7 CFR 27.16 - Inspection; weighing; samples; supervision.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Inspection; weighing; samples; supervision. 27.16... Samples § 27.16 Inspection; weighing; samples; supervision. The inspection, weighing, and sampling of... Services Office shall be (a) under the supervision of a supervisor of cotton inspection, or (b) by or under...

7 CFR 27.16 - Inspection; weighing; samples; supervision.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Inspection; weighing; samples; supervision. 27.16... Samples § 27.16 Inspection; weighing; samples; supervision. The inspection, weighing, and sampling of... Services Office shall be (a) under the supervision of a supervisor of cotton inspection, or (b) by or under...

7 CFR 800.97 - Weighing grain in containers, land carriers, barges, and shiplots.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Weighing grain in containers, land carriers, barges... (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS Weighing Provisions and Procedures § 800.97 Weighing grain in...

40 CFR 92.110 - Weighing chamber and micro-balance.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (or room) in which the particulate filters are conditioned and weighed shall be maintained at a measured temperature between 19 °C and 25 °C during all filter conditioning and weighing. (2) Humidity. The relative humidity of the chamber (or room) in which the particulate filters are conditioned and weighed...

40 CFR 92.110 - Weighing chamber and micro-balance.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (or room) in which the particulate filters are conditioned and weighed shall be maintained at a measured temperature between 19 °C and 25 °C during all filter conditioning and weighing. (2) Humidity. The relative humidity of the chamber (or room) in which the particulate filters are conditioned and weighed...

40 CFR 92.110 - Weighing chamber and micro-balance.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (or room) in which the particulate filters are conditioned and weighed shall be maintained at a measured temperature between 19 °C and 25 °C during all filter conditioning and weighing. (2) Humidity. The relative humidity of the chamber (or room) in which the particulate filters are conditioned and weighed...

40 CFR 92.110 - Weighing chamber and micro-balance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (or room) in which the particulate filters are conditioned and weighed shall be maintained at a measured temperature between 19 °C and 25 °C during all filter conditioning and weighing. (2) Humidity. The relative humidity of the chamber (or room) in which the particulate filters are conditioned and weighed...

40 CFR 92.110 - Weighing chamber and micro-balance.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (or room) in which the particulate filters are conditioned and weighed shall be maintained at a measured temperature between 19 °C and 25 °C during all filter conditioning and weighing. (2) Humidity. The relative humidity of the chamber (or room) in which the particulate filters are conditioned and weighed...

9 CFR 201.49 - Requirements regarding scale tickets evidencing weighing of livestock, live poultry, and feed.

Code of Federal Regulations, 2010 CFR

2010-01-01

... evidencing weighing of livestock, live poultry, and feed. 201.49 Section 201.49 Animals and Animal Products... regarding scale tickets evidencing weighing of livestock, live poultry, and feed. (a) Livestock. When... the weigher. (b) Poultry. When live poultry is weighed for the purpose of purchase, sale, acquisition...

76 FR 318 - Designation of Minot Grain Inspection, Inc. To Provide Official Class X Weighing Services

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-04

... Minot Grain Inspection, Inc. To Provide Official Class X Weighing Services AGENCY: Grain Inspection... of Minot Grain Inspection, Inc. to provide official Class X weighing services under the United States... designation is amended to include Class X weighing within their assigned geographic area, as specified in the...

Thermal Property Analysis of Axle Load Sensors for Weighing Vehicles in Weigh-in-Motion System

PubMed Central

Burnos, Piotr; Gajda, Janusz

2016-01-01

Systems which permit the weighing of vehicles in motion are called dynamic Weigh-in-Motion scales. In such systems, axle load sensors are embedded in the pavement. Among the influencing factors that negatively affect weighing accuracy is the pavement temperature. This paper presents a detailed analysis of this phenomenon and describes the properties of polymer, quartz and bending plate load sensors. The studies were conducted in two ways: at roadside Weigh-in-Motion sites and at a laboratory using a climate chamber. For accuracy assessment of roadside systems, the reference vehicle method was used. The pavement temperature influence on the weighing error was experimentally investigated as well as a non-uniform temperature distribution along and across the Weigh-in-Motion site. Tests carried out in the climatic chamber allowed the influence of temperature on the sensor intrinsic error to be determined. The results presented clearly show that all kinds of sensors are temperature sensitive. This is a new finding, as up to now the quartz and bending plate sensors were considered insensitive to this factor. PMID:27983704

Self-weighing throughout adolescence and young adulthood: implications for well-being

PubMed Central

Pacanowski, Carly R; Loth, Katie A; Hannan, Peter J; Linde, Jennifer A; Neumark-Sztainer, Dianne R

2015-01-01

Objective This paper describes the prevalence of self-weighing in the transition period from adolescence to young adulthood and examines cross-sectional and longitudinal associations between self-weighing and weight status, psychological, and behavioral outcomes. Design Project EAT (Eating and Activity in Teens and Young Adults), a longitudinal cohort study that assessed variables 3 times over 10 years. Participants 1,868 adolescents and young adults. Main Outcome Measures weight, BMI, weight disparity, body satisfaction, weight concern, self-esteem, depression and unhealthy weight control behaviors. Analysis cross-sectional and longitudinal. Results Significant positive correlations were found at each time point between self-weighing and weight concern for both genders. Self-weighing was significantly inversely related to self-esteem at each time point in female participants. Increases in endorsement of self-weighing were significantly related to decreases in body satisfaction and self-esteem and increases in weight concern and depression in female participants; and increases in weight concern in male participants. Conclusions and Implications Findings suggest that self-weighing may not be an innocuous behavior for young people, particularly women. Interventions should assess potential harmful consequences of self-weighing in addition to any potential benefits. It may be appropriate for clinicians to ask about self-weighing, and if frequent, explore motivations, perceived benefits, and potential adverse correlates or consequences. PMID:26566095

Weighing and Body Monitoring among College Women: The Scale Number as an Emotional Barometer

ERIC Educational Resources Information Center

Mintz, Laurie B.; Awad, Germine H.; Stinson, Rebecca D.; Bledman, Rashanta A.; Coker, Angela D.; Kashubeck-West, Susan; Connelly, Kathleen

2013-01-01

This study investigated weighing and body-monitoring behaviors, as well as psychological and behavioral reactions to weighing, among female college students. Weighing and body monitoring were engaged in by the majority of participants. Participants changed food intake and exercise based on weight. About 63% reported that the scale number impacts…

78 FR 51138 - Designation of Muncie (IN) To Provide Class X or Class Y Weighing Services

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-20

... Muncie (IN) To Provide Class X or Class Y Weighing Services AGENCY: Grain Inspection, Packers and... Grain Inspection, Inc. (East Indiana) to provide Class X or Class Y weighing services under the United... amended to include Class X or Class Y weighing within their assigned geographic area, effective July 29...

Overeat today, skip the scale tomorrow: An examination of caloric intake predicting nonadherence to daily self-weighing.

PubMed

Tanenbaum, Molly L; Ross, Kathryn M; Wing, Rena R

2016-11-01

Daily self-weighing is an effective weight loss strategy. Little is known about "micro" factors influencing nonadherence to self-weighing (e.g., daily overeating). It was hypothesized that increased caloric intake on a given day would increase odds of not self-weighing the following day. Daily self-reports of weight and caloric intake were collected from 74 adults with overweight and obesity (mean BMI = 31.2 ± 4.5 kg/m 2 , age = 50.6 ± 10 years, 69% female, 87% Caucasian) throughout a 12-week Internet-based weight management intervention. Multilevel logistic regression investigated odds of nonadherence to self-weighing on a given day based on the previous day's caloric intake. Self-monitoring adherence was high (weights: 87%; calories: 85%); adherence was associated with greater 12-week weight loss (weighing: r = -0.24, P = 0.04; calories: r = -0.26, P = 0.04). Increased caloric intake on a given day, relative to the individual's average intake, was associated with increased odds of nonadherence to self-weighing the next day (F (1,5106)  = 12.66, P = 0.0004, β = 0.001). For example, following a day of eating 300 calories more than usual, odds of not self-weighing increased by 1.33. Odds of nonadherence to self-weighing increased following a day with higher-than-usual caloric intake. Weight management interventions collecting daily self-monitoring data could provide support to participants who report increased caloric intake to prevent self-weighing nonadherence. © 2016 The Obesity Society.

Design and validation of a low cost, high-capacity weighing device for wheelchair users and bariatrics

PubMed Central

Sherrod, Brandon A.; Dew, Dustin A.; Rogers, Rebecca; Rimmer, James H.; Eberhardt, Alan W.

2017-01-01

Accessible high-capacity weighing scales are scarce in healthcare facilities, in part due to high device cost and weight. This shortage impairs weight monitoring and health maintenance for people with disabilities and/or morbid obesity. We conducted this study to design and validate a lighter, lower cost, high-capacity accessible weighing device. A prototype featuring 360 kg (800 lbs) weight capacity, a wheelchair-accessible ramp, and wireless data transmission was fabricated. Forty-five participants (20 standing, 20 manual wheelchair users, and 5 power wheelchair users) were weighed using the prototype and a calibrated scale. Participants were surveyed to assess perception of each weighing device and the weighing procedure. Weight measurements between devices demonstrated a strong linear correlation (R2=0.997) with absolute differences of 1.4±2.0% (mean±SD). Participant preference ratings showed no difference between devices. The prototype weighed 11 kg (38%) less than the next lightest high-capacity commercial device found by author survey. The prototype’s estimated commercial price range, $500–600, is approximately half the price of the least expensive commercial device found by author survey. Such low cost weighing devices may improve access to weighing instrumentation, which may in turn help eliminate current health disparities. Future work is needed to determine the feasibility of market transition. PMID:27450105

How do women feel about being weighed during pregnancy? A qualitative exploration of the opinions and experiences of postnatal women.

PubMed

Allen-Walker, Virginia; Mullaney, Laura; Turner, Michael J; Woodside, Jayne V; Holmes, Valerie A; McCartney, Daniel Ma; McKinley, Michelle C

2017-06-01

to explore routine weighing in antenatal care and weight management in pregnancy with women who have been weighed during pregnancy. a qualitative study utilising semi-structured telephone interviews, and thematic analysis. participants resided in Dublin, Ireland and had been weighed during pregnancy. individual telephone interviews conducted with ten postpartum women (nine months postpartum). experiences of routine weighing were positive, and participants believed it should be part of standard antenatal care. Several benefits to routine weighing were cited, including providing reassurance and minimising postpartum weight retention. It was felt that there was a lack of information provided on gestational weight gain and healthy lifestyle in pregnancy, and that healthcare professionals are ideally placed to provide this advice. Increased information provision was seen as a method to improve healthy lifestyle behaviours in pregnancy. these findings contribute to the current debate about the re-introduction of routine weighing throughout pregnancy (Allen-Walker et al., 2016). Women stated that they expected to be weighed during pregnancy and, contrary to previous claims, there was no evidence that routine weighing during antenatal care caused anxiety. From discussions it was clear that women desired more information on gestational weight gain and a healthy lifestyle, and felt that health professionals should provide this. Copyright © 2017 Elsevier Ltd. All rights reserved.

Design and validation of a low cost, high-capacity weighing device for wheelchair users and bariatrics.

PubMed

Sherrod, Brandon A; Dew, Dustin A; Rogers, Rebecca; Rimmer, James H; Eberhardt, Alan W

2017-01-01

Accessible high-capacity weighing scales are scarce in healthcare facilities, in part due to high device cost and weight. This shortage impairs weight monitoring and health maintenance for people with disabilities and/or morbid obesity. We conducted this study to design and validate a lighter, lower cost, high-capacity accessible weighing device. A prototype featuring 360 kg (800 lbs) of weight capacity, a wheelchair-accessible ramp, and wireless data transmission was fabricated. Forty-five participants (20 standing, 20 manual wheelchair users, and five power wheelchair users) were weighed using the prototype and a calibrated scale. Participants were surveyed to assess perception of each weighing device and the weighing procedure. Weight measurements between devices demonstrated a strong linear correlation (R 2  = 0.997) with absolute differences of 1.4 ± 2.0% (mean±SD). Participant preference ratings showed no difference between devices. The prototype weighed 11 kg (38%) less than the next lightest high-capacity commercial device found by author survey. The prototype's estimated commercial price range, $500-$600, is approximately half the price of the least expensive commercial device found by author survey. Such low cost weighing devices may improve access to weighing instrumentation, which may in turn help eliminate current health disparities. Future work is needed to determine the feasibility of market transition.

13. WEIGHING ROOM Fish were lifted up from tower by ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. WEIGHING ROOM Fish were lifted up from tower by conveyor, controlled by buttons above the two sets of vertical electrical conduits. They entered the weighing room through the shielded window on the left (shielding missing from the window on the right), were weighed and then transported to the holding tanks. - Hovden Cannery, 886 Cannery Row, Monterey, Monterey County, CA

9 CFR 201.49 - Requirements regarding scale tickets evidencing weighing of livestock, live poultry, and feed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... required by State law, the signature of the weigher, except for an automated weighing system where a..., that when live poultry is weighed on a scale other than a vehicle scale, the scale ticket or other... when using a vehicle scale to weigh feed for more than one producer or grower on the same multi...

Bioelectric impedance and hydrostatic weighing with and without head submersion in persons who are morbidly obese.

PubMed

Heath, E M; Adams, T D; Daines, M M; Hunt, S C

1998-08-01

To compare hydrostatic weighing with and without head submersion and bioelectric impedance analysis (BIA) for measurement of body composition of persons who are morbidly obese. Body composition was determined using 3 methods: hydrostatic weighing with and without head submersion and BIA. Residual volume for the hydrostatic weighing calculation was determined by body plethysmography. Subjects were 16 morbidly obese men (142.5 kg mean body weight) and 30 morbidly obese women (125.9 kg mean body weight) living in the Salt Lake County, Utah, area. Morbid obesity was defined as 40 kg or more over ideal weight. One-way, repeated-measures analysis of variance was followed by Scheffé post hoc tests; body-fat measurement method served as the repeated variable and percentage of body fat as the dependent variable. Men and women were analyzed separately. In addition, degree of agreement between the 3 methods of determining body composition was determined. A regression equation was used to calculate body density for hydrostatic weighing without head submersion. Two new BIA regression equations were developed from the data of the 16 men and 30 women. Values for percentage body fat from hydrostatic weighing with and without head submersion (41.8% vs 41.7%, respectively) were the same for men but differed for women (52.2% vs 49.4%, respectively, P < .0001). Values for body fat percentage measured by BIA were significantly lower for men (36.1%) and women (43.1%) (for both, P < .0001) compared with values from hydrostatic weighing methods. BIA underpredicted percentage body fat by a mean of 5.7% in men and 9.1% in women compared with the traditional hydrostatic weighing method. BIA tended to underpredict the measurement of percentage body fat in male and female subjects who were morbidly obese. Hydrostatic weighing without head submersion provides an accurate, acceptable, and convenient alternative method for body composition assessment of the morbidly obese population in comparison with the traditional hydrostatic weighing method. In population screening or other settings where underwater weighing is impractical, population-specific BIA regression equations should be used because general BIA equations lead to consistent underprediction of percentage body fat compared with hydrostatic weighing.

Baxter elastomeric pumps: Weighing as an alternative to visual inspection.

PubMed

Cusano, Ellen L; Ali, Raafi; Sawyer, Michael B; Chambers, Carole R; Tang, Patricia A

2018-04-01

Purpose Elastomeric pumps are used to administer 46-hour infusions of 5-fluorouracil (5FU). Baxter suggests patients visually monitor their pumps to ensure that infusions are proceeding correctly. This can be confusing and lead to concerns about under- or over-dosing. Baxter has not considered weighing pumps as a validated method for monitoring. This study aims to validate weighing as a more accurate method for patients and healthcare professionals, and describe real life Baxter Infusor™ variability. Methods Patients who had been started on a 46-hour 5FU infusion returned to the clinic approximately 24 h after starting treatment. The pump was weighed on a StarFrit kitchen scale, and date, time, and weights recorded. Patients were asked if they had a preference for weighing or visually inspecting their pump. Results Pumps ( n = 103) were weighed between 17.25 and 27.5 h after connection. The average weight of a pump was 189 g. Of 103 pumps weighed, 99 weighed less than expected, corresponding to average flow rates of 5.69 mL/h over the elapsed time. The expected flow rate is 5 mL/h with 10% variability. Average flow rates within the 17.25- to 27.5-hour window were 4.561 mL/h, which is 8.78% slower than expected, but within the 10% known variability. Forty-seven percent of patients didn't have a preference for either method, but for those who did have a preference, more than twice as many preferred weighing. Conclusion With proper education, weighing Baxter Infusors at home with kitchen scales can be an accepted and objective alternative to the current recommendation of visual inspection.

Credit PSR. This view of the interior of the weighing ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Credit PSR. This view of the interior of the weighing facility looks through the open double doors on the south side. A Toledo scale, rated at 3,000 pounds (1,363 Kg), is installed in the center of the floor; the smaller scale in the corner is rated for 200 pounds (91 Kg). The wall-mounted recording device records quantities weighed and serves as a record displaying that substances were in fact weighed. Note the explosion-proof fluorescent lighting above, and the 0.5 ton hoist - Jet Propulsion Laboratory Edwards Facility, Oxidizer Weigh & Storage Building, Edwards Air Force Base, Boron, Kern County, CA

Concept of operations for virtual weigh station

DOT National Transportation Integrated Search

2009-06-01

This document describes the concept of operations (ConOps) for the virtual weigh station (VWS). The ConOps describes the goals, functions, key concepts, architecture, operational scenarios, operational policies, and impacts of virtual weigh stations....

Summary of key benefits 1989-2015

DOT National Transportation Integrated Search

2017-01-01

The LTPP program relies on data collected by weigh-in-motion systems that measure the traffic stream The LTPP program receives and analyzes data from weigh-in-motion systems that measure traffic streams. For example, weigh-in-motion measurements coll...

An automated walk-over weighing system as a tool for measuring liveweight change in lactating dairy cows.

PubMed

Dickinson, R A; Morton, J M; Beggs, D S; Anderson, G A; Pyman, M F; Mansell, P D; Blackwood, C B

2013-07-01

Automated walk-over weighing systems can be used to monitor liveweights of cattle. Minimal literature exists to describe agreement between automated and static scales, and no known studies describe repeatability when used for daily measurements of dairy cows. This study establishes the repeatability of an automated walk-over cattle-weighing system, and agreement with static electronic scales, when used in a commercial dairy herd to weigh lactating cows. Forty-six lactating dairy cows from a seasonal calving, pasture-based dairy herd in southwest Victoria, Australia, were weighed once using a set of static scales and repeatedly using an automated walk-over weighing system at the exit of a rotary dairy. Substantial agreement was observed between the automated and static scales when assessed using Lin's concordance correlation coefficient. Weights measured by the automated walkover scales were within 5% of those measured by the static scales in 96% of weighings. Bland and Altman's 95% limits of agreement were -23.3 to 43.6 kg, a range of 66.9 kg. The 95% repeatability coefficient for automated weighings was 46.3 kg. Removal of a single outlier from the data set increased Lin's concordance coefficient, narrowed Bland and Altman's 95% limits of agreement to a range of 32.5 kg, and reduced the 95% repeatability coefficient to 18.7 kg. Cow misbehavior during walk-over weighing accounted for many of the larger weight discrepancies. The automated walk-over weighing system showed substantial agreement with the static scales when assessed using Lin's concordance correlation coefficient. This contrasted with limited agreement when assessed using Bland and Altman's method, largely due to poor repeatability. This suggests the automated weighing system is inadequate for detecting small liveweight differences in individual cows based on comparisons of single weights. Misbehaviors and other factors can result in the recording of spurious values on walk-over scales. Excluding outlier weights and comparing means of 7 consecutive daily weights may improve agreement sufficiently to allow meaningful assessment of small short-term changes in automated weights in individuals and groups of cows. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Regain in Body Mass After Weigh-In is Linked to Success in Real Life Judo Competition.

PubMed

Reale, Reid; Cox, Gregory R; Slater, Gary; Burke, Louise M

2016-12-01

We examined the relationship between the regain of body mass (BM) after weigh-in and success in real-life judo competition. Eighty-six (36 females, 50 males) senior judoka volunteered for this observational study of an international judo competition. Subjects were weighed at the official weigh-in and one hour before their first competition fight (15-20 hr later). Regain in BM after weigh-in was compared between medal winners and nonmedalists, winners and losers of each fight, males and females and across weight divisions. Heavyweights were excluded from analysis. Prefight BM was greater than BM at official weigh-in for both males and females, with % BM gains of 2.3 ± 2.0 (p ≤ .0001; ES= 1.59; CI95% [1.63, 2.98]) and 3.1 ± 2.2 (p ≤ .0001; ES = 2.03; CI95% [2.30, 3.89]), respectively. No significant differences were found between weight divisions for post weigh-in BM regain. Differences in post weigh-in BM regain were significantly higher in medal winners than nonmedalists for males and females combined (1.4 ± 0.4% BM; p = .0026; ES= 0.69; CI95% [0.05, 2.34]) and for males alone (1.5 ± 0.6% BM; p = .017; ES= 0.74; CI95% [0.02, 2.64]), but not for females (1.2 ± 0.7% BM; p = .096; ES = 0.58; CI95% [-0.02, 2.31]). Differences in BM regain after weigh-in between winners and losers were significant across all fights (0.9 ± 0.3% BM; p = .0021; ES= 0.43; CI95% [0.31, 1.41]) but not for first round fights (0.8 ± 0.5% BM; p = .1386, ES = 0.38; CI95% [-0.26, 1.86]). Winners showed a greater regain in BM post weigh-in than losers. This may reflect the greater magnitude of the BM loss needed to achieve weigh-in targets which also relates to the experience level of successful athletes.

7 CFR 29.69 - Weighing apparatus.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Weighing apparatus. 29.69 Section 29.69 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Regulations Permissive Inspection § 29.69 Weighing apparatus. A scale used for determination of...

7 CFR 29.69 - Weighing apparatus.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Weighing apparatus. 29.69 Section 29.69 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Regulations Permissive Inspection § 29.69 Weighing apparatus. A scale used for determination of...

Comparison between two methods of hydrostatic weighing without head submersion in morbidly obese females.

PubMed

Israel, R G; Evans, P; Pories, W J; O'Brien, K F; Donnelly, J E

1990-01-01

This study compared two methods of hydrostatic weighing without head submersion to conventional hydrostatic weighting in morbidly obese females. We concluded that hydrostatic weighing without head submersion is a valid alternative to conventional hydrostatic weighing especially when subjects are apprehensive in the water. The use of anthropometric head measures (HWNS-A) did not significantly improve the accuracy of the body composition assessment; therefore, elimination of these time consuming measurements in favor of the direct correction of head above Db is recommended.

Weight Regain: No Link to Success in a Real-Life Multiday Boxing Tournament.

PubMed

Reale, Reid; Cox, Gregory R; Slater, Gary; Burke, Louise M

2017-08-01

Combat-sport athletes acutely reduce body mass (BM) before weigh-in in an attempt to gain a size/strength advantage over smaller opponents. Few studies have investigated these practices among boxers and none have explored the impact of this practice on competitive success. One hundred (30 women, 70 men) elite boxers participating in the Australian national championships were weighed at the official weigh-in and 1 h before each competition bout. Regain in BM after weigh-in was compared between finalists and nonfinalists, winners and losers of each fight, men and women, and weight divisions. Boxers were surveyed on their pre- and post-weigh-in nutrition practices. The lightest men's weight category displayed significantly greater relative BM regain than all other divisions, with no difference between other divisions. BM prebout was higher than official weigh-in for men (2.12% ± 1.62%; P < .001; ES = 0.13) and women (1.49% ± 1.65%; P < .001; ES = 0.11). No differences in BM regain were found between finalists and nonfinalists, winners and losers of individual bouts, or between preliminary or final bouts. BM regain was significantly greater (0.37% BM, P < .001; ES = 0.25) before an afternoon bout compared with a morning bout. Boxers engage in acute BM-loss practices before the official competition weigh-in, but this does not appear to affect competition outcomes, at least when weight regain between weigh-in and fighting is used as a proxy for the magnitude of acute loss. While boxers recognize the importance of recovering after weigh-in, current practice is not aligned with best-practice guidance.

Weigh stations' capacity enhancement alternatives : a comparison of mainline electronic screening and physical expansion

DOT National Transportation Integrated Search

1998-08-19

A number of weigh stations are unable to keep pace with current truck traffic levels. In response, state enforcement agencies are compelled to seek capacity enhancements for the weigh stations. One response is to increase physical capacity by adding ...

7 CFR 800.98 - Weighing grain in combined lots.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Weighing grain in combined lots. 800.98 Section 800.98 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS Weighing...

40 CFR 98.84 - Monitoring and QA/QC requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... by direct weight measurement using the same plant instruments used for accounting purposes, such as... be determined quarterly by direct weight measurement using the same plant instruments used for accounting purposes, such as weigh hoppers, truck weigh scales, or belt weigh feeders. (f) The quantity of...

7 CFR 27.10 - Supervision of cotton inspection, weighing, sampling; and other duties.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Supervision of cotton inspection, weighing, sampling... COMMODITY STANDARDS AND STANDARD CONTAINER REGULATIONS COTTON CLASSIFICATION UNDER COTTON FUTURES LEGISLATION Regulations Administration § 27.10 Supervision of cotton inspection, weighing, sampling; and other...

7 CFR 27.10 - Supervision of cotton inspection, weighing, sampling; and other duties.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Supervision of cotton inspection, weighing, sampling... COMMODITY STANDARDS AND STANDARD CONTAINER REGULATIONS COTTON CLASSIFICATION UNDER COTTON FUTURES LEGISLATION Regulations Administration § 27.10 Supervision of cotton inspection, weighing, sampling; and other...

7 CFR 27.10 - Supervision of cotton inspection, weighing, sampling; and other duties.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Supervision of cotton inspection, weighing, sampling... COMMODITY STANDARDS AND STANDARD CONTAINER REGULATIONS COTTON CLASSIFICATION UNDER COTTON FUTURES LEGISLATION Regulations Administration § 27.10 Supervision of cotton inspection, weighing, sampling; and other...

7 CFR 27.10 - Supervision of cotton inspection, weighing, sampling; and other duties.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Supervision of cotton inspection, weighing, sampling... COMMODITY STANDARDS AND STANDARD CONTAINER REGULATIONS COTTON CLASSIFICATION UNDER COTTON FUTURES LEGISLATION Regulations Administration § 27.10 Supervision of cotton inspection, weighing, sampling; and other...

7 CFR 27.10 - Supervision of cotton inspection, weighing, sampling; and other duties.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Supervision of cotton inspection, weighing, sampling... COMMODITY STANDARDS AND STANDARD CONTAINER REGULATIONS COTTON CLASSIFICATION UNDER COTTON FUTURES LEGISLATION Regulations Administration § 27.10 Supervision of cotton inspection, weighing, sampling; and other...

Weigh-in-motion for planning applications in Louisiana : final report.

DOT National Transportation Integrated Search

1988-04-01

Weigh-In-Motion (WIM) is a method of weighing vehicles at highway speeds with the use of scales on or flush with the road surface. It has been used experimentally in Louisiana since 1976, but until recently little was done to prove its accuracy and u...

78 FR 51658 - Weighing, Feed, and Swine Contractors

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-21

... RIN 0580-AA99 Weighing, Feed, and Swine Contractors AGENCY: Grain Inspection, Packers and Stockyards... and swine contractors to poultry and swine production contract growers are based on accurate weighing... reweighing to add swine contractors to the list of firms that must comply, and adding feed to the list of...

Evidence Based Weighing Policy during the First Week to Prevent Neonatal Hypernatremic Dehydration while Breastfeeding.

PubMed

Boer, Suzanne; Unal, Sevim; van Wouwe, Jacobus P; van Dommelen, Paula

2016-01-01

Neonatal hypernatremic dehydration is prevented by daily neonatal weight monitoring. We aim to provide evidence-based support of this universally promoted weighing policy and to establish the most crucial days of weighing. Weight measurements of 2,359 healthy newborns and of 271 newborns with clinical hypernatremic dehydration were used within the first seven days of life to simulate various weighting policies to prevent hypernatremic dehydration; its sensitivity, specificity and positive predictive value (PPV) of these policies were calculated. Various referral criteria were also evaluated. A policy of daily weighing with a cut-off value of -2.5 Standard Deviation Score (SDS) on the growth chart for weight loss, had a 97.6% sensitivity, 97.6% specificity and a PPV of 2.80%. Weighing at birth and only at days two, four and seven with the same -2.5 SDS cut-off, resulted in 97.3% sensitivity, 98.5% specificity and a PPV of 4.43%. A weighing policy with measurements restricted to birth and day two, four and seven applying the -2.5 SDS cut-off seems an optimal policy to detect hypernatremic dehydration. Therefore we recommend to preferably weigh newborns at least on day two (i.e. ~48h), four and seven, and refer them to clinical pediatric care if their weight loss increases below -2.5 SDS. We also suggest lactation support for the mother, full clinical assessment of the infant and weighing again the following day in all newborns reaching a weight loss below -2.0 SDS.

Automating mouse weighing in group homecages with Raspberry Pi micro-computers.

PubMed

Noorshams, Omid; Boyd, Jamie D; Murphy, Timothy H

2017-06-15

Operant training systems make use of water or food restriction and make it necessary to weigh animals to ensure compliance with experimental endpoints. In other applications periodic weighing is necessary to assess drug side-effects, or as an endpoint in feeding experiments. Periodic weighing while essential can disrupt animal circadian rhythms and social structure. Automatic weighing system within paired mouse homecages. Up to 10 mice freely move between two cages (28×18×9cm) which were connected by a weighing chamber mounted on a load cell. Each mouse was identified using an RFID tag placed under the skin of the neck. A single-board computer (Raspberry Pi; RPi) controls the task, logging RFID tag, load cell weights, and time stamps from each RFID detection until the animal leaves the chamber. Collected data were statistically analyzed to estimate mouse weights. We anticipate integration with tasks where automated imaging or behaviour is assessed in homecages. Mice frequently move between the two cages, an average of 42+-16 times/day/mouse at which time we obtained weights. We report accurate determination of mouse weight and long term monitoring over 53days. Comparison with existing methods Although commercial systems are available for automatically weighing rodents, they only work with single animals, or are not open source nor cost effective for specific custom application. This automated system permits automated weighing of mice ∼40 times per day. The system employs inexpensive hardware and open-source Python code. Copyright © 2017 Elsevier B.V. All rights reserved.

The efficacy of a daily self-weighing weight loss intervention using smart scales and email

PubMed Central

Steinberg, Dori M.; Tate, Deborah F.; Bennett, Gary G.; Ennett, Susan; Samuel-Hodge, Carmen; Ward, Dianne S.

2013-01-01

Objective To examine the impact of a weight loss intervention that focused on daily self-weighing for self-monitoring as compared to a delayed control group among 91 overweight adults. Design and Methods The 6-month intervention included a cellular-connected “smart” scale for daily weighing, web-based weight loss graph, and weekly emails with tailored feedback and lessons. An objective measure of self-weighing frequency was obtained. Weight was measured in clinic at 3 and 6 months. Caloric intake and expenditure, and perceptions of daily self-weighing were also measured. Results Using intent-to-treat analyses, the intervention group lost significantly more weight compared to the control group [Mean (95%CI); 3 months: −4.41%(−5.5, −3.3) vs. −0.37%(−1.5, .76); 6 months: −6.55%(−7.7, −5.4) vs. −0.35%(−1.5, .79); group×time interaction: p<.001] and a greater percentage achieved 5% (42.6% vs. 6.8%; p<.0001) and 10% (27.7% vs. 0%; p<.0001) weight loss. On average, the intervention group self-weighed more days/week (6.1±1.1 vs. 1.1±1.5; p<.0001) and consumed fewer calories/day compared to the control group [Mean (95% CI); 6 months: 1509 (1291,1728) vs. 1856 (1637,2074); group×time interaction: p=.006]. Among intervention participants, daily self-weighing was perceived positively. Conclusions These results indicate that an intervention focusing on daily self-weighing can produce clinically significant weight loss. PMID:23512320

Mechanism isolates load weighing cell during lifting of load

NASA Technical Reports Server (NTRS)

Haigler, J. S.

1966-01-01

Load weighing cell used in conjuction with a hoist is isolated during lifting and manipulation of the load. A simple mechanism, attached to a crane hook, provides a screw adjustment for engaging the load cell during weighing of the load and isolating it from lift forces during hoisting of the load.

40 CFR 92.128 - Particulate handling and weighing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Particulate handling and weighing. (a) At least 1 hour before the test, place each filter in a closed (to... stabilization period, weigh each filter on the microbalance. This reading is the tare weight and must be recorded. (c) The filter shall then be stored in a covered petri dish or a sealed filter holder until...

40 CFR 92.128 - Particulate handling and weighing.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Particulate handling and weighing. (a) At least 1 hour before the test, place each filter in a closed (to... stabilization period, weigh each filter on the microbalance. This reading is the tare weight and must be recorded. (c) The filter shall then be stored in a covered petri dish or a sealed filter holder until...

40 CFR 92.128 - Particulate handling and weighing.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Particulate handling and weighing. (a) At least 1 hour before the test, place each filter in a closed (to... stabilization period, weigh each filter on the microbalance. This reading is the tare weight and must be recorded. (c) The filter shall then be stored in a covered petri dish or a sealed filter holder until...

40 CFR 92.128 - Particulate handling and weighing.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Particulate handling and weighing. (a) At least 1 hour before the test, place each filter in a closed (to... stabilization period, weigh each filter on the microbalance. This reading is the tare weight and must be recorded. (c) The filter shall then be stored in a covered petri dish or a sealed filter holder until...

40 CFR 92.128 - Particulate handling and weighing.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Particulate handling and weighing. (a) At least 1 hour before the test, place each filter in a closed (to... stabilization period, weigh each filter on the microbalance. This reading is the tare weight and must be recorded. (c) The filter shall then be stored in a covered petri dish or a sealed filter holder until...

21 CFR 136.110 - Bread, rolls, and buns.

Code of Federal Regulations, 2013 CFR

2013-04-01

... foods produced by baking mixed yeast-leavened dough prepared from one or more of the farinaceous... the baked unit weighs 454 grams (1 pound) or more, one entire unit is used for the determination; if the baked unit weighs less than 454 grams, enough units to weigh 454 grams or more are used. Copies of...

21 CFR 136.110 - Bread, rolls, and buns.

Code of Federal Regulations, 2012 CFR

2012-04-01

... foods produced by baking mixed yeast-leavened dough prepared from one or more of the farinaceous... the baked unit weighs 454 grams (1 pound) or more, one entire unit is used for the determination; if the baked unit weighs less than 454 grams, enough units to weigh 454 grams or more are used. Copies of...

21 CFR 136.110 - Bread, rolls, and buns.

Code of Federal Regulations, 2010 CFR

2010-04-01

... foods produced by baking mixed yeast-leavened dough prepared from one or more of the farinaceous... the baked unit weighs 454 grams (1 pound) or more, one entire unit is used for the determination; if the baked unit weighs less than 454 grams, enough units to weigh 454 grams or more are used. Copies of...

21 CFR 136.110 - Bread, rolls, and buns.

Code of Federal Regulations, 2014 CFR

2014-04-01

... foods produced by baking mixed yeast-leavened dough prepared from one or more of the farinaceous... the baked unit weighs 454 grams (1 pound) or more, one entire unit is used for the determination; if the baked unit weighs less than 454 grams, enough units to weigh 454 grams or more are used. Copies of...

21 CFR 136.110 - Bread, rolls, and buns.

Code of Federal Regulations, 2011 CFR

2011-04-01

... foods produced by baking mixed yeast-leavened dough prepared from one or more of the farinaceous... the baked unit weighs 454 grams (1 pound) or more, one entire unit is used for the determination; if the baked unit weighs less than 454 grams, enough units to weigh 454 grams or more are used. Copies of...

49 CFR 1037.1 - Weights and weighing.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) Destination weights—Where the consignee weighs a shipment of grain or grain products and a claim for loss and... in combination with a supervised weight establishes prima facie that the loss occurred in transit and... 49 Transportation 8 2010-10-01 2010-10-01 false Weights and weighing. 1037.1 Section 1037.1...

49 CFR 1037.1 - Weights and weighing.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Destination weights—Where the consignee weighs a shipment of grain or grain products and a claim for loss and... in combination with a supervised weight establishes prima facie that the loss occurred in transit and... 49 Transportation 8 2011-10-01 2011-10-01 false Weights and weighing. 1037.1 Section 1037.1...

7 CFR 800.18 - Waivers of the official inspection and Class X weighing requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 7 2013-01-01 2013-01-01 false Waivers of the official inspection and Class X weighing requirements. 800.18 Section 800.18 Agriculture Regulations of the Department of Agriculture...), DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS Official Inspection and Class X Or Class Y Weighing...

7 CFR 800.18 - Waivers of the official inspection and Class X weighing requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 7 2014-01-01 2014-01-01 false Waivers of the official inspection and Class X weighing requirements. 800.18 Section 800.18 Agriculture Regulations of the Department of Agriculture...), DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS Official Inspection and Class X Or Class Y Weighing...

7 CFR 800.18 - Waivers of the official inspection and Class X weighing requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 7 2012-01-01 2012-01-01 false Waivers of the official inspection and Class X weighing requirements. 800.18 Section 800.18 Agriculture Regulations of the Department of Agriculture...), DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS Official Inspection and Class X Or Class Y Weighing...

7 CFR 800.18 - Waivers of the official inspection and Class X weighing requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 7 2011-01-01 2011-01-01 false Waivers of the official inspection and Class X weighing requirements. 800.18 Section 800.18 Agriculture Regulations of the Department of Agriculture...), DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS Official Inspection and Class X Or Class Y Weighing...

7 CFR 800.18 - Waivers of the official inspection and Class X weighing requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Waivers of the official inspection and Class X weighing requirements. 800.18 Section 800.18 Agriculture Regulations of the Department of Agriculture...), DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS Official Inspection and Class X Or Class Y Weighing...

The Effect of Flexible Pavement Mechanics on the Accuracy of Axle Load Sensors in Vehicle Weigh-in-Motion Systems

PubMed Central

Rys, Dawid

2017-01-01

Weigh-in-Motion systems are tools to prevent road pavements from the adverse phenomena of vehicle overloading. However, the effectiveness of these systems can be significantly increased by improving weighing accuracy, which is now insufficient for direct enforcement of overloaded vehicles. Field tests show that the accuracy of Weigh-in-Motion axle load sensors installed in the flexible (asphalt) pavements depends on pavement temperature and vehicle speeds. Although this is a known phenomenon, it has not been explained yet. The aim of our study is to fill this gap in the knowledge. The explanation of this phenomena which is presented in the paper is based on pavement/sensors mechanics and the application of the multilayer elastic half-space theory. We show that differences in the distribution of vertical and horizontal stresses in the pavement structure are the cause of vehicle weight measurement errors. These studies are important in terms of Weigh-in-Motion systems for direct enforcement and will help to improve the weighing results accuracy. PMID:28880215

The Effect of Flexible Pavement Mechanics on the Accuracy of Axle Load Sensors in Vehicle Weigh-in-Motion Systems.

PubMed

Burnos, Piotr; Rys, Dawid

2017-09-07

Weigh-in-Motion systems are tools to prevent road pavements from the adverse phenomena of vehicle overloading. However, the effectiveness of these systems can be significantly increased by improving weighing accuracy, which is now insufficient for direct enforcement of overloaded vehicles. Field tests show that the accuracy of Weigh-in-Motion axle load sensors installed in the flexible (asphalt) pavements depends on pavement temperature and vehicle speeds. Although this is a known phenomenon, it has not been explained yet. The aim of our study is to fill this gap in the knowledge. The explanation of this phenomena which is presented in the paper is based on pavement/sensors mechanics and the application of the multilayer elastic half-space theory. We show that differences in the distribution of vertical and horizontal stresses in the pavement structure are the cause of vehicle weight measurement errors. These studies are important in terms of Weigh-in-Motion systems for direct enforcement and will help to improve the weighing results accuracy.

Density Measurement System for Weights of 1 kg to 20 kg Using Hydrostatic Weighing

NASA Astrophysics Data System (ADS)

Lee, Yong Jae; Lee, Woo Gab; Abdurahman, Mohammed; Kim, Kwang Pyo

This paper presents a density measurement system to determine density of weights from 1 kg to 20 kg using hydrostatic weighing. The system works based on Archimedes principle. The density of reference liquid is determined using this setup while determining the density of the test weight. Density sphere is used as standard density ball to determine density of the reference liquid. A new immersion pan is designed for dual purpose to carry the density sphere and the cylindrical test weight for weighing in liquid. Main parts of the setup are an electronic balance, a thermostat controlled liquid bath, reference weights designed for bottom weighing, dual purpose immersion pans and stepping motors to load and unload in weighing process. The results of density measurement will be evaluated as uncertainties for weights of 1 kg to 20 kg.

A hydrostatic weighing method using total lung capacity and a small tank.

PubMed Central

Warner, J G; Yeater, R; Sherwood, L; Weber, K

1986-01-01

The purpose of this study was to establish the validity and reliability of a hydrostatic weighing method using total lung capacity (measuring vital capacity with a respirometer at the time of weighing) the prone position, and a small oblong tank. The validity of the method was established by comparing the TLC prone (tank) method against three hydrostatic weighing methods administered in a pool. The three methods included residual volume seated, TLC seated and TLC prone. Eighty male and female subjects were underwater weighed using each of the four methods. Validity coefficients for per cent body fat between the TLC prone (tank) method and the RV seated (pool), TLC seated (pool) and TLC prone (pool) methods were .98, .99 and .99, respectively. A randomised complete block ANOVA found significant differences between the RV seated (pool) method and each of the three TLC methods with respect to both body density and per cent body fat. The differences were negligible with respect to HW error. Reliability of the TLC prone (tank) method was established by weighing twenty subjects three different times with ten-minute time intervals between testing. Multiple correlations yielded reliability coefficients for body density and per cent body fat values of .99 and .99, respectively. It was concluded that the TLC prone (tank) method is valid, reliable and a favourable method of hydrostatic weighing. PMID:3697596

A hydrostatic weighing method using total lung capacity and a small tank.

PubMed

Warner, J G; Yeater, R; Sherwood, L; Weber, K

1986-03-01

The purpose of this study was to establish the validity and reliability of a hydrostatic weighing method using total lung capacity (measuring vital capacity with a respirometer at the time of weighing) the prone position, and a small oblong tank. The validity of the method was established by comparing the TLC prone (tank) method against three hydrostatic weighing methods administered in a pool. The three methods included residual volume seated, TLC seated and TLC prone. Eighty male and female subjects were underwater weighed using each of the four methods. Validity coefficients for per cent body fat between the TLC prone (tank) method and the RV seated (pool), TLC seated (pool) and TLC prone (pool) methods were .98, .99 and .99, respectively. A randomised complete block ANOVA found significant differences between the RV seated (pool) method and each of the three TLC methods with respect to both body density and per cent body fat. The differences were negligible with respect to HW error. Reliability of the TLC prone (tank) method was established by weighing twenty subjects three different times with ten-minute time intervals between testing. Multiple correlations yielded reliability coefficients for body density and per cent body fat values of .99 and .99, respectively. It was concluded that the TLC prone (tank) method is valid, reliable and a favourable method of hydrostatic weighing.

21 CFR 864.9195 - Blood mixing devices and blood weighing devices.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Blood mixing devices and blood weighing devices... Manufacture Blood and Blood Products § 864.9195 Blood mixing devices and blood weighing devices. (a) Identification. A blood mixing device is a device intended for medical purposes that is used to mix blood or...

21 CFR 864.9195 - Blood mixing devices and blood weighing devices.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Blood mixing devices and blood weighing devices... Manufacture Blood and Blood Products § 864.9195 Blood mixing devices and blood weighing devices. (a) Identification. A blood mixing device is a device intended for medical purposes that is used to mix blood or...

21 CFR 864.9195 - Blood mixing devices and blood weighing devices.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Blood mixing devices and blood weighing devices... Manufacture Blood and Blood Products § 864.9195 Blood mixing devices and blood weighing devices. (a) Identification. A blood mixing device is a device intended for medical purposes that is used to mix blood or...

21 CFR 864.9195 - Blood mixing devices and blood weighing devices.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Blood mixing devices and blood weighing devices... Manufacture Blood and Blood Products § 864.9195 Blood mixing devices and blood weighing devices. (a) Identification. A blood mixing device is a device intended for medical purposes that is used to mix blood or...

21 CFR 864.9195 - Blood mixing devices and blood weighing devices.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Blood mixing devices and blood weighing devices... Manufacture Blood and Blood Products § 864.9195 Blood mixing devices and blood weighing devices. (a) Identification. A blood mixing device is a device intended for medical purposes that is used to mix blood or...

40 CFR 86.1312-88 - Weighing chamber and microgram balance specifications.

Code of Federal Regulations, 2012 CFR

2012-07-01

... conditions—(1) Temperature. The ambient temperature of the chamber (or room) in which the particulate filters are conditioned and weighed shall be maintained at 295 K ±3 K (22 °C ±3 °C) during all filter conditioning and weighing. (2) Humidity. The humidity of the chamber (or room) in which the particulate filters...

40 CFR 86.1312-88 - Weighing chamber and microgram balance specifications.

Code of Federal Regulations, 2010 CFR

2010-07-01

... conditions—(1) Temperature. The ambient temperature of the chamber (or room) in which the particulate filters are conditioned and weighed shall be maintained at 295 K ±3 K (22 °C ±3 °C) during all filter conditioning and weighing. (2) Humidity. The humidity of the chamber (or room) in which the particulate filters...

40 CFR 86.1312-88 - Weighing chamber and microgram balance specifications.

Code of Federal Regulations, 2013 CFR

2013-07-01

... conditions—(1) Temperature. The ambient temperature of the chamber (or room) in which the particulate filters are conditioned and weighed shall be maintained at 295 K ±3 K (22 °C ±3 °C) during all filter conditioning and weighing. (2) Humidity. The humidity of the chamber (or room) in which the particulate filters...

40 CFR 86.1312-88 - Weighing chamber and microgram balance specifications.

Code of Federal Regulations, 2011 CFR

2011-07-01

... conditions—(1) Temperature. The ambient temperature of the chamber (or room) in which the particulate filters are conditioned and weighed shall be maintained at 295 K ±3 K (22 °C ±3 °C) during all filter conditioning and weighing. (2) Humidity. The humidity of the chamber (or room) in which the particulate filters...

7 CFR 800.96 - Weighing procedures.

Code of Federal Regulations, 2011 CFR

2011-01-01

.... When loss of identity occurs, no amount shall be shown in the “Net Weight” portion of the weight... after weighing or a portion of grain or other material is added to the lot after weighing. When loss of identity occurs, no amount shall be shown in the “Net Weight” portion of the weight certificate for the lot...

NHEXAS PHASE I REGION 5 STUDY--STANDARD OPERATING PROCEDURE--NHEXAS FILTER HANDLING, WEIGHING AND ARCHIVING PROCEDURES FOR AEROSOL SAMPLES (RTI/ACS-AP-209-011)

EPA Science Inventory

This protocol describes the procedures for weighing, handling, and archiving aerosol filters and for managing the associated analytical and quality assurance data. Filter samples were weighed for aerosol mass at RTI laboratory, with only the automated field sampling data transfer...

78 FR 13014 - Designation of West Lafayette (IN) To Provide Class X or Class Y Weighing Services

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-26

... West Lafayette (IN) To Provide Class X or Class Y Weighing Services AGENCY: Grain Inspection, Packers... Titus Grain Inspection, Inc. (Titus) to provide Class X or Class Y weighing services under the United... currently assigned geographic area. Titus's present designation is amended to include Class X or Class Y...

Qualitative analysis of the role of self-weighing as a strategy of weight control for weight-loss maintainers in comparison with a normal, stable weight group.

PubMed

Carrard, Isabelle; Kruseman, Maaike

2016-10-01

Self-weighing seems to have a primary role in weight-loss maintenance. The use of this strategy may help correct even slight weight regain and contribute to long-term weight stability. However, self-weighing has also been associated with negative psychological health consequences in specific subgroups. This study aimed to explore the use and the behavioral and psychological consequences of self-weighing in a group of weight-loss maintainers (WLoMs). We chose a qualitative design to conduct this investigation. Eighteen WLoMs were interviewed and compared to a matched comparison group of 18 participants with a lifelong normal stable weight (NSW). Analyses showed that most WLoMs needed regular self-weighing to be aware of their weight. The weight displayed on the scale helped WLoMs sustain the continuous efforts needed to maintain weight loss and also at times triggered corrective actions that were sometimes drastic. Weight changes generated both negative and positive affect among WLoMs, who could experience anxiety because of self-weighing or have their self-esteem impaired in the case of weight gain. In comparison, the NSW group rarely used self-weighing. They relied on a conscious way of living to control their weight and needed fewer strategies. NSW participants simply went back to their routine when they felt a slight increase in their weight, without experiencing consequences on their mood or self-esteem. Regular self-weighing as a component of weight-loss maintenance should be encouraged to help WLoMs regulate their food and physical activity, provided that potential consequences on psychological well-being, including self-esteem, are screened and addressed when needed. Copyright © 2016 Elsevier Ltd. All rights reserved.

14 CFR 91.883 - Special flight authorizations for jet airplanes weighing 75,000 pounds or less.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 2 2014-01-01 2014-01-01 false Special flight authorizations for jet... OPERATING AND FLIGHT RULES Operating Noise Limits § 91.883 Special flight authorizations for jet airplanes weighing 75,000 pounds or less. (a) After December 31, 2015, an operator of a jet airplane weighing 75,000...

A Simple Model for Learning Improvement: Weigh Pig, Feed Pig, Weigh Pig. Occasional Paper #23

ERIC Educational Resources Information Center

Fulcher, Keston H.; Good, Megan R.; Coleman, Chris M.; Smith, Kristen L.

2014-01-01

Assessing learning does not by itself result in increased student accomplishment, much like a pig never fattened up because it was weighed. Indeed, recent research shows that while institutions are more regularly engaging in assessment, they have little to show in the way of stronger student performance. This paper clarifies how assessment results…

Research on the Influence of Weighing Accuracy Caused by the Position of Tension Wheel on the Electronic Belt-Conveyor Scale

NASA Astrophysics Data System (ADS)

Zhang, Kun; Zhang, Hu; Song, Qiuzhi

2018-01-01

In this paper, a Single- Idler electronic belt-conveyor scale is the Object of study. The contact force between the belt and the supporting roller is calculated by the finite element analysis software ABAQUS. The relationship between the tension distance of the tension wheel and the contact force between the belt and the weighing roller is obtained. The best stretching distance is found through analysis. And the conclusion which is the weighing error is different at the same stretching distance but the different weight of material is obtained. A compensation mechanism is proposed to improve the weighing accuracy.

Prenatal development of the agouti (Dasyprocta prymnolopha Wagler, 1831): External features and growth curves.

PubMed

Fortes, Eunice Anita de Moura; Ferraz, Maíra Soares; Bezerra, Dayseanny Oliveira; Júnior, Aírton Mendes Conde; Cabral, Rosa Maria; Sousa, Francisco das Chagas Araújo; Almeida, Hatawa Melo; Pessoa, Gerson Tavares; Menezes, Danilo José Ayres de; Guerra, Sérgio Paulo Lima; Sampaio, Ivan Barbosa Machado; Assis Neto, Antônio Chaves; Carvalho, Maria Acelina Martins de

2013-08-01

The gestation period in agoutis can range from 104 to 120 days. Knowledge regarding the morphological characteristics of embryos and fetuses is important as a base for studies in reproduction biotechnology, such as in vitro fertilization, embryo transfer and helps in determining congenital anomalies during the development phase. Thus, given the importance and lack of information about agouti embryology, the objective of this study was to characterize the external morphology and define the biometry of embryos and fetuses, at different days of development. Nine females were submitted to daily colpocytology to identify the estrus, confirm mating and identify day zero of the gestation. When the mating was confirmed they were weighed, underwent abdominal ultrasonography and surgery was conducted on the females at the gestational ages of 25, 30, 35, 40, 45, 50, 75 and 100 days. Sixteen embryos/fetuses were weighed and measured. Agouti embryos at 25 days after mating are "C" shaped, with primitive structures, 0.4±0.01cm crown-rump and weighed 0.06±0.01g; at 30 days after mating the crown-rump was 0.95±0.07cm and weighed 0.28±0.00g; at 35 days after mating the crown-rump was 155±0.07cm and weighed 0.38±0.01g; at 40 days after mating the crown-rump was 2.25±0.21cm and weighed 1.25±0.07g; at 45 days after mating the crown-rump was 3.45±0.35cm and weighed 2.75±0.64g; at 50 days after mating the crown-rump was 5.0±0.3cm and weighed 7.01±2.6g; at 75 days after mating, the skin was dark, the crown-rump was 10.0±0.14cm and weighed 55.2±0.07g. At 100 days after mating, the crown-rump was 13.8±0.49cm and fetuses weighed 136.7±9.40g. Based on the morphological data assessed the embryo and fetus age could be assessed and the size and average weight of agouti embryos was established. Copyright © 2013 Elsevier B.V. All rights reserved.

77 FR 38754 - Hazardous Substances and Articles; Administration and Enforcement Regulations: Notice of Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-29

... more than half of a group of: (A) White rats (each weighing between 200 and 300 grams) when a single... weighing between 200 and 300 grams) when a concentration of 200 parts per million by volume or less of gas... than half of a group of: (A) White rats (each weighing between 200 and 300 grams) when a single dose of...

40 CFR 86.112-91 - Weighing chamber (or room) and microgram balance specifications.

Code of Federal Regulations, 2014 CFR

2014-07-01

... temperature of the chamber in which the particulate filters are conditioned and weighed shall be maintained to within ±10 °F (6 °C) of a set point between 68 °F (20 °C) and 86 °F (30 °C) during all filter conditioning and filter weighing. A continuous recording of the temperature is required. (2) Humidity. The...

40 CFR 86.112-91 - Weighing chamber (or room) and microgram balance specifications.

Code of Federal Regulations, 2012 CFR

2012-07-01

... temperature of the chamber in which the particulate filters are conditioned and weighed shall be maintained to within ±10 °F (6 °C) of a set point between 68 °F (20 °C) and 86 °F (30 °C) during all filter conditioning and filter weighing. A continuous recording of the temperature is required. (2) Humidity. The...

40 CFR 86.112-91 - Weighing chamber (or room) and microgram balance specifications.

Code of Federal Regulations, 2010 CFR

2010-07-01

... temperature of the chamber in which the particulate filters are conditioned and weighed shall be maintained to within ±10 °F (6 °C) of a set point between 68 °F (20 °C) and 86 °F (30 °C) during all filter conditioning and filter weighing. A continuous recording of the temperature is required. (2) Humidity. The...

40 CFR 86.112-91 - Weighing chamber (or room) and microgram balance specifications.

Code of Federal Regulations, 2011 CFR

2011-07-01

... temperature of the chamber in which the particulate filters are conditioned and weighed shall be maintained to within ±10 °F (6 °C) of a set point between 68 °F (20 °C) and 86 °F (30 °C) during all filter conditioning and filter weighing. A continuous recording of the temperature is required. (2) Humidity. The...

40 CFR 86.112-91 - Weighing chamber (or room) and microgram balance specifications.

Code of Federal Regulations, 2013 CFR

2013-07-01

... temperature of the chamber in which the particulate filters are conditioned and weighed shall be maintained to within ±10 °F (6 °C) of a set point between 68 °F (20 °C) and 86 °F (30 °C) during all filter conditioning and filter weighing. A continuous recording of the temperature is required. (2) Humidity. The...

11. PUMP HOUSE AND WEIGHING ROOM Fish were pumped from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. PUMP HOUSE AND WEIGHING ROOM Fish were pumped from floating hoppers, to the pump house (on the far right). From there they were either lifted by conveyor belt to the weighing room (top center) and thence to the holding tanks, or were washed through sealers, weighed and then sluiced to holding tanks. The process used depended upon the type and size of fish. The square cement vat (center) was to be a settling tank from which fish oil, reclaimed from the reduction process, was to be pumped into the round metal tank (above the vat). This process however, was never fully utilized before the sardines ran out. - Hovden Cannery, 886 Cannery Row, Monterey, Monterey County, CA

Development of food photographs for use with children aged 18 months to 16 years: Comparison against weighed food diaries - The Young Person's Food Atlas (UK).

PubMed

Foster, Emma; Hawkins, Adrian; Barton, Karen L; Stamp, Elaine; Matthews, John N S; Adamson, Ashley J

2017-01-01

Traditional dietary assessment methods, used in the UK, such as weighed food diaries impose a large participant burden, often resulting in difficulty recruiting representative samples and underreporting of energy intakes. One approach to reducing the burden placed on the participant is to use portion size assessment tools to obtain an estimate of the amount of food consumed, removing the need to weigh all foods. An age range specific food atlas was developed for use in assessing children's dietary intakes. The foods selected and portion sizes depicted were derived from intakes recorded during the UK National Diet and Nutrition Surveys of children aged 1.5 to 16 years. Estimates of food portion sizes using the food atlas were compared against 4-day weighed intakes along with in-school / nursery observations, by the research team. Interviews were conducted with parents the day after completion of the diary, and for children aged 4 to 16 years, also with the child. Mean estimates of portion size consumed were within 7% of the weight of food recorded in the weighed food diary. The limits of agreement were wide indicating high variability of estimates at the individual level but the precision increased with increasing age. For children 11 years and over, agreement with weighed food diaries, was as good as that of their parents in terms of total weight of food consumed and of intake of energy and key nutrients. The age appropriate food photographs offer an alternative to weighed intakes for dietary assessment with children.

The Weighing Chair of Sanctorius Sanctorius: A Replica.

PubMed

Hollerbach, Teresa

2018-05-14

In 1614, the physician Sanctorius Sanctorius (1561-1636) published his most famous work entitled Ars […] de statica medicina (On static medicine). This is a work composed of aphorisms that present the practical results of a series of weighing procedures, rather than theoretical observations. De statica medicina is the result of a large number of test series that Sanctorius carried out over many years with the weighing chair he constructed himself in order to quantify the so-called perspiratio insensibilis, an insensible perspiration of the human body. Through his weighing experiments, Sanctorius introduced the idea of quantitative research into physiology. Although historical accounts ascribe an important role to Sanctorius as the founder of a new medical science, up until now the design of his weighing chair and the method of measurement have not been closely analysed. The aim of this paper is to close this gap. Through a collaboration between the Max Planck Institute for the History of Science and the Technical University of Berlin (Institute of Vocational Education and Work Studies), Sanctorius's weighing chair was reconstructed and experiments carried out with it. This opened new perspectives on Sanctorius's work and led to a reconsideration of the function and purpose of his weighing chair. With his static medicine, Sanctorius repurposed an old instrument. The replication of the weighing chair and the repetition of the experiments demonstrate that this novel application of scales posed some challenges for the mechanical design of the instrument. We recognized that the instrument fulfilled different functions that might in turn have affected its design, precision, and the measuring method applied. Although in the end we could not clarify how Sanctorius actually conducted his measurements, we were nevertheless able to develop an understanding of Sanctorius's mechanical and practical knowledge that would not have been possible for us to develop solely on the basis of the written sources.

Single-dose pharmacokinetic properties of esomeprazole in children aged 1 - 11 years with endoscopically proven GERD: a randomized, open-label study.

PubMed

Youssef, Nader N; Tron, Eduardo; Tolia, Vasundhara; Hamer-Maansson, Jennifer E; Lundborg, Per; Illueca, Marta

2014-11-01

To assess the overall exposure after a single dose of esomeprazole in children with gastroesophageal reflux disease (GERD). Oral esomeprazole administered as an intact capsule with 30 - 180 mL of water, or as an opened capsule mixed with as much as 1 tablespoon of applesauce followed by 30 - 180 mL of water. In this randomized, open-label study of children aged 1 - 11 years with endoscopically proven GERD, patients weighing 8 - < 20 kg were randomized to a single 5- or 10-mg oral dose of esomeprazole, and patients weighing >= 20 kg were randomized to a single 10- or 20-mg oral dose of esomeprazole. Esomeprazole exposure (AUC(0-∞)), AUC from zero to last measurable concentration (AUC(0-t)), maximum plasma concentration (C(max)), time to C(max) (t(max)), terminal-phase half-life, apparent oral clearance, and apparent volume of distribution were determined. 28 patients were randomized to receive esomeprazole: 14 patients weighing 8 to < 20 kg received esomeprazole 5 mg (n = 7) or 10 mg (n = 7), and 14 patients weighing ≥20 kg received esomeprazole 10 mg (n = 6) or 20 mg (n = 8). Children weighing 8 - < 20 kg had a 1.8-fold higher exposure with the 10-mg vs. 5-mg dose (AUC(0-∞), 1.32 vs. 0.73 μmol·h/L, respectively); children weighing ≥ 20 kg had a 4.4-fold higher exposure with the 20-mg vs. 10-mg dose (AUC(0-∞), 3.06 vs. 0.69 μmol·h/L). C(max) was 2.2-fold higher for the 10-mg vs. 5-mg dose (8 to < 20 kg) and 2.4-fold higher for the 20-mg vs.10-mg dose (>= 20 kg). The pharmacokinetics of single-dose esomeprazole were dose-dependent in children weighing >= 20 kg but not in children weighing 8 to < 20 kg.

In-pavement fiber Bragg grating sensors for high-speed weigh-in-motion measurements

NASA Astrophysics Data System (ADS)

Al-Tarawneh, Mu'ath; Huang, Ying

2017-04-01

The demand on high-speed weigh-in-motion (WIM) measurement rises significantly in last decade to collect weight information for traffic managements especially after the introduction of weigh-station bypass programs such as Pre-Pass. In this study, a three-dimension glass fiber-reinforced polymer packaged fiber Bragg grating sensor (3D GFRP-FBG) is introduced to be embedded inside flexible pavements for weigh-in-motion (WIM) measurement at high speed. Sensitivity study showed that the developed sensor is very sensitive to the passing weights at high speed. Field tests also validated that the developed sensor was able to detect weights at a vehicle driving speed up to 55mph, which can be applied for WIM measurements at high speed.

Laparoscopic cryptorchidectomy in standing bulls

PubMed Central

KANEKO, Yasuyuki; TORISU, Shidow; KITAHARA, Go; HIDAKA, Yuichi; SATOH, Hiroyuki; ASANUMA, Taketoshi; MIZUTANI, Shinya; OSAWA, Takeshi; NAGANOBU, Kiyokazu

2015-01-01

Laparoscopic cryptorchidectomy without insufflation was applied in 10 standing bulls aged 3 to 15 months. Nine bulls were preoperatively pointed out intra-abdominal testes by computed tomography. Preoperative fasting for a minimum of 24 hr provided laparoscopic visualization of intra-abdominal area from the kidney to the inguinal region. Surgical procedure was interrupted by intra-abdominal fat and testis size. It took 0.6 to 1.5 hr in 4 animals weighing 98 to 139 kg, 0.8 to 2.8 hr in 4 animals weighing 170 to 187 kg, and 3 and 4 hr in 2 animals weighing 244 and 300 kg to complete the cryptorchidectomy. In conclusion, standing gasless laparoscopic cryptorchidectomy seems to be most suitable for bulls weighing from 100 to 180 kg. PMID:25715955

Development of food photographs for use with children aged 18 months to 16 years: Comparison against weighed food diaries – The Young Person’s Food Atlas (UK)

PubMed Central

Hawkins, Adrian; Barton, Karen L.; Stamp, Elaine; Matthews, John N. S.; Adamson, Ashley J.

2017-01-01

Traditional dietary assessment methods, used in the UK, such as weighed food diaries impose a large participant burden, often resulting in difficulty recruiting representative samples and underreporting of energy intakes. One approach to reducing the burden placed on the participant is to use portion size assessment tools to obtain an estimate of the amount of food consumed, removing the need to weigh all foods. An age range specific food atlas was developed for use in assessing children’s dietary intakes. The foods selected and portion sizes depicted were derived from intakes recorded during the UK National Diet and Nutrition Surveys of children aged 1.5 to 16 years. Estimates of food portion sizes using the food atlas were compared against 4-day weighed intakes along with in-school / nursery observations, by the research team. Interviews were conducted with parents the day after completion of the diary, and for children aged 4 to 16 years, also with the child. Mean estimates of portion size consumed were within 7% of the weight of food recorded in the weighed food diary. The limits of agreement were wide indicating high variability of estimates at the individual level but the precision increased with increasing age. For children 11 years and over, agreement with weighed food diaries, was as good as that of their parents in terms of total weight of food consumed and of intake of energy and key nutrients. The age appropriate food photographs offer an alternative to weighed intakes for dietary assessment with children. PMID:28199319

Access to a scale and self-weighing habits among public housing residents.

PubMed

Bramante, C T; Clark, J M; Gudzune, K A

2018-05-31

Having access to a scale is essential for individuals to engage in self-weighing; however, few studies examine scale access, particularly among low-income individuals. Our objectives were to (i) determine how many public housing residents have access to a scale and (ii) describe their self-weighing habits. We conducted a cross-sectional survey of public housing residents in Baltimore, MD, from August 2014 to August 2015. Participants answered questions about their access to a scale ('yes'/'no') and daily self-weighing habits ('no scale/never or hardly ever' vs. 'some/about half/much of the time/always'). We used t-tests or chi-square tests to examine the association of scale access with respondent characteristics. Overall, 266 adults participated (48% response rate). Mean age was 45 years with 86% women, 95% black and 54% with obesity. Only 32% had access to a scale; however, 78% of those with this access reported engaging in some self-weighing. Residents who lacked access to a scale were younger (P = 0.03), and more likely to be unemployed/disabled (P = 0.01) or food insecure (P < 0.01). While few public housing residents have access to a scale, those who do report daily self-weighing with some regularity. Financial hardship may influence scale access in this population, as potential proxies of this status were associated with no scale access. © 2018 World Obesity Federation.

Regular self-weighing to promote weight maintenance after intentional weight loss: a quasi-randomized controlled trial.

PubMed

Madigan, Claire D; Aveyard, Paul; Jolly, Kate; Denley, John; Lewis, Amanda; Daley, Amanda J

2014-06-01

Many overweight people take action to lose weight but most regain this weight. To examine the effectiveness of a weight maintenance intervention focused on regular self-weighing after receiving a 12-week weight loss programme. Quasi-randomized controlled trial of 3768 obese or overweight men and women. The intervention group (n = 3290) received two telephone calls, the offer of free weighing scales, encouragement to weigh themselves weekly and record this on a card. The main outcome was change in weight between 3 and 12 months. Using intention to treat analysis both groups regained weight; however, the intervention group on average regained 1.23 kg, whereas the control group regained 1.83 kg. Adjusting for covariates resulted in a mean difference of 0.68 kg (95% CI 0.12, 1.24) at 12-month follow-up. Encouraging people who have recently lost weight to weigh themselves regularly prevents some weight regain. © The Author 2013. Published by Oxford University Press on behalf of Faculty of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Hydrostatic weighing at residual volume and functional residual capacity.

PubMed

Thomas, T R; Etheridge, G L

1980-07-01

Hydrostatic weighing (HW) was performed at both residual volume (RV) and functional residual capacity (FRC) to determine if underwater weighing at different lung volumes affected the measurement of body density. Subjects were 43 males, 18-25 yr. Subjects were submerged in the prone position, and the lung volume was measured by helium dilution at the time of the underwater weighing. Underwater weight was first assessed at FRC followed by assessment at RV. Changes in lung volume were accurately reflected in the underwater weight. Body density (D) was not different with the use of the FRC (mean D = 1.0778) or RV (mean D = 1.0781) data. Percent fat values for the FRC and RV data were 9.3 +/- 5.4 and 9.2 +/- 5.1%, respectively, and were not statistically different. The results indicate that the difference between percent fat determinations by HW in the prone position at FRC and RV is negligible. Because measurement of underwater weight at FRC is more comfortable for the subject, this may be the method of choice when the lung volume can be measured during the underwater weighing.

HRV analysis and blood pressure monitoring on weighing scale using BCG.

PubMed

Shin, Jae Hyuk; Park, Kwang Suk

2012-01-01

Using the Ballistocardiogram(BCG) measured on weighing scale, heart rate variability(HRV) and blood pressure were estimated. BCG was measured while subjects were on weighing scale in resting state and under the Valsalva maneuver and static exercise condition to induce the change in cardiac autonomic rhythm. Time domain, frequency domain and nonlinear HRV parameters were estimated from the measured BCG and compared with the ones calculated from ECG measured simultaneously. For blood pressure(BP) estimation, ECG was measured additionally on the feet using dry electrodes simultaneously installed on weighing scale and R-J intervals were extracted as a BP correlated parameter at every beat cycle. HRV estimation results shows the correlation higher than 0.97, and the estimated BP was similar to the measured BP with a reliable correlations.

Density Measurement of Tridecane by using Hydrostatic Weighing System at Density Laboratory, NML-SIRIM

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nor, Mohd. Fazrul Hisyam Mohd.; Othman, Hafidzah; Abidin, Abd. Rashid Zainal

2009-07-07

This paper presents the density measurement of tridecane by using hydrostatic weighing system, which is currently practised in Density Laboratory of National Metrology Laboratory (NML), SIRIM Berhad. This system weighed the crystal sphere while the crystal sphere was immersed in the tridecane. The volume and mass in air of the crystal sphere were calibrated at KRISS, Korea. The uncertainties of volume and mass in air of the crystal sphere were 4 ppm and 0.3 ppm respectively.

Advantages from Mixed Storage of Ammunition

DTIC Science & Technology

1983-07-01

A^dN^MM ADy^->6y 7<^ TECHNICAL REPORT ARBRL-TR-02506 ADVANTAGES FROM MIXED STORAGE OF AMMUNITION Ona R. Lyman July 1983 US ARMY ARMAMENT...that "weigh out." Benefits can be derived from mixing an ammunition that "weighs out" with ammunition that "cubes out." In principle, it is...accessible. Below is listed a step-by-step procedure for determining benefits to be derived. Step 1. Select a munition that "weighs out" and note if more

Analysis of drift correction in different simulated weighing schemes

NASA Astrophysics Data System (ADS)

Beatrici, A.; Rebelo, A.; Quintão, D.; Cacais, F. L.; Loayza, V. M.

2015-10-01

In the calibration of high accuracy mass standards some weighing schemes are used to reduce or eliminate the zero drift effects in mass comparators. There are different sources for the drift and different methods for its treatment. By using numerical methods, drift functions were simulated and a random term was included in each function. The comparison between the results obtained from ABABAB and ABBA weighing series was carried out. The results show a better efficacy of ABABAB method for drift with smooth variation and small randomness.

7 CFR 70.10 - Basis of grading service.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT (CONTINUED) VOLUNTARY GRADING OF POULTRY...-cook carcasses weighing under 6 pounds in large bulk containers. For individual carcasses weighing...

48 CFR 245.7309-9 - Weighing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... and accomplished on— (1) Contractor scales; (2) Certified scales; or (3) Other scales acceptable to both parties. (b) When removal is by rail, weighing shall be on railroad scales or by other means...

Eat More, Weigh Less?

MedlinePlus

... Physical Activity Overweight & Obesity Healthy Weight Breastfeeding Micronutrient Malnutrition State and Local Programs Eat More, Weigh Less? ... Physical Activity Overweight & Obesity Healthy Weight Breastfeeding Micronutrient Malnutrition State and Local Programs Language: English Español (Spanish) ...

Design of a Capacitive Flexible Weighing Sensor for Vehicle WIM System

PubMed Central

Cheng, Lu; Zhang, Hongjian; Li, Qing

2007-01-01

With the development of the Highway Transportation and Business Trade, vehicle weigh-in-motion (WIM) technology has become a key technology and trend of measuring traffic loads. In this paper, a novel capacitive flexible weighing sensor which is light weight, smaller volume and easy to carry was applied in the vehicle WIM system. The dynamic behavior of the sensor is modeled using the Maxwell-Kelvin model because the materials of the sensor are rubbers which belong to viscoelasticity. A signal processing method based on the model is presented to overcome effects of rubber mechanical properties on the dynamic weight signal. The results showed that the measurement error is less than ±10%. All the theoretic analysis and numerical results demonstrated that appliance of this system to weigh in motion is feasible and convenient for traffic inspection.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abercrombie, Robert Knox; Richardson, Gregory David; Scudiere, Matthew Bligh

A pad is disclosed for use in a weighing system for weighing a load. The pad includes a weighing platform, load cells, and foot members. Improvements to the pad reduce or substantially eliminate rotation of one or more of the corner foot members. A flexible foot strap disposed between the corner foot members reduces rotation of the respective foot members about vertical axes through the corner foot members and couples the corner foot members such that rotation of one corner foot member results in substantially the same amount of rotation of the other corner foot member. In a strapless variantmore » one or more fasteners prevents substantially all rotation of a foot member. In a diagonal variant, a foot strap extends between a corner foot member and the weighing platform to reduce rotation of the foot member about a vertical axis through the corner foot member.« less

A comparison of body fat determined by underwater weighing and volume displacement.

PubMed

Ward, A; Pollock, M L; Jackson, A S; Ayres, J J; Pape, G

1978-01-01

Two hydrostatic techniques, underwater weighing and water displacement, were used to determine body fat for 67 volunteer men between 25 and 61 yr of age (-/x=41 yr). All tests were administered in random order in the morning on the same day while subjects were in the postabsorptive state. Test-retest reliabilities for the underwater weighing and water displacement techniques were 0.995 and 0.96, respectively. The correlation between the two hydrostatic techniques was r=0.96. The mean percent fat determined by underwater weighing (-/x=20.1 +/- 6.4) and water displacement (-/x=19.4 +/- 6.1) were significantly different (t=28.16; df=65; P less than 0.001). These analyses showed that both techniques were reliable in measuring percent body fat, but produced slight systematic differences. Regression equations were provided to adjust for the difference.

Low-cost, distributed, sensor-based weigh-in-motion systems.

DOT National Transportation Integrated Search

2009-12-01

Monitoring truck weights is essential for traffic operations, roadway design, traffic safety, and regulations. : Traditional roadside static truck weighing stations have many operational shortcomings, and so there have : been ongoing efforts to devel...

7 CFR 800.157 - Official weighing records.

Code of Federal Regulations, 2010 CFR

2010-01-01

... and Forms (general) § 800.157 Official weighing records. (a) Scale ticket, scale tape, or other weight... shall consist of a scale ticket, a scale tape, or any other weight record prescribed in the instructions...

Who Self-Weighs and What Do They Gain From It? A Retrospective Comparison Between Smart Scale Users and the General Population in England.

PubMed

Sperrin, Matthew; Rushton, Helen; Dixon, William G; Normand, Alexis; Villard, Joffrey; Chieh, Angela; Buchan, Iain

2016-01-21

Digital self-monitoring, particularly of weight, is increasingly prevalent. The associated data could be reused for clinical and research purposes. The aim was to compare participants who use connected smart scale technologies with the general population and explore how use of smart scale technology affects, or is affected by, weight change. This was a retrospective study comparing 2 databases: (1) the longitudinal height and weight measurement database of smart scale users and (2) the Health Survey for England, a cross-sectional survey of the general population in England. Baseline comparison was of body mass index (BMI) in the 2 databases via a regression model. For exploring engagement with the technology, two analyses were performed: (1) a regression model of BMI change predicted by measures of engagement and (2) a recurrent event survival analysis with instantaneous probability of a subsequent self-weighing predicted by previous BMI change. Among women, users of self-weighing technology had a mean BMI of 1.62 kg/m(2) (95% CI 1.03-2.22) lower than the general population (of the same age and height) (P<.001). Among men, users had a mean BMI of 1.26 kg/m(2) (95% CI 0.84-1.69) greater than the general population (of the same age and height) (P<.001). Reduction in BMI was independently associated with greater engagement with self-weighing. Self-weighing events were more likely when users had recently reduced their BMI. Users of self-weighing technology are a selected sample of the general population and this must be accounted for in studies that employ these data. Engagement with self-weighing is associated with recent weight change; more research is needed to understand the extent to which weight change encourages closer monitoring versus closer monitoring driving the weight change. The concept of isolated measures needs to give way to one of connected health metrics.

Feasibility of an estimated method using graduated utensils to estimate food portion size in infants aged 4 to 18 months.

PubMed

Bradley, Jennifer; West-Sadler, Sarah; Foster, Emma; Sommerville, Jill; Allen, Rachel; Stephen, Alison M; Adamson, Ashley J

2018-01-01

The Diet and Nutrition Survey of Infants and Young Children (DNSIYC) was carried out in 2011 to assess the nutrient intakes of 4 to 18 month old infants in the UK. Prior to the main stage of DNSIYC, pilot work was undertaken to determine the impact of using graduated utensils to estimate portion sizes. The aims were to assess whether the provision of graduated utensils altered either the foods given to infants or the amount consumed by comparing estimated intakes to weighed intakes. Parents completed two 4-day food diaries over a two week period; an estimated diary using graduated utensils and a weighed diary. Two estimated diary formats were tested; half the participants completed estimated diaries in which they recorded the amount of food/drink served and the amount left over, and the other half recorded the amount of food/drink consumed only. Median daily food intake for the estimated and the weighed method were similar; 980g and 928g respectively. There was a small (6.6%) but statistically significant difference in energy intake reported by the estimated and the weighed method; 3189kJ and 2978kJ respectively. There were no statistically significant differences between estimated intakes from the served and left over diaries and weighed intakes (p>0.05). Estimated intakes from the amount consumed diaries were significantly different to weighed intakes (food weight (g) p = 0.02; energy (kJ) p = 0.01). There were no differences in intakes of amorphous (foods which take the shape of the container, e.g. pureed foods, porridge) and discrete food items (individual pieces of food e.g. biscuits, rice cakes) between the two methods. The results suggest that the household measures approach to reporting portion size, with the combined use of the graduated utensils, and recording the amount served and the amount left over in the food diaries, may provide a feasible alternative to weighed intakes.

Feasibility of an estimated method using graduated utensils to estimate food portion size in infants aged 4 to 18 months

PubMed Central

West-Sadler, Sarah; Foster, Emma; Sommerville, Jill; Allen, Rachel; Stephen, Alison M.; Adamson, Ashley J.

2018-01-01

The Diet and Nutrition Survey of Infants and Young Children (DNSIYC) was carried out in 2011 to assess the nutrient intakes of 4 to 18 month old infants in the UK. Prior to the main stage of DNSIYC, pilot work was undertaken to determine the impact of using graduated utensils to estimate portion sizes. The aims were to assess whether the provision of graduated utensils altered either the foods given to infants or the amount consumed by comparing estimated intakes to weighed intakes. Parents completed two 4-day food diaries over a two week period; an estimated diary using graduated utensils and a weighed diary. Two estimated diary formats were tested; half the participants completed estimated diaries in which they recorded the amount of food/drink served and the amount left over, and the other half recorded the amount of food/drink consumed only. Median daily food intake for the estimated and the weighed method were similar; 980g and 928g respectively. There was a small (6.6%) but statistically significant difference in energy intake reported by the estimated and the weighed method; 3189kJ and 2978kJ respectively. There were no statistically significant differences between estimated intakes from the served and left over diaries and weighed intakes (p>0.05). Estimated intakes from the amount consumed diaries were significantly different to weighed intakes (food weight (g) p = 0.02; energy (kJ) p = 0.01). There were no differences in intakes of amorphous (foods which take the shape of the container, e.g. pureed foods, porridge) and discrete food items (individual pieces of food e.g. biscuits, rice cakes) between the two methods. The results suggest that the household measures approach to reporting portion size, with the combined use of the graduated utensils, and recording the amount served and the amount left over in the food diaries, may provide a feasible alternative to weighed intakes. PMID:29879140

Frequent self-weighing with electronic graphic feedback to prevent age-related weight gain in young adults

PubMed Central

Bertz, Fredrik; Pacanowski, Carly R.; Levitsky, David A.

2016-01-01

Background Young adults display substantial weight gain. Preventing this age-related weight gain would reduce overweight and obesity. Objective We evaluated an internet based intervention using Internet-connected scales and graphic email feedback; the Caloric Titration Method (CTM), to reduce age-related weight gain over the course of 1 y among first-year college students. Design First-year college students (n=167) were randomized to (CTM) or control (C) group. Both groups were provided Internet-connected scales. CTM group was instructed to weigh daily, view a weight graph emailed to them after weighing, and try to maintain their weight as indicated in the graph. The C group could weigh at any time, but did not receive feedback. At six months and 1 year the C group were notified to provide weights. Intention to treat analysis, using a mixed model adjusted for baseline weight, BMI and gender was used to analyze the effect of the intervention. Results Baseline Body Mass Index was 22.9 ± 3.0 kg/m2. Frequency of self-weighing (median) was 5 times/week in the CTM group, compared to 1 time/week in C (p<0.001). Ninety-five percent of the CTM participants weighed ≥3 times/week, compared to 15% in C group (p<0.001). After 1 year the C group had gained 1.1 ± 4.4 kg whereas the CTM group lost 0.5 ± 3.7 kg, yielding a significant overall time*group interaction (F=3.39, p=0.035). The difference in weight change between the two groups at 1 year was significant (p=0.004). Weight change of the CTM group was not different from zero whereas weight gain in C group was significant. Retention was 81%. Conclusions The internet based frequent self-weighing CTM system was effective in preventing age-related weight gain in young adults over one year and thus offers promise to reduce overweight and obesity. PMID:26414563

Weighing Molecules on Mars

NASA Image and Video Library

2012-11-02

New results from the Sample Analysis at Mars, or SAM, instrument on NASA Curiosity rover detected about 2,000 times as much argon-40 as argon-36, which weighs less, confirming the connection between Mars and Martian meteorites found on Earth.

Remote balance weighs accurately amid high radiation

NASA Technical Reports Server (NTRS)

Eggenberger, D. N.; Shuck, A. B.

1969-01-01

Commercial beam-type balance, modified and outfitted with electronic controls and digital readout, can be remotely controlled for use in high radiation environments. This allows accurate weighing of breeder-reactor fuel pieces when they are radioactively hot.

Implementation of weigh-in-motion (WIM) systems.

DOT National Transportation Integrated Search

2009-02-01

This research finished the development and implementation of a novel and durable, higher voltage, : and lower temperature dependant weigh-in-motion (WIM) sensor that was begun under an earlier : research project. These better sensors will require few...

4. FLUX STORAGE HOPPERS ON THE WEIGHING FLOOR OF THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. FLUX STORAGE HOPPERS ON THE WEIGHING FLOOR OF THE FURNACE AISLE IN THE BOP SHOP LOOKING SOUTHWEST. - U.S. Steel Duquesne Works, Basic Oxygen Steelmaking Plant, Along Monongahela River, Duquesne, Allegheny County, PA

Body Fat Measurement: Weighing the Pros and Cons of Electrical Impedance.

ERIC Educational Resources Information Center

Nash, Heyward L.

1985-01-01

Research technologists have developed electrical impedance units in response to demand for a convenient and reliable method of measuring body fat. Accuracy of impedance measures versus calipers and underwater weighing are discussed. (MT)

Weigh-in-Motion systems evaluation : final report.

DOT National Transportation Integrated Search

1976-04-01

This relatively short-term project was initiated in order to perfect installation, operation, and maintenance practices necessary for continued accurate and reliable operation of a computerized Weigh-in-Motion system which will be used to gather truc...

Quantifying precision of in situ length and weight measurements of fish

USGS Publications Warehouse

Gutreuter, S.; Krzoska, D.J.

1994-01-01

We estimated and compared errors in field-made (in situ) measurements of lengths and weights of fish. We made three measurements of length and weight on each of 33 common carp Cyprinus carpio, and on each of a total of 34 bluegills Lepomis macrochirus and black crappies Pomoxis nigromaculatus. Maximum total lengths of all fish were measured to the nearest 1 mm on a conventional measuring board. The bluegills and black crappies (85–282 mm maximum total length) were weighed to the nearest 1 g on a 1,000-g spring-loaded scale. The common carp (415–600 mm maximum total length) were weighed to the nearest 0.05 kg on a 20-kg spring-loaded scale. We present a statistical model for comparison of coefficients of variation of length (Cl ) and weight (Cw ). Expected Cl was near zero and constant across mean length, indicating that length can be measured with good precision in the field. Expected Cw decreased with increasing mean length, and was larger than expected Cl by 5.8 to over 100 times for the bluegills and black crappies, and by 3 to over 20 times for the common carp. Unrecognized in situ weighing errors bias the apparent content of unique information in weight, which is the information not explained by either length or measurement error. We recommend procedures to circumvent effects of weighing errors, including elimination of unnecessary weighing from routine monitoring programs. In situ weighing must be conducted with greater care than is common if the content of unique and nontrivial information in weight is to be correctly identified.

49 CFR 375.513 - Must I give the individual shipper an opportunity to observe the weighing?

Code of Federal Regulations, 2010 CFR

2010-10-01

... MOTOR CARRIER SAFETY REGULATIONS TRANSPORTATION OF HOUSEHOLD GOODS IN INTERSTATE COMMERCE; CONSUMER PROTECTION REGULATIONS Pick Up of Shipments of Household Goods Weighing the Shipment § 375.513 Must I give...

LTBP Program's Literature Review on Weigh-in-Motion System

DOT National Transportation Integrated Search

2016-06-01

Truck size and weight are regulated using Federal and State legislation and policies to ensure safety and preserve bridge and high infrastructure. Weigh-in-motion (WIM) systems can capture the weight and other defining characteristics of the vehicles...

Deploying weigh-in-motion installations on asphalt concrete pavements.

DOT National Transportation Integrated Search

2010-02-01

The strategic plan for establishing a vehicle weight monitoring net across Texas calls for deploying two : technology types piezoelectric and bending plate systems, and seeks to install weigh-in-motion (WIM) : systems in roadways that are under n...

States' Successful Practices Weigh-in-Motion Handbook

DOT National Transportation Integrated Search

1997-12-15

The purpose of this Handbook is to provide practical advice for users of weigh-in-motion (WIM) technology, systems, sites, and states' "Successful Practices" using WIM systems. The states selected for each WIM system discussed in this Handbook are: C...

6. FLUX WEIGH HOPPERS AND SCALES ON THE BATCHING FLOOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. FLUX WEIGH HOPPERS AND SCALES ON THE BATCHING FLOOR OF THE FURNACE AISLE IN THE BOP SHOP LOOKING SOUTHWEST. - U.S. Steel Duquesne Works, Basic Oxygen Steelmaking Plant, Along Monongahela River, Duquesne, Allegheny County, PA

Traffic-load forecasting using weigh-in-motion data

DOT National Transportation Integrated Search

1997-03-01

Vehicular traffic loading is a crucial consideration for the design and maintenance of pavements. With the help of weigh-in-motion (WIM) systems, the information about date, time, speed, lane of travel, lateral lane position, axle spacing, and wheel ...

A study of weigh station technologies and practices.

DOT National Transportation Integrated Search

2008-11-01

This study was requested in response to concerns about the operation of the : Greenwich Weigh and Inspection Station (Greenwich Station) on I-95 Northbound. The : Stations configuration, combined with both the size and volume of trucks and buses :...

Development of a portable weigh-in-motion system.

DOT National Transportation Integrated Search

2013-03-01

Weigh-In-Motion (WIM) data is used for a variety of roadway design and safety purposes. In compliance with Federal Highway Administration (FHWA) mandates, many states have installed permanent WIM sites to measure vehicle weight. Expanding current sit...

Collection and Analysis of Augmented Weigh-In-Motion Data

DOT National Transportation Integrated Search

1996-12-01

Traffic loading data are essential for the planning and design of adequate and cost-effective highway pavements. Data from an augmented weigh-in-motion (WIM) system have been collected and analyzed. The augmented WIM systems, which comprise bending-p...

46 CFR 160.055-8 - Marking.

Code of Federal Regulations, 2010 CFR

2010-10-01

... GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Life Preservers, Unicellular Plastic Foam, Adult and Child, for... persons weighing over 90 pounds); or (2) Child (for persons weighing less than 90 pounds). (b) In letters...

46 CFR 160.002-6 - Marking.

Code of Federal Regulations, 2010 CFR

2010-10-01

... GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Life Preservers, Kapok, Adult and Child (Jacket Type), Models 3... persons weighing over 90 pounds); or (2) Child (for persons weighing less than 90 pounds). (b) In letters...

46 CFR 160.005-6 - Marking.

Code of Federal Regulations, 2010 CFR

2010-10-01

... GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Life Preservers, Fibrous Glass, Adult and Child (Jacket Type... persons weighing over 90 pounds); or (2) Child (for persons weighing less than 90 pounds). (b) In letters...

Montana Weigh-in-Motion (WIM) and Automatic Traffic Recorder (ATR) Strategy Final Report

DOT National Transportation Integrated Search

2017-03-01

The objective of this project was to review the Montana Department of Transportations (MDTs) permanent Weigh-in-Motion (WIM) and Automated Traffic Recorder (ATR) data collection programs to ensure they are efficiently providing the best possibl...

49 CFR 375.511 - May I use an alternative method for shipments weighing 3,000 pounds or less?

Code of Federal Regulations, 2010 CFR

2010-10-01

... MOTOR CARRIER SAFETY REGULATIONS TRANSPORTATION OF HOUSEHOLD GOODS IN INTERSTATE COMMERCE; CONSUMER PROTECTION REGULATIONS Pick Up of Shipments of Household Goods Weighing the Shipment § 375.511 May I use an...

Weigh-in-Motion Sensor and Controller Operation and Performance Comparison

DOT National Transportation Integrated Search

2018-01-01

This research project utilized statistical inference and comparison techniques to compare the performance of different Weigh-in-Motion (WIM) sensors. First, we analyzed test-vehicle data to perform an accuracy check of the results reported by the sen...

Effective Use of Weigh-in-Motion Data : The Netherlands Case Study

DOT National Transportation Integrated Search

2007-10-01

Transportation and law enforcement agencies in the Netherlands have developed a robust weigh-in-motion (WIM) data management system that supports a broad array of vehicle weight regulation and enforcement activities, as well as long-term planning and...

Portable bench tester for piezo weigh-in-motion equipment : final report, June 2006.

DOT National Transportation Integrated Search

2006-06-01

The Ohio Department of Transportation's (ODOT) piezo weigh-in-motion (WIM) equipment must be tested for initial working operation and to insure continued correct operation. Currently, the only available method to verify the vehicle classification par...

The avoidance of weigh stations in Virginia by overweight trucks.

DOT National Transportation Integrated Search

1992-01-01

The primary objective of this research was to examine the avoidance of weigh stations in Virginia by overweight trucks. Secondary objectives were (1) to determine the magnitude of overweight truck activity on selected routes and (2) to compare traffi...

A weight of evidence framework for environmental assessments: Inferring Qualities

EPA Science Inventory

The weighing of heterogeneous evidence such as conventional laboratory toxicity tests, field tests, biomarkers, and community surveys is essential to environmental assessments. Evidence synthesis and weighing is needed to determine causes of observed effects, hazards posed by ch...

Testing and development of transfer functions for weighing precipitation gauges in WMO-SPICE

NASA Astrophysics Data System (ADS)

Kochendorfer, John; Nitu, Rodica; Wolff, Mareile; Mekis, Eva; Rasmussen, Roy; Baker, Bruce; Earle, Michael E.; Reverdin, Audrey; Wong, Kai; Smith, Craig D.; Yang, Daqing; Roulet, Yves-Alain; Meyers, Tilden; Buisan, Samuel; Isaksen, Ketil; Brækkan, Ragnar; Landolt, Scott; Jachcik, Al

2018-02-01

Weighing precipitation gauges are used widely for the measurement of all forms of precipitation, and are typically more accurate than tipping-bucket precipitation gauges. This is especially true for the measurement of solid precipitation; however, weighing precipitation gauge measurements must still be adjusted for undercatch in snowy, windy conditions. In WMO-SPICE (World Meteorological Organization Solid Precipitation InterComparison Experiment), different types of weighing precipitation gauges and shields were compared, and adjustments were determined for the undercatch of solid precipitation caused by wind. For the various combinations of gauges and shields, adjustments using both new and previously existing transfer functions were evaluated. For most of the gauge and shield combinations, previously derived transfer functions were found to perform as well as those more recently derived. This indicates that wind shield type (or lack thereof) is more important in determining the magnitude of wind-induced undercatch than the type of weighing precipitation gauge. It also demonstrates the potential for widespread use of the previously developed transfer functions. Another overarching result was that, in general, the more effective shields, which were associated with smaller unadjusted errors, also produced more accurate measurements after adjustment. This indicates that although transfer functions can effectively reduce measurement biases, effective wind shielding is still required for the most accurate measurement of solid precipitation.

Cerebral palsy rates among low-birthweight infants fell in the 1990s.

PubMed

Surman, Geraldine; Newdick, Helen; Johnson, Ann

2003-07-01

Using a population-based register, this study sought to ascertain changes in the rate and severity of cerebral palsy (CP) in a geographically defined area of the UK among infants weighing less than 1500 g and born between 1984 and 1995. There were 417414 live births in the area, which included Berkshire, Buckinghamshire, Northamptonshire, and Oxfordshire. Of the 898 children with CP (526 males, 372 females), 194 (21.6%) weighed less than 1500 g at birth. The overall CP rate for neonatal survivors fell from 2.5 out of every 1000 in 1984 to 1986 to 1.7 in 1993 to 1995. The rate for those weighing less than 1000 g rose to 90 out of every 1000 neonatal survivors in 1987 to 1989 and then fell to 57 in 1993 to 1995. A similar pattern is seen among infants weighing 1000 to 1499 g at birth, the rate rising to 77 in 1987 to 1988 and then falling to 40 in 1993 to 1995. The rate of severe motor disability among infants weighing less than 1500 g also decreased (24.6 in 1984-1986 to 12.5 in 1993-1995). The relation of these findings to changes in perinatal care in the early 1990s is not known.

An evaluation of a bioelectrical impedance analyser for the estimation of body fat content.

PubMed Central

Maughan, R J

1993-01-01

Measurement of body composition is an important part of any assessment of health or fitness. Hydrostatic weighing is generally accepted as the most reliable method for the measurement of body fat content, but is inconvenient. Electrical impedance analysers have recently been proposed as an alternative to the measurement of skinfold thickness. Both these latter methods are convenient, but give values based on estimates obtained from population studies. This study compared values of body fat content obtained by hydrostatic weighing, skinfold thickness measurement and electrical impedance on 50 (28 women, 22 men) healthy volunteers. Mean(s.e.m.) values obtained by the three methods were: hydrostatic weighing, 20.5(1.2)%; skinfold thickness, 21.8(1.0)%; impedance, 20.8(0.9)%. The results indicate that the correlation between the skinfold method and hydrostatic weighing (0.931) is somewhat higher than that between the impedance method and hydrostatic weighing (0.830). This is, perhaps, not surprising given the fact that the impedance method is based on an estimate of total body water which is then used to calculate body fat content. The skinfold method gives an estimate of body density, and the assumptions involved in the conversion from body density to body fat content are the same for both methods. PMID:8457817

Validity and reliability of the BOD POD® S/T tracking system.

PubMed

Tseh, W; Caputo, J L; Keefer, D J

2010-10-01

BOD POD(®) self-testing (S/T) body composition tracking system is a practical assessment tool designed for use in the health and fitness industries. Relative to its parent counterpart, the BOD POD(®) S/T has received little research attention. The primary purpose was to determine the validity of the BOD POD(®) S/T against hydrostatic weighing and 7-site skinfolds. Secondary aim was to determine the within-day and between-day reliability of the BOD POD(®) S/T. After a period of equipment and testing accommodation, volunteer's (N=50) body composition (%BF) via 7-site skinfolds, BOD POD(®) S/T, and hydrostatic weighing were obtained on the second and third visits. BOD POD(®) S/T significantly overestimated %BF when compared to hydrostatic weighing and 7-site skinfolds. There was no statistical difference between 7-site skinfolds and hydrostatic weighing values. BOD POD(®) S/T reliability within-day and between-days were high. While the BOD POD(®) S/T body composition tracking system is deemed reliable both within-day and between-days, it did significantly overestimate %BF in comparison to hydrostatic weighing and skinfolds. Future research should be aimed at deriving a correction factor for this body composition assessment tool. © Georg Thieme Verlag KG Stuttgart · New York.

Genetics of animal temperament: aggressive behaviour at mixing is genetically associated with the response to handling in pigs.

PubMed

D'Eath, R B; Roehe, R; Turner, S P; Ison, S H; Farish, M; Jack, M C; Lawrence, A B

2009-11-01

Aggression when pigs are mixed into new social groups has negative impacts on welfare and production. Aggressive behaviour is moderately heritable and could be reduced by genetic selection. The possible wider impacts of selection for reduced aggressiveness on handling traits and activity in the home pen were investigated using 1663 male and female pedigree pigs (898 purebred Yorkshire and 765 Yorkshire × Landrace). Aggressive behaviour was observed over 24 h after pigs were mixed at 10 weeks of age into groups balanced for unfamiliarity and weight. Aggression was highly heritable (duration of involvement in reciprocal fighting h2 = 0.47 ± 0.03, and duration of delivering one-sided aggression h2 = 0.34 ± 0.03). Three weeks after mixing, home pen inactivity (indicated by the frequency of lying) was observed over 24 h. Inactivity was weakly heritable (h2 = 0.05 ± 0.01) but showed no significant genetic association with aggression. Pigs' behaviour during handling by humans was assessed on entry to, whilst inside and on exit from a weigh crate at both mixing and end of test at 22 weeks. Pigs were generally easy to handle, moving easily into and out of the crate. Scores indicating 'very difficult to move' were rare. Handling scores at weighing were weakly heritable (h2 = 0.03 to 0.17), and moderately correlated across the two weighings (rg = 0.28 to 0.76). Aggressive behaviour at mixing was genetically associated with handling at the end of test weighing: pigs that fought and delivered one-sided aggression had handling scores indicating more active behaviour at weighing (e.g. moving quickly into the crate v. fighting rg = 0.41 ± 0.05 and v. bullying rg = 0.60 ± 0.04). Also, there was a genetic association between receiving one-side aggression at mixing and producing high-pitched vocalisations in the weigh crate (rg = 0.78 ± 0.08). Correlated behavioural responses occurring across different challenging situations (e.g. social mixing and human handling) have been described by the concept of animal temperament (also known as coping styles, personality or behavioural syndromes), but this has rarely been demonstrated at the genetic level in farm animals. These findings may have practical implications for the development of breeding programmes aimed at altering animal temperament. Breeding to reduce aggression could result in some reduction in activity at weighing. This would have consequences for animal production, because pigs which are inactive at weighing take longer to move into and out of the weigh crate, and perhaps also for animal welfare.

The Oregon DOT Slow-Speed Weigh-in-Motion (SWIM) Project : final report

DOT National Transportation Integrated Search

1998-12-01

Weigh-in-motion (WIM) systems have been increasingly used to screen potentially overweight vehicles. However, under slow speed conditions (less than 10 mph), WIM scales appear to be capable of estimating static gross vehicle weight to within 110% wit...

WEIGHT OF EVIDENCE IN ECOLOGICAL ASSESSMENT

EPA Science Inventory

This document provides guidance on methods for weighing ecological evidence using a a standard framework consisting of three steps: assemble evidence, weight evidence and weigh the body of evidence. Use of the methods will improve the consistency and reliability of WoE-based asse...

Learning about Proteins

MedlinePlus

... day, kids need to eat about 0.5 grams of protein for every pound (0.5 kilograms) they weigh. That's a gram for every 2 pounds (1 kilogram) you weigh. ... adult size. Adults, for instance, need about 60 grams per day. To figure out your protein needs, ...

A Load Cell for Hydrostatic Weighing

ERIC Educational Resources Information Center

Fahey, Thomas D.; Schroeder, Richard

1978-01-01

Although a load cell is more expensive than the autopsy scale for hydrostatic weighing, it is more accurate, easier to read, has no moving parts, is less susceptible to rust, and is less likely to be damaged by large subjects exceeding its capacity. (Author)

77 FR 65855 - Cancellation of Indianapolis Grain Inspection & Weighing Service, Inc. Designation; Selection of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-31

... DEPARTMENT OF AGRICULTURE Grain Inspection, Packers and Stockyards Administration Cancellation of Indianapolis Grain Inspection & Weighing Service, Inc. Designation; Selection of Interim Provider; Opportunity for Designation in the Indianapolis, IN Area AGENCY: Grain Inspection, Packers and Stockyards...

The First Weighing of Plutonium

DOE R&D Accomplishments Database

Seaborg, Glenn T.

1967-09-10

Recollections and reminiscences at the 25th Anniversary of the First Weighing of Plutonium, Chicago, IL, September 10, 1967, tell an important part of the story of this fascinating new element that is destined to play an increasingly significant role in the future of man.

Overestimation of infant and toddler energy intake by 24-h recall compared with weighed food records.

PubMed

Fisher, Jennifer O; Butte, Nancy F; Mendoza, Patricia M; Wilson, Theresa A; Hodges, Eric A; Reidy, Kathleen C; Deming, Denise

2008-08-01

Twenty-four-hour dietary recalls have been used in large surveys of infant and toddler energy intake, but the accuracy of the method for young children is not well documented. We aimed to determine the accuracy of infant and toddler energy intakes by a single, telephone-administered, multiple-pass 24-h recall as compared with 3-d weighed food records. A within-subjects design was used in which a 24-h recall and 3-d weighed food records were completed within 2 wk by 157 mothers (56 non-Hispanic white, 51 non-Hispanic black, and 50 Hispanic) of 7-11-mo-old infants or 12-24-mo-old toddlers. Child and caregiver anthropometrics, child eating patterns, and caregiver demographics and social desirability were evaluated as correlates of reporting bias. Intakes based on 3-d weighed food records were within 5% of estimated energy requirements. Compared with the 3-d weighed food records, the 24-h recall overestimated energy intake by 13% among infants (740 +/- 154 and 833 +/- 255 kcal, respectively) and by 29% among toddlers (885 +/- 197 and 1140 +/- 299 kcal, respectively). Eating patterns (ie, frequency and location) did not differ appreciably between methods. Macronutrient and micronutrient intakes were higher by 24-h recall than by 3-d weighed food record. Dairy and grains contributed the most energy to the diet and accounted for 74% and 54% of the overestimation seen in infants and toddlers, respectively. Greater overestimation was associated with a greater number of food items reported by the caregiver and lower child weight-for-length z scores. The use of a single, telephone-administered, multiple-pass 24-h recall may significantly overestimate infant or toddler energy and nutrient intakes because of portion size estimation errors.

Monitoring low birth weight: an evaluation of international estimates and an updated estimation procedure.

PubMed Central

Blanc, Ann K.; Wardlaw, Tessa

2005-01-01

OBJECTIVE: To critically examine the data used to produce estimates of the proportion of infants with low birth weight in developing countries and to describe biases in these data. To assess the effect of adjustment procedures on the estimates and propose a modified estimation procedure for international reporting purposes. METHODS: Mothers' reports about their recent births in 62 nationally representative Demographic and Health Surveys (DHS) conducted between 1990 and 2000 were analysed. The proportion of infants weighed at birth, characteristics of those weighed, extent of misreporting, and mothers' subjective assessments of their children's size at birth were examined. FINDINGS: In many developing countries the majority of infants were not weighed at birth. Those who were weighed were more likely to have mothers who live in urban areas and are educated, and to be born in a medical facility with assistance from medically trained personnel. Birth weights reported by mothers are "heaped" on multiples of 500 grams. CONCLUSION: Current survey-based estimates of the prevalence of low birth weight are biased substantially downwards. Two adjustments to reported data are recommended: a weighting procedure that combines reported birth weights with mothers' assessment of the child's size at birth, and categorization of one-quarter of the infants reported to have a birth weight of exactly 2500 grams as having low birth weight. Averaged over all surveys, these procedures increased the proportion classified as having low birth weight by 25%. We also recommend that the proportion of infants not weighed at birth be routinely reported. Efforts are needed to increase the weighing of newborns and the recording of their weights. PMID:15798841

Second Interim Report on the Installation and Evaluation of Weigh-In-Motion Utilizing Quartz-Piezo Sensor Technology

DOT National Transportation Integrated Search

1999-11-01

The objective of this study is to determine the sensor survivability, accuracy and reliability of quartz-piezoelectric weigh-in-motion (WIM) sensors under actual traffic conditions in Connecticut's environment. This second interim report provides a s...

Wind-powered electrical systems : highway rest areas, weigh stations, and team section buildings.

DOT National Transportation Integrated Search

2009-02-01

This project considered the use of wind for providing electrical power at Illinois Department of Transportation : (IDOT) highway rest areas, weigh stations, and team section buildings. The goal of the project was to determine : the extent to which wi...

40 CFR 98.314 - Monitoring and QA/QC requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... accounting purposes including direct measurement weighing the petroleum coke fed into your process (by belt... line dioxide using plant instruments used for accounting purposes including direct measurement weighing... used to ensure the accuracy of monthly calcined petroleum coke consumption measurements. (c) You must...

Low-cost piezoelectric weigh-in-motion systems in Oregon : 1988-1993 : final report.

DOT National Transportation Integrated Search

1994-12-01

In 1988, The Oregon Department of Transportation installed low-cost piezoelectric weigh-in-motion cables at three locations and in ten lanes on Interstate 5 and 205. This report documents the installation of the systems, problems, and results from 19...

Statistical analysis of heavy truck loads using Wisconsin weigh-in-motion data

DOT National Transportation Integrated Search

2009-09-01

This study involved statistical evaluation of heavy truck loads that were recorded in 2007 using Weigh-In-Motion : stations located throughout the State of Wisconsin. The heaviest 5% of all trucks in each class and axle groupings were : selected for ...

A Practical Probabilistic Graphical Modeling Tool for Weighing Ecological Risk-Based Evidence

EPA Science Inventory

Past weight-of-evidence frameworks for adverse ecological effects have provided soft-scoring procedures for judgments based on the quality and measured attributes of evidence. Here, we provide a flexible probabilistic structure for weighing and integrating lines of evidence for e...

77 FR 66578 - Cancellation of Indianapolis Grain Inspection & Weighing Service, Inc. Designation; Selection of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-06

... Indianapolis Grain Inspection & Weighing Service, Inc. Designation; Selection of Interim Provider; Opportunity for Designation in the Indianapolis, IN Area; Correction AGENCY: Grain Inspection, Packers and Stockyards Administration, USDA. ACTION: Notice; correction. SUMMARY: The USDA, Grain Inspection, Packers and...

Analysis encapsulation of fiber Bragg gratings into polydimethylsiloxane for the needs of dynamic weighing

NASA Astrophysics Data System (ADS)

Fajkus, M.; Nedoma, J.; Martinek, R.; Novak, M.; Jargus, J.; Vasinek, V.

2017-05-01

Authors of the article focused on the possible encapsulation method of fiber Bragg gratings (FBGs) for the needs of dynamic weighing. For monitoring the parameters, we used broad-spectrum light source LED (Light-Emitting Diode) with a central wavelength of 1550 nm and optical spectrum analyzer with sampling rate 300 Hz. For encapsulation of used FBGs was chosen a specific material polymer polydimethylsiloxane (PDMS). A characteristic feature of this material is very high mechanical resistance, chemical resistance and temperature stability in the range of values -60 °C to + 200 °C. The combination of characteristic advantages of optical fibers (electromagnetic immunity) with stated properties of PDMS gives us the innovative type of encapsulated sensor which could be used for example for the needs of dynamic weighing in worsened or potentially hazardous conditions. This type of monitoring weighing is fully dielectric. Experimental measurements were carried out in laboratory conditions in the weight range of 35 up to 180 kg.

Changes in infant disposable diaper weights at selected intervals post-wetting.

PubMed

Carlisle, Joan; Moore, Amanda; Cooper, Alyssa; Henderson, Terri; Mayfield, Debbie; Taylor, Randa; Thomas, Jennifer; Van Fleet, Laduska; Askanazi, David; Fineberg, Naomi; Sun, Yanhui

2012-01-01

Pediatric acute care nurses questioned the practice of weighing disposable infant diapers immediately after voiding. This study asked the research question, "Does volume of saline, diaper configuration, and/or size of diaper statistically effect changes in diaper weights over time?" The method was an experimental, laboratory model. Pre-set volumes of saline were added to disposable diapers that were then left folded or unfolded. Each diaper was weighed immediately post-wetting and re-weighed at hourly intervals for seven hours. Data were analyzed using a repeated measures analysis of variance (RMANOVA) with balanced data (F-test). Diaper weight changes over time were statistically significant for all time points and for all volumes regardless of diaper size; however, the changes in weight were small and without clinical significance. It is appropriate to weigh diapers at the end of eight hours without risk of altering subsequent fluid management of patients in open-air, non-humidified environments. This practice has led to more efficient use of nurses' time with fewer interruptions for patients and families.

Next-generation wireless bridge weigh-in-motion (WIM) system integrated with nondestructive evaluation (NDE) capability for transportation infrastructure safety.

DOT National Transportation Integrated Search

2014-05-01

This project seeks to develop a rapidly deployable, low-cost, and wireless system for bridge : weigh-in-motion (BWIM) and nondestructive evaluation (NDE). The system is proposed to : assist in monitoring transportation infrastructure safety, for the ...

40 CFR 98.214 - Monitoring and QA/QC requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (for Equation U-2 of this subpart) must be determined annually from monthly measurements using the same plant instruments used for accounting purposes including purchase records or direct measurement, such as... accounting purposes including purchase records or direct measurement, such as weigh hoppers or belt weigh...

40 CFR 98.334 - Monitoring and QA/QC requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... used for accounting purposes including direct measurement weighing or through the use of purchase records same plant instruments or procedures that are used for accounting purposes (such as weigh hoppers... density and volume measurements, etc.). Record the total mass for the materials consumed each calendar...

Development, deployment, and evaluation of a remote monitoring system and a virtual weigh station : final report.

DOT National Transportation Integrated Search

2005-11-01

In order to extend commercial vehicle enforcement coverage to routes that are not monitored by fixed weigh stations, Kentucky has developed and implemented a Remote Monitoring System (RMS) and a Virtual Weight Station (VWS). The RMS captures images o...

A subsurface drip irrigation system for weighing lysimetry

USDA-ARS?s Scientific Manuscript database

Large, precision weighing lysimeters can have accuracies as good as 0.04 mm equivalent depth of water, adequate for hourly and even half-hourly determinations of evapotranspiration (ET) rate from crops. Such data are important for testing and improving simulation models of the complex interactions o...

7 CFR 800.17 - Special inspection and weighing requirements for sacked export grain.

Code of Federal Regulations, 2010 CFR

2010-01-01

... sacked export grain. 800.17 Section 800.17 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE... Requirements § 800.17 Special inspection and weighing requirements for sacked export grain. (a) General...

Oak Ridge National Laboratory's (ORNL) Weigh-In-Motion (WIM) Configuration and Data Management Activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abercrombie, Robert K; Sheldon, Frederick T; Schlicher, Bob G

2006-01-01

The Oak Ridge National Laboratory (ORNL) involvement in the Weigh-in-Motion (WIM) research with both government agencies and private companies dates back to 1989. The discussion here will focus on the US Army's current need for an automated WIM system to weigh and determine the center-of-balance for military wheeled vehicles and cargo and the expanded uses of WIM data. ORNL is addressing configuration and data management issues as they relate to deployments for both military and humanitarian activities. The transition from the previous WIM Gen I to the current Gen II system illustrates a configuration and data management solution that ensuresmore » data integration, integrity, coherence and cost effectiveness. Currently, Army units use portable and fixed scales, tape measures, and calculators to determine vehicle axle, total weights and center of balance for vehicles prior to being transshipped via railcar, ship, or airlifted. Manually weighing and measuring all vehicles subject to these transshipment operations is time-consuming, labor-intensive, hazardous and is prone to human errors (e.g., misreading scales and tape measures, calculating centers of balance and wheel, axle, and vehicle weights, recording data, and transferring data from manually prepared work sheets into an electronic data base and aggravated by adverse weather conditions). Additionally, in the context of the military, the timeliness, safety, success, and effectiveness of airborne heavy-drop operations can be significantly improved by the use of an automated system to weigh and determine center of balance of vehicles while they are in motion. The lack of a standardized airlift-weighing system for joint service use also creates redundant weighing requirements at the cost of scarce resources and time. This case study can be judiciously expanded into commercial operations related to safety and enforcement. The WIM program will provide a means for the Army to automatically identify/weigh and monitor vehicle characteristics for real-time storage/dissemination to the TC-AIMS II (Transportation Coordinators' - Automated Information for Movement System II) for load planning and for providing asset visibility. The WIM system was developed using COTs products and the Reach Back (WIM-RBC) capability is based on a Web-services architecture implemented through best practices of software design (UML and XML schema). Fielded systems and XML-compliant messages can engage the WIM-RBC to store all measurement data in the repository accessible to authorized users through standard secure protocols.« less

7 CFR 800.115 - Who may request original services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Who may request original services. 800.115 Section 800... Original Services § 800.115 Who may request original services. (a) General. Any interested person may request original inspection and weighing services. The kinds of inspection and weighing services are...

75 FR 9157 - Proposed Information Collection; Comment Request; Alaska Region Scale and Catch Weighing...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-01

... and catch weighing requirements address performance standards designed to ensure that all catch... motherships is based on the vessel meeting a series of design criteria. Because of the wide variations in factory layout for inshore processors, NMFS requires a performance-based catch monitoring system for...

29 CFR 780.809 - Employees engaged in exempt operations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... subsequently. (c) Weighing the seed cotton prior to ginning, weighing lint cotton and seed subsequent to...

29 CFR 780.809 - Employees engaged in exempt operations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... subsequently. (c) Weighing the seed cotton prior to ginning, weighing lint cotton and seed subsequent to...

29 CFR 780.809 - Employees engaged in exempt operations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... subsequently. (c) Weighing the seed cotton prior to ginning, weighing lint cotton and seed subsequent to...

29 CFR 780.809 - Employees engaged in exempt operations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... subsequently. (c) Weighing the seed cotton prior to ginning, weighing lint cotton and seed subsequent to...

29 CFR 780.809 - Employees engaged in exempt operations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT Employment in Ginning of Cotton and Processing of Sugar Beets, Sugar-Beet Molasses, Sugarcane, or Maple Sap... subsequently. (c) Weighing the seed cotton prior to ginning, weighing lint cotton and seed subsequent to...

7 CFR 800.129 - Certificating reinspection and review of weighing results.

Code of Federal Regulations, 2010 CFR

2010-01-01

... results. 800.129 Section 800.129 Agriculture Regulations of the Department of Agriculture (Continued... Certificating reinspection and review of weighing results. (a) General. Except as provided in paragraph (a)(1.... Except as provided in paragraph (b)(2) of this section, only the result of the reinspection service shall...

7 CFR 800.129 - Certificating reinspection and review of weighing results.

Code of Federal Regulations, 2011 CFR

2011-01-01

... results. 800.129 Section 800.129 Agriculture Regulations of the Department of Agriculture (Continued... Certificating reinspection and review of weighing results. (a) General. Except as provided in paragraph (a)(1.... Except as provided in paragraph (b)(2) of this section, only the result of the reinspection service shall...

Development of Rural Road Bridge Weigh-in-Motion System to Assess Weight and Configuration of Farm-to-Market Vehicles

DOT National Transportation Integrated Search

2018-05-01

The weights and configurations of large vehicles traveling the primary interstate system are known with relative certainty due to the information collected at numerous weigh stations. It is uncommon, however, that farm-to-market vehicles and other im...

40 CFR 98.334 - Monitoring and QA/QC requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 22 2012-07-01 2012-07-01 false Monitoring and QA/QC requirements. 98... (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Zinc Production § 98.334 Monitoring and QA/QC requirements. If..., belt weigh feeders, weighed purchased quantities in shipments or containers, combination of bulk...

40 CFR 98.334 - Monitoring and QA/QC requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 21 2011-07-01 2011-07-01 false Monitoring and QA/QC requirements. 98... (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Zinc Production § 98.334 Monitoring and QA/QC requirements. If..., belt weigh feeders, weighed purchased quantities in shipments or containers, combination of bulk...

40 CFR 98.334 - Monitoring and QA/QC requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 21 2014-07-01 2014-07-01 false Monitoring and QA/QC requirements. 98... (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Zinc Production § 98.334 Monitoring and QA/QC requirements. If..., belt weigh feeders, weighed purchased quantities in shipments or containers, combination of bulk...

40 CFR 98.334 - Monitoring and QA/QC requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 22 2013-07-01 2013-07-01 false Monitoring and QA/QC requirements. 98... (CONTINUED) MANDATORY GREENHOUSE GAS REPORTING Zinc Production § 98.334 Monitoring and QA/QC requirements. If..., belt weigh feeders, weighed purchased quantities in shipments or containers, combination of bulk...

U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--QA ANALYTICAL RESULTS FOR PARTICULATE MATTER IN BLANK SAMPLES

EPA Science Inventory

The Particulate Matter in Blank Samples data set contains the analytical results for measurements of two particle sizes in 12 samples. Filters were pre-weighed, loaded into impactors, kept unexposed in the laboratory, unloaded and post-weighed. Positive weight gains for laborat...

Implementation of advanced fiber optic and piezoelectric sensors : fabrication and laboratory testing of piezoelectric ceramic-polymer composite sensors for weigh-in-motion systems.

DOT National Transportation Integrated Search

1999-02-01

Weigh-in-motion (WIM) systems might soon replace the conventional techniques used to enforce : weight restrictions for large vehicles on highways. Currently WIM systems use a piezoelectric : polymer sensor that produces a voltage proportional to an a...

Developmental Differences in the Relative Weighing of Informants' Social Attributes

ERIC Educational Resources Information Center

Reyes-Jaquez, Bolivar; Echols, Catharine H.

2013-01-01

We examined whether similarity, familiarity, and reliability cues guide children's learning and whether these cues are weighed differently with age. Three- to 5-year-olds (n = 184) met 2 informant puppets, 1 of which was similar (Experiment 1) or familiar (Experiment 2) to the participants. Initially, children's preference for either informant was…

7 CFR 70.15 - Equipment and facilities for graders.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Scales graduated in tenths of a pound or less for weighing carcasses, parts, or products individually in containers up to 100 pounds, and test weights for such scales. (4) Scales graduated in one-pound graduation or less for weighing bulk containers of poultry and test weights for such scales. (b) Furnished...

7 CFR 981.401 - Adjusted kernel weight.

Code of Federal Regulations, 2012 CFR

2012-01-01

... based on the analysis of a 1,000 gram sample taken from a lot of almonds weighing 10,000 pounds with less than 95 percent kernels, and a 1,000 gram sample taken from a lot of almonds weighing 10,000... percent kernels containing the following: Edible kernels, 530 grams; inedible kernels, 120 grams; foreign...

7 CFR 981.401 - Adjusted kernel weight.

Code of Federal Regulations, 2011 CFR

2011-01-01

... based on the analysis of a 1,000 gram sample taken from a lot of almonds weighing 10,000 pounds with less than 95 percent kernels, and a 1,000 gram sample taken from a lot of almonds weighing 10,000... percent kernels containing the following: Edible kernels, 530 grams; inedible kernels, 120 grams; foreign...

7 CFR 981.401 - Adjusted kernel weight.

Code of Federal Regulations, 2013 CFR

2013-01-01

... based on the analysis of a 1,000 gram sample taken from a lot of almonds weighing 10,000 pounds with less than 95 percent kernels, and a 1,000 gram sample taken from a lot of almonds weighing 10,000... percent kernels containing the following: Edible kernels, 530 grams; inedible kernels, 120 grams; foreign...

7 CFR 981.401 - Adjusted kernel weight.

Code of Federal Regulations, 2010 CFR

2010-01-01

... based on the analysis of a 1,000 gram sample taken from a lot of almonds weighing 10,000 pounds with less than 95 percent kernels, and a 1,000 gram sample taken from a lot of almonds weighing 10,000... percent kernels containing the following: Edible kernels, 530 grams; inedible kernels, 120 grams; foreign...

7 CFR 981.401 - Adjusted kernel weight.

Code of Federal Regulations, 2014 CFR

2014-01-01

... based on the analysis of a 1,000 gram sample taken from a lot of almonds weighing 10,000 pounds with less than 95 percent kernels, and a 1,000 gram sample taken from a lot of almonds weighing 10,000... percent kernels containing the following: Edible kernels, 530 grams; inedible kernels, 120 grams; foreign...

40 CFR 86.1339-90 - Particulate filter handling and weighing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Particulate filter handling and... Exhaust Test Procedures § 86.1339-90 Particulate filter handling and weighing. (a) At least 1 hour before the test, place a filter pair in a closed (to eliminate dust contamination) but unsealed (to permit...

40 CFR 86.1339-90 - Particulate filter handling and weighing.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 20 2012-07-01 2012-07-01 false Particulate filter handling and... Exhaust Test Procedures § 86.1339-90 Particulate filter handling and weighing. (a) At least 1 hour before the test, place a filter pair in a closed (to eliminate dust contamination) but unsealed (to permit...

40 CFR 86.139-90 - Particulate filter handling and weighing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Particulate filter handling and... New Otto-Cycle Complete Heavy-Duty Vehicles; Test Procedures § 86.139-90 Particulate filter handling and weighing. (a) At least 8 hours, but not more than 56 hours before the test, place each filter in...

40 CFR 1065.595 - PM sample post-conditioning and total weighing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... sample media (e.g., filters) to the weighing and PM-stabilization environments. (a) Make sure the...). If those specifications are not met, leave the test sample media (e.g., filters) covered until proper.... If you use filters, you may remove them from their cassettes before or after stabilization. We...

40 CFR 1065.595 - PM sample post-conditioning and total weighing.

Code of Federal Regulations, 2013 CFR

2013-07-01

... sample media (e.g., filters) to the weighing and PM-stabilization environments. (a) Make sure the...). If those specifications are not met, leave the test sample media (e.g., filters) covered until proper.... If you use filters, you may remove them from their cassettes before or after stabilization. We...

40 CFR 86.139-90 - Particulate filter handling and weighing.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 18 2011-07-01 2011-07-01 false Particulate filter handling and... New Otto-Cycle Complete Heavy-Duty Vehicles; Test Procedures § 86.139-90 Particulate filter handling and weighing. (a) At least 8 hours, but not more than 56 hours before the test, place each filter in...

40 CFR 1065.595 - PM sample post-conditioning and total weighing.

Code of Federal Regulations, 2011 CFR

2011-07-01

... sample media (e.g., filters) to the weighing and PM-stabilization environments. (a) Make sure the...). If those specifications are not met, leave the test sample media (e.g., filters) covered until proper.... If you use filters, you may remove them from their cassettes before or after stabilization. We...

40 CFR 86.139-90 - Particulate filter handling and weighing.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 19 2012-07-01 2012-07-01 false Particulate filter handling and... New Otto-Cycle Complete Heavy-Duty Vehicles; Test Procedures § 86.139-90 Particulate filter handling and weighing. (a) At least 8 hours, but not more than 56 hours before the test, place each filter in...

40 CFR 86.139-90 - Particulate filter handling and weighing.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 19 2014-07-01 2014-07-01 false Particulate filter handling and... New Otto-Cycle Complete Heavy-Duty Vehicles; Test Procedures § 86.139-90 Particulate filter handling and weighing. (a) At least 8 hours, but not more than 56 hours before the test, place each filter in...

40 CFR 86.1339-90 - Particulate filter handling and weighing.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 20 2013-07-01 2013-07-01 false Particulate filter handling and... Exhaust Test Procedures § 86.1339-90 Particulate filter handling and weighing. (a) At least 1 hour before the test, place a filter pair in a closed (to eliminate dust contamination) but unsealed (to permit...

40 CFR 1065.595 - PM sample post-conditioning and total weighing.

Code of Federal Regulations, 2014 CFR

2014-07-01

... sample media (e.g., filters) to the weighing and PM-stabilization environments. (a) Make sure the...). If those specifications are not met, leave the test sample media (e.g., filters) covered until proper.... If you use filters, you may remove them from their cassettes before or after stabilization. We...

40 CFR 86.139-90 - Particulate filter handling and weighing.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 19 2013-07-01 2013-07-01 false Particulate filter handling and... New Otto-Cycle Complete Heavy-Duty Vehicles; Test Procedures § 86.139-90 Particulate filter handling and weighing. (a) At least 8 hours, but not more than 56 hours before the test, place each filter in...

40 CFR 1065.595 - PM sample post-conditioning and total weighing.

Code of Federal Regulations, 2012 CFR

2012-07-01

... sample media (e.g., filters) to the weighing and PM-stabilization environments. (a) Make sure the...). If those specifications are not met, leave the test sample media (e.g., filters) covered until proper.... If you use filters, you may remove them from their cassettes before or after stabilization. We...

40 CFR 86.1339-90 - Particulate filter handling and weighing.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 19 2011-07-01 2011-07-01 false Particulate filter handling and... Exhaust Test Procedures § 86.1339-90 Particulate filter handling and weighing. (a) At least 1 hour before the test, place a filter pair in a closed (to eliminate dust contamination) but unsealed (to permit...

Prolonged Exercise and Changes in Percent Fat Determinations by Hydrostatic Weighing and Scintillation Counting.

ERIC Educational Resources Information Center

Thomas, Tom R.; And Others

1979-01-01

This study, designed to determine the effect of a prolonged running bout on the measurement of percent fat, produced erroneously low readings. It is suggested that previous exercise and state of hydration of subjects should be controlled prior to percent fat determination by hydrostatic weighing or scintillation counting. (MJB)

46 CFR 160.151-57 - Servicing procedure.

Code of Federal Regulations, 2013 CFR

2013-10-01

... weeks and be checked for leakage by weighing before being installed in a liferaft. An alternative... hydrostatic test under 49 CFR 180.205 must be tested and marked in accordance with that section. (f) At every... the servicing facility to maintain clearance during the test, a person weighing not less than 75 kg...

46 CFR 160.151-57 - Servicing procedure.

Code of Federal Regulations, 2014 CFR

2014-10-01

... weeks and be checked for leakage by weighing before being installed in a liferaft. An alternative... hydrostatic test under 49 CFR 180.205 must be tested and marked in accordance with that section. (f) At every... the servicing facility to maintain clearance during the test, a person weighing not less than 75 kg...

46 CFR 160.151-57 - Servicing procedure.

Code of Federal Regulations, 2012 CFR

2012-10-01

... weeks and be checked for leakage by weighing before being installed in a liferaft. An alternative... hydrostatic test under 49 CFR 180.205 must be tested and marked in accordance with that section. (f) At every... the servicing facility to maintain clearance during the test, a person weighing not less than 75 kg...

Development and evaluation of a dual purpose bridge health monitoring and weigh-in-motion system for a steel girder bridge : phase two.

DOT National Transportation Integrated Search

2016-06-30

The primary objective of this second phase is the further development, demonstration : and field evaluation of a permanent dual purpose bridge weigh-in-motion and health monitoring : system over an extended period of time. Calibrated test truck resul...

78 FR 2627 - Fees for Official Inspection and Official Weighing Services Under the United States Grain...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-14

... compensation and benefits, travel, rent, communications, utilities, contractual services, supplies, and...- contract rate, plus the prevailing Toledo field office tonnage fee, plus the actual cost of travel. GIPSA... weighing services to recover its costs and build an operating reserve. Fees for foreign travel would be...

75 FR 76254 - Official Performance and Procedural Requirements for Grain Weighing Equipment and Related Grain...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-08

... requirements of the 2008 edition of the National Institute of Standards and Technology (NIST) Handbook 44, ``Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices,'' (NIST Handbook... identified as ``NIST Handbook 44 IBF Comments,'' making reference to the date and page number of this issue...

Study on the weighing system based on optical fiber Bragg grating

NASA Astrophysics Data System (ADS)

Wang, Xiaona; Yu, Qingxu; Li, Yefang

2010-10-01

The optical fiber sensor based on wavelength demodulation such as fiber Bragg grating(FBG), with merits of immunity to electromagnetic interference, low drift and high precision, has been widely used in many areas, such as structural health monitoring and smart materials, and the wavelength demodulation system was also studied widely. In the paper, a weighing system based on FBG was studied. The optical source is broadband Erbium-doped fiber ring laser with a spectral range of 1500~1600nm and optical power of 2mW; A Fabry-Perot Etalon with orientation precision of 1pm was adopted as real-time wavelength calibration for the swept laser; and multichannel high resolution simultaneous sampling card was used in the system to acquire sensing signals simultaneously, thus high-resolution and real-time calibration of sweep-wavelength can be achieved. The FBG was adhered to a cantilever beam and the Bragg wavelength was demodulated with the system. The weighing system was done after calibrated with standard weight. Experimental results show that the resolution of the weighing system is 0.5 g with a full scale of 2Kg.

Development of an underwater weighing system for determining body composition.

PubMed

Patterson, P E; Distel, M

1997-01-01

A system was developed to reduce some of the difficulties associated with hydrostatic (underwater) weighing, specifically the need for complete exhalation and the subjective approximation of weighing scale measurements. The exhalation portion of the weighing protocol is particularly difficult for many disabled individuals and has contributed to the lack of available body composition information for this population. The components of our system include a computer system, load cell, spirometer, breathing tube, logic and signal conditioning circuitry specially constructed for this system, and a software package developed for this project. In a preliminary test, the body fat percentages of fourteen subjects (six males and eight females, ages 21-32 years) were determined both with the standard method and with our system. A correlation of r = 0.967 was found between the two methods, with our system's precision ranging from 1.0 to 1.3 body fat percentage points. The system could be used, for example, in developing a database for monitoring an individual's fitness or for making comparisons between groups (such as athlete to non-athlete).

Rapid weight gain in professional boxing and correlation with fight decisions: analysis from 71 title fights.

PubMed

Daniele, Gianlorenzo; Weinstein, Richard N; Wallace, Paul Wesley; Palmieri, Vincenzo; Bianco, Massimiliano

2016-11-01

Boxing is a sport where athletes compete in several weight categories. Professional boxers typically dehydrate to cut their weight for the weigh-in (24 h before the contest) and then rehydrate before the fight. The International Boxing Federation (IBF) mandates a second weigh-in 12 h before the fight. Our objectives were: 1) To quantify the weight gain (WG) from the 1st to the 2nd weigh-in; 2) to investigate whether rapid WG affects boxing performance (win/loss rate) and 3) whether weight discrepancy (WD) 15 between boxers exposes them to increased health risks (rate of fights ended before time limit). From official weigh-in reports of 71 IBF fights (142 fighters) the following data were gathered/calculated for each boxer: age, weight division, 1st weight, 2nd weight, WG between weigh-ins (kg and %), WD between opponents, and fight decision. Between the weigh-ins, the average WG was 2.52 ± 1.37 kg (range -0.3/6.4 kg) and 3.8 ± 2.2% of the initial body weight (range -0.4/9.3%) and the average WD 1.94 ± 1.50 kg (maximum 7.10 kg). Both WG and WD did not affect match outcomes. We observed tendencies for higher loss rate among boxers gaining more weight, and for higher victory rate in boxers with larger WD, however without reaching significance. A significant negative correlation was found between the 1st weight and the WG, both in absolute (r = -0.278, p = 0.001) and relative value (r = -0.497, p < 0.0001). Although correlations between WG, WD and boxing performance were not found, single cases with an alarming high WG and WD were noted.

Using container weights to determine irrigation needs: A simple method

Treesearch

R. Kasten Dumroese; Mark E. Montville; Jeremiah R. Pinto

2015-01-01

Proper irrigation can reduce water use, water waste, and incidence of disease. Knowing when to irrigate plants in container nurseries can be determined by weighing containers. This simple method is quantifiable, which is a benefit when more than one worker is responsible for irrigation. Irrigation is necessary when the container weighs some target as a proportion of...

Angles No Longer Weigh In: The Effect of Geometric Cue Directness on Reorientation

ERIC Educational Resources Information Center

Huang, Zhenzhen; Hu, Qingfen; Shao, Yi

2017-01-01

Previous research in spatial reorientation, which only presented the target location in the corner, has found that adults weighed angles more than wall lengths. We proposed that in previous research, angular cues were available for direct use whereas length cues had to be associated with the left/right sense. We thus investigated whether the…

40 CFR 1065.590 - PM sampling media (e.g., filters) preconditioning and tare weighing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false PM sampling media (e.g., filters... Specified Duty Cycles § 1065.590 PM sampling media (e.g., filters) preconditioning and tare weighing. Before an emission test, take the following steps to prepare PM sampling media (e.g., filters) and equipment...

40 CFR 1065.590 - PM sampling media (e.g., filters) preconditioning and tare weighing.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 34 2012-07-01 2012-07-01 false PM sampling media (e.g., filters... Specified Duty Cycles § 1065.590 PM sampling media (e.g., filters) preconditioning and tare weighing. Before an emission test, take the following steps to prepare PM sampling media (e.g., filters) and equipment...

40 CFR 1065.590 - PM sampling media (e.g., filters) preconditioning and tare weighing.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 34 2013-07-01 2013-07-01 false PM sampling media (e.g., filters... Specified Duty Cycles § 1065.590 PM sampling media (e.g., filters) preconditioning and tare weighing. Before an emission test, take the following steps to prepare PM sampling media (e.g., filters) and equipment...

40 CFR 1065.590 - PM sampling media (e.g., filters) preconditioning and tare weighing.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 33 2011-07-01 2011-07-01 false PM sampling media (e.g., filters... Specified Duty Cycles § 1065.590 PM sampling media (e.g., filters) preconditioning and tare weighing. Before an emission test, take the following steps to prepare PM sampling media (e.g., filters) and equipment...

40 CFR 1065.590 - PM sampling media (e.g., filters) preconditioning and tare weighing.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 33 2014-07-01 2014-07-01 false PM sampling media (e.g., filters... Specified Duty Cycles § 1065.590 PM sampling media (e.g., filters) preconditioning and tare weighing. Before an emission test, take the following steps to prepare PM sampling media (e.g., filters) and equipment...

A Dual-Range Strain Gage Weighing Transducer Employing Automatic Switching

Treesearch

Rodger A. Arola

1968-01-01

Describes a dual-range strain gage transducer which has proven to be an excellent weight-sensing device for weighing trees and tree-length logs; discusses basic principals of the design and operation; and shows that a single transducer having two sensitivity ranges with automatic internal switching can sense weight with good repeatability and that one calibration curve...

76 FR 45397 - Export Inspection and Weighing Waiver for High Quality Specialty Grain Transported in Containers

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-29

... compared to an average $0.34 per metric ton for traditional grain exports. On December 13, 2005, GIPSA... mandatory inspection and weighing requirements of the USGSA that would adversely affect the marketing system... established the waiver to facilitate the marketing of high quality specialty grain by eliminating the burden...

49 CFR 375.509 - How must I determine the weight of a shipment?

Code of Federal Regulations, 2010 CFR

2010-10-01

...—origin weigh. You determine the difference between the tare weight of the vehicle before loading at the origin of the shipment and the gross weight of the same vehicle after loading the shipment. (2) Second method—back weigh. You determine the difference between the gross weight of the vehicle with the shipment...

NHEXAS PHASE I ARIZONA STUDY--STANDARD OPERATING PROCEDURE FOR FILTER WEIGHING (UA-L-9.1)

EPA Science Inventory

The purpose of this SOP is to describe the procedures to be followed in determining the pre- and post-exposure weight of 37mm and 25mm Teflon filters, Teflon sentinel filters and Teflon vacuum dust filters. This procedure applies to the pre- and post-exposure weighing of the fil...

40 CFR 122.42 - Additional conditions applicable to specified categories of NPDES permits (applicable to State...

Code of Federal Regulations, 2014 CFR

2014-07-01

...; (vii) Identify protocols for appropriate testing of manure, litter, process wastewater, and soil; (viii... under roof (beef cattle, broilers, layers, swine weighing 55 pounds or more, swine weighing less than 55... paragraph (e)(5)(ii) of this section, the results of any soil testing for nitrogen and phosphorus taken...

40 CFR 122.42 - Additional conditions applicable to specified categories of NPDES permits (applicable to State...

Code of Federal Regulations, 2013 CFR

2013-07-01

...; (vii) Identify protocols for appropriate testing of manure, litter, process wastewater, and soil; (viii... under roof (beef cattle, broilers, layers, swine weighing 55 pounds or more, swine weighing less than 55... paragraph (e)(5)(ii) of this section, the results of any soil testing for nitrogen and phosphorus taken...

40 CFR 122.42 - Additional conditions applicable to specified categories of NPDES permits (applicable to State...

Code of Federal Regulations, 2012 CFR

2012-07-01

...; (vii) Identify protocols for appropriate testing of manure, litter, process wastewater, and soil; (viii... under roof (beef cattle, broilers, layers, swine weighing 55 pounds or more, swine weighing less than 55... paragraph (e)(5)(ii) of this section, the results of any soil testing for nitrogen and phosphorus taken...

In situ sensors, weighing lysimeters and COSMOS under vegetated and bare conditions with subsurface drip irrigation

USDA-ARS?s Scientific Manuscript database

Long term weighing lysimeter records may have utility for assessment of climate changes occurring during the period of record. They typically enclose a depth of soil that exceeds the root zone of vegetation normally grown on them and have drainagy systems so that more or less natural hydrologic flux...

Dynamic global model of oxide Czochralski process with weighing control

NASA Astrophysics Data System (ADS)

Mamedov, V. M.; Vasiliev, M. G.; Yuferev, V. S.

2011-03-01

A dynamic model of oxide Czochralski growth with weighing control has been developed for the first time. A time-dependent approach is used for the calculation of temperature fields in different parts of a crystallization set-up and convection patterns in a melt, while internal radiation in crystal is considered in a quasi-steady approximation. A special algorithm is developed for the calculation of displacement of a triple point and simulation of a crystal surface formation. To calculate variations in the heat generation, a model of weighing control with a commonly used PID regulator is applied. As an example, simulation of the growth process of gallium-gadolinium garnet (GGG) crystals starting from the stage of seeding is performed.

Gravimetric system using high-speed double switching valves for low liquid flow rates

NASA Astrophysics Data System (ADS)

Cheong, Kar-Hooi; Doihara, Ryouji; Shimada, Takashi; Terao, Yoshiya

2018-07-01

This paper presents a gravimetric system developed to perform the static weighing with flying-start-and-stop (SW-FSS) calibration method at low liquid flow rates using a pair of identical high-speed switching valves as a flow diverter. Features of the gravimetric system comprise three main components: a pair of switching valves that divert the working liquid between two symmetrical flow paths; a weighing vessel equipped with an overflow inner vessel and enclosed in a weighing chamber; and a liquid discharge mechanism comprising a discharge tube and a discharge pump, used with a multi-purpose bin. These are described with an explanation of the design considerations behind each feature. The overflow inner vessel is designed with a notch in its wall and is positioned so that it does not come into contact with the liquid surface of the accumulated liquid in the weighing vessel or the side wall of the weighing vessel to obtain a good repeatability of the interactive effects between the feeding tube and the submerging working liquid, thus ensuring a correct mass reading of the liquid collection. A performance test showed that, in terms of contribution to the overall uncertainty of the standard flow rate, the pair of switching valves is capable of performing SW-FSS satisfactorily with small relative timing errors within %. However, the mass loss due to evaporation is considered a major source of error of the gravimetric system, showing a maximum error of 0.011% under the most evaporative condition tested for the longest liquid collection time of the gravimetric system.

Individualised dietary strategies for Olympic combat sports: Acute weight loss, recovery and competition nutrition.

PubMed

Reale, Reid; Slater, Gary; Burke, Louise M

2017-07-01

Olympic combat sports separate athletes into weight divisions, in an attempt to reduce size, strength, range and/or leverage disparities between competitors. Official weigh-ins are conducted anywhere from 3 and up to 24 h prior to competition ensuring athletes meet weight requirements (i.e. have 'made weight'). Fighters commonly aim to compete in weight divisions lower than their day-to-day weight, achieved via chronic and acute manipulations of body mass (BM). Although these manipulations may impair health and absolute performance, their strategic use can improve competitive success. Key considerations are the acute manipulations around weigh-in, which differ in importance, magnitude and methods depending on the requirements of the individual combat sport and the weigh-in regulations. In particular, the time available for recovery following weigh-in/before competition will determine what degree of acute BM loss can be implemented and reversed. Increased exercise and restricted food and fluid intake are undertaken to decrease body water and gut contents reducing BM. When taken to the extreme, severe weight-making practices can be hazardous, and efforts have been made to reduce their prevalence. Indeed some have called for the abolition of these practices altogether. In lieu of adequate strategies to achieve this, and the pragmatic recognition of the likely continuation of these practices as long as regulations allow, this review summarises guidelines for athletes and coaches for manipulating BM and optimising post weigh-in recovery, to achieve better health and performance outcomes across the different Olympic combat sports.

Poka-yoke process controller: designed for individuals with cognitive impairments.

PubMed

Erlandson, R F; Sant, D

1998-01-01

Poka-yoke is a Japanese term meaning "error proofing." Poka-yoke techniques were developed to achieve zero defects in manufacturing and assembly processes. The application of these techniques tends to reduce both the physical and cognitive demands of tasks and thereby make them more accessible. Poka-yoke interventions create a dialogue between the worker and the process, and this dialogue provides the feedback necessary for workers to prevent errors. For individuals with cognitive impairments, weighing and counting tasks can be difficult or impossible. Interventions that provide sufficient feedback to workers without disabilities tend to be too subtle for workers with cognitive impairments; hence, the feedback must be enhanced. The Poka-Yoke Controller (PYC) was designed to assist individuals with counting and weighing tasks. The PYC interfaces to an Ohaus CT6000 digital scale for weighing parts and for counting parts by weight. It also interfaces to sensors and switches for object counting tasks. The PYC interfaces to a variety of programmable voice output devices so that voice feedback or prompting can be provided at specific points in the weighing or counting process. The PYC can also be interfaced to conveyor systems, indexed turntables, and other material handling systems for coordinated counting and material handling operations. In all of our applications to date, we have observed improved worker performance, improved process quality, and greater worker independence. These observed benefits have also significantly reduced the need for staff intervention. The process controller is described and three applications are presented: a weighing task and two counting applications.

Province-based study of neurologic disability among survivors weighing 500 through 1249 grams at birth.

PubMed

Robertson, C; Sauve, R S; Christianson, H E

1994-04-01

As the mortality of children weighing 500 through 1249 g at birth decreases, the published rates of neurologic disability among survivors have caused concern. Outcome information from a province-based study in which perinatal/neonatal regional care is well developed and includes high-risk identification, early referral, organized transport, and outreach education, provides data from a Canadian source for comparison with epidemiologic reports. Neurologic disability rates among 2- to 3-year-old survivors weighing 500 through 1249 g at birth is provided based on all live births/neonatal survivors/1-year survivors born in Alberta, Canada to Alberta residents in 1990. Corrected survival to 1-year was 163 of 229 or 71% of live births of the total group weighing 500 through 1249 g. Of 168 live births, 143 or 85% weighing 750 through 1249 g, free from lethal anomalies, survived. Based on 1-year survival, disability rates were: cerebral palsy, 67/1000; vision loss (acuity in the best seeing eye after correction, < 20/60), 12/1000; neurosensory hearing loss (loss of > or = 30 dB binaurally), 12/1000; and trainable/profound mental retardation, 18/1000. No survivor had a convulsive disorder. No vision loss or mental retardation as defined by this study occurred in survivors of > or = 750 g. All children with cerebral palsy were or were projected to become ambulatory. Neurologic disability among small preterm surviving infants can occur less frequently than suggested by published reports. We believe this provincial study supports the value of well developed regional perinatal programs.

U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--STANDARD OPERATING PROCEDURE FOR FILTER WEIGHING (UA-L-9.1)

EPA Science Inventory

The purpose of this SOP is to describe the procedures to be followed in determining the pre- and post-exposure weight of 37mm and 25mm Teflon filters, Teflon sentinel filters and Teflon vacuum dust filters. This procedure applies to the pre- and post-exposure weighing of the fil...

Characterization and Air Drying of Chunkwood and Chips

Treesearch

Joseph B. Sturos

1984-01-01

Chunkwood was found to be composed of a few large particles and many small particles with the large particles constituting almost half the total weight. More than 75 percent of the chunk weight was composed of particles weighing more than 100 grams (ovendry), while 85 percent of the chip weight was composed of particles weighing 3 grams or less. Energy densities...

78 FR 57790 - Adoption of Statutory Prohibition on the Operation of Jets Weighing 75,000 Pounds or Less That...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-20

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 91 [Docket No. FAA-2013-0503; Amdt. No. 91-328] RIN 2120-AK25 Adoption of Statutory Prohibition on the Operation of Jets Weighing 75,000 Pounds or Less That Are Not Stage 3 Noise Compliant AGENCY: Federal Aviation Administration...

49 CFR 375.521 - What must I do if an individual shipper wants to know the actual weight or charges for a shipment...

Code of Federal Regulations, 2010 CFR

2010-10-01

... transmissions; e-mail; overnight courier; or certified mail, return receipt requested. (b) The individual... transported on a collect-on-delivery basis specifically requests notification of the actual weight or volume... weighed (i.e., weighed at destination). (2) Pickup and delivery encompass two consecutive weekdays, if the...

49 CFR Appendix D to Part 173 - Test Methods for Dynamite (Explosive, Blasting, Type A)

Code of Federal Regulations, 2011 CFR

2011-10-01

... weighed to determine the percent of weight loss. 3. Test method D-3—Compression Exudation Test The entire... from the glass tube and weighed to determine the percent of weight loss. EC02MR91.067 ... assembly is placed under the compression rod, and compression is applied by means of the weight on the...

7 CFR 800.153 - Maintenance and retention of records on official inspection, Class X or Class Y weighing, and...

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 7 2011-01-01 2011-01-01 false Maintenance and retention of records on official inspection, Class X or Class Y weighing, and equipment testing service. 800.153 Section 800.153 Agriculture... and Forms (general) § 800.153 Maintenance and retention of records on official inspection, Class X or...

7 CFR 800.153 - Maintenance and retention of records on official inspection, Class X or Class Y weighing, and...

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 7 2013-01-01 2013-01-01 false Maintenance and retention of records on official inspection, Class X or Class Y weighing, and equipment testing service. 800.153 Section 800.153 Agriculture... and Forms (general) § 800.153 Maintenance and retention of records on official inspection, Class X or...

7 CFR 800.153 - Maintenance and retention of records on official inspection, Class X or Class Y weighing, and...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 7 2014-01-01 2014-01-01 false Maintenance and retention of records on official inspection, Class X or Class Y weighing, and equipment testing service. 800.153 Section 800.153 Agriculture... and Forms (general) § 800.153 Maintenance and retention of records on official inspection, Class X or...

7 CFR 800.153 - Maintenance and retention of records on official inspection, Class X or Class Y weighing, and...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Maintenance and retention of records on official inspection, Class X or Class Y weighing, and equipment testing service. 800.153 Section 800.153 Agriculture... and Forms (general) § 800.153 Maintenance and retention of records on official inspection, Class X or...

7 CFR 800.153 - Maintenance and retention of records on official inspection, Class X or Class Y weighing, and...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 7 2012-01-01 2012-01-01 false Maintenance and retention of records on official inspection, Class X or Class Y weighing, and equipment testing service. 800.153 Section 800.153 Agriculture... and Forms (general) § 800.153 Maintenance and retention of records on official inspection, Class X or...

Can weighing lysimeter ET represent surrounding field ET well enough to test flux station measurements of daily and sub-daily ET?

USDA-ARS?s Scientific Manuscript database

Weighing lysimeters and neutron probes are two tools used to determine the change in soil water storage that is needed to solve for evapotranspiration (ET) using the soil water balance equation. Errors in the soil water balance due to errors in determination of precipitation and irrigation are commo...

Exploration of a variation of the bottle buoyancy technique for the assessment of body composition.

PubMed

Gulick, Dawn T; Geigle, Paula Richley

2003-05-01

Hydrostatic weighing has long been recognized as a reliable and valid method for the assessment of body composition. An alternative method known as bottle buoyancy (BB) was introduced by Katch, Hortobagyi, and Denahan in 1989. The purpose of this clinical investigation was to determine the accuracy of the BB technique using an 11-L container. Sixteen individuals (8 men, 8 women) were weighed hydrostatically using a chair/scale and the BB technique. The overall intraclass correlation coefficient for the two techniques was 0.9537. A 2-variable ANOVA was significant for gender but not for technique, and there was no interaction between variables. Thus, the BB technique appears to be an accurate substitute for the chair/scale technique for hydrostatic weighing. The BB method does not involve elaborate equipment and is portable. It could be improved with the use of multiple bottles of various volumes or a calibrated bottle to minimize the number of trials needed for accurate measurements. BB is a valuable, simple clinical tool for assessing body composition based on the principles of hydrostatic weighing and can be performed in any high school, college, or community swimming pool.

Investigation of a Hydrostatic Weighing Method for a 1 kg Mass Comparator

NASA Astrophysics Data System (ADS)

Probst, R.; Kochsiek, M.

1984-01-01

A mass comparator for the comparison of 1 kg weights was built according to a hydrostatic weighing principle, where the buoyancy in a liquid serves to compensate the force due to gravity. In accordance with the method known for hydrometers or areometers, the immersion depth of a float is measured as a function of the force due to gravity, using a laser interferometer. The substitution principle can thus be quite simply realized at constant load. An essential advantage of this weighing method compared with the mechanical beam balance results from the frictionless and vibration-resistant bearing of the float in the liquid. For achieving a high accuracy with this technique, two prerequisites were important: the reduction of the influence of temperature by adapting the coefficients of expansion of buoyant body and liquid to each other, and the improvement of the wetting property of the liquid by adding a surfactant. The accuracy was further improved by the use of an electromagnetic feedback control to keep the immersion depth constant. By this method, a relative standard deviation of the weighings of better than 5 × 10-9 could be achieved.

5. Credit BG. This interior view shows the weigh room, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Credit BG. This interior view shows the weigh room, looking west (240°): Electric lighting and scale read-outs (boxes with circular windows on the wall) are fitted with explosion-proof enclosures; these enclosures prevent malfunctioning electrical parts from sparking and starting fires or explosions. One marble table and scale have been removed at the extreme left of the view. Two remaining scales handle small and large quantities of propellants and additives. Marble tables do not absorb chemicals or conduct electricity; their mass also prevents vibration from upsetting the scales. The floor has an electrically conductive coating to dissipate static electric charges, thus preventing sparks which might ignite propellants. - Jet Propulsion Laboratory Edwards Facility, Weigh & Control Building, Edwards Air Force Base, Boron, Kern County, CA

SMAP During Weighing

NASA Image and Video Library

2014-11-07

Operations are underway to weigh NASA's Soil Moisture Active Passive, or SMAP, spacecraft in the clean room of the Astrotech payload processing facility on Vandenberg Air Force Base in California. The weighing of a spacecraft is standard procedure during prelaunch processing. SMAP will launch on a Delta II 7320 configuration vehicle featuring a United Launch Alliance first stage booster powered by an Aerojet Rocketdyne RS-27A main engine and three Alliant Techsystems, or ATK, strap-on solid rocket motors. Once on station in Earth orbit, SMAP will provide global measurements of soil moisture and its freeze/thaw state. NASA's Jet Propulsion Laboratory that built the observatory and its radar instrument also is responsible for SMAP project management and mission operations. Launch from Space Launch Complex 2 is targeted for Jan. 29, 2015.

SMAP During Weighing

NASA Image and Video Library

2014-11-07

Preparations are underway to weigh NASA's Soil Moisture Active Passive, or SMAP, spacecraft in the clean room of the Astrotech payload processing facility on Vandenberg Air Force Base in California. The weighing of a spacecraft is standard procedure during prelaunch processing. SMAP will launch on a Delta II 7320 configuration vehicle featuring a United Launch Alliance first stage booster powered by an Aerojet Rocketdyne RS-27A main engine and three Alliant Techsystems, or ATK, strap-on solid rocket motors. Once on station in Earth orbit, SMAP will provide global measurements of soil moisture and its freeze/thaw state. NASA's Jet Propulsion Laboratory that built the observatory and its radar instrument also is responsible for SMAP project management and mission operations. Launch from Space Launch Complex 2 is targeted for Jan. 29, 2015.

Method and appartus for converting static in-ground vehicle scales into weigh-in-motion systems

DOEpatents

Muhs, Jeffrey D.; Scudiere, Matthew B.; Jordan, John K.

2002-01-01

An apparatus and method for converting in-ground static weighing scales for vehicles to weigh-in-motion systems. The apparatus upon conversion includes the existing in-ground static scale, peripheral switches and an electronic module for automatic computation of the weight. By monitoring the velocity, tire position, axle spacing, and real time output from existing static scales as a vehicle drives over the scales, the system determines when an axle of a vehicle is on the scale at a given time, monitors the combined weight output from any given axle combination on the scale(s) at any given time, and from these measurements automatically computes the weight of each individual axle and gross vehicle weight by an integration, integration approximation, and/or signal averaging technique.

Effectiveness of female community health volunteers in the detection and management of low-birth-weight in Nepal.

PubMed

Amano, S; Shrestha, B P; Chaube, S S; Higuchi, M; Manandhar, D S; Osrin, D; Costello, A; Saville, N

2014-01-01

Low birth weight (LBW) is a major risk factor for neonatal death. However, most neonates in low-income countries are not weighed at birth. This results in many LBW infants being overlooked. Female community health volunteers (FCHVs) in Nepal are non-health professionals who are living in local communities and have already worked in a field of reproductive and child health under the government of Nepal for more than 20 years. The effectiveness of involving FCHVs to detect LBW infants and to initiate prompt action for their care was studied in rural areas of Nepal. FCHVs were tasked with weighing all neonates born in selected areas using color-coded spring scales. Supervisors repeated each weighing using electronic scales as the gold standard comparator. Data on the relative birth sizes of the infants, as assessed by their mothers, were also collected and compared with the measured weights. Each of the 205 FCHVs involved in the study was asked about the steps that she would take when she came across a LBW infant, and knowledge of zeroing a spring scale was also assessed through individual interviews. The effect of the background social characteristics of the FCHVs on their performance was examined by logistic regression. This study was nested within a community-based neonatal sepsis-management intervention surveillance system, which facilitated an assessment of the performance of the FCHVs in weighing neonates, coverage of FCHVs' visits, and weighing of babies through maternal interviews. A total of 462 babies were weighed, using both spring scales and electronic scales, within 72 hours of birth. The prevalence of LBW, as assessed by the gold standard method, was 28%. The sensitivity of detection of LBW by FCHVs was 89%, whereas the sensitivity of the mothers' perception of size at birth was only 40%. Of the 205 FCHVs participating in the study, 70% of FCHVs understood what they should do when they identified LBW and very low birth weight (VLBW) infants. Ninety-six per cent could describe how to zero a scale and approximately 50% could do it correctly. Seventy-seven per cent of FCHVs weighed infants at least once during the study period, and 19 of them (12%) miscategorized infant weights. Differences were not detected between the background social characteristics of FCHVs who miscategorized infants and those who did not. On the basis of maternal reporting, 67% of FCHVs who visited infants had weighed them. FCHVs are able to correctly identify LBW and VLBW infants using spring scales and describe the correct steps to take after identification of these infants. Use of FCHVs as newborn care providers allows for utilization of their logistical, geographical, and cultural strengths, particularly a high level of access to neonates, that can complement the Nepalese healthcare system. Providing additional training to and increasing supervision of local FCHVs regarding birth weight measurement will increase the identification of high-risk neonates in resource-limited settings.

75 FR 56485 - Groundfish Fisheries of the Exclusive Economic Zone Off Alaska; Bering Sea/Aleutian Islands Crab...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-16

... catcher/processors to weigh all offloaded crab on a state-approved scale that produces a printed record... designated port and weigh that product on a scale approved by the state in which the crab is removed from the... the vessel and to attach a scale printout showing gross product offload weight. The weight reported on...

Seed weight - seedling size correlation in coastal Douglas-fir: genetic and environmental components.

Treesearch

Frank C. Sorensen; Robert K. Campbell

1992-01-01

The effect of seed weight on nursery seedling height was analyzed in two experiments. In expt. 1, 16 seeds per family from 111 families were individually weighed and sown in autumn. In expt. 2, a second group of 16 seeds were individually weighed and stratified and sown in spring. Four-tree noncontiguous family plots were randomly assigned to two densities in two...

Determination of mercurous chloride and total mercury in mercury ores

USGS Publications Warehouse

Fahey, J.J.

1937-01-01

A method for the determination of mercurous chloride and total mercury on the same sample is described. The mercury minerals are volatilized in a glass tube and brought into intimate contact with granulated sodium carbonate. The chlorine is fixed as sodium chloride, determined with silver nitrate, and computed to mercurous chloride. The mercury is collected on a previously weighed gold coil and weighed.

Early Development of the Low SES Infant Weighing Less Than 1001 Grams at Birth.

ERIC Educational Resources Information Center

Finello, Karen M.; And Others

To evaluate outcomes in infants of very low birth weight born in 1982-83 to families of extremely low socioeconomic status (SES), 33 infants who weighed less than 1001 grams at birth and survived the nursery period were followed for 1 year. The sample was 79 percent Hispanic and 58 percent female. Mean birth weight was 868 grams and mean…

The Dario Bacas Goniobarimeter: Building a Balance Based on Properties of the Cycloid

ERIC Educational Resources Information Center

Pantin, Javier del Rey; de Zarate, Jose M. Ortiz

2010-01-01

In this article we describe and build a model of a historical weighing device proposed by the Spanish engineer Dario Bacas in the second half of the 19th century. The balance was named "goniobarimeter" by its inventor, and the weighing principle is based on a curious, and not very well known, property of the cycloid. The simplicity of the design…

Neonatal outcomes following extensive cardiopulmonary resuscitation in the delivery room for infants born at less than 33 weeks gestational age.

PubMed

Soraisham, Amuchou Singh; Lodha, Abhay Kumar; Singhal, Nalini; Aziz, Khalid; Yang, Junmin; Lee, Shoo K; Shah, Prakesh S

2014-02-01

To examine the neonatal mortality and morbidity of infants born at <33 weeks gestational age (GA) who received extensive delivery room cardiopulmonary resuscitation (DR-CPR) immediately after birth. In this retrospective cohort study, we performed secondary analyses of data from infants born at <33 weeks GA and admitted to participating NICUs in the Canadian Neonatal Network between January 2010 and December 2011. Infants were divided into two groups based on birth weight (<1000 g and ≥1000 g) and neonatal morbidity and mortality compared using bivariate and multivariate analyses. Of the 8033 eligible infants, 419 (5.2%) received DR-CPR. For infants weighing <1000 g at birth, 10.9% (outborn: 21.6%, inborn: 7.6%) received DR-CPR, whereas 3.4% (outborn: 9.6%, inborn: 2.2%) of those weighing ≥1000 g received DR-CPR. If infants received DR-CPR there was increased risk of mortality, bronchopulmonary dysplasia (BPD) and severe brain injury. Logistic regression analysis showed DR-CPR was associated with increased mortality (adjusted odds ratio [aOR]: 2.09, 95% CI [1.39, 3.14]) in infants born weighing <1000 g. Among infants born weighing ≥1000 g, DR-CPR was associated with increased mortality (aOR: 7.16, 95% CI [3.88, 13.2]), severe brain injury (aOR: 3.08, 95% CI [1.82, 5.22]), BPD (aOR: 2.14, 95% CI [1.25, 3.65]), pneumothorax (aOR: 3.11, 95% CI [1.53, 6.31]) and intestinal perforation (aOR: 3.47, 95% CI [1.46, 8.24]). DR-CPR is associated with increased risk of mortality and morbidity especially in preterm infants born weighing ≥1000 g. Long-term neurodevelopmental follow up is warranted for these infants.

Water sorption and solubility of different calcium hydroxide cements.

PubMed

Francisconi, Luciana Fávaro; de Freitas, Anderson Pinheiro; Scaffa, Polliana Mendes Candia; Mondelli, Rafael Francisco Lia; Francisconi, Paulo Afonso Silveira

2009-01-01

Calcium hydroxide cements have been largely used in deep cavities due to their abilities to stimulate dentin formation. However, their resistance can be relatively low and their solubility relatively high, in many instances. This study evaluated water sorption and solubility of different calcium hydroxide cements, in order to show alterations that may reduce their effectiveness. Five discs (20 mm in diameter and 1.5 mm thick) of three different materials (Biocal, Dycal and Hidro C) were prepared with the aid of a ring-shaped metallic matrix. After being stored at 37 degrees C for 24 h, the discs were weighed on a precision weight scale, dehydrated and weighed again. Immediately after weighing, discs were stored for a week in 50 mL of distilled water at 37 degrees C and, then, weighed again, dehydrated and submitted to a new weighing. The loss of soluble material and its water sorption was obtained from the difference between the initial and the final dry mass of each disc, after 1 week of immersion in water. Data were analyzed for significant differences by two-way ANOVA and Tukey's test (p<0.05). Mean water sorption values (g) +/- standard deviation and percentage (%), for each evaluated cement, were: Biocal (0.006 +/- 0.001 / 2.15); Dycal (0.016 +/- 0.004 / 5.49); and Hidro C (0.025 +/- 0.003 / 8.27). Mean solubility values (g) +/- standard deviation and percentage (%), for each evaluated cement, were: Biocal (0.002 +/- 0.001 / 0.72); Dycal (0.013 +/- 0.004 / 4.21); and Hidro C (0.023 +/- 0.004 / 7.65). Biocal absorbed less water and was less soluble than the other evaluated cements; Hidro C exhibited the highest water sorption and solubility values; and there were significant differences among all evaluated experimental groups.

Validity of body composition assessment methods for older men with cardiac disease.

PubMed

Young, H; Porcari, J; Terry, L; Brice, G

1998-01-01

This study was designed to determine which of several body composition assessment methods was most accurate for patients with cardiac disease for the purpose of outcome measurement. Six body composition assessment methods were administered to each of 24 men with cardiac disease. Methods included circumference measurement, skinfold measurement, near-infrared interactance via the Futrex-5000, bioelectrical impedance via the BioAnalogics ElectroLipoGraph and Tanita TBF-150, and hydrostatic weighing, the criterion measure. A repeated measures analysis of variance indicated no significant (P > .05) difference between circumference and skinfold measurements compared to hydrostatic weighing. Near-infrared interactance presented the best standard error of estimates (3.5%) and the best correlation (r = .84) with hydrostatic weighing; however, the constant error was 3.76%. Bioelectrical impedance measured by the ElectroLipoGraph and TBF-150 instruments significantly underestimated percent body fat by 8.81% and 4.8%, respectively. In this study of middle-aged to older men with cardiac disease, the best method for determining body fat was circumferences. This technique was accurate, easy to administer, inexpensive, and had a lower error potential than the other techniques. Skinfold measurements were also closely related to hydrostatic weighing, but should be performed only by experienced practitioners because there is a greater potential for tester error in certain patients. In the future, near-infrared interactance measurements may be a viable technique for body composition assessment in patients with cardiac disease. However, algorithms specific to the population of patients with cardiac disease being tested must be developed before this technique can be routinely recommended for body composition assessment. Bioelectrical impedance assessment by either method is not recommended for patients with cardiac disease, as it consistently underestimated percent body fat when compared to hydrostatic weighing in this population.

Perinatal mortality in second- vs firstborn twins: a matter of birth size or birth order?

PubMed

Luo, Zhong-Cheng; Ouyang, Fengxiu; Zhang, Jun; Klebanoff, Mark

2014-08-01

Second-born twins on average weigh less than first-born twins and have been reported at an elevated risk of perinatal mortality. Whether the risk differences depend on their relative birth size is unknown. The present study aimed to evaluate the association of birth order with perinatal mortality by birth order-specific weight difference in twin pregnancies. In a retrospective cohort study of 258,800 twin pregnancies without reported congenital anomalies using the US matched multiple birth data 1995-2000 (the available largest multiple birth dataset), conditional logistic regression was applied to estimate the odds ratio (OR) of perinatal death adjusted for fetus-specific characteristics (sex, presentation, and birthweight for gestational age). Comparing second vs first twins, the risks of perinatal death were similar if they had similar birthweights (within 5%) and were increasingly higher if second twins weighed progressively less (adjusted ORs were 1.37, 1.90, and 3.94 if weighed 5.0-14.9%, 15.0-24.9%, and ≥25.0% less, respectively), and progressively lower if they weighed increasingly more (adjusted ORs were 0.67, 0.63, and 0.36 if weighed 5.0-14.9%, 15.0-24.9%, and ≥25.0% more, respectively) (all P < .001). The perinatal mortality rates were not significantly different in cesarean deliveries or preterm (<37 weeks) vaginal deliveries but were significantly higher in second twins in term vaginal deliveries (3.1 vs 1.8 per 1000; adjusted OR, 2.15; P < .001). Perinatal mortality risk differences in second vs first twins depend on their relative birth size. Vaginal delivery at term is associated with a substantially greater risk of perinatal mortality in second twins. Copyright © 2014 Mosby, Inc. All rights reserved.

1. Credit BG. The southwest and southeast sides of Weigh ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Credit BG. The southwest and southeast sides of Weigh & Control appear as the camera looks due north (0°). Barricades on the northwest and northeast sides protect this structure from effects of any explosions at the Mixer Building (4233/E34), Oxidizer Grinder Building (4235/E-36) or other nearby propellant processing structures. The proliferation of doors is because many of the rooms have no interior interconnection--a safeguard to contain and prevent the internal spread of fires or explosions. Signs are posted on the doors describing maximum allowable propellant weights and number of personnel in rooms. A safety shower is featured on the southern exterior corner of the building. Apparatus on the roof consists of air conditioning ducts and fume vents. - Jet Propulsion Laboratory Edwards Facility, Weigh & Control Building, Edwards Air Force Base, Boron, Kern County, CA

6. Credit WCT. Original 21" x 2Y" color negative is ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. Credit WCT. Original 2-1" x 2-Y" color negative is housed in the JPL Photography Laboratory, Pasadena, California. JPL staff members Harold Anderson and John Morrow weigh out small amounts of an undetermined substance according to a solid propellant formula (JPL negative no. JPL-10277AC, 27 January 1989). - Jet Propulsion Laboratory Edwards Facility, Weigh & Control Building, Edwards Air Force Base, Boron, Kern County, CA

JPRS Report, West Europe

DTIC Science & Technology

1987-06-05

Economy Through 1989 (Jan Magnus Fahlstrom; DAGENS NYHETER, 9 Apr 87) 98 SOCIAL SWEDEN Lapps Weigh Emigration Following Chernobyl Devastation...after Chernobyl the Soviet state is a bogeyman for the rest of the world—in human terms, economically and in the area of envir- onmental technology...election year." 11798 , CS0: 3650/102 99 „«„■P»T SWEDEN SOCIAL LAPPS WEIGH EMIGRATION FOLLOWING CHERNOBYL DEVASTATION Stockholm DAGENS NYHETER

Anticancer Agents Based on a New Class of Transition- State Analog Inhibitors for Serine and Cysteine Proteases

DTIC Science & Technology

1999-08-01

electrostatic repulsion between the het- eroatom and the ketone. Swain and Lupton31 have constructed a modified Hammett equation (eq 2) in which they...determined by nonlinear fit to the Michaelis-Menten equation for competitive inhibition using simple weighing. Competitive inhibition was confirmed... equation for competitive inhibition using simple weighing. Competitive inhibition was confirmed by Lineweaver - Burk analysis using simple

Reduced nursing frequency during prolonged lactation in the mouse decreases milk production and increases mammary expression of tryptophan hydroxylase 1 (TPH1), but does not accelerate mammary gland remodeling

USDA-ARS?s Scientific Manuscript database

We have observed that lactating mouse dams nursed 4 times per day (4X) maintained lactation, but had lower milk yields by the weigh-suckle-weigh method, than dams nursed ad libitum (AL). Therefore, we hypothesized that decreased nursing frequency would also decrease lactation persistence, increase m...

A Practical Probabilistic Graphical Modeling Tool for Weighing ...

EPA Pesticide Factsheets

Past weight-of-evidence frameworks for adverse ecological effects have provided soft-scoring procedures for judgments based on the quality and measured attributes of evidence. Here, we provide a flexible probabilistic structure for weighing and integrating lines of evidence for ecological risk determinations. Probabilistic approaches can provide both a quantitative weighing of lines of evidence and methods for evaluating risk and uncertainty. The current modeling structure wasdeveloped for propagating uncertainties in measured endpoints and their influence on the plausibility of adverse effects. To illustrate the approach, we apply the model framework to the sediment quality triad using example lines of evidence for sediment chemistry measurements, bioassay results, and in situ infauna diversity of benthic communities using a simplified hypothetical case study. We then combine the three lines evidence and evaluate sensitivity to the input parameters, and show how uncertainties are propagated and how additional information can be incorporated to rapidly update the probability of impacts. The developed network model can be expanded to accommodate additional lines of evidence, variables and states of importance, and different types of uncertainties in the lines of evidence including spatial and temporal as well as measurement errors. We provide a flexible Bayesian network structure for weighing and integrating lines of evidence for ecological risk determinations

Measuring milk intake in breast-fed babies.

PubMed

Coward, W A

1984-03-01

The relative merits of test weighing, water turnover methods, and a flowmeter method for the measurement of milk intake in breast-fed babies are reviewed to allow the prospective investigator to choose the method most suited to his or her needs. Provided that measurements are made over 3-4 days to minimize the effects of day-to-day variation in milk intake, test weighing is a satisfactory procedure when feed frequency is low and individual feed volumes are large. However, in developing countries where frequency is high and feed volumes low, test weighing is inherently less accurate and may impose an unfamiliar and unphysiological discipline on the mother and child that severely limits its usefulness. In these circumstances methods based on the measurement of water turnover rates using 2H2O are the only procedures likely to yield useful information. A method in which single doses of 2H2O are given to the mother, and milk intake rates measured over 14 days, is described. Neither test weighing nor water turnover methods provide simultaneous milk intake and composition data. The development of flowmeter methods will make this possible, but their use is likely to limited to metabolic wards rather than the home and widespread use in community studies is not a practical proposition.

System and method for identifying, validating, weighing and characterizing moving or stationary vehicles and cargo

DOEpatents

Beshears, David L.; Batsell, Stephen G.; Abercrombie, Robert K.; Scudiere, Matthew B.; White, Clifford P.

2007-12-04

An asset identification and information infrastructure management (AI3M) device having an automated identification technology system (AIT), a Transportation Coordinators' Automated Information for Movements System II (TC-AIMS II), a weigh-in-motion system (WIM-II), and an Automated Air Load Planning system (AALPS) all in electronic communication for measuring and calculating actual asset characteristics, either statically or in-motion, and further calculating an actual load plan.

40 CFR Appendix A to Subpart IIIi... - Determination of Capture Efficiency of Automobile and Light-Duty Truck Spray Booth Emissions From...

Code of Federal Regulations, 2012 CFR

2012-07-01

... coating, i. 2.5.1You must weigh the blank panel. (Same as in bake oven panel test.) The mass of the blank... spray booth zones being tested. (Different than bake oven panel test.) This weighing must be conducted... and before the bake oven where the coating applied to the panel is cured, 2.5.5.2All of the flash-off...

40 CFR Appendix A to Subpart IIIi... - Determination of Capture Efficiency of Automobile and Light-Duty Truck Spray Booth Emissions From...

Code of Federal Regulations, 2010 CFR

2010-07-01

... coating, i. 2.5.1You must weigh the blank panel. (Same as in bake oven panel test.) The mass of the blank... spray booth zones being tested. (Different than bake oven panel test.) This weighing must be conducted... and before the bake oven where the coating applied to the panel is cured, 2.5.5.2All of the flash-off...

40 CFR Appendix A to Subpart IIIi... - Determination of Capture Efficiency of Automobile and Light-Duty Truck Spray Booth Emissions From...

Code of Federal Regulations, 2013 CFR

2013-07-01

... coating, i. 2.5.1You must weigh the blank panel. (Same as in bake oven panel test.) The mass of the blank... spray booth zones being tested. (Different than bake oven panel test.) This weighing must be conducted... and before the bake oven where the coating applied to the panel is cured, 2.5.5.2All of the flash-off...

40 CFR Appendix A to Subpart IIIi... - Determination of Capture Efficiency of Automobile and Light-Duty Truck Spray Booth Emissions From...

Code of Federal Regulations, 2014 CFR

2014-07-01

... coating, i. 2.5.1You must weigh the blank panel. (Same as in bake oven panel test.) The mass of the blank... spray booth zones being tested. (Different than bake oven panel test.) This weighing must be conducted... and before the bake oven where the coating applied to the panel is cured, 2.5.5.2All of the flash-off...

40 CFR Appendix A to Subpart IIIi... - Determination of Capture Efficiency of Automobile and Light-Duty Truck Spray Booth Emissions From...

Code of Federal Regulations, 2011 CFR

2011-07-01

... coating, i. 2.5.1You must weigh the blank panel. (Same as in bake oven panel test.) The mass of the blank... spray booth zones being tested. (Different than bake oven panel test.) This weighing must be conducted... and before the bake oven where the coating applied to the panel is cured, 2.5.5.2All of the flash-off...

Lightweight Motorized Valve

NASA Technical Reports Server (NTRS)

Gonzalez, R.; Vandewalle, J.

1986-01-01

Redesigned actuator assembly weighs 50 percent less. Isolator valve operated by ac motor instead of usual dc solenoid. Valve weighs only 3 lb (1.4 kg). New valve functions with either two-phase or three-phase power. Developed for isolating fluids in propellant tanks, manifolds, and interconnecting lines of Space Shuttle reaction control and orbital maneuvering subsystems, valve suited to applications in which leakage must be kept to minimum at high pressure differences - in petroleum and chemical processing.

Is Maintenance Electroconvulsive Therapy Always an Elective Procedure?: Weighing Medical Versus Psychiatric Risk.

PubMed

Rosenthal, Isobel A; Kellner, Charles H

2018-03-01

Because of the severe nature of psychiatric illness, electroconvulsive therapy (ECT) is not always an "elective procedure." The pre-ECT medical evaluation, although important, should not be an impediment to timely ECT. We argue that an arbitrary regulation requiring new assessments every 30 days may be unduly burdensome and unnecessary. The small medical risk of treatment should be weighed against the potential psychiatric risk (including suicide) of delayed treatment.

Army Health Promotion, Risk Reduction, Suicide Prevention: Report 2010

DTIC Science & Technology

2010-07-01

weigh the risks with potential benefits of using SSRIs when treating 18 to 29 year-old patients due to the increased risk for suicidal behavior...personnel, facilities and resources. (V,3) Paroxetine: A selective serotonin reuptake inhibitor ( SSRI ) antidepressant. Paroxetine is used to treat major...behavior. (page 30)  [MEDCOM] Clinicians need to carefully weigh the risks with potential benefits of using SSRIs when treating 18 to 29 year-old

Optimization of Lyophilized Plasma for Use in Combat Casualties

DTIC Science & Technology

2016-03-01

during which a baseline MAP was recorded and pre-weighed laparotomy sponges were placed in both paracolic gutters and in the pelvis for blood...period, the liver was packed tightly with laparotomy sponges . Swine were randomized to receive either LP reconstituted to 50% (50%LP, n=10) or 100...continuously recorded throughout the study. Blood loss following liver injury was carefully recorded with the use of pre-weighed laparotomy sponges and

Mammalian Toxicological Evaluation of p-Chlorophenyl Methyl Sulfide, p-Chlorophenyl Methyl Sulfoxide, and p-Chlorophenyl Methyl Sulfone.

DTIC Science & Technology

1979-07-01

albino guinea pigs (Charles River Breeding Laboratories, Wilmington, Massachusetts) weighing 300-500 grams were used in the skin sensitization tests...mice weighing 17-21 g used in the studies were supplied by Charles River Breeding Laboratories. Rats and mice were individually housed in...cornea, and conjunctivae (the anterior chamber). All rat eye exams were done by a trained and experienced veterinary ophthalmologist . Hematologr and

Dietary survey methods. 1. A semi-weighted technique for measuring dietary intake within families.

PubMed

Nelson, M; Nettleton, P A

1980-10-01

Family diet studies which measure total family consumption can determine only the average nutrient intake. A method has been devised to measure all family members' individual diets concurrently in order to learn how food and nutrient intake is distributed within the family. In this semi-weighed method, the total quantity of food available for consumption by the family is weighted at time of preparation or serving, and the distribution between family members is recorded in household measures. The method is described in detail. It provides data on individual consumption with an accuracy approaching that of a weighed survey. A co-operation rate of 73 per cent in a random sample of 74 households with two adults and two or three children indicates that this semi-weighed method can be used to assess family diets in a broad cross-section of socio-economic backgounds.

Preliminary measurement of gas concentrations of perfluropropane using an analytical weighing balance.

PubMed

Clarkson, Douglas McG; Manna, Avinish; Hero, Mark

2014-02-01

We describe the use of an analytical weighing balance of measurement accuracy 0.00001g for determination of concentrations of perfluropropane (C3F8) gas used in ophthalmic surgical vitrectomy procedures. A range of test eyes corresponding to an eye volume of 6.1ml were constructed using 27 gauge needle exit ducts and separately 20 gauge (straight) and 23 gauge (angled) entrance ports. This method allowed determination of concentration levels in the sample preparation syringe and also levels in test eyes. It was determined that a key factor influencing gas concentrations accuracy related to the method of gas fill and the value of dead space of the gas preparation/delivery system and with a significant contribution arising from the use of the particle filter. The weighing balance technique was identified as an appropriate technique for estimation of gas concentrations. Copyright © 2013 IPEM. Published by Elsevier Ltd. All rights reserved.

A new approach to the CZ crystal growth weighing control

NASA Astrophysics Data System (ADS)

Kasimkin, P. V.; Moskovskih, V. A.; Vasiliev, Y. V.; Shlegel, V. N.; Yuferev, V. S.; Vasiliev, M. G.; Zhdankov, V. N.

2014-03-01

The aim of a new approach was to improve the robustness of the weighing control of CZ growth especially for semiconductors, for which the “anomalous“ behavior of the apparent weight provokes instability of the servo-loop. In the described method, the periodic reciprocating measuring motion of small amplitude is superposed on the uniform pull-rod movement. The cross-sectional area is determined from the weight sensor responses that are modulated mainly by the forces of hydrostatic pressure. By the example of germanium crystal growth, it is shown that in the control system, based on such a way of the diameter measuring, a simple PI control law provides a good close loop system's stability and dynamics for the materials with the “anomalous” behavior of a weighing signal. The effect of a meniscus on the modulation measuring of a crystal diameter is also discussed.

Socioeconomic and demographic determinants of birth weight in southern rural Ghana: evidence from Dodowa Health and Demographic Surveillance System.

PubMed

Manyeh, Alfred Kwesi; Kukula, Vida; Odonkor, Gabriel; Ekey, Rosemond Akepene; Adjei, Alexander; Narh-Bana, Solomon; Akpakli, David Etsey; Gyapong, Margaret

2016-07-15

Low birth weight (LBW) is one of the major factors affecting child morbidity and mortality worldwide. It also results in substantial costs to the health sector and imposes a significant burden on the society as a whole. This study seeks to investigate the determinants of low birth weight and the incidence of LBW in southern rural Ghana. Pregnancy, birth, demographic and socioeconomic information of 6777 mothers who gave birth in 2011, 2012, and 2013 and information on their babies were extracted from a database. The database of Dodowa Health and Demographic Surveillance System is a longitudinal follow-up of over 24,000 households. The incidence of LBW was calculated and the univariable and multivariable associations between exposure variables and outcome were explored using logistic regression. STATA 11 was used for the analyses. The results revealed that 40.21 % of the infants were not weighed at birth and the incidence of LBW for 2011 to 2013 was 8.72, 7.04 and 7.52 % respectively. Women aged 20-24, 25-29, 30-34 years were more than twice more likely to have babies weighing ≥2.5 kg compared to those <20 years (OR:2.32, 95 % CI:1.65-3.26, OR:2.73, 95 % CI:1.96-3.79, OR:2.87, 95 % CI:2.06-4.01) and mothers who were >34 years were more than three times more likely to have babies weighed ≥2.5 kg (OR: 3.59, 95 % CI:2.56-5.04). Mothers who were civil servants were 77 % more likely to have babies weighed ≥2.5 kg (OR: 1.77, 95 % CI: 1.99-2.87) compared to those who were unemployed. After adjusting for other explanation variables, mothers from poorer households were 30 % more likely to have babies who weighed ≥2.5 kg (OR: 1.30, 95 % CI: 1.01-1.66) compared to those from the poorest households. Women with parity2 and parity > 3 were 30 % and 81 % more likely to have babies weighing ≥2.5 kg (OR: 1.30, 95 % CI: 1.03-1.63, OR: 1.81, 95 % CI: 1.38-2.35) compared to those with parity1. Male infants were 52 % more likely to weigh ≥2.5 kg at birth (OR: 1.52, 95 % CI: 1.32-1.76) compared to females. Our study revealed that having infant birth weight ≥ 2.5 kg is highly associated with socioeconomic status of women household, the gender of an infant, parity, occupation and maternal age.

Feeding by numbers: an ethnographic study of how breastfeeding women understand their babies' weight charts

PubMed Central

Sachs, Magda; Dykes, Fiona; Carter, Bernie

2006-01-01

Background Weighing breastfed babies has been the subject of some controversy as the previous international growth chart was largely based on data from infants fed infant formula. The concern that professionals may be misled by the charts into suggesting to mothers that they supplement unnecessarily was a major impetus for the World Health Organization's investment in a new growth chart. Evidence of interpretation in practice has been scant. Methods An ethnographic study was conducted in a town in the Northwest of England to investigate this issue. In the first phase, women and health visitors were observed in the well-child clinic during clinic sessions and breastfeeding group meetings. In the second phase, longitudinal interviews with 14 women were conducted. Each woman was interviewed up to three times in the first six months after the birth of her baby, with a total of 35 interviews. Results Mothers and health visitors focussed on weight gain with frequent weighing and attention to even minor fluctuations of the plotted line being evident. Women felt it important to ensure their baby's weight followed a centile, and preferred for this to be the fiftieth centile. Interventions included giving infant formula and solids as well as changing what the mother ate and drank. Women also described how they worried about their baby's weight. Little effective support by health professionals with breastfeeding technique was observed. Conclusion Babies were weighed more often than officially recommended, with weighing and plotting being at the core of each clinic visit. The plotted weight chart exerted a powerful influence on both women's and health visitors' understanding of the adequacy of breastfeeding. They appeared to rate the regular progression of weight gains along the chart centiles more highly than continued or exclusive breastfeeding. Thus weighing and visual charting of weight constituted a form of surveillance under the medical gaze, with mothers actively participating in self monitoring of their babies. Interventions, by mothers and health visitors, were targeted towards increasing weight gain rather than improving breastfeeding effectiveness. Improvements in training are needed for health visitors in weighing techniques, assessing growth patterns – particularly of breastfed babies – and in giving information to women, if the practice of routine weight monitoring is to support rather than undermine breastfeeding. PMID:17187669

Effects of low birth weight on time to BCG vaccination in an urban poor settlement in Nairobi, Kenya: an observational cohort study.

PubMed

Mutua, Martin Kavao; Ochako, Rhoune; Ettarh, Remare; Ravn, Henrik; Echoka, Elizabeth; Mwaniki, Peter

2015-04-18

The World Health Organization recommends Bacillus Calmette-Guérin (BCG) vaccination against tuberculosis be given at birth. However, in many developing countries, pre-term and low birth weight infants get vaccinated only after they gain the desired weight. In Kenya, the ministry of health recommends pre-term and low birth weight infants to be immunized at the time of discharge from hospital irrespective of their weight. This paper seeks to understand the effects of birth weight on timing of BCG vaccine. The study was conducted in two Nairobi urban informal settlements, Korogocho and Viwandani which hosts the Nairobi Urban Health and Demographic Surveillance system. All infants born in the study area since September 2006 were included in the study. Data on immunization history and birth weight of the infant were recorded from child's clinic card. Follow up visits were done every four months to update immunization status of the child. A total of 3,602 infants were included in this analysis. Log normal accelerated failure time parametric model was used to assess the association between low birth weight infants and time to BCG immunization. In total, 229 (6.4%) infants were low birth weight. About 16.6% of the low birth weight infants weighed less than 2000 grams and 83.4% weighed between 2000 and 2490 grams. Results showed that, 60% of the low birth weight infants received BCG vaccine after more than five weeks of life. Private health facilities were less likely to administer a BCG vaccine on time compared to public health facilities. The effects of low birth weight on females was 0.60 and 0.97-times that of males for infants weighing 2000-2499 grams and for infants weighing <2000 grams respectively. The effect of low birth weight among infants born in public health facilities was 1.52 and 3.94-times that of infants delivered in private health facilities for infants weighing 2000-2499 grams and those weighing < 2000 grams respectively. Low birth weight infants received BCG immunization late compared to normal birth weight infants. Low birth weight infants delivered in public health facilities were more likely to be immunized much later compared to private health facilities.

Long Range Materials Research

DTIC Science & Technology

1976-01-01

the "weight In water -weight In air" method. The compact Is first weighed dry and then weighed while Immersed completely In water . The density was...calculated from the following: (Wdry) ^ compact W. - W dry wet (1) where P^-o ^8 ’^ density of water corrected for temperature. The weight wet...PPh9) ’"NXV 2 (4) ’ X CH20TS + EtO e These bonds are easily cleaved by water and alcohols . Thererore, it should be possible to

50 CFR Appendix A to Part 679 - Performance and Technical Requirements for Scales Used To Weigh Catch at Sea in the Groundfish...

Code of Federal Regulations, 2014 CFR

2014-10-01

... Voltage Variation A.3.4Short Time Power Reduction A.3.5Bursts A.3.6Electrostatic Discharge A.3... time of the test. 2.2.1.2Zero Load Tests. For zero load tests conducted in a laboratory or on a scale... other material weighed on the scale; and vi. The date and time the information is printed. b. For the...

50 CFR Appendix A to Part 679 - Performance and Technical Requirements for Scales Used To Weigh Catch at Sea in the Groundfish...

Code of Federal Regulations, 2012 CFR

2012-10-01

... Voltage Variation A.3.4Short Time Power Reduction A.3.5Bursts A.3.6Electrostatic Discharge A.3... time of the test. 2.2.1.2Zero Load Tests. For zero load tests conducted in a laboratory or on a scale... other material weighed on the scale; and vi. The date and time the information is printed. b. For the...

50 CFR Appendix A to Part 679 - Performance and Technical Requirements for Scales Used To Weigh Catch at Sea in the Groundfish...

Code of Federal Regulations, 2011 CFR

2011-10-01

... Voltage Variation A.3.4Short Time Power Reduction A.3.5Bursts A.3.6Electrostatic Discharge A.3... time of the test. 2.2.1.2Zero Load Tests. For zero load tests conducted in a laboratory or on a scale... other material weighed on the scale; and vi. The date and time the information is printed. b. For the...

50 CFR Appendix A to Part 679 - Performance and Technical Requirements for Scales Used To Weigh Catch at Sea in the Groundfish...

Code of Federal Regulations, 2010 CFR

2010-10-01

... Voltage Variation A.3.4Short Time Power Reduction A.3.5Bursts A.3.6Electrostatic Discharge A.3... time of the test. 2.2.1.2Zero Load Tests. For zero load tests conducted in a laboratory or on a scale... other material weighed on the scale; and vi. The date and time the information is printed. b. For the...

50 CFR Appendix A to Part 679 - Performance and Technical Requirements for Scales Used To Weigh Catch at Sea in the Groundfish...

Code of Federal Regulations, 2013 CFR

2013-10-01

... Voltage Variation A.3.4Short Time Power Reduction A.3.5Bursts A.3.6Electrostatic Discharge A.3... time of the test. 2.2.1.2Zero Load Tests. For zero load tests conducted in a laboratory or on a scale... other material weighed on the scale; and vi. The date and time the information is printed. b. For the...

Assessment of ANFO on the Environment

DTIC Science & Technology

2010-01-01

cycloalkanes ( naphthenes ) are hydrogen-saturated and compose approximately 80 to 90% of the fuel oils. Aromatics (e.g., benzene) and olefins (e.g...well as methane. NOx will also contribute to the production of acid rain. DRDC Valcartier TM 2009-195 5 Other combustion products of ANFO have...weighed, placed in a hole, sealed, and kept at 55 oC during testing, after which it was removed from the boreholes and weighed at 1-, 2-, 6-, 8-, 9

Heart rate detection from single-foot plantar bioimpedance measurements in a weighing scale.

PubMed

Diaz, Delia H; Casas, Oscar; Pallas-Areny, Ramon

2010-01-01

Electronic bathroom scales are an easy-to-use, affordable mean to measure physiological parameters in addition to body weight. They have been proposed to obtain the ballistocardiogram (BCG) and derive from it the heart rate, cardiac output and systolic blood pressure. Therefore, weighing scales may suit intermittent monitoring in e-health and patient screening. Scales intended for bioelectrical impedance analysis (BIA) have also been proposed to estimate the heart rate by amplifying the pulsatile impedance component superimposed on the basal impedance. However, electronic weighing scales cannot easily obtain the BCG from people that have a single leg neither are bioimpedance measurements between both feet recommended for people wearing a pacemaker or other electronic implants, neither for pregnant women. We propose a method to detect the heart rate (HR) from bioimpedance measured in a single foot while standing on an bathroom weighting scale intended for BIA. The electrodes built in the weighing scale are used to apply a 50 kHz voltage between the outer electrode pair and to measure the drop in voltage across the inner electrode pair. The agreement with the HR simultaneously obtained from the ECG is excellent. We have also compared the drop in voltage across the waist and the thorax with that obtained when measuring bioimpedance between both feet to compare the possible risk of the proposed method to that of existing BIA scales.

A novel cell weighing method based on the minimum immobilization pressure for biological applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhao, Qili; Institute of Robotics and Automatic Information System, Nankai University, Tianjin 300071; Shirinzadeh, Bijan

2015-07-28

A novel weighing method for cells with spherical and other regular shapes is proposed in this paper. In this method, the relationship between the cell mass and the minimum aspiration pressure to immobilize the cell (referred to as minimum immobilization pressure) is derived for the first time according to static theory. Based on this relationship, a robotic cell weighing process is established using a traditional micro-injection system. Experimental results on porcine oocytes demonstrate that the proposed method is able to weigh cells at an average speed of 16.3 s/cell and with a success rate of more than 90%. The derived cellmore » mass and density are in accordance with those reported in other published results. The experimental results also demonstrated that this method is able to detect less than 1% variation of the porcine oocyte mass quantitatively. It can be conducted by a pair of traditional micropipettes and a commercial pneumatic micro-injection system, and is expected to perform robotic operation on batch cells. At present, the minimum resolution of the proposed method for measuring the cell mass can be 1.25 × 10{sup −15 }kg. Above advantages make it very appropriate for quantifying the amount of the materials injected into or moved out of the cells in the biological applications, such as nuclear enucleations and embryo microinjections.« less

Body composition of university students by hydrostatic weighing and skinfold measurement.

PubMed

Jürimäe, T; Jagomägi, G; Lepp, T

1992-12-01

The body composition of 124 male and 70 female Tartu University students was measured by three different methods: hydrostatic weighing by maximal expiration, hydrostatic weighing by maximal inspiration and subcutaneous fat thickness measurements. Our results show that the proposed body density measuring method by maximal expiration is simple, reliable and applicable not only in indoor swimming pools but in field conditions as well. The second new hydrostatic weighing apparatus is more comfortable for the subjects where the body density is measured at maximal inspiration. The mean body density of males was somewhat higher when measured by the maximal inspiration (1.066 +/- 0.012 g.ml-1) than when measured by the maximal expiration (1.063 +/- 0.009 g.ml-1, p < 0.05). For females, on the contrary, the maximal expiration method (1.044 +/- 0.010 g.ml-1) yielded a higher body density value than when measured by the maximal inspiration (1.040 +/- 0.011 g.ml-1, p > 0.05). The body fat percentage measured by skinfold thickness correlated significantly with the body fat percentage calculated by body density by maximal expiration (males r = 0.420, females r = 0.531) and inspiration (males r = 0.507, females r = 0.663). We must conclude that the presented two methods of measuring body density offer new possibilities for densitometric analysis without the need for expensive laboratory equipment.

Design and validation of an automated hydrostatic weighing system.

PubMed

McClenaghan, B A; Rocchio, L

1986-08-01

The purpose of this study was to design and evaluate the validity of an automated technique to assess body density using a computerized hydrostatic weighing system. An existing hydrostatic tank was modified and interfaced with a microcomputer equipped with an analog-to-digital converter. Software was designed to input variables, control the collection of data, calculate selected measurements, and provide a summary of the results of each session. Validity of the data obtained utilizing the automated hydrostatic weighing system was estimated by: evaluating the reliability of the transducer/computer interface to measure objects of known underwater weight; comparing the data against a criterion measure; and determining inter-session subject reliability. Values obtained from the automated system were found to be highly correlated with known underwater weights (r = 0.99, SEE = 0.0060 kg). Data concurrently obtained utilizing the automated system and a manual chart recorder were also found to be highly correlated (r = 0.99, SEE = 0.0606 kg). Inter-session subject reliability was determined utilizing data collected on subjects (N = 16) tested on two occasions approximately 24 h apart. Correlations revealed high relationships between measures of underwater weight (r = 0.99, SEE = 0.1399 kg) and body density (r = 0.98, SEE = 0.00244 g X cm-1). Results indicate that a computerized hydrostatic weighing system is a valid and reliable method for determining underwater weight.

Optimizing care of ventilated infants by improving weighing accuracy on incubator scales.

PubMed

El-Kafrawy, Ula; Taylor, R J

2016-01-01

To determine the accuracy of weighing ventilated infants on incubator scales and whether the accuracy can be improved by the addition of a ventilator tube compensator (VTC) device to counterbalance the force exerted by the ventilator tubing. Body weights on integral incubator scales were compared in ventilated infants (with and without a VTC), with body weights on standalone electronic scales (true weight). Individual and series of trend weights were obtained on the infants. The method of Bland and Altman was used to assess the introduced bias. The study included 60 ventilated infants; 66% of them weighed <1000 g. A total of 102 paired-weight datasets for 30 infants undergoing conventional ventilation and 30 undergoing high frequency oscillator ventilation (HFOV) supported by a SensorMedics oscillator, (with and without a VTC) were obtained. The mean differences and (95% CI for the bias) between the integral and true scale weighing methods was 60.8 g (49.1 g to 72.5 g) without and -2.8 g (-8.9 g to 3.3 g) with a VTC in HFOV infants; 41.0 g (32.1 g to 50.0 g) without and -5.1 g (-9.3 g to -0.8 g) with a VTC for conventionally ventilated infants. Differences of greater than 2% were considered clinically relevant and occurred in 93.8% without and 20.8% with a VTC in HFOV infants and 81.5% without and 27.8% with VTC in conventionally ventilated infants. The use of the VTC device represents a substantial improvement on the current practice for weighing ventilated infants, particularly in the extreme preterm infants where an over- or underestimated weight can have important clinical implications for treatment. A large-scale clinical trial to validate these findings is needed.

A Mathematical Model to Predict and Maintain the Neutral Buoyancy of Suited Astronauts

NASA Technical Reports Server (NTRS)

Clowers, Kurt; Jaramillo, Marcos; Nguyen, Daniel; Sweet, Robert; Rajulu, Sudhakar

2006-01-01

A previous study reported that inadequate weigh outs of suited subjects contribute to fatigue and the risk of injury during training in the Neutral Buoyancy Laboratory (NBL). Another study suggested that shoulder injuries observed in suited subjects who train in the NBL may be attributed to excessive righting moments caused by a non-optimal weigh out. The purpose of this study was to develop a mathematical model to predict and maintain the neutral buoyancy of suited subjects during training operations at the NBL. Due to time constraints, one certified NBL support diver served as a subject (height: 66.54 in; weight: 182 lbs) for this study and only one complete test was conducted. The study was divided into two runs for which the first run required the NBL divers to perform a weigh out similar to a suited astronaut on a scuba diver wearing a mock Portable Life Support System and a Displays and Control Module. For the second run, the same subject and equipment were weighed out according to the mathematical model. The objective of each run was to achieve a neutrally buoyant subject floating 450 to the pool floor. Motion data was collected using two underwater cameras and analyzed using Dartfish video analysis software while force and moment data were recorded using an AMTI force plate. The results from the NBL divers visual run indicate that the subject was floating at an angle of 29.50 while the resultant force and moment data were 1.139 lb and 1.125 ft-lb respectively. The mathematical model s weigh out resulted in the subject floating at an angle of 37.40 and a resultant force of 0.765 lb and resultant moment of 1.248 ft-lb. The mathematical model was better able to orient the subject and reduce resultant moment and force as compared to the NBL divers.

WATER SORPTION AND SOLUBILITY OF DIFFERENT CALCIUM HYDROXIDE CEMENTS

PubMed Central

Francisconi, Luciana Fávaro; de Freitas, Anderson Pinheiro; Scaffa, Polliana Mendes Candia; Mondelli, Rafael Francisco Lia; Francisconi, Paulo Afonso Silveira

2009-01-01

Objectives: Calcium hydroxide cements have been largely used in deep cavities due to their abilities to stimulate dentin formation. However, their resistance can be relatively low and their solubility relatively high, in many instances. This study evaluated water sorption and solubility of different calcium hydroxide cements, in order to show alterations that may reduce their effectiveness. Material and methods: Five discs (20 mm in diameter and 1.5 mm thick) of three different materials (Biocal®, Dycal® and Hidro C®) were prepared with the aid of a ring-shaped metallic matrix. After being stored at 37°C for 24 h, the discs were weighed on a precision weight scale, dehydrated and weighed again. Immediately after weighing, discs were stored for a week in 50 mL of distilled water at 37°C and, then, weighed again, dehydrated and submitted to a new weighing. The loss of soluble material and its water sorption was obtained from the difference between the initial and the final dry mass of each disc, after 1 week of immersion in water. Data were analyzed for significant differences by two-way ANOVA and Tukey's test (p<0.05). Results: Mean water sorption values (g) ± standard deviation and percentage (%), for each evaluated cement, were: Biocal® (0.006 ± 0.001 / 2.15); Dycal® (0.016 ± 0.004 / 5.49); and Hidro C® (0.025 ± 0.003 / 8.27). Mean solubility values (g) ± standard deviation and percentage (%), for each evaluated cement, were: Biocal® (0.002 ± 0.001 / 0.72); Dycal® (0.013 ± 0.004 / 4.21); and Hidro C® (0.023 ± 0.004 / 7.65). Conclusions: Biocal® absorbed less water and was less soluble than the other evaluated cements; Hidro C® exhibited the highest water sorption and solubility values; and there were significant differences among all evaluated experimental groups. PMID:19936520

Dynamic Weighing Experiments—The Way to New Physics of Gravitation

NASA Astrophysics Data System (ADS)

Dmitriev, A. L.; Nikushchenko, E. M.; Bulgakova, S. A.

2010-01-01

Dynamic weighing is a measuring of size of the average gravity force acting on a test body which is in the state of accelerated movement. The acceleration of a body, or its microparticles, can be caused both by forces of gravitation, and by a direct, electromagnetic in nature, influence on the part of other bodies. It is just dynamic weighing of bodies which is informative in studying the features of electromagnetic and gravitational forces interaction. The report gives a brief review of results of experiments with weighing of accelerated moving bodies—in case of shock phenomena, in state of rotation, and in heating. Special attention is given to measurements of free fall accelerations of a mechanical rotor. In majority of the laboratory experiments executed with the purpose of checking the equivalence principle, the axis of a rotor was oriented verticallly. In our experiment we measured the free fall accelerations of the closed container inside which a mechanical rotor (gyroscope) with a horizontal axis of rotation was installed. There was observed an appreciable, essentially exceeding errors of measurements increase of acceleration of free falling of the container at angular speed of rotation of a rotor up to 20 000 rev/min. The physical conditions of free vertical falling of a body essentially differ from conditions of rotary (orbital) movement of a body in the field of gravity and the result obtained by us does not contradict the results of measurements of a gyroscope precession on satellites. Experiments with dynamic weighing of bodies give useful information on complex properties of the gravity force which are beyond the scope of well-known theories. Their careful analysis will allow to expand and supplement the concepts based on the general theory of relativity, and probably to open a way to new physics of gravitation and to new principles of movement.

Vacuum Technology Considerations For Mass Metrology

PubMed Central

Abbott, Patrick J.; Jabour, Zeina J.

2011-01-01

Vacuum weighing of mass artifacts eliminates the necessity of air buoyancy correction and its contribution to the measurement uncertainty. Vacuum weighing is also an important process in the experiments currently underway for the redefinition of the SI mass unit, the kilogram. Creating the optimum vacuum environment for mass metrology requires careful design and selection of construction materials, plumbing components, pumping, and pressure gauging technologies. We review the vacuum technology1 required for mass metrology and suggest procedures and hardware for successful and reproducible operation. PMID:26989593

Proceedings of Food for the Armed Forces International Meeting (3rd) Held at Natick, Massachusetts on 14-17 October 1975

DTIC Science & Technology

1976-03-01

were lined with plastic bags and any inedible material such as potato peelings produced during the preparation ’I of the food was collected in them...and later weighed. 4.2 Inedible materials such as meat bones left at the end of the meal were ,i also collected and weighed. 4.3 Vegetable peelings ...Cheese, Processed, American Oranges, Peeled , All Var Beverages, Carbonated, Fruit-Flavored Tomato Catsup, Bottled Margarine Beverage, Alcohol, Wine

New laser power sensor using weighing method

NASA Astrophysics Data System (ADS)

Pinot, P.; Silvestri, Z.

2018-01-01

We present a set-up using a piece of pyrolytic carbon (PyC) to measure laser power in the range from a few milliwatts to a few watts. The experimental configuration consists in measuring the magnetic repulsion force acting between a piece of PyC placed on a weighing pan and in a magnetic induction generated by a magnet array in a fixed position above the PyC sheet. This involves a repulsion force on the PyC piece which is expressed in terms of mass by the balance display. The quantities affecting the measurement results have been identified. An example of metrological characterization in terms of accuracy, linearity and sensitivity is given. A relative uncertainty of optical power measurement for the first experimental set-up is around 1%. The wavelength and power density dependence on power response of this device has been demonstrated. This PyC-based device presented here in weighing configuration and the other one previously studied in levitation configuration offer a new technique for measuring optical power.

Study of glass hydrometer calibration by hydrostatic weighting

NASA Astrophysics Data System (ADS)

Chen, Chaoyun; Wang, Jintao; Li, Zhihao; Zhang, Peiman

2016-01-01

Glass hydrometers are simple but effective instruments for measuring the density of liquids. Glass hydrometers calibration based on the Archimedes law, using silicon ring as a reference standard solid density, n-tridecane with density stability and low surface tension as the standard working liquid, based on hydrostatic weighing method designs a glass hydrometer calibration system. Glass hydrometer calibration system uses CCD image measurement system to align the scale of hydrometer and liquid surface, with positioning accuracy of 0.01 mm. Surface tension of the working liquid is measured by Whihemy plate. According to twice glass hydrometer weighing in the air and liquid can calculate the correction value of the current scale. In order to verify the validity of the principle of the hydrostatic weighing method of glass hydrometer calibration system, for measuring the density range of (770-790) kg/m3, with a resolution of 0.2 kg/m3 of hydrometer. The results of measurement compare with the Physikalisch-Technische Bundesanstalt(PTB) ,verifying the validity of the calibration system.

A modified method for COD determination of solid waste, using a commercial COD kit and an adapted disposable weighing support.

PubMed

André, L; Pauss, A; Ribeiro, T

2017-03-01

The chemical oxygen demand (COD) is an essential parameter in waste management, particularly when monitoring wet anaerobic digestion processes. An adapted method to determine COD was developed for solid waste (total solids >15%). This method used commercial COD tubes and did not require sample dilution. A homemade plastic weighing support was used to transfer the solid sample into COD tubes. Potassium hydrogen phthalate and glucose used as standards showed an excellent repeatability. A small underestimation of the theoretical COD value (standard values around 5% lower than theoretical values) was also observed, mainly due to the intrinsic COD of the weighing support and to measurement uncertainties. The adapted COD method was tested using various solid wastes in the range of 1-8 mg COD , determining the COD of dried and ground cellulose, cattle manure, straw and a mixed-substrate sample. This new adapted method could be used to monitor and design dry anaerobic digestion processes.

Percutaneous closure of a large patent ductus arteriosus in a preterm newborn weighing 1400 g without using arterial sheath: an innovative technique.

PubMed

Garg, Gaurav; Garg, Vishal; Prakash, Amit

2018-03-01

Percutaneous closure of patent ductus arteriosus is well established in infants weighing >5 kg, but data regarding outcome of preterm especially very low birth weight infants is minimal. Although surgical ligation of patent ductus arteriosus is the preferred and well-accepted modality of treatment after failure of drug therapy in preterm infants, it has also got its own demerits in such a small and fragile subset. Device closure in infants weighing <1.5 kg is rarely attempted because of high chances of complications, especially acute arterial injury due to the arterial sheath. We received a 1.4-kg ventilator-dependent infant for closure of large patent ductus arteriosus. Percutaneous closure of patent ductus arteriosus was done successfully and the infant was discharged on room air with a weight of 1.8 kg. We present here an innovative technique in which successful patent ductus arteriosus device closure was done in a 1.4-kg infant without using arterial sheath.

Hydrostatic weighing without head submersion in morbidly obese females.

PubMed

Evans, P E; Israel, R G; Flickinger, E G; O'Brien, K F; Donnelly, J E

1989-08-01

This study tests the validity of hydrostatic weighing without head submersion (HWNS) for determining the body density (Db) of morbidly obese (MO) females. Eighty MO females who were able to perform traditional hydrostatic weighing at residual volume (HW) underwent four counterbalanced trials for each procedure (HW and HWNS) to determine Db. Residual volume was determined by oxygen dilution. Twenty subjects were randomly excluded from the experimental group (EG) and assigned to a cross-validation group (CV). Simple linear regression was performed on EG data (n = 60, means = 36.8 y, means % fat = 50.1) to predict Db from HWNS (Db = 0.569563 [Db HWNS] + 0.408621, SEE = 0.0066). Comparison of the predicted and actual Db for CV group yielded r = 0.69, SEE = 0.0066, E statistic = 0.0067, mean difference = 0.0013 kg/L. The SEE and E statistic for body fat were 3.31 and 3.39, respectively. Mean difference for percent fat was 0.66%. Results indicate that HWNS is a valid technique for assessing body composition in MO females.

A new gas dilution method for measuring body volume.

PubMed Central

Nagao, N; Tamaki, K; Kuchiki, T; Nagao, M

1995-01-01

This study was designed to examine the validity of a new gas dilution method (GD) for measuring human body volume and to compare its accuracy with the results obtained by the underwater weighing method (UW). We measured the volume of plastic bottles and 16 subjects (including two females), aged 18-42 years with each method. For the bottles, the volume measured by hydrostatic weighing was correlated highly (r = 1.000) with that measured by the new gas dilution method. For the subjects, the body volume determined by the two methods was significantly correlated (r = 0.998). However, the subject's volume measured by the gas dilution method was significantly larger than that by underwater weighing method. There was significant correlation (r = 0.806) between GD volume-UW volume and the body mass index (BMI), so that UW volume could be predicted from GD volume and BMI. It can be concluded that the new gas dilution method offers promising possibilities for future research in the population who cannot submerge underwater. PMID:7551760

Mobile electric power. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bloomfield, D.P.; Bloomfield, V.J.; Grosjean, P.D.

1995-12-01

The objective of this program was to develop a mobile fuel cell power supply for use by soldiers. The Century Series of 100 through 500 watt fuel cell power supplies was developed. The Century Series fuel cell power supplies are made up of a fuel cell stack, chemical hydride hydrogen supply, a fan and a controller. The FC-200, the 200 watt Century Series power supply, weighs 8.8 ib. and has a volume of 322 in.3. The operating point is 0.7 volt/cell at 125 ASF; a power density of 22.7 watts/lb. or 0.62 watts/in.3 and an energy density of 110 whr/lb.more » The prototype 750 whr hydrogen supply weighs 7 lbs. and has a volume of 193 in.3. The fuel elements weigh 0.45 lb. and require 0.79 lbs. of water. The FC-200 has powered a scooter requiring a starting current of three times the rated current of the stack. It has also powered a microclimate cooler. (KAR) P. 1.« less

Mobile electric power

NASA Astrophysics Data System (ADS)

Bloomfield, David P.; Bloomfield, Valerie J.; Grosjean, Paul D.; Kelland, James W.

1995-02-01

The objective of this program was to develop a mobile fuel cell power supply for use by soldiers. The Century Series of 100 through 500 watt fuel cell power supplies was developed. The Century Series fuel cell power supplies are made up of a fuel cell stack, chemical hydride hydrogen supply, a fan and a controller. The FC-200, the 200 watt Century Series power supply, weighs 8.8 lb. and has a volume of 322 cu in. The operating point is 0.7 volt/cell at 125 ASF; a power density of 22.7 watts/cu in. or 0.62 watts/cu in. and an energy density of 110 whr/lb. The prototype 750 whr hydrogen supply weighs 7 lbs. and has a volume of 193 cu in. The fuel elements weigh 0.45 lb. and require 0.79 lbs. of water. The FC-200 has powered a scooter requiring a starting current of three times the rated current of the stack. It has also powered a microclimate cooler.

Weighing Clinical Evidence Using Patient Preferences: An Application of Probabilistic Multi-Criteria Decision Analysis.

PubMed

Broekhuizen, Henk; IJzerman, Maarten J; Hauber, A Brett; Groothuis-Oudshoorn, Catharina G M

2017-03-01

The need for patient engagement has been recognized by regulatory agencies, but there is no consensus about how to operationalize this. One approach is the formal elicitation and use of patient preferences for weighing clinical outcomes. The aim of this study was to demonstrate how patient preferences can be used to weigh clinical outcomes when both preferences and clinical outcomes are uncertain by applying a probabilistic value-based multi-criteria decision analysis (MCDA) method. Probability distributions were used to model random variation and parameter uncertainty in preferences, and parameter uncertainty in clinical outcomes. The posterior value distributions and rank probabilities for each treatment were obtained using Monte-Carlo simulations. The probability of achieving the first rank is the probability that a treatment represents the highest value to patients. We illustrated our methodology for a simplified case on six HIV treatments. Preferences were modeled with normal distributions and clinical outcomes were modeled with beta distributions. The treatment value distributions showed the rank order of treatments according to patients and illustrate the remaining decision uncertainty. This study demonstrated how patient preference data can be used to weigh clinical evidence using MCDA. The model takes into account uncertainty in preferences and clinical outcomes. The model can support decision makers during the aggregation step of the MCDA process and provides a first step toward preference-based personalized medicine, yet requires further testing regarding its appropriate use in real-world settings.

Direct gravimetric determination of aerosol mass concentration in central antarctica.

PubMed

Annibaldi, Anna; Truzzi, Cristina; Illuminati, Silvia; Scarponi, Giuseppe

2011-01-01

In Antarctica, experimental difficulties due to extreme conditions have meant that aerosol mass has rarely been measured directly by gravimetry, and only in coastal areas where concentrations were in the range of 1-7 μg m(-3). The present work reports on a careful differential weighing methodology carried out for the first time on the plateau of central Antarctica (Dome C, East Antarctica). To solve problems of accurate aerosol mass measurements, a climatic room was used for conditioning and weighing filters. Measurements were carried out in long stages of several hours of readings with automatic recording of temperature/humidity and mass. This experimental scheme allowed us to sample from all the measurements (up to 2000) carried out before and after exposure, those which were recorded under the most stable humidity conditions and, even more importantly, as close to each other as possible. The automatic reading of the mass allowed us in any case to obtain hundreds of measurements from which to calculate average values with uncertainties sufficiently low to meet the requirements of the differential weighing procedure (±0.2 mg in filter weighing, between ±7% and ±16% both in aerosol mass and concentration measurements). The results show that the average summer aerosol mass concentration (aerodynamic size ≤10 μm) in central Antarctica is about 0.1 μg m(-3), i.e., about 1/10 of that of coastal Antarctic areas. The concentration increases by about 4-5 times at a site very close to the station.

Pseudo-Random Sequence Modifications for Ion Mobility Orthogonal Time of Flight Mass Spectrometry

PubMed Central

Clowers, Brian H.; Belov, Mikhail E.; Prior, David C.; Danielson, William F.; Ibrahim, Yehia; Smith, Richard D.

2008-01-01

Due to the inherently low duty cycle of ion mobility spectrometry (IMS) experiments that sample from continuous ion sources, a range of experimental advances have been developed to maximize ion utilization efficiency. The use of ion trapping mechanisms prior to the ion mobility drift tube has demonstrated significant gains over discrete sampling from continuous sources; however, these technologies have traditionally relied upon a signal averaging to attain analytically relevant signal-to-noise ratios (SNR). Multiplexed (MP) techniques based upon the Hadamard transform offer an alternative experimental approach by which ion utilization efficiency can be elevated to ∼ 50 %. Recently, our research group demonstrated a unique multiplexed ion mobility time-of-flight (MP-IMS-TOF) approach that incorporates ion trapping and can extend ion utilization efficiency beyond 50 %. However, the spectral reconstruction of the multiplexed signal using this experiment approach requires the use of sample-specific weighing designs. Though general weighing designs have been shown to significantly enhance ion utilization efficiency using this MP technique, such weighing designs cannot be applied to all samples. By modifying both the ion funnel trap and the pseudo random sequence (PRS) used for the MP experiment we have eliminated the need for complex weighing matrices. For both simple and complex mixtures SNR enhancements of up to 13 were routinely observed as compared to the SA-IMS-TOF experiment. In addition, this new class of PRS provides a two fold enhancement in ion throughput compared to the traditional HT-IMS experiment. PMID:18311942

Validation of energy requirement equations for estimation of breast milk consumption in infants.

PubMed

Schoen, Stefanie; Sichert-Hellert, Wolfgang; Kersting, Mathilde

2009-12-01

To test equations for calculating infants' energy requirements as a simple and reliable instrument for estimating the amount of breast milk consumed in epidemiological studies where test-weighing is not possible. Infants' energy requirements were calculated using three different equations based on reference data and compared with actual energy intakes assessed using the 3 d weighed dietary records of breast-fed infants from the DOrtmund Nutritional and Anthropometric Longitudinally Designed (DONALD) Study. A sub-sample of 323 infants from the German DONALD Study who were predominantly breast-fed for at least the first four months of life, and who had 3 d weighed dietary records and repeated body weight measurements within the first year of life. Healthy, term infants breast-fed for at least 4 months, 0-12 months of age. The overall differences between measured energy intake and calculated energy requirements were quite small, never more than 10 % of total energy intake, and smaller than the mean variance of energy intake between the three days of recording. The equation of best fit incorporated body weight and recent growth, while the worst fit was found for the equation not considering body weight. Breast milk consumption in fully and partially breast-fed infants can be reasonably quantified by calculating the infants' individual energy requirements via simple equations. This provides a feasible approach for estimating infant energy intake in epidemiological studies where test-weighing of breast milk is not possible.

Transcatheter closure of patent ductus arteriosus in children weighing 10 kg or less: Initial experience at Sohag University Hospital.

PubMed

Ali, Safaa; El Sisi, Amel

2016-04-01

To assess the challenges, feasibility, and efficacy of device closure of patent ductus arteriosus (PDA) in small children weighing ⩽10 kg for different types of devices used in an initial experience at Sohag University hospital. Between March 2011 and September 2014, 91 patients with PDA underwent transcatheter closure in our institute, among whom 54 weighed ⩽10 kg. All of these patients underwent transcatheter closure of PDA using either a Cook Detachable Coil, PFM Nit-Occlud, or Amplatzer duct occluder. A retrospective review of the treatment results and adverse events was performed. Successful device placement was achieved in 53/54 small children (98.1%). The median minimum PDA diameter was 2.4 mm [interquartile range (IQR, 1.8-3.5 mm), median weight 8 kg (IQR, 7-10 kg), and median age 10 months (IQR, 8-17 months)]. Mild aortic obstruction occurred in one case (1.9%), as the device became displaced towards the aorta after release. The device embolized in one case (1.9%) and no retrieval attempt was made. Five cases (9.3%) had minor vascular complications. With the current availability of devices for PDA closure, transcatheter closure of PDA is considered safe and efficacious in small children weighing ⩽10 kg with good mid-term outcome. The procedure had a low rate of high-severity adverse events even with the initial experience of the catheterization laboratory.

Impact of medical and nonmedical factors on physician decision making for HIV/AIDS antiretroviral treatment.

PubMed

Bogart, L M; Kelly, J A; Catz, S L; Sosman, J M

2000-04-15

To examine influences of medical factors (e.g., viral load) and nonmedical factors (e.g., patient characteristics) on treatment decisions for highly active antiretroviral therapy (HAART), we sent a survey to a random sample of 995 infectious disease physicians who treat patients with HIV/AIDS in the United States in August, 1998. The response rate was 53%. Respondents were asked to report their current practices with respect to antiretroviral treatment and the extent to which each of three medical and 17 nonmedical factors would influence them for or against prescribing HAART to a hypothetical HIV-positive patient. Most reported initiating HAART with findings of low CD4+ cell counts and high viral loads, and weighing CD4+ cell counts, viral load, and opportunistic infection heavily in their decisions to prescribe HAART. Patients' prior history of poor adherence was weighed very much against initiating HAART. Patient homelessness, heavy alcohol use, injection drug use, and prior psychiatric hospitalization were cited by most physicians as weighing against HAART initiation. Thus, most physicians in this sample follow guidelines for the use of HAART, and nonmedical factors related to patients' life situations are weighed as heavily as disease severity in treatment decisions. As HIV increasingly becomes a disease associated with economic disadvantage and other social health problems, it will be essential to develop interventions and care support systems to enable patients experiencing these problems to benefit from HIV treatment advances.

Effects of Backpack Frame Length, Pack Load, and Participation Time on the Physical Performance of Men and Women

DTIC Science & Technology

1983-08-01

procedures and results for this project on the Biomechanics of Load Carrying Behavior. The work was formulated and directed by Drs. Carolyn K. Bensel...The first of these loads had a mass of approximately 26 kg, including all clothing and equipment worn or carried by the subject, and served as a...rifle, which weighed 3.17 kg, and the ALICE load carrying system. The pack, which weighed 1.10 kg, was loaded with Army clothing and equipment items

Application of Copper Indium Gallium Diselenide Photovoltaic Cells to Extend the Endurance and Capabilities of the Raven RQ-11B Unmanned Aerial Vehicle

DTIC Science & Technology

2010-09-01

POWER POINT TRACKER A more suitable component used in photovoltaic appli- cations is the Maximum Power Point Tracker ( MPPT ). An MPPT ... MPPT / power converter (Solar Charge Controller ) weighed 6.5-Oz, but without the casing it weighed only 3.6-Oz. We preferred to use it without the...for this test was the GV-4 Low Power Charge Controller from GENASUN used in previous the- sis work [5]. This MPPT was programmed to charge up

Environmental Consequences of Nanotechnologies: Nanoparticle Dispersion in Aqueous Media: SOP-T-1

DTIC Science & Technology

2015-02-01

containing ice • Bath sonicator • Weighing dish (aluminum) • Stainless steel spatula • Analytical balance • Lab jack for lifting sample • Volumetric...balance and an aluminum dish, weigh an adequate mass of dry powder under a fume hood to achieve the desired concentration into ultrapure water (<T>, <R...0.025 0.5 0.05 1 0.5 10 1 20 2. Add ultra-pure water in a glass beaker with NP powder to /flask under fume hood (<T>, <R>). 3. Degas the bath

Comparison of the Liaison® Calprotectin kit with a well established point of care test (Quantum Blue - Bühlmann-Alere®) in terms of analytical performances and ability to detect relapses amongst a Crohn population in follow-up.

PubMed

Delefortrie, Quentin; Schatt, Patricia; Grimmelprez, Alexandre; Gohy, Patrick; Deltour, Didier; Collard, Geneviève; Vankerkhoven, Patrick

2016-02-01

Although colonoscopy associated with histopathological sampling remains the gold standard in the diagnostic and follow-up of inflammatory bowel disease (IBD), calprotectin is becoming an essential biomarker in gastroenterology. The aim of this work is to compare a newly developed kit (Liaison® Calprotectin - Diasorin®) and its two distinct extraction protocols (weighing and extraction device protocol) with a well established point of care test (Quantum Blue® - Bühlmann-Alere®) in terms of analytical performances and ability to detect relapses amongst a Crohn's population in follow-up. Stool specimens were collected over a six month period and were composed of control and Crohn's patients. Amongst the Crohn's population disease activity (active vs quiescent) was evaluated by gastroenterologists. A significant difference was found between all three procedures in terms of calprotectin measurements (weighing protocol=30.3μg/g (median); stool extraction device protocol=36.9μg/g (median); Quantum Blue® (median)=63; Friedman test, P value=0.05). However, a good correlation was found between both extraction methods coupled with the Liaison® analyzer and between the Quantum Blue® (weighing protocol/extraction device protocol Rs=0.844, P=0.01; Quantum Blue®/extraction device protocol Rs=0.708, P=0.01; Quantum Blue®/weighing protocol, Rs=0.808, P=0.01). Finally, optimal cut-offs (and associated negative predictive values - NPV) for detecting relapses were in accordance with above results (Quantum Blue® 183.5μg/g and NPV of 100%>extraction device protocol+Liaison® analyzer 124.5μg/g and NPV of 93.5%>weighing protocol+Liaison® analyzer 106.5μg/g and NPV of 95%). Although all three methods correlated well and had relatively good NPV in terms of detecting relapses amongst a Crohn's population in follow-up, the lack of any international standard is the origin of different optimal cut-offs between the three procedures. Copyright © 2015 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Evaluation of a Modified Italian European Prospective Investigation into Cancer and Nutrition Food Frequency Questionnaire for Individuals with Celiac Disease.

PubMed

Mazzeo, Teresa; Roncoroni, Leda; Lombardo, Vincenza; Tomba, Carolina; Elli, Luca; Sieri, Sabina; Grioni, Sara; Bardella, Maria T; Agostoni, Carlo; Doneda, Luisa; Brighenti, Furio; Pellegrini, Nicoletta

2016-11-01

To date, it is unclear whether individuals with celiac disease following a gluten-free (GF) diet for several years have adequate intake of all recommended nutrients. Lack of a food frequency questionnaire (FFQ) for individuals with celiac disease could be partly responsible for this still-debated issue. The aim of the study is to evaluate the performance of a modified European Prospective Investigation into Cancer and Nutrition (EPIC) FFQ in estimating nutrient and food intake in a celiac population. In a cross-sectional study, the dietary habits of individuals with celiac disease were reported using a modified Italian EPIC FFQ and were compared to a 7-day weighed food record as a reference method. A total of 200 individuals with histologically confirmed celiac disease were enrolled in the study between October 2012 and August 2014 at the Center for Prevention and Diagnosis of Celiac Disease (Milan, Italy). Nutrient and food category intake were calculated by 7-day weighed food record using an Italian food database integrated with the nutrient composition of 60 GF foods and the modified EPIC FFQ, in which 24 foods were substituted with GF foods comparable for energy and carbohydrate content. An evaluation of the modified FFQ compared to 7-day weighed food record in assessing the reported intake of nutrient and food groups was conducted using Spearman's correlation coefficients and weighted κ. One hundred individuals completed the study. The Spearman's correlation coefficients of FFQ and 7-day weighed food record ranged from .13 to .73 for nutrients and from .23 to .75 for food groups. A moderate agreement, which was defined as a weighted κ value of .40 to .60, was obtained for 30% of the analyzed nutrients, and 40% of the nutrients showed values between .30 and .40. The weighted κ exceeded .40 for 60% of the 15 analyzed food groups. The modified EPIC FFQ demonstrated moderate congruence with a weighed food record in ranking individuals by dietary intakes, particularly food groups. Copyright © 2016 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Lessons learned from the implementation of remote control for the interoperability standard ISO/IEEE11073-20601 in a standard weighing scale.

PubMed

Barrón-González, Héctor Gilberto; Martínez-Espronceda, Miguel; Trigo, Jesús Daniel; Led, Santiago; Serrano, Luis

2016-01-01

The Point of Care (PoC) version of the interoperability standard ISO/IEEE11073 (X73) provided a mechanism to control remotely agents through documents X73-10201 and X73-20301. The newer version of X73 oriented to Personal Health Devices (PHD) has no mechanisms to do such a thing. The authors are working toward a common proposal with the PHD Working Group (PHD-WG) in order to adapt the remote control capabilities from X73PoC to X73PHD. However, this theoretical adaptation has to be implemented and tested to evaluate whether or not its inclusion entails an acceptable overhead and extra cost. Such proof-of-concept assessment is the main objective of this paper. For the sake of simplicity, a weighing scale with a configurable operation was chosen as use case. First, in a previous stage of the research - the model was defined. Second, the implementation methodology - both in terms of hardware and software - was defined and executed. Third, an evaluation methodology to test the remote control features was defined. Then, a thorough comparison between a weighing scale with and without remote control was performed. The results obtained indicate that, when implementing remote control in a weighing scale, the relative weight of such feature represents an overhead of as much as 53%, whereas the number of Implementation Conformance Statements (ICSs) to be satisfied by the manufacturer represent as much as 34% regarding the implementation without remote control. The new feature facilitates remote control of PHDs but, at the same time, increases overhead and costs, and, therefore, manufacturers need to weigh this trade-off. As a conclusion, this proof-of-concept helps in fostering the evolution of the remote control proposal to extend X73PHD and promotes its inclusion as part of the standard, as well as it illustrates the methodological steps for its extrapolation to other specializations. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Validity of self-reported lunch recalls in Swedish school children aged 6-8 years.

PubMed

Hunsberger, Monica; Pena, Pablo; Lissner, Lauren; Grafström, Lisen; Vanaelst, Barbara; Börnhorst, Claudia; Pala, Valeria; Eiben, Gabriele

2013-09-18

Previous studies have suggested that young children are inaccurate reporters of dietary intake. The purpose of this study was to validate a single recall of the previous day's school lunch reported by 6-8 year old Swedish children and to assess teacher-recorded intake of the same meal in a standardized food journal. An additional research question was whether parents could report their child's intake of the previous day's lunch. Subjects constituted a convenience sample from the large, multi-country study Identification and prevention of Dietary- and lifestyle-induced health EFfects In Children and infantS (IDEFICS). Validations of both children's recalls and teachers' records were made by comparing results with the duplicate plate reference method. Twenty-five children (12 boys/13 girls) aged 6-8 years participated in the validation study at one school in western Sweden. Children were accurate self-reporters of their dietary intake at lunch, with no significant difference between reported and weighed intake (Mean difference (SD): 7(50) kcals, p=0.49). Teachers significantly over-reported intake (Mean difference (SD): 65(79) kcals, p=0.01). For both methods, child-reported and teacher-recorded, correlations with weighed intake were strong (Pearson's correlations r=0.92, p<0.001 and r=0.83, p<0.001 respectively). Bland-Altman plots showed strong agreement between child-reported and weighed intakes but confirmed systematic differences between teacher-records and weighed intakes. Foods were recalled by children with a food-match rate of 90%. In all cases parents themselves were unable to report on quantities consumed and only four of 25 children had parents with knowledge regarding food items consumed. Children 6-8 years of age accurately recalled their school lunch intake for one occasion while teachers recorded with less accuracy. Our findings suggest that children as young as six years of age may be better able to report on their dietary intake than previously suggested, at least for one main meal at school. Teacher-recorded intake provides a satisfactory estimate but with greater systematic deviation from the weighed intake. Parents were not able to report on their children's school lunches consumed on the previous day.

[Improvement of local lymph node assay for cosmetics safety evaluation].

PubMed

Liu, Zhen; Liu, Junping; Wang, Fei; Xu, Guifeng; Hou, Juan; Wan, Xuying; Zhang, Tianbao

2009-09-01

To improve the local lymph node assay (LLNA) as an alternative method to detect chemicals for both sensitization and irritation. The following chemicals: one negative control: 4-Aminobenzoic Acid, three sensitizers: 2,4-dinitrochlorobenzene (DNCB), Hexyl cinnamic aldehyde (HCA), 2-Aminophenol (2-APC) and two irritations: potassium hydroxide (KOH), sodium lauryl sulphate (SLS) were selected. According to the normal LLNA, groups of female Balb/c mice were treated with test solutions. The thickness of each ear was measured and each auricle was weighed. On the sixth day, the bilateral draining auricular lymph nodes were excised and weighed. The single cell suspensions were prepared, the lymphocyte were counted and the proliferations of lymph cells were detected by cell counting kit-8 (CCK-8). Significant increase in ear thickness and weight were found in groups of KOH, SLS and DNCB (above 0.5%) (P < 0.05), which could be considered as irritants, whereas irritation were not found in 2-APC and HCA. In the allergic test, three sensitizers showed positive, but different sensitivity were found among each index. HCA, DNCB and 2-APC could all obviously augment the weight of lymph node and the lymphocyte count in different groups (P < 0.05). Conspicuous proliferation of lymphocyte were found in DNCB (all group), HCA (above the middle dose) and 2-APC (high dose) by CCK-8. The reformed LLNA using auricle thickness and weighing as observed markers for irritation, and using lymph nodes weighing and proliferation of lymphocyte as observed markers for sensitization, could evaluate both sensitization and irritation at the same time.

Ground Snow Measurements: Comparisons of the Hotplate, Weighing and Manual Methods

NASA Astrophysics Data System (ADS)

Wettlaufer, A.; Snider, J.; Campbell, L. S.; Steenburgh, W. J.; Burkhart, M.

2015-12-01

The Yankee Environmental Systems (YES) Hotplate was developed to avoid some of the problems associated with weighing snowfall sensors. This work compares Hotplate, weighing sensor (ETI NOAH-II) and manual measurements of liquid-equivalent depth. The main field site was at low altitude in western New York; Hotplate and ETI comparisons were also made at two forested subalpine sites in southeastern Wyoming. The manual measurement (only conducted at the New York site) was derived by weighing snow cores sampled from a snow board. The two recording gauges (Hotplate and ETI) were located within 5 m of the snow board. Hotplate-derived accumulations were corrected using a wind-speed dependent catch efficiency and the ETI orifice was heated and alter shielded. Three important findings are evident from the comparisons: 1) The Yes-derived accumulations, recorded in a user-accessible file, were compared to accumulations derived using an in-house calibration and fundamental measurements (plate power, long and shortwave radiances, wind speed, and temperature). These accumulations are highly correlated (N=24; r2=0.99), but the YES-derived values are larger by 20%. 2) The in-house Hotplate accumulations are in good agreement with ETI-based accumulations but with larger variability (N=24; r2=0.88). 3) The comparison of in-house Hotplate accumulation versus manual accumulation, expressed as mm of liquid, exhibits a fitted linear relationship Y (in-house) versus X (manual) given by Y = -0.2 (±1.4) + 0.9 (±0.1) · X (N= 20; r2=0.89). Thus, these two methods agree within statistical uncertainty.

Design and usability of heuristic-based deliberation tools for women facing amniocentesis.

PubMed

Durand, Marie-Anne; Wegwarth, Odette; Boivin, Jacky; Elwyn, Glyn

2012-03-01

Evidence suggests that in decision contexts characterized by uncertainty and time constraints (e.g. health-care decisions), fast and frugal decision-making strategies (heuristics) may perform better than complex rules of reasoning. To examine whether it is possible to design deliberation components in decision support interventions using simple models (fast and frugal heuristics). The 'Take The Best' heuristic (i.e. selection of a 'most important reason') and 'The Tallying' integration algorithm (i.e. unitary weighing of pros and cons) were used to develop two deliberation components embedded in a Web-based decision support intervention for women facing amniocentesis testing. Ten researchers (recruited from 15), nine health-care providers (recruited from 28) and ten pregnant women (recruited from 14) who had recently been offered amniocentesis testing appraised evolving versions of 'your most important reason' (Take The Best) and 'weighing it up' (Tallying). Most researchers found the tools useful in facilitating decision making although emphasized the need for simple instructions and clear layouts. Health-care providers however expressed concerns regarding the usability and clarity of the tools. By contrast, 7 out of 10 pregnant women found the tools useful in weighing up the pros and cons of each option, helpful in structuring and clarifying their thoughts and visualizing their decision efforts. Several pregnant women felt that 'weighing it up' and 'your most important reason' were not appropriate when facing such a difficult and emotional decision. Theoretical approaches based on fast and frugal heuristics can be used to develop deliberation tools that provide helpful support to patients facing real-world decisions about amniocentesis. © 2011 Blackwell Publishing Ltd.

Transcatheter closure of patent ductus arteriosus in children weighing 10 kg or less: Initial experience at Sohag University Hospital

PubMed Central

Ali, Safaa; El Sisi, Amel

2015-01-01

Aim To assess the challenges, feasibility, and efficacy of device closure of patent ductus arteriosus (PDA) in small children weighing ⩽10 kg for different types of devices used in an initial experience at Sohag University hospital. Methods Between March 2011 and September 2014, 91 patients with PDA underwent transcatheter closure in our institute, among whom 54 weighed ⩽10 kg. All of these patients underwent transcatheter closure of PDA using either a Cook Detachable Coil, PFM Nit-Occlud, or Amplatzer duct occluder. A retrospective review of the treatment results and adverse events was performed. Results Successful device placement was achieved in 53/54 small children (98.1%). The median minimum PDA diameter was 2.4 mm [interquartile range (IQR, 1.8–3.5 mm), median weight 8 kg (IQR, 7–10 kg), and median age 10 months (IQR, 8–17 months)]. Mild aortic obstruction occurred in one case (1.9%), as the device became displaced towards the aorta after release. The device embolized in one case (1.9%) and no retrieval attempt was made. Five cases (9.3%) had minor vascular complications. Conclusion With the current availability of devices for PDA closure, transcatheter closure of PDA is considered safe and efficacious in small children weighing ⩽10 kg with good mid-term outcome. The procedure had a low rate of high-severity adverse events even with the initial experience of the catheterization laboratory. PMID:27053899

The effects of an 'explicit' values clarification exercise in a woman's decision aid regarding postmenopausal hormone therapy.

PubMed

O'Connor, Annette M.; Wells, George A.; Tugwell, Peter; Laupacis, Andreas; Elmslie, Tom; Drake, Elizabeth

1999-03-01

OBJECTIVE: To evaluate the incremental effect of a graphic weigh-scale values clarification exercise to explicitly consider the personal importance of the benefits versus the risks in a woman's decision aid regarding postmenopausal hormone therapy. DESIGN: Randomized controlled trial. Intervention Decision aid including information on options, benefits and risks, and their probabilities either followed by: (1) a graphic weigh-scale values clarification exercise to explicitly consider the personal importance of each benefit and risk; or (2) a summary of the main benefits and risks to implicitly consider benefits versus the risks. SAMPLE: Two-hundred and one women aged 50-69 years from Ottawa, Canada, who had never used hormone therapy. OUTCOME: Perceived clarity of values, a sub-scale of the decisional conflict scale; congruence between personal values of benefits and risks (measured on 0-10 importance rating scale) and choices (accept, decline, unsure regarding preventive hormone therapy [HRT]) using discriminant function analysis. RESULTS: There were no statistically significant differences between interventions in perceived clarity of values and overall congruence between values and choices. Amongst those choosing HRT, there was a trend in those exposed to the graphic weigh-scale exercise to have better congruence between values and choices compared to implicit values clarification (P = 0.06). CONCLUSION: The use of the graphic weigh-scale exercise in a decision aid conveys no overall short-term benefit. Further study is needed to specifically determine effects in those changing the status quo and on the quality of patient-practitioner communication and persistence with decisions.

Apparatus for weighing and identifying characteristics of a moving vehicle

DOEpatents

Muhs, Jeffrey D.; Jordan, John K.; Tobin, Jr., Kenneth W.; LaForge, John V.

1993-01-01

Apparatus for weighing a vehicle in motion is provided by employing a plurality of elongated fiber-optic sensors defined by an optical fiber embedded in an encasement of elastomeric material and disposed parallel to each other on the roadway in the path of moving vehicles. Each fiber-optic sensor is provided with contact grid means which can be selectively altered to provide the fiber-optic sensors with sensitivities to vehicular weight different from each other for weighing vehicles in an extended weight range. Switch means are used in conjunction with the fiber-optic sensors to provide signals indicative of the speed of the moving vehicle, the number of axles on the vehicle, weight distribution, tire position, and the wheelbase of the vehicle. The use of a generally N-shaped configuration of switch means also provides a determination of the number of tires on each axle and the tire footprint. When switch means in this configuration are formed of optical fibers, the extent of light transmission through the fibers during contact with the tires of the vehicle is indicative of the vehicle weight.

Lessons for health care rationing from the case of child B.

PubMed

Price, D

1996-01-20

More details have emerged about the child B leukaemia case with the publication of the All England Law Report on the Appeal Court decision. At the time the view was widely held that the controversy might have been avoided if the responsible health authority had consulted the public. The law report reveals, however, that the courts adopted a moral language widely at variance with that of the patient's doctor. The courts were concerned to support a utilitarian decision procedure based on calculations of the greatest overall good; the doctor was concerned with the best interests of a sick child. The doctor-patient relationship may be damaged when public consideration transforms the issue in this way. Also, the Appeal Court supported a decision which claimed to have "weighed" opposing evaluations, but it excused the health authority from describing how that weighing took place. One of the main criticisms of the utilitarian approach, however, is that weighing of this type is extremely difficult to justify. By its ruling the court has made legal challenge on the grounds of inadequate consultation virtually impossible to substantiate.

Lessons for health care rationing from the case of child B.

PubMed Central

Price, D.

1996-01-01

More details have emerged about the child B leukaemia case with the publication of the All England Law Report on the Appeal Court decision. At the time the view was widely held that the controversy might have been avoided if the responsible health authority had consulted the public. The law report reveals, however, that the courts adopted a moral language widely at variance with that of the patient's doctor. The courts were concerned to support a utilitarian decision procedure based on calculations of the greatest overall good; the doctor was concerned with the best interests of a sick child. The doctor-patient relationship may be damaged when public consideration transforms the issue in this way. Also, the Appeal Court supported a decision which claimed to have "weighed" opposing evaluations, but it excused the health authority from describing how that weighing took place. One of the main criticisms of the utilitarian approach, however, is that weighing of this type is extremely difficult to justify. By its ruling the court has made legal challenge on the grounds of inadequate consultation virtually impossible to substantiate. Images p168-a PMID:8563539

Apparatus for weighing and identifying characteristics of a moving vehicle

DOEpatents

Muhs, J.D.; Jordan, J.K.; Tobin, K.W. Jr.; LaForge, J.V.

1993-11-09

Apparatus for weighing a vehicle in motion is provided by employing a plurality of elongated fiber-optic sensors defined by an optical fiber embedded in an encasement of elastomeric material and disposed parallel to each other on the roadway in the path of moving vehicles. Each fiber-optic sensor is provided with contact grid means which can be selectively altered to provide the fiber-optic sensors with sensitivities to vehicular weight different from each other for weighing vehicles in an extended weight range. Switch means are used in conjunction with the fiber-optic sensors to provide signals indicative of the speed of the moving vehicle, the number of axles on the vehicle, weight distribution, tire position, and the wheelbase of the vehicle. The use of a generally N-shaped configuration of switch means also provides a determination of the number of tires on each axle and the tire footprint. When switch means in this configuration are formed of optical fibers, the extent of light transmission through the fibers during contact with the tires of the vehicle is indicative of the vehicle weight. 15 figures.

Uncertainty contribution on the density of liquids due to unknown sinker temperature in hydrostatic weighing apparatus

NASA Astrophysics Data System (ADS)

Schiebl, M.; Zelenka, Z.; Buchner, C.; Pohl, R.; Steindl, D.

2018-02-01

In this study, the influence of the unknown sinker temperature on the measured density of liquids is evaluated. Generally, due to the intrinsic temperature instability of the heat bath temperature controller, the system will never reach thermal equilibrium but instead will oscillate around a mean temperature. The sinker temperature follows this temperature oscillation with a certain time lag. Since the sinker temperature is not measured directly in a hydrostatic weighing apparatus, the temperature of the sinker, and thus in turn the volume of the sinker, is not known exactly. As a consequence, this leads to uncertainty in the value of the density of the liquid. From an analysis of the volume relaxation of the sinker immersed into a heat bath with time-dependent temperature characteristics, the heat transfer coefficient can be estimated, and thus a characteristic time constant for achieving quasi thermal equilibrium for a hydrostatic weighing apparatus is proposed. Additionally, from a theoretical analysis of the transient behavior of the sinker volume, the systematic deviation of the theoretical to the actual measured liquid density is calculated.

Titanium microgram weight low to 50 mg and measurement based on exchange weighing method

NASA Astrophysics Data System (ADS)

Ren, Xiaoping; Dong, Lei; Wang, Jian; Wang, Xiaolei

2017-03-01

The microgram weights have wide applications in the mechanical testing of nano- and bio-material sensors. They are increasing the requirement of small force and mass below 1 mg among the researchers, industry and bio-pharmaceutical manufacturing. In this paper, the current research status is presented, both from the measurement method and manufacture of microgram weights. The commonly used material for micro-weights is stainless steel and aluminum. Now NIM has developed another kind of microgram weights with titanium alloy. For the reason that it has smaller size than normal material like aluminum, special designed exchange weighing pan was used in measurement, which solved the problems that the weighing hooks cannot carry up and down the wire shape microgram weight. Then this kind of microgram weights was tested in subdivision measurement on an automatic mass comparator. It showed good performance in the experiment, which extends the choice for the industrial and metrological user. The uncertainty evaluation of micro-weight values range from 0.05 mg to 0.5 mg with standard uncertainty between 0.2 g and 0.1 μg.

Modifications in endoscopic practice for pediatric patients.

PubMed

Lightdale, Jenifer R; Acosta, Ruben; Shergill, Amandeep K; Chandrasekhara, Vinay; Chathadi, Krishnavel; Early, Dayna; Evans, John A; Fanelli, Robert D; Fisher, Deborah A; Fonkalsrud, Lisa; Hwang, Joo Ha; Kashab, Mouen; Muthusamy, V Raman; Pasha, Shabana; Saltzman, John R; Cash, Brooks D

2014-05-01

We recommend that endoscopy in children be performed by pediatric-trained endoscopists whenever possible. We recommend that adult-trained endoscopists coordinate their services with pediatricians and pediatric specialists when they are needed to perform endoscopic procedures in children. We recommend that endoscopy be performed within 24 hours in symptomatic pediatric patients with known or suspected ingestion of caustic substances. We recommend emergent foreign-body removal of esophageal button batteries, as well as 2 or more rare-earth neodymium magnets. We recommend that procedural and resuscitative equipment appropriate for pediatric use should be readily available during endoscopic procedures. We recommend that personnel trained specifically in pediatric life support and airway management be readily available during sedated procedures in children. We recommend the use of endoscopes smaller than 6 mm in diameter in infants and children weighing less than 10 kg. We recommend the use of standard adult duodenoscopes for performing ERCP in children who weigh at least 10 kg. We recommend the placement of 12F or 16F percutaneous endoscopic gastrostomy tubes in children who weigh less than 50 kg.

Shared mechanisms of perceptual learning and decision making.

PubMed

Law, Chi-Tat; Gold, Joshua I

2010-04-01

Perceptual decisions require the brain to weigh noisy evidence from sensory neurons to form categorical judgments that guide behavior. Here we review behavioral and neurophysiological findings suggesting that at least some forms of perceptual learning do not appear to affect the response properties of neurons that represent the sensory evidence. Instead, improved perceptual performance results from changes in how the sensory evidence is selected and weighed to form the decision. We discuss the implications of this idea for possible sites and mechanisms of training-induced improvements in perceptual processing in the brain. Copyright © 2009 Cognitive Science Society, Inc.

Centre of mass determination based on an optical weighing machine using fiber Bragg gratings

NASA Astrophysics Data System (ADS)

Oliveira, Rui; Roriz, Paulo; Marques, Manuel B.; Frazão, Orlando

2015-09-01

The purpose of the present work was to construct a weighing machine based on fiber Bragg gratings (FBGs) for the location of the 2D coordinates of the center of gravity (COG) of objects with complex geometry and density distribution. The apparatus consisted of a rigid equilateral triangular platform mounted on three supports at its vertices, two of them having cantilevers instrumented with FBGs. As an example, two femur bone models, one with and one without a hip stem prosthesis, are used to discuss the changing of the COM caused by the implementation of the prosthesis.

Stochastic scheduling on a repairable manufacturing system

NASA Astrophysics Data System (ADS)

Li, Wei; Cao, Jinhua

1995-08-01

In this paper, we consider some stochastic scheduling problems with a set of stochastic jobs on a manufacturing system with a single machine that is subject to multiple breakdowns and repairs. When the machine processing a job fails, the job processing must restart some time later when the machine is repaired. For this typical manufacturing system, we find the optimal policies that minimize the following objective functions: (1) the weighed sum of the completion times; (2) the weighed number of late jobs having constant due dates; (3) the weighted number of late jobs having random due dates exponentially distributed, which generalize some previous results.

7. This photographic copy of an engineering drawing displays the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. This photographic copy of an engineering drawing displays the building's floor plan in its 1995 arrangement, with rooms designated. California Institute of Technology, Jet Propulsion Laboratory, Facilities Engineering and Construction Office, "Addition to Weigh & Control Bldg. E-35, Demolition, Floor and Roof Plans," drawing no. E35/3-0, October 5, 1983. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: engineering drawings of structures at JPL Edwards Facility. Drawings on file at JPL Plant Engineering, Pasadena, California. - Jet Propulsion Laboratory Edwards Facility, Weigh & Control Building, Edwards Air Force Base, Boron, Kern County, CA

[Measurement of human body fat by means of gravimetry. Application of Archimedes' principle].

PubMed

Dettwiler, W; Ribordy, M; Donath, A; Scherrer, J R

1978-12-02

The weighing of the human body under water is an application of Archimedes' law. Fat being lighter than water or than the structures of lean body mass, body fat can be measured by determining the specific gravity of the human body; that is, by underwater weighing. Body fat has been determined in an "ideal" sample of 14 men and 23 women, all aged 20 years. Testing against a reference measure of body fat makes it possible to test the validity of some anthropometric measurements and of some indices of obesity. These indices offer no advantages over anthropometric measurements.

Hydrogen slush density reference system

NASA Technical Reports Server (NTRS)

Weitzel, D. H.; Lowe, L. T.; Ellerbruch, D. A.; Cruz, J. E.; Sindt, C. F.

1971-01-01

A hydrogen slush density reference system was designed for calibration of field-type instruments and/or transfer standards. The device is based on the buoyancy principle of Archimedes. The solids are weighed in a low-mass container so arranged that solids and container are buoyed by triple-point liquid hydrogen during the weighing process. Several types of hydrogen slush density transducers were developed and tested for possible use as transfer standards. The most successful transducers found were those which depend on change in dielectric constant, after which the Clausius-Mossotti function is used to relate dielectric constant and density.

Multi-CubeSat Deployment Strategies: How Different Satellite Deployment Schemes Affect Satellite Separation and Detection for Various Types of Constellations and Missions

DTIC Science & Technology

2016-03-24

2009.1 107 of the 158 satellites launched are operated by commercial entities.1 In early 2015, SpaceX and OneWeb each announced their plans to deploy...very large constellations of small satellites ( SpaceX – 4025, OneWeb – 648).1 Each of the OneWeb satellites is planned to weigh around 150 kg,12...while SpaceX expects their satellites to weigh several hundred kilograms each.13 Clearly, the growth in the use of small satellites is causing, and will

Demystifying RPA Operations Post OEF: Now is the Time for the USAF ISR Team to Enhance Multilateral Partnership Across COCOMs and Reverse the Tide of Public Opinion Toward Intelligence Gathering and Kinetic RPA Strikes

DTIC Science & Technology

2013-04-03

Drone Practices in Pakistan (September, 2012), http://livingunderdrones.org. V. 10 Ibid., 136 -137. 11 Ibid. 12 Baldor, Lolita C., “Military...http://cnn.com. 3. 31 Baldor, Lolita C., “Military Weighs Cutbacks, Shifts in Drone Programs,” adn.com, 02 Feb 2013, www.adn.com...Piloted ISR Aircraft.” Air and Space Power Journal, (Spring 2011): 45. 35 Ibid., 46. 36 Baldor, Lolita C., “Military Weighs Cutbacks, Shifts in

A laboratory evaluation of the influence of weighing gauges performance on extreme events statistics

NASA Astrophysics Data System (ADS)

Colli, Matteo; Lanza, Luca

2014-05-01

The effects of inaccurate ground based rainfall measurements on the information derived from rain records is yet not much documented in the literature. La Barbera et al. (2002) investigated the propagation of the systematic mechanic errors of tipping bucket type rain gauges (TBR) into the most common statistics of rainfall extremes, e.g. in the assessment of the return period T (or the related non-exceedance probability) of short-duration/high intensity events. Colli et al. (2012) and Lanza et al. (2012) extended the analysis to a 22-years long precipitation data set obtained from a virtual weighing type gauge (WG). The artificial WG time series was obtained basing on real precipitation data measured at the meteo-station of the University of Genova and modelling the weighing gauge output as a linear dynamic system. This approximation was previously validated with dedicated laboratory experiments and is based on the evidence that the accuracy of WG measurements under real world/time varying rainfall conditions is mainly affected by the dynamic response of the gauge (as revealed during the last WMO Field Intercomparison of Rainfall Intensity Gauges). The investigation is now completed by analyzing actual measurements performed by two common weighing gauges, the OTT Pluvio2 load-cell gauge and the GEONOR T-200 vibrating-wire gauge, since both these instruments demonstrated very good performance under previous constant flow rate calibration efforts. A laboratory dynamic rainfall generation system has been arranged and validated in order to simulate a number of precipitation events with variable reference intensities. Such artificial events were generated basing on real world rainfall intensity (RI) records obtained from the meteo-station of the University of Genova so that the statistical structure of the time series is preserved. The influence of the WG RI measurements accuracy on the associated extreme events statistics is analyzed by comparing the original intensity-duration-frequency (IDF) curves with those obtained from the measuring of the simulated rain events. References: Colli, M., L.G. Lanza, and P. La Barbera, (2012). Weighing gauges measurement errors and the design rainfall for urban scale applications, 9th International Workshop On Precipitation In Urban Areas, 6-9 December, 2012, St. Moritz, Switzerland Lanza, L.G., M. Colli, and P. La Barbera (2012). On the influence of rain gauge performance on extreme events statistics: the case of weighing gauges, EGU General Assembly 2012, April 22th, Wien, Austria La Barbera, P., L.G. Lanza, and L. Stagi, (2002). Influence of systematic mechanical errors of tipping-bucket rain gauges on the statistics of rainfall extremes. Water Sci. Techn., 45(2), 1-9.

Assessing the impact of adolescent pregnancy and the premarital conception stress complex on birth weight among young mothers in Gibraltar's civilian community.

PubMed

Sawchuk, L A; Burke, S D; Benady, S

1997-10-01

The objective of this study was to assess the impact of young maternal age and the timing of conception on birth weight among primiparous women living in Gibraltar. The data for this study were derived from a population of 295 primiparous women who gave birth under 25 years of age. Only married women who had no previous maternal history and delivered live singleton newborns between 1980 and 1984 were included. The confounding effects of gestation length, sex, and socio-economic status on birth weight were taken into account using the multivariate technique of multiple classification analysis. A conception timing variable was constructed and partitioned into four groups which represented the separate and joint effects of maternal age and prenuptial stress on birth weight. The overall mean birth weight was 3344.15 g. After controlling for the specified factors and covariate, the infants of older mother (> 19) who conceived after marriage weighed 57.78 g above the referent group mean. Older mothers who conceived a child before marriage delivered infants weighing 75.67 below the grand mean. Young mother (< 20) who conceived within marriage had infants who weighed 37.32 g less than the grand mean. Infants delivered by young mothers who conceived before marriage weighed 133.66 g less than the overall mean birth weight. The only significant group difference detected within the conception timing variable was between young mothers who conceived before marriage versus older mothers who conceived after marriage. Premarital conception is identified as a risk factor for lower infant birth weights among mothers under 20 years of age. This study emphasizes the need to take into account the effects of culturally mediated behavior on the pregnancy experience of young women.

Evaluation of Sensible Heat Flux and Evapotranspiration Estimates Using a Surface Layer Scintillometer and a Large Weighing Lysimeter

PubMed Central

Moorhead, Jerry E.; Marek, Gary W.; Colaizzi, Paul D.; Gowda, Prasanna H.; Evett, Steven R.; Brauer, David K.; Marek, Thomas H.; Porter, Dana O.

2017-01-01

Accurate estimates of actual crop evapotranspiration (ET) are important for optimal irrigation water management, especially in arid and semi-arid regions. Common ET sensing methods include Bowen Ratio, Eddy Covariance (EC), and scintillometers. Large weighing lysimeters are considered the ultimate standard for measurement of ET, however, they are expensive to install and maintain. Although EC and scintillometers are less costly and relatively portable, EC has known energy balance closure discrepancies. Previous scintillometer studies used EC for ground-truthing, but no studies considered weighing lysimeters. In this study, a Surface Layer Scintillometer (SLS) was evaluated for accuracy in determining ET as well as sensible and latent heat fluxes, as compared to a large weighing lysimeter in Bushland, TX. The SLS was installed over irrigated grain sorghum (Sorghum bicolor (L.) Moench) for the period 29 July–17 August 2015 and over grain corn (Zea mays L.) for the period 23 June–2 October 2016. Results showed poor correlation for sensible heat flux, but much better correlation with ET, with r2 values of 0.83 and 0.87 for hourly and daily ET, respectively. The accuracy of the SLS was comparable to other ET sensing instruments with an RMSE of 0.13 mm·h−1 (31%) for hourly ET; however, summing hourly values to a daily time step reduced the ET error to 14% (0.75 mm·d−1). This level of accuracy indicates that potential exists for the SLS to be used in some water management applications. As few studies have been conducted to evaluate the SLS for ET estimation, or in combination with lysimetric data, further evaluations would be beneficial to investigate the applicability of the SLS in water resources management. PMID:29036926

Study protocol: the effectiveness and cost effectiveness of a brief behavioural intervention to promote regular self-weighing to prevent weight regain after weight loss: randomised controlled trial (The LIMIT Study).

PubMed

Madigan, Claire D; Jolly, Kate; Roalfe, Andrea; Lewis, Amanda L; Webber, Laura; Aveyard, Paul; Daley, Amanda J

2015-06-04

Although obesity causes many adverse health consequences, modest weight loss reduces the incidence. There are effective interventions that help people to lose weight but weight regain is common and long term maintenance remains a critical challenge. As a high proportion of the population of most high and middle income countries are overweight, there are many people who would benefit from weight loss and its maintenance. Therefore, we need to find effective low cost scalable interventions to help people achieve this. One such intervention that has shown promise is regular self-weighing, to check progress against a target, however there is no trial that has tested this using a randomised controlled design (RCT). The aim of this RCT is to evaluate the effectiveness and cost effectiveness of a brief behavioural intervention delivered by non-specialist staff to promote regular self-weighing to prevent weight regain after intentional weight loss. A randomised trial of 560 adults who have lost ≥ 5 % of their initial body weight through a 12 week weight loss programme. The comparator group receive a weight maintenance leaflet, a diagram representing healthy diet composition, and a list of websites for weight control. The intervention group receive the same plus minimally trained telephonists will ask participants to set a weight target and encourage them to weigh themselves daily, and provide support materials such as a weight record card. The primary outcome is the difference between groups in weight change from baseline to 12 months. If effective, this study will provide public health agencies with a simple, low cost maintenance intervention that could be implemented immediately. ISRCTN52341938 Date Registered: 31/03/2014.

A novel method to remotely measure food intake of free-living people in real-time

PubMed Central

Martin, Corby K.; Han, Hongmei; Coulon, Sandra M.; Allen, H. Raymond; Champagne, Catherine M.; Anton, Stephen D.

2008-01-01

The aim of this study was to report the first reliability and validity tests of the Remote Food Photography Method (RFPM), which consists of camera-enabled cell phones with data transfer capability. Participants take and transmit photographs of food selection and plate waste to researchers/clinicians for analysis. Following two pilot studies, adult participants (N=52, 20≤BMI≤35) were randomly assigned to the dine-in or take-out group. Energy intake (EI) was measured for three days. The dine-in group ate lunch and dinner in the laboratory. The take-out group ate lunch in the laboratory and dinner in free-living conditions (participants received a cooler with pre-weighed food that they returned the following morning). Energy intake was measured with the RFPM and by directly weighing foods. The RFPM was tested in laboratory and free-living conditions. Reliability was tested over three days and validity was tested by comparing directly weighed EI to EI estimated with the RFPM using Bland-Altman analysis. The RFPM produced reliable EI estimates over three days in laboratory (r=.62, p<.0001) and free-living (r=.68, p<.0001) conditions. Weighed EI correlated highly with EI estimated with the RFPM in laboratory and free-living conditions (r’s>.93, p<.0001). In two laboratory-based validity tests, the RFPM underestimated EI by -4.7% (p=.046) and -5.5% (p=.076). In free-living conditions, the RFPM underestimated EI by -6.6% (p=.017). Bias did not differ by body weight or age. The RFPM is a promising new method for accurately measuring the EI of free-living people. Error associated with the method is small compared to self-report methods. PMID:18616837

A novel method to remotely measure food intake of free-living individuals in real time: the remote food photography method.

PubMed

Martin, Corby K; Han, Hongmei; Coulon, Sandra M; Allen, H Raymond; Champagne, Catherine M; Anton, Stephen D

2009-02-01

The aim of the present study was to report the first reliability and validity tests of the remote food photography method (RFPM), which consists of camera-enabled cell phones with data transfer capability. Participants take and transmit photographs of food selection and plate waste to researchers/clinicians for analysis. Following two pilot studies, adult participants (n 52; BMI 20-35 kg/m2 inclusive) were randomly assigned to the dine-in or take-out group. Energy intake (EI) was measured for 3 d. The dine-in group ate lunch and dinner in the laboratory. The take-out group ate lunch in the laboratory and dinner in free-living conditions (participants received a cooler with pre-weighed food that they returned the following morning). EI was measured with the RFPM and by directly weighing foods. The RFPM was tested in laboratory and free-living conditions. Reliability was tested over 3 d and validity was tested by comparing directly weighed EI to EI estimated with the RFPM using Bland-Altman analysis. The RFPM produced reliable EI estimates over 3 d in laboratory (r 0.62; P < 0.0001) and free-living (r 0.68; P < 0.0001) conditions. Weighed EI correlated highly with EI estimated with the RFPM in laboratory and free-living conditions (r>0.93; P < 0.0001). In two laboratory-based validity tests, the RFPM underestimated EI by - 4.7 % (P = 0.046) and - 5.5 % (P = 0.076). In free-living conditions, the RFPM underestimated EI by - 6.6 % (P = 0.017). Bias did not differ by body weight or age. The RFPM is a promising new method for accurately measuring the EI of free-living individuals. Error associated with the method is small compared with self-report methods.

Weighing the evidence of ecological risk from chemical contamination in the estuarine environment adjacent to the Portsmouth Naval Shipyard, Kittery, Maine, USA.

PubMed

Johnston, Robert K; Munns, Wayne R; Tyler, Patti Lynne; Marajh-Whittemore, Patty; Finkelstein, Kenneth; Munney, Kenneth; Short, Fred T; Melville, Ann; Hahn, Simeon P

2002-01-01

In characterizing ecological risks, considerable consensus building and professional judgments are required to develop conclusions about risk. This is because how to evaluate all the factors that determine ecological risk is not well defined and is subject to interpretation. Here we report on the application of a procedure to weigh the evidence of ecological risk and develop conclusions about risk that will incorporate the strengths and weaknesses of the assessment. The procedure was applied to characterize ecological risk of chemical contamination in nearshore areas adjacent to the Portsmouth Naval Shipyard, located at the mouth of the Great Bay Estuary, New Hampshire and Maine, USA. Measures of exposure and effect were used to interpret the magnitude of risk to the assessment endpoints of pelagic species, epibenthic species, the benthic community, eelgrass plants, the salt marsh community, and avian receptors. The evidence of chemical exposure from water, sediment, and tissue and the evidence of biological effects to representative pelagic, epibenthic, benthic, eelgrass, salt marsh, and avian species were weighed to characterize ecological risk. Individual measures were weighted by the quality and reliability of their data and risk was estimated from the preponderance, magnitude, extent, and strength of causal relationships between the data on exposure and effects. Relating evidence of risk to hypothesized pathways of exposure made it possible to estimate the magnitude of risk from sediment and water and express the confidence associated with the findings. Systematically weighing the evidence of risk rendered conclusions about risk in a manner that was clearly defined, objective, consistent, and did not rely solely on professional judgment.

Processing and comparison of two weighing lysimeters at the Rietholzbach catchment

NASA Astrophysics Data System (ADS)

Ruth, Conall; Michel, Dominik; Hirschi, Martin; Seneviratne, Sonia I.

2017-04-01

Weighing lysimeters are a well-established means of accurately obtaining local-scale estimates of actual evapotranspiration and seepage within soils. Current state-of-the-art devices have very high temporal resolutions and weighing precisions, and can also be used to estimate precipitation. These, however, require complex filtering to first remove noise (e.g. resulting from wind influence) from the mass measurements. At the Rietholzbach research catchment in northeastern Switzerland, two weighing lysimeters are in operation. One is a recently-installed state-of-the-art mini-lysimeter with a pump-controlled lower boundary; the other is a large free-drainage lysimeter in operation since 1976. To determine the optimal processing approach for the mini-lysimeter, a number of reported approaches were applied, with the resulting evapotranspiration and precipitation records being compared to those of the large lysimeter and a tipping bucket, respectively. Out of those examined, we found the Adaptive-Window and Adaptive-Threshold (AWAT) filter and a similar, non-adaptive approach, to perform best. Using the AWAT-filtered mini-lysimeter data as a reference, additional, retrospectively-applicable processing steps for the large lysimeter were then investigated. Those found to be most beneficial were the application of a three-point (10-min) moving mean to the mass measurements, and the setting-to-zero of estimated evapotranspiration and condensation in hours with greater-than-zero reference tipping bucket precipitation recordings. A comparison of lysimeter mass increases associated with precipitation revealed that the large lysimeter experiences a previously unknown under-catch of 11.1% (for liquid precipitation). Daily seepage measurements were found to be generally greater from the mini-lysimeter, probably reflecting the reduced input of water to the large lysimeter due to this under-catch.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abercrombie, Robert K; Buckner Jr, Dooley; Newton, David D

The Oak Ridge National Laboratory (ORNL) Weigh-In-Motion (WIM) system provides a portable and/or semi-portable means of accurately weighing vehicles and its cargo as each vehicle crosses the scales (while in motion), and determining (1) axle weights and (2) axle spacing for vehicles (for determination of Bridge Formula compliance), (3) total vehicle/cargo weight and (4) longitudinal center of gravity (for safety considerations). The WIM system can also weigh the above statically. Because of the automated nature of the WIM system, it eliminates the introduction of human errors caused by manual computations and data entry, adverse weather conditions, and stress. Individual vehiclesmore » can be weighed continuously at low speeds (approximately 3-10 mph) and at intervals of less than one minute. The ORNL WIM system operates and is integrated into the Bethel Jacobs Company Transportation Management and Information System (TMIS, a Radio-Frequency Identification [RFID] enabled information system). The integrated process is as follows: Truck Identification Number and Tare Weight are programmed into a RFID Tag. Handheld RFID devices interact with the RFID Tag, and Electronic Shipping Document is written to the RFID Tag. The RFID tag read by an RFID tower identifies the vehicle and its associated cargo, the specific manifest of radioactive debris for the uniquely identified vehicle. The weight of the cargo (in this case waste debris) is calculated from total vehicle weight information supplied from WIM to TMIS and is further processed into the Information System and kept for historical and archival purposes. The assembled data is the further process in downstream information systems where waste coordination activities at the Y-12 Environmental Management Waste Management Facility (EMWMF) are written to RFID Tag. All cycle time information is monitored by Transportation Operations and Security personnel.« less

Weight Loss Strategies Associated With BMI in Overweight Adults With Type 2 Diabetes at Entry Into the Look AHEAD (Action for Health in Diabetes) Trial

PubMed Central

Raynor, Hollie A.; Jeffery, Robert W.; Ruggiero, Andrea M.; Clark, Jeanne M.; Delahanty, Linda M.

2008-01-01

OBJECTIVE—Intentional weight loss is recommended for those with type 2 diabetes, but the strategies patients attempt and their effectiveness for weight management are unknown. In this investigation we describe intentional weight loss strategies used and those related to BMI in a diverse sample of overweight participants with type 2 diabetes at enrollment in the Look AHEAD (Action for Health in Diabetes) clinical trial. RESEARCH DESIGN AND METHODS—This was a cross-sectional study of baseline weight loss strategies, including self-weighing frequency, eating patterns, and weight control practices, reported in 3,063 women and 2,082 men aged 45–74 years with BMI ≥25 kg/m2. RESULTS—Less than half (41.4%) of participants self-weighed ≥1/week. Participants ate breakfast 6.0 ± 1.8 days/week, ate 5.0 ± 3.1 meals/snacks per day, and ate 1.9 ± 2.7 fast food meals/week. The three most common weight control practices (increasing fruits and vegetables, cutting out sweets, and eating less high-carbohydrate foods) were reported by ∼60% of participants for ≥20 weeks over the previous year. Adjusted models showed that self-weighing less than once per week (B = 0.83), more fast food meals consumed per week (B = 0.14), and fewer breakfast meals consumed per week (B = −0.19) were associated (P < 0.05) with a higher BMI (R2 = 0.24). CONCLUSIONS—Regular self-weighing and breakfast consumption, along with infrequent consumption of fast food, were related to lower BMI in the Look AHEAD study population. PMID:18375417

Outcomes of systemic to pulmonary artery shunts in patients weighing less than 3 kg: analysis of shunt type, size, and surgical approach.

PubMed

Myers, John W; Ghanayem, Nancy S; Cao, Yumei; Simpson, Pippa; Trapp, Katie; Mitchell, Michael E; Tweddell, James S; Woods, Ronald K

2014-02-01

To evaluate outcomes of systemic to pulmonary artery shunts (SPS) in patients weighing less than 3 kg with regard to shunt type, shunt size, and surgical approach. Patients weighing less than 3 kg who underwent modified Blalock-Taussig or central shunts with polytetrafluoroethylene grafts at our institution from January 1, 2000, to May 31, 2011, were reviewed. Patients who had undergone other major concomitant procedures were excluded from the analysis. Primary outcomes included mortality (discharge mortality and mortality before next planned palliative procedure or definitive repair), cardiac arrest and/or extracorporeal membrane oxygenation (ECMO), and shunt reintervention. In this cohort of 80 patients, discharge survival was 96% (77/80). Postoperative cardiac arrest or ECMO occurred in 6/80 (7.5%), and shunt reintervention was required in 14/80 (17%). On univariate analysis, shunt reintervention was more common in patients with 3-mm shunts (11/30, 37%) compared with 3.5-mm (2/36, 6%) or 4-mm shunts (1/14, 7%) (P < .003). There were no statistically significant associations between shunt type, shunt size, or surgical approach and cardiac arrest/ECMO or mortality. Multiple logistic regression demonstrated that a shunt size of 3 mm (P = .019) and extracardiac anomaly (P = .047) were associated with shunt reintervention, whereas no variable was associated with cardiac arrest/ECMO or mortality. In this high-risk group of neonates weighing less than 3 kg at the time of SPS, survival to discharge and the next planned surgical procedure was high. Outcomes were good with the 3.5- and 4-mm shunts; however, shunt reintervention was common with 3-mm shunts. Copyright © 2014 The American Association for Thoracic Surgery. Published by Mosby, Inc. All rights reserved.

Hemolysis During Open-Heart Surgery With Vacuum-Assisted Venous Drainage at Different Negative Pressures in Pediatric Patients Weighing Less Than 10 kilograms.

PubMed

Kwak, Jae Gun; Lee, Jinkwon; Park, Minkyoung; Seo, Yu-Jin; Lee, Chang-Ha

2017-03-01

This study examined the degree of hemolysis during vacuum-assisted venous drainage at different negative pressures to identify an adequate negative pressure that provides effective venous drainage without significant hemolysis in open-heart surgery in children weighing less than 10 kg. Patients weighing less than 10 kg who underwent surgery for ventricular septal defect or atrial septal defect from 2011 to 2014 were enrolled. We used one of four negative pressures (20, 30, 40, or 60 mm Hg) for each patient. We measured haptoglobin, plasma hemoglobin, aspartate aminotransferase, and lactate dehydrogenase levels in the patients' blood three times perioperatively and determined the potential correlation between the change in each parameter with the level of negative pressure. Forty-six patients were enrolled in this study (mean age: 7.1 ± 7.0 months, mean body weight: 6.1 ± 1.8 kg). There were no significant differences according to the degree of negative pressure with respect to patient age, body weight, cardiopulmonary bypass (CPB) time, aorta cross-clamping time, blood flow during CPB, or lowest body temperature. All parameters that we measured reflected progression of hemolysis during CPB; however, the degree of change in the parameters did not correlate with negative pressure. In pediatric patients weighing less than 10 kg, the change in the degree of hemolysis did not differ with the amount of negative pressure. We may apply negative pressures up to 60 mm Hg without increasing the risk of hemolysis, with almost same the level of hemolysis using negative pressures of 20, 30, and 40 mm Hg for effective venous drainage and an ideal operative field during open-heart surgery.

Design and usability of heuristic‐based deliberation tools for women facing amniocentesis

PubMed Central

Durand, Marie‐Anne; Wegwarth, Odette; Boivin, Jacky; Elwyn, Glyn

2011-01-01

Abstract Background  Evidence suggests that in decision contexts characterized by uncertainty and time constraints (e.g. health‐care decisions), fast and frugal decision‐making strategies (heuristics) may perform better than complex rules of reasoning. Objective  To examine whether it is possible to design deliberation components in decision support interventions using simple models (fast and frugal heuristics). Design  The ‘Take The Best’ heuristic (i.e. selection of a ‘most important reason’) and ‘The Tallying’ integration algorithm (i.e. unitary weighing of pros and cons) were used to develop two deliberation components embedded in a Web‐based decision support intervention for women facing amniocentesis testing. Ten researchers (recruited from 15), nine health‐care providers (recruited from 28) and ten pregnant women (recruited from 14) who had recently been offered amniocentesis testing appraised evolving versions of ‘your most important reason’ (Take The Best) and ‘weighing it up’ (Tallying). Results  Most researchers found the tools useful in facilitating decision making although emphasized the need for simple instructions and clear layouts. Health‐care providers however expressed concerns regarding the usability and clarity of the tools. By contrast, 7 out of 10 pregnant women found the tools useful in weighing up the pros and cons of each option, helpful in structuring and clarifying their thoughts and visualizing their decision efforts. Several pregnant women felt that ‘weighing it up’ and ‘your most important reason’ were not appropriate when facing such a difficult and emotional decision. Conclusion  Theoretical approaches based on fast and frugal heuristics can be used to develop deliberation tools that provide helpful support to patients facing real‐world decisions about amniocentesis. PMID:21241434

Evaluation of Sensible Heat Flux and Evapotranspiration Estimates Using a Surface Layer Scintillometer and a Large Weighing Lysimeter.

PubMed

Moorhead, Jerry E; Marek, Gary W; Colaizzi, Paul D; Gowda, Prasanna H; Evett, Steven R; Brauer, David K; Marek, Thomas H; Porter, Dana O

2017-10-14

Accurate estimates of actual crop evapotranspiration (ET) are important for optimal irrigation water management, especially in arid and semi-arid regions. Common ET sensing methods include Bowen Ratio, Eddy Covariance (EC), and scintillometers. Large weighing lysimeters are considered the ultimate standard for measurement of ET, however, they are expensive to install and maintain. Although EC and scintillometers are less costly and relatively portable, EC has known energy balance closure discrepancies. Previous scintillometer studies used EC for ground-truthing, but no studies considered weighing lysimeters. In this study, a Surface Layer Scintillometer (SLS) was evaluated for accuracy in determining ET as well as sensible and latent heat fluxes, as compared to a large weighing lysimeter in Bushland, TX. The SLS was installed over irrigated grain sorghum ( Sorghum bicolor (L.) Moench) for the period 29 July-17 August 2015 and over grain corn ( Zea mays L.) for the period 23 June-2 October 2016. Results showed poor correlation for sensible heat flux, but much better correlation with ET, with r² values of 0.83 and 0.87 for hourly and daily ET, respectively. The accuracy of the SLS was comparable to other ET sensing instruments with an RMSE of 0.13 mm·h -1 (31%) for hourly ET; however, summing hourly values to a daily time step reduced the ET error to 14% (0.75 mm·d -1 ). This level of accuracy indicates that potential exists for the SLS to be used in some water management applications. As few studies have been conducted to evaluate the SLS for ET estimation, or in combination with lysimetric data, further evaluations would be beneficial to investigate the applicability of the SLS in water resources management.

Real-time weigh-in-motion measurement using fiber Bragg grating sensors

NASA Astrophysics Data System (ADS)

Huang, Ying; Palek, Leonard; Strommen, Robert; Worel, Ben; Chen, Genda

2014-03-01

Overloading truck loads have long been one of the key reasons for accelerating road damage, especially in rural regions where the design loads are expected to be small and in the cold regions where the wet-and-dry cycle places a significant role. To control the designed traffic loads and further guide the road design in future, periodical weight stations have been implemented for double check of the truck loads. The weight stations give chances for missing measurement of overloaded vehicles, slow down the traffic, and require additional labors. Infrastructure weight-in-motion sensors, on the other hand, keep consistent traffic flow and monitor all types of vehicles on roads. However, traditional electrical weight-in-motion sensors showed high electromagnetic interference (EMI), high dependence on environmental conditions such as moisture, and relatively short life cycle, which are unreliable for long-term weigh-inmotion measurements. Fiber Bragg grating (FBG) sensors, with unique advantages of compactness, immune to EMI and moisture, capability of quasi-distributed sensing, and long life cycle, will be a perfect candidate for long-term weigh-in-motion measurements. However, the FBG sensors also surfer from their frangible nature of glass materials for a good survive rate during sensor installation. In this study, the FBG based weight-in-motion sensors were packaged by fiber reinforced polymer (FRP) materials and further validated at MnROAD facility, Minnesota DOT (MnDOT). The design and layout of the FRP-FBG weight-in-motion sensors, their field test setup, data acquisition, and data analysis will be presented. Upon validation, the FRP-FBG sensors can be applied weigh-in-motion measurement to assistant road managements.

Factors associated with mortality of walleyes and saugers caught in live-release tournaments

USGS Publications Warehouse

Schramm, Harold; Vondracek, Bruce C.; French, William E.; Gerard, Patrick D.

2010-01-01

We measured the initial mortality (fish judged nonreleasable at weigh-in), prerelease mortality (fish judged nonreleasable 1–2 h after weigh-in [which includes initial mortality]), and postrelease mortality (fish that died during a 5-d retention in net-pens) in 14 live-release tournaments for walleye Sander vitreus conducted in April–October 2006 and April–July 2007 in lakes and rivers in Michigan, Minnesota, North Dakota, South Dakota, and Wisconsin. Among the 14 events, initial mortality was 0–28%, prerelease mortality was 3–54%, and postrelease mortality was 0–100%; the mortality of reference fish (walleyes ≥31 cm long that were captured by electrofishing and held in net-pens with tournament-caught walleyes to measure postrelease mortality) was 0–97%. Mortality was generally low in events conducted when water temperatures were below 14°C but substantially higher in events when water temperatures were above 18°C. The mortality of reference fish suggests that capture by electrofishing and minimal handling when the water temperature exceeds 19°C results in high mortality of walleyes that is largely the result of the thermal conditions immediately after capture. Mortality was not related to the size of the tournaments (number of boats), the total number or weight of walleyes weighed in, or the mean number or weight of walleyes weighed in per boat. Mortality was positively related to the depth at which walleyes were caught and the live-well temperature and negatively related to the live-well dissolved oxygen concentration. Surface water temperature was the best predictor of mortality, and models were developed to predict the probability of prerelease and postrelease mortality of 10, 20, and 30% or less of tournament-caught walleyes due to water temperature.

Factors associated with initial mortality of Walleye and Sauger caught in live-release tournaments

USGS Publications Warehouse

Schramm, Harold L.; Vondracek, Bruce C.; French, William E.; Gerard, Patrick D.

2010-01-01

We measured the initial mortality (fish judged nonreleasable at weigh-in), prerelease mortality (fish judged nonreleasable 1–2 h after weigh-in [which includes initial mortality]), and postrelease mortality (fish that died during a 5-d retention in net-pens) in 14 live-release tournaments for walleye Sander vitreus conducted in April–October 2006 and April–July 2007 in lakes and rivers in Michigan, Minnesota, North Dakota, South Dakota, and Wisconsin. Among the 14 events, initial mortality was 0–28%, prerelease mortality was 3–54%, and postrelease mortality was 0–100%; the mortality of reference fish (walleyes ≥31 cm long that were captured by electrofishing and held in net-pens with tournament-caught walleyes to measure postrelease mortality) was 0–97%. Mortality was generally low in events conducted when water temperatures were below 14°C but substantially higher in events when water temperatures were above 18°C. The mortality of reference fish suggests that capture by electrofishing and minimal handling when the water temperature exceeds 19°C results in high mortality of walleyes that is largely the result of the thermal conditions immediately after capture. Mortality was not related to the size of the tournaments (number of boats), the total number or weight of walleyes weighed in, or the mean number or weight of walleyes weighed in per boat. Mortality was positively related to the depth at which walleyes were caught and the live-well temperature and negatively related to the live-well dissolved oxygen concentration. Surface water temperature was the best predictor of mortality, and models were developed to predict the probability of prerelease and postrelease mortality of 10, 20, and 30% or less of tournament-caught walleyes due to water temperature.

Transabdominal recordings of fetal heart rate in extremely small fetuses.

PubMed

Odendaal, Hein; Groenewald, Coen; Hankins, Gary D V; du Plessis, Carlie; Myers, Michael M; Fifer, William P

2017-11-12

As part of the fetal assessment for the Safe Passage Study, we recorded raw data of the fetal ECG via five maternal abdominal wall electrodes from 20 weeks to 23 weeks 6 days' gestation. For this study were extracted and analyzed the FHR patterns from the stored raw data in 16 stillbirths where the fetus weighed less than 1000 g and where autopsy was performed. Birth weights ranged from 190 to 970 g. The proportion FHR signal loss ranged from 0.3% to 21.1%. In the smallest fetus the heart weighed 1.3 g, yet the FHR signal loss was only 0.9%.

METHOD OF TESTING HERMETIC CONTAINERS

DOEpatents

Borst, L.B.

1959-02-17

A method is presented for testing hermetic containers enclosing a material capable of chemically combining with a fluid at elevated temperatures. In accordance with the invention, the container to be tested is weighed together with the material therein. The container and its contents are then immersed in the fluid and heated to a temperature sufficiently high to cause a reaction to take place between the contents and the fluid and maintained under such conditions for a definite period of time. The container and its contents are then cooled and re-weighed. The rate of change in weight is determined and utilized as an index to determine the possibility of container failure.

Biomonitoring of Environmental Status and Trends (BEST) Program: Environmental contaminants and their effects on fish in the Columbia River Basin

USGS Publications Warehouse

Hinck, Jo Ellen; Schmitt, Christopher J.; Bartish, Timothy M.; Denslow, Nancy D.; Blazer, Vicki; Anderson, Patrick J.; Coyle, James J.; Dethloff, Gail M.; Tillitt, Donald E.

2004-01-01

Common carp (Cyprinus carpio), black basses (Micropterus sp.), and largescale sucker (Catostomus macrocheilus) together accounted for 80% of the fish sampled during the study. Fish were weighed and measured then field-examined for external and internal lesions, and liver, spleen, and gonads were weighed to compute somatic indices. Selected tissues and fluids were obtained and preserved for analysis of fish health and reproductive biomarkers. Composite samples of whole fish from each station were grouped by species and gender and analyzed for persistent organic and inorganic contaminants and for dioxin-like activity using H4IIE rat hepatoma cell bioassay.

KSC-97PC1108

NASA Image and Video Library

1997-07-22

Flight mechanics from NASA’s Jet Propulsion Laboratory (JPL) in Pasadena, Calif., work on the lifting fixture that picks up the Cassini spacecraft in KSC’s Payload Hazardous Servicing Facility. The orbiter alone weighs about 4,750 pounds (2,150 kilograms). At launch, the combined orbiter, Huygens probe, launch vehicle adapter, and propellants will weigh about 12,346 pounds (5,600 kilograms). Scheduled for launch in October, the Cassini mission, a joint US-European four-year orbital surveillance of Saturn's atmosphere and magnetosphere, its rings, and its moons, seeks insight into the origins and evolution of the early solar system. JPL is managing the Cassini project for NASA

Modernization of dump truck onboard system

NASA Astrophysics Data System (ADS)

Semenov, M. A.; Bolshunova, O. M.; Korzhev, A. A.; Kamyshyan, A. M.

2017-10-01

The review of the only automated dispatch system for the career dump trucks, which is presented in the domestic market, was made. A method for upgrading the loading control system and technological weighing process of the career dump was proposed. The cargo weight during loading is determined by the gas pressure in the suspension cylinders at the time of the oscillation ending and at the start of the vibration smoothing process; the smoothing speed correction is performed. The error of the cargo weighting is 2.5-3%, and of the technological weighing process during driving - 1%, which corresponds to the error level of the steady-state weighting means.

Mass measurement of 1 kg silicon spheres to establish a density standard

NASA Astrophysics Data System (ADS)

Mizushima, S.; Ueki, M.; Fujii, K.

2004-04-01

Air buoyancy causes a significant systematic effect in precision mass determination of 1 kg silicon spheres. In order to correct this effect accurately, mass measurement of the silicon sphere was conducted using buoyancy artefacts; additionally, in order to stabilize atmospheric conditions, we used a vacuum chamber in which a mass comparator had been installed. The silicon sphere was also weighed in vacuum to verify the air buoyancy correction. Mass differences measured in air and in vacuum showed good agreement with each other in spite of the desorption effect from weight surfaces. Furthermore, the result of weighing under vacuum conditions demonstrated better repeatability than that obtained in air.

The use of religion in death penalty sentencing trials.

PubMed

Miller, Monica K; Bornstein, Brian H

2006-12-01

Both prosecutors and defense attorneys have presented religious appeals and testimony about a defendant's religious activities in order to influence capital jurors' sentencing. Courts that have objected to this use of religion fear that religion will improperly influence jurors' decisions and interfere with their ability to weigh aggravators and mitigators. This study investigated the effects of both prosecution and defense appeals. Prosecution appeals did not affect verdict decisions; however, use of religion by the defense affected both verdicts and the weighing of aggravators and mitigators. These results could be due to differences in perceived sincerity and remorse that are conveyed in the various appeals.

Patau syndrome with a long survival. A case report.

PubMed

Duarte, A C; Menezes, A I C; Devens, E S; Roth, J M; Garcias, G L; Martino-Roth, M G

2004-06-30

Trisomy 13 is a clinically severe entity; 85% of the patients do not survive beyond one year, and most children die before completing six months of age. We report a female child, 28 months old, white, the fourth child of a non-consanguineous couple, who presented trisomy 13. The child was born at term, from a vaginal delivery, weighing 2600 g. At birth, she was cyanotic, icteric, spastic, and cried weakly. The initial clinical examination detected polydactyly in the left hand, congenital clubfoot and convex soles, ocular hypertelorism, a low nasal bridge, numerous hemangiomas distributed throughout the body, cardiomegaly, and perimembranous inter-ventricular communication. There was no cleft lip or palate. On physical examination at 18 months old, the child weighed 6,900 g, had a cephalic perimeter of 41 cm, a thoracic perimeter of 43 cm and was 76 cm tall. At 28 months, she weighed 10,760 g and was 88.5 cm tall. Neuropsychomotor development retardation was evident from birth and, according to the psychologist and the social assistant of APAE (Handicapped Parents and Friends Association) in Canguçu, Rio Grande do Sul, there was a noticeable improvement after physiotherapy and recreational sessions.

SiC lightweight telescopes for advanced space applications. I - Mirror technology

NASA Technical Reports Server (NTRS)

Anapol, Michael I.; Hadfield, Peter

1992-01-01

A SiC based telescope is an extremely attractive emerging technology which offers the lightweight and stiffness features of beryllium, the optical performance of glass to diffraction limited visible resolution, superior optical/thermal stability to cryogenic temperatures, and the cost advantages of an aluminum telescope. SSG has developed various SiC mirrors with and without a silicon coating and tested these mirrors over temperature ranges from +50 C to -250 C. Our test results show less than 0.2 waves P-V in visible wavefront change and no hysteresis over this wide temperature range. Several SSG mirrors are representative of very lightweight SiC/Si mirrors including (1) a 9 cm diameter, high aspect ratio mirror weighing less than 30 grams and (2) a 23 cm diameter eggcrated mirror weighing less than 400 grams. SSG has also designed and analyzed a 0.6 meter SiC based, on axis, three mirror reimaging telescope in which the primary mirror weighs less than 6 kg and a 0.5 meter GOES-like scan mirror. SSG has also diamond turned several general aspheric SiC/Si mirrors with excellent cryo optical performance.

Analysis of sitting forces on stationary chairs for daily activities.

PubMed

Hu, Lingling; Tackett, Bob; Tor, Onder; Zhang, Jilei

2016-04-01

No literature related to the study of sitting forces on chairs sat on by people who weighed over 136 kg was found. The Business Institutional Furniture Manufactures Association needs force data for development of performance test standards to test chairs for users who weigh up to 181 kg. 20 participants who weighed from 136 to 186 kg completed 6 tasks on an instrumented chair in the sequence of sitting down, remaining seated and rising. Effects of sitting motion, armrest use and seat cushion thickness on vertical sitting forces and centre-of-force were investigated. Results indicated hard sitting down yielded the highest sitting force of 213% in terms of participants' body weights. Armrest use affected sitting forces of normal sitting down, but not of rising and hard sitting down. Cushion thickness affected sitting forces of normal and hard sitting down and shifting, but not of rising, static seating or stretching backward situations. Practitioner Summary: Results of the sitting force and centre-of-force data obtained for this research can help furniture manufacturers develop new product performance test standards for creating reliable engineering design and manufacturing quality and durable products to meet a niche market need.

The validity of ultrasound estimation of muscle volumes.

PubMed

Infantolino, Benjamin W; Gales, Daniel J; Winter, Samantha L; Challis, John H

2007-08-01

The purpose of this study was to validate ultrasound muscle volume estimation in vivo. To examine validity, vastus lateralis ultrasound images were collected from cadavers before muscle dissection; after dissection, the volumes were determined by hydrostatic weighing. Seven thighs from cadaver specimens were scanned using a 7.5-MHz ultrasound probe (SSD-1000, Aloka, Japan). The perimeter of the vastus lateralis was identified in the ultrasound images and manually digitized. Volumes were then estimated using the Cavalieri principle, by measuring the image areas of sets of parallel two-dimensional slices through the muscles. The muscles were then dissected from the cadavers, and muscle volume was determined via hydrostatic weighing. There was no statistically significant difference between the ultrasound estimation of muscle volume and that estimated using hydrostatic weighing (p > 0.05). The mean percentage error between the two volume estimates was 0.4% +/- 6.9. Three operators all performed four digitizations of all images from one randomly selected muscle; there was no statistical difference between operators or trials and the intraclass correlation was high (>0.8). The results of this study indicate that ultrasound is an accurate method for estimating muscle volumes in vivo.

Nutritional composition of the commonly consumed composite dishes for the Barbados National Cancer Study.

PubMed

Sharma, Sangita; Harris, Rachel; Cao, Xia; Hennis, Anselm J M; Leske, M Cristina; Wu, Suh-Yuh

2007-09-01

To provide, for the first time, the calculated nutritional composition of 32 composite dishes commonly consumed in Barbados to enable dietary intake to be calculated from a Quantitative Food Frequency Questionnaire developed specifically for this population to determine associations between diet and risk of prostate and breast cancer. Weighed recipes were collected in up to six different households for each of the 32 composite dishes. The average nutritional composition for these composite dishes was calculated using the US Department of Agriculture National Nutrient Database. One hundred and fifty-two weighed recipes were collected for 32 composite dishes: five were fish based, two were ground beef dishes, two were chicken based, two were offal based, two were lamb dishes, one was pork based, three were rice based, three were commonly consumed home-made drinks, and the remaining were miscellaneous items. A total of 152 weighed recipes were collected and we provide, for the first time, nutritional composition data for 32 commonly consumed food and drink items in Barbados. Such data are essential for assessing nutrient intake and determining associations between diet and prostate and breast cancer in the Barbados National Cancer Study.

The total thermal insulation of the new-born baby

PubMed Central

Hey, E. N.; Katz, G.; O'Connell, Bridget

1970-01-01

1. One hundred and seventeen healthy new-born babies weighing between 0·9 and 4·8 kg at delivery have been studied during the first ten days of life, and sixteen of these babies have been studied serially for 6 weeks after birth. The babies lay supine in a draught-free environment (air speed 4-5 cm/sec) of moderate humidity. The operative temperature was between 26 and 38° C for the babies who were studied naked. 2. Total non-evaporative heat loss was calculated from simultaneous measurements of oxygen consumption, evaporative water loss and the concomitant change in mean body temperature. 3. Approximately 10% of the total body surface area was in contact with the mattress or floor. Conductive heat loss accounted for only about 5% of all non-evaporative heat loss when the naked baby was lying on a thick foam mattress, but for as much as 25% when the baby was lying in a water-jacketed chamber with a floor of clear plastic ∼ 5 mm thick. 4. Insulation to heat loss by convection and radiation varied with environmental temperature. Total specific insulation was low in a warm environment when the naked baby vasodilated, and rose by between 16 and 25% to a maximum in an environment of 31° C. It decreased significantly when the baby became physically active in environments with a temperature less than this. 5. Total specific insulation in an environment of 31° C varied with body size: it averaged 0·156° C.m2.hr/kcal in seven naked babies weighing 0·9-1·2 kg, rose to 0·190° C.m2.hr/kcal in twelve babies weighing 1·8-2·2 kg, and averaged 0·201° C.m2.hr/kcal in the thirty-four babies who weighed over 3 kg. Tissue insulation accounted for 23% of this total specific insulation in the smaller babies, and about 28% of the total in babies weighing over 3 kg. 6. Clothing ten babies in a vest, napkin and long cotton nightdress increased the total specific insulation by an average of 0·23° C.m2.hr/kcal. PMID:5503276

Validation of triple pass 24-hour dietary recall in Ugandan children by simultaneous weighed food assessment.

PubMed

Nightingale, Helen; Walsh, Kevin J; Olupot-Olupot, Peter; Engoru, Charles; Ssenyondo, Tonny; Nteziyaremye, Julius; Amorut, Denis; Nakuya, Margaret; Arimi, Margaret; Frost, Gary; Maitland, Kathryn

2016-08-24

Undernutrition remains highly prevalent in African children, highlighting the need for accurately assessing dietary intake. In order to do so, the assessment method must be validated in the target population. A triple pass 24 hour dietary recall with volumetric portion size estimation has been described but not previously validated in African children. This study aimed to establish the relative validity of 24-hour dietary recalls of daily food consumption in healthy African children living in Mbale and Soroti, eastern Uganda compared to simultaneous weighed food records. Quantitative assessment of daily food consumption by weighed food records followed by two independent assessments using triple pass 24-hour dietary recall on the following day. In conjunction with household measures and standard food sizes, volumes of liquid, dry rice, or play dough were used to aid portion size estimation. Inter-assessor agreement, and agreement with weighed food records was conducted primarily by Bland-Altman analysis and secondly by intraclass correlation coefficients and quartile cross-classification. 19 healthy children aged 6 months to 12 years were included in the study. Bland-Altman analysis showed 24-hour recall only marginally under-estimated energy (mean difference of 149kJ or 2.8%; limits of agreement -1618 to 1321kJ), protein (2.9g or 9.4%; -12.6 to 6.7g), and iron (0.43mg or 8.3%; -3.1 to 2.3mg). Quartile cross-classification was correct in 79% of cases for energy intake, and 89% for both protein and iron. The intraclass correlation coefficient between the separate dietary recalls for energy was 0.801 (95% CI, 0.429-0.933), indicating acceptable inter-observer agreement. Dietary assessment using 24-hour dietary recall with volumetric portion size estimation resulted in similar and acceptable estimates of dietary intake compared with weighed food records and thus is considered a valid method for daily dietary intake assessment of children in communities with similar diets. The method will be utilised in a sub-study of a large randomised controlled trial addressing treatment in severe childhood anaemia. This study was approved by the Mbale Research Ethics committee (Reference: 2013-050). Transfusion and Treatment of severe Anaemia in African Children: a randomized controlled Trial (TRACT) registration: ISRCTN84086586.

Cesarean Section Rate in Singleton Primiparae and Related Factors in Beijing, China.

PubMed

Song, Geng; Wei, Yu-Mei; Zhu, Wei-Wei; Yang, Hui-Xia

2017-10-20

The cesarean section rate (CSR) has been a main concern worldwide. The present study aimed to investigate the CSR in Beijing, China, and to analyze the related factors of CS delivery. An observational study was conducted in 15 medical centers in Beijing using a systemic cluster sampling method. In total, 15,194 pregnancies were enrolled in the study between June 20, 2013 and November 30, 2013. Independent t-tests and Pearson's Chi-square test were used to examine differences between two groups, and related factors of the CSR were examined by multivariable logistic regression. The CSR was 41.9% (4471/10,671) in singleton primiparae. Women who were more than 35 years old had a 7.4-fold increased risk of CS delivery compared with women <25 years old (odd ratio [OR] = 7.388, 95% confidence interval [CI] = 5.561-9.816, P < 0.001). Prepregnancy obese women had a 2-fold increased risk of CS delivery compared with prepregnancy normal weight women (OR = 2.058, 95% CI = 1.640-2.584, P < 0.001). The excessive weight gain group had a 1.4-fold increased risk of CS delivery compared with the adequate weight gain group (OR = 1.422, 95% CI = 1.289-1.568, P < 0.001). Gestational diabetes mellitus (GDM) women and DM women had an increased risk of CS delivery (1.2- and 1.7-fold, respectively) compared with normal blood glucose women. Women who were born in rural areas had a lower risk of CS delivery than did those who were born in urban areas (OR = 0.696, 95% CI = 0.625-0.775, P < 0.001). The risk of CS delivery gradually increased with a decreasing education level. Neonates weighing 3000-3499 g had the lowest CSR (36.2%). Neonates weighing <2500 g had a 2-fold increased risk of CS delivery compared with neonates weighing 3000-3499 g (OR = 2.020, 95% CI = 1.537-2.656, P < 0.001). Neonates weighing ≥4500 g had an 8.3-fold increased risk of CS delivery compared with neonates weighing 3000-3499 g (OR = 8.313, 95% CI = 4.436-15.579, P < 0.001). Maternal age, prepregnancy body mass index, gestational weight gain, blood glucose levels, residence, education level, and singleton fetal birth weight are all factors that might significantly affect the CSR.

Validity of self-reported lunch recalls in Swedish school children aged 6–8 years

PubMed Central

2013-01-01

Background Previous studies have suggested that young children are inaccurate reporters of dietary intake. The purpose of this study was to validate a single recall of the previous day’s school lunch reported by 6–8 year old Swedish children and to assess teacher-recorded intake of the same meal in a standardized food journal. An additional research question was whether parents could report their child’s intake of the previous day’s lunch. Subjects constituted a convenience sample from the large, multi-country study Identification and prevention of Dietary- and lifestyle-induced health EFfects In Children and infantS (IDEFICS). Validations of both children’s recalls and teachers’ records were made by comparing results with the duplicate plate reference method. Findings Twenty-five children (12 boys/13 girls) aged 6–8 years participated in the validation study at one school in western Sweden. Children were accurate self-reporters of their dietary intake at lunch, with no significant difference between reported and weighed intake (Mean difference (SD): 7(50) kcals, p=0.49). Teachers significantly over-reported intake (Mean difference (SD): 65(79) kcals, p=0.01). For both methods, child-reported and teacher-recorded, correlations with weighed intake were strong (Pearson’s correlations r=0.92, p<0.001 and r=0.83, p<0.001 respectively). Bland-Altman plots showed strong agreement between child-reported and weighed intakes but confirmed systematic differences between teacher-records and weighed intakes. Foods were recalled by children with a food-match rate of 90%. In all cases parents themselves were unable to report on quantities consumed and only four of 25 children had parents with knowledge regarding food items consumed. Conclusions Children 6–8 years of age accurately recalled their school lunch intake for one occasion while teachers recorded with less accuracy. Our findings suggest that children as young as six years of age may be better able to report on their dietary intake than previously suggested, at least for one main meal at school. Teacher-recorded intake provides a satisfactory estimate but with greater systematic deviation from the weighed intake. Parents were not able to report on their children’s school lunches consumed on the previous day. PMID:24047239

Alcohol and drug abusers' reasons for seeking treatment.

PubMed

Cunningham, J A; Sobell, L C; Sobell, M B; Gaskin, J

1994-01-01

Clients at two different treatment facilities were asked at assessment how influential each of 10 possible reasons were in their decision to change their alcohol or drug use. Clients at both facilities most often endorsed "weighing the pros and cons of drinking or drug use" and a "warning from spouse." Client's reasons for seeking treatment were also examined in relation to treatment compliance. Three reasons--"weighing the pros and cons," "hitting rock bottom," and experiencing a "major lifestyle change"--were predictive of treatment compliance. Clients who rated any of these reasons as influential were more likely to enter and complete treatment. Although more research is needed, knowledge of clients' reasons for seeking treatment might be useful in treatment matching.

KSC-99pp1220

NASA Image and Video Library

1999-10-14

KENNEDY SPACE CENTER, FLA. -- Live TV trucks (far right) from local channels merge at the site of the fallen Mobile Service Tower (MST) and umbilical tower nearby after their demolition. The towers were demolished to make room for Lockheed Martin's 14-acre Vehicle Integration Facility (VIF), under construction. Weighing two million pounds, the umbilical tower was approximately 200 feet high. The taller 300-foot MST weighed five million pounds. About 200 pounds of linear-shaped charges were used to bring down the towers so that the materials can be recycled. The implosion and removal of the tower debris is expected to be completed in two months. The VIF will be used for Lockheed Martin's Atlas V Launch System.

KSC-99pp1219

NASA Image and Video Library

1999-10-14

KENNEDY SPACE CENTER, FLA. -- Live TV trucks from local channels merge at the site of the fallen Mobile Service Tower (MST) and umbilical tower nearby after their demolition. The towers were demolished to make room for Lockheed Martin's 14-acre Vehicle Integration Facility (VIF), under construction. Weighing two million pounds, the umbilical tower was approximately 200 feet high. The taller 300-foot MST weighed five million pounds. About 200 pounds of linear-shaped charges were used to bring down the towers so that the materials can be recycled. The implosion and removal of the tower debris is expected to be completed in two months. The VIF will be used for Lockheed Martin's Atlas V Launch System.

Validation of a questionnaire method for estimating extent of menstrual blood loss in young adult women.

PubMed

Heath, A L; Skeaff, C M; Gibson, R S

1999-04-01

The objective of this study was to validate two indirect methods for estimating the extent of menstrual blood loss against a reference method to determine which method would be most appropriate for use in a population of young adult women. Thirty-two women aged 18 to 29 years (mean +/- SD; 22.4 +/- 2.8) were recruited by poster in Dunedin (New Zealand). Data are presented for 29 women. A recall method and a record method for estimating extent of menstrual loss were validated against a weighed reference method. Spearman rank correlation coefficients between blood loss assessed by Weighed Menstrual Loss and Menstrual Record was rs = 0.47 (p = 0.012), and between Weighed Menstrual Loss and Menstrual Recall, was rs = 0.61 (p = 0.001). The Record method correctly classified 66% of participants into the same tertile, grossly misclassifying 14%. The Recall method correctly classified 59% of participants, grossly misclassifying 7%. Reference method menstrual loss calculated for surrogate categories demonstrated a significant difference between the second and third tertiles for the Record method, and between the first and third tertiles for the Recall method. The Menstrual Recall method can differentiate between low and high levels of menstrual blood loss in young adult women, is quick to complete and analyse, and has a low participant burden.

Fine PM measurements: personal and indoor air monitoring.

PubMed

Jantunen, M; Hänninen, O; Koistinen, K; Hashim, J H

2002-12-01

This review compiles personal and indoor microenvironment particulate matter (PM) monitoring needs from recently set research objectives, most importantly the NRC published "Research Priorities for Airborne Particulate Matter (1998)". Techniques and equipment used to monitor PM personal exposures and microenvironment concentrations and the constituents of the sampled PM during the last 20 years are then reviewed. Development objectives are set and discussed for personal and microenvironment PM samplers and monitors, for filter materials, and analytical laboratory techniques for equipment calibration, filter weighing and laboratory climate control. The progress is leading towards smaller sample flows, lighter, silent, independent (battery powered) monitors with data logging capacity to store microenvironment or activity relevant sensor data, advanced flow controls and continuous recording of the concentration. The best filters are non-hygroscopic, chemically pure and inert, and physically robust against mechanical wear. Semiautomatic and primary standard equivalent positive displacement flow meters are replacing the less accurate methods in flow calibration, and also personal sampling flow rates should become mass flow controlled (with or without volumetric compensation for pressure and temperature changes). In the weighing laboratory the alternatives are climatic control (set temperature and relative humidity), and mechanically simpler thermostatic heating, air conditioning and dehumidification systems combined with numerical control of temperature, humidity and pressure effects on flow calibration and filter weighing.

Heart rate detection from an electronic weighing scale.

PubMed

González-Landaeta, R; Casas, O; Pallàs-Areny, R

2007-01-01

We propose a novel technique for heart rate detection on a subject that stands on a common electronic weighing scale. The detection relies on sensing force variations related to the blood acceleration in the aorta, works even if wearing footwear, and does not require any sensors attached to the body. We have applied our method to three different weighing scales, and estimated whether their sensitivity and frequency response suited heart rate detection. Scale sensitivities were from 490 nV/V/N to 1670 nV/V/N, all had an underdamped transient response and their dynamic gain error was below 19% at 10 Hz, which are acceptable values for heart rate estimation. We also designed a pulse detection system based on off-the-shelf integrated circuits, whose gain was about 70x10(3) and able to sense force variations about 240 mN. The signal-to-noise ratio (SNR) of the main peaks of the pulse signal detected was higher than 48 dB, which is large enough to estimate the heart rate by simple signal processing methods. To validate the method, the ECG and the force signal were simultaneously recorded on 12 volunteers. The maximal error obtained from heart rates determined from these two signals was +/-0.6 beats/minute.

Adapted Finnegan scoring list for observation of anti-depressant exposed infants.

PubMed

Kieviet, Noera; van Ravenhorst, Mariëtte; Dolman, Koert M; van de Ven, Peter M; Heres, Marion; Wennink, Hanneke; Honig, Adriaan

2015-01-01

The Finnegan scoring list (FSL) is widely used to screen for poor neonatal adaptation in infants exposed to anti-depressants in utero. However, the large number of FSL-items and differential weighing of each item is time consuming. The aim of this study was to shorten and simplify the FSL yet preserving its clinimetric properties. This observational study examined infants exposed to an anti-depressant during pregnancy admitted for at least 72 h on a maternity ward. Trained nurses completed the FSL three times daily. Items for the adapted FSL were selected through forward analysis whereby the number of selected items was based on the area under the curve (AUC). Internal validity was assessed by cross-validation. 183 infants met the inclusion criteria. By forward analysis eight equally-weighed items resulted in an AUC of 0.91. In cross-validation, the mean AUC was 0.89 for 8 items. This adapted FSL had a sensitivity of 97.7% and specificity of 37.0% and a sensitivity of 41.9% and specificity of 86.2% regarding a cut-off of, respectively, 1 and 2. An adapted FSL with eight equally-weighed items has acceptable clinimetric properties and can serve as an easy to apply screening tool in infants exposed to anti-depressants during pregnancy.

Heart rate detection from an electronic weighing scale.

PubMed

González-Landaeta, R; Casas, O; Pallàs-Areny, R

2008-08-01

We propose a novel technique for beat-to-beat heart rate detection based on the ballistocardiographic (BCG) force signal from a subject standing on a common electronic weighing scale. The detection relies on sensing force variations related to the blood acceleration in the aorta, works even if wearing footwear and does not require any sensors attached to the body because it uses the load cells in the scale. We have devised an approach to estimate the sensitivity and frequency response of three commercial weighing scales to assess their capability to detect the BCG force signal. Static sensitivities ranged from 490 nV V(-1) N(-1) to 1670 nV V(-1) N(-1). The frequency response depended on the subject's mass but it was broad enough for heart rate estimation. We have designed an electronic pulse detection system based on off-the-shelf integrated circuits to sense heart-beat-related force variations of about 0.24 N. The signal-to-noise ratio of the main peaks of the force signal detected was higher than 30 dB. A Bland-Altman plot was used to compare the RR time intervals estimated from the ECG and BCG force signals for 17 volunteers. The error was +/-21 ms, which makes the proposed technique suitable for short-term monitoring of the heart rate.

Positive weighing of the other's collective narrative among Jewish and Bedouin-Palestinian teachers in Israel and its correlates.

PubMed

Lazar, Alon; Braun-Lewensohn, Orna; Litvak Hirsch, Tal

2016-06-01

Teachers play a pivotal role in the educational discourse around collective narratives, and especially the other's narrative. The study assumed that members of groups entangled in a conflict approach the different modules of the other's narrative distinctively. Jewish and Palestinian teachers, Israeli citizens, answered questionnaires dealing with the narrative of the other, readiness for interethnic contact, negative between-group emotions and preferences for resolutions of the Israeli-Palestinian (I-P) conflict. Positive weighing of the other's narrative among Jewish teachers correlated with high levels of readiness for interethnic contact and low levels of negative between-group emotions, across the various modules of the Palestinian narrative. Preferences for a peaceful resolution of the I-P conflict and rejection of a violent one were noted in two of the modules. Among Palestinian teachers, positive weighing of the other's collective narrative was exclusively noted for the Israeli narrative of the Holocaust, and this stance negatively related to negative between-group emotions and preference for a violent solution of the I-P conflict, and positively related to readiness for interethnic contact and preference of a peaceful resolution of the conflict. Practical implications of these findings for peace education are discussed. © 2015 International Union of Psychological Science.

A ten-year study of measles admissions in a Nigerian teaching hospital.

PubMed

Fetuga, M B; Jokanma, O F N; Ogunfowora, O B; Abiodun, Runsewe

2007-03-01

Measles remains a major cause of childhood morbidity and mortality in Nigeria despite the availability of safe and effective vaccines. The last report on measles from our center was about 15 years ago. A review of the current status is necessary in order to strengthen interventional strategies. To study the burden and epidemiological correlates of measles admissions in a Nigerian teaching hospital. Retrospective. Children admitted with measles infection and/or complications. A review of medical records of measles admissions over the 10-year period, May 1994 and April 2004. One hundred and sixty four children (6.1% of paediatric admissions) aged 4 months to 12 years (28.4 + 28.82 months) were admitted with measles. Sixty-three infants (< or = 12 months old) accounted for 39.4% of patients with about half of them younger than nine months. History of vaccination against measles was obtained in 43 (29.5%) subjects. Forty- eight (32.9%) children were underweight weighing between 60-80% of the expected weight for age and six (4.1%) of them were marasmic weighing below 60% of expected weight for age. None of the patients had oedema. The commonest complication was bronchopneumonia (55.5%). Major complications were less commonly associated with children who weighed more than 80% of expected weight (p = 0.011). The case fatality rate was 7.5 % accounting for 0.4% of childhood mortality. Children without prior measles vaccination, those of low socio-economic status and those weighing less than 80% of expected for age all had significantly higher mortality rates. (p< 0.05 in each case). Measles incidence has risen in the last ten years in Sagamu and its environs but it is still largely a disease of young children. Therefore routine immunization and disease surveillance should be strengthened. Supplemental immunization activities should also be considered.

Reliability and Validity of Digital Imagery Methodology for Measuring Starting Portions and Plate Waste from School Salad Bars.

PubMed

Bean, Melanie K; Raynor, Hollie A; Thornton, Laura M; Sova, Alexandra; Dunne Stewart, Mary; Mazzeo, Suzanne E

2018-04-12

Scientifically sound methods for investigating dietary consumption patterns from self-serve salad bars are needed to inform school policies and programs. To examine the reliability and validity of digital imagery for determining starting portions and plate waste of self-serve salad bar vegetables (which have variable starting portions) compared with manual weights. In a laboratory setting, 30 mock salads with 73 vegetables were made, and consumption was simulated. Each component (initial and removed portion) was weighed; photographs of weighed reference portions and pre- and post-consumption mock salads were taken. Seven trained independent raters visually assessed images to estimate starting portions to the nearest ¼ cup and percentage consumed in 20% increments. These values were converted to grams for comparison with weighed values. Intraclass correlations between weighed and digital imagery-assessed portions and plate waste were used to assess interrater reliability and validity. Pearson's correlations between weights and digital imagery assessments were also examined. Paired samples t tests were used to evaluate mean differences (in grams) between digital imagery-assessed portions and measured weights. Interrater reliabilities were excellent for starting portions and plate waste with digital imagery. For accuracy, intraclass correlations were moderate, with lower accuracy for determining starting portions of leafy greens compared with other vegetables. However, accuracy of digital imagery-assessed plate waste was excellent. Digital imagery assessments were not significantly different from measured weights for estimating overall vegetable starting portions or waste; however, digital imagery assessments slightly underestimated starting portions (by 3.5 g) and waste (by 2.1 g) of leafy greens. This investigation provides preliminary support for use of digital imagery in estimating starting portions and plate waste from school salad bars. Results might inform methods used in empirical investigations of dietary intake in schools with self-serve salad bars. Copyright © 2018 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Recent improvements of the French liquid micro-flow reference facility

NASA Astrophysics Data System (ADS)

Florestan, Ogheard; Sandy, Margot; Julien, Savary

2018-02-01

According to the mission of the national reference laboratory, LNE-CETIAT achieved in 2012 the construction and accreditation of a modern and innovative calibration laboratory based on the gravimetric method. The measurement capabilities cover a flow rate range for liquid from 10 kg · h-1 down to 1 g · h-1 with expanded relative uncertainties from 0.1% to 0.6% (k  =  2). Since 2012, several theoretical and experimental studies have allowed a better knowledge and control over uncertainty sources and have decreased calibration time. When dealing with liquid micro-flow using a reference method such as the gravimetric method, several difficulties have to be overcome. The main improvements described in this paper relate to the enhancement of the evaporation trap system, the merging of the four dedicated measurement lines into one, and the implementation of a gravimetric dynamic ‘flying’ method for the calculation of the reference flow rate. The evaporation-avoiding system has been replaced by an oil layer in order to remove the possibility of condensation of water on both the weighed vessel and the immersed capillary. The article describes the experimental method used to quantify the effect of surface tension of water/oil/air interfaces on the weighed mass. The traditional static gravimetric method has been upgraded by a dynamic ‘flying’ gravimetric method. The article presents the newly implemented method, its validation and its advantages compared to the static method. The four dedicated weighing devices, dispatched over four sub-ranges of flow rate, have been merged leading to the use of only one weighing scale with the same uncertainties on the reference flow rate. The article discusses the new uncertainty budget over the full flow rate range capability. Finally, the article discusses the improvements still under development and the general prospects of liquid micro-flow metrology.

Effect of investigator disturbance in experimental forensic entomology: carcass biomass loss and temperature.

PubMed

De Jong, Grant D; Hoback, W Wyatt; Higley, Leon G

2011-01-01

Often carrion decomposition studies are conducted using a single carcass or a few carcasses sampled repeatedly through time to reveal trends in succession community composition. Measurements of biomass and other abiotic parameters (e.g., temperature) are often collected on the same carcasses but are rarely a focal point of the studies. This study investigated the effects that repeated sampling during experiments have on the decomposition of carrion, measured as both gross biomass (carcass plus fauna) and net biomass (carcass only), on carcasses disturbed on every visit (with weighing only or also with the collection of fauna) and on carcasses disturbed only once. Each trial lasted at least 21 days, with samples taken in triplicate. Rat carcasses used in this study were placed in the field on the same day and either weighed on every visit or ignored until a given day. Internal and ambient air temperatures were recorded on each carcass at the time of sampling and on undisturbed carcasses using temperature loggers. The presence of succession fauna did not result in significant biomass loss on most days; however, there were individual days early in decomposition (days 3 through 6) when the succession fauna comprised a large portion of the gross biomass. With the exception of biomass loss by the emigration of maggots on days 4 and 5, neither repeated weighing of the carcasses nor repeated weighing and faunal sampling of the carcasses statistically affected the rate of biomass loss. Internal temperatures of carcasses sampled repeatedly were frequently 2-5°C lower than those that had not been disturbed, and ambient temperatures differed significantly depending on the location of measurement device. Results indicate that methods used historically for biomass loss determination in experimental forensic entomology studies are adequate, but further refinements to experimental methodology are desirable. © 2010 American Academy of Forensic Sciences.

Weight change among people randomized to minimal intervention control groups in weight loss trials.

PubMed

Johns, David J; Hartmann-Boyce, Jamie; Jebb, Susan A; Aveyard, Paul

2016-04-01

Evidence on the effectiveness of behavioral weight management programs often comes from uncontrolled program evaluations. These frequently make the assumption that, without intervention, people will gain weight. The aim of this study was to use data from minimal intervention control groups in randomized controlled trials to examine the evidence for this assumption and the effect of frequency of weighing on weight change. Data were extracted from minimal intervention control arms in a systematic review of multicomponent behavioral weight management programs. Two reviewers classified control arms into three categories based on intensity of minimal intervention and calculated 12-month mean weight change using baseline observation carried forward. Meta-regression was conducted in STATA v12. Thirty studies met the inclusion criteria, twenty-nine of which had usable data, representing 5,963 participants allocated to control arms. Control arms were categorized according to intensity, as offering leaflets only, a single session of advice, or more than one session of advice from someone without specialist skills in supporting weight loss. Mean weight change at 12 months across all categories was -0.8 kg (95% CI -1.1 to -0.4). In an unadjusted model, increasing intensity by moving up a category was associated with an additional weight loss of -0.53 kg (95% CI -0.96 to -0.09). Also in an unadjusted model, each additional weigh-in was associated with a weight change of -0.42 kg (95% CI -0.81 to -0.03). However, when both variables were placed in the same model, neither intervention category nor number of weigh-ins was associated with weight change. Uncontrolled evaluations of weight loss programs should assume that, in the absence of intervention, their population would weigh up to a kilogram on average less than baseline at the end of the first year of follow-up. © 2016 The Authors Obesity published by Wiley Periodicals, Inc. on behalf of The Obesity Society (TOS).

Cesarean Section Rate in Singleton Primiparae and Related Factors in Beijing, China

PubMed Central

Song, Geng; Wei, Yu-Mei; Zhu, Wei-Wei; Yang, Hui-Xia

2017-01-01

Background: The cesarean section rate (CSR) has been a main concern worldwide. The present study aimed to investigate the CSR in Beijing, China, and to analyze the related factors of CS delivery. Methods: An observational study was conducted in 15 medical centers in Beijing using a systemic cluster sampling method. In total, 15,194 pregnancies were enrolled in the study between June 20, 2013 and November 30, 2013. Independent t-tests and Pearson's Chi-square test were used to examine differences between two groups, and related factors of the CSR were examined by multivariable logistic regression. Results: The CSR was 41.9% (4471/10,671) in singleton primiparae. Women who were more than 35 years old had a 7.4-fold increased risk of CS delivery compared with women <25 years old (odd ratio [OR] = 7.388, 95% confidence interval [CI] = 5.561–9.816, P < 0.001). Prepregnancy obese women had a 2-fold increased risk of CS delivery compared with prepregnancy normal weight women (OR = 2.058, 95% CI = 1.640–2.584, P < 0.001). The excessive weight gain group had a 1.4-fold increased risk of CS delivery compared with the adequate weight gain group (OR = 1.422, 95% CI = 1.289–1.568, P < 0.001). Gestational diabetes mellitus (GDM) women and DM women had an increased risk of CS delivery (1.2- and 1.7-fold, respectively) compared with normal blood glucose women. Women who were born in rural areas had a lower risk of CS delivery than did those who were born in urban areas (OR = 0.696, 95% CI = 0.625–0.775, P < 0.001). The risk of CS delivery gradually increased with a decreasing education level. Neonates weighing 3000–3499 g had the lowest CSR (36.2%). Neonates weighing <2500 g had a 2-fold increased risk of CS delivery compared with neonates weighing 3000–3499 g (OR = 2.020, 95% CI = 1.537–2.656, P < 0.001). Neonates weighing ≥4500 g had an 8.3-fold increased risk of CS delivery compared with neonates weighing 3000–3499 g (OR = 8.313, 95% CI = 4.436–15.579, P < 0.001). Conclusions: Maternal age, prepregnancy body mass index, gestational weight gain, blood glucose levels, residence, education level, and singleton fetal birth weight are all factors that might significantly affect the CSR. PMID:29052558

Survey of quality defects in market beef and dairy cows and bulls sold through livestock auction markets in the Western United States: I. Incidence rates.

PubMed

Ahola, J K; Foster, H A; Vanoverbeke, D L; Jensen, K S; Wilson, R L; Glaze, J B; Fife, T E; Gray, C W; Nash, S A; Panting, R R; Rimbey, N R

2011-05-01

A survey was conducted to quantify incidence of Beef Quality Assurance (BQA)-related defects in market beef and dairy cows and bulls selling at auction during 2 seasons in 2008. Twenty-three BQA-related traits were evaluated by 9 trained personnel during sales at 10 livestock auction markets in Idaho (n = 5; beef and dairy), California, (n = 4; dairy only), and Utah (n = 1; beef and dairy). Overall, 18,949 unique lots (8,213 beef cows, 1,036 beef bulls, 9,177 dairy cows, and 523 dairy bulls,) consisting of 23,479 animals (9,299 beef cows, 1,091 beef bulls, 12,429 dairy cows, and 660 dairy bulls) were evaluated during 125 sales (64 spring, 61 fall) for dairy and 79 sales (40 spring, 39 fall) for beef. The majority of market beef cows and bulls (60.9 and 71.3%, respectively) were predominantly black-hided, and the Holstein hide pattern was observed in 95.4 and 93.6% of market dairy cows and bulls, respectively. Market cattle weighed 548 ± 103.6 kg (beef cows), 751 ± 176.1 kg (beef bulls), 658 ± 129.7 kg (dairy cows), and 731 ± 150.8 kg (dairy bulls). Most beef cows (79.6%) weighed 455 to 726 kg, and most beef bulls (73.8%) weighed 545 to 954 kg, respectively. Among market beef cattle, 16.0% of cows and 14.5% of bulls weighed less than 455 and 545 kg, respectively, and 63.7% of dairy cows and 81.5% of dairy bulls weighed 545 to 817 kg or 545 to 954 kg, respectively. However, 19.5% of dairy cows and 13.1% of dairy bulls weighed less than 545 kg. Mean BCS for beef cattle (9-point scale) was 4.7 ± 1.2 (cows) and 5.3 ± 0.9 (bulls), and for dairy cattle (5-point scale) was 2.6 ± 0.8 (cows) and 2.9 ± 0.6 (bulls). Some 16.5% of beef cows and 4.1% of beef bulls had a BCS of 1 to 3, whereas 34.8% of dairy cows and 10.4% of dairy bulls had a BCS of 2 or less. Emaciation (beef BCS = 1, dairy BCS = 1.0) or near-emaciation (beef BCS = 2, dairy BCS = 1.5) was observed in 13.3% of dairy cows and 3.9% of beef cows. Among beef cattle, 15.1% of cows and 15.4% of bulls were considered lame. In contrast, 44.7% of dairy cows and 26.1% of dairy bulls were lame. Ocular neoplasia (cancer eye) was observed in only 0.6% of beef cows, 0.3% of beef bulls, 0.3% of dairy cows, and 0.0% of dairy bulls. However, among animals with ocular neoplasia, it was cancerous in 34.4% of beef bulls, 48.0% of dairy cows, and 73.3% of beef cows. In conclusion, numerous quality defects are present in market beef and dairy cattle selling at auction in the Western United States, which could influence their value at auction.

49 CFR 1220.0 - Applicability.

Code of Federal Regulations, 2013 CFR

2013-10-01

... companies Electric railway companies Express companies Persons furnishing cars to railroads Ratemaking... associations, demurrage and car service bureaus, weighing and inspection bureaus, and other joint activities...

49 CFR 1220.0 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-10-01

... companies Electric railway companies Express companies Persons furnishing cars to railroads Ratemaking... associations, demurrage and car service bureaus, weighing and inspection bureaus, and other joint activities...

49 CFR 1220.0 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-10-01

... companies Electric railway companies Express companies Persons furnishing cars to railroads Ratemaking... associations, demurrage and car service bureaus, weighing and inspection bureaus, and other joint activities...

49 CFR 1220.0 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-10-01

... companies Electric railway companies Express companies Persons furnishing cars to railroads Ratemaking... associations, demurrage and car service bureaus, weighing and inspection bureaus, and other joint activities...

49 CFR 1220.0 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-10-01

... companies Electric railway companies Express companies Persons furnishing cars to railroads Ratemaking... associations, demurrage and car service bureaus, weighing and inspection bureaus, and other joint activities...

The weight distribution of coarse particulate organic matter exported from an alpine headwater stream

NASA Astrophysics Data System (ADS)

Turowski, Jens; Badoux, Alexandre; Bunte, Kristin; Rickli, Christian; Federspiel, Nicole

2013-04-01

Coarse particulate organic matter (CPOM) spans sizes from 1 mm particles, weighing less than 1 mg, to large logs and whole trees, which may weigh several hundred kilograms. Different size and weight classes play different roles in stream environments, from being the prime source of energy in stream ecosystems to macroscopically determining channel morphology and local hydraulics. We show that a single scaling exponent can describe the weight distribution of CPOM transported in a mountain stream. This exponent is independent of discharge and valid for particle weights spanning almost seven orders of magnitude. Together with a rating curve of CPOM transport rates with discharge, we discuss the importance of the scaling exponent for measuring strategies, natural hazard mitigation and ecosystems.

Design and Development of an Optical Path Difference Scan Mechanism for Fourier Transform Spectrometers using High Displacement RAINBOW Actuators

NASA Technical Reports Server (NTRS)

Wise, Stephanie A.; Hardy, Robin C.; Dausch, David E.

1997-01-01

A new piezoelectric drive mechanism has been developed for optical translation in space-based spectrometer systems. The mechanism utilizes a stack of RAINBOW high displacement piezoelectric actuators to move optical components weighing less than 250 grams through a one centimeter travel. The mechanism uses the direct motion of the piezoelectric devices, stacked such that the displacement of the individual RAINBOW actuators is additive. A prototype device has been built which utilizes 21 RAINBOWs to accomplish the necessary travel. The mechanism weighs approximately 0.6 kilograms and uses less than 2 Watts of power at a scanning frequency of 0.5 Hertz, significantly less power than that required by state-of-the-art motor systems.

System and method for weighing and characterizing moving or stationary vehicles and cargo

DOEpatents

Beshears, David L [Knoxville, TN; Scudiere, Matthew B [Oak Ridge, TN; White, Clifford P [Seymour, TN

2008-05-20

A weigh-in-motion device and method having at least one transducer pad, each transducer pad having at least one transducer group with transducers positioned essentially perpendicular to the direction of travel. At least one pad microcomputer is provided on each transducer pad having a means for calculating first output signal indicative of weight, second output signal indicative of time, and third output signal indicative of speed. At least one host microcomputer is in electronic communication with each pad microcomputer, and having a means for calculating at least one unknown selected from the group consisting of individual tire weight, individual axle weight, axle spacing, speed profile, longitudinal center of balance, and transverse center of balance.

77 FR 51042 - Endangered Species Recovery Permit Applications

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-23

..., weigh, mark, voucher, collect tissue, relocate, and release) the Shasta crayfish (Pacifastacus fortis.... TE-034101 Applicant: Naval Facilities Engineering Command Southwest, San Diego, California The...

40 CFR 1504.2 - Criteria for referral.

Code of Federal Regulations, 2011 CFR

2011-07-01

... possible in the process), but unsuccessful attempts to resolve differences with the lead agency. In... should weigh potential adverse environmental impacts, considering: (a) Possible violation of national...

40 CFR 1504.2 - Criteria for referral.

Code of Federal Regulations, 2013 CFR

2013-07-01

... possible in the process), but unsuccessful attempts to resolve differences with the lead agency. In... should weigh potential adverse environmental impacts, considering: (a) Possible violation of national...

40 CFR 1504.2 - Criteria for referral.

Code of Federal Regulations, 2014 CFR

2014-07-01

... possible in the process), but unsuccessful attempts to resolve differences with the lead agency. In... should weigh potential adverse environmental impacts, considering: (a) Possible violation of national...

40 CFR 1504.2 - Criteria for referral.

Code of Federal Regulations, 2012 CFR

2012-07-01

... possible in the process), but unsuccessful attempts to resolve differences with the lead agency. In... should weigh potential adverse environmental impacts, considering: (a) Possible violation of national...

40 CFR 1504.2 - Criteria for referral.

Code of Federal Regulations, 2010 CFR

2010-07-01

... possible in the process), but unsuccessful attempts to resolve differences with the lead agency. In... should weigh potential adverse environmental impacts, considering: (a) Possible violation of national...

77 FR 73988 - Marine Mammals; File No. 17152

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-12

... authorized to capture, mark, weigh, and sample (swabs and blood) northern elephant seals (Mirounga angustirostris); and incidentally harass elephant seals during captures and ground monitoring/photo...

Do digestive contents confound body mass as a measure of relative condition in nestling songbirds?

USGS Publications Warehouse

Streby, Henry M.; Peterson, Sean M.; Lehman, Justin A.; Kramer, Gunnar R.; Vernasco, Ben J.; Andersen, David E.

2014-01-01

Relative nestling condition, typically measured as nestling mass or as an index including nestling mass, is commonly purported to correlate with fledgling songbird survival. However, most studies directly investigating fledgling survival have found no such relationship. We weighed feces and stomach contents of nestling golden-winged warblers (Vermivora chrysoptera) to investigate the potential contribution of variation in digestive contents to differences in nestling mass. We estimated that the mass of a seventh-day (near fledging) nestling golden-winged warbler varies by 0.65 g (approx. 9% of mean nestling mass) depending on the contents of the nestling's digestive system at the time of weighing, and that digestive contents are dissimilar among nestlings at any moment the brood is removed from the nest for weighing. Our conservative estimate of within-individual variation in digestive contents equals 72% and 24% of the mean within-brood and population-wide range in nestling mass, respectively. Based on our results, a substantive but typically unknown amount of the variation in body mass among nestlings is confounded by differences in digestive contents. We conclude that short-term variation in digestive contents likely precludes the use of body mass, and therefore any mass-dependent index, as a measure of relative nestling condition or as a predictor of survival in golden-winged warblers and likely in many other songbirds of similar size.

Weighing the Social and Ethical Considerations of Maternal-Fetal Surgery.

PubMed

Antiel, Ryan M; Flake, Alan W; Collura, Christopher A; Johnson, Mark P; Rintoul, Natalie E; Lantos, John D; Curlin, Farr A; Tilburt, Jon C; Brown, Stephen D; Feudtner, Chris

2017-12-01

The ethics of maternal-fetal surgery involves weighing the importance of potential benefits, risks, and other consequences involving the pregnant woman, fetus, and other family members. We assessed clinicians' ratings of the importance of 9 considerations relevant to maternal-fetal surgery. This study was a discrete choice experiment contained within a 2015 national mail-based survey of 1200 neonatologists, pediatric surgeons, and maternal-fetal medicine physicians, with latent class analysis subsequently used to identify groups of physicians with similar ratings. Of 1176 eligible participants, 660 (56%) completed the discrete choice experiment. The highest-ranked consideration was of neonatal benefits, which was followed by consideration of the risk of maternal complications. By using latent class analysis, we identified 4 attitudinal groups with similar patterns of prioritization: "fetocentric" ( n = 232), risk-sensitive ( n = 197), maternal autonomy ( n = 167), and family impact and social support ( n = 64). Neonatologists were more likely to be in the fetocentric group, whereas surgeons were more likely to be in the risk-sensitive group, and maternal-fetal medicine physicians made up the largest percentage of the family impact and social support group. Physicians vary in how they weigh the importance of social and ethical considerations regarding maternal-fetal surgery. Understanding these differences may help prevent or mitigate disagreements or tensions that may arise in the management of these patients. Copyright © 2017 by the American Academy of Pediatrics.

Water absorption characteristic of interlocking compressed earth brick units

NASA Astrophysics Data System (ADS)

Bakar, B. H. Abu; Saari, S.; Surip, N. A.

2017-10-01

This study aims to investigate the water absorption characteristic of interlocking compressed earth brick (ICEB) units. Apart from compressive strength, water absorption is an important property in masonry. This property can affect the quality of the brick itself and the bond strength between the brick and mortar in masonry structures and can result in reducing its strength properties. The units were tested for 24 h water absorption and 5 h boiling water absorption. A total of 170 ICEB units from four ICEB types underwent both tests. For the 24 h water absorption, the ICEB units were dried in the oven for 24 h and then cooled before being weighed. Thereafter, each brick was immersed in water for 24 h and weighed. The same specimens used for the 24 h water absorption test were re-used for the 5 h boiling water absorption test. After completing the 24 h water absorption test, the brick was boiled for 5-hours and weighed. The highest water absorption for the ICEBs in the 24-hour water absorption and 5 h boiling water absorption tests are 15.09% and 17.18%, respectively. The half brick has the highest water absorption (15.87%), whereas the beam brick has the lowest (13.20%). The water absorption of an ICEB unit is higher than that of normal bricks, although the water absorption of the former remains below the maximum rate of the brick water absorption (21%).

The incremental value of troponin biomarkers in risk stratification of acute coronary syndromes: is the relationship multiplicative?

PubMed

Amin, Amit P; Nathan, Sandeep; Vassallo, Patricia; Calvin, James E

2009-05-20

To emphasize the importance of troponin in the context of a new score for risk stratifying acute coronary syndromes (ACS) patients. Although troponins have powerful prognostic value, current ACS scores do not fully capitalize this prognostic ability. Here, we weigh troponin status in a multiplicative manner to develop the TRACS score from previously published Rush score risk factors (RRF). 2,866 ACS patients (46.7% troponin positive) from 9 centers comprising the TRACS registry, were randomly split into derivation (n=1,422) and validation (n=1,444) cohorts. In the derivation sample, RRF sum was multiplied by 3 if troponins were positive to yield the TRACS score, which was grouped into five categories of 0-2, 3-5, 6-8, 9-11, 12-15 (multiples of 3). Predictive performance of this score to predict hospital death was ascertained in the validation sample. The TRACS score had ROC AUC of 0.71 in the validation cohort. Logistic regression, Kaplan-Meier analysis, likelihood-ratio and Bayesian Information Criterion (BIC) test indicated that weighing troponin status with 3 in the TRACS score improved the prediction of mortality. Hosmer-Lemeshow test indicated sound model fit. We demonstrate that weighing troponin as a multiple of 3 yields robust prognostication of hospital mortality in ACS patients, when used in the context of the TRACS score.

The Incremental Value of Troponin Biomarkers in Risk Stratification of Acute Coronary Syndromes: Is the Relationship Multiplicative?

PubMed Central

Amin, Amit P; Nathan, Sandeep; Vassallo, Patricia; Calvin, James E

2009-01-01

Structured Abstract Objective: To emphasize the importance of troponin in the context of a new score for risk stratifying acute coronary syndromes (ACS) patients. Although troponins have powerful prognostic value, current ACS scores do not fully capitalize this prognostic ability. Here, we weigh troponin status in a multiplicative manner to develop the TRACS score from previously published Rush score risk factors (RRF). Methods: 2,866 ACS patients (46.7% troponin positive) from 9 centers comprising the TRACS registry, were randomly split into derivation (n=1,422) and validation (n=1,444) cohorts. In the derivation sample, RRF sum was multiplied by 3 if troponins were positive to yield the TRACS score, which was grouped into five categories of 0-2, 3-5, 6-8, 9-11, 12-15 (multiples of 3). Predictive performance of this score to predict hospital death was ascertained in the validation sample. Results: The TRACS score had ROC AUC of 0.71 in the validation cohort. Logistic regression, Kaplan-Meier analysis, likelihood-ratio and Bayesian Information Criterion (BIC) test indicated that weighing troponin status with 3 in the TRACS score improved the prediction of mortality. Hosmer-Lemeshow test indicated sound model fit. Conclusions: We demonstrate that weighing troponin as a multiple of 3 yields robust prognostication of hospital mortality in ACS patients, when used in the context of the TRACS score. PMID:19557150

Antenatal Weight Management: Women's Experiences, Behaviours, and Expectations of Weighing in Early Pregnancy.

PubMed

Swift, J A; Pearce, J; Jethwa, P H; Taylor, M A; Avery, A; Ellis, S; Langley-Evans, S C; McMullen, S

2016-01-01

The current emphasis on obstetric risk management helps to frame gestational weight gain as problematic and encourages intervention by healthcare professionals. However pregnant women have reported confusion, distrust, and negative effects associated with antenatal weight management interactions. The MAGIC study (MAnaging weiGht In pregnanCy) sought to examine women's self-reported experiences of usual-care antenatal weight management in early pregnancy and consider these alongside weight monitoring behaviours and future expectations. 193 women (18 yrs+) were recruited from routine antenatal clinics at the Nottingham University Hospital NHS Trust. Self-reported gestation was 10-27 weeks, with 41.5% ( n = 80) between 12 and 14 and 43.0% ( n = 83) between 20 and 22 weeks. At recruitment 50.3% of participants ( n = 97) could be classified as overweight or obese. 69.4% of highest weight women (≥30 kg/m 2 ) did not report receiving advice about weight, although they were significantly more likely compared to women with BMI < 30 kg/m 2 . The majority of women (regardless of BMI) did not express any barriers to being weighed and 40.8% reported weighing themselves at home. Women across the BMI categories expressed a desire for more engagement from healthcare professionals on the issue of bodyweight. Women are clearly not being served appropriately in the current situation which simultaneously problematizes and fails to offer constructive dialogue.

Outbreak of Occupational Dermatitis Associated With Pyemotes ventricosus

PubMed Central

Jędrzejewska-Jurga, Katarzyna; Limburska, Joanna; Tomczyk, Jarosław

2017-01-01

Importance Although Pyemotes species have been known to cause dermatitis, recent reports are rare. During the past 30 years, only 3 outbreaks of dermatitis caused by Pyemotes ventricosus have been reported. Objective To analyze the causative agent of skin changes in employees of a company that produced herbal medicines. Design, Setting, and Participants This case series includes 18 patients (8 men, 10 women; mean age, 44 years) who contracted unusual dermatitis after an occupational exposure in July and August of 2012 while working for a company that produced herbal medicines. The patients were examined at the Lower Silesia Regional Centre of Occupational Medicine in Wroclaw, Poland. Exposures Workers weighed and packed 1 part of the Helichrysum arenarium herb. Main Outcomes and Measures We hypothesized the causative agent to be P ventricosus. An examination of the herbal specimens for ectoparasites confirmed the diagnosis. Results Initially 16 employees developed pruritic skin changes. Skin lesions with pruritic vesicles on an erythematous base with surrounding swelling and edema were observed. Several employees also developed a flulike illness. After 44 days, 2 new employees presented with the same skin changes. The analysis of working conditions showed that the same part of the H arenarium herb was weighed and packed at that time. Conclusions and Relevance We found that changing the time when the herbs were weighed and abandoning gas fumigation containing methyl bromide resulted in the recurrence of an almost forgotten disease. PMID:28445563

Blood Density Is Nearly Equal to Water Density: A Validation Study of the Gravimetric Method of Measuring Intraoperative Blood Loss.

PubMed

Vitello, Dominic J; Ripper, Richard M; Fettiplace, Michael R; Weinberg, Guy L; Vitello, Joseph M

2015-01-01

Purpose. The gravimetric method of weighing surgical sponges is used to quantify intraoperative blood loss. The dry mass minus the wet mass of the gauze equals the volume of blood lost. This method assumes that the density of blood is equivalent to water (1 gm/mL). This study's purpose was to validate the assumption that the density of blood is equivalent to water and to correlate density with hematocrit. Methods. 50 µL of whole blood was weighed from eighteen rats. A distilled water control was weighed for each blood sample. The averages of the blood and water were compared utilizing a Student's unpaired, one-tailed t-test. The masses of the blood samples and the hematocrits were compared using a linear regression. Results. The average mass of the eighteen blood samples was 0.0489 g and that of the distilled water controls was 0.0492 g. The t-test showed P = 0.2269 and R (2) = 0.03154. The hematocrit values ranged from 24% to 48%. The linear regression R (2) value was 0.1767. Conclusions. The R (2) value comparing the blood and distilled water masses suggests high correlation between the two populations. Linear regression showed the hematocrit was not proportional to the mass of the blood. The study confirmed that the measured density of blood is similar to water.

Comparison of hydrostatic weighing at residual volume and total lung capacity.

PubMed

Weltman, A; Katch, V

1981-01-01

Hydrostatic weighing (HW) was performed at both residual volume (RV) and total lung capacity (TLC) (both measured on land) to determine if underwater weighting at extreme lung volumes affected the measurement of body density. Subjects were 72 middle-aged males (mean age = 43.4 yr) and 51 middle-aged females (mean age = 40.2 yr). Subjects were first assessed for underwater weight at RV for at least 10 trials. Subjects were than instructed to inspire maximally and hold their breath underwater for as long as they could. Three trials at TLC were used for assessment of underwater weight. Forced vital capacity and residual volume (oxygen dilution) were determined separately on land. Small but statistically significant differences in body density (Db) were observed with the use of RV (1.0354 g/ml for men and 1.0196 g/ml for women) vs TLC (1.0367 g/ml for men and 1.0221 g/ml for women) (p less than 0.05). Percent fat values for the RV and TLD data differed by only 0.5% for men and 0.9% for women. Results indicated that the difference between percent fat determination by HW at RV and TLC, was negligible. It was concluded that HW at TLC may be the method of choice for subjects who are uncomfortable with performing the technique of underwater weighing at RV.

Boxing fatalities in relation to rule changes in Japan: secondary data analysis.

PubMed

Teramoto, Masaru; Cross, Chad L; Cushman, Daniel M; Willick, Stuart E

2018-01-18

To examine whether changing weigh-in from the same day of the match to the day before the match and prohibiting 6-oz gloves are associated with fatalities in boxing matches sanctioned by the Japan Boxing Commission (JBC). We analyzed the rates of boxing fatalities before and after the two rule changes above via secondary analysis of data. Demographics and boxing records of deceased boxers were examined using descriptive statistics, exact binomial test the Mann-Whitney-Wilcoxon test and Fisher's exact tests. As of this study, a total of 38 boxers (23.9 ± 3.3 years of age) reportedly died due to injuries sustained in JBC-sanctioned boxing matches since 1952. Changing weigh-in to the day before the match or prohibiting 6-oz gloves was not significantly associated with the rates of boxing fatalities 5 years and 10 years before and after the rule changes (p > 0.05). Deceased boxers after these rule changes were significantly older, completed significantly more rounds in the final match, and were significantly less likely to lose the previous match (prior to the final match) and to do so by knockouts (p < 0.05). Changing weigh-in to the day before the match and prohibiting 6-oz gloves may not result in reducing boxing fatalities.

Ultrasound-Guided Liver Biopsy With Gelatin Sponge Pledget Tract Embolization in Infants Weighing Less Than 10 kg.

PubMed

Lungren, Matthew P; Lindquester, Will S; Seidel, Frank Glen; Kothary, Nishita; Monroe, Eric J; Shivaram, Giri; Gill, Anne E; Hawkins, Matthew C

2016-12-01

The aim of the study was to describe and assess the technical success and safety of ultrasound-guided liver biopsy with gelatin sponge pledget tract embolization technique in infants <10 kg across 3 tertiary pediatric hospitals. There were 67 pediatric patients weighing <10 kg (36 boys; 31 girls; average age 202 days; average weight 6 kg, range 1.5-9.9 kg) referred for liver biopsy performed with ultrasound guidance and gelatin sponge pledget tract embolization during a 2-year period. Patient history, procedural records, and clinical follow-up documents were retrospectively reviewed. A total of 67 procedures were included. There was 100% technical success rate and all samples obtained provided adequate tissue for histological assessment. Average number of 18 G biopsy passes was 3 (range 1-6). There were no procedure-related deaths. There was 1 complication (1%) in a 5-kg infant who was readmitted 36 hours after biopsy with a fever and fully recovered after antibiotics were administered. Biliary atresia was the most common underlying diagnosis (20%), whereas others included acute rejection (16%) and biliary obstruction (7%). Ultrasound-guided percutaneous liver biopsy with gelatin sponge pledget tract embolization technique in children weighing <10 kg is safe, effective, and use of this technique may lead to a reduction in rates of adverse events reported in other pediatric series.

75 FR 26715 - Endangered Species; File No. 1596

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-12

... hereby given that NMFS Southwest Fisheries Science Center (SWFSC) [Responsible Party: Lisa Ballance..., measure, weigh, blood and tissue sample, photograph, flipper and PIT tag, fat biopsy, ultrasound...

Weighing the Claims in Diet Ads

MedlinePlus

... 2012 You Might Also Like Joining a Gym "Free" Trial Offers? Indoor Tanning Anti-Aging Products Search form Search menu Money & Credit Homes & Mortgages Health & Fitness Healthy Living Treatments & ...

Obesity

MedlinePlus

Obesity means having too much body fat. It is different from being overweight, which means weighing too ... what's considered healthy for his or her height. Obesity happens over time when you eat more calories ...

29 CFR 780.151 - Particular operations on commodities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT... 3(f): (a) Grain, seed, and forage crops. Weighing, binning, stacking, drying, cleaning, grading...

29 CFR 780.151 - Particular operations on commodities.

Code of Federal Regulations, 2013 CFR

2013-07-01

... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT... 3(f): (a) Grain, seed, and forage crops. Weighing, binning, stacking, drying, cleaning, grading...

29 CFR 780.151 - Particular operations on commodities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT... 3(f): (a) Grain, seed, and forage crops. Weighing, binning, stacking, drying, cleaning, grading...

29 CFR 780.151 - Particular operations on commodities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT... 3(f): (a) Grain, seed, and forage crops. Weighing, binning, stacking, drying, cleaning, grading...

29 CFR 780.151 - Particular operations on commodities.

Code of Federal Regulations, 2012 CFR

2012-07-01

... AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT... 3(f): (a) Grain, seed, and forage crops. Weighing, binning, stacking, drying, cleaning, grading...

Cardiac Amyloidosis

MedlinePlus

... adding salt to food, and avoiding eating in restaurants. Daily weighing can be helpful: a weight gain ... effective but toxic therapy, and very careful patient selection is needed. View this table: View inline View ...

20 CFR 220.14 - Weighing of evidence.

Code of Federal Regulations, 2013 CFR

2013-04-01

... capacity evaluation is based upon functional objective tests with high validity and reliability; (2) The... exam findings which is indicative of exaggerated or potential malingering response; (6) The evidence...

20 CFR 220.14 - Weighing of evidence.

Code of Federal Regulations, 2011 CFR

2011-04-01

... capacity evaluation is based upon functional objective tests with high validity and reliability; (2) The... exam findings which is indicative of exaggerated or potential malingering response; (6) The evidence...

20 CFR 220.14 - Weighing of evidence.

Code of Federal Regulations, 2014 CFR

2014-04-01

... capacity evaluation is based upon functional objective tests with high validity and reliability; (2) The... exam findings which is indicative of exaggerated or potential malingering response; (6) The evidence...

20 CFR 220.14 - Weighing of evidence.

Code of Federal Regulations, 2012 CFR

2012-04-01

... capacity evaluation is based upon functional objective tests with high validity and reliability; (2) The... exam findings which is indicative of exaggerated or potential malingering response; (6) The evidence...

Reference Gauging System for a Small-Scale Liquid Hydrogen Tank

NASA Technical Reports Server (NTRS)

VanDresar, Neil T.; Siegwarth, James D.

2003-01-01

A system to accurately weigh the fluid contents of a small-scale liquid hydrogen test tank has been experimentally verified. It is intended for use as a reference or benchmark system when testing lowgravity liquid quantity gauging concepts in the terrestrial environment. The reference gauging system has shown a repeatable measurement accuracy of better than 0.5 percent of the full tank liquid weight. With further refinement, the system accuracy can be improved to within 0.10 percent of full scale. This report describes the weighing system design, calibration, and operational results. Suggestions are given for further refinement of the system. An example is given to illustrate additional sources of uncertainty when mass measurements are converted to volume equivalents. Specifications of the companion test tank and its multi-layer insulation system are provided.

SMAP During Weighing

NASA Image and Video Library

2014-11-07

NASA's Soil Moisture Active Passive, or SMAP, spacecraft is lifted from its workstand in the clean room of the Astrotech payload processing facility on Vandenberg Air Force Base in California during operations to determine its weight. The weighing of a spacecraft is standard procedure during prelaunch processing. SMAP will launch on a Delta II 7320 configuration vehicle featuring a United Launch Alliance first stage booster powered by an Aerojet Rocketdyne RS-27A main engine and three Alliant Techsystems, or ATK, strap-on solid rocket motors. Once on station in Earth orbit, SMAP will provide global measurements of soil moisture and its freeze/thaw state. NASA's Jet Propulsion Laboratory that built the observatory and its radar instrument also is responsible for SMAP project management and mission operations. Launch from Space Launch Complex 2 is targeted for Jan. 29, 2015.

Calculating Measurement Uncertainty of the “Conventional Value of the Result of Weighing in Air”

DOE PAGES

Flicker, Celia J.; Tran, Hy D.

2016-04-02

The conventional value of the result of weighing in air is frequently used in commercial calibrations of balances. The guidance in OIML D-028 for reporting uncertainty of the conventional value is too terse. When calibrating mass standards at low measurement uncertainties, it is necessary to perform a buoyancy correction before reporting the result. When calculating the conventional result after calibrating true mass, the uncertainty due to calculating the conventional result is correlated with the buoyancy correction. We show through Monte Carlo simulations that the measurement uncertainty of the conventional result is less than the measurement uncertainty when reporting true mass.more » The Monte Carlo simulation tool is available in the online version of this article.« less

Balloon platform for extended-life astronomy research

NASA Technical Reports Server (NTRS)

Ostwald, L. T.

1974-01-01

A configuration has been developed for a long-life balloon platform to carry pointing telescopes weighing as much as 80 pounds (36 kg) to point at selected celestial targets. A platform of this configuration weighs about 375 pounds (170 kg) gross and can be suspended from a high altitude super pressure balloon for a lifetime of several months. The balloon platform contains a solar array and storage batteries for electrical power, up and down link communications equipment, and navigational and attitude control systems for orienting the scientific instrument. A biaxial controller maintains the telescope attitude in response to look-angle data stored in an on-board computer memory which is updated periodically by ground command. Gimbal angles are computed by using location data derived by an on-board navigational receiver.

Portable pallet weighing apparatus

NASA Technical Reports Server (NTRS)

Day, R. M. (Inventor)

1984-01-01

An assembly for use with several like units in weighing the mass of a loaded cargo pallet supported by its trunnions has a bridge frame for positioning the assembly on a transportation frame carrying the pallet while straddling one trunnion of the pallet and its trunnion lock, and a cradle assembly for incrementally raising the trunnion. The mass at the trunnion is carried as a static load by a slidable bracket mounted upon the bridge frame for supporting the cradle assembly. The bracket applies the static loading to an electrical load cell symmetrically positioned between the bridge frame and the bracket. The static loading compresses the load cell, causing a slight deformation and a potential difference at load cell terminals which is proportional in amplitude to the mass of the pallet at the trunnion.

KSC-99pp1239

NASA Image and Video Library

1999-10-14

KENNEDY SPACE CENTER, FLA. — Two 34-year-old towers on Launch Complex 41, Cape Canaveral Air Station, fall to the ground amid the black smoke from explosives set to topple them. Weighing two million pounds, the umbilical tower (left) was approximately 200 feet high. The taller 300-foot Mobile Service Tower (right) weighs five million pounds. About 200 pounds of linear-shaped charges were used to topple the towers so that the materials can be recycled. Adjacent to the towers are lightning protection structures, which will remain on the site. The towers are being demolished to make room for Lockheed Martin's 14-acre Vehicle Integration Facility (VIF), under construction. The implosion and removal of the tower debris is expected to be completed in two months. The VIF will be used for Lockheed Martin's Atlas V Launch System.

KSC-99pp1238

NASA Image and Video Library

1999-10-14

KENNEDY SPACE CENTER, FLA. — Two 34-year-old towers on Launch Complex 41, Cape Canaveral Air Station, lie on the ground amid the black smoke from explosives set to topple them. Weighing two million pounds, the umbilical tower (left) was approximately 200 feet high. The taller 300-foot Mobile Service Tower (right) weighs five million pounds. About 200 pounds of linear-shaped charges were used to topple the towers so that the materials can be recycled. Adjacent to the towers are lightning protection structures, which will remain on the site. The towers are being demolished to make room for Lockheed Martin's 14-acre Vehicle Integration Facility (VIF), under construction. The implosion and removal of the tower debris is expected to be completed in two months. The VIF will be used for Lockheed Martin's Atlas V Launch System.

Biotelemetry implant volume and weight in rats: A pilot study report

NASA Technical Reports Server (NTRS)

Somps, Chris J.

1994-01-01

This paper reports the results of a pilot study in which a 240-gram rat was implanted for 41 days with biotelemetry devices weighing a total of 36 gm (18 cc). The implanted animal showed no differences in weight gain, food and water consumption, and postnecropsy organ weights when compared to both an unoperated control animal and an animal that underwent surgery but did not receive an implant. The implanted animal also had temperature and activity rhythms similar to those reported using much smaller implants. Thus, this pilot study showed that a 240-gm rat could be implanted with biotelemetry devices weighing nearly 15 percent of body weight without significant changes in health or behavior. A larger study involving more animals and similar implant sizes is recommended.

SIDE VIEW OF PREPARATION FOR PULLING CONTINUOUSLYCAST "CAKES" FROM MOLDS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

SIDE VIEW OF PREPARATION FOR PULLING CONTINUOUSLY-CAST "CAKES" FROM MOLDS AT #03 STATION. WHEN THE CAKES HAVE COOLED SUFFICIENTLY, THE CASTER STATION IS MOVED ASIDE TO EXPOSE THE QUENCH TANK AND MOLDS. EACH CAKE OF THE THREE CAKES WEIGHS UP TO APPROXIMATELY 20,000. THE DIMENSIONS OF BRASS CAKES RANGE UP TO 27 1\\2" WIDE X 6 3\\4" THICK X 25' LONG, CORRESPONDING MAXIMUMS FOR COPPER CAKES ARE 37 1\\2" X 5" X 24'. #01 STATION, DATING FROM THE EARLY 1960'S CASTS ONLY A SINGLE BAR (RATHER THAN THREE SIMULTANEOUSLY), THAT IS APPROXIMATELY HALF THE LENGTH OF CAKES FROM THE OTHER STATIONS (150' V. 300") AND WEIGHS UP TO 12,500 LBS. - American Brass Foundry, 70 Sayre Street, Buffalo, Erie County, NY

SIDE VIEW OF PREPARATION FOR PULLING CONTINUOUSLYCAST "CAKES" FROM MOLDS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

SIDE VIEW OF PREPARATION FOR PULLING CONTINUOUSLY-CAST "CAKES" FROM MOLDS AT #03 STATION. WHEN THE CAKES HAVE COOLED SUFFICIENTLY, THE CASTER STATION IS MOVED ASIDE TO EXPOSE THE QUENCH TANK AND MOLDS. EACH CAKE OF THE THREE CAKES WEIGHS UP TO APPROXIMATELY 20,000 LBS THE DIMENSIONS OF BRASS CAKES RANGE UP TO 27 1\\2" WIDE X 6 3\\4" THICK X 25' LONG, CORRESPONDING MAXIMUMS FOR COPPER CAKES ARE 37 1\\2" X 5" X 24'. #01 STATION, DATING FROM THE EARLY 1960'S CASTS ONLY A SINGLE BAR (RATHER THAN THREE SIMULTANEOUSLY), THAT IS APPROXIMATELY HALF THE LENGTH OF CAKES FROM THE OTHER STATIONS (150' V. 300") AND WEIGHS UP TO 12,500 LBS. - American Brass Foundry, 70 Sayre Street, Buffalo, Erie County, NY

The Precision Field Lysimeter Concept

NASA Astrophysics Data System (ADS)

Fank, J.

2009-04-01

The understanding and interpretation of leaching processes have improved significantly during the past decades. Unlike laboratory experiments, which are mostly performed under very controlled conditions (e.g. homogeneous, uniform packing of pre-treated test material, saturated steady-state flow conditions, and controlled uniform hydraulic conditions), lysimeter experiments generally simulate actual field conditions. Lysimeters may be classified according to different criteria such as type of soil block used (monolithic or reconstructed), drainage (drainage by gravity or vacuum or a water table may be maintained), or weighing or non-weighing lysimeters. In 2004 experimental investigations have been set up to assess the impact of different farming systems on groundwater quality of the shallow floodplain aquifer of the river Mur in Wagna (Styria, Austria). The sediment is characterized by a thin layer (30 - 100 cm) of sandy Dystric Cambisol and underlying gravel and sand. Three precisely weighing equilibrium tension block lysimeters have been installed in agricultural test fields to compare water flow and solute transport under (i) organic farming, (ii) conventional low input farming and (iii) extensification by mulching grass. Specific monitoring equipment is used to reduce the well known shortcomings of lysimeter investigations: The lysimeter core is excavated as an undisturbed monolithic block (circular, 1 m2 surface area, 2 m depth) to prevent destruction of the natural soil structure, and pore system. Tracing experiments have been achieved to investigate the occurrence of artificial preferential flow and transport along the walls of the lysimeters. The results show that such effects can be neglected. Precisely weighing load cells are used to constantly determine the weight loss of the lysimeter due to evaporation and transpiration and to measure different forms of precipitation. The accuracy of the weighing apparatus is 0.05 kg, or 0.05 mm water equivalent respectively. The different soil horizons in the lysimeters are equipped with sensors to measure soil temperature, water content and soil tension. Suction cups are used to get soil water samples. The lower boundary of the lysimeter is designed to maintain equilibrium between the suction applied to the leachate collection system and soil matrix potential thus the suction applied may vary depending on natural conditions - measured using tensiometers - in the field. The lysimeters are built in directly in a test area of 1000 m2 with the same vegetation to prevent island effects on evotranspiration. The topmost part of the lysimeter is realized as a removable ring that mechanical cultivation is possible in the same manner as at the test field. In this presentation the concept and the implementation of the Precision Field Lysimeter is shown. First results on water and solute balances of a 4 years investigation period are discussed.

23 CFR 772.19 - Construction noise.

Code of Federal Regulations, 2011 CFR

2011-04-01

... during the project development studies. (b) Determine the measures which are needed in the plans and... shall include a weighing of the benefits achieved and the overall adverse social, economic and...

23 CFR 772.19 - Construction noise.

Code of Federal Regulations, 2010 CFR

2010-04-01

... during the project development studies. (b) Determine the measures which are needed in the plans and... shall include a weighing of the benefits achieved and the overall adverse social, economic and...

76 FR 58471 - Endangered Species; File No. 15634

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-21

... NMFS Southwest Fisheries Science Center (SWFSC), 3333 N. Torrey Pines Ct., La Jolla, CA 92037...; weigh; flipper and passive integrated transponder tag; ultrasound; tissue, blood, cloacal swab and fat...

Obesity in Children

MedlinePlus

Obesity means having too much body fat. It is different from being overweight, which means weighing too ... always easy to know when a child has obesity or is overweight. Ask your health care provider ...

Preventing Children's Sports Injuries

MedlinePlus

... whether it's recreational bike riding or Pee-Wee football, can teach kids to stretch their limits and ... collision between two 8-year-old Pee-Wee football players who weigh 65 or 70 pounds each ...

Students 'Weigh' Atmospheric Pollution.

ERIC Educational Resources Information Center

Caporaloni, Marina

1998-01-01

Describes a procedure developed by students that measures the mass concentration of particles in a polluted urban atmosphere. Uses a portable fan and filters of various materials. Compares students' data with official data. (DDR)

Smart roadside initiative : system design document.

DOT National Transportation Integrated Search

2015-09-01

This document describes the software design for the Smart Roadside Initiative (SRI) for the delivery of capabilities related to wireless roadside inspections, electronic screening/virtual weigh stations, universal electronic commercial vehicle identi...

20 CFR 220.14 - Weighing of evidence.

Code of Federal Regulations, 2010 CFR

2010-04-01

... capacity evaluation is based upon functional objective tests with high validity and reliability; (2) The... consists of objective findings of exams that have poor reliability or validity; (7) The evidence consists...

Smart roadside initiative : system requirements specifications.

DOT National Transportation Integrated Search

2015-09-01

This document describes the system requirements specifications (SyRS) for the Smart Roadside Initiative (SRI) Prototype for the delivery of capabilities related to wireless roadside inspections, electronic screening/virtual weigh stations, universal ...

40 CFR 255.10 - Criteria for identifying regions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the State plan. (2) Boundary selection which would require the creation of new agencies should be... configuration should be considered, weighing transportation costs against economies of scale. (2) Left-over...

Long-term functional outcomes after radical cystectomy with ileal bladder substitute: does the definition of continence matter?

PubMed

Liedberg, Fredrik; Ahlgren, Göran; Baseckas, Gediminas; Gudjonsson, Sigurdur; Håkansson, Ulf; Lindquist, Sara; Löfgren, Annica; Patschan, Oliver; Siller, Carina; Sjödahl, Gottfrid

2017-02-01

Functional outcomes after ileal bladder substitution reflect the expectations of future patients at a particular centre. The aim of this study was to use validated questionnaires and a pad-weighing test to investigate functional outcomes after neobladder reconstruction at long-term follow-up in patients at a single centre. During 2005 - 2015, 75 patients received a Studer ileal bladder substitute at the Department of Urology, Malmö. Forty-six of these patients were alive for follow-up and were evaluated using the pad-weighing test and the International Consultation on Incontinence Questionnaire-Urinary Incontinence Short Form (ICIQ-UI-SF), the Female Sexual Function Index (FSFI) and the International Index of Erectile Function (IIEF). Five of 37 evaluable patients (14%) were considered fully continent, reporting a pad-weighing test result of 0 g and an ICIQ-UI-SF score of 0. The median ICIQ-UI-SF score was 8 [interquartile range (IQR) 3-11], and seven patients (17%) were continent according to the ICIQ-UI-SF score only. In the pad-weighing test, 28 out of 37 patients (76%) reported 0 g day-time leakage whereas only 12 out of 37 patients (32%) reported 0 g night-time leakage. At follow-up, nine out of 39 (23%) of evaluable male patients were potent. The median ICIQ-UI-SF score was significantly lower during the second half of the study period [4 (IQR 0-8) vs 10 (IQR 6-14); p = .003]. The inverse applied to the median IIEF score [5 (IQR 3-12) vs 2 (IQR 1-4); p = .02]. Functional outcomes at long-term follow-up after radical cystectomy and Studer ileal bladder substitute were at best modest in this series. Better outcomes during the second half of the study period might be explained by improved patient selection and a refined surgical technique, but possibly also by longer follow-up of patients during the first half of the period resulting in a more pronounced time-dependent decline in functional outcomes.

The application of a handheld personal digital assistant with camera and mobile phone card (Wellnavi) to the general population in a dietary survey.

PubMed

Kikunaga, Shigeshi; Tin, Tomoe; Ishibashi, Genji; Wang, Da-Hong; Kira, Shohei

2007-04-01

This study was carried out to examine first, the validity of a new dietary assessment method, a handheld personal digital assistant with camera and mobile phone card (Wellnavi), in comparison with a weighed diet record as a reference method and second, the relation between obesity and underreporting in the Wellnavi method in 27 men and 48 women volunteers aged 30-67 y from the general population. On the validity, there were significant correlations (0.32-0.75) between the daily nutrient intakes measured by the Wellnavi method and the weighed diet record method in all the subjects except for some nutrients such as iron, magnesium and vitamin E. Results similar to those from the group of all the subjects were obtained in the men's group and the women's group. In all the subjects and the men's group and the women's group, the differences in the daily nutrient intakes between the two dietary assessment methods were statistically significant. However, good agreement of the differences between the two dietary assessment methods for many daily nutrient intakes was obtained in the nonobese men. The nutrient intakes estimated by the Wellnavi method in all the subjects and the men's group and the women's group were significantly lower than those values estimated by the weighed diet record method except for some nutrients such as sodium, iron and fat-soluble vitamins. With respect to the relation between obesity and underreporting, the obesity in women was not a factor of underreporting in the Wellnavi method, but the presence of this relation was undeniable in the obese men. The reason why the values of daily nutrient intakes in the Wellnavi method were lower than those estimated by the weighed diet record method seemed to be the low quality of the digital photo of the Wellnavi instrument. By improving the digital photo quality of this instrument, the Wellnavi method could become a useful new dietary assessment method to get accurate dietary information from people of a wide range of age and occupation, and a wide variety of physical situations of subjects from the general population.

75 FR 13257 - Marine Mammals; File No. 87-1743

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-19

... life history research studies on northern elephant seals (Mirounga angustirostris) in California. The... of weaned elephant seal pups weighed, measured, and flipper tagged by 100 animals in order to study...

Ingrown Toenails in Children

MedlinePlus

... Interactive Foot Diagram Keep Your Kids Safe This Summer: Expert Weighs in on Proper Care Caring for ... can help them stay on their feet longerThe summer months are an active time for families and ...

Ticket taker automation

DOT National Transportation Integrated Search

1999-03-01

The Oregon Department of Transportation (ODOT) requires an ODOT employee to collect weigh slips from delivery vehicles on road construction. These delivery vehicles may be hauling asphalt mix or aggregates. The person, usually a temporary employee, i...

Rural ITS user needs

DOT National Transportation Integrated Search

1999-07-01

The Truck Characteristics Study seeks to develop a better understanding of the physical characteristics of the national truck fleet. With automatic vehicle classifiers (AVC) and weigh-in-motion devices (WIM), only axle spacing and weight information ...

"Weigh" to Go! Exploring Mathematical Language

ERIC Educational Resources Information Center

Adams, Thomasenia Lott; Thangata, Fiona; King, Cindy

2005-01-01

This article focuses on the dynamics of language in the context of mathematics. The interaction of everyday words and specialized mathematics vocabulary impacts students' development of mathematical understanding. (Contains 4 tables and 1 figure.)

Orbit CT scan

MedlinePlus

... You will be asked to remove jewelry and wear a hospital gown during the study. If you weigh more than 300 pounds (135 kilograms), find out if the CT machine has a weight limit. Too much weight can ...

Pregnancy and work

MedlinePlus

... may need to stop working or reduce your work hours. Most women are advised to only lift things that weigh under 20 pounds (9 kilograms) during pregnancy. Repetitively lifting heavier amounts often causes back injury or disability.

9 CFR 113.406 - Tuberculin, Intradermic.

Code of Federal Regulations, 2014 CFR

2014-01-01

... stain) or other microorganisms (Gram stain). A serial which contains microorganisms is unsatisfactory... from one source which weigh 500-700 grams at the beginning of the test and which have not been used in...

9 CFR 113.406 - Tuberculin, Intradermic.

Code of Federal Regulations, 2011 CFR

2011-01-01

... stain) or other microorganisms (Gram stain). A serial which contains microorganisms is unsatisfactory... from one source which weigh 500-700 grams at the beginning of the test and which have not been used in...

9 CFR 113.406 - Tuberculin, Intradermic.

Code of Federal Regulations, 2012 CFR

2012-01-01

... stain) or other microorganisms (Gram stain). A serial which contains microorganisms is unsatisfactory... from one source which weigh 500-700 grams at the beginning of the test and which have not been used in...

9 CFR 113.406 - Tuberculin, Intradermic.

Code of Federal Regulations, 2013 CFR

2013-01-01

... stain) or other microorganisms (Gram stain). A serial which contains microorganisms is unsatisfactory... from one source which weigh 500-700 grams at the beginning of the test and which have not been used in...

9 CFR 113.406 - Tuberculin, Intradermic.

Code of Federal Regulations, 2010 CFR

2010-01-01

... stain) or other microorganisms (Gram stain). A serial which contains microorganisms is unsatisfactory... from one source which weigh 500-700 grams at the beginning of the test and which have not been used in...

19 CFR 151.29 - Expense of unlading and handling.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Molasses § 151.29 Expense of unlading and handling. No expense incidental to the unlading, transporting, or handling of sugar, sirup, or molasses for convenient weighing, gaging, measuring, sampling, or marking...

19 CFR 151.29 - Expense of unlading and handling.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Molasses § 151.29 Expense of unlading and handling. No expense incidental to the unlading, transporting, or handling of sugar, sirup, or molasses for convenient weighing, gaging, measuring, sampling, or marking...

7 CFR 800.61 - Prohibited grain handling practices.

Code of Federal Regulations, 2010 CFR

2010-01-01

... channels, except for vegetable oil which may be used as a dust suppressant in accordance with (d)(4) of... include additional requirements for grain that is officially inspected and weighed. (3) Marketing dockage...

Weighing in on Dietary Fats

MedlinePlus

... Others Send us your comments With the winter holidays upon us, you’ll likely be surrounded by ... total fat can be especially challenging over the holidays, however. “You want to enjoy the foods and ...

10 CFR 37.11 - Specific exemptions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... sources, ion-exchange resins, or activated material that weighs less than 2,000 kg (4,409 lbs) is not... General Provisions § 37.11 Specific exemptions. (a) The Commission may, upon application of any interested...

28 CFR 42.511 - Reasonable accommodation.

Code of Federal Regulations, 2012 CFR

2012-07-01

... recipient's program or activity depends upon a case-by-case analysis weighing factors that include: (1) The... inconvenience which does not bear on the ability of the handicapped individual to perform the essential duties...

28 CFR 42.511 - Reasonable accommodation.

Code of Federal Regulations, 2013 CFR

2013-07-01

... recipient's program or activity depends upon a case-by-case analysis weighing factors that include: (1) The... inconvenience which does not bear on the ability of the handicapped individual to perform the essential duties...

28 CFR 42.511 - Reasonable accommodation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... recipient's program or activity depends upon a case-by-case analysis weighing factors that include: (1) The... inconvenience which does not bear on the ability of the handicapped individual to perform the essential duties...

28 CFR 42.511 - Reasonable accommodation.

Code of Federal Regulations, 2014 CFR

2014-07-01

... recipient's program or activity depends upon a case-by-case analysis weighing factors that include: (1) The... inconvenience which does not bear on the ability of the handicapped individual to perform the essential duties...

Freight Data Sharing Guidebook

DOT National Transportation Integrated Search

2013-01-01

Public sector freight planners depend on freight data to help identify freight transportation planning needs. Traditionally, their efforts relied on limited data sources such as vehicle counts, in/out gate information from ports, and weigh-in-motion ...