Management of the Post-Shuttle Extravehicular Mobility Unit (EMU) Water Circuits

NASA Technical Reports Server (NTRS)

Steele, John W.; Etter, David; Rector, Tony; Hill, Terry; Wells, Kevin

2012-01-01

The EMU incorporates two separate water circuits for the rejection of metabolic heat from the astronaut and the cooling of electrical components. The first (the Transport Water Loop) circulates in a semi-closed-loop manner and absorbs heat into a Liquid Coolant and Ventilation Garment (LCVG) worn by the astronaut. The second (the Feed-water Loop) provides water to a cooling device (Sublimator) with a porous plate, and that water subsequently sublimates to space vacuum. The cooling effect from the sublimation of this water translates to a cooling of the LCVG water that circulates through the Sublimator. Efforts are underway to streamline the use of a water processing kit (ALCLR) that is being used to periodically clean and disinfect the Transport Loop Water. Those efforts include a fine tuning of the duty cycle based on a review of prior performance data as well as an assessment of a fixed installation of this kit into the EMU backpack, within on-orbit EMU interface hardware or as a stand-alone unit. Furthermore, testing is being conducted to ensure compatibility between the International Space Station (ISS) Water Processor Assembly (WPA) effluent and the EMU Sublimator as a prelude to using the WPA effluent as influent to the EMU Feed Water loop. This work is undertaken to reduce the crewtime and logistics burdens for the EMU, while ensuring the long-term health of the EMU water circuits for a 6-year service life.

Efforts to Reduce International Space Station Crew Maintenance Time in the Management of the Extravehicular Mobility Unit Transport Loop Water Quality

NASA Technical Reports Server (NTRS)

Etter,David; Rector, Tony; Boyle, robert; Zande, Chris Vande

2012-01-01

The EMU (Extravehicular Mobility Unit) contains a semi-closed-loop re-circulating water circuit (Transport Loop) to absorb heat into a LCVG (Liquid Coolant and Ventilation Garment) worn by the astronaut. A second, single-pass water circuit (Feed-water Loop) provides water to a cooling device (Sublimator) containing porous plates, and that water sublimates through the porous plates to space vacuum. The cooling effect from the sublimation of this water translates to a cooling of the LCVG water that circulates through the Sublimator. The quality of the EMU Transport Loop water is maintained through the use of a water processing kit (ALCLR - Airlock Cooling Loop Remediation) that is used to periodically clean and disinfect the water circuit. Opportunities to reduce crew time associated with ALCLR operations include a detailed review of the historical water quality data for evidence to support an extension to the implementation cycle. Furthermore, an EMU returned after 2-years of use on the ISS (International Space Station) is being used as a test bed to evaluate the results of extended and repeated ALCLR implementation cycles. Finally, design, use and on-orbit location enhancements to the ALCLR kit components are being considered to allow the implementation cycle to occur in parallel with other EMU maintenance and check-out activities, and to extend the life of the ALCLR kit components. These efforts are undertaken to reduce the crew-time and logistics burdens for the EMU, while ensuring the long-term health of the EMU water circuits for a post- Shuttle 6-year service life.

Efforts to Reduce International Space Station Crew Maintenance for the Management of the Extravehicular Mobility Unit Transport Loop Water Quality

NASA Technical Reports Server (NTRS)

Steele, John W.; Etter, David; Rector, Tony; Boyle, Robert; Vandezande, Christopher

2013-01-01

The EMU (Extravehicular Mobility Unit) contains a semi-closed-loop re-circulating water circuit (Transport Loop) to absorb heat into a LCVG (Liquid Coolant and Ventilation Garment) worn by the astronaut. A second, single-pass water circuit (Feed-water Loop) provides water to a cooling device (Sublimator) containing porous plates, and that water sublimates through the porous plates to space vacuum. The cooling effect from the sublimation of this water translates to a cooling of the LCVG water that circulates through the Sublimator. The quality of the EMU Transport Loop water is maintained through the use of a water processing kit (ALCLR Airlock Cooling Loop Remediation) that is used to periodically clean and disinfect the water circuit. Opportunities to reduce crew time associated with on-orbit ALCLR operations include a detailed review of the historical water quality data for evidence to support an extension to the implementation cycle. Furthermore, an EMU returned after 2-years of use on the ISS (International Space Station) is being used as a test bed to evaluate the results of extended and repeated ALCLR implementation cycles. Finally, design, use and on-orbit location enhancements to the ALCLR kit components are being considered to allow the implementation cycle to occur in parallel with other EMU maintenance and check-out activities, and to extend the life of the ALCLR kit components. These efforts are undertaken to reduce the crew-time and logistics burdens for the EMU, while ensuring the long-term health of the EMU water circuits for a post-Shuttle 6-year service life.

Bio-Contamination Control for Spacesuit Garments - A Preliminary Study

NASA Technical Reports Server (NTRS)

Rhodes, Richard; Korona, Adam; Orndoff, Evelyn; Ott, Mark; Poritz, Darwin

2010-01-01

This paper outlines a preliminary study to review, test, and improve upon the current state of spacesuit bio-contamination control. The study includes an evaluation of current and advanced suit materials, ground and on-orbit cleaning methods, and microbial test and analysis methods. The first aspect of this study was to identify potential anti-microbial textiles and cleaning agents, and to review current microbial test methods. The anti-microbial cleaning agent and textile market survey included a review of current commercial-off-the-shelf (COTS) products that could potentially be used as future space flight hardware. This review included replacements for any of the softgood layers that may become contaminated during an extravehicular activity (EVA), including the pressure bladder, liquid cooling garment, and ancillary comfort undergarment. After a series of COTS anti-microbial textiles and clean ing agents were identified, a series of four tests were conducted: (1) a stacked configuration test that was conducted in order to review how bio-contamination would propagate through the various suit layers, (2) a individual materials test that evaluated how well each softgood layer either promoted or repressed growth, (3) a cleaning agent test that evaluated the efficacy on each of the baseline bladders, and (4) an evaluation of various COTS anti-microbial textiles. All antimicrobial COTS materials tested appeared to control bacteria colony forming unit (CFU) growth better than the Thermal Comfort Undergarment (TCU) and ACES Liquid Cooling Garment (LCG)/EMU Liquid Cooling Ventilation Garment (LCVG) materials currently in use. However, a comparison of fungi CFU growth in COTS to current suit materials appeared to vary per material. All cleaning agents tested in this study appeared to inhibit the level of bacteria and fungi growth to acceptable levels for short duration tests. While several trends can be obtained from the current analysis, a series of test improvements are described for future microbial testing.

Protective garment ventilation system

NASA Technical Reports Server (NTRS)

Lang, R. (Inventor)

1970-01-01

A method and apparatus for ventilating a protective garment, space suit system, and/or pressure suits to maintain a comfortable and nontoxic atmosphere within is described. The direction of flow of a ventilating and purging gas in portions of the garment may be reversed in order to compensate for changes in environment and activity of the wearer. The entire flow of the ventilating gas can also be directed first to the helmet associated with the garment.

External Cooling Coupled to Reduced Extremity Pressure Device

NASA Technical Reports Server (NTRS)

Kuznetz, Lawrence H.

2011-01-01

Although suited astronauts are currently cooled with a Liquid Cooled Ventilation Garment (LCVG), which can remove up to 85 percent of body heat, their effectiveness is limited because cooling must penetrate layers of skin, muscle, fat, bone, and tissue to reach the bloodstream, where its effect is prominent. Vasoconstriction further reduces the effectiveness by limiting arterial flow when exposed to cold (the frostbite response), resulting in a time constant on the order of 20 minutes from application to maximum effect. This delay can be crucial in severe exposure to hypo- or hyper-thermic conditions, compromising homeostasis. The purpose of this innovation is to provide a lightweight, effective means of delivering heat or cold from an external source directly to the bloodstream. The effectiveness of this ECCREP (External Cooling Coupled to Reduced Extremity Pressure) device is based on not having to penetrate layers of skin, muscle, fat, and tissue, thereby avoiding the thermal lag associated with their mass and heat capacity. This is accomplished by means of an outer boot operating at a slightly reduced pressure than the rest of the body, combined with an inner boot cooled or heated by an external source via water or chemicals. Heat transfer from the external source to the foot takes place by means of circulating water or flexible heat pipes.

[Heat transfer analysis of liquid cooling garment used for extravehicular activity].

PubMed

Qiu, Y F; Yuan, X G; Mei, Z G; Jia, S G; Ouyang, H; Ren, Z S

2001-10-01

Brief description was given about the construction and function of the LCG (liquid cooling garment) used for EVA (extravehicular activity). The heat convection was analyzed between ventilating gas and LCG, the heat and mass transfer process was analyzed too, then a heat and mass transfer mathematical model of LCG was developed. Thermal physiological experimental study with human body wearing LVCG (liquid cooling and ventilation garment) used for EVA was carried out to verify this mathematical model. This study provided a basis for the design of liquid-cooling and ventilation system for the space suit.

Design and Evaluation of a Ventilated Garment for Use in Temperatures up to 200°C

PubMed Central

Crockford, G. W.; Hellon, R. F.

1964-01-01

The protection of personnel against high air and radiant temperatures is a problem that has been confronting industry for many years now, and for many industrial situations it still has not been solved. The experiments reported here were intended to determine the most suitable form of insulation for a hot entry suit for use primarily in furnace wrecking where mean radiant temperatures of 200°C. are met and where heat-reflecting garments are unsuitable due to the rapid deterioration of the reflecting surface. From a preliminary consideration of the problem it was concluded that a ventilated garment was required and that conventional ventilated garments in which air is induced to flow parallel to the body surfaces (axial ventilation) are basically unsound in design as the air is not utilized for the transfer of heat in the most efficient manner. A new form of ventilation was therefore developed in which air flows out through a permeable suit (radial ventilation). This form of ventilation produces what is called dynamic insulation, and this method of insulation, when compared with two alternative methods on a physical model, was found to be very effective. The model experiments were confirmed by comparative trials of three ventilated suits each using one of three different forms of insulation thought to be suitable for use in heat-protective clothing. Physiological measurements made on the subjects and physical measurement made on the suits confirmed that dynamic insulation is the most suitable insulation for a hot entry suit for furnace wrecking. With the air flows used in these experiments, dynamic insulation had a thermal conductance one-fifth that of conventional static insulation, and sweat losses and oral temperature rises were reduced by one-third and one-half respectively. PMID:14180476

Metal hydride heat pump engineering demonstration and evaluation model

NASA Technical Reports Server (NTRS)

Lynch, Franklin E.

1993-01-01

Future generations of portable life support systems (PLSS's) for space suites (extravehicular mobility units or EMU's) may require regenerable nonventing thermal sinks (RNTS's). For purposes of mobility, a PLSS must be as light and compact as possible. Previous venting PLSS's have employed water sublimators to reject metabolic and equipment heat from EMU's. It is desirable for long-duration future space missions to minimize the use of water and other consumables that need to be periodically resupplied. The emission of water vapor also interferes with some types of instrumentation that might be used in future space exploration. The test article is a type of RNTS based on a metal hydride heat pump (MHHP). The task of reservicing EMU's after use must be made less demanding in terms of time, procedures, and equipment. The capability for quick turnaround post-EVA servicing (30 minutes) is a challenging requirement for many of the RNTS options. The MHHP is a very simple option that can be regenerated in the airlock within the 30 minute limit by the application of a heating source and a cooling sink. In addition, advanced PLSS's must provide a greater degree of automatic control, relieving astronauts of the need to manually adjust temperatures in their liquid cooled ventilation garments (LCVG's). The MHHP includes automatic coolant controls with the ability to follow thermal load swings from minimum to maximum in seconds. The MHHP includes a coolant loop subsystem with pump and controls, regeneration equipment for post-EVA servicing, and a PC-based data acquisition and control system (DACS).

Flexible Fabrics with High Thermal Conductivity for Advanced Spacesuits

NASA Technical Reports Server (NTRS)

Trevino, Luis A.; Bue, Grant; Orndoff, Evelyne; Kesterson, Matt; Connel, John W.; Smith, Joseph G., Jr.; Southward, Robin E.; Working, Dennis; Watson, Kent A.; Delozier, Donovan M.

2006-01-01

This paper describes the effort and accomplishments for developing flexible fabrics with high thermal conductivity (FFHTC) for spacesuits to improve thermal performance, lower weight and reduce complexity. Commercial and additional space exploration applications that require substantial performance enhancements in removal and transport of heat away from equipment as well as from the human body can benefit from this technology. Improvements in thermal conductivity were achieved through the use of modified polymers containing thermally conductive additives. The objective of the FFHTC effort is to significantly improve the thermal conductivity of the liquid cooled ventilation garment by improving the thermal conductivity of the subcomponents (i.e., fabric and plastic tubes). This paper presents the initial system modeling studies, including a detailed liquid cooling garment model incorporated into the Wissler human thermal regulatory model, to quantify the necessary improvements in thermal conductivity and garment geometries needed to affect system performance. In addition, preliminary results of thermal conductivity improvements of the polymer components of the liquid cooled ventilation garment are presented. By improving thermal garment performance, major technology drivers will be addressed for lightweight, high thermal conductivity, flexible materials for spacesuits that are strategic technical challenges of the Exploration

Artemyev post-EVA

NASA Image and Video Library

2014-06-19

Cosmonaut Oleg Artemyev, Expedition 40 flight engineer, is photographed still wearing his liquid cooling and ventilation garment after a Russian Extravehicular Activity (EVA). Artemyev is standing in his crew quarters (CQ).

Design and Development of a High Altitude Protective Assembly.

DTIC Science & Technology

CWU-3/P ANTIGRAVITY SUITS, CWU-12/P ANTIEXPOSURE SUITS, HAPA(HIGH ALTITUDE PROTECTIVE ASSEMBLIES), *HIGH ALTITUDE PROTECTIVE ASSEMBLIES, LPU-3/P LIFE PRESERVERS, MA-3 VENTILATION GARMENTS, PARACHUTE HARNESSES, PARTIAL PRESSURE SUITS.

Reducing heat stress under thermal insulation in protective clothing: microclimate cooling by a 'physiological' method.

PubMed

Glitz, K J; Seibel, U; Rohde, U; Gorges, W; Witzki, A; Piekarski, C; Leyk, D

2015-01-01

Heat stress caused by protective clothing limits work time. Performance improvement of a microclimate cooling method that enhances evaporative and to a minor extent convective heat loss was tested. Ten male volunteers in protective overalls completed a work-rest schedule (130 min; treadmill: 3 × 30 min, 3 km/h, 5% incline) with or without an additional air-diffusing garment (climatic chamber: 25°C, 50% RH, 0.2 m/s wind). Heat loss was supported by ventilating the garment with dry air (600 l/min, ≪5% RH, 25°C). Ventilation leads (M ± SD, n = 10, ventilated vs. non-ventilated) to substantial strain reduction (max. HR: 123 ± 12 b/min vs. 149 ± 24 b/min) by thermal relief (max. core temperature: 37.8 ± 0.3°C vs. 38.4 ± 0.4°C, max. mean skin temperature: 34.7 ± 0.8°C vs. 37.1 ± 0.3°C) and offers essential extensions in performance and work time under thermal insulation. Heat stress caused by protective clothing limits work time. Performance can be improved by a microclimate cooling method that supports evaporative and to a minor extent convective heat loss. Sweat evaporation is the most effective thermoregulatory mechanism for heat dissipation and can be enhanced by insufflating dry air into clothing.

Space Suit Portable Life Support System Rapid Cycle Amine Repackaging and Sub-Scale Test Results

NASA Technical Reports Server (NTRS)

Paul, Heather L.; Rivera, Fatonia L.

2010-01-01

NASA is developing technologies to meet requirements for an extravehicular activity (EVA) Portable Life Support System (PLSS) for exploration. The PLSS Ventilation Subsystem transports clean, conditioned oxygen to the pressure garment for space suit pressurization and human consumption, and recycles the ventilation gas, removing carbon dioxide, humidity, and trace contaminants. This paper provides an overview of the development efforts conducted at the NASA Johnson Space Center to redesign the Rapid Cycle Amine (RCA) canister and valve assembly into a radial flow, cylindrical package for carbon dioxide and humidity control of the PLSS ventilation loop. Future work is also discussed.

High-Thermal-Conductivity Fabrics

NASA Technical Reports Server (NTRS)

Chibante, L. P. Felipe

2012-01-01

Heat management with common textiles such as nylon and spandex is hindered by the poor thermal conductivity from the skin surface to cooling surfaces. This innovation showed marked improvement in thermal conductivity of the individual fibers and tubing, as well as components assembled from them. The problem is centered on improving the heat removal of the liquid-cooled ventilation garments (LCVGs) used by astronauts. The current design uses an extensive network of water-cooling tubes that introduces bulkiness and discomfort, and increases fatigue. Range of motion and ease of movement are affected as well. The current technology is the same as developed during the Apollo program of the 1960s. Tubing material is hand-threaded through a spandex/nylon mesh layer, in a series of loops throughout the torso and limbs such that there is close, form-fitting contact with the user. Usually, there is a nylon liner layer to improve comfort. Circulating water is chilled by an external heat exchanger (sublimator). The purpose of this innovation is to produce new LCVG components with improved thermal conductivity. This was addressed using nanocomposite engineering incorporating high-thermalconductivity nanoscale fillers in the fabric and tubing components. Specifically, carbon nanotubes were added using normal processing methods such as thermoplastic melt mixing (compounding twin screw extruder) and downstream processing (fiber spinning, tubing extrusion). Fibers were produced as yarns and woven into fabric cloths. The application of isotropic nanofillers can be modeled using a modified Nielsen Model for conductive fillers in a matrix based on Einstein s viscosity model. This is a drop-in technology with no additional equipment needed. The loading is limited by the ability to maintain adequate dispersion. Undispersed materials will plug filtering screens in processing equipment. Generally, the viscosity increases were acceptable, and allowed the filled polymers to still be processed.The novel feature is that fabrics do not inherently possess good thermal conductivity. In fact, fabrics are used for thermal insulation, not heat removal. The technology represents the first material that is a wearable fabric, based on company textiles and materials that will significantly conduct heat.

Spacesuit Water Membrane Evaporator; An Enhanced Evaporative Cooling Systems for the Advanced Extravehicular Mobility Unit Portable Life Support System

NASA Technical Reports Server (NTRS)

Bue, Grant C.; Makinen, Janice V.; Miller, Sean.; Campbell, Colin; Lynch, Bill; Vogel, Matt; Craft, Jesse; Petty, Brian

2014-01-01

Spacesuit Water Membrane Evaporator - Baseline heat rejection technology for the Portable Life Support System of the Advanced EMU center dot Replaces sublimator in the current EMU center dot Contamination insensitive center dot Can work with Lithium Chloride Absorber Radiator in Spacesuit Evaporator Absorber Radiator (SEAR) to reject heat and reuse evaporated water The Spacesuit Water Membrane Evaporator (SWME) is being developed to replace the sublimator for future generation spacesuits. Water in LCVG absorbs body heat while circulating center dot Warm water pumped through SWME center dot SWME evaporates water vapor, while maintaining liquid water - Cools water center dot Cooled water is then recirculated through LCVG. center dot LCVG water lost due to evaporation (cooling) is replaced from feedwater The Independent TCV Manifold reduces design complexity and manufacturing difficulty of the SWME End Cap. center dot The offset motor for the new BPV reduces the volume profile of the SWME by laying the motor flat on the End Cap alongside the TCV.

Evaluation of a liquid cooling garment as a component of the Launch and Entry Suit (LES)

NASA Technical Reports Server (NTRS)

Waligora, J.; Charles, J.; Fritsch, I.; Fortney, S.; Siconolfi, S.; Pepper, L.; Bagian, L.; Kumar, V.

1994-01-01

The LES is a partial pressure suit and a component of the shuttle life support system used during launch and reentry. The LES relies on gas ventilation with cabin air to provide cooling. There are conditions during nominal launch and reentry, landing, and post-landing phases when cabin temperature is elevated. Under these conditions, gas cooling may result in some discomfort and some decrement in orthostatic tolerance. There are emergency conditions involving loss of cabin ECS capability that would challenge crew thermal tolerance. The results of a series of tests are presented. These tests were conducted to assess the effectiveness of a liquid-cooled garment in alleviating thermal discomfort, orthostatic intolerance, and thermal intolerance during simulated mission phases.

Ventilation Loss in the NASA Space Shuttle Crew Protective Garments: Potential for Heat Stress

NASA Technical Reports Server (NTRS)

Askew, Gregory K.; Kaufman, Jonathan W.

1991-01-01

The potential of the National Aeronautics and Space Administration (NASA) S1035 Launch/Entry suit (LES) for producing heat stress in a simulated Space Shuttle cabin environment has been studied. The testing was designed to determine if the NASA S1035 poses a greater threat of inducing heat stress than the NASA S1032. Conditions were designed to simulate an extreme prelaunch situation, with chamber temperatures maintained at dry bulb temperature 27.2 +/- 0.1 C, globe temperature - 27.3 +/- 0.1 C, and wet bulb temperature 21.1 +/- 0.3 C. Four males, aged 28-48, were employed in this study, with three subjects having exposures in all four conditions and the fourth subject exposed to 3 conditions. Test durations in the ventilated (V) and unventilated (UV) conditions were designed for 480 minutes, which all subjects achieved. No significant differences related to experimental conditions were noted in rectal temperatures, heart rates or sweat rates. The results indicate that the S1032 and S1035 garments, in either the V or UV state, poses no danger of inducing unacceptable heat stress under the conditions expected within the Shuttle cabin during launch or re-entry.

Control of thermal balance by a liquid circulating garment based on a mathematical representation of the human thermoregulatory system. Ph.D. Thesis - California Univ., Berkeley

NASA Technical Reports Server (NTRS)

Kuznetz, L. H.

1976-01-01

Test data and a mathematical model of the human thermoregulatory system were used to investigate control of thermal balance by means of a liquid circulating garment (LCG). The test data were derived from five series of experiments in which environmental and metabolic conditions were varied parametrically as a function of several independent variables, including LCG flowrate, LCG inlet temperature, net environmental heat exchange, surrounding gas ventilation rate, ambient pressure, metabolic rate, and subjective/obligatory cooling control. The resultant data were used to relate skin temperature to LCG water temperature and flowrate, to assess a thermal comfort band, to demonstrate the relationship between metabolic rate and LCG heat dissipation, and so forth. The usefulness of the mathematical model as a tool for data interpretation and for generation of trends and relationships among the various physiological parameters was also investigated and verified.

Requirements and Sizing Investigation for Constellation Space Suit Portable Life Support System Trace Contaminant Control

NASA Technical Reports Server (NTRS)

Paul, Heather L.; Jennings, Mallory A.; Waguespack, Glenn

2010-01-01

The Trace Contaminant Control System (TCCS), located within the ventilation loop of the Constellation Space Suit Portable Life Support System (PLSS), is responsible for removing hazardous trace contaminants from the space suit ventilation flow. This paper summarizes the results of a trade study that evaluated if trace contaminant control could be accomplished without a TCCS, relying on suit leakage, ullage loss from the carbon dioxide and humidity control system, and other factors. Trace contaminant generation rates were revisited to verify that values reflect the latest designs for Constellation Space Suit System (CSSS) pressure garment materials and PLSS hardware. Additionally, TCCS sizing calculations were performed and a literature survey was conducted to review the latest developments in trace contaminant technologies.

Modified ACES Portable Life Support Integration, Design, and Testing for Exploration Missions

NASA Technical Reports Server (NTRS)

Kelly, Cody

2014-01-01

NASA's next generation of exploration missions provide a unique challenge to designers of EVA life support equipment, especially in a fiscally-constrained environment. In order to take the next steps of manned space exploration, NASA is currently evaluating the use of the Modified ACES (MACES) suit in conjunction with the Advanced Portable Life Support System (PLSS) currently under development. This paper will detail the analysis and integration of the PLSS thermal and ventilation subsystems into the MACES pressure garment, design of prototype hardware, and hardware-in-the-loop testing during the spring 2014 timeframe. Prototype hardware was designed with a minimal impact philosophy in order to mitigate design constraints becoming levied on either the advanced PLSS or MACES subsystems. Among challenges faced by engineers were incorporation of life support thermal water systems into the pressure garment cavity, operational concept definition between vehicle/portable life support system hardware, and structural attachment mechanisms while still enabling maximum EVA efficiency from a crew member's perspective. Analysis was completed in late summer 2013 to 'bound' hardware development, with iterative analysis cycles throughout the hardware development process. The design effort will cumulate in the first ever manned integration of NASA's advanced PLSS system with a pressure garment originally intended primarily for use in a contingency survival scenario.

Results of the Trace Contaminant Control Needs Evaluation and Sizing Study for Space Suit Life Support Development

NASA Technical Reports Server (NTRS)

Paul, Heather L.; Jennings, Mallory A.

2009-01-01

The Trace Contaminant Control System (TCCS), located within the ventilation loop of the Portable Life Support System (PLSS) of the Constellation Space Suit Element (CSSE), is responsible for removing hazardous trace contaminants from the space suit ventilation flow. This paper summarizes the results of a trade study that evaluated if trace contaminant control could be accomplished without a TCCS, relying on suit leakage, ullage loss from the carbon dioxide and humidity control system, and other factors. Trace contaminant generation rates were revisited to verify that values reflect the latest designs for CSSE pressure garment materials and PLSS hardware. Additionally, TCCS sizing calculations were performed and a literature survey was conducted to review the latest developments in trace contaminant technologies.

Utilizing a Suited Manikin Test Apparatus and Spacesuit Ventilation Loop to Evaluate Carbon Dioxide Washout

NASA Technical Reports Server (NTRS)

Chullen, Cinda; Conger, Bruce; Korona, Adam; Kanne, Bryan; McMillin, Summer; Norcross, Jason; Jeng, Frank; Swickrath, Mike

2014-01-01

NASA is pursuing technology development of an Advanced Extravehicular Mobility Unit (AEMU) which is an integrated assembly made up of primarily a pressure garment system and a Portable Life Support System (PLSS). The PLSS is further composed of an oxygen subsystem, a ventilation subsystem, and a thermal subsystem. One of the key functions of the ventilation system is to remove and control the carbon dioxide delivered to the crewmember. Carbon dioxide washout is the mechanism by which CO2 levels are controlled within the spacesuit helmet to limit the concentration of CO2 inhaled by the crew member. CO2 washout performance is a critical parameter needed to ensure proper and robust designs that are insensitive to human variabilities in a spacesuit. A Suited Manikin Test Apparatus (SMTA) is being developed to augment testing of the PLSS ventilation loop in order to provide a lower cost and more controlled alternative to human testing. The CO2 removal function is performed by the regenerative Rapid Cycle Amine (RCA) within the PLSS ventilation loop and its performance is evaluated within the integrated SMTA and Ventilation Loop test system. This paper will provide a detailed description of the schematics, test configurations, and hardware components of this integrated system. Results and analysis of testing performed with this integrated system will be presented within this paper.

Utilizing a Suited Manikin Test Apparatus and Space Suit Ventilation Loop to Evaluate Carbon Dioxide Washout

NASA Technical Reports Server (NTRS)

Chullen, Cinda; Conger, Bruce; Korona, Adam; Kanne, Bryan; McMillin, Summer; Paul, Thomas; Norcross, Jason; Alonso, Jesus Delgado; Swickrath, Mike

2015-01-01

NASA is pursuing technology development of an Advanced Extravehicular Mobility Unit (AEMU) which is an integrated assembly made up of primarily a pressure garment system and a portable life support subsystem (PLSS). The PLSS is further composed of an oxygen subsystem, a ventilation subsystem, and a thermal subsystem. One of the key functions of the ventilation system is to remove and control the carbon dioxide (CO2) delivered to the crewmember. Carbon dioxide washout is the mechanism by which CO2 levels are controlled within the space suit helmet to limit the concentration of CO2 inhaled by the crew member. CO2 washout performance is a critical parameter needed to ensure proper and robust designs that are insensitive to human variabilities in a space suit. A suited manikin test apparatus (SMTA) was developed to augment testing of the PLSS ventilation loop in order to provide a lower cost and more controlled alternative to human testing. The CO2 removal function is performed by the regenerative Rapid Cycle Amine (RCA) within the PLSS ventilation loop and its performance is evaluated within the integrated SMTA and Ventilation Loop test system. This paper will provide a detailed description of the schematics, test configurations, and hardware components of this integrated system. Results and analysis of testing performed with this integrated system will be presented within this paper.

Thermal Performance Testing of EMU and OSS Liquid Cooling Garments

NASA Technical Reports Server (NTRS)

Rhodes, Richard; Bue, Grant; Hakam, Mary

2012-01-01

A test was conducted to evaluate three factors influencing the thermal performance of liquid cooling garments (LCG): (1) the comparable thermal performance of an Oceaneering developed engineering evaluation unit (EEU) prototype LDG, (2) the effect of the thermal comfort undergarment (TCU), and (3) the performance of a torso or upper body only LCG configuration. To evaluate the thermal performance of each configuration a metabolic test was conducted, utilizing suited subjects to generate the metabolic heat. For this study three (3) test subjects of similar health and weight produced a metabolic load on the LDG configuration by either resting (300-600 BTU/hr), walking at a slow pace (1200 BRU/hr), and walking at a brisk pace (2200 BTU/hr), as outlined in Figure 1, the metabolic profile. During the test, oxygen consumption, heart rate, relative humidity, air flow, inlet and outlet air pressure, inlet and outlet air temperature, delta air temperature, water flow (100 lb/hr), inlet water temperature (64 F), delta water temperature, water pressure, core body temperature, skin temperature, and sweat loss data was recorded. Four different test configurations were tested, with one configuration tested twice, as outlined in Table 1. The test was conducted with the suit subjects wearing the Demonstrator Suit, pressurized to vent pressure (approximately 0.5 psig). The demonstrator suit has an integrated ventilation duct system and was used to create a relevant environment with a captured ventilation return, an integrated vent tree, and thermal insulation from the environment.

Effects of liquid cooling garments on recovery and performance time in individuals performing strenuous work wearing a firefighter ensemble.

PubMed

Kim, Jung-Hyun; Coca, Aitor; Williams, W Jon; Roberge, Raymond J

2011-07-01

This study investigated the effects of body cooling using liquid cooling garments (LCG) on performance time (PT) and recovery in individuals wearing a fully equipped prototype firefighter ensemble (PFE) incorporating a self-contained breathing apparatus (SCBA). Six healthy male participants (three firefighters and three non-firefighters) completed six experimental sessions in an environmental chamber (35°C, 50% relative humidity), consisting of three stages of 15 min exercise at 75% VO2max, and 10 min rest following each exercise stage. During each session, one of the following six conditions was administered in a randomized order: control (no cooling, CON); air ventilation of exhaust SCBA gases rerouted into the PFE (AV); top cooling garment (TCG); TCG combined with AV (TCG+AV); a shortened whole body cooling garment (SCG), and SCG combined with AV (SCG+AV). Results showed that total PT completed was longer under SCG and SCG+AV compared with CON, AV, TCG, and TCG+AV (p<0.01). Magnitude of core temperature (Tc) elevation was significantly decreased when SCG was utilized (p<0.01), and heart rate recovery rate (10 min) was enhanced under SCG, SCG+AV, TCG, and TCG+AV compared with CON (p<0.05). Estimated Esw rate (kg·h(-1)) was the greatest in CON, 1.62 (0.37), and the least in SCG+AV 0.98 (0.44): (descending order: CON>AV>TCG=TCG+AV>SCG>SCG+AV) without a statistical difference between the conditions (p<0.05). Results of the present study suggest that the application of LCG underneath the PFE significantly improves the recovery during a short period of rest and prolongs performance time in subsequent bouts of exercise. LCG also appears to be an effective method for body cooling that promotes heat dissipation during uncompensable heat stress.

Determination of Time Required for Materials Exposed to Oxygen to Return to Reduced Flammability

NASA Technical Reports Server (NTRS)

Harper, Susana; Hirsch, David; Smith, Sarah

2009-01-01

Increased material flammability due to exposure to high oxygen concentrations is a concern from both a safety and operational perspective. Localized, high oxygen concentrations can occur when exiting a higher oxygen concentration environment due to material saturation, as well as oxygen entrapment between barrier materials. Understanding of oxygen diffusion and permeation and its correlation to flammability risks can reduce the likelihood of fires while improving procedures as NASA moves to longer missions with increased extravehicular activities in both spacecraft and off-Earth habitats. This paper examines the time required for common spacecraft materials exposed to oxygen to return to reduced flammability after removal from the increased oxygen concentration environment. Specifically, NASA-STD-6001A maximum oxygen concentration testing and ASTM F-1927 permeability testing were performed on Nomex 4 HT90-40, Tiburon 5 Surgical Drape, Cotton, Extravehicular Mobility Unit (EMU) Liquid-Cooled Ventilation Garment, EMU Thermal Comfort Undergarment, EMU Mosite Foam with Spandex Covering, Advanced Crew Escape Suit (ACES) Outer Cross-section, ACES Liquid Cooled Garment (LCG), ACES O2 Hose Material, Minicel 6 Polyethylene Foam, Minicel Polyethylene Foam with Nomex Covering, Pyrell Polyurethane Foam, and Zotek 7 F-30 Foam.

Personal cooling in hot workings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tuck, M.A.

1999-07-01

The number of mines experiencing climatic difficulties worldwide is increasing. In a large number of cases these climatic difficulties are confined to working areas only or to specific locations within working areas. Thus the problem in these mines can be described as highly localized, due to a large extent not to high rock temperatures but due to machine heat loads and low airflow rates. Under such situations conventional means of controlling the climate can be inapplicable and/or uneconomic. One possible means of achieving the required level of climatic control, to ensure worker health and safety whilst achieving economic gains, ismore » to adopt a system of active man cooling. This is the reverse of normal control techniques where the cooling power of the ventilating air is enhanced in some way. Current methods of active man cooling include ice jackets and various umbilical cord type systems. These have numerous drawbacks, such as limited useful exposure times and limitations to worker mobility. The paper suggests an alternative method of active man cooling than those currently available and reviews the design criteria for such a garment. The range of application of such a garment is discussed, under both normal and emergency situations.« less

Thermal Performance Testing of EMU and CSAFE Liquid Cooling Garments

NASA Technical Reports Server (NTRS)

Rhodes, Richard; Bue, Grant; Hakam, Mark; Radford, Tamara

2013-01-01

Future exploration missions require the development of a new liquid cooling garment (LCG) that offers greater system reliability, is more comfortable, and maximizes thermal performance. To inform the development of a future LCG a thermal performance test was conducted to evaluate three factors: (1) the effect of the thermal comfort undergarment (TCU) on tactile and thermal comfort, (2) the comparable thermal performance of an CSAFE developed engineering evaluation unit (EEU) LCG, which uses a commercial-off-the-shelf (COTS) wicking garment as the base, and (3) the performance of a torso or upper body only LCG configuration to evaluate a proposed auxiliary loop configuration. To evaluate the thermal performance of each configuration a metabolic suit test was conducted, utilizing suited subjects to generate metabolic heat by walking on a treadmill at various speeds. Three (3) test subjects of similar height and weight produced a metabolic load for five tests by either resting (300-600 BTU/hr), walking at a slow pace (1200 BTU/hr), and walking at a brisk pace (2200 BTU/hr). During the test, data was collected that would allow us to track the heat transfer to the LCG and ventilation system to determine the thermal performance of the LCG configurations. Four different test configurations were tested, with one configuration tested twice. The test results show that the CSAFE EEU LCG and EMU LCG had comparable performance. The testing also showed that an auxiliary loop LCG, sized similarly to the shirt-only configuration, should provide adequate cooling for contingency scenarios. Finally, the testing showed the previous analysis that assumed a UA deterioration from the TCU was too conservative and the TCU may prove to be acceptable for future development with additional analysis and testing.

Ventilation loss and pressurization in the NASA launch/entry suit: Potential for heat stress

NASA Technical Reports Server (NTRS)

Kaufman, Jonathan W.; Dejneka, Katherine Y.; Askew, Gregory K.

1989-01-01

The potential of the NASA Launch/Entry Suit (LES) for producing heat stress in a simulated Space Shuttle cabin environment was studied. The testing was designed to identify potential heat stress hazards if the LES were pressurized or if ventilation were lost. Conditions were designed to simulate an extreme pre-launch situation with chamber temperatures maintained at dry bulb temperature = 27.2 +/- 0.1 C, globe temperature = 27.3 +/- 0.1 C, and wet bulb temperature = 21.1 +/- 0.3 C. Two females and two males, 23 to 34 years of age, were employed in this study, with two subjects having exposures in all 3 conditions. Test durations in the ventilated (V) and unventilated (UV) conditions were designed for 480 minutes, which all subjects achieved. Pressurized runs (Pr) were designed for 45 minutes, which all subjects also achieved. While some significant differences related to experimental conditions were noted in rectal and mean skin temperatures, evaporation rates, sweat rates, and heart rate, these differences were not thought to be physiologically significant. The results indicate that the LES garment, in either the Pr or UV state, poses no danger of inducing unacceptable heat stress under the conditions expected within the Space Shuttle cabin during launch or reentry.

The effects of a moisture-wicking fabric shirt on the physiological and perceptual responses during acute exercise in the heat.

PubMed

De Sousa, Justin; Cheatham, Christopher; Wittbrodt, Matthew

2014-11-01

This study investigated the effects that a form fitted, moisture-wicking fabric shirt, promoted to have improved evaporative and ventilation properties, has on the physiological and perceptual responses during exercise in the heat. Ten healthy male participants completed two heat stress tests consisting of 45 min of exercise (50% VO2peak) in a hot environment (33 °C, 60% RH). One heat stress test was conducted with the participant wearing a 100% cotton short sleeved t-shirt and the other heat stress test was conducted with the participant wearing a short sleeved synthetic shirt (81% polyester and 19% elastane). Rectal temperature was significantly lower (P < 0.05) in the synthetic condition during the last 15 min of exercise. Furthermore, the synthetic polyester shirt retained less sweat (P < 0.05). As exercise duration increases, the ventilation and evaporation properties of the synthetic garment may prove beneficial in the preservation of body temperature during exercise in the heat. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

V-SUIT Model Validation Using PLSS 1.0 Test Results

NASA Technical Reports Server (NTRS)

Olthoff, Claas

2015-01-01

The dynamic portable life support system (PLSS) simulation software Virtual Space Suit (V-SUIT) has been under development at the Technische Universitat Munchen since 2011 as a spin-off from the Virtual Habitat (V-HAB) project. The MATLAB(trademark)-based V-SUIT simulates space suit portable life support systems and their interaction with a detailed and also dynamic human model, as well as the dynamic external environment of a space suit moving on a planetary surface. To demonstrate the feasibility of a large, system level simulation like V-SUIT, a model of NASA's PLSS 1.0 prototype was created. This prototype was run through an extensive series of tests in 2011. Since the test setup was heavily instrumented, it produced a wealth of data making it ideal for model validation. The implemented model includes all components of the PLSS in both the ventilation and thermal loops. The major components are modeled in greater detail, while smaller and ancillary components are low fidelity black box models. The major components include the Rapid Cycle Amine (RCA) CO2 removal system, the Primary and Secondary Oxygen Assembly (POS/SOA), the Pressure Garment System Volume Simulator (PGSVS), the Human Metabolic Simulator (HMS), the heat exchanger between the ventilation and thermal loops, the Space Suit Water Membrane Evaporator (SWME) and finally the Liquid Cooling Garment Simulator (LCGS). Using the created model, dynamic simulations were performed using same test points also used during PLSS 1.0 testing. The results of the simulation were then compared to the test data with special focus on absolute values during the steady state phases and dynamic behavior during the transition between test points. Quantified simulation results are presented that demonstrate which areas of the V-SUIT model are in need of further refinement and those that are sufficiently close to the test results. Finally, lessons learned from the modelling and validation process are given in combination with implications for the future development of other PLSS models in V-SUIT.

The impact of design variables and aftercare regime on the long-term performance of pressure garments.

PubMed

Macintyre, Lisa; Gilmartin, Sian; Rae, Michelle

2007-01-01

We sought to establish the impact of pressure garment design variables, moisturizer use, and laundry method on the ability of pressure garments to maintain their pressure delivering potential, indicated here by garment tension, over time and use. Twenty-six sets of three replicate pressure garment sleeves were constructed from four powernet fabrics, using three reduction factors and six sleeve dimensions. These pressure garment sleeves were extended for 23 hours on static cylinder models followed by hand or machine laundry up to 28 times. Some sleeves were additionally exposed to moisturizers during their extension. Garment tension and dimensions were measured before and during the simulated wear and wash period to indicate each garment's ability to maintain its tension and therefore pressure throughout a period of "use." The results of the investigation were analyzed in groups where each group contained only 1 variable, thereby allowing the variables with the most significant impact on tension degradation to be identified. The investigation confirmed that all pressure garments lost tension and therefore pressure delivering ability over time and use. It further revealed that pressure garments designed to exert greater pressures degraded faster than those designed to exert lower pressures. Contact between pressure garments and moisturizers accelerated tension degradation, and machine-washing pressure garments tended to prolong their pressure-delivering properties compared with hand-washing them. To maintain the initial pressure delivered by pressure garments, powernet fabrics should be prestressed before being designed/constructed and they should be machine-washed by patients.

Suraev and Kotov wearing LCVG in the Pirs DC-1 during Expedition 22

NASA Image and Video Library

2010-01-12

ISS022-E-023778 (12 Jan. 2010) --- Attired in blue thermal undergarments that complement the Russian Orlan spacesuit, Russian cosmonauts Maxim Suraev (left) and Oleg Kotov, both Expedition 22 flight engineers, prepare to don and check out their Orlan spacesuits in preparation for a spacewalk scheduled for Jan. 14 to outfit the new Poisk module for future Russian vehicle dockings.

Suraev and Kotov wearing LCVG in the Pirs DC-1 during Expedition 22

NASA Image and Video Library

2010-01-12

ISS022-E-023767 (12 Jan. 2010) --- Attired in blue thermal undergarments that complement the Russian Orlan spacesuit, Russian cosmonauts Maxim Suraev (foreground) and Oleg Kotov, both Expedition 22 flight engineers, prepare to don and check out their Orlan spacesuits in preparation for a spacewalk scheduled for Jan. 14 to outfit the new Poisk module for future Russian vehicle dockings.

Suraev and Kotov wearing LCVG in the Pirs DC-1 during Expedition 22

NASA Image and Video Library

2010-01-12

ISS022-E-023766 (12 Jan. 2010) --- Attired in blue thermal undergarments that complement the Russian Orlan spacesuit, Russian cosmonauts Maxim Suraev (foreground) and Oleg Kotov, both Expedition 22 flight engineers, prepare to don and check out their Orlan spacesuits in preparation for a spacewalk scheduled for Jan. 14 to outfit the new Poisk module for future Russian vehicle dockings.

Ghanaian Women's Perceptions of the Quality of Ready-to-Wear Garments

ERIC Educational Resources Information Center

Fianu, Docea A. G.; Aryee-Atta, Salome N. A.

2008-01-01

Women can choose among many options with regard to ready-to-wear (RTW) clothing; for example, they can purchase imported or domestically produced garments, or they can select custom-made or second-hand garments. In Ghana, women have traditionally preferred imported RTW garments to RTW garments produced within the country. In this study,…

Proposed Schematics for an Advanced Development Lunar Portable Life Support System

NASA Technical Reports Server (NTRS)

Conger, Bruce; Chullen, Cinda; Barnes, Bruce; Leavitt, Greg

2010-01-01

The latest development of the NASA space suit is an integrated assembly made up of primarily a Pressure Garment System (PGS) and a Portable Life Support System (PLSS). The PLSS is further composed of an oxygen (O2) subsystem, a ventilation subsystem, and a thermal subsystem. This paper baselines a detailed schematic of the PLSS to provide a basis for current and future PLSS development efforts. Both context diagrams and detailed schematics describe the hardware components and overall functions for all three of the PLSS subsystems. The various modes of operations for the PLSS are also presented. A comparison of the proposed PLSS to the Apollo and Shuttle PLSS designs is presented, highlighting several anticipated improvements over the historical PLSS architectures.

MS Grunsfeld and Linnehan on middeck after EVA 1

NASA Image and Video Library

2002-03-04

STS109-349-027 (4 March 2002) --- Astronauts John M. Grunsfeld and Richard M. Linnehan, STS-109 payload commander and mission specialist, respectively, wearing the liquid cooling and ventilation garment that complements the Extravehicular Mobility Unit (EMU) space suit, are photographed on the mid deck of the Space Shuttle Columbia after the mission’s first session of extravehicular activity (EVA). The EVA-1 team replaced one of the telescope’s two second-generation solar arrays, which is also known as SA2, and a Diode Box Assembly. The solar array was replaced with a new, third-generation solar array, which is called SA3. The space walkers also did some prep work for STS-109’s other space walks.

Effect of Compression Garments on Physiological Responses After Uphill Running.

PubMed

Struhár, Ivan; Kumstát, Michal; Králová, Dagmar Moc

2018-03-01

Limited practical recommendations related to wearing compression garments for athletes can be drawn from the literature at the present time. We aimed to identify the effects of compression garments on physiological and perceptual measures of performance and recovery after uphill running with different pressure and distributions of applied compression. In a random, double blinded study, 10 trained male runners undertook three 8 km treadmill runs at a 6% elevation rate, with the intensity of 75% VO2max while wearing low, medium grade compression garments and high reverse grade compression. In all the trials, compression garments were worn during 4 hours post run. Creatine kinase, measurements of muscle soreness, ankle strength of plantar/dorsal flexors and mean performance time were then measured. The best mean performance time was observed in the medium grade compression garments with the time difference being: medium grade compression garments vs. high reverse grade compression garments. A positive trend in increasing peak torque of plantar flexion (60º·s-1, 120º·s-1) was found in the medium grade compression garments: a difference between 24 and 48 hours post run. The highest pain tolerance shift in the gastrocnemius muscle was the medium grade compression garments, 24 hour post run, with the shift being +11.37% for the lateral head and 6.63% for the medial head. In conclusion, a beneficial trend in the promotion of running performance and decreasing muscle soreness within 24 hour post exercise was apparent in medium grade compression garments.

Multi-zone cooling/warming garment

NASA Technical Reports Server (NTRS)

Leon, Gloria R. (Inventor); Koscheyev, Victor S. (Inventor); Dancisak, Michael J. (Inventor)

2006-01-01

A thermodynamically efficient garment for cooling and/or heating a human body. The thermodynamic efficiency is provided in part by targeting the heat exchange capabilities of the garment to specific areas and/or structures of the human body. The heat exchange garment includes heat exchange zones and one or more non-heat exchange zones, where the heat exchange zones are configured to correspond to one or more high density tissue areas of the human body when the garment is worn. A system including the garment can be used to exchange heat with the adjacent HD tissue areas under the control of a feedback control system. Sensed physiological parameters received by the feedback control system can be used to adjust the characteristics of heat exchange fluid moving within the heat exchange garment.

Clothing creator trademark : Business plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stern, B.

SYMAGERY has developed a patented process to manufacture clothing without direct human labor. This CLOTHING CREATOR{trademark}, will have the ability to produce two (2) perfect garments every 45 seconds or one (1) every 30 seconds. The process will combine Computer Integrated Manufacturing (CIM) technology with heat molding and ultrasonic bonding/cutting techniques. This system for garment production, will have the capacity to produce garments of higher quality and at lower productions costs than convention cut and sew methods. ADVANTAGES of the process include: greatly reduced production costs; increased quality of garments; reduction in lead time; and capacity to make new classmore » of garments. This technology will accommodate a variety of knit, woven and nonwoven materials containing a majority of synthetic fibers. Among the many style of garments that could be manufactured by this process are: work clothing, career apparel, athletic garments, medical disposables, health care products, activewear, haz/mat garments, military clothing, cleanroom clothing, outdoor wear, upholstery, and highly contoured stuffed toy shells. 3 refs.« less

Ventilated vest and tolerance for intermittent exercise in hot, dry conditions with military clothing.

PubMed

Barwood, Martin J; Newton, Phillip S; Tipton, Michael J

2009-04-01

Recent research has focused on developing air-ventilated garments to improve evaporative cooling in military settings. This study assessed a ventilated vest (Vest) in hot (45 degrees C), dry (10% RH) ambient conditions over 6 h of rest and exercise. It was hypothesized that the Vest would lower the thermal strain and increase the amount of exercise done by subjects. Eight healthy heat-acclimated men, wearing combat clothing, body armor, and a 19-kg load in webbing walked on a treadmill at 5 km h(-1) at a 2% incline until rectal temperature (T(rec)) reached 38.5 degrees C. They then rested until T(re) reached 38 degrees C, at which point they recommenced walking. On one occasion the subjects wore a Vest, blowing ambient air around the torso. On the second occasion subjects did not wear the vest (NoVest). Exercise/rest ratio, T(rec), skin temperature (T(sk)), sweat responses, rating of perceived exertion (RPE), and thermal comfort (TC) were measured. Subjects wearing theVest exercised for significantly longer (18%; 11 min/h) as a percentage of total exposure time, stopped exercise significantly less often [Mean (SD); NoVest: 3 (2) stops; Vest: 1 (2) stops], and maintained significantly lower skin temperature under the body armor [T(chest): NoVest 37.55 (0.51) degrees C; Vest: 35.33 (1.00) degrees C; T(back): NoVest: 36.85 (0.83) degrees C; Vest: 35.84 (0.88) degrees C]. The Vest provided 28 W of cooling during exercise and 73 W when at rest as estimated by thermometry. A ventilated vest can provide cooling, and thereby reduce thermal strain and increase exercise done in dry environmental temperatures up to 45 degrees C, without causing skin irritation and discomfort.

The roles of garment design and scene complexity in the daytime conspicuity of high-visibility safety apparel.

PubMed

Sayer, James R; Buonarosa, Mary Lynn

2008-01-01

This study examines the effects of high-visibility garment design on daytime pedestrian conspicuity in work zones. Factors assessed were garment color, amount of background material, pedestrian arm motion, scene complexity, and driver age. The study was conducted in naturalistic conditions on public roads in real traffic. Drivers drove two passes on a 31-km route and indicated when they detected pedestrians outfitted in the fluorescent garments. The locations of the vehicle and the pedestrian were recorded. Detection distances between fluorescent yellow-green and fluorescent red-orange garments were not significantly different, nor were there any significant two-way interactions involving garment color. Pedestrians were detected at longer distances in lower complexity scenes. Arm motion significantly increased detection distances for pedestrians wearing a Class 2 vest, but had little added benefit on detection distances for pedestrians wearing a Class 2 jacket. Daytime detection distances for pedestrians wearing Class 2 or Class 3 garments are longest when the complexity of the surround is low. The more background information a driver has to search through, the longer it is likely to take the driver to locate a pedestrian--even when wearing a high-visibility garment. These findings will provide information to safety garment manufacturers about characteristics of high-visibility safety garments which make them effective for daytime use.

Use of compression garments by women with lymphoedema secondary to breast cancer treatment.

PubMed

Longhurst, E; Dylke, E S; Kilbreath, S L

2018-02-19

This aim of this study was to determine the use of compression garments by women with lymphoedema secondary to breast cancer treatment and factors which underpin use. An online survey was distributed to the Survey and Review group of the Breast Cancer Network Australia. The survey included questions related to the participants' demographics, breast cancer and lymphoedema medical history, prescription and use of compression garments and their beliefs about compression and lymphoedema. Data were analysed using principal component analysis and multivariable logistic regression. Compression garments had been prescribed to 83% of 201 women with lymphoedema within the last 5 years, although 37 women had discontinued their use. Even when accounting for severity of swelling, type of garment(s) and advice given for use varied across participants. Use of compression garments was driven by women's beliefs that they were vulnerable to progression of their disease and that compression would prevent its worsening. Common reasons given as to why women had discontinued their use included discomfort, and their lymphoedema was stable. Participant characteristics associated with discontinuance of compression garments included their belief that (i) the garments were not effective in managing their condition, (ii) experienced mild-moderate swelling and/or (iii) had experienced swelling for greater than 5 years. The prescription of compression garments for lymphoedema is highly varied and may be due to lack of underpinning evidence to inform treatment.

Layering garments during rest and exercise in the cold (8°C): wearer responses and comparability with selected fabric properties.

PubMed

MacRae, Braid A; Laing, Raechel M; Wilson, Cheryl A; Niven, Brian E

2014-01-01

How garments contribute to performance of the clothing system during wear is of interest, as is understanding the value of using fabric properties to inform end-use characteristics. To investigate the influences of layering upper-body garments, four fabrics were used to construct two first-layer garments (wool and polyester) and two outer-layer garments (wool and membrane laminate). Over six sessions, 10 moderately trained males wore each first-layer garment as a single layer and in combination with each outer-layer garment while resting, running and walking in cold environmental conditions (8 ± 1°C, 81 ± 4% RH). Here, the type of garment arrangement worn (fabric type or number of layers) had little influence on heart rate, core body temperature and change in body mass. Weighted mean covered skin temperature was warmer and weighted mean next-to-skin vapour pressure was typically higher (following the onset of exercise) with two layers versus one. Differences among fabrics for individual properties were typically overstated compared to differences among corresponding garments for physiological and psychophysical variables under the conditions of this study. These findings inform the interpretation of particular fabric properties and highlight issues to be acknowledged during development/refinement of fabric test methods. We examined the way in which selected fibre, fabric and garment (layering) characteristics contribute to performance of the clothing system during wear under cold conditions. Selected properties of the constituent fabrics were found to provide limited insight into how garments perform during wear under the conditions of this study.

77 FR 51514 - Steel Wire Garment Hangers From the Socialist Republic of Vietnam: Preliminary Affirmative...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-24

... DEPARTMENT OF COMMERCE International Trade Administration [A-552-812] Steel Wire Garment Hangers... preliminary determination in the antidumping duty investigation of steel wire garment hangers from the... withdrawing its participation from this investigation.\\5\\ \\1\\ See Steel Wire Garment Hangers From the...

77 FR 66952 - Steel Wire Garment Hangers From the People's Republic of China: Antidumping Duty Administrative...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-08

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-918] Steel Wire Garment Hangers... (``the Department'') is conducting the third administrative review of steel wire garment hangers from the... Wire Garment Hangers From the People's Republic of China: Preliminary Results and Preliminary...

77 FR 73424 - Steel Wire Garment Hangers From Taiwan: Antidumping Duty Order

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-10

... DEPARTMENT OF COMMERCE International Trade Administration [A-583-849] Steel Wire Garment Hangers... ``ITC''), the Department is issuing an antidumping duty order on steel wire garment hangers from Taiwan... antidumping duty investigation of steel wire garment hangers from Taiwan.\\1\\ On November 29, 2012, the ITC...

77 FR 72884 - Steel Wire Garment Hangers From Taiwan

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-06

... INTERNATIONAL TRADE COMMISSION [Investigation No. 731-TA-1197 (Final)] Steel Wire Garment Hangers... injured by reason of imports of steel wire garment hangers from Taiwan, provided for in subheading 7326.20... notification of a preliminary determination by Commerce that imports of steel wire garment hangers from Taiwan...

75 FR 42685 - Steel Wire Garment Hangers From the People's Republic of China: Initiation of Anti-Circumvention...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-22

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-918] Steel Wire Garment Hangers...-circumvention inquiry to determine whether certain imports of steel wire garment hangers from the Socialist Republic of Vietnam (``Vietnam'') are circumventing the antidumping duty order on steel wire garment...

77 FR 75973 - Certain Steel Wire Garment Hangers From the Socialist Republic of Vietnam: Final Affirmative...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-26

... DEPARTMENT OF COMMERCE International Trade Administration [C-552-813] Certain Steel Wire Garment...) determines that countervailable subsidies are being provided to producers and exporters of steel wire garment... Companies). \\1\\ See Steel Wire Garment Hangers From the Socialist Republic of Vietnam: Initiation of...

77 FR 28354 - Steel Wire Garment Hangers From the People's Republic of China: Extension of Time Limit for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-14

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-918] Steel Wire Garment Hangers... International Trade Compliance Analyst, Office 9, regarding Third Administrative Review of Steel Wire Garment..., Import Administration; regarding the Antidumping Duty Administrative Review of Steel Garment Wire Hangers...

High visibility safety apparel and nighttime conspicuity of pedestrians in work zones.

PubMed

Sayer, James R; Mefford, Mary Lynn

2004-01-01

Every year numerous occupational fatalities result from pedestrians being struck by motor vehicles intruding into work zones. Attributes of retroreflective personal safety garments on pedestrian conspicuity at night were assessed in a field study. Using instrumented vehicles on a closed track, participants drove through simulated work zones attempting to detect pedestrians located in the work zones. Configuration of the retroreflective trim, trim color, placement in the work zone, and driver age significantly affected pedestrian conspicuity. Intensity and the amount of retroreflective trim did not. Personal safety garments incorporating retroreflective trim significantly improve pedestrian conspicuity in work zones. The results emphasize the importance of retroreflective trim on personal safety garments, particularly if the trim is located on garment sleeves. We examine the design attributes that contribute to making a personal safety garment conspicuous. The results have implications regarding preferred garment designs, industry standards, and service life of personal safety garments.

16 CFR 1616.31 - Labeling, recordkeeping, retail display and guaranties.

Code of Federal Regulations, 2010 CFR

2010-01-01

... process of manufacture of each production unit of articles of children's sleepwear, or fabrics or related... production unit or by style. A style is a garment design or grouping, preselected by the manufacturer. A... garment design or on the garment packages. A style is a garment design or grouping, preselected by the...

75 FR 68758 - Steel Wire Garment Hangers From the People's Republic of China: Preliminary Results and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-09

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-918] Steel Wire Garment Hangers... first administrative review of the antidumping duty order on steel wire garment hangers from the People... steel wire garment hangers (``hangers'') from the PRC. See Notice of Antidumping Duty Order: Steel Wire...

77 FR 40853 - Steel Wire Garment Hangers From the People's Republic of China: Partial Rescission of Antidumping...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-11

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-918] Steel Wire Garment Hangers... administrative review of the antidumping duty order on steel wire garment hangers from the People's Republic of... the Secretary of Commerce ``Third Administrative Review of Steel Wire Garment Hangers from China...

77 FR 14002 - Steel Wire Garment Hangers From the Socialist Republic of Vietnam: Notice of Postponement of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-08

... DEPARTMENT OF COMMERCE International Trade Administration [C-552-813] Steel Wire Garment Hangers From the Socialist Republic of Vietnam: Notice of Postponement of Preliminary Determination in the... investigation of steel wire garment hangers from the Socialist Republic of Vietnam. See Steel Wire Garment...

77 FR 73430 - Steel Wire Garment Hangers From the Socialist Republic of Vietnam: Preliminary Affirmative...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-10

... DEPARTMENT OF COMMERCE International Trade Administration [C-552-813] Steel Wire Garment Hangers... respect to imports of steel wire garment hangers from the Socialist Republic of Vietnam (Vietnam) with the... Department of Commerce building. \\3\\ See Steel Wire Garment Hangers From the Socialist Republic of Vietnam...

77 FR 3737 - Steel Wire Garment Hangers From the Socialist Republic of Vietnam: Initiation of Countervailing...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-25

... DEPARTMENT OF COMMERCE International Trade Administration [C-552-813] Steel Wire Garment Hangers... countervailing duty (CVD) petition concerning imports of steel wire garment hangers from the Socialist Republic...). See Petition for the Imposition of Antidumping Duties on Steel Wire Garment Hangers from Taiwan and...

78 FR 8107 - Certain Steel Wire Garment Hangers From the Socialist Republic of Vietnam: Countervailing Duty Order

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-05

... DEPARTMENT OF COMMERCE International Trade Administration [C-552-813] Certain Steel Wire Garment... Department is issuing a countervailing duty order on certain steel wire garment hangers from the Socialist... its final determination in the countervailing duty investigation of certain steel wire garment hangers...

76 FR 28953 - Steel Wire Garment Hangers From the People's Republic of China: Extension of Time Limits for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-19

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-918] Steel Wire Garment Hangers... administrative review of the antidumping duty order on steel wire garment hangers from the People's Republic of... Trade Compliance Analyst, Office 9, regarding the Second Administrative Review of Steel Wire Garment...

77 FR 9701 - Steel Wire Garment Hangers From Taiwan And Vietnam

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-17

...)] Steel Wire Garment Hangers From Taiwan And Vietnam Determinations On the basis of the record \\1... injured by reason of imports from Taiwan and Vietnam of steel wire garment hangers, provided for in... the United States at less than fair value (LTFV) and steel wire garment hangers from Vietnam that are...

78 FR 70271 - Steel Wire Garment Hangers From the People's Republic of China: Preliminary Results of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-25

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-918] Steel Wire Garment Hangers... the antidumping duty order on steel wire garment hangers from the People's Republic of China (``PRC... comment on these preliminary results. \\1\\ See Notice of Antidumping Duty Order: Steel Wire Garment Hangers...

Alternative Compression Garments

NASA Technical Reports Server (NTRS)

Stenger, M. B.; Lee, S. M. C.; Ribeiro, L. C.; Brown, A. K.; Westby, C. M.; Platts, S. H.

2011-01-01

Orthostatic intolerance after spaceflight is still an issue for astronauts as no in-flight countermeasure has been 100% effective. Future anti-gravity suits (AGS) may be similar to the Shuttle era inflatable AGS or may be a mechanical compression device like the Russian Kentavr. We have evaluated the above garments as well as elastic, gradient compression garments of varying magnitude and determined that breast-high elastic compression garments may be a suitable replacement to the current AGS. This new garment should be more comfortable than the AGS, easy to don and doff, and as effective a countermeasure to orthostatic intolerance. Furthermore, these new compression garments could be worn for several days after space flight as necessary if symptoms persisted. We conducted two studies to evaluate elastic, gradient compression garments. The purpose of these studies was to evaluate the comfort and efficacy of an alternative compression garment (ACG) immediately after actual space flight and 6 degree head-down tilt bed rest as a model of space flight, and to determine if they would impact recovery if worn for up to three days after bed rest.

A comparison of the effects of a special gynaecological garment and music in reducing the anxiety related to gynaecological examination.

PubMed

Kocabaş, Pembegül; Khorshid, Leyla

2012-03-01

To investigate the effect of a special gynaecological garment and music plus the special gynaecological garment on reducing the state anxiety related to gynaecological examination. Gynaecological examination is one of the most common anxiety-producing medical procedures and causes embarrassment and discomfort. Few studies have focused on the effect of a gynaecological garment on anxiety associated with gynaecological examinations. The patients were allocated to one of three groups, one control and two experimental. While the patients in the control group were subjected to the normal outpatient procedure, the patients in the first experimental group were dressed in a special gynaecological garment. In the control group, gynaecological examinations were performed with a traditional one-piece drape. In addition to wearing the special gynaecological garment, the women in the garment + music group listened to music during the gynaecological examination. The State Anxiety Inventory Form was applied to the patients in all three groups before and after gynaecological examination. The state anxiety level after gynaecological examination in patients in the control group was found to be higher, but it was found to be lower in patients in both the first experimental group (garment) and the second experimental group (garment + music). The state anxiety level was found to be more reduced in the experimental groups than in the control group. The state anxiety level after gynaecological examination was found to be higher in single patients in the second experimental group. The special gynaecological garments are effective in reducing the state anxiety associated with gynaecological examination. It should be taken into consideration that women perceived state anxiety during the gynaecological examinations. To allay anxiety associated with gynaecological examination in women, a special garment may be considered. © 2011 Blackwell Publishing Ltd.

Synthetic garments enhance comfort, thermoregulatory response, and athletic performance compared with traditional cotton garments.

PubMed

Hooper, David R; Cook, Brendan M; Comstock, Brett A; Szivak, Tunde K; Flanagan, Shawn D; Looney, David P; DuPont, William H; Kraemer, William J

2015-03-01

The ability of a fabric to transfer moisture is referred to as "wicking," and an increase in this property may have benefits in terms of comfort and thermoregulation. However, this phenomenon has not been studied in the context of sporting-type activities. Therefore, the purpose of this study is to assess whether comfort, thermal physiological parameters, and physical performance can be affected by the garment that is used. Ten men (age: 27.5 ± 4.4 years; height: 169.3 ± 14.2 cm; weight: 80.05 ± 10.87 kg) and 10 women (age: 26.8 ± 3.7 years; height: 166.6 ± 4.46 cm; weight: 64.63 ± 4.49 kg) volunteered to participate in the study. A within-group crossover counterbalanced design was used that included the Illinois Agility Run (IAR) and the Multistage Fitness Test (MSFT). The IAR was also performed while wearing protective padding. The protocol was completed on 2 occasions, once while wearing a cotton garment (C) and again while wearing a polyester (P) garment. Questionnaires referring to sensations of various components of comfort were completed after each test. The P garment provided significantly (p ≤ 0.05) greater comfort in men and women after both the IAR and the MSFT. The P garment led to significantly (p ≤ 0.05) improved performance during the IAR in women. The P garment also provided significantly (p ≤ 0.05) greater body mass loss during the protocol in women. This study demonstrated dramatic increases in the comfort of P garments, including while using protective equipment. This study also discovered the influence of P garments on anaerobic tasks and also revealed dramatic sex differences, where women seem to be much more sensitive to the benefits of P garments. Strength and conditioning coaches should be aware of the dramatic impact of garment choice, in aerobic and anaerobic tasks, particularly in women.

Development of Gradient Compression Garments for Protection Against Post Flight Orthostatic Intolerance

NASA Technical Reports Server (NTRS)

Stenger, M. B.; Lee, S. M. C.; Westby, C. M.; Platts, S. H.

2010-01-01

Orthostatic intolerance after space flight is still an issue for astronaut health. No in-flight countermeasure has been 100% effective to date. NASA currently uses an inflatable anti-gravity suit (AGS) during reentry, but this device is uncomfortable and loses effectiveness upon egress from the Shuttle. The Russian Space Agency currently uses a mechanical counter-pressure garment (Kentavr) that is difficult to adjust alone, and prolonged use may result in painful swelling at points where the garment is not continuous (feet, knees, and groin). To improve comfort, reduce upmass and stowage requirements, and control fabrication and maintenance costs, we have been evaluating a variety of gradient compression, mechanical counter-pressure garments, constructed from spandex and nylon, as a possible replacement for the current AGS. We have examined comfort and cardiovascular responses to knee-high garments in normovolemic subjects; thigh-high garments in hypovolemic subjects and in astronauts after space flight; and 1-piece, breast-high garments in hypovolemic subjects. These gradient compression garments provide 55 mmHg of compression over the ankle, decreasing linearly to 35 mmHg at the knee. In thigh-high versions the compression continues to decrease to 20 mmHg at the top of the leg, and for breast-high versions, to 15 mmHg over the abdomen. Measures of efficacy include increased tilt survival time, elevated blood pressure and stroke volume, and lower heart-rate response to orthostatic stress. Results from these studies indicate that the greater the magnitude of compression and the greater the area of coverage, the more effective the compression garment becomes. Therefore, we are currently testing a 3-piece breast-high compression garment on astronauts after short-duration flight. We chose a 3-piece garment consisting of thigh-high stockings and shorts, because it is easy to don and comfortable to wear, and should provide the same level of protection as the 1-piece breast-high garments evaluated in hypovolemic test subjects.

Impact of using scatter-mimicking beams instead of standard beams to measure penetration when assessing the protective value of radiation-protective garments.

PubMed

Jones, A Kyle; Pasciak, Alexander S; Wagner, Louis K

2018-03-01

Use standardized methods to determine how assessment of protective value of radiation-protective garments changes under conditions employing standard beam qualities, scatter-mimicking primary beams, and a modified H p (10) measurement. The shielding properties of radiation-protective garments depend on the spectrum of beam energies striking the garment and the attenuation properties of materials used to construct the garment, including x-ray fluorescence produced by these materials. In this study the primary beam spectra employed during clinical interventional radiology and cardiology procedures (clinical primary beams, CPB) were identified using radiation dose structured reports (RDSR) and fluoroscope log data. Monte Carlo simulation was used to determine the scattered radiation spectra produced by these CPB during typical clinical application. For these scattered spectra, scatter-mimicking primary beams (SMPB) were determined using numerical optimization-based spectral reconstruction that adjusted kV and filtration to produce the SMPB that optimally matched the scattered spectrum for each CPB. The penetration of a subset of SMPB through four radiation-protective garments of varying compositions and nominal thicknesses was measured using a geometry specified by the International Electrotechnical Commission (IEC). The diagnostic radiological index of protection (DRIP), which increases with increasing penetration through a garment, was calculated using these measurements. Penetration through the same garments was measured for standard beams specified by the American Society of Testing and Materials (ASTM). Finally, 10 mm of PMMA was affixed to the inside of each garment and the DRIP remeasured in this configuration to simulate H p (10). The SMPB based on actual CPB were in general characterized by lower kV (range 60-76) and higher half-value layer (HVL, range 3.44-4.89 mm Al) than standard beam qualities specified by ASTM (kV range 70-85; HVL range 3.4-4.0 mm Al). A lead garment of nominal thickness 0.5 mm (D) had a DRIP of 0.8%, two lead-free garments of 0.5 mm nominal thickness had DRIPs of 1.2% (A) and 2.2% (B), and a lead-free bilayer (C) had a DRIP of 1.4%. When standard beam qualities specified by the ASTM were used, the DRIP for D was 2.2%, 175% higher than the DRIP measured using SMPB, and for A, B, and C was 2.8%, 3.2%, and 2.9%, respectively. This was 133%, 45%, and 107% higher than the DRIP measured using SMPB. Differences between the DRIP of lead-alternative garments and the lead garment were reduced when measured with 10 mm of PMMA. Using this method, the measured DRIPs were 2.2% (A), 3.1% (B), 2.5% (C), and 2.3% (D). Penetration of radiation through radiation-protective garments depended strongly on the methods and X-ray spectra used for evaluation. The DRIP was higher (i.e., protective value was lower) for lead-alternative garments than for lead garments in this evaluation. The DRIP was lower for all garments when SMPB based on actual clinical beam quality data were used to measure penetration compared to ASTM standard beams. Differences in penetration between lead-alternative and lead garments were less when the DRIP was measured with 10 mm of PMMA between the garment and the chamber. © 2018 American Association of Physicists in Medicine.

78 FR 8105 - Steel Wire Garment Hangers From the Socialist Republic of Vietnam: Antidumping Duty Order

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-05

... DEPARTMENT OF COMMERCE International Trade Administration [A-552-812] Steel Wire Garment Hangers...''), the Department is issuing an antidumping duty order on steel wire garment hangers from the Socialist... investigation of steel wire garment hangers from Vietnam.\\1\\ On January 28, 2013, pursuant to section 735(d) of...

77 FR 75980 - Steel Wire Garment Hangers From the Socialist Republic of Vietnam: Final Determination of Sales...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-26

... DEPARTMENT OF COMMERCE International Trade Administration [A-552-812] Steel Wire Garment Hangers... less than fair value (``LTFV'') in the antidumping investigation of steel wire garment hangers from the... Determination of sales at LTFV. We continue to determine that steel wire garment hangers from Vietnam are being...

78 FR 28803 - Steel Wire Garment Hangers From the People's Republic of China: Final Results of Antidumping Duty...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-16

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-918] Steel Wire Garment Hangers... review of the antidumping duty order on steel wire garment hangers from the People's Republic of China..., 2010, through September 30, 2011. \\1\\ See Steel Wire Garment Hangers from the People's Republic of...

77 FR 70993 - Steel Wire Garment Hangers From the People's Republic of China: 2011-2012 Initiation of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-28

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-918] Steel Wire Garment Hangers... for a new shipper review (``NSR'') of the antidumping duty order on steel wire garment hangers from... antidumping duty order on steel wire garment hangers from the PRC (``the Order'') was published on October 6...

77 FR 50713 - Steel Wire Garment Hangers From Taiwan and Vietnam; (Corrected Notice) Scheduling of the Final...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-22

...)] Steel Wire Garment Hangers From Taiwan and Vietnam; (Corrected Notice) Scheduling of the Final Phase of... the United States is materially retarded, by reason of subsidized imports from Vietnam of steel wire garment hangers and less- than-fair-value imports from Taiwan and Vietnam of steel wire garment hangers...

77 FR 50160 - Steel Wire Garment Hangers From Taiwan and Vietnam; Scheduling of the Final Phase of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-20

...)] Steel Wire Garment Hangers From Taiwan and Vietnam; Scheduling of the Final Phase of Countervailing Duty... States is materially retarded, by reason of subsidized imports from Taiwan of steel wire garment hangers and less- than-fair-value imports from Taiwan and Vietnam of steel wire garment hangers, provided for...

77 FR 19191 - Steel Wire Garment Hangers From the People's Republic of China: Amended Final Results of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-30

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-918] Steel Wire Garment Hangers... results of the second administrative review of the antidumping duty order on steel wire garment hangers... not change the current rates of any other parties. \\1\\ See Steel Wire Garment Hangers From the People...

77 FR 12553 - Steel Wire Garment Hangers From the People's Republic of China: Final Results and Final Partial...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-01

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-918] Steel Wire Garment Hangers... duty order \\1\\ on steel wire garment hangers from the People's Republic of China (``PRC'').\\2\\ We gave... Duty Order: Steel Wire Garment Hangers From the People's Republic of China, 73 FR 58111 (October 6...

Study on the integration approaches to CAD/CAPP/FMS in garment CIMS

NASA Astrophysics Data System (ADS)

Wang, Xiankui; Tian, Wensheng; Liu, Chengying; Li, Zhizhong

1995-08-01

Computer integrated manufacturing system (CIMS), as an advanced methodology, has been applied in many industry fields. There is, however, little research on the application of CIMS in the garment industry, especially on the integrated approach to CAD, CAPP, and FMS in garment CIMS. In this paper, the current situations of CAD, CAPP, and FMS in the garment industry are discussed, and information requirements between them as well as the integrated approaches are also investigated. The representation of the garments' product data by the group technology coding is proposed. Based on the group technology, a shared data base as an integration element can be constructed, which leads to the integration of CAD/CAPP/FMS in garment CIMS.

Determining localized garment insulation values from manikin studies: computational method and results.

PubMed

Nelson, D A; Curlee, J S; Curran, A R; Ziriax, J M; Mason, P A

2005-12-01

The localized thermal insulation value expresses a garment's thermal resistance over the region which is covered by the garment, rather than over the entire surface of a subject or manikin. The determination of localized garment insulation values is critical to the development of high-resolution models of sensible heat exchange. A method is presented for determining and validating localized garment insulation values, based on whole-body insulation values (clo units) and using computer-aided design and thermal analysis software. Localized insulation values are presented for a catalog consisting of 106 garments and verified using computer-generated models. The values presented are suitable for use on volume element-based or surface element-based models of heat transfer involving clothed subjects.

Development and fabrication of an advanced liquid cooling garment

NASA Technical Reports Server (NTRS)

Hixon, C. W.

1978-01-01

A tube/fin concept liquid cooling garment head cooler was developed, fabricated and delivered to NASA-ARC. The head cooler was fabricated from polyurethane film which sandwiches the transport fluid tubing and a thermally conductive fin material. The head cooler garment is sewn to form a skull cap and covered with a comfort liner. In addition, two Neonate heating garments were fabricated and supplied to NASA for further finishing and use in medical tests. The resulting garment is flexible, elastic and conforms to the head comfortably. Tests on a tube/fin element of identical construction as the head cooler demonstrated good thermal effectiveness. Use of commercially available materials and development of relatively simple fabrication techniques give the potential for a low garment cost.

Morphing Compression Garments for Space Medicine and Extravehicular Activity Using Active Materials.

PubMed

Holschuh, Bradley T; Newman, Dava J

2016-02-01

Compression garments tend to be difficult to don/doff, due to their intentional function of squeezing the wearer. This is especially true for compression garments used for space medicine and for extravehicular activity (EVA). We present an innovative solution to this problem by integrating shape changing materials-NiTi shape memory alloy (SMA) coil actuators formed into modular, 3D-printed cartridges-into compression garments to produce garments capable of constricting on command. A parameterized, 2-spring analytic counterpressure model based on 12 garment and material inputs was developed to inform garment design. A methodology was developed for producing novel SMA cartridge systems to enable active compression garment construction. Five active compression sleeve prototypes were manufactured and tested: each sleeve was placed on a rigid cylindrical object and counterpressure was measured as a function of spatial location and time before, during, and after the application of a step voltage input. Controllable active counterpressures were measured up to 34.3 kPa, exceeding the requirement for EVA life support (29.6 kPa). Prototypes which incorporated fabrics with linear properties closely matched analytic model predictions (4.1%/-10.5% error in passive/active pressure predictions); prototypes using nonlinear fabrics did not match model predictions (errors >100%). Pressure non-uniformities were observed due to friction and the rigid SMA cartridge structure. To our knowledge this is the first demonstration of controllable compression technology incorporating active materials, a novel contribution to the field of compression garment design. This technology could lead to easy-to-don compression garments with widespread space and terrestrial applications.

Immune functions of the garment workers.

PubMed

Sultana, R; Ferdous, K J; Hossain, M; Zahid, M S H; Islam, L N

2012-10-01

Occupational exposure to cotton dust, fibers, metal fumes and different chemicals used in the aparrel manufacturing industries cause a wide range of physical and psychological health problems in the garment workers that may also affect their immune function. To assess the immune system function in garment workers. A total of 45 workers of a garment factory, and 41 control subjects, not exposed to the garment working environment were enrolled in this study. In the study subjects, the complement system function was assessed as bactericidal activity on Escherichia coli DH5α cells using the standard plate count method. Serum complement components C3 and C4 were measured by immunoprecipitation, and IgG was measured by immunonephelometry. The bactericidal activity of serum complement in the garment workers (range: 93.5%-99.9%) was significantly (p<0.01) lower than that in the controls (range: 98.6%-100%). The heat-inactivated serum of the workers showed a significantly enhanced bactericidal activity. In the garment workers, the mean levels of complement C3, and C4 were 1.75 and 0.26 g/L, respectively that were close to those of the controls. The mean IgG level in the garment workers was 13.5 g/L that was significantly (p<0.001) higher than that in the controls. Working in a garment factory may affect the immune system.

76 FR 27994 - First Administrative Review of Steel Wire Garment Hangers From the People's Republic of China...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-13

... of Steel Wire Garment Hangers From the People's Republic of China: Final Results and Final Partial... antidumping duty order on steel wire garment hangers from the People's Republic of China (``PRC'').\\1\\ We gave... period of review (``POR''), March 25, 2008, through November 30, 2009. \\1\\ See Steel Wire Garment Hangers...

National Workplace Literacy Program. Garment-Related Bilingual (English & Chinese) T.V. Broadcast Lessons. Book II: Episodes 16-27.

ERIC Educational Resources Information Center

Chinatown Manpower Project, Inc., New York, NY.

This publication contains a series of 12 garment-related bilingual (English and Chinese) television broadcast lessons that were produced to augment an earlier series of 15 lessons. The objective of these television lessons is to teach garment-related English terminology to the garment workers who cannot attend classes in the National Workplace…

Use of a Garment as an Alternative to Body Painting in Equine Musculoskeletal Anatomy Teaching.

PubMed

Sattin, Mariana M; Silva, Vickitoriana K A; Leandro, Rafael M; Foz Filho, Roberto P P; De Silvio, Mauricio M

Living anatomy is gaining increasing popularity as an alternative to the use of preserved cadaver specimens in musculoskeletal anatomy teaching. This article describes the development of a garment painted with musculoskeletal structures as an alternative to body painting. Garments offer some advantages over traditional body painting in anatomy teaching. The technique can be used across different disciplines, enhances students' ability to identify anatomic structures in living bodies, and provides insights into the topography of one or more body systems at the same time. The fact that garments are amenable to palpation by large groups of students with no damage to the painting favors repeated use in hands-on wet labs. Garments such as the one described in this article introduce a novel approach to interdisciplinary teaching and learning, which can be combined with traditional anatomy teaching methods. The first garment produced depicts part of the equine musculoskeletal system. Steps in garment construction are highlighted and indications, advantages, and limitations of the method discussed.

Pressure garment design tool to monitor exerted pressures.

PubMed

Macintyre, Lisa; Ferguson, Rhona

2013-09-01

Pressure garments are used in the treatment of hypertrophic scarring following serious burns. The use of pressure garments is believed to hasten the maturation process, reduce pruritus associated with immature hypertrophic scars and prevent the formation of contractures over flexor joints. Pressure garments are normally made to measure for individual patients from elastic fabrics and are worn continuously for up to 2 years or until scar maturation. There are 2 methods of constructing pressure garments. The most common method, called the Reduction Factor method, involves reducing the patient's circumferential measurements by a certain percentage. The second method uses the Laplace Law to calculate the dimensions of pressure garments based on the circumferential measurements of the patient and the tension profile of the fabric. The Laplace Law method is complicated to utilise manually and no design tool is currently available to aid this process. This paper presents the development and suggested use of 2 new pressure garment design tools that will aid pressure garment design using the Reduction Factor and Laplace Law methods. Both tools calculate the pressure garment dimensions and the mean pressure that will be exerted around the body at each measurement point. Monitoring the pressures exerted by pressure garments and noting the clinical outcome would enable clinicians to build an understanding of the implications of particular pressures on scar outcome, maturation times and patient compliance rates. Once the optimum pressure for particular treatments is known, the Laplace Law method described in this paper can be used to deliver those average pressures to all patients. This paper also presents the results of a small scale audit of measurements taken for the fabrication of pressure garments in two UK hospitals. This audit highlights the wide range of pressures that are exerted using the Reduction Factor method and that manual pattern 'smoothing' can dramatically change the actual Reduction Factors used. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

Clinical Evaluation of Protective Garments with Respect to Garment Characteristics and Manufacturer Label Information.

PubMed

Lichliter, Andrew; Weir, Victor; Heithaus, Robert Evans; Gipson, Sean; Syed, Almas; West, James; Rees, Chet

2017-01-01

To test operator exposures inside radiation protection garments in a simulated clinical setup, examining trends related to multiple characteristics. Sixteen garment models containing lead or nonlead materials and a suspended device (Zero-Gravity) were tested for operator exposure from X rays scattered from an acrylic patient phantom. Weight and surface area were determined. The operator phantom was a wooden frame containing a dosimeter in its cavity. Garments were draped over the frame, and the setup was placed in a typical working position. There was substantial variability in exposures for all garments, ranging from 0.52 to 13.8 µSv/h (mean, 5.39 µSv/h ± 3.82), with a 12-fold difference for garments labeled 0.5 mm Pb equivalent. Most of the especially poor protectors were nonlead, even when not lightweight. Nonlead models were not more protective per weight overall. For closed-back garments labeled 0.5 mm Pb equivalent, mean exposures were lower for lead than for nonlead materials (mean, 1.48 µSv/h ± 0.434 vs 6.26 µSv/h ± 5.13, respectively). Density per exposure -1 was lower for lead than nonlead materials in the 0.5-mm Pb equivalent group, counter to advertised claims. Open-back configurations were lighter than closed (3.3 kg vs 6.0 kg, respectively), with similar mean exposures (5.30 µSv/h vs 5.39 µSv/h, respectively). The lowest exposure was 0.52 µSv/h (9.8% of the mean of all garments) for the suspended device. Operator exposure in a realistic interventional setup is highly variable for similarly labeled protective garments, highlighting the necessity of internal validation when considering nonlead and lightweight models. Copyright © 2016 SIR. Published by Elsevier Inc. All rights reserved.

Pressure prediction model for compression garment design.

PubMed

Leung, W Y; Yuen, D W; Ng, Sun Pui; Shi, S Q

2010-01-01

Based on the application of Laplace's law to compression garments, an equation for predicting garment pressure, incorporating the body circumference, the cross-sectional area of fabric, applied strain (as a function of reduction factor), and its corresponding Young's modulus, is developed. Design procedures are presented to predict garment pressure using the aforementioned parameters for clinical applications. Compression garments have been widely used in treating burning scars. Fabricating a compression garment with a required pressure is important in the healing process. A systematic and scientific design method can enable the occupational therapist and compression garments' manufacturer to custom-make a compression garment with a specific pressure. The objectives of this study are 1) to develop a pressure prediction model incorporating different design factors to estimate the pressure exerted by the compression garments before fabrication; and 2) to propose more design procedures in clinical applications. Three kinds of fabrics cut at different bias angles were tested under uniaxial tension, as were samples made in a double-layered structure. Sets of nonlinear force-extension data were obtained for calculating the predicted pressure. Using the value at 0° bias angle as reference, the Young's modulus can vary by as much as 29% for fabric type P11117, 43% for fabric type PN2170, and even 360% for fabric type AP85120 at a reduction factor of 20%. When comparing the predicted pressure calculated from the single-layered and double-layered fabrics, the double-layered construction provides a larger range of target pressure at a particular strain. The anisotropic and nonlinear behaviors of the fabrics have thus been determined. Compression garments can be methodically designed by the proposed analytical pressure prediction model.

Liquid cooled garments

NASA Technical Reports Server (NTRS)

1975-01-01

Liquid cooled garments employed in several applications in which severe heat is encountered are discussed. In particular, the use of the garments to replace air line cooling units in a variety of industrial processing situations is discussed.

Cooling Effectiveness of a Hybrid Microclimate Garment

DTIC Science & Technology

1988-04-01

ELEMENT NO . NO . NO . JCCESSION NO .63747 D669 35 Cooling Effectiveness of a Hybrid Microclimate Garment (U) 12. PERSONAL AUTHOR(S) Barry S...be arranged. Therefore, no direct measurement of the cooling rate achieved by the air garments was obtained. After calculation of the liquid cooling...Cooling Performance. There was no significant difference between the levels of heat removed by the liquid and hybrid-liquid garments . The measured

Labeled line drawing of launch and entry suit identifies various components

NASA Technical Reports Server (NTRS)

1988-01-01

Line drawings illustrate how a crewmember would be seated during space shuttle launch and entry in the mission specialist seat wearing the launch and entry suit (LES), a partial pressure suit. Front and profile drawings are labeled with numbers. The legend for the views includes: 1) Mission Specialist seat; 2) crewman; 3) helmet; 4) anti-exposure / counter pressure garment; 5) boots; 6) parachute harness; 7) parachute pack; 8) life raft with sea dye marker; 9) suit mounted oxygen (O2) manifold; 10) anti-gravity (anti-g) suit controller; 11) emergency O2 supply; 12) seawars; 13) ventilation fan; 14) orbiter O2 line; 15) headset interface unit (HIU); 16) communication (COMM) line to HIU; 17) flotation device. Crew escape system (CES) and LES was designed for STS-26, the return to flight mission, and subsequent missions.

A protocol for monitoring soft tissue motion under compression garments during drop landings.

PubMed

Mills, Chris; Scurr, Joanna; Wood, Louise

2011-06-03

This study used a single-subject design to establish a valid and reliable protocol for monitoring soft tissue motion under compression garments during drop landings. One male participant performed six 40 cm drop landings onto a force platform, in three compression conditions (none, medium high). Five reflective markers placed on the thigh under the compression garment and five over the garment were filmed using two cameras (1000 Hz). Following manual digitisation, marker coordinates were reconstructed and their resultant displacements and maximum change in separation distance between skin and garment markers were calculated. To determine reliability of marker application, 35 markers were attached to the thigh over the high compression garment and filmed. Markers were then removed and re-applied on three occasions; marker separation and distance to thigh centre of gravity were calculated. Results showed similar ground reaction forces during landing trials. Significant reductions in the maximum change in separation distance between markers from no compression to high compression landings were reported. Typical errors in marker movement under and over the garment were 0.1mm in medium and high compression landings. Re-application of markers showed mean typical errors of 1mm in marker separation and <3mm relative to thigh centre of gravity. This paper presents a novel protocol that demonstrates sufficient sensitivity to detect reductions in soft tissue motion during landings in high compression garments compared to no compression. Additionally, markers placed under or over the garment demonstrate low variance in movement, and the protocol reports good reliability in marker re-application. Copyright © 2011 Elsevier Ltd. All rights reserved.

Contribution of garment fit and style to thermal comfort at the lower body

NASA Astrophysics Data System (ADS)

Mert, Emel; Böhnisch, Sonja; Psikuta, Agnes; Bueno, Marie-Ange; Rossi, René M.

2016-12-01

The heat and mass transfer between the human body and the environment is not only affected by the properties of the fabric, but also by the size of the air gap thickness and the magnitude of the contact area between the body and garment. In this clothing-human-environment system, there is also an interaction between the clothing and the physiological response of the wearer. Therefore, the aim of this study was to evaluate the distribution of the air gap thickness and the contact area for the male lower body in relation to the garment fit and style using a three-dimensional (3D) body scanning method with a manikin. Moreover, their relation with the physiological response of the lower body was analysed using the physiological modelling. The presented study showed that the change in the air gap thickness and the contact area due to garment fit was greater for legs than the pelvis area due to regional differences of the body. Furthermore, the garment style did not have any effect on the core temperature or total water loss of the lower body, whereas the effect of garment fit on the core temperature and total water loss of lower body was observed only for 40 °C of ambient temperature. The skin temperatures were higher for especially loose garments at thigh than the tight garments. Consequently, the results of this study indicated that the comfort level of the human body for a given purpose can be adjusted by selection of fabric type and the design of ease allowances in the garment depending on the body region.

Feasibility study of automatic control of crew comfort in the shuttle Extravehicular Mobility Unit. [liquid cooled garment regulator

NASA Technical Reports Server (NTRS)

Cook, D. W.

1977-01-01

Computer simulation is used to demonstrate that crewman comfort can be assured by using automatic control of the inlet temperature of the coolant into the liquid cooled garment when input to the controller consists of measurements of the garment inlet temperature and the garment outlet temperature difference. Subsequent tests using a facsimile of the control logic developed in the computer program confirmed the feasibility of such a design scheme.

Evaluation of three-dimensional virtual perception of garments

NASA Astrophysics Data System (ADS)

Aydoğdu, G.; Yeşilpinar, S.; Erdem, D.

2017-10-01

In recent years, three-dimensional design, dressing and simulation programs came into prominence in the textile industry. By these programs, the need to produce clothing samples for every design in design process has been eliminated. Clothing fit, design, pattern, fabric and accessory details and fabric drape features can be evaluated easily. Also, body size of virtual mannequin can be adjusted so more realistic simulations can be created. Moreover, three-dimensional virtual garment images created by these programs can be used while presenting the product to end-user instead of two-dimensional photograph images. In this study, a survey was carried out to investigate the visual perception of consumers. The survey was conducted for three different garment types, separately. Questions about gender, profession etc. was asked to the participants and expected them to compare real samples and artworks or three-dimensional virtual images of garments. When survey results were analyzed statistically, it is seen that demographic situation of participants does not affect visual perception and three-dimensional virtual garment images reflect the real sample characteristics better than artworks for each garment type. Also, it is reported that there is no perception difference depending on garment type between t-shirt, sweatshirt and tracksuit bottom.

A right to live: girl workers in the Bangladeshi garment industry.

PubMed

Wahra, G N; Rahman, F

1995-06-01

According to a survey conducted in 1989, there are 772 approved and registered garment factories in Bangladesh. These factories employ approximately 300,000 individuals, 90% of whom are women. A more recent estimate in a Bangladeshi newspaper, however, posits that up to five million people are directly or indirectly dependent upon the garment industry. Many of the women who work in Bangladesh's garment factories are under age 15 years. In some countries, such as the US, the employment of such young individuals constitutes a violation of child labor laws. Therefore, under the Harkin Bill, the US will no longer import garments produced by children younger than age 15 years. Many garment workers under age 15 years have already been put out of work or will soon be terminated. The authors explain that while the intent of the Harkin Bill may be to protect children, it is difficult to adopt the moral high ground in a poor country like Bangladesh. Regardless of one's age in Bangladesh, having a job may be the only way to survive. No job often means no food or shelter. The authors discuss women in the garment industry, one girl's case, alternative employment opportunities, and the future.

Variable-thermoinsulation garments with a microprocessor temperature controller.

PubMed

Kurczewska, Agnieszka; Leánikowski, Jacek

2008-01-01

This paper presents the concept of active variable thermoinsulation clothing for users working in low temperatures. Those garments contain heating inserts regulated by a microprocessor temperature controller. This paper also presents the results of tests carried out on the newly designed garments.

Contribution of garment fit and style to thermal comfort at the lower body.

PubMed

Mert, Emel; Böhnisch, Sonja; Psikuta, Agnes; Bueno, Marie-Ange; Rossi, René M

2016-12-01

The heat and mass transfer between the human body and the environment is not only affected by the properties of the fabric, but also by the size of the air gap thickness and the magnitude of the contact area between the body and garment. In this clothing-human-environment system, there is also an interaction between the clothing and the physiological response of the wearer. Therefore, the aim of this study was to evaluate the distribution of the air gap thickness and the contact area for the male lower body in relation to the garment fit and style using a three-dimensional (3D) body scanning method with a manikin. Moreover, their relation with the physiological response of the lower body was analysed using the physiological modelling. The presented study showed that the change in the air gap thickness and the contact area due to garment fit was greater for legs than the pelvis area due to regional differences of the body. Furthermore, the garment style did not have any effect on the core temperature or total water loss of the lower body, whereas the effect of garment fit on the core temperature and total water loss of lower body was observed only for 40 °C of ambient temperature. The skin temperatures were higher for especially loose garments at thigh than the tight garments. Consequently, the results of this study indicated that the comfort level of the human body for a given purpose can be adjusted by selection of fabric type and the design of ease allowances in the garment depending on the body region.

The views of children and young people on the use of silk garments for the treatment of eczema: a nested qualitative study within the CLOTHing for the relief of Eczema Symptoms (CLOTHES) randomized controlled trial.

PubMed

Wake, E V; Batchelor, J; Lawton, S; Thomas, K S; Harrison, E F; Cowdell, F C

2018-01-01

Many children suffer with skin diseases but to date most dermatological research has been done 'on' rather than 'with' children; in this study we actively sought the experiences of children and young people. Atopic eczema (AE) is a chronic, itchy, inflammatory skin condition that affects around 20% of children and can impact on the health and wellbeing of children and their families. The role of specialist clothing in the management of AE is poorly understood. The aim of this study, which was nested in a randomized controlled trial, was to qualitatively examine child participants' experiences of using silk garments for the treatment of AE. Eighteen children aged 5-15 years, who took part in the CLOTHing for the relief of Eczema Symptoms (CLOTHES) trial, participated in age-appropriate individual interviews or focus groups. Thematic analysis generated four themes directly related to the silk garments: (i) expectations of the garments; (ii) wearing the garments; (iii) asking if the garments helped; and (iv) thoughts about the garments. The conclusions from this nested qualitative study are that there was some limited improvement in eczema for some children but that the hoped-for 'miracle cure' did not transpire. A mixed picture of knowledge, beliefs and experiences of using the silk garments emerged. Engaging children in the evaluation of the garments provided first-hand nuanced insights that enhanced understanding of the CLOTHES study as a whole. This nested study demonstrates that children can and indeed want to be engaged in dermatological research in meaningful ways that add to our understanding of treatment options. © 2017 British Association of Dermatologists.

Physical and psychological health problems of garment workers in the Fiji.

PubMed

Chand, Anand

2006-09-01

This paper unravels the physical and psychological health problems of garment workers in Fiji. It is based on research work done between 1997-2007. Majority of the garment workers are women. The main physical health problems faced by workers are: 'Occupational fatigue syndrome', body pains, obesity, and bladder and kidney problems. The major psychological problems work stress and depression. Work stress and depression are caused by 'intensification of work' to meet daily targets, strict factory rules and regulations, poor pay, poor working conditions, in-human abuse, and fear of job loss. Since garment workers do not have much education and skills they have no other option but to work for the garment industry and suffer in silence.

DEMONSTRATION OF WATERBASED PLATEN ADHESIVES FOR GARMENT SCREEN PRINTERS

EPA Science Inventory

The paper discusses a demonstration of waterbased platen adhesives as a viable alternative to the organic-based aerosol adhesives that are predominantly used by garment screen printers to affix garments or fabric pieces to print platens. o demonstrate this, the effectiveness of s...

Biological Isolation Garment

NASA Technical Reports Server (NTRS)

1976-01-01

A spinoff of astronaut's biological garment will allow hospital patients who are highly vulnerable to infection to leave their sterile habitats for several hours, carrying their germ free environment with them. Garments can be used in any of some 200 hospitals where isolation rooms are installed to treat leukemia.

Microprocessor Control For Liquid-Cooled Garment

NASA Technical Reports Server (NTRS)

Weaver, Charles S.

1990-01-01

Automatic control system maintains temperature of water-cooled garment within comfort zone while wearer's level of physical activity varies. Uncomfortable overshoots and undershoots of temperature eliminated. Designed for use in space suit, adaptable to other protective garments and to enclosed environments operating according to similar principles.

Crew Survivability After a Rapid Cabin Depressurization Event

NASA Technical Reports Server (NTRS)

Sargusingh, Miriam J.

2012-01-01

Anecdotal evidence acquired through historic failure investigations involving rapid cabin decompression (e.g. Challenger, Columbia and Soyuz 11) show that full evacuation of the cabin atmosphere may occur within seconds. During such an event, the delta-pressure between the sealed suit ventilation system and the cabin will rise at the rate of the cabin depressurization; potentially at a rate exceeding the capability of the suit relief valve. It is possible that permanent damage to the suit pressure enclosure and ventilation loop components may occur as the integrated system may be subjected to delta pressures in excess of the design-to pressures. Additionally, as the total pressure of the suit ventilation system decreases, so does the oxygen available to the crew. The crew may be subjected to a temporarily incapacitating, but non-lethal, hypoxic environment. It is expected that the suit will maintain a survivable atmosphere on the crew until the vehicle pressure control system recovers or the cabin has otherwise attained a habitable environment. A common finding from the aforementioned reports indicates that the crew would have had a better chance at surviving the event had they been in a protective configuration, that is, in a survival suit. Making use of these lessons learned, the Constellation Program implemented a suit loop in the spacecraft design and required that the crew be in a protective configuration, that is suited with gloves on and visors down, during dynamic phases of flight that pose the greatest risk for a rapid and uncontrolled cabin depressurization event: ascent, entry, and docking. This paper details the evaluation performed to derive suit pressure garment and ventilation system performance parameters that would lead to the highest probability of crew survivability after an uncontrolled crew cabin depressurization event while remaining in the realm of practicality for suit design. This evaluation involved: (1) assessment of stakeholder expectations to validate the functionality being imposed; (2) review/refinement of concept of operations to establish the potential triggers for such an event and define the response of the spacecraft and suit ventilation loop pressure control systems; and (3) assessment of system capabilities with respect to structural capability and pressure control.

Standardized Curriculum for Commercial Garment and Apparel Construction.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

Standardized curricula are provided for two courses for the secondary vocational education program in Mississippi: commercial garment and apparel construction I and II. The seven units in commercial garment and apparel construction I are as follows: orientation; securing a job; human relations; safety; maintenance; needle trade techniques; and…

Perceived Fashionability of a Garment as Inferred from the Age and Body Type of the Wearer.

ERIC Educational Resources Information Center

Clayton, Ruth; And Others

1987-01-01

Ninety college-aged females rated the fashionability of six garments worn by nine models representing three age levels and three body types. Results show respondents used age and body type cues as well as fashion detail to judge garment fashionability. (Author/CH)

76 FR 27007 - Steel Wire Garment Hangers From the People's Republic of China: Affirmative Preliminary...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-10

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-918] Steel Wire Garment Hangers... Administration, Department of Commerce. Preliminary Determination We preliminarily determine that steel wire... Act of 1930, as amended (``the Act''). See Notice of Antidumping Duty Order: Steel Wire Garment...

78 FR 7452 - Steel Wire Garment Hangers From Vietnam; Determinations

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-01

... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701-TA-487 and 731-TA-1198 (Final)] Steel Wire...), that an industry in the United States is materially injured by reason of imports of steel wire garment... duty orders on steel wire garment hangers from Vietnam. Background The Commission instituted these...

Comprehensive evaluation of garment assembly line with simulation

NASA Astrophysics Data System (ADS)

Xu, Y.; Thomassey, S.; Chen, Y.; Zeng, X.

2017-10-01

In this paper, a comprehensive evaluation system is established to assess the garment production performance. It is based on performance indicators and supported with the corresponding results obtained by manual calculation or computer simulation. The assembly lines of a typical men’s shirt are taken as the study objects. With the comprehensive evaluation results, garments production arrangement scenarios are better analysed and then the appropriate one is supposed to be put into actual production. This will be a guidance given to companies on quick decision-making and multi-objective optimization of garment production.

Reproducibility of repeated measurements with the Kikuhime pressure sensor under pressure garments in burn scar treatment.

PubMed

Van den Kerckhove, Eric; Fieuws, Steffen; Massagé, Patrick; Hierner, Robert; Boeckx, Willy; Deleuze, Jean-Paul; Laperre, Jan; Anthonissen, Mieke

2007-08-01

This study investigated the reproducibility of repeated measurements with the Kikuhime pressure sensor under two different types of pressure garments used in the treatment and prevention of scars after burns. Also efficiency of garments was assessed in clinical circumstances by assessing pressure loss and residual pressure after 1 month. Intra- and inter-observer reproducibility and repeated measurements with 1-month time lapse were examined on 55 sites in 26 subjects by means of intra-class correlation coefficients and standard error of measurements. Results showed good to excellent ICC and low SEMs in the two conditions. There was a significant difference in pressure after 1 month between elastic tricot and weft knit garments, although evolution of pressure loss after 1 month was similar. Concerning different locations, there was a significant difference in pressure loss after 1 month between gloves and sleeves with the largest pressure loss for sleeves. Considering these results we concluded that the Kikuhime pressure sensor provides valid and reliable information and can be used in comparative clinical trials to evaluate pressure garments used in burn scar treatment. Secondly, elastic tricot garments in our study tended to have higher clinical pressures but both types of garments had similar pressure loss over time.

Application of the diagnostic radiological index of protection to protective garments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pasciak, Alexander S.; Jones, A. Kyle, E-mail: kyle.jones@mdanderson.org; Wagner, Louis K.

2015-02-15

Purpose: Previously, the diagnostic radiological index of protection (DRIP) was proposed as a metric for quantifying the protective value of radioprotective garments. The DRIP is a weighted sum of the percent transmissions of different radiation beams through a garment. Ideally, the beams would represent the anticipated stray radiation encountered during clinical use. However, it is impractical to expect a medical physicist to possess the equipment necessary to accurately measure transmission of scattered radiation. Therefore, as a proof of concept, the authors tested a method that applied the DRIP to clinical practice. Methods: Primary beam qualities used in interventional cardiology andmore » radiology were observed and catalogued. Based on the observed range of beam qualities, five representative clinical primary beam qualities, specified by kV and added filtration, were selected for this evaluation. Monte Carlo simulations were performed using these primary beams as source definitions to generate scattered spectra from the clinical primary beams. Using numerical optimization, ideal scatter mimicking primary beams, specified by kV and added aluminum filtration, were matched to the scattered spectra according to half- and quarter-value layers and spectral shape. To within reasonable approximation, these theoretical scatter-mimicking primary beams were reproduced experimentally in laboratory x ray beams and used to measure transmission through pure lead and protective garments. For this proof of concept, the DRIP for pure lead and the garments was calculated by assigning equal weighting to percent transmission measurements for each of the five beams. Finally, the areal density of lead and garments was measured for consideration alongside the DRIP to assess the protective value of each material for a given weight. Results: The authors identified ideal scatter mimicking primary beams that matched scattered spectra to within 0.01 mm for half- and quarter-value layers in copper and within 5% for the shape function. The corresponding experimental scatter-mimicking primary beams matched the Monte Carlo generated scattered spectra with maximum deviations of 6.8% and 6.6% for half- and quarter-value layers. The measured DRIP for 0.50 mm lead sheet was 2.0, indicating that it transmitted, on average, 2% of incident radiation. The measured DRIP for a lead garment and one lead-alternative garment closely matched that for pure lead of 0.50 mm thickness. The DRIP for other garments was substantially higher than 0.50 mm lead (3.9–5.4), indicating they transmitted about twice as much radiation. When the DRIP was plotted versus areal density, it was clear that, of the garments tested, none were better than lead on a weight-by-weight basis. Conclusions: A method for measuring the DRIP for protective garments using scatter-mimicking primary beams was developed. There was little discernable advantage in protective value per unit weight for lead-alternative versus lead-only garments. Careful consideration must be given to the balance of protection and weight when choosing a lead-alternative protective garment with a lower specified “lead equivalence,” e.g., 0.35 mm. The DRIP has the potential to resolve this dilemma. Reporting the DRIP relative to areal density is an ideal metric for objective comparisons of protective garment performance, considering both protective value in terms of transmission of radiation and garment weight.« less

Degradation of fluorescent high-visibility colors used in safety garments for the Australian railway industry.

PubMed

Vijayan, Arun; Islam, Saniyat; Jones, Michael; Padhye, Rajiv; Arnold, Lyndon

2016-02-01

This study investigated the compliance of four fluorescent orange high-visibility garment substrates that are predominantly used in the Australian railway industry. While Special Purpose Orange (SPO), a shade of the Fluorescent orange (Fl-orange) is recommended by most Australian states as the high-visibility background color of a safety garment, there appear to be variations in the background color of clothing used by line-workers and rail contractors. The color of the garment was assessed for compliance with the Australian Standard AS/NZS 1906.2.2010 for high-visibility materials for safety garments. The results were also compared with ANSI Z535.2011 and BS EN ISO 20471.2013 Standards. Photometric and colorimetric assessments of the background color of the garment substrates were performed using a spectrophotometer and were evaluated for compliance with the Standards after washing and exposure to UV. The spectrophotometry measurements showed that Fl-orange background color for all samples except one complied with the AS/NZS 1906.2 Standard for daytime high-visibility garments after 20 washes but failed to comply after exposure to UV. It was also found that the chromaticity coordinates of the corners of the Fl-orange color space, specified in the AS/NZS 1906.4.2010 Standard are much wider and yellower when compared with the ANSI Z535.1.2011 and BS EN ISO 20471.2013 Standards. The sample that failed to comply with the Australian and American Standards however complied with the ISO Standard. Irrespective of the Standard used, the research has shown the degrading effect of washing and light exposure and raises the questions as to how regularly, and under what conditions high-visibility garments need to be replaced. These findings will provide information for safety garment manufacturers about the characteristics and performance of high-visibility safety garments which make them conspicuous during daytime use. This research recommends that colors for railway workers should be chosen based on the conspicuity, commercial viability, reproducibility and durability rather than simply adopting standards from other industry domains or other countries. Copyright © 2015 Elsevier Ltd and National Safety Council. All rights reserved.

A comprehensive approach to evaluating and classifying sun-protective clothing.

PubMed

Downs, N J; Harrison, S L

2018-04-01

National standards for clothing designed to protect the wearer from the harmful effects of solar ultraviolet radiation (UVR) have been implemented in Australia/New Zealand, Europe and the U.S.A. Industry standards reflect the need to protect the skin by covering a considerable proportion of the potentially exposed body surface area (BSA) and by reducing UVR-transmission through fabric (the Ultraviolet Protection Factor; UPF). This research aimed to develop a new index for rating sun-protective clothing that incorporates the BSA coverage of the garment in addition to the UPF of the fabric. A mannequin model was fixed to an optical bench and marked with horizontal lines at 1-cm intervals. An algorithm (the Garment Protector Factor; GPF) was developed based on the number of lines visible on the clothed vs. unclothed mannequin and the UPF of the garment textile. This data was collected in 2015/16 and analysed in 2016. The GPF weights fabric UPF by BSA coverage above the minimum required by international sun-protective clothing standards for upper-body, lower-body and full-body garments. The GPF increases with BSA coverage of the garment and fabric UPF. Three nominal categories are proposed for the GPF: 0 ≤ GPF < 3 for garments that 'meet' minimum standards; 3 ≤ GPF < 6 for garments providing 'good' sun protection; and GPF ≥ 6 indicating 'excellent' protection. Adoption of the proposed rating scheme should encourage manufacturers to design sun-protective garments that exceed the minimum standard for BSA coverage, with positive implications for skin cancer prevention, consumer education and sun-protection awareness. © 2017 British Association of Dermatologists.

Space Flight Orthostatic Intolerance Protection

NASA Technical Reports Server (NTRS)

Luty, Wei

2009-01-01

This paper summarizes investigations conducted on different orthostatic intolerance protection garments. This paper emphasizes on the engineering and operational aspects of the project. The current Shuttle pneumatic Anti-G Suit or AGS at 25 mmHg (0.5 psi) and customized medical mechanical compressive garments (20-30 mmHg) were tested on human subjects. The test process is presented. The preliminary results conclude that mechanical compressive garments can ameliorate orthostatic hypotension in hypovolemic subjects. A mechanical compressive garment is light, small and works without external pressure gas source; however the current garment design does not provide an adjustment to compensate for the loss of mass and size in the lower torso during long term space missions. It is also difficult to don. Compression garments that do not include an abdominal component are less effective countermeasures than garments which do. An early investigation conducted by the Human Adaptation and Countermeasures Division at Johnson Space Center (JSC) has shown there is no significant difference between the protection function of the AGS (at 77 mmHg or 1.5 psi) and the Russian anti-g suit, Kentavr (at 25 mmHg or 0.5 psi). Although both garments successfully countered hypovolemia-induced orthostatic intolerance, the Kentavr provided protection by using lower levels of compression pressure. This more recent study with a lower AGS pressure shows that pressures at 20-30 mmHg is acceptable but protection function is not as effective as higher pressure. In addition, a questionnaire survey with flight crewmembers who used both AGS and Kentavr during different missions was also performed.

77 FR 3731 - Steel Wire Garment Hangers From the Socialist Republic of Vietnam and Taiwan: Initiation of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-25

... DEPARTMENT OF COMMERCE International Trade Administration [A-552-812, A-583-849] Steel Wire...'') petition concerning imports of steel wire garment hangers from Vietnam and Taiwan filed in proper form on..., as amended (the ``Act''), Petitioners allege that imports of steel wire garment hangers from Vietnam...

76 FR 14918 - Steel Wire Garment Hangers From the People's Republic of China: Partial Rescission of Antidumping...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-18

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-918] Steel Wire Garment Hangers From the People's Republic of China: Partial Rescission of Antidumping Duty Administrative Review... administrative review of the antidumping duty order on steel wire garment hangers from the People's Republic of...

77 FR 28356 - Steel Wire Garment Hangers From the Socialist Republic of Vietnam and Taiwan: Postponement of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-14

... DEPARTMENT OF COMMERCE International Trade Administration [A-552-812, A-583-849] Steel Wire... investigations of steel wire garment hangers from the Socialist Republic of Vietnam (``Vietnam'') and Taiwan.\\1...\\ See Steel Wire Garment Hangers From the Socialist Republic of Vietnam and Taiwan: Initiation of...

77 FR 806 - Steel Wire Garment Hangers From Taiwan and Vietnam; Institution of Antidumping and Countervailing...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-06

... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701-TA-487 and 731-TA-1197-1198 (Preliminary)] Steel Wire Garment Hangers From Taiwan and Vietnam; Institution of Antidumping and Countervailing Duty... Vietnam of steel wire garment hangers, provided for in subheading 7326.20 of the Harmonized Tariff...

An ergonomic garment design for elderly Turkish men.

PubMed

Civitci, S Sule

2004-05-01

This paper presents an ergonomic garment design for elderly Turkish men. The purpose of this study was to determine elderly men's demands, needs and problems in regard to clothing and to design an ergonomic garment in the light of this knowledge. The sample consisted of 120 elderly men living in Ankara, the capital city of Turkey, and its province. A questionnaire was prepared and given to these people in order to determine their clothing demands and needs. It was established that most of our subjects need functional garments. An ergonomic garment has been designed using the obtained data. It was found that the design of clothing for the elderly requires attention to bodily changes from aging in order to facilitate and raise the quality of life. Specific suggestions are made to elderly people and to the ready-to-wear sector.

Automatic control of liquid cooling garment by cutaneous and external auditory meatus temperatures

NASA Technical Reports Server (NTRS)

Fulcher, C. W. G. (Inventor)

1971-01-01

An automatic control apparatus for a liquid cooling garment is described that is responsive to actual physiological needs during work and rest periods of a man clothed in the liquid cooling garment. Four skin temperature readings and a reading taken at the external portion of the auditory meatus are added and used in the control signal for a temperature control valve regulating inlet water temperature for the liquid cooling garment. The control apparatus comprises electronic circuits to which the temperatures are applied as control signals and an electro-pneumatic transducer attached to the control valve.

Early cessation of pressure garment therapy results in scar contraction and thickening

PubMed Central

DeBruler, Danielle M.; Zbinden, Jacob C.; Baumann, Molly E.; Blackstone, Britani N.; Malara, Megan M.; Bailey, J. Kevin

2018-01-01

Pressure garment therapy is often prescribed to improve scar properties following full-thickness burn injuries. Pressure garment therapy is generally recommended for long periods of time following injury (1–2 years), though it is plagued by extremely low patient compliance. The goal of this study was to examine the effects of early cessation of pressure garment therapy on scar properties. Full-thickness burn injuries were created along the dorsum of red Duroc pigs. The burn eschar was excised and wound sites autografted with split-thickness skin. Scars were treated with pressure garments within 1 week of injury and pressure was maintained for either 29 weeks (continuous pressure) or for 17 weeks followed by cessation of pressure for an additional 12 weeks (pressure released); scars receiving no treatment served as controls. Scars that underwent pressure garment therapy were significantly smoother and less contracted with decreased scar height compared to control scars at 17 weeks. These benefits were maintained in the continuous pressure group until week 29. In the pressure released group, grafts significantly contracted and became more raised, harder and rougher after the therapy was discontinued. Pressure cessation also resulted in large changes in collagen fiber orientation and increases in collagen fiber thickness. The results suggest that pressure garment therapy effectively improves scar properties following severe burn injury; however, early cessation of the therapy results in substantial loss of these improvements. PMID:29897933

Early cessation of pressure garment therapy results in scar contraction and thickening.

PubMed

DeBruler, Danielle M; Zbinden, Jacob C; Baumann, Molly E; Blackstone, Britani N; Malara, Megan M; Bailey, J Kevin; Supp, Dorothy M; Powell, Heather M

2018-01-01

Pressure garment therapy is often prescribed to improve scar properties following full-thickness burn injuries. Pressure garment therapy is generally recommended for long periods of time following injury (1-2 years), though it is plagued by extremely low patient compliance. The goal of this study was to examine the effects of early cessation of pressure garment therapy on scar properties. Full-thickness burn injuries were created along the dorsum of red Duroc pigs. The burn eschar was excised and wound sites autografted with split-thickness skin. Scars were treated with pressure garments within 1 week of injury and pressure was maintained for either 29 weeks (continuous pressure) or for 17 weeks followed by cessation of pressure for an additional 12 weeks (pressure released); scars receiving no treatment served as controls. Scars that underwent pressure garment therapy were significantly smoother and less contracted with decreased scar height compared to control scars at 17 weeks. These benefits were maintained in the continuous pressure group until week 29. In the pressure released group, grafts significantly contracted and became more raised, harder and rougher after the therapy was discontinued. Pressure cessation also resulted in large changes in collagen fiber orientation and increases in collagen fiber thickness. The results suggest that pressure garment therapy effectively improves scar properties following severe burn injury; however, early cessation of the therapy results in substantial loss of these improvements.

Effects of a whole-body spandex garment on rectal temperature and oxygen consumption in healthy dogs.

PubMed

Reimer, S Brent; Schulz, Kurt S; Mason, David R; Jones, James H

2004-01-01

To determine whether a full-body spandex garment would alter rectal temperatures of healthy dogs at rest in cool and warm environments. Prospective study. 10 healthy dogs. Each dog was evaluated at a low (20 degrees to 25 degrees C [68 degrees to 77 degrees F]) or high (30 degrees to 35 degrees C [86 degrees to 95 degrees F]) ambient temperature while wearing or not wearing a commercially available whole-body spandex garment designed for dogs. Oxygen consumption was measured by placing dogs in a flow-through indirect calorimeter for 90 to 120 minutes. Rectal temperature was measured before dogs were placed in the calorimeter and after they were removed. Rectal temperature increased significantly more at the higher ambient temperature than at the lower temperature and when dogs were not wearing the garment than when they were wearing it. The specific rate of oxygen consumption was significantly higher at the lower ambient temperature than at the higher temperature. Results suggest that wearing a snug spandex body garment does not increase the possibility that dogs will overheat while in moderate ambient temperatures. Instead, wearing such a garment may enable dogs to better maintain body temperature during moderate heat loading. These results suggest that such garments might be used for purposes such as wound or suture protection without causing dogs to overheat.

76 FR 1134 - Steel Wire Garment Hangers From the People's Republic of China: Extension of Time Limit for Final...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-07

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-918] Steel Wire Garment Hangers From the People's Republic of China: Extension of Time Limit for Final Results of the Antidumping Duty...'') published the preliminary results of this administrative review. See Steel Wire Garment Hangers From the...

Gradient Compression Stockings may Prevent Recovery after Bed Rest Deconditioning

NASA Technical Reports Server (NTRS)

Stenger, Michael B.; Lee, Stuart M.; Westby, Christian M.; Willig, Michael C.; Platts, Steven H.

2011-01-01

Introduction: Astronauts continue to wear a compression garment during and immediately after landing to prevent orthostatic intolerance (OI). We recently developed a custom-fitted, 3-piece garment that consists of thigh-high stockings with biker-style shorts that provides continuous, gradient compression: 55 mmHg at the ankle that decreases to approximately 20 mmHg at the top of the leg and 15 mmHg over the abdomen. This garment has been shown to be effective in preventing symptoms of OI during a short stand test after Space Shuttle missions, but symptoms may persist for several days after a long-duration mission in some astronauts. The purpose of this study was to confirm the effectiveness of wearing these elastic, gradient compression garments during orthostatic testing after 2 weeks of 6 degree head-down tilt bed rest as a model of spaceflight and to determine whether they would impact recovery after bed rest. Methods: Eight (5 treatment, 3 control) of 16 subjects have completed this study to-date. All subjects wore the 3-piece garment from waking until tilt testing (3 h) as a simulation of the timeline for astronauts on landing day (BR+0). Control subjects removed the garment after the tilt test. Treatment subjects wore the garment for the remainder of the day and wore lower compression thigh-high only garments on the day after bed rest (BR+1). Blood pressure, heart rate, and stroke volume responses to a 15-min 80 degree head-up tilt test were determined before 2 weeks of 6 degree head-down tilt, and on BR+0 and BR+1. Plasma volume (PV) was measured before each of these test sessions. Data are mean SE. Results: Compression garments prevented signs of OI on BR+0; all subjects in both groups completed the full 15-min test. Heart rate responses to tilt were lower on BR+0 than all other test days. Control subjects demonstrated a marginal PV decrease after bed rest, but showed typical recovery the day after bed rest (BR+0: 2.32 plus or minus 0.15 L to BR+1: 2.79 plus or minus 0.15 L). Treatment subjects did not recover PV the day after bed rest (BR+0: 2.61 plus or minus 0.23 L to BR+1: 2.61 plus or minus 0.23 L). Conclusion: Abdomen-high compression garments, which are effective in preventing post-bed rest orthostatic intolerance, may slow recovery of PV. Modified garments with reduced compression may be necessary to prevent prolonging recovery.

Pressure garment therapy alone and in combination with silicone for the prevention of hypertrophic scarring: randomized controlled trial with intraindividual comparison.

PubMed

Steinstraesser, Lars; Flak, Ewa; Witte, Bernd; Ring, Andrej; Tilkorn, Daniel; Hauser, Jörg; Langer, Stefan; Steinau, Hans-Ulrich; Al-Benna, Sammy

2011-10-01

Published trials evaluating pressure garment and/or silicone therapy as a treatment for hypertrophic burn scarring are of poor quality and highly susceptible to bias. The authors' aim was to compare the efficacy of pressure garment therapy alone and in combination with silicone gel sheet or spray therapy for the prevention of hypertrophic scarring. The authors conducted an open, single-center, randomized controlled study with intraindividual comparison of study preparations and control to standard treatment. Forty-three consecutive patients with two comparable areas of split-thickness graft burn wounds were recruited into the study, and 38 patients were followed up for 18 months. All patients received compression garments and were randomized to one of two treatment groups: (1) self-drying silicone spray and compression versus compression alone and (2) silicone sheeting and compression versus compression alone. Clinical assessment, measurement of scar redness, height, and photographic documentation of each treated area were performed at different visits over an 18-month follow-up period. Significance was tested using repeated-measures analyses and Wilcoxon paired-sample signed rank tests. Use of pressure garment therapy alone produced results equivalent to those of combined silicone and pressure garment therapy in the prevention of hypertrophic scars. The efficacy of silicone spray therapy was comparable to that of silicone gel sheet therapy in the prevention of hypertrophic scars. Patients treated with silicone spray had fewer side effects when compared with the silicone sheet group. Multimodal therapy with silicone and pressure garment therapy failed to prevent hypertrophic scars beyond that observed with pressure garment therapy alone. Therapeutic, II.

The effects of compression garments on intermittent exercise performance and recovery on consecutive days.

PubMed

Duffield, Rob; Edge, Johann; Merrells, Robert; Hawke, Emma; Barnes, Matt; Simcock, David; Gill, Nicholas

2008-12-01

The aim of this study was to determine whether compression garments improve intermittent-sprint performance and aid performance or self-reported recovery from high-intensity efforts on consecutive days. Following familiarization, 14 male rugby players performed two randomized testing conditions (with or without garments) involving consecutive days of a simulated team sport exercise protocol, separated by 24 h of recovery within each condition and 2 weeks between conditions. Each day involved an 80-min high-intensity exercise circuit, with exercise performance determined by repeated 20-m sprints and peak power on a cart dynamometer (single-man scrum machine). Measures of nude mass, heart rate, skin and tympanic temperature, and blood lactate (La-) were recorded throughout each day; also, creatine kinase (CK) and muscle soreness were recorded each day and 48 h following exercise. No differences (P=.20 to 0.40) were present between conditions on either day of the exercise protocol for repeated 20-m sprint efforts or peak power on a cart dynamometer. Heart rate, tympanic temperature, and body mass did not significantly differ between conditions; however, skin temperature was higher under the compression garments. Although no differences (P=.50) in La- or CK were present, participants felt reduced levels of perceived muscle soreness in the ensuing 48 h postexercise when wearing the garments (2.5+/-1.7 vs 3.5+/-2.1 for garment and control; P=.01). The use of compression garments did not improve or hamper simulated team-sport activity on consecutive days. Despite benefits of reduced self-reported muscle soreness when wearing garments during and following exercise each day, no improvements in performance or recovery were apparent.

LOx breathing system with gas permeable-liquid impermeable heat exchange and delivery hose

DOEpatents

Hall, M.N.

1996-04-30

Life support apparatus is composed of: a garment for completely enclosing a wearer and constructed for preventing passage of gas from the environment surrounding the garment; a portable receptacle holding a quantity of an oxygen-containing fluid in liquid state, the fluid being in a breathable gaseous state when at standard temperature and pressure; a fluid flow member secured within the garment and coupled to the receptacle for conducting the fluid in liquid state from the receptacle to the interior of the garment; and a fluid flow control device connected for causing fluid to flow from the receptacle to the fluid flow member at a rate determined by the breathable air requirement of the wearer, wherein fluid in liquid state is conducted into the interior of the garment at a rate to be vaporized and heated to a breathable temperature by body heat produced by the wearer. 6 figs.

16 CFR 1120.3 - Products deemed to be substantial product hazards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... equivalent to sizes 2T to 16: (i) Garments in girls' size Large (L) and boys' size Large (L) are equivalent to girls' or boys' size 12, respectively. Garments in girls' and boys' sizes smaller than Large (L... range of 2T to 12. (ii) Garments in girls' size Extra-Large (XL) and boys' size Extra-Large (XL) are...

16 CFR § 1120.3 - Products deemed to be substantial product hazards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... equivalent to sizes 2T to 16: (i) Garments in girls' size Large (L) and boys' size Large (L) are equivalent to girls' or boys' size 12, respectively. Garments in girls' and boys' sizes smaller than Large (L... range of 2T to 12. (ii) Garments in girls' size Extra-Large (XL) and boys' size Extra-Large (XL) are...

16 CFR 1120.3 - Products deemed to be substantial product hazards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... equivalent to sizes 2T to 16: (i) Garments in girls' size Large (L) and boys' size Large (L) are equivalent to girls' or boys' size 12, respectively. Garments in girls' and boys' sizes smaller than Large (L... range of 2T to 12. (ii) Garments in girls' size Extra-Large (XL) and boys' size Extra-Large (XL) are...

Garment Counting in a Textile Warehouse by Means of a Laser Imaging System

PubMed Central

Martínez-Sala, Alejandro Santos; Sánchez-Aartnoutse, Juan Carlos; Egea-López, Esteban

2013-01-01

Textile logistic warehouses are highly automated mechanized places where control points are needed to count and validate the number of garments in each batch. This paper proposes and describes a low cost and small size automated system designed to count the number of garments by processing an image of the corresponding hanger hooks generated using an array of phototransistors sensors and a linear laser beam. The generated image is processed using computer vision techniques to infer the number of garment units. The system has been tested on two logistic warehouses with a mean error in the estimated number of hangers of 0.13%. PMID:23628760

Garment counting in a textile warehouse by means of a laser imaging system.

PubMed

Martínez-Sala, Alejandro Santos; Sánchez-Aartnoutse, Juan Carlos; Egea-López, Esteban

2013-04-29

Textile logistic warehouses are highly automated mechanized places where control points are needed to count and validate the number of garments in each batch. This paper proposes and describes a low cost and small size automated system designed to count the number of garments by processing an image of the corresponding hanger hooks generated using an array of phototransistors sensors and a linear laser beam. The generated image is processed using computer vision techniques to infer the number of garment units. The system has been tested on two logistic warehouses with a mean error in the estimated number of hangers of 0.13%.

Innovative, wearable snap connector technology for improved device networking in electronic garments

NASA Astrophysics Data System (ADS)

Kostrzewski, Andrew A.; Lee, Kang S.; Gans, Eric; Winterhalter, Carole A.; Jannson, Tomasz P.

2007-04-01

This paper discusses Physical Optics Corporation's (POC) wearable snap connector technology that provides for the transfer of data and power throughout an electronic garment (e-garment). These connectors resemble a standard garment button and can be mated blindly with only one hand. Fully compatible with military clothing, their application allows for the networking of multiple electronic devices and an intuitive method for adding/removing existing components from the system. The attached flexible cabling also permits the rugged snap connectors to be fed throughout the standard webbing found in military garments permitting placement in any location within the uniform. Variations of the snap electronics/geometry allow for integration with USB 2.0 devices, RF antennas, and are capable of transferring high bandwidth data streams such as the 221 Mbps required for VGA video. With the trend towards providing military officers with numerous electronic devices (i.e., heads up displays (HMD), GPS receiver, PDA, etc), POC's snap connector technology will greatly improve cable management resulting in a less cumbersome uniform. In addition, with electronic garments gaining widespread adoption in the commercial marketplace, POC's technology is finding applications in such areas as sporting good manufacturers and video game technology.

Confounding compression: the effects of posture, sizing and garment type on measured interface pressure in sports compression clothing.

PubMed

Brophy-Williams, Ned; Driller, Matthew William; Shing, Cecilia Mary; Fell, James William; Halson, Shona Leigh; Halson, Shona Louise

2015-01-01

The purpose of this investigation was to measure the interface pressure exerted by lower body sports compression garments, in order to assess the effect of garment type, size and posture in athletes. Twelve national-level boxers were fitted with sports compression garments (tights and leggings), each in three different sizes (undersized, recommended size and oversized). Interface pressure was assessed across six landmarks on the lower limb (ranging from medial malleolus to upper thigh) as athletes assumed sitting, standing and supine postures. Sports compression leggings exerted a significantly higher mean pressure than sports compression tights (P < 0.001). Oversized tights applied significantly less pressure than manufacturer-recommended size or undersized tights (P < 0.001), yet no significant differences were apparent between different-sized leggings. Standing posture resulted in significantly higher mean pressure application than a seated posture for both tights and leggings (P < 0.001 and P = 0.002, respectively). Pressure was different across landmarks, with analyses revealing a pressure profile that was neither strictly graduated nor progressive in nature. The pressure applied by sports compression garments is significantly affected by garment type, size and posture assumed by the wearer.

Personal cooling apparatus and method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Siman-Tov, Moshe; Crabtree, Jerry Allen

2001-01-01

A portable lightweight cooling apparatus for cooling a human body is disclosed, having a channeled sheet which absorbs sweat and/or evaporative liquid, a layer of highly conductive fibers adjacent the channeled sheet; and, an air-moving device for moving air through the channeled sheet, wherein the layer of fibers redistributes heat uniformly across the object being cooled, while the air moving within the channeled sheet evaporates sweat and/or other evaporative liquid, absorbs evaporated moisture and the uniformly distributed heat generated by the human body, and discharges them into the environment. Also disclosed is a method for removing heat generated by themore » human body, comprising the steps of providing a garment to be placed in thermal communication with the body; placing a layer of highly conductive fibers within the garment adjacent the body for uniformly distributing the heat generated by the body; attaching an air-moving device in communication with the garment for forcing air into the garment; removably positioning an exchangeable heat sink in communication with the air-moving device for cooling the air prior to the air entering the garment; and, equipping the garment with a channeled sheet in communication with the air-moving device so that air can be directed into the channeled sheet and adjacent the layer of fibers to expell heat and moisture from the body by the air being directed out of the channeled sheet and into the environment. The cooling system may be configured to operate in both sealed and unsealed garments.« less

Personal cooling apparatus and method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Siman-Tov, Moshe; Crabtree, Jerry Allen

A portable lightweight cooling apparatus for cooling a human body is disclosed, having a channeled sheet which absorbs sweat and/or evaporative liquid, a layer of highly conductive fibers adjacent the channeled sheet; and, an air-moving device for moving air through the channeled sheet, wherein the layer of fibers redistributes heat uniformly across the object being cooled, while the air moving within the channeled sheet evaporates sweat and/or other evaporative liquid, absorbs evaporated moisture and the uniformly distributed heat generated by the human body, and discharges them into the environment. Also disclosed is a method for removing heat generated by themore » human body, comprising the steps of providing a garment to be placed in thermal communication with the body; placing a layer of highly conductive fibers within the garment adjacent the body for uniformly distributing the heat generated by the body; attaching an air-moving device in communication with the garment for forcing air into the garment; removably positioning an exchangeable heat sink in communication with the air-moving device for cooling the air prior to the air entering the garment; and, equipping the garment with a channeled sheet in communication with the air-moving device so that air can be directed into the channeled sheet and adjacent the layer of fibers to expell heat and moisture from the body by the air being directed out of the channeled sheet and into the environment. The cooling system may be configured to operate in both sealed and unsealed garments.« less

Personal cooling apparatus and method

DOEpatents

Siman-Tov, Moshe; Crabtree, Jerry Allen

2001-01-01

A portable lightweight cooling apparatus for cooling a human body is disclosed, having a channeled sheet which absorbs sweat and/or evaporative liquid, a layer of highly conductive fibers adjacent the channeled sheet; and, an air-moving device for moving air through the channeled sheet, wherein the layer of fibers redistributes heat uniformly across the object being cooled, while the air moving within the channeled sheet evaporates sweat and/or other evaporative liquid, absorbs evaporated moisture and the uniformly distributed heat generated by the human body, and discharges them into the environment. Also disclosed is a method for removing heat generated by the human body, comprising the steps of providing a garment to be placed in thermal communication with the body; placing a layer of highly conductive fibers within the garment adjacent the body for uniformly distributing the heat generated by the body; attaching an air-moving device in communication with the garment for forcing air into the garment; removably positioning an exchangeable heat sink in communication with the air-moving device for cooling the air prior to the air entering the garment; and, equipping the garment with a channeled sheet in communication with the air-moving device so that air can be directed into the channeled sheet and adjacent the layer of fibers to expell heat and moisture from the body by the air being directed out of the channeled sheet and into the environment. The cooling system may be configured to operate in both sealed and unsealed garments.

The Garment Industry Development Corporation: A Case Study of a Sectoral Employment Development Approach. Sectoral Employment Development Learning Project Case Studies Series.

ERIC Educational Resources Information Center

Conway, Maureen

The Garment Industry Development Corporation (GIDC) was founded in 1984 by a 3-member partnership that included the local union, industry associations, and local government. GIDC's goal was to support New York City's garment industry, which had been steadily losing jobs. GIDC exhibits the following characteristics of sectoral initiatives: it…

Liquid Cooling Garment Technology Transfer: A Biomedical Case Study

NASA Technical Reports Server (NTRS)

Ku, Yu-Tsuan E.; Montgomery, Leslie D.; Lomax, W. Curtis; Webbon, Bruce W.

1995-01-01

Liquid cooling garments (LCGs) are routinely used to remove the body heat generated in a space-suit during extravehicular activity (EVA). Garments based upon LCG design have been used in various biomedical situations. The objectives of this investigation is to describe one recent LCG application to provide relief of the pain associated with peripheral neuritis and to report the physiologic changes responsible for this relief.

Homeworking: Home Office or Home Sweatshop? Report on Current Conditions of Homeworkers in Toronto's Garment Industry. NALL Working Paper.

ERIC Educational Resources Information Center

Ng, Roxana; Wong, Renita Yuk-Lin; Choi, Angela

The current conditions of home workers in the garment industry in Toronto, Canada, were examined through in-depth telephone interviews with 30 Chinese-speaking immigrant women who were employed as home workers in 1999. The paper dicusses the formal training and informal learning experiences of immigrant woman who are garment workers. A comparison…

Testing of Disposable Protective Garments Against Isocyanate Permeation From Spray Polyurethane Foam Insulation.

PubMed

Mellette, Michael P; Bello, Dhimiter; Xue, Yalong; Yost, Michael; Bello, Anila; Woskie, Susan

2018-05-12

Diisocyanates (isocyanates), including methylene diphenyl diisocyanate (MDI), are the primary reactive components of spray polyurethane foam (SPF) insulation. They are potent immune sensitizers and a leading cause of occupational asthma. Skin exposure to isocyanates may lead to both irritant and allergic contact dermatitis and possibly contribute to systemic sensitization. More than sufficient evidence exists to justify the use of protective garments to minimize skin contact with aerosolized and raw isocyanate containing materials during SPF applications. Studies evaluating the permeation of protective garments following exposure to SPF insulation do not currently exist. To conduct permeation testing under controlled conditions to assess the effectiveness of common protective gloves and coveralls during SPF applications using realistic SPF product formulations. Five common disposable garment materials [disposable latex gloves (0.07 mm thickness), nitrile gloves (0.07 mm), vinyl gloves (0.07 mm), polypropylene coveralls (0.13 mm) and Tyvek coveralls (0.13 mm)] were selected for testing. These materials were cut into small pieces and assembled into a permeation test cell system and coated with a two-part slow-rise spray polyurethane foam insulation. Glass fiber filters (GFF) pretreated with 1-(9-anthracenylmethyl)piperazine) (MAP) were used underneath the garment to collect permeating isocyanates. GFF filters were collected at predetermined test intervals between 0.75 and 20.00 min and subsequently analyzed using liquid chromatography-tandem mass spectrometry. For each garment material, we assessed (i) the cumulative concentration of total isocyanate, including phenyl isocyanate and three MDI isomers, that effectively permeated the material over the test time; (ii) estimated breakthrough detection time, average permeation rate, and standardized breakthrough time; from which (iii) recommendations were developed for the use of similar protective garments following contamination by two-component spray polyurethane foam systems and the limitations of such protective garments were identified. Each type of protective garment material demonstrated an average permeation rate well below the ASTM method F-739 standardized breakthrough rate threshold of 100.0 ng/cm2 min-1. Disposable latex gloves displayed the greatest total isocyanate permeation rate (4.11 ng/cm2 min-1), followed by the vinyl and nitrile gloves, respectively. The Tyvek coverall demonstrated a greater average rate of isocyanate permeation than the polypropylene coveralls. Typical isocyanate loading was in the range of 900 to 15,000 ng MDI/cm2. Permeation test data collected during this study indicated that each type of protective garment evaluated, provided a considerable level of protection (i.e. 10-110-fold reduction from the level of direct exposure) against the isocyanate component of the SPF insulation mixture. Nitrile gloves and polypropylene coveralls demonstrated the lowest rate of permeation and the lowest cumulative permeation of total isocyanate for each garment type.

Design and Testing of Improved Spacesuit Shielding Components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ware, J.; Ferl, J.; Wilson, J.W.

2002-05-08

In prior studies of the current Shuttle Spacesuit (SSA), where basic fabric lay-ups were tested for shielding capabilities, it was found that the fabric portions of the suit give far less protection than previously estimated due to porosity and non-uniformity of fabric and LCVG components. In addition, overall material transmission properties were less than optimum. A number of alternate approaches are being tested to provide more uniform coverage and to use more efficient materials. We will discuss in this paper, recent testing of new material lay-ups/configurations for possible use in future spacesuit designs.

Cotton Dust Exposure and Resulting Respiratory Disorders Among Home-Based Garment Workers.

PubMed

Silpasuwan, Pimpan; Prayomyong, Somchit; Sujitrat, Dusit; Suwan-Ampai, Plernpit

2016-03-01

Cotton dust exposures and resulting respiratory disorders among Thai home-based garment workers in Bangkok were explored. Structured interviews focused on occupational health assessments of respiratory disorders; workflow process observations, lung function screening tests, and garment dust density assessments were used to gather data. Results revealed that garment workers in this study had worked in home-based tailoring an average of 14.88 years; 88.5% reported average health status, only 2.6% currently smoked cigarettes, and 8.6% had impaired lung function. The prevalence of respiratory disorders in this occupational group was 25%. Significant respiratory tract signs and symptoms were associated with lung function capacity (odds ratio [OR] = 52.15, 95% confidence interval [CI] = [6.49, 419.60]). Long work hours and few preventive behaviors were significantly associated with respiratory disorders (OR = 2.89 and OR = 10.183, respectively). Improving working conditions at home and minimizing fabric dust exposure among garment workers are recommended. © 2015 The Author(s).

Lox breathing system with gas permeable-liquid impermeable heat exchange and delivery hose

DOEpatents

Hall, Mark N.

1996-01-01

Life support apparatus composed of: a garment (2): for completely enclosing a wearer and constructed for preventing passage of gas from the environment surrounding the garment (2); a portable receptacle (6) holding a quantity of an oxygen-containing fluid in liquid state, the fluid being in a breathable gaseous; state when at standard temperature and pressure; a fluid flow member (16) secured within the garment (2) and coupled to the receptacle (6) for conducting the fluid in liquid state from the receptacle (6) to the interior of the garment (2); and a fluid flow control device (14) connected for causing fluid to flow from the receptacle (6) to the fluid flow member (16) at a rate determined by the breathable air requirement of the wearer, wherein fluid in liquid state is conducted into the interior of the garment (2) at a rate to be vaporized and heated to a breathable temperature by body heat produced by the wearer.

Garment Selection for Cleanrooms and Controlled Environments for Spacecraft

DTIC Science & Technology

1991-04-01

visually undetectable, making it diffi- cult for a worker to select a treated garment. The optimal solution has been to weave a grid of synthetic coated ...make the base fabric static-dis- sipative must be selected carefully. Nylon- coated conductive yarns are readily subject to acid attack, while...Cations (+ ) which must be eliminated from garments include sodium, potassium, lithi- um, aluminum, boron , and arsenic. The standard mtwhod for

Coalition Warfare Program Tactile Situation Awareness System for Aviation Applications: System Development

DTIC Science & Technology

2014-01-01

Advancement, specifically Mr. Ed McDaniel and Mr. Dan Seifert, who managed and pushed forward the Small Business Innovative Research (SBIR) process ...achievements. TSAS is a garment containing vibrotactile stimulators (called tactors) partially covering the torso. The garment provides aircraft flight...awareness. Working in conjunction with two SBIR companies, the recent CWP TSAS effort advanced the state of tactile cueing and delivered TSAS garments

Allergic contact dermatitis associated with reactive dyes in a dark garment: a case report.

PubMed

Moreau, Linda; Goossens, An

2005-09-01

In this study, we present a case of a patient who has not been occupationally exposed to reactive dyes, but did present with a dermatitis from wearing a dark cotton garment. The patient experienced reactivation of his dermatitis when rewearing a new unwashed dark T-shirt made of 100% cotton (in fact, the patient reported that it had to be washed at least 3 times before the skin reaction disappeared). He presented positive patch tests to 6 reactive dyes from Chemotechnique textile series. The clothing could not be proved as the true cause of the dermatitis, but resolution occurred upon removal of the suspected garment. This suggests that contact allergy to the reactive dyes (he did not react to any other dyes and his garment was a natural fabric) was likely responsible. With this report, we would like to emphasize that reactive dyes, as a class, should be considered as potential allergens, both occupationally and from non-occupational exposure such as garments. If garments containing reactive dyes are not properly rinsed in the manufacturing process, we believe that excess of dye can be retained that may cause allergic contact dermatitis (ACD). As the reactive dyes and their hydrolysis products are very water-soluble, they can be easily washed off to prevent ACD.

Comparison of three distinct surgical clothing systems for protection from air-borne bacteria: A prospective observational study

PubMed Central

2012-01-01

Background To prevent surgical site infection it is desirable to keep bacterial counts low in the operating room air during orthopaedic surgery, especially prosthetic surgery. As the air-borne bacteria are mainly derived from the skin flora of the personnel present in the operating room a reduction could be achieved by using a clothing system for staff made from a material fulfilling the requirements in the standard EN 13795. The aim of this study was to compare the protective capacity between three clothing systems made of different materials – one mixed cotton/polyester and two polyesters - which all had passed the tests according to EN 13795. Methods Measuring of CFU/m3 air was performed during 21 orthopaedic procedures performed in four operating rooms with turbulent, mixing ventilation with air flows of 755 – 1,050 L/s. All staff in the operating room wore clothes made from the same material during each surgical procedure. Results The source strength (mean value of CFU emitted from one person per second) calculated for the three garments were 4.1, 2.4 and 0.6 respectively. In an operating room with an air flow of 755 L/s both clothing systems made of polyester reduced the amount of CFU/m3 significantly compared to the clothing system made from mixed material. In an operating room with air intake of 1,050 L/s a significant reduction was only achieved with the polyester that had the lowest source strength. Conclusions Polyester has a better protective capacity than cotton/polyester. There is need for more discriminating tests of the protective efficacy of textile materials intended to use for operating garment. PMID:23068884

Market study: Biological isolation garment

NASA Technical Reports Server (NTRS)

1975-01-01

The biological isolation garment was originally designed for Apollo astronauts to wear upon their return to earth from the moon to avoid the possibility of their contaminating the environment. The concept has been adapted for medical use to protect certain patients from environmental contamination and the risk of infection. The nature and size of the anticipated market are examined with certain findings and conclusions relative to clinical acceptability and potential commercial viability of the biological isolation garment.

Cleanroom Garment Silicone Contamination

NASA Technical Reports Server (NTRS)

Geer, Wayne; Lepage, Colette

2006-01-01

The slide presentation reviews actions taken at Goddard Space Flight Center (GSFC) to eliminate contamination by silicone in clean rooms. Background information includes facilities and hardware affected by silicon contamination, a discussion of the negative aspects of silicone contamination, clean room garments, and how the problem was identified at GSFC. Actions taken by the GSFC Contamination Engineering Group and lessons learned are detailed. Results include: awareness of the silicone issue in laundry, increase in infrastructure and support of the testing lab, establishment of protocols for garment verification, closer relationship established with laundry and converter, specifications for laundry services and garments were strengthened, all consumables are tested before use in clean rooms, and established procedures were used to identify and treat silicone found on face masks.

Pilot Field Test: Use of a Compression Garment During a Stand Test After Long-Duration Space Flight

NASA Technical Reports Server (NTRS)

Laurie, S. S.; Stenger, M. B.; Phillips, T. R.; Lee, S. M. C.; Cerisano, J.; Kofman, I.; Reschke, M.

2016-01-01

Orthostatic intolerance (OI) is a concern for astronauts returning from long-duration space flight. One countermeasure that has been used to protect against OI after short-duration bed rest and space flight is the use of lower body and abdominal compression garments. However, since the end of the Space Shuttle era we have not been able to test crewmembers during the first 24 hours after landing on Earth. NASA's Pilot Field Test provided us the opportunity to test cardiovascular responses of crewmembers wearing the Russian Kentavr compression garment during a stand test at multiple time points throughout the first 24 hours after landing. HYPOTHESIS We hypothesized that the Kentavr compression garment would prevent an increase in heart rate (HR) >15 bpm during a 3.5-min stand test. METHODS: The Pilot Field Test was conducted up to 3 times during the first 24 hours after crewmembers returned to Earth: (1) either in a tent adjacent to the Soyuz landing site in Kazakhstan (approx.1 hr) or after transportation to the Karaganda airport (approx. 4 hr); (2) during a refueling stop in Scotland (approx.12 hr); and (3) upon return to NASA Johnson Space Center (JSC) (approx.24 hr). We measured HR and arterial pressure (finger photoplethysmography) for 2 min while the crewmember was prone and throughout 3.5 min of quiet standing. Eleven crewmembers consented to participate; however, 2 felt too ill to start the test and 1 stopped 30 sec into the stand portion of the test. Of the remaining 8 crewmembers, 2 did not wear the Russian Kentavr compression garment. Because of inclement weather at the landing site, 5 crewmembers were flown by helicopter to the Karaganda airport before initial testing and received intravenous saline before completing the stand test. One of these crewmembers wore only the portion of the Russian Kentavr compression garment that covered the lower leg and thus lacked thigh and abdominal compression. All crewmembers continued wearing the Russian Kentavr compression garment during the second testing session in Scotland, but none wore it during testing at JSC. RESULTS: The mean Delta HR from the supine to standing position in the 8 crewmembers measured pre-flight or 60 days after return from long-duration space flight was 9.8 bpm. During the first few hours after landing from long-duration space flight, the mean Delta HR of the 6 crewmembers who wore the Russian Kentavr compression garment in Kazakhstan or Karaganda was +14 bpm and the change in mean arterial pressure (Delta MAP) was +0.8 mmHg, while the 2 crewmembers who did not wear the Russian Kentavr compression garment had a Delta HR of +38 bpm and a Delta MAP of +1.1 mmHg. In Scotland, 4 crewmembers wore the Russian Kentavr compression garment and had a Delta HR of +7.4 bpm while the 3 crewmembers who did not wear it had a Delta HR of +25.0 bpm. Seven crewmembers were tested upon return to JSC approx. 24 hr after landing, but none wore the Russian Kentavr compression garment and their Delta HR was 16.0 bpm. CONCLUSIONS: These are the first stand-test data to be collected from long-duration crewmembers during the first 24 hr of re-adaptation to gravity on Earth. The Delta HR measured in crewmembers who completed the stand-test while wearing Kentavr within the first approx.4 hours after returning to Earth was only slightly elevated from pre-flight Delta HR, while the few subjects who did not wear the Russian Kentavr compression garment had a much larger increase in HR in order to maintain arterial pressure throughout 3.5-min of standing. These data demonstrate the effectiveness of a compression garment in preventing large increases in HR during a 3.5 min stand test after long-duration space flight. However, the fact that three crewmembers were too ill to complete the test or was not able to complete 3.5 min of standing despite wearing the Russian Kentavr compression garment indicates that wearing a compression garment does not resolve all problems crewmembers face during the period of re-adaptation immediately after return to Earth's gravity.

Comparison of three types of full‐body compression garments on throwing and repeat‐sprint performance in cricket players

PubMed Central

Duffield, Rob; Portus, Marc

2007-01-01

Objective To compare the effects of three types of full‐body compression garments (Skins, Adidas and Under Armour) on repeat‐sprint and throwing performance in cricket players. Methods Following familiarisation, 10 male cricket players performed four randomised exercise sessions (3 garments and a control). Each session involved a 30 min repeat‐sprint exercise protocol comprising 20 m sprints every minute, separated by submaximal exercise. Throwing tests included a pre‐exercise and a postexercise maximal distance test and accuracy throwing tests. During each session, measures of heart rate, skin temperature, change in body mass, rate of perceived exertion and perceived muscle soreness were recorded. Capillary blood samples were analysed before and after exercise for lactate, pH, O2 saturation and O2 partial pressure, and 24 h after exercise for creatine kinase (CK). Ratings of perceived muscle soreness were also obtained 24 h after exercise. Results No significant differences (p>0.05) were evident in repeat‐sprint performance (10 m, 20 m time or total submaximal distance covered) or throwing performance (maximum distance or accuracy). No significant differences (p>0.05) were observed in heart rate, body mass change or blood measures during exercise. Significant differences (p<0.05) were observed by way of higher mean skin temperature, lower 24 h postexercise CK values and lower 24 h postexercise ratings of muscle soreness when wearing compression garments. Analysis between respective brands of compression garments revealed no statistical differences (p>0.05). Conclusions No benefit was noted when wearing compression garments for repeat‐sprint or throwing performance; however, the use of the garments as a recovery tool, when worn after exercise, may be beneficial to reduce postexercise trauma and perceived muscle soreness. PMID:17341589

Comparison of three types of full-body compression garments on throwing and repeat-sprint performance in cricket players.

PubMed

Duffield, Rob; Portus, Marc

2007-07-01

To compare the effects of three types of full-body compression garments (Skins, Adidas and Under Armour) on repeat-sprint and throwing performance in cricket players. Following familiarisation, 10 male cricket players performed four randomised exercise sessions (3 garments and a control). Each session involved a 30 min repeat-sprint exercise protocol comprising 20 m sprints every minute, separated by submaximal exercise. Throwing tests included a pre-exercise and a postexercise maximal distance test and accuracy throwing tests. During each session, measures of heart rate, skin temperature, change in body mass, rate of perceived exertion and perceived muscle soreness were recorded. Capillary blood samples were analysed before and after exercise for lactate, pH, O(2) saturation and O(2) partial pressure, and 24 h after exercise for creatine kinase (CK). Ratings of perceived muscle soreness were also obtained 24 h after exercise. No significant differences (p>0.05) were evident in repeat-sprint performance (10 m, 20 m time or total submaximal distance covered) or throwing performance (maximum distance or accuracy). No significant differences (p>0.05) were observed in heart rate, body mass change or blood measures during exercise. Significant differences (p<0.05) were observed by way of higher mean skin temperature, lower 24 h postexercise CK values and lower 24 h postexercise ratings of muscle soreness when wearing compression garments. Analysis between respective brands of compression garments revealed no statistical differences (p>0.05). No benefit was noted when wearing compression garments for repeat-sprint or throwing performance; however, the use of the garments as a recovery tool, when worn after exercise, may be beneficial to reduce postexercise trauma and perceived muscle soreness.

Exposure of women to trace elements through the skin by direct contact with underwear clothing.

PubMed

Nguyen, Thao; Saleh, Mahmoud A

2017-01-02

Heavy metals pose a potential danger to human health when present in textile materials. In the present study, inductive coupled plasma mass spectrometry (ICPMS) was used to determine the concentrations and the identity of extractable inorganic elements from different brands of women undergarments. A total of 120 samples consisting of 63 cottons, 44 nylons and 13 polyesters manufactured in 14 different countries having different colors were analyzed for their extractable metals contents. Elements analyzed were Ag, Al, As, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Li, Mg, Mn, Na, Ni, Pb, Sb, Se, Sr, Ti, V and Zn. Cotton undergarments were rich in Al, Fe and Zn, nylon undergarments had high levels of Cr, Cu and Al, while polyester fabrics contained higher levels of Ni and Fe compared to cotton or nylon. With respect to manufacturing countries, China, Egypt and India showed the highest concentrations of metals in all fabrics. With respect to the color, black garments were characteristic by high concentration of Fe, blue colors with Cu, brown garments with Fe and Cu, green garments with Cu and Fe, pink garments with Al, purple garments with Al and Cu and red garments with Cr, Zn and Al. The consumer should be made aware of the potential dangers of these metals in their clothing.

The Effects of Compression-Garment Pressure on Recovery After Strenuous Exercise.

PubMed

Hill, Jessica; Howatson, Glyn; van Someren, Ken; Gaze, David; Legg, Hayley; Lineham, Jack; Pedlar, Charles

2017-09-01

Compression garments are frequently used to facilitate recovery from strenuous exercise. To identify the effects of 2 different grades of compression garment on recovery indices after strenuous exercise. Forty-five recreationally active participants (n = 26 male and n = 19 female) completed an eccentric-exercise protocol consisting of 100 drop jumps, after which they were matched for body mass and randomly but equally assigned to a high-compression pressure (HI) group, a low-compression pressure (LOW) group, or a sham ultrasound group (SHAM). Participants in the HI and LOW groups wore the garments for 72 h postexercise; participants in the SHAM group received a single treatment of 10-min sham ultrasound. Measures of perceived muscle soreness, maximal voluntary contraction (MVC), countermovement-jump height (CMJ), creatine kinase (CK), C-reactive protein (CRP), and myoglobin (Mb) were assessed before the exercise protocol and again at 1, 24, 48, and 72 h postexercise. Data were analyzed using a repeated-measures ANOVA. Recovery of MVC and CMJ was significantly improved with the HI compression garment (P < .05). A significant time-by-treatment interaction was also observed for jump height at 24 h postexercise (P < .05). No significant differences were observed for parameters of soreness and plasma CK, CRP, and Mb. The pressures exerted by a compression garment affect recovery after exercise-induced muscle damage, with higher pressure improving recovery of muscle function.

The gendered workplaces of women garment workers in Istanbul.

PubMed

Can, Başak

2017-10-01

Drawing on 20 semi-structured interviews with women garment workers in a low-income neighbourhood of Istanbul, and observations in the ateliers where they worked, this article examines their work experiences in the gendered and sexualised work atmosphere of garment workshops. There are three interrelated levels upon which the gender-related issues emerge in women garment workers' stories. The first set of discourses portrays young female garment workers in highly sexualised terms, and the second concerns the use of kinship vocabulary and avoidance of impersonal work relationships. That is, women workers' experiences in capitalist production sites were trivialised and regulated through the sexualisation of their bodies and the deployment of kinship idioms while addressing their role at the workplace. The third level analyses women's submissive, subversive or contradictory responses to these gendered disciplinary techniques and representations, i.e. the construction of their subjectivities. These three levels point to two things: first, cultural presumptions about marriage, women's sexuality and reproductive cycles are materialised at the workplace. Second, gendered instantiations of these presumptions in a specific work environment are both informed by their familial roles (such as daughter, wife, mother, widowed) and inform their future reproductive preferences (whether they marry, have a child, get a divorce, etc.). This article shows how the ways in which women's difference is construed and acted upon in the garment industry are inseparable from women's reproductive decisions.

Pressure mapping and performance of the compression bandage/garment for venous leg ulcer treatment.

PubMed

Ghosh, S; Mukhopadhyay, A; Sikka, M; Nagla, K S

2008-08-01

A study has been conducted on the commercially available compression bandages as regards their performance with time. Pressure mapping of these bandages has been done using a fabricated pressure-measuring device on a mannequin leg to see the effect on pressure due to creep, fabric friction and angle of bandaging. The results show that the creep behavior, frictional behavior and the angle of bandaging have a significant effect on the pressure profile generated by the bandages during application. The regression analysis shows that the surface friction restricts the slippage in a multilayer system. Also the diameters of the limb and the amount of stretch given to the bandage during application have definite impact on the bandage pressure. In case of compression garments, washing improves the pressure generated but not to the extent of the pressure of a virgin garment. Comparing the two compression materials i.e. bandage and garment, it is found that the presence of higher percentage of elastomeric material and a highly close construction in case of garment provides better holding power and a more homogeneous pressure distribution.

Smart garments for emergency operators: the ProeTEX project.

PubMed

Curone, Davide; Secco, Emanuele Lindo; Tognetti, Alessandro; Loriga, Giannicola; Dudnik, Gabriela; Risatti, Michele; Whyte, Rhys; Bonfiglio, Annalisa; Magenes, Giovanni

2010-05-01

Financed by the European Commission, a consortium of 23 European partners, consisting of universities, research institutions, industries, and organizations operating in the field of emergency management, is developing a new generation of "smart" garments for emergency-disaster personnel. Garments integrate newly developed wearable and textile solutions, such as commercial portable sensors and devices, in order to continuously monitor risks endangering rescuers' lives. The system enables detection of health-state parameters of the users (heart rate, breathing rate, body temperature, blood oxygen saturation, position, activity, and posture) and environmental variables (external temperature, presence of toxic gases, and heat flux passing through the garments), to process data and remotely transmit useful information to the operation manager. The European-integrated project, called ProeTEX (Protection e-Textiles: Micro-Nano-Structured fiber systems for Emergency-Disaster Wear) started on February, 2006 and will end on July, 2010. During this 4.5 years period, three subsequent generations of sensorized garments are being released. This paper proposes an overview of the project and gives a description of the second-generation prototypes, delivered at the end of 2008.

A study of the thermoregulatory characteristics of a liquid-cooled garment with automatic temperature control based on sweat rate: Experimental investigation and biothermal man-model development

NASA Technical Reports Server (NTRS)

Chambers, A. B.; Blackaby, J. R.; Miles, J. B.

1973-01-01

Experimental results for three subjects walking on a treadmill at exercise rates of up to 590 watts showed that thermal comfort could be maintained in a liquid cooled garment by using an automatic temperature controller based on sweat rate. The addition of head- and neck-cooling to an Apollo type liquid cooled garment increased its effectiveness and resulted in greater subjective comfort. The biothermal model of man developed in the second portion of the study utilized heat rates and exchange coefficients based on the experimental data, and included the cooling provisions of a liquid-cooled garment with automatic temperature control based on sweat rate. Simulation results were good approximations of the experimental results.

Design of a smart ECG garment based on conductive textile electrode and flexible printed circuit board.

PubMed

Cai, Zhipeng; Luo, Kan; Liu, Chengyu; Li, Jianqing

2017-08-09

A smart electrocardiogram (ECG) garment system was designed for continuous, non-invasive and comfortable ECG monitoring, which mainly consists of four components: Conductive textile electrode, garment, flexible printed circuit board (FPCB)-based ECG processing module and android application program. Conductive textile electrode and FPCB-based ECG processing module (6.8 g, 55 mm × 53 mm × 5 mm) are identified as two key techniques to improve the system's comfort and flexibility. Preliminary experimental results verified that the textile electrodes with circle shape, 40 mm size in diameter, and 5 mm thickness sponge are best suited for the long-term ECG monitoring application. The tests on the whole system confirmed that the designed smart garment can obtain long-term ECG recordings with high signal quality.

Smart Rehabilitation Garment for posture monitoring.

PubMed

Wang, Q; Chen, W; Timmermans, A A A; Karachristos, C; Martens, J B; Markopoulos, P

2015-08-01

Posture monitoring and correction technologies can support prevention and treatment of spinal pain or can help detect and avoid compensatory movements during the neurological rehabilitation of upper extremities, which can be very important to ensure their effectiveness. We describe the design and development of Smart Rehabilitation Garment (SRG) a wearable system designed to support posture correction. The SRG combines a number of inertial measurement units (IMUs), controlled by an Arduino processor. It provides feedback with vibration on the garment, audible alarm signals and visual instruction through a Bluetooth connected smartphone. We discuss the placement of sensing modules, the garment design, the feedback design and the integration of smart textiles and wearable electronics which aimed at achieving wearability and ease of use. We report on the system's accuracy as compared to optical tracker method.

Summary of Laboratory and Field Comfort Studies on Candidate Fabrics for a Year-Round Uniform

DTIC Science & Technology

1986-06-01

differences were particularly sharp under wearing conditions involving mild to heavy sweating at the skin- garment interface. 5 The evaluation of comfort using...34 would be inter- preted as meaning that the garment was "mildly scratchy". If no comment was made by the wearer, a rating of 5, "totally comfortable...25 women used in this study had no difficulty in detecting these differences even though the garments were presented randomly without identifying

Article comprising a garment or other textile structure for use in controlling body temperature

DOEpatents

Butzer, Melissa J.

2000-01-01

There is disclosed an article for use in cooling body temperature which comprises a garment having a coat and pant, with each having a body section adapted to receive a portion of the torso of the wearer and extensions from the body section to receive the wearer's limbs. The garment includes a system for circulating temperature controlling fluid from a suitable source through patches removably received in pockets in each of body section and extensions.

Automatic control of human thermal comfort with a liquid-cooled garment

NASA Technical Reports Server (NTRS)

Kuznetz, L. H.

1977-01-01

Water cooling in a liquid-cooled garment is used to maintain the thermal comfort of crewmembers during extravehicular activity. The feasibility of a simple control that will operate automatically to maintain the thermal comfort is established. Data on three test subjects are included to support the conclusion that heat balance can be maintained well within allowable medical limits. The controller concept was also successfully demonstrated for ground-based applications and shows potential for any tasks involving the use of liquid-cooled garments.

Compression Stockings May Ameliorate Orthostatic Intolerance in Astronauts After Short-Duration Space Flight

NASA Technical Reports Server (NTRS)

Platts, Steven H.; Lee, Stuart M. C.; Westby, Christian M.; Ribeiro, L. Christine; Stenger, Michael B.

2011-01-01

Orthostatic intolerance following spaceflight has been observed since the early days of manned spaceflight, and no countermeasure has been 100% effective. During re-entry NASA astronauts currently wear an inflatable anti-gravity suit (AGS) which compresses the legs and abdomen, but this device is uncomfortable and loses effectiveness upon egress from the Space Shuttle. We previously reported that foot-to-thigh, gradient compression stockings were comfortable and effective during standing after Shuttle missions. More recently we showed in a ground-based model of spaceflight that the addition of splanchnic compression to the foot-to-thigh compression stockings, creating foot-to-breast high compression, improved orthostatic tolerance in hypovolemic subjects to a level similar to the AGS. Purpose: To evaluate a new three-piece, foot-to-breast high gradient compression garment as a countermeasure to post-spaceflight orthostatic intolerance. Methods: Fourteen astronauts completed this experiment (7 control, 7 treatment) following Space Shuttle missions lasting 12-16 days. Treatment subjects were custom-fitted for a three-piece, foot-to-breast high compression garment consisting of shorts and foot-to-thigh stockings. The garments were constructed to provide 55 mmHg compression at the ankle and decreased gradually to 15 mmHg over the abdomen. Orthostatic testing occurred 30 days before flight (without garments) and 2 hours after flight (with garments for treatment group only) on landing day. Blood pressure (BP) and heart rate (HR) were acquired for 2 minutes while the subject lay prone and then for 3.5 minutes after the subject stood. Data are reported as mean +/- SE. Results: The compression garment successfully prevented the tachycardia and hypotension typically seen post-spaceflight. On landing day, treatment subjects had a smaller change in HR (11+/-1 vs. 21+/-4 beats/min, p< or =0.05) and no decrease in systolic BP (2+/-4 vs. -9+/-2 mmHg, p< or =0.05). Garments also received good comfort ratings and were relatively easy to don. Conclusion: In this small group of astronauts, foot-to-breast high gradient compression garments seem to have prevented these negative effects of spaceflight on the cardiovascular responses to standing.

Complexity of Sizing for Space Suit Applications

NASA Technical Reports Server (NTRS)

Rajulu, Sudhakar; Benson, Elizabeth

2009-01-01

The `fit? of a garment is often considered to be a subjective measure of garment quality. However, some experts attest that a complaint of poor garment fit is a symptom of inadequate or excessive ease, the space between the garment and the wearer. Fit has traditionally been hard to quantify, and space suits are an extreme example, where fit is difficult to measure but crucial for safety and operability. A proper space suit fit is particularly challenging because of NASA?s need to fit an incredibly diverse population (males and females from the 1st to 99th percentile) while developing a minimum number of space suit sizes. Because so few sizes are available, the available space suits must be optimized so that each fits a large segment of the population without compromising the fit of any one wearer.

Factors associated with knowledge about breastfeeding among female garment workers in Dhaka city.

PubMed

Afrose, Lucen; Banu, Bilkis; Ahmed, Kazi R; Khanom, Khurshida

2012-01-01

Knowledge about breastfeeding among women is very important for healthy children. The present study aims to determine the level of knowledge and factors associated with knowledge on breastfeeding among female garment workers in a selected garment factory in Dhaka city. A cross-sectional study was conducted among 200 female garment workers in the reproductive age group (15-49 years). Data were collected through a pre-tested questionnaire using the face-to-face interview method. Bivariate and multivariate analysis was done to determine the association between sociodemographic variables and knowledge on breastfeeding. The study showed that, overall the level of knowledge regarding breastfeeding is very poor (88%) among the study subjects. Most of the respondents have very poor knowledge regarding advantages of exclusive breastfeeding (89%) and breastfeeding (100%). In contrast, a majority have good knowledge on duration of exclusive breastfeeding (74%) and breastfeeding (66%). No significant association was found between the knowledge score of breastfeeding with remaining socio-demographic variables like age, marital status, family income and expenditure. Education is significantly (p<0.001) associated with a higher total knowledge score of breastfeeding. Women with secondary level of education had a significantly higher (p<0.001) level of total knowledge score than other categories (illiterate, primary and higher secondary) of education. A large proportion of female garment workers had inadequate knowledge regarding breastfeeding. It is also important that health education on breastfeeding is urgently provided to the female garments workers of Bangladesh.

A heat transfer model for incorporating carbon foam fabrics in firefighter's garment

NASA Astrophysics Data System (ADS)

Elgafy, Ahmed; Mishra, Sarthak

2014-04-01

In the present work, a numerical study was performed to predict and investigate the performance of a thermal protection system for firefighter's garment consisting of carbon foam fabric in both the outer shell and the thermal liner elements. Several types of carbon foam with different thermal conductivity, porosity, and density were introduced to conduct a parametric study. Additionally, the thickness of the introduced carbon foam fabrics was varied to acquire optimum design. Simulation was conducted for a square planar 2D geometry of the clothing comprising of different fabric layers and a double precision pressure-based implicit solver, under transient state condition was used. The new anticipated thermal protection system was tested under harsh thermal environmental conditions that firefighters are exposed to. The parametric study showed that employing carbon foam fabric with one set of designed parameters, weight reduction of 33 % in the outer shell, 56 % in the thermal liner and a temperature reduction of 2 % at the inner edge of the garment was achieved when compared to the traditional firefighter garment model used by Song et al. (Int J Occup Saf Ergon 14:89-106, 2008). Also, carbon foam fabric with another set of designed parameters resulted in a weight reduction of 25 % in the outer shell, 28 % in the thermal liner and a temperature reduction of 6 % at the inner edge of the garment. As a result, carbon foam fabrics make the firefighter's garment more protective, durable, and lighter in weight.

Electrostimulation's enhancement of recovery during a rugby preseason.

PubMed

Beaven, C Martyn; Cook, Christian; Gray, David; Downes, Paul; Murphy, Ian; Drawer, Scott; Ingram, John R; Kilduff, Liam P; Gill, Nicholas

2013-01-01

Rugby preseason training involves high-volume strength and conditioning training, necessitating effective management of the recovery-stress state to avoid overtraining and maximize adaptive gains. Compression garments and an electrostimulation device have been proposed to improve recovery by increasing venous blood flow. These devices were assessed using salivary testosterone and cortisol, plasma creatine kinase, and player questionnaires to determine sleep quality, energy level, mood, and enthusiasm. Twenty-five professional rugby players were assigned to 1 of 2 treatments (compression garment or a concurrent combination of electrostimulation and compression) in a crossover design over 2 × 2-wk training blocks. Substantial benefits were observed in self-assessed energy levels (effect size [ES] 0.86), and enthusiasm (ES 0.80) as a result of the combined treatment when compared with compression-garment use. The combination treatment had no discernable effect on salivary hormones, with no treatment effect observed. The electrostimulation device did tend to accelerate the return of creatine kinase to baseline levels after 2 preseason rugby games when compared with the compression-garment intervention (ES 0.61; P = .08). Electrostimulation elicited psychometric and physiological benefits reflective of an improved recovery-stress state in professional male rugby players when combined with a lower-body compression garment.

The experience of scar management for adults with burns: An interpretative phenomenological analysis.

PubMed

Martin, C; Bonas, S; Shepherd, L; Hedges, E

2016-09-01

Burns can have both physical and psychological effects on individuals. Pressure garments and silicone gels are used to improve the aesthetic appearance and functions of the skin, but these treatments have been associated with various physical, emotional, sexual and social difficulties. Interpretative phenomenological analysis (IPA) was used to explore participants' experiences of scar management. IPA examines individual experiences before comparing results across cases, and is suited to capture the different ways in which individuals experience a phenomena as well as cautiously looking at patterns across cases. Eight burn patients who had experienced scar management, including pressure garments, were interviewed. Two superordinate themes were identified: Assimilation of Pressure Garment Identity, and Psychosocial Functions of the Pressure Garments. The findings offered insight into the positive and negative experiences of scar management, describing the diverse personal and social functions of the pressure garments and how they became integrated into participants' identities. By understanding the individual nature of these experiences, healthcare professionals can enhance support around these issues and potentially aid adherence to treatment. Further research with different demographic groups as well as for other burn treatments would be useful to develop and contextualise these findings. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

Thermal conductance of space suit insulations, thermal micrometeroid garments, and other insulations

NASA Technical Reports Server (NTRS)

Richardson, D. L.; Stevens, J. M.

1976-01-01

The thermal protection capabilities of development and operational thermal micrometeroid garments and other insulations were evaluated. The relationship among sample thermal conductance, surface temperature, and compressive loads was empirically defined.

Thermal Manikin Evaluation of Passive and Active Cooling Garments to Improve Comfort of Military Body Armor

DTIC Science & Technology

2007-08-01

increased TM evaporative cooling potential approximately 18%. Military use of these garments could allow for increases in sweat evaporation and overall thermal comfort during operational heat exposure.

Self-contained clothing system provides protection against hazardous environments

NASA Technical Reports Server (NTRS)

1966-01-01

Self-contained clothing system protects personnel against hazardous environments. The clothing has an environmental control system and a complete protection envelope consisting of an outer garment, inner garment, underwear, boots, gloves, and helmet.

Anti-Shock Garment

NASA Technical Reports Server (NTRS)

1996-01-01

Ames Research Center developed a prototype pressure suit for hemophiliac children, based on research of astronauts' physiological responses in microgravity. Zoex Corporation picked up the design and patents and developed an anti-shock garment for paramedic use. Marketed by Dyna Med, the suit reverses the effect of shock on the body's blood distribution by applying counterpressure to the legs and abdomen, returning blood to vital organs and stabilizing body pressure until the patient reaches a hospital. The DMAST (Dyna Med Anti-Shock Trousers) employ lower pressure than other shock garments, and are non-inflatable.

Evaluation of the health risks to garment workers in the city of Xambrê-PR, Brazil.

PubMed

Sant'Ana, Marco Antônio; Kovalechen, Fabrício

2012-01-01

This study evaluated the risks for cardiovascular disease and the life habits of garment industry workers in northwestern Paraná state, Brazil. The following parameters were assessed: body composition, cardiorespiratory fitness, eating habits and physical activities by garment industry workers. Cardiovascular risk was observed in some of the studied subjects, in the form of high BMI and reduced maximal oxygen uptake. The development of a workplace quality-of-life program is suggested, aiming to stimulate the development of physical activities to improve the cardiovascular conditioning of workers.

Thermal control structure and garment

DOEpatents

Klett, James W [Knoxville, TN; Cameron, Christopher Stan [Sanford, NC

2012-03-13

A flexible thermally conductive structure. The structure generally includes a plurality of thermally conductive yarns, at least some of which are at least partially disposed adjacent to an elastomeric material. Typically, at least a portion of the plurality of thermally conductive yarns is configured as a sheet. The yarns may be constructed from graphite, metal, or similar materials. The elastomeric material may be formed from urethane or silicone foam that is at least partially collapsed, or from a similar material. A thermal management garment is provided, the garment incorporating a flexible thermally conductive structure.

Work, gender roles, and health: neglected mental health issues among female workers in the ready-made garment industry in Bangladesh

PubMed Central

Akhter, Sadika; Rutherford, Shannon; Akhter Kumkum, Feroza; Bromwich, David; Anwar, Iqbal; Rahman, Aminur; Chu, Cordia

2017-01-01

Background Traditionally, women in Bangladesh stayed at home in their role as daughter, wife, or mother. In the 1980s, economic reforms created a job market for poor, uneducated rural women in the ready-made garment industry, mostly located in urban areas. This increased participation in paid work has changed the gender roles of these women. Women’s earnings support their family, but they are also separated from their children, with impacts on their mental health and well-being. This study explores the lived experience of women in Bangladesh working in the ready-made garment industry as they strive to be mothers and family providers, often in high-stress conditions. Methods The study was conducted in two industrial areas of Dhaka over 8 months. Data collection included a literature review, 20 in-depth interviews with married female garment workers, and 14 key-informant interviews with officials from the Ministry of Labour and Employment, health-service providers within the garment factories, factory managers, and representatives of the Bangladesh Garment Manufacturers and Exporters Association. The data collected were analyzed thematically. Results Poverty was a key motivating factor for female migrant workers to move from rural areas. Their children stay in their village with their grandparents, because of their mothers’ work conditions and the lack of childcare. The women reported stress, anxiety, restlessness, and thoughts of suicide, due to the double burden of work and separation from their children and family support. Further, they cannot easily access government hospital services due to their long work hours, and the limited medical services provided in the workplace do not meet their needs. Conclusion In order to improve the health and well-being of female garment workers, steps should be taken to develop health interventions to meet the needs of this important group of workers who are contributing significantly to the economic development of the country. PMID:28860866

Work, gender roles, and health: neglected mental health issues among female workers in the ready-made garment industry in Bangladesh.

PubMed

Akhter, Sadika; Rutherford, Shannon; Akhter Kumkum, Feroza; Bromwich, David; Anwar, Iqbal; Rahman, Aminur; Chu, Cordia

2017-01-01

Traditionally, women in Bangladesh stayed at home in their role as daughter, wife, or mother. In the 1980s, economic reforms created a job market for poor, uneducated rural women in the ready-made garment industry, mostly located in urban areas. This increased participation in paid work has changed the gender roles of these women. Women's earnings support their family, but they are also separated from their children, with impacts on their mental health and well-being. This study explores the lived experience of women in Bangladesh working in the ready-made garment industry as they strive to be mothers and family providers, often in high-stress conditions. The study was conducted in two industrial areas of Dhaka over 8 months. Data collection included a literature review, 20 in-depth interviews with married female garment workers, and 14 key-informant interviews with officials from the Ministry of Labour and Employment, health-service providers within the garment factories, factory managers, and representatives of the Bangladesh Garment Manufacturers and Exporters Association. The data collected were analyzed thematically. Poverty was a key motivating factor for female migrant workers to move from rural areas. Their children stay in their village with their grandparents, because of their mothers' work conditions and the lack of childcare. The women reported stress, anxiety, restlessness, and thoughts of suicide, due to the double burden of work and separation from their children and family support. Further, they cannot easily access government hospital services due to their long work hours, and the limited medical services provided in the workplace do not meet their needs. In order to improve the health and well-being of female garment workers, steps should be taken to develop health interventions to meet the needs of this important group of workers who are contributing significantly to the economic development of the country.

The assessment of erythema and thickness on burn related scars during pressure garment therapy as a preventive measure for hypertrophic scarring.

PubMed

Van den Kerckhove, Eric; Stappaerts, Karel; Fieuws, Steffen; Laperre, Jan; Massage, Patrick; Flour, Mieke; Boeckx, Willy

2005-09-01

The aim of this study was threefold: (1) Assess the pressure loss of two types of pressure garments that are used in the treatment of hypertrophic scars after burn injury, (2) investigate the influence of two different levels of compression on erythema and thickness of burn scars and (3) examine the association between erythema and thickness. The study was a prospective trial in which 76 burn scars in 60 patients were objectively assessed with the Minolta Chromameter CR-300 for erythema and with the Dermascan C for thickness of the scar over a period of 3 months. Each patient was randomly assigned to a "normal" or "lower" compression class treatment, with respectively mean values of 15 and 10 mmHg pressure after wearing the garment for 1 month. Measurements for both parameters were taken at 0, 1, 2 and 3 months of treatment. Pressure garments with "normal" compression did lose significantly more compression over 1 month (4.82 mmHg) than did the garments from the low compression class (2.57 mmHg). Scars that were treated with garments from a "normal" compression class did score significantly better for thickness compared to the "low" compression class. The difference in thickness was most evident at 1 month. Thereafter no further significant improvement between the two different treatments over time could be obtained. This difference was not found for erythema. Positive correlations could be found between erythema and thickness values at all of the three test points while changes in erythema and thickness only correlated significantly after the first month. The pattern of change of both parameters correlated at a high level of significance after 3 months of treatment. These data suggest that pressure garments that deliver a pressure of at least 15 mmHg pressure tend to accelerate scar maturation and that measurements of the pattern of change of the erythema can be used to predict changes in scar thickness and vice versa.

A simple theoretical model of heat and moisture transport in multi-layer garments in cool ambient air.

PubMed

Wissler, Eugene H; Havenith, George

2009-03-01

Overall resistances for heat and vapor transport in a multilayer garment depend on the properties of individual layers and the thickness of any air space between layers. Under uncomplicated, steady-state conditions, thermal and mass fluxes are uniform within the garment, and the rate of transport is simply computed as the overall temperature or water concentration difference divided by the appropriate resistance. However, that simple computation is not valid under cool ambient conditions when the vapor permeability of the garment is low, and condensation occurs within the garment. Several recent studies have measured heat and vapor transport when condensation occurs within the garment (Richards et al. in Report on Project ThermProject, Contract No. G6RD-CT-2002-00846, 2002; Havenith et al. in J Appl Physiol 104:142-149, 2008). In addition to measuring cooling rates for ensembles when the skin was either wet or dry, both studies employed a flat-plate apparatus to measure resistances of individual layers. Those data provide information required to define the properties of an ensemble in terms of its individual layers. We have extended the work of previous investigators by developing a rather simple technique for analyzing heat and water vapor transport when condensation occurs within a garment. Computed results agree well with experimental results reported by Richards et al. (Report on Project ThermProject, Contract No. G6RD-CT-2002-00846, 2002) and Havenith et al. (J Appl Physiol 104:142-149, 2008). We discuss application of the method to human subjects for whom the rate of sweat secretion, instead of the partial pressure of water on the skin, is specified. Analysis of a more complicated five-layer system studied by Yoo and Kim (Text Res J 78:189-197, 2008) required an iterative computation based on principles defined in this paper.

Armored garment for protecting

DOEpatents

Purvis, James W [Albuquerque, NM; Jones, II, Jack F.; Whinery, Larry D [Albuquerque, NM; Brazfield, Richard [Albuquerque, NM; Lawrie, Catherine [Tijeras, NM; Lawrie, David [Tijeras, NM; Preece, Dale S [Watkins, CO

2009-08-11

A lightweight, armored protective garment for protecting an arm or leg from blast superheated gases, blast overpressure shock, shrapnel, and spall from a explosive device, such as a Rocket Propelled Grenade (RPG) or a roadside Improvised Explosive Device (IED). The garment has a ballistic sleeve made of a ballistic fabric, such as an aramid fiber (e.g., KEVLAR.RTM.) cloth, that prevents thermal burns from the blast superheated gases, while providing some protection from fragments. Additionally, the garment has two or more rigid armor inserts that cover the upper and lower arm and protect against high-velocity projectiles, shrapnel and spall. The rigid inserts can be made of multiple plies of a carbon/epoxy composite laminate. The combination of 6 layers of KEVLAR.RTM. fabric and 28 plies of carbon/epoxy laminate inserts (with the inserts being sandwiched in-between the KEVLAR.RTM. layers), can meet the level IIIA fragmentation minimum V.sub.50 requirements for the US Interceptor Outer Tactical Vest.

Flight test evaluation of an RAF high altitude partial pressure protective assembly

NASA Technical Reports Server (NTRS)

Ashworth, G. R.; Putnam, T. W.; Dana, W. J.; Enevoldson, E. K.; Winter, W. R.

1979-01-01

A partial pressure suit was evaluated during tests in an F-104 and F-15 as a protective garment for emergency descents. The garment is an pressure jerkin and modified anti-g suit combined with an oronasal mask. The garment can be donned and doffed at the aircraft to minimize thermal buildup. The oronasal mask was favored by the pilots due to its immobility on the face during high g-loading. The garment was chosen to provide optimum dexterity for the pilot, which is not available in a full pressure suit, while protecting the pilot at altitudes up to 18,288 meters, during a cabin decompression, and subsequent aircraft descent. During cabin decompressions in the F-104 and F-15, cabin pressure altitude was measured at various aircraft angles of attack, Mach numbers, and altitudes to determine the effect of the aerodynamic slipstream on the cabin altitude.

Smart garments for safety improvement of emergency/disaster operators.

PubMed

Curone, Davide; Dudnik, Gabriela; Loriga, Giannicola; Luprano, Jean; Magenes, Giovanni; Paradiso, Rita; Tognetti, Alessandro; Bonfiglio, Annalisa

2007-01-01

The main purpose of the European project ProeTEX is to develop equipment to improve safety, coordination and efficiency of emergency disaster intervention personnel like fire-fighters or civil protection rescuers. The equipment consists of a new generation of "smart" garments, integrating wearable sensors which will allow monitoring physiological parameters, position and activity of the user, as like as environmental variables of the operating field in which rescuers are working: both commercial and newly developed textile and fibre based sensors will be included. The garments will also contain an electronic box to process data collected by the sensors and a communication system enabling the transmission of data to the other rescuers and to a monitoring station. Also a "smart" victim patch will be developed: a wearable garment which will allow monitoring physiological parameters of injured civilians involved in disasters, with the aim of optimizing their survival management.

Education of garment workers: prevention of work related musculoskeletal disorders.

PubMed

Pun, Jane Chao; Burgel, Barbara J; Chan, Jackie; Lashuay, Nan

2004-08-01

This educational intervention was designed as part of a garment worker occupational health and safety initiative, with the goal to reduce musculoskeletal symptoms in this monolingual Cantonese speaking population. Using risk communication and the Chinese concepts of yin and yang, the class curriculum was designed to be participatory. It focused on linking symptoms to high risk work activities; explaining the nature of musculoskeletal injury; and encouraging compliance with self care measures of ice, stretching, and early symptom reporting. A total of 21 women completed the Healthy Work Classes, with an increase in perceived levels of energy measured after each class. Additionally, contingency contracting for both individual and workplace change was piloted. This curriculum was revised to become a "train the trainer" program, with training of garment worker leaders and the goal to disseminate this prevention based curriculum to garment workers in the Oakland, California community.

The horizontal working mobility of employees with garment technique educational background

NASA Astrophysics Data System (ADS)

Supraptono, Eko; Sudana, I. Made; Rini, Sri Hastuti Eko

2018-03-01

The purposes of this report are: 1) to know how is the working mobility for garment employees, 2) to analyze the factors that caused working mobility, and new working orientation who searched by garment employees. This research is using qualitative and quantitative approach. The Informant in this research is gotten by purposive action. The data collecting techniques are observations, interviews, and documentations. The data analysis is using descriptive qualitative analysis by observing every aspect. The result of research shows that the criteria of the labor migration was high. It can be seen from Ungaran Sari Garment Company. The length of the migration is high, between 1 until 6 months. and the types of new job that searched by the employees is appropriate job vacancy with their competence. Some factors that influence the working mobility are mental of the workers and company management system. The orientation of the new job is feeling comfortable while working.

Structural, Chemical, and Mechanical Properties of Pressure Garments as a Function of Simulated Use and Repeated Laundering.

PubMed

Malara, Megan M; Kim, Jayne Y; Clark, J Alexander; Blackstone, Britani N; Ruegsegger, Mark A; Bailey, J Kevin; Supp, Dorothy M; Powell, Heather M

2018-06-13

Pressure garments are widely employed for management of postburn scarring. Although pressure magnitude has been linked to efficacy, maintenance of uniform pressure delivery is challenging. An understanding of garment fabric properties is needed to optimize pressure delivery for the duration of garment use. To address this issue, compression vests were manufactured using two commonly used fabrics, Powernet or Dri-Tek Tricot, to achieve 10% reduction in circumference for a child-sized mannequin. Applied pressure was tracked on five anatomical sites over 23 hours, before laundering or after one and five laundering cycles. Load relaxation and fatigue of fabrics were tested before laundering or after one and five laundering cycles, and structural analysis via scanning electron microscopy was performed. Prior to laundering, pressure vests fabricated using Powernet or Dri-Tek Tricot generated a maximum pressure on the mannequin of 20 and 23 mm Hg, respectively. With both fabrics, pressure decreased during daily wear. Following five laundering cycles, Dri-Tek Tricot vests delivered a maximum of 7 vs 15 mm Hg pressure for Powernet at the same site. In cyclic tensile and load relaxation tests, exerted force correlated with fabric weave orientation with greatest force measured parallel to a fabric's long axis. The results demonstrate that Powernet exhibited the greatest applied force with the least garment fatigue. Fabric orientation with respect to the primary direction of tension was a critical factor in pressure generation and maintenance. This study suggests that fabrication of garments using Powernet with its long axis parallel to patient's body part circumference may enhance the magnitude and maintenance of pressure delivery.

Interim pressure garment therapy (4-6 mmHg) and its effect on donor site healing in burn patients: study protocol for a randomised controlled trial.

PubMed

Donovan, Michelle L; Muller, Michael J; Simpson, Claire; Rudd, Michael; Paratz, Jennifer

2016-04-26

Pressure garment therapy (PGT) is well accepted and commonly used by clinicians in the treatment of burns scars and grafts. The medium to high pressures (24-40 mmHg) in these garments can support scar minimisation, and evidence is well documented for this particular application. However, PGT specifically for burn donor sites, of which a sequela is also scarring, is not well documented. This study protocol investigates the impact of a low pressure (4-6 mmHg) interim garment on donor site healing and scarring. With a primary purpose of holding donor dressings in place, the application of the interim pressure garment (IPG) appears to have been twofold. IPGs for donor sites have involved inconsistent application with a focus on securing wound dressing rather than scar management. However, anecdotal and observational evidence suggests that IPGs also make a difference to some patient's scar outcomes for donor sites. This study protocol outlines a randomised controlled trial designed to test the effectiveness of this treatment on reducing scarring to burn donor sites. This study is a single-centre, single (assessor)-blinded, randomised control trial in patients with burns donor sites to their thighs. Patients will be randomly allocated to a control group (with no compression to donor sites) or to an experimental group (with compression to donor sites) as the comparative treatment. Groups will be compared at baseline regarding the important prognostic indicators: donor site location, depth, size, age, and time since graft (5 days). The IPG treatment will be administered post-operatively (on day 5). Follow-up assessments and garment replacement will be undertaken fortnightly for a period of 2 months. This study focuses on a unique area of burns scar management using a low-pressure tubular support garment for the reduction of donor site scars. Such therapy specifically for donor scar management is poorly represented in the literature. This study was designed to test a potentially cost-effective scar prevention for patients with donor sites to the thigh. No known studies of this nature have been carried out to date, and there is a need for rigorous clinical evidence for low-pressure support garments for donor site scar minimisation. Australian New Zealand Clinical Trials Registry identifier ACTRN12610000127000 . Registered 8 Mar 2010.

Garment selection for cleanrooms and controlled environments for spacecraft

NASA Astrophysics Data System (ADS)

Watts, Ethel J.

Strict contamination control practices are exercised throughout the lifetime of a spacecraft in order to satisfy the performance requirements of the system. Spacecraft materials are carefully selected to have low outgassing values and particulate deposition. Parts are cleaned, and the vehicle is assembled in cleanrooms and work stations having controlled environments. Specifications are examined which govern the selection of special items of clothing designed to protect spacecraft from contaminants released by personnel and by garments. Special clothing includes coveralls, footwear, and head/face covers. Garments appropriate for both hazardous (meltproof as well as flame resistant), and nonhazardous operations are described.

Clean Room Apparel

NASA Technical Reports Server (NTRS)

1989-01-01

American Hospital Supply Corporation (AHSC), Baxter Healthcare Corporation's predecessor, used the NASA informational base on contamination control technology to improve industrial contamination control technology. When a study determined that microscopic body particles escaping through tiny "windows" in woven garments worn by workers were the greatest source of contamination, AHSC developed TYVEK. This non-woven material filters 99% of all particulate matter larger than half a micron. Baxter Healthcare added a polyimide coating which seals and ties down any loose fibers, providing greater durability. Stress points along seams have been minimized to make the garment almost tearproof. Micro-Clean 212 garments are individually packaged and disposable.

The effect of body postures on the distribution of air gap thickness and contact area.

PubMed

Mert, Emel; Psikuta, Agnes; Bueno, Marie-Ange; Rossi, René M

2017-02-01

The heat and mass transfer in clothing is predominantly dependent on the thickness of air layer and the magnitude of contact area between the body and the garment. The air gap thickness and magnitude of the contact area can be affected by the posture of the human body. Therefore, in this study, the distribution of the air gap and the contact area were investigated for different body postures of a flexible manikin. In addition, the effect of the garment fit (regular and loose) and style (t-shirts, sweatpants, jacket and trousers) were analysed for the interaction between the body postures and the garment properties. A flexible manikin was scanned using a three-dimensional (3D) body scanning technique, and the scans were post-processed in dedicated software. The body posture had a strong effect on the air gap thickness and the contact area for regions where the garment had a certain distance from the body. Furthermore, a mathematical model was proposed to estimate the possible heat transfer coefficient for the observed air layers and their change with posture. The outcome of this study can be used to improve the design of the protective and functional garments and predict their effect on the human body.

Characterization of silver particles in the stratum corneum of healthy subjects and atopic dermatitis patients dermally exposed to a silver-containing garment

PubMed Central

Bianco, Carlotta; Visser, Maaike J.; Pluut, Olivier A.; Svetličić, Vesna; Pletikapić, Galja; Jakasa, Ivone; Riethmuller, Christoph; Adami, Gianpiero; Filon, Francesca Larese; Schwegler-Berry, Diane; Stefaniak, Aleksandr B.; Kezic, Sanja

2018-01-01

Silver is increasingly being used in garments to exploit its antibacterial properties. Information on the presence of silver nanoparticles (AgNPs) in garments and their in vivo penetration across healthy and impaired skin from use is limited. We investigated the presence of AgNPs in a silver containing garment and in the stratum corneum (SC) of healthy subjects (CTRLs) and individuals with atopic dermatitis (AD). Seven CTRLs and seven AD patients wore a silver sleeve (13% Ag w/w) 8 h/day for five days on a forearm and a placebo sleeve on the other forearm. After five days, the layers of the SC were collected by adhesive tapes. The silver particles in the garment and SC were characterized by scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDX) and atomic force microscopy (AFM). AFM and SEM revealed the presence of sub-micrometre particles having a broad range of sizes (30–500 nm) on the surface of the garment that were identified as silver. On the SC tapes collected from different depths, aggregates with a wide range of sizes (150 nm−2 μm) and morphologies were found. Most aggregates contained primarily silver, although some also contained chlorine and sulfur. There was no clear difference in the number or size of the aggregates observed in SC between healthy and AD subjects. After use, AgNPs and their aggregates were present in the SC at different depths of both healthy subjects and AD patients. Their micrometre size suggests that aggregation likely occurred in the SC. PMID:27647219

Meta-analysis of the effects of microclimate cooling systems on human performance under thermal stressful environments: potential applications to occupational workers.

PubMed

Chan, Albert P C; Song, Wenfang; Yang, Yang

2015-01-01

This study aims to determine the appropriate microclimate cooling systems (MCSs) to reduce heat stress and improve human performance of occupational workers and their practicality in the occupational field. Meta-analysis was employed to summarize, analyze, and compare the effects of various MCSs on human performance with corresponding physiological and psychological responses, thereby providing solid suggestions for selecting suitable MCSs for occupational workers. Wearing MCSs significantly attenuated the increases in core temperature (-0.34 °C/h) and sweating rate (-0.30 L/h), and significantly improved human performance (+29.9%, effect size [EFS] = 1.1) compared with no cooling condition (CON). Cold air-cooled garments (ACG-Cs; +106.2%, EFS = 2.32) exhibited greater effects on improving human performance among various microclimate cooling garments (MCGs), followed by liquid cooling garments (LCGs; +68.1%, EFS = 1.86) and hybrid cooling garment combining air and liquid cooling (HBCG-AL; +59.1%, EFS=3.38), natural air-cooled garments (ACG-Ns; +39.9%, EFS = 1.12), and phase change material cooling garments (PCMCGs; +19.5%, EFS = 1.2). Performance improvement was observed to be positively and linearly correlated to the differences of core temperature increase rate (r = 0.65, p < 0.01) and sweating rate (r = 0.80, p < 0.001) between MCSs and CON. Considering their application in industrial settings, ACG-Cs, LCGs, and HBCG-AL are practical for work, in which workers do not move frequently, whereas ACG-Ns and PCMCGs are more applicable for the majority of occupational workers. Further enhancement of the cooling efficiency of these two cooling strategies should be initiated. Copyright © 2015 Elsevier Ltd. All rights reserved.

Clothes Cleaning Studies for Long Duration Manned Missions

NASA Technical Reports Server (NTRS)

Tamsen, Maria

2015-01-01

Imagine how much could be saved in just 5 years if the garments that are sent to space are reduced by half. My project consisted in analyzing the efficiency of steam cleaning with and without pretreatment of selected garments. Crewmembers wear clothes for a certain period of time, and then these garments are discarded. Having crewmembers wearing their clothes for longer time while giving them the opportunity of reusing the garments (which at the moment is not possible) will reduce costs considerably. More importantly, it will build the path for sustaining human presence in deep space. In addition, reusing cleaned clothes will help crewmembers be in a more hygienic environment because the amount of trash will be reduced. By limiting the amount of garments that are sent, volume and mass will be reduced. As a result, there will be more space to pack other necessary goods. The main duties within the project were to develop a pre wash procedure that will be used for all of the fabrics (4 different fabrics were included in the experiment), to establish a time for the process of cleaning the garments with steam, to know the amount of oil and salt solution necessary to soil the fabric and that will be completely absorbed by the fabric, to determine the amount of chemical agent to use for removing the stains, to create a matrix with the SAS software that will have all the possible combinations to carry out during the experiment when soiling the shirts, to measure the stains before and after the steam process, to measure the cleanliness of the fabric before and after with the use of the Gray Scale for Staining, and to find out whether or not the observations are valid and useful.

29 CFR 520.300 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... from leather or from any shoe-upper material of all cut stock and findings for footwear, including bows...) Rainwear means the manufacture of waterproofed garments and raincoats from oiled cloth or other materials... negligees from woven fabrics; corsets and other body supporting garments from any material; infants' and...

29 CFR 520.300 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... from leather or from any shoe-upper material of all cut stock and findings for footwear, including bows...) Rainwear means the manufacture of waterproofed garments and raincoats from oiled cloth or other materials... negligees from woven fabrics; corsets and other body supporting garments from any material; infants' and...

29 CFR 520.300 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... from leather or from any shoe-upper material of all cut stock and findings for footwear, including bows...) Rainwear means the manufacture of waterproofed garments and raincoats from oiled cloth or other materials... negligees from woven fabrics; corsets and other body supporting garments from any material; infants' and...

Liquid-circulating garment controls thermal balance

NASA Technical Reports Server (NTRS)

Kuznetz, L. H.

1977-01-01

Experimental data and mathematical model of human thermoregulatory system have been used to investigate use of liquid-circulatory garment (LCG) to control thermal balance. Model proved useful as accurate simulator of such variables as sweat rate, skin temperature, core temperature, and radiative, evaporative, and LCG heat loss.

English in the Garment Shops.

ERIC Educational Resources Information Center

Verplaetse, Lorrie

This text for limited-English-speaking workers in the garment industry consits of illustrated vocabulary words, grammar lessons, narratives or brief readings, and exercises on employment-related topics. The first section focuses on shop talk, including job-specific vocabulary, simple expressions and explanations, social language, seeking and…

Thermal buffering performance of composite phase change materials applied in low-temperature protective garments

NASA Astrophysics Data System (ADS)

Yang, Kai; Jiao, Mingli; Yu, Yuanyuan; Zhu, Xueying; Liu, Rangtong; Cao, Jian

2017-07-01

Phase change material (PCM) is increasingly being applied in the manufacturing of functional thermo-regulated textiles and garments. This paper investigated the thermal buffering performance of different composite PCMs which are suitable for the application in functional low-temperature protective garments. First, according to the criteria selecting PCM for functional textiles/garments, three kinds of pure PCM were selected as samples, which were n-hexadecane, n-octadecane and n-eicosane. To get the adjustable phase change temperature range and higher phase change enthalpy, three kinds of composite PCM were prepared using the above pure PCM. To evaluate the thermal buffering performance of different composite PCM samples, the simulated low-temperature experiments were performed in the climate chamber, and the skin temperature variation curves in three different low temperature conditions were obtained. Finally composite PCM samples’ thermal buffering time, thermal buffering capacity and thermal buffering efficiency were calculated. Results show that the comprehensive thermal buffering performance of n-octadecane and n-eicosane composite PCM is the best.

Advanced integrated life support system update

NASA Technical Reports Server (NTRS)

Whitley, Phillip E.

1994-01-01

The Advanced Integrated Life Support System Program (AILSS) is an advanced development effort to integrate the life support and protection requirements using the U.S. Navy's fighter/attack mission as a starting point. The goal of AILSS is to optimally mate protection from altitude, acceleration, chemical/biological agent, thermal environment (hot, cold, and cold water immersion) stress as well as mission enhancement through improved restraint, night vision, and head-mounted reticules and displays to ensure mission capability. The primary emphasis to date has been to establish garment design requirements and tradeoffs for protection. Here the garment and the human interface are treated as a system. Twelve state-off-the-art concepts from government and industry were evaluated for design versus performance. On the basis of a combination of centrifuge, thermal manikin data, thermal modeling, and mobility studies, some key design parameters have been determined. Future efforts will concentrate on the integration of protection through garment design and the use of a single layer, multiple function concept to streamline the garment system.

New calibration method for I-scan sensors to enable the precise measurement of pressures delivered by 'pressure garments'.

PubMed

Macintyre, Lisa

2011-11-01

Accurate measurement of the pressure delivered by medical compression products is highly desirable both in monitoring treatment and in developing new pressure inducing garments or products. There are several complications in measuring pressure at the garment/body interface and at present no ideal pressure measurement tool exists for this purpose. This paper summarises a thorough evaluation of the accuracy and reproducibility of measurements taken following both of Tekscan Inc.'s recommended calibration procedures for I-scan sensors; and presents an improved method for calibrating and using I-scan pressure sensors. The proposed calibration method enables accurate (±2.1 mmHg) measurement of pressures delivered by pressure garments to body parts with a circumference ≥30 cm. This method is too cumbersome for routine clinical use but is very useful, accurate and reproducible for product development or clinical evaluation purposes. Copyright © 2011 Elsevier Ltd and ISBI. All rights reserved.

THE ABSORPTION PROPERTIES OF LEAD-FREE GARMENTS FOR USE IN RADIATION PROTECTION.

PubMed

Çetin, Hüseyin; Yurt, Aysegül; Yüksel, Serra Haznaci

2017-04-15

In this study, the absorption capability and the weight of various radiation-shielding materials were evaluated, for applications as alternatives to lead garments. Toxicity, atomic number, density, K-edge absorption energy and availability of elements that can serve as an alternative to lead, including tin, antimony, bismuth and tungsten, were considered. The attenuation coefficients of these elements were determined using the XCOM software package, and these metals were mixed with polymers at 50, 70, 80 and 85 % mass ratios. It can be concluded that all of the new shielding materials used in the study can be used for a diagnostic range of X-rays. However, they were compared with the commercial lead garments in terms of weight and attenuation coefficient; the 85 % samples were lighter than a 0.5-mm lead garment and provided superior radiation protection, which demonstrates its potential for commercial applications. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Physiologic Responses Produced by Active and Passive Personal Cooling Vests

NASA Technical Reports Server (NTRS)

Ku, Yu-Tsuan E.; Lee, Hank C.; Montgomery, Leslie D.; Luna, Bernadette

2000-01-01

Personal thermoregulatory systems which provide chest cooling are used in the industrial and aerospace environments to alleviate thermal stress. However, little information is available regarding the physiologic and circulatory changes produced by routine operation of these systems. The objectives of this study were to document and compare the subjects' response to three cooling vests in their recommended configurations. The Life Enhancement Tech (LET) lightweight active cooling vest with cap, the MicroClimate Systems Change of Phase garment (MCS), and the Steele Vest were each used to cool the chest regions of 12 male and 8 female Healthy subjects (21 to 69 yr.) in this study. The subjects, seated in an upright position at normal room temperature (approx. 22 C), were tested for 60 min. with one of the cooling garments. The LET active garment had an initial coolant fluid inlet temperature of 60 F, and was ramped down to 50 F. Oral, right and left ear canal temperatures were logged manually every 5 min. Arm, leg, chest and rectal temperatures; heart rate; and respiration were recorded continuously on a U.F.I., Inc. Biolog ambulatory monitor. For men, all three vests had similar, significant cooling effects. Decreases in the average rectal temperature, oral temperature, and ear canal temperatures were approximately 0.2 C, 0.2 C and 0.1 C, respectively. In contrast to the men, the female subjects wearing the MCS and Steel vests had similar cooling responses in which the core temperature remained elevated and oral and ear canal temperatures did not drop. The LET active garment cooled most of the female subjects in this study; rectal, oral and ear temperature decreased about 0.2 C, 0.3 C and 0.3 C, respectively. These results show that the garment configurations tested do not elicit a similar thermal response in all subjects. A gender difference is evident. The LET active garment configuration was most effective in decreasing temperatures of the female subjects; the MCS vest was least effective. For male subjects, the three vests appear to be more nearly equivalent. The active garment system under study included a cooling cap, which may account for some of the difference in response.

Sensorized Garments and Textrode-Enabled Measurement Instrumentation for Ambulatory Assessment of the Autonomic Nervous System Response in the ATREC Project

PubMed Central

Seoane, Fernando; Ferreira, Javier; Alvarez, Lorena; Buendia, Ruben; Ayllón, David; Llerena, Cosme; Gil-Pita, Roberto

2013-01-01

Advances in textile materials, technology and miniaturization of electronics for measurement instrumentation has boosted the development of wearable measurement systems. In several projects sensorized garments and non-invasive instrumentation have been integrated to assess on emotional, cognitive responses as well as physical arousal and status of mental stress through the study of the autonomous nervous system. Assessing the mental state of workers under stressful conditions is critical to identify which workers are in the proper state of mind and which are not ready to undertake a mission, which might consequently risk their own life and the lives of others. The project Assessment in Real Time of the Stress in Combatants (ATREC) aims to enable real time assessment of mental stress of the Spanish Armed Forces during military activities using a wearable measurement system containing sensorized garments and textile-enabled non-invasive instrumentation. This work describes the multiparametric sensorized garments and measurement instrumentation implemented in the first phase of the project required to evaluate physiological indicators and recording candidates that can be useful for detection of mental stress. For such purpose different sensorized garments have been constructed: a textrode chest-strap system with six repositionable textrodes, a sensorized glove and an upper-arm strap. The implemented textile-enabled instrumentation contains one skin galvanometer, two temperature sensors for skin and environmental temperature and an impedance pneumographer containing a 1-channel ECG amplifier to record cardiogenic biopotentials. With such combinations of garments and non-invasive measurement devices, a multiparametric wearable measurement system has been implemented able to record the following physiological parameters: heart and respiration rate, skin galvanic response, environmental and peripheral temperature. To ensure the proper functioning of the implemented garments and devices the full series of 12 sets have been functionally tested recording cardiogenic biopotential, thoracic impedance, galvanic skin response and temperature values. The experimental results indicate that the implemented wearable measurement systems operate according to the specifications and are ready to be used for mental stress experiments, which will be executed in the coming phases of the project with dozens of healthy volunteers. PMID:23857264

Sensorized garments and textrode-enabled measurement instrumentation for ambulatory assessment of the autonomic nervous system response in the ATREC project.

PubMed

Seoane, Fernando; Ferreira, Javier; Alvarez, Lorena; Buendia, Ruben; Ayllón, David; Llerena, Cosme; Gil-Pita, Roberto

2013-07-12

Advances in textile materials, technology and miniaturization of electronics for measurement instrumentation has boosted the development of wearable measurement systems. In several projects sensorized garments and non-invasive instrumentation have been integrated to assess on emotional, cognitive responses as well as physical arousal and status of mental stress through the study of the autonomous nervous system. Assessing the mental state of workers under stressful conditions is critical to identify which workers are in the proper state of mind and which are not ready to undertake a mission, which might consequently risk their own life and the lives of others. The project Assessment in Real Time of the Stress in Combatants (ATREC) aims to enable real time assessment of mental stress of the Spanish Armed Forces during military activities using a wearable measurement system containing sensorized garments and textile-enabled non-invasive instrumentation. This work describes the multiparametric sensorized garments and measurement instrumentation implemented in the first phase of the project required to evaluate physiological indicators and recording candidates that can be useful for detection of mental stress. For such purpose different sensorized garments have been constructed: a textrode chest-strap system with six repositionable textrodes, a sensorized glove and an upper-arm strap. The implemented textile-enabled instrumentation contains one skin galvanometer, two temperature sensors for skin and environmental temperature and an impedance pneumographer containing a 1-channel ECG amplifier to record cardiogenic biopotentials. With such combinations of garments and non-invasive measurement devices, a multiparametric wearable measurement system has been implemented able to record the following physiological parameters: heart and respiration rate, skin galvanic response, environmental and peripheral temperature. To ensure the proper functioning of the implemented garments and devices the full series of 12 sets have been functionally tested recording cardiogenic biopotential, thoracic impedance, galvanic skin response and temperature values. The experimental results indicate that the implemented wearable measurement systems operate according to the specifications and are ready to be used for mental stress experiments, which will be executed in the coming phases of the project with dozens of healthy volunteers.

Muscle Performance Investigated With a Novel Smart Compression Garment Based on Pressure Sensor Force Myography and Its Validation Against EMG.

PubMed

Belbasis, Aaron; Fuss, Franz Konstantin

2018-01-01

Muscle activity and fatigue performance parameters were obtained and compared between both a smart compression garment and the gold-standard, a surface electromyography (EMG) system during high-speed cycling in seven participants. The smart compression garment, based on force myography (FMG), comprised of integrated pressure sensors that were sandwiched between skin and garment, located on five thigh muscles. The muscle activity was assessed by means of crank cycle diagrams (polar plots) that displayed the muscle activity relative to the crank cycle. The fatigue was assessed by means of the median frequency of the power spectrum of the EMG signal; the fractal dimension (FD) of the EMG signal; and the FD of the pressure signal. The smart compression garment returned performance parameters (muscle activity and fatigue) comparable to the surface EMG. The major differences were that the EMG measured the electrical activity, whereas the pressure sensor measured the mechanical activity. As such, there was a phase shift between electrical and mechanical signals, with the electrical signals preceding the mechanical counterparts in most cases. This is specifically pronounced in high-speed cycling. The fatigue trend over the duration of the cycling exercise was clearly reflected in the fatigue parameters (FDs and median frequency) obtained from pressure and EMG signals. The fatigue parameter of the pressure signal (FD) showed a higher time dependency ( R 2 = 0.84) compared to the EMG signal. This reflects that the pressure signal puts more emphasis on the fatigue as a function of time rather than on the origin of fatigue (e.g., peripheral or central fatigue). In light of the high-speed activity results, caution should be exerted when using data obtained from EMG for biomechanical models. In contrast to EMG data, activity data obtained from FMG are considered more appropriate and accurate as an input for biomechanical modeling as they truly reflect the mechanical muscle activity. In summary, the smart compression garment based on FMG is a valid alternative to EMG-garments and provides more accurate results at high-speed activity (avoiding the electro-mechanical delay), as well as clearly measures the progress of muscle fatigue over time.

Muscle Performance Investigated With a Novel Smart Compression Garment Based on Pressure Sensor Force Myography and Its Validation Against EMG

PubMed Central

Belbasis, Aaron; Fuss, Franz Konstantin

2018-01-01

Muscle activity and fatigue performance parameters were obtained and compared between both a smart compression garment and the gold-standard, a surface electromyography (EMG) system during high-speed cycling in seven participants. The smart compression garment, based on force myography (FMG), comprised of integrated pressure sensors that were sandwiched between skin and garment, located on five thigh muscles. The muscle activity was assessed by means of crank cycle diagrams (polar plots) that displayed the muscle activity relative to the crank cycle. The fatigue was assessed by means of the median frequency of the power spectrum of the EMG signal; the fractal dimension (FD) of the EMG signal; and the FD of the pressure signal. The smart compression garment returned performance parameters (muscle activity and fatigue) comparable to the surface EMG. The major differences were that the EMG measured the electrical activity, whereas the pressure sensor measured the mechanical activity. As such, there was a phase shift between electrical and mechanical signals, with the electrical signals preceding the mechanical counterparts in most cases. This is specifically pronounced in high-speed cycling. The fatigue trend over the duration of the cycling exercise was clearly reflected in the fatigue parameters (FDs and median frequency) obtained from pressure and EMG signals. The fatigue parameter of the pressure signal (FD) showed a higher time dependency (R2 = 0.84) compared to the EMG signal. This reflects that the pressure signal puts more emphasis on the fatigue as a function of time rather than on the origin of fatigue (e.g., peripheral or central fatigue). In light of the high-speed activity results, caution should be exerted when using data obtained from EMG for biomechanical models. In contrast to EMG data, activity data obtained from FMG are considered more appropriate and accurate as an input for biomechanical modeling as they truly reflect the mechanical muscle activity. In summary, the smart compression garment based on FMG is a valid alternative to EMG-garments and provides more accurate results at high-speed activity (avoiding the electro-mechanical delay), as well as clearly measures the progress of muscle fatigue over time. PMID:29725306

Method and system rapid piece handling

DOEpatents

Spletzer, Barry L.

1996-01-01

The advent of high-speed fabric cutters has made necessary the development of automated techniques for the collection and sorting of garment pieces into collated piles of pieces ready for assembly. The present invention enables a new method for such handling and sorting of garment parts, and to apparatus capable of carrying out this new method. The common thread is the application of computer-controlled shuttling bins, capable of picking up a desired piece of fabric and dropping it in collated order for assembly. Such apparatus with appropriate computer control relieves the bottleneck now presented by the sorting and collation procedure, thus greatly increasing the overall rate at which garments can be assembled.

Space suit

NASA Technical Reports Server (NTRS)

Shepard, L. F.; Durney, G. P.; Case, M. C.; Kenneway, A. J., III; Wise, R. C.; Rinehart, D.; Bessette, R. J.; Pulling, R. C. (Inventor)

1973-01-01

A pressure suit for high altitude flights, particularly space missions is reported. The suit is designed for astronauts in the Apollo space program and may be worn both inside and outside a space vehicle, as well as on the lunar surface. It comprises an integrated assembly of inner comfort liner, intermediate pressure garment, and outer thermal protective garment with removable helmet, and gloves. The pressure garment comprises an inner convoluted sealing bladder and outer fabric restraint to which are attached a plurality of cable restraint assemblies. It provides versitility in combination with improved sealing and increased mobility for internal pressures suitable for life support in the near vacuum of outer space.

Liquid cooled brassiere and method of diagnosing malignant tumors therewith

NASA Technical Reports Server (NTRS)

Elkins, W.; Williams, B. A.; Tickner, E. G. (Inventor)

1976-01-01

A device for enhancing the detection of malignant tissue in the breasts of a woman was described. A brassiere-like garment which is fitted with a pair of liquid-perfused cooling panels which completely and compliantly cover the breasts and upper torso was studied. The garment is connected by plastic tubing to a liquid cooling system comprising a fluid pump, a solenoid control valve for controlling the flow of fluid to either the cooling unit or the heating unit, a fluid reservoir, a temperature sensor in the reservoir, and a restrictor valve to control the pressure in the garment inlet cooling line.

Drug smuggling using clothing impregnated with cocaine.

PubMed

McDermott, Seán D; Power, John D

2005-11-01

A case study is presented where a woman travelling from South America to the Republic of Ireland was detained at Dublin Airport and articles of clothing she had in her luggage were found to be impregnated with cocaine. The study shows that the amount of powder recovered from the garments was approximately 14% of the total weight of the garments. The cocaine was in the form of cocaine hydrochloride and the purity was approximately 80%. An examination of the garments under filtered light highlighted the areas exposed to cocaine and indicated that the method of impregnation was by pouring liquid containing cocaine onto the clothing.

21 CFR 876.5920 - Protective garment for incontinence.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Protective garment for incontinence. 876.5920 Section 876.5920 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES GASTROENTEROLOGY-UROLOGY DEVICES Therapeutic Devices § 876.5920 Protective...

Biomedical Use of Aerospace Personal Cooling Garments

NASA Technical Reports Server (NTRS)

Webbon, Bruce W.; Montgomery, Leslie D.; Callaway, Robert K.

1994-01-01

Personal thermoregulatory systems are required during extravehicular activity (EVA) to remove the metabolic heat generated by the suited astronaut. The Extravehicular and Protective Systems (STE) Branch of NASA Ames Research Center has developed advanced concepts or liquid cooling garments for both industrial and biomedical applications for the past 25 years. Examples of this work include: (1) liquid cooled helmets for helicopter pilots and race car drivers; (2) vests for fire and mine rescue personnel; (3) bras to increase the definition of tumors during thermography; (4) lower body garments for young women with erythomelaigia; and (5) whole body garments used by patients with multiple sclerosis (MS). The benefits of the biomedical application of artificial thermoregulation received national attention through two recent events: (1) the liquid-cooled garment technology was inducted into the United States Space Foundation's Space Technology Hall of Fame (1993); and (2) NASA has signed a joint Memorandum of Understanding with the Multiple Sclerosis Association (1994) to share this technology for use with MS patient treatment. The STE Branch is currently pursuing a program to refine thermoregulatory design in light of recent technology developments that might be applicable for use by several medical patient populations. Projects have been initiated to apply thermoregulatory technology for the treatment and/or rehabilitation of patients with spinal cord injuries, multiple sclerosis, migraine headaches, and to help prevent the loss of hair during chemotherapy.

Microfiber Masses Recovered from Conventional Machine Washing of New or Aged Garments.

PubMed

Hartline, Niko L; Bruce, Nicholas J; Karba, Stephanie N; Ruff, Elizabeth O; Sonar, Shreya U; Holden, Patricia A

2016-11-01

Synthetic textiles can shed numerous microfibers during conventional washing, but evaluating environmental consequences as well as source-control strategies requires understanding mass releases. Polyester apparel accounts for a large proportion of the polyester market, and synthetic jackets represent the broadest range in apparel construction, allowing for potential changes in manufacturing as a mitigation measure to reduce microfiber release during laundering. Here, detergent-free washing experiments were conducted and replicated in both front- and top-load conventional home machines for five new and mechanically aged jackets or sweaters: four from one name-brand clothing manufacturer (three majority polyester fleece, and one nylon shell with nonwoven polyester insulation) and one off-brand (100% polyester fleece). Wash water was filtered to recover two size fractions (>333 μm and between 20 and 333 μm); filters were then imaged, and microfiber masses were calculated. Across all treatments, the recovered microfiber mass per garment ranged from approximately 0 to 2 g, or exceeding 0.3% of the unwashed garment mass. Microfiber masses from top-load machines were approximately 7 times those from front-load machines; garments mechanically aged via a 24 h continuous wash had increased mass release under the same wash protocol as new garments. When published wastewater treatment plant influent characterization and microfiber removal studies are considered, washing synthetic jackets or sweaters as per this study would account for most microfibers entering the environment.

Evaporative Cooling and Dehumidification Garment for Portable Life Support Systems

NASA Technical Reports Server (NTRS)

Izenson, Michael; Chen, Weibo; Bue, Grant

2013-01-01

This paper describes the design and development of an innovative thermal and humidity control system for future space suits. The system comprises an evaporation cooling and dehumidification garment (ECDG) and a lithium chloride absorber radiator (LCAR). The ECDG absorbs heat and water vapor from inside the suit pressure garment, while the LCAR rejects heat to space without venting water vapor. The ECDG is built from thin, flexible patches with coversheets made of non-porous, water-permeable membranes that -enclose arrays of vapor flow passages. Water vapor from inside the spacesuit diffuses across the water permeable membranes, enters the vapor flow channels, and then flows to the LCAR, thus dehumidifying the internal volume of the space suit pressure garment. Additional water evaporation inside the ECDG provides cooling for sensible heat loads. -The heat released from condensation and absorption in the LCAR is rejected to the environment by thermal radiation. We have assembled lightweight and flexible ECDG pouches from prototypical materials and measured their performance in a series of separate effects tests under well-controlled, prototypical conditions. Sweating hot plate tests at typical space suit pressures show that ECDG pouches can absorb over 60 W/ft of latent heat and 20 W/ft of sensible heat from the pressure garment environment. These results are in good agreement with the predictions of our analysis models.

Space Wear Vision -Development of a Wardrobe for Life in Space Vehicles and Habitats

NASA Technical Reports Server (NTRS)

Orndorff, Evelyne

2015-01-01

A new vision is needed for the development of a wardrobe for NASA's journey to Mars in the 2030s. All human space missions require significant logistical mass and volume that add an unprecedented burden on long-duration missions beyond low-Earth orbit. The logistical burden is at least twice as great for prolonged exploration and settlements on planetary surfaces compared to missions in low-Earth orbit. The space wear vision is to design apparel that uniquely meets criteria and constraints for sustaining human presence in space. For long duration missions without landing on planetary surface, humans can use only what they carry in their spacecraft, while for settlements, additional resources may be available. The immediate space wear goal is to develop those elements needed for prolonged manned exploration beyond low Earth orbit. Three major objectives have been identified for achieving this goal: satisfying crew preferences, logistics reduction and repurposing, and systems integration. Garments must be comfortable, durable, safe to wear, and aesthetically pleasing. In addition, with limited cleaning resources, garments must be developed to reduce the logistical burden by reducing clothing mass and extending clothing wear. Furthermore, garments must have minimal impact on the life support systems of spacecraft. The approach to achieving the immediate space wear goal is to conduct multiple studies on Earth and on the International Space Station (ISS), thus laying out the path for finding materials and designing garments that meet the three objectives of prolonged manned exploration. Several studies have been undertaken recently for the first time, namely, to ascertain garment length of wear and to assess the acceptance of such extended wear. Most garments in these studies have been exercise T-shirts and shorts, and routine-wear T-shirts. Eleven studies have been completed: five studies of exercise T-shirts, three of exercise shorts, two of routine wear T-shirts, and one of shirts used as sleep-wear. The IVA (Intra Vehicular Activity) Clothing Study has been the first study with Roscosmos under the "Utilization Sharing Plan On-Board ISS," while the other studies have been conducted at the Johnson Space Center in a controlled environment similar to the ISS. For exercise clothing, study participants wore garments during aerobic exercise. For routine wear clothing, study participants wore the T-shirts daily in an office or laboratory. Daily questionnaires collected data on ordinal preferences of nine sensory elements and on reasons for retiring a used garment. More studies have been initiated on Earth, and some should be planned to engage more astronauts and cosmonauts in the design of the new space wear. Future studies will extend to other types of garments in the wardrobe; another will address microbial growth on textiles. Others will address cleaning and sanitation of clothing in space vehicles. Efforts will be made for additional ISS studies with NASA's international partners.

PHYSIOLOGICAL EVALUATION OF A FREE-FLOODING DIVER HEAT REPLACEMENT GARMENT.

DTIC Science & Technology

The general capabilities of a free-flooding heat replacement garment in maintaining thermal comfort in 40F water, at both surface and deep diving...recorded. Suit inlet temperatures which produce a subjective response of thermal comfort by the diver (Comfort Zone Inlet Temperature) at various flow

16 CFR 300.29 - Garments or products composed of or containing miscellaneous cloth scraps.

Code of Federal Regulations, 2013 CFR

2013-01-01

... containing miscellaneous cloth scraps. 300.29 Section 300.29 Commercial Practices FEDERAL TRADE COMMISSION... Labeling § 300.29 Garments or products composed of or containing miscellaneous cloth scraps. (a) For wool products which consist of, or are made from, miscellaneous cloth scraps comprising manufacturing by...

16 CFR 300.29 - Garments or products composed of or containing miscellaneous cloth scraps.

Code of Federal Regulations, 2014 CFR

2014-01-01

... containing miscellaneous cloth scraps. 300.29 Section 300.29 Commercial Practices FEDERAL TRADE COMMISSION... Labeling § 300.29 Garments or products composed of or containing miscellaneous cloth scraps. (a) For wool products which consist of, or are made from, miscellaneous cloth scraps comprising manufacturing by...

16 CFR 300.29 - Garments or products composed of or containing miscellaneous cloth scraps.

Code of Federal Regulations, 2012 CFR

2012-01-01

... containing miscellaneous cloth scraps. 300.29 Section 300.29 Commercial Practices FEDERAL TRADE COMMISSION... Labeling § 300.29 Garments or products composed of or containing miscellaneous cloth scraps. (a) For wool products which consist of, or are made from, miscellaneous cloth scraps comprising manufacturing by...

16 CFR 300.29 - Garments or products composed of or containing miscellaneous cloth scraps.

Code of Federal Regulations, 2010 CFR

2010-01-01

... containing miscellaneous cloth scraps. 300.29 Section 300.29 Commercial Practices FEDERAL TRADE COMMISSION... Labeling § 300.29 Garments or products composed of or containing miscellaneous cloth scraps. (a) For wool products which consist of, or are made from, miscellaneous cloth scraps comprising manufacturing by...

16 CFR 300.29 - Garments or products composed of or containing miscellaneous cloth scraps.

Code of Federal Regulations, 2011 CFR

2011-01-01

... containing miscellaneous cloth scraps. 300.29 Section 300.29 Commercial Practices FEDERAL TRADE COMMISSION... Labeling § 300.29 Garments or products composed of or containing miscellaneous cloth scraps. (a) For wool products which consist of, or are made from, miscellaneous cloth scraps comprising manufacturing by...

English-in-the-Workplace for Garment Workers: A Feminist Project?

ERIC Educational Resources Information Center

Harper, Helen; And Others

1996-01-01

Examines the connection between an English-in-the-workplace (EWP) class and the linguistic behavior of immigrant women garment factory employees. Results suggest that newly acquired English skills may be reinforcing linguistic behavior that reconstitutes traditional relations between workers and management. However, EWP does not appear to empower…

Custom Sewing, Modules One, Two, and Three. Instructor Guide.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This document consists of three modules designed for a custom apparel and garment sewing program teaching students to construct, alter, and prepare garments and home fashions to customer specifications. Each module includes some or all of the following components: performance objectives, lesson plans, suggested activities, information sheets,…

Stretch Garment Dermatitis

PubMed Central

Mihan, Richard; Ayres, Samuel

1968-01-01

A disease of the skin, not hitherto described, is caused by pressure or tension on the skin from the wearing of tight-fitting stretch garments such as “stretch bras,” “stretch girdles” and “stretch socks.” The condition is not due to chemical sensitization of fabrics, dyes or other additives but is of mechanical origin. The eruption may assume various clinical forms and may be characterized by a nondescript erythematous and eczematous appearance or may consist of an exaggeration, in the areas covered by the stretch garment, of already existing dermatosis such as lichen planus, psoriasis, acne vulgaris, discoid lupus erythematosus or atopic dermatitis. ImagesFigure 1.Figure 2.Figure 3.Figure 4.Figure 5. PMID:5639939

Running functional sport vest and short for e-textile applications

NASA Astrophysics Data System (ADS)

Baskan, H.; Acikgoz, H.; Atakan, R.; Eryuruk, H.; Akalın, N.; Kose, H.; Li, Y.; Kursun Bahadir, S.; Kalaoglu, F.

2017-10-01

Sports garments with functional properties have become crucial as well as comfort properties since they improve the wearer performance. For this reason, sport vest and short having high elastic recovery with fall detection sensor, were designed and produced by using flat-bed knitting machine. Comfort properties of short and vest were tested with several test instruments and; tensile strength of elastomeric yarn, air permeability, moisture management, drape and objective handle (FAST tests) of garments were achieved. It was proved that short and vest samples have good comfort properties as a functional sport garment. It was also tested that fall-detection sensor can work efficiently by using a mobile phone application.

Transition to adulthood of female garment-factory workers in Bangladesh.

PubMed

Amin, S; Diamond, I; Naved, R T; Newby, M

1998-06-01

This article examines data from a study on garment-factory workers in Bangladesh to explore the implications of work for the early socialization of young women. For the first time, large numbers of young Bangladeshi women are being given an alternative to lives in which they move directly from childhood to adulthood through early marriage and childbearing. Employment creates a period of transition in contrast to the abrupt assumption of adult roles at very young ages that marriage and childbearing mandate. This longer transition creates a period of adolescence for young women working in the garment sector that is shown to have strong implications for the women's long-term reproductive health.

The Process and the Product: Two English Classes Develop Materials.

ERIC Educational Resources Information Center

Nettle, Mary Ellen

1982-01-01

English classes conducted for two groups of women, garment factory workers and building cleaners, are compared. The garment workers interviewed each other and produced a slide-tape program. The cleaners produced a song about their work and in the process, developed awareness of the work situation, and a sense of cooperation. (MSE)

National Workplace Literacy Program (NWLP) at Chinatown Manpower Project, Inc. Final Performance Report.

ERIC Educational Resources Information Center

Tse, Ivy Au

The Chinatown Manpower Project continued as the education partner in a Workplace Literacy Program (WLP) for the Chinese garment workers in New York City. Local 23-25, Union of Needletrades, Industrial and Textile Employees, was the union partner; the Greater Blouse, Skirt & Undergarment Association, Inc., and the Continental Garment Manufacturers…

Women Learning in Garment Work: Solidarity and Sociality

ERIC Educational Resources Information Center

Fenwick, Tara

2008-01-01

This article explores processes and possibilities for critical learning in the workplace, with a focus on workers laboring in what are often exploitive and dehumanizing conditions. The argument is based on a study of work-life learning of women, mostly new immigrants, employed long-term at an Alberta garment manufacturing plant. It is argued that…

An overview of the use of compression in lower-limb chronic oedema.

PubMed

Elwell, Rebecca

2016-01-01

Chronic oedema in the lower limbs can be a debilitating condition and has a negative effect on a patient's quality of life. As yet, there is no known cure for this condition; however, it can be controlled and managed, and its recurrence can be prevented. One of the most common and successful ways of managing this condition is the use of compression hosiery. With an expanding knowledge base of compression hosiery, lymphoedema specialists are now able to address historical problems of poor fit and concordance. Moreover, there is a wide choice of garments available today for clinicians to use, that not only help to control and treat the oedema, but have also improved patients' quality of life because the garments are comfortable and inconspicuous. Evidence has shown that concordance is greatly increased when patients participate in their treatment and help to decide on the most suitable garment for themselves. This article gives an overview of the use of compression garments when treating lower-limb chronic oedema in patients, and explains the aspects to bear in mind when choosing and prescribing compression hosiery.

Questionnaire for low back pain in the garment industry workers

PubMed Central

Bindra, Supreet; Sinha, A. G. K.; Benjamin, A. I.

2013-01-01

Low back pain affects up to 90% of the world's population at some point in their lives. Until date no questionnaire has been designed for back pain in the garment industry workers. Therefore, the objective of this study is to design a questionnaire to determine the prevalence, risk factors, impact, health care service utilization and back pain features in the garment industry workers and gain preliminary experience of its use. The content validity and reliability of the questionnaire was established. Items showing acceptable internal consistency and moderate to high test re-test reliability were retained in the questionnaire. Items showing unacceptable internal consistency, low test re-test reliability or poor differentiation were reworded, redrafted and re-tested on the workers. It took 20 min to complete one interview schedule. Environmental factors such as the absence of the garment industry owner/supervisor or co-workers at the time of the interview and interview during leisure hours need to be standardized. Thus, final questionnaire is ready for use after necessary amendments and will be used on the larger sample size in the main study. PMID:24421591

Questionnaire for low back pain in the garment industry workers.

PubMed

Bindra, Supreet; Sinha, A G K; Benjamin, A I

2013-05-01

Low back pain affects up to 90% of the world's population at some point in their lives. Until date no questionnaire has been designed for back pain in the garment industry workers. Therefore, the objective of this study is to design a questionnaire to determine the prevalence, risk factors, impact, health care service utilization and back pain features in the garment industry workers and gain preliminary experience of its use. The content validity and reliability of the questionnaire was established. Items showing acceptable internal consistency and moderate to high test re-test reliability were retained in the questionnaire. Items showing unacceptable internal consistency, low test re-test reliability or poor differentiation were reworded, redrafted and re-tested on the workers. It took 20 min to complete one interview schedule. Environmental factors such as the absence of the garment industry owner/supervisor or co-workers at the time of the interview and interview during leisure hours need to be standardized. Thus, final questionnaire is ready for use after necessary amendments and will be used on the larger sample size in the main study.

Musculoskeletal symptoms among female garment factory workers in Sri Lanka.

PubMed

Lombardo, Sarah R; Vijitha de Silva, P; Lipscomb, Hester J; Ostbye, Truls

2012-01-01

To assess the prevalence of musculoskeletal symptoms and their association with sociodemographic risk factors among female garment factory workers in Sri Lanka. 1058 randomly selected female garment factory workers employed in the free trade zone of Kogalla, Sri Lanka were recruited to complete two interviewer-administered questionnaires assessing musculoskeletal symptoms and health behaviors. Musculoskeletal complaints among female garment workers in the FTZ of Kogalla are less common than expected. Sociocultural factors may have resulted in underreporting and similarly contribute to the low rates of healthcare utilization by these women. 164 (15.5%) of workers reported musculoskeletal symptoms occurring more than 3 times or lasting a week or more during the previous 12-month period. Back (57.3%) and knee (31.7%) were the most common sites of pain. Although most symptomatic women reported that their problems interfered with work and leisure activities, very few missed work as a result of their pain. Prevalence correlated positively with increased age and industry tenure of less than 12 months. Job type, body mass index, and education were not significant predictors of musculoskeletal symptoms.

Multicompartment Liquid-Cooling/Warming Protective Garments

NASA Technical Reports Server (NTRS)

Koscheyev, Victor S.; Leon, Gloria R.; Dancisak, Michael J.

2005-01-01

Shortened, multicompartment liquid-cooling / warming garments (LCWGs) for protecting astronauts, firefighters, and others at risk of exposure to extremes of temperature are undergoing development. Unlike prior liquid-circulation thermal-protection suits that provide either cooling or warming but not both, an LCWG as envisioned would provide cooling at some body locations and/or heating at other locations, as needed: For example, sometimes there is a need to cool the body core and to heat the extremities simultaneously. An LCWG garment of the type to be developed is said to be shortened because the liquid-cooling and - heating zones would not cover the whole body and, instead, would cover reduced areas selected for maximum heating and cooling effectiveness. Physiological research is under way to provide a rational basis for selection of the liquid-cooling and -heating areas. In addition to enabling better (relative to prior liquid-circulation garments) balancing of heat among different body regions, the use of selective heating and cooling in zones would contribute to a reduction in the amount of energy needed to operate a thermal-protection suit.

The development of an elastic reverse gradient garment to be used as a countermeasure for cardiovascular deconditioning

NASA Technical Reports Server (NTRS)

Annis, J. F.; Webb, P.

1973-01-01

Using a new Nomex-Lycra elastic fabric and individualized garment engineering techniques, reverse gradient garments (RGG's) were designed, constructed, and tested for effectiveness as a countermeasure against cardiovascular deconditioning. By combining torso-compensated positive pressure breathing with a distally diminishing gradient of counterpressure supplied by the elastic fabric on the limbs, the RGG acts to pool blood in the extremities of recumbent persons much as though they were standing erect in 1 g. It was theorized that through the use of a dynamic pressurization scheme, the RGG would stress the vasculature in a fashion similar to that experienced by the noramlly active man, hence preventing or limiting the development of post-weightlessness orthostatic intolerance and related conditions. Four male, college-age subjects received daily treatments with the RGG during a 15-day bedrest study. Four additional subjects also underwent the bedrest, but received no treatments; they served as controls. The design and construction of the garments are described, and results of the treatment related measurements are given.

Approach for Mitigating Pressure Garment Design Risks in a Mobile Lunar Surface Systems Architecture

NASA Technical Reports Server (NTRS)

Aitchison, Lindsay

2009-01-01

The stated goals of the 2004 Vision for Space Exploration focus on establishing a human presence throughout the solar system beginning with the establishment of a permanent human presence on the Moon. However, the precise objectives to be accomplished on the lunar surface and the optimal system architecture to achieve those objectives have been a topic of much debate since the inception of the Constellation Program. There are two basic styles of system architectures being traded at the Programmatic level: a traditional large outpost that would focus on techniques for survival off our home planet and a greater depth of exploration within one area, or a mobile approach- akin to a series of nomadic camps- that would allow greater breadth of exploration opportunities. The traditional outpost philosophy is well within the understood pressure garment design space with respect to developing interfaces and operational life cycle models. The mobile outpost, however, combines many unknowns with respect to pressure garment performance and reliability that could dramatically affect the cost and schedule risks associated with the Constellation space suit system. This paper provides an overview of the concepts being traded for a mobile architecture from the operations and hardware implementation perspective, describes the primary risks to the Constellation pressure garment associated with each of the concepts, and summarizes the approach necessary to quantify the pressure garment design risks to enable the Constellation Program to make informed decisions when deciding on an overall lunar surface systems architecture.

Clinical and cost effectiveness evaluation of low friction and shear garments.

PubMed

Smith, G; Ingram, A

2010-12-01

To determine the effectiveness of Parafricta low-friction garments in reducing the incidence and prevalence of pressure ulceration and to evaluate the curative aspects of these products on pre-existing skin breakdown within a hospital setting. Patients with a Waterlow score of >15 and who were unable to reposition independently were offered the low-friction undergarments and bootees. A total of 650 patient cases were initially reviewed. Of these, 204 met the criteria for use of the products in the 3 months prior to the start of the evaluation (cohort 1) and 165 patients met the criteria during the period when the garments were used (cohort 2). Data collected included pressure ulcer incidence, location, grading, and outcome of ulcer on discharge. Locally derived costs for length of stay, wound dressings, pressure-redistributing mattresses and additional cost of the low-friction garments were applied to build a cost-effectiveness model. In patients at risk of skin breakdown there was a statistically significant reduction in the number of patients who developed pressure ulcers following use of the low-friction garments in cohort 2 when compared with cohort 1 (16% reduction; p = 0.0286). In addition, the number of patients who were ulcer free on admission but who developed ulcers and then improved or completely healed before discharge was also statistically significant (41% increase; p = 0.0065) when cohort 2 was compared with cohort 1. Fewer patients admitted with ulcers deteriorated when using the low-friction garments (21% reduction; p = 0.0012). The costs, which were calculated by comparing patient throughput for these patients, suggest that the savings associated with preventing skin breakdown outweighed the cost of the products used (base case model indicated a saving of over £63,000 per 100 at risk patients). The results support the conclusion that low-friction garment products have a role to play in the prevention of skin breakdown, and appear to be both clinically effective and cost effective. The authors have no conflicts of interest to declare. APA Parafricta provided the products, as well as financial support for training of the ward staff who participated in the evaluation and for the data collection and analysis (which was performed by Xcelerate Health Outcomes Unit, NHS Innovations London).

Melding Vapor-Phase Organic Chemistry and Textile Manufacturing To Produce Wearable Electronics.

PubMed

Andrew, Trisha L; Zhang, Lushuai; Cheng, Nongyi; Baima, Morgan; Kim, Jae Joon; Allison, Linden; Hoxie, Steven

2018-04-17

Body-mountable electronics and electronically active garments are the future of portable, interactive devices. However, wearable devices and electronic garments are demanding technology platforms because of the large, varied mechanical stresses to which they are routinely subjected, which can easily abrade or damage microelectronic components and electronic interconnects. Furthermore, aesthetics and tactile perception (or feel) can make or break a nascent wearable technology, irrespective of device metrics. The breathability and comfort of commercial fabrics is unmatched. There is strong motivation to use something that is already familiar, such as cotton/silk thread, fabrics, and clothes, and imperceptibly adapt it to a new technological application. (24) Especially for smart garments, the intrinsic breathability, comfort, and feel of familiar fabrics cannot be replicated by devices built on metalized synthetic fabrics or cladded, often-heavy designer fibers. We propose that the strongest strategy to create long-lasting and impactful electronic garments is to start with a mass-produced article of clothing, fabric, or thread/yarn and coat it with conjugated polymers to yield various textile circuit components. Commonly available, mass-produced fabrics, yarns/threads, and premade garments can in theory be transformed into a plethora of comfortably wearable electronic devices upon being coated with films of electronically active conjugated polymers. The definitive hurdle is that premade garments, threads, and fabrics have densely textured, three-dimensional surfaces that display roughness over a large range of length scales, from microns to millimeters. Tremendous variation in the surface morphology of conjugated-polymer-coated fibers and fabrics can be observed with different coating or processing conditions. In turn, the morphology of the conjugated polymer active layer determines the electrical performance and, most importantly, the device ruggedness and lifetime. Reactive vapor coating methods allow a conjugated polymer film to be directly formed on the surface of any premade garment, prewoven fabric, or fiber/yarn substrate without the need for specialized processing conditions, surface pretreatments, detergents, or fixing agents. This feature allows electronic coatings to be applied at the end of existing, high-throughput textile and garment manufacturing routines, irrespective of dye content or surface finish of the final textile. Furthermore, reactive vapor coating produces conductive materials without any insulating moieties and yields uniform and conformal films on fiber/fabric surfaces that are notably wash- and wear-stable and can withstand mechanically demanding textile manufacturing routines. These unique features mean that rugged and practical textile electronic devices can be created using sewing, weaving, or knitting procedures without compromising or otherwise affecting the surface electronic coating. In this Account, we highlight selected electronic fabrics and garments created by melding reactive vapor deposition with traditional textile manipulation processes, including electrically heated gloves that are lightweight, breathable, and sweat-resistant; surface-coated cotton, silk, and bast fiber threads capable of carrying large current densities and acting as sewable circuit interconnects; and surface-coated nylon threads woven together to form triboelectric textiles that can convert surface charge created during small body movements into usable and storable power.

Cost of Health Education to Increase STD Awareness in Female Garment Workers in Bangladesh

ERIC Educational Resources Information Center

Rianon, Nahid; Selwyn, Beatrice; Shahidullah, S. M.; Swint, J. Michael; Franzini, Luisa; Rasu, Rafia

2009-01-01

Risk of sexually transmitted diseases (STDs) and the need for health education in the female garment workers in Bangladesh have been emphasized in the past. Interventions were more acceptable when considered cost-effective. This preliminary study reported on the cost-effectiveness of a health education program that successfully improved knowledge…

The Three-Year (1995-1997) Workplace Literacy Program at Chinatown Manpower Project, Inc. Final Evaluation.

ERIC Educational Resources Information Center

Friedenberg, Joan E.

An external evaluation was conducted of the Workplace Literacy Program at Chinatown Manpower Project, Inc., which provided oral and written job-specific instruction in English as a second language to Chinese garment workers. The program was designed for underemployed garment industry workers with low English proficiency, including seamstresses,…

"No One Ever Showed Me Nothing": Skill and Self-Making among Trinidadian Garment Workers

ERIC Educational Resources Information Center

Prentice, Rebecca

2012-01-01

This article examines the relationship between skill acquisition and the constitution of economic selfhood in Trinidad. Drawing on ethnographic fieldwork among garment workers in a context of industrial decline, I show how their formal, informal, and illicit means of acquiring sewing skills are inextricably linked to the fragmented and unstable…

From Theory to Practice: A Set of Garment-Related ESL Curriculum.

ERIC Educational Resources Information Center

Chan, Ha Yin

This document describes how a set of workplace literacy curricula was developed for Chinese garment workers in New York City. First, it discusses the goal of the workplace literacy program and the nature of the population served. Then, it proceeds to discuss rationale and research procedures of how the curriculum was being developed. A set of…

[Student Magazine of the ESL Classes of the International Ladies' Garment Workers' Union (ILGWU).

ERIC Educational Resources Information Center

Alvarez, Manuel, Ed.; Zetino, Alfredo, Ed.

This student magazine created by the English-as-a-Second-Language (ESL) classes of the International Ladies' Garment Workers' Union (ILGWU) is a collection of personal opinions, reports, and creative writing with illustrations. Each item was written as a voluntary collaboration, homework, or classwork. Items include poems, letters, accounts of…

78 FR 57808 - Rules and Regulations Under the Wool Products Labeling Act of 1939

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-20

... decorative thread in a garment or . . . where the presence of wool is insignificant.'' \\19\\ \\17\\ AAFA (5... the manufacturing process in the foreign country and in the United States.\\56\\ \\56\\ This provision... need for declaring the wool content when we find wool in a decorative thread in a garment or similar...

English for Specific Purposes: A Case Study in an Industrial Setting.

ERIC Educational Resources Information Center

Alexander, Clare

A course outline and sample materials for a course in English for garment workshop employees in New York are presented, and theoretical considerations in establishing an English for specific purposes (ESP) course are explored. Attention is directed to the needs analysis process undertaken in the garment industry. Specifically, ESP is used to mean…

National Workplace Literacy Program. Garment-Related Bilingual (English & Chinese) T.V. Broadcast Lessons. Book I: Episodes 1-15.

ERIC Educational Resources Information Center

Chinatown Manpower Project, Inc., New York, NY.

This publication contains a series of 15 garment-related bilingual (English and Chinese) television broadcast lessons produced by the National Workplace Literacy Program of Chinatown Manpower Project, Inc. (Other partners were the Union of Needletrades, Industrial and Textile Employees and the Greater Blouse, Skirt and Undergarment Association in…

System of error detection in the manufacture of garments using artificial vision

NASA Astrophysics Data System (ADS)

Moreno, J. J.; Aguila, A.; Partida, E.; Martinez, C. L.; Morales, O.; Tejeida, R.

2017-12-01

A computer vision system is implemented to detect errors in the cutting stage within the manufacturing process of garments in the textile industry. It provides solution to errors within the process that cannot be easily detected by any employee, in addition to significantly increase the speed of quality review. In the textile industry as in many others, quality control is required in manufactured products and this has been carried out manually by means of visual inspection by employees over the years. For this reason, the objective of this project is to design a quality control system using computer vision to identify errors in the cutting stage within the garment manufacturing process to increase the productivity of textile processes by reducing costs.

Simulation modelling of central order processing system under resource sharing strategy in demand-driven garment supply chains

NASA Astrophysics Data System (ADS)

Ma, K.; Thomassey, S.; Zeng, X.

2017-10-01

In this paper we proposed a central order processing system under resource sharing strategy for demand-driven garment supply chains to increase supply chain performances. We examined this system by using simulation technology. Simulation results showed that significant improvement in various performance indicators was obtained in new collaborative model with proposed system.

National Workplace Literacy Program. Garment-Related Bilingual (English and Chinese) Broadcast Lessons. Book 1 and 2.

ERIC Educational Resources Information Center

Chan, Ha Yin

A compilation of transcripts of 100 bilingual English/Chinese broadcast lessons for workers in the garment industry is presented. The lessons are part of the New York Chinatown Manpower Project's Workplace Literacy Program. With the support of the Sino Radio Broadcast Corporation, the lessons are broadcast daily in the morning and again after the…

Advanced Extra-Vehicular Activity Pressure Garment Requirements Development

NASA Technical Reports Server (NTRS)

Ross, Amy; Aitchison, Lindsay; Rhodes, Richard

2015-01-01

The NASA Johnson Space Center advanced pressure garment technology development team is addressing requirements development for exploration missions. Lessons learned from the Z-2 high fidelity prototype development have reiterated that clear low-level requirements and verification methods reduce risk to the government, improve efficiency in pressure garment design efforts, and enable the government to be a smart buyer. The expectation is to provide requirements at the specification level that are validated so that their impact on pressure garment design is understood. Additionally, the team will provide defined verification protocols for the requirements. However, in reviewing exploration space suit high level requirements there are several gaps in the team's ability to define and verify related lower level requirements. This paper addresses the efforts in requirement areas such as mobility/fit/comfort and environmental protection (dust, radiation, plasma, secondary impacts) to determine the method by which the requirements can be defined and use of those methods for verification. Gaps exist at various stages. In some cases component level work is underway, but no system level effort has begun; in other cases no effort has been initiated to close the gap. Status of on-going efforts and potential approaches to open gaps are discussed.

Scale factor management in the studies of affine models of shockproof garment elements

NASA Astrophysics Data System (ADS)

Denisov, Oleg; Pleshko, Mikhail; Ponomareva, Irina; Merenyashev, Vitaliy

2018-03-01

New samples of protective garment for performing construction work at height require numerous tests in conditions close to real conditions of extreme vital activity. The article presents some results of shockproof garment element studies and a description of a patented prototype. The tests were carried out on a model which geometric dimensions were convenient for manufacturing it in a limited batch. In addition, the used laboratory equipment (for example, a unique power pendulum), blanks made of a titanium-nickel alloy with a shape memory effect also imposed their limitations. The problem of the adequacy of the obtained experimental results transfer to mass-produced products was solved using tools of the classical similarity theory. Scale factor management influence in the affine modeling of the shockproof element, studied on the basis of the equiatomic titanium-nickel alloy with the shape memory effect, allowed us to assume, with a sufficient degree of reliability, the technical possibility of extrapolating the results of experimental studies to full-scale objects for the formation of the initial data of the mathematical model of shockproof garment dynamics elastoplastic deformation (while observing the similarity of the features of external loading).

Loss of effectiveness of protective clothing after its use in pesticide sprays and its multiple washes.

PubMed

Espanhol-Soares, Melina; Teodoro de Oliveira, Manuela; Machado-Neto, Joaquim Gonçalves

2017-02-01

Protective clothing is used as a barrier against pesticides when working with agricultural sprays. The aim of this study was to evaluate the pesticide penetration, retention, and repellence of the material and seams of a whole-body protective garment used by applicators of pesticides. The efficiency of the material and seams of the whole-body garment were determined for its classification as proposed by ISO 27065 (ISO, 2011). The evaluation method used was the pipette test of ISO 22608. The efficiency of the material and seams of the garment (100% cotton) were tested by contamination with formulations of Roundup Original® SL; Nufos EC® and Supera SC®. The presence of the seams in the protective clothing reduced its efficiency in the control of dermal exposure, except when protecting against the Supera SC® formulation. The number of washes and uses affected the efficiency of the material and seams of the garment. The type of formulation interfered significantly in the penetration of pesticides into the material and seams. Thus, the laboratory efficiency assessment of protective clothing is necessary to determine what types of formulations and use conditions are appropriate for workers.

Wearable kinesthetic system for capturing and classifying upper limb gesture in post-stroke rehabilitation.

PubMed

Tognetti, Alessandro; Lorussi, Federico; Bartalesi, Raphael; Quaglini, Silvana; Tesconi, Mario; Zupone, Giuseppe; De Rossi, Danilo

2005-03-02

BACKGROUND: Monitoring body kinematics has fundamental relevance in several biological and technical disciplines. In particular the possibility to exactly know the posture may furnish a main aid in rehabilitation topics. In the present work an innovative and unobtrusive garment able to detect the posture and the movement of the upper limb has been introduced, with particular care to its application in post stroke rehabilitation field by describing the integration of the prototype in a healthcare service. METHODS: This paper deals with the design, the development and implementation of a sensing garment, from the characterization of innovative comfortable and diffuse sensors we used to the methodologies employed to gather information on the posture and movement which derive from the entire garments. Several new algorithms devoted to the signal acquisition, the treatment and posture and gesture reconstruction are introduced and tested. RESULTS: Data obtained by means of the sensing garment are analyzed and compared with the ones recorded using a traditional movement tracking system. CONCLUSION: The main results treated in this work are summarized and remarked. The system was compared with a commercial movement tracking system (a set of electrogoniometers) and it performed the same accuracy in detecting upper limb postures and movements.

Influence of different types of compression garments on exercise-induced muscle damage markers after a soccer match.

PubMed

Marqués-Jiménez, Diego; Calleja-González, Julio; Arratibel-Imaz, Iñaki; Delextrat, Anne; Uriarte, Fernando; Terrados, Nicolás

2018-01-01

There is not enough evidence of positive effects of compression therapy on the recovery of soccer players after matches. Therefore, the objective was to evaluate the influence of different types of compression garments in reducing exercise-induced muscle damage (EIMD) during recovery after a friendly soccer match. Eighteen semi-professional soccer players (24 ± 4.07 years, 177 ± 5 cm; 71.8 ± 6.28 kg and 22.73 ± 1.81 BMI) participated in this study. A two-stage crossover design was chosen. Participants acted as controls in one match and were assigned to an experimental group (compression stockings group, full-leg compression group, shorts group) in the other match. Participants in experimental groups played the match wearing the assigned compression garments, which were also worn in the 3 days post-match, for 7 h each day. Results showed a positive, but not significant, effect of compression garments on attenuating EIMD biomarkers response, and inflammatory and perceptual responses suggest that compression may improve physiological and psychological recovery.

A novel medical bandage with enhanced clothing comfort

NASA Astrophysics Data System (ADS)

Oğlakcioğlu, N.; Sari, B.; Bedez Üte, T.; Marmarali, A.

2016-07-01

Compression garments are special textile products which apply a pressure on needed body zones for supporting medical, sport or casual activities. Medical bandages are a group of these garments and they have a very common usage for compression effect on legs or arms. These bandages are generally produced by using synthetic raw materials such as polyamide or polyester fibres. Medical bandages are in contact with skin. Even if the synthetic fibres are used, they may cause both comfort and health problems like allergies. Nowadays in textile sector, the expectations of clients include using of natural fibres as far as possible in all garments. Natural fibres have good advantages such as breathability, softness, moisture management ability, non-allergenic and ecologic structure and these characteristics present optimum utilization conditions. In this study, tubular medical bandages were manufactured by using core spun yarns (sheath fibres are selected as tencel, bamboo and cotton, core material is elastane) and their pressure and comfort (air and water vapour permeability) characteristics were investigated. The results indicated that the bandages have good comfort abilities beside adequate pressure values for compression effect. These garments can constitute a new production field for medical bandages with their comfort properties in addition to pressure characteristics.

Advanced Exploration Systems (AES) Logistics Reduction and Repurposing Project: Advanced Clothing Ground Study Final Report

NASA Technical Reports Server (NTRS)

Byrne, Vicky; Orndoff, Evelyne; Poritz, Darwin; Schlesinger, Thilini

2013-01-01

All human space missions require significant logistical mass and volume that will become an excessive burden for long duration missions beyond low Earth orbit. The goal of the Advanced Exploration Systems (AES) Logistics Reduction & Repurposing (LRR) project is to bring new ideas and technologies that will enable human presence in farther regions of space. The LRR project has five tasks: 1) Advanced Clothing System (ACS) to reduce clothing mass and volume, 2) Logistics to Living (L2L) to repurpose existing cargo, 3) Heat Melt Compactor (HMC) to reprocess materials in space, 4) Trash to Gas (TTG) to extract useful gases from trash, and 5) Systems Engineering and Integration (SE&I) to integrate these logistical components. The current International Space Station (ISS) crew wardrobe has already evolved not only to reduce some of the logistical burden but also to address crew preference. The ACS task is to find ways to further reduce this logistical burden while examining human response to different types of clothes. The ACS task has been broken into a series of studies on length of wear of various garments: 1) three small studies conducted through other NASA projects (MMSEV, DSH, HI-SEAS) focusing on length of wear of garments treated with an antimicrobial finish; 2) a ground study, which is the subject of this report, addressing both length of wear and subject perception of various types of garments worn during aerobic exercise; and 3) an ISS study replicating the ground study, and including every day clothing to collect information on perception in reduced gravity in which humans experience physiological changes. The goal of the ground study is first to measure how long people can wear the same exercise garment, depending on the type of fabric and the presence of antimicrobial treatment, and second to learn why. Human factors considerations included in the study consist of the Institutional Review Board approval, test protocol and participants' training, and a web-based data collection questionnaire. Cardiovascular exercise was chosen as the activity in this experiment for its profuse sweating effect and because it is considered a more severe treatment applied to the clothes than every-day usage. Study garments were exercise T-shirts and shorts purchased from various vendors. Fabric construction, fabric composition, and finishing treatment were defined as the key variables. The study was divided into three balanced experiments: a cotton-polyester-wool (CPW) T-shirts study with 61 participants, a polyester-modacrylic-polyester/cocona (PMC) T-shirts study with 40 participants, and a shorts study with 70 participants. In the CPW study, the T-shirts were made of 100% cotton, or of 100% polyester or of 100% wool, and categorized into open and tight knit constructions. In the PMC study, the T-shirts were made of 100% polyester, or of 82% modacrylic, or of 95% polyester with 5% cocona fiber, without construction distinction. The shorts were made either of 100% cotton or of 100% polyester, and were knitted or woven. Some garments were treated with Bio-Protect 500 antimicrobial finish according to the experimental design. The data collected from the questionnaire included garment identification, level of exertion, duration of exercise session, number of exercise sessions, an ordinal preference scale for nine sensory elements, and reason for retiring a used garment. From the analysis of the combined CPW and PMC shirt studies, there are statistically significant differences among the mean lifetimes of various types of shirts. The exercise shirts with the longest mean lifetimes are untreated wool (600 minutes), treated cotton (526 minutes), and untreated modacrylic (515 minutes). From the combined CPW and PMC shirt studies, the most preferred material was untreated open-knit wool, which is one of the two materials that jointly were worn the longest, untreated wool, both open-knit and tight-knit. For the CP shorts study, there were no statistically significant differences in mean lifetimes of the exercise shorts at the 5% significance level due to the treatment combinations. There was therefore no justification to examine differences among levels of main effects or interactions. The preference for shorts was in this order: untreated woven polyester, untreated knitted polyester, untreated woven cotton, and treated knitted cotton. The nine preference scales were tabulated to determine the preference responses at the end of those exercise periods which were prior to the period when a garment was retired and a new garment was started. The assumption is that an unfavorable assessment of a garment leads to its retirement. The scent scale response was predominantly unfavorable at the end of the exercise period immediately prior to the exercise period when a new garment was started.

Randomised controlled trial of silk therapeutic garments for the management of atopic eczema in children: the CLOTHES trial.

PubMed

Thomas, Kim S; Bradshaw, Lucy E; Sach, Tracey H; Cowdell, Fiona; Batchelor, Jonathan M; Lawton, Sandra; Harrison, Eleanor F; Haines, Rachel H; Ahmed, Amina; Dean, Taraneh; Burrows, Nigel P; Pollock, Ian; Buckley, Hannah K; Williams, Hywel C; Llewellyn, Joanne; Crang, Clare; Grundy, Jane D; Guiness, Juliet; Gribbin, Andrew; Wake, Eileen V; Mitchell, Eleanor J; Brown, Sara J; Montgomery, Alan A

2017-04-01

Atopic eczema (AE) is a chronic, itchy, inflammatory skin condition that affects the quality of life of children and their families. The role of specialist clothing in the management of AE is poorly understood. To assess the effectiveness and cost-effectiveness of silk garments for the management of AE in children with moderate to severe disease. Parallel-group, observer-blind, randomised controlled trial of 6 months' duration, followed by a 2-month observational period. A nested qualitative study evaluated the beliefs of trial participants, health-care professionals and health-care commissioners about the use of silk garments for AE. Secondary care and the community in five UK centres. Children aged 1-15 years with moderate or severe AE. Participants were randomised (1 : 1 using online randomisation) to standard care or standard care plus 100% silk garments made from antimicrobially protected knitted sericin-free silk [DermaSilk TM (AlPreTec Srl, San Donà di Piave, Italy) or DreamSkin TM (DreamSkin Health Ltd, Hatfield, UK)]. Three sets of garments were supplied per participant, to be worn for up to 6 months (day and night). At 6 months the standard care group received the garments to use for the remaining 2-month observational period. Primary outcome - AE severity using the Eczema Area and Severity Index (EASI) assessed at 2, 4 and 6 months, by nurses blinded to treatment allocation. EASI scores were log-transformed for analysis. Secondary outcomes - patient-reported eczema symptoms (Patient Oriented Eczema Measure); global assessment of severity (Investigator Global Assessment); quality of life of the child (Atopic Dermatitis Quality of Life, Child Health Utility - 9 Dimensions), family (Dermatitis Family Impact Questionnaire) and main carer (EuroQoL-5 Dimensions-3 Levels); use of standard eczema treatments (e.g. emollients, topical corticosteroids); and cost-effectiveness. The acceptability and durability of the clothing, and adherence to wearing the garments, were assessed by parental/carer self-report. Safety outcomes - number of skin infections and hospitalisations for AE. A total of 300 children were randomised (26 November 2013 to 5 May 2015): 42% female, 79% white, mean age 5 years. The primary analysis included 282 out of 300 (94%) children ( n  = 141 in each group). Garments were worn for at least 50% of the time by 82% of participants. Geometric mean EASI scores at baseline, 2, 4 and 6 months were 8.4, 6.6, 6.0, 5.4 for standard care and 9.2, 6.4, 5.8, 5.4 for silk clothing, respectively. There was no evidence of difference between the groups in EASI score averaged over all follow-up visits adjusted for baseline EASI score, age and centre (ratio of geometric means 0.95, 95% confidence interval 0.85 to 1.07; p  = 0.43). This confidence interval is equivalent to a difference of -1.5 to 0.5 in the original EASI scale units. Skin infections occurred in 39 out of 141 (28%) and 36 out of 142 (25%) participants for standard care and silk clothing groups, respectively. The incremental cost per QALY of silk garments for children with moderate to severe eczema was £56,811 from a NHS perspective in the base case. Sensitivity analyses supported the finding that silk garments do not appear to be cost-effective within currently accepted thresholds. Knowledge of treatment allocation may have affected behaviour and outcome reporting for some of the patient-reported outcomes. The addition of silk garments to standard AE care is unlikely to improve AE severity, or to be cost-effective compared with standard care alone, for children with moderate or severe AE. This trial adds to the evidence base to guide clinical decision-making. Non-pharmacological interventions for the management of AE remain a research priority among patients. Current Controlled Trials ISRCTN77261365. This project was funded by the National Institute for Health Research (NIHR) Health Technology Assessment programme and will be published in full in Health Technology Assessment ; Vol. 21, No. 16. See the NIHR Journals Library website for further project information.

Advanced Design Heat PumpRadiator for EVA Suits

NASA Technical Reports Server (NTRS)

Izenson, Michael G.; Chen, Weibo; Passow, Christian; Phillips, Scott; Trevino, Luis

2009-01-01

Absorption cooling using a LiCl/water heat pump can enable lightweight and effective thermal control for EVA suits without venting water to the environment. The key components in the system are an absorber/radiator that rejects heat to space and a flexible evaporation cooling garment that absorbs heat from the crew member. This paper describes progress in the design, development, and testing of the absorber/radiator and evaporation cooling garment. New design concepts and fabrication approaches will significantly reduce the mass of the absorber/radiator. We have also identified materials and demonstrated fabrication approaches for production of a flexible evaporation cooling garment. Data from tests of the absorber/radiator s modular components have validated the design models and allowed predictions of the size and weight of a complete system.

Development of a laboratory test for knicker tearing re-creation studies.

PubMed

Carr, D J; Mitchell, J L; Niven, B E; Girvan, E; Carney, S

2016-05-01

False sexual assault and rape claims result in wasted forensic and police resources and stigma for the alleged offender. In this work a laboratory method was developed to (i) recreate the ripping of knickers and (ii) measure the force required to rip the garments. The effect of laundering was considered as a means to mimic age of garment, and the effect of speed of ripping was used as a measure of forcible removal of garments. Whilst laundering resulted in visual damage to the thongs, it did not affect the mechanical properties. Faster test speeds resulted in higher measured forces and increased levels of damage. This may allow comment to be made regarding the level of force used during an attack. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

From Classroom to Computer Screen: NWLP Software. A Set of Computerized Garment-Related Bilingual (English and Chinese) Literacy Lessons.

ERIC Educational Resources Information Center

Whu, Lin Fai; Zhang, Ai Ling

This document describes how National Workplace Literacy Program (NWLP) software was developed for Chinese garment workers in New York City. First, it discusses the goal of the workplace literacy program and the nature of the population served. Then, it indicates how NWLP software was designed to supplement the NWLP curriculum and to reinforce the…

Alkali metal protective garment and composite material

DOEpatents

Ballif, III, John L.; Yuan, Wei W.

1980-01-01

A protective garment and composite material providing satisfactory heat resistance and physical protection for articles and personnel exposed to hot molten alkali metals, such as sodium. Physical protection is provided by a continuous layer of nickel foil. Heat resistance is provided by an underlying backing layer of thermal insulation. Overlying outer layers of fireproof woven ceramic fibers are used to protect the foil during storage and handling.

The HERrespect intervention to address violence against female garment workers in Bangladesh: study protocol for a quasi-experimental trial.

PubMed

Al Mamun, Mahfuz; Parvin, Kausar; Yu, Marat; Wan, Jessica; Willan, Samantha; Gibbs, Andrew; Jewkes, Rachel; Naved, Ruchira Tabassum

2018-04-18

Women in Bangladesh experience high rates of Intimate Partner Violence (IPV). IPV is more prevalent against income earning women compared to their non-earning counterparts, and Workplace Violence (WPV) is also common. Such violence is a violation of women's rights, and also constrains them from contributing to their personal growth, household, community and the economy at large. There is limited evidence on what works to prevent IPV and WPV amongst garment workers. This paper describes an evaluation of HERrespect, an intervention which aims to reduce IPV and WPV against female garment workers in and around Dhaka, Bangladesh. The trial employs a quasi-experimental design, with four intervention and four control factories. In the intervention factories a randomly selected cohort of married female line workers, a cohort of male line workers, and all middle management staff received the intervention. The intervention strategies involved (1) gender transformative group-based training for workers and management staff; (2) joint session between workers (15 female and male) and middle-management staff; (3) factory-wide activities; (4) awareness raising among top management; (5) factory policy review and development and 6) a community based campaign. For the evaluation, a cohort of randomly selected female workers and a cohort of selected management staff have been established. All workers (n = 800) and management staff (n = 395) from these cohorts were interviewed at baseline using two different questionnaires, and will be interviewed in the endline, 24 months post-baseline. Intention to treat analysis will be used for assessing the impact of HERrespect, comparing the intervention and control factories. To our knowledge this is the first study that seeks to evaluate the impact on IPV and WPV, of group sessions with female workers, male workers, and management; factory-wide campaigns and a community intervention among female garment workers in Bangladesh. Apart from informing programmers and policy makers about intervention effectiveness in reducing IPV and WPV against female garment workers this study will also present evidence on an intervention tailored to the situation in the garment sector, which makes HERrespect scalable. ClinicalTrials.gov NCT03304015, retrospectively registered on October 06, 2017.

A Study on the Optimal Positions of ECG Electrodes in a Garment for the Design of ECG-Monitoring Clothing for Male.

PubMed

Cho, Hakyung; Lee, Joo Hyeon

2015-09-01

Smart clothing is a sort of wearable device used for ubiquitous health monitoring. It provides comfort and efficiency in vital sign measurements and has been studied and developed in various types of monitoring platforms such as T-shirt and sports bra. However, despite these previous approaches, smart clothing for electrocardiography (ECG) monitoring has encountered a serious shortcoming relevant to motion artifacts caused by wearer movement. In effect, motion artifacts are one of the major problems in practical implementation of most wearable health-monitoring devices. In the ECG measurements collected by a garment, motion artifacts are usually caused by improper location of the electrode, leading to lack of contact between the electrode and skin with body motion. The aim of this study was to suggest a design for ECG-monitoring clothing contributing to reduction of motion artifacts. Based on the clothing science theory, it was assumed in this study that the stability of the electrode in a dynamic state differed depending on the electrode location in an ECG-monitoring garment. Founded on this assumption, effects of 56 electrode positions were determined by sectioning the surface of the garment into grids with 6 cm intervals in the front and back of the bodice. In order to determine the optimal locations of the ECG electrodes from the 56 positions, ECG measurements were collected from 10 participants at every electrode position in the garment while the wearer was in motion. The electrode locations indicating both an ECG measurement rate higher than 80.0 % and a large amplitude during motion were selected as the optimal electrode locations. The results of this analysis show four electrode locations with consistently higher ECG measurement rates and larger amplitudes amongst the 56 locations. These four locations were abstracted to be least affected by wearer movement in this research. Based on this result, a design of the garment-formed ECG monitoring platform reflecting the optimal positions of the electrode was suggested.

Advanced Liquid-Cooling Garment Using Highly Thermally Conductive Sheets

NASA Technical Reports Server (NTRS)

Ruemmele, Warren P.; Bue, Grant C.; Orndoff, Evelyne; Tang, Henry

2010-01-01

This design of the liquid-cooling garment for NASA spacesuits allows the suit to remove metabolic heat from the human body more effectively, thereby increasing comfort and performance while reducing system mass. The garment is also more flexible, with fewer restrictions on body motion, and more effectively transfers thermal energy from the crewmember s body to the external cooling unit. This improves the garment s performance in terms of the maximum environment temperature in which it can keep a crewmember comfortable. The garment uses flexible, highly thermally conductive sheet material (such as graphite), coupled with cooling water lines of improved thermal conductivity to transfer the thermal energy from the body to the liquid cooling lines more effectively. The conductive sheets can be layered differently, depending upon the heat loads, in order to provide flexibility, exceptional in-plane heat transfer, and good through-plane heat transfer. A metal foil, most likely aluminum, can be put between the graphite sheets and the external heat source/sink in order to both maximize through-plane heat transfer at the contact points, and to serve as a protection to the highly conductive sheets. Use of a wicking layer draws excess sweat away from the crewmember s skin and the use of an outer elastic fabric ensures good thermal contact of the highly conductive underlayers with the skin. This allows the current state of the art to be improved by having cooling lines that can be more widely spaced to improve suit flexibility and to reduce weight. Also, cooling liquid does not have to be as cold to achieve the same level of cooling. Specific areas on the human body can easily be targeted for greater or lesser cooling to match human physiology, a warmer external environment can be tolerated, and spatial uniformity of the cooling garment can be improved to reduce vasoconstriction limits. Elements of this innovation can be applied to other embodiments to provide effective heat transfer over a flexible and surface-conformable fashion without the limitation of fluid freeze points.

Physiologic and Functional Responses of MS Patients to Body Cooling Using Commercially Available Cooling Garments

NASA Technical Reports Server (NTRS)

Ku, Yu-Tsuan E.; Montgomery, Leslie D.; Lee, Hank C.; Luna, Bernadette; Webbon, Bruce W.; Mead, Susan C. (Technical Monitor)

1999-01-01

Personal cooling systems are widely used in industrial and aerospace environments to alleviate thermal stress. Increasingly they are also used by heat sensitive multiple sclerosis (HSMS) patients to relieve symptoms and improve quality of life. There are a variety of cooling systems commercially available to the MS community. However, little information is available regarding the comparative physiological changes produced by routine operation of these various systems. The objective of this study was to document and compare the patient response to two passive cooling vests and one active cooling garment. The Life Enhancement Technology, Inc. (LET) lightweight active cooling vest with cap, the MicroClimate Systems (MCS) Change of Phase garment, and the Steele Vest were each used to cool 13 male and 13 female MS subjects (31 to 67 yr.) in this study. The subjects, seated in an upright position at normal room temperature (approximately 22 C), were tested with one of the cooling garments. Oral, fight and left ear temperatures were logged manually every 5 min. An-n, leg, chest and rectal temperatures; heart rate; and respiration were recorded continuously on a U.F.I., Inc. Biolog ambulatory monitor. Each subject was given a series of subjective and objective evaluation tests before and after cooling. The LET and Steele vests test groups had similar, significant (P less than 0.01) cooling effects on oral and ear canal temperature, which decreased approximately 0.4 C, and 0.3 C, respectively. Core temperature increased (N.S.) with all three vests during cooling. The LET vest produced the coldest (P less than 0.01) skin temperature. Overall, the LET vest provided the most improvement on subjective and objective performance measures. These results show that the garment configurations tested do not elicit a similar thermal response in all MS patients. Cooling with the LET active garment configuration resulted in the lowest body temperatures for the MS subjects; cooling with the MCS vest was least effective. For functional responses, the LET test group performed better than the other two vests.

Nutritional and Micronutrient Status of Female Workers in a Garment Factory in Cambodia.

PubMed

Makurat, Jan; Friedrich, Hanna; Kuong, Khov; Wieringa, Frank T; Chamnan, Chhoun; Krawinkel, Michael B

2016-11-02

Concerns about the nutritional status of Cambodian garment workers were raised years ago but data are still scarce. The objectives of this study are to examine the nutritional, hemoglobin and micronutrient status of female workers in a garment factory in Phnom Penh, Cambodia, and to assess if body mass index is associated with hemoglobin and/or micronutrient status. A cross-sectional survey was conducted among 223 female workers (nulliparous, non-pregnant) at a garment factory in Phnom Penh. Anthropometric measurements were performed and blood samples were taken to obtain results on hemoglobin, iron, vitamin A, vitamin B12 and inflammation status (hemoglobinopathies not determined). Bivariate correlations were used to assess associations. Overall, 31.4% of workers were underweight, 26.9% showed anemia, 22.1% showed iron deficiency, while 46.5% had marginal iron stores. No evidence of vitamin A or vitamin B12 deficiency was found. Body mass index was associated with serum ferritin (negative) and serum retinol-binding protein (positive) concentrations, but not strongly. A comparison between underweight and not underweight workers resulted in distinctions for iron deficiency and iron deficiency anemia, with a higher prevalence among not underweight. The prevalence of underweight, anemia and poor iron status was high. Young and nulliparous female garment workers in Cambodia might constitute a group with elevated risk for nutritional deficiencies. Strategies need to be developed for improving their nutritional, micronutrient and health status. The poor iron status seems to contribute to the overall prevalence of anemia. Low hemoglobin and iron deficiency affected both underweight and those not underweight. Despite the fact that body mass index was negatively associated with iron stores, true differences in iron status between underweight and not underweight participants cannot be confirmed.

Nutritional and Micronutrient Status of Female Workers in a Garment Factory in Cambodia

PubMed Central

Makurat, Jan; Friedrich, Hanna; Kuong, Khov; Wieringa, Frank T.; Chamnan, Chhoun; Krawinkel, Michael B.

2016-01-01

Background: Concerns about the nutritional status of Cambodian garment workers were raised years ago but data are still scarce. The objectives of this study are to examine the nutritional, hemoglobin and micronutrient status of female workers in a garment factory in Phnom Penh, Cambodia, and to assess if body mass index is associated with hemoglobin and/or micronutrient status. Methods: A cross-sectional survey was conducted among 223 female workers (nulliparous, non-pregnant) at a garment factory in Phnom Penh. Anthropometric measurements were performed and blood samples were taken to obtain results on hemoglobin, iron, vitamin A, vitamin B12 and inflammation status (hemoglobinopathies not determined). Bivariate correlations were used to assess associations. Results: Overall, 31.4% of workers were underweight, 26.9% showed anemia, 22.1% showed iron deficiency, while 46.5% had marginal iron stores. No evidence of vitamin A or vitamin B12 deficiency was found. Body mass index was associated with serum ferritin (negative) and serum retinol-binding protein (positive) concentrations, but not strongly. A comparison between underweight and not underweight workers resulted in distinctions for iron deficiency and iron deficiency anemia, with a higher prevalence among not underweight. Conclusions: The prevalence of underweight, anemia and poor iron status was high. Young and nulliparous female garment workers in Cambodia might constitute a group with elevated risk for nutritional deficiencies. Strategies need to be developed for improving their nutritional, micronutrient and health status. The poor iron status seems to contribute to the overall prevalence of anemia. Low hemoglobin and iron deficiency affected both underweight and those not underweight. Despite the fact that body mass index was negatively associated with iron stores, true differences in iron status between underweight and not underweight participants cannot be confirmed. PMID:27827854

Estimated Nutritive Value of Low-Price Model Lunch Sets Provided to Garment Workers in Cambodia

PubMed Central

Makurat, Jan; Pillai, Aarati; Wieringa, Frank T.; Chamnan, Chhoun; Krawinkel, Michael B.

2017-01-01

Background: The establishment of staff canteens is expected to improve the nutritional situation of Cambodian garment workers. The objective of this study is to assess the nutritive value of low-price model lunch sets provided at a garment factory in Phnom Penh, Cambodia. Methods: Exemplary lunch sets were served to female workers through a temporary canteen at a garment factory in Phnom Penh. Dish samples were collected repeatedly to examine mean serving sizes of individual ingredients. Food composition tables and NutriSurvey software were used to assess mean amounts and contributions to recommended dietary allowances (RDAs) or adequate intake of energy, macronutrients, dietary fiber, vitamin C (VitC), iron, vitamin A (VitA), folate and vitamin B12 (VitB12). Results: On average, lunch sets provided roughly one third of RDA or adequate intake of energy, carbohydrates, fat and dietary fiber. Contribution to RDA of protein was high (46% RDA). The sets contained a high mean share of VitC (159% RDA), VitA (66% RDA), and folate (44% RDA), but were low in VitB12 (29% RDA) and iron (20% RDA). Conclusions: Overall, lunches satisfied recommendations of caloric content and macronutrient composition. Sets on average contained a beneficial amount of VitC, VitA and folate. Adjustments are needed for a higher iron content. Alternative iron-rich foods are expected to be better suited, compared to increasing portions of costly meat/fish components. Lunch provision at Cambodian garment factories holds the potential to improve food security of workers, approximately at costs of <1 USD/person/day at large scale. Data on quantitative total dietary intake as well as physical activity among workers are needed to further optimize the concept of staff canteens. PMID:28754003

Development and fabrication of an advanced liquid cooling garment

NASA Technical Reports Server (NTRS)

Leith, J. R.; Hixon, C. W.

1976-01-01

The elastomeric film fin/tube concept which was developed is a composite of polyurethane film, fine expanded silver mesh, a serpentine pattern polyurethane transport tubing and an integral comfort liner, all bonded via adhesive application and vacuum-bagged for final cure. As demonstrated by thermal analysis, the composite garment material is capable of removing a 293 watt (1000 BTU/hr) metabolic load through a head and torso cooling area of .46 sq m (5 sq ft) with tube spacing of slightly under one inch. A total of 60 test elements, each .15m x .15m (6 in. x 6 in.) were fabricated in support of the liquid cooling garment concept development. In parallel with the fabrication of these elements a continuing series of laboratory tests to support the fabrication techniques was carried out. The elements and supporting tests are described.

A Study in Child Care (Case Study from Volume II-A): "A Rolls-Royce of Day Care." Day Care Programs Reprint Series.

ERIC Educational Resources Information Center

O'Farrell, Brigid

The Amalgamated Day Care Center is an independent trust established through a collective bargaining agreement between the Amalgamated Clothing Workers of America, AFL-CIO, and the employers of the garment industry. The free center, open from 6:00 a.m. to 6:00 p.m., is located near the Chicago garment industries to minimize transportation problems…

It Cuts Both Ways: Workers, Management and the Construction of a "Community of Fate" on the Shop Floor in a Mexican Garment Factory

ERIC Educational Resources Information Center

Videla, Nancy Plankey

2006-01-01

Most studies of lean production are based on surveys of managers. This article examines the labor process under lean production at a high-end garment factory in Central Mexico through ethnographic research, consisting of nine months of work at the factory, and in-depth interviews with 25 managers and 26 workers. The author found that…

Physiological Effects of Chemical Protective Garments During Exercise and Heat Stress.

DTIC Science & Technology

1998-01-01

The present study was designed to examine the effect of protective garments , with a range of insulation and permeability characteristics, on changes...Pre- and post-experiment nude and clothed weights were measured and used to calculate sweat production (SP) and sweat loss (SL). TAP and RAIN had...environment compared to warm conditions. Sweat production was significantly increased as suits became less permeable and as the temperature increased from

Research Women’s Shirt Production

DTIC Science & Technology

1992-04-17

there was no sense in producing, for fit or wear test, garments which were inherently imprecise due to pattern problems. The resulting discoveries pointed...the approval of additional prototypes, 48 shirts were produced. Detailed garment dimension specification ;charts were provided for future quality...the industry at large, surfaced and were addressed. 14. SUai CRMS IS. NUMHE OR PAGES 25 Apparel manufacturing, women’s shirts C RO’ 17. SECURITY

[MATCHE: Management Approach to Teaching Consumer and Homemaking Education.] Occupational Strand: Textiles and Clothing. Module II-D-2: Assembly Line Garment Construction.

ERIC Educational Resources Information Center

Henry, Nina

This competency-based preservice home economics teacher education module on assembly line garment construction is the second in a set of three modules on occupational aspects of textiles and clothing. (This set is part of a larger series of sixty-seven modules on the Management Approach to Teaching Consumer and Homemaking Education [MATCHE]--see…

A novel approach for fit analysis of thermal protective clothing using three-dimensional body scanning.

PubMed

Lu, Yehu; Song, Guowen; Li, Jun

2014-11-01

The garment fit played an important role in protective performance, comfort and mobility. The purpose of this study is to quantify the air gap to quantitatively characterize a three-dimensional (3-D) garment fit using a 3-D body scanning technique. A method for processing of scanned data was developed to investigate the air gap size and distribution between the clothing and human body. The mesh model formed from nude and clothed body was aligned, superimposed and sectioned using Rapidform software. The air gap size and distribution over the body surface were analyzed. The total air volume was also calculated. The effects of fabric properties and garment size on air gap distribution were explored. The results indicated that average air gap of the fit clothing was around 25-30 mm and the overall air gap distribution was similar. The air gap was unevenly distributed over the body and it was strongly associated with the body parts, fabric properties and garment size. The research will help understand the overall clothing fit and its association with protection, thermal and movement comfort, and provide guidelines for clothing engineers to improve thermal performance and reduce physiological burden. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Optimization of Ultrasonic Fabric Cleaning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hand, T.E.

The fundamental purpose of this project was to research and develop a process that would reduce the cost and improve the environmental efficiency of the present dry-cleaning industry. This second phase of research (see report KCP-94-1006 for information gathered during the first phase) was intended to allow the optimal integration of all factors of ultrasonic fabric cleaning. For this phase, Garment Care performed an extensive literature search and gathered data from other researchers worldwide. The Garment Care-AlliedSignal team developed the requirements for a prototype cleaning tank for studies and acquired that tank and the additional equipment required to use itmore » properly. Garment Care and AlliedSignal acquired the transducers and generators from Surftran Martin-Walter in Sterling Heights, Michigan. Amway's Kelly Haley developed the test protocol, supplied hundreds of test swatches, gathered the data on the swatches before and after the tests, assisted with the cleaning tests, and prepared the final analysis of the results. AlliedSignal personnel, in conjunction with Amway and Garment Care staff, performed all the tests. Additional planning is under way for future testing by outside research facilities. The final results indicated repeatable performance and good results for single layered fabric swatches. Swatches that were cleaned as a ''sandwich,'' that is, three or more layers.« less

An assessment of risk behaviours to HIV/AIDS vulnerability among young female garment workers in Bangladesh.

PubMed

Sayem, A; Popsci, M

2010-02-01

This study attempted to assess the risk behaviours for HIV/AIDS among female garment workers aged 15-24 years.A total of 300 garment workers in Dhaka city were assessed with a semi-structured interview. Their knowledge of HIV/AIDS was moderate with high rates of misperception regarding modes of transmission. Further, symptoms of possible sexually transmitted infections (STIs) such as genital ulcer disease and vaginal discharge were prevalent, and risk behaviours such as low use of condoms, multiple sex partners and drug abuse were also found. Logistic regression identified that women who sourced information through radio/television, health service providers or friends had higher age at first intercourse and higher HIV/AIDS knowledge scores and were more likely to use condoms. Those who gained information through radio/television or health service providers and those who abused drugs were more likely to have sex with multiple sex partners, while information gained through health service providers, and higher HIV/AIDS knowledge were protective against drug abuse, whereas sex with multiple partners was a predictor of drug abuse. We conclude that in Bangladesh, female garment workers are at risk of HIV/AIDS due to low education, lack of knowledge, STIs and risky behaviour.

Burn injury in kitchen workers: a cause for prevention.

PubMed

Riina, L H; Simpson, R L; Gudjonsson, O; Glickman, L T; Harris, S U; Johnson, D; Ginocchio, M

2000-01-01

Preventable thermal injuries in professional kitchen workers have been identified, and we have introduced a protective garment. Because of the nature of their occupation, kitchen workers are prone to thermal injuries. It has been our experience that the majority of these injuries are scald injuries on the ankles and dorsum of the feet. We propose that a protective garment, such as a waterproof shoe and garter, could reduce the incidence of these injuries.

Evaluation of the Efficiency of Liquid Cooling Garments using a Thermal Manikin

DTIC Science & Technology

2005-05-01

temperatures. The software also calculates thermal resistances and evaporative resistances. TM tests were run dry (i.e. no sweating ) and wet (i.e...REPORT DOCUMENTATION PAGE Form ApprovedOMB No . 0704-0188 SECURITY CLASSIFICATION OF REPORT SECURITY CLASSIFICATION OF THIS PAGE SECURITY CLASSIFICATION...OF ABSTRACT 8. M05-17 1. AGENCY USE ONLY (Leave blank) 4. TITLE AND SUBTITLE EVALUATION OF THE EFFICIENCY OF LIQUID COOLING GARMENTS USING A THERMAL

A Portable Sorption Tester for Nondestructive Testing of Chemical Protective Garments

DTIC Science & Technology

1992-08-01

ö.^ TECHNICAL REPORT NATICK/TR-92/042 Ap AASL MI A PORTABLE SORPTION TESTER FOR NONDESTRUCTIVE TESTING OF CHEMICAL PROTECTIVE GARMENTS ...items. DESTRUCTION NOTICE For Classified Documents: Follow the procedures in DoD 5200.22-M, Industrial Security Manual, Section 11-19 or DoD...disclosure of contents or reconstruction of the document. REPORT DOCUMENTATION PAGE Form Approved OMB No . 0704-0188 Public ’»oor.ra Ouro«" ":> -n

Commander Lousma adds water to a beverage container on middeck

NASA Technical Reports Server (NTRS)

1982-01-01

Commander Lousma, wearing communications kit assembly (assy) mini headset (HDST), fills beverage container using the JSC water dispenser kit water gun to prepare a juice drink. Lousma is wearing the trousers and shirt of a three-piece shuttle constant wear garment as he floats above the potable water tank on the middeck floor. The constant wear garment jacket is secured on a side hatch handle (background) to avoid zero gravity effect.

Fire and Ice - Safety, Comfort, and Getting the Firefighters' Job Done

NASA Technical Reports Server (NTRS)

Foley, Tico; Butzer, Melissa

1999-01-01

Daily life for firefighters consists of working with life-threatening hazards in hostile environments. A major hazard is excessive ambient heat. New hazards have arisen from protective gear that was intended to increase survival time of firefighters while finding and rescuing victims. The insulation is so good now that a firefighter's metabolic heat buildup cannot escape. This forces body core temperatures to life threatening levels in about 20 minutes of moderate activity. Using NASA space suit technology, Oceaneering Space Systems developed a liquid cooling garment prototype that will remove up to 250 watts of metabolic heat. After testing and certification as an approved accessory for firefighter use, this garment will be available for use by any individual encapsulated in protective clothing. This demonstration will present a high surface area circulated liquid cooling garment displayed on a mannequin and available for attendees to try on to experience the effects of active cooling.

Dependent seniors garment design

NASA Astrophysics Data System (ADS)

Caldas, A. L.; Carvalho, M. A.; Lopes, H. P.

2017-10-01

This paper is part of a PhD research in Textile Engineering at University of Minho and aims to establish an ergonomic pattern design methodology to be used in the construction of garments for elderly women, aged 65 and over, dependent of care. The research was developed with a close contact with four institutions involved in supporting this aged population, located in the cities of Guimarães (Portugal) and Teresina (Brazil). These clothes should be adequate to their anthropometrics and their special needs, in accordance with important functional factors for the dependency of their caregiver, such as: care for the caregiver and comfort for the user. Questions regarding the functional properties of the materials, the pattern design process, trimmings and the assembling process of the garments are specially considered in the desired comfort levels, in order to provide an adequate handling by facilitating the dressing and undressing tasks, but also to assure the user the needed comfort in all its variables.

Heat gain from thermal radiation through protective clothing with different insulation, reflectivity and vapour permeability.

PubMed

Bröde, Peter; Kuklane, Kalev; Candas, Victor; Den Hartog, Emiel A; Griefahn, Barbara; Holmér, Ingvar; Meinander, Harriet; Nocker, Wolfgang; Richards, Mark; Havenith, George

2010-01-01

The heat transferred through protective clothing under long wave radiation compared to a reference condition without radiant stress was determined in thermal manikin experiments. The influence of clothing insulation and reflectivity, and the interaction with wind and wet underclothing were considered. Garments with different outer materials and colours and additionally an aluminised reflective suit were combined with different number and types of dry and pre-wetted underwear layers. Under radiant stress, whole body heat loss decreased, i.e., heat gain occurred compared to the reference. This heat gain increased with radiation intensity, and decreased with air velocity and clothing insulation. Except for the reflective outer layer that showed only minimal heat gain over the whole range of radiation intensities, the influence of the outer garments' material and colour was small with dry clothing. Wetting the underclothing for simulating sweat accumulation, however, caused differing effects with higher heat gain in less permeable garments.

Protective supplied-breathing-air garment

DOEpatents

Childers, E.L.; von Hortenau, E.F.

1982-05-28

A breathing-air garment for isolating a wearer from hostile environments containing toxins or irritants is disclosed. The garment includes a suit and a separate head-protective enclosure or hood engaging a suit collar in sealing attachment. The hood and suit collar are cylindrically shaped and dimensioned to enable the wearer to withdraw his hands from the suit sleeves to perform manual tasks within the hood interior. Breathing air is supplied from an external air line with an air-delivery hose attached to the hood interior. The hose feeds air into an annular halo-like fiber-filled plenum having spaced discharge orifices attached to the hood top wall. A plurality of air exhaust/check valves located at the suit extremities cooperate with the hood air-delivery system to provide a cooling flow of circulating air from the hood throughout the suit interior. A suit entry seal provided on the suit sealed with an adhesive sealing flap.

There's an app for that shirt! Evaluation of augmented reality tracking methods on deformable surfaces for fashion design

NASA Astrophysics Data System (ADS)

Ruzanka, Silvia; Chang, Ben; Behar, Katherine

2013-03-01

In this paper we present appARel, a creative research project at the intersection of augmented reality, fashion, and performance art. appARel is a mobile augmented reality application that transforms otherwise ordinary garments with 3D animations and modifications. With appARel, entire fashion collections can be uploaded in a smartphone application, and "new looks" can be downloaded in a software update. The project will culminate in a performance art fashion show, scheduled for March 2013. appARel includes textile designs incorporating fiducial markers, garment designs that incorporate multiple markers with the human body, and iOS and Android apps that apply different augments, or "looks", to a garment. We discuss our philosophy for combining computer-generated and physical objects; and share the challenges we encountered in applying fiduciary markers to the 3D curvatures of the human body.

Ergonomic risk factor identification for sewing machine operators through supervised occupational therapy fieldwork in Bangladesh: A case study.

PubMed

Habib, Md Monjurul

2015-01-01

Many sewing machine operators are working with high risk factors for musculoskeletal health in the garments industries in Bangladesh. To identify the physical risk factors among sewing machine operators in a Bangladeshi garments factory. Sewing machine operators (327, 83% female), were evaluated. The mean age of the participants was 25.25 years. Six ergonomic risk factors were determined using the Musculoskeletal Disorders risk assessment. Data collection included measurements of sewing machine table and chair heights; this data was combined with information from informal interviews. Significant ergonomic risk factors found included the combination of awkward postures of the neck and back, repetitive hand and arm movements, poor ergonomic workstations and prolonged working hours without adequate breaks; these risk factors resulted in musculoskeletal complaints, sick leave, and switching jobs. One aspect of improving worker health in garment factories includes addressing musculoskeletal risk factors through ergonomic interventions.

Industrial and biomedical use of aerospace personal cooling garments

NASA Technical Reports Server (NTRS)

Williams, B. A.; Mcewen, G. N., Jr.; Montgomery, L. D.; Elkins, W. E.

1975-01-01

Liquid-cooled garments (LCG) have been developed which utilize liquid-cooled modules rather than the network of tygon tubing typical of Apollo LCG's. The ultra-thin, heat-sealed, polyurethane modules are situated over the body to cover 50 percent of the body surface area with special emphasis on the 'working' muscles and the head-neck area. These garments are being designed specifically for industrial and biomedical uses, such as: a head-neck cooling system which is being tested for race-car drivers, tractor drivers, truck drivers, or a head-neck cooling system tested for the reduction of the scalp hair loss which normally accompanies cancer treatments. A combined head-neck and thorax unit is being developed for use during mine distaster rescue operations, and for other hazardous hot applications. Finally applications for head-neck and partitional cooling are anticipated for military pilots, tank drivers, and heavy equipment operations.

Evaluation of gowns and coveralls used by medical personnel working with Ebola patients against simulated bodily fluids using an Elbow Lean Test.

PubMed

Jaques, Peter A; Gao, Pengfei; Kilinc-Balci, Selcen; Portnoff, Lee; Weible, Robyn; Horvatin, Matthew; Strauch, Amanda; Shaffer, Ronald

2016-11-01

Gowns and coveralls are important components of protective ensembles used during the management of known or suspected Ebola patients. In this study, an Elbow Lean Test was used to obtain a visual semi-quantitative measure of the resistance of medical protective garments to the penetration of two bodily fluid simulants. Tests were done on swatches of continuous and discontinuous regions of fabrics cut from five gowns and four coveralls at multiple elbow pressure levels (2-44 PSI). Swatches cut from the continuous regions of one gown and two coveralls did not have any strike-through. For discontinuous regions, only the same gown consistently resisted fluid strike-through. As hypothesized, with the exception of one garment, fluid strike-through increased with higher applied elbow pressure, was higher for lower fluid surface tension, and was higher for the discontinuous regions of the protective garments.

Fashion garment manufacturing - FGM and cyclability theory

NASA Astrophysics Data System (ADS)

Mendes, F. D.; Dos Santos, M. C. L.

2017-10-01

This article, derived from an ongoing research, presents the possibilities of reducing the inappropriate disposal of textile residues generated by the fabric cutting sector of the Fashion Garment Manufacturing (FGM). The raw material used is very varied, resulting in a large number of productive processes. FGM produces clothing that has as its main features a short life cycle, a high rate of diversification and differentiation, and small production batches, resulting in few similar parts. The production process is differentiated according to the characteristics of the fabric and the look of the garment. During the production process, at least 10% of textile waste is generated during the cutting process, which is constantly discarded in an inadequate way. The Cyclability theory is researched aiming at the possibility of reduction in the generation of waste and elimination of inappropriate disposal. The case study presents the action research carried out in three small Brazilian companies to study the applicability of the Cyclability theory.

Gradient Compression Garments as a Countermeasure to Post-Space Flight Orthostatic Intolerance: Potential Interactions with the Maximum Absorbency Garment

NASA Technical Reports Server (NTRS)

Lee, S. M. C.; Laurie, S. S.; Macias, B. R.; Willig, M.; Johnson, K.; Stenger, M. B.

2017-01-01

Astronauts and cosmonauts may experience symptoms of orthostatic intolerance during re-entry, landing, and for several days post-landing following short- and long-duration spaceflight. Presyncopal symptoms have been documented in approximately 20% of short-duration and greater than 60% of long-duration flyers on landing day specifically during 5-10 min of controlled (no countermeasures employed at the time of testing) stand tests or 80 deg head-up tilt tests. Current operational countermeasures to orthostatic intolerance include fluid loading prior to and whole body cooling during re-entry as well as compression garments that are worn during and for up to several days after landing. While both NASA and the Russian space program have utilized compression garments to protect astronauts and cosmonauts traveling on their respective vehicles, a "next-generation" gradient compression garment (GCG) has been developed and tested in collaboration with a commercial partner to support future space flight missions. Unlike previous compression garments used operationally by NASA that provide a single level of compression across only the calves, thighs, and lower abdomen, the GCG provides continuous coverage from the feet to below the pectoral muscles in a gradient fashion (from approximately 55 mm Hg at the feet to approximately 16 mmHg across the abdomen). The efficacy of the GCG has been demonstrated previously after a 14-d bed rest study without other countermeasures and after short-duration Space Shuttle missions. Currently the GCG is being tested during a stand test following long-duration missions (6 months) to the International Space Station. While results to date have been promising, interactions of the GCG with other space suit components have not been examined. Specifically, it is unknown whether wearing the GCG over NASA's Maximum Absorbency Garment (MAG; absorbent briefs worn for the collection of urine and feces while suited during re-entry and landing) will interfere with the effectiveness of the GCG or conversely whether the GCG will reduce the fluid absorption capabilities of the MAG. Methods: This operational, directed study, will (1) determine whether the effectiveness of the GCG is affected by the MAG with regard to cardiovascular responses to head-up tilt, the standard orthostatic intolerance test employed for astronauts and bed rest subjects; (2) determine whether the effectiveness of the MAG is compromised by the GCG tested by injecting a standard fluid volume (950 ml in 3 separate simulated "urine voids") at a standardized rate (30 ml/sec); and (3) determine whether comfort is affected by wearing the MAG under the GCG using a standardized questionnaire. Results from this study will guide future development and operational use of the GCG and MAG to maximize crew health, safety, and comfort.

A multi-centre, parallel group superiority trial of silk therapeutic clothing compared to standard care for the management of eczema in children (CLOTHES Trial): study protocol for a randomised controlled trial.

PubMed

Harrison, Eleanor F; Haines, Rachel H; Cowdell, Fiona; Sach, Tracey H; Dean, Taraneh; Pollock, Ian; Burrows, Nigel P; Buckley, Hannah; Batchelor, Jonathan; Williams, Hywel C; Lawton, Sandra; Brown, Sara J; Bradshaw, Lucy E; Ahmed, Amina; Montgomery, Alan A; Mitchell, Eleanor J; Thomas, Kim S

2015-09-02

Eczema is a chronic, itchy skin condition that can have a large impact on the quality of life of patients and their families. People with eczema are often keen to try out non-pharmacological therapies like silk therapeutic garments that could reduce itching or the damage caused by scratching. However, the effectiveness and cost-effectiveness of these garments in the management of eczema has yet to be proven. The CLOTHES Trial will test the hypothesis that 'silk therapeutic garments plus standard eczema care' is superior to 'standard care alone' for children with moderate to severe eczema. Parallel group, observer-blind, pragmatic, multi-centre randomised controlled trial of 6 months' duration. Three hundred children aged 1 to 15 years with moderate to severe eczema will be randomised (1:1) to receive silk therapeutic garments plus standard eczema care, or standard eczema care alone. Primary outcome is eczema severity, as assessed by trained and blinded investigators at 2, 4 and 6 months (using the Eczema Area and Severity Index (EASI)). Secondary outcomes include: patient-reported eczema symptoms (collected weekly for 6 months to capture long-term control); global assessment of severity; quality of life of the child, family and main carer; use of standard eczema treatments (emollients, corticosteroids applied topically, calcineurin inhibitors applied topically and wet wraps); frequency of infections; and cost-effectiveness. The acceptability and durability of the clothing will also be assessed, as will adherence to wearing the garments. A nested qualitative study will assess the views of a subset of children wearing the garments and their parents, and those of healthcare providers and commissioners. Randomisation uses a computer-generated sequence of permuted blocks of randomly varying size, stratified by recruiting hospital and child's age (< 2 years; 2 to 5 years; > 5 years), and concealed using a secure web-based system. The sequence of treatment allocations will remain concealed until randomisation and data collection are complete. Recruitment is taking place from November 2013 to May 2015, and the trial will be completed in 2016. Full details of results will be published in the National Institute for Health Research Journal series. Current Controlled Trials ISRCTN77261365 (registered 11 November 2013).

Custom Gradient Compression Stockings May Prevent Orthostatic Intolerance in Astronauts After Space Flight

NASA Technical Reports Server (NTRS)

Stenger, Michael B.; Lee, Stuart M. C.; Westby, Christian M.; Platts, Steven H.

2010-01-01

Orthostatic intolerance after space flight is still an issue for astronauts as no in-flight countermeasure has been 100% effective. NASA astronauts currently wear an inflatable anti-gravity suit (AGS) during re-entry, but this device is uncomfortable and loses effectiveness upon egress from the Shuttle. We recently determined that thigh-high, gradient compression stockings were comfortable and effective after space flight, though to a lesser degree than the AGS. We also recently showed that addition of splanchnic compression to this thigh-high compression stocking paradigm improved orthostatic tolerance to a level similar to the AGS, in a ground based model. Purpose: The purpose of this study was to evaluate a new, three-piece breast-high gradient compression garment as a countermeasure to post-space flight orthostatic intolerance. Methods: Eight U.S. astronauts have volunteered for this experiment and were individually fitted for a three-piece, breast-high compression garment to provide 55 mmHg compression at the ankle which decreased to approximately 20 mmHg at the top of the leg and provides 15 mmHg over the abdomen. Orthostatic testing occurred 30 days pre-flight (w/o garment) and 2 hours after flight (w/ garment) on landing day. Blood pressure (BP), Heart Rate (HR) and Stroke Volume (SV) were acquired for 2 minutes while the subject lay prone and then for 3.5 minutes after the subject stands up. To date, two astronauts have completed pre- and post-space flight testing. Data are mean SD. Results: BP [pre (prone to stand): 137+/-1.6 to 129+/-2.5; post: 130+/-2.4 to 122+/-1.6 mmHg] and SV [pre (prone to stand): 61+/-1.6 to 38+/-0.2; post: 58+/-6.4 to 37+/-6.0 ml] decreased with standing, but no differences were seen post-flight w/ compression garments compared to pre-flight w/o garments. HR [pre (prone to stand): 66+/-1.6 to 74+/-3.0, post: 67+/-5.6 to 78+/-6.8 bpm] increased with standing, but no differences were seen pre- to post-flight. Conclusion: After space flight, blood pressure and stroke volume are normally decreased and heart rate is usually elevated to compensate. In this small group of subjects, breast-high gradient compression stockings seem to have prevented these negative effects of spaceflight.

Pre-Flight Advanced Clothing Study

NASA Technical Reports Server (NTRS)

Orndoff, Evelyne; Poritz, Darwin; Schlesinger, Thilini; Byme, Vicky

2014-01-01

All human space missions require significant logistical mass and volume that will become an excessive burden for long duration missions beyond low Earth orbit. The current International Space Station (ISS) crew wardrobe has already evolved not only to reduce some of the logistical burden but also to address crew preference. The present study was undertaken to find ways further to reduce this logistical burden while examining human response to different types of clothes. The primary objective of the study is to measure how long people can wear the same exercise garment, depending on the type of fabric and the presence of antimicrobial treatment. The secondary objective is to assess the reasons for length of wear from perceptions of clothing characteristics, including nine ordinal scales. Cardiovascular exercise was chosen as the activity in this experiment for its profuse sweating effect and because it is considered a more severe treatment applied to the clothes than every-day usage. Study garments were exercise T-shirts and shorts purchased from various vendors. Fabric construction, fabric composition, and finishing treatment were defined as the key variables. A web-based questionnaire was used for self-reported data collection. The study was divided in three balanced experiments: a cotton-polyester-wool (CPW) T-shirts study with 61 participants, a polyester-modacrylic-polyester/cocona (PMC) T-shirts study with 40 participants, and a shorts study with 70 participants. In the CPW study, the T-shirts were made of 100% cotton, or of 100% polyester or of 100% wool, and categorized into open and tight knit constructions. In the PMC study, the T-shirts were made of 100% polyester, or of 82% modacrylic, or of 95% polyester with 5% cocona fiber, without construction distinction. The shorts were made either of 100% cotton or of 100% polyester, and were knitted or woven. Some garments were treated with Bio-Protect 500 antimicrobial finish according the experimental design. The data collected from the questionnaire included garment identification, level of exertion, duration of exercise session, number of exercise sessions, an ordinal preference scale for nine sensory elements, and reason for retiring a used garment. From the analysis of the combined CPW and PMC shirt studies, there are statistically significant differences among the mean lifetimes of various types of shirts. The exercise shirts with the longest mean lifetimes are untreated wool (600 minutes), treated cotton (526 minutes), and untreated modacrylic (515 minutes). From the combined CPW and PMC shirt studies, the most preferred material was untreated open-knit wool, which is one of the two materials that jointly were worn the longest, untreated wool, both open-knit and tight-knit. For the CP shorts study, there were no statistically significant differences in mean lifetimes of the exercise shorts at the 5% significance level due to the treatment combinations. There was therefore no justification to examine differences among levels of main effects or interactions. The preference for shorts was in this order: untreated woven polyester, untreated knitted polyester, untreated woven cotton, and treated knitted cotton.The nine preference scales were tabulated to determine the preference responses at the end of those exercise periods which were prior to the period when a garment was retired and a new garment was started. The assumption is that an unfavorable assessment of a garment leads to its retirement. The scent scale response was predominantly unfavorable at the end of the exercise period immediately prior to the exercise period when a new garment was started. Additional work on wool clothing is needed to assess if this material can be part of a crew wardrobe for long duration missions. The results of this study informed the choice of fabrics for an upcoming ISS intra-vehicular clothing study.

On development of an inexpensive, lightweight thermal micrometeroid garment for space suits

NASA Technical Reports Server (NTRS)

1975-01-01

A lightweight and inexpensive coverlayer developed for space suits is described. Material selection, procurement, and testing, pattern design, and prototype fabrication are discussed. By using the minimum required cross section necessary for earth orbital mission, by utilizing the lightest weight materials possible, and by decreasing the use of weight costly taping a lightweight and economical thermal micrometeroid garment was developed. Simplification of manufacturing techniques and use of off-the-shelf materials helped to reduce costs.

Control Algorithms For Liquid-Cooled Garments

NASA Technical Reports Server (NTRS)

Drew, B.; Harner, K.; Hodgson, E.; Homa, J.; Jennings, D.; Yanosy, J.

1988-01-01

Three algorithms developed for control of cooling in protective garments. Metabolic rate inferred from temperatures of cooling liquid outlet and inlet, suitably filtered to account for thermal lag of human body. Temperature at inlet adjusted to value giving maximum comfort at inferred metabolic rate. Applicable to space suits, used for automatic control of cooling in suits worn by workers in radioactive, polluted, or otherwise hazardous environments. More effective than manual control, subject to frequent, overcompensated adjustments as level of activity varies.

Gendered histories: garment production and migration in Mexico.

PubMed

Wilson, F

1999-02-01

Data gathered in Aguascalientes during the 1990s are used to analyze how the garment industry in Mexico has responded to economic recession and trade liberalization. In particular, the relationship between industrial change and gendered patterns of migration are explored. The author concludes that "migration over recent years has increasingly allowed working women the possibility of entering a transnational labour force and given them important labouring and living experiences on both sides of the border." excerpt

Fusible heat sink for EVA thermal control

NASA Technical Reports Server (NTRS)

Roebelen, G. J., Jr.

1975-01-01

The preliminary design and analysis of a heat sink system utilizing a phase change slurry material to be used eventually for astronaut cooling during manned space missions is described. During normal use, excess heat in the liquid cooling garment coolant is transferred to a reusable/regenerable fusible heat sink. Recharge is accomplished by disconnecting the heat sink from the liquid cooling garment and placing it in an on board freezer for simultaneous slurry refreeze and power supply electrical rechange.

Commander Young reviews clipboard notes and procedures on forward flight deck

NASA Image and Video Library

1981-04-14

STS001-07-540 (12-14 April 1981) --- Astronaut John W. Young, commander, is seated at his left side station in the flight deck of the space shuttle Columbia. He holds a loose-leaf book in which he recorded data during the flight. Soon after the launch phase of STS-1, astronauts Young and Robert L. Crippen, pilot, changed from their high altitude pressure garments into the light blue constant wear garment. Photo credit: NASA

Prevalence of musculoskeletal symptoms among garment workers in Kandal province, Cambodia.

PubMed

Van, Leap; Chaiear, Naesinee; Sumananont, Chat; Kannarath, Chheng

2016-01-01

The main objectives of this cross-sectional descriptive study were to identify the prevalence of musculoskeletal symptoms and workstation biomechanical risk levels for garment workers in Kandal Province, Cambodia. This cross-sectional descriptive study used multistage sampling techniques to select 714 workers from three garment factories among 22 medium-size factories (250-1,000 workers). Face-to-face interviews and direct observation using the rapid upper limb assessment scale (RULA) were used to collect data. The response rate was 98.3% (702/714), and the majority (89.3%) of the respondents were female. Ninety-two percent (95% CI=90.0-94.0) of the workers reported musculoskeletal symptoms in at least one body region in the previous 12 months and 89.0% (95% CI=86.7-91.3) of the workers reported such symptoms in the past seven-day period. The neck, shoulder, and lower back were the most affected body regions. In addition, the RULA data showed that 81.2% of the workers' postures were rated as action level 3, indicating that investigation and change were required soon, and that 7.5% their postures were rated as action level 4, indicating that investigation and change were required immediately. Cambodian garment workers reported a high prevalence of musculoskeletal symptoms in upper body regions, and their workplaces were rated as high risk ergonomically.

Effect of 3 Weeks Use of Compression Garments on Stride and Impact Shock during a Fatiguing Run.

PubMed

Lucas-Cuevas, A G; Priego-Quesada, J I; Aparicio, I; Giménez, J V; Llana-Belloch, S; Pérez-Soriano, P

2015-10-01

Excessive and prolonged exposure to impact acceleration during running is associated with increased injury rate. Acute use of compressive garments has been speculated to improve attenuation. However, it is unknown how longer interventions of compressive garments influence attenuation in running. 40 runners trained with compressive and placebo stockings for 3 weeks. Perception of comfort, stride parameters (rate, length) and impact acceleration (head and tibial peak acceleration, magnitude, acceleration rate and attenuation) were measured every 5 min during a fatigue run (30 min at 80% of the individual's maximal aerobic speed). Compressive stockings reduced tibial peak acceleration and magnitude compared to placebo stockings at every minute (p<0.05) except for the initial measurement (p>0.05). Moreover, compressive stockings led to a lower rate of increase in tibial peak acceleration (14%, p<0.005) and magnitude (16%, p<0.001) as a result of the development of fatigue compared to placebo stockings (24% and 26% increase, p=0.014 and p=0.003, respectively). Similar perception of comfort was reported for both garments. Training with compressive stockings for 3 weeks reduced impact acceleration and the rate of increase in acceleration compared to placebo stockings. These findings suggest that compressive stockings may play a protective role by reducing impact accelerations during running. © Georg Thieme Verlag KG Stuttgart · New York.

Smart Garment Fabrics to Enable Non-Contact Opto-Physiological Monitoring.

PubMed

Iakovlev, Dmitry; Hu, Sijung; Hassan, Harnani; Dwyer, Vincent; Ashayer-Soltani, Roya; Hunt, Chris; Shen, Jinsong

2018-03-29

Imaging photoplethysmography (iPPG) is an emerging technology used to assess microcirculation and cardiovascular signs by collecting backscattered light from illuminated tissue using optical imaging sensors. The aim of this study was to study how effective smart garment fabrics could be capturing physiological signs in a non-contact mode. The present work demonstrates a feasible approach of, instead of using conventional high-power illumination sources, integrating a grid of surface-mounted light emitting diodes (LEDs) into cotton fabric to spotlight the region of interest (ROI). The green and the red LEDs (525 and 660 nm) placed on a small cotton substrate were used to locally illuminate palm skin in a dual-wavelength iPPG setup, where the backscattered light is transmitted to a remote image sensor through the garment fabric. The results show that the illuminations from both wavelength LEDs can be used to extract heart rate (HR) reaching an accuracy of 90% compared to a contact PPG probe. Stretching the fabric over the skin surface alters the morphology of iPPG signals, demonstrating a significantly higher pulsatile amplitude in both channels of green and red illuminations. The skin compression by the fabric could be potentially utilised to enhance the penetration of illumination into cutaneous microvascular beds. The outcome could lead a new avenue of non-contact opto-physiological monitoring and assessment with functional garment fabrics.

Environmental and organizational factors associated with elbow/forearm and hand/wrist disorder among sewing machine operators of garment industry in Ethiopia.

PubMed

Kebede Deyyas, Wakjira; Tafese, Ararso

2014-01-01

Occupational health problems related to upper limp musculoskeletal disorders were the major issue among sewing machine operators of garment industries in Ethiopia. The aim of this study was to assess the prevalence and associated risk factors of work related elbow and wrist musculoskeletal disorders among sewing machine operators of garment industries in Galan City, Oromia Regional State. A cross-sectional study was conducted from April 1 to 30, 2012. A total of 422 study subjects were included in this study. Standard Nordic Musculoskeletal Questionnaire was used to collect detailed information on musculoskeletal symptom, sociodemographic data, and factors associated with the problems through face to face interview. From a total of 422 sewing machine operators included in the study 370 (87.7%) were females and 306 (72.5%) were in the age group of <30 years. The prevalence of self-reported work related elbow and wrist musculoskeletal disorders was 40% and 37.7%, respectively. In multivariate analysis, those who had >16 years of service were about five times more likely to develop elbow and wrist musculoskeletal disorders than those who had short (1-5 years) year of services [AOR = 4.7, 95% CI: 1.55-13.02], physical activities [AOR = 5.02, 95% CI: 1.57-16.00], and methods of payment [AOR = 2.01, 95% CI: 1.23-3.28], factors significantly associated with this disorders. Work related elbow and wrist musculoskeletal disorders were high among sewing machine operators in selected garment industries. Moreover, personal and environmental factors were identified as the potential risk factors related to elbow and wrist musculoskeletal disorders among the study group. Therefore, government and the owner of the garment industries should give special attention to prevent and control the problems through proper occupational health and safety policy implementation in the country.

Environmental and Organizational Factors Associated with Elbow/Forearm and Hand/Wrist Disorder among Sewing Machine Operators of Garment Industry in Ethiopia

PubMed Central

Kebede Deyyas, Wakjira; Tafese, Ararso

2014-01-01

Occupational health problems related to upper limp musculoskeletal disorders were the major issue among sewing machine operators of garment industries in Ethiopia. The aim of this study was to assess the prevalence and associated risk factors of work related elbow and wrist musculoskeletal disorders among sewing machine operators of garment industries in Galan City, Oromia Regional State. A cross-sectional study was conducted from April 1 to 30, 2012. A total of 422 study subjects were included in this study. Standard Nordic Musculoskeletal Questionnaire was used to collect detailed information on musculoskeletal symptom, sociodemographic data, and factors associated with the problems through face to face interview. From a total of 422 sewing machine operators included in the study 370 (87.7%) were females and 306 (72.5%) were in the age group of <30 years. The prevalence of self-reported work related elbow and wrist musculoskeletal disorders was 40% and 37.7%, respectively. In multivariate analysis, those who had >16 years of service were about five times more likely to develop elbow and wrist musculoskeletal disorders than those who had short (1–5 years) year of services [AOR = 4.7, 95% CI: 1.55–13.02], physical activities [AOR = 5.02, 95% CI: 1.57–16.00], and methods of payment [AOR = 2.01, 95% CI: 1.23–3.28], factors significantly associated with this disorders. Work related elbow and wrist musculoskeletal disorders were high among sewing machine operators in selected garment industries. Moreover, personal and environmental factors were identified as the potential risk factors related to elbow and wrist musculoskeletal disorders among the study group. Therefore, government and the owner of the garment industries should give special attention to prevent and control the problems through proper occupational health and safety policy implementation in the country. PMID:25298780

Effectiveness of topical silicone gel and pressure garment therapy for burn scar prevention and management in children: study protocol for a randomised controlled trial.

PubMed

Wiseman, Jodie; Simons, Megan; Kimble, Roy; Ware, Robert; McPhail, Steven; Tyack, Zephanie

2017-02-16

Abnormal scar development following burn injury can cause substantial physical and psychological distress to children and their families. Common burn scar prevention and management techniques include silicone therapy, pressure garment therapy, or a combination of both. Currently, no definitive, high-quality evidence is available for the effectiveness of topical silicone gel or pressure garment therapy for the prevention and management of burn scars in the paediatric population. Thus, this study aims to determine the effectiveness of these treatments in children. A randomised controlled trial will be conducted at a large tertiary metropolitan children's hospital in Australia. Participants will be randomised to one of three groups: Strataderm® topical silicone gel only, pressure garment therapy only, or combined Strataderm® topical silicone gel and pressure garment therapy. Participants will include 135 children (45 per group) up to 16 years of age who are referred for scar management for a new burn. Children up to 18 years of age will also be recruited following surgery for burn scar reconstruction. Primary outcomes are scar itch intensity and scar thickness. Secondary outcomes include scar characteristics (e.g. colour, pigmentation, pliability, pain), the patient's, caregiver's and therapist's overall opinion of the scar, health service costs, adherence, health-related quality of life, treatment satisfaction and adverse effects. Measures will be completed on up to two sites per person at baseline and 1 week post scar management commencement, 3 months and 6 months post burn, or post burn scar reconstruction. Data will be analysed using descriptive statistics and univariate and multivariate regression analyses. Results of this study will determine the effectiveness of three noninvasive scar interventions in children at risk of, and with, scarring post burn or post reconstruction. Australian New Zealand Clinical Trials Registry, ACTRN12616001100482 . Registered on 5 August 2016.

Adult Competency Education Kit. Basic Skills in Speaking, Math, and Reading for Employment. Part J. ACE Competency Based Job Descriptions: Sales Core Job Description; #36--Sales, Automotive Parts; #37--Sales, Retail; #38--Salesperson, Garden & Housewares; #39--Salesperson, Women's Garments.

ERIC Educational Resources Information Center

San Mateo County Office of Education, Redwood City, CA. Career Preparation Centers.

This seventh of fifteen sets of Adult Competency Education (ACE) Competency Based Job Descriptions in the ACE kit contains job descriptions for Salesperson, Automotive Parts; Sales Clerk, Retail; Salesperson, Garden and Housewares; and Salesperson, Women's Garments. Each begins with a fact sheet that includes this information: occupational title,…

Helmet latching and attaching ring

NASA Technical Reports Server (NTRS)

Chase, E. W.; Viikinsalo, S. J. (Inventor)

1970-01-01

A neck ring releasably secured to a pressurized garment carries an open-ended ring normally in the engagement position fitted into an annular groove and adapted to fit into a complementary annular groove formed in a helmet. Camming means formed on the inner surface at the end of the helmet engages the open-ended ring to retract the same and allow for one motion donning even when the garment is pressurized. A projection on the end of the split ring is engageable to physically retract the split ring.

A fusible heat sink concept for extravehicular activity /EVA/ thermal control

NASA Technical Reports Server (NTRS)

Roebelen, G. J., Jr.

1976-01-01

This paper describes the preliminary design and analysis of a heat sink system, utilizing a phase change slurry material, to be used for astronaut and equipment cooling during manned space missions. During normal use, excess heat in the liquid cooling garment (LCG) coolant is transferred to a regenerable fusible heat sink. Recharge is accomplished by disconnecting the heat sink from the liquid cooling garment and placing it in an onboard freezer for simultaneous slurry refreeze and power supply recharge.

A Comparison of the Protection against Immersion Hypothermia Provided by Coast Guard Anti-Exposure Clothing in Calm Versus Rough Seas

DTIC Science & Technology

1985-06-01

34 insulated garments excluded cold-water entry, tightness-of-fit was not an important factor in thermal performance. The "dry" garments in this study were...Supplemertary Notes I 16. Abstruct The puirpose of this study was to caopare the protection against immersion hypothermia provided by various types of Coat...survival tize pro ons fron calmr-veter studies . 17. Key Words 18. Distribution Statement Hypothermia Rough water Immersion Protective clothing Sea

Do code of conduct audits improve chemical safety in garment factories? Lessons on corporate social responsibility in the supply chain from Fair Wear Foundation.

PubMed

Lindholm, Henrik; Egels-Zandén, Niklas; Rudén, Christina

2016-10-01

In managing chemical risks to the environment and human health in supply chains, voluntary corporate social responsibility (CSR) measures, such as auditing code of conduct compliance, play an important role. To examine how well suppliers' chemical health and safety performance complies with buyers' CSR policies and whether audited factories improve their performance. CSR audits (n = 288) of garment factories conducted by Fair Wear Foundation (FWF), an independent non-profit organization, were analyzed using descriptive statistics and statistical modeling. Forty-three per cent of factories did not comply with the FWF code of conduct, i.e. received remarks on chemical safety. Only among factories audited 10 or more times was there a significant increase in the number of factories receiving no remarks. Compliance with chemical safety requirements in garment supply chains is low and auditing is statistically correlated with improvements only at factories that have undergone numerous audits.

Industry in motion: using smart phones to explore the spatial network of the garment industry in New York City.

PubMed

Williams, Sarah; Currid-Halkett, Elizabeth

2014-01-01

Industrial agglomerations have long been thought to offer economic and social benefits to firms and people that are only captured by location within their specified geographies. Using the case study of New York City's garment industry along with data acquired from cell phones and social media, this study set out to understand the discrete activities underpinning the economic dynamics of an industrial agglomeration. Over a two week period, data was collected by employing the geolocative capabilities of Foursquare, a social media application, to record every movement of fashion workers employed at fashion design firms located both inside and outside the geographical boundaries of New York City's Garment District. This unique method of studying worker activity exposed the day-to-day dynamics of an industrial district with a precision thus far undocumented in literature. Our work suggests that having access to the cluster provides almost the same agglomeration economies as residing within its borders.

The US Navy/Canadian DCIEM research initiative on pressure breathing physiology

NASA Technical Reports Server (NTRS)

Whitley, Phillip E.

1994-01-01

Development of improved positive pressure breathing garments for altitude and acceleration protection has occurred without collection of sufficient physiological data to understand the mechanisms of the improvement. Furthermore, modeling of the predicted response of future enhanced garments is greatly hampered by this lack of information. A joint, international effort is under way between Canada's Defense and Civil Institute for Environmental Medicine (DCIEM) and the US Navy's Naval Air Warfare Center Aircraft Division, Warminster (NAWCACDIVWAR). Using a Canadian subject pool, experiments at both the DCIEM altitude facility and the NAWCADIVWAR Dynamic Flight Simulator have been conducted to determine the cardiovascular and respiratory consequences of high levels of positive pressure breathing for altitude and positive pressure breathing for acceleration protection. Various improved pressure breathing garments were used to collect comparative physiological and performance data. New pressure breathing level and durahon capabilities have been encountered. Further studies will address further improvements in pressure suit design and correlation of altitude and acceleration data.

Three-dimensional body scanning system for apparel mass-customization

NASA Astrophysics Data System (ADS)

Xu, Bugao; Huang, Yaxiong; Yu, Weiping; Chen, Tong

2002-07-01

Mass customization is a new manufacturing trend in which mass-market products (e.g., apparel) are quickly modified one at a time based on customers' needs. It is an effective competing strategy for maximizing customers' satisfaction and minimizing inventory costs. An automatic body measurement system is essential for apparel mass customization. This paper introduces the development of a body scanning system, body size extraction methods, and body modeling algorithms. The scanning system utilizes the multiline triangulation technique to rapidly acquire surface data on a body, and provides accurate body measurements, many of which are not available with conventional methods. Cubic B-spline curves are used to connect and smooth body curves. From the scanned data, a body form can be constructed using linear Coons surfaces. The body form can be used as a digital model of the body for 3-D garment design and for virtual try-on of a designed garment. This scanning system and its application software enable apparel manufacturers to provide custom design services to consumers seeking personal-fit garments.

Industry in Motion: Using Smart Phones to Explore the Spatial Network of the Garment Industry in New York City

PubMed Central

Williams, Sarah; Currid-Halkett, Elizabeth

2014-01-01

Industrial agglomerations have long been thought to offer economic and social benefits to firms and people that are only captured by location within their specified geographies. Using the case study of New York City’s garment industry along with data acquired from cell phones and social media, this study set out to understand the discrete activities underpinning the economic dynamics of an industrial agglomeration. Over a two week period, data was collected by employing the geo-locative capabilities of Foursquare, a social media application, to record every movement of fashion workers employed at fashion design firms located both inside and outside the geographical boundaries of New York City’s Garment District. This unique method of studying worker activity exposed the day-to-day dynamics of an industrial district with a precision thus far undocumented in literature. Our work suggests that having access to the cluster provides almost the same agglomeration economies as residing within its borders. PMID:24505256

The development of an elastic reverse gradient garment to be used as a countermeasure for cardiovascular deconditioning

NASA Technical Reports Server (NTRS)

Annis, J. F.; Webb, P.

1980-01-01

Using a new nomex lycra elastic fabric and individualized garment engineering techniques, reverse gradient garments (RGG's) were designed, constructed, and tested for effectiveness as a countermeasure against cardiovascular deconditioning. By combining torso compensated positive pressure breathing with a distally diminishing gradient of counterpressure supplied by the elastic fabric on the limbs, the RGG acts to pool blood in the extremities of recumbent persons much as though they were standing erect in 1 g. The RGG stresses the vasculature in a fashion similar to that experienced by the normally active man, hence preventing or limiting the development of post weightlessness orthostatic intolerance and related conditions. Four male, college age subjects received daily treatments with the RGG during a 15 day bedrest study. Four additional subjects also underwent the bedrest, but received no treatments; they served as controls. The preliminary indication was that the RGG was somewhat effective in limiting the deconditioning process.

Garment workers in California: health outcomes of the Asian Immigrant Women Workers Clinic.

PubMed

Burgel, Barbara J; Lashuay, Nan; Israel, Leslie; Harrison, Robert

2004-11-01

In this cross sectional descriptive study, the demographics, risk factors, and health outcomes of a volunteer, symptomatic sample of monolingual Cantonese garment workers in the Oakland, California Chinatown area are documented. Methods included a questionnaire and clinical examination and treatment at the Asian Immigrant Women Workers Clinic, a free clinic providing culturally focused occupational health consultation and treatment for painful musculoskeletal disorders. Because garment work involves highly repetitious, sustained awkward postures, focused education on stretching and ergonomics also was provided. Results from the first 100 clients revealed a highly symptomatic sample, with an average age of 48.7 years. Sixty-six percent rated their health status as fair or poor. Sixteen percent of the sample had nerve entrapments, and 99% had a diagnosed strain or sprain of the spine or upper extremities. This population did not file workers' compensation claims because of a lack of knowledge and a fear of reprisal. This study documented the barriers to seeking care for this low wage, immigrant population.

Effects of thermal energy harvesting on the human - clothing - environment microsystem

NASA Astrophysics Data System (ADS)

Myers, A. C.; Jur, J. S.

2017-10-01

The objective of this work is to perform an in depth investigation of garment-based thermal energy harvesting. The effect of human and environmental factors on the working efficiency of a thermal energy harvesting devices, or a thermoelectric generator (TEG), placed on the body is explored.. Variables that strongly effect the response of the TEG are as follows: skin temperature, human motion or speed, body location, environmental conditions, and the textile properties surrounding the TEG. In this study, the use of textiles for managing thermal comfort of wearable technology and energy harvesting are defined. By varying the stitch length and/or knit structure, one can manipulate the thermal conductivity of the garment in a specific location. Another method of improving TEG efficiency is through the use of a heat spreader, which increases the effective collection area of heat on the TEG hot side. Here we show the effect of a TEG on the thermal properties of a garment with regard to two knit stitches, jersey and 1 × 1 rib.

Do code of conduct audits improve chemical safety in garment factories? Lessons on corporate social responsibility in the supply chain from Fair Wear Foundation

PubMed Central

2016-01-01

Background In managing chemical risks to the environment and human health in supply chains, voluntary corporate social responsibility (CSR) measures, such as auditing code of conduct compliance, play an important role. Objectives To examine how well suppliers’ chemical health and safety performance complies with buyers’ CSR policies and whether audited factories improve their performance. Methods CSR audits (n = 288) of garment factories conducted by Fair Wear Foundation (FWF), an independent non-profit organization, were analyzed using descriptive statistics and statistical modeling. Results Forty-three per cent of factories did not comply with the FWF code of conduct, i.e. received remarks on chemical safety. Only among factories audited 10 or more times was there a significant increase in the number of factories receiving no remarks. Conclusions Compliance with chemical safety requirements in garment supply chains is low and auditing is statistically correlated with improvements only at factories that have undergone numerous audits. PMID:27611103

Space Suit Portable Life Support System (PLSS) 2.0 Human-in-the-Loop (HITL) Testing

NASA Technical Reports Server (NTRS)

Watts, Carly; Vogel, Matthew

2016-01-01

The space suit Portable Life Support System (PLSS) 2.0 represents the second integrated prototype developed and tested to mature a design that uses advanced technologies to reduce consumables, improve robustness, and provide additional capabilities over the current state of the art. PLSS 2.0 was developed in 2012, with extensive functional evaluations and system performance testing through mid-2014. In late 2014, PLSS 2.0 was integrated with the Mark III space suit in an ambient laboratory environment to facilitate manned testing, designated PLSS 2.0 Human-in-the-Loop (HITL) testing, in which the PLSS prototype performed the primary life support functions, including suit pressure regulation, ventilation, carbon dioxide control, and cooling of the test subject and PLSS avionics. The intent of this testing was to obtain subjective test subject feedback regarding qualitative aspects of PLSS 2.0 performance such as thermal comfort, sounds, smells, and suit pressure fluctuations due to the cycling carbon dioxide removal system, as well as to collect PLSS performance data over a range of human metabolic rates from 500-3000 Btu/hr. Between October 27 and December 18, 2014, nineteen two-hour simulated EVA test points were conducted in which suited test subjects walked on a treadmill to achieve a target metabolic rate. Six test subjects simulated nominal and emergency EVA conditions with varied test parameters including metabolic rate profile, carbon dioxide removal control mode, cooling water temperature, and Liquid Cooling and Ventilation Garment (state of the art or prototype). The nineteen test points achieved more than 60 hours of test time, with 36 hours accounting for simulated EVA time. The PLSS 2.0 test article performed nominally throughout the test series, confirming design intentions for the advanced PLSS. Test subjects' subjective feedback provided valuable insight into thermal comfort and perceptions of suit pressure fluctuations that will influence future advanced PLSS design and testing strategies.

The effectiveness of pressure garment therapy for the prevention of abnormal scarring after burn injury: a meta-analysis.

PubMed

Anzarut, Alexander; Olson, Jarret; Singh, Prabhjyot; Rowe, Brian H; Tredget, Edward E

2009-01-01

This study had three objectives. First, to conduct a systematic review to identify the available evidence for the use of pressure garment therapy (PGT); second, to assess the quality of the available evidence; and third, to conduct a meta-analysis to quantify the effectiveness of PGT for the prevention of abnormal scarring after burn injury. Standard care for the prevention of abnormal scarring after burn injury includes pressure garment therapy (PGT); however, it is associated with potential patient morbidity and high costs. We hypothesise that an assessment of the available evidence supporting the use of pressure garment therapy will aid in directing clinical care and future research. Randomised control trials were identified from CINHAL, EMBASE, MEDLINE, CENTRAL, the 'grey literature' and hand searching of the Proceedings of the American Burn Association. Primary authors and pressure garment manufacturers were contacted to identify eligible trials. Bibliographies from included studies and reviews were searched. Study results were pooled to yield weighted mean differences or standardised mean difference and reported using 95% confidence intervals. The review incorporated six unique trials involving 316 patients. Original data from one unpublished trial were included. Overall, studies were considered to be of high methodological quality. The meta-analysis was unable to demonstrate a difference between global assessments of PGT-treated scars and control scars [weighted mean differences (WMD): -0.46; 95% confidence interval (CI): -1.07 to 0.16]. The meta-analysis for scar height showed a small, but statistically significant, decrease in height for the PGT-treated group standardised mean differences (SMD): -0.31; 95% CI: -0.63, 0.00. Results of meta-analyses of secondary outcome measures of scar vascularity, pliability and colour failed to demonstrate a difference between groups. PGT does not appear to alter global scar scores. It does appear to improve scar height, although this difference is small and of questionable clinical importance. The beneficial effects of PGT remain unproven, while the potential morbidity and cost are not insignificant. Given current evidence, additional research is required to examine the effectiveness, risks and costs of PGT.

Impact of a protective vest and spacer garment on exercise-heat strain.

PubMed

Cheuvront, Samuel N; Goodman, Daniel A; Kenefick, Robert W; Montain, Scott J; Sawka, Michael N

2008-03-01

Protective vests worn by global security personnel, and weighted vests worn by athletes, may increase physiological strain due to added load, increased clothing insulation and vapor resistance. The impact of protective vest clothing properties on physiological strain, and the potential of a spacer garment to reduce physiological strain, was examined. Eleven men performed 3 trials of intermittent treadmill walking over 4 h in a hot, dry environment (35 degrees C, 30% rh). Volunteers wore the US Army battledress uniform (trial B), B + protective vest (trial P), and B + P + spacer garment (trial S). Biophysical clothing properties were determined and found similar to many law enforcement, industry, and sports ensembles. Physiological measurements included core (T (c)), mean skin (T (sk)) and chest (T (chest)) temperatures, heart rate (HR), and sweating rate (SR). The independent impact of clothing was determined by equating metabolic rate in all trials. In trial P, HR was +7 b/min higher after 1 h of exercise and +19 b/min by the fourth hour compared to B (P < 0.05). T (c) (+0.30 degrees C), T (sk) (+1.0 degrees C) and Physiological Strain Index were all higher in P than B (P < 0.05). S did not abate these effects except to reduce T (sk) (P > S) via a lower T (chest) (-0.40 degrees C) (P < 0.05). SR was higher (P < 0.05) in P and S versus B, but the magnitude of differences was small. A protective vest increases physiological strain independent of added load, while a spacer garment does not alter this outcome.

Effects of compression garments on recovery following intermittent exercise.

PubMed

Pruscino, Cathryn L; Halson, Shona; Hargreaves, Mark

2013-06-01

The objective of the study was to examine the effects of wearing compression garments for 24 h post-exercise on the biochemical, physical and perceived recovery of highly trained athletes. Eight field hockey players completed a match simulation exercise protocol on two occasions separated by 4 weeks after which lower-limb compression garments (CG) or loose pants (CON) were worn for 24 h. Blood was collected pre-exercise and 1, 24 and 48 h post-exercise for IL-6, IL-1β, TNF-α, CRP and CK. Blood lactate was monitored throughout exercise and for 30 min after. A 5 counter-movement jump (5CMJ) and squat jump were performed and perceived soreness rated at pre-exercise and 1, 24 and 48 h post-exercise. Perceived recovery was assessed post-exercise using a questionnaire related to exercise readiness. Repeated measures ANOVA was used to assess changes in blood, perceptual and physical responses to recovery. CK and CRP were significantly elevated 24 h post-exercise in both conditions (p < 0.05). No significant differences were observed for TNF-α, IL1-β, IL-6 between treatments (p > 0.05). Power and force production in the 5CMJ was reduced and perceived soreness was highest at 1 h post-exercise (p < 0.05). Perceived recovery was lowest at 1 h post-exercise in both conditions (p < 0.01), whilst overall, perceived recovery was greater when CG were worn (p < 0.005). None of the blood or physical markers of recovery indicates any benefit of wearing compression garments post-exercise. However, muscle soreness and perceived recovery indicators suggest a psychological benefit may exist.

Effects of compression clothing on speed-power performance of elite Paralympic sprinters: a pilot study.

PubMed

Loturco, Irineu; Winckler, Ciro; Lourenço, Thiago F; Veríssimo, Amaury; Kobal, Ronaldo; Kitamura, Katia; Pereira, Lucas A; Nakamura, Fábio Y

2016-01-01

Compression garments are thought to aid performance in some selected speed-power activities owing to improved sensory feedback and proprioception. The aim of this study was to test the effects of using compression garments on speed and power-related performances in elite sprinters with visual impairment, who rely more on proprioception to perform than their Olympic peers. Eight top-level Paralympic sprinters competing in 100- and 200-m races performed, in the following order: unloaded squat jump (SJ), loaded jump squat (JS) and sprint tests over 20- and 70-m distances; using or not the compression garment. The maximum mean propulsive power value obtained during the JS attempts (starting at 40 % of their body mass, after which a load of 10 % of body mass was progressively added) was considered for data analysis purposes. The athletes executed the SJ and JS attempts without any help from their guides. Magnitude-based inference was used to analyze the results. The unloaded SJ was possibly higher in the compression than the placebo condition (41.19 ± 5.09 vs. 39.49 ± 5.75 cm). Performance differences in the loaded JS and sprint tests were all rated as unclear. It was concluded that the acute enhancement in vertical jump ability should be explored in the preparation of Paralympic sprinters during power-related training sessions. However, chronic effects in Paralympic athletes wearing compression garments need to be further tested, in order to support its use as a specific training aid.

Microbiology of Drycleaning

PubMed Central

Banville, Robert R.; McNeil, Ethel

1966-01-01

An appreciable number of bacteria on contaminated fabric survived modern drycleaning procedures. Various stages in the process, especially steam pressing, reduced the total number of bacteria, but viable organisms were found on certain areas of garments even after pressing. A significant number of bacteria were redeposited on clean fabric during the washing of ordinary soiled garments in drycleaning units. These bacteria included gram-positive cocci, diphtheroid bacilli, and gram-positive sporeformers. Gram-negative bacilli were seldom found, although some gram-negative bacilli survived drycleaning. The redeposited organisms apparently came mainly from other garments in the same loads, as few bacteria were isolated from the filtered solvent used for washing. The number of bacteria in the drycleaning washwheel was highest shortly after the beginning of the wash, and decreased, with the exchange of solvent in the wheel, to a low level at the end. Although it appears that in most cases several factors combine to reduce to a low level the numbers of bacteria on articles cleaned in a well-operated drycleaning plant, it would seem that under certain conditions pathogenic microorganisms could be disseminated by drycleaning. Images Fig. 2 PMID:4958148

Ergonomic workplace evaluation of an Asian garment-factory.

PubMed

Sarder, B; Imrhan, Sheik N; Mandahawi, Nabeel

2006-12-01

A large number of establishments in the garment industries of the world are situated in the southeastern part of Asia where labor is plentiful and cheap. Recent reports and observational studies suggest that employees in this industry often work under difficult conditions that are unacceptable in industrialized countries. This paper reports the results of an ergonomic study in an export garment manufacturing plant in South East Asia to evaluate the working conditions of the plant from an ergonomics/human factors perspective and to suggest possible solutions to management for implementation. The investigation was done by a questionnaire survey and by observations and measurements in the workplace. The results indicated that the plant conditions were stressful, involving long work hours with poor safety and labor relations, and that work equipment and the physical workplace design were acceptable ergonomic practices. A low-cost solution, presented to management by the investigators, was implemented and, over a period of six months, seemed to be the dominant reason for significant improvements in throughput (14.6%), reduction in absenteeism (65%), job satisfaction (40%), decrease in employee turnover (75%), and reduction in health complaints (50%).

Design and development of the first exoskeletal garment to enhance arm mobility for children with movement impairments.

PubMed

Hall, Martha L; Lobo, Michele A

2017-05-25

Children with a variety of diagnoses have impairments that limit their arm function. Despite the fact that arm function is important for early learning and activities of daily living, there are few tools to assist movement for these children, and existing devices have challenges related to cost, accessibility, comfort, and aesthetics. In this article, we describe the design process and development of the first garment-based exoskeleton to assist arm movement in young children with movement impairments: the Playskin Lift TM . We outline our design process, which contrasts with the traditional medical model in that it is interdisciplinary, user-centered, and addresses the broad needs of users, rather than device function alone. Then we report the results of field-testing with the initial prototype with respect to our design metrics on a toddler with significant bilateral arm movement impairments. Finally, we summarize our ongoing development aimed at increasing comfort, aesthetics, and accessibility of the garment. The interdisciplinary, user-centered approach to assistive technology design presented here can result in innovative and impactful design solutions that translate to the real world.

Comparative study of lung functions in women working in different fibre industries.

PubMed

Khanam, F; Islam, N; Hai, M A

2008-07-01

A cross sectional work has been done on Bangladeshi females, working in different fibre industries, to study the effect of exposure to fibre dust on pulmonary functions. The ventilatory capacities were measured by VMI ventilometer in 653 apparently healthy women (160, 162 and 167 were jute, textile and garment industry workers, respectively). For the controls 164 females were recruited who never worked in any fibre industry. The observed FVC, FEV1 and PEFR were lower in all groups of fibre industry workers than those of the control. Among the industry workers, the jute mill workers had the lowest ventilatory capacities and garment industry workers had the highest values. The jute and textile mill workers had also significantly lower FEV1 and PEFR than those of garment industry workers. The FEV1 and PEFR were significantly lower in jute mill workers than those of textile ill workers. The low ventilatory capacities were almost proportionate with the length of service of the workers. Thus, the present study indicates that the fibre dust, on regular exposure for longer duration, may limit the lung functions.

Sweat or no sweat: foreign workers in the garment industry in Malaysia.

PubMed

Crinis, Vicki

2010-01-01

In the last decade factory owners, in response to brand-name Corporate Social Responsibility (CSR) parameters, have joined associations that verify (through a monitoring and audit system) that management does not exploit labour. There have been no reports of violations of codes of conduct concerning Malaysian workers but for foreign workers on contract there are certain areas that have been reported. These areas, including trade union membership, the withholding of workers' passports and unsuitable accommodation, generally escape notice because auditors who monitor factory compliance do not question the terms of contracts as long as they comply with national labour standards. This paper is based on research with foreign workers in Malaysia and argues that despite the success of the anti-sweatshop movement in a global context, the neo-liberal state in Malaysia continues to place certain restrictions on transnational labour migrants which breach garment industry codes of conduct. Available evidence does not support the assumption that CSR practices provide sufficient protection for both citizen and foreign workers on contract in the garment industry.

Electro-textile garments for power and data distribution

NASA Astrophysics Data System (ADS)

Slade, Jeremiah R.; Winterhalter, Carole

2015-05-01

U.S. troops are increasingly being equipped with various electronic assets including flexible displays, computers, and communications systems. While these systems can significantly enhance operational capabilities, forming reliable connections between them poses a number of challenges in terms of comfort, weight, ergonomics, and operational security. IST has addressed these challenges by developing the technologies needed to integrate large-scale cross-seam electrical functionality into virtually any textile product, including the various garments and vests that comprise the warfighter's ensemble. Using this technology IST is able to develop textile products that do not simply support or accommodate a network but are the network.

Removal of metabolic heat from man working in a protective suit

NASA Technical Reports Server (NTRS)

Shitzer, A.; Chato, J. C.; Hertig, B. A.

1972-01-01

A water cooled garment was constructed and used to study the characteristics of independent regional cooling of the body in contrast to the current practice of uniform cooling. The cooling pads in the garment were grouped to provide independent control of water inlet temperatures and flow rates to six regions: head, upper torso, lower torso, arms, thighs, and lower legs. Experiments with and without the cooling suit were conducted with five test subjects standing and walking on a treadmill on selected schedules. Steady state and, to a lesser extent, transient characteristics were obtained.

Effect of air gap on apparent temperature of body wearing various sizes of T-shirt

NASA Astrophysics Data System (ADS)

Takatera, M.; Uchiyama, E.; Zhu, C.; Kim, KO; Ishizawa, H.

2017-10-01

We investigated the effect of air gap on the apparent temperature. Using the developed thermocouple fabric and a thermal manikin, we measured temperature distribution of the measuring garments due to the change of T-shirt sizes. We were able to measure the apparent temperature distribution at points near a body while wearing different sizes of T-shirts. It was observed that the temperature distribution depending on different air gap between clothing and body. The apparent temperature depends on garment size and place. The effect of air gap on apparent temperature of body was experimentally confirmed.

Smart and hybrid materials: perspectives for their use in textile structures for better health care.

PubMed

Carosio, Stefano; Monero, Alessandra

2004-01-01

High tech materials such as Shape Memory Alloys can be effectively integrated in textiles, thus providing multifunctional garments with potential application to the health care industry or for simply improving the quality of life. The objective of the present paper is to describe the development of a novel hybrid fabric with embedded shape memory (Nitinol) wires, and the related clothing application with the capability of recovering any shape depending upon the environment and becoming superelastic. The use of these smart garments for biomedical applications will be illustrated, thus opening new perspectives for enhanced health care provision.

Apollo experience report: Crew provisions and equipment subsystem

NASA Technical Reports Server (NTRS)

Mcallister, F.

1972-01-01

A description of the construction and use of crew provisions and equipment subsystem items for the Apollo Program is presented. The subsystem is composed principally of survival equipment, bioinstrumentation devices, medical components and accessories, water- and waste-management equipment, personal-hygiene articles, docking aids, flight garments (excluding the pressure garment assembly), and various other crew-related accessories. Particular attention is given to items and assemblies that presented design, development, or performance problems: the crew optical alinement sight system, the metering water dispenser, and the waste-management system. Changes made in design and materials to improve the fire safety of the hardware are discussed.

Silk garments plus standard care compared with standard care for treating eczema in children: A randomised, controlled, observer-blind, pragmatic trial (CLOTHES Trial).

PubMed

Thomas, Kim S; Bradshaw, Lucy E; Sach, Tracey H; Batchelor, Jonathan M; Lawton, Sandra; Harrison, Eleanor F; Haines, Rachel H; Ahmed, Amina; Williams, Hywel C; Dean, Taraneh; Burrows, Nigel P; Pollock, Ian; Llewellyn, Joanne; Crang, Clare; Grundy, Jane D; Guiness, Juliet; Gribbin, Andrew; Mitchell, Eleanor J; Cowdell, Fiona; Brown, Sara J; Montgomery, Alan A

2017-04-01

The role of clothing in the management of eczema (also called atopic dermatitis or atopic eczema) is poorly understood. This trial evaluated the effectiveness and cost-effectiveness of silk garments (in addition to standard care) for the management of eczema in children with moderate to severe disease. This was a parallel-group, randomised, controlled, observer-blind trial. Children aged 1 to 15 y with moderate to severe eczema were recruited from secondary care and the community at five UK medical centres. Participants were allocated using online randomisation (1:1) to standard care or to standard care plus silk garments, stratified by age and recruiting centre. Silk garments were worn for 6 mo. Primary outcome (eczema severity) was assessed at baseline, 2, 4, and 6 mo, by nurses blinded to treatment allocation, using the Eczema Area and Severity Index (EASI), which was log-transformed for analysis (intention-to-treat analysis). A safety outcome was number of skin infections. Three hundred children were randomised (26 November 2013 to 5 May 2015): 42% girls, 79% white, mean age 5 y. Primary analysis included 282/300 (94%) children (n = 141 in each group). The garments were worn more often at night than in the day (median of 81% of nights [25th to 75th centile 57% to 96%] and 34% of days [25th to 75th centile 10% to 76%]). Geometric mean EASI scores at baseline, 2, 4, and 6 mo were, respectively, 9.2, 6.4, 5.8, and 5.4 for silk clothing and 8.4, 6.6, 6.0, and 5.4 for standard care. There was no evidence of any difference between the groups in EASI score averaged over all follow-up visits adjusted for baseline EASI score, age, and centre: adjusted ratio of geometric means 0.95, 95% CI 0.85 to 1.07, (p = 0.43). This confidence interval is equivalent to a difference of -1.5 to 0.5 in the original EASI units, which is not clinically important. Skin infections occurred in 36/142 (25%) and 39/141 (28%) of children in the silk clothing and standard care groups, respectively. Even if the small observed treatment effect was genuine, the incremental cost per quality-adjusted life year was £56,811 in the base case analysis from a National Health Service perspective, suggesting that silk garments are unlikely to be cost-effective using currently accepted thresholds. The main limitation of the study is that use of an objective primary outcome, whilst minimising detection bias, may have underestimated treatment effects. Silk clothing is unlikely to provide additional benefit over standard care in children with moderate to severe eczema. Current Controlled Trials ISRCTN77261365.

Modeling of fire smoke movement in multizone garments building using two open source platforms

NASA Astrophysics Data System (ADS)

Khandoker, Md. Arifur Rahman; Galib, Musanna; Islam, Adnan; Rahman, Md. Ashiqur

2017-06-01

Casualty of garment factory workers from factory fire in Bangladesh is a recurring tragedy. Smoke, which is more fatal than fire itself, often propagates through different pathways from lower to upper floors during building fire. Among the toxic gases produced from a building fire, carbon monoxide (CO) can be deadly, even in small amounts. This paper models the propagation and transportation of fire induced smoke (CO) that resulted from the burning of synthetic polyester fibers using two open source platforms, CONTAM and Fire Dynamics Simulator (FDS). Smoke migration in a generic multistoried garment factory building in Bangladesh is modeled using CONTAM where each floor is compartmentalized by different zones. The elevator and stairway shafts are modeled by phantom zones to simulate contaminant (CO) transport from one floor to upper floors. FDS analysis involves burning of two different stacks of polyester jacket of six feet height and with a maximum heat release rate per unit area of 1500kw/m2 over a storage area 50m2 and 150m2, respectively. The resulting CO generation and removal rates from FDS are used in CONTAM to predict fire-borne CO propagation in different zones of the garment building. Findings of the study exhibit that the contaminant flow rate is a strong function of the position of building geometry, location of initiation of fire, amount of burnt material, presence of AHU and contaminant generation and removal rate of CO from the source location etc. The transport of fire-smoke in the building Hallways, stairways and lifts are also investigated in detail to examine the safe egress of the occupants in case of fire.

Running Performance While Wearing a Heat Dissipating Compression Garment in Male Recreational Runners.

PubMed

Leoz-Abaurrea, Iker; Santos-Concejero, Jordan; Grobler, Lara; Engelbrecht, Louise; Aguado-Jiménez, Roberto

2016-12-01

Leoz-Abaurrea, I, Santos-Concejero, J, Grobler, L, Engelbrecht, L, and Aguado-Jiménez, R. Running performance while wearing a heat dissipating compression garment in male recreational runners. J Strength Cond Res 30(12): 3367-3372, 2016-The aim of this study was to investigate the effects of a heat dissipating compression garment (CG) during a running performance test. Ten male recreational runners (mean ± SD: age 23 ± 3 years; V[Combining Dot Above]O2max 55.8 ± 4.8 ml·kg·min) completed 2 identical sessions wearing either CG or conventional t-shirt (CON). Each trial included a 45-minute run at 60% of the peak treadmill speed (PTS) followed by a time to exhaustion (TTE) run at 80% of the PTS and a 10-minute recovery period. During the tests, thermoregulatory and cardiovascular responses were monitored. Participants wearing the CG displayed an impaired running performance (508 ± 281 vs. 580 ± 314 seconds, p = 0.046; effect size [ES] = 0.24). In addition, a higher respiratory exchange ratio (1.06 ± 0.04 vs. 1.02 ± 0.07, p = 0.01; ES = 0.70) was observed at TTE when wearing the CG in comparison to CON. Changes in core temperature did not differ between garments after the 45-minute run (p = 0.96; ES = 0.03) or TTE (1.97 ± 0.32 vs. 1.98 ± 0.38° C; p = 0.93; ES = 0.02) for CG and CON, respectively. During recovery, significantly higher heart rate and blood lactate values were observed when wearing CG (p ≤ 0.05). These findings suggest that the use of a heat dissipating CG may not improve running performance in male recreational runners during a running performance test to exhaustion.

Validation of the abrasion resistance test protocols and performance criteria of EN13595: The probability of soft tissue injury to motorcycle riders by abrasion resistance of their clothing.

PubMed

Meredith, Lauren; Hurren, Christopher; Clarke, Elizabeth; Fitzharris, Michael; Baldock, Matthew; de Rome, Liz; Olivier, Jake; Brown, Julie

2017-06-01

Motorcyclists represent an increasing proportion of road users globally and are increasingly represented in crash statistics. Soft tissue injuries are the most common type of injuries to crashed motorcyclists. These injuries can be prevented through the use of protective clothing designed for motorcycle use. However, the quality of such clothing is not controlled in many countries around the world. A European Standard was developed to assess the performance of clothing but as this is not mandatory, clothing certified to this Standard is difficult to obtain. Given the importance of this Standard, and that it has been validated only once, further validation work is required. In-depth crash investigation data were used to investigate the relationship between the abrasion resistance performance of clothing and real-world injury outcome. Clothing was collected from riders who crashed on public roads in Sydney and Newcastle, Australia. This clothing was tested according to the EU Standard and the time to hole was recorded. Hospital medical records were reviewed and the association between a rider suffering a soft tissue injury and the time-to-hole for the garment was examined. The probability of soft tissue injury for Level 1 Standard garments was between 40-60%, but more than 60% of garments tested failed to meet the minimum requirement. The findings of this study provide qualified support for the Standard, with a marginal association between time-to-hole and injury being found. This work supports the need for improved safety performance and an increased number of high performing garments being available to motorcyclists. Copyright © 2017 Elsevier Ltd and National Safety Council. All rights reserved.

The extent to which garments affect the assessment of body shapes of males from faceless CCTV images.

PubMed

Lucas, Teghan; Kumaratilake, Jaliya; Henneberg, Maciej

2014-01-01

Closed circuit television (CCTV) systems are being widely used in crime surveillance. The images produced are of poor quality often face details are not visible, however expert witnesses in the field of biological anthropology use morphological descriptions of body shapes in an attempt to identify persons of interest. These methods can be applied to individual images when other cues such as gait, are not present. Criminals commonly disguise their faces, but body shape characteristics can be used to distinguish a person of interest from others. Garments may distort the body shape appearance, thus this study was undertaken to investigate the effects of garments on the description of body shape from CCTV images. Twelve adult males representing a wide body shape range of Sheldonian somatotypes were photographed in identical garments comprising of tight fitting black shirt, horizontally striped shirt, padded leather jacket and in naked torso. These photographs were assessed by 51 males and females aged 18-50 years, with varying levels of education, and different experience in use of CCTV images for identification of people, to identify the 12 participants. The effect of assessors was not significant. They correctly distinguished 88.6% of individuals wearing the same wear, but could not match the same individuals wearing different wear above the random expectations. However, they matched somatotypes above random expectation. Type of clothing produced little bias in somatotype matching; ectomorphic component of individuals wearing black shirts and padded jackets was overestimated and underestimated, respectively. In conclusion, type of the wear had little effect in the description of individuals from CCTV images using the body shapes.

Development of a prototype automatic controller for liquid cooling garment inlet temperature

NASA Technical Reports Server (NTRS)

Weaver, C. S.; Webbon, B. W.; Montgomery, L. D.

1982-01-01

The development of a computer control of a liquid cooled garment (LCG) inlet temperature is descirbed. An adaptive model of the LCG is used to predict the heat-removal rates for various inlet temperatures. An experimental system that contains a microcomputer was constructed. The LCG inlet and outlet temperatures and the heat exchanger outlet temperature form the inputs to the computer. The adaptive model prediction method of control is successful during tests where the inlet temperature is automatically chosen by the computer. It is concluded that the program can be implemented in a microprocessor of a size that is practical for a life support back-pack.

Smarten up garments through knitting

NASA Astrophysics Data System (ADS)

Schwarz-Pfeiffer, A.; Obermann, M.; Weber, M. O.; Ehrmann, A.

2016-07-01

Smart textiles are a growing and fascinating field with enormous potential in the field of wearable electronics: shirts with integrated electrodes, socks stimulating the blood circulation or heating clothing are just a few examples of wearable, smart textile products. Most often, the technology of choice for on-the-body-worn smart textiles is knitting as it results in stretchable and, hence comfortable garments. This presentation explores the knitting technology in respect to smart textiles giving an overview of current research activities as well as commercially available products on the market. It further intends to foster the transfer of research approaches into business applications as well as to develop new challenging research ideas.

NASA Microclimate Cooling Challenges

NASA Technical Reports Server (NTRS)

Trevino, Luis A.

2004-01-01

The purpose of this outline form presentation is to present NASA's challenges in microclimate cooling as related to the spacesuit. An overview of spacesuit flight-rated personal cooling systems is presented, which includes a brief history of cooling systems from Gemini through Space Station missions. The roles of the liquid cooling garment, thermal environment extremes, the sublimator, multi-layer insulation, and helmet visor UV and solar coatings are reviewed. A second section is presented on advanced personal cooling systems studies, which include heat acquisition studies on cooling garments, heat rejection studies on water boiler & radiators, thermal storage studies, and insulation studies. Past and present research and development and challenges are summarized for the advanced studies.

Pilot Fullerton dons anti-g and ejection escape suit (EES) on middeck

NASA Image and Video Library

1982-03-31

S82-28922 (30 March 1982) --- Astronaut C. Gordon Fullerton, STS-3 pilot, floats upside down in the zero-gravity environment of the middeck area of the Earth-orbiting space shuttle Columbia as he dons a modified USAF high altitude pressure garment. The brownish ejection/escape suit is used by the astronauts at launch and entry. Most of the remainder of their mission time, they are attired in a blue constant-wear garment. Astronaut Jack R. Lousma, crew commander, took this picture with a 35mm camera. The crew spent eight full days in the reusable spacecraft, a shuttle record. Photo credit: NASA

Analysis of dynamics and fit of diving suits

NASA Astrophysics Data System (ADS)

Mahnic Naglic, M.; Petrak, S.; Gersak, J.; Rolich, T.

2017-10-01

Paper presents research on dynamical behaviour and fit analysis of customised diving suits. Diving suits models are developed using the 3D flattening method, which enables the construction of a garment model directly on the 3D computer body model and separation of discrete 3D surfaces as well as transformation into 2D cutting parts. 3D body scanning of male and female test subjects was performed with the purpose of body measurements analysis in static and dynamic postures and processed body models were used for construction and simulation of diving suits prototypes. All necessary parameters, for 3D simulation were applied on obtained cutting parts, as well as parameters values for mechanical properties of neoprene material. Developed computer diving suits prototypes were used for stretch analysis on areas relevant for body dimensional changes according to dynamic anthropometrics. Garment pressures against the body in static and dynamic conditions was also analysed. Garments patterns for which the computer prototype verification was conducted were used for real prototype production. Real prototypes were also used for stretch and pressure analysis in static and dynamic conditions. Based on the obtained results, correlation analysis between body changes in dynamic positions and dynamic stress, determined on computer and real prototypes, was performed.

Applications of FT-IR spectroscopy to the studies of esterification and crosslinking of cellulose by polycarboxylic acids: Part II. The performance of the crosslinked cotton fabrics

NASA Astrophysics Data System (ADS)

Wei, Weishu; Yang, Charles Q.

1998-06-01

Durable press finishing processes are commonly used in the textile industry to produce wrinkle-free cotton fabrics and garments. A durable press finishing agent forms covalent bands with cellulosic hydroxyl groups, thus crosslinking the cellulose molecules. The crosslinking of cellulose increases wrinkle resistance of the treated cotton fabric and reduces fabric mechanical strength. Wrinkle recovery angle (WRA) and tensile strength are the two most important parameters used to evaluate the performance of the crosslinked cotton fabrics and garments. In this study, we investigated the correlation between WRA and tensile strength on one hand, and the amount of crosslinkages formed by the crosslinking agents including dimethyloldihydroxylethyleneurea (DMDHEU) and 1,2,3,4-butanetetracarboxylic acid (BTCA) determined by FT-IR spectroscopy on the other hand. Linear regression curves between the carbonyl band absorbance, and WRA and tensile strength of the treated cotton fabric were developed. The data indicated that FT-IR spectroscopy is a reliable technique for predicting the performance of durable press finished cotton fabrics, therefore can be used as a convenient instrumental method for quality control in the textile and garment industry.

Nondestructive reactivation of chemical protective garments. Final report, June 1985-July 1989

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang, K.W.; Chang, S.Y.; Klemperer, E.

In the near future, chemical protective combat uniforms may be worn by Army personnel on a continuous basis. Activated carbon, the operative component, has diminished capacity for sorbing chemical agents after it has been exposed to dirt, sweat, cigarette smoke, engine exhaust, petroleum products and numerous other elements routinely present in the battlefield environment. This report summarizes the development of two nondestructive methods for cleaning and reactivating soiled chemical protective garments. Complete reactivation was achieved when the aqueous i-propanol iodine displacement method of Manes, which removed all but pure hydrocarbon oil soils from the current overgarment Type III foam ormore » Kynol activated carbon fiber material, was applied in nonaqueous solvent. Subsequently, a nonaqueous solvent method that requires less handling was chosen in designing a truck-mounted system. It features non-agitative flow of methylene chloride and methanol around the chemical-protective garments suspended between ultrasonic transducers. Both methods restore full sorptivity to the Type III foam liner. There is a one-time 10% loss of activated carbon without any loss of sorptivity. The volatile solvents are more easily removed, and can be economically recovered. Overall features of a mobile unit have been sketched.« less

A novel washing algorithm for underarm stain removal

NASA Astrophysics Data System (ADS)

Acikgoz Tufan, H.; Gocek, I.; Sahin, U. K.; Erdem, I.

2017-10-01

After contacting with human sweat which comprise around 27% sebum, anti-perspirants comprising aluminium chloride or its compounds form a jel-like structure whose solubility in water is very poor. In daily use, this jel-like structure closes sweat pores and hinders wetting of skin by sweat. However, when in contact with garments, they form yellowish stains at the underarm of the garments. These stains are very hard to remove with regular machine washing. In this study, first of all, we focused on understanding and simulating such stain formation on the garments. Two alternative procedures are offered to form jel-like structures. On both procedures, commercially available spray or deo-stick type anti-perspirants, standard acidic and basic sweat solutions and artificial sebum are used to form jel-like structures, and they are applied on fabric in order to get hard stains. Secondly, after simulation of the stain on the fabric, we put our efforts on developing a washing algorithm specifically designed for removal of underarm stains. Eight alternative washing algorithms are offered with varying washing temperature, amounts of detergent, and pre-stain removal procedures. Better algorithm is selected by comparison of Tristimulus Y values after washing.

Soft Smart Garments for Lower Limb Joint Position Analysis.

PubMed

Totaro, Massimo; Poliero, Tommaso; Mondini, Alessio; Lucarotti, Chiara; Cairoli, Giovanni; Ortiz, Jesùs; Beccai, Lucia

2017-10-12

Revealing human movement requires lightweight, flexible systems capable of detecting mechanical parameters (like strain and pressure) while being worn comfortably by the user, and not interfering with his/her activity. In this work we address such multifaceted challenge with the development of smart garments for lower limb motion detection, like a textile kneepad and anklet in which soft sensors and readout electronics are embedded for retrieving movement of the specific joint. Stretchable capacitive sensors with a three-electrode configuration are built combining conductive textiles and elastomeric layers, and distributed around knee and ankle. Results show an excellent behavior in the ~30% strain range, hence the correlation between sensors' responses and the optically tracked Euler angles is allowed for basic lower limb movements. Bending during knee flexion/extension is detected, and it is discriminated from any external contact by implementing in real time a low computational algorithm. The smart anklet is designed to address joint motion detection in and off the sagittal plane. Ankle dorsi/plantar flexion, adduction/abduction, and rotation are retrieved. Both knee and ankle smart garments show a high accuracy in movement detection, with a RMSE less than 4° in the worst case.

A knitted garment using intarsia technique for Heart Rate Variability biofeedback: Evaluation of initial prototype.

PubMed

Abtahi, F; Ji, G; Lu, K; Rödby, K; Seoane, F

2015-01-01

Heart rate variability (HRV) biofeedback is a method based on paced breathing at specific rate called resonance frequency by giving online feedbacks from user respiration and its effect on HRV. Since the HRV is also influence by different factors like stress and emotions, stress related to an unfamiliar measurement device, cables and skin electrodes may cover the underling effect of such kind of intervention. Wearable systems are usually considered as intuitive solutions which are more familiar to the end-user and can help to improve usability and hence reducing the stress. In this work, a prototype of a knitted garment using intarsia technique is developed and evaluated. Results show the satisfactory level of quality for Electrocardiogram and thoracic electrical bioimpedance i.e. for respiration monitoring as a part of HRV biofeedback system. Using intarsia technique and conductive yarn for making the connection instead of cables will reduce the complexity of fabrication in textile production and hence reduce the final costs in a final commercial product. Further development of garment and Android application is ongoing and usability and efficiency of final prototype will be evaluated in detail.

Physiological and perceptual effects of a cooling garment during simulated industrial work in the heat.

PubMed

Butts, Cory L; Smith, Cody R; Ganio, Matthew S; McDermott, Brendon P

2017-03-01

Evaluate physiological and perceptual responses using a phase change cooling (PCC) garment during simulated work in the heat. Twenty males wearing compression undergarments, coverall suit, gloves, and hard-hat, completed two randomly assigned trials (with PCC inserts or control, CON) of simulated industrial tasks in the heat (34.2 ± 0.05 °C, 54.7 ± 0.3%RH). Trials consisted of two 20 min work bouts, a maximum performance bout, and 10 min of recovery. Physiological strain index (PSI) was lower during PCC after the second work bout and during recovery (all P < 0.05). PCC reduced heat storage (27.0 ± 7.6 W m -2 ) compared to CON (42.7 ± 9.9 W m -2 , P < 0.001). Perceptual strain index (PeSI) was reduced with PCC compared to CON (P < 0.001), however performance outcomes were not different between trials (P = 0.10). PCC during work in the heat attenuated thermal, physiological, and perceptual strain. This PCC garment could increase safety and reduce occupational heat illness risk. Copyright © 2016 Elsevier Ltd. All rights reserved.

Soft Smart Garments for Lower Limb Joint Position Analysis

PubMed Central

Totaro, Massimo; Poliero, Tommaso; Mondini, Alessio; Lucarotti, Chiara; Cairoli, Giovanni; Ortiz, Jesùs; Beccai, Lucia

2017-01-01

Revealing human movement requires lightweight, flexible systems capable of detecting mechanical parameters (like strain and pressure) while being worn comfortably by the user, and not interfering with his/her activity. In this work we address such multifaceted challenge with the development of smart garments for lower limb motion detection, like a textile kneepad and anklet in which soft sensors and readout electronics are embedded for retrieving movement of the specific joint. Stretchable capacitive sensors with a three-electrode configuration are built combining conductive textiles and elastomeric layers, and distributed around knee and ankle. Results show an excellent behavior in the ~30% strain range, hence the correlation between sensors’ responses and the optically tracked Euler angles is allowed for basic lower limb movements. Bending during knee flexion/extension is detected, and it is discriminated from any external contact by implementing in real time a low computational algorithm. The smart anklet is designed to address joint motion detection in and off the sagittal plane. Ankle dorsi/plantar flexion, adduction/abduction, and rotation are retrieved. Both knee and ankle smart garments show a high accuracy in movement detection, with a RMSE less than 4° in the worst case. PMID:29023365

Thermoregulatory and Perceptual Effects of a Percooling Garment Worn Underneath an American Football Uniform.

PubMed

Keen, Megan L; Miller, Kevin C; Zuhl, Micah N

2017-11-01

Keen, ML, Miller, KC, and Zuhl, MN. Thermoregulatory and perceptual effects of a percooling garment worn underneath an American football uniform. J Strength Cond Res 31(11): 2983-2991, 2017-American football athletes are at the highest risk of developing exertional heat illness (EHI). We investigated whether percooling (i.e., cooling during exercise) garments affected perceptual or physiological variables in individuals exercising in the heat while wearing football uniforms. Twelve male participants (age = 24 ± 4 year, mass = 80.1 ± 8.5 kg, height = 182.5 ± 10.4 cm) completed this cross-over, counterbalanced study. On day 1, we measured peak oxygen consumption (V[Combining Dot Above]O2). On days 2 and 3, participants wore percooling garments with (ICE) or without (CON) ice packs over the femoral and brachial arteries. They donned a football uniform and completed 3, 20-minute bouts of treadmill exercise at ∼50% of peak V[Combining Dot Above]O2 (∼33° C, ∼42% relative humidity) followed by a 10-minute rest period. Ice packs were replaced every 20 minutes. Rating of perceived exertion (RPE), thermal sensation, and thirst sensation were measured before and after each exercise bout. Environmental symptoms questionnaire (ESQ) responses and urine specific gravity (Usg) were measured pretesting and after the last exercise bout. V[Combining Dot Above]O2, change in heart rate (ΔHR), and change in rectal temperature (ΔTrec) were measured every 5 minutes. Sweat rate, sweat volume, and percent hypohydration were calculated. No interactions (F17,187 ≤ 1.6, p ≥ 0.1) or main effect of cooling condition (F1,11 ≤ 1.4, p ≥ 0.26) occurred for ΔTrec, ΔHR, thermal sensation, thirst, RPE, ESQ, or Usg. No differences between conditions occurred for sweat volume, sweat rate, or percent hypohydration (t11 ≤ 0.7, p ≥ 0.25). V[Combining Dot Above]O2 differed between conditions over time (F15,165 = 3.3, p < 0.001); ICE was lower than CON at 30, 55, and 70 minutes (p ≤ 0.05). It is unlikely that these garments would prevent EHI or minimize dehydration in football athletes.

Silk garments plus standard care compared with standard care for treating eczema in children: A randomised, controlled, observer-blind, pragmatic trial (CLOTHES Trial)

PubMed Central

Thomas, Kim S.; Lawton, Sandra; Ahmed, Amina; Dean, Taraneh; Burrows, Nigel P.; Pollock, Ian; Grundy, Jane D.; Guiness, Juliet

2017-01-01

Background The role of clothing in the management of eczema (also called atopic dermatitis or atopic eczema) is poorly understood. This trial evaluated the effectiveness and cost-effectiveness of silk garments (in addition to standard care) for the management of eczema in children with moderate to severe disease. Methods and findings This was a parallel-group, randomised, controlled, observer-blind trial. Children aged 1 to 15 y with moderate to severe eczema were recruited from secondary care and the community at five UK medical centres. Participants were allocated using online randomisation (1:1) to standard care or to standard care plus silk garments, stratified by age and recruiting centre. Silk garments were worn for 6 mo. Primary outcome (eczema severity) was assessed at baseline, 2, 4, and 6 mo, by nurses blinded to treatment allocation, using the Eczema Area and Severity Index (EASI), which was log-transformed for analysis (intention-to-treat analysis). A safety outcome was number of skin infections. Three hundred children were randomised (26 November 2013 to 5 May 2015): 42% girls, 79% white, mean age 5 y. Primary analysis included 282/300 (94%) children (n = 141 in each group). The garments were worn more often at night than in the day (median of 81% of nights [25th to 75th centile 57% to 96%] and 34% of days [25th to 75th centile 10% to 76%]). Geometric mean EASI scores at baseline, 2, 4, and 6 mo were, respectively, 9.2, 6.4, 5.8, and 5.4 for silk clothing and 8.4, 6.6, 6.0, and 5.4 for standard care. There was no evidence of any difference between the groups in EASI score averaged over all follow-up visits adjusted for baseline EASI score, age, and centre: adjusted ratio of geometric means 0.95, 95% CI 0.85 to 1.07, (p = 0.43). This confidence interval is equivalent to a difference of −1.5 to 0.5 in the original EASI units, which is not clinically important. Skin infections occurred in 36/142 (25%) and 39/141 (28%) of children in the silk clothing and standard care groups, respectively. Even if the small observed treatment effect was genuine, the incremental cost per quality-adjusted life year was £56,811 in the base case analysis from a National Health Service perspective, suggesting that silk garments are unlikely to be cost-effective using currently accepted thresholds. The main limitation of the study is that use of an objective primary outcome, whilst minimising detection bias, may have underestimated treatment effects. Conclusions Silk clothing is unlikely to provide additional benefit over standard care in children with moderate to severe eczema. Trial registration Current Controlled Trials ISRCTN77261365 PMID:28399154

3D quantification of microclimate volume in layered clothing for the prediction of clothing insulation.

PubMed

Lee, Yejin; Hong, Kyunghi; Hong, Sung-Ae

2007-05-01

Garment fit and resultant air volume is a crucial factor in thermal insulation, and yet, it has been difficult to quantify the air volume of clothing microclimate and relate it to the thermal insulation value just using the information on the size of clothing pattern without actual 3D volume measurement in wear condition. As earlier methods for the computation of air volume in clothing microclimate, vacuum over suit and circumference model have been used. However, these methods have inevitable disadvantages in terms of cost or accuracy due to the limitations of measurement equipment. In this paper, the phase-shifting moiré topography was introduced as one of the 3D scanning tools to measure the air volume of clothing microclimate quantitatively. The purpose of this research is to adopt a non-contact image scanning technology, phase-shifting moiré topography, to ascertain relationship between air volume and insulation value of layered clothing systems in wear situations where the 2D fabric creates new conditions in 3D spaces. The insulation of vests over shirts as a layered clothing system was measured with a thermal manikin in the environmental condition of 20 degrees C, 65% RH and air velocity of 0.79 m/s. As the pattern size increased, the insulation of the clothing system was increased. But beyond a certain limit, the insulation started to decrease due to convection and ventilation, which is more apparent when only the vest was worn over the torso of manikin. The relationship between clothing air volume and insulation was difficult to predict with a single vest due to the extreme openings which induced active ventilation. But when the vest was worn over the shirt, the effects of thickness of the fabrics on insulation were less pronounced compared with that of air volume. In conclusion, phase-shifting moiré topography was one of the efficient and accurate ways of quantifying air volume and its distribution across the clothing microclimate. It is also noted that air volume becomes more crucial factor in predicting thermal insulation when clothing is layered.

Non-Volatile Residue (NVR) Contamination from Dry Handling and Solvent Cleaning

NASA Technical Reports Server (NTRS)

Sovinski, Marjorie F.

2009-01-01

This slide presentation reviews the testing for Non-Volatile Residue contamination transferred to surfaces from handling and solvent cleaning. Included in the presentation is a list of the items tested, formal work instructions dealing with NVR. There is an explanation of the Gravimetric determination method used to test the NVR in a variety of items, i.e., Gloves, Swabs, Garments, Bagging material, film and Wipes. Another method to test for contamination from NVR is the contact transfer method. The use of this method for testing gloves, garments, bagging material and film is explained. Certain equations use in NVR analysis and the use of a database for testing of NVR in consumables are reviewed.

Intelligent Medical Garments with Graphene-Functionalized Smart-Cloth ECG Sensors.

PubMed

Yapici, Murat Kaya; Alkhidir, Tamador Elboshra

2017-04-16

Biopotential signals are recorded mostly by using sticky, pre-gelled electrodes, which are not ideal for wearable, point-of-care monitoring where the usability of the personalized medical device depends critically on the level of comfort and wearability of the electrodes. We report a fully-wearable medical garment for mobile monitoring of cardiac biopotentials from the wrists or the neck with minimum restriction to regular clothing habits. The wearable prototype is based on elastic bands with graphene functionalized, textile electrodes and battery-powered, low-cost electronics for signal acquisition and wireless transmission. Comparison of the electrocardiogram (ECG) recordings obtained from the wearable prototype against conventional wet electrodes indicate excellent conformity and spectral coherence among the two signals.

Ice Pack Heat Sink Subsystem - Phase I. [astronaut liquid cooling garment design and testing

NASA Technical Reports Server (NTRS)

Roebelen, G. J., Jr.

1973-01-01

This paper describes the design and test at one-g of a functional laboratory model (non-flight) Ice Pack Heat Sink Subsystem to be used eventually for astronaut cooling during manned space missions. In normal use, excess heat in the liquid cooling garment (LCG) coolant is transferred to a reusable/regenerable ice pack heat sink. For emergency operation, or for extension of extravehicular activity mission time after all the ice has melted, water from the ice pack is boiled to vacuum, thereby continuing to remove heat from the LCG coolant. This subsystem incorporates a quick connect/disconnect thermal interface between the ice pack heat sink and the subsystem heat exchanger.

Modeling heat and moisture transport in firefighter protective clothing during flash fire exposure

NASA Astrophysics Data System (ADS)

Chitrphiromsri, Patirop; Kuznetsov, Andrey V.

2005-01-01

In this paper, a model of heat and moisture transport in firefighter protective clothing during a flash fire exposure is presented. The aim of this study is to investigate the effect of coupled heat and moisture transport on the protective performance of the garment. Computational results show the distribution of temperature and moisture content in the fabric during the exposure to the flash fire as well as during the cool-down period. Moreover, the duration of the exposure during which the garment protects the firefighter from getting second and third degree burns from the flash fire exposure is numerically predicted. A complete model for the fire-fabric-air gap-skin system is presented.

Chemochromic Detector for Sensing Gas Leakage and Process for Producing the Same

NASA Technical Reports Server (NTRS)

Williams, Martha K. (Inventor); Captain, Janine E. (Inventor); Roberson, Luke B. (Inventor); Tate, LaNetra Clayton (Inventor)

2015-01-01

A chemochromic sensor for detecting a combustible gas, such as hydrogen, includes a chemochromic pigment and a textile polymer. The textile material includes a chemochromic pigment operably responsive to a combustible gas. The combustible gas sensing textile material can be made by melt spinning, solution spinning, or other similar techniques. In a preferred embodiment carbon nanotubes are used with the textile material which will increase the material strength and alter the thermal and/or electrical properties. These textiles woven into fabrics can provide garments not only with hydrogen sensing capabilities but the carbon nanotubes will allow for a range of sensing capabilities to be embedded (i.e. gas, health, and electronic monitors) within the garments.

Risk of Orthostatic Intolerance During Re-Exposure to Gravity

NASA Technical Reports Server (NTRS)

Platts, Steven; Stenger, Michael B.; Lee, Stuart M. C.; Westby, Christian M.; Phillips, Tiffany R.; Arzeno, Natalia M.; Johnston, Smith; Mulugeta, Lealem

2015-01-01

Post-spaceflight orthostatic intolerance remains a significant concern to NASA. In Space Shuttle missions, astronauts wore anti-gravity suits and liquid cooling garments to protect against orthostatic intolerance during re-entry and landing, but in-flight exercise and the end-of-mission fluid loading failed to protect approximately 30% of Shuttle astronauts when these garments were not worn. The severity of the problem appears to be increased after long-duration space flight. Five of six US astronauts could not complete a 10-minutes upright-posture tilt testing on landing day following 4-5 month stays aboard the Mir space station. The majority of these astronauts had experienced no problems of orthostatic intolerance following their shorter Shuttle flights. More recently, four of six US astronauts could not complete a tilt test on landing day following approximately 6 month stays on the International Space Station. Similar observations were made in the Soviet and Russian space programs, such that some cosmonauts wear the Russian compression garments (Kentavr) up to 4 days after landing. Future exploration missions, such as those to Mars or Near Earth Objects, will be long duration, and astronauts will be landing on planetary bodies with no ground-support teams. The occurrence of severe orthostatic hypotension could threaten the astronauts' health and safety and success of the mission.

Limited effectiveness of heat acclimation to soldiers wearing US Army and US Air Force chemical protective clothing. Technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang, S.K.; Gonzalez, R.R.

1995-11-01

Heat acclilmation-induced sweating responses have the potential of reducing heat strain for soldiers wearing chemical protective garment. However, this potential benefit is strongly affected by the properties of the garment. If the clothing ensemble permits sufficient evaporative heat dissipation, then heat acclimation becomes helpful in reducing heat strain. On the other hand, if the garment creates an impenetrable barrier to moisture, no benefit can be gained from heat acclimation as the additional sweating cannot be evaporated. We studied 10 subjects exercising on a treadmill while wearing two different U.S. military chemical protective ensembles. Skin heat flux, skin temperature, core temperature,more » metabolic heat production, and heart rate were measured. We found that the benefit of heat acclimation is strongly dependent on an unimpeded ability of evaporative heat loss from skin areas. The evaporative potential (EP), a measure of thermal insulation modified by moisture permeability, of the clothing ensemble offers a quantitative index useful to determine whether heat acclimation is helpful while protective clothing system. Our data show that when EP is less than 15%, heat acclimation affords no benefit. An evaporative potential graph is created to aid in this determination.« less

Effects of physical activity programmes in the workplace (PAPW) on the perception and intensity of musculoskeletal pain experienced by garment workers.

PubMed

Pereira, Cynara Cristina Domingues Alves; López, Ramón Fabian Alonso; Vilarta, Roberto

2013-01-01

The physical activity programmes in the workplace (PAPW) are applied to minimize the prevalence, incidence and intensity of pain. This study evaluated the perception of pain and quantifies its intensity among garment workers before and after performing a PAPW. We included 61 workers of a clothing company, who were classified randomly into experimental group (n = 44) 28.7 ± 8.8 years old and a control group (n = 17) 27.8 ± 7.4 years (20-43 years). The Trigger Points test questionnaire was used to assess pain perception and quantify its intensity. The PAPW was conducted in 15-minute sessions per day, consisting of stretching exercises (40%), muscular endurance (40%), self-massage relaxation and massage techniques (10%), and group dynamics (10%). The garment workers who participated in the PAPW showed a significant reduction of pain felt in the neck and wrists, and also a reduction in pain intensity in shoulders, arms, fingers and wrists that are most often strained during sewing. Our findings suggest that PAPW that target muscle groups that are more tense in sewing tasks, may be considered by companies for supporting adaptation to the work environment and improving health by reducing muscle and joint pain.

Post-Fordist technology and the changing patterns of women's employment in the Third World.

PubMed

Nanda, M

2000-01-01

Literate but unskilled--and largely female--labor has thus far fueled the tremendous increase in manufactured exports of garments and microelectronic products from the Third World to the industrially advanced economies of the North. The future growth of these sectors, however, may require literate and skilled workers--a category in which women are woefully under-represented, especially in the Third World. In the case of the garment industry, defensive innovation in the industrially advanced countries, including automation and flexible management, has initiated a relocation of jobs to these countries or to offshore locations geographically close to their markets. Automated garment production in these countries requires fewer but computer-literate workers. In the case of microelectronics, development policies of East Asian countries and the competitive pressures on start-up companies in the North have led to an increased demand for computer-literate, skilled technicians over the unskilled and overwhelmingly female workforce of manual-assembly workers. Women's continued employment and advancement in these industries globally will depend upon their acquisition of new technical skills. The ratification by the 1995 international women's conference at Beijing of the demand for better access to education and skills training for women, especially in the Third World, is a step in the right direction.

Effect of moisture transport on microclimate under T-shirts.

PubMed

Dai, Xiao-Qun; Imamura, Ritsuko; Liu, Guo-Lian; Zhou, Fu-Ping

2008-09-01

Water transport through garments has influence on the microclimate between the garments and the body beneath; thus the thermal comfort feeling for the wearer. Soybean protein fiber (SPF), a new type environmental fiber, which has been reported to be superior in water transfer, is often blended with cotton to improve the water transport property. In this paper, T-shirts made of this SPF/cotton blended fabric were focused in comparison with T-shirts made of cotton fabric. Wicking and immersion tests were carried out on the two types of fabrics to investigate the water transport and absorption properties, respectively; wear trials of T-shirts made of the fabrics were also conducted. Comparing with the cotton fabric which had better water absorptive property, it was found that the blended fabric with superior wicking ability could not only delay the increase of the vapor pressure under the T-shirt at the beginning of the exercise, but also help to keep it lower through the exercise significantly, and also kept the skin temperature under the T-shirt lower. It was made clear that it is the water transfer property rather than the water absorption property helps to take away sweat quickly and prevents the increase of the humidity and temperature at skin surface, thus maintaining a comfort microclimate under garments.

Effect of armor and carrying load on body balance and leg muscle function.

PubMed

Park, Huiju; Branson, Donna; Kim, Seonyoung; Warren, Aric; Jacobson, Bert; Petrova, Adriana; Peksoz, Semra; Kamenidis, Panagiotis

2014-01-01

This study investigated the impact of weight and weight distribution of body armor and load carriage on static body balance and leg muscle function. A series of human performance tests were conducted with seven male, healthy, right-handed military students in seven garment conditions with varying weight and weight distributions. Static body balance was assessed by analyzing the trajectory of center of plantar pressure and symmetry of weight bearing in the feet. Leg muscle functions were assessed by analyzing the peak electromyography amplitude of four selected leg muscles during walking. Results of this study showed that uneven weight distribution of garment and load beyond an additional 9 kg impaired static body balance as evidenced by increased sway of center of plantar pressure and asymmetry of weight bearing in the feet. Added weight on non-dominant side of the body created greater impediment to static balance. Increased garment weight also elevated peak EMG amplitude in the rectus femoris to maintain body balance and in the medial gastrocnemius to increase propulsive force. Negative impacts on balance and leg muscle function with increased carrying loads, particularly with an uneven weight distribution, should be stressed to soldiers, designers, and sports enthusiasts. Copyright © 2013 Elsevier B.V. All rights reserved.

Design features to enhance external hip protector adherence in the nursing home setting.

PubMed

Honkanen, Lisa A; Dehner, Melissa L; Lachs, Mark S

2006-11-01

To determine the preferences for external hip protector (EHP) design features of both certified nursing assistants (CNAs) and nursing home laundry personnel, and to test the durability of favored model features. Cross-sectional descriptive study of CNAs' and laundry personnels' preferences and a prospective experimental study of EHP fastener durability under institutional laundry conditions. Three urban nursing homes and a hospital-based laundry service. Twenty-seven CNAs, 4 laundry service supervisors. Five focus groups with CNAs and a survey of laundry supervisors were conducted to elicit preferences of EHP design features with an emphasis on convenience and durability. A laundry test of 20 EHPs was conducted to compare these design features. There was wide agreement among CNAs and laundry personnel that EHPs with soft pads in garments of light neutral colors, and cotton-blend fabrics were most preferred. CNAs preferred sewn-in pads to removeable ones, but laundry personnel had no consensus on this issue. For dependent residents, wraparound (front opening) garments using Velcro were preferred by CNAs, whereas laundry supervisors preferred snap closures. When EHP underwent repeated washing in the laundry test, Velcro and snaps were functionally comparable at 52 cycles. Garments constructed of heavyweight cotton blends, polyester, or cotton with spandex maintained elasticity at 52 weeks, whereas the lightweight cotton blend stretched significantly. Based on CNAs' preferences, laundry personnels' input, and a laundry test, EHP design features that could enhance both caregiver efficiency and resident comfort include soft pads sewn into a light-colored (but non-white) heavier weight cotton-blend garment, with the availability of both a pull-up style and a wraparound style using Velcro fasteners. Snaps did not demonstrate superior durability in the laundry test, but further comparison with Velcro under clinical conditions is indicated. Education and inclusion of CNAs in EHP decision making are important ways to improve EHP adherence.

Morbidity patterns, nutritional status, and healthcare-seeking behavior of female garment workers in Bangladesh

PubMed Central

Hasnain, Golam; Akter, Monjura; Sharafat, Shadab Ibn; Mahmuda, Ayesha

2014-01-01

Background: The ready-made garment (RMG) sector is the main pillar of Bangladesh’s economy, and female garment workers are the key workers in this sector. Unfortunately, they are paid very little; in fact, their pay is among the lowest anywhere in the world. This situation makes the workers very vulnerable to different kinds of health-related problems, including malnutrition, and it also results in their having poor healthcare-seeking behavior. So, the aim of this study was to determine their nutritional status, their various kinds of health-related problems, and their healthcare-seeking behavior. Methods: This was a cross-sectional study in which purposive sampling was done. Data were collected through a structured questionnaire, and the participants’ heights and weights were measured according the guidelines provided by the World Health Organization (WHO). All data were computed and analyzed using SPSS version 16.01 software. Chi squared values were calculated to analyze the data and the prevalence rate ratio (PRR) was measured to determine the association of body mass index (BMI) with health problems. Results: More than half of the participants (53.67%) had various health problems, and almost half of them (43.33%) were underweight (BMI ≤ 18.5 kg/m2). Among those who were underweight, about 96% of them had one or more health-related problems in the last three months (P-value < 0.001). Their PRR was 2.59, which comprises low BMI as a risk factor for high morbidity. Among the workers who had one or more health-related problems, more than 22% of them did not go to see a doctor during their illnesses. Only about 12% of them went to qualified practitioners, and, surprisingly, 37% of those completed the prescribed treatment. Conclusion: The study showed that there is high morbidity among female garment workers who have low BMI values and poor healthcare-seeking behavior, factors that should be addressed by their employers and policy makers. PMID:25763149

The European standard for sun-protective clothing: EN 13758.

PubMed

Gambichler, T; Laperre, J; Hoffmann, K

2006-02-01

Clothing is considered one of the most important tools for sun protection. Contrary to popular opinion, however, some summer fabrics provide insufficient ultraviolet (UV) protection. The European Committee for Standardization (CEN), has developed a new standard on requirements for test methods and labelling of sun-protective garments. This document has now been completed and is published. Within CEN, a working group, CEN/TC 248 WG14 'UV protective clothing', was set up with the mission to produce standards on the UV-protective properties of textile materials. This working group started its activities in 1998 and included 30 experts (dermatologists, physicists, textile technologists, fabric manufacturers and retailers of apparel textiles) from 11 European member states. Within this working group, all medical, ethical, technical and economical aspects of standardization of UV-protective clothing were discussed on the basis of the expertise of each member and in consideration of the relevant literature in this field. Decisions were made in consensus. The first part of the standard (EN 13758-1) deals with all details of test methods (e.g. spectrophotometric measurements) for textile materials and part 2 (EN 13758-2) covers classification and marking of apparel textiles. UV-protective cloths for which compliance with this standard is claimed must fulfill all stringent instructions of testing, classification and marking, including a UV protection factor (UPF) larger than 40 (UPF 40+), average UVA transmission lower than 5%, and design requirements as specified in part 2 of the standard. A pictogram, which is marked with the number of the standard EN 13758-2 and the UPF of 40+, shall be attached to the garment if it is in compliance with the standard. The dermatology community should take cognizance of this new standard document. Garment manufacturers and retailers may now follow these official guidelines for testing and labelling of UV-protective summer clothes, and the sun-aware consumer can easily recognize garments that definitely provide sufficient UV protection.

Procedures to evaluate the efficiency of protective clothing worn by operators applying pesticide.

PubMed

Espanhol-Soares, Melina; Nociti, Leticia A S; Machado-Neto, Joaquim Gonçalves

2013-10-01

The evaluation of the efficiency of whole-body protective clothing against pesticides has already been carried out through field tests and procedures defined by international standards, but there is a need to determine the useful life of these garments to ensure worker safety. The aim of this article is to compare the procedures for evaluating efficiency of two whole-body protective garments, both new and previously used by applicators of herbicides, using a laboratory test with a mannequin and in the field with the operator. The evaluation of the efficiency of protective clothing used both quantitative and qualitative methodologies, leading to a proposal for classification according to efficiency, and determination of the useful life of protective clothing for use against pesticides, based on a quantitative assessment. The procedures used were in accordance with the standards of the modified American Society for Testing and Materials (ASTM) F 1359:2007 and International Organization for Standardization 17491-4. The protocol used in the field was World Health Organization Vector Biology and Control (VBC)/82.1. Clothing tested was personal water repellent and pesticide protective. Two varieties of fabric were tested: Beige (100% cotton) and Camouflaged (31% polyester and 69% cotton). The efficiency in exposure control of the personal protective clothing was measured before use and after 5, 10, 20, and 30 uses and washes under field conditions. Personal protective clothing was worn by workers in the field during the application of the herbicide glyphosate on weed species in mature sugar cane plantations using a knapsack sprayer. The modified ASTM 1359:2007 procedure was chosen as the most appropriate due to its greater repeatability (lower coefficient of variation). This procedure provides quantitative evaluation needed to determine the efficiency and useful life of individual protective clothing, not just at specific points of failure, but according to dermal protection as a whole. The qualitative assessment, which is suitable for verification of garment design and stitching flaws, does not aid in determining useful life, but does complement the quantitative evaluation. The proposed classification is appropriate and accurate for determining the useful life of personal protective clothing against pesticide materials relative to number of uses and washes after each use. For example, the Beige garment had a useful life of 30 uses and washes, while the Camouflaged garment had a useful life of 5 uses and washes. The quantitative evaluation aids in determining the efficiency and useful life of individual protective clothing according to dermal protection as a whole, not just at specific points of failure.

3D Product Development for Loose-Fitting Garments Based on Parametric Human Models

NASA Astrophysics Data System (ADS)

Krzywinski, S.; Siegmund, J.

2017-10-01

Researchers and commercial suppliers worldwide pursue the objective of achieving a more transparent garment construction process that is computationally linked to a virtual body, in order to save development costs over the long term. The current aim is not to transfer the complete pattern making step to a 3D design environment but to work out basic constructions in 3D that provide excellent fit due to their accurate construction and morphological pattern grading (automatic change of sizes in 3D) in respect of sizes and body types. After a computer-aided derivation of 2D pattern parts, these can be made available to the industry as a basis on which to create more fashionable variations.

Medea's Nuptial Gifts: Myth and Biomedical Reality.

PubMed

Diamandopoulos, Athanasios

2016-12-01

In all art forms, Medea is mainly represented as the tragic witch from Colchis (contemporary Georgia), who slaughtered her sons and killed her erotic rival Glauke and her father, King Creon of Corinth, by offering an elaborate poisonous nuptial garment. Euripides described the victims' symptoms as a sudden extreme inflammation, leading anyone coming into contact with the garment to death. In other version, the inflammation is described as pure fire. The symptoms resemble what current medical knowledge describes as an immune contact sensitivity reaction. The passages with medical interest from the opera based on this tragedy are presented in the original musical form as well as some similar film and theater scenes. Magnified images of harmful insect's Medea's nuptial gifts are shown and their action is discussed.

Intelligent Medical Garments with Graphene-Functionalized Smart-Cloth ECG Sensors

PubMed Central

Yapici, Murat Kaya; Alkhidir, Tamador Elboshra

2017-01-01

Biopotential signals are recorded mostly by using sticky, pre-gelled electrodes, which are not ideal for wearable, point-of-care monitoring where the usability of the personalized medical device depends critically on the level of comfort and wearability of the electrodes. We report a fully-wearable medical garment for mobile monitoring of cardiac biopotentials from the wrists or the neck with minimum restriction to regular clothing habits. The wearable prototype is based on elastic bands with graphene functionalized, textile electrodes and battery-powered, low-cost electronics for signal acquisition and wireless transmission. Comparison of the electrocardiogram (ECG) recordings obtained from the wearable prototype against conventional wet electrodes indicate excellent conformity and spectral coherence among the two signals. PMID:28420158

Biosensing and environmental sensing for emergency and protection e-Textiles.

PubMed

Magenes, G; Curone, D; Secco, E L; Bonfiglio, A

2011-01-01

The ProeTEX project introduced for the first time a complete set of smart garments integrating sensors for the physiological and environmental monitoring of emergency operators. These "smart" garments have been deeply tested in emergency-like contexts by professional rescuers, in order to assess real-time acquisition, processing and transmission of data from moving subjects while operating in harsh conditions. Here we report an overview of the main results obtained during field trials performed in 2010 by Italian and French professional firefighters, in specialized training centers, while dressing the ProeTEX prototypes. Results clearly demonstrate the benefit and step forward of such a system in order to monitor and coordinate rescuers even during intervention far away from the emergency headquarter.

Bangladesh: currently the worst, but possibly the future's best.

PubMed

Brown, Garrett

2015-02-01

Garment workers in Bangladesh producing clothing for international brands have experienced repeated factory fires and building collapses in the last 10 years, resulting in more than 1,600 deaths and hundreds of disabling injuries. After the Tazreen Fashion fire in December 2012 and the Rana Plaza building collapse in April 2013, more than 190 international clothing brands and retailers signed an "Accord on Fire and Building Safety" with two international union federations. Full implementation of the provisions of the Accord would change "business as usual" in Bangladesh's garment industry and set a positive example for other countries and other industries with global supply chains. The components, challenges, and controversies of the Accord are detailed in the article. © 2015 SAGE Publications.

Wearable Wireless Telemetry System for Implantable Bio-MEMS Sensors

NASA Technical Reports Server (NTRS)

Simons, Rainee N.; Miranda, Felix A.; Wilson, Jeffrey D.; Simons, Renita E.

2006-01-01

In this paper, a telemetry and contact-less powering system consisting of an implantable bio-MEMS sensor with a miniature printed square spiral chip antenna and an external wearable garment with printed loop antenna is investigated. The wearable garment pick-up antenna and the implantable chip antenna are in close proximity to each other and hence couple inductively through their near-fields and behave as the primary and the secondary circuits of a transformer, respectively. The numerical and experimental results are graphically presented, and include the design parameter values as a function of the geometry, the relative RF magnetic near-field intensity as a function of the distance and angle, and the current density on the strip conductors, for the implantable chip antenna.

Design and characterization of a wearable macrobending fiber optic sensor for human joint angle determination

NASA Astrophysics Data System (ADS)

Silva, Ana S.; Catarino, André; Correia, Miguel V.; Frazão, Orlando

2013-12-01

The work presented here describes the development and characterization of intensity fiber optic sensor integrated in a specifically designed piece of garment to measure elbow flexion. The sensing head is based on macrobending incorporated in the garment, and the increase of curvature number was studied in order to investigate which scheme provided a good result in terms of sensitivity and repeatability. Results showed the configuration that assured a higher sensitivity (0.644 dBm/deg) and better repeatability was the one with four loops. Ultimately, this sensor can be used for rehabilitation purposes to monitor human joint angles, namely, elbow flexion on stroke survivors while performing the reach functional task, which is the most common upper-limb human gesture.

Health-Hazard Evaluation Report HETA 84-180-1776, Jacksonville Fire Department, Jacksonville, Florida

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kominsky, J.R.

1987-02-01

The efficiency of a trichlorotrifluoroethane based system to remove polychlorinated biphenyls (PCBs) from Nomex fabric garments used by the Jacksonville Fire Department, Jacksonville, Florida was evaluated. The system used a sealed dry cleaning machine with a revolving chamber and trichlorotrifluoroethane solvent. From 66 to 99% of fireborne PCB contamination and more than 99% of experimental contamination was removed from fire fighters protective clothing using the system. Because of uncertainty concerning the adequacy of decontamination, the garments were replaced. The author concludes that this system can remove a high percentage of PCB contamination; without established permissible limits for fabric levels ofmore » PCBs, it is not known if the level of decontamination is adequate.« less

Thermal Conductivity of Ethylene Vinyl Acetate Copolymer/Carbon Nanofiller Blends

NASA Technical Reports Server (NTRS)

Ghose, S.; Watson, K. A.; Working, D. C.; Connell, J. W.; Smith, J. G., Jr.; Lin, Y.; Sun, Y. P.

2007-01-01

To reduce weight and increase the mobility, comfort, and performance of future spacesuits, flexible, thermally conductive fabrics and plastic tubes are needed for the Liquid Cooling and Ventilation Garment. Such improvements would allow astronauts to operate more efficiently and safely for extended extravehicular activities. As an approach to raise the thermal conductivity (TC) of an ethylene vinyl acetate copolymer (Elvax 260), it was compounded with three types of carbon based nanofillers: multi-walled carbon nanotubes (MWCNTs), vapor grown carbon nanofibers (CNFs), and expanded graphite (EG). In addition, other nanofillers including metallized CNFs, nickel nanostrands, boron nitride, and powdered aluminum were also compounded with Elvax 260 in the melt at various loading levels. In an attempt to improve compatibility between Elvax 260 and the nanofillers, MWCNTs and EG were modified by surface coating and through noncovalent and covalent attachment of organic molecules containing alkyl groups. Ribbons of the nanocomposites were extruded to form samples in which the nanofillers were aligned in the direction of flow. Samples were also fabricated by compression molding to yield nanocomposites in which the nanofillers were randomly oriented. Mechanical properties of the aligned samples were determined by tensile testing while the degree of dispersion and alignment of nanoparticles were investigated using high-resolution scanning electron microscopy. TC measurements were performed using a laser flash (Nanoflash ) technique. TC of the samples was measured in the direction of, and perpendicular to, the alignment direction. Additionally, tubing was also extruded from select nanocomposite compositions and the TC and mechanical flexibility measured.

Thermal Conductivity of Ethylene Vinyl Acetate Copolymer/Nanofiller Blends

NASA Technical Reports Server (NTRS)

Ghose, S.; Watson, K. A.; Working, D. C.; Connell, J. W.; Smith, J. G., Jr.; Lin, Y.; Sun, Y. P.

2007-01-01

To reduce weight and increase the mobility, comfort, and performance of future spacesuits, flexible, thermally conductive fabrics and plastic tubes are needed for the Liquid Cooling and Ventilation Garment. Such improvements would allow astronauts to operate more efficiently and safely for extended extravehicular activities. As an approach to raise the thermal conductivity (TC) of an ethylene vinyl acetate copolymer (Elvax 260), it was compounded with three types of carbon based nanofillers: multi-walled carbon nanotubes (MWCNTs), vapor grown carbon nanofibers (CNFs), and expanded graphite (EG). In addition, other nanofillers including metallized CNFs, nickel nanostrands, boron nitride, and powdered aluminum were also compounded with Elvax 260 in the melt at various loading levels. In an attempt to improve compatibility between Elvax 260 and the nanofillers, MWCNTs and EG were modified by surface coating and through noncovalent and covalent attachment of organic molecules containing alkyl groups. Ribbons of the nanocomposites were extruded to form samples in which the nanofillers were aligned in the direction of flow. Samples were also fabricated by compression molding to yield nanocomposites in which the nanofillers were randomly oriented. Mechanical properties of the aligned samples were determined by tensile testing while the degree of dispersion and alignment of nanoparticles were investigated using high-resolution scanning electron microscopy. TC measurements were performed using a laser flash (Nanoflash ) technique. TC of the samples was measured in the direction of, and perpendicular to, the alignment direction. Additionally, tubing was also extruded from select nanocomposite compositions and the TC and mechanical flexibility measured.

Thermal Conductivity of Ethylene Vinyl Acetate Copolymer/Nanofiller Blends

NASA Technical Reports Server (NTRS)

Ghose, Sayata; Watson, Kent A.; Working, Dennis C.; Connell, John W.; Smith, Joseph G., Jr.; Lin, Y.; Sun, Y. P.

2007-01-01

To reduce weight and increase the mobility, comfort, and performance of future spacesuits, flexible, thermally conductive fabrics and plastic tubes are needed for the Liquid Cooling and Ventilation Garment. Such improvements would allow astronauts to operate more efficiently and safely for extended extravehicular activities. As an approach to raise the thermal conductivity (TC) of an ethylene vinyl acetate copolymer (Elvax(TM)260), it was compounded with three types of carbon based nanofillers: multi-walled carbon nanotubes (MWCNTs), vapor grown carbon nanofibers (CNFs), and expanded graphite (EG). In addition, other nanofillers including metallized CNFs, nickel nanostrands, boron nitride, and powdered aluminum were also compounded with Elvax(TM) 260 in the melt at various loading levels. In an attempt to improve compatibility between Elvax 260 and the nanofillers, MWCNTs and EG were modified by surface coating and through noncovalent and covalent attachment of organic molecules containing alkyl groups. Ribbons of the nanocomposites were extruded to form samples in which the nanofillers were aligned in the direction of flow. Samples were also fabricated by compression molding to yield nanocomposites in which the nanofillers were randomly oriented. Mechanical properties of the aligned samples were determined by tensile testing while the degree of dispersion and alignment of nanoparticles were investigated using high-resolution scanning electron microscopy. TC measurements were performed using a laser flash (Nanoflash(TM)) technique. TC of the samples was measured in the direction of, and perpendicular to, the alignment direction. Additionally, tubing was also extruded from select nanocomposite compositions and the TC and mechanical flexibility measured.

Environmental considerations in the selection of isolation gowns: A life cycle assessment of reusable and disposable alternatives.

PubMed

Vozzola, Eric; Overcash, Michael; Griffing, Evan

2018-04-11

Isolation gowns serve a critical role in infection control by protecting healthcare workers, visitors, and patients from the transfer of microorganisms and body fluids. The decision of whether to use a reusable or disposable garment system is a selection process based on factors including sustainability, barrier effectiveness, cost, and comfort. Environmental sustainability is increasingly being used in the decision-making process. Life cycle assessment is the most comprehensive and widely used tool used to evaluate environmental performance. The environmental impacts of market-representative reusable and disposable isolation gown systems were compared using standard life cycle assessment procedures. The basis of comparison was 1,000 isolation gown uses in a healthcare setting. The scope included the manufacture, use, and end-of-life stages of the gown systems. At the healthcare facility, compared to the disposable gown system, the reusable gown system showed a 28% reduction in energy consumption, a 30% reduction in greenhouse gas emissions, a 41% reduction in blue water consumption, and a 93% reduction in solid waste generation. Selecting reusable garment systems may result in significant environmental benefits compared to selecting disposable garment systems. By selecting reusable isolation gowns, healthcare facilities can add these quantitative benefits directly to their sustainability scorecards. Copyright © 2018 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

The steam laboratory of the Institut de Médecine Navale du Service de Santé des Armées: a set of tools in the service of the French Navy.

PubMed

Desruelle, Anne-Virginie; Schmid, Bruno

2004-09-01

Accidental exposure to hot water steam is a potential risk in the French Navy, and particularly on nuclear submarines or ships. Direct human exposure to this extreme environment during an accident leads to death in a short time. In order to protect the crew members of the French Navy, a laboratory was created at the Institut de Médecine Navale du Service de Santé des Armées (IMNSSA). A set of tools was developed to study the effects of exposure to hot water steam atmospheres on human physiology and on the protective capacities of textile fabrics and equipment. A testing device allows the quantification of the protective capacities of fabrics under steam stresses. A thermal manikin and a steam climatic chamber allow the evaluation of the protective capacities of equipment. The tests on fabrics and on garments were in good agreement. Water vapour impermeable fabrics and garments provide greater protection in steamy conditions. Moreover, the thicker the sample or garment, the higher the protection it gives. Care should be taken to verify that fabrics keep their thermal characteristics under steam stress. These characteristics, measured under standard comfortable conditions, are not always indicative of the protective abilities of the fabrics under steamy conditions.

Are compression garments effective for the recovery of exercise-induced muscle damage? A systematic review with meta-analysis.

PubMed

Marqués-Jiménez, Diego; Calleja-González, Julio; Arratibel, Iñaki; Delextrat, Anne; Terrados, Nicolás

2016-01-01

The aim was to identify benefits of compression garments used for recovery of exercised-induced muscle damage. Computer-based literature research was performed in September 2015 using four online databases: Medline (PubMed), Cochrane, WOS (Web Of Science) and Scopus. The analysis of risk of bias was completed in accordance with the Cochrane Collaboration Guidelines. Mean differences and 95% confidence intervals were calculated with Hedges' g for continuous outcomes. A random effect meta-analysis model was used. Systematic differences (heterogeneity) were assessed with I(2) statistic. Most results obtained had high heterogeneity, thus their interpretation should be careful. Our findings showed that creatine kinase (standard mean difference=-0.02, 9 studies) was unaffected when using compression garments for recovery purposes. In contrast, blood lactate concentration was increased (standard mean difference=0.98, 5 studies). Applying compression reduced lactate dehydrogenase (standard mean difference=-0.52, 2 studies), muscle swelling (standard mean difference=-0.73, 5 studies) and perceptual measurements (standard mean difference=-0.43, 15 studies). Analyses of power (standard mean difference=1.63, 5 studies) and strength (standard mean difference=1.18, 8 studies) indicate faster recovery of muscle function after exercise. These results suggest that the application of compression clothing may aid in the recovery of exercise induced muscle damage, although the findings need corroboration. Copyright © 2015 Elsevier Inc. All rights reserved.

Problems of equipment creation for hygienic treatment of textiles (underwear, garments, hygienic towels and napkins) for long-term space missions

NASA Astrophysics Data System (ADS)

Shumilina, I.

Impossibility of just in time stocks delivery to the International Space Station ISS because of Shuttle space flights absence has led to forced changing of standards of underwear garments and personal hygiene means using Therefore hygienic treatment of textiles underwear garments towels and napkins are necessary for long-term space flight missions Investigations into the ways of cosmonauts sanitary -- hygienic supply are prepared The resent equipment means and methods of cosmonauts sanitary -- hygienic supply were created for space flight conditions with an opportunity of stocks updating This investigations are confirm necessity of new generation system creation for cosmonauts sanitary -- hygienic supply and special designing of hygienic treatment laundry drying equipment and technologies for long-term space flights without an opportunity of stocks updating in particular for martian mission One from main requirements for equipment means and methods of cosmonauts sanitary -- hygienic supply is full safety for human organisms under systematic and long-term application in space flight conditions small energy consumption and combining with space Life-Support Systems Method and program of experimental investigations of textiles laundry with application of washing means for long-term space flight conditions are prepared It is necessary to estimate opportunity and efficiency of washing means application for textiles laundry for space flight missions also to estimate compatibility of washing means for textiles laundry and for washing

Post-exercise cooling techniques in hot, humid conditions.

PubMed

Barwood, Martin James; Davey, Sarah; House, James R; Tipton, Michael J

2009-11-01

Major sporting events are often held in hot and humid environmental conditions. Cooling techniques have been used to reduce the risk of heat illness following exercise. This study compared the efficacy of five cooling techniques, hand immersion (HI), whole body fanning (WBF), an air cooled garment (ACG), a liquid cooled garment (LCG) and a phase change garment (PCG), against a natural cooling control condition (CON) over two periods between and following exercise bouts in 31 degrees C, 70%RH air. Nine males [age 22 (3) years; height 1.80 (0.04) m; mass 69.80 (7.10) kg] exercised on a treadmill at a maximal sustainable work intensity until rectal temperature (T (re)) reached 38.5 degrees C following which they underwent a resting recovery (0-15 min; COOL 1). They then recommenced exercise until T (re) again reached 38.5 degrees C and then undertook 30 min of cooling with (0-15 min; COOL 2A), and without face fanning (15-30 min; COOL 2B). Based on mean body temperature changes (COOL 1), WBF was most effective in extracting heat: CON 99 W; WBF: 235 W; PCG: 141 W; HI: 162 W; ACG: 101 W; LCG: 49 W) as a consequence of evaporating more sweat. Therefore, WBF represents a cheap and practical means of post-exercise cooling in hot, humid conditions in a sporting setting.

Congenital Vascular Malformation

MedlinePlus

... also be effective for small, localized birthmarks (port wine stains). Patients with a rare venous malformation (Kleppel–Trenaunay Syndrome) of the limbs, frequently benefit from elastic garments and bandages used for com- ...

49 CFR 234.5 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... a vest, shirt, or jacket of a color appropriate for daytime flagging such as orange, yellow, strong.... For nighttime flagging, similar outside garments shall be retro reflective. Acceptable hand signal...

Gearing Up for the Big Game...and More

NASA Technical Reports Server (NTRS)

2004-01-01

Bill Elkins, a member of the U.S. Space Foundation's Space Technology Hall of Fame, is using his experience in developing cooling garments for use in sports and medicine. His company, CoolSystems, has developed the Game Ready[TM] Accelerated Recovery System. Game Ready[TM] ergonomic wraps are designed to custom fit the ankle, knee, back, torso, shoulder, elbow, and wrist and provide deep tissue cooling therapy with intermittent compression to reduce pain, swelling, and tissue damage. Recharge[TM] cooling garments have been developed to lower core body temperature in people with heat-sensitive multiple sclerosis, reducing symptoms such as fatigue, decreased balance, impaired vision, and decreased endurance. The company currently is collaborating with Stanford University Medical Center's Stanford Stroke Center to investigate the effectiveness of discrete hypothermia in stroke and head trauma patients.

Induced venous pooling and cardiorespiratory responses to exercise after bed rest

NASA Technical Reports Server (NTRS)

Convertino, V. A.; Sandler, H.; Webb, P.; Annis, J. F.

1982-01-01

Venous pooling induced by a specially constructed garment is investigated as a possible means for reversing the reduction in maximal oxygen uptake regularly observed following bed rest. Experiments involved a 15-day period of bed rest during which four healthy male subjects, while remaining recumbent in bed, received daily 210-min venous pooling treatments from a reverse gradient garment supplying counterpressure to the torso. Results of exercise testing indicate that while maximal oxygen uptake endurance time and plasma volume were reduced and maximal heart rate increased after bed rest in the control group, those parameters remained essentially unchanged for the group undergoing venous pooling treatment. Results demonstrate the importance of fluid shifts and venous pooling within the cardiovascular system in addition to physical activity to the maintenance of cardiovascular conditioning.

Protective clothing for pesticide operators: part II--data analysis of fabric characteristics.

PubMed

Shaw, Anugrah; Schiffelbein, Paul

2016-01-01

Development of objective measurements is an important requirement for establishing performance-based standards for protective clothing used while handling pesticide. This study, the second in a two-part series, reports on the work completed to evaluate the performance of approximately 100 fabrics that are either used or have the potential to be used for garments worn by operators while applying pesticides. Part I, published separately, provides an overview of these issues and describes research undertaken to select a test chemical for use in subsequent studies. The goals of this study were first to develop a comprehensive approach to evaluate the performance of garments currently being used by pesticide operators, and second, to use the laboratory and field data in the development of performance specifications.

Work stress: its components and its association with self-reported health outcomes in a garment factory in Bangladesh-Findings from a cross-sectional study.

PubMed

Steinisch, Maria; Yusuf, Rita; Li, Jian; Rahman, Omar; Ashraf, Hasan M; Strümpell, Christian; Fischer, Joachim E; Loerbroks, Adrian

2013-11-01

Bangladesh is one of the leading exporters of ready-made garments (RMG) worldwide producing at very low cost almost exclusively for Western markets. Empirical evidence on psychologically adverse working conditions and their association with health in the RMG setting remains sparse. Drawing on insights from previous ethnographic research, we conducted a cross-sectional epidemiological study among 332 RMG workers in Dhaka, Bangladesh. High work-related demands and poor interpersonal resources represented key components of work stress and were important determinants of poor health. The key work stress components observed in this study partly differed from those identified in Western work place settings. © 2013 The Authors. Published by Elsevier Ltd. All rights reserved.

An Overt Chemical Protective Garment Reduces Thermal Strain Compared with a Covert Garment in Warm-Wet but Not Hot-Dry Environments.

PubMed

Maley, Matthew J; Costello, Joseph T; Borg, David N; Bach, Aaron J E; Hunt, Andrew P; Stewart, Ian B

2017-01-01

Objectives: A commercial chemical, biological, radiological and nuclear (CBRN) protective covert garment has recently been developed with the aim of reducing thermal strain. A covert CBRN protective layer can be worn under other clothing, with equipment added for full chemical protection when needed. However, it is unknown whether the covert garment offers any alleviation to thermal strain during work compared with a traditional overt ensemble. Therefore, the aim of this study was to compare thermal strain and work tolerance times during work in an overt and covert ensemble offering the same level of CBRN protection. Methods : Eleven male participants wore an overt (OVERT) or covert (COVERT) CBRN ensemble and walked (4 km·h -1 , 1% grade) for a maximum of 120 min in either a wet bulb globe temperature [WBGT] of 21, 30, or 37°C (Neutral, WarmWet and HotDry, respectively). The trials were ceased if the participants' gastrointestinal temperature reached 39°C, heart rate reached 90% of maximum, walking time reached 120 min or due to self-termination. Results: All participants completed 120 min of walking in Neutral. Work tolerance time was greater in OVERT compared with COVERT in WarmWet ( P < 0.001, 116.5[9.9] vs. 88.9[12.2] min, respectively), though this order was reversed in HotDry ( P = 0.003, 37.3[5.3] vs. 48.4[4.6] min, respectively). The rate of change in mean body temperature and mean skin temperature was greater in COVERT (0.025[0.004] and 0.045[0.010]°C·min -1 , respectively) compared with OVERT (0.014[0.004] and 0.027[0.007]°C·min -1 , respectively) in WarmWet ( P < 0.001 and P = 0.028, respectively). However, the rate of change in mean body temperature and mean skin temperature was greater in OVERT (0.068[0.010] and 0.170[0.026]°C·min -1 , respectively) compared with COVERT (0.059[0.004] and 0.120[0.017]°C·min -1 , respectively) in HotDry ( P = 0.002 and P < 0.001, respectively). Thermal sensation, thermal comfort, and ratings of perceived exertion did not differ between garments at trial cessation ( P > 0.05). Conclusion: Those dressed in OVERT experienced lower thermal strain and longer work tolerance times compared with COVERT in a warm-wet environment. However, COVERT may be an optimal choice in a hot-dry environment. These findings have practical implications for those making decisions on the choice of CBRN ensemble to be used during work.

An Overt Chemical Protective Garment Reduces Thermal Strain Compared with a Covert Garment in Warm-Wet but Not Hot-Dry Environments

PubMed Central

Maley, Matthew J.; Costello, Joseph T.; Borg, David N.; Bach, Aaron J. E.; Hunt, Andrew P.; Stewart, Ian B.

2017-01-01

Objectives: A commercial chemical, biological, radiological and nuclear (CBRN) protective covert garment has recently been developed with the aim of reducing thermal strain. A covert CBRN protective layer can be worn under other clothing, with equipment added for full chemical protection when needed. However, it is unknown whether the covert garment offers any alleviation to thermal strain during work compared with a traditional overt ensemble. Therefore, the aim of this study was to compare thermal strain and work tolerance times during work in an overt and covert ensemble offering the same level of CBRN protection. Methods: Eleven male participants wore an overt (OVERT) or covert (COVERT) CBRN ensemble and walked (4 km·h−1, 1% grade) for a maximum of 120 min in either a wet bulb globe temperature [WBGT] of 21, 30, or 37°C (Neutral, WarmWet and HotDry, respectively). The trials were ceased if the participants' gastrointestinal temperature reached 39°C, heart rate reached 90% of maximum, walking time reached 120 min or due to self-termination. Results: All participants completed 120 min of walking in Neutral. Work tolerance time was greater in OVERT compared with COVERT in WarmWet (P < 0.001, 116.5[9.9] vs. 88.9[12.2] min, respectively), though this order was reversed in HotDry (P = 0.003, 37.3[5.3] vs. 48.4[4.6] min, respectively). The rate of change in mean body temperature and mean skin temperature was greater in COVERT (0.025[0.004] and 0.045[0.010]°C·min−1, respectively) compared with OVERT (0.014[0.004] and 0.027[0.007]°C·min−1, respectively) in WarmWet (P < 0.001 and P = 0.028, respectively). However, the rate of change in mean body temperature and mean skin temperature was greater in OVERT (0.068[0.010] and 0.170[0.026]°C·min−1, respectively) compared with COVERT (0.059[0.004] and 0.120[0.017]°C·min−1, respectively) in HotDry (P = 0.002 and P < 0.001, respectively). Thermal sensation, thermal comfort, and ratings of perceived exertion did not differ between garments at trial cessation (P > 0.05). Conclusion: Those dressed in OVERT experienced lower thermal strain and longer work tolerance times compared with COVERT in a warm-wet environment. However, COVERT may be an optimal choice in a hot-dry environment. These findings have practical implications for those making decisions on the choice of CBRN ensemble to be used during work. PMID:29170644

7 CFR 58.129 - Cleanliness.

Code of Federal Regulations, 2010 CFR

2010-01-01

... outer garments and caps (paper caps, hard hats, or hair nets acceptable) shall be worn to adequately protect the hair and beards when grown by all persons engaged in receiving, testing, processing milk...

7 CFR 58.129 - Cleanliness.

Code of Federal Regulations, 2014 CFR

2014-01-01

... outer garments and caps (paper caps, hard hats, or hair nets acceptable) shall be worn to adequately protect the hair and beards when grown by all persons engaged in receiving, testing, processing milk...

7 CFR 58.129 - Cleanliness.

Code of Federal Regulations, 2012 CFR

2012-01-01

... outer garments and caps (paper caps, hard hats, or hair nets acceptable) shall be worn to adequately protect the hair and beards when grown by all persons engaged in receiving, testing, processing milk...

7 CFR 58.129 - Cleanliness.

Code of Federal Regulations, 2013 CFR

2013-01-01

... outer garments and caps (paper caps, hard hats, or hair nets acceptable) shall be worn to adequately protect the hair and beards when grown by all persons engaged in receiving, testing, processing milk...

7 CFR 58.129 - Cleanliness.

Code of Federal Regulations, 2011 CFR

2011-01-01

... outer garments and caps (paper caps, hard hats, or hair nets acceptable) shall be worn to adequately protect the hair and beards when grown by all persons engaged in receiving, testing, processing milk...

Effect of Compression Garments on the Development of Delayed-Onset Muscle Soreness: A Multimodal Approach Using Contrast-Enhanced Ultrasound and Acoustic Radiation Force Impulse Elastography.

PubMed

Heiss, Rafael; Kellermann, Marion; Swoboda, Bernd; Grim, Casper; Lutter, Christoph; May, Matthias S; Wuest, Wolfgang; Uder, Michael; Nagel, Armin M; Hotfiel, Thilo

2018-06-12

Study Design Controlled laboratory study with repeated measures. Background Delayed-onset muscle soreness (DOMS) is one of the most common reasons for impaired muscle performance in sports. However, little consensus exists regarding which treatments may be most effective and the underlying mechanisms are poorly understood. Objectives To investigate the influence of compression garments on the development of DOMS, focusing on changes in muscle perfusion and muscle stiffness. Methods Muscle perfusion and stiffness, calf circumference, muscle soreness, passive ankle dorsiflexion, and creatine kinase levels were assessed on participants before (baseline) a DOMS-inducing eccentric calf exercise intervention and 60 h later (follow-up). After DOMS induction, a sports compression garment (18-21 mmHg) was worn on one randomized calf until follow-up. The contralateral calf served as an internal control. Muscle perfusion was assessed using contrast-enhanced ultrasound (peak enhancement [PE] and wash-in area under the curve [WiAUC]), while muscle stiffness was assessed using acoustic radiation force impulse (shear wave velocities [SWV]). An MRI scan of both lower legs was also performed during the follow-up testing session to characterize the extent of exercise-induced muscle damage. Comparisons were made between limbs and over time. Results SWV values of the medial gastrocnemius showed a significant interaction between time and limb (p=0.006) with the non-compressed muscle demonstrating lower muscle stiffness values at follow-up compared to baseline or the compressed muscle. No significant differences in soleus muscle stiffness were noted between limb or over time, as was the case for muscle perfusion metrics (PE and WiAUC) for the medial gastrocnemius and soleus muscles. Further, compression had no significant effect on passive ankle dorsiflexion, muscle soreness, calf circumference, or injury severity per MRI. Conclusion Continuous wearing of compression garments during the inflammation phase of DOMS may play an important role in regulating muscle stiffness; however, they have no significant effects on intramuscular perfusion or other common clinical assessments. J Orthop Sports Phys Ther, Epub 12 Jun 2018. doi:10.2519/jospt.2018.8038.

Physiological and Psychological Responses during Exercise and Recovery in a Cold Environment Is Gender-Related Rather Than Fabric-Related

PubMed Central

Cernych, Margarita; Baranauskiene, Neringa; Eimantas, Nerijus; Kamandulis, Sigitas; Daniuseviciute, Laura; Brazaitis, Marius

2017-01-01

We evaluated gender-specific effects of two types of undergarments on exercise-induced physiological and psychological stress and subsequent recovery in cold conditions for male and female participants. Ten healthy men and eleven healthy women (25.0 ± 1.5 versus 23.4 ± 1.2 years old, respectively) completed the experimental session twice with two different types of undergarments: polyester or merino wool leggings and long-sleeve tops; specifically, merino fabric had greater thermal resistance and water absorbency, and less water vapor as well as air permeability than polyester. Experimental sessions involved performing 1 h of exercise on a cycle ergometer at 8°C ambient temperature and 55% relative humidity, holding at 70–80 revolutions per minute and 60% of each participant’s predetermined maximal power output (assessed by maximal oxygen uptake test), followed by 1 h recovery in the same environment. Every 5 min during exercise and every 10 min during recovery, rectal temperature, heart rate, subjective ratings for thermal, shivering/sweating and clothing wetness sensations, and clothing next-to-skin and outer side surface temperature and humidity on the chest, back and thigh were recorded. All participants experienced high physiological stress (assessed by physiological strain index) during exercise. No significant gender differences were found in core temperature or heart rate changes during exercise, but women cooled down faster during recovery. Next-to-skin humidity was similar between genders and different garment sets during exercise and recovery, but such temperatures at the chest during exercise and at the thigh during exercise and recovery were lower in women with both sets of garments. Subjective thermal sensations were similar in all cases. In the last 20 min of cycling, women started to feel wetter than men (P < 0.05) for both garment sets. Shivering was reported as stronger in women in the last 10 min of recovery. Most of the changes in the garment microclimates during exercise and recovery in the cold were associated with gender-related differences rather than with fabric-related differences. PMID:28824518

Wearing lower-body compression garment with medium pressure impaired exercise-induced performance decrement during prolonged running

PubMed Central

Mizuno, Sahiro

2017-01-01

Objective To investigate the effect of wearing a lower body compression garment (CG) exerting different pressure levels during prolonged running on exercise-induced muscle damage and the inflammatory response. Methods Eight male participants completed three exercise trials in a random order. The exercise consisted of 120 min of uphill running at 60% of VO2max. The exercise trials included 1) wearing a lower-body CG with 30 mmHg pressure [HIGH]; 2) wearing a lower-body CG with 15 mmHg pressure [MED]; and 3) wearing a lower-body garment with < 5 mmHg pressure [CON]. Heart rate (HR), and rate of perceived exertion for respiration and legs were monitored continuously during exercise. Time-course change in jump height was evaluated before and immediately after exercise. Blood samples were collected to determine blood glucose, lactate, serum creatine kinase, myoglobin, free fatty acids, glycerol, cortisol, and plasma interleukin-6 (IL-6) concentrations before exercise, 60 min of the 120 min exercise period, immediately after exercise, and 60 min after exercise. Results Jump height was significantly higher immediately after the exercise in the MED trial compared with that in the HIGH trial (P = 0.04). Mean HR during the 120 min exercise was significantly lower in the MED trial (162 ± 4 bpm) than that in the CON trial (170 ± 4 bpm, P = 0.01). Plasma IL-6 concentrations increased significantly with exercise in all trials, but the area under the curve during exercise was significantly lower in the MED trial (397 ± 58 pg/ml·120 min) compared with that in the CON trial (670 ± 86 pg/ml·120 min, P = 0.04). Conclusion Wearing a lower body CG exerting medium pressure (approximately 15 mmHg) significantly attenuated decrease in jump performance than that with wearing a lower body CG exerting high pressure (approximately 30 mmHg). Furthermore, exercise-induced increases in HR and the inflammatory response were significantly smaller with CG exerted 15mmHg than that with garment exerted < 5 mmHg. PMID:28562650

Prevalence and risk factors of depression among garment workers in Bangladesh.

PubMed

Fitch, Taylor Jennelle; Moran, Jacxelyn; Villanueva, Gabriela; Sagiraju, Hari Krishna Raju; Quadir, Mohammad Morshedul; Alamgir, Hasanat

2017-05-01

Depression is a growing health issue in both developed and developing countries. General unawareness at the population level, lack of training among health care providers and scarcity of resources including treatment opportunities may conceal the real burden of depression in developing countries, and more epidemiological studies on its prevalence and risk factors are critically needed. This study reports the prevalence of depression and its associated risk factors among female garment factory workers in Bangladesh - a major supplier country of clothes for the Western market. This research should generate useful evidence for national and international stakeholders who have an interest in improving health, safety and well-being of outsourced factory workers. A survey was conducted on a sample of 600 lower socio-economic status working women including garment workers. This survey collected data on demographic and health profile of these workers. The primary outcome was depression as measured by Patient Health Questionnaire 9. It also obtained data on traumatic life events and post-traumatic stress disorder. The prevalence of depression was 23.5%: 20.9% among garment workers and 26.4% among others. Part-time employment (odds ratio-OR): 2.36, 95% confidence interval (95% CI): 1.01-5.51), chronic pain (OR: 1.67, 95% CI: 1.01-2.78), two or more traumatic life events (OR: 6.43, 95% CI: 2.85-14.55) and dysuria (OR: 2.50, 95% CI: 1.02-6.15) were found to be significantly associated with depression among these workers in multivariate regression model. Depression prevalene lowered by 11% among these workers for every additional monthly earning of 1,000 taka (US$12). Depression is a multifaceted health issue with many personal, social, economic and health determinants and consequences. This study demonstrates that the prevalence of moderate-to-severe depression among working women in Bangladesh is quite high. Prevention and treatment of depression in developing countries and societies can reduce suffering, lower incidence of suicide, and prevent economic loss. Creating awareness on outsourced workers' poor mental health may help in developing initiatives to protect and preserve their well-being.

Improvement in exercise capacity and delayed anaerobic metabolism induced by far-infrared-emitting garments in active healthy subjects: A pilot study.

PubMed

Mantegazza, Valentina; Contini, Mauro; Botti, Maurizia; Ferri, Ada; Dotti, Francesca; Berardi, Pierluigi; Agostoni, Piergiuseppe

2018-01-01

Background Far-infrared-emitting garments have several biological properties including the capability to increase blood perfusion in irradiated tissues. Design The aim of the study was to evaluate whether far-infrared radiation increases exercise capacity and delays anaerobic metabolism in healthy subjects. Methods With a double-blind, crossover protocol, a maximal cardiopulmonary exercise test was performed in 20 volunteers, wearing far-infrared or common sport clothes, identical in texture and colour. Results Comparing far-infrared with placebo garments, higher oxygen uptake at peak of exercise and longer endurance time were observed (peak oxygen uptake 38.0 ± 8.9 vs. 36.2 ± 8.5 ml/kg/min, endurance time 592 ± 85 vs. 570 ± 71 seconds; P < 0.01); the anaerobic threshold was significantly delayed (anaerobic threshold time 461 ± 93 vs. 417 ± 103 seconds) and anaerobic threshold oxygen uptake and anaerobic threshold oxygen pulse were significantly higher (25.3 ± 6.4 vs. 20.9 ± 5.4 ml/kg/min and 13.3 ± 3.8 vs. 12.4 ± 3.3 ml/beat, respectively). In 10 subjects the blood lactate concentration was measured every 2 minutes during exercise and at peak; lower values were observed with far-infrared fabrics compared to placebo from the eighth minute of exercise, reaching a significant difference at 10 minutes (3.6 ± 0.83 vs. 4.4 ± 0.96 mmol/l; P = 0.02). Conclusions In healthy subjects, exercising with a far-infrared outfit is associated with an improvement in exercise performance and a delay in anaerobic metabolism. In consideration of the acknowledged non-thermic properties of functionalised clothes, these effects could be mediated by an increase in oxygen peripheral delivery secondary to muscular vasodilation. These data suggest the need for testing far-infrared-emitting garments in patients with exercise limitation or in chronic cardiovascular and respiratory patients engaged in rehabilitation programmes.

75 FR 44794 - Rendezvous International v.

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-29

... partnership formed in the Country of Pakistan in the business of manufacturing garments. Complainant asserts... place between Pakistan and New York, USA via ocean vessels NYK Cosmos, Asir, and Fowairet, from April 24...

Liquid-Cooled Garment

NASA Technical Reports Server (NTRS)

1977-01-01

A liquid-cooled bra, offshoot of Apollo moon suit technology, aids the cancer-detection technique known as infrared thermography. Water flowing through tubes in the bra cools the skin surface to improve resolution of thermograph image.

9 CFR 354.243 - Operations and procedures.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) The floors in the eviscerating room shall be kept clean and reasonably dry during eviscerating... handling equipment shall wear clean garments and should wear caps or hair nets, and shall keep their hands...

Shoulder Joint For Protective Suit

NASA Technical Reports Server (NTRS)

Kosmo, Joseph J.; Smallcombe, Richard D.

1994-01-01

Shoulder joint allows full range of natural motion: wearer senses little or no resisting force or torque. Developed for space suit, joint offers advantages in protective garments for underwater work, firefighting, or cleanup of hazardous materials.

Thermal and mechanical properties of aluminized fabrics for use in ferrous metal handling operations.

PubMed

Wren, J E; Scott, W D; Bates, C E

1977-11-01

Protective garments are normally worn in molten handling operations to provide some protection against molten metal splashes. These garments are also intended to provide protection against radiant heat, and they should be as heat resistant and comfortable as possible. Asbestos-based fabrics have been employed for many years, but recently some concern has been expressed over possible asbestos exposure. This program was undertaken to explore the ability of several types of fabrics to resist heat transfer during molten metal impact. A molten metal splash test, along with standard methods for determining tensile strength, flame resistance, and abrasion-flexing resistance were used to evaluate several classes of protective fabrics. The results indicate that there are materials available that offer equal or better mechanical properties and thermal protection compared to aluminized asbestos.

Integration methods for thermosensitive gel systems in garments

NASA Astrophysics Data System (ADS)

Reich, A.; Rödel, H.; Stoll, A.; Liske, A.; Zehm, D.

2017-10-01

Humans live and work under severe thermophysiological conditions, which are characterized by extreme temperatures and humidities. Furthermore, additional burdens can arise from physical activities of the human body or the work conditions (resulting in psychological stress) [1]. The thermoregulation of the human body compensates such situations and maintains the core body temperature at 37°C (98,6 °F). The currently used systems for supporting human thermoregulation, such as PCM-equipped surface structures or mobile water-based cooling units have the disadvantage that the running cooling process is neither switchable nor reversible. Another promising possibility for a personal cooling is the use of temperature-dependent superabsorbers (so-called LCST and UCST) in garments, which absorb the human sweat and transmit it to the environment by evaporation. Cooling during evaporation results in heat transfer from the human body.

Wearable kinesthetic systems for capturing and classifying body posture and gesture.

PubMed

Tognetti, Alessandro; Lorussi, Federico; Tesconi, Mario; Bartalesi, Raphael; Zupone, Giuseppe; De Rossi, Danilo

2005-01-01

Monitoring body kinematics has fundamental relevance in several biological and technical disciplines. In particular the possibility to know the posture exactly may furnish a main aid in rehabilitation topics. This paper deals with the design, the development and the realization of sensing garments, from the characterization of innovative comfortable and spreadable sensors to the methodologies employed to gather information on posture and movement. In the present work an upper limb kinesthetic garment (ULKG), which allows to reconstruct shoulder, elbow and wrist movements and a kinesthetic glove able to detect posture an gesture of the hand are presented. Sensors are directly integrated in Lycra fabrics by using conductive elastomer (CE) sensors. CE sensors show piezoresistive properties when a deformation is applied and they can be integrated onto fabric or other flexible substrate to be employed as strain sensors.

Results of shuttle EMU thermal vacuum tests incorporating an infrared imaging camera data acquisition system

NASA Technical Reports Server (NTRS)

Anderson, James E.; Tepper, Edward H.; Trevino, Louis A.

1991-01-01

Manned tests in Chamber B at NASA JSC were conducted in May and June of 1990 to better quantify the Space Shuttle Extravehicular Mobility Unit's (EMU) thermal performance in the cold environmental extremes of space. Use of an infrared imaging camera with real-time video monitoring of the output significantly added to the scope, quality and interpretation of the test conduct and data acquisition. Results of this test program have been effective in the thermal certification of a new insulation configuration and the '5000 Series' glove. In addition, the acceptable thermal performance of flight garments with visually deteriorated insulation was successfully demonstrated, thereby saving significant inspection and garment replacement cost. This test program also established a new method for collecting data vital to improving crew thermal comfort in a cold environment.

Garment sizes in perception of body size.

PubMed

Fan, Jintu; Newton, Edward; Lau, Lilian; Liu, Fu

2003-06-01

This paper reports an experimental investigation of the effect of garment size on perceived body size. The perceived body sizes of three Chinese men (thin, medium, and obese build) wearing different sizes of white T-shirts were assessed using Thompson and Gray's 1995 Nine-figural Scale in 1 (thinnest) to 9 (obese) grade and a newly-proposed method. Within the limit of commercially available T-shirt sizes, for thin and medium persons, perceived body sizes are bigger when wearing T-shirts of larger sizes. For an obese person, however, wearing a large size T-shirt tends to make him look thinner. The study also showed that the newly proposed comparative method is more reliable in comparing body size perception but without measuring the magnitude of the change in body-size grade. The figural scale and the comparative method can be complementary.

Analysis of measured data of human body based on error correcting frequency

NASA Astrophysics Data System (ADS)

Jin, Aiyan; Peipei, Gao; Shang, Xiaomei

2014-04-01

Anthropometry is to measure all parts of human body surface, and the measured data is the basis of analysis and study of the human body, establishment and modification of garment size and formulation and implementation of online clothing store. In this paper, several groups of the measured data are gained, and analysis of data error is gotten by analyzing the error frequency and using analysis of variance method in mathematical statistics method. Determination of the measured data accuracy and the difficulty of measured parts of human body, further studies of the causes of data errors, and summarization of the key points to minimize errors possibly are also mentioned in the paper. This paper analyses the measured data based on error frequency, and in a way , it provides certain reference elements to promote the garment industry development.

Attempts to control clothes-borne infection in a burn unit, 2. Clothing routines in clinical use and the epidemiology of cross-colonization.

PubMed Central

Ransjö, U.

1979-01-01

Previous investigations have shown that cross-contamination in a burn unit is mainly clothes-borne. New barrier garments have been designed and tried experimentally. The aim of the present study was to investigate the effects of different clothing routines on cross-contamination. In a long-term study, the rates and routes of colonizations with Staphylococcus aureus, Streptococcus groups A, B, C, F, and G and Pseudomonas aeruginosa were examined. The exogenous colonization rates were, with S. aureus 77%, with Streptococcus species 52% and with Ps. aeruginosa 32%. The colonization rate with Ps. aeruginosa was higher in patients with larger burns. Patients dispersed Streptococcus and Ps. aeruginosa as well as S. aureus into the air of their rooms in considerable amounts, but dispersers were not more important as sources of cross-colonization than non-dispersers. In comparison of clothing routines, there was no difference in overall colonization rates. The newly designed barrier garment that was made from apparently particle-tight material did not reduce the transfer of bacteria from patient to patient. A less rigid routine than that previously used did not increase the risk of cross-contamination. A thorough change of barrier dress after close contact nursing delayed the first exogenous S. aureus colonization from day 6 to day 14 after admission. This routine might be recommended for clinical use. Otherwise, methods must be developed for adequate selection of materials intended for barrier garments. Images Plate 1 PMID:109498

Extravehicular Mobility Unit Penetration Probability from Micrometeoroids and Orbital Debris: Revised Analytical Model and Potential Space Suit Improvements

NASA Technical Reports Server (NTRS)

Chase, Thomas D.; Splawn, Keith; Christiansen, Eric L.

2007-01-01

The NASA Extravehicular Mobility Unit (EMU) micrometeoroid and orbital debris protection ability has recently been assessed against an updated, higher threat space environment model. The new environment was analyzed in conjunction with a revised EMU solid model using a NASA computer code. Results showed that the EMU exceeds the required mathematical Probability of having No Penetrations (PNP) of any suit pressure bladder over the remaining life of the program (2,700 projected hours of 2 person spacewalks). The success probability was calculated to be 0.94, versus a requirement of >0.91, for the current spacesuit s outer protective garment. In parallel to the probability assessment, potential improvements to the current spacesuit s outer protective garment were built and impact tested. A NASA light gas gun was used to launch projectiles at test items, at speeds of approximately 7 km per second. Test results showed that substantial garment improvements could be made, with mild material enhancements and moderate assembly development. The spacesuit s PNP would improve marginally with the tested enhancements, if they were available for immediate incorporation. This paper discusses the results of the model assessment process and test program. These findings add confidence to the continued use of the existing NASA EMU during International Space Station (ISS) assembly and Shuttle Operations. They provide a viable avenue for improved hypervelocity impact protection for the EMU, or for future space suits.

Vitamin D deficiency and low bone status in adult female garment factory workers in Bangladesh.

PubMed

Islam, Md Zahirul; Shamim, Abu Ahmed; Kemi, Virpi; Nevanlinna, Antti; Akhtaruzzaman, Mohammad; Laaksonen, Marika; Jehan, Atia H; Jahan, Khurshid; Khan, Habib Ullah; Lamberg-Allardt, Christel

2008-06-01

The manufacture of garments is the main industry in Bangladesh and employs 1.6 million female workers. Due to the indoor lifestyle and low dietary intake of calcium, we hypothesised that they are at risk of low vitamin D and bone mineral status. Two hundred female garment workers (aged 18-36 years) were randomly selected. Serum 25-hydroxyvitamin D (S-25OHD), serum intact parathyroid hormone (S-iPTH), serum calcium (S-Ca), serum phosphate (S-P) concentration and serum alkaline phosphatase activity (S-ALP) were measured from fasting samples. Bone indexes of hip and spine were measured by dual-energy X-ray absorptiometry. The mean S-25OHD (36.7 nmol/l) was low compared to that recommended for vitamin D sufficiency. About 16% of the subjects were found to be vitamin D-deficient (S-25OHD 21 ng/l) was associated with progressive reduction in bone mineral density at the femoral neck and lumbar spine. According to the WHO criteria, the mean T-score of the femoral neck and lumbar spine of the subjects were within osteopenic range. We observed that subjects with a bone mineral density T-score < -2.5 had a trend of lower values of BMI, waist-hip circumference, mid-upper-arm circumference, S-25OHD and higher S-iPTH and S-ALP. The high prevalence of hypovitaminosis D and low bone mineral density among these subjects are indicative of higher risk for osteomalacia or osteoporosis and fracture.

Defined UV protection by apparel textiles.

PubMed

Hoffmann, K; Laperre, J; Avermaete, A; Altmeyer, P; Gambichler, T

2001-08-01

This article was written to update information on test methods and standards for determining the UV protection of apparel textiles and on factors affecting UV protective properties of fabrics, from dermatological and textile technological viewpoints. Articles from dermatological and textile technological journals published from 1990 to 2001 were identified from MEDLINE, Excerpta Medica/EMBASE, World Textiles, and Textile Technology Digest. Peer-reviewed dermatological articles, textile technological research articles, and normative publications were selected. Independent data extraction was performed by several observers. Spectrophotometry is the preferred method for determining UV protection factor of textile materials. Various textile qualities affect the UV protection factor of a finished garment; important elements are the fabric porosity, type, color, weight, and thickness. The application of UV absorbers in the yarns significantly improves the UV protection factor of a garment. With wear and use, several factors can alter the UV protective properties of a textile, including stretch, wetness, and degradation due to laundering. Standards in the field exist in Australia and Great Britain, and organizations such as the European Standardization Commission in Europe and the American Association of Textile Chemists and Colorists and the American Society for Testing and Materials in the United States are also establishing standards for the determination and labeling of sun protective clothing. Various textile qualities and conditions of wear and use affect UV protective properties of apparel textiles. The use of UV blocking fabrics can provide excellent protection against the hazards of sunlight; this is especially true for garments manufactured as UV protective clothing.

76 FR 66895 - Steel Wire Garment Hangers From the People's Republic of China: Affirmative Final Determination...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-28

... Countervailing Duty Orders on Certain Pasta From Italy: Affirmative Preliminary Determinations of Circumvention... Anti-Circumvention Inquiry of the Antidumping and Countervailing Duty Orders on Certain Pasta from...

Cooling vest

NASA Technical Reports Server (NTRS)

Kosmo, J.; Kane, J.; Coverdale, J.

1977-01-01

Inexpensive vest of heat-sealable urethane material, when strapped to person's body, presents significant uncomplicated cooling system for environments where heavy accumulation of metabolic heat exists. Garment is applicable to occupations where physical exertion is required under heavy protective clothing.

Nonflammable Clothing Development Program

NASA Technical Reports Server (NTRS)

Johnston, Richard; Radnofsky, Matthew I.

1968-01-01

Protective clothing is of major importance in our space program. The authors discuss the requirements, selection, and testing of materials considered for use in the program. The various types of garments worn by astronauts and support personnel are briefly described.

Synthesis of nano silver on cellulosic denim fabric producing yellow colored garment with antibacterial properties.

PubMed

Maryan, Ali Sadeghian; Montazer, Majid; Harifi, Tina

2015-01-22

In this study, an aged-look denim fabric with antibacterial property was prepared in one single step process. For this purpose, the simultaneous antibacterial finishing and discoloration of denim fabric was carried out through reduction of indigo dye and silver nitrate by glucose in alkaline media using a conventional garment washing machine. The uniform distribution of silver nanoparticles on the fiber surface was confirmed by scanning electron microscope and energy dispersive X-ray spectroscopy. The treated fabrics were also characterized by X-ray diffraction (XRD) and Raman spectroscopy. Due to the color changes during the process, the color coordinates of the treated samples were also measured. Findings suggest the potential of the proposed method in producing old-look denim fabric with desirable yellow appearance and reasonable antibacterial activity against Staphylococcus aureus and Escherichia coli with low toxicity for human. Copyright © 2014 Elsevier Ltd. All rights reserved.

Protective supplied breathing air garment

DOEpatents

Childers, Edward L.; von Hortenau, Erik F.

1984-07-10

A breathing air garment for isolating a wearer from hostile environments containing toxins or irritants includes a suit and a separate head protective enclosure or hood engaging a suit collar in sealing attachment. The hood and suit collar are cylindrically shaped and dimensioned to enable the wearer to withdraw his hands from the suit sleeves to perform manual tasks within the hood interior. Breathing air is supplied from an external air line with an air delivery hose attached to the hood interior. The hose feeds air into an annular halo-like fiber-filled plenum having spaced discharge orifices attached to the hood top wall. A plurality of air exhaust/check valves located at the suit extremities cooperate with the hood air delivery system to provide a cooling flow of circulating air from the hood throughout the suit interior. A suit entry seal provided on the suit rear torso panel permits access into the suit and is sealed with an adhesive sealing flap.

Local effect of compression stockings on skin microcirculatory activity through the measurement of skin effective thermal conductivity.

PubMed

Grenier, Etienne; Gehin, Claudine; Lun, Bertrand; McAdams, Eric

2013-01-01

This paper presents a preliminary study to demonstrate the instantaneous local effect of compression stocking (Class 2) on skin microcirculatory activity. The measurement needs to be carefully performed as the sensor is placed under the garment. To assess the local effect of compression stockings, we use the ambulatory device Hematron located on the calf under the garment. Skin microcirculatory activity is assessed through the skin's effective thermal conductivity measurement. A specific housing for the sensor has been designed to avoid excessive pressure induced by the sensor when squeezed by stockings. The experiment, conducted on ten healthy subjects, comprised two stages: without and with compression stockings. Skin effective thermal conductivity was recorded at three successive positions (supine, sitting and standing). Significant improvement in skin microcirculatory activity was recorded by the Hematron device for the three positions. We have also demonstrated that Hematron sensor can be used under compression stockings.

Sensory evaluation based fuzzy AHP approach for material selection in customized garment design and development process

NASA Astrophysics Data System (ADS)

Hong, Y.; Curteza, A.; Zeng, X.; Bruniaux, P.; Chen, Y.

2016-06-01

Material selection is the most difficult section in the customized garment product design and development process. This study aims to create a hierarchical framework for material selection. The analytic hierarchy process and fuzzy sets theories have been applied to mindshare the diverse requirements from the customer and inherent interaction/interdependencies among these requirements. Sensory evaluation ensures a quick and effective selection without complex laboratory test such as KES and FAST, using the professional knowledge of the designers. A real empirical application for the physically disabled people is carried out to demonstrate the proposed method. Both the theoretical and practical background of this paper have indicated the fuzzy analytical network process can capture expert's knowledge existing in the form of incomplete, ambiguous and vague information for the mutual influence on attribute and criteria of the material selection.

Silk industry and carbon footprint mitigation

NASA Astrophysics Data System (ADS)

Giacomin, A. M.; Garcia, J. B., Jr.; Zonatti, W. F.; Silva-Santos, M. C.; Laktim, M. C.; Baruque-Ramos, J.

2017-10-01

Currently there is a concern with issues related to sustainability and more conscious consumption habits. The carbon footprint measures the total amount of greenhouse gas (GHG) emissions produced directly and indirectly by human activities and is usually expressed in tonnes of carbon dioxide (CO2) equivalents. The present study takes into account data collected in scientific literature regarding the carbon footprint, garments produced with silk fiber and the role of mulberry as a CO2 mitigation tool. There is an indication of a positive correlation between silk garments and carbon footprint mitigation when computed the cultivation of mulberry trees in this calculation. A field of them mitigates CO2 equivalents in a proportion of 735 times the weight of the produced silk fiber by the mulberry cultivated area. At the same time, additional researches are needed in order to identify and evaluate methods to advertise this positive correlation in order to contribute to a more sustainable fashion industry.

Wearable photoplethysmography device prototype for wireless cardiovascular monitoring

NASA Astrophysics Data System (ADS)

Kviesis-Kipge, E.; Grabovskis, A.; Marcinkevics, Z.; Mecnika, V.; Rubenis, O.

2014-05-01

The aim of the study was to develop a prototype system of the smart garment for real time telemetric monitoring of human cardiovascular activity. Two types of photoplethysmography (PPG) sensors for low noise and artefact free signal recording from various sites of the human body that were suitable for integration into smart textile were investigated. The reflectance sensors with single and multiple photodiodes based on "pulse-duration-based signal conversion" signal acquisition principle were designed and evaluated. The technical parameters of the system were measured both on bench and in vivo. Overall, both types of PPG sensors showed acceptable signal quality SNR 86.56±3.00 dB, dynamic range 89.84 dB. However, in-vivo condition tests revealed lower noise and higher accuracy achieved by applying the multiple photodiodes sensor. We concluded that the proposed PPG device prototype is simple and reliable, and therefore, can be utilized in low-cost smart garments.

Combining 3D printed forms with textile structures - mechanical and geometrical properties of multi-material systems

NASA Astrophysics Data System (ADS)

Sabantina, L.; Kinzel, F.; Ehrmann, A.; Finsterbusch, K.

2015-07-01

The 3D printing belongs to the rapidly emerging technologies which have the chance to revolutionize the way products are created. In the textile industry, several designers have already presented creations of shoes, dresses or other garments which could not be produced with common techniques. 3D printing, however, is still far away from being a usual process in textile and clothing production. The main challenge results from the insufficient mechanical properties, especially the low tensile strength, of pure 3D printed products, prohibiting them from replacing common technologies such as weaving or knitting. Thus, one way to the application of 3D printed forms in garments is combining them with textile fabrics, the latter ensuring the necessary tensile strength. This article reports about different approaches to combine 3D printed polymers with different textile materials and fabrics, showing chances and limits of this technique.

Workplace safety in Bangladesh ready-made garment sector: 3 years after the Rana Plaza collapse.

PubMed

Barua, Uttama; Ansary, Mehedi Ahmed

2017-12-01

Workplace safety is one of the most important issues in industries worldwide, and is endangered by industrial accidents. Different industrial disasters have resulted in several initiatives worldwide to protect human life and reduce material damage, both nationally and internationally. In Bangladesh, the ready-made garment (RMG) industry is one of the most important export-oriented business sectors, which is facing challenges to ensure workplace safety. The Rana Plaza collapse in Bangladesh is the consequence of such non-compliance. The accident resulted in different local and global initiatives to address the challenges. This article reviews progress and achievement of the initiatives to reduce vulnerability in the Bangladesh RMG industry within 3 years after the deadly accident. In the long run, the challenge is to maintain momentum already created for achieving sustainability in the RMG sector in Bangladesh and maintaining compliance even after the end of support from external partners.

Phase II Testing of Liquid Cooling Garments Using a Sweating Manikin, Controlled by a Human Physiological Model

NASA Technical Reports Server (NTRS)

Paul, Heather; Trevino, Luis; Bue,Grant; Rugh, John

2006-01-01

An Advanced Automotive Manikin (ADAM) developed at the National Renewable Energy Laboratory (NREL) is used to evaluate NASA's liquid cooling garments (LCGs) used in advanced space suits for extravehicular applications. The manikin has 120 separate heated/sweating zones and is controlled by a finite element physiological model of the human thermoregulatory system. Previous testing showed the thermal sensation and comfort followed the expected trends as the LCG inlet fluid temperature was changed. The Phase II test data demonstrates the repeatability of ADAM by retesting the baseline LCG. Skin and core temperature predictions using ADAM in an LCG/Arctic suit combination are compared to NASA physiological data to validate the manikin/model. Additional LCG configurations are assessed using the manikin and compared to the baseline LCG. Results can extend to other personal protective clothing, including HAZMAT suits, nuclear/biological/chemical protective suits, and fire protection suits.

What was uniform about the fin-de-siècle sailor suit?

PubMed

Rose, Clare

2011-01-01

The sailor suits widely worn by children in late-nineteenth-century Britain have been interpreted at the time, and since, as expressions of an Imperial ethos. Yet, a closer examination of the ways that these garments were produced by mass manufacturers, mediated by advertisers and fashion advisors and consumed by families makes us question this characterization. Manufacturers interpreted sailor suits not as unchanging uniforms but as fashion items responding to seasonal changes. Consumers used them to assert social identities and social distinctions, selecting from the multiple variants available. Cultural commentators described sailor suits as emulating Royal practice—but also as ‘common’ and to be avoided. A close analysis of large samples of images and texts from the period 1870–1900 reveals how these different meanings overlapped, making the fin-de-siècle sailor suit a garment that undermines many of our assumptions.

Physiological Strain in French Vineyard Workers Wearing Protective Equipment to Conduct Re-Entry Tasks in Humid Conditions.

PubMed

Grimbuhler, Sonia; Viel, Jean-François

2018-06-19

The proper use of personal protective equipment (PPE) plays an important role in reducing exposure to pesticides in vineyard farming activities, including re-entry tasks. However, discomfort from clothing systems may increase the physiological burden on workers. We compared the physiological burdens of vineyard workers wearing three different types of PPE during canopy management in field humid conditions while accounting for occupational, climatic, and geographical environments. The study was conducted in the Bordeaux vineyards of southern France during June 2012. A total of 42 workers from seven vineyards consented to field observations. The following PPE garments were randomly allocated: HF Estufa polyamide (Brisa®), Tyvek® Classic Plus, and Tychem® C Standard. Participant sociodemographic characteristics were collected using a structured questionnaire. Skin temperature and heart rate were monitored continuously using portable devices. Multivariate multilevel linear regression models were performed to account for the hierarchical structure of data. No significant difference was found for mean skin temperature during work. Regardless of the cardiac strain parameter considered, the Tyvek® Classic Plus garment produced the poorest results (P ≤ 0.03). Under the very humid conditions encountered during the field study, the thinness and breathability of the Tyvek® Classic Plus garment resulted in undergarment humidity, imposing additional physiological burden on vineyard workers. These results confirm that the idea of using generic coveralls in any farming activity is unsuitable. Compromises should be created between physiological costs and protection, depending on the agricultural task performed, the crop grown, and the environmental conditions encountered.

Non-Venting Thermal and Humidity Control for EVA Suits

NASA Technical Reports Server (NTRS)

Izenson, Mike; Chen, Weibo; Bue, Grant

2011-01-01

Future EVA suits need processes and systems to control internal temperature and humidity without venting water to the environment. This paper describes an absorption-based cooling and dehumidification system as well as laboratory demonstrations of the key processes. There are two main components in the system: an evaporation cooling and dehumidification garment (ECDG) that removes both sensible heat and latent heat from the pressure garment, and an absorber radiator that absorbs moisture and rejects heat to space by thermal radiation. This paper discusses the overall design of both components, and presents recent data demonstrating their operation. We developed a design and fabrication approach to produce prototypical heat/water absorbing elements for the ECDG, and demonstrated by test that these elements could absorb heat and moisture at a high flux. Proof-of-concept tests showed that an ECDG prototype absorbs heat and moisture at a rate of 85 W/ft under conditions that simulate operation in an EVA suit. The heat absorption was primarily due to direct absorption of water vapor. It is possible to construct large, flexible, durable cooling patches that can be incorporated into a cooling garment with this system. The proof-of-concept test data was scaled to calculate area needed for full metabolic loads, thus showing that it is feasible to use this technology in an EVA suit. Full-scale, lightweight absorber/radiator modules have also been built and tested. They can reject heat at a flux of 33 W/ft while maintaining ECDG operation at conditions that will provide a cool and dry environment inside the EVA suit.

Occupational health of self-employed women workers. Experiences from community based studies of the Self-Employed Women's Association (SEWA).

PubMed

Chatterjee, M

1993-02-01

The Self-Employed Workers' Association (SEWA) has conducted 4 longitudinal, community-based studies to survey the occupational health of self-employed women in Ahmedabad and Indore, India. It included the workers in all stages of research. SEWA staff examined women in readymade garment, bidi, agarbatti, and masala fields. Since SEWA did not use control groups, they could not establish cause and effect relationships. Masala workers had the highest illiteracy rate (66%). At least 50% of all workers (89% of readymade garment workers) worked 8-12 hours/day. Daily wages of most workers did not exceed Rs.10, confirming their low poverty level. The most common occupational health problem while working was pain in the limbs for bidi (63%) and readymade garment workers (80%). They also experienced back pain and headaches. After work, back pain was common among agarbatti (73%) and masala (39%) workers. Masala workers also suffered from blisters and calluses (51%) and burning sensation (45%), particularly in their hands. Gynecological problems (e.g., early periods, white discharge, and burning sensation while urinating) and abdominal pain were common in all 4 groups. These results demonstrated a need for further research on occupational health and gynecological diseases; health facilities to adjust services to meet self-employed workers needs; provision of safe and subsidized tools, safety equipment, benefits (e.g., sick leave and child care), and health insurance; and health education. SEWA recommends that self-employed workers receive identity cards, the government enforce minimum wage laws and regulate working hours, and workers are provided basic amenities (e.g., potable water and sanitation).

Effects of hair, clothing, and headgear on localization of three-dimensional sounds Part IIb

NASA Astrophysics Data System (ADS)

Riederer, Klaus A. J.

2003-10-01

Seven 20-25-year-old normal hearing (<=20 dBHL) native male-undergraduates listened twice to treatments of 85 virtual source locations in a large dark anechoic chamber. The 3-D-stimuli were anew-calculated white noise bursts, amplitude modulated (40-Hz sine), repeated after a pause (total duration 3×275=825 ms), HRTF-convolved and headphone-equalized (Sennheiser HD580). The HRTFs were measured from a Cortex dummy head wearing different garments: 1=alpaca pullover only; 2=1+curly pony-tailed thick-hair+eye-glasses 3=1+long thin-hair (ear-covering) 4=1+mens trilby; 5=2+bicycle helmet+jacket [Riederer, J. Acoust. Soc. Am., this issue]. Perceived directions were signified by placing a tailored digitizer-stylus over an illuminated ball darkened after the response. Subjects did the experiments during three days, each consisting of a 2-h session of several randomized sets with multiple breaks. Azimuth and elevation errors were investigated separately in factorial within-subjects ANOVA showing strong dependence p(<=0.004) on all main effects and interactions (garment, elevation, azimuth). The grand mean errors were approximately 16°-19°. Confused angles were retained around the +/-90°-interaural axis and cos(elev)-weighting was applied to azimuth errors. The total front-back/back-front confusion rate was 18.38% and up-down/down-up 12.21%. The confusions (except left-right/right-left, 2.07%) and reaction times depended strongly on azimuth (main effect) and garment (interaction). [Work supported by Graduate School of Electronics, Telecommunication and Automation.

Do Ergogenic Aids Alter Lower Extremity Joint Alignment During a Functional Movement Lunge Prior to and Following an Exercise Bout?

PubMed Central

Mills, Chris; Knight, James; Milligan, Gemma

2015-01-01

Ergogenic aids have been used to alter joint kinematics in an attempt to minimise injury risk, yet the effectiveness of these aids may be compromised following a bout of exercise. This preliminary study aimed to measure the effect of compression garments and Kinesio Tape® on lower extremity joint alignment prior to and following an exercise bout. Eight male athletes (age = 24.1 ± 3.0 years, body height = 177.4 ± 5.2 cm, body mass = 72.3 ± 7.2 kg) volunteered to participant in this study. Joint kinematics were recorded whilst all participants performed three rotational lunges, in three conditions (control, compression garment, Kinesio Tape®), prior to and following a 10 minute exercise bout. Frontal plane kinematics (lateral pelvic tilt, knee valgus, ankle inversion/eversion) were used to assess ergogenic aid effectiveness during the lunge. Participants exhibited no significant differences in joint kinematics between ergogenic aid conditions prior to the exercise bout. Following exercise the only significant difference occurred within the Kinesio Tape® condition where maximum knee valgus angle significantly increased from 6.5° prior to exercise, to 7.7° following the exercise bout. The results of this study suggest joint kinematics are not affected by the ergogenic aids in this study prior to an exercise bout. However, there is evidence to suggest that the application of Kinesio Tape® may allow an increase in knee valgus angle following a bout of exercise, yet, compression garments are effective at maintaining joint alignment following a bout of exercise. PMID:25964805

ED-WAVE tool design approach: Case of a textile wastewater treatment plant in Blantyre, Malawi

NASA Astrophysics Data System (ADS)

Chipofya, V.; Kraslawski, A.; Avramenko, Y.

The ED-WAVE tool is a PC based package for imparting training on wastewater treatment technologies. The system consists of four modules viz. Reference Library, Process Builder, Case Study Manager, and Treatment Adviser. The principles of case-based design and case-based reasoning as applied in the ED-WAVE tool are utilised in this paper to evaluate the design approach of the wastewater treatment plant at Mapeto David Whitehead & Sons (MDW&S) textile and garments factory, Blantyre, Malawi. The case being compared with MDW&S in the ED-WAVE tool is Textile Case 4 in Sri Lanka (2003). Equalisation, coagulation and rotating biological contactors is the sequencing of treatment units at Textile Case 4 in Sri Lanka. Screening, oxidation ditches and sedimentation is the sequencing of treatment units at MDW&S textile and garments factory. The study suggests that aerobic biological treatment is necessary in the treatment of wastewater from a textile and garments factory. MDW&S incorporates a sedimentation process which is necessary for the removal of settleable matter before the effluent is discharged to the municipal wastewater treatment plant. The study confirmed the practical use of the ED-WAVE tool in the design of wastewater treatment systems, where after encountering a new situation; already collected decision scenarios (cases) are invoked and modified in order to arrive at a particular design alternative. What is necessary, however, is to appropriately modify the case arrived at through the Case Study Manager in order to come up with a design appropriate to the local situation taking into account technical, socio-economic and environmental aspects.

16 CFR 1610.61 - Reasonable and representative testing to assure compliance with the standard for the clothing...

Code of Federal Regulations, 2011 CFR

2011-01-01

..., olefin, polyester, wool, or any combination of these fibers, regardless of weight.) If no exemptions... sweaters; polyester/cotton and 100% cotton fleece/sherpa garments, and 100% cotton terry cloth robes...

Crew appliance concepts. Volume 3, appendix B: Shuttle orbiter appliances supporting engineering data

NASA Technical Reports Server (NTRS)

Proctor, B. W.; Reysa, R. P.; Russell, D. J.

1975-01-01

Technical data collected for housekeeping, off-duty activities, and medical appliances considered for the shuttle orbiter are presented. Equipment cleaning, refuse management, garment/linen maintenance, entertainment, physical conditioning, sterilization, and physical monitoring were analyzed.

A Team Approach to Special Needs Garment Design.

ERIC Educational Resources Information Center

Menec, Janet M.

1989-01-01

The author describes a collaborative project involving a textiles and clothing specialist, an occupational therapist, and a wheelchair-bound disabled woman to design and construct an apron that facilitated independence in daily living for the disabled woman. (Author/CH)

Pilot Fullerton dons EES anti-gravity suit lower torso on middeck

NASA Technical Reports Server (NTRS)

1982-01-01

Pilot Fullerton dons ejection escape suit (EES) anti-gravity (anti-g) suit lower torso on forward port side middeck above potable water tank. Anti-g suit is an olive drab inner garment that complements EES.

Microgravity

NASA Image and Video Library

1994-03-04

Onboard Space Shuttle Columbia (STS-62) Pilot Andrew M. Allen looks over a procedures book in the midst of a 14-day mission. Allen is attired in a new thermally controlled undergarment. Allen wore the garment during the launch and entry phases of the flight.

78 FR 5247 - Martin Luther King, Jr., Federal Holiday, 2013

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-24

... continuous struggle.'' Throughout the 1950s and 1960s, he mobilized multitudes of men and women to take on a... that ``we are caught in an inescapable network of mutuality, tied in a single garment of destiny...

Association of Lower Limb Compression Garments During High-Intensity Exercise with Performance and Physiological Responses: A Systematic Review and Meta-analysis.

PubMed

da Silva, César Augusto; Helal, Lucas; da Silva, Roberto Pacheco; Belli, Karlyse Claudino; Umpierre, Daniel; Stein, Ricardo

2018-05-02

Although compression garments are used to improve sports performance, methodological approaches and the direction of evidence regarding garments for use in high-intensity exercise settings are diverse. Our primary aim was to summarize the association between lower-limb compression garments (LLCGs) and changes in sports performance during high-intensity exercise. We also aimed to summarize evidence about the following physiological parameters related to sports performance: vertical jump height (VJ), maximal oxygen uptake (VO 2 max), submaximal oxygen uptake (VO 2 submax), blood lactate concentrations ([La]), and ratings of perceived exertion (RPE, 6-20 Borg scale). We searched electronic databases (PubMed, EMBASE, Cochrane Library, and ClinicalTrials.gov) and reference lists for previous reviews. Eligible studies included randomized controlled trials with athletes or physically active subjects (≥ 18 years) using any type of LLCG during high-intensity exercise. The results were described as weighted mean difference (WMD) with a 95% confidence interval (95% CI). The 23 included studies showed low statistical heterogeneity for the pooled outcomes. We found that LLCGs yielded similar running performance to controls (50-400 m: WMD 0.06 s [95% CI - 1.99 to 2.11]; 800-3000 m: WMD 6.10 s [95% CI - 7.23 to 19.43]; > 5000 m: WMD 1.01 s [95% CI - 84.80 to 86.82]). Likewise, we found no evidence that LLCGs were superior in secondary outcomes (VJ: WMD 2.25 cm [95% CI - 2.51 to 7.02]; VO 2 max: WMD 0.24 mL.kg -1 .min -1 [95% CI - 1.48 to 1.95]; VO 2 submax: WMD - 0.26 mL.kg -1 .min -1 [95% CI - 2.66 to 2.14]; [La]: WMD 0.19 mmol/L [95% CI - 0.22 to 0.60]; RPE: WMD - 0.20 points [95% CI - 0.48 to 0.08]). LLCGs were not associated with improved performance in VJ, VO 2 max, VO 2 submax, [La], or RPE during high-intensity exercise. Such evidence should be taken into account when considering using LLCGs to enhance running performance.

29 CFR 785.24 - Principles noted in Portal-to-Portal Bulletin.

Code of Federal Regulations, 2010 CFR

2010-07-01

... his machine, or install a new cutting tool. Such activities are an integral part of the principal activity, and are included within such term. (2) In the case of a garment worker in a textile mill, who is...

75 FR 75676 - Smart Garments v. Worldlink Logix Services, Inc.; Notice of Filing of Complaint and Assignment

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-06

... Respondent WLLS is a ``freight forwarder/common carrier'' incorporated in New York and licensed by the Commission. Complainant states that it engaged Respondent as ``a shipping agency'' to ship two containers...

16 CFR § 1616.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) Diapers and underwear; and (2) “Tight-fitting garments” as defined by section 1616.2(m), below. (b) Sizes... garment is more likely to catch fire.” The hangtag must measure 11/2″ × 61/4″. The text must be enclosed...

16 CFR 1616.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) Diapers and underwear; and (2) “Tight-fitting garments” as defined by section 1616.2(m), below. (b) Sizes... garment is more likely to catch fire.” The hangtag must measure 11/2″ × 61/4″. The text must be enclosed...

16 CFR 1616.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) Diapers and underwear; and (2) “Tight-fitting garments” as defined by section 1616.2(m), below. (b) Sizes... garment is more likely to catch fire.” The hangtag must measure 11/2″ × 61/4″. The text must be enclosed...

Prevalence and test characteristics of national health safety network ventilator-associated events.

PubMed

Lilly, Craig M; Landry, Karen E; Sood, Rahul N; Dunnington, Cheryl H; Ellison, Richard T; Bagley, Peter H; Baker, Stephen P; Cody, Shawn; Irwin, Richard S

2014-09-01

The primary aim of the study was to measure the test characteristics of the National Health Safety Network ventilator-associated event/ventilator-associated condition constructs for detecting ventilator-associated pneumonia. Its secondary aims were to report the clinical features of patients with National Health Safety Network ventilator-associated event/ventilator-associated condition, measure costs of surveillance, and its susceptibility to manipulation. Prospective cohort study. Two inpatient campuses of an academic medical center. Eight thousand four hundred eight mechanically ventilated adults discharged from an ICU. None. The National Health Safety Network ventilator-associated event/ventilator-associated condition constructs detected less than a third of ventilator-associated pneumonia cases with a sensitivity of 0.325 and a positive predictive value of 0.07. Most National Health Safety Network ventilator-associated event/ventilator-associated condition cases (93%) did not have ventilator-associated pneumonia or other hospital-acquired complications; 71% met the definition for acute respiratory distress syndrome. Similarly, most patients with National Health Safety Network probable ventilator-associated pneumonia did not have ventilator-associated pneumonia because radiographic criteria were not met. National Health Safety Network ventilator-associated event/ventilator-associated condition rates were reduced 93% by an unsophisticated manipulation of ventilator management protocols. The National Health Safety Network ventilator-associated event/ventilator-associated condition constructs failed to detect many patients who had ventilator-associated pneumonia, detected many cases that did not have a hospital complication, and were susceptible to manipulation. National Health Safety Network ventilator-associated event/ventilator-associated condition surveillance did not perform as well as ventilator-associated pneumonia surveillance and had several undesirable characteristics.

The Fashion World's Harvard

ERIC Educational Resources Information Center

Bard, Bernard

1974-01-01

Fashion Institute of Technology (FIT), a successful community college in New York's garment district, is a fashion industry in minature. Two-thirds of the courses are technical or professional, the remaining are liberal arts and placement of graduates runs at 85-90 percent per year. (Author/PG)

75 FR 22739 - First Antidumping Duty Administrative Review of Steel Wire Hangers From the People's Republic of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-30

... Administrative Review of Steel Wire Hangers From the People's Republic of China: Extension of Time Limit for the... the antidumping duty order on steel wire garment hangers from the People's Republic of China (``PRC...

JPRS Report, China

DTIC Science & Technology

1989-06-09

in the suburbs of Beijing. But they must be made more productive, said Bai Youguang, director of Beijing’s municipal government’s Agroforestry ...prises, building materials and the textiles and garments industry," said Zhuang Peiwei, an official with the municipal government’s Agroforestry

76 FR 22733 - Investigations Regarding Certifications of Eligibility To Apply for Worker Adjustment Assistance...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-22

...). 80090 Whitman Packaging Corp. Islandia, NY 04/06/11 03/31/11 (State/One-Stop). 80091 G&G Garments (State... Company (Company). 80099 Siemens Industry Inc. Bellefontaine, OH......... 04/08/11 04/08/11 (Workers). [FR...

21 CFR 110.10 - Personnel.

Code of Federal Regulations, 2010 CFR

2010-04-01

... CONSUMPTION CURRENT GOOD MANUFACTURING PRACTICE IN MANUFACTURING, PACKING, OR HOLDING HUMAN FOOD General... contamination of food. The methods for maintaining cleanliness include, but are not limited to: (1) Wearing outer garments suitable to the operation in a manner that protects against the contamination of food...

16 CFR 1615.1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., except: (1) Diapers and underwear; (2) “Infant garments,” as defined by section 1615.1(c), below; and (3... more likely to catch fire.” The hangtag must measure 11/2″×61/4″. The text must be enclosed in a text...

16 CFR § 1615.1 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., except: (1) Diapers and underwear; (2) “Infant garments,” as defined by section 1615.1(c), below; and (3... more likely to catch fire.” The hangtag must measure 11/2″×61/4″. The text must be enclosed in a text...

16 CFR 1615.1 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., except: (1) Diapers and underwear; (2) “Infant garments,” as defined by section 1615.1(c), below; and (3... more likely to catch fire.” The hangtag must measure 11/2″×61/4″. The text must be enclosed in a text...

Anaesthesia ventilators.

PubMed

Jain, Rajnish K; Swaminathan, Srinivasan

2013-09-01

Anaesthesia ventilators are an integral part of all modern anaesthesia workstations. Automatic ventilators in the operating rooms, which were very simple with few modes of ventilation when introduced, have become very sophisticated with many advanced ventilation modes. Several systems of classification of anaesthesia ventilators exist based upon various parameters. Modern anaesthesia ventilators have either a double circuit, bellow design or a single circuit piston configuration. In the bellows ventilators, ascending bellows design is safer than descending bellows. Piston ventilators have the advantage of delivering accurate tidal volume. They work with electricity as their driving force and do not require a driving gas. To enable improved patient safety, several modifications were done in circle system with the different types of anaesthesia ventilators. Fresh gas decoupling is a modification done in piston ventilators and in descending bellows ventilator to reduce th incidence of ventilator induced volutrauma. In addition to the conventional volume control mode, modern anaesthesia ventilators also provide newer modes of ventilation such as synchronised intermittent mandatory ventilation, pressure-control ventilation and pressure-support ventilation (PSV). PSV mode is particularly useful for patients maintained on spontaneous respiration with laryngeal mask airway. Along with the innumerable benefits provided by these machines, there are various inherent hazards associated with the use of the ventilators in the operating room. To use these workstations safely, it is important for every Anaesthesiologist to have a basic understanding of the mechanics of these ventilators and breathing circuits.

Evaluation of ventilators for mouthpiece ventilation in neuromuscular disease.

PubMed

Khirani, Sonia; Ramirez, Adriana; Delord, Vincent; Leroux, Karl; Lofaso, Frédéric; Hautot, Solène; Toussaint, Michel; Orlikowski, David; Louis, Bruno; Fauroux, Brigitte

2014-09-01

Daytime mouthpiece ventilation is a useful adjunct to nocturnal noninvasive ventilation (NIV) in patients with neuromuscular disease. The aims of the study were to analyze the practice of mouthpiece ventilation and to evaluate the performance of ventilators for mouthpiece ventilation. Practice of mouthpiece ventilation was assessed by a questionnaire, and the performance of 6 home ventilators with mouthpiece ventilation was assessed in a bench test using 24 different conditions per ventilator: 3 mouthpieces, a child and an adult patient profile, and 4 ventilatory modes. Questionnaires were obtained from 30 subjects (mean age 33 ± 11 y) using NIV for 12 ± 7 y. Fifteen subjects used NIV for > 20 h/day, and 11 were totally ventilator-dependent. The subject-reported benefits of mouthpiece ventilation were a reduction in dyspnea (73%) and fatigue (93%) and an improvement in speech (43%) and eating (27%). The bench study showed that none of the ventilators, even those with mouthpiece ventilation software, were able to deliver mouthpiece ventilation without alarms and/or autotriggering in each condition. Alarms and/or ineffective triggering or autotriggering were observed in 135 of the 198 conditions. The occurrence of alarms was more common with a large mouthpiece without a filter compared to a small mouthpiece with a filter (P < .001), but it was not related to the patient profile, the ventilatory mode, or the type of ventilator. Subjects are satisfied with mouthpiece ventilation. Alarms are common with home ventilators, although less common in those with mouthpiece ventilation software. Improvements in home ventilators are needed to facilitate the expansion of mouthpiece ventilation. Copyright © 2014 by Daedalus Enterprises.

Effects of the HEET garment in the prevention of hypothermia in a porcine model.

PubMed

Johnson, Don; Gegel, Brian; Burgert, James; Duncklee, Geoffrey W; Robison, Ricci R; Lewis, Eric J; Crum, Paul M; Kuhns, William; Moore, Daniel; O'Brien, Scott; Elliott, Joel; Washington, Jason; Boyle, John; Seigler, Dale

2010-11-01

Hypothermia is a common battlefield trauma occurrence. This study compared the effectiveness of the hypothermia, environmental, exposure, and trauma (HEET) garment (Trident Industries, Beaufort, SC) with and without thermal inserts with a control group of two wool blankets in the prevention of hypothermia in a treated hypovolemic porcine model. Five female swine (Sus scrofa-Yorkshire cross) were assigned to each of three groups: HEET with thermal inserts (n=5); HEET without thermal inserts (n=5); or control (n=5). After the animals were anesthetized and stabilized for 30 min, the swine were hemorrhaged to a mean arterial pressure (MAP) of 30 mm Hg, simulating a battlefield injury. Hetastarch 6% (500 mL) was rapidly administered, simulating initial field resuscitation. One hour later, the animals' shed blood was reinfused, simulating transfusion at a field medical facility. The investigators moved the animal into a cooler set at 10°C ± 0.5°C. A pulmonary artery catheter was used to monitor core body temperature over a 6-h period. A repeated measures ANOVA and Tukey's post hoc test were used to analyze the data. There was a significant difference between the groups. At the end of 6h, the mean core temperature for the HEET with inserts group was 32.69°C ± 1.5; the HEET without inserts, 31.02°C ± 1.8; and control, 34.78°C ± 1.2 (P<0.05). While all groups became hypothermic, the wool blanket group was most effective in maintaining body temperature closer to normothermia. The HEET garments with and without heaters are ineffective in preventing hypothermia. Copyright © 2010 Elsevier Inc. All rights reserved.

Impaired cardiorespiratory responses when wearing an upper body compression garment during recovery in a hot environment (40 ºC).

PubMed

Leoz-Abaurrea, Iker; Tam, Nicholas; Aguado-JIMéNEZ, Roberto

2016-06-01

Previous studies have not investigated the effects of a heat dissipating upper body compression garment (UBCG) during cycling in a hot environment. The present study examined the effects of a heat dissipating UBCG on thermoregulatory, cardiorespiratory and perceptual responses (thermal sensation and exertion scales), during cycling at a fixed workload (~50% VO2peak) and during active recovery (~25% VO2peak). Thirteen untrained males (mean±SD; age 21±6 years, VO2peak 53.7±5.0 ml·kg-1·min-1) completed two randomized cycling trials consisting of a 5 min rest on a cycling ergometer, followed by 4 bouts of 14 min at a fixed load + 1 min active recovery. Followed further by 10 min of active recovery. Testing occurred in a hot environment (~40±0.4 ºC, 35±2 % relative humidity, ~2.5 m·s-1 air velocity) and volunteers wore either a UBCG or non-UBCG (CON). Wearing UBCG resulted in significantly smaller reduction in heart rate (31±11 bpm vs. 46±15 bpm) and higher VO2 and VCO2 values (P<0.05) during 10 min recovery period. No differences in rectal, skin and body temperature were observed during the trial between garment conditions. Clothing wetness sensation remained significantly higher wearing CON (P<0.05) during exercise although no significant differences in weight loss or in sweat rate were observed. These results suggest that wearing heat dissipating UBCG had no thermoregulatory benefits during exercise and it had impaired cardiorespiratory responses during active recovery when exercising in a hot environment.

Thermoregulation and heat exchange in a nonuniform thermal environment during simulated extended EVA. Extravehicular activities

NASA Technical Reports Server (NTRS)

Koscheyev, V. S.; Leon, G. R.; Hubel, A.; Nelson, E. D.; Tranchida, D.

2000-01-01

BACKGROUND: Nonuniform heating and cooling of the body, a possibility during extended duration extravehicular activities (EVA), was studied by means of a specially designed water circulating garment that independently heated or cooled the right and left sides of the body. The purpose was to assess whether there was a generalized reaction on the finger in extreme contradictory temperatures on the body surface, as a potential heat status controller. METHOD: Eight subjects, six men and two women, were studied while wearing a sagittally divided experimental garment with hands exposed in the following conditions: Stage 1 baseline--total body garment inlet water temperature at 33 degrees C; Stage 2--left side inlet water temperature heated to 45 degrees C; right side cooled to 8 degrees C; Stage 3--left side inlet water temperature cooled to 8 degrees C, right side heated to 45 degrees C. RESULTS: Temperatures on each side of the body surface as well as ear canal temperature (Tec) showed statistically significant Stage x Side interactions, demonstrating responsiveness to the thermal manipulations. Right and left finger temperatures (Tfing) were not significantly different across stages; their dynamic across time was similar. Rectal temperature (Tre) was not reactive to prevailing cold on the body surface, and therefore not informative. Subjective perception of heat and cold on the left and right sides of the body was consistent with actual temperature manipulations. CONCLUSIONS: Tec and Tre estimates of internal temperature do not provide accurate data for evaluating overall thermal status in nonuniform thermal conditions on the body surface. The use of Tfing has significant potential in providing more accurate information on thermal status and as a feedback method for more precise thermal regulation of the astronaut within the EVA space suit.

Superficial cooling does not decrease core body temperature before, during, or after exercise in an American football uniform.

PubMed

Lopez, Rebecca M; Eberman, Lindsey E; Cleary, Michelle A

2012-12-01

The purpose of this study was to identify the effects of superficial cooling on thermoregulatory responses while exercising in a hot humid environment while wearing an American football uniform. Nine male and female subjects wore a superficial cooling garment while in a cooling (CS) experimental condition or a no cooling (NCS) control condition during an exercise task consisting of warm-up (WU), exercise (EX), and recovery (R). The exercise task simulated an American football conditioning session with subjects wearing a full American football uniform and performing anaerobic and aerobic exercises in a hot humid environment. Subjects were allowed to drink water ad libitum during rest breaks. During the WU, EX, and R periods, core body temperature (T(c)) was measured to assess the effect of the cooling garment. Neither baseline resting before warm-up T(c) nor after warm-up T(c) was significantly different between trials. No significant differences in exercise T(c) between conditions were found. Time to return to baseline T(c) revealed no significant differences between the experimental and control conditions. The authors found that the volume of fluid consumed was 34% less in the experimental condition (711.1 ± 188.0 ml) compared with the control condition (1,077.8 ± 204.8 ml). The findings indicate that the cooling garment was not effective in blunting the rise in T(c) during warm-up, attenuating a rise in T(c) during intermittent exercise, or in increasing a return to baseline T(c) during a resting recovery period in a hot humid environment while wearing an American football uniform.

Cryotherapy Reinvented: Application of Phase Change Material for Recovery in Elite Soccer.

PubMed

Clifford, Tom; Abbott, Will; Kwiecien, Susan Y; Howatson, Glyn; McHugh, Malachy P

2018-05-01

To examine whether donning lower-body garments fitted with cooled phase change material (PCM) would enhance recovery after a soccer match. In a randomized, crossover design, 11 elite soccer players from the reserve squad of a team in the second-highest league in England wore PCM cooled to 15°C (PCM cold ) or left at ambient temperature (PCM amb ; sham control) for 3 h after a soccer match. To assess recovery, countermovement jump height, maximal isometric voluntary contraction (MIVC), muscle soreness, and the adapted Brief Assessment of Mood Questionnaire (BAM+) were measured before 12, 36, and 60 h after each match. A belief questionnaire was completed preintervention and postintervention to determine the perceived effectiveness of each garment. Results are comparisons between the 2 conditions at each time point postmatch. MIVC at 36 h postmatch was greater with PCM cold versus PCM warm (P = .01; ES = 1.59; 95% CI, 3.9-17.1%). MIVC also tended to be higher at 60 h postmatch (P = .05; ES = 0.85; 95% CI, -0.4% to 11.1%). Muscle soreness was 26.5% lower in PCM cold versus PCM warm at 36 h (P = .02; ES = 1.7; 95% CI, -50.4 to -16.1 mm) and 24.3% lower at 60 h (P = .04; ES = 1.1; 95% CI, -26.9 to -0.874 mm). There were no between-conditions differences in postmatch countermovement jump height or BAM+ (P > .05). The belief questionnaire revealed that players felt the PCM cold was more effective than the PCM amb after the intervention (P = .004). PCM cooling garments provide a practical means of delivering prolonged postexercise cooling and thereby accelerate recovery in elite soccer players.

Hand immersion in cold water alleviating physiological strain and increasing tolerance to uncompensable heat stress.

PubMed

Khomenok, Gennadi A; Hadid, Amir; Preiss-Bloom, Orahn; Yanovich, Ran; Erlich, Tomer; Ron-Tal, Osnat; Peled, Amir; Epstein, Yoram; Moran, Daniel S

2008-09-01

The current study examines the use of hand immersion in cold water to alleviate physiological strain caused by exercising in a hot climate while wearing NBC protective garments. Seventeen heat acclimated subjects wearing a semi-permeable NBC protective garment and a light bulletproof vest were exposed to a 125 min exercise-heat stress (35 degrees C, 50% RH; 5 km/h, 5% incline). The heat stress exposure routine included 5 min rest in the chamber followed by two 50:10 min work-rest cycles. During the control trial (CO), there was no intervention, whilst in the intervention condition the subjects immersed their hands and forearms in a 10 degrees C water bath (HI). The results demonstrated that hand immersion in cold water significantly reduced physiological strain. In the CO exposure during the first and second resting periods, the average rectal temperature (T (re)) practically did not decrease. With hand immersion, the mean (SD) T (re) decreased by 0.45 (0.05 degrees C) and 0.48 degrees C (0.06 degrees C) during the first and second rest periods respectively (P < 0.005). Significant decreases in skin temperature, sweat rate, heart rate, and heat storage was also noted in the HI vs. the CO trials. Tolerance time in the HI exposure were longer than in the CO exposure (only 12 subjects in the CO trial endured the entire heat exposure session, as opposed to all 17 subjects in the HI group). It is concluded that hand immersion in cold water for 10 min is an effective method for decreasing the physiological strain caused by exercising under heat stress while wearing NBC protective garments. The method is convenient, simple, and allows longer working periods in hot or contaminated areas with shorter resting periods.

Effects of skin pressure by clothing on digestion and orocecal transit time of food.

PubMed

Sone, Y; Kato, N; Kojima, Y; Takasu, N; Tokura, H

2000-05-01

In order to reveal the influence of clothing skin pressure on digestion of food through the gastrointestinal tract, we examined the absorption of dietary carbohydrate and orocecal transit time of a test meal by means of a breath hydrogen test on 7 healthy young women. In this experiment, we collected breath samples from the participants wearing loose-fitting experimental garment on the second day of the experiment and from the same participants but wearing an additional tight-fitting girdle on the following day for 16 hours and 9 hours, respectively. Skin pressure applied by a girdle on participant's waist, abdomen and hip region was 15.5 +/- 0.4 mmHg (mean +/- SE), 11.0 +/- 0.2 mmHg, and 13.6 +/- 0.6 mmHg, respectively, and the values were 2-3 times larger than those of the experimental garment. The hydrogen concentration vs. time curve showed that breath hydrogen levels at its peaks (15:00, 15:30, 16:00, 16:30, and 17:00 hr) on the third day of the experiment were significantly higher than those of the corresponding time on the second day (p < 0.05 at 17:00 and 15:00, p < 0.01 at 15:00, 16:00 and 16:30). Consequently, significantly pronounced breath hydrogen excretion was observed under the "pressure" clothing condition (p < 0.01). On the other hand, the transit time of the test meal for the subjects wearing a girdle did not differ significantly from that for the subjects wearing the garment of less pressure (270 +/- 18 minutes and 263 +/- 21 minutes, respectively). These results indicate that the clothing skin pressure has an inhibitory effect on the absorption of dietary carbohydrate in the small intestine, but no effect on the orocecal transit time of a meal.

Operational Characteristics of Two Commercially Available Personal Cooling Vests

NASA Technical Reports Server (NTRS)

Ku, Yu-Tsuan E.; Lee, Hank C.; Montgomery, Leslie D.; Webbon, Bruce W.; Luna, Bernadette (Technical Monitor)

1996-01-01

Personal thermoregulatory systems which provide chest cooling are used in the industrial and aerospace environments to alleviate thermal stress. However, little information is available regarding the physiologic and circulatory changes produced by routine operation of these systems. The objectives of this study were to compare the effectiveness of two passive cooling vests, and to measure the body temperature and circulatory changes produced by each cooling vest configuration. A Life Enhancement Technologies, (LET) ice vest garment and a Steele, Inc. vest were used to cool the chest region of 11 male subjects (25 to 55 yr) in this study. Calf, forearm and finger blood flows were measured using a tetrapolar impedance rheograph. The subjects, seated in an upright position at normal room temperature (approximately 21 C) were tested for 60 min. with the cooling system operating at its maximum cooling capacity. Blood flows were recorded continuously using a computer data acquisition system with a sampling frequency of 250 Hz. Oral, right and left ear temperatures and cooling system parameters were logged manually every 5 min. Arm, leg, chest and rectal temperatures; heart rate; respiration; and an activity index were recorded continuously on a U.F.I., Inc. Biolog ambulatory monitor. No significant differences were found in either the oral or ear temperature responses to the two vests. However, the rectal and mean skin temperatures at the end of the cooling period were both significantly lower (P less than 0.05), approximately 0.2 and 1.9 C, respectively for the LET vest than for the Steele garment. These data show that different vest configurations may produce different thermal responses in healthy male subjects which should be considered in the use of these cooling garments.

Tracing Surrogates for Enteric Pathogens Inoculated on Hide through the Beef Harvesting Process.

PubMed

Villarreal-Silva, Mariana; Genho, Daniel P; Ilhak, Irfan; Lucia, Lisa M; Dickson, James S; Gehring, Kerri B; Savell, Jeffrey W; Castillo, Alejandro

2016-11-01

Multiple antimicrobial interventions have been validated for use during the beef postharvesting process. However, little has been done to determine the impact of the postharvest environment on pathogen contamination. In this study, surrogate microorganisms were used to simulate pathogen cross-contamination through the postharvest environment at three different abattoirs. At each abattoir, the brisket areas of 13 hide-on carcasses were inoculated after stunning, with a gelatin slurry containing a cocktail (~7 log CFU/ml) of fluorescent Escherichia coli biotype I. These microorganisms are approved as surrogates for E. coli O157:H7 and Salmonella . From these carcasses, samples (300 cm 2 ) were taken at different stages during the harvesting process: after hide opening, prior to evisceration, after evisceration, after splitting, and after final intervention. The carcass (noninoculated) immediately following (adjacent to) each hide-inoculated carcass was also tested to determine cross-contamination. Environmental (floor, walls, air) and personal garment (gloves, boots, aprons) samples were collected. Other sampled equipment included knives, meat hooks, hide pullers, and splitting saws. Results demonstrated that cross-contamination occurred between the inoculated hide and the carcass and also by transfer of microorganisms to the adjacent, noninoculated carcasses. Microbial transfer also occurred from hides or carcasses to the environment, personal garments, and equipment. Counts of the surrogate bacteria used were higher in equipment samples (15%) than in environment samples (10%). Personal garments had the lowest occurrence of cross-contamination (7%). For all abattoirs, surrogates were undetected on the carcass (<1.4 log CFU/300cm 2 ) after the final intervention stage. This study confirms the importance of following adequate procedures for carcass dressing and highlights an adequate hide opening procedure as a crucial step to prevent carcass contamination.

Thermoregulation and heat exchange in a nonuniform thermal environment during simulated extended EVA. Extravehicular activities.

PubMed

Koscheyev, V S; Leon, G R; Hubel, A; Nelson, E D; Tranchida, D

2000-06-01

Nonuniform heating and cooling of the body, a possibility during extended duration extravehicular activities (EVA), was studied by means of a specially designed water circulating garment that independently heated or cooled the right and left sides of the body. The purpose was to assess whether there was a generalized reaction on the finger in extreme contradictory temperatures on the body surface, as a potential heat status controller. Eight subjects, six men and two women, were studied while wearing a sagittally divided experimental garment with hands exposed in the following conditions: Stage 1 baseline--total body garment inlet water temperature at 33 degrees C; Stage 2--left side inlet water temperature heated to 45 degrees C; right side cooled to 8 degrees C; Stage 3--left side inlet water temperature cooled to 8 degrees C, right side heated to 45 degrees C. Temperatures on each side of the body surface as well as ear canal temperature (Tec) showed statistically significant Stage x Side interactions, demonstrating responsiveness to the thermal manipulations. Right and left finger temperatures (Tfing) were not significantly different across stages; their dynamic across time was similar. Rectal temperature (Tre) was not reactive to prevailing cold on the body surface, and therefore not informative. Subjective perception of heat and cold on the left and right sides of the body was consistent with actual temperature manipulations. Tec and Tre estimates of internal temperature do not provide accurate data for evaluating overall thermal status in nonuniform thermal conditions on the body surface. The use of Tfing has significant potential in providing more accurate information on thermal status and as a feedback method for more precise thermal regulation of the astronaut within the EVA space suit.

Potential risk for bacterial contamination in conventional reused ventilator systems and disposable closed ventilator-suction systems.

PubMed

Li, Ya-Chi; Lin, Hui-Ling; Liao, Fang-Chun; Wang, Sing-Siang; Chang, Hsiu-Chu; Hsu, Hung-Fu; Chen, Sue-Hsien; Wan, Gwo-Hwa

2018-01-01

Few studies have investigated the difference in bacterial contamination between conventional reused ventilator systems and disposable closed ventilator-suction systems. The aim of this study was to investigate the bacterial contamination rates of the reused and disposable ventilator systems, and the association between system disconnection and bacterial contamination of ventilator systems. The enrolled intubated and mechanically ventilated patients used a conventional reused ventilator system and a disposable closed ventilator-suction system, respectively, for a week; specimens were then collected from the ventilator circuit systems to evaluate human and environmental bacterial contamination. The sputum specimens from patients were also analyzed in this study. The detection rate of bacteria in the conventional reused ventilator system was substantially higher than that in the disposable ventilator system. The inspiratory and expiratory limbs of the disposable closed ventilator-suction system had higher bacterial concentrations than the conventional reused ventilator system. The bacterial concentration in the heated humidifier of the reused ventilator system was significantly higher than that in the disposable ventilator system. Positive associations existed among the bacterial concentrations at different locations in the reused and disposable ventilator systems, respectively. The predominant bacteria identified in the reused and disposable ventilator systems included Acinetobacter spp., Bacillus cereus, Elizabethkingia spp., Pseudomonas spp., and Stenotrophomonas (Xan) maltophilia. Both the reused and disposable ventilator systems had high bacterial contamination rates after one week of use. Disconnection of the ventilator systems should be avoided during system operation to decrease the risks of environmental pollution and human exposure, especially for the disposable ventilator system. ClinicalTrials.gov PRS / NCT03359148.

Sri Lanka: Background and U.S. Relations

DTIC Science & Technology

2006-08-01

See also CRS Report RL32715, Indian Ocean Earthquake and Tsunami.) Economy Formerly a colonial economy based on plantation crops (tea, rubber, coconut ... sugar , and rice), modern Sri Lanka’s manufactured products account for nearly 80% of the country’s exports, including garments, textiles, gems, as

The Levi Strauss Project: Development of a Curriculum.

ERIC Educational Resources Information Center

Bell, Jill

1982-01-01

A program initiated by a garment company and carried out in cooperation with a board of education focused on conversational skills and industry jargon as well as problem-solving language. The program's development is described, including an evaluation and suggestions by a company manager. (MSE)

21 CFR 120.6 - Sanitation standard operating procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... garments; (3) Prevention of cross contamination from insanitary objects to food, food packaging material... health conditions that could result in the microbiological contamination of food, food packaging... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Sanitation standard operating procedures. 120.6...

Labeled cutaway line drawing of Shuttle Extravehicular Mobility Unit (EMU)

NASA Image and Video Library

1991-05-21

Labeled cutaway line drawing of the Shuttle extravehicular mobility unit (EMU) identifies its various components and equipment. The portable life support system (PLSS) and protective layers of fabric (thermal micrometeoroid garment (TMG)) incorporated in this extravehicular activity (EVA) space suit are shown.

Labeled cutaway line drawing of Shuttle Extravehicular Mobility Unit (EMU)

NASA Technical Reports Server (NTRS)

1991-01-01

Labeled cutaway line drawing of the Shuttle extravehicular mobility unit (EMU) identifies its various components and equipment. The portable life support system (PLSS) and protective layers of fabric (thermal micrometeoroid garment (TMG)) incorporated in this extravehicular activity (EVA) space suit are shown.

16 CFR 1615.1 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... yellow background and black lettering. The color yellow must meet the specifications for Standard Safety... must not be obscured by the hole provided for attaching the hangtag to the garment. The hangtag must be.../Helvetica in black lettering against a yellow background. The packages must be prominently, conspicuously...

Perestroika: Report from a Technicum.

ERIC Educational Resources Information Center

Semenov, B. K.

1992-01-01

Presents an interview with the administrators of a vocational school in Moscow. Explains that the school trains workers for the garment industry, hair styling, cosmetics, and food preparation. Discusses the school's history, programs, and goal-oriented approach. Describes the curriculum as experimental training with an emphasis on teacher…

9 CFR 114.7 - Personnel at licensed establishments.

Code of Federal Regulations, 2012 CFR

2012-01-01

... worn by persons while preparing biological products shall be clean. All persons, immediately before entering laboratory rooms of a licensed establishment, shall change their outer clothing or effectively cover the same with gowns or other satisfactory clean garments. (2) Unsanitary practices such as, but...

9 CFR 114.7 - Personnel at licensed establishments.

Code of Federal Regulations, 2014 CFR

2014-01-01

... worn by persons while preparing biological products shall be clean. All persons, immediately before entering laboratory rooms of a licensed establishment, shall change their outer clothing or effectively cover the same with gowns or other satisfactory clean garments. (2) Unsanitary practices such as, but...