Anbindung des SISIS-SunRise-Bibliothekssystems an das zentrale Identitätsmanagement

NASA Astrophysics Data System (ADS)

Ebner, Ralf; Pretz, Edwin

Wir berichten über Konzepte und Implementierungen zur Datenprovisionierung aus den Personenverwaltungssystemen der Technischen Universität München (TUM) über das zentrale Metadirectory am Leibniz-Rechenzentrum (LRZ) in das SISIS-SunRise-Bibliothekssystem der Universitätsbibliothek der TUM (TUB). Es werden drei Implementierungsvarianten diskutiert, angefangen von der Generierung und Übertragung einfacher CSV-Dateien über ein OpenLDAP-basiertes Konzept als Backend für die SISIS-Datenbank bis zur endgültigen Implementierung mit dem OCLC IDM Connector.

Measurement of $W$ -Boson Helicity-Fractions in Top-Quark Decays with the CDF II Experiment and Prospects for an Early $$t\\overline{t}$$ Cross-Section Measurement with the CMS Experiment (in German)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chwalek, Thorsten

2010-12-02

Aus was besteht die Welt? Die Frage nach den fundamentalen Bausteinen der Materie beschaftigte Wissenschaftler und Gelehrte zu allen Zeiten. Ausgehend von abstrakten philosophischen Uberlegungen wurde das Konzept von kleinsten, nicht weiter zerteilbaren Grundbausteinen der Materie bereits einige Jahrhunderte vor Christus von indischen und griechischen Philosophieschulen entwickelt. Etwa 450 v. Chr. pragte Demokrit den Begriff ´atomos, das “Unzerschneidbare”, fur die diskreten Grundbausteine der Materie. Doch erst in der jungeren Vergangenheit konnte dieses philosophische Konzept auch experimentell uberpruft werden.

Dewey's Theory of the Democratic Public and the Public Character of Charter Schools

ERIC Educational Resources Information Center

Waks, Leonard J.

2010-01-01

In this essay, Leonard Waks reconsiders the issue of the public character of charter schools, that is, schools funded through public taxation but operated by non-state organizations such as nonprofit and for-profit educational corporations and nongovernmental public interest organizations. Using John Dewey's conception of a democratic public as a…

Dewey and Video Games: From Education through Occupations to Education through Simulations

ERIC Educational Resources Information Center

Waddington, David I.

2015-01-01

Critics like Leonard Waks argue that video games are, at best, a dubious substitute for the rich classroom experiences that John Dewey wished to create and that, at worst, they are profoundly miseducative. Using the example of "Fate of the World," a climate change simulation game, David Waddington addresses these concerns through a…

Social Foundations of Education for the Information Age

ERIC Educational Resources Information Center

Waks, Leonard J.

2013-01-01

In this paper, Leonard J. Waks re-imagines the social foundations of education (SFE) as a project within the information society. He begins with what he believes to be a reasonably non-controversial definition: SFE is a field of scholarship and teaching aiming to provide a comprehensive understanding, through description, interpretation, and…

Big Biology: Supersizing Science During the Emergence of the 21st Century

PubMed Central

Vermeulen, Niki

2017-01-01

Ist Biologie das jüngste Mitglied in der Familie von Big Science? Die vermehrte Zusammenarbeit in der biologischen Forschung wurde in der Folge des Human Genome Project zwar zum Gegenstand hitziger Diskussionen, aber Debatten und Reflexionen blieben meist im Polemischen verhaftet und zeigten eine begrenzte Wertschätzung für die Vielfalt und Erklärungskraft des Konzepts von Big Science. Zur gleichen Zeit haben Wissenschafts- und Technikforscher/innen in ihren Beschreibungen des Wandels der Forschungslandschaft die Verwendung des Begriffs Big Science gemieden. Dieser interdisziplinäre Artikel kombiniert eine begriffliche Analyse des Konzepts von Big Science mit unterschiedlichen Daten und Ideen aus einer Multimethodenuntersuchung mehrerer großer Forschungsprojekte in der Biologie. Ziel ist es, ein empirisch fundiertes, nuanciertes und analytisch nützliches Verständnis von Big Biology zu entwickeln und die normativen Debatten mit ihren einfachen Dichotomien und rhetorischen Positionen hinter sich zu lassen. Zwar kann das Konzept von Big Science als eine Mode in der Wissenschaftspolitik gesehen werden – inzwischen vielleicht sogar als ein altmodisches Konzept –, doch lautet meine innovative Argumentation, dass dessen analytische Verwendung unsere Aufmerksamkeit auf die Ausweitung der Zusammenarbeit in den Biowissenschaften lenkt. Die Analyse von Big Biology zeigt Unterschiede zu Big Physics und anderen Formen von Big Science, namentlich in den Mustern der Forschungsorganisation, der verwendeten Technologien und der gesellschaftlichen Zusammenhänge, in denen sie tätig ist. So können Reflexionen über Big Science, Big Biology und ihre Beziehungen zur Wissensproduktion die jüngsten Behauptungen über grundlegende Veränderungen in der Life Science-Forschung in einen historischen Kontext stellen. PMID:27215209

Theoretische Konzepte der Physik

NASA Astrophysics Data System (ADS)

Longair, Malcolm S.; Simon, B.; Simon, H.

"Dies ist kein Lehrbuch der theoretischen Physik, auch kein Kompendium der Physikgeschichte ... , vielmehr eine recht anspruchsvolle Sammlung historischer Miniaturen zur Vergangenheit der theoretischen Physik - ihrer "Sternstunden", wenn man so will. Frei vom Zwang, etwas Erschöpfendes vorlegen zu müssen, gelingt dem Autor etwas Seltenes: einen "lebendigen" Zugang zum Ideengebäude der modernen Physik freizulegen, ... zu zeigen, wie Physik in praxi entsteht... Als Vehikel seiner Absichten dienen dem Autor geschichtliche Fallstudien, insgesamt sieben an der Zahl. Aus ihnen extrahiert er das seiner Meinung nach Lehrhafte, dabei bestrebt, mathematische Anachronismen womöglich zu vermeiden... Als Student hätte ich mir diese gescheiten Essays zum Werden unserer heutigen physikalischen Weltsicht gewünscht. Sie sind originell, didaktisch klug und genieren sich auch nicht, von der Faszination zu sprechen, die ... von der Physik ausgeht. Unnötig darauf hinzuweisen, das sie ein gründliches "konventionelles" Studium weder ersetzen wollen noch können, sie vermögen aber, dazu zu ermuntern." #Astronomische Nachrichten (zur englischen Ausgabe)#1

Stenting und technische Stentumgebung

NASA Astrophysics Data System (ADS)

Hoffstetter, Marc; Pfeifer, Stefan; Schratzenstaller, Thomas; Wintermantel, Erich

In hoch entwickelten Industrieländern stehen laut Weltgesundheitsorganisation (WHO) Herz-Kreislauf-Erkrankungen und speziell die Koronare Herzkrankheit (KHK) an erster Stelle der Todesursachen. In Deutschland betrug die Zahl der erfassten, an KHK erkrankten Personen ohne Berücksichtigung der Dunkelziffer allein im Jahre 2001 über 473.000. Die KHK war im Jahre 2003 mit 92.673 erfassten Todesfällen immer noch die häufigste Todesursache, obgleich in Deutschland die Häufigkeit der Koronarinterventionen zur Behandlung der KHK zwischen 1984 und 2003 um fast das 80fache von 2.809 auf 221.867 Eingriffe pro Jahr gestiegen ist [1]. Neben der hohen Zahl an Todesfällen haben die betroffenen Personen durch chronische Schmerzen und eingeschränkte körperliche Leistungsfähigkeit zusätzlich eine starke Beeinträchtigung der Lebensqualität [2].In Folge dessen wird die erkrankte Person häufig zum Pflegefall was neben den gesundheitlichen Aspekten auch eine sozioökonomische Komponente in Form der fehlenden Arbeitskraft und den auftretenden Pflegekosten nach sich zieht. Die Kosten für die Behandlung der KHK in Deutschland beliefen sich im Jahre 2002 laut Statistischem Bundesamt auf rund 6,9 Mrd. €. Verglichen mit ähnlichen Zahlen der USA dürfte sich der entstandene Schaden für die deutsche Volkswirtschaft im zwei- bis dreistelligen Milliardenbereich bewegen [3].

Proposed Experiment in Two-Qubit Linear Optical Photonic Gates for Maximal Success Rates

DTIC Science & Technology

2012-01-01

Phys. Rev. A 72 032307 [10] Kwiat P G, Waks E White A G, Applebaum I and Eberhaard P E 1999 Phys. Rev. A 60 R773–6 [11] Barz S, Cronenberg G, Zeilinger ...17] Reck M, Zeilinger A, Bernstein H J and Bertani P 1994 Phys. Rev. Lett. 73 58 [18] Thompson M G, Politi A, Matthews J C F and O’Brien J L 2011 IET

Novel fabrication method of the peritoneal dialysis filter using silk fibroin with urease fixation system.

PubMed

Moon, Bo Mi; Choi, Myung-Jin; Sultan, Md Tipu; Yang, Jae Won; Ju, Hyung Woo; Lee, Jung Min; Park, Hyun Jung; Park, Ye Ri; Kim, Soo Hyeon; Kim, Dong Wook; Lee, Min Chae; Jeong, Ju Yeon; Lee, Ok Joo; Sung, Gun Yong; Park, Chan Hum

2017-10-01

During the last decade, there has been a great advance in the kidney dialysis system by wearable artificial kidney (WAK) system for end-stage renal disease patients. Uremic solute removal and water regeneration system are the most prerequisite for WAK to work properly. In this study, we designed a filtering membrane system by using immobilized urease silk fibroin filter and evaluated its comparative effectiveness with a PVDF filtering system in peritoneal dialysate regeneration system by urea removal efficacy. We evaluated this membrane's characteristic and performances by conducting SEM-EDX analyze, water-binding abilities and porosity test, removal abilities of urea, cytotoxicity assay and enzyme activity assay. Under the condition for optimization of urease, the percentage removal of urea was about 40% and 60% in 50 mg/dL urea solution by urease immobilized PVDF and silk fibroin scaffolds, respectively. The batch experimental result showed that immobilized filter removed more than 50% of urea in 50 mg/dL urea solution. In addition silk fibroin with urease filter removed 90 percent of urea in the peritoneal dialysate after 24 h filtration. We suggest that silk fibroin with urease fixation filter can be used more effectively for peritoneal dialysate regeneration system, which have hydrophilic property and prolonged enzyme activity. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 2136-2144, 2017. © 2016 Wiley Periodicals, Inc.

FEMOS - Advanced Neutron Monitor System for Waste Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simon, G.G.; Sokcic-Kostic, M.

2006-07-01

FEMOS is a specially developed monitor to detect fissile materials for waste characterisation and it is also suitable to identify the main neutron emitters. The latest measuring prototype is in routine operation at FZK-HDB (Germany) for determining Plutonium content and alpha activity in 2001 and 4001 drums from the reprocessing plant Karlsruhe (WAK). Authorities license the measurement procedure. Routine measurements conducted over a period of about 6 years and the results show that all specified prerequisites are met with the required reliability. (authors)

The future of the artificial kidney: moving towards wearable and miniaturized devices.

PubMed

Ronco, C; Davenport, A; Gura, V

2011-01-01

New directions in dialysis research include cheaper treatments, home based therapies and simpler methods of blood purification. These objectives may be probably obtained with innovations in the field of artificial kidney through the utilization of new disciplines such as miniaturization, microfluidics, nanotechnology. This research may lead to a new era of dialysis in which the new challenges are transportability, wearability and why not the possibility to develop implantable devices. Although we are not there yet, a new series of papers have recently been published disclosing interesting and promising results on the application of wearable ultrafiltration systems (WUF) and wearable artificial kidneys (WAK). Some of them use extracorporeal blood cleansing as a method of blood purification while others use peritoneal dialysis as a treatment modality (ViWAK and AWAK.) A special mention deserves the wearable/portable ultrafiltration system for the therapy of overhydration and congestive heart failure (WAKMAN). This system will allow dehospitalization and treatment of patients with less comorbidity and improved tolerance. On the way to the wearable artificial kidney, new discoveries have been made such as a complete system for hemofiltration in newborns (CARPEDIEM). The neonate in fact is the typical patient who may benefit from miniaturization of the dialysis circuit. This review analyzes the rationale for such endeavour and the challenges to overcome in order to make possible a true ambulatory dialysis treatment. Some initial results with these new devices are presented. We would like to stimulate a collaborative effort to make a quantum leap in technology making the wearable artificial kidney a reality rather than a dream. 

Computerunterstütztes Modellieren mit Musiknetzen

NASA Astrophysics Data System (ADS)

Levens, Ulla

In der folgenden Ausführung geht es um eine Anwendung von Petri-Netzen im Bereich Musik. Ausgehend von der Implementierung einer speziellen Anwendung, dem Programmsystem ScoreSynth, wird das zugrundeliegende Konzept erläutert und anschließend an einem kleinen Beispiel veranschaulicht. Dieser Beitrag ist ein Auszug aus [Lev95b].

Konventionelle Dampfkraftwerke

NASA Astrophysics Data System (ADS)

Zahoransky, Richard; Allelein, Hans-Josef; Bollin, Elmar; Oehler, Helmut; Schelling, Udo

Das Dampfkraftwerk beruht als thermisches Kraftwerk auf einem thermodynamischen Kreisprozess, der Wärme in technische Arbeit umwandelt. Die Arbeit wird mittels Elektrogenerator als elektrische Energie abgegeben.

Aufgaben und Zielsetzungen

NASA Astrophysics Data System (ADS)

Bauer, Jürgen

Die technisch orientierte Betriebswirtschaft unterstützt den Techniker und Ingenieur bei der Planung und Realisierung wirtschaftlicher Prozesse (Fertigungsprozesse, Entwicklungsprozesse im F+E-Bereich, Vertriebsprozesse, Beschaffungsprozesse),

Von neuen Geschäftsideen zur gelebten Digitalisierung in Utility 4.0 - das Integrierte Geschäftsmodell

NASA Astrophysics Data System (ADS)

Doleski, Oliver D.

Die Energiewirtschaft benötigt neue, digitale Geschäftsmodelle. Gegenwärtig folgt auf Liberalisierung und Energiewende die nächste Stufe einer weitreichenden Bereinigung des Versorgungsmarktes. Digitalisierung und Dezentralisierung sind heute in aller Munde und verlangen nach neuen Produkten und Dienstleistungen. Dabei wirken die immensen Herausforderungen einer digitalen Energiewelt wie Beschleuniger für die Transformation im Versorgungssektor und tragen damit zur breiten Etablierung von Utilities 4.0 bei. Dieser Entwicklungsprozess vollzieht sich mithilfe unterschiedlicher Methoden zur Realisierung neuer Geschäftsideen. Allerdings greifen die gängigen Konzepte zur Entwicklung von Geschäftsmodellen gerade im Hinblick auf die Berücksichtigung komplexer, unbeständiger Rahmenbedingungen und spezifischer Anforderungen der digitalen Energiewelt mitunter zu kurz. Vor diesem Hintergrund wird das auf dem ganzheitlichen St. Galler Management-Konzept beruhende Integrierte Geschäftsmodell iOcTen als geeignetes Instrumentarium zur Geschäftsmodellentwicklung vorgestellt. Neben der Modellbeschreibung unterstützt ein intuitiv verständlicher Leitfaden den Praktiker bei der Transformation vom klassischen Versorgungsunternehmen zum digitalen Energiedienstleistungsunternehmen.

Astronomische Konzepte und Jenseitsvorstellungen in den Pyramidentexten.

NASA Astrophysics Data System (ADS)

Krauss, R.

The Egyptian pyramid texts were first written down around 2300 B.C. They are based on the religious belief in a stellar hereafter and contain the astronomical knowledge of their authors. For example, the ecliptical belt was understood as a canal, on which moon and planets cruise; of the latter Mercury, Venus and Mars were identified. On the basis of their visibility in the course of a year the fixed stars were divided into two groups; a southern group with a period of invisibility and a northern group with continual visibility. The ecliptical "canal" was correctly identified as a division line between the two groups of fixed stars. The aim of this book is to bring these texts foreward to a better understanding of their astronomical background.

Report on the Evaluation Results of the Course "Mechanic Undercarriage Leopard 2"

DTIC Science & Technology

1998-01-14

is onderdeel van TNO Defensieonderzoek waartoe verder behoren: TNO Fysisch en Elektronisch Laboratorium TNO Prins Maurits Laboratorium ...beroepsonderwijs MFO Militaire Functie Opleiding NBC Nucleair Biologisch Chemisch OCLOG Onderwijs Centrum Logistiek OCTD Onderhouds Centrum Technische

Balancing Immunity and Yield in Crop Plants.

PubMed

Ning, Yuese; Liu, Wende; Wang, Guo-Liang

2017-12-01

Crop diseases cause enormous yield losses and threaten global food[ED1] security. The use of highly resistant cultivars can effectively control plant diseases, but in crops, genetic immunity to disease often comes with an unintended reduction in growth and yield. Here, we review recent advances in understanding how nucleotide-binding domain, leucine-rich repeat (NLR) receptors and cell wall-associated kinase (WAK) proteins function in balancing immunity and yield. We also discuss the role of plant hormones and transcription factors in regulating the trade-offs between plant growth and immunity. Finally, we describe how a novel mechanism of translational control of defense proteins can enhance immunity without the reduction in fitness. Copyright © 2017 Elsevier Ltd. All rights reserved.

Motivating First-Year University Students by Interdisciplinary Study Projects

ERIC Educational Resources Information Center

Koch, Franziska D.; Dirsch-Weigand, Andrea; Awolin, Malte; Pinkelman, Rebecca J.; Hampe, Manfred J.

2017-01-01

In order to increase student commitment from the beginning of students' university careers, the Technische Universität Darmstadt has introduced interdisciplinary study projects involving first-year students from the engineering, natural, social and history, economics and/or human sciences departments. The didactic concept includes sophisticated…

Science and Technology Libraries Section. Special Libraries Division. Papers.

ERIC Educational Resources Information Center

International Federation of Library Associations, The Hague (Netherlands).

Papers on science and technology library and information services presented at the 1982 International Federation of Library Associations (IFLA) conference include: (1) "The Central Subject Libraries of the Federal Republic of Germany--For Example: The Technische Informationsbibliothek Hannover" by Gerhard Schlitt and Jobst Tehnzen; (2)…

"I Myself Want to Build": Women, Architectural Education and the Integration of Germany's Technical Colleges

ERIC Educational Resources Information Center

Stratigakos, Despina

2007-01-01

This article reconstructs women's entry into the architecture classrooms of Germany's "Technische Hochschulen," which were, and remain, the nation's primary institutions for training architects. Created in the 1860s and '70s to supply an industrializing nation with well-educated engineers and building officials, these elite colleges…

Physik gestern und heute: Visualisierung mit der Schlierenmethode

NASA Astrophysics Data System (ADS)

Heering, Peter

2006-07-01

Der Name des österreichischen Forschers Ernst Mach ist heute noch mit der Schallgeschwindigkeit verbunden. Diese Auszeichnung resultiert aus Machs Untersuchungen, wie sich Projektile mit Überschallgeschwindigkeit durch die Luft bewegen. Gerade in jüngster Zeit hat die Anwendung derartiger Methoden durch technische Modifikationen wieder einen Aufschwung erfahren.

A Course on Reconfigurable Processors

ERIC Educational Resources Information Center

Shoufan, Abdulhadi; Huss, Sorin A.

2010-01-01

Reconfigurable computing is an established field in computer science. Teaching this field to computer science students demands special attention due to limited student experience in electronics and digital system design. This article presents a compact course on reconfigurable processors, which was offered at the Technische Universitat Darmstadt,…

Betriebsführung multimodaler Energiesysteme

NASA Astrophysics Data System (ADS)

Mackensen, Reinhard

Die Transformation des Energiesystems von einer zentral geprägten, unidirektional orientierten und in unterschiedliche Sektoren separierten Struktur hin zu einer umfassenden, multimodalen, dezentralen und flexiblen Erzeuger- und Verbraucherlandschaft findet auf verschiedenen Ebenen statt. Randbedingung bei dieser Umwälzung ist immer die Einhaltung der Teilziele Versorgungssicherheit, Wirtschaftlichkeit und Effizienz. Im Einzelnen schlägt sich diese Transformation in einer Diversifizierung der Akteurslandschaft durch die Mechanismen des Unbundling nieder. Weiterhin finden eine Dezentralisierung der Erzeugerlandschaft und damit eine Substitution von mehrheitlich fossil betriebener Großkraftwerkstechnologie durch eine Vielzahl dezentraler Erzeuger mit zumeist regenerativem Charakter statt. Dieser Wandel hat im Wesentlichen zwei Hauptkonsequenzen. Zum einen ergeben sich durch dezentrale, flächige Verteilung der Erzeuger neue Anforderungen an den Energieaustausch, bspw. aus der Erweiterung der Stromnetze für einen bidirektionalen Energieaustausch, zum anderen werden Abstimmungsmechanismen erforderlich, welche die fluktuierende Einspeisung derart mit dem Verbrauch in Waage hält, dass sowohl elektrische Netzrestriktionen, die Qualität der Versorgung und Aspekte der Energieeffizienz und damit der Wirtschaftlichkeit berücksichtigt werden. Mögliche Antworten auf die mit dieser Betrachtung einhergehenden Fragen liegen in der Konzeption eines multimodalen Energiesystems, also in der Gesamtbetrachtung der Sektoren Strom, Wärme und Verkehr. Dieses Kapitel soll Mechanismen darlegen und Wege aufzeigen, wie eine solche Konzeption gestaltet werden kann und wie solche komplexen Systeme in der Praxis betrieben werden können.

Editorial

NASA Astrophysics Data System (ADS)

Schiwietz, Gregor; Klaumünzer, Siegfried; Mahnke, Heinz-Eberhard

2007-03-01

This NIM-B issue contains the Proceedings of the 22nd International Conference on Atomic Collisions in Solids (ICACS-22) held in the main building of the Technische Universität Berlin (Strasse des 17.Juni 135, 10623 Berlin, Germany) from the 21st until the 26th of July 2006.

Educating Educators in a Volatile Climate--The Challenge of Modernising Higher Business Schools in Serbia and Montenegro

ERIC Educational Resources Information Center

Hollinshead, Graham

2006-01-01

This study is set in the rapidly changing higher educational environment that has ensued in Serbia and Montenegro in the post Milosevic era. Its primary focus is a "Training Trainers" initiative, mounted by the GTZ (Deutsche Gesellschaft fur Technische Zusammenarbeit/Society for Technical Co-operation), designed to upgrade the teaching…

"Crafts and Technology" and "Technical Education" in Austria

ERIC Educational Resources Information Center

Seiter, Josef

2009-01-01

In Austria, the syllabus for "Technisches Werken/Crafts and Technology" for all types of school in general education was issued more than 30 years ago. The authors believed that it might lay the foundations for technical literacy. The paper is about how the situation of the subject and, with it, technical education has developed since…

Toekomstige Radiocommunicatie in OVO (Soon-to-be Radiocommunication in OVG)

DTIC Science & Technology

2004-12-01

Delft, The Netherlands Brassersplein 2, Delft, The Netherlands 33538 9 . SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES 10. SPONSORING/MONITORING...AGENCY REPORT NUMBER KCenGM Prins Bernhardkazeme, Barchman Wuytierslaan 198, Amersfoort, The Netherlands TD04-0463 11 . SUPPLEMENTARY NO TES Text in...perationeel-technische criteria ............................................................ 9 3. Wireless Local Area Networks (WLANs) en militaire

Empowering Indigenous Languages and Cultures: The Impact of German Bilateral Assistance in Latin America

ERIC Educational Resources Information Center

Cortina, Regina

2010-01-01

Working in Latin America for several decades to address the educational needs of poor and indigenous groups, the GTZ (Gesellschaft fur Technische Zusammenarbeit) has helped to develop the knowledge base of intercultural bilingual education. The goal of this article is to analyze Germany's impact from the mid-1970s to the present as the GTZ has…

First NATO/SIBCA Exercise in Sampling of Chemical Warfare Agents (Eerste NATO/SIBCA-oefening in monstername van chemische strijdmiddelen).

DTIC Science & Technology

1998-01-01

TNO-rapport PML1997-A81 Eerste NATO/SIBCA-oefening in monster- name van chemische strijdmiddelen TNO Prins Maurits Laboratorium Lange Kleiweg...27 Aantal pagina’s : 53 (incl. bijlagen, excl. RDP & distributielijst) Aantal bijlagen : 4 TNO Prins Maurits Laboratorium is onderdeel...van de hoofdgroep TNO Defensieonderzoek waartoe verder behoren: TNO Fysisch en Elektronisch Laboratorium TNO Technische Menskunde Nederlandse

CAD in der Praxis

NASA Astrophysics Data System (ADS)

Labisch, Susanna

Konstruktion und Fertigung erfolgen in der Praxis fast ausschließlich rechnerunterstützt. Mit diesem Rechnereinsatz beim Konstruieren (CAD, Computer Aided Design) und Fertigen CAM (Computer Aided Manufacturing) scheint die technische Zeichnung an Bedeutung zu verlieren, da die Verständigung zwischen Konstruktions- und Fertigungsabteilung primär durch den Austausch digitaler Daten erfolgen kann.

Grundlagen der zeichnerischen Darstellung

NASA Astrophysics Data System (ADS)

Döring, Peter

Eine Technische Zeichnung muss nach DIN 6774 Teil 1 in der Weise angefertigt werden, dass sie übersichtlich, unmissverständlich, auch in verkleinertem Maßstab lesbar bleibt, kostengünstig reproduzierbar und dauerhaft archivierbar ist. Zu dem Zweck benötigt man entsprechendes Papier und angepasstes Zeichengerät. Heute ist die Anfertigung mit entsprechenden Rechnerprogrammen möglich.

Company Decontamination Systems (Compagnieontsmettingssystemen)

DTIC Science & Technology

1998-06-01

TNO-rapport Compagnieontsmettingssystemen PML 1998-AI08 TNO Prins Maurits Laboratorium Lange Kleiweg 137 Datum Postbus 45 2280 AA Rijswijk juni 1999...I8ECTED 4 TNO Prins Maurits Laboratorium is onderdeel _____ van de hoofdgroep TNO Defensieonderzoek waartoe verder behoren: TNO Fysisch en...Elektronisch Laboratorium Nederlandse Organisatie voor toegepast- TNO Technische Menskunde natuurwetenschappelijk onderzoek TNO TNO-rapport PML 1998-A108 2

The Technical Information Library: TIB

NASA Technical Reports Server (NTRS)

Rosemann, Uwe

1994-01-01

The Technische Informationsbibliothek Hannover (TIB) is the German national central library for all areas of technology and related sciences, especially chemistry, computer science, mathematics, and physics. The TIB acquires and makes available a comprehensive collection of conventional and non-conventional literature, especially foreign material, with particular emphasis on specialized new publications which are difficult to obtain or in difficult languages.

Studies on Instabilities in Long-Baseline Two-Way Satellite Time and Frequency Transfer (TWSTFT) Including a Troposphere Delay Model

DTIC Science & Technology

2007-11-01

TRANSFER ( TWSTFT ) INCLUDING A TROPOSPHERE DELAY MODEL D. Piester, A. Bauch Physikalisch-Technische Bundesanstalt (PTB) Bundesallee 100...Abstract Two-way satellite time and frequency transfer ( TWSTFT ) is one of the leading techniques for remote comparisons of atomic frequency standards...nanosecond level. These achievements are due to the fact that many delay variations of the transmitted signals cancel out in TWSTFT because of the

The Planck-Balance—using a fixed value of the Planck constant to calibrate E1/E2-weights

NASA Astrophysics Data System (ADS)

Rothleitner, C.; Schleichert, J.; Rogge, N.; Günther, L.; Vasilyan, S.; Hilbrunner, F.; Knopf, D.; Fröhlich, T.; Härtig, F.

2018-07-01

A balance is proposed, which allows the calibration of weights in a continuous range from 1 mg to 1 kg using a fixed value of the Planck constant, h. This so-called Planck-Balance (PB) uses the physical approach of Kibble balances that allow the Planck constant to be derived from the mass. Using the PB no calibrated mass standards are required during weighing processes any longer, because all measurements are traceable via the electrical quantities to the Planck constant, and to the meter and the second. This allows a new approach of balance types after the expected redefinition of the SI-units by the end of 2018. In contrast to many scientific oriented developments, the PB is focused on robust and daily use. Therefore, two balances will be developed, PB2 and PB1, which will allow relative measurement uncertainties comparable to the accuracies of class E2 and E1 weights, respectively, as specified in OIML R 111-1. The balances will be developed in a cooperation of the Physikalisch-Technische Bundesanstalt (PTB) and the Technische Universität Ilmenau in a project funded by the German Federal Ministry of Education and Research.

Grundlegende Steuerungsverfahren im heterogenen Logistiknetz mit Kanban

NASA Astrophysics Data System (ADS)

Dickmann, Eva; Dickmann, Philipp; Lödding, Hermann; Möller, Niklas; Rücker, Thomas; Schneider, Herfried M.; Zäh, Michael F.

In vielen Unternehmen werden heterogene (verschiedene) Steuerungen in einem abgestimmten Konzept kombiniert. Je nach Anwendungsfall und Rahmenbedingungen werden Kombinationen allgemein bekannter Steuerungen oder Steuerungsvarianten gemischt eingesetzt, um eine optimale Steuerung für unterschiedliche Fälle zu erreichen. Hierbei stehen neben den bekannten und weit verbreiteten Methoden, wie Material Requirements Planning (MRP) oder Kanban, auch weniger bekannte oder neue Methoden zur Auswahl, wie die Produktionssteuerung mit dezentraler, bestandsorientierter Fertigungsregelung (DBF). Kanban ist ein simples und effizientes Steuerungskonzept, das in der klassischen Form für spezifische einfache Anwendungsfälle umsetzbar ist. Hochentwickelte Steuerungsalgorithmen können helfen, komplexe Abläufe optimal abzubilden. Mit einer grundlegenden Vereinfachung der Abläufe kann allerdings in vielen Fällen ein wesentlich stärkerer und umfassender Verbesserungseffekt erzielt werden. Die wesentliche Fragestellung sollte folglich lauten: Warum ist der Ablauf nicht mit einer einfachen Steuerung wie Kanban abzubilden? Um die Vorteile des Konzepts auch in untypischen Bereichen anwenden zu können, sind jedoch verschiedene Varianten oder Kanban-ähnliche Steuerungsmethoden entstanden. Darüber hinaus sind in der Praxis hybride Steuerungen im Einsatz, welche so kombiniert werden, dass die Zusammensetzung anspruchsvolle Eigenschaftsbilder noch exakt abbildet. In der Praxis basieren die Steuerungsentscheidungen nur zu einem kleinen Teil auf den eigentlichen Steuerungsalgorithmen, wie sie uns das MRP-System zur Verfügung stellt. Moderne Steuerungswelten" schließen alle relevanten Informationsquellen in eine heterogene Entscheidungsmatrix mit ein. Letztlich zählt nicht, ob die Entscheidung auf den Informationen aus dem MRP-System oder auf Softfacts basierend getroffen wurde, sondern nur, ob die Entscheidung erfolgreich war.

Lokalisatie Maskergelaatslekkage (Localization of Face-Seal Leak Sites)

DTIC Science & Technology

2004-03-01

2004-A 12 TNO Prins Maurits Laboratorium Lokallisatie Maskergellaatslekkage DISTRIBUTION STATEMENT A Approved for Public Release Lange Kleiweg 137 Datum...1 /- O 9 TNO Prins Maurits Laboratorium is onderdeel van de hoofdgroep TNO Defensieonderzoek waartoe verder b~ehoren: TNO Fysisct en Elektronisch... Laboratorium Nedertandse Organisatie voor toegepast- TNO Te~chnische Menakunde natuurwetenschaDpeliik onderzoek TNO TNO Prn Ma rt LA. mu * s gg 2

Digital Transformation Canvas - Übersicht behalten und Handlungsfelder gestalten

NASA Astrophysics Data System (ADS)

Köster, Michael; Mache, Tobias

Im Beitrag "Digital Transformation Canvas - Übersicht behalten und Handlungsfelder gestalten" wird zunächst grob auf die wesentlichen Herausforderungen, die mit der zunehmenden Digitalisierung einhergehen, eingegangen. Anschließend werden ausgewählte Konzepte des Business Transformation Management vorgestellt, die sich mit der grundlegenden Weiterentwicklung von Organisationen - wie es die Digitalisierung erfordert - auseinandersetzen. Eine detaillierte Einführung in die Methodik des Business Transformation Canvas, der sich mit den unterschiedlichsten Gestaltungsfeldern der Transformation auseinandersetzt und ein Framework für Transformationsprojekte darstellt, rundet den Beitrag ab. Er schließt mit einem Fazit und Ausblick.

Normzahlen, Toleranzen, Passungen

NASA Astrophysics Data System (ADS)

Böge, Gert; Böge, Wolfgang

Vor allem wegen der Kosten ist es sinnvoll, sich beim Festlegen von Maßen aller Art auf Vorzugszahlen zu beschränken (Baugrößen, Drehzahlen, Drehmomente, Leistungen, Drücke usw.). Man verwendet dazu eine geometrisch gestufte Zahlenfolge (siehe Teil Mathematik). Abb. 40.1 zeigt, dass bei der geometrischen Stufung die Werte im unteren Bereich fein, im oberen grob gestuft sind. Das ist nicht nur technisch sinnvoll.

Transition Control with Dielectric Barrier Discharge Plasmas

DTIC Science & Technology

2010-10-01

AFRL-AFOSR-UK-TR-2011-0007 Transition Control with Dielectric Barrier Discharge Plasmas Cameron Tropea Technische...Discharge Plasmas 5a. CONTRACT NUMBER FA8655-08-1-3032 5b. GRANT NUMBER Grant 08-3032 5c. PROGRAM ELEMENT NUMBER 61102F 6. AUTHOR(S...is to control natural boundary-layer transition through the use of plasma actuators. Transition delay or even suppression has its merits not only in

Proceedings of the Second European Conference on Cognitive Modelling

DTIC Science & Technology

1998-04-04

student record contains a field for the student’s Social Security Number (SSN), which is displayed on the screen. To retrieve information about this...Cambridge, Massachusetts: MIT Press. Chandler, M. J., & Boyes, M. (1982). Social -Cogni- tive Development. In B. B. Wolman (Ed.), Hand- book of...Effecten van vermoeidheid als functie van soort taak en sociale omgeving. TNO-rapport TM 1994 A-9, TNO Technische Menskunde, Postbus 23, 3769 ZG

The nature of reality represented in high fidelity human patient simulation: philosophical perspectives and implications for nursing education.

PubMed

Dunnington, Renee M

2014-01-01

Simulation technology is increasingly being used in nursing education. Previously used primarily for teaching procedural, instrumental, or critical incident types of skills, simulation is now being applied to training related to more dynamic, complex, and interpersonal human contexts. While high fidelity human patient simulators have significantly increased in authenticity, human responses have greater complexity and are qualitatively different than current technology represents. This paper examines the texture of representation by simulation. Through a tracing of historical and contemporary philosophical perspectives on simulation, the nature and limits of the reality of human health responses represented by high fidelity human patient simulation (HF-HPS) are explored. Issues concerning nursing education are raised around the nature of reality represented in HF-HPS. Drawing on Waks, a framework for guiding pedagogical considerations around simulation in nursing education is presented for the ultimate purpose of promoting an educative experience with simulation. © 2013 John Wiley & Sons Ltd.

Conference Digest - International Conference on Infrared and Millimeter Waves (13th) Held in Honolulu, Hawaii on 5-9 December 1988. Volume 1039.

DTIC Science & Technology

1989-12-09

and anodized aluminum to stability of the prebunching cavities is a suppress emission on the remainder of the cathode, difficult constraint...with means of a thick, aluminum anode plate, and 2) a lower a (0.2 -0.3). A wiggler has been utilized to thin stainless steel anode plate, field shaping...Omar DUCTOR OXIDES - S. Yoshimori and M. Kawamura, Dept rf and K. Schiinemann, Technische Universitit Hamburg-Harburg, Physical Elec, Faculty of Engr

Payload specialist Wubbo Ockels in new sleeping restraint

NASA Image and Video Library

1985-10-30

61A-08-018 (30 Oct.-6 Nov. 1985) --- Wubbo J. Ockels, a Dutch scientists representing the European Space Agency (ESA), crawls from an unique sleeping restraint in D-1 science module. Unlike the other crewmembers on STS 61A, Ockels did not sleep in the middeck of the Challenger. Ockels proposed this concept of sleeping facility and the actual hardware was developed by the Technisch Natur Wetenschappelyk Onderzoek (TNO), a Dutch government organization.

RADIATION BIOLOGY AND ISOTOPE UTILIZATION IN APPLIED BOTANY (in German)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glubrecht, H.

A short survey is given of the problems being studied in the Institute for Radiation Biology in the Technische Hochschule in Hannover. Extensive data are presented on a method of studying the effect of ionizing radiation on plant cells with the aid of UV microspectroscopy. From the change in UV absorption in ranges of a few mu , conclusions can be drawn as to the probability of primary ionizations in protein molecules and nucleic acids. (auth)

Physik gestern und heute Von der Metallstange zum Hochenergielaser

NASA Astrophysics Data System (ADS)

Heering, Peter

2002-05-01

Im Mai 1752 wurde in Marly bei Paris auf Anregung des amerikanischen Forschers und Politikers Benjamin Franklin erstmals die elektrische Natur des Blitzes nachgewiesen. Damals beschrieb Franklin auch eine technische Vorrichtung, die als Schutz von Gebäuden vor Blitzschlägen dienen sollte: den Blitzableiter. Diese aus heutiger Sicht scheinbar triviale Vorrichtung wurde aber keineswegs unmittelbar akzeptiert. Und bis heute ist die Forschung zum Schutz von Einrichtungen vor Blitzschlägen nicht abgeschlossen.

Digitalisierung in der Energiewirtschaft - empirische Untersuchung und Wertschöpfungskette

NASA Astrophysics Data System (ADS)

Dell, Timo

Die Energiewirtschaft nutzt seit je her digitale Strukturen zur Umsetzung ihrer Prozesse. Durch den (neuen) verabschiedeten politischen Ordnungsrahmen - dem Gesetz zur Digitalisierung der Energiewende - und durch die rasante Fortentwicklung technologischer Strukturen ergeben sich jedoch die Wertschöpfungsstufen erweiternde, diversifizierende und innovative Möglichkeiten für Energieversorger (EVU) Geschäftsfelder auszubauen bzw. neue zu erschließen. Dabei ist die digitale (R)Evolution keine rein technische Umsetzung, sondern insbesondere auch eine unternehmensinterne, strategische und intern-kulturelle Herausforderung.

Evidence for Solar Influences on Nuclear Decay Rates

DTIC Science & Technology

2010-07-01

collected at Brookhaven National Laboratory ( BNL ) measuring 32Si and 36Cl,2,3,5–7 and 226Ra data collected at the Physikalisch-Technische Bundesanstalt...conditions. In what follows we present several arguments against a simplistic, systematic explanation of the BNL and PTB data fluctuations in terms of...any known seasonal environmental effect.4 (2) In both the BNL experiment, which studied 32Si and 36Cl in the same detector,7 and the CNRC (Children’s

Mikrospritzgießen

NASA Astrophysics Data System (ADS)

Ebert, Karl-Herbert; Ammer, Daniel; Hoffstetter, Marc; Wintermantel, Erich

Bei der Betrachtung von aktuellen Produktentwicklungen lässt sich durch alle Branchen hinweg ein deutlicher Trend zur Miniaturisierung und Funktionsintegration auf kleinstem Raum erkennen. Der Einsatz technischer Kunststoffe, die überwiegend im Thermoplast-Spritzgießverfahren verarbeitet werden, leistet dabei einen wichtigen Beitrag um diese Produktentwicklungen in marktfähige Artikel umsetzen zu können. Hierbei sind im Vergleich zum Standardspritzgießen einige Besonderheiten hinsichtlich des Formenbaus, der Anlagen- sowie Prozesstechnik und der Qualitätssicherung zu beachten.

Elektrische Energieversorgung

NASA Astrophysics Data System (ADS)

Schulz, Detlef

Nur mit einer zuverlässigen und wirtschaftlichen elektrischen Energieversorgung ist eine nachhaltige gesellschaftliche Entwicklung von Industrienationen möglich. Gleichzeitig muss diese selbst so nachhaltig, d. h. umweltverträglich gestaltet werden, dass auch zukünftige Generationen nicht in ihrer Entfaltung behindert werden. Eine versorgungssichere, wirtschaftliche und umweltverträgliche Energiebereitstellung ergibt sich nicht zwingend allein aus einer technisch evolutionären Entwicklung und ist auch bis heute nicht ausschließlich nur mit einer der bekannten Wandlungstechnologien nachweislich realisierbar.

Bewertung von Fahrzeuggeräuschen

NASA Astrophysics Data System (ADS)

Genuit, Klaus; Schulte-Fortkamp, Brigitte; Fiebig, André; Haverkamp, Michael

Bei der Wahrnehmung und Beurteilung eines Automobils sind unzählige Merkmale und Eigenschaften von Bedeutung. Dabei können Merkmale objektiv-technisch beschrieben werden, wie Angaben zur Motorisierung, Höchstgeschwindigkeit, Drehmoment, zulässige Zuladung, Verbrauch usw. Daneben sind weitere Eigenschaften von Bedeutung, die sich einer einfachen objektiv-technischen Beschreibung entziehen. Hier sind Begriffe zu nennen, wie Sicherheit, allgemeine Qualitätsanmutung, Design, Ergonomie, Komfort, Haptik, Fahrdynamik, Zuverlässigkeit, die deutlich schwieriger objektiv erfassbar und beschreibbar sind (Abb. 4.1).

PREFACE: 15th International Conference on the Strength of Materials (ICSMA-15)

NASA Astrophysics Data System (ADS)

Skrotzki, Werner; Oertel, Carl-Georg; Biermann, Horst; Heilmaier, Martin

2010-04-01

. This is a very good ratio showing that we could attract the young generation. There have been 272 oral and 135 poster presentations. It is our pleasure to thank the members of the International ICSMA Committee for their valuable help, especially for proposing and choosing the 18 plenary speakers. 187 papers were submitted for publication in the proceedings, 167 were accepted after reviewing. We would like to express our thanks to all referees for their efficient and prompt efforts. We acknowledge particularly support from the German Research Society (DFG), the Saxon Ministry for Science and Art and the City of Dresden. We are also grateful for industrial support from PLANSEE Metall GmbH, Goodfellow GmbH, MTS Systems GMB, Nagoya University and IOP Publishing. Finally we thank all members of the Local Organizing Committee, Intercom Dresden and Conwerk / Laboratory Ten for the excellent organization of ICSMA 15 and the very pleasant collaboration. During the conference the International ICSMA Committee decided to convene the next conference in Bangalore, India, in 2012. We wish the organizers of ICSMA 16 great success and look forward to meeting you in Bangalore. Werner Skrotzki (Technische Universität Dresden) Carl-Georg Oertel (Technische Universität Dresden) Horst Biermann (Bergakademie Technische Universität Freiberg) Martin Heilmaier (Technische Universität Darmstadt) Guest Editors Dresden, June 23, 2009 (* Corresponding author; e-mail address: werner.skrotzki@physik.tu-dresden.de)

Technische Systeme für den Herzersatz und die Herzunterstützung

NASA Astrophysics Data System (ADS)

Schöb, Reto; Loree, Howard M.

Herzkrankheiten verursachen allein in den Vereinigten Staaten jährlich mehr als 700’000 Todesfälle. Ungefähr 3 Millionen Patienten in den U.S.A. leiden gemäss der American Heart Association (AHA) und dem National Heart, Lung and Blood Institute (NHLBI) an kongestivem Herzversagen (Congestive Heart Failure, CHF), welches eine chronische, sehr entkräftende und degenerative Krankheit ist: Das Herz ist dabei unfähig, hinreichend Blut zu den Organen des Körpers zu pumpen. Über 400’000 Fälle von CHF werden jedes Jahr diagnostiziert. Ähnliche Zahlen werden für Europa und Japan zusammen geschätzt. Basierend auf Daten vom AHA und NHLBI beträgt die fünfjährige Überlebensrate für CHF-Patienten lediglich etwa 50% [1]. 70’000-120’000 dieser Patienten könnten von einer Herzverpflanzung profitieren. 1999 wurden in den USA aber nur 2185 Herztransplantationen durchgeführt während die Warteliste über 4000 Patienten beträgt [2]. Ein akuter Mangel an Spenderherzen und die enormen Kosten (250’000-400’000 USD pro Patient) sind die begrenzenden Faktoren für Herztransplantationen [3]. Dies bedeutet, dass eine riesige Anzahl von Patienten durch ein zuverlässiges und verschleissfreies, nichtthrombotisches, total implantierbares, künstliches Herz gerettet werden könnten. Bis heute jedoch kein derartiges Implantat kommerziell verfügbar.

Optical-Fiber Power Meter Comparison Between NIST and PTB.

PubMed

Vayshenker, I; Haars, H; Li, X; Lehman, J H; Livigni, D J

2003-01-01

We describe the results of a comparison of reference standards between the National Institute of Standards and Technology (NIST-USA) and Physikalisch-Technische Bundesanstalt (PTB-Germany) at nominal wavelengths of 1300 nm and 1550 nm using an optical-fiber cable. Both laboratories used thermal detectors as reference standards. A novel temperature-controlled, optical-trap detector was used as a transfer standard to compare two reference standards. Measurement results showed differences of less than 1.5 × 10(-3), which is within the combined uncertainty for both laboratories.

Nanomeasuring and nanopositioning engineering

NASA Astrophysics Data System (ADS)

Jäger, G.; Hausotte, T.; Manske, E.; Büchner, H.-J.; Mastylo, R.; Dorozhovets, N.; Hofmann, N.

2006-11-01

The paper describes traceable nanometrology based on a nanopositioning machine with integrated nanoprobes. The operation of a high-precision long range three-dimensional nanopositioning and nanomeasuring machine (NPM-Machine) having a resolution of 0,1 nm over the positioning and measuring range of 25 mm x 25 mm x 5 mm is explained. An Abbe offset-free design of three miniature plan mirror interferometers and applying a new concept for compensating systematic errors resulting from mechanical guide systems provide very small uncertainties of measurement. The NPM-Machine has been developed by the Institute of Process Measurement and Sensor Technology of the Technische Universitaet Ilmenau and manufactured by the SIOS Messtechnik GmbH Ilmenau. The machines are operating successfully in several German and foreign research institutes including the Physikalisch-Technische Bundesanstalt (PTB), Germany. The integration of several, optical and tactile probe systems and nanotools makes the NPM-Machine suitable for various tasks, such as large-area scanning probe microscopy, mask and wafer inspection, nanostructuring, biotechnology and genetic engineering as well as measuring mechanical precision workpieces, precision treatment and for engineering new material. Various developed probe systems have been integrated into the NPM-Machine. The measurement results of a focus sensor, metrological AFM, white light sensor, tactile stylus probe and of a 3D-micro-touch-probe are presented. Single beam-, double beam- and triple beam interferometers built in the NPM-Machine for six degrees of freedom measurements are described.

Smart Home, Smart Grid, Smart Meter - digitale Konzepte und das Recht an Daten

NASA Astrophysics Data System (ADS)

Spiecker genannt Döhmann, Indra

Modernes Energiemanagement setzt auf ein intelligent gesteuertes Energieinformationsnetz, das Smart Grid. In diesem ist der Smart Meter, die intelligente Messstelle beim Nutzer, ein zentrales Instrument für den wechselseitigen Austausch von Informationen. Allerdings werfen die über diverse Gesetze forcierten Informationsströme erhebliche datenschutzrechtliche Fragen auf. Der Beitrag stellt zentrale datenschutzrechtliche Leitlinien und Probleme vor und behandelt auch offene Fragestellungen.

Hochauflösendes Monitoring von Karst-Grundwasserressourcen beiderseits des Jordangrabens - Konzepte und Anwendungsbeispiele

NASA Astrophysics Data System (ADS)

Schmidt, Sebastian; Grimmeisen, Felix; Ries, Fabian; Goldscheider, Nico; Sauter, Martin

2018-03-01

In the semi-arid eastern Mediterranean water supply is highly dependent on karst aquifers. The region is characterized by multi-year dry and wet cycles combined with high hydrological dynamics, especially during intense precipitation events. The investigated karst regions in the West Bank and Jordan are experiencing strong urbanization within the groundwater catchments and hence a rising impact on water quality. Therefore, high resolution monitoring data are required for the assessment of available water resources and the hydrogeological characterization of the karst systems. These measurements are focused on the (natural) meteorological input signals and the system output signals at the karst springs. Also soil moisture and ephemeral runoff dynamics are investigated. The monitoring data enable (1) hydrogeological characterization of the aquifers, (2) estimation of groundwater recharge via soil water balance and reservoir models, and (3) assessment of contamination dynamics in groundwater (e. g. nitrate and E. coli concentrations), allowing an optimized raw water management. Several examples illustrate the importance of high-resolution hydrological monitoring data.

Long-range nanopositioning and nanomeasuring machine for application to micro- and nanotechnology

NASA Astrophysics Data System (ADS)

Jäger, Gerd; Hausotte, Tino; Büchner, Hans-Joachim; Manske, Eberhard; Schmidt, Ingomar; Mastylo, Rostyslav

2006-03-01

The paper describes the operation of a high-precision long range three-dimensional nanopositioning and nanomeasuring machine (NPM-Machine). The NPM-Machine has been developed by the Institute of Process Measurement and Sensor Technology of the Technische Universität Ilmenau. The machine was successfully tested and continually improved in the last few years. The machines are operating successfully in several German and foreign research institutes including the Physikalisch-Technische Bundesanstalt (PTB). Three plane mirror miniature interferometers are installed into the NPM-machine having a resolution of less than 0,1 nm over the entire positioning and measuring range of 25 mm x 25 mm x 5 mm. An Abbe offset-free design of the three miniature plane mirror interferometers and applying a new concept for compensating systematic errors resulting from mechanical guide systems provide extraordinary accuracy with an expanded uncertainty of only 5 - 10 nm. The integration of several, optical and tactile probe systems and nanotools makes the NPM-Machine suitable for various tasks, such as large-area scanning probe microscopy, mask and wafer inspection, nanostructuring, biotechnology and genetic engineering as well as measuring mechanical precision workpieces, precision treatment and for engineering new material. Various developed probe systems have been integrated into the NPM-Machine. The measurement results of a focus sensor, metrological AFM, white light sensor, tactile stylus probe and of a 3D-micro-touch-probe are presented. Single beam-, double beam- and triple beam interferometers built in the NPM-Machine for six degrees of freedom measurements are described.

Instandhaltungsmanagement als Gestaltungsfeld Ganzheitlicher Produktionssysteme

NASA Astrophysics Data System (ADS)

Dombrowski, Uwe; Schulze, Sven; Otano, Isabel Crespo

Sich kontinuierlich verändernde Rahmenbedingungen, wie beispielsweise eine steigende Variantenvielfalt, verkürzte Produktlebenszyklen sowie Kundenforderungen nach höherer Qualität, kürzeren Lieferzeiten und geringeren Kosten, fordern von produzierenden Unternehmen eine stetige Anpassung der Prozesse, der Organisation und der Strukturen. Seit den 90er Jahren versuchen immer mehr deutsche Unternehmen diesen veränderten Anforderungen mit der Einführung eines Ganzheitlichen Produktionssystems (GPS) zu begegnen. Ganzheitliche Produktionssysteme sind dabei in ihren Grundlagen an das Toyota Produktionssystem angelehnt, vereinigen aber auch weitere Methoden zu einem unternehmensspezifischen Regelwerk. Im Rahmen des langfristigen Trends zu unternehmensindividuellen Produktionssystemen wird sowohl in der Industrie als auch in der Forschung intensiv über das Toyota Produktionssystem, Lean Production, Lean Management und Ganzheitliche Produktionssysteme diskutiert, werden Konzepte zu Implementierung und Betrieb erstellt und die Wirtschaftlichkeit untersucht.

Visualisierung analoger Schaltungen durch 3-D Animation von transienten SPICE-Simulationen

NASA Astrophysics Data System (ADS)

Becker, J.; Manoli, Y.

2007-06-01

Für das Zeichnen analoger Schaltpläne wird oft versucht, die Potentialverteilung in der entsprechenden Schaltung auszunutzen, um eine Platzierung der Bauteile nach abfallendem Potential vorzunehmen. Mit Hilfe von Computerunterstützung gelingt es, eine verallgemeinerte dreidimensionale Platzierungsstrategie anzuwenden, die allein auf Grund der Potentialwerte einer Schaltung die automatische Generierung einer technisch exakten Potentialdarstellung erlaubt. Somit ist es möglich, die Ergebnisse von transienten SPICE-Simulationen in jedem Zeitschritt darzustellen und eine Animation des zeitlichen Verhaltens zu erzeugen. Die Umsetzung dieser Methode zur Einbettung in eine webbasierte Lern - und Arbeitsplattform wird im Folgenden erläutert.

Chips aus Plastik: Organische Elektronik

NASA Astrophysics Data System (ADS)

Kiy, Michael

2003-01-01

Künstliche organische Materialien werden in Zukunft vermehrt in der Elektronik eingesetzt werden. Obwohl sie gute Isolatoren sind, kann ein ausreichend großes elektrisches Feld in ihnen einen elektrischen Strom fließen lassen. Dazu injizieren Metallelektroden freie Ladungsträger wie Elektronen oder Löcher in das organische Material. Diese Ladungsträgerinjektion kann die elektrischen Eigenschaften geeigneter organischer Materialien vom Isolator bis zum Leiter steuern. Eine zukünftige Domäne solcher Kunststoffe werden einfache, billige Chips sein. Bei den Displays könnten sie bald die konventionellen Flüssigkristallanzeigen technisch überflügeln.

Hydrogel research in Germany: the priority programme, Intelligent Hydrogels

NASA Astrophysics Data System (ADS)

Wallmersperger, Thomas; Sadowski, Gabriele

2009-03-01

The priority programme "Intelligent Hydrogels" was established by the German Research Foundation (DFG) in 2006 in order to strengthen the hydrogel-related research in Germany. The programme is being coordinated by Gabriele Sadowski, Technische Universität Dortmund. The aim of this priority programme is to develop new methods for the synthesis and characterization of smart hydrogels and to develop new modelling strategies in order to a) prepare the hydrogels for special applications and/or b) to develop and extend their capabilities for any desired use. In this programme, 73 scientists (36 professors and 37 scientific assistants/PhD students) from all over Germany are involved, working in 23 projects.

Integriertes Informationsmanagement am KIT Was bleibt? Was kommt?

NASA Astrophysics Data System (ADS)

Labitzke, Sebastian; Nussbaumer, Martin; Hartenstein, Hannes; Juling, Wilfried

Der Beitrag beschreibt wesentliche seit dem Jahr 2005 an der Universität Karlsruhe bzw. am Karlsruher Institut für Technologie erzielte Ergebnisse in Bezug auf technische und organisatorische Integration für das Informationsmanagement. Insbesondere stehen die Portaldienste und das Identitätsmanagement im Fokus der technischen Innovation. Daneben werden zwei organisatorische Innovationen vorgestellt, die sich dediziert Fragestellungen zur IT-Governance und IT-Compliance widmen. Abschließend werden erzielte Schlüsselerfahrungen diskutiert, die im Zuge des Aufbaus eines integrierten Informationsmanagements gemacht wurden. Ausblickend wollen wir einen Bezug zu den allgegenwärtigen Problemstellungen und verbundenen Herausforderungen derartiger Vorhaben aufzeigen - Herausforderungen, die waren, sind und bleiben werden.

Grundlagen und Grundbegriffe der Messtechnik

NASA Astrophysics Data System (ADS)

Plaßmann, Wilfried

Es ist eine wesentliche Aufgabe der Messtechnik, technische Vorgänge quantitativ zu erfassen und anhand der gemessenen Größen Funktionsabläufe zu steuern. Als Beispiel sei ein Kraftwerk zur Energieerzeugung genannt, bei dem nur über die Messung von Temperaturen, Leistungen, Drücken und anderen Größen Aussagen über den momentanen Zustand möglich sind und bei Abweichungen vom Sollwert geeignete Eingriffe in das System erfolgen können. Damit eine eindeutige Kommunikation möglich wird, sind die in der Messtechnik verwendeten Begriffe, Messverfahren und Maßeinheiten in entsprechenden Normen oder Vorschriften festgelegt.

Long-term comparisons between two-way satellite and geodetic time transfer systems.

PubMed

Plumb, John F; Larson, Kristine M

2005-11-01

Global Positioning System (GPS) observations recorded in the United States and Europe were used to evaluate time transfer capabilities of GETT (geodetic time transfer). Timing estimates were compared with two-way satellite time and frequency transfer (TWSTFT) systems. A comparison of calibrated links at the U.S. Naval Observatory, Washington, D.C., and Colorado Springs, CO, yielded agreement of 2.17 ns over 6 months with a standard deviation of 0.73 ns. An uncalibrated link between the National Institute of Standards and Technology (NIST) and Physikalisch-Technische Bundesanstalt, Braunschweig, Germany, has a standard deviation of 0.79 ns over the same time period.

Cluster of the Technische Universität Dresden for greenhouse gas and water fluxes

NASA Astrophysics Data System (ADS)

Moderow, Uta; Eichelmann, Uwe; Grünwald, Thomas; Prasse, Heiko; Queck, Ronald; Spank, Uwe; Bernhofer, Christian

2017-04-01

How different land uses change CO2-fluxes under similar climatic conditions is a core question concerning the estimation of carbon sinks. Here, the TUD-cluster forms an excellent basis since it provides long-term measurements of Eddy-Covariance fluxes for different land uses. Measurements started at the Anchor Station Tharandter Wald (Spruce) in 1996. Since then the TUD-cluster has been successively complemented by continuous greenhouse gas flux observatories at Grillenburg (grassland), Klingenberg (crop rotation) and Spreewald (wetland), which have been operated since 2002, 2004 and 2010. The results of the TUD-cluster have been shared internationally in research frameworks such as EUROFLUX and subsequent research frameworks and is now part of ICOS-D (Integrated Carbon Observation System), the German branch to ICOS Europe. This contribution focuses on the presentation of the different sites with comparatively similar climatic conditions but different CO2-fluxes, water fluxes and energy fluxes. Influences of management and climatic conditions will be shown which are apparent in long-term data as well as interesting aspects of distinct land uses.

Volatile anesthetics affect nutrient availability in yeast.

PubMed Central

Palmer, Laura K; Wolfe, Darren; Keeley, Jessica L; Keil, Ralph L

2002-01-01

Volatile anesthetics affect all cells and tissues tested, but their mechanisms and sites of action remain unknown. To gain insight into the cellular activities of anesthetics, we have isolated genes that, when overexpressed, render Saccharomyces cerevisiae resistant to the volatile anesthetic isoflurane. One of these genes, WAK3/TAT1, encodes a permease that transports amino acids including leucine and tryptophan, for which our wild-type strain is auxotrophic. This suggests that availability of amino acids may play a key role in anesthetic response. Multiple lines of evidence support this proposal: (i) Deletion or overexpression of permeases that transport leucine and/or tryptophan alters anesthetic response; (ii) prototrophic strains are anesthetic resistant; (iii) altered concentrations of leucine and tryptophan in the medium affect anesthetic response; and (iv) uptake of leucine and tryptophan is inhibited during anesthetic exposure. Not all amino acids are critical for this response since we find that overexpression of the lysine permease does not affect anesthetic sensitivity. These findings are consistent with models in which anesthetics have a physiologically important effect on availability of specific amino acids by altering function of their permeases. In addition, we show that there is a relationship between nutrient availability and ubiquitin metabolism in this response. PMID:12072454

Gebändigtes Knallgas: Brennstoffzellen im mobilen und stationären Einsatz

NASA Astrophysics Data System (ADS)

Waidhas, Manfred; Landes, Harald

2001-07-01

Die Brennstoffzelle hat aus technischer Sicht einen hohen Stand erreicht. Die PEMFC konnte ihre Zuverlässigkeit in einer Reihe von Nischenanwendungen, aber auch in Form erster mobiler und dezentraler Prototypen beweisen. Die SOFC und die MCFC konnten bereits in Anlagen von 100 kW und mehr in Erprobung gehen. Um jedoch wirtschaftlich konkur-renzfähig zu den etablierten Technologien der mobilen und dezentralen Energiewandlung zu werden, muss noch eine drastische Kostenreduktion sowohl beim Brennstoffzellen-Stack als auch bei den zu seinem Betrieb notwendigen Hilfsaggregaten erreicht werden. Für Fahrzeugantriebe muss außerdem eine Antwort auf die noch offene Treibstofffrage (Infrastruktur, H2-Erzeugung und H2-Speicherung) gefunden werden.

237Np absolute delayed neutron yield measurements

NASA Astrophysics Data System (ADS)

Doré, D.; Ledoux, X.; Nolte, R.; Gagnon-Moisan, F.; Thulliez, L.; Litaize, O.; Roettger, S.; Serot, O.

2017-09-01

237Np absolute delayed neutron yields have been measured at different incident neutron energies from 1.5 to 16 MeV. The experiment was performed at the Physikalisch-Technische Bundesanstalt (PTB) facility where the Van de Graaff accelerator and the cyclotron CV28 delivered 9 different neutron energy beams using p+T, d+D and d+T reactions. The detection system is made up of twelve 3He tubes inserted into a polyethylene cylinder. In this paper, the experimental setup and the data analysis method are described. The evolution of the absolute DN yields as a function of the neutron incident beam energies are presented and compared to experimental data found in the literature and data from the libraries.

Corrections on energy spectrum and scatterings for fast neutron radiography at NECTAR facility

NASA Astrophysics Data System (ADS)

Liu, Shu-Quan; Bücherl, Thomas; Li, Hang; Zou, Yu-Bin; Lu, Yuan-Rong; Guo, Zhi-Yu

2013-11-01

Distortions caused by the neutron spectrum and scattered neutrons are major problems in fast neutron radiography and should be considered for improving the image quality. This paper puts emphasis on the removal of these image distortions and deviations for fast neutron radiography performed at the NECTAR facility of the research reactor FRM- II in Technische Universität München (TUM), Germany. The NECTAR energy spectrum is analyzed and established to modify the influence caused by the neutron spectrum, and the Point Scattered Function (PScF) simulated by the Monte-Carlo program MCNPX is used to evaluate scattering effects from the object and improve image quality. Good analysis results prove the sound effects of the above two corrections.

Auf Proteinjagd in der T-Zelle: Einzelmolekül-Mikroskopie

NASA Astrophysics Data System (ADS)

Brameshuber, Mario; Mörtelmaier, Manuel

2004-07-01

Einzelne Moleküle in lebenden Zellen mit Fluoreszenzmikroskopen zu beobachten, ist derzeit noch eine technische Herausforderung. Sie lohnt sich aber: So können erstmals die molekularen Bausteine des Lebens, etwa Proteine, bei ihren Aktivitäten direkt verfolgt werden. Das erlaubt völlig neue Einblicke in die Funktionsmechanismen biologischer Zellen. Ein interessantes Forschungsobjekt sind die T-Zellen, die das Immunsystem steuern. Die Beobachtung einzelner Proteine kann das Rätsel lösen helfen, wie T-Zellen gefährliche von ungefährlichen Erregern unterscheiden können. Damit Einzelmolekül-Mikroskope routinemäßig in Biolabors eingesetzt werden können, müssen sie noch robuster, billiger und einfacher handhabbar werden.

Re-evaluation of the correction factors for the GROVEX

NASA Astrophysics Data System (ADS)

Ketelhut, Steffen; Meier, Markus

2018-04-01

The GROVEX (GROssVolumige EXtrapolationskammer, large-volume extrapolation chamber) is the primary standard for the dosimetry of low-dose-rate interstitial brachytherapy at the Physikalisch-Technische Bundesanstalt (PTB). In the course of setup modifications and re-measuring of several dimensions, the correction factors have been re-evaluated in this work. The correction factors for scatter and attenuation have been recalculated using the Monte Carlo software package EGSnrc, and a new expression has been found for the divergence correction. The obtained results decrease the measured reference air kerma rate by approximately 0.9% for the representative example of a seed of type Bebig I25.S16C. This lies within the expanded uncertainty (k  =  2).

Sicherung mathematischer Grundkompetenzen am Beispiel des österreichischen Zentralabiturs

NASA Astrophysics Data System (ADS)

Peschek, Werner

Der österreichische Nationalrat (Parlament) hat im Sommer 2009 eine Neugestaltung der Reifeprüfung (Abitur) beschlossen; die wesentlichste Änderung besteht darin, dass die Aufgabenstellungen der für alle Schülerinnen und Schüler verbindlichen schriftlichen Reifeprüfung (sRP) in den Fächern Deutsch, Mathematik und einer lebenden Fremdsprache zentral und nicht wie bisher durch die jeweilige Klassenlehrerin bzw. den Klassenlehrer erfolgen. Für die Allgemeinbildenden Höheren Schulen ("Gymnasien") soll diese neue Regelung ab dem Schuljahr 2013/14 gelten, für die Berufsbildenden Höheren Schulen (u. a. höhere technische oder kaufmännische Schulen mit Abitur) ab dem Schuljahr 2014/15.

Digitalisierung des Bösen: Energiewirtschaft als Cyberopfer

NASA Astrophysics Data System (ADS)

Bartsch, Michael; Frey, Stefanie

Die Energieversorgung ist eine kritische Infrastruktur, da alle anderen Sektoren von der Stromversorgung abhängig sind und eine Störung katastrophale Auswirkungen mit unvorhersehbaren Kaskadeneffekten mit sich bringen würde. Das oberste Ziel der Betreiber ist daher sicherzustellen, dass Maßnahmen für eine störungsfreie Stromversorgung ergriffen werden. Cyberangriffe stellen ein hohes Risiko für die Energieversorgung dar. Dabei kann die Energiewirtschaft von Massenphänomenen wie Cybercrime betroffen sein, aber auch Gegenstand von technisch komplexer Cybersabotage werden, wie bei dem Angriff Ende 2015 auf einen ukrainischen Energieversorger. Die Stromversorgung fiel für mehrere Stunden aus und hatte weitreichende Auswirkungen für die Bevölkerung und Unternehmen.

Reduction of the uncertainty of the PTB vacuum pressure scale by a new large area non-rotating piston gauge

NASA Astrophysics Data System (ADS)

Bock, Th; Ahrendt, H.; Jousten, K.

2009-10-01

This paper describes the metrological characterization of a new large area piston gauge (FRS5, Furness Rosenberg Standard) installed at the vacuum metrology laboratory of the Physikalisch-Technische Bundesanstalt (PTB). The operational procedure and the uncertainty budget for pressures between 30 Pa and 11 kPa are given. Comparisons between the FRS5 and a mercury manometer, a rotary piston gauge and a force-balanced piston gauge are described. We show that the reproducibility of the calibration values of capacitance diaphragm gauges is enhanced by a factor of 6 compared with a static expansion primary standard (SE2). Improvements of the SE2 performance by reducing the number of expansions and smaller uncertainties of expansion ratios are discussed.

Experimental investigation of a newly designed supersonic wind tunnel

NASA Astrophysics Data System (ADS)

Wu, J.; Radespiel, R.

2015-06-01

The flow characteristics of the tandem nozzle supersonic wind tunnel at the Institute of Fluid Mechanics, Technische Universität Braunschweig, a are investigated. Conventional measurement techniques were utilized. The flow development is examined by pressure sensors installed at various streamwise positions. The temperature is measured in the storage tube and the settling chamber. The influence of flow treatment in the settling chamber on the flow quality is also studied. The flow quality of test section is evaluated by a 6-probe Pitot rake. The pressure fluctuations in the test section are studied by a sharp cone model. Eventually, good agreement between the measurements and numerical simulation of the tunnel design is achieved.

Professionelles Learning Service Management an Hochschulen

NASA Astrophysics Data System (ADS)

Baume, Matthias; Rathmayer, Sabine; Gergintchev, Ivan; Schulze, Elvira

Aufbauend auf den Großteils bereits geschaffenen eLearning Infrastrukturen für eine moderne Organisation stehen nahezu alle Hochschulen vor der Aufgabe, geeignete Lern- und Wissensmanagementkonzepte in Hinblick auf die Dienstgüte und den Anwenderbezug zu realisieren. Ein möglicher Lösungsansatz ist dabei die Entwicklung und Umsetzung eines Rahmenkonzeptes zur Verbesserung und Weiterentwicklung der Lehr-/Lernprozesse für Dozenten und Studenten am Beispiel bereits vorhandener und etablierter Service-Management-Konzepte. Übertragen auf die universitäre Organisation und Lehre, wäre ein derartiges Rahmenwerk zur Planung, Erbringung und Unterstützung von Lehr-/Lerndienstleistungen mit Einbezug der wichtigsten Lehr-/Lernprozesse ein dringend benötigter und fundamentaler Schritt hin zu einer schrittweisen Professionalisierung und Verbesserung der Hochschullehre. Der Beitrag erschließt eine Konzeptskizze für professionelles Learning Service Management an Hochschulen und gibt einen Ausblick auf die mögliche Vorgehensweise bei dessen Implementierung und Evaluierung.

Supply Chain Management (SCM) mit Kanban

NASA Astrophysics Data System (ADS)

Beer, Anja; Dickmann, Eva; Dickmann, Philipp; Gerth, Wolf-Michael; Graßy, Mario; Herron, Colin; Schmidt, Peter; Seidl, Florian; Wittmann, Claus-Eduard

Nach Schätzungen von Mercer Management Consulting und dem Fraunhofer Institut wird der Wertschöpfungsanteil in der Automobilindustrie von durchschnittlich 35 % im Jahr 2002 auf 23 % im Jahr 2015 sinken [Merc 04]. Der Trend, die Produktionstiefe oder allgemeiner, die Wertschöpfungstiefe, zu reduzieren, hat zur Folge, dass die Kaufteile den größeren Teil der Wertschöpfung einnehmen. Die Optimierungspotentiale und der Einfluss auf die Kosten wandern immer mehr zu den Lieferanten, vor allem bei größeren Unternehmen oder Konzernen. Lieferanten-Philosophien, die auf oberflächlichen Verbindungen zu Lieferanten aufbauen, um immer optimal und schnell den günstigsten Teilepreis zu erhalten, haben sich in vielen Sparten oder Produktbereichen, z. B. im Maschinenbau, im besten Fall als kurzfristig erfolgreich erwiesen. Kooperative und nachhaltige Strategien sind der erfolgversprechendere Weg, zumindest mittelbis langfristig. In der Realität wird sehr wenig in Supply Chain-Konzepte investiert und die Umsetzungen sind daher vielmals oberflächlich.

Xyloglucan Deficiency Disrupts Microtubule Stability and Cellulose Biosynthesis in Arabidopsis, Altering Cell Growth and Morphogenesis1[OPEN

PubMed Central

Xiao, Chaowen; Zhang, Tian; Zheng, Yunzhen

2016-01-01

Xyloglucan constitutes most of the hemicellulose in eudicot primary cell walls and functions in cell wall structure and mechanics. Although Arabidopsis (Arabidopsis thaliana) xxt1 xxt2 mutants lacking detectable xyloglucan are viable, they display growth defects that are suggestive of alterations in wall integrity. To probe the mechanisms underlying these defects, we analyzed cellulose arrangement, microtubule patterning and dynamics, microtubule- and wall-integrity-related gene expression, and cellulose biosynthesis in xxt1 xxt2 plants. We found that cellulose is highly aligned in xxt1 xxt2 cell walls, that its three-dimensional distribution is altered, and that microtubule patterning and stability are aberrant in etiolated xxt1 xxt2 hypocotyls. We also found that the expression levels of microtubule-associated genes, such as MAP70-5 and CLASP, and receptor genes, such as HERK1 and WAK1, were changed in xxt1 xxt2 plants and that cellulose synthase motility is reduced in xxt1 xxt2 cells, corresponding with a reduction in cellulose content. Our results indicate that loss of xyloglucan affects both the stability of the microtubule cytoskeleton and the production and patterning of cellulose in primary cell walls. These findings establish, to our knowledge, new links between wall integrity, cytoskeletal dynamics, and wall synthesis in the regulation of plant morphogenesis. PMID:26527657

Xyloglucan Deficiency Disrupts Microtubule Stability and Cellulose Biosynthesis in Arabidopsis, Altering Cell Growth and Morphogenesis

DOE PAGES

Xiao, Chaowen; Zhang, Tian; Zheng, Yunzhen; ...

2015-11-02

Here, xyloglucan constitutes most of the hemicellulose in eudicot primary cell walls and functions in cell wall structure and mechanics. Although Arabidopsis ( Arabidopsis thaliana) xxt1 xxt2 mutants lacking detectable xyloglucan are viable, they display growth defects that are suggestive of alterations in wall integrity. To probe the mechanisms underlying these defects, we analyzed cellulose arrangement, microtubule patterning and dynamics, microtubule- and wall-integrity-related gene expression, and cellulose biosynthesis in xxt1 xxt2 plants. We found that cellulose is highly aligned in xxt1 xxt2 cell walls, that its three-dimensional distribution is altered, and that microtubule patterning and stability are aberrant in etiolatedmore » xxt1 xxt2 hypocotyls. We also found that the expression levels of microtubule-associated genes, such as MAP70-5 and CLASP, and receptor genes, such as HERK1 and WAK1, were changed in xxt1 xxt2 plants and that cellulose synthase motility is reduced in xxt1 xxt2 cells, corresponding with a reduction in cellulose content. Our results indicate that loss of xyloglucan affects both the stability of the microtubule cytoskeleton and the production and patterning of cellulose in primary cell walls. These findings establish, to our knowledge, new links between wall integrity, cytoskeletal dynamics, and wall synthesis in the regulation of plant morphogenesis.« less

Xyloglucan Deficiency Disrupts Microtubule Stability and Cellulose Biosynthesis in Arabidopsis, Altering Cell Growth and Morphogenesis.

PubMed

Xiao, Chaowen; Zhang, Tian; Zheng, Yunzhen; Cosgrove, Daniel J; Anderson, Charles T

2016-01-01

Xyloglucan constitutes most of the hemicellulose in eudicot primary cell walls and functions in cell wall structure and mechanics. Although Arabidopsis (Arabidopsis thaliana) xxt1 xxt2 mutants lacking detectable xyloglucan are viable, they display growth defects that are suggestive of alterations in wall integrity. To probe the mechanisms underlying these defects, we analyzed cellulose arrangement, microtubule patterning and dynamics, microtubule- and wall-integrity-related gene expression, and cellulose biosynthesis in xxt1 xxt2 plants. We found that cellulose is highly aligned in xxt1 xxt2 cell walls, that its three-dimensional distribution is altered, and that microtubule patterning and stability are aberrant in etiolated xxt1 xxt2 hypocotyls. We also found that the expression levels of microtubule-associated genes, such as MAP70-5 and CLASP, and receptor genes, such as HERK1 and WAK1, were changed in xxt1 xxt2 plants and that cellulose synthase motility is reduced in xxt1 xxt2 cells, corresponding with a reduction in cellulose content. Our results indicate that loss of xyloglucan affects both the stability of the microtubule cytoskeleton and the production and patterning of cellulose in primary cell walls. These findings establish, to our knowledge, new links between wall integrity, cytoskeletal dynamics, and wall synthesis in the regulation of plant morphogenesis. © 2016 American Society of Plant Biologists. All Rights Reserved.

A fault is born: The Landers-Mojave earthquake line

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nur, A.; Ron, H.

1993-04-01

The epicenter and the southern portion of the 1992 Landers earthquake fell on an approximately N-S earthquake line, defined by both epicentral locations and by the rupture directions of four previous M>5 earthquakes in the Mojave: The 1947 Manix; 1975 Galway Lake; 1979 Homestead Valley: and 1992 Joshua Tree events. Another M 5.2 earthquake epicenter in 1965 fell on this line where it intersects the Calico fault. In contrast, the northern part of the Landers rupture followed the NW-SE trending Camp Rock and parallel faults, exhibiting an apparently unusual rupture kink. The block tectonic model (Ron et al., 1984) combiningmore » fault kinematic and mechanics, explains both the alignment of the events, and their ruptures (Nur et al., 1986, 1989), as well as the Landers kink (Nur et al., 1992). Accordingly, the now NW oriented faults have rotated into their present direction away from the direction of maximum shortening, close to becoming locked, whereas a new fault set, optimally oriented relative to the direction of shortening, is developing to accommodate current crustal deformation. The Mojave-Landers line may thus be a new fault in formation. During the transition of faulting from the old, well developed and wak but poorly oriented faults to the strong, but favorably oriented new ones, both can slip simultaneously, giving rise to kinks such as Landers.« less

Traceable Measurements of Seebeck Coefficients of Thermoelectric Materials by Using Noble Metal Thermocouples

NASA Astrophysics Data System (ADS)

Haupt, Sebastian; Edler, Frank

2018-06-01

The characterization of thermoelectric materials as reference materials for Seebeck coefficients at the Physikalisch-Technische Bundesanstalt (PTB) is based on the usage of gold/platinum differential thermocouples. In the case of thermoelectric materials containing silicon, the gold/platinum thermocouples are insufficient due to reactions with the silicon when the samples are at higher temperatures. To overcome this limitation and to expand the temperature range for the certification process, platinum/palladium thermocouples were incorporated in the measurement setup. This paper discusses the influence of the different differential thermocouples used for the measurement of the Seebeck coefficients. Results of a comparative investigation of Seebeck coefficient measurements of a metallic and two semiconducting reference materials in the temperature range from 300 K to 870 K are presented.

Theoretical and experimental determination of L -shell decay rates, line widths, and fluorescence yields in Ge

NASA Astrophysics Data System (ADS)

Guerra, M.; Sampaio, J. M.; Madeira, T. I.; Parente, F.; Indelicato, P.; Marques, J. P.; Santos, J. P.; Hoszowska, J.; Dousse, J.-Cl.; Loperetti, L.; Zeeshan, F.; Müller, M.; Unterumsberger, R.; Beckhoff, B.

2015-08-01

Fluorescence yields (FYs) for the Ge L shell were determined by a theoretical and two experimental groups within the framework of the International Initiative on X-Ray Fundamental Parameters Collaboration. Calculations were performed using the Dirac-Fock method, including relativistic and QED corrections. The experimental value of the L3FY ωL 3 was determined at the Physikalisch-Technische Bundesanstalt undulator beamline of the synchrotron radiation facility BESSY II in Berlin, Germany, and the L α1 ,2 and L β1 line widths were measured at the Swiss Light Source, Paul Scherrer Institute, Switzerland, using monochromatized synchrotron radiation and a von Hamos x-ray crystal spectrometer. The measured fluorescence yields and line widths are compared to the corresponding calculated values.

Werkstoffe

NASA Astrophysics Data System (ADS)

Hornbogen, Erhard; Eggeler, Gunther; Werner, Ewald

Lernziel: Dieses Kapitel vermittelt einen ersten Eindruck von Werkstoffen, die bestimmte technische Eigenschaften besitzen müssen, dabei einfach herstellbar sein sollen und die Forderung der Wirtschaftlichkeit erfüllen müssen. Wir diskutieren Werkstoffe in einfachen, allgemeinen und speziellen Zusammenhängen und lernen das Wissensgebiet Werkstoffkunde kennen, das die Werkstoffwissenschaft und die Werkstofftechnik umfasst. Wir verschaffen uns einen ersten Eindruck vom mikroskopischen Aufbau der vier Werkstoffgruppen Metalle, Gläser/Keramiken, Kunststoffe und Verbundwerkstoffe. Wir lernen einige wichtige Werkstoffeigenschaften kennen. Es geht dann um zuverl ässige Datenüber Eigenschaften von Werkstoffen und in diesem Zusammenhang wird die Prüfung, die Normung und die Bezeichnung von Werkstoffen betrachtet. Schließlich befassen wir uns kurz mit der zeitlichen Entwicklung von Werkstoffen und führen den Begriff der Nachhaltigkeit ein.

SMARD-REXUS-18: Development and Verification of an SMA Based CubeSat Solar Panel Deployment Mechanism

NASA Astrophysics Data System (ADS)

Grulich, M.; Koop, A.; Ludewig, P.; Gutsmiedl, J.; Kugele, J.; Ruck, T.; Mayer, I.; Schmid, A.; Dietmann, K.

2015-09-01

SMARD (Shape Memory Alloy Reusable Deployment Mechanism) is an experiment for a sounding rocket developed by students at Technische Universität MUnchen (TUM). It was launched in March 2015 on REXUS 18 (Rocket Experiments for University Students). The goal of SMARD was to develop a solar panel holddown and release mechanism (HDRM) for a CubeSat using shape memory alloys (SMA) for repeatable actuation and the ability to be quickly resettable. This paper describes the technical approach as well as the technological development and design of the experiment platform, which is capable of proving the functionality of the deployment mechanism. Furthermore, the realization of the experiment as well as the results of the flight campaign are presented. Finally, the future applications of the developed HDRM and its possible further developments are discussed.

Determining orbital particle parameters of impacts into germanium using morphology analysis and calibration data from hypervelocity impact experiments in the laboratory

NASA Technical Reports Server (NTRS)

Paul, Klaus G.

1995-01-01

This paper describes the work that is done at the Lehrstuhl fur Raumfahrttechnik (lrt) at the Technische Universitat Munchen to examine particle impacts into germanium surfaces which were flown on board the LDEF satellite. Besides the description of the processing of the samples, a brief overview of the particle launchers at our institute is given together with descriptions of impact morphology of high- and hypervelocity particles into germanium. Since germanium is a brittle, almost glass-like material, the impact morphology may also be interesting for anyone dealing with materials such as optics and solar cells. The main focus of our investigations is to learn about the impacting particle's properties, for example mass, velocity and direction. This is done by examining the morphology, various geometry parameters, crater obliqueness and crater volume.

Status and Plans for the Vienna VLBI and Satellite Software (VieVS 3.0)

NASA Astrophysics Data System (ADS)

Gruber, Jakob; Böhm, Johannes; Böhm, Sigrid; Girdiuk, Anastasiia; Hellerschmied, Andreas; Hofmeister, Armin; Krásná, Hana; Kwak, Younghee; Landskron, Daniel; Madzak, Matthias; Mayer, David; McCallum, Jamie; Plank, Lucia; Schartner, Matthias; Shabala, Stas; Teke, Kamil; Sun, Jing

2017-04-01

The Vienna VLBI and Satellite Software (VieVS) is a geodetic analysis software developed and maintained at Technische Universität Wien (TU Wien) with contributions from groups all over the world. It is used for both academic purposes in university courses as well as for providing Very Long Baseline Interferometry (VLBI) analysis results to the geodetic community. Written in a modular structure in Matlab, VieVS offers easy access to the source code and the possibility to adapt the programs for particular purposes. The new version 3.0, released in early 2017, includes several new features, e.g., improved scheduling capabilities for observing quasars and satellites. This poster gives an overview of all VLBI-related activities in Vienna and provides an outlook to future plans concerning the Vienna VLBI and Satellite Software (VieVS).

Novel reference radiation fields for pulsed photon radiation installed at PTB.

PubMed

Klammer, J; Roth, J; Hupe, O

2012-09-01

Currently, ∼70 % of the occupationally exposed persons in Germany are working in pulsed radiation fields, mainly in the medical sector. It has been known for a few years that active electronic dosemeters exhibit considerable deficits or can even fail completely in pulsed fields. Type test requirements for dosemeters exist only for continuous radiation. Owing to the need of a reference field for pulsed photon radiation and accordingly to the upcoming type test requirements for dosemeters in pulsed radiation, the Physikalisch-Technische Bundesanstalt has developed a novel X-ray reference field for pulsed photon radiation in cooperation with a manufacturer. This reference field, geared to the main applications in the field of medicine, has been well characterised and is now available for research and type testing of dosemeters in pulsed photon radiation.

Alpha-induced reactions on selenium between 11 and 15 MeV

NASA Astrophysics Data System (ADS)

Fiebiger, Stefan; Slavkovská, Zuzana; Giesen, Ulrich; Göbel, Kathrin; Heftrich, Tanja; Heiske, Annett; Reifarth, René; Schmidt, Stefan; Sonnabend, Kerstin; Thomas, Benedikt; Weigand, Mario

2017-07-01

The production of 77,79,85,85m Kr and 77Br via the reaction Se(α ,x) was investigated between {E}α =11 and 15 MeV using the activation technique. The irradiation of natural selenium targets on aluminum backings was conducted at the Physikalisch-Technische Bundesanstalt (PTB) in Braunschweig, Germany. The spectroscopic analysis of the reaction products was performed using a high-purity germanium detector located at PTB and a low energy photon spectrometer detector at the Goethe University Frankfurt, Germany. Thick-target yields were determined. The corresponding energy-dependent production cross sections of 77,79,85,85m Kr and 77Br were calculated from the thick-target yields. Good agreement between experimental data and theoretical predictions using the TALYS-1.6 code was found.

Internet discussion forums as part of a student-centred teaching concept of pharmacology.

PubMed

Sucha, Michael; Engelhardt, Stefan; Sarikas, Antonio

2013-01-01

The world wide web opens up new opportunities to interconnect electronic and classroom teaching and to promote active student participation. In this project article we describe the use of internet discussion forums as part of a student-centred teaching concept of pharmacology and discuss its advantages and disadvantages based on evaluation data and current literature. Final year medical students at the Technische Universität München (Munich, Germany) with the elective pharmacology moderated an internet forum that allowed all students to discuss pharmacology-related questions. Evaluation results of forum participants and elective students demonstrated a learning benefit of internet forums in pharmacology teaching. Internet discussion forums offer an easy-to-implement and effective way to actively engage students and increase the learning benefit of electronic and classroom teaching in pharmacology.

Ginger: Measuring Gravitomagnetic Effects by Means of Light

NASA Astrophysics Data System (ADS)

Tartaglia, Angelo

2015-01-01

GINGER is a proposal for a new experiment aimed to the detection of the gravito-magnetic Lense-Thirring effect at the surface of the Earth. A three-dimensional set of ring lasers will be mounted on a rigid "monument". In a ring laser a light beam traveling counterclockwise is superposed to another beam traveling in the opposite sense. The anisotropy in the propagation leads to standing waves with slightly different frequencies in the two directions; the resulting beat frequency is proportional to the absolute rotation rate in space, including the gravito-magnetic drag. The experiment is planned to be built in the Gran Sasso National Laboratories in Italy and is based on an international collaboration among four Italian groups, the Technische Universität München and the University of Canterbury in Christchurch (NZ).

List of Participants

NASA Astrophysics Data System (ADS)

2008-11-01

Mohab Abou ZeidInstitut des Hautes Études Scientifiques, Bures-sur-Yvette Ido AdamMax-Planck-Institut für Gravitationsphysik (AEI), Potsdam Henrik AdorfLeibniz Universität Hannover Mohammad Ali-AkbariIPM, Tehran Antonio Amariti Università di Milano-Bicocca Nicola Ambrosetti Université de Neuchâtel Martin Ammon Max-Planck-Institut für Physik, München Christopher AndreyÉcole Polytechnique Fédérale de Lausanne (EPFL) Laura AndrianopoliPolitecnico di Torino David AndriotLPTHE, Université UPMC Paris VI Carlo Angelantonj Università di Torino Pantelis ApostolopoulosUniversitat de les Illes Balears, Palma Gleb ArutyunovInstitute for Theoretical Physics, Utrecht University Davide AstolfiUniversità di Perugia Spyros AvramisUniversité de Neuchâtel Mirela BabalicChalmers University, Göteborg Foday BahDigicom Ioannis Bakas University of Patras Igor BandosUniversidad de Valencia Jose L F BarbonIFTE UAM/CSIC Madrid Till BargheerMax-Planck-Institut für Gravitationsphysik (AEI), Potsdam Marco Baumgartl Eidgenössische Technische Hochschule (ETH), Zürich James BedfordImperial College London Raphael BenichouLaboratoire de Physique Théorique, École Normale Supérieure, Paris Francesco Benini SISSA, Trieste Eric Bergshoeff Centre for Theoretical Physics, University of Groningen Alice BernamontiVrije Universiteit, Brussel Julia BernardLaboratoire de Physique Théorique, École Normale Supérieure, Paris Adel Bilal Laboratoire de Physique Théorique, École Normale Supérieure, Paris Marco Billo' Università di Torino Matthias Blau Université de Neuchâtel Guillaume BossardAlbert-Einstein-Institut, Golm Leonardo BriziÉcole Polytechnique Fédérale de Lausanne (EPFL) Johannes BroedelLeibniz Universität Hannover (AEI) Tom BrownQueen Mary, University of London Ilka BrunnerEidgenössische Technische Hochschule (ETH), Zürich Erling BrynjolfssonUniversity of Iceland Dmitri BykovSteklov Institute, Moscow and Trinity College, Dublin Joan CampsUniversitat de Barcelona

Karlsruhe Database for Radioactive Wastes (KADABRA) - Accounting and Management System for Radioactive Waste Treatment - 12275

DOE Office of Scientific and Technical Information (OSTI.GOV)

Himmerkus, Felix; Rittmeyer, Cornelia

2012-07-01

The data management system KADABRA was designed according to the purposes of the Cen-tral Decontamination Department (HDB) of the Wiederaufarbeitungsanlage Karlsruhe Rueckbau- und Entsorgungs-GmbH (WAK GmbH), which is specialized in the treatment and conditioning of radioactive waste. The layout considers the major treatment processes of the HDB as well as regulatory and legal requirements. KADABRA is designed as an SAG ADABAS application on IBM system Z mainframe. The main function of the system is the data management of all processes related to treatment, transfer and storage of radioactive material within HDB. KADABRA records the relevant data concerning radioactive residues, interimmore » products and waste products as well as the production parameters relevant for final disposal. Analytical data from the laboratory and non destructive assay systems, that describe the chemical and radiological properties of residues, production batches, interim products as well as final waste products, can be linked to the respective dataset for documentation and declaration. The system enables the operator to trace the radioactive material through processing and storage. Information on the actual sta-tus of the material as well as radiological data and storage position can be gained immediately on request. A variety of programs accessed to the database allow the generation of individual reports on periodic or special request. KADABRA offers a high security standard and is constantly adapted to the recent requirements of the organization. (authors)« less

Lernersprache: Ein theoretisches Konzept und seine praktische Relevanz (Learners' Language: A Theoretical Concept and Its Practical Relevance)

ERIC Educational Resources Information Center

Lauerbach, Gerda

1977-01-01

It is hoped that from learners' faulty use of the foreign language, clues may be found for foreign language teaching. Some "factors" are examined: negative transfer, learning and communication strategies, over-generalization. Also discussed are ways of dealing with various errors. (Text is in German.) (IFS/WGA)

Report of Research at Technische Universitaet Darmstadt on Ultrahard Materials in the B-C-N-Si System

DTIC Science & Technology

2015-06-01

structure at the micro- and nanoscale. In other words, development of nanocomposites, multilayers, and superlattices via appropriate design and control of...C-B and C-N bonds as C-C and B-N bonds. Later, the same research group , based on first-principles total-energy, and dynamic phonon calculations...Vickers hardness values.7 Another research group employed an ab initio evolutionary algorithm42 to resolve the crystal structure of the observed

Clearance flow-generated transverse forces at the rotors of thermal turbomachines. Ph.D. Thesis - Technische Univ., 1975

NASA Technical Reports Server (NTRS)

Urlichs, K.

1983-01-01

Self-excited rotor whirl represents a serious hazard in the operation of turbomachines. The reported investigation has, therefore, the objective to measure the lateral forces acting on the rotor and to determine the characteristic pressure distribution in the rotor clearance area. A description is presented of an approach for calculating the leakage flow in the case of an eccentric rotor position on the basis of empirical loss coefficients. The results are reported of an experimental investigation with a turbine stage, taking into account a variation of the clearance characteristics. The pressure data measured are consistent with the theoretical considerations.

KEY COMPARISON: BIPM comparison BIPM.RI(II)-K1.Cu-64 of the activity measurements of the radionuclide 64Cu

NASA Astrophysics Data System (ADS)

Michotte, C.; Courte, S.; Ratel, G.; Kossert, K.; Nähle, O. J.

2009-01-01

In 2009, the Physikalisch-Technische Bundesanstalt (PTB), Germany, submitted a sample of known activity of 64Cu to the International Reference System (SIR) for activity comparison at the Bureau International des Poids et Mesures (BIPM). The value of the activity submitted was about 9.3 MBq. The result of this new comparison has been approved for publication by Section II of the Consultative Committee for Ionizing Radiation (CCRI(II)), comparison identifier BIPM.RI(II)-K1.Cu-64. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCRI Section II, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).

Reinraumtechnik für die Medizintechnik

NASA Astrophysics Data System (ADS)

Petek, Max; Jungbluth, Martin; Krampe, Erhard

Die Reinraumtechnik ist heute ein unverzichtbarer Bestandteil bei der Fertigung von Produkten der Life Sciences, den Bereichen Pharma, Lebensmittel, Kosmetik und Medizintechnik. In Anbetracht der langen Historie der Medizintechnik ist sie jedoch eine sehr junge Disziplin. Die Bedeutung von Keimen und die richtige Einschätzung ihrer Größe wurden zwar sehr früh bereits durch Paracelsus erkannt, jedoch wurden daraus noch keine speziellen oder kontinuierlich umgesetzten Hygienevorschriften abgeleitet. Die erste bekannte technische Umsetzung von Hygieneempfehlungen geht auf den Franzosen François Nicolas Appert zurück, der eine aseptische Abfüllmethode für Lebensmittel entwickelte und diese 1810 veröffentlichte [1]. Die erste dokumentierte medizinische Umsetzung stellten Hygienevorschriften für Ärzte dar, die Ignaz Philipp Semmelweis nach 1847 in der Wiener Klinik für Geburtshilfe einführte [2].

Measuring and interpreting X-ray fluorescence from planetary surfaces.

PubMed

Owens, Alan; Beckhoff, Burkhard; Fraser, George; Kolbe, Michael; Krumrey, Michael; Mantero, Alfonso; Mantler, Michael; Peacock, Anthony; Pia, Maria-Grazia; Pullan, Derek; Schneider, Uwe G; Ulm, Gerhard

2008-11-15

As part of a comprehensive study of X-ray emission from planetary surfaces and in particular the planet Mercury, we have measured fluorescent radiation from a number of planetary analog rock samples using monochromatized synchrotron radiation provided by the BESSY II electron storage ring. The experiments were carried out using a purpose built X-ray fluorescence (XRF) spectrometer chamber developed by the Physikalisch-Technische Bundesanstalt, Germany's national metrology institute. The XRF instrumentation is absolutely calibrated and allows for reference-free quantitation of rock sample composition, taking into account secondary photon- and electron-induced enhancement effects. The fluorescence data, in turn, have been used to validate a planetary fluorescence simulation tool based on the GEANT4 transport code. This simulation can be used as a mission analysis tool to predict the time-dependent orbital XRF spectral distributions from planetary surfaces throughout the mapping phase.

Final Report on the Key Comparison CCM.P-K4.2012 in Absolute Pressure from 1 Pa to 10 kPa

PubMed Central

Ricker, Jacob; Hendricks, Jay; Bock, Thomas; Dominik, Pražák; Kobata, Tokihiko; Torres, Jorge; Sadkovskaya, Irina

2017-01-01

The report summarizes the Consultative Committee for Mass (CCM) key comparison CCM.P-K4.2012 for absolute pressure spanning the range of 1 Pa to 10 000 Pa. The comparison was carried out at six National Metrology Institutes (NMIs), including National Institute of Standards and Technology (NIST), Physikalisch-Technische Bundesanstalt (PTB), Czech Metrology Institute (CMI), National Metrology Institute of Japan (NMIJ), Centro Nacional de Metrología (CENAM), and DI Mendeleyev Institute for Metrology (VNIIM). The comparison was made via a calibrated transfer standard measured at each of the NMIs facilities using their laboratory standard during the period May 2012 to September 2013. The transfer package constructed for this comparison preformed as designed and provided a stable artifact to compare laboratory standards. Overall the participants were found to be statistically equivalent to the key comparison reference value. PMID:28216793

PREFACE: International Conference on Topics in Astroparticle and Underground Physics (TAUP 2011)

NASA Astrophysics Data System (ADS)

Oberauer, Lothar; Raffelt, Georg; Wagner, Robert

2012-07-01

'Tor Vergata' K DanzmannMax Planck Institute for Gravitational Physics S DodelsonFermilab G DomogatskyINR Moscow E FioriniUniversità di Milano Bicocca & INFN K FreeseUniversity of Michigan M FukugitaICRR Tokyo T GaisserUniversity of Delaware G GerbierCEA Saclay F HalzenUniversity of Wisconsin W HaxtonLNBL & UC Berkeley J HoughGlasgow University E KomatsuUniversity of Texas E KatsavounidisMassachusetts Institute of Technology M LindnerMax Planck Institute for Nuclear Physics K LeskoLBNL & UC Berkeley A McDonaldQueens University & SNO Laboratory H MurayamaIPMU Tokyo & UC Berkeley A OlintoUniversity of Chicago L ResvanisUniversity of Athens A RubbiaETH Zurich S SarkarUniversity of Oxford A SmirnovICTP Trieste N SmithSNO Laboratory C SpieringDESY Zeuthen N SpoonerUniversity of Sheffield Y SuzukiICRR Tokyo M TeshimaMax Planck Institute for Physics J W F ValleIFIC & University of Valencia L VotanoLNGS E WaxmanWeizmann Institute J WilkersonUniversity of North Carolina TAUP Steering Committee F T AvignoneUniversity of South Carolina B C BarishCaltech E BellottiUniversity of Milan Bicoccia & INFN J BernabeuUniversity of Valencia A BottinoUniversity of Turin & INFN (chair) N FornengoUniversity of Turin & INFN T KajitaICRR Tokyo C W KimJohns Hopkins University & KIAS V MatveevINR Moscow G RaffeltMax Planck Institute for Physics D SinclairUniversity of Carleton M SpiroCEA Saclay Parallel Session Conveners Dark Matter - Candidates and Searches J-C LanfranchiTechnische Universität München T Marrodán UndagoitiaUniversity of Zurich T BringmannUniversität Hamburg Cosmology J WellerLudwig-Maximilians-Universität München S HannestadUniversity of Aarhus Double Beta Decay, Neutrino Mass M HirschIFIC/CSIC - University of Valencia A GiulianiCNRS Orsay Neutrino Oscillations T LachenmaierUniversität Tübingen F SuekaneTohoku University Low-Energy Neutrinos (Geo, Solar, Supernova) A DigheTIFR Mumbai M ChenQueen's University M WurmUniversität Hamburg Gravitational Waves E Coccia

ESPACE - a geodetic Master's program for the education of Satellite Application Engineers

NASA Astrophysics Data System (ADS)

Hedman, K.; Kirschner, S.; Seitz, F.

2012-04-01

In the last decades there has been a rapid development of new geodetic and other Earth observation satellites. Applications of these satellites such as car navigation systems, weather predictions, and, digital maps (such as Google Earth or Google Maps) play a more and more important role in our daily life. For geosciences, satellite applications such as remote sensing and precise positioning/navigation have turned out to be extremely useful and are meanwhile indispensable. Today, researchers within geodesy, climatology, oceanography, meteorology as well as within Earth system science are all dependent on up-to-date satellite data. Design, development and handling of these missions require experts with knowledge not only in space engineering, but also in the specific applications. That gives rise to a new kind of engineers - satellite application engineers. The study program for these engineers combines parts of different classical disciplines such as geodesy, aerospace engineering or electronic engineering. The satellite application engineering program Earth Oriented Space Science and Technology (ESPACE) was founded in 2005 at the Technische Universität München, mainly from institutions involved in geodesy and aerospace engineering. It is an international, interdisciplinary Master's program, and is open to students with a BSc in both Science (e.g. Geodesy, Mathematics, Informatics, Geophysics) and Engineering (e.g. Aerospace, Electronical and Mechanical Engineering). The program is completely conducted in English. ESPACE benefits from and utilizes its location in Munich with its unique concentration of expertise related to space science and technology. Teaching staff from 3 universities (Technische Universität München, Ludwig-Maximilian University, University of the Federal Armed Forces), research institutions (such as the German Aerospace Center, DLR and the German Geodetic Research Institute, DGFI) and space industry (such as EADS or Kayser-Threde) are

Motivating first-year university students by interdisciplinary study projects

NASA Astrophysics Data System (ADS)

Koch, Franziska D.; Dirsch-Weigand, Andrea; Awolin, Malte; Pinkelman, Rebecca J.; Hampe, Manfred J.

2017-01-01

In order to increase student commitment from the beginning of students' university careers, the Technische Universität Darmstadt has introduced interdisciplinary study projects involving first-year students from the engineering, natural, social and history, economics and/or human sciences departments. The didactic concept includes sophisticated task design, individual responsibility and a differentiated support system. Using a self-determination theory framework, this study examined the effects of the projects based on survey findings from two projects with more than 1000 students. The results showed that the projects were successful in fulfilling students' basic psychological needs and in promoting students' academic engagement. Basic psychological needs were found to be significant predictors of academic engagement. These findings suggest that interdisciplinary study projects can potentially contribute to improving higher education as they fulfil students' basic psychological needs for competence, relatedness and autonomy and enhance students' academic engagement.

Cross sections for ionization of tetrahydrofuran by protons at energies between 300 and 3000 keV

NASA Astrophysics Data System (ADS)

Wang, Mingjie; Rudek, Benedikt; Bennett, Daniel; de Vera, Pablo; Bug, Marion; Buhr, Ticia; Baek, Woon Yong; Hilgers, Gerhard; Rabus, Hans

2016-05-01

Double-differential cross sections for ionization of tetrahydrofuran by protons with energies from 300 to 3000 keV were measured at the Physikalisch-Technische Bundesanstalt ion accelerator facility. The electrons emitted at angles between 15∘ and 150∘ relative to the ion-beam direction were detected with an electrostatic hemispherical electron spectrometer. Single-differential and total ionization cross sections have been derived by integration. The experimental results are compared to the semiempirical Hansen-Kocbach-Stolterfoht model as well as to the recently reported method based on the dielectric formalism. The comparison to the latter showed good agreement with experimental data in a broad range of emission angles and energies of secondary electrons. The scaling property of ionization cross sections for tetrahydrofuran was also investigated. Compared to molecules of different size, the ionization cross sections of tetrahydrofuran were found to scale with the number of valence electrons at large impact parameters.

Predicting water suppy and actual evapotranspiration of street trees

NASA Astrophysics Data System (ADS)

Wessolek, Gerd; Heiner, Moreen; Trinks, Steffen

2017-04-01

It's well known that street trees cool air temperature in summer-time by transpiration and shading and also reduce runoff. However, it's difficult to analyse if trees have water shortage or not. This contribution focus on predicting water supply, actual evapotranspiration, and runoff by using easily available climate data (precipiation, potential evapotranspiration) and site characteristics (water retention, space, sealing degree, groundwater depth). These parameter were used as input data for Hydro-Pedotransfer-Functions (HPTFs) allowing the estimation of the annual water budget. Results give statements on water supply of trees, drought stress, and additional water demand by irrigation. Procedure also analyse, to which extent the surrounding partly sealed surfaces deliver water to the trees. Four representative street canyons of Berlin City were analysed and evaluated within in training program for M.A. students of „Urban Eco-system Science" at the Technische Universität Berlin.

Investigation of Periodic Nuclear Decay Data with Spectral Analysis Techniques

NASA Astrophysics Data System (ADS)

Javorsek, D.; Sturrock, P.; Buncher, J.; Fischbach, E.; Gruenwald, T.; Hoft, A.; Horan, T.; Jenkins, J.; Kerford, J.; Lee, R.; Mattes, J.; Morris, D.; Mudry, R.; Newport, J.; Petrelli, M.; Silver, M.; Stewart, C.; Terry, B.; Willenberg, H.

2009-12-01

We provide the results from a spectral analysis of nuclear decay experiments displaying unexplained periodic fluctuations. The analyzed data was from 56Mn decay reported by the Children's Nutrition Research Center in Houston, 32Si decay reported by an experiment performed at the Brookhaven National Laboratory, and 226Ra decay reported by an experiment performed at the Physikalisch-Technische-Bundesanstalt in Germany. All three data sets possess the same primary frequency mode consisting of an annual period. Additionally a spectral comparison of the local ambient temperature, atmospheric pressure, relative humidity, Earth-Sun distance, and the plasma speed and latitude of the heliospheric current sheet (HCS) was performed. Following analysis of these six possible causal factors, their reciprocals, and their linear combinations, a possible link between nuclear decay rate fluctuations and the linear combination of the HCS latitude and 1/R motivates searching for a possible mechanism with such properties.

Traceable terahertz power measurement from 1 THz to 5 THz.

PubMed

Steiger, Andreas; Kehrt, Mathias; Monte, Christian; Müller, Ralf

2013-06-17

The metrology institute in Germany, the Physikalisch-Technische Bundesanstalt (PTB), calibrates the spectral responsivity of THz detectors at 2.52 THz traceable to International System of Units. The Terahertz detector calibration facility is equipped with a standard detector calibrated against a cryogenic radiometer at this frequency. In order to extend this service to a broader spectral range in the THz region a new standard detector was developed. This detector is based on a commercial thermopile detector. Its absorber was modified and characterized by spectroscopic methods with respect to its absorptance and reflectance from 1 THz to 5 THz and at the wavelength of a helium-neon laser in the visible spectral range. This offers the possibility of tracing back the THz power responsivity scale to the more accurate responsivity scale in the visible spectral range and thereby to reduce the uncertainty of detector calibrations in the THz range significantly.

Stereo particle image velocimetry set up for measurements in the wake of scaled wind turbines

NASA Astrophysics Data System (ADS)

Campanardi, Gabriele; Grassi, Donato; Zanotti, Alex; Nanos, Emmanouil M.; Campagnolo, Filippo; Croce, Alessandro; Bottasso, Carlo L.

2017-08-01

Stereo particle image velocimetry measurements were carried out in the boundary layer test section of Politecnico di Milano large wind tunnel to survey the wake of a scaled wind turbine model designed and developed by Technische Universität München. The stereo PIV instrumentation was set up to survey the three velocity components on cross-flow planes at different longitudinal locations. The area of investigation covered the entire extent of the wind turbines wake that was scanned by the use of two separate traversing systems for both the laser and the cameras. Such instrumentation set up enabled to gain rapidly high quality results suitable to characterise the behaviour of the flow field in the wake of the scaled wind turbine. This would be very useful for the evaluation of the performance of wind farm control methodologies based on wake redirection and for the validation of CFD tools.

Calibration of high voltages at the ppm level by the difference of ^{83{m}}Kr conversion electron lines at the KATRIN experiment

NASA Astrophysics Data System (ADS)

Arenz, M.; Baek, W.-J.; Beck, M.; Beglarian, A.; Behrens, J.; Bergmann, T.; Berlev, A.; Besserer, U.; Blaum, K.; Bode, T.; Bornschein, B.; Bornschein, L.; Brunst, T.; Buzinsky, N.; Chilingaryan, S.; Choi, W. Q.; Deffert, M.; Doe, P. J.; Dragoun, O.; Drexlin, G.; Dyba, S.; Edzards, F.; Eitel, K.; Ellinger, E.; Engel, R.; Enomoto, S.; Erhard, M.; Eversheim, D.; Fedkevych, M.; Fischer, S.; Formaggio, J. A.; Fränkle, F. M.; Franklin, G. B.; Friedel, F.; Fulst, A.; Gil, W.; Glück, F.; Ureña, A. Gonzalez; Grohmann, S.; Grössle, R.; Gumbsheimer, R.; Hackenjos, M.; Hannen, V.; Harms, F.; Haußmann, N.; Heizmann, F.; Helbing, K.; Herz, W.; Hickford, S.; Hilk, D.; Hillesheimer, D.; Howe, M. A.; Huber, A.; Jansen, A.; Kellerer, J.; Kernert, N.; Kippenbrock, L.; Kleesiek, M.; Klein, M.; Kopmann, A.; Korzeczek, M.; Kovalík, A.; Krasch, B.; Kraus, M.; Kuckert, L.; Lasserre, T.; Lebeda, O.; Letnev, J.; Lokhov, A.; Machatschek, M.; Marsteller, A.; Martin, E. L.; Mertens, S.; Mirz, S.; Monreal, B.; Neumann, H.; Niemes, S.; Off, A.; Osipowicz, A.; Otten, E.; Parno, D. S.; Pollithy, A.; Poon, A. W. P.; Priester, F.; Ranitzsch, P. C.-O.; Rest, O.; Robertson, R. G. H.; Roccati, F.; Rodenbeck, C.; Röllig, M.; Röttele, C.; Ryšavý, M.; Sack, R.; Saenz, A.; Schimpf, L.; Schlösser, K.; Schlösser, M.; Schönung, K.; Schrank, M.; Seitz-Moskaliuk, H.; Sentkerestiová, J.; Sibille, V.; Slezák, M.; Steidl, M.; Steinbrink, N.; Sturm, M.; Suchopar, M.; Suesser, M.; Telle, H. H.; Thorne, L. A.; Thümmler, T.; Titov, N.; Tkachev, I.; Trost, N.; Valerius, K.; Vénos, D.; Vianden, R.; Hernández, A. P. Vizcaya; Weber, M.; Weinheimer, C.; Weiss, C.; Welte, S.; Wendel, J.; Wilkerson, J. F.; Wolf, J.; Wüstling, S.; Zadoroghny, S.

2018-05-01

The neutrino mass experiment KATRIN requires a stability of 3 ppm for the retarding potential at - 18.6 kV of the main spectrometer. To monitor the stability, two custom-made ultra-precise high-voltage dividers were developed and built in cooperation with the German national metrology institute Physikalisch-Technische Bundesanstalt (PTB). Until now, regular absolute calibration of the voltage dividers required bringing the equipment to the specialised metrology laboratory. Here we present a new method based on measuring the energy difference of two ^{83{m}}Kr conversion electron lines with the KATRIN setup, which was demonstrated during KATRIN's commissioning measurements in July 2017. The measured scale factor M=1972.449(10) of the high-voltage divider K35 is in agreement with the last PTB calibration 4 years ago. This result demonstrates the utility of the calibration method, as well as the long-term stability of the voltage divider.

ARGon{sup 3}: ''3D appearance robot-based gonioreflectometer'' at PTB

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoepe, A.; Atamas, T.; Huenerhoff, D.

At the Physikalisch-Technische Bundesanstalt, the National Metrology Institute of Germany, a new facility for measuring visual appearance-related quantities has been built up. The acronym ARGon{sup 3} stands for ''3D appearance robot-based gonioreflectometer''. Compared to standard gonioreflectometers, there are two main new features within this setup. First, a photometric luminance camera with a spatial resolution of 28 {mu}m on the device under test (DUT) enables spatially high-resolved measurements of luminance and color coordinates. Second, a line-scan CCD-camera mounted to a spectrometer provides measurements of the radiance factor, respectively the bidirectional reflectance distribution function, in full V({lambda})-range (360 nm-830 nm) with arbitrarymore » angles of irradiation and detection relative to the surface normal, on a time scale of about 2 min. First goniometric measurements of diffuse reflection within 3D-space above the DUT with subsequent colorimetric representation of the obtained data of special effect pigments based on the interference effect are presented.« less

Photomask linewidth comparison by PTB and NIST

NASA Astrophysics Data System (ADS)

Bergmann, D.; Bodermann, B.; Bosse, H.; Buhr, E.; Dai, G.; Dixson, R.; Häßler-Grohne, W.; Hahm, K.; Wurm, M.

2015-10-01

We report the initial results of a recent bilateral comparison of linewidth or critical dimension (CD) calibrations on photomask line features between two national metrology institutes (NMIs): the National Institute of Standards and Technology (NIST) in the United States and the Physikalisch-Technische Bundesanstalt (PTB) in Germany. For the comparison, a chrome on glass (CoG) photomask was used which has a layout of line features down to 100 nm nominal size. Different measurement methods were used at both institutes. These included: critical dimension atomic force microscopy (CD-AFM), CD scanning electron microscopy (CD-SEM) and ultraviolet (UV) transmission optical microscopy. The measurands are CD at 50 % height of the features as well as sidewall angle and line width roughness (LWR) of the features. On the isolated opaque features, we found agreement of the CD measurements at the 3 nm to 5 nm level on most features - usually within the combined expanded uncertainties of the measurements.

Closing remarks at the symposium in honour of Daniel Bellus. Pharmacenter, University of Basel, February 6, 2009.

PubMed

Ganter, Camille

2010-01-01

In the Closing Remarks at the Symposium on 'Frontiers in Bioorganic Chemistry' (Friday, February 6, 2009, Pharmacenter, University of Basel) in honour of Daniel Bellus, his arrival in Zürich in fall 1967 and especially his postdoctoral work at the Laboratorium für Organische Chemie at the Eidgenössische Technische Hochschule (ETH) in Zürich throughout the year 1967/68 were mentioned. In his most remarkable paper (published in 1969 in Helv. Chim. Acta), the photochemistry of the alpha,beta-unsaturated cyclohexenones O-acetyl-testosterone and 10-methy-delta1,9-octalon-(2) is described in detail. Change of solvent leads to lowering or increasing of the n,pi*- and (pi,pi*)-triplet energies, resulting in a crossing of the two energy levels. Personal remarks on Daniel Bellus and warmest thanks to him, to Profs. Beat Ernst and Bernd Giese (the organizers of the symposium) and to all the speakers concluded this most special event.

Electromagnetic DM technology meets future AO demands

NASA Astrophysics Data System (ADS)

Hamelinck, Roger; Rosielle, Nick; Steinbuch, Maarten; Doelman, Niek

New deformable mirror technology is developed by the Technische Universiteit Eindhoven, Delft University of Technology and TNO Science and Industry. Several prototype adaptive deformable mirrors are realized mirrors, up to 427 actuators and ∅150mm diameter, with characteristics suitable for future AO systems. The prototypes consist of a 100µm thick, continuous facesheet on which low voltage, electromagnetic, push-pull actuators impose out-of-plane displacements. The variable reluctance actuators with ±10µm stroke and nanometer resolution are located in a standard actuator module. Each module with 61 actuators connects to a single PCB with dedicated, 16 bit, PWM based, drivers. A LVDS multi-drop cable connects up to 32 actuator modules. With the actuator module, accompanying PCB and multi-drop system the deformable mirror technology is made modular in its mechanics and electronics. An Ethernet-LVDS bridge enables any commercial PC to control the mirror using the UDP standard. Latest results of the deformable mirror technology development are presented.

Simulation of a GOX-kerosene subscale rocket combustion chamber

NASA Astrophysics Data System (ADS)

Höglauer, Christoph; Kniesner, Björn; Knab, Oliver; Kirchberger, Christoph; Schlieben, Gregor; Kau, Hans-Peter

2011-12-01

In view of future film cooling tests at the Institute for Flight Propulsion (LFA) at Technische Universität München, the Astrium in-house spray combustion CFD tool Rocflam-II was validated against first test data gained from this rocket test bench without film cooling. The subscale rocket combustion chamber uses GOX and kerosene as propellants which are injected through a single double swirl element. Especially the modeling of the double swirl element and the measured wall roughness were adapted on the LFA hardware. Additionally, new liquid kerosene fluid properties were implemented and verified in Rocflam-II. Also the influences of soot deposition and hot gas radiation on the wall heat flux were analytically and numerically estimated. In context of reviewing the implemented evaporation model in Rocflam-II, the binary diffusion coefficient and its pressure dependency were analyzed. Finally simulations have been performed for different load points with Rocflam-II showing a good agreement compared to test data.

Carrier-phase two-way satellite frequency transfer over a very long baseline

NASA Astrophysics Data System (ADS)

Fujieda, M.; Piester, D.; Gotoh, T.; Becker, J.; Aida, M.; Bauch, A.

2014-06-01

In this paper we report that carrier-phase two-way satellite time and frequency transfer (TWSTFT) was successfully demonstrated over a very long baseline of 9000 km, established between the National Institute of Information and Communications Technology (NICT) and the Physikalisch-Technische Bundesanstalt (PTB). We verified that the carrier-phase TWSTFT (TWCP) result agreed with those obtained by conventional TWSTFT and GPS carrier-phase (GPSCP) techniques. Moreover, a much improved short-term instability for frequency transfer of 2 × 10-13 at 1 s was achieved, which is at the same level as previously confirmed over a shorter baseline within Japan. The precision achieved was so high that the effects of ionospheric delay became significant; they are ignored in conventional TWSTFT even over a long link. We compensated for these effects using ionospheric delays computed from regional vertical total electron content maps. The agreement between the TWCP and GPSCP results was improved because of this compensation.

Adaption of an array spectroradiometer for total ozone column retrieval using direct solar irradiance measurements in the UV spectral range

NASA Astrophysics Data System (ADS)

Zuber, Ralf; Sperfeld, Peter; Riechelmann, Stefan; Nevas, Saulius; Sildoja, Meelis; Seckmeyer, Gunther

2018-04-01

A compact array spectroradiometer that enables precise and robust measurements of solar UV spectral direct irradiance is presented. We show that this instrument can retrieve total ozone column (TOC) accurately. The internal stray light, which is often the limiting factor for measurements in the UV spectral range and increases the uncertainty for TOC analysis, is physically reduced so that no other stray-light reduction methods, such as mathematical corrections, are necessary. The instrument has been extensively characterised at the Physikalisch-Technische Bundesanstalt (PTB) in Germany. During an international total ozone measurement intercomparison at the Izaña Atmospheric Observatory in Tenerife, the high-quality applicability of the instrument was verified with measurements of the direct solar irradiance and subsequent TOC evaluations based on the spectral data measured between 12 and 30 September 2016. The results showed deviations of the TOC of less than 1.5 % from most other instruments in most situations and not exceeding 3 % from established TOC measurement systems such as Dobson or Brewer.

Research on new dynamic force calibration system

NASA Astrophysics Data System (ADS)

Zhang, Li

2008-06-01

Sinusoidal force calibration method based on electrodynamic shaker and interferometric system was studied several years before at Physikalisch-Technische Bundesanstalt (PTB). In that system a load mass are screwed on the top of force transducer, the sinusoidal forces realized by accelerated load masses are traceable to acceleration and mass according to the force definition F(t) = ma(t), where m is the total mass acting on the sensing element of the force transducer and a is the time and spatial-dependent acceleration of the mass, which is directly measured by a laser interferometer. This paper will introduce a new dynamic force calibration system developed at Changcheng Institute of Metrology and Measurement (CIMM). It uses electrodynamic shakers to generate dynamic force in the range from 1N to 20kN, and heterodyne laser interferometers are used for acceleration measurement. A new air bearing system is developed to increase the performance of shakers and an active vibration isolator is used to reduce enviromental disturbance to the interferometric system.

Novel spectrometers for environmental dose rate monitoring.

PubMed

Kessler, P; Behnke, B; Dabrowski, R; Dombrowski, H; Röttger, A; Neumaier, S

2018-07-01

A new generation of dosemeters, based on the scintillators LaBr 3 , CeBr 3 and SrI 2 , read out with conventional photomultipliers, to be used in the field of environmental gamma-radiation monitoring, was investigated. The main features of these new instruments and especially their outdoor performance, studied by long-term investigations under real weather conditions, are presented. The systems were tested at the reference sites for environmental radiation of the Physikalisch-Technische Bundesanstalt. The measurements are compared with that of well characterized classical dose rate reference instruments to demonstrate the suitability of new spectrometers for environmental dose rate monitoring even in adverse weather conditions. Their potential to replace the (mainly Geiger Müller based) dose rate meters operated in about 5000 European early waning network stations as well as in environmental radiation monitoring in general is shown. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Comparison of Fixed Point Realisations between Inmetro and PTB

NASA Astrophysics Data System (ADS)

Santiago, J. F. N.; Petkovic, S. G.; Teixeira, R. N.; Noatsch, U.; Thiele-Krivoj, B.

2003-09-01

An interlaboratory comparison in the temperature range between -190 °C and 420 °C was organised between the National Institute of Quality, Normalisation and Industrial Quality (Inmetro), Brazil, and the Physikalisch Technische Bundesanstalt (PTB), Germany. This comparison followed the same protocol as the EUROMET project 552 comparison and was carried out in the years 2001-2002. A standard platinum resistance thermometer (SPRT) of 25 Ω was calibrated at the temperature fixed points of Ar, Hg, the triple point of water (TWP), Ga, In, Sn and Zn, with at least three realisations of each fixed point at both institutes. The uncertainty evaluation is given by Inmetro and some differences in the calibration procedures or in the measuring instruments used are described. The agreement between the results of laboratories was not in all cases within the combined uncertainties. Results of other comparisons are presented, which give additional information on the equivalence of the realised temperature scales.

Comparison of the NIST and PTB Air-Kerma Standards for Low-Energy X-Rays.

PubMed

O'Brien, Michelle; Bueermann, Ludwig

2009-01-01

A comparison has been made of the air-kerma standards for low-energy x rays at the National Institute of Standards and Technology (NIST) and the Physikalisch-Technische Bundesanstalt (PTB). The comparison involved a series of measurements at the PTB and the NIST using the air-kerma standards and two NIST reference-class transfer ionization chamber standards. Results are presented for the reference radiation beam qualities in the range from 25 kV to 50 kV for low energy x rays, including the techniques used for mammography dose traceability. The tungsten generated reference radiation qualities, between 25 kV and 50 kV used for this comparison, are new to NIST; therefore this comparison will serve as the preliminary comparison for NIST and a verification of the primary standard correction factors. The mammography comparison will repeat two previously unpublished comparisons between PTB and NIST. The results show the standards to be in reasonable agreement within the standard uncertainty of the comparison of about 0.4 %.

Characterization of the UV detector of Solar Orbiter/Metis

NASA Astrophysics Data System (ADS)

Uslenghi, Michela; Schühle, Udo H.; Teriaca, Luca; Heerlein, Klaus; Werner, Stephan

2017-08-01

Metis, one of the instruments of the ESA mission Solar Orbiter (to be launched in February 2019), is a coronograph able to perform broadband polarization imaging in the visible range (580-640 nm), and narrow band imaging in UV (HI Lyman-α 121.6 nm) . The detector of the UV channel is an intensified camera, based on a Star-1000 rad-hard CMOS APS coupled via a 2:1 fiber optic taper to a single stage Microchannel Plate intensifier, sealed with an entrance MgF2 window and provided with an opaque KBr photocathode. Before integration in the instrument, the UVDA (UV Detector Assembly) Flight Model has been characterized at the MPS laboratory and calibrated in the UV range using the detector calibration beamline of the Metrology Light Source synchrotron of the Physikalisch-Technische Bundesanstalt (PTB). Linearity, spectral calibration, and response uniformity at 121.6 nm have been measured. Preliminary results are reported in this paper.

Supplementary comparison EURAMET.L-S24 on involute gear standards

NASA Astrophysics Data System (ADS)

Kniel, K.; Chanthawong, N.; Eastman, N.; Frazer, R.; Kupko, V.; Osawa, S.; Xue, Z.

2014-01-01

At its meeting in 2007, the EURAMET TC-Length decided to run an intercomparison of involute gear standards as a regional comparison with non-European involvement. The Physikalisch-Technische Bundesanstalt, Braunschweig und Berlin, Germany (PTB) was identified as the pilot laboratory, responsible for planning, organizing and analyzing the comparison. In all, seven participants from China, Germany, Japan, Thailand, Ukraine, United Kingdom and USA were asked to measure three different gear standards specialized for profile, helix and pitch measurements. The measurements started mid 2008 and were finished at the end of 2010. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The comparison was registered as the supplementary comparison EURAMET.L-S24. The final report has been peer-reviewed and approved for publication by the CCL WG-MRA, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Procedures for Computing Transonic Flows for Control of Adaptive Wind Tunnels. Ph.D. Thesis - Technische Univ., Berlin, Mar. 1986

NASA Technical Reports Server (NTRS)

Rebstock, Rainer

1987-01-01

Numerical methods are developed for control of three dimensional adaptive test sections. The physical properties of the design problem occurring in the external field computation are analyzed, and a design procedure suited for solution of the problem is worked out. To do this, the desired wall shape is determined by stepwise modification of an initial contour. The necessary changes in geometry are determined with the aid of a panel procedure, or, with incident flow near the sonic range, with a transonic small perturbation (TSP) procedure. The designed wall shape, together with the wall deflections set during the tunnel run, are the input to a newly derived one-step formula which immediately yields the adapted wall contour. This is particularly important since the classical iterative adaptation scheme is shown to converge poorly for 3D flows. Experimental results obtained in the adaptive test section with eight flexible walls are presented to demonstrate the potential of the procedure. Finally, a method is described to minimize wall interference in 3D flows by adapting only the top and bottom wind tunnel walls.

Infinitesimal Bäcklund Transformation and Conservation Laws for Non-autonomous Systems

NASA Astrophysics Data System (ADS)

Mahato, G.; Chowdhury, A. Roy

We have observed that it is possible to extend the concept of the infinitesimal Bäcklund transformation of Steudel to the case of non-autonomous systems. We have discussed the situation with the cylindrical KdV as example. The interesting point to note is that though the B.T. for Ckdv does not possess the usual property of generating one soliton in a single operation, yet it generates an infinite number of symmetries, which corroborates with those obtained through the expansion of the resolvant of the linear operator associated with the equation.Translated AbstractInfinitesimale Bäcklund-Transformation und Erhaltungsgesetze nichtautonomer SystemeWir finden, daß es möglich ist, das Steudelsche Konzept der infinitesimalen Bäcklund-Transformation auf den Fall nichtautonomer Systeme zu übertragen. Als ein Beispiel wird die Situation bei einer zylindrischen KdV-Gleichung pehandelt. Der interessante Punkt ist dabei, daß die Bäcklund-Transformation - obwohl sie für die zylindrische KdV-Gleichung die übliche Eigenschaft, ein Soliton durch eine einzige Operation zu erzeugen, nicht besitzt - doch eine unendliche Zahl von Symmetrien erzeugt. Das bestätigt die Ergebnisse, die man durch Entwicklung der Resolvente des mit der Gleichung verknüpften linearen Operators erhält.

Study of glass hydrometer calibration by hydrostatic weighting

NASA Astrophysics Data System (ADS)

Chen, Chaoyun; Wang, Jintao; Li, Zhihao; Zhang, Peiman

2016-01-01

Glass hydrometers are simple but effective instruments for measuring the density of liquids. Glass hydrometers calibration based on the Archimedes law, using silicon ring as a reference standard solid density, n-tridecane with density stability and low surface tension as the standard working liquid, based on hydrostatic weighing method designs a glass hydrometer calibration system. Glass hydrometer calibration system uses CCD image measurement system to align the scale of hydrometer and liquid surface, with positioning accuracy of 0.01 mm. Surface tension of the working liquid is measured by Whihemy plate. According to twice glass hydrometer weighing in the air and liquid can calculate the correction value of the current scale. In order to verify the validity of the principle of the hydrostatic weighing method of glass hydrometer calibration system, for measuring the density range of (770-790) kg/m3, with a resolution of 0.2 kg/m3 of hydrometer. The results of measurement compare with the Physikalisch-Technische Bundesanstalt(PTB) ,verifying the validity of the calibration system.

Vienna VLBI and Satellite Software (VieVS) for Geodesy and Astrometry

NASA Astrophysics Data System (ADS)

Böhm, Johannes; Böhm, Sigrid; Boisits, Janina; Girdiuk, Anastasiia; Gruber, Jakob; Hellerschmied, Andreas; Krásná, Hana; Landskron, Daniel; Madzak, Matthias; Mayer, David; McCallum, Jamie; McCallum, Lucia; Schartner, Matthias; Teke, Kamil

2018-04-01

The Vienna VLBI and Satellite Software (VieVS) is state-of-the-art Very Long Baseline Interferometry (VLBI) analysis software for geodesy and astrometry. VieVS has been developed at Technische Universität Wien (TU Wien) since 2008, where it is used for research purposes and for teaching space geodetic techniques. In the past decade, it has been successfully applied on Very Long Baseline Interferometry (VLBI) observations for the determination of celestial and terrestrial reference frames as well as for the estimation of celestial pole offsets, universal Time (UT1-UTC), and polar motion based on least-squares adjustment. Furthermore, VieVS is equipped with tools for scheduling and simulating VLBI observations to extragalactic radio sources as well as to satellites and spacecraft, features which proved to be very useful for a variety of applications. VieVS is now available as version 3.0 and we do provide the software to all interested persons and institutions. A wiki with more information about VieVS is available at http://vievswiki.geo.tuwien.ac.at/.

Phasenübergänge

NASA Astrophysics Data System (ADS)

Heintze, Joachim

Bisher haben wir nur das thermische Verhalten von Stoffen einheitlicher Konsistenz diskutiert. Eines der auffälligsten Phänomene in der Physik der Wärme ist aber, dass ein Stoff in verschiedenen Aggregatzuständen vorliegen kann: fest, flüssig oder gasförmig, und dass durch Wärmezufuhr und -abfuhr Übergänge zwischen diesen verschiedenen Phasen bewirkt werden. Zunächst werden wir die Phasenübergänge flüssig-gasförmig und fest-gasförmig ausführlich diskutieren. Dann zeigen wir, dass der Phasenübergang fest-flüssig auf ganz ähnliche Weise beschrieben werden kann. Eine zusammenfassende Darstellung der Phasenübergänge ist in der Form von Zustandsdiagrammen möglich. Die Untersuchung solcher Diagramme führt auf das interessante Phänomen des kritischen Punktes. Am Schluss des Kapitels betrachten wir Phasenübergänge in Zweistoffsystemen. Sie weisen einige Eigenschaften auf, die nicht nur merkwürdig und physikalisch interessant, sondern vor allem auch technisch von Bedeutung sind.

Status and plans for the future of the Vienna VLBI Software

NASA Astrophysics Data System (ADS)

Madzak, Matthias; Böhm, Johannes; Böhm, Sigrid; Girdiuk, Anastasiia; Hellerschmied, Andreas; Hofmeister, Armin; Krasna, Hana; Kwak, Younghee; Landskron, Daniel; Mayer, David; McCallum, Jamie; Plank, Lucia; Schönberger, Caroline; Shabala, Stanislav; Sun, Jing; Teke, Kamil

2016-04-01

The Vienna VLBI Software (VieVS) is a VLBI analysis software developed and maintained at Technische Universität Wien (TU Wien) since 2008 with contributions from groups all over the world. It is used for both academic purposes in university courses as well as for providing VLBI analysis results to the geodetic community. Written in a modular structure in Matlab, VieVS offers easy access to the source code and the possibility to adapt the programs for particular purposes. The new version 2.3, released in December 2015, includes several new parameters to be estimated in the global solution, such as tidal ERP variation coefficients. The graphical user interface was slightly modified for an improved user functionality and, e.g., the possibility of deriving baseline length repeatabilities. The scheduling of satellite observations was refined, the simulator newly includes the effect of source structure which can also be corrected for in the analysis. This poster gives an overview of all VLBI-related activities in Vienna and provides an outlook to future plans concerning the Vienna VLBI Software.

Time-resolved Fast Neutron Radiography of Air-water Two-phase Flows

NASA Astrophysics Data System (ADS)

Zboray, Robert; Dangendorf, Volker; Mor, Ilan; Tittelmeier, Kai; Bromberger, Benjamin; Prasser, Horst-Michael

Neutron imaging, in general, is a useful technique for visualizing low-Z materials (such as water or plastics) obscured by high-Z materials. However, when significant amounts of both materials are present and full-bodied samples have to be examined, cold and thermal neutrons rapidly reach their applicability limit as the samples become opaque. In such cases one can benefit from the high penetrating power of fast neutrons. In this work we demonstrate the feasibility of time-resolved, fast neutron radiography of generic air-water two-phase flows in a 1.5 cm thick flow channel with Aluminum walls and rectangular cross section. The experiments have been carried out at the high-intensity, white-beam facility of the Physikalisch-Technische Bundesanstalt, Germany. Exposure times down to 3.33 ms have been achieved at reasonable image quality and acceptable motion artifacts. Different two-phase flow regimes such as bubbly slug and churn flows have been examined. Two-phase flow parameters like the volumetric gas fraction, bubble size and bubble velocities have been measured.

A new Ultra Precision Interferometer for absolute length measurements down to cryogenic temperatures

NASA Astrophysics Data System (ADS)

Schödel, R.; Walkov, A.; Zenker, M.; Bartl, G.; Meeß, R.; Hagedorn, D.; Gaiser, C.; Thummes, G.; Heltzel, S.

2012-09-01

A new Ultra Precision Interferometer (UPI) was built at Physikalisch-Technische Bundesanstalt. As its precursor, the precision interferometer, it was designed for highly precise absolute length measurements of prismatic bodies, e.g. gauge blocks, under well-defined temperature conditions and pressure, making use of phase stepping imaging interferometry. The UPI enables a number of enhanced features, e.g. it is designed for a much better lateral resolution and better temperature stability. In addition to the original concept, the UPI is equipped with an external measurement pathway (EMP) in which a prismatic body can be placed alternatively. The temperature of the EMP can be controlled in a much wider range compared to the temperature of the interferometer's main chamber. An appropriate cryostat system, a precision temperature measurement system and improved imaging interferometry were established to permit absolute length measurements down to cryogenic temperature, demonstrated for the first time ever. Results of such measurements are important for studying thermal expansion of materials from room temperature towards less than 10 K.

Evaluation of a digital data acquisition system and optimization of n-γ discrimination for a compact neutron spectrometer.

PubMed

Giacomelli, L; Zimbal, A; Reginatto, M; Tittelmeier, K

2011-01-01

A compact NE213 liquid scintillation neutron spectrometer with a new digital data acquisition (DAQ) system is now in operation at the Physikalisch-Technische Bundesanstalt (PTB). With the DAQ system, developed by ENEA Frascati, neutron spectrometry with high count rates in the order of 5×10(5) s(-1) is possible, roughly an order of magnitude higher than with an analog acquisition system. To validate the DAQ system, a new data analysis code was developed and tests were done using measurements with 14-MeV neutrons made at the PTB accelerator. Additional analysis was carried out to optimize the two-gate method used for neutron and gamma (n-γ) discrimination. The best results were obtained with gates of 35 ns and 80 ns. This indicates that the fast and medium decay time components of the NE213 light emission are the ones that are relevant for n-γ discrimination with the digital acquisition system. This differs from what is normally implemented in the analog pulse shape discrimination modules, namely, the fast and long decay emissions of the scintillating light.

Compact NE213 neutron spectrometer with high energy resolution for fusion applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zimbal, A.; Reginatto, M.; Schuhmacher, H.

Neutron spectrometry is a tool for obtaining important information on the fuel ion composition, velocity distribution and temperature of fusion plasmas. A compact NE213 liquid scintillator, fully characterized at Physikalisch-Technische Bundesanstalt, was installed and operated at the Joint European Torus (JET) during two experimental campaigns (C8-2002 and trace tritium experiment-TTE 2003). The results show that this system can operate in a real fusion experiment as a neutron (1.5 MeV

Realization of the medium and high vacuum primary standard in CENAM, Mexico

NASA Astrophysics Data System (ADS)

Torres-Guzman, J. C.; Santander, L. A.; Jousten, K.

2005-12-01

A medium and high vacuum primary standard, based on the static expansion method, has been set up at Centro Nacional de Metrología (CENAM), Mexico. This system has four volumes and covers a measuring range of 1 × 10-5 Pa to 1 × 103 Pa of absolute pressure. As part of its realization, a characterization was performed, which included volume calibrations, several tests and a bilateral key comparison. To determine the expansion ratios, two methods were applied: the gravimetric method and the method with a linearized spinning rotor gauge. The outgassing ratios for the whole system were also determined. A comparison was performed with Physikalisch-Technische Bundesanstalt (comparison SIM-Euromet.M.P-BK3). By means of this comparison, a link has been achieved with the Euromet comparison (Euromet.M.P-K1.b). As a result, it is concluded that the value obtained at CENAM is equivalent to the Euromet reference value, and therefore the design, construction and operation of CENAM's SEE-1 vacuum primary standard were successful.

Improved GPS-based time link calibration involving ROA and PTB.

PubMed

Esteban, Héctor; Palacio, Juan; Galindo, Francisco Javier; Feldmann, Thorsten; Bauch, Andreas; Piester, Dirk

2010-03-01

The calibration of time transfer links is mandatory in the context of international collaboration for the realization of International Atomic Time. In this paper, we present the results of the calibration of the GPS time transfer link between the Real Instituto y Observatorio de la Armada (ROA) and the Physikalisch-Technische Bundesanstalt (PTB) by means of a traveling geodetic-type GPS receiver and an evaluation of the achieved type A and B uncertainty. The time transfer results were achieved by using CA, P3, and also carrier phase PPP comparison techniques. We finally use these results to re-calibrate the two-way satellite time and frequency transfer (TWSTFT) link between ROA and PTB, using one month of data. We show that a TWSTFT link can be calibrated by means of GPS time comparisons with an uncertainty below 2 ns, and that potentially even sub-nanosecond uncertainty can be achieved. This is a novel and cost-effective approach compared with the more common calibration using a traveling TWSTFT station.

Relative efficiency calibration between two silicon drift detectors performed with a monochromatized X-ray generator over the 0.1-1.5 keV range

NASA Astrophysics Data System (ADS)

Hubert, S.; Boubault, F.

2018-03-01

In this article, we present the first X-ray calibration performed over the 0.1-1.5 keV spectral range by means of a soft X-ray Manson source and the monochromator SYMPAX. This monochromator, based on a classical Rowland geometry, presents the novelty to be able to board simultaneously two detectors and move them under vacuum in front of the exit slit of the monochromatizing stage. This provides the great advantage to perform radiometric measurements of the monochromatic X-ray photon flux with one reference detector while calibrating another X-ray detector. To achieve this, at least one secondary standard must be operated with SYMPAX. This paper presents thereby an efficiency transfer experiment between a secondary standard silicon drift detector (SDD), previously calibrated on BESSY II synchrotron Facility, and another one ("unknown" SDD), devoted to be used permanently with SYMPAX. The associated calibration process is described as well as corresponding results. Comparison with calibrated measurements performed at the Physikalisch-Technische Bundesanstalt (PTB) Radiometric Laboratory shows a very good agreement between the secondary standard and the unknown SDD.

Patrick Couvreur: inspiring pharmaceutical innovation.

PubMed

Stanwix, Hannah

2014-05-01

Patrick Couvreur speaks to Hannah Stanwix, Managing Comissioning Editor: Professor Patrick Couvreur received his pharmacy degree from the Université Catholique de Louvain (Louvain-la-Neuve, Belgium) in 1972. He holds a PhD in pharmaceutical technology from the same university and completed a postdoctoral fellowship at the Eidgenössische Technische Hochschule (Zürich, Switzerland). Since 1984, Professor Couvreur has been Full Professor of Pharmacy at the Paris-Sud University (Paris, France) and was holder of the Chair of Innovation Technologique at the prestigious Collège de France (Paris, France). He has published more than 450 peer-reviewed articles and has an H-index of 73, with over 19,000 citations. Professor Coureur has been recognized by numerous national and international awards, including the 2004 Pharmaceutical Sciences World Congress Award, the prestigious Host Madsen Medal, the Prix Galien, the European Pharmaceutical Scientist Award 2011 from the European Federation of Pharmaceutical Sciences, the Médaille de l'Innovation from the Centre National de la Recherche Scientifique, and recently the European Inventor Award 2013 from the European Patent Office.

Development of a New Fundamental Measuring Technique for the Accurate Measurement of Gas Flowrates by Means of Laser Doppler Anemometry

NASA Astrophysics Data System (ADS)

Dopheide, D.; Taux, G.; Krey, E.-A.

1990-01-01

In the Physikalisch-Technische Bundesanstalt (PTB), a research test facility for the accurate measurement of gas (volume and mass) flowrates has been set up in the last few years on the basis of a laser Doppler anemometer (LDA) with a view to directly measuring gas flowrates with a relative uncertainty of only 0,1%. To achieve this, it was necessary to develop laser Doppler anemometry into a precision measuring technique and to carry out detailed investigations on stationary low-turbulence nozzle flow. The process-computer controlled test facility covers the flowrate range from 100 to 4000 m3/h (~0,03 - 1,0 m3/s), any flowrate being measured directly, immediately and without staggered arrangement of several flow meters. After the development was completed, several turbine-type gas meters were calibrated and international comparisons carried out. The article surveys the most significant aspects of the work and provides an outlook on future developments with regard to the miniaturization of optical flow and flowrate sensors for industrial applications.

Immunotoxicity and genotoxicity testing for in-flight experiments under microgravity

NASA Astrophysics Data System (ADS)

Hansen, Peter-Diedrich; Hansen, Peter-Diedrich; Unruh, Eckehardt

Life Sciences as Related to Space (F) Influence of Spaceflight Environment on Biological Systems (F44) Immunotoxicity and genotoxicity testing for In-flight experiments under microgravity Sensing approaches for ecosystem and human health Author: Peter D. Hansen Technische Universit¨t Berlin, Faculty VI - Planen, Bauen, Umwelt, a Institute for Ecological Research and Technology, Department for Ecotoxicology, Berlin, Germany Peter-diedrich.hansen@tu-berlin.de Eckehardt Unruh Technische Universit¨t Berlin, Faculty VI - Planen, Bauen, Umwelt, Institute a for Ecological Research and Technology, Department for Ecotoxicology, Berlin, Germany An immune response by mussel hemocytes is the selective reaction to particles which are identified as foreign by its immune system shown by phagocytosis. Phagocytotic activity is based on the chemotaxis and adhesion, ingestion and phagosome formation. The attachment at the surface of the hemocytes and consequently the uptake of the particles or bacteria can be directly quantified in the format of a fluorescent assay. Another relevant endpoint of phagocytosis is oxidative burst measured by luminescence. Phagocytosis-related production of ROS will be stimulated with opsonised zymosan. The hemocytes will be stored frozen at -80oC and reconstituted in-flight for the experiment. The assay system of the TRIPLELUX-B Experiment has been performed with a well-defined quantification and evaluation of the immune function phagocytosis. The indicator cells are the hemocytes of blue mussels (Mytilus edulis). The signals of the immuno cellular responses are translated into luminescence as a rapid optical reporter system. The results expected will determine whether the observed responses are caused by microgravity and/or radiation (change in permeability, endpoints in genotoxicity: DNA unwinding). The samples for genotoxicity will be processed after returning to earth. The immune system of invertebrates has not been studied so far in space. The

Sonification of acoustic emission data

NASA Astrophysics Data System (ADS)

Raith, Manuel; Große, Christian

2014-05-01

purposes (students, co-workers). On goal is to establish a real-time frequency transformation into the audio range to avoid time consuming visual data processing during the experiments. It is also the intention to analyze the signals using psycho-acoustic methods with the help of specialists from electrical engineering. Reference: Raith, Manuel (2013). "Schallemissionsanalyse bei Pulloutexperimenten an Verbunddübeln" Masterarbeit. Technische Universität München, Lehrstuhl für Zerstörungsfreie Prüfung. Malm, Fabian (2012). "Schallemissionsanalyse am humanen Femur" Masterarbeit. Technische Universität München, Lehrstuhl für Zerstörungsfreie Prüfung. Richter R. (2009): Einsatz der Schallemissionsanalyse zur Detektion des Riss und Abplatzungsverhaltens von Beton unter Brandeinwirkung. Diplomarbeit. Materialprüfungsanstalt Universität Stuttgart Keywords: Acoustic emission, bonded anchors, femur, pullout test, fire-spalling

Frühe Stresserfahrungen und Krankheitsvulnerabilität

PubMed Central

Entringer, Sonja; Buss, Claudia; Heim, Christine

2016-01-01

Zusammenfassung Hintergrund Das stetig wachsende Forschungsgebiet der “Frühe[n] Programmierung von Krankheit und Gesundheit” untersucht, inwieweit die individuelle Vulnerabilität für die Entstehung verschiedenster Erkrankungen über die Lebensspanne bereits während der frühen Entwicklung beeinflusst wird. Ziele der Arbeit In der vorliegenden Übersichtsarbeit werden das Konzept der frühen Programmierung von Krankheitsvulnerabilität erläutert sowie Befunde zu den Folgen frühkindlicher Traumatisierung und pränataler Stressexposition zusammenfassend dargestellt. Es werden außerdem biologische Mechanismen diskutiert, die das erhöhte Krankheitsrisiko nach lebensgeschichtlich früher Stresserfahrungen vermitteln. Die Möglichkeit der transgenerationalen Transmission frühkindlicher Erfahrungen an die nächste Generation und die zugrundeliegenden Mechanismen dieser Übertragung werden ebenfalls vorgestellt. Fazit Die Befundlage zu Stresserfahrungen im frühen Leben und der Entstehung von psychischen und körperlichen Störungen über die Lebensspanne wächst stetig. Die Mechanismen werden derzeit weiter bis hin zur molekularbiologischen und epigenetischen Ebene erforscht. Hier ergeben sich ganz neue Perspektiven, welche die Präzision klinischer Diagnostik und den Erfolg von Interventionen erheblich verbessern könnten. Momentan existiert jedoch noch ein erheblicher Mangel an Translation zwischen diesen Forschungserkenntnissen und deren Anwendung in der klinischen Versorgung. PMID:27604117

Grüne Infrastruktur -. Konzepte und Strategien zur Förderung eines Bewusstseins für den Wert von Stadtgrün

NASA Astrophysics Data System (ADS)

Menke, Peter

2016-06-01

Due to climate change, but also because of the demographic change and financial constraints in many municipalities, the future of cities is a currently much-discussed topic. Conflicts over land-use are inevitable: As densification is an essential principle in growing cities, the pressure on open (green) spaces rises. Climate Change and water-management as well as mobility-issues and air-quality confront municipalities with new challenges, in terms of open space planning and greenery in the city. It is necessary to save the existing green in these days of budget-shortage and other priorities in communities. Municipalities have to raise new strategies to strengthen the awareness of the value of green in public and in the local business.

Development and production of a multilayer-coated x-ray reflecting stack for the Athena mission

NASA Astrophysics Data System (ADS)

Massahi, S.; Ferreira, D. D. M.; Christensen, F. E.; Shortt, B.; Girou, D. A.; Collon, M.; Landgraf, B.; Barriere, N.; Krumrey, M.; Cibik, L.; Schreiber, S.

2016-07-01

The Advanced Telescope for High-Energy Astrophysics, Athena, selected as the European Space Agency's second large-mission, is based on the novel Silicon Pore Optics X-ray mirror technology. DTU Space has been working for several years on the development of multilayer coatings on the Silicon Pore Optics in an effort to optimize the throughput of the Athena optics. A linearly graded Ir/B4C multilayer has been deposited on the mirrors, via the direct current magnetron sputtering technique, at DTU Space. This specific multilayer, has through simulations, been demonstrated to produce the highest reflectivity at 6 keV, which is a goal for the scientific objectives of the mission. A critical aspect of the coating process concerns the use of photolithography techniques upon which we will present the most recent developments in particular related to the cleanliness of the plates. Experiments regarding the lift-off and stacking of the mirrors have been performed and the results obtained will be presented. Furthermore, characterization of the deposited thin-films was performed with X-ray reflectometry at DTU Space and in the laboratory of the Physikalisch-Technische Bundesanstalt at the synchrotron radiation facility BESSY II.

Power spectrum analyses of nuclear decay rates

NASA Astrophysics Data System (ADS)

Javorsek, D.; Sturrock, P. A.; Lasenby, R. N.; Lasenby, A. N.; Buncher, J. B.; Fischbach, E.; Gruenwald, J. T.; Hoft, A. W.; Horan, T. J.; Jenkins, J. H.; Kerford, J. L.; Lee, R. H.; Longman, A.; Mattes, J. J.; Morreale, B. L.; Morris, D. B.; Mudry, R. N.; Newport, J. R.; O'Keefe, D.; Petrelli, M. A.; Silver, M. A.; Stewart, C. A.; Terry, B.

2010-10-01

We provide the results from a spectral analysis of nuclear decay data displaying annually varying periodic fluctuations. The analyzed data were obtained from three distinct data sets: 32Si and 36Cl decays reported by an experiment performed at the Brookhaven National Laboratory (BNL), 56Mn decay reported by the Children's Nutrition Research Center (CNRC), but also performed at BNL, and 226Ra decay reported by an experiment performed at the Physikalisch-Technische Bundesanstalt (PTB) in Germany. All three data sets exhibit the same primary frequency mode consisting of an annual period. Additional spectral comparisons of the data to local ambient temperature, atmospheric pressure, relative humidity, Earth-Sun distance, and their reciprocals were performed. No common phases were found between the factors investigated and those exhibited by the nuclear decay data. This suggests that either a combination of factors was responsible, or that, if it was a single factor, its effects on the decay rate experiments are not a direct synchronous modulation. We conclude that the annual periodicity in these data sets is a real effect, but that further study involving additional carefully controlled experiments will be needed to establish its origin.

New x-ray parallel beam facility XPBF 2.0 for the characterization of silicon pore optics

NASA Astrophysics Data System (ADS)

Krumrey, Michael; Müller, Peter; Cibik, Levent; Collon, Max; Barrière, Nicolas; Vacanti, Giuseppe; Bavdaz, Marcos; Wille, Eric

2016-07-01

A new X-ray parallel beam facility (XPBF 2.0) has been installed in the laboratory of the Physikalisch-Technische Bundesanstalt at the synchrotron radiation facility BESSY II in Berlin to characterize silicon pore optics (SPOs) for the future X-ray observatory ATHENA. As the existing XPBF which is operated since 2005, the new beamline provides a pencil beam of very low divergence, a vacuum chamber with a hexapod system for accurate positioning of the SPO to be investigated, and a vertically movable CCD-based camera system to register the direct and the reflected beam. In contrast to the existing beamline, a multilayer-coated toroidal mirror is used for beam monochromatization at 1.6 keV and collimation, enabling the use of beam sizes between about 100 μm and at least 5 mm. Thus the quality of individual pores as well as the focusing properties of large groups of pores can be investigated. The new beamline also features increased travel ranges for the hexapod to cope with larger SPOs and a sample to detector distance of 12 m corresponding to the envisaged focal length of ATHENA.

Microgravity collisions of dust aggregates as an analogue to early planetesimal formation

NASA Astrophysics Data System (ADS)

Whizin, Akbar; Blum, Jürgen; Colwell, Joshua

2014-11-01

During the early stages of planet formation the dusty progenitors of planetesimals collided with each other continuously to form the seeds of planets. These collisions could result in growth or disruption depending on the individual impact velocities. Based on input from solar nebula models a laboratory-based microgravity dust collision experiment was developed for a drop tower at the Technische Universität Braunschweig, Germany. We collided 1.0 - 1.6 mm SiO2 dust aggregates with clusters of these aggregates at a range of velocities and mass ratios to determine the thresholds between bouncing, sticking, and fragmentation. Presented here are the results of 264 microgravity collisions occurring at velocities of 1 - 160 cm/s with target-impactor mass ratios of 5:1 to 400:1. We also present the coefficient of restitutions for low-velocity collisions and we find the specific collision energy of fragmentation Q* for aggregates of this size. We find sticking occurs at mass ratios larger than 40:1, but only for low velocities ≤ 3 cm/s, clear boundaries exist for bouncing up to 30 cm/s, and fragmentation at ~50 cm/s and up, with total disruption occurring above 1 m/s.

Study of building typology of school constructed during the Dutch Colonial Period in Indonesia. Case study of Hoogere Burgerschool (HBS) in Bandung

NASA Astrophysics Data System (ADS)

Sarwo Wibowo, Arif

2018-03-01

Bandung is one of the most important colonial cities in Indonesia. In the early 20th century the capital city of Dutch East-Indies Government planned to move in Bandung. Critical infrastructures were intensively built during that period, such as streets and railways, houses, governmental buildings, train stations, hospitals and educational facilities. Besides the famous campus of Technische Hoogeschool te Bandoeng (ITB), still in the same period, several schools were also constructed. One of the most important schools was Hoogere Burgerschool in Bandung (HBS Bandung), now SMUN 3 and 5, Bandung designed by Charles Prosper Wolff Schoemaker and constructed in 1915. HBS Bandung was the fourth HBS constructed by Dutch East Indies Government, therefore became important and put itself as a reference for the later school buildings in Bandung. This study is analyzing how the architects’ frame of mind in producing this design works. Survey and direct data collecting were used to take the exact embodiment of building design. Usage and functional analysis were also used to match space and other standard used in a school building at that time. This study will give an understanding of building typology of school during the Dutch Colonial Period in Indonesia.

Final report on the key comparison CCM.P-K4.2012 in absolute pressure from 1 Pa to 10 kPa

NASA Astrophysics Data System (ADS)

Ricker, Jacob; Hendricks, Jay; Bock, Thomas; Dominik, Pražák; Kobata, Tokihiko; Torres, Jorge; Sadkovskaya, Irina

2017-01-01

The report summarizes the Consultative Committee for Mass (CCM) key comparison CCM.P-K4.2012 for absolute pressure spanning the range of 1 Pa to 10 000 Pa. The comparison was carried out at six National Metrology Institutes (NMIs), including National Institute of Standards and Technology (NIST), Physikalisch-Technische Bundesanstalt (PTB), Czech Metrology Institute (CMI), National Metrology Institute of Japan (NMIJ), Centro Nacional de Metrología (CENAM), and DI Mendeleyev Institute for Metrology (VNIIM). The comparison was made via a calibrated transfer standard measured at each of the NMIs facilities using their laboratory standard during the period May 2012 to September 2013. The transfer package constructed for this comparison preformed as designed and provided a stable artifact to compare laboratory standards. Overall the participants were found to be statistically equivalent to the key comparison reference value. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Self-triggering readout system for the neutron lifetime experiment PENeLOPE

NASA Astrophysics Data System (ADS)

Gaisbauer, D.; Bai, Y.; Konorov, I.; Paul, S.; Steffen, D.

2016-02-01

PENeLOPE is a neutron lifetime measurement developed at the Technische Universität München and located at the Forschungs-Neutronenquelle Heinz Maier-Leibnitz (FRM II) aiming to achieve a precision of 0.1 seconds. The detector for PENeLOPE consists of about 1250 Avalanche Photodiodes (APDs) with a total active area of 1225 cm2. The decay proton detector and electronics will be operated at a high electrostatic potential of -30 kV and a magnetic field of 0.6 T. This includes shaper, preamplifier, ADC and FPGA cards. In addition, the APDs will be cooled to 77 K. The 1250 APDs are divided into 14 groups of 96 channels, including spares. A 12-bit ADC digitizes the detector signals with 1 MSps. A firmware was developed for the detector including a self-triggering readout with continuous pedestal calculation and configurable signal detection. The data transmission and configuration is done via the Switched Enabling Protocol (SEP). It is a time-division multiplexing low layer protocol which provides determined latency for time critical messages, IPBus, and JTAG interfaces. The network has a n:1 topology, reducing the number of optical links.

Cross-scale MD simulations of dynamic strength of tantalum

NASA Astrophysics Data System (ADS)

Bulatov, Vasily

2017-06-01

Dislocations are ubiquitous in metals where their motion presents the dominant and often the only mode of plastic response to straining. Over the last 25 years computational prediction of plastic response in metals has relied on Discrete Dislocation Dynamics (DDD) as the most fundamental method to account for collective dynamics of moving dislocations. Here we present first direct atomistic MD simulations of dislocation-mediated plasticity that are sufficiently large and long to compute plasticity response of single crystal tantalum while tracing the underlying dynamics of dislocations in all atomistic details. Where feasible, direct MD simulations sidestep DDD altogether thus reducing uncertainties of strength predictions to those of the interatomic potential. In the specific context of shock-induced material dynamics, the same MD models predict when, under what conditions and how dislocations interact and compete with other fundamental mechanisms of dynamic response, e.g. twinning, phase-transformations, fracture. In collaboration with: Luis Zepeda-Ruiz, Lawrence Livermore National Laboratory; Alexander Stukowski, Technische Universitat Darmstadt; Tomas Oppelstrup, Lawrence Livermore National Laboratory. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

An increased frequency of patent foramen ovale in patients with transient global amnesia. Analysis of 53 consecutive patients.

PubMed

Klötzsch, C; Sliwka, U; Berlit, P; Noth, J

1996-06-01

Alerted by the number of patients with transient global amnesia (TGA) in whom Valsalvalike activities immediately preceded the onset of TGA, we have investigated the frequency of patent foramen ovale (PFO) as the prerequisite for paradoxical embolism. Case series with comparison to a control group. Hospitalized and ambulatory patients at the neurological departments of the Alfried Krupp Hospital, Essen, Germany, and the Rheinisch-Westfälische-Technische Hochschule, Aachen, Germany. Fifty-three consecutive patients with TGA were evaluated by the 2 centers between 1988 and 1995. Using contrast transcranial Doppler sonography we have observed a PFO in 55% of the patients with TGA, compared with 27% of a control group of 100 patients. This difference was statistically significant (P < .01). Twenty-five patients with TGA (47%), 15 of them with a proven PFO, reported a precipitating activity, such as the lifting of heavy weights, immediately before the TGA occurred. In addition to other pathological mechanisms, paradoxical embolism with temporobasal ischemia could possibly play a role in the clinical syndrome of TGA. This hypothesis could explain the frequent observation of preceding Valsalvalike activities in patients with TGA.

Organizational responses to a changing aid environment: the German Agency for Technical Cooperation (GTZ).

PubMed

Hill, Peter S

2002-01-01

As a major European donor, German government development assistance faces a series of challenges. Recent political changes have raised expectations for demonstrable health outcomes as a result of German development assistance; there has been a deepened commitment to collaboration with other bilateral and multilateral donors; and partner countries are increasingly open to new approaches to development. German development assistance also reflects a new ethos of partnership and the shift to programmatic and sector based development approaches. At the same time, its particular organizational structure and administrative framework highlight the extent of structural and systems reforms required of donors by changing development relationships, and the tensions created in responding to these. This paper examines organizational changes within the German Agency for Technical Cooperation (Deutsche Gesellschaft für Technische, Zusammenarbeit) (GTZ), aimed at increasing its Regional, Sectoral, Managerial and Process competence as they affect health and related sectors. These include the decentralization of GTZ, the trend to integration of projects, the increasing focus on policy and health systems reform, increased inter-sectoral collaboration, changes in recruitment and training, new perspectives in planning and evaluation and the introduction of a quality management programme.

Beta/gamma and alpha backgrounds in CRESST-II Phase 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strauss, R.; Angloher, G.; Ferreiro Iachellini, N.

2015-06-01

The experiment CRESST-II aims at the detection of dark matter with scintillating CaWO{sub 4} crystals operated as cryogenic detectors. Recent results on spin-independent WIMP-nucleon scattering from the CRESST-II Phase 2 allowed to probe a new region of parameter space for WIMP masses below 3 GeV/c{sup 2}. This sensitivity was achieved after background levels were reduced significantly. We present extensive background studies of a CaWO{sub 4} crystal, called TUM40, grown at the Technische Universität München. The average beta/gamma rate of 3.51/[kg keV day] (1-40 keV) and the total intrinsic alpha activity from natural decay chains of 3.08±0.04 mBq/kg are the lowestmore » reported for CaWO{sub 4} detectors. Contributions from cosmogenic activation, surface-alpha decays, external radiation and intrinsic alpha/beta emitters are investigated in detail. A Monte-Carlo based background decomposition allows to identify the origin of the majority of beta/gamma events in the energy region relevant for dark matter search.« less

Sanitary conditions in the Austrohungarian war harbour Pola (Pula, Croatia) in 1916-17: foundation of the Hygienic Institute.

PubMed

Alebić-Juretić, Ana

2017-12-01

Since 1850 the town of Pola (today Pula, Croatia) underwent big changes and growth due to its transformation into the principal military port of Austrian-Hungarian Empire. Besides the Admiralty that governed the naval actions, the harbor was supported by different organizations needed for normal functioning of the harbor. One of this organizations was Naval Technical Committee (Marine Technisches Komitee), founded in 1874 with the purpose of solving the technical and technological issues related to the navy. The outbreak of World War I (WWI) posed new challenges for Europe. Thus, on February 29th 1916, the Hygienic Institute was founded in the harbor area and Dr. Karl Cafasso was appointed as the first director. The purpose of the Institute was to provide scientific and professional aid to the Head of the Medical Corps of the Ports' Board (Kriegs-Hafenkommando) in the field of epidemiology, microbiology, social medicine and hygiene, the main fields of public health even today. By the end of the war, the Institute ceased its activity, and similar was founded only in 1938, under Italian rule and has been developed to the present Institute of Public Health.

Qualitätsmanagement in molekularbiologischen Laboratorien

NASA Astrophysics Data System (ADS)

Schulze, Manuela

Jedes Laboratorium führt Untersuchungen nach bestem Wissen und Gewissen durch, und jeder Analytiker weiß von sich, dass er/sie gute Arbeit macht. Trotzdem können Analysen des gleichen Probenmaterials in verschiedenen Laboren zu unterschiedlichen Ergebnissen führen. Sofern es sich dabei nicht um Untersuchungen im Bereich der Nachweisgrenze und damit letztlich um statistisch bedingte Unterschiede oder Inhomogenitäten im Probenmaterial handelt, trägt dies nicht zur Vertrauenswürdigkeit von analytischen Untersuchungsergebnissen bei. Mit der zunehmenden Globalisierung der Märkte rückt die gegenseitige Anerkennung von analytischen Resultaten immer stärker in den Vordergrund. Die Vergleichbarkeit von Laborresultaten wird erleichtert, wenn sich die Laboratorien auf die gleichen Richtlinien zur Vorgehensweise und Handhabung ihrer Arbeiten verständigen. Im Bereich der Laboruntersuchungen von Lebensmitteln, Futtermitteln und Saatgut ist als derartige Rischt-Schnur die EN ISO/IEC 17025 [1] anerkannt. Diese Norm enthält alle Anforderungen, die Prüflaboratorien erfüllen müssen, wenn sie nachweisen wollen, dass sie ein Qualitätsmanagementsystem betreiben, technisch (meint: fachlich) kompetent und fähig sind, fachlich fundierte Ergebnisse zu erzielen.

Process spectroscopy in microemulsions—Raman spectroscopy for online monitoring of a homogeneous hydroformylation process

NASA Astrophysics Data System (ADS)

Paul, Andrea; Meyer, Klas; Ruiken, Jan-Paul; Illner, Markus; Müller, David-Nicolas; Esche, Erik; Wozny, Günther; Westad, Frank; Maiwald, Michael

2017-03-01

A major industrial reaction based on homogeneous catalysis is hydroformylation for the production of aldehydes from alkenes and syngas. Hydroformylation in microemulsions, which is currently under investigation at Technische Universität Berlin on a mini-plant scale, was identified as a cost efficient approach which also enhances product selectivity. Herein, we present the application of online Raman spectroscopy on the reaction of 1-dodecene to 1-tridecanal within a microemulsion. To achieve a good representation of the operation range in the mini-plant with regard to concentrations of the reactants a design of experiments was used. Based on initial Raman spectra partial least squares regression (PLSR) models were calibrated for the prediction of 1-dodecene and 1-tridecanal. Limits of predictions arise from nonlinear correlations between Raman intensity and mass fractions of compounds in the microemulsion system. Furthermore, the prediction power of PLSR models becomes limited due to unexpected by-product formation. Application of the lab-scale derived calibration spectra and PLSR models on online spectra from a mini-plant operation yielded promising estimations of 1-tridecanal and acceptable predictions of 1-dodecene mass fractions suggesting Raman spectroscopy as a suitable technique for process analytics in microemulsions.

Report of pilot study CCM.P-P1 for international comparison of absolute pressure measurements in gas from 3 × 10-9 Pa to 9 × 10-4 Pa

NASA Astrophysics Data System (ADS)

Yoshida, Hajime; Arai, Kenta; Komatsu, Eiichi; Fujii, Kenichi; Bock, Thomas; Jousten, Karl

2015-01-01

A bilateral comparison of absolute gas pressure measurements from 3 × 10-9 Pa to 9 × 10-4 Pa was performed between the National Metrology Institute of Japan (NMIJ) and Physikalisch-Technische Bundesanstalt (PTB). It is a pilot study CCM.P-P1 for the next international comparison in this pressure range to test the stability of ultrahigh vacuum gauges (UHV gauges) as transfer standards. Two spinning rotor gauges (SRGs), an axial-symmetric transmission gauge (ATG), and an extractor gauge (EXG) were used as transfer standards. The calibration ratio of one SRG was sufficiently stable, but the other was not. This result indicates that improvements in the transport mechanism for SRG are needed. The two ionization gauges ATG and EXG, on the other hand, were sufficiently stable. Provisional equivalence of the pressures realized by the primary standards at NMIJ and PTB was found. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by CCM-WGS.

ECG compression using non-recursive wavelet transform with quality control

NASA Astrophysics Data System (ADS)

Liu, Je-Hung; Hung, King-Chu; Wu, Tsung-Ching

2016-09-01

While wavelet-based electrocardiogram (ECG) data compression using scalar quantisation (SQ) yields excellent compression performance, a wavelet's SQ scheme, however, must select a set of multilevel quantisers for each quantisation process. As a result of the properties of multiple-to-one mapping, however, this scheme is not conducive for reconstruction error control. In order to address this problem, this paper presents a single-variable control SQ scheme able to guarantee the reconstruction quality of wavelet-based ECG data compression. Based on the reversible round-off non-recursive discrete periodised wavelet transform (RRO-NRDPWT), the SQ scheme is derived with a three-stage design process that first uses genetic algorithm (GA) for high compression ratio (CR), followed by a quadratic curve fitting for linear distortion control, and the third uses a fuzzy decision-making for minimising data dependency effect and selecting the optimal SQ. The two databases, Physikalisch-Technische Bundesanstalt (PTB) and Massachusetts Institute of Technology (MIT) arrhythmia, are used to evaluate quality control performance. Experimental results show that the design method guarantees a high compression performance SQ scheme with statistically linear distortion. This property can be independent of training data and can facilitate rapid error control.

Experimental Verification of the Individual Energy Dependencies of the Partial L-Shell Photoionization Cross Sections of Pd and Mo

NASA Astrophysics Data System (ADS)

Hönicke, Philipp; Kolbe, Michael; Müller, Matthias; Mantler, Michael; Krämer, Markus; Beckhoff, Burkhard

2014-10-01

An experimental method for the verification of the individually different energy dependencies of L1-, L2-, and L3- subshell photoionization cross sections is described. The results obtained for Pd and Mo are well in line with theory regarding both energy dependency and absolute values, and confirm the theoretically calculated cross sections by Scofield from the early 1970 s and, partially, more recent data by Trzhaskovskaya, Nefedov, and Yarzhemsky. The data also demonstrate the questionability of quantitative x-ray spectroscopical results based on the widely used fixed jump ratio approximated cross sections with energy independent ratios. The experiments are carried out by employing the radiometrically calibrated instrumentation of the Physikalisch-Technische Bundesanstalt at the electron storage ring BESSY II in Berlin; the obtained fluorescent intensities are thereby calibrated at an absolute level in reference to the International System of Units. Experimentally determined fixed fluorescence line ratios for each subshell are used for a reliable deconvolution of overlapping fluorescence lines. The relevant fundamental parameters of Mo and Pd are also determined experimentally in order to calculate the subshell photoionization cross sections independently of any database.

Analysis of gamma radiation from a radon source: Indications of a solar influence

NASA Astrophysics Data System (ADS)

Sturrock, P. A.; Steinitz, G.; Fischbach, E.; Javorsek, D.; Jenkins, J. H.

2012-08-01

This article presents an analysis of about 29,000 measurements of gamma radiation associated with the decay of radon in a sealed container at the Geological Survey of Israel (GSI) Laboratory in Jerusalem between 28 January 2007 and 10 May 2010. These measurements exhibit strong variations in time of year and time of day, which may be due in part to environmental influences. However, time-series analysis reveals a number of periodicities, including two at approximately 11.2 year-1 and 12.5 year-1. We have previously found these oscillations in nuclear-decay data acquired at the Brookhaven National Laboratory and at the Physiklisch-Technische Bundesanstalt, and we have suggested that these oscillations are attributable to some form of solar radiation that has its origin in the deep solar interior. A curious property of the GSI data is that the annual oscillation is much stronger in daytime data than in nighttime data, but the opposite is true for all other oscillations. This may be a systematic effect but, if it is not, this property should help narrow the theoretical options for the mechanism responsible for decay-rate variability.

Dynamic system simulation of small satellite projects

NASA Astrophysics Data System (ADS)

Raif, Matthias; Walter, Ulrich; Bouwmeester, Jasper

2010-11-01

A prerequisite to accomplish a system simulation is to have a system model holding all necessary project information in a centralized repository that can be accessed and edited by all parties involved. At the Institute of Astronautics of the Technische Universitaet Muenchen a modular approach for modeling and dynamic simulation of satellite systems has been developed called dynamic system simulation (DySyS). DySyS is based on the platform independent description language SysML to model a small satellite project with respect to the system composition and dynamic behavior. A library of specific building blocks and possible relations between these blocks have been developed. From this library a system model of the satellite of interest can be created. A mapping into a C++ simulation allows the creation of an executable system model with which simulations are performed to observe the dynamic behavior of the satellite. In this paper DySyS is used to model and simulate the dynamic behavior of small satellites, because small satellite projects can act as a precursor to demonstrate the feasibility of a system model since they are less complex compared to a large scale satellite project.

ZERODUR TAILORED for cryogenic application

NASA Astrophysics Data System (ADS)

Jedamzik, R.; Westerhoff, T.

2014-07-01

ZERODUR® glass ceramic from SCHOTT is known for its very low thermal expansion coefficient (CTE) at room temperature and its excellent CTE homogeneity. It is widely used for ground-based astronomical mirrors but also for satellite applications. Many reference application demonstrate the excellent and long lasting performance of ZERODUR® components in orbit. For space application a low CTE of the mirror material is required at cryogenic temperatures together with a good match of the thermal expansion to the supporting structure material. It is possible to optimize the coefficient of thermal expansion of ZERODUR® for cryogenic applications. This paper reports on measurements of thermal expansion of ZERODUR® down to cryogenic temperatures of 10 K performed by the PTB (Physikalisch Technische Bundesanstallt, Braunschweig, Germany, the national metrology laboratory). The ZERODUR® TAILORED CRYO presented in this paper has a very low coefficient of thermal expansion down to 70 K. The maximum absolute integrated thermal expansion down to 10 K is only about 20 ppm. Mirror blanks made from ZERODUR® TAILORED CRYO can be light weighted to almost 90% with our modern processing technologies. With ZERODUR® TAILORED CRYO, SCHOTT offers the mirror blank material for the next generation of space telescope applications.

Modification of a compressor performance test bench for liquid slugging observation in refrigeration compressors

NASA Astrophysics Data System (ADS)

Ola, Max; Thomas, Christiane; Hesse, Ullrich

2017-08-01

Compressor performance test procedures are defined by the standard DIN EN 13771, wherein a variety of possible calorimeter and flow rate measurement methods are suggested. One option is the selection of two independent measurement methods. The accuracies of both selected measurement methods are essential. The second option requires only one method. However the measurement accuracy of the used device has to be verified and recalibrated on a regular basis. The compressor performance test facility at the Technische Universitaet Dresden uses a calibrated flow measurement sensor, a hot gas bypass and a mixed flow heat exchanger. The test bench can easily be modified for tests of various compressor types at different operating ranges and with various refrigerants. In addition, the modified test setup enables the investigation of long term liquid slug and its effects on the compressor. The modification comprises observational components, adjustments of the control system, safety measures and a customized oil recirculation system for compressors which do not contain an integrated oil sump or oil level regulation system. This paper describes the setup of the test bench, its functional principle, the key modifications, first test results and an evaluation of the energy balance.

Conference report "Stoffwechsel. Histories of metabolism", workshop organized by Mathias Grote at Technische Universität Berlin, November 28-29th, 2014.

PubMed

Grote, Mathias; Keuck, Lara

2015-06-01

Historical analyses of what metabolism has been conceived of, how concepts of metabolism were related to disciplines such as nineteenth-century nutritional physiology or twentieth-century biochemistry, and how their genealogies relate to the current developments may be helpful to understand the various, at times polemic, ways in which the boundaries between metabolism and heredity have been re-drawn. Against this background, a small number of scholars gathered in Berlin for a workshop that equally aimed at bringing new stories to the fore, and at considering seemingly known ones in a new light. Some aspects of the discussions are summarized in this paper.

Proceedings of IEEE International Conference on Nanotechnology (4th) held at the Technische Universitat Muenchen, Munich, Germany on 17-19 Aug 2004.

DTIC Science & Technology

2004-08-01

Medizinische Elektronik, TU München, Munich, Germany) 16.25-16-45 TH_SP_6 Drug delivery for nerve tissue regeneration POSTER II POSTER I ORAL SESSIONS MAIN...Carolina 29208, USA) WE-P8 Effects of Synthesis Conditions on the Growth of MWCNTs Using an Ultra Sonic Evaporator with Pyrolysis of Hydrocarbon... regeneration , F. C. Soumetz1, M. Giacomini1, L. Pastorino1, J. B. Phillips2, R. A. Brown2, C. Ruggiero1, (1D.I.S.T, University of Genova, Via Opera

List of Participants

NASA Astrophysics Data System (ADS)

2007-11-01

Mohab Abou ZeidVrije Universiteit, Brussel Joke AdamKatholieke Universiteit Leuven Nikolas AkerblomMax-Planck-Institut für Physik, München Luis Fernando Alday Utrecht University Stelios Alexandris University of Patras Antonio Amariti Università di Milano-Bicocca Nicola Ambrosetti Université de Neuchâtel Pascal Anastasopoulos Università di Roma Tor Vergata Laura Andrianopoli Enrico Fermi Center Carlo Angelantonj Università di Torino Lilia Anguelova Queen Mary, University of London Daniel AreanUniversidade de Santiago de Compostela Gleb ArutyunovUtrecht University Spyros Avramis NTU Athens—University of Patras Ioannis Bakas University of Patras Subrata Bal Dublin Institute for Advanced Studies Igor Bandos Valencia University Jessica Barrett University of Iceland Marco Baumgartl Eidgenössische Technische Hochschule, Zürich Jacopo Bechi Università di Firenze James Bedford Queen Mary, University of London Jorge Bellorin Universidad Autonoma de Madrid Francesco Benini SISSA, Trieste Eric Bergshoeff Centre for Theoretical Physics, University of Groningen Gaetano BertoldiUniversity of Wales, Swansea Adel Bilal Laboratoire de Physique Théorique, École Normale Superieure, Paris Matthias Blau Université de Neuchâtel Johannes BroedelUniversität Hannover Felix Brümmer Universität Heidelberg Julio Cesar Bueno de Andrade São Paulo State University—UNESP Cliff Burgess McMaster University Agostino Butti Laboratoire de Physique Théorique, École Normale Superieure, Paris Marco Caldarelli Universitat de Barcelona Pablo G Camara Centre de Physique Théorique, École Polytechnique, Palaiseau Joan Camps Universitat de Barcelona Felipe Canoura FernandezUniversidade de Santiago de Compostela Luigi Cappiello Università di Napoli Federico II Luca Carlevaro École Polytechnique, Palaiseau Roberto Casero Centre de Physique Théorique, École Polytechnique, Palaiseau Claudio Caviezel Max-Planck-Institut für Physik, München Alessio Celi Universitat de Barcelona Anna

Gesellschaft fuer angewandte Mathematik und Mechanik, Annual Scientific Meeting, Technische Universitaet Berlin, Berlin, West Germany, April 8-11, 1980, Reports. Parts 1 & 2

NASA Astrophysics Data System (ADS)

1981-04-01

The main topics discussed were related to nonparametric statistics, plane and antiplane states in finite elasticity, free-boundary-variational inequalities, the numerical solution of free boundary-value problems, discrete and combinatorial optimization, mathematical modelling in fluid mechanics, a survey and comparison regarding thermodynamic theories, invariant and almost invariant subspaces in linear systems with applications to disturbance isolation, nonlinear acoustics, and methods of function theory in the case of partial differential equations, giving particular attention to elliptic problems in the plane.

Shock tubes and waves; Proceedings of the Sixteenth International Symposium, Rheinisch-Westfaelische Technische Hochschule, Aachen, Federal Republic of Germany, July 26-31, 1987

NASA Astrophysics Data System (ADS)

Groenig, Hans

Topics discussed in this volume include shock wave structure, propagation, and interaction; shocks in condensed matter, dusty gases, and multiphase media; chemical processes and related combustion and detonation phenomena; shock wave reflection, diffraction, and focusing; computational fluid dynamic code development and shock wave application; blast and detonation waves; advanced shock tube technology and measuring technique; and shock wave applications. Papers are presented on dust explosions, the dynamics of shock waves in certain dense gases, studies of condensation kinetics behind incident shock waves, the autoignition mechanism of n-butane behind a reflected shock wave, and a numerical simulation of the focusing process of reflected shock waves. Attention is also given to the equilibrium shock tube flow of real gases, blast waves generated by planar detonations, modern diagnostic methods for high-speed flows, and interaction between induced waves and electric discharge in a very high repetition rate excimer laser.

Angle comparison using an autocollimator

NASA Astrophysics Data System (ADS)

Geckeler, Ralf D.; Just, Andreas; Vasilev, Valentin; Prieto, Emilio; Dvorácek, František; Zelenika, Slobodan; Przybylska, Joanna; Duta, Alexandru; Victorov, Ilya; Pisani, Marco; Saraiva, Fernanda; Salgado, Jose-Antonio; Gao, Sitian; Anusorn, Tonmueanwai; Leng Tan, Siew; Cox, Peter; Watanabe, Tsukasa; Lewis, Andrew; Chaudhary, K. P.; Thalmann, Ruedi; Banreti, Edit; Nurul, Alfiyati; Fira, Roman; Yandayan, Tanfer; Chekirda, Konstantin; Bergmans, Rob; Lassila, Antti

2018-01-01

Autocollimators are versatile optical devices for the contactless measurement of the tilt angles of reflecting surfaces. An international key comparison (KC) on autocollimator calibration, EURAMET.L-K3.2009, was initiated by the European Association of National Metrology Institutes (EURAMET) to provide information on the capabilities in this field. The Physikalisch-Technische Bundesanstalt (PTB) acted as the pilot laboratory, with a total of 25 international participants from EURAMET and from the Asia Pacific Metrology Programme (APMP) providing measurements. This KC was the first one to utilise a high-resolution electronic autocollimator as a standard. In contrast to KCs in angle metrology which usually involve the full plane angle, it focused on relatively small angular ranges (+/-10 arcsec and +/-1000 arcsec) and step sizes (10 arcsec and 0.1 arcsec, respectively). This document represents the approved final report on the results of the KC. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCL, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Process spectroscopy in microemulsions—setup and multi-spectral approach for reaction monitoring of a homogeneous hydroformylation process

NASA Astrophysics Data System (ADS)

Meyer, K.; Ruiken, J.-P.; Illner, M.; Paul, A.; Müller, D.; Esche, E.; Wozny, G.; Maiwald, M.

2017-03-01

Reaction monitoring in disperse systems, such as emulsions, is of significant technical importance in various disciplines like biotechnological engineering, chemical industry, food science, and a growing number other technical fields. These systems pose several challenges when it comes to process analytics, such as heterogeneity of mixtures, changes in optical behavior, and low optical activity. Concerning this, online nuclear magnetic resonance (NMR) spectroscopy is a powerful technique for process monitoring in complex reaction mixtures due to its unique direct comparison abilities, while at the same time being non-invasive and independent of optical properties of the sample. In this study the applicability of online-spectroscopic methods on the homogeneously catalyzed hydroformylation system of 1-dodecene to tridecanal is investigated, which is operated in a mini-plant scale at Technische Universität Berlin. The design of a laboratory setup for process-like calibration experiments is presented, including a 500 MHz online NMR spectrometer, a benchtop NMR device with 43 MHz proton frequency as well as two Raman probes and a flow cell assembly for an ultraviolet and visible light (UV/VIS) spectrometer. Results of high-resolution online NMR spectroscopy are shown and technical as well as process-specific problems observed during the measurements are discussed.

Influence of ionospheric disturbances onto long-baseline relative positioning in kinematic mode

NASA Astrophysics Data System (ADS)

Wezka, Kinga; Herrera, Ivan; Cokrlic, Marija; Galas, Roman

2013-04-01

Ionospheric disturbances are fast and random variabilities in the ionosphere and they are difficult to detect and model. Some strong disturbances can cause, among others, interruption of GNSS signal or even lead to loss of signal lock. These phenomena are especially harmful for kinematic real-time applications, where the system availability is one of the most important parameters influencing positioning reliability. Our investigations were conducted using long time series of GNSS observations gathered at high latitude, where ionospheric disturbances more frequently occur. Selected processing strategy was used to monitor ionospheric signatures in time series of the coordinates. Quality of the data of input and of the processing results were examined and described by a set of proposed parameters. Variations in the coordinates were compared with available information about the state of ionosphere derived from Neustrelitz TEC Model (NTCM) and with the time series of raw observations. Some selected parameters were also calculated with the "iono-tools" module of the TUB-NavSolutions software developed by the Precise Navigation and Positioning Group at Technische Universitaet Berlin. The paper presents very first results of evaluation of the robustness of positioning algorithms with respect to ionospheric anomalies using the NTCM model and our calculated ionospheric parameters.

Surviving the Glut: The Management of Event Streams in Cyberphysical Systems

NASA Astrophysics Data System (ADS)

Buchmann, Alejandro

Alejandro Buchmann is Professor in the Department of Computer Science, Technische Universität Darmstadt, where he heads the Databases and Distributed Systems Group. He received his MS (1977) and PhD (1980) from the University of Texas at Austin. He was an Assistant/Associate Professor at the Institute for Applied Mathematics and Systems IIMAS/UNAM in Mexico, doing research on databases for CAD, geographic information systems, and objectoriented databases. At Computer Corporation of America (later Xerox Advanced Information Systems) in Cambridge, Mass., he worked in the areas of active databases and real-time databases, and at GTE Laboratories, Waltham, in the areas of distributed object systems and the integration of heterogeneous legacy systems. 1991 he returned to academia and joined T.U. Darmstadt. His current research interests are at the intersection of middleware, databases, eventbased distributed systems, ubiquitous computing, and very large distributed systems (P2P, WSN). Much of the current research is concerned with guaranteeing quality of service and reliability properties in these systems, for example, scalability, performance, transactional behaviour, consistency, and end-to-end security. Many research projects imply collaboration with industry and cover a broad spectrum of application domains. Further information can be found at http://www.dvs.tu-darmstadt.de

Time-resolved fast-neutron radiography of air-water two-phase flows in a rectangular channel by an improved detection system

NASA Astrophysics Data System (ADS)

Zboray, Robert; Dangendorf, Volker; Mor, Ilan; Bromberger, Benjamin; Tittelmeier, Kai

2015-07-01

In a previous work, we have demonstrated the feasibility of high-frame-rate, fast-neutron radiography of generic air-water two-phase flows in a 1.5 cm thick, rectangular flow channel. The experiments have been carried out at the high-intensity, white-beam facility of the Physikalisch-Technische Bundesanstalt, Germany, using an multi-frame, time-resolved detector developed for fast neutron resonance radiography. The results were however not fully optimal and therefore we have decided to modify the detector and optimize it for the given application, which is described in the present work. Furthermore, we managed to improve the image post-processing methodology and the noise suppression. Using the tailored detector and the improved post-processing, significant increase in the image quality and an order of magnitude lower exposure times, down to 3.33 ms, have been achieved with minimized motion artifacts. Similar to the previous study, different two-phase flow regimes such as bubbly slug and churn flows have been examined. The enhanced imaging quality enables an improved prediction of two-phase flow parameters like the instantaneous volumetric gas fraction, bubble size, and bubble velocities. Instantaneous velocity fields around the gas enclosures can also be more robustly predicted using optical flow methods as previously.

Transferring experience labs for production engineering students to universities in newly industrialized countries

NASA Astrophysics Data System (ADS)

Leiden, A.; Posselt, G.; Bhakar, V.; Singh, R.; Sangwan, K. S.; Herrmann, C.

2018-01-01

The Indian economy is one of the fastest growing economies in the world and the demand for the skilled engineers is increasing. Subsequently the Indian education sector is growing to provide the necessary number of skilled engineers. Current Indian engineering graduates have broad theoretical background but lack in methodological, soft and practical skills. To bridge this gap, the experience lab ideas from the engineering education at “Die Lernfabrik” (learning factory) of the Technische Universität Braunschweig (TU Braunschweig) is transferred to the Birla Institute of Technology and Science in Pilani (BITS Pilani), India. This Lernfabrik successfully strengthened the methodological, soft and practical skills of the TU Braunschweig production-engineering graduates. The target group is discrete manufacturing education with focusing on energy and resource efficiency as well as cyber physical production systems. As the requirements of industry and academia in India differs from Germany, the transfer of the experience lab to the Indian education system needs special attention to realize a successful transfer project. This publication provides a unique approach to systematically transfer the educational concept in Learning Factory from a specific university environment to a different environment in a newly industrialized country. The help of a bilateral university driven practice partnership between the two universities creates a lighthouse for the Indian university environment.

Block sparsity-based joint compressed sensing recovery of multi-channel ECG signals.

PubMed

Singh, Anurag; Dandapat, Samarendra

2017-04-01

In recent years, compressed sensing (CS) has emerged as an effective alternative to conventional wavelet based data compression techniques. This is due to its simple and energy-efficient data reduction procedure, which makes it suitable for resource-constrained wireless body area network (WBAN)-enabled electrocardiogram (ECG) telemonitoring applications. Both spatial and temporal correlations exist simultaneously in multi-channel ECG (MECG) signals. Exploitation of both types of correlations is very important in CS-based ECG telemonitoring systems for better performance. However, most of the existing CS-based works exploit either of the correlations, which results in a suboptimal performance. In this work, within a CS framework, the authors propose to exploit both types of correlations simultaneously using a sparse Bayesian learning-based approach. A spatiotemporal sparse model is employed for joint compression/reconstruction of MECG signals. Discrete wavelets transform domain block sparsity of MECG signals is exploited for simultaneous reconstruction of all the channels. Performance evaluations using Physikalisch-Technische Bundesanstalt MECG diagnostic database show a significant gain in the diagnostic reconstruction quality of the MECG signals compared with the state-of-the art techniques at reduced number of measurements. Low measurement requirement may lead to significant savings in the energy-cost of the existing CS-based WBAN systems.

A multichannel decision-level fusion method for T wave alternans detection

NASA Astrophysics Data System (ADS)

Ye, Changrong; Zeng, Xiaoping; Li, Guojun; Shi, Chenyuan; Jian, Xin; Zhou, Xichuan

2017-09-01

Sudden cardiac death (SCD) is one of the most prominent causes of death among patients with cardiac diseases. Since ventricular arrhythmia is the main cause of SCD and it can be predicted by T wave alternans (TWA), the detection of TWA in the body-surface electrocardiograph (ECG) plays an important role in the prevention of SCD. But due to the multi-source nature of TWA, the nonlinear propagation through thorax, and the effects of the strong noises, the information from different channels is uncertain and competitive with each other. As a result, the single-channel decision is one-sided while the multichannel decision is difficult to reach a consensus on. In this paper, a novel multichannel decision-level fusion method based on the Dezert-Smarandache Theory is proposed to address this issue. Due to the redistribution mechanism for highly competitive information, higher detection accuracy and robustness are achieved. It also shows promise to low-cost instruments and portable applications by reducing demands for the synchronous sampling. Experiments on the real records from the Physikalisch-Technische Bundesanstalt diagnostic ECG database indicate that the performance of the proposed method improves by 12%-20% compared with the one-dimensional decision method based on the periodic component analysis.

Concepts for VLBI Station Control as Part of NEXPReS

NASA Astrophysics Data System (ADS)

Ettl, M.; Neidhardt, A.; Schönberger, M.; Alef, W.; Himwich, E.; Beaudoin, C.; Plötz, C.; Lovell, J.; Hase, H.

2012-12-01

In the Novel EXploration Pushing Robust e-VLBI Services-project (NEXPReS) the Technische Universität München (TUM) realizes concepts for continuous quality monitoring and station remote control in cooperation with the Max-Planck-Institute for Radio Astronomy, Bonn. NEXPReS is a three-year project, funded within the European Seventh Framework program. It is aimed to develop e-VLBI services for the European VLBI Network (EVN), which can also support the IVS observations (VLBI2010). Within this project, the TUM focuses on developments of an operational remote control system (e-RemoteCtrl) with authentication and authorization. It includes an appropriate role management with different remote access states for future observation strategies. To allow a flexible control of different systems in parallel, sophisticated graphical user interfaces are designed and realized. The software is currently under test in the new AuScope network, Australia/New Zealand. Additional system parameters and information are collected with a new system monitoring (SysMon) for a higher degree of automation, which is currently under preparation for standardization within the IVS Monitoring and Control Infrastructure (MCI) Collaboration Group. The whole system for monitoring and control is fully compatible with the NASA Field System and extends it.

Kompressionstherapie bei Patienten mit Ulcus cruris venosum.

PubMed

Dissemond, Joachim; Assenheimer, Bernd; Bültemann, Anke; Gerber, Veronika; Gretener, Silvia; Kohler-von Siebenthal, Elisabeth; Koller, Sonja; Kröger, Knut; Kurz, Peter; Läuchli, Severin; Münter, Christian; Panfil, Eva-Maria; Probst, Sebastian; Protz, Kerstin; Riepe, Gunnar; Strohal, Robert; Traber, Jürg; Partsch, Hugo

2016-11-01

Wund-D.A.CH. ist der Dachverband deutschsprachiger Fachgesellschaften, die sich mit den Thematiken der Wundbehandlung beschäftigen. Experten verschiedener Fachgesellschaften aus Deutschland, Österreich und der Schweiz haben nun einen aktuellen Konsens der Kompressionstherapie für Patienten mit Ulcus cruris venosum erstellt. In Europa ist das Ulcus cruris venosum eine der häufigsten Ursachen für chronische Wunden. Neben der konservativen und interventionellen Wund- und Venentherapie, ist die Kompressionstherapie die Basis der Behandlungsstrategien. Die Kompressionstherapie kann heute mit sehr unterschiedlichen Materialien und Systemen durchgeführt werden. Während in der Entstauungsphase insbesondere Verbände mit Kurzzugbinden oder Mehrkomponentensysteme zur Anwendung kommen, sind es anschließend überwiegend Ulkus-Strumpfsysteme. Eine weitere, bislang wenig verbreitete Alternative sind adaptive Kompressionsbandagen. Insbesondere für die Rezidivprophylaxe werden medizinische Kompressionsstrümpfe empfohlen. Durch die Vielzahl der heute zur Verfügung stehenden Behandlungsoptionen, kann für nahezu alle Patienten ein Konzept entwickelt werden, dass sich an den individuellen Bedürfnissen und Fähigkeiten orientiert und daher auch akzeptiert und durchgeführt wird. Die Kompressionstherapie ist für die Behandlung von Patienten mit Ulcus cruris venosum essentiell. In den letzten Jahren sind viele verschiedene Therapieoptionen verfügbar, die in den deutschsprachigen Ländern unterschiedlich angewendet oder durchgeführt werden. Daher soll dieser Expertenkonsens dazu beitragen, konkrete Empfehlungen für die praktische Durchführung der Kompressionstherapie von Patienten mit Ulcus cruris venosum darzustellen. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

PREFACE: The International Conference on Highly Frustrated Magnetism HFM2008

NASA Astrophysics Data System (ADS)

Eremin, Ilya; Brenig, Wolfram; Kremer, Reinhard; Litterst, Jochen

2009-01-01

The International Conference on Highly Frustrated Magnetism 2008 (HFM2008) took place on 7-12 September 2008 at the Technische Universität Carolo-Wilhelmina zu Braunschweig, Germany. This conference was the fourth event in a series of meetings, which started in Waterloo, Canada (HFM 2000), followed by the second one in Grenoble, France (HFM 2003), and the third meeting in Osaka, Japan (HFM 2006). HFM2008 attracted more than 220 participants from all over the world. The number of participants of the HFM conference series has been increasing steadily, from about 80 participants at HFM 2000, to 120 participants at HFM 2003, and 190 participants at HFM 2006, demonstrating that highly frustrated magnetism remains a rapidly growing area of research in condensed matter physics. At the end of HFM2008 it was decided that the next International Conference on Highly Frustrated Magnetism will be held in Baltimore, USA in 2010. HFM2008 saw four plenary talks by R Moessner, S Nakatsuji, S-W Cheong, and S Sachdev, 18 invited presentations, 30 contributed talks and about 160 poster presentations from all areas of frustrated magnetism. The subjects covered by the conference included: Kagome systems Itinerant frustrated systems Spinels and pyrochlore materials Triangular systems Unconventional order and spin liquids Chain systems Chain systems Novel frustrated systems This volume of Journal of Physics: Conference Series contains the proceedings of HFM2008 with 83 papers that provide a scientific record of the scientific topics covered by the conference. All articles have been refereed by experts in the field. It is our hope that the reader will enjoy and profit from the HFM2008 Proceedings. Ilya Eremin Proceedings Editor Wolfram Brenig, Reinhard Kremer, and Jochen Litterst Co-Editors International Advisory Board L Balents (USA) F Becca (Italy) S Bramwell (UK) P Fulde (Germany) B D Gaulin (Canada) J E Greedan (Canada) A Harrison (France) Z Hiroi (Japan) H Kawamura (Japan) A Keren

Recent work of decay spectroscopy at RIBF

NASA Astrophysics Data System (ADS)

Söderström, Pär-Anders

2014-09-01

β- and isomer-decay spectroscopy are sensitive probes of nuclear structure, and are often the only techniques capable of providing data for exotic nuclei that are producted with very low rates. Decay properties of exotic nuclei are also essential to model astrophysical events responible for the evolution of the universe such as the rp- and r-process. The EURICA project (EUROBALL RIKEN Cluster Array) has been launched in 2012 with the goal of performing spectroscopy of very exotic nuclei. Since 2012, four experimental campaigns have been successfully completed using fragmentation of 124Xe beam and in-flight-fission of 238U beam, approaching for example the key nuclei 78Ni, 110Zr, 100Sn, 128Pd, and 138Sn. This contribution highlights the experiments performed, results obtained, and discusses the future perspective of the EURICA project. In collaboration with Shunji Nishimura, Hidetada Baba, RIKEN Nishina Center; Frank Browne, Brighton University; Pieter Doornenbal, RIKEN Nishina Center; Guillaume Gey, Universite Joseph Fourier Grenoble; Tadaaki Isobe and Giuseppe Lorusso, RIKEN Nishina Center; Daniel Lubos, Technische Universitat Munchen; Kevin Mochner, University of Cologne; Zena Patel and Simon Rice, University of Surrey; Hiroyoshi Sakurai, RIKEN Nishina Center; Laura Sinclair, University of York; Toshiyuki Sumikama, Tohoku University; Jan Taprogge, Universidad Autonoma de Madrid; Zsolt Vajta, MTA Atomki; Hiroshi Watanabe, Beihang University; Jin Wu, Peking University; and Zhengyu Xu, University of Tokyo.

Final report on bilateral supplementary comparison APMP.M.P-S5 in hydraulic gauge pressure from 1 MPa to 10 MPa

NASA Astrophysics Data System (ADS)

Yue, J.; Yang, Y.; Sabuga, W.

2016-01-01

This report summarizes the results of the Asia-Pacific Metrology Programme (APMP) supplementary comparison APMP.M.P-S5 for hydraulic gauge pressure in the range of 1 MPa to 10 MPa, which is a bilateral comparison carried out at the National Institute of Metrology, China (NIM) and the Physikalisch-Technische Bundesanstalt, Germany (PTB) during the period June 2014 to June 2015. NIM piloted the comparison and provided the transfer standard, which was a piston-cylinder assembly (PCA) of 1 cm2 nominal effective area built in a hydraulic pressure balance manufactured by Fluke Corporation. The laboratory standards of NIM and PTB are both hydraulic pressure balances equipped with PCAs, of which the nominal effective area is 1 cm2 for NIM and 5 cm2 for PTB. The results of the comparison successfully demonstrated that the hydraulic gauge pressure standards of NIM and PTB in the range of 1 MPa to 10 MPa are equivalent within their claimed uncertainties. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Neutron induced fission cross section measurements of 240Pu and 242Pu

NASA Astrophysics Data System (ADS)

Belloni, F.; Eykens, R.; Heyse, J.; Matei, C.; Moens, A.; Nolte, R.; Plompen, A. J. M.; Richter, S.; Sibbens, G.; Vanleeuw, D.; Wynants, R.

2017-09-01

Accurate neutron induced fission cross section of 240Pu and 242Pu are required in view of making nuclear technology safer and more efficient to meet the upcoming needs for the future generation of nuclear power plants (GEN-IV). The probability for a neutron to induce such reactions figures in the NEA Nuclear Data High Priority Request List [1]. A measurement campaign to determine neutron induced fission cross sections of 240Pu and 242Pu at 2.51 MeV and 14.83 MeV has been carried out at the 3.7 MV Van De Graaff linear accelerator at Physikalisch-Technische Bundesanstalt (PTB) in Braunschweig. Two identical Frisch Grid fission chambers, housing back to back a 238U and a APu target (A = 240 or A = 242), were employed to detect the total fission yield. The targets were molecular plated on 0.25 mm aluminium foils kept at ground potential and the employed gas was P10. The neutron fluence was measured with the proton recoil telescope (T1), which is the German primary standard for neutron fluence measurements. The two measurements were related using a De Pangher long counter and the charge as monitors. The experimental results have an average uncertainty of 3-4% at 2.51 MeV and for 6-8% at 14.81 MeV and have been compared to the data available in literature.

Fission products detection in irradiated TRIGA fuel by means of gamma spectroscopy and MCNP calculation.

PubMed

Cagnazzo, M; Borio di Tigliole, A; Böck, H; Villa, M

2018-05-01

Aim of this work was the detection of fission products activity distribution along the axial dimension of irradiated fuel elements (FEs) at the TRIGA Mark II research reactor of the Technische Universität (TU) Wien. The activity distribution was measured by means of a customized fuel gamma scanning device, which includes a vertical lifting system to move the fuel rod along its vertical axis. For each investigated FE, a gamma spectrum measurement was performed along the vertical axis, with steps of 1 cm, in order to determine the axial distribution of the fission products. After the fuel elements underwent a relatively short cooling down period, different fission products were detected. The activity concentration was determined by calibrating the gamma detector with a standard calibration source of known activity and by MCNP6 simulations for the evaluation of self-absorption and geometric effects. Given the specific TRIGA fuel composition, a correction procedure is developed and used in this work for the measurement of the fission product Zr 95 . This measurement campaign is part of a more extended project aiming at the modelling of the TU Wien TRIGA reactor by means of different calculation codes (MCNP6, Serpent): the experimental results presented in this paper will be subsequently used for the benchmark of the models developed with the calculation codes. Copyright © 2018 Elsevier Ltd. All rights reserved.

Bilateral key comparison CCM.P-K3.1 for absolute pressure measurements from 3 × 10-6 Pa to 9 × 10-4 Pa

NASA Astrophysics Data System (ADS)

Fedchak, J. A.; Bock, Th; Jousten, K.

2014-01-01

This report describes the bilateral key comparison CCM.P-K3.1 between the National Institute of Standards and Technology (NIST) and Physikalisch-Technische Bundesanstalt (PTB) for absolute pressure in the range from 3 × 10-6 Pa to 9 × 10-4 Pa. This comparison was a follow-up to the comparison CCM.P-K3. Two ionization gauges and two spinning rotor gauges (SRGs) were used as the transfer standards for the comparison. The SRGs were used to compare the standards at a pressure of 9 × 10-4 Pa and to normalize the ionization gauge readings. The two ionization gauges were used to compare the standards in the pressure range of from 3 × 10-6 Pa to 3 × 10-4 Pa. Both laboratories used dynamic expansion chambers as standards in the comparison. The two labs showed excellent agreement with each other and with the CCM.P-K3 key comparison reference value (KCRV) over the entire range. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Diffraction efficiency of radially-profiled off-plane reflection gratings

NASA Astrophysics Data System (ADS)

Miles, Drew M.; Tutt, James H.; DeRoo, Casey T.; Marlowe, Hannah; Peterson, Thomas J.; McEntaffer, Randall L.; Menz, Benedikt; Burwitz, Vadim; Hartner, Gisela; Laubis, Christian; Scholze, Frank

2015-09-01

Future X-ray missions will require gratings with high throughput and high spectral resolution. Blazed off-plane reflection gratings are capable of meeting these demands. A blazed grating profile optimizes grating efficiency, providing higher throughput to one side of zero-order on the arc of diffraction. This paper presents efficiency measurements made in the 0.3 - 1.5 keV energy band at the Physikalisch-Technische Bundesanstalt (PTB) BESSY II facility for three holographically-ruled gratings, two of which are blazed. Each blazed grating was tested in both the Littrow configuration and anti-Littrow configuration in order to test the alignment sensitivity of these gratings with regard to throughput. This paper outlines the procedure of the grating experiment performed at BESSY II and discuss the resulting efficiency measurements across various energies. Experimental results are generally consistent with theory and demonstrate that the blaze does increase throughput to one side of zero-order. However, the total efficiency of the non-blazed, sinusoidal grating is greater than that of the blazed gratings, which suggests that the method of manufacturing these blazed profiles fails to produce facets with the desired level of precision. Finally, evidence of a successful blaze implementation from first diffraction results of prototype blazed gratings produce via a new fabrication technique at the University of Iowa are presented.

Variations of atmospheric CH4, N2O and SF6 over Japan and the East China Sea

NASA Astrophysics Data System (ADS)

Ishijima, K.; Goto, D.; Ishidoya, S.; Yashiro, H.; Umezawa, T.; Sugawara, S.; Patra, P. K.; Muromachi, A.; Elkins, J. W.; Dutton, G. S.; Dlugokencky, E. J.; Morimoto, S.; Aoki, S.; Nakazawa, T.

2013-12-01

East Asia is one of the most important regions for anthropogenic sources of both short-lived air pollutants and long-lived greenhouse gases (GHGs). According to recent estimates from an emission database, China has become the largest emitter of long-lived GHGs. Since Japan and the East China Sea are located at the east end of Eurasia, atmospheric species emitted from the continent are transported over them throughout the year. Particularly in winter to spring, outflow of the emitted species is enhanced over the East China Sea due to the East Asian Monsoon. To monitor temporal and spatial variability of atmospheric GHGs in the East Asian region, we conducted systematic GHG observations during 2003-2012 from flask samples collected onboard four different commercial ferry boats, which connected between Wakkanai and Rishiri islands (WAK ; 45.4°N, 141.5°E), between Sakaiminato and Oki islands (OKI ; 35.8°N, 133.2°E), between Kagoshima and Okinawa islands (RYU ; 30.0°N, 130.0°E), and between Ishigaki and Hateruma islands (HTR ; 24.0°N, 124.0°E). Air samples were collected almost weekly, and they were sent to Tohoku University and analyzed for GHGs and related gases. In this study, we present analyses of observed CH4, N2O and SF6 concentrations in comparison with simulations by the Atmospheric general circulation model-based Chemistry Transport model (ACTM). The observed three species predictably show higher concentrations than those observed at Cape Kumukahi (KUM), which is a NOAA air sampling site located in the Central Pacific, reflecting strong outflow of the species from East Asia. Annual mean latitudinal gradients found from the four locations as well as decrease toward KUM are generally reproduced by the ACTM. This is mostly because of reasonable spatial distributions in GHG emissions given in the ACTM. The three species also show discernible seasonal cycles. ACTM simulates seasonal cycles of CH4 and SF6 relatively well, but not for N2O, suggesting

Protection of Landscape Values of Historical Post Military Objects - Complexes in Spatial, Urban and Architectural Planning of Polish Cities

NASA Astrophysics Data System (ADS)

Gawryluk, Dorota; Zagroba, Marek

2017-12-01

Within the borders of modern Poland there are numerous barracks units erected at the turn of the 19th and 20th centuries by the invaders from Russia, Austria and Prussia. Former barracks are a clear element of the history of the place. Historical complexes have a strong influence on the urban landscape and on building their former and contemporary identity. The analysis of functional and landscape absorption of postmodern complexes allows for their adaptation and modern use without limiting the readability of historical values. For this reason, their landscape should be protected comprehensively within the scope of subsequent exposure scales. The aim of the work is to justify the conditions of comprehensive protection of the fortified landscape of the former barracks of the former Russian partition in the landscape of contemporary Polish cities. The article contains a review of the literature on the protection, supplement and access to fortified buildings from the turn of the 19th and 20th centuries in contemporary Poland. A review of current research conducted at various academic centres in Poland, concerning the exposition of fortified buildings in the landscape, is presented. Particular attention was paid to the scales and forms of exposition, proposed for the fortifications and barracks. The paper presents justification for the protection of barracks complexes from the turn of the 19th and 20th centuries in the landscape of Polish cities of the former Russian partition area. Protection of the landscape was proposed in the following scales: superregional, landscape (panorama of the centre), urban (urban structure of the complex in the context of the urban space), architectural and landscape interiors of the complex (WAK) such as alleys, alarm squares, greenery) and detail (view of the building from the outside), interior of the building (characteristic interior spaces, e.g. home chapels, staircases). Taking account of exposures analysis of individual scales

Research on oxidation by air and tempering of Raney nickel electrocatalysts for the H2 anodes of alkali combustion materials cells. Thesis - Braunschweig Technische Univ., 1982

NASA Technical Reports Server (NTRS)

Selbach, H. J.

1984-01-01

The controlled oxidation in air of Raney nickel electrocatalysts was studied, with special attention paid to the quantitative analysis of nickel hydroxide. The content of the latter was determined through X-ray studies, thermogravimetric measurements, and spectral photometric examinations. The dependence of the content on the drying of activated catalyst is determined. The influence of nickel hydroxide on the electrochemical parameters of the catalyst, such as diffusion polarization, is studied, including a measurement of the exchange current density using the potential drop method. Conservation by oxidation in air with ancillary stabilization of the oxide in an H2 flow at 300 C is explored, including reduction by H2, the influence of tempering time, and structural studies on conserved and stabilized catalyst, long term research on the catalyst, including the influence of aging on the reduced catalyst, and the results of impedance measurements are presented.

On the Claim of Modulations in 36Cl Beta Decay and Their Association with Solar Rotation

NASA Astrophysics Data System (ADS)

Pommé, S.; Kossert, K.; Nähle, O.

2017-11-01

Recently, claims were made by Sturrock et al. ( Astropart. Phys. 42, 62, 2013), Sturrock, Fischbach, and Scargle ( Solar Phys. 291, 3467, 2016; arXiv http://arxiv.org/abs/arXiv:1705.03010, 2017) that beta decay can be induced by interaction of the nucleus with solar neutrinos and that cyclic modulations in decay rates are indicative of the dynamics of the solar interior. Transient modulations in residuals from a purely exponential decay curve were observed at frequencies near 11 a^{-1} and 12.7 a^{-1} in repeated activity measurements of a 36Cl source by Alburger, Harbottle, and Norton ( Earth Planet Sci. Lett. 78, 168, 1986) at Brookhaven National Laboratory in a period from 1984 to 1985. Sturrock et al. have speculatively associated them with rotational influence on the solar neutrino flux. In this work, more accurate 36Cl decay-rate measurements - performed at the Physikalisch-Technische Bundesanstalt Braunschweig in the period 2010 - 2013 by means of the triple-to-double coincidence ratio measurement technique - are scrutinised. The residuals from an exponential decay curve were analysed by a weighted Lomb-Scargle periodogram. The existence of modulations in the frequency range between 0.2 a^{-1} and 20 a^{-1} could be excluded down to an amplitude of about 0.0016%. The invariability of the 36Cl decay constant contradicts the speculations made about the deep solar interior on the basis of instabilities in former activity measurements.

Thermographic techniques and adapted algorithms for automatic detection of foreign bodies in food

NASA Astrophysics Data System (ADS)

Meinlschmidt, Peter; Maergner, Volker

2003-04-01

At the moment foreign substances in food are detected mainly by using mechanical and optical methods as well as ultrasonic technique and than they are removed from the further process. These techniques detect a large portion of the foreign substances due to their different mass (mechanical sieving), their different colour (optical method) and their different surface density (ultrasonic detection). Despite the numerous different methods a considerable portion of the foreign substances remain undetected. In order to recognise materials still undetected, a complementary detection method would be desirable removing the foreign substances not registered by the a.m. methods from the production process. In a project with 13 partner from the food industry, the Fraunhofer - Institut für Holzforschung (WKI) and the Technische Unsiversität are trying to adapt thermography for the detection of foreign bodies in the food industry. After the initial tests turned out to be very promising for the differentiation of food stuffs and foreign substances, more and detailed investigation were carried out to develop suitable algorithms for automatic detection of foreign bodies. In order to achieve -besides the mere visual detection of foreign substances- also an automatic detection under production conditions, numerous experiences in image processing and pattern recognition are exploited. Results for the detection of foreign bodies will be presented at the conference showing the different advantages and disadvantages of using grey - level, statistical and morphological image processing techniques.

Measurements of Gas-phase H2so4, Oh, So2 and Aerosol Size Distribution On Mount Zugspitze At The Schneefernerhaus: Estimation of Sources and Sinks of Sulfuric Acid

NASA Astrophysics Data System (ADS)

Uecker, J.; Hanke, M.; Kamm, S.; Umann, B.; Arnold, F.; Poeschl, U.; Niessner, R.

Gas-phase sulfuric acid and OH have been measured by the novel MPI-K ULTRA- CIMS (ultra-trace gas detection by CIMS technique) at the Schneefernerhaus( 2750 m asl; below the summit of Mount Zugspitze, Germany) in October 2001. These mea- surements were accompanied by measurements of SO2 with another MPI-K CIMS instrument and aerosol size distribution measurements by DMPS (differential mobil- ity particle sizer) operated by the Institut fuer Wasserchemie (Technische Universitaet Muenchen). In that way a data set was obtained which allows investigating major sources and sinks of sulfuric acid under relative clean conditions. H2SO4 and espe- cially OH concentrations are relatively well correlated to solar flux. Noon maximum concentrations of OH and H2SO4 of 6.5·106 and 2·106 cm-3, respectively, were ob- served. The average SO2 concentrations were below 20 ppt. The aerosol size distribu- tion was obtained in 39 size ranges from 10 to 1056 nm. Typical aerosol concentrations are in the range of 400 to 1800 cm-3 during the discussed period of time. An estima- tion of the production rate of H2SO4 was inferred building on the reaction of SO2 and OH, while the loss rate was calculated by considering the condensation of H2SO4 on aerosol particles (Fuchs and Sutugin approach). Results of the measurements and calculations will be discussed.

Results for the response function determination of the Compact Neutron Spectrometer

NASA Astrophysics Data System (ADS)

Gagnon-Moisan, F.; Reginatto, M.; Zimbal, A.

2012-03-01

The Compact Neutron Spectrometer (CNS) is a Joint European Torus (JET) Enhancement Project, designed for fusion diagnostics in different plasma scenarios. The CNS is based on a liquid scintillator (BC501A) which allows good discrimination between neutron and gamma radiation. Neutron spectrometry with a BC501A spectrometer requires the use of a reliable, fully characterized detector. The determination of the response matrix was carried out at the Ion Accelerator Facility (PIAF) of the Physikalisch-Technische Bundesanstalt (PTB). This facility provides several monoenergetic beams (2.5, 8, 10, 12 and 14 MeV) and a white field (Emax ~ 17 MeV), which allows for a full characterization of the spectrometer in the region of interest (from ~ 1.5 MeV to ~ 17 MeV). The energy of the incoming neutrons was determined by the time of flight method (TOF), with time resolution in the order of 1 ns. To check the response matrix, the measured pulse height spectra were unfolded with the code MAXED and the resulting energy distributions were compared with those obtained from TOF. The CNS project required modification of the PTB BC501A spectrometer design, to replace an analog data acquisition system (NIM modules) with a digital system developed by the Ente per le Nuove tecnologie, l'Energia e l'Ambiente (ENEA). Results for the new digital system were evaluated using new software developed specifically for this project.

Development and evaluation of thermal model reduction algorithms for spacecraft

NASA Astrophysics Data System (ADS)

Deiml, Michael; Suderland, Martin; Reiss, Philipp; Czupalla, Markus

2015-05-01

This paper is concerned with the topic of the reduction of thermal models of spacecraft. The work presented here has been conducted in cooperation with the company OHB AG, formerly Kayser-Threde GmbH, and the Institute of Astronautics at Technische Universität München with the goal to shorten and automatize the time-consuming and manual process of thermal model reduction. The reduction of thermal models can be divided into the simplification of the geometry model for calculation of external heat flows and radiative couplings and into the reduction of the underlying mathematical model. For simplification a method has been developed which approximates the reduced geometry model with the help of an optimization algorithm. Different linear and nonlinear model reduction techniques have been evaluated for their applicability in reduction of the mathematical model. Thereby the compatibility with the thermal analysis tool ESATAN-TMS is of major concern, which restricts the useful application of these methods. Additional model reduction methods have been developed, which account to these constraints. The Matrix Reduction method allows the approximation of the differential equation to reference values exactly expect for numerical errors. The summation method enables a useful, applicable reduction of thermal models that can be used in industry. In this work a framework for model reduction of thermal models has been created, which can be used together with a newly developed graphical user interface for the reduction of thermal models in industry.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosch, R.; Trosseille, C.; Caillaud, T.

The Laser Megajoule (LMJ) facility located at CEA/CESTA started to operate in the early 2014 with two quadruplets (20 kJ at 351 nm) focused on target for the first experimental campaign. We present here the first set of gated x-ray imaging (GXI) diagnostics implemented on LMJ since mid-2014. This set consists of two imaging diagnostics with spatial, temporal, and broadband spectral resolution. These diagnostics will give basic measurements, during the entire life of the facility, such as position, structure, and balance of beams, but they will also be used to characterize gas filled target implosion symmetry and timing, to studymore » x-ray radiography and hydrodynamic instabilities. The design requires a vulnerability approach, because components will operate in a harsh environment induced by neutron fluxes, gamma rays, debris, and shrapnel. Grazing incidence x-ray microscopes are fielded as far as possible away from the target to minimize potential damage and signal noise due to these sources. These imaging diagnostics incorporate microscopes with large source-to-optic distance and large size gated microchannel plate detectors. Microscopes include optics with grazing incidence mirrors, pinholes, and refractive lenses. Spatial, temporal, and spectral performances have been measured on x-ray tubes and UV lasers at CEA-DIF and at Physikalisch-Technische Bundesanstalt BESSY II synchrotron prior to be set on LMJ. GXI-1 and GXI-2 designs, metrology, and first experiments on LMJ are presented here.« less

Metrology of the Solar Spectral Irradiance at the Top Of Atmosphere in the Near Infrared using Ground Based Instruments. Final results of the PYR-ILIOS campaign (Mauna Loa Observatory, June-July 2016).

NASA Astrophysics Data System (ADS)

Cessateur, G.; Bolsée, D.; Pereira, N.; Sperfeld, P.; Pape, S.

2017-12-01

The availability of reference spectra for the Solar Spectral Irradiance (SSI) is important for the solar physics, the studies of planetary atmospheres and climatology. The near infrared (NIR) part of these spectra is of great interest for its main role for example, in the Earth's radiative budget. Until recently, some large and unsolved discrepancies (up to 10 %) were observed in the 1.6 μm region between space instruments, models and ground-based measurements. We designed a ground-based instrumentation for SSI measurements at the Top Of Atmosphere (TOA) through atmospheric NIR windows using the Bouguer-Langley technique. The main instrument is a double NIR spectroradiometer designed by Bentham (UK), radiometrically characterized at the Royal Belgian Institute for Space Aeronomy. It was absolute calibrated against a high-temperature blackbody as primary standard for spectral irradiance at the Physikalisch-Technische Bundesanstalt (Germany). The PYR-ILIOS campaign was carried out in June to July 2016 at the Mauna Loa Observatory (Hawaii, USA, 3396 m a.s.l.) follows the four-month IRESPERAD campaign which was carried out in the summer 2011 at the Izaña Atmospheric Observatory (Canary Islands, 2367 m a.s.l.). We present here the results of the 3'week PYR-ILIOS campaign and compare them with the ATLAS 3 spectrum as well as from recently reprocessed NIR solar spectra obtained with SOLAR/SOLSPEC on ISS and SCIAMACHY on ENVISAT. The uncertainty budget of the PYR-ILIOS results will be discussed.

Limitations of Dower's inverse transform for the study of atrial loops during atrial fibrillation.

PubMed

Guillem, María S; Climent, Andreu M; Bollmann, Andreas; Husser, Daniela; Millet, José; Castells, Francisco

2009-08-01

Spatial characteristics of atrial fibrillatory waves have been extracted by using a vectorcardiogram (VCG) during atrial fibrillation (AF). However, the VCG is usually not recorded in clinical practice and atrial loops are derived from the 12-lead electrocardiogram (ECG). We evaluated the suitability of the reconstruction of orthogonal leads from the 12-lead ECG for fibrillatory waves in AF. We used the Physikalisch-Technische Bundesanstalt diagnostic ECG database, which contains 15 simultaneously recorded signals (12-lead ECG and three Frank orthogonal leads) of 13 patients during AF. Frank leads were derived from the 12-lead ECG by using Dower's inverse transform. Derived leads were then compared to true Frank leads in terms of the relative error achieved. We calculated the orientation of AF loops of both recorded orthogonal leads and derived leads and measured the difference in estimated orientation. Also, we investigated the relationship of errors in derivation with fibrillatory wave amplitude, frequency, wave residuum, and fit to a plane of the AF loops. Errors in derivation of AF loops were 68 +/- 31% and errors in the estimation of orientation were 35.85 +/- 20.43 degrees . We did not find any correlation among these errors and amplitude, frequency, or other parameters. In conclusion, Dower's inverse transform should not be used for the derivation of orthogonal leads from the 12-lead ECG for the analysis of fibrillatory wave loops in AF. Spatial parameters obtained after this derivation may differ from those obtained from recorded orthogonal leads.

Frequency Comparison of [Formula: see text] Ion Optical Clocks at PTB and NPL via GPS PPP.

PubMed

Leute, J; Huntemann, N; Lipphardt, B; Tamm, Christian; Nisbet-Jones, P B R; King, S A; Godun, R M; Jones, J M; Margolis, H S; Whibberley, P B; Wallin, A; Merimaa, M; Gill, P; Peik, E

2016-07-01

We used precise point positioning, a well-established GPS carrier-phase frequency transfer method to perform a direct remote comparison of two optical frequency standards based on single laser-cooled [Formula: see text] ions operated at the National Physical Laboratory (NPL), U.K. and the Physikalisch-Technische Bundesanstalt (PTB), Germany. At both institutes, an active hydrogen maser serves as a flywheel oscillator which is connected to a GPS receiver as an external frequency reference and compared simultaneously to a realization of the unperturbed frequency of the (2)S1/2(F=0)-(2)D3/2(F=2) electric quadrupole transition in [Formula: see text] via an optical femtosecond frequency comb. To profit from long coherent GPS-link measurements, we extrapolate the fractional frequency difference over the various data gaps in the optical clock to maser comparisons which introduces maser noise to the frequency comparison but improves the uncertainty from the GPS-link instability. We determined the total statistical uncertainty consisting of the GPS-link uncertainty and the extrapolation uncertainties for several extrapolation schemes. Using the extrapolation scheme with the smallest combined uncertainty, we find a fractional frequency difference [Formula: see text] of -1.3×10(-15) with a combined uncertainty of 1.2×10(-15) for a total measurement time of 67 h. This result is consistent with an agreement of the frequencies realized by both optical clocks and with recent absolute frequency measurements against caesium fountain clocks within the corresponding uncertainties.

Quantum efficiency measurements of eROSITA pnCCDs

NASA Astrophysics Data System (ADS)

Ebermayer, Stefanie; Andritschke, Robert; Elbs, Johannes; Meidinger, Norbert; Strüder, Lothar; Hartmann, Robert; Gottwald, Alexander; Krumrey, Michael; Scholze, Frank

2010-07-01

For the eROSITA X-ray telescope, which is planned to be launched in 2012, detectors were developed and fabricated at the MPI Semiconductor Laboratory. The fully depleted, back-illuminated pnCCDs have an ultrathin pn-junction to improve the low-energy X-ray response function and quantum efficiency. The device thickness of 450 μm is fully sensitive to X-ray photons yielding high quantum efficiency of more than 90% at photon energies of 10 keV. An on-chip filter is deposited on top of the entrance window to suppress visible and UV light which would interfere with the X-ray observations. The pnCCD type developed for the eROSITA telescope was characterized in terms of quantum efficiency and spectral response function. The described measurements were performed in 2009 at the synchrotron radiation sources BESSY II and MLS as cooperation between the MPI Semiconductor Laboratory and the Physikalisch-Technische Bundesanstalt (PTB). Quantum efficiency measurements over a wide range of photon energies from 3 eV to 11 keV as well as spectral response measurements are presented. For X-ray energies from 3 keV to 10 keV the quantum efficiency of the CCD including on-chip filter is shown to be above 90% with an attenuation of visible light of more than five orders of magnitude. A detector response model is described and compared to the measurements.

OnlineTED.com--a novel web-based audience response system for higher education. A pilot study to evaluate user acceptance.

PubMed

Kühbeck, Felizian; Engelhardt, Stefan; Sarikas, Antonio

2014-01-01

Audience response (AR) systems are increasingly used in undergraduate medical education. However, high costs and complexity of conventional AR systems often limit their use. Here we present a novel AR system that is platform independent and does not require hardware clickers or additional software to be installed. "OnlineTED" was developed at Technische Universität München (TUM) based on Hypertext Preprocessor (PHP) with a My Structured Query Language (MySQL)-database as server- and Javascript as client-side programming languages. "OnlineTED" enables lecturers to create and manage question sets online and start polls in-class via a web-browser. Students can participate in the polls with any internet-enabled device (smartphones, tablet-PCs or laptops). A paper-based survey was conducted with undergraduate medical students and lecturers at TUM to compare "OnlineTED" with conventional AR systems using clickers. "OnlineTED" received above-average evaluation results by both students and lecturers at TUM and was seen on par or superior to conventional AR systems. The survey results indicated that up to 80% of students at TUM own an internet-enabled device (smartphone or tablet-PC) for participation in web-based AR technologies. "OnlineTED" is a novel web-based and platform-independent AR system for higher education that was well received by students and lecturers. As a non-commercial alternative to conventional AR systems it may foster interactive teaching in undergraduate education, in particular with large audiences.

Progress on glass ceramic ZERODUR enabling nanometer precision

NASA Astrophysics Data System (ADS)

Jedamzik, Ralf; Kunisch, Clemens; Nieder, Johannes; Weber, Peter; Westerhoff, Thomas

2016-03-01

The Semiconductor Industry is making continuous progress in shrinking feature size developing technologies and process to achieve < 10 nm feature size. The required Overlay specification for successful production is in the range one nanometer or even smaller. Consequently, materials designed into metrology systems of exposure or inspection tools need to fulfill ever tighter specification on the coefficient of thermal expansion (CTE). The glass ceramic ZERODUR® is a well-established material in critical components of microlithography wafer stepper and offered with an extremely low coefficient of thermal expansion, the tightest tolerance available on market. SCHOTT is continuously improving manufacturing processes and it's method to measure and characterize the CTE behavior of ZERODUR®. This paper is focusing on the "Advanced Dilatometer" for determination of the CTE developed at SCHOTT in the recent years and introduced into production in Q1 2015. The achievement for improving the absolute CTE measurement accuracy and the reproducibility are described in detail. Those achievements are compared to the CTE measurement accuracy reported by the Physikalische Technische Bundesanstalt (PTB), the National Metrology Institute of Germany. The CTE homogeneity is of highest importance to achieve nanometer precision on larger scales. Additionally, the paper presents data on the short scale CTE homogeneity and its improvement in the last two years. The data presented in this paper will explain the capability of ZERODUR® to enable the extreme precision required for future generation of lithography equipment and processes.

A New Solar Spectrum from 656 to 3088 nm

NASA Astrophysics Data System (ADS)

Meftah, M.; Damé, L.; Bolsée, D.; Pereira, N.; Sluse, D.; Cessateur, G.; Irbah, A.; Sarkissian, A.; Djafer, D.; Hauchecorne, A.; Bekki, S.

2017-08-01

The solar spectrum is a key parameter for different scientific disciplines such as solar physics, climate research, and atmospheric physics. The SOLar SPECtrometer (SOLSPEC) instrument of the Solar Monitoring Observatory (SOLAR) payload onboard the International Space Station (ISS) has been built to measure the solar spectral irradiance (SSI) from 165 to 3088 nm with high accuracy. To cover the full wavelength range, three double-monochromators with concave gratings are used. We present here a thorough analysis of the data from the third channel/double-monochromator, which covers the spectral range between 656 and 3088 nm. A new reference solar spectrum is therefore obtained in this mainly infrared wavelength range (656 to 3088 nm); it uses an absolute preflight calibration performed with the blackbody of the Physikalisch-Technische Bundesanstalt (PTB). An improved correction of temperature effects is also applied to the measurements using in-flight housekeeping temperature data of the instrument. The new solar spectrum (SOLAR-IR) is in good agreement with the ATmospheric Laboratory for Applications and Science (ATLAS 3) reference solar spectrum from 656 nm to about 1600 nm. However, above 1600 nm, it agrees better with solar reconstruction models than with spacecraft measurements. The new SOLAR/SOLSPEC measurement of solar spectral irradiance at about 1600 nm, corresponding to the minimum opacity of the solar photosphere, is 248.08 ± 4.98 mW m-2 nm-1 (1 σ), which is higher than recent ground-based evaluations.

Toward a standard reference database for computer-aided mammography

NASA Astrophysics Data System (ADS)

Oliveira, Júlia E. E.; Gueld, Mark O.; de A. Araújo, Arnaldo; Ott, Bastian; Deserno, Thomas M.

2008-03-01

Because of the lack of mammography databases with a large amount of codified images and identified characteristics like pathology, type of breast tissue, and abnormality, there is a problem for the development of robust systems for computer-aided diagnosis. Integrated to the Image Retrieval in Medical Applications (IRMA) project, we present an available mammography database developed from the union of: The Mammographic Image Analysis Society Digital Mammogram Database (MIAS), The Digital Database for Screening Mammography (DDSM), the Lawrence Livermore National Laboratory (LLNL), and routine images from the Rheinisch-Westfälische Technische Hochschule (RWTH) Aachen. Using the IRMA code, standardized coding of tissue type, tumor staging, and lesion description was developed according to the American College of Radiology (ACR) tissue codes and the ACR breast imaging reporting and data system (BI-RADS). The import was done automatically using scripts for image download, file format conversion, file name, web page and information file browsing. Disregarding the resolution, this resulted in a total of 10,509 reference images, and 6,767 images are associated with an IRMA contour information feature file. In accordance to the respective license agreements, the database will be made freely available for research purposes, and may be used for image based evaluation campaigns such as the Cross Language Evaluation Forum (CLEF). We have also shown that it can be extended easily with further cases imported from a picture archiving and communication system (PACS).

Simultaneous integrated boost-intensity modulated radiation therapy for inoperable hepatocellular carcinoma.

PubMed

Kim, Tae Hyun; Park, Joong-Won; Kim, Yeon-Joo; Kim, Bo Hyun; Woo, Sang Myung; Moon, Sung Ho; Kim, Sang Soo; Lee, Woo Jin; Kim, Dae Yong; Kim, Chang-Min

2014-10-01

The aim of this work was to evaluate the clinical efficacy and safety of simultaneous integrated boost-intensity modulated radiation therapy (SIB-IMRT) in patients with inoperable hepatocellular carcinoma (HCC). A total of 53 patients with inoperable HCC underwent SIB-IMRT using two dose-fractionation schemes, depending on the proximity of gastrointestinal structures. The 41 patients in the low dose-fractionation (LD) group, with internal target volume (ITV) < 1 cm from gastrointestinal structures, received total doses of 55 and 44 Gy in 22 fractions to planning target volume 1 (PTV1) and 2 (PTV2), respectively. The 12 patients in the high dose-fractionation (HD) group, with ITV ≥ 1 cm from gastrointestinal structures, received total doses of 66 and 55 Gy in 22 fractions to the PTV1 and PTV2, respectively. Overall, treatment was well tolerated, with no grade > 3 toxicity. The LD group had larger sized tumors (median: 6 vs. 3.4 cm) and greater frequencies of vascular invasion (80.6 vs. 16.7 %) than patients in the HD group (p < 0.05 each). The median overall survival (OS) was 25.1 mKonzept ist machbar und sicheronths and the actuarial 2-year local progression-free survival (LPFS), relapse-free survival (RFS), and OS rates were 67.3, 14.7, and 54.7  %, respectively. The HD group tended to show better tumor response (100 vs. 62.2 %, p = 0.039) and 2-year LPFS (85.7 vs. 59  %, p = 0.119), RFS (38.1 vs. 7.3 %, p = 0.063), and OS (83.3 vs. 44.3 %, p = 0.037) rates than the LD group. Multivariate analysis showed that tumor response was significantly associated with OS. SIB-IMRT is feasible and safe for patients with inoperable HCC.

Review of access, licenses and understandability of open datasets used in hydrology research

NASA Astrophysics Data System (ADS)

Falkenroth, Esa; Arheimer, Berit; Lagerbäck Adolphi, Emma

2015-04-01

The amount of open data available for hydrology research is continually growing. In the EU-funded project SWITCH-ON (Sharing Water-related Information to Tackle Changes in the Hydrosphere - for Operational Needs), we are addressing water concerns by exploring and exploiting the untapped potential of these new open data. This work is enabled by many ongoing efforts to facilitate the use of open data. For instance, a number of portals (such as the GEOSS Portal and the INSPIRE community geoportal) provide the means to search for such open data sets and open spatial data services. However, in general, the systematic use of available open data is still fairly uncommon in hydrology research. Factors that limits (re)usability of a data set include: (1) accessibility, (2) understandability and (3) licences. If you cannot access the data set, you cannot use if for research. If you cannot understand the data set you cannot use it for research. Finally, if you are not permitted to use the data, you cannot use it for research. Early on in the project, we sent out a questionnaire to our research partners (SMHI, Universita di Bologna, University of Bristol, Technische Universiteit Delft and Technische Universitaet Wien) to find out what data sets they were planning to use in their experiments. The result was a comprehensive list of useful open data sets. Later, this list of data sets was extended with additional information on data sets for planned commercial water-information products and services. With the list of 50 common data sets as a starting point, we reviewed issues related to access, understandability and licence conditions. Regarding access to data sets, a majority of data sets were available through direct internet download via some well-known transfer protocol such as ftp or http. However, several data sets were found to be inaccessible due to server downtime, incorrect links or problems with the host database management system. One possible explanation for this

Kinase domain-targeted isolation of defense-related receptor-like kinases (RLK/Pelle) in Platanus×acerifolia: phylogenetic and structural analysis.

PubMed

Pilotti, Massimo; Brunetti, Angela; Uva, Paolo; Lumia, Valentina; Tizzani, Lorenza; Gervasi, Fabio; Iacono, Michele; Pindo, Massimo

2014-12-08

Plant receptor-like kinase (RLK/Pelle) family regulates growth and developmental processes and interaction with pathogens and symbionts.Platanaceae is one of the earliest branches of Eudicots temporally located before the split which gave rise to Rosids and Asterids. Thus investigations into the RLK family in Platanus can provide information on the evolution of this gene family in the land plants.Moreover RLKs are good candidates for finding genes that are able to confer resistance to Platanus pathogens. Degenerate oligonucleotide primers targeting the kinase domain of stress-related RLKs were used to isolate for the first time 111 RLK gene fragments in Platanus×acerifolia. Sequences were classified as candidates of the following subfamilies: CrRLK1L, LRR XII, WAK-like, and LRR X-BRI1 group. All the structural features typical of the RLK kinase domain were identified, including the non-RD motif which marks potential pathogen recognition receptors (PRRs). The LRR XII candidates, whose counterpart in Arabidopsis and rice comprises non-RD PRRs, were mostly non-RD kinases, suggesting a group of PRRs. Region-specific signatures of a relaxed purifying selection in the LRR XII candidates were also found, which is novel for plant RLK kinase domain and further supports the role of LRR XII candidates as PRRs. As we obtained CrRLK1L candidates using primers designed on Pto of tomato, we analysed the phylogenetic relationship between CrRLK1L and Pto-like of plant species. We thus classified all non-solanaceous Pto-like genes as CrRLK1L and highlighted for the first time the close phylogenetic vicinity between CrRLK1L and Pto group. The origins of Pto from CrRLK1L is proposed as an evolutionary mechanism. The signatures of relaxed purifying selection highlight that a group of RLKs might have been involved in the expression of phenotypic plasticity and is thus a good candidate for investigations into pathogen resistance.Search of Pto-like genes in Platanus highlighted the close

Aperture alignment in autocollimator-based deflectometric profilometers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Geckeler, R. D., E-mail: Ralf.Geckeler@ptb.de; Just, A.; Kranz, O.

2016-05-15

During the last ten years, deflectometric profilometers have become indispensable tools for the precision form measurement of optical surfaces. They have proven to be especially suitable for characterizing beam-shaping optical surfaces for x-ray beamline applications at synchrotrons and free electron lasers. Deflectometric profilometers use surface slope (angle) to assess topography and utilize commercial autocollimators for the contactless slope measurement. To this purpose, the autocollimator beam is deflected by a movable optical square (or pentaprism) towards the surface where a co-moving aperture limits and defines the beam footprint. In this paper, we focus on the precise and reproducible alignment of themore » aperture relative to the autocollimator’s optical axis. Its alignment needs to be maintained while it is scanned across the surface under test. The reproducibility of the autocollimator’s measuring conditions during calibration and during its use in the profilometer is of crucial importance to providing precise and traceable angle metrology. In the first part of the paper, we present the aperture alignment procedure developed at the Advanced Light Source, Lawrence Berkeley National Laboratory, USA, for the use of their deflectometric profilometers. In the second part, we investigate the topic further by providing extensive ray tracing simulations and calibrations of a commercial autocollimator performed at the Physikalisch-Technische Bundesanstalt, Germany, for evaluating the effects of the positioning of the aperture on the autocollimator’s angle response. The investigations which we performed are crucial for reaching fundamental metrological limits in deflectometric profilometry.« less

Rudolf Mössbauer in Munich

NASA Astrophysics Data System (ADS)

Kalvius, G. M.; Kienle, P.

Mössbauer and one of the authors (PK) started in 1949 studying physics at the Technische Hochschule München (THM), which was still under reconstruction from the war damages. It offered two directions for studying physics: "Physik A" and "Physik B." I took courses in "Physik A," which meant Technical Physics; Mössbauer studied "Physik B," which was General Physics. Actually, the lectures of both directions were not too different up to the forth semester, followed by a "pre-diploma" examination, which Mössbauer passed in 1952. I as "Physik A" student had besides the various physics, chemistry, and mathematics courses, in addition lectures in Technical Electricity, Technical Mechanics, Technical Thermodynamics, and later Measurement Engineering offered by very famous professors, such as W.O. Schumann, L. Föppl, W. Nußelt, and H. Piloty. Our physics teachers were G. Joos (Experimental physics), G. Hettner (Theoretical Physics), and W. Meissner (Technical Physics); in mathematics, we enjoyed lectures by J. Lense and R. Sauer, and interesting chemistry lectures by W. Hieber. Thus we received a high-class classical education, but quantum mechanics was not a compulsory subject. Mössbauer complained about this deficiency when he realized that the effect he found was a quantum mechanical phenomenon. Quantum mechanics was offered as an optional subject by Prof. Fick and Prof. Haug. Mössbauer just missed to take these advanced lectures, although he was highly talented in mathematics and received even a tutoring position in the mathematics institute of Prof. R. Sauer, while I worked in engineering projects and had extensive industrial training.

The BNM-LPTF software for the frequency comparison of atomic clocks by the carrier phase of the GPS signal.

PubMed

Taris, F; Uhrich, P; Petit, G; Jiang, Z; Barillet, R; Hamouda, F

2000-01-01

This paper describes the software and equipment used at the Laboratoire Primaire du Temps et des Frequences du Bureau National de Metrologie (BNM-LPTF), Paris, France. Two H-masers in short baseline, one located at the BNM-LPTF and the other at the Laboratoire de l'Horloge Atomique du Centre National de la Recherche Scientifique (CNRS-LHA), Orsay, France, were computed in parallel with the BNM-LPTF software and with the BERNESE V 4.1 software. The comparison of the results issued from both computations shows an agreement within 100 ps (1 sigma). In addition, comparisons with the BNM-LPTF software were made over 10 days with the H-masers located at the Physikalisch-Technische Bundesanstalt (PTB), Braunschweig, Germany, and another at the National Physical Laboratory (NPL), Teddington, United Kingdom. The data collected show that a modulation with an amplitude of 50 ps and a period of 700-800 ps affects the equipment of the NPL. In addition, these comparisons show that the noise of the instruments together with the environmental conditions at the PTB was higher than that of the NPL and the BNM-LPTF during the observation period. The best relative frequency stability obtained, in the BNM-LPTF/NPL comparison, is about 3x10(-15) for averaging periods between 6x10(4) s and 3x10(5) s. This result is in good agreement with the expected stability of H-masers. It demonstrates that the noise brought by the GPS carrier phase measurements can be averaged out at this level.

OnlineTED.com − a novel web-based audience response system for higher education. A pilot study to evaluate user acceptance

PubMed Central

Kühbeck, Felizian; Engelhardt, Stefan; Sarikas, Antonio

2014-01-01

Background and aim: Audience response (AR) systems are increasingly used in undergraduate medical education. However, high costs and complexity of conventional AR systems often limit their use. Here we present a novel AR system that is platform independent and does not require hardware clickers or additional software to be installed. Methods and results: “OnlineTED” was developed at Technische Universität München (TUM) based on Hypertext Preprocessor (PHP) with a My Structured Query Language (MySQL)-database as server- and Javascript as client-side programming languages. “OnlineTED” enables lecturers to create and manage question sets online and start polls in-class via a web-browser. Students can participate in the polls with any internet-enabled device (smartphones, tablet-PCs or laptops). A paper-based survey was conducted with undergraduate medical students and lecturers at TUM to compare "OnlineTED" with conventional AR systems using clickers. "OnlineTED" received above-average evaluation results by both students and lecturers at TUM and was seen on par or superior to conventional AR systems. The survey results indicated that up to 80% of students at TUM own an internet-enabled device (smartphone or tablet-PC) for participation in web-based AR technologies. Summary and Conclusion: “OnlineTED” is a novel web-based and platform-independent AR system for higher education that was well received by students and lecturers. As a non-commercial alternative to conventional AR systems it may foster interactive teaching in undergraduate education, in particular with large audiences. PMID:24575156

Iron Disilicide as High-Temperature Reference Material for Traceable Measurements of Seebeck Coefficient Between 300 K and 800 K

NASA Astrophysics Data System (ADS)

Ziolkowski, Pawel; Stiewe, Christian; de Boor, Johannes; Druschke, Ines; Zabrocki, Knud; Edler, Frank; Haupt, Sebastian; König, Jan; Mueller, Eckhard

2017-01-01

Thermoelectric generators (TEGs) convert heat to electrical energy by means of the Seebeck effect. The Seebeck coefficient is a central thermoelectric material property, measuring the magnitude of the thermovoltage generated in response to a temperature difference across a thermoelectric material. Precise determination of the Seebeck coefficient provides the basis for reliable performance assessment in materials development in the field of thermoelectrics. For several reasons, measurement uncertainties of up to 14% can often be observed in interlaboratory comparisons of temperature-dependent Seebeck coefficient or in error analyses on currently employed instruments. This is still too high for an industrial benchmark and insufficient for many scientific investigations and technological developments. The TESt (thermoelectric standardization) project was launched in 2011, funded by the German Federal Ministry of Education and Research (BMBF), to reduce measurement uncertainties, engineer traceable and precise thermoelectric measurement techniques for materials and TEGs, and develop reference materials (RMs) for temperature-dependent determination of the Seebeck coefficient. We report herein the successful development and qualification of cobalt-doped β-iron disilicide ( β-Fe0.95Co0.05Si2) as a RM for high-temperature thermoelectric metrology. A brief survey on technological processes for manufacturing and machining of samples is presented. Focus is placed on metrological qualification of the iron disilicide, results of an international round-robin test, and final certification as a reference material in accordance with ISO-Guide 35 and the "Guide to the expression of uncertainty in measurement" by the Physikalisch-Technische Bundesanstalt, the national metrology institute of Germany.

Absolute Radiometric Calibration of EUNIS-06

NASA Technical Reports Server (NTRS)

Thomas, R. J.; Rabin, D. M.; Kent, B. J.; Paustian, W.

2007-01-01

The Extreme-Ultraviolet Normal-Incidence Spectrometer (EUNIS) is a soundingrocket payload that obtains imaged high-resolution spectra of individual solar features, providing information about the Sun's corona and upper transition region. Shortly after its successful initial flight last year, a complete end-to-end calibration was carried out to determine the instrument's absolute radiometric response over its Longwave bandpass of 300 - 370A. The measurements were done at the Rutherford-Appleton Laboratory (RAL) in England, using the same vacuum facility and EUV radiation source used in the pre-flight calibrations of both SOHO/CDS and Hinode/EIS, as well as in three post-flight calibrations of our SERTS sounding rocket payload, the precursor to EUNIS. The unique radiation source provided by the Physikalisch-Technische Bundesanstalt (PTB) had been calibrated to an absolute accuracy of 7% (l-sigma) at 12 wavelengths covering our bandpass directly against the Berlin electron storage ring BESSY, which is itself a primary radiometric source standard. Scans of the EUNIS aperture were made to determine the instrument's absolute spectral sensitivity to +- 25%, considering all sources of error, and demonstrate that EUNIS-06 was the most sensitive solar E W spectrometer yet flown. The results will be matched against prior calibrations which relied on combining measurements of individual optical components, and on comparisons with theoretically predicted 'insensitive' line ratios. Coordinated observations were made during the EUNIS-06 flight by SOHO/CDS and EIT that will allow re-calibrations of those instruments as well. In addition, future EUNIS flights will provide similar calibration updates for TRACE, Hinode/EIS, and STEREO/SECCHI/EUVI.

Quantitative comparison between PGNAA measurements and MCNP calculations in view of the characterization of radioactive wastes in Germany and France

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mauerhofer, E.; Havenith, A.; Kettler, J.

The Forschungszentrum Juelich GmbH (FZJ), together with the Aachen University Rheinisch-Westfaelische Technische Hochschule (RWTH) and the French Alternative Energies and Atomic Energy Commission (CEA Cadarache) are involved in a cooperation aiming at characterizing toxic and reactive elements in radioactive waste packages by means of Prompt Gamma Neutron Activation Analysis (PGNAA). The French and German waste management agencies have indeed defined acceptability limits concerning these elements in view of their projected geological repositories. A first measurement campaign was performed in the new Prompt Gamma Neutron Activation Analysis (PGNAA) facility called MEDINA, at FZJ, to assess the capture gamma-ray signatures of somemore » elements of interest in large samples up to waste drums with a volume of 200 liter. MEDINA is the acronym for Multi Element Detection based on Instrumental Neutron Activation. This paper presents MCNP calculations of the MEDINA facility and quantitative comparison between measurement and simulation. Passive gamma-ray spectra acquired with a high purity germanium detector and calibration sources are used to qualify the numerical model of the crystal. Active PGNAA spectra of a sodium chloride sample measured with MEDINA then allow for qualifying the global numerical model of the measurement cell. Chlorine indeed constitutes a usual reference with reliable capture gamma-ray production data. The goal is to characterize the entire simulation protocol (geometrical model, nuclear data, and postprocessing tools) which will be used for current measurement interpretation, extrapolation of the performances to other types of waste packages or other applications, as well as for the study of future PGNAA facilities.« less

SUMIRAD: a near real-time MMW radiometer imaging system for threat detection in an urban environment

NASA Astrophysics Data System (ADS)

Dill, Stephan; Peichl, Markus; Rudolf, Daniel

2012-10-01

The armed forces are nowadays confronted with a wide variety of types of operations. During peace keeping missions in an urban environment, where small units patrol the streets with armored vehicles, the team leader is confronted with a very complex threat situation. The asymmetric imminence arises in most cases from so called IEDs (Improvised explosive devices) which are found in a multitude of versions. In order to avoid risky situations the early detection of possible threats due to advanced reconnaissance and surveillance sensors will provide an important advantage. A European consortium consisting of GMV S.A. (Spain, "Grupo Tecnològico e Industrial"), RMA (Belgium, "Royal Military Academy"), TUM ("Technische Universität München") and DLR (Germany, "Deutsches Zentrum für Luft- und Raumfahrt") developed in the SUM project (Surveillance in an urban environment using mobile sensors) a low-cost multi-sensor vehicle based surveillance system in order to enhance situational awareness for moving security and military patrols as well as for static checkpoints. The project was funded by the European Defense Agency (EDA) in the Joint Investment Program on Force Protection (JIP-FP). The SUMIRAD (SUM imaging radiometer) system, developed by DLR, is a fast radiometric imager and part of the SUM sensor suite. This paper will present the principle of the SUMIRAD system and its key components. Furthermore the image processing will be described. Imaging results from several measurement campaigns will be presented. The overall SUM system and the individual subsystems are presented in more detail in separate papers during this conference.

The MICROSCOPE inertial sensor: qualification status

NASA Astrophysics Data System (ADS)

Santos Rodrigues, Manuel; Touboul, Pierre; Liorzou, Francoise; Bodoville, Guillaume

The payload of the MICROSCOPE space mission embarks two pairs of test-masses, made of Platinum Rhodium alloy and Titanium alloy, that are used to perform the test of the Uni-versality of free fall, i.e. of the Equivalence Principle (EP). These cylindrical test-masses are at the core of the inertial sensors used to perform the full drag-free and attitude control of the satellite. Based on electrostatic space accelerometers developed in ONERA, the payload has been designed with challenging technologies for the electronics and for the sensor core. Following a very specific development plan, the payload is currently in the qualification phase, by being integrated after a long period of challenging accurate production and metrology. The results obtained for the driving components of the expected performance will be addressed. In particular, the micrometric metrology of the instrument core, made in gold coated silica, will be presented: the specific ultra-sonic machining processes, optimized for this production, indeed exhibit a few micrometers accuracy. Similar accuracy is obtained for the geometry of the test-masses, produced and controlled in collaboration with the PTB, Physikalisch-Technische Bundesanstalt. This accurate geometry and the specific selected shape is mandatory to balance the mass moment of inertia for gravity gradient rejection and to highly decouple the instru-ment measurement axes. The first results of the flight model electronics will be also presented demonstrating micro-volt low noise and weak thermal sensitivity in good agreement with the requirements. At last, the development status of the payload will be mentioned insisting on the coming milestones.

Metrology of the Solar Spectral Irradiance at the Top Of Atmosphere in the Near Infrared using Ground Based Instruments. Presentation of the PYR-ILIOS campaign (Mauna Loa Observatory, June-July 2016).

NASA Astrophysics Data System (ADS)

Cessateur, G.; Bolsée, D.; Pereira, N.; Sperfeld, P.; Pape, S.

2016-12-01

The availability of reference spectra for the Solar Spectral Irradiance (SSI) is of the most importance for the solar physics, the studies of planetary atmospheres and climatology. The near infrared (NIR) part of these spectra is of great interest for its main role for example, in the Earth's radiative budget. However, some large and unsolved discrepancies (up to 10 %) are observed in the 1.6 μm region between recent measurements from space instruments and modelling. We developed a ground-based instrumentation dedicated to SSI measurements of the Top Of Atmosphere (TOA), obtained through atmospheric NIR windows using the Bouguer-Langley technique. The instruments are a double spectroradiometer designed by Bentham (UK) and a 6-channels NIR filters radiometer. Both were radiometrically characterized at the Royal Belgian Institute for Space Aeronomy. In the following they were calibrated against a high-temperature blackbody as primary standard for spectral irradiance at the Physikalisch-Technische Bundesanstalt (Germany). The PYR-ILIOS campaign carried out in June to July 2016 at the Mauna Loa Observatory (Hawaii, USA, 3396 m a.s.l.) is a follower of the four-month IRESPERAD campaign which was carried out in 2011 at the Izaña Atmospheric Observatory (Canary Islands, 2367 m a.s.l.). We present here the results of the 3 weeks PYR-ILIOS campaign and compare them with the outcome from IRESPERAD as well as from other ground-based, airborne or space experiments will be presented. The standard uncertainty of the PYR-ILIOS results will be discussed.

Quantitative comparison between PGNAA measurements and MCNP calculations in view of the characterization of radioactive wastes in Germany and France

NASA Astrophysics Data System (ADS)

Mauerhofer, E.; Havenith, A.; Carasco, C.; Payan, E.; Kettler, J.; Ma, J. L.; Perot, B.

2013-04-01

The Forschungszentrum Jülich GmbH (FZJ), together with the Aachen University Rheinisch-Westfaelische Technische Hochschule (RWTH) and the French Alternative Energies and Atomic Energy Commission (CEA Cadarache) are involved in a cooperation aiming at characterizing toxic and reactive elements in radioactive waste packages by means of Prompt Gamma Neutron Activation Analysis (PGNAA) [1]. The French and German waste management agencies have indeed defined acceptability limits concerning these elements in view of their projected geological repositories. A first measurement campaign was performed in the new Prompt Gamma Neutron Activation Analysis (PGNAA) facility called MEDINA, at FZJ, to assess the capture gamma-ray signatures of some elements of interest in large samples up to waste drums with a volume of 200 liter. MEDINA is the acronym for Multi Element Detection based on Instrumental Neutron Activation. This paper presents MCNP calculations of the MEDINA facility and quantitative comparison between measurement and simulation. Passive gamma-ray spectra acquired with a high purity germanium detector and calibration sources are used to qualify the numerical model of the crystal. Active PGNAA spectra of a sodium chloride sample measured with MEDINA then allow for qualifying the global numerical model of the measurement cell. Chlorine indeed constitutes a usual reference with reliable capture gamma-ray production data. The goal is to characterize the entire simulation protocol (geometrical model, nuclear data, and postprocessing tools) which will be used for current measurement interpretation, extrapolation of the performances to other types of waste packages or other applications, as well as for the study of future PGNAA facilities.

Argan woodlands in South Morocco as an area of conflict between degradation and sustainable land use

NASA Astrophysics Data System (ADS)

Kirchhoff, Mario; Kagermeier, Andreas; Ries, Johannes B.

2016-04-01

The Argan woodlands are endemic for South Morocco and prone to degradation through expanding and intensifying agriculture and overgrazing. Unvegetated areas extend further due to degradation of soil and vegetation. Here infiltration is less than on vegetated areas, while runoff and soil erosion increase. The sale of the highly valuable oil, gained from the seeds of the argan tree, can be seen as an economic alternative for the region and a chance of survival for the argan woodlands. With the introduction of women's cooperatives for the production and sale of the oil, the Gesellschaft für Technische Zusammenarbeit (GTZ, Association for Technical Cooperation) hoped to halt argan degradation from 1995 to 2002. The effects of this approach shall be studied in a proposed DFG-project. The erosion gradient between soils under canopy cover and intertree areas in varying stages of degradation will be at the center of the analysis. Insight into onsite and offsite degradation shall be gained through the measurement of runoff and erosion rates, which lead to rill and gully erosion downslope. Measurements of soil chemical and physical properties might also help indicate when an argan woodland can be classified as natural. Furthermore to be studied are the effects of the new found value of the Argan woodlands among the local population with focus on regional tourism and a possible reduction of grazing pressure. Sustainable soil management in combination with the needs of the local population is essential for a sustainable land use in the region.

[Helsinki declaration on patient safety in anaesthesiology -part 10: infection control/hygiene].

PubMed

Kerwat, Klaus; Wulf, Hinnerk

2013-11-01

There is a plethora of laws, regulations, guidelines and recommendations relating to infection control and hygiene. Major issues are the prevention of nosocomial infections, staff protection and environmental protection. Of the highest relevance are the infection control law [Infektionsschutzgesetz (IfSG)], the hygiene regulations of the German federal states [Hygieneverordnungen der Bundesländer], the German technical rules for biological materials [Technische Regel Biologische Arbeitsstoffe 250 (TRBA 250)] - biological materials in health-care and welfare work [Biologische Arbeitsstoffe im Gesundheitswesen und in der Wohlfahrtspflege], the guidelines for hospital hygiene and prevention of infection of the commission for hospital hygiene and prevention of infection of the Robert-Koch Institute [Richtlinie für Krankenhaushygiene und Infektionsprävention von der Kommission für Krankenhaushygiene und Infektionsprävention (KRINKO) beim Robert Koch-Institut], the recommendations of the commission on anti-infectives, resistance and therapy of the Robert-Koch Institute [Empfehlungen der Kommission Antiinfektiva, Resistenz und Therapie (ART) beim Robert Koch-Institut]. Of subordinate importance are, e.g., the recommendations of the German Society for Anesthesiology and Intensive Medicine (DGAI). It is practically impossible for an anesthesiologist working in a hospital to have knowledge of all laws, regulations, guidelines and recommendations. And this is also not reasonable. Thus it is necessary to distinguish the relevant from the irrelevant. Checklists can be useful here. The most important and effective individual action in hospital hygiene is and remains hand hygiene as is propagated in the action "clean hands", irrespective of all laws, regulations, guidelines and recommendations. © Georg Thieme Verlag Stuttgart · New York.

Analysis of Radon Decay Data and its Implications for Physics, Geophysics, and Solar Physics.

NASA Astrophysics Data System (ADS)

Sturrock, Peter A.; Fischbach, E.; Jenkins, J. H.; Steinitz, G.

2012-05-01

We present an analysis of about 29,000 measurements of gamma radiation associated with the decay of radon in a sealed container at the Geological Survey of Israel (GSI) Laboratory in Jerusalem between January 28 2007 and May 10 2010. These measurements exhibit strong variations in time of year and time of day, which may be due in part to environmental influences. However, time-series analysis also reveals a number of periodicities, notably at 11.2 year-1 and 12.5 year-1, which we have found in other nuclear-decay data --including data acquired at the Brookhaven National Laboratory and the Physiklisch-Technische Bundesanstalt-- which we attribute to a solar influence. A distinct property of the GSI results is that the annual oscillation is much stronger in daytime data than in nighttime data, but the opposite is true for all other oscillations. We speculate on possible interpretations of this curious result. Solar neutrinos remain our prime suspect as the agent responsible for beta-decay anomalies. These results have implications for physics (that nuclear decay rates are not constant and may be stimulated); for geophysics (that the variability of radon measurements cannot be ascribed entirely to atmospheric and solid-earth processes); and for solar physics (that the Sun contains an inner tachocline, separating a slowly rotating core from the radiative zone, which has properties similar to those of the outer tachocline separating the radiative zone from the convection zone). This work was supported by DOE grant DE-AC-02-76ER071428.

SUPPLEMENTARY COMPARISON: Final report of the bilateral comparison APMP.M.H-S2 of hardness measurement for Rockwell scales A and B between PTB and NIMT

NASA Astrophysics Data System (ADS)

Sanponpute, Tassanai; Meesaplak, Apichaya; Herrmann, Konrad; Menelao, Febo

2009-01-01

The bilateral comparison APMP.M.H-S2 of hardness measurement for Rockwell scales A and B was arranged by the National Institute of Metrology of Thailand, NIMT, as the pilot laboratory, comparing with Physikalisch-Technische Bundesanstalt of Germany, PTB. The objective of this comparison was to confirm the calibration and measurement capabilities of NIMT in hardness measurement. The period of measurement covered March to August 2009. There were two sets of artefacts: scale A artefact set and scale B artefact set. The scale A artefact set consisted of seven hardness blocks: 35 HRA, 40 HRA, 55 HRA, 60 HRA, 70 HRA, 80 HRA, 85 HRA. The artefact set for scale B consisted of nine hardness blocks: 25 HRB, 30 HRB, 40 HRB, 50 HRB, 60 HRB, 70 HRB, 80 HRB, 90 HRB, 100 HRB. Laboratories had to ensure that the primary Rockwell hardness machines passed the verification process according to ISO 6508-3. Then participants measured the hardness value by making ten indentations in a designated area of each artefact block. Hardness measurement results and uncertainty budget were then reported to the pilot laboratory and were used to compute the degrees of equivalence in terms of the Comparison Reference Value (CRV) and En ratio. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by APMP, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).

First international comparison of fountain primary frequency standards via a long distance optical fiber link

NASA Astrophysics Data System (ADS)

Guéna, J.; Weyers, S.; Abgrall, M.; Grebing, C.; Gerginov, V.; Rosenbusch, P.; Bize, S.; Lipphardt, B.; Denker, H.; Quintin, N.; Raupach, S. M. F.; Nicolodi, D.; Stefani, F.; Chiodo, N.; Koke, S.; Kuhl, A.; Wiotte, F.; Meynadier, F.; Camisard, E.; Chardonnet, C.; Le Coq, Y.; Lours, M.; Santarelli, G.; Amy-Klein, A.; Le Targat, R.; Lopez, O.; Pottie, P. E.; Grosche, G.

2017-06-01

We report on the first comparison of distant caesium fountain primary frequency standards (PFSs) via an optical fiber link. The 1415 km long optical link connects two PFSs at LNE-SYRTE (Laboratoire National de métrologie et d’Essais—SYstème de Références Temps-Espace) in Paris (France) with two at PTB (Physikalisch-Technische Bundesanstalt) in Braunschweig (Germany). For a long time, these PFSs have been major contributors to accuracy of the International Atomic Time (TAI), with stated accuracies of around 3× {{10}-16} . They have also been the references for a number of absolute measurements of clock transition frequencies in various optical frequency standards in view of a future redefinition of the second. The phase coherent optical frequency transfer via a stabilized telecom fiber link enables far better resolution than any other means of frequency transfer based on satellite links. The agreement for each pair of distant fountains compared is well within the combined uncertainty of a few 10-16 for all the comparisons, which fully supports the stated PFSs’ uncertainties. The comparison also includes a rubidium fountain frequency standard participating in the steering of TAI and enables a new absolute determination of the 87Rb ground state hyperfine transition frequency with an uncertainty of 3.1× {{10}-16} . This paper is dedicated to the memory of André Clairon, who passed away on 24 December 2015, for his pioneering and long-lasting efforts in atomic fountains. He also pioneered optical links from as early as 1997.

Dynamic registration of an optical see-through HMD into a wide field-of-view rotorcraft flight simulation environment

NASA Astrophysics Data System (ADS)

Viertler, Franz; Hajek, Manfred

2015-05-01

To overcome the challenge of helicopter flight in degraded visual environments, current research considers headmounted displays with 3D-conformal (scene-linked) visual cues as most promising display technology. For pilot-in-theloop simulations with HMDs, a highly accurate registration of the augmented visual system is required. In rotorcraft flight simulators the outside visual cues are usually provided by a dome projection system, since a wide field-of-view (e.g. horizontally > 200° and vertically > 80°) is required, which can hardly be achieved with collimated viewing systems. But optical see-through HMDs do mostly not have an equivalent focus compared to the distance of the pilot's eye-point position to the curved screen, which is also dependant on head motion. Hence, a dynamic vergence correction has been implemented to avoid binocular disparity. In addition, the parallax error induced by even small translational head motions is corrected with a head-tracking system to be adjusted onto the projected screen. For this purpose, two options are presented. The correction can be achieved by rendering the view with yaw and pitch offset angles dependent on the deviating head position from the design eye-point of the spherical projection system. Furthermore, it can be solved by implementing a dynamic eye-point in the multi-channel projection system for the outside visual cues. Both options have been investigated for the integration of a binocular HMD into the Rotorcraft Simulation Environment (ROSIE) at the Technische Universitaet Muenchen. Pros and cons of both possibilities with regard on integration issues and usability in flight simulations will be discussed.

Transitional Boundary Layers Under the Influence of High Free Stream Turbulence, Intensive Wall Cooling and High Pressure Gradients in Hot Gas Circulation. Ph.D. Thesis - Technische Hochschule, Karlsruhe, 1985

NASA Technical Reports Server (NTRS)

Rued, Klaus

1987-01-01

The requirements for fundamental experimental studies of the influence of free stream turbulence, pressure gradients and wall cooling are discussed. Under turbine-like free stream conditions, comprehensive tests of transitional boundary layers with laminar, reversing and turbulent flow increments were performed to decouple the effects of the parameters and to determine the effects during mutual interaction.

Preface: phys. stat. sol. (c) 1/8

NASA Astrophysics Data System (ADS)

Amann, Markus C.

2004-07-01

In this special issue of physica status solidi (c) we have included 10 invited papers reviewing the current state-of-the-art and the progress achieved in materials science, semiconductor theory, novel physical mechanisms and advanced device concepts in the field of nanostructured electronic and optoelectronic semiconductor devices. All of these papers were written by previous members of the Collaborative Research Centre 348 Nanometer-Halbleiterbauelemente: Grundlagen - Konzepte - Realisierungen (Nanometer Semiconductor Devices: Fundamentals - Concepts - Realisations), which was funded by the German Research Foundation (Deutsche Forschungsgemeinschaft, DFG) during the period from 1991 to 2003. In these twelve years, the researchers in this programme have carried an intense activity directed towards two main objectives. First of all, Fundamentals and Concepts of nanostructure devices and their technology were explored theoretically and experimentally including the effects of low-dimensional structures on carrier transport, optical properties and spin, as well as the enabling epitaxial and nanostructure technologies such as the cleaved-edge-overgrowth technique and the self-assembled growth of quantum dots. A second field of interest was focused towards the design and development of Novel Semiconductor Devices exploiting nanostructure technology. This comprises optical detectors and memories with nanometer lateral dimensions, microwave detectors and sources up to the 300 GHz regime, innovative tunable and surface-emitting semiconductor lasers for the wavelength range 0.9 to 2 m, and nitride-based resonant tunnelling diodes. Some of the device innovations have meanwhile become commercial products proving also the practical importance of this research area. The articles in this special issue relate to the projects of the last three-years' funding period from 2000 to 2003 and are organized along these two We would like to thank the numerous reviewers for their valuable

Seismic Investigation of the Glacier de la Plaine Morte, Switzerland

NASA Astrophysics Data System (ADS)

Laske, Gabi; Lindner, Fabian; Walter, Fabian; Krage, Manuel

2017-04-01

Glacier de la Plaine Morte is a plateau glacier along the border between Valais and Berne cantons. It covers a narrow elevation range and is extremely vulnerable to climate change. During snow melt, it feeds three marginal lakes that have experienced sudden subglacial drainage in recent years, thereby causing flooding in the Simme Valley below. Of greatest concern is Lac des Faverges at the southeastern end of the glacier that has drained near the end of July in recent years, with flood levels reaching capacity of flood control systems downstream. The lake levels are carefully monitored but precise prediction has not yet been achieved. In the search for precursory ice fracturing to the lake drainage to improve forecast, four seismic arrays comprised of five short-period borehole seismometers provided by Eidgenössische Technische Hochschule (ETH), Zürich as well as fifteen 3-component geophones from the Geophysical Instrument Pool Potsdam (GIPP) collected continuous seismic data for about seven weeks during the summer of 2016. We present initial results on discharge dynamics as well as changing noise levels and seismicity before, during and after the drainage of Lac des Faverges. Compared to previous recent years, the 2016 drainage of Lac des Faverges occurred unusually late on August 28. With an aperture between 100 and 200 m, the small arrays recorded many hundred ice quakes per day. A majority of the events exhibits clearly dispersed, high-frequency Rayleigh waves at about 10 Hz and higher. A wide distribution of events allows us to study azimuthal anisotropy and its relationship with the orientation of glacial crevasses.

Direct determination of k Q factors for cylindrical and plane-parallel ionization chambers in high-energy electron beams from 6 MeV to 20 MeV.

PubMed

Krauss, A; Kapsch, R-P

2018-02-06

For the ionometric determination of the absorbed dose to water, D w , in high-energy electron beams from a clinical accelerator, beam quality dependent correction factors, k Q , are required. By using a water calorimeter, these factors can be determined experimentally and potentially with lower standard uncertainties than those of the calculated k Q factors, which are tabulated in various dosimetry protocols. However, one of the challenges of water calorimetry in electron beams is the small measurement depths in water, together with the steep dose gradients present especially at lower energies. In this investigation, water calorimetry was implemented in electron beams to determine k Q factors for different types of cylindrical and plane-parallel ionization chambers (NE2561, NE2571, FC65-G, TM34001) in 10 cm  ×  10 cm electron beams from 6 MeV to 20 MeV (corresponding beam quality index R 50 ranging from 1.9 cm to 7.5 cm). The measurements were carried out using the linear accelerator facility of the Physikalisch-Technische Bundesanstalt. Relative standard uncertainties for the k Q factors between 0.50% for the 20 MeV beam and 0.75% for the 6 MeV beam were achieved. For electron energies above 8 MeV, general agreement was found between the relative electron energy dependencies of the k Q factors measured and those derived from the AAPM TG-51 protocol and recent Monte Carlo-based studies, as well as those from other experimental investigations. However, towards lower energies, discrepancies of up to 2.0% occurred for the k Q factors of the TM34001 and the NE2571 chamber.

Titanisierung von Implantatoberflächen

NASA Astrophysics Data System (ADS)

Zimmermann, Hanngörg; Heinlein, Markus; Guldner, Norbert W.

Titan gilt seit Jahrzehnten als einer der wichtigsten Implantatwerkstoffe in der Medizin. Neben den guten mechanischen Eigenschaften (Leichtigkeit, hohe Festigkeit etc.), besitzen Titanimplantate vor allem eine hervorragende Körperverträglichkeit, so dass die Implantate optimal in den humanen Organismus integriert werden [1]. Ist jedoch aufgrund der Anforderungen an das Implantat eine hohe Flexibilität und/ oder Elastizität gefragt, so scheidet der Werkstoff Titan aufgrund seiner spröden und unflexiblen Materialeigenschaften aus. Die Folge ist der Einsatz von Implantatmaterialien, sowohl künstlichen als auch biologischen Ursprungs, welche nicht selten eine unzureichende Biokompatibilität aufweisen und somit zu Fremdköper- und immunologischen Reaktionen und Einkapselung des Implantates führen können. Die Erhöhung der Körperverträglichkeit, eine Adaption an das biologische Umfeld und eine hohe Biokompatibilität sind demzufolge die wichtigsten Eigenschaften bei der bedarfsgerechten Herstellung von Implantaten und Implantatoberflächen. Zur Gestaltung von innovativen, biokompatiblen Oberflächen stehen unterschiedliche technische Lösungsansätze zur Verfügung. Zum einen besteht die Möglichkeit, geeignete Oberflächeneigenschaften aus dem Grundmaterial selbst zu optimieren. Dies geschieht unter anderem durch Modifikation der Werkstoffoberflächen in Form von Texturierungen und Oberflächenrauhigkeiten. Zum anderen können die Oberflächeneigenschaften unabhängig von denen des Trägermaterials gestaltet werden. Durch Funktionalisierung der Oberflächen mit geeigneten Beschichtungen oder der Zugabe von Medikamenten (Drug Eluting) werden die Kunststoffimplantate dahingehend verändert, dass eine Steigerung der Körperakzeptanz erreicht wird. Die Titanbeschichtung von Implantatoberflächen kombiniert die positiven Materialeigenschaften von Titan und Polymer.

TUM Critical Zone Observatory, Germany

NASA Astrophysics Data System (ADS)

Völkel, Jörg; Eden, Marie

2014-05-01

Founded 2011 the TUM Critical Zone Observatory run by the Technische Universität München and partners abroad is the first CZO within Germany. TUM CZO is both, a scientific as well as an education project. It is a watershed based observatory, but moving behind this focus. In fact, two mountainous areas are integrated: (1) The Ammer Catchment area as an alpine and pre alpine research area in the northern limestone Alps and forelands south of Munich; (2) the Otter Creek Catchment in the Bavarian Forest with a crystalline setting (Granite, Gneiss) as a mid mountainous area near Regensburg; and partly the mountainous Bavarian Forest National Park. The Ammer Catchment is a high energy system as well as a sensitive climate system with past glacial elements. The lithology shows mostly carbonates from Tertiary and Mesozoic times (e.g. Flysch). Source-to-sink processes are characteristic for the Ammer Catchment down to the last glacial Ammer Lake as the regional erosion and deposition base. The consideration of distal depositional environments, the integration of upstream and downstream landscape effects are characteristic for the Ammer Catchment as well. Long term datasets exist in many regards. The Otter Creek catchment area is developed in a granitic environment, rich in saprolites. As a mid mountainous catchment the energy system is facing lower stage. Hence, it is ideal comparing both of them. Both TUM CZO Catchments: The selected catchments capture the depositional environment. Both catchment areas include historical impacts and rapid land use change. Crosscutting themes across both sites are inbuilt. Questions of ability to capture such gradients along climosequence, chronosequence, anthroposequence are essential.

Patient trajectories and their impact on mobility, social participation and quality of life in patients with vertigo/dizziness/balance disorders and osteoarthritis (MobilE-TRA): study protocol of an observational, practice-based cohort study

PubMed Central

Kisch, Rebecca; Bergmann, Antje; Koller, Daniela; Leidl, Reiner; Mansmann, Ulrich; Mueller, Martin; Sanftenberg, Linda; Schelling, Joerg; Sundmacher, Leonie; Voigt, Karen; Grill, Eva

2018-01-01

Introduction Mobility limitations have a multitude of different negative consequences on elderly patients including decreasing opportunities for social participation, increasing the risk for morbidity and mortality. However, current healthcare has several shortcomings regarding mobility sustainment of older adults, namely a narrow focus on the underlying pathology, fragmentation of care across services and health professions and deficiencies in personalising care based on patients’ needs and experiences. A tailored healthcare strategy targeted at mobility of older adults is still missing. Objective The objective is to develop multiprofessional care pathways targeted at mobility sustainment and social participation in patients with vertigo/dizziness/balance disorders (VDB) and osteoarthritis (OA). Methods Data regarding quality of life, mobility limitation, pain, stiffness and physical function is collected in a longitudinal observational study between 2017 and 2019. General practitioners (GPs) recruit their patients with VDB or OA. Patients who visited their GP in the last quarter will be identified in the practice software based on VDB and OA-related International Classification of Diseases 10th Revision. Study material will be sent from the practice to patients by mail. Six months and 12 months after baseline, all patients will receive a mail directly from the study team containing the follow-up questionnaire. GPs fill out questionnaires regarding patient diagnostics, therapy and referrals. Ethics and dissemination The study was approved by the ethical committee of the Ludwig-Maximilians-Universität München and of the Technische Universität Dresden. Results will be published in scientific, peer-reviewed journals and at national and international conferences. Results will be disseminated via newsletters, the project website and a regional conference for representatives of local and national authorities. PMID:29680815

Reference air kerma rate calibration system for high dose rate Ir-192 brachytherapy sources in Taiwan

NASA Astrophysics Data System (ADS)

Chu, Wei-Han; Yuan, Ming-Chen; Lee, Jeng-Hung; Lin, Yi-Chun

2017-11-01

Ir-192 sources are widely used in brachytherapy and the number of treatments is around seven thousand for the use of the high dose rate (HDR) Ir-192 brachytherapy source per year in Taiwan. Due to its physical half-life of 73.8 days, the source should be replaced four times per year to maintain the HDR treatment mode (DDEP, 2005; Coursey et al., 1992). When doing this work, it must perform the source dose trace to assure the dose accuracy. To establish the primary measurement standard of reference air kerma rate(RAKR) for the HDR Ir-192 brachytherapy sources in Taiwan, the Institute of Nuclear Energy Research (INER) fabricated a dual spherical graphite-walled cavity ionization chambers system to directly measure the RAKR of the Ir-192 brachytherapy source. In this system, the ion-charge was accumulated by the two ionization chambers and after correction for the ion recombination, temperature, atmosphere pressure, room scattering, graphite-wall attenuation, air attenuation, source decay, stem effect, and so on. The RAKR of the Ir-192 source was obtained in the ambient conditions of 22 °C and one atmosphere. The measurement uncertainty of the system was around 0.92% in 96% confidence level (k=2.0). To verify the accuracy of the result, the source calibration comparison has been made at the National Radiation Standard Laboratory (NRSL) of INER and Physikalisch-Technische Bundesanstalt (PTB, Germany) in 2015. The ratio of the measurement results between INER and PTB, INER/PTB, was 0.998±0.027 (k=2) which showed good consistency and the performance of the system was verified.

Goniochromatic and sparkle properties of effect pigmented samples in multidimensional configuration

NASA Astrophysics Data System (ADS)

Höpe, Andreas; Hauer, Kai-Olaf; Teichert, Sven; Hünerhoff, Dirk; Strothkämper, Christian

2015-03-01

The effects of goniochromatism and sparkle are gaining more and more interest for surface refinement applications driven by demanding requirements from such different branches as automotive, cosmetics, printing and packaging industry. The common background and intention in all of these implementations is improvement of the visual appearance of the related commercial products. Goniochromatic materials show strong angular-dependent reflection characteristics and hence a color impression depending on the effective spatial arrangement of illumination and observation relative to the surface of the artifact. Sparkle is a texture related effect giving a surface which is irradiated directionally, like direct sun light, a bright glittering effect, similar to twinkling stars at the night sky. The prototype for this new effect is the Xirallic® pigment of MERCK KGaA, Germany. The same pigment shows in diffuse irradiation, like on a cloudy day, a different visual effect called graininess (coarseness) which appears as a granular structure of the surface. Both effects were studied on especially manufactured samples of a dilution series in pigment concentration and a tonality series with carbon black. The experiments were carried out with the robot-based gonioreflectometer and integrating sphere facilities at Physikalisch-Technische Bundesanstalt (PTB) in multidimensional configurations of directional and diffuse irradiation. The research is part of the European Metrology Research Program (EMRP), which is a metrology-focused program of coordinated Research & Development (R&D) funded by the European Commission and participating countries within the European Association of National Metrology Institutes (EURAMET). More information and updated news concerning the project can be found on the xD-Reflect website http://www.xdreflect.eu/.

Absolute radiant power measurement for the Au M lines of laser-plasma using a calibrated broadband soft X-ray spectrometer with flat-spectral response.

PubMed

Troussel, Ph; Villette, B; Emprin, B; Oudot, G; Tassin, V; Bridou, F; Delmotte, F; Krumrey, M

2014-01-01

CEA implemented an absolutely calibrated broadband soft X-ray spectrometer called DMX on the Omega laser facility at the Laboratory for Laser Energetics (LLE) in 1999 to measure radiant power and spectral distribution of the radiation of the Au plasma. The DMX spectrometer is composed of 20 channels covering the spectral range from 50 eV to 20 keV. The channels for energies below 1.5 keV combine a mirror and a filter with a coaxial photo-emissive detector. For the channels above 5 keV the photoemissive detector is replaced by a conductive detector. The intermediate energy channels (1.5 keV < photon energy < 5 keV) use only a filter and a coaxial detector. A further improvement of DMX consists in flat-response X-ray channels for a precise absolute measurement of the photon flux in the photon energy range from 0.1 keV to 6 keV. Such channels are equipped with a filter, a Multilayer Mirror (MLM), and a coaxial detector. We present as an example the development of channel for the gold M emission lines in the photon energy range from 2 keV to 4 keV which has been successfully used on the OMEGA laser facility. The results of the radiant power measurements with the new MLM channel and with the usual channel composed of a thin titanium filter and a coaxial detector (without mirror) are compared. All elements of the channel have been calibrated in the laboratory of the Physikalisch-Technische Bundesanstalt, Germany's National Metrology Institute, at the synchrotron radiation facility BESSY II in Berlin using dedicated well established and validated methods.

Direct determination of k Q factors for cylindrical and plane-parallel ionization chambers in high-energy electron beams from 6 MeV to 20 MeV

NASA Astrophysics Data System (ADS)

Krauss, A.; Kapsch, R.-P.

2018-02-01

For the ionometric determination of the absorbed dose to water, D w, in high-energy electron beams from a clinical accelerator, beam quality dependent correction factors, k Q, are required. By using a water calorimeter, these factors can be determined experimentally and potentially with lower standard uncertainties than those of the calculated k Q factors, which are tabulated in various dosimetry protocols. However, one of the challenges of water calorimetry in electron beams is the small measurement depths in water, together with the steep dose gradients present especially at lower energies. In this investigation, water calorimetry was implemented in electron beams to determine k Q factors for different types of cylindrical and plane-parallel ionization chambers (NE2561, NE2571, FC65-G, TM34001) in 10 cm  ×  10 cm electron beams from 6 MeV to 20 MeV (corresponding beam quality index R 50 ranging from 1.9 cm to 7.5 cm). The measurements were carried out using the linear accelerator facility of the Physikalisch-Technische Bundesanstalt. Relative standard uncertainties for the k Q factors between 0.50% for the 20 MeV beam and 0.75% for the 6 MeV beam were achieved. For electron energies above 8 MeV, general agreement was found between the relative electron energy dependencies of the k Q factors measured and those derived from the AAPM TG-51 protocol and recent Monte Carlo-based studies, as well as those from other experimental investigations. However, towards lower energies, discrepancies of up to 2.0% occurred for the k Q factors of the TM34001 and the NE2571 chamber.

Determination of line profiles on nano-structured surfaces using EUV and x-ray scattering

NASA Astrophysics Data System (ADS)

Soltwisch, Victor; Wernecke, Jan; Haase, Anton; Probst, Jürgen; Schoengen, Max; Krumrey, Michael; Scholze, Frank; Pomplun, Jan; Burger, Sven

2014-09-01

Non-imaging techniques like X-ray scattering are supposed to play an important role in the further development of CD metrology for the semiconductor industry. Grazing Incidence Small Angle X-ray Scattering (GISAXS) provides directly assessable information on structure roughness and long-range periodic perturbations. The disadvantage of the method is the large footprint of the X-ray beam on the sample due to the extremely shallow angle of incidence. This can be overcome by using wavelengths in the extreme ultraviolet (EUV) spectral range, EUV small angle scattering (EUVSAS), which allows for much steeper angles of incidence but preserves the range of momentum transfer that can be observed. Generally, the potentially higher momentum transfer at shorter wavelengths is counterbalanced by decreasing diffraction efficiency. This results in a practical limit of about 10 nm pitch for which it is possible to observe at least the +/- 1st diffraction orders with reasonable efficiency. At the Physikalisch-Technische Bundesanstalt (PTB), the available photon energy range extends from 50 eV up to 10 keV at two adjacent beamlines. PTB commissioned a new versatile Ellipso-Scatterometer which is capable of measuring 6" square substrates in a clean, hydrocarbon-free environment with full flexibility regarding the direction of the incident light polarization. The reconstruction of line profiles using a geometrical model with six free parameters, based on a finite element method (FEM) Maxwell solver and a particle swarm based least-squares optimization yielded consistent results for EUV-SAS and GISAXS. In this contribution we present scatterometry data for line gratings and consistent reconstruction results of the line geometry for EUV-SAS and GISAXS.

Application of advanced shearing techniques to the calibration of autocollimators with small angle generators and investigation of error sources.

PubMed

Yandayan, T; Geckeler, R D; Aksulu, M; Akgoz, S A; Ozgur, B

2016-05-01

The application of advanced error-separating shearing techniques to the precise calibration of autocollimators with Small Angle Generators (SAGs) was carried out for the first time. The experimental realization was achieved using the High Precision Small Angle Generator (HPSAG) of TUBITAK UME under classical dimensional metrology laboratory environmental conditions. The standard uncertainty value of 5 mas (24.2 nrad) reached by classical calibration method was improved to the level of 1.38 mas (6.7 nrad). Shearing techniques, which offer a unique opportunity to separate the errors of devices without recourse to any external standard, were first adapted by Physikalisch-Technische Bundesanstalt (PTB) to the calibration of autocollimators with angle encoders. It has been demonstrated experimentally in a clean room environment using the primary angle standard of PTB (WMT 220). The application of the technique to a different type of angle measurement system extends the range of the shearing technique further and reveals other advantages. For example, the angular scales of the SAGs are based on linear measurement systems (e.g., capacitive nanosensors for the HPSAG). Therefore, SAGs show different systematic errors when compared to angle encoders. In addition to the error-separation of HPSAG and the autocollimator, detailed investigations on error sources were carried out. Apart from determination of the systematic errors of the capacitive sensor used in the HPSAG, it was also demonstrated that the shearing method enables the unique opportunity to characterize other error sources such as errors due to temperature drift in long term measurements. This proves that the shearing technique is a very powerful method for investigating angle measuring systems, for their improvement, and for specifying precautions to be taken during the measurements.

[Concerning the crisis of the West German politics of limit values in the 1970s: the transformation of cancer at the workplace from a toxicological into a socioeconomic problem].

PubMed

Bächi, Beat

2010-12-01

The paper tackles the changes that occurred in the political culture and the episteme of risk in the Federal Republic of Germany in the 1970s. The objects of observation are limit values for hazardous industrial materials, especially for carcinogens. At the forefront of the production of such values in Germany was the German Research Society's Senate Commission for the Examination of Hazardous Industrial Materials. Limit values bring economy, politics, and science together and they mediate different interests. This makes limit values an ideal object of study to bring together changes in different parts of society. In 1972, a new category of limit values for carcinogenic substances is introduced, the so called "Technische Richtkonzentration" (TRK). This category of values does not assume that complete safety can be reached, as do limit values for hazardous industrial materials, so called "Maximale Arbeitsplatzkonzentrationen" (MAK). This means an important rupture in toxicological thinking. Until the 1970s, Paracelsus' dictum about dosage and poison still served as starting point for toxicologists. The innovation of TRK marks an important rupture in the episteme of regulating dangerous matters. Whereas until the 1970s there existed, at least as an ideal, the myth of "no risk" or "zero tolerance" even in the case of carcinogens, since the beginning of the 1970s, certainty is no more guaranteed by epistemically, but by socially robust knowledge. This also means the return of the risk society at the beginning of the 1970s, whereby cancer at the workplace becomes--in the view of the regulatory bodies--out of a medical problem a socioeconomic illness. The paper argues that these changes are connected to a general feeling of disorientation.

EDITORIAL: Greetings from the new Editor-in-Chief Greetings from the new Editor-in-Chief

NASA Astrophysics Data System (ADS)

Nielsch, Kornelius

2012-01-01

-review, with the aim to raise the quality of our content, three years later the number of published articles has remained stable at around 220 per year, whilst the number of downloads and citations to the journal has grown. In 2011, three topical issues have been published, on: (Nano)characterization of semiconductor materials and structures (Guest Editor: Alberta Bonanni, University of Linz, Austria) Flexible OLEDs and organic electronics (Guest Editors: Jang-Joo Kim, Min-Koo Han, Cambridge University, UK, and Yong-Young Noh, Seoul National University, Korea) From heterostructures to nanostructures: an 80th birthday tribute to Zhores Alferov (Guest Editor: Dieter Bimberg, Technische Universität Berlin, Germany) For the coming years, I will strongly support that the number of published topical issues will continue on the same level or slightly rise. SST has planned the publication of the following topical issues for 2012: Non-polar and semipolar nitride semiconductors (Guest Editors: Jung Han, Yale University, USA, and Michael Kneissl, Technische Universität Berlin, Germany) Topological insulators (Guest Editors: Alberto Morpurgo, Université de Genève, Switzerland and Björn Trauzettel, Universität Basel, Switzerland) Atomic layer deposition (Guest Editor: Marek Godlewski, Polish Academy of Sciences, Poland) 50th Anniversary of the laser diode (Guest Editors: Mike Adams, Univeristy of Essex, UK and Stephane Calvez, University of Strathclyde, UK) In addition to the traditional topics of SST, I as Editor-in-chief, strongly support and welcome the submission of manuscripts on organic semiconductors, topological insulators, semiconductor nanostructures for photovoltaic, solid-state lighting and energy harvesting, IC application beyond Moore's law and fundamental works on semiconductors based on abundant materials. I am extremely optimistic about the future of SST. I believe that we will raise the standards of acceptance while maintaining the short time from submission to

Englisch Klasse 7: 1. Bericht Uber die audio-linguale Konzeption, 2. The Nature of the Curriculum for the Eighties and Onwards (Grade 7 English: 1. A Report on the Audiolingual Concept).

ERIC Educational Resources Information Center

Freudenstein, Reinhold; Habel, Hans-Gunther

This report consists of two papers devoted to the learning of English in the comprehensive high schools of Hessia, West Germany. The first paper discusses a study which suggests replacement of traditional methods by an audiolingual approach. A catalog of learning goals supplants outdated curriculums, thereby ensuring a stepwise progression of…

New blackbody standard for the evaluation and calibration of tympanic ear thermometers at the NPL, United Kingdom

NASA Astrophysics Data System (ADS)

McEvoy, Helen C.; Simpson, Robert; Machin, Graham

2004-04-01

The use of infrared tympanic thermometers for monitoring patient health is widespread. However, studies into the performance of these thermometers have questioned their accuracy and repeatability. To give users confidence in these devices, and to provide credibility in the measurements, it is necessary for them to be tested using an accredited, standard blackbody source, with a calibration traceable to the International Temperature Scale of 1990 (ITS-90). To address this need the National Physical Laboratory (NPL), UK, has recently set up a primary ear thermometer calibration (PET-C) source for the evaluation and calibration of tympanic (ear) thermometers over the range from 15 °C to 45 °C. The overall uncertainty of the PET-C source is estimated to be +/- 0.04 °C at k = 2. The PET-C source meets the requirements of the European Standard EN 12470-5: 2003 Clinical thermometers. It consists of a high emissivity blackbody cavity immersed in a bath of stirred liquid. The temperature of the blackbody is determined using an ITS-90 calibrated platinum resistance thermometer inserted close to the rear of the cavity. The temperature stability and uniformity of the PET-C source was evaluated and its performance validated. This paper provides a description of the PET-C along with the results of the validation measurements. To further confirm the performance of the PET-C source it was compared to the standard ear thermometer calibration sources of the National Metrology Institute of Japan (NMIJ), Japan and the Physikalisch-Technische Bundesanstalt (PTB), Germany. The results of this comparison will also be briefly discussed. The PET-C source extends the capability for testing ear thermometers offered by the NPL body temperature fixed-point source, described previously. An update on the progress with the commercialisation of the fixed-point source will be given.

Broad-band efficiency calibration of ITER bolometer prototypes using Pt absorbers on SiN membranes.

PubMed

Meister, H; Willmeroth, M; Zhang, D; Gottwald, A; Krumrey, M; Scholze, F

2013-12-01

The energy resolved efficiency of two bolometer detector prototypes for ITER with 4 channels each and absorber thicknesses of 4.5 μm and 12.5 μm, respectively, has been calibrated in a broad spectral range from 1.46 eV up to 25 keV. The calibration in the energy range above 3 eV was performed against previously calibrated silicon photodiodes using monochromatized synchrotron radiation provided by five different beamlines of Physikalische Technische Bundesanstalt at the electron storage rings BESSY II and Metrology Light Source in Berlin. For the measurements in the visible range, a setup was realised using monochromatized halogen lamp radiation and a calibrated laser power meter as reference. The measurements clearly demonstrate that the efficiency of the bolometer prototype detectors in the range from 50 eV up to ≈6 keV is close to unity; at a photon energy of 20 keV the bolometer with the thick absorber detects 80% of the photons, the one with the thin absorber about 50%. This indicates that the detectors will be well capable of measuring the plasma radiation expected from the standard ITER scenario. However, a minimum absorber thickness will be required for the high temperatures in the central plasma. At 11.56 keV, the sharp Pt-L3 absorption edge allowed to cross-check the absorber thickness by fitting the measured efficiency to the theoretically expected absorption of X-rays in a homogeneous Pt-layer. Furthermore, below 50 eV the efficiency first follows the losses due to reflectance expected for Pt, but below 10 eV it is reduced further by a factor of 2 for the thick absorber and a factor of 4 for the thin absorber. Most probably, the different histories in production, storage, and operation led to varying surface conditions and additional loss channels.

Analysis of Radiation-Induced Chromosomal Aberrations on a Cell-by-Cell Basis after Alpha-Particle Microbeam Irradiation: Experimental Data and Simulations.

PubMed

Testa, Antonella; Ballarini, Francesca; Giesen, Ulrich; Gil, Octávia Monteiro; Carante, Mario P; Tello, John; Langner, Frank; Rabus, Hans; Palma, Valentina; Pinto, Massimo; Patrono, Clarice

2018-06-01

There is a continued need for further clarification of various aspects of radiation-induced chromosomal aberration, including its correlation with radiation track structure. As part of the EMRP joint research project, Biologically Weighted Quantities in Radiotherapy (BioQuaRT), we performed experimental and theoretical analyses on chromosomal aberrations in Chinese hamster ovary cells (CHO-K1) exposed to α particles with final energies of 5.5 and 17.8 MeV (absorbed doses: ∼2.3 Gy and ∼1.9 Gy, respectively), which were generated by the microbeam at the Physikalisch-Technische Bundesanstalt (PTB) in Braunschweig, Germany. In line with the differences in linear energy transfer (approximately 85 keV/μm for 5.5 MeV and 36 keV/μm for 17.8 MeV α particles), the 5.5 MeV α particles were more effective than the 17.8 MeV α particles, both in terms of the percentage of aberrant cells (57% vs. 33%) and aberration frequency. The yield of total aberrations increased by a factor of ∼2, although the increase in dicentrics plus centric rings was less pronounced than in acentric fragments. The experimental data were compared with Monte Carlo simulations based on the BIophysical ANalysis of Cell death and chromosomal Aberrations model (BIANCA). This comparison allowed interpretation of the results in terms of critical DNA damage [cluster lesions (CLs)]. More specifically, the higher aberration yields observed for the 5.5 MeV α particles were explained by taking into account that, although the nucleus was traversed by fewer particles (nominally, 11 vs. 25), each particle was much more effective (by a factor of ∼3) at inducing CLs. This led to an increased yield of CLs per cell (by a factor of ∼1.4), consistent with the increased yield of total aberrations observed in the experiments.

The subjective experience of collaboration in interprofessional tutor teams: A qualitative study.

PubMed

Weber, Tobias; Hoffmann, Henriette

2016-01-01

The Center for Interprofessional Training in Medicine at the Faculty of Medicine Carl Gustav Carus at the Technische Universität Dresden, Germany, has offered courses covering interprofessional material since the winter semester 2014/15. The unusual feature of these courses is that they are co-taught by peer tutors from medicine and nursing. This study investigates the subjective experiences of these tutors during the collaborative preparation and teaching of these tutorials with the aim of identifying the effects of equal participation in the perceptions and assessments of the other professional group. Semi-structured, guideline-based interviews were held with six randomly selected tutors. The interviews were analyzed using structuring content analysis. The results show that collaborative work led to reflection, mostly by the university student tutors, on the attitudes held. However, the co-tutors from each professional group were perceived to different degrees as being representative of those in their profession. Asked to master a shared assignment in a non-clinical context, the members of the different professional groups met on equal footing, even if the medical students had already gathered more teaching experience and thus mostly assumed a mentoring role over the course of working on and realizing the teaching units. The nursing tutors were primarily focused on their role as tutor. Both professional groups emphasized that prior to the collaboration they had an insufficient or no idea about the theoretical knowledge or practical skills of the other professional group. Overall, the project was rated as beneficial, and interprofessional education was endorsed. In the discussion, recommendations based on the insights are made for joint tutor training of both professional groups. According to these recommendations, harmonizing the teaching abilities of all tutors is essential to ensure equality during cooperation. Ideally, training programs should be attended

Feasibility study of entrance and exit dose measurements at the contra lateral breast with alanine/electron spin resonance dosimetry in volumetric modulated radiotherapy of breast cancer

NASA Astrophysics Data System (ADS)

Wagner, Daniela M.; Hüttenrauch, Petra; Anton, Mathias; von Voigts-Rhetz, Philip; Zink, Klemens; Wolff, Hendrik A.

2017-07-01

The Physikalisch-Technische Bundesanstalt has established a secondary standard measurement system for the dose to water, D W, based on alanine/ESR (Anton et al 2013 Phys. Med. Biol. 58 3259-82). The aim of this study was to test the established measurement system for the out-of-field measurements of inpatients with breast cancer. A set of five alanine pellets were affixed to the skin of each patient at the contra lateral breast beginning at the sternum and extending over the mammilla to the distal surface. During 28 fractions with 2.2 Gy per fraction, the accumulated dose was measured in four patients. A cone beam computer tomography (CBCT) scan was generated for setup purposes before every treatment. The reference CT dataset was registered rigidly and deformably to the CBCT dataset for 28 fractions. To take the actual alanine pellet position into account, the dose distribution was calculated for every fraction using the Acuros XB algorithm. The results of the ESR measurements were compared to the calculated doses. The maximum dose measured at the sternum was 19.9 Gy  ±  0.4 Gy, decreasing to 6.8 Gy  ±  0.2 Gy at the mammilla and 4.5 Gy  ±  0.1 Gy at the distal surface of the contra lateral breast. The absolute differences between the calculated and measured doses ranged from  -1.9 Gy to 0.9 Gy. No systematic error could be seen. It was possible to achieve a combined standard uncertainty of 1.63% for D W  =  5 Gy for the measured dose. The alanine/ESR method is feasible for in vivo measurements.

Determination of the active volumes of solid-state photon-beam dosimetry detectors using the PTB proton microbeam.

PubMed

Poppinga, Daniela; Delfs, Bjoern; Meyners, Jutta; Langner, Frank; Giesen, Ulrich; Harder, Dietrich; Poppe, Bjoern; Looe, Hui K

2018-05-04

This study aims at the experimental determination of the diameters and thicknesses of the active volumes of solid-state photon-beam detectors for clinical dosimetry. The 10 MeV proton microbeam of the PTB (Physikalisch-Technische Bundesanstalt, Braunschweig) was used to examine two synthetic diamond detectors, type microDiamond (PTW Freiburg, Germany), and the silicon detectors Diode E (PTW Freiburg, Germany) and Razor Diode (Iba Dosimetry, Germany). The knowledge of the dimensions of their active volumes is essential for their Monte Carlo simulation and their applications in small-field photon-beam dosimetry. The diameter of the active detector volume was determined from the detector current profile recorded by radially scanning the proton microbeam across the detector. The thickness of the active detector volume was determined from the detector's electrical current, the number of protons incident per time interval and their mean stopping power in the active volume. The mean energy of the protons entering this volume was assessed by comparing the measured and the simulated influence of the thickness of a stack of aluminum preabsorber foils on the detector signal. For all detector types investigated, the diameters measured for the active volume closely agreed with the manufacturers' data. For the silicon Diode E detector, the thickness determined for the active volume agreed with the manufacturer's data, while for the microDiamond detectors and the Razor Diode, the thicknesses measured slightly exceeded those stated by the manufacturers. The PTB microbeam facility was used to analyze the diameters and thicknesses of the active volumes of photon dosimetry detectors for the first time. A new method of determining the thickness values with an uncertainty of ±10% was applied. The results appear useful for further consolidating detailed geometrical knowledge of the solid-state detectors investigated, which are used in clinical small-field photon-beam dosimetry. �

Electronic Structure and Morphology of Graphene Layers on SiC

NASA Astrophysics Data System (ADS)

Ohta, Taisuke

2008-03-01

Recent years have witnessed the discovery and the unique electronic properties of graphene, a sheet of carbon atoms arranged in a honeycomb lattice. The unique linear dispersion relation of charge carriers near the Fermi level (``Dirac Fermions'') lead to exciting transport properties, such as an unusual quantum Hall effect, and have aroused scientific and technological interests. On the way towards graphene-based electronics, a knowledge of the electronic band structure and the morphology of epitaxial graphene films on silicon carbide substrates is imperative. We have studied the evolution of the occupied band structure and the morphology of graphene layers on silicon carbide by systematically increasing the layer thickness. Using angle-resolved photoemission spectroscopy (ARPES), we examine this unique 2D system in its development from single layer to multilayers, by characteristic changes in the π band, the highest occupied state, and the dispersion relation in the out-of-plane electron wave vector in particular. The evolution of the film morphology is evaluated by the combination of low-energy electron microscopy and ARPES. By exploiting the sensitivity of graphene's electronic states to the charge carrier concentration, changes in the on-site Coulomb potential leading to a change of π and π* bands can be examined using ARPES. We demonstrate that, in a graphene bilayer, the gap between π and π* bands can be controlled by selectively adjusting relative carrier concentrations, which suggests a possible application of the graphene bilayer for switching functions in electronic devices. This work was done in collaboration with A. Bostwick, J. L. McChesney, and E. Rotenberg at Advanced Light Source, Lawrence Berkeley National Laboratory, K. Horn at Fritz-Haber-Institut, K. V. Emtsev and Th. Seyller at Lehrstuhl für Technische Physik, Universität Erlangen-Nürnberg, and F. El Gabaly and A. K. Schmid at National Center for Electron Microscopy, Lawrence Berkeley

Relationships between atmospheric circulation indices and rainfall in Northern Algeria and comparison of observed and RCM-generated rainfall

NASA Astrophysics Data System (ADS)

Taibi, S.; Meddi, M.; Mahé, G.; Assani, A.

2017-01-01

This work aims, as a first step, to analyze rainfall variability in Northern Algeria, in particular extreme events, during the period from 1940 to 2010. Analysis of annual rainfall shows that stations in the northwest record a significant decrease in rainfall since the 1970s. Frequencies of rainy days for each percentile (5th, 10th, 25th, 50th, 75th, 90th, 95th, and 99th) and each rainfall interval class (1-5, 5-10, 10-20, 20-50, and ≥50 mm) do not show a significant change in the evolution of daily rainfall. The Tenes station is the only one to show a significant decrease in the frequency of rainy days up to the 75th percentile and for the 10-20-mm interval class. There is no significant change in the temporal evolution of extreme events in the 90th, 95th, and 99th percentiles. The relationships between rainfall variability and general atmospheric circulation indices for interannual and extreme event variability are moderately influenced by the El Niño-Southern Oscillation and Mediterranean Oscillation. Significant correlations are observed between the Southern Oscillation Index and annual rainfall in the northwestern part of the study area, which is likely linked with the decrease in rainfall in this region. Seasonal rainfall in Northern Algeria is affected by the Mediterranean Oscillation and North Atlantic Oscillation in the west. The ENSEMBLES regional climate models (RCMs) are assessed using the bias method to test their ability to reproduce rainfall variability at different time scales. The Centre National de Recherches Météorologiques (CNRM), Czech Hydrometeorological Institute (CHMI), Eidgenössische Technische Hochschule Zürich (ETHZ), and Forschungszentrum Geesthacht (GKSS) models yield the least biased results.

[Benchmark experiment to verify radiation transport calculations for dosimetry in radiation therapy].

PubMed

Renner, Franziska

2016-09-01

Monte Carlo simulations are regarded as the most accurate method of solving complex problems in the field of dosimetry and radiation transport. In (external) radiation therapy they are increasingly used for the calculation of dose distributions during treatment planning. In comparison to other algorithms for the calculation of dose distributions, Monte Carlo methods have the capability of improving the accuracy of dose calculations - especially under complex circumstances (e.g. consideration of inhomogeneities). However, there is a lack of knowledge of how accurate the results of Monte Carlo calculations are on an absolute basis. A practical verification of the calculations can be performed by direct comparison with the results of a benchmark experiment. This work presents such a benchmark experiment and compares its results (with detailed consideration of measurement uncertainty) with the results of Monte Carlo calculations using the well-established Monte Carlo code EGSnrc. The experiment was designed to have parallels to external beam radiation therapy with respect to the type and energy of the radiation, the materials used and the kind of dose measurement. Because the properties of the beam have to be well known in order to compare the results of the experiment and the simulation on an absolute basis, the benchmark experiment was performed using the research electron accelerator of the Physikalisch-Technische Bundesanstalt (PTB), whose beam was accurately characterized in advance. The benchmark experiment and the corresponding Monte Carlo simulations were carried out for two different types of ionization chambers and the results were compared. Considering the uncertainty, which is about 0.7 % for the experimental values and about 1.0 % for the Monte Carlo simulation, the results of the simulation and the experiment coincide. Copyright © 2015. Published by Elsevier GmbH.

Cybathlon experiences of the Graz BCI racing team Mirage91 in the brain-computer interface discipline.

PubMed

Statthaler, Karina; Schwarz, Andreas; Steyrl, David; Kobler, Reinmar; Höller, Maria Katharina; Brandstetter, Julia; Hehenberger, Lea; Bigga, Marvin; Müller-Putz, Gernot

2017-12-28

In this work, we share our experiences made at the world-wide first CYBATHLON, an event organized by the Eidgenössische Technische Hochschule Zürich (ETH Zürich), which took place in Zurich in October 2016. It is a championship for severely motor impaired people using assistive prototype devices to compete against each other. Our team, the Graz BCI Racing Team MIRAGE91 from Graz University of Technology, participated in the discipline "Brain-Computer Interface Race". A brain-computer interface (BCI) is a device facilitating control of applications via the user's thoughts. Prominent applications include assistive technology such as wheelchairs, neuroprostheses or communication devices. In the CYBATHLON BCI Race, pilots compete in a BCI-controlled computer game. We report on setting up our team, the BCI customization to our pilot including long term training and the final BCI system. Furthermore, we describe CYBATHLON participation and analyze our CYBATHLON result. We found that our pilot was compliant over the whole time and that we could significantly reduce the average runtime between start and finish from initially 178 s to 143 s. After the release of the final championship specifications with shorter track length, the average runtime converged to 120 s. We successfully participated in the qualification race at CYBATHLON 2016, but performed notably worse than during training, with a runtime of 196 s. We speculate that shifts in the features, due to the nonstationarities in the electroencephalogram (EEG), but also arousal are possible reasons for the unexpected result. Potential counteracting measures are discussed. The CYBATHLON 2016 was a great opportunity for our student team. We consolidated our theoretical knowledge and turned it into practice, allowing our pilot to play a computer game. However, further research is required to make BCI technology invariant to non-task related changes of the EEG.

Can near-peer medical students effectively teach a new curriculum in physical examination?

PubMed Central

2013-01-01

Background Students in German medical schools frequently complain that the subject ‘clinical examination’ is not taught in a satisfying manner due to time constraints and lack of personnel resources. While the effectiveness and efficiency of practice-oriented teaching in small groups using near-peer teaching has been shown, it is rarely used in German medical schools. We investigated whether adding a new near-peer teaching course developed with student input plus patient examination under supervision in small groups improves basic clinical examination skills in third year medical students compared to a traditional clinical examination course alone. Methods Third year medical students registered for the mandatory curricular clinical examination course at the medical faculty of the Technische Universität München were invited to participate in a randomised trial with blinded outcome assessment. Students were randomised to the control group participating in the established curricular physical examination course or to the intervention group, which received additional near-peer teaching for the same content. The learning success was verified by a voluntary objective structured clinical examination (OSCE). Results A total of 84 students were randomised and 53 (63%) participated in the final OSCE. Students in the control group scored a median of 57% (25th percentile 47%, 75th percentile 61%) of the maximum possible total points of the OSCE compared to 77% (73%, 80%; p < 0.001) for students in the intervention group. Only two students in the intervention group received a lower score than the best student in the control group. Conclusion Adding a near-peer teaching course to the routine course significantly improved the clinical examination skills of medical students in an efficient manner in the context of a resource-constrained setting. PMID:24325639

Utilization of coincidence criteria in absolute length measurements by optical interferometry in vacuum and air

NASA Astrophysics Data System (ADS)

Schödel, R.

2015-08-01

Traceability of length measurements to the international system of units (SI) can be realized by using optical interferometry making use of well-known frequencies of monochromatic light sources mentioned in the Mise en Pratique for the realization of the metre. At some national metrology institutes, such as Physikalisch-Technische Bundesanstalt (PTB) in Germany, the absolute length of prismatic bodies (e.g. gauge blocks) is realized by so-called gauge-block interference comparators. At PTB, a number of such imaging phase-stepping interference comparators exist, including specialized vacuum interference comparators, each equipped with three highly stabilized laser light sources. The length of a material measure is expressed as a multiple of each wavelength. The large number of integer interference orders can be extracted by the method of exact fractions in which the coincidence of the lengths resulting from the different wavelengths is utilized as a criterion. The unambiguous extraction of the integer interference orders is an essential prerequisite for correct length measurements. This paper critically discusses coincidence criteria and their validity for three modes of absolute length measurements: 1) measurements under vacuum in which the wavelengths can be identified with the vacuum wavelengths, 2) measurements under air in which the air refractive index is obtained from environmental parameters using an empirical equation, and 3) measurements under air in which the air refractive index is obtained interferometrically by utilizing a vacuum cell placed along the measurement pathway. For case 3), which corresponds to PTB’s Kösters-Comparator for long gauge blocks, the unambiguous determination of integer interference orders related to the air refractive index could be improved by about a factor of ten when an ‘overall dispersion value,’ suggested in this paper, is used as coincidence criterion.

List of Participants

NASA Astrophysics Data System (ADS)

Bombaci, I.; Covello, A.; Marcucci, L. E.; Rosati, S.

2009-07-01

Armani Paolo (Università di Trento) Benhar Omar (INFN Roma) Bombaci Ignazio (Università di Pisa) Bonanno Luca (Università di Ferrara) Catara Francesco (Università di Catania) Cò Giampaolo (Università di Lecce) Colonna Maria (Laboratori Nazionali del Sud, INFN Catania) Colonna Nicola (INFN Bari) Conti Francesco (Università di Pavia) Coraggio Luigi (INFN Napoli) Covello Aldo (Università di Napoli) Cristoforetti Marco (Technische Universität München, Germania) Cuofano Carmine (Università di Ferrara) Di Toro Massimo (Università di Catania) Drago Alessandro (Università di Ferrara) Faccioli Pietro (Università di Trento) Farina Nicola (INFN Roma) Finelli Paolo (Università di Bologna) Fiorentini Giovanni (Università di Ferrara) Fortunato Lorenzo (Università di Padova) Gambacurta Danilo (Università di Catania) Gandolfi Stefano (Università di Trento) Gargano Angela (INFN Napoli) Giannini Mauro (Università di Genova) Girlanda Luca (INFN Pisa) Giusti Carlotta (INFN Pavia) Illarionov Alexei (SISSA Trieste) Itaco Nunzio (Università di Napoli) Kievsky Alejandro (INFN Pisa) Lanza Edoardo (INFN Catania) Leidemann Winfried (Università di Trento) Lenzi Silvia (Università di Padova) Lipparini Enrico (Università di Trento) Lissia Marcello (Università di Cagliari) Lo Iudice Nicola (Università di Napoli) Maieron Chiara (Università di Lecce) Marcucci Laura Elisa (Università di Pisa) Matera Francesco (Università di Firenze) Millo Raffaele (Università di Trento) Orlandini Giuseppina (Università di Trento) Pacati Franco (Università di Pavia) Pastore Alessandro (Univeristy of Jyväskylä, Finlandia) Pederiva Francesco (Università di Trento) Pisent Gualtiero (Università di Padova) Prete Gianfranco (INFN Laboratori Nazionali di Legnaro) Quarati Piero (Politecnico di Torino) Rosati Sergio (Università di Pisa) Salmè Giovanni (INFN Roma) Santopinto Elena (INFN Genova) Traini Marco (Università di Trento) Vigezzi Enrico (INFN Milano) Vitturi Andrea (Universit

TIMED solar EUV experiment: preflight calibration results for the XUV photometer system

NASA Astrophysics Data System (ADS)

Woods, Thomas N.; Rodgers, Erica M.; Bailey, Scott M.; Eparvier, Francis G.; Ucker, Gregory J.

1999-10-01

The Solar EUV Experiment (SEE) on the NASA Thermosphere, Ionosphere, and Mesosphere Energetics and Dynamics (TIMED) mission will measure the solar vacuum ultraviolet (VUV) spectral irradiance from 0.1 to 200 nm. To cover this wide spectral range two different types of instruments are used: a grating spectrograph for spectra between 25 and 200 nm with a spectral resolution of 0.4 nm and a set of silicon soft x-ray (XUV) photodiodes with thin film filters as broadband photometers between 0.1 and 35 nm with individual bandpasses of about 5 nm. The grating spectrograph is called the EUV Grating Spectrograph (EGS), and it consists of a normal- incidence, concave diffraction grating used in a Rowland spectrograph configuration with a 64 X 1024 array CODACON detector. The primary calibrations for the EGS are done using the National Institute for Standards and Technology (NIST) Synchrotron Ultraviolet Radiation Facility (SURF-III) in Gaithersburg, Maryland. In addition, detector sensitivity and image quality, the grating scattered light, the grating higher order contributions, and the sun sensor field of view are characterized in the LASP calibration laboratory. The XUV photodiodes are called the XUV Photometer System (XPS), and the XPS includes 12 photodiodes with thin film filters deposited directly on the silicon photodiodes' top surface. The sensitivities of the XUV photodiodes are calibrated at both the NIST SURF-III and the Physikalisch-Technische Bundesanstalt (PTB) electron storage ring called BESSY. The other XPS calibrations, namely the electronics linearity and field of view maps, are performed in the LASP calibration laboratory. The XPS and solar sensor pre-flight calibration results are primarily discussed as the EGS calibrations at SURF-III have not yet been performed.

Evidence for a Solar Influence on Gamma Radiation from Radon

NASA Astrophysics Data System (ADS)

Sturrock, P. A.; Steinitz, G.; Fischbach, E.; Javorsek, D.; Jenkins, J.

2012-12-01

We have analyzed 29,000 measurements of gamma radiation associated with the decay of radon confined to an airtight vessel at the Geological Survey of Israel (GSI) Laboratory in Jerusalem between January 28 2007 and May 10 2010. These measurements exhibit strong variations in time of year and time of day, which may be due in part to environmental influences. However, time-series analysis reveals a number of strong periodicities, including two at approximately 11.2 year-1 and 12.5 year-1. We consider it significant that these same oscillations have previously been detected in nuclear-decay data acquired at the Brookhaven National Laboratory and at the Physiklisch-Technische Bundesanstalt. We have suggested that these oscillations are due to some form of solar radiation (possibly neutrinos) that has its origin in the deep solar interior. A curious property of the GSI data is that the annual oscillation is much stronger in daytime data than in nighttime data, but the opposite is true for all other oscillations. Time-frequency analysis also yields quite different results from daytime and nighttime data. These procedures have also been applied to data collected from subsurface geological sites in Israel, Tenerife, and Italy, which have a variety of geological and geophysical scenarios, different elevations, and depths below the surface ranging from several meters to 1000 meters. In view of these results, and in view of the fact that there is at present no clear understanding of the behavior of radon in its natural environment, there would appear to be a need for multi-disciplinary research. Investigations that clarify the nature and mechanisms of solar influences may help clarify the nature and mechanisms of geological influences.

Determination of lead equivalent values according to IEC 61331-1:2014—Report and short guidelines for testing laboratories

NASA Astrophysics Data System (ADS)

Büermann, L.

2016-09-01

Materials used for the production of protective devices against diagnostic medical X-radiation described in the international standard IEC 61331-3 need to be specified in terms of their lead attenuation equivalent thickness according to the methods described in IEC 61331-1. In May 2014 the IEC published the second edition of these standards which contain improved methods for the determination of attenuation ratios and the corresponding lead attenuation equivalent thicknesses of lead-reduced or lead-free materials. These methods include the measurement of scattered photons behind the protective material which were hitherto neglected but are becoming more important because of the increasing use of lead-reduced or even lead-free materials. They can offer the same protective effect but are up to 20% lighter and also easier to dispose of. The new method is based on attenuation ratios measured with the so-called ``inverse broad beam condition''. Since the corresponding measurement procedure is new and in some respects more complex than the methods used in the past, it was regarded as being helpful to have a description of how such measurements can reliably be performed. This technical report describes in detail the attenuation ratio measurements and corresponding procedures for the lead equivalent determinations of sample materials using the method with the inverse broad beam condition as carried out at the Physikalisch-Technische Bundesanstalt (PTB). PTB still offers material testing and certification for the German responsible notified body. In addition to the description of the measurements at PTB, a short technical guide is provided for testing laboratories which intend to establish this kind of protective material certification. The guide includes technical recommendations for the testing equipment like X-ray facilities, reference lead sheets and radiation detectors; special procedures for the determination of the lead attenuation equivalent thickness; their

Experimental determination of gravitomagnetic effects by means of ring lasers

NASA Astrophysics Data System (ADS)

Tartaglia, Angelo

2013-08-01

A new experiment aimed to the detection of the gravito-magnetic Lense-Thirring effect at the surface of the Earth will be presented; the name of the experiment is GINGER. The proposed technique is based on the behavior of light beams in ring-lasers, also known as gyrolasers. A three-dimensional array of ringlasers will be attached to a rigid "monument"; each ring will have a different orientation in space. Within the space-time of a rotating mass the propagation of light is indeed anisotropic; part of the anisotropy is purely kinematical (Sagnac effect), part is due to the interaction between the gravito-electric field of the source and the kinematical motion of the observer (de Sitter effect), finally there is a contribution from the gravito-magnetic component of the Earth (gravito-magnetic frame dragging or Lense-Thirring effect). In a ring-laser a light beam traveling counterclockwise is superposed to another beam traveling in the opposite sense. The anisotropy in the propagation leads to standing waves with slightly different frequencies in the two directions; the final effect is a beat frequency proportional to the size of the instrument and its effective rotation rate in space, including the gravito-magnetic drag. Current laser techniques and the performances of the best existing ring-lasers allow at the moment a sensitivity within one order of magnitude of the required accuracy for the detection of gravito-magnetic effects, so that the objective of GINGER is in the range of feasibility and aims to improve the sensitivity of a couple of orders of magnitude with respect to present. The experiment will be underground, probably in the Gran Sasso National Laboratories in Italy, and is based on an international collaboration among four Italian groups, the Technische Universität München and the University of Canterbury in Christchurch (NZ).

Planar millimeter wave radar frontend for automotive applications

NASA Astrophysics Data System (ADS)

Grubert, J.; Heyen, J.; Metz, C.; Stange, L. C.; Jacob, A. F.

2003-05-01

ührende theoretische Untersuchungen über die potenzielle Systemleistungsfähigkeit motiviert. Unter Berücksichtigung von kommerziell erhältlichenMMICs werden verschiedene Schaltungstopologien auf der Grundlage des Signal-Rausch-Verhältnisses verglichen. Sowohl für sequenzielle als auch für parallele Ansteuerung der Antennenkeulen wird eine deutliche Leistungssteigerung ermittelt. Diese Verbesserungen hängen maßgeblich von der Verfügbarkeit geeigneter MMICs und einer zuverlässigen Aufbau- und Verbindungstechnik ab. Das vorliegende Frontend-Konzept kann auf Grund seiner Flexibilität leicht an derlei zukünftige Entwicklungen angepasst werden.

Power estimation on functional level for programmable processors

NASA Astrophysics Data System (ADS)

Schneider, M.; Blume, H.; Noll, T. G.

2004-05-01

In diesem Beitrag werden verschiedene Ansätze zur Verlustleistungsschätzung von programmierbaren Prozessoren vorgestellt und bezüglich ihrer Übertragbarkeit auf moderne Prozessor-Architekturen wie beispielsweise Very Long Instruction Word (VLIW)-Architekturen bewertet. Besonderes Augenmerk liegt hierbei auf dem Konzept der sogenannten Functional-Level Power Analysis (FLPA). Dieser Ansatz basiert auf der Einteilung der Prozessor-Architektur in funktionale Blöcke wie beispielsweise Processing-Unit, Clock-Netzwerk, interner Speicher und andere. Die Verlustleistungsaufnahme dieser Bl¨ocke wird parameterabhängig durch arithmetische Modellfunktionen beschrieben. Durch automatisierte Analyse von Assemblercodes des zu schätzenden Systems mittels eines Parsers können die Eingangsparameter wie beispielsweise der erzielte Parallelitätsgrad oder die Art des Speicherzugriffs gewonnen werden. Dieser Ansatz wird am Beispiel zweier moderner digitaler Signalprozessoren durch eine Vielzahl von Basis-Algorithmen der digitalen Signalverarbeitung evaluiert. Die ermittelten Schätzwerte für die einzelnen Algorithmen werden dabei mit physikalisch gemessenen Werten verglichen. Es ergibt sich ein sehr kleiner maximaler Schätzfehler von 3%. In this contribution different approaches for power estimation for programmable processors are presented and evaluated concerning their capability to be applied to modern digital signal processor architectures like e.g. Very Long InstructionWord (VLIW) -architectures. Special emphasis will be laid on the concept of so-called Functional-Level Power Analysis (FLPA). This approach is based on the separation of the processor architecture into functional blocks like e.g. processing unit, clock network, internal memory and others. The power consumption of these blocks is described by parameter dependent arithmetic model functions. By application of a parser based automized analysis of assembler codes of the systems to be estimated the input

PREFACE: 31st European Physical Society Conference on Plasma Physics

NASA Astrophysics Data System (ADS)

Dendy, Richard

2004-12-01

chaired by Henry Hutchinson (RAL, Chilton), and to the Plasma Physics and Controlled Fusion journal team (Institute of Physics Publishing, Bristol), for their work on this conference. At the 2004 European Physical Society Conference on Plasma Physics, plenary invited speakers whose talks spanned the entire field were followed, each day, by multiple parallel sessions which also included invited talks. Invited speakers in both these categories were asked to contribute papers to this special issue (the contributed papers at this conference, and at all recent conferences in this series, are archived at http://epsppd.epfl.ch). The Programme Committee is very grateful to the many invited speakers who have responded positively to this request. Invited papers appear here in their order of presentation during the week beginning 28 June 2004; this ordering provides an echo of the character of the conference, as it was experienced by those who took part. Programme Committee 2004 Professor Richard Dendy UKAEA Culham Division, UK Chairman and guest editor Dr Jean-Luc Dorier Centre de Recherches en Physique des Plasmas, Lausanne, Switzerland (Co-ordinator of dusty plasmas and guest editor) Professor Jürgen Meyer-ter-Vehn Max-Planck-Institut für Quantenoptik, Garching, Germany (Co-ordinator of laser-plasma interaction and beam plasma physics and guest editor) Dr Peter Norreys Rutherford Appleton Laboratory, Chilton, UK (Scientific Secretary and guest editor) Dr Emilia R Solano CIEMAT Laboratorio Nacional de Fusión, Madrid, Spain ( Co-ordinator of magnetic confinement fusion and guest editor) Dr Shalom Eliezer Soreq Nuclear Research Centre, Israel Dr Wim Goedheer FOM-Instituut voor Plasmafysica, Rijnhuizen, Netherlands Professor Henry Hutchinson Rutherford Appleton Laboratory, Chilton, UK Professor John Kirk Max-Planck-Institut für Kernphysik, Heidelberg, Germany Dr Raymond Koch Ecole Royale Militaire/Koninklijke Militaire School, Brussels, Belgium Professor Gerrit Kroesen Technische

Capillary blood islet autoantibody screening for identifying pre-type 1 diabetes in the general population: design and initial results of the Fr1da study

PubMed Central

Raab, Jennifer; Haupt, Florian; Scholz, Marlon; Matzke, Claudia; Warncke, Katharina; Lange, Karin; Assfalg, Robin; Weininger, Katharina; Wittich, Susanne; Löbner, Stephanie; Beyerlein, Andreas; Nennstiel-Ratzel, Uta; Lang, Martin; Laub, Otto; Dunstheimer, Desiree; Bonifacio, Ezio; Achenbach, Peter; Winkler, Christiane; Ziegler, Anette-G

2016-01-01

Introduction Type 1 diabetes can be diagnosed at an early presymptomatic stage by the detection of islet autoantibodies. The Fr1da study aims to assess whether early staging of type 1 diabetes (1) is feasible at a population-based level, (2) prevents severe metabolic decompensation observed at the clinical manifestation of type 1 diabetes and (3) reduces psychological distress through preventive teaching and care. Methods and analysis Children aged 2–5 years in Bavaria, Germany, will be tested for the presence of multiple islet autoantibodies. Between February 2015 and December 2016, 100 000 children will be screened by primary care paediatricians. Islet autoantibodies are measured in capillary blood samples using a multiplex three-screen ELISA. Samples with ELISA results >97.5th centile are retested using reference radiobinding assays. A venous blood sample is also obtained to confirm the autoantibody status of children with at least two autoantibodies. Children with confirmed multiple islet autoantibodies are diagnosed with pre-type 1 diabetes. These children and their parents are invited to participate in an education and counselling programme at a local diabetes centre. Depression and anxiety, and burden of early diagnosis are also assessed. Results Of the 1027 Bavarian paediatricians, 39.3% are participating in the study. Overall, 26 760 children have been screened between February 2015 and November 2015. Capillary blood collection was sufficient in volume for islet autoantibody detection in 99.46% of the children. The remaining 0.54% had insufficient blood volume collected. Of the 26 760 capillary samples tested, 0.39% were positive for at least two islet autoantibodies. Discussion Staging for early type 1 diabetes within a public health setting appears to be feasible. The study may set new standards for the early diagnosis of type 1 diabetes and education. Ethics dissemination The study was approved by the ethics committee of Technische Universit

Introduction of a web portal for an Individual Health Management and observational health data sciences.

PubMed

Melchart, Dieter; Eustachi, Axel; Gronwald, Stephan; Wühr, Erich; Wifling, Kristina; Bachmeier, Beatrice E

2018-01-01

There is a global trend to a stronger active involvement of persons in the maintenance and restoring of health. The Competence Centre for Complementary Medicine and Naturopathy (CoCoNat) of the Technical University of Munich (TUM) has developed a lifestyle concept to enable each individual to manage his or her health - Individual Health Management (IHM) - and a web-based health portal named Virtual Tool for Education, Reporting, Information and Outcomes (VITERIO ® ), which addresses these needs for practice and research. The objectives of this study were to establish a core set of questionnaires for a self-assessment program on certain risk indications and comprehensive protection factors of health and to develop and enhance 1) tools for individual feedback, longitudinal self-monitoring, self-assessment, and (self-)care-planning; 2) training packages; 3) open notes and records for provider and patient; and 4) tools for monitoring groups and single participants in various indicators for individual coaching and scientific evaluation. The CoCoNat of TUM, Faculty for Applied Health Science of Technische Hochschule Deggendorf, VITERIO ® company, IHM campus network, and Erich Rothenfußer Foundation, Munich, provide a consortium responsible for content, research strategy, technical production and implication, postgraduate education for IHM coaches, implementation of IHM in various settings, and funding resources. A data set of indicators for health screening and self-monitoring of findings, symptoms, health behavior, and attitudes are integrated into a web-based health portal named VITERIO ® . The article introduces some implemented graphical solutions of developed tools and gives examples for daily use. Behavioral change and adaptation in attitudes and personal values are difficult issues of health education and lifestyle medicine. To address this problem best, the implementation of a patient-centric, performance measures-based program including open records and a

Final report on APMP.M.P-S4: Results of the bilateral supplementary comparison on pressure measurements in the range (60 to 350) kPa of gauge pressure in gas media

NASA Astrophysics Data System (ADS)

Priruenrom, T.; Sabuga, W.; Konczak, T.

2013-01-01

The bilateral supplementary comparison APMP.M.P-S4 on pressure measurements in the range (60 to 350) kPa of gauge pressure in gas media was organized by National Institute of Metrology of Thailand, NIMT, as the pilot laboratory, comparing with Physikalisch-Technische Bundesanstalt of Germany, PTB. The objective of this comparison is to check equivalence of gas pressure standards between NIMT and PTB. The period of measurement covered November to December 2012. NIMT provided a transfer standard, which was a WC-WC piston-cylinder assembly (PCA) with a nominal effective area of 10 cm2 manufactured by Fluke Corporation, DHI. The measurements were performed at pressures (60, 100, 150, 200, 250, 300 and 350) kPa. The NIMT laboratory standard used was a pressure balance with a PCA of 10 cm2 manufactured by DHI and identified by serial number 0693. The PTB laboratory standard used was a pressure balance with a PCA of 10 cm2 manufactured by Desgranges et Huot (DH) and identified by serial number 288. The results of this comparison show that the relative difference of the effective area values obtained by NIMT and PTB is not larger than 4.3 ppm, which corresponds to En = 0.26. Therefore, it confirms that the gas pressure standards maintained by the two institutes, NIMT and PTB, in the pressure range (60 to 350) kPa in gauge mode are equivalent under their uncertainties claimed. The result of this comparison is essential to support the calibration and measurement capabilities (CMC) of NIMT in this pressure range. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the APMP, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Specialised teams or personal continuity across inpatient and outpatient mental healthcare? Study protocol for a natural experiment.

PubMed

Giacco, Domenico; Bird, Victoria Jane; McCrone, Paul; Lorant, Vincent; Nicaise, Pablo; Pfennig, Andrea; Bauer, Michael; Ruggeri, Mirella; Lasalvia, Antonio; Moskalewicz, Jacek; Welbel, Marta; Priebe, Stefan

2015-11-25

Mental healthcare organisation can either pursue specialisation, that is, distinct clinicians and teams for inpatient and outpatient care or personal continuity of care, that is, the same primary clinician for a patient across the two settings. Little systematic research has compared these approaches. Existing studies subject have serious methodological shortcomings. Yet, costly reorganisations of services have been carried out in different European countries, inconsistently aiming to achieve specialisation or personal continuity of care. More reliable evidence is required on whether specialisation or continuity of care is more effective and cost-effective, and whether this varies for different patient groups and contexts. In a natural experiment, we aim to recruit at least 6000 patients consecutively admitted to inpatient psychiatric care in Belgium, Germany, Italy, Poland, and the UK. In each country, care approaches supporting specialisation and personal continuity coexist. Patients will be followed up at 1 year to compare outcomes, costs and experiences. Inclusion criteria are: 18 years of age or older; clinical diagnosis of psychosis, affective disorder or anxiety/somatisation disorder; sufficient command of the language of the host country; absence of cognitive deterioration and/or organic brain disorders; and capacity to provide informed consent. Ethical approval was obtained in all countries: (1) England: NRES Committee North East-Newcastle & North Tyneside (ref: 14/NE/1017); (2) Belgium: Comité d'Ethique hospitalo-facultaire des Cliniques St-Luc; (3) Germany: Ethical Board, Technische Universität Dresden; (4) Italy: Comitati Etici per la sperimentazione clinica (CESC) delle provincie di Verona, Rovigo, Vicenza, Treviso, Padova; (5) Poland: Komisja Bioetyczna przy Instytucie Psychiatrii i Neurologii w Warszawie. We will disseminate the findings through scientific publications and a study-specific website. At the end of the study, we will develop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schneider, T

Purpose: Since 2008 the Physikalisch-Technische Bundesanstalt (PTB) has been offering the calibration of {sup 125}I-brachytherapy sources in terms of the reference air-kerma rate (RAKR). The primary standard is a large air-filled parallel-plate extrapolation chamber. The measurement principle is based on the fact that the air-kerma rate is proportional to the increment of ionization per increment of chamber volume at chamber depths greater than the range of secondary electrons originating from the electrode x{sub 0}. Methods: Two methods for deriving the RAKR from the measured ionization charges are: (1) to determine the RAKR from the slope of the linear fit tomore » the so-called ’extrapolation curve’, the measured ionization charges Q vs. plate separations x or (2) to differentiate Q(x) and to derive the RAKR by a linear extrapolation towards zero plate separation. For both methods, correcting the measured data for all known influencing effects before the evaluation method is applied is a precondition. However, the discrepancy of their results is larger than the uncertainty given for the determination of the RAKR with both methods. Results: A new approach to derive the RAKR from the measurements is investigated as an alternative. The method was developed from the ground up, based on radiation transport theory. A conversion factor C(x{sub 1}, x{sub 2}) is applied to the difference of charges measured at the two plate separations x{sub 1} and x{sub 2}. This factor is composed of quotients of three air-kerma values calculated for different plate separations in the chamber: the air kerma Ka(0) for plate separation zero, and the mean air kermas at the plate separations x{sub 1} and x{sub 2}, respectively. The RAKR determined with method (1) yields 4.877 µGy/h, and with method (2) 4.596 µGy/h. The application of the alternative approach results in 4.810 µGy/h. Conclusion: The alternative method shall be established in the future.« less

Hydrogenation of benzaldehyde via electrocatalysis and thermal catalysis on carbon-supported metals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Song, Yang; Sanyal, Udishnu; Pangotra, Dhananjai

Abstract Selective reduction of benzaldehyde to benzyl alcohol on C-supported Pt, Rh, Pd, and Ni in aqueous phase was conducted using either directly H2 (thermal catalytic hydrogenation, TCH) or in situ electrocatalytically generated hydrogen (electrocatalytic hydrogenation, ECH). In TCH, the intrinsic activity of the metals at room temperature and 1 bar H2 increased in the sequence Rh/C < Pt/C < Pd/C, while Ni/C is inactive at these conditions due to surface oxidation in the absence of cathodic potential. The reaction follows a Langmuir-Hinshelwood mechanism with the second hydrogen addition to the adsorbed hydrocarbon being the rate-determining step. All tested metalsmore » were active in ECH of benzaldehyde, although hydrogenation competes with the hydrogen evolution reaction (HER). The minimum cathodic potentials to obtain appreciable ECH rates were identical to the onset potentials of HER. Above this onset, the relative rates of H reacting to H2 and H addition to the hydrocarbon determines the selectivity to ECH and TCH. Accordingly, the selectivity of the metals towards ECH increases in the order Ni/C < Pt/C < Rh/C < Pd/C. Pd/C shows exceptionally high ECH selectivity due to its surprisingly low HER reactivity under the reaction conditions. Acknowledgements The authors would like to thank the groups of Hubert A. Gasteiger at the Technische Universität München of Jorge Gascon at the Delft University of Technology for advice and valuable discussions. The authors are grateful to Nirala Singh, Erika Ember, Gary Haller, and Philipp Rheinländer for fruitful discussions. We are also grateful to Marianne Hanzlik for TEM measurements and to Xaver Hecht and Martin Neukamm for technical support. Y.S. would like to thank the Chinese Scholarship Council for the financial support. The research described in this paper is part of the Chemical Transformation Initiative at Pacific Northwest National Laboratory (PNNL), conducted under the Laboratory Directed Research and

PREFACE: Brazil MRS Meeting 2014

NASA Astrophysics Data System (ADS)

2015-11-01

The annual meetings, organized by the Brazilian materials research society - B-MRS, are amongst the most import discussion forums in the area of materials science and engineering in Brazil, with a growing interest from the national and international scientific society. In the last 4 years, more than 1,500 participants have attended the B-MRS meetings, promoting an auspicious environment for presentation and discussion of scientific and technological works in the materials science area. The XIII Brazilian Materials Research Society Meeting was held from 28 September to 02 October, 2014, in João Pessoa, PB, Brazil. The Meeting congregated more than 1650 participants from the whole of Brazil and from 28 other countries. More than 2100 abstracts were accepted for presentation, distributed along 19 Symposia following the format used in traditional meetings of Materials Research Societies. These involved topics such as: synthesis of new materials, computer simulations, optical, magnetic and electronic properties, traditional materials as clays and cements, advanced metals, carbon and graphene nanostructures, nanomaterials for nanostructures, energy storage systems, composites, surface engineering and others. A novelty was a symposium dedicated to innovation and technology transfer in materials research. The program also included 7 Plenary Lectures presented by internationally renowned researchers: Alberto Salleo from Stanford University, United States of America; Roberto Dovesi from Universita' degli Studi di Torino, Italy; Luís Antonio F. M. Dias Carlos from Universidade de Aveiro, Portugal; Jean Marie Dubois from Institut Jean-Lamour, France; Sir Colin Humphreys from University of Cambridge, England; Karl Leo from Technische Universität Dresden, Germany; Robert Chang from Northwestern University, Evanston, United States of America. The numbers of participants in the B-MRS meetings have been growing continuously, and in this meeting we had almost 2200 presentations

V-SUIT Model Validation Using PLSS 1.0 Test Results

NASA Technical Reports Server (NTRS)

Olthoff, Claas

2015-01-01

The dynamic portable life support system (PLSS) simulation software Virtual Space Suit (V-SUIT) has been under development at the Technische Universitat Munchen since 2011 as a spin-off from the Virtual Habitat (V-HAB) project. The MATLAB(trademark)-based V-SUIT simulates space suit portable life support systems and their interaction with a detailed and also dynamic human model, as well as the dynamic external environment of a space suit moving on a planetary surface. To demonstrate the feasibility of a large, system level simulation like V-SUIT, a model of NASA's PLSS 1.0 prototype was created. This prototype was run through an extensive series of tests in 2011. Since the test setup was heavily instrumented, it produced a wealth of data making it ideal for model validation. The implemented model includes all components of the PLSS in both the ventilation and thermal loops. The major components are modeled in greater detail, while smaller and ancillary components are low fidelity black box models. The major components include the Rapid Cycle Amine (RCA) CO2 removal system, the Primary and Secondary Oxygen Assembly (POS/SOA), the Pressure Garment System Volume Simulator (PGSVS), the Human Metabolic Simulator (HMS), the heat exchanger between the ventilation and thermal loops, the Space Suit Water Membrane Evaporator (SWME) and finally the Liquid Cooling Garment Simulator (LCGS). Using the created model, dynamic simulations were performed using same test points also used during PLSS 1.0 testing. The results of the simulation were then compared to the test data with special focus on absolute values during the steady state phases and dynamic behavior during the transition between test points. Quantified simulation results are presented that demonstrate which areas of the V-SUIT model are in need of further refinement and those that are sufficiently close to the test results. Finally, lessons learned from the modelling and validation process are given in combination

Capillary blood islet autoantibody screening for identifying pre-type 1 diabetes in the general population: design and initial results of the Fr1da study.

PubMed

Raab, Jennifer; Haupt, Florian; Scholz, Marlon; Matzke, Claudia; Warncke, Katharina; Lange, Karin; Assfalg, Robin; Weininger, Katharina; Wittich, Susanne; Löbner, Stephanie; Beyerlein, Andreas; Nennstiel-Ratzel, Uta; Lang, Martin; Laub, Otto; Dunstheimer, Desiree; Bonifacio, Ezio; Achenbach, Peter; Winkler, Christiane; Ziegler, Anette-G

2016-05-18

Type 1 diabetes can be diagnosed at an early presymptomatic stage by the detection of islet autoantibodies. The Fr1da study aims to assess whether early staging of type 1 diabetes (1) is feasible at a population-based level, (2) prevents severe metabolic decompensation observed at the clinical manifestation of type 1 diabetes and (3) reduces psychological distress through preventive teaching and care. Children aged 2-5 years in Bavaria, Germany, will be tested for the presence of multiple islet autoantibodies. Between February 2015 and December 2016, 100 000 children will be screened by primary care paediatricians. Islet autoantibodies are measured in capillary blood samples using a multiplex three-screen ELISA. Samples with ELISA results >97.5th centile are retested using reference radiobinding assays. A venous blood sample is also obtained to confirm the autoantibody status of children with at least two autoantibodies. Children with confirmed multiple islet autoantibodies are diagnosed with pre-type 1 diabetes. These children and their parents are invited to participate in an education and counselling programme at a local diabetes centre. Depression and anxiety, and burden of early diagnosis are also assessed. Of the 1027 Bavarian paediatricians, 39.3% are participating in the study. Overall, 26 760 children have been screened between February 2015 and November 2015. Capillary blood collection was sufficient in volume for islet autoantibody detection in 99.46% of the children. The remaining 0.54% had insufficient blood volume collected. Of the 26 760 capillary samples tested, 0.39% were positive for at least two islet autoantibodies. Staging for early type 1 diabetes within a public health setting appears to be feasible. The study may set new standards for the early diagnosis of type 1 diabetes and education. The study was approved by the ethics committee of Technische Universität München (Nr. 70/14). Published by the BMJ Publishing Group Limited. For

Final report on the torque key komparison CCM.T-K1.2 measurand torque: 0 N.m, 500 N.m, 1000 N.m

NASA Astrophysics Data System (ADS)

Röske, Dirk

2015-01-01

The purpose of the CIPM subsequent bilateral comparison CCM.T-K1.2 was to link another participant, namely the National Institute of Metrology (Thailand), in short NIMT, to the CCM.T-K1 torque key comparison. The measuring capabilities up to 1000 N.m of dead-weight torque standard machines with supported lever were investigated. The pilot laboratory was the same in both comparisons—it was the Physikalisch-Technische Bundesanstalt (PTB, Braunschweig, Germany). The same two very stable torque transducers with well-known properties were used as travelling standards. The measurements at the participating laboratory were carried out between November 2007 and February 2008. According to the technical protocol, torque steps of 500 N.m and 1000 N.m had to be measured both in clockwise and anticlockwise directions. Corrections had to be applied to the results reported by the participants taking into account the use of different amplifiers, the creep (due to different loading times of the machines) and the environmental conditions in the laboratories (temperature and relative humidity of the ambient air). The results of the pilot laboratory in this bilateral comparison are in very good agreement with the same results obtained in the CCM.T-K1 comparison. For each of the transducers, the two torque steps and both senses of direction of the torque vector, the key comparison reference value of the CCM.T-K1 was taken, and the results of participant NIMT were calculated with respect to these values. The agreement between the results is very good. The smallest expanded (k = 2) relative uncertainty of the machine stated by the participant is 1 × 10-4. The results of the comparison support this uncertainty statement. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by CCM, according

SU-E-T-195: Commissioning the Neutron Production of a Varian TrueBeam Linac

DOE Office of Scientific and Technical Information (OSTI.GOV)

Irazola, L; Brualla, L; Rosello, J

2015-06-15

Purpose: The purpose of this work is the characterization of a new Varian TrueBeam™ facility in terms of neutron production, in order to estimate neutron equivalent dose in organs during radiotherapy treatments. Methods: The existing methodology [1] was used with the reference SRAMnd detector, calibrated in terms of thermal neutron fluence at the reference field operated by PTB (Physikalisch-Technische-Bundesanstalt) at the GeNF (Geesthacht-Neutron-Facility) with the GKSS reactor FRG-1 [2]. Thermal neutron fluence for the 5 available possibilities was evaluated: 15 MV and 10&6 MV with and without Flattening Filter (FF and FFF, respectively). Irradiation conditions are as described in [3].more » In addition, three different collimator-MLC configurations were studied for 15 MV: (a) collimator of 10×10 cm{sup 2} and MLC fully retracted (reference), (b) field sizes of 20×20 cm{sup 2} and 10×10 cm{sup 2} for collimator and MLC respectively, and (c) collimator and MLC aperture of 10×10 cm{sup 2}. Results: Thermal fluence rate at the “reference point” [3], as a consequence of the neutron production, obtained for (a) conformation in 15 MV is (1.45±0.11) x10{sup 4} n•cm{sup 2}/MU. Configurations (b) and (c) gave fluences of 96.6% and 97.8% of the reference (a). Neutron production decreases up to 8.6% and 5.7% for the 10 MV FF and FFF beams, respectively. Finally, it decreases up to 2.8% and 0.1% for the 6 MV FF and FFF modes, respectively. Conclusion: This work evaluates thermal neutron production of Varian TrueBeam™ system for organ equivalent dose estimation. The small difference in collimator-MLC configuration shows the universality of the methodology [3]. A decrease in this production is shown when decreasing energy from 15 to 10 MV and an almost negligible production was found for 6 MV. Moreover, a lower neutron contribution is observed for the FFF modes.[1]Phys Med Biol,2012;57:6167–6191.[2]Radiat Meas,2010;45:1513–1517.[3]Med Phys,2015;42:276�

PREFACE: 13th International Workshop on Slow Positron Beam Techniques and Applications (SLOPOS13)

NASA Astrophysics Data System (ADS)

2014-04-01

These proceedings originate from the 13th International Workshop on Slow Positron Beam Techniques and Applications SLOPOS13 which was held at the campus of the Technische Universität München in Garching between 15th-20th September, 2013. This event is part of a series of triennial SLOPOS conferences. In total 123 delegates from 21 countries participated in the SLOPOS13. The excellent scientific program comprised 50 talks and 58 posters presented during two poster sessions. It was very impressive to learn about novel technical developments on positron beam facilities and the wide range of their applications all over the world. The workshop reflected the large variety of positron beam experiments covering fundamental studies, e.g., for efficient production of anti-hydrogen as well as applied research on defects in bulk materials, thin films, surfaces, and interfaces. The topics comprised: . Positron transport and beam technology . Pulsed beams and positron traps . Defect profiling in bulk and layered structures . Nanostructures, porous materials, thin films . Surfaces and interfaces . Positronium formation and emission . Positron interactions with atoms and molecules . Many positrons and anti-hydrogen . Novel experimental techniques The international advisory committee of SLOPOS awarded student prizes for the best presented scientific contributions to a team of students from Finland, France, and the NEPOMUC team at TUM. The conference was overshadowed by the sudden death of Professor Klaus Schreckenbach immediately before the workshop. In commemoration of him as a spiritus rectus of the neutron induced positron source a minutes' silence was hold. We are most grateful for the hard work of the Local Organising Committee, the help of the International Advisory Committee, and all the students for their friendly and efficient support during the meeting. The workshop could not have occurred without the generous support of the Heinz Maier-Leibnitz Zentrum (MLZ), Deutsche

Absolute Calibration of Si iRMs used for Measurements of Si Paleo-nutrient proxies

NASA Astrophysics Data System (ADS)

Vocke, R. D., Jr.; Rabb, S. A.

2016-12-01

Silicon isotope variations (reported as δ30Si and δ29Si, relative to NBS28) in silicic acid dissolved in ocean waters, in biogenic silica and in diatoms are extremely informative paleo-nutrient proxies. The resolution and comparability of such measurements depend on the quality of the isotopic Reference Materials (iRMs) defining the delta scale. We report new absolute Si isotopic measurements on the iRMs NBS28 (RM 8546 - Silica Sand), Diatomite, and Big Batch using the Avogadro measurement approach and comparing them with prior assessments of these iRMs. The Avogadro Si measurement technique was developed by the German Physikalish-Technische Bundesanstalt (PTB) to provide a precise and highly accurate method to measure absolute isotopic ratios in highly enriched 28Si (99.996%) material. These measurements are part of an international effort to redefine the kg and mole based on the Planck constant h and the Avogadro constant NA, respectively (Vocke et al., 2014 Metrologia 51, 361, Azuma et al., 2015 Metrologia 52 360). This approach produces absolute Si isotope ratio data with lower levels of uncertainty when compared to the traditional "Atomic Weights" method of absolute isotope ratio measurement calibration. This is illustrated in Fig. 1 where absolute Si isotopic measurements on SRM 990, separated by 40+ years of advances in instrumentation, are compared. The availability of this new technique does not say that absolute Si isotopic ratios are or ever will be better for normal Si isotopic measurements when seeking isotopic variations in nature, because they are not. However, by determining the absolute isotopic ratios of all the Si iRM scale artifacts, such iRMs become traceable to the metric system (SI); thereby automatically conferring on all the artifact-based δ30Si and δ29Si measurements traceability to the base SI unit, the mole. Such traceability should help reduce the potential of bias between different iRMs and facilitate the replacement of delta

PREFACE: The 395th Wilhelm and Else Heraeus Seminar: `Time-dependent phenomena in Quantum Mechanics'

NASA Astrophysics Data System (ADS)

Kleber, Manfred; Kramer, Tobias

2008-03-01

The 395th Wilhelm and Else Heraeus Seminar: `Time-dependent phenomena in Quantum Mechanics' took place at the Heinrich Fabri Institute in Blaubeuren, Germany, 12-16 September 2007. The conference covered a wide range of topics connected with time-dependent phenomena in quantum mechanical systems. The 20 invited talks and 15 short talks with posters at the workshop covered the historical debate between Schrödinger, Dirac and Pauli about the role of time in Quantum Mechanics (the debate was carried out sometimes in footnotes) up to the almost direct observation of electron dynamics on the attosecond time-scale. Semiclassical methods, time-delay, monodromy, variational principles and quasi-resonances are just some of the themes which are discussed in more detail in the papers. Time-dependent methods also shed new light on energy-dependent systems, where the detour of studying the time-evolution of a quantum states allows one to solve previously intractable problems. Additional information is available at the conference webpage http://www.quantumdynamics.de The organizer would like to thank all speakers, contributors, session chairs and referees for their efforts in making the conference a success. We also gratefully acknowledge the generous financial support from the Wilhelm and Else Heraeus Foundation for the conference and the production of this special volume of Journal of Physics: Conference Series. Manfred Kleber Physik Department T30, Technische Universität München, 85747 Garching, Germany mkleber@ph.tum.de Tobias Kramer Institut I: Theoretische Physik, Universität Regensburg, 93040 Regensburg, Germany tobias.kramer@physik.uni-regensburg.de Guest Editors Front row (from left): W Schleich, E J Heller, J B Delos, H Friedrich, K Richter, M Kleber, P Kramer, M Man'ko, A del Campo, V Man'ko, M Efremov, A Ruiz, M O Scully Middle row: A Zamora, R Aganoglu, T Kramer, J

[Integration of the functional signal of intraoperative EMG of the facial nerve in to navigation model for surgery of the petrous bone].

PubMed

Strauss, G; Strauss, M; Lüders, C; Stopp, S; Shi, J; Dietz, A; Lüth, T

2008-10-01

PROBLEM DEFINITION: The goal of this work is the integration of the information of the intraoperative EMG monitoring of the facial nerve into the radiological data of the petrous bone. The following hypotheses are to be examined: (I) the N. VII can be determined intraoperatively with a high reliability by the stimulation-probe. A computer program is able to discriminate true-positive EMG signals from false-positive artifacts. (II) The course of the facial nerve can be registered in a three-dimensional area by EMG signals at a nerve model in the lab test. The individual items of the nerve can be combined into a route model. The route model can be integrated into the data of digital volume tomography (DVT). (I) Intraoperative EMG signals of the facial nerve were classified at 128 measurements by an automatic software. The results were correlated with the actual intraoperative situation. (II) The nerve phantom was designed and a DVT data set was provided. Phantom was registered with a navigation system (Karl Storz NPU, Tuttlingen, Germany). The stimulation probe of the EMG-system was tracked by the navigation system. The navigation system was extended by a processing unit (MiMed, Technische Universität München, Germany). Thus the classified EMG parameters of the facial route can be received, processed and be generated to a model of the facial nerve route. The operability was examined at 120 (10 x 12) measuring points. The evaluation of the examined algorithm for classification EMG-signals of the facial nerve resulted as correct in all measuring events. In all 10 attempts it succeeded to visualize the nerve route as three-dimensional model. The different sizes of the individual measuring points reflect the appropriate values of Istim and UEMG correctly. This work proves the feasibility of an automatic classification of an intraoperative EMG signal of the facial nerve by a processing unit. Furthermore the work shows the feasibility of tracking of the position of the

Evaluating the impact of role-playing simulations on global competency in an online transnational engineering course

NASA Astrophysics Data System (ADS)

Wold, Kari

Successfully interacting with those from different cultures is essential to excel in any field, particularly when global, transnational collaborations in the workplace are increasingly common. However, many higher education students in engineering are not explicitly taught how to display the global competency skills desired by future employers. To display global competency skills means students must be able to visibly respect and recognize differences among those from different cultures. Global competency also means students must be able to show they can adjust their behaviors and integrate others' ideas when working with those with cultural backgrounds other than their own. While these skills are now deemed essential for future engineers, many institutions are struggling with determining which strategies and activities are universally effective to allow students to practice the global competency skills now crucial for success. Immersing engineering students in interactive role-playing simulations in transnational environments is one way institutions are encouraging students to illustrate and develop global competency skills. Role-playing simulations in transnational education provide environments where students adopt roles, interact with other students, and together explore and address realistic global problems. However, no studies have addressed whether or how role-playing simulations can help develop global competency in transnational engineering courses, students' perceptions regarding whether they change their abilities to display global competency in those environments, and their perspectives the effectiveness of using role-playing simulations for this purpose. To address this gap, this study assesses the impact of two subsequent role-playing simulations involving nuclear energy policy in a transnational course involving engineering students from the University of Virginia in Charlottesville, Virginia, and from Technische Universitat Dortmund in Dortmund

Magnesium Diboride Current Leads

NASA Technical Reports Server (NTRS)

Panek, John

2010-01-01

A recently discovered superconductor, magnesium diboride (MgB2), can be used to fabricate conducting leads used in cryogenic applications. Dis covered to be superconducting in 2001, MgB2 has the advantage of remaining superconducting at higher temperatures than the previously used material, NbTi. The purpose of these leads is to provide 2 A of electricity to motors located in a 1.3 K environment. The providing environment is a relatively warm 17 K. Requirements for these leads are to survive temperature fluctuations in the 5 K and 11 K heat sinks, and not conduct excessive heat into the 1.3 K environment. Test data showed that each lead in the assembly could conduct 5 A at 4 K, which, when scaled to 17 K, still provided more than the required 2 A. The lead assembly consists of 12 steelclad MgB2 wires, a tensioned Kevlar support, a thermal heat sink interface at 4 K, and base plates. The wires are soldered to heavy copper leads at the 17 K end, and to thin copper-clad NbTi leads at the 1.3 K end. The leads were designed, fabricated, and tested at the Forschungszentrum Karlsruhe - Institut foer Technische Physik before inclusion in Goddard's XRS (X-Ray Spectrometer) instrument onboard the Astro-E2 spacecraft. A key factor is that MgB2 remains superconducting up to 30 K, which means that it does not introduce joule heating as a resistive wire would. Because the required temperature ranges are 1.3-17 K, this provides a large margin of safety. Previous designs lost superconductivity at around 8 K. The disadvantage to MgB2 is that it is a brittle ceramic, and making thin wires from it is challenging. The solution was to encase the leads in thin steel tubes for strength. Previous designs were so brittle as to risk instrument survival. MgB2 leads can be used in any cryogenic application where small currents need to be conducted at below 30 K. Because previous designs would superconduct only at up to 8 K, this new design would be ideal for the 8-30 K range.

CAWR: Two institutions join forces in a cluster by addressing the grand challenges of water research

NASA Astrophysics Data System (ADS)

Jaeckel, Greta; Braeckevelt, Mareike

2017-04-01

The Center for Advanced Water Research (CAWR) brings together the water competences of two German research institutions: Helmholtz Centre for Environmental Research - UFZ and the Technische Universität Dresden (TUD). Highly qualified scientists are jointly tackling some of the key challenges in the water sector in an outstanding breadth of research topics and at the same time with a profound disciplinary expertise. Our mission is: "Save water for humans and environment", because water in a good quality and adequate quantity is a fundamental basis of life for humankind and the environment. In many global challenges, such as food or energy security, human health and ecosystems, flood defence and droughts or the provision of drinking water and sanitation systems, water is becoming a very critical element for a sustainable society in Germany, in Europe and worldwide. The CAWR focusses its work on the fields of research, education & training as well as transfer. The CAWR was established in 2013. Over 3 years the activities within the three pillars and the six thematic priority research fields ( 1) Understanding processes: water cycle and water quality, 2): Water quantity and scarcity in the regional context, 3): Urban Water Systems, 4): Methods of data collection and information processing, 5): Societal and climate change, 6): Water governance) were presented within: • the scientific community (newsletters, publication highlights, workshops with different new formats, conferences) • to national and international stakeholders from policy, industry and society (workshops, opinion papers) • public media (TV, radio stations, Newspapers, brochures, videoclips via youtube…) This PICO presentation by Greta Jäckel (scientific management of CAWR) should show which tools for the presentation of research results are useful and which influence they have on different target groups. A bunch of examples for effective and also less successful instruments to present important

AMISS - Active and passive MIcrowaves for Security and Subsurface imaging

NASA Astrophysics Data System (ADS)

Soldovieri, Francesco; Slob, Evert; Turk, Ahmet Serdar; Crocco, Lorenzo; Catapano, Ilaria; Di Matteo, Francesca

2013-04-01

The FP7-IRSES project AMISS - Active and passive MIcrowaves for Security and Subsurface imaging is based on a well-combined network among research institutions of EU, Associate and Third Countries (National Research Council of Italy - Italy, Technische Universiteit Delft - The Netherlands, Yildiz Technical University - Turkey, Bauman Moscow State Technical University - Russia, Usikov Institute for Radio-physics and Electronics and State Research Centre of Superconductive Radioelectronics "Iceberg" - Ukraine and University of Sao Paulo - Brazil) with the aims of achieving scientific advances in the framework of microwave and millimeter imaging systems and techniques for security and safety social issues. In particular, the involved partners are leaders in the scientific areas of passive and active imaging and are sharing their complementary knowledge to address two main research lines. The first one regards the design, characterization and performance evaluation of new passive and active microwave devices, sensors and measurement set-ups able to mitigate clutter and increase information content. The second line faces the requirements to make State-of-the-Art processing tools compliant with the instrumentations developed in the first line, suitable to work in electromagnetically complex scenarios and able to exploit the unexplored possibilities offered by new instrumentations. The main goals of the project are: 1) Development/improvement and characterization of new sensors and systems for active and passive microwave imaging; 2) Set up, analysis and validation of state of art/novel data processing approach for GPR in critical infrastructure and subsurface imaging; 3) Integration of state of art and novel imaging hardware and characterization approaches to tackle realistic situations in security, safety and subsurface prospecting applications; 4) Development and feasibility study of bio-radar technology (system and data processing) for vital signs detection and

Discussion of thermal extraction chamber concepts for Lunar ISRU

NASA Astrophysics Data System (ADS)

Pfeiffer, Matthias; Hager, Philipp; Parzinger, Stephan; Dirlich, Thomas; Spinnler, Markus; Sattelmayer, Thomas; Walter, Ulrich

The Exploration group of the Institute of Astronautics (LRT) of the Technische Universitüt a München focuses on long-term scenarios and sustainable human presence in space. One of the enabling technologies in this long-term perspective is in-situ resource utilization (ISRU). When dealing with the prospect of future manned missions to Moon and Mars the use of ISRU seems useful and intended. The activities presented in this paper focus on Lunar ISRU. This basically incorporates both the exploitation of Lunar oxygen from natural rock and the extraction of solar wind implanted particles (SWIP) from regolith dust. Presently the group at the LRT is examining possibilities for the extraction of SWIPs, which may provide several gaseous components (such as H2 and N2) valuable to a human presence on the Moon. As a major stepping stone in the near future a Lunar demonstrator/ verification experiment payload is being designed. This experiment, LUISE (LUnar ISru Experiment), will comprise a thermal process chamber for heating regolith dust (grain size below 500m), a solar thermal power supply, a sample distribution unit and a trace gas analysis. The first project stage includes the detailed design and analysis of the extraction chamber concepts and the thermal process involved in the removal of SWIP from Lunar Regolith dust. The technique of extracting Solar Wind volatiles from Regolith has been outlined by several sources. Heating the material to a threshold value seems to be the most reasonable approach. The present paper will give an overview over concepts for thermal extraction chambers to be used in the LUISE project and evaluate in detail the pros and cons of each concept. The special boundary conditions set by solar thermal heating of the chambers as well as the material properties of Regolith in a Lunar environment will be discussed. Both greatly influence the design of the extraction chamber. The performance of the chamber concepts is discussed with respect to the

Konzeption, Entwicklung und Evaluierung eines Messsystems zur sortenreinen Klassifikation von fluoreszenzcodierten Kunststoffen im Rahmen des Kunststoff-Recyclings(Conception, development and evaluation of a measuring system for the classification of fluorescence coded plastics within the framework of plastic recycling)

DTIC Science & Technology

2016-06-13

REPORT DOCUMENTATION PAGE 1 Form Approved OMB No. 0704-0 188 Public reporting burden for this collection of information is estimated to average 1...PRI CE CODE 19, SECURITY CLASSI FI CATI ON 20. LIM ITATION OF ABSTRACT OF ABSTRACT UNCLASSIFIED UL Standard Form 298 (Rev. 2-89) Prescribed by...Trennung komplexer Kunststoffmixturen in Form von typi- schem Kunststoffmahlgut ("Flakes") und insbesondere dunkler bzw. schwarzer Kunst- stoffe beseitigt

Committees

NASA Astrophysics Data System (ADS)

2012-11-01

Leadership Team of the IAHR Committee for Hydraulic Machinery and Systems Eduard EGUSQUIZA, UPC Barcelona, Spain, Chair François AVELLAN, EPFL-LMH, Switzerland, Past Chair Richard K FISHER, Voith Hydro Inc., USA, Past Chair Fidel ARZOLA, Edelca, Venezuela Michel COUSTON, Alstom Hydro, France Niklas DAHLBÄCKCK, Vatenfall, Sweden Normand DESY, Andritz VA TECH Hydro Ltd., Canada Chisachi KATO, University of Tokyo, Japan Andrei LIPEJ, Turboinstitut, Slovenija Torbjørn NIELSEN, NTNU, Norway Romeo SUSAN-RESIGA, 'Politehnica' University Timisoara, Romania Stefan RIEDELBAUCH, Stuggart University, Germany Albert RUPRECHT, Stuttgart University, Germany Qing-Hua SHI, Dong Fang Electrical Machinery Co., China Geraldo TIAGO, Universidade Federal de Itajubá, Brazil International Advisory Committee Shouqi YUAN (principal) Jiangsu University China QingHua SHI (principal) Dong Fang Electrical Machinery Co. China Fidel ARZOLA EDELCA Venezuela Thomas ASCHENBRENNER Voith Hydro GmbH & Co. KG Germany Anton BERGANT Litostroj Power doo Slovenia B C BHAOYAL Research & Technology Centre India Hermod BREKKE NTNU Norway Stuart COULSON Voith Hydro Inc. USA Paul COOPER Fluid Machinery Research Inc USA V A DEMIANOV Power Machines OJSC Russia Bart van ESCH Technische Universiteit Eindhoven Netherland Arno GEHRER Andritz Hydro Graz Austria Akira GOTO Ebara Corporation Japan Adiel GUINZBURG The Boeing Company USA D-H HELLMANN KSB AG Germany Ashvin HOSANGADI Combustion Research and Flow Technology USA Byung-Sun HWANG Korea Institute of Material Science Korea Toshiaki KANEMOTO Kyushu Institute of Technology Japan Mann-Eung KIM Korean Register of Shipping Korea Jiri KOUTNIK Voith Hydro GmbH & Co. KG Germany Jinkook LEE Eaton Corporation USA Young-Ho LEE Korea Maritime University Korea Woo-Seop LIM Hyosung Goodsprings Inc Korea Jun MATSUI Yokohama National University Japan Kazuyoshi Mitsubishi H I Ltd, Japan MIYAGAWA Christophe NICOLET Power Vision Engineering Srl Switzerland Maryse PAGE Hydro

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ebenau, Melanie, E-mail: melanie.ebenau@tu-dortmun

Purpose: Plastic scintillation detectors are promising candidates for the dosimetry of low- to medium-energy photons but quantitative knowledge of their energy response is a prerequisite for their correct use. The purpose of this study was to characterize the energy dependent response of small scintillation detectors (active volume <1 mm{sup 3}) made from the commonly used plastic scintillator BC400. Methods: Different detectors made from BC400 were calibrated at a number of radiation qualities ranging from 10 to 280 kV and at a {sup 60}Co beam. All calibrations were performed at the Physikalisch-Technische Bundesanstalt, the National Metrology Institute of Germany. The energymore » response in terms of air kerma, dose to water, and dose to the scintillator was determined. Conversion factors from air kerma to dose to water and to dose to the scintillator were derived from Monte Carlo simulations. In order to quantitatively describe the energy dependence, a semiempirical model known as unimolecular quenching or Birks’ formula was fitted to the data and from this the response to secondary electrons generated within the scintillator material BC400 was derived. Results: The detector energy response in terms of air kerma differs for different scintillator sizes and different detector casings. It is therefore necessary to take attenuation within the scintillator and in the casing into account when deriving the response in terms of dose to water from a calibration in terms of air kerma. The measured energy response in terms of dose to water for BC400 cannot be reproduced by the ratio of mean mass energy-absorption coefficients for polyvinyl toluene to water but shows evidence of quenching. The quenching parameter kB in Birks’ formula was determined to be kB = (12.3 ± 0.9) mg MeV{sup −1} cm{sup −2}. Conclusions: The energy response was quantified relative to the response to {sup 60}Co which is the common radiation quality for the calibration of therapy

Final report on CCQM-K70: Determination of Hg in natural water at a concentration level required by the European environmental quality standard (EQS)

NASA Astrophysics Data System (ADS)

Schiel, Detlef; Rienitz, Olaf

2011-01-01

This comparison 'Hg in natural water' was a follow-up to the pilot studies CCQM-P100.1 and CCQM-P100.2. The aim of this comparison was to demonstrate the capability of national metrology institutes to measure the Hg mass concentration in a natural water sample at the very low concentration level of γ(Hg) ≈ 70 ng/L as required by the EQS. In this way it served to help implement the European Water Framework Directive (WFD). This comparison was an activity of the Inorganic Analysis Working Group (IAWG) of CCQM and was piloted by Physikalisch-Technische Bundesanstalt (PTB, Braunschweig, Germany) with the help of the co-organizers Bundesanstalt für Materialforschung und -prüfung (BAM, Berlin, Germany), Laboratoire National de Métrologie et d'Essais (LNE, Paris, France), and the Joint Research Centre-Institute for Reference Materials and Measurements (EC-JRC-IRMM, Geel, Belgium). The following laboratories participated in this key comparison (in alphabetical order): BAM (Germany) EC-JRC-IRMM (European Union) KRISS (Republic of Korea) LGC (United Kingdom) LNE (France) NIST (United States of America) NMIA (Australia) NRC (Canada) PTB (Germany) SP (Sweden) The majority of participants applied isotope dilution mass spectrometry (IDMS) using sector field or quadrupole inductively coupled plasma MS (ICP-MS) in combination with cold vapour (CV) generation as the analytical technique. NRC reported a combined result of ID-CV-ICP-MS and CV atomic absorption spectrometry (CV-AAS). SP applied a standard addition method on a sector field ICP-MS, while BAM made use of an external 5-point calibration on a CV atomic fluorescence spectrometer (AFS). The key comparison reference value (KCRV) was agreed upon during the IAWG meeting in April 2010 at BIPM as the sum of the added Hg content calculated from the gravimetric sample preparation and the Hg matrix content of the water used for sample preparation (determined and validated on two independent pathways). Accordingly the degrees

A study of planar Richtmyer-Meshkov instability in fluids with Mie-Grüneisen equations of state

NASA Astrophysics Data System (ADS)

Ward, G. M.; Pullin, D. I.

2011-07-01

We present a numerical comparison study of planar Richtmyer-Meshkov instability with the intention of exposing the role of the equation of state. Results for Richtmyer-Meshkov instability in fluids with Mie-Grüneisen equations of state derived from a linear shock-particle speed Hugoniot relationship (Jeanloz, J. Geophys. Res. 94, 5873, 1989; McQueen et al., High Velocity Impact Phenomena (1970), pp. 294-417; Menikoff and Plohr, Rev. Mod. Phys. 61(1), 75 1989) are compared to those from perfect gases under nondimensionally matched initial conditions at room temperature and pressure. The study was performed using Caltech's Adaptive Mesh Refinement, Object-oriented C++ (AMROC) (Deiterding, Adaptive Mesh Refinement: Theory and Applications (2005), Vol. 41, pp. 361-372; Deiterding, "Parallel adaptive simulation of multi-dimensional detonation structures," Ph.D. thesis (Brandenburgische Technische Universität Cottbus, September 2003)) framework with a low-dissipation, hybrid, center-difference, limiter patch solver (Ward and Pullin, J. Comput. Phys. 229, 2999 (2010)). Results for single and triple mode planar Richtmyer-Meshkov instability when a reflected shock wave occurs are first examined for mid-ocean ridge basalt (MORB) and molybdenum modeled by Mie-Grüneisen equations of state. The single mode case is examined for incident shock Mach numbers of 1.5 and 2.5. The planar triple mode case is studied using a single incident Mach number of 2.5 with initial corrugation wavenumbers related by k1=k2+k3. Comparison is then drawn to Richtmyer-Meshkov instability in perfect gases with matched nondimensional pressure jump across the incident shock, post-shock Atwood ratio, post-shock amplitude-to-wavelength ratio, and time nondimensionalized by Richtmyer's linear growth time constant prediction. Differences in start-up time and growth rate oscillations are observed across equations of state. Growth rate oscillation frequency is seen to correlate directly to the oscillation

ERIS: preliminary design phase overview

NASA Astrophysics Data System (ADS)

Kuntschner, Harald; Jochum, Lieselotte; Amico, Paola; Dekker, Johannes K.; Kerber, Florian; Marchetti, Enrico; Accardo, Matteo; Brast, Roland; Brinkmann, Martin; Conzelmann, Ralf D.; Delabre, Bernard A.; Duchateau, Michel; Fedrigo, Enrico; Finger, Gert; Frank, Christoph; Rodriguez, Fernando G.; Klein, Barbara; Knudstrup, Jens; Le Louarn, Miska; Lundin, Lars; Modigliani, Andrea; Müller, Michael; Neeser, Mark; Tordo, Sebastien; Valenti, Elena; Eisenhauer, Frank; Sturm, Eckhard; Feuchtgruber, Helmut; George, Elisabeth M.; Hartl, Michael; Hofmann, Reiner; Huber, Heinrich; Plattner, Markus P.; Schubert, Josef; Tarantik, Karl; Wiezorrek, Erich; Meyer, Michael R.; Quanz, Sascha P.; Glauser, Adrian M.; Weisz, Harald; Esposito, Simone; Xompero, Marco; Agapito, Guido; Antichi, Jacopo; Biliotti, Valdemaro; Bonaglia, Marco; Briguglio, Runa; Carbonaro, Luca; Cresci, Giovanni; Fini, Luca; Pinna, Enrico; Puglisi, Alfio T.; Quirós-Pacheco, Fernando; Riccardi, Armando; Di Rico, Gianluca; Arcidiacono, Carmelo; Dolci, Mauro

2014-07-01

The Enhanced Resolution Imager and Spectrograph (ERIS) is the next-generation adaptive optics near-IR imager and spectrograph for the Cassegrain focus of the Very Large Telescope (VLT) Unit Telescope 4, which will soon make full use of the Adaptive Optics Facility (AOF). It is a high-Strehl AO-assisted instrument that will use the Deformable Secondary Mirror (DSM) and the new Laser Guide Star Facility (4LGSF). The project has been approved for construction and has entered its preliminary design phase. ERIS will be constructed in a collaboration including the Max- Planck Institut für Extraterrestrische Physik, the Eidgenössische Technische Hochschule Zürich and the Osservatorio Astrofisico di Arcetri and will offer 1 - 5 μm imaging and 1 - 2.5 μm integral field spectroscopic capabilities with a high Strehl performance. Wavefront sensing can be carried out with an optical high-order NGS Pyramid wavefront sensor, or with a single laser in either an optical low-order NGS mode, or with a near-IR low-order mode sensor. Due to its highly sensitive visible wavefront sensor, and separate near-IR low-order mode, ERIS provides a large sky coverage with its 1' patrol field radius that can even include AO stars embedded in dust-enshrouded environments. As such it will replace, with a much improved single conjugated AO correction, the most scientifically important imaging modes offered by NACO (diffraction limited imaging in the J to M bands, Sparse Aperture Masking and Apodizing Phase Plate (APP) coronagraphy) and the integral field spectroscopy modes of SINFONI, whose instrumental module, SPIFFI, will be upgraded and re-used in ERIS. As part of the SPIFFI upgrade a new higher resolution grating and a science detector replacement are envisaged, as well as PLC driven motors. To accommodate ERIS at the Cassegrain focus, an extension of the telescope back focal length is required, with modifications of the guider arm assembly. In this paper we report on the status of the

Optical characterisation of three reference Dobsons in the ATMOZ Project - verification of G. M. B. Dobson's original specifications

NASA Astrophysics Data System (ADS)

Köhler, Ulf; Nevas, Saulius; McConville, Glen; Evans, Robert; Smid, Marek; Stanek, Martin; Redondas, Alberto; Schönenborn, Fritz

2018-04-01

Three reference Dobsons (regional standard Dobsons No. 064, Germany and No. 074, Czech Republic as well as the world standard No. 083, USA) were optically characterized at the Physikalisch-Technische Bundesanstalt (PTB) in Braunschweig in 2015 and at the Czech Metrology Institute (CMI) in Prague in 2016 within the EMRP ENV 059 project Traceability for atmospheric total column ozone. Slit functions and the related parameters of the instruments were measured and compared with G. M. B. Dobson's specifications in his handbook. All Dobsons show a predominantly good match of the slit functions and the peak (centroid) wavelengths with deviations between -0.11 and +0.12 nm and differences of the full width half maximum (FWHM) between 0.13 and 0.37 nm compared to the nominal values at the shorter wavelengths. Slightly larger deviations of the FWHMs from the nominal Dobson data, up to 1.22 nm, can be seen at the longer wavelengths, especially for the slit function of the long D-wavelength. However, differences between the effective absorption coefficients (EACs) for ozone derived using Dobson's nominal values of the optical parameters on one hand and these measured values on the other hand are not too large in the case of both old Bass-Paur (BP) and new IUP-ozone (Institut für Umweltphysik, University of Bremen) absorption cross sections. Their inclusion in the calculation of the total ozone column (TOC) leads to improvements of significantly less than ±1 % at the AD-wavelengths between -1 and -2 % at the CD-wavelengths pairs in the BP-scale. The effect on the TOC in the IUP-scale is somewhat larger at the AD-wavelengths, up to +1 % (D074), and smaller at the CD-wavelengths pair, from -0.44 to -1.5 %. Beside this positive effect gained from the data with higher metrological quality that is needed for trend analyses and satellite validation, it will be also possible to explain uncommon behaviours of field Dobsons during calibration services, especially

Total Column Greenhouse Gas Monitoring in Central Munich: Automation and Measurements

NASA Astrophysics Data System (ADS)

Chen, Jia; Heinle, Ludwig; Paetzold, Johannes C.; Le, Long

2016-04-01

It is challenging to use in-situ surface measurements of CO2 and CH4 to derive emission fluxes in urban regions. Surface concentrations typically have high variance due to the influence of nearby sources, and they are strongly modulated by mesoscale transport phenomena that are difficult to simulate in atmospheric models. The integrated amount of a tracer through the whole atmosphere is a direct measure of the mass loading of the atmosphere given by emissions. Column measurements are insensitive to vertical redistribution of tracer mass, e.g. due to growth of the planetary boundary layer, and are also less influenced by nearby point sources, whose emissions are concentrated in a thin layer near the surface. Column observations are more compatible with the scale of atmospheric models and hence provide stronger constraints for inverse modeling. In Munich we are aiming at establishing a regional sensor network with differential column measurements, i.e. total column measurements of CO2 and CH4 inside and outside of the city. The inner-city station is equipped with a compact solar-tracking Fourier transform spectrometer (Bruker EM27/SUN) in the campus of Technische Universität München, and our measurements started in Aug. 2015. The measurements over seasons will be shown, as well as preliminary emission studies using these observations. To deploy the compact spectrometers for stationary monitoring of the urban emissions, an automatic protection and control system is mandatory and a challenging task. It will allow solar measurements whenever the sun is out and reliable protection of the instrument when it starts to rain. We have developed a simplified and highly reliable concept for the enclosure, aiming for a fully automated data collection station without the need of local human interactions. Furthermore, we are validating and combining the OCO-2 satellite-based measurements with our ground-based measurements. For this purpose, we have developed a software tool that

Energy dependent response of plastic scintillation detectors to photon radiation of low to medium energy.

PubMed

Ebenau, Melanie; Radeck, Désirée; Bambynek, Markus; Sommer, Holger; Flühs, Dirk; Spaan, Bernhard; Eichmann, Marion

2016-08-01

Plastic scintillation detectors are promising candidates for the dosimetry of low- to medium-energy photons but quantitative knowledge of their energy response is a prerequisite for their correct use. The purpose of this study was to characterize the energy dependent response of small scintillation detectors (active volume <1 mm(3)) made from the commonly used plastic scintillator BC400. Different detectors made from BC400 were calibrated at a number of radiation qualities ranging from 10 to 280 kV and at a (60)Co beam. All calibrations were performed at the Physikalisch-Technische Bundesanstalt, the National Metrology Institute of Germany. The energy response in terms of air kerma, dose to water, and dose to the scintillator was determined. Conversion factors from air kerma to dose to water and to dose to the scintillator were derived from Monte Carlo simulations. In order to quantitatively describe the energy dependence, a semiempirical model known as unimolecular quenching or Birks' formula was fitted to the data and from this the response to secondary electrons generated within the scintillator material BC400 was derived. The detector energy response in terms of air kerma differs for different scintillator sizes and different detector casings. It is therefore necessary to take attenuation within the scintillator and in the casing into account when deriving the response in terms of dose to water from a calibration in terms of air kerma. The measured energy response in terms of dose to water for BC400 cannot be reproduced by the ratio of mean mass energy-absorption coefficients for polyvinyl toluene to water but shows evidence of quenching. The quenching parameter kB in Birks' formula was determined to be kB = (12.3 ± 0.9) mg MeV(-1) cm(-2). The energy response was quantified relative to the response to (60)Co which is the common radiation quality for the calibration of therapy dosemeters. The observed energy dependence could be well explained with the

Differences between state entropy and bispectral index during analysis of identical electroencephalogram signals: a comparison with two randomised anaesthetic techniques.

PubMed

Pilge, Stefanie; Kreuzer, Matthias; Karatchiviev, Veliko; Kochs, Eberhard F; Malcharek, Michael; Schneider, Gerhard

2015-05-01

It is claimed that bispectral index (BIS) and state entropy reflect an identical clinical spectrum, the hypnotic component of anaesthesia. So far, it is not known to what extent different devices display similar index values while processing identical electroencephalogram (EEG) signals. To compare BIS and state entropy during analysis of identical EEG data. Inspection of raw EEG input to detect potential causes of erroneous index calculation. Offline re-analysis of EEG data from a randomised, single-centre controlled trial using the Entropy Module and an Aspect A-2000 monitor. Klinikum rechts der Isar, Technische Universität München, Munich. Forty adult patients undergoing elective surgery under general anaesthesia. Blocked randomisation of 20 patients per anaesthetic group (sevoflurane/remifentanil or propofol/remifentanil). Isolated forearm technique for differentiation between consciousness and unconsciousness. Prediction probability (PK) of state entropy to discriminate consciousness from unconsciousness. Correlation and agreement between state entropy and BIS from deep to light hypnosis. Analysis of raw EEG compared with index values that are in conflict with clinical examination, with frequency measures (frequency bands/Spectral Edge Frequency 95) and visual inspection for physiological EEG patterns (e.g. beta or delta arousal), pathophysiological features such as high-frequency signals (electromyogram/high-frequency EEG or eye fluttering/saccades), different types of electro-oculogram or epileptiform EEG and technical artefacts. PK of state entropy was 0.80 and of BIS 0.84; correlation coefficient of state entropy with BIS 0.78. Nine percent BIS and 14% state entropy values disagreed with clinical examination. Highest incidence of disagreement occurred after state transitions, in particular for state entropy after loss of consciousness during sevoflurane anaesthesia. EEG sequences which led to false 'conscious' index values often showed high

PRESCILA: a new, lightweight neutron rem meter.

PubMed

Olsher, Richard H; Seagraves, David T; Eisele, Shawna L; Bjork, Christopher W; Martinez, William A; Romero, Leonard L; Mallett, Michael W; Duran, Michael A; Hurlbut, Charles R

2004-06-01

Conventional neutron rem meters currently in use are based on 1960's technology that relies on a large neutron moderator assembly surrounding a thermal detector to achieve a rem-like response function over a limited energy range. Such rem meters present an ergonomic challenge, being heavy and bulky, and have caused injuries during radiation protection surveys. Another defect of traditional rem meters is a poor high-energy response above 10 MeV, which makes them unsuitable for applications at high-energy accelerator facilities. Proton Recoil Scintillator-Los Alamos (PRESCILA) was developed as a low-weight (2 kg) alternative capable of extended energy response, high sensitivity, and moderate gamma rejection. An array of ZnS(Ag) based scintillators is located inside and around a Lucite light guide, which couples the scintillation light to a sideview bialkali photomultiplier tube. The use of both fast and thermal scintillators allows the energy response function to be optimized for a wide range of operational spectra. The light guide and the borated polyethylene frame provide moderation for the thermal scintillator element. The scintillators represent greatly improved versions of the Hornyak and Stedman designs from the 1950's, and were developed in collaboration with Eljen Technology. The inherent pulse height advantage of proton recoils over electron tracks in the phosphor grains eliminates the need for pulse shape discrimination and makes it possible to use the PRESCILA probe with standard pulse height discrimination provided by off-the-shelf health physics counters. PRESCILA prototype probes have been extensively tested at both Los Alamos and the German Bureau of Standards, Physikalisch-Technische Bundesanstalt. Test results are presented for energy response, directional dependence, linearity, sensitivity, and gamma rejection. Initial field tests have been conducted at Los Alamos and these results are also given. It is concluded that PRESCILA offers a viable

A catchment-scale groundwater model including sewer pipe leakage in an urban system

NASA Astrophysics Data System (ADS)

Peche, Aaron; Fuchs, Lothar; Spönemann, Peter; Graf, Thomas; Neuweiler, Insa

2016-04-01

-202. itwh (2002). Modellbeschreibung, Institut für technisch-wissenschaftliche Hydrologie GmbH, Hannover. Karpf, C. & Krebs, P. (2013). Modelling of groundwater infiltration into sewer systems. Urban Water Journal, 10:4, 221-229, DOI: 10.1080/1573062X.2012.724077. Kolditz, O., Bauer, S. et al. (2012). OpenGeoSys: an open source initiative for numerical simulation of thermo-hydro-mechanical/chemical (THM/C) processes in porous media. Env. Earth Sci. 67(2):589-599. Wolf, L., Held, I., Eiswirth, M., & Hötzl, H. (2004). Impact of leaky sewers on groundwater quality. Acta Hydrochimica et Hydrobiologica, 32(4-5), 361-373. doi:10.1002/aheh.200400538. Wolf, L. (2006). Influence of leaky sewer systems on groundwater resources beneath the city of Rastatt, Germany. Dissertation, University of Karlsruhe.

Application of ray-traced tropospheric slant delays to geodetic VLBI analysis

NASA Astrophysics Data System (ADS)

Hofmeister, Armin; Böhm, Johannes

2017-08-01

The correction of tropospheric influences via so-called path delays is critical for the analysis of observations from space geodetic techniques like the very long baseline interferometry (VLBI). In standard VLBI analysis, the a priori slant path delays are determined using the concept of zenith delays, mapping functions and gradients. The a priori use of ray-traced delays, i.e., tropospheric slant path delays determined with the technique of ray-tracing through the meteorological data of numerical weather models (NWM), serves as an alternative way of correcting the influences of the troposphere on the VLBI observations within the analysis. In the presented research, the application of ray-traced delays to the VLBI analysis of sessions in a time span of 16.5 years is investigated. Ray-traced delays have been determined with program RADIATE (see Hofmeister in Ph.D. thesis, Department of Geodesy and Geophysics, Faculty of Mathematics and Geoinformation, Technische Universität Wien. http://resolver.obvsg.at/urn:nbn:at:at-ubtuw:1-3444, 2016) utilizing meteorological data provided by NWM of the European Centre for Medium-Range Weather Forecasts (ECMWF). In comparison with a standard VLBI analysis, which includes the tropospheric gradient estimation, the application of the ray-traced delays to an analysis, which uses the same parameterization except for the a priori slant path delay handling and the used wet mapping factors for the zenith wet delay (ZWD) estimation, improves the baseline length repeatability (BLR) at 55.9% of the baselines at sub-mm level. If no tropospheric gradients are estimated within the compared analyses, 90.6% of all baselines benefit from the application of the ray-traced delays, which leads to an average improvement of the BLR of 1 mm. The effects of the ray-traced delays on the terrestrial reference frame are also investigated. A separate assessment of the RADIATE ray-traced delays is carried out by comparison to the ray-traced delays from the

A dynamic human water and electrolyte balance model for verification and optimization of life support systems in space flight applications

NASA Astrophysics Data System (ADS)

Hager, P.; Czupalla, M.; Walter, U.

2010-11-01

In this paper we report on the development of a dynamic MATLAB SIMULINK® model for the water and electrolyte balance inside the human body. This model is part of an environmentally sensitive dynamic human model for the optimization and verification of environmental control and life support systems (ECLSS) in space flight applications. An ECLSS provides all vital supplies for supporting human life on board a spacecraft. As human space flight today focuses on medium- to long-term missions, the strategy in ECLSS is shifting to closed loop systems. For these systems the dynamic stability and function over long duration are essential. However, the only evaluation and rating methods for ECLSS up to now are either expensive trial and error breadboarding strategies or static and semi-dynamic simulations. In order to overcome this mismatch the Exploration Group at Technische Universität München (TUM) is developing a dynamic environmental simulation, the "Virtual Habitat" (V-HAB). The central element of this simulation is the dynamic and environmentally sensitive human model. The water subsystem simulation of the human model discussed in this paper is of vital importance for the efficiency of possible ECLSS optimizations, as an over- or under-scaled water subsystem would have an adverse effect on the overall mass budget. On the other hand water has a pivotal role in the human organism. Water accounts for about 60% of the total body mass and is educt and product of numerous metabolic reactions. It is a transport medium for solutes and, due to its high evaporation enthalpy, provides the most potent medium for heat load dissipation. In a system engineering approach the human water balance was worked out by simulating the human body's subsystems and their interactions. The body fluids were assumed to reside in three compartments: blood plasma, interstitial fluid and intracellular fluid. In addition, the active and passive transport of water and solutes between those

Phytoremediation of spoil coal dumps in Western Donbass (Ukraine)

NASA Astrophysics Data System (ADS)

Klimkina, Iryna; Kharytonov, Mykola; Wiche, Oliver; Heilmeier, Hermann

2017-04-01

techniques. Results on accumulation of target elements in the above- and below ground biomass of abundant plant species will be used to discuss their phytoremediation potential for spoil coal dumps in Western Donbas. Research is being carried out in the framework of DAAD project "Biotechnology in Mining - Integration of New Technologies into Educational Practice" and cooperation between TechnischeUniversität Bergakademie Freiberg, Germany, and National Mining University, Dnipro, Ukraine.

Peer review statement

NASA Astrophysics Data System (ADS)

2012-11-01

University China Peter PELZ Darmstadt University Germany František POCHYLY Brno University Czech Republic Rudolf SCHILLING Technische Universität München Germany Minguan YANG Jiangsu University China Smaine KOUIDRI Université Pierre et Marie Curie (Paris 6) France Kazuhiro TANAKA Kyushu Institute of Technology Japan Xuelin TANG Tsinghua University China Yoshinobu TSUJIMOTO Osaka University Japan Fujun WANG China Agriculture University China Guoyu WANG Beijing University of Sci & Tech China Wenwu SONG NULL China Zhengwei WANG Tsinghua University China Hongyuan XU Tsinghua University China Lefu XIAO NULL China Fan YANG Tsinghua University China Yuan ZHENG Hehai University China Zhigang ZUO Tsinghua University China Hongwu ZHU China Petroleum University China Lixiang ZHANG Yunnan University of Sci & Tech China Shengchang ZHANG Zhejiang University of Tech China

Thermal use of groundwater: International legislation and ecological considerations

NASA Astrophysics Data System (ADS)

Hähnlein, S.; Griebler, C.; Blum, P.; Bayer, P.

2009-04-01

biocoenoses. For a profound quantification and interpretation of an ecologically sustainable thermal use of groundwater more data from lab experiments and in situ surveys are needed. We can conclude that for sustainable use of groundwater legally-binding minimum distances between adjacent installations are crucial. However, they have to be based on geological arguments. Also relative temperature limits for cooling and heating of groundwater to avoid negative changes in the groundwater ecosystem should be defined. Overall, there is a need for a legal framework, ideally developed nationally and internationally, which thoroughly addresses legal, technical, ecological and economical aspects. References: Hähnlein, S., Grathwohl, P., Bayer P., Blum, P. (2008a): Cold plumes of ground source heat pumps: Their length and legal situation. EGU, Vienna. Hähnlein, S., Kübert, M., Bayer, P., Walker-Hertkorn, S., Blum, P. (2008b): Rechtliche und technische Aspekte einer nachhaltigen thermischen Grundwassernutzung. FH-DGG Tagung, Göttingen.

Mobile radiography CQI: an inter-national study.

PubMed

Kamat, M R; Wein, B; Cohan, R

1999-01-01

Mobile or bedside radiography has been and is a staple diagnostic and follow-up tool used readily by the many medical disciplines, such as cardiology, surgery, orthopedics, pediatrics, neonatology, etc. Ironically, in the past a student or the least qualified technologist was sent to perform the bedside exam. Moreover, it was almost expected that poor but acceptable film quality would result or that repeat films were almost always to be taken. Inefficiency with respect to quality of exam, the time the exam takes, or film repeats can be costly. The price of inefficiency is the cost involved in doing things incorrectly or not in the most efficient manner, i.e., incurring inefficiencies instead of operating in an ideal manner. The purpose of this study was to compare the total cost of inefficiently organized, scheduled and performed mobile radiography at three large teaching hospitals in various locations and of diverse patient loads, as a means of determining how best to increase utilization and performance. The study was performed at the 489-bed New England Deaconess Hospital (NEDH), the 644-bed Sentara Norfolk General Hospital (SNGH), and the 1500-bed Rheinische Westfalische Technische Hochschule (RWTH) in Aachen, Germany. Similar standardized study methods were utilized at all three institutions where extended observation of mobile utilization, areas of inefficiency, time wasted per episode and number of episodes per time period were determined. Data were loggedin at three standardized time periods, summated, and then multiplied by technologist hourly pay rate. This sum was extrapolated over 52 weeks to give the total annual cost of inefficiently organized mobile radiography. For NEDH the cost of total inefficiency was $75,453, for SNGH $49,586, while for RWTH it was $9,519. Eighteen areas of inefficiency were identified and grouped, such as lack of spatial cohesiveness and lack of communication leading to film duplication, etc. While inefficiencies in the

Status report on the cold neutron source of the Garching neutron research facility FRM-II

NASA Astrophysics Data System (ADS)

Gobrecht, K.; Gutsmiedl, E.; Scheuer, A.

2002-01-01

The new high flux research reactor of the Technical University of Munich (Technische Universität München, TUM) will be equipped with a cold neutron source (CNS). The centre of the CNS will be located in the D 2O-reflector tank at 400 mm from the reactor core axis close to the thermal neutron flux maximum. The power of 4500 W developed by the nuclear heating in the 16 l of liquid deuterium at 25 K, and in the structures, is evacuated by a two-phase thermal siphon avoiding film boiling and flooding. The thermal siphon is a single tube with counter current flow. It is inclined by 10° from vertical, and optimised for a deuterium flow rate of 14 g/s. Optimisation of structure design and material, as well as safety aspects will be discussed. Those parts of the structure, which are exposed to high thermal neutron flux, are made from Zircaloy 4 and 6061T6 aluminium. Structure failure due to embrittlement of the structure material under high rapid neutron flux is very improbable during the lifetime of the CNS (30 years). Double, in pile even triple, containment with inert gas liner guarantees lack of explosion risk and of tritium contamination to the environment. Adding a few percent of hydrogen (H 2) to the deuterium (D 2) will improve the moderating properties of our relatively small moderator volume. Nearly all of the hydrogen is bound in the form of HD molecules. A long-term change of the hydrogen content in the deuterium is avoided by storing the mixture not in a gas buffer volume but as a metal hydride at low pressure. The metal hydride storage system contains two getter beds, one with 250 kg of LaCo 3Ni 2, the other one with 150 kg of ZrCo 0.8Ni 0.2. Each bed can take the total gas inventory, both beds together can absorb the total gas inventory in <6 min at a pressure <3 bar. The new reactor will have 13 beam tubes, 4 of which are looking at the CNS, including two for very cold (VCN) and ultra-cold neutron (UCN) production. The latter will take place in the

Mitigation of Atmospheric Delay in SAR Absolute Ranging Using Global Numerical Weather Prediction Data: Corner Reflector Experiments at 3 Different Test Sites

NASA Astrophysics Data System (ADS)

Cong, Xiaoying; Balss, Ulrich; Eineder, Michael

2015-04-01

Base of Far-Distributed Test Sites; EUSAR 2014; 10th European Conference on Synthetic Aperture Radar; Proceedings of. VDE, 2014: 1-4. [3] Eineder M., Balss U., Gisinger C., et al. TerraSAR-X pixel localization accuracy: Approaching the centimeter level, Geoscience and Remote Sensing Symposium (IGARSS), 2014 IEEE International. IEEE, 2014: 2669-2670. [4] Cong X., Balss U., Eineder M., et al. Imaging Geodesy -- Centimeter-Level Ranging Accuracy With TerraSAR-X: An Update. Geoscience and Remote Sensing Letters, IEEE, 2012, 9(5): 948-952. [5] Cong X. SAR Interferometry for Volcano Monitoring: 3D-PSI Analysis and Mitigation of Atmospheric Refractivity. München, Technische Universität München, Dissertation, 2014.

Kamarizaite, Fe{3/3+}(AsO4)2(OH)3 · 3H2O, a new mineral species, arsenate analogue of tinticite

NASA Astrophysics Data System (ADS)

Chukanov, N. V.; Pekov, I. V.; Möckel, S.; Mukhanova, A. A.; Belakovsky, D. I.; Levitskaya, L. A.; Bekenova, G. K.

2010-12-01

). The type material of kamarizaite is deposited in the Mineralogical Collection of Technische Universität Bergakademie Freiberg, Germany, inventory number 82199.

Vine vigor components and its variability - relationship to wine composition

NASA Astrophysics Data System (ADS)

Lafontaine, Magali; Tittmann, Susanne; Stoll, Manfred

2015-04-01

variability with a 11 fold concentration range (50-550 mg CE L-1) while variability of anthocyanins was lower with a 3 fold concentration range (90-250 mg M3OG L-1). The results showed that differences in leaf chlorophyll (SFR_G) would represent the most important factor influencing wine phenolic composition. Measurements of soil resistivity based on ARP technique (Geocarta, Paris, France), leaf composition with a mounted Multiplex providing information on porosity (NFI), biomass (BIOMASS) and chlorophyll (BISFR) together with NDVI assessed by geo-X8000 (geo-konzept-Gesellschaft für Umweltplanungssysteme mbH, Adelschlag, Germany) were performed. Grapes and berry composition was also assessed with Mx3 providing information on anthocyanins (ANTH, FERARI) and sugar (SFR_R) variability. In a second step, vines similar in size (trunk diameter and cane number) and similar yield (number of bunches per vines) were divided in 3 groups differing in leaf SFR_G. A larger scale winemaking (150kg) showed that with increasing SFR_G, Pinot noir wine typicity decreased together with anthocyanin concentration while tannin concentration increased. A better understanding of vineyard variability for targeted management or harvest would allow better understanding to produce and select fruit to a favored wine style.

PREFACE Preface

NASA Astrophysics Data System (ADS)

Degrez, Gérard; van der Mullen, Joost

2011-01-01

It is with pleasure and pride that we present the selected contributions from participants of the 11th High-Tech Plasma Processes conference. This conference, which took place in Brussels from June 28 to July 2 2010, is based on a European forum with a history of more than twenty years. The conference series started as a thermal plasma conference and gradually expanded to include other topics and fields as well. HTPP 11 was organized in collaboration with the Belgian Interuniversity Attraction Pole (IAP): Physical chemistry of Plasma-surface Interactions (PSI-ψ). The program was devised by the plasma group of the Technische Universiteit Eindhoven in collaboration with the IAP, the Association Arc Electrique and the International Scientific Committee. The organization was guided by the Steering Committee and supervised by the two founding members, Jacques Amouroux and Pierre Fauchais. HTPP aims to bring together different scientific communities to facilitate contacts between science, technology and industry, providing a platform for the exploration of elementary processes in and by plasmas. This implies that, apart from fundamental topics, considerable attention is paid to new plasma applications; plasma engineering in Europe is one of the main driving forces behind HTPP. The conference supports the dissemination of methods for plasma diagnostics and monitoring and the exchange of models for plasmas sources and plasma applications. A novelty of HTPP 11 was the model market; a special type of poster session where running models were demonstrated and spectators were challenged to assemble their own plasma models using one of the available construction platforms. For the first time in this series of conferences, the proceedings are published in two companion issues: Journal of Physics D: Applied Physics, which presents a selection of papers including invited and keynote papers, and the Journal of Physics: Conference Series. The present volume of the Journal of Physics

Combining the Observations from Different GNSS (Invited)

NASA Astrophysics Data System (ADS)

Dach, R.; Lutz, S.; Schaer, S.; Bock, H.; Jäggi, A.; Meindl, M.; Ostini, L.; Thaller, D.; Steinbach, A.; Beutler, G.; Steigenberger, P.

2009-12-01

For a very long time GPS has clearly dominated the use of GNSS measurements for scientific purposes. This picture is changing: we are moving from a GPS-only to a multi-GNSS world. This is, e.g., reflected by changing the meaning of the abbreviation IGS in March 2005 from International GPS to GNSS Service. The current situation can be described as follows: GPS has the leading role in the GNSS because it has provided a very stable satellite constellation over many years. Some of the currently active GPS satellites are nearly 15 years old. These old satellites are expected to be decommissioned within the next years. On the other hand, due to the increasing number of active GLONASS satellites and the improved density of multi-GNSS tracking stations in the IGS network, the quality of the GLONASS orbits has drastically improved during the last years. The European Galileo system is under development: currently two test satellites (GIOVE-A and GIOVE-B) are in orbit. The IOV (in-orbit-validation phase) will start soon. Also the first test satellites for the Chinese Compass system are in space. For the maximum benefit the observations of these GNSS will be processed in a combined multi-GNSS analysis in future. CODE (Center for Orbit Determination in Europe) is a joint venture between the Astronomical Institute of the University Bern (AIUB, Bern, Switzerland), the Federal Office of Topography (swisstopo, Wabern, Switzerland), the Federal Agency for Cartography and Geodesy (BKG, Frankfurt am Main, Germany), and the Institut für Astronomische und Physikalische Geodäsie of the Technische Universität München (IAPG/TUM, Munich, Germany). It acts as one of the global analysis centers of the IGS and has started in May 2003 with a rigorous combined processing of GPS and GLONASS measurements for the final, rapid, and even ultra-rapid product lines. All contributions from CODE to the IGS are in fact multi-GNSS products -- the only exception is the satellite and receiver clock

Experimental and numerical investigations of the turbulent wake flow of a generic space launcher at $M_infty =3 M ∞ = 3 and M_infty =6$ M ∞ = 6

NASA Astrophysics Data System (ADS)

Statnikov, V.; Stephan, S.; Pausch, K.; Meinke, M.; Radespiel, R.; Schröder, W.

2016-06-01

The turbulent wake of a generic space launcher wind tunnel model with an underexpanded nozzle jet is investigated experimentally and numerically to gain insight into the variation of intricate wake flow phenomena of space vehicles at higher stages of the flight trajectory with increasing Mach number. The experiments are carried out at M_∞ =3 and M_∞ =6 in the Ludwieg tube test facility at the Institute of Fluid Mechanics at the Technische Universität Braunschweig, while the corresponding time-resolved computations are performed by the Institute of Aerodynamics at RWTH Aachen University using a zonal RANS-LES approach. A strong alteration of the wake topology with increasing Mach number due to the changing pressure ratio at the nozzle exit is found. At M_∞ =3 the moderate underexpansion rate of p_e/p_∞ ≈ 5 leads to a formation of a recirculation region with an elongated triangular cross-section reaching to the nozzle exit. At M_∞ =6 a substantially stronger afterexpansion of the jet plume (p_e/p_∞ ≈ 100) causes the formation of a cavity region with a quadrangular cross-section. The stronger deflection towards the nozzle at M_∞ =3 results in lower mean and rms wall pressure ratios than at M_∞ =6. However, due to the higher freestream pressure value at the lower Mach number the relation of absolute values is reciprocal, making the lower supersonic regime more critical with respect to dynamic structural loads. This observation is confirmed by an overall good agreement between numerical and experimental data at characteristic positions on the base and nozzle wall. Furthermore, it was shown that undesired effects of the strut support in the wake are present along the whole circumference. For M_∞ =3 the strut influence is found to be particularly intense. The spectral analysis of wall pressure fluctuations reveals fundamental differences in the dynamic behavior of the two investigated wake flow regimes. At M_∞ =3, a dominant frequency range around

PRIMA-X Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lorenz, Daniel; Wolf, Felix

2016-02-17

The PRIMA-X (Performance Retargeting of Instrumentation, Measurement, and Analysis Technologies for Exascale Computing) project is the successor of the DOE PRIMA (Performance Refactoring of Instrumentation, Measurement, and Analysis Technologies for Petascale Computing) project, which addressed the challenge of creating a core measurement infrastructure that would serve as a common platform for both integrating leading parallel performance systems (notably TAU and Scalasca) and developing next-generation scalable performance tools. The PRIMA-X project shifts the focus away from refactorization of robust performance tools towards a re-targeting of the parallel performance measurement and analysis architecture for extreme scales. The massive concurrency, asynchronous execution dynamics,more » hardware heterogeneity, and multi-objective prerequisites (performance, power, resilience) that identify exascale systems introduce fundamental constraints on the ability to carry forward existing performance methodologies. In particular, there must be a deemphasis of per-thread observation techniques to significantly reduce the otherwise unsustainable flood of redundant performance data. Instead, it will be necessary to assimilate multi-level resource observations into macroscopic performance views, from which resilient performance metrics can be attributed to the computational features of the application. This requires a scalable framework for node-level and system-wide monitoring and runtime analyses of dynamic performance information. Also, the interest in optimizing parallelism parameters with respect to performance and energy drives the integration of tool capabilities in the exascale environment further. Initially, PRIMA-X was a collaborative project between the University of Oregon (lead institution) and the German Research School for Simulation Sciences (GRS). Because Prof. Wolf, the PI at GRS, accepted a position as full professor at Technische Universität Darmstadt

Research and Development on In-Situ Measurement Sensors for Micro-Meteoroid and Small Space Debris at JAXA

NASA Astrophysics Data System (ADS)

Kitazawa, Yukihito; Matsumoto, Haruhisa; Okudaira, Osamu; Kimoto, Yugo; Hanada, Toshiya; Akahoshi, Yasuhiro; Pauline, Faure; Sakurai, Akira; Funakoshi, Kunihiro; Yasaka, Testuo

2015-04-01

The history of Japanese R&D into in-situ sensors for micro-meteoroid and orbital debris (MMOD) measurements is neither particularly long nor short. Research into active sensors started for the meteoroid observation experiment on the HITEN (MUSES-A) satellite of ISAS/JAXA launched in 1990, which had MDC (Munich Dust Counter) on-board sensors for micro meteoroid measurement. This was a collaboration between Technische Universität München and ISAS/JAXA. The main purpose behind the start of passive sensor research was SOCCOR, a late 80's Japan-US mission that planned to capture cometary dust and return to the Earth. Although this mission was canceled, the research outcomes were employed in a JAXA micro debris sample return mission using calibrated aerogel involving the Space Shuttle and the International Space Station. There have been many other important activities apart from the above, and the knowledge generated from them has contributed to JAXA's development of a new type of active dust sensor. JAXA and its partners have been developing a simple in-situ active dust sensor of a new type to detect dust particles ranging from a hundred micrometers to several millimeters. The distribution and flux of the debris in the size range are not well understood and is difficult to measure using ground observations. However, it is important that the risk caused by such debris is assessed. In-situ measurement of debris in this size range is useful for 1) verifying meteoroid and debris environment models, 2) verifying meteoroid and debris environment evolution models, and 3) the real time detection of explosions, collisions and other unexpected orbital events. Multitudes of thin, conductive copper strips are formed at a fine pitch of 100 um on a film 12.5 um thick of nonconductive polyimide. An MMOD particle impact is detected when one or more strips are severed by being perforated by such an impact. This sensor is simple to produce and use and requires almost no calibration as

Human posture experiments under water: ways of applying the findings to microgravity

NASA Astrophysics Data System (ADS)

Dirlich, Thomas

For the design and layout human spacecraft interiors the Neutral Body Posture (NBP) in micro-gravity is of great importance. The NBP has been defined as the stable, replicable and nearly constant posture the body "automatically" assumes when a human relaxes in microgravity. Furthermore the NBP, as published, suggests that there is one standard neutral posture for all individuals. Published experiments from space, parabolic flights and under water on the other hand show strong inter-individual variations of neutral (relaxed) postures. This might originate from the quite small sample sizes of subjects analyzed or the different experiment conditions, e. g. space and under water. Since 2008 a collaborative research project focussing on human postures and motions in microgravity has been ongoing at the Technische Univer-sitüt München (TUM). This collaborative effort is undertaken by the Institute of Astronautics a (LRT) and the Institute of Ergonomics (LfE). Several test campaigns have been conducted in simulated microgravity under water using a specially designed standardized experiment setup. Stereo-metric HD video footage and anthropometric data from over 50 subjects (female and male) has been gathered in over 80 experiments. The video data is analyzed using PCMAN software, developed by the LfE, resulting in a 3D volumetric CAD-based model of each subject and posture. Preliminary and ongoing analysis of the data offer evidence for the existence of intra-individually constant neutral postures, as well as continuously recurring relaxation strate-gies. But as with the data published prior the TUM experiments show quite a large variation of inter-individual postures. These variation might be induced or influenced by the special environmental conditions in the underwater experiment. Thus in present paper ways of stan-dardizing data and applying the findings gathered under water to real microgravity are being discussed. The following influences stemming from the

Mixtures of Bosonic and Fermionic atoms

NASA Astrophysics Data System (ADS)

Albus, Alexander

2003-12-01

The theory of atomic Boson-Fermion mixtures in the dilute limit beyond mean-field is considered in this thesis. Extending the formalism of quantum field theory we derived expressions for the quasi-particle excitation spectra, the ground state energy, and related quantities for a homogenous system to first order in the dilute gas parameter. In the framework of density functional theory we could carry over the previous results to inhomogeneous systems. We then determined to density distributions for various parameter values and identified three different phase regions: (i) a stable mixed regime, (ii) a phase separated regime, and (iii) a collapsed regime. We found a significant contribution of exchange-correlation effects in the latter case. Next, we determined the shift of the Bose-Einstein condensation temperature caused by Boson-Fermion interactions in a harmonic trap due to redistribution of the density profiles. We then considered Boson-Fermion mixtures in optical lattices. We calculated the criterion for stability against phase separation, identified the Mott-insulating and superfluid regimes both, analytically within a mean-field calculation, and numerically by virtue of a Gutzwiller Ansatz. We also found new frustrated ground states in the limit of very strong lattices. ----Anmerkung: Der Autor ist Träger des durch die Physikalische Gesellschaft zu Berlin vergebenen Carl-Ramsauer-Preises 2004 für die jeweils beste Dissertation der vier Universitäten Freie Universität Berlin, Humboldt-Universität zu Berlin, Technische Universität Berlin und Universität Potsdam. Ziel der Arbeit war die systematische theoretische Behandlung von Gemischen aus bosonischen und fermionischen Atomen in einem Parameterbereich, der sich zur Beschreibung von aktuellen Experimenten mit ultra-kalten atomaren Gasen eignet. Zuerst wurde der Formalismus der Quantenfeldtheorie auf homogene, atomare Boson-Fermion Gemische erweitert, um grundlegende Größen wie Quasiteilchenspektren

Ionosphere monitoring and forecast activities within the IAG working group "Ionosphere Prediction"

NASA Astrophysics Data System (ADS)

Hoque, Mainul; Garcia-Rigo, Alberto; Erdogan, Eren; Cueto Santamaría, Marta; Jakowski, Norbert; Berdermann, Jens; Hernandez-Pajares, Manuel; Schmidt, Michael; Wilken, Volker

2017-04-01

Ionospheric disturbances can affect technologies in space and on Earth disrupting satellite and airline operations, communications networks, navigation systems. As the world becomes ever more dependent on these technologies, ionospheric disturbances as part of space weather pose an increasing risk to the economic vitality and national security. Therefore, having the knowledge of ionospheric state in advance during space weather events is becoming more and more important. To promote scientific cooperation we recently formed a Working Group (WG) called "Ionosphere Predictions" within the International Association of Geodesy (IAG) under Sub-Commission 4.3 "Atmosphere Remote Sensing" of the Commission 4 "Positioning and Applications". The general objective of the WG is to promote the development of ionosphere prediction algorithm/models based on the dependence of ionospheric characteristics on solar and magnetic conditions combining data from different sensors to improve the spatial and temporal resolution and sensitivity taking advantage of different sounding geometries and latency. Our presented work enables the possibility to compare total electron content (TEC) prediction approaches/results from different centers contributing to this WG such as German Aerospace Center (DLR), Universitat Politècnica de Catalunya (UPC), Technische Universität München (TUM) and GMV. DLR developed a model-assisted TEC forecast algorithm taking benefit from actual trends of the TEC behavior at each grid point. Since during perturbations, characterized by large TEC fluctuations or ionization fronts, this approach may fail, the trend information is merged with the current background model which provides a stable climatological TEC behavior. The presented solution is a first step to regularly provide forecasted TEC services via SWACI/IMPC by DLR. UPC forecast model is based on applying linear regression to a temporal window of TEC maps in the Discrete Cosine Transform (DCT) domain

100th anniversary of the birth of B M Pontecorvo (Scientific session of the Physical Sciences Division of the Russian Academy of Sciences, 2 September 2013)

NASA Astrophysics Data System (ADS)

2014-05-01

A scientific session "Prospects of Studies in Neutrino Particle Physics and Astrophysics," of the Physical Sciences Division of the Russian Academy of Sciences (DPS RAS), devoted to the centenary of B M Pontecorvo, was held on 2-3 September 2014 at the JINR international conference hall (Dubna, Moscow region).The following reports were put on the session agenda as posted on the website http://www.gpad.ac.ru of the RAS Physical Sciences Division: (1) Kudenko Yu G (Institute for Nuclear Research, RAS, Moscow; Moscow Institute of Physics and Technology, Dolgoprudnyi, Moscow region; National Research Nuclear University MEPhI, Moscow) "Long-baseline neutrino accelerator experiments: results and prospects";(2) Spiering Ch (Deutsches Elektronen-Synchrotron (DESY), Germany) "Results obtained by ICECUBE and prospects of neutrino astronomy";(3) Barabash A S (Alikhanov Institute for Theoretical and Experimental Physics, Moscow) "Double beta decay experiments: current status and prospects";(4) Bilenky S M (Joint Institute for Nuclear Research, Dubna, Moscow region; Technische Universitat M'unchen, Garching, Germany) "Bruno Pontecorvo and the neutrino";(5) Olshevskiy A G (Joint Institute for Nuclear Research, Dubna, Moscow region) "Reactor neutrino experiments: results and prospects";(6) Gavrin V N (Institute for Nuclear Research, RAS, Moscow) "Low-energy neutrino research at the Baksan Neutrino Laboratory";(7) Gorbunov D S (Institute for Nuclear Research, RAS, Moscow): "Sterile neutrinos and their role in particle physics and cosmology";(8) Derbin A V (Konstantinov Petersburg Nuclear Physics Institute, Gatchina, Leningrad region) "Solar neutrino experiments";(9) Rubakov V A (Institute for Nuclear Research, RAS, Moscow) "Prospects of studies in the field of neutrino particle physics and astrophysics." An article by V N Gavrin, close in essence to talk 6, was published in Usp. Fiz. Nauk 181 (9), 975 (2011) [Phys. Usp. 54 (9) 941 (2011)]. Articles by V A Rubakov, close in essence

Experiences gained by establishing the IAMG Student Chapter Freiberg

NASA Astrophysics Data System (ADS)

Ernst, Sebastian M.; Liesenberg, Veraldo; Shahzad, Faisal

2013-04-01

The International Association for Mathematical Geosciences (IAMG) Student Chapter Freiberg was founded in 2007 at the Technische Universität Bergakademie Freiberg (TUBAF) in Germany by national and international graduate and undergraduate students of various geoscientific as well as natural science disciplines. The major aim of the IAMG is to promote international cooperation in the application and use of Mathematics in Geosciences research and technology. The IAMG encourages all types of students and young scientists to found and maintain student chapters, which can even receive limited financial support by the IAMG. Following this encouragement, generations of students at TUBAF have build up and established a prosperous range of activities. These might be an example and an invitation for other young scientists and institutions worldwide to run similar activities. We, some of the current and former students behind the student chapter, have organised talks, membership drives, student seminars, guest lectures, several short courses and even international workshops. Some notable short courses were held by invited IAMG distinguished lecturers. The topics included "Statistical analysis in the Earth Sciences using R - a language and environment for statistical computing and graphics", "Geomathematical Natural Resource Modeling" and "Introduction to Geostatistics for Environmental Applications and Natural Resources Evaluation: Basic Concepts and Examples". Furthermore, we conducted short courses by ourselves. Here, the topics included basic introductions into MATLAB, object oriented programming concepts for geoscientists using MATLAB and an introduction to the Keyhole Markup Language (KML). Most of those short courses lasted several days and provided an excellent and unprecedented teaching experience for us. We were given credit by attending students for filling gaps in our university's curriculum by providing in-depth and hands-on tutorials on topics, which were merely

Foreword: Proceedings of the 15th International Winterschool on New Developments in Solid State Physics (Mauterndorf (Bad Hofgastein), 18 22 February 2008)

NASA Astrophysics Data System (ADS)

Jantsch, Wolfgang; Ferry, David; Kuchar, Friedl

2008-11-01

Günther Bauer Günther Bauer. This special issue of Journal of Physics: Condensed Matter is devoted to Günther Bauer, who celebrated his 65th birthday in September 2007. Günther has had a long career in condensed matter physics, but is known particularly for his studies of high magnetic field transport and optics in semiconductors and, more recently, for the discovery and x-ray analysis of self-organized 3D quantum dot crystals. However, his work is much broader than this, as indicated by the wide selection of topics which are represented in this special issue. Günther began his scientific career in Vienna, became associate Professor at the University of Ulm after habilitation at the Rheinisch-Westfälische Technische Hochschule Aachen, Germany, and then ascended to a full professorship at the Montanuniversität, Leoben, Austria, in 1980. He subsequently moved to the Johannes Kepler Universität, Linz, Austria, in 1990. Apart from his outstanding scientific achievements, Günther is also known for organizing the biannual winterschool on 'New Developments in Solid State Physics' beginning in 1980. Initially, he worked at this task together with Helmut Heinrich (until 2000) and Friedl Kuchar (1984 until now) and subsequently with Wolfgang Jantsch (who followed Helmut Heinrich in 2002). This winterschool was, and remains, very important in identifying new trends in solid state physics, and thus has a number of important proponents in the scientific community. It was at one of the first of these winterschools where the initial reports of the quantum Hall effect were presented, and it has been a meeting place where established experts (including three Nobel laureates) teach, and interact with students and young researchers. It is important to know that Günther's excellent international connections were necessary to maintain the high level of the winterschool over almost 30 years. After the first meeting in 1980 in Mariapfarr, these winterschools were held thirteen

PREFACE: Asia-Pacific Interdisciplinary Research Conference 2011 (AP-IRC 2011)

NASA Astrophysics Data System (ADS)

Sandhu, Adarsh; Okada, Hiroshi; Maekawa, Toru; Okano, Ken

2012-03-01

AP-IRC Logo Scientists, engineers, entrepreneurs and policymakers gather at the first truly interdisciplinary conference held in Asia-Pacific http://www.apirc.jp/ The inaugural Asia-Pacific Interdisciplinary Research Conference 2011 (AP-IRC 2011) was held at Toyohashi University of Technology (Toyohashi Tech) on 17-18 November 2011. The conference is a forum for enhancing mutual understanding between scientists, engineers, policymakers and experts from a wide spectrum of pure and applied sciences, to resolve the daunting global issues facing mankind. The conference attracted approximately 300 participants including delegates from France, Germany, India, Indonesia, Korea, Malaysia, Russia, Sweden, United Kingdom, USA and Vietnam. AP-IRC 2011 was chaired by Dr Yoshiyuki Sakaki, President of Toyohashi Tech, who opened the proceedings by stressing the importance of an interdisciplinary approach to research, to resolve global scientific and technical issues. Recalling his own experience as the leader of Japan's efforts in the Human Genome Project, Sakaki also encouraged participants to make an effort to try to understand the sometimes difficult concepts and terminology of other areas of research. The presentations at AP-IRC 2011 were divided into three focus sessions: innovative mechano-magneto-electronic systems, life sciences, and green science and technology. A total of 174 papers were presented over the two-day conference including eight by invited speakers. Highlights of AP-IRC 2011 included a first-hand account of the damage caused by the massive earthquake in March 2011 to experimental facilities at Tohoku University by Masayoshi Esashi; the fascinating world of bees and the inborn numerical competence of humans and animals by Hans J Gross; research on robots and cognition-enabled technical systems at Technische Universität München by Sandra Hirche; the history of events leading to the invention of the world's strongest NdFeB permanent magnet by Masato Sagawa

Hydrothermal Carbonization: a feasible solution to convert biomass to soil?

NASA Astrophysics Data System (ADS)

Tesch, Walter; Tesch, Petra; Pfeifer, Christoph

2013-04-01

., Gomez-Eyles J.L., Harris H., Robinson B., Sizmur T.: A review of biochars' potential role in the remediation, revegetation and restoration of contaminated soils. Environmental Pollution (159), p. 3269 - 3282, 2011. Behrendt F.: Direktverflüssigung von Biomasse - Reaktionsmechanismen und Produktverteilungen Institut für Energietechnik, Technische Universität Berlin Studie im Auftrag der Bundesanstalt für Landwirtschaft und Ernährung; Projektnummer 114-50-10-0337/05-B, 2006. European Commission: "Roadmap to a Resource Efficient Europe", COM(2011) 571. Lehmann J., Rillig M.C., Thies J., Masiello C.A., Hockaday W.C., Crowley D.: Biochar effects on soil biota - A review, Soil Biology & Biochemistry, p. 1-25, 2011. Myers Norman: "Environmental services of biodiversity", Proc. Natl. Acad. Sci. USA Vol 93, pp. 2764 - 2769, 1996. Rillig M.C., Wagner M., Salem M., Antunes P.M., George C., Ramke H.G., Titirici M.M., Antonietti M.: Material derived from hydrothermal carbonization: effects on plant growth and arbuscular mycorrhiza. Applied Soil Ecology (45), p. 238 - 242, 2010. Vorlop K.D., Schuchardt F., Prüße U.: Hydrothermale Carbonisierung Analyse und Ausblicke. FNR-Fachgespräch, Berlin, 2009.

ogs6 - a new concept for porous-fractured media simulations

NASA Astrophysics Data System (ADS)

Naumov, Dmitri; Bilke, Lars; Fischer, Thomas; Rink, Karsten; Wang, Wenqing; Watanabe, Norihiro; Kolditz, Olaf

2015-04-01

the GitHub code hosting system (https://github.com/ufz/ogs). The very flexible revision control system Git in combination with issue tracking, developer feedback and the code review options improve the code quality and the development process in general. The continuous testing procedure of the benchmarks as it was established for OGS-5 is maintained. Additionally unit testing, which is automatically triggered by any code changes, is executed by two continuous integration frameworks (Jenkins CI, Travis CI) which build and test the code on different operating systems (Windows, Linux, Mac OS), in multiple configurations and with different compilers (GCC, Clang, Visual Studio). To improve the testing possibilities further, XML based file input formats are introduced helping with automatic validation of the user contributed benchmarks. The first ogs6 prototype version 6.0.1 has been implemented for solving generic elliptic problems. Next steps are envisaged to transient, non-linear and coupled problems. Literature: [1] Kolditz O, Shao H, Wang W, Bauer S (eds) (2014): Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media: Modelling and Benchmarking - Closed Form Solutions. In: Terrestrial Environmental Sciences, Vol. 1, Springer, Heidelberg, ISBN 978-3-319-11893-2, 315pp. http://www.springer.com/earth+sciences+and+geography/geology/book/978-3-319-11893-2 [2] Naumov D (2015): Computational Fluid Dynamics in Unconsolidated Sediments: Model Generation and Discrete Flow Simulations, PhD thesis, Technische Universität Dresden.

An Experiment to Search for Systematic Effects in Long-Lived Radioactive Decays

NASA Astrophysics Data System (ADS)

Reuter, Cassie A.

experimental design, the Modulation Experiment is particularly well-suited to monitor decay rates of various isotopes. Though decay rates are generally considered to be Poisson processes, standards offices such as the National Institute of Standards (NIST) and Physikalisch-Technische Bundesanstalt (PTB) have reported annually modulating rates due to an unknown influence. Some scientists hypothesize that these effects may be due to a solar neutrino influence. Furthermore, some scientists have also examined a potential link from solar effects (e.g. flares and storms) to discrepancies in decay rate. However, these effects may simply be the by-products of some seasonal effects. This thesis explores the reported claims of decay rate modulation, and limits annual modulation amplitudes to < 5.95x10-5 for Ti-44, 1.46x10-4 for Co-60, and 1.8x10-4 Cs-137 at a 3sigma confidence level. No additional periodicities were found to be statistically significant. The Modulation experiment is beginning to explore the true nature of the impact of systematic effects on the measured decay rate. As data continues to be collected and more setups come online, we will be able to lower statistical uncertainties on measurements the half life, measure or set further limits on time-dependent modulations and search for correlations between locations.

Reconstructing past environments and societies - interdisciplinary research in the open cast mine Jänschwalde, Germany

NASA Astrophysics Data System (ADS)

Raab, A.; Raab, T.; Takla, M.; Nicolay, A.; Müller, F.; Rösler, H.; Bönisch, E.

2012-04-01

Active lignite mines in Lower Lusatia (Brandenburg, Germany) are a controversial discussed issue. Though lignite mining destroys whole landscapes, it offers the opportunity to investigate prehistory and landscape development on a landscape scale. Since 2010 scientists from Brandenburgische Technische Universität (BTU) Cottbus and archaeologists from Brandenburgisches Landesamt für Denkmalpflege und Archäologisches Landesmuseum (BLDAM) collaborate to study human-environment interactions. Our study area is the open cast mine Jänschwalde, one out of four active lignite mines in Lower Lusatia. The mine is situated c. 150 km southeast of Berlin. Archaeological excavations have been carried out in the prefield over many years and the outcome is manifold. Different approaches are combined for a comprehensive reconstruction: archaeological investigations, geomorphological/pedological studies and historical research. The archaeological fieldwork includes prospection, the opening of test trenches and area excavations. These outcrop situations provide a view into the stratigraphy and are to some extent commonly used for archaeological and sedimentological/pedological studies. In addition, chronological information is obtained by different methods of relative and absolute (14C, OSL, dendrochronological) age determination. To build up a model for the landscape development, data (topographical maps, historical maps, physiogeographical information, etc.) is gathered and processed. The initial situation for our research is the historic charcoal burning in the former "königliche Taubendorfer Forst" and its impact on the environment. In the study area, this trade was carried out from the c. 17th to the 19th century and is very well documented by about 700 excavated ground plans of circular upright kilns and another c. 300 prospected kilns. It is assumed that charcoal was produced for the smelter at Peitz nearby, where bog iron ore was processed since 1567. There is

The German approach to emergency/disaster management.

PubMed

Domres, B; Schauwecker, H H; Rohrmann, K; Roller, G; Maier, G W; Manger, A

2000-01-01

Disaster control and disaster relief in Germany are public tasks. But the government has shifted the responsibility of the administration of these tasks to the 16 states, the so called "Lander", because the EFG is a federal republic. The same is valid for the civil defense and the civil protection in the case of military or international risks. The 16 states are also responsible for the legislation of rescue service, fire fighting service and disaster control (natural and technical disasters). Counties and district-free cities are responsible for the organisation of these services. The German system is based on the principle of subsidiary between official and private institutions. A lot of official and private relief organisations are responsible for the execution of disaster relief tasks. In Germany the following organisations exist: Official (GO): Technisches Hilfswerk (THW/Federal Technical Support Service), Feuerwehren (Fire Brigades/professionals and volunteers) Academie of Emergency Planning and Civil Defense Private (NGO): Arbeiter-Samariter-Bund Deutschland (ASB/Workers' Samaritan Association Germany), Deutsche Gesellschaft zur Rettung Schiffbruchiger (DGzRS, German Lifesaving Association), Deutsches Rotes Kreuz (DRK/German Red Cross), Johanniter-Unfall-Hilfe (JUH/St. John's Ambulance), Malteser Hilfsdienst (MEID/Maltese-Relief-Organisation). ASB, DRK, JUH and MHD are specialised in the field of rescue, medical and welfare services and medical disaster relief. 80% of the German rescue service and 95% of the German disaster medical relief are realised by these NGO's. NGO's and GO's employ more than 1.2 million volunteers and appr. 100,000 professionals. Rescue service is carried out by professionals, disaster relief by volunteers. The German constitution allows to call the federal army in case of disaster, to support the disaster relief organisations (for example: flood Oder River 1997, train-crash "ICE" 1998). In all counties and district free cities

An analytical tool that quantifies cellular morphology changes from three-dimensional fluorescence images.

PubMed

Haass-Koffler, Carolina L; Naeemuddin, Mohammad; Bartlett, Selena E

2012-08-31

detection of the 3D neuronal filament-like however, this module has been developed to measure defined structures such as neurons, which are comprised of dendrites, axons and spines (tree-like structure). This module has been ingeniously utilized to make morphological measurements to non-neuronal cells, however, the output data provide information of an extended cellular network by using a software that depends on a defined cell shape rather than being an amorphous-shaped cellular model. To overcome the issue of analyzing amorphous-shaped cells and making the software more suitable to a biological application, Imaris developed Imaris Cell. This was a scientific project with the Eidgenössische Technische Hochschule, which has been developed to calculate the relationship between cells and organelles. While the software enables the detection of biological constraints, by forcing one nucleus per cell and using cell membranes to segment cells, it cannot be utilized to analyze fluorescence data that are not continuous because ideally it builds cell surface without void spaces. To our knowledge, at present no user-modifiable automated approach that provides morphometric information from 3D fluorescence images has been developed that achieves cellular spatial information of an undefined shape (Figure 1). We have developed an analytical platform using the Imaris core software module and Imaris XT interfaced to MATLAB (Mat Works, Inc.). These tools allow the 3D measurement of cells without a pre-defined shape and with inconsistent fluorescence network components. Furthermore, this method will allow researchers who have extended expertise in biological systems, but not familiarity to computer applications, to perform quantification of morphological changes in cell dynamics.

Franz Ulinski, an Almost Forgotten Early Pioneer of Rocketry

NASA Astrophysics Data System (ADS)

Besser, B. P.

2002-01-01

During the early period of rocket development several pioneers originating from the former Austro-Hungarian empire contributed their ideas to the new field of rocketry. The most well known - regarded as the "father of rocketry" in Western Europe - is Hermann Oberth. The others were Max Valier, Franz von Hoefft, Guido von Pirquet, Hermann Potocnik, Friedrich Schmiedl, Franz Ulinski, Eugen Saenger and others. Franz Ulinski (1890-1974) was born 1890 in Blosdorf, Moravia (now Mljadejow, Czech Republic). After attending schools in Wels, Upper Austria, he started a career in the Austro-Hungarian Army in 1910. During his service he worked beginning 1917 at an airplane engine plant in Fischamend and in 1919/20 at the "Fliegerarsenal" (aircraft arsenal) in Vienna. End of 1920 the army of the remaining republic of Austria had to severely reduce its forces and Ulinski was superannuated without further payment. Since 1917 he was also inscribed at the College for Advanced Technology in Vienna ("Technische Hochschule Wien"), but he never graduated, instead he autodidactically attained the VDI-Engineering-Diploma (VDI = "Verein Deutscher Ingenieure"- Association of German Engineers). During 1921-1924 he worked as a development engineer and later as a design engineer for a car factory. In 1925 he set up and ran his own company (radio sale enterprise) and in 1929 an engineering workshop. From 1938 to 1945 he first served as technical staff and later as a design engineer at the Siebel- Flugzeugwerke (Airplane-Factory) in Halle/Saale, Germany. After the Second World War he was employed as a design engineer at different engineering companies in Austria and he died 1974 in Wels. Ulinski's first contact with the topic of space flight occurred during the time period when he was a member of the Austro- Hungarian Army. Ulinski was one of the first in the german speaking part of Europe to publish an article with his ideas about space flight in 1920 (three years before Herman Oberth

Light scattering by dust particles (PROGRA2 experiment): size and structure effects for transparent and absorbing materials

NASA Astrophysics Data System (ADS)

Hadamcik, E.; Renard, J.-B.; Lasue, J.; Levasseur-Regourd, A. C.

2007-08-01

is found for compact grains, larger than the wavelength. Mixtures of fluffy silica and fined grained amorphous carbon or better Mg-Fe silicates with amorphous carbon are excellent cometary particles analogues (as light scattering is concerned) if they are mixed with some compact micron-sized grains [9]. Nevertheless the structure of the aggregates seems to play a major role to obtain the negative branch found on the polarimetric phase curves for comets [10]. 5- Discussion and conclusions The experiments purpose is to help to disentangle the different physical properties of dust particles that can be deduced from remote observations (cometary dust, regoliths). Differences between the main parameters influencing the variations of Pmax and the presence of a negative branch on the polarimetric phase curves for lifted and deposited particles (in huge agglomerates or not) will be discussed. Acknowledgments: Technische Universität Carolo-Wilhelmina, Braunschweig, Deutschland (Pr Blum, Dr Schräpler); University of New Mexico, Albuquerque, USA (Pr Rietmeijer); NASA Goddard Space Flight Center, Maryland, USA (Dr Nuth) References [1] A.C. Levasseur-Regourd, E. Hadamcik, JQSRT 79-80, 903 (2003) [2] J. Lasue, A.C. Levasseur-Regourd, JQSRT 100, 220 (2006) [3] J.-B. Renard et al., ASR 31, 2511 (2003) [4] J.-B. Renard et al., Appl. Opt. 91, 609 (2002) [5] E. Hadamcik et al., JQSRT 106, 74 (2007) [6] J. Blum, R. Schreapler, Phys. Rev Let 93:115031 (2004) [7] J. Blum et al., Astrophys J 652, 1768 (2006) [8] R. West, Appl. Opt. 30, 5216 (1991) [9] E. Hadamcik et al., JQSRT 100, 143 (2006) [10] E. Hadamcik et al., Icarus, in press (2007)

Recharge and Transient Pore Pressure Propagation in Steep Alpine Mountain Slopes near Poschiavo, Switzerland

NASA Astrophysics Data System (ADS)

de Palézieux, Larissa; Loew, Simon; Zwahlen, Peter

2017-04-01

20-30 m below the phreatic surface. The obtained values for specific storage and the assumed values for hydraulic conductivity were then verified with a one-dimensional finite element free-surface hydraulic model under steady-state and transient conditions, again fitting the simulated values to the observed pore water pressure records. Boundary conditions were set to constant head at the foot of the column and to infiltration with seepage face review at the top of the column. The results support the observed values for hydraulic conductivity as obtained from the packer tests with low permeabilities in the intact rock mass (K=2e-8 - 3e-10 m/s) and a higher permeability in rock slide masses (around 2e-6 m/s). Furthermore, the values for specific storage found by convolution could be confirmed. Finally, the complex local hydrogeology of an alpine mountain slope with a large suspended rock slide was investigated with a 2D finite element model under steady state and transient conditions. Preliminary results support the theory of a hydraulic barrier at the base of large rock slides with a perched aquifer above and partially unsaturated conditions below the sliding plane. REFERENCES De Marsily, G. (1986), Quantitative Hydrogeology (pp. 198-199). Masson. Figi, D., Brunold, F. & Zwahlen, P. (2014), Felskennwerte - Kennwertebericht, Projekt Lagobianco. Büro für Technische Geologie AG, Sargans. Rango, A., & Martinec, J. (1995), Revisiting the Degree-Day Method for Snowmelt Computations. JAWRA Journal of the American Water Resources Association, 31(4), 657-669.

FORS am Very Large Telescope der Europäischen Südsternwarte

NASA Astrophysics Data System (ADS)

1998-09-01

von Aufnahmen verschiedener astronomischer Objekte, von denen einige hier wiedergegeben sind. Sie wurden alle mit FORS in der Standardauflösung gewonnen (Bildfeldgröße 6.8 x 6.8 Bogenminuten, Pixelgröße 0.20 Bogensekunden) und zeigen einige der eindrucksvollen Möglichkeiten, die das neue Instrument bietet. Spiralgalaxie NGC 1288 ESO PR Photo 37a/98 ESO PR Photo 37a/98 [Preview - JPEG: 800 x 908 pix - 224k] [High-Res - JPEG: 3000 x 3406 pix - 1.5Mb] Farbaufnahme der Spiralgalaxie NGC 1288, aufgenommen in der ersten Beobachtungsnacht von FORS ("Nacht des ersten Lichts"). Das erste Photo zeigt eine Dreifarbenaufnahme der schönen Spiralgalaxie NGC 1288 im südlichen Sternbild Fornax. PR Photo 37a/98 umfaßt das gesamte Feld, das mit der 2048 x 2048 Pixel großen CCD-Kamera abgebildet wurde. Es wurde aus drei CCD-Aufnahmen zusammengesetzt, die bei gutem Seeing in verschiedenen Farben in der "Nacht des ersten Lichts" (15. September 1998) aufgenommen wurden. Diese Galaxie mit einem Durchmesser von rund 200000 Lichtjahren ist etwa 300 Millionen Lichtjahre entfernt, ihre Fluchtgeschwindigkeit beträgt 4500 km/sec. Technische Informationen : Photo 37a/98 ist ein Komposit von drei Aufnahmen in den drei Filtern B (420nm, 6 Minuten belichtet), V (530nm, 3 Minuten) und I (800nm, 3 Minuten) während einer Periode mit 0.7 Bogensekunden Seeing. Das gezeigte Feld ist 6.8 x 6.8 Bogenminuten groß. Norden ist links, Osten unten. Entfernter Galaxienhaufen ESO PR Photo 37b/98 ESO PR Photo 37b/98 [Preview - JPEG: 657 x 800 pix - 248k] [High-Res - JPEG: 2465 x 3000 pix - 1.9Mb] Ein ungewöhnlicher Galaxienhaufen in der Umgebung des Quasars PB5763 . ESO PR Photo 37c/98 ESO PR Photo 37c/98 [Preview - JPEG: 670 x 800 pix - 272k] [High-Res - JPEG: 2512 x 3000 pix - 1.9Mb] Vergrößerung von PR Photo 37b/98; sie zeigt mehr Einzelheiten des ungewöhnlichen Galaxienhaufens. Die nächsten Photos wurden von einer 5-minütigen Aufnahme im Nahen Infrarot reproduziert, die ebenfalls in der "Nacht

KEY COMPARISON: Results of the APMP Pressure key comparison APMP.M.P-K1c in gas media and gauge mode from 0.4 MPa to 4.0 MPa

NASA Astrophysics Data System (ADS)

Bandyopadhyay, A. K.; Woo, Sam Yong; Fitzgerald, Mark; Man, John; Ooiwa, Akira; Jescheck, M.; Jian, Wu; Fatt, Chen Soo; Chan, T. K.; Moore, Ken; El-Tawil, Alaaeldin A. E.

2003-01-01

This report summarizes the results of a regional key comparison (APMP-IC-2-97) under the aegis of the Asia Pacific Metrology Program (APMP) for pressure measurements in gas media and in gauge mode from 0.4 MPa to 4.0 MPa. The transfer standard was a pressure-balance with a piston-cylinder assembly with nominal effective area 8.4 mm2 (V-407) and was supplied by the National Metrology Institute of Japan [NMIJ]. Ten standard laboratories from the APMP region with one specially invited laboratory from the EUROMET region, namely Physikalisch-Technische Bundesanstalt (PTB), Germany, participated in this comparison. The comparison started in October 1998 and was completed in May 2001. The pilot laboratory prepared the calibration procedure [1] as per the guidelines of APMP and the International Bureau of Weights and Measures (BIPM) [2-4]. Detailed instructions for performing this key comparison were provided in the calibration protocol [1] and the required data were described in: (1) Annex 3 - characteristics of the laboratory standards, (2) Annex 4 - the effective area (A'p'/mm2) (the prime indicates values based on measured quantities) at 23°C of the travelling standard as a function of nominal pressure (p'/MPa) (five cycles both increasing and decreasing pressures at ten pre-determined pressure points) and (3) Annex 5 - the average effective area at 23°C (A'p'/mm2) obtained for each pressure p'/MPa with all uncertainty statements. The pilot laboratory processed the information and the data provided by the participants for these three annexes, starting with the information about the standards as provided in Annex 3. Based on this information, the participating laboratories are classified into two categories: (I) laboratories that are maintaining primary standards, and (II) laboratories that are maintaining standards loosely classified as secondary standards with a clear traceability as per norm of the BIPM. It is observed that out of these eleven laboratories, six

Influence of plant productivity over variability of soil respiration: a multi-scale approach

NASA Astrophysics Data System (ADS)

Curiel Yuste, J.

2009-04-01

general controlled by the seasonality of substrate supply by plants (via photosynthates translocation and/or litter) to soil. Although soil temperature and soil moisture exert a strong influence over the variation in SR, our results indicates that substrate supply by plant activity could exert a more important than previously expected role in the variability of soil respiration. 1. CREAF (Centre de Recerca Ecológica i Aplicacions Forestals), Unitat d'Ecofisiologia i Canvi Global CREAF-CEAB-CSIC, BELLATERRA (Barcelona), Spain (j.curiel@creaf.uab.es) 2. University of Antwerp (UA), Antwerp, Belgium (ivan.janssens@ua.ac.be) 3. Institute of Ecology, University of Innsbruck, Innsbruck, Austria (michael.bahn@uibk.ac.at) 4. UMR Ecologie et Ecophysiologie Forestières, Centre INRA de Nancy, France (longdoz@nancy.inra.fr) 5. ESPM, University of Calicornia at Berkeley, Berkeley, CA, US (baldocchi@nature.berkeley.edu) 6. The Woods Hole Research Center, Falmouth, USA (edavidson@whrc.org) 7. Max-Planck-Institute for Biogeochemistry, Jena, Germany (markus.reichstein@bgc-jena.mpg.de) 8. Institute of Systems Biology and Ecology, Academy of Sciences of the Czech Republic, Czech Republic (manuel@brno.cas.cz) 9. Università degli studi della Tuscia, Viterbo, Italy (arriga@unitus.it) 10. Laurence Berkeley lab, Berkeley, CA, USA (mstorn@lbl.gov) 11. Gembloux Agricultural University, Gembloux, Belgium (aubinet.m@fsagx.ac.be) 12. Fundacion CEAM(Centro de Estudios Ambientales del Mediterráneo), Valencia, Spain (arnaud@ceam.es) 13. Institute of Hydrology and Meteorology, Technische Universität Dresden, Pienner, Germany (gruenwald@forst.tu-dresden.de) 14. Department of Environmental Sciences, Second University of Naples, Caserta, Italy (ilaria.inglima@unina2.it) 15. CNRS-CEFE Montpellier, France (Laurent.MISSON@cefe.cnrs.fr) 16. Agenzia Provinciale per l'Ambiente, Bolzano, Italy (leonar@inwind.it) 17. University of Helsinki Department of Forest Ecology, Helsinki, Finland (jukka

N2O and CH4-emissions from energy crops - Can the use of organic fertilizers in form of biogas digestate be considered as a real alternative? Results from a three and a half year multi-site field study of energy crops fertilized with biogas digestate in so

NASA Astrophysics Data System (ADS)

Heintze, Gawan

2016-04-01

Gawan Heintze1,2, Matthias Drösler1, Ulrike Hagemann3and Jürgen Augustin3 1University of Applied Sciences Weihenstephan-Triesdorf, Chair of Vegetation Ecology, Weihenstephaner Berg 4, 85354 Freising, Germany 2Technische Universität München, Chair of Plant Nutrition, Emil-Ramann-Str. 2, 85354 Freising, Germany 3Leibniz Centre for Agricultural Landscape Research (ZALF), Eberswalder Straße 84, 15374 Müncheberg, Germany Together with industrial process-related emissions (8.1%) the actual GHG emissions from agriculture (7.5% - 70 million tones (Mt) of carbon dioxide (CO2)-equivalents) representing after energy-related emissions from combustion processes of fossil fuels (83.7%) the second largest budget of the Germany-wide total emissions per year. To reduce the EU's CO2 emissions by 20% by 2020 the cultivation of energy crops for biogas production, ideally coupled to a subsequent return of the resulting residues in form of biogas digestate is intended as one key element in the pathway of renewable energy production. Despite an increasing cultivation of energy crops for the production of biogas aiming to reduce the overall climate impact of the agricultural sector, it is still largely unknown how the application of ammonia-rich organic digestate effects field N2O emissions. Therefore, the collaborative research project "potential for reducing the release of climate-relevant trace gases in the cultivation of energy crops for the production of biogas" was launched. The main objective of the study was to determine an improved process understanding and to quantify the influence of mineral nitrogen fertilization, biogas digestate application, crop type and crop rotation, to gain precise and generalizable statements on the exchange of trace gases like nitrous oxide (N2O) and methane (CH4) on the resulting climate impact. Gas fluxes of N2O and CH4 were measured for three and a half years on two differently managed sites in maize monoculture with different applied organic

PREFACE: Fundamental Constants in Physics and Metrology

NASA Astrophysics Data System (ADS)

Klose, Volkmar; Kramer, Bernhard

1986-01-01

This volume contains the papers presented at the 70th PTB Seminar which, the second on the subject "Fundamental Constants in Physics and Metrology", was held at the Physikalisch-Technische Bundesanstalt in Braunschweig from October 21 to 22, 1985. About 100 participants from the universities and various research institutes of the Federal Republic of Germany participated in the meeting. Besides a number of review lectures on various broader subjects there was a poster session which contained a variety of topical contributed papers ranging from the theory of the quantum Hall effect to reports on the status of the metrological experiments at the PTB. In addition, the participants were also offered the possibility to visit the PTB laboratories during the course of the seminar. During the preparation of the meeting we noticed that even most of the general subjects which were going to be discussed in the lectures are of great importance in connection with metrological experiments and should be made accessible to the scientific community. This eventually resulted in the idea of the publication of the papers in a regular journal. We are grateful to the editor of Metrologia for providing this opportunity. We have included quite a number of papers from basic physical research. For example, certain aspects of high-energy physics and quantum optics, as well as the many-faceted role of Sommerfeld's fine-structure constant, are covered. We think that questions such as "What are the intrinsic fundamental parameters of nature?" or "What are we doing when we perform an experiment?" can shed new light on the art of metrology, and do, potentially, lead to new ideas. This appears to be especially necessary when we notice the increasing importance of the role of the fundamental constants and macroscopic quantum effects for the definition and the realization of the physical units. In some cases we have reached a point where the limitations of our knowledge of a fundamental constant and

The role of biophysical indicators in the reconstruction of long-term late-spring - summer temperatures for the region of Western Hungary and Eastern Austria

NASA Astrophysics Data System (ADS)

Kiss, Andrea; Wilson, Rob; Holawe, Franz; Strömmer, Elisabeth; Bariska, István.

2010-05-01

, Sopron and Bratislava series and all presented analyses were developed within the framework of the EU project 'Millenium'. The Austrian series are partly based on published series (Pribram 1938, Lauscher 1985, Strömmer 2003) although in some cases modified and extended for this study, as well as newly developed data. The present work is a continuation of the 'Analysis of late spring-summer temperatures for Western Hungary based on vine, grain tithes and harvest records', presented at the annual congress of EGU in 2009 (Kiss and Wilson 2009). References Böhm, R., Jones, P.D., Hiebl, J., Frank, D., Brunetti, M., Maugeri and M. 2009: The early instrumental warm-bias: a solution for long central European temperature series 1760-2007. Climatic Change, doi: 10.1007/s10584-009-9649-4. Kiss, A. and Wilson, R. 2009: Analysis of late spring-summer temperatures for Western Hungary based on vine, grain tithes and harvest records. Geophysical Research Abstracts Vol 11, EGU2009-10945-1. Lauscher, F. 1985: Beiträge zur Wetterchronik seit dem Mittelalter. In: Sitzungsberichte, Abtheilung II, Mathematische, Physikalische und Technische Wissenschaften, Band 194, Heft 1-3. pp. 93-131. Leijonhufvud, L., Wilson, R., Möberg, A., Söderberg, J., Retső, D. and Söderlind, U. 2009: Five centuries of Stockholm winter/spring temperatures reconstructed from documentary evidence and instrumental observations. Climatic Change, doi: 10.1007/s10584-009-9650-y. Pribram, A. F. 1938: Materialien zur Geschichte der Preise und Löhne in Österreich. Band. I. Carl Ueberreuters Verlag, Wien. pp. 364-370. Strömmer, E. 2003: Klima-Geschichte. Methoden der Rekonstruction und historische Perspektive. Ostösterreich 1700 bis 1830. Forschungen und Beiträge zur Wiener Stadtgescichte 39. Franz Deuticke, Wien. pp. 59-71.

Are the low-lying isovector 1 + states scissors vibrations?

NASA Astrophysics Data System (ADS)

Faessler, A.

At the Technische Hochschule in Darmstadt the group of Richter and coworkers found in 1983/84 in deformed rare earth nuclei low-lying isovector 1 + states. Such states have been predicted in the generalized Bohr-Mottelson model and in the interacting boson model no. 2 (IBA2). In the generalized Bohr-Mottelson model one allows for proton and neutron quadrupole deformations separately. If one includes only static proton and neutron deformations the generalized Bohr-Mottelson model reduces to the two rotor model. It describes the excitation energy of these states in good agreement with the data but overestimates the magnetic dipole transition probabilities by a factor 5. In the interacting boson model (IBA2) where only the outermost nucleons participate in the excitation the magnetic dipole transition probability is only overestimated by a factor 2. The too large collectivity in both models results from the fact that they concentrate the whole strength of the scissors vibrations into one state. A microscopic description is needed to describe the spreading of the scissors strength over several states. For a microscopic determination of these scissors states one uses the Quasi-particle Random Phase Approximation (QRPA). But this approach has a serious difficulty. Since one rotates for the calculation the nucleus into the intrinsic system the state corresponding to the rotation of the whole nucleus is a spurious state. The usual procedure to remove this spuriosity is to use the Thouless theorem which says that a spurious state created by an operator which commutes with the total hamiltonian (here the total angular momentum, corresponding to a rotation of the whole system) produces the spurious state if applied to the ground state. It says further the energy of this spurious state lies at zero excitation energy (it is degenerate with the ground state) and is orthogonal to all physical states. Thus the usual approach is to vary the quadrupole-quadrupole force strength so

Influence of soil organic C content on the greenhouse gas emission potential after application of biogas residues or cattle slurry - Results from a pot experiment

NASA Astrophysics Data System (ADS)

Heintze, Gawan

2017-04-01

Influence of soil organic C content on the greenhouse gas emission potential after application of biogas residues or cattle slurry - Results from a pot experiment Gawan Heintze1,2, Tim Eickenscheidt1, Urs Schmidthalter2 and Matthias Drösler1 1University of Applied Sciences Weihenstephan-Triesdorf, Chair of Vegetation Ecology, Weihenstephaner Berg 4, 85354 Freising, Germany 2Technische Universität München, Chair of Plant Nutrition, Emil-Ramann-Str. 2, 85354 Freising, Germany The European Union Renewable Energy Directive, which sets a binding target of a final energy consumption of 20% from renewable sources by 2020, has markedly promoted the increase of biogas plants, particularly in Germany. As a consequence, a large amount of biogas residue remains as a by-product of the fermentative process. These residues are now widely used instead of mineral fertilizers or animal slurries to maintain soil fertility and productivity. However, to date, the effect of the application of biogas residue on greenhouse gas (GHG) emission, compared to that of other organic fertilizers, is contradictory in literature, not having been completely understood. It is often stated that GHG fluxes are closely related to the quality of the raw material, particularly the type of soil to which the digestates are applied. This study addresses the questions (a) to what extent are the applications of biogas digestate and cattle slurry different in terms of their GHG emission (CO2, CH4 and N2O) potential, and (b) how do different soil organic carbon contents (SOCs) influence the rate of GHG exchange. We hypothesize that, i) cattle slurry application enhances the CO2 and N2O fluxes compared to the biogas digestate due to the overall higher C and N input, and ii) that with increasing SOC and N content, higher emissions of CO2 and N2O can be expected. The study was conducted as a pot experiment. Biogas digestate and cattle slurry were applied to and incorporated into three different soil types with

SoCRocket: A Virtual Platform for SoC Design

NASA Astrophysics Data System (ADS)

Fossati, Luca; Schuster, Thomas; Meyer, Rolf; Berekovic, Mladen

2013-08-01

approach in this sense, enabling embedded software developers to start development earlier in the system design cycle, and cutting the dependency on the physical system hardware. In order to successfully implement the described methodologies, it is requested to have access to the a wide selection of IP-Cores (and related SystemC/TLM models) and access to the latest Electronic Design Automation (EDA, [17]) tools. On the one hand, for what concerns the European Space landscape, such IP-Cores are provided by the European Space Agency [4] and a few other suppliers (e.g Aeroflex Gaisler with GRLIB [2]). On the other hand, for what concerns the related high abstraction models and related design methodologies (partly depicted in Figure 1), the European Space Agency, through the Braunschweig Technische Universitat, has started the development of the SoCRocket Virtual Platform [8]. Together with the Virtual Platform infrastructure SoCRocket contains a library of IP-Core models. The SoCRocket library has been built around the TrapGen LEON instruction set simulator [15]. The library contains a variety of SystemC simulation models such as caches, memory management unit, AMBA interconnect, memory controller, memories, interrupt controller, timer and more. All models are TLM2.0 compliant and come in both loosely-timed and approximately timed coding styles. As later-on presented more in detail, the runtime reconfiguration, the completeness of tools and models, as well as the fact that all simulation IPs have a freely available RTL counterpart differentiates SoCRocket from other commercially available Virtual Platforms. Moreover, due to their TLM2.0 compliance the provided models are not bound to the SoCRocket environment but they can be used with alternative tools, such as Cadence Virtual Platform [3] or Synopsys Platform Architect [10]. The paper is organized as follows: Section 2 presents the architecture of SoCRocket and the related library of SystemC models. Finally Section 3 shows

EDITORIAL: Nanoscale metrology Nanoscale metrology

NASA Astrophysics Data System (ADS)

Picotto, G. B.; Koenders, L.; Wilkening, G.

2009-08-01

Instrumentation and measurement techniques at the nanoscale play a crucial role not only in extending our knowledge of the properties of matter and processes in nanosciences, but also in addressing new measurement needs in process control and quality assurance in industry. Micro- and nanotechnologies are now facing a growing demand for quantitative measurements to support the reliability, safety and competitiveness of products and services. Quantitative measurements presuppose reliable and stable instruments and measurement procedures as well as suitable calibration artefacts to ensure the quality of measurements and traceability to standards. This special issue of Measurement Science and Technology presents selected contributions from the Nanoscale 2008 seminar held at the Istituto Nazionale di Ricerca Metrologica (INRIM), Torino, in September 2008. This was the 4th Seminar on Nanoscale Calibration Standards and Methods and the 8th Seminar on Quantitative Microscopy (the first being held in 1995). The seminar was jointly organized by the Nanometrology Group within EUROMET (The European Collaboration in Measurement Standards), the German Nanotechnology Competence Centre 'Ultraprecise Surface Figuring' (CC-UPOB), the Physikalisch-Technische Bundesanstalt (PTB) and INRIM. A special event during the seminar was the 'knighting' of Günter Wilkening from PTB, Braunschweig, Germany, as the 1st Knight of Dimensional Nanometrology. Günter Wilkening received the NanoKnight Award for his outstanding work in the field of dimensional nanometrology over the last 20 years. The contributions in this special issue deal with the developments and improvements of instrumentation and measurement methods for scanning force microscopy (SFM), electron and optical microscopy, high-resolution interferometry, calibration of instruments and new standards, new facilities and applications including critical dimension (CD) measurements on small and medium structures and nanoparticle

IN MEMORIAM: Hermann Anton Haus, 1925 2003

NASA Astrophysics Data System (ADS)

2004-08-01

Photograph Hermann Anton Haus, an Institute Professor at the Massachusetts Institute of Technology (MIT), was to have been a Keynote Speaker at the Fluctuations and Noise in Photonics and Quantum Optics Conference, from which the papers in this special issue derive. Sadly, on May 21, 2003 - less than two weeks before the conference - Professor Haus succumbed to a heart attack after arriving home in Lexington, Massachusetts, from his regular, 15-mile commute by bicycle from MIT. He was 77. Throughout his lengthy and illustrious career, Professor Haus had repeatedly and very successfully addressed problems of fluctuations and noise, with special focus on the fundamental issues that arise in quantum optics. To honour Professor Haus' legacy to our technical community, this special issue of Journal of Optics B: Quantum and Semiclassical Optics is dedicated to his memory. Professor Haus was born in Ljubljana, Slovenia, in the former Yugoslavia, on 8 August 1925. After attending the Technische Hochschule, Graz, and the Technische Hochschule, Wien, in Austria, he received his Bachelor of Science degree from Union College in Schenectady, New York in 1949. In 1951, he graduated from Rensselaer Polytechnic Institute with a Master of Science in Electrical Engineering, and came to MIT, where he earned his Doctorate of Science and joined the faculty in 1954. He was promoted to Associate Professor in 1958, to Professor in 1962, and to Elihu Thomson Professor in 1973. In 1986, he was conferred the honour of Institute Professor. Professor Haus had a lifelong fascination with noise. While still an undergraduate at Union College, he became aware of Norbert Wiener's theories of statistical phenomena - the new mathematics needed to understand and quantify the random fluctuations we refer to as noise. So it was that noise theory formed the core of Professor Haus' research during the 1950s: noise in electron beams, noise in microwave amplifiers, and noise in amplifier cascades. Two of

Entwicklung von umwelt- und naturschutzgerechten Verfahren der landwirtschaftlichen Landnutzung für das Biosphärenreservat Schorfheide-Chorin

NASA Astrophysics Data System (ADS)

Meyer-Aurich, Andreas

1999-11-01

Mit der vorliegenden Arbeit werden exemplarisch Chancen und Grenzen der Integration von Umwelt- und Naturschutz in Verfahren der ackerbaulichen Landnutzung aufgezeigt. Die Umsetzung von Zielen des Umwelt- und Naturschutzes in Verfahren der Landnutzung ist mit verschiedenen Schwierigkeiten verbunden. Diese liegen zum einen in der Konkretisierung der Ziele, um diese umsetzen zu können, zum anderen in vielfach unzulänglichem Wissen über den Zusammenhang zwischen unterschiedlichen Formen der Landnutzung und insbesondere den biotischen Naturschutzzielen. Zunächst wird die Problematik der Zielfestlegung und Konkretisierung erörtert. Das Umweltqualitätszielkonzept von Fürst et al. (1992) stellt einen Versuch dar, Ziele des Umwelt- und Naturschutzes zu konkretisieren. Dieses Konzept haben Heidt et al. (1997) auf einen Landschaftsausschnitt von ca. 6000 ha im Biosphärenreservat Schorfheide-Chorin im Nordosten Brandenburgs angewendet. Eine Auswahl der von Heidt et al. (1997) formulierten Umweltqualitätsziele bildet die Basis dieser Arbeit. Für die ausgewählten Umweltqualitätsziele wurden wesentliche Einflussfaktoren der Landnutzung identifiziert und ein Bewertungssystem entwickelt, mit dem die Auswirkungen von landwirtschaftlichen Anbauverfahren auf diese Umweltqualitätsziele abgebildet werden können. Die praktizierte Landnutzung von 20 Betrieben im Biosphärenreservat Schorfheide-Chorin wurde von 1994 bis 1997 hinsichtlich ihrer Auswirkungen auf die Umweltqualitätsziele analysiert. Die Analyse ergab ein sehr differenziertes Bild, das zum Teil Unterschiede in der Auswirkung auf die Umweltqualitätsziele für den Anbau einzelner Kulturen oder für bestimmte Betriebstypen zeigte. Es zeigte sich aber auch, dass es bei der Gestaltung des Anbaus einzelner Kulturarten große Unterschiede gab, die für Umweltqualitätsziele Bedeutung haben. Neben der Analyse der Landnutzung im Biosphärenreservat Schorfheide-Chorin wurde ein System entwickelt, mit dem die modellhafte

Dedication: phys. stat. sol. (a) 202/15

NASA Astrophysics Data System (ADS)

Albrecht, Martin

2005-12-01

The papers in this issue are dedicated to Professor Horst Paul Strunk on the occasion of his 65th birthday and his retirement from active teaching. This volume honours a scientist who has made a lasting impact on the field in electron microscopic characterisation of growth and relaxation phenomena in epitaxial growth of semiconductors. Born in The Hague, The Netherlands, on 13 June 1940, he studied physics in Stuttgart where he received his degree in Physics in 1968. He joined the group of Prof. Seeger at the Max-Planck-Institut für Metallforschung and defended his Ph.D. on defects in NaCl at Stuttgart University in 1973. He spent one year at Cornell University as a visiting Professor before joining Technische Universität Hamburg-Harburg in 1983. There he created the Zentralbereich Elektronenmikroskopie and was a professor for materials analytics from 1983 till 1989. In 1989 he changed to the University of Erlangen-Nürnberg, where he established the Verbundlabor für hochauflösende Elektronenmikroskopie and directed the Lehrstuhl Mikrocharakterisierung at the Institut für Werkstoffwissenschaften of the same university. He spent two research periods at the Universities of Rennes in France and Campinas in Brazil. Together with his colleague Prof. Jürgen Werner he created the series of conferences on polycrystalline semiconductors POLYSE which he has been supervising together with Jürgen Werner since 1990.The research activities of Horst P. Strunk are focused on microstructure of materials and their relation to macroscopic physical properties. Main topics are dislocations, their formation and interaction mechanisms, strain relaxation as well as fundamental mechanisms of epitaxial growth. The spectrum of materials covers a wide range starting from metals over ionic crystals, e.g. NaCl to elemental and compound semiconductors. From the beginning, the main tool of study has been the transmission electron microscope. However, Horst P. Strunk recognised that a

EDITORIAL: Focus on Carbon Nanotubes

NASA Astrophysics Data System (ADS)

2003-09-01

.4 nm single-walled carbon nanotubes templated in the channels of AlPO4-5 single crystals Z K Tang, N Wang, X X Zhang, J N Wang, C T Chan and Ping Sheng Lattice dynamics and symmetry of double wall carbon nanotubes M Damnjanovic, E Dobardzic, I Milosevic, T Vukovic and B Nikolic Optical characterization of single-walled carbon nanotubes synthesized by catalytic decomposition of alcohol Shigeo Maruyama, Yuhei Miyauchi, Yoichi Murakami and Shohei Chiashi Christian Thomsen, Technische Universität Berlin, Germany Hiromichi Kataura, Tokyo Metropolitan University, Japan

EDITORIAL: Advances in Measurement Technology and Intelligent Instruments for Production Engineering

NASA Astrophysics Data System (ADS)

Gao, Wei; Takaya, Yasuhiro; Gao, Yongsheng; Krystek, Michael

2008-08-01

the other papers, two are related to length measurement, which forms the basis of dimensional measurement. Schödel et al from Physikalisch Technische Bundesanstalt (PTB) describe the recent state of thermal expansion measurements with PTB's Precision Interferometer, which are based on the observation of the absolute length of samples by using phase stepping interferometry. Meiners-Hagen et al, also from PTB, investigate an improved method for compensation of the refractive index of air in length measurements by optical interferometry where the air pressure and the humidity are measured. Three papers concern surface metrology. Song et al from NIST (National Institutes of Standards and Technology) report topography measurement for determining the decay factors in surface replication of Standard Casing to support ballistics measurements in the US. Takahashi et al from the University of Tokyo present a lateral resolution improvement for a total internal reflection fluorescence microscope that employs the combined use of standing evanescent light and a scattering distribution retrieval algorithm with successive approximation. X Liu et al from Warwick University report on a new investigation into how surface topography and friction affect the touch-feel perception, with the results showing that both the measured roughness and friction coefficient have a strong correlation with rough-smooth and grippy-slippery feelings. Measurement algorithms and calibration are described in the following three papers. Hessling from SP Technical Research Institute of Sweden presents a general unprecedented framework for dynamic evaluation of measurement systems, which separates physical experiments, analysis and signal processing methods into succeeding steps of evaluations. Wübbeler et al from PTB illustrate the Monte Carlo method required for the numerical calculations of the probability density function approach, which has been proposed for evaluation of measurement uncertainty

List of Participants

NASA Astrophysics Data System (ADS)

2011-09-01

.typel@gsi.de UesakaTomohiroUniversity of Tokyouesaka@cns.s.u-tokyo.ac.jp UrbanMichaelIPN Orsayurban@ipno.in2p3.fr Van IsackerPietGANIL Caenisacker@ganil.fr VigezziEnricoINFN Milanovigezzi@mi.infn.it ViñasXavierUniversitat de Barcelonaxavier@ecm.ub.es Vinh MauNicoleIPN Orsayvinhmau@ipno.in2p3.fr VitturiAndreaINFN Padovavitturi@pd.infn.it Von OertzenWolframHelmholtz Zentrum Berlinoertzen@helmholtz-berlin.de WambachJochenTechnische Universität Darmstadtjochen.wambach@physik.tu-darmstadt.de WlazłowskiGabrielWarsaw University of Technologygabrielw@if.pw.edu.pl YamadaTaiichiKanto Gakuin University, Yokohamayamada@kanto-gakuin.ac.jp YoshidaKenichiRIKEN Nishina Center, Wakokenichi.yoshida@riken.jp YoshidaSatoshiHosei University, Tokyos_yoshi@i.hosei.ac.jp

EDITORIAL: Focus on Carbon Nanotubes

NASA Astrophysics Data System (ADS)

2003-09-01

Filho, R Saito, G Dresselhaus and M S Dresselhaus FTIR-luminescence mapping of dispersed single-walled carbon nanotubes Sergei Lebedkin, Katharina Arnold, Frank Hennrich, Ralph Krupke, Burkhard Renker and Manfred M Kappes Structural properties of Haeckelite nanotubes Ph Lambin and L P Biró Structural changes in single-walled carbon nanotubes under non-hydrostatic pressures: x-ray and Raman studies Sukanta Karmakar, Surinder M Sharma, P V Teredesai, D V S Muthu, A Govindaraj, S K Sikka and A K Sood Novel properties of 0.4 nm single-walled carbon nanotubes templated in the channels of AlPO4-5 single crystals Z K Tang, N Wang, X X Zhang, J N Wang, C T Chan and Ping Sheng Lattice dynamics and symmetry of double wall carbon nanotubes M Damnjanovic, E Dobardzic, I Milosevic, T Vukovic and B Nikolic Optical characterization of single-walled carbon nanotubes synthesized by catalytic decomposition of alcohol Shigeo Maruyama, Yuhei Miyauchi, Yoichi Murakami and Shohei Chiashi Christian Thomsen, Technische Universität Berlin, Germany Hiromichi Kataura, Tokyo Metropolitan University, Japan

PREFACE: 14th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2013)

NASA Astrophysics Data System (ADS)

Fu, Wei-En

2014-03-01

''. Besides the inspiring scientific arrangements, I encourage you to taste Taiwan's wonderful gourmet cuisine, and to explore the beauty of the sweet-potato-shaped island. I wish you a joyful, fruitful and memorable stay. Victor TY Lin, PhD Chairman Local Organizing Committee Met & Props 2013 International Programme Committee Professor Mohamed El Mansori (Arts et Metiers ParisTech, France) Professor H Zahouani (Ecole Centrale de Lyon, France) Professor B-G Rosen (Halmstad University, Sweden) Professor Tom R Thomas (Halmstad University, Sweden) Professor Liam Blunt (University of Huddersfield, UK) Professor Richard Leach (National Physical Laboratory, UK) Professor Chris Brown (Worcester Polytechnic Institute, USA) Dr Jia-Ruey Duann (Center for Measurement Standards, ITRI, Taiwan) International Scientific Committee Professor H Zahouani (Ecole Centrale de Lyon, France) Dr Rolf Krüger-Sehm (Physikalisch-Technische Bundesanstalt, Germany) Professor Pawel Pawlus (Rzeszów University of Technology, Poland) Professor B-G Rosen (Halmstad University, Sweden) Professor Tom R Thomas (Halmstad University, Sweden) Professor Liam Blunt (University of Huddersfield, UK) Professor Derek Chetwynd (University of Warwick, UK) Professor Jane Jiang (University of Huddersfield, UK) Professor Richard Leach (National Physical Laboratory, UK) Professor Paul Scott (University of Huddersfield, UK) Dr Andrew Yacoot (National Physical Laboratory, UK) Professor Chris Brown (Worcester Polytechnic Institute, USA) Dr Chris Evans (University of North Carolina at Charlotte, USA) Professor Jay Raja (University of North Carolina at Charlotte, USA) Dr Ted Vorburger (National Institute of Standards and Technology, USA) Dr Andrew Baker (National Measurement Institute, Australia) Professor David Lee Butler (Nanyang Technological University, Singapore) Dr Benny Cheung (The Hong Kong Polytechnic University, China) Professor Yetai Fei (Hefei University of Technology, China) Dr Kazuya Naoi (National Metrology Institute

FOREWORD: International determination of the Avogadro constant International determination of the Avogadro constant

NASA Astrophysics Data System (ADS)

Massa, Enrico; Nicolaus, Arnold

2011-04-01

daily work. Special thanks are addressed to Peter Becker, to whom this issue is dedicated on the occasion of his retirement from work at the Physikalisch-Technische Bundesanstalt. In 1974, young Peter joined the PTB's Avogadro group which, under the direction of Peter Seyfried, followed Bonse's work and improved the measurements of the lattice parameter and the Avogadro constant [5, 6]. In 2004, Peter proposed and backed this project by taking on his shoulders the risks, the management burden and the coordination of the many relevant activities. References [1] Egidi C 1963 Phantasies on a natural unity of mass Nature 200 61-2 [2] Bonse U and Hart M 1965 An x-ray interferometer Appl. Phys. Lett. 6 155-6 [3] Deslattes R D et al 1974 Determination of the Avogadro constant Phys. Rev. Lett. 33 463-6 [4] Zosi G 1983 A neo-Pythagorean approach towards an atomic mass standard Lett. Nuovo Cimento 38 577-80 [5] Becker P et al 1981 Absolute measurement of the (220) lattice plane spacing in a silicon crystal Phys. Rev. Lett. 46 1540-3 [6] Seyfried P et al 1992 A determination of the Avogadro constant Z. Phys. B 87 289-98

Neue biosensorische Prinzipien für die Hämoglobin-A1c Bestimmung

NASA Astrophysics Data System (ADS)

Stöllner, Daniela

2002-06-01

Hämoglobin-A1c (HbA1c) ist ein Hämoglobin (Hb)-Subtypus, der durch nicht-enzymatische Glykierung des N-terminalen Valinrestes der Hämoglobin-beta-Kette entsteht. Das gemessene Verhältnis von HbA1c zum Gesamt-Hämoglobin (5-20 % bei Diabetikern) repräsentiert den Mittelwert der Blutglucosekonzentration über einen zweimonatigen Zeitraum und stellt zur Beurteilung der diabetischen Stoffwechsellage eine Ergänzung zur Akutkontrolle der Glukosekonzentration dar. Ziel der vorliegenden Arbeit war es, einen amperometrischen Biosensor für die Bestimmung des medizinisch relevanten Parameters HbA1c zu entwickeln. Durch Selektion geeigneter Bioerkennungselemente und deren Immobilisierung unter Erhalt der Bindungsfunktion für die Zielmoleküle Hämoglobin bzw. HbA1c wurden spezifische, hochaffine und regenerationsstabile Sensoroberflächen geschaffen. Für die Entwicklung des HbA1c-Biosensors wurden zwei Konzepte - Enzymsensor und Immunosensor - miteinander verglichen. Die enzymatische Umsetzung von HbA1c erfolgte mit der Fructosylamin Oxidase (FAO) aus Pichia pastoris N 1-1 unter Freisetzung von H2O2, welches sowohl optisch über eine Indikatorreaktion als auch elektrochemisch nach Einschluss der FAO in PVA-SbQ und Fixierung des Immobilisats vor einer H2O2-Elektrode nachgewiesen wurde. Die Kalibration des Enzymsensors mit der HbA1c-Modellsubstanz Fructosyl-Valin ergab Nachweisgrenzen, die ausserhalb des physiologisch relevanten HbA1c-Konzentrationsbereich lagen. Aus der Umsetzung von glykierten Peptiden mit einer nicht HbA1c analogen Aminosäurensequenz, z.B. Fructosyl-Valin-Glycin wurde zudem eine geringe HbA1c-Spezifität abgeleitet. Für den Immunosensor wurden zwei heterogene Immunoassay-Formate unter Verwendung von hochaffinen und spezifischen Antikörpern in Kombination mit Glucose Oxidase (GOD) als Markerenzym zum Nachweis von HbA1c untersucht. Beim indirekt-kompetitiven Immunoassay wurde anstelle des kompletten HbA1c-Moleküls das glykierte Pentapeptid

Light Dawns on Dark Gamma-ray Bursts

NASA Astrophysics Data System (ADS)

2010-12-01

journal Astronomy & Astrophysics on 16 December 2010 The team is composed of: J. Greiner (Max-Planck-Institut für extraterrestrische Physik [MPE], Germany), T. Krühler (MPE, Universe Cluster, Technische Universität München), S. Klose (Thüringer Landessternwarte, Germany), P. Afonso (MPE), C. Clemens (MPE), R. Filgas (MPE), D.H. Hartmann (Clemson University, USA), A. Küpcü Yoldaş¸ (University of Cambridge, UK), M. Nardini (MPE), F. Olivares E. (MPE), A. Rau (MPE), A. Rossi (Thüringer Landessternwarte, Germany), P. Schady (MPE), and A. Updike (Clemson University, USA) ESO, the European Southern Observatory, is the foremost intergovernmental astronomy organisation in Europe and the world's most productive astronomical observatory. It is supported by 14 countries: Austria, Belgium, the Czech Republic, Denmark, France, Finland, Germany, Italy, the Netherlands, Portugal, Spain, Sweden, Switzerland and the United Kingdom. ESO carries out an ambitious programme focused on the design, construction and operation of powerful ground-based observing facilities enabling astronomers to make important scientific discoveries. ESO also plays a leading role in promoting and organising cooperation in astronomical research. ESO operates three unique world-class observing sites in Chile: La Silla, Paranal and Chajnantor. At Paranal, ESO operates the Very Large Telescope, the world's most advanced visible-light astronomical observatory and VISTA, the world's largest survey telescope. ESO is the European partner of a revolutionary astronomical telescope ALMA, the largest astronomical project in existence. ESO is currently planning a 42-metre European Extremely Large optical/near-infrared Telescope, the E-ELT, which will become "the world's biggest eye on the sky".

Book Review:

NASA Astrophysics Data System (ADS)

Poisson, E.

2006-09-01

and researchers should turn to in order to get a complete and accessible education in radiation reaction? My answer is that while the book does indeed contain a lot of useful material, it is not a very accessible source of information, and it is certainly not a student-friendly textbook. Instead, the book presents a technical account of the author's personal take on the theory, and represents a culminating summary of the author's research contributions over more than a decade. The book is written in a fairly mathematical style (the author is Professor of Mathematical Physics at the Technische Universitat in Munich), and it very much emphasises mathematical rigour. This makes the book less accessible than I would wish it to be, but this is perhaps less a criticism than a statement about my taste, expectation, and attitude. The presentation of the classical theory begins with a point particle, but Spohn immediately smears the charge distribution to eliminate the vexing singularities of the retarded field. He considers both the nonrelativistic Abraham model (in which the extended particle is spherically symmetric in the laboratory frame) and the relativistic Lorentz model (in which the particle is spherical in its rest frame). In Spohn's work, the smearing of the charge distribution is entirely a mathematical procedure, and I would have wished for a more physical discussion. A physically extended body, held together against electrostatic repulsion by cohesive forces (sometimes called Poincaré stresses) would make a sound starting point for a classical theory of charged particles, and would have nicely (and physically) motivated the smearing operation adopted in the book. Spohn goes on to derive energy momentum relations for the extended objects, and to obtain their equations of motion. A compelling aspect of his presentation is that he formally introduces the 'adiabatic limit', the idea that the external fields acting on the charged body should have length and time

Electrical quantum standards and their role in the SI

NASA Astrophysics Data System (ADS)

Robinson, Ian; Georgakopoulos, Dimitrios

2012-12-01

power of the rf irradiation, or both, do not change the voltage). The value of this quantized Josephson voltage is equal to nfh/2e, where n is the quantum step of the current-voltage characteristic curve. In this special feature there are three papers on dc Josephson voltage standards. Solve and Stock review the programme conducted by the Bureau International des Poids et Mesures (BIPM) to perform on-site comparisons of Josephson voltage standards, and give a comprehensive analysis of the possible sources of errors of such comparisons. Behr et al summarize the developments of Josephson voltage standards at Physikalisch-Technische Bundesanstalt (PTB) and their applications in dc voltage and other areas of metrology. Finally, Georgakopoulos et al report a reduction, by a factor of a thousand, in the smallest voltage that can be generated by dc Josephson voltage standards. Although dc voltage standards are well established, significant challenges exist when extending this extremely precise technology to ac. There are two approaches to producing accurate ac voltages using the inverse Josephson effect: the programmable Josephson voltage standard (PJVS) and the pulse-driven ac voltage standard. The PJVS contains an array of Josephson junctions, organized into independently biased segments. By biasing chosen, binary-related, segments on the first quantum step (positive or negative) or zero, the array can be made to behave as a quantum digital to analogue converter. The PJVS approach can produce stepwise approximated sine waves with rms values of some volts, but it suffers from parasitic capacitances and inductances distributed in the different parts of the system and, more importantly, the voltage is not quantized during the finite transition time between successive voltage levels. Hence the output frequency of PJVS-based systems is limited to a few kilohertz. In this special feature, Jeanneret et al review the Josephson locked synthesizer, a PJVS-based system where the effect

EDITORIAL: Optical mammography: Imaging and characterization of breast lesions by pulsed near-infrared laser light (OPTIMAMM)

NASA Astrophysics Data System (ADS)

Hebden, Jeremy C.; Rinneberg, Herbert

2005-06-01

The Commission of the European Union (EU) conceived its Fifth Framework Programme (FP5) to identify the priorities for the European Union's research, technological development and demonstration activities for the period 1998-2002. By encouraging collaborative research between groups in different member countries, FP5 was intended to help solve problems the EU is facing and respond to major socio-economic challenges. The programme focused on a number of objectives and areas combining technological, industrial, economic, social and cultural aspects. A specific call was made, under its `Quality of Life and Management of Living Resources' section, for proposals which aim to explore improvements in non-invasive methods of imaging for early diagnosis and clinical evaluation of disease. Among the projects successfully funded under the FP5 programme was one entitled `Optical mammography: Imaging and characterization of breast lesions by pulsed near-infrared laser light', known by its acronym OPTIMAMM. The project involved a consortium of nine partners, comprising ten applied science and clinical research groups based in six EU countries, with overall administration and management provided by the Physikalisch-Technische Bundesanstalt, Berlin, Germany. The broad aim of the OPTIMAMM project was to combine multi-disciplinary basic (physics, engineering, mathematics, computer science) and clinical (oncology, histology) research to assess the diagnostic potential of time-domain optical and photoacoustic mammography as novel, non-invasive imaging modalities for the detection and clinical evaluation of breast lesions. Funding for the project, at a total cost of about 1.67 MEuro, began in December 2000 for a period of three years, although a zero-cost extension was granted to enable the ongoing project activities to continue until the end of May 2004. The importance of developing new tools for the detection and diagnosis of breast disease is evident from the very high incidence and

Entwicklung von Landnutzungsszenarien für landschaftsökologische Fragestellungen

NASA Astrophysics Data System (ADS)

Fritsch, Uta

2002-04-01

Die Landschaften Mitteleuropas sind das Resultat einer langwierigen Geschichte menschlicher Landnutzung mit ihren unterschiedlichen, z.T. konkurrierenden Nutzungsansprüchen. Durch eine überwiegend intensive Beanspruchung haben die direkten und indirekten Auswirkungen der Landnutzung in vielen Fällen zu Umweltproblemen geführt. Die Disziplin der Landschaftsökologie hat es sich zur Aufgabe gemacht, Konzepte für eine nachhaltige Nutzung der Landschaft zu entwickeln. Eine wichtige Fragestellung stellt dabei die Abschätzung der möglichen Folgen von Landnutzungsänderungen dar. Für die Analyse der relevanten Prozesse in der Landschaft werden häufig mathematische Modelle eingesetzt, welche es erlauben die Landschaft unter aktuellen Verhältnissen oder hinsichtlich veränderter Rahmenbedingungen zu untersuchen. Die hypothetische Änderung der Landnutzung, die als Landnutzungsszenario bezeichnet wird, verkörpert eine wesentliche Modifikation der Rahmenbedingungen, weil Landnutzung mageblich Einfluss auf die natürlichen Prozesse der Landschaft nimmt. Während die Antriebskräfte einer solchen Änderung überwiegend von sozio-ökonomischen und politischen Entscheidungen gesteuert werden, orientiert sich die exakte Verortung der Landnutzungsänderungen an den naturräumlichen Bedingungen und folgt z.T. erkennbaren Regeln. Anhand dieser Vorgaben ist es möglich, räumlich explizite Landnutzungsszenarien zu entwickeln, die als Eingangsdaten für die Modellierung verschiedener landschaftsökologischer Fragestellungen wie z.B. für die Untersuchung des Einflusses der Landnutzung auf den Wasserhaushalt, die Erosionsgefahr oder die Habitatqualität dienen können. Im Rahmen dieser Dissertation wurde das rasterbasierte deterministische Allokationsmodell luck (Land Use Change Scenario Kit) für die explizite Verortung der Landnutzungsänderungen entwickelt. Es basiert auf den in der Landschaftsökologie üblichen räumlichen Daten wie Landnutzung, Boden sowie Topographie

EDITORIAL: Announcing the 2010 Measurement Science and Technology Outstanding Paper Awards Announcing the 2010 Measurement Science and Technology Outstanding Paper Awards

NASA Astrophysics Data System (ADS)

Foss, John; Dewhurst, Richard; Fujii, Kenichi; Regtien, Paul

2011-06-01

is measured by the effective Q-factor. Recognizing that many factors influence the Q-factor, the authors conduct a careful study comparing measurements with simulations based on the size of the cantilever. Furthermore, they introduce a methodology to investigate in detail how the effective Q-factor depends on the fixation technique of the cantilever, and describe a strategy for avoiding fixation loss. By taking the necessary care in mounting the cantilever, they show that it is possible to routinely obtain an effective Q-factor in NC-AFM measurements in high or ultra-high vacuum that is within a 20% margin of the intrinsic Q-factor. As a result, the Q-factor that realistically can be expected in a NC-AFM system defines a principal limit of the minimum detectable force gradient for room temperature measurements of the order of 10-6 N m-1. Several features in the format of the article help to make this an excellent paper. Following an informative abstract, the introduction sets the background for the novelty of the paper, before a detailed account in the following sections. The results section is detailed and convincing, and leads to a set of concise quantitative conclusions. There is also a good set of 33 references at the end of the paper. This paper was rated as excellent by the external referees in the initial refereeing process. It is one of 28 papers nominated this year for the best paper award in measurement science, and it gained the most votes from those shortlisted. It is bound to make an impact in the field of atomic force microscopy. 2010 Award Winner—Precision Measurement Interferometric determination of the topographies of absolute sphere radii using the sphere interferometer of PTB Guido Bartl, Michael Krystek, Arnold Nicolaus and Walter Giardini Physikalisch-Technische Bundesanstalt (PTB), Bundesallee 100, D-38116 Braunschweig, Germany National Measurement Institute, Bradfield Road, West Lindfield, NSW 2070, Australia This paper [3] describes a new

EDITORIAL: Announcing the 2008 Measurement Science and Technology Outstanding Paper Awards Announcing the 2008 Measurement Science and Technology Outstanding Paper Awards

NASA Astrophysics Data System (ADS)

Foss, John; Dewhurst, Richard; Fujii, Kenichi; Regtien, Paul

2009-05-01

I Kalfas and Reza S Abhari Laboratory for Energy Conversion, Department of Mechanical and Process Engineering, ETH Zurich, Zurich, Switzerland and Department of Mechanical Engineering, Aristotle University of Thessaloniki, Greece The paper [2] describes the development of a probe for measuring time-resolved entropy fluctuations. The technique was developed for use in turbomachinery applications where knowledge of the unsteady entropy in the wake of a rotating blade row can provide significant insight into the loss (dissipation) generation mechanisms. There is no direct method to measure entropy; hence the authors use an approach where the stagnation pressure and stagnation temperature are measured on the same probe. The stagnation, or 'total', pressure has been the subject of several of the authors' papers in the last few years. The more significant challenge was the time-resolved measurement of total temperature. The high Mach numbers present in the flows of interest lead to significant temperature gradients in the probe itself which contaminate this type of measurement. The paper describes a novel probe design along with a detailed heat transfer calculation and uncertainty analysis. The fluid mechanics members of the MST Editorial and Advisory Boards—T Fansler, J Foss, M Koochesfahani, I Marusic, S Morris, K Okamoto, F Scarano, E Tomita and M Wernet—considered all papers in the Fluid Mechanics section and the others that related to fluid mechanics. In the final analysis, the strengths of this paper strongly recommended it for the Award. 2008 Award Winners—Precision Measurement Self-calibration of divided circles on the basis of a prime factor algorithm R Probst Physikalisch-Technische Bundesanstalt (PTB), Bundesallee 100, D-38116 Braunschweig, Germany This paper [3] describes a new method for the self-calibration of divided circles, which may be widely used for angle calibration of circular scales, precision polygons, indexing tables and angle encoders. In

EDITORIAL: Announcing the 2009 Measurement Science and Technology Outstanding Paper Awards Announcing the 2009 Measurement Science and Technology Outstanding Paper Awards

NASA Astrophysics Data System (ADS)

Foss, John; Dewhurst, Richard; Fujii, Kenichi; Regtien, Paul

2010-06-01

Since 1991, Measurement Science and Technology has awarded a Best Paper prize. The Editorial Board of this journal believes that such a prize is an opportunity to thank authors for submitting their work, and serves as an integral part of the on-going quality review of the journal. The current breadth of topical areas that are covered by MST has made it advisable to expand the recognition of excellent publications. Hence, since 2005 the Editorial Board have presented 'Outstanding Paper Awards' in four subject categories: Fluid Mechanics; Measurement Science; Precision Measurements; and Sensors and Sensing Systems. This year also saw the introduction of a new category—Optical and Laser-based Techniques. 2009 Award Winners—Fluid Mechanics Digital particle image velocimetry (DPIV) robust phase correlation Adric Eckstein and Pavlos P Vlachos Department of Mechanical Engineering, Virginia Tech, Blacksburg, VA, USA This paper [1] represents a valuable improvement to the phase-only correlation technique (first proposed by Wernet in this journal in 2005 (Wernet M 2005 Symmetric phase-only filtering: a new paradigm for DPIV data processing Meas. Sci. Technol. 16 601-18) for particle-image-velocimetry (PIV) measurements of fluid flow. The authors establish a sound theoretical foundation and clearly describe the working principle of their robust phase correlation method. The methodology for assessing performance is excellent. Detailed results on several internationally recognized PIV test cases are presented. The robust phase correlation method is of general applicability and therefore can be expected to have substantial impact in this very active area of fluid-mechanics measurements. 2009 Award Winner—Precision Measurement A nanonewton force facility and a novel method for measurements of the air and vacuum permittivity at zero frequencies V Nesterov Physikalisch-Technische Bundesanstalt (PTB), Bundesallee 100, D-38116 Braunschweig, Germany This paper [2] describes a

Large-scale hydrological modelling in the semi-arid north-east of Brazil

NASA Astrophysics Data System (ADS)

Güntner, Andreas

2002-07-01

zeitlichen Disaggregierung von Niederschlagszeitreihen, das in dieser Arbeit speziell für tropische konvektive Niederschlagseigenschaften angepasst wird, wird zur Erzeugung höher aufgelöster Niederschlagsdaten verwendet. Alle Modellparameter von Wasa können von physiographischen Gebietsinformationen abgeleitet werden, sodass eine Modellkalibrierung primär nicht erforderlich ist. Die Modellanwendung von Wasa für historische Zeitreihen ergibt im Allgemeinen eine gute Übereinstimmung der Simulationsergebnisse für Abfluss und Stauseespeichervolumen mit Beobachtungsdaten in unterschiedlich großen Einzugsgebieten. Die mittlere Wasserbilanz sowie die hohe monatliche und jährliche Variabilität wird vom Modell angemessen wiedergegeben. Die Grenzen der Anwendbarkeit des Modell-konzepts zeigen sich am deutlichsten in Teilgebieten mit Abflusskomponenten aus tieferen Grundwasserleitern, deren Dynamik ohne Kalibrierung nicht zufriedenstellend abgebildet werden kann. Die Modellanwendungen zeigen weiterhin: (1) Laterale Prozesse der Umverteilung von Bodenfeuchte und Abfluss auf der Hangskala, vor allem die Wiederversickerung von Oberflächenabfluss, führen auf der Skala von Einzugsgebieten zu deutlich kleineren Abflussvolumen als die einfache Summe der Abflüsse der Teilflächen. Diese Prozesse sollten daher auch in großskaligen Modellen abgebildet werden. Die unterschiedliche Ausprägung dieser Prozesse für unterschiedliche Bedingungen zeigt sich an Hand einer prozentual größeren Verringerung der Abflussvolumen in trockenen im Vergleich zu feuchten Jahren. (2) Die Niederschlagseigenschaften haben einen sehr großen Einfluss auf die hydrologische Reaktion in semiariden Gebieten. Insbesondere die durch die grobe zeitliche Auflösung des Modells und durch Interpolationseffekte unterschätzten Niederschlagsintensitäten in den Eingangsdaten und die daraus folgende Unterschätzung von Abflussvolumen müssen im Modell kompensiert werden. Ein Skalierungsfaktor in der

NARRATIVE: A short history of my life in science A short history of my life in science

NASA Astrophysics Data System (ADS)

Manson, Joseph R.

2010-08-01

cultural advantages of the city of Berlin with its concerts, opera and museums. Although I have been fortunate to be able to take my family to live in many beautiful and interesting places such as Göttingen, Jülich and Berlin, it has always been Paris and France that we remembered with the greatest fondness, probably because it was the first of our travel ventures and because our children were very young when we first went and they did a large part of their growing up there. So it was a real pleasure to have the opportunity to return to Paris for an extended summer visit in 2007, this time not at Saclay, but at the Université de Paris-Sud in its Laboratoire des Collisions Atomiques et Moléculaires (LCAM). Several times in the preceding years I had discussed and corresponded with Hocine Khemliche of that laboratory about their experiments on the scattering of ions and neutral atoms and molecules from surfaces. They had just published a paper that had attracted considerable attention on the diffraction of very fast atoms from the corrugated surface of lithium fluoride, and our discussions eventually led to an invitation to come and work with him and his colleague, Philippe Roncin. It was a real pleasure for my wife and I to return to the Paris area and to re-experience some of the things that we had done there two decades earlier, to observe the changes in culture and lifestyles that had occurred since, and to experience a whole new set of adventures. The following summer of 2008 I was Guest Professor at the Donostia International Physics Center in San Sebastian, Spain. This institute was created and is directed by Pedro Echenique and it was a great honor to be able to work in that environment and enjoy the company and discussions with all the prominent scientists there, the many guests as well as the permanent staff. In the spring and summer of 2009 I was Guest Professor in the Institut für Experimentalphysik of the Technische Universität Graz in Austria, the