82. View of specialized maintenance shop in transmitter building no. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

82. View of specialized maintenance shop in transmitter building no. 101, showing technical publications library and equipment logging trays. - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK

Practice makes perfect: self-reported adherence a positive marker of inhaler technique maintenance.

PubMed

Azzi, Elizabeth; Srour, Pamela; Armour, Carol; Rand, Cynthia; Bosnic-Anticevich, Sinthia

2017-04-24

Poor inhaler technique and non-adherence to treatment are major problems in the management of asthma. Patients can be taught how to achieve good inhaler technique, however maintenance remains problematic, with 50% of patients unable to demonstrate correct technique. The aim of this study was to determine the clinical, patient-related and/or device-related factors that predict inhaler technique maintenance. Data from a quality-controlled longitudinal community care dataset was utilized. 238 patients using preventer medications where included. Data consisted of patient demographics, clinical data, medication-related factors and patient-reported outcomes. Mixed effects logistic regression was used to identify predictors of inhaler technique maintenance at 1 month. The variables found to be independently associated with inhaler technique maintenance using logistic regression (Χ 2 (3,n = 238) = 33.24, p < 0.000) were inhaler technique at Visit 1 (OR 7.1), device type (metered dose inhaler and dry powder inhalers) (OR 2.2) and self-reported adherent behavior in the prior 7 days (OR 1.3). This research is the first to unequivocally establish a predictive relationship between inhaler technique maintenance and actual patient adherence, reinforcing the notion that inhaler technique maintenance is more than just a physical skill. Inhaler technique maintenance has an underlying behavioral component, which future studies need to investigate. BEHAVIORAL ELEMENT TO CORRECT LONG-TERM INHALER TECHNIQUES: Patients who consciously make an effort to perfect asthma inhaler technique will maintain their skills long-term. Elizabeth Azzi at the University of Sydney, Australia, and co-workers further add evidence that there is a strong behavioral component to patients retaining correct inhaler technique over time. Poor inhaler technique can limit asthma control, affecting quality of life and increasing the chances of severe exacerbations. Azzi's team followed 238 patients to determine the key predictors of inhaler technique maintenance from factors including age, asthma knowledge and perceived future risks. Correct inhaler technique at initial assessment was the strongest predictor of long-term success, but this was strengthened further when patients reported good adherence to their own medication regimen. This suggests that maintaining correct inhaler technique is more than just a physical skill. Careful guidance towards this 'practice makes perfect' approach may improve patients' long-term technique maintenance.

VIEW OF EMERGENCY RESPONSE VEHICLES PARKED OUTSIDE BUILDING 331, THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF EMERGENCY RESPONSE VEHICLES PARKED OUTSIDE BUILDING 331, THE VEHICLE MAINTENANCE GARAGE AND FIRE STATION. THE BUILDING, ORIGINALLY CONSTRUCTED IN 1953, WAS DESIGNED AND UTILIZED AS A WAREHOUSE. ADDITIONS TO THE STRUCTURE, INCLUDING THE FIRE DEPARTMENT STRUCTURE, WERE COMPLETED IN 1967. (4/7/87) - Rocky Flats Plant, Vehicle Maintenance Garage & Fire Station, Golden, Jefferson County, CO

85. View of specialized maintenance shop in transmitter building no. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

85. View of specialized maintenance shop in transmitter building no. 101, showing test bed with meters, power supplies, oscilloscopes, and other electronic test equipment. - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK

At-a-glance monitoring: covert observations of anesthesiologists in the operating room.

PubMed

Ford, Simon; Birmingham, Elina; King, Ashlee; Lim, Joanne; Ansermino, J Mark

2010-09-01

Patient monitoring displays are designed to improve patient safety, and yet little is known about how anesthesiologists interact with these displays. Previous studies of clinician behavior used an observer in the operating room, which may have altered behavior. We describe a covert observation technique to determine how often and for how long anesthesiologists actually look at the monitoring display during different segments of the maintenance phase of anesthesia, and to determine whether this changed with more than 1 anesthesia provider or during concomitant activities such as reading. Five staff anesthesiologists, 2 anesthesia fellows, 3 anesthesia residents, and 2 medical students were covertly videotaped across 10 dual anesthesia provider cases and 10 solo cases. Videotapes were later segmented (5 minutes postinduction [early maintenance], mid-maintenance, and immediately before the drapes came down [late maintenance]) and coded for looking behavior at the patient monitor, anesthesia chart, and other reading material. Anesthesiologists looked at the monitor in 1- to 2-second glances, performed frequently throughout the 3 segments of maintenance anesthesia. Overall, the patient monitor was looked at only 5 of the analyzed time, which is less than has previously been reported. Monitoring behavior was constant across the segments of maintenance anesthesia and was not significantly affected by the number of anesthesia providers or role (trainee vs. senior). In contrast, charting behavior and other reading material viewing changed significantly over the analyzed segments of maintenance anesthesia. The presence of "at-a-glance monitoring" has implications for the design of patient monitoring displays. Displays should be developed to optimize the information obtained from brief glances at the monitor.

Mechatronics technology in predictive maintenance method

NASA Astrophysics Data System (ADS)

Majid, Nurul Afiqah A.; Muthalif, Asan G. A.

2017-11-01

This paper presents recent mechatronics technology that can help to implement predictive maintenance by combining intelligent and predictive maintenance instrument. Vibration Fault Simulation System (VFSS) is an example of mechatronics system. The focus of this study is the prediction on the use of critical machines to detect vibration. Vibration measurement is often used as the key indicator of the state of the machine. This paper shows the choice of the appropriate strategy in the vibration of diagnostic process of the mechanical system, especially rotating machines, in recognition of the failure during the working process. In this paper, the vibration signature analysis is implemented to detect faults in rotary machining that includes imbalance, mechanical looseness, bent shaft, misalignment, missing blade bearing fault, balancing mass and critical speed. In order to perform vibration signature analysis for rotating machinery faults, studies have been made on how mechatronics technology is used as predictive maintenance methods. Vibration Faults Simulation Rig (VFSR) is designed to simulate and understand faults signatures. These techniques are based on the processing of vibrational data in frequency-domain. The LabVIEW-based spectrum analyzer software is developed to acquire and extract frequency contents of faults signals. This system is successfully tested based on the unique vibration fault signatures that always occur in a rotating machinery.

Architecture and Key Techniques of Augmented Reality Maintenance Guiding System for Civil Aircrafts

NASA Astrophysics Data System (ADS)

hong, Zhou; Wenhua, Lu

2017-01-01

Augmented reality technology is introduced into the maintenance related field for strengthened information in real-world scenarios through integration of virtual assistant maintenance information with real-world scenarios. This can lower the difficulty of maintenance, reduce maintenance errors, and improve the maintenance efficiency and quality of civil aviation crews. Architecture of augmented reality virtual maintenance guiding system is proposed on the basis of introducing the definition of augmented reality and analyzing the characteristics of augmented reality virtual maintenance. Key techniques involved, such as standardization and organization of maintenance data, 3D registration, modeling of maintenance guidance information and virtual maintenance man-machine interaction, are elaborated emphatically, and solutions are given.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gonzalez Anez, Francisco

This paper presents two development projects (STARMATE and VIRMAN) focused on supporting training on maintenance. Both projects aim at specifying, designing, developing, and demonstrating prototypes allowing computer guided maintenance of complex mechanical elements using Augmented and Virtual Reality techniques. VIRMAN is a Spanish development project. The objective is to create a computer tool for maintenance training course elaborations and training delivery based on 3D virtual reality models of complex components. The training delivery includes 3D record displays on maintenance procedures with all complementary information for intervention understanding. Users are requested to perform the maintenance intervention trying to follow up themore » procedure. Users can be evaluated about the level of knowledge achieved. Instructors can check the evaluation records left during the training sessions. VIRMAN is simple software supported by a regular computer and can be used in an Internet framework. STARMATE is a forward step in the area of virtual reality. STARMATE is a European Commission project in the frame of 'Information Societies Technologies'. A consortium of five companies and one research institute shares their expertise in this new technology. STARMATE provides two main functionalities (1) user assistance for achieving assembly/de-assembly and following maintenance procedures, and (2) workforce training. The project relies on Augmented Reality techniques, which is a growing area in Virtual Reality research. The idea of Augmented Reality is to combine a real scene, viewed by the user, with a virtual scene, generated by a computer, augmenting the reality with additional information. The user interface is see-through goggles, headphones, microphone and an optical tracking system. All these devices are integrated in a helmet connected with two regular computers. The user has his hands free for performing the maintenance intervention and he can navigate in the virtual world thanks to a voice recognition system and a virtual pointing device. The maintenance work is guided with audio instructions, 2D and 3D information are directly displayed into the user's goggles: There is a position-tracking system that allows 3D virtual models to be displayed in the real counterpart positions independently of the user allocation. The user can create his own virtual environment, placing the information required wherever he wants. The STARMATE system is applicable to a large variety of real work situations. (author)« less

A probabilistic maintenance model for diesel engines

NASA Astrophysics Data System (ADS)

Pathirana, Shan; Abeygunawardane, Saranga Kumudu

2018-02-01

In this paper, a probabilistic maintenance model is developed for inspection based preventive maintenance of diesel engines based on the practical model concepts discussed in the literature. Developed model is solved using real data obtained from inspection and maintenance histories of diesel engines and experts' views. Reliability indices and costs were calculated for the present maintenance policy of diesel engines. A sensitivity analysis is conducted to observe the effect of inspection based preventive maintenance on the life cycle cost of diesel engines.

Inhaler technique maintenance: gaining an understanding from the patient's perspective.

PubMed

Ovchinikova, Ludmila; Smith, Lorraine; Bosnic-Anticevich, Sinthia

2011-08-01

The aim of this study was to determine the patient-, education-, and device-related factors that predict inhaler technique maintenance. Thirty-one community pharmacists were trained to deliver inhaler technique education to people with asthma. Pharmacists evaluated (based on published checklists), and where appropriate, delivered inhaler technique education to patients (participants) in the community pharmacy at baseline (Visit 1) and 1 month later (Visit 2). Data were collected on participant demographics, asthma history, current asthma control, history of inhaler technique education, and a range of psychosocial aspects of disease management (including adherence to medication, motivation for correct technique, beliefs regarding the importance of maintaining correct technique, and necessity and concern beliefs regarding preventer therapy). Stepwise backward logistic regression was used to identify the predictors of inhaler technique maintenance at 1 month. In total 145 and 127 participants completed Visits 1 and 2, respectively. At baseline, 17% of patients (n = 24) demonstrated correct technique (score 11/11) which increased to 100% (n = 139) after remedial education by pharmacists. At follow-up, 61% (n = 77) of patients demonstrated correct technique. The predictors of inhaler technique maintenance based on the logistic regression model (X(2) (3, N = 125) = 16.22, p = .001) were use of a dry powder inhaler over a pressurized metered-dose inhaler (OR 2.6), having better asthma control at baseline (OR 2.3), and being more motivated to practice correct inhaler technique (OR 1.2). Contrary to what is typically recommended in previous research, correct inhaler technique maintenance may involve more than repetition of instructions. This study found that past technique education factors had no bearing on technique maintenance, whereas patient psychosocial factors (motivation) did.

A Survey of the Aircraft Maintenance Industry to Solicit Perceptions Regarding the Effectiveness of Recent Graduates of F.A.A. Approved Maintenance Schools.

ERIC Educational Resources Information Center

O'Brian, Benjamin H.

A study examined the perceptions of employers in the aircraft maintenance industry regarding the effectiveness of recent graduates of Federal Aeronautics Administration (FAA)-approved maintenance schools. Of the 100 employers who were contacted, 68 returned usable surveys. Based on responses, it was concluded that the views of employers in the…

VIEW OF CEMETERY SECTIONS B AND A, WITH LODGE BUILDING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF CEMETERY SECTIONS B AND A, WITH LODGE BUILDING AT RIGHT BACKGROUND AND MAINTENANCE BUILDING FAR LEFT BACKGROUND. VIEW TO NORTHEAST. - Cold Harbor National Cemetery, 6038 Cold Harbor Road, Mechanicsville, Hanover County, VA

School Renovation and the Importance of Maintenance. [Interview with Charles Boney, Jr.].

ERIC Educational Resources Information Center

Butterfield, Eric

Charles Boney, Jr., Director of Boney Architects, offers his views on school districts that build schools that have to be replaced too soon, general problems concerning renovation of older buildings, and keeping maintenance costs down. He discusses the types of flooring materials school districts should consider using to lower maintenance costs…

1. General oblique view of the context, view to northeast, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. General oblique view of the context, view to northeast, showing vehicle bays at west end and overhead doors at east end - Fort Hood, World War II Temporary Buildings, Company Maintenance Shop & Arms Room, North of Park Avenue at Forty-ninth Street, Killeen, Bell County, TX

A Feasibility Study of the Collection of Unscheduled Maintenance Data Using Statistical Sampling Techniques.

DTIC Science & Technology

1985-09-01

TECHNIQUES THESIS Robert A. Heinlein Captain, USAF AFIT/GLM/LSM/855-32.- _ DTIC MU’noN ’ST.,TEMENT A A-ZELECTE Approved lt public teleo*I Al \\ Z #&N0V21...343" A FEASIBILITY STUDY OF THE COLLECTION OF UNSCHEDULED MAINTENANCE DATA USING STrATISTICAL SAMPLING TECHNIQUES THESIS L .9 Robe-t A. Heinlein...a AFIT/GLM/LSM/85S-32 A FEASIBILITY STUDY OF THE COLLECTION OF UNSCHEDULED MAINTENANCE DATA USING STATISTICAL SAMPLING TECHNIQUES THESIS

Indentured Parts List Maintenance and Part Assembly Capture Tool - IMPACT

NASA Technical Reports Server (NTRS)

Jain, Bobby; Morris, Jill; Sharpe, Kelly

2004-01-01

Johnson Space Center's (JSC's) indentured parts list (IPL) maintenance and parts assembly capture tool (IMPACT) is an easy-to-use graphical interface for viewing and maintaining the complex assembly hierarchies of large databases. IMPACT, already in use at JSC to support the International Space Station (ISS), queries, updates, modifies, and views data in IPL and associated resource data, functions that it can also perform, with modification, for any large commercial database. By enabling its users to efficiently view and manipulate IPL hierarchical data, IMPACT performs a function unlike that of any other tool. Through IMPACT, users will achieve results quickly, efficiently, and cost effectively.

RENEW v3.2 user's manual, maintenance estimation simulation for Space Station Freedom Program

NASA Technical Reports Server (NTRS)

Bream, Bruce L.

1993-01-01

RENEW is a maintenance event estimation simulation program developed in support of the Space Station Freedom Program (SSFP). This simulation uses reliability and maintainability (R&M) and logistics data to estimate both average and time dependent maintenance demands. The simulation uses Monte Carlo techniques to generate failure and repair times as a function of the R&M and logistics parameters. The estimates are generated for a single type of orbital replacement unit (ORU). The simulation has been in use by the SSFP Work Package 4 prime contractor, Rocketdyne, since January 1991. The RENEW simulation gives closer estimates of performance since it uses a time dependent approach and depicts more factors affecting ORU failure and repair than steady state average calculations. RENEW gives both average and time dependent demand values. Graphs of failures over the mission period and yearly failure occurrences are generated. The averages demand rate for the ORU over the mission period is also calculated. While RENEW displays the results in graphs, the results are also available in a data file for further use by spreadsheets or other programs. The process of using RENEW starts with keyboard entry of the R&M and operational data. Once entered, the data may be saved in a data file for later retrieval. The parameters may be viewed and changed after entry using RENEW. The simulation program runs the number of Monte Carlo simulations requested by the operator. Plots and tables of the results can be viewed on the screen or sent to a printer. The results of the simulation are saved along with the input data. Help screens are provided with each menu and data entry screen.

Maintenance Audit through Value Analysis Technique: A Case Study

NASA Astrophysics Data System (ADS)

Carnero, M. C.; Delgado, S.

2008-11-01

The increase in competitiveness, technological changes and the increase in the requirements of quality and service have forced a change in the design and application of maintenance, as well as the way in which it is considered within the managerial strategy. There are numerous maintenance activities that must be developed in a service company. As a result the maintenance functions as a whole have to be outsourced. Nevertheless, delegating this subject to specialized personnel does not exempt the company from responsibilities, but rather leads to the need for control of each maintenance activity. In order to achieve this control and to evaluate the efficiency and effectiveness of the company it is essential to carry out an audit that diagnoses the problems that could develop. In this paper a maintenance audit applied to a service company is developed. The methodology applied is based on the expert systems. The expert system by means of rules uses the weighting technique SMART and value analysis to obtain the weighting between the decision functions and between the alternatives. The expert system applies numerous rules and relations between different variables associated with the specific maintenance functions, to obtain the maintenance state by sections and the general maintenance state of the enterprise. The contributions of this paper are related to the development of a maintenance audit in a service enterprise, in which maintenance is not generally considered a strategic subject and to the integration of decision-making tools such as the weighting technique SMART with value analysis techniques, typical in the design of new products, in the area of the rule-based expert systems.

Differential effects of cognitive load on emotion: Emotion maintenance versus passive experience.

PubMed

DeFraine, William C

2016-06-01

Two separate lines of research have examined the effects of cognitive load on emotional processing with similar tasks but seemingly contradictory results. Some research has shown that the emotions elicited by passive viewing of emotional images are reduced by subsequent cognitive load. Other research has shown that such emotions are not reduced by cognitive load if the emotions are actively maintained. The present study sought to compare and resolve these 2 lines of research. Participants either passively viewed negative emotional images or maintained the emotions elicited by the images, and after a delay rated the intensity of the emotion they were feeling. Half of trials included a math task during the delay to induce cognitive load, and the other half did not. Results showed that cognitive load reduced the intensity of negative emotions during passive-viewing of emotional images but not during emotion maintenance. The present study replicates the findings of both lines of research, and shows that the key factor is whether or not emotions are actively maintained. Also, in the context of previous emotion maintenance research, the present results support the theoretical idea of a separable emotion maintenance process. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

31. INTERIOR VIEW TO THE EAST OF THE FIRST FLOOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

31. INTERIOR VIEW TO THE EAST OF THE FIRST FLOOR SOUTH CORRIDOR AND VIEWING GALLERY TO THE DISASSEMBLY BAY AND POST-MORTEM CELLS. VIEWING STATIONS ARE ON BOTH SIDES OF THE CORRIDOR. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

33. INTERIOR VIEW TO THE SOUTHWEST OF ROOM 135, A ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

33. INTERIOR VIEW TO THE SOUTHWEST OF ROOM 135, A FIRST FLOOR CORRIDOR AND VIEWING GALLERY NEXT TO THE POST-MORTEM CELLS. VIEWING AND WORK STATIONS ARE ON THE WEST WALL. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

Coexistence of insulin resistance and increased glucose tolerance in pregnant rats: a physiological mechanism for glucose maintenance.

PubMed

Carrara, Marcia Aparecida; Batista, Márcia Regina; Saruhashi, Tiago Ribeiro; Felisberto, Antonio Machado; Guilhermetti, Marcio; Bazotte, Roberto Barbosa

2012-06-06

The contribution of insulin resistance (IR) and glucose tolerance to the maintenance of blood glucose levels in non diabetic pregnant Wistar rats (PWR) was investigated. PWR were submitted to conventional insulin tolerance test (ITT) and glucose tolerance test (GTT) using blood sample collected 0, 10 and 60 min after intraperitoneal insulin (1 U/kg) or oral (gavage) glucose (1g/kg) administration. Moreover, ITT, GTT and the kinetics of glucose concentration changes in the fed and fasted states were evaluated with a real-time continuous glucose monitoring system (RT-CGMS) technique. Furthermore, the contribution of the liver glucose production was investigated. Conventional ITT and GTT at 0, 7, 14 and 20 days of pregnancy revealed increased IR and glucose tolerance after 20 days of pregnancy. Thus, this period of pregnancy was used to investigate the kinetics of glucose changes with the RT-CGMS technique. PWR (day 20) exhibited a lower (p<0.05) glucose concentration in the fed state. In addition, we observed IR and increased glucose tolerance in the fed state (PWR-day 20 vs. day 0). Furthermore, our data from glycogenolysis and gluconeogenesis suggested that the liver glucose production did not contribute to these changes in insulin sensitivity and/or glucose tolerance during late pregnancy. In contrast to the general view that IR is a pathological process associated with gestational diabetes, a certain degree of IR may represent an important physiological mechanism for blood glucose maintenance during fasting. Copyright © 2012 Elsevier Inc. All rights reserved.

Renal Denervation to Modify Hypertension and the Heart Failure State.

PubMed

Zhong, Ming; Kim, Luke K; Swaminathan, Rajesh V; Feldman, Dmitriy N

2017-07-01

Sympathetic overactivation of renal afferent and efferent nerves have been implicated in the development and maintenance of several cardiovascular disease states, including resistant hypertension and heart failure with both reduced and preserved systolic function. With the development of minimally invasive catheter-based techniques, percutaneous renal denervation has become a safe and effective method of attenuating sympathetic overactivation. Percutaneous renal denervation, therefore, has the potential to modify and treat hypertension and congestive heart failure. Although future randomized controlled studies are needed to definitively prove its efficacy, renal denervation has the potential to change the way we view and treat cardiovascular disease. Copyright © 2017 Elsevier Inc. All rights reserved.

Aspects of remote maintenance in an FRG reprocessing plant from the manufacturer's viewpoint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zeitzchel, G.; Tennie, M.; Saal, G.

In April 1986 a consortium led by Kraftwerk Union AG was commissioned by the German society for nuclear fuel reprocessing (DWK) to build the first West German commercial reprocessing plant for spent fuel assemblies. The main result of the planning efforts regarding remote maintenance operations inside the main process building was the introduction of FEMO technology (FEMO is an acronym based on German for remote handling modular technique). According to this technology the two cells in which the actual reprocessing (which is based on the PUREX technique) takes place are provided with frames to accommodate the process components (tanks, pumps,more » agitators, etc.), each frame together with the components which it supports forming one module. The two cells are inaccessible and windowless. For handling operations each cell is equipped with an overhead crane and a crane-like manipulator carrier system (MTS) with power manipulator. Viewing of the operations from outside the cells is made possible by television (TV) cameras installed at the crane, the MTS, and the manipulator. This paper addresses some examples of problems that still need to be solved in connection with FEMO handling. In particular, the need for close cooperation between the equipment operator, the component designer, the process engineer, the planning engineer, and the licensing authorities will be demonstrated.« less

INTERIOR OF BUILDING, LOOKING TOWARD FRONT. VIEW TO SOUTHEAST. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

INTERIOR OF BUILDING, LOOKING TOWARD FRONT. VIEW TO SOUTHEAST. - Plattsburgh Air Force Base, Munitions Maintenance Administration Building, Off Perimeter Road in Weapons Storage Area, Plattsburgh, Clinton County, NY

INTERIOR OF BUILDING, LOOKING TOWARD REAR. VIEW TO NORTH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

INTERIOR OF BUILDING, LOOKING TOWARD REAR. VIEW TO NORTH - Plattsburgh Air Force Base, Munitions Maintenance Administration Building, Off Perimeter Road in Weapons Storage Area, Plattsburgh, Clinton County, NY

INTERIOR OF LOCKER ROOM. view TO SOUTHWEST. Plattsburgh Air ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

INTERIOR OF LOCKER ROOM. view TO SOUTHWEST. - Plattsburgh Air Force Base, Air Force Communications Systems (AFCS) Maintenance Facility, Off Alabama Avenue, adjacent to Flightline Apron, Plattsburgh, Clinton County, NY

35. INTERIOR VIEW TO THE NORTHWEST OF ROOM 152, A ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

35. INTERIOR VIEW TO THE NORTHWEST OF ROOM 152, A FIRST FLOOR CORRIDOR AND VIEWING GALLERY ON THE WEST SIDE OF THE POST-MORTEM CELLS. VIEWING AND WORK STATIONS ARE IN THE EAST WALL. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

A particle swarm model for estimating reliability and scheduling system maintenance

NASA Astrophysics Data System (ADS)

Puzis, Rami; Shirtz, Dov; Elovici, Yuval

2016-05-01

Modifying data and information system components may introduce new errors and deteriorate the reliability of the system. Reliability can be efficiently regained with reliability centred maintenance, which requires reliability estimation for maintenance scheduling. A variant of the particle swarm model is used to estimate reliability of systems implemented according to the model view controller paradigm. Simulations based on data collected from an online system of a large financial institute are used to compare three component-level maintenance policies. Results show that appropriately scheduled component-level maintenance greatly reduces the cost of upholding an acceptable level of reliability by reducing the need in system-wide maintenance.

10. VIEW WITHIN THE EAST OPERATING GALLERY OF WORK STATION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. VIEW WITHIN THE EAST OPERATING GALLERY OF WORK STATION WITH MANIPULATOR ARMS. - Nevada Test Site, Engine Maintenance Assembly & Disassembly Facility, Area 25, Jackass Flats, Mercury, Nye County, NV

Optimized ex-ovo culturing of chick embryos to advanced stages of development.

PubMed

Cloney, Kellie; Franz-Odendaal, Tamara Anne

2015-01-24

Research in anatomy, embryology, and developmental biology has largely relied on the use of model organisms. In order to study development in live embryos model organisms, such as the chicken, are often used. The chicken is an excellent model organism due to its low cost and minimal maintenance, however they present observational challenges because they are enclosed in an opaque eggshell. In order to properly view the embryo as it develops, the shell must be windowed or removed. Both windowing and ex ovo techniques have been developed to assist researchers in the study of embryonic development. However, each of the methods has limitations and challenges. Here, we present a simple, optimized ex ovo culture technique for chicken embryos that enables the observation of embryonic development from stage HH 19 into late stages of development (HH 40), when many organs have developed. This technique is easy to adopt in both undergraduate classes and more advanced research laboratories where embryo manipulations are conducted.

Webinar: Making the Connection: Linking IAQ, Energy Efficiency and Preventive Maintenance Together for Healthy Schools

EPA Pesticide Factsheets

A page to register to view the February 22, 2018, Energy Savings Plus Health for Schools Webinar Series Webinar: Making the Connection: Linking IAQ, Energy Efficiency and Preventive Maintenance Together for Healthy Schools

How Project Management Tools Aid in Association to Advance Collegiate Schools of Business (AACSB) International Maintenance of Accreditation

ERIC Educational Resources Information Center

Cann, Cynthia W.; Brumagim, Alan L.

2008-01-01

The authors present the case of one business college's use of project management techniques as tools for accomplishing Association to Advance Collegiate Schools of Business (AACSB) International maintenance of accreditation. Using these techniques provides an efficient and effective method of organizing maintenance efforts. In addition, using…

EAST (SIDE) AND NORTH (REAR) ELEVATIONS OF BUILDING. VIEW TO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

EAST (SIDE) AND NORTH (REAR) ELEVATIONS OF BUILDING. VIEW TO SOUTHWEST. - Plattsburgh Air Force Base, Munitions Maintenance Administration Building, Off Perimeter Road in Weapons Storage Area, Plattsburgh, Clinton County, NY

NORTH (REAR) AND EAST (SIDE) ELEVATIONS OF BUILDING. VIEW TO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

NORTH (REAR) AND EAST (SIDE) ELEVATIONS OF BUILDING. VIEW TO SOUTH. - Plattsburgh Air Force Base, Munitions Maintenance Administration Building, Off Perimeter Road in Weapons Storage Area, Plattsburgh, Clinton County, NY

SOUTH (FRONT) AND WEST (SIDE) ELEVATIONS OF BUILDING. VIEW TO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

SOUTH (FRONT) AND WEST (SIDE) ELEVATIONS OF BUILDING. VIEW TO NORTH. - Plattsburgh Air Force Base, Munitions Maintenance Administration Building, Off Perimeter Road in Weapons Storage Area, Plattsburgh, Clinton County, NY

Counseling Psychologists Who View Their Careers as a Calling: A Qualitative Study

ERIC Educational Resources Information Center

Duffy, Ryan D.; Foley, Pamela F.; Raque-Bodgan, Trisha L.; Reid-Marks, Laura; Dik, Bryan J.; Castano, Megan C.; Adams, Christopher M.

2012-01-01

Interviews were completed with eight counseling psychologists who viewed their careers as a calling. Using the Consensual Qualitative Research guidelines, six domains emerged: definition, process of discerning, content of the calling, professional impact, personal impact, and maintenance. Generally, interviewees viewed the discernment of their…

49 CFR 230.65 - Steam blocking view of engine crew.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Steam blocking view of engine crew. 230.65 Section... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Boilers and Appurtenances Steam Leaks § 230.65 Steam blocking view of engine crew. The steam locomotive owner and/or...

[A comparative study of maintenance services using the data-mining technique].

PubMed

Cruz, Antonio M; Aguilera-Huertas, Wilmer A; Días-Mora, Darío A

2009-08-01

The main goal in this research was comparing two hospitals' maintenance service quality. One of them had a contract service; the other one had an in-house maintenance service. The authors followed the next stages when conducting this research: domain understanding, data characterisation and sample reduction, insight characterisation and building the TAT predictor. Multiple linear regression and clustering techniques were used for improving the efficiency of corrective maintenance tasks in a clinical engineering department (CED). The indicator being studied was turnaround time (TAT). The institution having an in-house maintenance service had better quality indicators than the contract maintenance service. There was lineal dependence between availability and service productivity.

Maintenance: Two Views.

ERIC Educational Resources Information Center

Ballard, J. Barry; Burdette, Clarence E.

1987-01-01

Presents two viewpoints on the question of using funding from the Vocational Education Act to maintain ongoing vocational programs. Ballard argues that programs have improved qualitatively because of additional program improvement monies, whereas Burdette argues that the ban on using funds for maintenance treats some states unfairly. (CH)

[The impact of an art therapy programme for cancer patients--an analysis from different points of view].

PubMed

Geue, Kristina; Buttstädt, Marianne; Singer, Susanne; Kleinert, Evelyn; Richter, Robert; Götze, Heide; Böhler, Ursula; Becker, Cornelia; Brähler, Elmar

2011-01-01

Art therapy is used in the whole field of psycho-oncological maintenance to support coping mechanisms with creative techniques. Previous studies stated effects of art therapy just by referring to the participants' ratings. This study wants to extend the perspective by including the views of all involved parties--participating patients, dropouts, art therapist and supervisor. We developed and tested an art therapy programme for cancer patients. The participants' and dropouts' ratings were documented by using a questionnaire with open and closed questions upon completion of the intervention. The art therapist and the supervisor described their personal point of view. 74 patients took part in the intervention whereof 18 dropped out. Of these, 8 could be interviewed regarding the reasons for not participating further in the study. The dropouts evaluated the intervention positively(4/8) or could not make a final statement (3/8). 55 questionnaires were available from the 56 participants. They described the importance of the programme in several ways. Most of all, they reported of: stimulation of imagination (50/55), emotional stabilisation(48/55), enlargement of means of expression (45/55) and contact with other patients (42/55). The dropouts named several reasons for their decision to cancel: too intense focus on the disease(N = 3), modern drawing (N = 1), too much talks (N = 1) and too much sketching (N = 1) were some points of criticism. The art therapist as well as the supervisor emphasized activation as a main outcome for the participants. Positive effects of the intervention programme highlight the importance of establishing an art therapy in ambulant care. It enlarges the range of psychosocial maintenance and enables oncological patients to cope with the disease and its consequences with artistic means.

34. INTERIOR VIEW TO THE NORTH OF ROOMS 143 AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

34. INTERIOR VIEW TO THE NORTH OF ROOMS 143 AND 150, A FIRST FLOOR CORRIDOR AND VIEWING GALLERY ON THE EAST SIDE OF THE POST-MORTEM CELLS. VIEWING AND WORK STATIONS ARE IN THE NORTH AND WEST WALLS. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

14. VIEW IN THE WEST OPERATING GALLERY OF POSTMORTEM CELL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. VIEW IN THE WEST OPERATING GALLERY OF POST-MORTEM CELL WORK STATION AND MANIPULATOR ARMS. - Nevada Test Site, Engine Maintenance Assembly & Disassembly Facility, Area 25, Jackass Flats, Mercury, Nye County, NV

7. EXTERIOR VIEW TO THE SOUTHWEST OF THE NORTH AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. EXTERIOR VIEW TO THE SOUTHWEST OF THE NORTH AND EAST ELEVATIONS. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

9. EXTERIOR VIEW TO THE NORTHWEST OF THE SOUTH AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. EXTERIOR VIEW TO THE NORTHWEST OF THE SOUTH AND EAST ELEVATIONS. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

View of building 11070, with building 11050 in the background ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of building 11070, with building 11050 in the background (left side). Looking northeast. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Maintenance Shop, C Street, China Lake, Kern County, CA

View of building 11070 showing vents and forced air system ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of building 11070 showing vents and forced air system on east side, looking southwest. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Maintenance Shop, C Street, China Lake, Kern County, CA

Interpersonal Coordination: Methods, Achievements, and Challenges

PubMed Central

Cornejo, Carlos; Cuadros, Zamara; Morales, Ricardo; Paredes, Javiera

2017-01-01

Research regarding interpersonal coordination can be traced back to the early 1960s when video recording began to be utilized in communication studies. Since then, technological advances have extended the range of techniques that can be used to accurately study interactional phenomena. Although such a diversity of methods contributes to the improvement of knowledge concerning interpersonal coordination, it has become increasingly difficult to maintain a comprehensive view of the field. In the present article, we review the main capture methods by describing their major findings, levels of description and limitations. We group them into three categories: video analysis, motion tracking, and psychophysiological and neurophysiological techniques. Revised evidence suggests that interpersonal coordination encompasses a family of morphological and temporal synchronies at different levels and that it is closely related to the construction and maintenance of a common social and affective space. We conclude by arguing that future research should address methodological challenges to advance the understanding of coordination phenomena. PMID:29021769

How visual short-term memory maintenance modulates subsequent visual aftereffects.

PubMed

Saad, Elyana; Silvanto, Juha

2013-05-01

Prolonged viewing of a visual stimulus can result in sensory adaptation, giving rise to perceptual phenomena such as the tilt aftereffect (TAE). However, it is not known if short-term memory maintenance induces such effects. We examined how visual short-term memory (VSTM) maintenance modulates the strength of the TAE induced by subsequent visual adaptation. We reasoned that if VSTM maintenance induces aftereffects on subsequent encoding of visual information, then it should either enhance or reduce the TAE induced by a subsequent visual adapter, depending on the congruency of the memory cue and the adapter. Our results were consistent with this hypothesis and thus indicate that the effects of VSTM maintenance can outlast the maintenance period.

Webinar: Clean Air in the Classroom: Improve Air Quality, Extend HVAC System Life with Preventive Maintenance

EPA Pesticide Factsheets

A page to register to view the May 17, 2018, webinar in the IAQ Knowledge-to-Action Professional Training Webinar Series: Clean Air in the Classroom: Improve Air Quality, Extend HVAC System Life with Preventive Maintenance

Development of updated specifications for roadway rehabilitation techniques.

DOT National Transportation Integrated Search

2011-05-01

As our nations highway system continues to age, asphalt maintenance and rehabilitation techniques have become increasingly important. The deterioration of pavement over time is inevitable. Preventive maintenance is a strategy to extend the service...

16. VIEW OF FIRST FLOOR EAST OPERATING GALLERY. NOTE THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

16. VIEW OF FIRST FLOOR EAST OPERATING GALLERY. NOTE THE SERIES OF MANIPULATOR ARMS ALONG THE LEFT WALL. - Nevada Test Site, Engine Maintenance Assembly & Disassembly Facility, Area 25, Jackass Flats, Mercury, Nye County, NV

1. GENERAL VIEW TO THE WEST OF THE EMAD FACILITY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. GENERAL VIEW TO THE WEST OF THE E-MAD FACILITY AND THE SURROUNDING ENVIRONMENTAL AND TOPOGRAPHICAL SETTING. - Nevada Test Site, Engine Maintenance Assembly & Disassembly Facility, Area 25, Jackass Flats, Mercury, Nye County, NV

7. VIEW OF E5 WORK STATION AND MANIPULATOR ARMS WITHIN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. VIEW OF E-5 WORK STATION AND MANIPULATOR ARMS WITHIN THE SOUTHEAST CORNER OF THE HOT BAY. - Nevada Test Site, Engine Maintenance Assembly & Disassembly Facility, Area 25, Jackass Flats, Mercury, Nye County, NV

14. INTERIOR VIEW TO THE SOUTH OF ROOM 136, COLD ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. INTERIOR VIEW TO THE SOUTH OF ROOM 136, COLD ASSEMBLY BAY NO. 2. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

13. INTERIOR VIEW TO THE SOUTHEAST OF ROOM 101, COLD ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. INTERIOR VIEW TO THE SOUTHEAST OF ROOM 101, COLD ASSEMBLY BAY NO. 1. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

1. NORTH AND EAST SIDES OF BUILDING 627. VIEW TO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. NORTH AND EAST SIDES OF BUILDING 627. VIEW TO SOUTHWEST. - Rocky Mountain Arsenal, Vehicle Maintenance Shop, 2130 feet North of Sixth Avenue; 300 feet West of B Street, Commerce City, Adams County, CO

38. INTERIOR VIEW TO THE NORTHWEST OF THE SECOND FLOOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

38. INTERIOR VIEW TO THE NORTHWEST OF THE SECOND FLOOR CORRIDOR ON THE SOUTH SIDE OF THE DISASSEMBLY BAY. VIEWING AND WORK STATIONS ARE ALONG THE NORTH WALL OF THE CORRIDOR. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

78 FR 57496 - Approval and Promulgation of Air Quality Implementation Plans; State of Colorado Second Ten-Year...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-19

... FURTHER INFORMATION CONTACT section to view the hard copy of the docket. You may view the hard copy of the... to illustrate your concerns, and suggest alternatives. g. Explain your views as clearly as possible..., Maintenance Demonstration, Monitoring Network/Verification of Continued Attainment, Contingency Plan, and...

Knowledge elicitation techniques and application to nuclear plant maintenance

NASA Astrophysics Data System (ADS)

Doyle, E. Kevin

The new millennium has brought with it the opportunity of global trade which in turn requires the utmost in efficiency from each individual industry. This includes the nuclear power industry, a point which was emphasized when the electrical generation industry began to be de regulated across North America the late 1990s and re-emphasized when the northeast power grid of North America collapsed in the summer of 2003. This dissertation deals with reducing the cost of the maintenance function of Candu nuclear power plants and initiating a strong link between universities and the Canadian nuclear industry. Various forms of RCM (reliability-centred maintenance) have been the tools of choice in industry for improving the maintenance function during the last 20 years. In this project, pilot studies, conducted at Bruce Power between 1999 and 2005, and reported on in this dissertation, lay out a path to implement statistical improvements as the next step after RCM in reducing the cost of the maintenance. Elicitation protocols, designed for the age group being elicited, address the much-documented issue of a lack of data. Clear, graphical, inferential statistical interfaces are accentuated and developed to aid in building the teams required to implement the various methodologies and to help in achieving funding targets. Graphical analysis and Crow/AMSAA (army materials systems analysis activity) plots are developed and demonstrated from the point of view of justifying the expenditures of cost reduction efforts. This dissertation ultimately speaks to the great opportunity being presented by this approach at this time: of capturing the baby-boom generation's huge pool of knowledge before those people retire. It is expected that the protocols and procedures referenced here will have applicability across the many disciplines where collecting expert information from a similar age group is required.

32. INTERIOR VIEW TO THE NORTH OF THE FIRST FLOOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

32. INTERIOR VIEW TO THE NORTH OF THE FIRST FLOOR EAST CORRIDOR AND VIEWING GALLERY TO THE DISASSEMBLY BAY. A VIEWING AND WORK STATION FOR THE EAST SIDE OF THE UPPER LEVEL OF THE DISASSEMBLY BAY IS ON THE WEST SIDE OF THE CORRIDOR. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

Computer-Assisted School Maintenance

ERIC Educational Resources Information Center

Kennedy, Mike

2012-01-01

At thousands of schools and universities, years of economic troubles have led to repeated budget cuts. The reductions typically fall disproportionately on maintenance departments, where cuts are viewed as less critical than those that directly affect classroom instruction. And so nearly every facility manager at an education institution faces a…

EVALUATION OF THE IMPLEMENTATION OF ASBESTOS OPERATIONS AND MAINTENANCE PROGRAMS IN NEW JERSEY SCHOOLS

EPA Science Inventory

Removal of asbestos-containing materials (ACM) was encouraged over alternative approaches of asbestos management in the past. However, in-place management and operstions nd maintenance programs are currently viewed by the EPA as the most appropriate overall strategy for managemen...

8. EXTERIOR VIEW TO THE WEST OF THE EAST ELEVATION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. EXTERIOR VIEW TO THE WEST OF THE EAST ELEVATION OF THE HOT DISASSEMBLY AREA. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

2. EXTERIOR VIEW TO THE NORTH OF THE SOUTH ELEVATION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. EXTERIOR VIEW TO THE NORTH OF THE SOUTH ELEVATION OF THE HOT DISASSEMBLY AREA. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

8. VIEW OF E3 WORK STATION WITH MANIPULATOR ARMS IN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. VIEW OF E-3 WORK STATION WITH MANIPULATOR ARMS IN EAST OPERATING GALLERY LOOKING INTO THE HOT BAY. - Nevada Test Site, Engine Maintenance Assembly & Disassembly Facility, Area 25, Jackass Flats, Mercury, Nye County, NV

4. EXTERIOR VIEW TO THE EAST OF THE WEST ELEVATION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. EXTERIOR VIEW TO THE EAST OF THE WEST ELEVATION OF THE COLD ASSEMBLY AREA. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

22. INTERIOR VIEW TO THE SOUTHWEST OF THE LOWER LEVEL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. INTERIOR VIEW TO THE SOUTHWEST OF THE LOWER LEVEL OF ROOM 123, THE DISASSEMBLY BAY. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

21. INTERIOR VIEW TO THE SOUTHEAST OF THE LOWER LEVEL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. INTERIOR VIEW TO THE SOUTHEAST OF THE LOWER LEVEL OF ROOM 123, THE DISASSEMBLY BAY. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

6. EXTERIOR VIEW TO THE SOUTH OF THE NORTH ELEVATION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. EXTERIOR VIEW TO THE SOUTH OF THE NORTH ELEVATION OF THE HOT DISASSEMBLY AREA. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

5. VIEW TO THE SOUTHEAST OF THE HOT BAY AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. VIEW TO THE SOUTHEAST OF THE HOT BAY AND ATTACHED OPERATING GALLERIES ALONG THE WEST SIDE OF THE BAY. - Nevada Test Site, Engine Maintenance Assembly & Disassembly Facility, Area 25, Jackass Flats, Mercury, Nye County, NV

23. INTERIOR VIEW TO THE SOUTHEAST OF THE UPPER SECTION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

23. INTERIOR VIEW TO THE SOUTHEAST OF THE UPPER SECTION OF ROOM 123, THE DISASSEMBLY BAY. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

24. INTERIOR VIEW TO THE SOUTHWEST OF THE UPPER SECTION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

24. INTERIOR VIEW TO THE SOUTHWEST OF THE UPPER SECTION OF ROOM 123, THE DISASSEMBLY BAY. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

37. INTERIOR VIEW TO THE WEST OF ROOM 203, THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

37. INTERIOR VIEW TO THE WEST OF ROOM 203, THE CONTROL ROOM FOR THE DISASSEMBLY BAY. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

View of building 11050 showing south side with modern addition ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of building 11050 showing south side with modern addition on the left and freestanding structure in the center. - Naval Ordnance Test Station Inyokern, China Lake Pilot Plant, Maintenance Shop, C Street, China Lake, Kern County, CA

Interior, building 1205, view to west showing roof truss system, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Interior, building 1205, view to west showing roof truss system, 90 mm lens plus electronic flash fill lighting. - Travis Air Force Base, Readiness Maintenance Hangar, W Street, Air Defense Command Readiness Area, Fairfield, Solano County, CA

Why AD Graduates Choose Their First Jobs.

ERIC Educational Resources Information Center

Smokvina, Gloria J.; Bratt, Ellen M.

Reasons for the job selections of 64 associate degree nursing graduates were examined in a pilot study at Purdue University. The basic research question was whether nursing graduates initially view "maintenance" or motivational factors as more important. Based on Herzberg's theory of motivation, information is provided on maintenance or hygiene…

49 CFR 234.223 - Gate arm.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Gate arm. 234.223 Section 234.223 Transportation... SYSTEMS Maintenance, Inspection, and Testing Maintenance Standards § 234.223 Gate arm. Each gate arm, when... maintained in a condition sufficient to be clearly viewed by approaching highway users. Each gate arm shall...

49 CFR 234.223 - Gate arm.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Gate arm. 234.223 Section 234.223 Transportation... SYSTEMS Maintenance, Inspection, and Testing Maintenance Standards § 234.223 Gate arm. Each gate arm, when... maintained in a condition sufficient to be clearly viewed by approaching highway users. Each gate arm shall...

49 CFR 234.223 - Gate arm.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Gate arm. 234.223 Section 234.223 Transportation... SYSTEMS Maintenance, Inspection, and Testing Maintenance Standards § 234.223 Gate arm. Each gate arm, when... maintained in a condition sufficient to be clearly viewed by approaching highway users. Each gate arm shall...

High-Maintenance Parents--Responding in the Spirit of Partnership.

ERIC Educational Resources Information Center

Gonzalez-Mena, Janet; Stonehouse, Anne

2000-01-01

Defines a high-maintenance parent as one requiring more from the child care organization than the average parent. Suggests six points for choosing response: take a positive nonjudgmental approach; see parent's view; focus on strengths; understand importance of communication and negotiation skills; be respectful; and respect boundaries of your own…

Qualitative study on maintenance management in Moroccan industries

NASA Astrophysics Data System (ADS)

Naji, Amal; El Oumami, Mohamed; Bouksour, Otmane; Beidouri, Zitouni

2018-05-01

Maintenance management is, and has been studied in depth, especially for strategies to be implemented in industry, even though, authors note that there is a gap between literature and management adopted by industries. In this paper, we present a qualitative study in five Moroccan industries to investigate “how maintenance is managed” rather than “how it should be”. The questionnaire utilized for the study consists on semi-structured and open-ended questions. We consider factors and variables related to maintenance management and we explore the relationships between those factors. The original contribution of this paper is to provide a «real view »about maintenance management in Moroccan industries, which could help to improve understanding of barriers to implementing maintenance strategy.

Application of the Delphi technique in healthcare maintenance.

PubMed

Njuangang, Stanley; Liyanage, Champika; Akintoye, Akintola

2017-10-09

Purpose The purpose of this paper is to examine the research design, issues and considerations in the application of the Delphi technique to identify, refine and rate the critical success factors and performance measures in maintenance-associated infections. Design/methodology/approach In-depth literature review through the application of open and axial coding were applied to formulate the interview and research questions. These were used to conduct an exploratory case study of two healthcare maintenance managers, randomly selected from two National Health Service Foundation Trusts in England. The results of exploratory case study provided the rationale for the application of the Delphi technique in this research. The different processes in the application of the Delphi technique in healthcare research are examined thoroughly. Findings This research demonstrates the need to apply and integrate different research methods to enhance the validity of the Delphi technique. The rationale for the application of the Delphi technique in this research is because some healthcare maintenance managers lack knowledge about basic infection control (IC) principles to make hospitals safe for patient care. The result of first round of the Delphi exercise is a useful contribution in its own rights. It identified a number of salient issues and differences in the opinions of the Delphi participants, noticeably between healthcare maintenance managers and members of the infection control team. It also resulted in useful suggestions and comments to improve the quality and presentation of the second- and third-round Delphi instruments. Practical implications This research provides a research methodology that can be adopted by researchers investigating new and emerging issues in the healthcare sector. As this research demonstrates, the Delphi technique is relevant in soliciting expert knowledge and opinion to identify performance measures to control maintenance-associated infections in hospitals. The methodology provided here could be applied by other researchers elsewhere to probe, investigate and generate rich information about new and emerging healthcare research topics. Originality/value The authors demonstrate how different research methods can be integrated to enhance the validity of the Delphi technique. For example, the results of an exploratory case study provided the rationale for the application of the Delphi technique investigating the key performance measures in maintenance-associated infections. The different processes involved in the application of the Delphi technique are also carefully explored and discussed in depth.

78 FR 37 - Approval and Promulgation of Air Quality Implementation Plans; Utah; Maintenance Plan for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-02

... listed in the FOR FURTHER INFORMATION CONTACT section to view the hard copy of the docket. You may view... to illustrate your concerns, and suggest alternatives. g. Explain your views as clearly as possible... years following designation--i.e., until 2014--and must include contingency measures. In May 20, 2005...

26. INTERIOR VIEW TO THE SOUTH OF ROOM 148, A ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

26. INTERIOR VIEW TO THE SOUTH OF ROOM 148, A POST-MORTEM CELL IN THE HOT DISASSEMBLY AREA. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

29. INTERIOR VIEW TO THE EAST OF ROOM 144, A ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

29. INTERIOR VIEW TO THE EAST OF ROOM 144, A POST-MORTEM CELL IN THE HOT DISASSEMBLY AREA. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

10. INTERIOR VIEW TO THE NORTH OF THE HALLWAY WITHIN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. INTERIOR VIEW TO THE NORTH OF THE HALLWAY WITHIN THE ADMINISTRATION PORTION OF THE COLD ASSEMBLY AREA. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

15. INTERIOR VIEW TO THE EAST OF ROOM 102, A ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. INTERIOR VIEW TO THE EAST OF ROOM 102, A MACHINE SHOP ADJACENT TO ASSEMBLY BAY NO. 1. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

Interior detail, view to northnortheast showing support system for roof ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Interior detail, view to north-northeast showing support system for roof truss (typical), 90 mm lens plus electronic flash lighting. - Travis Air Force Base, Readiness Maintenance Hangar, W Street, Air Defense Command Readiness Area, Fairfield, Solano County, CA

3. EXTERIOR NORTH SIDE DETAIL VIEW, FACING SOUTHWEST. THE ROOFLINE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. EXTERIOR NORTH SIDE DETAIL VIEW, FACING SOUTHWEST. THE ROOFLINE CLEARLY SHOWS THE ATTACHMENTS TO THE NORTH (FORMERLY CANOPY 764) AND EAST (FORMERLY BUILDING 13). - NASA Industrial Plant, Maintenance Facility, 12214 Lakewood Boulevard, Downey, Los Angeles County, CA

2. General oblique view of south and east sides showing ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. General oblique view of south and east sides showing boiler room at right - Fort Hood, World War II Temporary Buildings, Company Maintenance Shop & Arms Room, North of Park Avenue at Forty-ninth Street, Killeen, Bell County, TX

Evaluation of artillery equipment maintenance support capability based on grey clustering

NASA Astrophysics Data System (ADS)

Zhai, Mei-jie; Gao, Peng

2017-12-01

This paper, the theory and method of evaluating the capability of equipment maintenance support in China and abroad are studied, from the point of view of the combat task of artillery troops and the strategic attachment in the future military struggle. This paper establishes the framework of the evaluation Index system of the equipment maintenance support capability of the artillery units, and applies the grey clustering method to the evaluation of the equipment maintenance support capability of the artillery units, and finally evaluates the equipment maintenance and support capability of the artillery brigade as an example, and analyzes the evaluation results. This paper finds out the outstanding problems existing in the maintenance and support of military equipment, and puts forward some constructive suggestions, in order to improve the status of military equipment maintenance and support and improve the level of future equipment maintenance.

Crew considerations in the design for Space Station Freedom modules on-orbit maintenance

NASA Technical Reports Server (NTRS)

Stokes, Jack W.; Williams, Katherine A.

1992-01-01

The paper presents an approach to the maintenance process currently planned for the Space Station Freedom modules. In particular, it describes the planned crew interfaces with maintenance items, and the anticipated implications for the crew in performing the interior and exterior maintenance of modules developed by U.S., ESA, and NASDA. Special consideration is given to the maintenance requirements, allocations, and approach; the maintenance design; the Maintenance Workstation; the robotic mechanisms; and the developemnt of maintenance techniques.

VIEW OF LEFT WING AND FUSELAGE FROM TOP LEVEL OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF LEFT WING AND FUSELAGE FROM TOP LEVEL OF TAIL DOCK STAND. LEADING AND TRAILING EDGE FLAPS ARE DOWN; AIELERONS ARE IN NEUTRAL. ENGINE COWLING OFF FOR HEAVY INSPECTION. - Greater Buffalo International Airport, Maintenance Hangar, Buffalo, Erie County, NY

13. VIEW OF EAST OPERATING GALLERY ALONG THE POSTMORTEM CELLS. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. VIEW OF EAST OPERATING GALLERY ALONG THE POST-MORTEM CELLS. A NUMBER OF MANIPULATOR ARMS COVERED WITH PLASTIC ARE ON THE LEFT WALL. - Nevada Test Site, Engine Maintenance Assembly & Disassembly Facility, Area 25, Jackass Flats, Mercury, Nye County, NV

28. INTERIOR VIEW TO THE SOUTHEAST OF ROOMS 133 AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

28. INTERIOR VIEW TO THE SOUTHEAST OF ROOMS 133 AND 134, POST-MORTEM CELLS IN THE HOT DISASSEMBLY AREA. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

16. INTERIOR VIEW TO THE SOUTHEAST OF ROOM 137, A ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

16. INTERIOR VIEW TO THE SOUTHEAST OF ROOM 137, A REACTOR CONTROL LAB ADJACENT TO ASSEMBLY BAY NO. 2. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

19. VIEW TO THE NORTH FROM THE EXTERIOR INTO THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

19. VIEW TO THE NORTH FROM THE EXTERIOR INTO THE INTERIOR OF ROOM 105, THE BOILER ROOM FOR THE BUILDING. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

20. INTERIOR VIEW TO THE EAST OF THE ACCESS RAMP ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. INTERIOR VIEW TO THE EAST OF THE ACCESS RAMP TO THE HOT DISASSEMBLY AREA FROM THE COLD ASSEMBLY AREA. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

18. INTERIOR VIEW TO THE WEST OF ROOM 141, THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. INTERIOR VIEW TO THE WEST OF ROOM 141, THE HVAC EQUIPMENT ROOM FOR COOLING AND HEATING OF THE BUILDING. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

11. INTERIOR VIEW TO THE NORTHEAST OF ROOM 160, AN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. INTERIOR VIEW TO THE NORTHEAST OF ROOM 160, AN OFFICE BY THE MAIN ENTRANCE DOOR OF THE ADMINISTRATION AREA. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

A Teamwork-Oriented Air Traffic Control Simulator

DTIC Science & Technology

2006-06-01

the software development methodology of this work , this chapter is viewed as the acquisition phase of this model. The end of the ...Maintenance phase Changed Verification Retirement Development Maintenance 37 because the different controllers working in these phases usually...traditional operation such as scaling the airport and personalizing the working environment. 4. Pilot Specification The

Internists' Views of Maintenance of Certification: A Stages-of-Change Perspective

ERIC Educational Resources Information Center

Arnold, Gerald K.; Hess, Brian J.; Lipner, Rebecca S.

2013-01-01

Introduction: Board certification has evolved from a "point-in-time" event to a process of periodic learning and reevaluation of medical competence through maintenance of certification (MOC). To better understand MOC participation, the transtheoretical model (TTM) was used to describe physicians' perceptions of MOC as a sequence of…

36. INTERIOR VIEW TO THE NORTHWEST OF THE SECOND FLOOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

36. INTERIOR VIEW TO THE NORTHWEST OF THE SECOND FLOOR CORRIDOR ON THE EAST SIDE OF THE DISASSEMBLY BAY. A VIEWING AND WORK STATION AND ENTRANCE TO THE CONTROL ROOM ARE ON THE WEST SIDE OF THE CORRIDOR. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

77 FR 21512 - Approval, Disapproval and Promulgation of Air Quality Implementation Plan; Utah; Maintenance Plan...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-10

... possible, you contact the individual listed in the FOR FURTHER INFORMATION CONTACT section to view the hard copy of the docket. You may view the hard copy of the docket Monday through Friday, 8 a.m. to 4 p.m... your concerns, and suggest alternatives. g. Explain your views as clearly as possible, avoiding the use...

Development of a Prototype H-46 Helicopter Diagnostic Expert System.

DTIC Science & Technology

1987-09-01

SQUADRON MAINTEN\\NCE: CURRENT PROCESS AND CA D S INTEG R ,ATIO N ........................................ 14 A. MAINTENANCE DATA SYSTEM...increasce the effectiveness of the maintenance process should enhance the ability of achieving :hee objectives. Artificial intelligence techniques offer a...completeiy validated. G. ORGANIZATION OF STUDY Chapter II contains a description of the Naval Aviation Maintenance Program’s Maintenance Data System (MDS

25. INTERIOR VIEW TO THE NORTH OF ROOM 149, THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

25. INTERIOR VIEW TO THE NORTH OF ROOM 149, THE ENTRANCE HALLWAY TO THE POST-MORTEM CELLS IN THE HOT DISASSEMBLY AREA. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

2. VIEW TO THE SOUTHWEST OF THE MAIN EMAD BUILDING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. VIEW TO THE SOUTHWEST OF THE MAIN E-MAD BUILDING WITH THE COLD BAY ON THE EAST (LEFT) AND THE HOT BAY ON THE WEST (RIGHT). - Nevada Test Site, Engine Maintenance Assembly & Disassembly Facility, Area 25, Jackass Flats, Mercury, Nye County, NV

17. INTERIOR VIEW TO THE EAST OF ROOM 215, A ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. INTERIOR VIEW TO THE EAST OF ROOM 215, A SECOND FLOOR OFFICE ABOVE ROOM 137 IN THE COLD ASSEMBLY AREA. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

39. INTERIOR VIEW TO THE NORTH OF A WORK STATION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

39. INTERIOR VIEW TO THE NORTH OF A WORK STATION WITH MANIPULATOR ARMS IN THE SOUTH CORRIDOR OF THE SECOND FLOOR. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

65. VIEW OF EAST LORING LAKE LOOKING NORTHWEST FROM DAM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

65. VIEW OF EAST LORING LAKE LOOKING NORTHWEST FROM DAM NEAR BUILDING 361 (MUNITIONS MAINTENANCE SQUADRON ADMINISTRATION BUILDING) IN BASE SPARES AREA. - Loring Air Force Base, Weapons Storage Area, Northeastern corner of base at northern end of Maine Road, Limestone, Aroostook County, ME

Working Memory Replay Prioritizes Weakly Attended Events.

PubMed

Jafarpour, Anna; Penny, Will; Barnes, Gareth; Knight, Robert T; Duzel, Emrah

2017-01-01

One view of working memory posits that maintaining a series of events requires their sequential and equal mnemonic replay. Another view is that the content of working memory maintenance is prioritized by attention. We decoded the dynamics for retaining a sequence of items using magnetoencephalography, wherein participants encoded sequences of three stimuli depicting a face, a manufactured object, or a natural item and maintained them in working memory for 5000 ms. Memory for sequence position and stimulus details were probed at the end of the maintenance period. Decoding of brain activity revealed that one of the three stimuli dominated maintenance independent of its sequence position or category; and memory was enhanced for the selectively replayed stimulus. Analysis of event-related responses during the encoding of the sequence showed that the selectively replayed stimuli were determined by the degree of attention at encoding. The selectively replayed stimuli had the weakest initial encoding indexed by weaker visual attention signals at encoding. These findings do not rule out sequential mnemonic replay but reveal that attention influences the content of working memory maintenance by prioritizing replay of weakly encoded events. We propose that the prioritization of weakly encoded stimuli protects them from interference during the maintenance period, whereas the more strongly encoded stimuli can be retrieved from long-term memory at the end of the delay period.

A Study on a Prognosis Algorithm for PEMFC Lifetime Prediction based on Durability Tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Xian; Pisu, Pierluigi; Toops, Todd J

2010-01-01

Of the fuel cells being studied, the proton exchange membrane fuel cell (PEMFC) is viewed as the most promising for transportation. Yet until today, the commercialization of the PEMFC has not been widespread in spite of its large expectation. Poor long term performances or durability, and high production and maintenance costs account for the main reasons. For the final commercialization of fuel cell in transportation field, the durability issue must be addressed, while the costs should be further brought down. In the meantime, health-monitoring and prognosis techniques are of great significance in ensuring the normal operation of the fuel cellmore » and preventing or predicting its likely abrupt and catastrophic failure.« less

Best practices handbook on asphalt pavement maintenance

DOT National Transportation Integrated Search

2000-02-01

The purpose of this handbook is to provide background information about the importance of pavement preservation and preventive maintenance, as well as present maintenance techniques for a variety of distresses and conditions. The major focus of this ...

User's Guide for a Computerized Track Maintenance Simulation Cost Methodology

DOT National Transportation Integrated Search

1982-02-01

This User's Guide describes the simulation cost modeling technique developed for costing of maintenance operations of track and its component structures. The procedure discussed provides for separate maintenance cost entries to be associated with def...

Language Usage and Culture Maintenance: A Study of Spanish-Speaking Immigrant Mothers in Australia

ERIC Educational Resources Information Center

Mejía, Glenda

2016-01-01

This article discusses the usage of the Spanish language by Hispanic mothers with their children, their views on language maintenance and culture within their bilingual families and their opinions on the benefits of bilingualism in a globalised world. Drawing upon detailed case studies of 16 native Spanish-speaking mothers married to…

Heritage Language Maintenance and Education in the Greek Sociolinguistic Context: Albanian Immigrant Parents' Views

ERIC Educational Resources Information Center

Gkaintartzi, Anastasia; Kiliari, Angeliki; Tsokalidou, Roula

2016-01-01

This paper presents data from two studies--a nationwide quantitative research and an ethnographic study--on immigrant parents' perspectives about heritage language maintenance and education in Greek state schools. The quantitative data come from a large-scale questionnaire survey, which aimed at the investigation of the needs and requirements for…

Zen and the Art of Higher Education Maintenance: Bridging Classic and Romantic Notions of Quality.

ERIC Educational Resources Information Center

Shields, Patricia M.

Uses Robert Pirsig's ideas in "Zen and the Art of Motorcycle Maintenance" to explore two ways of viewing quality in higher education: the romantic and the classic. Analyzes historical and contemporary literature on quality using insights of Alfred Whitehead, Pirsig, and John Dewey, urging a vision that is honest and that incorporates…

30. INTERIOR VIEW TO THE NORTH OF THE WEST CORRIDOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

30. INTERIOR VIEW TO THE NORTH OF THE WEST CORRIDOR OF THE BASEMENT IN THE HOT DISASSEMBLY AREA. ELECTRIC MOTORS LINE THE WEST WALL. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

Maintenance measures for preservation and recovery of permeable pavement surface infiltration rate--The effects of street sweeping, vacuum cleaning, high pressure washing, and milling.

PubMed

Winston, Ryan J; Al-Rubaei, Ahmed M; Blecken, Godecke T; Viklander, Maria; Hunt, William F

2016-03-15

The surface infiltration rates (SIR) of permeable pavements decline with time as sediment and debris clog pore spaces. Effective maintenance techniques are needed to ensure the hydraulic functionality and water quality benefits of this stormwater control. Eight different small-scale and full-scale maintenance techniques aimed at recovering pavement permeability were evaluated at ten different permeable pavement sites in the USA and Sweden. Maintenance techniques included manual removal of the upper 2 cm of fill material, mechanical street sweeping, regenerative-air street sweeping, vacuum street sweeping, hand-held vacuuming, high pressure washing, and milling of porous asphalt. The removal of the upper 2 cm of clogging material did not significantly improve the SIR of concrete grid paves (CGP) and permeable interlocking concrete pavers (PICP) due to the inclusion of fines in the joint and bedding stone during construction, suggesting routine maintenance cannot overcome improper construction. For porous asphalt maintenance, industrial hand-held vacuum cleaning, pressure washing, and milling were increasingly successful at recovering the SIR. Milling to a depth of 2.5 cm nearly restored the SIR for a 21-year old porous asphalt pavement to like-new conditions. For PICP, street sweepers employing suction were shown to be preferable to mechanical sweepers; additionally, maintenance efforts may become more intensive over time to maintain a threshold SIR, as maintenance was not 100% effective at removing clogging material. Copyright © 2015 Elsevier Ltd. All rights reserved.

Beyond reliability to profitability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bond, T.H.; Mitchell, J.S.

1996-07-01

Reliability concerns have controlled much of power generation design and operations. Emerging from a strictly regulated environment, profitability is becoming a much more important concept for today`s power generation executives. This paper discusses the conceptual advance-view power plant maintenance as a profit center, go beyond reliability, and embrace profitability. Profit Centered Maintenance begins with the premise that financial considerations, namely profitability, drive most aspects of modern process and manufacturing operations. Profit Centered Maintenance is a continuous process of reliability and administrative improvement and optimization. For the power generation executives with troublesome maintenance programs, Profit Centered Maintenance can be the blueprintmore » to increased profitability. It requires the culture change to make decisions based on value, to reengineer the administration of maintenance, and to enable the people performing and administering maintenance to make the most of available maintenance information technology. The key steps are to optimize the physical function of maintenance and to resolve recurring maintenance problems so that the need for maintenance can be reduced. Profit Centered Maintenance is more than just an attitude it is a path to profitability, be it resulting in increased profits or increased market share.« less

4. VIEW TO THE NORTHWEST OF THE COLD BAY ON ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. VIEW TO THE NORTHWEST OF THE COLD BAY ON THE NORTH (RIGHT) AND THE POST-MORTEM CELLS ON THE SOUTH (LEFT). ALSO ILLUSTRATED ARE THE DIFFERENT ROOF HEIGHTS OF THE BUILDING. - Nevada Test Site, Engine Maintenance Assembly & Disassembly Facility, Area 25, Jackass Flats, Mercury, Nye County, NV

5. EXTERIOR VIEW TO THE SOUTHEAST OF THE NORTH AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. EXTERIOR VIEW TO THE SOUTHEAST OF THE NORTH AND WEST ELEVATIONS, WITH THE COLD ASSEMBLY AREA TO THE RIGHT AND THE HOT DISASSEMBLY AREA TO THE LEFT. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

12. INTERIOR VIEW TO THE NORTH OF THE RESTROOM AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. INTERIOR VIEW TO THE NORTH OF THE RESTROOM AND UTILITY ROOM AT THE NORTH END OF THE MAIN ENTRANCE HALLWAY OF THE ADMINISTRATION AREA. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

3. EXTERIOR VIEW TO THE NORTH OF THE SOUTH ELEVATION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. EXTERIOR VIEW TO THE NORTH OF THE SOUTH ELEVATION OF THE ADMINISTRATION AREA IN THE COLD ASSEMBLY AREA, WITH THE MAIN ENTRANCE 'KENNEDY DOORS' IN THE MIDDLE. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

VIEW OF BOEING 737200 FUSELAGE FROM TOP LEVEL OF TAIL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF BOEING 737-200 FUSELAGE FROM TOP LEVEL OF TAIL DOCK AND. A NEW SAFETY CABLE FROM THE TAIL DOCK WILL ALLOW INSPECTORS TO WALK UP AND DOWN THE FUSELAGE TO CHECK FOR CRACKS OR MISSING FASTENERS. - Greater Buffalo International Airport, Maintenance Hangar, Buffalo, Erie County, NY

5. EXTERIOR SOUTHEAST CORNER VIEW, FACING NORTHWEST. EXTENSIONS TO BUILDING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. EXTERIOR SOUTHEAST CORNER VIEW, FACING NORTHWEST. EXTENSIONS TO BUILDING 13 CLEARLY VISIBLE. ROM LEFT TO RIGHT, FORMER BUILDING 13, ADDITION WITH LARGE ROLL-UP DOOR, CANOPY 723. BUILDING 42 VISIBLE IN PERSPECTIVE LINE. - NASA Industrial Plant, Maintenance Facility, 12214 Lakewood Boulevard, Downey, Los Angeles County, CA

7. Close view of Building 1927 looking southeast (to show ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. Close view of Building 1927 looking southeast (to show what Building 1928 would look like without vehicles parked in its bays) - Fort Hood, World War II Temporary Buildings, Company Maintenance Shop & Arms Room, North of Park Avenue at Forty-ninth Street, Killeen, Bell County, TX

Crew interface specifications development for inflight maintenance and stowage functions

NASA Technical Reports Server (NTRS)

Carl, J. G.

1974-01-01

Findings and data products developed during crew specification study for inflight maintenance and stowage functions are reported. From this information base, a family of data concepts to support crew inflight troubleshooting and corrective maintenance activities was developed and specified. Recommendations are made for the improvement of inflight maintenance planning, preparations and operations in future space flight programs through the establishment of an inflight maintenance organization and specific suggestions for techniques to improve the management of the inflight maintenance function.

Occupational Analysis Technology: Expanded Role in Development of Cost-Effective Maintenance Systems. Final Report.

ERIC Educational Resources Information Center

Foley, John P., Jr.

A study was conducted to refine and coordinate occupational analysis, job performance aids, and elements of the instructional systems development process for task specific Air Force maintenance training. Techniques for task identification and analysis (TI & A) and data gathering techniques for occupational analysis were related. While TI &…

DETAIL OF UNDERSIDE OF RIGHT WING. AFTER DOCKING, THE FIRST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL OF UNDERSIDE OF RIGHT WING. AFTER DOCKING, THE FIRST STEP IN MAINTENANCE IS TO OPEN UP THOSE AREAS OF THE AIRCRAFT THAT REQUIRE SERVICING. IN THIS VIEW WING SLATS, KRUGER FLAPS, AND TRAILING EDGE FLAPS ARE ALL DOWN; THRUST REVERSERS ARE IN THE OPEN POSITION; ENGINE COWLING IS OPEN. - Greater Buffalo International Airport, Maintenance Hangar, Buffalo, Erie County, NY

14 CFR Appendix A to Part 33 - Instructions for Continued Airworthiness

Code of Federal Regulations, 2013 CFR

2013-01-01

... degree of complexity requiring specialized maintenance techniques, test equipment, or expertise. The... Limitations section must also prescribe the mandatory post-flight inspections and maintenance actions... adequacy of the instructions for mandatory post-flight inspections and maintenance actions prescribed under...

14 CFR Appendix A to Part 33 - Instructions for Continued Airworthiness

Code of Federal Regulations, 2014 CFR

2014-01-01

... degree of complexity requiring specialized maintenance techniques, test equipment, or expertise. The... Limitations section must also prescribe the mandatory post-flight inspections and maintenance actions... adequacy of the instructions for mandatory post-flight inspections and maintenance actions prescribed under...

14 CFR Appendix A to Part 33 - Instructions for Continued Airworthiness

Code of Federal Regulations, 2010 CFR

2010-01-01

... degree of complexity requiring specialized maintenance techniques, test equipment, or expertise. The... Limitations section must also prescribe the mandatory post-flight inspections and maintenance actions... adequacy of the instructions for mandatory post-flight inspections and maintenance actions prescribed under...

Gamma Activation in Young People with Autism Spectrum Disorders and Typically-Developing Controls When Viewing Emotions on Faces

PubMed Central

Wright, Barry; Alderson-Day, Ben; Prendergast, Garreth; Bennett, Sophie; Jordan, Jo; Whitton, Clare; Gouws, Andre; Jones, Nick; Attur, Ram; Tomlinson, Heather; Green, Gary

2012-01-01

Background Behavioural studies have highlighted irregularities in recognition of facial affect in children and young people with autism spectrum disorders (ASDs). Recent findings from studies utilising electroencephalography (EEG) and magnetoencephalography (MEG) have identified abnormal activation and irregular maintenance of gamma (>30 Hz) range oscillations when ASD individuals attempt basic visual and auditory tasks. Methodology/Principal Fndings The pilot study reported here is the first study to use spatial filtering techniques in MEG to explore face processing in children with ASD. We set out to examine theoretical suggestions that gamma activation underlying face processing may be different in a group of children and young people with ASD (n = 13) compared to typically developing (TD) age, gender and IQ matched controls. Beamforming and virtual electrode techniques were used to assess spatially localised induced and evoked activity. While lower-band (3–30 Hz) responses to faces were similar between groups, the ASD gamma response in occipital areas was observed to be largely absent when viewing emotions on faces. Virtual electrode analysis indicated the presence of intact evoked responses but abnormal induced activity in ASD participants. Conclusions/Significance These findings lend weight to previous suggestions that specific components of the early visual response to emotional faces is abnormal in ASD. Elucidation of the nature and specificity of these findings is worthy of further research. PMID:22859975

Maintenance = reuse-oriented software development

NASA Technical Reports Server (NTRS)

Basili, Victor R.

1989-01-01

Maintenance is viewed as a reuse process. In this context, a set of models that can be used to support the maintenance process is discussed. A high level reuse framework is presented that characterizes the object of reuse, the process for adapting that object for its target application, and the reused object within its target application. Based upon this framework, a qualitative comparison is offered of the three maintenance process models with regard to their strengths and weaknesses and the circumstances in which they are appropriate. To provide a more systematic, quantitative approach for evaluating the appropriateness of the particular maintenance model, a measurement scheme is provided, based upon the reuse framework, in the form of an organized set of questions that need to be answered. To support the reuse perspective, a set of reuse enablers are discussed.

Working Memory Replay Prioritizes Weakly Attended Events

PubMed Central

Penny, Will; Knight, Robert T.; Duzel, Emrah

2017-01-01

Abstract One view of working memory posits that maintaining a series of events requires their sequential and equal mnemonic replay. Another view is that the content of working memory maintenance is prioritized by attention. We decoded the dynamics for retaining a sequence of items using magnetoencephalography, wherein participants encoded sequences of three stimuli depicting a face, a manufactured object, or a natural item and maintained them in working memory for 5000 ms. Memory for sequence position and stimulus details were probed at the end of the maintenance period. Decoding of brain activity revealed that one of the three stimuli dominated maintenance independent of its sequence position or category; and memory was enhanced for the selectively replayed stimulus. Analysis of event-related responses during the encoding of the sequence showed that the selectively replayed stimuli were determined by the degree of attention at encoding. The selectively replayed stimuli had the weakest initial encoding indexed by weaker visual attention signals at encoding. These findings do not rule out sequential mnemonic replay but reveal that attention influences the content of working memory maintenance by prioritizing replay of weakly encoded events. We propose that the prioritization of weakly encoded stimuli protects them from interference during the maintenance period, whereas the more strongly encoded stimuli can be retrieved from long-term memory at the end of the delay period. PMID:28824955

TIGER TM : Intelligent continuous monitoring of gas turbines

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKay, I.; Hibbert, J.; Milne, R.

1998-07-01

The field of condition monitoring has been an area of rapid growth, with many specialized techniques being developed to measure or predict the health of a particular item of plant. Much of the most recent work has gone into the diagnosis of problems on rotating machines through the application of vibration analysis techniques. These techniques though useful can have a number of limiting factors, such as the need to install specialized sensors and measurement equipment, or the limited scope of the type of data measured. It was recognized in 1992, that the surveillance and condition monitoring procedures available for criticalmore » plant, such as gas turbines, were not as comprehensive as they might be and that a novel approach was required to give the operator the necessary holistic view of the health of the plant. This would naturally provide an assessment of the maintenance practices required to yield the highest possible availability without the need to install extensive new instrumentation. From the above objective, the TIGER system was designed which utilizes available data from the gas turbine control system or additionally the plant DCS to measure the behavior of the gas turbine and its associated sub systems. These measured parameters are then compared with an internal model of the turbine system and used to diagnose incorrect responses and therefore the item that is at fault, allowing the operator to quickly restart the turbine after a trip or perform condition based maintenance at the next scheduled outage. This philosophy has been built into the TIGER system and the purpose of this paper is to illustrate its functionality and some of the innovative techniques used in the diagnosis of real gas turbine problems. This is achieved by discussing three case studies where TIGER was integral in returning the plant to operation more quickly than can normally be expected.« less

Mining Index - Div. of Mining, Land, and Water

Science.gov Websites

(Public Land Title) Surveys, Easements and Plats Water Aquatic Farming Dam Safety Navigability Shore Regulations (11 AAC 86) May 3, 2018 Related documents and instructions for public comment are available on our Exploration, Maintenance and Reclamation #6118 and Supporting Documents. View PDF View Page Pogo Mine Public

1. EXTERIOR VIEW TO THE NORTH OF THE SOUTH ELEVATIONS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. EXTERIOR VIEW TO THE NORTH OF THE SOUTH ELEVATIONS OF THE R-MAD FACILITY WITH THE COLD ASSEMBLY AREA ON THE LEFT AND THE HOT DISASSEMBLY AREA TO THE RIGHT. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

VIEW OF LOCATION OF CHILDS POWER PLANT (SHOWING POWERHOUSE AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF LOCATION OF CHILDS POWER PLANT (SHOWING POWERHOUSE AND TRANSFORMER FRAMEWORK AT LEFT, BELOW POWER LINES AND THE MAINTENANCE AND RESIDENTIAL COMPOUND UPSTREAM TO RIGHT) ALONG VERDE RIVER FROM FS ROAD #502. LOOKING UPSTREAM (WEST-SOUTHWEST) - Childs-Irving Hydroelectric Project, Forest Service Road 708/502, Camp Verde, Yavapai County, AZ

6. INTERIOR VIEW TO THE EAST OF SOUTHEAST CORNER OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. INTERIOR VIEW TO THE EAST OF SOUTHEAST CORNER OF THE HOT BAY. A LARGE MANIPULATOR ARM AND HORIZONTAL TRACKING SYSTEM IS SHOWN ABOVE SMALLER MANIPULATOR ARM WORK STATIONS. ASSOCIATED WITH THE WORK STATIONS ARE OBSERVATION WINDOWS. - Nevada Test Site, Engine Maintenance Assembly & Disassembly Facility, Area 25, Jackass Flats, Mercury, Nye County, NV

Interior, building 1205, view to southeast showing roof truss system, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Interior, building 1205, view to southeast showing roof truss system, sliding main doors, and roll up door at center to allow clearance for aircraft tail assembly, 90 mm lens plus electronic flash fill lighting. - Travis Air Force Base, Readiness Maintenance Hangar, W Street, Air Defense Command Readiness Area, Fairfield, Solano County, CA

VIEW OF THE DISPATCH OFFICE IN BUILDING 331. ALL SITEWIDE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF THE DISPATCH OFFICE IN BUILDING 331. ALL SITE-WIDE FIRE ALARM SIGNALS, INCLUDING ALL FIRE PHONES, FIRE PULL BOXES, HEAT AND SMOKE DETECTORS, AND SUPPRESSION SYSTEM FLOW ALARMS, ARE TRANSMITTED TO THE BUILDING 331 DISPATCHER'S OFFICE. (3/77) - Rocky Flats Plant, Vehicle Maintenance Garage & Fire Station, Golden, Jefferson County, CO

Vehicle Maintenance Manpower Requirements for U.S. Army Installation Directorates of Engineering and Housing Based on Air Force, Navy, and Army Reserves’ Staffing Techniques.

DTIC Science & Technology

1986-07-01

Reserves staffing. A comparison with the Navy technique, which requires estimates of mileage and operating hours, was not possible since these data were...Directorate of Engineering and Housing (DEH) vehicle maintenance activities. To make comparisons, manpower requirements data totaling two megabytes of

Implementing a Reliability Centered Maintenance Program at NASA's Kennedy Space Center

NASA Technical Reports Server (NTRS)

Tuttle, Raymond E.; Pete, Robert R.

1998-01-01

Maintenance practices have long focused on time based "preventive maintenance" techniques. Components were changed out and parts replaced based on how long they had been in place instead of what condition they were in. A reliability centered maintenance (RCM) program seeks to offer equal or greater reliability at decreased cost by insuring only applicable, effective maintenance is performed and by in large part replacing time based maintenance with condition based maintenance. A significant portion of this program involved introducing non-intrusive technologies, such as vibration analysis, oil analysis and I/R cameras, to an existing labor force and management team.

Structural methodologies for auditing SNOMED.

PubMed

Wang, Yue; Halper, Michael; Min, Hua; Perl, Yehoshua; Chen, Yan; Spackman, Kent A

2007-10-01

SNOMED is one of the leading health care terminologies being used worldwide. As such, quality assurance is an important part of its maintenance cycle. Methodologies for auditing SNOMED based on structural aspects of its organization are presented. In particular, automated techniques for partitioning SNOMED into smaller groups of concepts based primarily on relationships patterns are defined. Two abstraction networks, the area taxonomy and p-area taxonomy, are derived from the partitions. The high-level views afforded by these abstraction networks form the basis for systematic auditing. The networks tend to highlight errors that manifest themselves as irregularities at the abstract level. They also support group-based auditing, where sets of purportedly similar concepts are focused on for review. The auditing methodologies are demonstrated on one of SNOMED's top-level hierarchies. Errors discovered during the auditing process are reported.

Protein Solubility and Protein Homeostasis: A Generic View of Protein Misfolding Disorders

PubMed Central

Vendruscolo, Michele; Knowles, Tuomas P.J.; Dobson, Christopher M.

2011-01-01

According to the “generic view” of protein aggregation, the ability to self-assemble into stable and highly organized structures such as amyloid fibrils is not an unusual feature exhibited by a small group of peptides and proteins with special sequence or structural properties, but rather a property shared by most proteins. At the same time, through a wide variety of techniques, many of which were originally devised for applications in other disciplines, it has also been established that the maintenance of proteins in a soluble state is a fundamental aspect of protein homeostasis. Taken together, these advances offer a unified framework for understanding the molecular basis of protein aggregation and for the rational development of therapeutic strategies based on the biological and chemical regulation of protein solubility. PMID:21825020

Vibro-acoustic condition monitoring of Internal Combustion Engines: A critical review of existing techniques

NASA Astrophysics Data System (ADS)

Delvecchio, S.; Bonfiglio, P.; Pompoli, F.

2018-01-01

This paper deals with the state-of-the-art strategies and techniques based on vibro-acoustic signals that can monitor and diagnose malfunctions in Internal Combustion Engines (ICEs) under both test bench and vehicle operating conditions. Over recent years, several authors have summarized what is known in critical reviews mainly focused on reciprocating machines in general or on specific signal processing techniques: no attempts to deal with IC engine condition monitoring have been made. This paper first gives a brief summary of the generation of sound and vibration in ICEs in order to place further discussion on fault vibro-acoustic diagnosis in context. An overview of the monitoring and diagnostic techniques described in literature using both vibration and acoustic signals is also provided. Different faulty conditions are described which affect combustion, mechanics and the aerodynamics of ICEs. The importance of measuring acoustic signals, as opposed to vibration signals, is due since the former seem to be more suitable for implementation on on-board monitoring systems in view of their non-intrusive behaviour, capability in simultaneously capturing signatures from several mechanical components and because of the possibility of detecting faults affecting airborne transmission paths. In view of the recent needs of the industry to (-) optimize component structural durability adopting long-life cycles, (-) verify the engine final status at the end of the assembly line and (-) reduce the maintenance costs monitoring the ICE life during vehicle operations, monitoring and diagnosing system requests are continuously growing up. The present review can be considered a useful guideline for test engineers in understanding which types of fault can be diagnosed by using vibro-acoustic signals in sufficient time in both test bench and operating conditions and which transducer and signal processing technique (of which the essential background theory is here reported) could be considered the most reliable and informative to be implemented for the fault in question.

Inspection and maintenance techniques for the Algeria-Italy trans-Mediterranean pipeline

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bensalem, M.T.

1986-07-01

Inspection and maintenance of the three 155-km trans-Mediterranean sections of the Algeria-Italy natural-gas pipeline has been carried out by Transmediterranean Pipeline Co./TMPC (a joint venture between Sonatrach and SNAM). The inspection philosophy of TMPC has been to employ the most conservative, although more costly, approaches and state-of-the-art surveying techniques.

Refurbishment cost study of the thermal protection system of a space shuttle vehicle, phase 2

NASA Technical Reports Server (NTRS)

Haas, D. W.

1972-01-01

The labor costs and techniques associated with the refurbishment and maintenance of representative thermal protection system (TPS) components and their attachment concepts suitable for space shuttle application are defined, characterized, and evaluated from the results of an experimental test program. This program consisted of designing selected TPS concepts, fabricating and assembling test hardware, and performing a time and motion study of specific maintenance functions of the test hardware on a full-scale- mockup. Labor requirements and refurbishment techniques, as they relate to the maintenance functions of inspection, repair, removal, and replacement were identified.

17. Photocopy of photograph. VIEW OF WORKERS IN EAST OPERATING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. Photocopy of photograph. VIEW OF WORKERS IN EAST OPERATING GALLERY USING MANIPULATOR ARMS AT STATION E-108. Photographer unknown, ca. 1965, original photograph and negative on file at the Remote Sensing Laboratory, Department of Energy, Nevada Operations Office. - Nevada Test Site, Engine Maintenance Assembly & Disassembly Facility, Area 25, Jackass Flats, Mercury, Nye County, NV

Cultural Dimensions of Indigenous Participation in Education and Training. NCVER Monograph Series 02/2009

ERIC Educational Resources Information Center

Dockery, Alfred Michael

2009-01-01

The preservation of Indigenous cultures is a controversial issue in Australia. On the one hand, the maintenance of traditional Indigenous culture has been viewed as a barrier to integration with mainstream society and the achievement of socio-economic equality between Indigenous and non-Indigenous Australians. An alternative view sees maintenance…

78 FR 41752 - Approval and Promulgation of Air Quality Implementation Plans; Ohio; Redesignation of the Ohio...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-11

... specific examples to illustrate your concerns, and suggest alternatives. 7. Explain your views as clearly... requirement to submit the section 172(c)(9) contingency measures is not applicable for purposes of... demonstrates maintenance of the NAAQS without part D NSR. A detailed rationale for this view is described in a...

78 FR 48087 - Approval and Promulgation of Air Quality Implementation Plans; Ohio; Redesignation of the Canton...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-07

... specific examples to illustrate your concerns, and suggest alternatives. 7. Explain your views as clearly... 172(c)(9) contingency measures is not applicable for purposes of redesignation. Id. Section 172(c)(3... area demonstrates maintenance of the NAAQS without part D NSR. A detailed rationale for this view is...

A quantitative comparison of corrective and perfective maintenance

NASA Technical Reports Server (NTRS)

Henry, Joel; Cain, James

1994-01-01

This paper presents a quantitative comparison of corrective and perfective software maintenance activities. The comparison utilizes basic data collected throughout the maintenance process. The data collected are extensive and allow the impact of both types of maintenance to be quantitatively evaluated and compared. Basic statistical techniques test relationships between and among process and product data. The results show interesting similarities and important differences in both process and product characteristics.

Establishment and Maintenance of Socially Learned Conditioned Reinforcement in Young Children: Elimination of the Role of Adults and View of Peers' Faces

ERIC Educational Resources Information Center

Zrinzo, Michelle; Greer, R. Douglas

2013-01-01

Prior research has demonstrated the establishment of reinforcers for learning and maintenance with young children as a function of social learning where a peer and an adult experimenter were present. The presence of an adult experimenter was eliminated in the present study to test if the effect produced in the prior studies would occur with only…

Managing Custodial and Maintenance Staffs.

ERIC Educational Resources Information Center

Fickes, Michael

2001-01-01

Presents some basic maintenance management techniques that can help schools meet their budgets, preserve staffing levels, meet productivity needs, and sustain quality services. Tips for staff recruitment, training, and retention are explored. (GR)

Runways at small airports are deteriorating because of deferred maintenance: Action needed by FAA and the Congress

NASA Astrophysics Data System (ADS)

1982-09-01

Runways at many small airports are deteriorating faster than necessary because airport owners--usually local governments--have deferred critical maintenance. The result is damage to the runways' basic structure and a shortened useful life if they are not repaired. Based on GAO's review of 46 airports, studies by others, and the views of FAA officials, deferred maintenance is apparently a longstanding nationwide problem. Lack of funds is cited by airport owners as the primary reason for not performing needed maintenance; however, the Federal Aviation Administration's apathy to bring about satisfactory maintenance is a contributing cause. GAO is recommending actions that FAA can take to help ensure that runways at small airports are properly maintained. The Congress should recognize the airport owners' lack of resources to properly maintain airports when considering future revisions to the Airport Improvement Program.

18. Photocopy of photograph. VIEW WITHIN POSTMORTEM CELL OF MANIPULATOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. Photocopy of photograph. VIEW WITHIN POST-MORTEM CELL OF MANIPULATOR ARMS BEING USED TO MOVE METAL BARS FROM ONE LOCATION TO ANOTHER. Photographer unknown, ca. 1965, original photograph and negative on file at the Remote Sensing Laboratory, Department of Energy, Nevada Operations Office. - Nevada Test Site, Engine Maintenance Assembly & Disassembly Facility, Area 25, Jackass Flats, Mercury, Nye County, NV

19. Photocopy of photograph. VIEW OF WORKER MANIPULATING SMALL GLASS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

19. Photocopy of photograph. VIEW OF WORKER MANIPULATING SMALL GLASS OBJECTS IN THE HOT BAY WITH MANIPULATOR ARMS AT WORK STATION E-2. Photographer unknown, ca. 1969, original photograph and negative on file at the Remote Sensing Laboratory, Department of Energy, Nevada Operations Office. - Nevada Test Site, Engine Maintenance Assembly & Disassembly Facility, Area 25, Jackass Flats, Mercury, Nye County, NV

4. VIEW LOOKING WEST DOWN CENTRAL AVENUE AT THE INTERSECTION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. VIEW LOOKING WEST DOWN CENTRAL AVENUE AT THE INTERSECTION WITH SEVENTH STREET. THE PLANT HAS MOST OF THE AMENITIES OF A SMALL TOWN - WATER SUPPLY, WASTE WATER TREATMENT, POLICE FORCE, FIRE DEPARTMENT, FOOD SERVICES, HOSPITAL, COMMUNICATIONS NETWORK, STEAM GENERATION, VEHICLE MAINTENANCE, TRANSPORTATION, AND A GOVERNMENT. - Rocky Flats Plant, Bounded by Indiana Street & Routes 93, 128 & 72, Golden, Jefferson County, CO

Gender Differences in Views about Cognitive Health and Healthy Lifestyle Behaviors among Rural Older Adults

ERIC Educational Resources Information Center

Wu, Bei; Goins, R. Turner; Laditka, James N.; Ignatenko, Valerie; Goedereis, Eric

2009-01-01

Purpose: Research suggests that men and women often differ in knowledge and beliefs about causes and treatments of a variety of diseases. This study examines gender differences in views about cognitive health and behaviors that have been associated with its maintenance, focusing on older adults living in rural areas. Design and Methods: We…

1. Perspective view of east and south elevations of Riverdale ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Perspective view of east and south elevations of Riverdale Cotton Mill. The spinning room is located on the third floor, carding room on second floor and machine/maintenance shop on first floor. South elevation of Georgia Power powerhouse adjacent to Riverdale Mill appears on right. - Riverdale Cotton Mill, Corner of Middle & Lower Streets, Valley, Chambers County, AL

Attitude Determination and Control System (ADCS) and Maintenance and Diagnostic System (MDS): A maintenance and diagnostic system for Space Station Freedom

NASA Technical Reports Server (NTRS)

Toms, David; Hadden, George D.; Harrington, Jim

1990-01-01

The Maintenance and Diagnostic System (MDS) that is being developed at Honeywell to enhance the Fault Detection Isolation and Recovery system (FDIR) for the Attitude Determination and Control System on Space Station Freedom is described. The MDS demonstrates ways that AI-based techniques can be used to improve the maintainability and safety of the Station by helping to resolve fault anomalies that cannot be fully determined by built-in-test, by providing predictive maintenance capabilities, and by providing expert maintenance assistance. The MDS will address the problems associated with reasoning about dynamic, continuous information versus only about static data, the concerns of porting software based on AI techniques to embedded targets, and the difficulties associated with real-time response. An initial prototype was built of the MDS. The prototype executes on Sun and IBM PS/2 hardware and is implemented in the Common Lisp; further work will evaluate its functionality and develop mechanisms to port the code to Ada.

[Applying the clustering technique for characterising maintenance outsourcing].

PubMed

Cruz, Antonio M; Usaquén-Perilla, Sandra P; Vanegas-Pabón, Nidia N; Lopera, Carolina

2010-06-01

Using clustering techniques for characterising companies providing health institutions with maintenance services. The study analysed seven pilot areas' equipment inventory (264 medical devices). Clustering techniques were applied using 26 variables. Response time (RT), operation duration (OD), availability and turnaround time (TAT) were amongst the most significant ones. Average biomedical equipment obsolescence value was 0.78. Four service provider clusters were identified: clusters 1 and 3 had better performance, lower TAT, RT and DR values (56 % of the providers coded O, L, C, B, I, S, H, F and G, had 1 to 4 day TAT values:

Space shuttle recommendations based on aircraft maintenance experience

NASA Technical Reports Server (NTRS)

Spears, J. M.; Fox, C. L.

1972-01-01

Space shuttle design recommendations based on aircraft maintenance experience are developed. The recommendations are specifically applied to the landing gear system, nondestructive inspection techniques, hydraulic system design, materials and processes, and program support.

Wind Turbine Bearing Diagnostics Based on Vibration Monitoring

NASA Astrophysics Data System (ADS)

Kadhim, H. T.; Mahmood, F. H.; Resen, A. K.

2018-05-01

Reliability maintenance can be considered as an accurate condition monitoring system which increasing beneficial and decreasing the cost production of wind energy. Supporting low friction of wind turbine rotating shaft is the main task of rolling element bearing and it is the main part that suffers from failure. The rolling failures elements have an economic impact and may lead to malfunctions and catastrophic failures. This paper concentrates on the vibration monitoring as a Non-Destructive Technique for assessing and demonstrates the feasibility of vibration monitoring for small wind turbine bearing defects based on LabVIEW software. Many bearings defects were created, such as inner race defect, outer race defect, and ball spin defect. The spectra data were recorded and compared with the theoretical results. The accelerometer with 4331 NI USB DAQ was utilized to acquiring, analyzed, and recorded. The experimental results were showed the vibration technique is suitable for diagnostic the defects that will be occurred in the small wind turbine bearings and developing a fault in the bearing which leads to increasing the vibration amplitude or peaks in the spectrum.

Clinical Study of Orthogonal-View Phase-Matched Digital Tomosynthesis for Lung Tumor Localization.

PubMed

Zhang, You; Ren, Lei; Vergalasova, Irina; Yin, Fang-Fang

2017-01-01

Compared to cone-beam computed tomography, digital tomosynthesis imaging has the benefits of shorter scanning time, less imaging dose, and better mechanical clearance for tumor localization in radiation therapy. However, for lung tumors, the localization accuracy of the conventional digital tomosynthesis technique is affected by the lack of depth information and the existence of lung tumor motion. This study investigates the clinical feasibility of using an orthogonal-view phase-matched digital tomosynthesis technique to improve the accuracy of lung tumor localization. The proposed orthogonal-view phase-matched digital tomosynthesis technique benefits from 2 major features: (1) it acquires orthogonal-view projections to improve the depth information in reconstructed digital tomosynthesis images and (2) it applies respiratory phase-matching to incorporate patient motion information into the synthesized reference digital tomosynthesis sets, which helps to improve the localization accuracy of moving lung tumors. A retrospective study enrolling 14 patients was performed to evaluate the accuracy of the orthogonal-view phase-matched digital tomosynthesis technique. Phantom studies were also performed using an anthropomorphic phantom to investigate the feasibility of using intratreatment aggregated kV and beams' eye view cine MV projections for orthogonal-view phase-matched digital tomosynthesis imaging. The localization accuracy of the orthogonal-view phase-matched digital tomosynthesis technique was compared to that of the single-view digital tomosynthesis techniques and the digital tomosynthesis techniques without phase-matching. The orthogonal-view phase-matched digital tomosynthesis technique outperforms the other digital tomosynthesis techniques in tumor localization accuracy for both the patient study and the phantom study. For the patient study, the orthogonal-view phase-matched digital tomosynthesis technique localizes the tumor to an average (± standard deviation) error of 1.8 (0.7) mm for a 30° total scan angle. For the phantom study using aggregated kV-MV projections, the orthogonal-view phase-matched digital tomosynthesis localizes the tumor to an average error within 1 mm for varying magnitudes of scan angles. The pilot clinical study shows that the orthogonal-view phase-matched digital tomosynthesis technique enables fast and accurate localization of moving lung tumors.

Asphalt pavement maintenance field handbook

DOT National Transportation Integrated Search

2001-04-01

This field manual provides guidelines for preventive asphalt pavement maintenance techniques for a variety of distresses and conditions. It covers: 1. crack treatments (clean and seal, rout and seal, full-depth crack repair); 2. surface treatments (f...

Rule Encoding in Orbitofrontal Cortex and Striatum Guides Selection

PubMed Central

Castagno, Meghan D.; Hayden, Benjamin Y.

2016-01-01

Active maintenance of rules, like other executive functions, is often thought to be the domain of a discrete executive system. An alternative view is that rule maintenance is a broadly distributed function relying on widespread cortical and subcortical circuits. Tentative evidence supporting this view comes from research showing some rule selectivity in the orbitofrontal cortex and dorsal striatum. We recorded in these regions and in the ventral striatum, which has not been associated previously with rule representation, as macaques performed a Wisconsin Card Sorting Task. We found robust encoding of rule category (color vs shape) and rule identity (six possible rules) in all three regions. Rule identity modulated responses to potential choice targets, suggesting that rule information guides behavior by highlighting choice targets. The effects that we observed were not explained by differences in behavioral performance across rules and thus cannot be attributed to reward expectation. Our results suggest that rule maintenance and rule-guided selection of options are distributed processes and provide new insight into orbital and striatal contributions to executive control. SIGNIFICANCE STATEMENT Rule maintenance, an important executive function, is generally thought to rely on dorsolateral brain regions. In this study, we examined activity of single neurons in orbitofrontal cortex and in ventral and dorsal striatum of macaques in a Wisconsin Card Sorting Task. Neurons in all three areas encoded rules and rule categories robustly. Rule identity also affected neural responses to potential choice options, suggesting that stored information is used to influence decisions. These results endorse the hypothesis that rule maintenance is a broadly distributed mental operation. PMID:27807165

Automotive Body Sheet Metal Maintenance I; Automotive Body Repair and Refinishing 1: 9033.05.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

The automotive body sheet metal maintenance course is an exploratory course in the use of all sheet metal working and equipment common to this trade area. Included are techniques of diagnosis of damage and repair. Emphasized is the proper use of tools and fabrication methods used in automotive body maintenance and repair. This nine week course…

Future Software Sizing Metrics and Estimation Challenges

DTIC Science & Technology

2011-07-01

systems 4. Ultrahigh software system assurance 5. Legacy maintenance and Brownfield development 6. Agile and Lean/ Kanban development. This paper...refined as the design of the maintenance modifications or Brownfield re-engineering is determined. VII. 6. AGILE AND LEAN/ KANBAN DEVELOPMENT The...difficulties of software maintenance estimation can often be mitigated by using lean workflow management techniques such as Kanban [25]. In Kanban

Natural forest management as a conservation tool in the tropics: divergent views on possibilities and alternatives

Treesearch

Matthew B. Dickinson; Joshua C. Dickinson; Francis E. Putz; Francis E. Putz

1996-01-01

A round table discussion was convened to explore divergent views on the potential for natural forest management (NFM) for timber to contribute to wide-scale maintenance of forest cover and biological diversity in tropical forests. The general argument for NFM for timber is that, by conferring relatively more economic value on forests that alternative forest uses, NFM...

44. VIEW OF UMBILICAL MAST AND LAUNCH PAD FROM SOUTHWEST. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

44. VIEW OF UMBILICAL MAST AND LAUNCH PAD FROM SOUTHWEST. DOORS FOR THE UMBILICAL MAST TRENCH RAISED FOR MAINTENANCE POSITION OF 10 DEGREES. LAUNCHER IS RIGHT OF MAST; RAILS PARALLEL TO MAST. CONTROL PANELS LEFT TO RIGHT: ELECTRICAL PANEL, COMMUNICATIONS PANEL, AND MAST CONTROL PANEL. - Vandenberg Air Force Base, Space Launch Complex 3, Launch Pad 3 East, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

Applying Lean to the F-15 Maintenance Process for the Royal Saudi Air Force

DTIC Science & Technology

2014-03-01

Royal Saudi Air Force. The research focuses on improving the F-15 maintenance process in the Royal Saudi Air Force’s Maintenance Squadrons. The F-15...and on the aircraft age condition, the researcher concludes it is time to get rid of some obstacles and use new management techniques to resolve the...processes? Research Focus This research is focusing on the Royal Saudi Air Force F-15 maintenance process. Because of the time and

Software maintenance in scientific and engineering environments: An introduction and guide

NASA Technical Reports Server (NTRS)

Wright, David

1986-01-01

The purpose of software maintenance techniques is addressed. The aims of perfective, adaptive and corrective software maintenance are defined and discussed, especially in the NASA research environment. Areas requiring maintenance, and tools available for this, and suggestions for their use are made. Stress is placed on the organizational aspect of maintenance at both the individual and group level. Particular emphasis is placed on the use of various forms of documentation as the basis around which to organize. Finally, suggestions are given on how to proceed in the partial or complete absence of such documentation.

Examining maintenance responsibilities.

PubMed

Lam, K C

2001-06-01

This paper has examined the important responsibilities of the two organisations involved in the provision of maintenance service for the vital building services in many of our highly serviced buildings. The issues raised could be put to beneficial use in both clients and maintenance providers. All in all, the clients should work closely with their maintenance providers. Engineering services in buildings will not perform satisfactorily and efficiently if both parties do not work together and understand the maintenance tasks based on a business partnering mode. Put forward is the view that the management of the activities involved in the operation and maintenance process is a "shared commitment/involvement" between the client and the maintenance provider. It is obvious that many factors can influence the continued effectiveness of a quality maintenance scheme set up by client and provider. Some of these factors are: Change in key personnel Updates in technology Amendments to engineering practice Implementation of legislative requirements Changes in operation by client or provider Change of use of building Passage of time These factors must be fully reviewed by both parties from time to time, and necessary actions taken. A cooperative team working relationship and improved communication should be fostered by the client and his provider for the best management of services maintenance. This arrangement will contribute to better building services systems with continuous improvement; improved value for clients and higher return for the maintenance provider.

Refining the maintenance techniques for Interlocking Concrete Paver GIs

EPA Science Inventory

Surface clogging adversely affects the performance of Interlocking Concrete Pavements (ICP) by reducing their ability to infiltrate stormwater runoff. The clogging rate is a function of pavement type, traffic loading, surrounding physical environment and maintenance treatments. ...

Evaluation of usefulness of 3D views for clinical photography.

PubMed

Jinnin, Masatoshi; Fukushima, Satoshi; Masuguchi, Shinichi; Tanaka, Hiroki; Kawashita, Yoshio; Ishihara, Tsuyoshi; Ihn, Hironobu

2011-01-01

This is the first report investigating the usefulness of a 3D viewing technique (parallel viewing and cross-eyed viewing) for presenting clinical photography. Using the technique, we can grasp 3D structure of various lesions (e.g. tumors, wounds) or surgical procedures (e.g. lymph node dissection, flap) much more easily even without any cost and optical aids compared to 2D photos. Most recently 3D cameras started to be commercially available, but they may not be useful for presentation in scientific papers or poster sessions. To create a stereogram, two different pictures were taken from the right and left eye views using a digital camera. Then, the two pictures were placed next to one another. Using 9 stereograms, we performed a questionnaire-based survey. Our survey revealed 57.7% of the doctors/students had acquired the 3D viewing technique and an additional 15.4% could learn parallel viewing with 10 minutes training. Among the subjects capable of 3D views, 73.7% used the parallel view technique whereas only 26.3% chose the cross-eyed view. There was no significant difference in the results of the questionnaire about the efficiency and usefulness of 3D views between parallel view users and cross-eyed users. Almost all subjects (94.7%) answered that the technique is useful. Lesions with multiple undulations are a good application. 3D views, especially parallel viewing, are likely to be common and easy enough to consider for practical use in doctors/students. The wide use of the technique may revolutionize presentation of clinical pictures in meetings, educational lectures, or manuscripts.

22. AERIAL VIEW LOOKING EAST DOWN CENTRAL AVENUE FROM WEST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. AERIAL VIEW LOOKING EAST DOWN CENTRAL AVENUE FROM WEST OF THE ADMINISTRATIVE AND SUPPORT AREA OF THE PLANT. ON THE LEFT (NORTH) SIDE OF THE STREET IN THE FOREGROUND OF THE PHOTOGRAPH IS BUILDING 111, THE GENERAL ADMINISTRATION BUILDING. TO THE EAST OF BUILDING 111 IS BUILDING 112, THE CAFETERIA. FURTHER TO THE EAST IS BUILDING 331, THE VEHICLE MAINTENANCE GARAGE AND FIRE DEPARTMENT; BUILDING 333, THE PAINT SHOP; BUILDING 334, THE ELECTRICAL AND GENERAL MAINTENANCE SHOP; AND BUILDING 551, THE GENERAL WAREHOUSE. ON THE RIGHT (SOUTH) SIDE OF CENTRAL AVENUE, IN THE FOREGROUND IS BUILDING 121, FIREARMS REPAIR. BEHIND BUILDING 121 IS BUILDING 122, EMERGENCY MEDICAL SERVICES, AND BUILDING 123, HEALTH PHYSICS LABORATORY. BUILDING 441, THE PRODUCTION ... - Rocky Flats Plant, Bounded by Indiana Street & Routes 93, 128 & 72, Golden, Jefferson County, CO

Motivational indictors predicting the engagement, frequency and adequacy of rainwater tank maintenance

NASA Astrophysics Data System (ADS)

Mankad, Aditi; Greenhill, Murni

2014-01-01

Rainwater tank maintenance is a key social behavior in our changing environment, as tanks are being adopted worldwide to augment household water supplies and reduce urban water stress. The maintenance of rainwater tanks in urban areas is an important pro-environmental behavior that prevents public health issues arising from unhygienic tank use. This study examined motivational differences in maintenance behavior between householders with retrofitted and mandated (compulsory) rainwater tanks on their property (N = 1988). Results showed that retrofitted tank owners were more self-determined in their motivation than mandated owners. Amotivation and integrated regulation were both dominant predictors of engagement in tank maintenance, frequency and adequacy of tank maintenance activities. Those involved in more maintenance activity were likely driven to do so because of feelings of adherence to personal goals and values (e.g., as "sustainable" citizens), whereas individuals who experienced a lack of control and alienation from the activity were likely to view maintenance as meaningless. Thus, people with higher integrated regulation engaged in more tank maintenance activities, whereas more amotivated individuals engaged in less maintenance. As cities begin relying more on citizen self-sufficiency with respect to water and energy resources, issues relating to infrastructure maintenance and operation become paramount. Results show that motivation is important in the impetus to engage in a pro-environmental behavior as well as the frequency and accuracy with which that behavior is undertaken. Policy implications are further discussed.

Refining the maintenance techniques for Interlocking Concrete Paver GIs - abstract

EPA Science Inventory

Surface clogging adversely affects the performance of Interlocking Concrete Pavements (ICP) by reducing their ability to infiltrate stormwater runoff. Determining the correct methods for remedial maintenances is crucial to recovering and maintaining efficient ICP performance. T...

Combat Maintenance Concepts and Repair Techniques Using Shape Memory Alloys for Fluid Lines, Control Tubes, and Drive Shafts.

DTIC Science & Technology

1983-03-01

BUREAU OF STANDARDS-1963-A ,,...:-. .-. -.’" :.- --. . 4 Iq " USAAVRADCOM-TR-82-D-37 COMBAT MAINTENANCE CONCEPTS AND REPAIR TECHNIQUES USING SHAPE MEMORY...O APPLIED TECHNOLOGY LABORATORY POSITION STATEMENT The results of this effort determined the feasibility of using the full-ring shape memory alloy...specifications, or other data are used for any purpose other than in connection with a definitely related Government procurement operation, the United

Power Grid Maintenance Scheduling Intelligence Arrangement Supporting System Based on Power Flow Forecasting

NASA Astrophysics Data System (ADS)

Xie, Chang; Wen, Jing; Liu, Wenying; Wang, Jiaming

With the development of intelligent dispatching, the intelligence level of network control center full-service urgent need to raise. As an important daily work of network control center, the application of maintenance scheduling intelligent arrangement to achieve high-quality and safety operation of power grid is very important. By analyzing the shortages of the traditional maintenance scheduling software, this paper designs a power grid maintenance scheduling intelligence arrangement supporting system based on power flow forecasting, which uses the advanced technologies in maintenance scheduling, such as artificial intelligence, online security checking, intelligent visualization techniques. It implements the online security checking of maintenance scheduling based on power flow forecasting and power flow adjusting based on visualization, in order to make the maintenance scheduling arrangement moreintelligent and visual.

23. VIEW OF THE FIRST FLOOR PLAN. THE FIRST FLOOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

23. VIEW OF THE FIRST FLOOR PLAN. THE FIRST FLOOR HOUSED ADMINISTRATIVE OFFICES, THE CENTRAL COMPUTING, UTILITY SYSTEMS, ANALYTICAL LABORATORIES, AND MAINTENANCE SHOPS. THE ORIGINAL DRAWING HAS BEEN ARCHIVED ON MICROFILM. THE DRAWING WAS REPRODUCED AT THE BEST QUALITY POSSIBLE. LETTERS AND NUMBERS IN THE CIRCLES INDICATE FOOTER AND/OR COLUMN LOCATIONS. - Rocky Flats Plant, General Manufacturing, Support, Records-Central Computing, Southern portion of Plant, Golden, Jefferson County, CO

The maintenance gap: a new theoretical perspective on the evolution of aging.

PubMed

Wensink, Maarten J; van Heemst, Diana; Rozing, Maarten P; Westendorp, Rudi G J

2012-04-01

One of the prevailing theories of aging, the disposable soma theory, views aging as the result of the accumulation of damage through imperfect maintenance. Aging, then, is explained from an evolutionary perspective by asserting that this lack of maintenance exists because the required resources are better invested in reproduction. However, the amount of maintenance necessary to prevent aging, 'maintenance requirement' has so far been largely neglected and has certainly not been considered from an evolutionary perspective. To our knowledge we are the first to do so, and arrive at the conclusion that all maintenance requirement needs an evolutionary explanation. Increases in maintenance requirement can only be selected for if these are linked with either higher fecundity or better capabilities to cope with environmental challenges to the integrity of the organism. Several observations are suggestive of the latter kind of trade-off, the existence of which leads to the inevitable conclusion that the level of maintenance requirement is in principle unbound. Even the allocation of all available resources to maintenance could be unable to stop aging in some organisms. This has major implications for our understanding of the aging process on both the evolutionary and the mechanistic level. It means that the expected effect of measures to reallocate resources to maintenance from reproduction may be small in some species. We need to have an idea of how much maintenance is necessary in the first place. Our explorations of how natural selection is expected to act on the maintenance requirement provides the first step in understanding this.

Assessment of weathering steel bridge performance in Iowa and development of inspection and maintenance techniques.

DOT National Transportation Integrated Search

2013-02-01

Weathering steel is commonly used as a cost-effective alternative for bridge superstructures, as the costs and environmental : impacts associated with the maintenance/replacement of paint coatings are theoretically eliminated. The performance of : we...

An Investigation of Students' Views about Enzymes by Fortune Lines Technique

ERIC Educational Resources Information Center

Özarslan, Murat; Çetin, Gülcan

2014-01-01

This study aimed to investigate ninth grade students' views about enzymes using fortune lines technique and to obtain the students' views about fortune lines technique. Participants were 38 ninth grade students in a Technique Vocational Girls High School in the city of Kocaeli, Turkey. After instruction of subject of enzymes, the participants were…

On Adding Structure to Unstructured Overlay Networks

NASA Astrophysics Data System (ADS)

Leitão, João; Carvalho, Nuno A.; Pereira, José; Oliveira, Rui; Rodrigues, Luís

Unstructured peer-to-peer overlay networks are very resilient to churn and topology changes, while requiring little maintenance cost. Therefore, they are an infrastructure to build highly scalable large-scale services in dynamic networks. Typically, the overlay topology is defined by a peer sampling service that aims at maintaining, in each process, a random partial view of peers in the system. The resulting random unstructured topology is suboptimal when a specific performance metric is considered. On the other hand, structured approaches (for instance, a spanning tree) may optimize a given target performance metric but are highly fragile. In fact, the cost for maintaining structures with strong constraints may easily become prohibitive in highly dynamic networks. This chapter discusses different techniques that aim at combining the advantages of unstructured and structured networks. Namely we focus on two distinct approaches, one based on optimizing the overlay and another based on optimizing the gossip mechanism itself.

Demonstration of cardiac rotor and source mapping techniques in embryonic chick monolayers

NASA Astrophysics Data System (ADS)

You, Min Ju; Langfield, Peter; Campanari, Lucas; Dobbs, Matt; Shrier, Alvin; Glass, Leon

2017-09-01

Excitable media, such as the heart, display propagating waves with different geometries including target patterns and rotors (spiral waves). Collision of two waves leads to annihilation of both. We present algorithms for data processing and analysis to identify the core of rotors. In this work, we show that as the spatial sampling resolution decreases it becomes increasingly difficult to identify rotors—there are instances of false negatives and false positives. These observations are relevant to current controversies concerning the role of rotors in the initiation, maintenance, and treatment of cardiac arrhythmias, especially atrial fibrillation. Currently some practitioners target the core of rotors for ablation, but the effectiveness of this procedure has been questioned. In view of the difficulties inherent in the identification of rotors, we conclude that methods to identify rotors need to first be validated prior to assessing the efficacy of ablation.

Aeronautic instruments. Section I : general classification of instruments and problems including bibliography

NASA Technical Reports Server (NTRS)

Hersey, Mayo D

1923-01-01

This report is intended as a technical introduction to the series of reports on aeronautic instruments. It presents a discussion of those subjects which are common to all instruments. First, a general classification is given, embracing all types of instruments used in aeronautics. Finally, a classification is given of the various problems confronted by the instrument expert and investigator. In this way the following groups of problems are brought up for consideration: problems of mechanical design, human factor, manufacturing problems, supply and selection of instruments, problems concerning the technique of testing, problems of installation, problems concerning the use of instruments, problems of maintenance, and physical research problems. This enumeration of problems which are common to instruments in general serves to indicate the different points of view which should be kept in mind in approaching the study of any particular instrument.

An IMS Station life cycle from a sustainment point of view

NASA Astrophysics Data System (ADS)

Brely, Natalie; Gautier, Jean-Pierre; Foster, Daniel

2014-05-01

The International Monitoring System (IMS) is to consist of 321 monitoring facilities, composed of four different technologies with a variety of designs and equipment types, deployed in a range of environments around the globe. The International Monitoring System is conceived to operate in perpetuity through maintenance, replacement and recapitalization of IMS facilities' infrastructure and equipment when the end of service life is reached [CTBT/PTS/INF.1163]. Life Cycle techniques and modellization are being used by the PTS to plan and forecast life cycle sustainment requirements of IMS facilities. Through historical data analysis, Engineering inputs and Feedback from experienced Station Operators, the PTS currently works towards increasing the level of confidence on these forecasts and sustainment requirements planning. Continued validation, feedback and improvement of source data from scientific community and experienced users is sought and essential in order to ensure limited effect on data availability and optimal costs (human and financial).

Advanced Representation Technologies Applied to the Temple of Neptune, the Sphinx and the Metope in the Archaeological Park of Paestum

NASA Astrophysics Data System (ADS)

Cardinale, T.; Valva, R.; Lucarelli, M.

2013-02-01

The Summer School of Surveying and 3D modelling in Paestum was an opportunity to explore the use of innovative tools and advanced techniques in the design, implementation and management of surveys of historic and artistic complexes. In general such methods are used specifically for the development and management of vulnerability maps of existing heritage and so for the preventive conservation and valorisation of the built environment. The accurate detection of risk situations and the systematic promotion of highly selected and minimally invasive maintenance practices means that restoration and the efficiency of cycles of intervention can be optimized, with clear benefits from economic and cultural points of view. The group worked on the survey and 3D modelling of the Temple of Neptune, the Sphinx and the Metope of the Archaeological Park in Paestum.

18. Interior view, 'Inside Key Route Inspection Bldg.', view to ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. Interior view, 'Inside Key Route Inspection Bldg.', view to east, August 16, 1939. Note inspection pits and work areas beneath tracks. The Key Route and Interurban Electric Railway Bridge Yard Shop buildings were identical, and this view provides an in-service look at the well-lit interior. While Key Route articulated cars were quite different in design from the Interurban Electric Railway cars, the maintenance requirements were quite similar. The Key Route Bridge Yard Shop building was demolished in the 1970s. Its last use was storage of much of the historic railway equipment now on display at the California State Railroad Museum in Sacramento. - Interurban Electric Railway Bridge Yard Shop, Interstate 80 at Alameda County Postmile 2.0, Oakland, Alameda County, CA

Regenerative particulate filter development

NASA Technical Reports Server (NTRS)

Descamp, V. A.; Boex, M. W.; Hussey, M. W.; Larson, T. P.

1972-01-01

Development, design, and fabrication of a prototype filter regeneration unit for regenerating clean fluid particle filter elements by using a backflush/jet impingement technique are reported. Development tests were also conducted on a vortex particle separator designed for use in zero gravity environment. A maintainable filter was designed, fabricated and tested that allows filter element replacement without any leakage or spillage of system fluid. Also described are spacecraft fluid system design and filter maintenance techniques with respect to inflight maintenance for the space shuttle and space station.

Summit Station Skiway Cost Analysis

DTIC Science & Technology

2016-07-01

Laboratory (CRREL) U.S. Army Engineer Research and Development Center (ERDC) 72 Lyme Road Hanover, NH 03755-1290 Final Report Approved for...cargo loads. To explore further skiway improvement and cost saving techniques, this report reviews alternative maintenance and construction options...3 2.2 Maintenance

Artificial Intelligent Platform as Decision Tool for Asset Management, Operations and Maintenance.

PubMed

2018-01-04

An Artificial Intelligence (AI) system has been developed and implemented for water, wastewater and reuse plants to improve management of sensors, short and long term maintenance plans, asset and investment management plans. It is based on an integrated approach to capture data from different computer systems and files. It adds a layer of intelligence to the data. It serves as a repository of key current and future operations and maintenance conditions that a plant needs have knowledge of. With this information, it is able to simulate the configuration of processes and assets for those conditions to improve or optimize operations, maintenance and asset management, using the IViewOps (Intelligent View of Operations) model. Based on the optimization through model runs, it is able to create output files that can feed data to other systems and inform the staff regarding optimal solutions to the conditions experienced or anticipated in the future.

[The financial impact of maintenance treatment in heroin addictive behavior: the case of Subutex].

PubMed

Kopp, P; Rumeau-Pichon, C; Le Pen, C

2000-06-01

The development of maintenance treatment for subjects with addictive behavior is an important public health issue. As such, the social effectiveness of maintenance products must be examined from an economical and social point of view. This paper aims at presenting the financial costs involved in the use of Subutex, a product commercialized since 1996. A complete typology of costs related to drug addiction and its consequences was set up. Some of these costs were estimated on the basis of data drawn from the literature. The cost of Subutex use for maintenance treatment was assessed and compared with the financial stakes including the potential reduction of the economic and social cost of drug addiction. Monthly treatment cost of Subutex was 1252 FrF per drug abuser on maintenance treatment. By extrapolation, for a population of 40,000 drug abusers, the direct medical cost of Subutex during a course of maintenance treatment with general practitioner follow-up was estimated at 600 millions FrF. US data sources were applied to France to assess the cost of illnesses attributable to drug addiction. The cost reached 4.8 billions FrF. The cost of delinquency associated with drug addiction, which mostly concerns money laundered to purchase substances was an estimated 6.4 billions FrF. Finally, the cost of public anti-drug abuse programs was nearly 4.7 billions FrF. Thus, the direct cost of drug addiction consequences reached 15.6 billions FrF. This cost should be compared with the annual cost of Subutex for public organizations which was an estimated 600 millions FrF. The "profit" threshold of maintenance treatment with Subutex in terms of direct costs is very low. A decrease of only 4% of the costs associated with drug addiction would make it possible to balance the financial budget for the community. Our analysis does not take into acount absolutely all the public health and safety aspects involved in the use of Subutex. It does however provide a useful assessment of the financial aspects of the question and justification for this therapeutic strategy from a budgetary point of view.

Russian EVA 39.

NASA Image and Video Library

2014-08-18

ISS040E099104 (08/18/2014) --- View of Cosmonaut Oleg Artemyev (blue stripe), Expedition 40 flight engineer outside the International Space Station, taken while performing maintenance work on the Russian segment during the Russian EVA 39 on Aug 18 2014.

Pavement condition model based on automated pavement distress surveys.

DOT National Transportation Integrated Search

2014-05-01

Many government agencies and private consulting companies must deal with the issue of : pavement maintenance. The ability to maintain an in-service pavement structure in : acceptable condition from structural and functional points of view is related ...

TOPEX/Poseidon orbit maintenance for the first five years

NASA Technical Reports Server (NTRS)

Bhat, R. S.; Shapiro, B. E.; Frauenholz, R. B.; Leavitt, R. K.

1998-01-01

The TOPEX/Poseidon orbit maintenance strategy was changed following launch to include the effects of observed unmodeled, and hence anomalous, along-track accelerations. The anomalous force causes the semi-major axis, a, to either increase (called "boost") or decrease ("deboost" or "decay") depending on the satellite attitude and solar array pitch angle offset. Although this force is the most uncertain parameter in ground track prediction, it has been used as a passive technique for orbit maintenance, thereby reducing the number of propulsive maneuvers, enhancing maneuver spacing, and to place maneuvers at convenient times. This passive technique was first demonstrated in May 1993. The TOPEX/Poseidon orbit has been uniquely maintained using both passive (non-propulsive) and active (propulsive) maneuvers. Furthermore, the orbit has been maintained using only the passive technique since the ninth orbit maintenance maneuver on January 15, 1996. Only nine orbit maintenance maneuvers have been required to maintain the ground track, including verification site over flights, since achieving the operational orbit on September 21, 1992 (mission requirement: 95% within +/- l km). During this period, a has varied within 7,714,429 +/- 7 m, while the inclination i periodically fluctuated in the range 66.0408 deg. +/- 0.0040 deg. The frozen orbit (required e < 0.001 and omega approximately equals to 90 deg.) has been maintained without any dedicated eccentricity maneuvers. The frozen eccentricity vector has completed two periodic cycles and it is currently tracing its third cycle (period approximately equals 26.7 months).

A distributed database view of network tracking systems

NASA Astrophysics Data System (ADS)

Yosinski, Jason; Paffenroth, Randy

2008-04-01

In distributed tracking systems, multiple non-collocated trackers cooperate to fuse local sensor data into a global track picture. Generating this global track picture at a central location is fairly straightforward, but the single point of failure and excessive bandwidth requirements introduced by centralized processing motivate the development of decentralized methods. In many decentralized tracking systems, trackers communicate with their peers via a lossy, bandwidth-limited network in which dropped, delayed, and out of order packets are typical. Oftentimes the decentralized tracking problem is viewed as a local tracking problem with a networking twist; we believe this view can underestimate the network complexities to be overcome. Indeed, a subsequent 'oversight' layer is often introduced to detect and handle track inconsistencies arising from a lack of robustness to network conditions. We instead pose the decentralized tracking problem as a distributed database problem, enabling us to draw inspiration from the vast extant literature on distributed databases. Using the two-phase commit algorithm, a well known technique for resolving transactions across a lossy network, we describe several ways in which one may build a distributed multiple hypothesis tracking system from the ground up to be robust to typical network intricacies. We pay particular attention to the dissimilar challenges presented by network track initiation vs. maintenance and suggest a hybrid system that balances speed and robustness by utilizing two-phase commit for only track initiation transactions. Finally, we present simulation results contrasting the performance of such a system with that of more traditional decentralized tracking implementations.

46. ARAI. Aerial view of ARAI buildings as they looked ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

46. ARA-I. Aerial view of ARA-I buildings as they looked in 1981. From left to right, buildings are tank (ARA-727), contaminated waste storage tank (ARA-629), trailer, hot cell building (ARA-626), fuel oil storage tank (ARA-728), guard house (ARA-628), shop and maintenance building (ARA-627), and two trailers. Ineel photo no. 81-297. - Idaho National Engineering Laboratory, Army Reactors Experimental Area, Scoville, Butte County, ID

40. INTERIOR VIEW TO THE SOUTHEAST OF ROOM 302, A ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

40. INTERIOR VIEW TO THE SOUTHEAST OF ROOM 302, A SMALL ISOLATED OFFICE ON THE THIRD FLOOR ON THE EAST SIDE OF THE DISASSEMBLY BAY. A METAL SPIRAL STAIRCASE IS IN THE SOUTHEAST CORNER AND HATCHWAYS ARE IN THE CEILING AND FLOOR TOWARD THE EAST SIDE OF THE ROOM. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

Semantics of Procedures: A Cognitive Basis for Maintenance Training Competency

DTIC Science & Technology

1988-04-01

provided by presenting these multiple, interacting views. These 0 conclusions are similar to the views of George Polya , who proposed the use of... exercises . It is also clear that at least some understanding of machine structure and function is required to interpret much of the information in the...check of the problem lists provides the names of all the usual subpects. This accessibility permits the technician to modify the sequence according to

48 CFR 970.4402-2 - General requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... techniques such as partnering agreements, ombudsmen, and alternative disputes procedures; (6) Use of self-assessment and benchmarking techniques to support continuous improvement in purchasing; (7) Maintenance of...

48 CFR 970.4402-2 - General requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... techniques such as partnering agreements, ombudsmen, and alternative disputes procedures; (6) Use of self-assessment and benchmarking techniques to support continuous improvement in purchasing; (7) Maintenance of...

48 CFR 970.4402-2 - General requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... techniques such as partnering agreements, ombudsmen, and alternative disputes procedures; (6) Use of self-assessment and benchmarking techniques to support continuous improvement in purchasing; (7) Maintenance of...

48 CFR 970.4402-2 - General requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... techniques such as partnering agreements, ombudsmen, and alternative disputes procedures; (6) Use of self-assessment and benchmarking techniques to support continuous improvement in purchasing; (7) Maintenance of...

Analysis, comparison, and contrast of two primary maintenance contracting techniques used by the Florida Department of Transportation.

DOT National Transportation Integrated Search

2016-08-01

The Florida Department of Transportations (FDOT) Asset Maintenance Contracting Program (AMC) was analyzed during this study to determine if it reduced cost or affected work quality when compared with more-traditional contracts. A survey was conduc...

14 CFR 135.433 - Maintenance and preventive maintenance training program.

Code of Federal Regulations, 2010 CFR

2010-01-01

... OPERATIONS OPERATING REQUIREMENTS: COMMUTER AND ON DEMAND OPERATIONS AND RULES GOVERNING PERSONS ON BOARD... personnel) who determines the adequacy of work done is fully informed about procedures and techniques and new equipment in use and is competent to perform that person's duties. ...

Techniques to Determine Maintenace Frequency of Permeable Pavement Systems with Time Domain Reflectometers (TDRs

EPA Science Inventory

As the surface clogs in permeable pavement systems, they lose effectiveness and require maintenance. There is limited direct guidance for determining when maintenance is needed to prevent surface runoff bypass. Research is being conducted using multiple time domain reflectomete...

Phenomenology study of HERMES ground-penetrating radar technology for detection and identification of common bridge deck features

DOT National Transportation Integrated Search

2001-06-01

Accurately evaluating the condition of a bridge deck over time and using this information to choose appropriate maintenance techniques has become critical for the efficient allocation of resources to bridge deck maintenance. Tomographic imaging of su...

Assessment of Diagnostic Value of Single View Dynamic Technique in Diagnosis of Developmental Dysplasia of Hip: A Comparison with Static and Dynamic Ultrasond Techniques

PubMed Central

Alamdaran, Seyed Ali; Kazemi, Sahar; Parsa, Ali; Moghadam, Mohammad Hallaj; Feyzi, Ali; Mardani, Reza

2016-01-01

Background: Developmental dysplasia of hip (DDH) is a common childhood disorder, and ultrasonography examination is routinely used for screening purposes. In this study, we aimed to evaluate a modified combined static and dynamic ultrasound technique for the detection of DDH and to compare with the results of static and dynamic ultrasound techniques. Methods: In this cross-sectional study, during 2013- 2015, 300 high-risk infants were evaluated by ultrasound for DDH. Both hips were examined with three techniques: static, dynamic and single view static and dynamic technique. Statistical analysis was performed using SPSS version 11.5. Results: Patients aged 9 days to 83 weeks. 75% of the patients were 1 to 3 months old. Among 600 hip joints, about 5% were immature in static sonography and almost all of them were unstable in dynamic techniques. 0.3% of morphologically normal hips were unstable in dynamic sonography and 9% of unstable hips had normal morphology. The mean β angle differences in coronal view before and after stress maneuver was 14.43±5.47° in unstable hips. Single view static and dynamic technique revealed that all cases with acetabular dysplasia, instability and dislocation, except two dislocations, were detected by dynamic transverse view. For two cases, Ortolani maneuver showed femoral head reversibility in dislocated hips. Using single view static and dynamic technique was indicative and applicable for detection of more than 99% of cases. Conclusion: Single view static and dynamic technique not only is a fast and easy technique, but also it is of high diagnostic value in assessment of DDH. PMID:27847852

Mathematical Methods of Managing Economic Sustainability of the Construction Company

NASA Astrophysics Data System (ADS)

Kostuchenko, Vasiliy; Zdanov, Andrej; Rodionov, Anatolij

2017-10-01

This article presents a long-term research in developing innovative mathematical techniques of managing the contractor’s economic sustainability proven by some experimental studies. The article aims at presenting some practical results of applying these techniques to the scientific community. This research presents a description of some applied mathematical models, views, and some results of their practical application in the applied field for the purposes of evaluating operational sustainability and minimizing losses in the process of managing the company. The authors have put the technology they have developed to practical use, and the article presents the results of such application. The authors have put the developed technology to practical use. Company management also means the management of power consumption, which is highly vital both for the construction and maintenance of buildings and structures. The articles also dwell on some possible improvements of managing energy consumption within the framework of the general management of company’s economic sustainability, because these phenomena have a tight organic interdependence. The authors continue researching this direction in order to improve the production efficiency of the proposed technologies as well as to eliminate some drawbacks they have spotted.

FLIGHT LINE, LOOKING TOWARD FLIGHT LINE FIRE STATION (BUILDING 2748)CENTER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

FLIGHT LINE, LOOKING TOWARD FLIGHT LINE FIRE STATION (BUILDING 2748)CENTER AND AIRCRAFT MAINTENANCE DOCKS (BUILDINGS 2741 AND 2766)LEFT. VIEW TO NORTH - Plattsburgh Air Force Base, U.S. Route 9, Plattsburgh, Clinton County, NY

Relapse Prevention in Health Promotion: Strategies and Long-Term Outcome.

ERIC Educational Resources Information Center

Gintner, Gary G.

1988-01-01

Reviews the efficacy of maintenance enhancement procedures to prevent relapse in smoking cessation, weight control, and exercise programs. Presents models of maintenance enhancement, reviews studies that have used relapse prevention strategies, and discusses ways of incorporating relapse prevention techniques into health promotion programs.…

Modeling a maintenance simulation of the geosynchronous platform

NASA Technical Reports Server (NTRS)

Kleiner, A. F., Jr.

1980-01-01

A modeling technique used to conduct a simulation study comparing various maintenance routines for a space platform is dicussed. A system model is described and illustrated, the basic concepts of a simulation pass are detailed, and sections on failures and maintenance are included. The operation of the system across time is best modeled by a discrete event approach with two basic events - failure and maintenance of the system. Each overall simulation run consists of introducing a particular model of the physical system, together with a maintenance policy, demand function, and mission lifetime. The system is then run through many passes, each pass corresponding to one mission and the model is re-initialized before each pass. Statistics are compiled at the end of each pass and after the last pass a report is printed. Items of interest typically include the time to first maintenance, total number of maintenance trips for each pass, average capability of the system, etc.

An Embedded Wireless Sensor Network with Wireless Power Transmission Capability for the Structural Health Monitoring of Reinforced Concrete Structures.

PubMed

Gallucci, Luca; Menna, Costantino; Angrisani, Leopoldo; Asprone, Domenico; Moriello, Rosario Schiano Lo; Bonavolontà, Francesco; Fabbrocino, Francesco

2017-11-07

Maintenance strategies based on structural health monitoring can provide effective support in the optimization of scheduled repair of existing structures, thus enabling their lifetime to be extended. With specific regard to reinforced concrete (RC) structures, the state of the art seems to still be lacking an efficient and cost-effective technique capable of monitoring material properties continuously over the lifetime of a structure. Current solutions can typically only measure the required mechanical variables in an indirect, but economic, manner, or directly, but expensively. Moreover, most of the proposed solutions can only be implemented by means of manual activation, making the monitoring very inefficient and then poorly supported. This paper proposes a structural health monitoring system based on a wireless sensor network (WSN) that enables the automatic monitoring of a complete structure. The network includes wireless distributed sensors embedded in the structure itself, and follows the monitoring-based maintenance (MBM) approach, with its ABCDE paradigm, namely: accuracy, benefit, compactness, durability, and easiness of operations. The system is structured in a node level and has a network architecture that enables all the node data to converge in a central unit. Human control is completely unnecessary until the periodic evaluation of the collected data. Several tests are conducted in order to characterize the system from a metrological point of view and assess its performance and effectiveness in real RC conditions.

Technology management: a perspective on system support, procurement, and replacement planning.

PubMed

Dickerson, M L; Jackson, M E

1992-01-01

The escalating costs associated with medical technology present a host of challenges for the hospital clinical engineering department. As service and support costs comprise ever larger portions of a system's life cycle cost, innovative management of service provider mix and mechanisms can provide substantial savings in operating expenses. In addition to full-service contracts, the use of demand service and independents has become commonplace. Medical equipment maintenance insurance programs provide yet another service alternative, combining the flexibility of demand service with the safety of a capped budget. These programs have gained acceptance among hospitals as their providers have become more focused on the healthcare market and its many needs. In view of the long-term cost impact surrounding technology procurement, the authors recommend that hospitals refine system evaluation methodologies and develop more comprehensive techniques directed at capital equipment replacement planning. One replacement planning approach, based on an estimation of system value changes, is described and illustrated using data collected through client consultations. Although the validity of this method has not been demonstrated, it represents a simplified approach to life cycle cost analysis and is intended to provide a standard method by which system replacement planning may be quantified. As a departure from system devaluation based solely on depreciation, this method estimates prospective system values derived from anticipated operations and maintenance costs, projected revenue, and the availability of new technology.

Commentary on the shifting processes model: a conceptual model for weight management.

PubMed

Pagoto, Sherry; Rodrigues, Stephanie

2013-12-01

Macchi and colleagues propose a theoretical model that merges concepts from the biopsychosocial model and family systems theory to produce a broader framework for understanding weight loss and maintenance (see record 2013-28564-001). The Shifting Processes Model views individual weight loss and maintenance in the context of family dynamics, including family eating and exercise habits, home environment, and family relationships. The authors reason that traditional models put the burden of change on the individual rather than the family system, when the latter is an important context of individual behavior.

Service contract with periodic preventive maintenance for a dump truck sold with a two-dimensional warranty

NASA Astrophysics Data System (ADS)

Nasrum, A.; Pasaribu, U. S.; Husniah, H.

2016-02-01

This paper deals with maintenance service contract for a dump truck sold with a two-dimensional warranties. We consider a situation where an agent offers two maintenance contract options and the owner of the equipment has to select the optimal option either the OEM carried out all repairs and preventive maintenance activities (option one) or the OEM only carries out failure while the costumer undertakes preventive maintenance action in-house (option two). As the number of preventive maintenance and corrective maintenance that occurs in the area of servicing contracts is very influential in determining the value of the contract, we have to determine the optimal time between preventive maintenance that can minimize the cost of repair in the contract area. Moreover, we also study the maintenance service contract considering reduction of the intensity function after preventive maintenance from both the owner and OEM point of views. In this paper, we use a Weibull intensity function to consider a product with increasing failure intensity. We use a non-cooperative game formulation to determine the optimal price structure (i.e., the contract price and repair cost) for the OEM and the owner. A numerical example derived from the model has shown that if the owner choose option one then the owner obtain a higher profit compared with the profit resulted from option two. The result agree with earlier work which uses the accelerated failure time (AFT) for the failure modeling, while here we model the failure of the dump truck without the use of the AFT.

Induction motor broken rotor bar fault location detection through envelope analysis of start-up current using Hilbert transform

NASA Astrophysics Data System (ADS)

Abd-el-Malek, Mina; Abdelsalam, Ahmed K.; Hassan, Ola E.

2017-09-01

Robustness, low running cost and reduced maintenance lead Induction Motors (IMs) to pioneerly penetrate the industrial drive system fields. Broken rotor bars (BRBs) can be considered as an important fault that needs to be early assessed to minimize the maintenance cost and labor time. The majority of recent BRBs' fault diagnostic techniques focus on differentiating between healthy and faulty rotor cage. In this paper, a new technique is proposed for detecting the location of the broken bar in the rotor. The proposed technique relies on monitoring certain statistical parameters estimated from the analysis of the start-up stator current envelope. The envelope of the signal is obtained using Hilbert Transformation (HT). The proposed technique offers non-invasive, fast computational and accurate location diagnostic process. Various simulation scenarios are presented that validate the effectiveness of the proposed technique.

27. INTERIOR VIEW TO THE WEST OF ROOM 126 AT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

27. INTERIOR VIEW TO THE WEST OF ROOM 126 AT THE NORTH END OF THE ENTRANCE HALLWAY TO THE POST-MORTEM CELLS. IN THE CEILING IS A HATCHWAY TO THE UPPER LEVEL OF ROOM 123, THE DISASSEMBLY BAY, BY WHICH PARTS OF THE NUCLEAR REACTOR WERE PASSED FOR FURTHER DISASSEMBLY IN THE VARIOUS POST-MORTEM CELLS. - Nevada Test Site, Reactor Maintenance Assembly & Dissassembly Facility, Area 25, Jackass Flats, Junction of Roads F & G, Mercury, Nye County, NV

NASA work unit system file maintenance manual

NASA Technical Reports Server (NTRS)

1972-01-01

The NASA Work Unit System is a management information system for research tasks (i.e., work units) performed under NASA grants and contracts. It supplies profiles on research efforts and statistics on fund distribution. The file maintenance operator can add, delete and change records at a remote terminal or can submit punched cards to the computer room for batch update. The system is designed for file maintenance by a person with little or no knowledge of data processing techniques.

The School Custodian and Operation of the School Plant.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge.

Guidelines for school maintenance techniques and operational procedures in which consideration is given to the following aspects of school maintenance and operation--(1) importance and responsibilities of the school custodian, (2) custodial personnel policies, (3) housekeeping duties in the school plant, (4) cleaning restrooms in the school plant,…

A System Approach to Navy Medical Education and Training. Appendix 40. Competency Curricula for Pharmacy Assistant and Pharmacy Technician.

DTIC Science & Technology

1974-08-31

Procedures and techniques for compounding syrups, collodion, waters, spirits, liniments Use and maintenance of automatic liquid prepacker IIi [ o [ I... liniments , glycerites, elixirs Use and maintenance of automatic liquid prepacker 31 J ] Competency: PHARMACY TECHNICIAN (PHT) Unit II: Compounding

Electronic Computer and Switching Systems Specialist (AFSC 30554).

ERIC Educational Resources Information Center

Air Univ., Gunter AFS, Ala. Extension Course Inst.

This course is intended to train Air Force personnel to become electronic computer and switching systems specialists. One part of the course consists of a three-volume career development course. Topics are maintenance orientation (15 hours), electronic principles and digital techniques (87 hours), and systems maintenance (51 hours). Each volume…

Modified fluoroscopy-guided sacroiliac joint injection: a technical report.

PubMed

Liliang, Po-Chou; Liang, Cheng-Loong; Lu, Kang; Weng, Hui-Ching; Syu, Fei-Kai

2014-09-01

Sacroiliac joint (SIJ) injection can occasionally be challenging. We describe our experience in using conventional technique, and we developed an adjustment to overcome difficulties incurred. Conventional technique required superimposition of the posterior and anterior SIJ lines. If this technique failed to provide entry into the joint, fluoroscopy was slightly adjusted to obtain an oblique view. Of 50 SIJ injections, 29 (58%; 44-72%) were successfully performed using conventional technique. In another 21 procedures, 18 (85.7%; 64-99%) were subsequently completed using oblique view technique. The medial joint line, viewed from this angle, corresponded to the posterior joint line in 17 cases. The lateral joint line corresponded to the posterior joint line in one case. Oblique view technique can improve the success rate of SIJ injection. Wiley Periodicals, Inc.

Webinar: A Proactive Approach to IAQ: Saving Money and Protecting Health With Preventive Maintenance

EPA Pesticide Factsheets

A page to register to view the June 22, 2017, webinar in the IAQ Knowledge-to-Action Professional Training Webinar Series: Green Cleaning for Improved Health: The Return on Investment of Green Cleaning in Schools

1986 survey of aviation business operators : their views of FAA airworthiness inspectors.

DOT National Transportation Integrated Search

1987-03-01

A nationwide survey of 8,854 aviation business operators (users) was conducted to assess their perceptions of, and satisfaction with, the performance of the agency's avionic and maintenance airworthiness inspection (AWIs). Results are based on return...

Energy and protein requirements for maintenance of dairy goats during pregnancy and their efficiencies of use.

PubMed

Härter, C J; Lima, L D; Silva, H G O; Castagnino, D S; Rivera, A R; Resende, K T; Teixeira, I A M A

2017-09-01

It has been suggested that maintenance requirements are similar among animals of different physiological stages; however, important physiological changes occur in the maternal body during pregnancy. Therefore, the aim of this study was to determine the energy and protein requirements for the maintenance of pregnant dairy goats and to estimate their efficiency of energy and protein utilization for maintenance and pregnancy. We used 66 multiparous pregnant goats having 49.0 ± 1.59 kg initial BW (around the third or fourth parturition) arranged in a randomized block design with a 3 × 3 factorial scheme including slaughter at different days of pregnancy (DOP; 80, 110, and 140 d) and feed restriction (0, 20, and 40% feed restriction). The comparative slaughter technique was used to estimate energy and protein maintenance requirements. Goats slaughtered at 140 DOP were subjected to digestibility trials at around 80, 110, and 140 DOP to estimate diet metabolizability and N balance (NBAL). Metabolizability decreased with feed restriction and was 63.3 ± 2.16, 55.7 ± 2.35, and 58.2 ± 2.30% at 0, 20, and 40% of feed restriction, respectively ( < 0.01). There was no effect of DOP on NE or the requirements of ME for maintenance (ME), which were 197 and 315 kJ/kg empty body weight (EBW), respectively, and the efficiency of ME utilization for maintenance (k) was 0.63. Similarly, DOP did not affect thedaily net protein requirements for maintenance (NP) estimated using the comparative slaughter technique (1.38 ± 0.512 g/kg EBW; = 0.003) or the NP estimated using NBAL (2.49 ± 0.594 g/kg EBW; < 0.01). The MP requirement for maintenance (MP) estimated using the comparative slaughter technique was not affected by DOP and was 3.22 g MP/kg EBW ( < 0.01). The efficiency of MP utilization for maintenance (k) was 0.43. The efficiency of ME utilization for pregnancy (k) increased with the progress of pregnancy and was 0.058, 0.10, and 0.19 at 80, 110, and 140 DOP, respectively. Similarly, the efficiency of MP utilization for pregnancy (k) increased with DOP and was 0.12, 0.21, and 0.43 at 80, 110, and 140 DOP, respectively. There was no evidence that pregnancy affected NE, ME, NP, and MP or k and k, which were also unaffected by DOP. However, k and k increased with pregnancy progress as a response to the physiological changes that pregnant females are subjected to.

Negative emotions facilitate isometric force through activation of prefrontal cortex and periaqueductal gray.

PubMed

Blakemore, Rebekah L; Rieger, Sebastian W; Vuilleumier, Patrik

2016-01-01

Emotions are considered to modulate action readiness. Previous studies have demonstrated increased force production following exposure to emotionally arousing visual stimuli; however the neural mechanisms underlying how precise force output is controlled within varying emotional contexts remain poorly understood. To identify the neural correlates of emotion-modulated motor behaviour, twenty-two participants produced a submaximal isometric precision-grip contraction while viewing pleasant, unpleasant, neutral or blank images (without visual feedback of force output). Force magnitude was continuously recorded together with change in brain activity using functional magnetic resonance imaging. Viewing unpleasant images resulted in reduced force decay during force maintenance as compared with pleasant, neutral and blank images. Subjective valence and arousal ratings significantly predicted force production during maintenance. Neuroimaging revealed that negative valence and its interaction with force output correlated with increased activity in right inferior frontal gyrus (rIFG), while arousal was associated with amygdala and periaqueductal gray (PAG) activation. Force maintenance alone was correlated with cerebellar activity. These data demonstrate a valence-driven modulation of force output, mediated by a cortico-subcortical network involving rIFG and PAG. These findings are consistent with engagement of motor pathways associated with aversive motivation, eliciting defensive behaviour and action preparedness in response to negative emotional signals. Copyright © 2015 Elsevier Inc. All rights reserved.

Application of reliability-centered-maintenance to BWR ECCS motor operator valve performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feltus, M.A.; Choi, Y.A.

1993-01-01

This paper describes the application of reliability-centered maintenance (RCM) methods to plant probabilistic risk assessment (PRA) and safety analyses for four boiling water reactor emergency core cooling systems (ECCSs): (1) high-pressure coolant injection (HPCI); (2) reactor core isolation cooling (RCIC); (3) residual heat removal (RHR); and (4) core spray systems. Reliability-centered maintenance is a system function-based technique for improving a preventive maintenance program that is applied on a component basis. Those components that truly affect plant function are identified, and maintenance tasks are focused on preventing their failures. The RCM evaluation establishes the relevant criteria that preserve system function somore » that an RCM-focused approach can be flexible and dynamic.« less

Cluster man/system design requirements and verification. [for Skylab program

NASA Technical Reports Server (NTRS)

Watters, H. H.

1974-01-01

Discussion of the procedures employed for determining the man/system requirements that guided Skylab design, and review of the techniques used for implementing the man/system design verification. The foremost lesson learned from the design need anticipation and design verification experience is the necessity to allow for human capabilities of in-flight maintenance and repair. It is now known that the entire program was salvaged by a series of unplanned maintenance and repair events which were implemented in spite of poor design provisions for maintenance.

Webinar: From Roof to Curb: Taking a Comprehensive Approach to IAQ Management Through Preventive Maintenance

EPA Pesticide Factsheets

A page to register to view the June 22, 2017, webinar in the IAQ Knowledge-to-Action Professional Training Webinar Series: Green Cleaning for Improved Health: The Return on Investment of Green Cleaning in Schools

Backing warning sensors for tow plows.

DOT National Transportation Integrated Search

2013-06-01

Backup warning system devices were evaluated to determine if they would alert winter maintenance snow : plow drivers to obstacles directly behind the trailer and out of view of the driver when a unit is backed up. : When the sensors on the back of th...

The Essence of Montessori. Spotlight: Updating Our Agendas.

ERIC Educational Resources Information Center

Loeffler, Margaret H.

2002-01-01

Discusses the essential elements of Montessori educational philosophy and theory, focusing on the integration, development, and maintenance of the four characteristics of normalization (concentration, work, discipline, sociability) into adulthood. Discusses Montessori's view that development and retention of these positive characteristics could be…

3. AERIAL VIEW, LOOKING SOUTH, OF BUILDING 371 BASEMENT UNDER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. AERIAL VIEW, LOOKING SOUTH, OF BUILDING 371 BASEMENT UNDER CONSTRUCTION. THE BASEMENT HOUSES HEATING, VENTILATION, AND AIR CONDITIONING EQUIPMENT AND MECHANICAL UTILITIES, THE UPPER PART OF THE PLUTONIUM STORAGE VAULT AND MAINTENANCE BAY, AND SMALL PLUTONIUM PROCESSING AREAS. THE BASEMENT LEVEL IS DIVIDED INTO NEARLY EQUAL NORTH AND SOUTH PARTS BY THE UPPER PORTION OF THE PLUTONIUM STORAGE VAULT. (10/7/74) - Rocky Flats Plant, Plutonium Recovery Facility, Northwest portion of Rocky Flats Plant, Golden, Jefferson County, CO

6. VIEW LOOKING NORTH ON SIXTH STREET, ACROSS CENTRAL AVENUE. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. VIEW LOOKING NORTH ON SIXTH STREET, ACROSS CENTRAL AVENUE. THE BUILDING ON THE RIGHT IS BUILDING 551, BUILT IN 1953 AS A WAREHOUSE AND METAL FABRICATION SHOP. THE BUILDING ON THE LEFT IS BUILDING 334, ALSO BUILT IN 1953, AS THE ELECTRICAL AND GENERAL MAINTENANCE SHOP. IN THE CENTER OF THE PHOTOGRAPH IN THE BACKGROUND IS BUILDING 374, THE AQUEOUS PROCESS WASTE TREATMENT PLANT. - Rocky Flats Plant, Bounded by Indiana Street & Routes 93, 128 & 72, Golden, Jefferson County, CO

20. VIEW OF THE BASEMENT FLOOR PLAN. THE BASEMENT AREA ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. VIEW OF THE BASEMENT FLOOR PLAN. THE BASEMENT AREA INCLUDES A UTILITY ROOM, PROCESS WASTE STORAGE AND MAINTENANCE AREAS, AND THE ENTRANCE TO AN UNDERGROUND TUNNEL LEADING TO BUILDING 881. THE ORIGINAL DRAWING HAS BEEN ARCHIVED ON MICROFILM. THE DRAWING WAS REPRODUCED AT THE BEST QUALITY POSSIBLE. LETTERS AND NUMBERS IN THE CIRCLES INDICATE FOOTER AND/OR COLUMN LOCATIONS. - Rocky Flats Plant, Uranium Rolling & Forming Operations, Southeast section of plant, southeast quadrant of intersection of Central Avenue & Eighth Street, Golden, Jefferson County, CO

Maintenance Resources Evaluation Technique.

DTIC Science & Technology

1999-03-01

variable Z; P-6 BIBLIOGRAPHY Argentine Air Force. Reglamento de Conduction Logistica RAC 9 (Logistics Management Regulation). Estado Mayor General de ...other hand, too many resources are expensive to acquire and maintain and difficult to transport . 1-1 Sizing the means needed to accomplish its...functional areas (maintenance, supply/inventory, transportation , etc), methodologies of operations research (simulation, mathematical programming

Safety and maintenance engineering: A compilation

NASA Technical Reports Server (NTRS)

1974-01-01

A compilation is presented for the dissemination of information on technological developments which have potential utility outside the aerospace and nuclear communities. Safety of personnel engaged in the handling of hazardous materials and equipment, protection of equipment from fire, high wind, or careless handling by personnel, and techniques for the maintenance of operating equipment are reported.

Trace analysis in the food and beverage industry by capillary gas chromatography: system performance and maintenance.

PubMed

Hayes, M A

1988-04-01

Gas chromatography (GC) is the most widely used analytical technique in the food and beverage industry. This paper addresses the problems of sample preparation and system maintenance to ensure the most sensitive, durable, and efficient results for trace analysis by GC in this industry.

The Effect of Alternative Training Methods on the Trouble-Shooting Performances of Maintenance Technicians.

ERIC Educational Resources Information Center

Schorgmayer, Helmut; Swanson, Richard A.

Results of a study to determine the effects of conceptual versus specific (traditional) training techniques on the trouble-shooting performance of maintenance technicians are presented. The research subjects were students at Bowling Green State University and citizens in Northwest Ohio with no post high school technical coursework. Those that…

Maintenance and testing of anodized aluminum mirrors on the Whipple 10 m Whipple Telescope

NASA Astrophysics Data System (ADS)

Badran, H. M.; Weekes, T. C.

2001-08-01

Threshold energy sensitivity depends not only on the high reflectivity of the mirrors used in atmospheric Cherenkov telescopes but also on the maintenance of this reflectivity over months/years. The successful application of a mirror maintenance technique depends on the type of mirror coating and the contamination that must be removed. The uncovered mirrors in use on the 10-m Whipple gamma-ray telescope are anodized aluminum mirrors. A standard cleaning technique for such mirrors is not available. With the aim of extending the life of the aluminum coating exposed to the Mt ˙Hopkins environment, several cleaning procedures were tested on mirrors that had been exposed for three years. Evaluation of the most effective cleaners is presented. Preliminary results are also presented from a long-term experiment using newly coated mirrors at the proposed VERITAS site and at the current 10 m site. This experiment is designed to reveal the rates at which the reflectance degrades as a function of time, depth of anodization, storage direction, degree of covering, and maintenance procedures.

Clustering techniques: measuring the performance of contract service providers.

PubMed

Cruz, Antonio Miguel; Perilla, Sandra Patricia Usaquén; Pabón, Nidia Nelly Vanegas

2010-01-01

This paper investigates the use of clustering technique to characterize the providers of maintenance services in a health-care institution according to their performance. A characterization of the inventory of equipment from seven pilot areas was carried out first (including 264 medical devices). The characterization study concluded that the inventory on a whole is old [exploitation time (ET)/useful life (UL) average is 0.78] and has high maintenance service costs relative to the original cost of acquisition (service cost /acquisition cost average 8.61%). A monitoring of the performance of maintenance service providers was then conducted. The variables monitored were response time (RT), service time (ST), availability, and turnaround time (TAT). Finally, the study grouped maintenance service providers into clusters according to performance. The study grouped maintenance service providers into the following clusters. Cluster 0: Identified with the best performance, the lowest values of TAT, RT, and ST, with an average TAT value of 1.46 days; Clusters 1 and 2: Identified with the poorest performance, highest values of TAT, RT, and ST, and an average TAT value of 9.79 days; and Cluster 3: Identified by medium-quality performance, intermediate values of TAT, RT, and ST, and an average TAT value of 2.56 days.

Online Condition Monitoring of Bearings to Support Total Productive Maintenance in the Packaging Materials Industry.

PubMed

Gligorijevic, Jovan; Gajic, Dragoljub; Brkovic, Aleksandar; Savic-Gajic, Ivana; Georgieva, Olga; Di Gennaro, Stefano

2016-03-01

The packaging materials industry has already recognized the importance of Total Productive Maintenance as a system of proactive techniques for improving equipment reliability. Bearing faults, which often occur gradually, represent one of the foremost causes of failures in the industry. Therefore, detection of their faults in an early stage is quite important to assure reliable and efficient operation. We present a new automated technique for early fault detection and diagnosis in rolling-element bearings based on vibration signal analysis. Following the wavelet decomposition of vibration signals into a few sub-bands of interest, the standard deviation of obtained wavelet coefficients is extracted as a representative feature. Then, the feature space dimension is optimally reduced to two using scatter matrices. In the reduced two-dimensional feature space the fault detection and diagnosis is carried out by quadratic classifiers. Accuracy of the technique has been tested on four classes of the recorded vibrations signals, i.e., normal, with the fault of inner race, outer race, and ball operation. The overall accuracy of 98.9% has been achieved. The new technique can be used to support maintenance decision-making processes and, thus, to increase reliability and efficiency in the industry by preventing unexpected faulty operation of bearings.

Online Condition Monitoring of Bearings to Support Total Productive Maintenance in the Packaging Materials Industry

PubMed Central

Gligorijevic, Jovan; Gajic, Dragoljub; Brkovic, Aleksandar; Savic-Gajic, Ivana; Georgieva, Olga; Di Gennaro, Stefano

2016-01-01

The packaging materials industry has already recognized the importance of Total Productive Maintenance as a system of proactive techniques for improving equipment reliability. Bearing faults, which often occur gradually, represent one of the foremost causes of failures in the industry. Therefore, detection of their faults in an early stage is quite important to assure reliable and efficient operation. We present a new automated technique for early fault detection and diagnosis in rolling-element bearings based on vibration signal analysis. Following the wavelet decomposition of vibration signals into a few sub-bands of interest, the standard deviation of obtained wavelet coefficients is extracted as a representative feature. Then, the feature space dimension is optimally reduced to two using scatter matrices. In the reduced two-dimensional feature space the fault detection and diagnosis is carried out by quadratic classifiers. Accuracy of the technique has been tested on four classes of the recorded vibrations signals, i.e., normal, with the fault of inner race, outer race, and ball operation. The overall accuracy of 98.9% has been achieved. The new technique can be used to support maintenance decision-making processes and, thus, to increase reliability and efficiency in the industry by preventing unexpected faulty operation of bearings. PMID:26938541

Culture and Wellbeing: The Case of Indigenous Australians

ERIC Educational Resources Information Center

Dockery, Alfred Michael

2010-01-01

A recurring theme in Indigenous affairs in Australia is a tension between maintenance of Indigenous culture and achievement of socio-economic "equity": essentially "self-determination" versus "assimilation". Implicit in this tension is the view that attachment to traditional cultures and lifestyles is a hindrance to…

38. Photocopy of photograph (Pentran file), photographer unknown. Bus garage ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

38. Photocopy of photograph (Pentran file), photographer unknown. Bus garage to left now demolished. Trolley car drivers, maintenance personnel and management staff in 1915. VIEW SOUTH - Newport News & Old Point Railway & Electric Company, Trolley Barn & Administration Building, 3400 Victoria Boulevard, Hampton, Hampton, VA

Maintenance and suppression of chaos by weak harmonic perturbations: a unified view.

PubMed

Chacón, R

2001-02-26

General results concerning maintenance or enhancement of chaos are presented for dissipative systems subjected to two harmonic perturbations (one chaos inducing and the other chaos enhancing). The connection with previous results on chaos suppression is also discussed in a general setting. It is demonstrated that, in general, a second harmonic perturbation can reliably play an enhancer or inhibitor role by solely adjusting its initial phase. Numerical results indicate that general theoretical findings concerning periodic chaos-inducing perturbations also work for aperiodic chaos-inducing perturbations, and in arrays of identical chaotic coupled oscillators.

STAR (Simple Targeted Arterial Rendering) Technique: a Novel and Simple Method to Visualize the Fetal Cardiac Outflow Tracts

PubMed Central

Yeo, Lami; Romero, Roberto; Jodicke, Cristiano; Kim, Sun Kwon; Gonzalez, Juan M.; Oggè, Giovanna; Lee, Wesley; Kusanovic, Juan Pedro; Vaisbuch, Edi; Hassan, Sonia S.

2010-01-01

Objective To describe a novel and simple technique (STAR: Simple Targeted Arterial Rendering) to visualize the fetal cardiac outflow tracts from dataset volumes obtained with spatiotemporal image correlation (STIC) and applying a new display technology (OmniView). Methods We developed a technique to image the outflow tracts by drawing three dissecting lines through the four-chamber view of the heart contained in a STIC volume dataset. Each line generated the following plane: 1) Line 1: ventricular septum “en face” with both great vessels (pulmonary artery anterior to the aorta); 2) Line 2: pulmonary artery with continuation into the longitudinal view of the ductal arch; and 3) Line 3: long axis view of the aorta arising from the left ventricle. The pattern formed by all 3 lines intersecting approximately through the crux of the heart resembles a “star”. The technique was then tested in 50 normal hearts (15.3 – 40.4 weeks of gestation). To determine if the technique could identify planes that departed from the normal images, we tested the technique in 4 cases with proven congenital heart defects (ventricular septal defect, transposition of great vessels, tetralogy of Fallot, and pulmonary atresia with intact ventricular septum). Results The STAR technique was able to generate the intended planes in all 50 normal cases. In the abnormal cases, the STAR technique allowed identification of the ventricular septal defect, demonstrated great vessel anomalies, and displayed views that deviated from what was expected from the examination of normal hearts. Conclusions This novel and simple technique can be used to visualize the outflow tracts and ventricular septum “en face” in normal fetal hearts. The inability to obtain expected views or the appearance of abnormal views in the generated planes should raise the index of suspicion for congenital heart disease involving the great vessels and/or the ventricular septum. The STAR technique may simplify examination of the fetal heart and could reduce operator dependency. PMID:20878672

UH-1 Helicopter Mechanic (MOS 67N20) Job Description Survey: Background, Training, and General Maintenance Activities.

ERIC Educational Resources Information Center

Schulz, Russel E.; And Others

The report, the first of two documents examining the relationship among job requirements, training, and manpower considerations for Army aviation maintenance Personnel, discusses the development of task data gathering techniques and procedures for incorporating this data into training programs for the UH-1 helicopter mechanic sPecialty (MOS…

Industrial Maintenance Series. Educational Resources for the Machine Tool Industry. Course Syllabi, Instructor's Handbook, [and] Student Laboratory Manual.

ERIC Educational Resources Information Center

Texas State Technical Coll. System, Waco.

This package consists of course syllabi, an instructor's handbook, and a student laboratory manual for a 1-year vocational training program to prepare students for entry-level employment as industrial maintenance technicians. The program was developed through a modification of the DACUM (Developing a Curriculum) technique. The course syllabi…

A review on prognostic techniques for non-stationary and non-linear rotating systems

NASA Astrophysics Data System (ADS)

Kan, Man Shan; Tan, Andy C. C.; Mathew, Joseph

2015-10-01

The field of prognostics has attracted significant interest from the research community in recent times. Prognostics enables the prediction of failures in machines resulting in benefits to plant operators such as shorter downtimes, higher operation reliability, reduced operations and maintenance cost, and more effective maintenance and logistics planning. Prognostic systems have been successfully deployed for the monitoring of relatively simple rotating machines. However, machines and associated systems today are increasingly complex. As such, there is an urgent need to develop prognostic techniques for such complex systems operating in the real world. This review paper focuses on prognostic techniques that can be applied to rotating machinery operating under non-linear and non-stationary conditions. The general concept of these techniques, the pros and cons of applying these methods, as well as their applications in the research field are discussed. Finally, the opportunities and challenges in implementing prognostic systems and developing effective techniques for monitoring machines operating under non-stationary and non-linear conditions are also discussed.

Modeling of ETL-Processes and Processed Information in Clinical Data Warehousing.

PubMed

Tute, Erik; Steiner, Jochen

2018-01-01

Literature describes a big potential for reuse of clinical patient data. A clinical data warehouse (CDWH) is a means for that. To support management and maintenance of processes extracting, transforming and loading (ETL) data into CDWHs as well as to ease reuse of metadata between regular IT-management, CDWH and secondary data users by providing a modeling approach. Expert survey and literature review to find requirements and existing modeling techniques. An ETL-modeling-technique was developed extending existing modeling techniques. Evaluation by exemplarily modeling existing ETL-process and a second expert survey. Nine experts participated in the first survey. Literature review yielded 15 included publications. Six existing modeling techniques were identified. A modeling technique extending 3LGM² and combining it with openEHR information models was developed and evaluated. Seven experts participated in the evaluation. The developed approach can help in management and maintenance of ETL-processes and could serve as interface between regular IT-management, CDWH and secondary data users.

The health maintenance organization strategy: a corporate takeover of health services delivery.

PubMed

Salmon, J W

1975-01-01

This paper presents a political economic framework for viewing the social organization of the delivery of health care servies and predicting a qualitatively different institutional configuration involving the health maintenance organization. The principal forces impacting American capitalism today are leading to a fundamental restructuring for increased social efficiency of the entire social welfare sector, including the health services industry. The method to achieve this restructuring involves health policy directed at raising the contribution to the social surplus from the delivery of health care services and eventual corporate domination. The health maintenance organization conceptualization is examined with suggestions as to how the HMO strategy promoted by the state leads to this corporate takeover. The mechanism and extent of the present corporate involvement are examined and implications of health services as a social control mechanism are presented.

Pastor and Lay Leader Perceptions of Barriers and Supports to HIV Ministry Maintenance in an African American Church

PubMed Central

2013-01-01

Abstract Clergy and lay leaders have a pivotal role in the development and maintenance of HIV Ministries within the African American church. However, little is known about the actual roles these men and women have, the barriers they face and the supports they have found in the development and maintenance of an HIV Ministry. The purpose of this study is to examine the role, barriers and supports clergy and lay leaders experienced in the development of a long-standing HIV ministry in an African American church. These data were gathered from a larger ethnographic study, which examined the role of religious culture in the development, implementation and maintenance of an HIV ministry. Data for this study were collected through in-depth semi-structured interviews. Results revealed that the primary role of clergy and lay leaders involved dispelling myths surrounding HIV and ensuring congregational support. The primary barrier to the development and maintenance was views regarding sexuality. The primary support was their relationships with congregants that lived with HIV and AIDS. This information can assist in developing interventions to enhance the African American church movement toward HIV ministries. PMID:22870846

Pastor and lay leader perceptions of barriers and supports to HIV ministry maintenance in an African American church.

PubMed

Stewart, Jennifer M

2014-04-01

Clergy and lay leaders have a pivotal role in the development and maintenance of HIV Ministries within the African American church. However, little is known about the actual roles these men and women have, the barriers they face and the supports they have found in the development and maintenance of an HIV Ministry. The purpose of this study is to examine the role, barriers and supports clergy and lay leaders experienced in the development of a long-standing HIV ministry in an African American church. These data were gathered from a larger ethnographic study, which examined the role of religious culture in the development, implementation and maintenance of an HIV ministry. Data for this study were collected through in-depth semi-structured interviews. Results revealed that the primary role of clergy and lay leaders involved dispelling myths surrounding HIV and ensuring congregational support. The primary barrier to the development and maintenance was views regarding sexuality. The primary support was their relationships with congregants that lived with HIV and AIDS. This information can assist in developing interventions to enhance the African American church movement toward HIV ministries.

Optimal maintenance of a multi-unit system under dependencies

NASA Astrophysics Data System (ADS)

Sung, Ho-Joon

The availability, or reliability, of an engineering component greatly influences the operational cost and safety characteristics of a modern system over its life-cycle. Until recently, the reliance on past empirical data has been the industry-standard practice to develop maintenance policies that provide the minimum level of system reliability. Because such empirically-derived policies are vulnerable to unforeseen or fast-changing external factors, recent advancements in the study of topic on maintenance, which is known as optimal maintenance problem, has gained considerable interest as a legitimate area of research. An extensive body of applicable work is available, ranging from those concerned with identifying maintenance policies aimed at providing required system availability at minimum possible cost, to topics on imperfect maintenance of multi-unit system under dependencies. Nonetheless, these existing mathematical approaches to solve for optimal maintenance policies must be treated with caution when considered for broader applications, as they are accompanied by specialized treatments to ease the mathematical derivation of unknown functions in both objective function and constraint for a given optimal maintenance problem. These unknown functions are defined as reliability measures in this thesis, and theses measures (e.g., expected number of failures, system renewal cycle, expected system up time, etc.) do not often lend themselves to possess closed-form formulas. It is thus quite common to impose simplifying assumptions on input probability distributions of components' lifetime or repair policies. Simplifying the complex structure of a multi-unit system to a k-out-of-n system by neglecting any sources of dependencies is another commonly practiced technique intended to increase the mathematical tractability of a particular model. This dissertation presents a proposal for an alternative methodology to solve optimal maintenance problems by aiming to achieve the same end-goals as Reliability Centered Maintenance (RCM). RCM was first introduced to the aircraft industry in an attempt to bridge the gap between the empirically-driven and theory-driven approaches to establishing optimal maintenance policies. Under RCM, qualitative processes that enable the prioritizing of functions based on the criticality and influence would be combined with mathematical modeling to obtain the optimal maintenance policies. Where this thesis work deviates from RCM is its proposal to directly apply quantitative processes to model the reliability measures in optimal maintenance problem. First, Monte Carlo (MC) simulation, in conjunction with a pre-determined Design of Experiments (DOE) table, can be used as a numerical means of obtaining the corresponding discrete simulated outcomes of the reliability measures based on the combination of decision variables (e.g., periodic preventive maintenance interval, trigger age for opportunistic maintenance, etc.). These discrete simulation results can then be regressed as Response Surface Equations (RSEs) with respect to the decision variables. Such an approach to represent the reliability measures with continuous surrogate functions (i.e., the RSEs) not only enables the application of the numerical optimization technique to solve for optimal maintenance policies, but also obviates the need to make mathematical assumptions or impose over-simplifications on the structure of a multi-unit system for the sake of mathematical tractability. The applicability of the proposed methodology to a real-world optimal maintenance problem is showcased through its application to a Time Limited Dispatch (TLD) of Full Authority Digital Engine Control (FADEC) system. In broader terms, this proof-of-concept exercise can be described as a constrained optimization problem, whose objective is to identify the optimal system inspection interval that guarantees a certain level of availability for a multi-unit system. A variety of reputable numerical techniques were used to model the problem as accurately as possible, including algorithms for the MC simulation, imperfect maintenance model from quasi renewal processes, repair time simulation, and state transition rules. Variance Reduction Techniques (VRTs) were also used in an effort to enhance MC simulation efficiency. After accurate MC simulation results are obtained, the RSEs are generated based on the goodness-of-fit measure to yield as parsimonious model as possible to construct the optimization problem. Under the assumption of constant failure rate for lifetime distributions, the inspection interval from the proposed methodology was found to be consistent with the one from the common approach used in industry that leverages Continuous Time Markov Chain (CTMC). While the latter does not consider maintenance cost settings, the proposed methodology enables an operator to consider different types of maintenance cost settings, e.g., inspection cost, system corrective maintenance cost, etc., to result in more flexible maintenance policies. When the proposed methodology was applied to the same TLD of FADEC example, but under the more generalized assumption of strictly Increasing Failure Rate (IFR) for lifetime distribution, it was shown to successfully capture component wear-out, as well as the economic dependencies among the system components.

Spacelab experiments on space motion sickness

NASA Technical Reports Server (NTRS)

Oman, C. M.

1987-01-01

Recent research results from ground and flight experiments on motion sickness and space sickness conducted by the Man Vehicle Laboratory are reviewed. New tools developed include a mathematical model for motion sickness, a method for quantitative measurements of skin pallor and blush in ambulatory subjects, and a magnitude estimation technique for ratio scaling of nausea or discomfort. These have been used to experimentally study the time course of skin pallor and subjective symptoms in laboratory motion sickness. In prolonged sickness, subjects become hypersensitive to nauseogenic stimuli. Results of a Spacelab-1 flight experiment are described in which four observers documented the stimulus factors for and the symptoms/signs of space sickness. The clinical character of space sickness differs somewhat from acute laboratory motion sickness. However SL-1 findings support the view that space sickness is fundamentally a motion sickness. Symptoms were subjectively alleviated by head movement restriction, maintenance of a familiar orientation with respect to the visual environment, and wedging between or strapping onto surfaces which provided broad contact cues confirming the absence of body motion.

Spacelab experiments on space motion sickness

NASA Technical Reports Server (NTRS)

Oman, C. M.

1985-01-01

Recent research results from ground and flight experiments on motion sickness and space sickness conducted by the Man Vehicle Laboratory are reviewed. New tools developed include a mathematical model for motion sickness, a method for quantitative measurement of skin pallor and blush in ambulatory subjects, and a magnitude estimation technique for ratio scaling of nausea or discomfort. These have been used to experimentally study the time course of skin pallor and subjective symptoms in laboratory motion sickness. In prolonged sickness, subjects become hypersensitive to nauseogenic stimuli. Results of a Spacelab-1 flight experiment are described in which 4 observers documented the stimulus factors for and the symptoms/signs of space sickness. The clinical character of space sickness differs somewhat from acute laboratory motion sickness. However SL-1 findings support the view that space sickness is fundamentally a motion sickness. Symptoms were subjectively alleviated by head movement restriction, maintenance of a familiar orientation with respect to the visual environment, and wedging between or strapping onto surfaces which provided broad contact cues confirming the absence of body motion.

Monitoring scaling and dental calculus removal with an optical fluorescence system

NASA Astrophysics Data System (ADS)

Sivieri-Araujo, G.; Fontana, C. R.; Costa, M. M.; Rastelli, A. N. S.; Pereira, L. P. C.; Kurachi, C.; Bagnato, V. S.

2014-08-01

Fluorescence results from a process that occurs under certain conditions in molecules known as fluorophores, fluorochromes or fluorescent dyes when they absorb light. The molecule is excited to a higher energy state and emits fluorescent light. The emission wavelength is always higher than the excitation wavelength. Optical diagnoses by fluorescence can be used in medicine and dentistry. It does not cause injury to tissues because it is a noninvasive method and can add benefits to clinical treatments. The aim of this case report was to apply an optical fluorescence system for wide-field image viewing and visual monitoring of the management of plaque and dental calculus before and after periodontal scaling to improve the diagnoses and follow-up of patients with periodontal disease. The results suggest that it is possible to observe, with a fluorescence system, residual plaque and calculus that were not easily seen by the naked eye during oral inspection. Thus, the optical technique can potentially improve periodontal screening efforts, especially in patients undergoing periodontal maintenance.

Improvements in Space Surveillance Processing for Wide Field of View Optical Sensors

NASA Astrophysics Data System (ADS)

Sydney, P.; Wetterer, C.

2014-09-01

For more than a decade, an autonomous satellite tracking system at the Air Force Maui Optical and Supercomputing (AMOS) observatory has been generating routine astrometric measurements of Earth-orbiting Resident Space Objects (RSOs) using small commercial telescopes and sensors. Recent work has focused on developing an improved processing system, enhancing measurement performance and response while supporting other sensor systems and missions. This paper will outline improved techniques in scheduling, detection, astrometric and photometric measurements, and catalog maintenance. The processing system now integrates with Special Perturbation (SP) based astrodynamics algorithms, allowing covariance-based scheduling and more precise orbital estimates and object identification. A merit-based scheduling algorithm provides a global optimization framework to support diverse collection tasks and missions. The detection algorithms support a range of target tracking and camera acquisition rates. New comprehensive star catalogs allow for more precise astrometric and photometric calibrations including differential photometry for monitoring environmental changes. This paper will also examine measurement performance with varying tracking rates and acquisition parameters.

Spacelab experiments on space motion sickness.

PubMed

Oman, C M

1987-01-01

Recent research results from ground and flight experiments on motion sickness and space sickness conducted by the Man Vehicle Laboratory are reviewed. New tools developed include a mathematical model for motion sickness, a method for quantitative measurements of skin pallor and blush in ambulatory subjects, and a magnitude estimation technique for ratio scaling of nausea or discomfort. These have been used to experimentally study the time course of skin pallor and subjective symptoms in laboratory motion sickness. In prolonged sickness, subjects become hypersensitive to nauseogenic stimuli. Results of a Spacelab-1 flight experiment are described in which four observers documented the stimulus factors for and the symptoms/signs of space sickness. The clinical character of space sickness differs somewhat from acute laboratory motion sickness. However SL-1 findings support the view that space sickness is fundamentally a motion sickness. Symptoms were subjectively alleviated by head movement restriction, maintenance of a familiar orientation with respect to the visual environment, and wedging between or strapping onto surfaces which provided broad contact cues confirming the absence of body motion.

Metabolic Phenotyping of Diet and Dietary Intake.

PubMed

Brignardello, J; Holmes, E; Garcia-Perez, I

Nutrition provides the building blocks for growth, repair, and maintenance of the body and is key to maintaining health. Exposure to fast foods, mass production of dietary components, and wider importation of goods have challenged the balance between diet and health in recent decades, and both scientists and clinicians struggle to characterize the relationship between this changing dietary landscape and human metabolism with its consequent impact on health. Metabolic phenotyping of foods, using high-density data-generating technologies to profile the biochemical composition of foods, meals, and human samples (pre- and postfood intake), can be used to map the complex interaction between the diet and human metabolism and also to assess food quality and safety. Here, we outline some of the techniques currently used for metabolic phenotyping and describe key applications in the food sciences, ending with a broad outlook at some of the newer technologies in the field with a view to exploring their potential to address some of the critical challenges in nutritional science. © 2017 Elsevier Inc. All rights reserved.

20. OVERVIEW OF SAR3 COMPLEX, SHOWING FORMER RESIDENTIAL AREA, SAR3 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. OVERVIEW OF SAR-3 COMPLEX, SHOWING FORMER RESIDENTIAL AREA, SAR-3 SWITCH RACK, MAINTENANCE YARD, AND GREENSPOT BRIDGE. NOTE ALSO LARGE PIPE CONDUCTING TAILRACE WATER INTO IRRIGATION SYSTEM. VIEW TO SOUTHWEST. - Santa Ana River Hydroelectric System, Redlands, San Bernardino County, CA

EDUCATING THE PUBLIC ABOUT ON-SITE WASTEWATER TREATMENT SYSTEM MAINTENANCE AND WATERSHED PROTECTION (R823466)

EPA Science Inventory

The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

Comparative Theories of Social Change.

ERIC Educational Resources Information Center

Peter, Hollis W.; And Others

This symposium report contains various statements of the theory of change and societal growth and maintenance viewed from the perspectives of major social disciplines. Comparative theories in these areas can provide guidelines for predicting, planning, and carrying out social development programs. The theme of the symposium was the problem of…

Methodology of decreasing software complexity using ontology

NASA Astrophysics Data System (ADS)

DÄ browska-Kubik, Katarzyna

2015-09-01

In this paper a model of web application`s source code, based on the OSD ontology (Ontology for Software Development), is proposed. This model is applied to implementation and maintenance phase of software development process through the DevOntoCreator tool [5]. The aim of this solution is decreasing software complexity of that source code, using many different maintenance techniques, like creation of documentation, elimination dead code, cloned code or bugs, which were known before [1][2]. Due to this approach saving on software maintenance costs of web applications will be possible.

Fault isolation techniques

NASA Technical Reports Server (NTRS)

Dumas, A.

1981-01-01

Three major areas that are considered in the development of an overall maintenance scheme of computer equipment are described. The areas of concern related to fault isolation techniques are: the programmer (or user), company and its policies, and the manufacturer of the equipment.

Generation Y New Zealand Registered Nurses' views about nursing work: a survey of motivation and maintenance factors.

PubMed

Jamieson, Isabel; Kirk, Ray; Wright, Sarah; Andrew, Cathy

2015-07-01

The aim of this article was to report on the analysis of qualitative, open text data, received from a national on-line survey of what factors Generation Y New Zealand Registered Nurses wish to change about nursing and consideration of the potential policy and practice impacts of these requests on their retention. Prior to the economic recession of 2007-2010, the growing shortage of nurses in New Zealand presented a serious concern for the healthcare workforce. Given the ageing New Zealand nursing workforce, an ageing population and the increasing demands for health care, it is imperative that issues of retention of Generation Y nurses are resolved prior to the imminent retirement of more experienced nurses. A descriptive exploratory approach using a national wide, on-line survey, eliciting both quantitative and qualitative data was used. The survey, conducted from August 2009-January 2010, collected data from Generation Y New Zealand Registered Nurses ( n  =   358) about their views about nursing, work and career. Herzberg's Motivation-Hygiene theory was used as the framework for the analysis of the open text data. The factors that nurses wanted changed were skewed towards Herzberg's hygiene-maintenance factors rather than motivating factors. This is of concern because hygiene-maintenance factors are considered to be dissatisfiers that are likely to push workers to another employment option.

Duck Valley Reservoirs Fish Stocking and Operation and Maintenance, 2005-2006 Annual Progress Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sellman, Jake; Dykstra, Tim

The Duck Valley Reservoirs Fish Stocking and Operations and Maintenance (DV Fisheries) project is an ongoing resident fish program designed to enhance both subsistence fishing, educational opportunities for Tribal members of the Shoshone-Paiute Tribes, and recreational fishing facilities for non-Tribal members. In addition to stocking rainbow trout (Oncorhynchus mykiss) in Mountain View, Lake Billy Shaw, and Sheep Creek Reservoirs, the program also intends to afford and maintain healthy aquatic conditions for fish growth and survival, to provide superior facilities with wilderness qualities to attract non-Tribal angler use, and to offer clear, consistent communication with the Tribal community about this projectmore » as well as outreach and education within the region and the local community. Tasks for this performance period are divided into operations and maintenance plus monitoring and evaluation. Operation and maintenance of the three reservoirs include fences, roads, dams and all reservoir structures, feeder canals, water troughs and stock ponds, educational signs, vehicles and equipment, and outhouses. Monitoring and evaluation activities included creel, gillnet, wildlife, and bird surveys, water quality and reservoir structures monitoring, native vegetation planting, photo point documentation, control of encroaching exotic vegetation, and community outreach and education. The three reservoirs are monitored in terms of water quality and fishery success. Sheep Creek Reservoir was the least productive as a result of high turbidity levels and constraining water quality parameters. Lake Billy Shaw trout were in poorer condition than in previous years potentially as a result of water quality or other factors. Mountain View Reservoir trout exhibit the best health of the three reservoirs and was the only reservoir to receive constant flows of water.« less

Respirators, internal dose, and Oyster Creek

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michal, R.

1996-06-01

This article looks at the experience of Oyster Creek in relaxing the requirements for the use of respirators in all facets of plant maintenance, on the overall dose received by plant maintenance personnel. For Roger Shaw, director of radiological controls for three years at GPU Nuclear Corporation`s Oyster Creek nuclear plant the correct dose balance is determined on a job-by-job basis: Does the job require a respirator, which is an effective means of decreasing worker inhalation of airborne radioactive particles? Will wearing a respirator slow down a worker, consequently increasing whole body radiation exposure by prolonging the time spent inmore » fields of high external radiation? How does respiratory protection affect worker safety and to what degree? While changes to the Nuclear Regulatory Commission`s 10CFR20 have updated the radiation protection requirements for the nuclear industry, certain of the revisions have been directed specifically at reducing worker dose, Shaw said. {open_quotes}It basically delineates that dose is dose,{close_quotes} Shaw said, {open_quotes}regardless of whether it is acquired externally or internally.{close_quotes} The revision of Part 20 changed the industry`s attitude toward internal dose, which had always been viewed negatively. {open_quotes}Internal dose was always seen as preventable by wearing respirators and by using engineering techniques such as ventilation control and decontamination,{close_quotes} Shaw said, {open_quotes}whereas external dose, although reduced where practical, was seen as a fact of the job.{close_quotes}« less

An Embedded Wireless Sensor Network with Wireless Power Transmission Capability for the Structural Health Monitoring of Reinforced Concrete Structures

PubMed Central

Gallucci, Luca; Menna, Costantino; Angrisani, Leopoldo; Asprone, Domenico

2017-01-01

Maintenance strategies based on structural health monitoring can provide effective support in the optimization of scheduled repair of existing structures, thus enabling their lifetime to be extended. With specific regard to reinforced concrete (RC) structures, the state of the art seems to still be lacking an efficient and cost-effective technique capable of monitoring material properties continuously over the lifetime of a structure. Current solutions can typically only measure the required mechanical variables in an indirect, but economic, manner, or directly, but expensively. Moreover, most of the proposed solutions can only be implemented by means of manual activation, making the monitoring very inefficient and then poorly supported. This paper proposes a structural health monitoring system based on a wireless sensor network (WSN) that enables the automatic monitoring of a complete structure. The network includes wireless distributed sensors embedded in the structure itself, and follows the monitoring-based maintenance (MBM) approach, with its ABCDE paradigm, namely: accuracy, benefit, compactness, durability, and easiness of operations. The system is structured in a node level and has a network architecture that enables all the node data to converge in a central unit. Human control is completely unnecessary until the periodic evaluation of the collected data. Several tests are conducted in order to characterize the system from a metrological point of view and assess its performance and effectiveness in real RC conditions. PMID:29112128

Securing information display by use of visual cryptography.

PubMed

Yamamoto, Hirotsugu; Hayasaki, Yoshio; Nishida, Nobuo

2003-09-01

We propose a secure display technique based on visual cryptography. The proposed technique ensures the security of visual information. The display employs a decoding mask based on visual cryptography. Without the decoding mask, the displayed information cannot be viewed. The viewing zone is limited by the decoding mask so that only one person can view the information. We have developed a set of encryption codes to maintain the designed viewing zone and have demonstrated a display that provides a limited viewing zone.

Augmented Reality: A Brand New Challenge for the Assessment and Treatment of Psychological Disorders

PubMed Central

Chicchi Giglioli, Irene Alice; Pedroli, Elisa

2015-01-01

Augmented Reality is a new technological system that allows introducing virtual contents in the real world in order to run in the same representation and, in real time, enhancing the user's sensory perception of reality. From another point of view, Augmented Reality can be defined as a set of techniques and tools that add information to the physical reality. To date, Augmented Reality has been used in many fields, such as medicine, entertainment, maintenance, architecture, education, and cognitive and motor rehabilitation but very few studies and applications of AR exist in clinical psychology. In the treatment of psychological disorders, Augmented Reality has given preliminary evidence to be a useful tool due to its adaptability to the patient needs and therapeutic purposes and interactivity. Another relevant factor is the quality of the user's experience in the Augmented Reality system determined from emotional engagement and sense of presence. This experience could increase the AR ecological validity in the treatment of psychological disorders. This paper reviews the recent studies on the use of Augmented Reality in the evaluation and treatment of psychological disorders, focusing on current uses of this technology and on the specific features that delineate Augmented Reality a new technique useful for psychology. PMID:26339283

Augmented Reality: A Brand New Challenge for the Assessment and Treatment of Psychological Disorders.

PubMed

Chicchi Giglioli, Irene Alice; Pallavicini, Federica; Pedroli, Elisa; Serino, Silvia; Riva, Giuseppe

2015-01-01

Augmented Reality is a new technological system that allows introducing virtual contents in the real world in order to run in the same representation and, in real time, enhancing the user's sensory perception of reality. From another point of view, Augmented Reality can be defined as a set of techniques and tools that add information to the physical reality. To date, Augmented Reality has been used in many fields, such as medicine, entertainment, maintenance, architecture, education, and cognitive and motor rehabilitation but very few studies and applications of AR exist in clinical psychology. In the treatment of psychological disorders, Augmented Reality has given preliminary evidence to be a useful tool due to its adaptability to the patient needs and therapeutic purposes and interactivity. Another relevant factor is the quality of the user's experience in the Augmented Reality system determined from emotional engagement and sense of presence. This experience could increase the AR ecological validity in the treatment of psychological disorders. This paper reviews the recent studies on the use of Augmented Reality in the evaluation and treatment of psychological disorders, focusing on current uses of this technology and on the specific features that delineate Augmented Reality a new technique useful for psychology.

Using Balanced Scorecard (BSC) approach to improve ergonomics programs.

PubMed

Fernandes, Marcelo Vicente Forestieri

2012-01-01

The purpose of this paper is to propose foundations for a theory of using the Balanced Scorecard (BSC) methodology to improve the strategic view of ergonomics inside the organizations. This approach may help to promote a better understanding of investing on an ergonomic program to obtain good results in quality and production, as well as health maintenance. It is explained the basics of balanced scorecard, and how ergonomists could use this to work with strategic enterprises demand. Implications of this viewpoint for the development of a new methodology for ergonomics strategy views are offered.

NIMBUS-7 ERB DELMAT operators guide and maintenance manual

NASA Technical Reports Server (NTRS)

Penn, L. M.; Ardanuy, P. E.

1986-01-01

Described in detail are the ERB DELMAT algorithms used to correct the wide field-of-view channels (11, 12, 13 and 14) radiometer data. The computer software and the required operational environment are also delineated. The information and procedures required to maintain the DELMAT program are also described.

Learning Others' Point of View: Perspective Taking and Prosocial Behaviour in Preschoolers

ERIC Educational Resources Information Center

Cigala, Ada; Mori, Arianna; Fangareggi, Francesca

2015-01-01

Perspective taking, defined as the ability to assume another's perspective, can be considered a multidimensional construct which is composed of three different components: cognitive, visual and affective. This study wanted to verify the possibility of promoting perspective taking in preschoolers using ecological training. The maintenance of…

The Picture of Health. Environmental Sources of Disease.

ERIC Educational Resources Information Center

Eckholm, Erik P.

This book deals comprehensively with many of the environmental factors that endanger the attainment and maintenance of health, a condition defined as being a state of complete physical, mental, and social well-being. The author, taking a qlobal view of community life and culture, environmental factors and economic realities, examines the…

MAINTENANCE OF DISTINCT MITOCHONDRIAL DNA LINEAGES IN SYMPATRY IN COPEPOD INHABITING ESTUARINE CREEKS IN THE SOUTHEASTERN USA. (R825439)

EPA Science Inventory

The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

49 CFR 234.223 - Gate arm.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Gate arm. 234.223 Section 234.223 Transportation... Maintenance Standards § 234.223 Gate arm. Each gate arm, when in the downward position, shall extend across... clearly viewed by approaching highway users. Each gate arm shall start its downward motion not less than...

49 CFR 234.223 - Gate arm.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Gate arm. 234.223 Section 234.223 Transportation... Maintenance Standards § 234.223 Gate arm. Each gate arm, when in the downward position, shall extend across... clearly viewed by approaching highway users. Each gate arm shall start its downward motion not less than...

ISS Expedition 45 / 46 Underwater Crew Training

NASA Image and Video Library

2015-02-03

Underwater camera views of ISS Expedition 45 (Soyuz 42) crewmember Scott Kelly and ISS Expedition 46 (Soyuz 43) crewmember Kjell Lindgren during ISS Extravehicular Activity (EVA) Maintenance 9 Training (PMA/PMM Relocate) at JSC's Neutral Buoyancy Lab (NBL) Pool Deck at Sonny Carter Training Facility (SCTF). TIME magazine film crew filming activities.

Caveats, Qualms, and Quibbles: A Revisionist View of Library Automation.

ERIC Educational Resources Information Center

Cart, Michael

1987-01-01

Describes problems in the current state of library automation, including too much jargon, excessive costs, excessive implementation time, and systems that don't work. An example is given of one public library's conservative approach to library automation which husbands resources for the maintenance and expansion of print collections and…

Strategy Instruction and Maintenance of Basic Multiplication Facts through Digital Game Play

ERIC Educational Resources Information Center

Denham, André R.

2013-01-01

Formative instruction on multiplication primarily focuses on rote memorization. This leads to factual fluency, but also develops a narrow view of multiplication and hinders the development of conceptual understanding. Theory and research recommend the concurrent development of conceptual understanding and factual fluency during the initial stages…

The 1991 International Conference on Aging Aircraft and Structural Airworthiness

NASA Technical Reports Server (NTRS)

Harris, Charles E. (Editor)

1992-01-01

Technical sessions of the conference included structural performance, nondestructive evaluation, maintenance and repair, international activities, and commuter airlines. Each session was organized to provide a well-rounded view of the subject from the industry, regulatory, and research perspective. Thirty-four presentations were given by the international technical community.

Unraveling secrets of telomeres: one molecule at a time

PubMed Central

Lin, Jiangguo; Kaur, Parminder; Countryman, Preston; Opresko, Patricia L.; Wang, Hong

2016-01-01

Telomeres play important roles in maintaining the stability of linear chromosomes. Telomere maintenance involves dynamic actions of multiple proteins interacting with long repetitive sequences and complex dynamic DNA structures, such as G-quadruplexes, T-loops and t-circles. Given the heterogeneity and complexity of telomeres, single-molecule approaches are essential to fully understand the structure-function relationships that govern telomere maintenance. In this review, we present a brief overview of the principles of single-molecule imaging and manipulation techniques. We then highlight results obtained from applying these single-molecule techniques for studying structure, dynamics and functions of G-quadruplexes, telomerase, and shelterin proteins. PMID:24569170

Crack detection on wind turbine blades in an operating environment using vibro-acoustic modulation technique

NASA Astrophysics Data System (ADS)

Kim, S.; Adams, D. E.; Sohn, H.

2013-01-01

As the wind power industry has grown rapidly in the recent decade, maintenance costs have become a significant concern. Due to the high repair costs for wind turbine blades, it is especially important to detect initial blade defects before they become structural failures leading to other potential failures in the tower or nacelle. This research presents a method of detecting cracks on wind turbine blades using the Vibo-Acoustic Modulation technique. Using Vibro-Acoustic Modulation, a crack detection test is conducted on a WHISPER 100 wind turbine in its operating environment. Wind turbines provide the ideal conditions in which to utilize Vibro-Acoustic Modulation because wind turbines experience large structural vibrations. The structural vibration of the wind turbine balde was used as a pumping signal and a PZT was used to generate the probing signal. Because the non-linear portion of the dynamic response is more sensitive to the presence of a crack than the environmental conditions or operating loads, the Vibro-Acoustic Modulation technique can provide a robust structural health monitoring approach for wind turbines. Structural health monitoring can significantly reduce maintenance costs when paired with predictive modeling to minimize unscheduled maintenance.

Probabilistic modeling of condition-based maintenance strategies and quantification of its benefits for airliners

NASA Astrophysics Data System (ADS)

Pattabhiraman, Sriram

Airplane fuselage structures are designed with the concept of damage tolerance, wherein small damage are allowed to remain on the airplane, and damage that otherwise affect the safety of the structure are repaired. The damage critical to the safety of the fuselage are repaired by scheduling maintenance at pre-determined intervals. Scheduling maintenance is an interesting trade-off between damage tolerance and cost. Tolerance of larger damage would require less frequent maintenance and hence, a lower cost, to maintain a certain level of reliability. Alternatively, condition-based maintenance techniques have been developed using on-board sensors, which track damage continuously and request maintenance only when the damage size crosses a particular threshold. This effects a tolerance of larger damage than scheduled maintenance, leading to savings in cost. This work quantifies the savings of condition-based maintenance over scheduled maintenance. The work also quantifies converting the cost savings into weight savings. Structural health monitoring will need time to be able to establish itself as a stand-alone system for maintenance, due to concerns on its diagnosis accuracy and reliability. This work also investigates the effect of synchronizing structural health monitoring system with scheduled maintenance. This work uses on-board SHM equipment skip structural airframe maintenance (a subsect of scheduled maintenance), whenever deemed unnecessary while maintain a desired level of safety of structure. The work will also predict the necessary maintenance for a fleet of airplanes, based on the current damage status of the airplanes. The work also analyses the possibility of false alarm, wherein maintenance is being requested with no critical damage on the airplane. The work use SHM as a tool to identify lemons in a fleet of airplanes. Lemons are those airplanes that would warrant more maintenance trips than the average behavior of the fleet.

Calibration Plans for the Multi-angle Imaging SpectroRadiometer (MISR)

NASA Astrophysics Data System (ADS)

Bruegge, C. J.; Duval, V. G.; Chrien, N. L.; Diner, D. J.

1993-01-01

The EOS Multi-angle Imaging SpectroRadiometer (MISR) will study the ecology and climate of the Earth through acquisition of global multi-angle imagery. The MISR employs nine discrete cameras, each a push-broom imager. Of these, four point forward, four point aft and one views the nadir. Absolute radiometric calibration will be obtained pre-flight using high quantum efficiency (HQE) detectors and an integrating sphere source. After launch, instrument calibration will be provided using HQE detectors in conjunction with deployable diffuse calibration panels. The panels will be deployed at time intervals of one month and used to direct sunlight into the cameras, filling their fields-of-view and providing through-the-optics calibration. Additional techniques will be utilized to reduce systematic errors, and provide continuity as the methodology changes with time. For example, radiation-resistant photodiodes will also be used to monitor panel radiant exitance. These data will be acquired throughout the five-year mission, to maintain calibration in the latter years when it is expected that the HQE diodes will have degraded. During the mission, it is planned that the MISR will conduct semi-annual ground calibration campaigns, utilizing field measurements and higher resolution sensors (aboard aircraft or in-orbit platforms) to provide a check of the on-board hardware. These ground calibration campaigns are limited in number, but are believed to be the key to the long-term maintenance of MISR radiometric calibration.

A dual-view digital tomosynthesis imaging technique for improved chest imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhong, Yuncheng; Lai, Chao-Jen; Wang, Tianpeng

Purpose: Digital tomosynthesis (DTS) has been shown to be useful for reducing the overlapping of abnormalities with anatomical structures at various depth levels along the posterior–anterior (PA) direction in chest radiography. However, DTS provides crude three-dimensional (3D) images that have poor resolution in the lateral view and can only be displayed with reasonable quality in the PA view. Furthermore, the spillover of high-contrast objects from off-fulcrum planes generates artifacts that may impede the diagnostic use of the DTS images. In this paper, the authors describe and demonstrate the use of a dual-view DTS technique to improve the accuracy of themore » reconstructed volume image data for more accurate rendition of the anatomy and slice images with improved resolution and reduced artifacts, thus allowing the 3D image data to be viewed in views other than the PA view. Methods: With the dual-view DTS technique, limited angle scans are performed and projection images are acquired in two orthogonal views: PA and lateral. The dual-view projection data are used together to reconstruct 3D images using the maximum likelihood expectation maximization iterative algorithm. In this study, projection images were simulated or experimentally acquired over 360° using the scanning geometry for cone beam computed tomography (CBCT). While all projections were used to reconstruct CBCT images, selected projections were extracted and used to reconstruct single- and dual-view DTS images for comparison with the CBCT images. For realistic demonstration and comparison, a digital chest phantom derived from clinical CT images was used for the simulation study. An anthropomorphic chest phantom was imaged for the experimental study. The resultant dual-view DTS images were visually compared with the single-view DTS images and CBCT images for the presence of image artifacts and accuracy of CT numbers and anatomy and quantitatively compared with root-mean-square-deviation (RMSD) values computed using the digital chest phantom or the CBCT images as the reference in the simulation and experimental study, respectively. High-contrast wires with vertical, oblique, and horizontal orientations in a PA view plane were also imaged to investigate the spatial resolutions and how the wire signals spread in the PA view and lateral view slice images. Results: Both the digital phantom images (simulated) and the anthropomorphic phantom images (experimentally generated) demonstrated that the dual-view DTS technique resulted in improved spatial resolution in the depth (PA) direction, more accurate representation of the anatomy, and significantly reduced artifacts. The RMSD values corroborate well with visual observations with substantially lower RMSD values measured for the dual-view DTS images as compared to those measured for the single-view DTS images. The imaging experiment with the high-contrast wires shows that while the vertical and oblique wires could be resolved in the lateral view in both single- and dual-view DTS images, the horizontal wire could only be resolved in the dual-view DTS images. This indicates that with single-view DTS, the wire signals spread liberally to off-fulcrum planes and generated wire shadow there. Conclusions: The authors have demonstrated both visually and quantitatively that the dual-view DTS technique can be used to achieve more accurate rendition of the anatomy and to obtain slice images with improved resolution and reduced artifacts as compared to the single-view DTS technique, thus allowing the 3D image data to be viewed in views other than the PA view. These advantages could make the dual-view DTS technique useful in situations where better separation of the objects-of-interest from the off-fulcrum structures or more accurate 3D rendition of the anatomy are required while a regular CT examination is undesirable due to radiation dose considerations.« less

Multi-method automated diagnostics of rotating machines

NASA Astrophysics Data System (ADS)

Kostyukov, A. V.; Boychenko, S. N.; Shchelkanov, A. V.; Burda, E. A.

2017-08-01

The automated machinery diagnostics and monitoring systems utilized within the petrochemical plants are an integral part of the measures taken to ensure safety and, as a consequence, the efficiency of these industrial facilities. Such systems are often limited in their functionality due to the specifics of the diagnostic techniques adopted. As the diagnostic techniques applied in each system are limited, and machinery defects can have different physical nature, it becomes necessary to combine several diagnostics and monitoring systems to control various machinery components. Such an approach is inconvenient, since it requires additional measures to bring the diagnostic results in a single view of the technical condition of production assets. In this case, we mean by a production facility a bonded complex of a process unit, a drive, a power source and lines. A failure of any of these components will cause an outage of the production asset, which is unacceptable. The purpose of the study is to test a combined use of vibration diagnostics and partial discharge techniques within the diagnostic systems of enterprises for automated control of the technical condition of rotating machinery during maintenance and at production facilities. The described solutions allow you to control the condition of mechanical and electrical components of rotating machines. It is shown that the functionality of the diagnostics systems can be expanded with minimal changes in technological chains of repair and operation of rotating machinery. Automation of such systems reduces the influence of the human factor on the quality of repair and diagnostics of the machinery.

B-scan technique for localization and characterization of fatigue cracks around fastener holes in multi-layered structures

NASA Astrophysics Data System (ADS)

Hopkins, Deborah; Datuin, Marvin; Aldrin, John; Warchol, Mark; Warchol, Lyudmila; Forsyth, David

2018-04-01

The work presented here aims to develop and transition angled-beam shear-wave inspection techniques for crack localization at fastener sites in multi-layer aircraft structures. This requires moving beyond detection to achieve reliable crack location and size, thereby providing invaluable information for maintenance actions and service-life management. The technique presented is based on imaging cracks in "True" B-scans (depth view projected in the sheets along the beam path). The crack traces that contribute to localization in the True B-scans depend on small, diffracted signals from the crack edges and tips that are visible in simulations and experimental data acquired with sufficient gain. The most recent work shows that cracks rotated toward and away from the central ultrasonic beam also yield crack traces in True B-scans that allow localization in simulations, even for large obtuse angles where experimental and simulation results show very small or no indications in the C-scans. Similarly, for two sheets joined by sealant, simulations show that cracks in the second sheet can be located in True B-scans for all locations studied: cracks that intersect the front or back wall of the second sheet, as well as relatively small mid-bore cracks. These results are consistent with previous model verification and sensitivity studies that demonstrate crack localization in True B-scans for a single sheet and cracks perpendicular to the ultrasonic beam.

Functions and regulation of the multitasking FANCM family of DNA motor proteins.

PubMed

Xue, Xiaoyu; Sung, Patrick; Zhao, Xiaolan

2015-09-01

Members of the conserved FANCM family of DNA motor proteins play key roles in genome maintenance processes. FANCM supports genome duplication and repair under different circumstances and also functions in the ATR-mediated DNA damage checkpoint. Some of these roles are shared among lower eukaryotic family members. Human FANCM has been linked to Fanconi anemia, a syndrome characterized by cancer predisposition, developmental disorder, and bone marrow failure. Recent studies on human FANCM and its orthologs from other organisms have provided insights into their biological functions, regulation, and collaboration with other genome maintenance factors. This review summarizes the progress made, with the goal of providing an integrated view of the functions and regulation of these enzymes in humans and model organisms and how they advance our understanding of genome maintenance processes. © 2015 Xue et al.; Published by Cold Spring Harbor Laboratory Press.

A genomic perspective on the generation and maintenance of genetic diversity in herbivorous insects

PubMed Central

Gloss, Andrew D.; Groen, Simon C.; Whiteman, Noah K.

2017-01-01

Understanding the processes that generate and maintain genetic variation within populations is a central goal in evolutionary biology. Theory predicts that some of this variation is maintained as a consequence of adapting to variable habitats. Studies in herbivorous insects have played a key role in confirming this prediction. Here, we highlight theoretical and conceptual models for the maintenance of genetic diversity in herbivorous insects, empirical genomic studies testing these models, and pressing questions within the realm of evolutionary and functional genomic studies. To address key gaps, we propose an integrative approach combining population genomic scans for adaptation, genome-wide characterization of targets of selection through experimental manipulations, mapping the genetic architecture of traits influencing fitness, and functional studies. We also stress the importance of studying the maintenance of genetic variation across biological scales—from variation within populations to divergence among populations—to form a comprehensive view of adaptation in herbivorous insects. PMID:28736510

EMMA: The expert system for munition maintenance

NASA Technical Reports Server (NTRS)

Mullins, Barry E.

1988-01-01

Expert Missile Maintenance Aid (EMMA) is a first attempt to enhance maintenance of the tactical munition at the field and depot level by using artificial intelligence (AI) techniques. The ultimate goal of EMMA is to help a novice maintenance technician isolate and diagnose electronic, electromechanical, and mechanical equipment faults to the board/chassis level more quickly and consistently than the best human expert using the best currently available automatic test equipment (ATE). To this end, EMMA augments existing ATE with an expert system that captures the knowledge of design and maintenance experts. The EMMA program is described, including the evaluation of field-level expert system prototypes, the description of several study tasks performed during EMMA, and future plans for a follow-on program. This paper will briefly address several study tasks performed during EMMA. The paper concludes with a discussion of future plans for a follow-on program and other areas of concern.

Three Cases of Hair Loss Analyzed by the Point of View of the Analytical Psychology

PubMed Central

Leite Júnior, Ademir Carvalho; Katzer, Tatiele; Ramos, Denise Gimenez

2017-01-01

Psychotrichology is the science, which covers the psychosomatics applied to hair problems, i.e., body-psyche phenomena involving scalp and hair disorders. The approaches involving psychotricology are varied and may include psychiatric,[1] psychoanalytical,[23] and those involving knowledge related to analytical psychology.[4] An analysis from the analytical psychology point of view, a theory developed by the physician Carl Gustav Jung, favors a symbolic view to the disease, providing it attributions and meanings that go beyond those related to physical body signs and symptoms only. This paper aims to describe and analyze, under the analytical psychology view, three cases the psychic and clinical demonstrations of which relate to symbolic and historic aspects concerning life of patients as possibilities of cause and maintenance of hair problems. The first of them is related to an 8-year-old girl who witnessed a scene of physical aggression by her father against her mother and developed a case of total alopecia. The second case is related to a 43-year-old woman who developed self-inflicted scalp dermatitis due to severe anxiety; and at last, the case of a telogen effluvium in a 23-year-old woman who developed hyperprolactinemia after the death of her mother, having to substitute her in the care about her husband and brothers. Looking at the clinical history and symbolic matters of scalp and hair diseases enabled, in the aforementioned cases, a better understanding of patients' psychoemotional disorders that may be related to the beginning and maintenance of clinical cases presented by them. PMID:29118523

Three Cases of Hair Loss Analyzed by the Point of View of the Analytical Psychology.

PubMed

Leite Júnior, Ademir Carvalho; Katzer, Tatiele; Ramos, Denise Gimenez

2017-01-01

Psychotrichology is the science, which covers the psychosomatics applied to hair problems, i.e., body-psyche phenomena involving scalp and hair disorders. The approaches involving psychotricology are varied and may include psychiatric,[1] psychoanalytical,[23] and those involving knowledge related to analytical psychology.[4] An analysis from the analytical psychology point of view, a theory developed by the physician Carl Gustav Jung, favors a symbolic view to the disease, providing it attributions and meanings that go beyond those related to physical body signs and symptoms only. This paper aims to describe and analyze, under the analytical psychology view, three cases the psychic and clinical demonstrations of which relate to symbolic and historic aspects concerning life of patients as possibilities of cause and maintenance of hair problems. The first of them is related to an 8-year-old girl who witnessed a scene of physical aggression by her father against her mother and developed a case of total alopecia. The second case is related to a 43-year-old woman who developed self-inflicted scalp dermatitis due to severe anxiety; and at last, the case of a telogen effluvium in a 23-year-old woman who developed hyperprolactinemia after the death of her mother, having to substitute her in the care about her husband and brothers. Looking at the clinical history and symbolic matters of scalp and hair diseases enabled, in the aforementioned cases, a better understanding of patients' psychoemotional disorders that may be related to the beginning and maintenance of clinical cases presented by them.

Facilitating children's views of therapy: an analysis of the use of play-based techniques to evaluate clinical practice.

PubMed

Jäger, Jessica

2013-07-01

This article reports on a follow-up study exploring the use of play-based evaluation methods to facilitate children's views of therapy. The development and piloting of these techniques, with 12 children in the author's own practice, was previously reported in this journal. It was argued that play-based evaluation methods reduce the power imbalance inherent in adult researcher/interviewer-child relationships and provide children with meaningful ways to share their views. In this article, follow-up research into play-based evaluations with 20 children and 7 different play therapists is drawn upon to explore in greater depth the strengths and weaknesses of these techniques. The study shows that play-based evaluation techniques are important and flexible methods for facilitating children's views of child therapy. It is argued that those play therapists who incorporate their therapeutic skills effectively, maintain flexibility and sensitively attune to the child during the evaluation session, enable the child to explore their views most fully.

Orbital assembly and maintenance study

NASA Technical Reports Server (NTRS)

Gorman, D.; Grant, C.; Kyrias, G.; Lord, C.; Rombach, J.; Salis, M.; Skidmore, R.; Thomas, R.

1975-01-01

The requirements, conceptual design, tradeoffs, procedures, and techniques for orbital assembly of the support structure of the microwave power transmission system and the radio astronomy telescope are described. Thermal and stress analyses, packaging, alignment, and subsystems requirements are included along with manned vs. automated and transportation tradeoffs. Technical and operational concepts for the manned and automated maintenance of satellites were investigated and further developed results are presented.

Aircraft Scheduled Structural Maintenance Programs: Current Philosophies and Methods in the United States and their Applicability to the Royal Australian Air Force

DTIC Science & Technology

1988-09-01

maintenance programs. They use "a dedicated age exploration technique and actuarial analyses (31:847)" to Justify any changes to programs. RAAF. The...A066593). 8. Coffin, M.D. and C.F. Tiffany. "New Air Force Requirements for Structural Safety, Durability and Life Management," AIAA/ ASME /SAE 16th

Four-chamber view and 'swing technique' (FAST) echo: a novel and simple algorithm to visualize standard fetal echocardiographic planes.

PubMed

Yeo, L; Romero, R; Jodicke, C; Oggè, G; Lee, W; Kusanovic, J P; Vaisbuch, E; Hassan, S

2011-04-01

To describe a novel and simple algorithm (four-chamber view and 'swing technique' (FAST) echo) for visualization of standard diagnostic planes of fetal echocardiography from dataset volumes obtained with spatiotemporal image correlation (STIC) and applying a new display technology (OmniView). We developed an algorithm to image standard fetal echocardiographic planes by drawing four dissecting lines through the longitudinal view of the ductal arch contained in a STIC volume dataset. Three of the lines are locked to provide simultaneous visualization of targeted planes, and the fourth line (unlocked) 'swings' through the ductal arch image (swing technique), providing an infinite number of cardiac planes in sequence. Each line generates the following plane(s): (a) Line 1: three-vessels and trachea view; (b) Line 2: five-chamber view and long-axis view of the aorta (obtained by rotation of the five-chamber view on the y-axis); (c) Line 3: four-chamber view; and (d) 'swing line': three-vessels and trachea view, five-chamber view and/or long-axis view of the aorta, four-chamber view and stomach. The algorithm was then tested in 50 normal hearts in fetuses at 15.3-40 weeks' gestation and visualization rates for cardiac diagnostic planes were calculated. To determine whether the algorithm could identify planes that departed from the normal images, we tested the algorithm in five cases with proven congenital heart defects. In normal cases, the FAST echo algorithm (three locked lines and rotation of the five-chamber view on the y-axis) was able to generate the intended planes (longitudinal view of the ductal arch, pulmonary artery, three-vessels and trachea view, five-chamber view, long-axis view of the aorta, four-chamber view) individually in 100% of cases (except for the three-vessels and trachea view, which was seen in 98% (49/50)) and simultaneously in 98% (49/50). The swing technique was able to generate the three-vessels and trachea view, five-chamber view and/or long-axis view of the aorta, four-chamber view and stomach in 100% of normal cases. In the abnormal cases, the FAST echo algorithm demonstrated the cardiac defects and displayed views that deviated from what was expected from the examination of normal hearts. The swing technique was useful for demonstrating the specific diagnosis due to visualization of an infinite number of cardiac planes in sequence. This novel and simple algorithm can be used to visualize standard fetal echocardiographic planes in normal fetal hearts. The FAST echo algorithm may simplify examination of the fetal heart and could reduce operator dependency. Using this algorithm, inability to obtain expected views or the appearance of abnormal views in the generated planes should raise the index of suspicion for congenital heart disease. Copyright © 2011 ISUOG. Published by John Wiley & Sons, Ltd.

Application of AI techniques to infer vegetation characteristics from directional reflectance(s)

NASA Technical Reports Server (NTRS)

Kimes, D. S.; Smith, J. A.; Harrison, P. A.; Harrison, P. R.

1994-01-01

Traditionally, the remote sensing community has relied totally on spectral knowledge to extract vegetation characteristics. However, there are other knowledge bases (KB's) that can be used to significantly improve the accuracy and robustness of inference techniques. Using AI (artificial intelligence) techniques a KB system (VEG) was developed that integrates input spectral measurements with diverse KB's. These KB's consist of data sets of directional reflectance measurements, knowledge from literature, and knowledge from experts which are combined into an intelligent and efficient system for making vegetation inferences. VEG accepts spectral data of an unknown target as input, determines the best techniques for inferring the desired vegetation characteristic(s), applies the techniques to the target data, and provides a rigorous estimate of the accuracy of the inference. VEG was developed to: infer spectral hemispherical reflectance from any combination of nadir and/or off-nadir view angles; infer percent ground cover from any combination of nadir and/or off-nadir view angles; infer unknown view angle(s) from known view angle(s) (known as view angle extension); and discriminate between user defined vegetation classes using spectral and directional reflectance relationships developed from an automated learning algorithm. The errors for these techniques were generally very good ranging between 2 to 15% (proportional root mean square). The system is designed to aid scientists in developing, testing, and applying new inference techniques using directional reflectance data.

Folate deficiency in north Indian children undergoing maintenance chemotherapy for acute lymphoblastic leukemia-Implications and outcome.

PubMed

Roy Moulik, Nirmalya; Kumar, Archana; Agrawal, Suraksha; Mahdi, Abbas Ali

2018-01-01

Treatment-related toxicity and mortality are not uncommon during maintenance chemotherapy for childhood acute lymphoblastic leukemia (ALL), especially in the low- and middle-income countries (LMIC). Undernutrition and micronutrient deficiencies are commonly seen in children from LMICs undergoing treatment for ALL. The present study examines the prevalence and clinical implications of folate deficiency in north Indian children with ALL during the maintenance phase of treatment in view of prolonged antifolate treatment and high population prevalence of folate deficiency. Pre-cycle folate levels/deficiency as well as weight for age z-score and serum albumin level were determined and correlated with complications of treatment and mortality encountered during the maintenance phase of treatment. Twenty-nine of 52 children enrolled in the study had folate deficiency at some point during maintenance chemotherapy. Neutropenia (18 of 29 vs. 4 of 23; P = 0.002), thrombocytopenia (17 of 29 vs. 4 of 23; P = 0.005), febrile neutropenia (17 of 29 vs. 4 of 23; P = 0.005), and need for chemotherapy dose reduction (20 of 29 vs. 7 of 21; P = 0.01) were more common in folate-deficient children. Maintenance deaths were higher (8 of 29 vs. 1 of 23; P = 0.03) and survival lower (P = 0.02) in deficient children. In multivariate analysis, hypoalbuminemia (P = 0.02) and folate deficiency (P = 0.01) were associated with febrile neutropenia, and folate deficiency with maintenance deaths (P = 0.03). Folate deficiency was associated with treatment-related complications and adverse outcome in our patients. The risks and benefits of folate supplementation in deficient children during maintenance chemotherapy need to be explored with properly designed randomized studies in similar settings. © 2017 Wiley Periodicals, Inc.

Crew interface specification development study for in-flight maintenance and stowage functions

NASA Technical Reports Server (NTRS)

Carl, J. G.

1971-01-01

The need and potential solutions for an orderly systems engineering approach to the definition, management and documentation requirements for in-flight maintenance, assembly, servicing, and stowage process activities of the flight crews of future spacecraft were investigated. These processes were analyzed and described using a new technique (mass/function flow diagramming), developed during the study, to give visibility to crew functions and supporting requirements, including data products. This technique is usable by NASA for specification baselines and can assist the designer in identifying both upper and lower level requirements associated with these processes. These diagrams provide increased visibility into the relationships between functions and related equipments being utilized and managed and can serve as a common communicating vehicle between the designer, program management, and the operational planner. The information and data product requirements to support the above processes were identified along with optimum formats and contents of these products. The resulting data product concepts are presented to support these in-flight maintenance and stowage processes.

Lineage Selection and the Maintenance of Sex.

PubMed

de Vienne, Damien M; Giraud, Tatiana; Gouyon, Pierre-Henri

2013-01-01

Sex predominates in eukaryotes, despite its short-term disadvantage when compared to asexuality. Myriad models have suggested that short-term advantages of sex may be sufficient to counterbalance its twofold costs. However, despite decades of experimental work seeking such evidence, no evolutionary mechanism has yet achieved broad recognition as explanation for the maintenance of sex. We explore here, through lineage-selection models, the conditions favouring the maintenance of sex. In the first model, we allowed the rate of transition to asexuality to evolve, to determine whether lineage selection favoured species with the strongest constraints preventing the loss of sex. In the second model, we simulated more explicitly the mechanisms underlying the higher extinction rates of asexual lineages than of their sexual counterparts. We linked extinction rates to the ecological and/or genetic features of lineages, thereby providing a formalisation of the only figure included in Darwin's "The origin of species". Our results reinforce the view that the long-term advantages of sex and lineage selection may provide the most satisfactory explanations for the maintenance of sex in eukaryotes, which is still poorly recognized, and provide figures and a simulation website for training and educational purposes. Short-term benefits may play a role, but it is also essential to take into account the selection of lineages for a thorough understanding of the maintenance of sex.

The impact of storage on processing: how is information maintained in working memory?

PubMed

Vergauwe, Evie; Camos, Valérie; Barrouillet, Pierre

2014-07-01

Working memory is typically defined as a system devoted to the simultaneous maintenance and processing of information. However, the interplay between these 2 functions is still a matter of debate in the literature, with views ranging from complete independence to complete dependence. The time-based resource-sharing model assumes that a central bottleneck constrains the 2 functions to alternate in such a way that maintenance activities postpone concurrent processing, with each additional piece of information to be maintained resulting in an additional postponement. Using different kinds of memoranda, we examined in a series of 7 experiments the effect of increasing memory load on different processing tasks. The results reveal that, insofar as attention is needed for maintenance, processing times linearly increase at a rate of about 50 ms per verbal or visuospatial memory item, suggesting a very fast refresh rate in working memory. Our results also show an asymmetry between verbal and spatial information, in that spatial information can solely rely on attention for its maintenance while verbal information can also rely on a domain-specific maintenance mechanism independent from attention. The implications for the functioning of working memory are discussed, with a specific focus on how information is maintained in working memory. PsycINFO Database Record (c) 2014 APA, all rights reserved.

A stroboscopic technique for using CCD cameras in flow visualization systems for continuous viewing and stop action photography

NASA Technical Reports Server (NTRS)

Franke, John M.; Rhodes, David B.; Jones, Stephen B.; Dismond, Harriet R.

1992-01-01

A technique for synchronizing a pulse light source to charge coupled device cameras is presented. The technique permits the use of pulse light sources for continuous as well as stop action flow visualization. The technique has eliminated the need to provide separate lighting systems at facilities requiring continuous and stop action viewing or photography.

Use of joint two-view information for computerized lesion detection on mammograms: improvement of microcalcification detection accuracy

NASA Astrophysics Data System (ADS)

Sahiner, Berkman; Gurcan, Metin N.; Chan, Heang-Ping; Hadjiiski, Lubomir M.; Petrick, Nicholas; Helvie, Mark A.

2002-05-01

We are developing new techniques to improve the accuracy of computerized microcalcification detection by using the joint two-view information on craniocaudal (CC) and mediolateral-oblique (MLO) views. After cluster candidates were detected using a single-view detection technique, candidates on CC and MLO views were paired using their radial distances from the nipple. Object pairs were classified with a joint two-view classifier that used the similarity of objects in a pair. Each cluster candidate was also classified as a true microcalcification cluster or a false-positive (FP) using its single-view features. The outputs of these two classifiers were fused. A data set of 38 pairs of mammograms from our database was used to train the new detection technique. The independent test set consisted of 77 pairs of mammograms from the University of South Florida public database. At a per-film sensitivity of 70%, the FP rates were 0.17 and 0.27 with the fusion and single-view detection methods, respectively. Our results indicate that correspondence of cluster candidates on two different views provides valuable additional information for distinguishing false from true microcalcification clusters.

Simulation studies of wide and medium field of view earth radiation data analysis

NASA Technical Reports Server (NTRS)

Green, R. N.

1978-01-01

A parameter estimation technique is presented to estimate the radiative flux distribution over the earth from radiometer measurements at satellite altitude. The technique analyzes measurements from a wide field of view (WFOV), horizon to horizon, nadir pointing sensor with a mathematical technique to derive the radiative flux estimates at the top of the atmosphere for resolution elements smaller than the sensor field of view. A computer simulation of the data analysis technique is presented for both earth-emitted and reflected radiation. Zonal resolutions are considered as well as the global integration of plane flux. An estimate of the equator-to-pole gradient is obtained from the zonal estimates. Sensitivity studies of the derived flux distribution to directional model errors are also presented. In addition to the WFOV results, medium field of view results are presented.

Albanian Parents and the Greek Educational Context: Who Is Willing to Fight for the Home Language?

ERIC Educational Resources Information Center

Gkaintartzi, Anastasia; Chatzidaki, Aspasia; Tsokalidou, Roula

2014-01-01

This article examines views of Albanian immigrant parents regarding home-language maintenance in Greece. It aims to reveal language ideologies in relation to broader ideologies about schooling and education. Following a qualitative interpretative approach, we conducted semi-structured individual and group interviews with 19 parents of bilingual…

78 FR 12648 - Airworthiness Directives; Robinson Helicopter Company

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-25

..., data, or views. We also invite comments relating to the economic, environmental, energy, or federalism... maintenance people to do their jobs and not add to this burden of it looks good on paper world.'' We do not... variance in design of the blades is contributing to the situation. The commenter questioned whether other...

77 FR 40266 - Drawbridge Operation Regulations; Pequonnock River, Bridgeport, CT, Maintenance

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-09

... requests to open during the past several years except for bridge testing and repairs. Under this temporary... questions on this rule, call or email Ms. Judy Leung-Yee, Project Officer, First Coast Guard District, telephone (212) 668-7165, email [email protected] . If you have questions on viewing the docket...

Approaches to Ecologically Based Forest Management on Private Lands

Treesearch

John Kotar

1997-01-01

NA-NR-604, The management philosophy advocated by many public agencies today has become known as "ecosystem management." Under this philosophy, maintenance of ecosystem structure and functions becomes the primary goal, while production of commodities and services is viewed as a useful byproduct. However, any effort to assure sustainability and health of...

Approaches to Ecologically Based Forest Management on Private Lands

Treesearch

John Kotar

1997-01-01

The management philosophy advocated by many public agencies today has become known as "ecosystem management." Under this philosophy, maintenance of ecosystem structure and functions becomes the primary goal, while production of commodities and services is viewed as a useful byproduct. However, any effort to assure sustainability and health of American forests...

Self-Blame in Rape Victims: A Control-Maintenance Strategy.

ERIC Educational Resources Information Center

Janoff-Bulman, Ronnie

Two types of self-blame were investigated: characterological self-blame, corresponding to the popular negative view of self-blame; and behavioral self-blame, representing a positive attempt to reestablish a belief in control. Results of a questionnaire completed by rape crisis centers located across the country attest to the pervasiveness of…

Nuclear Taskforce Summation.

ERIC Educational Resources Information Center

1979

At the end of 1978, there were approximately 230 nuclear-fueled electric generating plants around the world; 72 of these were in the United States. Each plant requires an operations-and-maintenance workforce of 92 people, and attrition occurs at a rate of 8% per year. Requirements for a nuclear taskforce and job training, in view of current…

77 FR 30352 - Forest River, Inc., Denial of Petition for Decision of Inconsequential Noncompliance

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-22

..., contrary to Forest River's view, the steel panels that cover the wheel/tire assemblies of the subject..., automotive mechanics earn, on average, only $17.21 per hour.\\2\\ In addition, the million dollar figure....gov/ooh/Installation-Maintenance-and-Repair/Automotive-service-technicians-and-mechanics.htm (last...

High-Maintenance Parent or Parent Partner? Working with a Parent's Concern.

ERIC Educational Resources Information Center

Gonzalez-Mena, Janet; Stonehouse, Anne

2003-01-01

Discusses issues for child care professionals working in partnership with parents on a difficult issue. Considers establishing mutual trust and respect for each other's views, keeping in mind the needs of other students, and maintaining confidence in the program's goals. Includes example involving a parent's complaint about the admission of a…

Strategy for Aircraft Maintenance in the Pacific

DTIC Science & Technology

1988-04-01

attacks on Japanese soil were very unlikely, the view that Kadena was a "safe haven" was not widely disputed. The preponder- ance of Soviet force in East...Frank S. "Thunderbolts, Eggshells , and Tethers." Air Force Journal of Logistics, Summer 1986, 2-5. 24. Handy, Captain Gurnie H., Jr. and Captain Ronald

A guide to onboard checkout. Volume 6: Structures/mechanics

NASA Technical Reports Server (NTRS)

1971-01-01

The structures and mechanical subsystem of a space station are considered. The subsystem includes basic structure (pressurization, equipment support, meteoroid protection, radiators, insulation, and docking interfaces), the docking mechanisms, spacecraft access (hatches, airlocks, and view ports), and antenna deployment mechanisms. Checkout is discussed in terms of reliability, failure analysis, and maintenance.

"Forked Tongue: The Politics of Bilingual Education," by Rosalie Pedalino Porter. Book Review.

ERIC Educational Resources Information Center

Amabisca, Anastasia Aimee

1994-01-01

Based on personal experience rather than empirical evidence, "Forked Tongue" presents a biased view that could damage the future of bilingual education in the United States. The book considers bilingual education a threat because it prolongs the learning of English and promotes the maintenance of other "un-American" languages…

Navy Force Structure and Shipbuilding Plans: Background and Issues for Congress

DTIC Science & Technology

2017-02-02

25 Cruiser Modernization ...for the 47 additional ships 3 ); and to perform periodic maintenance and modernization work on the ships.  If defense spending in coming years is...viewed as a Navy response to, among other things, China’s continuing naval modernization effort; 4 resurgent Russian naval activity, particularly

Task relevance modulates the cortical representation of feature conjunctions in the target template.

PubMed

Reeder, Reshanne R; Hanke, Michael; Pollmann, Stefan

2017-07-03

Little is known about the cortical regions involved in representing task-related content in preparation for visual task performance. Here we used representational similarity analysis (RSA) to investigate the BOLD response pattern similarity between task relevant and task irrelevant feature dimensions during conjunction viewing and target template maintenance prior to visual search. Subjects were cued to search for a spatial frequency (SF) or orientation of a Gabor grating and we measured BOLD signal during cue and delay periods before the onset of a search display. RSA of delay period activity revealed that widespread regions in frontal, posterior parietal, and occipitotemporal cortices showed general representational differences between task relevant and task irrelevant dimensions (e.g., orientation vs. SF). In contrast, RSA of cue period activity revealed sensory-related representational differences between cue images (regardless of task) at the occipital pole and additionally in the frontal pole. Our data show that task and sensory information are represented differently during viewing and during target template maintenance, and that task relevance modulates the representation of visual information across the cortex.

Remote Sensing Applications with High Reliability in Changjiang Water Resource Management

NASA Astrophysics Data System (ADS)

Ma, L.; Gao, S.; Yang, A.

2018-04-01

Remote sensing technology has been widely used in many fields. But most of the applications cannot get the information with high reliability and high accuracy in large scale, especially for the applications using automatic interpretation methods. We have designed an application-oriented technology system (PIR) composed of a series of accurate interpretation techniques,which can get over 85 % correctness in Water Resource Management from the view of photogrammetry and expert knowledge. The techniques compose of the spatial positioning techniques from the view of photogrammetry, the feature interpretation techniques from the view of expert knowledge, and the rationality analysis techniques from the view of data mining. Each interpreted polygon is accurate enough to be applied to the accuracy sensitive projects, such as the Three Gorge Project and the South - to - North Water Diversion Project. In this paper, we present several remote sensing applications with high reliability in Changjiang Water Resource Management,including water pollution investigation, illegal construction inspection, and water conservation monitoring, etc.

SU-C-206-07: A Practical Sparse View Ultra-Low Dose CT Acquisition Scheme for PET Attenuation Correction in the Extended Scan Field-Of-View

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miao, J; Fan, J; Gopinatha Pillai, A

Purpose: To further reduce CT dose, a practical sparse-view acquisition scheme is proposed to provide the same attenuation estimation as higher dose for PET imaging in the extended scan field-of-view. Methods: CT scans are often used for PET attenuation correction and can be acquired at very low CT radiation dose. Low dose techniques often employ low tube voltage/current accompanied with a smooth filter before backprojection to reduce CT image noise. These techniques can introduce bias in the conversion from HU to attenuation values, especially in the extended CT scan field-of-view (FOV). In this work, we propose an ultra-low dose CTmore » technique for PET attenuation correction based on sparse-view acquisition. That is, instead of an acquisition of full amount of views, only a fraction of views are acquired. We tested this technique on a 64-slice GE CT scanner using multiple phantoms. CT scan FOV truncation completion was performed based on the published water-cylinder extrapolation algorithm. A number of continuous views per rotation: 984 (full), 246, 123, 82 and 62 have been tested, corresponding to a CT dose reduction of none, 4x, 8x, 12x and 16x. We also simulated sparse-view acquisition by skipping views from the fully-acquired view data. Results: FBP reconstruction with Q. AC filter on reduced views in the full extended scan field-of-view possesses similar image quality to the reconstruction on acquired full view data. The results showed a further potential for dose reduction compared to the full acquisition, without sacrificing any significant attenuation support to the PET. Conclusion: With the proposed sparse-view method, one can potential achieve at least 2x more CT dose reduction compared to the current Ultra-Low Dose (ULD) PET/CT protocol. A pre-scan based dose modulation scheme can be combined with the above sparse-view approaches, which can even further reduce the CT scan dose during a PET/CT exam.« less

40 CFR 85.2120 - Maintenance and submittal of records.

Code of Federal Regulations, 2010 CFR

2010-07-01

... testing program, including all production part sampling techniques used to verify compliance of the... subsequent analyses of that data; (7) A description of all the methodology, analysis, testing and/or sampling techniques used to ascertain the emission critical parameter specifications of the originial equipment part...

Effects of load and maintenance duration on the time course of information encoding and retrieval in working memory: from perceptual analysis to post-categorization processes.

PubMed

Pinal, Diego; Zurrón, Montserrat; Díaz, Fernando

2014-01-01

information encoding, maintenance, and retrieval; these are supported by brain activity in a network of frontal, parietal and temporal regions. Manipulation of WM load and duration of the maintenance period can modulate this activity. Although such modulations have been widely studied using the event-related potentials (ERP) technique, a precise description of the time course of brain activity during encoding and retrieval is still required. Here, we used this technique and principal component analysis to assess the time course of brain activity during encoding and retrieval in a delayed match to sample task. We also investigated the effects of memory load and duration of the maintenance period on ERP activity. Brain activity was similar during information encoding and retrieval and comprised six temporal factors, which closely matched the latency and scalp distribution of some ERP components: P1, N1, P2, N2, P300, and a slow wave. Changes in memory load modulated task performance and yielded variations in frontal lobe activation. Moreover, the P300 amplitude was smaller in the high than in the low load condition during encoding and retrieval. Conversely, the slow wave amplitude was higher in the high than in the low load condition during encoding, and the same was true for the N2 amplitude during retrieval. Thus, during encoding, memory load appears to modulate the processing resources for context updating and post-categorization processes, and during retrieval it modulates resources for stimulus classification and context updating. Besides, despite the lack of differences in task performance related to duration of the maintenance period, larger N2 amplitude and stronger activation of the left temporal lobe after long than after short maintenance periods were found during information retrieval. Thus, results regarding the duration of maintenance period were complex, and future work is required to test the time-based decay theory predictions.

20. Station Unwatering Pumps and Sump Pump, view to the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. Station Unwatering Pumps and Sump Pump, view to the north. The station unwatering pumps are the two large units in the center and right foreground of photograph and are marked with the numbers 1 and 2. The sump pump is the smaller unit in left foreground of photograph. These pumps are used for unwatering the draft chests for maintenance. Note the draft tube unwatering valve visible in background between the two unwatering pumps. - Washington Water Power Clark Fork River Noxon Rapids Hydroelectric Development, Powerhouse, South bank of Clark Fork River at Noxon Rapids, Noxon, Sanders County, MT

102. Interior view of utilidor passageway link between building nos. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

102. Interior view of utilidor passageway link between building nos. 101 and 102 showing waveguides on left and cable tray system on right sides. Note fire suppression water supply piping (upper center). Small maintenance 3-wheel vehicle at center (Note: similar vehicles still in use in 2001.) Official photograph BMEWS Project by Hansen, Photographic Services, Riverton, NJ, BMEWS, clear as negative no. A-101123. - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK

22. VIEW OF WEST BOILER ROOM LOOKING SOUTH. THIS STRUCTURE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. VIEW OF WEST BOILER ROOM LOOKING SOUTH. THIS STRUCTURE WAS ADDED IN THE EXPANSION OF 1911-1912 AND CONTAINED FOURTEEN BOILERS WHICH WERE REMOVED IN 1938. IT SERVED AS A MAINTENANCE AND STORAGE FACILITY UNTIL THE PLANT CLOSED. NETTING ON THE LEFT WAS INSTALLED IN 1988 AFTER THE PLANT CLOSED AND ORIGINALLY STRETCHED ACROSS THE AISLE AS A SAFETY MEASURE. IT WAS INTENDED TO CATCH SHARDS OF ROOF MATERIAL WHICH SPALLED OFF DURING WINTER FREEZE/THAW CYCLES. - New York, New Haven & Hartford Railroad, Cos Cob Power Plant, Sound Shore Drive, Greenwich, Fairfield County, CT

Exploring service delivery in occupational therapy: The use of convergent interviewing.

PubMed

van Biljon, Hester; du Toit, Sanetta H J; Masango, July; Casteleijn, Daleen

2017-01-01

Occupational therapy clinicians working in South Africa's public healthcare had views on what patients thought about their vocational rehabilitation services that were based on anecdotal evidence. However evidence-based practice requires more than that. Reliable information is important in patient-centred practice and in the assessment of service quality. Clinical occupational therapists used the convergent interviewing technique to explore patients' views of the vocational rehabilitation services on offer in public hospitals. An Action Learning Action Research (ALAR) approach was used to explore the vocational rehabilitation services occupational therapy clinicians provided over a two week period in three settings. The majority (96%) of patients interviewed were not aware that occupational therapists offered vocational rehabilitation services. The convergent interview technique allowed continued unrestricted discussion of their vocational rehabilitation concerns and provided evidence that patients had significant concerns about work. Critical reflection on the interview experience and technique indicated that therapists were in favour of using convergent interviewing to obtain their patients views about the services offered. Therapists found the convergent interview technique easy to apply in clinical practice. Establishing patients' views of a clinical service have multiple values. However it is meaningless unless clinicians use the knowledge to improve service delivery to the patients who provided the views. Convergent interviewing was a valuable technique for occupational therapy clinicians to incorporate patients' views of their services into service development.

A Research Agenda for Service-Oriented Architecture (SOA): Maintenance and Evolution of Service-Oriented Systems

DTIC Science & Technology

2010-03-01

service consumers, and infrastructure. Techniques from any iterative and incremental software development methodology followed by the organiza- tion... Service -Oriented Architecture Environment (CMU/SEI-2008-TN-008). Software Engineering Institute, Carnegie Mellon University, 2008. http://www.sei.cmu.edu...Integrating Legacy Software into a Service Oriented Architecture.” Proceedings of the 10th European Conference on Software Maintenance (CSMR 2006). Bari

Maintaining space in localized ridge augmentation using guided bone regeneration with tenting screw technology.

PubMed

Chasioti, Evdokia; Chiang, Tat Fai; Drew, Howard J

2013-01-01

Prosthetic guided implant surgery requires adequate ridge dimensions for proper implant placement. Various surgical procedures can be used to augment deficient alveolar ridges. Studies have examined new bone formation on deficient ridges, utilizing numerous surgical techniques and biomaterials. The goal is to develop time efficient techniques, which have low morbidity. A crucial factor for successful bone grafting procedures is space maintenance. The article discusses space maintenance tenting screws, used in conjunction with bone allografts and resorbable barrier membranes, to ensure uneventful guided bone regeneration (GBR) enabling optimal implant positioning. The technique utilized has been described in the literature to treat severely resorbed alveolar ridges and additionally can be considered in restoring the vertical and horizontal component of deficient extraction sites. Three cases are presented to illustrate the utilization and effectiveness of tenting screw technology in the treatment of atrophic extraction sockets and for deficient ridges.

A Fuzzy analytical hierarchy process approach in irrigation networks maintenance

NASA Astrophysics Data System (ADS)

Riza Permana, Angga; Rintis Hadiani, Rr.; Syafi'i

2017-11-01

Ponorogo Regency has 440 Irrigation Area with a total area of 17,950 Ha. Due to the limited budget and lack of maintenance cause decreased function on the irrigation. The aim of this study is to make an appropriate system to determine the indices weighted of the rank prioritization criteria for irrigation network maintenance using a fuzzy-based methodology. The criteria that are used such as the physical condition of irrigation networks, area of service, estimated maintenance cost, and efficiency of irrigation water distribution. 26 experts in the field of water resources in the Dinas Pekerjaan Umum were asked to fill out the questionnaire, and the result will be used as a benchmark to determine the rank of irrigation network maintenance priority. The results demonstrate that the physical condition of irrigation networks criterion (W1) = 0,279 has the greatest impact on the assessment process. The area of service (W2) = 0,270, efficiency of irrigation water distribution (W4) = 0,249, and estimated maintenance cost (W3) = 0,202 criteria rank next in effectiveness, respectively. The proposed methodology deals with uncertainty and vague data using triangular fuzzy numbers, and, moreover, it provides a comprehensive decision-making technique to assess maintenance priority on irrigation network.

Hippocrates' counselling with regard to physical exercise, gymnastics, dietetics and health.

PubMed

Kritikos, A; Bekiari, A; Nikitaras, N; Famissis, K; Sakellariou, K

2009-09-01

The aim of this study is the investigation of Hippocrates' consultative theory with regard to man's physical exercise, gymnastics, diet and health, on the basis of his work "Regimen" and his other works. The aforementioned issues are thematised in the works in question. By means of this thematisation, a medical counselling is formed, according to which exercise, gymnastics and diet aim at the maintenance and restoration of man's health; dietetics, maintenance of well-being, recovery and amelioration of man's health are involved in this thematisation. Hippocrates' views on the aforementioned issues constitute a basis for the discussion and pedagogical exploitation of them in contemporary education and, particularly, in sports education and physical exercise.

The Coming Paradigm-Shift in Maintenance: From Metals to Composites

NASA Technical Reports Server (NTRS)

Hobbs, Alan; Brasil, Connie; Kanki, Barbara

2009-01-01

The purpose of this study is to examine the current maintenance practices of airline operators in the detection and repair of damage to composite structures, with the aim of learning lessons that will be applicable to the maintenance of future advanced composite airplanes. A process map was created to capture the events and activities that occur from the moment a damage event occurs, through damage detection, assessment and repair. The study is identifying areas where operational risks may negatively impact the process, where personnel are required to make judgments in the absence of procedural guidance, and areas where future tools or techniques may be of assistance.

A simple technique for maintaining Stimulium adults, including onchocerciasis vectors, under artificial conditions.

PubMed

Raybould, J N; Mhiddin, H K

1974-01-01

The maintenance of Simulium adults in the laboratory is necessary for many experimental investigations and is a prerequisite to laboratory colonization. A simple technique for this purpose is described in which each fly is kept separately in a hole bored in a block of expanded polystyrene.

Respondent Techniques for Reduction of Emotions Limiting School Adjustment: A Quantitative Review and Methodological Critique.

ERIC Educational Resources Information Center

Misra, Anjali; Schloss, Patrick J.

1989-01-01

The critical analysis of 23 studies using respondent techniques for the reduction of excessive emotional reactions in school children focuses on research design, dependent variables, independent variables, component analysis, and demonstrations of generalization and maintenance. Results indicate widespread methodological flaws that limit the…

The Impact of Storage on Processing: How Is Information Maintained in Working Memory?

ERIC Educational Resources Information Center

Vergauwe, Evie; Camos, Valérie; Barrouillet, Pierre

2014-01-01

Working memory is typically defined as a system devoted to the simultaneous maintenance and processing of information. However, the interplay between these 2 functions is still a matter of debate in the literature, with views ranging from complete independence to complete dependence. The time-based resource-sharing model assumes that a central…

The Relationship between Children's Use of Television and Stereotypes about Occupations and Personality Attributes.

ERIC Educational Resources Information Center

Caplan, Jennifer

A questionnaire was administered to 94 fifth grade students to measure their use of television and the relationship of this use to their development and maintenance of stereotypes about occupations and personality attributes. It was hypothesized that the more television children viewed, the more likely they would be to develop stereotyped…

College of the Sequoias Faculty Attitudes Toward Office Hours and Facilities.

ERIC Educational Resources Information Center

McCormick, Anne

The opinions of the faculty at the College of the Sequoias, California, regarding their office facilities and scheduled office hours were surveyed. Ninety-nine faculty members completed a 10-item questionnaire, which is enclosed. It was found that the maintenance of faculty office hours and being available for students was viewed as an important…

Sex and the single squirrel: a genetic view of forest management in the Pacific Northwest.

Treesearch

Sally Duncan

2003-01-01

Forest management throughout the world is producing simplified forests. There is growing concern that these forests maintain neither complete vertebrate communities nor conditions favorable to maintenance of genetic diversity of those vertebrate populations that do find habitat in simply structured stands. Genetics is increasingly being used as a basis for management...

Soil organic matter as sole indicator of soil degradation

Treesearch

S.E. Obalum; G.U. Chibuike; S. Peth; Ying Ouyang

2017-01-01

Soil organic matter (SOM) is known to play vital roles in the maintenance and improvement of many soil properties and processes. These roles, which largely influence soil functions, are a pool of specific contributions of different components of SOM. The soil functions, in turn, normally define the level of soil degradation, viewed as quantifiable temporal changes in a...

APA (American Psychological Association) Task Force on Privacy and Confidentiality. Final Report.

ERIC Educational Resources Information Center

American Psychological Association, Washington, DC.

This Task Force on Privacy and Confidentiality is intended to call attention to the central role of the right to privacy in the maintenance and enrichment of a free society. The psychological implications of the changing views of privacy as reflected in political, social, and technological developments are discussed, and recommendations relating…

77 FR 34846 - Inspection, Repair, and Maintenance; Driver-Vehicle Inspection Report for Intermodal Equipment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-12

... the IME. This responds to a joint petition for rulemaking from the Ocean Carrier Equipment Management... Management Facility, Room W12-140, DOT Building, 1200 New Jersey Avenue SE., Washington, DC. You may view the... Transportation's (DOT) Privacy Act system of records notice for the DOT Federal Docket Management System (FDMS...

Uneven-aged silviculture of longleaf pine

Treesearch

James M. Guldin

2006-01-01

The use of uneven-aged silviculture has increased markedly in the past 20 years. This is especially true in the southern United States, where the use of clearcutting and planting is often viewed as a practice whose emphasis on fiber production results in unacceptable consequences for other values, such as those that benefit from maintenance of continuous forest cover...

High-precision relative position and attitude measurement for on-orbit maintenance of spacecraft

NASA Astrophysics Data System (ADS)

Zhu, Bing; Chen, Feng; Li, Dongdong; Wang, Ying

2018-02-01

In order to realize long-term on-orbit running of satellites, space stations, etc spacecrafts, in addition to the long life design of devices, The life of the spacecraft can also be extended by the on-orbit servicing and maintenance. Therefore, it is necessary to keep precise and detailed maintenance of key components. In this paper, a high-precision relative position and attitude measurement method used in the maintenance of key components is given. This method mainly considers the design of the passive cooperative marker, light-emitting device and high resolution camera in the presence of spatial stray light and noise. By using a series of algorithms, such as background elimination, feature extraction, position and attitude calculation, and so on, the high precision relative pose parameters as the input to the control system between key operation parts and maintenance equipment are obtained. The simulation results show that the algorithm is accurate and effective, satisfying the requirements of the precision operation technique.

Maintenance-free operation of WDM quantum key distribution system through a field fiber over 30 days

NASA Astrophysics Data System (ADS)

Yoshino, Ken-ichiro; Ochi, Takao; Fujiwara, Mikio; Sasaki, Masahide; Tajima, Akio

2013-12-01

Maintenance-free wavelength-division-multiplexing quantum key distribution for 30 days was achieved through a 22-km field fiber. Using polarization-independent interferometers and stabilization techniques, we attained a quantum bit error rate as low as 1.70% and a key rate as high as 229.8 kbps, making the record of total secure key of 595.6 Gbits accumulated over an uninterrupted operation period.

[SciELO Public Health: the performance of Cadernos de Saúde Pública and Revista de Saúde Pública].

PubMed

Barata, Rita Barradas

2007-12-01

The aim of this paper was to analyze two Brazilian scientific journals included in the SciELO Library of Public Health, using a group of bibliometric indicators and scrutinizing the articles most viewed. Cadernos de Saúde Pública was accessed 3,743.59 times per month, with an average of 30.31 citations per article. The 50 articles most viewed (6.72 to 524.5 views) were mostly published in Portuguese (92%). 42% were theoretical essays, 20% surveys, and 16% descriptive studies. 42% used argumentative techniques, 34% quantitative techniques, 18% qualitative techniques, and 6% mathematical modeling. The most common themes were: health and work (50%), epidemiology (22%), and environmental health (8%). Revista de Saúde Pública was accessed 1,590.97 times per month, with an average of 26.27 citations per article. The 50 articles most viewed (7.33 and 56.50 views) were all published in Portuguese: 46% were surveys, 14% databases analysis, and 12% systematic reviews. Quantitative techniques were adopted in 66% of such articles, while mathematical modeling was the same as observed in Cadernos de Saúde Pública, as were qualitative techniques. The most common themes were health services organization (22%), nutrition (22%), health and work (18%), epidemiology (12%), and environmental health (12%).

Operations and maintenance in the glass container industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barbieri, D.; Jacobson, D.

1999-07-01

Compressed air is a significant electrical end-use at most manufacturing facilities, and few industries utilize compressed air to the extent of the glass container industry. Unfortunately, compressed air is often a significant source of wasted energy because many customers view it as a low-maintenance system. In the case of the glass container industry, compressed air is a mission-critical system used for driving production machinery, blowing glass, cooling plungers and product, and packaging. Leakage totaling 10% of total compressed air capacity is not uncommon, and leakage rates upwards of 40% have been observed. Even though energy savings from repairing compressed airmore » leaks can be substantial, regular maintenance procedures are often not in place for compressed air systems. In order to achieve future savings in the compressed air end-use, O and M programs must make a special effort to educate customers on the significant energy impacts of regular compressed air system maintenance. This paper will focus on the glass industry, its reliability on compressed air, and the unique savings potential in the glass container industry. Through a technical review of the glass production process, this paper will identify compressed air as a highly significant electrical consumer in these facilities and present ideas on how to produce and deliver compressed air in a more efficient manner. It will also examine a glass container manufacturer with extremely high savings potential in compressed air systems, but little initiative to establish and perform compressed air maintenance due to an if it works, don't mess with it maintenance philosophy. Finally, this paper will address the economic benefit of compressed air maintenance in this and other manufacturing industries.« less

Professionals' views of fetal-monitoring support the development of devices to provide objective longer-term assessment of fetal wellbeing.

PubMed

Brown, Rebecca; Johnstone, Edward D; Heazell, Alexander E P

2016-01-01

Continuous longer-term fetal monitoring has been proposed to address limitations of current technologies in the detection of fetal compromise. We aimed to assess professionals' views regarding current fetal-monitoring techniques and proposed longer-term continuous fetal monitoring. A questionnaire was designed and validated to assess obstetricians' and midwives' use of current fetal-monitoring techniques and their views towards continuous monitoring. 125 of 173 received responses (72% obstetricians, 28% midwives) were analysed. Professionals had the strongest views about supporting evidence for the most commonly employed fetal-monitoring techniques (maternal awareness of fetal movements, ultrasound assessment of fetal growth and umbilical artery Doppler). 45.1% of professionals agreed that a continuous monitoring device would be beneficial (versus 28.7% who disagreed); this perceived benefit was not influenced by professionals' views regarding current techniques or professional background. Professionals have limited experience of continuous fetal monitoring, but most respondents believed that it would increase maternal anxiety (64.3%) and would have concerns with its use in clinical practice (81.7%). Continuous fetal monitoring would be acceptable to the majority of professionals. However, development of these technologies must be accompanied by extended examination of professionals' and women's views to determine barriers to its introduction.

Duck Valley Reservoirs Fish Stocking and Operation and Maintenance, 2006-2007 Annual Progress Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sellman, Jake; Dykstra, Tim

The Duck Valley Reservoirs Fish Stocking and Operations and Maintenance (DV Fisheries) project is an ongoing resident fish program that serves to partially mitigate the loss of anadromous fish that resulted from downstream construction of the hydropower system. The project's goals are to enhance subsistence fishing and educational opportunities for Tribal members of the Shoshone-Paiute Tribes and provide resident fishing opportunities for non-Tribal members. In addition to stocking rainbow trout (Oncorhynchus mykiss) in Mountain View, Lake Billy Shaw, and Sheep Creek Reservoirs, the program is also designed to maintain healthy aquatic conditions for fish growth and survival, to provide superiormore » facilities with wilderness qualities to attract non-Tribal angler use, and to offer clear, consistent communication with the Tribal community about this project as well as outreach and education within the region and the local community. Tasks for this performance period are divided into operations and maintenance plus monitoring and evaluation. Operation and maintenance of the three reservoirs include fences, roads, dams and all reservoir structures, feeder canals, water troughs and stock ponds, educational signs, vehicles and equipment, and outhouses. Monitoring and evaluation activities included creel, gillnet, wildlife, and bird surveys, water quality and reservoir structures monitoring, native vegetation planting, photo point documentation, control of encroaching exotic vegetation, and community outreach and education. The three reservoirs are monitored in terms of water quality and fishery success. Sheep Creek Reservoir was very unproductive this year as a fishery. Fish morphometric and water quality data indicate that the turbidity is severely impacting trout survival. Lake Billy Shaw was very productive as a fishery and received good ratings from anglers. Mountain View was also productive and anglers reported a high number of quality sized fish. Water quality (specifically dissolved oxygen and temperature) is the main limiting factor in our fisheries.« less

Lineage Selection and the Maintenance of Sex

PubMed Central

de Vienne, Damien M.; Giraud, Tatiana; Gouyon, Pierre-Henri

2013-01-01

Sex predominates in eukaryotes, despite its short-term disadvantage when compared to asexuality. Myriad models have suggested that short-term advantages of sex may be sufficient to counterbalance its twofold costs. However, despite decades of experimental work seeking such evidence, no evolutionary mechanism has yet achieved broad recognition as explanation for the maintenance of sex. We explore here, through lineage-selection models, the conditions favouring the maintenance of sex. In the first model, we allowed the rate of transition to asexuality to evolve, to determine whether lineage selection favoured species with the strongest constraints preventing the loss of sex. In the second model, we simulated more explicitly the mechanisms underlying the higher extinction rates of asexual lineages than of their sexual counterparts. We linked extinction rates to the ecological and/or genetic features of lineages, thereby providing a formalisation of the only figure included in Darwin's “The origin of species”. Our results reinforce the view that the long-term advantages of sex and lineage selection may provide the most satisfactory explanations for the maintenance of sex in eukaryotes, which is still poorly recognized, and provide figures and a simulation website for training and educational purposes. Short-term benefits may play a role, but it is also essential to take into account the selection of lineages for a thorough understanding of the maintenance of sex. PMID:23825582

Meaning and purpose in the lives of persons with AIDS.

PubMed

Coward, D D

1994-10-01

Little research has been reported that explores meaning-discovery and meaning-making in persons with AIDS. Self-transcendence experiences, as proposed by Reed (1991), may lead to maintenance or restoration of mental health in persons facing end-of-life issues. Nurses who work with persons with life-threatening illness, such as men and women with AIDS, have opportunities to facilitate choices that lead to experiences from which meaning and emotional well-being may be obtained. This study used a phenomenological approach to describe experiences of 10 men and 10 women with AIDS that led to feelings of increased self-worth, purpose, and meaning in their lives. Participants provided oral or written descriptions of experiences associated with feelings of increased connectedness with others, sense of well-being, and hope for longer life. Data were analyzed using Colaizzi's phenomenological technique (1978). Although men and women with AIDS faced some of the same issues, their responses were different. By incorporating gender and individual differences, nurses may be better able to create therapeutic exchanges in which self-transcendence views and behaviors are fostered in both men and women with AIDS.

Reference manual for the Thermal Analyst's Help Desk Expert System

NASA Technical Reports Server (NTRS)

Ormsby, Rachel A.

1994-01-01

This document provides technical information and programming guidance for the maintenance and future development of the Thermal Analyst's Help Desk. Help Desk is an expert system that operates within the EXSYSTM expert system shell, and is used to determine first approximations of thermal capacity for spacecraft and instruments. The five analyses supported in Help Desk are: (1) surface area required for a radiating surface, (2) equilibrium temperature of a surface, (3) enclosure temperature and heat loads for a defined position in orbit, (4) enclosure temperature and heat loads over a complete orbit and, (5) selection of appropriate surface properties. The two geometries supported by Help Desk are a single flat plate and a rectangular box enclosure. The technical information includes the mathematical approach and analytical derivations used in the analyses such as: radiation heat balance, view factor calculation, and orbit determination with coordinate transformation. The programming guide for developers describes techniques for enhancement of Help Desk. Examples are provided showing the addition of new features, user interface development and enhancement, and external program interfaces.

Effectiveness of cognitive behavioral therapy supported by virtual reality in the treatment of body image in eating disorders: one year follow-up.

PubMed

Marco, José H; Perpiñá, Conxa; Botella, Cristina

2013-10-30

Body image disturbance is a significant maintenance and prognosis factor in eating disorders. Hence, existing eating disorder treatments can benefit from direct intervention in patients' body image. No controlled studies have yet compared eating disorder treatments with and without a treatment component centered on body image. This paper includes a controlled study comparing Cognitive Behavioral Treatment (CBT) for eating disorders with and without a component for body image treatment using Virtual Reality techniques. Thirty-four participants diagnosed with eating disorders were evaluated and treated. The clinical improvement was analyzed from statistical and clinical points of view. Results showed that the patients who received the component for body image treatment improved more than the group without this component. Furthermore, improvement was maintained in post-treatment and at one year follow-up. The results reveal the advantage of including a treatment component addressing body image disturbances in the protocol for general treatment of eating disorders. The implications and limitations of these results are discussed below. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Skeletal Geometry and Indices of Bone Strength in Artistic Gymnasts

PubMed Central

Dowthwaite, Jodi N.; Scerpella, Tamara A.

2010-01-01

This review addresses bone geometry and indices of skeletal strength associated with exposure to gymnastic loading during growth. A brief background characterizes artistic gymnastics as a mechanical loading model and outlines densitometric techniques, skeletal outcomes and challenges in assessment of skeletal adaptation. The literature on bone geometric adaptation to gymnastic loading is sparse and consists of results for disparate skeletal sites, maturity phases, gender compositions and assessment methods, complicating synthesis of an overriding view. Furthermore, most studies assess only females, with little information on males and adults. Nonetheless, gymnastic loading during growth appears to yield significant enlargement of total and cortical bone geometry (+10 to 30%) and elevation of trabecular density (+20%) in the forearm, yielding elevated indices of skeletal strength (+20 to +50%). Other sites exhibit more moderate geometric and densitometric adaptations (5 to 15%). Mode of adaptation appears to be site-specific; some sites demonstrate marked periosteal and endosteal expansion, whereas other sites exhibit negligible or moderate periosteal expansion coupled with endocortical contraction. Further research is necessary to address sex-, maturity- and bone tissue-specific adaptation, as well as maintenance of benefits beyond loading cessation. PMID:19949278

Safety of Sculptra: a review of clinical trial data.

PubMed

Engelhard, Peter; Humble, Gail; Mest, Douglas

2005-12-01

The development of facial lipoatrophy as a result of highly active antiretroviral therapy (HAART) used to treat patients with human immunodeficiency virus (HIV) has adversely affected patient quality of life and compliance with therapy. Thanks to modern pharmacotherapies, HIV can now be viewed as a chronic disease; however, this welcome change has exacerbated the effect of facial lipoatrophy since HIV-infected patients can now expect to live longer and healthier lives but remain subject to public scrutiny of their ongoing disease state. Sculptra (Dermik Laboratories, Berwyn, PA, USA) has recently been introduced in the USA for correction of the appearance of facial lipoatrophy. The device affords long-lasting restoration while still being non-permanent, thus providing an extended but adjustable cosmetic effect. The safety profile of this product has been observed in four investigator-initiated clinical trials of more than 250 HIV patients and in numerous investigator reports, with no serious adverse events or infections deemed associated with the product. Maintenance of the excellent safety profile for this injectable device requires adherence to a novel technique and appreciation of its unique attributes.

Requirements for plant coexistence through pollination niche partitioning

PubMed Central

Benadi, Gita

2015-01-01

Plant–pollinator interactions are often thought to have been a decisive factor in the diversification of flowering plants, but to be of little or no importance for the maintenance of existing plant diversity. In a recent opinion paper, Pauw (2013 Trends Ecol. Evol. 28, 30–37. (doi:10.1016/j.tree.2012.07.019)) challenged this view by proposing a mechanism of diversity maintenance based on pollination niche partitioning. In this article, I investigate under which conditions the mechanism suggested by Pauw can promote plant coexistence, using a mathematical model of plant and pollinator population dynamics. Numerical simulations show that this mechanism is most effective when the costs of searching for flowers are low, pollinator populations are strongly limited by resources other than pollen and nectar, and plant–pollinator interactions are sufficiently specialized. I review the empirical literature on these three requirements, discuss additional factors that may be important for diversity maintenance through pollination niche partitioning, and provide recommendations on how to detect this coexistence mechanism in natural plant communities. PMID:26108627

Plugging Leaks.

ERIC Educational Resources Information Center

Fitzemeyer, Ted

2000-01-01

Explains how routine maintenance can help schools and universities avoid plumbing disasters. Common trouble spots and preventive techniques are discussed, as are tips for making repairs without disrupting school activities. (GR)

DATMAN: A reliability data analysis program using Bayesian updating

DOE Office of Scientific and Technical Information (OSTI.GOV)

Becker, M.; Feltus, M.A.

1996-12-31

Preventive maintenance (PM) techniques focus on the prevention of failures, in particular, system components that are important to plant functions. Reliability-centered maintenance (RCM) improves on the PM techniques by introducing a set of guidelines by which to evaluate the system functions. It also minimizes intrusive maintenance, labor, and equipment downtime without sacrificing system performance when its function is essential for plant safety. Both the PM and RCM approaches require that system reliability data be updated as more component failures and operation time are acquired. Systems reliability and the likelihood of component failures can be calculated by Bayesian statistical methods, whichmore » can update these data. The DATMAN computer code has been developed at Penn State to simplify the Bayesian analysis by performing tedious calculations needed for RCM reliability analysis. DATMAN reads data for updating, fits a distribution that best fits the data, and calculates component reliability. DATMAN provides a user-friendly interface menu that allows the user to choose from several common prior and posterior distributions, insert new failure data, and visually select the distribution that matches the data most accurately.« less

Determination of the Conservation Time of Periodicals for Optimal Shelf Maintenance of a Library.

ERIC Educational Resources Information Center

Miyamoto, Sadaaki; Nakayama, Kazuhiko

1981-01-01

Presents a method based on a constrained optimization technique that determines the time of removal of scientific periodicals from the shelf of a library. A geometrical interpretation of the theoretical result is given, and a numerical example illustrates how the technique is applicable to real bibliographic data. (FM)

Development of a new technique (ATP) for training visually impaired children in oral hygiene maintenance.

PubMed

Hebbal, M; Ankola, A V

2012-10-01

To develop a special oral health education technique and compare plaque scores before and after health education. Non-randomised before and after comparison trial without controls. The final study population comprised of 96 visually impaired children aged 6-18 years old. Silness and Loe plaque index scores were recorded at baseline. 'Audio tactile performance technique' (ATP Technique) a specially designed health education method was used to educate these children regarding oral hygiene maintenance. Periodic reinforcement of health education was performed at an interval of 9 months. Re-examination was carried out after 18 months of health education to assess plaque scores. Wilcoxon's sign rank test and paired t test was used to assess the difference between the scores before and after health education. There was increase in frequency of tooth brushing after health education. The mean plaque scores pre- and post-health education were 1.41 (+/-0.58) and 0.63 (+/-0.39) respectively. The difference was statistically significant (p<0.001). Visually impaired children could maintain an acceptable level of oral hygiene when taught using special customised methods.

Maintenance Energy Requirements of Double-Muscled Belgian Blue Beef Cows

PubMed Central

Fiems, Leo O.; De Boever, Johan L.; Vanacker, José M.; De Campeneere, Sam

2015-01-01

Simple Summary Double-muscled Belgian Blue animals are extremely lean, characterized by a deviant muscle fiber type with more fast-glycolytic fibers, compared to non-double-muscled animals. This fiber type may result in lower maintenance energy requirements. On the other hand, lean meat animals mostly have a higher rate of protein turnover, which requires more energy for maintenance. Therefore, maintenance requirements of Belgian Blue cows were investigated based on a zero body weight gain. This technique showed that maintenance energy requirements of double-muscled Belgian Blue beef cows were close to the mean requirements of cows of other beef genotypes. Abstract Sixty non-pregnant, non-lactating double-muscled Belgian Blue (DMBB) cows were used to estimate the energy required to maintain body weight (BW). They were fed one of three energy levels for 112 or 140 days, corresponding to approximately 100%, 80% or 70% of their total energy requirements. The relationship between daily energy intake and BW and daily BW change was developed using regression analysis. Maintenance energy requirements were estimated from the regression equation by setting BW gain to zero. Metabolizable and net energy for maintenance amounted to 0.569 ± 0.001 and 0.332 ± 0.001 MJ per kg BW0.75/d, respectively. Maintenance energy requirements were not dependent on energy level (p > 0.10). Parity affected maintenance energy requirements (p < 0.001), although the small numerical differences between parities may hardly be nutritionally relevant. Maintenance energy requirements of DMBB beef cows were close to the mean energy requirements of other beef genotypes reported in the literature. PMID:26479139

Becoming organisms: the organisation of development and the development of organisation.

PubMed

de la Rosa, Laura Nuño

2010-01-01

Despite the radical importance of embryology in the development of organicism, developmental biology remains philosophically underexplored as a theoretical and empirical resource to clarify the nature of organisms. This paper discusses how embryology can help develop the organisational definition of the organism as a differentiated, functionally integrated, and autonomous system. I distinguish two conceptions of development in the organisational tradition that yield two different conceptions of the organism: the life-history view claims that organisms can be considered as such during their whole ontogeny; the constitutive view distinguishes two periods in the life history, a period of generation and a period of self-maintenance of a constitutive organisation. Arguing in favour of the constitutive view, it will be claimed that the organisational criteria for the definition of organism (i.e., differentiation, functional integration, and autonomy) can only be applied to the developmental system when it has entered the period of self-maintenance of a constitutive organisation. Under the light of current research in developmental biology, it is possible to make explicit how organisms come to be as organisms. To this end, I explore key ontogenetic events that help us clarify the core aspects of animal organisation and allow us to identify the developmental stage that marks the ontological transition between an organism in potency and an organism in actuality. The structure of this ontogenetic unfolding parallels the conceptual structure of the very notion of organism; the generation of the being of a particular organism parallels its definition.

Low-Cost Oil Quality Sensor Based on Changes in Complex Permittivity

PubMed Central

Pérez, Angel Torres; Hadfield, Mark

2011-01-01

Real time oil quality monitoring techniques help to protect important industry assets, minimize downtime and reduce maintenance costs. The measurement of a lubricant’s complex permittivity is an effective indicator of the oil degradation process and it can be useful in condition based maintenance (CBM) to select the most adequate oil replacement maintenance schedules. A discussion of the working principles of an oil quality sensor based on a marginal oscillator to monitor the losses of the dielectric at high frequencies (>1 MHz) is presented. An electronic design procedure is covered which results in a low cost, effective and ruggedized sensor implementation suitable for use in harsh environments. PMID:22346666

Exploring the role of quantitative feedback in inhaler technique education: a cluster-randomised, two-arm, parallel-group, repeated-measures study.

PubMed

Toumas-Shehata, Mariam; Price, David; Basheti, Iman Amin; Bosnic-Anticevich, Sinthia

2014-11-13

Feedback is a critical component of any educational intervention. When it comes to feedback associated with inhaler technique education, there is a lack of knowledge on its role or its potential to solve the major issue of poor inhaler technique. This study aims to explore the role of feedback in inhaler technique education and its impact on the inhaler technique of patients over time. A parallel-group, repeated-measures study was conducted in the community pharmacy in which the effectiveness of current best practice inhaler technique education utilising qualitative visual feedback (Group 1) was compared with a combination of qualitative and quantitative visual feedback (Group 2). The impact of these two interventions on inhaler technique maintenance was evaluated. Community pharmacists were randomly allocated to recruit people with asthma who were using a dry powder inhaler. At Visit 1 their inhaler technique was evaluated and education delivered and they were followed up at Visit 2 (1 month later). Both educational interventions resulted in an increase in the proportion of patients with correct inhaler technique: from 4% to 51% in Group 1 and from 6% to 83% in Group 2 (Pearson's Chi-Squared, P=0.03, n=49, and Pearson's Chi-Squared, P=0.01, n=48, respectively). The magnitude of improvement was statistically significantly higher for Group 2 compared with Group 1 (n=97, P=0.02, Pearson's Chi-Square test). The nature of feedback has an impact on the effectiveness of inhaler technique education with regard to correct inhaler technique maintenance over time.

Views of policy makers and health promotion professionals on factors facilitating implementation and maintenance of interventions and policies promoting physical activity and healthy eating: results of the DEDIPAC project.

PubMed

Muellmann, Saskia; Steenbock, Berit; De Cocker, Katrien; De Craemer, Marieke; Hayes, Catherine; O'Shea, Miriam P; Horodyska, Karolina; Bell, Justyna; Luszczynska, Aleksandra; Roos, Gun; Langøien, Lars Jørun; Rugseth, Gro; Terragni, Laura; De Bourdeaudhuij, Ilse; Brug, Johannes; Pischke, Claudia R

2017-12-06

The uptake, implementation, and maintenance of effective interventions promoting physical activity (PA) and a healthy diet and the implementation of policies targeting these behaviors are processes not well understood. We aimed to gain a better understanding of what health promotion professionals and policy makers think are important factors facilitating adoption, implementation, and maintenance of multi-level interventions and policies promoting healthy eating and PA in Belgium, Germany, Ireland, Norway, and Poland. Six interventions and six policies were identified based on pre-defined criteria. Forty semi-structured interviews were conducted with stakeholders from various sectors to elicit information on factors impacting adoption, implementation, and maintenance of these interventions and policies. All interview transcripts were coded in NVivo, using a common categorization matrix. Coding in the respective countries was done by one researcher and validated by a second researcher. Active involvement of relevant stakeholders and good communication between coordinating organizations were described as important factors contributing to successful adoption and implementation of both interventions and policies. Additional facilitating factors included sufficient training of staff and tailoring of materials to match needs of various target groups. The respondents indicated that maintenance of implemented interventions/policies depended on whether they were embedded in existing or newly created organizational structures in different settings and whether continued funding was secured. Despite considerable heterogeneity of interventions and health policies in the five countries, stakeholders across these countries identify similar factors facilitating adoption, implementation, and maintenance of these interventions and policies.

Enhancements to the Network Repair Level Analysis (NRLA) Model Using Marginal Analysis Techniques and Centralized Intermediate Repair Facility (CIRF) Maintenance Concepts.

DTIC Science & Technology

1983-12-01

while at the same time improving its operational efficiency. Through their integration and use, System Program Managers have a comprehensive analytical... systems . The NRLA program is hosted on the CREATE Operating System and contains approxiamately 5500 lines of computer code. It consists of a main...associated with C alternative maintenance plans. As the technological complexity of weapons systems has increased new and innovative logisitcal support

Long-axis view for ultrasound-guided central venous catheter placement via the internal jugular vein.

PubMed

Mahan, Angel F; McEvoy, Matthew D; Gravenstein, Nikolaus

2016-04-01

In modern practice, real-time ultrasound guidance is commonly employed for the placement of internal jugular vein catheters. With a new tool, such as ultrasound, comes the opportunity to refine and further optimize the ultrasound view during jugular vein catheterization. We describe jugular vein access techniques and use the long-axis view as an alternative to the commonly employed short-axis cross-section view for internal jugular vein access and cannulation. The long-axis ultrasound-guided internal jugular vein approach for internal jugular vein cannulation is a useful alternative technique that can provide better needle tip and guidewire visualization than the more traditional short-axis ultrasound view.

Interference within the Focus of Attention: Working Memory Tasks Reflect More than Temporary Maintenance

ERIC Educational Resources Information Center

Shipstead, Zach; Engle, Randall W.

2013-01-01

One approach to understanding working memory (WM) holds that individual differences in WM capacity arise from the amount of information a person can store in WM over short periods of time. This view is especially prevalent in WM research conducted with the visual arrays task. Within this tradition, many researchers have concluded that the average…

The Use of Video Prompting on the Acquisition, Maintenance, and Generalization of a Line Dance by Adolescents with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Gies, Maria Louise

2012-01-01

Educators are in need of appropriate interventions for teaching individuals with autism spectrum disorders (ASD). A widely used (Bellini & Akullian, 2007; Delano, 2007) and evidence-based (Horner et al., 2005) instructional intervention for individuals with ASD is video modeling. Video modeling involves the learner viewing a video…

SKYLAB (SL)-2 - HARDWARE (SAW)

NASA Image and Video Library

1973-06-04

S73-27384 (June 1973) --- A close-up view of the surgical band saw, a surgical tool in the therapeutic kit of the Inflight Medical Support System aboard the Skylab 1 & 2 space station cluster now in Earth orbit. Since this instrument can cut through metal (as illustrated here), it can be used in making emergency maintenance repairs aboard the space station. Photo credit: NASA

Geometric database maintenance using CCTV cameras and overlay graphics

NASA Astrophysics Data System (ADS)

Oxenberg, Sheldon C.; Landell, B. Patrick; Kan, Edwin

1988-01-01

An interactive graphics system using closed circuit television (CCTV) cameras for remote verification and maintenance of a geometric world model database has been demonstrated in GE's telerobotics testbed. The database provides geometric models and locations of objects viewed by CCTV cameras and manipulated by telerobots. To update the database, an operator uses the interactive graphics system to superimpose a wireframe line drawing of an object with known dimensions on a live video scene containing that object. The methodology used is multipoint positioning to easily superimpose a wireframe graphic on the CCTV image of an object in the work scene. An enhanced version of GE's interactive graphics system will provide the object designation function for the operator control station of the Jet Propulsion Laboratory's telerobot demonstration system.

Acceptability of financial incentives for maintenance of weight loss in mid-older adults: a mixed methods study.

PubMed

McGill, Bronwyn; O'Hara, Blythe J; Grunseit, Anne C; Bauman, Adrian; Osborne, Dale; Lawler, Luke; Phongsavan, Philayrath

2018-02-13

Health insurers worldwide implement financial incentive schemes to encourage health-related behaviours, including to facilitate weight loss. The maintenance of weight loss is a public health challenge, and as non-communicable diseases become more prevalent with increasing age, mid-older adults could benefit from programs which motivate weight loss maintenance. However, little is understood about their perceptions of using financial incentives to maintain weight loss. We used mixed methods to explore the attitudes and views of participants who had completed an Australian weight loss and lifestyle modification program offered to overweight and obese health insurance members with weight-related chronic diseases, about the acceptability and usefulness of different types of financial incentives to support weight loss maintenance. An online survey was completed by 130 respondents (mean age = 64 years); and a further 28 participants (mean age = 65 years) attended six focus groups. Both independent samples of participants supported a formalised maintenance program. Online survey respondents reported that non-cash (85.2%) and cash (77%) incentives would be potentially motivating; but only 40.5% reported that deposit contracts would motivate weight loss maintenance. Results of in-depth discussions found overall low support for any type of financial incentive, but particularly deposit contracts and lotteries. Some participants expressed that improved health was of more value than a monetary incentive and that they felt personally responsible for their own health, which was at odds with the idea of financial incentives. Others suggested ongoing program and peer support as potentially useful for weight loss maintenance. If financial incentives are considered for mid-older Australian adults in the health insurance setting, program planners will need to balance the discordance between participant beliefs about the individual responsibility for health and their desire for external supports to motivate and sustain weight loss maintenance.

Care and Maintenance.

ERIC Educational Resources Information Center

Hampton, Carolyn H.; Hampton, Carol D.

1981-01-01

Techniques are described for using living plants in the elementary science classroom including the germination and planting of seeds, transplanting seedlings, vegetative propagation, stem and leaf cuttings, and other plant studies. (DS)

Integration of RAMS in LCC analysis for linear transport infrastructures. A case study for railways.

NASA Astrophysics Data System (ADS)

Calle-Cordón, Álvaro; Jiménez-Redondo, Noemi; Morales-Gámiz, F. J.; García-Villena, F. A.; Garmabaki, Amir H. S.; Odelius, Johan

2017-09-01

Life-cycle cost (LCC) analysis is an economic technique used to assess the total costs associated with the lifetime of a system in order to support decision making in long term strategic planning. For complex systems, such as railway and road infrastructures, the cost of maintenance plays an important role in the LCC analysis. Costs associated with maintenance interventions can be more reliably estimated by integrating the probabilistic nature of the failures associated to these interventions in the LCC models. Reliability, Maintainability, Availability and Safety (RAMS) parameters describe the maintenance needs of an asset in a quantitative way by using probabilistic information extracted from registered maintenance activities. Therefore, the integration of RAMS in the LCC analysis allows obtaining reliable predictions of system maintenance costs and the dependencies of these costs with specific cost drivers through sensitivity analyses. This paper presents an innovative approach for a combined RAMS & LCC methodology for railway and road transport infrastructures being developed under the on-going H2020 project INFRALERT. Such RAMS & LCC analysis provides relevant probabilistic information to be used for condition and risk-based planning of maintenance activities as well as for decision support in long term strategic investment planning.

Coordination between Generation and Transmission Maintenance Scheduling by Means of Multi-agent Technique

NASA Astrophysics Data System (ADS)

Nagata, Takeshi; Tao, Yasuhiro; Utatani, Masahiro; Sasaki, Hiroshi; Fujita, Hideki

This paper proposes a multi-agent approach to maintenance scheduling in restructured power systems. The restructuring of electric power industry has resulted in market-based approaches for unbundling a multitude of service provided by self-interested entities such as power generating companies (GENCOs), transmission providers (TRANSCOs) and distribution companies (DISCOs). The Independent System Operator (ISO) is responsible for the security of the system operation. The schedule submitted to ISO by GENCOs and TRANSCOs should satisfy security and reliability constraints. The proposed method consists of several GENCO Agents (GAGs), TARNSCO Agents (TAGs) and a ISO Agent(IAG). The IAG’s role in maintenance scheduling is limited to ensuring that the submitted schedules do not cause transmission congestion or endanger the system reliability. From the simulation results, it can be seen the proposed multi-agent approach could coordinate between generation and transmission maintenance schedules.

Development of a Large Field of View Shadowgraph System for a 16 Ft. Transonic Wind Tunnel

NASA Technical Reports Server (NTRS)

Talley, Michael A.; Jones, Stephen B.; Goodman, Wesley L.

2000-01-01

A large field of view shadowgraph flow visualization system for the Langley 16 ft. Transonic Tunnel (16 ft.TT) has been developed to provide fast, low cost, aerodynamic design concept evaluation capability to support the development of the next generation of commercial and military aircraft and space launch vehicles. Key features of the 16 ft. TT shadowgraph system are: (1) high resolution (1280 X 1024) digital snap shots and sequences; (2) video recording of shadowgraph at 30 frames per second; (3) pan, tilt, & zoom to find and observe flow features; (4) one microsecond flash for freeze frame images; (5) large field of view approximately 12 X 6 ft; and (6) a low maintenance, high signal/noise ratio, retro-reflective screen to allow shadowgraph imaging while test section lights are on.

Objective for monitoring the corona discharge

NASA Astrophysics Data System (ADS)

Obrezkov, Andrey; Rodionov, Andrey Yu.; Pisarev, Viktor N.; Chivanov, Alexsey N.; Baranov, Yuri P.; Korotaev, Valery V.

2016-04-01

Remote optoelectronic probing is one of the most actual aspects of overhead electric line maintenances. By installing such systems on a helicopter (for example) it becomes possible to monitor overhead transmission line status and to search damaged parts of the lines. Thermal and UV-cameras are used for more effective diagnostic. UV-systems are fitted with filters, that attenuate visible spectrum, which is an undesired type of signal. Also these systems have a wide view angle for better view and proper diagnostics. For even more effectiveness, it is better to use several spectral channels: like UV and IR. Such spectral selection provides good noise reduction. Experimental results of spectral parameters of the wide view angle multispectral objective for such systems are provided in this report. There is also data on point spread function, UV and IR scattering index data and technical requirements for detectors.

Closeup view of the Pilot's Seat on the Flight Deck ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Close-up view of the Pilot's Seat on the Flight Deck of the Orbiter Discovery. It appears the Orbiter is in the roll out / launch pad configuration. A protective cover is over the Rotational Hand Controller to protect it during the pilot's ingress. Control panels R1 and R2 are prominent in this view. Panel R1 has switches for control and maintenance of on-board cryogenics for the fuel cells among other functions and panel R2 has switches and controls for the Auxiliary Power Units, ET umbilical doors as well as other operational controls. Note the portable fire extinguisher in the lower right corner of the image. This photograph was taken at Kennedy Space Center. - Space Transportation System, Orbiter Discovery (OV-103), Lyndon B. Johnson Space Center, 2101 NASA Parkway, Houston, Harris County, TX

LabVIEW application for motion tracking using USB camera

NASA Astrophysics Data System (ADS)

Rob, R.; Tirian, G. O.; Panoiu, M.

2017-05-01

The technical state of the contact line and also the additional equipment in electric rail transport is very important for realizing the repairing and maintenance of the contact line. During its functioning, the pantograph motion must stay in standard limits. Present paper proposes a LabVIEW application which is able to track in real time the motion of a laboratory pantograph and also to acquire the tracking images. An USB webcam connected to a computer acquires the desired images. The laboratory pantograph contains an automatic system which simulates the real motion. The tracking parameters are the horizontally motion (zigzag) and the vertically motion which can be studied in separate diagrams. The LabVIEW application requires appropriate tool-kits for vision development. Therefore the paper describes the subroutines that are especially programmed for real-time image acquisition and also for data processing.

Development of scanning holographic display using MEMS SLM

NASA Astrophysics Data System (ADS)

Takaki, Yasuhiro

2016-10-01

Holography is an ideal three-dimensional (3D) display technique, because it produces 3D images that naturally satisfy human 3D perception including physiological and psychological factors. However, its electronic implementation is quite challenging because ultra-high resolution is required for display devices to provide sufficient screen size and viewing zone. We have developed holographic display techniques to enlarge the screen size and the viewing zone by use of microelectromechanical systems spatial light modulators (MEMS-SLMs). Because MEMS-SLMs can generate hologram patterns at a high frame rate, the time-multiplexing technique is utilized to virtually increase the resolution. Three kinds of scanning systems have been combined with MEMS-SLMs; the screen scanning system, the viewing-zone scanning system, and the 360-degree scanning system. The screen scanning system reduces the hologram size to enlarge the viewing zone and the reduced hologram patterns are scanned on the screen to increase the screen size: the color display system with a screen size of 6.2 in. and a viewing zone angle of 11° was demonstrated. The viewing-zone scanning system increases the screen size and the reduced viewing zone is scanned to enlarge the viewing zone: a screen size of 2.0 in. and a viewing zone angle of 40° were achieved. The two-channel system increased the screen size to 7.4 in. The 360-degree scanning increases the screen size and the reduced viewing zone is scanned circularly: the display system having a flat screen with a diameter of 100 mm was demonstrated, which generates 3D images viewed from any direction around the flat screen.

A framework for the design of a voice-activated, intelligent, and hypermedia-based aircraft maintenance manual

NASA Astrophysics Data System (ADS)

Patankar, Manoj Shashikant

Federal Aviation Regulations require Aviation Maintenance Technicians (AMTs) to refer to approved maintenance manuals when performing maintenance on airworthy aircraft. Because these manuals are paper-based, larger the size of the aircraft, more cumbersome are the manuals. Federal Aviation Administration (FAA) recognized the difficulties associated with the use of large manuals and conducted studies on the use of electronic media as an alternative to the traditional paper format. However, these techniques do not employ any artificial intelligence technologies and the user interface is limited to either a keyboard or a stylus pen. The primary emphasis of this research was to design a generic framework that would allow future development of voice-activated, intelligent, and hypermedia-based aircraft maintenance manuals. A prototype (VIHAMS-Voice-activated, Intelligent, and Hypermedia-based Aircraft Maintenance System) was developed, as a secondary emphasis, using the design and development techniques that evolved from this research. An evolutionary software design approach was used to design the proposed framework and the structured rapid prototyping technique was used to produce the VIHAMS prototype. VoiceAssist by Creative Labs was used to provide the voice interface so that the users (AMTs) could keep their hands free to work on the aircraft while maintaining complete control over the computer through discrete voice commands. KnowledgePro for Windows sp{TM}, an expert system shell, provided "intelligence" to the prototype. As a result of this intelligence, the system provided expert guidance to the user. The core information contained in conventional manuals was available in a hypermedia format. The prototype's operating hardware included a notebook computer with a fully functional audio system. An external microphone and the built-in speaker served as the input and output devices (along with the color monitor), respectively. Federal Aviation Administration estimates the United States air carriers to operate 3,991 large jet aircraft in the year 1996 (FAA Aviation Forecasts, 1987-1998). With an estimate of seventy manuals per such aircraft, the development of intelligent manuals is expected to impact 279,370 manuals in this country. Soon, over 55 thousand maintenance technicians will be able to carry the seven pound system to an aircraft, use voice commands to access the aircraft's files on the system, seek assistance from the expert system to diagnose the fault, and obtain instructions on how to rectify the fault. The evolutionary design approach and the rapid prototyping techniques were very well suited for the spiral testing strategy. Therefore, this strategy was used to test the structural and functional validity of this research. Professors Darrell Anderson and Brian Stout (Aviation faculty at San Jose State University) and Mr. Gregory Shea (a United Airlines mechanic and SJSU student) are representatives of the real-world users of the final product. Therefore, they conducted the alpha test of this prototype. Mr. Daniel Neal and Mr. Stephen Harms have been actively involved in light aircraft maintenance for more than ten years. They evaluated the prototype's usability. All the above evaluators used standard testing tools and evaluated the prototype under field conditions. The evaluators concluded that the VIHAMS prototype used a valid fault diagnosis strategy, the system architecture could be used to develop similar systems using off-the-shelf tools, and the voice input system could be refined to improve its usability.

Modeling maintenance-strategies with rainbow nets

NASA Astrophysics Data System (ADS)

Johnson, Allen M., Jr.; Schoenfelder, Michael A.; Lebold, David

The Rainbow net (RN) modeling technique offers a promising alternative to traditional reliability modeling techniques. RNs are evaluated through discrete event simulation. Using specialized tokens to represent systems and faults, an RN models the fault-handling behavior of an inventory of systems produced over time. In addition, a portion of the RN represents system repair and the vendor's spare part production. Various dependability parameters are measured and used to calculate the impact of four variations of maintenance strategies. Input variables are chosen to demonstrate the technique. The number of inputs allowed to vary is intentionally constrained to limit the volume of data presented and to avoid overloading the reader with complexity. If only availability data were reviewed, it is possible that the conclusion might be drawn that both strategies are about the same and therefore the cheaper strategy from the vendor's perspective may be chosen. The richer set of metrics provided by the RN simulation gives greater insight into the problem, which leads to better decisions. By using RNs, the impact of several different variables is integrated.

A Comparison of Adaptive and Nonadaptive Training Strategies in the Acquisition of a Physically Complex Psychomotor Skill.

ERIC Educational Resources Information Center

Riedel, James A.; And Others

Results of research to determine if an adaptive technique could be used to teach a physically complex psychomotor skill (specifically, performing on an arc welding simulator) more efficiently than the skill could be taught with a nonadaptive technique are presented. Sixty hull maintenance technician firemen and fireman apprentice trainees were…

Occupational Safety. Hand Tools. Pre-Apprenticeship Phase 1 Training.

ERIC Educational Resources Information Center

Lane Community Coll., Eugene, OR.

This self-paced student training module on safety when using hand tools is one of a number of modules developed for Pre-apprenticeship Phase 1 Training. Purpose of the module is to teach students the correct safety techniques for operating common hand- and arm-powered tools, including selection, maintenance, technique, and uses. The module may…

A simple technique for maintaining Simulium adults, including onchocerciasis vectors, under artificial conditions*

PubMed Central

Raybould, John N.; Mhiddin, Haji K.

1974-01-01

The maintenance of Simulium adults in the laboratory is necessary for many experimental investigations and is a prerequisite to laboratory colonization. A simple technique for this purpose is described in which each fly is kept separately in a hole bored in a block of expanded polystyrene. ImagesFig. 1 PMID:4549353

Views of Classroom Teachers Concerning Students with Reading Difficulties

ERIC Educational Resources Information Center

Kayabasi, Zehra Esra Ketenoglu

2017-01-01

This study aimed to try to understand the views and attitudes of classroom teachers concerning students with reading difficulties. Data was collected using the semi-structured interview technique, which is among the qualitative data collection techniques. The researcher prepared a semi-structured interview with 5 questions to be addressed to…

Demonstration of a High-Fidelity Predictive/Preview Display Technique for Telerobotic Servicing in Space

NASA Technical Reports Server (NTRS)

Kim, Won S.; Bejczy, Antal K.

1993-01-01

A highly effective predictive/preview display technique for telerobotic servicing in space under several seconds communication time delay has been demonstrated on a large laboratory scale in May 1993, involving the Jet Propulsion Laboratory as the simulated ground control station and, 2500 miles away, the Goddard Space Flight Center as the simulated satellite servicing set-up. The technique is based on a high-fidelity calibration procedure that enables a high-fidelity overlay of 3-D graphics robot arm and object models over given 2-D TV camera images of robot arm and objects. To generate robot arm motions, the operator can confidently interact in real time with the graphics models of the robot arm and objects overlaid on an actual camera view of the remote work site. The technique also enables the operator to generate high-fidelity synthetic TV camera views showing motion events that are hidden in a given TV camera view or for which no TV camera views are available. The positioning accuracy achieved by this technique for a zoomed-in camera setting was about +/-5 mm, well within the allowable +/-12 mm error margin at the insertion of a 45 cm long tool in the servicing task.

A guide to onboard checkout. Volume 4: Propulsion

NASA Technical Reports Server (NTRS)

1971-01-01

The propulsion system for a space station is considered with respect to onboard checkout requirements. Failure analysis, reliability, and maintenance features are presented. Computer analysis techniques are also discussed.

View-interpolation of sparsely sampled sinogram using convolutional neural network

NASA Astrophysics Data System (ADS)

Lee, Hoyeon; Lee, Jongha; Cho, Suengryong

2017-02-01

Spare-view sampling and its associated iterative image reconstruction in computed tomography have actively investigated. Sparse-view CT technique is a viable option to low-dose CT, particularly in cone-beam CT (CBCT) applications, with advanced iterative image reconstructions with varying degrees of image artifacts. One of the artifacts that may occur in sparse-view CT is the streak artifact in the reconstructed images. Another approach has been investigated for sparse-view CT imaging by use of the interpolation methods to fill in the missing view data and that reconstructs the image by an analytic reconstruction algorithm. In this study, we developed an interpolation method using convolutional neural network (CNN), which is one of the widely used deep-learning methods, to find missing projection data and compared its performances with the other interpolation techniques.

Despeckling Ligea Mare

NASA Image and Video Library

2015-02-12

Presented here are side-by-side comparisons of a traditional Cassini Synthetic Aperture Radar (SAR) view and one made using a new technique for handling electronic noise that results in clearer views of Titan's surface. The technique, called despeckling, produces images that can be easier for researchers to interpret. The view is a mosaic of SAR swaths over Ligeia Mare, one of the large hydrocarbons seas on Titan. In particular, despeckling improves the visibility of channels flowing down to the sea. http://photojournal.jpl.nasa.gov/catalog/PIA19052

Detection Angle Calibration of Pressure-Sensitive Paints

NASA Technical Reports Server (NTRS)

Bencic, Timothy J.

2000-01-01

Uses of the pressure-sensitive paint (PSP) techniques in areas other than external aerodynamics continue to expand. The NASA Glenn Research Center has become a leader in the application of the global technique to non-conventional aeropropulsion applications including turbomachinery testing. The use of the global PSP technique in turbomachinery applications often requires detection of the luminescent paint in confined areas. With the limited viewing usually available, highly oblique illumination and detection angles are common in the confined areas in these applications. This paper will describe the results of pressure, viewing and excitation angle dependence calibrations using three popular PSP formulations to get a better understanding of the errors associated with these non-traditional views.

40 CFR 141.33 - Record maintenance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... laboratory reports may be kept, or data may be transferred to tabular summaries, provided that the following...) Laboratory and person responsible for performing analysis; (5) The analytical technique/method used; and (6...

The impact of preventive maintenance practices on manufacturing performance: A proposed model for SMEs in Malaysia

NASA Astrophysics Data System (ADS)

Lazim, Halim Mad; Taib, Che Azlan; Lamsali, Hendrik; Saleh, Mohamed Najib; Subramaniam, Chandrakantan

2016-08-01

Preventive maintenance (PM) plays important role to avoid or mitigate potential stoppages and disruptions of equipment or machinery from occurring in daily operations. PM emphasized total employee involvement and it is important for companies as well as Small and Medium Sized Enterprises (SMEs). SME sectors contribution to the Malaysian economy makes up 95% of the total manufacturers, however PM remain relatively lacking. The ability, reliability and effective maintenance management is highly important in order to achieve desired manufacturing performance. Therefore, organizational capability in planning, controlling, implementing and monitoring PM activities is important. Furthermore, empirical evidence on the potential impact of PM practices towards manufacturing performance with organizational capability as a moderating effect is still limited and indecisive. Henceforth, this paper aims to explore and investigate potential relationships between PM practices and manufacturing performance moderated by organizational capability in the contact of Malaysian SMEs in the manufacturing sector. Correspondently, the study intends to propose a new research framework and hypotheses to examine the abovementioned relationships. The proposed framework includes PM team, PM strategy and planned maintenance as the determinants, while organizational capability serves as the moderating variable. Manufacturing performance will be viewed in terms of innovation and financial factors. Proposed research direction and conclusion are discussed at the end of the study.

Spectral analysis of views interpolated by chroma subpixel downsampling for 3D autosteroscopic displays

NASA Astrophysics Data System (ADS)

Marson, Avishai; Stern, Adrian

2015-05-01

One of the main limitations of horizontal parallax autostereoscopic displays is the horizontal resolution loss due the need to repartition the pixels of the display panel among the multiple views. Recently we have shown that this problem can be alleviated by applying a color sub-pixel rendering technique1. Interpolated views are generated by down-sampling the panel pixels at sub-pixel level, thus increasing the number of views. The method takes advantage of lower acuity of the human eye to chromatic resolution. Here we supply further support of the technique by analyzing the spectra of the subsampled images.

The Privacy Officer: A Critical Success Factor in the Implementation and Maintenance of HIPAA Legislation in DoD Medical Treatment Facilities

DTIC Science & Technology

2002-05-21

don’t mind having such records available for public viewing in the dank basement of a city hall building, observers have noted, because it takes time...Officer: The battle for trust among customers in the emerging digital economy is just getting started. The commitment of executive attention to the matter

CB-EMIS CELL PHONE CLIENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lurie, Gordon

2007-01-02

The cell phone software allows any Java enabled cell phone to view sensor and meteorological data via an internet connection using a secure connection to the CB-EMIS Web Service. Users with appropriate privileges can monitor the state of the sensors and perform simple maintenance tasks remotely. All sensitive data is downloaded from the web service, thus protecting sensitive data in the event a cell phone is lost.

Using Dynamic Sustainment to Determine the Impact of Varying Levels of Reliability on Future Combat Systems Maintenance Requirements

DTIC Science & Technology

2006-12-01

Naval Postgraduate School Monterey, California 4. Pamela Dozier Jonesboro , AR ...AGENCY NAME(S) AND ADDRESS(ES) N/A 10. SPONSORING/MONITORING AGENCY REPORT NUMBER 11. SUPPLEMENTARY NOTES The views expressed in this thesis are ...parts, and having properly trained personnel in sufficient numbers to conduct repairs are some of the logistics challenges which must be overcome to

Ideas for Planning Your Instructional Materials Center. Administration; Conference and Independent Study; Listening and Viewing; Materials Production; Reading, Research and Borrowing; Storage and Maintenance.

ERIC Educational Resources Information Center

Massachusetts School Building Assistance Commission, Boston.

This report suggests that the instructional materials center be flexible for multigroup activities, expansible for future physical growth, and central to the instructional program. Area specifications are given for the following areas: materials research, small groups, cataloging and processing materials, and listening and speaking, and for a dark…

Increased Memory Load during Task Completion when Procedures Are Presented on Mobile Screens

ERIC Educational Resources Information Center

Byrd, Keena S.; Caldwell, Barrett S.

2011-01-01

The primary objective of this research was to compare procedure-based task performance using three common mobile screen sizes: ultra mobile personal computer (7 in./17.8 cm), personal data assistant (3.5 in./8.9 cm), and SmartPhone (2.8 in./7.1 cm). Subjects used these three screen sizes to view and execute a computer maintenance procedure.…

Keys to Successful Implementation and Sustainment of Managed Maintenance for Healthcare Facilities

DTIC Science & Technology

2004-03-23

second they involve studying those phenomena in all their complexity (Leedy and Ormrod, 2001). According to Denzin and Lincoln (1994), qualitative...people being studied (Leedy and Ormrod, 2001). Research Design Methodological Triangulation Denzin and Lincoln (1994) suggest because different...the setting. This dual view is refereed to as methodological triangulation ( Denzin and Lincoln , 1994). A research design develops a logical plan for

The road maintenance funding models in Indonesia use earmarked tax

NASA Astrophysics Data System (ADS)

Gultom, Tiopan Henry M.; Tamin, Ofyar Z.; Sjafruddin, Ade; Pradono

2017-11-01

One of the solutions to get a sustainable road maintenance fund is to separate road sector revenue from other accounts, afterward, form a specific account for road maintenance. In 2001, Antameng and the Ministry of Public Works proposed a road fund model in Indonesia. Sources of the road funds proposal was a tariff formed on the nominal total tax. The policy of road funds was proposed to finance the road network maintenance of districts and provincials. This research aims to create a policy model of road maintenance funds in Indonesia using an earmarked tax mechanism. The research method is qualitative research, with data collection techniques are triangulation. Interview methods conducted were semi-structured. Strength, Weakness, Opportunities, and Threat from every part of the models were showen on the survey format. Respondents were representative of executives who involved directly against the financing of road maintenance. Validation model conducted by a discussion panel, it was called the Focus Group Discussion (FGD). The FGD involved all selected respondents. Road maintenance financing model that most appropriately applied in Indonesia was a model of revenue source use an earmarked PBBKB, PKB and PPnBM. Revenue collection mechanism was added tariff of registered vehicle tax (PKB), Vehicle Fuel Tax (PBBKB) and the luxury vehicle sales tax (PPnBM). The funds are managed at the provincial level by a public service agency.

Improvement of railway ballast maintenance approach, incorporating ballast geometry and fouling conditions

NASA Astrophysics Data System (ADS)

Sadeghi, J.; Motieyan-Najar, M. E.; Zakeri, J. A.; Yousefi, B.; Mollazadeh, M.

2018-04-01

Ballast plays an important role in the stability of railway track systems. The effectiveness of the ballast in maintaining the track stability is very much dependent on its mechanical conditions. The available ballast maintenance approaches are mainly based on only track geometry conditions (such as track profile) which do not sufficiently reflect the ballast mechanical behaviors. That is, the ballast potential of degradation (i.e., ballast long term behaviors) has been omitted. This makes the effectiveness of the current ballast maintenance approach questionable, indicating a need for a more comprehensive and effective ballast conditions assessment technique. In response to this need, two ballast condition indices based on ballast geometry degradation (BGI) and the level of ballast fouling (BFI) as the main indicators of ballast mechanical behavior were developed. The BGI is a function of the standard deviations of track alignment, unevenness and twist. The BFI was developed based on the data obtained from the ground penetration radar (GPR). Making use of the new indices, a more reliable maintenance algorithm was developed. Through illustrations of the applicability of the new maintenance algorithm in a railway line, it was shown that the new algorithm causes a considerable improvement in the maintenance effectiveness and an increase in the life cycle of railway tracks by making more effective allocation of resources and more accurate maintenance planning.

An enhanced reliability-oriented workforce planning model for process industry using combined fuzzy goal programming and differential evolution approach

NASA Astrophysics Data System (ADS)

Ighravwe, D. E.; Oke, S. A.; Adebiyi, K. A.

2018-03-01

This paper draws on the "human reliability" concept as a structure for gaining insight into the maintenance workforce assessment in a process industry. Human reliability hinges on developing the reliability of humans to a threshold that guides the maintenance workforce to execute accurate decisions within the limits of resources and time allocations. This concept offers a worthwhile point of deviation to encompass three elegant adjustments to literature model in terms of maintenance time, workforce performance and return-on-workforce investments. These fully explain the results of our influence. The presented structure breaks new grounds in maintenance workforce theory and practice from a number of perspectives. First, we have successfully implemented fuzzy goal programming (FGP) and differential evolution (DE) techniques for the solution of optimisation problem in maintenance of a process plant for the first time. The results obtained in this work showed better quality of solution from the DE algorithm compared with those of genetic algorithm and particle swarm optimisation algorithm, thus expressing superiority of the proposed procedure over them. Second, the analytical discourse, which was framed on stochastic theory, focusing on specific application to a process plant in Nigeria is a novelty. The work provides more insights into maintenance workforce planning during overhaul rework and overtime maintenance activities in manufacturing systems and demonstrated capacity in generating substantially helpful information for practice.

Frozen-Plug Technique for Liquid-Oxygen Plumbing

NASA Technical Reports Server (NTRS)

McCaskey, C. E. " Mac" ; Lobmeyer, Dennis; Nagy, Zoltan; Peltzer, Rich

2005-01-01

A frozen-plug technique has been conceived as a means of temporarily blocking the flow of liquid oxygen or its vapor through a tube or pipe. The technique makes it possible to perform maintenance, repair, or other work on downstream parts of the cryogenic system in which the oxygen is used, without having to empty an upstream liquid-oxygen reservoir and, hence, without wasting the stored liquid oxygen and without subjecting the reservoir to the stresses of thermal cycling.

The lateral crural rein flap: a novel technique for management of tip rotation in primary rhinoplasty.

PubMed

Kuran, Ismail; Öreroğlu, Ali Rıza; Efendioğlu, Kamran

2014-09-01

An important consideration in rhinoplasty is maintenance of the applied tip rotation. Different techniques have been proposed to accomplish this. Loss of rotation after surgery not only results in a derotated tip but also can create a supratip deformity. As a supplement to dorsal reconstruction, the authors introduced and applied the lateral crural rein flap technique, whereby cartilage flaps are created from the cephalic portion of the lateral crura to control and stabilize tip rotation. Eleven patients underwent primary open-approach rhinoplasty that included the lateral crural rein technique; the mean follow-up time was 18 months. Excess cephalic portions of the lateral crura were prepared as medial crura-based cartilaginous flaps and were incorporated into the nasal dorsum (similar to spreader grafts) and stabilized to achieve the desired tip rotation. The lateral crural rein flap technique provided stability to the nasal tip while minimizing derotation in the postoperative period. Long-term follow-up revealed maintenance of the nasal tip rotation and symmetric dorsal aesthetic lines. The lateral crural rein flap technique is effective for controlling nasal tip rotation while reducing lateral crural cephalic excess. Longevity of the applied tip rotation is reinforced by secure attachment of the lower nasal cartilage complex to the midvault structures. 4. © 2014 The American Society for Aesthetic Plastic Surgery, Inc.

Partial growth plate closure: apex view on bone scan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Howman-Giles, R.; Trochei, M.; Yeates, K.

1985-01-01

A new technique of using /sup 99m/Tc bone scan to assess partial closure of the growth plate is described. The site and degree of osseous fusion can be obtained by using the apex view. The technique has the potential of assessing serially the growth of a plate before and after surgery.

Documentation in a Software Maintenance Environment.

DTIC Science & Technology

1987-08-28

Michael Jackson Diagrams 0...8217 ." " . ." ." ""’, " , "" " - . -’" ,," ’" " " "’" d t Review of Documentation Techniques Michael Jackson Diagrams Michael Jackson diagrams show data...coupling and cohesion. Logic is not represented in this technique, which thus is of limited value. Advantages: Michael Jackson diagrams are similar

Building a new predictor for multiple linear regression technique-based corrective maintenance turnaround time.

PubMed

Cruz, Antonio M; Barr, Cameron; Puñales-Pozo, Elsa

2008-01-01

This research's main goals were to build a predictor for a turnaround time (TAT) indicator for estimating its values and use a numerical clustering technique for finding possible causes of undesirable TAT values. The following stages were used: domain understanding, data characterisation and sample reduction and insight characterisation. Building the TAT indicator multiple linear regression predictor and clustering techniques were used for improving corrective maintenance task efficiency in a clinical engineering department (CED). The indicator being studied was turnaround time (TAT). Multiple linear regression was used for building a predictive TAT value model. The variables contributing to such model were clinical engineering department response time (CE(rt), 0.415 positive coefficient), stock service response time (Stock(rt), 0.734 positive coefficient), priority level (0.21 positive coefficient) and service time (0.06 positive coefficient). The regression process showed heavy reliance on Stock(rt), CE(rt) and priority, in that order. Clustering techniques revealed the main causes of high TAT values. This examination has provided a means for analysing current technical service quality and effectiveness. In doing so, it has demonstrated a process for identifying areas and methods of improvement and a model against which to analyse these methods' effectiveness.

A real time study on condition monitoring of distribution transformer using thermal imager

NASA Astrophysics Data System (ADS)

Mariprasath, T.; Kirubakaran, V.

2018-05-01

The transformer is one of the critical apparatus in the power system. At any cost, a few minutes of outages harshly influence the power system. Hence, prevention-based maintenance technique is very essential. The continuous conditioning and monitoring technology significantly increases the life span of the transformer, as well as reduces the maintenance cost. Hence, conditioning and monitoring of transformer's temperature are very essential. In this paper, a critical review has been made on various conditioning and monitoring techniques. Furthermore, a new method, hot spot indication technique, is discussed. Also, transformer's operating condition is monitored by using thermal imager. From the thermal analysis, it is inferred that major hotspot locations are appearing at connection lead out; also, the bushing of the transformer is the very hottest spot in transformer, so monitoring the level of oil is essential. Alongside, real time power quality analysis has been carried out using the power analyzer. It shows that industrial drives are injecting current harmonics to the distribution network, which causes the power quality problem on the grid. Moreover, the current harmonic limit has exceeded the IEEE standard limit. Hence, the adequate harmonics suppression technique is need an hour.

Automation of steam generator services at public service electric & gas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cruickshank, H.; Wray, J.; Scull, D.

1995-03-01

Public Service Electric & Gas takes an aggressive approach to pursuing new exposure reduction techniques. Evaluation of historic outage exposure shows that over the last eight refueling outages, primary steam generator work has averaged sixty-six (66) person-rem, or, approximately tewenty-five percent (25%) of the general outage exposure at Salem Station. This maintenance evolution represents the largest percentage of exposure for any single activity. Because of this, primary steam generator work represents an excellent opportunity for the development of significant exposure reduction techniques. A study of primary steam generator maintenance activities demonstrated that seventy-five percent (75%) of radiation exposure was duemore » to work activities of the primary steam generator platform, and that development of automated methods for performing these activities was worth pursuing. Existing robotics systems were examined and it was found that a new approach would have to be developed. This resulted in a joint research and development project between Westinghouse and Public Service Electric & Gas to develop an automated system of accomplishing the Health Physics functions on the primary steam generator platform. R.O.M.M.R.S. (Remotely Operated Managed Maintenance Robotics System) was the result of this venture.« less

Ultraviolet Viewing with a Television Camera.

ERIC Educational Resources Information Center

Eisner, Thomas; And Others

1988-01-01

Reports on a portable video color camera that is fully suited for seeing ultraviolet images and offers some expanded viewing possibilities. Discusses the basic technique, specialized viewing, and the instructional value of this system of viewing reflectance patterns of flowers and insects that are invisible to the unaided eye. (CW)

Educational technology in medical education.

PubMed

Han, Heeyoung; Resch, David S; Kovach, Regina A

2013-01-01

This article aims to review the past practices of educational technology and envision future directions for medical education. The discussion starts with a historical review of definitions and perspectives of educational technology, in which the authors propose that educators adopt a broader process-oriented understanding of educational technology. Future directions of e-learning, simulation, and health information technology are discussed based on a systems view of the technological process. As new technologies continue to arise, this process-oriented understanding and outcome-based expectations of educational technology should be embraced. With this view, educational technology should be valued in terms of how well the technological process informs and facilitates learning, and the acquisition and maintenance of clinical expertise.

ADM. Aerial view of administration area. Camera facing westerly. From ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ADM. Aerial view of administration area. Camera facing westerly. From left to right in foregound: Substation (TAN-605), Warehouse (TAN-628), Gate House (TAN-601), Administration Building (TAN-602). Left to right middle ground: Service Building (TAN-603), Warehouse (later known as Maintenance Shop or Craft Shop, TAN-604), Water Well Pump Houses, Fuel Tanks and Fuel Pump Houses, and Water Storage Tanks. Change House (TAN-606) on near side of berm. Large building beyond berm is A&M. Building, TAN-607. Railroad tracks beyond lead from (unseen) turntable to the IET. Date: June 6, 1955. INEEL negative no. 13201 - Idaho National Engineering Laboratory, Test Area North, Scoville, Butte County, ID

A methodology for hard/soft information fusion in the condition monitoring of aircraft

NASA Astrophysics Data System (ADS)

Bernardo, Joseph T.

2013-05-01

Condition-based maintenance (CBM) refers to the philosophy of performing maintenance when the need arises, based upon indicators of deterioration in the condition of the machinery. Traditionally, CBM involves equipping machinery with electronic sensors that continuously monitor components and collect data for analysis. The addition of the multisensory capability of human cognitive functions (i.e., sensemaking, problem detection, planning, adaptation, coordination, naturalistic decision making) to traditional CBM may create a fuller picture of machinery condition. Cognitive systems engineering techniques provide an opportunity to utilize a dynamic resource—people acting as soft sensors. The literature is extensive on techniques to fuse data from electronic sensors, but little work exists on fusing data from humans with that from electronic sensors (i.e., hard/soft fusion). The purpose of my research is to explore, observe, investigate, analyze, and evaluate the fusion of pilot and maintainer knowledge, experiences, and sensory perceptions with digital maintenance resources. Hard/soft information fusion has the potential to increase problem detection capability, improve flight safety, and increase mission readiness. This proposed project consists the creation of a methodology that is based upon the Living Laboratories framework, a research methodology that is built upon cognitive engineering principles1. This study performs a critical assessment of concept, which will support development of activities to demonstrate hard/soft information fusion in operationally relevant scenarios of aircraft maintenance. It consists of fieldwork, knowledge elicitation to inform a simulation and a prototype.

Neurogenesis in the Developing and Adult Brain—Similarities and Key Differences

PubMed Central

Götz, Magdalena; Nakafuku, Masato; Petrik, David

2017-01-01

Adult neurogenesis in the mammalian brain is often viewed as a continuation of neurogenesis at earlier, developmental stages. Here, we will critically review the extent to which this is the case highlighting similarities as well as key differences. Although many transcriptional regulators are shared in neurogenesis at embryonic and adult stages, recent findings on the molecular mechanisms by which these neuronal fate determinants control fate acquisition and maintenance have revealed profound differences between development and adulthood. Importantly, adult neurogenesis occurs in a gliogenic environment, hence requiring adult-specific additional and unique mechanisms of neuronal fate specification and maintenance. Thus, a better understanding of the molecular logic for continuous adult neurogenesis provides important clues to develop strategies to manipulate endogenous stem cells for the purpose of repair. PMID:27235475

Germline V repertoires: Origin, maintenance, diversification.

PubMed

Steele, E J; Lindley, R A

2018-06-01

In our view, Melvin Cohn (Scand J Immunol. 2018;87:e12640) has set out the logical guidelines towards a resolution of the very real enigma of the selectability of vertebrate germline Ig V repertoires under the current evolutionary paradigm…" A somatically derived repertoire scrambles this (germline VL + VH) substrate so that its specificities are lost, making it un-selectable in the germline. Consequently, evolution faced an incompatibility." It is argued here in Reply that a reverse transcriptase-based soma-to-germline process (S->G) targeting germline V segment arrays goes some considerable way to resolving fundamental contradictions on the origin, maintenance and then real-time adaptive diversification of these limited sets of V segments encoded within various V repertoire arrays. © 2018 The Foundation for the Scandinavian Journal of Immunology.

Understanding the needs of hand control users, driver rehabilitation specialists, and dealers/installers.

PubMed

Lowe, Evan; Drouin, Nathalie; Venhovens, Paul J; Brooks, Johnell O

2014-10-01

Understanding unique perspectives from key stakeholder groups involved in the hand control (HC) industry, including driver rehabilitation specialists (DRSs) who train users how to use their HCs, dealers/installers, and users, may become increasingly important in the United States due to increases in elderly, diabetic, and wounded warrior amputee driving populations. In this exploratory study, phone interviews were conducted with 20 DRSs, 20 dealers/installers, and 20 users regarding their perspectives about HC training, maintenance and operation, and design improvements. Results revealed common views and differences in perspectives about whether HC users should receive training and for how long, when and how often users should receive maintenance on their HCs, and what DRSs, dealers/installers, and users would like to see in the future.

Examining the Effects of Video Modeling and Prompts to Teach Activities of Daily Living Skills.

PubMed

Aldi, Catarina; Crigler, Alexandra; Kates-McElrath, Kelly; Long, Brian; Smith, Hillary; Rehak, Kim; Wilkinson, Lisa

2016-12-01

Video modeling has been shown to be effective in teaching a number of skills to learners diagnosed with autism spectrum disorders (ASD). In this study, we taught two young men diagnosed with ASD three different activities of daily living skills (ADLS) using point-of-view video modeling. Results indicated that both participants met criterion for all ADLS. Participants did not maintain mastery criterion at a 1-month follow-up, but did score above baseline at maintenance with and without video modeling. • Point-of-view video models may be an effective intervention to teach daily living skills. • Video modeling with handheld portable devices (Apple iPod or iPad) can be just as effective as video modeling with stationary viewing devices (television or computer). • The use of handheld portable devices (Apple iPod and iPad) makes video modeling accessible and possible in a wide variety of environments.

Seeing faces is necessary for face-domain formation.

PubMed

Arcaro, Michael J; Schade, Peter F; Vincent, Justin L; Ponce, Carlos R; Livingstone, Margaret S

2017-10-01

Here we report that monkeys raised without exposure to faces did not develop face domains, but did develop domains for other categories and did show normal retinotopic organization, indicating that early face deprivation leads to a highly selective cortical processing deficit. Therefore, experience must be necessary for the formation (or maintenance) of face domains. Gaze tracking revealed that control monkeys looked preferentially at faces, even at ages prior to the emergence of face domains, but face-deprived monkeys did not, indicating that face looking is not innate. A retinotopic organization is present throughout the visual system at birth, so selective early viewing behavior could bias category-specific visual responses toward particular retinotopic representations, thereby leading to domain formation in stereotyped locations in inferotemporal cortex, without requiring category-specific templates or biases. Thus, we propose that environmental importance influences viewing behavior, viewing behavior drives neuronal activity, and neuronal activity sculpts domain formation.

Seeing faces is necessary for face-patch formation

PubMed Central

Arcaro, Michael J.; Schade, Peter F.; Vincent, Justin L.; Ponce, Carlos R.; Livingstone, Margaret S.

2017-01-01

Here we report that monkeys raised without exposure to faces did not develop face patches, but did develop domains for other categories, and did show normal retinotopic organization, indicating that early face deprivation leads to a highly selective cortical processing deficit. Therefore experience must be necessary for the formation, or maintenance, of face domains. Gaze tracking revealed that control monkeys looked preferentially at faces, even at ages prior to the emergence of face patches, but face-deprived monkeys did not, indicating that face looking is not innate. A retinotopic organization is present throughout the visual system at birth, so selective early viewing behavior could bias category-specific visual responses towards particular retinotopic representations, thereby leading to domain formation in stereotyped locations in IT, without requiring category-specific templates or biases. Thus we propose that environmental importance influences viewing behavior, viewing behavior drives neuronal activity, and neuronal activity sculpts domain formation. PMID:28869581

'Crisis' and 'everyday' initiators: A qualitative study of coercion and agency in the context of methadone maintenance treatment initiation.

PubMed

Damon, Will; Small, Will; Anderson, Solanna; Maher, Lisa; Wood, Evan; Kerr, Thomas; McNeil, Ryan

2017-03-01

Patient attrition is common among people enrolled in methadone maintenance treatment (MMT) programs and most pronounced during the first year of treatment. However, the experiences of patients initiating MMT have been overlooked in the literature. This study explores experiences of MMT initiation among MMT patients, focusing on contextual influences on MMT initiation and perceptions of MMT and their subsequent influence on treatment retention. Semi-structured qualitative interviews were conducted with 39 MMT patients in Vancouver, Canada. Individuals reporting enrolment in MMT were recruited from within two ongoing cohort studies comprised of people who use drugs. Interview transcripts were analysed using an inductive and iterative approach. Two groups of MMT initiators were identified: (i) 'crisis initiators' prescribed methadone following critical transition events, such as incarceration or pregnancy; and (ii) 'everyday initiators' enrolled in MMT as part of routine healthcare utilisation. While most 'crisis initiators' and some 'everyday initiators' described experiencing coercion during MMT initiation, 'crisis initiators' were further subjected to the coercive leveraging of their vulnerability to motivate 'consent' for MMT. 'Crisis initiators' developed negative views towards MMT and were more likely to discontinue treatment. Long-standing patient-provider relationships and open dialogue were associated with more positive views regarding MMT, regardless of the circumstances of initiation. Findings underscore the need for clear and effective communication regarding treatment regimens and expectations during MMT initiation. Furthermore, training in trauma-informed care may help reduce perceptions of coercion and rates of early treatment termination. [Damon W, Small W, Anderson S, Maher L, Wood E, Kerr T, McNeil R. Crisis' and 'everyday' initiators: A qualitative study of coercion and agency in the context of methadone maintenance treatment initiation. Drug Alcohol Rev 2017;36:253-260]. © 2016 Australasian Professional Society on Alcohol and other Drugs.

Unisys' experience in software quality and productivity management of an existing system

NASA Technical Reports Server (NTRS)

Munson, John B.

1988-01-01

A summary of Quality Improvement techniques, implementation, and results in the maintenance, management, and modification of large software systems for the Space Shuttle Program's ground-based systems is provided.

76 FR 41769 - Information Collection; Submission for OMB Review, Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-15

... techniques or other forms of information technology, e.g., permitting electronic submissions of responses.../maintenance): None. Dated: July 11, 2011. Maggie Taylor-Coates, Chief, Trust Operations Branch. [FR Doc. 2011...

Planning for Cost Effectiveness.

ERIC Educational Resources Information Center

Schlaebitz, William D.

1984-01-01

A heat pump life-cycle cost analysis is used to explain the technique. Items suggested for the life-cycle analysis approach include lighting, longer-life batteries, site maintenance, and retaining experts to inspect specific building components. (MLF)

Practical Use of Operation Data in the Process Industry

NASA Astrophysics Data System (ADS)

Kano, Manabu

This paper aims to reveal real problems in the process industry and introduce recent development to solve such problems from the viewpoint of effective use of operation data. Two topics are discussed: virtual sensor and process control. First, in order to clarify the present state and problems, a part of our recent questionnaire survey of process control is quoted. It is emphasized that maintenance is a key issue not only for soft-sensors but also for controllers. Then, new techniques are explained. The first one is correlation-based just-in-time modeling (CoJIT), which can realize higher prediction performance than conventional methods and simplify model maintenance. The second is extended fictitious reference iterative tuning (E-FRIT), which can realize data-driven PID control parameter tuning without process modeling. The great usefulness of these techniques are demonstrated through their industrial applications.

Optimal Maintenance Works for the Aborshada Road in the Western Region of Libya

NASA Astrophysics Data System (ADS)

Youssef, Medhat Abdelrahman; Elbasher, Abdelbary Altayb

2014-09-01

In this research, the condition of a road pavement was investigated for the Aborshada Road in the Gharian region of Libya to determine the optimal maintenance works. Previously, a simple engineering judgment was the only procedure followed by the Gharian municipal engineers for evaluating pavements and prioritizing maintenance. The surface condition of the Aborshada Road pavement was investigated using "the Pavement Condition Index (PCI)" visual technique. The pavement was inspected to survey the different distresses in each sample unit. Ninteen pavement distresses were classified according to the PCI standards (PCI for roads and parking lots became an ASTM standard in 2007 (D6433-07)). It was necessary to know the most common distresses of the Aborshada Road to provide assistance for the decision maker in his evaluation of the pavement and the optimum repair method to be selected. This study reveals the actual performance of the pavements and suggests the research required for dealing with the pavement maintenance problem in Libya, especially in the western region. The best maintenance alternative for Aborshada Road was Case No. 3 (Potholes, Long. & Trans. Cracking and Alligator Crack Maintenance). Also, the most common pavement distresses on the Aborshada Road were Distress Nos. 1, 3, 6, 7, 10 and 13 according to the ASTM - D6433-07 classification

Knowledge-based approaches to the maintenance of a large controlled medical terminology.

PubMed Central

Cimino, J J; Clayton, P D; Hripcsak, G; Johnson, S B

1994-01-01

OBJECTIVE: Develop a knowledge-based representation for a controlled terminology of clinical information to facilitate creation, maintenance, and use of the terminology. DESIGN: The Medical Entities Dictionary (MED) is a semantic network, based on the Unified Medical Language System (UMLS), with a directed acyclic graph to represent multiple hierarchies. Terms from four hospital systems (laboratory, electrocardiography, medical records coding, and pharmacy) were added as nodes in the network. Additional knowledge about terms, added as semantic links, was used to assist in integration, harmonization, and automated classification of disparate terminologies. RESULTS: The MED contains 32,767 terms and is in active clinical use. Automated classification was successfully applied to terms for laboratory specimens, laboratory tests, and medications. One benefit of the approach has been the automated inclusion of medications into multiple pharmacologic and allergenic classes that were not present in the pharmacy system. Another benefit has been the reduction of maintenance efforts by 90%. CONCLUSION: The MED is a hybrid of terminology and knowledge. It provides domain coverage, synonymy, consistency of views, explicit relationships, and multiple classification while preventing redundancy, ambiguity (homonymy) and misclassification. PMID:7719786

PACS: acceptance test, quality control, warranty, and maintenance continuum

NASA Astrophysics Data System (ADS)

Romlein, John R.; Norton, Gary S.; Lyche, David K.; Richardson, Ronald R., Jr.

1999-07-01

As PACS gain greater acceptance and use in medical facilities the question of life cycle management must be addressed in terms that relate to the common business practices for medical information system and medical devices. The issues in life cycle management of such a system are relatively new to the industry. Increased use of PACS within the medical community requires that standardized life cycle management practices by developed and implemented. This paper develops a new of life cycle issues as cyclic and related events that are not only manageable, but also predictable in terms, of, frequency, duration data content, data exchange, potential outcomes, staffing requirement, documentation, and staff interaction. This view is presented as a continuum that begins at the acceptance testing of a PACS and continues throughout its life cycle. The continuum incorporates the required relationship between quality control testing and maintenance actions during warranty period and the maintenance years. Interrelated cyclic events are described that bind these processes together and provide a basis for long-term proactive management of PACS in a medical environment.

Randomized controlled trial of video self-modeling following speech restructuring treatment for stuttering.

PubMed

Cream, Angela; O'Brian, Sue; Jones, Mark; Block, Susan; Harrison, Elisabeth; Lincoln, Michelle; Hewat, Sally; Packman, Ann; Menzies, Ross; Onslow, Mark

2010-08-01

In this study, the authors investigated the efficacy of video self-modeling (VSM) following speech restructuring treatment to improve the maintenance of treatment effects. The design was an open-plan, parallel-group, randomized controlled trial. Participants were 89 adults and adolescents who undertook intensive speech restructuring treatment. Post treatment, participants were randomly assigned to 2 trial arms: standard maintenance and standard maintenance plus VSM. Participants in the latter arm viewed stutter-free videos of themselves each day for 1 month. The addition of VSM did not improve speech outcomes, as measured by percent syllables stuttered, at either 1 or 6 months postrandomization. However, at the latter assessment, self-rating of worst stuttering severity by the VSM group was 10% better than that of the control group, and satisfaction with speech fluency was 20% better. Quality of life was also better for the VSM group, which was mildly to moderately impaired compared with moderate impairment in the control group. VSM intervention after treatment was associated with improvements in self-reported outcomes. The clinical implications of this finding are discussed.

Recent advances in automatic alignment system for the National Ignition Facility

NASA Astrophysics Data System (ADS)

Wilhelmsen, Karl; Awwal, Abdul A. S.; Kalantar, Dan; Leach, Richard; Lowe-Webb, Roger; McGuigan, David; Miller Kamm, Vicki

2011-03-01

The automatic alignment system for the National Ignition Facility (NIF) is a large-scale parallel system that directs all 192 laser beams along the 300-m optical path to a 50-micron focus at target chamber in less than 50 minutes. The system automatically commands 9,000 stepping motors to adjust mirrors and other optics based upon images acquired from high-resolution digital cameras viewing beams at various locations. Forty-five control loops per beamline request image processing services running on a LINUX cluster to analyze these images of the beams and references, and automatically steer the beams toward the target. This paper discusses the upgrades to the NIF automatic alignment system to handle new alignment needs and evolving requirements as related to various types of experiments performed. As NIF becomes a continuously-operated system and more experiments are performed, performance monitoring is increasingly important for maintenance and commissioning work. Data, collected during operations, is analyzed for tuning of the laser and targeting maintenance work. Handling evolving alignment and maintenance needs is expected for the planned 30-year operational life of NIF.

A new trick to a routine procedure: taking the fear out of the axillary vein stick using the 35° caudal view.

PubMed

Yang, Felix; Kulbak, Guy

2015-07-01

The axillary vein is frequently used to implant pacemaker and defibrillator leads. We describe a technique utilizing the caudal fluoroscopic view to facilitate axillary venous access without contrast. Outcomes of device implants or upgrades utilizing this technique were examined during a 1-year period at our institution. Of 229 consecutive implants, only 9 patients required an alternate technique for lead implantation. There were zero cases of pneumothorax. The caudal view allows for optimal appreciation of the anterior border of the lung and the first rib. This simple technique increases the implanter's appreciation of and control over the access needle depth relative to the lung and first rib, thereby reducing pneumothorax risk. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2015. For permissions please email: journals.permissions@oup.com.

Anatomical principles for minimally invasive reconstruction of the acromioclavicular joint with anchors.

PubMed

Xiong, Chuanzhi; Lu, Yaojia; Wang, Qiang; Chen, Gang; Hu, Hansheng; Lu, Zhihua

2016-11-01

The aim of this study was to evaluate the outcome of a minimally invasive surgical technique for the treatment of patients with acromioclavicular joint dislocation. Sixteen patients with complete acromioclavicular joint dislocation were enrolled in this study. All patients were asked to follow the less active rehabilitation protocol post-operatively. Computed tomography with 3-D reconstruction of the injured shoulder was performed on each patient post operatively for the assessment of the accuracy of the suture anchor placement in the coracoid process and the reduction of the acromioclavicular joint. Radiographs of Zanca view and axillary view of both shoulders were taken for evaluating the maintenance of the acromioclavicular joint reduction at each follow-up visit. The Constant shoulder score was used for function assessment at the final follow-up. Twenty seven of the 32 anchors implanted in the coracoid process met the criteria of good position. One patient developed complete loss of reduction and another had partial loss of reduction in the anteroposterior plane. For the other 14 patients, the mean Constant score was 90 (range, 82-95). For the patients with partial and complete loss of reduction, the Constant score were 92 and 76 respectively. All of them got nearly normal range of motion of the shoulders and restored to pre-operative life and works. With this minimally invasive approach and limited exposure of the coracoid, a surgeon can place the suture anchors at the anatomical insertions of the coracoclavicular ligament and allow the dislocated joint reduced and maintained well. Level IV, Case series; therapeutic study.

Students' Views about Disease Concept: Drawing and Writing Technique

ERIC Educational Resources Information Center

Isik, Ebru; Çetin, Gülcan; Özarslan, Murat

2017-01-01

This study was aimed to determine ninth grade students' views about disease concept by a drawing and writing technique. Participants consisted of 81 ninth grade students in a Technical and Industrial Vocational School in Kocaeli, Turkey. The study was conducted in spring semester of 2009-2010 academic year after Health Concept Unit in Health…

Recommendations for a culturally relevant Internet-based tool to promote physical activity among overweight young African American women, Alabama, 2010-2011.

PubMed

Durant, Nefertiti H; Joseph, Rodney P; Cherrington, Andrea; Cuffee, Yendelela; Knight, BernNadette; Lewis, Dwight; Allison, Jeroan J

2014-01-16

Innovative approaches are needed to promote physical activity among young adult overweight and obese African American women. We sought to describe key elements that African American women desire in a culturally relevant Internet-based tool to promote physical activity among overweight and obese young adult African American women. A mixed-method approach combining nominal group technique and traditional focus groups was used to elicit recommendations for the development of an Internet-based physical activity promotion tool. Participants, ages 19 to 30 years, were enrolled in a major university. Nominal group technique sessions were conducted to identify themes viewed as key features for inclusion in a culturally relevant Internet-based tool. Confirmatory focus groups were conducted to verify and elicit more in-depth information on the themes. Twenty-nine women participated in nominal group (n = 13) and traditional focus group sessions (n = 16). Features that emerged to be included in a culturally relevant Internet-based physical activity promotion tool were personalized website pages, diverse body images on websites and in videos, motivational stories about physical activity and women similar to themselves in size and body shape, tips on hair care maintenance during physical activity, and online social support through social media (eg, Facebook, Twitter). Incorporating existing social media tools and motivational stories from young adult African American women in Internet-based tools may increase the feasibility, acceptability, and success of Internet-based physical activity programs in this high-risk, understudied population.

Increased horizontal viewing zone angle of a hologram by resolution redistribution of a spatial light modulator.

PubMed

Takaki, Yasuhiro; Hayashi, Yuki

2008-07-01

The narrow viewing zone angle is one of the problems associated with electronic holography. We propose a technique that enables the ratio of horizontal and vertical resolutions of a spatial light modulator (SLM) to be altered. This technique increases the horizontal resolution of a SLM several times, so that the horizontal viewing zone angle is also increased several times. A SLM illuminated by a slanted point light source array is imaged by a 4f imaging system in which a horizontal slit is located on the Fourier plane. We show that the horizontal resolution was increased four times and that the horizontal viewing zone angle was increased approximately four times.

Managing aging in nuclear power plants: Insights from NRC maintenance team inspection reports

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fresco, A.; Subudhi, M.; Gunther, W.

1993-12-01

A plant`s maintenance program is the principal vehicle through which age-related degradation is managed. From 1988 to 1991, the NRC evaluated the maintenance program of every nuclear power plant in the United States. Forty-four out of a total of 67 of the reports issued on these in-depth team inspections were reviewed for insights into the strengths and weaknesses of the programs as related to the need to understand and manage the effects of aging on nuclear plant systems, structures, and components. Relevant information was extracted from these inspection reports and sorted into several categories, including Specific Aging Insights, Preventive Maintenance,more » Predictive Maintenance and Condition Monitoring, Post Maintenance Testing, Failure Trending, Root Cause Analysis and Usage of Probabilistic Risk Assessment in the Maintenance Process. Specific examples of inspection and monitoring techniques successfully used by utilities to detect degradation due to aging have been identified. The information also was sorted according to systems and components, including: Auxiliary Feedwater, Main Feedwater, High Pressure Injection for both BWRs and PWRs, Service Water, Instrument Air, and Emergency Diesel Generator Air Start Systems, and Emergency Diesel Generators Air Start Systems, emergency diesel generators, electrical components such as switchgear, breakers, relays, and motor control centers, motor operated valves and check valves. This information was compared to insights gained from the Nuclear Plant Aging Research (NPAR) Program. Attributes of plant maintenance programs where the NRC inspectors felt that improvement was needed to properly address the aging issue also are discussed.« less

Tools and Techniques for Evaluating the Effects of Maintenance Resource Management (MRM) in Air Safety

NASA Technical Reports Server (NTRS)

Taylor, James C.

2002-01-01

This research project was designed as part of a larger effort to help Human Factors (HF) implementers, and others in the aviation maintenance community, understand, evaluate, and validate the impact of Maintenance Resource Management (MRM) training programs, and other MRM interventions; on participant attitudes, opinions, behaviors, and ultimately on enhanced safety performance. It includes research and development of evaluation methodology as well as examination of psychological constructs and correlates of maintainer performance. In particular, during 2001, three issues were addressed. First a prototype process for measuring performance was developed and used. Second an automated calculator was developed to aid the HF implementer user in analyzing and evaluating local survey data. These results include being automatically compared with the experience from all MRM programs studied since 1991. Third the core survey (the Maintenance Resource Management Technical Operations Questionnaire, or 'MRM/TOQ') was further developed and tested to include topics of added relevance to the industry.

Using Facility Condition Assessments to Identify Actions Related to Infrastructure

NASA Technical Reports Server (NTRS)

Rubert, Kennedy F.

2010-01-01

To support cost effective, quality research it is essential that laboratory and testing facilities are maintained in a continuous and reliable state of availability at all times. NASA Langley Research Center (LaRC) and its maintenance contractor, Jacobs Technology, Inc. Research Operations, Maintenance, and Engineering (ROME) group, are in the process of implementing a combined Facility Condition Assessment (FCA) and Reliability Centered Maintenance (RCM) program to improve asset management and overall reliability of testing equipment in facilities such as wind tunnels. Specific areas are being identified for improvement, the deferred maintenance cost is being estimated, and priority is being assigned against facilities where conditions have been allowed to deteriorate. This assessment serves to assist in determining where to commit available funds on the Center. RCM methodologies are being reviewed and enhanced to assure that appropriate preventive, predictive, and facilities/equipment acceptance techniques are incorporated to prolong lifecycle availability and assure reliability at minimum cost. The results from the program have been favorable, better enabling LaRC to manage assets prudently.

Viewing zone duplication of multi-projection 3D display system using uniaxial crystal.

PubMed

Lee, Chang-Kun; Park, Soon-Gi; Moon, Seokil; Lee, Byoungho

2016-04-18

We propose a novel multiplexing technique for increasing the viewing zone of a multi-view based multi-projection 3D display system by employing double refraction in uniaxial crystal. When linearly polarized images from projector pass through the uniaxial crystal, two possible optical paths exist according to the polarization states of image. Therefore, the optical paths of the image could be changed, and the viewing zone is shifted in a lateral direction. The polarization modulation of the image from a single projection unit enables us to generate two viewing zones at different positions. For realizing full-color images at each viewing zone, a polarization-based temporal multiplexing technique is adopted with a conventional polarization switching device of liquid crystal (LC) display. Through experiments, a prototype of a ten-view multi-projection 3D display system presenting full-colored view images is implemented by combining five laser scanning projectors, an optically clear calcite (CaCO₃) crystal, and an LC polarization rotator. For each time sequence of temporal multiplexing, the luminance distribution of the proposed system is measured and analyzed.

On a High-Performance VLSI Solution to Database Problems.

DTIC Science & Technology

1981-08-01

offer such attractive features as automatic verification and. maintenance of semantic integrity, usage of views as abstraction and authorization...course, is the waste of too much potential resource. The global database may contain information for many different users and applications. In processing...working on, this may cause no damage at all, but some waste of space. Therefore one solution may be perhaps to do nothing to prevent its occurrence

A Data Warehouse to Support Condition Based Maintenance (CBM)

DTIC Science & Technology

2005-05-01

Application ( VBA ) code sequence to import the original MAST-generated CSV and then create a single output table in DBASE IV format. The DBASE IV format...database architecture (Oracle, Sybase, MS- SQL , etc). This design includes table definitions, comments, specification of table attributes, primary and foreign...built queries and applications. Needs the application developers to construct data views. No SQL programming experience. b. Power Database User - knows

Lightning Discharges to Aircraft and Associated Meteorological Conditions

NASA Technical Reports Server (NTRS)

Harrison, L P

1946-01-01

A summary is given of information on atmospheric electrical discharges to aircraft and associated meteorological conditions. Information is given that is designed to give a fairly comprehensive view of the underlying principles of meteorology and atmospheric electricity. Of special interest to pilots are lists of procedures of flight conduct and aircraft maintenance recommended foe avoiding or minimizing the hazards of disruptive electrical discharges and other severe conditions near thunderstorms.

The Relationship Between Naval Aviation Mishaps and Squadron Maintenance Safety Climate

DTIC Science & Technology

2006-12-01

automobile and personal safety. The Safety Department strives to ensure that safety is emphasized and is viewed by all squadron members as...Quessenberry & Boyer, 2004). These informal rules and personal values can influence the developed culture within a squadron, both positively and...management will lower morale and cause employees to get frustrated and pessimistic with the process in general. Reaction may also hold the person who

Eye gaze tracking reveals heightened attention to food in adults with binge eating when viewing images of real-world scenes.

PubMed

Popien, Avery; Frayn, Mallory; von Ranson, Kristin M; Sears, Christopher R

2015-08-01

Individuals with eating disorders often exhibit food-related biases in attention tasks. To assess the engagement and maintenance of attention to food in adults with binge eating, in the present study, eye gaze tracking was used to compare fixations to food among non-clinical adults with versus without binge eating while they viewed images of real-world scenes. Fifty-seven participants' eye fixations were tracked and recorded throughout 8-second presentations of scenes containing high-calorie and/or low-caloriefood items in various settings (restaurants, social gatherings, etc.). Participants with binge eating fixated on both high-calorie and low-calorie food items significantly more than controls, and this was the case when the high- and low-calorie food items were presented in the same image and in different images. Participants with binge eating also fixated on food items significantly earlier in the presentations. A time course analysis that divided each 8-second presentation into 2-second intervals revealed that participants with binge eating attended to food items more than control participants throughout the 8-second presentation. These results have implications for theory regarding the initiation and maintenance of binge eating. Copyright © 2015 Elsevier Ltd. All rights reserved.

Engineering Analysis of Stresses in Railroad Rails.

DOT National Transportation Integrated Search

1981-10-01

One portion of the Federal Railroad Administration's (FRA) Track Performance Improvement Program is the development of engineering and analytic techniques required for the design and maintenance of railroad track of increased integrity and safety. Un...

Preliminary Description of Stresses in Railroad Rail

DOT National Transportation Integrated Search

1976-11-01

One portion of the Federal Railroad Administration's (FRA) Track Performance Improvement Program is the development of engineering and analytic techniques required for the design and maintenance of railroad track of increased integrity and safety. Un...

Satellite Power System. Concept development and evaluation program, volume 6: Construction and operations

NASA Technical Reports Server (NTRS)

Benson, H.; Jenkins, L. M.

1981-01-01

The construction, operation, and maintenance requirements for a solar power satellite, including the space and ground systems, are reviewed. The basic construction guidelines are explained, and construction location options are discussed. The space construction tasks, equipment, and base configurations are discussed together with the operations required to place a solar power satellite in geosynchronous orbit. A rectenna construction technique is explained, and operation with the grid is defined. Maintenance requirements are summarized for the entire system. Key technology issues required for solar power satellite construction operations are defined.

Selecting materialized views using random algorithm

NASA Astrophysics Data System (ADS)

Zhou, Lijuan; Hao, Zhongxiao; Liu, Chi

2007-04-01

The data warehouse is a repository of information collected from multiple possibly heterogeneous autonomous distributed databases. The information stored at the data warehouse is in form of views referred to as materialized views. The selection of the materialized views is one of the most important decisions in designing a data warehouse. Materialized views are stored in the data warehouse for the purpose of efficiently implementing on-line analytical processing queries. The first issue for the user to consider is query response time. So in this paper, we develop algorithms to select a set of views to materialize in data warehouse in order to minimize the total view maintenance cost under the constraint of a given query response time. We call it query_cost view_ selection problem. First, cost graph and cost model of query_cost view_ selection problem are presented. Second, the methods for selecting materialized views by using random algorithms are presented. The genetic algorithm is applied to the materialized views selection problem. But with the development of genetic process, the legal solution produced become more and more difficult, so a lot of solutions are eliminated and producing time of the solutions is lengthened in genetic algorithm. Therefore, improved algorithm has been presented in this paper, which is the combination of simulated annealing algorithm and genetic algorithm for the purpose of solving the query cost view selection problem. Finally, in order to test the function and efficiency of our algorithms experiment simulation is adopted. The experiments show that the given methods can provide near-optimal solutions in limited time and works better in practical cases. Randomized algorithms will become invaluable tools for data warehouse evolution.

En face view of the mitral valve: definition and acquisition.

PubMed

Mahmood, Feroze; Warraich, Haider Javed; Shahul, Sajid; Qazi, Aisha; Swaminathan, Madhav; Mackensen, G Burkhard; Panzica, Peter; Maslow, Andrew

2012-10-01

A 3-dimensional echocardiographic view of the mitral valve, called the "en face" or "surgical view," presents a view of the mitral valve similar to that seen by the surgeon from a left atrial perspective. Although the anatomical landmarks of this view are well defined, no comprehensive echocardiographic definition has been presented. After reviewing the literature, we provide a definition of the left atrial and left ventricular en face views of the mitral valve. Techniques used to acquire this view are also discussed.

Mathematical Modelling of Liner Piston Maintenance Activity using Field Data to Minimize Overhauling Time and Human Energy Consumption

NASA Astrophysics Data System (ADS)

Belkhode, Pramod Namdeorao

2017-06-01

Field data based model is proposed to reduce the overhauling time and human energy consumed in liner piston maintenance activity so as to increase the productivity of liner piston maintenance activity. The independent variables affecting the phenomenon such as anthropometric parameters of workers (Eastman Kodak Co. Ltd in Section VIA Appendix-A: Anthropometric Data. Ergonomic Design for People at Work, Van Nostrans Reinhold, New York, 1), workers parameters, specification of liner piston data, specification of tools used in liner piston maintenance activity, specification of solvents, axial clearance of big end bearing and bolt elongation, workstation data (Eastman Kodak Co. Ltd in Work Place Ergonomic Design for People at Work, Van Nostrans Reinhold, New York, 2) and extraneous variables, namely, temperature, humidity at workplace, illumination at workplace and noise at workplace (Eastman Kodak Co. Ltd in Chapter V Environment Ergonomic Design for People at Work, Van Nostrans Reinhold, New York, 3) are taken into account. The model is formulated for dependent variables of liner piston maintenance activity to minimize the overhauling time and human energy consumption so as to improve the productivity of liner piston maintenance activity. The developed model can predict the performance of liner piston maintenance activity which involves man and machine system (Schenck in Theories of Engineering Experimentation, Mc-Graw Hill, New York 4). The model is then optimized by optimization technique and the sensitivity analysis of the model has also been estimated.

Research on gesture recognition of augmented reality maintenance guiding system based on improved SVM

NASA Astrophysics Data System (ADS)

Zhao, Shouwei; Zhang, Yong; Zhou, Bin; Ma, Dongxi

2014-09-01

Interaction is one of the key techniques of augmented reality (AR) maintenance guiding system. Because of the complexity of the maintenance guiding system's image background and the high dimensionality of gesture characteristics, the whole process of gesture recognition can be divided into three stages which are gesture segmentation, gesture characteristic feature modeling and trick recognition. In segmentation stage, for solving the misrecognition of skin-like region, a segmentation algorithm combing background mode and skin color to preclude some skin-like regions is adopted. In gesture characteristic feature modeling of image attributes stage, plenty of characteristic features are analyzed and acquired, such as structure characteristics, Hu invariant moments features and Fourier descriptor. In trick recognition stage, a classifier based on Support Vector Machine (SVM) is introduced into the augmented reality maintenance guiding process. SVM is a novel learning method based on statistical learning theory, processing academic foundation and excellent learning ability, having a lot of issues in machine learning area and special advantages in dealing with small samples, non-linear pattern recognition at high dimension. The gesture recognition of augmented reality maintenance guiding system is realized by SVM after the granulation of all the characteristic features. The experimental results of the simulation of number gesture recognition and its application in augmented reality maintenance guiding system show that the real-time performance and robustness of gesture recognition of AR maintenance guiding system can be greatly enhanced by improved SVM.

Using decision-tree classifier systems to extract knowledge from databases

NASA Technical Reports Server (NTRS)

St.clair, D. C.; Sabharwal, C. L.; Hacke, Keith; Bond, W. E.

1990-01-01

One difficulty in applying artificial intelligence techniques to the solution of real world problems is that the development and maintenance of many AI systems, such as those used in diagnostics, require large amounts of human resources. At the same time, databases frequently exist which contain information about the process(es) of interest. Recently, efforts to reduce development and maintenance costs of AI systems have focused on using machine learning techniques to extract knowledge from existing databases. Research is described in the area of knowledge extraction using a class of machine learning techniques called decision-tree classifier systems. Results of this research suggest ways of performing knowledge extraction which may be applied in numerous situations. In addition, a measurement called the concept strength metric (CSM) is described which can be used to determine how well the resulting decision tree can differentiate between the concepts it has learned. The CSM can be used to determine whether or not additional knowledge needs to be extracted from the database. An experiment involving real world data is presented to illustrate the concepts described.

Dual-surface dielectric depth detector for holographic millimeter-wave security scanners

NASA Astrophysics Data System (ADS)

McMakin, Douglas L.; Keller, Paul E.; Sheen, David M.; Hall, Thomas E.

2009-05-01

The Transportation Security Administration (TSA) is presently deploying millimeter-wave whole body scanners at over 20 airports in the United States. Threats that may be concealed on a person are displayed to the security operator of this scanner. "Passenger privacy is ensured through the anonymity of the image. The officer attending the passenger cannot view the image, and the officer viewing the image is remotely located and cannot see the passenger. Additionally, the image cannot be stored, transmitted or printed and is deleted immediately after being viewed. Finally, the facial area of the image has been blurred to further ensure privacy." Pacific Northwest National Laboratory (PNNL) originated research into this novel security technology which has been independently commercialized by L-3 Communications, SafeView, Inc. PNNL continues to perform fundamental research into improved software techniques which are applicable to the field of holographic security screening technology. This includes performing significant research to remove human features from the imagery. Both physical and software imaging techniques have been employed. The physical imaging techniques include polarization diversity illumination and reception, dual frequency implementation, and high frequency imaging at 100 GHz. This paper will focus on a software privacy technique using a dual surface dielectric depth detector method.

Endosymbiont-dependent host reproduction maintains bacterial-fungal mutualism.

PubMed

Partida-Martinez, Laila P; Monajembashi, Shamci; Greulich, Karl-Otto; Hertweck, Christian

2007-05-01

Bacterial endosymbionts play essential roles for many organisms, and thus specialized mechanisms have evolved during evolution that guarantee the persistence of the symbiosis during or after host reproduction. The rice seedling blight fungus Rhizopus microsporus represents a unique example of a mutualistic life form in which a fungus harbors endobacteria (Burkholderia sp.) for the production of a phytotoxin. Here we report the unexpected observation that in the absence of endosymbionts, the host is not capable of vegetative reproduction. Formation of sporangia and spores is restored only upon reintroduction of endobacteria. To monitor this process, we succeeded in GFP labeling cultured endosymbionts. We also established a laserbeam transformation technique for the first controlled introduction of bacteria into fungi to observe their migration to the tips of the aseptate hyphae. The persistence of this fungal-bacterial mutualism through symbiont-dependent sporulation is intriguing from an evolutionary point of view and implies that the symbiont produces factors that are essential for the fungal life cycle. Reproduction of the host has become totally dependent on endofungal bacteria, which in return provide a highly potent toxin for defending the habitat and accessing nutrients from decaying plants. This scenario clearly highlights the significance for a controlled maintenance of this fungal-bacterial symbiotic relationship.

Teen CHAT: Development and Utilization of a Web-Based Intervention to Improve Physician Communication with Adolescents About Healthy Weight

PubMed Central

Bravender, Terrill; Tulsky, James A.; Farrell, David; Alexander, Stewart C.; Østbye, Truls; Lyna, Pauline; Dolor, Rowena J.; Coffman, Cynthia J.; Bilheimer, Alicia; Lin, Pao-Hwa; Pollak, Kathryn I.

2013-01-01

Objective To describe the theoretical basis, use, and satisfaction with Teen CHAT, an online educational intervention designed to improve physician-adolescent communication about healthy weight. Methods Routine health maintenance encounters between pediatricians and family practitioners and their overweight adolescent patients were audio recorded, and content was coded to summarize adherence with motivational interviewing techniques. An online educational intervention was developed using constructs from social cognitive theory and using personalized audio recordings. Physicians were randomized to the online intervention or not, and completed post-intervention surveys. Results Forty-six physicians were recruited, and 22 physicians were randomized to view the intervention website. The educational intervention took an average of 54 minutes to complete, and most physicians thought it was useful, that they would use newly acquired skills with their patients, and would recommend it to others. Fewer physicians thought it helped them address confidentiality issues with their adolescent patients. Conclusion The Teen CHAT online intervention shows potential for enhancing physician motivational interviewing skills in an acceptable and time-efficient manner. Practice Implications If found to be effective in enhancing motivational interviewing skills and changing adolescent weight-related behaviors, wide dissemination will be feasible and indicated. PMID:24021419

Mapping the maintenance stage of recovery: a qualitative study among treated and non-treated former alcohol dependents in Poland.

PubMed

Klingemann, Justyna Iwona

2012-01-01

The study provides an in-depth qualitative understanding of the maintenance stage when recovering from alcohol dependence with a focus on the broader social context of change of addictive behaviour. It explores the recovery as a subjective process within the abstinence-oriented Polish treatment system organized on the basis of the Minnesota model and is probes for group differences between treated and non-treated populations. The study is based on qualitative data from a media-recruited sample of 29 treated and non-treated former alcohol dependents (ICD-10) in Warsaw/Poland 2006/2007. They reported a recovery time of at least 2 years (M(recovery) = 11, SD = 9). In-depth, semi-structured interviews were analysed according to the problem-centred interview method using ATLAS.ti software. A wide range of maintenance strategies potentially contributing to the stabilization of recovery from alcohol dependence was identified. However, from the respondents' point of view, the change process is contingent upon the subjective weighing of specific maintenance factors and the importance attributed to their interplay. This includes time management as well as one's ability to invest available resources and strengths in shaping and pursuing personal goals. More commonalities than differences can be observed between groups during the maintenance stage, regardless of respondents' type of the pathway out of addiction. However, when confronting professional concepts of recovery with subjective accounts, only a subgroup conforms to the invasive, potentially normative definitions of recovery, while others do not link their recovery with identity transformation.

Using focus groups to identify factors affecting healthy weight maintenance in college men.

PubMed

Walsh, Jennifer R; White, Adrienne A; Greaney, Mary L

2009-06-01

Healthful eating and physical activity are important for healthy weight maintenance. The hypothesis for this study was that college-aged men would perceive factors affecting eating and physical activity as both contributing to and inhibiting healthy weight maintenance. The overall objective was to explore how men view weight maintenance in the context of these aspects. Subjects (n = 47, mean age = 20.3 +/- 1.7 years) completed an online survey, including the 51-item Three-Factor Eating Questionnaire, and participated in 1 of 6 focus groups. Three face-to-face and 3 online synchronous groups were conducted using a 15-question discussion guide to identify weight maintenance issues around eating, physical activity, and body perceptions. Weight satisfaction decreased with increase in both dietary restraint and disinhibition. Number of attempts to lose weight was positively associated with BMI (r [44] = .465, P = .01) and dietary restraint (r [44] = .515, P = .01). Findings from both focus group formats were similar. Motivators (sports performance/fitness, self-esteem, attractiveness, long-term health) were similar for eating healthfully and being physically active; however, more motivators to be physically active than to eat healthfully emerged. Enablers for eating healthfully included liking the taste, availability of healthful foods, using food rules to guide intake, having a habit of healthful eating, and internal drive/will. Barriers to healthful eating included fat in dairy foods, fruit and vegetable taste, and quick spoilage. Barriers to being physically active included lack of time/time management, obligations, being lazy, and girlfriends. Results may be used to inform future obesity prevention interventions.

OXC management and control system architecture with scalability, maintenance, and distributed managing environment

NASA Astrophysics Data System (ADS)

Park, Soomyung; Joo, Seong-Soon; Yae, Byung-Ho; Lee, Jong-Hyun

2002-07-01

In this paper, we present the Optical Cross-Connect (OXC) Management Control System Architecture, which has the scalability and robust maintenance and provides the distributed managing environment in the optical transport network. The OXC system we are developing, which is divided into the hardware and the internal and external software for the OXC system, is made up the OXC subsystem with the Optical Transport Network (OTN) sub layers-hardware and the optical switch control system, the signaling control protocol subsystem performing the User-to-Network Interface (UNI) and Network-to-Network Interface (NNI) signaling control, the Operation Administration Maintenance & Provisioning (OAM&P) subsystem, and the network management subsystem. And the OXC management control system has the features that can support the flexible expansion of the optical transport network, provide the connectivity to heterogeneous external network elements, be added or deleted without interrupting OAM&P services, be remotely operated, provide the global view and detail information for network planner and operator, and have Common Object Request Broker Architecture (CORBA) based the open system architecture adding and deleting the intelligent service networking functions easily in future. To meet these considerations, we adopt the object oriented development method in the whole developing steps of the system analysis, design, and implementation to build the OXC management control system with the scalability, the maintenance, and the distributed managing environment. As a consequently, the componentification for the OXC operation management functions of each subsystem makes the robust maintenance, and increases code reusability. Also, the component based OXC management control system architecture will have the flexibility and scalability in nature.

Brain function predictors and outcome of weight loss and weight loss maintenance.

PubMed

Szabo-Reed, Amanda N; Breslin, Florence J; Lynch, Anthony M; Patrician, Trisha M; Martin, Laura E; Lepping, Rebecca J; Powell, Joshua N; Yeh, Hung-Wen Henry; Befort, Christie A; Sullivan, Debra; Gibson, Cheryl; Washburn, Richard; Donnelly, Joseph E; Savage, Cary R

2015-01-01

Obesity rates are associated with public health consequences and rising health care costs. Weight loss interventions, while effective, do not work for everyone, and weight regain is a significant problem. Eating behavior is influenced by a convergence of processes in the brain, including homeostatic factors and motivational processing that are important contributors to overeating. Initial neuroimaging studies have identified brain regions that respond differently to visual food cues in obese and healthy weight individuals that are positively correlated with reports of hunger in obese participants. While these findings provide mechanisms of overeating, many important questions remain. It is not known whether brain activation patterns change after weight loss, or if they change differentially based on amount of weight lost. Also, little is understood regarding biological processes that contribute to long-term weight maintenance. This study will use neuroimaging in participants while viewing food and non-food images. Functional Magnetic Resonance Imaging will take place before and after completion of a twelve-week weight loss intervention. Obese participants will be followed though a 6-month maintenance period. The study will address three aims: 1. Characterize brain activation underlying food motivation and impulsive behaviors in obese individuals. 2. Identify brain activation changes and predictors of weight loss. 3. Identify brain activation predictors of weight loss maintenance. Findings from this study will have implications for understanding mechanisms of obesity, weight loss, and weight maintenance. Results will be significant to public health and could lead to a better understanding of how differences in brain activation relate to obesity. Copyright © 2014 Elsevier Inc. All rights reserved.

Brain function predictors and outcome of weight loss and weight loss maintenance

PubMed Central

Szabo-Reed, Amanda N.; Breslin, Florence J.; Lynch, Anthony M.; Patrician, Trisha M.; Martin, Laura E.; Lepping, Rebecca J.; Powell, Joshua N.; Yeh, Hung-Wen (Henry); Befort, Christie A.; Sullivan, Debra; Gibson, Cheryl; Washburn, Richard; Donnelly, Joseph E.; Savage, Cary R.

2015-01-01

Obesity rates are associated with public health consequences and rising health care costs. Weight loss interventions, while effective, do not work for everyone, and weight regain is a significant problem. Eating behavior is influenced by a convergence of processes in the brain, including homeostatic factors and motivational processing that are important contributors to overeating. Initial neuroimaging studies have identified brain regions that respond differently to visual food cues in obese and healthy weight individuals that are positively correlated with reports of hunger in obese participants. While these findings provide mechanisms of overeating, many important questions remain. It is not known whether brain activation patterns change after weight loss, or if they change differentially based on amount of weight lost. Also, little is understood regarding biological processes that contribute to long-term weight maintenance. This study will use neuroimaging in participants while viewing food and non-food images. Functional Magnetic Resonance Imaging will take place before and after completion of a twelve-week weight loss intervention. Obese participants will be followed though a 6-month maintenance period. The study will address three aims: 1. Characterize brain activation underlying food motivation and impulsive behaviors in obese individuals. 2. Identify brain activation changes and predictors of weight loss. 3. Identify brain activation predictors of weight loss maintenance. Findings from this study will have implications for understanding mechanisms of obesity, weight loss, and weight maintenance. Results will be significant to public health and could lead to a better understanding of how differences in brain activation relate to obesity. PMID:25533729

I'm OK, You're (Not) OK: Teaching in a World of Relativism.

ERIC Educational Resources Information Center

Ryder, Phyllis Mentzell

1995-01-01

Examines three techniques to overcome relativism: (1) a hierarchical view, in which the socially constructed view is superior; (2) a belief that a true understanding of personal experience will lead to political awareness; and (3) an assertion that the socially constructed view is more ethical than other views. Argues that first two approaches are…

Exploration of video-based structural health monitoring techniques.

DOT National Transportation Integrated Search

2014-10-01

Structural health monitoring (SHM) has become a viable tool to provide owners with objective data for maintenance and repair. Traditionally, discrete contact sensors such as strain gages or accelerometers have been used : for SHM. However, distribute...

Carbon footprint estimator, phase II : volume II - technical appendices.

DOT National Transportation Integrated Search

2014-03-01

The GASCAP model was developed to provide a software tool for analysis of the life-cycle GHG : emissions associated with the construction and maintenance of transportation projects. This phase : of development included techniques for estimating emiss...

Carbon footprint estimator, phase II : volume I - GASCAP model.

DOT National Transportation Integrated Search

2014-03-01

The GASCAP model was developed to provide a software tool for analysis of the life-cycle GHG : emissions associated with the construction and maintenance of transportation projects. This phase : of development included techniques for estimating emiss...

Sustainable construction in remote cold regions.

DOT National Transportation Integrated Search

2015-12-01

The goal of this project was to identify sustainable construction techniques appropriate for remote and cold regions, some of which apply to : operations and maintenance as well. The vast body of literature regarding green construction in warm region...

SCADA alarms processing for wind turbine component failure detection

NASA Astrophysics Data System (ADS)

Gonzalez, E.; Reder, M.; Melero, J. J.

2016-09-01

Wind turbine failure and downtime can often compromise the profitability of a wind farm due to their high impact on the operation and maintenance (O&M) costs. Early detection of failures can facilitate the changeover from corrective maintenance towards a predictive approach. This paper presents a cost-effective methodology to combine various alarm analysis techniques, using data from the Supervisory Control and Data Acquisition (SCADA) system, in order to detect component failures. The approach categorises the alarms according to a reviewed taxonomy, turning overwhelming data into valuable information to assess component status. Then, different alarms analysis techniques are applied for two purposes: the evaluation of the SCADA alarm system capability to detect failures, and the investigation of the relation between components faults being followed by failure occurrences in others. Various case studies are presented and discussed. The study highlights the relationship between faulty behaviour in different components and between failures and adverse environmental conditions.

Mechanical systems readiness assessment and performance monitoring study

NASA Technical Reports Server (NTRS)

1972-01-01

The problem of mechanical devices which lack the real-time readiness assessment and performance monitoring capability required for future space missions is studied. The results of a test program to establish the feasibility of implementing structure borne acoustics, a nondestructive test technique, are described. The program included the monitoring of operational acoustic signatures of five separate mechanical components, each possessing distinct sound characteristics. Acoustic signatures were established for normal operation of each component. Critical failure modes were then inserted into the test components, and faulted acoustic signatures obtained. Predominant features of the sound signature were related back to operational events occurring within the components both for normal and failure mode operations. All of these steps can be automated. The structure borne acoustics technique lends itself to reducing checkout time, simplifying maintenance procedures, and reducing manual involvement in the checkout, operation, maintenance, and fault diagnosis of mechanical systems.

Compression for radiological images

NASA Astrophysics Data System (ADS)

Wilson, Dennis L.

1992-07-01

The viewing of radiological images has peculiarities that must be taken into account in the design of a compression technique. The images may be manipulated on a workstation to change the contrast, to change the center of the brightness levels that are viewed, and even to invert the images. Because of the possible consequences of losing information in a medical application, bit preserving compression is used for the images used for diagnosis. However, for archiving the images may be compressed to 10 of their original size. A compression technique based on the Discrete Cosine Transform (DCT) takes the viewing factors into account by compressing the changes in the local brightness levels. The compression technique is a variation of the CCITT JPEG compression that suppresses the blocking of the DCT except in areas of very high contrast.

Maintenance and expression of the S. cerevisiae mitochondrial genome--from genetics to evolution and systems biology.

PubMed

Lipinski, Kamil A; Kaniak-Golik, Aneta; Golik, Pawel

2010-01-01

As a legacy of their endosymbiotic eubacterial origin, mitochondria possess a residual genome, encoding only a few proteins and dependent on a variety of factors encoded by the nuclear genome for its maintenance and expression. As a facultative anaerobe with well understood genetics and molecular biology, Saccharomyces cerevisiae is the model system of choice for studying nucleo-mitochondrial genetic interactions. Maintenance of the mitochondrial genome is controlled by a set of nuclear-coded factors forming intricately interconnected circuits responsible for replication, recombination, repair and transmission to buds. Expression of the yeast mitochondrial genome is regulated mostly at the post-transcriptional level, and involves many general and gene-specific factors regulating splicing, RNA processing and stability and translation. A very interesting aspect of the yeast mitochondrial system is the relationship between genome maintenance and gene expression. Deletions of genes involved in many different aspects of mitochondrial gene expression, notably translation, result in an irreversible loss of functional mtDNA. The mitochondrial genetic system viewed from the systems biology perspective is therefore very fragile and lacks robustness compared to the remaining systems of the cell. This lack of robustness could be a legacy of the reductive evolution of the mitochondrial genome, but explanations involving selective advantages of increased evolvability have also been postulated. Copyright © 2009 Elsevier B.V. All rights reserved.

Effects of skylight polarization, cloudiness, and view angle on the detection of oil on water.

NASA Technical Reports Server (NTRS)

Millard, J. P.; Arvesen, J. C.

1971-01-01

Three passive radiometric techniques, which use the contrast of sunlight reflected and backscattered from oil and water in specific wavelength regions, have potential application for remote sensing of oil spills. These techniques consist of measuring (1) total radiance, (2) the polarization components (normal and parallel) of radiance, and (3) the difference between the normal and parallel components. In this paper, the best view directions for these techniques are evaluated, conclusions are drawn as to the most promising technique, and explanations are developed to describe why previous total-radiance measurements yielded highest contrast between oil and water under overcast skies. The technique based on measurement of only the normal polorization component appears to be the most promising. The differential technique should be further investigated because of its potential to reduce the component of backscattered light from below the surface of the water. Measurements should be made about 45 deg nadir view angle in the direction opposite the sun. Overcast sky conditions provide a higher intensity of skylight relative to clear sky conditions and a lower intensity of backscatter within the water relative to surface reflectance. These factors result in higher contrast between oil and water under overcast skies.

View generated database

NASA Technical Reports Server (NTRS)

Downward, James G.

1992-01-01

This document represents the final report for the View Generated Database (VGD) project, NAS7-1066. It documents the work done on the project up to the point at which all project work was terminated due to lack of project funds. The VGD was to provide the capability to accurately represent any real-world object or scene as a computer model. Such models include both an accurate spatial/geometric representation of surfaces of the object or scene, as well as any surface detail present on the object. Applications of such models are numerous, including acquisition and maintenance of work models for tele-autonomous systems, generation of accurate 3-D geometric/photometric models for various 3-D vision systems, and graphical models for realistic rendering of 3-D scenes via computer graphics.