Monte Carlo calculation model for heat radiation of inclined cylindrical flames and its application

NASA Astrophysics Data System (ADS)

Chang, Zhangyu; Ji, Jingwei; Huang, Yuankai; Wang, Zhiyi; Li, Qingjie

2017-07-01

Based on Monte Carlo method, a calculation model and its C++ calculating program for radiant heat transfer from an inclined cylindrical flame are proposed. In this model, the total radiation energy of the inclined cylindrical flame is distributed equally among a certain number of energy beams, which are emitted randomly from the flame surface. The incident heat flux on a surface is calculated by counting the number of energy beams which could reach the surface. The paper mainly studies the geometrical evaluation criterion for validity of energy beams emitted by inclined cylindrical flames and received by other surfaces. Compared to Mudan's formula results for a straight cylinder or a cylinder with 30° tilt angle, the calculated view factors range from 0.0043 to 0.2742 and the predicted view factors agree well with Mudan's results. The changing trend and values of incident heat fluxes computed by the model is consistent with experimental data measured by Rangwala et al. As a case study, incident heat fluxes on a gasoline tank, both the side and the top surface are calculated by the model. The heat radiation is from an inclined cylindrical flame generated by another 1000 m3 gasoline tank 4.6 m away from it. The cone angle of the flame to the adjacent oil tank is 45° and the polar angle is 0°. The top surface and the side surface of the tank are divided into 960 and 5760 grids during the calculation, respectively. The maximum incident heat flux on the side surface is 39.64 and 51.31 kW/m2 on the top surface. Distributions of the incident heat flux on the surface of the oil tank and on the ground around the fire tank are obtained, too.

A new attempt using LabVIEW into a computational experiment of plasma focus device

NASA Astrophysics Data System (ADS)

Kim, Myungkyu

2017-03-01

The simulation program of plasma focus device based on S. Lee's model has been first developed since 30 years ago and it is widely used to date. Originally the program made by GWbasic language, and then modified by visual basic which was included in the Microsoft Excel. Using Excel well-known to researchers is a key advantage of this program. But it has disadvantages in displaying data in same graph, in slow calculation speed, and in displaying data and calculation of smaller time step. To overcome all these points, the LabVIEW that made by national instrument and based on graphical environment is used for simulation. Furthermore it is correlated with data acquisition of experiment, once experiment being the data is directly transferred to the simulation program and then analyzes and predicts for the next shot. The mass swept factor (fm) and current factor (fc) can be easily find out using this program. This paper describes the detail function and usage of the program and compares the results with the existing one.

Internet pornography viewing preference as a risk factor for adolescent Internet addiction: The moderating role of classroom personality factors.

PubMed

Alexandraki, Kyriaki; Stavropoulos, Vasileios; Burleigh, Tyrone L; King, Daniel L; Griffiths, Mark D

2018-05-23

Background and aims Adolescent Internet pornography viewing has been significantly increased in the last decade with research highlighting its association with Internet addiction (IA). However, there is little longitudinal data on this topic, particularly in relation to peer context effects. This study aimed to examine age- and context-related variations in the Internet pornography-IA association. Methods A total of 648 adolescents, from 34 classrooms, were assessed at 16 years and then at 18 years to examine the effect of Internet pornography preference on IA in relation to the classroom context. IA was assessed using the Internet Addiction Test (Young, 1998), Internet pornography preference (over other Internet applications) was assessed with a binary (yes/no) question, and classroom introversion and openness to experience (OTE) with the synonymous subscales within the Five Factor Questionnaire (Asendorpf & Van Aken, 2003). Results Three-level hierarchical linear models were calculated. Findings showed that viewing Internet pornography exacerbates the risk of IA over time, while classroom factors, such as the average level of OTE and introversion, differentially moderate this relationship. Discussion and conclusion The study demonstrated that the contribution of Internet pornography preference (as an IA risk factor) might be increased in more extroverted classrooms and decreased in OTE classrooms.

Cancer risk estimation in Digital Breast Tomosynthesis using GEANT4 Monte Carlo simulations and voxel phantoms.

PubMed

Ferreira, P; Baptista, M; Di Maria, S; Vaz, P

2016-05-01

The aim of this work was to estimate the risk of radiation induced cancer following the Portuguese breast screening recommendations for Digital Mammography (DM) when applied to Digital Breast Tomosynthesis (DBT) and to evaluate how the risk to induce cancer could influence the energy used in breast diagnostic exams. The organ doses were calculated by Monte Carlo simulations using a female voxel phantom and considering the acquisition of 25 projection images. Single organ cancer incidence risks were calculated in order to assess the total effective radiation induced cancer risk. The screening strategy techniques considered were: DBT in Cranio-Caudal (CC) view and two-view DM (CC and Mediolateral Oblique (MLO)). The risk of cancer incidence following the Portuguese screening guidelines (screening every two years in the age range of 50-80years) was calculated by assuming a single CC DBT acquisition view as standalone screening strategy and compared with two-view DM. The difference in the total effective risk between DBT and DM is quite low. Nevertheless in DBT an increase of risk for the lung is observed with respect to DM. The lung is also the organ that is mainly affected when non-optimal beam energy (in terms of image quality and absorbed dose) is used instead of an optimal one. The use of non-optimal energies could increase the risk of lung cancer incidence by a factor of about 2. Copyright © 2016 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Preservation of Thermal Control Specular Gold Baffle Surface on the James Webb Space Telescope (JWST) Integrated Science Instrument Module (ISIM) Electronics Compartment (IEC)

NASA Technical Reports Server (NTRS)

MonteedeGarcia, Kristina; Patel, Jignasha; Perry, Radford, III

2010-01-01

Extremely tight thermal control property degradation allowances on the vapor-deposited, gold-coated IEC baffle surface, made necessary by the cryogenic JWST Observatory operations, dictate tight contamination requirements on adjacent surfaces. Theoretical degradation in emittance with contaminant thickness was calculated. Maximum allowable source outgassing rates were calculated using worst case view factors from source to baffle surface. Tight requirements pushed the team to change the design of the adjacent surfaces to minimize the outgassing sources

Preservation of thermal control specular gold baffle surface on the James Webb Space Telescope (JWST) integrated science instrument module (ISIM) electronics compartment (IEC)

NASA Astrophysics Data System (ADS)

Montt de Garcia, Kristina; Patel, Jignasha; Perry, Radford, III

2010-08-01

Extremely tight thermal control property degradation allowances on the vapor-deposited, gold-coated IEC baffle surface, made necessary by the cryogenic JWST Observatory operations, dictate tight contamination requirements on adjacent surfaces. Theoretical degradation in emittance with contaminant thickness was calculated. Maximum allowable source outgassing rates were calculated using worst case view factors from source to baffle surface. Tight requirements pushed the team to change the design of the adjacent surfaces to minimize the outgassing sources.

Analyzing Impact Factors of Airport Taxiing Delay Based on Ads-B Data

NASA Astrophysics Data System (ADS)

Li, J.; Wang, X.; Xu, Y.; Li, Q.; He, C.; Li, Y.

2017-09-01

Identifying the factors that cause taxiing delay on airports is a prerequisite for optimizing aircraft taxiing schemes, and helps improve the efficiency of taxiing system. Few of current studies had quantified the potential influencing factors and further investigated their intrinsic relationship. In view of these problems, this paper uses ADS-B data to calculate taxiing delay time by restoring taxiing route and identifying key status points, and further analyzes the impact factors of airport taxiing delay by investigating the relationship between delay time and environmental data such as weather, wind, visibility etc. The case study in Guangzhou Baiyun Airport validates the effectiveness of the proposed method.

Clinical evaluation of accommodation and ocular surface stability relavant to visual asthenopia with 3D displays

PubMed Central

2014-01-01

Background To validate the association between accommodation and visual asthenopia by measuring objective accommodative amplitude with the Optical Quality Analysis System (OQAS®, Visiometrics, Terrassa, Spain), and to investigate associations among accommodation, ocular surface instability, and visual asthenopia while viewing 3D displays. Methods Fifteen normal adults without any ocular disease or surgical history watched the same 3D and 2D displays for 30 minutes. Accommodative ability, ocular protection index (OPI), and total ocular symptom scores were evaluated before and after viewing the 3D and 2D displays. Accommodative ability was evaluated by the near point of accommodation (NPA) and OQAS to ensure reliability. The OPI was calculated by dividing the tear breakup time (TBUT) by the interblink interval (IBI). The changes in accommodative ability, OPI, and total ocular symptom scores after viewing 3D and 2D displays were evaluated. Results Accommodative ability evaluated by NPA and OQAS, OPI, and total ocular symptom scores changed significantly after 3D viewing (p = 0.005, 0.003, 0.006, and 0.003, respectively), but yielded no difference after 2D viewing. The objective measurement by OQAS verified the decrease of accommodative ability while viewing 3D displays. The change of NPA, OPI, and total ocular symptom scores after 3D viewing had a significant correlation (p < 0.05), implying direct associations among these factors. Conclusions The decrease of accommodative ability after 3D viewing was validated by both subjective and objective methods in our study. Further, the deterioration of accommodative ability and ocular surface stability may be causative factors of visual asthenopia in individuals viewing 3D displays. PMID:24612686

Impact of the circulation system on the energy balance of the building

NASA Astrophysics Data System (ADS)

Polarczyk, Iwona; Fijewski, Michał

2017-11-01

The efficiency of the hot water system is one of the factors necessary to determine the overall efficiency of the building. From the calculative point of view, it is easy to make. The article presents how working of the circulation system has an influence on the efficiency of domestic hot water system. The differences in the results was presented and based on calculations of various methods, the measurements results was also taken into account. The attention was especially paid to the possibility of using ultrasonic flowmeter for measuring the flow and energy.

Using Neural Networks to Improve the Performance of Radiative Transfer Modeling Used for Geometry Dependent Surface Lambertian-Equivalent Reflectivity Calculations

NASA Technical Reports Server (NTRS)

Fasnacht, Zachary; Qin, Wenhan; Haffner, David P.; Loyola, Diego; Joiner, Joanna; Krotkov, Nickolay; Vasilkov, Alexander; Spurr, Robert

2017-01-01

Surface Lambertian-equivalent reflectivity (LER) is important for trace gas retrievals in the direct calculation of cloud fractions and indirect calculation of the air mass factor. Current trace gas retrievals use climatological surface LER's. Surface properties that impact the bidirectional reflectance distribution function (BRDF) as well as varying satellite viewing geometry can be important for retrieval of trace gases. Geometry Dependent LER (GLER) captures these effects with its calculation of sun normalized radiances (I/F) and can be used in current LER algorithms (Vasilkov et al. 2016). Pixel by pixel radiative transfer calculations are computationally expensive for large datasets. Modern satellite missions such as the Tropospheric Monitoring Instrument (TROPOMI) produce very large datasets as they take measurements at much higher spatial and spectral resolutions. Look up table (LUT) interpolation improves the speed of radiative transfer calculations but complexity increases for non-linear functions. Neural networks perform fast calculations and can accurately predict both non-linear and linear functions with little effort.

Cross calibration of GF-1 satellite wide field of view sensor with Landsat 8 OLI and HJ-1A HSI

NASA Astrophysics Data System (ADS)

Liu, Li; Gao, Hailiang; Pan, Zhiqiang; Gu, Xingfa; Han, Qijin; Zhang, Xuewen

2018-01-01

This paper focuses on cross calibrating the GaoFen (GF-1) satellite wide field of view (WFV) sensor using the Landsat 8 Operational Land Imager (OLI) and HuanJing-1A (HJ-1A) hyperspectral imager (HSI) as reference sensors. Two methods are proposed to calculate the spectral band adjustment factor (SBAF). One is based on the HJ-1A HSI image and the other is based on ground-measured reflectance. However, the HSI image and ground-measured reflectance were measured at different dates, as the WFV and OLI imagers passed overhead. Three groups of regions of interest (ROIs) were chosen for cross calibration, based on different selection criteria. Cross-calibration gains with nonzero and zero offsets were both calculated. The results confirmed that the gains with zero offset were better, as they were more consistent over different groups of ROIs and SBAF calculation methods. The uncertainty of this cross calibration was analyzed, and the influence of SBAF was calculated based on different HSI images and ground reflectance spectra. The results showed that the uncertainty of SBAF was <3% for bands 1 to 3. Two other large uncertainties in this cross calibration were variation of atmosphere and low ground reflectance.

Real-Time 3-Dimensional Echocardiographic Assessment of Effective Regurgitant Orifice Area in Dogs With Myxomatous Mitral Valve Disease.

PubMed

Tidholm, A; Bodegård-Westling, A; Höglund, K; Häggström, J; Ljungvall, I

2017-03-01

Effective regurgitant orifice area (EROA), calculated from the vena contracta width (VCW) as the narrowest portion of the proximal regurgitant jet, might be used to estimate severity of mitral regurgitation. However, this simplified assumption only holds when the EROA is circular, which might not be true in dogs with myxomatous mitral valve disease (MMVD). Effective regurgitant orifice area in dogs with MMVD is noncircular, and using color Doppler real-time 3-dimensional (RT3D) echocardiography, measured EROA in the en face view will be significantly different from calculated EROA. Hundred and fifty-eight privately owned dogs with naturally occurring MMVD. Prospective observational study comparing en face view of EROA with calculated EROA using VCW in 4-chamber (4Ch) and 2-chamber (2Ch) view only or combined 4Ch and 2Ch views using RT3D echocardiography. The calculated EROA using the 2Ch view showed a systematic underestimation of 17% compared with the measured en face EROA corrected for body surface area. The calculated EROA using 4Ch and 4Ch + 2Ch views showed less agreement with the en face EROA, and the difference between methods increased with increasing EROA. The difference between calculated and measured EROA showed a systematic underestimation of the calculated EROA by 36% (4Ch) and 33% (4Ch + 2Ch), respectively, compared to measured en face EROA. When replacing measured EROA with calculated EROA using VCW measurements, the 2Ch view is preferred in dogs with MMVD. Copyright © 2017 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals, Inc. on behalf of the American College of Veterinary Internal Medicine.

Enhancing multi-view autostereoscopic displays by viewing distance control (VDC)

NASA Astrophysics Data System (ADS)

Jurk, Silvio; Duckstein, Bernd; Renault, Sylvain; Kuhlmey, Mathias; de la Barré, René; Ebner, Thomas

2014-03-01

Conventional multi-view displays spatially interlace various views of a 3D scene and form appropriate viewing channels. However, they only support sufficient stereo quality within a limited range around the nominal viewing distance (NVD). If this distance is maintained, two slightly divergent views are projected to the person's eyes, both covering the entire screen. With increasing deviations from the NVD the stereo image quality decreases. As a major drawback in usability, the manufacturer so far assigns this distance. We propose a software-based solution that corrects false view assignments depending on the distance of the viewer. Our novel approach enables continuous view adaptation based on the calculation of intermediate views and a column-bycolumn rendering method. The algorithm controls each individual subpixel and generates a new interleaving pattern from selected views. In addition, we use color-coded test content to verify its efficacy. This novel technology helps shifting the physically determined NVD to a user-defined distance thereby supporting stereopsis. The recent viewing positions can fall in front or behind the NVD of the original setup. Our algorithm can be applied to all multi-view autostereoscopic displays — independent of the ascent or the periodicity of the optical element. In general, the viewing distance can be corrected with a factor of more than 2.5. By creating a continuous viewing area the visualized 3D content is suitable even for persons with largely divergent intraocular distance — adults and children alike — without any deficiency in spatial perception.

Effect of element size on the solution accuracies of finite-element heat transfer and thermal stress analyses of space shuttle orbiter

NASA Technical Reports Server (NTRS)

Ko, William L.; Olona, Timothy

1987-01-01

The effect of element size on the solution accuracies of finite-element heat transfer and thermal stress analyses of space shuttle orbiter was investigated. Several structural performance and resizing (SPAR) thermal models and NASA structural analysis (NASTRAN) structural models were set up for the orbiter wing midspan bay 3. The thermal model was found to be the one that determines the limit of finite-element fineness because of the limitation of computational core space required for the radiation view factor calculations. The thermal stresses were found to be extremely sensitive to a slight variation of structural temperature distributions. The minimum degree of element fineness required for the thermal model to yield reasonably accurate solutions was established. The radiation view factor computation time was found to be insignificant compared with the total computer time required for the SPAR transient heat transfer analysis.

[Calculation of the partial function of the kidney with DMSA in pediatrics: is the evaluation of the geometric mean necessary?].

PubMed

Porn, U; Rossmüller, B; Alalp, S; Fischer, S; Dresel, S; Hahn, K

2001-08-01

For assessment of differential renal function (PF) by means of static renal scintigraphy with Tc-99m-dimercaptosuccinic acid (DMSA) the calculation of the geometric mean of counts from the anterior and posterior view is recommended. Of this retrospective study was to find out, if the anterior view is necessary to receive an accurate differential renal function by calculating the geometric mean compared to calculating PF using the counts of the posterior view only. 164 DMSA-scans of 151 children (86 f, 65 m) aged 16 d to 16 a (4.7 +/- 3.9 a) were reviewed. The scans were performed using a dual head gamma camera (Picker Prism 2000 XP, low energy ultra high resolution collimator, matrix 256 x 256, 300 kcts/view, Zoom: 1.6-2.0). Background corrected values from both kidneys anterior and posterior were obtained. Using region of interest technique PF was calculated using the counts of the dorsal view and compared with the calculated geometric mean [SQR(Ctsdors x Ctsventr)]. The differential function of the right kidney was significantly less when compared to the calculation of the geometric mean (p < 0.01). The mean difference between the PFgeom and the PFdors was 1.5 +/- 1.4%. A difference > or = 5% (5.0-9.5%) was obtained in only 6/164 scans (3.7%). Three of 6 patients presented with an underestimated PFdors due to dystopic kidneys on the left side in 2 patients and on the right side in one patient. The other 3 patients with a difference > 5% did not show any renal abnormality. The calculation of the PF from the posterior view only will give an underestimated value of the right kidney compared to the calculation of the geometric mean. This effect is not relevant for the calculation of the differential renal function in orthotopic kidneys, so that in these cases the anterior view is not necessary. However, geometric mean calculation to obtain reliable values for differential renal function should be applied in cases with an obvious anatomical abnormality.

Two-Dimensional Computational Fluid Dynamics and Conduction Simulations of Heat Transfer in Horizontal Window Frames with Internal Cavities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gustavsen, Arlid; Kohler, Christian; Dalehaug, Arvid

2008-12-01

This paper assesses the accuracy of the simplified frame cavity conduction/convection and radiation models presented in ISO 15099 and used in software for rating and labeling window products. Temperatures and U-factors for typical horizontal window frames with internal cavities are compared; results from Computational Fluid Dynamics (CFD) simulations with detailed radiation modeling are used as a reference. Four different frames were studied. Two were made of polyvinyl chloride (PVC) and two of aluminum. For each frame, six different simulations were performed, two with a CFD code and four with a building-component thermal-simulation tool using the Finite Element Method (FEM). Thismore » FEM tool addresses convection using correlations from ISO 15099; it addressed radiation with either correlations from ISO 15099 or with a detailed, view-factor-based radiation model. Calculations were performed using the CFD code with and without fluid flow in the window frame cavities; the calculations without fluid flow were performed to verify that the CFD code and the building-component thermal-simulation tool produced consistent results. With the FEM-code, the practice of subdividing small frame cavities was examined, in some cases not subdividing, in some cases subdividing cavities with interconnections smaller than five millimeters (mm) (ISO 15099) and in some cases subdividing cavities with interconnections smaller than seven mm (a breakpoint that has been suggested in other studies). For the various frames, the calculated U-factors were found to be quite comparable (the maximum difference between the reference CFD simulation and the other simulations was found to be 13.2 percent). A maximum difference of 8.5 percent was found between the CFD simulation and the FEM simulation using ISO 15099 procedures. The ISO 15099 correlation works best for frames with high U-factors. For more efficient frames, the relative differences among various simulations are larger. Temperature was also compared, at selected locations on the frames. Small differences was found in the results from model to model. Finally, the effectiveness of the ISO cavity radiation algorithms was examined by comparing results from these algorithms to detailed radiation calculations (from both programs). Our results suggest that improvements in cavity heat transfer calculations can be obtained by using detailed radiation modeling (i.e. view-factor or ray-tracing models), and that incorporation of these strategies may be more important for improving the accuracy of results than the use of CFD modeling for horizontal cavities.« less

Defining the minimum temporal and spatial scales available from a new 72-month Nimbus-7 Earth Radiation Budget climate data set

NASA Technical Reports Server (NTRS)

Randel, D. L.; Campbell, G. G.; Vonder Haar, T. H.; Smith, L.

1986-01-01

Scale factors and assumptions which were applied in calculations of global radiation budget parameters based on ERB data are discussed. The study was performed to examine the relationship between the composite global ERB map that can be generated every six days using all available data and the actual average global ERB. The wide field of view ERB instrument functioned for the first 19 months of the Nimbus-7 life, and furnished sufficient data for calculating actual ERB averages. The composite was most accurate in regions with the least variation in radiation budget.

Prospect of the high efficiency for the VEST (Via-hole Etching for the Separation of Thin films) cell

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deguchi, M.; Kawama, Y.; Matsuno, Y.

1994-12-31

The optimum design of the via-holes for the VEST cell was studied. Using a simple model, fill factors of the VEST cell were calculated. As for the via-hole distribution pattern, square grid pattern was found to be most suitable from the view points of the cell performance and the easiness of the electrode designing. It was found that the fill factor large enough (> 0.79) for the high efficiency can be obtained. A fabricated test cell showed the efficiency of 14.4%. Further improvement (efficiency over 18%) is possibly expected.

Synthesis, characterization, and DFT studies of a new chiral ionic liquid from (S)-1-phenylethylamine

NASA Astrophysics Data System (ADS)

Cui, Shuya; Wang, Tao; Hu, Xiaoli

2014-12-01

A new chiral ionic liquid was synthesized from (S)-1-phenylethylamine and it was studied by IR, Raman, polarimetry, NMR and X-ray crystal diffraction. Its vibrational spectral bands are precisely ascribed to the studied structure with the aid of DFT theoretical calculations. The optimized geometries and calculated vibrational frequencies are evaluated via comparison with experimental values. The vibrational spectral data obtained from IR and Raman spectra are assigned based on the results of the theoretical calculations by the DFT-B3LYP method at 6-311G(d,p) level. The computed vibrational frequencies were scaled by scale factors to yield a good agreement with observed experimental vibrational frequencies. The vibrational modes assignments were performed by using the animation option of GaussView5.0 graphical interface for Gaussian program.

[Determinants of participation among primiparous women in a prenatal education program].

PubMed

Martínez Galiano, Juan Miguel; Delgado Rodríguez, Miguel

2013-01-01

To determine the factors associated with participation in a prenatal education program among primiparous mothers. A multicenter observational study was carried out in four Andalusian hospitals (Spain) in primiparous women in 2010. Sociodemographic characteristics, obstetric history, and previous diseases were collected through an interview and from the clinical charts. Crude and adjusted odds ratios were calculated. The study population consisted of 520 women. According to multivariate analysis, the factors associated with participation in the program were educational level (p <0.001), higher income levels (p <0.001), birth in Spain (p <0.001) and viewing the program as useful (p <0.001). After adjusting for these variables, no other variable was related to participation. The main reason given by women for not attending prenatal education was lack of an invitation to attend. Participation in the prenatal education program was favored by a higher educational level and income, birth in Spain, and viewing the program as useful. Copyright © 2012 SESPAS. Published by Elsevier Espana. All rights reserved.

Randomized Controlled Trial of an Educational Intervention Using an Online Risk Calculator for Knee Osteoarthritis: Effect on Risk Perception.

PubMed

Losina, Elena; Michl, Griffin L; Smith, Karen C; Katz, Jeffrey N

2017-08-01

Young adults, in general, are not aware of their risk of knee osteoarthritis (OA). Understanding risk and risk factors is critical to knee OA prevention. We tested the efficacy of a personalized risk calculator on accuracy of knee OA risk perception and willingness to change behaviors associated with knee OA risk factors. We conducted a randomized controlled trial of 375 subjects recruited using Amazon Mechanical Turk. Subjects were randomized to either use a personalized risk calculator based on demographic and risk-factor information (intervention), or to view general OA risk information (control). At baseline and after the intervention, subjects estimated their 10-year and lifetime risk of knee OA and responded to contemplation ladders measuring willingness to change diet, exercise, or weight-control behaviors. Subjects in both arms had an estimated 3.6% 10-year and 25.3% lifetime chance of developing symptomatic knee OA. Both arms greatly overestimated knee OA risk at baseline, estimating a 10-year risk of 26.1% and a lifetime risk of 47.8%. After the intervention, risk calculator subjects' perceived 10-year risk decreased by 12.9 percentage points to 12.5% and perceived lifetime risk decreased by 19.5 percentage points to 28.1%. Control subjects' perceived risks remained unchanged. Risk calculator subjects were more likely to move to an action stage on the exercise contemplation ladder (relative risk 2.1). There was no difference between the groups for diet or weight-control ladders. The risk calculator is a useful intervention for knee OA education and may motivate some exercise-related behavioral change. © 2016, American College of Rheumatology.

Metabolic risk and television time in adolescent females.

PubMed

Machado-Rodrigues, Aristides M; Leite, Neiva; Coelho-e-Silva, Manuel J; Enes, Fernando; Fernandes, Rômulo; Mascarenhas, Luís P G; Boguszewski, Margaret C S; Malina, Robert M

2015-02-01

A sedentary lifestyle is increasingly implicated in a negative metabolic health profile among youth. The present study examined relationships between clustered metabolic risk factors and TV viewing in female adolescents. The sample comprised 262 girls 14-17 years. Height, weight, fasting glucose, insulin, HDL cholesterol, triglycerides, and blood pressure were measured. Body mass index (BMI) was calculated. TV viewing time and moderate-to-vigorous physical activity (MVPA) were estimated from a 3-day diary. Outcome variables were normalized and expressed as Z scores which were summed into a metabolic risk score. Multiple linear regression analysis was used. TV viewing was independently associated with increased prevalence of clustered metabolic risk in girls after adjustment for several confounders (i.e., chronological age, BMI, MVPA, and parental education). The final model also indicated that lower levels of MVPA, higher BMI, and lower mother education were associated with higher metabolic risk. Increased TV viewing had an adverse effect on metabolic health of adolescent girls. The findings highlight the potential importance of preventive actions to ameliorate metabolic risk in youth which target both sedentary and physically active behaviors.

Differences in Femoral Head Penetration Between Highly Cross-Linked Polyethylene Cemented Sockets and Uncemented Liners.

PubMed

Morita, Daigo; Seki, Taisuke; Higuchi, Yoshitoshi; Takegami, Yasuhiko; Ishiguro, Naoki

2017-12-01

This study aimed at investigating differences in femoral head penetration between highly cross-linked polyethylene (HXLPE) cemented sockets and uncemented liners during 5 years postoperatively. Ninety-six patients (106 hips) with a mean age of 64.4 (range, 35-83) years underwent total hip arthroplasty using a HXLPE cemented socket or liner and were respectively divided into cemented (35 patients [37 hips]) and uncemented (61 patients [69 hips]) groups. Femoral head penetrations were evaluated on both anteroposterior (AP)-view and Lauenstein-view radiographs, and mean polyethylene (PE) wear rates were calculated based on femoral head penetration from 2 to 5 years. Multivariate analyses were performed to assess risk factors for PE wear. At 5 years postoperatively, the cemented and uncemented groups exhibited proximal direction femoral head penetrations of 0.103 mm and 0.124 mm (P = .226) and anterior direction penetrations of 0.090 mm and 0.151 mm (P = .002), respectively. The corresponding mean PE wear rates were 0.004 mm/y and 0.009 mm/y in the AP-view (P = .286) and 0.005 mm/y and 0.012 mm/y in the Lauenstein-view (P = .168), respectively. Left-side operation and high activity were independent risk factors for PE wear on AP-view. When HXLPE was used, all mean PE wear rates were very low and those of cemented sockets and uncemented liners were very similar. PE particle theory suggests that the occurrence of osteolysis and related aseptic loosening might consequently decrease. Copyright © 2017 Elsevier Inc. All rights reserved.

Sun-view angle effects on reflectance factors of corn canopies

NASA Technical Reports Server (NTRS)

Ranson, K. J.; Daughtry, C. S. T.; Biehl, L. L.; Bauer, M. E.

1985-01-01

The effects of sun and view angles on reflectance factors of corn (Zea mays L.) canopies ranging from the six leaf stage to harvest maturity were studied on the Purdue University Agronomy Farm by a multiband radiometer. The two methods of acquiring spectral data, the truck system and the tower systrem, are described. The analysis of the spectral data is presented in three parts: solar angle effects on reflectance factors viewed at nadir; solar angle effects on reflectance factors viewed at a fixed sun angle; and both sun and view angles effect on reflectance factors. The analysis revealed that for nadir-viewed reflectance factors there is a strong solar angle dependence in all spectral bands for canopies with low leaf area index. Reflectance factors observed from the sun angle at different view azimuth angles showed that the position of the sensor relative to the sun is important in determining angular reflectance characteristics. For both sun and view angles, reflectance factors are maximized when the sensor view direction is towards the sun.

Anatomy-based transmission factors for technique optimization in portable chest x-ray

NASA Astrophysics Data System (ADS)

Liptak, Christopher L.; Tovey, Deborah; Segars, William P.; Dong, Frank D.; Li, Xiang

2015-03-01

Portable x-ray examinations often account for a large percentage of all radiographic examinations. Currently, portable examinations do not employ automatic exposure control (AEC). To aid in the design of a size-specific technique chart, acrylic slabs of various thicknesses are often used to estimate x-ray transmission for patients of various body thicknesses. This approach, while simple, does not account for patient anatomy, tissue heterogeneity, and the attenuation properties of the human body. To better account for these factors, in this work, we determined x-ray transmission factors using computational patient models that are anatomically realistic. A Monte Carlo program was developed to model a portable x-ray system. Detailed modeling was done of the x-ray spectrum, detector positioning, collimation, and source-to-detector distance. Simulations were performed using 18 computational patient models from the extended cardiac-torso (XCAT) family (9 males, 9 females; age range: 2-58 years; weight range: 12-117 kg). The ratio of air kerma at the detector with and without a patient model was calculated as the transmission factor. Our study showed that the transmission factor decreased exponentially with increasing patient thickness. For the range of patient thicknesses examined (12-28 cm), the transmission factor ranged from approximately 21% to 1.9% when the air kerma used in the calculation represented an average over the entire imaging field of view. The transmission factor ranged from approximately 21% to 3.6% when the air kerma used in the calculation represented the average signals from two discrete AEC cells behind the lung fields. These exponential relationships may be used to optimize imaging techniques for patients of various body thicknesses to aid in the design of clinical technique charts.

Nightglow emissions of OH/X 2 pi/ - Comparison of theory and measurements in the /9-3/ band

NASA Technical Reports Server (NTRS)

Frederick, J. E.; Rusch, D. W.; Liu, S. C.

1978-01-01

The visible airglow experiments on the Atmosphere Explorer C and E satellites have viewed the (9-3) band nightglow emission of the excited hydroxyl radical in the lower thermosphere at tropical latitudes. The surface brightnesses observed at similar local times vary by approximately a factor of 2. Comparison of the measurements with time-dependent photochemical calculations shows reasonable agreement and indicates that temporal changes in atmospheric transport processes are the most likely explanation of the nightglow variations.

Synthesis, characterization, and DFT studies of a new chiral ionic liquid from (S)-1-phenylethylamine.

PubMed

Cui, Shuya; Wang, Tao; Hu, Xiaoli

2014-12-10

A new chiral ionic liquid was synthesized from (S)-1-phenylethylamine and it was studied by IR, Raman, polarimetry, NMR and X-ray crystal diffraction. Its vibrational spectral bands are precisely ascribed to the studied structure with the aid of DFT theoretical calculations. The optimized geometries and calculated vibrational frequencies are evaluated via comparison with experimental values. The vibrational spectral data obtained from IR and Raman spectra are assigned based on the results of the theoretical calculations by the DFT-B3LYP method at 6-311G(d,p) level. The computed vibrational frequencies were scaled by scale factors to yield a good agreement with observed experimental vibrational frequencies.The vibrational modes assignments were performed by using the animation option of GaussView5.0 graphical interface for Gaussian program. Copyright © 2014 Elsevier B.V. All rights reserved.

Overweight in children and adolescents associated with TV viewing and parental weight: Project HeartBeat!

PubMed

Steffen, Lyn M; Dai, Shifan; Fulton, Janet E; Labarthe, Darwin R

2009-07-01

Parental obesity and TV viewing are risk factors for childhood obesity. This study assessed the association of children's TV viewing and computer use with body mass and examined whether parental weight status modified the association. Cross-sectional associations of parental weight status, hours of TV viewing and computer use, and children's body composition were studied in a subsample of 526 black and nonblack children, aged 8, 11, and 14 years at baseline, enrolled in Project HeartBeat!, a longitudinal study of cardiovascular disease risk factors, 1991-1995. BMI, fat-free mass (FFM), and percent body fat (PBF) were calculated from children's body composition measured at baseline. Children's TV viewing and computer use habits and parental height and weight were self-reported. Multivariate regression analysis was used in assessing inter-relations of parental weight status and child's TV viewing and computer use habits with BMI, FFM, PBF, and risk for overweight status (BMI > or =85th percentile), adjusting for age, gender, race, and Tanner stage. Children of one or two overweight/obese parents watched an average of 22+/-6 minutes or 30+/-11 minutes more TV per day than children of normal-weight parents, respectively (both p<0.01). In multivariate regression analyses, BMI and PBF increased significantly by 0.42 kg/m(2) and 1.14% (both p<0.001), respectively, for each hour of TV watched among children with overweight parents, but not for those with normal-weight parents (p(interaction)<0.05). Similar results were observed for total screen time. These study findings are consistent with a genetic contribution of parental weight; however, overweight/obese parents may also exhibit behavior patterns that negatively influence children's TV viewing and have an impact on child overweight status. The effect of parental BMI on children's BMI may have both a genetic and an environmental linkage.

Application of Entropy Method in River Health Evaluation Based on Aquatic Ecological Function Regionalization

NASA Astrophysics Data System (ADS)

Shi, Yan-ting; Liu, Jie; Wang, Peng; Zhang, Xu-nuo; Wang, Jun-qiang; Guo, Liang

2017-05-01

With the implementation of water environment management in key basins in China, the monitoring and evaluation system of basins are in urgent need of innovation and upgrading. In view of the heavy workload of existing evaluation methods and the cumbersome calculation of multi-factor weighting method, the idea of using entroy method to assess river health based on aquatic ecological function regionalization was put forward. According to the monitoring data of songhua river in the year of 2011-2015, the entropy weight method was used to calculate the weight of 9 evaluation factors of 29 monitoring sections, and the river health assessment was carried out. In the study area, the river health status of the biodiversity conservation function area (4.111 point) was good, the water conservation function area (3.371 point), the habitat maintenance functional area (3.262 point), the agricultural production maintenance functional area (3.695 point) and the urban supporting functional area (3.399 point) was light pollution.

OECD Maximum Residue Limit Calculator

EPA Pesticide Factsheets

With the goal of harmonizing the calculation of maximum residue limits (MRLs) across the Organisation for Economic Cooperation and Development, the OECD has developed an MRL Calculator. View the calculator.

Modeling of a multileaf collimator

NASA Astrophysics Data System (ADS)

Kim, Siyong

A comprehensive physics model of a multileaf collimator (MLC) field for treatment planning was developed. Specifically, an MLC user interface module that includes a geometric optimization tool and a general method of in- air output factor calculation were developed. An automatic tool for optimization of MLC conformation is needed to realize the potential benefits of MLC. It is also necessary that a radiation therapy treatment planning (RTTP) system is capable of modeling MLC completely. An MLC geometric optimization and user interface module was developed. The planning time has been reduced significantly by incorporating the MLC module into the main RTTP system, Radiation Oncology Computer System (ROCS). The dosimetric parameter that has the most profound effect on the accuracy of the dose delivered with an MLC is the change in the in-air output factor that occurs with field shaping. It has been reported that the conventional method of calculating an in-air output factor cannot be used for MLC shaped fields accurately. Therefore, it is necessary to develop algorithms that allow accurate calculation of the in-air output factor. A generalized solution for an in-air output factor calculation was developed. Three major contributors of scatter to the in-air output-flattening filter, wedge, and tertiary collimator-were considered separately. By virtue of a field mapping method, in which a source plane field determined by detector's eye view is mapped into a detector plane field, no additional dosimetric data acquisition other than the standard data set for a range of square fields is required for the calculation of head scatter. Comparisons of in-air output factors between calculated and measured values show a good agreement for both open and wedge fields. For rectangular fields, a simple equivalent square formula was derived based on the configuration of a linear accelerator treatment head. This method predicts in-air output to within 1% accuracy. A two-effective-source algorithm was developed to account for the effect of source to detector distance on in-air output for wedge fields. Two effective sources, one for head scatter and the other for wedge scatter, were dealt with independently. Calculations provided less than 1% difference of in-air output factors from measurements. This approach offers the best comprehensive accuracy in radiation delivery with field shapes defined using MLC. This generalized model works equally well with fields shaped by any type of tertiary collimator and have the necessary framework to extend its application to intensity modulated radiation therapy.

Development of Islamic Spiritual Health Scale (ISHS).

PubMed

Khorashadizadeh, Fatemeh; Heydari, Abbas; Nabavi, Fatemeh Heshmati; Mazlom, Seyed Reza; Ebrahimi, Mahdi; Esmaili, Habibollah

2017-03-01

To develop and psychometrically assess spiritual health scale based on Islamic view in Iran. The cross-sectional study was conducted at Imam Ali and Quem hospitals in Mashhad and Imam Ali and Imam Reza hospitals in Bojnurd, Iran, from 2015 to 2016 In the first stage, an 81-item Likert-type scale was developed using a qualitative approach. The second stage comprised quantitative component. The scale's impact factor, content validity ratio, content validity index, face validity and exploratory factor analysis were calculated. Test-retest and internal consistency was used to examine the reliability of the instrument. Data analysis was done using SPSS 11. Of 81 items in the scale, those with impact factor above 1.5, content validity ratio above 0.62, and content validity index above 0.79 were considered valid and the rest were discarded, resulting in a 61-item scale. Exploratory factor analysis reduced the list of items to 30, which were divided into seven groups with a minimum eigen value of 1 for each factor. But according to scatter plot, attributes of the concept of spiritual health included love to creator, duty-based life, religious rationality, psychological balance, and attention to afterlife. Internal reliability of the scale was calculated by alpha Cronbach coefficient as 0.91. There was solid evidence of the strength factor structure and reliability of the Islamic Spiritual Health Scale which provides a unique way for spiritual health assessment of Muslims.

Adaptive multi-view clustering based on nonnegative matrix factorization and pairwise co-regularization

NASA Astrophysics Data System (ADS)

Zhang, Tianzhen; Wang, Xiumei; Gao, Xinbo

2018-04-01

Nowadays, several datasets are demonstrated by multi-view, which usually include shared and complementary information. Multi-view clustering methods integrate the information of multi-view to obtain better clustering results. Nonnegative matrix factorization has become an essential and popular tool in clustering methods because of its interpretation. However, existing nonnegative matrix factorization based multi-view clustering algorithms do not consider the disagreement between views and neglects the fact that different views will have different contributions to the data distribution. In this paper, we propose a new multi-view clustering method, named adaptive multi-view clustering based on nonnegative matrix factorization and pairwise co-regularization. The proposed algorithm can obtain the parts-based representation of multi-view data by nonnegative matrix factorization. Then, pairwise co-regularization is used to measure the disagreement between views. There is only one parameter to auto learning the weight values according to the contribution of each view to data distribution. Experimental results show that the proposed algorithm outperforms several state-of-the-arts algorithms for multi-view clustering.

S-NPP VIIRS thermal emissive band gain correction during the blackbody warm-up-cool-down cycle

NASA Astrophysics Data System (ADS)

Choi, Taeyoung J.; Cao, Changyong; Weng, Fuzhong

2016-09-01

The Suomi National Polar orbiting Partnership (S-NPP) Visible Infrared Imaging Radiometer Suite (VIIRS) has onboard calibrators called blackbody (BB) and Space View (SV) for Thermal Emissive Band (TEB) radiometric calibration. In normal operation, the BB temperature is set to 292.5 K providing one radiance level. From the NOAA's Integrated Calibration and Validation System (ICVS) monitoring system, the TEB calibration factors (F-factors) have been trended and show very stable responses, however the BB Warm-Up-Cool-Down (WUCD) cycles provide detectors' gain and temperature dependent sensitivity measurements. Since the launch of S-NPP, the NOAA Sea Surface Temperature (SST) group noticed unexpected global SST anomalies during the WUCD cycles. In this study, the TEB Ffactors are calculated during the WUCD cycle on June 17th 2015. The TEB F-factors are analyzed by identifying the VIIRS On-Board Calibrator Intermediate Product (OBCIP) files to be Warm-Up or Cool-Down granules. To correct the SST anomaly, an F-factor correction parameter is calculated by the modified C1 (or b1) values which are derived from the linear portion of C1 coefficient during the WUCD. The F-factor correction factors are applied back to the original VIIRS SST bands showing significantly reducing the F-factor changes. Obvious improvements are observed in M12, M14 and M16, but corrections effects are hardly seen in M16. Further investigation is needed to find out the source of the F-factor oscillations during the WUCD.

How green are the streets? An analysis for central areas of Chinese cities using Tencent Street View

PubMed Central

Liu, Liu

2017-01-01

Extensive evidence has revealed that street greenery, as a quality-of-life component, is important for oxygen production, pollutant absorption, and urban heat island effect mitigation. Determining how green our streets are has always been difficult given the time and money consumed using conventional methods. This study proposes an automatic method using an emerging online street-view service to address this issue. This method was used to analyze street greenery in the central areas (28.3 km2 each) of 245 major Chinese cities; this differs from previous studies, which have investigated small areas in a given city. Such a city-system-level study enabled us to detect potential universal laws governing street greenery as well as the impact factors. We collected over one million Tencent Street View pictures and calculated the green view index for each picture. We found the following rules: (1) longer streets in more economically developed and highly administrated cities tended to be greener; (2) cities in western China tend to have greener streets; and (3) the aggregated green view indices at the municipal level match with the approved National Garden Cities of China. These findings can prove useful for drafting more appropriate policies regarding planning and engineering practices for street greenery. PMID:28196071

How green are the streets? An analysis for central areas of Chinese cities using Tencent Street View.

PubMed

Long, Ying; Liu, Liu

2017-01-01

Extensive evidence has revealed that street greenery, as a quality-of-life component, is important for oxygen production, pollutant absorption, and urban heat island effect mitigation. Determining how green our streets are has always been difficult given the time and money consumed using conventional methods. This study proposes an automatic method using an emerging online street-view service to address this issue. This method was used to analyze street greenery in the central areas (28.3 km2 each) of 245 major Chinese cities; this differs from previous studies, which have investigated small areas in a given city. Such a city-system-level study enabled us to detect potential universal laws governing street greenery as well as the impact factors. We collected over one million Tencent Street View pictures and calculated the green view index for each picture. We found the following rules: (1) longer streets in more economically developed and highly administrated cities tended to be greener; (2) cities in western China tend to have greener streets; and (3) the aggregated green view indices at the municipal level match with the approved National Garden Cities of China. These findings can prove useful for drafting more appropriate policies regarding planning and engineering practices for street greenery.

Design of a Software for Calculating Isoelectric Point of a Polypeptide According to Their Net Charge Using the Graphical Programming Language LabVIEW

ERIC Educational Resources Information Center

Tovar, Glomen

2018-01-01

A software to calculate the net charge and to predict the isoelectric point (pI) of a polypeptide is developed in this work using the graphical programming language LabVIEW. Through this instrument the net charges of the ionizable residues of the chains of the proteins are calculated at different pH values, tabulated, pI is predicted and an Excel…

[Prenatal risk calculation: comparison between Fast Screen pre I plus software and ViewPoint software. Evaluation of the risk calculation algorithms].

PubMed

Morin, Jean-François; Botton, Eléonore; Jacquemard, François; Richard-Gireme, Anouk

2013-01-01

The Fetal medicine foundation (FMF) has developed a new algorithm called Prenatal Risk Calculation (PRC) to evaluate Down syndrome screening based on free hCGβ, PAPP-A and nuchal translucency. The peculiarity of this algorithm is to use the degree of extremeness (DoE) instead of the multiple of the median (MoM). The biologists measuring maternal seric markers on Kryptor™ machines (Thermo Fisher Scientific) use Fast Screen pre I plus software for the prenatal risk calculation. This software integrates the PRC algorithm. Our study evaluates the data of 2.092 patient files of which 19 show a fœtal abnormality. These files have been first evaluated with the ViewPoint software based on MoM. The link between DoE and MoM has been analyzed and the different calculated risks compared. The study shows that Fast Screen pre I plus software gives the same risk results as ViewPoint software, but yields significantly fewer false positive results.

An approach to the design of wide-angle optical systems with special illumination and IFOV requirements

NASA Astrophysics Data System (ADS)

Pravdivtsev, Andrey V.

2012-06-01

The article presents the approach to the design wide-angle optical systems with special illumination and instantaneous field of view (IFOV) requirements. The unevenness of illumination reduces the dynamic range of the system, which negatively influence on the system ability to perform their task. The result illumination on the detector depends among other factors from the IFOV changes. It is also necessary to consider IFOV in the synthesis of data processing algorithms, as it directly affects to the potential "signal/background" ratio for the case of statistically homogeneous backgrounds. A numerical-analytical approach that simplifies the design of wideangle optical systems with special illumination and IFOV requirements is presented. The solution can be used for optical systems which field of view greater than 180 degrees. Illumination calculation in optical CAD is based on computationally expensive tracing of large number of rays. The author proposes to use analytical expression for some characteristics which illumination depends on. The rest characteristic are determined numerically in calculation with less computationally expensive operands, the calculation performs not every optimization step. The results of analytical calculation inserts in the merit function of optical CAD optimizer. As a result we reduce the optimizer load, since using less computationally expensive operands. It allows reducing time and resources required to develop a system with the desired characteristics. The proposed approach simplifies the creation and understanding of the requirements for the quality of the optical system, reduces the time and resources required to develop an optical system, and allows creating more efficient EOS.

Calculation of the overlap factor for scanning LiDAR based on the tridimensional ray-tracing method.

PubMed

Chen, Ruiqiang; Jiang, Yuesong; Wen, Luhong; Wen, Donghai

2017-06-01

The overlap factor is used to evaluate the LiDAR light collection ability. Ranging LiDAR is mainly determined by the optical configuration. However, scanning LiDAR, equipped with a scanning mechanism to acquire a 3D coordinate points cloud for a specified target, is essential in considering the scanning effect at the same time. Otherwise, scanning LiDAR will reduce the light collection ability and even cannot receive any echo. From this point of view, we propose a scanning LiDAR overlap factor calculation method based on the tridimensional ray-tracing method, which can be applied to scanning LiDAR with any special laser intensity distribution, any type of telescope (reflector, refractor, or mixed), and any shape obstruction (i.e., the reflector of a coaxial optical system). A case study for our LiDAR with a scanning mirror is carried out, and a MATLAB program is written to analyze the laser emission and reception process. Sensitivity analysis is carried out as a function of scanning mirror rotation speed and detector position, and the results guide how to optimize the overlap factor for our LiDAR. The results of this research will have a guiding significance in scanning LiDAR design and assembly.

The joined wing - An overview. [aircraft tandem wings in diamond configurations

NASA Technical Reports Server (NTRS)

Wolkovitch, J.

1985-01-01

The joined wing is a new type of aircraft configuration which employs tandem wings arranged to form diamond shapes in plan view and front view. Wind-tunnel tests and finite-element structural analyses have shown that the joined wing provides the following advantages over a comparable wing-plus-tail system; lighter weight and higher stiffness, higher span-efficiency factor, higher trimmed maximum lift coefficient, lower wave drag, plus built-in direct lift and direct sideforce control capability. A summary is given of research performed on the joined wing. Calculated joined wing weights are correlated with geometric parameters to provide simple weight estimation methods. The results of low-speed and transonic wind-tunnel tests are summarized, and guidelines for design of joined-wing aircraft are given. Some example joined-wing designs are presented and related configurations having connected wings are reviewed.

Dual energy CT with one full scan and a second sparse-view scan using structure preserving iterative reconstruction (SPIR)

NASA Astrophysics Data System (ADS)

Wang, Tonghe; Zhu, Lei

2016-09-01

Conventional dual-energy CT (DECT) reconstruction requires two full-size projection datasets with two different energy spectra. In this study, we propose an iterative algorithm to enable a new data acquisition scheme which requires one full scan and a second sparse-view scan for potential reduction in imaging dose and engineering cost of DECT. A bilateral filter is calculated as a similarity matrix from the first full-scan CT image to quantify the similarity between any two pixels, which is assumed unchanged on a second CT image since DECT scans are performed on the same object. The second CT image from reduced projections is reconstructed by an iterative algorithm which updates the image by minimizing the total variation of the difference between the image and its filtered image by the similarity matrix under data fidelity constraint. As the redundant structural information of the two CT images is contained in the similarity matrix for CT reconstruction, we refer to the algorithm as structure preserving iterative reconstruction (SPIR). The proposed method is evaluated on both digital and physical phantoms, and is compared with the filtered-backprojection (FBP) method, the conventional total-variation-regularization-based algorithm (TVR) and prior-image-constrained-compressed-sensing (PICCS). SPIR with a second 10-view scan reduces the image noise STD by a factor of one order of magnitude with same spatial resolution as full-view FBP image. SPIR substantially improves over TVR on the reconstruction accuracy of a 10-view scan by decreasing the reconstruction error from 6.18% to 1.33%, and outperforms TVR at 50 and 20-view scans on spatial resolution with a higher frequency at the modulation transfer function value of 10% by an average factor of 4. Compared with the 20-view scan PICCS result, the SPIR image has 7 times lower noise STD with similar spatial resolution. The electron density map obtained from the SPIR-based DECT images with a second 10-view scan has an average error of less than 1%.

Nutrition Label Viewing during a Food-Selection Task: Front-of-Package Labels vs Nutrition Facts Labels.

PubMed

Graham, Dan J; Heidrick, Charles; Hodgin, Katie

2015-10-01

Earlier research has identified consumer characteristics associated with viewing Nutrition Facts labels; however, little is known about those who view front-of-package nutrition labels. Front-of-package nutrition labels might appeal to more consumers than do Nutrition Facts labels, but it might be necessary to provide consumers with information about how to locate and use these labels. This study quantifies Nutrition Facts and front-of-package nutrition label viewing among American adult consumers. Attention to nutrition information was measured during a food-selection task. One hundred and twenty-three parents (mean age=38 years, mean body mass index [calculated as kg/m(2)]=28) and one of their children (aged 6 to 9 years) selected six foods from a university laboratory-turned-grocery aisle. Participants were randomized to conditions in which front-of-package nutrition labels were present or absent, and signage explaining front-of-package nutrition labels was present or absent. Adults' visual attention to Nutrition Facts labels and front-of-package nutrition labels was objectively measured via eye-tracking glasses. To examine whether there were significant differences in the percentages of participants who viewed Nutrition Facts labels vs front-of-package nutrition labels, McNemar's tests were conducted across all participants, as well as within various sociodemographic categories. To determine whether hypothesized factors, such as health literacy and education, had stronger relationships with front-of-package nutrition label vs Nutrition Facts label viewing, linear regression assessed the magnitude of relationships between theoretically and empirically derived factors and each type of label viewing. Overall, front-of-package nutrition labels were more likely to be viewed than Nutrition Facts labels; however, for all subgroups, higher rates of front-of-package nutrition label viewership occurred only when signage was present drawing attention to the presence and meaning of front-of-package nutrition labels. Consumers should receive education about the availability and use of new nutrition labels. Copyright © 2015 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

An analytically based numerical method for computing view factors in real urban environments

NASA Astrophysics Data System (ADS)

Lee, Doo-Il; Woo, Ju-Wan; Lee, Sang-Hyun

2018-01-01

A view factor is an important morphological parameter used in parameterizing in-canyon radiative energy exchange process as well as in characterizing local climate over urban environments. For realistic representation of the in-canyon radiative processes, a complete set of view factors at the horizontal and vertical surfaces of urban facets is required. Various analytical and numerical methods have been suggested to determine the view factors for urban environments, but most of the methods provide only sky-view factor at the ground level of a specific location or assume simplified morphology of complex urban environments. In this study, a numerical method that can determine the sky-view factors ( ψ ga and ψ wa ) and wall-view factors ( ψ gw and ψ ww ) at the horizontal and vertical surfaces is presented for application to real urban morphology, which are derived from an analytical formulation of the view factor between two blackbody surfaces of arbitrary geometry. The established numerical method is validated against the analytical sky-view factor estimation for ideal street canyon geometries, showing a consolidate confidence in accuracy with errors of less than 0.2 %. Using a three-dimensional building database, the numerical method is also demonstrated to be applicable in determining the sky-view factors at the horizontal (roofs and roads) and vertical (walls) surfaces in real urban environments. The results suggest that the analytically based numerical method can be used for the radiative process parameterization of urban numerical models as well as for the characterization of local urban climate.

Bias correction for rainrate retrievals from satellite passive microwave sensors

NASA Technical Reports Server (NTRS)

Short, David A.

1990-01-01

Rainrates retrieved from past and present satellite-borne microwave sensors are affected by a fundamental remote sensing problem. Sensor fields-of-view are typically large enough to encompass substantial rainrate variability, whereas the retrieval algorithms, based on radiative transfer calculations, show a non-linear relationship between rainrate and microwave brightness temperature. Retrieved rainrates are systematically too low. A statistical model of the bias problem shows that bias correction factors depend on the probability distribution of instantaneous rainrate and on the average thickness of the rain layer.

Evaluation and cross-comparison of vegetation indices for crop monitoring from sentinel-2 and worldview-2 images

NASA Astrophysics Data System (ADS)

Psomiadis, Emmanouil; Dercas, Nicholas; Dalezios, Nicolas R.; Spyropoulos, Nikolaos V.

2017-10-01

Farmers throughout the world are constantly searching for ways to maximize their returns. Remote Sensing applications are designed to provide farmers with timely crop monitoring and production information. Such information can be used to identify crop vigor problems. Vegetation indices (VIs) derived from satellite data have been widely used to assess variations in the physiological state and biophysical properties of vegetation. However, due to the various sensor characteristics, there are differences among VIs derived from multiple sensors for the same target. Therefore, multi-sensor VI capability and effectiveness are critical but complicated issues in the application of multi-sensor vegetation observations. Various factors such as the atmospheric conditions during acquisition, sensor and geometric characteristics, such as viewing angle, field of view, and sun elevation influence direct comparability of vegetation indicators among different sensors. In the present study, two experimental areas were used which are located near the villages Nea Lefki and Melia of Larissa Prefecture in Thessaly Plain area, containing a wheat and a cotton crop, respectively. Two satellite systems with different spatial resolution, WorldView-2 (W2) and Sentinel-2 (S2) with 2 and 10 meters pixel size, were used. Normalized Difference Vegetation Index (NDVI) and Leaf Area Index (LAI) were calculated and a statistical comparison of the VIs was made to designate their correlation and dependency. Finally, several other innovative indices were calculated and compared to evaluate their effectiveness in the detection of problematic plant growth areas.

DDD: Dynamic Database for Diatomics

NASA Technical Reports Server (NTRS)

Schwenke, David

2004-01-01

We have developed as web-based database containing spectra of diatomic moiecuies. All data is computed from first principles, and if a user requests data for a molecule/ion that is not in the database, new calculations are automatically carried out on that species. Rotational, vibrational, and electronic transitions are included. Different levels of accuracy can be selected from qualitatively correct to the best calculations that can be carried out. The user can view and modify spectroscopic constants, view potential energy curves, download detailed high temperature linelists, or view synthetic spectra.

Quantifying Environmental Effects on the Decay of Hole Transfer Couplings in Biosystems.

PubMed

Ramos, Pablo; Pavanello, Michele

2014-06-10

In the past two decades, many research groups worldwide have tried to understand and categorize simple regimes in the charge transfer of such biological systems as DNA. Theoretically speaking, the lack of exact theories for electron-nuclear dynamics on one side and poor quality of the parameters needed by model Hamiltonians and nonadiabatic dynamics alike (such as couplings and site energies) on the other are the two main difficulties for an appropriate description of the charge transfer phenomena. In this work, we present an application of a previously benchmarked and linear-scaling subsystem density functional theory (DFT) method for the calculation of couplings, site energies, and superexchange decay factors (β) of several biological donor-acceptor dyads, as well as double stranded DNA oligomers composed of up to five base pairs. The calculations are all-electron and provide a clear view of the role of the environment on superexchange couplings in DNA-they follow experimental trends and confirm previous semiempirical calculations. The subsystem DFT method is proven to be an excellent tool for long-range, bridge-mediated coupling and site energy calculations of embedded molecular systems.

Fundamental Physics with Electroweak Probes of Nuclei

NASA Astrophysics Data System (ADS)

Pastore, Saori

2018-02-01

The past decade has witnessed tremendous progress in the theoretical and computational tools that produce our understanding of nuclei. A number of microscopic calculations of nuclear electroweak structure and reactions have successfully explained the available experimental data, yielding a complex picture of the way nuclei interact with electroweak probes. This achievement is of great interest from the pure nuclear-physics point of view. But it is of much broader interest too, because the level of accuracy and confidence reached by these calculations opens up the concrete possibility of using nuclei to address open questions in other sub-fields of physics, such as, understanding the fundamental properties of neutrinos, or the particle nature of dark matter. In this talk, I will review recent progress in microscopic calculations of electroweak properties of light nuclei, including electromagnetic moments, form factors and transitions in between lowlying nuclear states along with preliminary studies for single- and double-beta decay rates. I will illustrate the key dynamical features required to explain the available experimental data, and, if time permits, present a novel framework to calculate neutrino-nucleus cross sections for A > 12 nuclei.

Characterization of cross-section correction to charge exchange recombination spectroscopy rotation measurements using co- and counter-neutral-beam views.

PubMed

Solomon, W M; Burrell, K H; Feder, R; Nagy, A; Gohil, P; Groebner, R J

2008-10-01

Measurements of rotation using charge exchange recombination spectroscopy can be affected by the energy dependence of the charge exchange cross section. On DIII-D, the associated correction to the rotation can exceed 100 kms at high temperatures. In reactor-relevant low rotation conditions, the correction can be several times larger than the actual plasma rotation and therefore must be carefully validated. New chords have been added to the DIII-D CER diagnostic to view the counter-neutral-beam line. The addition of these views allows determination of the toroidal rotation without depending on detailed atomic physics calculations, while also allowing experimental characterization of the atomic physics. A database of rotation comparisons from the two views shows that the calculated cross-section correction can adequately describe the measurements, although there is a tendency for "overcorrection." In cases where accuracy better than about 15% is desired, relying on calculation of the cross-section correction may be insufficient.

The calculating eye: Baily, Herschel, Babbage and the business of astronomy

NASA Astrophysics Data System (ADS)

Ashworth, William J.

1994-12-01

Astronomy does not often appear in the socio-political and economic history of nineteenth-century Britain. Whereas contemporary literature, poetry and the visual arts made significant reference to the heavens, the more earthbound arena of finance seems an improbable place to encounter astronomical themes. This paper shows that astronomical practice was an important factor in the emergence of what can be described as an accountant's view of the world. I begin by exploring the senses of the term 'calculation' in Regency England, and then seek to reveal how the dramatic growth of vigilance in science, the organization and control of labour, and the monitoring of society and the economy drew upon and informed this disciplined numerical technique. Observations in all these areas could only be trusted if correctly reduced through a single system of calculation assisted by a group of standardized tables and division of mental labour. Within this setting the stellar economy provided an object that was seemingly ordered and law-like and therefore predictable through a powerful combination of techniques.

Failure probability under parameter uncertainty.

PubMed

Gerrard, R; Tsanakas, A

2011-05-01

In many problems of risk analysis, failure is equivalent to the event of a random risk factor exceeding a given threshold. Failure probabilities can be controlled if a decisionmaker is able to set the threshold at an appropriate level. This abstract situation applies, for example, to environmental risks with infrastructure controls; to supply chain risks with inventory controls; and to insurance solvency risks with capital controls. However, uncertainty around the distribution of the risk factor implies that parameter error will be present and the measures taken to control failure probabilities may not be effective. We show that parameter uncertainty increases the probability (understood as expected frequency) of failures. For a large class of loss distributions, arising from increasing transformations of location-scale families (including the log-normal, Weibull, and Pareto distributions), the article shows that failure probabilities can be exactly calculated, as they are independent of the true (but unknown) parameters. Hence it is possible to obtain an explicit measure of the effect of parameter uncertainty on failure probability. Failure probability can be controlled in two different ways: (1) by reducing the nominal required failure probability, depending on the size of the available data set, and (2) by modifying of the distribution itself that is used to calculate the risk control. Approach (1) corresponds to a frequentist/regulatory view of probability, while approach (2) is consistent with a Bayesian/personalistic view. We furthermore show that the two approaches are consistent in achieving the required failure probability. Finally, we briefly discuss the effects of data pooling and its systemic risk implications. © 2010 Society for Risk Analysis.

DFT calculation and vibrational spectroscopic studies of 2-(tert-butoxycarbonyl (Boc) -amino)-5-bromopyridine

NASA Astrophysics Data System (ADS)

Premkumar, S.; Jawahar, A.; Mathavan, T.; Kumara Dhas, M.; Sathe, V. G.; Milton Franklin Benial, A.

2014-08-01

The molecular structure of 2-(tert-butoxycarbonyl (Boc) -amino)-5-bromopyridine (BABP) was optimized by the DFT/B3LYP method with 6-311G (d,p), 6-311++G (d,p) and cc-pVTZ basis sets using the Gaussian 09 program. The most stable optimized structure of the molecule was predicted by the DFT/B3LYP method with cc-pVTZ basis set. The vibrational frequencies, Mulliken atomic charge distribution, frontier molecular orbitals and thermodynamical parameters were calculated. These calculations were done at the ground state energy level of BABP without applying any constraint on the potential energy surface. The vibrational spectra were experimentally recorded using Fourier Transform-Infrared (FT-IR) and micro-Raman spectrometer. The computed vibrational frequencies were scaled by scale factors to yield a good agreement with observed experimental vibrational frequencies. The complete theoretically calculated and experimentally observed vibrational frequencies were assigned on the basis of Potential Energy Distribution (PED) calculation using the VEDA 4.0 program. The vibrational modes assignments were performed by using the animation option of GaussView 05 graphical interface for Gaussian program. The Mulliken atomic charge distribution was calculated for BABP molecule. The molecular reactivity and stability of BABP were also studied by frontier molecular orbitals (FMOs) analysis.

[Review of lime carbon sink.

PubMed

Liu, Li Li; Ling, Jiang Hua; Tie, Li; Wang, Jiao Yue; Bing, Long Fei; Xi, Feng Ming

2018-01-01

Under the background of "missing carbon sink" mystery and carbon capture and storage (CCS) technology development, this paper summarized the lime material flow process carbon sink from the lime carbonation principles, impact factors, and lime utilization categories in chemical industry, metallurgy industry, construction industry, and lime kiln ash treatment. The results showed that the lime carbonation rate coefficients were mainly impacted by materials and ambient conditions; the lime carbon sink was mainly in chemical, metallurgy, and construction industries; and current researches focused on the mechanisms and impact factors for carbonation, but their carbon sequestration calculation methods had not been proposed. Therefore, future research should focus on following aspects: to establish a complete system of lime carbon sequestration accounting method in view of material flow; to calculate lime carbon sequestration in both China and the world and explain their offset proportion of CO 2 emission from lime industrial process; to analyze the contribution of lime carbon sequestration to missing carbon sink for clarifying part of missing carbon sinks; to promote the development of carbon capture and storage technology and provide some scientific bases for China's international negotiations on climate change.

Risk analysis of gravity dam instability using credibility theory Monte Carlo simulation model.

PubMed

Xin, Cao; Chongshi, Gu

2016-01-01

Risk analysis of gravity dam stability involves complicated uncertainty in many design parameters and measured data. Stability failure risk ratio described jointly by probability and possibility has deficiency in characterization of influence of fuzzy factors and representation of the likelihood of risk occurrence in practical engineering. In this article, credibility theory is applied into stability failure risk analysis of gravity dam. Stability of gravity dam is viewed as a hybrid event considering both fuzziness and randomness of failure criterion, design parameters and measured data. Credibility distribution function is conducted as a novel way to represent uncertainty of influence factors of gravity dam stability. And combining with Monte Carlo simulation, corresponding calculation method and procedure are proposed. Based on a dam section, a detailed application of the modeling approach on risk calculation of both dam foundation and double sliding surfaces is provided. The results show that, the present method is feasible to be applied on analysis of stability failure risk for gravity dams. The risk assessment obtained can reflect influence of both sorts of uncertainty, and is suitable as an index value.

The normalization of solar X-ray data from many experiments.

NASA Technical Reports Server (NTRS)

Wende, C. D.

1972-01-01

A conversion factor is used to convert Geiger (GM) tube count rates or ion chamber currents into units of the incident X-ray energy flux in a specified passband. A method is described which varies the passband to optimize these conversion factors such that they are relatively independent of the spectrum of the incident photons. This method was applied to GM tubes flown on Explorers 33 and 35 and Mariner 5 and to ion chambers flown on OSO 3 and OGO 4. Revised conversion factors and passbands are presented, and the resulting absolute solar X-ray fluxes based on these are shown to improve the agreement between the various experiments. Calculations have shown that, although the GM tubes on Explorer 33 viewed the Sun off-axis, the effective passband did not change appreciably, and the simple normalization of the count rates to the count rates of a similar GM tube on Explorer 35 was justified.

Conductivity predictions for the 5/2 fractional quantum Hall state using the composite fermion superconductor model

NASA Astrophysics Data System (ADS)

Foster, Kerwin Crayton

The fractional quantum Hall effect (FQHE) occurs when a two-dimensional electron gas is placed in a strong magnetic field at low temperatures. When this effect occurs the Hall resistance, RH, defined to be the Hall voltage divided by the current, is quantized, with RH = (1/nu)h/ e2 where nu = p/q is the Landau level filling fraction; and p and q are relatively prime integers. For almost all observed FQHE states, q is odd with one notable exception: the nu = 5/2 FQHE state. Understanding the nature of this incompressible even-denominator state is one of the central questions in the theory of the FQHE and is the subject of this Dissertation. We use a powerful theoretical tool for studying the FQHE: composite fermion theory. Composite fermions can be viewed as electrons bound to an even number of magnetic flux quanta. Jain has shown that the FQHE for electrons can be viewed as an integer quantum Hall effect (p = 1) for composite fermions. More recently, Halperin, Lee and Read developed a successful theory of the compressible nu = 1/2 state using composite fermions. There is now compelling theoretical evidence that the 5/2 state is a so-called Moore-Read state---a state which can be viewed as a spin-polarized p-wave superconductor of composite fermions. We have developed a semi-phenomenological description of this state by modifying the Halperin-Lee-Read theory, adding a p-wave pairing interaction between composite fermions by hand. The electromagnetic response functions for the resulting superconducting state of composite fermions are then calculated. We show that these response functions exhibit the expected BCS 'coherence factor' effects, such as the Hebel-Slichter peak. Using the composite fermion response functions, we then calculate the corresponding electronic response functions using Chern-Simons theory. We find that in the electronic response, the most striking coherence factor effects (e.g., the Hebel-Slichter peak) are strongly suppressed. However, the low-temperature o = 2Delta threshold behavior does show clear coherence factor effects. Finally, we use our model to predict the wave-vector and frequency dependence of the longitudinal conductivity, sigmaxx( q, o), which can be measured in surface-acoustic-wave propagation experiments.

An analysis of the ArcCHECK-MR diode array's performance for ViewRay quality assurance.

PubMed

Ellefson, Steven T; Culberson, Wesley S; Bednarz, Bryan P; DeWerd, Larry A; Bayouth, John E

2017-07-01

The ArcCHECK-MR diode array utilizes a correction system with a virtual inclinometer to correct the angular response dependencies of the diodes. However, this correction system cannot be applied to measurements on the ViewRay MR-IGRT system due to the virtual inclinometer's incompatibility with the ViewRay's multiple simultaneous beams. Additionally, the ArcCHECK's current correction factors were determined without magnetic field effects taken into account. In the course of performing ViewRay IMRT quality assurance with the ArcCHECK, measurements were observed to be consistently higher than the ViewRay TPS predictions. The goals of this study were to quantify the observed discrepancies and test whether applying the current factors improves the ArcCHECK's accuracy for measurements on the ViewRay. Gamma and frequency analysis were performed on 19 ViewRay patient plans. Ion chamber measurements were performed at a subset of diode locations using a PMMA phantom with the same dimensions as the ArcCHECK. A new method for applying directionally dependent factors utilizing beam information from the ViewRay TPS was developed in order to analyze the current ArcCHECK correction factors. To test the current factors, nine ViewRay plans were altered to be delivered with only a single simultaneous beam and were measured with the ArcCHECK. The current correction factors were applied using both the new and current methods. The new method was also used to apply corrections to the original 19 ViewRay plans. It was found the ArcCHECK systematically reports doses higher than those actually delivered by the ViewRay. Application of the current correction factors by either method did not consistently improve measurement accuracy. As dose deposition and diode response have both been shown to change under the influence of a magnetic field, it can be concluded the current ArcCHECK correction factors are invalid and/or inadequate to correct measurements on the ViewRay system. © 2017 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

An emission inventory of livestock-related bioaerosols for Lower Saxony, Germany

NASA Astrophysics Data System (ADS)

Seedorf, Jens

Detailed livestock-related emission inventories are now available for gases but not for bioaerosols, which are emitted in significant amounts and in varying compositions. In view of the environmental importance of bioaerosols, a model for their calculation is proposed here. The basic formula multiplies emission factors by the number of farm animals, but the model is extended by a factor which considers provisionally the influence of production cycles of various types of livestock on the estimated emissions. Despite several uncertainty factors, emissions factors are calculated for dust (inhalable, respirable), endotoxins (inhalable, respirable) and microorganisms (total mesophilic bacteria, Enterobacteriaceae, fungi) from ventilated livestock buildings. The calculation model and the emission factors are the basis for a simple geographical information system designed to display the calculated emission potencies of livestock-related bioaerosols for the year 1999 in the 46 districts and autonomous cities in Lower Saxony, Germany. The three highest emissions of inhalable dust were determined for the three animal-dense districts of Grafschaft Bentheim (485.3 kg a -1 km -2), Cloppenburg (648.8 kg a -1 km -2) and Vechta (1203.4 kg a -1 km -2). On the other hand, the lowest bioaerosol emissions were found for the cities of Salzgitter (9.6 kg a -1 km -2), Braunschweig (10.6 kg a -1 km -2) and Wolfenbüttel (12.2 kg a -1 km -2) due to their more urban, non-agricultural setting. With the aid of the agricultural census data, the percentages of temporal emission variations were assessed between 1996 and 1999, and found to have changed distinctly due to fluctuations in animal numbers in the districts. The following changes were noted in the three districts with the greatest increase or decrease of emitted particulate matter from 1996 to 1999: more inhalable dust was emitted in the rural districts of Stade (+9.6%), Cloppenburg (+14.9%) and Emsland (+18.2%), while there were clear declines in Oldenburg City (-24.1%), the district Helmstedt (-15.1%) and Braunschweig City (-14.4%).

Correlates of socio-economic inequalities in women's television viewing: a study of intrapersonal, social and environmental mediators.

PubMed

Teychenne, Megan; Ball, Kylie; Salmon, Jo

2012-01-20

Socio-economically disadvantaged women are at a greater risk of spending excess time engaged in television viewing, a behavior linked to several adverse health outcomes. However, the factors which explain socio-economic differences in television viewing are unknown. This study aimed to investigate the contribution of intrapersonal, social and environmental factors to mediating socio-economic (educational) inequalities in women's television viewing. Cross-sectional data were provided by 1,554 women (aged 18-65) who participated in the 'Socio-economic Status and Activity in Women study' of 2004. Based on an ecological framework, women self-reported their socio-economic position (highest education level), television viewing, as well as a number of potential intrapersonal (enjoyment of television viewing, preference for leisure-time sedentary behavior, depression, stress, weight status), social (social participation, interpersonal trust, social cohesion, social support for physical activity from friends and from family) and physical activity environmental factors (safety, aesthetics, distance to places of interest, and distance to physical activity facilities). Multiple mediating analyses showed that two intrapersonal factors (enjoyment of television viewing and weight status) and two social factors (social cohesion and social support from friends for physical activity) partly explained the educational inequalities in women's television viewing. No physical activity environmental factors mediated educational variations in television viewing. Acknowledging the cross-sectional nature of this study, these findings suggest that health promotion interventions aimed at reducing educational inequalities in television viewing should focus on intrapersonal and social strategies, particularly providing enjoyable alternatives to television viewing, weight-loss/management information, increasing social cohesion in the neighborhood and promoting friend support for activity.

Thermal radiation view factor: Methods, accuracy and computer-aided procedures

NASA Technical Reports Server (NTRS)

Kadaba, P. V.

1982-01-01

The computer aided thermal analysis programs which predicts the result of predetermined acceptable temperature range prior to stationing of these orbiting equipment in various attitudes with respect to the Sun and the Earth was examined. Complexity of the surface geometries suggests the use of numerical schemes for the determination of these viewfactors. Basic definitions and standard methods which form the basis for various digital computer methods and various numerical methods are presented. The physical model and the mathematical methods on which a number of available programs are built are summarized. The strength and the weaknesses of the methods employed, the accuracy of the calculations and the time required for computations are evaluated. The situations where accuracies are important for energy calculations are identified and methods to save computational times are proposed. Guide to best use of the available programs at several centers and the future choices for efficient use of digital computers are included in the recommendations.

Characterization of relief printing

NASA Astrophysics Data System (ADS)

Liu, Xing; Chen, Lin; Ortiz-Segovia, Maria-Valezzka; Ferwerda, James; Allebach, Jan

2014-03-01

Relief printing technology developed by Océ allows the superposition of several layers of colorant on different types of media which creates a variation of the surface height defined by the input to the printer. Evaluating the reproduction accuracy of distinct surface characteristics is of great importance to the application of the relief printing system. Therefore, it is necessary to develop quality metrics to evaluate the relief process. In this paper, we focus on the third dimension of relief printing, i.e. height information. To achieve this goal, we define metrics and develop models that aim to evaluate relief prints in two aspects: overall fidelity and surface finish. To characterize the overall fidelity, three metrics are calculated: Modulation Transfer Function (MTF), difference and root-mean-squared error (RMSE) between the input height map and scanned height map, and print surface angle accuracy. For the surface finish property, we measure the surface roughness, generate surface normal maps and develop a light reflection model that serves as a simulation of the differences between ideal prints and real prints that may be perceived by human observers. Three sets of test targets are designed and printed by the Océ relief printer prototypes for the calculation of the above metrics: (i) twisted target, (ii) sinusoidal wave target, and (iii) ramp target. The results provide quantitative evaluations of the printing quality in the third dimension, and demonstrate that the height of relief prints is reproduced accurately with respect to the input design. The factors that affect the printing quality include: printing direction, frequency and amplitude of the input signal, shape of relief prints. Besides the above factors, there are two additional aspects that influence the viewing experience of relief prints: lighting condition and viewing angle.

Developing of the database of meteorological and radiation fields for Moscow region (urban reanalysis) for 1981-2014 period with high spatial and temporal resolution. Strategy and first results.

NASA Astrophysics Data System (ADS)

Konstantinov, Pavel; Varentsov, Mikhail; Platonov, Vladimir; Samsonov, Timofey; Zhdanova, Ekaterina; Chubarova, Natalia

2017-04-01

The main goal of this investigation is to develop a kind of "urban reanalysis" - the database of meteorological and radiation fields under Moscow megalopolis for period 1981-2014 with high spatial resolution. Main meteorological fields for Moscow region are reproduced with COSMO_CLM regional model (including urban parameters) with horizontal resolution 1x1 km. Time resolution of output fields is 1 hour. For radiation fields is quite useful to calculate SVF (Sky View Factor) for obtaining losses of UV radiation in complex urban conditions. Usually, the raster-based SVF analysis the shadow-casting algorithm proposed by Richens (1997) is popular (see Ratti and Richens 2004, Gal et al. 2008, for example). SVF image is obtained by combining shadow images obtained from different directions. An alternative is to use raster-based SVF calculation similar to vector approach using digital elevation model of urban relief. Output radiation field includes UV-radiation with horizontal resolution 1x1 km This study was financially supported by the Russian Foundation for Basic Research within the framework of the scientific project no. 15-35-21129 _mol_a_ved and project no 15-35-70006 mol_a_mos References: 1. Gal, T., Lindberg, F., and Unger, J., 2008. Computing continuous sky view factors using 3D urban raster and vector databases: comparison and application to urban climate. Theoretical and applied climatology, 95 (1-2), 111-123. 2. Richens, P., 1997. Image processing for urban scale environmental modelling. In: J.D. Spitler and J.L.M. Hensen, eds. th Intemational IBPSA Conference Building Simulation, Prague. 3. Ratti, C. and Richens, P., 2004. Raster analysis of urban form. Environment and Planning B: Planning and Design, 31 (2), 297-309.

DFT calculation and vibrational spectroscopic studies of 2-(tert-butoxycarbonyl (Boc) -amino)-5-bromopyridine.

PubMed

Premkumar, S; Jawahar, A; Mathavan, T; Kumara Dhas, M; Sathe, V G; Milton Franklin Benial, A

2014-08-14

The molecular structure of 2-(tert-butoxycarbonyl (Boc) -amino)-5-bromopyridine (BABP) was optimized by the DFT/B3LYP method with 6-311G (d,p), 6-311++G (d,p) and cc-pVTZ basis sets using the Gaussian 09 program. The most stable optimized structure of the molecule was predicted by the DFT/B3LYP method with cc-pVTZ basis set. The vibrational frequencies, Mulliken atomic charge distribution, frontier molecular orbitals and thermodynamical parameters were calculated. These calculations were done at the ground state energy level of BABP without applying any constraint on the potential energy surface. The vibrational spectra were experimentally recorded using Fourier Transform-Infrared (FT-IR) and micro-Raman spectrometer. The computed vibrational frequencies were scaled by scale factors to yield a good agreement with observed experimental vibrational frequencies. The complete theoretically calculated and experimentally observed vibrational frequencies were assigned on the basis of Potential Energy Distribution (PED) calculation using the VEDA 4.0 program. The vibrational modes assignments were performed by using the animation option of GaussView 05 graphical interface for Gaussian program. The Mulliken atomic charge distribution was calculated for BABP molecule. The molecular reactivity and stability of BABP were also studied by frontier molecular orbitals (FMOs) analysis. Copyright © 2014 Elsevier B.V. All rights reserved.

A flexible new method for 3D measurement based on multi-view image sequences

NASA Astrophysics Data System (ADS)

Cui, Haihua; Zhao, Zhimin; Cheng, Xiaosheng; Guo, Changye; Jia, Huayu

2016-11-01

Three-dimensional measurement is the base part for reverse engineering. The paper developed a new flexible and fast optical measurement method based on multi-view geometry theory. At first, feature points are detected and matched with improved SIFT algorithm. The Hellinger Kernel is used to estimate the histogram distance instead of traditional Euclidean distance, which is immunity to the weak texture image; then a new filter three-principle for filtering the calculation of essential matrix is designed, the essential matrix is calculated using the improved a Contrario Ransac filter method. One view point cloud is constructed accurately with two view images; after this, the overlapped features are used to eliminate the accumulated errors caused by added view images, which improved the camera's position precision. At last, the method is verified with the application of dental restoration CAD/CAM, experiment results show that the proposed method is fast, accurate and flexible for tooth 3D measurement.

Thermal Analysis of ISS Service Module Active TCS

NASA Technical Reports Server (NTRS)

Altov, Vladimir V.; Zaletaev, Sergey V.; Belyavskiy, Evgeniy P.

2000-01-01

ISS Service Module mission must begin in July 2000. The verification of design thermal requirements is mostly due to thermal analysis. The thermal analysis is enough difficult problem because of large number of ISS configurations that had to be investigated and various orbital environments. Besides the ISS structure has articulating parts such as solar arrays and radiators. The presence of articulating parts greatly increases computation times and requires accurate approach to organization of calculations. The varying geometry needs us to calculate the view factors several times during the orbit, while in static geometry case we need do it only once. In this paper we consider the thermal mathematical model of SM that includes the TCS and construction thermal models and discuss the results of calculations for ISS configurations 1R and 9Al. The analysis is based on solving the nodal heat balance equations for ISS structure by Kutta-Merson method and analytical solutions of heat transfer equations for TCS units. The computations were performed using thermal software TERM [1,2] that will be briefly described.

Component Neural Systems for the Creation of Emotional Memories during Free Viewing of a Complex, Real-World Event

PubMed Central

Botzung, Anne; LaBar, Kevin S.; Kragel, Philip; Miles, Amanda; Rubin, David C.

2010-01-01

To investigate the neural systems that contribute to the formation of complex, self-relevant emotional memories, dedicated fans of rival college basketball teams watched a competitive game while undergoing functional magnetic resonance imaging (fMRI). During a subsequent recognition memory task, participants were shown video clips depicting plays of the game, stemming either from previously-viewed game segments (targets) or from non-viewed portions of the same game (foils). After an old–new judgment, participants provided emotional valence and intensity ratings of the clips. A data driven approach was first used to decompose the fMRI signal acquired during free viewing of the game into spatially independent components. Correlations were then calculated between the identified components and post-scanning emotion ratings for successfully encoded targets. Two components were correlated with intensity ratings, including temporal lobe regions implicated in memory and emotional functions, such as the hippocampus and amygdala, as well as a midline fronto-cingulo-parietal network implicated in social cognition and self-relevant processing. These data were supported by a general linear model analysis, which revealed additional valence effects in fronto-striatal-insular regions when plays were divided into positive and negative events according to the fan's perspective. Overall, these findings contribute to our understanding of how emotional factors impact distributed neural systems to successfully encode dynamic, personally-relevant event sequences. PMID:20508750

Harmonic oscillations of a longitudinal shear infinite hollow cylinder arbitrary cross-section with a tunnel crack

NASA Astrophysics Data System (ADS)

Kyrylova, O. I.; Popov, V. G.

2018-04-01

An effective analytical-numerical method for determining the dynamic stresses in a hollow cylindrical body of arbitrary cross-section with a tunnel crack under antiplane strain conditions is proposed. The method allows separately solving the integral equations on the crack faces and satisfying the boundary conditions on the body boundaries. It provides a convenient numerical scheme. Approximate formulas for calculating the dynamic stress intensity factors in a neighborhood of the crack are obtained and the influence of the crack geometry and wave number on these quantities is investigated, especially from the point of view of the resonance existence.

ASDIR-II. Volume I. User Manual

DTIC Science & Technology

1975-12-01

normally the most significant part of the overall aircraft IR signature. The 4 radiance is directly dependent upon the geometric view factors , a set...tactors as punched card output in. a view factor computer run. For the view factor computer run IB49 through 53 and all IDS input A, from IDS-2 to IDS-6...may be excluded from the input string if the * program execution is requested to stop after punching the viewv factors . Inputs required for punching

Study on temperature measurement of gas turbine blade based on analysis of error caused by the reflected radiation and emission angle

NASA Astrophysics Data System (ADS)

Li, Dong; Feng, Chi; Gao, Shan; Chen, Liwei; Daniel, Ketui

2018-06-01

Accurate measurement of gas turbine blade temperature is of great significance as far as blade health monitoring is concerned. An important method for measuring this temperature is the use of a radiation pyrometer. In this research, error of the pyrometer caused by reflected radiation from the surfaces surrounding the target and the emission angle of the target was analyzed. Important parameters for this analysis were the view factor between interacting surfaces, spectral directional emissivity, pyrometer operating wavelength and the surface temperature distribution on the blades and the vanes. The interacting surface of the rotor blade and the vane models used were discretized using triangular surface elements from which contour integral was used to calculate the view factor between the surface elements. Spectral directional emissivities were obtained from an experimental setup of Ni based alloy samples. A pyrometer operating wavelength of 1.6 μm was chosen. Computational fluid dynamics software was used to simulate the temperature distribution of the rotor blade and the guide vane based on the actual gas turbine input parameters. Results obtained in this analysis show that temperature error introduced by reflected radiation and emission angle ranges from  ‑23 K to 49 K.

Sedentary behaviour and clustered metabolic risk in adolescents: the HELENA study.

PubMed

Rey-López, J P; Bel-Serrat, S; Santaliestra-Pasías, A; de Moraes, A C; Vicente-Rodríguez, G; Ruiz, J R; Artero, E G; Martínez-Gómez, D; Gottrand, F; De Henauw, S; Huybrechts, I; Polito, A; Molnar, D; Manios, Y; Moreno, L A

2013-10-01

Although sedentary behaviours are linked with mortality for cardiovascular reasons, it is not clear whether they are negatively related with cardio-metabolic risk factors. The aim was to examine the association between time engaged in television (TV) viewing or playing with videogames and a clustered cardio-metabolic risk in adolescents. Sedentary behaviours and physical activity were assessed in 769 adolescents (376 boys, aged 12.5-17.5 years) from the HELENA-CSS study. We measured systolic blood pressure, HOMA index, triglycerides, TC/HDL-c, VO₂max and the sum of four skinfolds, and a clustered metabolic risk index was computed. A multilevel regression model (by Poisson) was performed to calculate the prevalence ratio of having a clustered metabolic risk. In boys, playing >4 h/day with videogames (weekend) and moderate to vigorous PA (MVPA) was associated with cardio-metabolic risk after adjustment for age, maternal education and MVPA. In contrast, TV viewing was not associated with the presence of cardio-metabolic risk. In boys, playing with videogames may impair cardio-metabolic health during the adolescence. Adolescents should be encouraged to increase their participation in physical activity of at least moderate intensity to obtain a more favourable risk factor profile. Copyright © 2012 Elsevier B.V. All rights reserved.

What are the factors that contribute to road accidents? An assessment of law enforcement views, ordinary drivers' opinions, and road accident records.

PubMed

Rolison, Jonathan J; Regev, Shirley; Moutari, Salissou; Feeney, Aidan

2018-06-01

What are the main contributing factors to road accidents? Factors such as inexperience, lack of skill, and risk-taking behaviors have been associated with the collisions of young drivers. In contrast, visual, cognitive, and mobility impairment have been associated with the collisions of older drivers. We investigated the main causes of road accidents by drawing on multiple sources: expert views of police officers, lay views of the driving public, and official road accident records. In Studies 1 and 2, police officers and the public were asked about the typical causes of road traffic collisions using hypothetical accident scenarios. In Study 3, we investigated whether the views of police officers and the public about accident causation influence their recall accuracy for factors reported to contribute to hypothetical road accidents. The results show that both expert views of police officers and lay views of the driving public closely approximated the typical factors associated with the collisions of young and older drivers, as determined from official accident records. The results also reveal potential underreporting of factors in existing accident records, identifying possible inadequacies in law enforcement practices for investigating driver distraction, drug and alcohol impairment, and uncorrected or defective eyesight. Our investigation also highlights a need for accident report forms to be continuously reviewed and updated to ensure that contributing factor lists reflect the full range of factors that contribute to road accidents. Finally, the views held by police officers and the public on accident causation influenced their memory recall of factors involved in hypothetical scenarios. These findings indicate that delay in completing accident report forms should be minimised, possibly by use of mobile reporting devices at the accident scene. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Thermal bioclimate in Strasbourg - the 2003 heat wave

NASA Astrophysics Data System (ADS)

Matzarakis, Andreas; de Rocco, Manuela; Najjar, Georges

2009-10-01

This case study highlights the implications of the 2003 heat wave for the city of Strasbourg, France. The urban centers of France and other European countries were particularly affected by the heat wave. In some urban areas, the mortality rate was 60% above the expected value (Institute de Veille Sanitaire, 2003). The 2003 heat wave demonstrated once again that populations in urban centers are much more affected by extreme meteorological events than people living in rural areas. The aim of this analysis is to explore differences in thermal comfort conditions of (a) the city center of Strasbourg, and (b) its hinterland. The differences in thermal conditions existing between rural and urban areas are quantified by using a bio-climatological index termed physiologically equivalent temperature (PET). This index is based on the human energy balance and builds a relevant index for the quantification of the thermal environment of humans. We calculate the PET for the years 2003 and 2004 to highlight the temporal changes in the severity of climate extremes. The spatial scope of this study is improved compared to previous works in the field through the inclusion of PET calculations for five different sites on a central place in Strasbourg (Place Kléber). The calculations are characterized by different sky view factors and are compared to the reference site, which is located in a rural area. In the rural hinterland (Entzheim), the analysis of PET indicates a strong cold thermal stress during the winter months but no significant stress in summer. In 2003, summer temperatures were sensed as warmer compared to other years, but did not reach the extreme temperatures that may cause severe heat stress. For both the rural and the urban study sites PET was higher in the summer of 2003 than in 2004, which reflects the inferior thermal conditions in the urban area during the heat wave in 2003. For the entire study period, urban and rural day-time PET reached similar maximal values. Strong differences in PET, however, were observed between the rural and urban areas at night-time. The study of PET for several study sites on a central place in the city (Place Kléber) of Strasbourg for the years 2003 and 2004 showed that the sites with a higher sky view factor present higher values than sites with a lower sky view factor. The comparison of these PET values (Place Kléber) to the results for the rural area showed that during the day and the night the rural city of Entzheim has the lowest PET. During the day, the site at Place Kléber, which is located under a tree, has the lowest PET. The comparison of PET for the years 2003 and 2004 shows that PET in 2003 was about 5 to 7 K higher.

Effects of changing canopy directional reflectance on feature selection

NASA Technical Reports Server (NTRS)

Smith, J. A.; Oliver, R. E.; Kilpela, O. E.

1973-01-01

The use of a Monte Carlo model for generating sample directional reflectance data for two simplified target canopies at two different solar positions is reported. Successive iterations through the model permit the calculation of a mean vector and covariance matrix for canopy reflectance for varied sensor view angles. These data may then be used to calculate the divergence between the target distributions for various wavelength combinations and for these view angles. Results of a feature selection analysis indicate that different sets of wavelengths are optimum for target discrimination depending on sensor view angle and that the targets may be more easily discriminated for some scan angles than others. The time-varying behavior of these results is also pointed out.

Modeling and in situ measurements of biometeorological conditions in microenvironments within the Athens University Campus, Greece

NASA Astrophysics Data System (ADS)

Nastos, Panagiotis T.; Polychroni, Iliana D.

2016-10-01

The objective of this research is to assess and analyze the biometeorological perception in complex microenvironments in the Athens University Campus (AUC) using urban micromodels, such as RayMan. The human thermal sensation in such a place was considered of great significance due to the great gathering of student body and staff of the University. The quantification of the biometeorological conditions was succeeded by the estimation of the physiologically equivalent temperature (PET), which is a biometeorological index based on the human energy balance. We carried out, on one hand, field measurements of air temperature, relative humidity, wind speed, and global solar irradiance for different sites (building atrium, open area, and green atrium) of the examined microurban environment in order to calculate PET during January-July 2013. Additionally, on the other hand, PET modeling was performed using different sky-view factors and was compared to a reference site (meteorological station of Laboratory of Climatology and Atmospheric Environment, University of Athens). The global radiation was transferred to the examined sites with the RayMan model, which considers the sky-view factors for the adaptation of the radiation fluxes to simple and complex environments. The results of this study reveal the crucial importance of the existence of trees and green cover in a complex environment, as a factor that could be the solution to the efforts of stake holders in order to mitigate strong heat stress and improve people's living quality in urban areas.

Urban Morphology Influence on Urban Albedo: A Revisit with the S olene Model

NASA Astrophysics Data System (ADS)

Groleau, Dominique; Mestayer, Patrice G.

2013-05-01

This heuristic study of the urban morphology influence on urban albedo is based on some 3,500 simulations with the S olene model. The studied configurations include square blocks in regular and staggered rows, rectangular blocks with different street widths, cross-shaped blocks, infinite street canyons and several actual districts in Marseilles, Toulouse and Nantes, France. The scanned variables are plan density, facade density, building height, layout orientation, latitude, date and time of the day. The sky-view factors of the ground and canopy surfaces are also considered. This study demonstrates the significance of the facade density, in addition to the built plan density, as the explanatory geometrical factor to characterize the urban morphology, rather than building height. On the basis of these albedo calculations the puzzling results of Kondo et al. (Boundary-Layer Meteorol 100:225-242, 2001) for the influence of building height are explained, and the plan density influence is quantitatively assessed. It is shown that the albedo relationship with plan and facade densities obtained with the regular square plot configuration may be considered as a reference for all other configurations, with the exception of the infinite street canyon that shows systematic differences for the lower plan densities. The curves representing this empirical relationship may be used as a sort of abacus for all other geometries while an approximate simple mathematical model is proposed, as well as relationships between the albedo and sky-view factors.

Modeling and in situ measurements of biometeorological conditions in microenvironments within the Athens University Campus, Greece.

PubMed

Nastos, Panagiotis T; Polychroni, Iliana D

2016-10-01

The objective of this research is to assess and analyze the biometeorological perception in complex microenvironments in the Athens University Campus (AUC) using urban micromodels, such as RayMan. The human thermal sensation in such a place was considered of great significance due to the great gathering of student body and staff of the University. The quantification of the biometeorological conditions was succeeded by the estimation of the physiologically equivalent temperature (PET), which is a biometeorological index based on the human energy balance. We carried out, on one hand, field measurements of air temperature, relative humidity, wind speed, and global solar irradiance for different sites (building atrium, open area, and green atrium) of the examined microurban environment in order to calculate PET during January-July 2013. Additionally, on the other hand, PET modeling was performed using different sky-view factors and was compared to a reference site (meteorological station of Laboratory of Climatology and Atmospheric Environment, University of Athens). The global radiation was transferred to the examined sites with the RayMan model, which considers the sky-view factors for the adaptation of the radiation fluxes to simple and complex environments. The results of this study reveal the crucial importance of the existence of trees and green cover in a complex environment, as a factor that could be the solution to the efforts of stake holders in order to mitigate strong heat stress and improve people's living quality in urban areas.

22. INTERIOR VIEW WITH INTERIOR VIEW OF MOLDING SANDS CONTROL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. INTERIOR VIEW WITH INTERIOR VIEW OF MOLDING SANDS CONTROL AND TEST LAB FOR UNIT NO. 2 GREY IRON DISAMATIC. SAND CASTING TECHNICIAN, ROY BATES, TESTS THE WEIGHT OF THE SAND, DRYS IT, AND WEIGHT IT AGAINST STANDARDS TO CALCULATE THE CORRECT MOISTURE NEEDED FOR DIFFERENT MOLDS. THE SAND MIX VARY WITH THE SIZE AND COMPOSITION OF THE CASTING. - Stockham Pipe & Fittings Company, Grey Iron Foundry, 4000 Tenth Avenue North, Birmingham, Jefferson County, AL

Dosimetry of 3 CBCT devices for oral and maxillofacial radiology: CB Mercuray, NewTom 3G and i-CAT.

PubMed

Ludlow, J B; Davies-Ludlow, L E; Brooks, S L; Howerton, W B

2006-07-01

Cone beam computed tomography (CBCT), which provides a lower dose, lower cost alternative to conventional CT, is being used with increasing frequency in the practice of oral and maxillofacial radiology. This study provides comparative measurements of effective dose for three commercially available, large (12'') field-of-view (FOV), CBCT units: CB Mercuray, NewTom 3G and i-CAT. Thermoluminescent dosemeters (TLDs) were placed at 24 sites throughout the layers of the head and neck of a tissue-equivalent human skull RANDO phantom. Depending on availability, the 12'' FOV and smaller FOV scanning modes were used with similar phantom positioning geometry for each CBCT unit. Radiation weighted doses to individual organs were summed using 1990 (E(1990)) and proposed 2005 (E(2005 draft)) ICRP tissue weighting factors to calculate two measures of whole-body effective dose. Dose as a multiple of a representative panoramic radiography dose was also calculated. For repeated runs dosimetry was generally reproducible within 2.5%. Calculated doses in microSv [corrected] (E(1990), E(2005 draft)) were NewTom3G (45, 59), i-CAT (135, 193) and CB Mercuray (477, 558). These are 4 to 42 times greater than comparable panoramic examination doses (6.3 microSv [corrected] 13.3 mSv). Reductions in dose were seen with reduction in field size and mA and kV technique factors. CBCT dose varies substantially depending on the device, FOV and selected technique factors. Effective dose detriment is several to many times higher than conventional panoramic imaging and an order of magnitude or more less than reported doses for conventional CT.

There Is Time for Calculation in Speed Chess, and Calculation Accuracy Increases With Expertise.

PubMed

Chang, Yu-Hsuan A; Lane, David M

2016-01-01

The recognition-action theory of chess skill holds that expertise in chess is due primarily to the ability to recognize familiar patterns of pieces. Despite its widespread acclaim, empirical evidence for this theory is indirect. One source of indirect evidence is that there is a high correlation between speed chess and standard chess. Assuming that there is little or no time for calculation in speed chess, this high correlation implies that calculation is not the primary factor in standard chess. Two studies were conducted analyzing 100 games of speed chess. In Study 1, we examined the distributions of move times, and the key finding was that players often spent considerable time on a few moves. Moreover, stronger players were more likely than weaker players to do so. Study 2 examined skill differences in calculation by examining poor moves. The stronger players made proportionally fewer blunders (moves that a 2-ply search would have revealed to be errors). Overall, the poor moves made by the weaker players would have required a less extensive search to be revealed as poor moves than the poor moves made by the stronger players. Apparently, the stronger players are searching deeper and more accurately. These results are difficult to reconcile with the view that speed chess does not allow players time to calculate extensively and call into question the assertion that the high correlation between speed chess and standard chess supports recognition-action theory.

Form Factor Measurements at BESIII for an Improved Standard Model Prediction of the Muon g-2

NASA Astrophysics Data System (ADS)

Destefanis, Marco

The anomalous part of the magnetic moment of the muon, (g-2)μ, allows for one of the most precise tests of the Standard Model of particle physics. We report on recent results by the BESIII Collaboration of exclusive hadronic cross section channels, such as the 2π, 3π, and 4π final states. These measurements are of utmost importance for an improved calculation of the hadronic vacuum polarization contribution of (g-2)μ, which currenty is limiting the overall Standard Model prediction of this quantity. BESIII has furthermore also intiatated a programme of spacelike transition form factor measurements, which can be used for a determination of the hadronic light-by-light contribution of (g-2)μ in a data-driven approach. These results are of relevance in view of the new and direct measurements of (g-2)μ as foreseen at Fermilab/USA and J-PARC/Japan.

Assessment of sustainable urban transport development based on entropy and unascertained measure.

PubMed

Li, Yancang; Yang, Jing; Shi, Huawang; Li, Yijie

2017-01-01

To find a more effective method for the assessment of sustainable urban transport development, the comprehensive assessment model of sustainable urban transport development was established based on the unascertained measure. On the basis of considering the factors influencing urban transport development, the comprehensive assessment indexes were selected, including urban economical development, transport demand, environment quality and energy consumption, and the assessment system of sustainable urban transport development was proposed. In view of different influencing factors of urban transport development, the index weight was calculated through the entropy weight coefficient method. Qualitative and quantitative analyses were conducted according to the actual condition. Then, the grade was obtained by using the credible degree recognition criterion from which the urban transport development level can be determined. Finally, a comprehensive assessment method for urban transport development was introduced. The application practice showed that the method can be used reasonably and effectively for the comprehensive assessment of urban transport development.

Prospective Teachers' Views on the Use of Calculators with Computer Algebra System in Algebra Instruction

ERIC Educational Resources Information Center

Ozgun-Koca, S. Ash

2010-01-01

Although growing numbers of secondary school mathematics teachers and students use calculators to study graphs, they mainly rely on paper-and-pencil when manipulating algebraic symbols. However, the Computer Algebra Systems (CAS) on computers or handheld calculators create new possibilities for teaching and learning algebraic manipulation. This…

Development of MATLAB Scripts for the Calculation of Thermal Manikin Regional Resistance Values

DTIC Science & Technology

2016-01-01

CALCULATION OF THERMAL MANIKIN REGIONAL RESISTANCE VALUES DISCLAIMER The opinions or assertions contained herein are the private views of the...USARIEM TECHNICAL NOTE TN16-1 DEVELOPMENT OF MATLAB® SCRIPTS FOR THE CALCULATION OF THERMAL MANIKIN REGIONAL RESISTANCE VALUES...performed by thermal manikin and modeling personnel. Steps to operate the scripts as well as the underlying calculations are outlined in detail

Humanism Factors and Islam Viewpoint from Motahri's Point of View

ERIC Educational Resources Information Center

Yousefi, Zargham; Yousefy, Alireza; Keshtiaray, Narges

2015-01-01

The aim of this research is to criticize liberal humanism based on Islam viewpoint emphasizing Motahri's point of view. In this paper, the researchers tried to identify liberalism humanism factors with analytical look in order to present a new categorization called "main factor of liberal humanism". Then, each factor was studied and…

ANALYTICAL TOOLS INTERFACE FOR LANDSCAPE ASSESSMENTS (ATTILA) USER MANUAL

EPA Science Inventory

ATtlLA is an ArcView extension that allows users to easily calculate many common landscape metrics. GIS expertise is not required, but some experience with ArcView is recommended. Four metric groups are currently included in ATtILA: landscape characteristics, riparian characteris...

Gender-specific factors associated with shorter sleep duration at age 3 years.

PubMed

Plancoulaine, Sabine; Lioret, Sandrine; Regnault, Nolwenn; Heude, Barbara; Charles, Marie-Aline

2015-12-01

Total sleep duration has been decreasing among children in the last decades. Short sleep duration (SSD) has been associated with deleterious health consequences, such as excess weight/obesity. Risk factors for SSD have already been studied among school-aged children and adolescents, but inconsistent results have been reported regarding possible gender differences. Studies reporting such relationships are scarce in preschoolers, despite the importance of this period for adopting healthy behaviour. We aimed to investigate factors associated with SSD in 3-year-old boys (n = 546) and girls (n = 482) in a French Mother-Child Cohort (EDEN Study). Children were born between 2003 and 2006 in two French university hospitals. Clinical examinations and parent self-reported questionnaires allowed us to collect sociodemographic (e.g. income, education, family situation, child-minding system), maternal [e.g. body mass index (BMI), parity, depression, breastfeeding duration] and child's characteristics (e.g. gender, birth weight, term, physical activity and TV viewing duration, food consumption, usual sleep time). Sleep duration/24-h period was calculated and SSD was defined as <12 h. Analyses were performed using logistic regression. The mean sleep duration was 12 h 35 ± 56 min, with 91% of the children napping. Patterns of risk factors associated with SSD differed according to gender. In addition to parental presence when falling asleep, short sleep duration was associated strongly positively with high BMI Z-score and TV viewing duration among boys and with familial home child-minding and lower scores on the 'fruits and vegetables' dietary pattern among girls. These results suggest either a patterning of parental behaviours that differs according to gender, or a gender-specific sleep physiology, or both. © 2015 European Sleep Research Society.

Projected Shell Model Description of Positive Parity Band of 130Pr Nucleus

NASA Astrophysics Data System (ADS)

Singh, Suram; Kumar, Amit; Singh, Dhanvir; Sharma, Chetan; Bharti, Arun; Bhat, G. H.; Sheikh, J. A.

2018-02-01

Theoretical investigation of positive parity yrast band of odd-odd 130Pr nucleus is performed by applying the projected shell model. The present study is undertaken to investigate and verify the very recently observed side band in 130Pr theoretically in terms of quasi-particle (qp) configuration. From the analysis of band diagram, the yrast as well as side band are found to arise from two-qp configuration πh 11/2 ⊗ νh 11/2. The present calculations are viewed to have qualitatively reproduced the known experimental data for yrast states, transition energies, and B( M1) / B( E2) ratios of this nucleus. The recently observed positive parity side band is also reproduced by the present calculations. The energy states of the side band are predicted up to spin 25+, which is far above the known experimental spin of 18+ and this could serve as a motivational factor for future experiments. In addition, the reduced transition probability B( E2) for interband transitions has also been calculated for the first time in projected shell model, which would serve as an encouragement for other research groups in the future.

Influence of sampling rate on the calculated fidelity of an aircraft simulation

NASA Technical Reports Server (NTRS)

Howard, J. C.

1983-01-01

One of the factors that influences the fidelity of an aircraft digital simulation is the sampling rate. As the sampling rate is increased, the calculated response of the discrete representation tends to coincide with the response of the corresponding continuous system. Because of computer limitations, however, the sampling rate cannot be increased indefinitely. Moreover, real-time simulation requirements demand that a finite sampling rate be adopted. In view of these restrictions, a study was undertaken to determine the influence of sampling rate on the response characteristics of a simulated aircraft describing short-period oscillations. Changes in the calculated response characteristics of the simulated aircraft degrade the fidelity of the simulation. In the present context, fidelity degradation is defined as the percentage change in those characteristics that have the greatest influence on pilot opinion: short period frequency omega, short period damping ratio zeta, and the product omega zeta. To determine the influence of the sampling period on these characteristics, the equations describing the response of a DC-8 aircraft to elevator control inputs were used. The results indicate that if the sampling period is too large, the fidelity of the simulation can be degraded.

The New Performance Calculation Method of Fouled Axial Flow Compressor

PubMed Central

Xu, Hong

2014-01-01

Fouling is the most important performance degradation factor, so it is necessary to accurately predict the effect of fouling on engine performance. In the previous research, it is very difficult to accurately model the fouled axial flow compressor. This paper develops a new performance calculation method of fouled multistage axial flow compressor based on experiment result and operating data. For multistage compressor, the whole compressor is decomposed into two sections. The first section includes the first 50% stages which reflect the fouling level, and the second section includes the last 50% stages which are viewed as the clean stage because of less deposits. In this model, the performance of the first section is obtained by combining scaling law method and linear progression model with traditional stage stacking method; simultaneously ambient conditions and engine configurations are considered. On the other hand, the performance of the second section is calculated by averaged infinitesimal stage method which is based on Reynolds' law of similarity. Finally, the model is successfully applied to predict the 8-stage axial flow compressor and 16-stage LM2500-30 compressor. The change of thermodynamic parameters such as pressure ratio, efficiency with the operating time, and stage number is analyzed in detail. PMID:25197717

Introducing Calculators to Learners Early in Their Schooling: The Effect on Long-Term Arithmetic Proficiency

ERIC Educational Resources Information Center

Mogari, David; Faleye, Sunday

2012-01-01

There are opposing views about calculator use in school mathematics. This paper reports on a study that investigated the arithmetic proficiency of mathematics 1 university students and the effects of calculator usage at school level on their proficiency. The study followed a descriptive survey design involving the use of questionnaire and data…

The pQCT 'Bone Strength Indices' (BSIs, SSI). Relative mechanical impact and diagnostic value of the indicators of bone tissue and design quality employed in their calculation in healthy men and pre- and post-menopausal women.

PubMed

Cointry, G R; Ferretti, J L; Reina, P S; Nocciolino, L M; Rittweger, J; Capozza, R F

2014-03-01

The pQCT-assessed Bone Strength Indices (BSI's, SSI) depend on the product of a 'quality' indicator, the cortical vBMD (vCtD), and a 'design' indicator, one of the cross-sectional moments of inertia or related variables (MIs) in long bones. As the MIs vary naturally much more than the vCtD and represent different properties, it could be that the variation of the indices might not reflect the relative mechanical impact of the variation of their determinant factors in different individuals or circumstances. To understand this problem, we determined the vCtD and MI's in tibia scans of 232 healthy men and pre- and post-MP women, expressed in SD of the means calculated for each group, and analyzed the independent influence of 1 SD unit of variation of each factor on that of the indices by multiple correlations. Results showed: 1. that the independent influence of the MIs on the indices was generally larger than that of the vCtD, and 2. that in post-MP women the influence of the vCtD was larger than it was in the other groups. This confirms the view that inter-individual variation of vCtD is comparatively small, and that mechanical competence of human bone is mostly determined by 'design' factors.

Plots, Calculations and Graphics Tools (PCG2). Software Transfer Request Presentation

NASA Technical Reports Server (NTRS)

Richardson, Marilou R.

2010-01-01

This slide presentation reviews the development of the Plots, Calculations and Graphics Tools (PCG2) system. PCG2 is an easy to use tool that provides a single user interface to view data in a pictorial, tabular or graphical format. It allows the user to view the same display and data in the Control Room, engineering office area, or remote sites. PCG2 supports extensive and regular engineering needs that are both planned and unplanned and it supports the ability to compare, contrast and perform ad hoc data mining over the entire domain of a program's test data.

Rigorous analysis of an electric-field-driven liquid crystal lens for 3D displays

NASA Astrophysics Data System (ADS)

Kim, Bong-Sik; Lee, Seung-Chul; Park, Woo-Sang

2014-08-01

We numerically analyzed the optical performance of an electric field driven liquid crystal (ELC) lens adopted for 3-dimensional liquid crystal displays (3D-LCDs) through rigorous ray tracing. For the calculation, we first obtain the director distribution profile of the liquid crystals by using the Erickson-Leslie motional equation; then, we calculate the transmission of light through the ELC lens by using the extended Jones matrix method. The simulation was carried out for a 9view 3D-LCD with a diagonal of 17.1 inches, where the ELC lens was slanted to achieve natural stereoscopic images. The results show that each view exists separately according to the viewing position at an optimum viewing distance of 80 cm. In addition, our simulation results provide a quantitative explanation for the ghost or blurred images between views observed from a 3D-LCD with an ELC lens. The numerical simulations are also shown to be in good agreement with the experimental results. The present simulation method is expected to provide optimum design conditions for obtaining natural 3D images by rigorously analyzing the optical functionalities of an ELC lens.

Pedestrian injury mitigation by autonomous braking.

PubMed

Rosén, Erik; Källhammer, Jan-Erik; Eriksson, Dick; Nentwich, Matthias; Fredriksson, Rikard; Smith, Kip

2010-11-01

The objective of this study was to calculate the potential effectiveness of a pedestrian injury mitigation system that autonomously brakes the car prior to impact. The effectiveness was measured by the reduction of fatally and severely injured pedestrians. The database from the German In-Depth Accident Study (GIDAS) was queried for pedestrians hit by the front of cars from 1999 to 2007. Case by case information on vehicle and pedestrian velocities and trajectories were analysed to estimate the field of view needed for a vehicle-based sensor to detect the pedestrians one second prior to the crash. The pre-impact braking system was assumed to activate the brakes one second prior to crash and to provide a braking deceleration up to the limit of the road surface conditions, but never to exceed 0.6 g. New impact speeds were then calculated for pedestrians that would have been detected by the sensor. These calculations assumed that all pedestrians who were within a given field of view but not obstructed by surrounding objects would be detected. The changes in fatality and severe injury risks were quantified using risk curves derived by logistic regression of the accident data. Summing the risks for all pedestrians, relationships between mitigation effectiveness, sensor field of view, braking initiation time, and deceleration were established. The study documents that the effectiveness at reducing fatally (severely) injured pedestrians in frontal collisions with cars reached 40% (27%) at a field of view of 40 degrees. Increasing the field of view further led to only marginal improvements in effectiveness. 2010 Elsevier Ltd. All rights reserved.

Fringe periods of color moirés in contact-type 3-D displays.

PubMed

Lee, Hyoung; Kim, Sung-Kyu; Sohn, Kwanghoon; Son, Jung-Young; Chernyshov, Oleksii O

2016-06-27

A mathematical formula of calculating the fringe periods of the color moirés appearing at the contact-type 3-D displays is derived. It is typical that the color moirés are chirped and the period of the line pattern in viewing zone forming optics is more than two times of that of the pixel pattern in the display panel. These make impossible to calculate the fringe periods of the color moirés with the conventional beat frequency formula. The derived formula work very well for any combination of two line patterns having either a same line period or different line periods. This is experimentally proved. Furthermore, it is also shown that the fringe period can be expressed in terms of the viewing distance and focal length of the viewing zone forming optics.

Spectral and angular-selective thermal emission from gallium-doped zinc oxide thin film structures

NASA Astrophysics Data System (ADS)

Sakr, Enas; Bermel, Peter

2017-02-01

Simultaneously controlling both the spectral and angular emission of thermal photons can qualitatively change the nature of thermal radiation, and offers a great potential to improve a broad range of applications, including infrared light sources and thermophotovoltaic (TPV) conversion of waste heat to electricity. For TPV in particular, frequency-selective emission is necessary for spectral matching with a photovoltaic converter, while directional emission is needed to maximize the fraction of emission reaching the receiver at large separation distances. This can allow the photovoltaics to be moved outside vacuum encapsulation. In this work, we demonstrate both directionally and spectrally-selective thermal emission for p-polarization, using a combination of an epsilon-near-zero (ENZ) thin film backed by a metal reflector, a high contrast grating, and an omnidirectional mirror. Gallium-doped zinc oxide is selected as an ENZ material, with cross-over frequency in the near-infrared. The proposed structure relies on coupling guided modes (instead of plasmonic modes) to the ENZ thin film using the high contrast grating. The angular width is thus controlled by the choice of grating period. Other off-directional modes are then filtered out using the omnidirectional mirror, thus enhancing frequency selectivity. Our emitter design maintains both a high view factor and high frequency selectivity, leading to a factor of 8.85 enhancement over a typical blackbody emitter, through a combination of a 22.26% increase in view factor and a 6.88x enhancement in frequency selectivity. This calculation assumes a PV converter five widths away from the same width emitter in 2D at 1573 K.

Association of sedentary behavior time with ideal cardiovascular health: the ORISCAV-LUX study.

PubMed

Crichton, Georgina E; Alkerwi, Ala'a

2014-01-01

Recently attention has been drawn to the health impacts of time spent engaging in sedentary behaviors. No studies have examined sedentary behaviors in relation to the newly defined construct of ideal cardiovascular health, which incorporates three health factors (blood pressure, total cholesterol, fasting plasma glucose) and four behaviors (physical activity, smoking, body mass index, diet). The purpose of this study was to examine associations between sedentary behaviors, including sitting time, and time spent viewing television and in front of a computer, with cardiovascular health, in a representative sample of adults from Luxembourg. A cross-sectional analysis of 1262 participants in the Observation of Cardiovascular Risk Factors in Luxembourg study was conducted, who underwent objective cardiovascular health assessments and completed the International Physical Activity Questionnaire. A Cardiovascular Health Score was calculated based on the number of health factors and behaviors at ideal levels. Sitting time on a weekday, television time, and computer time (both on a workday and a day off), were related to the Cardiovascular Health Score. Higher weekday sitting time was significantly associated with a poorer Cardiovascular Health Score (p = 0.002 for linear trend), after full adjustment for age, gender, education, income and occupation. Television time was inversely associated with the Cardiovascular Health Score, on both a workday and a day off (p = 0.002 for both). A similar inverse relationship was observed between the Cardiovascular Health Score and computer time, only on a day off (p = 0.04). Higher time spent sitting, viewing television, and using a computer during a day off may be unfavorably associated with ideal cardiovascular health.

Theoretical and vibrational study of N-(3-chloro-4-fluoro-phenyl)-7-methoxy-6-(3-morpholin-4-ylpropoxy)-quinazolin-4-amine (gefitinib)

NASA Astrophysics Data System (ADS)

Mıhçıokur, Özlem; Özpozan, Talat

2015-12-01

N-(3-chloro-4fluoro-phenyl)-7-methoxy-6-(3-morpholin-4ylpropoxy)-quinazolin-4-amine (GEF), a quinalizoline derivative used as new anti-cancer agent, designed to target activity of epidermal growth factor receptor (EGFR) promoting the growth, division and spread of cancer cells, was examined from the vibrational and theoretical point of view. All calculations have been carried out both in gaseous and aqueous phases. In the calculations of both phases, the molecule has been optimized through conformer analysis beginning with the x-ray data. The conformer analyses have been carried out in each phases and the geometrical differences between the most stable structures in gaseous and in aqueous phases have been discussed. The solvent effect for GEF in aqueous solution was simulated by using self-consistent reaction field (SCRF) calculations employing the integral equation formalism variant (IEFPCM) model. NBO analysis has been performed to indicate the presence of intramolecular charge transfer. The complete assignments of the vibrational spectra (IR&Raman) were made with the aid of calculated spectra both in gaseous and aqueous phases. The observed spectral data of the title compound were compared with the calculated spectra obtained by DFT/B3LYP and DFT/B3PW91 methods using 6-31G(d,p) basis set. The theoretical results were found to be in good agreement with the measured experimental data especially for the interpretation of intra molecular interactions.

Multi-view non-negative tensor factorization as relation learning in healthcare data.

PubMed

Hang Wu; Wang, May D

2016-08-01

Discovering patterns in co-occurrences data between objects and groups of concepts is a useful task in many domains, such as healthcare data analysis, information retrieval, and recommender systems. These relational representations come from objects' behaviors in different views, posing a challenging task of integrating information from these views to uncover the shared latent structures. The problem is further complicated by the high dimension of data and the large ratio of missing data. We propose a new paradigm of learning semantic relations using tensor factorization, by jointly factorizing multi-view tensors and searching for a consistent underlying semantic space across each views. We formulate the idea as an optimization problem and propose efficient optimization algorithms, with a special treatment of missing data as well as high-dimensional data. Experiments results show the potential and effectiveness of our algorithms.

Development of Human Posture Simulation Method for Assessing Posture Angles and Spinal Loads

PubMed Central

Lu, Ming-Lun; Waters, Thomas; Werren, Dwight

2015-01-01

Video-based posture analysis employing a biomechanical model is gaining a growing popularity for ergonomic assessments. A human posture simulation method of estimating multiple body postural angles and spinal loads from a video record was developed to expedite ergonomic assessments. The method was evaluated by a repeated measures study design with three trunk flexion levels, two lift asymmetry levels, three viewing angles and three trial repetitions as experimental factors. The study comprised two phases evaluating the accuracy of simulating self and other people’s lifting posture via a proxy of a computer-generated humanoid. The mean values of the accuracy of simulating self and humanoid postures were 12° and 15°, respectively. The repeatability of the method for the same lifting condition was excellent (~2°). The least simulation error was associated with side viewing angle. The estimated back compressive force and moment, calculated by a three dimensional biomechanical model, exhibited a range of 5% underestimation. The posture simulation method enables researchers to simultaneously quantify body posture angles and spinal loading variables with accuracy and precision comparable to on-screen posture matching methods. PMID:26361435

Hyperspectral signatures and WorldView-3 imagery of Indian River Lagoon and Banana River Estuarine water and bottom types

NASA Astrophysics Data System (ADS)

Bostater, Charles R.; Oney, Taylor S.; Rotkiske, Tyler; Aziz, Samin; Morrisette, Charles; Callahan, Kelby; Mcallister, Devin

2017-10-01

Hyperspectral signatures and imagery collected during the spring and summer of 2017 and 2016 are presented. Ground sampling distances (GSD) and pixel sizes were sampled from just over a meter to less than 4.0 mm. A pushbroom hyperspectral imager was used to calculate bidirectional reflectance factor (BRF) signatures. Hyperspectral signatures of different water types and bottom habitats such as submerged seagrasses, drift algae and algal bloom waters were scanned using a high spectral and digital resolution solid state spectrograph. WorldView-3 satellite imagery with minimal water wave sun glint effects was used to demonstrate the ability to detect bottom features using a derivative reflectance spectroscopy approach with the 1.3 m GSD multispectral satellite channels centered at the solar induced fluorescence band. The hyperspectral remote sensing data collected from the Banana River and Indian River Lagoon watersheds represents previously unknown signatures to be used in satellite and airborne remote sensing of water in turbid waters along the US Atlantic Ocean coastal region and the Florida littoral zone.

Evaluation of Macro- and Microelement Levels in Black Tea in View of Its Geographical Origin.

PubMed

Brzezicha-Cirocka, Justyna; Grembecka, Małgorzata; Ciesielski, Tomasz; Flaten, Trond Peder; Szefer, Piotr

2017-04-01

The aim of this study was to evaluate the elemental composition of black tea samples and their infusions in view of their geographical origin. In total, 14 elements were analyzed, 13 (Ca, K, Mg, Na, Mn, Fe, Zn, Cu, Cr, Ni, Co, Cd, and Pb) by flame atomic absorption spectrometry, and P by UV-Vis spectrometry, after mineralization of samples. It was found that K was the most abundant macroelement in the analyzed samples, whereas among microelements, the highest concentration was found for Mn. Based on the obtained data, the percentage of elements leached into the infusions as well as the daily elemental intake from tea were calculated. The daily intake from tea was compared to the recommended daily allowances (RDAs), and the highest percentages of the RDAs were found for Mn (15 %) and Co (10 %). To study the relations between elemental composition and country of origin of samples, factor analysis and cluster analysis were applied. These multivariate techniques proved to be efficient tools able to differentiate samples according to their provenance as well as plantation within the common regions.

Urban Climate Station Site Selection Through Combined Digital Surface Model and Sun Angle Calculations

NASA Technical Reports Server (NTRS)

Kidd, Chris; Chapman, Lee

2012-01-01

Meteorological measurements within urban areas are becoming increasingly important due to the accentuating effects of climate change upon the Urban Heat Island (UHI). However, ensuring that such measurements are representative of the local area is often difficult due to the diversity of the urban environment. The evaluation of sites is important for both new sites and for the relocation of established sites to ensure that long term changes in the meteorological and climatological conditions continue to be faithfully recorded. Site selection is traditionally carried out in the field using both local knowledge and visual inspection. This paper exploits and assesses the use of lidar-derived digital surface models (DSMs) to quantitatively aid the site selection process. This is acheived by combining the DSM with a solar model, first to generate spatial maps of sky view factors and sun-hour potential and second, to generate site-specific views of the horizon. The results show that such a technique is a useful first-step approach to identify key sites that may be further evaluated for the location of meteorological stations within urban areas.

Design of a software for calculating isoelectric point of a polypeptide according to their net charge using the graphical programming language LabVIEW.

PubMed

Tovar, Glomen

2018-01-01

A software to calculate the net charge and to predict the isoelectric point (pI) of a polypeptide is developed in this work using the graphical programming language LabVIEW. Through this instrument the net charges of the ionizable residues of the polypeptide chains of the proteins are calculated at different pH values, tabulated, pI is predicted and an Excel (-xls) type file is generated. In this work, the experimental values of the pIs (pI) of different proteins are compared with the values of the pIs (pI) calculated graphically, achieving a correlation coefficient (R) of 0.934746 which represents a good reliability for a p < 0.01. In this way the generated program can constitute an instrument applicable in the laboratory, facilitating the calculation to graduate students and junior researchers. © 2017 by The International Union of Biochemistry and Molecular Biology, 46(1):39-46, 2018. © 2017 The International Union of Biochemistry and Molecular Biology.

Effect of viewing distance on 3D fatigue caused by viewing mobile 3D content

NASA Astrophysics Data System (ADS)

Mun, Sungchul; Lee, Dong-Su; Park, Min-Chul; Yano, Sumio

2013-05-01

With an advent of autostereoscopic display technique and increased needs for smart phones, there has been a significant growth in mobile TV markets. The rapid growth in technical, economical, and social aspects has encouraged 3D TV manufacturers to apply 3D rendering technology to mobile devices so that people have more opportunities to come into contact with many 3D content anytime and anywhere. Even if the mobile 3D technology leads to the current market growth, there is an important thing to consider for consistent development and growth in the display market. To put it briefly, human factors linked to mobile 3D viewing should be taken into consideration before developing mobile 3D technology. Many studies have investigated whether mobile 3D viewing causes undesirable biomedical effects such as motion sickness and visual fatigue, but few have examined main factors adversely affecting human health. Viewing distance is considered one of the main factors to establish optimized viewing environments from a viewer's point of view. Thus, in an effort to determine human-friendly viewing environments, this study aims to investigate the effect of viewing distance on human visual system when exposing to mobile 3D environments. Recording and analyzing brainwaves before and after watching mobile 3D content, we explore how viewing distance affects viewing experience from physiological and psychological perspectives. Results obtained in this study are expected to provide viewing guidelines for viewers, help ensure viewers against undesirable 3D effects, and lead to make gradual progress towards a human-friendly mobile 3D viewing.

TU-FG-209-08: Distribution of the Deviation Index (DI) in Digital Radiography Practices Across the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, A; Shepard, S; Dave, J

Purpose: To characterize the distribution of the deviation index (DI) in digital radiography practices across the United States. Methods: DI data was obtained from 10 collaborating institutions in the United States between 2012 and 2015. Each institution complied with the requirements of the Institutional Review Board at their site. DI data from radiographs of the body parts chest, abdomen, pelvis and extremity were analyzed for anteroposterior, posteroanterior, lateral, and decubitus views. The DI data was analyzed both in aggregate and stratified by exposure control method, image receptor technology, patient age, and participating site for each body part and view. Themore » number of exposures with DI falling within previously published control limits for DI and descriptive statistics were calculated. Results: DI data from 505,930 radiographic exposures was analyzed. The number of exposures with DI falling within published control limits for DI varied from 10 to 20% for adult patients and 10 to 23% for pediatric patients for different body parts and views. Mean DI values averaged over other parameters for radiographs of the abdomen, chest, pelvis, and extremities ranged from 0.3 to 1.0, −0.6 to 0.5, 0.8, and −0.9 to 0.5 for the different adult views and ranged from −1.6 to −0.1, −0.3 to 0.5, −0.1, −0.2 to 1.4 for the different pediatric views, respectively (DI data was solicited only for anteroposterior view of pelvis). Standard deviation values of DI from individual sites ranged from 1.3 to 3.6 and 1.3 to 3.0 for the different adult and pediatric views, respectively. Also of interest was that target exposure indicators varied by up to a factor of 6 between sites for certain body parts and views. Conclusion: Previously published DI control limits do not reflect the state of clinical practice in digital radiography. Mean DI and target exposure indicators are targets for quality improvement efforts in radiography.« less

Educational inequalities in TV viewing among older adults: a mediation analysis of ecological factors

PubMed Central

2013-01-01

Background Television (TV) viewing, a prevalent leisure-time sedentary behaviour independently related to negative health outcomes, appears to be higher in less educated and older adults. In order to tackle the social inequalities, evidence is needed about the underlying mechanisms of the association between education and TV viewing. The present purpose was to examine the potential mediating role of personal, social and physical environmental factors in the relationship between education and TV viewing among Australian 55–65 year-old adults. Methods In 2010, self-reported data was collected among 4082 adults (47.6% men) across urban and rural areas of Victoria, for the Wellbeing, Eating and Exercise for a Long Life (WELL) study. The mediating role of personal (body mass index [BMI], quality of life), social (social support from family and friends, social participation at proximal level, and interpersonal trust, social cohesion, personal safety at distal level) and physical environmental (neighbourhood aesthetics, neighbourhood physical activity environment, number of televisions) factors in the association between education and TV viewing time was examined using the product-of-coefficients test of MacKinnon based on multilevel linear regression analyses (conducted in 2012). Results Multiple mediating analyses showed that BMI (p ≤ 0.01), personal safety (p < 0.001), neighbourhood aesthetics (p ≤ 0.01) and number of televisions (p ≤ 0.01) partly explained the educational inequalities in older adult’s TV viewing. No proximal social factors mediated the education-TV viewing association. Conclusions Interventions aimed to reduce TV viewing should focus on personal (BMI) and environmental (personal safety, neighbourhood aesthetics, number of televisions) factors, in order to overcome educational inequalities in sedentary behaviour among older adults. PMID:24350830

Educational inequalities in TV viewing among older adults: a mediation analysis of ecological factors.

PubMed

De Cocker, Katrien; De Bourdeaudhuij, Ilse; Teychenne, Megan; McNaughton, Sarah; Salmon, Jo

2013-12-19

Television (TV) viewing, a prevalent leisure-time sedentary behaviour independently related to negative health outcomes, appears to be higher in less educated and older adults. In order to tackle the social inequalities, evidence is needed about the underlying mechanisms of the association between education and TV viewing. The present purpose was to examine the potential mediating role of personal, social and physical environmental factors in the relationship between education and TV viewing among Australian 55-65 year-old adults. In 2010, self-reported data was collected among 4082 adults (47.6% men) across urban and rural areas of Victoria, for the Wellbeing, Eating and Exercise for a Long Life (WELL) study. The mediating role of personal (body mass index [BMI], quality of life), social (social support from family and friends, social participation at proximal level, and interpersonal trust, social cohesion, personal safety at distal level) and physical environmental (neighbourhood aesthetics, neighbourhood physical activity environment, number of televisions) factors in the association between education and TV viewing time was examined using the product-of-coefficients test of MacKinnon based on multilevel linear regression analyses (conducted in 2012). Multiple mediating analyses showed that BMI (p ≤ 0.01), personal safety (p < 0.001), neighbourhood aesthetics (p ≤ 0.01) and number of televisions (p ≤ 0.01) partly explained the educational inequalities in older adult's TV viewing. No proximal social factors mediated the education-TV viewing association. Interventions aimed to reduce TV viewing should focus on personal (BMI) and environmental (personal safety, neighbourhood aesthetics, number of televisions) factors, in order to overcome educational inequalities in sedentary behaviour among older adults.

Theoretical and vibrational spectroscopic approach to keto-enol tautomerism in methyl-2-(4-methoxybenzoyl)-3-(4-methoxyphenyl)-3-oxopropanoylcarbamate

NASA Astrophysics Data System (ADS)

Arı, Hatice; Özpozan, Talat; Büyükmumcu, Zeki; Kabacalı, Yiğit; Saçmaci, Mustafa

2016-10-01

A carbamate compound having tricarbonyl groups, methyl-2-(4-methoxybenzoyl)-3-(4-methoxyphenyl)-3-oxopropanoylcarbamate (BPOC) was investigated from theoretical and vibrational spectroscopic point of view employing quantum chemical methods. Hybrid Density Functionals (B3LYP, X3LYP and B3PW91) with 6-311 G(d,p) basis set were used for the calculations. Rotational barrier and conformational analyses were performed to find the most stable conformers of keto and enol forms of the molecule. Three transition states for keto-enol tautomerism in gas phase were determined. The results of the calculations show that enol-1 form of BPOC is more stable than keto and enol-2 forms. Hydrogen bonding investigation including Natural bond orbital analysis (NBO) for all the tautomeric structures was employed to compare intra-molecular interactions. The energies of HOMO and LUMO molecular orbitals for all tautomeric forms of BPOC were predicted. Normal Coordinate Analysis (NCA) was carried out for the enol-1 to assign vibrational bands of IR and Raman spectra. The scaling factors were calculated as 0.9721, 0.9697 and 0.9685 for B3LYP, X3LYP and B3PW91 methods, respectively. The correlation graphs of experimental versus calculated vibrational wavenumbers were plotted and X3LYP method gave better frequency agreement than the others.

Radiative transfer code SHARM for atmospheric and terrestrial applications

NASA Astrophysics Data System (ADS)

Lyapustin, A. I.

2005-12-01

An overview of the publicly available radiative transfer Spherical Harmonics code (SHARM) is presented. SHARM is a rigorous code, as accurate as the Discrete Ordinate Radiative Transfer (DISORT) code, yet faster. It performs simultaneous calculations for different solar zenith angles, view zenith angles, and view azimuths and allows the user to make multiwavelength calculations in one run. The Δ-M method is implemented for calculations with highly anisotropic phase functions. Rayleigh scattering is automatically included as a function of wavelength, surface elevation, and the selected vertical profile of one of the standard atmospheric models. The current version of the SHARM code does not explicitly include atmospheric gaseous absorption, which should be provided by the user. The SHARM code has several built-in models of the bidirectional reflectance of land and wind-ruffled water surfaces that are most widely used in research and satellite data processing. A modification of the SHARM code with the built-in Mie algorithm designed for calculations with spherical aerosols is also described.

Radiative transfer code SHARM for atmospheric and terrestrial applications.

PubMed

Lyapustin, A I

2005-12-20

An overview of the publicly available radiative transfer Spherical Harmonics code (SHARM) is presented. SHARM is a rigorous code, as accurate as the Discrete Ordinate Radiative Transfer (DISORT) code, yet faster. It performs simultaneous calculations for different solar zenith angles, view zenith angles, and view azimuths and allows the user to make multiwavelength calculations in one run. The Delta-M method is implemented for calculations with highly anisotropic phase functions. Rayleigh scattering is automatically included as a function of wavelength, surface elevation, and the selected vertical profile of one of the standard atmospheric models. The current version of the SHARM code does not explicitly include atmospheric gaseous absorption, which should be provided by the user. The SHARM code has several built-in models of the bidirectional reflectance of land and wind-ruffled water surfaces that are most widely used in research and satellite data processing. A modification of the SHARM code with the built-in Mie algorithm designed for calculations with spherical aerosols is also described.

User's manual for CNVUFAC, the general dynamics heat-transfer radiation view factor program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wong, R. L.

CNVUFAC, the General Dynamics heat-transfer radiation veiw factor program, has been adapted for use on the LLL CDC 7600 computer system. The input and output have been modified, and a node incrementing logic was included to make the code compatible with the TRUMP thermal analyzer and related codes. The program performs the multiple integration necessary to evaluate the geometric black-body radiaton node to node view factors. Card image output that contains node number and view factor information is generated for input into the related program GRAY. Program GRAY is then used to include the effects of gray-body emissivities and multiplemore » reflections, generating the effective gray-body view factors usable in TRUMP. CNVUFAC uses an elemental area summation scheme to evaluate the multiple integrals. The program permits shadowing and self-shadowing. The basic configuration shapes that can be considered are cylinders, cones, spheres, ellipsoids, flat plates, disks, toroids, and polynomials of revolution. Portions of these shapes can also be considered.« less

Radial line method for rear-view mirror distortion detection

NASA Astrophysics Data System (ADS)

Rahmah, Fitri; Kusumawardhani, Apriani; Setijono, Heru; Hatta, Agus M.; Irwansyah, .

2015-01-01

An image of the object can be distorted due to a defect in a mirror. A rear-view mirror is an important component for the vehicle safety. One of standard parameters of the rear-view mirror is a distortion factor. This paper presents a radial line method for distortion detection of the rear-view mirror. The rear-view mirror was tested for the distortion detection by using a system consisting of a webcam sensor and an image-processing unit. In the image-processing unit, the captured image from the webcam were pre-processed by using smoothing and sharpening techniques and then a radial line method was used to define the distortion factor. It was demonstrated successfully that the radial line method could be used to define the distortion factor. This detection system is useful to be implemented such as in Indonesian's automotive component industry while the manual inspection still be used.

Simulation study of geometric shape factor approach to estimating earth emitted flux densities from wide field-of-view radiation measurements

NASA Technical Reports Server (NTRS)

Weaver, W. L.; Green, R. N.

1980-01-01

A study was performed on the use of geometric shape factors to estimate earth-emitted flux densities from radiation measurements with wide field-of-view flat-plate radiometers on satellites. Sets of simulated irradiance measurements were computed for unrestricted and restricted field-of-view detectors. In these simulations, the earth radiation field was modeled using data from Nimbus 2 and 3. Geometric shape factors were derived and applied to these data to estimate flux densities on global and zonal scales. For measurements at a satellite altitude of 600 km, estimates of zonal flux density were in error 1.0 to 1.2%, and global flux density errors were less than 0.2%. Estimates with unrestricted field-of-view detectors were about the same for Lambertian and non-Lambertian radiation models, but were affected by satellite altitude. The opposite was found for the restricted field-of-view detectors.

Method and computer program product for maintenance and modernization backlogging

DOEpatents

Mattimore, Bernard G; Reynolds, Paul E; Farrell, Jill M

2013-02-19

According to one embodiment, a computer program product for determining future facility conditions includes a computer readable medium having computer readable program code stored therein. The computer readable program code includes computer readable program code for calculating a time period specific maintenance cost, for calculating a time period specific modernization factor, and for calculating a time period specific backlog factor. Future facility conditions equal the time period specific maintenance cost plus the time period specific modernization factor plus the time period specific backlog factor. In another embodiment, a computer-implemented method for calculating future facility conditions includes calculating a time period specific maintenance cost, calculating a time period specific modernization factor, and calculating a time period specific backlog factor. Future facility conditions equal the time period specific maintenance cost plus the time period specific modernization factor plus the time period specific backlog factor. Other embodiments are also presented.

Theoretical investigation on thermoelectric properties of (Ca,Sr,Ba)Fe2(As/Bi)2 compounds under temperature

NASA Astrophysics Data System (ADS)

Jayalakshmi, D. S.; Sundareswari, M.; Viswanathan, E.; Das, Abhijeet

2018-04-01

The electrical conductivity, resistivity and Seebeck coefficient, Pauli magnetic susceptibility and power factor are computed under temperature (100 K - 800 K) in steps of 100 K for the theoretically designed compounds namely (Ca,Sr,Ba)Fe2Bi2 and their parent compounds namely (Ca,Sr,Ba)Fe2As2 by using Boltzmann transport theory interfaced to the Wien2k program. The Bulk modulus, electron phonon coupling constant, thermoelectric figure of merit (ZT) and transition temperature are calculated for the optimized anti ferromagnetic phase of the proposed compounds. The results are discussed for the novel compounds in view of their superconductivity existence and compared with their parent unconventional superconducting compounds.

Tuning the interaction between propagating and localized surface plasmons for surface enhanced Raman scattering in water for biomedical and environmental applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shioi, Masahiko, E-mail: shioi.masahiko@jp.panasonic.com; Department of Electric and Electronic Engineering, Graduate School of Engineering, Kobe University, Rokkodai, Nada, Kobe 657-8501; Jans, Hilde

With a view to biomedical and environmental applications, we investigate the plasmonic properties of a rectangular gold nanodisk array in water to boost surface enhanced Raman scattering (SERS) effects. To control the resonance wavelengths of the surface plasmon polariton and the localized surface plasmon, their dependence on the array period and diameter in water is studied in detail using a finite difference time domain method. A good agreement is obtained between calculated resonant wavelengths and those of gold nanodisk arrays fabricated using electron beam lithography. For the optimized structure, a SERS enhancement factor of 7.8 × 10{sup 7} is achieved in watermore » experimentally.« less

Current risk estimates based on the A-bomb survivors data - a discussion in terms of the ICRP recommendations on the neutron weighting factor.

PubMed

Rühm, W; Walsh, L

2007-01-01

Currently, most analyses of the A-bomb survivors' solid tumour and leukaemia data are based on a constant neutron relative biological effectiveness (RBE) value of 10 that is applied to all survivors, independent of their distance to the hypocentre at the time of bombing. The results of these analyses are then used as a major basis for current risk estimates suggested by the International Commission on Radiological Protection (ICRP) for use in international safety guidelines. It is shown here that (i) a constant value of 10 is not consistent with weighting factors recommended by the ICRP for neutrons and (ii) it does not account for the hardening of the neutron spectra in Hiroshima and Nagasaki, which takes place with increasing distance from the hypocentres. The purpose of this paper is to present new RBE values for the neutrons, calculated as a function of distance from the hypocentres for both cities that are consistent with the ICRP60 neutron weighting factor. If based on neutron spectra from the DS86 dosimetry system, these calculations suggest values of about 31 at 1000 m and 23 at 2000 m ground range in Hiroshima, while the corresponding values for Nagasaki are 24 and 22. If the neutron weighting factor that is consistent with ICRP92 is used, the corresponding values are about 23 and 21 for Hiroshima and 21 and 20 for Nagasaki, respectively. It is concluded that the current risk estimates will be subject to some changes in view of the changed RBE values. This conclusion does not change significantly if the new doses from the Dosimetry System DS02 are used.

Left ventricular pressure and volume data acquisition and analysis using LabVIEW.

PubMed

Cassidy, S C; Teitel, D F

1997-03-01

To automate analysis of left ventricular pressure-volume data, we used LabVIEW to create applications that digitize and display data recorded from conductance and manometric catheters. Applications separate data into cardiac cycles, calculate parallel conductance, and calculate indices of left ventricular function, including end-systolic elastance, preload-recruitable stroke work, stroke volume, ejection fraction, stroke work, maximum and minimum derivative of ventricular pressure, heart rate, indices of relaxation, peak filling rate, and ventricular chamber stiffness. Pressure-volume loops can be graphically displayed. These analyses are exported to a text-file. These applications have simplified and automated the process of evaluating ventricular function.

Serial Changes in 3-Dimensional Supraspinatus Muscle Volume After Rotator Cuff Repair.

PubMed

Chung, Seok Won; Oh, Kyung-Soo; Moon, Sung Gyu; Kim, Na Ra; Lee, Ji Whan; Shim, Eungjune; Park, Sehyung; Kim, Youngjun

2017-08-01

There is considerable debate on the recovery of rotator cuff muscle atrophy after rotator cuff repair. To evaluate the serial changes in supraspinatus muscle volume after rotator cuff repair by using semiautomatic segmentation software and to determine the relationship with functional outcomes. Case series; Level of evidence, 4. Seventy-four patients (mean age, 62.8 ± 8.8 years) who underwent arthroscopic rotator cuff repair and obtained 3 consecutive (preoperatively, immediately postoperatively, and later postoperatively [≥1 year postoperatively]) magnetic resonance imaging (MRI) scans having complete Y-views were included. We generated a 3-dimensional (3D) reconstructed model of the supraspinatus muscle by using in-house semiautomatic segmentation software (ITK-SNAP) and calculated both the 2-dimensional (2D) cross-sectional area and 3D volume of the muscle in 3 different views (Y-view, 1 cm medial to the Y-view [Y+1 view], and 2 cm medial to the Y-view [Y+2 view]) at the 3 time points. The area and volume changes at each time point were evaluated according to repair integrity. Later postoperative volumes were compared with immediately postoperative volumes, and their relationship with various clinical factors and the effect of higher volume increases on range of motion, muscle power, and visual analog scale pain and American Shoulder and Elbow Surgeons scores were evaluated. The interrater reliabilities were excellent for all measurements. Areas and volumes increased immediately postoperatively as compared with preoperatively; however, only volumes on the Y+1 view and Y+2 view significantly increased later postoperatively as compared with immediately postoperatively ( P < .05). There were 9 patients with healing failure, and area and volume changes were significantly less later postoperatively compared with immediately postoperatively at all measurement points in these patients ( P < .05). After omitting the patients with healing failure, volume increases later postoperatively became more prominent ( P < .05) in the order of the Y+2 view, Y+1 view, and Y-view. Volume increases were higher in patients who healed successfully with larger tears ( P = .040). Higher volume increases were associated only with an increase in abduction power ( P = .029) and not with other outcomes. The supraspinatus muscle volume increased immediately postoperatively and continuously for at least 1 year after surgery. The increase was evident in patients who had larger tears and healed successfully and when measured toward the more medial portion of the supraspinatus muscle. The volume increases were associated with an increase in shoulder abduction power.

Evaluation of target coverage and margins adequacy during CyberKnife Lung Optimized Treatment.

PubMed

Ricotti, Rosalinda; Seregni, Matteo; Ciardo, Delia; Vigorito, Sabrina; Rondi, Elena; Piperno, Gaia; Ferrari, Annamaria; Zerella, Maria Alessia; Arculeo, Simona; Francia, Claudia Maria; Sibio, Daniela; Cattani, Federica; De Marinis, Filippo; Spaggiari, Lorenzo; Orecchia, Roberto; Riboldi, Marco; Baroni, Guido; Jereczek-Fossa, Barbara Alicja

2018-04-01

Evaluation of target coverage and verification of safety margins, in motion management strategies implemented by Lung Optimized Treatment (LOT) module in CyberKnife system. Three fiducial-less motion management strategies provided by LOT can be selected according to tumor visibility in the X ray images acquired during treatment. In 2-view modality the tumor is visible in both X ray images and full motion tracking is performed. In 1-view modality the tumor is visible in a single X ray image, therefore, motion tracking is combined with an internal target volume (ITV)-based margin expansion. In 0-view modality the lesion is not visible, consequently the treatment relies entirely on an ITV-based approach. Data from 30 patients treated in 2-view modality were selected providing information on the three-dimensional tumor motion in correspondence to each X ray image. Treatments in 1-view and 0-view modalities were simulated by processing log files and planning volumes. Planning target volume (PTV) margins were defined according to the tracking modality: end-exhale clinical target volume (CTV) + 3 mm in 2-view and ITV + 5 mm in 0-view. In the 1-view scenario, the ITV encompasses only tumor motion along the non-visible direction. Then, non-uniform ITV to PTV margins were applied: 3 mm and 5 mm in the visible and non-visible direction, respectively. We defined the coverage of each voxel of the CTV as the percentage of X ray images where such voxel was included in the PTV. In 2-view modality coverage was calculated as the intersection between the CTV centred on the imaged target position and the PTV centred on the predicted target position, as recorded in log files. In 1-view modality, coverage was calculated as the intersection between the CTV centred on the imaged target position and the PTV centred on the projected predictor data. In 0-view modality coverage was calculated as the intersection between the CTV centred on the imaged target position and the non-moving PTV. Similar to dose-volume histogram, CTV coverage-volume histograms (defined as CVH) were derived for each patient and treatment modality. The geometric coverages of the 90% and 95% of CTV volume (C90, C95, respectively) were evaluated. Patient-specific optimal margins (ensuring C95 ≥ 95%) were computed retrospectively. The median ± interquartile-rage of C90 and C95 for upper lobe lesions was 99.1 ± 0.6% and 99.0 ± 3.1%, whereas they were 98.9 ± 4.2% and 97.8 ± 7.5% for lower and middle lobe tumors. In 2-view, 1-view and 0-view modality, adopted margins ensured C95 ≥ 95% in 70%, 85% and 63% of cases and C95 ≥ 90% in 90%, 88% and 83% of cases, respectively. In 2-view, 1-view and 0-view a reduction in margins still ensured C95 ≥ 95% in 33%, 78% and 59% of cases, respectively. CTV coverage analysis provided an a-posteriori evaluation of the treatment geometric accuracy and allowed a quantitative verification of the adequacy of the PTV margins applied in CyberKnife LOT treatments offering guidance in the selection of CTV margins. © 2018 American Association of Physicists in Medicine.

Computer-Generated Microwave Holograms.

ERIC Educational Resources Information Center

Leming, Charles W.; Hastings, Orestes Patterson, III

1980-01-01

Described is the phasor method of superposition of waves. The intensity pattern from a system of microwave sources is calculated point by point on a plane corresponding to a film emulsion, and then printed and directly converted to a hologram for 3-cm microwaves. Calculations, construction, and viewing of holograms are included. (Author/DS)

Scale factor gage for fiber optics inspection device

NASA Technical Reports Server (NTRS)

Mcmahon, W.; Sugg, F. E.

1971-01-01

Flexible wire device, fastened along outside of fiber bundle from viewing portion to tip, positions calibrated adjustable gage in field of view. Scale factor is determined from known magnification characteristics of fiber optics system or from graduations on gage tip.

Designing the X-Ray Microcalorimeter Spectrometer for Optimal Science Return

NASA Technical Reports Server (NTRS)

Ptak, Andrew; Bandler, Simon R.; Bookbinder, Jay; Kelley, Richard L.; Petre, Robert; Smith, Randall K.; Smith, Stephen

2013-01-01

Recent advances in X-ray microcalorimeters enable a wide range of possible focal plane designs for the X-ray Microcalorimeter Spectrometer (XMS) instrument on the future Advanced X-ray Spectroscopic Imaging Observatory (AXSIO) or X-ray Astrophysics Probe (XAP). Small pixel designs (75 microns) oversample a 5-10" PSF by a factor of 3-6 for a 10 m focal length, enabling observations at both high count rates and high energy resolution. Pixel designs utilizing multiple absorbers attached to single transition-edge sensors can extend the focal plane to cover a significantly larger field of view, albeit at a cost in maximum count rate and energy resolution. Optimizing the science return for a given cost and/or complexity is therefore a non-trivial calculation that includes consideration of issues such as the mission science drivers, likely targets, mirror size, and observing efficiency. We present a range of possible designs taking these factors into account and their impacts on the science return of future large effective-area X-ray spectroscopic missions.

Thematic mapper research in the earth sciences: Small scale patches of suspended matter and phytoplankton in the Elbe River Estuary, German Bight and Tidal Flats

NASA Technical Reports Server (NTRS)

Grassl, H.; Doerffer, R.; Fischer, J.; Brockmann, C.; Stoessel, M.

1987-01-01

A Thematic Mapper (TM) field experiment was followed by a data analysis to determine TM capabilities for analysis of suspended matter and phytoplankton. Factor analysis showed that suspended matter concentration, atmospheric scattering, and sea surface temperature can be retrieved as independent factors which determine the variation in the TM data over water areas. Spectral channels in the near infrared open the possibility of determining the Angstrom exponent better than for the coastal zone color scanner. The suspended matter distribution may then be calculated by the absolute radiance of channel 2 or 3 or the ratio of both. There is no indication of whether separation of chlorophyll is possible. The distribution of suspended matter and sea surface temperature can be observed with the expected fine structure. A good correlation between water depth and suspended matter distribution as found from ship data can now be analyzed for an entire area by the synoptic view of the TM scenes.

Assessment of sustainable urban transport development based on entropy and unascertained measure

PubMed Central

Li, Yancang; Yang, Jing; Li, Yijie

2017-01-01

To find a more effective method for the assessment of sustainable urban transport development, the comprehensive assessment model of sustainable urban transport development was established based on the unascertained measure. On the basis of considering the factors influencing urban transport development, the comprehensive assessment indexes were selected, including urban economical development, transport demand, environment quality and energy consumption, and the assessment system of sustainable urban transport development was proposed. In view of different influencing factors of urban transport development, the index weight was calculated through the entropy weight coefficient method. Qualitative and quantitative analyses were conducted according to the actual condition. Then, the grade was obtained by using the credible degree recognition criterion from which the urban transport development level can be determined. Finally, a comprehensive assessment method for urban transport development was introduced. The application practice showed that the method can be used reasonably and effectively for the comprehensive assessment of urban transport development. PMID:29084281

Empirical test of the spectral invariants theory using imaging spectroscopy data from a coniferous forest

NASA Astrophysics Data System (ADS)

Lukeš, Petr; Rautiainen, Miina; Stenberg, Pauline; Malenovský, Zbyněk

2011-08-01

The spectral invariants theory presents an alternative approach for modeling canopy scattering in remote sensing applications. The theory is particularly appealing in the case of coniferous forests, which typically display grouped structures and require computationally intensive calculation to account for the geometric arrangement of their canopies. However, the validity of the spectral invariants theory should be tested with empirical data sets from different vegetation types. In this paper, we evaluate a method to retrieve two canopy spectral invariants, the recollision probability and the escape factor, for a coniferous forest using imaging spectroscopy data from multiangular CHRIS PROBA and NADIR-view AISA Eagle sensors. Our results indicated that in coniferous canopies the spectral invariants theory performs well in the near infrared spectral range. In the visible range, on the other hand, the spectral invariants theory may not be useful. Secondly, our study suggested that retrieval of the escape factor could be used as a new method to describe the BRDF of a canopy.

Exposure to carcinogenic polycyclic aromatic compounds and health risk assessment for diesel-exhaust exposed workers.

PubMed

Sauvain, J-J; Vu Duc, T; Guillemin, M

2003-07-01

Workers' exposure to diesel exhaust in a bus depot, a truck repair workshop and an underground tunnel was determined by the measuring of elemental carbon (EC) and 15 carcinogenic polycyclic aromatic compounds (PACs) proposed by the US Department of Health and Human Services/National Toxicology Program (NTP). Based on these concentration data, the genotoxic PAC contribution to the diesel-exhaust particle (DEP) lung-cancer risk was calculated. Respirable particulate matter was collected during the summer and winter of 2001 (except for in the underground situation) and analysed by coulometry for EC and by GC-MS methods for PACs. The use of potency equivalence factors (PEFs) allowed the studied PAC concentrations to be expressed as benzo[a]pyrene equivalents (B[a]P(eq)). We then calculated the lung-cancer risk due to PACs and DEPs by multiplying the B[a]P(eq) and EC concentrations by the corresponding unit risk factor. The ratio of these two risks values has been considered as an estimate of the genotoxic contribution to the DEP cancer risk. For the bus depot and truck repair workshop, exposure to EC and PACs has been shown to increase by three to six times and ten times, respectively, during winter compared to summer. This increase has been attributed mainly to a decrease in ventilation during the cold. With the PEF approach, the B[a]P(eq) concentration is five-times higher than if only benzo[ a]pyrene (B[a]P) is considered. Dibenzopyrenes contribute an important part to this increase. A simple calculation based on unit risk factors indicates that the studied PAC contribution to the total lung-cancer risk attributed to DEPs is in the range of 3-13%. The 15 NTP PACs represent a small but non-negligible part of lung-cancer risk with regard to diesel exposure. From this point of view, the dibenzopyrene family are important compounds to be considered.

Pinyon, Version 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ward, Logan; Hackenberg, Robert

2017-02-13

Pinyon is a tool that stores steps involved in creating a model derived from a collection of data. The main function of Pinyon is to store descriptions of calculations used to analyze or visualize the data in a database, and allow users to view the results of these calculations via a web interface. Additionally, users may also use the web interface to make adjustments to the calculations and rerun the entire collection of analysis steps automatically.

Mars Exploration Rovers Landing Dispersion Analysis

NASA Technical Reports Server (NTRS)

Knocke, Philip C.; Wawrzyniak, Geoffrey G.; Kennedy, Brian M.; Desai, Prasun N.; Parker, TImothy J.; Golombek, Matthew P.; Duxbury, Thomas C.; Kass, David M.

2004-01-01

Landing dispersion estimates for the Mars Exploration Rover missions were key elements in the site targeting process and in the evaluation of landing risk. This paper addresses the process and results of the landing dispersion analyses performed for both Spirit and Opportunity. The several contributors to landing dispersions (navigation and atmospheric uncertainties, spacecraft modeling, winds, and margins) are discussed, as are the analysis tools used. JPL's MarsLS program, a MATLAB-based landing dispersion visualization and statistical analysis tool, was used to calculate the probability of landing within hazardous areas. By convolving this with the probability of landing within flight system limits (in-spec landing) for each hazard area, a single overall measure of landing risk was calculated for each landing ellipse. In-spec probability contours were also generated, allowing a more synoptic view of site risks, illustrating the sensitivity to changes in landing location, and quantifying the possible consequences of anomalies such as incomplete maneuvers. Data and products required to support these analyses are described, including the landing footprints calculated by NASA Langley's POST program and JPL's AEPL program, cartographically registered base maps and hazard maps, and flight system estimates of in-spec landing probabilities for each hazard terrain type. Various factors encountered during operations, including evolving navigation estimates and changing atmospheric models, are discussed and final landing points are compared with approach estimates.

An experimental investigation devoted to determine heat transfer characteristics in a radiant ceiling heating system

NASA Astrophysics Data System (ADS)

Koca, Aliihsan; Acikgoz, Ozgen; Çebi, Alican; Çetin, Gürsel; Dalkilic, Ahmet Selim; Wongwises, Somchai

2018-02-01

Investigations on heated ceiling method can be considered as a new research area in comparison to the common wall heating-cooling and cooled ceiling methods. In this work, heat transfer characteristics of a heated radiant ceiling system was investigated experimentally. There were different configurations for a single room design in order to determine the convective and radiative heat transfer rates. Almost all details on the arrangement of the test chamber, hydraulic circuit and radiant panels, the measurement equipment and experimental method including uncertainty analysis were revealed in detail indicating specific international standards. Total heat transfer amount from the panels were calculated as the sum of radiation to the unheated surfaces, convection to the air, and conduction heat loss from the backside of the panels. Integral expression of the view factors was calculated by means of the numerical evaluations using Matlab code. By means of this experimental chamber, the radiative, convective and total heat-transfer coefficient values along with the heat flux values provided from the ceiling to the unheated surrounding surfaces have been calculated. Moreover, the details of 28 different experimental case study measurements from the experimental chamber including the convective, radiative and total heat flux, and heat output results are given in a Table for other researchers to validate their theoretical models and empirical correlations.

Application Profile Matching Method for Employees Online Recruitment

NASA Astrophysics Data System (ADS)

Sunarti; Rangga, Rahmadian Y.; Marlim, Yulvia Nora

2017-12-01

Employees is one of the determinant factors of company’s success. Thus, reliable human resources are needed to support the survival of the company. This research takes case study at PT. Asuransi Bina Dana Arta, Tbk Pekanbaru Branch. Employee recruitment system at PT. Asuransi Bina Dana Arta, Tbk Pekanbaru Branch still uses manual system as seen in application letter files file so it needs long time to determine accepted and rejected the application. For that it needs to built a system or application that allows companies in determining employees who accepted or rejected easily. Pofile Matching Method is a process of competency assessment that is done by comparing the value of written, psychological and interview test between one applicationt with other. PT. Asuransi Bina Dana Arta, Tbk Pekanbaru branch set the percentage to calculate NCF (Core Factor Value) by 60% and NSF (Secondary Factor Value) by 40%, and set the percentage to calculate the total value of written test by 40%, the total value of psycho test by 30%, and the total value of interview 30%. The final result of this study is to determine the rank or ranking of each applicant based on the greater value which, the greater that score of final result of an application get, the greater the chance of the applicant occupy a position or vacancy. Online Recruitment application uses profile matching method can help employee selection process and employee acceptance decisions quickly. This system can be viewed by directors or owners anywhere because it is online and used for other company branch

Importance of sexuality in colorectal cancer: predictors, changes, and response to an intimacy enhancement intervention.

PubMed

Reese, Jennifer Barsky; Haythornthwaite, Jennifer A

2016-10-01

The primary objectives were (1) to examine the importance of sexuality within the self-view and cross-sectional correlates for 120 colorectal cancer patients and (2) to determine whether the importance of sexuality changed for 46 colorectal cancer patients and partners participating in an intimacy enhancement intervention. Two newly developed items assessed importance of sexuality within the self-view (1) currently and (2) before cancer; a calculated change score assessed perceived change. In the cross-sectional sample, associations between importance of sexuality and demographic and medical factors and sexual function status were examined. Intervention participants' importance ratings before and after participation were used to calculate effect sizes. For patients, importance of sexuality before cancer was greater (M = 65.7) than current importance (M = 56.8, p = .001). Greater current importance of sexuality was associated with partnered status, non-metastatic disease, and not being in treatment. Scoring in the sexually functional range was associated with greater current importance of sexuality for men and a smaller perceived change in importance for both men and women (p values <.05). Sexual function status also significantly predicted current importance independent of covariates. Small to medium effect sizes for intervention patients (.37) and partners (.60) were found for increases in importance of sexuality. Items showed evidence of test-retest reliability and construct validity. Coping with sexual concerns is important to those affected by colorectal cancer. Findings suggest that the importance of sexuality can decrease through colorectal cancer and associated sexual problems and can increase through participating in an intimacy-focused intervention.

An Evaluation Quality Framework for Analysing School-Based Learning (SBL) to Work-Based Learning (WBL) Transition Module

NASA Astrophysics Data System (ADS)

Alseddiqi, M.; Mishra, R.; Pislaru, C.

2012-05-01

The paper presents the results from a quality framework to measure the effectiveness of a new engineering course entitled 'school-based learning (SBL) to work-based learning (WBL) transition module' in the Technical and Vocational Education (TVE) system in Bahrain. The framework is an extended version of existing information quality frameworks with respect to pedagogical and technological contexts. It incorporates specific pedagogical and technological dimensions as per the Bahrain modern industry requirements. Users' views questionnaire on the effectiveness of the new transition module was distributed to various stakeholders including TVE teachers and students. The aim was to receive critical information in diagnosing, monitoring and evaluating different views and perceptions about the effectiveness of the new module. The analysis categorised the quality dimensions by their relative importance. This was carried out using the principal component analysis available in SPSS. The analysis clearly identified the most important quality dimensions integrated in the new module for SBL-to-WBL transition. It was also apparent that the new module contains workplace proficiencies, prepares TVE students for work placement, provides effective teaching and learning methodologies, integrates innovative technology in the process of learning, meets modern industrial needs, and presents a cooperative learning environment for TVE students. From the principal component analysis finding, to calculate the percentage of relative importance of each factor and its quality dimensions, was significant. The percentage comparison would justify the most important factor as well as the most important quality dimensions. Also, the new, re-arranged quality dimensions from the finding with an extended number of factors tended to improve the extended version of the quality information framework to a revised quality framework.

Kinematics of Parsec-scale Jets of Gamma-Ray Blazars at 43 GHz within the VLBA-BU-BLAZAR Program

NASA Astrophysics Data System (ADS)

Jorstad, Svetlana G.; Marscher, Alan P.; Morozova, Daria A.; Troitsky, Ivan S.; Agudo, Iván; Casadio, Carolina; Foord, Adi; Gómez, José L.; MacDonald, Nicholas R.; Molina, Sol N.; Lähteenmäki, Anne; Tammi, Joni; Tornikoski, Merja

2017-09-01

We analyze the parsec-scale jet kinematics from 2007 June to 2013 January of a sample of γ-ray bright blazars monitored roughly monthly with the Very Long Baseline Array at 43 GHz. In a total of 1929 images, we measure apparent speeds of 252 emission knots in 21 quasars, 12 BL Lacertae objects (BLLacs), and 3 radio galaxies, ranging from 0.02c to 78c; 21% of the knots are quasi-stationary. Approximately one-third of the moving knots execute non-ballistic motions, with the quasars exhibiting acceleration along the jet within 5 pc (projected) of the core, and knots in BLLacs tending to decelerate near the core. Using the apparent speeds of the components and the timescales of variability from their light curves, we derive the physical parameters of 120 superluminal knots, including variability Doppler factors, Lorentz factors, and viewing angles. We estimate the half-opening angle of each jet based on the projected opening angle and scatter of intrinsic viewing angles of knots. We determine characteristic values of the physical parameters for each jet and active galactic nucleus class based on the range of values obtained for individual features. We calculate the intrinsic brightness temperatures of the cores, {T}{{b},{int}}{core}, at all epochs, finding that the radio galaxies usually maintain equipartition conditions in the cores, while ˜30% of {T}{{b},{int}}{core} measurements in the quasars and BLLacs deviate from equipartition values by a factor >10. This probably occurs during transient events connected with active states. In the Appendix, we briefly describe the behavior of each blazar during the period analyzed.

Association of Sedentary Behavior Time with Ideal Cardiovascular Health: The ORISCAV-LUX Study

PubMed Central

Crichton, Georgina E.; Alkerwi, Ala'a

2014-01-01

Background Recently attention has been drawn to the health impacts of time spent engaging in sedentary behaviors. No studies have examined sedentary behaviors in relation to the newly defined construct of ideal cardiovascular health, which incorporates three health factors (blood pressure, total cholesterol, fasting plasma glucose) and four behaviors (physical activity, smoking, body mass index, diet). The purpose of this study was to examine associations between sedentary behaviors, including sitting time, and time spent viewing television and in front of a computer, with cardiovascular health, in a representative sample of adults from Luxembourg. Methods A cross-sectional analysis of 1262 participants in the Observation of Cardiovascular Risk Factors in Luxembourg study was conducted, who underwent objective cardiovascular health assessments and completed the International Physical Activity Questionnaire. A Cardiovascular Health Score was calculated based on the number of health factors and behaviors at ideal levels. Sitting time on a weekday, television time, and computer time (both on a workday and a day off), were related to the Cardiovascular Health Score. Results Higher weekday sitting time was significantly associated with a poorer Cardiovascular Health Score (p = 0.002 for linear trend), after full adjustment for age, gender, education, income and occupation. Television time was inversely associated with the Cardiovascular Health Score, on both a workday and a day off (p = 0.002 for both). A similar inverse relationship was observed between the Cardiovascular Health Score and computer time, only on a day off (p = 0.04). Conclusion Higher time spent sitting, viewing television, and using a computer during a day off may be unfavorably associated with ideal cardiovascular health. PMID:24925084

Directional effects on NDVI and LAI retrievals from MODIS: A case study in Brazil with soybean

NASA Astrophysics Data System (ADS)

Breunig, Fábio Marcelo; Galvão, Lênio Soares; Formaggio, Antônio Roberto; Epiphanio, José Carlos Neves

2011-02-01

The Moderate Resolution Imaging Spectroradiometer (MODIS) is largely used to estimate Leaf Area Index (LAI) using radiative transfer modeling (the "main" algorithm). When this algorithm fails for a pixel, which frequently occurs over Brazilian soybean areas, an empirical model (the "backup" algorithm) based on the relationship between the Normalized Difference Vegetation Index (NDVI) and LAI is utilized. The objective of this study is to evaluate directional effects on NDVI and subsequent LAI estimates using global (biome 3) and local empirical models, as a function of the soybean development in two growing seasons (2004-2005 and 2005-2006). The local model was derived from the pixels that had LAI values retrieved from the main algorithm. In order to keep the reproductive stage for a given cultivar as a constant factor while varying the viewing geometry, pairs of MODIS images acquired in close dates from opposite directions (backscattering and forward scattering) were selected. Linear regression relationships between the NDVI values calculated from these two directions were evaluated for different view angles (0-25°; 25-45°; 45-60°) and development stages (<45; 45-90; >90 days after planting). Impacts on LAI retrievals were analyzed. Results showed higher reflectance values in backscattering direction due to the predominance of sunlit soybean canopy components towards the sensor and higher NDVI values in forward scattering direction due to stronger shadow effects in the red waveband. NDVI differences between the two directions were statistically significant for view angles larger than 25°. The main algorithm for LAI estimation failed in the two growing seasons with gradual crop development. As a result, up to 94% of the pixels had LAI values calculated from the backup algorithm at the peak of canopy closure. Most of the pixels selected to compose the 8-day MODIS LAI product came from the forward scattering view because it displayed larger LAI values than the backscattering. Directional effects on the subsequent LAI retrievals were stronger at the peak of the soybean development (NDVI values between 0.70 and 0.85). When the global empirical model was used, LAI differences up to 3.2 for consecutive days and opposite viewing directions were observed. Such differences were reduced to values up to 1.5 with the local model. Because of the predominance of LAI retrievals from the MODIS backup algorithm during the Brazilian soybean development, care is necessary if one considers using these data in agronomic growing/yield models.

Quantification of Mesophyll Resistance and Apoplastic Ascorbic Acid as an Antioxidant for Tropospheric Ozone in Durum Wheat (Triticum durum Desf. cv. Camacho)

PubMed Central

de la Torre, Daniel

2008-01-01

The daily variations in cellular and apoplastic ascorbic acid and dehydroascorbic acid levels in a Mediterranean durum wheat cultivar (Triticum durum Desf. cv. Camacho) were analyzed in order to relate them to ambient ozone exposure and to subsequent stomatally absorbed ozone fluxes. The aim of this study is to prove the effectiveness and accuracy of a computer model (SODA) to calculate the mesophyll resistance (rm) to ozone uptake, the percentage of ozone detoxification by apoplastic ascorbic acid, and the ozone flux to the plasmalemma (Fm) in a Mediterranean durum wheat cultivar. These calculated factors were related to apoplastic ascorbic acid levels and to ambient ozone concentrations. These relationships were obtained with a view to explaining the detoxification of ozone by apoplastic ascorbic acid. Ozone detoxifications of up to 52% were found at midday, when maximum ozone concentrations and maximum apoplastic ascorbic acid are seen. Mesophyll resistance was minimum at this time, and ozone flux to the plasmalemma was reduced because of the reaction of ozone with apoplastic ascorbic acid. PMID:19082416

Quantification of mesophyll resistance and apoplastic ascorbic acid as an antioxidant for tropospheric ozone in durum wheat (Triticum durum Desf. cv. Camacho).

PubMed

de la Torre, Daniel

2008-12-14

The daily variations in cellular and apoplastic ascorbic acid and dehydroascorbic acid levels in a Mediterranean durum wheat cultivar (Triticum durum Desf. cv. Camacho) were analyzed in order to relate them to ambient ozone exposure and to subsequent stomatally absorbed ozone fluxes. The aim of this study is to prove the effectiveness and accuracy of a computer model (SODA) to calculate the mesophyll resistance (rm) to ozone uptake, the percentage of ozone detoxification by apoplastic ascorbic acid, and the ozone flux to the plasmalemma (Fm) in a Mediterranean durum wheat cultivar. These calculated factors were related to apoplastic ascorbic acid levels and to ambient ozone concentrations. These relationships were obtained with a view to explaining the detoxification of ozone by apoplastic ascorbic acid. Ozone detoxifications of up to 52% were found at midday, when maximum ozone concentrations and maximum apoplastic ascorbic acid are seen. Mesophyll resistance was minimum at this time, and ozone flux to the plasmalemma was reduced because of the reaction of ozone with apoplastic ascorbic acid.

Computer simulation of rapid crystal growth under microgravity

NASA Astrophysics Data System (ADS)

Hisada, Yasuhiro; Saito, Osami; Mitachi, Koshi; Nishinaga, Tatau

We are planning to grow a Ge single crystal under microgravity by the TR-IA rocket in 1992. The furnace temperature should be controlled so as to finish the crystal growth in a quite short time interval (about 6 min). This study deals with the computer simulation of rapid crystal growth in space to find the proper conditions for the experiment. The crystal growth process is influenced by various physical phenomena such as heat conduction, natural and Marangoni convections, phase change, and radiation from the furnace. In this study, a 2D simulation with axial symmetry is carried out, taking into account the radiation field with a specific temperature distribution of the furnace wall. The simulation program consists of four modules. The first module is applied for the calculation of the parabolic partial differential equation by using the control volume method. The second one evaluates implicitly the phase change by the enthalpy method. The third one is for computing the heat flux from surface by radiation. The last one is for calculating with the Monte Carlo method the view factors which are necessary to obtain the heat flux.

Reassessment of True Core Collapse Differential Pressure Values for Filter Elements in Safety Critical Environments - 13076

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swain, Adam

2013-07-01

As the areas of application for diverse filter types increases, the mechanics and material sciences associated with the hardware and its relationship with more and more arduous process environments becomes critical to the successful and reliable operation of the filtration equipment. Where the filter is the last safe barrier between the process and the life environment, structural integrity and reliability is paramount in both the validation and the ethical acceptability of the designed equipment. Core collapse is a key factor influencing filter element selection, and is an extremely complex issue with a number of variables and failure mechanisms. It ismore » becoming clear that the theory behind core collapse calculations is not always supported with real tested data. In exploring this issue we have found that the calculation method is not always reflective of the true as tested collapse value, with the calculated values being typically in excess or even an order of magnitude higher than the tested values. The above claim is supported by a case study performed by the author, which disproves most of what was previously understood to be true. This paper also aims to explore the various failure mechanisms of different configurations of filter core, comparing calculated collapse values against real tested values, with a view to understanding a method of calculating their true collapse value. As the technology is advancing, and filter elements are being used in higher temperature, higher pressure, more radioactive and more chemically aggressive environments, confidence in core collapse values and data is crucial. (authors)« less

Radiometric Cross-Calibration of the HJ-1B IRS in the Thermal Infrared Spectral Band

NASA Astrophysics Data System (ADS)

Sun, K.

2012-12-01

The natural calamities occur continually, environment pollution and destruction in a severe position on the earth presently, which restricts societal and economic development. The satellite remote sensing technology has an important effect on improving surveillance ability of environment pollution and natural calamities. The radiometric calibration is precondition of quantitative remote sensing; which accuracy decides quality of the retrieval parameters. Since the China Environment Satellite (HJ-1A/B) has been launched successfully on September 6th, 2008, it has made an important role in the economic development of China. The satellite has four infrared bands; and one of it is thermal infrared. With application fields of quantitative remote sensing in china, finding appropriate calibration method becomes more and more important. Many kinds of independent methods can be used to do the absolute radiometric calibration. In this paper, according to the characteristic of thermal infrared channel of HJ-1B thermal infrared multi-spectral camera, the thermal infrared spectral band of HJ-1B IRS was calibrated using cross-calibration methods based on MODIS data. Firstly, the corresponding bands of the two sensors were obtained. Secondly, the MONDTRAN was run to analyze the influences of different spectral response, satellite view zenith angle, atmosphere condition and temperature on the match factor. In the end, their band match factor was calculated in different temperature, considering the dissimilar band response of the match bands. Seven images of Lake Qinghai in different time were chosen as the calibration data. On the basis of radiance of MODIS and match factor, the IRS radiance was calculated. And then the calibration coefficients were obtained by linearly regressing the radiance and the DN value. We compared the result of this cross-calibration with that of the onboard blackbody calibration, which consistency was good.The maximum difference of brightness temperature between HJ-1B IRS band4 and MODIS band 31 is less than 1 K. Therefore cross-calibration is a rapid and financial way to get calibration coefficients of HJ-1B, however, the matched factor calculation method need further research in order to further improve cross-calibration precision.

Visual Costs of the Inhomogeneity of Luminance and Contrast by Viewing LCD-TFT Screens Off-Axis.

PubMed

Ziefle, Martina; Groeger, Thomas; Sommer, Dietmar

2003-01-01

In this study the anisotropic characteristics of TFT-LCD (Thin-Film-Transistor-Liquid Crystal Display) screens were examined. Anisotropy occurs as the distribution of luminance and contrast changes over the screen surface due to different viewing angles. On the basis of detailed photometric measurements the detection performance in a visual reaction task was measured in different viewing conditions. Viewing angle (0 degrees, frontal view; 30 degrees, off-axis; 50 degrees, off-axis) as well as ambient lighting (a dark or illuminated room) were varied. Reaction times and accuracy of detection performance were recorded. Results showed TFT's anisotropy to be a crucial factor deteriorating performance. With an increasing viewing angle performance decreased. It is concluded that TFT's anisotropy is a limiting factor for overall suitability and usefulness of this new display technology.

Social support may buffer the effect of intrafamilial stressors on preschool children's television viewing time in low-income families.

PubMed

Li, Kaigang; Jurkowski, Janine M; Davison, Kirsten K

2013-12-01

Excessive television (TV) viewing in preschool children has been linked to negative outcomes during childhood, including childhood obesity. In a sample of low-income families, this study examined associations between intrafamilial factors and preschool children's TV-viewing time and the moderating effect of social support from nonfamily members on this association. In 2010, 129 mothers/female guardians of 2- to 5-year-old children enrolled at five Head Start centers in Rensselaer County, New York, completed a self-report survey. The survey assessed child TV-viewing time (including TV, DVDs, and videos) and intrafamilial risk factors, including maternal perceived stress, depressive symptoms, TV viewing, leisure-time physical activity (inactivity), and family functioning. Social support from nonfamily members (nonfamily social support) was also measured and examined as an effect modifier. Children watched TV an average of 160 minutes per day. Moderate depressive symptoms (Personal Health Questionnaire depression scale scores ≥10), higher perceived stress, poorer family functioning, and higher maternal TV-viewing were significantly and independently associated with greater minutes of child TV viewing, controlling for covariates. In all instances, nonfamily social support moderated these associations, such that negative experiences within the family environment were linked with higher child TV-viewing time under conditions of low nonfamily social support, but not high nonfamily support. Social support from nonfamily members may buffer potentially negative effects of intrafamilial factors on preschool children's TV-viewing time.

Excessive TV viewing and cardiovascular disease risk factors in adolescents. The AVENA cross-sectional study

PubMed Central

2010-01-01

Background Excessive television (TV) viewing might play an important role in the development of cardiovascular disease (CVD). The aim of this study was to examine the independent associations between TV viewing and CVD risk factors in adolescents. Methods A sample of 425 adolescents, aged 13- to 18.5-year-old, was included in this study. Body mass index (BMI), waist circumference (WC), glucose, total cholesterol, triglycerides, HDL-cholesterol, LDL-cholesterol, apolipoprotein (apo) A-1, apo B-100, and lipoprotein(a) levels were determined. A composite CVD risk score was computed based on age-, sex-, sexual maturation- and race-standardized triglycerides, HDL-cholesterol, LDL-cholesterol and glucose. TV viewing was self-reported. Results Two hundred and twenty-five adolescents (53%) who spent >3 hrs/day watching TV were considered as the "high TV viewing" group. Ninety-nine adolescents (23%) from the total sample were classified as overweight according to International age- and sex-specific BMI values. The high TV viewing group had significantly less favorable values of HDL-cholesterol, glucose, apo A1 and CVD score, independent of age, sex, sexual maturation, race and weight status. There was a significant interaction effect of TV viewing × weight status (P = 0.002) on WC, and the negative influence of TV viewing on WC persisted in the overweight group (P = 0.031) but was attenuated in non-overweight adolescents (P > 0.05). Conclusion Excessive TV viewing seems to be related to an unfavorable CVD risk factors profile in adolescence. Reducing TV viewing in overweight adolescents might be beneficial to decrease abdominal body fat. PMID:20500845

Prolonged Screen Viewing Times and Sociodemographic Factors among Pregnant Women: A Cross-Sectional Survey in China

PubMed Central

Liu, Dengyuan; Rao, Yunshuang; Zeng, Huan; Zhang, Fan; Wang, Lu; Xie, Yaojie; Sharma, Manoj; Zhao, Yong

2018-01-01

Objectives: This study aimed to assess the prevalence of prolonged television, computer, and mobile phone viewing times and examined related sociodemographic factors among Chinese pregnant women. Methods: In this study, a cross-sectional survey was implemented among 2400 Chinese pregnant women in 16 hospitals of 5 provinces from June to August in 2015, and the response rate of 97.76%. We excluded women with serious complications and cognitive disorders. The women were asked about their television, computer, and mobile phone viewing during pregnancy. Prolonged television watching or computer viewing was defined as spending more than two hours on television or computer viewing per day. Prolonged mobile phone viewing was watching more than one hour on mobile phone per day. Results: Among 2345 pregnant women, about 25.1% reported prolonged television viewing, 20.6% reported prolonged computer viewing, and 62.6% reported prolonged mobile phone viewing. Pregnant women with long mobile phone viewing times were likely have long TV (Estimate = 0.080, Standard Error (SE) = 0.016, p < 0.001) and computer viewing times (Estimate = 0.053, SE = 0.022, p = 0.015). Pregnant women with long TV (Estimate = 0.134, SE = 0.027, p < 0.001) and long computer viewing times (Estimate = 0.049, SE = 0.020, p = 0.015) were likely have long mobile phone viewing times. Pregnant women with long TV viewing times were less likely to have long computer viewing times (Estimate = −0.032, SE = 0.015, p = 0.035), and pregnant women with long computer viewing times were less likely have long TV viewing times (Estimate = −0.059, SE = 0.028, p = 0.035). Pregnant women in their second pregnancy had lower prolonged computer viewing times than those in their first pregnancy (Odds Ratio (OR) 0.56, 95% Confidence Interval (CI) 0.42–0.74). Pregnant women in their second pregnancy were more likely have longer prolonged mobile phone viewing times than those in their first pregnancy (OR 1.25, 95% CI 1.01–1.55). Conclusions: The high prevalence rate of prolonged TV, computer, and mobile phone viewing times was common for pregnant women in their first and second pregnancy. This study preliminarily explored the relationship between sociodemographic factors and prolonged screen time to provide some indication for future interventions related to decreasing screen-viewing times during pregnancy in China. PMID:29495439

A comparison of emission calculations using different modeled indicators with 1-year online measurements.

PubMed

Lengers, Bernd; Schiefler, Inga; Büscher, Wolfgang

2013-12-01

The overall measurement of farm level greenhouse gas (GHG) emissions in dairy production is not feasible, from either an engineering or administrative point of view. Instead, computational model systems are used to generate emission inventories, demanding a validation by measurement data. This paper tests the GHG calculation of the dairy farm-level optimization model DAIRYDYN, including methane (CH₄) from enteric fermentation and managed manure. The model involves four emission calculation procedures (indicators), differing in the aggregation level of relevant input variables. The corresponding emission factors used by the indicators range from default per cow (activity level) emissions up to emission factors based on feed intake, manure amount, and milk production intensity. For validation of the CH₄ accounting of the model, 1-year CH₄ measurements of an experimental free-stall dairy farm in Germany are compared to model simulation results. An advantage of this interdisciplinary study is given by the correspondence of the model parameterization and simulation horizon with the experimental farm's characteristics and measurement period. The results clarify that modeled emission inventories (2,898, 4,637, 4,247, and 3,600 kg CO₂-eq. cow(-1) year(-1)) lead to more or less good approximations of online measurements (average 3,845 kg CO₂-eq. cow(-1) year(-1) (±275 owing to manure management)) depending on the indicator utilized. The more farm-specific characteristics are used by the GHG indicator; the lower is the bias of the modeled emissions. Results underline that an accurate emission calculation procedure should capture differences in energy intake, owing to milk production intensity as well as manure storage time. Despite the differences between indicator estimates, the deviation of modeled GHGs using detailed indicators in DAIRYDYN from on-farm measurements is relatively low (between -6.4% and 10.5%), compared with findings from the literature.

Glare effect for three types of street lamps based on White LEDs

NASA Astrophysics Data System (ADS)

Sun, Ching-Cherng; Jiang, Chong-Jhih; Chen, Yi-Chun; Yang, Tsung-Hsun

2014-05-01

This study is aimed to assess the glare effect from LED-based street lamps with three general optical designs, which are cluster LEDs with a single lens, a LED array accompany with a lens array, and a tilted LED array, respectively. Observation conditions were simulated based on various locations and viewing axes. Equivalent luminance calculations were used to reveal the glare levels of the three designs. The age effect for the calculated equivalent luminance was also examined for human eyes of people at the age of 40 or 60. The results demonstrate that among the three design types, a LED array accompany with a lens array causes relatively smaller glare for most viewing conditions.

A study of the vibrational energies of two coupled beams by finite element and green function (receptance) methods

NASA Astrophysics Data System (ADS)

Shankar, K.; Keane, A. J.

1995-04-01

The behaviour of two hinged-hinged beams, point coupled by springs (translational, rotary and a combination of both) with weak to strong coupling is studied from the point of view of vibrational energies, input power and power transferred through the coupling. Two configurations are studied: in the first case the beams are placed parallel to each other and only the transverse, Euler-Bernoulli modes are considered; the second configuration is more complicated with the beams placed perpendicular to each other, executing axial as well as transverse vibrations. These models are studied by using a finite element analysis (FEA) package and, alternatively, via the modally derived Green functions of the uncoupled subsystems. In both cases the beams are given proportional damping and one of the beams is driven by a point harmonic force. The effects of coupling stiffness and modal summation bandwidth are studied. It is shown that there is good agreement between the FEA and the Green function approach over a range of coupling strengths, but that at higher strengths the number of uncoupled modes used significantly affects the accuracy of the Green function method used here. The beams in the second configuration are then further studied from the point of view of SEA coupling loss factors. The frequency averaged coupling loss factors are calculated for weak and strong coupling, first by using a power injection method, where the power balance equations are formed on the assumption of only direct coupling loss factors. Then, the entire matrix of direct and indirect coupling loss factors is derived by using a deterministic modal approach. These are compared and the indirect coupling loss factors are found to be significant in magnitude in respect to the direct coupling loss factors. Several cases are studied in which the coupling powers and energy levels are predicted by using only the direct coupling loss factors and compared with the exact results obtained by using both direct and indirect factors. These agree only under certain conditions for weak coupling and show rather poorer agreement in the case of strong coupling. This behaviour demonstrates the importance of taking into account indirect coupling loss factors in SEA models having several subsystems.

Television viewing and snacking.

PubMed

Gore, Stacy A; Foster, Jill A; DiLillo, Vicki G; Kirk, Kathy; Smith West, Delia

2003-11-01

With the rise in obesity in America, the search for potential causes for this epidemic has begun to include a focus on environmental factors. Television (TV) viewing is one such factor, partially due to its potential as a stimulus for eating. The current study investigated the relationship between food intake and self-reported TV viewing in an effort to identify the impact of TV viewing on specific eating behaviors. Seventy-four overweight women seeking obesity treatment completed questionnaires assessing dietary habits and TV viewing behaviors. Results suggest that snacking, but not necessarily eating meals, while watching TV is associated with increased overall caloric intake and calories from fat. Therefore, interventions targeting stimulus control techniques to reduce snacking behavior may have an impact on overall caloric intake.

Beliefs About Child TV Viewing in Low-Income Mexican American Parents of Preschoolers: Development of the Beliefs About Child TV Viewing Scale (B-TV).

PubMed

Thompson, Darcy A; Johnson, Susan L; Schmiege, Sarah J; Vandewater, Elizabeth A; Boles, Richard E; Lev, Jerusha; Tschann, Jeanne M

2018-06-01

Objectives Parental beliefs about child television viewing may affect the way parents regulate child television viewing. Despite this, little research has focused on the development of measures of parental beliefs about child television viewing, particularly among ethnic minority parents and parents of young children. This study's objective was to develop and test a culturally-based measure of parental beliefs about television viewing in low-income Mexican American mothers of preschoolers. Methods Using a cross-sectional study design, 22 items reflecting parental beliefs about influences of TV on children were developed and assessed for psychometric properties in a sample of 312 low-income Mexican American mothers of preschoolers. Results Using exploratory factor analysis, we identified four factors reflecting four domains of parental beliefs: positive general beliefs, positive sleep-related beliefs, positive functional beliefs, and negative general beliefs. Internal reliabilities were acceptable (Cronbach's alpha = 0.70-0.89) for all factors except negative general beliefs (Cronbach's alpha = 0.61). Positive sleep-related beliefs and Positive Functional Beliefs were correlated with children's average daily hours of TV (r = 0.16, p < .01; r = 0.22, p < .001, respectively) and with mother's average daily hours of TV (r = 0.14, p < .05; r = 0.22, p < .001, respectively), providing initial support for construct validity. Conclusions for Practice The Beliefs about Child TV viewing scale measures four domains of parental beliefs regarding child TV viewing, and has good initial reliability and validity for three factors. Future use will allow investigators to conduct more in-depth evaluations on the influence of parental beliefs on the way parents shape their child's use of the TV.

Calculating Resonance Positions and Widths Using the Siegert Approximation Method

ERIC Educational Resources Information Center

Rapedius, Kevin

2011-01-01

Here, we present complex resonance states (or Siegert states) that describe the tunnelling decay of a trapped quantum particle from an intuitive point of view that naturally leads to the easily applicable Siegert approximation method. This can be used for analytical and numerical calculations of complex resonances of both the linear and nonlinear…

After Four Decades, Pioneer of Calculator Still Leads K-12 Field

ERIC Educational Resources Information Center

Trotter, Andrew

2007-01-01

Not all educators agree that the best ways to teach mathematics include giving students electronic calculators. But many do, and their view is reflected in the policies and practices of school districts, textbook publishers, testing companies, and state education agencies. That adds up to profits for Texas Instruments Inc., the Dallas-based…

Power flows and Mechanical Intensities in structural finite element analysis

NASA Technical Reports Server (NTRS)

Hambric, Stephen A.

1989-01-01

The identification of power flow paths in dynamically loaded structures is an important, but currently unavailable, capability for the finite element analyst. For this reason, methods for calculating power flows and mechanical intensities in finite element models are developed here. Formulations for calculating input and output powers, power flows, mechanical intensities, and power dissipations for beam, plate, and solid element types are derived. NASTRAN is used to calculate the required velocity, force, and stress results of an analysis, which a post-processor then uses to calculate power flow quantities. The SDRC I-deas Supertab module is used to view the final results. Test models include a simple truss and a beam-stiffened cantilever plate. Both test cases showed reasonable power flow fields over low to medium frequencies, with accurate power balances. Future work will include testing with more complex models, developing an interactive graphics program to view easily and efficiently the analysis results, applying shape optimization methods to the problem with power flow variables as design constraints, and adding the power flow capability to NASTRAN.

Function of minerals in the natural radioactivity level of Vaigai River sediments, Tamilnadu, India--spectroscopical approach.

PubMed

Ramasamy, V; Paramasivam, K; Suresh, G; Jose, M T

2014-01-03

Using Gamma ray and Fourier Transform Infrared (FTIR) spectroscopic techniques, level of natural radioactivity ((238)U, (232)Th and (40)K) and mineralogical characterization of Vaigai River sediments have been analyzed with the view of evaluating the radiation risk and its relation to available minerals. Different radiological parameters are calculated to know the entire radiological characterization. The average of activity concentrations and all radiological parameters are lower than the recommended safety limit. However, some sites are having higher radioactivity values than the safety limit. From the FTIR spectroscopic technique, the minerals such as quartz, microcline feldspar, orthoclase feldspar, kaolinite, gibbsite, calcite, montmorillonite and organic carbon are identified and they are characterized. The extinction co-efficient values are calculated to know the relative distribution of major minerals such as quartz, microcline feldspar, orthoclase feldspar and kaolinite. The calculated values indicate that the amount of quartz is higher than orthoclase feldspar, microcline feldspar and much higher than kaolinite. Crystallinity index is calculated to know the crystalline nature of quartz and the result indicates that the presence of ordered crystalline quartz in the present sediment. The role of minerals in the level of radioactivity is assessed by multivariate statistical analysis (Pearson's correlation and Cluster analysis). The statistical analysis confirms that the clay mineral kaolinite is the major factor than other major minerals to induce the important radioactivity variables such as absorbed dose rate and concentrations of (232)Th and (238)U. Copyright © 2013 Elsevier B.V. All rights reserved.

Assessment of radiant temperature in a closed incubator.

PubMed

Décima, Pauline; Stéphan-Blanchard, Erwan; Pelletier, Amandine; Ghyselen, Laurent; Delanaud, Stéphane; Dégrugilliers, Loïc; Telliez, Frédéric; Bach, Véronique; Libert, Jean-Pierre

2012-08-01

In closed incubators, radiative heat loss (R) which is assessed from the mean radiant temperature (Tr) accounts for 40-60% of the neonate's total heat loss. In the absence of a benchmark method to calculate Tr--often considered to be the same as the air incubator temperature-errors could have a considerable impact on the thermal management of neonates. We compared Tr using two conventional methods (measurement with a black-globe thermometer and a radiative "view factor" approach) and two methods based on nude thermal manikins (a simple, schematic design from Wheldon and a multisegment, anthropometric device developed in our laboratory). By taking the Tr estimations for each method, we calculated metabolic heat production values by partitional calorimetry and then compared them with the values calculated from V(O2) and V(CO2) measured in 13 preterm neonates. Comparisons between the calculated and measured metabolic heat production values showed that the two conventional methods and Wheldon's manikin underestimated R, whereas when using the anthropomorphic thermal manikin, the simulated versus clinical difference was not statistically significant. In conclusion, there is a need for a safety standard for measuring TR in a closed incubator. This standard should also make available estimating equations for all avenues of the neonate's heat exchange considering the metabolic heat production and the modifying influence of the thermal insulation provided by the diaper and by the mattress. Although thermal manikins appear to be particularly appropriate for measuring Tr, the current lack of standardized procedures limits their widespread use.

A generalized view of the correlation factor in solid-state diffusion

NASA Astrophysics Data System (ADS)

Akbar, Sheikh A.

1994-03-01

The correlation factor is commonly used to determine the mechanism of diffusion in solids. Although originally thought to be associated only with tracer diffusion, the concept of the correlation factor has broadened considerably over the last couple of decades. In light of these developments, it is important to generalize the concept. This article attempts to present a simple picture of an integrated view of the correlation factor in a way accessible to a wider audience. Some areas where the generalized correlation factor plays important roles are also highlighted.

Electron-positron interaction in jellium

NASA Astrophysics Data System (ADS)

Stachowiak, Henryk

1990-06-01

The problem of a positron in jellium is solved in an approach involving self-consistent perturbation of a Jastrow-type state. The merits of this approach are the following: (1) The one-electron wave functions are allowed to be nonorthogonal, (2) the formalism is indifferent with regard to uti- lizing the Pauli exclusion principle, and (3) numerical calculations are shorter by a factor of the order of 100 in comparison with other theories. The first two points are of special importance in view of the difficulties encountered both by the Kahana formalism and the approach of Lowy and Jackson. The screening cloud obtained in this work reproduces quite well the recent results of Rubaszek and Stachowiak, as do the partial annihilation rates. A comparison with the results of other theories and with experiment is also made.

What are some of the cognitive, psychological, and social factors that facilitate or hinder licensed vocational nursing students' acquisition of problem-solving skills involved with medication-dosage calculations?

NASA Astrophysics Data System (ADS)

Allen, Arthur William

The purpose of this study was to examine the cognitive and psychological factors that either enhanced or inhibited Licensed Vocational Nurse (LVN) students' abilities to solve medication-dosage calculation problems. A causal-comparative approach was adopted for use in this study which encompassed aspects of both qualitative and quantitative data collection. A purposive, maximum-variation sample of 20 LVN students was chosen from among a self-selected population of junior college LVN students. The participants' views and feelings concerning their training and clinical experiences in medication administration was explored using a semi-structured interview. In addition, data revealing the students' actual competence at solving sample medication-dosage calculation problems was gathered using a talk-aloud protocol. Results indicated that few participants anticipated difficulty with medication-dosage calculations, yet many participants reported being lost during much of the medication-dosage problem solving instruction in class. While many participants (65%) were able to solve the medication-dosage problems, some (35%) of the participants were unable to correctly solve the problems. Successful students usually spent time analyzing the problem and planning a solution path, and they tended to solve the problem faster than did unsuccessful participants. Successful participants relied on a formula or a proportional statement to solve the problem. They recognized conversion problems as a two-step process and solved the problems in that fashion. Unsuccessful participants often went directly from reading the problem statement to attempts at implementing vague plans. Some unsuccessful participants finished quickly because they just gave up. Others spent considerable time backtracking by rereading the problem and participating in aimless exploration of the problem space. When unsuccessful participants tried to use a formula or a proportion, they were unsure of the formula's or the proportion's format. A few unsuccessful participants lacked an understanding of basic algebraic procedures and of metric measurements. Even participants who had great difficulty solving medication-dosage calculation problems could expeditiously solve more complex problems if the medication used in the problem was well known to them.

Views of the Israeli public on expanding the authority of nurses.

PubMed

Ben Natan, Merav; Dmitriev, Yulia; Shubovich, Olga; Sharon, Ira

2013-03-01

To explore the views of the Israeli public on expanding the authority of nurses and identify factors affecting these views. New advanced nursing roles are currently being introduced and nursing is undergoing dynamic change. Public views on expanding the authority of nurses and factors affecting public views await investigation. In a correlational study, a questionnaire was administered to 200 male and female Israelis aged 18 and older treated at a hospital or healthcare clinic at least once over the past year. Most respondents are in favour of expanding the authority of nurses, considered vital for patients. In addition, the public is in favour of certifying clinical nursing specialists in all fields. Influential factors were ethnicity, personal acquaintance with nurses, income and religiosity. The public has a positive perception of expanding the authority of nurses, and major determinants are familiarity with nursing, ethnicity, income and religiosity. Understanding public views on expanding the authority of nurses in Israel will help policymakers adjust their actions according to social perceptions and needs. This will help nursing managers further the process of expanding nurse authority, to the satisfaction of both nurses and the public they serve. © 2012 Blackwell Publishing Ltd.

Brain stem/brain stem occipital bone ratio and the four-line view in nuchal translucency images of fetuses with open spina bifida.

PubMed

Iuculano, Ambra; Zoppi, Maria Angelica; Piras, Alessandra; Arras, Maurizio; Monni, Giovanni

2014-09-10

Abstract Objective: Brain stem depth/brain stem occipital bone distance (BS/BSOB ratio) and the four-line view, in images obtained for nuchal translucency (NT) screening in fetuses with open spina bifida (OSB). Methods: Single center, retrospective study based on the assessment of NT screening images of fetuses with OSB. A ratio between the BS depth and the BSOB distance was calculated (BS/BSOB ratio) and the four-line view observed, and the sensitivity for a BS/BSOB ratio superior/equal to 1, and for the lack of detection of the four-line view were calculated. Results: There were 17 cases of prenatal diagnosis OSB. In six cases, the suspicion on OSB was raised during NT screening, in six cases, the diagnosis was made before 20 weeks and in five cases during anomaly scan. The BS/BSOB ratio was superior/equal to 1 in all 17 cases, and three lines, were visualized in 15/17 images of the OSB cases, being the sensitivity 100% (95% CI, 81 to 100%) and 88% (95% CI, 65 to 96%). Conclusion: Assessment of BS/BSOB ratio and four-line view in NT images is feasible detecting affected by OSB with high sensitivity. The presence of associated anomalies or of an enlarged NT enhances the early detection.

Reference Values for Human Posture Measurements Based on Computerized Photogrammetry: A Systematic Review.

PubMed

Macedo Ribeiro, Ana Freire; Bergmann, Anke; Lemos, Thiago; Pacheco, Antônio Guilherme; Mello Russo, Maitê; Santos de Oliveira, Laura Alice; de Carvalho Rodrigues, Erika

The main objective of this study was to review the literature to identify reference values for angles and distances of body segments related to upright posture in healthy adult women with the Postural Assessment Software (PAS/SAPO). Electronic databases (BVS, PubMed, SciELO and Scopus) were assessed using the following descriptors: evaluation, posture, photogrammetry, physical therapy, postural alignment, postural assessment, and physiotherapy. Studies that performed postural evaluation in healthy adult women with PAS/SAPO and were published in English, Portuguese and Spanish, between the years 2005 and 2014 were included. Four studies met the inclusion criteria. Data from the included studies were grouped to establish the statistical descriptors (mean, variance, and standard deviation) of the body angles and distances. A total of 29 variables were assessed (10 in the anterior views, 16 in the lateral right and left views, and 3 in the posterior views), and its respective mean and standard deviation were calculated. Reference values for the anterior and posterior views showed no symmetry between the right and left sides of the body in the frontal plane. There were also small differences in the calculated reference values for the lateral view. The proposed reference values for quantitative evaluation of the upright posture in healthy adult women estimated in the present study using PAS/SAPO could guide future studies and help clinical practice. Copyright © 2017. Published by Elsevier Inc.

Time trends of physical activity and television viewing time in Brazil: 2006-2012.

PubMed

Mielke, Grégore I; Hallal, Pedro C; Malta, Deborah C; Lee, I-Min

2014-08-15

Despite recent advances in surveillance of physical activity, data on time trends of physical activity in low and middle-income countries are lacking. This study describes time trends in physical activity and television viewing between 2006 and 2012 among Brazilian adults. Data from 371,271 adult participants (18 + years) in the Surveillance System for Risk and Protective Factors for Chronic Illnesses using Telephone Survey (VIGITEL) were analysed. Time trends in leisure-time physical activity (≥ 5 days/wk; ≥ 30 min/day), transportation physical activity (using bicycle or walking for ≥ 30 minutes per day as a means of transportation to/from work) and proportion of participants spending more than three hours per day watching television were analysed. Annual changes according to sex, age and years of schooling were calculated. There was an increase in leisure-time physical activity from 12.8% in 2006 to 14.9% in 2012 (annual increase of 1.9%; p < 0.001). This increase was more marked in younger participants and those with high-school education. Transportation physical activity decreased 12.9% per year (p < 0.001) from 2006 to 2008 and 5.8% per year from 2009 to 2012 (p < 0.001). The annual decline in television viewing time was 5% (p < 0.001) between 2006 and 2009 and 2% (p = 0.16) between 2010 and 2012. National survey data from Brazil indicate that leisure-time physical activity appears to be increasing, while television viewing time appears to be decreasing in recent years. However, transportation physical activity has been declining. These data are important for informing national public health policies.

We Need Compassion More than Standards

ERIC Educational Resources Information Center

Alexander, James

2014-01-01

There are two causes that have been suggested as the major contributors to poor student achievement. One view attributes student underachievement to educational factors such as inadequate standards and poor teachers. The other view sees societal factors as the main contributor to low student achievement. This commentary looks at one societal…

Predicting US Infants' and Toddlers' TV/Video Viewing Rates: Mothers' Cognitions and Structural Life Circumstances

PubMed Central

Vaala, Sarah E.; Hornik, Robert C.

2014-01-01

There has been rising international concern over media use with children under two. As little is known about the factors associated with more or less viewing among very young children, this study examines maternal factors predictive of TV/video viewing rates among American infants and toddlers. Guided by the Integrative Model of Behavioral Prediction, this survey study examines relationships between children's rates of TV/video viewing and their mothers' structural life circumstances (e.g., number of children in the home; mother's screen use), and cognitions (e.g., attitudes; norms). Results suggest that mothers' structural circumstances and cognitions respectively contribute independent explanatory power to the prediction of children's TV/video viewing. Influence of structural circumstances is partially mediated through cognitions. Mothers' attitudes as well as their own TV/video viewing behavior were particularly predictive of children's viewing. Implications of these findings for international efforts to understand and reduce infant/toddler TV/video exposure are discussed. PMID:25489335

Are Patient Views about Antibiotics Related to Clinician Perceptions, Management and Outcome? A Multi-Country Study in Outpatients with Acute Cough

PubMed Central

Coenen, Samuel; Francis, Nick; Kelly, Mark; Hood, Kerenza; Nuttall, Jacqui; Little, Paul; Verheij, Theo J. M.; Melbye, Hasse; Goossens, Herman; Butler, Christopher C.

2013-01-01

Background Outpatients with acute cough who expect, hope for or ask for antibiotics may be more unwell, benefit more from antibiotic treatment, and be more satisfied with care when they are prescribed antibiotics. Clinicians may not accurately identify those patients. Objective To explore whether patient views (expecting, hoping for or asking for antibiotics) are associated with illness presentation and resolution, whether patient views are accurately perceived by clinicians, and the association of all these factors with antibiotic prescribing and patient satisfaction with care. Methods Prospective observational study of 3402 adult patients with acute cough presenting in 14 primary care networks. Correlations and associations tested with multilevel logistic regression and McNemar ‘s tests, and Cohen’s Kappa, positive agreement (PA) and negative agreement (NA) calculated as appropriate. Results 1,213 (45.1%) patients expected, 1,093 (40.6%) hoped for, and 275 (10.2%) asked for antibiotics. Clinicians perceived 840 (31.3%) as wanting to be prescribed antibiotics (McNemar’s test, p<0.05). Their perception agreed modestly with the three patient views (Kappa’s = 0.29, 0.32 and 0.21, PA’s = 0.56, 0.56 and 0.33, NA’s = 0.72, 0.75 and 0.82, respectively). 1,464 (54.4%) patients were prescribed antibiotics. Illness presentation and resolution were similar for patients regardless their views. These associations were not modified by antibiotic treatment. Patient expectation and hope (OR:2.08, 95% CI:[1.48,2.93] and 2.48 [1.73,3.55], respectively), and clinician perception (12.18 [8.31,17.84]) were associated with antibiotic prescribing. 2,354 (92.6%) patients were satisfied. Only those hoping for antibiotics were less satisfied when antibiotics were not prescribed (0.39 [0.17,0.90]). Conclusion Patient views about antibiotic treatment were not useful for identifying those who will benefit from antibiotics. Clinician perceptions did not match with patient views, but particularly influenced antibiotic prescribing. Patients were generally satisfied with care, but those hoping for but not prescribed antibiotics were less satisfied. Clinicians need to more effectively elicit and address patient views about antibiotics. PMID:24194845

[Type 2 diabetes mellitus and cardiovascular risk factors: is comprehensive treatment required?].

PubMed

Nadal, Josep Franch; Gutiérrez, Pedro Conthe

2013-09-01

Diabetes mellitus, especially type 2, is a metabolic disease involving the coexistence of several cardiovascular risk factors. Affected patients are therefore at high cardiovascular risk (2-3 times higher than that of men in the general population and 2-6 times higher than that of women). Cardiovascular disease is the main cause of death in the diabetic population, followed by cancer. Cardiovascular risk cannot be compared between diabetic patients and persons who have already shown one or more manifestations of cardiovascular disease (such as myocardial infarction). Single risk factors should be evaluated in combination with other risk factors and a person's cardiovascular risk should be individually assessed. Cardiovascular risk assessment in patients with diabetes through current calculations methods is complex because their ability to predict risk in individuals is very low. Studies such as that by Steno have demonstrated the validity of a comprehensive strategy to control all the risk factors present in persons with type 2 diabetes mellitus, which can reduce the development of micro- and macrovascular complications and mortality by almost 50%. The present article reviews each of the classical cardiovascular risk factors (hypertension, dyslipidemia, smoking, obesity, sedentariness) in relation to diabetes, as well as their recommended targets and the benefits of their control. In view of the above, a comprehensive approach is recommended to control the multiple risk factors that can coexist in persons with type 2 diabetes mellitus. Copyright © 2013 Elsevier España, S.L. All rights reserved.

Analysis of polarization characteristics of plant canopies using land-based remote sensing measurements for development of ground truth methods

NASA Astrophysics Data System (ADS)

Sidko, Aleksandr; Pisman, Tamara; Botvich, Irina; Shevyrnogov, Anatoly

In order to develop satellite technology for monitoring of terrestrial plant canopies and land-based optical remote sensing techniques, one should employ new approaches to identifying farmlands and determining the plant species composition. The results present a study on polarized characteristics of spectral reflection factor of plant canopies (forests and farm crop canopies) under field conditions, using optical remote sensing techniques. The polarized components of the reflectance factor and the degree of polarization were calculated. Measurements were performed using a spectrophotometer with a polarized light filter attachment. Measurements were done within the spectral range from 400 to 840 nm. The viewing angle was no greater than 200 with respect to the nadir. Measurements of the polarization characteristics of the vegetation on the test ranges were conducted during June-July month when the height of the sun was at its zenith. Different wavelength dependences of the spectral reflection factor polarized component (Rq) and degree of polarization (P) were found both for the coniferous and broadleaf forests (pine and birch) and for farm crops (wheat and corn) and grass canopies. These differences can be used to determine species composition of plant canopies.

Resonant Inverse Compton Scattering Spectra from Highly Magnetized Neutron Stars

NASA Astrophysics Data System (ADS)

Wadiasingh, Zorawar; Baring, Matthew G.; Gonthier, Peter L.; Harding, Alice K.

2018-02-01

Hard, nonthermal, persistent pulsed X-ray emission extending between 10 and ∼150 keV has been observed in nearly 10 magnetars. For inner-magnetospheric models of such emission, resonant inverse Compton scattering of soft thermal photons by ultrarelativistic charges is the most efficient production mechanism. We present angle-dependent upscattering spectra and pulsed intensity maps for uncooled, relativistic electrons injected in inner regions of magnetar magnetospheres, calculated using collisional integrals over field loops. Our computations employ a new formulation of the QED Compton scattering cross section in strong magnetic fields that is physically correct for treating important spin-dependent effects in the cyclotron resonance, thereby producing correct photon spectra. The spectral cutoff energies are sensitive to the choices of observer viewing geometry, electron Lorentz factor, and scattering kinematics. We find that electrons with energies ≲15 MeV will emit most of their radiation below 250 keV, consistent with inferred turnovers for magnetar hard X-ray tails. More energetic electrons still emit mostly below 1 MeV, except for viewing perspectives sampling field-line tangents. Pulse profiles may be singly or doubly peaked dependent on viewing geometry, emission locale, and observed energy band. Magnetic pair production and photon splitting will attenuate spectra to hard X-ray energies, suppressing signals in the Fermi-LAT band. The resonant Compton spectra are strongly polarized, suggesting that hard X-ray polarimetry instruments such as X-Calibur, or a future Compton telescope, can prove central to constraining model geometry and physics.

An Online Documentary Film to Motivate Quit Attempts Among Smokers in the General Population (4Weeks2Freedom): A Randomized Controlled Trial.

PubMed

Brown, Jamie; Michie, Susan; Walmsley, Matthew; West, Robert

2016-05-01

Online motivational films to promote quit attempts could encourage large numbers of smokers to stop at low unit cost. We evaluated an online film documenting the experiences of smokers who recorded the first month of their successful attempts to quit (4Weeks2Freedom). The film was designed to boost motivation and self-efficacy and provide role-models to promote ex-smoker identities. This was a randomized trial with individual assignment to a no-intervention control (n = 1016), an informational film (n = 1004), or 4Weeks2Freedom (n = 999). The development of 4Weeks2Freedom was informed by PRIME theory and focus-group testing with smokers. The 90-minute film was available online to view in one sitting or as chapters over 4 weeks to coincide with the progress of an attempt. The primary outcome was a quit attempt in the 4 weeks between assignment and study endpoint by intent-to-treat. Participants smoked a mean of 13 cigarettes per day and 31% reported not wanting to stop. At follow-up, 55% reported viewing the informational control film and 56% viewing 4Weeks2Freedom. There was no detectable effect compared with the no-intervention control (OR = 0.99, 95% CI = 0.81 to 1.21, 24.3% vs. 24.5%) or informational control film (OR = 0.99, 95% CI = 0.80 to 1.21, 24.3% vs. 24.6%). Calculation of Bayes factors ruled out insensitive data and indicated the intervention was no more effective than either the no-intervention control (Bayes factor = 0.20) or informational control film (Bayes factor = 0.27). The pattern of results was unchanged in sensitivity analyses that examined the effect among only those who viewed the films. The online documentary film (4Weeks2Freedom) designed to boost motivation and self-efficacy and to promote ex-smoker identity does not appear to prompt quit attempts among smokers. This trial found that an online documentary film (4Weeks2Freedom) designed to boost motivation and self-efficacy and to promote ex-smoker identity was ineffective in prompting quit attempts among an unselected panel of smokers from the UK. This approach appears unpromising as a means of raising the rate at which smokers attempt to quit and is a low priority for future research. © The Author 2015. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco.

An Online Documentary Film to Motivate Quit Attempts Among Smokers in the General Population (4Weeks2Freedom): A Randomized Controlled Trial

PubMed Central

Michie, Susan; Walmsley, Matthew; West, Robert

2016-01-01

Introduction: Online motivational films to promote quit attempts could encourage large numbers of smokers to stop at low unit cost. We evaluated an online film documenting the experiences of smokers who recorded the first month of their successful attempts to quit (4Weeks2Freedom). The film was designed to boost motivation and self-efficacy and provide role-models to promote ex-smoker identities. Methods: This was a randomized trial with individual assignment to a no-intervention control (n = 1016), an informational film (n = 1004), or 4Weeks2Freedom (n = 999). The development of 4Weeks2Freedom was informed by PRIME theory and focus-group testing with smokers. The 90-minute film was available online to view in one sitting or as chapters over 4 weeks to coincide with the progress of an attempt. The primary outcome was a quit attempt in the 4 weeks between assignment and study endpoint by intent-to-treat. Results: Participants smoked a mean of 13 cigarettes per day and 31% reported not wanting to stop. At follow-up, 55% reported viewing the informational control film and 56% viewing 4Weeks2Freedom. There was no detectable effect compared with the no-intervention control (OR = 0.99, 95% CI = 0.81 to 1.21, 24.3% vs. 24.5%) or informational control film (OR = 0.99, 95% CI = 0.80 to 1.21, 24.3% vs. 24.6%). Calculation of Bayes factors ruled out insensitive data and indicated the intervention was no more effective than either the no-intervention control (Bayes factor = 0.20) or informational control film (Bayes factor = 0.27). The pattern of results was unchanged in sensitivity analyses that examined the effect among only those who viewed the films. Conclusion: The online documentary film (4Weeks2Freedom) designed to boost motivation and self-efficacy and to promote ex-smoker identity does not appear to prompt quit attempts among smokers. Implications: This trial found that an online documentary film (4Weeks2Freedom) designed to boost motivation and self-efficacy and to promote ex-smoker identity was ineffective in prompting quit attempts among an unselected panel of smokers from the UK. This approach appears unpromising as a means of raising the rate at which smokers attempt to quit and is a low priority for future research. PMID:26220547

A Meta-Analysis of Gender Differences in Terms of Teacher Views on the Instructional Leadership Behavior of Principals

ERIC Educational Resources Information Center

Kis, Ali; Konan, Necdet

2014-01-01

The main aim of this study was to gather teachers' views to determine the effect size of gender differences on the instructional leadership behavior of school principals. The standardized mean difference (SMD) was calculated to measure the effect size in this study. An initial search yielded 126 studies on the research topic, which consists…

SU-F-T-67: Correction Factors for Monitor Unit Verification of Clinical Electron Beams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haywood, J

Purpose: Monitor units calculated by electron Monte Carlo treatment planning systems are often higher than TG-71 hand calculations for a majority of patients. Here I’ve calculated tables of geometry and heterogeneity correction factors for correcting electron hand calculations. Method: A flat water phantom with spherical volumes having radii ranging from 3 to 15 cm was created. The spheres were centered with respect to the flat water phantom, and all shapes shared a surface at 100 cm SSD. D{sub max} dose at 100 cm SSD was calculated for each cone and energy on the flat phantom and for the spherical volumesmore » in the absence of the flat phantom. The ratio of dose in the sphere to dose in the flat phantom defined the geometrical correction factor. The heterogeneity factors were then calculated from the unrestricted collisional stopping power for tissues encountered in electron beam treatments. These factors were then used in patient second check calculations. Patient curvature was estimated by the largest sphere that aligns to the patient contour, and appropriate tissue density was read from the physical properties provided by the CT. The resulting MU were compared to those calculated by the treatment planning system and TG-71 hand calculations. Results: The geometry and heterogeneity correction factors range from ∼(0.8–1.0) and ∼(0.9–1.01) respectively for the energies and cones presented. Percent differences for TG-71 hand calculations drop from ∼(3–14)% to ∼(0–2)%. Conclusion: Monitor units calculated with the correction factors typically decrease the percent difference to under actionable levels, < 5%. While these correction factors work for a majority of patients, there are some patient anatomies that do not fit the assumptions made. Using these factors in hand calculations is a first step in bringing the verification monitor units into agreement with the treatment planning system MU.« less

Hospital financing: calculating inpatient capital costs in Germany with a comparative view on operating costs and the English costing scheme.

PubMed

Vogl, Matthias

2014-04-01

The paper analyzes the German inpatient capital costing scheme by assessing its cost module calculation. The costing scheme represents the first separated national calculation of performance-oriented capital cost lump sums per DRG. The three steps in the costing scheme are reviewed and assessed: (1) accrual of capital costs; (2) cost-center and cost category accounting; (3) data processing for capital cost modules. The assessment of each step is based on its level of transparency and efficiency. A comparative view on operating costing and the English costing scheme is given. Advantages of the scheme are low participation hurdles, low calculation effort for G-DRG calculation participants, highly differentiated cost-center/cost category separation, and advanced patient-based resource allocation. The exclusion of relevant capital costs, nontransparent resource allocation, and unclear capital cost modules, limit the managerial relevance and transparency of the capital costing scheme. The scheme generates the technical premises for a change from dual financing by insurances (operating costs) and state (capital costs) to a single financing source. The new capital costing scheme will intensify the discussion on how to solve the current investment backlog in Germany and can assist regulators in other countries with the introduction of accurate capital costing. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Numerical Calculation of Non-uniform Magnetization Using Experimental Magnetic Field Data

NASA Astrophysics Data System (ADS)

Jhun, Bukyoung; Jhun, Youngseok; Kim, Seung-wook; Han, JungHyun

2018-05-01

A relation between the distance from the surface of a magnet and the number of cells required for a numerical calculation in order to secure the error below a certain threshold is derived. We also developed a method to obtain the magnetization at each part of the magnet from the experimentally measured magnetic field. This method is applied to three magnets with distinct patterns on magnetic-field-viewing film. Each magnet showed a unique pattern of magnetization. We found that the magnet that shows symmetric magnetization on the magnetic-field-viewing film is not uniformly magnetized. This method can be useful comparing the magnetization between magnets that yield typical magnetic field and those that yield atypical magnetic field.

Disk hologram made from a computer-generated hologram.

PubMed

Yamaguchi, Takeshi; Fujii, Tomohiko; Yoshikawa, Hiroshi

2009-12-01

We have been investigating disk holograms made from a computer-generated hologram (CGH). Since a general flat format hologram has a limited viewable area, we usually cannot see the other side of the reconstructed object. Therefore, we propose a computer-generated cylindrical hologram (CGCH) to obtain a hologram with a 360 deg viewable area. The CGCH has a special shape that is difficult to construct and calculation of such a hologram takes too much time. In contrast, a disk-type hologram is well known as a 360 deg viewable hologram. Since a regular disk hologram is a flat reflective type, the reconstruction setup is easy. However, there are just a few reports about creating a disk hologram by use of a CGH. Because the output device lacks spatial resolution, the hologram cannot provide a large diffraction angle. In addition, the viewing zone depends on the hologram size; the maximum size of the fringe pattern is decided on the basis of the special frequency of the output device. The calculation amount of the proposed hologram is approximately a quarter of that of a CGCH. In a previous study, a disk hologram made from a CGH was achieved. However, since the relation between the vertical viewing zone and reconstructed image size is a trade-off, the size of the reconstructed image and view zone is not enough for practical use. To improve both parameters, we modified a fringe printer to issue a high-resolution fringe pattern for a disk hologram. In addition, we propose a new calculation method for fast calculation.

What the Common Economic Arguments against Comparable Worth Are Worth.

ERIC Educational Resources Information Center

Bergmann, Barbara R.

1989-01-01

Reviews economists' views about how the economy works, from which conclusions opposing comparable worth are drawn. Discusses factors that have been omitted from economists' views--social and psychological factors that affect behavior in the workplace, permit and encourage discrimination, and have an effect on the distribution of jobs and wages.…

Learning as Conceptual Change: Factors Mediating the Development of Preservice Elementary Teachers' Views of Nature of Science

ERIC Educational Resources Information Center

Abd-El-Khalick, Fouad; Akerson, Valarie L.

2004-01-01

This study assessed, and identified factors in participants' learning ecologies that mediated, the effectiveness of an explicit reflective instructional approach that satisfied conditions for learning as conceptual change on preservice elementary teachers' views of nature of science (NOS). Participants were 28 undergraduate students enrolled in an…

TU-D-209-01: Dosimetry of Diagnostic Work Up Mammography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jallow, N; Sechopoulos, I

2016-06-15

Purpose: To investigate patient average glandular dose (AGD) characteristics of diagnostic mammography. Methods: The techniques used to image 14420 patients who received diagnostic work up mammography from October 2008 to December 2014 at one academic hospital were retrospectively collected. The most common diagnostic views and the techniques used for each according to compressed breast thickness were determined. For all techniques, 1st half value layer and air kerma output per tube current-exposure time product were measured; then the incident air kerma for each acquisition was calculated. The values for normalized glandular dose (DgN) were obtained with a validated Monte Carlo simulationmore » of mammographic acquisition. The mono-energetic DgN results were combined according to relative fluence using the TASMICS model to obtain DgN coefficients for each spectrum. The spectral DgN and calculated incident air kerma were used to estimate AGD of patients with breast thickness ranging from 2 to 8 cm. Results: The most common views utilized during diagnostic mammography were magnification craniocaudal (24%), magnification mediolateral (19%), spot craniocaudal (28%), and spot mediolateral oblique (24%). The AGD increased with increasing breast thickness for both the magnification and spot views. The AGD for a 5.5 cm thick breast was approximately 6.8 mGy and 2.2 mGy for the magnification and spot views, respectively. The AGD ranged from 3.6 mGy to 6.8 mGy for the magnification views and from 1.0 mGy to 3.1 mGy for spot views. The difference in AGD between the two magnification views or the two spot views was not significant. Conclusion: These results provide information on breast dose to which screening recalled women are exposed to. In addition to understanding the dose used for common clinical imaging tests, this data could be used when comparing use of mammography for diagnostic workup to other potential modalities, such as breast tomosynthesis and breast CT.« less

Metadyn View: Fast web-based viewer of free energy surfaces calculated by metadynamics

NASA Astrophysics Data System (ADS)

Hošek, Petr; Spiwok, Vojtěch

2016-01-01

Metadynamics is a highly successful enhanced sampling technique for simulation of molecular processes and prediction of their free energy surfaces. An in-depth analysis of data obtained by this method is as important as the simulation itself. Although there are several tools to compute free energy surfaces from metadynamics data, they usually lack user friendliness and a build-in visualization part. Here we introduce Metadyn View as a fast and user friendly viewer of bias potential/free energy surfaces calculated by metadynamics in Plumed package. It is based on modern web technologies including HTML5, JavaScript and Cascade Style Sheets (CSS). It can be used by visiting the web site and uploading a HILLS file. It calculates the bias potential/free energy surface on the client-side, so it can run online or offline without necessity to install additional web engines. Moreover, it includes tools for measurement of free energies and free energy differences and data/image export.

The influence of polarization on box air mass factors for UV/vis nadir satellite observations

NASA Astrophysics Data System (ADS)

Hilboll, Andreas; Richter, Andreas; Rozanov, Vladimir V.; Burrows, John P.

2015-04-01

Tropospheric abundances of pollutant trace gases like, e.g., NO2, are often derived by applying the differential optical absorption spectroscopy (DOAS) method to space-borne measurements of back-scattered and reflected solar radiation. The resulting quantity, the slant column density (SCD), subsequently has to be converted to more easily interpretable vertical column densities by means of the so-called box air mass factor (BAMF). The BAMF describes the ratio of SCD and VCD within one atmospheric layer and is calculated by a radiative transfer model. Current operational and scientific data products of satellite-derived trace gas VCDs do not include the effect of polarization in their radiative transfer models. However, the various scattering processes in the atmosphere do lead to a distinctive polarization pattern of the observed Earthshine spectra. This study investigates the influence of these polarization patterns on box air mass factors for satellite nadir DOAS measurements of NO2 in the UV/vis wavelength region. NO2 BAMFs have been simulated for a multitude of viewing geometries, surface albedos, and surface altitudes, using the radiative transfer model SCIATRAN. The results show a potentially large influence of polarization on the BAMF, which can reach 10% and more close to the surface. A simple correction for this effect seems not to be feasible, as it strongly depends on the specific measurement scenario and can lead to both high and low biases of the resulting NO2 VCD. We therefore conclude that all data products of NO2 VCDs derived from space-borne DOAS measurements should include polarization effects in their radiative transfer model calculations, or at least include the errors introduced by using linear models in their uncertainty estimates.

The Temporal Dynamics of Terrestrial Organic Matter Transfer to the Oceans: Initial Assessment and Application

DTIC Science & Technology

2007-06-01

2.2.4 A QUALITATIVE VIEW OF OC CYCLING 44 2.2.5 COUPLED ISOTOPE MASS BALANCE CALCULATIONS 47 2.3 CONCLUSIONS 56 ACKNOWLEDGEMENTS 57 REFERENCES 58...METHODS 71 3.2 RESULTS & DISCUSSION 73 3.2.1 CHRONOLOGY DEVELOPMENT 73 3.2.2 ELEMENTAL AND ISOTOPIC PROFILES 77 3.2.3 MASS BALANCE CALCULATIONS 80 3.3...2005). Within this framework, isotopic mass balance calculations used to assess the fractional abundance of modem and ancient OC (Blair et al., 2003

Computational fluid dynamics: An engineering tool?

NASA Astrophysics Data System (ADS)

Anderson, J. D., Jr.

1982-06-01

Computational fluid dynamics in general, and time dependent finite difference techniques in particular, are examined from the point of view of direct engineering applications. Examples are given of the supersonic blunt body problem and gasdynamic laser calculations, where such techniques are clearly engineering tools. In addition, Navier-Stokes calculations of chemical laser flows are discussed as an example of a near engineering tool. Finally, calculations of the flowfield in a reciprocating internal combustion engine are offered as a promising future engineering application of computational fluid dynamics.

RENEW v3.2 user's manual, maintenance estimation simulation for Space Station Freedom Program

NASA Technical Reports Server (NTRS)

Bream, Bruce L.

1993-01-01

RENEW is a maintenance event estimation simulation program developed in support of the Space Station Freedom Program (SSFP). This simulation uses reliability and maintainability (R&M) and logistics data to estimate both average and time dependent maintenance demands. The simulation uses Monte Carlo techniques to generate failure and repair times as a function of the R&M and logistics parameters. The estimates are generated for a single type of orbital replacement unit (ORU). The simulation has been in use by the SSFP Work Package 4 prime contractor, Rocketdyne, since January 1991. The RENEW simulation gives closer estimates of performance since it uses a time dependent approach and depicts more factors affecting ORU failure and repair than steady state average calculations. RENEW gives both average and time dependent demand values. Graphs of failures over the mission period and yearly failure occurrences are generated. The averages demand rate for the ORU over the mission period is also calculated. While RENEW displays the results in graphs, the results are also available in a data file for further use by spreadsheets or other programs. The process of using RENEW starts with keyboard entry of the R&M and operational data. Once entered, the data may be saved in a data file for later retrieval. The parameters may be viewed and changed after entry using RENEW. The simulation program runs the number of Monte Carlo simulations requested by the operator. Plots and tables of the results can be viewed on the screen or sent to a printer. The results of the simulation are saved along with the input data. Help screens are provided with each menu and data entry screen.

High temperature spectral emissivity measurement using integral blackbody method

NASA Astrophysics Data System (ADS)

Pan, Yijie; Dong, Wei; Lin, Hong; Yuan, Zundong; Bloembergen, Pieter

2016-10-01

Spectral emissivity is a critical material's thermos-physical property for heat design and radiation thermometry. A prototype instrument based upon an integral blackbody method was developed to measure material's spectral emissivity above 1000 °. The system was implemented with an optimized commercial variable-high-temperature blackbody, a high speed linear actuator, a linear pyrometer, and an in-house designed synchronization circuit. A sample was placed in a crucible at the bottom of the blackbody furnace, by which the sample and the tube formed a simulated blackbody which had an effective total emissivity greater than 0.985. During the measurement, the sample was pushed to the end opening of the tube by a graphite rod which was actuated through a pneumatic cylinder. A linear pyrometer was used to monitor the brightness temperature of the sample surface through the measurement. The corresponding opto-converted voltage signal was fed and recorded by a digital multi-meter. A physical model was proposed to numerically evaluate the temperature drop along the process. Tube was discretized as several isothermal cylindrical rings, and the temperature profile of the tube was measurement. View factors between sample and rings were calculated and updated along the whole pushing process. The actual surface temperature of the sample at the end opening was obtained. Taking advantages of the above measured voltage profile and the calculated true temperature, spectral emissivity under this temperature point was calculated.

Soybean canopy reflectance as a function of view and illumination geometry

NASA Technical Reports Server (NTRS)

Ranson, K. J.; Vanderbilt, V. C.; Biehl, L. L.; Robinson, B. F.; Bauer, M. E.

1981-01-01

Reflectances were calculated from measurements at four wavelength bands through eight view azimuth and seven view zenith directions, for various solar zenith and azimuth angles over portions of three days, in an experimental characterization of a soybean field by means of its reflectances and physical and agronomic attributes. Results indicate that the distribution of reflectance from a soybean field is a function of the solar illumination and viewing geometry, wavelength, and row direction, as well as the state of canopy development. Shadows between rows were found to affect visible wavelength band reflectance to a greater extent than near-IR reflectance. A model describing reflectance variation as a function of projected solar and viewing angles is proposed, which approximates the visible wavelength band reflectance variations of a canopy with a well-defined row structure.

Automation and uncertainty analysis of a method for in-vivo range verification in particle therapy.

PubMed

Frey, K; Unholtz, D; Bauer, J; Debus, J; Min, C H; Bortfeld, T; Paganetti, H; Parodi, K

2014-10-07

We introduce the automation of the range difference calculation deduced from particle-irradiation induced β(+)-activity distributions with the so-called most-likely-shift approach, and evaluate its reliability via the monitoring of algorithm- and patient-specific uncertainty factors. The calculation of the range deviation is based on the minimization of the absolute profile differences in the distal part of two activity depth profiles shifted against each other. Depending on the workflow of positron emission tomography (PET)-based range verification, the two profiles under evaluation can correspond to measured and simulated distributions, or only measured data from different treatment sessions. In comparison to previous work, the proposed approach includes an automated identification of the distal region of interest for each pair of PET depth profiles and under consideration of the planned dose distribution, resulting in the optimal shift distance. Moreover, it introduces an estimate of uncertainty associated to the identified shift, which is then used as weighting factor to 'red flag' problematic large range differences. Furthermore, additional patient-specific uncertainty factors are calculated using available computed tomography (CT) data to support the range analysis. The performance of the new method for in-vivo treatment verification in the clinical routine is investigated with in-room PET images for proton therapy as well as with offline PET images for proton and carbon ion therapy. The comparison between measured PET activity distributions and predictions obtained by Monte Carlo simulations or measurements from previous treatment fractions is performed. For this purpose, a total of 15 patient datasets were analyzed, which were acquired at Massachusetts General Hospital and Heidelberg Ion-Beam Therapy Center with in-room PET and offline PET/CT scanners, respectively. Calculated range differences between the compared activity distributions are reported in a 2D map in beam-eye-view. In comparison to previously proposed approaches, the new most-likely-shift method shows more robust results for assessing in-vivo the range from strongly varying PET distributions caused by differing patient geometry, ion beam species, beam delivery techniques, PET imaging concepts and counting statistics. The additional visualization of the uncertainties and the dedicated weighting strategy contribute to the understanding of the reliability of observed range differences and the complexity in the prediction of activity distributions. The proposed method promises to offer a feasible technique for clinical routine of PET-based range verification.

Automation and uncertainty analysis of a method for in-vivo range verification in particle therapy

NASA Astrophysics Data System (ADS)

Frey, K.; Unholtz, D.; Bauer, J.; Debus, J.; Min, C. H.; Bortfeld, T.; Paganetti, H.; Parodi, K.

2014-10-01

We introduce the automation of the range difference calculation deduced from particle-irradiation induced β+-activity distributions with the so-called most-likely-shift approach, and evaluate its reliability via the monitoring of algorithm- and patient-specific uncertainty factors. The calculation of the range deviation is based on the minimization of the absolute profile differences in the distal part of two activity depth profiles shifted against each other. Depending on the workflow of positron emission tomography (PET)-based range verification, the two profiles under evaluation can correspond to measured and simulated distributions, or only measured data from different treatment sessions. In comparison to previous work, the proposed approach includes an automated identification of the distal region of interest for each pair of PET depth profiles and under consideration of the planned dose distribution, resulting in the optimal shift distance. Moreover, it introduces an estimate of uncertainty associated to the identified shift, which is then used as weighting factor to ‘red flag’ problematic large range differences. Furthermore, additional patient-specific uncertainty factors are calculated using available computed tomography (CT) data to support the range analysis. The performance of the new method for in-vivo treatment verification in the clinical routine is investigated with in-room PET images for proton therapy as well as with offline PET images for proton and carbon ion therapy. The comparison between measured PET activity distributions and predictions obtained by Monte Carlo simulations or measurements from previous treatment fractions is performed. For this purpose, a total of 15 patient datasets were analyzed, which were acquired at Massachusetts General Hospital and Heidelberg Ion-Beam Therapy Center with in-room PET and offline PET/CT scanners, respectively. Calculated range differences between the compared activity distributions are reported in a 2D map in beam-eye-view. In comparison to previously proposed approaches, the new most-likely-shift method shows more robust results for assessing in-vivo the range from strongly varying PET distributions caused by differing patient geometry, ion beam species, beam delivery techniques, PET imaging concepts and counting statistics. The additional visualization of the uncertainties and the dedicated weighting strategy contribute to the understanding of the reliability of observed range differences and the complexity in the prediction of activity distributions. The proposed method promises to offer a feasible technique for clinical routine of PET-based range verification.

Graphing Calculators in the Secondary Mathematics Classroom. Monograph #21.

ERIC Educational Resources Information Center

Eckert, Paul; And Others

The objective of this presentation is to focus on the use of a hand-held graphics calculator. The specific machine referred to in this monograph is the Casio fx-7000G, chosen because of its low cost, its large viewing screen, its versatility, and its simple operation. Sections include: (1) "Basic Operations with the Casio fx-7000G"; (2) "Graphical…

Molecular understanding of mutagenicity using potential energy methods. Progress report, July 1, 1992--September 30, 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Broyde, S.; Shapiro, R.

1993-09-01

Our objective has been to elucidate on a molecular level, at atomic resolution, the structures of DNAs modified by highly mutagenic aromatic amines and hydrocarbons. The underlying hypothesis is that DNA replicates with reduced fidelity when its normal right-handed B-structure is altered, and one result is a higher mutation rate. This change in structure may occur normally at a low incidence but it may be enhanced greatly after covalent modification by a mutagenic substance. The methods that we use to elucidate structures are computational, but we keep in close contact with experimental developments, and we incorporate data from NMR studiesmore » in our calculations when they are available. X-ray and low resolution spectroscopic studies have not succeeded in producing atomic resolution views of mutagen and carcinogen-oligonucleotide adducts. Even the high resolution NMR method cannot alone yield molecular views, though it does so in combination with our computations. The specific methods that we employ are minimized potential energy calculations using the torsion angle space molecular mechanics program DUPLEX to yield static views. Molecular dynamics simulations of static structures with solvent and salt can be carried out with the program AMBER; this yields mobile views in a medium that mimics aspects of the natural aqueous environment of the cell.« less

An effective method to accurately calculate the phase space factors for β - β - decay

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neacsu, Andrei; Horoi, Mihai

2016-01-01

Accurate calculations of the electron phase space factors are necessary for reliable predictions of double-beta decay rates and for the analysis of the associated electron angular and energy distributions. Here, we present an effective method to calculate these phase space factors that takes into account the distorted Coulomb field of the daughter nucleus, yet it allows one to easily calculate the phase space factors with good accuracy relative to the most exact methods available in the recent literature.

Parent and child screen-viewing time and home media environment.

PubMed

Jago, Russell; Stamatakis, Emmanuel; Gama, Augusta; Carvalhal, Isabel Mourão; Nogueira, Helena; Rosado, Vítor; Padez, Cristina

2012-08-01

Screen-viewing time has been associated with adverse health outcomes. Data on the predictors of youth screen-viewing time is predominately from older children in North America. Parental and home media environment factors that are associated with screen-viewing time could be targeted in interventions. Examine if parental screen-viewing time and electronic media (access to game equipment, TVs, PCs, and laptops) environment factors were associated with Portuguese children's screen-viewing time and if associations differed by child age (<7 vs ≥7 years); gender; or type of screen viewing. Data are reported for 2965 families with children aged 3-10 years. Data were collected in 2009-2010 and analyzed in 2011. Outcomes were child spending ≥2 hours watching TV and ≥1 hour per day playing with combined other media. Exposures were mothers and fathers watching ≥2 hours of TV and electronic media variables. Parental TV-viewing time was strongly associated with child weekday and weekend TV-viewing time across all four gender and age subgroups. Maternal TV-viewing time was a stronger predictor of child TV-viewing time than paternal TV-viewing time. There was very limited evidence that parental TV-viewing time was associated with combined other media time among boys or girls. Access to electronic game equipment increased the likelihood that children spent >1 hour using combined other media on weekdays and weekend days. Parental TV-viewing time was associated with Portuguese children's TV-viewing time. The numbers of TVs in the household and electronic games equipment access were also associated with TV- and combined other media-viewing/usage time. Copyright © 2012 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Methods to model and predict the ViewRay treatment deliveries to aid patient scheduling and treatment planning.

PubMed

Liu, Shi; Wu, Yu; Wooten, H Omar; Green, Olga; Archer, Brent; Li, Harold; Yang, Deshan

2016-03-08

A software tool is developed, given a new treatment plan, to predict treatment delivery time for radiation therapy (RT) treatments of patients on ViewRay magnetic resonance image-guided radiation therapy (MR-IGRT) delivery system. This tool is necessary for managing patient treatment scheduling in our clinic. The predicted treatment delivery time and the assessment of plan complexities could also be useful to aid treatment planning. A patient's total treatment delivery time, not including time required for localization, is modeled as the sum of four components: 1) the treatment initialization time; 2) the total beam-on time; 3) the gantry rotation time; and 4) the multileaf collimator (MLC) motion time. Each of the four components is predicted separately. The total beam-on time can be calculated using both the planned beam-on time and the decay-corrected dose rate. To predict the remain-ing components, we retrospectively analyzed the patient treatment delivery record files. The initialization time is demonstrated to be random since it depends on the final gantry angle of the previous treatment. Based on modeling the relationships between the gantry rotation angles and the corresponding rotation time, linear regression is applied to predict the gantry rotation time. The MLC motion time is calculated using the leaves delay modeling method and the leaf motion speed. A quantitative analysis was performed to understand the correlation between the total treatment time and the plan complexity. The proposed algorithm is able to predict the ViewRay treatment delivery time with the average prediction error 0.22min or 1.82%, and the maximal prediction error 0.89 min or 7.88%. The analysis has shown the correlation between the plan modulation (PM) factor and the total treatment delivery time, as well as the treatment delivery duty cycle. A possibility has been identified to significantly reduce MLC motion time by optimizing the positions of closed MLC pairs. The accuracy of the proposed prediction algorithm is sufficient to support patient treatment appointment scheduling. This developed software tool is currently applied in use on a daily basis in our clinic, and could also be used as an important indicator for treatment plan complexity.

A technique for automatically extracting useful field of view and central field of view images.

PubMed

Pandey, Anil Kumar; Sharma, Param Dev; Aheer, Deepak; Kumar, Jay Prakash; Sharma, Sanjay Kumar; Patel, Chetan; Kumar, Rakesh; Bal, Chandra Sekhar

2016-01-01

It is essential to ensure the uniform response of the single photon emission computed tomography gamma camera system before using it for the clinical studies by exposing it to uniform flood source. Vendor specific acquisition and processing protocol provide for studying flood source images along with the quantitative uniformity parameters such as integral and differential uniformity. However, a significant difficulty is that the time required to acquire a flood source image varies from 10 to 35 min depending both on the activity of Cobalt-57 flood source and the pre specified counts in the vendors protocol (usually 4000K-10,000K counts). In case the acquired total counts are less than the total prespecified counts, and then the vendor's uniformity processing protocol does not precede with the computation of the quantitative uniformity parameters. In this study, we have developed and verified a technique for reading the flood source image, remove unwanted information, and automatically extract and save the useful field of view and central field of view images for the calculation of the uniformity parameters. This was implemented using MATLAB R2013b running on Ubuntu Operating system and was verified by subjecting it to the simulated and real flood sources images. The accuracy of the technique was found to be encouraging, especially in view of practical difficulties with vendor-specific protocols. It may be used as a preprocessing step while calculating uniformity parameters of the gamma camera in lesser time with fewer constraints.

View angle effects on relationships between leaf area index in wheat and vegetation indices

NASA Astrophysics Data System (ADS)

Chen, H.; Li, W.; Huang, W.; Niu, Z.

2016-12-01

The effects of plant types and view angles on the canopy-reflected spectrum can not be ignored in the estimation of leaf area index (LAI) using remote sensing vegetation indices. While vegetation indices derived from nadir-viewing remote sensors are insufficient in leaf area index (LAI) estimation because of its misinterpretation of structural characteristecs, vegetation indices derived from multi-angular remote sensors have potential to improve detection of LAI. However, view angle effects on relationships between these indices and LAI for low standing crops (i.e. wheat) has not been fully evaluated and thus limits them to applied for consistent and accurate monitoring of vegetation. View angles effects of two types of winter wheat (wheat 411, erectophile; and wheat 9507, planophile) on relationship between LAI and spectral reflectance are assessed and compared in this study. An evaluation is conducted with in-situ measurements of LAI and bidirectional reflectance in the principal plane from -60° (back-scattering direction ) ot 60° (forward scattering direction) in the growth cycle of winter wheat. A variety of vegetation indices (VIs) published are calculated by BRDF. Additionally, all combinations of the bands are used in order to calculate Normalized difference Spectral Indices (NDSI) and Simple Subtraction Indices (SSI). The performance of the above indices along with raw reflectance and reflectance derivatives on LAI estimation are examined based on a linearity comparison. The results will be helpful in further developing multi-angle remote sensing models for accurate LAI evaluation.

What Students Say about Homework--Views from a Secondary School Science Classroom in Trinidad and Tobago

ERIC Educational Resources Information Center

Maharaj-Sharma, Rawatee; Sharma, Amrit

2016-01-01

Students' experiences with homework started the moment they enter the schooling system, yet very little is known about how students view homework. In this work, science students' views of homework, and the factors or experiences that have influenced their views of homework are explored. The participants for this work were 34 secondary school…

Young Australians' use of pornography and associations with sexual risk behaviours.

PubMed

Lim, Megan S C; Agius, Paul A; Carrotte, Elise R; Vella, Alyce M; Hellard, Margaret E

2017-08-01

Amid public health concern that rising pornography use may have a negative impact on young people's health and wellbeing, we report prevalence of pornography viewing and explore factors associated with viewing frequency and age at first viewing. Cross-sectional online survey in a convenience sample of Victorians aged 15 to 29 years recruited via social media. Ever viewing pornography was reported by 815 of 941 (87%) participants. The median age at first pornography viewing was 13 years for men and 16 years for women. More frequent pornography viewing was associated with male gender, younger age, higher education, non-heterosexual identity, ever having anal intercourse and recent mental health problems. Younger age at first pornography viewing was associated with male gender, younger current age, higher education, non-heterosexual identity, younger age at first sexual contact and recent mental health problems. Pornography use is common and associated with some health and behavioural outcomes. Longitudinal research is needed to determine the causal impact of pornography on these factors. Implications for public health: Viewing pornography is common and frequent among young people from a young age and this needs to be considered in sexuality education. © 2017 The Authors.

Calculation of the Nucleon Axial Form Factor Using Staggered Lattice QCD

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyer, Aaron S.; Hill, Richard J.; Kronfeld, Andreas S.

The nucleon axial form factor is a dominant contribution to errors in neutrino oscillation studies. Lattice QCD calculations can help control theory errors by providing first-principles information on nucleon form factors. In these proceedings, we present preliminary results on a blinded calculation ofmore » $$g_A$$ and the axial form factor using HISQ staggered baryons with 2+1+1 flavors of sea quarks. Calculations are done using physical light quark masses and are absolutely normalized. We discuss fitting form factor data with the model-independent $z$ expansion parametrization.« less

Total Ambient Dose Equivalent Buildup Factor Determination for Nbs04 Concrete.

PubMed

Duckic, Paulina; Hayes, Robert B

2018-06-01

Buildup factors are dimensionless multiplicative factors required by the point kernel method to account for scattered radiation through a shielding material. The accuracy of the point kernel method is strongly affected by the correspondence of analyzed parameters to experimental configurations, which is attempted to be simplified here. The point kernel method has not been found to have widespread practical use for neutron shielding calculations due to the complex neutron transport behavior through shielding materials (i.e. the variety of interaction mechanisms that neutrons may undergo while traversing the shield) as well as non-linear neutron total cross section energy dependence. In this work, total ambient dose buildup factors for NBS04 concrete are calculated in terms of neutron and secondary gamma ray transmission factors. The neutron and secondary gamma ray transmission factors are calculated using MCNP6™ code with updated cross sections. Both transmission factors and buildup factors are given in a tabulated form. Practical use of neutron transmission and buildup factors warrants rigorously calculated results with all associated uncertainties. In this work, sensitivity analysis of neutron transmission factors and total buildup factors with varying water content has been conducted. The analysis showed significant impact of varying water content in concrete on both neutron transmission factors and total buildup factors. Finally, support vector regression, a machine learning technique, has been engaged to make a model based on the calculated data for calculation of the buildup factors. The developed model can predict most of the data with 20% relative error.

Influence of sky view factor on outdoor thermal environment and physiological equivalent temperature

NASA Astrophysics Data System (ADS)

He, Xiaodong; Miao, Shiguang; Shen, Shuanghe; Li, Ju; Zhang, Benzhi; Zhang, Ziyue; Chen, Xiujie

2015-03-01

Sky view factor (SVF), which is an indicator of urban canyon geometry, affects the surface energy balance, local air circulation, and outdoor thermal comfort. This study focused on a continuous and long-term meteorological observation system to investigate the effects of SVF on outdoor thermal conditions and physiological equivalent temperature (PET) in the central business district (CBD) of Beijing (which is located within Chaoyang District), specifically addressed current knowledge gaps for SVF-PET relationships in cities with typical continental/microthermal climates. An urban sub-domain scale model and the RayMan model were used to diagnose wind fields and to calculate SVF and long-term PET, respectively. Analytical results show that the extent of shading contributes to variations in thermal perception distribution. Highly shaded areas (SVF <0.3) typically exhibit less frequent hot conditions during summer, while enduring longer periods of cold discomfort in winter than moderately shaded areas (0.3< SVF <0.5) and slightly shaded areas (SVF >0.5), and vice versa. Because Beijing has a monsoon-influenced humid continental climate with hot summers and long, cold, windy, and dry winters, a design project that ideally provides moderate shading should be planned to balance hot discomfort in summer and cold discomfort in winter, which effectively prolongs the comfort periods in outdoor spaces throughout the entire year. This research indicate that climate zone characteristics, urban environmental conditions, and thermal comfort requirements of residents must be accounted for in local-scale scientific planning and design, i.e., for urban canyon streets and residential estates.

Cross-Cultural Adaptation and Validation of the MPAM-R to Brazilian Portuguese and Proposal of a New Method to Calculate Factor Scores

PubMed Central

Albuquerque, Maicon R.; Lopes, Mariana C.; de Paula, Jonas J.; Faria, Larissa O.; Pereira, Eveline T.; da Costa, Varley T.

2017-01-01

In order to understand the reasons that lead individuals to practice physical activity, researchers developed the Motives for Physical Activity Measure-Revised (MPAM-R) scale. In 2010, a translation of MPAM-R to Portuguese and its validation was performed. However, psychometric measures were not acceptable. In addition, factor scores in some sports psychology scales are calculated by the mean of scores by items of the factor. Nevertheless, it seems appropriate that items with higher factor loadings, extracted by Factor Analysis, have greater weight in the factor score, as items with lower factor loadings have less weight in the factor score. The aims of the present study are to translate, validate the MPAM-R for Portuguese versions, and investigate agreement between two methods used to calculate factor scores. Three hundred volunteers who were involved in physical activity programs for at least 6 months were collected. Confirmatory Factor Analysis of the 30 items indicated that the version did not fit the model. After excluding four items, the final model with 26 items showed acceptable model fit measures by Exploratory Factor Analysis, as well as it conceptually supports the five factors as the original proposal. When two methods are compared to calculate factors scores, our results showed that only “Enjoyment” and “Appearance” factors showed agreement between methods to calculate factor scores. So, the Portuguese version of the MPAM-R can be used in a Brazilian context, and a new proposal for the calculation of the factor score seems to be promising. PMID:28293203

Iranian staff nurses' views of their productivity and management factors improving and impeding it: a qualitative study.

PubMed

Dehghan Nayeri, Nahid; Nazari, Ali Akbar; Salsali, Mahvash; Ahmadi, Fazlollah; Adib Hajbaghery, Mohsen

2006-03-01

As the biggest proportion of hospital personnel, Iranian nurses have a major role in providing quality care to patients. Nursing managers and nurses no longer feel that nurses' work is valued and they are concerned about their productivity. Nurses' views about productivity and management factors affecting it have been identified as the most important aspects affecting productivity. Thus, this study assesses productivity from the nurse's view. A grounded theory approach was used for this research. Purposive sampling and semistructured interviews were used. The data were analyzed using constant comparative analysis. Most participants felt that the qualitative nature (effectiveness) of productivity is very important. Also, participants indicated that management is the most important factor that can promote or impede their productivity. They suggested that managers' performance and their skill level are the factors influencing productivity. Effective management can improve nurses' productivity and the quality of care that nurses provide.

Optimal Antibiotic Dosage for Chronic Kidney Disease Patient: A Pharmacological Manual for Oral Clinicians.

PubMed

Chidambaram, Ramasamy

2015-01-01

Chronic kidney disease, (CKD) a gradual and inevitable deterioration in renal function, is the disease with the most associations in dentistry. Dosage adjustment is one amongst the vital elements to be familiar with during their oral care. CKD patients take extended duration to filter out medications, therefore dosage must always be tailored under the supervision of nephrologist. The relished benefits from antibiotic could transform as anti-microbial resistance on their abuse and nephrotoxic when contraindicated drugs are encouraged. New patented drug belonging to oxazoliodine group has driven the researchers to handle the emerging AMR. The present communication discusses the pharmacological factors influencing in prescribing the antibiotics for CKD patient from the dentist's point of view. The formulas destined for calculating the optimal dosage of antibiotics have been documented to aid oral physicians.

Radiometry simulation within the end-to-end simulation tool SENSOR

NASA Astrophysics Data System (ADS)

Wiest, Lorenz; Boerner, Anko

2001-02-01

12 An end-to-end simulation is a valuable tool for sensor system design, development, optimization, testing, and calibration. This contribution describes the radiometry module of the end-to-end simulation tool SENSOR. It features MODTRAN 4.0-based look up tables in conjunction with a cache-based multilinear interpolation algorithm to speed up radiometry calculations. It employs a linear reflectance parameterization to reduce look up table size, considers effects due to the topology of a digital elevation model (surface slope, sky view factor) and uses a reflectance class feature map to assign Lambertian and BRDF reflectance properties to the digital elevation model. The overall consistency of the radiometry part is demonstrated by good agreement between ATCOR 4-retrieved reflectance spectra of a simulated digital image cube and the original reflectance spectra used to simulate this image data cube.

Reassessment of structure of smectic phases: Nano-segregation in smectic E phase in 4-n-alkyl-4'-isothiocyanato-1,1'-biphenyls

NASA Astrophysics Data System (ADS)

Saito, Kazuya; Miyazawa, Takahito; Fujiwara, Akio; Hishida, Mafumi; Saitoh, Hideki; Massalska-Arodź, Maria; Yamamura, Yasuhisa

2013-09-01

Based on new diffraction data from aligned samples of smectic E (SmE) phase of 4-n-alkyl-4'-isothiocyanato-1,1'-biphenyls, systematics against the alkyl chain length n is analyzed. In order to perform the analysis, the molecular form factor approximated by a box-shaped distribution is calculated while taking the rounding of the distribution at corners into account. The analysis clearly shows the nano-segregated layered structure, which does not fit to the traditional structural view of SmE phase but does fit to the model the present authors proposed recently. Some implications of this conclusion are discussed in relation to the importance of the molten state of alkyl chains in most of real mesogens revealed previously through thermodynamic analyses.

Monitoring results and analysis of thermal comfort conditions in experimental buildings for different heating systems and ventilation regimes during heating and cooling seasons

NASA Astrophysics Data System (ADS)

Gendelis, S.; Jakovičs, A.; Ratnieks, J.; Bandeniece, L.

2017-10-01

This paper focuses on the long-term monitoring of thermal comfort and discomfort parameters in five small test buildings equipped with different heating and cooling systems. Calculations of predicted percentage of dissatisfied people (PPD) index and discomfort factors are provided for the room in winter season running three different heating systems - electric heater, air-air heat pump and air-water heat pump, as well as for the summer cooling with split type air conditioning systems. It is shown that the type of heating/cooling system and its working regime has an important impact on thermal comfort conditions in observed room. Recommendations for the optimal operating regimes and choice of the heating system from the thermal comfort point of view are summarized.

Modelling gamma-ray light curves of phase-aligned millisecond pulsars

NASA Astrophysics Data System (ADS)

Chang, Shan; Zhang, Li; Li, Xiang; Jiang, Zejun

2018-04-01

Three gamma-ray millisecond pulsars (MSPs), PSR J1939+2134, PSR J1959+2048, and PSR J0034-0534, have been confirmed to have a common feature of phase-aligned in radio and gamma-ray bands. With a geometric (two-pole caustic) model and a physical outer gap model (revised 3D outer gap model) in a three dimensional (3D) retarded magnetic dipole with a perturbation magnetic field, the observed features of these MSPs are studied. In order to obtained the best-fitting model parameters, the Markov chain Monte Carlo technique is used and reasonable GeV band light curves for three MSPs are given. Our calculations indicate that MSPs emit high energy photons with smaller inclination angles (α ≈ 10°-50°), larger view angles (ζ ≈ 65°-100°), and smaller perturbation factor (ɛ ≈ -0.15-0.1). Note that the factor ɛ, describing the strength of the perturbed magnetic field, is all less than zero in these two models, so the magnetic field caused by current-induced play a leading role in the pulsed location of MSPs.

Rethinking 'risk' and self-management for chronic illness.

PubMed

Morden, Andrew; Jinks, Clare; Ong, Bie Nio

2012-02-01

Self-management for chronic illness is a current high profile UK healthcare policy. Policy and clinical recommendations relating to chronic illnesses are framed within a language of lifestyle risk management. This article argues the enactment of risk within current UK self-management policy is intimately related to neo-liberal ideology and is geared towards population governance. The approach that dominates policy perspectives to 'risk' management is critiqued for positioning people as rational subjects who calculate risk probabilities and act upon them. Furthermore this perspective fails to understand the lay person's construction and enactment of risk, their agenda and contextual needs when living with chronic illness. Of everyday relevance to lay people is the management of risk and uncertainty relating to social roles and obligations, the emotions involved when encountering the risk and uncertainty in chronic illness, and the challenges posed by social structural factors and social environments that have to be managed. Thus, clinical enactments of self-management policy would benefit from taking a more holistic view to patient need and seek to avoid solely communicating lifestyle risk factors to be self-managed.

Mt Agung (Bali) Eruption Plumes

Atmospheric Science Data Center

2018-05-23

article title:  Mt Agung (Bali) Eruption Plumes     View larger image ... 2017 (left) and calculated plume heights (right)   Volcanic eruptions can generate a significant amount of atmospheric aerosols ...

The Interactions of Television Uses and Gratifications.

ERIC Educational Resources Information Center

Rubin, Alan M.

Data from 464 adults were analyzed to provide a more heuristic paradigm for mass communication uses and gratifications research in a study of the interactive nature of television viewing motivations, viewing behavior, and attitude gratifications. Factor analysis located five principal television viewing motivations: passing time, information,…

Evaluation of Mother-Child Agreement and Factorial Structures of the SCARED Questionnaire in an Italian Clinical Sample

PubMed Central

Scaini, Simona; Ogliari, Anna; De Carolis, Ludovica; Bellodi, Laura; Di Serio, Clelia; Brombin, Chiara

2017-01-01

Background: A great part of the literature has confirmed the importance of both child and parents reports as source of factual information, especially for childhood emotional syndromes. In our study we aimed at: (i) calculating mother-child agreement and (ii) evaluating factorial structure of the Screen for Child Anxiety Related Emotional Disorders (SCARED) questionnaire in an Italian clinical sample. The novelty of this contribution is two-fold: first, from a clinical point of view, we investigated the parent-child agreement level and examined separately the factorial structures of both parent and child versions of the SCARED for the first time in an Italian clinical sample. Second, unlike previous studies, we used statistical approaches specifically suited to account for the ordinal nature of the collected variables. Method: In a clinical sample of 171 children and adolescents aged 8–18 and their mothers we evaluated inter-rater agreement using weighted kappa indices to assess agreement for each item belonging to a certain SCARED subscale. Exploratory factor analysis for ordinal data was then performed on the polychoric correlation matrix calculated on SCARED items. Differences in the numbers of symptoms reported by children and parents were evaluated as well. Results and Conclusions: Our results reveal moderate to strong mother-child agreement. A significant age effect is present. Two different factorial solutions emerged for parent and child SCARED versions (a 5 factor structure for parents and a 6 factor solution in the child version, including a new factor “Worry about Parents”). This study confirmed the importance of evaluating both child and parent reports in assessment protocols for anxiety disorders. Our findings could help clinicians to determine which information, and from which rater, must be accounted for in evaluating treatment decisions. Moreover, we find that patients characteristics, such as gender and age, should be taken into account when assessing agreement. PMID:28286488

The impact of social media promotion with infographics and podcasts on research dissemination and readership.

PubMed

Thoma, Brent; Murray, Heather; Huang, Simon York Ming; Milne, William Ken; Martin, Lynsey J; Bond, Christopher M; Mohindra, Rohit; Chin, Alvin; Yeh, Calvin H; Sanderson, William B; Chan, Teresa M

2018-03-01

In 2015 and 2016, the Canadian Journal of Emergency Medicine (CJEM) Social Media (SoMe) Team collaborated with established medical websites to promote CJEM articles using podcasts and infographics while tracking dissemination and readership. CJEM publications in the "Original Research" and "State of the Art" sections were selected by the SoMe Team for podcast and infographic promotion based on their perceived interest to emergency physicians. A control group was composed retrospectively of articles from the 2015 and 2016 issues with the highest Altmetric score that received standard Facebook and Twitter promotions. Studies on SoMe topics were excluded. Dissemination was quantified by January 1, 2017 Altmetric scores. Readership was measured by abstract and full-text views over a 3-month period. The number needed to view (NNV) was calculated by dividing abstract views by full-text views. Twenty-nine of 88 articles that met inclusion were included in the podcast (6), infographic (11), and control (12) groups. Descriptive statistics (mean, 95% confidence interval) were calculated for podcast (Altmetric: 61, 42-80; Abstract: 1795, 1135-2455; Full-text: 431, 0-1031), infographic (Altmetric: 31.5, 19-43; Abstract: 590, 361-819; Full-text: 65, 33-98), and control (Altmetric: 12, 8-15; Abstract: 257, 159-354; Full-Text: 73, 38-109) articles. The NNV was 4.2 for podcast, 9.0 for infographic, and 3.5 for control articles. Discussion Limitations included selection bias, the influence of SoMe promotion on the Altmetric scores, and a lack of generalizability to other journals. Collaboration with established SoMe websites using podcasts and infographics was associated with increased Altmetric scores and abstract views but not full-text article views.

Usefulness of the novel risk estimation software, Heart Risk View, for the prediction of cardiac events in patients with normal myocardial perfusion SPECT.

PubMed

Sakatani, Tomohiko; Shimoo, Satoshi; Takamatsu, Kazuaki; Kyodo, Atsushi; Tsuji, Yumika; Mera, Kayoko; Koide, Masahiro; Isodono, Koji; Tsubakimoto, Yoshinori; Matsuo, Akiko; Inoue, Keiji; Fujita, Hiroshi

2016-12-01

Myocardial perfusion single-photon emission-computed tomography (SPECT) can predict cardiac events in patients with coronary artery disease with high accuracy; however, pseudo-negative cases sometimes occur. Heart Risk View, which is based on the prospective cohort study (J-ACCESS), is a software for evaluating cardiac event probability. We examined whether Heart Risk View was useful to evaluate the cardiac risk in patients with normal myocardial perfusion SPECT (MPS). We studied 3461 consecutive patients who underwent MPS to detect myocardial ischemia and those who had normal MPS were enrolled in this study (n = 698). We calculated cardiac event probability by Heart Risk View and followed-up for 3.8 ± 2.4 years. The cardiac events were defined as cardiac death, non-fatal myocardial infarction, and heart failure requiring hospitalization. During the follow-up period, 21 patients (3.0 %) had cardiac events. The event probability calculated by Heart Risk View was higher in the event group (5.5 ± 2.6 vs. 2.9 ± 2.6 %, p < 0.001). According to the receiver-operating characteristics curve, the cut-off point of the event probability for predicting cardiac events was 3.4 % (sensitivity 0.76, specificity 0.72, and AUC 0.85). Kaplan-Meier curves revealed that a higher event rate was observed in the high-event probability group by the log-rank test (p < 0.001). Although myocardial perfusion SPECT is useful for the prediction of cardiac events, risk estimation by Heart Risk View adds more prognostic information, especially in patients with normal MPS.

The mediating effects of dietary habits on the relationship between television viewing and body mass index among youth.

PubMed

Carson, Valerie; Janssen, Ian

2012-10-01

There is evidence to suggest that excessive television viewing is an independent determinant of obesity in young people. However, the pathways between television viewing and obesity are not fully understood. Therefore, the purpose of this study was to examine whether the relationship between television and body mass index (BMI) is mediated by television snacking and junk food consumption. Results are based on 15,973 youth in grades 6-10 who participated in the Canadian 2009/2010 health behaviour in school-aged children survey (HBSC). Participants self-reported their weight and height and BMI z-scores were calculated based on World Health Organization growth standards. Participants reported the frequency of snacking while watching television and the frequency of eating junk food (sweets, soft drinks, baked goods, French fries, potato chips). Total hours per week of television were calculated. A contemporary multiple mediation analysis was used to examine associations. A modest positive relationship was observed between television viewing and BMI. The mean BMI z-score was 0.15 units higher in youth in the highest television viewing quartile by comparison with the youth in the lowest quartile. However, contrary to our hypothesis, television snacking and junk food consumption were not significant positive mediators of the television and BMI relationship. The pathways between television viewing and obesity are complicated and remain poorly understood. Future research using longitudinal or experimental designs, more precise measurement tools and formal mediation analyses is needed. This research should consider mediators related to both energy intake and expenditure. © 2012 The Authors. Pediatric Obesity © 2012 International Association for the Study of Obesity.

Design of a hybrid emissivity domestic electric oven

NASA Astrophysics Data System (ADS)

Isik, Ozgur; Onbasioglu, Seyhan Uygur

2017-10-01

In this study, the radiative properties of the surfaces of an electric oven were investigated. Using experimental data related to an oven-like enclosure, a novel combination of surface properties was developed. Three different surface emissivity combinations were analysed experimentally: low-emissivity, high emissivity (black-coated), and hybrid emissivity. The term "hybrid emissivity design" here corresponds to an enclosure with some high emissive and some low-emissive surfaces. The experiments were carried out according to the EN 50304 standard. When a brick (load) was placed in the enclosure, the view factors between its surfaces were calculated with the Monte Carlo method. These and the measured surface temperatures were then used to calculate the radiative heat fluxes on the surfaces of the load. The three different models were compared with respect to energy consumption and baking time. The hybrid model performed best, with the highest radiative heat transfer between the surfaces of the enclosure and the load and minimum heat loss from the cavity. Thus, it was the most efficient model with the lowest energy consumption and the shortest baking time. The recent European Union regulation regarding the energy labelling of domestic ovens was used.

[Analysis of the geographical distribution of cases of leprosy. Rio de Janeiro, 2001-2012].

PubMed

Gracie, Renata; Peixoto, Julia Novaes de Barros; Soares, Fabiane Bertoni Dos Reis; Hacker, Mariana de Andrea Vilas-Boas

2017-05-01

Studies have demonstrated that the geographical distribution of leprosy is related to different socioeconomic factors. This article aims to study the geographical distribution of leprosy in the state of Rio de Janeiro. The cases of leprosy reported in the 2001-2012 period were mapped according to municipality. Epidemiological and socioeconomic indicators were calculated. The ArcMap program was used for the construction of maps and Earth View to calculate the Bayesian rate. It was observed that leprosy is presented in hyper-endemic levels especially in the metropolitan area. However, there is also a reduction of the detection rate in the most recent study period. In municipalities in the metropolitan region and the north western region detection in children under 15 is high, indicating an active transmission situation. In municipalities in the south-central region and especially in the coastal region, there was a high proportion of cases diagnosed with level II disability, reflecting late diagnosis. There was no linear correlation between socioeconomic indicators and leprosy rate. These results contribute to the analysis of the geographical distribution of leprosy, important for the identification of areas for resource allocation, aiming to control and eliminate the disease.

Factors affecting the views and attitudes of Scottish pharmacists to continuing professional development.

PubMed

Power, Ailsa; Grammatiki, Aikaterini; Bates, Ian; Mc Kellar, Susan; Johnson, B Julienne; Diack, H Lesley; Stewart, Derek; Hudson, Steve A

2011-12-01

To explore factors associated with Scottish pharmacists' views and attitudes to continuing professional development (CPD). A retrospective principal component analysis of 552 (22.8%) questionnaires returned from a sample of 2420 Scottish pharmacists randomly selected from the 4300 pharmacists registered with the Royal Pharmaceutical Society of Great Britain and with a Scottish address. Principal component analysis of questionnaire items (n = 19) revealed four factors associated with Scottish pharmacists' views and attitudes to CPD: having positive support in the workplace, having access to resources and meeting learning needs, having confidence in the CPD process and motivation to participate in the CPD process. Community pharmacists were identified as the subgroup of pharmacists that needed most support for CPD regarding all four factors, while pharmacists working in primary care felt that they had most support in the workplace in comparison to other sectors (P < 0.05) and better access to resources and meeting learning needs when compared to community (P < 0.001) and hospital (P = 0.008) colleagues. Pharmacists working in primary care also felt more motivated to participate in the CPD process than those in the community (P < 0.001), and hospital pharmacists reported having more confidence in the CPD process compared to community pharmacists (P < 0.05). Using principal component analysis has identified four factors associated with Scottish pharmacists' views and attitudes to CPD. This may provide an approach to facilitate comparison of CPD views and attitudes with intra and inter professional groupings. Further study may allow identification of good practice and solutions to common CPD issues. © 2011 The Authors. IJPP © 2011 Royal Pharmaceutical Society.

Use of a caudoventral-craniodorsal oblique radiographic view made at 45° to the frontal plane to evaluate the pectoral girdle in raptors.

PubMed

Visser, Marike; Hespel, Adrien-Maxence; de Swarte, Marie; Bellah, Jamie R

2015-11-01

To evaluate use of a caudoventral-craniodorsal oblique radiographic view made at 45° to the frontal plane (H view) for assessment of the pectoral (thoracic) girdle in raptors. Retrospective cross-sectional analysis. 24 raptors suspected to have a fracture of the thoracic girdle. Standard ventrodorsal and H views were obtained for all birds. Radiographs were evaluated twice by a radiologist blinded to the final diagnosis, with each view first evaluated independently and views then evaluated in combination. Sensitivity, specificity, positive predictive value, and negative predictive value were calculated, with results of surgery or necropsy used as the gold standard. 9 birds had thoracic girdle fractures; fractures were correctly identified in 8 of these 9 birds on the ventrodorsal view alone, 7 of these 9 birds on the H view alone, and all 9 birds on the 2 views in combination. Fifteen birds did not have thoracic girdle fractures; radiographs were correctly classified in 12 of these 15 birds when the ventrodorsal view was evaluated alone, all 15 birds when the H view was evaluated alone, and 14 of these 15 birds when the 2 views were evaluated in combination. Results suggested that the H view or the addition of the H view to the VD view could be useful in raptors suspected to have fractures of the thoracic girdle. Agreement with the gold standard (ie, fracture present or absent) was higher with the H view and combination of views than with the ventrodorsal view alone.

A Process View on Implementing an Antibullying Curriculum: How Teachers Differ and What Explains the Variation

ERIC Educational Resources Information Center

Haataja, Anne; Ahtola, Annarilla; Poskiparta, Elisa; Salmivalli, Christina

2015-01-01

The present study provides a person-centered view on teachers' adherence to the KiVa antibullying curriculum over a school year. Factor mixture modeling was used to examine how teachers (N = 282) differed in their implementation profiles and multinomial logistic regression was used to identify factors related to these profiles. On the basis of…

Libyan Children's Views on the Importance of School Factors Which Contributed to Their Emotional and Behavioral Difficulties

ERIC Educational Resources Information Center

Gadour, Abdelbasit

2006-01-01

A group of 34 children from mainstream schools in Libya representing four Local Education Authorities (LEAs) were interviewed about their emotional and behavioral difficulties (EBD) and the factors which might be responsible for their EBD. Although, in general, children's views of EBD did not yield remarkably different accounts to those already…

Miniaturized side-viewing imaging probe for fluorescence lifetime imaging (FLIM): validation with fluorescence dyes, tissue structural proteins and tissue specimens

PubMed Central

Elson, D S; Jo, J A

2007-01-01

We report a side viewing fibre-based endoscope that is compatible with intravascular imaging and fluorescence lifetime imaging microscopy (FLIM). The instrument has been validated through testing with fluorescent dyes and collagen and elastin powders using the Laguerre expansion deconvolution technique to calculate the fluorescence lifetimes. The instrument has also been tested on freshly excised unstained animal vascular tissues. PMID:19503759

Control of Hazards to Health From Laser Radiation

DTIC Science & Technology

2006-01-01

compared to the calculated AEL. (2) Optically aided viewing. Viewing a laser beam with optical aids (other than ordinary eyeglasses or contact lenses ...resonant optical cavity. TB MED 524 8 b. Lenses , mirrors, cooling systems, shutters, and other accessories may be added to the system to obtain...procedures for laser optical systems (for example, mirrors, prisms, and lenses ) that employ Class 2 and Class 3a lasers, it is always good laser safety

Japanese High School Teachers' Views on Pupil Misbehaviour

ERIC Educational Resources Information Center

Kyriacou, Chris

2010-01-01

This study aimed to explore Japanese high school teachers' views of pupil misbehaviour in order to contribute to the growing international literature on discipline in schools. A total of 141 Japanese high school teachers completed a questionnaire which explored their views regarding the factors accounting for pupil misbehaviour, the frequency of…

Context of STEM Integration in Schools: Views from In-Service Science Teachers

ERIC Educational Resources Information Center

EL-Deghaidy, Heba; Mansour, Nasser; Alzaghibi, Mohammad; Alhammad, Khalid

2017-01-01

This study explores science teachers' views regarding Science, Technology, Engineering and Mathematics (STEM) pedagogy and its interdisciplinary nature. It also seeks to identify teachers' views on the contextual factors that facilitate and hinder such pedagogy in their schools. Qualitative methodologies were used through focus group discussions…

Does Podcast Use Enhance Critical Thinking in Nursing Education?

PubMed

Blum, Cynthia A

The purpose of this pilot interventional study was to examine relationships between adjunctive podcast viewing and nursing students' critical thinking (CT) abilities. Participants were last semester/preceptorship nursing students. The intervention group was given unrestricted access to a CT podcast. There was no statistical significance between Health Sciences Reasoning Test pretest and posttest scores, the number of times the podcast was viewed, and specific demographic factors. The results suggest that CT podcast viewing did not improve CT abilities. However, Likert scale results indicated students liked this method of learning. Demographic factors and sample size were limited, and further research is recommended.

Attentional synchrony and the influence of viewing task on gaze behavior in static and dynamic scenes.

PubMed

Smith, Tim J; Mital, Parag K

2013-07-17

Does viewing task influence gaze during dynamic scene viewing? Research into the factors influencing gaze allocation during free viewing of dynamic scenes has reported that the gaze of multiple viewers clusters around points of high motion (attentional synchrony), suggesting that gaze may be primarily under exogenous control. However, the influence of viewing task on gaze behavior in static scenes and during real-world interaction has been widely demonstrated. To dissociate exogenous from endogenous factors during dynamic scene viewing we tracked participants' eye movements while they (a) freely watched unedited videos of real-world scenes (free viewing) or (b) quickly identified where the video was filmed (spot-the-location). Static scenes were also presented as controls for scene dynamics. Free viewing of dynamic scenes showed greater attentional synchrony, longer fixations, and more gaze to people and areas of high flicker compared with static scenes. These differences were minimized by the viewing task. In comparison with the free viewing of dynamic scenes, during the spot-the-location task fixation durations were shorter, saccade amplitudes were longer, and gaze exhibited less attentional synchrony and was biased away from areas of flicker and people. These results suggest that the viewing task can have a significant influence on gaze during a dynamic scene but that endogenous control is slow to kick in as initial saccades default toward the screen center, areas of high motion and people before shifting to task-relevant features. This default-like viewing behavior returns after the viewing task is completed, confirming that gaze behavior is more predictable during free viewing of dynamic than static scenes but that this may be due to natural correlation between regions of interest (e.g., people) and motion.

mHealth Series: mHealth project in Zhao County, rural China – Description of objectives, field site and methods

PubMed Central

van Velthoven, Michelle Helena; Li, Ye; Wang, Wei; Du, Xiaozhen; Wu, Qiong; Chen, Li; Majeed, Azeem; Rudan, Igor; Zhang, Yanfeng; Car, Josip

2013-01-01

Background We set up a collaboration between researchers in China and the UK that aimed to explore the use of mHealth in China. This is the first paper in a series of papers on a large mHealth project part of this collaboration. This paper included the aims and objectives of the mHealth project, our field site, and the detailed methods of two studies. Field site The field site for this mHealth project was Zhao County, which lies 280 km south of Beijing in Hebei Province, China. Methods We described the methodology of two studies: (i) a mixed methods study exploring factors influencing sample size calculations for mHealth–based health surveys and (ii) a cross–over study determining validity of an mHealth text messaging data collection tool. The first study used mixed methods, both quantitative and qualitative, including: (i) two surveys with caregivers of young children, (ii) interviews with caregivers, village doctors and participants of the cross–over study, and (iii) researchers’ views. We combined data from caregivers, village doctors and researchers to provide an in–depth understanding of factors influencing sample size calculations for mHealth–based health surveys. The second study, a cross–over study, used a randomised cross–over study design to compare the traditional face–to–face survey method to the new text messaging survey method. We assessed data equivalence (intrarater agreement), the amount of information in responses, reasons for giving different responses, the response rate, characteristics of non–responders, and the error rate. Conclusions This paper described the objectives, field site and methods of a large mHealth project part of a collaboration between researchers in China and the UK. The mixed methods study evaluating factors that influence sample size calculations could help future studies with estimating reliable sample sizes. The cross–over study comparing face–to–face and text message survey data collection could help future studies with developing their mHealth tools. PMID:24363919

Are Opinions Based on Science: Modelling Social Response to Scientific Facts

PubMed Central

Iñiguez, Gerardo; Tagüeña-Martínez, Julia; Kaski, Kimmo K.; Barrio, Rafael A.

2012-01-01

As scientists we like to think that modern societies and their members base their views, opinions and behaviour on scientific facts. This is not necessarily the case, even though we are all (over-) exposed to information flow through various channels of media, i.e. newspapers, television, radio, internet, and web. It is thought that this is mainly due to the conflicting information on the mass media and to the individual attitude (formed by cultural, educational and environmental factors), that is, one external factor and another personal factor. In this paper we will investigate the dynamical development of opinion in a small population of agents by means of a computational model of opinion formation in a co-evolving network of socially linked agents. The personal and external factors are taken into account by assigning an individual attitude parameter to each agent, and by subjecting all to an external but homogeneous field to simulate the effect of the media. We then adjust the field strength in the model by using actual data on scientific perception surveys carried out in two different populations, which allow us to compare two different societies. We interpret the model findings with the aid of simple mean field calculations. Our results suggest that scientifically sound concepts are more difficult to acquire than concepts not validated by science, since opposing individuals organize themselves in close communities that prevent opinion consensus. PMID:22905117

Are opinions based on science: modelling social response to scientific facts.

PubMed

Iñiguez, Gerardo; Tagüeña-Martínez, Julia; Kaski, Kimmo K; Barrio, Rafael A

2012-01-01

As scientists we like to think that modern societies and their members base their views, opinions and behaviour on scientific facts. This is not necessarily the case, even though we are all (over-) exposed to information flow through various channels of media, i.e. newspapers, television, radio, internet, and web. It is thought that this is mainly due to the conflicting information on the mass media and to the individual attitude (formed by cultural, educational and environmental factors), that is, one external factor and another personal factor. In this paper we will investigate the dynamical development of opinion in a small population of agents by means of a computational model of opinion formation in a co-evolving network of socially linked agents. The personal and external factors are taken into account by assigning an individual attitude parameter to each agent, and by subjecting all to an external but homogeneous field to simulate the effect of the media. We then adjust the field strength in the model by using actual data on scientific perception surveys carried out in two different populations, which allow us to compare two different societies. We interpret the model findings with the aid of simple mean field calculations. Our results suggest that scientifically sound concepts are more difficult to acquire than concepts not validated by science, since opposing individuals organize themselves in close communities that prevent opinion consensus.

Quantification of functional mitral regurgitation by real-time 3D echocardiography: comparison with 3D velocity-encoded cardiac magnetic resonance.

PubMed

Marsan, Nina Ajmone; Westenberg, Jos J M; Ypenburg, Claudia; Delgado, Victoria; van Bommel, Rutger J; Roes, Stijntje D; Nucifora, Gaetano; van der Geest, Rob J; de Roos, Albert; Reiber, Johan C; Schalij, Martin J; Bax, Jeroen J

2009-11-01

The aim of this study was to evaluate feasibility and accuracy of real-time 3-dimensional (3D) echocardiography for quantification of mitral regurgitation (MR), in a head-to-head comparison with velocity-encoded cardiac magnetic resonance (VE-CMR). Accurate grading of MR severity is crucial for appropriate patient management but remains challenging. VE-CMR with 3D three-directional acquisition has been recently proposed as the reference method. A total of 64 patients with functional MR were included. A VE-CMR acquisition was applied to quantify mitral regurgitant volume (Rvol). Color Doppler 3D echocardiography was applied for direct measurement, in "en face" view, of mitral effective regurgitant orifice area (EROA); Rvol was subsequently calculated as EROA multiplied by the velocity-time integral of the regurgitant jet on the continuous-wave Doppler. To assess the relative potential error of the conventional approach, color Doppler 2-dimensional (2D) echocardiography was performed: vena contracta width was measured in the 4-chamber view and EROA calculated as circular (EROA-4CH); EROA was also calculated as elliptical (EROA-elliptical), measuring vena contracta also in the 2-chamber view. From these 2D measurements of EROA, the Rvols were also calculated. The EROA measured by 3D echocardiography was significantly higher than EROA-4CH (p < 0.001) and EROA-elliptical (p < 0.001), with a significant bias between these measurements (0.10 cm(2) and 0.06 cm(2), respectively). Rvol measured by 3D echocardiography showed excellent correlation with Rvol measured by CMR (r = 0.94), without a significant difference between these techniques (mean difference = -0.08 ml/beat). Conversely, 2D echocardiographic approach from the 4-chamber view significantly underestimated Rvol (p = 0.006) as compared with CMR (mean difference = 2.9 ml/beat). The 2D elliptical approach demonstrated a better agreement with CMR (mean difference = -1.6 ml/beat, p = 0.04). Quantification of EROA and Rvol of functional MR with 3D echocardiography is feasible and accurate as compared with VE-CMR; the currently recommended 2D echocardiographic approach significantly underestimates both EROA and Rvol.

Nurses' views of factors affecting sleep for hospitalized children and their families: A focus group study.

PubMed

Stremler, Robyn; Adams, Sherri; Dryden-Palmer, Karen

2015-08-01

Light, noise, and interruptions from hospital staff lead to frequent awakenings and detrimental changes to sleep quantity and quality for children who are hospitalized and their parents who stay with them overnight. An understanding of nurses' views on how care affects sleep for the hospitalized child and parent is crucial to the development of strategies to decrease sleep disturbance in hospital. The purpose of this descriptive qualitative study was to gain an understanding of nurses' views on their role in and influence on sleep for families; perceived barriers and facilitators of patient and parent sleep at night; strategies nurses use to preserve sleep; the distribution, between parent and nurse, of care for the child at night; views of the parent as a recipient of nursing care at night; and the nature of interactions between nurses and families at night. Thirty registered nurses from general pediatric and critical care units participated in one of four semi-structured focus groups. Four main influences on sleep were identified: child factors; environmental factors; nurse-parent interaction factors; and nursing care factors. Some of these restricted nurses' ability to optimize sleep, but many factors were amenable to intervention. Balancing strategies to preserve sleep with the provision of nursing assessment and intervention was challenging and complicated by the difficult nature of work outside of usual waking hours. Nurses highlighted the need for formal policy and mentoring related to provision of nursing care at night in pediatric settings. © 2015 Wiley Periodicals, Inc.

Rapid Simultaneous Assessment of Riparian Shade and Buffer Width Using LiDAR Data

NASA Astrophysics Data System (ADS)

Seixas, G.; Beechie, T. J.; Kiffney, P.

2016-12-01

Riparian buffers perform a number of functions including provision of shade and wood recruitment to forested streams. Shade is a primary control on stream water temperature and recruitment of large wood is essential for the maintenance of key biological functions such as salmon and invertebrate habitat. Because temperature is a limiting factor for riverine primary production, many aquatic invertebrates, and endangered salmonid species, and because riparian forest structure has been modified by management practices for decades in many of the world's watersheds, rapid assessment of riparian shade and wood recruitment potential is critical for restoration decision-making. We introduce a new automated LiDAR-based method that simultaneously measures two key metrics of riparian vegetation condition—`view-to-sky' openness of the canopy and buffer width. If the height of historical mature trees in the area of interest is known or can be assumed, a change in view-to-sky angle due to land uses may be calculated. We apply the method to portions of the Chehalis River basin in southwestern Washington State, USA, an area of extensive logging and agriculture. We find a high level of modification to view-to-sky angle has occurred in urban and agricultural areas of the basin, whereas riparian shade is maintained by buffers in some regions of active logging. Buffers composed of trees large enough for wood recruitment have all but been eradicated from the basin. Due to the method's simplicity, ease of application and focus on deviation from natural conditions, it has the potential to be used effectively for river restoration planning at the watershed scale.

Battery longevity of implantable cardioverter-defibrillators and cardiac resynchronization therapy defibrillators: technical, clinical and economic aspects. An expert review paper from EHRA.

PubMed

Boriani, Giuseppe; Merino, Josè; Wright, David J; Gadler, Fredrik; Schaer, Beat; Landolina, Maurizio

2018-05-10

In recent years an extension of devices longevity has been obtained for implantable cardioverter-defibrillators (ICDs), including ICDs for cardiac resynchronization therapy (CRT-D) through improved battery chemistry and device technology and this implies important clinical benefits (reduced need for device replacements and associated complications, particularly infections), as well as economic benefits, in line with patient preferences and needs. From a clinical point of view, the availability of this improvement in technology allows to better tune the choice of the device to be implanted, taking into account that the reasons supporting the value of an extended device longevity as a clinical priority may differ according to the clinical setting (purely electrical diseases or left ventricular dysfunction/heart failure, respectively). From an economic point of view, extension of device longevity may have an important impact in reducing long-term costs of device therapy, with substantial daily savings in favour of devices with extended longevity, up to 30%, depending on clinical scenarios. In studies based on projections, an extension of device longevity allowed to calculate that the cost per day of ICDs may be substantially reduced, and this allows to overcome the frequent perception of ICD and CRT-D devices as treatments with unaffordable costs and to overturn the misconception that up-front costs are the only metric with which to value device treatments. In view of its clinical and economic value, device longevity should be a determining factor in device choice by physicians and healthcare commissioners and should be appropriately considered and valued in comparative tenders.

Collection and corrections of oblique multiangle hyperspectral bidirectional reflectance imagery of the water surface

NASA Astrophysics Data System (ADS)

Bostater, Charles R.; Oney, Taylor S.

2017-10-01

Hyperspectral images of coastal waters in urbanized regions were collected from fixed platform locations. Surf zone imagery, images of shallow bays, lagoons and coastal waters are processed to produce bidirectional reflectance factor (BRF) signatures corrected for changing viewing angles. Angular changes as a function of pixel location within a scene are used to estimate changes in pixel size and ground sampling areas. Diffuse calibration targets collected simultaneously from within the image scene provides the necessary information for calculating BRF signatures of the water surface and shorelines. Automated scanning using a pushbroom hyperspectral sensor allows imagery to be collected on the order of one minute or less for different regions of interest. Imagery is then rectified and georeferenced using ground control points within nadir viewing multispectral imagery via image to image registration techniques. This paper demonstrates the above as well as presenting how spectra can be extracted along different directions in the imagery. The extraction of BRF spectra along track lines allows the application of derivative reflectance spectroscopy for estimating chlorophyll-a, dissolved organic matter and suspended matter concentrations at or near the water surface. Imagery is presented demonstrating the techniques to identify subsurface features and targets within the littoral and surf zones.

Science Teachers' Views and Stereotypes of Religion, Scientists and Scientific Research: A call for scientist-science teacher partnerships to promote inquiry-based learning

NASA Astrophysics Data System (ADS)

Mansour, Nasser

2015-07-01

Despite a growing consensus regarding the value of inquiry-based learning (IBL) for students' learning and engagement in the science classroom, the implementation of such practices continues to be a challenge. If science teachers are to use IBL to develop students' inquiry practices and encourage them to think and act as scientists, a better understanding of factors that influence their attitudes towards scientific research and scientists' practices is very much needed. Within this context there is a need to re-examine the science teachers' views of scientists and the cultural factors that might have an impact on teachers' views and pedagogical practices. A diverse group of Egyptian science teachers took part in a quantitative-qualitative study using a questionnaire and in-depth interviews to explore their views of scientists and scientific research, and to understand how they negotiated their views of scientists and scientific research in the classroom, and how these views informed their practices of using inquiry in the classroom. The findings highlighted how the teachers' cultural beliefs and views of scientists and scientific research had constructed idiosyncratic pedagogical views and practices. The study suggested implications for further research and argued for teacher professional development based on partnerships with scientists.

The Views of Mathematics Teachers on the Factors Affecting the Integration of Technology in Mathematics Courses

ERIC Educational Resources Information Center

Kaleli-Yilmaz, Gül

2015-01-01

The aim of this study was to determine the views of mathematics teachers on the factors that affect the integration of technology in mathematic courses. It is a qualitative case study. The sample size of the study is 10 teachers who are receiving postgraduate education in a university in Turkey. The current study was conducted in three stages. At…

[The assessment of exposure to and the activity of the manual lifting of patients in wards: methods, procedures, the exposure index (MAPO) and classification criteria. Movimientazione e Assistenza Pazienti Ospedalizzati (Lifting and Assistance to Hospitalized Patients)].

PubMed

Menoni, O; Ricci, M G; Panciera, D; Occhipinti, E

1999-01-01

Since a method for quantifying exposure to patient handling in hospital wards is lacking, the authors describe and propose a model for identifying the main risk factors in this type of occupational exposure: presence of disabled patients, staff engaged on manual handling of patients, structure of the working environment, equipment and aids for moving patients, training of workers according to the specific risk. For each factor a procedure for identification and assessment is proposed that is easily applicable in practice. The authors also propose a formula for the calculation of a condensed exposure index (MAPO Index), which brings together the various factors. The exposure index, which requires further, detailed study and validation, makes it possible, in practice, to plan the preventive and health measures according to a specific order of priority, thus complying with the requirements of Chapter V of Law 626/94. From a practical point of view, in the present state of knowledge, it can be stated that for MAPO Index values between 0 and 1.5, risk is deemed negligible, average for values between 1.51 and 5, and high for values exceeding 5.

Genetics Home Reference: factor V deficiency

MedlinePlus

... Twitter Home Health Conditions Factor V deficiency Factor V deficiency Printable PDF Open All Close All Enable ... to view the expand/collapse boxes. Description Factor V deficiency is a rare bleeding disorder. The signs ...

Genetics Home Reference: factor X deficiency

MedlinePlus

... Twitter Home Health Conditions Factor X deficiency Factor X deficiency Printable PDF Open All Close All Enable ... to view the expand/collapse boxes. Description Factor X deficiency is a rare bleeding disorder that varies ...

The Cognitive-Developmental Approach to Inter-Ethnic Attitudes.

ERIC Educational Resources Information Center

Kohlberg, Lawrence; Davidson, Florence

Psychological research on race and ethnic stereotypes and attitudes has been carried out from two points of view -- a social learning view and a psychodynamic view. Neither of these grasp essential components of young children's ethnic attitudes or prejudices, nor do they detail the major developmental factors leading to the growth of tolerance…

Mentors' Views of Factors Essential for the Success of Beginning Teachers

ERIC Educational Resources Information Center

Barrera, Arnold; Braley, Richard; Slate, John R.

2008-01-01

The views of 46 mentors of first-year teachers were obtained regarding practices that they viewed as essential for their success in mentoring teachers. Specifically, they were queried about teacher involvement/support, staff development, administrative support, and resource materials. Almost all of the mentor teachers believed a teacher-mentoring…

Thermodynamic and Mechanical Analysis of a Thermomagnetic Rotary Engine

NASA Astrophysics Data System (ADS)

Fajar, D. M.; Khotimah, S. N.; Khairurrijal

2016-08-01

A heat engine in magnetic system had three thermodynamic coordinates: magnetic intensity ℋ, total magnetization ℳ, and temperature T, where the first two of them are respectively analogous to that of gaseous system: pressure P and volume V. Consequently, Carnot cycle that constitutes the principle of a heat engine in gaseous system is also valid on that in magnetic system. A thermomagnetic rotary engine is one model of it that was designed in the form of a ferromagnetic wheel that can rotates because of magnetization change at Curie temperature. The study is aimed to describe the thermodynamic and mechanical analysis of a thermomagnetic rotary engine and calculate the efficiencies. In thermodynamic view, the ideal processes are isothermal demagnetization, adiabatic demagnetization, isothermal magnetization, and adiabatic magnetization. The values of thermodynamic efficiency depend on temperature difference between hot and cold reservoir. In mechanical view, a rotational work is determined through calculation of moment of inertia and average angular speed. The value of mechanical efficiency is calculated from ratio between rotational work and heat received by system. The study also obtains exergetic efficiency that states the performance quality of the engine.

A single field of view method for retrieving tropospheric temperature profiles from cloud-contaminated radiance data

NASA Technical Reports Server (NTRS)

Hodges, D. B.

1976-01-01

An iterative method is presented to retrieve single field of view (FOV) tropospheric temperature profiles directly from cloud-contaminated radiance data. A well-defined temperature profile may be calculated from the radiative transfer equation (RTE) for a partly cloudy atmosphere when the average fractional cloud amount and cloud-top height for the FOV are known. A cloud model is formulated to calculate the fractional cloud amount from an estimated cloud-top height. The method is then examined through use of simulated radiance data calculated through vertical integration of the RTE for a partly cloudy atmosphere using known values of cloud-top height(s) and fractional cloud amount(s). Temperature profiles are retrieved from the simulated data assuming various errors in the cloud parameters. Temperature profiles are retrieved from NOAA-4 satellite-measured radiance data obtained over an area dominated by an active cold front and with considerable cloud cover and compared with radiosonde data. The effects of using various guessed profiles and the number of iterations are considered.

Numerical evaluation of moiré pattern in touch sensor module with electrode mesh structure in oblique view

NASA Astrophysics Data System (ADS)

Pournoury, M.; Zamiri, A.; Kim, T. Y.; Yurlov, V.; Oh, K.

2016-03-01

Capacitive touch sensor screen with the metal materials has recently become qualified for substitution of ITO; however several obstacles still have to be solved. One of the most important issues is moiré phenomenon. The visibility problem of the metal-mesh, in touch sensor module (TSM) is numerically considered in this paper. Based on human eye contract sensitivity function (CSF), moiré pattern of TSM electrode mesh structure is simulated with MATLAB software for 8 inch screen display in oblique view. Standard deviation of the generated moiré by the superposition of electrode mesh and screen image is calculated to find the optimal parameters which provide the minimum moiré visibility. To create the screen pixel array and mesh electrode, rectangular function is used. The filtered image, in frequency domain, is obtained by multiplication of Fourier transform of the finite mesh pattern (product of screen pixel and mesh electrode) with the calculated CSF function for three different observer distances (L=200, 300 and 400 mm). It is observed that the discrepancy between analytical and numerical results is less than 0.6% for 400 mm viewer distance. Moreover, in the case of oblique view due to considering the thickness of the finite film between mesh electrodes and screen, different points of minimum standard deviation of moiré pattern are predicted compared to normal view.

Computers and the Rational-Root Theorem--Another View.

ERIC Educational Resources Information Center

Waits, Bert K.; Demana, Franklin

1989-01-01

An approach to finding the rational roots of polynomial equations based on computer graphing is given. It integrates graphing with the purely algebraic approach. Either computers or graphing calculators can be used. (MNS)

Extending life for people with a terminal illness: a moral right and an expensive death? Exploring societal perspectives.

PubMed

McHugh, Neil; Baker, Rachel M; Mason, Helen; Williamson, Laura; van Exel, Job; Deogaonkar, Rohan; Collins, Marissa; Donaldson, Cam

2015-03-07

Many publicly-funded health systems apply cost-benefit frameworks in response to the moral dilemma of how best to allocate scarce healthcare resources. However, implementation of recommendations based on costs and benefit calculations and subsequent challenges have led to 'special cases' with certain types of health benefits considered more valuable than others. Recent debate and research has focused on the relative value of life extensions for people with terminal illnesses. This research investigates societal perspectives in relation to this issue, in the UK. Q methodology was used to elicit societal perspectives from a purposively selected sample of data-rich respondents. Participants ranked 49 statements of opinion (developed for this study), onto a grid, according to level of agreement. These 'Q sorts' were followed by brief interviews. Factor analysis was used to identify shared points of view (patterns of similarity between individuals' Q sorts). Analysis produced a three factor solution. These rich, shared accounts can be broadly summarised as: i) 'A population perspective - value for money, no special cases', ii) 'Life is precious - valuing life-extension and patient choice', iii) 'Valuing wider benefits and opportunity cost - the quality of life and death'. From the factor descriptions it is clear that the main philosophical positions that have long dominated debates on the just allocation of resources have a basis in public opinion. The existence of certain moral positions in the views of society does not ethically imply, and pragmatically cannot mean, that all are translated into policy. Our findings highlight normative tensions and the importance of critically engaging with these normative issues (in addition to the current focus on a procedural justice approach to health policy). Future research should focus on i) the extent to which these perspectives are supported in society, ii) how respondents' perspectives relate to specific resource allocation questions, and iii) the characteristics of respondents associated with each perspective.

Organic Field Effect Transistors for Large Format Electronics

DTIC Science & Technology

2003-06-19

calculated output characteristics for a p-channel substrate insulator Organic layer Source Drain Gate 6 pentacene OFET with 2µm source to drain spacing...conventional transistors. Figure 3. Calculated output characteristics of a pentacene OFET with image charge induced contact barrier...Cross section view of a part of an OFET in the vicinity of a source or drain contact. local ordering due to surface energy effects. The development of

Minimizing systematic errors from atmospheric multiple scattering and satellite viewing geometry in coastal zone color scanner level IIA imagery

NASA Technical Reports Server (NTRS)

Martin, D. L.; Perry, M. J.

1994-01-01

Water-leaving radiances and phytoplankton pigment concentrations are calculated from coastal zone color scanner (CZCS) radiance measurements by removing atmospheric Rayleigh and aerosol radiances from the total radiance signal measured at the satellite. The single greatest source of error in CZCS atmospheric correction algorithms in the assumption that these Rayleigh and aerosol radiances are separable. Multiple-scattering interactions between Rayleigh and aerosol components cause systematic errors in calculated aerosol radiances, and the magnitude of these errors is dependent on aerosol type and optical depth and on satellite viewing geometry. A technique was developed which extends the results of previous radiative transfer modeling by Gordon and Castano to predict the magnitude of these systematic errors for simulated CZCS orbital passes in which the ocean is viewed through a modeled, physically realistic atmosphere. The simulated image mathematically duplicates the exact satellite, Sun, and pixel locations of an actual CZCS image. Errors in the aerosol radiance at 443 nm are calculated for a range of aerosol optical depths. When pixels in the simulated image exceed an error threshhold, the corresponding pixels in the actual CZCS image are flagged and excluded from further analysis or from use in image compositing or compilation of pigment concentration databases. Studies based on time series analyses or compositing of CZCS imagery which do not address Rayleigh-aerosol multiple scattering should be interpreted cautiously, since the fundamental assumption used in their atmospheric correction algorithm is flawed.

Genetics Home Reference: factor VII deficiency

MedlinePlus

... Facebook Twitter Home Health Conditions Factor VII deficiency Factor VII deficiency Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Factor VII deficiency is a rare bleeding disorder that varies ...

Television watching, diet quality, and physical activity and diabetes among three ethnicities in the United States.

PubMed

Huffman, Fatma G; Vaccaro, Joan A; Exebio, Joel C; Zarini, Gustavo G; Katz, Timothy; Dixon, Zisca

2012-01-01

Diabetes is a world-wide epidemic associated with multiple environmental factors. Prolonged television viewing (TV) time has been related to increased risk of obesity and type 2 diabetes in several studies. TV viewing has been positively associated with cardiovascular disease risk factors, lower energy expenditure, over-eating high-calorie and high-fat foods. The objective of this study was to assess the associations of hours of TV viewing with dietary quality, obesity and physical activity for three ethnic minorities with and without type 2 diabetes. Diet quality and physical activity were inversely related to prolonged TV viewing. African Americans and participants with type 2 diabetes were more likely to watch more than 4 hours of TV per day as compared to their counterparts. Diet quality was inversely associated with physical activity level. Future studies are needed to establish the risk factors of prolonged TV watching in adult populations for the development of diabetes or diabetes-related complications. Although strategies to reduce TV watching have been proven effective among children, few trials have been conducted in adults. Intervention trials aimed at reducing TV viewing targeting people with type 2 diabetes may be beneficial to improve dietary quality and physical activity, which may reduce diabetes complications.

Nonexercise activity thermogenesis (NEAT): environment and biology.

PubMed

Levine, James A

2004-05-01

Nonexercise activity thermogenesis (NEAT) is the energy expended for everything that is not sleeping, eating, or sports-like exercise. It includes the energy expended walking to work, typing, performing yard work, undertaking agricultural tasks, and fidgeting. NEAT can be measured by one of two approaches. The first is to measure or estimate total NEAT. Here, total daily energy expenditure is measured, and from it "basal metabolic rate-plus-thermic effect of food" is subtracted. The second is the factoral approach, whereby the components of NEAT are quantified, and total NEAT is calculated by summing these components. The amount of NEAT that humans perform represents the product of the amount and types of physical activities and the thermogenic cost of each activity. The factors that impact a human's NEAT are readily divisible into environmental factors, such as occupation or dwelling within a "concrete jungle," and biological factors such as weight, gender, and body composition. The combined impact of these factors explains the substantial variance in human NEAT. The variability in NEAT might be viewed as random, but human and animal data contradict this. It appears that changes in NEAT subtly accompany experimentally induced changes in energy balance and are important in the physiology of weight change. Inadequate modulation of NEAT plus a sedentary lifestyle may thus be important in obesity. It then becomes intriguing to dissect mechanistic studies that delineate how NEAT is regulated into neural, peripheral, and humoral factors. A scheme is described in this review in which NEAT corresponds to a carefully regulated "tank" of physical activity that is crucial for weight control.

Research in Application of Geodetic GPS Receivers in Time Synchronization

NASA Astrophysics Data System (ADS)

Zhang, Q.; Zhang, P.; Sun, Z.; Wang, F.; Wang, X.

2018-04-01

In recent years, with the development of satellite orbit and clock parameters accurately determining technology and the popularity of geodetic GPS receivers, Common-View (CV) which proposed in 1980 by Allan has gained widespread application and achieved higher accuracy time synchronization results. GPS Common View (GPS CV) is the technology that based on multi-channel geodetic GPS receivers located in different place and under the same common-view schedule to receiving same GPS satellite signal at the same time, and then calculating the time difference between respective local receiver time and GPST by weighted theory, we will obtain the difference between above local time of receivers that installed in different station with external atomic clock. Multi-channel geodetic GPS receivers have significant advantages such as higher stability, higher accuracy and more common-view satellites in long baseline time synchronization application over the single-channel geodetic GPS receivers. At present, receiver hardware delay and surrounding environment influence are main error factors that affect the accuracy of GPS common-view result. But most error factors will be suppressed by observation data smoothing and using of observation data from different satellites in multi-channel geodetic GPS receiver. After the SA (Selective Availability) cancellation, using a combination of precise satellite ephemeris, ionospheric-free dual-frequency P-code observations and accurately measuring of receiver hardware delay, we can achieve time synchronization result on the order of nanoseconds (ns). In this paper, 6 days observation data of two IGS core stations with external atomic clock (PTB, USNO distance of two stations about 6000 km) were used to verify the GPS common-view theory. Through GPS observation data analysis, there are at least 2-4 common-view satellites and 5 satellites in a few tracking periods between two stations when the elevation angle is 15°, even there will be at least 2 common-view satellites for each tracking period when the elevation angle is 30°. Data processing used precise GPS satellite ephemeris, double-frequency P-code combination observations without ionosphere effects and the correction of the Black troposphere Delay Model. the weighted average of all common-viewed GPS satellites in the same tracking period is taken by weighting the root-mean-square error of each satellite, finally a time comparison data between two stations is obtained, and then the time synchronization result between the two stations (PTB and USNO) is obtained. It can be seen from the analysis of time synchronization result that the root mean square error of REFSV (the difference between the local frequency standard at the mid-point of the actual tracking length and the tracked satellite time in unit of 0.1 ns) shows a linear change within one day, However the jump occurs when jumping over the day which is mainly caused by satellites position being changed due to the interpolation of two-day precise satellite ephemeris across the day. the overall trend of time synchronization result is declining and tends to be stable within a week-long time. We compared the time synchronization results (without considering the hardware delay correction) with those published by the International Bureau of Weights and Measures (BIPM), and the comparing result from a week earlier shows that the trend is same but there is a systematic bias which was mainly caused by hardware delays of geodetic GPS receiver. Regardless of the hardware delay, the comparing result is about between 102 ns and 106 ns. the vast majority of the difference within 2 ns but the difference of individual moment does not exceed 4ns when taking into account the systemic bias which mainly caused by hardware delay. Therefore, it is feasible to use the geodetic GPS receiver to achieve the time synchronization result in nanosecond order between two stations which separated by thousands kilometers, and multi-channel geodetic GPS receivers have obvious advantages over single-channel geodetic GPS receivers in the number of common-viewing satellites. In order to obtain higher precision (e.g sub-nanosecond order) time synchronization results, we shall take account into carrier phase observations, hardware delay ,and more error-influencing factors should be considered such as troposphere delay correction, multipath effects, and hardware delays changes due to temperature changes.

Employers' views on the promotion of workplace health and wellbeing: a qualitative study.

PubMed

Pescud, Melanie; Teal, Renee; Shilton, Trevor; Slevin, Terry; Ledger, Melissa; Waterworth, Pippa; Rosenberg, Michael

2015-07-11

The evidence surrounding the value of workplace health promotion in positively influencing employees' health and wellbeing via changes to their health behaviours is growing. The aim of the study was to explore employers' views on the promotion of workplace health and wellbeing and the factors affecting these views. Using a qualitative phenomenological approach, 10 focus groups were conducted with employers selected from a range of industries and geographical locations within Western Australia. The total sample size was 79. Three factors were identified: employers' conceptualization of workplace health and wellbeing; employers' descriptions of (un)healthy workers and perceptions surrounding the importance of healthy workers; and employers' beliefs around the role the workplace should play in influencing health. Progress may be viable in promoting health and wellbeing if a multifaceted approach is employed taking into account the complex factors influencing employers' views. This could include an education campaign providing information about what constitutes health and wellbeing beyond the scope of occupational health and safety paradigms along with information on the benefits of workplace health and wellbeing aligned with perceptions relating to healthy and unhealthy workers.

Views of elementary school teachers towards students with cochlear implants inclusion in the process of education.

PubMed

Dulcić, Adinda; Bakota, Koraljka

2009-06-01

The paper reveals views of teachers in some regular elementary schools in the Republic of Croatia where students with cochlear implants, who are also rehabilitants of SUVAG Polyclinic, are educated. Survey aimed to research the views of teachers towards education. Survey included 98 teachers. Likert type scale was applied in order to identify the views of teachers towards students with hearing impairment. The survey was carried out in May 2007. Data were processed by SPSS for Windows program, version 13. Methods of descriptive statistics were applied to process frequencies of responds on variables for total sample and 3 statistically significant factors emerged by factor analysis. Results of this survey reveal that teachers have positive views towards inclusive education as a process which offers students with cochlear implants the possibility to socialize and achieve intellectual and emotional development. The survey suggests that the way of inclusion enforcement mostly satisfies the criteria specified for successful inclusion.

Saturated internal instabilities in advanced-tokamak plasmas

NASA Astrophysics Data System (ADS)

Hua, M.-D.; Chapman, I. T.; Pinches, S. D.; Hastie, R. J.; MAST Team

2010-06-01

"Advanced tokamak" (AT) scenarios were developed with the aim of reaching steady-state operation in future potential tokamak fusion power plants. AT scenarios exhibit non-monotonic to flat safety factor profiles (q, a measure of the magnetic field line pitch), with the minimum q (qmin) slightly above an integer value (qs). However, it has been predicted that these q profiles are unstable to ideal magnetohydrodynamic instabilities as qmin approaches qs. These ideal instabilities, observed and diagnosed as such for the first time in MAST plasmas with AT-like q profiles, have far-reaching consequences like confinement degradation, flattening of the toroidal core rotation or enhanced fast ion losses. These observations motivate the stability analysis of advanced-tokamak plasmas, with a view to provide guidance for stability thresholds in AT scenarios. Additionally, the measured rotation damping is compared to the self-consistently calculated predictions from neoclassical toroidal viscosity theory.

3D silicone rubber interfaces for individually tailored implants.

PubMed

Stieghorst, Jan; Bondarenkova, Alexandra; Burblies, Niklas; Behrens, Peter; Doll, Theodor

2015-01-01

For the fabrication of customized silicone rubber based implants, e.g. cochlear implants or electrocortical grid arrays, it is required to develop high speed curing systems, which vulcanize the silicone rubber before it runs due to a heating related viscosity drop. Therefore, we present an infrared radiation based cross-linking approach for the 3D-printing of silicone rubber bulk and carbon nanotube based silicone rubber electrode materials. Composite materials were cured in less than 120 s and material interfaces were evaluated with scanning electron microscopy. Furthermore, curing related changes in the mechanical and cell-biological behaviour were investigated with tensile and WST-1 cell biocompatibility tests. The infrared absorption properties of the silicone rubber materials were analysed with fourier transform infrared spectroscopy in transmission and attenuated total reflection mode. The heat flux was calculated by using the FTIR data, emissivity data from the infrared source manufacturer and the geometrical view factor of the system.

Flushing of a coastal lagoon in the Red Sea

NASA Astrophysics Data System (ADS)

Sultan, S. A. R.; Ahmad, F.

1990-09-01

Shu'aiba Lagoon (Lat. 20°45'N; Long. 39°28'E) is located on the eastern coast of the Red Sea. It is relatively shallow with an area of approximately 11·7 km 2. The inlet to the lagoon is narrow with a cross-sectional area of about 245 m 2. This lagoon is a future site to develop mariculture. With this objective in view the flushing time scale of the lagoon was calculated, as flushing is an important abiotic factor in lagoon ecology. The average flushing time for the months February to June and September to November is about 20 days. Oceanic inputs play an important part in the process of fertilization of the lagoons. The marine environment in arid zone lagoons is under natural stress due to high temperatures and salinities. However, the flushing time scale of 20 days may not exert intolerable stress on the ecology of the Shu'aiba Lagoon.

Application of Improved 5th-Cubature Kalman Filter in Initial Strapdown Inertial Navigation System Alignment for Large Misalignment Angles.

PubMed

Wang, Wei; Chen, Xiyuan

2018-02-23

In view of the fact the accuracy of the third-degree Cubature Kalman Filter (CKF) used for initial alignment under large misalignment angle conditions is insufficient, an improved fifth-degree CKF algorithm is proposed in this paper. In order to make full use of the innovation on filtering, the innovation covariance matrix is calculated recursively by an innovative sequence with an exponent fading factor. Then a new adaptive error covariance matrix scaling algorithm is proposed. The Singular Value Decomposition (SVD) method is used for improving the numerical stability of the fifth-degree CKF in this paper. In order to avoid the overshoot caused by excessive scaling of error covariance matrix during the convergence stage, the scaling scheme is terminated when the gradient of azimuth reaches the maximum. The experimental results show that the improved algorithm has better alignment accuracy with large misalignment angles than the traditional algorithm.

A method of self-pursued boundary value on a body and the Magnus effect calculated with this method

NASA Astrophysics Data System (ADS)

Yoshino, Fumio; Hayashi, Tatsuo; Waka, Ryoji

1991-03-01

A computational method, designated 'SPB', is proposed for the automatic determination of the stream function Phi on an arbitrarily profiled body without recourse to empirical factors. The method is applied to the case of a rotating, circular cross-section cylinder in a uniform shear flow, and the results obtained are compared with those of both the method in which the value of Phi is fixed on a body and the conventional empirical method; it is in view of this established that the SPB method is very efficient and applicable to both steady and unsteady flows. The SPB method, in addition to yielding the aerodynamic forces acting on a cylinder, shows that the Magnus effect lift force decreases as the velocity gradient of the shear flow increases while the cylinder's rotational speed is kept constant.

Oscillating fluid lens in coherent retinal projection displays for extending depth of focus

NASA Astrophysics Data System (ADS)

von Waldkirch, extending depth of focus M.; Lukowicz, P.; Troster, G.

2005-09-01

See-through head-mounted displays, which allow to overlay virtual information over the user's real view, suffer normally from a limited depth of focus (DOF). To overcome this problem we discuss in this paper the use of a fast oscillating, variable-focus lens in a retinal projection display. The evaluation is based on a schematic eye model and on the partial coherence simulation tool SPLAT which allows us to calculate the projected retinal images of a text target. Objective image quality criteria demonstrate that the use of an oscillating lens is promising provided that partially coherent illumination light is used. In this case, psychometric measurements reveal that the depth of focus for reading text can be extended by a factor of up to 2.2. For fully coherent and incoherent illumination, however, the retinal images suffer from structural and contrast degradation effects, respectively.

Optimization and performance improvement of an electromagnetic-type energy harvester with consideration of human walking vibration

NASA Astrophysics Data System (ADS)

Seo, Jongho; Kim, Jin-Su; Jeong, Un-Chang; Kim, Yong-Dae; Kim, Young-Cheol; Lee, Hanmin; Oh, Jae-Eung

2016-02-01

In this study, we derived an equation of motion for an electromechanical system in view of the components and working mechanism of an electromagnetic-type energy harvester (ETEH). An electromechanical transduction factor (ETF) was calculated using a finite-element analysis (FEA) based on Maxwell's theory. The experimental ETF of the ETEH measured by means of sine wave excitation was compared with and FEA data. Design parameters for the stationary part of the energy harvester were optimized in terms of the power performance by using a response surface method (RSM). With optimized design parameters, the ETEH showed an improvement in performance. We experimented with the optimized ETEH (OETEH) with respect to changes in the external excitation frequency and the load resistance by taking human body vibration in to account. The OETEH achieved a performance improvement of about 30% compared to the initial model.

Greenhouse Gas Inventory of a Typical High-End Industrial Park in China

PubMed Central

Chen, Bin; He, Guoxuan; Qi, Jing; Zhou, Shiyi; Jiang, Meiming

2013-01-01

Global climate change caused by greenhouse gas (GHG) emissions, which severely limits the development of human society and threatens the survival of humanity, has drawn the international community's long-term attention. Gathering the most important production factors in the region, an industrial park usually represents the development level of specific industries in the region. Therefore, the industrial park should be regarded as the base unit for developing a low-carbon economy and reducing GHG emissions. Focusing on a typical high-end industrial park in Beijing, we analyze the carbon sources within the system boundary and probe into the emission structure in view of life-cycle analysis. A GHG inventory is thereby set up to calculate all GHG emissions from the concerned park. Based on the results, suggestions are presented to guide the low-carbon development of the high-end industrial park. PMID:23431258

Greenhouse gas inventory of a typical high-end industrial park in China.

PubMed

Chen, Bin; He, Guoxuan; Qi, Jing; Su, Meirong; Zhou, Shiyi; Jiang, Meiming

2013-01-01

Global climate change caused by greenhouse gas (GHG) emissions, which severely limits the development of human society and threatens the survival of humanity, has drawn the international community's long-term attention. Gathering the most important production factors in the region, an industrial park usually represents the development level of specific industries in the region. Therefore, the industrial park should be regarded as the base unit for developing a low-carbon economy and reducing GHG emissions. Focusing on a typical high-end industrial park in Beijing, we analyze the carbon sources within the system boundary and probe into the emission structure in view of life-cycle analysis. A GHG inventory is thereby set up to calculate all GHG emissions from the concerned park. Based on the results, suggestions are presented to guide the low-carbon development of the high-end industrial park.

What Helps Children in a Pupil Referral Unit (PRU)? An Exploration into the Potential Protective Factors of a PRU as Identified by Children and Staff

ERIC Educational Resources Information Center

Hart, Natalie

2013-01-01

Previous studies have focused on the views of excluded children or those finding themselves in Pupil Referral Units (PRUs). Few, however, have focused on exploring views from a resilience perspective. Studies linked to resilience have tended to focus on exploring factors through quantitative rather than qualitative measures. This piece of research…

Viewing child pornography: prevalence and correlates in a representative community sample of young Swedish men.

PubMed

Seto, Michael C; Hermann, Chantal A; Kjellgren, Cecilia; Priebe, Gisela; Svedin, Carl Göran; Långström, Niklas

2015-01-01

Most research on child pornography use has been based on selected clinical or criminal justice samples; risk factors for child pornography use in the general population remain largely unexplored. In this study, we examined prevalence, risk factors, and correlates of viewing depictions of adult-child sex in a population-representative sample of 1,978 young Swedish men (17-20 years, Mdn = 18 years, overall response rate, 77 %). In an anonymous, school-based survey, participants self-reported sexual coercion experiences, attitudes and beliefs about sex, perceived peer attitudes, and sexual interests and behaviors; including pornography use, sexual interest in children, and sexually coercive behavior. A total of 84 (4.2 %) young men reported they had ever viewed child pornography. Most theory-based variables were moderately and significantly associated with child pornography viewing and were consistent with models of sexual offending implicating both antisociality and sexual deviance. In multivariate logistic regression analysis, 7 of 15 tested factors independently predicted child pornography viewing and explained 42 % of the variance: ever had sex with a male, likely to have sex with a child aged 12-14, likely to have sex with a child 12 or less, perception of children as seductive, having friends who have watched child pornography, frequent pornography use, and ever viewed violent pornography. From these, a 6-item Child Pornography Correlates Scale was constructed and then cross-validated in a similar but independent Norwegian sample.

Radiation doses in examination of lower third molars with computed tomography and conventional radiography.

PubMed

Ohman, A; Kull, L; Andersson, J; Flygare, L

2008-12-01

To measure organ doses and calculate effective doses for pre-operative radiographic examination of lower third molars with CT and conventional radiography (CR). Measurements of organ doses were made on an anthropomorphic head phantom with lithium fluoride thermoluminescent dosemeters. The dosemeters were placed in regions corresponding to parotid and submandibular glands, mandibular bone, thyroid gland, skin, eye lenses and brain. The organ doses were used for the calculation of effective doses according to proposed International Commission on Radiological Protection 2005 guidelines. For the CT examination, a Siemens Somatom Plus 4 Volume Zoom was used and exposure factors were set to 120 kV and 100 mAs. For conventional radiographs, a Scanora unit was used and panoramic, posteroanterior, stereographic (scanogram) and conventional spiral tomographic views were exposed. The effective doses were 0.25 mSv, 0.060 mSv and 0.093 mSv for CT, CR without conventional tomography and CR with conventional spiral tomography, respectively. The effective dose is low when CT examination with exposure factors optimized for the examination of bone structures is performed. However, the dose is still about four times as high as for CR without tomography. CT should therefore not be a standard method for the examination of lower third molars. In cases where there is a close relationship between the tooth and the inferior alveolar nerve the advantages of true sectional imaging, such as CT, outweighs the higher effective dose and is recommended. Further reduction in the dose is feasible with further optimization of examination protocols and the development of newer techniques.

Influence of patient position and other inherent factors on image quality in two different cone beam computed tomography (CBCT) devices.

PubMed

Lindfors, Ninita; Lund, Henrik; Johansson, Hans; Ekestubbe, Annika

2017-01-01

The aim of this in vitro study was to evaluate how a deviation from the horizontal plane, affects the image quality in two different CBCT-devices. A phantom head SK150 (RANDO, The Phantom Laboratory, Salem, NY, USA) was examined in two CBCT-units: Accuitomo 80 and Veraviewepocs 3D R100 (J. Morita Mfg. Corp. Kyoto, Japan). The phantom head was placed with the hard palate parallel to the horizontal plane and tilted 20 ° backwards. Exposures were performed with different field of views (FOVs), voxel sizes, slice thicknesses and exposure settings. Effective dose was calculated using PCXMC 2.0 (STUK, Helsinki, Finland). Image quality was assessed using contrast-to-noise-ratio (CNR). Region of interest (ROI) was set at three different levels of the mandibular bone and soft tissue, uni- and bilaterally in small and large FOVs, respectively. CNR values were calculated by CT-value and standard deviation for each ROI. Factor analysis was used to analyze the material. Tilting the phantom head backwards rendered significantly higher mean CNR values regardless of FOV. The effective dose was lower in small than in large FOVs and varied to a larger extent between CBCT-devices in large FOVs. Head position can affect the image quality. Tilting the head backward improved image quality in the mandibular region. However, if influenced by other variables e.g. motion artifacts in a clinical situation, remains to be further investigated. Image quality assessed using CNR values to investigate the influence of different patient positions and FOVs.

WE-DE-207B-12: Scatter Correction for Dedicated Cone Beam Breast CT Based On a Forward Projection Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shi, L; Zhu, L; Vedantham, S

2016-06-15

Purpose: The image quality of dedicated cone-beam breast CT (CBBCT) is fundamentally limited by substantial x-ray scatter contamination, resulting in cupping artifacts and contrast-loss in reconstructed images. Such effects obscure the visibility of soft-tissue lesions and calcifications, which hinders breast cancer detection and diagnosis. In this work, we propose to suppress x-ray scatter in CBBCT images using a deterministic forward projection model. Method: We first use the 1st-pass FDK-reconstructed CBBCT images to segment fibroglandular and adipose tissue. Attenuation coefficients are assigned to the two tissues based on the x-ray spectrum used for imaging acquisition, and is forward projected to simulatemore » scatter-free primary projections. We estimate the scatter by subtracting the simulated primary projection from the measured projection, and then the resultant scatter map is further refined by a Fourier-domain fitting algorithm after discarding untrusted scatter information. The final scatter estimate is subtracted from the measured projection for effective scatter correction. In our implementation, the proposed scatter correction takes 0.5 seconds for each projection. The method was evaluated using the overall image spatial non-uniformity (SNU) metric and the contrast-to-noise ratio (CNR) with 5 clinical datasets of BI-RADS 4/5 subjects. Results: For the 5 clinical datasets, our method reduced the SNU from 7.79% to 1.68% in coronal view and from 6.71% to 3.20% in sagittal view. The average CNR is improved by a factor of 1.38 in coronal view and 1.26 in sagittal view. Conclusion: The proposed scatter correction approach requires no additional scans or prior images and uses a deterministic model for efficient calculation. Evaluation with clinical datasets demonstrates the feasibility and stability of the method. These features are attractive for clinical CBBCT and make our method distinct from other approaches. Supported partly by NIH R21EB019597, R21CA134128 and R01CA195512.The content is solely the responsibility of the authors and does not necessarily represent the official views of the National Institutes of Health.« less

WE-EF-207-07: Dual Energy CT with One Full Scan and a Second Sparse-View Scan Using Structure Preserving Iterative Reconstruction (SPIR)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, T; Zhu, L

Purpose: Conventional dual energy CT (DECT) reconstructs CT and basis material images from two full-size projection datasets with different energy spectra. To relax the data requirement, we propose an iterative DECT reconstruction algorithm using one full scan and a second sparse-view scan by utilizing redundant structural information of the same object acquired at two different energies. Methods: We first reconstruct a full-scan CT image using filtered-backprojection (FBP) algorithm. The material similarities of each pixel with other pixels are calculated by an exponential function about pixel value differences. We assume that the material similarities of pixels remains in the second CTmore » scan, although pixel values may vary. An iterative method is designed to reconstruct the second CT image from reduced projections. Under the data fidelity constraint, the algorithm minimizes the L2 norm of the difference between pixel value and its estimation, which is the average of other pixel values weighted by their similarities. The proposed algorithm, referred to as structure preserving iterative reconstruction (SPIR), is evaluated on physical phantoms. Results: On the Catphan600 phantom, SPIR-based DECT method with a second 10-view scan reduces the noise standard deviation of a full-scan FBP CT reconstruction by a factor of 4 with well-maintained spatial resolution, while iterative reconstruction using total-variation regularization (TVR) degrades the spatial resolution at the same noise level. The proposed method achieves less than 1% measurement difference on electron density map compared with the conventional two-full-scan DECT. On an anthropomorphic pediatric phantom, our method successfully reconstructs the complicated vertebra structures and decomposes bone and soft tissue. Conclusion: We develop an effective method to reduce the number of views and therefore data acquisition in DECT. We show that SPIR-based DECT using one full scan and a second 10-view scan can provide high-quality DECT images and accurate electron density maps as conventional two-full-scan DECT.« less

TU-CD-207-11: Patient-Driven Automatic Exposure Control for Dedicated Breast CT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hernandez, A; Gazi, P; Department of Radiology, UC Davis Medical Center, Sacramento, CA

Purpose: To implement automatic exposure control (AEC) in dedicated breast CT (bCT) on a patient-specific basis using only the pre-scan scout views. Methods: Using a large cohort (N=153) of bCT data sets, the breast effective diameter (D) and width in orthogonal planes (Wa,Wb) were calculated from the reconstructed bCT image and pre-scan scout views, respectively. D, Wa, and Wb were measured at the breast center-of-mass (COM), making use of the known geometry of our bCT system. These data were then fit to a second-order polynomial “D=F(Wa,Wb)” in a least squares sense in order to provide a functional form for determiningmore » the breast diameter. The coefficient of determination (R{sup 2}) and mean percent error between the measured breast diameter and fit breast diameter were used to evaluate the overall robustness of the polynomial fit. Lastly, previously-reported bCT technique factors derived from Monte Carlo simulations were used to determine the tube current required for each breast diameter in order to match two-view mammographic dose levels. Results: F(Wa,Wb) provided fitted breast diameters in agreement with the measured breast diameters resulting in R{sup 2} values ranging from 0.908 to 0.929 and mean percent errors ranging from 3.2% to 3.7%. For all 153 bCT data sets used in this study, the fitted breast diameters ranged from 7.9 cm to 15.7 cm corresponding to tube current values ranging from 0.6 mA to 4.9 mA in order to deliver the same dose as two-view mammography in a 50% glandular breast with a 80 kV x-ray beam and 16.6 second scan time. Conclusion: The present work provides a robust framework for AEC in dedicated bCT using only the width measurements derived from the two orthogonal pre-scan scout views. Future work will investigate how these automatically chosen exposure levels affect the quality of the reconstructed image.« less

Calculation Method of Lateral Strengths and Ductility Factors of Constructions with Shear Walls of Different Ductility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yamaguchi, Nobuyoshi; Nakao, Masato; Murakami, Masahide

2008-07-08

For seismic design, ductility-related force modification factors are named R factor in Uniform Building Code of U.S, q factor in Euro Code 8 and Ds (inverse of R) factor in Japanese Building Code. These ductility-related force modification factors for each type of shear elements are appeared in those codes. Some constructions use various types of shear walls that have different ductility, especially for their retrofit or re-strengthening. In these cases, engineers puzzle the decision of force modification factors of the constructions. Solving this problem, new method to calculate lateral strengths of stories for simple shear wall systems is proposed andmore » named 'Stiffness--Potential Energy Addition Method' in this paper. This method uses two design lateral strengths for each type of shear walls in damage limit state and safety limit state. Two lateral strengths of stories in both limit states are calculated from these two design lateral strengths for each type of shear walls in both limit states. Calculated strengths have the same quality as values obtained by strength addition method using many steps of load-deformation data of shear walls. The new method to calculate ductility factors is also proposed in this paper. This method is based on the new method to calculate lateral strengths of stories. This method can solve the problem to obtain ductility factors of stories with shear walls of different ductility.« less

Right and left ventricular volumes in vitro by a new nongeometric method

NASA Technical Reports Server (NTRS)

Buckey, J. C.; Beattie, J. M.; Nixon, J. V.; Gaffney, F. A.; Blomqvist, C. G.

1987-01-01

We present an evaluation of a new nongeometric technique for calculating right and left ventricular volumes. This method calculates ventricular chamber volumes from multiple cross-sectional echocardiographic views taken from a single point as the echo beam is tilted progressively through the ventricle. Right and left ventricular volumes are calculated from both the approximate short axis and approximate apical position on 20 in vitro human hearts and compared with the actual chamber volumes. The results for both ventricles from both positions are excellent. Correlation coefficients are > 0.95 for all positions; the standard errors are in the range of 5 to 7 mL and the slopes and intercepts for the regression lines are not significantly different from 1 and 0, respectively (except for the left ventricular short-axis intercept). For all positions, approximately 6 to 8 views are needed for peak accuracy (7.5 degrees to 10 degrees separation). This approach offers several advantages. No geometric assumptions about ventricular shape are made. All images are acquired from a single point (or window), and the digitized points can be used to make a three-dimensional reconstruction of the ventricle. Also, during the calculations a volume distribution curve for the ventricle is produced. The shape of this curve can be characteristic for certain situations (ie, right ventricle, short axis) and can be used to make new simple equations for calculating volume. We conclude that this is an accurate nongeometric method for determining both right and left ventricular volumes in vitro.

An Analysis of Image Segmentation Time in Beam’s-Eye-View Treatment Planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Chun; Spelbring, D.R.; Chen, George T.Y.

In this work we tabulate and histogram the image segmentation time for beam’s eye view (BEV) treatment planning in our center. The average time needed to generate contours on CT images delineating normal structures and treatment target volumes is calculated using a data base containing over 500 patients’ BEV plans. The average number of contours and total image segmentation time needed for BEV plans in three common treatment sites, namely, head/neck, lung/chest, and prostate, were estimated.

Engineering good: how engineering metaphors help us to understand the moral life and change society.

PubMed

Coeckelbergh, Mark

2010-06-01

Engineering can learn from ethics, but ethics can also learn from engineering. In this paper, I discuss what engineering metaphors can teach us about practical philosophy. Using metaphors such as calculation, performance, and open source, I articulate two opposing views of morality and politics: one that relies on images related to engineering as science and one that draws on images of engineering practice. I argue that the latter view and its metaphors provide a more adequate way to understand and guide the moral life. Responding to two problems of alienation and taking into account developments such as Fab Lab I then further explore the implications of this view for engineering and society.

Suberythemal Sun Exposures at Swedish Schools Depend on Sky Views of the Outdoor Environments - Possible Implications for Pupils' Health.

PubMed

Pagels, Peter; Wester, Ulf; Söderström, Margareta; Lindelöf, Bernt; Boldemann, Cecilia

2016-01-01

More scheduled outdoor stay is increasingly advocated for school children. This study measured 2(nd) , 5(th) and 8(th) graders' erythemal UV-exposure in September, March and May at four Swedish schools. We related those exposures, as fractions of total available ambient radiation, to the schools outdoor environments differing in amount of shade, vegetation, and peripheral city-scape quantified as percentage of free sky view calculated from fish-eye photographs. Exposures correlated with the sky views (with exceptions in May) and were suberythemal. The exposures were also below the threshold limit of the International Commission on Non-Ionizing Radiation Protection (ICNIRP) for hazard evaluation of UVR but were potentially enough for adequate vitamin D formation according to a cited model calculation - as illustrated in the results and discussed. The school environments, typical in southern and middle Sweden, offer enough shade to protect children from overexposure during seasons with potentially harmful solar UV radiation. Pupils' outdoor stay may be extended during September and March. In May extended outdoor stay of the youngest pupils requires a more UVR-protective environment. © 2015 The American Society of Photobiology.

[Design of longitudinal auto-tracking of the detector on X-ray in digital radiography].

PubMed

Yu, Xiaomin; Jiang, Tianhao; Liu, Zhihong; Zhao, Xu

2018-04-01

One algorithm is designed to implement longitudinal auto-tracking of the the detector on X-ray in the digital radiography system (DR) with manual collimator. In this study, when the longitudinal length of field of view (LFOV) on the detector is coincided with the longitudinal effective imaging size of the detector, the collimator half open angle ( Ψ ), the maximum centric distance ( e max ) between the center of X-ray field of view and the projection center of the focal spot, and the detector moving distance for auto-traking can be calculated automatically. When LFOV is smaller than the longitudinal effective imaging size of the detector by reducing Ψ , the e max can still be used to calculate the detector moving distance. Using this auto-tracking algorithm in DR with manual collimator, the tested results show that the X-ray projection is totally covered by the effective imaging area of the detector, although the center of the field of view is not aligned with the center of the effective imaging area of the detector. As a simple and low-cost design, the algorithm can be used for longitudinal auto-tracking of the detector on X-ray in the manual collimator DR.

An initial examination of Singaporean seventh and eighth graders' views of nature of science

NASA Astrophysics Data System (ADS)

Lin, Tzung-Jin; Goh, Amos Yoong Shin; Chai, Ching Sing; Tsai, Chin-Chung

2013-07-01

Background and purpose . Research in nature of science (NOS) among Asia-Pacific countries such as Singapore is arguably scarce. This study aimed to survey Singaporean secondary school students' views of NOS with a newly developed instrument named Students' Views of Nature of Science (SVNOS), which included various key aspects of NOS that are generally agreed upon by the science education community. Moreover, the relations between some demographic factors, including gender and grade, and students' views of NOS were explored. Sample, design and method In total, 359 Singaporean seventh and eighth graders were invited to participate in this survey. The reliability, validity and structure of the SVNOS instrument were ensured by confirmatory factor analysis. A two-way multivariate analysis of variance was then conducted to determine the interaction effects between the gender variable and the grade-level variable. Results and conclusion The results indicated that the SVNOS instrument is reliable and valid to assess students' views of NOS regarding seven distinct NOS dimensions. The male students were more prone to have constructivist-oriented views of NOS in the most of the SVNOS dimensions, while the female students conveyed more non-objective views of NOS. In addition, the eighth graders revealed more empiricist-oriented views of NOS than the seventh graders in several SVNOS dimensions. This result seems to contradict the results of previous studies that students' views of NOS may reflect a developmental trend with their increasing educational experiences.

Tektite ablation - Some confirming calculations.

NASA Technical Reports Server (NTRS)

O'Keefe, J. A., III; Silver, A. D.; Cameron, W. S.; Adams , E. W.; Warmbrod, J. D.

1973-01-01

The calculation of tektite ablation has been redone, taking into account transient effects, internal radiation, melting and nonequilibrium vaporization of the glass, and the drag effect of the flanges. It is found that the results confirm the earlier calculations of Chapman and his group and of Adams and his co-workers. The general trend of the results is not sensitive to reasonable changes of the physical parameters. The ablation is predominantly by melting rather than by vaporization at all velocities up to 11 km/sec; this is surprising in view of the lack of detectable melt flow in most tektites. Chemical effects have not been considered.

Inversion of chalcogen defect levels in silicon - An MNDO study. [modified neglect of diatomic overlap

NASA Technical Reports Server (NTRS)

Singh, R. K.; Sahu, S. N.; Singh, V. A.; Corbett, J. W.

1985-01-01

MNDO (modified neglect of diatomic overlap) calculations have been carried out for substitutional oxygen and sulfur impurities in silicon. The calculations of the gap levels reveal a reversal of trend with atomic ionization energies in agreement with self-consistent Green function results, and analysis of the MNDO charge distribution supports the view that the electronegativity difference between oxygen and sulfur gives rise to this shallower energy level.

A general formalism for phase space calculations

NASA Technical Reports Server (NTRS)

Norbury, John W.; Deutchman, Philip A.; Townsend, Lawrence W.; Cucinotta, Francis A.

1988-01-01

General formulas for calculating the interactions of galactic cosmic rays with target nuclei are presented. Methods for calculating the appropriate normalization volume elements and phase space factors are presented. Particular emphasis is placed on obtaining correct phase space factors for 2-, and 3-body final states. Calculations for both Lorentz-invariant and noninvariant phase space are presented.

Parenting practices regarding TV viewing in low-income Mexican American mothers of preschoolers: Development of the Parenting Practices Regarding TV Viewing (PPRTV) scale

PubMed Central

Thompson, Darcy A.; Johnson, Susan L.; Vandewater, Elizabeth A.; Schmiege, Sarah J.; Boles, Richard E.; Lev, Jerusha; Tschann, Jeanne M.

2016-01-01

Objective To develop and test a comprehensive, culturally-based measure of parenting practices regarding TV viewing in low-income Mexican American mothers of preschoolers. Methods Low-income Mexican American female primary caregivers of preschoolers were recruited in urban safety-net pediatric clinics during the 2013-14 academic year. Items on parenting practices regarding TV viewing were developed from a prior scale, review of the literature, and results from semi-structured interviews. Items were administered by phone and analyses included evaluation of the factor structure and psychometric properties of a 40-item measure of Parenting Practices Regarding TV Viewing (PPRTV). Results Using exploratory factor analysis, a 7-factor model emerged as the best fit for the data representing the following domains of parenting practices: Time Restriction, Behavioral Control, Instructive Practices, Coviewing, Planful Restriction, Reactive Content Restriction, and Commercial Endorsement. Internal reliabilities were acceptable (Cronbach's alpha> 0.75). Correlations among the resulting subscales were small to moderate (rs = 0.01-0.43). Subscales were correlated with child TV viewing amounts: Time Restriction (−0.14, p<0.05); Behavioral Control (0.27, p<0.001); Coviewing (0.16, p<0.01); Planful Restriction (−0.20, p<0.001); Commercial Endorsement (0.11, p<0.05), which provides support for construct validity. Conclusion The Parenting Practices Regarding TV Viewing (PPRTV) scale measures 7 domains of parenting practices, and has good initial reliability and validity. It allows investigators to conduct more in-depth evaluations of the role parents play in socializing young children on TV use. Results of such work will be important to informing the design of interventions aiming to ensure healthy screen media habits in young children. PMID:27355878

Associations between television viewing and love styles: an interpretation using cultivation theory.

PubMed

Hetsroni, Amir

2012-02-01

This study evaluated the associations between television viewing and love styles. The Love Attitudes Scale (LAS), based on Lee's love style taxonomy, was administered to a sample of 338 unmarried Israeli students along with questions about TV viewing habits, current involvement in a serious romantic relationship, and marital intentions. A confirmatory factor analysis of the LAS indicated that the expected six-factor solution adequately fit the data. Correlations between individual love styles and TV viewing were small to moderate, ranging from .12 to .29. Scores for Ludus love style correlated positively with viewing of news and general programming. Those for Pragma love style correlated positively with news viewing and negatively with viewing genres frequently including love themes such as soap operas and family drama, while scores for Eros love style positively correlated with watching these love abundant genres. No significant association was found for TV viewing with Storge, Mania, and Agape love styles. Hierarchical regression using demographic variables, love status, and viewing habits mirrored these results, with the unique R2 for Ludus, Pragma, and Eros ranging from 1.8% to 8%, while the total variance accounted for by the models ranged from 12% to 21%. The findings can be interpreted as support for a weak cultivation effect, in which habits in long-term TV viewing among young adults correspond to small to moderate tendencies for particular love styles that thematically relate them. However, because they are correlational, the findings could equally be interpreted in terms of tendencies that exist due to modeling within families and socialization during development.

Soybean canopy reflectance as a function of view and illumination geometry

NASA Technical Reports Server (NTRS)

Bauer, M. E. (Principal Investigator); Ranson, K. J.; Vanderbilt, V. C.; Biehl, L. L.; Robinson, B. F.

1982-01-01

The results of an experiment designed to characterize a soybean field by its reflectance at various view and illumination angles and by its physical and agronomic attributes are presented. Reflectances were calculated from measurements at four wavelength bands through eight view azimuth and seven view zenith directions for various solar zenith and azimuth angles during portions of three days. An ancillary data set consisting of the agronomic and physical characteristics of the soybean field is described. The results indicate that the distribution of reflectance from a soybean field is a function of the solar illumination and viewing geometry, wavelength and row direction, as well as the state of development of the canopy. Shadows between rows greatly affected the reflectance in the visible wavelength bands and to a lesser extent in the near infrared wavelengths. A model is proposed that describes the reflectance variation as a function of projected solar and projected viewing angles. The model appears to approximate the reflectance variations in the visible wavelength bands from a canopy with well defined row structure.

3D object retrieval using salient views

PubMed Central

Shapiro, Linda G.

2013-01-01

This paper presents a method for selecting salient 2D views to describe 3D objects for the purpose of retrieval. The views are obtained by first identifying salient points via a learning approach that uses shape characteristics of the 3D points (Atmosukarto and Shapiro in International workshop on structural, syntactic, and statistical pattern recognition, 2008; Atmosukarto and Shapiro in ACM multimedia information retrieval, 2008). The salient views are selected by choosing views with multiple salient points on the silhouette of the object. Silhouette-based similarity measures from Chen et al. (Comput Graph Forum 22(3):223–232, 2003) are then used to calculate the similarity between two 3D objects. Retrieval experiments were performed on three datasets: the Heads dataset, the SHREC2008 dataset, and the Princeton dataset. Experimental results show that the retrieval results using the salient views are comparable to the existing light field descriptor method (Chen et al. in Comput Graph Forum 22(3):223–232, 2003), and our method achieves a 15-fold speedup in the feature extraction computation time. PMID:23833704

Comparison between Ki67 labeling index determined using image analysis software with virtual slide system and that determined visually in breast cancer.

PubMed

Maeda, Ichiro; Abe, Kayoko; Koizumi, Hirotaka; Nakajima, Chika; Tajima, Shinya; Aoki, Hiromi; Tsuchiya, Junichi; Tsuchiya, Seiko; Tsuchiya, Kyoko; Shimo, Arata; Tsugawa, Koichiro; Ueno, Takahiko; Tatsunami, Shinobu; Takagi, Masayuki

2016-09-01

In recent papers, Ki67 labeling index (LI) has been used to classify breast cancer patients into the low and high Ki67LI groups for comparison studies, which showed significant differences in many prognostic factors. It has not been clarified whether image analysis software can be used for calculating LI in breast cancer. In our study, we examined whether Ki67LI in breast cancer calculated using image analysis software correlates with that measured on the basis of visual. Fifty patients were randomly selected among breast cancer patients who underwent surgical operation from March, 2010 to May, 2010 in our hospital without preoperative chemotherapy. In this study, for the virtual slide system (VSS: VS120-L100, Olympus, Tokyo, Japan), the high-resolution VSs of all the 50 patients were prepared as samples. The image analysis software use for calculating LI was Tissuemorph Digital Pathology (Tissuemorph DP: Visiopharm, Hoersholm, Denmark). The calculated LI was extracted from 3 to 5 views containing hot spots. The LI calculated using Tissuemorph DP was designed as LI/image/T. The digital image of 3 to 5 LI/image/T views was printed out, and on the digital photograph, we counted visually the number of Ki67-immunopositive cells in exactly the same area, and the percentage of Ki67-immunopositive cells was designed as LI/direct. Moreover, a pathologist's assistant (PA) determined the tumor area in the same specimen using VSS and calculated LI using Tissuemorph DP, which was designed as LI/image/PA. The chief pathologist (CP) similarly calculated LI which was designed as LI/image/CP. We evaluated the degree of agreement between different data sets "LI/image/T and LI/direct" and "LI/image/T, LI/image/CP, and LI/image/PA" by using interclass correlation coefficient (ICC). The average counts of cells were as follows: LI/direct, 3209.7 ± 1970.4 (SD); LI/image/T, 2601.6 ± 1697.1; LI/image/PA, 2886.5 ± 2027.5; LI/image/CP, 18805.5 ± 22293.4. The values of LI/direct and LI/image/T showed almost perfect agreement as showed by an ICC of 0.885 (95 % CI, 0.806-0.933; p < 0.001). The agreement among three investigators was almost perfect. The obtained ICC was 0.825 (95 % CI, 0.739-0.890; p < 0.001) among the data of LI/image/T, LI/image/CP and LI/image/PA. There were five cases that immunopositivity for Ki67 showed a more than 10 % disagreement between LI/direct and LI/image/T. The merits of calculating Ki67 LI using Tissuemorph DP are as follows. First, the staining intensity of the cells to be counted can be adjusted. Second, the portion of a tumor including "hot spots" for counting can be chosen. Third, many cancer cells can be counted more rapidly using Tissuemorph DP than by visual observation. However, it is important that pathologist should check and carry out the final decision of the data, when Ki67 LI using Tissuemorph DP is calculated.

Use of the Ishikawa diagram in a case-control analysis to assess the causes of a diffuse lamellar keratitis outbreak.

PubMed

Lira, Luis Henrique; Hirai, Flávio E; Oliveira, Marivaldo; Portellinha, Waldir; Nakano, Eliane Mayumi

2017-01-01

To identify the causes of a diffuse lamellar keratitis (DLK) outbreak using a systematic search tool in a case-control analysis. An Ishikawa diagram was used to guide physicians to determine the potential risk factors involved in this outbreak. Coherence between the occurrences and each possible cause listed in the diagram was verified, and the total number of eyes at risk was used to calculate the proportion of affected eyes. Multivariate analysis was performed using logistic regression to determine the independent effect of the risk factors, after controlling for confounders and test interactions. All DLK cases were reported in 2007 between June 13 and December 21; during this period, 3,698 procedures were performed. Of the 1,682 flap-related procedures, 204 eyes of 141 individuals presented with DLK. No direct relationship was observed between the occurrence of DLK and the presence of any specific factors; however, flap-lifting enhancements, procedures performed during the morning shift, and non-use of therapeutic contact lenses after the surgery were significantly related to higher occurrence percentages of this condition. The Ishikawa diagram, like most quality tools, is a visualization and knowledge organization tool. This systematization allowed the investigators to thoroughly assess all the possible causes of DLK outbreak. A clear view of the entire surgical logistics permitted even more rigid management of the main factors involved in the process and, as a result, highlighted factors that deserved attention. The case-control analysis on every factor raised by the Ishikawa diagram indicated that the commonly suspected factors such as biofilm contamination of the water reservoir in autoclaves, the air-conditioning filter system, glove powder, microkeratome motor oil, and gentian violet markers were not related to the outbreak.

46 CFR 42.15-25 - Hatchways closed by portable covers and secured weathertight by tarpaulins and battening devices.

Code of Federal Regulations, 2010 CFR

2010-10-01

... maximum stress thus calculated and the factor 4.25 shall not exceed the minimum ultimate strength of the... foot on hatchways in position 2 and the product of the maximum stress thus calculated and the factor 5... product of the maximum stress thus calculated and the factor 5 shall not exceed the minimum ultimate...

46 CFR 42.15-25 - Hatchways closed by portable covers and secured weathertight by tarpaulins and battening devices.

Code of Federal Regulations, 2011 CFR

2011-10-01

... maximum stress thus calculated and the factor 4.25 shall not exceed the minimum ultimate strength of the... foot on hatchways in position 2 and the product of the maximum stress thus calculated and the factor 5... product of the maximum stress thus calculated and the factor 5 shall not exceed the minimum ultimate...

46 CFR 42.15-25 - Hatchways closed by portable covers and secured weathertight by tarpaulins and battening devices.

Code of Federal Regulations, 2012 CFR

2012-10-01

... maximum stress thus calculated and the factor 4.25 shall not exceed the minimum ultimate strength of the... foot on hatchways in position 2 and the product of the maximum stress thus calculated and the factor 5... product of the maximum stress thus calculated and the factor 5 shall not exceed the minimum ultimate...

46 CFR 42.15-25 - Hatchways closed by portable covers and secured weathertight by tarpaulins and battening devices.

Code of Federal Regulations, 2014 CFR

2014-10-01

... maximum stress thus calculated and the factor 4.25 shall not exceed the minimum ultimate strength of the... foot on hatchways in position 2 and the product of the maximum stress thus calculated and the factor 5... product of the maximum stress thus calculated and the factor 5 shall not exceed the minimum ultimate...

46 CFR 42.15-25 - Hatchways closed by portable covers and secured weathertight by tarpaulins and battening devices.

Code of Federal Regulations, 2013 CFR

2013-10-01

... maximum stress thus calculated and the factor 4.25 shall not exceed the minimum ultimate strength of the... foot on hatchways in position 2 and the product of the maximum stress thus calculated and the factor 5... product of the maximum stress thus calculated and the factor 5 shall not exceed the minimum ultimate...

Analysis of condition for uniform lighting generated by array of light emitting diodes with large view angle.

PubMed

Qin, Zong; Wang, Kai; Chen, Fei; Luo, Xiaobing; Liu, Sheng

2010-08-02

In this research, the condition for uniform lighting generated by array of LEDs with large view angle was studied. The luminous intensity distribution of LED is not monotone decreasing with view angle. A LED with freeform lens was designed as an example for analysis. In a system based on LEDs designed in house with a thickness of 20mm and rectangular arrangement, the condition for uniform lighting was derived and the analytical results demonstrated that the uniformity was not decreasing monotonously with the increasing of LED-to-LED spacing. The illuminance uniformities were calculated with Monte Carlo ray tracing simulations and the uniformity was found to increase with the increasing of certain LED-to-LED spacings anomalously. Another type of large view angle LED and different arrangements were discussed in addition. Both analysis and simulation results showed that the method is available for LED array lighting system design on the basis of large view angle LED..

User's manual for sustainable transportation performance measures calculator

DOT National Transportation Integrated Search

2010-08-01

Sustainable transportation can be viewed as the provision of safe, effective, and efficient : access and mobility into the future while considering economic, social, and environmental : needs. For the Texas Department of Transportation (TxDOT) to ass...

Noncontact torque measurement using stroboscopic techniques

NASA Technical Reports Server (NTRS)

Leonard, W. H.

1972-01-01

Noncontact torquemeter measures torsional deflection of rotating shaft and results are viewed on vernier scale. Magnitude of torque must be calculated from measured deflection. Device has no electric connections with the rotating member and is easy to use.

Molecular microelectrostatic view on electronic states near pentacene grain boundaries

NASA Astrophysics Data System (ADS)

Verlaak, Stijn; Heremans, Paul

2007-03-01

Grain boundaries are the most inevitable and pronounced structural defects in pentacene films. To study the effect of those structural defects on the electronic state distribution, the energy levels of a hole on molecules at and near the defect have been calculated using a submolecular self-consistent-polarization-field approach in combination with atomic charge-quadrupole interaction energy calculations. This method has been benchmarked prior to application on four idealized grain boundaries: a grain boundary void, a void with molecules squeezed in between two grains, a boundary between two grains with different crystallographic orientations, and a grain boundary void in which a permanent dipole (e.g., a water molecule) has nested. While idealized, those views highlight different aspects of real grain boundaries. Implications on macroscopic charge transport models are discussed, as well as some relation between growth conditions and the formation of the grain boundary.

Gender Advantages and Gender Normality in the Views of Estonian Secondary School Students

ERIC Educational Resources Information Center

Kuurme, Tiiu; Kasemaa, Gertrud

2015-01-01

The aim of the study on Estonian secondary school students was to obtain an overview of the gender-related views and experiences of the everyday school life by students, and to analyse the school-related factors in the development of gender roles and gender-related expectations. We view gender equality as a central condition for social…

The scalar and electromagnetic form factors of the nucleon in dispersively improved Chiral EFT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alarcon, Jose Manuel

We present a method for calculating the nucleon form factors of G-parity-even operators. This method combines chiral effective field theory (χEFT) and dispersion theory. Through unitarity we factorize the imaginary part of the form factors into a perturbative part, calculable with χEFT, and a non-perturbative part, obtained through other methods. We consider the scalar and electromagnetic (EM) form factors of the nucleon. The results show an important improvement compared to standard chiral calculations, and can be used in analysis of the low-energy properties of the nucleon.

Progressive addition lenses--measurements and ratings.

PubMed

Sheedy, Jim; Hardy, Raymond F; Hayes, John R

2006-01-01

This study is a followup to a previous study in which the optics of several progressive addition lens (PALs) designs were measured and analyzed. The objective was to provide information about various PAL designs to enable eye care practitioners to select designs based on the particular viewing requirements of the patient. The optical properties of 12 lenses of the same power for each of 23 different PAL designs were measured with a Rotlex Class Plus lens analyzer. Lenses were ordered through optical laboratories and specified to be plano with a +2.00 diopters add. Measurements were normalized to plano at the manufacturer-assigned location for the distance power to eliminate laboratory tolerance errors. The magnitude of unwanted astigmatism and the widths and areas of the distance, intermediate, and near viewing zones were calculated from the measured data according to the same criteria used in a previous study. The optical characteristics of the different PAL designs were significantly different from one another. The differences were significant in terms of the sizes and widths of the viewing zones, the amount of unwanted astigmatism, and the minimum fitting height. Ratings of the distance, intermediate, and near viewing areas were calculated for each PAL design based on the widths and sizes of those zones. Ratings for unwanted astigmatism and recommended minimum fitting heights were also determined. Ratings based on combinations of viewing zone ratings are also reported. The ratings are intended to be used to select a PAL design that matches the particular visual needs of the patient and to evaluate the success and performance of currently worn PALs. Reasoning and task analyses suggest that these differences can be used to select a PAL design to meet the individual visual needs of the patient; clinical trials studies are required to test this hypothesis.

A Study of the Readiness of Hospitals for Implementation of High Reliability Organizations Model in Tehran University of Medical Sciences.

PubMed

Mousavi, Seyed Mohammad Hadi; Dargahi, Hossein; Mohammadi, Sara

2016-10-01

Creating a safe of health care system requires the establishment of High Reliability Organizations (HROs), which reduces errors, and increases the level of safety in hospitals. This model focuses on improving reliability through higher process design, building a culture of accreditation, and leveraging human factors. The present study intends to determine the readiness of hospitals for the establishment of HROs model in Tehran University of Medical Sciences from the viewpoint of managers of these hospitals. This is a descriptive-analytical study carried out in 2013-2014. The research population consists of 105 senior and middle managers of 15 hospitals of Tehran University of Medical Sciences. The data collection tool was a 55-question researcher-made questionnaire, included six elements of HROs to assess the level of readiness for establishing HROS model from managers' point of view. The validity of the questionnaire was calculated through the content validity method using 10 experts in the area of hospitals' accreditation, and its reliability was calculated through test-retest method with a correlation coefficient of 0.90. The response rate was 90 percent. The Likert scale was used for the questions, and data analysis was conducted through SPSS version 21 Descriptive statistics was presented via tables and normal distributions of data and means. Analytical methods, including t-test, Mann-Whitney, Spearman, and Kruskal-Wallis, were used for presenting inferential statistics. The study showed that from the viewpoint of senior and middle managers of the hospitals considered in this study, these hospitals are indeed ready for acceptance and establishment of HROs model. A significant relationship was showed between HROs model and its elements with demographic details of managers like their age, work experience, management experience, and level of management. Although the studied hospitals, as viewed by their managers, are capable of attaining the goals of HROs, it seems there are a lot of challenges in this way. Therefore, it is suggested that a detailed audit is conducted among hospitals' current status regarding different characteristics of HROs, and workshops are held for medical and non-medical employees and managers of hospitals as an influencing factor; and a re-assessment process afterward, can help moving the hospitals from their current position towards an HROs culture.

Impact of Contact With Grandparents on Children's and Adolescents' Views on the Elderly.

PubMed

Flamion, Allison; Missotten, Pierre; Marquet, Manon; Adam, Stéphane

2017-12-19

Stereotypes, prejudice, and discrimination against the elderly (ageism) may manifest themselves in children at an early age. However, the factors influencing this phenomenon are not well known. Using both explicit and open-ended questions, this study analyzed the influence of personal and familial parameters on the views of 1,151 seven- to sixteen-year-old Belgian children and adolescents on the elderly. Four factors were found to affect these views: gender (girls had slightly more positive views than boys), age (ageism was lowest in 10- to 12-year-old, reminiscent of other forms of stereotypes and cognitive developmental theories), grandparents' health, and most importantly, quality of contact with grandparents (very good and good contacts correlated with more favorable feelings toward the elderly, especially in children with frequent contacts). © 2017 The Authors. Child Development © 2017 Society for Research in Child Development, Inc.

Muscle, bone, and the Utah paradigm: a 1999 overview.

PubMed

Frost, H M

2000-05-01

The still-evolving Utah paradigm of skeletal physiology supplements former ideas about the control of postnatal bone strength and "mass" in health and disease, on earth and in orbit, and as functions of physical activities including sports. In its view, peak muscle forces on bone dominate control of the biologic mechanisms that control changes in our postnatal whole-bone strength and mass. This contrasts with former ideas that chiefly nonmechanical factors dominate that control and mechanical factors have little influence on it. The newer view begs the question of how such a bone-muscle relationship would work, and the Utah paradigm offers plausible explanations for that. Whereas many biomechanicians, orthopedists, and sports medicine experts might find the newer view sensible, some people in other disciplines may not. This article summarizes some evidence that support the Utah paradigm and the above-stated view and explores some of the paradigm's features and implications.

An exploration of motivations for two screen viewing, social interaction behaviors, and factors that influence viewing intentions.

PubMed

Shim, Hongjin; Oh, Poong; Song, Hyunjin; Lee, Yeonkyung

2015-03-01

This study explores whether, and how, motivations for two screen viewing predicted social interaction behaviors and subsequent viewing intention of TV programs. A total of 453 respondents who responded that they use social networking sites (SNSs) via smartphones and actively watch entertainment programs completed an online survey questionnaire. In agreement with uses and gratifications assumptions, motivations for TSV predicted distinctive sets of social interaction behaviors, which mediated the influence of motivations on viewing intentions. Respondents' two screen viewing was meaningfully related with social interaction, engagement with programs, information seeking, and passing time. Results suggest that two screen viewing could provide shared experiences nourishing social capital and reintegrate TV audiences by social adhesive resulting from TV with SNSs.

Using simplifications of reality in the real world: Robust benefits of models for decision making

NASA Astrophysics Data System (ADS)

Hunt, R. J.

2008-12-01

Models are by definition simplifications of reality; the degree and nature of simplification, however, is debated. One view is "the world is 3D, heterogeneous, and transient, thus good models are too" - the more a model directly simulates the complexity of the real world the better it is considered to be. An alternative view is to only use simple models up front because real-world complexity can never be truly known. A third view is construct and calibrate as many models as predictions. A fourth is to build highly parameterized models and either look at an ensemble of results, or use mathematical regularization to identify an optimal most reasonable parameter set and fit. Although each view may have utility for a given decision-making process, there are common threads that perhaps run through all views. First, the model-construction process itself can help the decision-making process because it raises the discussion of opposing parties from one of contrasting professional opinions to discussion of reasonable types and ranges of model inputs and processes. Secondly, no matter what view is used to guide the model building, model predictions for the future might be expected to perform poorly in the future due to unanticipated future changes and stressors to the underlying system simulated. Although this does not reduce the obligation of the modeler to build representative tools for the system, it should serve to temper expectations of model performance. Finally, perhaps the most under-appreciated utility of models is for calculating the reduction in prediction uncertainty resulting from different data collection strategies - an attractive feature separate from the calculation and minimization of absolute prediction uncertainty itself. This type of model output facilitates focusing on efficient use of current and future monitoring resources - something valued by many decision-makers regardless of background, system managed, and societal context.

Which factors determine our quality of life, health and ability? Results from a Danish population sample and the Copenhagen perinatal cohort.

PubMed

Ventegodt, Søren; Flensborg-Madsen, Trine; Andersen, Niels Jørgen; Merrick, Joav

2008-07-01

To examine the statistical associations between Global Quality of Life (QOL) and a series of indicators representing health, ability, philosophy of life, sexuality, quality of working life and other medically relevant aspects of life. Cross-sectional comparative study using the self-administered SEQOL questionnaire. The Quality of Life Research Center, the University Hospital Copenhagen, Denmark. (1) A representative sample of 2,500 Danes (18-88 years) randomly selected from the CPR register, (2) Follow-up survey of members of the Copenhagen Perinatal Birth Cohort, 4,648 Danes (31-33 years). The associations were measured qualitatively as well as quantitatively calculating the difference in percentage and using the method of weight modified linear regression. QOL, measured by SEQOL (self-evaluation of quality of life), containing eight global QOL measures: well-being, life-satisfaction, happiness, fulfillment of needs, experience of temporal and spatial domains, expression of life's potentials and objective factors. Strongest was the association between QOL, overall view of life (41.5% / 59.1%), relationship to self (39.3% / 56.8%), partner (32.2% / 31.7%) and friends (33.3% / 42.7%). Different aspects of physical as well as psychological health were also strongly correlated with QOL: self-perceived physical health (33.2% /29.4%), satisfaction with own health (27.3% / 29.0%), self-perceived mental health (38.4/51.0), number of severe health problems (29.8% / 35.3%). Objective factors such as income, age, sex, weight and social group did not have any noteworthy relationship to QOL, and neither did lifestyle factors such as tobacco and alcohol consumption, drug use, exercise, and diet. It seems that the factors important for present QOL and health is derived from good relations, with the close as well as the distant world, and overall view of life. What one possesses in objective terms--money, status, work--does not seem to be important to global quality of life and of little importance to self-assessed health. Our results indicate that what is really important is not what one has, but how he sees, evaluates and experiences what he has. The person's level of consciousness and responsible attitude towards life and others seem far more important for the global quality of life and health.

Principal component analysis on molecular descriptors as an alternative point of view in the search of new Hsp90 inhibitors.

PubMed

Lauria, Antonino; Ippolito, Mario; Almerico, Anna Maria

2009-10-01

Inhibiting a protein that regulates multiple signal transduction pathways in cancer cells is an attractive goal for cancer therapy. Heat shock protein 90 (Hsp90) is one of the most promising molecular targets for such an approach. In fact, Hsp90 is a ubiquitous molecular chaperone protein that is involved in folding, activating and assembling of many key mediators of signal transduction, cellular growth, differentiation, stress-response and apoptothic pathways. With the aim to analyze which molecular descriptors have the higher importance in the binding interactions of these classes, we first performed molecular docking experiments on the 187 Hsp90 inhibitors included in the BindingDB, a public database of measured binding affinities. Further, for each frozen conformation obtained from the docking, a set of 250 molecular descriptors was calculated, and the resulting Structure/Descriptors matrix was submitted to Principal Component Analysis. From the factor scores it emerged a good clusterization among similar compounds both in terms of structural class and activity spectrum, while examination of the loadings of the first two factors also allowed to study the classes of descriptors which mainly contribute to each one.

Remarks on entanglement entropy in string theory

NASA Astrophysics Data System (ADS)

Balasubramanian, Vijay; Parrikar, Onkar

2018-03-01

Entanglement entropy for spatial subregions is difficult to define in string theory because of the extended nature of strings. Here we propose a definition for bosonic open strings using the framework of string field theory. The key difference (compared to ordinary quantum field theory) is that the subregion is chosen inside a Cauchy surface in the "space of open string configurations." We first present a simple calculation of this entanglement entropy in free light-cone string field theory, ignoring subtleties related to the factorization of the Hilbert space. We reproduce the answer expected from an effective field theory point of view, namely a sum over the one-loop entanglement entropies corresponding to all the particle-excitations of the string, and further show that the full string theory regulates ultraviolet divergences in the entanglement entropy. We then revisit the question of factorization of the Hilbert space by analyzing the covariant phase-space associated with a subregion in Witten's covariant string field theory. We show that the pure gauge (i.e., BRST exact) modes in the string field become dynamical at the entanglement cut. Thus, a proper definition of the entropy must involve an extended Hilbert space, with new stringy edge modes localized at the entanglement cut.

Intercomparison of 4 Years of Global Formaldehyde Observations from the GOME-2 and OMI Sensors

NASA Astrophysics Data System (ADS)

De Smedt, Isabelle; Van Roozendael, Michel; Stravrakou, Trissevgeni; Muller, Jean-Francois; Chance, Kelly; Kurosu, Thomas

2012-11-01

Formaldehyde (H2CO) tropospheric columns have been retrieved since 2007 from backscattered UV radiance measurements performed by the GOME-2 instrument on the EUMETSAT METOP-A platform. This data set extends the successful time-series of global H2CO observations established with GOME/ ERS-2 (1996-2003), SCIAMACHY/ ENVISAT (2003-2012), and OMI on the NASA AURA platform (2005-now). In this work, we perform an intercomparison of the H2CO tropospheric columns retrieved from GOME-2 and OMI between 2007 and 2010, respectively at BIRA-IASB and at Harvard SAO. We first compare the global formaldehyde data products that are provided by each retrieval group. We then investigate each step of the retrieval procedure: the slant column fitting, the reference sector correction and the air mass factor calculation. New air mass factors are computed for OMI using external parameters consistent with those used for GOME-2. By doing so, the impacts of the different a priori profiles and aerosol corrections are quantified. The remaining differences are evaluated in view of the expected diurnal variations of the formaldehyde concentrations, based on ground-based measurements performed in the Beijing area.

Money creation and circulation in a credit economy

NASA Astrophysics Data System (ADS)

Xiong, Wanting; Fu, Han; Wang, Yougui

2017-01-01

This paper presents a multi-agent model describing the main mechanisms of money creation and money circulation in a credit economy. Our special attention is paid to the role of debt in the two processes. With the agent-based modeling approach, macro phenomena are well founded in micro-based causalities. A hypothetical economy composed of a banking system and multiple traders is proposed. Instead of being a pure financial intermediary, the banking system is viewed as the center of money creation and an accelerator of money circulation. Agents finance their expenditures not only by their own savings but also through bank loans. Through mathematical calculations and numerical simulation, we identify the determinants of money multiplier and those of velocity of money. In contrast to the traditional money creation model, the money multiplier is determined not only by the behavior of borrowing but also by the behavior of repayment as well. The velocity of money is found to be influenced by both money-related factors such as the expenditure habits of agents with respect to their income and wealth and debt-related factors such as borrowing and repayment behaviors of debtors and the reserve requirements faced by banks.

Soils: man-caused radioactivity and radiation forecast

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gablin, Vassily

2007-07-01

Available in abstract form only. Full text of publication follows: One of the main tasks of the radiation safety guarantee is non-admission of the excess over critical radiation levels. In Russia they are man-caused radiation levels. Meanwhile any radiation measurement represents total radioactivity. That is why it is hard to assess natural and man-caused contributions to total radioactivity. It is shown that soil radioactivity depends on natural factors including radioactivity of rocks and cosmic radiation as well as man-caused factors including nuclear and non-nuclear technologies. Whole totality of these factors includes unpredictable (non-deterministic) factors - nuclear explosions and radiation accidents,more » and predictable ones (deterministic) - all the rest. Deterministic factors represent background radioactivity whose trends is the base of the radiation forecast. Non-deterministic factors represent man-caused radiation treatment contribution which is to be controlled. This contribution is equal to the difference in measured radioactivity and radiation background. The way of calculation of background radioactivity is proposed. Contemporary soils are complicated technologically influenced systems with multi-leveled spatial and temporary inhomogeneity of radionuclides distribution. Generally analysis area can be characterized by any set of factors of soil radioactivity including natural and man-caused factors. Natural factors are cosmic radiation and radioactivity of rocks. Man-caused factors are shown on Fig. 1. It is obvious that man-caused radioactivity is due to both artificial and natural emitters. Any result of radiation measurement represents total radioactivity i.e. the sum of activities resulting from natural and man-caused emitters. There is no gauge which could separately measure natural and man-caused radioactivity. That is why it is so hard to assess natural and man-caused contributions to soil radioactivity. It would have been possible if human activity had led to contamination of soil only by artificial radionuclides. But we can view a totality of soil radioactivity factors in the following way. (author)« less

Uranium mining industry views on ICRP statement on radon.

PubMed

Takala, J

2012-01-01

In 2009, the International Commission on Radiological Protection issued a statement on radon which stated that the dose conversion factor for radon progeny would likely double, and the calculation of risk from radon should move to a dosimetric approach, rather than the longstanding epidemiological approach. Through the World Nuclear Association, whose members represent over 90% of the world's uranium production, industry has been examining this issue with a goal of offering expertise and knowledge to assist with the practical implementation of these evolutionary changes to evaluating the risk from radon progeny. Industry supports the continuing use of the most current epidemiological data as a basis for risk calculation, but believes that further examination of these results is needed to better understand the level of conservatism in the potential epidemiological-based risk models. With regard to adoption of the dosimetric approach, industry believes that further work is needed before this is a practical option. In particular, this work should include a clear demonstration of the validation of the dosimetric model which includes how smoking is handled, the establishment of a practical measurement protocol, and the collection of relevant data for modern workplaces. Industry is actively working to address the latter two items. Copyright © 2012. Published by Elsevier Ltd.

Telescope aperture optimization for spacebased coherent wind lidar

NASA Astrophysics Data System (ADS)

Ge, Xian-ying; Zhu, Jun; Cao, Qipeng; Zhang, Yinchao; Yin, Huan; Dong, Xiaojing; Wang, Chao; Zhang, Yongchao; Zhang, Ning

2015-08-01

Many studies have indicated that the optimum measurement approach for winds from space is a pulsed coherent wind lidar, which is an active remote sensing tool with the characteristics that high spatial and temporal resolutions, real-time detection, high mobility, facilitated control and so on. Because of the significant eye safety, efficiency, size, and lifetime advantage, 2μm wavelength solid-state laser lidar systems have attracted much attention in spacebased wind lidar plans. In this paper, the theory of coherent detection is presented and a 2μm wavelength solid-state laser lidar system is introduced, then the ideal aperture is calculated from signal-to-noise(SNR) view at orbit 400km. However, considering real application, even if the lidar hardware is perfectly aligned, the directional jitter of laser beam, the attitude change of the lidar in the long round trip time of the light from the atmosphere and other factors can bring misalignment angle. So the influence of misalignment angle is considered and calculated, and the optimum telescope diameter(0.45m) is obtained as the misalignment angle is 4 μrad. By the analysis of the optimum aperture required for spacebased coherent wind lidar system, we try to present the design guidance for the telescope.

Thermal infrared imaging of the variability of canopy-air temperature difference distribution for heavy metal stress levels discrimination in rice

NASA Astrophysics Data System (ADS)

Zhang, Biyao; Liu, Xiangnan; Liu, Meiling; Wang, Dongmin

2017-04-01

This paper addresses the assessment and interpretation of the canopy-air temperature difference (Tc-Ta) distribution as an indicator for discriminating between heavy metal stress levels. Tc-Ta distribution is simulated by coupling the energy balance equation with modified leaf angle distribution. Statistical indices including average value (AVG), standard deviation (SD), median, and span of Tc-Ta in the field of view of a digital thermal imager are calculated to describe Tc-Ta distribution quantitatively and, consequently, became the stress indicators. In the application, two grains of rice growing sites under "mild" and "severe" stress level were selected as study areas. A total of 96 thermal images obtained from the field measurements in the three growth stages were used for a separate application of a theoretical variation of Tc-Ta distribution. The results demonstrated that the statistical indices calculated from both simulated and measured data exhibited an upward trend as the stress level becomes serious because heavy metal stress would only raise a portion of the leaves in the canopy. Meteorological factors could barely affect the sensitivity of the statistical indices with the exception of the wind speed. Among the statistical indices, AVG and SD were demonstrated to be better indicators for stress levels discrimination.

Vestibular and Non-vestibular Contributions to Eye Movements that Compensate for Head Rotations during Viewing of Near Targets

NASA Technical Reports Server (NTRS)

Han, Yanning H.

2006-01-01

We studied horizontal eye movements induced by en-bloc yaw rotation, over a frequency range 0.2 - 2.8 Hz, in 10 normal human subjects as they monocularly viewed a target located at their near point of focus. We measured gain and phase relationships between eye-in-head velocity and head velocity when the near target was either earth-fixed or head-fixed. During viewing of the earth-fixed near target, median gain was 1.49 (range 1.24 - 1.87) at 0.2 Hz for the group of subjects, but declined at higher frequencies, so that at 2.8 Hz median gain was 1.08 (range 0.68 - 1.67). During viewing of the head-fixed near target , median gain was 0.03 (range 0.01 - 0.10) at 0.2 Hz for the group of subjects, but increased at higher frequencies, so that at 2.8 Hz median gain was 0.71 (range 0.28 - 0.94). We estimated the vestibular contribution to these responses vestibulo-ocular reflex gain (Gvor) by applying transient head perturbations (peak acceleration> 1,000 deg/s(exp 2)) during sinusoidal rotation under the two viewing conditions. Median Gvor, estimated < 70ms after the onset of head perturbation, was 0.98 (range 0.39 - 1.42) while viewing the earth-fixed near target, and 0.97 (range 0.37 - 1.33) while viewing the head-fixed near target. For the group of subjects, 9 out of 10 subjects showed no significant difference of Gvor between the two viewing conditions ( p > 0.053 ) at all test frequencies. Since Gvor accounted for only -73% of the overall response gain during viewing of the earth-fixed target, we investigated the relative contributions of non-vestibular factors. When subjects viewed the earth-fixed target under strobe illumination, to eliminate retinal image slip information, the gain of compensatory eye movements declined compared with viewing in ambient room light. During sum-of-sine head rotations, while viewing the earth-fixed target, to Han et al./VOR during near-viewing minimize contributions from predictive mechanisms, gain also declined Nonetheless, simple superposition of smooth-pursuit tracking of sinusoidal target motion could not fully account for the overall response at higher frequencies, suggesting other nonvestibular contributions. During binocular viewing conditions when vergence angle was significantly greater than monocular viewing (p < 0.00l), the gain of compensatory eye movements did not show proportional change; indeed, gain could not be correlated with vergence angle during monocular or binocular viewing. We conclude that several separate factors contribute to generate eye rotations during sinusoidal yaw head rotations while viewing a near target; these include the VOR, visual-tracking eye movements that utilize retinal image motion, predictive eye movements and, possibly, other unidentified non-vestibular factors. For these experiments, vergence was not an important determinant of response gam.

Health care professionals' views of the factors influencing the decision to refer patients to a stroke rehabilitation trial.

PubMed

Thomas, Nessa; Plant, Sarah; Woodward-Nutt, Kate; Prior, Yeliz; Tyson, Sarah

2015-12-18

Effective recruitment is an essential element of successful research but notoriously difficult to achieve. This article examines health care professionals' views on the factors influencing decision-making regarding referral to a stroke rehabilitation trial. Semi-structured interviews and a card-sorting task were undertaken with stroke service staff in acute and community hospital trusts. Data analysis used a thematic framework approach. Twenty-seven qualified health care professionals from 12 (6 acute and 6 community) hospital trusts and one charity participated. Four main factors emerged: patient-related, professional views, the organisation and research logistics, which all contributed to staff's decision about whether to refer patients to a trial. Clinicians identified patient-related factors as the most frequent influence and considered themselves the patients' advocate. They used their knowledge of the patient to anticipate the patients' reaction to possible participation and tended to only refer those whom they perceived would respond positively. Participants also identified experience of research, a sense of ownership of the project and a positive view of the intervention being evaluated as factors influencing referral. The need to prioritise clinical matters, meet managerial demands and cope with constant change were organisational factors impacting negatively on referral. Staff often simply forgot about recruitment in the face of other higher priorities. Quick, simple, flexible research processes that were closely aligned with existing ways of working were felt to facilitate recruitment. Patient- and professional-related factors were the most frequent influence on clinicians' recruitment decisions, which often had a 'gate-keeping' effect. Managerial and clinical responsibility to juggle multiple (often higher) priorities was also an important factor. To facilitate recruitment, researchers need to develop strategies to approach potential participants as directly as possible to enable them to make their own decisions about participation; ensure that research processes are as quick and simple as possible; align with existing clinical pathways and systems; and give regular reminders and ongoing support to promote recruitment. ISRCTN, 98287938 . Registered 6 May 2015.

Radiometric Cross-calibration of KOMPSAT-3A with Landsat-8

NASA Astrophysics Data System (ADS)

Shin, D. Y.; Ahn, H. Y.; Lee, S. G.; Choi, C. U.; Kim, J. S.

2016-06-01

In this study, Cross calibration was conducted at the Libya 4 PICS site on 2015 using Landsat-8 and KOMPSAT-3A. Ideally a cross calibration should be calculated for each individual scene pair because on any given date the TOA spectral profile is influenced by sun and satellite view geometry and the atmospheric conditions. However, using the near-simultaneous images minimizes this effect because the sensors are viewing the same atmosphere. For the cross calibration, the calibration coefficient was calculated by comparing the at sensor spectral radiance for the same location calculated using the Landsat-8 calibration parameters in metadata and the DN of KOMPSAT-3A for the regions of interest (ROI). Cross calibration can be conducted because the satellite sensors used for overpass have a similar bandwidth. However, not all satellites have the same color filter transmittance and sensor reactivity, even though the purpose is to observe the visible bands. Therefore, the differences in the RSR should be corrected. For the cross-calibration, a calibration coefficient was calculated using the TOA radiance and KOMPSAT-3 DN of the Landsat-8 OLI overpassed at the Libya 4 Site, As a result, the accuracy of the calibration coefficient at the site was assumed to be ± 1.0%. In terms of the results, the radiometric calibration coefficients suggested here are thought to be useful for maintaining the optical quality of the KOMPSAT-3A.

Measured and Monte Carlo calculated k{sub Q} factors: Accuracy and comparison

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muir, B. R.; McEwen, M. R.; Rogers, D. W. O.

2011-08-15

Purpose: The journal Medical Physics recently published two papers that determine beam quality conversion factors, k{sub Q}, for large sets of ion chambers. In the first paper [McEwen Med. Phys. 37, 2179-2193 (2010)], k{sub Q} was determined experimentally, while the second paper [Muir and Rogers Med. Phys. 37, 5939-5950 (2010)] provides k{sub Q} factors calculated using Monte Carlo simulations. This work investigates a variety of additional consistency checks to verify the accuracy of the k{sub Q} factors determined in each publication and a comparison of the two data sets. Uncertainty introduced in calculated k{sub Q} factors by possible variation ofmore » W/e with beam energy is investigated further. Methods: The validity of the experimental set of k{sub Q} factors relies on the accuracy of the NE2571 reference chamber measurements to which k{sub Q} factors for all other ion chambers are correlated. The stability of NE2571 absorbed dose to water calibration coefficients is determined and comparison to other experimental k{sub Q} factors is analyzed. Reliability of Monte Carlo calculated k{sub Q} factors is assessed through comparison to other publications that provide Monte Carlo calculations of k{sub Q} as well as an analysis of the sleeve effect, the effect of cavity length and self-consistencies between graphite-walled Farmer-chambers. Comparison between the two data sets is given in terms of the percent difference between the k{sub Q} factors presented in both publications. Results: Monitoring of the absorbed dose calibration coefficients for the NE2571 chambers over a period of more than 15 yrs exhibit consistency at a level better than 0.1%. Agreement of the NE2571 k{sub Q} factors with a quadratic fit to all other experimental data from standards labs for the same chamber is observed within 0.3%. Monte Carlo calculated k{sub Q} factors are in good agreement with most other Monte Carlo calculated k{sub Q} factors. Expected results are observed for the sleeve effect and the effect of cavity length on k{sub Q}. The mean percent differences between experimental and Monte Carlo calculated k{sub Q} factors are -0.08, -0.07, and -0.23% for the Elekta 6, 10, and 25 MV nominal beam energies, respectively. An upper limit on the variation of W/e in photon beams from cobalt-60 to 25 MV is determined as 0.4% with 95% confidence. The combined uncertainty on Monte Carlo calculated k{sub Q} factors is reassessed and amounts to between 0.40 and 0.49% depending on the wall material of the chamber. Conclusions: Excellent agreement (mean percent difference of only 0.13% for the entire data set) between experimental and calculated k{sub Q} factors is observed. For some chambers, k{sub Q} is measured for only one chamber of each type--the level of agreement observed in this study would suggest that for those chambers the measured k{sub Q} values are generally representative of the chamber type.« less

3D reconstruction from multi-view VHR-satellite images in MicMac

NASA Astrophysics Data System (ADS)

Rupnik, Ewelina; Pierrot-Deseilligny, Marc; Delorme, Arthur

2018-05-01

This work addresses the generation of high quality digital surface models by fusing multiple depths maps calculated with the dense image matching method. The algorithm is adapted to very high resolution multi-view satellite images, and the main contributions of this work are in the multi-view fusion. The algorithm is insensitive to outliers, takes into account the matching quality indicators, handles non-correlated zones (e.g. occlusions), and is solved with a multi-directional dynamic programming approach. No geometric constraints (e.g. surface planarity) or auxiliary data in form of ground control points are required for its operation. Prior to the fusion procedures, the RPC geolocation parameters of all images are improved in a bundle block adjustment routine. The performance of the algorithm is evaluated on two VHR (Very High Resolution)-satellite image datasets (Pléiades, WorldView-3) revealing its good performance in reconstructing non-textured areas, repetitive patterns, and surface discontinuities.

Polar View Snow Service- Operational Snow Cover Mapping for Downstream Runoff Modeling and Hydropower Predictions

NASA Astrophysics Data System (ADS)

Bach, Heike; Appel, Florian; Rust, Felix; Mauser, Wolfram

2010-12-01

Information on snow cover and snow properties are important for hydrology and runoff modelling. Frequent updates of snow cover observation, especially for areas characterized by short-term snow dynamics, can help to improve water balance and discharge calculations. Within the GMES service element Polar View, VISTA offers a snow mapping service for Central Europe since several years [1, 2]. We outline the use of this near-real- time product for hydrological applications in Alpine environment. In particular we discuss the integration of the Polar View product into a physically based hydrological model (PROMET). This allows not only the provision of snow equivalent values, but also enhances river runoff modelling and its use in hydropower energy yield prediction. The GMES snow products of Polar View are thus used in a downstream service for water resources management, providing information services for renewable energy suppliers and energy traders.

17 CFR Appendix A to Part 39 - Application Guidance and Compliance With Core Principles

Code of Federal Regulations, 2010 CFR

2010-04-01

... management tools such as stress testing and value at risk calculations; and c. What contingency plans the... informal, which the clearing organization views as appropriate and applicable to its operations. 2. How...

Methods to model and predict the ViewRay treatment deliveries to aid patient scheduling and treatment planning

PubMed Central

Liu, Shi; Wu, Yu; Wooten, H. Omar; Green, Olga; Archer, Brent; Li, Harold

2016-01-01

A software tool is developed, given a new treatment plan, to predict treatment delivery time for radiation therapy (RT) treatments of patients on ViewRay magnetic resonance image‐guided radiation therapy (MR‐IGRT) delivery system. This tool is necessary for managing patient treatment scheduling in our clinic. The predicted treatment delivery time and the assessment of plan complexities could also be useful to aid treatment planning. A patient's total treatment delivery time, not including time required for localization, is modeled as the sum of four components: 1) the treatment initialization time; 2) the total beam‐on time; 3) the gantry rotation time; and 4) the multileaf collimator (MLC) motion time. Each of the four components is predicted separately. The total beam‐on time can be calculated using both the planned beam‐on time and the decay‐corrected dose rate. To predict the remain‐ing components, we retrospectively analyzed the patient treatment delivery record files. The initialization time is demonstrated to be random since it depends on the final gantry angle of the previous treatment. Based on modeling the relationships between the gantry rotation angles and the corresponding rotation time, linear regression is applied to predict the gantry rotation time. The MLC motion time is calculated using the leaves delay modeling method and the leaf motion speed. A quantitative analysis was performed to understand the correlation between the total treatment time and the plan complexity. The proposed algorithm is able to predict the ViewRay treatment delivery time with the average prediction error 0.22 min or 1.82%, and the maximal prediction error 0.89 min or 7.88%. The analysis has shown the correlation between the plan modulation (PM) factor and the total treatment delivery time, as well as the treatment delivery duty cycle. A possibility has been identified to significantly reduce MLC motion time by optimizing the positions of closed MLC pairs. The accuracy of the proposed prediction algorithm is sufficient to support patient treatment appointment scheduling. This developed software tool is currently applied in use on a daily basis in our clinic, and could also be used as an important indicator for treatment plan complexity. PACS number(s): 87.55.N PMID:27074472

Latent myostatin has significant activity and this activity is controlled more efficiently by WFIKKN1 than by WFIKKN2

PubMed Central

Szláma, György; Trexler, Mária; Patthy, László

2013-01-01

Myostatin, a negative regulator of skeletal muscle growth, is produced from myostatin precursor by multiple steps of proteolytic processing. After cleavage by a furin-type protease, the propeptide and growth factor domains remain associated, forming a noncovalent complex, the latent myostatin complex. Mature myostatin is liberated from latent myostatin by bone morphogenetic protein 1/tolloid proteases. Here, we show that, in reporter assays, latent myostatin preparations have significant myostatin activity, as the noncovalent complex dissociates at an appreciable rate, and both mature and semilatent myostatin (a complex in which the dimeric growth factor domain interacts with only one molecule of myostatin propeptide) bind to myostatin receptor. The interaction of myostatin receptor with semilatent myostatin is efficiently blocked by WAP, Kazal, immunoglobulin, Kunitz and NTR domain-containing protein 1 or growth and differentiation factor-associated serum protein 2 (WFIKKN1), a large extracellular multidomain protein that binds both mature myostatin and myostatin propeptide [Kondás et al. (2008) J Biol Chem 283, 23677–23684]. Interestingly, the paralogous protein WAP, Kazal, immunoglobulin, Kunitz and NTR domain-containing protein 2 or growth and differentiation factor-associated serum protein 1 (WFIKKN2) was less efficient than WFIKKN1 as an antagonist of the interactions of myostatin receptor with semilatent myostatin. Our studies have shown that this difference is attributable to the fact that only WFIKKN1 has affinity for the propeptide domain, and this interaction increases its potency in suppressing the receptor-binding activity of semilatent myostatin. As the interaction of WFIKKN1 with various forms of myostatin permits tighter control of myostatin activity until myostatin is liberated from latent myostatin by bone morphogenetic protein 1/tolloid proteases, WFIKKN1 may have greater potential as an antimyostatic agent than WFIKKN2. Structured digital abstract Furin cleaves Promyostatin by protease assay (View interaction) myostatin binds to PRO by surface plasmon resonance (View interaction) BMP-1 cleaves Promyostatin by protease assay (View interaction) ACR IIB physically interacts with Latent Myostatin by surface plasmon resonance (View interaction) Promyostatin and Promyostatin bind by comigration in gel electrophoresis (View interaction) WFIKKN1 binds to Latent Myostatin by pull down (View interaction) ACR IIB binds to Mature Myostatin by surface plasmon resonance (View Interaction: 1, 2, 3) WFIKKN1 binds to Myostatin Prodomain by surface plasmon resonance (View Interaction: 1, 2, 3) PMID:23829672

Culture in la clínica: Evaluating the utility of the Cultural Formulation Interview (CFI) in a Mexican outpatient setting.

PubMed

Ramírez Stege, Alyssa M; Yarris, Kristin Elizabeth

2017-08-01

While the classification of psychiatric disorders has been critiqued for failing to adequately account for culture, the inclusion of the Cultural Formulation Interview (CFI) in the DSM-5 has been viewed as a promising development for the inclusion of cultural factors in diagnosis and treatment of mental illness. In this study, we assess the appropriateness, acceptability, and clinical utility of the CFI among outpatients in a Mexican psychiatric hospital. Our assessment included observations of psychiatric residents' application of the CFI with 19 patients during routine outpatient visits, along with pre- and post-CFI interviews to determine providers' and patients' views of the CFI. The CFI was generally well received by providers and patients, viewed as a way of building trust and increasing providers' understanding of contextual factors influencing mental illness, such as social support. However, the CFI questions specifically related to "culture" were of limited effect and both patients and providers did not view them as useful. We discuss implications for the clinical assessment of cultural factors influencing mental health and illness and for the incorporation of the CFI in Mexican clinical settings.

Simulation and Correction of Triana-Viewed Earth Radiation Budget with ERBE/ISCCP Data

NASA Technical Reports Server (NTRS)

Huang, Jian-Ping; Minnis, Patrick; Doelling, David R.; Valero, Francisco P. J.

2002-01-01

This paper describes the simulation of the earth radiation budget (ERB) as viewed by Triana and the development of correction models for converting Trianaviewed radiances into a complete ERB. A full range of Triana views and global radiation fields are simulated using a combination of datasets from ERBE (Earth Radiation Budget Experiment) and ISCCP (International Satellite Cloud Climatology Project) and analyzed with a set of empirical correction factors specific to the Triana views. The results show that the accuracy of global correction factors to estimate ERB from Triana radiances is a function of the Triana position relative to the Lagrange-1 (L1) or the Sun location. Spectral analysis of the global correction factor indicates that both shortwave (SW; 0.2 - 5.0 microns) and longwave (LW; 5 -50 microns) parameters undergo seasonal and diurnal cycles that dominate the periodic fluctuations. The diurnal cycle, especially its amplitude, is also strongly dependent on the seasonal cycle. Based on these results, models are developed to correct the radiances for unviewed areas and anisotropic emission and reflection. A preliminary assessment indicates that these correction models can be applied to Triana radiances to produce the most accurate global ERB to date.

Factors influencing workplace violence risk among correctional health workers: insights from an Australian survey.

PubMed

Cashmore, Aaron W; Indig, Devon; Hampton, Stephen E; Hegney, Desley G; Jalaludin, Bin B

2016-11-01

Little is known about the environmental and organisational determinants of workplace violence in correctional health settings. This paper describes the views of health professionals working in these settings on the factors influencing workplace violence risk. All employees of a large correctional health service in New South Wales, Australia, were invited to complete an online survey. The survey included an open-ended question seeking the views of participants about the factors influencing workplace violence in correctional health settings. Responses to this question were analysed using qualitative thematic analysis. Participants identified several factors that they felt reduced the risk of violence in their workplace, including: appropriate workplace health and safety policies and procedures; professionalism among health staff; the presence of prison guards and the quality of security provided; and physical barriers within clinics. Conversely, participants perceived workplace violence risk to be increased by: low health staff-to-patient and correctional officer-to-patient ratios; high workloads; insufficient or underperforming security staff; and poor management of violence, especially horizontal violence. The views of these participants should inform efforts to prevent workplace violence among correctional health professionals.

Effect of field of view and monocular viewing on angular size judgements in an outdoor scene

NASA Technical Reports Server (NTRS)

Denz, E. A.; Palmer, E. A.; Ellis, S. R.

1980-01-01

Observers typically overestimate the angular size of distant objects. Significantly, overestimations are greater in outdoor settings than in aircraft visual-scene simulators. The effect of field of view and monocular and binocular viewing conditions on angular size estimation in an outdoor field was examined. Subjects adjusted the size of a variable triangle to match the angular size of a standard triangle set at three greater distances. Goggles were used to vary the field of view from 11.5 deg to 90 deg for both monocular and binocular viewing. In addition, an unrestricted monocular and binocular viewing condition was used. It is concluded that neither restricted fields of view similar to those present in visual simulators nor the restriction of monocular viewing causes a significant loss in depth perception in outdoor settings. Thus, neither factor should significantly affect the depth realism of visual simulators.

Rapid Analysis of Mass Distribution of Radiation Shielding

NASA Technical Reports Server (NTRS)

Zapp, Edward

2007-01-01

Radiation Shielding Evaluation Toolset (RADSET) is a computer program that rapidly calculates the spatial distribution of mass of an arbitrary structure for use in ray-tracing analysis of the radiation-shielding properties of the structure. RADSET was written to be used in conjunction with unmodified commercial computer-aided design (CAD) software that provides access to data on the structure and generates selected three-dimensional-appearing views of the structure. RADSET obtains raw geometric, material, and mass data on the structure from the CAD software. From these data, RADSET calculates the distribution(s) of the masses of specific materials about any user-specified point(s). The results of these mass-distribution calculations are imported back into the CAD computing environment, wherein the radiation-shielding calculations are performed.

Simulation study of a geometric shape factor technique for estimating earth-emitted radiant flux densities from wide-field-of-view radiation measurements

NASA Technical Reports Server (NTRS)

Weaver, W. L.; Green, R. N.

1980-01-01

Geometric shape factors were computed and applied to satellite simulated irradiance measurements to estimate Earth emitted flux densities for global and zonal scales and for areas smaller than the detector field of view (FOV). Wide field of view flat plate detectors were emphasized, but spherical detectors were also studied. The radiation field was modeled after data from the Nimbus 2 and 3 satellites. At a satellite altitude of 600 km, zonal estimates were in error 1.0 to 1.2 percent and global estimates were in error less than 0.2 percent. Estimates with unrestricted field of view (UFOV) detectors were about the same for Lambertian and limb darkening radiation models. The opposite was found for restricted field of view detectors. The UFOV detectors are found to be poor estimators of flux density from the total FOV and are shown to be much better as estimators of flux density from a circle centered at the FOV with an area significantly smaller than that for the total FOV.

Exploring How Second Grade Elementary Teachers Translate Their Nature of Science Views into Classroom Practice After a Graduate Level Nature of Science Course

NASA Astrophysics Data System (ADS)

Deniz, Hasan; Adibelli, Elif

2015-12-01

The main purpose of this study was to explore the factors mediating the translation of second grade teachers' nature of science (NOS) views into classroom practice after completing a graduate level NOS course. Four second grade in-service elementary teachers comprised the sample of this study. Data were collected from several sources during the course of this study. The primary data sources were (a) assessment of the elementary teachers' NOS views before and after the graduate level NOS course using the Views of Nature of Science Questionnaire Version B (VNOS-B) (Lederman et al., 2002) coupled with interviews, and (b) a classroom observation and videotaped recording of the elementary teachers' best NOS lessons coupled with interview. We identified three distinct but related factors that mediated the translation of NOS views into classroom practice: the teachers' perspectives about the developmental appropriateness of the NOS aspect, the teachers' selection of target NOS aspects, and the relative importance placed by teachers on each NOS aspect.

46 CFR 401.400 - Calculation of pilotage units and determination of weighting factor.

Code of Federal Regulations, 2010 CFR

2010-10-01

... weighting factor. 401.400 Section 401.400 Shipping COAST GUARD (GREAT LAKES PILOTAGE), DEPARTMENT OF... § 401.400 Calculation of pilotage units and determination of weighting factor. The equivalent pilotage... meters) Pilot Unit=(Length×Breadth×Depth)/10,000 (measured in feet) (b) Weighting factor table: Range of...

NECAP 4.1: NASA's Energy Cost Analysis Program thermal response factor routine

NASA Astrophysics Data System (ADS)

Weise, M. R.

1982-08-01

A thermal response factor is described and calculation sequences and flowcharts for RESFAC2 are provided. RESFAC is used by NASA's (NECAP) to calculate hourly heat transfer coefficients (thermal response factors) for each unique delayed surface. NECAP uses these response factors to compute each spaces' hourly heat gain/loss.

77 FR 77160 - Self-Regulatory Organizations; Chicago Mercantile Exchange Inc.; Notice of Filing of Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-31

... Liquidity Factor of CME's CDS Margin Methodology December 21, 2012. Pursuant to Section 19(b)(1) of the.... * * * * * CME CDS Liquidity Margin Factor Calculation Methodology The Liquidity Factor will be calculated as the... Liquidity Factor using the current Gross Notional Function with the following modifications: (1) the...

A Cross-National Study of Student Teachers' Views about Intelligence: Similarities and Differences in England and Turkey

ERIC Educational Resources Information Center

Ilhan-Beyaztas, Dilek; Dawson, Elizabeth

2017-01-01

A cross-national descriptive research method was used to explore Turkish and English student teachers' views about intelligence, and the factors which shape them. The "Adult Version of The Implicit Theory of Intelligence Scale" [1], and the Turkish version of this scale [2] were used to investigate the views of 114 English and 201…

Calculation of astrophysical S-factor and reaction rate in 12C(p, γ)13N reaction

NASA Astrophysics Data System (ADS)

Moghadasi, A.; Sadeghi, H.; Pourimani, R.

2018-02-01

The 12C(p, γ)13N reaction is the first process in the CNO cycle. Also it is a source of low-energy solar neutrinos in various neutrino experiments. Therefore, it is of high interest to gain data of the astrophysical S-factor in low energies. By applying Faddeev's method, we calculated wave functions for the bound state of 13N. Then the cross sections for resonance and non-resonance were calculated through using Breit-Wigner and direct capture cross section formulae, respectively. After that, we calculated the total S-factor and compared it with previous experimental data, revealing a good agreement altogether. Then, we extrapolated the S-factor in zero energy and the result was 1.32 ± 0.19 (keV.b). In the end, we calculated reaction rate and compared it with NACRE data.

Association of Television Viewing Time with Body Composition and Calcified Subclinical Atherosclerosis in Singapore Chinese

PubMed Central

Nang, Ei Ei Khaing; van Dam, Rob M.; Tan, Chuen Seng; Mueller-Riemenschneider, Falk; Lim, Yi Ting; Ong, Kai Zhi; Ee, Siqing; Lee, Jeannette; Tai, E. Shyong

2015-01-01

Objective Sedentary behavior such as television viewing may be an independent risk factor for coronary heart disease. However, few studies have assessed the impact of television viewing time on coronary artery calcification and it remains unclear how body fat contributes to this relationship. The aim of this study is to evaluate the association between television viewing time and subclinical atherosclerosis and whether effects on visceral or subcutaneous fat may mediate any associations observed. Methods This was a cross-sectional study of 398 Chinese participants (192 men and 206 women) from Singapore prospective study. Participants were free from known cardiovascular diseases and underwent interview, health screening, computed tomography scans of coronary arteries and abdomen. Spearman’s correlation was used to test the correlation between television viewing time, physical activity, body composition and abdominal fat distribution. The association between television viewing time and subclinical atherosclerosis was assessed by multiple logistic regression analysis. Results In men, television viewing time was significantly correlated with higher body fat mass index, percent body fat, subcutaneous and visceral fat. These associations were in the same direction, but weaker and not statistically significant in women. Television viewing time (hours/day) was associated with subclinical atherosclerosis in men (odds ratio: 1.41, 95% CI: 1.03-1.93) but no significant association was observed in women (odds ratio: 0.88, 95% CI: 0.59-1.31) after adjusting for potential socio-demographic and lifestyle confounders. Further adjustments for biological factors did not affect these associations. Conclusions Television viewing time was associated with greater adiposity and higher subcutaneous and visceral fat in men. TV viewing time was also associated with subclinical atherosclerosis in men and the potential mechanisms underlying this association require further investigation. PMID:26132754

The calculated effect of various hydrodynamic and aerodynamic factors on the take-off of a large flying boat

NASA Technical Reports Server (NTRS)

Olson, R E; Allison, J M

1940-01-01

Report presents the results of an investigation made to determine the influence of various factors on the take-off performance of a hypothetical large flying boat by means of take-off calculations. The factors varied in the calculations were size of hull (load coefficient), wing setting, trim, deflection of flap, wing loading, aspect ratio, and parasite drag. The take-off times and distances were calculated to the stalling speeds and the performance above these speeds was separately studied to determine piloting technique for optimum take-off.

Calculated hydroxyl A2 sigma --> X2 pi (0, 0) band emission rate factors applicable to atmospheric spectroscopy

NASA Technical Reports Server (NTRS)

Cageao, R. P.; Ha, Y. L.; Jiang, Y.; Morgan, M. F.; Yung, Y. L.; Sander, S. P.

1997-01-01

A calculation of the A2 sigma --> X2 pi (0, 0) band emission rate factors and line center absorption cross sections of OH applicable to its measurement using solar resonant fluorescence in the terrestrial atmosphere is presented in this paper. The most accurate available line parameters have been used. Special consideration has been given to the solar input flux because of its highly structured Fraunhofer spectrum. The calculation for the OH atmospheric emission rate factor in the solar resonant fluorescent case is described in detail with examples and intermediate results. Results of this calculation of OH emission rate factors for individual rotational lines are on average 30% lower than the values obtained in an earlier work.

Free iterative-complement-interaction calculations of the hydrogen molecule

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurokawa, Yusaku; Nakashima, Hiroyuki; Nakatsuji, Hiroshi

2005-12-15

The free iterative-complement-interaction (ICI) method based on the scaled Schroedinger equation proposed previously has been applied to the calculations of very accurate wave functions of the hydrogen molecule in an analytical expansion form. All the variables were determined with the variational principle by calculating the necessary integrals analytically. The initial wave function and the scaling function were changes to see the effects on the convergence speed of the ICI calculations. The free ICI wave functions that were generated automatically were different from the existing wave functions, and this difference was shown to be physically important. The best wave function reportedmore » in this paper seems to be the best worldwide in the literature from the variational point of view. The quality of the wave function was examined by calculating the nuclear and electron cusps.« less

Engineering Good: How Engineering Metaphors Help us to Understand the Moral Life and Change Society

PubMed Central

2009-01-01

Engineering can learn from ethics, but ethics can also learn from engineering. In this paper, I discuss what engineering metaphors can teach us about practical philosophy. Using metaphors such as calculation, performance, and open source, I articulate two opposing views of morality and politics: one that relies on images related to engineering as science and one that draws on images of engineering practice. I argue that the latter view and its metaphors provide a more adequate way to understand and guide the moral life. Responding to two problems of alienation and taking into account developments such as Fab Lab I then further explore the implications of this view for engineering and society. PMID:19722107

Product of the SNPP VIIRS SD Screen Transmittance and the SD BRDF (RSB) From Both Yaw Maneuver and Regular On-Orbit Data

NASA Technical Reports Server (NTRS)

Lei, Ning; Xiong, Xiaoxiong

2016-01-01

To assure data quality, the Earth-observing Visible Infrared Imaging Radiometer Suite (VIIRS) regularly performs on-orbit radiometric calibrations of its 22 spectral bands. The primary calibration radiance source for the reflective solar bands (RSBs) is a sunlit solar diffuser (SD). During the calibration process, sunlight goes through a perforated plate (the SD screen) and then strikes the SD. The SD scattered sunlight is used for the calibration, with the spectral radiance proportional to the product of the SD screen transmittance and the SD bidirectional reflectance distribution function (BRDF). The BRDF is decomposed to the product of its value at launch and a numerical factor quantifying its change since launch. Therefore, the RSB calibration requires accurate knowledge of the product of the SD screen transmittance and the BRDF (RSB; launch time). Previously, we calculated the product with yaw maneuver data and found that the product had improved accuracy over the prelaunch one. With both yaw maneuver and regular on orbit data, we were able to improve the accuracy of the SDSM screen transmittance and the product for the solar diffuser stability monitor SD view. In this study, we use both yaw maneuver and a small portion of regular on-orbit data to determine the product for the RSB SD view.

Angular radiation temperature simulation for time-dependent capsule drive prediction in inertial confinement fusion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jing, Longfei; Yang, Dong; Li, Hang

2015-02-15

The x-ray drive on a capsule in an inertial confinement fusion setup is crucial for ignition. Unfortunately, a direct measurement has not been possible so far. We propose an angular radiation temperature simulation to predict the time-dependent drive on the capsule. A simple model, based on the view-factor method for the simulation of the radiation temperature, is presented and compared with the experimental data obtained using the OMEGA laser facility and the simulation results acquired with VISRAD code. We found a good agreement between the time-dependent measurements and the simulation results obtained using this model. The validated model was thenmore » used to analyze the experimental results from the Shenguang-III prototype laser facility. More specifically, the variations of the peak radiation temperatures at different view angles with the albedo of the hohlraum, the motion of the laser spots, the closure of the laser entrance holes, and the deviation of the laser power were investigated. Furthermore, the time-dependent radiation temperature at different orientations and the drive history on the capsule were calculated. The results indicate that the radiation temperature from “U20W112” (named according to the diagnostic hole ID on the target chamber) can be used to approximately predict the drive temperature on the capsule. In addition, the influence of the capsule on the peak radiation temperature is also presented.« less

Vestibular and Non-vestibular Contributions to Eye Movements that Compensate for Head Rotations during Viewing of Near Targets

NASA Technical Reports Server (NTRS)

Han, Yanning H.; Kumar, Arun N.; Reschke, Millard F.; Somers, Jeffrey T.; Dell'Osso, Louis F.; Leigh, R. John

2004-01-01

We studied horizontal eye movements induced by en-bloc yaw rotation, over a frequency range 0.2 - 2.8 Hz, in 10 normal human subjects as th ey monocularly viewed a target located at their near point of focus. We measured gain and phase relationships between eye-in-head velocity and head velocity when the near target was either earth-fixed or head-fixed. During viewing of the earth-fixed near target,median gain was 1.49 (range 1.24 - 1.87) at 0.2 Hz for the group of subjects, but decl ined at higher frequencies, so that at 2.8 Hz median gain was 1.08 (r ange 0.68 - 1.67). During viewing of the head-fixed near target, median gain was 0.03 (range 0.01 - 0.10) at 0.2 Hz for the group of subjec ts, but increased at higher frequencies, so that at 2.8 Hz median gai n was 0.71 (range 0.28 - 0.94). We estimated the vestibular contribution to these responses (vestibulo-ocular reflex gain, Gvor) by applyin g transient head perturbations (peak acceleration> 1,000 deg's(exp 2) ) during sinusoidal rotation under the two viewing conditions. Median Gvor, estimated < 70m after the onset of head perturbation, was 0.98 (range 0.39 - 1.42) while viewing the earth-fixed near target, and 0. 97 (range 0.37 - 1.33) while viewing the head-fixed near target. For the group of subjects, 9 out of 10 subjects showed no sigificant diff erence of Gvor between the two viewing conditions ( p > 0.053 ) at all test frequencies. Since Gvor accounted for only approximately 73% of the overall response gain during viewing of the earth-fixed target, we investigated the relative contributions of non-vestibular factors. When subjects viewed the earth-fixed target under strobe illumination , to eliminate retinal image slip information, the gain of compensato ry eye movements declined compared with viewing in ambient room light . During sum-of-sine head rotations, while viewing the earth-fixed target, to minimize contributions from predictive mechanisms, gain also declined Nonetheless, simple superposition of smooth-pursuit tracking of sinusoidal target motion could not fully account for the overall r esponse at higher frequencies, suggesting other non-vestibular contributions. During binocular viewing conditions when vergence angle was s ignificantly greater than monocular viewing (p < 0.001), this gain of compensatory eye movements did not show proportional change; indeed, gain could not be correlated with vergence angle during monocular or binocular viewing. We conclude that several separate factors contribute to generate eye rotations during sinusoidal yaw head rotations whi le viewing a near target; these include the VOR, visual-tracking eye movements that utilize retinal image motion, predictive eye movements and, possibly, other unidentified nonvestibular factors. For these experiments, vergence was not an important determinant of response gain .

Sexual self-schemas of female child sexual abuse survivors: relationships with risky sexual behavior and sexual assault in adolescence.

PubMed

Niehaus, Ashley F; Jackson, Joan; Davies, Stephanie

2010-12-01

Childhood sexual trauma has been demonstrated to increase survivors' risk for engaging in unrestricted sexual behaviors and experiencing adolescent sexual assault. The current study used the sexual self-schema construct to examine cognitive representations of sexuality that might drive these behavioral patterns. In Study 1 (N = 774), we attempted to improve the content validity of the Sexual Self Schema Scale for child sexual abuse (CSA) survivors, introducing a fourth sexual self-schema factor titled the "immoral/irresponsible" factor. In Study 2 (N = 1150), the potential differences in sexual self-views, as assessed by the four sexual self-schema factors, between CSA survivors and non-victims were explored. In addition, Study 2 evaluated how these sexual self-schema differences may contribute to participation in unrestricted sexual behaviors and risk for sexual assault in adolescence. Results indicated that a history of CSA impacted the way women viewed themselves as a sexual person on each of the four factors. CSA survivors were found to view themselves as more open and possessing more immoral/irresponsible cognitions about sexuality as compared to women who did not have a CSA history. In addition, the CSA survivors endorsed less embarrassment and passionate/romantic views of their sexual selves. The interaction of CSA severity and the sexual self-schemas explained variance in adolescent sexual assault experiences above and beyond the severity of CSA history and participation in risky sexual behaviors. The findings suggest that sexual self-views may serve to moderate the relationship between CSA and adolescent sexual assault. Implications of these findings and directions for future research are discussed.

Genetics Home Reference: tumor necrosis factor receptor-associated periodic syndrome

MedlinePlus

... Email Facebook Twitter Home Health Conditions TRAPS Tumor necrosis factor receptor-associated periodic syndrome Printable PDF Open ... to view the expand/collapse boxes. Description Tumor necrosis factor receptor-associated periodic syndrome (commonly known as ...

Zone plate method for electronic holographic display using resolution redistribution technique.

PubMed

Takaki, Yasuhiro; Nakamura, Junya

2011-07-18

The resolution redistribution (RR) technique can increase the horizontal viewing-zone angle and screen size of electronic holographic display. The present study developed a zone plate method that would reduce hologram calculation time for the RR technique. This method enables calculation of an image displayed on a spatial light modulator by performing additions of the zone plates, while the previous calculation method required performing the Fourier transform twice. The derivation and modeling of the zone plate are shown. In addition, the look-up table approach was introduced for further reduction in computation time. Experimental verification using a holographic display module based on the RR technique is presented.

[Formal sample size calculation and its limited validity in animal studies of medical basic research].

PubMed

Mayer, B; Muche, R

2013-01-01

Animal studies are highly relevant for basic medical research, although their usage is discussed controversially in public. Thus, an optimal sample size for these projects should be aimed at from a biometrical point of view. Statistical sample size calculation is usually the appropriate methodology in planning medical research projects. However, required information is often not valid or only available during the course of an animal experiment. This article critically discusses the validity of formal sample size calculation for animal studies. Within the discussion, some requirements are formulated to fundamentally regulate the process of sample size determination for animal experiments.

Autostereoscopic display based on two-layer lenticular lenses.

PubMed

Zhao, Wu-Xiang; Wang, Qiong-Hua; Wang, Ai-Hong; Li, Da-Hai

2010-12-15

An autostereoscopic display based on two-layer lenticular lenses is proposed. The two-layer lenticular lenses include one-layer conventional lenticular lenses and additional one-layer concentrating-light lenticular lenses. Two prototypes of the proposed and conventional autostereoscopic displays are developed. At the optimum three-dimensional view distance, the luminance distribution of the prototypes along the horizontal direction is measured. By calculating the luminance distribution, the crosstalk of the prototypes is obtained. Compared with the conventional autostereoscopic display, the proposed autostereoscopic display has less crosstalk, a wider view angle, and higher efficiency of light utilization.

An analytic approach to resolving problems in medical ethics.

PubMed Central

Candee, D; Puka, B

1984-01-01

Education in ethics among practising professionals should provide a systematic procedure for resolving moral problems. A method for such decision-making is outlined using the two classical orientations in moral philosophy, teleology and deontology. Teleological views such as utilitarianism resolve moral dilemmas by calculating the excess of good over harm expected to be produced by each feasible alternative for action. The deontological view focuses on rights, duties, and principles of justice. Both methods are used to resolve the 1971 Johns Hopkins case of a baby born with Down's syndrome and duodenal atresia. PMID:6234395

The calculation of aircraft collision probabilities

DOT National Transportation Integrated Search

1971-10-01

The basic limitation of, air traffic compression, from the safety point of view, is the increased risk of collision due to reduced separations. In order to evolve new procedures, and eventually a fully, automatic system, it is desirable to have a mea...

Ionization Potentials for Isoelectronic Series.

ERIC Educational Resources Information Center

Agmon, Noam

1988-01-01

Presents a quantitative treatment of ionization potentials of isoelectronic atoms. By looking at the single-electron view of calculating the total energy of an atom, trends in the screening and effective quantum number parameters are examined. Approaches the question of determining electron affinities. (CW)

Predicting patriarchy: using individual and contextual factors to examine patriarchal endorsement in communities.

PubMed

Crittenden, Courtney A; Wright, Emily M

2013-04-01

In much feminist literature, patriarchy has often been studied as a predictive variable for attitudes toward or acts of violence against women. However, rarely has patriarchy been examined as an outcome across studies. The current study works toward filling this gap by examining several individual-and neighborhood-level factors that might influence patriarchy. Specifically, this research seeks to determine if neighborhood-level attributes related to socioeconomic status, family composition, and demographic information affect patriarchal views after individual-level correlates of patriarchy were controlled. Findings suggest that factors at both the individual- and neighborhood levels, particularly familial characteristics and dynamics, do influence the endorsement of patriarchal views.

An Investigation of the Factors Motivating Meaningful Learning of Statistics by Graduate Systems Management Students at AFIT.

DTIC Science & Technology

1987-09-01

DAC-RiB 271 AN INVESTIGATION OF THE FACTORS MOTIVATING MEANINGFUL v’ LEARNING OF STATIST (U) AIR FORCE INST OF TECH WRIGHT-PATTERSON RFB OH SCHOOL OF...Furthermore, the views expressed in the document are those of the author and do not necessarily reflect the views of the School of Systems and...MEANINGFUL LEARNING OF STATISTICS BY GRADUATE SYSTEMS MANAGEMENT STUDENTS AT AFIT THESIS Presented to the Faculty of the School of Systems and Logistics

Compensating the aberrations of actual optical systems by means of a nonaxisymmetric retouching of the surface.

NASA Astrophysics Data System (ADS)

Gan, M. A.; Ustinov, S. I.; Starkov, A. A.

1993-08-01

A theory, methods, and software are developed for the automated calculation of the retouching profile in order to compensate axisymmetric and nonaxisymmetric aberrations that are caused by errors in the fabrication of high-resolution optical systems. The retouching profile is calculated on the basis of interferograms recorded within the field of view of the objective. The software makes it possible to estimate the effectiveness of the retouching on the basis of optophysical image-quality criteria.

A satellite technique for quantitatively mapping rainfall rates over the oceans

NASA Technical Reports Server (NTRS)

Wilheit, T. T.; Roa, M. S. V.; Chang, T. C.; Rodgers, E. B.; Theon, J. S.

1975-01-01

A theoretical model for calculating microwave radiative transfer in raining atmospheres is developed. These calculations are compared with microwave brightness temperatures at a wavelength of 1.55 cm measured on the Nimbus-5 satellite and rain rates derived from WSR-57 meteorological radar measurements. A specially designed ground based verification experiment was also performed wherein upward viewing microwave brightness temperature measurements at wavelengths of 1.55 cm and 0.81 cm were compared with directly measured rain rates.

Unique magnetic and thermoelectric properties of chemically functionalized narrow carbon polymers.

PubMed

Zberecki, K; Wierzbicki, M; Swirkowicz, R; Barnaś, J

2017-02-01

We analyze magnetic, transport and thermoelectric properties of narrow carbon polymers, which are chemically functionalized with nitroxide groups. Numerical calculations of the electronic band structure and the corresponding transmission function are based on density functional theory. Transport and thermoelectric parameters are calculated in the linear response regime, with particular interest in charge and spin thermopowers (charge and spin Seebeck effects). Such nanoribbons are shown to have thermoelectric properties described by large thermoelectric efficiency, which makes these materials promising from the application point of view.

Jitter Controller Software

NASA Technical Reports Server (NTRS)

Lansdowne, Chatwin; Schlensinger, Adam

2011-01-01

Sinusoidal jitter is produced by simply modulating a clock frequency sinusoidally with a given frequency and amplitude. But this can be expressed as phase jitter, frequency jitter, or cycle-to-cycle jitter, rms or peak, absolute units, or normalized to the base clock frequency. Jitter using other waveforms requires calculating and downloading these waveforms to an arbitrary waveform generator, and helping the user manage relationships among phase jitter crest factor, frequency jitter crest factor, and cycle-to-cycle jitter (CCJ) crest factor. Software was developed for managing these relationships, automatically configuring the generator, and saving test results documentation. Tighter management of clock jitter and jitter sensitivity is required by new codes that further extend the already high performance of space communication links, completely correcting symbol error rates higher than 10 percent, and therefore typically requiring demodulation and symbol synchronization hardware to operating at signal-to-noise ratios of less than one. To accomplish this, greater demands are also made on transmitter performance, and measurement techniques are needed to confirm performance. It was discovered early that sinusoidal jitter can be stepped on a grid such that one can connect points by constant phase jitter, constant frequency jitter, or constant cycle-cycle jitter. The tool automates adherence to a grid while also allowing adjustments off-grid. Also, the jitter can be set by the user on any dimension and the others are calculated. The calculations are all recorded, allowing the data to be rapidly plotted or re-plotted against different interpretations just by changing pointers to columns. A key advantage is taking data on a carefully controlled grid, which allowed a single data set to be post-analyzed many different ways. Another innovation was building a software tool to provide very tight coupling between the generator and the recorded data product, and the operator's worksheet. Together, these allowed the operator to sweep the jitter stimulus quickly along any of three dimensions and focus on the response of the system under test (response was jitter transfer ratio, or performance degradation to the symbol or codeword error rate). Additionally, managing multi-tone and noise waveforms automated a tedious manual process, and provided almost instantaneous decision- making control over test flow. The code was written in LabVIEW, and calls Agilent instrument drivers to write to the generator hardware.

Degradation nonuniformity in the solar diffuser bidirectional reflectance distribution function.

PubMed

Sun, Junqiang; Chu, Mike; Wang, Menghua

2016-08-01

The assumption of angular dependence stability of the solar diffuser (SD) throughout degradation is critical to the on-orbit calibration of the reflective solar bands (RSBs) in many satellite sensors. Recent evidence has pointed to the contrary, and in this work, we present a thorough investigative effort into the angular dependence of the SD degradation for the Visible Infrared Imaging Radiometer Suite (VIIRS) onboard the Suomi National Polar-orbiting Partnership (SNPP) satellite and for the twin Moderate-resolution Imaging Spectroradiometer (MODIS) onboard Terra and Aqua spacecrafts. One common key step in the RSB calibration is the use of the SD degradation performance measured by an accompanying solar diffuser stability monitor (SDSM) as a valid substitute for the SD degradation factor in the direction of the RSB view. If SD degradations between these two respective directions do not maintain the same relative relationship over time, then the unmitigated use of the SDSM-measured SD degradation factor in the RSB calibration calculation will generate bias, and consequently, long-term drift in derived science products. We exploit the available history of the on-orbit calibration events to examine the response of the SDSM and the RSB detectors to the incident illumination reflecting off SD versus solar declination angle and show that the angular dependency, particularly at short wavelengths, evolves with respect to time. The generalized and the decisive conclusion is that the bidirectional reflectance distribution function (BRDF) of the SD degrades nonuniformly with respect to both incident and outgoing directions. Thus, the SDSM-based measurements provide SD degradation factors that are biased relative to the RSB view direction with respect to the SD. The analysis also reveals additional interesting phenomena, for example, the sharp behavioral change in the evolving angular dependence observed in Terra MODIS and SNPP VIIRS. For SNPP VIIRS the mitigation for this "SD degradation nonuniformity effect" with respect to angles relies on a "hybrid methodology" using lunar-based calibration to set the reliable long-term baseline. For MODIS, the use of earth targets in the major release Collection 6 to improve calibration coefficients and time-dependent response-versus-scan-angle characterization inherently averts the use of SD and its associated issues. The work further supports that having an open-close operational capability for the space view door can minimize SD degradation and its associated effects due to solar exposure, and thus provide long-term benefits for maintaining calibration and science data accuracy.

Visualization of small scale structures on high resolution DEMs

NASA Astrophysics Data System (ADS)

Kokalj, Žiga; Zakšek, Klemen; Pehani, Peter; Čotar, Klemen; Oštir, Krištof

2015-04-01

Knowledge on the terrain morphology is very important for observation of numerous processes and events and digital elevation models are therefore one of the most important datasets in geographic analyses. Furthermore, recognition of natural and anthropogenic microrelief structures, which can be observed on detailed terrain models derived from aerial laser scanning (lidar) or structure-from-motion photogrammetry, is of paramount importance in many applications. In this paper we thus examine and evaluate methods of raster lidar data visualization for the determination (recognition) of microrelief features and present a series of strategies to assist selecting the preferred visualization of choice for structures of various shapes and sizes, set in varied landscapes. Often the answer is not definite and more frequently a combination of techniques has to be used to map a very diverse landscape. Researchers can only very recently benefit from free software for calculation of advanced visualization techniques. These tools are often difficult to understand, have numerous options that confuse the user, or require and produce non-standard data formats, because they were written for specific purposes. We therefore designed the Relief Visualization Toolbox (RVT) as a free, easy-to-use, standalone application to create visualisations from high-resolution digital elevation data. It is tailored for the very beginners in relief interpretation, but it can also be used by more advanced users in data processing and geographic information systems. It offers a range of techniques, such as simple hillshading and its derivatives, slope gradient, trend removal, positive and negative openness, sky-view factor, and anisotropic sky-view factor. All included methods have been proven to be effective for detection of small scale features and the default settings are optimised to accomplish this task. However, the usability of the tool goes beyond computation for visualization purposes, as sky-view factor, for example, is an essential variable in many fields, e.g. in meteorology. RVT produces two types of results: 1) the original files have a full range of values and are intended for further analyses in geographic information systems, 2) the simplified versions are histogram stretched for visualization purposes and saved as 8-bit GeoTIFF files. This means that they can be explored in non-GIS software, e.g. with simple picture viewers, which is essential when a larger community of non-specialists needs to be considered, e.g. in public collaborative projects. The tool recognizes all frequently used single band raster formats and supports elevation raster file data conversion.

Attachment and social support in the prediction of psychopathology among young adults with and without a history of physical maltreatment.

PubMed

McLewin, Lise A; Muller, Robert T

2006-02-01

The purpose of this study was to examine the roles that social support and attachment play with regard to psychopathology among young adults with and without a history of physical maltreatment. Attachment was conceptualized in terms of the dimensions of view of self and view of other. Attachment and social support were examined individually and concurrently as protective factors. The sample consisted of 956 young adults, 294 of whom had a history of physical abuse. Individuals filled out a series of questionnaires inquiring about current attachment, social support, and psychopathology symptoms. A regression design was used, examining how well attachment and/or social support predicted current psychopathology. Results indicated that attachment security, particularly when characterized by a positive view of self, strongly predicted lower levels of psychopathology, irrespective of abuse status. Notably, view of self was a substantially larger predictor than was view of other or social support for individuals with and without a history of physical maltreatment. Among maltreatment subtypes, psychological abuse emerged as the largest predictor of psychopathology. The current study suggests that the attachment dimension of view of self is fundamental in predicting current psychopathology level, irrespective of abuse history. In addition, the subtype of psychological abuse deserves further investigation as a risk factor.

Dynamic Factor Analysis of Nonstationary Multivariate Time Series.

ERIC Educational Resources Information Center

Molenaar, Peter C. M.; And Others

1992-01-01

The dynamic factor model proposed by P. C. Molenaar (1985) is exhibited, and a dynamic nonstationary factor model (DNFM) is constructed with latent factor series that have time-varying mean functions. The use of a DNFM is illustrated using data from a television viewing habits study. (SLD)

Secondary School Students' Views of Inhibiting Factors in Seeking Counselling

ERIC Educational Resources Information Center

Chan, Stephanie; Quinn, Philip

2012-01-01

This study examines secondary school students' perceptions of inhibiting factors in seeking counselling. Responses to a questionnaire completed by 1346 secondary school students were analysed using quantitative and qualitative methods. Exploratory factor analysis highlighted that within 21 pre-defined inhibiting factors, items loaded strongly on…

Magnifying Smartphone Screen Using Google Glass for Low-Vision Users.

PubMed

Pundlik, Shrinivas; HuaQi Yi; Rui Liu; Peli, Eli; Gang Luo

2017-01-01

Magnification is a key accessibility feature used by low-vision smartphone users. However, small screen size can lead to loss of context and make interaction with magnified displays challenging. We hypothesize that controlling the viewport with head motion can be natural and help in gaining access to magnified displays. We implement this idea using a Google Glass that displays the magnified smartphone screenshots received in real time via Bluetooth. Instead of navigating with touch gestures on the magnified smartphone display, the users can view different screen locations by rotating their head, and remotely interacting with the smartphone. It is equivalent to looking at a large virtual image through a head contingent viewing port, in this case, the Glass display with ~ 15 ° field of view. The system can transfer seven screenshots per second at 8 × magnification, sufficient for tasks where the display content does not change rapidly. A pilot evaluation of this approach was conducted with eight normally sighted and four visually impaired subjects performing assigned tasks using calculator and music player apps. Results showed that performance in the calculation task was faster with the Glass than with the phone's built-in screen zoom. We conclude that head contingent scanning control can be beneficial in navigating magnified small smartphone displays, at least for tasks involving familiar content layout.

Determination of Radiative Forcing of Saharan Dust using Combined TOMS and ERBE Data

NASA Technical Reports Server (NTRS)

Hsu, N. Christina; Herman, Jay R.; Weaver, Clark

1999-01-01

The direct radiative forcing of Saharan dust aerosols has been determined by combining aerosol information derived from Nimbus-7 TOMS with radiation measurements observed at the top of atmosphere (TOA) by NOAA-9 ERBE made during February-July 1985. Cloud parameters and precipitable water derived from the NOAA-9 HIRS2 instrument were used to aid in screening for clouds and water vapor in the analyses. Our results indicate that under "cloud-free" and "dry" conditions there is a good correlation between the ERBE TOA outgoing longwave fluxes and the TOMS aerosol index measurements over both land and ocean in areas under the influence of airborne Saharan dust. The ERBE TOA outgoing shortwave fluxes were also found to correlate well with the dust loading derived from TOMS over ocean. However, the calculated shortwave forcing of Saharan dust aerosols is very weak and noisy over land for the range of solar zenith angle viewed by the NOAA-9 ERBE in 1985. Sensitivity factors of the TOA outgoing fluxes to changes in aerosol index were estimated using a linear regression fit to the ERBE and TOMS measurements. The ratio of the shortwave-to-longwave response to changes in dust loading over the ocean is found to be roughly 2 to 3, but opposite in sign. The monthly averaged "clear-sky" TOA direct forcing of airborne Saharan dust was also calculated by multiplying these sensitivity factors by the TOMS monthly averaged "clear-sky" aerosol index. Both the observational and theoretical analyses indicate that the dust layer height, ambient moisture content as well as the presence of cloud all play an important role in determining the TOA direct radiative forcing due to mineral aerosols.

Parenting and Preschooler TV Viewing in Low-Income Mexican Americans: Development of the Parenting Practices Regarding TV Viewing (PPRTV) Scale.

PubMed

Thompson, Darcy A; Johnson, Susan L; Vandewater, Elizabeth A; Schmiege, Sarah J; Boles, Richard E; Lev, Jerusha; Tschann, Jeanne M

2016-01-01

To develop and test a comprehensive, culturally based measure of parenting practices regarding television (TV) viewing in low-income Mexican-American mothers of preschoolers. Low-income Mexican-American female primary caregivers of preschoolers were recruited in urban safety-net pediatric clinics during the 2013 to 2014 academic year. Items on parenting practices regarding TV viewing were developed from a prior scale, review of the literature, and results from semistructured interviews. Items were administered by phone, and analyses included evaluation of the factor structure and psychometric properties of a 40-item measure of parenting practices regarding TV viewing (PPRTV). Using exploratory factor analysis, a 7-factor model emerged as the best fit for the data representing the following domains of parenting practices: time restriction, behavioral control, instructive practices, coviewing, planful restriction, reactive content restriction, and commercial endorsement. Internal reliabilities were acceptable (Cronbach's alpha >.75). Correlations among the resulting subscales were small to moderate (rs = 0.01-0.43). Subscales were correlated with child TV viewing amounts: time restriction (-0.14, p < .05); behavioral control (0.27, p < .001); coviewing (0.16, p < .01); planful restriction (-0.20, p < .001); and commercial endorsement (0.11, p < .05), which provides support for construct validity. The PPRTV scale measures 7 domains of parenting practices and has good initial reliability and validity. It allows investigators to conduct more in-depth evaluations of the role parents play in socializing young children on TV use. Results of such work will be important to informing the design of interventions aiming to ensure healthy screen media habits in young children.

Delayed antibiotic prescription for upper respiratory tract infections in children under primary care: Physicians' views.

PubMed

Raft, Camilla Flintholm; Bjerrum, Lars; Arpi, Magnus; Jarløv, Jens Otto; Jensen, Jette Nygaard

2017-12-01

Overprescribing antibiotics for common or inaccurately diagnosed childhood infections is a frequent problem in primary healthcare in most countries. Delayed antibiotic prescriptions have been shown to reduce the use of antibiotics in primary healthcare. The aim was to examine primary care physicians' views on delayed antibiotic prescriptions to preschool children with symptoms of upper respiratory tract infections (URTIs). A questionnaire was sent to 1180 physicians working in general practice in the Capital Region of Denmark, between January and March 2015. The questions focused on physicians' attitude and use of delayed antibiotic prescriptions to children with URTIs. The response rate was 49% (n = 574). Seven per cent of the physicians often used delayed prescriptions to children with symptoms of URTI, but 46% believed that delayed prescription could reduce antibiotic use. The physicians' views on delayed antibiotic prescription were significantly associated with their number of years working in general practice. Parents' willingness to wait-and-see, need for reassurance, and knowledge about antibiotics influenced the physicians' views. Also, clinical symptoms and signs, parents' willingness to shoulder the responsibility, the capability of observation without antibiotic treatment, and structural factors like out-of-hour services were relevant factors in the decision. Most physicians, especially those with fewer years of practice, had a positive attitude towards delayed antibiotic prescription. Several factors influence the views of the physicians-from perceptions of parents to larger structural elements and years of experience.

Derivation of Sky-View Factors from LIDAR Data

NASA Technical Reports Server (NTRS)

Kidd, Christopher; Chapman, Lee

2013-01-01

The use of Lidar (Light Detection and Ranging), an active light-emitting instrument, is becoming increasingly common for a range of potential applications. Its ability to provide fine resolution spatial and vertical resolution elevation data makes it ideal for a wide range of studies. This paper demonstrates the capability of Lidar data to measure sky view factors (SVF). The Lidar data is used to generate a spatial map of SVFs which are then compared against photographically-derived SVF at selected point locations. At each location three near-surface elevations measurements were taken and compared with collocated Lidar-derived estimated. It was found that there was generally good agreement between the two methodologies, although with decreasing SVF the Lidar-derived technique tended to overestimate the SVF: this can be attributed in part to the spatial resolution of the Lidar sampling. Nevertheless, airborne Lidar systems can map sky view factors over a large area easily, improving the utility of such data in atmospheric and meteorological models.

Compensation method for the influence of angle of view on animal temperature measurement using thermal imaging camera combined with depth image.

PubMed

Jiao, Leizi; Dong, Daming; Zhao, Xiande; Han, Pengcheng

2016-12-01

In the study, we proposed an animal surface temperature measurement method based on Kinect sensor and infrared thermal imager to facilitate the screening of animals with febrile diseases. Due to random motion and small surface temperature variation of animals, the influence of the angle of view on temperature measurement is significant. The method proposed in the present study could compensate the temperature measurement error caused by the angle of view. Firstly, we analyzed the relationship between measured temperature and angle of view and established the mathematical model for compensating the influence of the angle of view with the correlation coefficient above 0.99. Secondly, the fusion method of depth and infrared thermal images was established for synchronous image capture with Kinect sensor and infrared thermal imager and the angle of view of each pixel was calculated. According to experimental results, without compensation treatment, the temperature image measured in the angle of view of 74° to 76° showed the difference of more than 2°C compared with that measured in the angle of view of 0°. However, after compensation treatment, the temperature difference range was only 0.03-1.2°C. This method is applicable for real-time compensation of errors caused by the angle of view during the temperature measurement process with the infrared thermal imager. Copyright © 2016 Elsevier Ltd. All rights reserved.

Detector-specific correction factors in radiosurgery beams and their impact on dose distribution calculations.

PubMed

García-Garduño, Olivia A; Rodríguez-Ávila, Manuel A; Lárraga-Gutiérrez, José M

2018-01-01

Silicon-diode-based detectors are commonly used for the dosimetry of small radiotherapy beams due to their relatively small volumes and high sensitivity to ionizing radiation. Nevertheless, silicon-diode-based detectors tend to over-respond in small fields because of their high density relative to water. For that reason, detector-specific beam correction factors ([Formula: see text]) have been recommended not only to correct the total scatter factors but also to correct the tissue maximum and off-axis ratios. However, the application of [Formula: see text] to in-depth and off-axis locations has not been studied. The goal of this work is to address the impact of the correction factors on the calculated dose distribution in static non-conventional photon beams (specifically, in stereotactic radiosurgery with circular collimators). To achieve this goal, the total scatter factors, tissue maximum, and off-axis ratios were measured with a stereotactic field diode for 4.0-, 10.0-, and 20.0-mm circular collimators. The irradiation was performed with a Novalis® linear accelerator using a 6-MV photon beam. The detector-specific correction factors were calculated and applied to the experimental dosimetry data for in-depth and off-axis locations. The corrected and uncorrected dosimetry data were used to commission a treatment planning system for radiosurgery planning. Various plans were calculated with simulated lesions using the uncorrected and corrected dosimetry. The resulting dose calculations were compared using the gamma index test with several criteria. The results of this work presented important conclusions for the use of detector-specific beam correction factors ([Formula: see text] in a treatment planning system. The use of [Formula: see text] for total scatter factors has an important impact on monitor unit calculation. On the contrary, the use of [Formula: see text] for tissue-maximum and off-axis ratios has not an important impact on the dose distribution calculation by the treatment planning system. This conclusion is only valid for the combination of treatment planning system, detector, and correction factors used in this work; however, this technique can be applied to other treatment planning systems, detectors, and correction factors.

77 FR 69850 - Medicare Program; Medicare Part B Monthly Actuarial Rates, Premium Rate, and Annual Deductible...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-21

... percent reserve has been the normal target used to calculate the Part B premium. In view of the strong... 0938-AR16 Medicare Program; Medicare Part B Monthly Actuarial Rates, Premium Rate, and Annual...

Analytical Tools Interface for Landscape Assessments (ATtILA) for landscape metrics

EPA Pesticide Factsheets

ATtILA is easy to use ArcView extension that calculates many commonly used landscape metrics. By providing an intuitive interface, the extension provides the ability to generate landscape metrics to a wide audience regardless of their GIS knowledge level.

Factors affecting volume calculation with single photon emission tomography (SPECT) method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, T.H.; Lee, K.H.; Chen, D.C.P.

1985-05-01

Several factors may influence the calculation of absolute volumes (VL) from SPECT images. The effect of these factors must be established to optimize the technique. The authors investigated the following on the VL calculations: % of background (BG) subtraction, reconstruction filters, sample activity, angular sampling and edge detection methods. Transaxial images of a liver-trunk phantom filled with Tc-99m from 1 to 3 ..mu..Ci/cc were obtained in 64x64 matrix with a Siemens Rota Camera and MDS computer. Different reconstruction filters including Hanning 20,32, 64 and Butterworth 20, 32 were used. Angular samplings were performed in 3 and 6 degree increments. ROI'smore » were drawn manually and with an automatic edge detection program around the image after BG subtraction. VL's were calculated by multiplying the number of pixels within the ROI by the slice thickness and the x- and y- calibrations of each pixel. One or 2 pixel per slice thickness was applied in the calculation. An inverse correlation was found between the calculated VL and the % of BG subtraction (r=0.99 for 1,2,3 ..mu..Ci/cc activity). Based on the authors' linear regression analysis, the correct liver VL was measured with about 53% BG subtraction. The reconstruction filters, slice thickness and angular sampling had only minor effects on the calculated phantom volumes. Detection of the ROI automatically by the computer was not as accurate as the manual method. The authors conclude that the % of BG subtraction appears to be the most important factor affecting the VL calculation. With good quality control and appropriate reconstruction factors, correct VL calculations can be achieved with SPECT.« less

[Urodynamics foundations: contractile potency and urethral doppler].

PubMed

Benítez Navío, Julio; Caballero Gómez, Pilar; Delgado Elipe, Ildefonso

2002-12-01

To calculate the bladder softening factor, elastic constant and contractile potency. For the analysis we considered bladder behavior like that of a spring. See articles 1 and 2 published in this issue. Using flowmetry, Doppler ultrasound and abdominal pressure (Transrectal pressure register catheter) an analytical solution that permits calculation of factors defining bladder behavior was looked for. Doppler ultrasound allows us to know urine velocity through the prostatic urethra and, therefore, to calculate bladder contractile potency. Equations are solved reaching an analytical solution that allows calculating those factors that define bladder behavior: Bladder contractile potency, detrusor elastic constant, considering it behaves like a spring, and calculation of muscle resistance to movement. All thanks to Doppler ultrasound that allows to know urine speed. The bladder voiding phase is defined with the aforementioned factors; storage phase behavior can be indirectly inferred. Only uroflowmetry curves, Doppler ultrasound and abdominal pressure value are used. We comply with the so called non invasive urodynamics although for us it is just another phase in the biomechanical study of the detrusor muscle. Main conclusion is the addition of Doppler ultrasound to the urodynamist armamentarium as an essential instrument for the comprehension of bladder dynamics and calculation of bladder behavior defining factors. It is not a change in the focus but in the methods, gaining knowledge and diminishing invasion.

Towards a dispersive determination of the pion transition form factor

NASA Astrophysics Data System (ADS)

Leupold, Stefan; Hoferichter, Martin; Kubis, Bastian; Niecknig, Franz; Schneider, Sebastian P.

2018-01-01

We start with a brief motivation why the pion transition form factor is interesting and, in particular, how it is related to the high-precision standard-model calculation of the gyromagnetic ratio of the muon. Then we report on the current status of our ongoing project to calculate the pion transition form factor using dispersion theory. Finally we present and discuss a wish list of experimental data that would help to improve the input for our calculations and/or to cross-check our results.

Cognitive Abilities as Expressions of Three "Ways of Knowing."

ERIC Educational Resources Information Center

Diamond, Stephen R.; Royce, Joseph R.

1980-01-01

Factor analytic studies suggest that there are six replicable second order cognitive factors. These six factors lend themselves to being interpreted as aspects of Royce's three ways of knowing: conceptual, perceptual, or symbolical. This view provides a unified explanation of the second and third order factors. (Author/CTM)

Calculation of intrinsic stresses in the diamond-like coatings produced by plasma ion deposition in modes of DC and pulse bias potentials

NASA Astrophysics Data System (ADS)

Kalinichenko, A. A.; Perepelkin, S. S.; Strel'nitskij, V. E.

2015-04-01

The formula derivation for calculation of intrinsic stress in diamond-like coatings deposited from the ion flux in modes of continuous and pulsed potentials in view of process of defects formation is given. The criterion of applicability of obtained formula allowing to determine critical parameters of the pulsed potential mode is suggested. Results of calculation of stresses in diamond-like coatings at deposition of low-energy ions C+ from filtered vacuum arc plasma are adduced. The influence of the bias potential, repetition frequency and pulse duration, on the value of intrinsic stress is discussed. Qualitative agreement of calculated stress and experimental data is stated. The important role of deposition temperature in control of intrinsic stress in deposited coating is noted.

Effect of Bearing Housings on Centrifugal Pump Rotor Dynamics

NASA Astrophysics Data System (ADS)

Yashchenko, A. S.; Rudenko, A. A.; Simonovskiy, V. I.; Kozlov, O. M.

2017-08-01

The article deals with the effect of a bearing housing on rotor dynamics of a barrel casing centrifugal boiler feed pump rotor. The calculation of the rotor model including the bearing housing has been performed by the method of initial parameters. The calculation of a rotor solid model including the bearing housing has been performed by the finite element method. Results of both calculations highlight the need to add bearing housings into dynamic analyses of the pump rotor. The calculation performed by modern software packages is more a time-taking process, at the same time it is a preferred one due to a graphic editor that is employed for creating a numerical model. When it is necessary to view many variants of design parameters, programs for beam modeling should be used.

An exploratory study of differences in views of factors affecting sexual orientation for a sample of lesbians and gay men.

PubMed

Otis, Melanie D; Skinner, William F

2004-06-01

An exploratory study of lesbians (70) and gay men (118) from a rural state in the mid-South was conducted using a self-administered, mail-out survey. The nonrandom sample was drawn from organizational mailing lists, snowball sampling, and a convenience sample at a community event. Respondents were asked to indicate the extent to which each of the following affected sexual orientation: genetics, relationship between parents, relationship with parents, birth order, peers, growing up in a dysfunctional family, growing up in a single-parent family, negative experiences with the opposite sex, and positive experiences with the same sex. Similar to studies of heterosexual men and women, these gay men were more likely to view sexual orientation as a result of genetics than the lesbian respondents. Further, the lesbian group were more likely to view positive relationships with the same sex to have a great influence on sexual orientation. These data indicate there are sex differences in views on factors that affect sexual orientation.

Analysis of Crosstalk in 3D Circularly Polarized LCDs Depending on the Vertical Viewing Location.

PubMed

Zeng, Menglin; Nguyen, Truong Q

2016-03-01

Crosstalk in circularly polarized (CP) liquid crystal display (LCD) with polarized glasses (passive 3D glasses) is mainly caused by two factors: 1) the polarizing system including wave retarders and 2) the vertical misalignment (VM) of light between the LC module and the patterned retarder. We show that the latter, which is highly dependent on the vertical viewing location, is a much more significant factor of crosstalk in CP LCD than the former. There are three contributions in this paper. Initially, a display model for CP LCD, which accurately characterizes VM, is proposed. A novel display calibration method for the VM characterization that only requires pictures of the screen taken at four viewing locations. In addition, we prove that the VM-based crosstalk cannot be efficiently reduced by either preprocessing the input images or optimizing the polarizing system. Furthermore, we derive the analytic solution for the viewing zone, where the entire screen does not have the VM-based crosstalk.

Novel Characterization of Capsule X-Ray Drive at the National Ignition Facility [Using ViewFactor Experiments to Measure Hohlraum X-Radiation Drive from the Capsule Point-of-View in Ignition Experiments on the National Ignition Facility

DOE PAGES

MacLaren, S. A.; Schneider, M. B.; Widmann, K.; ...

2014-03-13

Here, indirect drive experiments at the National Ignition Facility are designed to achieve fusion by imploding a fuel capsule with x rays from a laser-driven hohlraum. Previous experiments have been unable to determine whether a deficit in measured ablator implosion velocity relative to simulations is due to inadequate models of the hohlraum or ablator physics. ViewFactor experiments allow for the first time a direct measure of the x-ray drive from the capsule point of view. The experiments show a 15%–25% deficit relative to simulations and thus explain nearly all of the disagreement with the velocity data. In addition, the datamore » from this open geometry provide much greater constraints on a predictive model of laser-driven hohlraum performance than the nominal ignition target.« less

40 CFR Table Nn-1 to Subpart Hh of... - Default Factors for Calculation Methodology 1 of This Subpart

Code of Federal Regulations, 2011 CFR

2011-07-01

... Calculation Methodology 1 of This Subpart Fuel Default high heating value factor Default CO2 emission factor (kg CO2/MMBtu) Natural Gas 1.028 MMBtu/Mscf 53.02 Propane 3.822 MMBtu/bbl 61.46 Normal butane 4.242...

40 CFR Table Nn-1 to Subpart Hh of... - Default Factors for Calculation Methodology 1 of This Subpart

Code of Federal Regulations, 2013 CFR

2013-07-01

... Calculation Methodology 1 of This Subpart Fuel Default high heating value factor Default CO2 emission factor (kg CO2/MMBtu) Natural Gas 1.028 MMBtu/Mscf 53.02 Propane 3.822 MMBtu/bbl 61.46 Normal butane 4.242...

40 CFR Table Nn-1 to Subpart Hh of... - Default Factors for Calculation Methodology 1 of This Subpart

Code of Federal Regulations, 2012 CFR

2012-07-01

... Calculation Methodology 1 of This Subpart Fuel Default high heating value factor Default CO2 emission factor (kg CO2/MMBtu) Natural Gas 1.028 MMBtu/Mscf 53.02 Propane 3.822 MMBtu/bbl 61.46 Normal butane 4.242...

42 CFR 422.264 - Calculation of savings.

Code of Federal Regulations, 2010 CFR

2010-10-01

...), adjusted using the factors described in paragraph (c) of this section. (3) The risk adjusted MA region... the upcoming calendar year the risk adjustment factors described in paragraph (c)(1) or (c)(2) of this... of calculating savings for MA local plans CMS has the authority to apply risk adjustment factors that...

42 CFR 422.264 - Calculation of savings.

Code of Federal Regulations, 2011 CFR

2011-10-01

...), adjusted using the factors described in paragraph (c) of this section. (3) The risk adjusted MA region... the upcoming calendar year the risk adjustment factors described in paragraph (c)(1) or (c)(2) of this... of calculating savings for MA local plans CMS has the authority to apply risk adjustment factors that...

40 CFR 98.253 - Calculating GHG emissions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (metric tons/year). 0.98 = Assumed combustion efficiency of a flare. 0.001 = Unit conversion factor... measurement values within the day to calculate a daily average. MVC = Molar volume conversion factor (849.5....001 = Unit conversion factor (metric tons per kilogram, mt/kg). n = Number of measurement periods. The...

Temporal properties of the myopic response to defocus in the guinea pig.

PubMed

Leotta, Amelia J; Bowrey, Hannah E; Zeng, Guang; McFadden, Sally A

2013-05-01

Hyperopic defocus induces myopia in all species tested and is believed to underlie the progression of human myopia. We determined the temporal properties of the effects of hyperopic defocus in a mammalian eye. In Experiment 1, the rise and decay time of the responses elicited by hyperopic defocus were calculated in 111 guinea pigs by giving repeated episodes of monocular -4 D lens wear (from 5 to 6 days of age for 12 days) interspersed with various dark intervals. In Experiment 2, the decay time constant was calculated in 152 guinea pigs when repeated periods of monocular -5 D lens-wear (from 4 days of age for 7 days) were interrupted with free viewing periods of different lengths. At the end of the lens-wear period, ocular parameters were measured and time constants were calculated relative to the maximum response induced by continuous lens wear. When hyperopic defocus was experienced with dark intervals between episodes, the time required to induce 50% of the maximum achievable myopia and ocular elongation was at most 30 min. Saturated 1 h episodes took at least 22 h for refractive error and 31 h for ocular length, to decay to 50% of the maximum response. However, the decay was an order of magnitude faster when hyperopic defocus episodes were interrupted with a daily free viewing period, with only 36 min required to reduce relative myopia and ocular elongation by 50%. Hyperopic defocus causes myopia with brief exposures and is very long lasting in the absence of competing signals. However, this myopic response rapidly decays if interrupted by periods of 'normal viewing' at least 30 min in length, wherein ocular growth appears to be guided preferentially by the least amount of hyperopic defocus experienced. Ophthalmic & Physiological Optics © 2013 The College of Optometrists.

Robust estimation of mammographic breast density: a patient-based approach

NASA Astrophysics Data System (ADS)

Heese, Harald S.; Erhard, Klaus; Gooßen, Andre; Bulow, Thomas

2012-02-01

Breast density has become an established risk indicator for developing breast cancer. Current clinical practice reflects this by grading mammograms patient-wise as entirely fat, scattered fibroglandular, heterogeneously dense, or extremely dense based on visual perception. Existing (semi-) automated methods work on a per-image basis and mimic clinical practice by calculating an area fraction of fibroglandular tissue (mammographic percent density). We suggest a method that follows clinical practice more strictly by segmenting the fibroglandular tissue portion directly from the joint data of all four available mammographic views (cranio-caudal and medio-lateral oblique, left and right), and by subsequently calculating a consistently patient-based mammographic percent density estimate. In particular, each mammographic view is first processed separately to determine a region of interest (ROI) for segmentation into fibroglandular and adipose tissue. ROI determination includes breast outline detection via edge-based methods, peripheral tissue suppression via geometric breast height modeling, and - for medio-lateral oblique views only - pectoral muscle outline detection based on optimizing a three-parameter analytic curve with respect to local appearance. Intensity harmonization based on separately acquired calibration data is performed with respect to compression height and tube voltage to facilitate joint segmentation of available mammographic views. A Gaussian mixture model (GMM) on the joint histogram data with a posteriori calibration guided plausibility correction is finally employed for tissue separation. The proposed method was tested on patient data from 82 subjects. Results show excellent correlation (r = 0.86) to radiologist's grading with deviations ranging between -28%, (q = 0.025) and +16%, (q = 0.975).

Mediating effects of dietary intake on associations of TV viewing, body mass index and metabolic syndrome in adolescents

PubMed Central

McNaughton, S. A.; Lacy, K. E.; Dunstan, D. W.; Carson, V.; Salmon, J.

2016-01-01

Summary Objective Evidence suggests that TV viewing is associated with body mass index (BMI) and metabolic syndrome (MetS) in adolescents. However, it is unclear whether dietary intake mediates these relationships. Methods A cross‐sectional analysis was conducted in adolescents (12–19 years) participating in the 2003–2006 United States National Health and Nutrition Examination Survey. BMI z scores (zBMI) (n = 3,161) and MetS (n = 1,379) were calculated using age‐ and sex‐specific criteria for adolescents. TV viewing (h/day) was measured via a self‐reported questionnaire, and dietary intake was assessed using two 24‐h recalls. Using the MacKinnon method, a series of mediation analyses were conducted examining five dietary mediators (total energy intake, fruit and vegetable intake, discretionary snacks, sugar‐sweetened beverages and diet quality) of the relationships between TV viewing and zBMI and MetS. Results Small positive relationships were observed between TV viewing and zBMI (β = 0.99, p < 0.001) and TV viewing and MetS (OR = 1.18, p = 0.046). No dietary element appeared to mediate the relationship between TV viewing and zBMI. However, sugar‐sweetened beverage consumption and fruit and vegetable intake partially mediated the relationship between TV viewing and MetS, explaining 8.7% and 4.1% of the relationship, respectively. Conclusions These findings highlight the complexity of the relationships between TV viewing, dietary intake and cardiometabolic health outcomes, and that TV viewing should remain a target for interventions. PMID:27708839

Mediating effects of dietary intake on associations of TV viewing, body mass index and metabolic syndrome in adolescents.

PubMed

Fletcher, E A; McNaughton, S A; Lacy, K E; Dunstan, D W; Carson, V; Salmon, J

2016-09-01

Evidence suggests that TV viewing is associated with body mass index (BMI) and metabolic syndrome (MetS) in adolescents. However, it is unclear whether dietary intake mediates these relationships. A cross-sectional analysis was conducted in adolescents (12-19 years) participating in the 2003-2006 United States National Health and Nutrition Examination Survey. BMI z scores (zBMI) ( n  = 3,161) and MetS ( n  = 1,379) were calculated using age- and sex-specific criteria for adolescents. TV viewing (h/day) was measured via a self-reported questionnaire, and dietary intake was assessed using two 24-h recalls. Using the MacKinnon method, a series of mediation analyses were conducted examining five dietary mediators (total energy intake, fruit and vegetable intake, discretionary snacks, sugar-sweetened beverages and diet quality) of the relationships between TV viewing and zBMI and MetS. Small positive relationships were observed between TV viewing and zBMI (β = 0.99, p  < 0.001) and TV viewing and MetS (OR = 1.18, p  = 0.046). No dietary element appeared to mediate the relationship between TV viewing and zBMI. However, sugar-sweetened beverage consumption and fruit and vegetable intake partially mediated the relationship between TV viewing and MetS, explaining 8.7% and 4.1% of the relationship, respectively. These findings highlight the complexity of the relationships between TV viewing, dietary intake and cardiometabolic health outcomes, and that TV viewing should remain a target for interventions.

Dynamic Magnification Factor in a Box-Shape Steel Girder

NASA Astrophysics Data System (ADS)

Rahbar-Ranji, A.

2014-01-01

The dynamic effect of moving loads on structures is treated as a dynamic magnification factor when resonant is not imminent. Studies have shown that the calculated magnification factors from field measurements could be higher than the values specified in design codes. It is the main aim of present paper to investigate the applicability and accuracy of a rule-based expression for calculation of dynamic magnification factor for lifting appliances used in marine industry. A steel box shape girder of a crane is considered and transient dynamic analysis using computer code ANSYS is implemented. Dynamic magnification factor is calculated for different loading conditions and compared with rule-based equation. The effects of lifting speeds, acceleration, damping ratio and position of cargo are examined. It is found that rule-based expression underestimate dynamic magnification factor.

Factors influencing the television viewing practices of Indian children.

PubMed

Ravikiran, S R; Baliga, B Shantharam; Jain, Animesh; Kotian, M Shashidhar

2014-02-01

To study the effect of socio-demographic factors, parental regulations and maternal television usage on the television viewing practices of Indian schoolchildren. Mothers of 6-12 y old children were interviewed using a pre-tested questionnaire at the pediatric outpatient. The television viewing practices of 405 schoolchildren with maternal television viewing and parental television rules were analyzed. Specific television viewing practices considered harmful in the present study were- viewing television >2 h, viewing television just prior to sleep (at bedtime), predominantly viewing general adult channels and using television as an aid to sleep. 35.8 % (n = 145) of the children viewed television for >2 h on schooldays. 20 % (n = 81) used television as sleep-aid. 28.1 % (n = 114) children had televisions in the room they slept. The frequency of parental television rules were with respect to: duration of viewing- 77.5 % (n = 314), timing of viewing- 63.7 % (n = 258), content- 35.6 % (n = 144). The children of families with the rule needing of parental permission to switch on the television [present in 34.8 % (n = 141) children] had lower harmful television viewing practices: duration of television viewing on schooldays >2 h (23.4 %, n = 33, P < 0.001); television viewed just before sleep (39 %, n = 55, P < 0.001); use of television as sleep-aid (12.1 %, n = 17, P = 0.003). 26.7 % (n = 108) of the mothers viewed television for >2 h. Linear regression analysis showed association between average television duration of children and average maternal television duration on schooldays (Beta = 0.246, t = 5.09, P < 0.001). Binary logistic regression analysis showed that harmful television viewing practices were significantly more in children with television in bedroom [OR = 7.49(4.19-13.38), P < 0.001]. It was reduced significantly by the parental rules on content viewed [OR = 0.41(0.23-0.72), P = 0.002]; need of permission to switch on television [OR = 0.31(0.18-0.53), P < 0.001] and a higher maternal education [OR = 0.29 (0.14-0.59), P = 0.001]. Lower maternal education, increased maternal television usage, presence of television in bedroom resulted in harmful television viewing practices among Indian children. The parental rules that were effective in countering these were the rule on content viewed and needing parental permission to switch on television.

Theoretical studies of surface enhanced hyper-Raman spectroscopy: The chemical enhancement mechanism

NASA Astrophysics Data System (ADS)

Valley, Nicholas; Jensen, Lasse; Autschbach, Jochen; Schatz, George C.

2010-08-01

Hyper-Raman spectra for pyridine and pyridine on the surface of a tetrahedral 20 silver atom cluster are calculated using static hyperpolarizability derivatives obtained from time dependent density functional theory. The stability of the results with respect to choice of exchange-correlation functional and basis set is verified by comparison with experiment and with Raman spectra calculated for the same systems using the same methods. Calculated Raman spectra were found to match well with experiment and previous theoretical calculations. The calculated normal and surface enhanced hyper-Raman spectra closely match experimental results. The chemical enhancement factors for hyper-Raman are generally larger than for Raman (102-104 versus 101-102). Integrated hyper-Raman chemical enhancement factors are presented for a set of substituted pyridines. A two-state model is developed to predict these chemical enhancement factors and this was found to work well for the majority of the molecules considered, providing a rationalization for the difference between hyper-Raman and Raman enhancement factors.

47 CFR 73.35 - Calculation of improvement factors.

Code of Federal Regulations, 2014 CFR

2014-10-01

... for an allotment (See § 73.30) in the 1605-1705 kHz band filed by an existing fulltime AM station licensed in the 535-1605 kHz band will be ranked according to the station's calculated improvement factor... calculations excluding the subject station. The cumulative gain in the above service area is the numerator of...

47 CFR 73.35 - Calculation of improvement factors.

Code of Federal Regulations, 2013 CFR

2013-10-01

... for an allotment (See § 73.30) in the 1605-1705 kHz band filed by an existing fulltime AM station licensed in the 535-1605 kHz band will be ranked according to the station's calculated improvement factor... calculations excluding the subject station. The cumulative gain in the above service area is the numerator of...

47 CFR 73.35 - Calculation of improvement factors.

Code of Federal Regulations, 2011 CFR

2011-10-01

... for an allotment (See § 73.30) in the 1605-1705 kHz band filed by an existing fulltime AM station licensed in the 535-1605 kHz band will be ranked according to the station's calculated improvement factor... calculations excluding the subject station. The cumulative gain in the above service area is the numerator of...

47 CFR 73.35 - Calculation of improvement factors.

Code of Federal Regulations, 2010 CFR

2010-10-01

... for an allotment (See § 73.30) in the 1605-1705 kHz band filed by an existing fulltime AM station licensed in the 535-1605 kHz band will be ranked according to the station's calculated improvement factor... calculations excluding the subject station. The cumulative gain in the above service area is the numerator of...

47 CFR 73.35 - Calculation of improvement factors.

Code of Federal Regulations, 2012 CFR

2012-10-01

... for an allotment (See § 73.30) in the 1605-1705 kHz band filed by an existing fulltime AM station licensed in the 535-1605 kHz band will be ranked according to the station's calculated improvement factor... calculations excluding the subject station. The cumulative gain in the above service area is the numerator of...

Individual and social determinants of obesity in strategic health messages: Interaction with political ideology.

PubMed

Young, Rachel; Hinnant, Amanda; Leshner, Glenn

2016-07-01

Antiobesity health communication campaigns often target individual behavior, but these ads might inflate the role of individual responsibility at the expense of other health determinants. In a 2 × 2 full-factorial, randomized, online experiment, 162 American adults viewed antiobesity advertisements that varied in emphasizing social or individual causation for obesity through text and images. Locus for attribution of responsibility for obesity causes and solutions was measured, as was how these responses were moderated by political ideology. Participants who viewed text emphasizing individual responsibility were less likely to agree that genetic factors caused obesity. Conservative participants who viewed images of overweight individuals were less likely than liberal participants to agree that social factors were responsible for causing obesity. In addition, among conservative participants who viewed images of fast food versus images of overweight individuals, agreement that the food industry bore some responsibility mediated support for policy solutions to obesity. These findings, among others, demonstrate that awareness of multilevel determinants of health outcomes can be a precursor of support for policy solutions to obesity among those not politically inclined to support antiobesity policy. In addition, stigmatizing images of overweight individuals in antiobesity campaigns might overemphasize the role of individual behavior in obesity at the expense of other factors.

Organ-specific SPECT activity calibration using 3D printed phantoms for molecular radiotherapy dosimetry.

PubMed

Robinson, Andrew P; Tipping, Jill; Cullen, David M; Hamilton, David; Brown, Richard; Flynn, Alex; Oldfield, Christopher; Page, Emma; Price, Emlyn; Smith, Andrew; Snee, Richard

2016-12-01

Patient-specific absorbed dose calculations for molecular radiotherapy require accurate activity quantification. This is commonly derived from Single-Photon Emission Computed Tomography (SPECT) imaging using a calibration factor relating detected counts to known activity in a phantom insert. A series of phantom inserts, based on the mathematical models underlying many clinical dosimetry calculations, have been produced using 3D printing techniques. SPECT/CT data for the phantom inserts has been used to calculate new organ-specific calibration factors for (99m) Tc and (177)Lu. The measured calibration factors are compared to predicted values from calculations using a Gaussian kernel. Measured SPECT calibration factors for 3D printed organs display a clear dependence on organ shape for (99m) Tc and (177)Lu. The observed variation in calibration factor is reproduced using Gaussian kernel-based calculation over two orders of magnitude change in insert volume for (99m) Tc and (177)Lu. These new organ-specific calibration factors show a 24, 11 and 8 % reduction in absorbed dose for the liver, spleen and kidneys, respectively. Non-spherical calibration factors from 3D printed phantom inserts can significantly improve the accuracy of whole organ activity quantification for molecular radiotherapy, providing a crucial step towards individualised activity quantification and patient-specific dosimetry. 3D printed inserts are found to provide a cost effective and efficient way for clinical centres to access more realistic phantom data.

Success Factors of E-Learning Projects: A Technical Perspective

ERIC Educational Resources Information Center

Alhomod, Sami; Shafi, Mohd Mudasir

2013-01-01

The aim of this study is to identify the success factors of e learning programs in King Saud University from an engineer and technician's point of view. An extensive study of existing literature was done to determine the 11 success factors of e learning program. The factors identified as success factors are: Sufficient Users Training,…

Staff views on wellbeing for themselves and for service users.

PubMed

Schrank, Beate; Brownell, Tamsin; Riches, Simon; Chevalier, Agnes; Jakaite, Zivile; Larkin, Charley; Lawrence, Vanessa; Slade, Mike

2015-02-01

Wellbeing is an important outcome in the context of recovery from mental illness. The views of mental health professionals on wellbeing may influence their approach to supporting recovery. This study aims to explore views held by mental health staff about factors influencing their own wellbeing and that of service users with psychosis. Semi-structured interviews were conducted with 14 mental health staff in South London who had worked with people with psychosis. Thematic analysis was used to analyse the data and comparisons were made between staff views of wellbeing for themselves and service users. Staff participants held similar conceptualisations of wellbeing for themselves and for service users. However, they suggested a differential impact on wellbeing for a number of factors, such as balance, goals and achievement, and work. Staff employed a more deficit-based perspective on wellbeing for service users and a more strengths-based view for themselves. Staff stated a recovery orientation in principle, but struggled to focus on service user strengths in practice. A stronger emphasis in clinical practice on amplifying strengths to foster self-management is indicated, and staff may need support to achieve this emphasis, e.g. through specific interventions and involvement of peer support workers.

Comparison of CFD-calculations of centrifugal compressor stages by NUMECA Fine Turbo and ANSYS CFX programs

NASA Astrophysics Data System (ADS)

Galerkin, Y. B.; Voinov, I. B.; Drozdov, A. A.

2017-08-01

Computational Fluid Dynamics (CFD) methods are widely used for centrifugal compressors design and flow analysis. The calculation results are dependent on the chosen software, turbulence models and solver settings. Two of the most widely applicable programs are NUMECA Fine Turbo and ANSYS CFX. The objects of the study were two different stages. CFD-calculations were made for a single blade channel and for full 360-degree flow paths. Stage 1 with 3D impeller and vaneless diffuser was tested experimentally. Its flow coefficient is 0.08 and loading factor is 0.74. For stage 1 calculations were performed with different grid quality, a different number of cells and different models of turbulence. The best results have demonstrated the Spalart-Allmaras model and mesh with 1.854 million cells. Stage 2 with return channel, vaneless diffuser and 3D impeller with flow coefficient 0.15 and loading factor 0.5 was designed by the known Universal Modeling Method. Its performances were calculated by the well identified Math model. Stage 2 performances by CFD calculations shift to higher flow rate in comparison with design performances. The same result was obtained for stage 1 in comparison with measured performances. Calculated loading factor is higher in both cases for a single blade channel. Loading factor performance calculated for full flow path (“360 degrees”) by ANSYS CFX is in satisfactory agreement with the stage 2 design performance. Maximum efficiency is predicted accurately by the ANSYS CFX “360 degrees” calculation. “Sector” calculation is less accurate. Further research is needed to solve the problem of performances mismatch.

The Ingenious Theory of Interstellar Trade

NASA Astrophysics Data System (ADS)

Radhakrishnan, Arun; Ganapathy, Rohan M.

This paper extends interplanetary trade theory to an interstellar setting. It is chiefly concerned with the following question: How should interest charges on goods in transit be computed when the goods travel at speeds close to the actual speed of light? This is a problem because the time taken in transit will appear less to an observer travelling with the goods than to a stationary observer. An innovative and ingenious solution is derived from the economic theory, and two useless but TRUE theorems are proved. The interstellar trade would happen in such a way that two time frames must be considered namely that of the stationary observer whose time runs faster compared to the time frame of the observer in transit The interest in a given trade is purely based on the time taken for the debtor to pay the amount, once the goods have been delivered by the seller. But, in case of interstellar trade, the interest to be calculated in between two time frames would lead to the question of which time frame to be considered and moreover, the time taken for the goods to reach the destination is signicantly prolonged compared to the interplanetary trade, which means, even the slightest variations in the interest rate would be magnied. Apart from this, various new factors arise while calculating the interest. The factors include the time value of money, and the risk of variation in demand for goods, the risk of interspace accidents causing loss of the goods and the rate of perish-ability in case of organic goods. The first two factors considered, for which the time frame of the stationary observer is considered and the factors such as the risk of accidents and the rate of perish-ability of the goods are considered based on the time frame of the observer in transit's point of view. The reasons for such considerations and various assumptions on these concepts are dealt in this paper. The theorems that are formulated in this paper would provide the interstellar traders a basic framework on the uniqueness of interstellar trading as opposed to the interplanetary trading. The paper would also tackle problems based on the computation of the perish-ability factor and the risk of variation in demand, as per special relativity. On the whole, a realistic approach based in the current trade policies and accounting standards is given, for a futurist trading spectrum.

Perceptions of Professional Counselors: Survey of College Student Views

ERIC Educational Resources Information Center

Wantz, Richard A.; Firmin, Michael

2011-01-01

Numerous sources of information influence how individuals perceive professional counselors. The stressors associated with entering college, developmental differences, and factors associated with service fees may further impact how college students view mental health professionals and may ultimately influence when, for what issues, and with whom…

STUDENTS' VIEWS OF THEIR COLLEGE ENVIRONMENT.

ERIC Educational Resources Information Center

STRICKER, GEORGE

AN INVESTIGATION OF ONE COLLEGE COMMUNITY WAS UNDERTAKEN, FOCUSING ON THE STUDENTS' VIEWS OF THE COLLEGE ENVIRONMENT, PERSONALITY NEEDS, AND ACADEMIC ACHIEVEMENT, AND ATTEMPTING TO LOCATE SOME ANTECEDENT AND CONCURRENT CORRELATES OF THESE FACTORS. THE TEST INSTRUMENTS USED WERE THE "ACTIVITIES INDEX" (AI) BY STERN AND THE "COLLEGE…

Understanding WCAG2.0 Colour Contrast Requirements Through 3D Colour Space Visualisation.

PubMed

Sandnes, Frode Eika

2016-01-01

Sufficient contrast between text and background is needed to achieve sufficient readability. WCAG2.0 provides a specific definition of sufficient contrast on the web. However, the definition is hard to understand and most designers thus use contrast calculators to validate their colour choices. Often, such checks are performed after design and this may be too late. This paper proposes a colour selection approach based on three-dimensional visualisation of the colour space. The complex non-linear relationships between the colour components become comprehendible when viewed in 3D. The method visualises the available colours in an intuitive manner and allows designers to check a colour against the set of other valid colours. Unlike the contrast calculators, the proposed method is proactive and fun to use. A colour space builder was developed and the resulting models were viewed with a point cloud viewer. The technique can be used as both a design tool and a pedagogical aid to teach colour theory and design.

Complexation of nicotinic acid with first generation poly(amidoamine) dendrimers: A microscopic view from density functional theory

NASA Astrophysics Data System (ADS)

Badalkhani-Khamseh, Farideh; Bahrami, Aidin; Ebrahim-Habibi, Azadeh; Hadipour, Nasser L.

2017-09-01

This study explains some electronic and structural parameters of niacin (NA) encapsulation into PAMAM-G1 dendrimer using DFT calculations. Optimized structural geometries, interaction energies, NMR, NBO, and AIM analyses, in accordance with experiment, revealed that the stability of G1@NA complex can be attributed to the five intermolecular hydrogen bonds formed between the functional groups of G1 and NA. Because of nearing to the experimental results, all the calculations repeated again using a self-consistent reaction field (SCRF) and the polarizable continuum model (PCM) to address the implicit solvent effects and the obtained results were in line with the calculations in gas phase.

DFT calculation of pKa’s for dimethoxypyrimidinylsalicylic based herbicides

NASA Astrophysics Data System (ADS)

Delgado, Eduardo J.

2009-03-01

Dimethoxypyrimidinylsalicylic derived compounds show potent herbicidal activity as a result of the inhibition of acetohydroxyacid synthase, the first common enzyme in the biosynthetic pathway of the branched-chain aminoacids (valine, leucine and isoleucine) in plants, bacteria and fungi. Despite its practical importance, this family of compounds have been poorly characterized from a physico-chemical point of view. Thus for instance, their pK a's have not been reported earlier neither experimentally nor theoretically. In this study, the acid-dissociation constants of 39 dimethoxypyrimidinylsalicylic derived herbicides are calculated by DFT methods at B3LYP/6-31G(d,p) level of theory. The calculated values are validated by two checking tests based on the Hammett equation.

Ahuna Mons: Side View

NASA Image and Video Library

2016-09-01

Ceres' lonely mountain, Ahuna Mons, is seen in this simulated perspective view. The elevation has been exaggerated by a factor of two. The view was made using enhanced-color images from NASA's Dawn mission. Images taken using blue (440 nanometers), green (750 nanometers) and infrared (960 nanometers) spectral filters were combined to create the view. The spacecraft's framing camera took the images from Dawn's low-altitude mapping orbit, from an altitude of 240 miles (385 kilometers) in August 2016. The resolution of the component images is 120 feet (35 meters) per pixel. http://photojournal.jpl.nasa.gov/catalog/PIA20915

Oxo Crater: Side View

NASA Image and Video Library

2016-09-01

Ceres' lonely mountain, Ahuna Mons, is seen in this simulated perspective view. The elevation has been exaggerated by a factor of two. The view was made using enhanced-color images from NASA's Dawn mission. Images taken using blue (440 nanometers), green (750 nanometers) and infrared (960 nanometers) spectral filters were combined to create the view. The spacecraft's framing camera took the images from Dawn's low-altitude mapping orbit, from an altitude of 240 miles (385 kilometers) in August 2016. The resolution of the component images is 120 feet (35 meters) per pixel. http://photojournal.jpl.nasa.gov/catalog/PIA20915

Results from a Web Impact Factor Crawler.

ERIC Educational Resources Information Center

Thelwall, Mike

2001-01-01

Discusses Web impact factors (WIFs), Web versions of the impact factors for journals, and how they can be calculated by using search engines. Highlights include HTML and document indexing; Web page links; a Web crawler designed for calculating WIFs; and WIFs for United Kingdom universities that measured research profiles or capability. (Author/LRW)

40 CFR 98.283 - Calculating GHG emissions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (metric tons CO2/metric ton of petroleum coke consumed). 0.65 = Adjustment factor for the amount of carbon... = Carbon content factor for petroleum coke consumed in month n from the supplier or as measured by the... = Petroleum coke consumption in month n (tons). EFCO2,n = CO2 emissions factor from month n (calculated in...

40 CFR 98.283 - Calculating GHG emissions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (metric tons CO2/metric ton of petroleum coke consumed). 0.65 = Adjustment factor for the amount of carbon... = Carbon content factor for petroleum coke consumed in month n from the supplier or as measured by the... = Petroleum coke consumption in month n (tons). EFCO2,n = CO2 emissions factor from month n (calculated in...

40 CFR 98.283 - Calculating GHG emissions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (metric tons CO2/metric ton of petroleum coke consumed). 0.65 = Adjustment factor for the amount of carbon... = Carbon content factor for petroleum coke consumed in month n from the supplier or as measured by the... = Petroleum coke consumption in month n (tons). EFCO2,n = CO2 emissions factor from month n (calculated in...

40 CFR 98.283 - Calculating GHG emissions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (metric tons CO2/metric ton of petroleum coke consumed). 0.65 = Adjustment factor for the amount of carbon... = Carbon content factor for petroleum coke consumed in month n from the supplier or as measured by the... = Petroleum coke consumption in month n (tons). EFCO2,n = CO2 emissions factor from month n (calculated in...

78 FR 25116 - Self-Regulatory Organizations; Chicago Mercantile Exchange Inc.; Notice of Filing of Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-29

... Liquidity Factor of CME's CDS Margin Methodology April 23, 2013. Pursuant to Section 19(b)(1) of the... additions; bracketed text indicates deletions. * * * * * CME CDS Liquidity Margin Factor Calculation Methodology The Liquidity Factor will be calculated as the sum of two components: (1) A concentration charge...

Uncertainty analysis of diffuse-gray radiation enclosure problems: A hypersensitive case study

NASA Technical Reports Server (NTRS)

Taylor, Robert P.; Luck, Rogelio; Hodge, B. K.; Steele, W. Glenn

1993-01-01

An uncertainty analysis of diffuse-gray enclosure problems is presented. The genesis was a diffuse-gray enclosure problem which proved to be hypersensitive to the specification of view factors. This genesis is discussed in some detail. The uncertainty analysis is presented for the general diffuse-gray enclosure problem and applied to the hypersensitive case study. It was found that the hypersensitivity could be greatly reduced by enforcing both closure and reciprocity for the view factors. The effects of uncertainties in the surface emissivities and temperatures are also investigated.

Leaf bidirectional reflectance and transmittance in corn and soybean

NASA Technical Reports Server (NTRS)

Walter-Shea, E. A.; Norman, J. M.; Blad, B. L.

1989-01-01

Bidirectional optical properties of leaves must be adequately characterized to develop comprehensive and reliably predictive canopy radiative-transfer models. Directional reflectance and transmittance factors of individual corn and soybean leaves were measured at source incidence angles (SIAs) 20, 45, and 70 deg and numerous view angles in the visible and NIR. Bidirectional reflectance distributions changed with increasing SIA, with forward scattering most pronounced at 70 deg. Directional-hemispherical reflectance generally increased and transmittance decreased with increased SIA. Directional-hemispherical reflectance factors were higher and transmittances were lower than the nadir-viewed reflectance component.

Quantitative wood–adhesive penetration with X-ray computed tomography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paris, Jesse L.; Kamke, Frederick A.

Micro X-ray computed tomography (XCT) was used to analyze the 3D adhesive penetration behavior of different wood–adhesive bondlines. Three adhesives, a phenol formaldehyde (PF), a polymeric diphenylmethane diisocyanate (pMDI), and a hybrid polyvinyl acetate (PVA), all tagged with iodine for enhanced X-ray attenuation, were used to prepare single-bondline laminates in two softwoods, Douglas-fir and loblolly pine, and one hardwood, a hybrid polar. Adhesive penetration depth was measured with two separate calculations, and results were compared with 2D fluorescent micrographs. A total of 54 XCT scans were collected, representing six replicates of each treatment type; each replicate, however, consisted of approximatelymore » 1500 individual, cross-section slices stacked along the specimen length. As these adhesives were highly modified, the presented results do not indicate typical behavior for their broader adhesive classes. Still, clear penetration differences were observed between each adhesive type, and between wood species bonded with both the PF and pMDI adhesives. Furthermore, penetration results depended on the calculation method used. Two adhesive types with noticeably different resin distributions in the cured bondline, showed relatively similar penetration depths when calculated with a traditional effective penetration equation. However, when the same data was calculated with a weighted penetration calculation, which accounts for both adhesive area and depth, the results appeared to better represent the different distributions depicted in the photomicrographs and tomograms. Additionally, individual replicate comparisons showed variation due to specimen anatomy, not easily observed or interpreted from 2D images. Finally, 3D views of segmented 3D adhesive phases offered unique, in-situ views of the cured adhesive structures. In particular, voids formed by CO 2 bubbles generated during pMDI cure were clearly visible in penetrated columns of the solidified adhesive.« less

Regional-scale calculation of the LS factor using parallel processing

NASA Astrophysics Data System (ADS)

Liu, Kai; Tang, Guoan; Jiang, Ling; Zhu, A.-Xing; Yang, Jianyi; Song, Xiaodong

2015-05-01

With the increase of data resolution and the increasing application of USLE over large areas, the existing serial implementation of algorithms for computing the LS factor is becoming a bottleneck. In this paper, a parallel processing model based on message passing interface (MPI) is presented for the calculation of the LS factor, so that massive datasets at a regional scale can be processed efficiently. The parallel model contains algorithms for calculating flow direction, flow accumulation, drainage network, slope, slope length and the LS factor. According to the existence of data dependence, the algorithms are divided into local algorithms and global algorithms. Parallel strategy are designed according to the algorithm characters including the decomposition method for maintaining the integrity of the results, optimized workflow for reducing the time taken for exporting the unnecessary intermediate data and a buffer-communication-computation strategy for improving the communication efficiency. Experiments on a multi-node system show that the proposed parallel model allows efficient calculation of the LS factor at a regional scale with a massive dataset.

Considerations of net present value in policy making regarding diagnostic and therapeutic technologies.

PubMed

Califf, Robert M; Rasiel, Emma B; Schulman, Kevin A

2008-11-01

The pharmaceutical and medical device industries function in a business environment in which shareholders expect companies to optimize profit within legal and ethical standards. A fundamental tool used to optimize decision making is the net present value calculation, which estimates the current value of cash flows relating to an investment. We examined 3 prototypical research investment decisions that have been the source of public scrutiny to illustrate how policy decisions can be better understood when their impact on societally desirable investments by industry are viewed from the standpoint of their impact on net present value. In the case of direct, comparative clinical trials, a simple net present value calculation provides insight into why companies eschew such investments. In the case of pediatric clinical trials, the Pediatric Extension Rule changed the net present value calculation from unattractive to potentially very attractive by allowing patent extensions; thus, the dramatic increase in pediatric clinical trials can be explained by the financial return on investment. In the case of products for small markets, the fixed costs of development make this option financially unattractive. Policy decisions can be better understood when their impact on societally desirable investments by the pharmaceutical and medical device industries are viewed from the standpoint of their impact on net present value.

Panoramic Images Mapping Tools Integrated Within the ESRI ArcGIS Software

NASA Astrophysics Data System (ADS)

Guo, Jiao; Zhong, Ruofei; Zeng, Fanyang

2014-03-01

There is a general study on panoramic images which are presented along with appearance of the Google street map. Despite 360 degree viewing of street, we can realize more applications over panoramic images. This paper developed a toolkits plugged in ArcGIS, which can view panoramic photographs at street level directly from ArcMap and measure and capture all visible elements as frontages, trees and bridges. We use a series of panoramic images adjoined with absolute coordinate through GPS and IMU. There are two methods in this paper to measure object from these panoramic images: one is to intersect object position through a stereogram; the other one is multichip matching involved more than three images which all cover the object. While someone wants to measure objects from these panoramic images, each two panoramic images which both contain the object can be chosen to display on ArcMap. Then we calculate correlation coefficient of the two chosen panoramic images so as to calculate the coordinate of object. Our study test different patterns of panoramic pairs and compare the results of measurement to the real value of objects so as to offer the best choosing suggestion. The article has mainly elaborated the principles of calculating correlation coefficient and multichip matching.

Monte Carlo calculations of k{sub Q}, the beam quality conversion factor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muir, B. R.; Rogers, D. W. O.

2010-11-15

Purpose: To use EGSnrc Monte Carlo simulations to directly calculate beam quality conversion factors, k{sub Q}, for 32 cylindrical ionization chambers over a range of beam qualities and to quantify the effect of systematic uncertainties on Monte Carlo calculations of k{sub Q}. These factors are required to use the TG-51 or TRS-398 clinical dosimetry protocols for calibrating external radiotherapy beams. Methods: Ionization chambers are modeled either from blueprints or manufacturers' user's manuals. The dose-to-air in the chamber is calculated using the EGSnrc user-code egs{sub c}hamber using 11 different tabulated clinical photon spectra for the incident beams. The dose to amore » small volume of water is also calculated in the absence of the chamber at the midpoint of the chamber on its central axis. Using a simple equation, k{sub Q} is calculated from these quantities under the assumption that W/e is constant with energy and compared to TG-51 protocol and measured values. Results: Polynomial fits to the Monte Carlo calculated k{sub Q} factors as a function of beam quality expressed as %dd(10){sub x} and TPR{sub 10}{sup 20} are given for each ionization chamber. Differences are explained between Monte Carlo calculated values and values from the TG-51 protocol or calculated using the computer program used for TG-51 calculations. Systematic uncertainties in calculated k{sub Q} values are analyzed and amount to a maximum of one standard deviation uncertainty of 0.99% if one assumes that photon cross-section uncertainties are uncorrelated and 0.63% if they are assumed correlated. The largest components of the uncertainty are the constancy of W/e and the uncertainty in the cross-section for photons in water. Conclusions: It is now possible to calculate k{sub Q} directly using Monte Carlo simulations. Monte Carlo calculations for most ionization chambers give results which are comparable to TG-51 values. Discrepancies can be explained using individual Monte Carlo calculations of various correction factors which are more accurate than previously used values. For small ionization chambers with central electrodes composed of high-Z materials, the effect of the central electrode is much larger than that for the aluminum electrodes in Farmer chambers.« less

Determinants of Oregon hospice chaplains' views on physician-assisted suicide.

PubMed

Goy, Elizabeth R; Carlson, Bryant; Simopoulos, Nicole; Jackson, Ann; Ganzini, Linda

2006-01-01

Although religiousness is a strong predictor of attitudes towards physician-assisted suicide (PAS), Oregon hospice chaplains express wide variation in their opposition to or support for legalized PAS. We explored factors associated with chaplains' views on PAS. A mailed survey to chaplains from 51 Oregon hospices. Fifty of 77 eligible hospice chaplains (65%) returned surveys. Views on PAS were associated with views on suicide in general. Moral and theological beliefs were the most important influences on views on PAS. Chaplains who were opposed to PAS believed that God alone may take life, that life is an absolute good, and that suffering has a divine purpose. Those who supported PAS placed emphasis on the importance of self-determination and sanctity of life as defined by quality of life. Oregon hospice chaplains' diverse views towards PAS are closely related to their views on suicide in general, and their personal and theological beliefs.

Does a Therapist's World View Matter?

PubMed

Peteet, John R; Rodriguez, Vithya B; Herschkopf, Marta D; McCarthy, Alyssa; Betts, Jennifer; Romo, Stephanie; Michael Murphy, J

2016-06-01

While past research indicates that mental health professionals are less religious than the public they serve, little is known about the implications of therapists' world views for their practice. In this study, approximately 50 therapists completed surveys that assessed self-identification in relation to spirituality, religion, and/or world view; how relevant they considered their patients' and their own world views; and responses to clinical vignettes involving issues arising in treatment. While a minority considered themselves religious, a majority indicated that they considered themselves moderately or very spiritual. When asked how they would respond to a series of clinical vignettes involving topics such as assisted suicide and encouraging the use of spiritual resources, responses varied significantly by world view. Respondents endorsed several factors limiting the integration of religion/spiritualities/world views into their clinical work. These data raise questions about how to further explore the clinical relevance of the therapist's world view.

Program calculates Z-factor for natural gas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coker, A.K.

The Fortran program called Physic presented in this article calculates the gas deviation or compressibility factor, Z, of natural gas. The author has used the program for determining discharge-piping pressure drop. The calculated Z is within 5% accuracy for natural hydrocarbon gas with a specific gravity between 0.5 and 0.8, and at a pressure below 5,000 psia.

Monte Carlo based electron treatment planning and cutout output factor calculations

NASA Astrophysics Data System (ADS)

Mitrou, Ellis

Electron radiotherapy (RT) offers a number of advantages over photons. The high surface dose, combined with a rapid dose fall-off beyond the target volume presents a net increase in tumor control probability and decreases the normal tissue complication for superficial tumors. Electron treatments are normally delivered clinically without previously calculated dose distributions due to the complexity of the electron transport involved and greater error in planning accuracy. This research uses Monte Carlo (MC) methods to model clinical electron beams in order to accurately calculate electron beam dose distributions in patients as well as calculate cutout output factors, reducing the need for a clinical measurement. The present work is incorporated into a research MC calculation system: McGill Monte Carlo Treatment Planning (MMCTP) system. Measurements of PDDs, profiles and output factors in addition to 2D GAFCHROMICRTM EBT2 film measurements in heterogeneous phantoms were obtained to commission the electron beam model. The use of MC for electron TP will provide more accurate treatments and yield greater knowledge of the electron dose distribution within the patient. The calculation of output factors could invoke a clinical time saving of up to 1 hour per patient.

Impact of the ozone monitoring instrument row anomaly on the long-term record of aerosol products

NASA Astrophysics Data System (ADS)

Torres, Omar; Bhartia, Pawan K.; Jethva, Hiren; Ahn, Changwoo

2018-05-01

Since about three years after the launch the Ozone Monitoring Instrument (OMI) on the EOS-Aura satellite, the sensor's viewing capability has been affected by what is believed to be an internal obstruction that has reduced OMI's spatial coverage. It currently affects about half of the instrument's 60 viewing positions. In this work we carry out an analysis to assess the effect of the reduced spatial coverage on the monthly average values of retrieved aerosol optical depth (AOD), single scattering albedo (SSA) and the UV Aerosol Index (UVAI) using the 2005-2007 three-year period prior to the onset of the row anomaly. Regional monthly average values calculated using viewing positions 1 through 30 were compared to similarly obtained values using positions 31 through 60, with the expectation of finding close agreement between the two calculations. As expected, mean monthly values of AOD and SSA obtained with these two scattering-angle dependent subsets of OMI observations agreed over regions where carbonaceous or sulphate aerosol particles are the predominant aerosol type. However, over arid regions, where desert dust is the main aerosol type, significant differences between the two sets of calculated regional mean values of AOD were observed. As it turned out, the difference in retrieved desert dust AOD between the scattering-angle dependent observation subsets was due to the incorrect representation of desert dust scattering phase function. A sensitivity analysis using radiative transfer calculations demonstrated that the source of the observed AOD bias was the spherical shape assumption of desert dust particles. A similar analysis in terms of UVAI yielded large differences in the monthly mean values for the two sets of calculations over cloudy regions. On the contrary, in arid regions with minimum cloud presence, the resulting UVAI monthly average values for the two sets of observations were in very close agreement. The discrepancy under cloudy conditions was found to be caused by the parameterization of clouds as opaque Lambertian reflectors. When properly accounting for cloud scattering effects using Mie theory, the observed UVAI angular bias was significantly reduced. The analysis discussed here has uncovered important algorithmic deficiencies associated with the model representation of the angular dependence of scattering effects of desert dust aerosols and cloud droplets. The resulting improvements in the handling of desert dust and cloud scattering have been incorporated in an improved version of the OMAERUV algorithm.

Determination of boron in uranium aluminum silicon alloy by spectrophotometry and estimation of expanded uncertainty in measurement

NASA Astrophysics Data System (ADS)

Ramanjaneyulu, P. S.; Sayi, Y. S.; Ramakumar, K. L.

2008-08-01

Quantification of boron in diverse materials of relevance in nuclear technology is essential in view of its high thermal neutron absorption cross section. A simple and sensitive method has been developed for the determination of boron in uranium-aluminum-silicon alloy, based on leaching of boron with 6 M HCl and H 2O 2, its selective separation by solvent extraction with 2-ethyl hexane 1,3-diol and quantification by spectrophotometry using curcumin. The method has been evaluated by standard addition method and validated by inductively coupled plasma-atomic emission spectroscopy. Relative standard deviation and absolute detection limit of the method are 3.0% (at 1 σ level) and 12 ng, respectively. All possible sources of uncertainties in the methodology have been individually assessed, following the International Organization for Standardization guidelines. The combined uncertainty is calculated employing uncertainty propagation formulae. The expanded uncertainty in the measurement at 95% confidence level (coverage factor 2) is 8.840%.

Magnetohydrodynamic dissipative flow across the slendering stretching sheet with temperature dependent variable viscosity

NASA Astrophysics Data System (ADS)

Jayachandra Babu, M.; Sandeep, N.; Ali, M. E.; Nuhait, Abdullah O.

The boundary layer flow across a slendering stretching sheet has gotten awesome consideration due to its inexhaustible pragmatic applications in nuclear reactor technology, acoustical components, chemical and manufacturing procedures, for example, polymer extrusion, and machine design. By keeping this in view, we analyzed the two-dimensional MHD flow across a slendering stretching sheet within the sight of variable viscosity and viscous dissipation. The sheet is thought to be convectively warmed. Convective boundary conditions through heat and mass are employed. Similarity transformations used to change over the administering nonlinear partial differential equations as a group of nonlinear ordinary differential equations. Runge-Kutta based shooting technique is utilized to solve the converted equations. Numerical estimations of the physical parameters involved in the problem are calculated for the friction factor, local Nusselt and Sherwood numbers. Viscosity variation parameter and chemical reaction parameter shows the opposite impact to each other on the concentration profile. Heat and mass transfer Biot numbers are helpful to enhance the temperature and concentration respectively.

Vapor-based interferometric measurement of local evaporation rate and interfacial temperature of evaporating droplets.

PubMed

Dehaeck, Sam; Rednikov, Alexey; Colinet, Pierre

2014-03-04

The local evaporation rate and interfacial temperature are two quintessential characteristics for the study of evaporating droplets. Here, it is shown how one can extract these quantities by measuring the vapor concentration field around the droplet with digital holographic interferometry. As a concrete example, an evaporating freely receding pending droplet of 3M Novec HFE-7000 is analyzed at ambient conditions. The measured vapor cloud is shown to deviate significantly from a pure-diffusion regime calculation, but it compares favorably to a new boundary-layer theory accounting for a buoyancy-induced convection in the gas and the influence upon it of a thermal Marangoni flow. By integration of the measured local evaporation rate over the interface, the global evaporation rate is obtained and validated by a side-view measurement of the droplet shape. Advective effects are found to boost the global evaporation rate by a factor of 4 as compared to the diffusion-limited theory.

Constraining parameters of the neutron star in the supernova remnant HESS J1731-347

NASA Astrophysics Data System (ADS)

Klochkov, D.; Suleimanov, V.; Puehlhofer, G.; Werner, K.; Santangelo, A.

2014-07-01

The Central Compact Object (CCO) in HESS J1731-347, presumably a neutron star, is one of the brightest sources in this class. Like other CCOs, it potentially provides an "undisturbed" view of thermal radiation generated at the neutron star surface. The shape and normalization of the corresponding X-ray spectrum depends on the emitting area, surface redshift, and gravity acceleration. Thus, its modeling under certain assumptions allows the mass and radius of the neutron star to be constrained. In our analysis, we model the spectrum of the CCO accumulated with XMM-Newton over ˜100 ksec exposure time in three observations. The exposure time has increased by a factor of five since our previous analysis of the source. For the spectral fitting, we use our hydrogen and carbon atmosphere models calculated assuming hydrostatic and radiative equilibria and taking into account pressure ionization and the presence of spectral lines (in case of carbon). We present the resulting constraints on the mass, radius, distance, and temperature of the neutron star.

Bias correction factors for near-Earth asteroids

NASA Technical Reports Server (NTRS)

Benedix, Gretchen K.; Mcfadden, Lucy Ann; Morrow, Esther M.; Fomenkova, Marina N.

1992-01-01

Knowledge of the population size and physical characteristics (albedo, size, and rotation rate) of near-Earth asteroids (NEA's) is biased by observational selection effects which are functions of the population's intrinsic properties and the size of the telescope, detector sensitivity, and search strategy used. The NEA population is modeled in terms of orbital and physical elements: a, e, i, omega, Omega, M, albedo, and diameter, and an asteroid search program is simulated using actual telescope pointings of right ascension, declination, date, and time. The position of each object in the model population is calculated at the date and time of each telescope pointing. The program tests to see if that object is within the field of view (FOV = 8.75 degrees) of the telescope and above the limiting magnitude (V = +1.65) of the film. The effect of the starting population on the outcome of the simulation's discoveries is compared to the actual discoveries in order to define a most probable starting population.

Characterizing Aeroelastic Systems Using Eigenanalysis, Explicitly Retaining The Aerodynamic Degrees of Freedom

NASA Technical Reports Server (NTRS)

Heeg, Jennifer; Dowell, Earl H.

2001-01-01

Discrete time aeroelastic models with explicitly retained aerodynamic modes have been generated employing a time marching vortex lattice aerodynamic model. This paper presents analytical results from eigenanalysis of these models. The potential of these models to calculate the behavior of modes that represent damped system motion (noncritical modes) in addition to the simple harmonic modes is explored. A typical section with only structural freedom in pitch is examined. The eigenvalues are examined and compared to experimental data. Issues regarding the convergence of the solution with regard to refining the aerodynamic discretization are investigated. Eigenvector behavior is examined; the eigenvector associated with a particular eigenvalue can be viewed as the set of modal participation factors for that particular mode. For the present formulation of the equations of motion, the vorticity for each aerodynamic element appears explicitly as an element of each eigenvector in addition to the structural dynamic generalized coordinates. Thus, modal participation of the aerodynamic degrees of freedom can be assessed in M addition to participation of structural degrees of freedom.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koike, Y.; Pitonyak, D.; Takagi, Y.

Here, we compute the contribution from the twist-3 fragmentation function for light hadron production in collisions between transversely and longitudinally polarized protons, i.e., View the MathML sourcep↑p →→hX, which can cause a double-spin asymmetry (DSA) A LT. This is a naïve T-even twist-3 observable that we analyze in collinear factorization using both Feynman gauge and lightcone gauge as well as give a general proof of color gauge invariance. So far only twist-3 effects in the transversely polarized proton have been studied for A LT in p↑p →→hX. However, there are indications that the naïve T-odd transverse single-spin asymmetry (SSA) Amore » N in p↑p→hX is dominated not by such distribution effects but rather by a fragmentation mechanism. Therefore, one may expect similarly that the fragmentation contribution is important for A LT. As a result, given possible plans at RHIC to measure this observable, it is timely to provide a calculation of this term.« less

Design and characterization of planar capacitive imaging probe based on the measurement sensitivity distribution

NASA Astrophysics Data System (ADS)

Yin, X.; Chen, G.; Li, W.; Huthchins, D. A.

2013-01-01

Previous work indicated that the capacitive imaging (CI) technique is a useful NDE tool which can be used on a wide range of materials, including metals, glass/carbon fibre composite materials and concrete. The imaging performance of the CI technique for a given application is determined by design parameters and characteristics of the CI probe. In this paper, a rapid method for calculating the whole probe sensitivity distribution based on the finite element model (FEM) is presented to provide a direct view of the imaging capabilities of the planar CI probe. Sensitivity distributions of CI probes with different geometries were obtained. Influencing factors on sensitivity distribution were studied. Comparisons between CI probes with point-to-point triangular electrode pair and back-to-back triangular electrode pair were made based on the analysis of the corresponding sensitivity distributions. The results indicated that the sensitivity distribution could be useful for optimising the probe design parameters and predicting the imaging performance.

Application of Improved 5th-Cubature Kalman Filter in Initial Strapdown Inertial Navigation System Alignment for Large Misalignment Angles

PubMed Central

Wang, Wei; Chen, Xiyuan

2018-01-01

In view of the fact the accuracy of the third-degree Cubature Kalman Filter (CKF) used for initial alignment under large misalignment angle conditions is insufficient, an improved fifth-degree CKF algorithm is proposed in this paper. In order to make full use of the innovation on filtering, the innovation covariance matrix is calculated recursively by an innovative sequence with an exponent fading factor. Then a new adaptive error covariance matrix scaling algorithm is proposed. The Singular Value Decomposition (SVD) method is used for improving the numerical stability of the fifth-degree CKF in this paper. In order to avoid the overshoot caused by excessive scaling of error covariance matrix during the convergence stage, the scaling scheme is terminated when the gradient of azimuth reaches the maximum. The experimental results show that the improved algorithm has better alignment accuracy with large misalignment angles than the traditional algorithm. PMID:29473912

Data processing for GPS common view time comparison between remote clocks

NASA Astrophysics Data System (ADS)

Li, Bian

2004-12-01

GPS CV method will play an important role in JATC (joint atomic time of China) system which is being rebuilt. The selection of common view data and the methods of filtering the random noise from the observed data are introduced. The methods to correct ionospheric delay and geometric delay for GPS CV comparison are expounded. The calculation results for the data of CV comparison between NTSC (National Time Service Conter, the Chinese Academy of Sciences) and CRL (Communications Research Laboratory, which has been renamed National Institute of Information and Communications Technology) are presented.

One dimensional two-body collisions experiment based on LabVIEW interface with Arduino

NASA Astrophysics Data System (ADS)

Saphet, Parinya; Tong-on, Anusorn; Thepnurat, Meechai

2017-09-01

The purpose of this work is to build a physics lab apparatus that is modern, low-cost and simple. In one dimensional two-body collisions experiment, we used the Arduino UNO R3 as a data acquisition system which was controlled by LabVIEW program. The photogate sensors were designed using LED and LDR to measure position as a function of the time. Aluminium frame houseware and blower were used for the air track system. In both totally inelastic and elastic collision experiments, the results of momentum and energy conservation are in good agreement with the theoretical calculations.

Contemporary Economic Debate in Britain: A View from Afar.

ERIC Educational Resources Information Center

Edwards, Ron; Millnow, Alex

1992-01-01

Seeks to explain economists' differences of opinion, through the example of contemporary British economic debate. Observes that part of the explanation lies in the complexity of economic issues. Argues that the more important factor lies in economists' ideological differences. Contrasts the views of the libertarian and market interventionist…

Greek Secondary School Students' Views about Biology

ERIC Educational Resources Information Center

Mavrikaki, Evangelia; Koumparou, Helen; Kyriakoudi, Margarita; Papacharalampous, Irene; Trimandili, Maria

2012-01-01

This paper aims to give a picture of Greek students' views about biology and some of the factors that affect them. A questionnaire measuring students' intrinsic motivation to learn biology, individual interest in biology and perceived difficulty of biology, along with information about students' gender, level, parents' occupation and educational…

Film Perception Under Ordinary Viewing Conditions

ERIC Educational Resources Information Center

Hegarty, Seamus F.

1978-01-01

After viewing a film, a sample of 10 and 11 year old children completed questionnaires which gave information on their grasp of the film's content, on matching variables, and on design factors. In this way it was possible to examine patterns in the grasp of content and relate them to other variables. (Author)

Teachers' Knowledge about and Views of the National Standards for Physical Education

ERIC Educational Resources Information Center

Chen, Weiyun

2006-01-01

This study investigated the current levels of teachers' knowledge about and views of the National Standards for Physical Education (NASPE, 1995) and factors that influenced the teachers' understandings and interpretations of the standards. Twenty-five elementary and secondary physical education teachers voluntarily participated in this study. Data…

Children Use Nonverbal Cues from an Adult to Evaluate Peers

ERIC Educational Resources Information Center

Brey, Elizabeth; Shutts, Kristin

2018-01-01

What factors contribute to children's tendency to view individuals as having different traits and abilities? The present research tested whether young children are influenced by adults' nonverbal behaviors when making inferences about peers. In Study 1, participants (aged 5-6 years) viewed multiple videos of interactions between a…

Directional infrared temperature and emissivity of vegetation: Measurements and models

NASA Technical Reports Server (NTRS)

Norman, J. M.; Castello, S.; Balick, L. K.

1994-01-01

Directional thermal radiance from vegetation depends on many factors, including the architecture of the plant canopy, thermal irradiance, emissivity of the foliage and soil, view angle, slope, and the kinetic temperature distribution within the vegetation-soil system. A one dimensional model, which includes the influence of topography, indicates that thermal emissivity of vegetation canopies may remain constant with view angle, or emissivity may increase or decrease as view angle from nadir increases. Typically, variations of emissivity with view angle are less than 0.01. As view angle increases away from nadir, directional infrared canopy temperature usually decreases but may remain nearly constant or even increase. Variations in directional temperature with view angle may be 5C or more. Model predictions of directional emissivity are compared with field measurements in corn canopies and over a bare soil using a method that requires two infrared thermometers, one sensitive to the 8 to 14 micrometer wavelength band and a second to the 14 to 22 micrometer band. After correction for CO2 absorption by the atmosphere, a directional canopy emissivity can be obtained as a function of view angle in the 8 to 14 micrometer band to an accuracy of about 0.005. Modeled and measured canopy emissivities for corn varied slightly with view angle (0.990 at nadir and 0.982 at 75 deg view zenith angle) and did not appear to vary significantly with view angle for the bare soil. Canopy emissivity is generally nearer to unity than leaf emissivity may vary by 0.02 with wavelength even though leaf emissivity. High spectral resolution, canopy thermal emissivity may vary by 0.02 with wavelength even though leaf emissivity may vary by 0.07. The one dimensional model provides reasonably accurate predictions of infrared temperature and can be used to study the dependence of infrared temperature on various plant, soil, and environmental factors.

The Strategic Importance of Central Asia: An American View

DTIC Science & Technology

2008-01-01

important the- ater in the war on terrorism. Additionally, it is viewed as a theater where America might counter a revived Russia or China, or a place to...blunt any ex- tension of Iranian influence. Moscow and Beijing view the region as a vital locale for defending critical domestic interests. This asymmetry...of interest is a major factor in the competition among states for influence in the region. American Interests Indeed, US interests derive, first of

Stakeholders' Views of Factors that Impact Successful Interagency Collaboration.

ERIC Educational Resources Information Center

Johnson, Lawrence J.; Tam, Brian Kai Yung; Zorn, Debbie; Lamontagne, Maggie; Johnson, Susan A.

2003-01-01

A study involving 33 stakeholders from nine early intervention state departments and three private social services agencies in Ohio investigated factors related to successful and unsuccessful collaborations. Significant differences were found between program chiefs and program specialists in two areas, factors jeopardizing interagency…

The p Factor: One General Psychopathology Factor in the Structure of Psychiatric Disorders?

PubMed Central

Caspi, Avshalom; Houts, Renate M.; Belsky, Daniel W.; Goldman-Mellor, Sidra J.; Harrington, HonaLee; Israel, Salomon; Meier, Madeline H.; Ramrakha, Sandhya; Shalev, Idan; Poulton, Richie; Moffitt, Terrie E.

2013-01-01

Mental disorders traditionally have been viewed as distinct, episodic, and categorical conditions. This view has been challenged by evidence that many disorders are sequentially comorbid, recurrent/chronic, and exist on a continuum. Using the Dunedin Multidisciplinary Health and Development Study, we examined the structure of psychopathology, taking into account dimensionality, persistence, co-occurrence, and sequential comorbidity of mental disorders across 20 years, from adolescence to midlife. Psychiatric disorders were initially explained by three higher-order factors (Internalizing, Externalizing, and Thought Disorder) but explained even better with one General Psychopathology dimension. We have called this dimension the p factor because it conceptually parallels a familiar dimension in psychological science: the g factor of general intelligence. Higher p scores are associated with more life impairment, greater familiality, worse developmental histories, and more compromised early-life brain function. The p factor explains why it is challenging to find causes, consequences, biomarkers, and treatments with specificity to individual mental disorders. Transdiagnostic approaches may improve research. PMID:25360393

[The importance of social relationships as a mechanism to improve the health and quality of life of the elderly, from an interdisciplinary perspective].

PubMed

Rondón García, Luis Miguel; Aguirre Arizala, Blanca Aranzazu; García García, Francisco José

2018-04-24

This study presents an analysis on the effects of positive social relationships as determining factors on the health status of the elderly, from an interdisciplinary point of view. A survey was carried out on a total of 2,332 subjects in the province of Toledo, Spain, using several scales related to the study objectives. For the multivariable analysis of the data, the linear regression, along with goodness of fit, as well as the tests of Cox, Snell and R-squared of Nagelkerke, were calculated to determine the correlation between the networks and the social contacts with the health. Good social relationships result in better health, because they allow us to feel good and add life to the years. The size of the social network, and the frequency of contacts, although decreasing with age, become vitally important at this stage of life. All these factors constitute stimuli to improve the perception of health, to provide social support in activities of daily living, as well as for instrumental or disease management. The main outcome of this study is that positive social relationships can be considered as a determining factor in the health of the elderly, but not all these interactions influence the same extent. The factor of the human relationship in terms of emotional proximity, together with the frequency or quantity of these encounters, are also correlated with health, due to the emotional impact they imply. Copyright © 2018 SEGG. Publicado por Elsevier España, S.L.U. All rights reserved.

Using a Delphi process to determine optimal care for patients with pancreatic cancer.

PubMed

Burmeister, Elizabeth A; Jordan, Susan J; O'Connell, Dianne L; Beesley, Vanessa L; Goldstein, David; Gooden, Helen M; Janda, Monika; Merrett, Neil D; Wyld, David; Neale, Rachel E

2016-06-01

Overall 5-year survival for pancreatic cancer is ∼5%. Optimizing the care that pancreatic cancer patients receive may be one way of improving outcomes. The objective of this study was to establish components of care which Australian health professionals believe important to optimally manage patients with pancreatic cancer. Using a Delphi process, a multidisciplinary panel of 250 health professionals were invited to provide a list of factors they considered important for optimal care of pancreatic cancer patients. They were then asked to score and then rescore (from one [no importance/disagree] to 10 [very important/agree]) the factors. The mean and coefficient of variation scores were calculated and categorized into three levels of importance. Overall, 63 (66% of those sent the final questionnaire; 25% of those initially invited) health professionals from nine disciplines completed the final scoring of 55 statements/factors encompassing themes of presentation/staging, surgery and biliary obstruction, multidisciplinary team details and oncology. Mean scores ranged from 3.7 to 9.7 with the highest related to communication and patient assessment. There was substantial intra- and interdisciplinary variation in views about MDT membership and roles. Overall, the opinions of Australian health professionals reflect international guideline recommended care; however, they identified a number of additional factors focusing on where patients should be treated, the importance of clear communication and the need for multidisciplinary care which were not included in current clinical practice guidelines. Differences in priorities between specialty groups were also identified. © 2016 John Wiley & Sons Australia, Ltd.

On a fast calculation of structure factors at a subatomic resolution.

PubMed

Afonine, P V; Urzhumtsev, A

2004-01-01

In the last decade, the progress of protein crystallography allowed several protein structures to be solved at a resolution higher than 0.9 A. Such studies provide researchers with important new information reflecting very fine structural details. The signal from these details is very weak with respect to that corresponding to the whole structure. Its analysis requires high-quality data, which previously were available only for crystals of small molecules, and a high accuracy of calculations. The calculation of structure factors using direct formulae, traditional for 'small-molecule' crystallography, allows a relatively simple accuracy control. For macromolecular crystals, diffraction data sets at a subatomic resolution contain hundreds of thousands of reflections, and the number of parameters used to describe the corresponding models may reach the same order. Therefore, the direct way of calculating structure factors becomes very time expensive when applied to large molecules. These problems of high accuracy and computational efficiency require a re-examination of computer tools and algorithms. The calculation of model structure factors through an intermediate generation of an electron density [Sayre (1951). Acta Cryst. 4, 362-367; Ten Eyck (1977). Acta Cryst. A33, 486-492] may be much more computationally efficient, but contains some parameters (grid step, 'effective' atom radii etc.) whose influence on the accuracy of the calculation is not straightforward. At the same time, the choice of parameters within safety margins that largely ensure a sufficient accuracy may result in a significant loss of the CPU time, making it close to the time for the direct-formulae calculations. The impact of the different parameters on the computer efficiency of structure-factor calculation is studied. It is shown that an appropriate choice of these parameters allows the structure factors to be obtained with a high accuracy and in a significantly shorter time than that required when using the direct formulae. Practical algorithms for the optimal choice of the parameters are suggested.

Secondary students' views about scientific inquiry

NASA Astrophysics Data System (ADS)

Galano, Silvia; Zappia, Alessandro; Smaldone, Luigi; Testa, Italo

2016-05-01

In this study we investigated the views about Scientific Inquiry (SI) of about 300 students at the beginning of the secondary school course (14-15years old). An adapted version of the Views On Scientific Inquiry (VOSI) questionnaire was used as research instrument. The questionnaire, focused on six specific aspects of SI, was submitted before and after a six-hours in-classroom delivery of a teaching-learning sequence (TLS) that targeted explicitly the six SI aspects. We first analyzed responses using a five-level categorization: a) informed view; b) mixed or partially correct view; c) naıve view; d) unclear; e) not given. Two independent researchers iteratively analyzed the data with a final inter-rater reliability of about 90%. Then, we collapsed the initial categories into three macro-categories: C1) informed/partial view; C2) naıve view; C3) unclear or not given; and calculated the shift in the macro-categorization between pre- and post-test. Finally, we investigated a possible relationship between how the TLSs were enacted and the students' achievements. Data show that the percentage of students' informed responses only slightly increased between pre- and post-test in the majority of the targeted aspects. Moreover, students' achievements seem to depend on how the teachers enacted the TLSs. Our results suggest that short inquiry-based teaching interventions are not sufficient to effectively teach SI aspects. Moreover, our results suggest to develop specific training courses aimed at improving teachers' own beliefs and practices about SI.

HYDROGEN ATOM BOND INCREMENTS (HBI) FOR CALCULATION OF THERMODYNAMIC PROPERTIES OF HYDROCARBON RADICAL SPECIES. (R824970)

EPA Science Inventory

The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

[Charnley-type total hip prosthesis. Radiological technic of angular measurements of the acetabular piece (anteversion)].

PubMed

Chevrot, A; Najman, G

1983-01-01

A radiological technique is described based on the study of antero-posterior and lateral views of the hip. Mathematical calculations by trigonometry make it possible to deduce the degree of anteversion of the acetabular cup. The necessary tables are given.

A comparison of the views of extension agents and farmers regarding extension education courses in Dezful, Iran

NASA Astrophysics Data System (ADS)

Nazarzadeh Zare, Mohsen; Dorrani, Kamal; Gholamali Lavasani, Masoud

2012-11-01

Background and purpose : This study examines the views of farmers and extension agents participating in extension education courses in Dezful, Iran, with regard to problems with these courses. It relies upon a descriptive methodology, using a survey as its instrument. Sample : The statistical population consisted of 5060 farmers and 50 extension agents; all extension agents were studied owing to their small population and a sample of 466 farmers was selected based on the stratified ratio sampling method. For the data analysis, statistical procedures including the t-test and factor analysis were used. Results : The results of factor analysis on the views of farmers indicated that these courses have problems such as inadequate use of instructional materials by extension agents, insufficient employment of knowledgeable and experienced extension agents, bad and inconvenient timing of courses for farmers, lack of logical connection between one curriculum and prior ones, negligence in considering the opinions of farmers in arranging the courses, and lack of information about the time of courses. The findings of factor analysis on the views of extension agents indicated that these courses suffer from problems such as use of consistent methods of instruction for teaching curricula, and lack of continuity between courses and their levels and content. Conclusions : Recommendations include: listening to the views of farmers when planning extension courses; providing audiovisual aids, pamphlets and CDs; arranging courses based on convenient timing for farmers; using incentives to encourage participation; and employing extension agents with knowledge of the latest agricultural issues.

Context before implementation: a qualitative study of decision makers' views of a peer-led healthy lifestyle intervention for people with serious mental illness in supportive housing.

PubMed

Cabassa, Leopoldo J; Stefancic, Ana

2018-04-04

People with serious mental illness die at an earlier age than people in the general population largely due to cardiovascular disease. Healthy lifestyle interventions can help reduce this health inequity. In this qualitative study, we examined the perceptions that decision makers in supportive housing agencies had toward a peer-led healthy lifestyle intervention and their views of contextual factors that could shape implementation at these agencies. A purposive sample of 12 decision makers from three supportive housing agencies was recruited. We presented participants a vignette describing our peer-led intervention and used semistructured qualitative interviews to examine their views. Interviews were recorded, professionally transcribed, and analyzed using directed content analysis. Participants reported positive views toward the intervention with the most valued intervention attributes being relative advantage over existing services, compatibility to clients' needs, ability to pilot the intervention, and cost. A model emerged from our data depicting multilevel contextual factors believed to shape the implementation of our intervention at these agencies, including system- (funding, marketability, and external regulations), organization- (leadership support, fit with organization, staff buy-in and burden), and client-level (adaptability to clients' needs, and clients' buy-in) factors. Study findings illustrate the importance of understanding the context of practice before implementation. This examination can help identify critical views from decision makers that could undermine or advance the integration of peer-led interventions in supportive housing agencies and help identify structures, policies, and organizational practices that can inform the implementation process.

Factors contributing to perceptions about policies regarding the electronic monitoring of sex offenders: the role of demographic characteristics, victimization experiences, and social disorganization.

PubMed

Button, Deeanna M; Tewksbury, Richard; Mustaine, Elizabeth E; Payne, Brian K

2013-01-01

The purpose of this article is to explore factors contributing to perceptions about electronic monitoring policies governing sex offenders. Guided by Tannenbaum's theory of attribution and Shaw and McKay's theory of social disorganization, the authors examine the influence of demographic characteristics, victimization experiences, and neighborhood characteristics on perceptions about policies regarding the electronic monitoring of sex offenders. Ordinary least squares regression and logistic regression analyses of stratified telephone survey data reveal that factors associated with favorable views on the use of global positioning satellite monitoring for registered sex offenders appear to stem primarily from individuals' demographic characteristics. Experiential and neighborhood factors do provide some influence over individuals' views of electronic monitoring policies for sex offenders. Theoretical and policy implications are discussed.

Preliminary Analysis of the Hydrologic and Geochemical Controls on Acid-Neutralizing Capacity in Two Acidic Seepage Lakes in Florida

NASA Astrophysics Data System (ADS)

Pollman, Curtis D.; Lee, T. M.; Andrews, W. J.; Sacks, L. A.; Gherini, S. A.; Munson, R. K.

1991-09-01

In late 1988, parallel studies of Lake Five-O (pH 5.14) in the Florida panhandle and Lake Barco (pH 4.50) in north central Florida were initiated to develop hydrologic and major ion budgets of these lakes as part of an overall effort to improve understanding of the hydrologic, depositional, and biogeochemical factors that control acid-neutralizing capacity (ANC) in seepage lakes. Preliminary findings from these studies indicate that earlier perceptions of lake hydrology and mechanisms of ANC regulation in Florida seepage lakes may have to be revised. The traditional perspective of seepage lakes in the Florida panhandle views these systems as dominated by precipitation inputs and that ANC regulation is due largely to in-lake processes. Our results for Lake Five-O show modest to steep hydraulic gradients almost entirely around the lake. In addition, the horizontal hydraulic conductivity of the surficial aquifer is high (8-74 m day-1), indicating that large quantities of groundwater flow into Lake Five-O. Calculations of net groundwater flow from hydrologic budgets also indicate that groundwater may comprise at least 38 to 46% of the total inflow. For Lake Barco, net flow estimates of the minimum groundwater inflow range from 5 to 14% of total inflow. Enrichment factor and ion flux calculations for Lake Five-O and Lake Barco indicate that terrestrial as well as in-lake processes contribute significantly to ANC regulation. The extent that terrestrial processes contribute to ANC generation is directly related to the magnitude of groundwater inflow as well as the degree of ion enrichment or depletion that occurs in the surficial aquifer. Net ANC generation in both study lakes was dominated by anion retention (NO3- and SO42-). Where previous studies concluded that in-lake reduction was the primary sink for SO42-, our preliminary calculations show that adsorption of SO42- within the watershed is perhaps twice as important as in-lake reduction as a source of ANC. Net base cation enrichment in both lakes was negligible.

Matching mammographic regions in mediolateral oblique and cranio caudal views: a probabilistic approach

NASA Astrophysics Data System (ADS)

Samulski, Maurice; Karssemeijer, Nico

2008-03-01

Most of the current CAD systems detect suspicious mass regions independently in single views. In this paper we present a method to match corresponding regions in mediolateral oblique (MLO) and craniocaudal (CC) mammographic views of the breast. For every possible combination of mass regions in the MLO view and CC view, a number of features are computed, such as the difference in distance of a region to the nipple, a texture similarity measure, the gray scale correlation and the likelihood of malignancy of both regions computed by single-view analysis. In previous research, Linear Discriminant Analysis was used to discriminate between correct and incorrect links. In this paper we investigate if the performance can be improved by employing a statistical method in which four classes are distinguished. These four classes are defined by the combinations of view (MLO/CC) and pathology (TP/FP) labels. We use distance-weighted k-Nearest Neighbor density estimation to estimate the likelihood of a region combination. Next, a correspondence score is calculated as the likelihood that the region combination is a TP-TP link. The method was tested on 412 cases with a malignant lesion visible in at least one of the views. In 82.4% of the cases a correct link could be established between the TP detections in both views. In future work, we will use the framework presented here to develop a context dependent region matching scheme, which takes the number and likelihood of possible alternatives into account. It is expected that more accurate determination of matching probabilities will lead to improved CAD performance.

Viewpoint dependence in the recognition of non-elongated familiar objects: testing the effects of symmetry, front-back axis, and familiarity.

PubMed

Niimi, Ryosuke; Yokosawa, Kazuhiko

2009-01-01

Visual recognition of three-dimensional (3-D) objects is relatively impaired for some particular views, called accidental views. For most familiar objects, the front and top views are considered to be accidental views. Previous studies have shown that foreshortening of the axes of elongation of objects in these views impairs recognition, but the influence of other possible factors is largely unknown. Using familiar objects without a salient axis of elongation, we found that a foreshortened symmetry plane of the object and low familiarity of the viewpoint accounted for the relatively worse recognition for front views and top views, independently of the effect of a foreshortened axis of elongation. We found no evidence that foreshortened front-back axes impaired recognition in front views. These results suggest that the viewpoint dependence of familiar object recognition is not a unitary phenomenon. The possible role of symmetry (either 2-D or 3-D) in familiar object recognition is also discussed.

The influence of radiographic viewing perspective and demographics on the Critical Shoulder Angle

PubMed Central

Suter, Thomas; Popp, Ariane Gerber; Zhang, Yue; Zhang, Chong; Tashjian, Robert Z.; Henninger, Heath B.

2014-01-01

Background Accurate assessment of the critical shoulder angle (CSA) is important in clinical evaluation of degenerative rotator cuff tears. This study analyzed the influence of radiographic viewing perspective on the CSA, developed a classification system to identify malpositioned radiographs, and assessed the relationship between the CSA and demographic factors. Methods Glenoid height, width and retroversion were measured on 3D CT reconstructions of 68 cadaver scapulae. A digitally reconstructed radiograph was aligned perpendicular to the scapular plane, and retroversion was corrected to obtain a true antero-posterior (AP) view. In 10 scapulae, incremental anteversion/retroversion and flexion/extension views were generated. The CSA was measured and a clinically applicable classification system was developed to detect views with >2° change in CSA versus true AP. Results The average CSA was 33±4°. Intra- and inter-observer reliability was high (ICC≥0.81) but decreased with increasing viewing angle. Views beyond 5° anteversion, 8° retroversion, 15° flexion and 26° extension resulted in >2° deviation of the CSA compared to true AP. The classification system was capable of detecting aberrant viewing perspectives with sensitivity of 95% and specificity of 53%. Correlations between glenoid size and CSA were small (R≤0.3), and CSA did not vary by gender (p=0.426) or side (p=0.821). Conclusions The CSA was most susceptible to malposition in ante/retroversion. Deviations as little as 5° in anteversion resulted in a CSA >2° from true AP. A new classification system refines the ability to collect true AP radiographs of the scapula. The CSA was unaffected by demographic factors. PMID:25591458

Electric dipole transitions for four-times ionized cerium (Ce V)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Usta, Betül Karaçoban, E-mail: bkaracoban@sakarya.edu.tr; Akgün, Elif, E-mail: elif.akgun@ogr.sakarya.edu.tr; Alparslan, Büşra, E-mail: busra.alparslan1@ogr.sakarya.edu.tr

2016-03-25

We have calculated the transition parameters, such as wavelengths, oscillator strengths, and transition probabilities (or rates), for the electric dipole (E1) transitions in four-times ionized cerium (Ce V, Z = 58) by using the multiconfiguration Hartree-Fock method within the framework of Breit-Pauli (MCHF+BP) relativistic corrections and the relativistic Hartree-Fock (HFR) method. The obtained results have been compared with other works available in literature. A discussion of these calculations for Ce V in this study has also been in view of the MCHF+BP and HFR methods.

Diffuse interstellar bands in reflection nebulae

NASA Technical Reports Server (NTRS)

Fischer, O.; Henning, Thomas; Pfau, Werner; Stognienko, R.

1994-01-01

A Monte Carlo code for radiation transport calculations is used to compare the profiles of the lambda lambda 5780 and 6613 Angstrom diffuse interstellar bands in the transmitted and the reflected light of a star embedded within an optically thin dust cloud. In addition, the behavior of polarization across the bands were calculated. The wavelength dependent complex indices of refraction across the bands were derived from the embedded cavity model. In view of the existence of different families of diffuse interstellar bands the question of other parameters of influence is addressed in short.

Fourier-transform and global contrast interferometer alignment methods

DOEpatents

Goldberg, Kenneth A.

2001-01-01

Interferometric methods are presented to facilitate alignment of image-plane components within an interferometer and for the magnified viewing of interferometer masks in situ. Fourier-transforms are performed on intensity patterns that are detected with the interferometer and are used to calculate pseudo-images of the electric field in the image plane of the test optic where the critical alignment of various components is being performed. Fine alignment is aided by the introduction and optimization of a global contrast parameter that is easily calculated from the Fourier-transform.

Solute geochemistry of the Snake River plain regional aquifer system, Idaho and eastern Oregon

USGS Publications Warehouse

Wood, Warren W.; Low, Walton H.

1988-01-01

Geothermometry calculations of selected ground-water samples from known geothermal areas throughout the basin suggest that the geother- mal system is large in areal extent but has relatively low temperatures. Approximately half of the silica-quartz calculated water temperatures are greater than 90 °C. Radiocarbon dating of geothermal water in the Salmon Falls and Bruneau-Grand View areas in the south central part of the Snake River basin suggests that residence time of the geother- mal water is about 17,700 years.

Stratospheric Ozone Trends and Variability as Seen by SCIAMACHY from 2002 to 2012

NASA Technical Reports Server (NTRS)

Gebhardt, C.; Rozanov, A.; Hommel, R.; Weber, M.; Bovensmann, H.; Burrows, J. P.; Degenstein, D.; Froidevaux, L.; Thompson, A. M.

2014-01-01

Vertical profiles of the rate of linear change (trend) in the altitude range 15-50 km are determined from decadal O3 time series obtained from SCIAMACHY/ENVISAT measurements in limb-viewing geometry. The trends are calculated by using a multivariate linear regression. Seasonal variations, the quasi-biennial oscillation, signatures of the solar cycle and the El Nino-Southern Oscillation are accounted for in the regression. The time range of trend calculation is August 2002-April 2012. A focus for analysis are the zonal bands of 20 deg N - 20 deg S (tropics), 60 - 50 deg N, and 50 - 60 deg S (midlatitudes). In the tropics, positive trends of up to 5% per decade between 20 and 30 km and negative trends of up to 10% per decade between 30 and 38 km are identified. Positive O3 trends of around 5% per decade are found in the upper stratosphere in the tropics and at midlatitudes. Comparisons between SCIAMACHY and EOS MLS show reasonable agreement both in the tropics and at midlatitudes for most altitudes. In the tropics, measurements from OSIRIS/Odin and SHADOZ are also analysed. These yield rates of linear change of O3 similar to those from SCIAMACHY. However, the trends from SCIAMACHY near 34 km in the tropics are larger than MLS and OSIRIS by a factor of around two.

Dosimetry in x-ray-based breast imaging

PubMed Central

Dance, David R; Sechopoulos, Ioannis

2016-01-01

The estimation of the mean glandular dose to the breast (MGD) for x-ray based imaging modalities forms an essential part of quality control and is needed for risk estimation and for system design and optimisation. This review considers the development of methods for estimating the MGD for mammography, digital breast tomosynthesis (DBT) and dedicated breast CT (DBCT). Almost all of the methodology used employs Monte Carlo calculated conversion factors to relate the measurable quantity, generally the incident air kerma, to the MGD. After a review of the size and composition of the female breast, the various mathematical models used are discussed, with particular emphasis on models for mammography. These range from simple geometrical shapes, to the more recent complex models based on patient DBCT examinations. The possibility of patient-specific dose estimates is considered as well as special diagnostic views and the effect of breast implants. Calculations using the complex models show that the MGD for mammography is overestimated by about 30% when the simple models are used. The design and uses of breast-simulating test phantoms for measuring incident air kerma are outlined and comparisons made between patient and phantom-based dose estimates. The most widely used national and international dosimetry protocols for mammography are based on different simple geometrical models of the breast, and harmonisation of these protocols using more complex breast models is desirable. PMID:27617767

Effect of final evaluation on job motivation from the perspective of nurses in Ahvaz Hospitals in 2012

PubMed Central

Faraji Khiavi, F; Amiri, E; Ghobadian, S; Roshankar, R

2015-01-01

Background: Increasing nurses’ motivation is among the most important and complex nursing duties. Performance evaluation system could be used as a means to improve the quantity and quality of the human resources. Therefore, current research objected to evaluate the effect of final evaluation on job motivation from the perspective of nurses in Ahvaz hospitals according to Herzberg scheme. Methods: This investigation conducted in 2012. Research population included nurses in Ahvaz educational hospitals. The sample size was calculated 120 and sampling was performed based on classification and random sampling. Research instrument was a self-made questionnaire with confirmed validity through content analysis and Cronbach’s alpha calculated at 0.94. Data examined utilizing ANOVA, T-Test, and descriptive statistics. Results: The nurses considered the final evaluation on management policy (3.2 ± 1.11) and monitoring (3.15 ± 1.15) among health items and responsibility (3.15 ± 1.15) and progress (3.06 ± 1.24) among motivational factors relatively effective. There was a significant association between scores of nurses' views in different age and sex groups (P = 0.01), but there was no significant association among respondents in educational level and marital status. Conclusion: Experienced nurses believed that evaluation has little effect on job motivation. If annual assessment of the various job aspects are considered, managers could use it as an efficient tool to motivate nurses. PMID:28316733

Effect of final evaluation on job motivation from the perspective of nurses in Ahvaz Hospitals in 2012.

PubMed

Faraji Khiavi, F; Amiri, E; Ghobadian, S; Roshankar, R

2015-01-01

Background: Increasing nurses' motivation is among the most important and complex nursing duties. Performance evaluation system could be used as a means to improve the quantity and quality of the human resources. Therefore, current research objected to evaluate the effect of final evaluation on job motivation from the perspective of nurses in Ahvaz hospitals according to Herzberg scheme. Methods: This investigation conducted in 2012. Research population included nurses in Ahvaz educational hospitals. The sample size was calculated 120 and sampling was performed based on classification and random sampling. Research instrument was a self-made questionnaire with confirmed validity through content analysis and Cronbach's alpha calculated at 0.94. Data examined utilizing ANOVA, T-Test, and descriptive statistics. Results: The nurses considered the final evaluation on management policy (3.2 ± 1.11) and monitoring (3.15 ± 1.15) among health items and responsibility (3.15 ± 1.15) and progress (3.06 ± 1.24) among motivational factors relatively effective. There was a significant association between scores of nurses' views in different age and sex groups (P = 0.01), but there was no significant association among respondents in educational level and marital status. Conclusion: Experienced nurses believed that evaluation has little effect on job motivation. If annual assessment of the various job aspects are considered, managers could use it as an efficient tool to motivate nurses.

[The Effect of Observation Geometry on Polarized Skylight Spectrum].

PubMed

Zhang, Ren-bin; Wang, Ling-mei; Gao, Jun; Wang, Chi

2015-03-01

Study on polarized skylight spectral characters while observation geometry changing in different solar zenith angles (SZA), viewing zenith angles (VZA) or relative azimuth angles (RAA). Simulation calculation of cloudless daylight polarimetric spectrum is realized based on the solver, vector discrete ordinate method, of radiative transfer equation. In the Sun's principal and perpendicular plane, the spectral irradiance data, varying at wavelengths in the range between 0.4 and 3 μm, are calculated to extend the atmospheric polarization spectral information under the conditions: the MODTRAN solar reference spectrur is the only illuminant source; the main influencing factors of polarized radiative transfer include underlying surface albedo, aerosol layers and components, and the absorption of trace gases. Simulation analysis results: (1) While the relative azimuth angle is zero, the magnitude of spectrum U/I is lower than 10(-7) and V/I is negligible, the degree of polarization and the spectrum Q/I are shaped like the letter V or mirror-writing U. (2) In twilight, when the Sun is not in FOV of the detector, the polarization of the daytime sky has two maximum near 0.51 and 2.75 μm, and a minimum near 1.5 μm. For arbitrary observation geometry, the spectral signal of V/I may be ignored. According to observation geometry, choosing different spectral bands or polarized signal will be propitious to targets detection.

Dosimetry in x-ray-based breast imaging

NASA Astrophysics Data System (ADS)

Dance, David R.; Sechopoulos, Ioannis

2016-10-01

The estimation of the mean glandular dose to the breast (MGD) for x-ray based imaging modalities forms an essential part of quality control and is needed for risk estimation and for system design and optimisation. This review considers the development of methods for estimating the MGD for mammography, digital breast tomosynthesis (DBT) and dedicated breast CT (DBCT). Almost all of the methodology used employs Monte Carlo calculated conversion factors to relate the measurable quantity, generally the incident air kerma, to the MGD. After a review of the size and composition of the female breast, the various mathematical models used are discussed, with particular emphasis on models for mammography. These range from simple geometrical shapes, to the more recent complex models based on patient DBCT examinations. The possibility of patient-specific dose estimates is considered as well as special diagnostic views and the effect of breast implants. Calculations using the complex models show that the MGD for mammography is overestimated by about 30% when the simple models are used. The design and uses of breast-simulating test phantoms for measuring incident air kerma are outlined and comparisons made between patient and phantom-based dose estimates. The most widely used national and international dosimetry protocols for mammography are based on different simple geometrical models of the breast, and harmonisation of these protocols using more complex breast models is desirable.

Particulate matter analysis at elementary schools in Curitiba, Brazil.

PubMed

Avigo, Devanir; Godoi, Ana F L; Janissek, Paulo R; Makarovska, Yaroslava; Krata, Agnieszka; Potgieter-Vermaak, Sanja; Alfoldy, Balint; Van Grieken, René; Godoi, Ricardo H M

2008-06-01

The particulate matter indoors and outdoors of the classrooms at two schools in Curitiba, Brazil, was characterised in order to assess the indoor air quality. Information concerning the bulk composition was provided by energy-dispersive x-ray fluorescence (EDXRF). From the calculated indoor/outdoor ratios and the enrichment factors it was observed that S-, Cl- and Zn-rich particles are of concern in the indoor environment. In the present research, the chemical compositions of individual particles were quantitatively elucidated, including low-Z components like C, N and O, as well as higher-Z elements, using automated electron probe microanalysis low Z EPMA. Samples were further analysed for chemical and morphological aspects, determining the particle size distribution and classifying them according to elemental composition associations. Five classes were identified based on major elemental concentrations: aluminosilicate, soot, organic, calcium carbonate and iron-rich particles. The majority of the respirable particulate matter found inside of the classroom was composed of soot, biogenic and aluminosilicate particles. In view of the chemical composition and size distribution of the aerosol particles, local deposition efficiencies in the human respiratory system were calculated revealing the deposition of soot at alveolar level. The results showed that on average 42% of coarse particles are deposited at the extrathoracic level, whereas 24% are deposited at the pulmonary region. The fine fraction showed a deposition rate of approximately 18% for both deposition levels.

Laser pulse coded signal frequency measuring device based on DSP and CPLD

NASA Astrophysics Data System (ADS)

Zhang, Hai-bo; Cao, Li-hua; Geng, Ai-hui; Li, Yan; Guo, Ru-hai; Wang, Ting-feng

2011-06-01

Laser pulse code is an anti-jamming measures used in semi-active laser guided weapons. On account of the laser-guided signals adopting pulse coding mode and the weak signal processing, it need complex calculations in the frequency measurement process according to the laser pulse code signal time correlation to meet the request in optoelectronic countermeasures in semi-active laser guided weapons. To ensure accurately completing frequency measurement in a short time, it needed to carry out self-related process with the pulse arrival time series composed of pulse arrival time, calculate the signal repetition period, and then identify the letter type to achieve signal decoding from determining the time value, number and rank number in a signal cycle by Using CPLD and DSP for signal processing chip, designing a laser-guided signal frequency measurement in the pulse frequency measurement device, improving the signal processing capability through the appropriate software algorithms. In this article, we introduced the principle of frequency measurement of the device, described the hardware components of the device, the system works and software, analyzed the impact of some system factors on the accuracy of the measurement. The experimental results indicated that this system improve the accuracy of the measurement under the premise of volume, real-time, anti-interference, low power of the laser pulse frequency measuring device. The practicality of the design, reliability has been demonstrated from the experimental point of view.

Implementation and analysis of list mode algorithm using tubes of response on a dedicated brain and breast PET

NASA Astrophysics Data System (ADS)

Moliner, L.; Correcher, C.; González, A. J.; Conde, P.; Hernández, L.; Orero, A.; Rodríguez-Álvarez, M. J.; Sánchez, F.; Soriano, A.; Vidal, L. F.; Benlloch, J. M.

2013-02-01

In this work we present an innovative algorithm for the reconstruction of PET images based on the List-Mode (LM) technique which improves their spatial resolution compared to results obtained with current MLEM algorithms. This study appears as a part of a large project with the aim of improving diagnosis in early Alzheimer disease stages by means of a newly developed hybrid PET-MR insert. At the present, Alzheimer is the most relevant neurodegenerative disease and the best way to apply an effective treatment is its early diagnosis. The PET device will consist of several monolithic LYSO crystals coupled to SiPM detectors. Monolithic crystals can reduce scanner costs with the advantage to enable implementation of very small virtual pixels in their geometry. This is especially useful for LM reconstruction algorithms, since they do not need a pre-calculated system matrix. We have developed an LM algorithm which has been initially tested with a large aperture (186 mm) breast PET system. Such an algorithm instead of using the common lines of response, incorporates a novel calculation of tubes of response. The new approach improves the volumetric spatial resolution about a factor 2 at the border of the field of view when compared with traditionally used MLEM algorithm. Moreover, it has also shown to decrease the image noise, thus increasing the image quality.

TauFactor: An open-source application for calculating tortuosity factors from tomographic data

NASA Astrophysics Data System (ADS)

Cooper, S. J.; Bertei, A.; Shearing, P. R.; Kilner, J. A.; Brandon, N. P.

TauFactor is a MatLab application for efficiently calculating the tortuosity factor, as well as volume fractions, surface areas and triple phase boundary densities, from image based microstructural data. The tortuosity factor quantifies the apparent decrease in diffusive transport resulting from convolutions of the flow paths through porous media. TauFactor was originally developed to improve the understanding of electrode microstructures for batteries and fuel cells; however, the tortuosity factor has been of interest to a wide range of disciplines for over a century, including geoscience, biology and optics. It is still common practice to use correlations, such as that developed by Bruggeman, to approximate the tortuosity factor, but in recent years the increasing availability of 3D imaging techniques has spurred interest in calculating this quantity more directly. This tool provides a fast and accurate computational platform applicable to the big datasets (>108 voxels) typical of modern tomography, without requiring high computational power.

SU-F-J-23: Field-Of-View Expansion in Cone-Beam CT Reconstruction by Use of Prior Information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haga, A; Magome, T; Nakano, M

Purpose: Cone-beam CT (CBCT) has become an integral part of online patient setup in an image-guided radiation therapy (IGRT). In addition, the utility of CBCT for dose calculation has actively been investigated. However, the limited size of field-of-view (FOV) and resulted CBCT image with a lack of peripheral area of patient body prevents the reliability of dose calculation. In this study, we aim to develop an FOV expanded CBCT in IGRT system to allow the dose calculation. Methods: Three lung cancer patients were selected in this study. We collected the cone-beam projection images in the CBCT-based IGRT system (X-ray volumemore » imaging unit, ELEKTA), where FOV size of the provided CBCT with these projections was 410 × 410 mm{sup 2} (normal FOV). Using these projections, CBCT with a size of 728 × 728 mm{sup 2} was reconstructed by a posteriori estimation algorithm including a prior image constrained compressed sensing (PICCS). The treatment planning CT was used as a prior image. To assess the effectiveness of FOV expansion, a dose calculation was performed on the expanded CBCT image with region-of-interest (ROI) density mapping method, and it was compared with that of treatment planning CT as well as that of CBCT reconstructed by filtered back projection (FBP) algorithm. Results: A posteriori estimation algorithm with PICCS clearly visualized an area outside normal FOV, whereas the FBP algorithm yielded severe streak artifacts outside normal FOV due to under-sampling. The dose calculation result using the expanded CBCT agreed with that using treatment planning CT very well; a maximum dose difference was 1.3% for gross tumor volumes. Conclusion: With a posteriori estimation algorithm, FOV in CBCT can be expanded. Dose comparison results suggested that the use of expanded CBCTs is acceptable for dose calculation in adaptive radiation therapy. This study has been supported by KAKENHI (15K08691).« less

Calculating Permittivity and Dielectric Loss Frequency Spectra for Aqueous Electrolyte Solutions

NASA Astrophysics Data System (ADS)

Odinaev, S.; Makhmadbegov, R. S.

2018-01-01

Analytic expressions for dielectric permittivity factor ɛ1(ω) and dielectric dissipation factor ɛ2(ω) of electrolyte solutions are obtained, based on the ratio between complex factors of dielectric permittivity and specific conductivity. The range of frequency dispersion of dynamic factors ɛ1(ω) and ɛ2(ω) for aqueous solutions of LiCl, NaCl, KCl, and CsCl is considered. Numerical calculations are performed for friction coefficients β a and β b ; relaxation times τ a , τ b , and τ ab ; and factors ɛ1(ω) and ɛ2(ω) in a wide range of variation for ρ; concentration c; temperature T; and frequencies ω. The resulting theoretically calculated ɛ1(ω) and ɛ2(ω) values and the Cole-Cole diagram are in quantitative agreement with experimental data.

Factors that influence the choice of psychiatry as a career by medical students at the School of Medicine, College of Health Sciences, University of Nairobi.

PubMed

Ndetei, David M; Ngumi, Zipporah W; Mutiso, Victoria N; Musyimi, Christine W; Kamau, Lucy W

2013-08-01

The aim of this paper is to assess the particular factors facilitating and those hampering the choice of psychiatry as a career by medical students at the University of Nairobi in a cross-sectional population study of medical students at the University of Nairobi, College of Health Sciences, School of Medicine using self-administered questionnaires. A total of 31 students (13%) said they would like to be psychiatrists while 44 (18%) were neutral and 170 (69%) did not want to become psychiatrists. The factors that made psychiatry interesting for the students included the view that the problems presented by psychiatric patients were often particularly interesting and challenging and the fact that mental illness presented the field of medicine with one of the greatest challenges. Discouraging factors articulated by the students included views that psychiatry was a vague and speculative speciality, psychiatry was not an important part of the curriculum in medical schools, and psychiatric patients tend to make more emotional demands on their doctors than other patients. There was a negative view of psychiatric patients who most of the students thought were strange, dangerous and incurable, although they were curious to know more about them. Most of the negative influence in psychiatry is due to the misconceptions that students have about its prestige and scope, the rewards it offers in terms of job satisfaction and opportunities and the negative views towards psychiatric patients. Integration of psychiatry into the curriculum may address these misunderstandings.

The effects of neighborhood views containing multiple environmental features on road traffic noise perception at dwellings.

PubMed

Leung, T M; Xu, J M; Chau, C K; Tang, S K; Pun-Cheng, L S C

2017-04-01

The importance of non-acoustical factors including the type of visual environment on human noise perception becomes increasingly recognized. In order to reveal the relationships between long-term noise annoyance and different types of neighborhood views, 2033 questionnaire responses were collected for studying the effect of perceptions of different combinations of views of sea, urban river, greenery, and/or noise barrier on the annoyance responses from residents living in high-rise apartments in Hong Kong. The collected responses were employed to formulate a multivariate model to predict the probability of invoking a high annoyance response from residents. Results showed that views of sea, urban river, or greenery could lower the probability, while views of noise barrier could increase the probability. Views of greenery had a stronger noise moderation capability than views of sea or urban river. The presence of an interaction effect between views of water and views of noise barrier exerted a negative influence on the noise annoyance moderation capability. The probability due to exposure to an environment containing views of noise barriers and urban rivers would be even higher than that due to exposure to an environment containing views of noise barriers alone.

Evaluation of viewing experiences induced by a curved three-dimensional display

NASA Astrophysics Data System (ADS)

Mun, Sungchul; Park, Min-Chul; Yano, Sumio

2015-10-01

Despite an increased need for three-dimensional (3-D) functionality in curved displays, comparisons pertinent to human factors between curved and flat panel 3-D displays have rarely been tested. This study compared stereoscopic 3-D viewing experiences induced by a curved display with those of a flat panel display by evaluating subjective and objective measures. Twenty-four participants took part in the experiments and viewed 3-D content with two different displays (flat and curved 3-D display) within a counterbalanced and within-subject design. For the 30-min viewing condition, a paired t-test showed significantly reduced P300 amplitudes, which were caused by engagement rather than cognitive fatigue, in the curved 3-D viewing condition compared to the flat 3-D viewing condition at P3 and P4. No significant differences in P300 amplitudes were observed for 60-min viewing. Subjective ratings of realness and engagement were also significantly higher in the curved 3-D viewing condition than in the flat 3-D viewing condition for 30-min viewing. Our findings support that curved 3-D displays can be effective for enhancing engagement among viewers based on specific viewing times and environments.