Suit study - The impact of VMS in subsystem integration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hill, B.; Watts, R.

1992-02-01

One of the thrusts of the Wright Laboratory/FIVE-sponsored Subsystem Integration Technology (SUIT) study is to investigate the impact of emerging vehicle management system (VMS) concepts on subsystem integration. This paper summarizes the issues relating to VMS/subsystem integration as examined during the Northrop SUIT study. Projected future weapon system requirements are identified and their impact on VMS and subsystem design interpreted. Integrated VMS/subsystem control and management functions are proposed. A candidate system VMS architecture satisfying the aforementioned weapon system requirements and providing the identified control and management functions is proposed. This architecture is used, together with the environmental control system, asmore » an illustrative subsystem example, to address the risks associated with the design, development, procurement, integration and testing of integrated VMS/subsystem concepts. The conclusion is that the development process requires an airframer to adopt the role of subsystem integrator, the consequences of which are discussed. 2 refs.« less

X-wing fly-by-wire vehicle management system

NASA Technical Reports Server (NTRS)

Fischer, Jr., William C. (Inventor)

1990-01-01

A complete, computer based, vehicle management system (VMS) for X-Wing aircraft using digital fly-by-wire technology controlling many subsystems and providing functions beyond the classical aircraft flight control system. The vehicle management system receives input signals from a multiplicity of sensors and provides commands to a large number of actuators controlling many subsystems. The VMS includes--segregating flight critical and mission critical factors and providing a greater level of back-up or redundancy for the former; centralizing the computation of functions utilized by several subsystems (e.g. air data, rotor speed, etc.); integrating the control of the flight control functions, the compressor control, the rotor conversion control, vibration alleviation by higher harmonic control, engine power anticipation and self-test, all in the same flight control computer (FCC) hardware units. The VMS uses equivalent redundancy techniques to attain quadruple equivalency levels; includes alternate modes of operation and recovery means to back-up any functions which fail; and uses back-up control software for software redundancy.

Feasibility and concept study to convert the NASA/AMES vertical motion simulator to a helicopter simulator

NASA Technical Reports Server (NTRS)

Belsterling, C. A.; Chou, R. C.; Davies, E. G.; Tsui, K. C.

1978-01-01

The conceptual design for converting the vertical motion simulator (VMS) to a multi-purpose aircraft and helicopter simulator is presented. A unique, high performance four degrees of freedom (DOF) motion system was developed to permanently replace the present six DOF synergistic system. The new four DOF system has the following outstanding features: (1) will integrate with the two large VMS translational modes and their associated subsystems; (2) can be converted from helicopter to fixed-wing aircraft simulation through software changes only; (3) interfaces with an advanced cab/visual display system of large dimensions; (4) makes maximum use of proven techniques, convenient materials and off-the-shelf components; (5) will operate within the existing building envelope without modifications; (6) can be built within the specified weight limit and avoid compromising VMS performance; (7) provides maximum performance with a minimum of power consumption; (8) simple design minimizes coupling between motions and maximizes reliability; and (9) can be built within existing budgetary figures.

77 FR 70139 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-23

... species on the high seas in the Convention Area to carry and operate near real-time satellite-based... Commission as part of a vessel monitoring system (VMS) operated by the Commission (50 CFR 300.45). Under this...: National Oceanic and Atmospheric Administration (NOAA). Title: Vessel Monitoring System Requirements under...

Friendly Neighborhood Computer Project. Extension of the IBM NJE network to DEC VAX computers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raffenetti, R.C.; Bertoncini, P.J.; Engert, D.E.

1984-07-01

This manual is divided into six chapters. The first is an overview of the VAX NJE emulator system and describes what can be done with the VAX NJE emulator software. The second chapter describes the commands that users of the VAX systems will use. Each command description includes the format of the command, a list of valid options and parameters and their meanings, and several short examples of command use. The third chapter describes the commands and capabilities for sending general, sequential files from and to VAX VMS nodes. The fourth chapter describes how to transmit data to a VAXmore » from other computer systems on the network. The fifth chapter explains how to exchange electronic mail with IBM CMS users and with users of other VAX VMS systems connected by NJE communications. The sixth chapter describes operator procedures and the additional commands operators may use.« less

Library Automation Alternatives in 1996 and User Satisfaction Ratings of Library Users by Operating System.

ERIC Educational Resources Information Center

Cibbarelli, Pamela

1996-01-01

Examines library automation product introductions and conversions to new operating systems. Compares user satisfaction ratings of the following library software packages: DOS/Windows, UNIX, Macintosh, and DEC VAX/VMS. Software is rated according to documentation, service/support, training, product reliability, product capabilities, ease of use,…

50 CFR 648.10 - VMS and DAS requirements for vessel owners/operators.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 50 Wildlife and Fisheries 12 2013-10-01 2013-10-01 false VMS and DAS requirements for vessel owners/operators. 648.10 Section 648.10 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE FISHERIES OF THE NORTHEASTERN...

NJE; VAX-VMS IBM NJE network protocol emulator. [DEC VAX11/780; VAX-11 FORTRAN 77 (99%) and MACRO-11 (1%)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engert, D.E.; Raffenetti, C.

NJE is communications software developed to enable a VAX VMS system to participate as an end-node in a standard IBM network by emulating the Network Job Entry (NJE) protocol. NJE supports job networking for the operating systems used on most large IBM-compatible computers (e.g., VM/370, MVS with JES2 or JES3, SVS, MVT with ASP or HASP). Files received by the VAX can be printed or saved in user-selected disk files. Files sent to the network can be routed to any network node for printing, punching, or job submission, or to a VM/370 user's virtual reader. Files sent from the VAXmore » are queued and transmitted asynchronously. No changes are required to the IBM software.DEC VAX11/780; VAX-11 FORTRAN 77 (99%) and MACRO-11 (1%); VMS 2.5; VAX11/780 with DUP-11 UNIBUS interface and 9600 baud synchronous modem..« less

DARK Technology Transition Plan

DTIC Science & Technology

1990-04-01

or suspend/resume primitives , and bounded delays. Under the above circumstances, the extra language features, and the hidden system calls they... system , this implies that the mechanisms by which units interact - to synchronise , communicate, schedule one another, or alert one another - should be...the Kernel environment are: " The host system is a DEC VAX operating under VMS 5.0 (the specific host used at the SEI is a MicroVAX II operating under

50 CFR 622.9 - Vessel monitoring systems (VMSs).

Code of Federal Regulations, 2011 CFR

2011-10-01

... shrimp. An owner or operator of a vessel that has been issued a limited access endorsement for South Atlantic rock shrimp (until January 27, 2010) or a Commercial Vessel Permit for Rock Shrimp (South Atlantic... rock shrimp fishery on board when on a trip in the South Atlantic. An operating VMS includes an...

GEMPAK 5.1 - A GENERAL METEOROLOGICAL PACKAGE (VAX VMS VERSION)

NASA Technical Reports Server (NTRS)

Des, Jardins M. L.

1994-01-01

GEMPAK is a general meteorological software package developed at NASA/Goddard Space Flight Center. It includes programs to analyze and display surface, upper-air, and gridded data, including model output. There are very general programs to list, edit, and plot data on maps, to display profiles and time series, to draw and fill contours, to draw streamlines, to plot symbols for clouds, sky cover, and pressure tendency, and draw cross sections in the case of gridded data and sounding data. In addition, there are Barnes objective analysis programs to grid surface and upper-air data. The programs include the capabilities to derive meteorological parameters from those found in the dataset, to perform vertical interpolations of sounding data to different coordinate systems, and to compute an extensive set of gridded diagnostic quantities by specifying various nested combinations of scalars and vector arithmetic, algebraic, and differential operators. The GEMPAK 5.1 graphics/transformation subsystem, GEMPLT, provides device-independent graphics. GEMPLT also has the capability to display output in a variety of map projections or overlaid on satellite imagery. GEMPAK 5.1 is written in FORTRAN 77 and C-language and has been implemented on VAX computers under VMS and on computers running the UNIX operating system. During installation and normal use, this package occupies approximately 100Mb of hard disk space. The UNIX version of GEMPAK includes drivers for several graphic output systems including MIT's X Window System (X11,R4), Sun GKS, PostScript (color and monochrome), Silicon Graphics, and others. The VMS version of GEMPAK also includes drivers for several graphic output systems including PostScript (color and monochrome). The VMS version is delivered with the object code for the Transportable Applications Environment (TAE) program, version 4.1 which serves as a user interface. A color monitor is recommended for displaying maps on video display devices. Data for rendering regional maps is included with this package. The standard distribution medium for the UNIX version of GEMPAK 5.1 is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the VMS version of GEMPAK 5.1 is a 6250 BPI 9-track magnetic tape in DEC VAX BACKUP format. The VMS version is also available on a TK50 tape cartridge in DEC VAX BACKUP format. This program was developed in 1985. The current version, GEMPAK 5.1, was released in 1992. The package is delivered with source code. An extensive collection of subroutine libraries allows users to format data for use by GEMPAK, to develop new programs, and to enhance existing ones.

The Most Important Languages Today.

ERIC Educational Resources Information Center

Graduating Engineer, 1985

1985-01-01

Lists and describes seven languages (COBOL, FORTRAN, BASIC, PASCAL, C, ADA, and LISP), pointing out that familiarity with one or more will enhance employability. Also lists and describes four operating systems (MSDOS, UNIX, MVS, and VAXX/VMS), indicating that knowledge of these systems will further enhance employability or on-the-job performance.…

75 FR 43148 - Gulf of Mexico Fishery Management Council; Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-23

...; telephone: (813) 348-1630 x235. SUPPLEMENTARY INFORMATION: The Vessel Monitoring System Advisory Panel will meet to discuss operation, design, agency usage of vessel monitoring systems (VMS), and resulting data.... SUMMARY: The Gulf of Mexico Fishery Management Council will convene a meeting of the Vessel Monitoring...

75 FR 80469 - Gulf of Mexico Fishery Management Council; Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-22

... Management Council; telephone: (813) 348-1630 x235. SUPPLEMENTARY INFORMATION: The Vessel Monitoring System (VMS) Advisory Panel will meet to discuss operation, design, usage of vessel monitoring systems, and.... SUMMARY: The Gulf of Mexico Fishery Management Council will convene a meeting of the Vessel Monitoring...

Vertical motion simulator familiarization guide

NASA Technical Reports Server (NTRS)

Danek, George L.

1993-01-01

The Vertical Motion Simulator Familiarization Guide provides a synoptic description of the Vertical Motion Simulator (VMS) and descriptions of the various simulation components and systems. The intended audience is the community of scientists and engineers who employ the VMS for research and development. The concept of a research simulator system is introduced and the building block nature of the VMS is emphasized. Individual sections describe all the hardware elements in terms of general properties and capabilities. Also included are an example of a typical VMS simulation which graphically illustrates the composition of the system and shows the signal flow among the elements and a glossary of specialized terms, abbreviations, and acronyms.

50 CFR 300.116 - Requirements for a vessel monitoring system for U.S. vessels.

Code of Federal Regulations, 2010 CFR

2010-10-01

... system for U.S. vessels. 300.116 Section 300.116 Wildlife and Fisheries INTERNATIONAL FISHING AND RELATED... vessel monitoring system for U.S. vessels. (a) Requirement for use. Within 30 days after NMFS publishes... for AMLR must ensure that such vessel has a NMFS-approved, operating VMS on board when on any fishing...

50 CFR 300.116 - Requirements for a vessel monitoring system for U.S. vessels.

Code of Federal Regulations, 2013 CFR

2013-10-01

... system for U.S. vessels. 300.116 Section 300.116 Wildlife and Fisheries INTERNATIONAL FISHING AND RELATED... vessel monitoring system for U.S. vessels. (a) Requirement for use. Within 30 days after NMFS publishes... for AMLR must ensure that such vessel has a NMFS-approved, operating VMS on board when on any fishing...

50 CFR 300.116 - Requirements for a vessel monitoring system for U.S. vessels.

Code of Federal Regulations, 2011 CFR

2011-10-01

... system for U.S. vessels. 300.116 Section 300.116 Wildlife and Fisheries INTERNATIONAL FISHING AND RELATED... vessel monitoring system for U.S. vessels. (a) Requirement for use. Within 30 days after NMFS publishes... for AMLR must ensure that such vessel has a NMFS-approved, operating VMS on board when on any fishing...

50 CFR 300.116 - Requirements for a vessel monitoring system for U.S. vessels.

Code of Federal Regulations, 2014 CFR

2014-10-01

... system for U.S. vessels. 300.116 Section 300.116 Wildlife and Fisheries INTERNATIONAL FISHING AND RELATED... vessel monitoring system for U.S. vessels. (a) Requirement for use. Within 30 days after NMFS publishes... for AMLR must ensure that such vessel has a NMFS-approved, operating VMS on board when on any fishing...

50 CFR 300.116 - Requirements for a vessel monitoring system for U.S. vessels.

Code of Federal Regulations, 2012 CFR

2012-10-01

... system for U.S. vessels. 300.116 Section 300.116 Wildlife and Fisheries INTERNATIONAL FISHING AND RELATED... vessel monitoring system for U.S. vessels. (a) Requirement for use. Within 30 days after NMFS publishes... for AMLR must ensure that such vessel has a NMFS-approved, operating VMS on board when on any fishing...

Simulation system architecture design for generic communications link

NASA Technical Reports Server (NTRS)

Tsang, Chit-Sang; Ratliff, Jim

1986-01-01

This paper addresses a computer simulation system architecture design for generic digital communications systems. It addresses the issues of an overall system architecture in order to achieve a user-friendly, efficient, and yet easily implementable simulation system. The system block diagram and its individual functional components are described in detail. Software implementation is discussed with the VAX/VMS operating system used as a target environment.

Economic analysis of cloud-based desktop virtualization implementation at a hospital

PubMed Central

2012-01-01

Background Cloud-based desktop virtualization infrastructure (VDI) is known as providing simplified management of application and desktop, efficient management of physical resources, and rapid service deployment, as well as connection to the computer environment at anytime, anywhere with anydevice. However, the economic validity of investing in the adoption of the system at a hospital has not been established. Methods This study computed the actual investment cost of the hospital-wide VDI implementation at the 910-bed Seoul National University Bundang Hospital in Korea and the resulting effects (i.e., reductions in PC errors and difficulties, application and operating system update time, and account management time). Return on investment (ROI), net present value (NPV), and internal rate of return (IRR) indexes used for corporate investment decision-making were used for the economic analysis of VDI implementation. Results The results of five-year cost-benefit analysis given for 400 Virtual Machines (VMs; i.e., 1,100 users in the case of SNUBH) showed that the break-even point was reached in the fourth year of the investment. At that point, the ROI was 122.6%, the NPV was approximately US$192,000, and the IRR showed an investment validity of 10.8%. From our sensitivity analysis to changing the number of VMs (in terms of number of users), the greater the number of adopted VMs was the more investable the system was. Conclusions This study confirms that the emerging VDI can have an economic impact on hospital information system (HIS) operation and utilization in a tertiary hospital setting. PMID:23110661

Economic analysis of cloud-based desktop virtualization implementation at a hospital.

PubMed

Yoo, Sooyoung; Kim, Seok; Kim, Taeki; Baek, Rong-Min; Suh, Chang Suk; Chung, Chin Youb; Hwang, Hee

2012-10-30

Cloud-based desktop virtualization infrastructure (VDI) is known as providing simplified management of application and desktop, efficient management of physical resources, and rapid service deployment, as well as connection to the computer environment at anytime, anywhere with any device. However, the economic validity of investing in the adoption of the system at a hospital has not been established. This study computed the actual investment cost of the hospital-wide VDI implementation at the 910-bed Seoul National University Bundang Hospital in Korea and the resulting effects (i.e., reductions in PC errors and difficulties, application and operating system update time, and account management time). Return on investment (ROI), net present value (NPV), and internal rate of return (IRR) indexes used for corporate investment decision-making were used for the economic analysis of VDI implementation. The results of five-year cost-benefit analysis given for 400 Virtual Machines (VMs; i.e., 1,100 users in the case of SNUBH) showed that the break-even point was reached in the fourth year of the investment. At that point, the ROI was 122.6%, the NPV was approximately US$192,000, and the IRR showed an investment validity of 10.8%. From our sensitivity analysis to changing the number of VMs (in terms of number of users), the greater the number of adopted VMs was the more investable the system was. This study confirms that the emerging VDI can have an economic impact on hospital information system (HIS) operation and utilization in a tertiary hospital setting.

GEMPAK 5.1 - A GENERAL METEOROLOGICAL PACKAGE (UNIX VERSION)

NASA Technical Reports Server (NTRS)

Desjardins, M. L.

1994-01-01

GEMPAK is a general meteorological software package developed at NASA/Goddard Space Flight Center. It includes programs to analyze and display surface, upper-air, and gridded data, including model output. There are very general programs to list, edit, and plot data on maps, to display profiles and time series, to draw and fill contours, to draw streamlines, to plot symbols for clouds, sky cover, and pressure tendency, and draw cross sections in the case of gridded data and sounding data. In addition, there are Barnes objective analysis programs to grid surface and upper-air data. The programs include the capabilities to derive meteorological parameters from those found in the dataset, to perform vertical interpolations of sounding data to different coordinate systems, and to compute an extensive set of gridded diagnostic quantities by specifying various nested combinations of scalars and vector arithmetic, algebraic, and differential operators. The GEMPAK 5.1 graphics/transformation subsystem, GEMPLT, provides device-independent graphics. GEMPLT also has the capability to display output in a variety of map projections or overlaid on satellite imagery. GEMPAK 5.1 is written in FORTRAN 77 and C-language and has been implemented on VAX computers under VMS and on computers running the UNIX operating system. During installation and normal use, this package occupies approximately 100Mb of hard disk space. The UNIX version of GEMPAK includes drivers for several graphic output systems including MIT's X Window System (X11,R4), Sun GKS, PostScript (color and monochrome), Silicon Graphics, and others. The VMS version of GEMPAK also includes drivers for several graphic output systems including PostScript (color and monochrome). The VMS version is delivered with the object code for the Transportable Applications Environment (TAE) program, version 4.1 which serves as a user interface. A color monitor is recommended for displaying maps on video display devices. Data for rendering regional maps is included with this package. The standard distribution medium for the UNIX version of GEMPAK 5.1 is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the VMS version of GEMPAK 5.1 is a 6250 BPI 9-track magnetic tape in DEC VAX BACKUP format. The VMS version is also available on a TK50 tape cartridge in DEC VAX BACKUP format. This program was developed in 1985. The current version, GEMPAK 5.1, was released in 1992. The package is delivered with source code. An extensive collection of subroutine libraries allows users to format data for use by GEMPAK, to develop new programs, and to enhance existing ones.

Hybrid Applications Of Artificial Intelligence

NASA Technical Reports Server (NTRS)

Borchardt, Gary C.

1988-01-01

STAR, Simple Tool for Automated Reasoning, is interactive, interpreted programming language for development and operation of artificial-intelligence application systems. Couples symbolic processing with compiled-language functions and data structures. Written in C language and currently available in UNIX version (NPO-16832), and VMS version (NPO-16965).

Is heart rate variability associated with frequency and intensity of vasomotor symptoms among healthy perimenopausal and postmenopausal women?

PubMed

Jones, Salene M W; Guthrie, Katherine A; LaCroix, Andrea Z; Sternfeld, Barbara; Landis, Carol A; Reed, Susan D; Dunn, Andrea; Caan, Bette; Cohen, Lee S; Hunt, Julie; Newton, Katherine M

2016-02-01

Research has suggested that the autonomic nervous system (ANS) is involved in the experience of vasomotor symptoms (VMS) during menopause. We examined the relationship of VMS intensity and heart rate variability (HRV), a measure of ANS function. Women (n = 282) were recruited from three American states for a clinical trial of yoga, exercise, and omega-3 fatty acid supplements for VMS. To be eligible, women had to report at least 14 VMS per week, with some being moderate to severe. Sitting electrocardiograms were recorded for 15 min using Holter monitors at both baseline and 12-week follow-up. Time and frequency domain HRV measures were calculated. Women completed daily diary measures of VMS frequency and intensity for 2 weeks at baseline and for 1 week at the follow-up assessment 12 weeks later. Multivariable linear regression was used to assess the relationship between VMS and baseline HRV measures and to compare change in HRV with change in VMS over the 12 weeks. Baseline HRV was not associated with either VMS frequency or intensity at baseline. Change in HRV was not associated with change in VMS frequency or intensity across the follow-up. Heart rate variability (HRV) was not associated with basal VMS frequency or intensity in perimenopausal and postmenopausal women experiencing high levels of VMS. Autonomic function may be associated with the onset or presence of VMS, but not with the number or intensity of these symptoms.

50 CFR 648.10 - VMS and DAS requirements for vessel owners/operators.

Code of Federal Regulations, 2011 CFR

2011-10-01

... kept. (ii) Scallop Pre-Landing Notification Form for IFQ and NGOM vessels. Using the Scallop Pre-Landing Notification Form, a vessel issued an IFQ or NGOM scallop permit must report through VMS the...-Landing Notification Form on trips that are not declared as scallop trips, but on which scallops are kept...

Payload Operations Control Center (POCC). [spacelab flight operations

NASA Technical Reports Server (NTRS)

Shipman, D. L.; Noneman, S. R.; Terry, E. S.

1981-01-01

The Spacelab payload operations control center (POCC) timeline analysis program which is used to provide POCC activity and resource information as a function of mission time is described. This program is fully automated and interactive, and is equipped with tutorial displays. The tutorial displays are sufficiently detailed for use by a program analyst having no computer experience. The POCC timeline analysis program is designed to operate on the VAX/VMS version V2.1 computer system.

ANOPP/VMS HSCT ground contour system

NASA Technical Reports Server (NTRS)

Rawls, John, Jr.; Glaab, Lou

1992-01-01

This viewgraph shows the integration of the Visual Motion Simulator with ANOPP. ANOPP is an acronym for the Aircraft NOise Prediction Program. It is a computer code consisting of dedicated noise prediction modules for jet, propeller, and rotor powered aircraft along with flight support and noise propagation modules, all executed under the control of an executive system. The Visual Motion Simulator (VMS) is a ground based motion simulator with six degrees of freedom. The transport-type cockpit is equipped with conventional flight and engine-thrust controls and with flight instrument displays. Control forces on the wheel, column, and rudder pedals are provided by a hydraulic system coupled with an analog computer. The simulator provides variable-feel characteristics of stiffness, damping, coulomb friction, breakout forces, and inertia. The VMS provides a wide range of realistic flight trajectories necessary for computing accurate ground contours. The NASA VMS will be discussed in detail later in this presentation. An equally important part of the system for both ANOPP and VMS is the engine performance. This will also be discussed in the presentation.

Evaluation and recommendations concerning the visual resource inventory and evaluation systems used within the forest service and the bureau of land management

Treesearch

Blaise George Grden

1979-01-01

This paper is an investigation of the Visual Management System (VMS) and the Visual Resource Inventory and Evaluation Process (VRIEP). Questionnaires were developed and sent to persons who were experienced with VMS and/or VRIEP. VMS has been found easier to under-stand and apply than VRIEP. The methodology of VRIEP has been found to he a more complete approach than...

Completing fishing monitoring with spaceborne Vessel Detection System (VDS) and Automatic Identification System (AIS) to assess illegal fishing in Indonesia.

PubMed

Longépé, Nicolas; Hajduch, Guillaume; Ardianto, Romy; Joux, Romain de; Nhunfat, Béatrice; Marzuki, Marza I; Fablet, Ronan; Hermawan, Indra; Germain, Olivier; Subki, Berny A; Farhan, Riza; Muttaqin, Ahmad Deni; Gaspar, Philippe

2017-10-26

The Indonesian fisheries management system is now equipped with the state-of-the-art technologies to deter and combat Illegal, Unreported and Unregulated (IUU) fishing. Since October 2014, non-cooperative fishing vessels can be detected from spaceborne Vessel Detection System (VDS) based on high resolution radar imagery, which directly benefits to coordinated patrol vessels in operation context. This study attempts to monitor the amount of illegal fishing in the Arafura Sea based on this new source of information. It is analyzed together with Vessel Monitoring System (VMS) and satellite-based Automatic Identification System (Sat-AIS) data, taking into account their own particularities. From October 2014 to March 2015, i.e. just after the establishment of a new moratorium by the Indonesian authorities, the estimated share of fishing vessels not carrying VMS, thus being illegal, ranges from 42 to 47%. One year later in January 2016, this proportion decreases and ranges from 32 to 42%. Copyright © 2017 Elsevier Ltd. All rights reserved.

"Smart" Vehicle Management System: A Necessity for Future Endeavors

NASA Astrophysics Data System (ADS)

Haddock, A. T.; Olden, G. W.; Barnes, P. K.

2018-02-01

The "Smart" Vehicle Management System (VMS) will give an overview of how a robust VMS would enable experiments to be conducted on the spacecraft in both manned and unmanned states, increasing the scientific benefits.

STS-135_VMS

NASA Image and Video Library

2011-03-02

JSC2011-E-040202 (2 March 2011) --- NASA astronaut Chris Ferguson, STS-135 commander, departs from the Moffett Field (Calif.) flight operations center for his trip home to Houston after he and his crew trained in the Vertical Motion Simulator (VMS) at NASA's Ames Research Center in Mountain View, March 2, 2011. Photo credit: NASA Photo/Houston Chronicle, Smiley N. Pool

A New Occurrence Model for National Assessment of Undiscovered Volcanogenic Massive Sulfide Deposits

USGS Publications Warehouse

Shanks, W.C. Pat; Dusel-Bacon, Cynthia; Koski, Randolph; Morgan, Lisa A.; Mosier, Dan; Piatak, Nadine M.; Ridley, Ian; Seal, Robert R.; Schulz, Klaus J.; Slack, John F.; Thurston, Roland

2009-01-01

Volcanogenic massive sulfide (VMS) deposits are very significant current and historical resources of Cu-Pb-Zn-Au-Ag, are active exploration targets in several areas of the United States and potentially have significant environmental effects. This new USGS VMS deposit model provides a comprehensive review of deposit occurrence and ore genesis, and fully integrates recent advances in the understanding of active seafloor VMS-forming environments, and integrates consideration of geoenvironmental consequences of mining VMS deposits. Because VMS deposits exhibit a broad range of geological and geochemical characteristics, a suitable classification system is required to incorporate these variations into the mineral deposit model. We classify VMS deposits based on compositional variations in volcanic and sedimentary host rocks. The advantage of the classification method is that it provides a closer linkage between tectonic setting and lithostratigraphic assemblages, and an increased predictive capability during field-based studies.

78 FR 58286 - Proposed Information Collection; Comment Request; Western Region Vessel Monitoring System and Pre...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-23

... Collection; Comment Request; Western Region Vessel Monitoring System and Pre-Trip Reporting Requirements... information or new problems in the fisheries. Vessel Monitoring System (VMS) units will facilitate enforcement... monitoring system (VMS) activation reports, 15 minutes; pre-trip reports, 5 minutes. Estimated Burden Hours...

78 FR 53397 - Atlantic Highly Migratory Species; Vessel Monitoring Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-29

... operators by eliminating the requirement to hail-out two hours in advance of leaving port. Additionally... long as the VMS unit was turned on at least two hours prior to leaving port and remained on until the vessel returned to port. These requirements were specific to vessels both holding an HMS permit and...

Variable Message Signs for road tunnel emergency evacuations.

PubMed

Ronchi, Enrico; Nilsson, Daniel; Modig, Henric; Walter, Anders Lindgren

2016-01-01

This paper investigates the design of Variable Message Signs (VMS) as a way-finding aid for road tunnel emergency evacuations. The use of the Theory of Affordances is suggested to provide recommendations on the design of VMS. A preliminary evaluation of 11 selected VMS systems was performed and 6 of them were further evaluated using an affordance-based within subject stated-preference questionnaire administered to a sample of 62 participants. Results are used to provide recommendations on the characteristics of the VMS systems, such as (1) size of the sign (large or small); (2) use of flashing lights; (3) colour scheme; (4) message coding (i.e., text, pictograms or a combination of them). The best performing VMS features for road tunnel emergency evacuation included the use of larger signs, flashing lights, the combination of emergency exit pictorial symbol in green in one panel and text in amber in the other panel. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

ART/Ada design project, phase 1: Project plan

NASA Technical Reports Server (NTRS)

Allen, Bradley P.

1988-01-01

The plan and schedule for Phase 1 of the Ada based ESBT Design Research Project is described. The main platform for the project is a DEC Ada compiler on VAX mini-computers and VAXstations running the Virtual Memory System (VMS) operating system. The Ada effort and lines of code are given in tabular form. A chart is given of the entire project life cycle.

IBM NJE protocol emulator for VAX/VMS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engert, D.E.

1981-01-01

Communications software has been written at Argonne National Laboratory to enable a VAX/VMS system to participate as an end-node in a standard IBM network by emulating the Network Job Entry (NJE) protocol. NJE is actually a collection of programs that support job networking for the operating systems used on most large IBM-compatible computers (e.g., VM/370, MVS with JES2 or JES3, SVS, MVT with ASP or HASP). Files received by the VAX can be printed or saved in user-selected disk files. Files sent to the network can be routed to any node in the network for printing, punching, or job submission,more » as well as to a VM/370 user's virtual reader. Files sent from the VAX are queued and transmitted asynchronously to allow users to perform other work while files are awaiting transmission. No changes are required to the IBM software.« less

50 CFR 660.14 - Vessel Monitoring System (VMS) requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 13 2014-10-01 2014-10-01 false Vessel Monitoring System (VMS) requirements. 660.14 Section 660.14 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE (CONTINUED) FISHERIES OFF WEST COAST STATES...

nu/TPU -- A DEC TPU compatible editor for UNIX

NASA Astrophysics Data System (ADS)

Rehan, S. C.

nu/TPU is a fully programmable text processing utility compatible with the TPU system found on VMS systems. People used to using TPU or EDT on the former Starlink VAX/VMS service will find that nu/TPU is very similar to these editors.

Measurement and analysis of operating system fault tolerance

NASA Technical Reports Server (NTRS)

Lee, I.; Tang, D.; Iyer, R. K.

1992-01-01

This paper demonstrates a methodology to model and evaluate the fault tolerance characteristics of operational software. The methodology is illustrated through case studies on three different operating systems: the Tandem GUARDIAN fault-tolerant system, the VAX/VMS distributed system, and the IBM/MVS system. Measurements are made on these systems for substantial periods to collect software error and recovery data. In addition to investigating basic dependability characteristics such as major software problems and error distributions, we develop two levels of models to describe error and recovery processes inside an operating system and on multiple instances of an operating system running in a distributed environment. Based on the models, reward analysis is conducted to evaluate the loss of service due to software errors and the effect of the fault-tolerance techniques implemented in the systems. Software error correlation in multicomputer systems is also investigated.

75 FR 18110 - Antarctic Marine Living Resources; Use of Centralized-Vessel Monitoring System and Importation of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-09

.... 0907141130-0112-02] RIN 0648-AX80 Antarctic Marine Living Resources; Use of Centralized-Vessel Monitoring... documentation that the harvesting vessel participated in the Centralized-Vessel Monitoring System (C-VMS... Centralized-Vessel Monitoring System (C-VMS) regardless of where the fish was harvested. This final rule also...

Lessons learned: the switch from VMS to UNIX operations for the STScI's Science and Mission Scheduling Branch

NASA Astrophysics Data System (ADS)

Adler, David S.; Workman, William M., III; Chance, Don

2004-09-01

The Science and Mission Scheduling Branch (SMSB) of the Space Telescope Science Institute (STScI) historically operated exclusively under VMS. Due to diminished support for VMS-based platforms at STScI, SMSB recently transitioned to Unix operations. No additional resources were available to the group; the project was SMSB's to design, develop, and implement. Early decisions included the choice of Python as the primary scripting language; adoption of Object-Oriented Design in the development of base utilities; and the development of a Python utility to interact directly with the Sybase database. The project was completed in January 2004 with the implementation of a GUI to generate the Command Loads that are uplinked to HST. The current tool suite consists of 31 utilities and 271 tools comprising over 60,000 lines of code. In this paper, we summarize the decision-making process used to determine the primary scripting language, database interface, and code management library. We also describe the finished product and summarize lessons learned along the way to completing the project.

Moving BASISplus and TECHLIBplus from VAX/VMS to UNIX

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dominiak, R.

1993-12-31

BASISplus is used at the Laboratory by the Technical Information Services (TIS) Department which is part of the Information and Publishing Division at ARGONNE. TIS operates the Argonne Information Management System (AIM). The AIM System consists of the ANL Libraries On-Line Database (a TECHLIBplus database), the Current Journals Database (IDI`s current contents search), the ANL Publications Tracking Database (a TECHLIBplus database), the Powder Diffraction File Database, and several CD-ROM databases available through a Novell network. The AIM System is available from the desktop of ANL staff through modem and network connections, as well as from the 10 science libraries atmore » ARGONNE. TIS has been a BASISplus and TECHLIBplus site from the start, and never migrated from BASIS K. The decision to migrate from the VAX/VMS platform to a UNIX platform. Migrating a product from one platform to another involves many decisions and considerations. These justifications, decisions, and considerations are explored in this report.« less

The Data Acquisition System for the AAO 2-Degree Field Project

NASA Astrophysics Data System (ADS)

Shortridge, K.; Farrell, T. J.; Bailey, J. A.

1993-01-01

The software system being produced by AAO to control the new 2-degree field fibre positioner and spectrographs is described. The system has to mesh cleanly with the ADAM systems used at AAO for CCD data acquisition, and has to run on a network of disparate machines including VMS Vaxes, UNIX workstations, and VME systems running VxWorks. The basis of the new system is a task control layer that operates by sending self-defining hierarchically-structured and machine-independent messages.

50 CFR 648.10 - VMS and DAS requirements for vessel owners/operators.

Code of Federal Regulations, 2014 CFR

2014-10-01

...′ 22. A point in eastern Vineyard Sound 41°30′ 70°33′ 24. A point east of Martha's Vineyard 41°22.2′ 70... vessel issued an Areas 2/3 open access herring permit, or a vessel declaring an Atlantic herring carrier... declare an Atlantic herring carrier trip via VMS must notify NMFS by declaring a herring trip with the...

50 CFR 622.28 - Vessel monitoring systems (VMSs).

Code of Federal Regulations, 2014 CFR

2014-10-01

... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE FISHERIES OF THE CARIBBEAN, GULF OF MEXICO, AND SOUTH ATLANTIC Reef Fish Resources of the Gulf of Mexico § 622.28 Vessel monitoring systems (VMSs). The VMS requirements of this section apply throughout the Gulf of Mexico and adjacent states. (a) General VMS...

50 CFR 622.28 - Vessel monitoring systems (VMSs).

Code of Federal Regulations, 2013 CFR

2013-10-01

... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE FISHERIES OF THE CARIBBEAN, GULF OF MEXICO, AND SOUTH ATLANTIC Reef Fish Resources of the Gulf of Mexico § 622.28 Vessel monitoring systems (VMSs). The VMS requirements of this section apply throughout the Gulf of Mexico and adjacent states. (a) General VMS...

75 FR 63445 - Vessel Monitoring Systems; Approved Mobile Transmitting Units and Communications Service...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-15

... Monitoring Systems; Approved Mobile Transmitting Units and Communications Service Providers for Use in the... and NOAA-approved VMS communications service providers, please contact the VMS Support Center at... degrees above or below the horizon anywhere on Earth. The GSM/GPRS capability (if activated) gives the...

Satellite control system nucleus for the Brazilian complete space mission

NASA Astrophysics Data System (ADS)

Yamaguti, Wilson; Decarvalhovieira, Anastacio Emanuel; Deoliveira, Julia Leocadia; Cardoso, Paulo Eduardo; Dacosta, Petronio Osorio

1990-10-01

The nucleus of the satellite control system for the Brazilian data collecting and remote sensing satellites is described. The system is based on Digital Equipment Computers and the VAX/VMS operating system. The nucleus provides the access control, the system configuration, the event management, history files management, time synchronization, wall display control, and X25 data communication network access facilities. The architecture of the nucleus and its main implementation aspects are described. The implementation experience acquired is considered.

Simulator certification methods and the vertical motion simulator

NASA Technical Reports Server (NTRS)

Showalter, T. W.

1981-01-01

The vertical motion simulator (VMS) is designed to simulate a variety of experimental helicopter and STOL/VTOL aircraft as well as other kinds of aircraft with special pitch and Z axis characteristics. The VMS includes a large motion base with extensive vertical and lateral travel capabilities, a computer generated image visual system, and a high speed CDC 7600 computer system, which performs aero model calculations. Guidelines on how to measure and evaluate VMS performance were developed. A survey of simulation users was conducted to ascertain they evaluated and certified simulators for use. The results are presented.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, Song; Wang, Yihong; Luo, Wei

In virtualized data centers, virtual disk images (VDIs) serve as the containers in virtual environment, so their access performance is critical for the overall system performance. Some distributed VDI chunk storage systems have been proposed in order to alleviate the I/O bottleneck for VM management. As the system scales up to a large number of running VMs, however, the overall network traffic would become unbalanced with hot spots on some VMs inevitably, leading to I/O performance degradation when accessing the VMs. Here, we propose an adaptive and collaborative VDI storage system (ACStor) to resolve the above performance issue. In comparisonmore » with the existing research, our solution is able to dynamically balance the traffic workloads in accessing VDI chunks, based on the run-time network state. Specifically, compute nodes with lightly loaded traffic will be adaptively assigned more chunk access requests from remote VMs and vice versa, which can effectively eliminate the above problem and thus improves the I/O performance of VMs. We also implement a prototype based on our ACStor design, and evaluate it by various benchmarks on a real cluster with 32 nodes and a simulated platform with 256 nodes. Experiments show that under different network traffic patterns of data centers, our solution achieves up to 2-8 performance gain on VM booting time and VM’s I/O throughput, in comparison with the other state-of-the-art approaches.« less

Migrating the STARLINK Network from VMS to Unix

NASA Astrophysics Data System (ADS)

Clayton, C.

The Starlink Project is a UK-wide astronomical computing service consisting of a network of computers used by UK astronomers at over 25 sites, a collection of software to calibrate and analyze astronomical data, and a team of people to give hardware, software, and administrative support. In order to exploit the most cost-effective hardware and to maintain compatibility with the international community, Starlink is migrating from an entirely VAX/VMS based service to UNIX-based systems. This migration is almost complete, and this paper describes some of the solutions adopted for the wide variety of problems which were encountered. Migration of the hardware platform is discussed first. Equipment which can be re-used under Unix is identified. System software and non-astronomical applications which are required to allow a smooth transition from VMS to Unix are considered next. While many VMS functions can be replaced with Unix equivalents, it has become apparent that there is a small number of key VMS applications which must be provided on the replacement Unix platform to avoid considerable disruption to users. Various strategies for moving the users themselves from VMS to UNIX are considered and their relative merits compared. Fast migration routes are considered to be more effective as long as certain key applications and user aids are already in place. The porting of the Starlink Software Collection is discussed, as is the problem of migrating large quantities of private user code.

Taming Wild Horses: The Need for Virtual Time-based Scheduling of VMs in Network Simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoginath, Srikanth B; Perumalla, Kalyan S; Henz, Brian J

2012-01-01

The next generation of scalable network simulators employ virtual machines (VMs) to act as high-fidelity models of traffic producer/consumer nodes in simulated networks. However, network simulations could be inaccurate if VMs are not scheduled according to virtual time, especially when many VMs are hosted per simulator core in a multi-core simulator environment. Since VMs are by default free-running, on the outset, it is not clear if, and to what extent, their untamed execution affects the results in simulated scenarios. Here, we provide the first quantitative basis for establishing the need for generalized virtual time scheduling of VMs in network simulators,more » based on an actual prototyped implementations. To exercise breadth, our system is tested with multiple disparate applications: (a) a set of message passing parallel programs, (b) a computer worm propagation phenomenon, and (c) a mobile ad-hoc wireless network simulation. We define and use error metrics and benchmarks in scaled tests to empirically report the poor match of traditional, fairness-based VM scheduling to VM-based network simulation, and also clearly show the better performance of our simulation-specific scheduler, with up to 64 VMs hosted on a 12-core simulator node.« less

Project Catch: A space based solution to combat illegal, unreported and unregulated fishing. Part I: Vessel monitoring system

NASA Astrophysics Data System (ADS)

Detsis, Emmanouil; Brodsky, Yuval; Knudtson, Peter; Cuba, Manuel; Fuqua, Heidi; Szalai, Bianca

2012-11-01

Space assets have a unique opportunity to play a more active role in global resource management. There is a clear need to develop resource management tools in a global framework. Illegal, Unregulated and Unreported (IUU) fishing is placing pressure on the health and size of fishing stocks around the world. Earth observation systems can provide fishery management organizations with cost effective monitoring of large swaths of ocean. Project Catch is a fisheries management project based upon the complimentary, but independent Catch-VMS and Catch-GIS systems. Catch-VMS is a Vessel Monitoring System with increased fidelity over existing offerings. Catch-GIS is a Geographical Information System that combines VMS information with existing Earth Observation data and other data sources to identify Illegal, Unregulated and Unreported (IUU) fishing. Project Catch was undertaken by 19 Masters students from the 2010 class of the International Space University. In this paper, the space-based system architecture of Project Catch is presented and analyzed. The rationale for the creation of the system, as well as the engineering trade-off studies in its creation, are discussed. The Catch-VMS proposal was envisaged in order to address two specific problems: (1) the expansion of illegal fishing to high-latitude regions where existing satellite systems coverage is an issue and (2) the lack of coverage in remote oceanic regions due to reliance on coastal-based monitoring. Catch-VMS utilizes ship-borne transponders and hosted-payload receivers on a Global Navigation Satellite System in order to monitor the position and activity of compliant fishing vessels. Coverage is global and continuous with multiple satellites in view providing positional verification through multilateration techniques. The second part of the paper briefly describes the Catch-GIS system and investigates its cost of implementation.

A Modular Implementation for the Simulation of 1D and 2D Solid-State NMR Spectra of Quadrupolar Nuclei in the Virtual Multifrequency Spectrometer-Draw Graphical Interface.

PubMed

Presti, Davide; Pedone, Alfonso; Licari, Daniele; Barone, Vincenzo

2017-05-09

We present the implementation of the solid state (SoS)NMR module for the simulation of several 1D and 2D NMR spectra of all the elements in the periodic table in the virtual multifrequency spectrometer (VMS). This module is fully integrated with the graphical user interface of VMS (VMS-Draw) [Licari et al., J. Comput. Chem. 36, 2015, 321-334], a freeware tool which allows a user-friendly handling of structures and analyses of advanced spectroscopical properties of chemical compounds-from model systems to real-world applications. Besides the numerous modules already available in VMS for the study of electronic, optical, vibrational, vibronic, and EPR properties, here the simulation of NMR spectra is presented with a particular emphasis on those techniques usually employed to investigate solid state systems. The SoSNMR module benefits from its ability to work under both periodic and nonperiodic conditions, such that small molecules/molecular clusters can be treated, as well as extended three-dimensional systems enforcing (or not) translational periodicity. These features allow VMS to simulate spectra resulting from NMR calculations by some popular quantum chemistry codes, namely Gaussian09/16, Castep, and Quantum Espresso. The effectiveness of the SoSNMR module of VMS is examined throughout the manuscript, and applied to simulate 1D static, MAS, and VAS NMR spectra as well as 2D correlation (90°, MAS) and MQMAS spectra of active NMR nuclei embedded in different amorphous and crystalline systems of actual interest in chemistry and material science. Finally, the program is able to simulate the spectra of both the total ensemble of spin-active nuclei present in the system and of subensembles differentiated depending on the chemical environment of the first and second coordination sphere in a very general way applicable to any kind of systems.

Fault-Tree Compiler Program

NASA Technical Reports Server (NTRS)

Butler, Ricky W.; Martensen, Anna L.

1992-01-01

FTC, Fault-Tree Compiler program, is reliability-analysis software tool used to calculate probability of top event of fault tree. Five different types of gates allowed in fault tree: AND, OR, EXCLUSIVE OR, INVERT, and M OF N. High-level input language of FTC easy to understand and use. Program supports hierarchical fault-tree-definition feature simplifying process of description of tree and reduces execution time. Solution technique implemented in FORTRAN, and user interface in Pascal. Written to run on DEC VAX computer operating under VMS operating system.

Vasomotor symptoms and cardiovascular events in postmenopausal women

PubMed Central

Szmuilowicz, Emily D.; Manson, JoAnn E.; Rossouw, Jacques E.; Howard, Barbara V.; Margolis, Karen L.; Greep, Nancy C.; Brzyski, Robert G.; Stefanick, Marcia L.; O'Sullivan, Mary Jo; Wu, Chunyuan; Allison, Matthew; Grobbee, Diederick E.; Johnson, Karen C.; Ockene, Judith K.; Rodriguez, Beatriz L.; Sarto, Gloria E.; Vitolins, Mara Z.; Seely, Ellen W.

2010-01-01

Objective Emerging evidence suggests that women with menopausal vasomotor symptoms (VMS) have increased cardiovascular disease (CVD) risk as measured by surrogate markers. We investigated the relationships between VMS and clinical CVD events and all-cause mortality in the Women's Health Initiative Observational Study (WHI-OS). Methods We compared the risk of incident CVD events and all-cause mortality between four groups of women (total N=60,027): (1) No VMS at menopause onset and no VMS at WHI-OS enrollment (no VMS [referent group]); (2) VMS at menopause onset, but not at WHI-OS enrollment (early VMS); (3) VMS at both menopause onset and WHI-OS enrollment (persistent VMS [early and late]); and (4) VMS at WHI-OS enrollment, but not at menopause onset (late VMS). Results For women with early VMS (N=24,753), compared to no VMS (N=18,799), hazard ratios (HRs) and 95% confidence intervals (CIs) in fully-adjusted models were: major CHD, 0.94 (0.84, 1.06); stroke, 0.83 (0.72, 0.96); total CVD, 0.89 (0.81, 0.97); and all-cause mortality, 0.92 (0.85, 0.99). For women with persistent VMS (N=15,084), there was no significant association with clinical events. For women with late VMS (N=1,391) compared to no VMS, HRs and 95% CIs were: major CHD, 1.32 (1.01, 1.71); stroke, 1.14 (0.82, 1.59); total CVD, 1.23 (1.00, 1.52); and all-cause mortality, 1.29 (1.08, 1.54). Conclusions Early VMS were not associated with increased CVD risk. Rather, early VMS were associated with decreased risk of stroke, total CVD events, and all-cause mortality. Late VMS were associated with increased CHD risk and all-cause mortality. The predictive value of VMS for clinical CVD events may vary with onset of VMS at different stages of menopause. Further research examining the mechanisms underlying these associations is needed. Future studies will also be necessary to investigate whether VMS that develop for the first time in the later postmenopausal years represent a pathophysiologic process distinct from classical perimenopausal VMS. PMID:21358352

Elevating Virtual Machine Introspection for Fine-Grained Process Monitoring: Techniques and Applications

ERIC Educational Resources Information Center

Srinivasan, Deepa

2013-01-01

Recent rapid malware growth has exposed the limitations of traditional in-host malware-defense systems and motivated the development of secure virtualization-based solutions. By running vulnerable systems as virtual machines (VMs) and moving security software from inside VMs to the outside, the out-of-VM solutions securely isolate the anti-malware…

ACStor: Optimizing Access Performance of Virtual Disk Images in Clouds

DOE PAGES

Wu, Song; Wang, Yihong; Luo, Wei; ...

2017-03-02

In virtualized data centers, virtual disk images (VDIs) serve as the containers in virtual environment, so their access performance is critical for the overall system performance. Some distributed VDI chunk storage systems have been proposed in order to alleviate the I/O bottleneck for VM management. As the system scales up to a large number of running VMs, however, the overall network traffic would become unbalanced with hot spots on some VMs inevitably, leading to I/O performance degradation when accessing the VMs. Here, we propose an adaptive and collaborative VDI storage system (ACStor) to resolve the above performance issue. In comparisonmore » with the existing research, our solution is able to dynamically balance the traffic workloads in accessing VDI chunks, based on the run-time network state. Specifically, compute nodes with lightly loaded traffic will be adaptively assigned more chunk access requests from remote VMs and vice versa, which can effectively eliminate the above problem and thus improves the I/O performance of VMs. We also implement a prototype based on our ACStor design, and evaluate it by various benchmarks on a real cluster with 32 nodes and a simulated platform with 256 nodes. Experiments show that under different network traffic patterns of data centers, our solution achieves up to 2-8 performance gain on VM booting time and VM’s I/O throughput, in comparison with the other state-of-the-art approaches.« less

50 CFR 665.19 - Vessel monitoring system.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) shall not be assessed any fee or other charges to obtain and use a VMS unit, including the communication charges related directed to requirements under this section. Communication charges related to any... equipment, including a computer, to any VMS unit when deemed appropriate by the SAC. ...

Channel leadership in health care marketing: a natural role for hospitals.

PubMed

Fugate, D L; Decker, P J

1990-01-01

Health care has entered an era of rapid change. Most observers agree that important long-term changes will fundamentally reshape health care as we know it. To that end, health care providers should consider the benefits of operating vertically integrated marketing system with hospitals as the channel leader. Whether an administered VMS (hospitals have the power to gain compliance) or a corporate VMS (hospitals own successive levels of care providers), integrated channel management holds the promise of cost containment and quality patient care for the future. However, a great deal of integrating work must be done before VMSs will become a practical solution. Research studies are needed on each of the issues just discussed. As marketers, it is time we make a transition from treating health care marketing as a disjointed entity and instead treat it as an industry where all marketing principles are considered including channel management.

Duration of menopausal vasomotor symptoms over the menopause transition.

PubMed

Avis, Nancy E; Crawford, Sybil L; Greendale, Gail; Bromberger, Joyce T; Everson-Rose, Susan A; Gold, Ellen B; Hess, Rachel; Joffe, Hadine; Kravitz, Howard M; Tepper, Ping G; Thurston, Rebecca C

2015-04-01

The expected duration of menopausal vasomotor symptoms (VMS) is important to women making decisions about possible treatments. To determine total duration of frequent VMS (≥ 6 days in the previous 2 weeks) (hereafter total VMS duration) during the menopausal transition, to quantify how long frequent VMS persist after the final menstrual period (FMP) (hereafter post-FMP persistence), and to identify risk factors for longer total VMS duration and longer post-FMP persistence. The Study of Women's Health Across the Nation (SWAN) is a multiracial/multiethnic observational study of the menopausal transition among 3302 women enrolled at 7 US sites. From February 1996 through April 2013, women completed a median of 13 visits. Analyses included 1449 women with frequent VMS. Total VMS duration (in years) (hot flashes or night sweats) and post-FMP persistence (in years) into postmenopause. The median total VMS duration was 7.4 years. Among 881 women who experienced an observable FMP, the median post-FMP persistence was 4.5 years. Women who were premenopausal or early perimenopausal when they first reported frequent VMS had the longest total VMS duration (median, >11.8 years) and post-FMP persistence (median, 9.4 years). Women who were postmenopausal at the onset of VMS had the shortest total VMS duration (median, 3.4 years). Compared with women of other racial/ethnic groups, African American women reported the longest total VMS duration (median, 10.1 years). Additional factors related to longer duration of VMS (total VMS duration or post-FMP persistence) were younger age, lower educational level, greater perceived stress and symptom sensitivity, and higher depressive symptoms and anxiety at first report of VMS. Frequent VMS lasted more than 7 years during the menopausal transition for more than half of the women and persisted for 4.5 years after the FMP. Individual characteristics (eg, being premenopausal and having greater negative affective factors when first experiencing VMS) were related to longer-lasting VMS. Health care professionals should counsel women to expect that frequent VMS could last more than 7 years, and they may last longer for African American women.

Findings from Matching VIIRS Boat Detection and VMS Data

NASA Astrophysics Data System (ADS)

Hsu, F. C.; Elvidge, C.; Zhizhin, M. N.; Baugh, K.; Ghosh, T.

2017-12-01

With the superior nigthtime sensitivity and spatial resolution provided by VIIRS Day Night Band, we had developed algorithm known as VIIRS Boat Detection (VBD) to detect fishing vessels active at night using light to attract schools of fish. While VBD is effective in finding bright boats, little is known on the nature of boats that emits such bright lights. To complement the missing attribute of VBD detections, the authors find aid from Vessel Monitoring System (VMS) data. VMS is widely used in monitoring fishing vessels logging their coordinate nominally every hour, along with vessel specifications such as tonnage, size, and gear type. This study matches VMS records with VBD detections, broadening the understanding of the lighting streategy used by fisherman, and provide valuable assumption on possible vessel types for VBD detections.

Guidelines for the operation of variable message signs on state highways

DOT National Transportation Integrated Search

2004-06-01

A variable message sign (VMS) is a traffic control device whose message can be changed manually, electrically, mechanically, or electromechanically to provide motorists with information about traffic congestion, traffic crashes, maintenance operation...

LAS - LAND ANALYSIS SYSTEM, VERSION 5.0

NASA Technical Reports Server (NTRS)

Pease, P. B.

1994-01-01

The Land Analysis System (LAS) is an image analysis system designed to manipulate and analyze digital data in raster format and provide the user with a wide spectrum of functions and statistical tools for analysis. LAS offers these features under VMS with optional image display capabilities for IVAS and other display devices as well as the X-Windows environment. LAS provides a flexible framework for algorithm development as well as for the processing and analysis of image data. Users may choose between mouse-driven commands or the traditional command line input mode. LAS functions include supervised and unsupervised image classification, film product generation, geometric registration, image repair, radiometric correction and image statistical analysis. Data files accepted by LAS include formats such as Multi-Spectral Scanner (MSS), Thematic Mapper (TM) and Advanced Very High Resolution Radiometer (AVHRR). The enhanced geometric registration package now includes both image to image and map to map transformations. The over 200 LAS functions fall into image processing scenario categories which include: arithmetic and logical functions, data transformations, fourier transforms, geometric registration, hard copy output, image restoration, intensity transformation, multispectral and statistical analysis, file transfer, tape profiling and file management among others. Internal improvements to the LAS code have eliminated the VAX VMS dependencies and improved overall system performance. The maximum LAS image size has been increased to 20,000 lines by 20,000 samples with a maximum of 256 bands per image. The catalog management system used in earlier versions of LAS has been replaced by a more streamlined and maintenance-free method of file management. This system is not dependent on VAX/VMS and relies on file naming conventions alone to allow the use of identical LAS file names on different operating systems. While the LAS code has been improved, the original capabilities of the system have been preserved. These include maintaining associated image history, session logging, and batch, asynchronous and interactive mode of operation. The LAS application programs are integrated under version 4.1 of an interface called the Transportable Applications Executive (TAE). TAE 4.1 has four modes of user interaction: menu, direct command, tutor (or help), and dynamic tutor. In addition TAE 4.1 allows the operation of LAS functions using mouse-driven commands under the TAE-Facelift environment provided with TAE 4.1. These modes of operation allow users, from the beginner to the expert, to exercise specific application options. LAS is written in C-language and FORTRAN 77 for use with DEC VAX computers running VMS with approximately 16Mb of physical memory. This program runs under TAE 4.1. Since TAE 4.1 is not a current version of TAE, TAE 4.1 is included within the LAS distribution. Approximately 130,000 blocks (65Mb) of disk storage space are necessary to store the source code and files generated by the installation procedure for LAS and 44,000 blocks (22Mb) of disk storage space are necessary for TAE 4.1 installation. The only other dependencies for LAS are the subroutine libraries for the specific display device(s) that will be used with LAS/DMS (e.g. X-Windows and/or IVAS). The standard distribution medium for LAS is a set of two 9track 6250 BPI magnetic tapes in DEC VAX BACKUP format. It is also available on a set of two TK50 tape cartridges in DEC VAX BACKUP format. This program was developed in 1986 and last updated in 1992.

50 CFR 622.9 - Vessel monitoring systems (VMSs).

Code of Federal Regulations, 2012 CFR

2012-10-01

... NMFS as provided by a NMFS-approved communication service provider. (2) Gulf reef fish. The VMS requirements of this paragraph (a)(2) apply throughout the Gulf of Mexico and adjacent states. (i) General VMS... ADMINISTRATION, DEPARTMENT OF COMMERCE FISHERIES OF THE CARIBBEAN, GULF, AND SOUTH ATLANTIC General Provisions...

76 FR 75523 - Vessel Monitoring Systems; Approved Mobile Transmitting Units and Communications Service...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-02

... communications (email, eforms) and position services. This configuration is enabled through the Iridium Short... relevant features of the enhanced mobile transmitting unit (E-MTU) VMS and communications service providers... communications service providers (including specifications), please contact the VMS Support Center at phone (888...

IMAT (Integrated Multidisciplinary Analysis Tool) user's guide for the VAX/VMS computer

NASA Technical Reports Server (NTRS)

Meissner, Frances T. (Editor)

1988-01-01

The Integrated Multidisciplinary Analysis Tool (IMAT) is a computer software system for the VAX/VMS computer developed at the Langley Research Center. IMAT provides researchers and analysts with an efficient capability to analyze satellite control systems influenced by structural dynamics. Using a menu-driven executive system, IMAT leads the user through the program options. IMAT links a relational database manager to commercial and in-house structural and controls analysis codes. This paper describes the IMAT software system and how to use it.

Evaluation of a commercial system for CAMAC-based control of the Chalk River Laboratories tandem-accelerator-superconducting-cyclotron complexcomplex

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greiner, B.F.; Caswell, D.J.; Slater, W.R.

1992-04-01

This paper discusses the control system of the Tandem Accelerator Superconducting Cyclotron (TASCC) of AECL Research at its Chalk River Laboratories which is presently based on a PDP-11 computer and the IAS operating system. The estimated expense of a custom conversion of the system to a current, equivalent operating system is prohibitive. The authors have evaluated a commercial control package from VISTA Control Systems based on VAX microcomputers and the VMS operating system. Vsystem offers a modern, graphical operator interface, an extensive software toolkit for configuration of the system and a multi-feature data-logging capability, all of which far surpass themore » functionality of the present control system. However, the implementation of some familiar, practical features that TASCC operators find to be essential has proven to be challenging. The assessment of Vsystem, which is described in terms of presently perceived strengths and weaknesses, is, on balance, very positive.« less

Using Vessel Monitoring System Data to Identify and Characterize Trips Made by Fishing Vessels in the United States North Pacific

PubMed Central

Haynie, Alan C.

2016-01-01

Time spent fishing is the effort metric often studied in fisheries but it may under-represent the effort actually expended by fishers. Entire fishing trips, from the time vessels leave port until they return, may prove more useful for examining trends in fleet dynamics, fisher behavior, and fishing costs. However, such trip information is often difficult to resolve. We identified ~30,000 trips made by vessels that targeted walleye pollock (Gadus chalcogrammus) in the Eastern Bering Sea from 2008–2014 by using vessel monitoring system (VMS) and landings data. We compared estimated trip durations to observer data, which were available for approximately half of trips. Total days at sea were estimated with < 1.5% error and 96.4% of trip durations were either estimated with < 5% error or they were within expected measurement error. With 99% accuracy, we classified trips as fishing for pollock, for another target species, or not fishing. This accuracy lends strong support to the use of our method with unobserved trips across North Pacific fisheries. With individual trips resolved, we examined potential errors in datasets which are often viewed as “the truth.” Despite having > 5 million VMS records (timestamps and vessel locations), this study was as much about understanding and managing data errors as it was about characterizing trips. Missing VMS records were pervasive and they strongly influenced our approach. To understand implications of missing data on inference, we simulated removal of VMS records from trips. Removal of records straightened (i.e., shortened) vessel trajectories, and travel distances were underestimated, on average, by 1.5–13.4% per trip. Despite this bias, VMS proved robust for trip characterization and for improved quality control of human-recorded data. Our scrutiny of human-reported and VMS data advanced our understanding of the potential utility and challenges facing VMS users globally. PMID:27788174

Using Vessel Monitoring System Data to Identify and Characterize Trips Made by Fishing Vessels in the United States North Pacific.

PubMed

Watson, Jordan T; Haynie, Alan C

2016-01-01

Time spent fishing is the effort metric often studied in fisheries but it may under-represent the effort actually expended by fishers. Entire fishing trips, from the time vessels leave port until they return, may prove more useful for examining trends in fleet dynamics, fisher behavior, and fishing costs. However, such trip information is often difficult to resolve. We identified ~30,000 trips made by vessels that targeted walleye pollock (Gadus chalcogrammus) in the Eastern Bering Sea from 2008-2014 by using vessel monitoring system (VMS) and landings data. We compared estimated trip durations to observer data, which were available for approximately half of trips. Total days at sea were estimated with < 1.5% error and 96.4% of trip durations were either estimated with < 5% error or they were within expected measurement error. With 99% accuracy, we classified trips as fishing for pollock, for another target species, or not fishing. This accuracy lends strong support to the use of our method with unobserved trips across North Pacific fisheries. With individual trips resolved, we examined potential errors in datasets which are often viewed as "the truth." Despite having > 5 million VMS records (timestamps and vessel locations), this study was as much about understanding and managing data errors as it was about characterizing trips. Missing VMS records were pervasive and they strongly influenced our approach. To understand implications of missing data on inference, we simulated removal of VMS records from trips. Removal of records straightened (i.e., shortened) vessel trajectories, and travel distances were underestimated, on average, by 1.5-13.4% per trip. Despite this bias, VMS proved robust for trip characterization and for improved quality control of human-recorded data. Our scrutiny of human-reported and VMS data advanced our understanding of the potential utility and challenges facing VMS users globally.

The geo-control system for station keeping and colocation of geostationary satellites

NASA Technical Reports Server (NTRS)

Montenbruck, O.; Eckstein, M. C.; Gonner, J.

1993-01-01

GeoControl is a compact but powerful and accurate software system for station keeping of single and colocated satellites, which has been developed at the German Space Operations Center. It includes four core modules for orbit determination (including maneuver estimation), maneuver planning, monitoring of proximities between colocated satellites, and interference and event prediction. A simple database containing state vector and maneuver information at selected epochs is maintained as a central interface between the modules. A menu driven shell utilizing form screens for data input serves as the central user interface. The software is written in Ada and FORTRAN and may be used on VAX workstations or mainframes under the VMS operating system.

Urgent Virtual Machine Eviction with Enlightened Post-Copy

DTIC Science & Technology

2015-12-01

memory is in use, almost all of which is by Memcached. MySQL : The VMs run MySQL 5.6, and the clients execute OLTPBenchmark [3] using the Twitter...workload with scale factor of 960. The VMs are each allocated 16 cores and 30 GB of memory, and MySQL is configured with a 16 GB buffer pool in memory. The...operation mix for 5 minutes as a warm-up. At the time of migration, MySQL uses approximately 17 GB of memory, and almost all of the 30 GB memory is

50 CFR 300.117 - Prohibitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

.... (9) Fail to use real-time C-VMS port-to-port on board U.S. vessels harvesting AMLR in the Convention... documentation of the use of real-time C-VMS port-to-port by the vessel that harvested such Dissostichus species... fish, from sorting the catch to the storage of the finished product. (bb) Vessel monitoring systems. (1...

Space station operating system study

NASA Technical Reports Server (NTRS)

Horn, Albert E.; Harwell, Morris C.

1988-01-01

The current phase of the Space Station Operating System study is based on the analysis, evaluation, and comparison of the operating systems implemented on the computer systems and workstations in the software development laboratory. Primary emphasis has been placed on the DEC MicroVMS operating system as implemented on the MicroVax II computer, with comparative analysis of the SUN UNIX system on the SUN 3/260 workstation computer, and to a limited extent, the IBM PC/AT microcomputer running PC-DOS. Some benchmark development and testing was also done for the Motorola MC68010 (VM03 system) before the system was taken from the laboratory. These systems were studied with the objective of determining their capability to support Space Station software development requirements, specifically for multi-tasking and real-time applications. The methodology utilized consisted of development, execution, and analysis of benchmark programs and test software, and the experimentation and analysis of specific features of the system or compilers in the study.

Implementation of a graphical user interface for the virtual multifrequency spectrometer: The VMS-Draw tool.

PubMed

Licari, Daniele; Baiardi, Alberto; Biczysko, Malgorzata; Egidi, Franco; Latouche, Camille; Barone, Vincenzo

2015-02-15

This article presents the setup and implementation of a graphical user interface (VMS-Draw) for a virtual multifrequency spectrometer. Special attention is paid to ease of use, generality and robustness for a panel of spectroscopic techniques and quantum mechanical approaches. Depending on the kind of data to be analyzed, VMS-Draw produces different types of graphical representations, including two-dimensional or three-dimesional (3D) plots, bar charts, or heat maps. Among other integrated features, one may quote the convolution of stick spectra to obtain realistic line-shapes. It is also possible to analyze and visualize, together with the structure, the molecular orbitals and/or the vibrational motions of molecular systems thanks to 3D interactive tools. On these grounds, VMS-Draw could represent a useful additional tool for spectroscopic studies integrating measurements and computer simulations. Copyright © 2014 Wiley Periodicals, Inc.

FVID: Fishing Vessel Type Identification Based on VMS Trajectories

NASA Astrophysics Data System (ADS)

Huang, Haiguang; Hong, Feng; Liu, Jing; Liu, Chao; Feng, Yuan; Guo, Zhongwen

2018-05-01

Vessel Monitoring System (VMS) provides a new opportunity for quantified fishing research. Many approaches have been proposed to recognize fishing activities with VMS trajectories based on the types of fishing vessels. However, one research problem is still calling for solutions, how to identify the fishing vessel type based on only VMS trajectories. This problem is important because it requires the fishing vessel type as a preliminary to recognize fishing activities from VMS trajectories. This paper proposes fishing vessel type identification scheme (FVID) based only on VMS trajectories. FVID exploits feature engineering and machine learning schemes of XGBoost as its two key blocks and classifies fishing vessels into nine types. The dataset contains all the fishing vessel trajectories in the East China Sea in March 2017, including 10031 pre-registered fishing vessels and 1350 unregistered vessels of unknown types. In order to verify type identification accuracy, we first conduct a 4-fold cross-validation on the trajectories of registered fishing vessels. The classification accuracy is 95.42%. We then apply FVID to the unregistered fishing vessels to identify their types. After classifying the unregistered fishing vessel types, their fishing activities are further recognized based upon their types. At last, we calculate and compare the fishing density distribution in the East China Sea before and after applying the unregistered fishing vessels, confirming the importance of type identification of unregistered fishing vessels.

Development and operation of a real-time simulation at the NASA Ames Vertical Motion Simulator

NASA Technical Reports Server (NTRS)

Sweeney, Christopher; Sheppard, Shirin; Chetelat, Monique

1993-01-01

The Vertical Motion Simulator (VMS) facility at the NASA Ames Research Center combines the largest vertical motion capability in the world with a flexible real-time operating system allowing research to be conducted quickly and effectively. Due to the diverse nature of the aircraft simulated and the large number of simulations conducted annually, the challenge for the simulation engineer is to develop an accurate real-time simulation in a timely, efficient manner. The SimLab facility and the software tools necessary for an operating simulation will be discussed. Subsequent sections will describe the development process through operation of the simulation; this includes acceptance of the model, validation, integration and production phases.

VMSbase: an R-package for VMS and logbook data management and analysis in fisheries ecology.

PubMed

Russo, Tommaso; D'Andrea, Lorenzo; Parisi, Antonio; Cataudella, Stefano

2014-01-01

VMSbase is an R package devised to manage, process and visualize information about fishing vessels activity (provided by the vessel monitoring system--VMS) and catches/landings (as reported in the logbooks). VMSbase is primarily conceived to be user-friendly; to this end, a suite of state-of-the-art analyses is accessible via a graphical interface. In addition, the package uses a database platform allowing large datasets to be stored, managed and processed vey efficiently. Methodologies include data cleaning, that is removal of redundant or evidently erroneous records, and data enhancing, that is interpolation and merging with external data sources. In particular, VMSbase is able to estimate sea bottom depth for single VMS pings using an on-line connection to the National Oceanic and Atmospheric Administration (NOAA) database. It also allows VMS pings to be assigned to whatever geographic partitioning has been selected by users. Standard analyses comprise: 1) métier identification (using a modified CLARA clustering approach on Logbook data or Artificial Neural Networks on VMS data); 2) linkage between VMS and Logbook records, with the former organized into fishing trips; 3) discrimination between steaming and fishing points; 4) computation of spatial effort with respect to user-selected grids; 5) calculation of standard fishing effort indicators within Data Collection Framework; 6) a variety of mapping tools, including an interface for Google viewer; 7) estimation of trawled area. Here we report a sample workflow for the accessory sample datasets (available with the package) in order to explore the potentialities of VMSbase. In addition, the results of some performance tests on two large datasets (1×10(5) and 1×10(6) VMS signals, respectively) are reported to inform about the time required for the analyses. The results, although merely illustrative, indicate that VMSbase can represent a step forward in extracting and enhancing information from VMS/logbook data for fisheries studies.

Exploiting GPUs in Virtual Machine for BioCloud

PubMed Central

Jo, Heeseung; Jeong, Jinkyu; Lee, Myoungho; Choi, Dong Hoon

2013-01-01

Recently, biological applications start to be reimplemented into the applications which exploit many cores of GPUs for better computation performance. Therefore, by providing virtualized GPUs to VMs in cloud computing environment, many biological applications will willingly move into cloud environment to enhance their computation performance and utilize infinite cloud computing resource while reducing expenses for computations. In this paper, we propose a BioCloud system architecture that enables VMs to use GPUs in cloud environment. Because much of the previous research has focused on the sharing mechanism of GPUs among VMs, they cannot achieve enough performance for biological applications of which computation throughput is more crucial rather than sharing. The proposed system exploits the pass-through mode of PCI express (PCI-E) channel. By making each VM be able to access underlying GPUs directly, applications can show almost the same performance as when those are in native environment. In addition, our scheme multiplexes GPUs by using hot plug-in/out device features of PCI-E channel. By adding or removing GPUs in each VM in on-demand manner, VMs in the same physical host can time-share their GPUs. We implemented the proposed system using the Xen VMM and NVIDIA GPUs and showed that our prototype is highly effective for biological GPU applications in cloud environment. PMID:23710465

Exploiting GPUs in virtual machine for BioCloud.

PubMed

Jo, Heeseung; Jeong, Jinkyu; Lee, Myoungho; Choi, Dong Hoon

2013-01-01

Recently, biological applications start to be reimplemented into the applications which exploit many cores of GPUs for better computation performance. Therefore, by providing virtualized GPUs to VMs in cloud computing environment, many biological applications will willingly move into cloud environment to enhance their computation performance and utilize infinite cloud computing resource while reducing expenses for computations. In this paper, we propose a BioCloud system architecture that enables VMs to use GPUs in cloud environment. Because much of the previous research has focused on the sharing mechanism of GPUs among VMs, they cannot achieve enough performance for biological applications of which computation throughput is more crucial rather than sharing. The proposed system exploits the pass-through mode of PCI express (PCI-E) channel. By making each VM be able to access underlying GPUs directly, applications can show almost the same performance as when those are in native environment. In addition, our scheme multiplexes GPUs by using hot plug-in/out device features of PCI-E channel. By adding or removing GPUs in each VM in on-demand manner, VMs in the same physical host can time-share their GPUs. We implemented the proposed system using the Xen VMM and NVIDIA GPUs and showed that our prototype is highly effective for biological GPU applications in cloud environment.

An Evaluation of an Ada Implementation of the Rete Algorithm for Embedded Flight Processors

DTIC Science & Technology

1990-12-01

computers was desired. The VAX VMS operating system has many built-in methods for determining program performance (including VAX PCA), but these methods... overviev , of the target environment-- the MIL-STD-1750A VHSIC Avionic Modular Processor ( VA.IP, running under the Ada Avionics Real-Time Software (AARTS... computers . Mil-STD-1750A, the Air Force’s standard flight computer architecture, however, places severe constraints on applications software processing

Evaluation of automated decisionmaking methodologies and development of an integrated robotic system simulation. Appendix B: ROBSIM programmer's guide

NASA Technical Reports Server (NTRS)

Haley, D. C.; Almand, B. J.; Thomas, M. M.; Krauze, L. D.; Gremban, K. D.; Sanborn, J. C.; Kelly, J. H.; Depkovich, T. M.; Wolfe, W. J.; Nguyen, T.

1986-01-01

The purpose of the Robotic Simulation (ROBSIM) program is to provide a broad range of computer capabilities to assist in the design, verification, simulation, and study of robotic systems. ROBSIM is programmed in FORTRAM 77 and implemented on a VAX 11/750 computer using the VMS operating system. The programmer's guide describes the ROBSIM implementation and program logic flow, and the functions and structures of the different subroutines. With the manual and the in-code documentation, an experienced programmer can incorporate additional routines and modify existing ones to add desired capabilities.

Evaluation of automated decisionmaking methodologies and development of an integrated robotic system simulation, appendix B

NASA Technical Reports Server (NTRS)

Haley, D. C.; Almand, B. J.; Thomas, M. M.; Krauze, L. D.; Gremban, K. D.; Sanborn, J. C.; Kelly, J. H.; Depkovich, T. M.

1984-01-01

The purpose of the Robotics Simulation (ROBSIM) program is to provide a broad range of computer capabilities to assist in the design, verification, simulation, and study of robotic systems. ROBSIM is programmed in FORTRAN 77 and implemented on a VAX 11/750 computer using the VMS operating system. This programmer's guide describes the ROBSIM implementation and program logic flow, and the functions and structures of the different subroutines. With this manual and the in-code documentation, and experienced programmer can incorporate additional routines and modify existing ones to add desired capabilities.

77 FR 61727 - Atlantic Highly Migratory Species; Vessel Monitoring Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-11

... seq.; 16 U.S.C. 1801 et seq. Dated: October 5, 2012. Emily H. Menashes, Deputy Director, Office of..., also may be downloaded from the HMS Web site at www.nmfs.noaa.gov/sfa/hms/ . A list of E-MTU VMS units... . Copies of this list and other information may be obtained by contacting the VMS Support Center at (phone...

78 FR 68757 - Atlantic Highly Migratory Species; Vessel Monitoring Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-15

... vessel that declares out of the HMS fishery long-term declaration by as much as 4 hours if it declares... hours a day, 7 days a week to provide hourly position reports for the duration of the long-term... to use VMS, to provide hourly position reports 24 hours a day, 7 days a week (24/7) via VMS. The...

Study of application of space telescope science operations software for SIRTF use

NASA Technical Reports Server (NTRS)

Dignam, F.; Stetson, E.; Allendoerfer, W.

1985-01-01

The design and development of the Space Telescope Science Operations Ground System (ST SOGS) was evaluated to compile a history of lessons learned that would benefit NASA's Space Infrared Telescope Facility (SIRTF). Forty-nine specific recommendations resulted and were categorized as follows: (1) requirements: a discussion of the content, timeliness and proper allocation of the system and segment requirements and the resulting impact on SOGS development; (2) science instruments: a consideration of the impact of the Science Instrument design and data streams on SOGS software; and (3) contract phasing: an analysis of the impact of beginning the various ST program segments at different times. Approximately half of the software design and source code might be useable for SIRTF. Transportability of this software requires, at minimum, a compatible DEC VAX-based architecture and VMS operating system, system support software similar to that developed for SOGS, and continued evolution of the SIRTF operations concept and requirements such that they remain compatible with ST SOGS operation.

Trajectories of Vasomotor Symptoms and Carotid Intima Media Thickness in the Study of Women's Health Across the Nation.

PubMed

Thurston, Rebecca C; El Khoudary, Samar R; Tepper, Ping Guo; Jackson, Elizabeth A; Joffe, Hadine; Chen, Hsiang-Yu; Matthews, Karen A

2016-01-01

Emerging work has linked menopausal vasomotor symptoms (VMS) to subclinical cardiovascular disease (CVD) among women. However, VMS are dynamic over time. No studies have considered how temporal patterns of VMS may relate to subclinical CVD. We tested how temporal patterns of VMS assessed over 13 years were related to carotid intima media thickness (IMT) among midlife women. The Study of Women's Health Across the Nation is a longitudinal cohort study of midlife women. Eight hundred and eleven white, black, Hispanic, and Chinese participants with a well-characterized final menstrual period completed measures of VMS, a blood draw, and physical measures approximately annually for 13 years. Women underwent a carotid artery ultrasound at study visit 12. Four trajectories of VMS were identified by trajectory analysis (consistently high, early-onset, late-onset, persistently low VMS) and tested in relation to carotid indices in linear regression models. Results indicated that women with early-onset VMS had both greater mean IMT (beta, b [standard error, SE]=0.03 [0.01], P=0.03) and greater maximal IMT (b [SE]=0.04 [0.01], P=0.008) than women with consistently low VMS, adjusting for demographics and CVD risk factors. This is the first study to test trajectories of VMS in relation to subclinical CVD. Women with VMS early in the menopause transition had higher mean IMT and maximal IMT than those with consistently low VMS across the transition. Associations were not accounted for by demographic factors nor by CVD risk factors. Results can signal to women in need of early CVD risk reduction. © 2015 American Heart Association, Inc.

Intralesional sclerotherapy for subcutaneous venous malformations in children.

PubMed

Uehara, Shuichiro; Osuga, Keigo; Yoneda, Akihiro; Oue, Takaharu; Yamanaka, Hiroaki; Fukuzawa, Masahiro

2009-08-01

Venous malformations (VMs) involve multiple anatomical spaces and encase critical neuromuscular structures, making surgical treatment difficult. Recently sclerotherapy has been suggested as the primary treatment for VMs instead of surgical intervention. This report represents eight cases of children with VMs treated with direct percutaneous injections of sclerosing agents, such as ethanol, polidocanol or ethanolamine oleate. All eight patients had large lesions (>3 cm) located on the head, foot, neck and face. Sclerotherapy was performed in an angiographic suite under general anesthesia. Prior to sclerotherapy, percutaneous phlebography was performed in order to visualize the dynamic situation inside the lesion and the draining flow into the adjacent venous vascular system. A 2-15 ml of sclerosing agent was injected into VM lesions under fluoroscopy. An evaluation by MRI examination showed that 6 out of 8 patients had remission, and alleviation of their symptoms without major complications, furthermore one of the lesions apparently disappeared. Intralesional sclerotherapy provides a simple, safe and effective treatment for VMs in the subcutaneous lesions in children.

Associations of Menopausal Vasomotor Symptoms with Fracture Incidence

PubMed Central

Aragaki, Aaron; Cauley, Jane A.; Manson, JoAnn E.; LeBlanc, Erin; Wallace, Robert; Wactawski-Wende, Jean; LaCroix, Andrea; O'Sullivan, Mary Jo; Vitolins, Mara; Watts, Nelson B.

2015-01-01

Context: Vasomotor symptoms (VMS) are common. Whether VMS are associated with fracture incidence or bone mineral density (BMD) levels is unknown. Objective: This study aimed to examine associations of baseline VMS with fracture incidence and BMD. Design: This was a prospective observational study with mean (SD) followup of 8.2 (1.7) years (1993–2005). Setting: Forty United States clinical centers. Participants: We examined data from Women's Health Initiative Clinical Trial participants (n = 23 573) age 50–79 years not using menopausal hormone therapy, and 4,867 participants of the BMD sub-study. Interventions: None. Main Outcome Measures: We measured baseline VMS, incident adjudicated fractures, and BMD (baseline, annual visits 1, 3, 6, and 9). Results: After adjustment for baseline age, body mass index, race/ethnicity, smoking, and education, the hazard ratio for hip fracture among women with baseline moderate/severe VMS (vs no VMS) was 1.78 (95% confidence interval [CI], 1.20–2.64; P = .01). There was no association between VMS and vertebral fracture. VMS severity was inversely associated with BMD during followup (P = .004 for femoral neck, P = .045 for lumbar spine). In repeated measures models, compared with women who reported no VMS, women with moderate/severe VMS had 0.015 g/cm2 lower femoral neck BMD (95% CI, −0.025–−0.005) and 0.016 g/cm2 lower lumbar spine BMD (95% CI, −0.032–−0.004). Conclusions: Women with moderate/severe VMS have lower BMD and increased hip fracture rates. Elucidation of the biological mechanisms underlying these associations may inform the design of preventive strategies for at-risk women prior to occurrence of fracture. PMID:25522264

Longitudinal Analysis of Changes in Weight and Waist Circumference in Relation to Incident Vasomotor Symptoms: the Study of Women’ Health Across the Nation (SWAN)

PubMed Central

Gold, Ellen B.; Crawford, Sybil L.; Shelton, Janie F.; Tepper, Ping G.; Crandall, Carolyn J.; Greendale, Gail A.; Matthews, Karen A.; Thurston, Rebecca C.; Avis, Nancy E.

2016-01-01

Objective Greater body mass index (BMI) and body fat are associated with vasomotor symptoms (VMS). Thus, weight loss may prevent VMS. We analyzed whether concurrent BMI or waist circumference and/or changes in weight or waist circumference predicted incident VMS and whether these relations differed by menopause stage or race/ethnicity. Methods Data from 10 follow-up visits for 1546 participants in the Study of Women's Health Across the Nation who reported no VMS at baseline were modeled for time to first symptomatic visit in relation to concurrent BMI and waist circumference and change in weight and waist circumference during early and late menopause using discrete survival analyses, adjusting for covariates. Results Greater concurrent BMI and waist circumference were significantly related to greater any and frequent (≥6 days in the last two weeks) incident VMS in early menopause and lower VMS risk in late menopause. Percentage weight change since baseline and since the prior visit were unrelated to incident any VMS in either menopause stage. Percentage weight change since baseline had a significant shallow U-shaped association with incident frequent VMS in early menopause (p=0.02), a shallow inverse U-shape in late menopause (p=0.02), and a significant interaction with menopause stage (p=0.004) but not with race/ethnicity. Recent weight change was unassociated with incident VMS in either menopause stage. Results were similar for waist change. Conclusions Concurrent BMI and waist circumference were positively related to incident VMS in early menopause and negatively related in late menopause. Maintaining healthy weight in early menopause may help prevent VMS. PMID:27749738

Longitudinal analysis of changes in weight and waist circumference in relation to incident vasomotor symptoms: the Study of Women's Health Across the Nation (SWAN).

PubMed

Gold, Ellen B; Crawford, Sybil L; Shelton, Janie F; Tepper, Ping G; Crandall, Carolyn J; Greendale, Gail A; Matthews, Karen A; Thurston, Rebecca C; Avis, Nancy E

2017-01-01

Greater body mass index (BMI) and body fat are associated with vasomotor symptoms (VMS). Thus, weight loss may prevent VMS. We analyzed whether concurrent BMI or waist circumference and/or changes in weight or waist circumference predicted incident VMS and whether these relations differed by menopause stage or race/ethnicity. Data from 10 follow-up visits for 1,546 participants in the Study of Women's Health Across the Nation who reported no VMS at baseline were modeled for time to first symptomatic visit in relation to concurrent BMI and waist circumference and change in weight and waist circumference during early and late menopause using discrete survival analyses, adjusting for covariates. Greater concurrent BMI and waist circumference were significantly related to greater any and frequent (≥6 d in the last 2 wk) incident VMS in early menopause and lower VMS risk in late menopause. Percentage weight change since baseline and since the prior visit was unrelated to incident any VMS in either menopause stage. Percentage weight change since baseline had a significant shallow U-shaped association with incident frequent VMS in early menopause (P = 0.02), a shallow inverse U-shape in late menopause (P = 0.02), and a significant interaction with menopause stage (P = 0.004) but not with race/ethnicity. Recent weight change was unassociated with incident VMS in either menopause stage. Results were similar for waist change. Concurrent BMI and waist circumference were positively related to incident VMS in early menopause and negatively related in late menopause. Maintaining healthy weight in early menopause may help prevent VMS.

The role of sleep difficulties in the vasomotor menopausal symptoms and depressed mood relationships: an international pooled analysis of eight studies in the InterLACE consortium.

PubMed

Chung, Hsin-Fang; Pandeya, Nirmala; Dobson, Annette J; Kuh, Diana; Brunner, Eric J; Crawford, Sybil L; Avis, Nancy E; Gold, Ellen B; Mitchell, Ellen S; Woods, Nancy F; Bromberger, Joyce T; Thurston, Rebecca C; Joffe, Hadine; Yoshizawa, Toyoko; Anderson, Debra; Mishra, Gita D

2018-02-12

Many women experience both vasomotor menopausal symptoms (VMS) and depressed mood at midlife, but little is known regarding the prospective bi-directional relationships between VMS and depressed mood and the role of sleep difficulties in both directions. A pooled analysis was conducted using data from 21 312 women (median: 50 years, interquartile range 49-51) in eight studies from the InterLACE consortium. The degree of VMS, sleep difficulties, and depressed mood was self-reported and categorised as never, rarely, sometimes, and often (if reporting frequency) or never, mild, moderate, and severe (if reporting severity). Multivariable logistic regression models were used to examine the bi-directional associations adjusted for within-study correlation. At baseline, the prevalence of VMS (40%, range 13-62%) and depressed mood (26%, 8-41%) varied substantially across studies, and a strong dose-dependent association between VMS and likelihood of depressed mood was found. Over 3 years of follow-up, women with often/severe VMS at baseline were more likely to have subsequent depressed mood compared with those without VMS (odds ratios (OR) 1.56, 1.27-1.92). Women with often/severe depressed mood at baseline were also more likely to have subsequent VMS than those without depressed mood (OR 1.89, 1.47-2.44). With further adjustment for the degree of sleep difficulties at baseline, the OR of having a subsequent depressed mood associated with often/severe VMS was attenuated and no longer significant (OR 1.13, 0.90-1.40). Conversely, often/severe depressed mood remained significantly associated with subsequent VMS (OR 1.80, 1.38-2.34). Difficulty in sleeping largely explained the relationship between VMS and subsequent depressed mood, but it had little impact on the relationship between depressed mood and subsequent VMS.

SURE - SEMI-MARKOV UNRELIABILITY RANGE EVALUATOR (VAX VMS VERSION)

NASA Technical Reports Server (NTRS)

Butler, R. W.

1994-01-01

The Semi-Markov Unreliability Range Evaluator, SURE, is an analysis tool for reconfigurable, fault-tolerant systems. Traditional reliability analyses are based on aggregates of fault-handling and fault-occurrence models. SURE provides an efficient means for calculating accurate upper and lower bounds for the death state probabilities for a large class of semi-Markov models, not just those which can be reduced to critical-pair architectures. The calculated bounds are close enough (usually within 5 percent of each other) for use in reliability studies of ultra-reliable computer systems. The SURE bounding theorems have algebraic solutions and are consequently computationally efficient even for large and complex systems. SURE can optionally regard a specified parameter as a variable over a range of values, enabling an automatic sensitivity analysis. Highly reliable systems employ redundancy and reconfiguration as methods of ensuring operation. When such systems are modeled stochastically, some state transitions are orders of magnitude faster than others; that is, fault recovery is usually faster than fault arrival. SURE takes these time differences into account. Slow transitions are described by exponential functions and fast transitions are modeled by either the White or Lee theorems based on means, variances, and percentiles. The user must assign identifiers to every state in the system and define all transitions in the semi-Markov model. SURE input statements are composed of variables and constants related by FORTRAN-like operators such as =, +, *, SIN, EXP, etc. There are a dozen major commands such as READ, READO, SAVE, SHOW, PRUNE, TRUNCate, CALCulator, and RUN. Once the state transitions have been defined, SURE calculates the upper and lower probability bounds for entering specified death states within a specified mission time. SURE output is tabular. The mathematical approach chosen to solve a reliability problem may vary with the size and nature of the problem. Although different solution techniques are utilized on different programs, it is possible to have a common input language. The Systems Validation Methods group at NASA Langley Research Center has created a set of programs that form the basis for a reliability analysis workstation. The set of programs are: SURE reliability analysis program (COSMIC program LAR-13789, LAR-14921); the ASSIST specification interface program (LAR-14193, LAR-14923), PAWS/STEM reliability analysis programs (LAR-14165, LAR-14920); and the FTC fault tree tool (LAR-14586, LAR-14922). FTC is used to calculate the top-event probability for a fault tree. PAWS/STEM and SURE are programs which interpret the same SURE language, but utilize different solution methods. ASSIST is a preprocessor that generates SURE language from a more abstract definition. SURE, ASSIST, and PAWS/STEM are also offered as a bundle. Please see the abstract for COS-10039/COS-10041, SARA - SURE/ASSIST Reliability Analysis Workstation, for pricing details. SURE was originally developed for DEC VAX series computers running VMS and was later ported for use on Sun computers running SunOS. The VMS version (LAR13789) is written in PASCAL, C-language, and FORTRAN 77. The standard distribution medium for the VMS version of SURE is a 9-track 1600 BPI magnetic tape in VMSINSTAL format. It is also available on a TK50 tape cartridge in VMSINSTAL format. Executables are included. The Sun UNIX version (LAR14921) is written in ANSI C-language and PASCAL. An ANSI compliant C compiler is required in order to compile the C portion of this package. The standard distribution medium for the Sun version of SURE is a .25 inch streaming magnetic tape cartridge in UNIX tar format. Both Sun3 and Sun4 executables are included. SURE was developed in 1988 and last updated in 1992. DEC, VAX, VMS, and TK50 are trademarks of Digital Equipment Corporation. TEMPLATE is a registered trademark of Template Graphics Software, Inc. UNIX is a registered trademark of AT&T Bell Laboratories. Sun3 and Sun4 are trademarks of Sun Microsystems, Inc.

NSSDC activities with 12-inch optical disk drives

NASA Technical Reports Server (NTRS)

Lowrey, Barbara E.; Lopez-Swafford, Brian

1986-01-01

The development status of optical-disk data transfer and storage technology at the National Space Science Data Center (NSSDC) is surveyed. The aim of the R&D program is to facilitate the exchange of large volumes of data. Current efforts focus on a 12-inch 1-Gbyte write-once/read-many disk and a disk drive which interfaces with VAX/VMS computer systems. The history of disk development at NSSDC is traced; the results of integration and performance tests are summarized; the operating principles of the 12-inch system are explained and illustrated with diagrams; and the need for greater standardization is indicated.

DSN Resource Scheduling

NASA Technical Reports Server (NTRS)

Wang, Yeou-Fang; Baldwin, John

2007-01-01

TIGRAS is client-side software, which provides tracking-station equipment planning, allocation, and scheduling services to the DSMS (Deep Space Mission System). TIGRAS provides functions for schedulers to coordinate the DSN (Deep Space Network) antenna usage time and to resolve the resource usage conflicts among tracking passes, antenna calibrations, maintenance, and system testing activities. TIGRAS provides a fully integrated multi-pane graphical user interface for all scheduling operations. This is a great improvement over the legacy VAX VMS command line user interface. TIGRAS has the capability to handle all DSN resource scheduling aspects from long-range to real time. TIGRAS assists NASA mission operations for DSN tracking of station equipment resource request processes from long-range load forecasts (ten years or longer), to midrange, short-range, and real-time (less than one week) emergency tracking plan changes. TIGRAS can be operated by NASA mission operations worldwide to make schedule requests for the DSN station equipment.

Integration of MATLAB Simulink(Registered Trademark) Models with the Vertical Motion Simulator

NASA Technical Reports Server (NTRS)

Lewis, Emily K.; Vuong, Nghia D.

2012-01-01

This paper describes the integration of MATLAB Simulink(Registered TradeMark) models into the Vertical Motion Simulator (VMS) at NASA Ames Research Center. The VMS is a high-fidelity, large motion flight simulator that is capable of simulating a variety of aerospace vehicles. Integrating MATLAB Simulink models into the VMS needed to retain the development flexibility of the MATLAB environment and allow rapid deployment of model changes. The process developed at the VMS was used successfully in a number of recent simulation experiments. This accomplishment demonstrated that the model integrity was preserved, while working within the hard real-time run environment of the VMS architecture, and maintaining the unique flexibility of the VMS to meet diverse research requirements.

Feasibility Study Utilizing Meteor Burst Communications for Vessel Monitoring

DOT National Transportation Integrated Search

1981-01-01

This document discusses the feasibility of using meteor burst communications for monitoring vessel position, in particular the Prince William Sound VMS near Valdez, Alaska. This document describes the equipment and operational performance of meteor b...

Aero/fluids database system

NASA Technical Reports Server (NTRS)

Reardon, John E.; Violett, Duane L., Jr.

1991-01-01

The AFAS Database System was developed to provide the basic structure of a comprehensive database system for the Marshall Space Flight Center (MSFC) Structures and Dynamics Laboratory Aerophysics Division. The system is intended to handle all of the Aerophysics Division Test Facilities as well as data from other sources. The system was written for the DEC VAX family of computers in FORTRAN-77 and utilizes the VMS indexed file system and screen management routines. Various aspects of the system are covered, including a description of the user interface, lists of all code structure elements, descriptions of the file structures, a description of the security system operation, a detailed description of the data retrieval tasks, a description of the session log, and a description of the archival system.

VAXCMS - VAX CONTINUOUS MONITORING SYSTEM, VERSION 2.2

NASA Technical Reports Server (NTRS)

Farkas, L.

1994-01-01

The VAX Continuous Monitoring System (VAXCMS) was developed at NASA Headquarters to aid system managers in monitoring the performance of VAX systems through the generation of graphic images which summarize trends in performance metrics over time. Since its initial development, VAXCMS has been extensively modified at the NASA Lewis Research Center. Data is produced by utilizing the VMS MONITOR utility to collect the performance data, and then feeding the data through custom-developed linkages to the Computer Associates' TELL-A-GRAF computer graphics software to generate the chart images for analysis by the system manager. The VMS ACCOUNTING utility is also utilized to gather interactive process information. The charts that are generated by VAXCMS are: 1) CPU modes for each node over the most recent four month period 2) CPU modes for the cluster as a whole using a weighted average of all the nodes in the cluster based on processing power 3) Percent of primary memory in use for each node over the most recent four month period 4) Interactive processes for all nodes over the most recent four month period 5) Daily, weekly, and monthly, performance summaries for CPU modes, percent of primary memory in use, and page fault rates for each node 6) Daily disk I/O performance data plotting Average Disk I/O Response Time based on I/O Operation Rate and Queue Length. VAXCMS is written in DCL and VAX FORTRAN for use with DEC VAX series computers running VMS 5.1 or later. This program requires the TELL-A-GRAF graphics package in order to generate plots of system data. A FORTRAN compiler is required. The standard distribution medium for VAXCMS is a 9-track 1600 BPI magnetic tape in DEC VAX BACKUP format. It is also available on a TK50 tape cartridge in DEC VAX BACKUP format. An electronic copy of the documentation in ASCII format is included on the distribution medium. Portions of this code are copyrighted by Mr. David Lavery and are distributed with his permission. These portions of the code may not be redistributed commercially.

NASA ARCH- A FILE ARCHIVAL SYSTEM FOR THE DEC VAX

NASA Technical Reports Server (NTRS)

Scott, P. J.

1994-01-01

The function of the NASA ARCH system is to provide a permanent storage area for files that are infrequently accessed. The NASA ARCH routines were designed to provide a simple mechanism by which users can easily store and retrieve files. The user treats NASA ARCH as the interface to a black box where files are stored. There are only five NASA ARCH user commands, even though NASA ARCH employs standard VMS directives and the VAX BACKUP utility. Special care is taken to provide the security needed to insure file integrity over a period of years. The archived files may exist in any of three storage areas: a temporary buffer, the main buffer, and a magnetic tape library. When the main buffer fills up, it is transferred to permanent magnetic tape storage and deleted from disk. Files may be restored from any of the three storage areas. A single file, multiple files, or entire directories can be stored and retrieved. archived entities hold the same name, extension, version number, and VMS file protection scheme as they had in the user's account prior to archival. NASA ARCH is capable of handling up to 7 directory levels. Wildcards are supported. User commands include TEMPCOPY, DISKCOPY, DELETE, RESTORE, and DIRECTORY. The DIRECTORY command searches a directory of savesets covering all three archival areas, listing matches according to area, date, filename, or other criteria supplied by the user. The system manager commands include 1) ARCHIVE- to transfer the main buffer to duplicate magnetic tapes, 2) REPORTto determine when the main buffer is full enough to archive, 3) INCREMENT- to back up the partially filled main buffer, and 4) FULLBACKUP- to back up the entire main buffer. On-line help files are provided for all NASA ARCH commands. NASA ARCH is written in DEC VAX DCL for interactive execution and has been implemented on a DEC VAX computer operating under VMS 4.X. This program was developed in 1985.

Providing Assistive Technology Applications as a Service Through Cloud Computing.

PubMed

Mulfari, Davide; Celesti, Antonio; Villari, Massimo; Puliafito, Antonio

2015-01-01

Users with disabilities interact with Personal Computers (PCs) using Assistive Technology (AT) software solutions. Such applications run on a PC that a person with a disability commonly uses. However the configuration of AT applications is not trivial at all, especially whenever the user needs to work on a PC that does not allow him/her to rely on his / her AT tools (e.g., at work, at university, in an Internet point). In this paper, we discuss how cloud computing provides a valid technological solution to enhance such a scenario.With the emergence of cloud computing, many applications are executed on top of virtual machines (VMs). Virtualization allows us to achieve a software implementation of a real computer able to execute a standard operating system and any kind of application. In this paper we propose to build personalized VMs running AT programs and settings. By using the remote desktop technology, our solution enables users to control their customized virtual desktop environment by means of an HTML5-based web interface running on any computer equipped with a browser, whenever they are.

Eigensystem realization algorithm user's guide forVAX/VMS computers: Version 931216

NASA Technical Reports Server (NTRS)

Pappa, Richard S.

1994-01-01

The eigensystem realization algorithm (ERA) is a multiple-input, multiple-output, time domain technique for structural modal identification and minimum-order system realization. Modal identification is the process of calculating structural eigenvalues and eigenvectors (natural vibration frequencies, damping, mode shapes, and modal masses) from experimental data. System realization is the process of constructing state-space dynamic models for modern control design. This user's guide documents VAX/VMS-based FORTRAN software developed by the author since 1984 in conjunction with many applications. It consists of a main ERA program and 66 pre- and post-processors. The software provides complete modal identification capabilities and most system realization capabilities.

A large multinational study of vasomotor symptom prevalence, duration, and impact on quality of life in middle-aged women.

PubMed

Blümel, Juan E; Chedraui, Peter; Baron, German; Belzares, Emma; Bencosme, Ascanio; Calle, Andres; Danckers, Luis; Espinoza, Maria T; Flores, Daniel; Gomez, Gustavo; Hernandez-Bueno, Jose A; Izaguirre, Humberto; Leon-Leon, Patricia; Lima, Selva; Mezones-Holguin, Edward; Monterrosa, Alvaro; Mostajo, Desire; Navarro, Daysi; Ojeda, Eliana; Onatra, William; Royer, Monique; Soto, Edwin; Tserotas, Konstantinos; Vallejo, Soledad

2011-07-01

The aim of this study was to determine vasomotor symptom (VMS) prevalence, duration, and impact on quality of life in middle-aged women using a validated menopausal tool. The Menopause Rating Scale (MRS) and an itemized questionnaire containing personal sociodemographic data were used to examine 8,373 women aged 40 to 59 years from 22 healthcare centers in 12 Latin American countries. Less than half (48.8%) of all women studied were postmenopausal, 14.7% used hormone therapy (HT), 54.5% presented VMS of any degree, and 9.6% presented severe/bothersome symptoms. The rate of VMS (any degree) significantly increased from one menopausal stage to the next. HT users presented more VMS (any degree) than did nonusers (58.6% vs 53.8%, P = 0.001). When surgical postmenopausal women were compared, non-HT users displayed a higher prevalence of severe VMS (16.1% vs 9.0%, P = 0.0001). The presence of VMS of any degree was related to a more impaired quality of life (higher total MRS score; odds ratio, 4.7; 95% CI, 4.1-5.3). This effect was even higher among women presenting severe VMS. Logistic regression analysis determined that the presence of severe psychological/urogenital symptoms (MRS), lower educational level, natural perimenopause-postmenopause status, nulliparity, surgical menopause, and living at high altitude were significant risk factors for severe VMS. HT use was related to a lower risk. A second regression model determined that surgical menopause, intense psychological/urogenital symptoms, and a history of psychiatric consultation were factors related to severe VMS persisting into the late postmenopausal stage (5 or more years). In this Latin American middle-aged series, VMS prevalence was high, persisting into the late postmenopausal phase in a high rate and severely impairing quality of life. HT use was related to a lower risk of severe VMS.

State-of-the-art of recycling e-wastes by vacuum metallurgy separation.

PubMed

Zhan, Lu; Xu, Zhenming

2014-12-16

In recent era, more and more electric and electronic equipment wastes (e-wastes) are generated that contain both toxic and valuable materials in them. Most studies focus on the extraction of valuable metals like Au, Ag from e-wastes. However, the recycling of metals such as Pb, Cd, Zn, and organics has not attracted enough attentions. Vacuum metallurgy separation (VMS) processes can reduce pollution significantly using vacuum technique. It can effectively recycle heavy metals and organics from e-wastes in an environmentally friendly way, which is beneficial for both preventing the heavy metal contaminations and the sustainable development of resources. VMS can be classified into several methods, such as vacuum evaporation, vacuum carbon reduction and vacuum pyrolysis. This paper respectively reviews the state-of-art of these methods applied to recycling heavy metals and organics from several kinds of e-wastes. The method principle, equipment used, separating process, optimized operating parameters and recycling mechanism of each case are illustrated in details. The perspectives on the further development of e-wastes recycling by VMS are also presented.

Is an unfavourable cardiovascular risk profile a risk factor for vasomotor menopausal symptoms? Results of a population-based cohort study.

PubMed

van den Berg, M J; Herber-Gast, G C M; van der Schouw, Y T

2015-08-01

Evidence suggests an association between vasomotor menopausal symptoms (VMSs), i.e. hot flushes and night sweats, and cardiovascular disease. However, the causal pathway is unclear. We investigated whether an unfavourable cardiovascular risk profile is a risk factor for VMS later in life. Retrospective cohort study. Women aged 50-70 from the general population. The Prospect-European Prospective Investigation into Cancer and Nutrition (Prospect-EPIC) cohort is a population-based cohort of women who enrolled between 1993 and 1997. Follow-up questionnaires were sent at 5-year intervals for 15 years. Women who returned the third questionnaire, answered questions regarding lifetime VMS and did not report VMS prior to baseline were included in this study (n = 1295). At baseline, the Framingham Risk Score (FRS) was determined. We used logistic regression analysis to calculate odds ratios (ORs) for the association between baseline FRS and incident VMS. Incident VMS. At baseline (mean age ± standard deviation, 52.2 ± 3.6 years), 21.2% had a FRS > 10%. During follow-up, 40.2% of women reported the onset of VMS. Adjusted for body mass index, physical activity, education and alcohol consumption, each point increase in FRS was associated with a decreased incidence of VMS [OR, 0.94 (95% CI, 0.91-0.97)]. Additional adjustment for menopausal status attenuated the OR to null [OR, 0.98 (95% CI, 0.95-1.01)]. None of the separate FRS variables were associated with VMS after adjustment for age. In our cohort, an unfavourable cardiovascular risk profile was not associated with VMS, and therefore we found no evidence for the involvement of a vascular mechanism in the etiology of VMS. © 2014 Royal College of Obstetricians and Gynaecologists.

Effectiveness of Adaptive Statistical Iterative Reconstruction for 64-Slice Dual-Energy Computed Tomography Pulmonary Angiography in Patients With a Reduced Iodine Load: Comparison With Standard Computed Tomography Pulmonary Angiography.

PubMed

Lee, Ji Won; Lee, Geewon; Lee, Nam Kyung; Moon, Jin Il; Ju, Yun Hye; Suh, Young Ju; Jeong, Yeon Joo

2016-01-01

The aim of the study was to assess the effectiveness of the adaptive statistical iterative reconstruction (ASIR) for dual-energy computed tomography pulmonary angiography (DE-CTPA) with a reduced iodine load. One hundred forty patients referred for chest CT were randomly divided into a DE-CTPA group with a reduced iodine load or a standard CTPA group. Quantitative and qualitative image qualities of virtual monochromatic spectral (VMS) images with filtered back projection (VMS-FBP) and those with 50% ASIR (VMS-ASIR) in the DE-CTPA group were compared. Image qualities of VMS-ASIR images in the DE-CTPA group and ASIR images in the standard CTPA group were also compared. All quantitative and qualitative indices, except attenuation value of pulmonary artery in the VMS-ASIR subgroup, were superior to those in the VMS-FBP subgroup (all P < 0.001). Noise and signal-to-noise ratio of VMS-ASIR images were superior to those of ASIR images in the standard CTPA group (P < 0.001 and P = 0.007, respectively). Regarding qualitative indices, noise was significantly lower in VMS-ASIR images of the DE-CTPA group than in ASIR images of the standard CTPA group (P = 0.001). The ASIR technique tends to improve the image quality of VMS imaging. Dual-energy computed tomography pulmonary angiography with ASIR can reduce contrast medium volume and produce images of comparable quality with those of standard CTPA.

Ada Compiler Validation Summary Report: Certificate Number: 901212I1. 11120 Tartan Inc., Tartan Ada VMS/960MC Version 4.0 VAXstation 3100 = Intel ICE960/25 on an VMS 5.2 Intel EXV80960MC Board

DTIC Science & Technology

1991-01-09

5.2 (Target), 90121211 .11120 6. AUTHOR( S ) IABG-AVFT IOttobrunn, Federal Republic of Germany 7 PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES) N-1...FEDERAL REPUBLIC OF GERMANY 9 SPONSORINGMONITORING AGENCY NAME( S ) AND ADDRESS( ES) 10. SPONSORING/ONITORING AGENCY Ada Joint Program Office REPORT NUMBER...Ada implementacion for which validation status is realized. Host Computer A computer system where Ada source programs are transformec System into

Vitamin and mineral supplement users. Do they have healthy or unhealthy dietary behaviours?

PubMed

van der Horst, Klazine; Siegrist, Michael

2011-12-01

It is unknown whether people use vitamin and mineral supplements (VMS) to compensate for unhealthy diets, or people whom already have a healthy diet use VMS. Therefore, this study aimed to examine correlates of VMS use and whether VMS users can be categorised into specific clusters based on dietary lifestyle variables. The data used came from the Swiss Food Panel questionnaire for 2010. The sample consisted of 6189 respondents, mean age was 54 years and 47.6% were males. Data was analysed with logistic regression analysis and hierarchical cluster analysis. The results revealed that for VMS use, gender, age, education, chronic illness, health consciousness, benefits of fortification, convenience food and sugar-sweetened beverage consumption were of importance. Cluster analysis revealed three clusters (1) healthy diet, (2) unhealthy diet and (3) modest diet. Compared to non-users a higher percentage of VMS users was categorised in the healthy cluster and a lower percentage in the unhealthy cluster. More VMS-users were categorised as having an unhealthy diet (31.4%) than having a healthy diet (20.6%). The results suggest that both hypotheses-VMS are used by people with unhealthy diets and by people who least need them-hold true meaning. Copyright © 2011. Published by Elsevier Ltd.

Effects of intrusions on grades and contents of gold and other metals in volcanogenic massive sulfide deposits

USGS Publications Warehouse

Singer, Donald A.; Berger, Vladimir; Mosier, Dan L.

2011-01-01

The reason some VMS deposits contain more gold or other metals than others might be due to the influence of intrusions. A new approach examining this possibility is based on examining the information about many VMS deposits to test statistically if those with associated intrusions have significantly different grades or amounts of metals. A set of 632 VMS deposits with reported grades, tonnages, and information about the observed presence or absence of subvolcanic or plutonic intrusive bodies emplaced at or after VMS mineralization is statistically analyzed.Deposits with syn-mineralization or post-mineralization intrusions nearby have higher tonnages than deposits without reported intrusions, but the differences are not statistically significant. When both kinds of intrusions are reported, VMS deposit sizes are significantly higher than in the deposits without any intrusions. Gold, silver, zinc, lead, and copper average grades are not significantly different in the VMS deposits with nearby intrusions compared to deposits without regardless of relative age of intrusive. Only zinc and copper contents are significantly higher in VMS deposits with both kinds of intrusive reported. These differences in overall metal content are due to significantly larger deposit sizes of VMS deposits where both intrusive kinds are observed and reported, rather than any difference in metal grades.

Software fault tolerance in computer operating systems

NASA Technical Reports Server (NTRS)

Iyer, Ravishankar K.; Lee, Inhwan

1994-01-01

This chapter provides data and analysis of the dependability and fault tolerance for three operating systems: the Tandem/GUARDIAN fault-tolerant system, the VAX/VMS distributed system, and the IBM/MVS system. Based on measurements from these systems, basic software error characteristics are investigated. Fault tolerance in operating systems resulting from the use of process pairs and recovery routines is evaluated. Two levels of models are developed to analyze error and recovery processes inside an operating system and interactions among multiple instances of an operating system running in a distributed environment. The measurements show that the use of process pairs in Tandem systems, which was originally intended for tolerating hardware faults, allows the system to tolerate about 70% of defects in system software that result in processor failures. The loose coupling between processors which results in the backup execution (the processor state and the sequence of events occurring) being different from the original execution is a major reason for the measured software fault tolerance. The IBM/MVS system fault tolerance almost doubles when recovery routines are provided, in comparison to the case in which no recovery routines are available. However, even when recovery routines are provided, there is almost a 50% chance of system failure when critical system jobs are involved.

The Incidence and Fate of Volatile Methyl Siloxanes in a Crewed Spacecraft Cabin

NASA Technical Reports Server (NTRS)

Perry, Jay L.; Kayatin, Matthew J.

2017-01-01

Volatile methyl siloxanes (VMS) arise from diverse, pervasive sources aboard crewed spacecraft ranging from materials offgassing to volatilization from personal care products. These sources lead to a persistent VMS compound presence in the cabin environment that must be considered for robust life support system design. Volatile methyl siloxane compound stability in the cabin environment presents an additional technical issue because degradation products such as dimethylsilanediol (DMSD) are highly soluble in water leading to a unique load challenge for water purification processes. The incidence and fate of VMS compounds as observed in the terrestrial atmosphere, water, and surface (soil) environmental compartments have been evaluated as an analogy for a crewed cabin environment. Volatile methyl siloxane removal pathways aboard crewed spacecraft are discussed and a material balance accounting for a DMSD production mechanism consistent with in-flight observations is presented.

Reduction of metal artifacts from unilateral hip arthroplasty on dual-energy CT with metal artifact reduction software.

PubMed

Yue, Dong; Fan Rong, Cheng; Ning, Cai; Liang, Hu; Ai Lian, Liu; Ru Xin, Wang; Ya Hong, Luo

2018-07-01

Background The evaluation of hip arthroplasty is a challenge in computed tomography (CT). The virtual monochromatic spectral (VMS) images with metal artifact reduction software (MARs) in spectral CT can reduce the artifacts and improve the image quality. Purpose To evaluate the effects of VMS images and MARs for metal artifact reduction in patients with unilateral hip arthroplasty. Material and Methods Thirty-five patients underwent dual-energy CT. Four sets of VMS images without MARs and four sets of VMS images with MARs were obtained. Artifact index (AI), CT number, and SD value were assessed at the periprosthetic region and the pelvic organs. The scores of two observers for different images and the inter-observer agreement were evaluated. Results The AIs in 120 and 140 keV images were significantly lower than those in 80 and 100 keV images. The AIs of the periprosthetic region in VMS images with MARs were significantly lower than those in VMS images without MARs, while the AIs of pelvic organs were not significantly different. VMS images with MARs improved the accuracy of CT numbers for the periprosthetic region. The inter-observer agreements were good for all the images. VMS images with MARs at 120 and 140 keV had higher subjective scores and could improve the image quality, leading to reliable diagnosis of prosthesis-related problems. Conclusion VMS images with MARs at 120 and 140 keV could significantly reduce the artifacts from hip arthroplasty and improve the image quality at the periprosthetic region but had no obvious advantage for pelvic organs.

Runaway Massive Stars from R136: VFTS 682 is Very Likely a "Slow Runaway"

NASA Astrophysics Data System (ADS)

Banerjee, Sambaran; Kroupa, Pavel; Oh, Seungkyung

2012-02-01

We conduct a theoretical study on the ejection of runaway massive stars from R136—the central massive, starburst cluster in the 30 Doradus complex of the Large Magellanic Cloud. Specifically, we investigate the possibility of the very massive star (VMS) VFTS 682 being a runaway member of R136. Recent observations of the above VMS, by virtue of its isolated location and its moderate peculiar motion, have raised the fundamental question of whether isolated massive star formation is indeed possible. We perform the first realistic N-body computations of fully mass-segregated R136-type star clusters in which all the massive stars are in primordial binary systems. These calculations confirm that the dynamical ejection of a VMS from an R136-like cluster, with kinematic properties similar to those of VFTS 682, is common. Hence, the conjecture of isolated massive star formation is unnecessary to account for this VMS. Our results are also quite consistent with the ejection of 30 Dor 016, another suspected runaway VMS from R136. We further note that during the clusters' evolution, mergers of massive binaries produce a few single stars per cluster with masses significantly exceeding the canonical upper limit of 150 M ⊙. The observations of such single super-canonical stars in R136, therefore, do not imply an initial mass function with an upper limit greatly exceeding the accepted canonical 150 M ⊙ limit, as has been suggested recently, and they are consistent with the canonical upper limit.

Efficiently Scheduling Multi-core Guest Virtual Machines on Multi-core Hosts in Network Simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoginath, Srikanth B; Perumalla, Kalyan S

2011-01-01

Virtual machine (VM)-based simulation is a method used by network simulators to incorporate realistic application behaviors by executing actual VMs as high-fidelity surrogates for simulated end-hosts. A critical requirement in such a method is the simulation time-ordered scheduling and execution of the VMs. Prior approaches such as time dilation are less efficient due to the high degree of multiplexing possible when multiple multi-core VMs are simulated on multi-core host systems. We present a new simulation time-ordered scheduler to efficiently schedule multi-core VMs on multi-core real hosts, with a virtual clock realized on each virtual core. The distinguishing features of ourmore » approach are: (1) customizable granularity of the VM scheduling time unit on the simulation time axis, (2) ability to take arbitrary leaps in virtual time by VMs to maximize the utilization of host (real) cores when guest virtual cores idle, and (3) empirically determinable optimality in the tradeoff between total execution (real) time and time-ordering accuracy levels. Experiments show that it is possible to get nearly perfect time-ordered execution, with a slight cost in total run time, relative to optimized non-simulation VM schedulers. Interestingly, with our time-ordered scheduler, it is also possible to reduce the time-ordering error from over 50% of non-simulation scheduler to less than 1% realized by our scheduler, with almost the same run time efficiency as that of the highly efficient non-simulation VM schedulers.« less

Finding Tropical Cyclones on a Cloud Computing Cluster: Using Parallel Virtualization for Large-Scale Climate Simulation Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hasenkamp, Daren; Sim, Alexander; Wehner, Michael

Extensive computing power has been used to tackle issues such as climate changes, fusion energy, and other pressing scientific challenges. These computations produce a tremendous amount of data; however, many of the data analysis programs currently only run a single processor. In this work, we explore the possibility of using the emerging cloud computing platform to parallelize such sequential data analysis tasks. As a proof of concept, we wrap a program for analyzing trends of tropical cyclones in a set of virtual machines (VMs). This approach allows the user to keep their familiar data analysis environment in the VMs, whilemore » we provide the coordination and data transfer services to ensure the necessary input and output are directed to the desired locations. This work extensively exercises the networking capability of the cloud computing systems and has revealed a number of weaknesses in the current cloud system software. In our tests, we are able to scale the parallel data analysis job to a modest number of VMs and achieve a speedup that is comparable to running the same analysis task using MPI. However, compared to MPI based parallelization, the cloud-based approach has a number of advantages. The cloud-based approach is more flexible because the VMs can capture arbitrary software dependencies without requiring the user to rewrite their programs. The cloud-based approach is also more resilient to failure; as long as a single VM is running, it can make progress while as soon as one MPI node fails the whole analysis job fails. In short, this initial work demonstrates that a cloud computing system is a viable platform for distributed scientific data analyses traditionally conducted on dedicated supercomputing systems.« less

Vasomotor symptoms: viewpoint from the Indian subcontinent and management of a common menopausal problem.

PubMed

Shah, Duru; Agrawal, Sangeeta

2010-09-01

Vasomotor symptoms (VMS) are recognized to adversely affect the quality of life. The prevalence and the magnitude of VMS may vary across populations. Although a natural regression of VMS may be expected over a period of time, it remains the most common of symptoms for which women seek help. Menopausal hormone therapy (MHT) is currently the only treatment approved by the Food and Drug Administration that has shown uniform benefit in the management of VMS. In clinical situations when estrogen is or may be contraindicated, a finite number of alternative options, including use of neuroactive agents (SSRIs, SSNRs, and gabapentin), lifestyle changes, and nonprescription remedies such as phytoestrogens and black cohosh have been shown to provide relief, albeit with mixed results and questionable safety. Existing data identify an ethnic variation in the degree and frequency of VMS of aging; in this latter context, the Asian woman's perspective is dominantly conveyed from the perspective of Chinese and Japanese ethnicities, whereas data regarding the magnitude of burden of VMS in the postmenopausal women from other Asian ethnicities and races are sparse. This article reviews the symptoms and relates that VMS are of significant concern for the aging Asian women. © Thieme Medical Publishers.

ADAMS: AIRLAB data management system user's guide

NASA Technical Reports Server (NTRS)

Conrad, C. L.; Ingogly, W. F.; Lauterbach, L. A.

1986-01-01

The AIRLAB Data Management System (ADAMS) is an online environment that supports research at NASA's AIRLAB. ADAMS provides an easy to use interactive interface that eases the task of documenting and managing information about experiments and improves communication among project members. Data managed by ADAMS includes information about experiments, data sets produced, software and hardware available in AIRLAB as well as that used in a particular experiment, and an on-line engineer's notebook. The User's Guide provides an overview of the ADAMS system as well as details of the operations available within ADAMS. A tutorial section takes the user step-by-step through a typical ADAMS session. ADAMS runs under the VAX/VMS operating system and uses the ORACLE database management system and DEC/FMS (the Forms Management System). ADAMS can be run from any VAX connected via DECnet to the ORACLE host VAX. The ADAMS system is designed for simplicity, so interactions within the underlying data management system and communications network are hidden from the user.

Impact of the severity of vasomotor symptoms on health status, resource use, and productivity.

PubMed

Whiteley, Jennifer; Wagner, Jan-Samuel; Bushmakin, Andrew; Kopenhafer, Lewis; Dibonaventura, Marco; Racketa, Jill

2013-05-01

The current study characterizes health-related quality of life, work productivity, and resource use among postmenopausal women by severity of vasomotor symptoms (VMS). Participants were selected from the 2010 US National Health and Wellness Survey. Women aged 40 to 75 years who did not report a history of menstrual bleeding or spotting for 1 year were eligible for analysis (N = 3,267). Cohorts of women with no VMS (n = 1,740), mild VMS (n = 931), moderate VMS (n = 462), and severe VMS (n = 134) were compared after controlling for demographic and health characteristics. Outcome measures were assessed using linear models and included health status, work productivity within the past 7 days, and healthcare resource use within the past 6 months. The mean age of women experiencing severe VMS was 57.92 years. After demographic and health characteristics had been controlled for, women experiencing severe and moderate VMS reported significantly lower mean health status scores compared with women with no symptoms (P < 0.0001). The mean number of menopause symptom-related physician visits was significantly greater among women with severe, moderate, or mild symptoms than among women with no symptoms (P < 0.0001). Among employed women experiencing VMS, women with severe and moderate symptoms had adjusted presenteeism of 24.28% and 14.3%, versus 4.33% in women with mild symptoms (P < 0.001), and activities of daily living impairment of 31.66% and 17.06%, versus 6.16% in women with mild symptoms (P < 0.0001). In postmenopausal women, a greater severity of VMS is significantly associated with lower levels of health status and work productivity, and greater healthcare resource use.

Diode laser to treat small oral vascular malformations: A prospective case series study.

PubMed

Bacci, Christian; Sacchetto, Luca; Zanette, Gastone; Sivolella, Stefano

2018-02-01

The current work examined a consecutive series of patients presenting vascular malformations (VMs) and venous lakes (VLs) of the lip and oral mucosa who were treated with transmucosal diode laser applications and assessed over a 1 year period. Fifty-nine patients (31 males and 28 females) presenting low-flow VMs or VLs of the oral cavity were treated transmucosally using a diode laser (with an 830 nm operating wavelength and 1.6 W output power) with a 320 µm diameter flexible fiber. All the lesions were assessed 7 days, 30 days, and 1 year after the laser treatment, and the lesion reduction percentage was scored on a one to five scale. The patients were also asked to assess their pain perception daily during the 7 days following the treatment using a visual analog scale (VAS). There were no procedure-related intra- or post-operative complications; only modest pain intensity was reported. Thirty days after the treatment, lesion reduction was described as excellent or good in 52 cases; it was fair or poor in 7. Six patients (F:M ratio 2:4) required a second diode laser application. At the 1 year follow-up, volume reduction was complete in 48 out of 59 patients; there were five recurrences (F:M ratio 3:2). No relevant gender-related differences were noted. The use of diode laser application to treat small oral VMs and VLs was associated to shorter operating times and fewer postoperative complications with respect to the scapel surgery approach. More than one session may nevertheless be required if the anomaly is larger than 10 mm. Lasers Surg. Med. 50:111-116, 2018. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Cross Matching of VIIRS Boat Detection and Vessel Monitoring System Tracks

NASA Astrophysics Data System (ADS)

Hsu, F. C.; Elvidge, C.; Zhizhin, M. N.; Baugh, K.; Ghosh, T.

2016-12-01

One approach to commercial fishing is to use use bright lights at night to attract catch. This is a widely used practice in East and Southeast Asia, but can also be found in other fisheries. In some cases, the deployed lighting exceeds 100,000 watts. Such lighting is distinctive in dark ocean and can even be seen from space with sensor such as Visible Infrared Imaging Radiometer Suite Day/Night Band (VIIRS-DNB). We have developed a VIIRS Boat Detection (VBD) system, which outputs lists of boat locations in near real time. One of the standard methods fishery agencies use to collect geospatial data on fishing boats is to require boats to carry Vessel Monitoring System beacons. We developed an algorithm to cross-match VBD data with VMS tracks. With this we are able to identify fishing boats that do not carry VMS beacons. In certain situations, this is an indicator of illegal fishing. The other application for this cross-matching is to define the VIIRS detection limits and developing a calibration to estimate deployed wattage. Here we demonstrate results of cross matching VBD and VMS for Indonesia as example to showcase its potential.

Runtime Performance and Virtual Network Control Alternatives in VM-Based High-Fidelity Network Simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoginath, Srikanth B; Perumalla, Kalyan S; Henz, Brian J

2012-01-01

In prior work (Yoginath and Perumalla, 2011; Yoginath, Perumalla and Henz, 2012), the motivation, challenges and issues were articulated in favor of virtual time ordering of Virtual Machines (VMs) in network simulations hosted on multi-core machines. Two major components in the overall virtualization challenge are (1) virtual timeline establishment and scheduling of VMs, and (2) virtualization of inter-VM communication. Here, we extend prior work by presenting scaling results for the first component, with experiment results on up to 128 VMs scheduled in virtual time order on a single 12-core host. We also explore the solution space of design alternatives formore » the second component, and present performance results from a multi-threaded, multi-queue implementation of inter-VM network control for synchronized execution with VM scheduling, incorporated in our NetWarp simulation system.« less

50 CFR 660.719 - Scientific observers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... communications equipment and navigation equipment as necessary to perform observer duties. (4) Allowing the observer access to VMS units to verify operation, obtain data, and use the communication capabilities of... loran coordinates, upon request by the observer. (6) Providing sea turtle, marine mammal, or sea bird...

Development of Handling Qualities Criteria for Rotorcraft with Externally Slung Loads

NASA Technical Reports Server (NTRS)

Hoh, Roger H.; Heffley, Robert K.; Mitchell, David G.

2006-01-01

Piloted simulations were performed on the NASA-Ames Vertical Motion Simulator (VMS) to explore handling qualities issues for large cargo helicopters, particularly focusing on external slung load operations. The purpose of this work was based upon the need to include handling qualities criteria for cargo helicopters in an upgrade to the U.S. Army's rotorcraft handling qualities specification, Aeronautical Design Standard-33 (ADS-33E-PRF). From the VMS results, handling qualities criteria were developed fro cargo helicopters carrying external slung loads in the degraded visual environment (DVE). If satisfied, these criteria provide assurance that the handling quality rating (HQR) will be 4 or better for operations in the DVE, and with a load mass ratio of 0.33 or less. For lighter loads, flying qualities were found to be less dependent on the load geometry and therefore the significance of the criteria is less. For heavier loads, meeting the criteria ensures the best possible handling qualities, albeit Level 2 for load mass ratios greater than 0.33.

RUNAWAY MASSIVE STARS FROM R136: VFTS 682 IS VERY LIKELY A 'SLOW RUNAWAY'

DOE Office of Scientific and Technical Information (OSTI.GOV)

Banerjee, Sambaran; Kroupa, Pavel; Oh, Seungkyung, E-mail: sambaran@astro.uni-bonn.de, E-mail: pavel@astro.uni-bonn.de, E-mail: skoh@astro.uni-bonn.de

2012-02-10

We conduct a theoretical study on the ejection of runaway massive stars from R136-the central massive, starburst cluster in the 30 Doradus complex of the Large Magellanic Cloud. Specifically, we investigate the possibility of the very massive star (VMS) VFTS 682 being a runaway member of R136. Recent observations of the above VMS, by virtue of its isolated location and its moderate peculiar motion, have raised the fundamental question of whether isolated massive star formation is indeed possible. We perform the first realistic N-body computations of fully mass-segregated R136-type star clusters in which all the massive stars are in primordialmore » binary systems. These calculations confirm that the dynamical ejection of a VMS from an R136-like cluster, with kinematic properties similar to those of VFTS 682, is common. Hence, the conjecture of isolated massive star formation is unnecessary to account for this VMS. Our results are also quite consistent with the ejection of 30 Dor 016, another suspected runaway VMS from R136. We further note that during the clusters' evolution, mergers of massive binaries produce a few single stars per cluster with masses significantly exceeding the canonical upper limit of 150 M{sub Sun }. The observations of such single super-canonical stars in R136, therefore, do not imply an initial mass function with an upper limit greatly exceeding the accepted canonical 150 M{sub Sun} limit, as has been suggested recently, and they are consistent with the canonical upper limit.« less

50 CFR 648.9 - VMS vendor and unit requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 50 Wildlife and Fisheries 12 2013-10-01 2013-10-01 false VMS vendor and unit requirements. 648.9 Section 648.9 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE FISHERIES OF THE NORTHEASTERN UNITED STATES General Provisions § 648.9 VMS...

PyGirl: Generating Whole-System VMs from High-Level Prototypes Using PyPy

NASA Astrophysics Data System (ADS)

Bruni, Camillo; Verwaest, Toon

Virtual machines (VMs) emulating hardware devices are generally implemented in low-level languages for performance reasons. This results in unmaintainable systems that are difficult to understand. In this paper we report on our experience using the PyPy toolchain to improve the portability and reduce the complexity of whole-system VM implementations. As a case study we implement a VM prototype for a Nintendo Game Boy, called PyGirl, in which the high-level model is separated from low-level VM implementation issues. We shed light on the process of refactoring from a low-level VM implementation in Java to a high-level model in RPython. We show that our whole-system VM written with PyPy is significantly less complex than standard implementations, without substantial loss in performance.

VMS-ROT: A New Module of the Virtual Multifrequency Spectrometer for Simulation, Interpretation, and Fitting of Rotational Spectra

PubMed Central

2017-01-01

The Virtual Multifrequency Spectrometer (VMS) is a tool that aims at integrating a wide range of computational and experimental spectroscopic techniques with the final goal of disclosing the static and dynamic physical–chemical properties “hidden” in molecular spectra. VMS is composed of two parts, namely, VMS-Comp, which provides access to the latest developments in the field of computational spectroscopy, and VMS-Draw, which provides a powerful graphical user interface (GUI) for an intuitive interpretation of theoretical outcomes and a direct comparison to experiment. In the present work, we introduce VMS-ROT, a new module of VMS that has been specifically designed to deal with rotational spectroscopy. This module offers an integrated environment for the analysis of rotational spectra: from the assignment of spectral transitions to the refinement of spectroscopic parameters and the simulation of the spectrum. While bridging theoretical and experimental rotational spectroscopy, VMS-ROT is strongly integrated with quantum-chemical calculations, and it is composed of four independent, yet interacting units: (1) the computational engine for the calculation of the spectroscopic parameters that are employed as a starting point for guiding experiments and for the spectral interpretation, (2) the fitting-prediction engine for the refinement of the molecular parameters on the basis of the assigned transitions and the prediction of the rotational spectrum of the target molecule, (3) the GUI module that offers a powerful set of tools for a vis-à-vis comparison between experimental and simulated spectra, and (4) the new assignment tool for the assignment of experimental transitions in terms of quantum numbers upon comparison with the simulated ones. The implementation and the main features of VMS-ROT are presented, and the software is validated by means of selected test cases ranging from isolated molecules of different sizes to molecular complexes. VMS-ROT therefore offers an integrated environment for the analysis of the rotational spectra, with the innovative perspective of an intimate connection to quantum-chemical calculations that can be exploited at different levels of refinement, as an invaluable support and complement for experimental studies. PMID:28742339

CARE 3 user-friendly interface user's guide

NASA Technical Reports Server (NTRS)

Martensen, A. L.

1987-01-01

CARE 3 predicts the unreliability of highly reliable reconfigurable fault-tolerant systems that include redundant computers or computer systems. CARE3MENU is a user-friendly interface used to create an input for the CARE 3 program. The CARE3MENU interface has been designed to minimize user input errors. Although a CARE3MENU session may be successfully completed and all parameters may be within specified limits or ranges, the CARE 3 program is not guaranteed to produce meaningful results if the user incorrectly interprets the CARE 3 stochastic model. The CARE3MENU User Guide provides complete information on how to create a CARE 3 model with the interface. The CARE3MENU interface runs under the VAX/VMS operating system.

Definition and testing of the hydrologic component of the pilot land data system

NASA Technical Reports Server (NTRS)

Ragan, Robert M.; Sircar, Jayanta K.

1987-01-01

The specific aim was to develop within the Pilot Land Data System (PLDS) software design environment, an easily implementable and user friendly geometric correction procedure to readily enable the georeferencing of imagery data from the Advanced Very High Resolution Radiometer (AVHRR) onboard the NOAA series spacecraft. A software subsystem was developed within the guidelines set by the PLDS development environment utilizing NASA Goddard Space Flight Center (GSFC) Image Analysis Facility's (IAF's) Land Analysis Software (LAS) coding standards. The IAS current program development environment, the Transportable Applications Executive (TAE), operates under a VAX VMS operating system and was used as the user interface. A brief overview of the ICARUS algorithm that was implemented in the set of functions developed, is provided. The functional specifications decription is provided, and a list of the individual programs and directory names containing the source and executables installed in the IAF system are listed. A user guide is provided for the LAS system documentation format for the three functions developed.

The Cdc48 Protein and Its Cofactor Vms1 Are Involved in Cdc13 Protein Degradation*

PubMed Central

Baek, Guem Hee; Cheng, Haili; Kim, Ikjin; Rao, Hai

2012-01-01

Vms1 is a newly identified Cdc48-binding protein. The biological function of Vms1 remains obscure. Here, we show that both Cdc48 and Vms1, but not Cdc48 cofactors Ufd1 and Ufd2, are crucial for the degradation of Cdc13, a telomere regulator. Interestingly, both autophagy and the proteasome are involved in Cdc13 turnover. Toxicity associated with accumulation of large amounts of Cdc13 in vms1Δ or autophagy mutants underscores the significance of the proteolytic regulation of Cdc13. Because few ubiquitylated yeast proteins are known to be degraded by autophagy under non-stress conditions, the identification of Cdc13 as a target of autophagy provides a valuable tool to unravel the mechanism of autophagy-mediated selective protein degradation. PMID:22718752

Association of genetic variation in the tachykinin receptor 3 locus with hot flashes and night sweats in the Women's Health Initiative Study.

PubMed

Crandall, Carolyn J; Manson, JoAnn E; Hohensee, Chancellor; Horvath, Steve; Wactawski-Wende, Jean; LeBlanc, Erin S; Vitolins, Mara Z; Nassir, Rami; Sinsheimer, Janet S

2017-03-01

Vasomotor symptoms (VMS, ie, hot flashes or night sweats) are reported by many, but not all, women. The extent to which VMS are genetically determined is unknown. We evaluated the relationship of genetic variation and VMS. In this observational study, we accessed data from three genome-wide association studies (GWAS) (SNP Health Association Resource cohort [SHARe], WHI Memory Study cohort [WHIMS+], and Genome-Wide Association Studies of Treatment Response in Randomized Clinical Trials [GARNET] studies, total n = 17,695) of European American, African American, and Hispanic American postmenopausal women aged 50 to 79 years at baseline in the Women's Health Initiative Study. We examined genetic variation in relation to VMS (yes/no) in each study and using trans-ethnic inverse variance fixed-effects meta-analysis. A total of 11,078,977 single-nucleotide polymorphisms (SNPs) met the quality criteria. After adjustment for covariates and population structure, three SNPs (on chromosomes 3 and 11) were associated with VMS at the genome-wide threshold of 5 × 10 in the African American SHARe GWAS, but were not associated in the other cohorts. In the meta-analysis, 14 SNPs, all located on chromosome 4 in the tachykinin receptor 3 (TACR3) locus, however, had P < 5 × 10. These SNPs' effect sizes were similar across studies/participants' ancestry (odds ratio ∼1.5). Genetic variation in TACR3 may contribute to the risk of VMS. To our knowledge, this is the first GWAS to examine SNPs associated with VMS. These results support the biological hypothesis of a role for TACR3 in VMS, which was previously hypothesized from animal and human studies. Further study of these variants may lead to new insights into the biological pathways involved in VMS, which are poorly understood.

A cross-sectional study of equol producer status and self-reported vasomotor symptoms.

PubMed

Newton, Katherine M; Reed, Susan D; Uchiyama, Shigeto; Qu, Conghui; Ueno, Tomomi; Iwashita, Soh; Gunderson, Gabrielle; Fuller, Sharon; Lampe, Johanna W

2015-05-01

This study aims to evaluate the associations of vasomotor symptom (VMS) frequency, bother, and severity with equol producer status and dietary daidzein intake. This is an observational study. This study included women aged 45 to 55 years, in postmenopause or in the menopausal transition, who had soy food intake of three or more servings per week. Exclusion criteria included severe concurrent disease, pregnancy or planned pregnancy, and current use of oral or transdermal hormones or selective estrogen receptor modulators. After screening, 375 participants completed a 3-day VMS diary and a 24-hour urine collection. Women with a urine daidzein or genistein concentration of 100 ng/mL or higher were included. We evaluated the association of VMS--dichotomized as lower than or equal to versus higher than the mean number of VMS per day (<2.33, ≥ 2.33)--with quartiles of daidzein intake. Overall, 129 (35%) of 365 women were equol producers. The mean (SD) urinary equol excretion was 0.67 (1.57) mg/day (50th percentile, 0 mg/d; 95th percentile, 4.12 mg/d). Among equol producers, the mean (SD) urinary equol excretion was 1.91 (2.15) mg/day (50th percentile, 1.09 mg/d; 95th percentile, 6.27 mg/d). Among equol producers, compared with those in the lowest quartile of dietary daidzein intake (mean, 4.9 mg/d), those in the highest quartile (mean, 28.5 mg/d) were 76% less likely to have VMS higher than the mean number of VMS (odds ratio, 0.24; 95% CI, 0.07-0.83; trend test across all daidzein levels, P = 0.06). Among equol nonproducers, there were no associations between daidzein intake and VMS frequency. There were no differences in VMS bother or severity among equol producers or nonproducers by dietary daidzein level. Among equol producers, higher equol availability attributable to higher soy consumption contributes to decreased VMS.

Burden of vasomotor symptoms in France, Germany, Italy, Spain, and the United Kingdom.

PubMed

Dibonaventura, Marco Dacosta; Chandran, Arthi; Hsu, Ming-Ann; Bushmakin, Andrew

2013-01-01

Several studies have documented a significant association between vasomotor symptoms (VMS) and a decrement in health outcomes among postmenopausal women, but these studies have mostly focused on the US. The aim of the current study was to broaden this investigation by examining the burden of VMS symptoms in the European Union with respect to both humanistic and economic outcomes. All women aged 40-75 years who completed the 2010 5EU (France, Germany, Italy, Spain, and the UK) National Health and Wellness Survey were identified as potential respondents and invited to participate in an additional cross-sectional, Internet-based survey. Only postmenopausal women from 5EU were included in the current analyses (n = 3801). VMS was assessed using the Menopausal Rating Scale, and was used in multiple regression models as the primary predictor of health status (EQ-5D-3L), work productivity loss, and the number of physician visits due to menopause. Over half (50.3%) of postmenopausal women experienced either mild (24.6%), moderate (17.6%), or severe (8.1%) VMS. Controlling for confounding variables, mild (b = -0.03, P < 0.05), moderate (b = -0.07, P < 0.05), and severe VMS (b = -0.17, P < 0.05) were each associated with worse health utilities relative to women without VMS. Similarly, increased resource use (b = 1.04-2.39, all P < 0.05), overall work impairment (b = 8.71-19.69, all P < 0.05), and activity impairment (b = 11.22-24.54, all P < 0.05) were also observed as VMS severity increased (with each b representing the difference between each level of severity and the reference category). These results suggest a high prevalence of VMS in Western Europe. These symptoms are also associated with both humanistic and economic outcomes. Improved management of VMS may be able to increase the health status and ability to work productively as well as reduce societal direct costs.

Accident ahead? Difficulties of drivers with and without reading impairment recognising words and pictograms in variable message signs.

PubMed

Roca, J; Tejero, P; Insa, B

2018-02-01

A timely and accurate acquisition of the information provided by variable message signs (VMS) can be crucial while driving. In the current study, we assess the difficulties of adults with dyslexia acquiring the information shown in VMS and provide evidence to discuss the controversial use of pictograms as potential countermeasures. Twenty-two adults with dyslexia and 22 matched controls completed a simulated driving session. The legibility of 12 VMS was assessed, including six text messages (e.g. "ACCIDENT") and six single pictograms (e.g. the icon for "accident ahead"). On average, participants with dyslexia started reading text messages when they were closer to the VMS. In addition, while approaching text VMS, they dedicated more gazes and manifested worse control of speed. Regarding pictogram VMS, we observed no differences in response distance, accuracy, response duration, or number of gazes. To sum up, the evidence provided reveals that adults with dyslexia, despite potential compensation effects, may still find difficulties reading text messages in VMS (shorter legibility distances, longer reading times, and increased cognitive effort), whereas we found no such differences in the recognition of pictograms (only some difficulties keeping a steady speed). Research on inclusive measures to improve reading in low-skilled or dyslexic drivers must be encouraged. Copyright © 2017 Elsevier Ltd. All rights reserved.

Stellate ganglion blockade and verbal memory in midlife women: Evidence from a randomized trial.

PubMed

Maki, Pauline M; Rubin, Leah H; Savarese, Antonia; Drogos, Lauren; Shulman, Lee P; Banuvar, Suzanne; Walega, David R

2016-10-01

In a pilot randomized clinical trial of active stellate ganglion blockade (SGB) versus sham control, SGB significantly reduced the frequency of reported moderate to severe vasomotor symptoms (VMS) and the frequency of physiologic VMS measured using ambulatory skin conductance monitors. Here we examine secondary effects of SGB on verbal learning and memory. In a randomized, sham-controlled study, 36 women met eligibility criteria for cognitive assessments, of whom 17 were randomized to receive fluoroscopy-guided SGB and 19 to sham control. At baseline and three months post-treatment, women completed tests of verbal learning and memory (primary outcome) and other cognitive measures and also wore an ambulatory monitor for 24h to measure physiologic VMS and VMS reported in real time. Verbal learning improved following active SGB (p<0.05) but not sham treatment; however, the interaction between group and time was not significant (p values 0.13-0.20). Two secondary cognitive measures improved only in the sham group. Improvements in physiologic VMS correlated significantly with improvements in verbal learning (r=0.51, p<0.05). SGB might confer benefits to memory in relation to the magnitude of improvement in physiologic VMS. Broadly these findings suggest a possible link between physiologic VMS and memory problems in midlife women. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

From forager tracks to prey distributions: an application to tuna vessel monitoring systems (VMS).

PubMed

Walker, Emily; Rivoirard, Jacques; Gaspar, Philippe; Bez, Nicolas

2015-04-01

In the open ocean, movements of migratory fish populations are typically surveyed using tagging methods that are subject to low sample sizes for archive tags, except for a few notable examples, and poor temporal resolution for conventional tags. Alternatively, one can infer patterns of movement of migratory fish by tracking movements of their predators, i.e., fishing vessels, whose navigational systems (e.g., GPS) provide accurate and frequent VMS (vessel monitoring system) records of movement in pursuit of prey. In this paper, we develop a state-space model that infers the foraging activities of fishing vessels from their tracks. Second, we link foraging activities to probabilities of tuna presence. Finally, using multivariate geostatistical interpolation (cokriging) we map the probability of tuna presence together with their estimation variances and produce a time series of indices of abundance. While the segmentation of the trajectories is validated by observers' data, the present VMS-index is compared to catch rate and proved to be useful for management perspectives. The approach reported in this manuscript extends beyond the case study considered. It can be applied to any foragers that engage in an attempt of capture when they see prey and for whom this attempt is linked to a tractable change in behavior.

Planning and management of cloud computing networks

NASA Astrophysics Data System (ADS)

Larumbe, Federico

The evolution of the Internet has a great impact on a big part of the population. People use it to communicate, query information, receive news, work, and as entertainment. Its extraordinary usefulness as a communication media made the number of applications and technological resources explode. However, that network expansion comes at the cost of an important power consumption. If the power consumption of telecommunication networks and data centers is considered as the power consumption of a country, it would rank at the 5 th place in the world. Furthermore, the number of servers in the world is expected to grow by a factor of 10 between 2013 and 2020. This context motivates us to study techniques and methods to allocate cloud computing resources in an optimal way with respect to cost, quality of service (QoS), power consumption, and environmental impact. The results we obtained from our test cases show that besides minimizing capital expenditures (CAPEX) and operational expenditures (OPEX), the response time can be reduced up to 6 times, power consumption by 30%, and CO2 emissions by a factor of 60. Cloud computing provides dynamic access to IT resources as a service. In this paradigm, programs are executed in servers connected to the Internet that users access from their computers and mobile devices. The first advantage of this architecture is to reduce the time of application deployment and interoperability, because a new user only needs a web browser and does not need to install software on local computers with specific operating systems. Second, applications and information are available from everywhere and with any device with an Internet access. Also, servers and IT resources can be dynamically allocated depending on the number of users and workload, a feature called elasticity. This thesis studies the resource management of cloud computing networks and is divided in three main stages. We start by analyzing the planning of cloud computing networks to get a comprehensive vision. The first question to be solved is what are the optimal data center locations. We found that the location of each data center has a big impact on cost, QoS, power consumption, and greenhouse gas emissions. An optimization problem with a multi-criteria objective function is proposed to decide jointly the optimal location of data centers and software components, link capacities, and information routing. Once the network planning has been analyzed, the problem of dynamic resource provisioning in real time is addressed. In this context, virtualization is a key technique in cloud computing because each server can be shared by multiple Virtual Machines (VMs) and the total power consumption can be reduced. In the same line of location problems, we propose a Green Cloud Broker that optimizes VM placement across multiple data centers. In fact, when multiple data centers are considered, response time can be reduced by placing VMs close to users, cost can be minimized, power consumption can be optimized by using energy efficient data centers, and CO2 emissions can be decreased by choosing data centers provided with renewable energy sources. The third stage of the analysis is the short-term management of a cloud data center. In particular, a method is proposed to assign VMs to servers by considering communication traffic among VMs. Cloud data centers receive new applications over time and these applications need on-demand resource provisioning. Each application is composed of multiple types of VMs that interact among themselves. A program called scheduler must place each new VM in a server and that impacts the QoS and power consumption. Our method places VMs that communicate among themselves in servers that are close to each other in the network topology, thus reducing communication delay and increasing the throughput available among VMs. Furthermore, the power consumption of each type of server is considered and the most efficient ones are chosen to place the VMs. The number of VMs of each application can be dynamically changed to match the workload and servers not needed in a particular period can be suspended to save energy. The methodology developed is based on Mixed Integer Programming (MIP) models to formalize the problems and use state of the art optimization solvers. Then, heuristics are developed to solve cases with more than 1,000 potential data center locations for the planning problem, 1,000 nodes for the cloud broker, and 128,000 servers for the VM placement problem. Solutions with very short optimality gaps, between 0% and 1.95%, are obtained, and execution time in the order of minutes for the planning problem and less than a second for real time cases. We consider that this thesis on resource provisioning of cloud computing networks includes important contributions on this research area, and innovative commercial applications based on the proposed methods have promising future.

Intralesional copper wire retention and pingyangmycin injection: an effective combinational therapy for complex venous malformation in soft tissue.

PubMed

Yuan, S-M; Hong, Z-J; Jiang, H-Q; Wang, J; Hu, X-B

2014-04-01

Complex venous malformations (VMs) may extensively involve the soft tissue. The treatment remains a challenge till now. Here we introduce a combinational therapy of copper wires and pingyangmycin (bleomycin A5,PYM). Copper wires were retained in VMs by repeated penetration with a straight needle. Subsequently, PYM solution was injected into the lesion. Eight to 10 days later, copper wires were removed. The dressing was changed every day until the puncture pores healed. Magnetic resonance imaging scanning was performed to observe the change of VMs. From January 2001 to December 2011, 56 patients were treated. During the follow-up period, most of the VMs shrunk obviously. The symptoms were relieved or disappeared. The complications included local pain, temporary paraesthesia and moderate fever, which disappeared quickly after the removal of copper wires. This combinational therapy is a safe and effective approach for the complex VMs in soft tissue.

Vasomotor symptoms and cardiometabolic risk factors in menopausal women: a MONET Group study.

PubMed

Abdulnour, J; Stacey, D; Dionne, I J; Brochu, M; Doucet, É; Prud'homme, D

2016-08-01

Conflicting results have been reported concerning the prevalence of cardiometabolic risk factors in women experiencing vasomotor symptoms (VMS). To compare cardiometabolic risk factors between women with and without VMS during the menopause transition and to determine the influence of physical activity on the prevalence of VMS. Yearly assessment of women transitioning through menopause included self-reported VMS (hot flushes and night sweats), body composition and fat distribution, fasting glucose, insulin and lipids, and physical activity levels. Eighty-five of the 102 premenopausal women at baseline were included (age: 49.9 ± 2.0 years; body mass index: 23.2 ± 2.2 kg/m(2)). According to linear mixed model analyses, no statistically significant differences were observed for fat mass, lean body mass, body fat distribution indices and cardiometabolic risk factors, when comparing symptomatic vs. asymptomatic women. Neither physical activity levels nor intensity were associated with the prevalence of VMS. Our results suggest that women transitioning through menopause who reported VMS did not show greater deteriorations in body composition, body fat distribution and cardiometabolic risk factors. Furthermore, physical activity levels were not associated with lower prevalence of vasomotor symptoms in the present cohort.

Characterization of Location Discrepancies between Envisat/ERS Ship Detection Reports and AIS Records During MARISS Phase 2 Trials in France

NASA Astrophysics Data System (ADS)

Le Bras, Jean-Yves; Germain, Olivier; Hajduch, Guillaume

2008-01-01

During the first phase of the MARISS [1] project CLShas set-up a near real time vessel monitoring chainbased on its operational system for surveillance ofillegal fishing in the Indian Ocean and integrating the©SARTool software, developed by BOOSTT echnologies.Trials performed in the English Channel in 2006 were presented in ENVISA T Symposium 2007 showing several coupling examples between ENVISAT IS6 data and VMS systems, a comparison by the user to VTMS data, and also raising several perspectives of improvement [2]. This paper focuses on the second phase of the project.As for the first phase, ENVISAT SAR scenes (narrow swath, IS6 submode, HH polarization) were acquired, processed at Level 1b (ASA_IMP products) and provided by Kongsberg Satellite Services (KSAT), and completed by ERS PRI images acquired by ESA stations through Cat-1 mechanism, ENVISAT WS ship detection reports through ESA GSE MARCOAST, and metocean data acquired by CLS.Automatic Identification System (AIS) data were used in addition to VMS and VTMS for ground truth identification of vessels.This paper presents the main results of these trials:• An assessment of new chain capabilities implemented after the first phase, such as the azimuth ambiguity removal function in the new version of SARTool©• The use of GIS to reduce false alarms and assess image geolocation.• The potential interest of combining ERS and ENVISAT data• A characterization of differences between locations reported by satellite radar and automatic identification systems.

Ada Compiler Validation Summary Report: Certificate Number: 911028I1. 11229 Telesoft, Telegen2, Ada Development System, for VAX to 1750, Version 3.25, MicroVAX 3800 under VAX/VMS Version V5.4 (Host) to MIL-STD-1750A ECSPO ITS RAID Simulator, Version 6.0 (Target)

DTIC Science & Technology

1991-10-28

included as appropriate. 2-1 IMPLEMENTATION DEPENDENCIES The following 185 tests have floating-point type declarations requiring more digits than...SYSTEM.MAX DIGITS : C24113F..Y (20 tests) C? 705F..Y (20 tests) C35706F..Y (20 tests) C35707F..Y (20 tests) C35708F..Y (20 tests) C35802F..Z (21 tests...trademark of Teleoft. TeleGen2m is a trademark of TeleSofL VAX and VMS! are registered trademarks of Digital Equipment Corp. RESTRICTED RIGHTS LEGEND Use

Landing and Rollout STS-135 Crew Training on the Vertical Motion Simulator (VMS) at NASA Ames (Reporter Pkg)

NASA Image and Video Library

2011-07-05

Every Space Shuttle flight crew has trained for the final phase of a Shuttle mission, landing and rollout, using the VMS at NASA Ames. This story follows at the crew of STS-135, the final Space Shuttle mission, as they train on the VMS. Includes an interview with Chris Ferguson, the STS-135 mission commander.

Guidelines for the effective operation and control of VDOT permanent variable message sign and highway advisory radio units : state of the practice and recommendations : technical assistance report.

DOT National Transportation Integrated Search

1996-01-01

On January 31, 1996, VDOT's Statewide Incident Management (SIM) Committee requested that guidelines for the control of permanent variable message sign (VMS) and permanent highway advisory radio (HAR) units be developed. The guidelines do not address ...

50 CFR 665.252 - Harvest limitation program.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Grounds for Permit Area 1 will be set annually for the calendar year and shall: (1) Apply to the total... the overall harvest guideline for Crustacean Permit Area 1 will be reached; (ii) Closure date after... Permit Area 1 is prohibited by any permitted vessel that is not operating a VMS unit certified by NMFS...

50 CFR 665.252 - Harvest limitation program.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Grounds for Permit Area 1 will be set annually for the calendar year and shall: (1) Apply to the total... the overall harvest guideline for Crustacean Permit Area 1 will be reached; (ii) Closure date after... Permit Area 1 is prohibited by any permitted vessel that is not operating a VMS unit certified by NMFS...

50 CFR 665.252 - Harvest limitation program.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Grounds for Permit Area 1 will be set annually for the calendar year and shall: (1) Apply to the total... the overall harvest guideline for Crustacean Permit Area 1 will be reached; (ii) Closure date after... Permit Area 1 is prohibited by any permitted vessel that is not operating a VMS unit certified by NMFS...

WinTRAX: A raytracing software package for the design of multipole focusing systems

NASA Astrophysics Data System (ADS)

Grime, G. W.

2013-07-01

The software package TRAX was a simulation tool for modelling the path of charged particles through linear cylindrical multipole fields described by analytical expressions and was a development of the earlier OXRAY program (Grime and Watt, 1983; Grime et al., 1982) [1,2]. In a 2005 comparison of raytracing software packages (Incerti et al., 2005) [3], TRAX/OXRAY was compared with Geant4 and Zgoubi and was found to give close agreement with the more modern codes. TRAX was a text-based program which was only available for operation in a now rare VMS workstation environment, so a new program, WinTRAX, has been developed for the Windows operating system. This implements the same basic computing strategy as TRAX, and key sections of the code are direct translations from FORTRAN to C++, but the Windows environment is exploited to make an intuitive graphical user interface which simplifies and enhances many operations including system definition and storage, optimisation, beam simulation (including with misaligned elements) and aberration coefficient determination. This paper describes the program and presents comparisons with other software and real installations.

Charliecloud

DOE Office of Scientific and Technical Information (OSTI.GOV)

Priedhorsky, Reid; Randles, Tim

Charliecloud is a set of scripts to let users run a virtual cluster of virtual machines (VMs) on a desktop or supercomputer. Key functions include: 1. Creating (typically by installing an operating system from vendor media) and updating VM images; 2. Running a single VM; 3. Running multiple VMs in a virtual cluster. The virtual machines can talk to one another over the network and (in some cases) the outside world. This is accomplished by calling external programs such as QEMU and the Virtual Distributed Ethernet (VDE) suite. The goal is to let users have a virtual cluster containing nodesmore » where they have privileged access, while isolating that privilege within the virtual cluster so it cannot affect the physical compute resources. Host configuration enforces security; this is not included in Charliecloud, though security guidelines are included in its documentation and Charliecloud is designed to facilitate such configuration. Charliecloud manages passing information from host computers into and out of the virtual machines, such as parameters of the virtual cluster, input data specified by the user, output data from virtual compute jobs, VM console display, and network connections (e.g., SSH or X11). Parameters for the virtual cluster (number of VMs, RAM and disk per VM, etc.) are specified by the user or gathered from the environment (e.g., SLURM environment variables). Example job scripts are included. These include computation examples (such as a "hello world" MPI job) as well as performance tests. They also include a security test script to verify that the virtual cluster is appropriately sandboxed. Tests include: 1. Pinging hosts inside and outside the virtual cluster to explore connectivity; 2. Port scans (again inside and outside) to see what services are available; 3. Sniffing tests to see what traffic is visible to running VMs; 4. IP address spoofing to test network functionality in this case; 5. File access tests to make sure host access permissions are enforced. This test script is not a comprehensive scanner and does not test for specific vulnerabilities. Importantly, no information about physical hosts or network topology is included in this script (or any of Charliecloud); while part of a sensible test, such information is specified by the user when the test is run. That is, one cannot learn anything about the LANL network or computing infrastructure by examining Charliecloud code.« less

Heterogeneous distributed databases: A case study

NASA Technical Reports Server (NTRS)

Stewart, Tracy R.; Mukkamala, Ravi

1991-01-01

Alternatives are reviewed for accessing distributed heterogeneous databases and a recommended solution is proposed. The current study is limited to the Automated Information Systems Center at the Naval Sea Combat Systems Engineering Station at Norfolk, VA. This center maintains two databases located on Digital Equipment Corporation's VAX computers running under the VMS operating system. The first data base, ICMS, resides on a VAX11/780 and has been implemented using VAX DBMS, a CODASYL based system. The second database, CSA, resides on a VAX 6460 and has been implemented using the ORACLE relational database management system (RDBMS). Both databases are used for configuration management within the U.S. Navy. Different customer bases are supported by each database. ICMS tracks U.S. Navy ships and major systems (anti-sub, sonar, etc.). Even though the major systems on ships and submarines have totally different functions, some of the equipment within the major systems are common to both ships and submarines.

ART/Ada design project, phase 1. Task 3 report: Test plan

NASA Technical Reports Server (NTRS)

Allen, Bradley P.

1988-01-01

The plan is described for the integrated testing and benchmark of Phase Ada based ESBT Design Research Project. The integration testing is divided into two phases: (1) the modules that do not rely on the Ada code generated by the Ada Generator are tested before the Ada Generator is implemented; and (2) all modules are integrated and tested with the Ada code generated by the Ada Generator. Its performance and size as well as its functionality is verified in this phase. The target platform is a DEC Ada compiler on VAX mini-computers and VAX stations running the VMS operating system.

Efficacy and safety of Duplex-guided polidocanol foam sclerotherapy for venous malformations.

PubMed

Ali, Haitham; Saleh, Mahmoud; Mohammed, Walid

2017-06-01

The aim of our study was to report our experience regarding the safety, efficacy of duplex-guided polidocanol (POL) foam sclerotherapy on the overall status of signs and symptoms in patients with venous malformations (VMs). Thirty seven patients with symptomatic extratruncular VMs were treated with duplex-guided POL foam sclerotherapy using Tessari's method. Twenty five patients had limited VMs, while twelve had infiltrating VMs. Postsclerotherapy surveillance was done 6 months after the last sclerotherapy session and comprised both clinical and duplex evaluation. Clinical evaluation entailed a patient self-assessment questionnaire using a four-point scale to rate the degree of symptoms improvement as follows: disappeared, decreased, worsened, or recurred. Findings obtained by duplex scanning were divided into four groups: 1) disappeared group; 2) partially recanalized group; 3) totally recanalized group; and 4) worsened group. There were 20 males and 17 females with mean age of 22.8±5.5 years. There was a significant reduction in the total amount of POL (P=0.0037), the number of sclerotherapy sessions was significantly lesser (P=0.0019), and treatment success was significantly higher (P=0.0495) in patients with limited VMs in comparison to those with infiltrating VMs. No major complications related to sclerotherapy were encountered in both groups. Polidocanol foam sclerotherapy is effective, and safe for treatment of VMs, with high success rate and low risk of major complications. Although associated with relatively high recurrence rate compared with ethanol sclerotherapy, this can be overcome by additional treatment sessions, given the relative simplicity, speed, and safety.

Traffic-Sensitive Live Migration of Virtual Machines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deshpande, Umesh; Keahey, Kate

2015-01-01

In this paper we address the problem of network contention between the migration traffic and the VM application traffic for the live migration of co-located Virtual Machines (VMs). When VMs are migrated with pre-copy, they run at the source host during the migration. Therefore the VM applications with predominantly outbound traffic contend with the outgoing migration traffic at the source host. Similarly, during post-copy migration, the VMs run at the destination host. Therefore the VM applications with predominantly inbound traffic contend with the incoming migration traffic at the destination host. Such a contention increases the total migration time of themore » VMs and degrades the performance of VM application. Here, we propose traffic-sensitive live VM migration technique to reduce the contention of migration traffic with the VM application traffic. It uses a combination of pre-copy and post-copy techniques for the migration of the co-located VMs, instead of relying upon any single pre-determined technique for the migration of all the VMs. We base the selection of migration techniques on VMs' network traffic profiles so that the direction of migration traffic complements the direction of the most VM application traffic. We have implemented a prototype of traffic-sensitive migration on the KVM/QEMU platform. In the evaluation, we compare traffic-sensitive migration against the approaches that use only pre-copy or only post-copy for VM migration. We show that our approach minimizes the network contention for migration, thus reducing the total migration time and the application degradation.« less

78 FR 55060 - Proposed Information Collection; Comment Request; Expanded Vessel Monitoring System Requirement...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-09

... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration Proposed Information Collection; Comment Request; Expanded Vessel Monitoring System Requirement in the Pacific Coast Groundfish... and use a vessel monitoring system (VMS) that automatically sends hourly position reports. Exemptions...

76 FR 38598 - Atlantic Highly Migratory Species; Vessel Monitoring Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-01

... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration 50 CFR Part 635 RIN 0648-BA64 Atlantic Highly Migratory Species; Vessel Monitoring Systems AGENCY: National Marine Fisheries... on June 21, 2011, concerning modifications to vessel monitoring system (VMS) requirements in Atlantic...

Evaluation of automated decisionmaking methodologies and development of an integrated robotic system simulation. Appendix A: ROBSIM user's guide

NASA Technical Reports Server (NTRS)

Haley, D. C.; Almand, B. J.; Thomas, M. M.; Krauze, L. D.; Gremban, K. D.; Sanborn, J. C.; Kelley, J. H.; Depkovich, T. M.; Wolfe, W. J.; Nguyen, T.

1986-01-01

The purpose of the Robotics Simulation Program is to provide a broad range of computer capabilities to assist in the design, verification, simulation, and study of robotics systems. ROBSIM is program in FORTRAN 77 for use on a VAX 11/750 computer under the VMS operating system. This user's guide describes the capabilities of the ROBSIM programs, including the system definition function, the analysis tools function and the postprocessor function. The options a user may encounter with each of these executables are explained in detail and the different program prompts appearing to the user are included. Some useful suggestions concerning the appropriate answers to be given by the user are provided. An example user interactive run in enclosed for each of the main program services, and some of the capabilities are illustrated.

SURE - SEMI-MARKOV UNRELIABILITY RANGE EVALUATOR (SUN VERSION)

NASA Technical Reports Server (NTRS)

Butler, R. W.

1994-01-01

The Semi-Markov Unreliability Range Evaluator, SURE, is an analysis tool for reconfigurable, fault-tolerant systems. Traditional reliability analyses are based on aggregates of fault-handling and fault-occurrence models. SURE provides an efficient means for calculating accurate upper and lower bounds for the death state probabilities for a large class of semi-Markov models, not just those which can be reduced to critical-pair architectures. The calculated bounds are close enough (usually within 5 percent of each other) for use in reliability studies of ultra-reliable computer systems. The SURE bounding theorems have algebraic solutions and are consequently computationally efficient even for large and complex systems. SURE can optionally regard a specified parameter as a variable over a range of values, enabling an automatic sensitivity analysis. Highly reliable systems employ redundancy and reconfiguration as methods of ensuring operation. When such systems are modeled stochastically, some state transitions are orders of magnitude faster than others; that is, fault recovery is usually faster than fault arrival. SURE takes these time differences into account. Slow transitions are described by exponential functions and fast transitions are modeled by either the White or Lee theorems based on means, variances, and percentiles. The user must assign identifiers to every state in the system and define all transitions in the semi-Markov model. SURE input statements are composed of variables and constants related by FORTRAN-like operators such as =, +, *, SIN, EXP, etc. There are a dozen major commands such as READ, READO, SAVE, SHOW, PRUNE, TRUNCate, CALCulator, and RUN. Once the state transitions have been defined, SURE calculates the upper and lower probability bounds for entering specified death states within a specified mission time. SURE output is tabular. The mathematical approach chosen to solve a reliability problem may vary with the size and nature of the problem. Although different solution techniques are utilized on different programs, it is possible to have a common input language. The Systems Validation Methods group at NASA Langley Research Center has created a set of programs that form the basis for a reliability analysis workstation. The set of programs are: SURE reliability analysis program (COSMIC program LAR-13789, LAR-14921); the ASSIST specification interface program (LAR-14193, LAR-14923), PAWS/STEM reliability analysis programs (LAR-14165, LAR-14920); and the FTC fault tree tool (LAR-14586, LAR-14922). FTC is used to calculate the top-event probability for a fault tree. PAWS/STEM and SURE are programs which interpret the same SURE language, but utilize different solution methods. ASSIST is a preprocessor that generates SURE language from a more abstract definition. SURE, ASSIST, and PAWS/STEM are also offered as a bundle. Please see the abstract for COS-10039/COS-10041, SARA - SURE/ASSIST Reliability Analysis Workstation, for pricing details. SURE was originally developed for DEC VAX series computers running VMS and was later ported for use on Sun computers running SunOS. The VMS version (LAR13789) is written in PASCAL, C-language, and FORTRAN 77. The standard distribution medium for the VMS version of SURE is a 9-track 1600 BPI magnetic tape in VMSINSTAL format. It is also available on a TK50 tape cartridge in VMSINSTAL format. Executables are included. The Sun UNIX version (LAR14921) is written in ANSI C-language and PASCAL. An ANSI compliant C compiler is required in order to compile the C portion of this package. The standard distribution medium for the Sun version of SURE is a .25 inch streaming magnetic tape cartridge in UNIX tar format. Both Sun3 and Sun4 executables are included. SURE was developed in 1988 and last updated in 1992. DEC, VAX, VMS, and TK50 are trademarks of Digital Equipment Corporation. TEMPLATE is a registered trademark of Template Graphics Software, Inc. UNIX is a registered trademark of AT&T Bell Laboratories. Sun3 and Sun4 are trademarks of Sun Microsystems, Inc.

PAWS/STEM - PADE APPROXIMATION WITH SCALING AND SCALED TAYLOR EXPONENTIAL MATRIX (VAX VMS VERSION)

NASA Technical Reports Server (NTRS)

Butler, R. W.

1994-01-01

Traditional fault-tree techniques for analyzing the reliability of large, complex systems fail to model the dynamic reconfiguration capabilities of modern computer systems. Markov models, on the other hand, can describe fault-recovery (via system reconfiguration) as well as fault-occurrence. The Pade Approximation with Scaling (PAWS) and Scaled Taylor Exponential Matrix (STEM) programs provide a flexible, user-friendly, language-based interface for the creation and evaluation of Markov models describing the behavior of fault-tolerant reconfigurable computer systems. PAWS and STEM produce exact solutions for the probability of system failure and provide a conservative estimate of the number of significant digits in the solution. The calculation of the probability of entering a death state of a Markov model (representing system failure) requires the solution of a set of coupled differential equations. Because of the large disparity between the rates of fault arrivals and system recoveries, Markov models of fault-tolerant architectures inevitably lead to numerically stiff differential equations. Both PAWS and STEM have the capability to solve numerically stiff models. These complementary programs use separate methods to determine the matrix exponential in the solution of the model's system of differential equations. In general, PAWS is better suited to evaluate small and dense models. STEM operates at lower precision, but works faster than PAWS for larger models. The mathematical approach chosen to solve a reliability problem may vary with the size and nature of the problem. Although different solution techniques are utilized on different programs, it is possible to have a common input language. The Systems Validation Methods group at NASA Langley Research Center has created a set of programs that form the basis for a reliability analysis workstation. The set of programs are: SURE reliability analysis program (COSMIC program LAR-13789, LAR-14921); the ASSIST specification interface program (LAR-14193, LAR-14923), PAWS/STEM reliability analysis programs (LAR-14165, LAR-14920); and the FTC fault tree tool (LAR-14586, LAR-14922). FTC is used to calculate the top-event probability for a fault tree. PAWS/STEM and SURE are programs which interpret the same SURE language, but utilize different solution methods. ASSIST is a preprocessor that generates SURE language from a more abstract definition. SURE, ASSIST, and PAWS/STEM are also offered as a bundle. Please see the abstract for COS-10039/COS-10041, SARA - SURE/ASSIST Reliability Analysis Workstation, for pricing details. PAWS/STEM was originally developed for DEC VAX series computers running VMS and was later ported for use on Sun computers running SunOS. The package is written in PASCAL, ANSI compliant C-language, and FORTRAN 77. The standard distribution medium for the VMS version of PAWS/STEM (LAR-14165) is a 9-track 1600 BPI magnetic tape in VMSINSTAL format. It is also available on a TK50 tape cartridge in VMSINSTAL format. Executables are included. The standard distribution medium for the Sun version of PAWS/STEM (LAR-14920) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. Both Sun3 and Sun4 executables are included. PAWS/STEM was developed in 1989 and last updated in 1991. DEC, VAX, VMS, and TK50 are trademarks of Digital Equipment Corporation. SunOS, Sun3, and Sun4 are trademarks of Sun Microsystems, Inc. UNIX is a registered trademark of AT&T Bell Laboratories.

Very Massive Stars and the Eddington Limit

NASA Astrophysics Data System (ADS)

Crowther, P. A.; Hirschi, R.; Walborn, N. R.; Yusof, N.

2012-12-01

We use contemporary evolutionary models for very massive stars (VMS) to assess whether the Eddington limit constrains the upper stellar mass limit. We also consider the interplay between mass and age for the wind properties and spectral morphology of VMS, with reference to the recently modified classification scheme for O2-3.5 If*/WN stars. Finally, the death of VMS in the local universe is considered in the context of pair instability supernovae.

Electric vehicle equipment for grid-integrated vehicles

DOEpatents

Kempton, Willett

2013-08-13

Methods, systems, and apparatus for interfacing an electric vehicle with an electric power grid are disclosed. An exemplary apparatus may include a station communication port for interfacing with electric vehicle station equipment (EVSE), a vehicle communication port for interfacing with a vehicle management system (VMS), and a processor coupled to the station communication port and the vehicle communication port to establish communication with the EVSE via the station communication port, receive EVSE attributes from the EVSE, and issue commands to the VMS to manage power flow between the electric vehicle and the EVSE based on the EVSE attributes. An electric vehicle may interface with the grid by establishing communication with the EVSE, receiving the EVSE attributes, and managing power flow between the EVE and the grid based on the EVSE attributes.

77 FR 36488 - Proposed Information Collection; Comment Request; Vessel Monitoring System Requirements Under the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-19

... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration Proposed Information Collection; Comment Request; Vessel Monitoring System Requirements Under the Western and Central Pacific...-fixing transmitters (``Vessel Monitoring System-VMS-units'') at all times except when the vessel is in...

75 FR 62098 - Proposed Information Collection; Comment Request; Expanded Vessel Monitoring System Requirement...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-07

... Collection; Comment Request; Expanded Vessel Monitoring System Requirement in the Pacific Coast Groundfish... and use a vessel monitoring system (VMS) that automatically sends hourly position reports. Exemptions... declaration reporting system are not expected to change the public reporting burden. II. Method of Collection...

Organic Carbon/Water and Dissolved Organic Carbon/Water Partitioning of Cyclic Volatile Methylsiloxanes: Measurements and Polyparameter Linear Free Energy Relationships.

PubMed

Panagopoulos, Dimitri; Jahnke, Annika; Kierkegaard, Amelie; MacLeod, Matthew

2015-10-20

The sorption of cyclic volatile methyl siloxanes (cVMS) to organic matter has a strong influence on their fate in the aquatic environment. We report new measurements of the partition ratios between freshwater sediment organic carbon and water (KOC) and between Aldrich humic acid dissolved organic carbon and water (KDOC) for three cVMS, and for three polychlorinated biphenyls (PCBs) that were used as reference chemicals. Our measurements were made using a purge-and-trap method that employs benchmark chemicals to calibrate mass transfer at the air/water interface in a fugacity-based multimedia model. The measured log KOC of octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5), and dodecamethylcyclohexasiloxane (D6) were 5.06, 6.12, and 7.07, and log KDOC were 5.05, 6.13, and 6.79. To our knowledge, our measurements for KOC of D6 and KDOC of D4 and D6 are the first reported. Polyparameter linear free energy relationships (PP-LFERs) derived from training sets of empirical data that did not include cVMS generally did not predict our measured partition ratios of cVMS accurately (root-mean-squared-error (RMSE) for logKOC 0.76 and for logKDOC 0.73). We constructed new PP-LFERs that accurately describe partition ratios for the cVMS as well as for other chemicals by including our new measurements in the existing training sets (logKOC RMSEcVMS: 0.09, logKDOC RMSEcVMS: 0.12). The PP-LFERs we have developed here should be further evaluated and perhaps recalibrated when experimental data for other siloxanes become available.

Understanding of Cyclic Volatile Methyl Siloxane Fate in a High Latitude Lake Is Constrained by Uncertainty in Organic Carbon-Water Partitioning.

PubMed

Krogseth, Ingjerd Sunde; Whelan, Michael John; Christensen, Guttorm Normann; Breivik, Knut; Evenset, Anita; Warner, Nicholas Alexander

2017-01-03

Cyclic volatile methyl siloxanes (cVMS) are emitted to aquatic environments with wastewater effluents. Here, we evaluate the environmental behavior of three cVMS compounds (octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5) and dodecamethylcyclohexasiloxane (D6)) in a high latitude lake (Storvannet, 70°N 23°E), experiencing intermittent wastewater emissions and high latitude environmental conditions (low temperatures and seasonal ice cover). Measured cVMS concentrations in lake water were below detection limits in both March and June 2014. However, mean concentrations in sediments were 207 ± 30, 3775 ± 973 and 848 ± 211 ng g -1 organic carbon for D4, D5 and D6, respectively. To rationalize measurements, a fugacity-based model for lakes (QWASI) was parametrized for Storvannet. The key removal process for cVMS from the lake was predicted to be advection due to the low hydraulic retention time of the lake, followed by volatilization. Predicted cVMS behavior was highly sensitive to the partition coefficient between organic carbon and water (K OC ) and its temperature dependence. Predictions indicated lower overall persistence with decreasing temperature due to enhanced partitioning from sediments to water. Inverse modeling to predict steady-state emissions from cVMS concentrations in sediment provided unrealistically high emissions, when evaluated against measured concentrations in sewage. However, high concentrations of cVMS in sediment and low concentrations in water could be explained via a hypothetical dynamic emission scenario consistent with combined sewer overflows. The study illustrates the importance of considering compound-specific behavior of emerging contaminants that may differ from legacy organic contaminants.

Distribution of Bottom Trawling Effort in the Yellow Sea and East China Sea

PubMed Central

Zhang, Shengmao; Jin, Shaofei; Zhang, Heng; Fan, Wei; Tang, Fenghua; Yang, Shenglong

2016-01-01

Bottom trawling is one of the most efficient fishing activities, but serious and persistent ecological issues have been observed by fishers, scientists and fishery managers. Although China has applied the Beidou fishing vessel position monitoring system (VMS) to manage trawlers since 2006, little is known regarding the impacts of trawling on the sea bottom environments. In this study, continuous VMS data of the 1403 single-rig otter trawlers registered in the Xiangshan Port, 3.9% of the total trawlers in China, were used to map the trawling effort in 2013. We used the accumulated distance (AD), accumulated power distance (APD), and trawling intensity as indexes to express the trawling efforts in the Yellow Sea (YS) and East China Sea (ECS). Our results show that all three indexes had similar patterns in the YS and ECS, and indicated a higher fishing effort of fishing grounds that were near the port. On average, the seabed was trawled 0.73 times in 2013 over the entire fishing region, and 51.38% of the total fishing grounds were with no fishing activities. Because of VMS data from only a small proportion of Chinese trawlers was calculated fishing intensity, more VMS data is required to illustrate the overall trawling effort in China seas. Our results enable fishery managers to identify the distribution of bottom trawling activities in the YS and ECS, and hence to make effective fishery policy. PMID:27855215

76 FR 59660 - Proposed Information Collection; Comment Request; Permitting, Vessel Identification, and Vessel...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-27

... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration Proposed Information Collection; Comment Request; Permitting, Vessel Identification, and Vessel Monitoring System Requirements for... satellite- based vessel monitoring system (VMS). This collection of information is needed for permit...

Evaluation of the ADAPTIR System for Work Zone Traffic Control

DOT National Transportation Integrated Search

1999-11-01

The ADAPTIR system (Automated Data Acquisition and Processing of Traffic Information in Real Time) uses variable message signs (VMS) equipped with radar units, along with a software program to interpret the data, to display appropriate warning and ad...

Physics-based Stabilization of Spectral Elements for the 3D Euler Equations of Moist Atmospheric Convection

DTIC Science & Technology

2014-06-01

6000 s. 7 Table 1: Case 3. Comparative results of front location at 900s. LES (SEM), VMS (FE), WRF -ARW V2.2 (FD), f-wave (FV), filtered Spectral Elements...NO 14629 VMS [15] (75 m) NO 14487 VMS [15] (100 m) NO 14355 WRF -ARW 50 m YES 14470 SE [6] 50m YES 14767 DG [6] 50m YES 14767 f-wave (FV) [1] 50 m YES

MsFLASH participants' priorities for alleviating menopausal symptoms.

PubMed

Carpenter, J S; Woods, N F; Otte, J L; Guthrie, K A; Hohensee, C; Newton, K M; Joffe, H; Cohen, L; Sternfeld, B; Lau, R J; Reed, S D; LaCroix, A Z

2015-01-01

To describe self-reported menopausal symptom priorities and their association with demographics and other symptoms among participants in an intervention trial for vasomotor symptoms (VMS). Cross-sectional study embedded in the MsFLASH 02 trial, a three-by-two factorial design of yoga vs. exercise vs. usual activity and omega-3-fatty acid vs. placebo. At baseline, women (n = 354) completed hot flush diaries, a card sort task to prioritize symptoms they would most like to alleviate, and standardized questionnaires. The most common symptom priorities were: VMS (n = 322), sleep (n = 191), concentration (n = 140), and fatigue (n = 116). In multivariate models, women who chose VMS as their top priority symptom (n = 210) reported significantly greater VMS severity (p = 0.004) and never smoking (p = 0.012), and women who chose sleep as their top priority symptom (n = 100) were more educated (p ≤ 0.001) and had worse sleep quality (p < 0.001). ROC curves identified sleep scale scores that were highly predictive of ranking sleep as a top priority symptom. Among women entering an intervention trial for VMS and with relatively low prevalence of depression and anxiety, VMS was the priority symptom for treatment. A card sort may be a valid tool for quickly assessing symptom priorities in clinical practice and research.

Elucidating the Behavior of Cyclic Volatile Methylsiloxanes in a Subarctic Freshwater Food Web: A Modeled and Measured Approach.

PubMed

Krogseth, Ingjerd S; Undeman, Emma; Evenset, Anita; Christensen, Guttorm N; Whelan, Mick J; Breivik, Knut; Warner, Nicholas A

2017-11-07

Cyclic volatile methylsiloxanes (cVMS) are used in personal care products and emitted to aquatic environments through wastewater effluents, and their bioaccumulation potential is debated. Here, a new bentho-pelagic version of the ACC-HUMAN model was evaluated for polychlorinated biphenyls (PCBs) and applied to cVMS in combination with measurements to explore their bioaccumulation behavior in a subarctic lake. Predictions agreed better with measured PCB concentrations in Arctic char (Salvelinus alpinus) and brown trout (Salmo trutta) when the benthic link was included than in the pelagic-only model. Measured concentrations of decamethylcyclopentasiloxane (D5) were 60 ± 1.2 (Chironomidae larvae), 107 ± 4.5 (pea clams Pisidium sp.), 131 ± 105 (three-spined sticklebacks: Gasterosteus aculeatus), 41 ± 38 (char), and 9.9 ± 5.9 (trout) ng g -1 wet weight. Concentrations were lower for octamethylcyclotetrasiloxane (D4) and dodecamethylcyclohexasiloxane (D6), and none of the cVMS displayed trophic magnification. Predicted cVMS concentrations were lower than measured in benthos, but agreed well with measurements in fish. cVMS removal through ventilation was an important predicted loss mechanism for the benthic-feeding fish. Predictions were highly sensitive to the partition coefficient between organic carbon and water (K OC ) and its temperature dependence, as this controlled bioavailability for benthos (the main source of cVMS for fish).

Scenario Development Process at the Vertical Motion Simulator

NASA Technical Reports Server (NTRS)

Reardon, Scott E.; Beard, Steven D.; Lewis, Emily

2017-01-01

There has been a significant effort within the simulation community to standardize many aspects of flight simulation. More recently, an effort has begun to develop a formal scenario definition language for aviation. A working group within the AIAA Modeling and Simulation Technical Committee has been created to develop a standard aviation scenario definition language, though much of the initial effort has been tailored to training simulators. Research and development (R&D) simulators, like the Vertical Motion Simulator (VMS), and training simulators have different missions and thus have different scenario requirements. The purpose of this paper is to highlight some of the unique tasks and scenario elements used at the VMS so they may be captured by scenario standardization efforts. The VMS most often performs handling qualities studies and transfer of training studies. Three representative handling qualities simulation studies and two transfer of training simulation studies are described in this paper. Unique scenario elements discussed in this paper included special out-the-window (OTW) targets and environmental conditions, motion system parameters, active inceptor parameters, and configurable vehicle math model parameters.

Murmer, a message generator and reporter for Unix, VMS, and VxWorks

NASA Astrophysics Data System (ADS)

Oleynik, G.; Appleton, B.; Moore, C.; Sergey, G.; Udumula, L.

1994-02-01

Murmer is a Unix based message generation, reporting, display, and logging system that we have developed for use in data acquisition systems at Fermilab. Murmer is a tool for the production and management of message reporting. Its usefulness ranges from software product development and maintenance to system level shakedown and diagnostics. Murmer provides a VMS MESSAGE-like function code generation utility, a client routine package for sending these codes over the network to a central server, and a server which translates the codes into meaningful visual information, writes the information to a logfile, and display it on B&W or color X windows. Because Murmer stores message information in keyed access files, it can provide advanced features such as popping up help when a displayed message is clicked on by the mouse and executing 'action' shell scripts when selected messages are received by the server.

A security-awareness virtual machine management scheme based on Chinese wall policy in cloud computing.

PubMed

Yu, Si; Gui, Xiaolin; Lin, Jiancai; Tian, Feng; Zhao, Jianqiang; Dai, Min

2014-01-01

Cloud computing gets increasing attention for its capacity to leverage developers from infrastructure management tasks. However, recent works reveal that side channel attacks can lead to privacy leakage in the cloud. Enhancing isolation between users is an effective solution to eliminate the attack. In this paper, to eliminate side channel attacks, we investigate the isolation enhancement scheme from the aspect of virtual machine (VM) management. The security-awareness VMs management scheme (SVMS), a VMs isolation enhancement scheme to defend against side channel attacks, is proposed. First, we use the aggressive conflict of interest relation (ACIR) and aggressive in ally with relation (AIAR) to describe user constraint relations. Second, based on the Chinese wall policy, we put forward four isolation rules. Third, the VMs placement and migration algorithms are designed to enforce VMs isolation between the conflict users. Finally, based on the normal distribution, we conduct a series of experiments to evaluate SVMS. The experimental results show that SVMS is efficient in guaranteeing isolation between VMs owned by conflict users, while the resource utilization rate decreases but not by much.

A Security-Awareness Virtual Machine Management Scheme Based on Chinese Wall Policy in Cloud Computing

PubMed Central

Gui, Xiaolin; Lin, Jiancai; Tian, Feng; Zhao, Jianqiang; Dai, Min

2014-01-01

Cloud computing gets increasing attention for its capacity to leverage developers from infrastructure management tasks. However, recent works reveal that side channel attacks can lead to privacy leakage in the cloud. Enhancing isolation between users is an effective solution to eliminate the attack. In this paper, to eliminate side channel attacks, we investigate the isolation enhancement scheme from the aspect of virtual machine (VM) management. The security-awareness VMs management scheme (SVMS), a VMs isolation enhancement scheme to defend against side channel attacks, is proposed. First, we use the aggressive conflict of interest relation (ACIR) and aggressive in ally with relation (AIAR) to describe user constraint relations. Second, based on the Chinese wall policy, we put forward four isolation rules. Third, the VMs placement and migration algorithms are designed to enforce VMs isolation between the conflict users. Finally, based on the normal distribution, we conduct a series of experiments to evaluate SVMS. The experimental results show that SVMS is efficient in guaranteeing isolation between VMs owned by conflict users, while the resource utilization rate decreases but not by much. PMID:24688434

ITS traffic data consolidation system

DOT National Transportation Integrated Search

2005-03-01

The Arizona Department of Transportation (ADOT) maintains a variety of independent applications to monitor roadway : conditions and activities across the state including traffic counts, weather data, signal timing, Variable Message Sign (VMS) : advis...

Venous malformations of the head and neck: a diagnostic approach and a proposed management approach based on clinical, radiological, and histopathology findings.

PubMed

Aboelatta, Yasser Abdallah; Nagy, Eman; Shaker, Mohamed; Massoud, Karim Samir

2014-07-01

There is no easy road map for venous malformations (VMs) of the head and neck according to which treatment modality can be chosen. The purpose of this study was to identify different types of VMs of the head and neck based on clinical, histopathology, MRI, and venography findings that help in specification of different treatment modalities. Sixty-nine patients with VMs of the head and neck were included in this study. Our results proposed a diagnostic approach for VMs of the head and neck. MRI, venography, and clinical examination had important impact in decision-making, whereas histopathology had no impact. A management approach has been suggested for each type and its subtypes. Copyright © 2013 Wiley Periodicals, Inc.

Future directions in flight simulation: A user perspective

NASA Technical Reports Server (NTRS)

Jackson, Bruce

1993-01-01

Langley Research Center was an early leader in simulation technology, including a special emphasis in space vehicle simulations such as the rendezvous and docking simulator for the Gemini program and the lunar landing simulator used before Apollo. In more recent times, Langley operated the first synergistic six degree of freedom motion platform (the Visual Motion Simulator, or VMS) and developed the first dual-dome air combat simulator, the Differential Maneuvering Simulator (DMS). Each Langley simulator was developed more or less independently from one another with different programming support. At present time, the various simulation cockpits, while supported by the same host computer system, run dissimilar software. The majority of recent investments in Langley's simulation facilities have been hardware procurements: host processors, visual systems, and most recently, an improved motion system. Investments in software improvements, however, have not been of the same order.

Design and Implementation of Software Protocol in VAX/VMS Using Ethernet Local Area Network.

DTIC Science & Technology

1983-06-01

firm hclding the trademark: INTEL Ccrporation, Santa Clara, California INTELLEC IDS Multbus DIGITAL Research, Pacific Grove, California CE/M-80...bcard NS2030 VMS device driver and N11010 diagnostic program DIGITAL Equipment Corporation, Maynard, Massachusetts V&Z-11/780 Mini computer VAX/VMS...8217 . . - - . , . editors, libary , etc.) of one node to an application process in another ncde. Such protocols may include: 1) .. 11 T f6 - allowing a process in one node to

ARC-2008-ACD08-0157-005

NASA Image and Video Library

2008-07-28

NASA AA - Associate Administrator for Aeronautics Jai Shin visits Ames Research Center and tours the Vertical Motion Simulator (VMS, T-cab) Jaiwon Shin, Moffett Field Hangar 1 shows in the VMS visual scene.

50 CFR 648.10 - VMS and DAS requirements for vessel owners/operators.

Code of Federal Regulations, 2010 CFR

2010-10-01

... notification. The owner of a vessel issued a limited access monkfish or red crab permit who is participating in... confirmation numbers for the current and immediately prior NE multispecies, monkfish, or red crab fishing trip... specified in § 648.94(c); and any vessel issued a limited access red crab permit subject to the red crab DAS...

Consistency in trophic magnification factors of cyclic methyl siloxanes in pelagic freshwater food webs leading to brown trout.

PubMed

Borgå, Katrine; Fjeld, Eirik; Kierkegaard, Amelie; McLachlan, Michael S

2013-12-17

Cyclic volatile methyl siloxanes (cVMS) concentrations were analyzed in the pelagic food web of two Norwegian lakes (Mjøsa, Randsfjorden), and in brown trout (Salmo trutta) and Arctic char (Salvelinus alpinus) collected in a reference lake (Femunden), in 2012. Lakes receiving discharge from wastewater treatment plants (Mjøsa and Randsfjorden) had cVMS concentrations in trout that were up to 2 orders of magnitude higher than those in Femunden, where most samples were close to the limit of quantification (LOQ). Food web biomagnification of cVMS in Mjøsa and Randsfjorden was quantified by estimation of trophic magnification factors (TMFs). TMF for legacy persistent organic pollutants (POPs) were analyzed for comparison. Both decamethylcyclopentasiloxane (D5) and dodecamethylcyclohexasiloxane (D6) biomagnified with TMFs of 2.9 (2.1-4.0) and 2.3 (1.8-3.0), respectively. Octamethylcyclotetrasiloxane (D4) was below the LOQ in the majority of samples and had substantially lower biomagnification than for D5 and D6. The cVMS TMFs did not differ between the lakes, whereas the legacy POP TMFs were higher in Mjøsa than inRandsfjorden. Whitefish had lower cVMS bioaccumulation compared to legacy POPs, and affected the TMF significance for cVMS, but not for POPs. TMFs of D5 and legacy contaminants in Lake Mjøsa were consistent with those previously measured in Mjøsa.

The Visiting Medical Student Clerkship Program at Mayo Clinic

PubMed Central

Mueller, Paul S.; McConahey, Linda L.; Orvidas, Laura J.; Jenkins, Sarah M.; Kasten, Mary J.

2010-01-01

OBJECTIVE: To describe the history, objectives, statistics, and initiatives used to address challenges associated with the Mayo Clinic Visiting Medical Student (VMS) Clerkship Program. MATERIALS AND METHODS: Mayo Clinic administrative records were reviewed for calendar years 1995 through 2008 to determine the effect of interventions to increase the numbers of appropriately qualified international VMSs and underrepresented minority VMSs. For numerical data, descriptive statistics were used; for comparisons, χ2 tests were performed. RESULTS: During the specified period, 4908 VMSs participated in the Mayo VMS Program (yearly mean [SD], 351 [24]). Most students were from US medical schools (3247 [66%]) and were male (3084 [63%]). Overall, 3101 VMSs (63%) applied for and 935 (30%) were appointed to Mayo Clinic residency program positions. Interventions to address the challenge of large numbers of international students who participated in our VMS program but did not apply for Mayo residency positions resulted in significantly fewer international students participating in our VMS program (P<.001), applying for Mayo residency program positions (P<.001), and being appointed to residency positions (P=.001). Interventions to address the challenge of low numbers of underrepresented minority students resulted in significantly more of these students participating in our VMS program (P=.005), applying for Mayo residency positions (P=.008), and being appointed to residency positions (P=.04). CONCLUSION: Our findings suggest that specific interventions can affect the characteristics of students who participate in VMS programs and who apply for and are appointed to residency program positions. PMID:20675510

The visiting medical student clerkship program at Mayo Clinic.

PubMed

Mueller, Paul S; McConahey, Linda L; Orvidas, Laura J; Jenkins, Sarah M; Kasten, Mary J

2010-08-01

To describe the history, objectives, statistics, and initiatives used to address challenges associated with the Mayo Clinic Visiting Medical Student (VMS) Clerkship Program. Mayo Clinic administrative records were reviewed for calendar years 1995 through 2008 to determine the effect of interventions to increase the numbers of appropriately qualified international VMSs and underrepresented minority VMSs. For numerical data, descriptive statistics were used; for comparisons, chi(2) tests were performed. During the specified period, 4908 VMSs participated in the Mayo VMS Program (yearly mean [SD], 351 [24]). Most students were from US medical schools (3247 [66%]) and were male (3084 [63%]). Overall, 3101 VMSs (63%) applied for and 935 (30%) were appointed to Mayo Clinic residency program positions. Interventions to address the challenge of large numbers of international students who participated in our VMS program but did not apply for Mayo residency positions resulted in significantly fewer international students participating in our VMS program (P<.001), applying for Mayo residency program positions (P<.001), and being appointed to residency positions (P=.001). Interventions to address the challenge of low numbers of underrepresented minority students resulted in significantly more of these students participating in our VMS program (P=.005), applying for Mayo residency positions (P=.008), and being appointed to residency positions (P=.04). Our findings suggest that specific interventions can affect the characteristics of students who participate in VMS programs and who apply for and are appointed to residency program positions.

Menopausal vasomotor symptoms are associated with poor self-assessed work ability.

PubMed

Gartoulla, Pragya; Bell, Robin J; Worsley, Roisin; Davis, Susan R

2016-05-01

It has been hypothesised that vasomotor symptoms (VMS), the hallmark of menopause, may affect women's workplace performance. The aim of this study was to investigate the association between VMS and self-reported work ability, taking into account socio-demographic characteristics. Study design/Main Outcome measures: A national cross-sectional survey of women, aged 40-65 years, was conducted between October 2013 and March 2014. Participants provided socio-demographic and lifestyle factors and completed the Menopause Specific Quality of Life Questionnaire (MENQOL) and the Work Ability Index (WAI). Of 2020 women who comprised the study sample, 1274 were in paid employment and 1263 completed the WAI. The WAI score was good-excellent for 81.5% of women and poor-moderate for 18.5%. After adjustment for socio-demographic characteristics, having any VMS was associated with greater likelihood of poor-moderate work ability [odds ratio (OR)=2.45, 95% CI 1.69-3.54]. Poorer work ability was significantly and independently associated with being un-partnered, obese or overweight, smoking, being carer and having insecure housing finance, but not with age. Overall, most women functioned well at work. We observed an association suggesting a relationship not only between menopausal VMS and personal wellbeing, but also between VMS and self-assessed work ability. Although 4 in 5 women functioned well at work, recognition of the association with VMS may improve wellbeing and work performance of working women at midlife. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Technical Aspects of Interfacing MUMPS to an External SQL Relational Database Management System

PubMed Central

Kuzmak, Peter M.; Walters, Richard F.; Penrod, Gail

1988-01-01

This paper describes an interface connecting InterSystems MUMPS (M/VX) to an external relational DBMS, the SYBASE Database Management System. The interface enables MUMPS to operate in a relational environment and gives the MUMPS language full access to a complete set of SQL commands. MUMPS generates SQL statements as ASCII text and sends them to the RDBMS. The RDBMS executes the statements and returns ASCII results to MUMPS. The interface suggests that the language features of MUMPS make it an attractive tool for use in the relational database environment. The approach described in this paper separates MUMPS from the relational database. Positioning the relational database outside of MUMPS promotes data sharing and permits a number of different options to be used for working with the data. Other languages like C, FORTRAN, and COBOL can access the RDBMS database. Advanced tools provided by the relational database vendor can also be used. SYBASE is an advanced high-performance transaction-oriented relational database management system for the VAX/VMS and UNIX operating systems. SYBASE is designed using a distributed open-systems architecture, and is relatively easy to interface with MUMPS.

Handling qualities of a wide-body transport airplane utilizing Pitch Active Control Systems (PACS) for relaxed static stability application

NASA Technical Reports Server (NTRS)

Grantham, William D.; Person, Lee H., Jr.; Brown, Philip W.; Becker, Lawrence E.; Hunt, George E.; Rising, J. J.; Davis, W. J.; Willey, C. S.; Weaver, W. A.; Cokeley, R.

1985-01-01

Piloted simulation studies have been conducted to evaluate the effectiveness of two pitch active control systems (PACS) on the flying qualities of a wide-body transport airplane when operating at negative static margins. These two pitch active control systems consisted of a simple 'near-term' PACS and a more complex 'advanced' PACS. Eight different flight conditions, representing the entire flight envelope, were evaluated with emphasis on the cruise flight conditions. These studies were made utilizing the Langley Visual/Motion Simulator (VMS) which has six degrees of freedom. The simulation tests indicated that (1) the flying qualities of the baseline aircraft (PACS off) for the cruise and other high-speed flight conditions were unacceptable at center-of-gravity positions aft of the neutral static stability point; (2) within the linear static stability flight envelope, the near-term PACS provided acceptable flying qualities for static stabilty margins to -3 percent; and (3) with the advanced PACS operative, the flying qualities were demonstrated to be good (satisfactory to very acceptable) for static stabilty margins to -20 percent.

ROSAT Science Data Center

NASA Technical Reports Server (NTRS)

Murray, Stephen; Pisarski, Ryszard L. (Technical Monitor)

2001-01-01

This report provides a summary of the Smithsonian Astrophysical Observatory (SAO) ROSAT SCIENCE DATA CENTER (RSDC) activities for the recent years of our contract. Details have already been reported in the monthly reports. The SAO was responsible for the High Resolution Imager (HRI) detector on ROSAT. We also provided and supported the HRI standard analysis software used in the pipeline processing (SASS). Working with our colleagues at the Max Planck in Garching Germany (MPE), we fixed bugs and provided enhancements. The last major effort in this area was the port from VMS/VAX to VMS/ALPHA architecture. In 1998, a timing bug was found in the HRI standard processing system which degraded the positional accuracy because events accessed incorrect aspect solutions. The bug was fixed and we developed off-line correction routines and provided them to the community. The Post Reduction Off-line Software (PROS) package was developed by SAO and runs in the IRAF environment. Although in recent years PROS was not a contractual responsibility of the RSDC, we continued to maintain the system and provided new capabilities such as the ability to deal with simulated AXAF data in preparation for the NASA call for proposals for Chandra. Our most recent activities in this area included the debugging necessary for newer versions of IRAF which broke some of our software. At SAO we have an operating version of PROS and hope to release a patch even though almost all functionality that was lost was subsequently recovered via an IRAF patch (i.e. most of our problems were caused by an IRAF bug).

Atmospheric concentrations and trends of poly- and perfluoroalkyl substances (PFAS) and volatile methyl siloxanes (VMS) over 7 years of sampling in the Global Atmospheric Passive Sampling (GAPS) network.

PubMed

Rauert, Cassandra; Shoieb, Mahiba; Schuster, Jasmin K; Eng, Anita; Harner, Tom

2018-07-01

Poly- and per-fluoroalkyl substances (PFAS) and volatile methyl siloxanes (VMS) were monitored at 21 sites in the Global Atmospheric Passive Sampling (GAPS) Network. Atmospheric concentrations previously reported from 2009 were compared to concentrations measured at these sites in 2013 and 2015, to assess trends over 7 years of monitoring. Concentrations of the fluorotelomer alcohols (FTOHs) and fluorinated sulfonamides and sulfonamidoethanols (FOSAs and FOSEs) were stable at these sites from 2009 to 2015 with no significant difference (p > 0.05) in concentrations. Elevated concentrations of all the neutral PFAS were detected at the urban sites as compared to the polar/background sites. The perfluorosulfonic acids (PFSAs), meanwhile, saw a significant increase (p < 0.001) in concentrations from 2009 to 2015. The perfluorocarboxylic acids (PFCAs) had elevated concentrations in 2015, however, the difference was not statistically significant (p > 0.05). Concentrations of the PFSAs and the PFCAs were similar at all location types, showing the global reach of these persistent compounds. Concentrations of the cyclic VMS (cVMS) were at least an order of magnitude higher than the linear VMS (lVMS) and the PFAS. Octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5) and dodecamethylcyclohexasiloxane (D6) saw a weak significant increase in concentrations from 2009 to 2013 (p < 0.05), however, hexamethylcyclotrisiloxane (D3) had a strong significant decrease in concentrations from 2009 to 2015 (p < 0.01). Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Acupuncture in Menopause (AIM) study: a pragmatic, randomized controlled trial.

PubMed

Avis, Nancy E; Coeytaux, Remy R; Isom, Scott; Prevette, Kristen; Morgan, Timothy

2016-06-01

The aim of the study was to evaluate the short and long-term effects of acupuncture on vasomotor symptoms (VMS) and quality of life-related measures. A total of 209 perimenopausal and postmenopausal women aged 45 to 60 years, experiencing four or more VMS per day, were recruited from the community and randomized to receive up to 20 acupuncture treatments within the first 6 months (acupuncture group) or the second 6 months (waitlist control group) of the 12-month study period. The primary outcome was mean daily frequency of VMS. Secondary outcomes were VMS interference with daily life, sleep quality, depressive symptoms, somatic and other symptoms, anxiety, and quality of life. The VMS frequency declined by 36.7% at 6 months in the acupuncture group and increased by 6.0% in the control group (P < 0.001 for between-group comparison). At 12 months, the reduction from baseline in the acupuncture group was 29.4% (P < 0.001 for within-group comparison from baseline to 12 months), suggesting that the reduction was largely maintained after treatment. Statistically significant clinical improvement was observed after three acupuncture treatments, and maximal clinical effects occurred after a median of eight treatments. Persistent improvements were seen in many quality of life-related outcomes in the acupuncture group relative to the control group. We found that a course of acupuncture treatments was associated with significant reduction in VMS, and several quality-of-life measures, compared with no acupuncture, and that clinical benefit persisted for at least 6 months beyond the end of treatment.

Real-Time Optimization for use in a Control Allocation System to Recover from Pilot Induced Oscillations

NASA Technical Reports Server (NTRS)

Leonard, Michael W.

2013-01-01

Integration of the Control Allocation technique to recover from Pilot Induced Oscillations (CAPIO) System into the control system of a Short Takeoff and Landing Mobility Concept Vehicle simulation presents a challenge because the CAPIO formulation requires that constrained optimization problems be solved at the controller operating frequency. We present a solution that utilizes a modified version of the well-known L-BFGS-B solver. Despite the iterative nature of the solver, the method is seen to converge in real time with sufficient reliability to support three weeks of piloted runs at the NASA Ames Vertical Motion Simulator (VMS) facility. The results of the optimization are seen to be excellent in the vast majority of real-time frames. Deficiencies in the quality of the results in some frames are shown to be improvable with simple termination criteria adjustments, though more real-time optimization iterations would be required.

Visiting medical student elective and clerkship programs: a survey of US and Puerto Rico allopathic medical schools

PubMed Central

2010-01-01

Background No published reports of studies have provided aggregate data on visiting medical student (VMS) programs at allopathic medical schools. Methods During 2006, a paper survey was mailed to all 129 allopathic medical schools in the United States and Puerto Rico using a list obtained from the Association of American Medical Colleges. Contents of the survey items were based on existing literature and expert opinion and addressed various topics related to VMS programs, including organizational aspects, program objectives, and practical issues. Responses to the survey items were yes-or-no, multiple-choice, fill-in-the-blank, and free-text responses. Data related to the survey responses were summarized using descriptive statistics. Results Representatives of 76 schools (59%) responded to the survey. Of these, 73 (96%) reported their schools had VMS programs. The most common reason for having a VMS program was "recruitment for residency programs" (90%). "Desire to do a residency at our institution" was ranked as the leading reason visiting medical students choose to do electives or clerkships. In descending order, the most popular rotations were in internal medicine, orthopedic surgery, emergency medicine, and pediatrics. All VMS programs allowed fourth-year medical students, and approximately half (58%) allowed international medical students. The most common eligibility requirements were documentation of immunizations (92%), previous clinical experience (85%), and successful completion of United States Medical Licensing Examination Step 1 (51%). Of the programs that required clinical experience, 82% required 33 weeks or more. Most institutions (96%) gave priority for electives and clerkships to their own students over visiting students, and a majority (78%) reported that visiting students were evaluated no differently than their own students. During academic year 2006-2007, the number of new resident physicians who were former visiting medical students ranged widely among the responding institutions (range, 0-76). Conclusions Medical schools' leading reason for having VMS programs is recruitment into residency programs and the most commonly cited reason students participate in these programs is to secure residency positions. However, further research is needed regarding factors that determine the effectiveness of VMS programs in residency program recruitment and the development of more universal standards for VMS eligibility requirements and assessment. PMID:20529301

Nonhormonal management of menopause-associated vasomotor symptoms: 2015 position statement of The North American Menopause Society.

PubMed

2015-11-01

To update and expand The North American Menopause Society's evidence-based position on nonhormonal management of menopause-associated vasomotor symptoms (VMS), previously a portion of the position statement on the management of VMS. NAMS enlisted clinical and research experts in the field and a reference librarian to identify and review available evidence. Five different electronic search engines were used to cull relevant literature. Using the literature, experts created a document for final approval by the NAMS Board of Trustees. Nonhormonal management of VMS is an important consideration when hormone therapy is not an option, either because of medical contraindications or a woman's personal choice. Nonhormonal therapies include lifestyle changes, mind-body techniques, dietary management and supplements, prescription therapies, and others. The costs, time, and effort involved as well as adverse effects, lack of long-term studies, and potential interactions with medications all need to be carefully weighed against potential effectiveness during decision making. Clinicians need to be well informed about the level of evidence available for the wide array of nonhormonal management options currently available to midlife women to help prevent underuse of effective therapies or use of inappropriate or ineffective therapies. Recommended: Cognitive-behavioral therapy and, to a lesser extent, clinical hypnosis have been shown to be effective in reducing VMS. Paroxetine salt is the only nonhormonal medication approved by the US Food and Drug Administration for the management of VMS, although other selective serotonin reuptake/norepinephrine reuptake inhibitors, gabapentinoids, and clonidine show evidence of efficacy. Recommend with caution: Some therapies that may be beneficial for alleviating VMS are weight loss, mindfulness-based stress reduction, the S-equol derivatives of soy isoflavones, and stellate ganglion block, but additional studies of these therapies are warranted. Do not recommend at this time: There are negative, insufficient, or inconclusive data suggesting the following should not be recommended as proven therapies for managing VMS: cooling techniques, avoidance of triggers, exercise, yoga, paced respiration, relaxation, over-the-counter supplements and herbal therapies, acupuncture, calibration of neural oscillations, and chiropractic interventions. Incorporating the available evidence into clinical practice will help ensure that women receive evidence-based recommendations along with appropriate cautions for appropriate and timely management of VMS.

Study of the human/ITS interface issues on the design of traffic information bulletin board and traffic control signal displays

DOT National Transportation Integrated Search

2002-10-01

The success of automation for intelligent transportation systems is ultimately contingent upon the Interface between the users (humans) and the system (ITS). The issues of variable message signs (VMS) and traffic signal device (TSD) design were studi...

50 CFR 300.101 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... returns to port and at all points in between. Real-time means as soon as possible, but at least every 4... paragraph (1) of this definition. Centralized Vessel Monitoring System (C-VMS) means a system that uses... weight, at any time, of the catch on board the vessel. Dissostichus catch document (DCD) means the...

50 CFR 300.101 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... returns to port and at all points in between. Real-time means as soon as possible, but at least every 4... paragraph (1) of this definition. Centralized Vessel Monitoring System (C-VMS) means a system that uses... weight, at any time, of the catch on board the vessel. Dissostichus catch document (DCD) means the...

COLDMON -- Cold File Analysis Package

NASA Astrophysics Data System (ADS)

Rawlinson, D. J.

The COLDMON package has been written to allow system managers to identify those items of software that are not used (or used infrequently) on their systems. It consists of a few command procedures and a Fortran program to analyze the results. It makes use of the AUDIT facility and security ACLs in VMS.

50 CFR 300.101 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... returns to port and at all points in between. Real-time means as soon as possible, but at least every 4... paragraph (1) of this definition. Centralized Vessel Monitoring System (C-VMS) means a system that uses... weight, at any time, of the catch on board the vessel. Dissostichus catch document (DCD) means the...

Volcanogenic Massive Sulfide Deposits of the World - Database and Grade and Tonnage Models

USGS Publications Warehouse

Mosier, Dan L.; Berger, Vladimir I.; Singer, Donald A.

2009-01-01

Grade and tonnage models are useful in quantitative mineral-resource assessments. The models and database presented in this report are an update of earlier publications about volcanogenic massive sulfide (VMS) deposits. These VMS deposits include what were formerly classified as kuroko, Cyprus, and Besshi deposits. The update was necessary because of new information about some deposits, changes in information in some deposits, such as grades, tonnages, or ages, revised locations of some deposits, and reclassification of subtypes. In this report we have added new VMS deposits and removed a few incorrectly classified deposits. This global compilation of VMS deposits contains 1,090 deposits; however, it was not our intent to include every known deposit in the world. The data was recently used for mineral-deposit density models (Mosier and others, 2007; Singer, 2008). In this paper, 867 deposits were used to construct revised grade and tonnage models. Our new models are based on a reclassification of deposits based on host lithologies: Felsic, Bimodal-Mafic, and Mafic volcanogenic massive sulfide deposits. Mineral-deposit models are important in exploration planning and quantitative resource assessments for two reasons: (1) grades and tonnages among deposit types vary significantly, and (2) deposits of different types occur in distinct geologic settings that can be identified from geologic maps. Mineral-deposit models combine the diverse geoscience information on geology, mineral occurrences, geophysics, and geochemistry used in resource assessments and mineral exploration. Globally based deposit models allow recognition of important features and demonstrate how common different features are. Well-designed deposit models allow geologists to deduce possible mineral-deposit types in a given geologic environment and economists to determine the possible economic viability of these resources. Thus, mineral-deposit models play a central role in presenting geoscience information in a useful form to policy makers. The foundation of mineral-deposit models is information about known deposits. The purpose of this publication is to present the latest geologic information and newly developed grade and tonnage models for VMS deposits in digital form. This publication contains computer files with information on VMS deposits from around the world. It also presents new grade and tonnage models for three subtypes of VMS deposits and a text file allowing locations of all deposits to be plotted in geographic information system (GIS) programs. The data are presented in FileMaker Pro and text files to make the information available to a wider audience. The value of this information and any derived analyses depends critically on the consistent manner of data gathering. For this reason, we first discuss the rules used in this compilation. Next, we provide new grade and tonnage models and analysis of the information in the file. Finally, the fields of the data file are explained. Appendix A gives the summary statistics for the new grade-tonnage models and Appendix B displays the country codes used in the database.

77 FR 26513 - Proposed Information Collection; Comment Request; Southeast Region Vessel Monitoring System (VMS...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-04

... restrictions through remote sensing methods. In addition, all fishing gears are subject to some area fishing...) ways to minimize the burden of the collection of information on respondents, including through the use...

Filling the gap: Using fishers' knowledge to map the extent and intensity of fishing activity.

PubMed

Szostek, Claire L; Murray, Lee G; Bell, Ewen; Kaiser, Michel J

2017-08-01

Knowledge of the extent and intensity of fishing activities is critical to inform management in relation to fishing impacts on marine conservation features. Such information can also provide insight into the potential socio-economic impacts of closures (or other restrictions) of fishing grounds that could occur through the future designation of Marine Conservation Zones (MCZs). We assessed the accuracy and validity of fishing effort data (spatial extent and relative effort) obtained from Fishers' Local Knowledge (LK) data compared to that derived from Vessel Monitoring System (VMS) data for a high-value shellfish fishery, the king scallop (Pecten maximus L.) dredge fishery in the English Channel. The spatial distribution of fishing effort from LK significantly correlated with VMS data and the correlation increased with increasing grid cell resolution. Using a larger grid cell size for data aggregation increases the estimation of the total area of seabed impacted by the fishery. In the absence of historical VMS data for vessels ≤15 m LOA (Length Overall), LK data for the inshore fleet provided important insights into the relative effort of the inshore (<6 NM from land) king scallop fishing fleet in the English Channel. The LK data provided a good representation of the spatial extent of inshore fishing activity, whereas representation of the offshore fishery was more precautionary in terms of defining total impact. Significantly, the data highlighted frequently fished areas of particular importance to the inshore fleet. In the absence of independent sources of geospatial information, the use of LK can inform the development of marine planning in relation to both sustainable fishing and conservation objectives, and has application in both developed and developing countries where VMS technology is not utilised in fisheries management. Copyright © 2017 Elsevier Ltd. All rights reserved.

Optimal Monochromatic Energy Levels in Spectral CT Pulmonary Angiography for the Evaluation of Pulmonary Embolism

PubMed Central

Wu, Huawei; Zhang, Qing; Hua, Jia; Hua, Xiaolan; Xu, Jianrong

2013-01-01

Background The aim of this study was to determine the optimal monochromatic spectral CT pulmonary angiography (sCTPA) levels to obtain the highest image quality and diagnostic confidence for pulmonary embolism detection. Methods The Institutional Review Board of the Shanghai Jiao Tong University School of Medicine approved this study, and written informed consent was obtained from all participating patients. Seventy-two patients with pulmonary embolism were scanned with spectral CT mode in the arterial phase. One hundred and one sets of virtual monochromatic spectral (VMS) images were generated ranging from 40 keV to 140 keV. Image noise, clot diameter and clot to artery contrast-to-noise ratio (CNR) from seven sets of VMS images at selected monochromatic levels in sCTPA were measured and compared. Subjective image quality and diagnostic confidence for these images were also assessed and compared. Data were analyzed by paired t test and Wilcoxon rank sum test. Results The lowest noise and the highest image quality score for the VMS images were obtained at 65 keV. The VMS images at 65 keV also had the second highest CNR value behind that of 50 keV VMS images. There was no difference in the mean noise and CNR between the 65 keV and 70 keV VMS images. The apparent clot diameter correlated with the keV levels. Conclusions The optimal energy level for detecting pulmonary embolism using dual-energy spectral CT pulmonary angiography was 65–70 keV. Virtual monochromatic spectral images at approximately 65–70 keV yielded the lowest image noise, high CNR and highest diagnostic confidence for the detection of pulmonary embolism. PMID:23667583

A Flexible Sensing Unit Manufacturing Method of Electrochemical Seismic Sensor

PubMed Central

Li, Guanglei; Sun, Zhenyuan; Wang, Junbo; Chen, Deyong; Chen, Lianhong; Xu, Chao; Qi, Wenjie; Zheng, Yu

2018-01-01

This paper presents an electrochemical seismic sensor in which paraylene was used as a substrate and insulating layer of micro-fabricated electrodes, enabling the detection of seismic signals with enhanced sensitivities in comparison to silicon-based counterparts. Based on microfabrication, paralene-based electrochemical seismic sensors were fabricated in which the thickness of the insulating spacer was 6.7 μm. Compared to silicon-based counterparts with ~100 μm insulating layers, the parylene-based devices produced higher sensitivities of 490.3 ± 6.1 V/(m/s) vs. 192.2 ± 1.9 V/(m/s) at 0.1 Hz, 4764.4 ± 18 V/(m/s) vs. 318.9 ± 6.5 V/(m/s) at 1 Hz, and 4128.1 ± 38.3 V/(m/s) vs. 254.5 ± 4.2 V/(m/s) at 10 Hz. In addition, the outputs of the parylene vs. silicon devices in response to two transit inputs were compared, producing peak responses of 2.97 V vs. 0.22 V and 2.41 V vs. 0.19 V, respectively. Furthermore, the self-noises of parylene vs. silicon-based devices were compared as follows: −82.3 ± 3.9 dB vs. −90.4 ± 9.4 dB at 0.1 Hz, −75.7 ± 7.3 dB vs. −98.2 ± 9.9 dB at 1 Hz, and −62.4 ± 7.7 dB vs. −91.1 ± 8.1 dB at 10 Hz. The developed parylene-based electrochemical seismic sensors may function as an enabling technique for further detection of seismic motions in various applications. PMID:29641455

Effect of longitudinal anatomical mismatch of stenting on the mechanical environment in human carotid artery with atherosclerotic plaques.

PubMed

Fan, Zhenmin; Liu, Xiao; Sun, Anqiang; Zhang, Nan; Fan, Zhanming; Fan, Yubo; Deng, Xiaoyan

2017-10-01

Longitudinal anatomic mismatch (LAM) of stenting (i.e., a stenotic artery segment is not fully covered by a deployed stent) worsens the mechanical environment in the treated artery, which most likely is the cause for the associated high risks of restenosis, myocardial infarction and stent thrombosis. To probe the possibility, we constructed a patient-specific carotid model with two components of plaques (lipid and calcified plaque) based on MRI images; we numerically compared three different stenting scenarios in terms of von Mises stress (VMS) distribution in the treated arteries, namely, the short stenting (LAM), the medium stenting and the long stenting. The results showed that the short stenting led to more areas with abnormally high VMS along the inner surface of the treated artery with a much higher surface-averaged VMS at the distal end of the stent than both the medium and long stenting. While the VMS distribution in the calcified plaques was similar for the three stenting models, it was quite different in the lipid plaques among the three stenting models. The lipid plaque of the short-stent model showed more volume of the lipid plaque subjected to high VMS than those of the other two models. Based on the obtained results, we may infer that the short stenting (i.e., LAM) may aggravate vascular injury due to high VMS on the artery-stent interaction surface and within the lipid plaque. Therefore, to obtain a better outcome, a longer stent, rather than a short one, might be needed for arterial stenting. Copyright © 2017 IPEM. Published by Elsevier Ltd. All rights reserved.

Determination of soil–water sorption coefficients of volatile methylsiloxanes

PubMed Central

Kozerski, Gary E; Xu, Shihe; Miller, Julie; Durham, Jeremy

2014-01-01

The sorption behaviors of 4 cyclic and linear volatile methyl siloxane (VMS) compounds between water and organic matter in 3 United Kingdom soils were studied by a batch equilibrium method using13C-enriched sorbates. Sorption and desorption kinetics and isotherms were determined for octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5), octamethyltrisiloxane (L3), and decamethyltetrasiloxane (L4). Concentrations of [13C]-VMS in the soil and aqueous phases were measured directly by extraction and gas chromatography–mass spectrometry techniques. All VMS compounds were sorbed rapidly, reaching constant distributions in all soils by 24 h. Desorption kinetics were very rapid, with reattainment of equilibrium within 1 h. In the main, linear isotherms were observed for aqueous concentrations at or below 4% of the solubility limits. The average sorption organic carbon partition coefficient (log KOC) values across soils were 4.23 for D4, 5.17 for D5, 4.32 for L3, and 5.13 for L4, with standard deviations of 0.09 to 0.34. Desorption KOC values were systematically greater by 0.1 log units to 0.3 log units. The linear isotherms and low variation in KOC values across soils suggested partitioning-dominated sorption of the VMS. Compared with traditional hydrophobic organic compounds, KOC values for the VMS compounds were significantly lower than expected on the basis of their octanol–water partition coefficients. A linear free energy relationship analysis showed that these differences could be rationalized quantitatively in terms of the inherent characteristics of the VMS compounds, combined with the differences in solvation properties of organic matter and octanol. Environ Toxicol Chem 2014; 33:1937–1945. PMID:24862578

DET/MPS - The GSFC Energy Balance Programs

NASA Technical Reports Server (NTRS)

Jagielski, J. M.

1994-01-01

Direct Energy Transfer (DET) and MultiMission Spacecraft Modular Power System (MPS) computer programs perform mathematical modeling and simulation to aid in design and analysis of DET and MPS spacecraft power system performance in order to determine energy balance of subsystem. DET spacecraft power system feeds output of solar photovoltaic array and nickel cadmium batteries directly to spacecraft bus. MPS system, Standard Power Regulator Unit (SPRU) utilized to operate array at array's peak power point. DET and MPS perform minute-by-minute simulation of performance of power system. Results of simulation focus mainly on output of solar array and characteristics of batteries. Both packages limited in terms of orbital mechanics, they have sufficient capability to calculate data on eclipses and performance of arrays for circular or near-circular orbits. DET and MPS written in FORTRAN-77 with some VAX FORTRAN-type extensions. Both available in three versions: GSC-13374, for DEC VAX-series computers running VMS. GSC-13443, for UNIX-based computers. GSC-13444, for Apple Macintosh computers.

Using virtual machine monitors to overcome the challenges of monitoring and managing virtualized cloud infrastructures

NASA Astrophysics Data System (ADS)

Bamiah, Mervat Adib; Brohi, Sarfraz Nawaz; Chuprat, Suriayati

2012-01-01

Virtualization is one of the hottest research topics nowadays. Several academic researchers and developers from IT industry are designing approaches for solving security and manageability issues of Virtual Machines (VMs) residing on virtualized cloud infrastructures. Moving the application from a physical to a virtual platform increases the efficiency, flexibility and reduces management cost as well as effort. Cloud computing is adopting the paradigm of virtualization, using this technique, memory, CPU and computational power is provided to clients' VMs by utilizing the underlying physical hardware. Beside these advantages there are few challenges faced by adopting virtualization such as management of VMs and network traffic, unexpected additional cost and resource allocation. Virtual Machine Monitor (VMM) or hypervisor is the tool used by cloud providers to manage the VMs on cloud. There are several heterogeneous hypervisors provided by various vendors that include VMware, Hyper-V, Xen and Kernel Virtual Machine (KVM). Considering the challenge of VM management, this paper describes several techniques to monitor and manage virtualized cloud infrastructures.

History of vasomotor symptoms, extent of coronary artery disease, and clinical outcomes after acute coronary syndrome in postmenopausal women.

PubMed

Ferri, Luca A; Morici, Nuccia; Bassanelli, Giorgio; Franco, Nicoletta; Misuraca, Leonardo; Lenatti, Laura; Jacono, Emilia Lo; Leuzzi, Chiara; Corrada, Elena; Aranzulla, Tiziana C; Colombo, Delia; Cagnacci, Angelo; Prati, Francesco; Savonitto, Stefano

2018-06-01

Vasomotor symptoms (VMS) during menopausal transition have been linked to a higher burden of cardiovascular risk factors, subclinical vascular disease, and subsequent vascular events. We aim to investigate the association of VMS with the extent of coronary disease and their prognostic role after an acute coronary syndrome. The Ladies Acute Coronary Syndrome study enrolled consecutive women with an acute coronary syndrome undergoing coronary angiography. A menopause questionnaire was administered during admission. Angiographic data underwent corelab analysis. Six out of 10 enrolling centers participated in 1-year follow-up. Outcome data included the composite endpoint of all-cause mortality, recurrent myocardial infarction, stroke, and rehospitalization for cardiovascular causes within 1 year. Of the 415 women with available angiographic corelab analysis, 373 (90%) had complete 1-year follow-up. Among them, 202 women had had VMS during menopausal transition. These women had the same mean age at menopause as those without VMS (50 years in both groups), but were younger at presentation (median age 71 vs 76 years; P < 0.001), despite a more favorable cardiovascular risk profile (chronic kidney dysfunction 4.5% vs 15.9%; P = 0.001; prior cerebrovascular disease 4.5 vs 12.2%; P = 0.018). Extent of coronary disease at angiography was similar between groups (mean Gensini score 49 vs 51; P = 0.6; mean SYNTAX score 14 vs 16; P = 0.3). Overall cardiovascular events at 1 year did not differ between groups (19% vs 22%; P = 0.5). In postmenopausal women with an acute coronary syndrome, a history of VMS was associated with younger age at presentation, despite a lower vascular disease burden and similar angiographically defined coronary disease as compared with women without VMS. No difference could be found in terms of overall clinical outcomes. These results should be interpreted cautiously as all analyses were unadjusted and did not account for risk factor differences between women with and without a history of VMS.

Volatile methyl siloxanes (VMS) concentrations in outdoor air of several Catalan urban areas

NASA Astrophysics Data System (ADS)

Gallego, E.; Perales, J. F.; Roca, F. J.; Guardino, X.; Gadea, E.

2017-04-01

Volatile methyl siloxanes (VMS) were evaluated in ten Catalan urban areas with different industrial impacts, such as petrochemical industry, electrical and mechanical equipment, metallurgical and chemical industries, municipal solid waste treatment plant and cement and food industries, during 2013-2015. 24 h samples were taken with LCMA-UPC pump samplers specially designed in our laboratory, with a flow range of 70 ml min-1. A sorbent-based sampling method, successfully developed to collect a wide-range of VOC, was used. The analysis was performed by automatic thermal desorption coupled with capillary gas chromatography/mass spectrometry detector. The presented methodology allows the evaluation of VMS together with a wide range of other VOC, increasing the number of compounds that can be determined in outdoor air quality assessment of urban areas. This aspect is especially relevant as a restriction of several VMS (D4 and D5) in consumer products has been made by the European Chemicals Agency and US EPA is evaluating to include D4 in the Toxic Substances Control Act, regarding the concern of the possible effects of these compounds in human health and the environment. ΣVMS concentrations (L2-L5, D3-D6 and trimethylsilanol) varied between 0.3 ± 0.2 μg m-3 and 18 ± 12 μg m-3, determined in a hotspot area. Observed VMS concentrations were generally of the same order of magnitude than the previously determined in Barcelona, Chicago and Zurich urban areas, but higher than the published from suburban sites and Arctic locations. Cyclic siloxanes concentrations were up to two-three orders of magnitude higher than those of linear siloxanes, accounting for average contributions to the total concentrations of 97 ± 6% for all samples except for the hotspot area, where cyclic VMS accounted for 99.9 ± 0.1%. D5 was the most abundant siloxane in 5 sampling points; however, differing from the generally observed in previous studies, D3 was the most abundant compound in the other 5 sampling points.

75 FR 3180 - Magnuson-Stevens Fishery Conservation and Management Act Provisions; Fisheries of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-20

... Monitoring Systems (VMS), it is projected that, given current fishing activity levels of IFQ scallop vessels... activity in the LAGC fishery authorize vessels issued a valid IFQ scallop permit to fish in the LAGC...

Multi-Modal Traveler Information System - VMS/HAR State-of-the-Practice

DOT National Transportation Integrated Search

1997-05-30

The Gary-Chicago-Milwaukee (GCM) Corridor is one of the four "Priority Corridors" established by the United States Congress in the Inter-Modal Surface Transportation Efficiency Act (ISTEA). These corridors have been selected for special federal trans...

Evolution and fate of very massive stars

NASA Astrophysics Data System (ADS)

Yusof, Norhasliza; Hirschi, Raphael; Meynet, Georges; Crowther, Paul A.; Ekström, Sylvia; Frischknecht, Urs; Georgy, Cyril; Abu Kassim, Hasan; Schnurr, Olivier

2013-08-01

There is observational evidence that supports the existence of very massive stars (VMS) in the local universe. First, VMS (Mini ≲ 320 M⊙) have been observed in the Large Magellanic Clouds (LMC). Secondly, there are observed supernovae (SNe) that bear the characteristics of pair creation supernovae (PCSNe, also referred to as pair instability SN) which have VMS as progenitors. The most promising candidate to date is SN 2007bi. In order to investigate the evolution and fate of nearby VMS, we calculated a new grid of models for such objects, for solar, LMC and Small Magellanic Clouds (SMC) metallicities, which covers the initial mass range from 120 to 500 M⊙. Both rotating and non-rotating models were calculated using the GENEVA stellar evolution code and evolved until at least the end of helium burning and for most models until oxygen burning. Since VMS have very large convective cores during the main-sequence phase, their evolution is not so much affected by rotational mixing, but more by mass loss through stellar winds. Their evolution is never far from a homogeneous evolution even without rotational mixing. All the VMS, at all the metallicities studied here, end their life as WC(WO)-type Wolf-Rayet stars. Because of very important mass losses through stellar winds, these stars may have luminosities during the advanced phases of their evolution similar to stars with initial masses between 60 and 120 M⊙. A distinctive feature which may be used to disentangle Wolf-Rayet stars originating from VMS from those originating from lower initial masses would be the enhanced abundances of Ne and Mg at the surface of WC stars. This feature is however not always apparent depending on the history of mass loss. At solar metallicity, none of our models is expected to explode as a PCSN. At the metallicity of the LMC, only stars more massive than 300 M⊙ are expected to explode as PCSNe. At the SMC metallicity, the mass range for the PCSN progenitors is much larger and comprises stars with initial masses between about 100 and 290 M⊙. All VMS in the metallicity range studied here produce either a Type Ib SN or a Type Ic SN but not a Type II SN. We estimate that the progenitor of SN 2007bi, assuming a SMC metallicity, had an initial mass between 160 and 175 M⊙. None of models presented in this grid produces gamma-ray bursts or magnetars. They lose too much angular momentum by mass loss or avoid the formation of a black hole by producing a completely disruptive PCSN.

System-Level Virtualization for High Performance Computing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vallee, Geoffroy R; Naughton, III, Thomas J; Engelmann, Christian

2008-01-01

System-level virtualization has been a research topic since the 70's but regained popularity during the past few years because of the availability of efficient solution such as Xen and the implementation of hardware support in commodity processors (e.g. Intel-VT, AMD-V). However, a majority of system-level virtualization projects is guided by the server consolidation market. As a result, current virtualization solutions appear to not be suitable for high performance computing (HPC) which is typically based on large-scale systems. On another hand there is significant interest in exploiting virtual machines (VMs) within HPC for a number of other reasons. By virtualizing themore » machine, one is able to run a variety of operating systems and environments as needed by the applications. Virtualization allows users to isolate workloads, improving security and reliability. It is also possible to support non-native environments and/or legacy operating environments through virtualization. In addition, it is possible to balance work loads, use migration techniques to relocate applications from failing machines, and isolate fault systems for repair. This document presents the challenges for the implementation of a system-level virtualization solution for HPC. It also presents a brief survey of the different approaches and techniques to address these challenges.« less

Patterns in the spatial distribution of Peruvian anchovy ( Engraulis ringens) revealed by spatially explicit fishing data

NASA Astrophysics Data System (ADS)

Bertrand, Sophie; Díaz, Erich; Lengaigne, Matthieu

2008-10-01

Peruvian anchovy ( Engraulis ringens) stock abundance is tightly driven by the high and unpredictable variability of the Humboldt Current Ecosystem. Management of the fishery therefore cannot rely on mid- or long-term management policy alone but needs to be adaptive at relatively short time scales. Regular acoustic surveys are performed on the stock at intervals of 2 to 4 times a year, but there is a need for more time continuous monitoring indicators to ensure that management can respond at suitable time scales. Existing literature suggests that spatially explicit data on the location of fishing activities could be used as a proxy for target stock distribution. Spatially explicit commercial fishing data could therefore guide adaptive management decisions at shorter time scales than is possible through scientific stock surveys. In this study we therefore aim to (1) estimate the position of fishing operations for the entire fleet of Peruvian anchovy purse-seiners using the Peruvian satellite vessel monitoring system (VMS), and (2) quantify the extent to which the distribution of purse-seine sets describes anchovy distribution. To estimate fishing set positions from vessel tracks derived from VMS data we developed a methodology based on artificial neural networks (ANN) trained on a sample of fishing trips with known fishing set positions (exact fishing positions are known for approximately 1.5% of the fleet from an at-sea observer program). The ANN correctly identified 83% of the real fishing sets and largely outperformed comparative linear models. This network is then used to forecast fishing operations for those trips where no observers were onboard. To quantify the extent to which fishing set distribution was correlated to stock distribution we compared three metrics describing features of the distributions (the mean distance to the coast, the total area of distribution, and a clustering index) for concomitant acoustic survey observations and fishing set positions identified from VMS. For two of these metrics (mean distance to the coast and clustering index), fishing and survey data were significantly correlated. We conclude that the location of purse-seine fishing sets yields significant and valuable information on the distribution of the Peruvian anchovy stock and ultimately on its vulnerability to the fishery. For example, a high concentration of sets in the near coastal zone could potentially be used as a warning signal of high levels of stock vulnerability and trigger appropriate management measures aimed at reducing fishing effort.

Evaluation of RDBMS packages for use in astronomy

NASA Technical Reports Server (NTRS)

Page, C. G.; Davenhall, A. C.

1992-01-01

Tabular data sets arise in many areas of astronomical data analysis, from raw data (such as photon event lists) to final results (such as source catalogs). The Starlink catalog access and reporting package, SCAR, was originally developed to handle IRAS data and it has been the principal relational DBMS in the Starlink software collection for several years. But SCAR has many limitations and is VMS-specific, while Starlink is in transition from VMS to Unix. Rather than attempt a major re-write of SCAR for Unix, it seemed more sensible to see whether any existing database packages are suitable for general astronomical use. The authors first drew up a list of desirable properties for such a system and then used these criteria to evaluate a number of packages, both free ones and those commercially available. It is already clear that most commercial DBMS packages are not very well suited to the requirements; for example, most cannot carry out efficiently even fairly basic operations such as joining two catalogs on an approximate match of celestial positions. This paper reports the results of the evaluation exercise and notes the problems in using a standard DBMS package to process scientific data. In parallel with this the authors have started to develop a simple database engine that can handle tabular data in a range of common formats including simple direct-access files (such as SCAR and Exosat DBMS tables) and FITS tables (both ASCII and binary).

Virtual Museums as Digital Storytellers for Dissemination of Built Environment: Possible Narratives and Outlooks for Appealing and Rich Encounters with the Past

NASA Astrophysics Data System (ADS)

Caspani, S.; Brumana, R.; Oreni, D.; Previtali, M.

2017-08-01

Virtual Museums (VMs) have emerged from the ongoing crossbreeding process between museums and digital technologies as an additional "channel" for disseminating content and providing knowledge about cultural heritage. VMs is a concept still in definition, as this paper attempts to briefly retrace, the recognition of its potential has motivated our efforts for further developments. Core questions that motivated the first phase of the research presented have been: can digital storytelling become the key feature of future VMs? May narratives approach support communication and understanding of cultural heritage providing enriching encounters with the past? May complex systems, such as the built environment and landscape (characterized by space-time relations among elements, that are often difficult to read or appreciate) find in digital storytelling a method that exploits their values as documents and palimpsests of human history? Can an increased awareness of the past contribute to support a sense of belonging and identity construction? Which kind of stories can be currently designed with the existing tools? The paper, after an introductory overview, provides a tentative reply to these questions combining the main findings offered by a series of recent studies related to this scenario with some preliminary direct investigations and, eventually, it proposes some outlooks for future developments.

Absorption of a linear (L2) and a cyclic (D4) siloxane using different oils: application to biogas treatment.

PubMed

Rojas Devia, Carolina; Subrenat, Albert

2013-01-01

Hydrophobic volatile methyl siloxanes (VMS), such as hexamethyldisiloxane (L2) and octamethylcyclotetrasiloxane (D4), present a low solubility in water. An alternative treatment by absorption into hydrophobic absorbents was therefore studied. For this purpose, three different absorbents, motor oil, cutting oil and a water-cutting oil mixture, were selected with the aim of re-using a waste product. The set of experiments was carried out in a bubble column, where parameters such as inlet concentration, residence time and temperature were studied. The best performance for the removal of both siloxanes, in terms of absorption capacity, was observed for motor oil, particularly for D4. In fact, motor oil removal efficiency for D 4 was 80%, whereas for L2 it was 60%, indicating that D 4 is more easily absorbed than L2. In the case of water-cutting oil, this showed a mass transfer enhancement from the gas phase to the liquid phase compared with water alone. Furthermore, a removal efficiency of 70% was observed for D 4, showing that the addition of an oil fraction to a water system improves the absorption of VMS. These results show that VMS absorption into oils could be a promising way to achieve their abatement.

Effects of Virtual Manipulatives with Different Approaches on Students' Knowledge of Slope

ERIC Educational Resources Information Center

Demir, Mustafa

2018-01-01

Virtual Manipulatives (VMs) are computer-based, dynamic, and visual representations of mathematical concepts, provide interactive learning environments to advance mathematics instruction (Moyer et al., 2002). Despite their broad use, few research explored the integration of VMs into mathematics instruction (Moyer-Packenham & Westenskow, 2013).…

STS-135_VMS

NASA Image and Video Library

2011-03-02

JSC2011-E-040201 (2 March 2011) --- NASA astronaut Doug Hurley pilots a simulated landing at the Kennedy Space Center as the STS-135 crew trains in the Vertical Motion Simulator (VMS) at NASA's Ames Research Center in Mountain View, Calif. on March 2, 2011. Photo credit: NASA Photo/Houston Chronicle, Smiley N. Pool

STS-135_VMS

NASA Image and Video Library

2011-03-02

JSC2011-E-040199 (2 March 2011) --- NASA astronaut Rex Walheim, STS-135 mission specialist, exits the Vertical Motion Simulator (VMS) at NASA's Ames Research Center in Mountain View, Calif. after what is scheduled to be the crew's final training session in the simulator March 2, 2011. Photo credit: NASA Photo/Houston Chronicle, Smiley N. Pool

STS-135_VMS

NASA Image and Video Library

2011-03-02

JSC2011-E-040200 (2 March 2011) --- The landing approach to the Kennedy Space Center is seen in a heads up display as the STS-135 crew trains in the Vertical Motion Simulator (VMS) at NASA's Ames Research Center in Mountain View, Calif., on March 2, 2011. Photo credit: NASA Photo/Houston Chronicle, Smiley N. Pool

The fault-tree compiler

NASA Technical Reports Server (NTRS)

Martensen, Anna L.; Butler, Ricky W.

1987-01-01

The Fault Tree Compiler Program is a new reliability tool used to predict the top event probability for a fault tree. Five different gate types are allowed in the fault tree: AND, OR, EXCLUSIVE OR, INVERT, and M OF N gates. The high level input language is easy to understand and use when describing the system tree. In addition, the use of the hierarchical fault tree capability can simplify the tree description and decrease program execution time. The current solution technique provides an answer precise (within the limits of double precision floating point arithmetic) to the five digits in the answer. The user may vary one failure rate or failure probability over a range of values and plot the results for sensitivity analyses. The solution technique is implemented in FORTRAN; the remaining program code is implemented in Pascal. The program is written to run on a Digital Corporation VAX with the VMS operation system.

The Fault Tree Compiler (FTC): Program and mathematics

NASA Technical Reports Server (NTRS)

Butler, Ricky W.; Martensen, Anna L.

1989-01-01

The Fault Tree Compiler Program is a new reliability tool used to predict the top-event probability for a fault tree. Five different gate types are allowed in the fault tree: AND, OR, EXCLUSIVE OR, INVERT, AND m OF n gates. The high-level input language is easy to understand and use when describing the system tree. In addition, the use of the hierarchical fault tree capability can simplify the tree description and decrease program execution time. The current solution technique provides an answer precisely (within the limits of double precision floating point arithmetic) within a user specified number of digits accuracy. The user may vary one failure rate or failure probability over a range of values and plot the results for sensitivity analyses. The solution technique is implemented in FORTRAN; the remaining program code is implemented in Pascal. The program is written to run on a Digital Equipment Corporation (DEC) VAX computer with the VMS operation system.

Using vibrational molecular spectroscopy to reveal association of steam-flaking induced carbohydrates molecular structural changes with grain fractionation, biodigestion and biodegradation

NASA Astrophysics Data System (ADS)

Xu, Ningning; Liu, Jianxin; Yu, Peiqiang

2018-04-01

Advanced vibrational molecular spectroscopy has been developed as a rapid and non-destructive tool to reveal intrinsic molecular structure conformation of biological tissues. However, this technique has not been used to systematically study flaking induced structure changes at a molecular level. The objective of this study was to use vibrational molecular spectroscopy to reveal association between steam flaking induced CHO molecular structural changes in relation to grain CHO fractionation, predicted CHO biodegradation and biodigestion in ruminant system. The Attenuate Total Reflectance Fourier-transform Vibrational Molecular Spectroscopy (ATR-Ft/VMS) at SRP Key Lab of Molecular Structure and Molecular Nutrition, Ministry of Agriculture Strategic Research Chair Program (SRP, University of Saskatchewan) was applied in this study. The fractionation, predicted biodegradation and biodigestion were evaluated using the Cornell Net Carbohydrate Protein System. The results show that: (1) The steam flaking induced significant changes in CHO subfractions, CHO biodegradation and biodigestion in ruminant system. There were significant differences between non-processed (raw) and steam flaked grain corn (P < .01); (2) The ATR-Ft/VMS molecular technique was able to detect the processing induced CHO molecular structure changes; (3) Induced CHO molecular structure spectral features are significantly correlated (P < .05) to CHO subfractions, CHO biodegradation and biodigestion and could be applied to potentially predict CHO biodegradation (R2 = 0.87, RSD = 0.74, P < .01) and intestinal digestible undegraded CHO (R2 = 0.87, RSD = 0.24, P < .01). In summary, the processing induced molecular CHO structure changes in grain corn could be revealed by the ATR-Ft/VMS vibrational molecular spectroscopy. These molecular structure changes in grain were potentially associated with CHO biodegradation and biodigestion.

Rheology and tribology of lubricants with polymeric viscosity modifiers

NASA Astrophysics Data System (ADS)

Babak, LotfizadehDehkordi

Elastohydrodynamic lubrication (EHL) theory has been used to model the lubrication state of antifriction machine elements, where initial viscosity and pressure viscosity coefficients are essential parameters in film thickness modeling. Since the pressures of lubricants in the contact zone can be very high, it is important to know the rheological properties of lubricants in these pressure and temperature regimes. The characteristics of viscosity behavior as a function of pressure are also essential for a universal definition of the pressure viscosity coefficient in order to estimate film thickness in an EHL regime. In this study, viscosities and pressure-viscosity coefficients of ten commercial engine and gear oils and seventeen laboratory-produced oil/polymer viscosity modifiers (VM) additives are measured up to 1.3 GPa at 40, 75 and 100 °C. For the first time, a sharp increase in the viscosity and piezoviscous factor is observed in both mineral-based and synthetic-based oils with different VMs. Analysis of the experimental results indicates that sharp increase in viscosity observed in these experiments are believed to arise from physical changes in the VMs, that is liquid-solid phase transition. Evidence is offered that polymer properties such as molecular weight, concentration and structure influence the onset of the phase transitions. A modified Yasutomi model, which normally describes the pressure dependence of the viscosity of lubricants very well, fails to predict the viscosity of the specimens above the onset of sharp increase in viscosity. A design of experiment (DOE) analysis using Design-Expert software indicates that pressure and temperature are the most critical parameters in the viscosity variation. Tribological tests demonstrate that wear in the contact, zone occurs at temperatures and stresses that coincides with the VM phase transitions in both commercial and laboratory synthesized oil/VMs. Tribological results also indicate that the onset of the sharp increase in viscosity can have significant and unanticipated consequences on the elastohydrodynamic contact and can adversely affect EHL theory. The onset of the steep rise in viscosity may also affect the torque and power losses in a mechanical system. Hence, this previously unknown behavior of the lubricant with VMs should be seriously considered in the application of lubricant in mechanical system.

75 FR 13024 - Pacific Halibut Fisheries; Catch Sharing Plan

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-18

... system for guided charter vessels (75 FR 554) was also established January 5, 2010, for Areas 2C and 3A... resulting catch of which is sold or bartered; or is intended to be sold or bartered, other than (i) sport... fish processor; (t) ``VMS transmitter'' means a NMFS-approved vessel monitoring system transmitter that...

User's Manual for HPTAM: a Two-Dimensional Heat Pipe Transient Analysis Model, Including the Startup from a Frozen State

NASA Technical Reports Server (NTRS)

Tournier, Jean-Michel; El-Genk, Mohamed S.

1995-01-01

This report describes the user's manual for 'HPTAM,' a two-dimensional Heat Pipe Transient Analysis Model. HPTAM is described in detail in the UNM-ISNPS-3-1995 report which accompanies the present manual. The model offers a menu that lists a number of working fluids and wall and wick materials from which the user can choose. HPTAM is capable of simulating the startup of heat pipes from either a fully-thawed or frozen condition of the working fluid in the wick structure. The manual includes instructions for installing and running HPTAM on either a UNIX, MS-DOS or VMS operating system. Samples for input and output files are also provided to help the user with the code.

Effects of color scheme and message lines of variable message signs on driver performance.

PubMed

Lai, Chien-Jung

2010-07-01

The advancement in variable message signs (VMS) technology has made it possible to display message with various formats. This study presented an ergonomic study on the message design of Chinese variable message signs on urban roads in Taiwan. Effects of color scheme (one, two and three) and number of message lines (single, double and triple) of VMS on participants' response performance were investigated through a laboratory experiment. Results of analysis showed that color scheme and number of message lines are significant factors for participants' response time to VMS. Participants responded faster for two-color than for one- and three-color scheme. Participants also took less response time for double line message than for single and triple line message. Both color scheme and number of message lines had no significant effect on participants' response accuracy. The preference survey after the experiment showed that most participants preferred two-color scheme and double line message to the other combinations. The results can assist in adopting appropriate color scheme and number of message lines of Chinese VMS. Copyright 2009 Elsevier Ltd. All rights reserved.

Evaluating the effects of bilingual traffic signs on driver performance and safety.

PubMed

Jamson, S L; Tate, F N; Jamson, A H

2005-12-15

Variable message signs (VMS) can provide immediate and relevant information to road users and bilingual VMS can provide great flexibility in countries where a significant proportion of the population speak an alternative language to the majority. The study reported here evaluates the effect of various bilingual VMS configurations on driver behaviour and safety. The aim of the study was to determine whether or not the visual distraction associated with bilingual VMS signs of different configurations (length, complexity) impacted on driving performance. A driving simulator was used to allow full control over the scenarios, road environment and sign configuration and both longitudinal and lateral driver performance was assessed. Drivers were able to read one- and two-line monolingual signs and two-line bilingual signs without disruption to their driving behaviour. However, drivers significantly reduced their speed in order to read four-line monolingual and four-line bilingual signs, accompanied by an increase in headway to the vehicle in front. This implies that drivers are possibly reading the irrelevant text on the bilingual sign and various methods for reducing this effect are discussed.

In search of an everyday morality: the development of a measure.

PubMed

Shelton, C M; McAdams, D P

1990-01-01

Current interest in moral theorizing has been dominated by Kohlberg's cognitive-developmental view. Haan (1982) has challenged psychology's reliance on this rationalistic focus and has argued for a rethinking of morality's meaning in accord with everyday human experience. In light of this challenge, the present study gives both theoretical and empirical support to the advancement of a morality for everyday life. Specifically, a new measure called the Visions of Morality Scale (VMS) is reported. The VMS is sensitive to three dimensions which are necessary for an everyday morality: (1) a human constitutive component which is universally experienced by all human beings (empathy); (2) the inclusion of a behavioral component which reflects actual behavior (pro-social inclinations); and (3) a view of morality that is multilevel (private, interpersonal, and social). A brief sketch of the VMS is provided. Results are presented from a study of 181 high school students which relate the VMS to empathy and political orientation. Highly significant relationships were found among morality, political orientation, and empathy. In addition, results revealed numerous sex differences. Finally, the implications of an everyday morality are discussed.

Silvabase: A flexible data file management system

NASA Technical Reports Server (NTRS)

Lambing, Steven J.; Reynolds, Sandra J.

1991-01-01

The need for a more flexible and efficient data file management system for mission planning in the Mission Operations Laboratory (EO) at MSFC has spawned the development of Silvabase. Silvabase is a new data file structure based on a B+ tree data structure. This data organization allows for efficient forward and backward sequential reads, random searches, and appends to existing data. It also provides random insertions and deletions with reasonable efficiency, utilization of storage space well but not at the expense of speed, and performance of these functions on a large volume of data. Mission planners required that some data be keyed and manipulated in ways not found in a commercial product. Mission planning software is currently being converted to use Silvabase in the Spacelab and Space Station Mission Planning Systems. Silvabase runs on a Digital Equipment Corporation's popular VAX/VMS computers in VAX Fortran. Silvabase has unique features involving time histories and intervals such as in operations research. Because of its flexibility and unique capabilities, Silvabase could be used in almost any government or commercial application that requires efficient reads, searches, and appends in medium to large amounts of almost any kind of data.

[The vitamin status of pregnant women in Moscow: effect of multivitamin-mineral supplements].

PubMed

Beketova, N A; Sokolnikov, A A; Kodentsova, V M; Pereverzeva, O G; Vrzhesinskaya, O A; Kosheleva, O V; Gmoshinskaya, M V

2016-01-01

Examination of the vitamin status of 102 pregnant women (19-41 years old) from Moscow (gestational age 6-38 weeks) in winter and spring 2015 has been conducted. The lack of vitamin B2 (blood serum level of riboflavin <5 ng/ml), D (25(OH)D level <30 ng/ml) and β-carotene (<20 mg/dL) occurred in 49-66% of pregnant women. The percentage of persons with reduced serum levels of vitamin B6 (<4.8 mg/l), folic acid (<3 mg/l), vitamin A (<30 mg/dL), and E (<0.8 mg/dl) was insignificant and amounted 6-8%. All of the women had an adequate supply with vitamins C (>0.4 mg/dL) and B12 (>150 ng/L). The frequency of the combined deficiency of two vitamins was 29%, of three vitamins - 21%, four - 10%, five - 5%. Only 8% of women were sufficiently supplied with all 8 studied vitamins and β-carotene. A positive correlation (p<0.001) between the concentration of vitamin E and gestation term occurred. β-Carotene blood serum level raised with increasing gestation term in women receiving multivitamin-mineral supplements (VMS) and directly correlated (p<0.05) with vitamin E serum level. In 63 women who were not taking VMS, blood serum level of vitamins A, D, C, B2, B6, B12, folic acid and β-carotene was lower, and the frequency of inadequate supply, on the contrary, was significantly higher, compared to 39 women receiving VMS. Blood serum concentration of vitamins C, A, D, B6 and folic acid in women who were not taking VMS was significantly reduced (p<0.05) with increasing gestation term, whereas in women consuming VMS vitamin blood serum level was maintained at a constant level. The data obtained demonstrate advisability of VMS intake during pregnancy to maintain vitamin status of pregnant women at a satisfactory level and to reduce the risk of birth defects in infants.

CFCC: A Covert Flows Confinement Mechanism for Virtual Machine Coalitions

NASA Astrophysics Data System (ADS)

Cheng, Ge; Jin, Hai; Zou, Deqing; Shi, Lei; Ohoussou, Alex K.

Normally, virtualization technology is adopted to construct the infrastructure of cloud computing environment. Resources are managed and organized dynamically through virtual machine (VM) coalitions in accordance with the requirements of applications. Enforcing mandatory access control (MAC) on the VM coalitions will greatly improve the security of VM-based cloud computing. However, the existing MAC models lack the mechanism to confine the covert flows and are hard to eliminate the convert channels. In this paper, we propose a covert flows confinement mechanism for virtual machine coalitions (CFCC), which introduces dynamic conflicts of interest based on the activity history of VMs, each of which is attached with a label. The proposed mechanism can be used to confine the covert flows between VMs in different coalitions. We implement a prototype system, evaluate its performance, and show that our mechanism is practical.

Monitoring Volcanoes by Use of Air-Dropped Sensor Packages

NASA Technical Reports Server (NTRS)

Kedar, Sharon; Rivellini, Tommaso; Webb, Frank; Blaes, Brent; Bracho, Caroline; Lockhart, Andrew; McGee, Ken

2003-01-01

Sensor packages that would be dropped from airplanes have been proposed for pre-eruption monitoring of physical conditions on the flanks of awakening volcanoes. The purpose of such monitoring is to gather data that could contribute to understanding and prediction of the evolution of volcanic systems. Each sensor package, denoted a volcano monitoring system (VMS), would include a housing with a parachute attached at its upper end and a crushable foam impact absorber at its lower end (see figure). The housing would contain survivable low-power instrumentation that would include a Global Positioning System (GPS) receiver, an inclinometer, a seismometer, a barometer, a thermometer, and CO2 and SO2 analyzers. The housing would also contain battery power, control, data-logging, and telecommunication subsystems. The proposal for the development of the VMS calls for the use of commercially available sensor, power, and telecommunication equipment, so that efforts could be focused on integrating all of the equipment into a system that could survive impact and operate thereafter for 30 days, transmitting data on the pre-eruptive state of a target volcano to a monitoring center. In a typical scenario, VMSs would be dropped at strategically chosen locations on the flanks of a volcano once the volcano had been identified as posing a hazard from any of a variety of observations that could include eyewitness reports, scientific observations from positions on the ground, synthetic-aperture-radar scans from aircraft, and/or remote sensing from aboard spacecraft. Once dropped, the VMSs would be operated as a network of in situ sensors that would transmit data to a local monitoring center. This network would provide observations as part of an integrated volcano-hazard assessment strategy that would involve both remote sensing and timely observations from the in situ sensors. A similar strategy that involves the use of portable sensors (but not dropping of sensors from aircraft) is already in use in the Volcano Disaster Assistance Program (VDAP), which was developed by the U.S. Geological Survey and the U.S. Office of Foreign Disaster Assistance to respond to volcanic crises around the world. The VMSs would add a greatly needed capability that would enable VDAP response teams to deploy their volcano-monitoring equipment in a more timely manner with less risk to personnel in the field.

Geochemical and Sulfur-Isotopic Signatures of Volcanogenic Massive Sulfide Deposits on Prince of Wales Island and Vicinity, Southeastern Alaska

USGS Publications Warehouse

Slack, John F.; Shanks, Wayne C.; Karl, Susan M.; Gemery, Pamela A.; Bittenbender, Peter E.; Ridley, W. Ian

2007-01-01

Stratabound volcanogenic massive sulfide (VMS) deposits on Prince of Wales Island and vicinity, southeastern Alaska, occur in two volcanosedimentary sequences of Late Proterozoic through Cambrian and of Ordovician through Early Silurian age. This study presents geochemical data on sulfide-rich samples, in situ laser-ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) of sulfide minerals, and sulfur-isotopic analyses of sulfides and sulfates (barite) for identifying and distinguishing between primary sea-floor signatures and later regional metamorphic overprints. These datasets are also used here in an attempt to discriminate the VMS deposits in the older Wales Group from those in the younger Moira Sound unit (new informal name). The Wales Group and its contained VMS deposits have been multiply deformed and metamorphosed from greenschist to amphibolite grade, whereas the Moira Sound unit and related VMS deposits are less deformed and generally less metamorphosed (lower to middle greenschist grade). Variations in the sulfide mineral assemblages and textures of the VMS deposits in both sequences reflect a combination of processes, including primary sea-floor mineralization and sub-sea-floor zone refining, followed by metamorphic recrystallization. Very coarse grained (>1 cm diam) sulfide minerals and abundant pyrrhotite are restricted to VMS deposits in a small area of the Wales Group, at Khayyam and Stumble-On, which record high-grade metamorphism of the sulfides. Geochemical and sulfur-isotopic data distinguish the VMS deposits in the Wales Group from those in the Moira Sound unit. Although base- and precious-metal contents vary widely in sulfide-rich samples from both sequences, samples from the Moira Sound generally have proportionately higher Ag contents relative to base metals and Au. In situ LA-ICP-MS analysis of trace elements in the sulfide minerals suggests that primary sea-floor hydrothermal signatures are preserved in some samples (for example, Mn, As, Sb, and Tl in pyrite from the Moira Sound unit), whereas in other samples the signatures are varyingly annealed, owing to metamorphic overprinting. A limited LA-ICP-MS database for sphalerite indicates that low-Fe sphalerite is preferentially associated with the most Au rich deposits, the Niblack and Nutkwa. Sulfur-isotopic values for sulfide minerals in the VMS deposits in the Wales Group range from 5.9 to 17.4 permil (avg 11.5?2.7 permil), about 5 to 6 permil higher than those in the Moira Sound unit, which range from -2.8 to 10.4 permil (avg 6.1?4.0 permil). This difference in 34Ssulfide values reflects a dominantly seawater sulfate source of the sulfides and is linked to the 34S values of contemporaneous seawater sulfate, which were slightly higher during the Late Proterozoic through Cambrian than during the Ordovician through Early Silurian.

76 FR 2011 - High Seas Driftnet Fishing Moratorium Protection Act; Identification and Certification Procedures...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-12

... unauthorized or other IUU catch; Catch and effort monitoring, including licensing and permitting schemes, reporting, and vessel monitoring systems (VMS); Bycatch reduction and mitigation strategies and techniques... effective sanctions and monitoring, control and surveillance (MCS) capacity; and Participation in voluntary...

Making Mosaics Of SAR Imagery

NASA Technical Reports Server (NTRS)

Curlander, John C.; Kwok, Ronald; Pang, Shirley S.; Pang, Amy A.

1990-01-01

Spaceborne synthetic-aperture-radar (SAR) images useful for mapping of planets and investigations in Earth sciences. Produces multiframe mosaic by combining images along ground track, in adjacent cross-track swaths, or in ascending and descending passes. Images registered with geocoded maps such as ones produced by MAPJTC (NPO-17718), required as input. Minimal intervention by operator required. MOSK implemented on DEC VAX 11/785 computer running VMS 4.5. Most subroutines in FORTRAN, but three in MAXL and one in APAL.

50 CFR 300.117 - Prohibitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

.... (9) Fail to use real-time C-VMS port-to-port on board U.S. vessels harvesting AMLR in the Convention... documentation of the use of real-time C-VMS port-to-port by the vessel that harvested such Dissostichus species... board the vessel at all times as specified in this subpart. (4) Tamper with, damage, destroy, alter, or...

50 CFR 300.117 - Prohibitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

.... (9) Fail to use real-time C-VMS port-to-port on board U.S. vessels harvesting AMLR in the Convention... documentation of the use of real-time C-VMS port-to-port by the vessel that harvested such Dissostichus species... board the vessel at all times as specified in this subpart. (4) Tamper with, damage, destroy, alter, or...

Virtual Microscopic Simulation (VMS) to Promote Students' Conceptual Change: A Case Study of Heat Transfer

ERIC Educational Resources Information Center

Wibowo, Firmanul Catur; Suhandi, Andi; Nahadi; Samsudin, Achmad; Darman, Dina Rahmi; Suherli, Zulmiswal; Hasani, Aceng; Leksono, Sroso Mukti; Hendrayana, Aan; Suherman; Hidayat, Soleh; Hamdani, Dede; Costu, Bayram

2017-01-01

Most students cannot understand the concepts of science concepts. The abstract concepts that require visualization help students to promote to the understanding about the concept. The aim of this study was to develop Virtual Microscopic Simulation (VMS) in terms of encouraging conceptual change and to promote its effectiveness connected to…

STS-135_VMS

NASA Image and Video Library

2011-03-02

JSC2011-E-040193 (2 March 2011) --- NASA astronaut Chris Ferguson (left), STS-135 commander, confers with astronaut Rex Walheim, mission specialist, as the Atlantis crew participates in a briefing before a training session in the Vertical Motion Simulator (VMS) at NASA's Ames Research Center in Mountain View, Calif. March 2, 2011. Photo credit: NASA Photo/Houston Chronicle, Smiley N. Pool

STS-135_VMS

NASA Image and Video Library

2011-03-02

JSC2011-E-040204 (2 March 2011) --- NASA astronaut Chris Ferguson, STS-135 commander, prepares for departure from Moffett Field in a T-38 trainer home to Houston after the crew of STS-135 trained in the Vertical Motion Simulator (VMS) at NASA's Ames Research Center in Mountain View, Calif. on March 2, 2011, Photo credit: NASA Photo/Houston Chronicle, Smiley N. Pool

SARA - SURE/ASSIST RELIABILITY ANALYSIS WORKSTATION (VAX VMS VERSION)

NASA Technical Reports Server (NTRS)

Butler, R. W.

1994-01-01

SARA, the SURE/ASSIST Reliability Analysis Workstation, is a bundle of programs used to solve reliability problems. The mathematical approach chosen to solve a reliability problem may vary with the size and nature of the problem. The Systems Validation Methods group at NASA Langley Research Center has created a set of four software packages that form the basis for a reliability analysis workstation, including three for use in analyzing reconfigurable, fault-tolerant systems and one for analyzing non-reconfigurable systems. The SARA bundle includes the three for reconfigurable, fault-tolerant systems: SURE reliability analysis program (COSMIC program LAR-13789, LAR-14921); the ASSIST specification interface program (LAR-14193, LAR-14923), and PAWS/STEM reliability analysis programs (LAR-14165, LAR-14920). As indicated by the program numbers in parentheses, each of these three packages is also available separately in two machine versions. The fourth package, which is only available separately, is FTC, the Fault Tree Compiler (LAR-14586, LAR-14922). FTC is used to calculate the top-event probability for a fault tree which describes a non-reconfigurable system. PAWS/STEM and SURE are analysis programs which utilize different solution methods, but have a common input language, the SURE language. ASSIST is a preprocessor that generates SURE language from a more abstract definition. ASSIST, SURE, and PAWS/STEM are described briefly in the following paragraphs. For additional details about the individual packages, including pricing, please refer to their respective abstracts. ASSIST, the Abstract Semi-Markov Specification Interface to the SURE Tool program, allows a reliability engineer to describe the failure behavior of a fault-tolerant computer system in an abstract, high-level language. The ASSIST program then automatically generates a corresponding semi-Markov model. A one-page ASSIST-language description may result in a semi-Markov model with thousands of states and transitions. The ASSIST program also includes model-reduction techniques to facilitate efficient modeling of large systems. The semi-Markov model generated by ASSIST is in the format needed for input to SURE and PAWS/STEM. The Semi-Markov Unreliability Range Evaluator, SURE, is an analysis tool for reconfigurable, fault-tolerant systems. SURE provides an efficient means for calculating accurate upper and lower bounds for the death state probabilities for a large class of semi-Markov models, not just those which can be reduced to critical-pair architectures. The calculated bounds are close enough (usually within 5 percent of each other) for use in reliability studies of ultra-reliable computer systems. The SURE bounding theorems have algebraic solutions and are consequently computationally efficient even for large and complex systems. SURE can optionally regard a specified parameter as a variable over a range of values, enabling an automatic sensitivity analysis. SURE output is tabular. The PAWS/STEM package includes two programs for the creation and evaluation of pure Markov models describing the behavior of fault-tolerant reconfigurable computer systems: the Pade Approximation with Scaling (PAWS) and Scaled Taylor Exponential Matrix (STEM) programs. PAWS and STEM produce exact solutions for the probability of system failure and provide a conservative estimate of the number of significant digits in the solution. Markov models of fault-tolerant architectures inevitably lead to numerically stiff differential equations. Both PAWS and STEM have the capability to solve numerically stiff models. These complementary programs use separate methods to determine the matrix exponential in the solution of the model's system of differential equations. In general, PAWS is better suited to evaluate small and dense models. STEM operates at lower precision, but works faster than PAWS for larger models. The programs that comprise the SARA package were originally developed for use on DEC VAX series computers running VMS and were later ported for use on Sun series computers running SunOS. They are written in C-language, Pascal, and FORTRAN 77. An ANSI compliant C compiler is required in order to compile the C portion of the Sun version source code. The Pascal and FORTRAN code can be compiled on Sun computers using Sun Pascal and Sun Fortran. For the VMS version, VAX C, VAX PASCAL, and VAX FORTRAN can be used to recompile the source code. The standard distribution medium for the VMS version of SARA (COS-10041) is a 9-track 1600 BPI magnetic tape in VMSINSTAL format. It is also available on a TK50 tape cartridge in VMSINSTAL format. Executables are included. The standard distribution medium for the Sun version of SARA (COS-10039) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. Both Sun3 and Sun4 executables are included. Electronic copies of the ASSIST user's manual in TeX and PostScript formats are provided on the distribution medium. DEC, VAX, VMS, and TK50 are registered trademarks of Digital Equipment Corporation. Sun, Sun3, Sun4, and SunOS are trademarks of Sun Microsystems, Inc. TeX is a trademark of the American Mathematical Society. PostScript is a registered trademark of Adobe Systems Incorporated.

76 FR 42663 - Magnuson-Stevens Fishery Conservation and Management Act Provisions; Fisheries of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-19

... through daily Vessel Monitoring System (VMS) catch reports, as is currently proposed through a regulatory..., transfer, receive, sell, purchase, trade, or barter; or attempt to transfer, receive, sell, purchase, trade, or barter, or sell more than 2,000 lb (907 kg) of Atlantic [[Page 42670

50 CFR Appendix B to Part 404 - Approved VMS

Code of Federal Regulations, 2014 CFR

2014-10-01

... Inmarsat-C system use contract with an approved Inmarsat-C communications service provider. The owner will be required to complete the Inmarsat-C “Registration for Service Activation for Maritime Mobile Earth... documentation or registration number; and (9) mobile earth station license (FCC license). The OLE will provide...

50 CFR 300.45 - Vessel Monitoring System.

Code of Federal Regulations, 2013 CFR

2013-10-01

... installers may be obtained from the Regional Administrator or the Administrator. (d) Hardware and software specifications. The VMS unit installed and carried on board a vessel to comply with the requirements of this section must consist of hardware and software that is approved by the Administrator and approved by NMFS...

50 CFR 300.45 - Vessel Monitoring System.

Code of Federal Regulations, 2012 CFR

2012-10-01

... installers may be obtained from the Regional Administrator or the Administrator. (d) Hardware and software specifications. The VMS unit installed and carried on board a vessel to comply with the requirements of this section must consist of hardware and software that is approved by the Administrator and approved by NMFS...

50 CFR 300.45 - Vessel Monitoring System.

Code of Federal Regulations, 2014 CFR

2014-10-01

... installers may be obtained from the Regional Administrator or the Administrator. (d) Hardware and software specifications. The VMS unit installed and carried on board a vessel to comply with the requirements of this section must consist of hardware and software that is approved by the Administrator and approved by NMFS...

Trophic dilution of cyclic volatile methylsiloxanes (cVMS) in the pelagic marine food web of Tokyo Bay, Japan.

PubMed

Powell, David E; Suganuma, Noriyuki; Kobayashi, Keiji; Nakamura, Tsutomu; Ninomiya, Kouzo; Matsumura, Kozaburo; Omura, Naoki; Ushioka, Satoshi

2017-02-01

Bioaccumulation and trophic transfer of cyclic volatile methylsiloxanes (cVMS), specifically octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5), and dodecamethylcyclohexasiloxane (D6), were evaluated in the pelagic marine food web of Tokyo Bay, Japan. Polychlorinated biphenyl (PCB) congeners that are "legacy" chemicals known to bioaccumulate in aquatic organisms and biomagnify across aquatic food webs were used as a benchmark chemical (CB-180) to calibrate the sampled food web and as a reference chemical (CB-153) to validate the results. Trophic magnification factors (TMFs) were calculated from slopes of ordinary least-squares (OLS) regression models and slopes of bootstrap regression models, which were used as robust alternatives to the OLS models. Various regression models were developed that incorporated benchmarking to control bias associated with experimental design, food web dynamics, and trophic level structure. There was no evidence from any of the regression models to suggest biomagnification of cVMS in Tokyo Bay. Rather, the regression models indicated that trophic dilution of cVMS, not trophic magnification, occurred across the sampled food web. Comparison of results for Tokyo Bay to results from other studies indicated that bioaccumulation of cVMS was not related to type of food web (pelagic vs demersal), environment (marine vs freshwater), species composition, or location. Rather, results suggested that differences between study areas was likely related to food web dynamics and variable conditions of exposure resulting from non-uniform patterns of organism movement across spatial concentration gradients. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Validity, cut-points, and minimally important differences for two hot flash-related daily interference scales.

PubMed

Carpenter, Janet S; Bakoyannis, Giorgos; Otte, Julie L; Chen, Chen X; Rand, Kevin L; Woods, Nancy; Newton, Katherine; Joffe, Hadine; Manson, JoAnn E; Freeman, Ellen W; Guthrie, Katherine A

2017-08-01

To conduct psychometric analyses to condense the Hot Flash-Related Daily Interference Scale (HFRDIS) into a shorter form termed the Hot Flash Interference (HFI) scale; evaluate cut-points for both scales; and establish minimally important differences (MIDs) for both scales. We analyzed baseline and postrandomization patient-reported data pooled across three randomized trials aimed at reducing vasomotor symptoms (VMS) in 899 midlife women. Trials were conducted across five MsFLASH clinical sites between July 2009 and October 2012. We eliminated HFRDIS items based on experts' content validity ratings and confirmatory factor analysis, and evaluated cut-points and established MIDs by mapping HFRDIS and HFI to other measures. The three-item HFI (interference with sleep, mood, and concentration) demonstrated strong internal consistency (alphas of 0.830 and 0.856), showed good fit to the unidimensional "hot flash interference factor," and strong convergent validity with HFRDIS scores, diary VMS, and menopausal quality of life. For both scales, cut-points of mild (0-3.9), moderate (4-6.9), and severe (7-10) interference were associated with increasing diary VMS ratings, sleep, and anxiety. The average MID was 1.66 for the HFRDIS and 2.34 for the HFI. The HFI is a brief assessment of VMS interference and will be useful in busy clinics to standardize VMS assessment or in research studies where response burden may be an issue. The scale cut-points and MIDs should prove useful in targeting those most in need of treatment, monitoring treatment response, and interpreting existing and future research findings.

75 FR 102 - Proposed Information Collection; Comment Request; Framework Adjustment 4 to the Monkfish Fishery...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-04

... their days-at-sea (DAS) declaration through their VMS from a Northeast (NE) multispecies Category A DAS to a monkfish DAS while at sea, i.e., before crossing the VMS demarcation line upon the vessel's... DAS in the NFMA enables NMFS to monitor the overall fishing effort, in the form of monkfish DAS usage...

Relationships between menopausal and mood symptoms and EEG sleep measures in a multi-ethnic sample of middle-aged women: the SWAN sleep study.

PubMed

Kravitz, Howard M; Avery, Elizabeth; Sowers, Maryfran; Bromberger, Joyce T; Owens, Jane F; Matthews, Karen A; Hall, Martica; Zheng, Huiyong; Gold, Ellen B; Buysse, Daniel J

2011-09-01

Examine associations of vasomotor and mood symptoms with visually scored and computer-generated measures of EEG sleep. Cross-sectional analysis. Community-based in-home polysomnography (PSG). 343 African American, Caucasian, and Chinese women; ages 48-58 years; pre-, peri- or post-menopausal; participating in the Study of Women's Health Across the Nation Sleep Study (SWAN Sleep Study). None. Measures included PSG-assessed sleep duration, continuity, and architecture, delta sleep ratio (DSR) computed from automated counts of delta wave activity, daily diary-assessed vasomotor symptoms (VMS), questionnaires to collect mood (depression, anxiety) symptoms, medication, and lifestyle information, and menopausal status using bleeding criteria. Sleep outcomes were modeled using linear regression. Nocturnal VMS were associated with longer sleep time. Higher anxiety symptom scores were associated with longer sleep latency and lower sleep efficiency, but only in women reporting nocturnal VMS. Contrary to expectations, VMS and mood symptoms were unrelated to either DSR or REM latency. Vasomotor symptoms moderated associations of anxiety with EEG sleep measures of sleep latency and sleep efficiency and was associated with longer sleep duration in this multi-ethnic sample of midlife women.

Transport and degradation of perchlorate in deep vadose zone: implications from direct observations during bioremediation treatment

NASA Astrophysics Data System (ADS)

Dahan, Ofer; Katz, Idan; Avishai, Lior; Ronen, Zeev

2017-08-01

An in situ bioremediation experiment of a deep vadose zone ( ˜ 40 m) contaminated with a high concentration of perchlorate (> 25 000 mg L-1) was conducted through a full-scale field operation. Favourable environmental conditions for microbiological reduction of perchlorate were sought by infiltrating an electron donor-enriched water solution using drip irrigation underlying an airtight sealing liner. A vadose zone monitoring system (VMS) was used for real-time tracking of the percolation process, the penetration depth of dissolved organic carbon (DOC), and the variation in perchlorate concentration across the entire soil depth. The experimental conditions for each infiltration event were adjusted according to insight gained from data obtained by the VMS in previous stages. Continuous monitoring of the vadose zone indicated that in the top 13 m of the cross section, perchlorate concentration is dramatically reduced from thousands of milligrams per litre to near-detection limits with a concurrent increase in chloride concentration. Nevertheless, in the deeper parts of the vadose zone (< 17 m), perchlorate concentration increased, suggesting its mobilization down through the cross section. Breakthrough of DOC and bromide at different depths across the unsaturated zone showed limited migration capacity of biologically consumable carbon and energy sources due to their enhanced biodegradation in the upper soil layers. Nevertheless, the increased DOC concentration with concurrent reduction in perchlorate and increase in the chloride-to-perchlorate ratio in the top 13 m indicate partial degradation of perchlorate in this zone. There was no evidence of improved degradation conditions in the deeper parts where the initial concentrations of perchlorate were significantly higher.

The production deployment of IPv6 on WLCG

NASA Astrophysics Data System (ADS)

Bernier, J.; Campana, S.; Chadwick, K.; Chudoba, J.; Dewhurst, A.; Eliáš, M.; Fayer, S.; Finnern, T.; Grigoras, C.; Hartmann, T.; Hoeft, B.; Idiculla, T.; Kelsey, D. P.; López Muñoz, F.; Macmahon, E.; Martelli, E.; Millar, A. P.; Nandakumar, R.; Ohrenberg, K.; Prelz, F.; Rand, D.; Sciabà, A.; Tigerstedt, U.; Voicu, R.; Walker, C. J.; Wildish, T.

2015-12-01

The world is rapidly running out of IPv4 addresses; the number of IPv6 end systems connected to the internet is increasing; WLCG and the LHC experiments may soon have access to worker nodes and/or virtual machines (VMs) possessing only an IPv6 routable address. The HEPiX IPv6 Working Group has been investigating, testing and planning for dual-stack services on WLCG for several years. Following feedback from our working group, many of the storage technologies in use on WLCG have recently been made IPv6-capable. This paper presents the IPv6 requirements, tests and plans of the LHC experiments together with the tests performed on the group's IPv6 test-bed. This is primarily aimed at IPv6-only worker nodes or VMs accessing several different implementations of a global dual-stack federated storage service. Finally the plans for deployment of production dual-stack WLCG services are presented.

Food Environment in Secondary Schools: À La Carte, Vending Machines, and Food Policies and Practices

PubMed Central

French, Simone A.; Story, Mary; Fulkerson, Jayne A.; Gerlach, Anne Faricy

2003-01-01

Objectives. This study described the food environment in 20 Minnesota secondary schools. Methods. Data were collected on school food policies and the availability and nutritional content of foods in school à la carte (ALC) areas and vending machines (VMs). Results. Approximately 36% and 35% of foods in ALC areas and in VMs, respectively, met the lower-fat criterion (≤ 5.5 fat grams/serving). The chips/crackers category constituted the largest share of ALC foods (11.5%). The median number of VMs per school was 12 (4 soft drink, 2 snack, 5 other). Few school food policies were reported. Conclusions. The availability of healthful foods and beverages in schools as well as school food policies that foster healthful food choices among students needs greater attention. PMID:12835203

Obscuration Code with Space Station Applications (Manual)

DTIC Science & Technology

1985-12-01

used to perform this DCL style com - mand parsing, readers are referred to the VMS documentation concerning the Command Definition Utility or CDU. I I I...FOR0O7.DAT; Input echo file: USERI: [RJM.NASJAN5S1 .LIS;3 The above examples show the operation of the SET OUTPUT com - mand. Note that the printer file is...be opened using the SET OUTPUT com - mand. The output files can be opened and closed using the SET OUTPUT /ECHOING, /PRINTABLE, /PLOTTABLE commands

50 CFR 648.10 - VMS and DAS requirements for vessel owners/operators.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE FISHERIES OF THE NORTHEASTERN... Little River Light 44°39.0′ 67°10.5′ 4. Whistle Buoy “8BI” (SSE of Baker Island) 44°13.6′ 68°10.8′ 5... Neddick Light 43°09.9′ 70°34.5′ 10. Merrimack River Entrance “MR” Whistle Buoy 42°48.6′ 70°47.1′ 11...

Computer-Aided System Engineering and Analysis (CASE/A) Programmer's Manual, Version 5.0

NASA Technical Reports Server (NTRS)

Knox, J. C.

1996-01-01

The Computer Aided System Engineering and Analysis (CASE/A) Version 5.0 Programmer's Manual provides the programmer and user with information regarding the internal structure of the CASE/A 5.0 software system. CASE/A 5.0 is a trade study tool that provides modeling/simulation capabilities for analyzing environmental control and life support systems and active thermal control systems. CASE/A has been successfully used in studies such as the evaluation of carbon dioxide removal in the space station. CASE/A modeling provides a graphical and command-driven interface for the user. This interface allows the user to construct a model by placing equipment components in a graphical layout of the system hardware, then connect the components via flow streams and define their operating parameters. Once the equipment is placed, the simulation time and other control parameters can be set to run the simulation based on the model constructed. After completion of the simulation, graphical plots or text files can be obtained for evaluation of the simulation results over time. Additionally, users have the capability to control the simulation and extract information at various times in the simulation (e.g., control equipment operating parameters over the simulation time or extract plot data) by using "User Operations (OPS) Code." This OPS code is written in FORTRAN with a canned set of utility subroutines for performing common tasks. CASE/A version 5.0 software runs under the VAX VMS(Trademark) environment. It utilizes the Tektronics 4014(Trademark) graphics display system and the VTIOO(Trademark) text manipulation/display system.

The JCMT Observatory Control System

NASA Astrophysics Data System (ADS)

Rees, Nick; Economou, Frossie; Jenness, Tim; Kackley, Russell; Walther, Craig; Dent, Bill; Folger, Martin; Gao, Xiaofeng; Kelly, Dennis; Lightfoot, John; Pain, Ian; Hovey, Gary; Willis, Tony; Redman, Russell

The JCMT, the world's largest sub-mm telescope, has had essentially the same VAX/VMS based control system since it was commissioned. For the next generation of instrumentation we are implementing a new Unix/VxWorks based system, based on the successful ORAC system that was recently released on UKIRT. This paper gives a broad overview of the system architecture and includes some discussion on the choices made. The pros and cons of using XML as an inherent part of the system architecture are also discussed.

BESIII physical offline data analysis on virtualization platform

NASA Astrophysics Data System (ADS)

Huang, Q.; Li, H.; Kan, B.; Shi, J.; Lei, X.

2015-12-01

In this contribution, we present an ongoing work, which aims at benefiting BESIII computing system for higher resource utilization and more efficient job operations brought by cloud and virtualization technology with Openstack and KVM. We begin with the architecture of BESIII offline software to understand how it works. We mainly report the KVM performance evaluation and optimization from various factors in hardware and kernel. Experimental results show the CPU performance penalty of KVM can be approximately decreased to 3%. In addition, the performance comparison between KVM and physical machines in aspect of CPU, disk IO and network IO is also presented. Finally, we present our development work, an adaptive cloud scheduler, which allocates and reclaims VMs dynamically according to the status of TORQUE queue and the size of resource pool to improve resource utilization and job processing efficiency.

The ionic bases of the action potential in isolated mouse cardiac Purkinje cell.

PubMed

Vaidyanathan, Ravi; O'Connell, Ryan P; Deo, Makarand; Milstein, Michelle L; Furspan, Philip; Herron, Todd J; Pandit, Sandeep V; Musa, Hassan; Berenfeld, Omer; Jalife, José; Anumonwo, Justus M B

2013-01-01

Collecting electrophysiological and molecular data from the murine conduction system presents technical challenges. Thus, only little advantage has been taken of numerous genetically engineered murine models to study excitation through the cardiac conduction system of the mouse. To develop an approach for isolating murine cardiac Purkinje cells (PCs), to characterize major ionic currents and to use the data to simulate action potentials (APs) recorded from PCs. Light microscopy was used to isolate and identify PCs from apical and septal cells. Current and voltage clamp techniques were used to record APs and whole cell currents. We then simulated a PC AP on the basis of our experimental data. APs recorded from PCs were significantly longer than those recorded from ventricular cells. The prominent plateau phase of the PC AP was very negative (≈-40 mV). Spontaneous activity was observed only in PCs. The inward rectifier current demonstrated no significant differences compared to ventricular myocytes (VMs). However, sodium current density was larger, and the voltage-gated potassium current density was significantly less in PCs compared with myocytes. T-type Ca(2+) currents (I(Ca,T)) were present in PCs but not VMs. Computer simulations suggest that I(Ca,T) and cytosolic calcium diffusion significantly modulate AP profile recorded in PCs, as compared to VMs. Our study provides the first comprehensive ionic profile of murine PCs. The data show unique features of PC ionic mechanisms that govern its excitation process. Experimental data and numerical modeling results suggest that a smaller voltage-gated potassium current and the presence of I(Ca,T) are important determinants of the longer and relatively negative plateau phase of the APs. Copyright © 2013 Heart Rhythm Society. Published by Elsevier Inc. All rights reserved.

Optimized Hypervisor Scheduler for Parallel Discrete Event Simulations on Virtual Machine Platforms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoginath, Srikanth B; Perumalla, Kalyan S

2013-01-01

With the advent of virtual machine (VM)-based platforms for parallel computing, it is now possible to execute parallel discrete event simulations (PDES) over multiple virtual machines, in contrast to executing in native mode directly over hardware as is traditionally done over the past decades. While mature VM-based parallel systems now offer new, compelling benefits such as serviceability, dynamic reconfigurability and overall cost effectiveness, the runtime performance of parallel applications can be significantly affected. In particular, most VM-based platforms are optimized for general workloads, but PDES execution exhibits unique dynamics significantly different from other workloads. Here we first present results frommore » experiments that highlight the gross deterioration of the runtime performance of VM-based PDES simulations when executed using traditional VM schedulers, quantitatively showing the bad scaling properties of the scheduler as the number of VMs is increased. The mismatch is fundamental in nature in the sense that any fairness-based VM scheduler implementation would exhibit this mismatch with PDES runs. We also present a new scheduler optimized specifically for PDES applications, and describe its design and implementation. Experimental results obtained from running PDES benchmarks (PHOLD and vehicular traffic simulations) over VMs show over an order of magnitude improvement in the run time of the PDES-optimized scheduler relative to the regular VM scheduler, with over 20 reduction in run time of simulations using up to 64 VMs. The observations and results are timely in the context of emerging systems such as cloud platforms and VM-based high performance computing installations, highlighting to the community the need for PDES-specific support, and the feasibility of significantly reducing the runtime overhead for scalable PDES on VM platforms.« less

DDDAS-based Resilient Cyberspace (DRCS)

DTIC Science & Technology

2016-08-03

Resilient Middleware ( CRM ), Supervisor VMs (SVMs), and Master VMs (MVMs). In what follows, we briefly highlight the main functions to be provided by each...phases. 4.5.1.2 Cloud Resilient Middleware ( CRM ) The CRM provides the control and management services to deploy and configure the software and...To speedup the process of selecting the appropriate resilient algorithms and execution environments, the CRM repository contains a set of SBE

Comparative study on histological structures of the vitelline membrane of hen and duck egg observed by cryo-scanning electron microscopy.

PubMed

Chung, Wen-Hsin; Lai, Kung-Ming; Hsu, Kuo-chiang

2010-02-10

The histological structures of the vitelline membranes (VM) of hen and duck eggs were observed by cryo-scanning electron microscopy (cryo-SEM), and the chemical characteristics were also compared. The outer layer surface (OLS) of duck egg VM showed networks constructed by fibrils and sheets (0.1-5.2 microm in width), and that of hen egg presented networks formed only by sheets (2-6 microm in width). Thicker fibrils (0.5-1.5 microm in width) with different arrangement were observed on the inner layer surface (ILS) of duck egg VM as compared to those (0.3-0.7 microm in width) of hen egg VM. Upon separation, the outer surface of the outer layer (OSOL) and the inner surface of the inner layer (ISIL) of hen and duck egg VMs were quite similar to fresh VM except that the OSOL of duck egg VM showed networks constructed only by sheets. Thin fibrils interlaced above a bumpy or flat structure were observed at the exposed surface of the outer layer (ESOL) of hen and duck egg VMs. The exposed surfaces of inner layers (ESIL) of hen and duck egg VMs showed similar structures of fibrils, which joined, branched, and ran in straight lines for long distances up to 30 microm; however, the widths of the fibrils shown in ESOL and ESIL of duck egg VM were 0.1 and 0.7-1.4 microm, respectively, and were greater than those (<0.1 and 0.5-0.8 microm) of hen egg VM. The continuous membranes of both hen and duck egg VMs were still attached to the outer layers when separated. The content of protein, the major component of VM, was higher in duck egg VM (88.6%) than in hen egg VM (81.6%). Four and six major SDS-soluble protein patterns with distinct localization were observed in hen and duck egg VMs, respectively. Overall, the different histological structures of hen and duck egg VMs were suggested to be majorly attributable to the diverse protein components.

Performance of fully-coupled algebraic multigrid preconditioners for large-scale VMS resistive MHD

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, P. T.; Shadid, J. N.; Hu, J. J.

Here, we explore the current performance and scaling of a fully-implicit stabilized unstructured finite element (FE) variational multiscale (VMS) capability for large-scale simulations of 3D incompressible resistive magnetohydrodynamics (MHD). The large-scale linear systems that are generated by a Newton nonlinear solver approach are iteratively solved by preconditioned Krylov subspace methods. The efficiency of this approach is critically dependent on the scalability and performance of the algebraic multigrid preconditioner. Our study considers the performance of the numerical methods as recently implemented in the second-generation Trilinos implementation that is 64-bit compliant and is not limited by the 32-bit global identifiers of themore » original Epetra-based Trilinos. The study presents representative results for a Poisson problem on 1.6 million cores of an IBM Blue Gene/Q platform to demonstrate very large-scale parallel execution. Additionally, results for a more challenging steady-state MHD generator and a transient solution of a benchmark MHD turbulence calculation for the full resistive MHD system are also presented. These results are obtained on up to 131,000 cores of a Cray XC40 and one million cores of a BG/Q system.« less

Performance of fully-coupled algebraic multigrid preconditioners for large-scale VMS resistive MHD

DOE PAGES

Lin, P. T.; Shadid, J. N.; Hu, J. J.; ...

2017-11-06

Here, we explore the current performance and scaling of a fully-implicit stabilized unstructured finite element (FE) variational multiscale (VMS) capability for large-scale simulations of 3D incompressible resistive magnetohydrodynamics (MHD). The large-scale linear systems that are generated by a Newton nonlinear solver approach are iteratively solved by preconditioned Krylov subspace methods. The efficiency of this approach is critically dependent on the scalability and performance of the algebraic multigrid preconditioner. Our study considers the performance of the numerical methods as recently implemented in the second-generation Trilinos implementation that is 64-bit compliant and is not limited by the 32-bit global identifiers of themore » original Epetra-based Trilinos. The study presents representative results for a Poisson problem on 1.6 million cores of an IBM Blue Gene/Q platform to demonstrate very large-scale parallel execution. Additionally, results for a more challenging steady-state MHD generator and a transient solution of a benchmark MHD turbulence calculation for the full resistive MHD system are also presented. These results are obtained on up to 131,000 cores of a Cray XC40 and one million cores of a BG/Q system.« less

ASSIST - THE ABSTRACT SEMI-MARKOV SPECIFICATION INTERFACE TO THE SURE TOOL PROGRAM (VAX VMS VERSION)

NASA Technical Reports Server (NTRS)

Johnson, S. C.

1994-01-01

ASSIST, the Abstract Semi-Markov Specification Interface to the SURE Tool program, is an interface that will enable reliability engineers to accurately design large semi-Markov models. The user describes the failure behavior of a fault-tolerant computer system in an abstract, high-level language. The ASSIST program then automatically generates a corresponding semi-Markov model. The abstract language allows efficient description of large, complex systems; a one-page ASSIST-language description may result in a semi-Markov model with thousands of states and transitions. The ASSIST program also includes model-reduction techniques to facilitate efficient modeling of large systems. Instead of listing the individual states of the Markov model, reliability engineers can specify the rules governing the behavior of a system, and these are used to automatically generate the model. ASSIST reads an input file describing the failure behavior of a system in an abstract language and generates a Markov model in the format needed for input to SURE, the semi-Markov Unreliability Range Evaluator program, and PAWS/STEM, the Pade Approximation with Scaling program and Scaled Taylor Exponential Matrix. A Markov model consists of a number of system states and transitions between them. Each state in the model represents a possible state of the system in terms of which components have failed, which ones have been removed, etc. Within ASSIST, each state is defined by a state vector, where each element of the vector takes on an integer value within a defined range. An element can represent any meaningful characteristic, such as the number of working components of one type in the system, or the number of faulty components of another type in use. Statements representing transitions between states in the model have three parts: a condition expression, a destination expression, and a rate expression. The first expression is a Boolean expression describing the state space variable values of states for which the transition is valid. The second expression defines the destination state for the transition in terms of state space variable values. The third expression defines the distribution of elapsed time for the transition. The mathematical approach chosen to solve a reliability problem may vary with the size and nature of the problem. Although different solution techniques are utilized on different programs, it is possible to have a common input language. The Systems Validation Methods group at NASA Langley Research Center has created a set of programs that form the basis for a reliability analysis workstation. The set of programs are: SURE reliability analysis program (COSMIC program LAR-13789, LAR-14921); the ASSIST specification interface program (LAR-14193, LAR-14923), PAWS/STEM reliability analysis programs (LAR-14165, LAR-14920); and the FTC fault tree tool (LAR-14586, LAR-14922). FTC is used to calculate the top-event probability for a fault tree. PAWS/STEM and SURE are programs which interpret the same SURE language, but utilize different solution methods. ASSIST is a preprocessor that generates SURE language from a more abstract definition. SURE, ASSIST, and PAWS/STEM are also offered as a bundle. Please see the abstract for COS-10039/COS-10041, SARA - SURE/ASSIST Reliability Analysis Workstation, for pricing details. ASSIST was originally developed for DEC VAX series computers running VMS and was later ported for use on Sun computers running SunOS. The VMS version (LAR14193) is written in C-language and can be compiled with the VAX C compiler. The standard distribution medium for the VMS version of ASSIST is a 9-track 1600 BPI magnetic tape in VMSINSTAL format. It is also available on a TK50 tape cartridge in VMSINSTAL format. Executables are included. The Sun version (LAR14923) is written in ANSI C-language. An ANSI compliant C compiler is required in order to compile this package. The standard distribution medium for the Sun version of ASSIST is a .25 inch streaming magnetic tape cartridge in UNIX tar format. Both Sun3 and Sun4 executables are included. Electronic copies of the documentation in PostScript, TeX, and DVI formats are provided on the distribution medium. (The VMS distribution lacks the .DVI format files, however.) ASSIST was developed in 1986 and last updated in 1992. DEC, VAX, VMS, and TK50 are trademarks of Digital Equipment Corporation. SunOS, Sun3, and Sun4 are trademarks of Sun Microsystems, Inc. UNIX is a registered trademark of AT&T Bell Laboratories.

50 CFR 660.14 - Vessel Monitoring System (VMS) requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... transmissions to NMFS OLE prior to fishing: (1) Any vessel registered for use with a limited entry “A” endorsed... vessel re-enters the EEZ off the coasts of Washington, Oregon or California. Under this exemption, the... approved for this exemption. (iii) Permit transfer exemption. If the limited entry permit has been...

50 CFR 660.14 - Vessel Monitoring System (VMS) requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... transmissions to NMFS OLE prior to fishing: (1) Any vessel registered for use with a limited entry “A” endorsed... vessel re-enters the EEZ off the coasts of Washington, Oregon or California. Under this exemption, the... approved for this exemption. (iii) Permit exemption. If the limited entry permit had a change in vessel...

50 CFR 660.14 - Vessel Monitoring System (VMS) requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... transmissions to NMFS OLE prior to fishing: (1) Any vessel registered for use with a limited entry “A” endorsed... vessel re-enters the EEZ off the coasts of Washington, Oregon or California. Under this exemption, the... approved for this exemption. (iii) Permit exemption. If the limited entry permit had a change in vessel...

CloudStackProjectsNContributions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nielsen, Roy

2017-07-12

Collection of applications and cloud templates. Project currently based on www.packer.io for automation, www.github.com/boxcutter templates and the www.github.com/csd-dev-tools/ClockworkVMs application for wrapping both of the above for easy creation of virtual systems. Will in future also contain cloud templates tuned for various services, applications and purposes.

Mechanical design of NASA Ames Research Center vertical motion simulator

NASA Technical Reports Server (NTRS)

Engelbert, D. F.; Bakke, A. P.; Chargin, M. K.; Vallotton, W. C.

1976-01-01

NASA has designed and is constructing a new flight simulator with large vertical travel. Several aspects of the mechanical design of this Vertical Motion Simulator (VMS) are discussed, including the multiple rack and pinion vertical drive, a pneumatic equilibration system, and the friction-damped rigid link catenaries used as cable supports.

76 FR 36071 - Atlantic Highly Migratory Species; Vessel Monitoring Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-21

... 2003. The MTU VMS unit is currently required to report positions on an hourly basis when HMS fishing... position only, and, in some instances, do not even indicate whether the unit is on and functioning properly... to report while vessels are at sea. NMFS enforcement agents have also reported difficulty...

50 CFR 660.312 - Vessel Monitoring System (VMS) requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... his/her vessel by sending a written request to NMFS OLE specifying the following information: The... requested; and the location of the vessel while the exemption is in effect. NMFS OLE will issue a written... submitted, initial contact with NMFS OLE must be made by telephone, fax or email within 24 hours from when...

50 CFR 660.14 - Vessel Monitoring System (VMS) requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... specified in paragraph (b) of this section for his/her vessel by sending a written request to NMFS OLE... exemption is in effect. NMFS OLE will issue a written determination granting or denying the emergency... NMFS OLE must be made by telephone, fax or email within 24 hours from when the incident occurred...

FAST - FREEDOM ASSEMBLY SEQUENCING TOOL PROTOTYPE

NASA Technical Reports Server (NTRS)

Borden, C. S.

1994-01-01

FAST is a project management tool designed to optimize the assembly sequence of Space Station Freedom. An appropriate assembly sequence coordinates engineering, design, utilization, transportation availability, and operations requirements. Since complex designs tend to change frequently, FAST assesses the system level effects of detailed changes and produces output metrics that identify preferred assembly sequences. FAST incorporates Space Shuttle integration, Space Station hardware, on-orbit operations, and programmatic drivers as either precedence relations or numerical data. Hardware sequencing information can either be input directly and evaluated via the "specified" mode of operation or evaluated from the input precedence relations in the "flexible" mode. In the specified mode, FAST takes as its input a list of the cargo elements assigned to each flight. The program determines positions for the cargo elements that maximize the center of gravity (c.g.) margin. These positions are restricted by the geometry of the cargo elements and the location of attachment fittings both in the orbiter and on the cargo elements. FAST calculates every permutation of cargo element location according to its height, trunnion fitting locations, and required intercargo element spacing. Each cargo element is tested in both its normal and reversed orientation (rotated 180 degrees). The best solution is that which maximizes the c.g. margin for each flight. In the flexible mode, FAST begins with the first flight and determines all feasible combinations of cargo elements according to mass, volume, EVA, and precedence relation constraints. The program generates an assembly sequence that meets mass, volume, position, EVA, and precedence constraints while minimizing the total number of Shuttle flights required. Issues associated with ground operations, spacecraft performance, logistics requirements and user requirements will be addressed in future versions of the model. FAST is written in C-Language and has been implemented on DEC VAX series computers running VMS. The program is distributed in executable form. The source code is also provided, but it cannot be compiled without the Tree Manipulation Based Routines (TMBR) package from the Jet Propulsion Laboratory, which is not currently available from COSMIC. The main memory requirement is based on the data used to drive the FAST program. All applications should easily run on an installation with 10Mb of main memory. FAST was developed in 1990 and is a copyrighted work with all copyright vested in NASA. DEC, VAX and VMS are trademarks of Digital Equipment Corporation.

Bioaccumulation and trophic transfer of cyclic volatile methylsiloxanes (cVMS) in the aquatic marine food webs of the Oslofjord, Norway.

PubMed

Powell, David E; Schøyen, Merete; Øxnevad, Sigurd; Gerhards, Reinhard; Böhmer, Thomas; Koerner, Martin; Durham, Jeremy; Huff, Darren W

2018-05-01

The trophic transfer of cyclic methylsiloxanes (cVMS) in aquatic ecosystems is an important criterion for assessing bioaccumulation and ecological risk. Bioaccumulation and trophic transfer of cVMS, specifically octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5), and dodecamethylcyclohexasiloxane (D6), were evaluated for the marine food webs of the Inner and Outer Oslofjord, Norway. The sampled food webs included zooplankton, benthic macroinvertebrates, shellfish, and finfish species. Zooplankton, benthic macroinvertebrates, and shellfish occupied the lowest trophic levels (TL ≈2 to 3); northern shrimp (Pandalus borealis) and Atlantic herring (Clupea harengus) occupied the middle trophic levels (TL ≈3 to 4), and Atlantic cod (Gadus morhua) occupied the highest tropic level (TL>4.0). Trophic dynamics in the Oslofjord were best described as a compressed food web defined by demersal and pelagic components that were confounded by a diversity in prey organisms and feeding relationships. Lipid-normalized concentrations of D4, D5, and D6 were greatest in the lowest trophic levels and significantly decreased up the food web, with the lowest concentrations being observed in the highest trophic level species. Trophic magnification factors (TMF) for D4, D5, and D6 were <1.0 (range 0.3 to 0.9) and were consistent between the Inner and Outer Oslofjord, indicating that exposure did not impact TMF across the marine food web. There was no evidence to suggest biomagnification of cVMS in the Oslofjord. Rather, results indicated that trophic dilution of cVMS, not trophic magnification, occurred across the sampled food webs. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Geochemistry and chronology of the early Paleozoic diorites and granites in the Huangtupo volcanogenic massive sulfide (VMS) deposit, Eastern Tianshan, NW China: Implications for petrogenesis and geodynamic setting

NASA Astrophysics Data System (ADS)

Zheng, Jiahao; Chai, Fengmei; Feng, Wanyi; Yang, Fuquan; Shen, Ping

2018-03-01

The Eastern Tianshan orogen contains many late Paleozoic porphyry Cu and magmatic Cu-Ni deposits. Recent studies demonstrate that several early Paleozoic volcanogenic massive sulfide (VMS) Cu-polymetallic and porphyry Cu deposits were discovered in the northern part of Eastern Tianshan. This study presents zircon U-Pb, whole-rock geochemical, and Sr-Nd isotopic data for granites and diorites from the Huangtupo VMS Cu-Zn deposit, northern part of the Eastern Tianshan. Our results can provide constraints on the genesis of intermediate and felsic intrusions as well as early Paleozoic geodynamic setting of the northern part of Eastern Tianshan. LA-ICP-MS zircon U-Pb analyses suggest that the granites and diorites were formed at 435 ± 2 Ma and 440 ± 2 Ma, respectively. Geochemical characteristics suggest that the Huangtupo granites and diorites are metaluminous rocks, exhibiting typical subduction-related features such as enrichment in LILE and LREE and depletion in HFSE. The diorites have moderate Mg#, positive εNd(t) values (+6.4 to +7.3), and young Nd model ages, indicative of a depleted mantle origin. The granites exhibit mineral assemblages and geochemical characteristics of I-type granites, and they have positive εNd(t) values (+6.7 to +10.2) and young Nd model ages, suggesting a juvenile crust origin. The early Paleozoic VMS Cu-polymetallic and porphyry Cu deposits in the northern part of Eastern Tianshan were genetically related. The formation of the early Paleozoic magmatic rocks as well as VMS and porphyry Cu deposits in the northern part of Eastern Tianshan was due to a southward subduction of the Junggar oceanic plate.

Progesterone for Symptomatic Perimenopause Treatment - Progesterone politics, physiology and potential for perimenopause.

PubMed

Prior, J C

2011-01-01

Perimenopause, women's normal midlife reproductive transition, is highly symptomatic for about 20% of women who are currently inaccurately counseled and inappropriately treated with oral contraceptives, menopausal hormone therapy or hysterectomy. About 80% of perimenopausal women experience vasomotor symptoms (VMS), 25% have menorrhagia, and about 10% experience mastalgia. The majority of women describe varying intensities of sleep, -coping or mood difficulties. Women are more symptomatic because common knowledge inaccurately says that estradiol (E2) levels are dropping/deficient. Evidence shows that with disturbed brain-ovary feedbacks, E2 levels average 26% higher and soar erratically - some women describe feeling pregnant! Also, ovulation and progesterone (P4) levels become insufficient or absent. The most symptomatic women have higher E2 and lower P4 levels. Because P4 and E2 complement/counterbalance each other's tissue effects, oral micronized P4 (OMP4 300 mg at -bedtime) is a physiological therapy for treatment-seeking, symptomatic perimenopausal women. Given cyclically (cycle d 14-27, or 14 on/off) in menstruating midlife women, OMP4 decreases cyclic VMS, improves sleep and premenstrual mastalgia. Menorrhagia is treated with ibuprofen 200mg/6h plus OMP4 cycle d 4-28. For insulin resistance, metformin plus cyclic or daily OMP4 decreases insulin resistance and weight gain. Non-responsive migraines need daily OMP4 plus usual therapies. VMS and insomnia in late perimenopause respond to daily OMP4. In summary, OMP4 is a physiology-based therapy that improves sleep, treats VMS, does not increase breast proliferation or cancer risk, increases bone formation and has beneficial cardiovascular effects. A controlled trial is testing OMP4 for perimenopausal VMS - more evidence-based data are needed.

Initial Evaluations of LoC Prediction Algorithms Using the NASA Vertical Motion Simulator

NASA Technical Reports Server (NTRS)

Krishnakumar, Kalmanje; Stepanyan, Vahram; Barlow, Jonathan; Hardy, Gordon; Dorais, Greg; Poolla, Chaitanya; Reardon, Scott; Soloway, Donald

2014-01-01

Flying near the edge of the safe operating envelope is an inherently unsafe proposition. Edge of the envelope here implies that small changes or disturbances in system state or system dynamics can take the system out of the safe envelope in a short time and could result in loss-of-control events. This study evaluated approaches to predicting loss-of-control safety margins as the aircraft gets closer to the edge of the safe operating envelope. The goal of the approach is to provide the pilot aural, visual, and tactile cues focused on maintaining the pilot's control action within predicted loss-of-control boundaries. Our predictive architecture combines quantitative loss-of-control boundaries, an adaptive prediction method to estimate in real-time Markov model parameters and associated stability margins, and a real-time data-based predictive control margins estimation algorithm. The combined architecture is applied to a nonlinear transport class aircraft. Evaluations of various feedback cues using both test and commercial pilots in the NASA Ames Vertical Motion-base Simulator (VMS) were conducted in the summer of 2013. The paper presents results of this evaluation focused on effectiveness of these approaches and the cues in preventing the pilots from entering a loss-of-control event.

Evidence of a Volcanogenic Massive Sulfide (Znsbnd Pbsbnd Cusbnd Ag) district within the Tiébélé Birimian (Paleoproterozoic) Greenstone Belts, Southern Burkina Faso (West - Africa)

NASA Astrophysics Data System (ADS)

Ilboudo, Hermann; Lompo, Martin; Wenmenga, Urbain; Napon, Salif; Naba, Seta; Ngom, Papa Malick

2017-05-01

Twenty years after the discovery of the Perkoa Znsbnd Ag deposit, another type of Znsbnd Cusbnd Pb ± Ag Volcanogenic Massive Sulfide (VMS) subgroup of occurrences forming a district has been highlighted within the Paleoproterozoic Birimian Greenstone Belts of the West African Craton in Burkina Faso. The geology of the area is characterized by a series of dominantly mafic volcanic rocks with intercalated black shales which increase in proportion upwards in the stratigraphy. This stratigraphic package is overlain by a felsic volcanic sequence comprising reworked tuff and rhyolite. Although mineralization is locally associated with sedimentary rocks, it is more commonly found in rhyolites. The metamorphic grade is dominantly greenschist facies. The main lithologies in the mafic sequence range from basalt to andesite with associated gabbro. The felsic sequence consists of dacite to rhyolite with associated granitoids (granite-granodiorite-tonalite). The volcanic rocks are commonly tholeiitic (Zr/Y = 2-4.5) with relatively high Zr and Y content, although a limited number of samples plot in transitional (Zr/Y = 4.5-7) or calc-alkaline (Zr/Y = 7-25) fields. Rhyolites, which constitute the main mineralized rocks at Tiébélé, have similar key trace element signatures to other rhyolites-related known VMS systems worldwide. Both have low Zr/Y (<7) and low LaN/YbN (<6), which suggests low crustal residence times of magmas in extensional settings. Detailed investigations identified at least four VMS targets notably at Koubongo, Nabenia, Loubel and AVV (Aménagement de la Vallée des Voltas) extending over an area of 332 km2. Typical mineral assemblages defining VMS occurrences are mainly hosted by meta-sedimentary rocks and rhyolite but are also found as veins in tonalite. These assemblages can be grouped into four different styles: (i) Variably banded massive sulfides dominated by sphalerite over galena, pyrite, and chalcopyrite within metasediments; (ii) Pyrite-rich or pyrrhotite banded type associated with sphalerite, chalcopyrite, and galena within silicified and carbonatized units; (iii) Disseminated and finely oriented sulfides, including pyrite - pyrrhotite - magnetite ± sphalerite within quartz-phyric rhyolite; and (iv) Fracture filling pyrrhotite-rich - magnetite - sphalerite mineralization possibly within tonalite. Irrespective of the style of the mineralization, chemistry of altered and least altered rhyolite reveals a significant increase in Mg ± Fe and H2O, and a loss of K within mineralization associated alteration. This may suggest sea water leaching of underlying (?) mafic and sedimentary rocks, with Mgsbnd Fe transfer into the rhyolites concomitant with the loss of K. This paper highlights the features of new occurrences of VMS mineralization type within the Birimian system of West Africa. We think this could help for new discoveries along the belts. Exploration based upon ground mapping, geochemistry and geophysics is highly recommended.

Use of mindfulness, meditation and relaxation to treat vasomotor symptoms.

PubMed

Goldstein, K M; Shepherd-Banigan, M; Coeytaux, R R; McDuffie, J R; Adam, S; Befus, D; Goode, A P; Kosinski, A S; Masilamani, V; Williams, J W

2017-04-01

Postmenopausal women with bothersome vasomotor symptoms (VMS) often seek alternatives to hormone-based treatment due to medication risks or personal preference. We sought to identify the effects of meditation, mindfulness, hypnosis and relaxation on VMS and health-related quality of life in perimenopausal and postmenopausal women. To do this, we conducted an umbrella review supplemented by new randomized, controlled trials (RCTs) published since the most recent good-quality systematic review for eligible interventions. We searched MEDLINE and the Cochrane Database of Systematic Reviews, PubMed, EMBASE, CINAHL and the Allied and Complementary Medicine Databases. We identified five systematic reviews and six new RCTs that met eligibility criteria. In a new meta-analysis examining four RCTs comparing paced respiration with a control group, we found that paced respiration is not associated with a statistically significant decrease in VMS frequency (standardized mean difference (SMD) 0.04, 95% confidence interval (CI) -0.73 to 0.82, I 2  =   56.6%, three trials) or severity (SMD 0.06, 95% CI -0.69 to 0.80; I 2  =   65.1%, three trials). There was not sufficient new information to conduct meta-analyses that examined the effect of mindfulness or hypnosis on our outcomes of interest. No effect on VMS or quality of life was found between various relaxation or mindfulness interventions.

A novel process for recovering valuable metals from waste nickel-cadmium batteries.

PubMed

Huang, Kui; Li, Jia; Xu, Zhenming

2009-12-01

The environment is seriously polluted due to improper and inefficient recycling of waste nickel-cadmium (Ni-Cd) batteries in China. The aim of this work is aimed to seek an environmentally friendly recycling process for resolving the negative impacts on environmental and human health resulting from waste Ni-Cd batteries. This work investigates the fundamentals of waste Ni-Cd batteries recycling through vacuum metallurgy separation (VMS) and magnetic separation (MS). The results obtained demonstrate that the optimal temperature, the addition of carbon powder, and heating time in VMS are 1023 K, 1 wt %, 1.5 h, respectively. More than 99.2 wt % Cd is recovered under the optimal experimental condition, and the Cd purity is 99.98%. Around 98.0 wt % ferromagnetic materials are recovered through MS under 60 rpm rotational speed and the recovery ratios of Fe, Ni and Co are 99.2 wt %, 96.1 wt %, and 86.4 wt %, respectively. The composition of ferromagnetic fractions in the residue after VMS increases from 82.3 to 99.6%. Based on these results, a process (including dismantling and crushing, VMS and MS) for recycling of waste Ni-Cd batteries is proposed. This novel process provides a possibility for recycling waste Ni-Cd batteries in a large industrial scale.

FROST - FREEDOM OPERATIONS SIMULATION TEST VERSION 1.0

NASA Technical Reports Server (NTRS)

Deshpande, G. K.

1994-01-01

The Space Station Freedom Information System processes and transmits data between the space station and the station controllers and payload operators on the ground. Components of the system include flight hardware, communications satellites, software and ground facilities. FROST simulates operation of the SSF Information System, tracking every data packet from generation to destination for both uplinks and downlinks. This program collects various statistics concerning the SSF Information System operation and provides reports of these at user-specified intervals. Additionally, FROST has graphical display capability to enhance interpretation of these statistics. FROST models each of the components of the SSF Information System as an object, to which packets are generated, received, processed, transmitted, and/or dumped. The user must provide the information system design with specified parameters and inter-connections among objects. To aid this process, FROST supplies an example SSF Information System for simulation, but this example must be copied before it is changed and used for further simulation. Once specified, system architecture and parameters are put into the input file, named the Test Configuration Definition (TCD) file. Alternative system designs can then be simulated simply by editing the TCD file. Within this file the user can define new objects, alter object parameters, redefine paths, redefine generation rates and windows, and redefine object interconnections. At present, FROST does not model every feature of the SSF Information System, but it is capable of simulating many of the system's important functions. To generate data messages, which can come from any object, FROST defines "windows" to specify when, what kind, and how much of that data is generated. All messages are classified by priority as either (1)emergency (2)quick look (3)telemetry or (4)payload data. These messages are processed by all objects according to priority. That is, all priority 1 (emergency) messages are processed and transmitted before priority 2 messages, and so forth. FROST also allows for specification of "pipeline" or "direct" links. Pipeline links are used to broadcast at constant intervals, while direct links transmit messages only when packets are ready for transmission. FROST allows the user substantial flexibility to customize output for a simulation. Output consists of tables and graphs, as specified in the TCD file, to be generated at the specified interval. These tables may be generated at short intervals during the run to produce snapshots as simulation proceeds, or generated after the run to give a summary of the entire run. FROST is written in SIMSCRIPT II.5 (developed by CACI) for DEC VAX series computers running VMS. FROST was developed on a VAX 8700 and is intended to be run on large VAXes with at least 32Mb of memory. The main memory requirement for FROST is dependent on the number of processors used in the simulation and the event time. The standard distribution medium for this package is a 9-track 1600 BPI DEC VAX BACKUP Format Magnetic Tape. An executable is included on the tape in addition to the source code. FROST was developed in 1990 and is a copyrighted work with all copyright vested in NASA. DEC, VAX and VMS are registered trademarks of Digital Equipment Corporation. IBM PC is a trademark of International Business Machines. SIMSCRIPT II.5 is a trademark of CACI.

A Monolithic Electrochemical Micro Seismic Sensor Capable of Monitoring Three-Dimensional Vibrations

PubMed Central

Chen, Lianhong; Sun, Zhenyuan; Li, Guanglei; Chen, Deyong; Wang, Junbo

2018-01-01

A monolithic electrochemical micro seismic sensor capable of monitoring three-axial vibrations was proposed in this paper. The proposed micro sensor mainly consisted of four sensing units interconnected within flow channels and by interpreting the voltage outputs of the sensing units, vibrations with arbitrary directions can be quantified. The proposed seismic sensors are fabricated based on MEMS technologies and characterized, which produced sensitivities along x, y, and z axes as 2473.2 ± 184.5 V/(m/s), 2261.7 ± 119.6 V/(m/s), and 3480.7 ± 417.2 V/(m/s) at 30 Hz. In addition, the vibrations in x-y, x-z, and y-z planes were applied to the developed seismic sensors, leading to comparable monitoring results after decoupling calculations with the input velocities. Furthermore, the results have shown its feasibilities for seismic data recording. PMID:29614720

Middle ear abnormalities in Van Maldergem syndrome.

PubMed

Verheij, Emmy; Thomeer, Henricus G X M; Pameijer, Frank A; Topsakal, Vedat

2017-01-01

Van Maldergem syndrome (VMS) is a very rare syndrome that was first described in 1992. The main features of this syndrome comprise intellectual disability, blepharo-naso-facial malformation, and hand anomalies. Almost all nine described patients have been shown to be affected by conductive hearing impairment attributed to microtia, and atresia of the outer ear canal. Here, we present a VMS patient with congenital malformations of the middle ear as the main reason for severe conductive bilateral hearing impairment. To our knowledge, this is the first report to describe middle ear abnormalities in VMS. These malformations were seen on high resolution Computed Tomography scanning and during an exploratory tympanotomy. Due to the severity of the middle ear abnormalities and the risk for facial nerve damage, the patient was not offered an ossicular chain reconstruction but a bone conduction device after this exploratory tympanotomy. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

PAWS/STEM - PADE APPROXIMATION WITH SCALING AND SCALED TAYLOR EXPONENTIAL MATRIX (SUN VERSION)

NASA Technical Reports Server (NTRS)

Butler, R. W.

1994-01-01

Traditional fault-tree techniques for analyzing the reliability of large, complex systems fail to model the dynamic reconfiguration capabilities of modern computer systems. Markov models, on the other hand, can describe fault-recovery (via system reconfiguration) as well as fault-occurrence. The Pade Approximation with Scaling (PAWS) and Scaled Taylor Exponential Matrix (STEM) programs provide a flexible, user-friendly, language-based interface for the creation and evaluation of Markov models describing the behavior of fault-tolerant reconfigurable computer systems. PAWS and STEM produce exact solutions for the probability of system failure and provide a conservative estimate of the number of significant digits in the solution. The calculation of the probability of entering a death state of a Markov model (representing system failure) requires the solution of a set of coupled differential equations. Because of the large disparity between the rates of fault arrivals and system recoveries, Markov models of fault-tolerant architectures inevitably lead to numerically stiff differential equations. Both PAWS and STEM have the capability to solve numerically stiff models. These complementary programs use separate methods to determine the matrix exponential in the solution of the model's system of differential equations. In general, PAWS is better suited to evaluate small and dense models. STEM operates at lower precision, but works faster than PAWS for larger models. The mathematical approach chosen to solve a reliability problem may vary with the size and nature of the problem. Although different solution techniques are utilized on different programs, it is possible to have a common input language. The Systems Validation Methods group at NASA Langley Research Center has created a set of programs that form the basis for a reliability analysis workstation. The set of programs are: SURE reliability analysis program (COSMIC program LAR-13789, LAR-14921); the ASSIST specification interface program (LAR-14193, LAR-14923), PAWS/STEM reliability analysis programs (LAR-14165, LAR-14920); and the FTC fault tree tool (LAR-14586, LAR-14922). FTC is used to calculate the top-event probability for a fault tree. PAWS/STEM and SURE are programs which interpret the same SURE language, but utilize different solution methods. ASSIST is a preprocessor that generates SURE language from a more abstract definition. SURE, ASSIST, and PAWS/STEM are also offered as a bundle. Please see the abstract for COS-10039/COS-10041, SARA - SURE/ASSIST Reliability Analysis Workstation, for pricing details. PAWS/STEM was originally developed for DEC VAX series computers running VMS and was later ported for use on Sun computers running SunOS. The package is written in PASCAL, ANSI compliant C-language, and FORTRAN 77. The standard distribution medium for the VMS version of PAWS/STEM (LAR-14165) is a 9-track 1600 BPI magnetic tape in VMSINSTAL format. It is also available on a TK50 tape cartridge in VMSINSTAL format. Executables are included. The standard distribution medium for the Sun version of PAWS/STEM (LAR-14920) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. Both Sun3 and Sun4 executables are included. PAWS/STEM was developed in 1989 and last updated in 1991. DEC, VAX, VMS, and TK50 are trademarks of Digital Equipment Corporation. SunOS, Sun3, and Sun4 are trademarks of Sun Microsystems, Inc. UNIX is a registered trademark of AT&T Bell Laboratories.

DET/MPS - THE GSFC ENERGY BALANCE PROGRAM, DIRECT ENERGY TRANSFER/MULTIMISSION SPACECRAFT MODULAR POWER SYSTEM (DEC VAX VMS VERSION)

NASA Technical Reports Server (NTRS)

Jagielski, J. M.

1994-01-01

The DET/MPS programs model and simulate the Direct Energy Transfer and Multimission Spacecraft Modular Power System in order to aid both in design and in analysis of orbital energy balance. Typically, the DET power system has the solar array directly to the spacecraft bus, and the central building block of MPS is the Standard Power Regulator Unit. DET/MPS allows a minute-by-minute simulation of the power system's performance as it responds to various orbital parameters, focusing its output on solar array output and battery characteristics. While this package is limited in terms of orbital mechanics, it is sufficient to calculate eclipse and solar array data for circular or non-circular orbits. DET/MPS can be adjusted to run one or sequential orbits up to about one week, simulated time. These programs have been used on a variety of Goddard Space Flight Center spacecraft projects. DET/MPS is written in FORTRAN 77 with some VAX-type extensions. Any FORTRAN 77 compiler that includes VAX extensions should be able to compile and run the program with little or no modifications. The compiler must at least support free-form (or tab-delineated) source format and 'do do-while end-do' control structures. DET/MPS is available for three platforms: GSC-13374, for DEC VAX series computers running VMS, is available in DEC VAX Backup format on a 9-track 1600 BPI tape (standard distribution) or TK50 tape cartridge; GSC-13443, for UNIX-based computers, is available on a .25 inch streaming magnetic tape cartridge in UNIX tar format; and GSC-13444, for Macintosh computers running AU/X with either the NKR FORTRAN or AbSoft MacFORTRAN II compilers, is available on a 3.5 inch 800K Macintosh format diskette. Source code and test data are supplied. The UNIX version of DET requires 90K of main memory for execution. DET/MPS was developed in 1990. A/UX and Macintosh are registered trademarks of Apple Computer, Inc. VMS, DEC VAX and TK50 are trademarks of Digital Equipment Corporation. UNIX is a registered trademark of AT&T Bell Laboratories.

Ada Compiler Validation Summary Report: Certificate Number 900726W1. 11022 Verdix Corporation, VADS VAX/VMS= Intel 386, VMS 5.2, VAda-110-03315, Version 6.0, MicroVAX 3100 = iSBC 386/32

DTIC Science & Technology

1991-01-22

iSBC 386/32, bare machine Customer Agreement Number: 90-05-29- VRX See Section 3.1 for any additional information about the testing environment. As a...Defense Avail and/or Washington DC 20301 -Dist Special ----- ---- i AVF Control Number: AVF-VSR-379.0191 22 January 1991 90-05-29- VRX Ada COMPILER

A Tale Of 160 Scientists, Three Applications, a Workshop and a Cloud

NASA Astrophysics Data System (ADS)

Berriman, G. B.; Brinkworth, C.; Gelino, D.; Wittman, D. K.; Deelman, E.; Juve, G.; Rynge, M.; Kinney, J.

2013-10-01

The NASA Exoplanet Science Institute (NExScI) hosts the annual Sagan Workshops, thematic meetings aimed at introducing researchers to the latest tools and methodologies in exoplanet research. The theme of the Summer 2012 workshop, held from July 23 to July 27 at Caltech, was to explore the use of exoplanet light curves to study planetary system architectures and atmospheres. A major part of the workshop was to use hands-on sessions to instruct attendees in the use of three open source tools for the analysis of light curves, especially from the Kepler mission. Each hands-on session involved the 160 attendees using their laptops to follow step-by-step tutorials given by experts. One of the applications, PyKE, is a suite of Python tools designed to reduce and analyze Kepler light curves; these tools can be invoked from the Unix command line or a GUI in PyRAF. The Transit Analysis Package (TAP) uses Markov Chain Monte Carlo (MCMC) techniques to fit light curves under the Interactive Data Language (IDL) environment, and Transit Timing Variations (TTV) uses IDL tools and Java-based GUIs to confirm and detect exoplanets from timing variations in light curve fitting. Rather than attempt to run these diverse applications on the inevitable wide range of environments on attendees laptops, they were run instead on the Amazon Elastic Cloud 2 (EC2). The cloud offers features ideal for this type of short term need: computing and storage services are made available on demand for as long as needed, and a processing environment can be customized and replicated as needed. The cloud environment included an NFS file server virtual machine (VM), 20 client VMs for use by attendees, and a VM to enable ftp downloads of the attendees' results. The file server was configured with a 1 TB Elastic Block Storage (EBS) volume (network-attached storage mounted as a device) containing the application software and attendees home directories. The clients were configured to mount the applications and home directories from the server via NFS. All VMs were built with CentOS version 5.8. Attendees connected their laptops to one of the client VMs using the Virtual Network Computing (VNC) protocol, which enabled them to interact with a remote desktop GUI during the hands-on sessions. We will describe the mechanisms for handling security, failovers, and licensing of commercial software. In particular, IDL licenses were managed through a server at Caltech, connected to the IDL instances running on Amazon EC2 via a Secure Shell (ssh) tunnel. The system operated flawlessly during the workshop.

A Brief Vestibular/Ocular Motor Screening (VOMS) Assessment to Evaluate Concussions

PubMed Central

Mucha, Anne; Collins, Michael W.; Elbin, R.J.; Furman, Joseph M.; Troutman-Enseki, Cara; DeWolf, Ryan M.; Marchetti, Greg; Kontos, Anthony P.

2014-01-01

Background Vestibular and ocular motor impairments and symptoms have been documented in patients with sport-related concussions. However, there is no current brief clinical screen to assess and monitor these issues. Purpose To describe and provide initial data for the internal consistency and validity of a brief clinical screening tool for vestibular and ocular motor impairments and symptoms after sport-related concussions. Study Design Cross-sectional study; Level of evidence, 2. Methods Sixty-four patients, aged 13.9 ± 2.5 years and seen approximately 5.5 ± 4.0 days after a sport-related concussion, and 78 controls were administered the Vestibular/Ocular Motor Screening (VOMS) assessment, which included 5 domains: (1) smooth pursuit, (2) horizontal and vertical saccades, (3) near point of convergence (NPC) distance, (4) horizontal vestibular ocular reflex (VOR), and (5) visual motion sensitivity (VMS). Participants were also administered the Post-Concussion Symptom Scale (PCSS). Results Sixty-one percent of patients reported symptom provocation after at least 1 VOMS item. All VOMS items were positively correlated to the PCSS total symptom score. The VOR (odds ratio [OR], 3.89; P <.001) and VMS (OR, 3.37; P <.01) components of the VOMS were most predictive of being in the concussed group. An NPC distance ≥5 cm and any VOMS item symptom score ≥2 resulted in an increase in the probability of correctly identifying concussed patients of 38% and 50%, respectively. Receiver operating characteristic curves supported a model including the VOR, VMS, NPC distance, and ln(age) that resulted in a high predicted probability (area under the curve = 0.89) for identifying concussed patients. Conclusion The VOMS demonstrated internal consistency as well as sensitivity in identifying patients with concussions. The current findings provide preliminary support for the utility of the VOMS as a brief vestibular/ocular motor screen after sport-related concussions. The VOMS may augment current assessment tools and may serve as a single component of a comprehensive approach to the assessment of concussions. PMID:25106780

Prevalence and severity of vasomotor symptoms and joint pain in women at midlife in Bangladesh: a population-based survey.

PubMed

Islam, Rakibul M; Bell, Robin J; Billah, Baki; Hossain, Mohammad B; Davis, Susan R

2016-07-01

The aim of the study was to document the prevalence of menopausal symptoms and the extent to which women are bothered by vasomotor symptoms (VMS) and joint pain in Bangladesh. A total of 1,590 women, aged 30 to 59 years, participated in a cross-sectional, questionnaire-based study between September 2013 and March 2014. The main outcome measures were moderate to severely bothersome VMS and joint pain, measured by the Menopause-Specific Quality of Life questionnaire. Of participants, 59.4% were premenopausal, 8.4% perimenopausal, and 32.3% postmenopausal. Approximately all women reached menopause by the age of 50 years. The prevalence of moderate to severely bothersome VMS was 4.1% in premenopausal, 33.3% in perimenopausal, and 28.2% in postmenopausal women. Factors associated with moderate to severely bothersome VMS were being perimenopausal (odds ratio [OR] 46.34, 95% CI 13.29-161.56; P < 0.001) or postmenopausal (OR 19.15, 95% CI 5.63-65.11; P < 0.001) and obesity (OR 2.20, 95% CI 1.03-4.71; P = 0.042). The prevalence of moderate to severely bothersome joint pain was 40.3% in postmenopausal, 36.2% in perimenopausal, and 15.3% in premenopausal women. Moderate to severely bothersome joint pain was more likely both in perimenopausal (OR 2.64, 95% CI 1.63-4.29; P < 0.001) and postmenopausal women (OR 2.96, 95% CI 2.06-4.24; P < 0.001). Moderate to severely bothersome joint pain was also more likely in women with no education compared with women having education beyond secondary school (OR 2.38, 95% CI 1.02-2.32; P < 0.001). No women reported prescription therapy for menopausal symptoms. This study demonstrates that a high proportion of Bangladeshi women experience moderate to severely bothersome VMS and joint pain. Despite the considerable symptom prevalence, no women reported treatment, suggesting that menopause remains neglected in Bangladesh.

Measurement of cyclic volatile methylsiloxanes in the aquatic environment using low-density polyethylene passive sampling devices using an in-field calibration study--challenges and guidance.

PubMed

Bruemmer, Janine; Falcon, Raquel; Greenwood, Richard; Mills, Graham A; Hastie, Colin; Sparham, Chris; van Egmond, Roger

2015-03-01

Cyclic volatile methylsiloxanes (cVMS) are used in personal care products and are hydrophobic, volatile and persistent. Their environmental water concentrations are low and are difficult to detect using conventional sampling methods. This study shows the potential of passive sampling for cVMS. We used low-density polyethylene (LDPE) samplers and in-field calibration methods for octamethylcyclotetrasiloxane (D4) and decamethylcyclopentasiloxane (D5). (13)C-D4 and (13)C-D5, methyltris(trimethylsiloxy)silane (MT), tetrakis(trimethylsiloxy)silane (TK), and five deuterated polycyclic aromatic hydrocarbons (PAHs) were used as performance reference compounds (PRCs). Samplers were calibrated (7-d) using effluent at a treatment plant, with uptake of cVMS and losses of the PRCs measured at 12 time-points. Concentrations of D4 (53ngL(-1)) and D5 (1838ngL(-1)) were stable in the effluent. Uptake of D4 and loss of (13)C-D4 were isotropic and equilibrium was approached by 7-d. Two estimates of sampler uptake rate (Rs) were 2.1Ld(-1) and 2.5Ld(-1). The estimated log LDPE/water partition coefficient was 4.4. The uptake of D5 was slower (Rs=0.32Ld(-1)) and equilibrium was not reached. Offloading of (13)C-D5, MT and TK were slow, and isotropic behaviour was not demonstrated for D5. Offloading of PAHs followed the predicted pattern for LDPE. Uptake of cVMS appeared to be under membrane control, due to low diffusion coefficients in LDPE. Samplers can monitor time-weighted average concentrations of D4 for less than a week, and D5 for longer periods. LDPE samplers allow cVMS to be determined at lower concentrations than by spot sampling methods. Copyright © 2014 Elsevier Ltd. All rights reserved.

Sulfur isotope and trace element data from ore sulfides in the Noranda district (Abitibi, Canada): implications for volcanogenic massive sulfide deposit genesis

NASA Astrophysics Data System (ADS)

Sharman, Elizabeth R.; Taylor, Bruce E.; Minarik, William G.; Dubé, Benoît; Wing, Boswell A.

2015-06-01

We examine models for volcanogenic massive sulfide (VMS) mineralization in the ~2.7-Ga Noranda camp, Abitibi subprovince, Superior Province, Canada, using a combination of multiple sulfur isotope and trace element data from ore sulfide minerals. The Noranda camp is a well-preserved, VMS deposit-rich area that is thought to represent a collapsed volcanic caldera. Due to its economic value, the camp has been studied extensively, providing a robust geological framework within which to assess the new data presented in this study. We explore previously proposed controls on mineralization within the Noranda camp and, in particular, the exceptional Au-rich Horne and Quemont deposits. We present multiple sulfur isotope and trace element compositional data for sulfide separates representing 25 different VMS deposits and "showings" within the Noranda camp. Multiple sulfur isotope data for this study have δ34SV-CDT values of between -1.9 and +2.5 ‰, and Δ33SV-CDT values of between -0.59 and -0.03 ‰. We interpret the negative Δ33S values to be due to a contribution of sulfur that originated as seawater sulfate to form the ore sulfides of the Noranda camp VMS deposits. The contribution of seawater sulfate increased with the collapse and subsequent evolution of the Noranda caldera, an inference supported by select trace and major element analyses. In particular, higher concentrations of Se occur in samples with Δ33S values closer to 0 ‰, as well as lower Fe/Zn ratios in sphalerite, suggesting lower pressures and temperatures of formation. We also report a relationship between average Au grade and Δ33S values within Au-rich VMS deposits of the Noranda camp, whereby higher gold grades are associated with near-zero Δ33S values. From this, we infer a dominance of igneous sulfur in the gold-rich deposits, either leached from the volcanic pile and/or directly degassed from an associated intrusion.

Ada Compiler Validation Summary Report: Certificate Number: 891116W1.10194, Verdix Corporation, VADS VMS-MIL-STD-1750A, V6.0, MP, DEC MicroVAX III Host and Tektronix 1750A Emulator (Ethernet Download), v1.00-00 Target

DTIC Science & Technology

1989-11-16

VRX Ada COMPILER VALIDATION SUMMARY REPORT; Certificate Number: 891116W1.10194 Verdix Corporation VADS VMS->MIL-STD-1750A, V6.0, MP DEC MicroVAX III...1.10 Customer Agreement Number: 89-08-30- VRX This report has been reviewed and i- approved. Ada Validation Facility Steven P. Wilson Technical

Ada Compiler Validation Summary Report: NATO SWG on APSE Compiler for VAX/VMS to MC68020 Version VCM1.82-02, VAX 8350 under VMS 5.4-1 with CAIS 5.5E Host Motorola MVME 133XT (MC68020 bare machine) Target

DTIC Science & Technology

1992-03-06

and their respective value. Macro Parameter Macro Value SACCSIZE 32 $ AL IGNMENT 4 $COUNT-LAST 2 147 483 647 SDEFAULT KMNSIZE 2147483648 $DEFAULT-STOR...The subprogram raise..exception- Azif a raises the exception -described by the information record supplied as parameter. -In addition to the subprogram

UFMulti: A new parallel processing software system for HEP

NASA Astrophysics Data System (ADS)

Avery, Paul; White, Andrew

1989-12-01

UFMulti is a multiprocessing software package designed for general purpose high energy physics applications, including physics and detector simulation, data reduction and DST physics analysis. The system is particularly well suited for installations where several workstation or computers are connected through a local area network (LAN). The initial configuration of the software is currently running on VAX/VMS machines with a planned extension to ULTRIX, using the new RISC CPUs from Digital, in the near future.

IDSP- INTERACTIVE DIGITAL SIGNAL PROCESSOR

NASA Technical Reports Server (NTRS)

Mish, W. H.

1994-01-01

The Interactive Digital Signal Processor, IDSP, consists of a set of time series analysis "operators" based on the various algorithms commonly used for digital signal analysis work. The processing of a digital time series to extract information is usually achieved by the application of a number of fairly standard operations. However, it is often desirable to "experiment" with various operations and combinations of operations to explore their effect on the results. IDSP is designed to provide an interactive and easy-to-use system for this type of digital time series analysis. The IDSP operators can be applied in any sensible order (even recursively), and can be applied to single time series or to simultaneous time series. IDSP is being used extensively to process data obtained from scientific instruments onboard spacecraft. It is also an excellent teaching tool for demonstrating the application of time series operators to artificially-generated signals. IDSP currently includes over 43 standard operators. Processing operators provide for Fourier transformation operations, design and application of digital filters, and Eigenvalue analysis. Additional support operators provide for data editing, display of information, graphical output, and batch operation. User-developed operators can be easily interfaced with the system to provide for expansion and experimentation. Each operator application generates one or more output files from an input file. The processing of a file can involve many operators in a complex application. IDSP maintains historical information as an integral part of each file so that the user can display the operator history of the file at any time during an interactive analysis. IDSP is written in VAX FORTRAN 77 for interactive or batch execution and has been implemented on a DEC VAX-11/780 operating under VMS. The IDSP system generates graphics output for a variety of graphics systems. The program requires the use of Versaplot and Template plotting routines and IMSL Math/Library routines. These software packages are not included in IDSP. The virtual memory requirement for the program is approximately 2.36 MB. The IDSP system was developed in 1982 and was last updated in 1986. Versaplot is a registered trademark of Versatec Inc. Template is a registered trademark of Template Graphics Software Inc. IMSL Math/Library is a registered trademark of IMSL Inc.

Mapping known and potential mineral occurrences and host rocks in the Bonnifield Mining District using minimal cloud- and snow-cover ASTER data: Chapter E in Recent U.S. Geological Survey studies in the Tintina Gold Province, Alaska, United States, and Yukon, Canada--results of a 5-year project

USGS Publications Warehouse

Hubbard, Bernard E.; Dusel-Bacon, Cynthia; Rowan, Lawrence C.; Eppinger, Robert G.; Gough, Larry P.; Day, Warren C.

2007-01-01

On July 8, 2003, the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor acquired satellite imagery of a 60-kilometer-wide swath covering a portion of the Bonnifield mining district within the southernmost part of the Tintina Gold Province, Alaska, under unusually favorable conditions of minimal cloud and snow cover. Although rocks from more than eight different lithotectonic terranes are exposed within the extended swath of data, we focus on volcanogenic massive sulfides (VMS) and porphyry deposits within the Yukon-Tanana terrane (YTT), the largest Mesozoic accretionary terrane exposed between the Denali fault system to the south of Fairbanks and the Tintina fault system to the north of Fairbanks. Comparison of thermal-infrared region (TIR) decorrelation stretch data to available geologic maps indicates that rocks from the YTT contain a wide range of rock types ranging in composition from mafic metavolcanic rocks to felsic rock types such as metarhyolites, pelitic schists, and quartzites. The nine-band ASTER visible-near-infrared region--short-wave infrared region (VNIR-SWIR) reflectance data and spectral matched-filter processing were used to map hydrothermal alteration patterns associated with VMS and porphyry deposit types. In particular, smectite, kaolinite, opaline silica, jarosite and (or) other ferric iron minerals defined narrow (less than 250-meter diameter) zonal patterns around Red Mountain and other potential VMS targets. Using ASTER we identified some of the known mineral deposits in the region, as well as mineralogically similar targets that may represent potential undiscovered deposits. Some known deposits were not identified and may have been obscured by vegetation or snow cover or were too small to be resolved.

Novel residual-based large eddy simulation turbulence models for incompressible magnetohydrodynamics

NASA Astrophysics Data System (ADS)

Sondak, David

The goal of this work was to develop, introduce, and test a promising computational paradigm for the development of turbulence models for incompressible magnetohydrodynamics (MHD). MHD governs the behavior of an electrically conducting fluid in the presence of an external electromagnetic (EM) field. The incompressible MHD model is used in many engineering and scientific disciplines from the development of nuclear fusion as a sustainable energy source to the study of space weather and solar physics. Many interesting MHD systems exhibit the phenomenon of turbulence which remains an elusive problem from all scientific perspectives. This work focuses on the computational perspective and proposes techniques that enable the study of systems involving MHD turbulence. Direct numerical simulation (DNS) is not a feasible approach for studying MHD turbulence. In this work, turbulence models for incompressible MHD were developed from the variational multiscale (VMS) formulation wherein the solution fields were decomposed into resolved and unresolved components. The unresolved components were modeled with a term that is proportional to the residual of the resolved scales. Two additional MHD models were developed based off of the VMS formulation: a residual-based eddy viscosity (RBEV) model and a mixed model that partners the VMS formulation with the RBEV model. These models are endowed with several special numerical and physics features. Included in the numerical features is the internal numerical consistency of each of the models. Physically, the new models are able to capture desirable MHD physics such as the inverse cascade of magnetic energy and the subgrid dynamo effect. The models were tested with a Fourier-spectral numerical method and the finite element method (FEM). The primary test problem was the Taylor-Green vortex. Results comparing the performance of the new models to DNS were obtained. The performance of the new models was compared to classic and cutting-edge dynamic Smagorinsky eddy viscosity (DSEV) models. The new models typically outperform the classical models.

KNET - DISTRIBUTED COMPUTING AND/OR DATA TRANSFER PROGRAM

NASA Technical Reports Server (NTRS)

Hui, J.

1994-01-01

KNET facilitates distributed computing between a UNIX compatible local host and a remote host which may or may not be UNIX compatible. It is capable of automatic remote login. That is, it performs on the user's behalf the chore of handling host selection, user name, and password to the designated host. Once the login has been successfully completed, the user may interactively communicate with the remote host. Data output from the remote host may be directed to the local screen, to a local file, and/or to a local process. Conversely, data input from the keyboard, a local file, or a local process may be directed to the remote host. KNET takes advantage of the multitasking and terminal mode control features of the UNIX operating system. A parent process is used as the upper layer for interfacing with the local user. A child process is used for a lower layer for interfacing with the remote host computer, and optionally one or more child processes can be used for the remote data output. Output may be directed to the screen and/or to the local processes under the control of a data pipe switch. In order for KNET to operate, the local and remote hosts must observe a common communications protocol. KNET is written in ANSI standard C-language for computers running UNIX. It has been successfully implemented on several Sun series computers and a DECstation 3100 and used to run programs remotely on VAX VMS and UNIX based computers. It requires 100K of RAM under SunOS and 120K of RAM under DEC RISC ULTRIX. An electronic copy of the documentation is provided on the distribution medium. The standard distribution medium for KNET is a .25 inch streaming magnetic tape cartridge in UNIX tar format. It is also available on a 3.5 inch diskette in UNIX tar format. KNET was developed in 1991 and is a copyrighted work with all copyright vested in NASA. UNIX is a registered trademark of AT&T Bell Laboratories. Sun and SunOS are trademarks of Sun Microsystems, Inc. DECstation, VAX, VMS, and ULTRIX are trademarks of Digital Equipment Corporation.

The very massive star content of the nuclear star clusters in NGC 5253

NASA Astrophysics Data System (ADS)

Smith, Linda J.; Crowther, Paul A.; Calzetti, Daniela

2017-11-01

The blue compact dwarf galaxy NGC 5253 hosts a very young starburst containing twin nuclear star clusters. Calzetti et al. (2015) find that the two clusters have an age of 1 Myr, in contradiction to the age of 3-5 Myr inferred from the presence of Wolf-Rayet (W-R) spectral features. We use Hubble Space Telescope (HST) far-ultraviolet (FUV) and ground-based optical spectra to show that the cluster stellar features arise from very massive stars (VMS), with masses greater than 100 M⊙, at an age of 1-2 Myr. We discuss the implications of this and show that the very high ionizing flux can only be explained by VMS. We further discuss our findings in the context of VMS contributing to He ii λ1640 emission in high redshift galaxies, and emphasize that population synthesis models with upper mass cut-offs greater than 100 M⊙ are crucial for future studies of young massive clusters.

Direct intralesional ethanol sclerotherapy of extensive venous malformations with oropharyngeal involvement after a temporary tracheotomy in the head and neck: Initial results.

PubMed

Wang, Deming; Su, Lixin; Han, Yifeng; Wang, Zhenfeng; Zheng, Lianzhou; Li, Jichen; Fan, Xindong

2017-02-01

The purpose of this study was to evaluate the safety and efficacy of direct intralesional ethanol sclerotherapy for venous malformations (VMs) with oropharyngeal involvement after a temporary tracheotomy. A retrospective assessment was carried out to evaluate the efficacy of direct intralesional ethanol sclerotherapy on 21 consecutive patients presenting with extensive VMs involving the oropharynx in the head and neck and who had undergone tracheotomy. Of the 21 patients, 4 were treated once and 17 were treated from 2 to 5 times. The duration of follow-up was, on average, 9.1 months. Of the 21 patients, 7 (33.3%) had complete palliation, whereas the rest (66.7%) achieved partial palliation. Minor complications occurred in 12 of the 21 patients. Direct intralesional ethanol sclerotherapy after a temporary tracheotomy is a safe and effective treatment for extensive VMs involving oropharyngeal areas of the head and neck. © 2016 Wiley Periodicals, Inc. Head Neck 39: 288-296, 2017. © 2016 Wiley Periodicals, Inc.

On Raviart-Thomas and VMS formulations for flow in heterogeneous materials.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turner, Daniel Zack

It is well known that the continuous Galerkin method (in its standard form) is not locally conservative, yet many stabilized methods are constructed by augmenting the standard Galerkin weak form. In particular, the Variational Multiscale (VMS) method has achieved popularity for combating numerical instabilities that arise for mixed formulations that do not otherwise satisfy the LBB condition. Among alternative methods that satisfy local and global conservation, many employ Raviart-Thomas function spaces. The lowest order Raviart-Thomas finite element formulation (RT0) consists of evaluating fluxes over the midpoint of element edges and constant pressures within the element. Although the RT0 element posesmore » many advantages, it has only been shown viable for triangular or tetrahedral elements (quadrilateral variants of this method do not pass the patch test). In the context of heterogenous materials, both of these methods have been used to model the mixed form of the Darcy equation. This work aims, in a comparative fashion, to evaluate the strengths and weaknesses of either approach for modeling Darcy flow for problems with highly varying material permeabilities and predominantly open flow boundary conditions. Such problems include carbon sequestration and enhanced oil recovery simulations for which the far-field boundary is typically described with some type of pressure boundary condition. We intend to show the degree to which the VMS formulation violates local mass conservation for these types of problems and compare the performance of the VMS and RT0 methods at boundaries between disparate permeabilities.« less

VMCast: A VM-Assisted Stability Enhancing Solution for Tree-Based Overlay Multicast

PubMed Central

Gu, Weidong; Zhang, Xinchang; Gong, Bin; Zhang, Wei; Wang, Lu

2015-01-01

Tree-based overlay multicast is an effective group communication method for media streaming applications. However, a group member’s departure causes all of its descendants to be disconnected from the multicast tree for some time, which results in poor performance. The above problem is difficult to be addressed because overlay multicast tree is intrinsically instable. In this paper, we proposed a novel stability enhancing solution, VMCast, for tree-based overlay multicast. This solution uses two types of on-demand cloud virtual machines (VMs), i.e., multicast VMs (MVMs) and compensation VMs (CVMs). MVMs are used to disseminate the multicast data, whereas CVMs are used to offer streaming compensation. The used VMs in the same cloud datacenter constitute a VM cluster. Each VM cluster is responsible for a service domain (VMSD), and each group member belongs to a specific VMSD. The data source delivers the multicast data to MVMs through a reliable path, and MVMs further disseminate the data to group members along domain overlay multicast trees. The above approach structurally improves the stability of the overlay multicast tree. We further utilized CVM-based streaming compensation to enhance the stability of the data distribution in the VMSDs. VMCast can be used as an extension to existing tree-based overlay multicast solutions, to provide better services for media streaming applications. We applied VMCast to two application instances (i.e., HMTP and HCcast). The results show that it can obviously enhance the stability of the data distribution. PMID:26562152

Concentrations in ambient air and emissions of cyclic volatile methylsiloxanes in Zurich, Switzerland.

PubMed

Buser, Andreas M; Kierkegaard, Amelie; Bogdal, Christian; MacLeod, Matthew; Scheringer, Martin; Hungerbühler, Konrad

2013-07-02

Tens of thousands of tonnes of cyclic volatile methylsiloxanes (cVMS) are used each year globally, which leads to high and continuous cVMS emissions to air. However, field measurements of cVMS in air and empirical information about emission rates to air are still limited. Here we present measurements of decamethylcyclopentasiloxane (D5) and dodecamethylcyclohexasiloxane (D6) in air for Zurich, Switzerland. The measurements were performed in January and February 2011 over a period of eight days and at two sites (city center and background) with a temporal resolution of 6-12 h. Concentrations of D5 and D6 are higher in the center of Zurich and range from 100 to 650 ng m(-3) and from 10 to 79 ng m(-3), respectively. These values are among the highest levels of D5 and D6 reported in the literature. In a second step, we used a multimedia environmental fate model parametrized for the region of Zurich to interpret the levels and time trends in the cVMS concentrations and to back-calculate the emission rates of D5 and D6 from the city of Zurich. The average emission rates obtained for D5 and D6 are 120 kg d(-1) and 14 kg d(-1), respectively, which corresponds to per-capita emissions of 310 mg capita(-1) d(-1) for D5 and 36 mg capita(-1) d(-1) for D6.

VMCast: A VM-Assisted Stability Enhancing Solution for Tree-Based Overlay Multicast.

PubMed

Gu, Weidong; Zhang, Xinchang; Gong, Bin; Zhang, Wei; Wang, Lu

2015-01-01

Tree-based overlay multicast is an effective group communication method for media streaming applications. However, a group member's departure causes all of its descendants to be disconnected from the multicast tree for some time, which results in poor performance. The above problem is difficult to be addressed because overlay multicast tree is intrinsically instable. In this paper, we proposed a novel stability enhancing solution, VMCast, for tree-based overlay multicast. This solution uses two types of on-demand cloud virtual machines (VMs), i.e., multicast VMs (MVMs) and compensation VMs (CVMs). MVMs are used to disseminate the multicast data, whereas CVMs are used to offer streaming compensation. The used VMs in the same cloud datacenter constitute a VM cluster. Each VM cluster is responsible for a service domain (VMSD), and each group member belongs to a specific VMSD. The data source delivers the multicast data to MVMs through a reliable path, and MVMs further disseminate the data to group members along domain overlay multicast trees. The above approach structurally improves the stability of the overlay multicast tree. We further utilized CVM-based streaming compensation to enhance the stability of the data distribution in the VMSDs. VMCast can be used as an extension to existing tree-based overlay multicast solutions, to provide better services for media streaming applications. We applied VMCast to two application instances (i.e., HMTP and HCcast). The results show that it can obviously enhance the stability of the data distribution.

Moderate-severely bothersome vasomotor symptoms are associated with lowered psychological general wellbeing in women at midlife.

PubMed

Gartoulla, Pragya; Bell, Robin J; Worsley, Roisin; Davis, Susan R

2015-08-01

The extent to which menopause influences wellbeing is unclear. We investigated the association between moderate-severely bothersome vasomotor symptoms (VMS) and psychological general wellbeing in women, aged 40-65 years, taking into account socio-demographic and lifestyle factors. This was a cross-sectional survey of 2020 Australian women, aged 40-65 years, recruited from the community between July 2013 and March 2014. Wellbeing was assessed by the Psychological and General Wellbeing questionnaire (PGWB) and VMS by the Menopause-specific Quality of Life Questionnaire. Moderate-severely bothersome VMS had a strong significant negative association with psychological general wellbeing [regression coefficient (β)=-8.17, 95% confidence interval (CI) -10.90 to -5.45]. Socio-demographic factors associated with lower wellbeing included being un-partnered (β=-2.80, 95% CI -4.74 to -0.86), obese (β=-5.46, 95% CI -7.24 to -3.68) and a smoker (β=-3.47, 95% CI -6.10 to -0.84). Older age (β=0.29, 95% CI 0.06-0.42) and participation in paid and/or volunteer work (β=2.72, 95% CI 0.61-4.82) were positively associated with wellbeing. For those with insecure housing, being a carer was associated with better wellbeing. Moderate-severely bothersome VMS are significantly and independently negatively associated with psychological general wellbeing in women at midlife. This is an important consideration when assessing psychological wellbeing in women during this life phase. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Epipelagic and mesopelagic fishes in the southern California Current System: Ecological interactions and oceanographic influences on their abundance

NASA Astrophysics Data System (ADS)

Koslow, J. Anthony; Davison, Peter; Lara-Lopez, Ana; Ohman, Mark D.

2014-10-01

We use zooplankton and ichthyoplankton data from the ~ 60-year CalCOFI time series to examine relationships of mesopelagic (i.e. midwater) fishes in the California Current System with midwater predators, potential competitors (epipelagic planktivorous fishes) and zooplankton prey, within the context of local and basin-scale oceanography. Equilibrium-based near-steady state models and the “wasp-waist” paradigm for eastern boundary currents predict tightly-coupled trophic interactions, with negative correlations between the abundance of planktivorous competitors and between dominant planktivores and their prey. Testing these hypotheses with the CalCOFI time series, we found them to be generally invalid. Potential competitors within the mesopelagic community (planktivorous vertical migrators (VMs) and non-migrators (NMs)) were highly positively correlated, as were these groups with the mesopelagic piscivores (e.g. dragonfishes) that prey on them. In addition, the abundance of VMs was mostly positively correlated with that of epipelagic planktivores, such as anchovy, mackerels and hake. The VMs and epipelagic planktivores were negatively correlated with key potential planktonic prey groups, indicating a lack of bottom-up forcing. However, neither do these negative correlations appear to signify top-down forcing, since they seem to be mediated through correlations with key environmental drivers, such as the Pacific Decadal Oscillation (PDO), sea surface temperature, and the relative strength of the California Current. We suggest that the web of correlations linking key meso- and epipelagic planktivores, their predators and prey is mediated through common links with basin-scale oceanographic drivers, such as the PDO and ENSO cycles. Thus, the abundance of mesopelagic fishes in the California Current is closely tied to variation in the oxygen minimum zone, whose dynamics have been linked to the PDO. The PDO and other drivers are also linked to the transport of the California Current System, which influences the abundance of many dominant taxa off southern California that have broad biogeographic distributions linked to water masses that extend to the north (Transition Zone/sub-Arctic faunas) or the south (tropical/subtropical faunas).

Vadose zone studies at an industrial contaminated site: the vadose zone monitoring system and cross-hole geophysics

NASA Astrophysics Data System (ADS)

Fernandez de Vera, Natalia; Beaujean, Jean; Jamin, Pierre; Nguyen, Frédéric; Dahan, Ofer; Vanclooster, Marnik; Brouyère, Serge

2014-05-01

In order to improve risk characterization and remediation measures for soil and groundwater contamination, there is a need to improve in situ vadose zone characterization. However, most available technologies have been developed in the context of agricultural soils. Such methodologies are not applicable at industrial sites, where soils and contamination differ in origin and composition. In addition, most technologies are applicable only in the first meters of soils, leaving deeper vadose zones with lack of information, in particular on field scale heterogeneity. In order to overcome such difficulties, a vadose zone experiment has been setup at a former industrial site in Belgium. Industrial activities carried out on site left a legacy of soil and groundwater contamination in BTEX, PAH, cyanide and heavy metals. The experiment comprises the combination of two techniques: the Vadose Zone Monitoring System (VMS) and cross-hole geophysics. The VMS allows continuous measurements of water content and temperature at different depths of the vadose zone. In addition, it provides the possibility of pore water sampling at different depths. The system is formed by a flexible sleeve containing monitoring units along its depth which is installed in a slanted borehole. The flexible sleeve contains three types of monitoring units in the vadose zone: Time Domain Transmissometry (TDT), which allows water content measurements; Vadose Sampling Ports (VSP), used for collecting water samples coming from the matrix; the Fracture Samplers (FS), which are used for retrieving water samples from the fractures. Cross-hole geophysics techniques consist in the injection of an electrical current using electrodes installed in vertical boreholes. From measured potential differences, detailed spatial patterns about electrical properties of the subsurface can be inferred. Such spatial patterns are related with subsurface heterogeneities, water content and solute concentrations. Two VMS were installed in two slanted boreholes on site, together with four vertical boreholes containing electrodes for geophysical measurements. Currently the site is being monitored under natural recharge conditions. Initial results show the reaction of the vadose zone to rainfall events, as well as chemical evolution of soil water with depth.

Comparison of Hybrid K-Edge Densitometer (HKED) Performance Operating with the Canberra Lynx MCA and the Canberra ICB-NIM Electronics

DOE Office of Scientific and Technical Information (OSTI.GOV)

McElroy, Robert Dennis

From the 1991 until 2008 the Canberra Hybrid K-Edge Densitometer systems were provided with ICB-NIM (Integrated Control Bus – Nuclear Instrument Module) acquisition electronics. Newer electronics modules, such as the Lynx, were not supported under the VMS based operating system. The LYNX module was provided as the standard acquisition electronics following the release of the Windows based CHKED software. This report compares the electronics dead-time, gain shifts, detector resolution and measurement performance of the HKED system operated with the two types of acquisition modules. The comparison was performed using measurements obtained with the ORNL HKED system. The original intent ofmore » this study was to take advantage of both the timing and energy outputs from the HPGE detector to acquire data with both sets of electronics in parallel. Although this approach has been applied successfully with other systems, in this case we found the timing output produced a significant amount of noise such that a comparison between the electronics would be invalid. So the comparative measurements were performed sequentially. The ICB-NIM data was acquired over the course of 12 months with 255 measurements while the LYNX data was acquired over a period of 10 months with 75 measurements. To simplify the comparison, all data used in this study was acquired using the Canberra CHKED (V1.0) software package. The performance analysis was based primarily on the peak locations, peak widths and concentration values reported by the CHKED software. The raw spectra from the XRF measurements were also examined to extract additional 109Cd peak location and width data for the hybrid measurements (the standard hybrid report template does not report these values).« less

Computer Language For Optimization Of Design

NASA Technical Reports Server (NTRS)

Scotti, Stephen J.; Lucas, Stephen H.

1991-01-01

SOL is computer language geared to solution of design problems. Includes mathematical modeling and logical capabilities of computer language like FORTRAN; also includes additional power of nonlinear mathematical programming methods at language level. SOL compiler takes SOL-language statements and generates equivalent FORTRAN code and system calls. Provides syntactic and semantic checking for recovery from errors and provides detailed reports containing cross-references to show where each variable used. Implemented on VAX/VMS computer systems. Requires VAX FORTRAN compiler to produce executable program.

Evaluating Effectiveness of Modeling Motion System Feedback in the Enhanced Hess Structural Model of the Human Operator

NASA Technical Reports Server (NTRS)

Zaychik, Kirill; Cardullo, Frank; George, Gary; Kelly, Lon C.

2009-01-01

In order to use the Hess Structural Model to predict the need for certain cueing systems, George and Cardullo significantly expanded it by adding motion feedback to the model and incorporating models of the motion system dynamics, motion cueing algorithm and a vestibular system. This paper proposes a methodology to evaluate effectiveness of these innovations by performing a comparison analysis of the model performance with and without the expanded motion feedback. The proposed methodology is composed of two stages. The first stage involves fine-tuning parameters of the original Hess structural model in order to match the actual control behavior recorded during the experiments at NASA Visual Motion Simulator (VMS) facility. The parameter tuning procedure utilizes a new automated parameter identification technique, which was developed at the Man-Machine Systems Lab at SUNY Binghamton. In the second stage of the proposed methodology, an expanded motion feedback is added to the structural model. The resulting performance of the model is then compared to that of the original one. As proposed by Hess, metrics to evaluate the performance of the models include comparison against the crossover models standards imposed on the crossover frequency and phase margin of the overall man-machine system. Preliminary results indicate the advantage of having the model of the motion system and motion cueing incorporated into the model of the human operator. It is also demonstrated that the crossover frequency and the phase margin of the expanded model are well within the limits imposed by the crossover model.

Space station integrated wall design and penetration damage control

NASA Technical Reports Server (NTRS)

Coronado, A. R.; Gibbins, M. N.; Wright, M. A.; Stern, P. H.

1987-01-01

The analysis code BUMPER executes a numerical solution to the problem of calculating the probability of no penetration (PNP) of a spacecraft subject to man-made orbital debris or meteoroid impact. The codes were developed on a DEC VAX 11/780 computer that uses the Virtual Memory System (VMS) operating system, which is written in FORTRAN 77 with no VAX extensions. To help illustrate the steps involved, a single sample analysis is performed. The example used is the space station reference configuration. The finite element model (FEM) of this configuration is relatively complex but demonstrates many BUMPER features. The computer tools and guidelines are described for constructing a FEM for the space station under consideration. The methods used to analyze the sensitivity of PNP to variations in design, are described. Ways are suggested for developing contour plots of the sensitivity study data. Additional BUMPER analysis examples are provided, including FEMs, command inputs, and data outputs. The mathematical theory used as the basis for the code is described, and illustrates the data flow within the analysis.

The LATDYN user's manual

NASA Technical Reports Server (NTRS)

Housner, J. M.; Mcgowan, P. E.; Abrahamson, A. L.; Powell, M. G.

1986-01-01

The LATDYN User's Manual presents the capabilities and instructions for the LATDYN (Large Angle Transient DYNamics) computer program. The LATDYN program is a tool for analyzing the controlled or uncontrolled dynamic transient behavior of interconnected deformable multi-body systems which can undergo large angular motions of each body relative other bodies. The program accommodates large structural deformation as well as large rigid body rotations and is applicable, but not limited to, the following areas: (1) development of large flexible space structures; (2) slewing of large space structure components; (3) mechanisms with rigid or elastic components; and (4) robotic manipulations of beam members. Presently the program is limited to two dimensional problems, but in many cases, three dimensional problems can be exactly or approximately reduced to two dimensions. The program uses convected finite elements to affect the large angular motions involved in the analysis. General geometry is permitted. Detailed user input and output specifications are provided and discussed with example runstreams. To date, LATDYN has been configured for CDC/NOS and DEC VAX/VMS machines. All coding is in ANSII-77 FORTRAN. Detailed instructions regarding interfaces with particular computer operating systems and file structures are provided.

A Parameter-Free Dynamic Alternative to Hyper-Viscosity for Coupled Transport Equations: Application to the Simulation of 3D Squall Lines Using Spectral Elements

DTIC Science & Technology

2015-06-04

that involve physics coupling with phase change in the simulation of 3D deep convection. We show that the VMS+DC approach is a robust technique that can...of 3D deep convection. We show that the VMS+DC approach is a robust technique that can damp the high order modes characterizing the spectral element...of Spectral Elements, Deep Convection, Kessler Microphysics Preprint J. Comput. Phys. 283 (2015) 360-373 June 4, 2015 1. Introduction In the field of

NASTRAN migration to UNIX

NASA Technical Reports Server (NTRS)

Chan, Gordon C.; Turner, Horace Q.

1990-01-01

COSMIC/NASTRAN, as it is supported and maintained by COSMIC, runs on four main-frame computers - CDC, VAX, IBM and UNIVAC. COSMIC/NASTRAN on other computers, such as CRAY, AMDAHL, PRIME, CONVEX, etc., is available commercially from a number of third party organizations. All these computers, with their own one-of-a-kind operating systems, make NASTRAN machine dependent. The job control language (JCL), the file management, and the program execution procedure of these computers are vastly different, although 95 percent of NASTRAN source code was written in standard ANSI FORTRAN 77. The advantage of the UNIX operating system is that it has no machine boundary. UNIX is becoming widely used in many workstations, mini's, super-PC's, and even some main-frame computers. NASTRAN for the UNIX operating system is definitely the way to go in the future, and makes NASTRAN available to a host of computers, big and small. Since 1985, many NASTRAN improvements and enhancements were made to conform to the ANSI FORTRAN 77 standards. A major UNIX migration effort was incorporated into COSMIC NASTRAN 1990 release. As a pioneer work for the UNIX environment, a version of COSMIC 89 NASTRAN was officially released in October 1989 for DEC ULTRIX VAXstation 3100 (with VMS extensions). A COSMIC 90 NASTRAN version for DEC ULTRIX DECstation 3100 (with RISC) is planned for April 1990 release. Both workstations are UNIX based computers. The COSMIC 90 NASTRAN will be made available on a TK50 tape for the DEC ULTRIX workstations. Previously in 1988, an 88 NASTRAN version was tested successfully on a SiliconGraphics workstation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, Hao; Ren, Shangping; Garzoglio, Gabriele

Cloud bursting is one of the key research topics in the cloud computing communities. A well designed cloud bursting module enables private clouds to automatically launch virtual machines (VMs) to public clouds when more resources are needed. One of the main challenges in developing a cloud bursting module is to decide when and where to launch a VM so that all resources are most effectively and efficiently utilized and the system performance is optimized. However, based on system operational data obtained from FermiCloud, a private cloud developed by the Fermi National Accelerator Laboratory for scientific workflows, the VM launching overheadmore » is not a constant. It varies with physical resource utilization, such as CPU and I/O device utilizations, at the time when a VM is launched. Hence, to make judicious decisions as to when and where a VM should be launched, a VM launching overhead reference model is needed. In this paper, we first develop a VM launching overhead reference model based on operational data we have obtained on FermiCloud. Second, we apply the developed reference model on FermiCloud and compare calculated VM launching overhead values based on the model with measured overhead values on FermiCloud. Our empirical results on FermiCloud indicate that the developed reference model is accurate. We believe, with the guidance of the developed reference model, efficient resource allocation algorithms can be developed for cloud bursting process to minimize the operational cost and resource waste.« less

The VLT-FLAMES Tarantula Survey. XVII. Physical and wind properties of massive stars at the top of the main sequence

NASA Astrophysics Data System (ADS)

Bestenlehner, J. M.; Gräfener, G.; Vink, J. S.; Najarro, F.; de Koter, A.; Sana, H.; Evans, C. J.; Crowther, P. A.; Hénault-Brunet, V.; Herrero, A.; Langer, N.; Schneider, F. R. N.; Simón-Díaz, S.; Taylor, W. D.; Walborn, N. R.

2014-10-01

The evolution and fate of very massive stars (VMS) is tightly connected to their mass-loss properties. Their initial and final masses differ significantly as a result of mass loss. VMS have strong stellar winds and extremely high ionising fluxes, which are thought to be critical sources of both mechanical and radiative feedback in giant H ii regions. However, how VMS mass-loss properties change during stellar evolution is poorly understood. In the framework of the VLT-Flames Tarantula Survey (VFTS), we explore the mass-loss transition region from optically thin O star winds to denser WNh Wolf-Rayet star winds, thereby testing theoretical predictions. To this purpose we select 62 O, Of, Of/WN, and WNh stars, an unprecedented sample of stars with the highest masses and luminosities known. We perform a spectral analysis of optical VFTS as well as near-infrared VLT/SINFONI data using the non-LTE radiative transfer code CMFGEN to obtain both stellar and wind parameters. For the first time, we observationally resolve the transition between optically thin O star winds and optically thick hydrogen-rich WNh Wolf-Rayet winds. Our results suggest the existence of a "kink" between both mass-loss regimes, in agreement with recent Monte Carlo simulations. For the optically thick regime, we confirm the steep dependence on the classical Eddington factor Γe from previous theoretical and observational studies. The transition occurs on the main sequence near a luminosity of 106.1L⊙, or a mass of 80 ... 90 M⊙. Above this limit, we find that - even when accounting for moderate wind clumping (with fv = 0.1) - wind mass-loss rates are enhanced with respect to standard prescriptions currently adopted in stellar evolution calculations. We also show that this results in substantial helium surface enrichment. Finally, based on our spectroscopic analyses, we are able to provide the most accurate ionising fluxes for VMS known to date, confirming the pivotal role of VMS in ionising and shaping their environments. Appendices are available in electronic form at http://www.aanda.org

Large-scale high density 3D AMT for mineral exploration — A case history from volcanic massive sulfide Pb-Zn deposit with 2000 AMT sites

NASA Astrophysics Data System (ADS)

Chen, R.; Chen, S.; He, L.; Yao, H.; Li, H.; Xi, X.; Zhao, X.

2017-12-01

EM method plays a key role in volcanic massive sulfide (VMS) deposit which is with high grade and high economic value. However, the performance of high density 3D AMT in detecting deep concealed VMS targets is not clear. The size of a typical VMS target is less than 100 m x 100 m x 50 m, it's a challenge task to find it with large depth. We carried a test in a VMS Pb-Zn deposit using high density 3D AMT with site spacing as 20 m and profile spacing as 40 - 80 m. About 2000 AMT sites were acquired in an area as 2000 m x 1500 m. Then we used a sever with 8 CPUs (Intel Xeon E7-8880 v3, 2.3 GHz, 144 cores), 2048 GB RAM, and 40 TB disk array to invert above 3D AMT sites using integral equation forward modeling and re-weighted conjugated-gradient inversion. The depth of VMS ore body is about 600 m and the size of the ore body is about 100 x 100 x 20m with dip angle about 45 degree. We finds that it's very hard to recover the location and shape of the ore body by 3D AMT inversion even using the data of all AMT sites and frequencies. However, it's possible to recover the location and shape of the deep concealed ore body if we adjust the inversion parameters carefully. A new set of inversion parameter needs to be find for high density 3D AMT data set and the inversion parameters working good for Dublin Secret Model II (DSM 2) is not suitable for our real data. This problem may be caused by different data density and different number of frequency. We find a set of good inversion parameter by comparing the shape and location of ore body with inversion result and trying different inversion parameters. And the application of new inversion parameter in nearby area with high density AMT sites shows that the inversion result is improved greatly.

Space-time VMS computation of wind-turbine rotor and tower aerodynamics

NASA Astrophysics Data System (ADS)

Takizawa, Kenji; Tezduyar, Tayfun E.; McIntyre, Spenser; Kostov, Nikolay; Kolesar, Ryan; Habluetzel, Casey

2014-01-01

We present the space-time variational multiscale (ST-VMS) computation of wind-turbine rotor and tower aerodynamics. The rotor geometry is that of the NREL 5MW offshore baseline wind turbine. We compute with a given wind speed and a specified rotor speed. The computation is challenging because of the large Reynolds numbers and rotating turbulent flows, and computing the correct torque requires an accurate and meticulous numerical approach. The presence of the tower increases the computational challenge because of the fast, rotational relative motion between the rotor and tower. The ST-VMS method is the residual-based VMS version of the Deforming-Spatial-Domain/Stabilized ST (DSD/SST) method, and is also called "DSD/SST-VMST" method (i.e., the version with the VMS turbulence model). In calculating the stabilization parameters embedded in the method, we are using a new element length definition for the diffusion-dominated limit. The DSD/SST method, which was introduced as a general-purpose moving-mesh method for computation of flows with moving interfaces, requires a mesh update method. Mesh update typically consists of moving the mesh for as long as possible and remeshing as needed. In the computations reported here, NURBS basis functions are used for the temporal representation of the rotor motion, enabling us to represent the circular paths associated with that motion exactly and specify a constant angular velocity corresponding to the invariant speeds along those paths. In addition, temporal NURBS basis functions are used in representation of the motion and deformation of the volume meshes computed and also in remeshing. We name this "ST/NURBS Mesh Update Method (STNMUM)." The STNMUM increases computational efficiency in terms of computer time and storage, and computational flexibility in terms of being able to change the time-step size of the computation. We use layers of thin elements near the blade surfaces, which undergo rigid-body motion with the rotor. We compare the results from computations with and without tower, and we also compare using NURBS and linear finite element basis functions in temporal representation of the mesh motion.

Space-Time VMS Computation of Wind-Turbine Rotor and Tower Aerodynamics

NASA Astrophysics Data System (ADS)

McIntyre, Spenser W.

This thesis is on the space{time variational multiscale (ST-VMS) computation of wind-turbine rotor and tower aerodynamics. The rotor geometry is that of the NREL 5MW offshore baseline wind turbine. We compute with a given wind speed and a specified rotor speed. The computation is challenging because of the large Reynolds numbers and rotating turbulent ows, and computing the correct torque requires an accurate and meticulous numerical approach. The presence of the tower increases the computational challenge because of the fast, rotational relative motion between the rotor and tower. The ST-VMS method is the residual-based VMS version of the Deforming-Spatial-Domain/Stabilized ST (DSD/SST) method, and is also called "DSD/SST-VMST" method (i.e., the version with the VMS turbulence model). In calculating the stabilization parameters embedded in the method, we are using a new element length definition for the diffusion-dominated limit. The DSD/SST method, which was introduced as a general-purpose moving-mesh method for computation of ows with moving interfaces, requires a mesh update method. Mesh update typically consists of moving the mesh for as long as possible and remeshing as needed. In the computations reported here, NURBS basis functions are used for the temporal representation of the rotor motion, enabling us to represent the circular paths associated with that motion exactly and specify a constant angular velocity corresponding to the invariant speeds along those paths. In addition, temporal NURBS basis functions are used in representation of the motion and deformation of the volume meshes computed and also in remeshing. We name this "ST/NURBS Mesh Update Method (STNMUM)." The STNMUM increases computational efficiency in terms of computer time and storage, and computational exibility in terms of being able to change the time-step size of the computation. We use layers of thin elements near the blade surfaces, which undergo rigid-body motion with the rotor. We compare the results from computations with and without tower, and we also compare using NURBS and linear finite element basis functions in temporal representation of the mesh motion.

New Abstractions for Mobile Connectivity and Resource Management

DTIC Science & Technology

2016-05-01

networked systems, con- sisting of replicated backend services and mobile , multi-homed clients. We derive a state machine for ECCP supporting migration...makes ECCP useful not only for mobility of client devices, but also for backend services which are increasingly run in VMs or containers on platforms...layers of the network stack, instead of the traditional IP/port, improve mobility for clients and backend services and reduce unnecessary coupling of

Source Code Analysis Laboratory (SCALe)

DTIC Science & Technology

2012-04-01

Versus Flagged Nonconformities (FNC) Software System TP/FNC Ratio Mozilla Firefox version 2.0 6/12 50% Linux kernel version 2.6.15 10/126 8...is inappropriately tuned for analysis of the Linux kernel, which has anomalous results. Customizing SCALe to work with software for a particular...servers support a collection of virtual machines (VMs) that can be configured to support analysis in various environments, such as Windows XP and Linux . A

Load Balancing in Cloud Computing Environment Using Improved Weighted Round Robin Algorithm for Nonpreemptive Dependent Tasks.

PubMed

Devi, D Chitra; Uthariaraj, V Rhymend

2016-01-01

Cloud computing uses the concepts of scheduling and load balancing to migrate tasks to underutilized VMs for effectively sharing the resources. The scheduling of the nonpreemptive tasks in the cloud computing environment is an irrecoverable restraint and hence it has to be assigned to the most appropriate VMs at the initial placement itself. Practically, the arrived jobs consist of multiple interdependent tasks and they may execute the independent tasks in multiple VMs or in the same VM's multiple cores. Also, the jobs arrive during the run time of the server in varying random intervals under various load conditions. The participating heterogeneous resources are managed by allocating the tasks to appropriate resources by static or dynamic scheduling to make the cloud computing more efficient and thus it improves the user satisfaction. Objective of this work is to introduce and evaluate the proposed scheduling and load balancing algorithm by considering the capabilities of each virtual machine (VM), the task length of each requested job, and the interdependency of multiple tasks. Performance of the proposed algorithm is studied by comparing with the existing methods.

Load Balancing in Cloud Computing Environment Using Improved Weighted Round Robin Algorithm for Nonpreemptive Dependent Tasks

PubMed Central

Devi, D. Chitra; Uthariaraj, V. Rhymend

2016-01-01

Cloud computing uses the concepts of scheduling and load balancing to migrate tasks to underutilized VMs for effectively sharing the resources. The scheduling of the nonpreemptive tasks in the cloud computing environment is an irrecoverable restraint and hence it has to be assigned to the most appropriate VMs at the initial placement itself. Practically, the arrived jobs consist of multiple interdependent tasks and they may execute the independent tasks in multiple VMs or in the same VM's multiple cores. Also, the jobs arrive during the run time of the server in varying random intervals under various load conditions. The participating heterogeneous resources are managed by allocating the tasks to appropriate resources by static or dynamic scheduling to make the cloud computing more efficient and thus it improves the user satisfaction. Objective of this work is to introduce and evaluate the proposed scheduling and load balancing algorithm by considering the capabilities of each virtual machine (VM), the task length of each requested job, and the interdependency of multiple tasks. Performance of the proposed algorithm is studied by comparing with the existing methods. PMID:26955656

Archean Pb Isotope Evolution: Implications for the Early Earth.

NASA Astrophysics Data System (ADS)

Vervoort, J. D.; Thorpe, R.; Albarede, F.; Blichert-Toft, J.

2008-12-01

The U-Pb isotope system provides us with a powerful tool for understanding the chemical evolution of the Earth. Pb isotopes in Archean rocks, however, have not been widely utilized because U mobility makes initial Pb isotope ratios from old silicate rocks difficult, if not impossible, to determine. Galenas in syngenetic volcanogenic massive sulfide (VMS) deposits, however, provide snapshots of initial Pb ratios because their Pb isotopic composition is time invariant at their formation (U/Pb=0). The Pb isotopic record from galenas from rocks of all age have been utilized for over 70 years to answer a wide range of scientific problems beginning with Al Nier's pioneering work analyzing Pb isotopes in the 1930's but are no longer widely used by the isotopic community because they have been produced by older TIMS techniques. We have begun a re-examination of Archean Pb by an extensive analysis of over 100 galena samples from Archean VMS deposits throughout the Superior and Slave Provinces in Canada as well as from other VMS deposits in Finland, South Africa and Western Australia. The goal of this work is to provide modern, high precision measurements and update an old, but venerable, Pb isotopic data set. We feel these data provide important constraints on not only the Pb isotopic evolution of the Earth, but planetary differentiation and recycling processes operating in the first 2 b.y. of Earth's history. Our analytical techniques include dissolving the Pb sulfide minerals, purifying them with ion chromatography, and analyzing them using MC-ICPMS at both Washington State University (Neptune) and Ecole Normale Superieure in Lyon, France (Nu). All Pb solutions are doped with Tl in order to correct for mass fractionation. In this abstract we report preliminary galena Pb isotope data from 6 VMS deposits in the Abitibi greenstone belt: Chibougamu, Matagami, Noranda, Normetal, Timmins, and Val d"Or. These deposits are all approximately 2.7 Ga in age but in detail vary from 2.728 Ga (Normetal) to 2.70 Ga (Noranda). The Pb isotopic compositions from these galenas, when normalized to a common age of 2.7 Ga, define a highly linear array in 207Pb/204Pb vs. 206Pb/204Pb. This array is nearly coincident with the 2.7 Ga geochron with a slope that corresponds to an age of ~4.4 Ga and with an extraordinary large range of 207Pb/204Pb, about the same magnitude as modern MORB. These data have important implications for the evolution of the Archean mantle. First, the slope of the Abitibi Pb-Pb array and its coincidence with the 2.7 Ga geochron suggests widespread U-Pb differentiation within the first hundred million years of Earth's history. This may have been due to either core formation or silicate/melt differentiation due to widespread melting of the mantle (e.g., formation of a magma ocean). Second, variations in μ in the Abitibi mantle and the subsequent Pb isotopic heterogeneities, whatever their cause, have not been significantly changed from 4.4 until 2.7 Ga. This implies that changes in μ in the Abitibi mantle source between 4.4 and 2.7 Ga, such as would be caused by crust extraction or recycling of older crust into this region of the mantle, were insufficient to destroy the original μ variations created at 4.4 Ga. Therefore, it appears that this portion of the mantle had essentially remained isolated and undisturbed from the early Hadean until the late Archean.

Ada Compiler Validation Summary Report: Certificate Number: 920509S1. 11259 Alenia Aeritalia and Selenia S.p.A DACS VAX/VMS to 80x86 PM MARA Ada Cross Compiler, Version 4.6 Microvax 4000/200 = MARA

DTIC Science & Technology

1992-01-01

area end basic io types; 11.3.3 TEXT 10 -- Date 31 October 1983 -- Programmer Soeren Prehn (, Knud Joergen Kirkegaard) -- Project Portable Ada...Programmer Peter Haff (, Soeren Prehn , Knud Joergen Kirkegaard) -- Project Portable Ada Programming System -- Module SEQIOS.ADA -- Description...Peter Haff (,Soeren Prehn , Knud Joergen Kirkegaard) -- Project Portable Ada Programming System -- Module DIR IO.ADA -- Description Specification of

Liberating Virtual Machines from Physical Boundaries through Execution Knowledge

DTIC Science & Technology

2015-12-01

trivial infrastructures such as VM distribution networks, clients need to wait for an extended period of time before launching a VM. In cloud settings...hardware support. MobiDesk [28] efficiently supports virtual desktops in mobile environments by decou- pling the user’s workload from host systems and...experiment set-up. VMs are migrated between a pair of source and destination hosts, which are connected through a backend 10 Gbps network for

ASSIST - THE ABSTRACT SEMI-MARKOV SPECIFICATION INTERFACE TO THE SURE TOOL PROGRAM (SUN VERSION)

NASA Technical Reports Server (NTRS)

Johnson, S. C.

1994-01-01

ASSIST, the Abstract Semi-Markov Specification Interface to the SURE Tool program, is an interface that will enable reliability engineers to accurately design large semi-Markov models. The user describes the failure behavior of a fault-tolerant computer system in an abstract, high-level language. The ASSIST program then automatically generates a corresponding semi-Markov model. The abstract language allows efficient description of large, complex systems; a one-page ASSIST-language description may result in a semi-Markov model with thousands of states and transitions. The ASSIST program also includes model-reduction techniques to facilitate efficient modeling of large systems. Instead of listing the individual states of the Markov model, reliability engineers can specify the rules governing the behavior of a system, and these are used to automatically generate the model. ASSIST reads an input file describing the failure behavior of a system in an abstract language and generates a Markov model in the format needed for input to SURE, the semi-Markov Unreliability Range Evaluator program, and PAWS/STEM, the Pade Approximation with Scaling program and Scaled Taylor Exponential Matrix. A Markov model consists of a number of system states and transitions between them. Each state in the model represents a possible state of the system in terms of which components have failed, which ones have been removed, etc. Within ASSIST, each state is defined by a state vector, where each element of the vector takes on an integer value within a defined range. An element can represent any meaningful characteristic, such as the number of working components of one type in the system, or the number of faulty components of another type in use. Statements representing transitions between states in the model have three parts: a condition expression, a destination expression, and a rate expression. The first expression is a Boolean expression describing the state space variable values of states for which the transition is valid. The second expression defines the destination state for the transition in terms of state space variable values. The third expression defines the distribution of elapsed time for the transition. The mathematical approach chosen to solve a reliability problem may vary with the size and nature of the problem. Although different solution techniques are utilized on different programs, it is possible to have a common input language. The Systems Validation Methods group at NASA Langley Research Center has created a set of programs that form the basis for a reliability analysis workstation. The set of programs are: SURE reliability analysis program (COSMIC program LAR-13789, LAR-14921); the ASSIST specification interface program (LAR-14193, LAR-14923), PAWS/STEM reliability analysis programs (LAR-14165, LAR-14920); and the FTC fault tree tool (LAR-14586, LAR-14922). FTC is used to calculate the top-event probability for a fault tree. PAWS/STEM and SURE are programs which interpret the same SURE language, but utilize different solution methods. ASSIST is a preprocessor that generates SURE language from a more abstract definition. SURE, ASSIST, and PAWS/STEM are also offered as a bundle. Please see the abstract for COS-10039/COS-10041, SARA - SURE/ASSIST Reliability Analysis Workstation, for pricing details. ASSIST was originally developed for DEC VAX series computers running VMS and was later ported for use on Sun computers running SunOS. The VMS version (LAR14193) is written in C-language and can be compiled with the VAX C compiler. The standard distribution medium for the VMS version of ASSIST is a 9-track 1600 BPI magnetic tape in VMSINSTAL format. It is also available on a TK50 tape cartridge in VMSINSTAL format. Executables are included. The Sun version (LAR14923) is written in ANSI C-language. An ANSI compliant C compiler is required in order to compile this package. The standard distribution medium for the Sun version of ASSIST is a .25 inch streaming magnetic tape cartridge in UNIX tar format. Both Sun3 and Sun4 executables are included. Electronic copies of the documentation in PostScript, TeX, and DVI formats are provided on the distribution medium. (The VMS distribution lacks the .DVI format files, however.) ASSIST was developed in 1986 and last updated in 1992. DEC, VAX, VMS, and TK50 are trademarks of Digital Equipment Corporation. SunOS, Sun3, and Sun4 are trademarks of Sun Microsystems, Inc. UNIX is a registered trademark of AT&T Bell Laboratories.

SARA - SURE/ASSIST RELIABILITY ANALYSIS WORKSTATION (UNIX VERSION)

NASA Technical Reports Server (NTRS)

Butler, R. W.

1994-01-01

SARA, the SURE/ASSIST Reliability Analysis Workstation, is a bundle of programs used to solve reliability problems. The mathematical approach chosen to solve a reliability problem may vary with the size and nature of the problem. The Systems Validation Methods group at NASA Langley Research Center has created a set of four software packages that form the basis for a reliability analysis workstation, including three for use in analyzing reconfigurable, fault-tolerant systems and one for analyzing non-reconfigurable systems. The SARA bundle includes the three for reconfigurable, fault-tolerant systems: SURE reliability analysis program (COSMIC program LAR-13789, LAR-14921); the ASSIST specification interface program (LAR-14193, LAR-14923), and PAWS/STEM reliability analysis programs (LAR-14165, LAR-14920). As indicated by the program numbers in parentheses, each of these three packages is also available separately in two machine versions. The fourth package, which is only available separately, is FTC, the Fault Tree Compiler (LAR-14586, LAR-14922). FTC is used to calculate the top-event probability for a fault tree which describes a non-reconfigurable system. PAWS/STEM and SURE are analysis programs which utilize different solution methods, but have a common input language, the SURE language. ASSIST is a preprocessor that generates SURE language from a more abstract definition. ASSIST, SURE, and PAWS/STEM are described briefly in the following paragraphs. For additional details about the individual packages, including pricing, please refer to their respective abstracts. ASSIST, the Abstract Semi-Markov Specification Interface to the SURE Tool program, allows a reliability engineer to describe the failure behavior of a fault-tolerant computer system in an abstract, high-level language. The ASSIST program then automatically generates a corresponding semi-Markov model. A one-page ASSIST-language description may result in a semi-Markov model with thousands of states and transitions. The ASSIST program also includes model-reduction techniques to facilitate efficient modeling of large systems. The semi-Markov model generated by ASSIST is in the format needed for input to SURE and PAWS/STEM. The Semi-Markov Unreliability Range Evaluator, SURE, is an analysis tool for reconfigurable, fault-tolerant systems. SURE provides an efficient means for calculating accurate upper and lower bounds for the death state probabilities for a large class of semi-Markov models, not just those which can be reduced to critical-pair architectures. The calculated bounds are close enough (usually within 5 percent of each other) for use in reliability studies of ultra-reliable computer systems. The SURE bounding theorems have algebraic solutions and are consequently computationally efficient even for large and complex systems. SURE can optionally regard a specified parameter as a variable over a range of values, enabling an automatic sensitivity analysis. SURE output is tabular. The PAWS/STEM package includes two programs for the creation and evaluation of pure Markov models describing the behavior of fault-tolerant reconfigurable computer systems: the Pade Approximation with Scaling (PAWS) and Scaled Taylor Exponential Matrix (STEM) programs. PAWS and STEM produce exact solutions for the probability of system failure and provide a conservative estimate of the number of significant digits in the solution. Markov models of fault-tolerant architectures inevitably lead to numerically stiff differential equations. Both PAWS and STEM have the capability to solve numerically stiff models. These complementary programs use separate methods to determine the matrix exponential in the solution of the model's system of differential equations. In general, PAWS is better suited to evaluate small and dense models. STEM operates at lower precision, but works faster than PAWS for larger models. The programs that comprise the SARA package were originally developed for use on DEC VAX series computers running VMS and were later ported for use on Sun series computers running SunOS. They are written in C-language, Pascal, and FORTRAN 77. An ANSI compliant C compiler is required in order to compile the C portion of the Sun version source code. The Pascal and FORTRAN code can be compiled on Sun computers using Sun Pascal and Sun Fortran. For the VMS version, VAX C, VAX PASCAL, and VAX FORTRAN can be used to recompile the source code. The standard distribution medium for the VMS version of SARA (COS-10041) is a 9-track 1600 BPI magnetic tape in VMSINSTAL format. It is also available on a TK50 tape cartridge in VMSINSTAL format. Executables are included. The standard distribution medium for the Sun version of SARA (COS-10039) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. Both Sun3 and Sun4 executables are included. Electronic copies of the ASSIST user's manual in TeX and PostScript formats are provided on the distribution medium. DEC, VAX, VMS, and TK50 are registered trademarks of Digital Equipment Corporation. Sun, Sun3, Sun4, and SunOS are trademarks of Sun Microsystems, Inc. TeX is a trademark of the American Mathematical Society. PostScript is a registered trademark of Adobe Systems Incorporated.

Menopausal Quality of Life: A RCT of Yoga, Exercise and Omega-3 Supplements

PubMed Central

REED, Susan D; GUTHRIE, Katherine A; NEWTON, Katherine M; ANDERSON, Garnet L; BOOTH-LAFORCE, Cathryn; CAAN, Bette; CARPENTER, Janet S; COHEN, Lee S; DUNN, Andrea L; ENSRUD, Kristine E; FREEMAN, Ellen W; HUNT, Julie R; JOFFE, Hadine; LARSON, Joseph C; LEARMAN, Lee A; ROTHENBERG, Robin; SEGUIN, Rebecca A; SHERMAN, Karen J; STERNFELD, Barbara S; LACROIX, Andrea Z

2014-01-01

Objective Determine efficacy of three non-hormonal therapies for improving menopause-related quality of life (QOL) in women with vasomotor symptoms (VMS). Methods 12-week 3×2 randomized, controlled, factorial design trial. Peri- and postmenopausal women, ages 40-62 years, were randomized to yoga (n=107), exercise (n=106), or usual activity (n=142), and also randomized to double-blind comparison of omega-3 (n=177) or placebo (n=178) capsules. Interventions: 1) weekly 90-minute yoga classes with daily at-home practice; 2) individualized facility-based aerobic exercise training 3 times/week; and 3) 0.615 gram omega-3 supplement, 3 times/day. Outcomes: Menopausal Quality of Life Questionnaire (MENQOL) total and domain (VMS, psychosocial, physical and sexual) scores. Results Among 355 randomized women, average age 54.7 years, 338 (95%) completed 12-week assessments. Mean baseline VMS frequency was 7.6/day and mean baseline total MENQOL score was 3.8 (range 1-8 from better to worse) with no between-group differences. For yoga compared to usual activity, baseline to 12-week improvements were seen for MENQOL total -0.3 (95% CI -0.6 to 0.0, p=0.02), and VMS (p=0.02) and sexuality (p=0.03) domain scores. For exercise and omega-3 compared to controls, improvements in baseline to 12-week total MENQOL scores were not observed. Exercise showed benefit in the MENQOL physical domain score at 12-weeks (p=0.02). Conclusion All women become menopausal and many seek medical advice on ways to improve quality of life; little evidence-based information exists. We found, among healthy sedentary menopausal women, yoga appears to improve menopausal QOL - the clinical significance of our finding is uncertain due to modest effect. PMID:24215858

Sleep and menopause: a narrative review.

PubMed

Shaver, Joan L; Woods, Nancy F

2015-08-01

Our overall aim-through a narrative review-is to critically profile key extant evidence of menopause-related sleep, mostly from studies published in the last decade. We searched the database PubMed using selected Medical Subject Headings for sleep and menopause (n = 588 articles). Using similar headings, we also searched the Cochrane Library (n = 1), Embase (n = 449), Cumulative Index to Nursing and Allied Health Literature (n = 163), Web of Science (n = 506), and PsycINFO (n = 58). Articles deemed most related to the purpose were reviewed. Results were articulated with interpretive comments according to evidence of sleep quality (self-reported) and sleep patterns (polysomnography and actigraphy) impact as related to reproductive aging and in the context of vasomotor symptoms (VMS; self-reported), vasomotor activity (VMA) events (recorded skin conductance), depressed mood, and ovarian hormones. Predominantly, the menopausal transition conveys poor sleep beyond anticipated age effects. Perceptions of sleep are not necessarily translatable from detectable physical sleep changes and are probably affected by an emotional overlay on symptoms reporting. Sleep quality and pattern changes are mostly manifest in wakefulness indicators, but sleep pattern changes are not striking. Likely contributing are VMS of sufficient frequency/severity and bothersomeness, probably with a sweating component. VMA events influence physical sleep fragmentation but not necessarily extensive sleep loss or sleep architecture changes. Lack of robust connections between perceived and recorded sleep (and VMA) could be influenced by inadequate detection. There is a need for studies of women in well-defined menopausal transition stages who have no sleep problems, accounting for sleep-related disorders, mood, and other symptoms, with attention to VMS dimensions, distribution of VMS during night and day, and advanced measurement of symptoms and physiologic manifestations.

Relationship between changes in vasomotor symptoms and changes in menopause-specific quality of life and sleep parameters.

PubMed

Pinkerton, JoAnn V; Abraham, Lucy; Bushmakin, Andrew G; Cappelleri, Joseph C; Komm, Barry S

2016-10-01

This study characterizes and quantifies the relationship of vasomotor symptoms (VMS) of menopause with menopause-specific quality of life (MSQOL) and sleep parameters to help predict treatment outcomes and inform treatment decision-making. Data were derived from a 12-week randomized, double-blind, placebo-controlled phase 3 trial that evaluated effects of two doses of conjugated estrogens/bazedoxifene on VMS in nonhysterectomized postmenopausal women (N = 318, mean age = 53.39) experiencing at least seven moderate to severe hot flushes (HFs) per day or at least 50 per week. Repeated measures models were used to determine relationships between HF frequency and severity and outcomes on the Menopause-Specific Quality of Life questionnaire and the Medical Outcomes Study sleep scale. Sensitivity analyses were performed to check assumptions of linearity between VMS and outcomes. Frequency and severity of HFs showed approximately linear relationships with MSQOL and sleep parameters. Sensitivity analyses supported assumptions of linearity. The largest changes associated with a reduction of five HFs and a 0.5-point decrease in severity occurred in the Menopause-Specific Quality of Life vasomotor functioning domain (0.78 for number of HFs and 0.98 for severity) and the Medical Outcomes Study sleep disturbance (7.38 and 4.86) and sleep adequacy (-5.60 and -4.66) domains and the two overall sleep problems indices (SPI: 5.17 and 3.63; SPII: 5.82 and 3.83). Frequency and severity of HFs have an approximately linear relationship with MSQOL and sleep parameters-that is, improvements in HFs are associated with improvements in MSQOL and sleep. Such relationships may enable clinicians to predict changes in sleep and MSQOL expected from various VMS treatments.

Time-resolved magnetic resonance angiography (MRA) at 3.0 Tesla for evaluation of hemodynamic characteristics of vascular malformations: description of distinct subgroups.

PubMed

Hammer, Simone; Uller, Wibke; Manger, Florentine; Fellner, Claudia; Zeman, Florian; Wohlgemuth, Walter A

2017-01-01

Quantitative evaluation of hemodynamic characteristics of arteriovenous and venous malformations using time-resolved magnetic resonance angiography (MRA) at 3.0 Tesla. Time-resolved MRA with interleaved stochastic trajectories (TWIST) at 3.0 Tesla was studied in 83 consecutive patients with venous malformations (VM) and arteriovenous malformations (AVM). Enhancement characteristics were calculated as percentage increase of signal intensity above baseline over time. Maximum percentage signal intensity increase (signal max ), time intervals between onset of arterial enhancement and lesion enhancement (t onset ), and time intervals between beginning of lesion enhancement and maximum percentage of lesion enhancement (t max ) were analyzed. All AVMs showed a high-flow hemodynamic pattern. Two significantly different (p < 0.001) types of venous malformations emerged: VMs with arteriovenous fistulas (AVF) (median signal max 737 %, IQR [interquartile range] = 511 - 1182 %; median t onset 5 s, IQR = 5 - 10 s; median t max 35 s, IQR = 26 - 40 s) and without AVFs (median signal max 284 %, IQR = 177-432 %; median t onset 23 s, IQR = 15 - 30 s; median t max 60 s, IQR = 55 - 75 s). Quantitative evaluation of time-resolved MRA at 3.0 Tesla provides hemodynamic characterization of vascular malformations. VMs can be subclassified into two hemodynamic subgroups due to presence or absence of AVFs. • Time-resolved MRA at 3.0 Tesla provides quantitative hemodynamic characterization of vascular malformations. • Malformations significantly differ in time courses of enhancement and signal intensity increase. • AVMs show a distinctive high-flow hemodynamic pattern. • Two significantly different types of VMs emerged: VMs with and without AVFs.

A Comprehensive Method To Quantify Adaptations by Male and Female Mice With Hot Flashes Induced by the Neurokinin B Receptor Agonist Senktide.

PubMed

Krull, Ashley A; Larsen, Sarah A; Clifton, Donald K; Neal-Perry, Genevieve; Steiner, Robert A

2017-10-01

Vasomotor symptoms (VMS; or hot flashes) plague millions of reproductive-aged men and women who have natural or iatrogenic loss of sex steroid production. Many affected individuals are left without treatment options because of contraindications to hormone replacement therapy and the lack of equally effective nonhormonal alternatives. Moreover, development of safer, more effective therapies has been stymied by the lack of an animal model that recapitulates the hot-flash phenomenon and enables direct testing of hypotheses regarding the pathophysiology underlying hot flashes. To address these problems, we developed a murine model for hot flashes and a comprehensive method for measuring autonomic and behavioral thermoregulation in mice. We designed and constructed an instrument called a thermocline that produces a thermal gradient along which mice behaviorally adapt to a thermal challenge to their core body temperature set point while their thermal preference over time is tracked and recorded. We tested and validated this murine model for VMS by administration of a TRPV1 agonist and a neurokinin B receptor agonist, capsaicin and senktide, respectively, to unrestrained mice and observed their autonomic and behavioral responses. Following both treatments, the mice exhibited a VMS-like response characterized by a drop in core body temperature and cold-seeking behavior on the thermocline. Senktide also caused a rise in tail skin temperature and increased Fos expression in the median preoptic area, a hypothalamic temperature control center. This dynamic model may be used to fully explore the cellular and molecular bases for VMS and to develop and test new therapeutic options. Copyright © 2017 Endocrine Society.

Making tomorrow's mistakes today: Evolutionary prototyping for risk reduction and shorter development time

NASA Astrophysics Data System (ADS)

Friedman, Gary; Schwuttke, Ursula M.; Burliegh, Scott; Chow, Sanguan; Parlier, Randy; Lee, Lorrine; Castro, Henry; Gersbach, Jim

1993-03-01

In the early days of JPL's solar system exploration, each spacecraft mission required its own dedicated data system with all software applications written in the mainframe's native assembly language. Although these early telemetry processing systems were a triumph of engineering in their day, since that time the computer industry has advanced to the point where it is now advantageous to replace these systems with more modern technology. The Space Flight Operations Center (SFOC) Prototype group was established in 1985 as a workstation and software laboratory. The charter of the lab was to determine if it was possible to construct a multimission telemetry processing system using commercial, off-the-shelf computers that communicated via networks. The staff of the lab mirrored that of a typical skunk works operation -- a small, multi-disciplinary team with a great deal of autonomy that could get complex tasks done quickly. In an effort to determine which approaches would be useful, the prototype group experimented with all types of operating systems, inter-process communication mechanisms, network protocols, packet size parameters. Out of that pioneering work came the confidence that a multi-mission telemetry processing system could be built using high-level languages running in a heterogeneous, networked workstation environment. Experience revealed that the operating systems on all nodes should be similar (i.e., all VMS or all PC-DOS or all UNIX), and that a unique Data Transport Subsystem tool needed to be built to address the incompatibilities of network standards, byte ordering, and socket buffering. The advantages of building a telemetry processing system based on emerging industry standards were numerous: by employing these standards, we would no longer be locked into a single vendor. When new technology came to market which offered ten times the performance at one eighth the cost, it would be possible to attach the new machine to the network, re-compile the application code, and run. In addition, we would no longer be plagued with lack of manufacturer support when we encountered obscure bugs. And maybe, hopefully, the eternal elusive goal of software portability across different vendors' platforms would finally be available. Some highlights of our prototyping efforts are described.

Making tomorrow's mistakes today: Evolutionary prototyping for risk reduction and shorter development time

NASA Technical Reports Server (NTRS)

Friedman, Gary; Schwuttke, Ursula M.; Burliegh, Scott; Chow, Sanguan; Parlier, Randy; Lee, Lorrine; Castro, Henry; Gersbach, Jim

1993-01-01

In the early days of JPL's solar system exploration, each spacecraft mission required its own dedicated data system with all software applications written in the mainframe's native assembly language. Although these early telemetry processing systems were a triumph of engineering in their day, since that time the computer industry has advanced to the point where it is now advantageous to replace these systems with more modern technology. The Space Flight Operations Center (SFOC) Prototype group was established in 1985 as a workstation and software laboratory. The charter of the lab was to determine if it was possible to construct a multimission telemetry processing system using commercial, off-the-shelf computers that communicated via networks. The staff of the lab mirrored that of a typical skunk works operation -- a small, multi-disciplinary team with a great deal of autonomy that could get complex tasks done quickly. In an effort to determine which approaches would be useful, the prototype group experimented with all types of operating systems, inter-process communication mechanisms, network protocols, packet size parameters. Out of that pioneering work came the confidence that a multi-mission telemetry processing system could be built using high-level languages running in a heterogeneous, networked workstation environment. Experience revealed that the operating systems on all nodes should be similar (i.e., all VMS or all PC-DOS or all UNIX), and that a unique Data Transport Subsystem tool needed to be built to address the incompatibilities of network standards, byte ordering, and socket buffering. The advantages of building a telemetry processing system based on emerging industry standards were numerous: by employing these standards, we would no longer be locked into a single vendor. When new technology came to market which offered ten times the performance at one eighth the cost, it would be possible to attach the new machine to the network, re-compile the application code, and run. In addition, we would no longer be plagued with lack of manufacturer support when we encountered obscure bugs. And maybe, hopefully, the eternal elusive goal of software portability across different vendors' platforms would finally be available. Some highlights of our prototyping efforts are described.

SRGULL - AN ADVANCED ENGINEERING MODEL FOR THE PREDICTION OF AIRFRAME INTEGRATED SCRAMJET CYCLE PERFORMANCE

NASA Technical Reports Server (NTRS)

Walton, J. T.

1994-01-01

The development of a single-stage-to-orbit aerospace vehicle intended to be launched horizontally into low Earth orbit, such as the National Aero-Space Plane (NASP), has concentrated on the use of the supersonic combustion ramjet (scramjet) propulsion cycle. SRGULL, a scramjet cycle analysis code, is an engineer's tool capable of nose-to-tail, hydrogen-fueled, airframe-integrated scramjet simulation in a real gas flow with equilibrium thermodynamic properties. This program facilitates initial estimates of scramjet cycle performance by linking a two-dimensional forebody, inlet and nozzle code with a one-dimensional combustor code. Five computer codes (SCRAM, SEAGUL, INLET, Progam HUD, and GASH) originally developed at NASA Langley Research Center in support of hypersonic technology are integrated in this program to analyze changing flow conditions. The one-dimensional combustor code is based on the combustor subroutine from SCRAM and the two-dimensional coding is based on an inviscid Euler program (SEAGUL). Kinetic energy efficiency input for sidewall area variation modeling can be calculated by the INLET program code. At the completion of inviscid component analysis, Program HUD, an integral boundary layer code based on the Spaulding-Chi method, is applied to determine the friction coefficient which is then used in a modified Reynolds Analogy to calculate heat transfer. Real gas flow properties such as flow composition, enthalpy, entropy, and density are calculated by the subroutine GASH. Combustor input conditions are taken from one-dimensionalizing the two-dimensional inlet exit flow. The SEAGUL portions of this program are limited to supersonic flows, but the combustor (SCRAM) section can handle supersonic and dual-mode operation. SRGULL has been compared to scramjet engine tests with excellent results. SRGULL was written in FORTRAN 77 on an IBM PC compatible using IBM's FORTRAN/2 or Microway's NDP386 F77 compiler. The program is fully user interactive, but can also run in batch mode. It operates under the UNIX, VMS, NOS, and DOS operating systems. The source code is not directly compatible with all PC compilers (e.g., Lahey or Microsoft FORTRAN) due to block and segment size requirements. SRGULL executable code requires about 490K RAM and a math coprocessor on PC's. The SRGULL program was developed in 1989, although the component programs originated in the 1960's and 1970's. IBM, IBM PC, and DOS are registered trademarks of International Business Machines. VMS is a registered trademark of Digital Equipment Corporation. UNIX is a registered trademark of Bell Laboratories. NOS is a registered trademark of Control Data Corporation.

Anthropogenic impact in the Santa Maria di Leuca cold-water coral province (Mediterranean Sea): Observations and conservation straits

NASA Astrophysics Data System (ADS)

D'Onghia, G.; Calculli, C.; Capezzuto, F.; Carlucci, R.; Carluccio, A.; Grehan, A.; Indennidate, A.; Maiorano, P.; Mastrototaro, F.; Pollice, A.; Russo, T.; Savini, A.; Sion, L.; Tursi, A.

2017-11-01

The Santa Maria di Leuca (SML) cold-water coral (CWC) province is a proposed priority conservation area according to several conservation initiatives in the Mediterranean Sea. Part of it is a Fisheries Restricted Area (FRA). Anthropogenic impacts due to fishing on this FRA were investigated using a towed camera system during 2005. The geographic distribution of fishing effort in the SML CWC province was examined through an observers' program of longline and trawl fishing activities during 2009 and 2010 and Vessel Monitoring by satellite System (VMS) data from 2008 to 2013. Using the video system, it was possible to observe evidence of impacts in the FRA due to longlines, proved by remains of lines on the bottoms and/or entangled in corals, and those due to trawl nets, proved by trawl door scars on the bottom. The application of Generalized Liner Models indicates that the impacts due to longline were significantly related to a geographic site characterized by carbonate mounds while those from trawl net were significantly related to the soft bottoms, consisting of bioturbated fine-grained sediments. The presence of waste of various types was also observed in the FRA; plastic was the most widespread waste and was significantly related to a macrohabitat characterized by the presence of corals. The geographic distribution of fishing effort for each type of fishing were rather superimposed in the two years of the observers' program and six years of VMS data with a significantly greater fishing effort outside the FRA than inside this area. The trawlers generally fished on the muddy bottoms of the upper and middle slope within the SML CWC province and near and inside the northward limit of the FRA. The longliners fished mainly on the shelf in north and off the FRA. The coral by-catch was only recorded during 2009 in 26% of the trawl hauls. No coral by-catch was recorded from longlining in either year. The catches from longlining mainly consisted of Chelidonichthys lucerna, Merluccius merluccius and Conger conger while those from trawling mostly consisted of Aristeus antennatus, Aristaeomorpha foliacea and M. merluccius. The information collected during the observers' program and VMS data indicated greater impact due to trawling than longlining. The conservation and effective management of this vulnerable marine ecosystem remain difficult.

Very Massive Stars and the upper end of the IMF

NASA Astrophysics Data System (ADS)

Crowther, P.

2013-06-01

I discuss theoretical and observational evidence regarding the existence of Very Massive Stars (VMS) with initial masses significantly in excess of 100~Mo. Theoretical evidence includes consideration of the (classical) Eddington limit, while observational evidence involves efforts to interpret photometric and spectroscopic observations of the brightest stars in young, high mass clusters (R136a, Arches, NGC 3603), including new VLT/SINFONI and HST/STIS spectroscopy plus consideration of multiplicity (binaries and higher order systems).

The preliminary SOL (Sizing and Optimization Language) reference manual

NASA Technical Reports Server (NTRS)

Lucas, Stephen H.; Scotti, Stephen J.

1989-01-01

The Sizing and Optimization Language, SOL, a high-level special-purpose computer language has been developed to expedite application of numerical optimization to design problems and to make the process less error-prone. This document is a reference manual for those wishing to write SOL programs. SOL is presently available for DEC VAX/VMS systems. A SOL package is available which includes the SOL compiler and runtime library routines. An overview of SOL appears in NASA TM 100565.

Neuron-specific knockdown of the Drosophila fat induces reduction of life span, deficient locomotive ability, shortening of motoneuron terminal branches and defects in axonal targeting.

PubMed

Nakamura, Aya; Tanaka, Ryo; Morishita, Kazushige; Yoshida, Hideki; Higuchi, Yujiro; Takashima, Hiroshi; Yamaguchi, Masamitsu

2017-07-01

Mutations in FAT4 gene, one of the human FAT family genes, have been identified in Van Maldergem syndrome (VMS) and Hennekam lymphangiectasia-lymphedema syndrome (HS). The FAT4 gene encodes a large protein with extracellular cadherin repeats, EGF-like domains and Laminin G-like domains. FAT4 plays a role in tumor suppression and planar cell polarity. Drosophila contains a human FAT4 homologue, fat. Drosophila fat has been mainly studied with Drosophila eye and wing systems. Here, we specially knocked down Drosophila fat in nerve system. Neuron-specific knockdown of fat shortened the life span and induced the defect in locomotive abilities of adult flies. In consistent with these phenotypes, defects in synapse structure at neuromuscular junction were observed in neuron-specific fat-knockdown flies. In addition, aberrations in axonal targeting of photoreceptor neuron in third-instar larvae were also observed, suggesting that fat involves in axonal targeting. Taken together, the results indicate that Drosophila fat plays an essential role in formation and/or maintenance of neuron. Both VMS and HS show mental retardation and neuronal defects. We therefore consider that these two rare human diseases could possibly be caused by the defect in FAT4 function in neuronal cells. © 2017 Molecular Biology Society of Japan and John Wiley & Sons Australia, Ltd.

Investigation of the effects of bandwidth and time delay on helicopter roll-axis handling qualities

NASA Technical Reports Server (NTRS)

Pausder, Heinz-Juergen; Blanken, Chris L.

1992-01-01

Several years of cooperative research conducted under the U.S./German Memorandum of Understanding (MOU) in helicopter flight control has recently resulted in a successful handling qualities study. The focus of this cooperative research has been the effects on handling qualities due to time delays in combination with a high bandwidth vehicle. The jointly performed study included the use of U.S. ground-based simulation and German in-flight simulation facilities. The NASA-Ames Vertical Motion Simulator (VMS) was used to develop a high bandwidth slalom tracking task which took into consideration the constraints of the facilities. The VMS was also used to define a range of the test parameters and to perform initial handling qualities evaluations. The flight tests were conducted using DLR's variable-stability BO 105 S3 Advanced Technology Testing Helicopter System (ATTHeS). Configurations included a rate command and an attitude command response system with added time delays up to 160 milliseconds over the baseline and bandwidth values between 1.5 and 4.5 rad/sec. Sixty-six evaluations were performed in about 25 hr of flight time during 10 days of testing. The results indicate a need to more tightly constrain the allowable roll axis phase delay for the Level 1 and Level 2 requirements in the U.S. Army's specification for helicopter handling qualities, ADS-33C.

Investigation of the effects of bandwidth and time delay on helicopter roll-axis handling qualities

NASA Technical Reports Server (NTRS)

Blanken, Chris L.; Pausder, Heinz-Jurgen

1994-01-01

Several years of cooperative research conducted under the U.S./German Memorandum of Understanding (MOU) in helicopter aeromechanics have recently resulted in a successful handling qualities study. The focus of this cooperative research has been the effect of time delays in a high bandwidth vehicle on handling qualities. The jointly performed study included the use of U.S. ground-based simulation and German in-flight simulation facilities. The NASA-Ames Vertical Motion Simulator (VMS) was used to develop a high bandwidth slalom tracking task which took into consideration the constraints of the facilities. The VMS was used to define a range of the test parameters and to perform initial handling qualities evaluations. The flight tests were conducted using DLR's variable-stability BO 105 S3 Advanced Technology Testing Helicopter System (ATTHeS). Configurations included a rate command and an attitude command response system with added time delays of up to 160 milliseconds over the baseline and band width values between 1.5 and 4.5 rad/sec. Sixty-six evaluations were performed in about 25 hours of flight time during ten days of testing. The results indicate a need to more tightly constrain the allowable roll axis phase delay for the Level 1 and Level 2 requirements in the U.S. Army's specification for helicopter handling qualities Aeronautical Design Standard (ADS)-33C.

Investigation of the effects of bandwidth and time delay on helicopter roll-axis handling qualities

NASA Technical Reports Server (NTRS)

Pausder, Heinz-Juergen; Blanken, Chris L.

1993-01-01

Several years of cooperative research conducted under the U.S./German Memorandum of Understanding (MOU) in helicopter flight control has recently resulted in a successful handling qualities study. The focus of this cooperative research has been the effects on handling qualities due to time delays in combination with a high bandwidth vehicle. The jointly performed study included the use of U.S. ground-based simulation and German in-flight simulation facilities. The NASA-Ames Vertical Motion Simulator (VMS) was used to develop a high bandwidth slalom tracking task which took into consideration the constraints of the facilities. The VMS was also used to define a range of the test parameters and to perform initial handling qualities evaluations. The flight tests were conducted using DLR's variable-stability BO 105 S3 Advanced Technology Testing Helicopter System (ATTHeS). Configurations included a rate command and an attitude command response system with added time delays up to 160 milliseconds over the baseline and bandwidth values between 1.5 and 4.5 rad/sec. Sixty-six evaluations were performed in about 25 hours of flight time during ten days of testing. The results indicate a need to more tightly constrain the allowable roll axis phase delay for the Level 1 and Level 2 requirements in the U.S. Army's specification for helicopter handling qualities, ADS-33C.

FTOOLS: A FITS Data Processing and Analysis Software Package

NASA Astrophysics Data System (ADS)

Blackburn, J. Kent; Greene, Emily A.; Pence, William

1993-05-01

FTOOLS, a highly modular collection of utilities for processing and analyzing data in the FITS (Flexible Image Transport System) format, has been developed in support of the HEASARC (High Energy Astrophysics Research Archive Center) at NASA's Goddard Space Flight Center. Each utility performs a single simple task such as presentation of file contents, extraction of specific rows or columns, appending or merging tables, binning values in a column or selecting subsets of rows based on a boolean expression. Individual utilities can easily be chained together in scripts to achieve more complex operations such as the generation and displaying of spectra or light curves. The collection of utilities provides both generic processing and analysis utilities and utilities common to high energy astrophysics data sets. The FTOOLS software package is designed to be both compatible with IRAF and completely stand alone in a UNIX or VMS environment. The user interface is controlled by standard IRAF parameter files. The package is self documenting through the IRAF help facility and a stand alone help task. Software is written in ANSI C and FORTRAN to provide portability across most computer systems. The data format dependencies between hardware platforms are isolated through the FITSIO library package.

VTGRAPH - GRAPHIC SOFTWARE TOOL FOR VT TERMINALS

NASA Technical Reports Server (NTRS)

Wang, C.

1994-01-01

VTGRAPH is a graphics software tool for DEC/VT or VT compatible terminals which are widely used by government and industry. It is a FORTRAN or C-language callable library designed to allow the user to deal with many computer environments which use VT terminals for window management and graphic systems. It also provides a PLOT10-like package plus color or shade capability for VT240, VT241, and VT300 terminals. The program is transportable to many different computers which use VT terminals. With this graphics package, the user can easily design more friendly user interface programs and design PLOT10 programs on VT terminals with different computer systems. VTGRAPH was developed using the ReGis Graphics set which provides a full range of graphics capabilities. The basic VTGRAPH capabilities are as follows: window management, PLOT10 compatible drawing, generic program routines for two and three dimensional plotting, and color graphics or shaded graphics capability. The program was developed in VAX FORTRAN in 1988. VTGRAPH requires a ReGis graphics set terminal and a FORTRAN compiler. The program has been run on a DEC MicroVAX 3600 series computer operating under VMS 5.0, and has a virtual memory requirement of 5KB.

The effect of combined oral contraceptives and age on dysmenorrhoea: an epidemiological study.

PubMed

Lindh, Ingela; Ellström, Agneta Andersson; Milsom, Ian

2012-03-01

Combined oral contraceptives (COCs) are widely advocated as treatment for primary dysmenorrhoea, but their efficacy has been questioned in a Cochrane review. The aim of this study was to evaluate COCs and the influence of age on the severity of dysmenorrhoea. Postal questionnaires regarding weight/height, contraception, pregnancy history and other reproductive health factors were sent to random samples of 19-year-old women born in 1962 (n = 656), 1972 (n = 780) and 1982 (n = 666) resident in the city of Gothenburg in 1981, 1991 and 2001. The responders were assessed again 5 years later at the age of 24 years. Current severity of dysmenorrhoea was measured on each occasion by a verbal multidimensional scoring system (VMS) and by a visual analogue scale (VAS). The severity of dysmenorrhoea was lower (P< 0.0001) in COC users compared with non-users. In a longitudinal analysis of the severity of dysmenorrhoea, COC use and increasing age, independently of each other, were associated with the severity of dysmenorrhoea (COC use, VMS score: a reduction of 0.3 units/VAS: a reduction of 9 mm, both P< 0.0001; increasing age, VMS score: a reduction of 0.1 units per 5 years, P< 0.0001/VAS: a reduction of 5 mm per 5 years, P< 0.0001). Childbirth also reduced the severity of dysmenorrhoea (VAS, P< 0.01 with a reduction of 7 mm). Women from the 82-cohort reported a greater severity of dysmenorrhoea compared with the 62 and 72 cohorts at both 19 and 24 years of age. In this longitudinal case-control study, COC use and increasing age, independent of each other, reduced the severity of dysmenorrhoea. COC use reduced the severity of dysmenorrhoea more than increasing age and childbirth. There was a trend over time regarding the severity of dysmenorrhoea where women from the 82-cohort reported a greater severity of dysmenorrhoea compared with the 62 and 72 cohorts.

Assessment of Relationships Between Joint Motion Quality and Postural Control in Patients With Chronic Ankle Joint Instability.

PubMed

Bączkowicz, Dawid; Falkowski, Krzysztof; Majorczyk, Edyta

2017-08-01

Study Design Controlled laboratory study, cross-sectional. Background Lateral ankle sprains are among the most common injuries encountered during athletic participation. Following the initial injury, there is an alarmingly high risk of reinjury and development of chronic ankle instability (CAI), which is dependent on a combination of factors, including sensorimotor deficits and changes in the biomechanical environment of the ankle joint. Objective To evaluate CAI-related disturbances in arthrokinematic motion quality and postural control and the relationships between them. Methods Sixty-three male subjects (31 with CAI and 32 healthy controls) were enrolled in the study. For arthrokinematic motion quality analysis, the vibroarthrographic signals were collected during ankle flexion/extension motion using an acceleration sensor and described by variability (variance of mean squares [VMS]), amplitude (mean of 4 maximal and 4 minimal values [R4]), and frequency (vibroarthrographic signal bands of 50 to 250 Hz [P1] and 250 to 450 Hz [P2]) parameters. Using the Biodex Balance System, single-leg dynamic balance was measured by overall, anteroposterior, and mediolateral stability indices. Results Values of vibroarthrographic parameters (VMS, R4, P1 and P2) were significantly higher in the CAI group than those in the control group (P<.01). Similar results were obtained for all postural control parameters (overall, anteroposterior, and mediolateral stability indices; P<.05). Moreover, correlations between the overall stability index and VMS, and P1 and P2, as well as between the anteroposterior stability index and P1 and P2, were observed in the CAI patient group, but not in controls. Conclusion In patients with CAI, deficits in both quality of ankle arthrokinematic motion and postural control were present. Therefore, physical therapy interventions focused on improving ankle neuromuscular control and arthrokinematic function are necessary in CAI patient care. J Orthop Sports Phys Ther 2017;47(8):570-577. Epub 4 Nov 2016. doi:10.2519/jospt.2017.6836.

Simple debugging techniques for embedded subsystems

NASA Astrophysics Data System (ADS)

MacPherson, Matthew S.; Martin, Kevin S.

1990-08-01

This paper describes some of the tools and methods used for developing and debugging embedded subsystems at Fermilab. Specifically, these tools have been used for the Flying Wire project and are currently being employed for the New TECAR upgrade. The Flying Wire is a subsystem that swings a wire through the beam in order to measure luminosity and beam density distribution, and TECAR (Tevatron excitation controller and regulator) controls the power-supply ramp generation for the superconducting Tevatron accelerator at Fermilab. In both instances the subsystem hardware consists of a VME crate with one or more processors, shared memory and a network connection to the accelerator control system. Two real-time-operating systems are currently being used: VRTX for the Flying Wire system, and MTOS for New TECAR. The code which runs in these subsystems is a combination of C and assembler and is developed using the Microtec cross-development tools on a VAX 8650 running VMS. This paper explains how multiple debuggers are used to give the greatest possible flexibility from assembly to high-level debugging. Also discussed is how network debugging and network downloading can make a very effective and efficient means of finding bugs in the subsystem environment. The debuggers used are PROBE1, TRACER and the MTOS debugger.

MDSplus quality improvement project

DOE PAGES

Fredian, Thomas W.; Stillerman, Joshua; Manduchi, Gabriele; ...

2016-05-31

MDSplus is a data acquisition and analysis system used worldwide predominantly in the fusion research community. Development began 29 years ago on the OpenVMS operating system. Since that time there have been many new features added and the code has been ported to many different operating systems. There have been contributions to the MDSplus development from the fusion community in the way of feature suggestions, feature implementations, documentation and porting to different operating systems. The bulk of the development and support of MDSplus, however, has been provided by a relatively small core developer group of three or four members. Givenmore » the size of the development team and the large number of users much more effort was focused on providing new features for the community than on keeping the underlying code and documentation up to date with the evolving software development standards. To ensure that MDSplus will continue to provide the needs of the community in the future, the MDSplus development team along with other members of the MDSplus user community has commenced on a major quality improvement project. The planned improvements include changes to software build scripts to better use GNU Autoconf and Automake tools, refactoring many of the source code modules using new language features available in modern compilers, using GNU MinGW-w64 to create MS Windows distributions, migrating to a more modern source code management system, improvement of source documentation as well as improvements to the www.mdsplus.org web site documentation and layout, and the addition of more comprehensive test suites to apply to MDSplus code builds prior to releasing installation kits to the community. This paper should lead to a much more robust product and establish a framework to maintain stability as more enhancements and features are added. Finally, this paper will describe these efforts that are either in progress or planned for the near future.« less

SIG: a general-purpose signal processing program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lager, D.; Azevedo, S.

1986-02-01

SIG is a general-purpose signal processing, analysis, and display program. Its main purpose is to perform manipulations on time- and frequency-domain signals. It also accommodates other representations for data such as transfer function polynomials. Signal processing operations include digital filtering, auto/cross spectral density, transfer function/impulse response, convolution, Fourier transform, and inverse Fourier transform. Graphical operations provide display of signals and spectra, including plotting, cursor zoom, families of curves, and multiple viewport plots. SIG provides two user interfaces with a menu mode for occasional users and a command mode for more experienced users. Capability exits for multiple commands per line, commandmore » files with arguments, commenting lines, defining commands, automatic execution for each item in a repeat sequence, etc. SIG is presently available for VAX(VMS), VAX (BERKELEY 4.2 UNIX), SUN (BERKELEY 4.2 UNIX), DEC-20 (TOPS-20), LSI-11/23 (TSX), and DEC PRO 350 (TSX). 4 refs., 2 figs.« less

Determination of cyclic volatile methylsiloxanes in biota with a purge and trap method.

PubMed

Kierkegaard, Amelie; Adolfsson-Erici, Margaretha; McLachlan, Michael S

2010-11-15

The three cyclic volatile methylsiloxanes (cVMS), octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5), and dodecamethylcyclohexasiloxane (D6), are recently identified environmental contaminants. Methods for the trace analysis of these chemicals in environmental matrices are required. A purge and trap method to prepare highly purified sample extracts with a low risk of sample contamination is presented. Without prior homogenization, the sample is heated in water, and the cVMS are purged from the slurry and trapped on an Isolute ENV+ cartridge. They are subsequently eluted with n-hexane and analyzed with GC/MS. The method was tested for eight different matrices including ragworms, muscle tissue from lean and lipid-rich fish, cod liver, and seal blubber. Analyte recoveries were consistent within and between matrices, averaging 79%, 68%, and 56% for D4, D5, and D6, respectively. Good control of blank levels resulted in limits of quantification of 1.5, 0.6, and 0.6 ng/g wet weight. The repeatability was 12% (D5) and 15% (D6) at concentrations 9 and 2 times above the LOQ. The method was applied to analyze cVMS in fish from Swedish lakes, demonstrating that contamination in fish as a result of long-range atmospheric transport is low as compared to contamination from local sources.

Day-Ahead PM2.5 Concentration Forecasting Using WT-VMD Based Decomposition Method and Back Propagation Neural Network Improved by Differential Evolution

PubMed Central

Wang, Deyun; Liu, Yanling; Luo, Hongyuan; Yue, Chenqiang; Cheng, Sheng

2017-01-01

Accurate PM2.5 concentration forecasting is crucial for protecting public health and atmospheric environment. However, the intermittent and unstable nature of PM2.5 concentration series makes its forecasting become a very difficult task. In order to improve the forecast accuracy of PM2.5 concentration, this paper proposes a hybrid model based on wavelet transform (WT), variational mode decomposition (VMD) and back propagation (BP) neural network optimized by differential evolution (DE) algorithm. Firstly, WT is employed to disassemble the PM2.5 concentration series into a number of subsets with different frequencies. Secondly, VMD is applied to decompose each subset into a set of variational modes (VMs). Thirdly, DE-BP model is utilized to forecast all the VMs. Fourthly, the forecast value of each subset is obtained through aggregating the forecast results of all the VMs obtained from VMD decomposition of this subset. Finally, the final forecast series of PM2.5 concentration is obtained by adding up the forecast values of all subsets. Two PM2.5 concentration series collected from Wuhan and Tianjin, respectively, located in China are used to test the effectiveness of the proposed model. The results demonstrate that the proposed model outperforms all the other considered models in this paper. PMID:28704955

Atmospheric Concentrations of New Persistent Organic Pollutants and Emerging Chemicals of Concern in the Group of Latin America and Caribbean (GRULAC) Region.

PubMed

Rauert, Cassandra; Harner, Tom; Schuster, Jasmin K; Eng, Anita; Fillmann, Gilberto; Castillo, Luisa Eugenia; Fentanes, Oscar; Villa Ibarra, Martín; Miglioranza, Karina S B; Moreno Rivadeneira, Isabel; Pozo, Karla; Aristizábal Zuluaga, Beatriz Helena

2018-06-15

A special initiative was run by the Global Atmospheric Passive Sampling (GAPS) Network to provide atmospheric data on a range of emerging chemicals of concern and candidate and new persistent organic pollutants in the Group of Latin America and Caribbean (GRULAC) region. Regional-scale data for a range of flame retardants (FRs) including polybrominated diphenyl ethers (PBDEs), organophosphate esters (OPEs), and a range of alternative FRs (novel FRs) are reported over 2 years of sampling with low detection frequencies of the novel FRs. Atmospheric concentrations of the OPEs were an order of magnitude higher than all other FRs, with similar profiles at all sites. Regional-scale background concentrations of the poly- and perfluoroalkyl substances (PFAS), including the neutral PFAS (n-PFAS) and perfluoroalkyl acids (PFAAs), and the volatile methyl siloxanes (VMS) are also reported. Ethyl perfluorooctane sulfonamide (EtFOSA) was detected at highly elevated concentrations in Brazil and Colombia, in line with the use of the pesticide sulfluramid in this region. Similar concentrations of the perfluoroalkyl sulfonates (PFAS) were detected throughout the GRULAC region regardless of location type, and the VMS concentrations in air increased with the population density of sampling locations. This is the first report of atmospheric concentrations of the PFAAs and VMS from this region.

ELAPSE - NASA AMES LISP AND ADA BENCHMARK SUITE: EFFICIENCY OF LISP AND ADA PROCESSING - A SYSTEM EVALUATION

NASA Technical Reports Server (NTRS)

Davis, G. J.

1994-01-01

One area of research of the Information Sciences Division at NASA Ames Research Center is devoted to the analysis and enhancement of processors and advanced computer architectures, specifically in support of automation and robotic systems. To compare systems' abilities to efficiently process Lisp and Ada, scientists at Ames Research Center have developed a suite of non-parallel benchmarks called ELAPSE. The benchmark suite was designed to test a single computer's efficiency as well as alternate machine comparisons on Lisp, and/or Ada languages. ELAPSE tests the efficiency with which a machine can execute the various routines in each environment. The sample routines are based on numeric and symbolic manipulations and include two-dimensional fast Fourier transformations, Cholesky decomposition and substitution, Gaussian elimination, high-level data processing, and symbol-list references. Also included is a routine based on a Bayesian classification program sorting data into optimized groups. The ELAPSE benchmarks are available for any computer with a validated Ada compiler and/or Common Lisp system. Of the 18 routines that comprise ELAPSE, provided within this package are 14 developed or translated at Ames. The others are readily available through literature. The benchmark that requires the most memory is CHOLESKY.ADA. Under VAX/VMS, CHOLESKY.ADA requires 760K of main memory. ELAPSE is available on either two 5.25 inch 360K MS-DOS format diskettes (standard distribution) or a 9-track 1600 BPI ASCII CARD IMAGE format magnetic tape. The contents of the diskettes are compressed using the PKWARE archiving tools. The utility to unarchive the files, PKUNZIP.EXE, is included. The ELAPSE benchmarks were written in 1990. VAX and VMS are trademarks of Digital Equipment Corporation. MS-DOS is a registered trademark of Microsoft Corporation.

Evaluation of Helmet Mounted Display Alerting Symbology

NASA Technical Reports Server (NTRS)

DeMaio, Joe; Rutkowski, Michael (Technical Monitor)

2000-01-01

Proposed helicopter helmet mounted displays will be used to alert the pilot to a variety of conditions, from threats to equipment problems. The present research was performed under the NASA Safe All-weather Flight Operations Research (SAFOR) program supported by a joint Army/NASA research agreement. The purpose of the research was to examine ways to optimize the alerting effectiveness of helmet display symbology. The research used two approaches to increasing the effectiveness of alerts. One was to increase the ability of the alert to attract attention by using the entire display surface. The other was to include information about the required response in the alert itself. The investigation was conducted using the NASA Ames Research Center's six-degree-of-freedom vertical motion simulator (VMS) with a rotorcraft cockpit. Helmet display symbology was based on the AH-64's pilot night vision system (PNVS), cruise mode symbology. A standardized mission was developed, that consisted of 11 legs. The mission included four tasks, which allowed variation in the frequency of alerts. The general trend in the data points to a small benefit from both the full-screen alert and the partial information alert.

A synthesis of mineralization styles and geodynamic settings of the Paleozoic and Mesozoic metallic ore deposits in the Altay Mountains, NW China

NASA Astrophysics Data System (ADS)

Yang, Fuquan; Geng, Xinxia; Wang, Rui; Zhang, Zhixin; Guo, Xuji

2018-06-01

The Altay Mountains within the Xinjiang region of northwestern China hosts major metallic ore deposits. Here we review the geological characteristics, metallogenic features and tectonic settings of these deposits. The metallic ore deposits in the Altay Mountains occur mainly within four regions: North Altay, Central Altay, South Altay and Erqis. We recognize seven types of metallic ore deposits in the Altay Mountains: VMS, submarine volcanogenic iron, magmatic, skarn, pegmatite, hydrothermal vein (Cu-Zn, Fe) and orogenic gold. Among these types, the VMS, pegmatite, orogenic gold and skarn deposits are the most common. Most of the rare metal pegmatite deposits are distributed in Central Altay, with only a few in South Altay. The VMS, submarine volcanogenic type iron and skarn-type deposits are distributed in South Altay, whereas the orogenic-type gold deposits are distributed in the Erqis Fault belt. The hydrothermal vein-type deposits occur in the Erqis Fault belt and Chonghu'er Basin in South Altay. Magmatic-type deposits are mostly in the Erqis Fault belt and Central Altay. Based on isotopic age data, the VMS, submarine volcanogenic-type Fe and skarn-type Cu, Pb, Zn, Fe mineralization occurred during Early-Middle Devonian (∼410-377 Ma), orogenic-type Au, magmatic-type Cu-Ni, and a small number of skarn-type Fe, hydrothermal vein-type Cu-Zn, pegmatite-type rare-metal deposits in Early-Middle Permian (293-261 Ma), pegmatite-type rare-metal deposits, few skarn-type Fe deposit in Early-Middle Triassic (248-232 Ma), and dominantly represented by pegmatite-type rare-metal deposits in Late Triassic-Early Jurassic (223-180 Ma). The metallic ore deposits in the Altay Mountains formed in various tectonic settings, such as the Early-Middle Devonian continental arc and oceanic island arc, Early-Middle Permian post-collisional extensional setting, and Triassic-Early Jurassic intracontinental setting.

Effects of oral versus transdermal menopausal hormone treatments on self-reported sleep domains and their association with vasomotor symptoms in recently menopausal women enrolled in the Kronos Early Estrogen Prevention Study (KEEPS).

PubMed

Cintron, Dahima; Lahr, Brian D; Bailey, Kent R; Santoro, Nanette; Lloyd, Robin; Manson, JoAnn E; Neal-Perry, Genevieve; Pal, Lubna; Taylor, Hugh S; Wharton, Whitney; Naftolin, Fredrick; Harman, S Mitchell; Miller, Virginia M

2018-02-01

This study determined whether two different formulations of hormone therapy (HT): oral conjugated equine estrogens (o-CEE; 0.45 mg/d, n = 209), transdermal 17β-estradiol (t-E2; 50 μg/d, n = 201) plus cyclic progesterone (Prometrium, 200 mg) or placebo (PBO, n = 243) affected sleep domains in participants of the Kronos Early Estrogen Prevention Study. Participants completed the Pittsburgh Sleep Quality Index at baseline and during the intervention at 6, 18, 36, and 48 months. Global sleep quality and individual sleep domain scores were compared between treatments using analysis of covariance, and correlated with vasomotor symptom (VMS) scores using Spearman correlation coefficients. Global Pittsburgh Sleep Quality Index scores (mean 6.3; 24% with score >8) were similar across groups at baseline and were reduced (improved sleep quality) by both HT (average change -1.27 [o-CEE] and -1.32 [t-E2]) when compared with PBO (-0.60; P = 0.001 [o-CEE vs PBO] and P = 0.002 [t-E2 vs PBO]). Domain scores for sleep satisfaction and latency improved with both HT. The domain score for sleep disturbances improved more with t-E2 than o-CEE or PBO. Global sleep scores significantly correlated with VMS severity (rs = 0.170, P < 0.001 for hot flashes; rs = 0.177, P < 0.001 for night sweats). Change in scores for all domains except sleep latency and sleep efficiency correlated with change in severity of VMS. Poor sleep quality is common in recently menopausal women. Sleep quality improved with both HT formulations. The relationship of VMS with domains of sleep suggests that assessing severity of symptoms and domains of sleep may help direct therapy to improve sleep for postmenopausal women.

Optical imaging of the ventral medullary surface of developing kittens during ventilatory challenges.

PubMed

Gozal, D; Dong, X W; Rector, D M; Harper, R K; Harper, R M

1996-01-01

We used large-array optical recording procedures to examine maturation of regional neural activity within the ventral medullary surface (VMS) of anaesthetized kittens during graded hypercapnic and hypoxic challenges. The VMS was exposed through a ventral surgical approach in 10, 20, 30, and 45-day-old kittens and in adult cats under sodium pentobarbital anaesthesia. Arterial pressure, costal diaphragmatic EMG, and ECG were continuously monitored. A coherent image conduit with 12 mu fibre resolution was attached to a charge-coupled-device camera and positioned over the VMS. Reflected 660 nm light was digitized continuously at 2-s intervals during a baseline period, hyperoxic hypercapnia, (3, 5, and 10% CO2 in O2), and poikylocapnic hypoxia (6%, 9%, and 12% O2 in N2), and recovery. Sixty to seventy-five images within each epoch were averaged, and subtracted from baseline. Regional differences within the image were determined by ANOVA procedures (alpha = 0.05). During hypercapnia, an overall decrease in neural activity (increase in scattered light) occurred, which was marginally age-dependent. By 30 days, regional bidirectional reflectance changes in response to CO2 emerged in a small proportion of animals, and were similar to adult responses. Hypoxia induced a dose- and age-dependent decrease in overall scattered light. Transient "on" and "off" responses were common under both ventilatory stimuli. In 20-30-day kittens, marked rebound responses in reflectance accompanied cessation of hypoxic stimuli; such patterns were absent at other ages. At 30 days, a caudal-rostral bidirectionality in response to mild hypoxia (12% O2) began to emerge in a subset of animals. We conclude that dose-dependent response to ventilatory stimuli occur in the VMS at all post-natal ages of the kitten; however, in hypoxia, the magnitude of the overall reflectance changes is diminished relative to adult patterns. Rebound responses to hypoxia are present at particular ages, and older kittens begin to show a topographical organization of neural activation.

Effects of oral versus transdermal menopausal hormone treatments on self-reported sleep domains and their association with vasomotor symptoms in recently menopausal women enrolled in the Kronos Early Estrogen Prevention Study (KEEPS)

PubMed Central

Cintron, Dahima; Lahr, Brian D.; Bailey, Kent R.; Santoro, Nanette; Lloyd, Robin; Manson, JoAnn E.; Neal-Perry, Genevieve; Pal, Lubna; Taylor, Hugh S.; Wharton, Whitney; Naftolin, Fredrick; Harman, S. Mitchell; Miller, Virginia M.

2018-01-01

Abstract Objective: This study determined whether two different formulations of hormone therapy (HT): oral conjugated equine estrogens (o-CEE; 0.45 mg/d, n = 209), transdermal 17β-estradiol (t-E2; 50 μg/d, n = 201) plus cyclic progesterone (Prometrium, 200 mg) or placebo (PBO, n = 243) affected sleep domains in participants of the Kronos Early Estrogen Prevention Study. Methods: Participants completed the Pittsburgh Sleep Quality Index at baseline and during the intervention at 6, 18, 36, and 48 months. Global sleep quality and individual sleep domain scores were compared between treatments using analysis of covariance, and correlated with vasomotor symptom (VMS) scores using Spearman correlation coefficients. Results: Global Pittsburgh Sleep Quality Index scores (mean 6.3; 24% with score >8) were similar across groups at baseline and were reduced (improved sleep quality) by both HT (average change −1.27 [o-CEE] and −1.32 [t-E2]) when compared with PBO (−0.60; P = 0.001 [o-CEE vs PBO] and P = 0.002 [t-E2 vs PBO]). Domain scores for sleep satisfaction and latency improved with both HT. The domain score for sleep disturbances improved more with t-E2 than o-CEE or PBO. Global sleep scores significantly correlated with VMS severity (rs = 0.170, P < 0.001 for hot flashes; rs = 0.177, P < 0.001 for night sweats). Change in scores for all domains except sleep latency and sleep efficiency correlated with change in severity of VMS. Conclusions: Poor sleep quality is common in recently menopausal women. Sleep quality improved with both HT formulations. The relationship of VMS with domains of sleep suggests that assessing severity of symptoms and domains of sleep may help direct therapy to improve sleep for postmenopausal women. PMID:28832429

Determination of cyclic volatile methylsiloxanes in personal care products by gas chromatography.

PubMed

Brothers, H M; Boehmer, T; Campbell, R A; Dorn, S; Kerbleski, J J; Lewis, S; Mund, C; Pero, D; Saito, K; Wieser, M; Zoller, W

2017-12-01

Organosiloxanes are prevalent in personal care products (PCPs) due to the desired properties they impart in the usage and application of such products. However, the European Chemical Agency (ECHA) has recently published restriction proposals on the amount of two cyclic siloxanes, octamethylcyclotetrasiloxane (D4) and decamethylcyclotetrasiloxane (D5), allowed in wash off products such as shampoos and conditioners which are discharged down the drain during consumer use. This legislation will require that reliable analytical methods are available for manufacturers and government agencies to use in documenting compliance with the restrictions. This article proposes a simple analytical method to enable accurate measurement of these compounds down to the circa 0.1 weight per cent level in PCPs. Although gas chromatography methods are reported in the literature for quantitation of D4 and D5 in several matrices including PCPs, the potential for generation of false positives due to contamination, co-elution and in situ generation of cyclic volatile methylsiloxanes (cVMS) is always present and needs to be controlled. This report demonstrates the applicability of using a combination of emulsion break, liquid-liquid extraction and silylation sample preparation followed by GC-FID analysis as a suitable means of analysing PCPs for specific cVMS. The reliability and limitations of such methodology were demonstrated through several round-robin studies conducted in the laboratories of a consortium of silicone manufacturers. In addition, this report presents examples of false positives encountered during development of the method and presents a comparative analysis between this method and a published QuEChERS sample preparation procedure to illustrate the potential for generation of false positives when an inappropriate approach is applied to determination of cVMS in personal care products. This report demonstrates that an approach to determine cVMS levels in personal care products is to perform an emulsion break on the sample, isolate the non-polar phase from the emulsion break and treat with a silylation reagent to abate potential in situ formation of cyclics during the course of GC-FID analysis. Round-robin studies conducted in laboratories representing multiple siloxane manufacturers demonstrated the reliability of the GC-FID method when measuring cVMS in PCPs down to circa 0.1%. © 2017 CES - Silicones Europe. International Journal of Cosmetic Science published by John Wiley & Sons Ltd on behalf of Society of Cosmetic Scientists and the Société Française de Cosmétologie.

Renal Cyst Pseudoenhancement: Intraindividual Comparison Between Virtual Monochromatic Spectral Images and Conventional Polychromatic 120-kVp Images Obtained During the Same CT Examination and Comparisons Among Images Reconstructed Using Filtered Back Projection, Adaptive Statistical Iterative Reconstruction, and Model-Based Iterative Reconstruction

PubMed Central

Yamada, Yoshitake; Yamada, Minoru; Sugisawa, Koichi; Akita, Hirotaka; Shiomi, Eisuke; Abe, Takayuki; Okuda, Shigeo; Jinzaki, Masahiro

2015-01-01

Abstract The purpose of this study was to compare renal cyst pseudoenhancement between virtual monochromatic spectral (VMS) and conventional polychromatic 120-kVp images obtained during the same abdominal computed tomography (CT) examination and among images reconstructed using filtered back projection (FBP), adaptive statistical iterative reconstruction (ASIR), and model-based iterative reconstruction (MBIR). Our institutional review board approved this prospective study; each participant provided written informed consent. Thirty-one patients (19 men, 12 women; age range, 59–85 years; mean age, 73.2 ± 5.5 years) with renal cysts underwent unenhanced 120-kVp CT followed by sequential fast kVp-switching dual-energy (80/140 kVp) and 120-kVp abdominal enhanced CT in the nephrographic phase over a 10-cm scan length with a random acquisition order and 4.5-second intervals. Fifty-one renal cysts (maximal diameter, 18.0 ± 14.7 mm [range, 4–61 mm]) were identified. The CT attenuation values of the cysts as well as of the kidneys were measured on the unenhanced images, enhanced VMS images (at 70 keV) reconstructed using FBP and ASIR from dual-energy data, and enhanced 120-kVp images reconstructed using FBP, ASIR, and MBIR. The results were analyzed using the mixed-effects model and paired t test with Bonferroni correction. The attenuation increases (pseudoenhancement) of the renal cysts on the VMS images reconstructed using FBP/ASIR (least square mean, 5.0/6.0 Hounsfield units [HU]; 95% confidence interval, 2.6–7.4/3.6–8.4 HU) were significantly lower than those on the conventional 120-kVp images reconstructed using FBP/ASIR/MBIR (least square mean, 12.1/12.8/11.8 HU; 95% confidence interval, 9.8–14.5/10.4–15.1/9.4–14.2 HU) (all P < .001); on the other hand, the CT attenuation values of the kidneys on the VMS images were comparable to those on the 120-kVp images. Regardless of the reconstruction algorithm, 70-keV VMS images showed a lower degree of pseudoenhancement of renal cysts than 120-kVp images, while maintaining kidney contrast enhancement comparable to that on 120-kVp images. PMID:25881852

A direct application of the non-linear inverse transformation flight control system design on a STOVL aircraft

NASA Technical Reports Server (NTRS)

Chung, W. W.; Mcneill, W. E.; Stortz, M. W.

1993-01-01

The nonlinear inverse transformation flight control system design method is applied to the Lockheed Ft. Worth Company's E-7D short takeoff and vertical land (STOVL) supersonic fighter/attack aircraft design with a modified General Electric F110 engine which has augmented propulsive lift capability. The system is fully augmented to provide flight path control and velocity control, and rate command attitude hold for angular axes during the transition and hover operations. In cruise mode, the flight control system is configured to provide direct thrust command, rate command attitude hold for pitch and roll axes, and sideslip command with turn coordination. A control selector based on the nonlinear inverse transformation method is designed specifically to be compatible with the propulsion system's physical configuration which has a two dimensional convergent-divergent aft nozzle, a vectorable ventral nozzle, and a thrust augmented ejector. The nonlinear inverse transformation is used to determine the propulsive forces and nozzle deflections, which in combination with the aerodynamic forces and moments (including propulsive induced contributions), and gravitational force, are required to achieve the longitudinal and vertical acceleration commands. The longitudinal control axes are fully decoupled within the propulsion system's performance envelope. A piloted motion-base flight simulation was conducted on the Vertical Motion Simulator (VMS) at NASA Ames Research Center to examine the handling qualities of this design. Based on results of the simulation, refinements to the control system have been made and will also be covered in the report.

Parameters and functional analysis of the deep epaxial muscles in the thoracic, lumbar and sacral regions of the equine spine.

PubMed

García Liñeiro, J A; Graziotti, G H; Rodríguez Menéndez, J M; Ríos, C M; Affricano, N O; Victorica, C L

2018-07-01

The epaxial muscles produce intervertebral rotation in the transverse, vertical and axial axes. These muscles also counteract the movements induced by gravitational and inertial forces and movements produced by antagonistic muscles and the intrinsic muscles of the pelvic limb. Their fascicles are innervated by the dorsal branch of the spinal nerve, which corresponds to the metamere of its cranial insertion in the spinous process. The structure allows the function of the muscles to be predicted: those with long and parallel fibres have a shortening function, whereas the muscles with short and oblique fibres have an antigravity action. In the horse, the multifidus muscle of the thoracolumbar region extends in multiple segments of two to eight vertebral motion segments (VMS). Functionally, the multifidus muscle is considered a spine stabiliser, maintaining VMS neutrality during spine rotations. However, there is evidence of the structural and functional heterogeneity of the equine thoracolumbar multifidus muscle, depending on the VMS considered, related to the complex control of the required neuromuscular activity. Osteoarticular lesions of the spine have been directly related to asymmetries of the multifidus muscle. The lateral (LDSM) and medial (MDSM) dorsal sacrocaudal muscles may be included in the multifidus complex, the function of which is also unclear in the lumbosacral region. The functional parameters of maximum force (F max ), maximum velocity of contraction (V max ) and joint moment (M) of the multifidus muscles inserted in the 4th, 9th, 12th and 17th thoracic and 3rd and 4th lumbar vertebrae of six horses were studied postmortem (for example: 4MT4 indicates the multifidus muscle that crosses four metameres with cranial insertion in the T4 vertebra). Furthermore, the structural and functional characteristics of LDSM and MDSM were determined. Data were analysed by analysis of variance (anova) in a randomised complete block design (P ≤ 0.05). For some muscles, the ordering of V max values was almost opposite to that of F max values, generally indicating antigravity or dynamic functions, depending on the muscle and VMS. The muscles 3MT12, 3ML3 and 4ML4 exhibited high F max and low V max values, indicating a stabilising action. The very long 7MT4 and 8MT4 multifidus had low F max and high V max values, suggesting a shortening action. However, some functional characteristics of interest did not fall within these general observations, also indicating a dual action. In summary, the results of the analysis of various structural and functional parameters confirm the structural and functional heterogeneity of the equine thoracolumbar multifidus complex, depending on the VMS, regardless of the number of metameres crossing each fascicle. To clarify the functions of the equine multifidus muscle complex, this study aimed to assess its functional parameters in thoracolumbar VMSs with different movement characteristics and in the MDSM and LDSM muscles, hypothesising that the functional parameters vary significantly when the VMS is considered. © 2018 Anatomical Society.

Mapping Fishing Effort through AIS Data

PubMed Central

Natale, Fabrizio; Gibin, Maurizio; Alessandrini, Alfredo; Vespe, Michele; Paulrud, Anton

2015-01-01

Several research initiatives have been undertaken to map fishing effort at high spatial resolution using the Vessel Monitoring System (VMS). An alternative to the VMS is represented by the Automatic Identification System (AIS), which in the EU became compulsory in May 2014 for all fishing vessels of length above 15 meters. The aim of this paper is to assess the uptake of the AIS in the EU fishing fleet and the feasibility of producing a map of fishing effort with high spatial and temporal resolution at European scale. After analysing a large AIS dataset for the period January-August 2014 and covering most of the EU waters, we show that AIS was adopted by around 75% of EU fishing vessels above 15 meters of length. Using the Swedish fleet as a case study, we developed a method to identify fishing activity based on the analysis of individual vessels’ speed profiles and produce a high resolution map of fishing effort based on AIS data. The method was validated using detailed logbook data and proved to be sufficiently accurate and computationally efficient to identify fishing grounds and effort in the case of trawlers, which represent the largest portion of the EU fishing fleet above 15 meters of length. Issues still to be addressed before extending the exercise to the entire EU fleet are the assessment of coverage levels of the AIS data for all EU waters and the identification of fishing activity in the case of vessels other than trawlers. PMID:26098430

Mapping Fishing Effort through AIS Data.

PubMed

Natale, Fabrizio; Gibin, Maurizio; Alessandrini, Alfredo; Vespe, Michele; Paulrud, Anton

2015-01-01

Several research initiatives have been undertaken to map fishing effort at high spatial resolution using the Vessel Monitoring System (VMS). An alternative to the VMS is represented by the Automatic Identification System (AIS), which in the EU became compulsory in May 2014 for all fishing vessels of length above 15 meters. The aim of this paper is to assess the uptake of the AIS in the EU fishing fleet and the feasibility of producing a map of fishing effort with high spatial and temporal resolution at European scale. After analysing a large AIS dataset for the period January-August 2014 and covering most of the EU waters, we show that AIS was adopted by around 75% of EU fishing vessels above 15 meters of length. Using the Swedish fleet as a case study, we developed a method to identify fishing activity based on the analysis of individual vessels' speed profiles and produce a high resolution map of fishing effort based on AIS data. The method was validated using detailed logbook data and proved to be sufficiently accurate and computationally efficient to identify fishing grounds and effort in the case of trawlers, which represent the largest portion of the EU fishing fleet above 15 meters of length. Issues still to be addressed before extending the exercise to the entire EU fleet are the assessment of coverage levels of the AIS data for all EU waters and the identification of fishing activity in the case of vessels other than trawlers.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This report contains papers on the following topics: NREN Security Issues: Policies and Technologies; Layer Wars: Protect the Internet with Network Layer Security; Electronic Commission Management; Workflow 2000 - Electronic Document Authorization in Practice; Security Issues of a UNIX PEM Implementation; Implementing Privacy Enhanced Mail on VMS; Distributed Public Key Certificate Management; Protecting the Integrity of Privacy-enhanced Electronic Mail; Practical Authorization in Large Heterogeneous Distributed Systems; Security Issues in the Truffles File System; Issues surrounding the use of Cryptographic Algorithms and Smart Card Applications; Smart Card Augmentation of Kerberos; and An Overview of the Advanced Smart Card Access Control System.more » Selected papers were processed separately for inclusion in the Energy Science and Technology Database.« less

Very Massive Stars in the local Universe

NASA Astrophysics Data System (ADS)

Vink, Jorick S.; Heger, Alexander; Krumholz, Mark R.; Puls, Joachim; Banerjee, S.; Castro, N.; Chen, K.-J.; Chenè, A.-N.; Crowther, P. A.; Daminelli, A.; Gräfener, G.; Groh, J. H.; Hamann, W.-R.; Heap, S.; Herrero, A.; Kaper, L.; Najarro, F.; Oskinova, L. M.; Roman-Lopes, A.; Rosen, A.; Sander, A.; Shirazi, M.; Sugawara, Y.; Tramper, F.; Vanbeveren, D.; Voss, R.; Wofford, A.; Zhang, Y.

2015-03-01

Recent studies have claimed the existence of very massive stars (VMS) up to 300 M ⊙ in the local Universe. As this finding may represent a paradigm shift for the canonical stellar upper-mass limit of 150 M ⊙, it is timely to discuss the status of the data, as well as the far-reaching implications of such objects. We held a Joint Discussion at the General Assembly in Beijing to discuss (i) the determination of the current masses of the most massive stars, (ii) the formation of VMS, (iii) their mass loss, and (iv) their evolution and final fate. The prime aim was to reach broad consensus between observers and theorists on how to identify and quantify the dominant physical processes.

Ada Compiler Validation Summary Report: Certificate Number: 940305W1. 11335 TLD Systems, Ltd. TLD Comanche VAX/i960 Ada Compiler System, Version 4.1.1 VAX Cluster under VMS 5.5 = Tronix JIAWG Execution Vehicle (i960MX) under TLD Real Time Executive, Version 4.1.1

DTIC Science & Technology

1994-03-14

Comanche VAX/i960 Ada Compiler System, Version 4.1.1 Host Computer System: Digital Local Area Network VAX Cluster executing on (2) MicroVAX 3100 Model 90...31 $MAX DIGITS 15 SmNx INT 2147483647 $MAX INT PLUS_1 2147483648 $MIN IN -2_147483648 A-3 MACR PARAMEERIS $NAME NO SUCH INTEGER TYPE $NAME LIST...nested generlcs are Supported and generics defined in libary units are pexitted. zt is not possible to pen ore a macro instantiation for a generic I

Concentrations of cyclic volatile methylsiloxanes in biosolid amended soil, influent, effluent, receiving water, and sediment of wastewater treatment plants in Canada.

PubMed

Wang, De-Gao; Steer, Helena; Tait, Tara; Williams, Zackery; Pacepavicius, Grazina; Young, Teresa; Ng, Timothy; Smyth, Shirley Anne; Kinsman, Laura; Alaee, Mehran

2013-10-01

A comprehensive surveillance program was conducted to determine the occurrence of three cyclic volatile methylsiloxanes (cVMS) octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5), and dodecamethylcyclohexasiloxane (D6) in environmental compartments impacted by wastewater effluent discharges. Eleven wastewater treatment plants (WWTPs), representative of those found in Southern Ontario and Southern Quebec, Canada, were investigated to determine levels of cVMS in their influents and effluents. In addition, receiving water and sediment impacted by WWTP effluents, and biosolid-amended soil from agricultural fields were also analyzed for a preliminary evaluation of the environmental exposure of cVMS in media impacted by wastewater effluent and solids. A newly-developed large volume injection (septumless head adapter and cooled injection system) gas chromatography - mass spectrometry method was used to avoid contamination originating from instrumental analysis. Concentrations of D4, D5, and D6 in influents to the 11 WWTPs were in the range 0.282-6.69μgL(-1), 7.75-135μgL(-1), and 1.53-26.9μgL(-1), respectively. In general, wastewater treatment showed cVMS removal rates of greater than 92%, regardless of treatment type. The D4, D5, and D6 concentration ranges in effluent were <0.009-0.045μgL(-1), <0.027-1.56μgL(-1), and <0.022-0.093μgL(-1), respectively. The concentrations in receiving water influenced by effluent, were lower compared to those in effluent in most cases, with the ranges <0.009-0.023μgL(-1), <0.027-1.48μgL(-1), and <0.022-0.151μgL(-1) for D4, D5, and D6, respectively. Sediment concentrations ranged from <0.003-0.049μgg(-1)dw, 0.011-5.84μgg(-1)dw, and 0.004-0.371μgg(-1)dw for D4, D5, and D6, respectively. The concentrations in biosolid-amended soil, having values of <0.008-0.017μgg(-1)dw, <0.007-0.221μgg(-1)dw, and <0.009-0.711μgg(-1)dw for D4, D5, and D6, respectively, were lower than those in sediment impacted by wastewater effluent in most cases. In comparison with the no-observed-effected concentrations (NOEC) and IC50 (concentration that causes 50% inhibition of the response) values, the potential risks to aquatic, sediment-dwelling, and terrestrial organisms from these reported concentrations are low. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

NYU Ada/Ed User’s Guide - Version 1.4 for VAX/VMS Systems.

DTIC Science & Technology

1984-07-01

Executble fie).M h le contains the Intermediate code from the alajie, bound togethr with the scomsary compilaton units bum libaries rquested by the pmn...3.5.4 bounds in -n integer type definition must be of sme intge type 3.5.7 Expect static expression for digits 3.5.7 Expect integer expression for...DI&13 3.5.7 Invalid digits value in real type dedwaation 3.5.7 Expect static expression for delta 3.5.9 Expression for delta must be of some real type

Multiplexing the Ethernet Interface Among VAX/VMS Users.

DTIC Science & Technology

1983-12-01

Microcomputer Development Systems (MDS) and VAX/VPS sy’stemn were used for the implementation and testing of the project. The software is designed in such a...detailed design and .splesenta- toa of tie project. Is realLty chape: I constitutes the doee-.at os of the developed software. In soms instances, thisgs that...changes. 460i9n4t 4 provides a high level design of a virtual x $44 aletwock. alcag with some hints which may be useful So 44e W". who will work in this

DFACS - DATABASE, FORMS AND APPLICATIONS FOR CABLING AND SYSTEMS, VERSION 3.30

NASA Technical Reports Server (NTRS)

Billitti, J. W.

1994-01-01

DFACS is an interactive multi-user computer-aided engineering tool for system level electrical integration and cabling engineering. The purpose of the program is to provide the engineering community with a centralized database for entering and accessing system functional definitions, subsystem and instrument-end circuit pinout details, and harnessing data. The primary objective is to provide an instantaneous single point of information interchange, thus avoiding error-prone, time-consuming, and costly multiple-path data shuttling. The DFACS program, which is centered around a single database, has built-in menus that provide easy data input and access for all involved system, subsystem, and cabling personnel. The DFACS program allows parallel design of circuit data sheets and harness drawings. It also recombines raw information to automatically generate various project documents and drawings including the Circuit Data Sheet Index, the Electrical Interface Circuits List, Assembly and Equipment Lists, Electrical Ground Tree, Connector List, Cable Tree, Cabling Electrical Interface and Harness Drawings, Circuit Data Sheets, and ECR List of Affected Interfaces/Assemblies. Real time automatic production of harness drawings and circuit data sheets from the same data reservoir ensures instant system and cabling engineering design harmony. DFACS also contains automatic wire routing procedures and extensive error checking routines designed to minimize the possibility of engineering error. DFACS is designed to run on DEC VAX series computers under VMS using Version 6.3/01 of INGRES QUEL/OSL, a relational database system which is available through Relational Technology, Inc. The program is available in VAX BACKUP format on a 1600 BPI 9-track magnetic tape (standard media) or a TK50 tape cartridge. DFACS was developed in 1987 and last updated in 1990. DFACS is a copyrighted work with all copyright vested in NASA. DEC, VAX and VMS are trademarks of Digital Equipment Corporation. INGRES QUEL/OSL is a trademark of Relational Technology, Inc.

On-Line Model-Based System For Nuclear Plant Monitoring

NASA Astrophysics Data System (ADS)

Tsoukalas, Lefteri H.; Lee, G. W.; Ragheb, Magdi; McDonough, T.; Niziolek, F.; Parker, M.

1989-03-01

A prototypical on-line model-based system, LASALLE1, developed at the University of Illinois in collaboration with the Illinois Department of Nuclear Safety (IDNS) is described. Its main purpose is to interpret about 300 signals, updated every two minutes at IDNS from the LaSalle Nuclear Power Plant, and to diagnose possible abnormal conditions. It is written in VAX/VMS OPS5 and operates on both the on-line and testing modes. In its knowledge base, operator and plant actions pertaining to the Emergency Operating Procedure(EOP) A-01, are encoded. This is a procedure driven by a reactor's coolant level and pressure signals; with the purpose of shutting down the reactor, maintaining adequate core cooling and reducing the reactor pressure and temperature to cold shutdown conditions ( about 90 to 200 °F). The monitoring of the procedure is performed from the perspective of Emergency Preparedness. Two major issues are addressed in this system. First, the management of the short-term or working memory of the system. LASALLE1 must reach its inferences, display its conclusion and update a message file every two minutes before a new set of data arrives from the plant. This was achieved by superimposing additional layers of control over the inferencing strategies inherent in OPS5, and developing special rules for the management of the used or outdated information. The second issue is the representation of information and its uncertainty. The concepts of information granularity and performance-level, which are based on a coupling of Probability Theory and the theory of Fuzzy Sets, are used for this purpose. The estimation of the performance-level incorporates a mathematical methodology which accounts for two types of uncertainty encountered in monitoring physical systems: Random uncertainty, in the form of of probability density functions generated by observations, measurements and sensors data and fuzzy uncertainty represented by membership functions based on symbolic , stochastic or numerical models estimating the "plausible", "possible" or "expected" values of the system parameters. Examples from both the on-line mode and the testing mode of the system will be discussed to illustrate the present methodology.

Stratiform zinc-lead mineralization in Nasina assemblage rocks of the Yukon-Tanana Upland in east-central Alaska

USGS Publications Warehouse

Dusel-Bacon, Cynthia; Bressler, Jason R.; Takaoka, Hidetoshi; Mortensen, James K.; Oliver, Douglas H.; Leventhal, Joel S.; Newberry, Rainer J.; Bundtzen, Thomas K.

1998-01-01

The Yukon-Tanana Upland of east-central Alaska and Yukon comprises thrust sheets of ductilely deformed metasedimentary and metaigneous rocks of uncertain age and origin that are overlain by klippen of weakly metamorphosed oceanic rocks of the Seventymile-Slide Mountain terrane, and intruded by post-kinematic Early Jurassic, Cretaceous and Tertiary granitoids. Metamorphosed continental margin strata in the Yukon-Tanana Upland of east-central Alaska are thought to be correlative, on the basis of stratigraphic similarities and sparse Mississippian U-Pb zircon and fossil ages (Mortensen, 1992), with middle Paleozoic metasedimentary and metavolcanic rocks in the eastern Alaska Range and in western and southeastern Yukon. Furthermore, rocks in the northern Yukon-Tanana Upland may correlate across the Tintina fault with unmetamorphosed counterparts in the Selwyn Basin (Murphy and Abbott, 1995). Volcanic-hosted (VMS) and sedimentary exhalative (sedex) massive sulfide occurrences are widely reported for these other areas (green-colored unit of fig. 1) but, as yet, have not been documented in the Alaskan part of the Yukon-Tanana Upland. Recent discoveries of VMS deposits in Devono-Mississippian metavolcanic rocks in the Finlayson Lake area of southeastern Yukon (Hunt, 1997) have increased the potential for finding VMS deposits in rocks of similar lithology and age in the Yukon-Tanana Upland of Alaska. Restoration of 450 km of early Tertiary dextral movement along the Tintina fault juxtaposes these two areas.

Effect of binasal occlusion (BNO) and base-in prisms on the visual-evoked potential (VEP) in mild traumatic brain injury (mTBI).

PubMed

Yadav, Naveen K; Ciuffreda, Kenneth J

2014-01-01

To assess quantitatively the effect and relative contribution of binasal occlusion (BNO) and base-in prisms (BI) on visually-evoked potential (VEP) responsivity in persons with mild traumatic brain injury (mTBI) and the symptom of visual motion sensitivity (VMS), as well as in visually-normal (VN) individuals. Subjects were comprised of 20 VN adults and 15 adults with mTBI and VMS. There were four test conditions: (1) conventional pattern VEP, which served as the baseline comparison condition; (2) VEP with BNO alone; (3) VEP with 2 pd BI prisms before each eye; and (4) VEP with the above BNO and BI prism combination. In mTBI, the mean VEP amplitude increased significantly in nearly all subjects (∼90%) with BNO alone. In contrast, in VN, it decreased significantly with BNO alone in all subjects (100%), as compared to the other test conditions. These objective findings were consistent with improvements in visual impressions and sensorimotor tasks in the group with mTBI. Latency remained within normal limits under all test conditions in both groups. Only the BNO condition demonstrated significant, but opposite and consistent, directional effects on the VEP amplitude in both groups. The BNO-VEP test condition may be used clinically for the objectively-based, differential diagnosis of persons suspected of having mTBI and VMS from the VNs.

Effect of binasal occlusion (BNO) on the visual-evoked potential (VEP) in mild traumatic brain injury (mTBI).

PubMed

Ciuffreda, Kenneth J; Yadav, Naveen K; Ludlam, Diana P

2013-01-01

The purpose of the experiment was to assess the effect of binasal occlusion (BNO) on the visually-evoked potential (VEP) in visually-normal (VN) individuals and in those with mild traumatic brain injury (mTBI) for whom BNO frequently reduces their primary symptoms related to abnormally-increased visual motion sensitivity (VMS). Subjects were comprised of asymptomatic VN adults (n = 10) and individuals with mTBI (n = 10) having the symptom of VMS. Conventional full-field VEP testing was employed under two conditions: without BNO and with opaque BNO which blocked regions on either side of the VEP test stimulus. Subjective impressions were also assessed. In VN, the mean VEP amplitude decreased significantly with BNO in all subjects. In contrast, in mTBI, the mean VEP amplitude increased significantly with BNO in all subjects. Latency was normal and unaffected in all cases. Repeat VEP testing in three subjects from each group revealed similar test-re-test findings. Visuomotor activities improved, with reduced symptoms, with BNO in the mTBI group. It is speculated that individuals with mTBI habitually attempt to suppress visual information in the near retinal periphery to reduce their abnormal VMS, with addition of the BNO negating the suppressive influence and thus producing a widespread disinhibition effect and resultant increase in VEP amplitude.

Mercury⊕: An evidential reasoning image classifier

NASA Astrophysics Data System (ADS)

Peddle, Derek R.

1995-12-01

MERCURY⊕ is a multisource evidential reasoning classification software system based on the Dempster-Shafer theory of evidence. The design and implementation of this software package is described for improving the classification and analysis of multisource digital image data necessary for addressing advanced environmental and geoscience applications. In the remote-sensing context, the approach provides a more appropriate framework for classifying modern, multisource, and ancillary data sets which may contain a large number of disparate variables with different statistical properties, scales of measurement, and levels of error which cannot be handled using conventional Bayesian approaches. The software uses a nonparametric, supervised approach to classification, and provides a more objective and flexible interface to the evidential reasoning framework using a frequency-based method for computing support values from training data. The MERCURY⊕ software package has been implemented efficiently in the C programming language, with extensive use made of dynamic memory allocation procedures and compound linked list and hash-table data structures to optimize the storage and retrieval of evidence in a Knowledge Look-up Table. The software is complete with a full user interface and runs under Unix, Ultrix, VAX/VMS, MS-DOS, and Apple Macintosh operating system. An example of classifying alpine land cover and permafrost active layer depth in northern Canada is presented to illustrate the use and application of these ideas.

Mineral potential for volcanogenic massive sulfide deposits in the Islamic Republic of Mauritania, (phase V, deliverable 77): Chapter L in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

USGS Publications Warehouse

Taylor, Cliff D.; Giles, Stuart A.

2015-01-01

Potential for base- and precious-metal-bearing volcanogenic massive sulfide deposits (VMS) exists in Mauritania in the greenstone belts of the southwestern Rgueïbat Shield and in the allochthonous portions of the central and southern Mauritanides. Additional potential exists for VMS deposits within the Tiris Complex of the central Rgueïbat Shield. Volcanosedimentary successions of Paleoproterozoic rocks of the northeastern portion of the Rgueïbat Shield are also permissive for volcanogenic massive sulfide deposits. These types of mineral occurrences are common features of marine volcanosedimentary successions worldwide and can be of almost any age, although Proterozoic examples are less abundant.

Birth-related expression of c-fos, c-jun and substance P mRNAs in the rat brainstem and pia mater: possible relationship to changes in central chemosensitivity.

PubMed

Wickström, H R; Holgert, H; Hökfelt, T; Lagercrantz, H

1999-02-05

In situ hybridization was used to characterize respiration-related areas of the brainstem activated around the time of birth as well as their postnatal sensitivity to CO2. Levels of mRNA corresponding to the immediate early genes (IEG), c-fos and c-jun, and of substance P precursor, ppt-A, were determined in rat fetuses (E21) and neonatal pups (1 h, 1 day and 6 days after normal birth) and after exposure to hypercapnia (12% CO2 for 1 h). Transient increases in c-fos mRNA were observed in the central chemoreceptor area of the ventral medullary surface (VMS), in the lateral reticular nucleus (LRN), in the nucleus of the solitary tract (NTS), and in the nucleus raphé pallidus (RPA) 1 h after birth. Increased expression of c-fos mRNA in the VMS could also be evoked by hypercapnia and this response was particularly pronounced 1 day after birth. On the other hand, c-jun mRNA could be detected already at E21 in the hypoglossal nucleus (XII) and LRN and these levels were not significantly altered at 1 h after birth. There was, however, an increase in the expression of c-jun mRNA in the pia mater surrounding the brainstem after birth. At 1 day after birth, c-jun mRNA levels had decreased in the LRN and pia mater, and later on (6 days after birth) in XII. Furthermore, the ppt-A mRNA level in NTS increased immediately after birth and remained high 1 and 6 days later. These results suggest that (a) the central chemoreceptor area of the VMS, as well as the NTS, LRN, RPA and pia mater are activated following birth; (b) the VMS, but not the other structures examined, can be activated immediately after birth by hypercapnia; and (c) increased expression of ppt-A mRNA may be related to the transition of respiratory control at birth. Copyright 1998 Elsevier Science B.V.

Continuous monitoring of water flow and solute transport using vadose zone monitoring technology

NASA Astrophysics Data System (ADS)

Dahan, O.

2009-04-01

Groundwater contamination is usually attributed to pollution events that initiate on land surface. These may be related to various sources such as industrial, urban or agricultural, and may appear as point or non point sources, through a single accidental event or a continuous pollution process. In all cases, groundwater pollution is a consequence of pollutant transport processes that take place in the vadose zone above the water table. Attempts to control pollution events and prevent groundwater contamination usually involve groundwater monitoring programs. This, however, can not provide any protection against contamination since pollution identification in groundwater is clear evidence that the groundwater is already polluted and contaminants have already traversed the entire vadose zone. Accordingly, an efficient monitoring program that aims at providing information that may prevent groundwater pollution has to include vadose-zone monitoring systems. Such system should provide real-time information on the hydrological and chemical properties of the percolating water and serve as an early warning system capable of detecting pollution events in their early stages before arrival of contaminants to groundwater. Recently, a vadose-zone monitoring system (VMS) was developed to allow continuous monitoring of the hydrological and chemical properties of percolating water in the deep vadose zone. The VMS includes flexible time-domain reflectometry (FTDR) probes for continuous tracking of water content profiles, and vadose-zone sampling ports (VSPs) for frequent sampling of the deep vadose pore water at multiple depths. The monitoring probes and sampling ports are installed through uncased slanted boreholes using a flexible sleeve that allows attachment of the monitoring devices to the borehole walls while achieving good contact between the sensors and the undisturbed sediment column. The system has been successfully implemented in several studies on water flow and contaminant transport in various hydrological and geological setups. These include floodwater infiltration in arid environments, land use impact on groundwater quality, and control of remediation process in a contaminated vadose zone. The data which is collected by the VMS allows direct measurements of flow velocities and fluxes in the vadose zone while continuously monitoring the chemical evolution of the percolating water. While real time information on the hydrological and chemical properties of the percolating water in the vadose is essential to prevent groundwater contamination it is also vital for any remediation actions. Remediation of polluted soils and aquifers essentially involves manipulation of surface and subsurface hydrological, physical and biochemical conditions to improve pollutant attenuation. Controlling the biochemical conditions to enhance biodegradation often includes introducing degrading microorganisms, applying electron donors or acceptors, or adding nutrients that can promote growth of the desired degrading organisms. Accordingly real time data on the hydrological and chemical properties of the vadose zone may be used to select remediation strategies and determine its efficiency on the basis of real time information.

Workflow as a Service in the Cloud: Architecture and Scheduling Algorithms.

PubMed

Wang, Jianwu; Korambath, Prakashan; Altintas, Ilkay; Davis, Jim; Crawl, Daniel

2014-01-01

With more and more workflow systems adopting cloud as their execution environment, it becomes increasingly challenging on how to efficiently manage various workflows, virtual machines (VMs) and workflow execution on VM instances. To make the system scalable and easy-to-extend, we design a Workflow as a Service (WFaaS) architecture with independent services. A core part of the architecture is how to efficiently respond continuous workflow requests from users and schedule their executions in the cloud. Based on different targets, we propose four heuristic workflow scheduling algorithms for the WFaaS architecture, and analyze the differences and best usages of the algorithms in terms of performance, cost and the price/performance ratio via experimental studies.

78 FR 79402 - New England Fishery Management Council; Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-30

...The New England Fishery Management Council's (Council) Joint VMS/Enforcement Committee and Advisory Panel will meet to consider actions affecting New England fisheries in the exclusive economic zone (EEZ).

76 FR 63285 - New England Fishery Management Council; Public Meeting; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-12

...The New England Fishery Management Council's (Council) VMS/ Enforcement Committee and Advisory Panel will meet to consider actions affecting New England fisheries in the exclusive economic zone (EEZ).

Dynamic Allocation of SPM Based on Time-Slotted Cache Conflict Graph for System Optimization

NASA Astrophysics Data System (ADS)

Wu, Jianping; Ling, Ming; Zhang, Yang; Mei, Chen; Wang, Huan

This paper proposes a novel dynamic Scratch-pad Memory allocation strategy to optimize the energy consumption of the memory sub-system. Firstly, the whole program execution process is sliced into several time slots according to the temporal dimension; thereafter, a Time-Slotted Cache Conflict Graph (TSCCG) is introduced to model the behavior of Data Cache (D-Cache) conflicts within each time slot. Then, Integer Nonlinear Programming (INP) is implemented, which can avoid time-consuming linearization process, to select the most profitable data pages. Virtual Memory System (VMS) is adopted to remap those data pages, which will cause severe Cache conflicts within a time slot, to SPM. In order to minimize the swapping overhead of dynamic SPM allocation, a novel SPM controller with a tightly coupled DMA is introduced to issue the swapping operations without CPU's intervention. Last but not the least, this paper discusses the fluctuation of system energy profit based on different MMU page size as well as the Time Slot duration quantitatively. According to our design space exploration, the proposed method can optimize all of the data segments, including global data, heap and stack data in general, and reduce the total energy consumption by 27.28% on average, up to 55.22% with a marginal performance promotion. And comparing to the conventional static CCG (Cache Conflicts Graph), our approach can obtain 24.7% energy profit on average, up to 30.5% with a sight boost in performance.

VIRTUAL FRAME BUFFER INTERFACE

NASA Technical Reports Server (NTRS)

Wolfe, T. L.

1994-01-01

Large image processing systems use multiple frame buffers with differing architectures and vendor supplied user interfaces. This variety of architectures and interfaces creates software development, maintenance, and portability problems for application programs. The Virtual Frame Buffer Interface program makes all frame buffers appear as a generic frame buffer with a specified set of characteristics, allowing programmers to write code which will run unmodified on all supported hardware. The Virtual Frame Buffer Interface converts generic commands to actual device commands. The virtual frame buffer consists of a definition of capabilities and FORTRAN subroutines that are called by application programs. The virtual frame buffer routines may be treated as subroutines, logical functions, or integer functions by the application program. Routines are included that allocate and manage hardware resources such as frame buffers, monitors, video switches, trackballs, tablets and joysticks; access image memory planes; and perform alphanumeric font or text generation. The subroutines for the various "real" frame buffers are in separate VAX/VMS shared libraries allowing modification, correction or enhancement of the virtual interface without affecting application programs. The Virtual Frame Buffer Interface program was developed in FORTRAN 77 for a DEC VAX 11/780 or a DEC VAX 11/750 under VMS 4.X. It supports ADAGE IK3000, DEANZA IP8500, Low Resolution RAMTEK 9460, and High Resolution RAMTEK 9460 Frame Buffers. It has a central memory requirement of approximately 150K. This program was developed in 1985.

Using Dynamic Interface Modeling and Simulation to Develop a Launch and Recovery Flight Simulation for a UH-60A Blackhawk

NASA Technical Reports Server (NTRS)

Sweeney, Christopher; Bunnell, John; Chung, William; Giovannetti, Dean; Mikula, Julie; Nicholson, Bob; Roscoe, Mike

2001-01-01

Joint Shipboard Helicopter Integration Process (JSHIP) is a Joint Test and Evaluation (JT&E) program sponsored by the Office of the Secretary of Defense (OSD). Under the JSHDP program is a simulation effort referred to as the Dynamic Interface Modeling and Simulation System (DIMSS). The purpose of DIMSS is to develop and test the processes and mechanisms that facilitate ship-helicopter interface testing via man-in-the-loop ground-based flight simulators. Specifically, the DIMSS charter is to develop an accredited process for using a flight simulator to determine the wind-over-the-deck (WOD) launch and recovery flight envelope for the UH-60A ship/helicopter combination. DIMSS is a collaborative effort between the NASA Ames Research Center and OSD. OSD determines the T&E and warfighter training requirements, provides the programmatics and dynamic interface T&E experience, and conducts ship/aircraft interface tests for validating the simulation. NASA provides the research and development element, simulation facility, and simulation technical experience. This paper will highlight the benefits of the NASA/JSHIP collaboration and detail achievements of the project in terms of modeling and simulation. The Vertical Motion Simulator (VMS) at NASA Ames Research Center offers the capability to simulate a wide range of simulation cueing configurations, which include visual, aural, and body-force cueing devices. The system flexibility enables switching configurations io allow back-to-back evaluation and comparison of different levels of cueing fidelity in determining minimum training requirements. The investigation required development and integration of several major simulation system at the VMS. A new UH-60A BlackHawk interchangeable cab that provides an out-the-window (OTW) field-of-view (FOV) of 220 degrees in azimuth and 70 degrees in elevation was built. Modeling efforts involved integrating Computational Fluid Dynamics (CFD) generated data of an LHA ship airwake and integrating a real-time ship motion model developed based on a batch model from Naval Surface Warfare Center. Engineering development and integration of a three degrees-of-freedom (DOF) dynamic seat to simulate high frequency rotor-dynamics dependent motion cues for use in conjunction with the large motion system was accomplished. The development of an LHA visual model in several different levels of resolution and an aural cueing system in which three separate fidelity levels could be selected were developed. VMS also integrated a PC-based E&S simFUSION system to investigate cost effective IG alternatives. The DIMSS project consists of three phases that follow an approved Validation, Verification and accreditation (VV&A) process. The first phase will support the accreditation of the individual subsystems and models. The second will follow the verification and validation of the integrated subsystems and models, and will address fidelity requirements of the integrated models and subsystems. The third and final phase will allow the verification and validation of the full system integration. This VV&A process will address the utility of the simulated WOD launch and recovery envelope. Simulations supporting the first two stages have been completed and the data is currently being reviewed and analyzed.

Reply to comments on "Volatile methylsiloxanes in personal care products - Using QuEChERS as a "green" analytical approach" published in Talanta 174 (2017) 156-157.

PubMed

Capela, Daniela; Homem, Vera; Alves, Arminda; Santos, Lúcia

2018-03-01

Recently, Pierre Germain from CES - Silicon Europe published a comment on the paper "Volatile methylsiloxanes in personal care products - Using QuEChERS as a "green" analytical approach", raising concerns that the artefacts employed in the analysis of cyclic volatile methylsiloxanes (cVMS) were not adequately controlled, while using this example as an opportunity to emphasize the difficulties associated with siloxanes analyses in complex matrices such as personal care products (PCPs). We are now addressing these concerns and conveying some clarifications regarding the experiments performed to validate the analytical method adequately. Those details were not included in the original publication because the objective was the quantification of VMS in several PCPs. Copyright © 2017 Elsevier B.V. All rights reserved.

Virtualization of open-source secure web services to support data exchange in a pediatric critical care research network

PubMed Central

Sward, Katherine A; Newth, Christopher JL; Khemani, Robinder G; Cryer, Martin E; Thelen, Julie L; Enriquez, Rene; Shaoyu, Su; Pollack, Murray M; Harrison, Rick E; Meert, Kathleen L; Berg, Robert A; Wessel, David L; Shanley, Thomas P; Dalton, Heidi; Carcillo, Joseph; Jenkins, Tammara L; Dean, J Michael

2015-01-01

Objectives To examine the feasibility of deploying a virtual web service for sharing data within a research network, and to evaluate the impact on data consistency and quality. Material and Methods Virtual machines (VMs) encapsulated an open-source, semantically and syntactically interoperable secure web service infrastructure along with a shadow database. The VMs were deployed to 8 Collaborative Pediatric Critical Care Research Network Clinical Centers. Results Virtual web services could be deployed in hours. The interoperability of the web services reduced format misalignment from 56% to 1% and demonstrated that 99% of the data consistently transferred using the data dictionary and 1% needed human curation. Conclusions Use of virtualized open-source secure web service technology could enable direct electronic abstraction of data from hospital databases for research purposes. PMID:25796596

Metallogeny of precious and base metal mineralization in the Murchison Greenstone Belt, South Africa: indications from U-Pb and Pb-Pb geochronology

NASA Astrophysics Data System (ADS)

Jaguin, J.; Poujol, M.; Boulvais, P.; Robb, L. J.; Paquette, J. L.

2012-10-01

The 3.09 to 2.97 Ga Murchison Greenstone Belt is an important metallotect in the northern Kaapvaal Craton (South Africa), hosting several precious and base metal deposits. Central to the metallotect is the Antimony Line, striking ENE for over 35 km, which hosts a series of structurally controlled Sb-Au deposits. To the north of the Antimony Line, hosted within felsic volcanic rocks, is the Copper-Zinc Line where a series of small, ca. 2.97 Ga Cu-Zn volcanogenic massive sulfide (VMS)-type deposits occur. New data are provided for the Malati Pump gold mine, located at the eastern end of the Antimony Line. Crystallizations of a granodiorite in the Malati Pump Mine and of the Baderoukwe granodiorite are dated at 2,964 ± 7 and 2,970 ± 7 Ma, respectively (zircon U-Pb), while pyrite associated with gold mineralization yielded a Pb-Pb age of 2,967 ± 48 Ma. Therefore, granodiorite emplacement, sulfide mineral deposition and gold mineralization all happened at ca. 2.97 Ga. It is, thus, suggested that the major styles of orogenic Au-Sb and the Cu-Zn VMS mineralization in the Murchison Greenstone Belt are contemporaneous and that the formation of meso- to epithermal Au-Sb mineralization at fairly shallow levels was accompanied by submarine extrusion of felsic volcanic rocks to form associated Cu-Zn VMS mineralization.

Development of an improved rapid BACpro® protocol and a method for direct identification from blood-culture-positive bottles using matrix-assisted laser desorption ionization time-of-flight mass spectrometry.

PubMed

Yonezawa, Takatoshi; Watari, Tomohisa; Ashizawa, Kazuho; Hanada, Daisuke; Yanagiya, Takako; Watanabe, Naoki; Terada, Takashi; Tomoda, Yutaka; Fujii, Satoshi

2018-05-01

Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) has been incorporated into pathogenic bacterial identification methods and has improved their rapidity. Various methods have been reported to directly identify bacteria with MALDI-TOF MS by pretreating culture medium in blood culture bottles. Rapid BACpro® (Nittobo Medical Co., Ltd.) is a pretreatment kit for effective collection of bacteria with cationic copolymers. However, the Rapid BACpro® pretreatment kit is adapted only for MALDI Biotyper (Bruker Daltonics K.K.), and there has been a desire to expand its use to VITEK MS (VMS; bioMerieux SA). We improved the protocol and made it possible to analyze with VMS. The culture medium bacteria collection method was changed to a method with centrifugation after hemolysis using saponin; the cationic copolymer concentration was changed to 30% of the original concentration; the sequence with which reagents were added was changed; and a change was made to an ethanol/formic acid extraction method. The improved protocol enhanced the identification performance. When VMS was used, the identification rate was 100% with control samples. With clinical samples, the identification agreement rate with the cell smear method was 96.3%. The improved protocol is effective in blood culture rapid identification, being both simpler and having an improved identification performance compared with the original. Copyright © 2018 Elsevier B.V. All rights reserved.

JCMT observatory control system

NASA Astrophysics Data System (ADS)

Rees, Nicholas P.; Economou, Frossie; Jenness, Tim; Kackley, Russell D.; Walther, Craig A.; Dent, William R. F.; Folger, Martin; Gao, Xiaofeng; Kelly, Dennis; Lightfoot, John F.; Pain, Ian; Hovey, Gary J.; Redman, Russell O.

2002-12-01

The JCMT, the world's largest sub-mm telescope, has had essentially the same VAX/VMS based control system since it was commissioned. For the next generation of instrumentation we are implementing a new Unix/VxWorks based system, based on the successful ORAC system that was recently released on UKIRT. The system is now entering the integration and testing phase. This paper gives a broad overview of the system architecture and includes some discussion on the choices made. (Other papers in this conference cover some areas in more detail). The basic philosophy is to control the sub-systems with a small and simple set of commands, but passing detailed XML configuration descriptions along with the commands to give the flexibility required. The XML files can be passed between various layers in the system without interpretation, and so simplify the design enormously. This has all been made possible by the adoption of an Observation Preparation Tool, which essentially serves as an intelligent XML editor.

Spacecraft Orbit Design and Analysis (SODA), version 1.0 user's guide

NASA Technical Reports Server (NTRS)

Stallcup, Scott S.; Davis, John S.

1989-01-01

The Spacecraft Orbit Design and Analysis (SODA) computer program, Version 1.0 is described. SODA is a spaceflight mission planning system which consists of five program modules integrated around a common database and user interface. SODA runs on a VAX/VMS computer with an EVANS & SUTHERLAND PS300 graphics workstation. BOEING RIM-Version 7 relational database management system performs transparent database services. In the current version three program modules produce an interactive three dimensional (3D) animation of one or more satellites in planetary orbit. Satellite visibility and sensor coverage capabilities are also provided. One module produces an interactive 3D animation of the solar system. Another module calculates cumulative satellite sensor coverage and revisit time for one or more satellites. Currently Earth, Moon, and Mars systems are supported for all modules except the solar system module.

OCCAM: a flexible, multi-purpose and extendable HPC cluster

NASA Astrophysics Data System (ADS)

Aldinucci, M.; Bagnasco, S.; Lusso, S.; Pasteris, P.; Rabellino, S.; Vallero, S.

2017-10-01

The Open Computing Cluster for Advanced data Manipulation (OCCAM) is a multipurpose flexible HPC cluster designed and operated by a collaboration between the University of Torino and the Sezione di Torino of the Istituto Nazionale di Fisica Nucleare. It is aimed at providing a flexible, reconfigurable and extendable infrastructure to cater to a wide range of different scientific computing use cases, including ones from solid-state chemistry, high-energy physics, computer science, big data analytics, computational biology, genomics and many others. Furthermore, it will serve as a platform for R&D activities on computational technologies themselves, with topics ranging from GPU acceleration to Cloud Computing technologies. A heterogeneous and reconfigurable system like this poses a number of challenges related to the frequency at which heterogeneous hardware resources might change their availability and shareability status, which in turn affect methods and means to allocate, manage, optimize, bill, monitor VMs, containers, virtual farms, jobs, interactive bare-metal sessions, etc. This work describes some of the use cases that prompted the design and construction of the HPC cluster, its architecture and resource provisioning model, along with a first characterization of its performance by some synthetic benchmark tools and a few realistic use-case tests.

FTC - THE FAULT-TREE COMPILER (VAX VMS VERSION)

NASA Technical Reports Server (NTRS)

Butler, R. W.

1994-01-01

FTC, the Fault-Tree Compiler program, is a tool used to calculate the top-event probability for a fault-tree. Five different gate types are allowed in the fault tree: AND, OR, EXCLUSIVE OR, INVERT, and M OF N. The high-level input language is easy to understand and use. In addition, the program supports a hierarchical fault tree definition feature which simplifies the tree-description process and reduces execution time. A rigorous error bound is derived for the solution technique. This bound enables the program to supply an answer precisely (within the limits of double precision floating point arithmetic) at a user-specified number of digits accuracy. The program also facilitates sensitivity analysis with respect to any specified parameter of the fault tree such as a component failure rate or a specific event probability by allowing the user to vary one failure rate or the failure probability over a range of values and plot the results. The mathematical approach chosen to solve a reliability problem may vary with the size and nature of the problem. Although different solution techniques are utilized on different programs, it is possible to have a common input language. The Systems Validation Methods group at NASA Langley Research Center has created a set of programs that form the basis for a reliability analysis workstation. The set of programs are: SURE reliability analysis program (COSMIC program LAR-13789, LAR-14921); the ASSIST specification interface program (LAR-14193, LAR-14923), PAWS/STEM reliability analysis programs (LAR-14165, LAR-14920); and the FTC fault tree tool (LAR-14586, LAR-14922). FTC is used to calculate the top-event probability for a fault tree. PAWS/STEM and SURE are programs which interpret the same SURE language, but utilize different solution methods. ASSIST is a preprocessor that generates SURE language from a more abstract definition. SURE, ASSIST, and PAWS/STEM are also offered as a bundle. Please see the abstract for COS-10039/COS-10041, SARA - SURE/ASSIST Reliability Analysis Workstation, for pricing details. FTC was originally developed for DEC VAX series computers running VMS and was later ported for use on Sun computers running SunOS. The program is written in PASCAL, ANSI compliant C-language, and FORTRAN 77. The TEMPLATE graphics library is required to obtain graphical output. The standard distribution medium for the VMS version of FTC (LAR-14586) is a 9-track 1600 BPI magnetic tape in VMSINSTAL format. It is also available on a TK50 tape cartridge in VMSINSTAL format. Executables are included. The standard distribution medium for the Sun version of FTC (LAR-14922) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. Both Sun3 and Sun4 executables are included. FTC was developed in 1989 and last updated in 1992. DEC, VAX, VMS, and TK50 are trademarks of Digital Equipment Corporation. UNIX is a registered trademark of AT&T Bell Laboratories. SunOS is a trademark of Sun Microsystems, Inc.

Acute Cor Pulmonale and Right Heat Failure Complicating Ethanol Ablative Therapy: Anesthetic and Radiologic Considerations and Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naik, Bhiken, E-mail: bin4n@virginia.edu; Matsumoto, Alan H.

2013-10-15

Ethanol is an effective ablative agent used for the treatment of certain solid organ tumors and vascular malformations (VMs). The egress of ethanol beyond the target tissue can be associated with significant changes to the cardiopulmonary system that can lead to cardiac arrest. This article reviews the contemporary role of ethanol in tumor and VM treatment and discusses the physiological mechanisms of acute pulmonary hypertension and cardiovascular collapse. The importance of periprocedural recognition of the hemodynamic changes that can occur with the use of ethanol and the treatment of this condition are discussed.

Analytic Patch Configuration (APC) gateway version 1.0 user's guide

NASA Technical Reports Server (NTRS)

Bingel, Bradford D.

1990-01-01

The Analytic Patch Configuration (APC) is an interactive software tool which translates aircraft configuration geometry files from one format into another. This initial release of the APC Gateway accommodates six formats: the four accepted APC formats (89f, 89fd, 89u, and 89ud), the PATRAN 2.x phase 1 neutral file format, and the Integrated Aerodynamic Analysis System (IAAS) General Geometry (GG) format. Written in ANSI FORTRAN 77 and completely self-contained, the APC Gateway is very portable and was already installed on CDC/NOS, VAX/VMS, SUN, SGI/IRIS, CONVEX, and GRAY hosts.

Design of overhead VMS structures for fatigue loads.

DOT National Transportation Integrated Search

2011-07-31

The 2001 edition of the American Association of State Highway and Transportation Officials (AASHTO) : Standard Specifications for Structural Supports for Highway Signs, Luminaires and Traffic Signals has been : revised in its entirety through a major...

Spacecraft Orbit Design and Analysis (SODA). Version 2.0: User's guide

NASA Technical Reports Server (NTRS)

Stallcup, Scott S.; Davis, John S.; Zsoldos, Jeffrey S.

1991-01-01

The Spacecraft Orbit Design and Analysis (SODA) computer program, Version 2.0, is discussed. SODA is a spaceflight mission planning system that consists of six program modules integrated around a common database and user interface. SODA runs on a VAX/VMS computer with an Evans and Sutherland PS300 graphics workstation. In the current version, three program modules produce an interactive three dimensional animation of one or more satellites in planetary orbit. Satellite visibility and sensor coverage capabilities are also provided. Circular and rectangular, off nadir, fixed and scanning sensors are supported. One module produces an interactive three dimensional animation of the solar system. Another module calculates cumulative satellite sensor coverage and revisit time for one or more satellites. Currently, Earth, Moon, and Mars systems are supported for all modules except the solar system module.

The metallogeny of Late Triassic rifting of the Alexander terrane in southeastern Alaska and northwestern British Columbia

USGS Publications Warehouse

Taylor, C.D.; Premo, W.R.; Meier, A.L.; Taggart, J.E.

2008-01-01

A belt of unusual volcanogenic massive sulfide (VMS) occurrences is located along the eastern margin of the Alexander terrane throughout southeastern Alaska and northwestern British Columbia and exhibits a range of characteristics consistent with a variety of syngenetic to epigenetic deposit types. Deposits within this belt include Greens Creek and Windy Craggy, the economically most significant VMS deposit in Alaska and the largest in North America, respectively. The occurrences are hosted by a discontinuously exposed, 800-km-long belt of rocks that consist of a 200- to 800-m-thick sequence of conglomerate, limestone, marine elastic sedimentary rocks, and tuff intercalated with and overlain by a distinctive unit of mafic pyroclastic rocks and pillowed flows. Faunal data bracket the age of the host rocks between Anisian (Middle Triassic) and late Norian (late Late Triassic). This metallogenic belt is herein referred to as the Alexander Triassic metallogenic belt. The VMS occurrences show systematic differences in degree of structural control, chemistry, and stratigraphic setting along the Alexander Triassic metallogenic belt that suggest important spatial or temporal changes in the tectonic environment of formation. At the southern end of the belt, felsic volcanic rocks overlain by shallow-water limestones characterize the lower part of the sequence. In the southern and middle portion of the belt, a distinctive pebble conglomerate marks the base of the section and is indicative of high-energy deposition in a near slope or basin margin setting. At the northern end of the belt the conglomerates, limestones, and felsic volcanic rocks are absent and the belt is composed of deep-water sedimentary and mafic volcanic rocks. This northward change in depositional environment and lithofacies is accompanied by a northward transition from epithermal-like structurally controlled, discontinuous, vein- and pod-shaped, Pb-Zn-Ag-Ba-(Cu) occurrences with relatively simple mineralogy, to sulfosalt-enriched VMS occurrences exhibiting characteristics of vein, diagenetic replacement, and exhalative styles of mineralization, and finally to Cu-Zn-(Co-Au) occurrences with larger and more clearly stratiform orebody morphologies. Occurrences in the middle of the belt are transitional in nature between structurally controlled types of mineralization that formed in a shallow-water, near-arc setting, to those having a more stratiform appearance, formed in a deeper water, rift-basin setting. The geologic setting in the south is consistent with shallow subaqueous emplacement on the flanks of the Alexander terrane. Northward, the setting changes to an increasingly deeper back- or intra-arc rift basin. Igneous activity in the Alexander Triassic metallogenic belt is characterized by a bimodal suite of volcanic rocks and a previously unrecognized association with mafic-ultramafic hypabyssal intrusions. Immobile trace and rare earth element (BEE) geochemical data indicate that felsic rocks in the southern portion of the belt are typical calc-alkaline rhyolites, which give way in the middle of the belt to peralkaline rhyolites. Rhyolites are largely absent in the northern part of the belt. Throughout the belt, the capping basaltic rocks have transitional geochemical signatures. Radiogenic isotope data for these rocks are also transitional (basalts and gabbros: ??-Nd = 4-9 and 87Sr/86Sr initial at 215 Ma = 0.7037-0.7074). Together these data are interpreted to reflect variable assimilation of mature island-arc crust by more primitive melts having the characteristics of either mid-ocean ridge (MORB) or intraplate (within-plate) basalts (WPB). The ore and host-rock geochemistry and the sulfosalt-rich mineralogy of the deposits are strikingly similar to recent descriptions of active sea-floor hydrothermal (white smoker) systems in back arcs of the southwest Pacific Ocean. These data, in concert with existing faunal ages, record the formation of a belt of VMS deposits

An Analytical Comparison of the Fidelity of "Large Motion" Versus "Small Motion" Flight Simulators in a Rotorcraft Side-Step Task

NASA Technical Reports Server (NTRS)

Hess, Ronald A.

1999-01-01

This paper presents an analytical and experimental methodology for studying flight simulator fidelity. The task was a rotorcraft bob-up/down maneuver in which vertical acceleration constituted the motion cue. The task considered here is aside-step maneuver that differs from the bob-up one important way: both roll and lateral acceleration cues are available to the pilot. It has been communicated to the author that in some Verticle Motion Simulator (VMS) studies, the lateral acceleration cue has been found to be the most important. It is of some interest to hypothesize how this motion cue associated with "outer-loop" lateral translation fits into the modeling procedure where only "inner-loop " motion cues were considered. This Note is an attempt at formulating such an hypothesis and analytically comparing a large-motion simulator, e.g., the VMS, with a small-motion simulator, e.g., a hexapod.

Monte Carlo Shower Counter Studies

NASA Technical Reports Server (NTRS)

Snyder, H. David

1991-01-01

Activities and accomplishments related to the Monte Carlo shower counter studies are summarized. A tape of the VMS version of the GEANT software was obtained and installed on the central computer at Gallaudet University. Due to difficulties encountered in updating this VMS version, a decision was made to switch to the UNIX version of the package. This version was installed and used to generate the set of data files currently accessed by various analysis programs. The GEANT software was used to write files of data for positron and proton showers. Showers were simulated for a detector consisting of 50 alternating layers of lead and scintillator. Each file consisted of 1000 events at each of the following energies: 0.1, 0.5, 2.0, 10, 44, and 200 GeV. Data analysis activities related to clustering, chi square, and likelihood analyses are summarized. Source code for the GEANT user subprograms and data analysis programs are provided along with example data plots.

xdamp Version 6 : an IDL-based data and image manipulation program.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ballard, William Parker

2012-04-01

The original DAMP (DAta Manipulation Program) was written by Mark Hedemann of Sandia National Laboratories and used the CA-DISSPLA{trademark} (available from Computer Associates International, Inc., Garden City, NY) graphics package as its engine. It was used to plot, modify, and otherwise manipulate the one-dimensional data waveforms (data vs. time) from a wide variety of accelerators. With the waning of CA-DISSPLA and the increasing popularity of Unix(reg sign)-based workstations, a replacement was needed. This package uses the IDL(reg sign) software, available from Research Systems Incorporated, a Xerox company, in Boulder, Colorado, as the engine, and creates a set of widgets tomore » manipulate the data in a manner similar to the original DAMP and earlier versions of xdamp. IDL is currently supported on a wide variety of Unix platforms such as IBM(reg sign) workstations, Hewlett Packard workstations, SUN(reg sign) workstations, Microsoft(reg sign) Windows{trademark} computers, Macintosh(reg sign) computers and Digital Equipment Corporation VMS(reg sign) and Alpha(reg sign) systems. Thus, xdamp is portable across many platforms. We have verified operation, albeit with some minor IDL bugs, on personal computers using Windows 7 and Windows Vista; Unix platforms; and Macintosh computers. Version 6 is an update that uses the IDL Virtual Machine to resolve the need for licensing IDL.« less

Internet-Based Solutions for a Secure and Efficient Seismic Network

NASA Astrophysics Data System (ADS)

Bhadha, R.; Black, M.; Bruton, C.; Hauksson, E.; Stubailo, I.; Watkins, M.; Alvarez, M.; Thomas, V.

2017-12-01

The Southern California Seismic Network (SCSN), operated by Caltech and USGS, leverages modern Internet-based computing technologies to provide timely earthquake early warning for damage reduction, event notification, ShakeMap, and other data products. Here we present recent and ongoing innovations in telemetry, security, cloud computing, virtualization, and data analysis that have allowed us to develop a network that runs securely and efficiently.Earthquake early warning systems must process seismic data within seconds of being recorded, and SCSN maintains a robust and resilient network of more than 350 digital strong motion and broadband seismic stations to achieve this goal. We have continued to improve the path diversity and fault tolerance within our network, and have also developed new tools for latency monitoring and archiving.Cyberattacks are in the news almost daily, and with most of our seismic data streams running over the Internet, it is only a matter of time before SCSN is targeted. To ensure system integrity and availability across our network, we have implemented strong security, including encryption and Virtual Private Networks (VPNs).SCSN operates its own data center at Caltech, but we have also installed real-time servers on Amazon Web Services (AWS), to provide an additional level of redundancy, and eventually to allow full off-site operations continuity for our network. Our AWS systems receive data from Caltech-based import servers and directly from field locations, and are able to process the seismic data, calculate earthquake locations and magnitudes, and distribute earthquake alerts, directly from the cloud.We have also begun a virtualization project at our Caltech data center, allowing us to serve data from Virtual Machines (VMs), making efficient use of high-performance hardware and increasing flexibility and scalability of our data processing systems.Finally, we have developed new monitoring of station average noise levels at most stations. Noise monitoring is effective at identifying anthropogenic noise sources and malfunctioning acquisition equipment. We have built a dynamic display of results with sorting and mapping capabilities that allow us to quickly identify problematic sites and areas with elevated noise.

Workflow as a Service in the Cloud: Architecture and Scheduling Algorithms

PubMed Central

Wang, Jianwu; Korambath, Prakashan; Altintas, Ilkay; Davis, Jim; Crawl, Daniel

2017-01-01

With more and more workflow systems adopting cloud as their execution environment, it becomes increasingly challenging on how to efficiently manage various workflows, virtual machines (VMs) and workflow execution on VM instances. To make the system scalable and easy-to-extend, we design a Workflow as a Service (WFaaS) architecture with independent services. A core part of the architecture is how to efficiently respond continuous workflow requests from users and schedule their executions in the cloud. Based on different targets, we propose four heuristic workflow scheduling algorithms for the WFaaS architecture, and analyze the differences and best usages of the algorithms in terms of performance, cost and the price/performance ratio via experimental studies. PMID:29399237

Developments in Human Centered Cueing Algorithms for Control of Flight Simulator Motion Systems

NASA Technical Reports Server (NTRS)

Houck, Jacob A.; Telban, Robert J.; Cardullo, Frank M.

1997-01-01

The authors conducted further research with cueing algorithms for control of flight simulator motion systems. A variation of the so-called optimal algorithm was formulated using simulated aircraft angular velocity input as a basis. Models of the human vestibular sensation system, i.e. the semicircular canals and otoliths, are incorporated within the algorithm. Comparisons of angular velocity cueing responses showed a significant improvement over a formulation using angular acceleration input. Results also compared favorably with the coordinated adaptive washout algorithm, yielding similar results for angular velocity cues while eliminating false cues and reducing the tilt rate for longitudinal cues. These results were confirmed in piloted tests on the current motion system at NASA-Langley, the Visual Motion Simulator (VMS). Proposed future developments by the authors in cueing algorithms are revealed. The new motion system, the Cockpit Motion Facility (CMF), where the final evaluation of the cueing algorithms will be conducted, is also described.

Multiplexing electro-optic architectures for advanced aircraft integrated flight control systems

NASA Technical Reports Server (NTRS)

Seal, D. W.

1989-01-01

This report describes the results of a 10 month program sponsored by NASA. The objective of this program was to evaluate various optical sensor modulation technologies and to design an optimal Electro-Optic Architecture (EOA) for servicing remote clusters of sensors and actuators in advanced aircraft flight control systems. The EOA's supply optical power to remote sensors and actuators, process the modulated optical signals returned from the sensors, and produce conditioned electrical signals acceptable for use by a digital flight control computer or Vehicle Management System (VMS) computer. This study was part of a multi-year initiative under the Fiber Optic Control System Integration (FOCSI) program to design, develop, and test a totally integrated fiber optic flight/propulsion control system for application to advanced aircraft. Unlike earlier FOCSI studies, this program concentrated on the design of the EOA interface rather than the optical transducer technology itself.

Volatile Methylsiloxanes and Organophosphate Esters in the Eggs of European Starlings (Sturnus vulgaris) and Congeneric Gull Species from Locations across Canada.

PubMed

Lu, Zhe; Martin, Pamela A; Burgess, Neil M; Champoux, Louise; Elliott, John E; Baressi, Enzo; De Silva, Amila O; de Solla, Shane R; Letcher, Robert J

2017-09-05

Volatile methylsiloxanes (VMSs) and organophosphate esters (OPEs) are two suites of chemicals that are of environmental concern as organic contaminants, but little is known about the exposure of wildlife to these contaminants, particularly in birds, in terrestrial and aquatic ecosystems. The present study investigates the spatial distributions of nine cyclic and linear VMSs and 17 OPEs in the eggs of European starlings (Sturnus vulgaris) and three congeneric gull species (i.e., herring gull (Larus argentatus), glaucous-winged gull (L. glaucescens), and California gull (L. californicus)) from nesting sites across Canada. ∑VMS concentrations for all bird eggs were dominated by decamethylcyclopentasiloxane (D5), dodecamethylcyclohexasiloxane (D6), and octamethylcyclotetrasiloxane (D4). With European starlings, birds breeding adjacent to landfill sites had eggs containing significantly greater ∑VMS concentrations (median: 178 ng g -1 wet weight (ww)) compared with those from the urban industrial (20 ng g -1 ww) and rural sites (1.3 ng g -1 ww), indicating that the landfills are important sources of VMSs to Canadian terrestrial environments. In gull eggs, the median ∑VMS concentrations were up to 254 ng g -1 ww and suggested greater detection frequencies and levels of VMSs in aquatic- versus terrestrial-feeding birds in Canada. In contrast, the detection frequency of OPEs in all European starling and gull eggs was lower than 16%. This suggested that low dietary exposure or rapid metabolism of accumulated OPEs occurs in aquatic feeding birds and may warrant further investigation for the elucidation of the reasons for these differences.

A novel hybrid model for air quality index forecasting based on two-phase decomposition technique and modified extreme learning machine.

PubMed

Wang, Deyun; Wei, Shuai; Luo, Hongyuan; Yue, Chenqiang; Grunder, Olivier

2017-02-15

The randomness, non-stationarity and irregularity of air quality index (AQI) series bring the difficulty of AQI forecasting. To enhance forecast accuracy, a novel hybrid forecasting model combining two-phase decomposition technique and extreme learning machine (ELM) optimized by differential evolution (DE) algorithm is developed for AQI forecasting in this paper. In phase I, the complementary ensemble empirical mode decomposition (CEEMD) is utilized to decompose the AQI series into a set of intrinsic mode functions (IMFs) with different frequencies; in phase II, in order to further handle the high frequency IMFs which will increase the forecast difficulty, variational mode decomposition (VMD) is employed to decompose the high frequency IMFs into a number of variational modes (VMs). Then, the ELM model optimized by DE algorithm is applied to forecast all the IMFs and VMs. Finally, the forecast value of each high frequency IMF is obtained through adding up the forecast results of all corresponding VMs, and the forecast series of AQI is obtained by aggregating the forecast results of all IMFs. To verify and validate the proposed model, two daily AQI series from July 1, 2014 to June 30, 2016 collected from Beijing and Shanghai located in China are taken as the test cases to conduct the empirical study. The experimental results show that the proposed hybrid model based on two-phase decomposition technique is remarkably superior to all other considered models for its higher forecast accuracy. Copyright © 2016 Elsevier B.V. All rights reserved.

Modeling and monitoring cyclic and linear volatile methylsiloxanes in a wastewater treatment plant using constant water level sequencing batch reactors.

PubMed

Wang, De-Gao; Du, Juan; Pei, Wei; Liu, Yongjun; Guo, Mingxing

2015-04-15

The fate of cyclic and linear volatile methylsiloxanes (VMSs) was evaluated in a wastewater treatment plant (WWTP) using constant water level sequencing batch reactors from Dalian, China. Influent, effluent, and sewage sludge samples were collected for seven consecutive days. The mean concentrations of cyclic VMSs (cVMSs) in influent and effluent samples are 1.05 μg L(-1) and 0.343 μg L(-1); the total removal efficiency of VMSs is >60%. Linear VMS (lVMS) concentration is under the quantification limitation in aquatic samples but is found in sludge samples with a value of 90 μg kg(-1). High solid-water partition coefficients result in high VMS concentrations in sludge with the mean value of 5030 μg kg(-1). No significant differences of the daily mass flows are found when comparing the concentration during the weekend and during working days. The estimated mass load of total cVMSs is 194 mg d(-1)1000 inhabitants(-1) derived for the population. A mass balance model of the WWTP was developed and derived to simulate the fate of cVMSs. The removal by sorption on sludge increases, and the volatilization decreases with increasing hydrophobicity and decreasing volatility for cVMSs. Sensitivity analysis shows that the total suspended solid concentration in the effluent, mixed liquor suspended solid concentration, the sewage sludge flow rate, and the influent flow rate are the most influential parameters on the mass distribution of cVMSs in this WWTP. Copyright © 2015 Elsevier B.V. All rights reserved.

Kinetics and Mechanism of the Oxidation of Cyclic Methylsiloxanes by Hydroxyl Radical in the Gas Phase: An Experimental and Theoretical Study.

PubMed

Xiao, Ruiyang; Zammit, Ian; Wei, Zongsu; Hu, Wei-Ping; MacLeod, Matthew; Spinney, Richard

2015-11-17

The ubiquitous presence of cyclic volatile methylsiloxanes (cVMS) in the global atmosphere has recently raised environmental concern. In order to assess the persistence and long-range transport potential of cVMS, their second-order rate constants (k) for reactions with hydroxyl radical ((•)OH) in the gas phase are needed. We experimentally and theoretically investigated the kinetics and mechanism of (•)OH oxidation of a series of cVMS, hexamethylcyclotrisiloxane (D3), octamethycyclotetrasiloxane (D4), and decamethycyclopentasiloxane (D5). Experimentally, we measured k values for D3, D4, and D5 with (•)OH in a gas-phase reaction chamber. The Arrhenius activation energies for these reactions in the temperature range from 313 to 353 K were small (-2.92 to 0.79 kcal·mol(-1)), indicating a weak temperature dependence. We also calculated the thermodynamic and kinetic behaviors for reactions at the M06-2X/6-311++G**//M06-2X/6-31+G** level of theory over a wider temperature range of 238-358 K that encompasses temperatures in the troposphere. The calculated Arrhenius activation energies range from -2.71 to -1.64 kcal·mol(-1), also exhibiting weak temperature dependence. The measured k values were approximately an order of magnitude higher than the theoretical values but have the same trend with increasing size of the siloxane ring. The calculated energy barriers for H-atom abstraction at different positions were similar, which provides theoretical support for extrapolating k for other cyclic siloxanes from the number of abstractable hydrogens.

CARE3MENU- A CARE III USER FRIENDLY INTERFACE

NASA Technical Reports Server (NTRS)

Pierce, J. L.

1994-01-01

CARE3MENU generates an input file for the CARE III program. CARE III is used for reliability prediction of complex, redundant, fault-tolerant systems including digital computers, aircraft, nuclear and chemical control systems. The CARE III input file often becomes complicated and is not easily formatted with a text editor. CARE3MENU provides an easy, interactive method of creating an input file by automatically formatting a set of user-supplied inputs for the CARE III system. CARE3MENU provides detailed on-line help for most of its screen formats. The reliability model input process is divided into sections using menu-driven screen displays. Each stage, or set of identical modules comprising the model, must be identified and described in terms of number of modules, minimum number of modules for stage operation, and critical fault threshold. The fault handling and fault occurence models are detailed in several screens by parameters such as transition rates, propagation and detection densities, Weibull or exponential characteristics, and model accuracy. The system fault tree and critical pairs fault tree screens are used to define the governing logic and to identify modules affected by component failures. Additional CARE3MENU screens prompt the user for output options and run time control values such as mission time and truncation values. There are fourteen major screens, many with default values and HELP options. The documentation includes: 1) a users guide with several examples of CARE III models, the dialog required to input them to CARE3MENU, and the output files created; and 2) a maintenance manual for assistance in changing the HELP files and modifying any of the menu formats or contents. CARE3MENU is written in FORTRAN 77 for interactive execution and has been implemented on a DEC VAX series computer operating under VMS. This program was developed in 1985.

Tectonic setting and metallogenesis of volcanogenic massive sulfide deposits in the Bonnifield Mining District, Northern Alaska Range: Chapter B in Recent U.S. Geological Survey studies in the Tintina Gold Province, Alaska, United States, and Yukon, Canada--results of a 5-year project

USGS Publications Warehouse

Dusel-Bacon, Cynthia; Aleinikoff, John N.; Premo, Wayne R.; Paradis, Suzanne; Lohr-Schmidt, Ilana; Gough, Larry P.; Day, Warren C.

2007-01-01

This paper summarizes the results of field and laboratory investigations, including whole-rock geochemistry and radiogenic isotopes, of outcrop and drill core samples from volcanogenic massive sulfide (VMS) deposits and associated metaigneous rocks in the Wood River area of the Bonnifield mining district, northern Alaska Range (see fig. 1 of Editors’ Preface and Overview). U-Pb zircon igneous crystallization ages from felsic rocks indicate a prolonged period of Late Devonian to Early Mississippian (373±3 to 357±4 million years before present, or Ma) magmatism. This magmatism occurred in a basinal setting along the ancient Pacific margin of North America. The siliceous and carbonaceous compositions of metasedimentary rocks, Precambrian model ages based on U-Pb dating of zircon and neodymium ages, and for some units, radiogenic neodymium isotopic compositions and whole-rock trace-element ratios similar to those of continental crust are evidence for this setting. Red Mountain (also known as Dry Creek) and WTF, two of the largest VMS deposits, are hosted in peralkaline metarhyolite of the Mystic Creek Member of the Totatlanika Schist. The Mystic Creek Member is distinctive in having high concentrations of high-field-strength elements (HFSE) and rare-earth elements (REE), indicative of formation in a within-plate (extensional) setting. Mystic Creek metarhyolite is associated with alkalic, within-plate basalt of the Chute Creek Member; neodymium isotopic data indicate an enriched mantle component for both members of this bimodal (rhyolite-basalt) suite. Anderson Mountain, the other significant VMS deposit, is hosted by the Wood River assemblage. Metaigneous rocks in the Wood River assemblage span a wide compositional range, including andesitic rocks, which are characteristic of arc volcanism. Our data suggest that the Mystic Creek Member likely formed in an extensional, back-arc basin that was associated with an outboard continental-margin volcanic arc that included rocks of the Wood River assemblage. We suggest that elevated HFSE and REE trace-element contents of metavolcanic rocks, whose major-element composition may have been altered, are an important prospecting tool for rocks of VMS deposit potential in east-central Alaska.

An easy-to-use diagnostic system development shell

NASA Technical Reports Server (NTRS)

Tsai, L. C.; Ross, J. B.; Han, C. Y.; Wee, W. G.

1987-01-01

The Diagnostic System Development Shell (DSDS), an expert system development shell for diagnostic systems, is described. The major objective of building the DSDS is to create a very easy to use and friendly environment for knowledge engineers and end-users. The DSDS is written in OPS5 and CommonLisp. It runs on a VAX/VMS system. A set of domain independent, generalized rules is built in the DSDS, so the users need not be concerned about building the rules. The facts are explicitly represented in a unified format. A powerful check facility which helps the user to check the errors in the created knowledge bases is provided. A judgement facility and other useful facilities are also available. A diagnostic system based on the DSDS system is question driven and can call or be called by other knowledge based systems written in OPS5 and CommonLisp. A prototype diagnostic system for diagnosing a Philips constant potential X-ray system has been built using the DSDS.

AdA Compiler Validation Summary Report: Certificate Number: 910920W1. 11214 Verdix Corporation, VADS VAX VMS= AMD 29K, VAda-110-03525, Version 6.04, MicroVAX 3600 (Host) to Ironics IV9001 Board (Target). MVME147 (Target)

DTIC Science & Technology

1991-09-20

Agreement Number: 91-07-16- VRX See section 3.1 for any additional information about the testing environment. As a result of this validation effort...Washington DC 20301 92-06991 AVF Control Number: AVF-VSR-511.0292 18 February 1992 91-07-16- VRX Ada COMPILER VALIDATION SUMMARY REPORT: Certificate Number...System: Ironics IV9001 board (AMD 29000) (Am29000 bare VME machine) Customer Agreement Number: 91-07-16- VRX See section 3.1 for any additional information

The Ulysses spacecraft control and monitoring concepts and realities

NASA Technical Reports Server (NTRS)

Hamer, Paul; Angold, Nigel

1993-01-01

Ulysses is a joint ESA-NASA mission, the primary purpose of the mission is to make scientific measurements of the Sun outside the plane of the ecliptic. The delay in launching Ulysses, due to the Challenger disaster, meant that the hardware on which the Spacecraft Control and Monitoring System (SCMS) resides was becoming obsolete, and it was decided to convert SCMS to run on a DEC/VAX machine under VMS. The paper will cover the spacecraft, the conversion, the converted SCMS, problems found, and the upgrades implemented for solutions. It will also discuss the future for and enhancements already made to the converted SCMS.

Some VTOL head-up display drive-law problems and solutions

NASA Technical Reports Server (NTRS)

Merrick, Vernon K.

1993-01-01

A piloted simulation test was conducted on the Ames Research Center's vertical motion simulator (VMS) in support of the Phase 2A flight test of NASA's V/STOL systems research aircraft (VSRA). During the simulation several problems were found with the head-up display (HUD) symbol drive laws and the flightpath synthesis. These problems and the solutions devised to solve them are described. Most of the resulting HUD drive-law changes were implemented during the simulation and their effectiveness was verified. Subsequently both the HUD symbol drive-law and flightpath-synthesis changes were implemented in the VSRA and tested successfully in the Phase 2A flight tests.

ARC-2010-ACD10-0110-076

NASA Image and Video Library

2010-06-09

2010 NASA Honor Awards Awards Group Achievement Award to VMS Space Shuttle Visual Database Development Team. Boris M. Rabin accepting. Presenters are on left Mr. Charles H. Scales, NASA Associate Deputy Administrator, on right Dr. S. Pete Worden, Director, NASA Ames Research Center.

Creating effective variable message signs : human factors issues.

DOT National Transportation Integrated Search

1998-01-01

This report addresses the human factors issues related to the reading and comprehension of variable message sign (VMS) messages. A review of the literature was conducted on factors that affect how people read VMSs. Several topics were reviewed. The f...

EASI - EQUILIBRIUM AIR SHOCK INTERFERENCE

NASA Technical Reports Server (NTRS)

Glass, C. E.

1994-01-01

New research on hypersonic vehicles, such as the National Aero-Space Plane (NASP), has raised concerns about the effects of shock-wave interference on various structural components of the craft. State-of-the-art aerothermal analysis software is inadequate to predict local flow and heat flux in areas of extremely high heat transfer, such as the surface impingement of an Edney-type supersonic jet. EASI revives and updates older computational methods for calculating inviscid flow field and maximum heating from shock wave interference. The program expands these methods to solve problems involving the six shock-wave interference patterns on a two-dimensional cylindrical leading edge with an equilibrium chemically reacting gas mixture (representing, for example, the scramjet cowl of the NASP). The inclusion of gas chemistry allows for a more accurate prediction of the maximum pressure and heating loads by accounting for the effects of high temperature on the air mixture. Caloric imperfections and specie dissociation of high-temperature air cause shock-wave angles, flow deflection angles, and thermodynamic properties to differ from those calculated by a calorically perfect gas model. EASI contains pressure- and temperature-dependent thermodynamic and transport properties to determine heating rates, and uses either a calorically perfect air model or an 11-specie, 7-reaction reacting air model at equilibrium with temperatures up to 15,000 K for the inviscid flowfield calculations. EASI solves the flow field and the associated maximum surface pressure and heat flux for the six common types of shock wave interference. Depending on the type of interference, the program solves for shock-wave/boundary-layer interaction, expansion-fan/boundary-layer interaction, attaching shear layer or supersonic jet impingement. Heat flux predictions require a knowledge (from experimental data or relevant calculations) of a pertinent length scale of the interaction. Output files contain flow-field information for the various shock-wave interference patterns and their associated maximum surface pressure and heat flux predictions. EASI is written in FORTRAN 77 for a DEC VAX 8500 series computer using the VAX/VMS operating system, and requires 75K of memory. The program is available on a 9-track 1600 BPI magnetic tape in DEC VAX BACKUP format. EASI was developed in 1989. DEC, VAX, and VMS are registered trademarks of the Digital Equipment Corporation.

Real-time complex event processing for cloud resources

NASA Astrophysics Data System (ADS)

Adam, M.; Cordeiro, C.; Field, L.; Giordano, D.; Magnoni, L.

2017-10-01

The ongoing integration of clouds into the WLCG raises the need for detailed health and performance monitoring of the virtual resources in order to prevent problems of degraded service and interruptions due to undetected failures. When working in scale, the existing monitoring diversity can lead to a metric overflow whereby the operators need to manually collect and correlate data from several monitoring tools and frameworks, resulting in tens of different metrics to be constantly interpreted and analyzed per virtual machine. In this paper we present an ESPER based standalone application which is able to process complex monitoring events coming from various sources and automatically interpret data in order to issue alarms upon the resources’ statuses, without interfering with the actual resources and data sources. We will describe how this application has been used with both commercial and non-commercial cloud activities, allowing the operators to quickly be alarmed and react to misbehaving VMs and LHC experiments’ workflows. We will present the pattern analysis mechanisms being used, as well as the surrounding Elastic and REST API interfaces where the alarms are collected and served to users.

Palaeoproterozoic Volcanic Massive Sulphides (VMS) in the Lithuanian crystalline basement: evidences for a back-arc tectonic setting

NASA Astrophysics Data System (ADS)

Skridlaite, Grazina; Siliauskas, Laurynas

2014-05-01

In the southwestern part of the East European Craton (EEC), several events of Palaeoproterozoic volcanic arc magmatic activity were recognized in the concealed crystalline basement. In Lithuania, the TTG suites of 1.89 Ga and 1.86-1.84 Ga were later metamorphosed in amphibolite and granulite facies conditions. Remnants of a volcano-sedimentary sequence metamorphosed in green schist and amphibolite facies conditions were discovered in central and southern Lithuania. In southern Lithuania, the upper part of the Lazdijai 13 (Lz13) drilling (at c. 493 m depth) consists of exhalitic quartz chlorite cherts mixed with andesitic rocks. The rocks are impregnated with magnetite in some places replacing calcite. Most of the magnetite grains are overgrown by a dendritic kovelite, which may have formed while magnetite was still in aqueous surrounding. Other accessory minerals are xenotime, zircon, apatite, Sr-Ba sulphates etc. The cherts are underlain by a metaandesite which volcanic structures were obscured by hydrothermal alteration, i.e. the idiomorphic magnetite crystals and porphyritic plagioclase grains were replaced by clay minerals and quartz or muscovite in many places. Thin metamorphosed mudstone layers turned into garnet, biotite (+/-staurolite) and chlorite schists. The rocks were affected by silicification, chloritization, argilitization and carbonatization. Taking into account the rock composition, micro and macro scale alteration zones and absence of breccia, the whole package resembles an outer part of the VMS stockwork. The lower boundary at 526 m is sharp, marked by a quartz vein, below which lies quartz, biotite (+/- chlorite) bearing schist with minor tremolite (former sandstone). It was intensely affected by silicification, and was enriched in Na, K and Ca. Accessory minerals are monazite, xenotime, apatite and detrital zircon. The schist exhibits fine mineral foliation, and is fine-grained. A 4 m thick granitic vein cuts the rock at 654 m depth, below which there are amphibolites with layers or lenses of skarns formed in marbles. Some amphibolites resemble porphyritic basalts. These might be dikes of basalts, which are common for back arc VMS surroundings. The volcano-clastic rock from the Lz13 yielded c. 1.83 Ga and c. 1.80 Ga ages. The whole rock Sm-Nd isotopic composition points towards juvenile origin of the rock (TDM=2.08 Ga, ɛNd (1.9) +1.8). After the comparison of the obtained data set with VMS deposits formed in different environments, it is most likely that the volcano-sedimentary sequence of Lz13 was formed in a back arc tectonic setting. The volcano-sedimentary sequence can be correlated with the 1.83 Ga Oskarshamn-Jönköping Belt (Mansfeld et al., 2005) and the volcano-sedimentary Vetlanda formation (Makowsky and Mansfeld, 2013) in southeastern Sweden. The c. 1.83-1.80 Ga volcanic arc and back-arc system continues from southeastern Sweden through the Baltic Sea to Lithuania. This is a contribution to the Open Access Centre activities Mansfeld, J., Beunk, F.F. and Barling, J., 2005. GFF, 127: 149-157 Makowsky, F., Mansfeld, J., 2013. 31st Nordic Geological Winter Meeting, Lund, Sweden, 89-90.

76 FR 31304 - New England Fishery Management Council; Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-31

... Fishery Management Council; Public Meeting AGENCY: National Marine Fisheries Service (NMFS), National... England Fishery Management Council's (Council) VMS/ Enforcement Committee and Advisory Panel will meet to consider actions affecting New England fisheries in the exclusive economic zone (EEZ). DATES: The meeting...

PAD_AUDIT -- PAD Auditing Package

NASA Astrophysics Data System (ADS)

Clayton, C. A.

The PAD (Packet Assembler Disassembler) utility is the part of the VAX/VMS Coloured Book Software (CBS) which allows a user to log onto remote computers from a local VAX. Unfortunately, logging into a computer via either the Packet SwitchStream (PSS) or the International Packet SwitchStream (IPSS) costs real money. Some users either do not appreciate this or do not care and have been known to clock up rather large quarterly bills. This software package allows a system manager to determine who has used PAD to call where and (most importantly) how much it has cost. The system manager can then take appropriate action - either charging the individuals, warning them to use the facility with more care or even denying access to a greedy user to one or more sites.

Assessing inter-laboratory comparability and limits of determination for the analysis of cyclic volatile methyl siloxanes in whole Rainbow Trout (Oncorhynchus mykiss).

PubMed

McGoldrick, Daryl J; Durham, Jeremy; Leknes, Henriette; Kierkegaard, Amelie; Gerhards, Reinhard; Powell, David E; McLachlan, Michael S

2011-11-01

Cyclic volatile methyl siloxanes (cVMS) are high volume production chemicals used in a wide range of industrial and consumer products. Three cVMS compounds (D4, D5, and D6) have and are undergoing environmental risk evaluations in several countries and have been proposed for legal regulation in Canada. As interest in monitoring concentrations of these chemicals in the environment increase, there is a need to evaluate the analytical procedures for cVMS in biological matrices in order to assess the quality of data produced. The purpose of this study was to determine laboratory testing performance for measuring residues of D4, D5, and D6 in a standard set of fish homogenate samples and to estimate limits of determination for each substance. The samples sent to each laboratory consisted of homogenized whole body tissues of hatchery raised rainbow trout which were fed food fortified with D4, D5, and D6 (dosed) and trout that were fed standard food rations (control). The participants analyzed each sample using their analytical method of choice using their own standards and procedures for quantification and quality control. With a few exceptions, participating laboratories generated comparable results for D4, D5, and D6 in both the dosed and control samples having z-scores between 2 and -2. Method detection limits for the whole fish matrix were on average 2.4 ng g(-1) ww for D4, 2.3 ng g(-1) ww for D5, and 1.8 ng g(-1) ww for D6. Crown Copyright © 2011. Published by Elsevier Ltd. All rights reserved.

Distribution characteristics of volatile methylsiloxanes in Tokyo Bay watershed in Japan: Analysis of surface waters by purge and trap method.

PubMed

Horii, Yuichi; Minomo, Kotaro; Ohtsuka, Nobutoshi; Motegi, Mamoru; Nojiri, Kiyoshi; Kannan, Kurunthachalam

2017-05-15

Surface waters including river water and effluent from sewage treatment plants (STPs) were collected from Tokyo Bay watershed, Japan, and analyzed for seven cyclic and linear volatile methylsiloxanes (VMSs), i.e., D3, D4, D5, D6, L3, L4, and L5 by an optimized purge and trap extraction method. The total concentrations of seven VMSs (ΣVMS) in river water ranged from <4.9 to 1700ng/L (mean: 220ng/L). The individual mean concentrations of cyclic VMSs in surface waters were; 10ng/L for D3, 13ng/L for D4, 180ng/L for D5, and 18ng/L for D6. The concentrations of ΣVMS determined in STP effluents varied widely from 99 to 2500ng/L and the individual mean concentrations were 21ng/L for D3, 27ng/L for D4, 540ng/L for D5, and 45ng/L for D6. D5, which is widely used in personal-care products, was found to be the most abundant compound in both river water and STP effluent. Linear VMSs were detected at much lower frequency and concentrations than those of cyclic VMSs. The measured concentrations of D4 were below the no-observed effect concentration (NOEC). The annual emission of ΣVMS through STPs into Tokyo Bay watershed was estimated at 2300kg. Our results indicate widespread distribution of VMSs in Tokyo Bay watershed and the influence of domestic wastewater discharges as a source of VMSs in the aquatic environment. Copyright © 2017 Elsevier B.V. All rights reserved.

Effects of low-dose paroxetine 7.5 mg on weight and sexual function during treatment of vasomotor symptoms associated with menopause

PubMed Central

Portman, David J.; Kaunitz, Andrew M.; Kazempour, Kazem; Mekonnen, Hana; Bhaskar, Sailaja; Lippman, Joel

2014-01-01

Abstract Objective Two phase 3, randomized, placebo-controlled trials demonstrated that low-dose paroxetine 7.5 mg reduced the frequency and severity of vasomotor symptoms (VMS) associated with menopause and had a favorable tolerability profile. The impact of paroxetine 7.5 mg on body weight and sexual function was evaluated in a pooled analysis. Methods Postmenopausal women aged 40 years or older who had moderate to severe VMS were randomly assigned to receive paroxetine 7.5 mg or placebo once daily for 12 or 24 weeks. Assessments included changes in body mass index (BMI) and weight, Arizona Sexual Experiences Scale score, Hot Flash–Related Daily Interference Scale sexuality subscore, and adverse events related to weight or sexual dysfunction. Results Pooled efficacy and safety populations comprised 1,174 and 1,175 participants, respectively. Baseline values were similar for median weight (∼75 kg), median BMI (∼28 kg/m2), and the proportion of women with sexual dysfunction (∼58%). No clinically meaningful or statistically significant changes from baseline in weight or sexual function assessments occurred in the paroxetine 7.5 mg group. Small but statistically significant increases in weight and BMI were observed in the placebo group only on week 4. No significant difference between treatment groups was observed in the proportion of participants who had 7% or higher gain in body weight on week 4, 12, or 24. Rates of adverse events suggestive of sexual dysfunction were low and similar in both treatment groups. Conclusions Paroxetine 7.5 mg does not cause weight gain or negative changes in libido when used to treat menopause-associated VMS in postmenopausal women. PMID:24552977

Geochemistry and geochronology of carbonate-hosted base metal deposits in the southern Brooks Range, Alaska: temporal association with VMS deposits and metallogenic implications

USGS Publications Warehouse

Kelly, Karen; Slack, John; Selby, David

2009-01-01

The Brooks Range contains enormous accumulations of zinc and copper, either as VMS or sediment-hosted deposits. The Ruby Creek and Omar deposits are Cu-Co stratabound deposits associated with dolomitic breccias. Numerous volcanogenic Cu-Zn (+/-Ag, Au) deposits are situated ~20 km north of the Ruby Creek deposit. The carbonate-hosted deposits consist of chalcopyrite and bornite that fill open spaces, replace the matrix of the breccias, and occur in later cross-cutting veins. Cobaltiferous pyrite, chalcocite, minor tennantite-tetrahedrite, galena, and sphalerite are also present. At Ruby Creek, phases such as carrollite, renierite, and germanite occur rarely. The deposits have undergone post-depositional metamorphism (Ruby Creek, low greenschist facies; Omar, blueschist facies). The unusual geochemical signature includes Cu-Co +/- Ag, As, Au, Bi, Ge, Hg, Sb, and U with sporadic high Re concentrations (up to 2.7 ppm). New Re-Os data were obtained for chalcopyrite, bornite, and pyrite from the Ruby Creek deposit (analyses of sulfides from Omar are in progress). The data show extremely high Re abundances (hundreds of ppb, low ppm) and contain essentially no common Os. The Re-Os data provide the first absolute ages of ore formation for the Ruby Creek deposit and demonstrate that the Re-Os systematics of pyrite, chalcopyrite, and bornite are unaffected by greenschist metamorphism. The Re-Os data show that the main phase of Cu mineralization occurred at 384 +/-4.2 Ma, which coincides with zircon U-Pb ages from igneous rocks that are spatially and genetically associated with VMS deposits. This suggests a temporal link between regional magmatism and hydrothermal mineralization.

Space Station Freedom environmental database system (FEDS) for MSFC testing

NASA Technical Reports Server (NTRS)

Story, Gail S.; Williams, Wendy; Chiu, Charles

1991-01-01

The Water Recovery Test (WRT) at Marshall Space Flight Center (MSFC) is the first demonstration of integrated water recovery systems for potable and hygiene water reuse as envisioned for Space Station Freedom (SSF). In order to satisfy the safety and health requirements placed on the SSF program and facilitate test data assessment, an extensive laboratory analysis database was established to provide a central archive and data retrieval function. The database is required to store analysis results for physical, chemical, and microbial parameters measured from water, air and surface samples collected at various locations throughout the test facility. The Oracle Relational Database Management System (RDBMS) was utilized to implement a secured on-line information system with the ECLSS WRT program as the foundation for this system. The database is supported on a VAX/VMS 8810 series mainframe and is accessible from the Marshall Information Network System (MINS). This paper summarizes the database requirements, system design, interfaces, and future enhancements.

International Solar-Terrestrial Program Key Parameter Visualization Tool Data: USA_NASA_DDF_ISTP_IM_KP_0161

NASA Technical Reports Server (NTRS)

Ocuna, M. H.; Ogilvie, K. W.; Baker, D. N.; Curtis, S. A.; Fairfield, D. H.; Mish, W. H.

2000-01-01

The Global Geospace Science Program (GGS) is designed to improve greatly the understanding of the flow of energy, mass and momentum in the solar-terrestrial environment with particular emphasis on "Geospace". The Global Geospace Science Program is the US contribution to the International Solar-Terrestrial Physics (ISTP) Science Initiative. This CD-ROM issue describes the WIND and POLAR spacecraft, the scientific experiments carried onboard, the Theoretical and Ground Based investigations which constitute the US Global Geospace Science Program and the ISTP Data Systems which support the data acquisition and analysis effort. The International Solar-Terrestrial Physics Program (ISTP) Key Parameter Visualization Tool (KPVT), provided on the CD-ROM, was developed at the ISTP Science Planning and Operations Facility (SPOF). The KPVT is a generic software package for visualizing the key parameter data produced from all ISTP missions, interactively and simultaneously. The tool is designed to facilitate correlative displays of ISTP data from multiple spacecraft and instruments, and thus the selection of candidate events and data quality control. The software, written in IDL, includes a graphical/widget user interface, and runs on many platforms, including various UNIX workstations, Alpha/Open VMS, Macintosh (680x0 and PowerPC), and PC/Windows NT, Windows 3.1, and Windows 95.

International Solar-Terrestrial Program Key Parameter Visualization Tool Data: USA_NASA_DDF_ISTP_KP_0192

NASA Technical Reports Server (NTRS)

Ocuna, M. H.; Ogilvie, K. W.; Baker, D. N.; Curtis, S. A.; Fairfield, D. H.; Mish, W. H.

2001-01-01

The Global Geospace Science Program (GGS) is designed to improve greatly the understanding of the flow of energy, mass and momentum in the solar-terrestrial environment with particular emphasis on "Geospace". The Global Geospace Science Program is the US contribution to the International Solar-Terrestrial Physics (ISTP) Science Initiative. This CD-ROM issue describes the WIND and POLAR spacecraft, the scientific experiments carried onboard, the Theoretical and Ground Based investigations which constitute the US Global Geospace Science Program and the ISTP Data Systems which support the data acquisition and analysis effort. The International Solar-Terrestrial Physics Program (ISTP) Key Parameter Visualization Tool (KPVT), provided on the CD-ROM, was developed at the ISTP Science Planning and Operations Facility (SPOF). The KPVT is a generic software package for visualizing the key parameter data produced from all ISTP missions, interactively and simultaneously. The tool is designed to facilitate correlative displays of ISTP data from multiple spacecraft and instruments, and thus the selection of candidate events and data quality control. The software, written in IDL, includes a graphical/widget user interface, and runs on many platforms, including various UNIX workstations, Alpha/Open VMS, Macintosh (680x0 and PowerPC), and PC/Windows NT, Windows 3.1, and Windows 95.

International Solar-Terrestrial Program Key Parameter Visualization Tool Data: USA_NASA_DDF_ISTP_KP_0139

NASA Technical Reports Server (NTRS)

Ocuna, M. H.; Ogilvie, K. W.; Baker, D. N.; Curtis, S. A.; Fairfield, D. H.; Mish, W. H.

1999-01-01

The Global Geospace Science Program (GGS) is designed to improve greatly the understanding of the flow of energy, mass and momentum in the solar-terrestrial environment with particular emphasis on "Geospace". The Global Geospace Science Program is the US contribution to the International Solar-Terrestrial Physics (ISTP) Science Initiative. This CD-ROM issue describes the WIND and POLAR spacecraft, the scientific experiments carried onboard, the Theoretical and Ground Based investigations which constitute the US Global Geospace Science Program and the ISTP Data Systems which support the data acquisition and analysis effort. The International Solar-Terrestrial Physics Program (ISTP) Key Parameter Visualization Tool (KPVT), provided on the CD-ROM, was developed at the ISTP Science Planning and Operations Facility (SPOF). The KPVT is a generic software package for visualizing the key parameter data produced from all ISTP missions, interactively and simultaneously. The tool is designed to facilitate correlative displays of ISTP data from multiple spacecraft and instruments, and thus the selection of candidate events and data quality control. The software, written in IDL, includes a graphical/widget user interface, and runs on many platforms, including various UNIX workstations, Alpha/Open VMS, Macintosh (680x0 and PowerPC), and PC/Windows NT, Windows 3.1, and Windows 95.

International Solar-Terrestrial Program Key Parameter Visualization Tool Data: USA_NASA_DDF_ISTP_IM_KP_0185

NASA Technical Reports Server (NTRS)

Ocuna, M. H.; Ogilvie, K. W.; Baker, D. N.; Curtis, S. A.; Fairfield, D. H.; Mish, W. H.

2000-01-01

The Global Geospace Science Program (GGS) is designed to improve greatly the understanding of the flow of energy, mass and momentum in the solar-terrestrial environment with particular emphasis on "Geospace". The Global Geospace Science Program is the US contribution to the International Solar-Terrestrial Physics (ISTP) Science Initiative. This CD-ROM issue describes the WIND and POLAR spacecraft, the scientific experiments carried onboard, the Theoretical and Ground Based investigations which constitute the US Global Geospace Science Program and the ISTP Data Systems which support the data acquisition and analysis effort. The International Solar-Terrestrial Physics Program (ISTP) Key Parameter Visualization Tool (KPVT), provided on the CD-ROM, was developed at the ISTP Science Planning and Operations Facility (SPOF). The KPVT is a generic software package for visualizing the key parameter data produced from all ISTP missions, interactively and simultaneously. The tool is designed to facilitate correlative displays of ISTP data from multiple spacecraft and instruments, and thus the selection of candidate events and data quality control. The software, written in IDL, includes a graphical/widget user interface, and runs on many platforms, including various UNIX workstations, Alpha/Open VMS, Macintosh (680x0 and PowerPC), and PC/Windows NT, Windows 3.1, and Windows 95.

ARC-1985-AC85-0569-2

NASA Image and Video Library

1985-08-12

Boeing CH-47B (USA 66-19138 NASA-737) Chinook in-flight simulator with Moffet Field Navy Hangar and Ames VMS in background. Note: Used in publication in Flight Research at Ames; 57 Years of Development and Validation of Aeronautical Technology NASA SP-1998-3300 fig. 133

Preliminary magnetotelluric results across Dalma Volcanics, Eastern India: Inferences on metallogeny

NASA Astrophysics Data System (ADS)

Maurya, Ved P.; Shalivahan; Bhattacharya, B. B.; Adhikari, P. K.; Das, L. K.

2015-04-01

The regional magnetotelluric (MT) survey across Dalma Volcanics (DVs) in North Singhbhum Mobile Belt (NSMB) was carried out to obtain the conductivity model and to understand the metallogeny. The structure in general is 2-D and the average strike is N60°W. 2-D inversions using TE + TM and TE + TM + Tzy were carried out. Both inversions derived models with similar features but with modified shape. The TE + TM + Tzy inversion brings up two conducting zones enveloping three anomalous conducting bodies. Inductively coupled plasma atomic emission spectroscopy (ICP-AES) analysis of the samples collected from 8 to 10 m pit from different stratigraphic units of Dalma volcano-sedimentary belt indicates the presence of gold, silver, uranium and copper. The study area is a felsic dominated rifted margin and shows high conductivity contrast along with high gravity, magnetic and significant radiometric anomaly. Thus, the conducting zones indicate the presence of volcanogenic massive sulfide (VMS) or volcano hosted gold deposit (Au-VMS) in NSMB.

Virtualization of open-source secure web services to support data exchange in a pediatric critical care research network.

PubMed

Frey, Lewis J; Sward, Katherine A; Newth, Christopher J L; Khemani, Robinder G; Cryer, Martin E; Thelen, Julie L; Enriquez, Rene; Shaoyu, Su; Pollack, Murray M; Harrison, Rick E; Meert, Kathleen L; Berg, Robert A; Wessel, David L; Shanley, Thomas P; Dalton, Heidi; Carcillo, Joseph; Jenkins, Tammara L; Dean, J Michael

2015-11-01

To examine the feasibility of deploying a virtual web service for sharing data within a research network, and to evaluate the impact on data consistency and quality. Virtual machines (VMs) encapsulated an open-source, semantically and syntactically interoperable secure web service infrastructure along with a shadow database. The VMs were deployed to 8 Collaborative Pediatric Critical Care Research Network Clinical Centers. Virtual web services could be deployed in hours. The interoperability of the web services reduced format misalignment from 56% to 1% and demonstrated that 99% of the data consistently transferred using the data dictionary and 1% needed human curation. Use of virtualized open-source secure web service technology could enable direct electronic abstraction of data from hospital databases for research purposes. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Design distributed simulation platform for vehicle management system

NASA Astrophysics Data System (ADS)

Wen, Zhaodong; Wang, Zhanlin; Qiu, Lihua

2006-11-01

Next generation military aircraft requires the airborne management system high performance. General modules, data integration, high speed data bus and so on are needed to share and manage information of the subsystems efficiently. The subsystems include flight control system, propulsion system, hydraulic power system, environmental control system, fuel management system, electrical power system and so on. The unattached or mixed architecture is changed to integrated architecture. That means the whole airborne system is regarded into one system to manage. So the physical devices are distributed but the system information is integrated and shared. The process function of each subsystem are integrated (including general process modules, dynamic reconfiguration), furthermore, the sensors and the signal processing functions are shared. On the other hand, it is a foundation for power shared. Establish a distributed vehicle management system using 1553B bus and distributed processors which can provide a validation platform for the research of airborne system integrated management. This paper establishes the Vehicle Management System (VMS) simulation platform. Discuss the software and hardware configuration and analyze the communication and fault-tolerant method.

DET/MPS - THE GSFC ENERGY BALANCE PROGRAM, DIRECT ENERGY TRANSFER/MULTIMISSION SPACECRAFT MODULAR POWER SYSTEM (UNIX VERSION)

NASA Technical Reports Server (NTRS)

Jagielski, J. M.

1994-01-01

The DET/MPS programs model and simulate the Direct Energy Transfer and Multimission Spacecraft Modular Power System in order to aid both in design and in analysis of orbital energy balance. Typically, the DET power system has the solar array directly to the spacecraft bus, and the central building block of MPS is the Standard Power Regulator Unit. DET/MPS allows a minute-by-minute simulation of the power system's performance as it responds to various orbital parameters, focusing its output on solar array output and battery characteristics. While this package is limited in terms of orbital mechanics, it is sufficient to calculate eclipse and solar array data for circular or non-circular orbits. DET/MPS can be adjusted to run one or sequential orbits up to about one week, simulated time. These programs have been used on a variety of Goddard Space Flight Center spacecraft projects. DET/MPS is written in FORTRAN 77 with some VAX-type extensions. Any FORTRAN 77 compiler that includes VAX extensions should be able to compile and run the program with little or no modifications. The compiler must at least support free-form (or tab-delineated) source format and 'do do-while end-do' control structures. DET/MPS is available for three platforms: GSC-13374, for DEC VAX series computers running VMS, is available in DEC VAX Backup format on a 9-track 1600 BPI tape (standard distribution) or TK50 tape cartridge; GSC-13443, for UNIX-based computers, is available on a .25 inch streaming magnetic tape cartridge in UNIX tar format; and GSC-13444, for Macintosh computers running AU/X with either the NKR FORTRAN or AbSoft MacFORTRAN II compilers, is available on a 3.5 inch 800K Macintosh format diskette. Source code and test data are supplied. The UNIX version of DET requires 90K of main memory for execution. DET/MPS was developed in 1990. A/UX and Macintosh are registered trademarks of Apple Computer, Inc. VMS, DEC VAX and TK50 are trademarks of Digital Equipment Corporation. UNIX is a registered trademark of AT&T Bell Laboratories.

DET/MPS - THE GSFC ENERGY BALANCE PROGRAM, DIRECT ENERGY TRANSFER/MULTIMISSION SPACECRAFT MODULAR POWER SYSTEM (MACINTOSH A/UX VERSION)

NASA Technical Reports Server (NTRS)

Jagielski, J. M.

1994-01-01

The DET/MPS programs model and simulate the Direct Energy Transfer and Multimission Spacecraft Modular Power System in order to aid both in design and in analysis of orbital energy balance. Typically, the DET power system has the solar array directly to the spacecraft bus, and the central building block of MPS is the Standard Power Regulator Unit. DET/MPS allows a minute-by-minute simulation of the power system's performance as it responds to various orbital parameters, focusing its output on solar array output and battery characteristics. While this package is limited in terms of orbital mechanics, it is sufficient to calculate eclipse and solar array data for circular or non-circular orbits. DET/MPS can be adjusted to run one or sequential orbits up to about one week, simulated time. These programs have been used on a variety of Goddard Space Flight Center spacecraft projects. DET/MPS is written in FORTRAN 77 with some VAX-type extensions. Any FORTRAN 77 compiler that includes VAX extensions should be able to compile and run the program with little or no modifications. The compiler must at least support free-form (or tab-delineated) source format and 'do do-while end-do' control structures. DET/MPS is available for three platforms: GSC-13374, for DEC VAX series computers running VMS, is available in DEC VAX Backup format on a 9-track 1600 BPI tape (standard distribution) or TK50 tape cartridge; GSC-13443, for UNIX-based computers, is available on a .25 inch streaming magnetic tape cartridge in UNIX tar format; and GSC-13444, for Macintosh computers running AU/X with either the NKR FORTRAN or AbSoft MacFORTRAN II compilers, is available on a 3.5 inch 800K Macintosh format diskette. Source code and test data are supplied. The UNIX version of DET requires 90K of main memory for execution. DET/MPS was developed in 1990. A/UX and Macintosh are registered trademarks of Apple Computer, Inc. VMS, DEC VAX and TK50 are trademarks of Digital Equipment Corporation. UNIX is a registered trademark of AT&T Bell Laboratories.

MultiNet TCP/P/IP for VAX/VMS update

NASA Technical Reports Server (NTRS)

Vance, L. Stuart

1991-01-01

Outlines of device support; DECnet interoperability; installation; MultiNet services; domain name server; Telnet; FTP; SMTP; DECwindows over TCP/IP; BSD r services; remote printing; RPC services and NFS server; NFS client; netcontrol; diagnostics; programming support; and MultiNet features are presented in viewgraph format.

Fatigue performance of variable message sign & luminaire support structures : volume II, fatigue related wind loads on highway support structures.

DOT National Transportation Integrated Search

1998-05-01

In Order to determine equivalent static pressures for fatigue loads on cantilevered highway support structures a : cantilevered Variable Message Sign(VMS) located along Interstate westbound at mile marker 48.5 in northern : New Jersey was continuousl...

77 FR 50472 - New England Fishery Management Council; Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-21

... Region Logbook Family of Forms Federal Register (77 FR 153, 8/8/12). Other business may be discussed. The... Fishery Management Council; Public Meeting AGENCY: National Marine Fisheries Service (NMFS), National... England Fishery Management Council's (Council) VMS/ Enforcement Committee and Advisory Panel will meet to...

Fatigue performance of variable message sign & luminaire support structures : volume I, fatigue related wind loads on highway support structures

DOT National Transportation Integrated Search

1998-04-01

In Order to determine equivalent static pressures for fatigue loads on cantilevered highway support structures a : cantilevered Variable Message Sign(VMS) located along Interstate westbound at mile marker 48.5 in northern : New Jersey was continuousl...

Geology, ore facies and sulfur isotopes geochemistry of the Nudeh Besshi-type volcanogenic massive sulfide deposit, southwest Sabzevar basin, Iran

NASA Astrophysics Data System (ADS)

Maghfouri, Sajjad; Rastad, Ebrahim; Mousivand, Fardin; Lin, Ye; Zaw, Khin

2016-08-01

The southwest Sabzevar basin is placed in the southwestern part of a crustal domain known as the Sabzevar zone, at the north of Central Iranian microcontinent. This basin hosts abundant mineral deposits; particularly of the Mn exhalative and Cu-Zn volcanogenic massive sulfide (VMS) types. The evolution of this basin is governed by the Neo-tethys oceanic crust subduction beneath the Central Iranian microcontinent and by the resulting continental arc (Sanandaj-Sirjan) and back-arc (Sabzevar-Naien). This evolution followed two major sequences: (I) Lower Late Cretaceous Volcano-Sedimentary Sequence (LLCVSS), which is indicated by fine-grained siliciclastic sediments, gray basic coarse-grained different pyroclastic rocks and bimodal volcanism. During this stage, tuff-hosted stratiform, exhalative Mn deposits (Nudeh, Benesbourd, Ferizy and Goft), oxide Cu deposits (Garab and Ferizy) and Cu-Zn VMS (Nudeh, Chun and Lala) deposits formed. (II) Upper Late Cretaceous Sedimentary Dominated Sequence (ULCSS), including pelagic limestone, marly tuff, silty limestone and marl with minor andesitic tuff rocks. The economically most important Mn (Zakeri and Cheshmeh-sefid) deposits of Sabzevar zone occur within the marly tuff of this sequence. The Nudeh Cu-Zn volcanogenic massive sulfide (VMS) deposit is situated in the LLCVSS. The host-rock of deposits consists of alkali olivine basalt flow and tuffaceous silty sandstone. Mineralization occurs as stratiform blanket-like and tabular orebodies. Based on ore body structure, mineralogy, and ore fabric, we recognize three different ore facies in the Nudeh deposit: (1) a stringer zone, consisting of a discordant mineralization of sulfides forming a stockwork of sulfide-bearing quartz veins cutting the footwall volcano-sedimentary rocks; (2) a massive ore, consisting of massive replacement pyrite, chalcopyrite, sphalerite and Friedrichite with magnetite; (3) bedded ore, with laminated to disseminated pyrite, and chalcopyrite. Chloritization, silicification, sericitization and epidotization are the main wall-rock alterations; alteration intensity increases towards the stringer zone. The δ34S composition of the sulfides ranges from -1.5‰ to +3.69‰ with a general increase of δ34S ratios of massive ore facies to stockwork zone. The heavier values indicate that some of the sulfur was derived from seawater sulfate that was ultimately thermochemically reduced in deep hydrothermal reaction zones. Sulfur isotopes, along with sedimentological, textural, petrological, mineralogical, and geochemical evidences, suggest that this deposit should be classified as a Besshi-type VMS ore deposit.

PROGRAMMABLE DISPLAY PUSHBUTTON LEGEND EDITOR

NASA Technical Reports Server (NTRS)

Busquets, A. M.

1994-01-01

The Programmable Display Pushbutton (PDP) is a pushbutton device available from Micro Switch which has a programmable 16 x 35 matrix of LEDs on the pushbutton surface. Any desired legends can be displayed on the PDPs, producing user-friendly applications which greatly reduce the need for dedicated manual controls. Because the PDP can interact with the operator, it can call for the correct response before transmitting its next message. It is both a simple manual control and a sophisticated programmable link between the operator and the host system. The Programmable Display Pushbutton Legend Editor, PDPE, is used to create the LED displays for the pushbuttons. PDPE encodes PDP control commands and legend data into message byte strings sent to a Logic Refresh and Control Unit (LRCU). The LRCU serves as the driver for a set of four PDPs. The legend editor (PDPE) transmits to the LRCU user specified commands that control what is displayed on the LED face of the individual pushbuttons. Upon receiving a command, the LRCU transmits an acknowledgement that the message was received and executed successfully. The user then observes the effect of the command on the PDP displays and decides whether or not to send the byte code of the message to a data file so that it may be called by an applications program. The PDPE program is written in FORTRAN for interactive execution. It was developed on a DEC VAX 11/780 under VMS. It has a central memory requirement of approximately 12800 bytes. It requires four Micro Switch PDPs and two RS-232 VAX 11/780 terminal ports. The PDPE program was developed in 1985.

FTOOLS: A FITS Data Processing and Analysis Software Package

NASA Astrophysics Data System (ADS)

Blackburn, J. K.

FTOOLS, a highly modular collection of over 110 utilities for processing and analyzing data in the FITS (Flexible Image Transport System) format, has been developed in support of the HEASARC (High Energy Astrophysics Science Archive Research Center) at NASA's Goddard Space Flight Center. Each utility performs a single simple task such as presentation of file contents, extraction of specific rows or columns, appending or merging tables, binning values in a column or selecting subsets of rows based on a boolean expression. Individual utilities can easily be chained together in scripts to achieve more complex operations such as the generation and displaying of spectra or light curves. The collection of utilities provides both generic processing and analysis utilities and utilities specific to high energy astrophysics data sets used for the ASCA, ROSAT, GRO, and XTE missions. A core set of FTOOLS providing support for generic FITS data processing, FITS image analysis and timing analysis can easily be split out of the full software package for users not needing the high energy astrophysics mission utilities. The FTOOLS software package is designed to be both compatible with IRAF and completely stand alone in a UNIX or VMS environment. The user interface is controlled by standard IRAF parameter files. The package is self documenting through the IRAF help facility and a stand alone help task. Software is written in ANSI C and \\fortran to provide portability across most computer systems. The data format dependencies between hardware platforms are isolated through the FITSIO library package.

The evolution of the FIGARO data reduction system

NASA Technical Reports Server (NTRS)

Shortridge, K.

1992-01-01

The Figaro data reduction system originated at Caltech around 1983. It was based on concepts being developed in the U.K. by the Starlink organization, particularly the use of hierarchical self-defining data structures and the abstraction of most user-interaction into a set of 'parameter system' routines. Since 1984 it has continued to be developed at AAO, in collaboration with Starlink and Caltech. It was adopted as Starlink's main spectroscopic data reduction package, although it is by no means limited to spectra; it has operations for images and data cubes and even a few (very specialized) for four-dimensional data hypercubes. It continued to be used at Caltech and will be used at the Keck. It is also in use at a variety of other organizations around the world. Figaro was originally a system for VMS Vaxes. Recently it was ported (at Caltech) to run on SUN's, and work is underway at the University of New South Wales on a DecStation version. It is hoped to coordinate all this work into a unified release, but coordination of the development of a system by organizations covering three continents poses a number of interesting administrative problems. The hierarchical data structures used by Figaro allow it to handle a variety of types of data, and to add new items to data structures. Error and data quality information was added to the basic file format used, error information being particularly useful for infrared data. Cooperating sets of programs can add specific sub-structures to data files to carry information that they understand (polarimetry data containing multiple data arrays, for example), without this affecting the way other programs handle the files. Complex instrument-specific ancillary information can be added to data files written at a telescope and can be used by programs that understand the instrumental details in order to produce properly calibrated data files. Once this preliminary data processing was done the resulting files contain 'ordinary' spectra or images that can be processed by programs that are not instrument-specific. The structures holding the instrumental information can then be discarded from the files. Much effort has gone into trying to make it easy to write Figaro programs; data access subroutines are now available to handle access to all the conventional items found in Figaro files (main data arrays, error information, quality information etc), and programs that only need to access such items can be very simple indeed. A large number of Figaro users do indeed write their own Figaro applications using these routines. The fact that Figaro programs are written as callable subroutines getting information from the user through a small set of parameter routines means that they can be invoked in numerous ways; they are normally linked and run as individual programs (called by a small main routine that is generated automatically), but are also available linked to run under the ADAM data acquisition system and there is an interface that lets them be called as part of a user-written Fortran program. The long-term future of Figaro probably depends to a large extent on how successfully it manages the transition from being a VMS-only system to being a multi-platform system.

Criteria for design of integrated flight/propulsion control systems for STOVL fighter aircraft

NASA Technical Reports Server (NTRS)

Franklin, James A.

1993-01-01

As part of NASA's program to develop technology for short takeoff and vertical landing (STOVL) fighter aircraft, control system designs have been developed for a conceptual STOVL aircraft. This aircraft is representative of the class of mixed-flow remote-lift concepts that was identified as the preferred design approach by the U.S./U.K. STOVL Joint Assessment and Ranking Team. The control system designs have been evaluated throughout the powered-lift flight envelope on the Vertical Motion Simulator (VMS) at Ames Research Center. Items assessed in the control system evaluation were: maximum control power used in transition and vertical flight, control system dynamic response associated with thrust transfer for attitude control, thrust margin in the presence of ground effect and hot-gas ingestion, and dynamic thrust response for the engine core. Effects of wind, turbulence, and ship airwake disturbances are incorporated in the evaluation. Results provide the basis for a reassessment of existing flying-qualities design criteria applied to STOVL aircraft.

A Comprehensive Availability Modeling and Analysis of a Virtualized Servers System Using Stochastic Reward Nets

PubMed Central

Kim, Dong Seong; Park, Jong Sou

2014-01-01

It is important to assess availability of virtualized systems in IT business infrastructures. Previous work on availability modeling and analysis of the virtualized systems used a simplified configuration and assumption in which only one virtual machine (VM) runs on a virtual machine monitor (VMM) hosted on a physical server. In this paper, we show a comprehensive availability model using stochastic reward nets (SRN). The model takes into account (i) the detailed failures and recovery behaviors of multiple VMs, (ii) various other failure modes and corresponding recovery behaviors (e.g., hardware faults, failure and recovery due to Mandelbugs and aging-related bugs), and (iii) dependency between different subcomponents (e.g., between physical host failure and VMM, etc.) in a virtualized servers system. We also show numerical analysis on steady state availability, downtime in hours per year, transaction loss, and sensitivity analysis. This model provides a new finding on how to increase system availability by combining both software rejuvenations at VM and VMM in a wise manner. PMID:25165732

Counternarcotic Efforts in the Southern Cone: Argentina

DTIC Science & Technology

1990-06-15

Corrientes , and in this case* the source is Brazil. Some marijuana is smuggled from Chile through Mendoza and Neuquen provinces. The transportation method...34 3, States in the early 1960’s promoted as part of the Alliance for Progress program the "antifoco" theory which vms eagerly accepted and incorporated

"Fiberoptic variable message signs" : Swift Interchange - Delta Park Interchange Section, Pacific Highway (Interstate 5) : final report.

DOT National Transportation Integrated Search

1995-02-01

The SYLVIA fiberoptic variable message signs (VMS) were installed on the Pacific Highway (I-5) as a part of the "Swift Interchange - Delta Park Interchange" project at milepost 298.47 and at milepost 305.66 in January 1991. Initially, during project ...

Scientific data bases on a VAX-11/780 running VMS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benkovitz, C.M.; Tichler, J.L.

At Brookhaven National Laboratory several current projects are developing and applying data management techniques to compile, analyze and distribute scientific data sets that are the result of various multi institutional experiments and data gathering projects. This paper will present an overview of a few of these data management projects.

50 CFR Appendix B to Part 404 - Approved VMS

Code of Federal Regulations, 2011 CFR

2011-10-01

... has the capability of two-way communications to send formatted forms and to receive e-mail and other... Maritime Mobile Earth Station.” The owner should consult with Thrane & Thrane when completing this form...) vessel documentation or registration number; and (9) mobile earth station license (FCC license). The OLE...

50 CFR Appendix B to Part 404 - Approved VMS

Code of Federal Regulations, 2013 CFR

2013-10-01

... has the capability of two-way communications to send formatted forms and to receive e-mail and other... Maritime Mobile Earth Station.” The owner should consult with Thrane & Thrane when completing this form...) vessel documentation or registration number; and (9) mobile earth station license (FCC license). The OLE...

50 CFR Appendix B to Part 404 - Approved VMS

Code of Federal Regulations, 2010 CFR

2010-10-01

... has the capability of two-way communications to send formatted forms and to receive e-mail and other... Maritime Mobile Earth Station.” The owner should consult with Thrane & Thrane when completing this form...) vessel documentation or registration number; and (9) mobile earth station license (FCC license). The OLE...

50 CFR Appendix B to Part 404 - Approved VMS

Code of Federal Regulations, 2012 CFR

2012-10-01

... has the capability of two-way communications to send formatted forms and to receive e-mail and other... Maritime Mobile Earth Station.” The owner should consult with Thrane & Thrane when completing this form...) vessel documentation or registration number; and (9) mobile earth station license (FCC license). The OLE...

Interfacing HTCondor-CE with OpenStack

NASA Astrophysics Data System (ADS)

Bockelman, B.; Caballero Bejar, J.; Hover, J.

2017-10-01

Over the past few years, Grid Computing technologies have reached a high level of maturity. One key aspect of this success has been the development and adoption of newer Compute Elements to interface the external Grid users with local batch systems. These new Compute Elements allow for better handling of jobs requirements and a more precise management of diverse local resources. However, despite this level of maturity, the Grid Computing world is lacking diversity in local execution platforms. As Grid Computing technologies have historically been driven by the needs of the High Energy Physics community, most resource providers run the platform (operating system version and architecture) that best suits the needs of their particular users. In parallel, the development of virtualization and cloud technologies has accelerated recently, making available a variety of solutions, both commercial and academic, proprietary and open source. Virtualization facilitates performing computational tasks on platforms not available at most computing sites. This work attempts to join the technologies, allowing users to interact with computing sites through one of the standard Computing Elements, HTCondor-CE, but running their jobs within VMs on a local cloud platform, OpenStack, when needed. The system will re-route, in a transparent way, end user jobs into dynamically-launched VM worker nodes when they have requirements that cannot be satisfied by the static local batch system nodes. Also, once the automated mechanisms are in place, it becomes straightforward to allow an end user to invoke a custom Virtual Machine at the site. This will allow cloud resources to be used without requiring the user to establish a separate account. Both scenarios are described in this work.

PLOT3D/AMES, DEC VAX VMS VERSION USING DISSPLA (WITHOUT TURB3D)

NASA Technical Reports Server (NTRS)

Buning, P. G.

1994-01-01

PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into five groups: 1) Grid Functions for grids, grid-checking, etc.; 2) Scalar Functions for contour or carpet plots of density, pressure, temperature, Mach number, vorticity magnitude, helicity, etc.; 3) Vector Functions for vector plots of velocity, vorticity, momentum, and density gradient, etc.; 4) Particle Trace Functions for rake-like plots of particle flow or vortex lines; and 5) Shock locations based on pressure gradient. TURB3D is a modification of PLOT3D which is used for viewing CFD simulations of incompressible turbulent flow. Input flow data consists of pressure, velocity and vorticity. Typical quantities to plot include local fluctuations in flow quantities and turbulent production terms, plotted in physical or wall units. PLOT3D/TURB3D includes both TURB3D and PLOT3D because the operation of TURB3D is identical to PLOT3D, and there is no additional sample data or printed documentation for TURB3D. Graphical capabilities of PLOT3D version 3.6b+ vary among the implementations available through COSMIC. Customers are encouraged to purchase and carefully review the PLOT3D manual before ordering the program for a specific computer and graphics library. There is only one manual for use with all implementations of PLOT3D, and although this manual generally assumes that the Silicon Graphics Iris implementation is being used, informative comments concerning other implementations appear throughout the text. With all implementations, the visual representation of the object and flow field created by PLOT3D consists of points, lines, and polygons. Points can be represented with dots or symbols, color can be used to denote data values, and perspective is used to show depth. Differences among implementations impact the program's ability to use graphical features that are based on 3D polygons, the user's ability to manipulate the graphical displays, and the user's ability to obtain alternate forms of output. The VAX/VMS/DISSPLA implementation of PLOT3D supports 2-D polygons as well as 2-D and 3-D lines, but does not support graphics features requiring 3-D polygons (shading and hidden line removal, for example). Views can be manipulated using keyboard commands. This version of PLOT3D is potentially able to produce files for a variety of output devices; however, site-specific capabilities will vary depending on the device drivers supplied with the user's DISSPLA library. If ARCGRAPH (ARC-12350) is installed on the user's VAX, the VMS/DISSPLA version of PLOT3D can also be used to create files for use in GAS (Graphics Animation System, ARC-12379), an IRIS program capable of animating and recording images on film. The version 3.6b+ VMS/DISSPLA implementations of PLOT3D (ARC-12777) and PLOT3D/TURB3D (ARC-12781) were developed for use on VAX computers running VMS Version 5.0 and DISSPLA Version 11.0. The standard distribution media for each of these programs is a 9-track, 6250 bpi magnetic tape in DEC VAX BACKUP format. Customers purchasing one implementation version of PLOT3D or PLOT3D/TURB3D will be given a $200 discount on each additional implementation version ordered at the same time. Version 3.6b+ of PLOT3D and PLOT3D/TURB3D are also supported for the following computers and graphics libraries: (1) generic UNIX Supercomputer and IRIS, suitable for CRAY 2/UNICOS, CONVEX, and Alliant with remote IRIS 2xxx/3xxx or IRIS 4D (ARC-12779, ARC-12784); (2) Silicon Graphics IRIS 2xxx/3xxx or IRIS 4D (ARC-12783, ARC12782); (3) generic UNIX and DISSPLA Version 11.0 (ARC-12788, ARC-12778); and (4) Apollo computers running UNIX and GMR3D Version 2.0 (ARC-12789, ARC-12785 which have no capabilities to put text on plots). Silicon Graphics Iris, IRIS 4D, and IRIS 2xxx/3xxx are trademarks of Silicon Graphics Incorporated. VAX and VMS are trademarks of Digital Electronics Corporation. DISSPLA is a trademark of Computer Associates. CRAY 2 and UNICOS are trademarks of CRAY Research, Incorporated. CONVEX is a trademark of Convex Computer Corporation. Alliant is a trademark of Alliant. Apollo and GMR3D are trademarks of Hewlett-Packard, Incorporated. UNIX is a registered trademark of AT&T.

PLOT3D/AMES, DEC VAX VMS VERSION USING DISSPLA (WITH TURB3D)

NASA Technical Reports Server (NTRS)

Buning, P.

1994-01-01

PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into five groups: 1) Grid Functions for grids, grid-checking, etc.; 2) Scalar Functions for contour or carpet plots of density, pressure, temperature, Mach number, vorticity magnitude, helicity, etc.; 3) Vector Functions for vector plots of velocity, vorticity, momentum, and density gradient, etc.; 4) Particle Trace Functions for rake-like plots of particle flow or vortex lines; and 5) Shock locations based on pressure gradient. TURB3D is a modification of PLOT3D which is used for viewing CFD simulations of incompressible turbulent flow. Input flow data consists of pressure, velocity and vorticity. Typical quantities to plot include local fluctuations in flow quantities and turbulent production terms, plotted in physical or wall units. PLOT3D/TURB3D includes both TURB3D and PLOT3D because the operation of TURB3D is identical to PLOT3D, and there is no additional sample data or printed documentation for TURB3D. Graphical capabilities of PLOT3D version 3.6b+ vary among the implementations available through COSMIC. Customers are encouraged to purchase and carefully review the PLOT3D manual before ordering the program for a specific computer and graphics library. There is only one manual for use with all implementations of PLOT3D, and although this manual generally assumes that the Silicon Graphics Iris implementation is being used, informative comments concerning other implementations appear throughout the text. With all implementations, the visual representation of the object and flow field created by PLOT3D consists of points, lines, and polygons. Points can be represented with dots or symbols, color can be used to denote data values, and perspective is used to show depth. Differences among implementations impact the program's ability to use graphical features that are based on 3D polygons, the user's ability to manipulate the graphical displays, and the user's ability to obtain alternate forms of output. The VAX/VMS/DISSPLA implementation of PLOT3D supports 2-D polygons as well as 2-D and 3-D lines, but does not support graphics features requiring 3-D polygons (shading and hidden line removal, for example). Views can be manipulated using keyboard commands. This version of PLOT3D is potentially able to produce files for a variety of output devices; however, site-specific capabilities will vary depending on the device drivers supplied with the user's DISSPLA library. If ARCGRAPH (ARC-12350) is installed on the user's VAX, the VMS/DISSPLA version of PLOT3D can also be used to create files for use in GAS (Graphics Animation System, ARC-12379), an IRIS program capable of animating and recording images on film. The version 3.6b+ VMS/DISSPLA implementations of PLOT3D (ARC-12777) and PLOT3D/TURB3D (ARC-12781) were developed for use on VAX computers running VMS Version 5.0 and DISSPLA Version 11.0. The standard distribution media for each of these programs is a 9-track, 6250 bpi magnetic tape in DEC VAX BACKUP format. Customers purchasing one implementation version of PLOT3D or PLOT3D/TURB3D will be given a $200 discount on each additional implementation version ordered at the same time. Version 3.6b+ of PLOT3D and PLOT3D/TURB3D are also supported for the following computers and graphics libraries: (1) generic UNIX Supercomputer and IRIS, suitable for CRAY 2/UNICOS, CONVEX, and Alliant with remote IRIS 2xxx/3xxx or IRIS 4D (ARC-12779, ARC-12784); (2) Silicon Graphics IRIS 2xxx/3xxx or IRIS 4D (ARC-12783, ARC12782); (3) generic UNIX and DISSPLA Version 11.0 (ARC-12788, ARC-12778); and (4) Apollo computers running UNIX and GMR3D Version 2.0 (ARC-12789, ARC-12785 which have no capabilities to put text on plots). Silicon Graphics Iris, IRIS 4D, and IRIS 2xxx/3xxx are trademarks of Silicon Graphics Incorporated. VAX and VMS are trademarks of Digital Electronics Corporation. DISSPLA is a trademark of Computer Associates. CRAY 2 and UNICOS are trademarks of CRAY Research, Incorporated. CONVEX is a trademark of Convex Computer Corporation. Alliant is a trademark of Alliant. Apollo and GMR3D are trademarks of Hewlett-Packard, Incorporated. UNIX is a registered trademark of AT&T.

Interactions between a Trawl Fishery and Spatial Closures for Biodiversity Conservation in the Great Barrier Reef World Heritage Area, Australia

PubMed Central

Grech, Alana; Coles, Rob

2011-01-01

Background The Queensland East Coast Otter Trawl Fishery (ECOTF) for penaeid shrimp fishes within Australia's Great Barrier Reef World Heritage Area (GBRWHA). The past decade has seen the implementation of conservation and fisheries management strategies to reduce the impact of the ECOTF on the seabed and improve biodiversity conservation. New information from electronic vessel location monitoring systems (VMS) provides an opportunity to review the interactions between the ECOTF and spatial closures for biodiversity conservation. Methodology and Results We used fishing metrics and spatial information on the distribution of closures and modelled VMS data in a geographical information system (GIS) to assess change in effort of the trawl fishery from 2001–2009 and to quantify the exposure of 70 reef, non-reef and deep water bioregions to trawl fishing. The number of trawlers and the number of days fished almost halved between 2001 and 2009 and new spatial closures introduced in 2004 reduced the area zoned available for trawl fishing by 33%. However, we found that there was only a relatively minor change in the spatial footprint of the fishery as a result of new spatial closures. Non-reef bioregions benefited the most from new spatial closures followed by deep and reef bioregions. Conclusions/Significance Although the catch of non target species remains an issue of concern for fisheries management, the small spatial footprint of the ECOTF relative to the size of the GBRWHA means that the impact on benthic habitats is likely to be negligible. The decline in effort as a result of fishing industry structural adjustment, increasing variable costs and business decisions of fishers is likely to continue a trend to fish only in the most productive areas. This will provide protection for most benthic habitats without any further legislative or management intervention. PMID:21695155

Query by forms: User-oriented relational database retrieving system and its application in analysis of experiment data

NASA Astrophysics Data System (ADS)

Skotniczny, Zbigniew

1989-12-01

The Query by Forms (QbF) system is a user-oriented interactive tool for querying large relational database with minimal queries difinition cost. The system was worked out under the assumption that user's time and effort for defining needed queries is the most severe bottleneck. The system may be applied in any Rdb/VMS databases system and is recommended for specific information systems of any project where end-user queries cannot be foreseen. The tool is dedicated to specialist of an application domain who have to analyze data maintained in database from any needed point of view, who do not need to know commercial databases languages. The paper presents the system developed as a compromise between its functionality and usability. User-system communication via a menu-driven "tree-like" structure of screen-forms which produces a query difinition and execution is discussed in detail. Output of query results (printed reports and graphics) is also discussed. Finally the paper shows one application of QbF to a HERA-project.

"Pack[superscript2]": VM Resource Scheduling for Fine-Grained Application SLAs in Highly Consolidated Environment

ERIC Educational Resources Information Center

Sukwong, Orathai

2013-01-01

Virtualization enables the ability to consolidate multiple servers on a single physical machine, increasing the infrastructure utilization. Maximizing the ratio of server virtual machines (VMs) to physical machines, namely the consolidation ratio, becomes an important goal toward infrastructure cost saving in a cloud. However, the consolidation…

EDT mode for JED -- An advanced Unix text editor

NASA Astrophysics Data System (ADS)

McIlwrath, B. K.; Page, C. G.

This note describes Starlink extended EDT emulation for the JED editor. It provides a Unix text editor which can utilise the advanced facilities of DEC VTn00, xterm and similar terminals. JED in this mode provides a reasonably good emulation of the VAX/VMS editor EDT in addition to many extra facilities.

50 CFR 665.243 - Prohibitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... crustacean management area except as provided in § 665.245. (5) Maintain on board the vessel or in the water... vessel that has a limited access permit issued under § 665.242 any lobster trap in Crustacean Permit Area... issued under this subpart any lobster trap in Crustacean Permit Area 1 VMS Subarea when fishing for...

50 CFR 665.243 - Prohibitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... crustacean management area except as provided in § 665.245. (5) Maintain on board the vessel or in the water... vessel that has a limited access permit issued under § 665.242 any lobster trap in Crustacean Permit Area... issued under this subpart any lobster trap in Crustacean Permit Area 1 VMS Subarea when fishing for...

50 CFR 665.241 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

.... As used in §§ 665.240 through 665.259: Hawaii crustacean management area is divided into the following areas: (1) Crustacean Permit Area 1 (Permit Area 1) means the EEZ around the NWHI. (2) Crustacean Permit Area 2 (Permit Area 2) means the EEZ around the MHI. (3) Crustacean Permit Area 1 VMS Subarea...

50 CFR 665.241 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

.... As used in §§ 665.240 through 665.259: Hawaii crustacean management area is divided into the following areas: (1) Crustacean Permit Area 1 (Permit Area 1) means the EEZ around the NWHI. (2) Crustacean Permit Area 2 (Permit Area 2) means the EEZ around the MHI. (3) Crustacean Permit Area 1 VMS Subarea...

50 CFR 665.243 - Prohibitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... crustacean management area except as provided in § 665.245. (5) Maintain on board the vessel or in the water... vessel that has a limited access permit issued under § 665.242 any lobster trap in Crustacean Permit Area... issued under this subpart any lobster trap in Crustacean Permit Area 1 VMS Subarea when fishing for...

50 CFR 665.241 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

.... As used in §§ 665.240 through 665.259: Hawaii crustacean management area is divided into the following areas: (1) Crustacean Permit Area 1 (Permit Area 1) means the EEZ around the NWHI. (2) Crustacean Permit Area 2 (Permit Area 2) means the EEZ around the MHI. (3) Crustacean Permit Area 1 VMS Subarea...

Volcanogenic massive sulfide occurrence model: Chapter C in Mineral deposit models for resource assessment

USGS Publications Warehouse

Shanks, W.C. Pat; Koski, Randolph A.; Mosier, Dan L.; Schulz, Klaus J.; Morgan, Lisa A.; Slack, John F.; Ridley, W. Ian; Dusel-Bacon, Cynthia; Seal, Robert R.; Piatak, Nadine M.; Shanks, W.C. Pat; Thurston, Roland

2012-01-01

An unusual feature of VMS deposits is the common association of stratiform "exhalative" deposits precipitated from hydrothermal fluids emanating into bottom waters. These deposits may extend well beyond the margins of massive sulfide and are typically composed of silica, iron, and manganese oxides, carbonates, sulfates, sulfides, and tourmaline.

Plaque components affect wall stress in stented human carotid artery: A numerical study

NASA Astrophysics Data System (ADS)

Fan, Zhen-Min; Liu, Xiao; Du, Cheng-Fei; Sun, An-Qiang; Zhang, Nan; Fan, Zhan-Ming; Fan, Yu-Bo; Deng, Xiao-Yan

2016-12-01

Carotid artery stenting presents challenges of in-stent restenosis and late thrombosis, which are caused primarily by alterations in the mechanical environment of the artery after stent implantation. The present study constructed patient-specific carotid arterial bifurcation models with lipid pools and calcified components based on magnetic resonance imaging. We numerically analyzed the effects of multicomponent plaques on the distributions of von Mises stresses (VMSs) in the patient-specific models after stenting. The results showed that when a stent was deployed, the large soft lipid pool in atherosclerotic plaques cushioned the host artery and reduced the stress within the arterial wall; however, this resulted in a sharp increase of VMS in the fibrous cap. When compared with the lipid pool, the presence of the calcified components led to slightly increased stresses on the luminal surface. However, when a calcification was located close to the luminal surface of the host artery and the stenosis, the local VMS was elevated. Overall, compared with calcified components, large lipid pools severely damaged the host artery after stenting. Furthermore, damage due to the calcified component may depend on location.

What causes hot flushes? The neuroendocrine origin of vasomotor symptoms in the menopause.

PubMed

Rossmanith, Winfried G; Ruebberdt, Wiebke

2009-05-01

Vasomotor symptoms (VMS) such as hot flushes and night sweats are frequently encountered during menopause and can greatly reduce the quality of life. These symptoms are causally related to decreasing estradiol concentrations, mainly in the serum and subsequently also in the hypothalamic temperature regulating centre. The lack of estrogens alters neurotransmitter activity, especially in the serotonergic and noradrenergic pathways. Because sex steroids act as potent neuromodulators, the substitution of ovarian sex steroids by hormone replacement therapy is the most effective treatment option for VMS. When contraindications exist for the use of sex steroids, steroid-free drugs are a possible alternative. A better understanding of the physiology of thermoregulation, thermoregulatory dysfunction and adaptive processes of the brain may facilitate the development of new therapeutic approaches. Such drugs could then be used to treat vasomotor disorders even when the use of steroid hormones is contraindicated. This review article summarises our knowledge on the mechanisms of temperature regulation and describes deviations from this regulation during altered sex steroid conditions. Our current knowledge on neuroendocrinology of thermoregulation may serve as a basis for the use of steroid-free pharmacological intervention.

Anharmonic Effects on Vibrational Spectra Intensities: Infrared, Raman, Vibrational Circular Dichroism and Raman Optical Activity

PubMed Central

Bloino, Julien; Biczysko, Malgorzata; Barone, Vincenzo

2017-01-01

The aim of this paper is twofold. First, we want to report the extension of our virtual multifrequency spectrometer (VMS) to anharmonic intensities for Raman Optical Activity (ROA) with the full inclusion of first- and second-order resonances for both frequencies and intensities in the framework of the generalized second-order vibrational perturbation theory (GVPT2) for all kinds of vibrational spectroscopies. Then, from a more general point of view, we want to present and validate the performance of VMS for the parallel analysis of different vibrational spectra for medium-sized molecules (IR, Raman, VCD, ROA) including both mechanical and electric/magnetic anharmonicity. For the well-known methyloxirane benchmark, careful selection of density functional, basis set, and resonance tresholds permitted to reach qualitative and quantitative vis-à-vis comparison between experimental and computed band positions and shapes. Next, the whole series of halogenated azetidinones is analyzed, showing that it is now possible to interpret different spectra in terms of electronegativity, polarizability, and hindrance variation between closely related substituents, chiral spectroscopies being particular effective in this connection. PMID:26580121

Complications of sclerotherapy for 75 head and neck venous malformations.

PubMed

Castrén, Eeva; Aronniemi, Johanna; Klockars, Tuomas; Pekkola, Johanna; Lappalainen, Kimmo; Vuola, Pia; Salminen, Päivi; Pitkäranta, Anne

2016-04-01

Sclerotherapy is one treatment option for head and neck venous malformations (VMs). Evaluation of complication risks is, however, essential to improve its safety. We aimed to systematically report sclerotherapy complications by means of the Clavien-Dindo classification and to distinguish factors predisposing to complications. We identified our institution's head and neck VM patients who received sclerotherapy between 1 January 2007 and 31 August 2013, analyzed patient reports retrospectively, and applied to them the Clavien-Dindo classification. Our 75 VM patients underwent a total of 150 sclerotherapy sessions. The most common sclerosants were 3 % sodium tetradecyl sulfate and polidocanol. Complications occurred in 13 patients (17.3 %) and in 15 sessions (10.0 %); 3 complications required extensive postprocedural treatment and caused permanent morbidity, whereas 12 received conservative treatment. Patients with sclerotherapy complications underwent more treatments (p = 0.009) and more often needed further surgery (p = 0.007). We thus consider sclerotherapy a relatively safe treatment modality for head and neck VMs. To avoid complications, evaluation of VM characteristics and optimal treatment technique in a multidisciplinary team is vital.

Build and Execute Environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guan, Qiang

At exascale, the challenge becomes to develop applications that run at scale and use exascale platforms reliably, efficiently, and flexibly. Workflows become much more complex because they must seamlessly integrate simulation and data analytics. They must include down-sampling, post-processing, feature extraction, and visualization. Power and data transfer limitations require these analysis tasks to be run in-situ or in-transit. We expect successful workflows will comprise multiple linked simulations along with tens of analysis routines. Users will have limited development time at scale and, therefore, must have rich tools to develop, debug, test, and deploy applications. At this scale, successful workflows willmore » compose linked computations from an assortment of reliable, well-defined computation elements, ones that can come and go as required, based on the needs of the workflow over time. We propose a novel framework that utilizes both virtual machines (VMs) and software containers to create a workflow system that establishes a uniform build and execution environment (BEE) beyond the capabilities of current systems. In this environment, applications will run reliably and repeatably across heterogeneous hardware and software. Containers, both commercial (Docker and Rocket) and open-source (LXC and LXD), define a runtime that isolates all software dependencies from the machine operating system. Workflows may contain multiple containers that run different operating systems, different software, and even different versions of the same software. We will run containers in open-source virtual machines (KVM) and emulators (QEMU) so that workflows run on any machine entirely in user-space. On this platform of containers and virtual machines, we will deliver workflow software that provides services, including repeatable execution, provenance, checkpointing, and future proofing. We will capture provenance about how containers were launched and how they interact to annotate workflows for repeatable and partial re-execution. We will coordinate the physical snapshots of virtual machines with parallel programming constructs, such as barriers, to automate checkpoint and restart. We will also integrate with HPC-specific container runtimes to gain access to accelerators and other specialized hardware to preserve native performance. Containers will link development to continuous integration. When application developers check code in, it will automatically be tested on a suite of different software and hardware architectures.« less

Handling Qualities of Large Rotorcraft in Hover and Low Speed

NASA Technical Reports Server (NTRS)

Malpica, Carlos; Theodore, Colin R.; Lawrence , Ben; Blanken, Chris L.

2015-01-01

According to a number of system studies, large capacity advanced rotorcraft with a capability of high cruise speeds (approx.350 mph) as well as vertical and/or short take-off and landing (V/STOL) flight could alleviate anticipated air transportation capacity issues by making use of non-primary runways, taxiways, and aprons. These advanced aircraft pose a number of design challenges, as well as unknown issues in the flight control and handling qualities domains. A series of piloted simulation experiments have been conducted on the NASA Ames Research Center Vertical Motion Simulator (VMS) in recent years to systematically investigate the fundamental flight control and handling qualities issues associated with the characteristics of large rotorcraft, including tiltrotors, in hover and low-speed maneuvering.

Post-depositional tectonic modification of VMS deposits in Iberia and its economic significance

NASA Astrophysics Data System (ADS)

Castroviejo, Ricardo; Quesada, Cecilio; Soler, Miguel

2011-07-01

The original stratigraphic relationships and structure of VMS deposits are commonly obscured by deformation. This can also affect their economic significance, as shown by several Iberian Pyrite Belt (IPB, SW Iberia) examples. The contrasting rheologic properties of the different lithologies present in an orebody (massive sulphide, feeder stockwork, alteration envelope, volcanic and sedimentary rocks) play a major role in determining its overall behaviour. Variscan thin-skinned tectonics led to stacking of the massive pyrite and stockwork bodies in duplex structures, resulting in local thickening and increased tonnage of minable mineralization. Furthermore, differential mechanical behaviour of the different sulphide minerals localised the detachments along relatively ductile sulphide-rich bands. The result was a geochemical and mineralogical reorganisation of most deposits, which now consist of barren, massive pyrite horses, bounded by base metal-rich ductile shear zones. Metal redistribution was enhanced by mobilisation of the base metal sulphides from the initially impoverished massive pyrite, through pressure-solution processes, to tensional fissures within the already ductile shear zones. In NW Iberia, VMS deposits were also strongly overprinted by the Variscan deformation during emplacement of the Cabo Ortegal and Órdenes allochthonous nappe complexes, but no stacking of the orebodies was produced. Original contacts were transposed, and the orebodies, their feeder zones and the country rock acquired pronounced laminar geometry. In lower-grade rocks (greenschist facies, Cabo Ortegal Complex), solution transfer mechanisms are common in pyrite, which remains in the brittle domain, while chalcopyrite shows ductile behaviour. In higher-grade rocks (amphibolite facies, Órdenes Complex), metamorphic recrystallisation overprints earlier deformation textures. The contrasting behaviour of the IPB and NW Iberian deposits is explained by key factors that affect their final geometry, composition and economics, such as pre-deformation structure, size and mineralogical composition of the orebody and associated lithologies, temperature, crustal level, deviatoric stress and availability of a fluid phase during deformation and the style and rate of deformation.