene transcripts revealed that diazotroph abundances and nifH gene expression were largely unchanged by the perturbation of the seawater pCO2. Our results suggest that naturally occurring N2 fixing plankton assemblages in the NPSG are relatively resilient to large, short-term increases in pCO2.

Longitudinal evaluation of fluoride levels in nails of 18-30-month-old children that were using toothpastes with 500 and 1100 μg F/g.

PubMed

Amaral, Jackeline G; Freire, Isabelle R; Valle-Neto, Eduardo F R; Cunha, Robson F; Martinhon, Cleide C R; Delbem, Alberto C B

2014-10-01

This study aimed to evaluate the fluoride concentration in the fingernails and toenails of children aged 18-30 months during use of fluoride-containing toothpastes supplemented with calcium glycerophosphate (CaGP) or sodium trimetaphosphate (TMP). According to the toothpaste used, children (n = 56) were randomly assigned into three groups: 500 μg F/g with 1% TMP, 500 μg F/g with 0.25% CaGP, and 1100 μg F/g. Fingernails and toenails were collected monthly over a period of 330 days, from the beginning of toothpaste use. Fluoride concentration in the water consumed by the volunteers and fluoride intake from diet and toothpaste were also determined. Fluoride analyses were performed with the electrode after hexamethyldisiloxane-facilitated diffusion or by the direct method, according to the samples. Data passed normality and homoscedasticity tests and were analyzed by 2-way analysis of variance (anova) and 1-way anova followed by Student-Newman-Keuls test (P < 0.05). Fluoride levels in the fingernails and toenails as well as fluoride intake from toothpaste were similar for the groups treated with 500 μg F/g with 1% TMP and 500 μg F/g with 0.25% CaGP toothpastes, but significantly lower than the 1100 μg F/g group (P < 0.05). No significant differences were noted among the groups regarding fluoride intake from diet and that by water consumed by the volunteers (P > 0.05). The results of the longitudinal study suggest that the level of fluoride present in nails was lower with the use of toothpastes with a low fluoride concentration. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Asymmetric training using virtual reality reflection equipment and the enhancement of upper limb function in stroke patients: a randomized controlled trial.

PubMed

Lee, DongJin; Lee, MyungMo; Lee, KyoungJin; Song, ChangHo

2014-07-01

Asymmetric movements with both hands contributed to the improvement of spatially coupled motion. Thus, the aim of this study was to investigate the effects of an asymmetric training program using virtual reality reflection equipment on upper limb function in stroke patients. Twenty-four stroke patients were randomly allocated to an experimental group (n=12) or a control group (n=12). Both groups participated in conventional physical therapy for 2×30 min/d, 5 d/wk, for 4 weeks. The experimental group also participated in an asymmetric training program using virtual reality reflection equipment, and the control group participated in a symmetric training program. Both asymmetric and symmetric programs were conducted for 30 min/d, 5 d/wk, for 4 weeks. To compare upper limb function before and after intervention, the Fugl-Meyer Assessment (FMA), the Box and Block Test (BBT), grip strength, range of motion (ROM), and spasticity were assessed. Both groups showed significant increases in upper limb function, excepting spasticity, after intervention (P<.05, 1-way repeated-measures analysis of variance [ANOVA]). A significant group-time interaction was demonstrated only for shoulder/elbow/wrist items of FMA, BBT, grip strength, and ROM of wrist flexion, extension, and ulnar deviation (P<.05, 2-way repeated-measures ANOVA). This study confirms that the asymmetric training program using virtual reality reflection equipment is an effective intervention method for improving upper limb function in stroke patients. We consider that an additional study based on a program using virtual reflection, which is more functional than performing simple tasks, and consisting of tasks relevant to the activities of daily living be conducted. Copyright © 2014 National Stroke Association. Published by Elsevier Inc. All rights reserved.

Effect of surface treatments on shear bond strength of resin composite bonded to CAD/CAM resin-ceramic hybrid materials

PubMed Central

Güngör, Merve Bankoğlu; Bal, Bilge Turhan; Ünver, Senem; Doğan, Aylin

2016-01-01

PURPOSE The purpose of this study was to assess the effect of surface treatments on shear bond strength of resin composite bonded to thermocycled and non-thermocycled CAD/CAM resin-ceramic hybrid materials. MATERIALS AND METHODS 120 specimens (10×10×2 mm) from each material were divided into 12 groups according to different surface treatments in combination with thermal aging procedures. Surface treatment methods were airborne-particle abrasion (abraded with 50 micron alumina particles), dry grinding (grinded with 125 µm grain size bur), and hydrofluoric acid (9%) and silane application. According to the thermocycling procedure, the groups were assigned as non-thermocycled, thermocycled after packing composites, and thermocycled before packing composites. The average surface roughness of the non-thermocycled specimens were measured after surface treatments. After packing composites and thermocycling procedures, shear bond strength (SBS) of the specimens were tested. The results of surface roughness were statistically analyzed by 2-way Analysis of Variance (ANOVA), and SBS results were statistically analyzed by 3-way ANOVA. RESULTS Surface roughness of GC were significantly lower than that of LU and VE (P<.05). The highest surface roughness was observed for dry grinding group, followed by airborne particle abraded group (P<.05). Comparing the materials within the same surface treatment method revealed that untreated surfaces generally showed lower SBS values. The values of untreated LU specimens showed significantly different SBS values compared to those of other surface treatment groups (P<.05). CONCLUSION SBS was affected by surface treatments. Thermocycling did not have any effect on the SBS of the materials except acid and silane applied GC specimens, which were subjected to thermocycling before packing of the composite resin. PMID:27555894

Impact of Types of Moisturizer and Humidity on the Residual Weight and Viscosity of Liquid and Gel Oral Moisturizers.

PubMed

Murakami, Mamoru; Nishi, Yasuhiro; Fujishima, Kei; Nishio, Misaki; Minemoto, Yoko; Kanie, Takahito; Nishimura, Masahiro

2016-10-01

Oral moisturizers need to be selected based on their material properties. The purpose of this study was to investigate the effects of moisturizer type and humidity on the residual weight and viscosity of oral moisturizers. The weight and viscosity of 17 oral moisturizers (7 liquid and 10 gel) at baseline and after 8 hours were measured using an incubator maintained at 37°C at either 85% or 40% relative humidity (RH). The rate of change in weight (RCW) and the rate of change in viscosity (RCV) were calculated. Data were analyzed with two-way analysis of variance (ANOVA) and Scheffe's test to evaluate the effect of the type of moisturizer (liquid or gel) and humidity (85% or 40% RH) on RCW and RCV. Pearson's correlation coefficient was used to evaluate the relationship between RCW and RCV. Two-way ANOVA results indicated that the type of moisturizer and RH had a significant effect on RCW and RCV (p < 0.05); however, the interaction between them was not significant. The results of multiple comparisons showed that gel moisturizers had a significantly lower RCW and higher RCV than liquid moisturizers (p < 0.05). The RCW and RCV at 40% RH were significantly higher than those at 85% RH (p < 0.05). There was no correlation between RCW and RCV in the liquid moisturizer group, but a significant negative correlation was found in the gel moisturizer group (pp = 0.01). Because viscosity of gel moisturizers increases as weight decreases, selecting gel moisturizers with a minimal change in weight and viscosity would be preferable in the case of a long-time application and severe dry mouth. © 2015 by the American College of Prosthodontists.

Lyophilized allografts without pre-treatment with glutaraldehyde are more suitable than cryopreserved allografts for pulmonary artery reconstruction

PubMed Central

Olmos-Zúãiga, J.R.; Jasso-Victoria, R.; Díaz-Martínez, N.E.; Gaxiola-Gaxiola, M.O.; Sotres-Vega, A.; Heras-Romero, Y.; Baltazares-Lipp, M.; Baltazares-Lipp, M.E.; Santillán-Doherty, P.; Hernández-Jiménez, C.

2015-01-01

Various methods are available for preservation of vascular grafts for pulmonary artery (PA) replacement. Lyophilization and cryopreservation reduce antigenicity and prevent thrombosis and calcification in vascular grafts, so both methods can be used to obtain vascular bioprostheses. We evaluated the hemodynamic, gasometric, imaging, and macroscopic and microscopic findings produced by PA reconstruction with lyophilized (LyoPA) grafts and cryopreserved (CryoPA) grafts in dogs. Eighteen healthy crossbred adult dogs of both sexes weighing between 18 and 20 kg were used and divided into three groups of six: group I, PA section and reanastomosis; group II, PA resection and reconstruction with LyoPA allograft; group III, PA resection and reconstruction with CryoPA allograft. Dogs were evaluated 4 weeks after surgery, and the status of the graft and vascular anastomosis were examined macroscopically and microscopically. No clinical, radiologic, or blood-gas abnormalities were observed during the study. The mean pulmonary artery pressure (MPAP) in group III increased significantly at the end of the study compared with baseline (P=0.02) and final [P=0.007, two-way repeat-measures analysis of variance (RM ANOVA)] values. Pulmonary vascular resistance of groups II and III increased immediately after reperfusion and also at the end of the study compared to baseline. The increase shown by group III vs group I was significant only if compared with after surgery and study end (P=0.016 and P=0.005, respectively, two-way RM ANOVA). Microscopically, permeability was reduced by ≤75% in group III. In conclusion, substitution of PAs with LyoPA grafts is technically feasible and clinically promising. PMID:26648092

Wheat crown rot pathogens Fusarium graminearum and F. pseudograminearum lack specialization.

PubMed

Chakraborty, Sukumar; Obanor, Friday; Westecott, Rhyannyn; Abeywickrama, Krishanthi

2010-10-01

This article reports a lack of pathogenic specialization among Australian Fusarium graminearum and F. pseudograminearum causing crown rot (CR) of wheat using analysis of variance (ANOVA), principal component and biplot analysis, Kendall's coefficient of concordance (W), and κ statistics. Overall, F. pseudograminearum was more aggressive than F. graminearum, supporting earlier delineation of the crown-infecting group as a new species. Although significant wheat line-pathogen isolate interaction in ANOVA suggested putative specialization when seedlings of 60 wheat lines were inoculated with 4 pathogen isolates or 26 wheat lines were inoculated with 10 isolates, significant W and κ showed agreement in rank order of wheat lines, indicating a lack of specialization. The first principal component representing nondifferential aggressiveness explained a large part (up to 65%) of the variation in CR severity. The differential components were small and more pronounced in seedlings than in adult plants. By maximizing variance on the first two principal components, biplots were useful for highlighting the association between isolates and wheat lines. A key finding of this work is that a range of analytical tools are needed to explore pathogenic specialization, and a statistically significant interaction in an ANOVA cannot be taken as conclusive evidence of specialization. With no highly resistant wheat cultivars, Fusarium isolates mostly differ in aggressiveness; however, specialization may appear as more resistant cultivars become widespread.

The Box-Cox power transformation on nursing sensitive indicators: Does it matter if structural effects are omitted during the estimation of the transformation parameter?

PubMed Central

2011-01-01

Background Many nursing and health related research studies have continuous outcome measures that are inherently non-normal in distribution. The Box-Cox transformation provides a powerful tool for developing a parsimonious model for data representation and interpretation when the distribution of the dependent variable, or outcome measure, of interest deviates from the normal distribution. The objectives of this study was to contrast the effect of obtaining the Box-Cox power transformation parameter and subsequent analysis of variance with or without a priori knowledge of predictor variables under the classic linear or linear mixed model settings. Methods Simulation data from a 3 × 4 factorial treatments design, along with the Patient Falls and Patient Injury Falls from the National Database of Nursing Quality Indicators (NDNQI®) for the 3rd quarter of 2007 from a convenience sample of over one thousand US hospitals were analyzed. The effect of the nonlinear monotonic transformation was contrasted in two ways: a) estimating the transformation parameter along with factors with potential structural effects, and b) estimating the transformation parameter first and then conducting analysis of variance for the structural effect. Results Linear model ANOVA with Monte Carlo simulation and mixed models with correlated error terms with NDNQI examples showed no substantial differences on statistical tests for structural effects if the factors with structural effects were omitted during the estimation of the transformation parameter. Conclusions The Box-Cox power transformation can still be an effective tool for validating statistical inferences with large observational, cross-sectional, and hierarchical or repeated measure studies under the linear or the mixed model settings without prior knowledge of all the factors with potential structural effects. PMID:21854614

The Box-Cox power transformation on nursing sensitive indicators: does it matter if structural effects are omitted during the estimation of the transformation parameter?

PubMed

Hou, Qingjiang; Mahnken, Jonathan D; Gajewski, Byron J; Dunton, Nancy

2011-08-19

Many nursing and health related research studies have continuous outcome measures that are inherently non-normal in distribution. The Box-Cox transformation provides a powerful tool for developing a parsimonious model for data representation and interpretation when the distribution of the dependent variable, or outcome measure, of interest deviates from the normal distribution. The objectives of this study was to contrast the effect of obtaining the Box-Cox power transformation parameter and subsequent analysis of variance with or without a priori knowledge of predictor variables under the classic linear or linear mixed model settings. Simulation data from a 3 × 4 factorial treatments design, along with the Patient Falls and Patient Injury Falls from the National Database of Nursing Quality Indicators (NDNQI® for the 3rd quarter of 2007 from a convenience sample of over one thousand US hospitals were analyzed. The effect of the nonlinear monotonic transformation was contrasted in two ways: a) estimating the transformation parameter along with factors with potential structural effects, and b) estimating the transformation parameter first and then conducting analysis of variance for the structural effect. Linear model ANOVA with Monte Carlo simulation and mixed models with correlated error terms with NDNQI examples showed no substantial differences on statistical tests for structural effects if the factors with structural effects were omitted during the estimation of the transformation parameter. The Box-Cox power transformation can still be an effective tool for validating statistical inferences with large observational, cross-sectional, and hierarchical or repeated measure studies under the linear or the mixed model settings without prior knowledge of all the factors with potential structural effects.

Factors Influencing Stress, Burnout, and Retention of Secondary Teachers

ERIC Educational Resources Information Center

Fisher, Molly H.

2011-01-01

This study examines the stress, burnout, satisfaction, and preventive coping skills of nearly 400 secondary teachers to determine variables contributing to these major factors influencing teachers. Analysis of Variance (ANOVA) statistics were conducted that found the burnout levels between new and experienced teachers are significantly different,…

ANOVA with Rasch Measures.

ERIC Educational Resources Information Center

Linacre, John Michael

Various methods of estimating main effects from ordinal data are presented and contrasted. Problems discussed include: (1) at what level to accumulate ordinal data into linear measures; (2) how to maintain scaling across analyses; and (3) the inevitable confounding of within cell variance with measurement error. An example shows three methods of…

The Impact of Bullying and Victimization on Students' Relationships

ERIC Educational Resources Information Center

Demanet, Jannick; Van Houtte, Mieke

2012-01-01

Grschool, in Flemish secondary schools. Methods: We use data from the Flemish Educational Assessment (FlEA), consisting of 11,872 students in 85 schools. Multivariate analyses of variance (ANOVA) were performed. Results: Non-involved students felt most attached to peers, parents, teachers, and school. Bullies matched the level of parental…

Early Childhood Inservice and Preservice Teachers' Perceived Levels of Preparedness to Handle Stress in Their Students

ERIC Educational Resources Information Center

Onchwari, Jacqueline

2010-01-01

This article reports a study that investigated preservice and inservice early childhood teachers' perceived levels of preparedness to handle stress in early childhood and elementary education students. A survey that included vignettes was used to collect data. Data were analyzed both qualitatively and statistically, using one-way ANOVA, "t"-test,…

Objectively Assessed Exercise Behavior in Chinese Patients with Early-Stage Cancer: A Predictor of Perceived Benefits, Communication with Doctors, Medical Coping Modes, Depression and Quality of Life.

PubMed

Liu, Zhunzhun; Zhang, Lanfeng; Shi, Songsong; Xia, Wenkai

2017-01-01

This study sought to identify factors associated with objectively assessed exercise behavior in Chinese patients with early-stage cancer. Three hundred and fifty one cancer patients were recruited from the Affiliated Jiangyin Hospital of Southeast University Medical College and the Nantong Tumor Hospital. One-way ANOVA, Pearson Chi-square tests and regression analysis were employed to identify the correlations between physical exercise and the measured factors. The results showed that occupation type (χ2 = 14.065; p = 0.029), monthly individual monthly income level (χ2 = 24.795; p = 0.003), BMI (χ2 = 15.709; p = 0.015) and diagnosis (χ2 = 42.442; p < 0.000) were significantly correlated with the subjects self-reported exercise with different frequency per week. Differences in the frequency of exercise were associated with different degrees of reported Benefit Finding (BF) (F = 24.651; p < 0.000), communication with doctors (F = 15.285; p < 0.000), medical coping modes (F = 45.912; p < 0.000), social support (F = 2.938; p = 0.030), depression (F = 6.017; p < 0.000), and quality of life (F = 12.288; p < 0.000). Multiple regression analysis showed that 1.6%-6.4% of the variance in five variables, excluding social support and optimism could be explained by exercise. Our results indicated that benefit finding, medical coping modes, communication with doctors, social support, depression and quality of life were significantly correlated with exercise. The variance in several psychosocial factors (benefit finding, medical coping modes, the communication with doctors, depression and quality of life) could be explained by exercise. Psychosocial factors should be addressed and examined over time when evaluating the effect of physical exercise that is prescribed as a clinically relevant treatment.

Job enlargement and mechanical exposure variability in cyclic assembly work.

PubMed

Möller, Therése; Mathiassen, Svend Erik; Franzon, Helena; Kihlberg, Steve

2004-01-15

Cyclic assembly work is known to imply a high risk for musculoskeletal disorders. To have operators rotate between work tasks is believed to be one way of decreasing this risk, since it is expected to increase variation in mechanical and psychological exposures (physical and mental loads). This assumption was investigated by assessing mechanical exposure variability in three assembly tasks in an electronics assembly plant, each on a separate workstation, as well as in a 'job enlargement' scenario combining all three stations. Five experienced operators worked for 1 h on each station. Data on upper trapezius and forearm extensor muscle activity were obtained by means of electromyography (EMG), and working postures of the head and upper arms were assessed by inclinometry. The cycle-to-cycle variance of parameters representing the three exposure dimensions: level, frequency and duration was estimated using ANOVA algorithms for each workstation separately as well as for a balanced combination of all three. For a particular station, the variability of trapezius EMG activity levels relative to the mean was higher than for extensor EMG: between-cycles coefficients of variation (CV) about 0.15 and 0.10, respectively. A similar relationship between CV applied to the parameter describing frequency of EMG activity. Except for head inclination levels, the between-cycles CV was larger for posture parameters than for EMG. The between-cycles variance increased up to six fold in the job enlargement scenario, as compared to working at only one station. The difference in mean exposure between workstations was larger for trapezius EMG parameters than for forearm extensor EMG and postures, and hence the effect of job enlargement on exposure variability was more pronounced for the trapezius. For some stations, job enlargement even implied less cycle-to-cycle variability in forearm extensor EMG parameters than working at that station only. Whether the changes in exposure variability associated with job enlargement were sufficient to imply a decreased risk for musculoskeletal disorders is not known.

Comparative evaluation of low cost materials as constructed wetland filling media

NASA Astrophysics Data System (ADS)

Pinho, Henrique J. O.; Vaz, Mafalda M.; Mateus, Dina M. R.

2017-11-01

Three waste materials from civil construction activities were assessed as low cost alternative filling materials used in Constructed Wetlands (CW). CW are green processes for wastewater treatment, whose design includes an appropriate selection of vegetation and filling material. The sustainability of such processes may be incremented using recovered wastes as filling materials. The abilities of the materials to support plant growth and to contribute to pollutants removal from wastewater were assessed and compared to expanded clay, a filling usually used in CW design. Statistical analysis, using one-way ANOVA and Welch's ANOVA, demonstrate that limestone fragments are a better choice of filling material than brick fragments and basalt gravel.

The Influencing Factor Analysis on the Performance Evaluation of Assembly Line Balancing Problem Level 1 (SALBP-1) Based on ANOVA Method

NASA Astrophysics Data System (ADS)

Chen, Jie; Hu, Jiangnan

2017-06-01

Industry 4.0 and lean production has become the focus of manufacturing. A current issue is to analyse the performance of the assembly line balancing. This study focus on distinguishing the factors influencing the assembly line balancing. The one-way ANOVA method is applied to explore the significant degree of distinguished factors. And regression model is built to find key points. The maximal task time (tmax ), the quantity of tasks (n), and degree of convergence of precedence graph (conv) are critical for the performance of assembly line balancing. The conclusion will do a favor to the lean production in the manufacturing.

Mental and Reproductive Health Correlates of Academic Performance among Debre Berhan University Female Students, Ethiopia: The Case of Premenstrual Dysphoric Disorder

PubMed Central

Alemu, Sisay Mulugeta; Haile, Yohannes Gebreegziabhere

2017-01-01

Background Globally 3 to 8% of reproductive age women are suffering from premenstrual dysphoric disorder (PMDD). Several mental and reproductive health-related factors cause low academic achievement during university education. However, limited data exist in Ethiopia. The aim of the study was to investigate mental and reproductive health correlates of academic performance. Methods Institution based cross-sectional study was conducted with 667 Debre Berhan University female students from April to June 2015. Academic performance was the outcome variable. Mental and reproductive health characteristics were explanatory variables. Two-way analysis of variance (ANOVA) test of association was applied to examine group difference in academic performance. Result Among 529 students who participated, 49.3% reported mild premenstrual syndrome (PMS), 36.9% reported moderate/severe PMS, and 13.8% fulfilled PMDD diagnostic criteria. The ANOVA test of association revealed that there was no significant difference in academic performance between students with different level of PMS experience (F-statistic = 0.08, p value = 0.93). Nevertheless, there was a significant difference in academic performance between students with different length of menses (F-statistic = 5.15, p value = 0.006). Conclusion There was no significant association between PMS experience and academic performance, but on the other hand, the length of menses significantly associated with academic performance. PMID:28630874

Effect of coronal flaring on apical extrusion of debris during root canal instrumentation using single-file systems.

PubMed

Topçuoğlu, H S; Üstün, Y; Akpek, F; Aktı, A; Topçuoğlu, G

2016-09-01

To evaluate the effect of coronal flaring on the amount of debris extruded apically during root canal preparation using the Reciproc, WaveOne (WO) and OneShape (OS) single-file systems. Ninety extracted single-rooted mandibular incisor teeth were randomly assigned to six groups (n = 15 for each group) for canal instrumentation. Endodontic access cavities were prepared in each tooth. In three of the six groups, coronal flaring was not performed; coronal flaring was performed with Gates-Glidden drills on all teeth in the remaining three groups. The canals were then instrumented with one or other of the following single-file instrument systems: Reciproc, WO and OS. Debris extruded apically during instrumentation was collected into pre-weighed Eppendorf tubes. The tubes were then stored in an incubator at 70 °C for 5 days. The weight of the dry extruded debris was established by subtracting the pre-instrumentation and post-instrumentation weight of the Eppendorf tubes for each group. Data were analysed using one-way analysis of variance (anova) and Tukey's post hoc tests (P = 0.05). Reciproc and WO files without coronal flaring produced significantly more debris compared with the other groups (P < 0.05). There was no significant difference in apical extrusion of debris amongst the other groups (P > 0.05). All single-file systems caused apical extrusion of debris. Performing coronal flaring prior to canal preparation reduced the amount of apically extruded debris when using Reciproc or WO systems. © 2015 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Safety of nonthermal atmospheric pressure plasma for tooth bleaching evaluated in terms of microhardness and mineral content

NASA Astrophysics Data System (ADS)

Nam, S. H.; Hong, J. W.; Lee, H. J.; Jeon, Y. C.; Kim, G. C.

2017-08-01

The purpose of this study was to evaluate the influence of bleaching with nonthermal atmospheric pressure plasma and 15% hydrogen peroxide (HP) or 15% carbamide peroxide (CP). Sixty human enamel and dentin slabs were randomly assigned to six groups as follows: Group 1 was a control group and did not receive any treatment; Group 2 was exposed only to plasma, as a negative control; Group 3 was treated with 15% HP; Group 4 was treated with 15% HP plus plasma; Group 5 was treated with 15% CP alone; and Group 6 was treated with 15% CP plus plasma during 30 min bleaching treatments. A microhardness measurement was conducted according to a microhardness tester. The amount of calcium (Ca), phosphorus (P), chloride (Cl), sodium (Na), magnesium (Mg), and zinc (Zn) in the enamel and dentin was quantified with an electron probe microanalyzer (EPMA). The data were analyzed by using the Student’s t test and one-way analysis of variance (ANOVA), complemented by Tukey’s test. The statistical analysis did not show any significant differences in microhardness values and six mineral contents in all groups (p  >  0.05). Therefore, we believe that the application of nonthermal atmospheric pressure plasma is a safe energy source for tooth bleaching.

Attributions, future time perspective and career maturity in nursing undergraduates: correlational study design.

PubMed

Cheng, Cheng; Yang, Liu; Chen, Yuxia; Zou, Huijing; Su, Yonggang; Fan, Xiuzhen

2016-01-25

Career maturity is an important parameter as nursing undergraduates prepare for their future careers. However, little is known regarding the relationships between attributions, future time perspective and career maturity among nursing undergraduates. The purpose of this study was to investigate the degree of career maturity and its relationship with attributions and future time perspective. A cross-sectional survey was designed. This survey was administered to 431 Chinese nursing undergraduates. Independent-sample t-tests and one-way ANOVA were performed to examine the mean differences between categories of binary and categorical demographic characteristics, respectively. Pearson correlations and multiple linear regressions were used to test the relationships between attributions, future time perspective and career maturity. The degree of career maturity was moderate among nursing undergraduates and that internal attributions of academic achievement, future efficacy and future purpose consciousness were positively associated with career maturity (all p < 0.01). These three factors accounted for 37.6% of the variance in career maturity (adjusted R(2) = 0.376). These findings might assist nursing educators and career counselors to improve nursing undergraduate career maturity by elucidating the imperative roles of internal attributions and future time perspective and to facilitate their transition from school to clinical practice.

Uninvolved versus target muscle contraction during contract: relax proprioceptive neuromuscular facilitation stretching.

PubMed

Azevedo, Daniel Camara; Melo, Raphael Marques; Alves Corrêa, Ricardo Vidal; Chalmers, Gordon

2011-08-01

The purpose of this study was to compare the acute effect of the contract-relax (CR) stretching technique on knee active range of motion (ROM) using target muscle contraction or an uninvolved muscle contraction. pre-test post-test control experimental design. Clinical research laboratory. Sixty healthy men were randomly assigned to one of three groups. The Contract-Relax group (CR) performed a traditional hamstring CR stretch, the Modified Contract-Relax group (MCR) performed hamstring CR stretching using contraction of an uninvolved muscle distant from the target muscle, and the Control group (CG) did not stretch. Active knee extension test was performed before and after the stretching procedure. Two-way between-within analysis of variance (ANOVA) results showed a significant interaction between group and pre-test to post-test (p < 0.001). Post-hoc examination of individual groups showed no significant change in ROM for the CG (0.8°, p = 0.084), and a significant moderate increase in ROM for both the CR (7.0°, p < 0.001) and MCR (7.0°, p < 0.001) groups. ROM gain following a CR PNF procedure is the same whether the target stretching muscle is contracted, or an uninvolved muscle is contracted. Copyright © 2011 Elsevier Ltd. All rights reserved.

Edible Film from the Pectin of Papaya Skin (The Study of Cassava Starch and Glycerol Addition)

NASA Astrophysics Data System (ADS)

Rosida; Sudaryati; Yahya, A. M.

2018-01-01

The production of edible cooking made from the pectin of papaya skin with cassava starch and glycerol adition had been studied. The usage of pectin of papaya skin was one way to use papaya skin waste in order to raise its economic value. The aim of this study was to study the effect of cassava starch and glycerol concentration on the product qualities and to determine the the best treatment in making a good quality adible film and acceptable by the consumer. This research used completely randomized design in factorial patern with two factors. The first factor was cassava starch concentration (25%, 35% and 45%) and the second factor was glycerol concentration (20 %, 15% and 10). The data were analyzed by Analysis of Variance (Anova) and Duncan’s Multiple Range Test to detect the difference between the treatment. The best treatment was 25% cassava starch addition and 10% glycerol concentration which produced edible film which had moisture content of 21.16%, thickness of 0.023 mm, tensile strength of 1.900 N, elasticity of 14.223%, and vapor transmission rate of 116.963 g/m2/24 hours. So the production of edible film from papaya skin pectin was potential to be developed.

White syndrome on massive corals: A case study in Paiton power plant, East Java

NASA Astrophysics Data System (ADS)

Muzaki, Farid Kamal; Saptarini, Dian; Riznawati, Aida Efrini

2017-06-01

As a stenothermal organism, coral easily affected by high-temperature cooling water discharged by a power plant into surrounding waters; which may lead to a rapid spread and transmission of coral disease, including White Syndrome. This study aimed to measure the prevalence of WS on massive corals in Paiton Power Plant waters. Research was conductedduring May 2015 at three observation stations; west and east side of water discharge canal (DB and DT) and water intake canal (WI). Observed parameters including ambient environmental variables (sea surface and bottom temperature, salinity, dissolved oxygen/DO, pH, and visibility); the cover of life corals (percent and genera composition) and prevalence of coral disease at 5 m depth. One-way ANOVA (analysis of variance, p=0.05) was performed to test the difference of coral disease prevalence from different observation stations. As the results, Coral coverage percentage in WI (85.75%), DB (60.75%), and DT (40.8%). Prevalence of WS in DB was highest (40.49±2.12% in DB, 13.53±11.5% in DT and 6.44±3.6 %, respectively). It can be assumed that prevalence of White Syndrome in those locations may be correlated to temperature which highest average temperature occurred in DB stations.

Birth order and psychopathology.

PubMed

Risal, Ajay; Tharoor, Hema

2012-07-01

Ordinal position the child holds within the sibling ranking of a family is related to intellectual functioning, personality, behavior, and development of psychopathology. To study the association between birth order and development of psychopathology in patients attending psychiatry services in a teaching hospital. Hospital-based cross-sectional study. Retrospective file review of three groups of patients was carried out. Patient-related variables like age of onset, birth order, family type, and family history of mental illness were compared with psychiatry diagnosis (ICD-10) generated. SPSS 13; descriptive statistics and one-way analysis of variance (ANOVA) were used. Mean age of onset of mental illness among the adult general psychiatry patients (group I, n = 527) was found to be 33.01 ± 15.073, while it was 11.68 ± 4.764 among the child cases (group II, n = 47) and 26.74 ± 7.529 among substance abuse cases (group III, n = 110). Among group I patients, commonest diagnosis was depression followed by anxiety and somatoform disorders irrespective of birth order. Dissociative disorders were most prevalent in the first born child (36.7%) among group II patients. Among group III patients, alcohol dependence was maximum diagnosis in all birth orders. Depression and alcohol dependence was the commonest diagnosis in adult group irrespective of birth order.

The effect of working in an infection isolation room on hospital nurses' job satisfaction.

PubMed

Kagan, Ilya; Fridman, Shoshana; Shalom, Esther; Melnikov, Semyon

2018-03-01

To examine how the nature of working in a carbapenemase-producing Klebsiella pneumoniae infection isolation room affects nurses' job performance and job satisfaction. Job satisfaction is under intensive research as a factor in the retention of nursing staff. In a cross-sectional design study, a convenience sample of 87 registered nurses who had worked in carbapenemase-producing Klebsiella pneumoniae isolation rooms in a tertiary medical centre in Israel answered a self-administered questionnaire. Data were analysed by descriptive statistics, Pearson correlation coefficients, t tests, one-way ANOVA and multiple regression analysis. Job satisfaction was significantly correlated with perceived knowledge of carbapenemase-producing Klebsiella pneumoniae, with personal experience of working in an isolation room and the perceived level of professional functioning. Multiple regression analysis found that the quality of the nurses' personal experience of isolation room work and their perceived level of professional functioning there explained 33% of the variance in job satisfaction. Managers need to take into account that prolonged work in isolation can negatively impinge upon both performance and job satisfaction. Managers can consider refraining from lengthy nurse assignment to the isolation room. This would also apply to other areas of nursing practice where work is performed in isolation. © 2017 John Wiley & Sons Ltd.

Texture Feature Analysis for Different Resolution Level of Kidney Ultrasound Images

NASA Astrophysics Data System (ADS)

Kairuddin, Wan Nur Hafsha Wan; Mahmud, Wan Mahani Hafizah Wan

2017-08-01

Image feature extraction is a technique to identify the characteristic of the image. The objective of this work is to discover the texture features that best describe a tissue characteristic of a healthy kidney from ultrasound (US) image. Three ultrasound machines that have different specifications are used in order to get a different quality (different resolution) of the image. Initially, the acquired images are pre-processed to de-noise the speckle to ensure the image preserve the pixels in a region of interest (ROI) for further extraction. Gaussian Low- pass Filter is chosen as the filtering method in this work. 150 of enhanced images then are segmented by creating a foreground and background of image where the mask is created to eliminate some unwanted intensity values. Statistical based texture features method is used namely Intensity Histogram (IH), Gray-Level Co-Occurance Matrix (GLCM) and Gray-level run-length matrix (GLRLM).This method is depends on the spatial distribution of intensity values or gray levels in the kidney region. By using One-Way ANOVA in SPSS, the result indicated that three features (Contrast, Difference Variance and Inverse Difference Moment Normalized) from GLCM are not statistically significant; this concludes that these three features describe a healthy kidney characteristics regardless of the ultrasound image quality.

Prevalence of overactive bladder and its impact on quality of life in 1025 patients with type 2 diabetes in mainland China.

PubMed

Xu, Dongjuan; Gao, Jie; Wang, Xiaojuan; Huang, Liqun; Wang, Kefang

2017-08-01

This study examined the prevalence of overactive bladder (OAB) and investigated the impact of OAB on quality of life (QOL) in patients with type 2 diabetes in Mainland China. A total of 1025 patients with type 2 diabetes were surveyed. Patients were grouped into no OAB, dry OAB, and wet OAB groups according to the presence of OAB and urge incontinence. Descriptive analyses, one-way analysis of variance (ANOVA) and multivariable regression models were conducted to assess the prevalence of OAB and the effect of OAB on QOL. The prevalence of OAB among patients with type 2 diabetes was 13.9% (with dry OAB, 6.1%; with wet OAB, 7.8%). Multivariable regression models showed that OAB symptoms caused significant deterioration of the physical and mental aspects of QOL. Compared with dry OAB, wet OAB further decreased the mental aspect of QOL. Moreover, the effect sizes of the impacts of dry and wet OAB on QOL were larger than those of diabetic neuropathy or retinopathy, diabetes duration, or urinary tract infection history. OAB is more common in patients with type 2 diabetes than in the general population and substantially decreases patient QOL. Copyright © 2017 Elsevier Inc. All rights reserved.

Spatial distribution and source identification of heavy metals in surface soils in a typical coal mine city, Lianyuan, China.

PubMed

Liang, Jie; Feng, Chunting; Zeng, Guangming; Gao, Xiang; Zhong, Minzhou; Li, Xiaodong; Li, Xin; He, Xinyue; Fang, Yilong

2017-06-01

In this study, we investigated the pollution degree and spatial distribution of heavy metals and determined their sources in topsoil in a typical coal mine city, Lianyuan, Hunan Province, China. We collected 6078 soil surface samples in different land use types. And the concentrations of Zn, Cd, Cu, Hg, Pb, Sb, As, Mo, V, Mn, Fe and Cr were measured. The average contents of all heavy metals were lower than their corresponding Grade II values of Chinese Soil Quality Standard with the exception of Hg. However, average contents of twelve heavy metals, except for Mn, exceeded their background level in soils in Hunan Province. Based on one-way analysis of variance (ANOVA), the contents of Cu, Zn, Cd, Pb, Hg, Mo and V were related to the anthropogenic source and there were statistically significant differences in their concentrations among different land use patterns. The spatial variation of heavy metal was visualized by GIS. The PMF model was used to ascertain contamination sources of twelve heavy metals and apportion their source contributions in Lianyuan soils. The results showed that the source contributions of the natural source, atmospheric deposition, industrial activities and agricultural activities accounted for 33.6%, 26.05%, 23.44% and 16.91%, respectively. Copyright © 2017 Elsevier Ltd. All rights reserved.

Increase Concentration of Transforming Growth Factor Beta (TGF-β) in Breast Milk of Mothers With Psychological Disorders.

PubMed

Shariat, Mamak; Abedinia, Nasrin; Rezaei, Nima; Farrokhzad, Nahid

2017-07-01

Several studies have shown an imbalance between proinflammatory and anti-inflammatory cytokines in depression and anxiety disorders. However, less attention has been paid to the role of cytokines in psychological disorder in mothers who breastfeed. This study looks at whether concentration levels of TGF-β2 are altered in anxious and depressive breastfeeding mothers. This study checked the concentration level of TGF-B2 in relation with psychological symptoms on 110 breastfeeding mothers; based on random sampling method with using of Beck Depression Inventory (BDI), General Health Questionnaire (GHQ) and Spielberger Stress Scale (STAI) in 2015 also TGF-β2 was measured in breast milk using ELISA. We used of Pearson Correlation Method, independent t-test and one-way analysis of variance (ANOVA) to analyze the data. Psychological symptoms (Anxiety and depression) showed positive correlation with TGF-Beta level in which relationships were significant (P=0.01). Psychological problems may be uniquely associated with the level of TGF-β in breast milk. More attention should be paid to the mental health of mothers during breastfeeding, and more research needs to be done in this subject to clarify the relationship between psychological variables with the level of TGF-β in breast milk.

Effect of ozone application on the resin-dentin microtensile bond strength.

PubMed

Rodrigues, P C F; Souza, J B; Soares, C J; Lopes, L G; Estrela, C

2011-01-01

When ozone is used during caries treatment, bond strength can be compromised by the release of oxygen. The use of antioxidant agents neutralizes the free oxygen. The aim of this study was to evaluate the effects of ozone and sodium ascorbate on resin-dentin microtensile bond strength (μTBS). Forty human third molars were divided into four groups: Group 1, not treated with ozone; Group 2, ozone application followed by acid etching; Group 3, acid etching followed by ozone application; and Group 4, ozone and application of sodium ascorbate. Bonded beams (1.0 mm(2)) were tested under tension (0.5 mm min(-1)). The μTBS values were analyzed using one-way analysis of variance (ANOVA) and the Tukey test (p=0.05). All beams that fractured were analyzed under stereomicroscopy (40×). Group 1 had significantly higher μTBS values than Group 2 or 3. The μTBS values of Groups 1 and 4 were similar and higher than those of Group 2. The use of ozone in Group 2 resulted in lower values of μTBS in all conditions evaluated. The predominant failure mode was adhesive. The application of ozone decreased the μTBS of the dentin-composite resin interface. These values were reversed when compared with Groups 1 and 2 when sodium ascorbate was used.

Approaches to learning among occupational therapy undergraduate students: A cross-cultural study.

PubMed

Brown, Ted; Fong, Kenneth N K; Bonsaksen, Tore; Lan, Tan Hwei; Murdolo, Yuki; Gonzalez, Pablo Cruz; Beng, Lim Hua

2017-07-01

Students may adopt various approaches to academic learning. Occupational therapy students' approaches to study and the impact of cultural context have not been formally investigated to date. To examine the approaches to study adopted by undergraduate occupational therapy students from four different cultural settings. 712 undergraduate occupational therapy students (n = 376 from Australia, n = 109 from Hong Kong, n = 160 from Norway and n = 67 from Singapore) completed the Approaches and Study Skills Inventory for Students (ASSIST). A one-way analysis of variance (ANOVA) was conducted to compare the ASSIST subscales for the students from the four countries. Post-hoc comparisons using the Tukey HSD test indicated that the mean scores for the strategic approach were significantly different between Australia and the other three countries. The mean scores for the surface approach were significantly different between Australia and Hong Kong, and Hong Kong and Norway. There were no significant differences between the deep approach to studying between Australia, Norway, Singapore and Hong Kong. Culture and educational context do appear to impact the approaches to study adopted by undergraduate occupational therapy students. Academic and practice educators need to be cognizant of what approaches to studying the students they work with adopt.

Evaluation of microhardness, surface roughness, and wear behavior of different types of resin composites polymerized with two different light sources.

PubMed

Topcu, Fulya Toksoy; Erdemir, Ugur; Sahinkesen, Gunes; Yildiz, Esra; Uslan, Ibrahim; Acikel, Cengizhan

2010-02-01

The microhardness, surface roughness and wear resistance of different types of resin composites, polymerized by a Quartz Tungsten Halogen (QTH) or Light Emitting Diode (LED) light curing units (LCU) were evaluated in this in vitro study. Cylindrical blocks were prepared from composites (8 mm in diameter, and 2 mm in thickness) and polymerized by a LED or a QTH LCU. Vickers hardness was measured on the top and bottom surfaces of the specimens. Surface roughness was measured with a surface profilometer on the top of the specimens. For the wear test, specimens were tested in a conventional pin-on-disc tribology machine under 15 N loads. The statistical analyses were performed by one-way analysis of variance (ANOVA) and t-tests, including the Bonferroni correction. Nanocomposite material Clearfil Majesty Posterior showed the highest hardness values in all polymerization types at the top and bottom surfaces (p < 0.05). Microhybrid Clearfil APX and hybrid Quixfil composites demonstrated the greatest surface roughness. Wear resistance of Clearfil Majesty Posterior was found to be the highest among the other tested resin composites. The results indicated that Clearfil Majesty Posterior demonstrated higher microhardness, less surface roughness, and higher wear resistance when compared with the other tested materials for both polymerization types.

Measurement of performance using acceleration control and pulse control in simulated spacecraft docking operations

NASA Technical Reports Server (NTRS)

Brody, Adam R.; Ellis, Stephen R.

1992-01-01

Nine commercial airline pilots served as test subjects in a study to compare acceleration control with pulse control in simulated spacecraft maneuvers. Simulated remote dockings of an orbital maneuvering vehicle (OMV) to a space station were initiated from 50, 100, and 150 meters along the station's -V-bar (minus velocity vector). All unsuccessful missions were reflown. Five way mixed analysis of variance (ANOVA) with one between factor, first mode, and four within factors (mode, bloch, range, and trial) were performed on the data. Recorded performance measures included mission duration and fuel consumption along each of the three coordinate axes. Mission duration was lower with pulse mode, while delta V (fuel consumption) was lower with acceleration mode. Subjects used more fuel to travel faster with pulse mode than with acceleration mode. Mission duration, delta V, X delta V, Y delta V., and Z delta V all increased with range. Subjects commanded the OMV to 'fly' at faster rates from further distances. These higher average velocities were paid for with increased fuel consumption. Asymmetrical transfer was found in that the mode transitions could not be predicted solely from the mission duration main effect. More testing is advised to understand the manual control aspects of spaceflight maneuvers better.

Flexural Strength of Polymethyl Methacrylate Repaired with Fiberglass.

PubMed

Golbidi, Fariba; Pozveh, Maryam Amini

2017-07-01

The purpose of this experimental study was to discover a method to increase the strength of repaired polymethyl methacrylate (PMMA) samples. In this experimental study, 40 specimens with the dimensions of 65×10×2.5mm 3 were fabricated using heat-curing acrylic resin. Sixteen specimens were repaired with fiberglass and self-curing PMMA, while 16 samples were repaired with self-curing PMMA. Eight specimens were left intact as the control group. Afterwards, the flexural strengths of the repaired and intact specimens were measured by three-point bending test in a universal testing machine. Data were analyzed with one-way analysis of variance (ANOVA) and Tukey's HSD and LSD tests. The level of significance was set at P<0.05. The mean flexural strength of the samples repaired with fiberglass was higher than that of the other repaired samples. However, the difference was statistically significant only with respect to the Meliodent group (P=0.008). Impregnated fiberglass could be used in the repair of denture bases to improve the flexural strength. In terms of the fracture site, it can be concluded that the lower flexural strength of the auto-polymerizing acryl compared to that of the heat-curing type was the main reason for the occurrence of fractures, rather than the weak bond between heat-curing and auto-polymerizing acrylic resins.

The influence of granting npk fertilizer and nanosilic fertilizers on the growth of Ganyong plant (Canna edulis Ker.)

NASA Astrophysics Data System (ADS)

Barita, Yahya; Prihastanti, Erma; Haryanti, Sri; Subagio, Agus; Ngadiwiyana

2018-05-01

Ganyong is a herbaceous plant which included in the tuberous plant group. One of the ways to increase the growth of ganyong plants is by combining Nanosilica and NPK. Nanosilica is an fertilizer with nutrient contain nano size of silica. This research was conducted using Completely Randomized Design (CRD) and consisted of 6 treatments with 3 replication were control (without nanosil and NPK fertilizers); (combination 0% nanosilic and 100% NPK); (combination 25% nanosilic and 75% NPK); (50% nanosilic and 50% NPK); (75% nanosilic and 25% NPK) and (100% nanosilic and 0% NPK). Parameters of this research consisted stomata and growth rate: plant height, leaf quantity, leaf color, wet weight and dry weight. Analysis of Variance (Anova) were used to analyze the data, and if significant difference were found, the data tested further by Duncan Multiple Range Test (DMRT) at 95% significant level. The results showed that the combination of Nanosilica and NPK fertilizers affected plant height, dry weight and wet weight of the plant. The combination of 75% nanosil fertilizer and 25% optimal NPK fertilizer increased plant height, dry weight and wet weight on ganyong. The combination of nanosilic and NPK did not affected to amount stomata in ganyong.

Positional Role Differences in the Aerobic and Anaerobic Power of Elite Basketball Players.

PubMed

Pojskić, Haris; Šeparović, Vlatko; Užičanin, Edin; Muratović, Melika; Mačković, Samir

2015-12-22

The aim of the present study was to compare the aerobic and anaerobic power and capacity of elite male basketball players who played multiple positions. Fifty-five healthy players were divided into the following three different subsamples according to their positional role: guards (n = 22), forwards (n = 19) and centers (n = 14). The following three tests were applied to estimate their aerobic and anaerobic power and capacities: the countermovement jump (CMJ), a multistage shuttle run test and the Running-based Anaerobic Sprint Test (RAST). The obtained data were used to calculate the players' aerobic and anaerobic power and capacities. To determine the possible differences between the subjects considering their different positions on the court, one-way analysis of variance (ANOVA) with the Bonferroni post-hoc test for multiple comparisons was used. The results showed that there was a significant difference between the different groups of players in eleven out of sixteen measured variables. Guards and forwards exhibited greater aerobic and relative values of anaerobic power, allowing shorter recovery times and the ability to repeat high intensity, basketball-specific activities. Centers presented greater values of absolute anaerobic power and capacities, permitting greater force production during discrete tasks. Coaches can use these data to create more individualized strength and conditioning programs for different positional roles.

Pharmacological Evaluation of “Sugar Remedy,” A Polyherbal Formulation, on Streptozotocin-Induced Diabetic Mellitus in Rats

PubMed Central

Singhal, Sandeep; Rathore, Arvind Singh; Lohar, Vikram; Dave, Rakesh; Dave, Jeetesh

2014-01-01

In the present study, Sugar Remedy, a polyherbal formulation (manufactured by Umalaxmi Organics Pvt Ltd, Jodhpur, Rajasthan, India) was evaluated for its antihyperglycemic, antihyperlipidemic, and antioxidant effects against normal and streptozotocin (STZ)-induced diabetic rats. Type II diabetes was induced in male Wistar rats by administration of a single intraperitoneal (IP) injection of STZ at a dose of 60 mg/kg. Effects of three different doses of Sugar Remedy suspension (185, 370, and 740 mg/kg/day, orally) and Metformin (500 mg/kg/day, orally) administered for 21 days were studied on parameters such as blood glucose, lipid profile, and antioxidant levels. Results were analyzed using one-way analysis of variance (ANOVA) followed by Dunnett's test. No significant changes were noticed in blood glucose, serum lipid levels, and kidney parameters in normal rats treated with Sugar Remedy suspension alone. The efficacy of Sugar Remedy as an antihyperglycemic, antihyperlipidemic, and antioxidant agent in STZ-induced diabetes was comparable to that of the standard, 500 mg/kg of Metformin. Present findings provide experimental evidence that Sugar Remedy has significant antihyperglycemic, antihyperlipidemic, and antioxidative effects in diabetic experimental rats. Hence, Sugar Remedy may be regarded as a promising natural and safe remedy for the prevention or delay of diabetic complications. PMID:25161924

Recovery from desflurane anesthesia in horses with and without post-anesthetic xylazine.

PubMed

Aarnes, Turi K; Bednarski, Richard M; Bertone, Alicia L; Hubbell, John A E; Lerche, Phillip

2014-04-01

The objective of this study was to compare recovery from desflurane anesthesia in horses with or without post-anesthetic xylazine. Six adult horses were anesthetized on 2 occasions, 14 d apart using a prospective, randomized crossover design. Horses were sedated with xylazine, induced to lateral recumbency with ketamine and diazepam, and anesthesia was maintained with desflurane. One of 2 treatments was administered intravenously at the end of anesthesia: xylazine [0.2 mg/kg body weight (BW)] or an equivalent volume of saline. Recovery parameters were recorded and assessed by 2 blinded observers. A Wilcoxon signed-rank test was used to analyze recovery data. Heart rate, arterial blood pressures, and arterial blood gas data were analyzed using 2-way analysis of variance (ANOVA) for repeated measures. Values of P < 0.05 were considered significant. Duration of anesthesia was not different between groups. Administration of xylazine at the end of desflurane anesthesia was associated with significantly longer times to first movement, endotracheal tube removal, first attempt to achieve sternal recumbency, sternal recumbency, first attempt to stand, and standing. Number of attempts to stand and quality of recovery scores were not different between groups. Administering xylazine after desflurane anesthesia resulted in longer recovery times. Recovery scores were not significantly different between groups.

Recovery from desflurane anesthesia in horses with and without post-anesthetic xylazine

PubMed Central

Aarnes, Turi K.; Bednarski, Richard M.; Bertone, Alicia L.; Hubbell, John A.E.; Lerche, Phillip

2014-01-01

The objective of this study was to compare recovery from desflurane anesthesia in horses with or without post-anesthetic xylazine. Six adult horses were anesthetized on 2 occasions, 14 d apart using a prospective, randomized crossover design. Horses were sedated with xylazine, induced to lateral recumbency with ketamine and diazepam, and anesthesia was maintained with desflurane. One of 2 treatments was administered intravenously at the end of anesthesia: xylazine [0.2 mg/kg body weight (BW)] or an equivalent volume of saline. Recovery parameters were recorded and assessed by 2 blinded observers. A Wilcoxon signed-rank test was used to analyze recovery data. Heart rate, arterial blood pressures, and arterial blood gas data were analyzed using 2-way analysis of variance (ANOVA) for repeated measures. Values of P < 0.05 were considered significant. Duration of anesthesia was not different between groups. Administration of xylazine at the end of desflurane anesthesia was associated with significantly longer times to first movement, endotracheal tube removal, first attempt to achieve sternal recumbency, sternal recumbency, first attempt to stand, and standing. Number of attempts to stand and quality of recovery scores were not different between groups. Administering xylazine after desflurane anesthesia resulted in longer recovery times. Recovery scores were not significantly different between groups. PMID:24688171

Portuguese community pharmacists' attitudes to and knowledge of antibiotic misuse: questionnaire development and reliability.

PubMed

Roque, Fátima; Soares, Sara; Breitenfeld, Luiza; Gonzalez-Gonzalez, Cristian; Figueiras, Adolfo; Herdeiro, Maria Teresa

2014-01-01

To develop and evaluate the reliability of a self-administered questionnaire designed to assess the attitudes and knowledge of community pharmacists in Portugal about microbial resistance and the antibiotic dispensing process. This study was divided into the following three stages: (1) design of the questionnaire, which included a literature review and a qualitative study with focus-group sessions; (2) assessment of face and content validity, using a panel of experts and a pre-test of community pharmacists; and, (3) pilot study and reliability analysis, which included a test-retest study covering fifty practising pharmacists based at community pharmacies in five districts situated in Northern Portugal. Questionnaire reproducibility was quantified using the intraclass correlation coefficient (ICC; 95% confidence interval) computed by means of one-way analysis of variance (ANOVA). Internal consistency was evaluated using Cronbach's alpha. The correlation coefficients were fair to good (ICC>0.4) for all statements (scale-items) regarding knowledge of and attitudes to antibiotic resistance, and ranged from fair to good to excellent for statements about situations in which pharmacists acknowledged that antibiotics were sometimes dispensed without a medical prescription (ICC>0.8). Cronbach's alpha for this section was 0.716. The questionnaire designed in this study is valid and reliable in terms of content validity, face validity and reproducibility.

Shear bond strength of indirect composite material to monolithic zirconia

PubMed Central

2016-01-01

PURPOSE This study aimed to evaluate the effect of surface treatments on bond strength of indirect composite material (Tescera Indirect Composite System) to monolithic zirconia (inCoris TZI). MATERIALS AND METHODS Partially stabilized monolithic zirconia blocks were cut into with 2.0 mm thickness. Sintered zirconia specimens were divided into different surface treatment groups: no treatment (control), sandblasting, glaze layer & hydrofluoric acid application, and sandblasting + glaze layer & hydrofluoric acid application. The indirect composite material was applied to the surface of the monolithic zirconia specimens. Shear bond strength value of each specimen was evaluated after thermocycling. The fractured surface of each specimen was examined with a stereomicroscope and a scanning electron microscope to assess the failure types. The data were analyzed using one-way analysis of variance (ANOVA) and Tukey LSD tests (α=.05). RESULTS Bond strength was significantly lower in untreated specimens than in sandblasted specimens (P<.05). No difference between the glaze layer and hydrofluoric acid application treated groups were observed. However, bond strength for these groups were significantly higher as compared with the other two groups (P<.05). CONCLUSION Combined use of glaze layer & hydrofluoric acid application and silanization are reliable for strong and durable bonding between indirect composite material and monolithic zirconia. PMID:27555895

Association between menstruation signs and anxiety, depression, and stress in school girls in Mashhad in 2011-2012.

PubMed

Mohamadirizi, Soheila; Kordi, Masoumeh

2013-09-01

Menstruation signs are among the most common disorders in adolescents and are influenced by various environmental and psychosocial factors. This study aimed to define the association between menstruation signs and anxiety, depression, and stress in school girls in Mashhad in 2011-2012. This was a cross-sectional study on 407 high school girls in Mashhad who were selected through two-step random sampling. The students completed a questionnaire concerning demographic characteristics, menstruation, Depression, Anxiety, and Stress Scale of 21 questions (DASS-21), and menstruation signs in three phases of their menstruation. Data were analyzed by the statistical tests of Pearson correlation coefficient, Student's t-test, one-way analysis of variance (ANOVA), and regression through SPSS version 14. Based on the findings, 74% of the subjects reported pre-menstruation signs, 94% reported signs during bleeding, and 40.8% reported post-menstruation signs. About 44.3% of the subjects had anxiety, 45.5% had depression, and 47.2% had stress. In addition, Pearson correlation coefficient test showed a significant positive correlation between menstruation signs and depression, anxiety, and stress (P < 0.05). With regard to the association between menstruation signs and psycho-cognitive variables, prevention and treatment of these disorders by the authorities of education and training and the Ministry of Health are essential.

Efficient Scores, Variance Decompositions and Monte Carlo Swindles.

DTIC Science & Technology

1984-08-28

to ;r Then a version .of Pythagoras ’ theorem gives the variance decomposition (6.1) varT var S var o(T-S) P P0 0 0 One way to see this is to note...complete sufficient statistics for (B, a) , and that the standard- ized residuals a(y - XB) 6 are ancillary. Basu’s sufficiency- ancillarity theorem

Comparative study on bioremediation of heavy metals by solitary ascidian, Phallusia nigra, between Thoothukudi and Vizhinjam ports of India.

PubMed

Abdul Jaffar Ali, H; Tamilselvi, M; Akram, A Soban; Kaleem Arshan, M L; Sivakumar, V

2015-11-01

Ascidians belonging to the sub-phylum Uro-chordata are used as potential model organisms in various parts of the world for biosorption of metals. The sedentary nature, filter feeding habits, presence of vanadocytes and the absence of kidneys cause them to accumulate metals. The present study was aimed to compare biosorption of metals such as cadmium, copper, lead, mercury and vanadium in test and mantle body of solitary ascidian Phallusia nigra between two ecologically significant stations such as Thoothukudi (Station 1) and Vizhinjam (Station 2) ports of India. Monthly samplings of water and P. nigra were done for a period of one year from September 2010 to August 2011 and subjected to analysis of metal accumulation. The average metal concentrations except mercury in the Thoothukudi water were found to be higher of comparable magnitudes than the Vizhinjam water. One-way ANOVA showed significant differences between the stations. A comparison of average metal concentrations in the test and mantle body of P. nigra between two stations showed that the enrichment of V, Cd, Pb, Cu and Hg in the Thoothukudi samples may be due to high bioaccumulation factors of these elements as compared to other species of ascidians. The bioaccumulation factors were in the order of V>Pb>Cd>Cu> Hg for the test and mantle body in stations 1 and 2. Application of one-way ANOVA for the concentration of these metals between test and mantle body showed significant differences in both stations. Similarly, ANOVA for biosorption of these trace metals by P. nigra showed significant difference between stations. Metal concentrations recorded in this ascidian could effectively be used as good reference material for monitoring metal contamination in Indian sea waters. Copyright © 2015 Elsevier Inc. All rights reserved.

One-to-one teaching with pictures--flashcard health education for British Asians with diabetes.

PubMed Central

Hawthorne, K; Tomlinson, S

1997-01-01

BACKGROUND: Type 2 diabetes is up to four times more common in British Asians, but they know little about its management and complications. AIM: To design and evaluate a structured pictorial teaching programme for Pakistani Moslem patients in Manchester with type 2 diabetes. METHOD: A randomized controlled trial of pictorial flashcard one-to-one education in 201 patients attending a hospital outpatient clinic or diabetic clinics in ten general practices in Manchester. Patients' knowledge, self-caring skills and attitudes to diabetes were measured on four topics before the structured teaching, and compared with results six months later. RESULTS: All parameters of knowledge were increased in the study group; for example, percentage scores for correctly identifying different food values increased from 57% to 71% (Analysis of Variance (ANOVA) adjusted difference +11.8%) and knowledge of one diabetic complication from 18% to 78%. Self-caring behaviour improved, with 92% of patients doing regular glucose tests at six months compared with 63% at the start. Attitudinal views were more resistant to change, with patients still finding it hard to choose suitable foods at social occasions. Haemoglobin A1c control improved by 0.34% over six months (ANOVA adjusted difference, 95% CI -0.8% to +0.1%). CONCLUSION: It is concluded that this health education programme can empower Asian diabetics to take control of their diets, learn to monitor and interpret glucose results, and understand the implications of poor glycaemic control for diabetic complications. PMID:9219407

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tang, Kunkun, E-mail: ktg@illinois.edu; Inria Bordeaux – Sud-Ouest, Team Cardamom, 200 avenue de la Vieille Tour, 33405 Talence; Congedo, Pietro M.

The Polynomial Dimensional Decomposition (PDD) is employed in this work for the global sensitivity analysis and uncertainty quantification (UQ) of stochastic systems subject to a moderate to large number of input random variables. Due to the intimate connection between the PDD and the Analysis of Variance (ANOVA) approaches, PDD is able to provide a simpler and more direct evaluation of the Sobol' sensitivity indices, when compared to the Polynomial Chaos expansion (PC). Unfortunately, the number of PDD terms grows exponentially with respect to the size of the input random vector, which makes the computational cost of standard methods unaffordable formore » real engineering applications. In order to address the problem of the curse of dimensionality, this work proposes essentially variance-based adaptive strategies aiming to build a cheap meta-model (i.e. surrogate model) by employing the sparse PDD approach with its coefficients computed by regression. Three levels of adaptivity are carried out in this paper: 1) the truncated dimensionality for ANOVA component functions, 2) the active dimension technique especially for second- and higher-order parameter interactions, and 3) the stepwise regression approach designed to retain only the most influential polynomials in the PDD expansion. During this adaptive procedure featuring stepwise regressions, the surrogate model representation keeps containing few terms, so that the cost to resolve repeatedly the linear systems of the least-squares regression problem is negligible. The size of the finally obtained sparse PDD representation is much smaller than the one of the full expansion, since only significant terms are eventually retained. Consequently, a much smaller number of calls to the deterministic model is required to compute the final PDD coefficients.« less

A Design Selection Procedure.

ERIC Educational Resources Information Center

Kroeker, Leonard P.

The problem of blocking on a status variable was investigated. The one-way fixed-effects analysis of variance, analysis of covariance, and generalized randomized block designs each treat the blocking problem in a different way. In order to compare these designs, it is necessary to restrict attention to experimental situations in which observations…

Comparison of soymilk, powdered milk, Hank's balanced salt solution and tap water on periodontal ligament cell survival.

PubMed

Moazami, Fariborz; Mirhadi, Hosein; Geramizadeh, Bita; Sahebi, Safoura

2012-04-01

The purpose of this study was to evaluate the ability of soymilk, powdered milk, and Hank's balanced salt solution (HBSS) to maintain human periodontal ligament (PDL) cell viability in vitro. PDL cells were obtained from extracted healthy third molars and cultured in Dulbecco's modified Eagles medium (DMEM). The cultures were exposed for 1, 2, 4, and 8 h to experimental solutions (tap water served as negative control and DMEM as positive control) at 37°C. The viable cells were then counted using the trypan blue exclusion technique. Data were analyzed by using one-way anova, post hoc Scheffe and two-way anova test. Statistical analysis showed that HBSS, powdered baby formula, and soymilk maintain cell viability equally well in different periods of times. Tap water cannot keep cells viable as well as other solutions. Soymilk and powdered baby formula can be recommended as suitable storage media for avulsed teeth for up to 8 h. © 2011 John Wiley & Sons A/S.

Salt preference: age and sex related variability.

PubMed

Verma, Punam; Mittal, Sunita; Ghildiyal, Archana; Chaudhary, Lalita; Mahajan, K K

2007-01-01

Salt preference was assessed in 60 adults of 18-21 yrs of age (30 males and 30 females) and in 60 children of 7-12 yrs of age (30 boys and 30 girls). Subjects rated the preference on Likert scale for popcorns of five salt concentrations (OM, 1M, 2M, 3M and +3M). Statistical analysis using Two way ANOVA revealed statistically significant effect of age and sex on salt preference (F4,100 = 15.027, P < 0.01) and One Way ANOVA revealed statistically significant sex difference in salt preference of adults (F4,50 = 16.26, P < 0.01) but no statistically significant sex difference in salt preference of children (F4,50 = 4.08, P > 0.05). Dietary experiences during development and more physical activity in children may be responsible for higher salt preference in children while finding no sex variability in children favours the role of sex hormones in salt preference of male and females.

Bond strength durability of self-etching adhesives and resin cements to dentin.

PubMed

Chaves, Carolina de Andrade Lima; de Melo, Renata Marques; Passos, Sheila Pestana; Camargo, Fernanda Pelógia; Bottino, Marco Antonio; Balducci, Ivan

2009-01-01

To evaluate the microtensile bond strength (microTBS) of one- (Xeno III, Dentsply) and two-step (Tyrian-One Step Plus, Bisco) self-etching adhesive systems bonded to dentin and cemented to chemically cured (C&B Metabond) or light-cured paste of a dual-cure resin cement (Variolink II, Ivoclar) within a short (24 h) and long period of evaluation (90 days). Forty recently extracted human molars had their roots removed and their occlusal dentin exposed and ground wet with 600-grit SiC paper. After application of one of the adhesives, the resin cement was applied to the bonded surface and a composite resin block was incrementally built up to a height of 5 mm (n=10). The restored teeth were stored in distilled water at 37 degrees C for 7 days. The teeth were then cut along two axes (x and y), producing beam-shaped specimens with 0.8 mm(2) cross-sectional area, which were subjected to microTBS testing at a crosshead speed of 0.05 mm/min and stressed to failure after 24 h or 90 days of storage in water. The microTBS data in MPa were subjected to three-way analysis of variance and Tukey's test (alpha= 0.05). The interaction effect for all three factors was statistically significant (three-way ANOVA, p<0.001). All eight experimental means (MPa) were compared by the Tukey's test (p<0.05) and the following results were obtained: Tyrian-One Step Plus /C&B/24 h (22.4+/-7.3); Tyrian-One Step Plus /Variolink II/24 h (39.4+/-11.6); Xeno III/C&B/24 h (40.3+/-12.9); Xeno III/Variolink II/24 h (25.8+/-10.5); Tyrian-One Step Plus /C&B/90 d (22.1+/-12.8) Tyrian-One Step Plus/VariolinkII/90 d (24.2+/-14.2); Xeno III/C&B/90 d (27.0+/-13.5); Xeno III/Variolink II/90 d (33.0+/-8.9). Xeno III/Variolink II was the luting agent/adhesive combination that provided the most promising bond strength after 90 days of storage in water.

Interpreting Regression Results: beta Weights and Structure Coefficients are Both Important.

ERIC Educational Resources Information Center

Thompson, Bruce

Various realizations have led to less frequent use of the "OVA" methods (analysis of variance--ANOVA--among others) and to more frequent use of general linear model approaches such as regression. However, too few researchers understand all the various coefficients produced in regression. This paper explains these coefficients and their…

Exploring Preferences of Mentoring Activities among Generational Groups of Registered Nurses in Florida

ERIC Educational Resources Information Center

Posey-Goodwin, Patricia Ann

2013-01-01

The purpose of this study was to explore differences in perceptions of mentoring activities from four generations of registered nurses in Florida, using the Alleman Mentoring Activities Questionnaire ® (AMAQ ®). Statistical procedures of analysis of variance (ANOVA) were employed to explore differences among 65 registered nurses in Florida from…

Inquiring the Most Critical Teacher's Technology Education Competences in the Highest Efficient Technology Education Learning Organization

ERIC Educational Resources Information Center

Yung-Kuan, Chan; Hsieh, Ming-Yuan; Lee, Chin-Feng; Huang, Chih-Cheng; Ho, Li-Chih

2017-01-01

Under the hyper-dynamic education situation, this research, in order to comprehensively explore the interplays between Teacher Competence Demands (TCD) and Learning Organization Requests (LOR), cross-employs the data refined method of Descriptive Statistics (DS) method and Analysis of Variance (ANOVA) and Principal Components Analysis (PCA)…

The Effect of Flow Frequency on Internet Addiction to Different Internet Usage Activities

ERIC Educational Resources Information Center

Yang, Hui-Ling; Wu, Wei-Pang

2017-01-01

This study investigated the online flow frequency among college students in regard to different internet activities, and analyzed the effect of flow frequency on internet addiction. This study surveyed 525 undergraduate internet users in Taiwan by using convenience sampling to question participants. In this paper, analysis of variance (ANOVA) was…

The Influence of Ability Grouping on Math Achievement in a Rural Middle School

ERIC Educational Resources Information Center

Pritchard, Robert R.

2012-01-01

The researcher examined the academic performance of low-tracked students (n = 156) using standardized math test scores to determine whether there is a statistically significant difference in achievement depending on academic environment, tracked or nontracked. An analysis of variance (ANOVA) was calculated, using a paired samples t-test for a…

The Impact of Acculturation Strategy and Social Supports on Acculturative Stress and Academic Performance among Hispanic/Latino/a College Students

ERIC Educational Resources Information Center

Luciano, David

2012-01-01

This study examined the relationship between Acculturation Strategy and Social Supports on Acculturative Stress and Academic Performance Among Hispanic/Latino/a College students. The sample of approximately 522 students was recruited at the City College of The City University of New York. Various statistical methods, including one way ANOVAS,…

The Association between Working Memory and Educational Attainment as Measured in Different Mathematical Subtopics in the Swedish National Assessment: Primary Education

ERIC Educational Resources Information Center

Nyroos, Mikaela; Wiklund-Hornqvist, Carola

2012-01-01

The aim of this study was to examine the relationship between working memory capacity and mathematical performance measured by the national curriculum assessment in third-grade children (n = 40). The national tests concerned six subareas within mathematics. One-way ANOVA, two-tailed Pearson correlation and multiple regression analyses were…

On statistical analysis of factors affecting anthocyanin extraction from Ixora siamensis

NASA Astrophysics Data System (ADS)

Mat Nor, N. A.; Arof, A. K.

2016-10-01

This study focused on designing an experimental model in order to evaluate the influence of operative extraction parameters employed for anthocyanin extraction from Ixora siamensis on CIE color measurements (a*, b* and color saturation). Extractions were conducted at temperatures of 30, 55 and 80°C, soaking time of 60, 120 and 180 min using acidified methanol solvent with different trifluoroacetic acid (TFA) contents of 0.5, 1.75 and 3% (v/v). The statistical evaluation was performed by running analysis of variance (ANOVA) and regression calculation to investigate the significance of the generated model. Results show that the generated regression models adequately explain the data variation and significantly represented the actual relationship between the independent variables and the responses. Analysis of variance (ANOVA) showed high coefficient determination values (R2) of 0.9687 for a*, 0.9621 for b* and 0.9758 for color saturation, thus ensuring a satisfactory fit of the developed models with the experimental data. Interaction between TFA content and extraction temperature exhibited to the highest significant influence on CIE color parameter.

Association between playing computer games and mental and social health among male adolescents in Iran in 2014.

PubMed

Mohammadi, Mehrnoosh; RezaeiDehaghani, Abdollah; Mehrabi, Tayebeh; RezaeiDehaghani, Ali

2016-01-01

As adolescents spend much time on playing computer games, their mental and social effects should be considered. The present study aimed to investigate the association between playing computer games and the mental and social health among male adolescents in Iran in 2014. This is a cross-sectional study conducted on 210 adolescents selected by multi-stage random sampling. Data were collected by Goldberg and Hillier general health (28 items) and Kiez social health questionnaires. The association was tested by Pearson and Spearman correlation coefficients, one-way analysis of variance (ANOVA), and independent t-test. Computer games related factors such as the location, type, length, the adopted device, and mode of playing games were investigated. Results showed that 58.9% of the subjects played games on a computer alone for 1 h at home. Results also revealed that the subjects had appropriate mental health and 83.2% had moderate social health. Results showed a poor significant association between the length of games and social health (r = -0.15, P = 0.03), the type of games and mental health (r = -0.16, P = 0.01), and the device used in playing games and social health (F = 0.95, P = 0.03). The findings showed that adolescents' mental and social health is negatively associated with their playing computer games. Therefore, to promote their health, educating them about the correct way of playing computer games is essential and their parents and school authorities, including nurses working at schools, should determine its relevant factors such as the type, length, and device used in playing such games.

The Stability of Perceived Pubertal Timing across Adolescence

PubMed Central

Cance, Jessica Duncan; Ennett, Susan T.; Morgan-Lopez, Antonio A.; Foshee, Vangie A.

2011-01-01

It is unknown whether perceived pubertal timing changes as puberty progresses or whether it is an important component of adolescent identity formation that is fixed early in pubertal development. The purpose of this study is to examine the stability of perceived pubertal timing among a school-based sample of rural adolescents aged 11 to 17 (N=6,425; 50% female; 53% White). Two measures of pubertal timing were used, stage-normative, based on the Pubertal Development Scale, a self-report scale of secondary sexual characteristics, and peer-normative, a one-item measure of perceived pubertal timing. Two longitudinal methods were used: one-way random effects ANOVA models and latent class analysis. When calculating intraclass correlation coefficients using the one-way random effects ANOVA models, which is based on the average reliability from one time point to the next, both measures had similar, but poor, stability. In contrast, latent class analysis, which looks at the longitudinal response pattern of each individual and treats deviation from that pattern as measurement error, showed three stable and distinct response patterns for both measures: always early, always on-time, and always late. Study results suggest instability in perceived pubertal timing from one age to the next, but this instability is likely due to measurement error. Thus, it may be necessary to take into account the longitudinal pattern of perceived pubertal timing across adolescence rather than measuring perceived pubertal timing at one point in time. PMID:21983873

Plasticity and Activation of Spared Intraspinal Respiratory Circuits Following Spinal Cord Injury

DTIC Science & Technology

2017-12-01

ipsilateral to the C2Hx lesion. Tracheal pressures were evaluated to explore the potential of a biomechanical impact of ISMS- induced muscle contract...different from 500 µA. %P 0.05, different from 2 wk at same stimulus current. Data were evaluated using 2-way repeated-measures ANOVA with Holm...outcomes assessed. Data were evaluated using 2-way repeated-measures ANOVA with Holm-Sidak post hoc tests for individual comparisons (groups: 2

Effects of metacognitive instruction on the academic achievement of students in the secondary sciences

NASA Astrophysics Data System (ADS)

Bianchi, Gregory A.

The purpose of this study was to investigate the effects of reflective assessment in the form of situated metacognitive prompts on student achievement in the secondary sciences. A second goal was to determine whether specific gender differences existed in terms of student responsiveness to the metacognitive interventions. Participants in the study consisted of a convenience sample from a population of ninth-grade honors biology students in a large suburban school district located near Seattle, Washington. Beyond answering the specific research questions raised in this study, an additional aim was to broaden the growing body of research pertaining to the effect of metacognition on student achievement. A quasi-experimental, non-equivalent control group design was employed in this study. Descriptive and inferential statistics were computed to address the specific research questions raised. Specifically, a three-way repeated-measures ANOVA was performed. For this purpose, a single within-subjects factor, termed Testing, was defined. Three levels were allocated to this factor, and quantitative data from the Pretest, Posttest, and Retention Test were assigned to the levels, respectively. Group and Gender were defined as between-subjects factors, and both were allocated two levels; the two Group levels were Reflective and Non-Reflective. The effects of Group and Gender on each of the three quantitative measures were examined singly and in interaction with each other. Tests of statistical significance were analyzed at the .05 level. There was a statistically significant effect for Group (Reflective, Non-Reflective) by Testing (Pretest, Posttest, Retention Test). A three-way repeated-measures ANOVA procedure revealed that students in the Reflective group outperformed students in the Non-Reflective group (F = 10.258, p = .002, Partial eta 2 = .088). According to the effect size estimate, almost 9% of variance in the Testing variable was attributable to the Group variable. There was not a significant interaction effect for Gender. A three-way repeated-measures ANOVA procedure revealed that Testing X Group X Gender did not yield a statistically significant F ratio (F = 1.471, p = .228, Partial eta2 = .014). Students in the Reflective group outperformed students in the Non-Reflective group, regardless of gender. The findings of this study offer modest evidence that reflective assessment in the form of situated metacognitive prompts may improve student academic outcomes at the secondary level. This study failed to provide a significant finding regarding gender-related variation in a metacognitive learning cycle.

Factors associated with postpartum weight retention in a Brazilian cohort.

PubMed

Zanotti, Joana; Capp, Edison; Wender, Maria Celeste Osório

2015-04-01

To identify the factors associated with weight retention after pregnancy. A cohort study was performed with 145 women receiving maternity care at a hospital in Caxias do Sul, Rio Grande do Sul, Brazil, aged 19 to 45 years, between weeks 38 and 42 of pregnancy. The patients were evaluated at one month, three months, and six months after delivery. Student's t-test or one-way analysis of variance (ANOVA) was used to compare groups, as indicated; correlations were assessed with Pearson's and Spearman's tests, as indicated; to identify and evaluate confounders independently associated with total weight loss, a multivariate linear regression analysis was performed and statistical significance was set at p ≤ 0.05. There was a significant positive association between total weight gain - and a negative association with physical exercise during pregnancy - with total weight loss. Higher parity, inter-pregnancy interval, calorie intake, pre-pregnancy body mass index (BMI), weight gain related to pre-pregnancy BMI, presence and severity of depression, and lack of exclusive breastfeeding were directly associated with lower weight loss. Among nominal variables, level of education and marital status were significantly associated with total weight loss. In the present study, lower weight retention in the postpartum period was associated with higher educational attainment and with being married. Normal or below-normal pre-pregnancy BMI, physical activity and adequate weight gain during pregnancy, lower parity, exclusive breastfeeding for a longer period, appropriate or low calorie intake, and absence of depression were also determinants of reduced weight retention.

Museum-based learning: Informal learning settings and their role in student motivation and achievement in science

NASA Astrophysics Data System (ADS)

Holmes, Julie Ann

This study examined changes in student motivation and achievement in science in relationship with a visit to the IDEA Place Experiment Gallery. The study was based on the pretest-posttest control comparison group design with four treatment groups: control, exhibit, lesson, and exhibit/lesson. The sample was 228 sixth grade students from a public north central Louisiana school who were randomly assigned to one of the four experimental groups. Pretest, posttest, and delayed posttest measures of intrinsic motivation and achievement in science were determined using the Children's Academic Intrinsic Motivation Inventory and an achievement test written to measure areas of science incorporated in the Experiment Gallery exhibits. The data were analyzed using a one way Analysis of Variance (ANOVA), dependent t tests, and Pearson r. Statistical analysis revealed: (a) no significant differences in motivation or achievement on pretest and posttest scores between groups and, (b) no significant relationships between motivation level and achievement between groups on the posttest. Significant differences were found within groups for (a) the lesson group in motivation, and (b) the exhibit group in achievement from pretest to posttest and from posttest to delayed posttest. A significant relationship between level of motivation and science achievement was revealed for the exhibit group on the delayed posttests. There were no other significant findings to support that the effects of the treatment led to any long term effects on motivation or achievement within any of the four experimental groups.

The relationship between post traumatic stress disorder and post traumatic growth: gender differences in PTG and PTSD subgroups.

PubMed

Jin, Yuchang; Xu, Jiuping; Liu, Dongyue

2014-12-01

This study investigated the post traumatic stress disorder (PTSD) and post traumatic growth (PTG) in 2,300 earthquake survivors 1 year after the 2008 Wenchuan earthquake. This study aimed to investigate the relationship between PTSD and PTG and also tested for the gender differences in PTSD and PTG subgroups. A stratification random sampling strategy and questionnaires were used to collect the data. The PTSD was assessed using the PTSD Check list-Civilian and the PTG was assessed using the Post traumatic growth inventory. 2,300 individuals were involved in the initial survey with 2,080 completing the final questionnaire, a response rate of 90.4%. One-way ANOVA analyses were performed to investigate the gender differences in the PTSD and PTG subgroups. One year following the earthquake, 40.1 and 51.1% of survivors reported PTSD and PTG, respectively. A bivariate correlation analysis indicated that there was a positive association between PTG and PTSD. The PTG and PTSD variance analysis conducted on female and male subgroups suggested that women were more affected than men. Given the relatively high PTG prevalence, it was concluded that researchers need to pay more attention to the positive outcomes of an earthquake rather than just focusing on the negative effects. The surveys and analyses indicated that psychological intervention and care for the earthquake disaster survivors should focus more on females and older people, who tend to be more adversely affected.

Reliability and number of trials of Y Balance Test in adolescent athletes.

PubMed

Linek, Pawel; Sikora, Damian; Wolny, Tomasz; Saulicz, Edward

2017-10-01

The Star Excursion Balance Test (SEBT) is commonly used to evaluate dynamic equilibrium. The Y Balance Test (Y-BT) is a shortened version of the SEBT where a Y- Balance Kit is commonly used. To date, research concerning the protocol and reliability of the SEBT and Y-BT has been conducted only for adults. The aim of the study was to assess the protocol (the necessary number of trials to stabilize the results) and reliability of the Y-BT in adolescent athletes. One-way repeated-measures analysis of variance (ANOVA) and reliability study. The sample of 38 athletes (mean age: 15.6 years) was selected from a football club. A Y-Balance test kit was applied for the evaluation of dynamic balance. The analysis used the values normalized to the relative length of the lower limbs. After six attempts, three consecutive ones achieved stability for all directions and both extremities (p > 0.05). The intraclass correlation coefficient (ICC 3,1 ), standard error of measurement and minimal detectable change values for the three attempts ranged from 0.57 to 0.82, from 3 to less than 6% and from 7.68 to 13.7%, respectively. In the study of adolescent dynamic equilibrium using the Y-BT, it is recommended to perform nine attempts (including six trial attempts and three measurements). In order to increase reliability it is recommended that the average of the three measured attempts is analysed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Comparison of the in vitro Effect of Chemical and Herbal Mouthwashes on Candida albicans

PubMed Central

Talebi, Somayeh; Sabokbar, Azar; Riazipour, Majid; Saffari, Mohsen

2014-01-01

Background: During the recent decades research has focused to find scientific evidence for the effects of herbal medicines. Researchers are interested in herbal remedies for medication and aim to substitute herbal material instead of chemical formula with limited side effects for human being. Objectives: The aim of the current study was to compare the in vitro effect of herbal and chemical mouthwashes against Candida albicans. Materials and Methods: In this research, we used a standard strain of C. albicans, PTCC 5027. The suspension was made by a fresh culture of C. albicans (24 hours) and the optical density (turbidity equating to a McFarland standard of 0.5) was read at 530 nm. The C. albicans suspension was cultured on Sabouraud dextrose agar plate. Next, two wells were filled with mouthwashes and after incubation at 30ºC for 24 hours, the inhibition zone was measured. Minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC) of mouthwashes were determined. Data were analyzed using the SPSS software, independent T-tests and one-sided variance analysis (ANOVA-one way). Results: Based on these findings on agar diffusion with (P = 0.764), MIC and MFC tests (P = 0.879), there were no significant differences between the antifungal effect of herbal and chemical mouthwashes. Conclusions: This study showed that, chemical mouthwashes acted better than herbal mouthwashes and among different chemical mouthwashes, Oral B was most effective. PMID:25741429

Selected anthropometric indices of maritime university students.

PubMed

Rębacz-Maron, Ewa

2015-01-01

Overweight and obesity during working life are becoming an increasingly serious challenge to various professional groups where recruits and personnel must be healthy and fit. Marine recruitment, even at the training stage, should be open to applicants who meet health and fitness criteria. The objective of the study is to determine the overweight and adiposity rates among seafarer candidates (n = 368). Based on anthropometric measurements and somatic indices the extent of obesity among marine students/ /future seafarers was investigated. In the groups identified according to the year of study, arithmetic averages (SD - standard deviation) were calculated for somatometric characteristics, and were then used to analyse the phenomena of overweight and obesity. The comparison was performed using the Kruskal-Wallis test, one-way analysis of variance (ANOVA) by ranks. The highest average body mass index (BMI) score was found in fourth-year students (mean BMI 25.7 ± 2.8). The average BMI for years one and two was in the upper range of 'healthy' weight. In 24.0% of first-year students and 32.2% of second-year students, the waist circumference was higher than half of the body height. Body fat percentage results indicate that this feature is highly variable, with a strong upward trend. Findings regarding overweight among future seamen give cause for concern. The participants of the study were characterised by excessive weight and adiposity. Recruitment criteria for uniformed services are not as restrictive as they used to be, as it is getting increasingly more difficult to find sufficiently slim and fit applicants.

Effect of single-dose low-level helium-neon laser irradiation on orthodontic pain: a split-mouth single-blind placebo-controlled randomized clinical trial.

PubMed

Sobouti, Farhad; Khatami, Maziar; Chiniforush, Nasim; Rakhshan, Vahid; Shariati, Mahsa

2015-01-01

Pain is the most common complication of orthodontic treatment. Low-level laser therapy (LLLT) has been suggested as a new analgesic treatment free of the adverse effects of analgesic medications. However, it is not studied thoroughly, and the available studies are quite controversial. Moreover, helium neon (He-Ne) laser has not been assessed before. This split-mouth placebo-controlled randomized clinical trial was performed on 16 male and 14 female orthodontic patients requiring bilateral upper canine retraction. The study was performed at a private clinic in Sari, Iran, in 2014. It was single blind: patients, orthodontist, and personnel were blinded of the allocations, but the laser operator (periodontist) was not blinded. Once canine retractor was activated, a randomly selected maxillary quarter received a single dose of He-Ne laser irradiation (632.8 nm, 10 mw, 6 j/cm(2) density). The other quarter served as the placebo side, treated by the same device but powered off. In the first, second, fourth, and seventh days, blinded patients rated their pain sensed on each side at home using visual analog scale (VAS) questionnaires. There was no harm identified during or after the study. Pain changes were analyzed using two- and one-way repeated-measures ANOVA, Bonferroni, and t-test (α = 0.01, β > 0.99). This trial was not registered. It was self-funded by the authors. Sixteen males and 11 females remained in the study (aged 12-21). Average pain scores sensed in all 4 intervals on control and laser sides were 4.06 ± 2.85 and 2.35 ± 1.77, respectively (t-test P < 0.0001). One-way ANOVA showed significant pain declines over time, in each group (P < 0.0001). Two-way ANOVA showed significant effects for LLLT (P < 0.0001) and time (P = <0.0001). Single-dose He-Ne laser therapy might reduce orthodontic pain caused by retracting maxillary canines.

Modified Team-Based Learning in an Ophthalmology Clerkship in China

PubMed Central

Zhou, Yuxian; Ao, Yong; Xin, Wei; Jia, Yu; Yang, Ying; Cai, Yu; Xu, Chaochao; Yang, Yangfan; Lin, Haotian

2016-01-01

Objective Team-based learning (TBL) is an increasingly popular teaching method in medical education. However, TBL hasn’t been well-studied in the ophthalmology clerkship context. This study was to examine the impact of modified TBL in such context and to assess the student evaluations of TBL. Methods Ninety-nine students of an 8-year clinical medicine program from Zhongshan Ophthalmic Centre, Sun Yat-sen University, were randomly divided into four sequential units and assigned to six teams with the same faculty. The one-week ophthalmology clerkship module included traditional lectures, gross anatomy and a TBL module. The effects of the TBL module on student performance were measured by the Individual Readiness Assurance Test (IRAT), the Group Readiness Assurance Test (GRAT), the Group Application Problem (GAP) and final examination scores (FESs). Students’ evaluations of TBL were measured by a 16-item questionnaire. IRAT and GRAT scores were compared using a paired t-test. One-way analysis of variance (ANOVA) and subgroup analysis compared the effects among quartiles that were stratified by the Basic Ophthalmology Levels (BOLs). The BOLs were evaluated before the ophthalmology clerkship. Results In TBL classes, the GRAT scores were significantly higher than the IRAT scores in both the full example and the BOL-stratified groups. It highlighted the advantages of TBL compared to the individual learning. Quartile-stratified ANOVA comparisons showed significant differences at FES scores (P < 0.01). In terms to IRAT, GRAT and GAP scores, there was no significant result. Moreover, IRAT scores only significantly differed between the first and fourth groups. The FES scores of the first three groups are significantly higher than the fourth group. Gender-specific differences were significant in FES but not the IRAT. Overall, 57.65% of student respondents agreed that TBL was helpful. Male students tended to rate TBL higher than female students. Conclusion The application of modified TBL to the ophthalmology clerkship curriculum improved students’ performance and increased students’ engagement and satisfaction. TBL should be further optimized and developed to enhance the educational outcomes among multi-BOLs medical students. PMID:27100286

An investigative comparison of purging and non-purging groundwater sampling methods in Karoo aquifer monitoring wells

NASA Astrophysics Data System (ADS)

Gomo, M.; Vermeulen, D.

2015-03-01

An investigation was conducted to statistically compare the influence of non-purging and purging groundwater sampling methods on analysed inorganic chemistry parameters and calculated saturation indices. Groundwater samples were collected from 15 monitoring wells drilled in Karoo aquifers before and after purging for the comparative study. For the non-purging method, samples were collected from groundwater flow zones located in the wells using electrical conductivity (EC) profiling. The two data sets of non-purged and purged groundwater samples were analysed for inorganic chemistry parameters at the Institute of Groundwater Studies (IGS) laboratory of the Free University in South Africa. Saturation indices for mineral phases that were found in the data base of PHREEQC hydrogeochemical model were calculated for each data set. Four one-way ANOVA tests were conducted using Microsoft excel 2007 to investigate if there is any statistically significant difference between: (1) all inorganic chemistry parameters measured in the non-purged and purged groundwater samples per each specific well, (2) all mineral saturation indices calculated for the non-purged and purged groundwater samples per each specific well, (3) individual inorganic chemistry parameters measured in the non-purged and purged groundwater samples across all wells and (4) Individual mineral saturation indices calculated for non-purged and purged groundwater samples across all wells. For all the ANOVA tests conducted, the calculated alpha values (p) are greater than 0.05 (significance level) and test statistic (F) is less than the critical value (Fcrit) (F < Fcrit). The results imply that there was no statistically significant difference between the two data sets. With a 95% confidence, it was therefore concluded that the variance between groups was rather due to random chance and not to the influence of the sampling methods (tested factor). It is therefore be possible that in some hydrogeologic conditions, non-purged groundwater samples might be just as representative as the purged ones. The findings of this study can provide an important platform for future evidence oriented research investigations to establish the necessity of purging prior to groundwater sampling in different aquifer systems.

The 1 Repetition Maximum Mechanics of a High-Handle Hexagonal Bar Deadlift Compared With a Conventional Deadlift as Measured by a Linear Position Transducer.

PubMed

Lockie, Robert G; Moreno, Matthew R; Lazar, Adrina; Risso, Fabrice G; Liu, Tricia M; Stage, Alyssa A; Birmingham-Babauta, Samantha A; Torne, Ibett A; Stokes, John J; Giuliano, Dominic V; Davis, DeShaun L; Orjalo, Ashley J; Callaghan, Samuel J

2018-01-01

Lockie, RG, Moreno, MR, Lazar, A, Risso, FG, Liu, TM, Stage, AA, Birmingham-Babauta, SA, Torne, IA, Stokes, JJ, Giuliano, DV, Davis, DL, Orjalo, AJ, and Callaghan, SJ. The 1 repetition maximum mechanics of a high-handle hexagonal bar deadlift compared with a conventional deadlift as measured by a linear position transducer. J Strength Cond Res 32(1): 150-161, 2018-The high-handle hexagonal bar deadlift (HHBD), a variation of the conventional deadlift (CD), is said to reduce the lift range of motion, which may change the mechanics of the lift. However, no research has investigated this. This study compared the mechanics between a 1 repetition maximum (1RM) CD and HHBD. Thirty-one strength-trained subjects (21 men, 10 women) completed a 1RM CD and HHBD. A linear position transducer measured lift distance, duration, and work; and peak and mean power, velocity, and force. The presence of a sticking region (SR) was determined for each lift. A repeated-measures analysis of variance (ANOVA) calculated differences between 1RM CD and HHBD mechanics. A one-way ANOVA compared the mechanics of each lift between subjects who exhibited an SR or not, and the SR between the CD and HHBD. Significance was set at p < 0.01. Subjects lifted a greater load in the HHBD (154.50 ± 45.29 kg) compared with the CD (134.72 ± 40.63 kg). Lift distance and duration were 22 and 25% shorter during the 1RM HHBD, respectively. The HHBD featured greater peak power and velocity, and peak and mean force; more work was done in the CD. Most subjects did not exhibit a CD (68%) or HHBD (77%) SR. There were no differences in CD or HHBD mechanics between subjects with or without an SR, and no differences in SR region distance or duration between the CD and HHBD. Greater force can be generated in the HHBD, which could have implications for strength-training adaptations over time.

Do men and their wives see it the same way? Congruence within couples during the first year of prostate cancer.

PubMed

Ezer, Hélène; Chachamovich, Juliana L Rigol; Chachamovich, Eduardo

2011-02-01

The purpose of this study was to determine the psychosocial adjustment congruence within couples through the first year of prostate cancer experience, and to explore the personal variables that could predict congruence within couples. Eighty-one couples were interviewed at the time of diagnosis; 69 participated at 3 months and 61 at 12 months. Paired t-tests were used to examine dyadic congruence on seven domains of psychosocial adjustment. Repeated Measures ANOVAs were used to examine the congruence over time. Multiple regressions were used to determine whether mood disturbance, urinary and sexual bother, sense of coherence, and social support were predictors of congruence within couples on each of the adjustment domains. At time 1, couples had incongruent perceptions in 3 of 7 domains: health care, psychological, and social adjustment. Three months later, health care, psychological, and sexual domains showed incongruence within couples. One year after the diagnosis, there were incongruent perceptions only in sexual and psychological domains. There was little variation of the congruence within couples over time. Husbands and wives' mood disturbance, urinary and sexual bother, sense of coherence, and social support accounted for 25-63% of variance in couple congruence in the adjustment domains in the study periods. The findings suggested that there is couple congruence. Domains in which incongruence was observed are important targets for clinical interventions. Greater attention needs to be directed to assisting couples to recognize the differences between their perceptions, especially the ones related to the sexual symptoms and psychological distress. Copyright © 2010 John Wiley & Sons, Ltd.

Inhibition of demineralization around the enamel-dentin/restoration interface after dentin pretreatment with TiF4 and self-etching adhesive systems.

PubMed

Bridi, Enrico Coser; do Amaral, Flávia Lucisano Botelho; França, Fabiana Mantovani Gomes; Turssi, Cecilia Pedroso; Basting, Roberta Tarkany

2016-05-01

The objective of this study was to evaluate the inhibition of demineralization around enamel-dentin/restoration interface after dentin pretreatment with 2.5% titanium tetrafluoride (TiF4). Forty dental class V cavities at the cementoenamel junction were distributed into four groups (n = 10), according to the presence or absence of TiF4 and to the adhesive system (Clearfil SE Bond/CL and Adper EasyOne/AD), and restored with a resin composite. A dynamic pH cycling model was used to induce the development of artificial caries lesions. After sectioning the dental blocks, Knoop microhardness tests were performed at different depths (20, 40, and 60 μm from the occlusal margin of the restoration) and at different distances (100, 200, and 300 μm from the adhesive interface). Repeated measures three-way analysis of variance (ANOVA) and Tukey's test were used (α = 0.05). For enamel, there were no differences in the microhardness values for CL, AD, and TiF4-AD at depths, regardless of the distances. Considering each depth, there were no significant differences among treatments. For dentin, ANOVA showed no significant interaction among the independent variables treatment*distance*depth (p = 0.994), no significant interaction between treatment*depth (p = 0.722), no significant interaction between treatment*distance (p = 0.265), no significant interaction between depth*distance (p = 0.365), and no significant effect on treatment (p = 0.151), depth (p = 0.067), or distance (p = 0.251). Dentin pretreatment of the cavity walls with TiF4 before self-etching adhesive systems was not effective in inhibiting demineralization around the enamel-dentin/restoration interfaces. The mechanism of incorporating fluoride in enamel and dentin of the cavity walls to inhibit demineralization around restorations seems ineffective when using TiF4 as a dentin pretreatment.

Metal distribution in urban soil around steel industry beside Queen Alia Airport, Jordan.

PubMed

Al-Khashman, Omar A; Shawabkeh, Reyad A

2009-12-01

The objective of this study was to assess the extent and severity of metal contamination in urban soil around Queen Alia Airport, Jordan. Thirty-two soil samples were collected around steel manufacturing plants located in the Al-Jiza area, south Jordan, around the Queen Alia Airport. The samples were obtained at two depths, 0-10 and 10-20 cm, and were analyzed by atomic absorption spectrophotometry for lead (Pb), zinc (Zn), cadmium (Cd), iron (Fe), copper (Cu) and chromium (Cr) levels. The physicochemical factors believed to affect the mobility of metals in the soil of the study area were also examined, including pH, electrical conductivity, total organic matter, calcium carbonate (CaCO(3)) content and cation exchange capacity. The high concentrations of Pb, Zn and Cd in the soil samples were found to be related to anthropogenic sources, such as the steel manufacturing plants, agriculture and traffic emissions, with the highest concentrations of these metals close to the site of the steel plants; in contrast the concentration of Cr was low in the soil sampled close to the steel plants. The metals were concentrated in the surface soil, and concentrations decreased with increasing depth, reflecting the physical properties of the soil and its alkaline pH. The mineralogical composition of the topsoil, identified by X-ray diffraction, was predominantly quartz, calcite, dolomite and minor minerals, such as gypsum and clay minerals. Metal concentrations were compared using one-way analysis of variance (ANOVA) to compute the statistical significance of the mean. The results of the ANOVA showed significant differences between sites for Pb, Cd and Cu, but no significant differences for the remaining metals tested. Factor analysis revealed that polluted soil occurs predominantly at sites around the steel plants and that there is no significant variation in the characteristics of the unpolluted soil, which are uniform in the study area.

Collaborative group work: effects of group size and assignment structure on learning gain, student satisfaction and perceived participation.

PubMed

Kooloos, Jan G M; Klaassen, Tim; Vereijken, Mayke; Van Kuppeveld, Sascha; Bolhuis, Sanneke; Vorstenbosch, Marc

2011-01-01

Collaborative group sessions in Nijmegen include 15 students who work all together on a group assignment. Sometimes, the group is split-up in three and every subgroup elaborates a part of the assignment. At the end, they peer-teach each other. It is believed that the split-up enhances participation and therefore learning gain. To establish the effect of group size and structure of the assignment on the perceived participation, the satisfaction and learning gain of collaborative group sessions. In this study, 27 groups of 15 students were equally divided into: A-group: all 15 students working on the complete assignment. B-group: subgroups of 5 students working on the complete assignment. C-group: subgroups of 5 students working on a smaller part, and peer-teaching each other at the end of the group session. All students took a pre-test, a post-test and a follow-up test and completed a questionnaire. Questionnaires were analyzed with a one-way analysis of variance (ANOVA) and post hoc by multiple comparisons. Learning gain was analyzed using a repeated measures ANOVA. A group size effect is observed in favor of working in subgroups. Perceived participation of the students differs between A and B (p ≤ 0.001) and between A and C (p ≤ 0.001), but not between B and C. Also, an assignment effect is found in favor of the smaller assignment combined with peer-teaching. The students' satisfaction differs between A and C (p ≤ 0.003) and between B and C (p ≤ 0.001), but not between A and B. The C-group also shows higher test results (p ≤ 0.043). The students prefer smaller groups as well as smaller assignments including peer-teaching. A possible larger learning gain of this format needs to be re-investigated.

Pharmacokinetic analysis and comparison of caffeine administered rapidly or slowly in coffee chilled or hot versus chilled energy drink in healthy young adults.

PubMed

White, John R; Padowski, Jeannie M; Zhong, Yili; Chen, Gang; Luo, Shaman; Lazarus, Philip; Layton, Matthew E; McPherson, Sterling

2016-01-01

There is a paucity of data describing the impact of type of beverage (coffee versus energy drink), different rates of consumption and different temperature of beverages on the pharmacokinetic disposition of caffeine. Additionally, there is concern that inordinately high levels of caffeine may result from the rapid consumption of cold energy drinks. The objective of this study was to compare the pharmacokinetics of caffeine under various drink temperature, rate of consumption and vehicle (coffee versus energy drink) conditions. Five caffeine (dose = 160 mg) conditions were evaluated in an open-label, group-randomized, crossover fashion. After the administration of each caffeine dose, 10 serial plasma samples were harvested. Caffeine concentration was measured via liquid chromatography-mass spectrometry (LC-MS), and those concentrations were assessed by non-compartmental pharmacokinetic analysis. The calculated mean pharmacokinetic parameters were analyzed statistically by one-way repeated measures analysis of variance (RM ANOVA). If differences were found, each group was compared to the other by all pair-wise multiple comparison. Twenty-four healthy subjects ranging in age from 18 to 30 completed the study. The mean caffeine concentration time profiles were similar with overlapping SDs at all measured time points. The ANOVA revealed significant differences in mean Cmax and Vd ss/F, but no pair-wise comparisons reached statistical significance. No other differences in pharmacokinetic parameters were found. The results of this study are consistent with previous caffeine pharmacokinetic studies and suggest that while rate of consumption, temperature of beverage and vehicle (coffee versus energy drink) may be associated with slightly different pharmacokinetic parameters, the overall impact of these variables is small. This study suggests that caffeine absorption and exposure from coffee and energy drink is similar irrespective of beverage temperature or rate of consumption.

Effect of mixing scanner types and reconstruction kernels on the characterization of lung parenchymal pathologies: emphysema, interstitial pulmonary fibrosis and normal non-smokers

NASA Astrophysics Data System (ADS)

Xu, Ye; van Beek, Edwin J.; McLennan, Geoffrey; Guo, Junfeng; Sonka, Milan; Hoffman, Eric

2006-03-01

In this study we utilize our texture characterization software (3-D AMFM) to characterize interstitial lung diseases (including emphysema) based on MDCT generated volumetric data using 3-dimensional texture features. We have sought to test whether the scanner and reconstruction filter (kernel) type affect the classification of lung diseases using the 3-D AMFM. We collected MDCT images in three subject groups: emphysema (n=9), interstitial pulmonary fibrosis (IPF) (n=10), and normal non-smokers (n=9). In each group, images were scanned either on a Siemens Sensation 16 or 64-slice scanner, (B50f or B30 recon. kernel) or a Philips 4-slice scanner (B recon. kernel). A total of 1516 volumes of interest (VOIs; 21x21 pixels in plane) were marked by two chest imaging experts using the Iowa Pulmonary Analysis Software Suite (PASS). We calculated 24 volumetric features. Bayesian methods were used for classification. Images from different scanners/kernels were combined in all possible combinations to test how robust the tissue classification was relative to the differences in image characteristics. We used 10-fold cross validation for testing the result. Sensitivity, specificity and accuracy were calculated. One-way Analysis of Variances (ANOVA) was used to compare the classification result between the various combinations of scanner and reconstruction kernel types. This study yielded a sensitivity of 94%, 91%, 97%, and 93% for emphysema, ground-glass, honeycombing, and normal non-smoker patterns respectively using a mixture of all three subject groups. The specificity for these characterizations was 97%, 99%, 99%, and 98%, respectively. The F test result of ANOVA shows there is no significant difference (p <0.05) between different combinations of data with respect to scanner and convolution kernel type. Since different MDCT and reconstruction kernel types did not show significant differences in regards to the classification result, this study suggests that the 3-D AMFM can be generally introduced.

Degree of cure and fracture properties of experimental acid-resin modified composites under wet and dry conditions

PubMed Central

López-Suevos, Francisco; Dickens, Sabine H.

2008-01-01

Objective Evaluate the effects of core structure and storage conditions on the mechanical properties of acid-resin modified composites and a control material by three-point bending and conversion measurements 15 min and 24 h after curing. Methods The monomers pyromellitic dimethacrylate (PMDM), biphenyldicarboxylic-acid dimethacrylate (BPDM), (isopropylidene-diphenoxy)bis(phthalic-acid) dimethacrylate (IPDM), oxydiphthalic-acid dimethacrylate (ODPDM), and Bis-GMA were mixed with triethyleneglycol dimethacrylate (TEGDMA) in a 40/60 molar ratio, and photo-activated. Composite bars (Barium-oxide-glass/resin = 3/1 mass ratio, (2 × 2 × 25) mm, n = 5) were light-cured for 1 min per side. Flexural strength (FS), elastic modulus (E), and work-of-fracture (WoF) were determined in three-point bending after 15 min (stored dry); and after 24 h under dry and wet storage conditions at 37 °C. Corresponding degrees of conversion (DC) were evaluated by Fourier transform infrared spectroscopy. Data was statistically analyzed (2-way analysis of variance, ANOVA, Holm-Sidak, p < 0.05). Results Post-curing significantly increased FS, E and DC in nearly all cases. WoF did not change, or even decreased with time. For all properties ANOVA found significant differences and interactions of time and material. Wet storage reduced the moduli and the other properties measured with the exception of FS and WoF of ODPDM; DC only decreased in BPDM and IPDM composites. Significance Differences in core structure resulted in significantly different physical properties of the composites studied with two phenyl rings connected by one ether linkage as in ODPDM having superior FS, WoF and DC especially after 24 h under wet conditions. As expected, post-curing significantly contributed to the final mechanical properties of the composites, while wet storage generally reduced the mechanical properties. PMID:17980422

Pharmacokinetic analysis and comparison of caffeine administered rapidly or slowly in coffee chilled or hot versus chilled energy drink in healthy young adults

PubMed Central

White, John R.; Padowski, Jeannie M.; Zhong, Yili; Chen, Gang; Luo, Shaman; Lazarus, Philip; Layton, Matthew E.; McPherson, Sterling

2016-01-01

Abstract Context: There is a paucity of data describing the impact of type of beverage (coffee versus energy drink), different rates of consumption and different temperature of beverages on the pharmacokinetic disposition of caffeine. Additionally, there is concern that inordinately high levels of caffeine may result from the rapid consumption of cold energy drinks. Objective: The objective of this study was to compare the pharmacokinetics of caffeine under various drink temperature, rate of consumption and vehicle (coffee versus energy drink) conditions. Materials: Five caffeine (dose = 160 mg) conditions were evaluated in an open-label, group-randomized, crossover fashion. After the administration of each caffeine dose, 10 serial plasma samples were harvested. Caffeine concentration was measured via liquid chromatography–mass spectrometry (LC–MS), and those concentrations were assessed by non-compartmental pharmacokinetic analysis. The calculated mean pharmacokinetic parameters were analyzed statistically by one-way repeated measures analysis of variance (RM ANOVA). If differences were found, each group was compared to the other by all pair-wise multiple comparison. Results: Twenty-four healthy subjects ranging in age from 18 to 30 completed the study. The mean caffeine concentration time profiles were similar with overlapping SDs at all measured time points. The ANOVA revealed significant differences in mean C max and V d ss/F, but no pair-wise comparisons reached statistical significance. No other differences in pharmacokinetic parameters were found. Discussion: The results of this study are consistent with previous caffeine pharmacokinetic studies and suggest that while rate of consumption, temperature of beverage and vehicle (coffee versus energy drink) may be associated with slightly different pharmacokinetic parameters, the overall impact of these variables is small. Conclusion: This study suggests that caffeine absorption and exposure from coffee and energy drink is similar irrespective of beverage temperature or rate of consumption. PMID:27100333

Upper cervical and upper thoracic manipulation versus mobilization and exercise in patients with cervicogenic headache: a multi-center randomized clinical trial.

PubMed

Dunning, James R; Butts, Raymond; Mourad, Firas; Young, Ian; Fernandez-de-Las Peñas, Cesar; Hagins, Marshall; Stanislawski, Thomas; Donley, Jonathan; Buck, Dustin; Hooks, Todd R; Cleland, Joshua A

2016-02-06

Although commonly utilized interventions, no studies have directly compared the effectiveness of cervical and thoracic manipulation to mobilization and exercise in individuals with cervicogenic headache (CH). The purpose of this study was to compare the effects of manipulation to mobilization and exercise in individuals with CH. One hundred and ten participants (n = 110) with CH were randomized to receive both cervical and thoracic manipulation (n = 58) or mobilization and exercise (n = 52). The primary outcome was headache intensity as measured by the Numeric Pain Rating Scale (NPRS). Secondary outcomes included headache frequency, headache duration, disability as measured by the Neck Disability Index (NDI), medication intake, and the Global Rating of Change (GRC). The treatment period was 4 weeks with follow-up assessment at 1 week, 4 weeks, and 3 months after initial treatment session. The primary aim was examined with a 2-way mixed-model analysis of variance (ANOVA), with treatment group (manipulation versus mobilization and exercise) as the between subjects variable and time (baseline, 1 week, 4 weeks and 3 months) as the within subjects variable. The 2X4 ANOVA demonstrated that individuals with CH who received both cervical and thoracic manipulation experienced significantly greater reductions in headache intensity (p < 0.001) and disability (p < 0.001) than those who received mobilization and exercise at a 3-month follow-up. Individuals in the upper cervical and upper thoracic manipulation group also experienced less frequent headaches and shorter duration of headaches at each follow-up period (p < 0.001 for all). Additionally, patient perceived improvement was significantly greater at 1 and 4-week follow-up periods in favor of the manipulation group (p < 0.001). Six to eight sessions of upper cervical and upper thoracic manipulation were shown to be more effective than mobilization and exercise in patients with CH, and the effects were maintained at 3 months. NCT01580280 April 16, 2012.

Understanding the usage of content in a mental health intervention for depression: an analysis of log data.

PubMed

Van Gemert-Pijnen, Julia Ewc; Kelders, Saskia M; Bohlmeijer, Ernst T

2014-01-31

Web-based interventions for the early treatment of depressive symptoms can be considered effective in reducing mental complaints. However, there is a limited understanding of which elements in an intervention contribute to effectiveness. For efficiency and effectiveness of interventions, insight is needed into the use of content and persuasive features. The aims of this study were (1) to illustrate how log data can be used to understand the uptake of the content of a Web-based intervention that is based on the acceptance and commitment therapy (ACT) and (2) to discover how log data can be of value for improving the incorporation of content in Web-based interventions. Data from 206 participants (out of the 239) who started the first nine lessons of the Web-based intervention, Living to the Full, were used for a secondary analysis of a subset of the log data of the parent study about adherence to the intervention. The log files used in this study were per lesson: login, start mindfulness, download mindfulness, view success story, view feedback message, start multimedia, turn on text-message coach, turn off text-message coach, and view text message. Differences in usage between lessons were explored with repeated measures ANOVAs (analysis of variance). Differences between groups were explored with one-way ANOVAs. To explore the possible predictive value of the login per lesson quartiles on the outcome measures, four linear regressions were used with login quartiles as predictor and with the outcome measures (Center for Epidemiologic Studies-Depression [CES-D] and the Hospital Anxiety and Depression Scale-Anxiety [HADS-A] on post-intervention and follow-up) as dependent variables. A significant decrease in logins and in the use of content and persuasive features over time was observed. The usage of features varied significantly during the treatment process. The usage of persuasive features increased during the third part of the ACT (commitment to value-based living), which might indicate that at that stage motivational support was relevant. Higher logins over time (9 weeks) corresponded with a higher usage of features (in most cases significant); when predicting depressive symptoms at post-intervention, the linear regression yielded a significant model with login quartile as a significant predictor (explained variance is 2.7%). A better integration of content and persuasive features in the design of the intervention and a better intra-usability of features within the system are needed to identify which combination of features works best for whom. Pattern recognition can be used to tailor the intervention based on usage patterns from the earlier lessons and to support the uptake of content essential for therapy. An adaptable interface for a modular composition of therapy features supposes a dynamic approach for Web-based treatment; not a predefined path for all, but a flexible way to go through all features that have to be used.

Understanding the Usage of Content in a Mental Health Intervention for Depression: An Analysis of Log Data

PubMed Central

2014-01-01

Background Web-based interventions for the early treatment of depressive symptoms can be considered effective in reducing mental complaints. However, there is a limited understanding of which elements in an intervention contribute to effectiveness. For efficiency and effectiveness of interventions, insight is needed into the use of content and persuasive features. Objective The aims of this study were (1) to illustrate how log data can be used to understand the uptake of the content of a Web-based intervention that is based on the acceptance and commitment therapy (ACT) and (2) to discover how log data can be of value for improving the incorporation of content in Web-based interventions. Methods Data from 206 participants (out of the 239) who started the first nine lessons of the Web-based intervention, Living to the Full, were used for a secondary analysis of a subset of the log data of the parent study about adherence to the intervention. The log files used in this study were per lesson: login, start mindfulness, download mindfulness, view success story, view feedback message, start multimedia, turn on text-message coach, turn off text-message coach, and view text message. Differences in usage between lessons were explored with repeated measures ANOVAs (analysis of variance). Differences between groups were explored with one-way ANOVAs. To explore the possible predictive value of the login per lesson quartiles on the outcome measures, four linear regressions were used with login quartiles as predictor and with the outcome measures (Center for Epidemiologic Studies—Depression [CES-D] and the Hospital Anxiety and Depression Scale—Anxiety [HADS-A] on post-intervention and follow-up) as dependent variables. Results A significant decrease in logins and in the use of content and persuasive features over time was observed. The usage of features varied significantly during the treatment process. The usage of persuasive features increased during the third part of the ACT (commitment to value-based living), which might indicate that at that stage motivational support was relevant. Higher logins over time (9 weeks) corresponded with a higher usage of features (in most cases significant); when predicting depressive symptoms at post-intervention, the linear regression yielded a significant model with login quartile as a significant predictor (explained variance is 2.7%). Conclusions A better integration of content and persuasive features in the design of the intervention and a better intra-usability of features within the system are needed to identify which combination of features works best for whom. Pattern recognition can be used to tailor the intervention based on usage patterns from the earlier lessons and to support the uptake of content essential for therapy. An adaptable interface for a modular composition of therapy features supposes a dynamic approach for Web-based treatment; not a predefined path for all, but a flexible way to go through all features that have to be used. PMID:24486914

Factors That Affect Age of Identification of Children with an Autism Spectrum Disorder

ERIC Educational Resources Information Center

Adelman, Chana R.; Kubiszyn, Thomas

2017-01-01

This study explored factors associated with age of identification of autism spectrum disorder (ASD). Results of a one-way ANOVA indicated differences in age of diagnosis among the four regions in the United States, F(3, 650) = 7.618, p = 0.01. Tukey's post hoc comparisons of the groups indicated that the mean age of diagnosis in the Midwest (M =…

Endocannabinoids as a Target for the Treatment of Traumatic Brain Injury

DTIC Science & Technology

2016-01-01

an RNeasy Plus Uni- versal Mini Kit (Qiagen, Valencia, CA), according to the manu- facturer’s instructions. Total RNA was reverse transcribed using...one-way ANOVA. 18 Figure 10. Mini excitatory post-synaptic currents (mEPSCs) recorded from rat cortex (site...stress sensitivity, anhedonia, impulse control deficits, sleep disturbances, and pain sensitivity.6–10 The initial mechanical insult induces increased

The Role of Morphology and Short Vowelization in Reading Arabic among Normal and Dyslexic Readers in Grades 3, 6, 9, and 12

ERIC Educational Resources Information Center

Abu-Rabia, Salim

2007-01-01

This study was an investigation of several Arabic reading measures among dyslexics and normal Arabic readers across different ages (grades 3, 6, 9, and 12): the role of morphology, short vowelization (phonological and syntactic skills), spelling, reading isolated words, and reading comprehension. The results of the one-way ANOVAs indicated clear…

Improving Your Data Transformations: Applying the Box-Cox Transformation

ERIC Educational Resources Information Center

Osborne, Jason W.

2010-01-01

Many of us in the social sciences deal with data that do not conform to assumptions of normality and/or homoscedasticity/homogeneity of variance. Some research has shown that parametric tests (e.g., multiple regression, ANOVA) can be robust to modest violations of these assumptions. Yet the reality is that almost all analyses (even nonparametric…

Implications of Therapist Effects for the Design and Analysis of Comparative Studies of Psychotherapies.

ERIC Educational Resources Information Center

Crits-Christoph, Paul; Mintz, Jim

1991-01-01

Presents reasons therapist should be included as random design factor in nested analysis of (co)variance (AN[C]OVA) design used in psychotherapy research. Reviews studies which indicate majority of investigators ignore issue of effects from incorrect specification of ANOVA design. Presents reanalysis of data from 10 psychotherapy outcome studies…

Estimation of the KR20 Reliability Coefficient When Data Are Incomplete.

ERIC Educational Resources Information Center

Huynh, Huynh

Three techniques for estimating Kuder Richardson reliability (KR20) coefficients for incomplete data are contrasted. The methods are: (1) Henderson's Method 1 (analysis of variance, or ANOVA); (2) Henderson's Method 3 (FITCO); and (3) Koch's method of symmetric sums (SYSUM). A Monte Carlo simulation was used to assess the precision of the three…

Wives Domain-Specific "Marriage Work" with Friends and Spouses: Links to Marital Quality

ERIC Educational Resources Information Center

Proulx, Christine M.; Helms, Heather M.; Payne, C. Chris

2004-01-01

This study examined the friendship experiences of 52 wives and mothers, with particular attention given to wives' marriage work (discussions about concerns and problems in the marriage) in 10 domains with friends and spouses. A series of within-subjects repeated measures analyses of variance (ANOVAs) indicated that in all but two domains, wives…

What Is Wrong with ANOVA and Multiple Regression? Analyzing Sentence Reading Times with Hierarchical Linear Models

ERIC Educational Resources Information Center

Richter, Tobias

2006-01-01

Most reading time studies using naturalistic texts yield data sets characterized by a multilevel structure: Sentences (sentence level) are nested within persons (person level). In contrast to analysis of variance and multiple regression techniques, hierarchical linear models take the multilevel structure of reading time data into account. They…

Stability of Playfulness across Environmental Settings: A Pilot Study

ERIC Educational Resources Information Center

Rigby, Patricia; Gaik, Sandy

2007-01-01

The Test of Playfulness (ToP) was used in this pilot study to examine the stability of playfulness of 16 children with cerebral palsy (CP), aged 4-8 years, across three environmental settings: home, community, and school. Each videotaped play segment was scored using the ToP. The ANOVA statistic demonstrated a significant variance (p less than…

Robust variance estimation with dependent effect sizes: practical considerations including a software tutorial in Stata and spss.

PubMed

Tanner-Smith, Emily E; Tipton, Elizabeth

2014-03-01

Methodologists have recently proposed robust variance estimation as one way to handle dependent effect sizes in meta-analysis. Software macros for robust variance estimation in meta-analysis are currently available for Stata (StataCorp LP, College Station, TX, USA) and spss (IBM, Armonk, NY, USA), yet there is little guidance for authors regarding the practical application and implementation of those macros. This paper provides a brief tutorial on the implementation of the Stata and spss macros and discusses practical issues meta-analysts should consider when estimating meta-regression models with robust variance estimates. Two example databases are used in the tutorial to illustrate the use of meta-analysis with robust variance estimates. Copyright © 2013 John Wiley & Sons, Ltd.

Antigen-loaded dendritic cell migration: MR imaging in a pancreatic carcinoma model.

PubMed

Zhang, Zhuoli; Li, Weiguo; Procissi, Daniele; Li, Kangan; Sheu, Alexander Y; Gordon, Andrew C; Guo, Yang; Khazaie, Khashayarsha; Huan, Yi; Han, Guohong; Larson, Andrew C

2015-01-01

To test the following hypotheses in a murine model of pancreatic cancer: (a) Vaccination with antigen-loaded iron-labeled dendritic cells reduces T2-weighted signal intensity at magnetic resonance (MR) imaging within peripheral draining lymph nodes ( LN lymph node s) and (b) such signal intensity reductions are associated with tumor size changes after dendritic cell vaccination. The institutional animal care and use committee approved this study. Panc02 cells were implanted into the flanks of 27 C57BL/6 mice bilaterally. After tumors reached 10 mm, cell viability was evaluated, and iron-labeled dendritic cell vaccines were injected into the left hind footpad. The mice were randomly separated into the following three groups (n = 9 in each): Group 1 was injected with 1 million iron-labeled dendritic cells; group 2, with 2 million cells; and control mice, with 200 mL of phosphate-buffered saline. T1- and T2-weighted MR imaging of labeled dendritic cell migration to draining LN lymph node s was performed before cell injection and 6 and 24 hours after injection. The signal-to-noise ratio ( SNR signal-to-noise ratio ) of the draining LN lymph node s was measured. One-way analysis of variance ( ANOVA analysis of variance ) was used to compare Prussian blue-positive dendritic cell measurements in LN lymph node s. Repeated-measures ANOVA analysis of variance was used to compare in vivo T2-weighted SNR signal-to-noise ratio LN lymph node measurements between groups over the observation time points. Trypan blue assays showed no significant difference in mean viability indexes (unlabeled vs labeled dendritic cells, 4.32% ± 0.69 [standard deviation] vs 4.83% ± 0.76; P = .385). Thirty-five days after injection, the mean left and right flank tumor sizes, respectively, were 112.7 mm(2) ± 16.4 and 109 mm(2) ± 24.3 for the 1-million dendritic cell group, 92.2 mm(2) ± 9.9 and 90.4 mm(2) ± 12.8 for the 2-million dendritic cell group, and 193.7 mm(2) ± 20.9 and 189.4 mm(2) ± 17.8 for the control group (P = .0001 for control group vs 1-million cell group; P = .00007 for control group vs 2-million cell group). There was a correlation between postinjection T2-weighted SNR signal-to-noise ratio decreases in the left popliteal LN lymph node 24 hours after injection and size changes at follow-up for tumors in both flanks (R = 0.81 and R = 0.76 for left and right tumors, respectively). MR imaging approaches can be used for quantitative measurement of accumulated iron-labeled dendritic cell-based vaccines in draining LN lymph node s. The amount of dendritic cell-based vaccine in draining LN lymph node s correlates well with observed protective effects.

Differences in gender participation in college physical science laboratory as perceived by students and instructors

NASA Astrophysics Data System (ADS)

Gifford, Fay Evan

The purpose of this study was to determine the difference in gender participation in the college physical science laboratory as perceived by students. The sample n this study consisted of 168 college sophomore architecture students (56 males and 33 females) and engineering students (61 males and 18 females). Depending on the type of information desired, a number of analyses were used including independent samples t-test, two-way Anova, general linear model analysis, Univariate analysis of variance, and descriptive statistics. In the analysis of data for the first fourteen questions of the questionnaire, which are called descriptive data, both gender and academic discipline differences were examined. It was found both genders picked personal choice as the role they played in the lab, and they were recorder, computer operator, and set up. There was no major difference here for the two disciplines except for engineers (by four to one over the architectures), who thought one member took the lead and assigned the role. There was no statistically significant difference in attitude toward group laboratory work between the two genders, but there was a significant difference by academic discipline here. There was a significant difference between genders for the way that students were assigned to small groups (i.e., the females would prefer the professor assign the role). For the open-ended student question dealing with suggestions for improving student participation in the labs, about one-third responded. One major difference between the disciplines was the architectural students by a twenty to one ratio over the engineers thought they didn't need a physics lab. For Hypothesis 4, there was a general agreement between the students' and the instructors' that there was not a difference in the students' gender responses and the instructors'. For Hypothesis 5, the responses from the four special gender questions for the students and instructors show that the males don't agree with the instructors on any of the four questions, but the females agree with the instructors on two of the questions.

Variance in binary stellar population synthesis

NASA Astrophysics Data System (ADS)

Breivik, Katelyn; Larson, Shane L.

2016-03-01

In the years preceding LISA, Milky Way compact binary population simulations can be used to inform the science capabilities of the mission. Galactic population simulation efforts generally focus on high fidelity models that require extensive computational power to produce a single simulated population for each model. Each simulated population represents an incomplete sample of the functions governing compact binary evolution, thus introducing variance from one simulation to another. We present a rapid Monte Carlo population simulation technique that can simulate thousands of populations in less than a week, thus allowing a full exploration of the variance associated with a binary stellar evolution model.

Studying Variance in the Galactic Ultra-compact Binary Population

NASA Astrophysics Data System (ADS)

Larson, Shane L.; Breivik, Katelyn

2017-01-01

In the years preceding LISA, Milky Way compact binary population simulations can be used to inform the science capabilities of the mission. Galactic population simulation efforts generally focus on high fidelity models that require extensive computational power to produce a single simulated population for each model. Each simulated population represents an incomplete sample of the functions governing compact binary evolution, thus introducing variance from one simulation to another. We present a rapid Monte Carlo population simulation technique that can simulate thousands of populations on week-long timescales, thus allowing a full exploration of the variance associated with a binary stellar evolution model.

Kruskal-Wallis test: BASIC computer program to perform nonparametric one-way analysis of variance and multiple comparisons on ranks of several independent samples.

PubMed

Theodorsson-Norheim, E

1986-08-01

Multiple t tests at a fixed p level are frequently used to analyse biomedical data where analysis of variance followed by multiple comparisons or the adjustment of the p values according to Bonferroni would be more appropriate. The Kruskal-Wallis test is a nonparametric 'analysis of variance' which may be used to compare several independent samples. The present program is written in an elementary subset of BASIC and will perform Kruskal-Wallis test followed by multiple comparisons between the groups on practically any computer programmable in BASIC.

Effect of Green Coffee Bean Extract on Streptococcus mutans Count: A Randomised Control Trial

PubMed Central

Kaushik, Mamta; Roshni, Roshni; Reddy, Pallavi; Mehra, Neha; Jain, Vallari; Rana, Ritu

2017-01-01

Introduction Mouth rinses have been popularly used as a supplementary oral hygiene aid. A lot of commercially available mouth rinses possess few adverse effects, which has necessitated the search for alternative and herbal mouth rinses. Aim The aim of the study was to assess the effect of rinsing with green coffee bean extract in comparison with chlorhexidine mouthwash and sterile water on salivary Streptococcus mutans count. Materials and Methods A randomized parallel controlled clinical trial was planned and 45 subjects aged between 18-22 years were selected. The subjects were divided into three groups (n=15 in each group): Group A: Study group: 2% Green coffee bean extract, Group B: Positive control: 0.2% Chlorhexidine (CHX), Group C: Negative control: Sterile water. Group A subjects rinsed mouth with 5 ml of 2% Green coffee bean extract for one minute. Group B subjects rinsed mouth with 5 ml 0.2% CHX mouthwash for one minute. Group C subjects rinsed mouth with 5 ml of Sterile water for one minute twice daily for two weeks. Baseline samples (Pre rinse) were collected on day 1 and post rinsing saliva samples were collected after 14 days. The samples were cultured using Mitis Salivarius Agar enriched with Bacitracin and colonies were counted using a hand held digital colony counter. The statistical analysis was done using paired t-test, One-way variance ANOVA and Post-Hoc tests. Results The Green coffee bean extract group showed a statistical significant reduction in Streptococcus mutans colony count before and after intervention which was comparable with CHX group. Conclusion Green coffee bean extract as a mouthwash can be explored as a safe and effective alternative to CHX mouthwash. PMID:28658911

Effect of the CYP2C8 genotype on the pharmacokinetics and pharmacodynamics of repaglinide.

PubMed

Tomalik-Scharte, Dorota; Fuhr, Uwe; Hellmich, Martin; Frank, Dorothee; Doroshyenko, Oxana; Jetter, Alexander; Stingl, Julia C

2011-05-01

The pharmacokinetics of repaglinide shows pronounced interindividual variability, for which several reasons have been considered, including interactions with drugs inhibiting CYP2C8 and CYP2C8 genetic polymorphism. However, existing data on the role of genetic polymorphisms in repaglinide disposition are not fully consistent. We studied the effect of CYP2C8*3 on the pharmacokinetics and pharmacodynamics of repaglinide in 29 healthy whites carrying CYP2C8*3/*3 (n = 4), CYP2C8*1/*3 (n = 13), or CYP2C8*1/*1 (n = 12). After administration of a single dose of 2 mg of repaglinide, blood was drawn for assessment of repaglinide pharmacokinetics and pharmacodynamics, and urine was collected to quantify the main repaglinide metabolites M1 and M4 up to 24 h postdose. Repaglinide and the metabolites were quantified by liquid chromatography-tandem mass spectrometry. Considering only the effect of CYP2C8*3, the mean (95% confidence interval) area under the time-concentration curve (AUC) from zero to infinity of repaglinide was 72.4 (6.7-138.0), 97.2 (59.2-135.2), and 105.9 (52.4-159.3) ng · ml(-1) · h and the maximal concentration (C(max)) was 38.5 (3.8-73.2), 50.3 (37.5-63.0), and 60.3 (31.5-89.1) ng · ml(-1), respectively, in carriers of CYP2C8*3/*3, CYP2C8*1/*3, and CYP2C8*1/*1 [p > 0.05, one-way analysis of variance (ANOVA)]. In addition, for urinary metabolite excretion and pharmacodynamic parameters, i.e., mean and maximal changes in insulin and glucose concentration, no significant differences between CYP2C8 genotypes were observed. Likewise, no significant effects on the pharmacokinetics or pharmacodynamics were observed when AUC and C(max) of repaglinide were corrected for reported effects of the SLCO1B1 521T>C polymorphism or when both polymorphisms were tested in a two-way ANOVA. In conclusion, CYP2C8*3 does not seem to play an important role in the pharmacokinetics and pharmacodynamics of repaglinide given in a therapeutic dose.

Frontal brain activation in premature infants' response to auditory stimuli in neonatal intensive care unit.

PubMed

Saito, Yuri; Fukuhara, Rie; Aoyama, Shiori; Toshima, Tamotsu

2009-07-01

The present study was focusing on the very few contacts with the mother's voice that NICU infants have in the womb as well as after birth, we examined whether they can discriminate between their mothers' utterances and those of female nurses in terms of the emotional bonding that is facilitated by prosodic utterances. Twenty-six premature infants were included in this study, and their cerebral blood flows were measured by near-infrared spectroscopy. They were exposed to auditory stimuli in the form of utterances made by their mothers and female nurses. A two (stimulus: mother and nurse) x two (recording site: right frontal area and left frontal area) analysis of variance (ANOVA) for these relative oxy-Hb values was conducted. The ANOVA showed a significant interaction between stimulus and recording site. The mother's and the nurse's voices were activated in the same way in the left frontal area, but showed different reactions in the right frontal area. We presume that the nurse's voice might become associated with pain and stress for premature infants. Our results showed that the premature infants reacted differently to the different voice stimuli. Therefore, we presume that both mothers' and nurses' voices represent positive stimuli for premature infants because both activate the frontal brain. Accordingly, we cannot explain our results only in terms of the state-dependent marker for infantile individual differences, but must also address the stressful trigger of nurses' voices for NICU infants.

Effects of 17β-trenbolone on Eastern and Western mosquitofish (Gambusia holbrooki and G. affinis) anal fin growth and gene expression patterns.

PubMed

Brockmeier, Erica K; Ogino, Yukiko; Iguchi, Taisen; Barber, David S; Denslow, Nancy D

2013-03-15

The Eastern and Western mosquitofish (Gambusia holbrooki and G. affinis) are potential bioindicator organisms for endocrine disruptors. Male mosquitofish have an elongated anal fin (gonopodium) used for internal fertilization whose formation is driven by androgens. Normal female mosquitofish have a normal, rounded anal fin which undergoes elongation into a gonopodium structure when female mosquitofish are exposed to androgenic chemicals. Significant issues with using mosquitofish as a bioindicator include the lack of knowledge on how anal fin growth in females corresponds to endpoints relevant to biological integrity and the lack of information on the molecular pathways that regulate anal fin growth. The objectives of this study were to understand how androgen-induced anal fin elongation relates to changes in endpoints related to the female reproductive system and to understand how anal fin elongation occurs in androgen-exposed female mosquitofish. To achieve these objectives, adult female G. holbrooki were exposed to a vehicle control or one of three doses of the androgen 17β-trenbolone (TB) at nominal concentrations of 0.1, 1 or 10 μg TB/L. Anal fin measurements were taken and livers were used for quantitative polymerase chain reaction analysis of vitellogenin (vtg) mRNA expression at multiple time points. 10 μg TB/L induced anal fin elongation after 7 days of treatment (one-way ANOVA, p<0.05) as did 0.1 and 1 μg TB/L at later time points (one-way ANOVA, p<0.05). 10 μg TB/L significantly reduced hepatic vtg gene expression at all time points assessed (one-way ANOVA, p<0.05). There was no correlation between anal fin elongation levels and vtg gene expression (Spearman's ρ, p>0.05). In a separate experiment, female G. holbrooki and G. affinis were exposed to the vehicle control or 1 μg TB/L. Anal fins were used for qualitative gene expression analysis of the genes sonic hedgehog (shh), muscle segment homeobox C (msxC), and fibroblast growth factor receptor 1 (fgfr1) by in situ hybridization. Shh was expressed in the distal tip of the gonopodium while msxC and fgfr1 were more widely expressed along the same anal fin rays during androgen exposure. These data provide insight into the molecular pathways involved in anal fin elongation and pave the way for future work toward developing the mosquitofish into a bioindicator organism for endocrine disruptors. Copyright © 2012 Elsevier B.V. All rights reserved.

Waddell non-organic signs: new evidence suggests somatic amplification among outpatient chronic pain patients.

PubMed

Wygant, Dustin B; Arbisi, Paul A; Bianchini, Kevin J; Umlauf, Robert L

2017-04-01

Waddell et al. identified a set of eight non-organic signs in 1980. There has been controversy about their meaning, particularly with respect to their use as validity indicators. The current study examined the Waddell signs in relation to measures of somatic amplification or over-reporting in a sample of outpatient chronic pain patients. We examined the degree to which these signs were associated with measures of over-reporting. This study examined scores on the Waddell signs in relation to over-reporting indicators in an outpatient chronic pain sample. We examined 230 chronic pain patients treated at a multidisciplinary pain clinic. The majority of these patients presented with primary back or spinal injuries. The outcome measures used in the study were Waddell signs, Modified Somatic Perception Questionnaire, Pain Disability Index, and the Minnesota Multiphasic Personality Inventory-2 Restructured Form. We examined Waddell signs using multivariate analysis of variance (MANOVA) and analysis of variance (ANOVA), receiver operating characteristic analysis, classification accuracy, and relative risk ratios. Multivariate analysis of variance and ANOVA showed a significant association between Waddell signs and somatic amplification. Classification analyses showed increased odds of somatic amplification at a Waddell score of 2 or 3. Our results found significant evidence of an association between Waddell signs and somatic over-reporting. Elevated scores on the Waddell signs (particularly scores higher than 2 and 3) were associated with increased odds of exhibiting somatic over-reporting. Copyright © 2016 Elsevier Inc. All rights reserved.

Effects of conditioners on microshear bond strength to enamel after carbamide peroxide bleaching and/or casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) treatment.

PubMed

Adebayo, O A; Burrow, M F; Tyas, M J

2007-11-01

To evaluate (a) the enamel microshear bond strength (MSBS) of a universal adhesive and (b) the effects of conditioning with a self-etching primer adhesive with/without prior bleaching and/or casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) application. Thirty-five molars were cut into four sections, assigned randomly to four groups (no treatment; 16% carbamide peroxide bleaching; CPP-ACP-containing paste (Tooth Mousse, TM); bleaching and TM) and treated accordingly. Specimens were divided into two for bonding with either a self-etching primer (Clearfil SE Bond, CSE) or a total-etch adhesive (Single Bond, SB). Specimens for CSE bonding were subdivided for one of four preconditioning treatments (no conditioning; 30-40% phosphoric acid (PA); 15% EDTA; 20% polyacrylic acid conditioner (Cavity conditioner, CC) and treated. The adhesives were applied and resin composite bonded to the enamel using microtubes (internal diameter 0.75mm). Bonds were stressed in shear until failure, mean MSBS calculated and data analysed using ANOVA with Tukey's HSD test (alpha=0.05). The modes of bond failure were assessed and classified. Two-way ANOVA revealed significant differences between treatments (P<0.0001), conditioners (P<0.0001) and a significant interaction between treatments and conditioners (P=0.001). One-way ANOVA revealed no significant differences in MSBS following any of the treatments for SB; following TM application for CSE without preconditioning; and significant differences in MSBS following bleaching with and without TM application for CSE. With preconditioning, applying PA before CSE post-bleaching and either PA or CC before CSE post-TM application, resulted in significant differences in MSBS (P<0.05). The use of conditioners prior to bonding with the self-etching primer adhesive system on treated enamel may significantly improve bond strengths.

Leader Responses to Collective Failure, and Maintenance of Group Integration, Task Motivation, Compliance, and Leader Endorsement

DTIC Science & Technology

1980-11-01

21 Table 2 - Analysis of Variance Summary Table: Leader Attributions . 21 Table 3 - Mean Leader Attributions to Four Factors under Success...been examined. Studies (Julian, Hollander, and Regula, 1969; !4ichener and Lawler, 1975) have indicated that leaders of groups which fail suffer signif ...the collective failure induction, one-way analyses of variance vere performed comparing the three performance evaluation conditions with the no

Visual classification of very fine-grained sediments: Evaluation through univariate and multivariate statistics

USGS Publications Warehouse

Hohn, M. Ed; Nuhfer, E.B.; Vinopal, R.J.; Klanderman, D.S.

1980-01-01

Classifying very fine-grained rocks through fabric elements provides information about depositional environments, but is subject to the biases of visual taxonomy. To evaluate the statistical significance of an empirical classification of very fine-grained rocks, samples from Devonian shales in four cored wells in West Virginia and Virginia were measured for 15 variables: quartz, illite, pyrite and expandable clays determined by X-ray diffraction; total sulfur, organic content, inorganic carbon, matrix density, bulk density, porosity, silt, as well as density, sonic travel time, resistivity, and ??-ray response measured from well logs. The four lithologic types comprised: (1) sharply banded shale, (2) thinly laminated shale, (3) lenticularly laminated shale, and (4) nonbanded shale. Univariate and multivariate analyses of variance showed that the lithologic classification reflects significant differences for the variables measured, difference that can be detected independently of stratigraphic effects. Little-known statistical methods found useful in this work included: the multivariate analysis of variance with more than one effect, simultaneous plotting of samples and variables on canonical variates, and the use of parametric ANOVA and MANOVA on ranked data. ?? 1980 Plenum Publishing Corporation.

Assessment of spatial variability of major-ion concentrations and del oxygen-18 values in surface snow, Upper Fremont Glacier, Wyoming, USA

USGS Publications Warehouse

Naftz, D.L.; Schuster, P.F.; Reddy, M.M.

1994-01-01

One hundred samples were collected from the surface of the Upper Fremont Glacier at equally spaced intervals defined by an 8100m2 snow grid to asesss the significance of lateral variability in major-ion concentrations and del oxygen-18 values. Comparison of the observed variability of each chemical constituent to the variability expected by measurement error indicated substantial lateral variability with the surface-snow layer. Results of the nested ANOVA indicate most of the variance for every constituent is in the values grouped at the two smaller geographic scales (between 506m2 and within 506m2 sections). The variance data from the snow grid were used to develop equations to evaluate the significance of both positive and negative concentration/value peaks of nitrate and del oxygen-18 with depth, in a 160m ice core. Values of del oxygen-18 in the section from 110-150m below the surface consistently vary outside the expected limits and possibly represents cooler temperatures during the Little Ice Age from about 1810 to 1725 A.D. -from Authors

Smoothing spline ANOVA frailty model for recurrent event data.

PubMed

Du, Pang; Jiang, Yihua; Wang, Yuedong

2011-12-01

Gap time hazard estimation is of particular interest in recurrent event data. This article proposes a fully nonparametric approach for estimating the gap time hazard. Smoothing spline analysis of variance (ANOVA) decompositions are used to model the log gap time hazard as a joint function of gap time and covariates, and general frailty is introduced to account for between-subject heterogeneity and within-subject correlation. We estimate the nonparametric gap time hazard function and parameters in the frailty distribution using a combination of the Newton-Raphson procedure, the stochastic approximation algorithm (SAA), and the Markov chain Monte Carlo (MCMC) method. The convergence of the algorithm is guaranteed by decreasing the step size of parameter update and/or increasing the MCMC sample size along iterations. Model selection procedure is also developed to identify negligible components in a functional ANOVA decomposition of the log gap time hazard. We evaluate the proposed methods with simulation studies and illustrate its use through the analysis of bladder tumor data. © 2011, The International Biometric Society.

Fracture strength of lithium disilicate crowns compared to polymer-infiltrated ceramic-network and zirconia reinforced lithium silicate crowns.

PubMed

Sieper, Kim; Wille, Sebastian; Kern, Matthias

2017-10-01

The aim of this study was to evaluate the fracture strength of crowns made from current CAD/CAM materials. In addition the influence of crown thickness and chewing simulation on the fracture strength was evaluated. Crowns were fabricated from lithium disilicate, zirconia reinforced lithium silicate (ZLS-ceramic) and a polymer-infiltrated ceramic-network (PICN) with an occlusal thickness of 1.0mm or 1.5mm, respectively (n=16). Crowns were cemented on composite dies. Subgroups of eight specimens were loaded with 5kg in a chewing simulator for 1,200,000 cycles with thermal cycling. Finally, all specimens were loaded until fracture in a universal testing machine. Three-way ANOVA was used to detect statistical interaction. Differences regarding the materials were tested with two-way ANOVA, following one-way ANOVA and a post-hoc Tukey's-Test. All crowns survived the chewing simulation. The material had a significant influence on the fracture resistance (p≤0.05). Lithium disilicate achieved the highest values of fracture strength in almost all groups followed by ZLS-ceramic. PICN achieved the lowest values of fracture strength. Chewing simulation increased the fracture strength of thick lithium disilicate crown significantly. Greater occlusal thickness of all crown materials resulted in higher crown fracture strength before chewing simulation. After chewing simulation occlusal thickness of lithium disilicate and PICN crowns had no significant influence on the fracture strength. All crowns revealed fracture strength above the clinically expected loading forces. Therefore the durability of the tested CAD/CAM materials seems promising also in an occlusal thickness of 1.0mm. Copyright © 2017 Elsevier Ltd. All rights reserved.

The effect of brushing with toothpaste containing nano calcium carbonate upon nanofill composite resin surface roughness

NASA Astrophysics Data System (ADS)

Ramadhani, A. M.; Herda, E.; Triaminingsih, S.

2017-08-01

This study aims to determine the effect of brushing with toothpaste containing nanocalcium carbonate on the roughness of nanofill composite resin surface. Brushing was conducted with 3 types of materials for 3 consecutive brushing periods of 10 minutes each. Surface roughness was measured using a surface-roughness tester and the results were analyzed using the repeated ANOVA and the one-way ANOVA test. The surface morphology was observed using SEM after 3 months’ worth of brushing with the 3 materials. It was found that the nanofill composite resin surface-roughness value increased significantly (p<0.005) after brushing with toothpaste containing nano calcium carbonate for 3 months, but the value was not as high as that obtained when brushing with other types of toothpaste.

Self-reflection, gender and science achievement

NASA Astrophysics Data System (ADS)

Shoop, Kathleen A.

Drawing on socio-cognitive learning theory, this study compared achievement scores of 134 male and female high school biology students randomly assigned to groups which either used self-reflection, used self-reflection and received feedback, or did not self-reflect. Following a pretest, the teacher provided self-reflection strategy instruction to students in the two intervention groups and then subsequently provided in-class self-reflection time for these groups. The posttest concluded the unit; the retention measure was five weeks later. A quasi-experimental 3 x 3 x 2 (time x intervention x gender) factorial repeated-measures control group design was used for this study; a repeated measures ANOVA and several one-way ANOVA's were used to answer the research questions. Results from the repeated-measures ANOVA revealed significant results for Time and Time x Intervention, with the reflection group demonstrating significantly lower gains from pretest to posttest than the other two groups. The ANOVA examining differences between those who reflected and those who reflected and received feedback provided significant results with similar results for the difference between the control group and the reflection group. For teachers and students this study provides several areas of practical significance. Primarily, teachers may find lower student achievement if students regularly self-reflect but do not receive feedback for their reflection.

Effect of saliva decontamination procedures on shear bond strength of a one-step adhesive system.

PubMed

Ülker, E; Bilgin, S; Kahvecioğlu, F; Erkan, A I

2017-09-01

To evaluate the effect of different saliva decontamination procedures on the shear bond strength of a one-step universal adhesive system (Single Bond™ Universal Adhesive, 3M ESPE, St. Paul, MN, USA). The occlusal surfaces of 75 human third molars were ground to expose dentin. The teeth were divided into the following groups: Group 1 (control group): Single Bond™ Universal Adhesive was applied to the prepared tooth according to the manufacturer's recommendations and light cured; no contamination procedure was performed. Group 2: Bonding, light curing, saliva contamination, and dry. Group 3: Bonding, light curing, saliva contamination, rinse, and dry. Group 4: After the procedure performed in Group 2, reapplication of bonding. Group 5: After the procedure performed in Group 3, reapplication of bonding. Then, composite resins were applied with cylindrical-shaped plastic matrixes and light cured. For shear bond testing, a notch-shaped force transducer apparatus was applied to each specimen at the interface between the tooth and composite until failure occurred. The data were statistically analyzed using one-way ANOVA. One-way ANOVA revealed significant differences in shear bond strength between the control group and experimental Groups 2 and 4 (P < 0.05). No significant difference was found for experimental Groups 3 and 5 when compared to the control group (P > 0.05). The present in vitro study showed that water rinsing is necessary if cured adhesive resin is contaminated with saliva to ensure adequate bond strength.

Comparison of the flexural strength of six reinforced restorative materials.

PubMed

Cohen, B I; Volovich, Y; Musikant, B L; Deutsch, A S

2001-01-01

This study calculated the flexural strength for six reinforced restorative materials and demonstrated that flexural strength values can be determined simply by using physical parameters (diametral tensile strength and Young's modulus values) that are easily determined experimentally. A one-way ANOVA analysis demonstrated a statistically significant difference between the two reinforced glass ionomers and the four composite resin materials, with the composite resin being stronger than the glass ionomers.

Gloss and surface roughness produced by polishing kits on resin composites.

PubMed

Sadidzadeh, Ramtin; Cakir, Deniz; Ramp, Lance C; Burgess, John O

2010-08-01

To compare in vitro the surface roughness (Ra) and gloss (G) produced by three conventional and one experimental polishing kits on four resin composites. 24 discs were prepared (d = 12 mm, t = 4 mm) for each resin composite: Filtek Supreme Plus Body/A2 (FSB), Yellow Translucent (FST), Heliomolar/A2 (HM), and EsthetX/A2 (EX) following the manufacturers' instructions. They were finished with 320 grit silicon carbide paper for 80 seconds each. Polishing systems: Sof-Lex, Enhance-Pogo, Astropol and Experimental Discs/EXL-695, were applied following manufacturers' instructions. Each specimen was ultrasonically cleaned with distilled water and dried. Gloss and Ra were measured with a small area glossmeter (Novo-curve) and non-contact profilometer (Proscan 2000) following ISO 4288, respectively. The results were evaluated by two-way ANOVA followed by separate one-way ANOVA and Tukey/Kramer test (P = 0.05). There was a significant interaction of surface roughness and gloss between the composites and polishing systems (P < 0.05). The lowest surface roughness was recorded for FST polished with the Experimental kit. The highest gloss was obtained for FSB composite polished with the Experimental kit. The experimental polishing system produced smoothest surfaces (P < 0.05). The Enhance-Pogo and the experimental polishing kit produced highest gloss (P < 0.05).

Effect of silver nano particles on flexural strength of acrylic resins.

PubMed

Sodagar, Ahmad; Kassaee, Mohammad Zaman; Akhavan, Azam; Javadi, Negar; Arab, Sepideh; Kharazifard, Mohammad Javad

2012-04-01

Poly(methyl methacrylate), PMMA, is widely used for fabrication of removable orthodontic appliances. Silver nano particles (AgNps) have been added to PMMA because of their antimicrobial properties. The aim of this study is to investigate the effect of AgNps on the flexural strength of PMMA. Acrylic liquid containing 0.05% and 0.2% AgNps was prepared for two kinds of acrylic resins: Rapid Repair &Selecta Plus. Two groups without AgNps were used as control groups. For each one, flexural strength was investigated via Three Point Bending method for the 15 acrylic blocks. Two-way ANOVA, one way ANOVA and Tukey tests were used for statistical analysis. Rapid Repair without AgNps showed the highest flexural strength. Addition of 0.05% AgNps to Rapid Repair, significantly decreased its flexural strength while, continuing the addition up to 0.2% increased it nearly up to its primary level. In contrast, addition of AgNps to Selecta Plus increased its flexural strength but addition of 0.05% nano particles was more effective than 0.2%. The effect of AgNps on flexural strength of PMMA depends on several factors including the type of acrylics and the concentrations of nano particles. Copyright © 2011 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Simulation and Study of High Workload Operations

DTIC Science & Technology

1974-04-25

way to proceed. Inviting a test pilot to confess he cannot meet a challenge, or a line pilot to admit he is overpaid, is asking for more than verbal...part of the aaalyais looked for differences hstaaea the subjects. Using buskal Msllis one-way analysis of variance tests these ware found to be present...however, recog- nised that the three flights were intentionally designed to be markedly different from one another, and it remains to test the

Domestic Division of Labor and Its Relationship to Sex Role Orientation and Work Attitudes in Working Couples.

ERIC Educational Resources Information Center

Gunter, Nancy C.; Gunter, B. G.

This study examined the relationship of gender, sex role orientation, and work attitudes to the domestic division of labor in 141 working couples. Couples completed the Bem Sex Role Inventory and a questionnaire on the performance of household tasks. Analysis of variance (ANOVA) confirmed that working women performed a disproportionately larger…

Optimal Design in Three-Level Block Randomized Designs with Two Levels of Nesting: An ANOVA Framework with Random Effects

ERIC Educational Resources Information Center

Konstantopoulos, Spyros

2013-01-01

Large-scale experiments that involve nested structures may assign treatment conditions either to subgroups such as classrooms or to individuals such as students within subgroups. Key aspects of the design of such experiments include knowledge of the variance structure in higher levels and the sample sizes necessary to reach sufficient power to…

Analysis of half diallel mating designs I: a practical analysis procedure for ANOVA approximation.

Treesearch

G.R. Johnson; J.N. King

1998-01-01

Procedures to analyze half-diallel mating designs using the SAS statistical package are presented. The procedure requires two runs of PROC and VARCOMP and results in estimates of additive and non-additive genetic variation. The procedures described can be modified to work on most statistical software packages which can compute variance component estimates. The...

Factor analysis of the catatonia rating scale and catatonic symptom distribution across four diagnostic groups.

PubMed

Krüger, Stephanie; Bagby, R Michael; Höffler, Jürgen; Bräunig, Peter

2003-01-01

Catatonia is a frequent psychomotor syndrome, which has received increasing recognition over the last decade. The assessment of the catatonic syndrome requires systematic rating scales that cover the complex spectrum of catatonic motor signs and behaviors. The Catatonia Rating Scale (CRS) is such an instrument, which has been validated and which has undergone extensive reliability testing. In the present study, to further validate the CRS, the items composing this scale were submitted to principal components factor extraction followed by a varimax rotation. An analysis of variance (ANOVA) was performed to assess group differences on the extracted factors in patients with schizophrenia, pure mania, mixed mania, and major depression (N=165). Four factors were extracted, which accounted for 71.5% of the variance. The factors corresponded to the clinical syndromes of (1) catatonic excitement, (2) abnormal involuntary movements/mannerisms, (3) disturbance of volition/catalepsy, and (4) catatonic inhibition. The ANOVA revealed that each of the groups showed a distinctive catatonic symptom pattern and that the overlap between diagnostic groups was minimal. We conclude that this four-factor symptom structure of catatonia challenges the current conceptualization, which proposes only two symptom subtypes.

Initial polishing time affects gloss retention in resin composites.

PubMed

Waheeb, Nehal; Silikas, Nick; Watts, David

2012-10-01

To determine the effect of finishing and polishing time on the surface gloss of various resin-composites before and after simulated toothbrushing. Eight representative resin-composites (Ceram X mono, Ceram X duo, Tetric EvoCeram, Venus Diamond, EsteliteSigma Quick, Esthet.X HD, Filtek Supreme XT and Spectrum TPH) were used to prepare 80 disc-shaped (12 mm x 2 mm) specimens. The two step system Venus Supra was used for polishing the specimens for 3 minutes (Group A) and 10 minutes (Group B). All specimens were subjected to 16,000 cycles of simulated toothbrushing. The surface gloss was measured after polishing and after brushing using the gloss meter. Results were evaluated using one way ANOVA, two ways ANOVA and Dennett's post hoc test (P = 0.05). Group B (10-minute polishing) resulted in higher gloss values (GV) for all specimens compared to Group A (3 minutes). Also Group B showed better gloss retention compared to Group A after simulated toothbrushing. In each group, there was a significant difference between the polished composite resins (P < 0.05). For all specimens there was a decrease in gloss after the simulated toothbrushing.

The effect of arginine supplementation on growth hormone release and intestinal mucosal growth after massive small bowel resection in growing rats.

PubMed

Hebiguchi, T; Kato, T; Yoshino, H; Mizuno, M; Koyama, K

1997-08-01

Four-week-old male Sprague-Dawley rats underwent a 90% small bowel resection. From the fourth day after surgery, they were divided into group 1 and 2, and pair-fed by elemental diets (0.8 kcal/mL, 50 mL/day) with L-arginine (n = 10) or L-glycine (n = 11) as an isonitrogenous and isoenergetic supplement for 3 weeks. They were compared with each other 3 weeks after surgery. A statistical analysis was performed using the unpaired Student's t test and the one-way factorial analysis of variance (ANOVA) using Bonferroni/Dunn multiple comparison test. A Pvalue of < .05 was considered significant. There were no significant differences between the two groups in food intake, body weight, tail length, residual ileal length, and plasma IGF-I level. However, the mean height of ileal villi in group 1 showed higher than that in group 2 (P < .01). Growth hormone-releasing hormone (GHRH) provocative tests (1 microg per rat, intravenously) showed the more significant elevation of growth hormone IGH) secretion in the arginine supplement group than that of glycine supplement group at 5 minutes (P < .05). There were no significant differences between basal levels of plasma rat GH in both groups. It is suggested that arginine has a possible significant role of GH secretion and intestinal mucosal growth after massive small bowel resection.

Changing core beliefs with trial-based cognitive therapy may improve quality of life in social phobia: a randomized study.

PubMed

Powell, Vania Bitencourt; Oliveira, Olivia Haun de; Seixas, Camila; Almeida, Cláudia; Grangeon, Maria Conceição; Caldas, Milke; Bonfim, Thaís Delavechia; Castro, Martha; Galvão-de Almeida, Amanda; Galvão-de Almeida; Moraes, Roberta de Oliveira; Sudak, Donna; de-Oliveira, Irismar Reis

2013-01-01

To determine whether there are differences in quality of life (QoL) improvement after treatment with the trial-based thought record (TBTR) versus conventional cognitive therapy (CCT) in patients with social anxiety disorder (SAD). A randomized trial comparing TBTR with a set of CCT techniques, which included the standard 7-column dysfunctional thought record (DTR) and the positive data log (PDL) in patients with SAD, generalized type. Repeated measures analysis of variance (ANOVA) revealed a significant time effect in the general health, vitality, social functioning, and mental health domains of the Short Form 36. It also indicated significant treatment effects on the bodily pain, social functioning, role-emotional, and mental health domains, with higher scores in the TBTR group. One-way analysis of covariance (ANCOVA), using pretreatment values as covariates, showed that TBTR was associated with significantly better QoL post-treatment (bodily pain, social functioning and role-emotional) and at follow-up (role-emotional). A significant treatment effect on the role-emotional domain at 12-month follow-up denoted a sustained effect of TBTR relative to CCT. This study provided preliminary evidence that TBTR is at least as effective as CCT in improving several domains of QoL in SAD, specifically when the standard 7-column DTR and the PDL are used.

Bisphenol A release from an orthodontic adhesive and its correlation with the degree of conversion on varying light-curing tip distances.

PubMed

Sunitha, Catherine; Kailasam, Vignesh; Padmanabhan, Sridevi; Chitharanjan, Arun B

2011-08-01

The aims of this research were to use high-performance liquid chromatography to assess the bisphenol A (BPA) released from an orthodontic adhesive (Transbond XT; 3M Unitek, Monrovia, Calif) with various light-curing tip distances and to correlate the release to the degree of conversion. One hundred thirty-eight premolar brackets were divided into 3 groups of 40 each for the high-performance liquid chromatography analysis and 3 groups of 6 each for assessing the degree of conversion. Fourier transform infrared spectroscopy was used for this purpose. Each group was studied at light-curing tip distances of 0, 5, and 10 mm. Statistical analyses were performed by using 2-way analysis of variance (ANOVA), post-hoc multiple comparisons Tukey HSD tests, and paired t tests. Pearson correlation was used to assess the correlation between the degree of conversion and BPA release. BPA release was greater in specimens cured with a greater light-curing tip distance. The degree of conversion decreased with increased light-curing tip distances. A negative correlation was found between BPA release and degree of conversion. Clinicians should ensure that the adhesive is completely cured by keeping the light-curing tip as close to the adhesive as clinically possible. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Determination of essential and toxic elements in Cordyceps kyushuensis Kawam by inductively coupled plasma mass spectrometry.

PubMed

Zhang, Guoying; Zhao, Yanxin; Liu, Fengjun; Ling, Jianya; Lin, Jianqiang; Zhang, Changkai

2013-01-01

In this study, a total of 20 elements (essential, non-essential and toxic): lithium (Li), sodium (Na), potassium (K), gallium (Ga), magnesium (Mg), zinc (Zn), iron (Fe), copper (Cu), manganese (Mn), vanadium (V), chromium (Cr), nickel (Ni), cobalt (Co), molybdenum (Mo), selenium (Se), barium (Ba), tin (Sn), arsenic (As), lead (Pb) cadmium (Cd) and mercury (Hg) in natural and cultured Cordyceps kyushuensis have been determined by means of inductively coupled plasma mass spectrometry (ICP-MS). Cultured stroma, natural stroma and natural worm were digested by microwave-assisted method before analysis. The proposed ICP-MS method was validated by analyzing a certified reference material (CRM) GBW10015 (spinach). The results of one-way analysis of variance (ANOVA) revealed that the element concentrations in the three kinds of samples were significantly different (p<0.05). Except for Mg, Zn, Cu, the values of other elemental contents were the highest in the stroma of natural C. kyushuensis. In comparison with the worm, the concentrations of determined elements in wild stroma were higher. The remarkable difference of elemental contents between cultured and natural stroma may be caused by distinct growing environment. This finding highlighted the usefulness of ICP-MS elemental analysis and enhanced the value of C. kyushuensis as a candidate for nourishing food based on its composition. Copyright © 2012 Elsevier B.V. All rights reserved.

Spectrophotometric Evaluation of Colour Stability of Nano Hybrid Composite Resin in Commonly Used Food Colourants in Asian Countries.

PubMed

Chittem, Jyothi; Sajjan, Girija S; Varma Kanumuri, Madhu

2017-01-01

There is growing interest in colour stability of aesthetic restorations. So far few studies have been reported. This study was designed to investigate the effects of different common food colourants i.e., Turmeric and Carmoisine (orange red dye) consumed by patients in Asian countries on a recent nano hybrid composite resin. A total of sixty disk shaped specimens measuring 10 mm in diameter and 2 mm in thickness were prepared. The samples were divided into two groups {Z 100 (Dental restorative composite) Filtek Z 250 XT (Nano hybrid universal restorative)}. Baseline colour measurement of all specimens were made using reflectance spectrophotometer with CIE L*a*b* system. Specimens were immersed in artificial saliva and different experimental solutions containing food colourants (carmoisine solution and turmeric solution) for three hours per day at 37°C. Colour measurements were made after 15 days. Colour difference (ΔE*) was calculated. Mean values were compared by one-way analysis of variance (ANOVA). Multiple range test by Tukey Post-hoc test procedure was employed to identify the significant groups at 5% level. Z 100 showed minimum staining capacity when compared to Z 250 XT in both the colourant solutions. The nanohybrid composite resin containing TEGDMA showed significant colour change when compared to that of microhybrid composite resin as a result of staining in turmeric and carmoisine solution.

An In vitro Comparison of Apically Extruded Debris Using Reciproc, ProTaper Universal, Neolix and Hyflex in Curved Canals.

PubMed

Labbaf, Hossein; Nazari Moghadam, Kiumars; Shahab, Shahriar; Mohammadi Bassir, Mahshid; Fahimi, Mohammad Amin

2017-01-01

As a consequence of root canal preparation, dentinal chips, irrigants and pulp remnants are extruded into preradicular space. This phenomenon may lead to post endodontic flare-ups. The purpose of this study was to compare the amount of extruded debris with four endodontic NiTi engine-driven systems. Sixty mesiobuccal roots of maxillary molars with 15-30˚ curvature were divided randomly into four groups ( n =15). Each group was instrumented up to apical size of 25 using Reciproc, ProTaper Universal, Neolix and Hyflex. Bidistilled water was used as irrigant and extruded debris was collected in pre-weighted Eppendorf tubes. Tubes were stored in incubator for drying the debris. Extruded debris were weighted in electronic microbalance with accuracy of 0.0001 g. The raw data was analyzed with one way analysis of variance (ANOVA) and Tukey's HSD post hoc test. Level of significance was set at 0.05. The debris extrusion with Reciproc files was significantly higher than the other groups ( P <0.05). Hyflex significantly extruded less debris than other files ( P <0.05). There was no significant difference between ProTaper Universal and Neolix regarding the amount of extruded debris ( P =0.98). All systems extruded debris during the instrumentation. Reciproc system significantly extruded more debris. Caution should be taken when interpreting the results of this study and applying it to the real clinical situation.

Premedication with oral alprazolam and melatonin combination: a comparison with either alone--a randomized controlled factorial trial.

PubMed

Pokharel, Krishna; Tripathi, Mukesh; Gupta, Pramod Kumar; Bhattarai, Balkrishna; Khatiwada, Sindhu; Subedi, Asish

2014-01-01

We assessed if the addition of melatonin to alprazolam has superior premedication effects compared to either drug alone. A prospective, double blind placebo controlled trial randomly assigned 80 adult patients (ASA 1&2) with a Visual Analogue Score (VAS) for anxiety ≥ 3 to receive a tablet containing a combination of alprazolam 0.5 mg and melatonin 3 mg, alprazolam 0.5 mg, melatonin 3 mg, or placebo orally 90 min before a standard anesthetic. Primary end points were change in anxiety and sedation score at 15, 30, and 60 min after premedication, and number of patients with loss of memory for the five pictures shown at various time points when assessed after 24 h. One-way ANOVA, Friedman repeated measures analysis of variance, Kruskal Wallis and chi square tests were used as relevant. Combination drug produced the maximum reduction in anxiety VAS (3 (1.0-4.3)) from baseline at 60 min (P < 0.05). Sedation scores at various time points and number of patients not recognizing the picture shown at 60 min after premedication were comparable between combination drug and alprazolam alone. Addition of melatonin to alprazolam had superior anxiolysis compared with either drugs alone or placebo. Adding melatonin neither worsened sedation score nor the amnesic effect of alprazolam alone. This study was registered, approved, and released from ClinicalTrials.gov. Identifier number: NCT01486615.

Disability management practices in education, hotel/motel, and health care workplaces.

PubMed

Williams, Renee M; Westmorland, Muriel G; Shannon, Harry S; Rasheed, Farah; Amick, Benjamin C

2005-03-01

The high costs and the impact of work disability have become a growing concern for workplaces. As a result, workplace disability management approaches have been developed to lower disability costs, protect the employability of workers, and promote early return to work. A stratified random sample of 455 employers in education (n = 157), hotel/motel (n = 110), and health care (n = 188) sectors who completed a mailed Organizational Policies and Practices (OPP) questionnaire is reported. The OPP questionnaire asked questions about eight workplace disability management practices. The article examined the multi-dimensionality, internal consistency, and discriminant validity of the OPP and compares disability management practices across the three sectors. The OPP questionnaire showed good internal consistency (Cronbach's alpha = 0.95) and discriminant validity. A one-way analysis of variance (ANOVA) for each of the eight subscales demonstrated that there were statistically significant differences between the sectors in ergonomic practices (F (2,452) = 15.8, P < 0.001), disability case management (F (2,452) = 4.6, P < 0.01), return to work (F (2,452) = 10.3, P < 0.001), and people-oriented culture (F (2,452) = 4.5, P < 0.01). On examining disability management practices in education, hotel/motel, and health care sectors, the OPP seems to be a promising instrument that can be used to assess and monitor how employers are managing disability.

Evaluation of apically extruded debris during root canal preparation in primary molar teeth using three different rotary systems and hand files.

PubMed

Topçuoğlu, Gamze; Topçuoğlu, Hüseyin Sinan; Akpek, Firdevs

2016-09-01

To assess the amount of debris extruded apically during root canal preparation using various nickel titanium instrumentation systems and hand files in primary molar teeth. Sixty extracted primary first mandibular molar human teeth were randomly assigned to four groups (n = 15 teeth for each group). The canals were then instrumented with the following instrument systems: Revo-S, Mtwo, ProTaper Next, and hand files. Apically extruded debris during instrumentation was collected into pre-weighed Eppendorf tubes. The Eppendorf tubes were then stored in an incubator at 70°C for 5 days. The weight of the dry extruded debris was established by subtracting the pre-instrumentation and post-instrumentation weight of the Eppendorf tubes for each group. The data were analyzed using one-way analysis of variance (anova) and Tukey's post hoc tests. ProTaper Next files were associated with less apically extruded debris than the Mtwo, Revo-S, and hand files (P < 0.05). Hand files extruded more debris than Mtwo and Revo-S instruments (P < 0.05), but there was no significant difference found between the Mtwo and Revo-S instruments (P > 0.05). All instruments were associated with apical extrusion of debris. ProTaper Next files caused less debris extrusion compared to the other systems used. © 2015 BSPD, IAPD and John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Quality and content of internet-based information on temporomandibular disorders.

PubMed

Park, Min Woo; Jo, Jeong Hwan; Park, Ji Woon

2012-01-01

To use a range of evaluation instruments to assess the content and quality of websites about temporomandibular disorders (TMD) and thereby provide guidance regarding the actual accuracy and comprehensiveness of the information of the sites. Sixty-seven websites resulting from an Internet search with the word "TMD" were evaluated using Journal of the American Medical Association (JAMA), DISCERN, and Health on the Net (HON) criteria, along with an evaluation method to assess the scientific quality of the website contents. Results were compared according to reviewer, website type, and presence of HON seal. One-way analysis of variance (ANOVA), Student t test, chi-square test, and Pearson correlation analysis were used as appropriate. The mean content, HON, and DISCERN scores were 38.9%, below 50%, and 53.9% of the maximum possible score, respectively. Fewer than 50% of the sites displayed the author or reference of the information according to the JAMA benchmarks criteria. Every evaluation criteria showed good agreement among reviewers. Commercial websites were the most common, while sites of nonprofit organizations showed the highest content scores. The overall quality was poor to moderate for all website types. Sites concerning TMD were poorly organized and maintained. Also, most sites contained insufficient or scientifically incorrect information that could have a negative effect on the treatment outcome and prognosis of TMD. Clinicians should guide patients to reputable sources of information that will enhance patient comprehension and better treatment outcomes.

Effect of fluorides from various restorative materials on remineralization of adjacent tooth: an in vitro study.

PubMed

Baliga, M S; Bhat, S S

2010-01-01

The aim of the study was to evaluate the extent of surface zone remineralization and the effect of fluoride at the inter-proximal adjacent tooth surface, using restorative materials FusionAlloy, Ketac-Fil and Heliomolar. Ninety extracted molar teeth were used of which 45 were placed in artificial caries for 10 weeks. The remaining 45 teeth were filled with the respective restorative materials, mounted with the artificial carious teeth in proximal contact with plaster and placed in artificial saliva for a period of 28 days. Finally, sectioning of artificially carious teeth was done mesio-distally and observed under the optical microscope and scanning electron microscope. Comparison among the groups was done by one-way analysis of variance [ANOVA] and Fischer's F test. Intercomparison between the groups was done by using Dunnett's t-test. Results obtained from transmitted electron microscopic and scanning electron microscopic observations were almost similar with the Ketac-Fil and Heliomolar showing better results in surface zone remineralization compared to FusionAlloy. Also, Ketac-Fil is a good material in releasing fluoride to remineralize enamel when compared to Heliomolar and FusionAlloy. Thus, it can be used mainly in class II cavity restorations of primary and permanent dentitions due to the potential ability of fluoride containing glass ionomer cements and composite resins to remineralize incipient carious lesions on adjacent teeth.

Wound healing activity of Argyreia nervosa leaves extract

PubMed Central

Singhal, AK; Gupta, H; Bhati, VS

2011-01-01

Background: Argyreia nervosa (Convolvulaceae) plant is an example of hallucinogenic plant. The antiseptic, anti-inflammatory, antispasmodic, antibacterial, antiviral, antifungal, anticonvulsant, nootropic, antifertility and aphrodisiac properties have already been reported for this plant. Aim: The aim of present work was to evaluate the wound healing property in normal and diabetic animals by oral and topical administration of ethanolic extract of leaves. Materials and Methods: Phytochemical investigations showed the presence of various biochemicals (alkaloids, flavonoids, carbohydrates, triterpenoids, proteins, saponins, steroids, tannins). A single injection of alloxan monohydrate (120 mg/kg, i.p.) prepared in citrate buffer (0.1 M, pH 4.5) was administered to produce diabetes in rats and mice, after overnight fasting. Excision wounds (sized 300 mm2 and of 2 mm depth) were used for the study of rate of contraction of wound and epithelization. The means of wound area measurement between groups at different time intervalswere compared using one-way analysis of variance (ANOVA), followed by Dunnet's test. Results: Extracts of A. nervosa showed significant wound healing effect in normal (topically treated) and diabetic (both topically and orally treated) rats. In diabetic rats, the topically treated group showed more significant effect than the orally treated groups. Conclusion: The present study demonstrates that A. nervosa leaves extract applied topically promotes healing of wounds more significantly as compared to oral application, in both normal rats and alloxan induced diabetic rats, where healing is otherwise delayed. PMID:23776770

An In vitro Comparison and Evaluation of Sealing Ability of Newly Introduced C-point System, Cold Lateral Condensation, and Thermoplasticized Gutta-Percha Obturating Technique: A Dye Extraction Study.

PubMed

Sinhal, Tapati Manohar; Shah, Ruchi Rani Purvesh; Jais, Pratik Subhas; Shah, Nimisha Chinmay; Hadwani, Krupali Dhirubhai; Rothe, Tushar; Sinhal, Neha Nilesh

2018-01-01

The aim of this study is to compare and to evaluate sealing ability of newly introduced C-point system, cold lateral condensation, and thermoplasticized gutta-percha obturating technique using a dye extraction method. Sixty extracted maxillary central incisors were decoronated below the cementoenamel junction. Working length was established, and biomechanical preparation was done using K3 rotary files with standard irrigation protocol. Teeth were divided into three groups according to the obturation protocol; Group I-Cold lateral condensation, Group II-Thermoplasticized gutta-percha, and Group III-C-Point obturating system. After obturation all samples were subjected to microleakage assessment using dye extraction method. Obtained scores will be statistical analyzed using ANOVA test and post hoc Tukey's test. One-way analysis of variance revealed that there is significant difference among the three groups with P value (0.000 < 0.05). Tukey's HSD post hoc tests for multiple comparisons test shows that the Group II and III perform significantly better than Group I. Group III performs better than Group II with no significant difference. All the obturating technique showed some degree of microleakage. Root canals filled with C-point system showed least microleakage followed by thermoplasticized obturating technique with no significant difference among them. C-point obturation system could be an alternative to the cold lateral condensation technique.

Effects of novel tubing gait on neuromuscular imbalance in cerebral palsy.

PubMed

Shin, Yoon Kyum; Lee, Dong Ryul; Kim, Do Hyun; Lee, Jae Jin; You, Sung Joshua Hyun; Yi, Chung Hwi; Jeon, Hye Seon

2014-01-01

Gait impairments from a neuromuscular imbalance are crucial issues in cerebral palsy. The purpose of our study was to compare the effects of the assistive tubing gait (ATG) and assistive-resistive tubing gait (ARTG) on improving the vasti and hamstring muscle imbalance during the initial contact to mid-stance phases in individuals with spastic diplegic cerebral palsy (CP). Fourteen age-matched individuals including seven normal individuals (11.7 years) and seven individuals with CP (12.9 years) were recruited. All participants underwent electromyography (EMG) measurement of the unilateral vasti and hamstring muscle activity during the three gait training conditions of no-tubing gait (NTG), ATG, and ARTG. A statistical one-way repeated-measure analysis of variance (ANOVA) was used to determine differences in the vasti and hamstring activity, the vasti/hamstring ratio, and the knee joint angle across the three gait training conditions for each group. The initial vasti and hamstring muscle imbalance in CP was significantly improved by applying the ARTG compared with the ATG. The vasti/hamstring ratio during the ARTG was compatible with the ratio value obtained from the NTG of normal individuals. The knee joint angle in CP was not improved in this short-term intervention. The ARTG proportionately increased the vasti activation and reciprocally inhibited the hamstring activity, subsequently improving the neuromuscular imbalance associated with the flexed-knee gait in individuals with spastic diplegic CP.

Acute Effects of Ecstasy on Memory Are more Extensive than Chronic Effects.

PubMed

Shariati, Mohamad Bakhtiar Hesam; Sohrabi, Maryam; Shahidi, Siamak; Nikkhah, Ali; Mirzaei, Fatemeh; Medizadeh, Mehdi; Asl, Sara Soleimani

2014-01-01

Exposure to 3, 4- methylenedioxymethamphetamine (MDMA) could lead to serotonergic system toxicity in the brain. This system is responsible for learning and memory functions. Studies show that MDMA causes memory impairment dose-dependently and acutely. The present study was designed to evaluate the chronic and acute effects of MDMD on spatial memory and acquisition of passive avoidance. Adult male Wistar rats (200-250 g) were given single or multiple injections of MDMA (10 mg/kg, IP). Using passive avoidance and Morris Water Maze (MWM) tasks, learning and spatial memory functions were assessed. The data were analyzed by SPSS 16 software and one- way analysis of variance (ANOVA) test. Our results showed that there were significant differences in latency to enter the dark compartment (STL) between sham and MDMA- treated groups. Acute group significantly showed more STL in comparison with chronic group. Furthermore, MDMA groups spent more time in dark compartment (TDS) than the sham group. Administration of single dose of MDMA significantly caused an increase in TDS compared with the chronic group. In the MWM, MDMA treatment significantly increased the traveled distance and escaped latency compared to the sham group. Like to passive avoidance task, percentage of time spent in the target quadrant in MDMA- treated animals impaired in MWM compared with sham group. These data suggest that MDMA treatment impairs learning and memory functions that are more extensive in acute- treated rats.

Cytotoxicity and cytokine expression induced by silorane and methacrylate-based composite resins.

PubMed

Longo, Daniele Lucca; Paula-Silva, Francisco Wanderley Garcia; Faccioli, Lucia Helena; Gatón-Hernández, Patrícia Maria; Queiroz, Alexandra Mussolino de; Silva, Léa Assed Bezerra da

2016-01-01

The aim of this study was to evaluate cytotoxicity and cytokine production induced by light-cured or non-light-cured methacrylate-based and silorane composite resins in RAW 264.7 macrophages. Cells were stimulated with the extracts from light-cured or non-light-cured composite resins. After incubation for 24 h, cytotoxicity was assessed with the lactate dehydrogenase (LDH) and methyl thiazolyl tetrazolium (MTT) assays, and total protein was quantified using the Lowry method. TNF-α detection was examined with an enzyme-linked immunosorbent assay (ELISA) conducted with cell supernatants after cell stimulation for 6, 12, and 24 h. Data were analyzed using one-way analysis of variance (ANOVA) and Tukey's post hoc test (α=0.05). KaloreTM and FiltekTM Silorane were cytotoxic with or without light curing (p<0.05) after 24 h of incubation. KaloreTM stimulated the early production of TNF-α in comparison with control (p<0.05), whereas FiltekTM Silorane did not affect TNF-α levels after 6 and 12 h (p>0.05). However, after 24 h FiltekTM Silorane inhibited the production of TNF-α (p<0.05). KaloreTM and FiltekTM Silorane were cytotoxic regardless of light curing. The extract obtained from KaloreTM after 15 days of incubation stimulated the production of TNF-α, unlike that obtained from FiltekTM Silorane.

Variations in hospital worker perceptions of safety culture.

PubMed

Listyowardojo, Tita Alissa; Nap, Raoul E; Johnson, Addie

2012-02-01

To compare the attitudes toward and perceptions of institutional practices that can influence patient safety between all professional groups at a university medical center. A questionnaire measuring nine dimensions of organizational and safety culture was distributed to all hospital workers. Each item was rated on a 1 ('strongly disagree') to 5 ('strongly agree') scale. Professionals (2995), grouped as 'physicians' (16.6%), 'nurses' (40.3%), 'clinical workers' (e.g. psychologists; 21.7%), 'laboratory workers' (e.g. technicians; 11%) and 'non-medical workers' (e.g. managers; 10.4%). One-way analysis of variances (ANOVAs) carried out separately on each dimension with professional group as the independent variable of interest. Differences in ratings of organizational and safety culture were found across professional groups. Physicians and non-medical workers tended to rate the dimensions of organizational and safety culture more positively than did nurses, clinical workers and laboratory workers. For example, physicians gave more positive ratings of 'institutional commitment to safety' than did nurses, clinical workers and laboratory workers (mean = 3.71 vs. 3.62, 3.61 and 3.58, respectively, P < 0.01) and non-medical workers gave more positive ratings than did physicians, nurses, clinical workers and laboratory workers to 'perceptions towards the hospital' (mean = 3.69 vs. 3.39, 3.36, 3.49 and 3.47, respectively, P < 0.001). Interventions to promote safety culture should be tailored to the target group as attitudes and perceptions may differ among groups.

Body Image of Highly Trained Female Athletes Engaged in Different Types of Sport.

PubMed

Kantanista, Adam; Glapa, Agata; Banio, Adrianna; Firek, Wiesław; Ingarden, Anna; Malchrowicz-Mośko, Ewa; Markiewicz, Paweł; Płoszaj, Katarzyna; Ingarden, Mateusz; Maćkowiak, Zuzanna

2018-01-01

The aim of the study was to evaluate differences in body image across different types of sports in highly trained female athletes. 242 female individuals, aged 13-30 years (M = 20.0, SD = 4.5), representing aesthetic sports ( n = 56) and nonaesthetic sports ( n = 186), were recruited from different sports clubs in Poland. Body image, BMI, age, the level of competition attained, and the training background of participants were recorded. One-way ANOVA showed differences in the body image of athletes engaged in different types of sport ( F (11,230) = 4.10, p < 0.001, and η 2 = 0.16). The model predicting the body image of female athletes was significant ( F (5,236) = 10.40, p < 0.001); the adjusted R 2 = 0.163. Type of sport explained 7.1% ( β = -0.263, p < 0.001), age explained 4.5% ( β = 0.341, p < 0.001), BMI explained 3.6% ( β = -0.230, p < 0.001), and level of competition explained 0.9% ( β = 0.153, p < 0.05) of variance in body image. The findings provide vital new knowledge which can be used by researchers and practitioners in designing educational programs on weight-related behaviors in female athletes. Such programs should be implemented especially in young female athletes participating in high-level sporting activities at an early stage.

Body Image of Highly Trained Female Athletes Engaged in Different Types of Sport

PubMed Central

Glapa, Agata; Banio, Adrianna; Firek, Wiesław; Ingarden, Anna; Malchrowicz-Mośko, Ewa; Markiewicz, Paweł; Płoszaj, Katarzyna; Ingarden, Mateusz; Maćkowiak, Zuzanna

2018-01-01

Background The aim of the study was to evaluate differences in body image across different types of sports in highly trained female athletes. Methods 242 female individuals, aged 13–30 years (M = 20.0, SD = 4.5), representing aesthetic sports (n = 56) and nonaesthetic sports (n = 186), were recruited from different sports clubs in Poland. Body image, BMI, age, the level of competition attained, and the training background of participants were recorded. Results One-way ANOVA showed differences in the body image of athletes engaged in different types of sport (F(11,230) = 4.10, p < 0.001, and η2 = 0.16). The model predicting the body image of female athletes was significant (F(5,236) = 10.40, p < 0.001); the adjusted R2 = 0.163. Type of sport explained 7.1% (β = –0.263, p < 0.001), age explained 4.5% (β = 0.341, p < 0.001), BMI explained 3.6% (β = –0.230, p < 0.001), and level of competition explained 0.9% (β = 0.153, p < 0.05) of variance in body image. Conclusions The findings provide vital new knowledge which can be used by researchers and practitioners in designing educational programs on weight-related behaviors in female athletes. Such programs should be implemented especially in young female athletes participating in high-level sporting activities at an early stage. PMID:29662894

Aflatoxin formation and gene expression in response to carbon source media shift in Aspergillus parasiticus.

PubMed

Wilkinson, J R; Yu, J; Abbas, H K; Scheffler, B E; Kim, H S; Nierman, W C; Bhatnagar, D; Cleveland, T E

2007-10-01

Aflatoxins are toxic and carcinogenic polyketide metabolites produced by fungal species, including Aspergillus flavus and A. parasiticus. The biosynthesis of aflatoxins is modulated by many environmental factors, including the availability of a carbon source. The gene expression profile of A. parasiticus was evaluated during a shift from a medium with low concentration of simple sugars, yeast extract (YE), to a similar medium with sucrose, yeast extract sucrose (YES). Gene expression and aflatoxins (B1, B2, G1, and G2) were quantified from fungal mycelia harvested pre- and post-shifting. When compared with YE media, YES caused temporary reduction of the aflatoxin levels detected at 3-h post-shifting and they remained low well past 12 h post-shift. Aflatoxin levels did not exceed the levels in YE until 24 h post-shift, at which time point a tenfold increase was observed over YE. Microarray analysis comparing the RNA samples from the 48-h YE culture to the YES samples identified a total of 2120 genes that were expressed across all experiments, including most of the aflatoxin biosynthesis genes. One-way analysis of variance (ANOVA) identified 56 genes that were expressed with significant variation across all time points. Three genes responsible for converting norsolorinic acid to averantin were identified among these significantly expressed genes. The potential involvement of these genes in the regulation of aflatoxin biosynthesis is discussed.

Volumetric Evaluation of Different Obturation Techniques in Primary Teeth Using Spiral Computed Tomography.

PubMed

Nagaveni, N B; Yadav, Sneha; Poornima, P; Reddy, Vv Subba; Roshan, N M

Various obturation techniques have been evaluated for better filling of the root canals in primary teeth using different methods. Spiral Computed Tomography (SCT) is a new revolution in the pediatric endodontics for assessment of quality of the obturation from 3 dimensions. To evaluate the efficiency of 5 different obturation methods in delivering the filling material into the canals of primary teeth using Spiral Computed Tomography scan. A total of 50 canals of primary teeth were prepared, divided into 5 groups with 10 canals in each group and obturated with Zinc Oxide Eugenol cement using 5 different obturation techniques such as Local anesthetic syringe, Tuberculin syringe, Endodontic plugger, hand held Lentulo-spiral, and Lentulo-spiral mounted on slow speed hand piece. The pre and post obturation volume and finally the Percentage of Obturated Volume (POV) were calculated using SCT scan for each group. The data obtained was statistically analyzed using One-way Analysis of Variance (ANOVA) and Tukey's post-hoc test. Lentulo-spiral hand held showed highest POV value followed by Lentulospiral mounted to hand piece, Tuberculin syringe and Endodontic plugger; whereas Anesthetic syringe had least POV (P < 0.05). Lentulo-spiral hand held is the best obturating technique among the 5 groups evaluated as the canals of this group showed maximum percentage of filled material. However, a further study with large sample size is highly essential.

Split-Step Timing of Professional and Junior Tennis Players

PubMed Central

Leskosek, Bojan; Filipcic, Tjasa

2017-01-01

Abstract The purpose of the study was to determine the timing of a split-step in three categories of tennis players in four groups of strokes. Subjects were divided into three groups: male and female junior, and male professional tennis players. During two tournaments, all matches were recorded with two fixed video cameras. For every stroke, the timing of the split-step between the opponent’s impact point when hitting the ball and the player’s split-step was measured. A two-way analysis of variance (ANOVA) was used to determine the differences between groups of strokes, players and the interaction Player x Stroke Group. A Tukey post-hoc test was employed to determine specific differences. The results revealed differences between players in detecting the opponent’s movement, stroke and ball flight, which were reflected in different split-step timings. Each tennis player has his/her own timing mechanism which they adapt to various game situations. Response times differ significantly depending on the game situation. On average, they are the lowest in the serve, and then gradually rise from the return of the serve to baseline game, reaching the highest values in specific game situations. Players react faster in the first serve than in the second one and in the return of the serve, the response times are lower after the return of the second serve PMID:28210342

Marginal Accuracy and Internal Fit of 3-D Printing Laser-Sintered Co-Cr Alloy Copings.

PubMed

Kim, Myung-Joo; Choi, Yun-Jung; Kim, Seong-Kyun; Heo, Seong-Joo; Koak, Jai-Young

2017-01-23

Laser sintered technology has been introduced for clinical use and can be utilized more widely, accompanied by the digitalization of dentistry and the development of direct oral scanning devices. This study was performed with the aim of comparing the marginal accuracy and internal fit of Co-Cr alloy copings fabricated by casting, CAD/CAM (Computer-aided design/Computer-assisted manufacture) milled, and 3-D laser sintered techniques. A total of 36 Co-Cr alloy crown-copings were fabricated from an implant abutment. The marginal and internal fit were evaluated by measuring the weight of the silicone material, the vertical marginal discrepancy using a microscope, and the internal gap in the sectioned specimens. The data were statistically analyzed by One-way ANOVA (analysis of variance), a Scheffe's test, and Pearson's correlation at the significance level of p = 0.05, using statistics software. The silicone weight was significantly low in the casting group. The 3-D laser sintered group showed the highest vertical discrepancy, and marginal-, occlusal-, and average- internal gaps ( p < 0.05). The CAD/CAM milled group revealed a significantly high axial internal gap. There are moderate correlations between the vertical marginal discrepancy and the internal gap variables ( r = 0.654), except for the silicone weight. In this study, the 3-D laser sintered group achieved clinically acceptable marginal accuracy and internal fit.

Marginal Accuracy and Internal Fit of 3-D Printing Laser-Sintered Co-Cr Alloy Copings

PubMed Central

Kim, Myung-Joo; Choi, Yun-Jung; Kim, Seong-Kyun; Heo, Seong-Joo; Koak, Jai-Young

2017-01-01

Laser sintered technology has been introduced for clinical use and can be utilized more widely, accompanied by the digitalization of dentistry and the development of direct oral scanning devices. This study was performed with the aim of comparing the marginal accuracy and internal fit of Co-Cr alloy copings fabricated by casting, CAD/CAM (Computer-aided design/Computer-assisted manufacture) milled, and 3-D laser sintered techniques. A total of 36 Co-Cr alloy crown-copings were fabricated from an implant abutment. The marginal and internal fit were evaluated by measuring the weight of the silicone material, the vertical marginal discrepancy using a microscope, and the internal gap in the sectioned specimens. The data were statistically analyzed by One-way ANOVA (analysis of variance), a Scheffe’s test, and Pearson’s correlation at the significance level of p = 0.05, using statistics software. The silicone weight was significantly low in the casting group. The 3-D laser sintered group showed the highest vertical discrepancy, and marginal-, occlusal-, and average- internal gaps (p < 0.05). The CAD/CAM milled group revealed a significantly high axial internal gap. There are moderate correlations between the vertical marginal discrepancy and the internal gap variables (r = 0.654), except for the silicone weight. In this study, the 3-D laser sintered group achieved clinically acceptable marginal accuracy and internal fit. PMID:28772451

Effect of a six month yoga exercise intervention on fitness outcomes for breast cancer survivors

PubMed Central

Hughes, Daniel C.; Darby, Nydia; Gonzalez, Krystle; Boggess, Terri; Morris, Ruth M.; Ramirez, Amelie G.

2016-01-01

Yoga-based exercise has proven to be beneficial for practitioners, including cancer survivors. This study reports on the improvements in physical fitness for 20 breast cancer survivors who participated in a six-month yoga-based (YE) exercise program. Results are compared to a comprehensive exercise (CE) program group and a comparison (C) exercise group who chose their own exercises. “Pre” and “post” fitness assessments included measures of anthropometrics, cardiorespiratory capacity, strength and flexibility. Descriptive statistics, effect size (d), dependent sample ‘t’ tests for all outcome measures were calculated for the YE group. Significant improvements included: decreased % body fat (−3.00%, d = −0.44, p < 0.001); increased sit to stand leg strength repetitions (2.05, d = 0.48, p = 0.003); forward reach (3.59 cm, d = 0.61, p = 0.01); and right arm sagittal range of motion (6.50°, d = 0.92, p= 0.05). To compare YE outcomes with the other two groups, a one-way analysis of variance (ANOVA) was used. YE participants significantly outperformed C participants on “forward reach” (3.59 cm gained versus −2.44 cm lost), (p = 0.009) and outperformed CE participants (3.59 cm gained versus 1.35 cm gained), but not statistically significant. Our results support yoga-based exercise modified for breast cancer survivors as safe and effective. PMID:26395825