9 CFR 201.99 - Purchase of livestock by packers on a carcass grade, carcass weight, or carcass grade and weight...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Purchase of livestock by packers on a carcass grade, carcass weight, or carcass grade and weight basis. 201.99 Section 201.99 Animals and Animal... livestock by packers on a carcass grade, carcass weight, or carcass grade and weight basis. (a) Each packer...

Application of Empirical Peleg Model to Study the Water Adsorption of Full Cream Milk in Drying Process

NASA Astrophysics Data System (ADS)

Hashib, S. Abd; Rosli, H.; Suzihaque, M. U. H.; Zaki, N. A. Md; Ibrahim, U. K.

2017-06-01

The ability of spray dryer in producing full cream milk at different inlet temperatures and the effectiveness of empirical model used in order to interpret the drying process data is evaluated in this study. In this study, a lab-scale spray dryer was used to dry full cream milk into powder with inlet temperature from 100 to 160°C with a constant pump speed 4rpm. Peleg empirical model was chosen in order to manipulate the drying data into the mathematical equation. This research was carry out specifically to determine the equilibrium moisture content of full cream milk powder at various inlet temperature and to evaluate the effectiveness of Peleg empirical model equation in order to describe the moisture sorption curves for full cream milk. There were two conditions set for this experiments; in the first condition (C1), further drying process of milk powder in the oven at 98°C to 100°C while the second condition (C2) is mixing the milk powder with different salt solutions like Magnesium Chloride (MgCl), Potassium Nitrite (KNO2), Sodium Nitrite (NaNO2) and Ammonium Sulfate ((NH4)2SO4). For C1, the optimum temperature were 160°C with equilibrium moisture content at 3.16 weight dry basis and slowest sorption rates (dM/dt) at 0.0743 weight dry basis/hr. For C2, the best temperature for the mixture of dry samples with MgCl is at 115°C with equilibrium moisture content and sorption rates is -78.079 weight dry basis and 0.01 weight dry basis/hr. The best temperature for the mixture of milk powder with KNO2 is also at 115°C with equilibrium moisture content and sorption rates at -83.9645 weight dry basis and 0.0008 weight dry basis/hr respectively. For mixture of dry samples with NaNO2, the best temperature is 160°C with equilibrium moisture content and sorption rates at 84.1306 weight dry basis and 0.0013 weight dry basis/hr respectively. Lastly, the mixture of dry samples with ((NH4)2SO4 where the best temperature is at 115°C with equilibrium moisture content -83.8778 weight dry basis and sorption rates at 0.0021 weight dry basis/hr. The best temperature selected best on the lowest moisture content formed and also the slowest sorption rates.

The effect of diffuse basis functions on valence bond structural weights

NASA Astrophysics Data System (ADS)

Galbraith, John Morrison; James, Andrew M.; Nemes, Coleen T.

2014-03-01

Structural weights and bond dissociation energies have been determined for H-F, H-X, and F-X molecules (-X = -OH, -NH2, and -CH3) at the valence bond self-consistent field (VBSCF) and breathing orbital valence bond (BOVB) levels of theory with the aug-cc-pVDZ and 6-31++G(d,p) basis sets. At the BOVB level, the aug-cc-pVDZ basis set yields a counterintuitive ordering of ionic structural weights when the initial heavy atom s-type basis functions are included. For H-F, H-OH, and F-X, the ordering follows chemical intuition when these basis functions are not included. These counterintuitive weights are shown to be a result of the diffuse polarisation function on one VB fragment being spatially located, in part, on the other VB fragment. Except in the case of F-CH3, this problem is corrected with the 6-31++G(d,p) basis set. The initial heavy atom s-type functions are shown to make an important contribution to the VB orbitals and bond dissociation energies and, therefore, should not be excluded. It is recommended to not use diffuse basis sets in valence bond calculations unless absolutely necessary. If diffuse basis sets are needed, the 6-31++G(d,p) basis set should be used with caution and the structural weights checked against VBSCF values which have been shown to follow the expected ordering in all cases.

Relationship between gestational weight gain and birthweight among clients enrolled in the Special Supplemental Nutrition Program for Women, Infants, and Children (WIC), Hawaii, 2003-2005.

PubMed

Chihara, Izumi; Hayes, Donald K; Chock, Linda R; Fuddy, Loretta J; Rosenberg, Deborah L; Handler, Arden S

2014-07-01

To investigate the relationship between gestational weight gain (GWG) and birthweight outcomes among a low-income population in Hawaii using GWG recommendations from the 2009 Institute of Medicine (IOM) guidelines. Data were analyzed for 19,130 mother-infant pairs who participated in Hawaii's Special Supplemental Nutrition Program for Women, Infants, and Children from 2003 through 2005. GWG was categorized as inadequate, adequate, or excessive on the basis of GWG charts in the guidelines. Generalized logit models assessed the relationship between mothers' GWG and their child's birthweight category (low birthweight [LBW: < 2,500 g], normal birthweight [2,500 g ≤ BW < 4,000 g], or high birthweight [HBW: ≥ 4,000 g]). Final models were stratified by prepregnancy body mass index (underweight, normal weight, overweight, or obese) and adjusted for maternal age, education, race/ethnicity, smoking status, parity, and marital status. Overall, 62% of the sample had excessive weight gain and 15% had inadequate weight gain. Women with excessive weight gain were more likely to deliver a HBW infant; this relationship was observed for women in all prepregnancy weight categories. Among women with underweight or normal weight prior to pregnancy, those with inadequate weight gain during pregnancy were more likely to deliver a LBW infant. Among the low-income population of Hawaii, women with GWG within the range recommended in the 2009 IOM guidelines had better birthweight outcomes than those with GWG outside the recommended range. Further study is needed to identify optimal GWG goals for women with an obese BMI prior to pregnancy.

Method to predict relative hydriding within a group of zirconium alloys under nuclear irradiation

DOEpatents

Johnson, Jr., A. Burtron; Levy, Ira S.; Trimble, Dennis J.; Lanning, Donald D.; Gerber, Franna S.

1990-01-01

An out-of-reactor method for screening to predict relative in-reactor hydriding behavior of zirconium-bsed materials is disclosed. Samples of zirconium-based materials having different composition and/or fabrication are autoclaved in a relatively concentrated (0.3 to 1.0M) aqueous lithium hydroxide solution at constant temperatures within the water reactor coolant temperature range (280.degree. to 316.degree. C.). Samples tested by this out-of-reactor procedure, when compared on the basis of the ratio of hydrogen weight gain to oxide weight gain, accurately predict the relative rate of hyriding for the same materials when subject to in-reactor (irradiated) corrision.

A fuselage/tank structure study for actively cooled hypersonic cruise vehicles, summary. [aircraft design of aircraft fuel systems

NASA Technical Reports Server (NTRS)

Pirrello, C. J.; Baker, A. H.; Stone, J. E.

1976-01-01

A detailed analytical study was made to investigate the effects of fuselage cross section (circular and elliptical) and the structural arrangement (integral and nonintegral tanks) on aircraft performance. The vehicle was a 200 passenger, liquid hydrogen fueled Mach 6 transport designed to meet a range goal of 9.26 Mn (5000 NM). A variety of trade studies were conducted in the area of configuration arrangement, structural design, and active cooling design in order to maximize the performance of each of three point design aircraft: (1) circular wing-body with nonintegral tanks, (2) circular wing-body with integral tanks and (3) elliptical blended wing-body with integral tanks. Aircraft range and weight were used as the basis for comparison. The resulting design and performance characteristics show that the blended body integral tank aircraft weights the least and has the greatest range capability, however, producibility and maintainability factors favor nonintegral tank concepts.

48 CFR 245.7309-8 - Variations in quantity or weight.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Inventory 245.7309-8 Variations in quantity or weight. When property is sold on a “unit price” basis, the Contractor reserves the right to vary by up to 15 percent the quantity or weight listed in the Invitation and... price shall be adjusted in accordance with the unit price and on the basis of the quantity or weight...

Acid rain at Kennedy Space Center, Florida - Recent observations

NASA Technical Reports Server (NTRS)

Madsen, B. C.

1981-01-01

During the period July, 1977 to September, 1979, rainfall was collected in the vicinity of the Kennedy Space Center and subjected to appropriate chemical analysis for purposes of characterization of general composition and acidity. Results obtained form the basis for future comparisons, should significant alteration of the chemical composition of rain occur during the space shuttle era. Acidity extremes calculated on a monthly basis from event samples collected from five sites within a 200 sq km area varied from pH 5.1 in November, 1977, and April, 1978 to pH 4.3 in July, 1978 and July, 1979. Weighted average pH for the entire period was 4.55. Acidity was due to the presence of sulfuric and nitric acids. The mole ratio of excess SO4(-2):NO3(-) was typically greater than one. Monthly weighted average Cl(-) concentrations ranged from 20-240 micromoles/liter. The Cl(-):Na(+) ratio was slightly lower than that present in sea water.

Characterization of impulse noise and analysis of its effect upon correlation receivers

NASA Technical Reports Server (NTRS)

Houts, R. C.; Moore, J. D.

1971-01-01

A noise model is formulated to describe the impulse noise in many digital systems. A simplified model, which assumes that each noise burst contains a randomly weighted version of the same basic waveform, is used to derive the performance equations for a correlation receiver. The expected number of bit errors per noise burst is expressed as a function of the average signal energy, signal-set correlation coefficient, bit time, noise-weighting-factor variance and probability density function, and a time range function which depends on the crosscorrelation of the signal-set basis functions and the noise waveform. A procedure is established for extending the results for the simplified noise model to the general model. Unlike the performance results for Gaussian noise, it is shown that for impulse noise the error performance is affected by the choice of signal-set basis functions and that Orthogonal signaling is not equivalent to On-Off signaling with the same average energy.

Relationship between Device Size and Body Weight in Dogs with Patent Ductus Arteriosus Undergoing Amplatz Canine Duct Occluder Deployment.

PubMed

Wesselowski, S; Saunders, A B; Gordon, S G

2017-09-01

Deployment of the Amplatz Canine Duct Occluder (ACDO) is the preferred method for minimally invasive occlusion of patent ductus arteriosus (PDA) in dogs, with appropriate device sizing crucial to successful closure. Dogs of any body weight can be affected by PDA. To describe the range of ACDO sizes deployed in dogs of various body weights for improved procedural planning and inventory selection and to investigate for correlation between minimal ductal diameter (MDD) and body weight. A total of 152 dogs undergoing ACDO deployment between 2008 and 2016. Body weight, age, breed, sex, and MDD obtained by angiography (MDD-A), MDD obtained by transesophageal echocardiography (MDD-TEE), and ACDO size deployed were retrospectively evaluated. Correlation between body weight and ACDO size, MDD-A and MDD-TEE was poor, with R-squared values of 0.4, 0.36, and 0.3, respectively. Femoral artery diameter in the smallest population of dogs placed inherent limitations on the use of larger device sizes, with no limitations on the wide range of device sizes required as patient size increased. The most commonly used ACDO devices were size 3 through 6, representing 57% of the devices deployed within the entire study population. Patent ductus arteriosus anatomy varies on an individual basis, with poor correlation between MDD and body weight. Weight-based assumptions about expected ACDO device size for a given patient are not recommended. Copyright © 2017 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals, Inc. on behalf of the American College of Veterinary Internal Medicine.

Ultimate intrinsic-coercivity samarium-cobalt magnet: An Earth-based feasibility study for space-shuttle missions. [containerless melts

NASA Technical Reports Server (NTRS)

Das, D. K.; Kumar, K.; Frost, R. T.; Chang, C. W.

1980-01-01

Techniques for containerless melting and solidification of the samarium-cobalt alloy without excessive oxidation were developed. The rationale for extending these experiments in a weightless environment is also discussed. The effect of oxygen content from 0.15 to 0.63 weight percent and grain size in the range of 2 to 10 micrometers has been examined on arc-plasma-sprayed SmCo5 magnets. Contrary to expectations, the larger grain sizes tended to improve the coercivities. This was attributed to an increase in homogeneity resulting from higher temperature treatments used to produce larger grain size. No significant differences in coercivity were observed on the basis of oxygen content in the range examined. It is expected that more meaningful data on the relationship between oxygen content and coercivity will be seen when the oxygen content can be lowered to less than 0.1 weight percent.

Organochlorine residues in odontocete species from the southeast coast of India.

PubMed

Karuppiah, S; Subramanian, A; Obbard, J P

2005-08-01

Blubber from bottle-nose dolphins, spinner dolphins, humpback dolphin (Tursiops truncatus, Stenella longirostris and Sousa chinensis) were collected from the Bay of Bengal (southeast coast of India) and analyzed for the organochlorine pesticides hexachlorocyclohexane (HCHs), p,p'-dichlorodiphenyl trichloroethane (DDTs), and polychlorinated biphenyls (PCBs). All nine specimens analyzed contained considerable levels of all the three chemical classes where DDT was in the range of 3330-23330 ng/g; HCHs in the range of 95-765 ng/g; and PCBs in the range of 210-1220 ng/g (wet weight basis). The reasons for this and the variations in the isomer pattern of HCHs and DDT and its metabolites in marine mammal tissues are discussed.

40 CFR 761.1 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-07-01

... concentrations shall be determined on a weight-per-weight basis (e.g., milligrams per kilogram), or for liquids, on a weight-per-volume basis (e.g., milligrams per liter) if the density of the liquid is also... µg/100 cm2. (4) PCBs can be found in liquid, non-liquid and multi-phasic (combinations of liquid and...

48 CFR 237.7101 - Solicitation provisions and contract clauses.

Code of Federal Regulations, 2011 CFR

2011-10-01

... and dry cleaning services to be provided on a bulk weight basis. (1) Insert a reasonable per pound..., Instruction to Offerors (Bulk Weight), in solicitations for laundry services to be provided on a bulk weight... laundry services on a bag type basis, insert reasonable per pound prices by bag type. (2) Insert an...

Assessing the value of customized birth weight percentiles.

PubMed

Hutcheon, Jennifer A; Walker, Mark; Platt, Robert W

2011-02-15

Customized birth weight percentiles are weight-for-gestational-age percentiles that account for the influence of maternal characteristics on fetal growth. Although intuitively appealing, the incremental value they provide in the identification of intrauterine growth restriction (IUGR) over conventional birth weight percentiles is controversial. The objective of this study was to assess the value of customized birth weight percentiles in a simulated cohort of 100,000 infants aged 37 weeks whose IUGR status was known. A cohort of infants with a range of healthy birth weights was first simulated on the basis of the distributions of maternal/fetal characteristics observed in births at the Royal Victoria Hospital in Montreal, Canada, between 2000 and 2006. The occurrence of IUGR was re-created by reducing the observed birth weights of a small percentage of these infants. The value of customized percentiles was assessed by calculating true and false positive rates. Customizing birth weight percentiles for maternal characteristics added very little information to the identification of IUGR beyond that obtained from conventional weight-for-gestational-age percentiles (true positive rates of 61.8% and 61.1%, respectively, and false positive rates of 7.9% and 8.5%, respectively). For the process of customization to be worthwhile, maternal characteristics in the customization model were shown through simulation to require an unrealistically strong association with birth weight.

Space shuttle auxiliary propulsion system design study. Phase D report: Oxygen-hydrogen special RCS studies

NASA Technical Reports Server (NTRS)

Baumann, T. L.; Pattern, T. C.; Mckee, H. B.

1972-01-01

Two alternate oxygen-hydrogen auxiliary propulsion system concepts for use with the space shuttle vehicle were evaluated. The two concepts considered were: (1) gaseous oxygen-hydrogen systems with electric or hydraulic motor driven pumps to provide system pressure and (2) liquid oxygen-hydrogen systems which delivered propellants to the engines in a liquid state without the need for pumps. The various means of implementing each of the concepts are compared on the basis of weight, technology requirements, and operational considerations. It was determined that the liquid oxygen-hydrogen system concepts have the potential to produce substantial weight reductions in the space shuttle orbiter total impulse range.

Method to predict relative hydriding within a group of zirconium alloys under nuclear irradiation

DOEpatents

Johnson, A.B. Jr.; Levy, I.S.; Trimble, D.J.; Lanning, D.D.; Gerber, F.S.

1990-04-10

An out-of-reactor method for screening to predict relative in-reactor hydriding behavior of zirconium-based materials is disclosed. Samples of zirconium-based materials having different compositions and/or fabrication methods are autoclaved in a relatively concentrated (0.3 to 1.0M) aqueous lithium hydroxide solution at constant temperatures within the water reactor coolant temperature range (280 to 316 C). Samples tested by this out-of-reactor procedure, when compared on the basis of the ratio of hydrogen weight gain to oxide weight gain, accurately predict the relative rate of hydriding for the same materials when subject to in-reactor (irradiated) corrosion. 1 figure.

Incentive or Habit Learning in Amphibians?

PubMed Central

Muzio, Rubén N.; Pistone Creydt, Virginia; Iurman, Mariana; Rinaldi, Mauro A.; Sirani, Bruno; Papini, Mauricio R.

2011-01-01

Toads (Rhinella arenarum) received training with a novel incentive procedure involving access to solutions of different NaCl concentrations. In Experiment 1, instrumental behavior and weight variation data confirmed that such solutions yield incentive values ranging from appetitive (deionized water, DW, leading to weight gain), to neutral (300 mM slightly hypertonic solution, leading to no net weight gain or loss), and aversive (800 mM highly hypertonic solution leading to weight loss). In Experiment 2, a downshift from DW to a 300 mM solution or an upshift from a 300 mM solution to DW led to a gradual adjustment in instrumental behavior. In Experiment 3, extinction was similar after acquisition with access to only DW or with a random mixture of DW and 300 mM. In Experiment 4, a downshift from DW to 225, 212, or 200 mM solutions led again to gradual adjustments. These findings add to a growing body of comparative evidence suggesting that amphibians adjust to incentive shifts on the basis of habit formation and reorganization. PMID:22087217

Secondary atomization of single coal-water fuel droplets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hassel, G.R.; Scaroni, A.W.

1989-03-01

The evaporative behavior of single, well characterized droplets of a lignite coal-water slurry fuel (CWSF) and a carbon black in water slurry was studied as a function of heating rate and droplet composition. Induced droplet heating rates were varied from 0 to 10{sup 5} K/s. Droplets studied were between 97 and 170 {mu}m in diameter, with compositions ranging from 25 to 60% solids by weight. The effect of a commercially available surfactant additive package on droplet evaporation rate, explosive boiling energy requirements, and agglomerate formation was assessed. Surfactant concentrations were varied from none to 2 and 4% by weight solutionmore » (1.7 and 3.6% by weight of active species on a dry coal basis). The experimental system incorporated an electrodynamic balance to hold single, free droplets, a counterpropagating pulsed laser heating arrangement, and both video and high speed cinematographic recording systems. Data were obtained for ambient droplet evaporation by monitoring the temporal size, weight, and solids concentration changes. 49 refs., 31 figs.« less

A Soil Service Index: a method for quantifying the value, vulnerability, and status of soil resources

NASA Astrophysics Data System (ADS)

Harden, J. W.; Loisel, J.; Hugelius, G.; Sulman, B. N.; Bond-Lamberty, B. P.; Abramoff, R. Z.; Malhotra, A.; Gill, A. L.

2017-12-01

Soils support ecological and human systems by providing a physical and biogeochemical basis for plant growth, ecological functions, water quality, and water storage, and by providing services and functions needed for economic development, human well-being, and conservation of natural resources. Quantitative evaluation of soil services, however, is inconsistent and poorly communicated, in part because we lack a scientific, unified basis for evaluating soils and their potential for serving our needs. We introduce an index of soil service (SSI) in which multiple services are numerically or quantitatively assessed, normalized to a unit-less scale for purposes of intercomparability, and evaluated for a given site or region. Services include organic matter and/or organic carbon storage; plant productivity; CO2 or GHG exchange with the atmosphere; water storage capacity; and nutrient storage and/or availability. The status of SSI can be evaluated by individual services or by a composite index that combines multiple services. The status can be monitored over time; and key services that are more highly valued for a given soil can be weighted accordingly in comparison to other services. As a first step, existing data for each service are captured from a literature and data review in order to establish the full range of values. A site value establishes the ranking relative to the full range. Key services are weighted according to local values. A final index is the sum of the normalized, weighted products. Metrics can be updated and adapted as new data or services are discovered or recognized. Metrics can be used to compare among sites, regions, or time periods.

Performance and Sizing Tool for Quadrotor Biplane Tailsitter UAS

NASA Astrophysics Data System (ADS)

Strom, Eric

The Quadrotor-Biplane-Tailsitter (QBT) configuration is the basis for a mechanically simplistic rotorcraft capable of both long-range, high-speed cruise as well as hovering flight. This work presents the development and validation of a set of preliminary design tools built specifically for this aircraft to enable its further development, including: a QBT weight model, preliminary sizing framework, and vehicle analysis tools. The preliminary sizing tool presented here shows the advantage afforded by QBT designs in missions with aggressive cruise requirements, such as offshore wind turbine inspections, wherein transition from a quadcopter configuration to a QBT allows for a 5:1 trade of battery weight for wing weight. A 3D, unsteady panel method utilizing a nonlinear implementation of the Kutta-Joukowsky condition is also presented as a means of computing aerodynamic interference effects and, through the implementation of rotor, body, and wing geometry generators, is prepared for coupling with a comprehensive rotor analysis package.

An anatomic basis for volumetric evaluation of the neck.

PubMed

Raveendran, Sherine S; Anthony, D J; Ion, Lucian

2012-08-01

A better understanding of volume distribution between the superficial (subcutaneous) and deep (subplatysmal) planes of the neck may be useful when deciding on the best course of management for patients presenting for cervical contouring. The authors investigate the normal distribution of fat in the superficial and deep planes of the neck in a cadaver model, to determine the proportion of the submandibular gland that contributes to submental fullness. Fat in the superficial and deep neck planes of 29 adult cadavers was dissected and weighed. The submandibular glands were also dissected and the cervical portion of each gland was shaved off, weighed, and compared to the weight of the whole gland. The mean weight of superficial fat collected from the specimens was 15.0 g in males (n = 14; range, 2.2-35.7 g) and 14.3 g in females (n = 15; range, 1.6-37.3 g); the mean weight of subplatysmal fat was 5.5 g in males (range, 1.3-15.2 g) and 3.7 g in females (range, 0.6-15.1 g). Mean weight was not statistically significantly different between the sexes, nor between the 2 racial/ethnic groups (Caucasian, n = 14; Southeast Asian, n = 15). Approximately 40% of the submandibular gland was found to lie inferior to the lower border of the mandible in the specimens examined. The authors found no anatomical evidence of submandibular gland ptosis, even in the oldest specimens. The study provides a comprehensive analysis of the distribution of adipose tissue in the superficial and deep planes of the neck, as well as the contribution of the submandibular glands to submental volume. This objective evaluation of neck volume may help guide clinicians in the surgical planning process and provide a foundation for designing new cervicofacial rejuvenation techniques.

Acceptable range of speech level in noisy sound fields for young adults and elderly persons.

PubMed

Sato, Hayato; Morimoto, Masayuki; Ota, Ryo

2011-09-01

The acceptable range of speech level as a function of background noise level was investigated on the basis of word intelligibility scores and listening difficulty ratings. In the present study, the acceptable range is defined as the range that maximizes word intelligibility scores and simultaneously does not cause a significant increase in listening difficulty ratings from the minimum ratings. Listening tests with young adult and elderly listeners demonstrated the following. (1) The acceptable range of speech level for elderly listeners overlapped that for young listeners. (2) The lower limit of the acceptable speech level for both young and elderly listeners was 65 dB (A-weighted) for noise levels of 40 and 45 dB (A-weighted), a level with a speech-to-noise ratio of +15 dB for noise levels of 50 and 55 dB, and a level with a speech-to-noise ratio of +10 dB for noise levels from 60 to 70 dB. (3) The upper limit of the acceptable speech level for both young and elderly listeners was 80 dB for noise levels from 40 to 55 dB and 85 dB or above for noise levels from 55 to 70 dB. © 2011 Acoustical Society of America

The Moisture Content and Specific Gravity of the Bark and Wood of Northern Pulpwood Species

Treesearch

John R. Erickson

1972-01-01

Much information is available on the specific gravity of wood on a dry weight over green volume and dry weight over dry volume basis. This paper presents the conventional specific gravity on a green weight over green volume basis. The relative specific gravities of bark and wood chips may be helpful in finding way to remove bark particles from chips.

Weight gain and nutritional efficacy in anorexia nervosa.

PubMed

Dempsey, D T; Crosby, L O; Pertschuk, M J; Feurer, I D; Buzby, G P; Mullen, J L

1984-02-01

To evaluate the usefulness of interval weight change in assessing nutritional support efficacy, we studied four anorexia nervosa patients (52% ideal body weight) requiring long-term total parenteral nutrition (TPN) for 63 +/- 18 days. Fluid and electrolyte deficits were corrected before the initiation of nutritional support. Resting energy expenditure was measured before the initiation of TPN and weekly thereafter, using indirect calorimetry. Daily caloric expenditure was estimated at 1.1 X resting energy expenditure, based on previous studies of continuous heart rate monitoring in this patient population. Daily excess calories were calculated as caloric intake minus caloric expenditure. Each patient was weighed daily and linear regression analysis (excess calories versus weight change) was performed for individual patients and the group over intervals of varying length. There was no individual or group correlation between excess calories and weight gain on a daily or weekly interval basis. Cumulative weight changes over the long-term course of TPN correlated significantly with cumulative excess calories for each patient and the whole group (r = +0.82, p less than 0.01). The excess calories required to gain a kilogram body weight ranged from 5569 to 15619 kcal/kg with a mean of 9768. Cumulative long-term weight changes during nutritional repletion in anorexia nervosa are meaningful indicators of caloric balance, but short interval weight changes (daily, weekly) are not. The caloric cost of weight gain is variable in this population.

Advanced Subsonic Airplane Design and Economic Studies

NASA Technical Reports Server (NTRS)

Liebeck, Robert H.; Andrastek, Donald A.; Chau, Johnny; Girvin, Raquel; Lyon, Roger; Rawdon, Blaine K.; Scott, Paul W.; Wright, Robert A.

1995-01-01

A study was made to examine the effect of advanced technology engines on the performance of subsonic airplanes and provide a vision of the potential which these advanced engines offered. The year 2005 was selected as the entry-into-service (EIS) date for engine/airframe combination. A set of four airplane classes (passenger and design range combinations) that were envisioned to span the needs for the 2005 EIS period were defined. The airframes for all classes were designed and sized using 2005 EIS advanced technology. Two airplanes were designed and sized for each class: one using current technology (1995) engines to provide a baseline, and one using advanced technology (2005) engines. The resulting engine/airframe combinations were compared and evaluated on the basis on sensitivity to basic engine performance parameters (e.g. SFC and engine weight) as well as DOC+I. The advanced technology engines provided significant reductions in fuel burn, weight, and wing area. Average values were as follows: reduction in fuel burn = 18%, reduction in wing area = 7%, and reduction in TOGW = 9%. Average DOC+I reduction was 3.5% using the pricing model based on payload-range index and 5% using the pricing model based on airframe weight. Noise and emissions were not considered.

Nutritive value evaluated on rats of new cultivars of common beans (Phaseolus vulgaris) released in Chile.

PubMed

Yañez, E; Zacarias, I; Aguayo, M; Vasquez, M; Guzman, E

1995-06-01

Five new cultivars of common beans (Phaseolus vulgaris) recently released were analyzed for their proximate chemical composition and protein biological quality. The crude protein content in these cultivars ranged from 21.9 percent in cultivar Arroz 3 to 26.9 percent in cultivar Tórtola Diana (dry matter basis). Rats fed cultivar Tórtola INIA gained more weight, had a higher protein intake and registered higher PER and NPR than Tórtola corriente. On the other hand, rats consuming cultivars Arroz 3 and Fleetwood had lower weight gain, lower protein intake and lower PER and NPR than cultivar Coscorrón corriente. However, all these cultivars have a relatively good protein value as compared to other plant protein sources.

Open and Closed Loop Stability of Hingeless Rotor Helicopter Air and Ground Resonance

NASA Technical Reports Server (NTRS)

Young, M. I.; Bailey, D. J.; Hirschbein, M. S.

1974-01-01

The air and ground resonance instabilities of hingeless rotor helicopters are examined on a relatively broad parametric basis including the effects of blade tuning, virtual hinge locations, and blade hysteresis damping, as well as size and scale effects in the gross weight range from 5,000 to 48,000 pounds. A special case of a 72,000 pound helicopter air resonance instability is also included. The study shows that nominal to moderate and readily achieved levels of blade inertial hysteresis damping in conjunction with a variety of tuning and/or feedback conditions are highly effective in dealing with these instabilities. Tip weights and reductions in pre-coning angles are also shown to be effective means for improving the air resonance instability.

Fuel conservation merits of advanced turboprop transport aircraft

NASA Technical Reports Server (NTRS)

Revell, J. D.; Tullis, R. H.

1977-01-01

The advantages of a propfan powered aircraft for the commercial air transportation system were assessed by the comparison with an equivalent turbofan transport. Comparisons were accomplished on the basis of fuel utilization and operating costs, as well as aircraft weight and size. Advantages of the propfan aircraft, concerning fuel utilization and operating costs, were accomplished by considering: (1) incorporation of propfan performance and acoustic data; (2) revised mission profiles (longer design range and reduction in; and cruise speed) (3) utilization of alternate and advanced technology engines.

Assessing the Influence of Traffic-related Air Pollution on Risk of Term Low Birth Weight on the Basis of Land-Use-based Regression Models and Measures of Air Toxics

PubMed Central

Ghosh, Jo Kay C.; Wilhelm, Michelle; Su, Jason; Goldberg, Daniel; Cockburn, Myles; Jerrett, Michael; Ritz, Beate

2012-01-01

Few studies have examined associations of birth outcomes with toxic air pollutants (air toxics) in traffic exhaust. This study included 8,181 term low birth weight (LBW) children and 370,922 term normal-weight children born between January 1, 1995, and December 31, 2006, to women residing within 5 miles (8 km) of an air toxics monitoring station in Los Angeles County, California. Additionally, land-use-based regression (LUR)-modeled estimates of levels of nitric oxide, nitrogen dioxide, and nitrogen oxides were used to assess the influence of small-area variations in traffic pollution. The authors examined associations with term LBW (≥37 weeks’ completed gestation and birth weight <2,500 g) using logistic regression adjusted for maternal age, race/ethnicity, education, parity, infant gestational age, and gestational age squared. Odds of term LBW increased 2%–5% (95% confidence intervals ranged from 1.00 to 1.09) per interquartile-range increase in LUR-modeled estimates and monitoring-based air toxics exposure estimates in the entire pregnancy, the third trimester, and the last month of pregnancy. Models stratified by monitoring station (to investigate air toxics associations based solely on temporal variations) resulted in 2%–5% increased odds per interquartile-range increase in third-trimester benzene, toluene, ethyl benzene, and xylene exposures, with some confidence intervals containing the null value. This analysis highlights the importance of both spatial and temporal contributions to air pollution in epidemiologic birth outcome studies. PMID:22586068

Assessing the influence of traffic-related air pollution on risk of term low birth weight on the basis of land-use-based regression models and measures of air toxics.

PubMed

Ghosh, Jo Kay C; Wilhelm, Michelle; Su, Jason; Goldberg, Daniel; Cockburn, Myles; Jerrett, Michael; Ritz, Beate

2012-06-15

Few studies have examined associations of birth outcomes with toxic air pollutants (air toxics) in traffic exhaust. This study included 8,181 term low birth weight (LBW) children and 370,922 term normal-weight children born between January 1, 1995, and December 31, 2006, to women residing within 5 miles (8 km) of an air toxics monitoring station in Los Angeles County, California. Additionally, land-use-based regression (LUR)-modeled estimates of levels of nitric oxide, nitrogen dioxide, and nitrogen oxides were used to assess the influence of small-area variations in traffic pollution. The authors examined associations with term LBW (≥37 weeks' completed gestation and birth weight <2,500 g) using logistic regression adjusted for maternal age, race/ethnicity, education, parity, infant gestational age, and gestational age squared. Odds of term LBW increased 2%-5% (95% confidence intervals ranged from 1.00 to 1.09) per interquartile-range increase in LUR-modeled estimates and monitoring-based air toxics exposure estimates in the entire pregnancy, the third trimester, and the last month of pregnancy. Models stratified by monitoring station (to investigate air toxics associations based solely on temporal variations) resulted in 2%-5% increased odds per interquartile-range increase in third-trimester benzene, toluene, ethyl benzene, and xylene exposures, with some confidence intervals containing the null value. This analysis highlights the importance of both spatial and temporal contributions to air pollution in epidemiologic birth outcome studies.

Lowest neonatal serum sodium predicts sodium intake in low birth weight children.

PubMed

Shirazki, Adi; Weintraub, Zalman; Reich, Dan; Gershon, Edith; Leshem, Micah

2007-04-01

Forty-one children aged 10.5 +/- 0.2 years (range, 8.0-15.0 yr), born with low birth weight of 1,218.2 +/- 36.6 g (range, 765-1,580 g) were selected from hospital archives on the basis of whether they had received neonatal diuretic treatment or as healthy matched controls. The children were tested for salt appetite and sweet preference, including rating of preferred concentration of salt in tomato soup (and sugar in tea), ratings of oral spray (NaCl and sucrose solutions), intake of salt or sweet snack items, and a food-seasoning, liking, and dietary questionnaire. Results showed that sodium appetite was not related to neonatal diuretic treatment, birth weight, or gestational age. However, there was a robust inverse correlation (r = -0.445, P < 0.005) between reported dietary sodium intake and the neonatal lowest serum sodium level (NLS) recorded for each child as an index of sodium loss. The relationship of NLS and dietary sodium intake was found in both boys and girls and in both Arab and Jewish children, despite marked ethnic differences in dietary sources of sodium. Hence, low NLS predicts increased intake of dietary sodium in low birth weight children some 8-15 yr later. Taken together with other recent evidence, it is now clear that perinatal sodium loss, from a variety of causes, is a consistent and significant contributor to long-term sodium intake.

Weight Status and Weight Perception in Relation to Mental Distress and Psychosocial Protective Factors Among Adolescents.

PubMed

Christoph, Mary J; Jarrett, Elizabeth S; Gower, Amy L; Borowsky, Iris W

To measure how weight status and weight perception relate to mental distress and psychosocial protective factors in adolescents. Adolescents in 8th, 9th, and 11th grade participating in the 2013 Minnesota Student Survey (N = 122,180) were classified on the basis of weight perception (overweight or not overweight) and weight status (not overweight, overweight, obese). Bivariate tests were used to assess the relationship of weight status and weight perception with internal mental distress, and generalized linear models were used to measure the association between weight status and weight perception with psychosocial protective factors including parent, school, and friend connectedness, social competency, and positive identity. Logistic regressions measured the relationship between psychosocial protective factors and internal mental distress. Prevalence of internal mental distress ranged from 14.5% for overweight boys who perceived themselves as not overweight to 55.0% for girls who were not overweight but self-perceived as overweight. Across all weight-status categories, adolescents who perceived themselves as overweight, compared to those who did not, had higher internal mental distress and lower mean levels of psychosocial protective factors. All psychosocial protective factors were related to lower odds of internal mental distress, with significant small differences by weight status and weight perception. Weight status and weight perception affected both mental distress and psychosocial protective factors. Those who perceived themselves as overweight, regardless of weight status, had the highest prevalence of mental distress and the lowest levels of psychosocial protective factors. Health care providers should consider screening for weight perception to provide a tailored approach to adolescent care. Copyright © 2017 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

Abundances of polycyclic aromatic hydrocarbons (PAHs) in 14 chinese and american coals and their relation to coal rank and weathering

USGS Publications Warehouse

Wang, R.; Liu, Gaisheng; Zhang, Jiahua; Chou, C.-L.; Liu, J.

2010-01-01

The abundances of 16 polycyclic aromatic hydrocarbons (PAHs) on the priority list of the United States Environmental Protection Agency (U.S. EPA) have been determined in 14 Chinese and American coals. The ranks of the samples range from lignite, bituminous coal, anthracite, to natural coke. Soxhlet extraction was conducted on each coal for 48 h. The extract was analyzed on a gas chromatograph-mass spectrometer (GC-MS). The results show that the total PAH content ranged from 0.31 to 57.6 ??g/g of coal (on a dry basis). It varied with coal rank and is highest in the maturity range of bituminous coal rank. High-molecular-weight (HMW) PAHs are predominant in low-rank coals, but low-molecular-weight (LMW) PAHs are predominant in high-rank coals. The low-sulfur coals have a higher PAH content than high-sulfur coals. It may be explained by an increasing connection between disulfide bonds and PAHs in high-sulfur coal. In addition, it leads us to conclude that the PAH content of coals may be related to the depositional environment. ?? 2010 American Chemical Society.

Sorption of vapors of some organic liquids on soil humic acid and its relation to partitioning of organic compounds in soil organic matter

USGS Publications Warehouse

Chlou, G.T.; Kile, D.E.; Malcolm, R.L.

1988-01-01

Vapor sorption of water, ethanol, benzene, hexane, carbon tetrachloride, 1,1,1-trichloroethane, trichloroethylene, tetrachloroethylene, and 1,2-dibromoethane on (Sanhedron) soil humic acid has been determined at room temperature. Isotherms for all organic liquids are highly linear over a wide range of relative pressure (P/P??), characteristic of the partitioning (dissolution) of the organic compounds in soil humic acid. Polar liquids exhibit markedly greater sorption capacities on soil humic acid than relatively nonpolar liquids, in keeping with the polar nature of the soil humic acid as a partition medium. The limiting sorption (partition) capacities of relatively non-polar liquids are remarkably similar when expressed in terms of volumes per unit weight of soil humic acid. The soil humic acid is found to be about half as effective as soil organic matter in sorption of relatively nonpolar organic compounds. The nearly constant limiting sorption capacity for nonpolar organic liquids with soil humic acid on a volume-to-weight basis and its efficiency in sorption relative to soil organic matter provide a basis for predicting the approximate sorption (partition) coefficients of similar compounds in uptake by soil in aqueous systems.

Size and shape of soil humic acids estimated by viscosity and molecular weight.

PubMed

Kawahigashi, Masayuki; Sumida, Hiroaki; Yamamoto, Kazuhiko

2005-04-15

Ultrafiltration fractions of three soil humic acids were characterized by viscometry and high performance size-exclusion chromatography (HPSEC) in order to estimate shapes and hydrodynamic sizes. Intrinsic viscosities under given solute/solvent/temperature conditions were obtained by extrapolating the concentration dependence of reduced viscosities to zero concentration. Molecular mass (weight average molecular weight (M (w)) and number average molecular weight (M (n))) and hydrodynamic radius (R(H)) were determined by HPSEC using pullulan as calibrant. Values of M (w) and M (n) ranged from 15 to 118 x 10(3) and from 9 to 50 x 10(3) (g mol(-1)), respectively. Polydispersity, as indicated by M (w)/M (n), increased with increasing filter size from 1.5 to 2.4. The hydrodynamic radii (R(H)) ranged between 2.2 and 6.4 nm. For each humic acid, M (w) and [eta] were related. Mark-Houwink coefficients calculated on the basis of the M (w)-[eta] relationships suggested restricted flexible chains for two of the humic acids and a branched structure for the third humic acid. Those structures probably behave as hydrated sphere colloids in a good solvent. Hydrodynamic radii of fractions calculated from [eta] using Einstein's equation, which is applicable to hydrated sphere colloids, ranged from 2.2 to 7.1 nm. These dimensions are fit to the size of nanospaces on and between clay minerals and micropores in soil particle aggregates. On the other hand, the good agreement of R(H) values obtained by applying Einstein's equation with those directly determined by HPSEC suggests that pullulan is a suitable calibrant for estimation of molecular mass and size of humic acids by HPSEC.

Continuous process for conversion of coal

DOEpatents

Knudson, Curtis L.; Willson, Warrack G.; Baker, Gene G.; Sondreal, Everett A.; Farnum, Sylvia A.

1982-01-01

An improved process for converting coal to liquid and gaseous products wherein the liquid products predominate and wherein reactor, tubing, and valve plugging due to carbonate salt formation is reduced by reacting crushed low-rank coal containing about 12 to 30% by weight of water in a solvent at a temperature in the range of about 455.degree. to 500.degree. C., under about 2000 to 5000 psi pressure of a H.sub.2 /CO mixture for a liquid residence time of about 20 to 60 minutes. The solvent is a fraction of liquid product defined on a weight basis as being made up of about 55% of which distills at less than 250.degree. C./lmm, about 20% of which is soluble in THF, and about 25% of which is carbon polymer and indigenous inorganic matter. The solvent is further defined as containing at least about 5 weight % of partially hydrogenated aromatics and/or fully hydrogenated aromatics and little or no alkylated aromatics or higher alkanes.

Fuel conservation merits of advanced turboprop transport aircraft. Final report, January--August 1977

DOE Office of Scientific and Technical Information (OSTI.GOV)

Revell, J.D.; Tullis, R.H.

1977-08-01

The advantages of a propfan powered aircraft for the commercial air transportation system were assessed by the comparison with an equivalent turbofan transport. Comparisons were accomplished on the basis of fuel utilization and operating costs, as well as aircraft weight and size. Advantages of the propfan aircraft, concerning fuel utilization and operating costs, were accomplished by considering: (1) incorporation of propfan performance and acoustic data; (2) revised mission profiles (longer design range and reduction in; and cruise speed) (3) utilization of alternate and advanced technology engines.

40 CFR Table 8 to Subpart Dddd of... - Continuous Compliance With the Work Practice Requirements

Code of Federal Regulations, 2012 CFR

2012-07-01

... with an inlet moisture content less than or equal to 30 percent (by weight, dry basis) AND operate with... inlet furnish moisture content at less than or equal to 30 percent (by weight, dry basis) AND... records of the inlet temperature of furnish moisture content and inlet dryer temperature. (2) Hardwood...

40 CFR Table 8 to Subpart Dddd of... - Continuous Compliance With the Work Practice Requirements

Code of Federal Regulations, 2014 CFR

2014-07-01

... with an inlet moisture content less than or equal to 30 percent (by weight, dry basis) AND operate with... inlet furnish moisture content at less than or equal to 30 percent (by weight, dry basis) AND... records of the inlet temperature of furnish moisture content and inlet dryer temperature. (2) Hardwood...

40 CFR Table 8 to Subpart Dddd of... - Continuous Compliance With the Work Practice Requirements

Code of Federal Regulations, 2013 CFR

2013-07-01

... with an inlet moisture content less than or equal to 30 percent (by weight, dry basis) AND operate with... inlet furnish moisture content at less than or equal to 30 percent (by weight, dry basis) AND... records of the inlet temperature of furnish moisture content and inlet dryer temperature. (2) Hardwood...

Estimating aspen volume and weight for individual trees, diameter classes, or entire stands.

Treesearch

Bryce E. Schlaegel

1975-01-01

Presents allometric volume and weight equations for Minnesota quaking aspen. Volume, green weight, and dry weight estimates can be made for wood, bark, and limbs on the basis of individual trees, diameter classes, or entire stands.

Generation of coherent states of photon-added type via pathway of eigenfunctions

NASA Astrophysics Data System (ADS)

Górska, K.; Penson, K. A.; Duchamp, G. H. E.

2010-09-01

We obtain and investigate the regular eigenfunctions of simple differential operators xr dr + 1/dxr + 1, r = 1, 2, ..., with the eigenvalues equal to 1. With the help of these eigenfunctions, we construct a non-unitary analogue of a boson displacement operator which will be acting on the vacuum. In this way, we generate collective quantum states of the Fock space which are normalized and equipped with the resolution of unity with the positive weight functions that we obtain explicitly. These states are thus coherent states in the sense of Klauder. They span the truncated Fock space without first r lowest-lying basis states: |0rang, |1rang, ..., |r - 1rang. These states are squeezed, sub-Poissonian in nature and reminiscent of photon-added states in Agarwal and Tara (1991 Phys. Rev. A 43 492).

The relationship of newborn adiposity to fetal growth outcome based on birth weight or the modified neonatal growth assessment score

PubMed Central

Lee, W; Riggs, T; Koo, W; Deter, RL; Yeo, L; Romero, R

2013-01-01

Objectives (1) Develop reference ranges of neonatal adiposity using air displacement plethysmography. (2) Use new reference ranges for neonatal adiposity to compare two different methods of evaluating neonatal nutritional status. Methods Three hundred and twenty-four normal neonates (35–41 weeks post-menstrual age) had body fat (%BF) and total fat mass (FM, g) measured using air displacement plethysmography shortly after delivery. Results were stratified for 92 of these neonates with corresponding fetal biometry using two methods for classifying nutritional status: (1) population-based weight percentiles; and (2) a modified neonatal growth assessment score (m3NGAS51). Results At the 50th percentile, &BF varied from 7.7% (35 weeks) to 11.8% (41 weeks), while the corresponding 50th percentiles for total FM were 186–436g. Among the subset of 92 neonates, no significant differences in adiposity were found between small for gestational age (SGA), appropriate for gestational age (AGA), and large for gestational age (LGA) groups using population-based weight standards. Classification of the same neonates using m3NGAS51 showed significant differences in mean %BF between corresponding groups. Conclusions Population-based weight criteria for neonatal nutritional status can lead to misclassification on the basis of adiposity. A neonatal growth assessment score, that considers the growth potential of several anatomic parameters, appears to more effectively classify under-and over-nourished newborns. PMID:22494346

Effect of varying molecular weight of dextran on acrylic-derivatized dextran and concanavalin A glucose-responsive materials for closed-loop insulin delivery.

PubMed

Sahota, Tarsem; Sawicka, Kirsty; Taylor, Joan; Tanna, Sangeeta

2011-03-01

Dextran methacrylate (dex-MA) and concanavalin A (con A)-methacrylamide were photopolymerized to produce covalently cross-linked glucose-sensitive gels for the basis of an implantable closed-loop insulin delivery device. The viscoelastic properties of these polymerized gels were tested rheologically in the non-destructive oscillatory mode within the linear viscoelastic range at glucose concentrations between 0 and 5% (w/w). For each cross-linked gel, as the glucose concentration was raised, a decrease in storage modulus, loss modulus and complex viscosity (compared at 1 Hz) was observed, indicating that these materials were glucose responsive. The higher molecular weight acrylic-derivatized dextrans [degree of substitution (DS) 3 and 8%] produced higher complex viscosities across the glucose concentration range. These studies coupled with in vitro diffusion experiments show that dex-MA of 70 kDa and DS (3%) was the optimum mass average molar mass to produce gels that show reduced component leach, glucose responsiveness, and insulin transport useful as part of a self-regulating insulin delivery device.

Optimization of high molecular weight pullulan production by Aureobasidium pullulans in batch fermentations.

PubMed

Gibson, Larry H; Coughlin, Robert W

2002-01-01

Of five strains of Aureobasidium pullulans studied, NRRL Y-2311-1 yielded the highest titer (26.2 g/L) of pullulan and formed the lowest amount of melanin-like pigment. Sucrose was superior to glucose as the carbon and energy source on the basis of yield and titer of pullulan produced. Pullulan titer was higher (26.2 vs 5.1 g/L), biomass concentration was lower (6.9 vs 12.7 g/L), and DO was lower (0 vs 60% of saturation) when the fermenter was agitated by a marine propeller compared to Rushton impellers. Pullulan produced by strain NRRL Y-2311-1 ranged in weight-average molar mass (M(w)) from 486 KDa and number-average molar mass (M(n)) from 220 Da on day 1 of growth to 390 KDa and 690 Da on day 6; M(w) declined by about 35% from day 1 to day 3, the day of maximum pullulan titer. For the other strains, the ranges of molar mass on the day of maximum pullulan titer were 338-614 KDa (M(w)) and 100-6820 Da (M(n)).

Charts for the minimum-weight design of 24s-t aluminum-alloy flat compression panels with longitudinal z-section stiffeners

NASA Technical Reports Server (NTRS)

Schuette, Evan H

1945-01-01

Design charts are developed for 24s-t aluminum-alloy flat compression panels with longitudinal z-section stiffeners. These charts make possible the design of the lightest panels of this type for a wide range of design requirements. Examples of the use of the charts are given and it is pointed out on the basis of these examples that, over a wide range of design conditions, the maintenance of buckle-free surfaces does not conflict with the achievement of high structural efficiency. The achievement of the maximum possible structural efficiency with 24s-t aluminum-alloy panels, however, requires closer stiffener spacings than those now in common use.

Sensitivity analysis of physiological factors in space habitat design

NASA Technical Reports Server (NTRS)

Billingham, J.

1982-01-01

The costs incurred by design conservatism in space habitat design are discussed from a structural standpoint, and areas of physiological research into less than earth-normal conditions that offer the greatest potential decrease in habitat construction and operating costs are studied. The established range of human tolerance limits is defined for those physiological conditions which directly affect habitat structural design. These entire ranges or portions thereof are set as habitat design constraints as a function of habitat population and degree of ecological closure. Calculations are performed to determine the structural weight and cost associated with each discrete population size and its selected environmental conditions, on the basis of habitable volume equivalence for four basic habitat configurations: sphere, cylinder with hemispherical ends, torus, and crystal palace.

Supersonic through-flow fan engine and aircraft mission performance

NASA Technical Reports Server (NTRS)

Franciscus, Leo C.; Maldonado, Jaime J.

1989-01-01

A study was made to evaluate potential improvement to a commercial supersonic transport by powering it with supersonic through-flow fan turbofan engines. A Mach 3.2 mission was considered. The three supersonic fan engines considered were designed to operate at bypass ratios of 0.25, 0.5, and 0.75 at supersonic cruise. For comparison a turbine bypass turbojet was included in the study. The engines were evaluated on the basis of aircraft takeoff gross weight with a payload of 250 passengers for a fixed range of 5000 N.MI. The installed specific fuel consumption of the supersonic fan engines was 7 to 8 percent lower than that of the turbine bypass engine. The aircraft powered by the supersonic fan engines had takeoff gross weights 9 to 13 percent lower than aircraft powered by turbine bypass engines.

40 CFR Table 6 to Subpart Dddd of... - Initial Compliance Demonstrations for Work Practice Requirements

Code of Federal Regulations, 2010 CFR

2010-07-01

... moisture content less than or equal to 30 percent (by weight, dry basis) AND operate with an inlet dryer... dryer” AND you have a record of the inlet moisture content and inlet dryer temperature (as required in... an inlet moisture content of less than or equal to 25 percent (by weight, dry basis) You meet the...

40 CFR Table 6 to Subpart Dddd of... - Initial Compliance Demonstrations for Work Practice Requirements

Code of Federal Regulations, 2011 CFR

2011-07-01

... moisture content less than or equal to 30 percent (by weight, dry basis) AND operate with an inlet dryer... dryer” AND you have a record of the inlet moisture content and inlet dryer temperature (as required in... an inlet moisture content of less than or equal to 25 percent (by weight, dry basis) You meet the...

Computer program to perform cost and weight analysis of transport aircraft. Volume 1: Summary

NASA Technical Reports Server (NTRS)

1973-01-01

A digital computer program for evaluating the weight and costs of advanced transport designs was developed. The resultant program, intended for use at the preliminary design level, incorporates both batch mode and interactive graphics run capability. The basis of the weight and cost estimation method developed is a unique way of predicting the physical design of each detail part of a vehicle structure at a time when only configuration concept drawings are available. In addition, the technique relies on methods to predict the precise manufacturing processes and the associated material required to produce each detail part. Weight data are generated in four areas of the program. Overall vehicle system weights are derived on a statistical basis as part of the vehicle sizing process. Theoretical weights, actual weights, and the weight of the raw material to be purchased are derived as part of the structural synthesis and part definition processes based on the computed part geometry.

46 CFR 189.35-90 - Weight handling gear manufactured prior to March 1, 1968.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) OCEANOGRAPHIC RESEARCH VESSELS INSPECTION AND CERTIFICATION Weight Handling Gear § 189.35-90 Weight handling..., will be accepted on the basis of appropriate tests and examinations should plans or other technical...

Oxygen consumption during pouch development of the macropod marsupial Setonix brachyurus

PubMed Central

Shield, John

1966-01-01

1. Measurements of O2 consumption at 9 or 10 temperatures in the 20-40° C ambient temperature range were made on joeys with ages selected to cover the 180-day period of pouch occupancy. 2. The rate of O2 consumption of joeys younger than 100 days increased directly with ambient temperature. 3. After 100 days of age the O2 consumption rate at low temperatures rose and at about 140 days of age a constant rate was maintained over the full ambient temperature range. 4. Heat transfer from joey to mother commenced after 100 days of age. 5. At 150-180 days of age the rate of O2 consumption at 20° C was approximately 12 times greater than at ages less than 100 days. A thermal neutral zone was established in the range 32-36° C by joeys older than 150 days. 6. At the usual pouch temperature of 36·5° C, O2 consumption per unit wet body weight rose from 12 ml./kg.min at birth to 17 ml./kg.min at the end of pouch life. On a unit dry body weight basis it fell from 120 to 56 ml./kg.min. This decline parallels the decrease in growth rate. PMID:5972171

40 CFR Table 6 to Subpart Dddd of... - Initial Compliance Demonstrations for Work Practice Requirements

Code of Federal Regulations, 2013 CFR

2013-07-01

... furnish with an inlet moisture content less than or equal to 30 percent (by weight, dry basis) AND operate... criteria of a “dry rotary dryer” AND you have a record of the inlet moisture content and inlet dryer... an inlet moisture content of less than or equal to 25 percent (by weight, dry basis) You meet the...

40 CFR Table 6 to Subpart Dddd of... - Initial Compliance Demonstrations for Work Practice Requirements

Code of Federal Regulations, 2014 CFR

2014-07-01

... furnish with an inlet moisture content less than or equal to 30 percent (by weight, dry basis) AND operate... criteria of a “dry rotary dryer” AND you have a record of the inlet moisture content and inlet dryer... an inlet moisture content of less than or equal to 25 percent (by weight, dry basis) You meet the...

40 CFR Table 6 to Subpart Dddd of... - Initial Compliance Demonstrations for Work Practice Requirements

Code of Federal Regulations, 2012 CFR

2012-07-01

... furnish with an inlet moisture content less than or equal to 30 percent (by weight, dry basis) AND operate... criteria of a “dry rotary dryer” AND you have a record of the inlet moisture content and inlet dryer... an inlet moisture content of less than or equal to 25 percent (by weight, dry basis) You meet the...

7 CFR 981.61 - Redetermination of kernel weight.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Redetermination of kernel weight. 981.61 Section 981... GROWN IN CALIFORNIA Order Regulating Handling Volume Regulation § 981.61 Redetermination of kernel weight. The Board, on the basis of reports by handlers, shall redetermine the kernel weight of almonds...

Measuring the energy expenditure and water flux in free-ranging alpacas (Lama pacos) in the peruvian andes using the doubly labelled water technique.

PubMed

Riek, Alexander; Van Der Sluijs, Leendert; Gerken, Martina

2007-12-01

Energy expenditure and water flux were measured in free-ranging alpacas Lama pacos, a South American camelid, on natural pastures of the Peruvian Andes (altitude: 4,400 m above sea level). Water influx rate (WIR) was estimated in 16 males (age 2 years, weight 48.5+/-8.6 kg) labelled with 2H. In addition, the field metabolic rate (FMR) was measured in four of these animals labelled with both an oxygen (18O) and a hydrogen (2H) isotope. The WIR averaged 3.62 L H2O/day and the mean total body water 33.1 kg, equal to 68.2% of body weight (BW). The FMR of the four doubly labelled animals was 14.05 MJ/day. New allometric equations were calculated describing the relationships between WIR or FMR and BW, respectively, including published data on ruminants and the present alpaca results. The regression equation indicates that daily WIR scales to a similar metabolic size (kilograms of BW(0.94)) in alpacas than in wild or domesticated ruminants and camelids originating from arid and semiarid habitats. The resulting regression equation for FMR explained over 99% of the variation and corresponded to the function FMR (kilojoules per day)=1079 (kilograms of BW0.668) (n=5, r2=0.995, P<0.001). The FMR measured in this study, the first reported for a South American camelid species, suggests that free-ranging alpacas have similar energy expenditures on a metabolic weight basis as other wild ruminants living under harsh climatic conditions.

Analysis of the low-molecular weight protein profile of egg-white and its changes during early chicken embryological development.

PubMed

Fang, Jun; Ma, Mei H; Qiu, Ning; Wu, Xiao; Jin, Yong G

2012-01-01

Many low-molecular weight (LMW) proteins in egg-white are potentially bioactive, but the mass range and number of these are not yet fully characterized. The aim of the present study was to map the LMW protein profile in egg-white and provide the basis for further understanding of the physiological function of these proteins. For this purpose, six time points (days 0, 1, 2, 3, 4, 5 of incubation) were selected in an attempt to delineate the LMW proteomic profile in egg-white and its changes during early chicken embryological development. Samples were pretreated using gel chromatography techniques prior to analysis by matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS). Protein search focused on the mass range m/z 1,000 to 8,000. One hundred and fourteen mass signal peaks of LMW proteins ranging from m/z 1,035.88 to 7,112.91 were detected at all six time points. The observed changes in the LMW protein profile during development were highly dynamic. Eighty six novel mass signal peaks of LMW proteins were generated during incubation, the origin of which could be assigned to the high-molecular weight protein fractions.The list of egg-white LMW proteins provided in this paper is by far the most comprehensive and is intended to serve as a starting point for the isolation and functional characterization of interesting LMW proteins which may play a crucial role in early embryo nutrition and immunity.

POSTNATAL SERUM INSULIN-LIKE GROWTH FACTOR I AND RETINOPATHY OF PREMATURITY.

PubMed

Jensen, Anne K; Ying, Gui-Shuang; Huang, Jiayan; Quinn, Graham E; Binenbaum, Gil

2017-05-01

Low serum IGF-1 has been associated with development of severe ROP, but no U.S. studies have been reported. We sought to determine the relationship between postnatal serum IGF-1 levels and severe ROP in a racially diverse U.S. cohort. Prospective cohort study of 74 infants with birth weight <1,251 g and a known ROP outcome at 3 Philadelphia hospitals. Weekly postnatal filter paper blood spot IGF-1 assays were measured through 42 weeks postmenstrual age. The cohort included 20 white, 45 black, 2 Asian, and 9 other infants; median gestational age was 27.6 weeks (range 23-33 weeks), and median birth weight was 975 g (range 490-1,250 g). During postmenstrual age Weeks 28 to 33, mean IGF-1 was 20.0 ng/mL (standard error 0.52) for no ROP (n = 46), 18.0 (0.49) for Stage 1 or 2 (n = 23), and 17.0 (0.70) for Stage 3 (n = 5, 2 lasered) (P = 0.003). Adjustment for birth weight and gestational age showed similar results. The presence and timing of an association between low postnatal serum IGF and ROP in a racially diverse U.S. sample were found to be consistent with those of European cohorts. This association provides the pathophysiological basis for growth-based predictive models, which could improve efficiency of ROP screening.

Body weight maintenance and levels of mutans streptococci and lactobacilli in a group of Swedish women seven years after completion of a Weight Watchers' diet.

PubMed

Köhler, Birgitta; Andreén, Ingrid

2011-01-01

The long-term effect of the WW programme on weight and oral cariogenic bacteria was evaluated after 7 yr. All WW who completed the 8-wk dietary regimen in an earlier study (n=33) and the persons in the reference group (REF) (n=27) were invited to participate. The salivary secretion rate, numbers of mutans streptococci (MS) and lactobacilli (lbc) were determined. The WW were weighed. Sustaining a 5% weight loss from the initial weight was regarded as successful weight maintenance. An interview according to a standardised questionnaire was conducted on medication,the intake of antimicrobial agents, dietary changes and experience of dental caries during the last 7 yr. 25 WW and 21 REF qualified to participate. On a group basis, weight, salivary MS and lbc displayed pre-diet levels after 7yr. 15 of the WW (60%) were below their initial weight. Successful weight maintenance was achieved by 32%. Reported changes in the intake of fat-rich products differed significantly between the WW and the REF. Nine WW reported fewer carious lesions after joining the WW. Ninety per cent of REF did not regard caries as a problem. Comparisons of pre- and post-diet data and 7 yr data indicated short-term compliance and varying outcome in terms of long-term compliance. No association was found between salivary levels of bacteria and long-term weight maintenance on a group basis. However,further well-designed longitudinal studies are required to confirm whether salivary MS could be used on an individual basis to validate reported sucrose intake in a dietary regimen.

Spectroscopic studies on some fluorescent mixed-ligand titanium(IV) complexes.

PubMed

Baranwal, Balram Prasad; Singh, Alok Kumar; Varma, Anand

2011-12-15

A novel route to synthesize some titanium(IV) complexes containing acetylacetone, straight chain carboxylic acid and hydroxycarboxylic acid ligands has been investigated. Complexes with the general formula [Ti(acac)Cl(2-n)(OOCR*)(n)(OOCC(15)H(31))] (where Hacac=acetylacetone, R*COOH=hydroxycarboxylic acids and n=1 or 2) have been isolated and characterized. Molecular weight determinations indicated mononuclear nature of the complexes. LMCT bands were observed in the electronic spectra. Infrared spectra suggested bidentate nature of the ligands. Fluorescent behaviour of the complexes was noticed on the basis of fluorescence spectra. Powder XRD indicated them to be semi-crystalline having the crystallite size in 136-185 nm range. Transmission electron microscopy (TEM) indicated spherical particles of ~ 200 nm diameter. On the basis of physico-chemical studies, it is suggested that titanium is having coordination number 7 or 8 in these complexes. Copyright © 2011 Elsevier B.V. All rights reserved.

Advanced Active Thermal Control Systems Architecture Study

NASA Technical Reports Server (NTRS)

Hanford, Anthony J.; Ewert, Michael K.

1996-01-01

The Johnson Space Center (JSC) initiated a dynamic study to determine possible improvements available through advanced technologies (not used on previous or current human vehicles), identify promising development initiatives for advanced active thermal control systems (ATCS's), and help prioritize funding and personnel distribution among many research projects by providing a common basis to compare several diverse technologies. Some technologies included were two-phase thermal control systems, light-weight radiators, phase-change thermal storage, rotary fluid coupler, and heat pumps. JSC designed the study to estimate potential benefits from these various proposed and under-development thermal control technologies for five possible human missions early in the next century. The study compared all the technologies to a baseline mission using mass as a basis. Each baseline mission assumed an internal thermal control system; an external thermal control system; and aluminum, flow-through radiators. Solar vapor compression heat pumps and light-weight radiators showed the greatest promise as general advanced thermal technologies which can be applied across a range of missions. This initial study identified several other promising ATCS technologies which offer mass savings and other savings compared to traditional thermal control systems. Because the study format compares various architectures with a commonly defined baseline, it is versatile and expandable, and is expected to be updated as needed.

Study of LH2 fueled subsonic passenger transport aircraft

NASA Technical Reports Server (NTRS)

Brewer, G. D.; Morris, R. E.

1976-01-01

The potential of using liquid hydrogen as fuel in subsonic transport aircraft was investigated to explore an expanded matrix of passenger aircraft sizes. Aircraft capable of carrying 130 passengers 2,780 km (1500 n.mi.); 200 passengers 5,560 km (3000 n.mi.); and 400 passengers on a 9,265 km (5000 n.mi.) radius mission, were designed parametrically. Both liquid hydrogen and conventionally fueled versions were generated for each payload/range in order that comparisons could be made. Aircraft in each mission category were compared on the basis of weight, size, cost, energy utilization, and noise.

DDE residues in young wood ducks (Aix sponsa) near a former DDT manufacturing plant

USGS Publications Warehouse

Fleming, W.J.; Cromartie, E.

1981-01-01

Breast muscle DDE residues were as high as 5.8 ppm wet-weight basis and 280 ppm lipid-weight basis in young wood ducks (Aix Sponsa) collected on Wheeler National Wildlife Refuge near a former DDT manufacturing plant in northern Alabama. The average DDE residue in wood ducks collected nearest the plant was 46 times background levels 74 km from the plant.

Brain region distribution and patterns of bioaccumulative perfluoroalkyl carboxylates and sulfonates in east greenland polar bears (Ursus maritimus).

PubMed

Greaves, Alana K; Letcher, Robert J; Sonne, Christian; Dietz, Rune

2013-03-01

The present study investigated the comparative accumulation of perfluoroalkyl acids (PFAAs) in eight brain regions of polar bears (Ursus maritimus, n = 19) collected in 2006 from Scoresby Sound, East Greenland. The PFAAs studied were perfluoroalkyl carboxylates (PFCAs, C(6) -C(15) chain lengths) and sulfonates (C(4) , C(6) , C(8) , and C(10) chain lengths) as well as selected precursors including perfluorooctane sulfonamide. On a wet-weight basis, blood-brain barrier transport of PFAAs occurred for all brain regions, although inner regions of the brain closer to incoming blood flow (pons/medulla, thalamus, and hypothalamus) contained consistently higher PFAA concentrations compared to outer brain regions (cerebellum, striatum, and frontal, occipital, and temporal cortices). For pons/medulla, thalamus, and hypothalamus, the most concentrated PFAAs were perfluorooctane sulfonate (PFOS), ranging from 47 to 58 ng/g wet weight, and perfluorotridecanoic acid, ranging from 43 to 49 ng/g wet weight. However, PFOS and the longer-chain PFCAs (C(10) -C(15) ) were significantly (p < 0.002) positively correlated with lipid content for all brain regions. Lipid-normalized PFOS and PFCA (C(10) -C(15) ) concentrations were not significantly (p > 0.05) different among brain regions. The burden of the sum of PFCAs, perfluoroalkyl sulfonates, and perfluorooctane sulfonamide in the brain (average mass, 392 g) was estimated to be 46 µg. The present study demonstrates that both PFCAs and perfluoroalkyl sulfonates cross the blood-brain barrier in polar bears and that wet-weight concentrations are brain region-specific. Copyright © 2012 SETAC.

Establishment of one-axis vibration test system for measurement of biodynamic response of human hand-arm system.

PubMed

Shibata, Nobuyuki; Hosoya, Naoki; Maeda, Setsuo

2008-12-01

Prolonged exposure to hand-arm vibration (HAV) due to use of hand-held power tools leads to an increased occurrence of symptoms of disorders in the vascular, neurological, and osteo-articular systems of the upper limbs called hand-arm vibration syndrome (HAVS). Biodynamic responses of the hand-arm system to vibration can be suggestive parameters that give us better assessment of exposure to HAV and fundamental data for design of low-vibration-exposure power tools. Recently, a single axis hand-arm vibration system has been installed in the Japan National Institute of Occupational Safety and Health (NIOSH). The aims of this study were to obtain the fundamental dynamic characteristics of an instrumented handle and to validate the performance and measurement accuracy of the system applied to dynamic response measurement. A pseudo-random vibration signal with a frequency range of 5-1,250 Hz and a power spectrum density of 1.0 (m/s2)2/Hz was used in this study. First the dynamic response of the instrumented handle without any weight was measured. After this measurement, the dynamic response measurement of the handle with weights mounted on the handle was performed. The apparent mass of a weight itself was obtained by using the mass cancellation method. The mass of the measuring cap on the instrumented handle was well compensated by using the mass cancellation method. Based on the 10% error tolerance, this handle can reliably measure the dynamic response represented by an apparent mass with a minimum weight of 2.0 g in a frequency range of 10.0 to 1,000 Hz. A marked increase in the AM magnitude of the weights of 15 g and 20 g in frequency ranges greater than 800 Hz is attributed not to the fundamental resonance frequency of the handle with weights, but to the fixation of the weight to the measuring cap. In this aspect, the peak of the AM magnitude can be reduced and hence should not be an obstacle to the biodynamic response measurement of the human hand-arm system. On the basis of the results obtained in this study, we conclude that this hand-arm vibration test system can be used to measure biodynamic response parameters of the human hand-arm system.

Buying pulpwood by weight as compared with volume measure

Treesearch

Michael A. Taras

1956-01-01

During the past few years several pulp and paper companies in the Southeast have started to purchase pulpwood by weight rather thanby volume. The trend toward buying by weight is strong and getting stronger. This conversion from volume to weight measurement of pulpwood brings up many questions. For instance, is the weight basis fair to both buyer and seller? What are...

Analysis of Basis Weight Uniformity of Microfiber Nonwovens and Its Impact on Permeability and Filtration Properties

NASA Astrophysics Data System (ADS)

Amirnasr, Elham

It is widely recognized that nonwoven basis weight non-uniformity affects various properties of nonwovens. However, few studies can be found in this topic. The development of uniformity definition and measurement methods and the study of their impact on various web properties such as filtration properties and air permeability would be beneficial both in industrial applications and in academia. They can be utilized as a quality control tool and would provide insights about nonwoven behaviors that cannot be solely explained by average values. Therefore, for quantifying nonwoven web basis weight uniformity we purse to develop an optical analytical tool. The quadrant method and clustering analysis was utilized in an image analysis scheme to help define "uniformity" and its spatial variation. Implementing the quadrant method in an image analysis system allows the establishment of a uniformity index that can be used to quantify the degree of uniformity. Clustering analysis has also been modified and verified using uniform and random simulated images with known parameters. Number of clusters and cluster properties such as cluster size, member and density was determined. We also utilized this new measurement method to evaluate uniformity of nonwovens produced with different processes and investigated impacts of uniformity on filtration and permeability. The results of quadrant method shows that uniformity index computed from quadrant method demonstrate a good range for non-uniformity of nonwoven webs. Clustering analysis is also been applied on reference nonwoven with known visual uniformity. From clustering analysis results, cluster size is promising to be used as uniformity parameter. It is been shown that non-uniform nonwovens has provide lager cluster size than uniform nonwovens. It was been tried to find a relationship between web properties and uniformity index (as a web characteristic). To achieve this, filtration properties, air permeability, solidity and uniformity index of meltblown and spunbond samples was measured. Results for filtration test show some deviation between theoretical and experimental filtration efficiency by considering different types of fiber diameter. This deviation can occur due to variation in basis weight non-uniformity. So an appropriate theory is required to predict the variation of filtration efficiency with respect to non-uniformity of nonwoven filter media. And the results for air permeability test showed that uniformity index determined by quadrant method and measured properties have some relationship. In the other word, air permeability decreases as uniformity index on nonwoven web increase.

Occurrence, distribution, and sources of emerging organic contaminants in tropical coastal sediments of anthropogenically impacted Klang River estuary, Malaysia.

PubMed

Omar, Tuan Fauzan Tuan; Aris, Ahmad Zaharin; Yusoff, Fatimah Md; Mustafa, Shuhaimi

2018-06-01

This baseline assessment reports on the occurrence, distribution, and sources of emerging organic contaminants (EOCs) in tropical coastal sediments of anthropogenically impacted Klang River estuary, Malaysia. Bisphenol A was the highest concentration detected at 16.84 ng g -1 dry weight, followed by diclofenac (13.88 ng g -1 dry weight) and E1 (12.47 ng g -1 dry weight). Five compounds, namely, amoxicillin, progesterone, diazinon, bisphenol A, and E1, were found in all sampling stations assessed, and other compounds such as primidone, diclofenac, testosterone, E2, and EE2 were ubiquitously present in sediment samples, with percentage of detection range from 89.04% to 98.38%. Organic carbon content and pH were the important factors controlling the fate of targeted compounds in the tropical estuarine sediment. On the basis of the literature from other studies, the sources of EOCs are thought to be from wastewater treatment plants, domestic/medical waste discharge, livestock activities, industrial waste discharge, and agricultural activities. Copyright © 2018 Elsevier Ltd. All rights reserved.

Low PCB concentrations observed in American eel (Anguilla rostrata) in six Hudson River tributaries

USGS Publications Warehouse

Limburg, K.E.; Machut, L.S.; Jeffers, P.; Schmidt, R.E.

2008-01-01

We analyzed 73 eels, collected in 2004 and 2005 above the head of tide in six Hudson River tributaries, for total PCBs, length, weight, age, and nitrogen stable isotope ratios (??15N). Mean total PCB concentration (wet weight basis) was 0.23 ppm ?? 0.08 (standard error), with a range of 0.008 to 5.4 ppm. A majority of eels (84) had concentrations below 0.25 ppm, and only seven eels (10%) had concentrations exceeding 0.5 ppm. Those eels with higher PCB concentrations were ???12 yr; there was a weak correlation of PCB concentration with ??15N and also with weight. Compared to recent (2003) data from the mainstem of the Hudson River estuary, these results indicate that tributaries are generally much less contaminated with PCBs. We hypothesize that those tributary eels with high PCB concentrations were relatively recent immigrants from the mainstem. Given concern over the possible adverse effects of PCBs on eel reproduction, these tributaries may serve as refugia. Therefore, providing improved access to upland tributaries may be critically important to this species. ?? 2008 Northeastern Naturalist.

Long-term Drug Treatment for Obesity: A Systematic and Clinical Review

PubMed Central

Yanovski, Susan Z.; Yanovski, Jack A.

2014-01-01

Importance Thirty-six percent of US adults are obese and many cannot lose sufficient weight to improve health with lifestyle interventions alone. Objective Conduct a systematic review of medications currently approved in the US for obesity treatment in adults. We also discuss off-label use of medications studied for obesity and provide considerations for obesity medication use in clinical practice. Evidence Acquisition A PubMed search from inception through September, 2013 was performed to find meta-analyses, systematic reviews, and randomized, placebo-controlled trials for currently-approved obesity medications lasting ≥1y, that had a primary or secondary outcome of body weight, included ≥50 participants per group, reported ≥50% retention, and reported results on an intention-to-treat basis. Studies of medications approved for other purposes but tested for obesity treatment were also reviewed. Results Obesity medications approved for long-term use, when prescribed with lifestyle interventions, produce additional weight loss relative to placebo ranging from approximately 3% of initial weight for orlistat and lorcaserin to 9% for top-dose (15/92mg) phentermine/topiramate-ER at 1y. The proportion of patients achieving clinically-meaningful (≥5%) weight loss ranges from 37–47% for lorcaserin, 35–73% for orlistat, and 67–70% for top-dose phentermine/topiramate-ER. All three produce greater improvements in many cardiometabolic risk factors than placebo, but no obesity medication has been shown to reduce cardiovascular morbidity or mortality. Most prescriptions are for noradrenergic medications, despite their approval only for short-term use and limited data for their long-term safety and efficacy. Conclusions/Relevance Medications approved for long-term obesity treatment, when used as an adjunct to lifestyle intervention, lead to greater mean weight loss and an increased likelihood of achieving clinically-meaningful 1-year weight loss relative to placebo. By discontinuing medication in patients who do not respond with weight loss ≥5%, clinicians can decrease their patients' exposure to the risks and costs of drug treatment when there is little prospect of long-term benefit. PMID:24231879

Composite Sandwich Structures for Shock Mitigation and Energy Absorption

DTIC Science & Technology

2016-06-28

analysis of the blast performance of foam -core, composite sandwich panels was that on a per unit areal weight density basis, lighter and more crushable... foam cores offered greater blast resistance and energy absorption than the heavier and stronger foam cores. This was found to be the case even on an...absolute weight basis for cuNed sandwich panels and panels subjected to underwater blast. 15. SUBJECT TERMS composite; foam -core sandwich; blast

Determination of trace elements and their concentrations in clay balls: problem of geophagia practice in Ghana.

PubMed

Arhin, Emmanuel; Zango, Musah S

2017-02-01

Ten samples of 100 g weight were subsampled from 1400 g of the clay balls from which the contained trace element levels were determined by X-ray fluorescence technique. The results of trace elements in the clay balls were calibrated using certified reference materials "MAJMON" and "BH-1." The results showed elevated concentrations but with different concentration levels in the regions, particularly with arsenic, chromium, cobalt, Cs, Zr and La. These trace elements contained in the clay balls are known to be hazardous to human health. Thence the relatively high concentrations of these listed trace elements in clay balls in the three regions, namely Ashanti, Upper East and Volta, which are widely sold in markets in Ghana, could present negative health impact on consumers if consumed at 70 g per day or more and on regular basis. On the basis of these, the study concludes an investigation to establish breakeven range for trace element concentrations in the clay balls as it has been able to demonstrate the uneven and elevated values in them. The standardized safe ranges of trace elements will make the practice safer for the people that ingest clay balls in Ghana.

Compositional and toxicological evaluation of the diazotrophic cyanobacterium, Cyanothece sp. strain ATCC 51142

NASA Technical Reports Server (NTRS)

Schneegurt, M. A.; Arieli, B.; McKeehen, J. D.; Stephens, S. D.; Nielsen, S. S.; Saha, P. R.; Trumbo, P. R.; Sherman, L. A.; Mitchell, C. A. (Principal Investigator)

1995-01-01

Compositional analyses of Cyanothece sp. strain ATCC 51142 showed high protein (50-60%) and low fat (0.4-1%) content, and the ability to synthesize vitamin B12. The amino acid profile indicated that Cyanothece sp. was a balanced protein source. Fatty acids of the 18:3n-3 type were also present. Mineral analyses indicated that the cellular biomass may be a good source of Fe, Zn and Na. Caloric content was 4.5 to 5.1 kcal g dry weight-1 and the carbon content was approximately 40% on a dry weight basis. Nitrogen content was 8 to 9% on a dry weight basis and total nucleic acids were 1.3% on a dry weight basis. Short-term feeding studies in rats followed by histopathology found no toxicity or dietary incompatibility problems. The level of uric acid and allantoin in urine and tissues was low, suggesting no excess of nucleic acids, as sometimes reported in the past for a cyanobacteria-containing diet. The current work discusses the potential implications of these results for human nutrition applications.

Production and characterization of a biodegradable poly (hydroxybutyrate-co-hydroxyvalerate) (PHB-co-PHV) copolymer by moderately haloalkalitolerant Halomonas campisalis MCM B-1027 isolated from Lonar Lake, India.

PubMed

Kulkarni, S O; Kanekar, P P; Nilegaonkar, S S; Sarnaik, S S; Jog, J P

2010-12-01

Several microorganisms produce polyhydroxyalkanoates (PHA). They are accumulated intracellularly as energy storage compounds. The PHAs are of interest because of their potential in biomedical applications. Halophilic bacteria and archaea are known to produce polyhydroxybutyrate (PHB). This paper describes production of a biodegradable copolymer, PHB-co-PHV by a moderately haloalkalitolerant Halomonas campisalis, isolated from Lonar Lake, India. The production of PHA was in the range of 45-81% on dry cell weight basis when the organism was grown in a production medium containing 1% (w/v) maltose and 0.1% (w/v) yeast extract, at pH ranging from 6 to 9 with an inoculum density of 10(5)-10(7) cells/ml of medium, for incubation period of 15-30 h and at 37 degrees C. The polymer produced by the organism is a hydroxyester with molecular weight of 1.3014 x 10(6). Its melting temperature was 171 degrees C. The (1)H NMR analysis revealed that the polymer was a copolymer of PHB-co-PHV. This could be achieved by providing simple carbon source viz. maltose. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Design of an optimum computer vision-based automatic abalone (Haliotis discus hannai) grading algorithm.

PubMed

Lee, Donggil; Lee, Kyounghoon; Kim, Seonghun; Yang, Yongsu

2015-04-01

An automatic abalone grading algorithm that estimates abalone weights on the basis of computer vision using 2D images is developed and tested. The algorithm overcomes the problems experienced by conventional abalone grading methods that utilize manual sorting and mechanical automatic grading. To design an optimal algorithm, a regression formula and R(2) value were investigated by performing a regression analysis for each of total length, body width, thickness, view area, and actual volume against abalone weights. The R(2) value between the actual volume and abalone weight was 0.999, showing a relatively high correlation. As a result, to easily estimate the actual volumes of abalones based on computer vision, the volumes were calculated under the assumption that abalone shapes are half-oblate ellipsoids, and a regression formula was derived to estimate the volumes of abalones through linear regression analysis between the calculated and actual volumes. The final automatic abalone grading algorithm is designed using the abalone volume estimation regression formula derived from test results, and the actual volumes and abalone weights regression formula. In the range of abalones weighting from 16.51 to 128.01 g, the results of evaluation of the performance of algorithm via cross-validation indicate root mean square and worst-case prediction errors of are 2.8 and ±8 g, respectively. © 2015 Institute of Food Technologists®

42 CFR 416.167 - Basis of payment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... classification (APC) groups and payment weights. (1) ASC covered surgical procedures are classified using the APC... section, an ASC relative payment weight is determined based on the APC relative payment weight for each covered surgical procedure and covered ancillary service that has an applicable APC relative payment...

Ranking of physiotherapeutic evaluation methods as outcome measures of stifle functionality in dogs.

PubMed

Hyytiäinen, Heli K; Mölsä, Sari H; Junnila, Jouni T; Laitinen-Vapaavuori, Outi M; Hielm-Björkman, Anna K

2013-04-08

Various physiotherapeutic evaluation methods are used to assess the functionality of dogs with stifle problems. Neither validity nor sensitivity of these methods has been investigated. This study aimed to determine the most valid and sensitive physiotherapeutic evaluation methods for assessing functional capacity in hind limbs of dogs with stifle problems and to serve as a basis for developing an indexed test for these dogs. A group of 43 dogs with unilateral surgically treated cranial cruciate ligament deficiency and osteoarthritic findings was used to test different physiotherapeutic evaluation methods. Twenty-one healthy dogs served as the control group and were used to determine normal variation in static weight bearing and range of motion.The protocol consisted of 14 different evaluation methods: visual evaluation of lameness, visual evaluation of diagonal movement, visual evaluation of functional active range of motion and difference in thrust of hind limbs via functional tests (sit-to-move and lie-to-move), movement in stairs, evaluation of hind limb muscle atrophy, manual evaluation of hind limb static weight bearing, quantitative measurement of static weight bearing of hind limbs with bathroom scales, and passive range of motion of hind limb stifle (flexion and extension) and tarsal (flexion and extension) joints using a universal goniometer. The results were compared with those from an orthopaedic examination, force plate analysis, radiographic evaluation, and a conclusive assessment. Congruity of the methods was assessed with a combination of three statistical approaches (Fisher's exact test and two differently calculated proportions of agreeing observations), and the components were ranked from best to worst. Sensitivities of all of the physiotherapeutic evaluation methods against each standard were calculated. Evaluation of asymmetry in a sitting and lying position, assessment of muscle atrophy, manual and measured static weight bearing, and measurement of stifle passive range of motion were the most valid and sensitive physiotherapeutic evaluation methods. Ranking of the various physiotherapeutic evaluation methods was accomplished. Several of these methods can be considered valid and sensitive when examining the functionality of dogs with stifle problems.

Ranking of physiotherapeutic evaluation methods as outcome measures of stifle functionality in dogs

PubMed Central

2013-01-01

Background Various physiotherapeutic evaluation methods are used to assess the functionality of dogs with stifle problems. Neither validity nor sensitivity of these methods has been investigated. This study aimed to determine the most valid and sensitive physiotherapeutic evaluation methods for assessing functional capacity in hind limbs of dogs with stifle problems and to serve as a basis for developing an indexed test for these dogs. A group of 43 dogs with unilateral surgically treated cranial cruciate ligament deficiency and osteoarthritic findings was used to test different physiotherapeutic evaluation methods. Twenty-one healthy dogs served as the control group and were used to determine normal variation in static weight bearing and range of motion. The protocol consisted of 14 different evaluation methods: visual evaluation of lameness, visual evaluation of diagonal movement, visual evaluation of functional active range of motion and difference in thrust of hind limbs via functional tests (sit-to-move and lie-to-move), movement in stairs, evaluation of hind limb muscle atrophy, manual evaluation of hind limb static weight bearing, quantitative measurement of static weight bearing of hind limbs with bathroom scales, and passive range of motion of hind limb stifle (flexion and extension) and tarsal (flexion and extension) joints using a universal goniometer. The results were compared with those from an orthopaedic examination, force plate analysis, radiographic evaluation, and a conclusive assessment. Congruity of the methods was assessed with a combination of three statistical approaches (Fisher’s exact test and two differently calculated proportions of agreeing observations), and the components were ranked from best to worst. Sensitivities of all of the physiotherapeutic evaluation methods against each standard were calculated. Results Evaluation of asymmetry in a sitting and lying position, assessment of muscle atrophy, manual and measured static weight bearing, and measurement of stifle passive range of motion were the most valid and sensitive physiotherapeutic evaluation methods. Conclusions Ranking of the various physiotherapeutic evaluation methods was accomplished. Several of these methods can be considered valid and sensitive when examining the functionality of dogs with stifle problems. PMID:23566355

7 CFR 56.4 - Basis of grading service.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT (CONTINUED) VOLUNTARY GRADING OF SHELL EGGS Grading of Shell Eggs General § 56.4 Basis of grading service. (a) Any grading service in... the basis of the “United States Standards, Grades, and Weight Classes for Egg Shells.” However...

7 CFR 56.4 - Basis of grading service.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT (CONTINUED) VOLUNTARY GRADING OF SHELL EGGS Grading of Shell Eggs General § 56.4 Basis of grading service. (a) Any grading service in... the basis of the “United States Standards, Grades, and Weight Classes for Egg Shells.” However...

Spatial distribution of low birthweight infants in Taubaté, São Paulo, Brazil

PubMed Central

Nascimento, Luiz Fernando C.; Costa, Thais Moreira; Zöllner, Maria Stella A. da C.

2013-01-01

OBJECTIVE: To identify the spatial pattern of low birth weight infants in the city of Taubaté, São Paulo, Southeast Brazil. METHODS: Ecological and exploratory study, developed with the data acquired from the Health Department of Taubaté, regarding the period from January 1st 2006 and December 31st 2010. Birth certificates were used to obtain the data from infants weighing less than 2500g. A digital basis of census tracts was applied and the Global Moran index (IM) was estimated. Thematic maps were built for the distribution of low birth weight, health centers and tracts, according to the priority care (Moran map). The adopted statistical significance was α=5% and TerraView software conducted the spatial analysis. RESULTS: There were 18,915 live births during the study period, with 1,817 low birth weight infants (9.6%). The low birth weight infants' prevalence during the period ranged from 9.3 to 9.8%. A total of 1,185 infants with known addresses, compatible with the digital base (65.2% of low birth weight infants), were included. The IM for low birth weight was 0.12, with p<0.01; regarding the health centers distribution, IM was -0.07, with p=0.01. The Moran map identified 11 census tracts with high priority for intervention by health managers, located in the outskirts of the city. CONCLUSIONS: The spatial analysis identified the low birth weight distribution by census tracts and the sectors with a high priority for intervention. PMID:24473951

Normal distribution of body weight gain in male Sprague-Dawley rats fed a high-energy diet.

PubMed

Archer, Zoe A; Rayner, D Vernon; Rozman, Jan; Klingenspor, Martin; Mercer, Julian G

2003-11-01

To investigate the effect of a high-energy (HE) diet on caloric intake, body weight, and related parameters in outbred male Sprague-Dawley (SD) rats. Twenty-eight SD rats were fed either chow (C) for 19 weeks or HE diet for 14 weeks and then C for 5 weeks. Blood hormones and metabolites were assayed, and expression of uncoupling protein-1 and hypothalamic energy-balance-related genes were determined by Northern blotting and in situ hybridization, respectively. HE rats gained body weight more rapidly than C animals with a range of weight gains, but there was no evidence that weight gain was bimodally distributed. Caloric intake was transiently elevated after introduction of the HE diet. Transfer of HE rats back to C resulted in a drop in caloric intake, but a stable body weight. In terminal analysis, two of four dissected adipose tissue depots were heavier in rats that had previously been fed HE diet. Blood leptin, insulin, glucose, and nonesterified fatty acids were not different between the groups. Uncoupling protein-1 mRNA was elevated in interscapular brown adipose tissue from HE rats. There was a trend for agouti-related peptide mRNA in the hypothalamic arcuate nucleus to be higher in HE rats. Contrary to other studies of the SD rat on HE diet, body weight and other measured parameters were normally distributed. There was no segregation into two distinct populations on the basis of susceptibility to diet-induced obesity. This characteristic may be dependent on the breeding colony from which animals were sourced.

The 24-hour urine collection: gold standard or historical practice?

PubMed

Côté, Anne-Marie; Firoz, Tabassum; Mattman, André; Lam, Elaine M; von Dadelszen, Peter; Magee, Laura A

2008-12-01

The objective of the study was to determine completeness of 24-hour urine collection in pregnancy. This was a retrospective laboratory/chart review of 24-hour urine collections at British Columbia Women's Hospital. Completeness was assessed by 24-hour urinary creatinine excretion (UcreatV): expected according to maternal weight for single collections and between-measurement difference for serial collections. For 198 randomly selected pregnant women with a hypertensive disorder (63% preeclampsia), 24-hour urine collections were frequently inaccurate (13-54%) on the basis of UcreatV of 97-220 micromol/kg per day (11.0-25.0 mg/kg per day) or 133-177 micromol/kg per day (15.1-20.1 mg/kg per day) of prepregnancy weight (respectively). Lean body weight resulted in more inaccurate collections (24-68%). The current weight was frequently unavailable (28%) and thus not used. For 161 women (81% proteinuric) with serial 24-hour urine levels, a median [interquartile range] of 11 [5-31] days apart, between-measurement difference in UcreatV was 14.4% [6.0-24.9]; 40 women (24.8%) had values 25% or greater, exceeding analytic and biologic variation. Twenty-four hour urine collection is frequently inaccurate and not a precise measure of proteinuria or creatinine clearance.

Genetic Analysis of Kernel Traits in Maize-Teosinte Introgression Populations.

PubMed

Liu, Zhengbin; Garcia, Arturo; McMullen, Michael D; Flint-Garcia, Sherry A

2016-08-09

Seed traits have been targeted by human selection during the domestication of crop species as a way to increase the caloric and nutritional content of food during the transition from hunter-gather to early farming societies. The primary seed trait under selection was likely seed size/weight as it is most directly related to overall grain yield. Additional seed traits involved in seed shape may have also contributed to larger grain. Maize (Zea mays ssp. mays) kernel weight has increased more than 10-fold in the 9000 years since domestication from its wild ancestor, teosinte (Z. mays ssp. parviglumis). In order to study how size and shape affect kernel weight, we analyzed kernel morphometric traits in a set of 10 maize-teosinte introgression populations using digital imaging software. We identified quantitative trait loci (QTL) for kernel area and length with moderate allelic effects that colocalize with kernel weight QTL. Several genomic regions with strong effects during maize domestication were detected, and a genetic framework for kernel traits was characterized by complex pleiotropic interactions. Our results both confirm prior reports of kernel domestication loci and identify previously uncharacterized QTL with a range of allelic effects, enabling future research into the genetic basis of these traits. Copyright © 2016 Liu et al.

Genetic Analysis of Kernel Traits in Maize-Teosinte Introgression Populations

PubMed Central

Liu, Zhengbin; Garcia, Arturo; McMullen, Michael D.; Flint-Garcia, Sherry A.

2016-01-01

Seed traits have been targeted by human selection during the domestication of crop species as a way to increase the caloric and nutritional content of food during the transition from hunter-gather to early farming societies. The primary seed trait under selection was likely seed size/weight as it is most directly related to overall grain yield. Additional seed traits involved in seed shape may have also contributed to larger grain. Maize (Zea mays ssp. mays) kernel weight has increased more than 10-fold in the 9000 years since domestication from its wild ancestor, teosinte (Z. mays ssp. parviglumis). In order to study how size and shape affect kernel weight, we analyzed kernel morphometric traits in a set of 10 maize-teosinte introgression populations using digital imaging software. We identified quantitative trait loci (QTL) for kernel area and length with moderate allelic effects that colocalize with kernel weight QTL. Several genomic regions with strong effects during maize domestication were detected, and a genetic framework for kernel traits was characterized by complex pleiotropic interactions. Our results both confirm prior reports of kernel domestication loci and identify previously uncharacterized QTL with a range of allelic effects, enabling future research into the genetic basis of these traits. PMID:27317774

Developing a Weighted Measure of Speech Sound Accuracy

ERIC Educational Resources Information Center

Preston, Jonathan L.; Ramsdell, Heather L.; Oller, D. Kimbrough; Edwards, Mary Louise; Tobin, Stephen J.

2011-01-01

Purpose: To develop a system for numerically quantifying a speaker's phonetic accuracy through transcription-based measures. With a focus on normal and disordered speech in children, the authors describe a system for differentially weighting speech sound errors on the basis of various levels of phonetic accuracy using a Weighted Speech Sound…

High PCB residues in birds from the Sheboygan River, Wisconsin

USGS Publications Warehouse

Heinz, Gary; Swineford, Douglas M.; Katsma, Dale E.

1984-01-01

Organochlorine residues were measured in the carcasses and, in some cases, brains and stomach contents of four species of birds collected along the Sheboygan River, Wisconsin during the years 1976 to 1980. Polychlorinated biphenyls (PCBs) were high in all samples and were the contaminants of greatest concern. Carcass residues ranged from 23 to 218 ppm PCBs on a wet weight basis; these are levels associated with reproductive impairment in laboratory studies with some birds. Food items in the stomachs of collected birds contained from 12 to 58 ppm PCBs, indicating a heavy contamination of food sources. The brain of one bird contained 220 ppm PCBs, a level that is not in the lethal range but is very high. Birds feeding in the contaminated portions of the Sheboygan River may have been harmed by high PCB levels.

SU-E-T-422: Fast Analytical Beamlet Optimization for Volumetric Intensity-Modulated Arc Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chan, Kenny S K; Lee, Louis K Y; Xing, L

2015-06-15

Purpose: To implement a fast optimization algorithm on CPU/GPU heterogeneous computing platform and to obtain an optimal fluence for a given target dose distribution from the pre-calculated beamlets in an analytical approach. Methods: The 2D target dose distribution was modeled as an n-dimensional vector and estimated by a linear combination of independent basis vectors. The basis set was composed of the pre-calculated beamlet dose distributions at every 6 degrees of gantry angle and the cost function was set as the magnitude square of the vector difference between the target and the estimated dose distribution. The optimal weighting of the basis,more » which corresponds to the optimal fluence, was obtained analytically by the least square method. Those basis vectors with a positive weighting were selected for entering into the next level of optimization. Totally, 7 levels of optimization were implemented in the study.Ten head-and-neck and ten prostate carcinoma cases were selected for the study and mapped to a round water phantom with a diameter of 20cm. The Matlab computation was performed in a heterogeneous programming environment with Intel i7 CPU and NVIDIA Geforce 840M GPU. Results: In all selected cases, the estimated dose distribution was in a good agreement with the given target dose distribution and their correlation coefficients were found to be in the range of 0.9992 to 0.9997. Their root-mean-square error was monotonically decreasing and converging after 7 cycles of optimization. The computation took only about 10 seconds and the optimal fluence maps at each gantry angle throughout an arc were quickly obtained. Conclusion: An analytical approach is derived for finding the optimal fluence for a given target dose distribution and a fast optimization algorithm implemented on the CPU/GPU heterogeneous computing environment greatly reduces the optimization time.« less

Effect of Blade-surface Finish on Performance of a Single-stage Axial-flow Compressor

NASA Technical Reports Server (NTRS)

Moses, Jason J; Serovy, George, K

1951-01-01

A set of modified NACA 5509-34 rotor and stator blades was investigated with rough-machine, hand-filed, and highly polished surface finishes over a range of weight flows at six equivalent tip speeds from 672 to 1092 feet per second to determine the effect of blade-surface finish on the performance of a single-stage axial-flow compressor. Surface-finish effects decreased with increasing compressor speed and with decreasing flow at a given speed. In general, finishing blade surfaces below the roughness that may be considered aerodynamically smooth on the basis of an admissible-roughness formula will have no effect on compressor performance.

Influence of Alternative Engine Concepts on LCTR2 Sizing and Mission Profile

NASA Technical Reports Server (NTRS)

Acree, C. W., Jr.; Snyder, Christopher A.

2012-01-01

The Large Civil Tiltrotor (LCTR) was developed as part of the NASA Heavy Lift Rotorcraft Systems Investigation in order to establish a consistent basis for evaluating the benefits of advanced technology for large tiltrotors. The concept has since evolved into the second-generation LCTR2, designed to carry 90 passengers for 1,000 nm at 300 knots, with vertical takeoff and landing. This paper examines the impact of advanced propulsion system concepts on LCTR2 sizing. Two concepts were studied: an advanced, single-speed engine with a conventional power turbine layout (Advanced Conventional Engine, or ACE), and a variable-speed power turbine engine (VSPT). The ACE is the lighter engine, but requires a multi-speed (shifting) gearbox, whereas the VSPT uses a lighter, fixed-ratio gearbox. The NASA Design and Analysis of Rotorcraft (NDARC) design code was used to study the trades between rotor and engine efficiency and weight. Rotor performance was determined by Comprehensive Analytical Model of Rotorcraft Aerodynamics and Dynamics (CAMRAD II), and engine performance was estimated with the Numerical Propulsion System Simulation (NPSS). Design trades for the ACE vs. VSPT are presented in terms of vehicle weight empty for variations in mission altitude and range; the effect of different One Engine Inoperative (OEI) criteria are also examined. Because of its strong effect on gearbox weight and on both rotor and engine efficiency, rotor speed was chosen as the reference design variable for comparing design trades. The two propulsion concepts had nearly identical vehicle weights and mission fuel consumption, and their relative advantages varied little with cruise altitude, mission range, or OEI criteria; high cruise altitude and low cruise tip speed were beneficial for both concepts.

Evaluating an insurance-sponsored weight management program with the RE-AIM Model, West Virginia, 2004-2008.

PubMed

Abildso, Christiaan G; Zizzi, Sam J; Reger-Nash, Bill

2010-05-01

Evaluations of weight management programs in real-world settings are lacking. The RE-AIM model (reach, effectiveness, adoption, implementation, maintenance) was developed to address this deficiency. Our primary objective was to evaluate a 12-week insurance-sponsored weight management intervention by using the RE-AIM model, including short-term and long-term individual outcomes and setting-level implementation factors. Our secondary objective was to critique the RE-AIM model and its revised calculation methods. We created operational definitions for components of the 5 RE-AIM indices and used standardized effect size values from various statistical procedures to measure multiple components or outcomes within each index. We used chi(2) analysis to compare categorical variables and repeated-measures analysis of variance to assess the magnitude of outcome changes over time. On the basis of data for 1,952 participants and surveys completed by administrators at 23 sites, RE-AIM indices ranging from 0 to 100 revealed low program reach and adoption (5.4 and 8.8, respectively), moderate effectiveness (43.8), high implementation (91.4), low to moderate individual maintenance (21.2), and moderate to high site maintenance (77.8). Median (interquartile range) weight loss was 13 lb (6.5-21.4 lb) among participants who completed phase I (12 weeks; 76.5%) and 15 lb (6.1-30.3 lb) among those who completed phase II (1 year; 45.7%). This program had a significant, positive effect on participants and has been sustainable but needs to be expanded for more public health benefit. The RE-AIM model provided a useful framework to determine program strengths and weaknesses and to present them to the insurance agency and public health decision makers.

Bathythermal distribution, maturity, and growth of lake trout strains stocked in U.S. waters of Lake Ontario, 1978-1993

USGS Publications Warehouse

Elrod, Joseph H.; O'Gorman, Robert; Schneider, Clifford P.

1996-01-01

Bathythermal distributions, sexual maturity, and growth of lake trout (Salvelinus namaycush) strains stocked in Lake Ontario were determined for fish collected with trawls and gill nets in 1978-93. The purpose was to augment the basis for deciding which strains to continue stocking in an effort to reestablish a self-sustaining population. The Clearwater Lake (CWL) strain was found in shallower, warmer water than all other strains; the Seneca Lake (SEN) strain was usually shallower than the Jenny Lake (JEN) and Lake Superior (SUP) strains at ages 1 and 2 but was usually deeper at age 3 and older. Depth distribution of the 'Ontario strain'--from gametes of several strains that survived to maturity in Lake Ontario-- was similar to that of the SEN and SUP strains. About half the males matured at age 4 and half the females at age 5; males < 500 mm and females < 600 mm long were rarely mature. Least-sqaures mean lengths and weights of the CWL strain were greater than those of all other strains through age 4. At age 7 and older, CWL and JEN fish were generally smaller than all other strains. Means lengths and weights of males and females of the same age and strain frequently differed at age 4 and older. Growth in weight at age 4 and older was not associated with biomass indices of prey fishes. Differences in growth rates among strains were associated with bathythermal distribution which is a heritable trait. Weight-length regressions differed by year, sex, and stage of maturity but were rarely different among strains. Competition for space appeared to affect condition of large lake trout. Growth rates and maturity schedules provide little basis for recommending stocking one strain in preference to another. Depth ranges of strains overlapped widely, but lake trout occupied only about one-fourth of available bottom habitat. Stocking several strains should be continued to maximize use of sustainable habitat.

7 CFR 59.202 - Mandatory daily reporting for barrows and gilts.

Code of Federal Regulations, 2010 CFR

2010-01-01

... live weight basis; and (iv) The base price and premiums and discounts paid for carcass characteristics... unavailable due to pricing that is determined on a delayed basis. The packer shall report information on such... reporting day, unless such information is unavailable due to pricing that is determined on a delayed basis...

Bovine and porcine heparins: different drugs with similar effects on human haemodialysis

PubMed Central

2013-01-01

Background Heparins from porcine and bovine intestinal mucosa differ in their structure and also in their effects on coagulation, thrombosis and bleeding. However, they are used as undistinguishable drugs. Methods We compared bovine and porcine intestinal heparin administered to patients undergoing a particular protocol of haemodialysis. We compared plasma concentrations of these two drugs and also evaluated how they affect patients and the dialyzer used. Results Compared with porcine heparin, bovine heparin achieved only 76% of the maximum plasma concentration as IU mL-1. This observation is consistent with the activities observed in the respective pharmaceutical preparations. When the plasma concentrations were expressed on weight basis, bovine heparin achieved a maximum concentration 1.5 fold higher than porcine heparin. The reduced anticoagulant activity and higher concentration, on weight basis, achieved in the plasma of patients under dialysis using bovine instead of porcine heparin did not affect significantly the patients or the dialyzer used. The heparin dose is still in a range, which confers security and safety to the patients. Discussion Despite no apparent difference between bovine and porcine intestinal heparins in the haemodialysis practice, these two types of heparins should be used as distinct drugs due to their differences in structure and biological effects. Conclusions The reduced anticoagulant activity achieved in the plasma of patients under dialysis using bovine instead of porcine heparin did not affect significantly the patients or the dialyzer. PMID:23763719

Growth of Chaetomium cellulolyticum on Alkali-Pretreated Hardwood Sawdust Solids and Pretreatment Liquor

PubMed Central

Pamment, N.; Moo-Young, M.; Hsieh, F.-H.; Robinson, C. W.

1978-01-01

The treatment of a hardwood sawdust with 1% NaOH solution at 121°C dissolved 19.7% of the dry matter, mainly hemicellulose and lignin. Fermentation of the treated solids by Chaetomium cellulolyticum for 48 h gave a product containing 12.5% crude protein (total N × 6.25) on a dry weight basis. The in vitro rumen digestibility of the 48-h fermentation product was 30%, compared to 24% for the alkali-treated but unfermented sawdust. Growth was independent of sawdust particle size in the range 40 to 100 mesh. Fermentation of the pretreatment liquor gave a product containing up to 50% crude protein (dry weight basis) with an in vitro rumen digestibility of 65 to 76%. Approximately 6.7 g of crude protein was obtained from the treated solids and 2.2 g from the pretreatment liquor per 100 g of sawdust treated. The product from the pretreatment liquor fermentation has potential as a high-protein animal feed supplement but could not be produced economically without an outlet for the relatively indigestible product from the solids fermentation. Growth on the pretreatment liquor was strongly pH dependent; there was a considerable increase in the lag phase when the pH was lowered from 7.5 to 5.2. This effect appears to be due to an inhibitor whose toxicity is reduced at high pH. PMID:16345308

Comparison of polybrominated diphenyl ethers in fish, vegetables, and meats and levels in human milk of nursing women in Japan.

PubMed

Ohta, Souichi; Ishizuka, Daisuke; Nishimura, Hajime; Nakao, Teruyuki; Aozasa, Osamu; Shimidzu, Yoshiko; Ochiai, Fumie; Kida, Takafumi; Nishi, Masatoshi; Miyata, Hideaki

2002-02-01

At present, little is known about the occurrence of polybrominated diphenyl ethers (PBDEs) in fish and food products sold in Japan. To investigate whether human exposure to PBDEs through the diet is significant, the concentrations of PBDEs were determined in fish and in meat and vegetables sold in two food markets in the city of Hirakata, Osaka prefecture. The concentrations of PBDEs in the breast milk of 12 primiparae nursing women at one month after delivery also were determined to ascertain the relationship between the levels found in the diet and levels in humans. sigma PBDE concentrations ranged between 21 and 1650 pg/g fresh weight in the edible tissues of five species of fish and one shellfish species. The highest concentrations were measured in yellow-fin tuna, followed by short-necked clam, salmon, yellowtail, mackerel and young yellowtail. Interestingly, sigma PBDE concentrations were not statistically significantly different in two cultured mackerel samples from Japan and mackerel collected from northern European waters. sigma PBDE concentrations in beef, pork and chicken meat (ranging between 6.25 and 63.6 pg/g fresh weight) and in three different vegetables (ranging between 38.4 and 134 pg/g fresh weight) were significantly lower than the concentrations in fish. In human milk, sigma PBDE concentrations ranged between 668 and 2840 pg/g lipid basis, which is comparable to the levels in populations of nursing women reported in Sweden and elsewhere. There was a strong positive relationship between PBDE concentrations in human milk and dietary intake of fish and shellfish, which was established in the women from responses to a questionaire on food consumption habits. The results of this study of food products commonly consumed in Japan and the levels found in nursing women raise a concern about low level PBDE contamination of fish and other foods intended for human consumption.

Questionnaire-based survey of parturition in the queen.

PubMed

Musters, J; de Gier, J; Kooistra, H S; Okkens, A C

2011-06-01

The lack of scientific data concerning whether parturition in the queen proceeds normally or not may prevent veterinarians and cat owners from recognizing parturition problems in time. A questionnaire-based study of parturition in 197 queens was performed to determine several parameters of parturition and their influence on its progress. The mean length of gestation was 65.3 days (range 57 to 72 days) and it decreased with increasing litter size (P = 0.02). The median litter size was 4.5 kittens (range 1 to 9), with more males (53%) than females (46%) (P = 0.05). Sixty-nine percent of the kittens were born in anterior presentation and 31% in posterior presentation, indicating that either can be considered normal in the cat. Males were born in posterior position (34%) more often than females (26%) (P = 0.03). The mean birth weight was 98 g (range of 35 to 167 g) and decreased with increasing litter size (P < 0.01). Mean birth weight was higher in males and kittens born in posterior presentation (P < 0.01). Forty-four (5%) of the 887 kittens were stillborn. This was not correlated with the presentation at expulsion but stillborn kittens were more often female (P = 0.02) and weighed less than those born alive (P = 0.04). The median interkitten time was 30 min (range 2 to 343 min) and 95% were born within 100 min after expulsion of the preceding kitten. The interkitten time as a measure of the progress of parturition was not influenced by the kitten's gender, presentation at expulsion, birth weight, or stillbirth, or by the parity of the queen. The results of this study can be used to develop reference values for parturition parameters in the queen, both to determine whether a given parturition is abnormal and as the basis for a parturition protocol. Copyright © 2011 Elsevier Inc. All rights reserved.

48 CFR 237.7101 - Solicitation provisions and contract clauses.

Code of Federal Regulations, 2010 CFR

2010-10-01

... clause at 252.237-7015, Loss or Damage (Weight of Articles), in solicitations and contracts for laundry..., Instruction to Offerors (Bulk Weight), in solicitations for laundry services to be provided on a bulk weight basis. (c) Use the clause at 252.237-7014, Loss or Damage (Count-of-Articles), in solicitations and...

40 CFR 98.464 - Monitoring and QA/QC requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... = Degradable organic content of waste stream in Year X (weight fraction, wet basis) FDOC = Fraction of the volatile residue that is degradable organic carbon (weight fraction). Use a default value of 0.6...

Cognitive-behavioral and pharmacological interventions for premenstrual syndrome or premenstrual dysphoric disorder: a meta-analysis.

PubMed

Kleinstäuber, Maria; Witthöft, Michael; Hiller, Wolfgang

2012-09-01

The current meta-analysis investigates the efficacy of psychotherapeutic interventions and psychopharmacotherapy for premenstrual syndrome (PMS) and premenstrual dysphoric disorder. Based on a multiple-phase literature search, controlled trials were selected according to a priori defined inclusion criteria. Data were extracted on the basis of a standardized coding scheme. The standardized weighted mean difference (random effects model) was used as effect size index. Dependent on outcome, 22 included studies obtained small to medium effect sizes for cognitive-behavioral interventions (range: d(+) = 0.24-0.70) and for serotonergic antidepressants (range: d(+) = 0.29-0.58), at post-assessment. Follow-ups were performed only in studies of cognitive-behavioral interventions (range: d(+) = 0.46-0.74). There was no evidence of a publication bias. For both cognitive-behavioral interventions and serotonergic antidepressants, efficacy in treatment of PMS was found to not be satisfactory. Future research should possibly focus more on a combination of both approaches.

The advantage of flexible neuronal tunings in neural network models for motor learning

PubMed Central

Marongelli, Ellisha N.; Thoroughman, Kurt A.

2013-01-01

Human motor adaptation to novel environments is often modeled by a basis function network that transforms desired movement properties into estimated forces. This network employs a layer of nodes that have fixed broad tunings that generalize across the input domain. Learning is achieved by updating the weights of these nodes in response to training experience. This conventional model is unable to account for rapid flexibility observed in human spatial generalization during motor adaptation. However, added plasticity in the widths of the basis function tunings can achieve this flexibility, and several neurophysiological experiments have revealed flexibility in tunings of sensorimotor neurons. We found a model, Locally Weighted Projection Regression (LWPR), which uniquely possesses the structure of a basis function network in which both the weights and tuning widths of the nodes are updated incrementally during adaptation. We presented this LWPR model with training functions of different spatial complexities and monitored incremental updates to receptive field widths. An inverse pattern of dependence of receptive field adaptation on experienced error became evident, underlying both a relationship between generalization and complexity, and a unique behavior in which generalization always narrows after a sudden switch in environmental complexity. These results implicate a model that is flexible in both basis function widths and weights, like LWPR, as a viable alternative model for human motor adaptation that can account for previously observed plasticity in spatial generalization. This theory can be tested by using the behaviors observed in our experiments as novel hypotheses in human studies. PMID:23888141

Measurement of resistant starch by enzymatic digestion in starch and selected plant materials: collaborative study.

PubMed

McCleary, Barry V; McNally, Marian; Rossiter, Patricia

2002-01-01

Interlaboratory performance statistics was determined for a method developed to measure the resistant starch (RS) content of selected plant food products and a range of commercial starch samples. Food materials examined contained RS (cooked kidney beans, green banana, and corn flakes) and commercial starches, most of which naturally contain, or were processed to yield, elevated RS levels. The method evaluated was optimized to yield RS values in agreement with those reported for in vivo studies. Thirty-seven laboratories tested 8 pairs of blind duplicate starch or plant material samples with RS values between 0.6 (regular maize starch) and 64% (fresh weight basis). For matrixes excluding regular maize starch, repeatability relative standard deviation (RSDr) values ranged from 1.97 to 4.2%, and reproducibility relative standard deviation (RSDR) values ranged from 4.58 to 10.9%. The range of applicability of the test is 2-64% RS. The method is not suitable for products with <1% RS (e.g., regular maize starch; 0.6% RS). For such products, RSDr and RSDR values are unacceptably high.

Magnetic particle-mediated magnetoreception

PubMed Central

Shaw, Jeremy; Boyd, Alastair; House, Michael; Woodward, Robert; Mathes, Falko; Cowin, Gary; Saunders, Martin; Baer, Boris

2015-01-01

Behavioural studies underpin the weight of experimental evidence for the existence of a magnetic sense in animals. In contrast, studies aimed at understanding the mechanistic basis of magnetoreception by determining the anatomical location, structure and function of sensory cells have been inconclusive. In this review, studies attempting to demonstrate the existence of a magnetoreceptor based on the principles of the magnetite hypothesis are examined. Specific attention is given to the range of techniques, and main animal model systems that have been used in the search for magnetite particulates. Anatomical location/cell rarity and composition are identified as two key obstacles that must be addressed in order to make progress in locating and characterizing a magnetite-based magnetoreceptor cell. Avenues for further study are suggested, including the need for novel experimental, correlative, multimodal and multidisciplinary approaches. The aim of this review is to inspire new efforts towards understanding the cellular basis of magnetoreception in animals, which will in turn inform a new era of behavioural research based on first principles. PMID:26333810

Microcystin in cyanobacterial blooms in a Chilean lake.

PubMed

Campos, V; Cantarero, S; Urrutia, H; Heinze, R; Wirsing, B; Neumann, U; Weckesser, J

1999-05-01

Cyanobacterial blooms dominated by Microcystis sp. occurred in lake Rocuant ("marisma", near Concepción/Chile) in February 1995 and 1996. In the bloom samples collected in both years the hepatotoxin microcystin was detected by RP-HPLC in both samples and in the sample of 1995 also by a toxicity assay using primary rat hepatocytes. In the bloom of 1995, the microcystin content of the dry bloom biomass was determined to be 130 micrograms/g on the basis of the RP-HPLC peak area and 800 micrograms/g on the basis of the rat hepatotoxicity assay, respectively. In the bloom of 1996, RP-HPLC analysis revealed a microcystin content of 8.13 micrograms/g bloom material dry weight. In this year no hepatotoxicity was measured using a concentration range up to 0.8 mg (d. w.) of bloom material per ml in the rat hepatotoxicity assay. This is the first report on the detection of microcystins in Chilean water bodies.

5 Ways to Promote a Positive Body Image for Kids

MedlinePlus

... Weight-related teasing is a major basis for bullying. Encourage your child’s school to address the issue. ... kids of every size. If your child is bullied about weight or for any other reason, act ...

Short residence time coal liquefaction process including catalytic hydrogenation

DOEpatents

Anderson, R.P.; Schmalzer, D.K.; Wright, C.H.

1982-05-18

Normally solid dissolved coal product and a distillate liquid product are produced by continuously passing a feed slurry comprising raw feed coal and a recycle solvent oil and/or slurry together with hydrogen to a preheating-reaction zone, the hydrogen pressure in the preheating-reaction zone being at least 1,500 psig (105 kg/cm[sup 2]), reacting the slurry in the preheating-reaction zone at a temperature in the range of between about 455 and about 500 C to dissolve the coal to form normally liquid coal and normally solid dissolved coal. A total slurry residence time is maintained in the reaction zone ranging from a finite value from about 0 to about 0.2 hour, and reaction effluent is continuously and directly contacted with a quenching fluid to substantially immediately reduce the temperature of the reaction effluent to below 425 C to substantially inhibit polymerization so that the yield of insoluble organic matter comprises less than 9 weight percent of said feed coal on a moisture-free basis. The reaction is performed under conditions of temperature, hydrogen pressure and residence time such that the quantity of distillate liquid boiling within the range C[sub 5]-454 C is an amount at least equal to that obtainable by performing the process under the same condition except for a longer total slurry residence time, e.g., 0.3 hour. Solvent boiling range liquid is separated from the reaction effluent and recycled as process solvent. The amount of solvent boiling range liquid is sufficient to provide at least 80 weight percent of that required to maintain the process in overall solvent balance. 6 figs.

Short residence time coal liquefaction process including catalytic hydrogenation

DOEpatents

Anderson, Raymond P.; Schmalzer, David K.; Wright, Charles H.

1982-05-18

Normally solid dissolved coal product and a distillate liquid product are produced by continuously passing a feed slurry comprising raw feed coal and a recycle solvent oil and/or slurry together with hydrogen to a preheating-reaction zone (26, alone, or 26 together with 42), the hydrogen pressure in the preheating-reaction zone being at least 1500 psig (105 kg/cm.sup.2), reacting the slurry in the preheating-reaction zone (26, or 26 with 42) at a temperature in the range of between about 455.degree. and about 500.degree. C. to dissolve the coal to form normally liquid coal and normally solid dissolved coal. A total slurry residence time is maintained in the reaction zone ranging from a finite value from about 0 to about 0.2 hour, and reaction effluent is continuously and directly contacted with a quenching fluid (40, 68) to substantially immediately reduce the temperature of the reaction effluent to below 425.degree. C. to substantially inhibit polymerization so that the yield of insoluble organic matter comprises less than 9 weight percent of said feed coal on a moisture-free basis. The reaction is performed under conditions of temperature, hydrogen pressure and residence time such that the quantity of distillate liquid boiling within the range C.sub.5 -454.degree. C. is an amount at least equal to that obtainable by performing the process under the same condition except for a longer total slurry residence time, e.g., 0.3 hour. Solvent boiling range liquid is separated from the reaction effluent (83) and recycled as process solvent (16). The amount of solvent boiling range liquid is sufficient to provide at least 80 weight percent of that required to maintain the process in overall solvent balance.

Clinical risk factors for weight gain during psychopharmacologic treatment of depression: results from 2 large German observational studies.

PubMed

Kloiber, Stefan; Domschke, Katharina; Ising, Marcus; Arolt, Volker; Baune, Bernhard T; Holsboer, Florian; Lucae, Susanne

2015-06-01

Weight gain during psychopharmacologic treatment has considerable impact on the clinical management of depression, treatment continuation, and risk for metabolic disorders. As no profound clinical risk factors have been identified so far, the aim of our analyses was to determine clinical risk factors associated with short-term weight development in 2 large observational psychopharmacologic treatment studies for major depression. Clinical variables at baseline (age, gender, depression psychopathology, anthropometry, disease history, and disease entity) were analyzed for association with percent change in body mass index (BMI; normal range, 18.5 to 25 kg/m(2)) during 5 weeks of naturalistic psychopharmacologic treatment in patients who had a depressive episode as single depressive episode, in the course of recurrent unipolar depression or bipolar disorder according to DSM-IV criteria. 703 patients participated in the Munich Antidepressant Response Signature (MARS) project, an ongoing study since 2002, and 214 patients participated in a study conducted at the University of Muenster from 2004 to 2006 in Germany. Lower BMI, weight-increasing side effects of medication, severity of depression, and psychotic symptoms could be identified as clinical risk factors associated with elevated weight gain during the initial treatment phase of 5 weeks in both studies. Based on these results, a composite risk score for weight gain consisting of BMI ≤ 25 kg/m(2), Hamilton Depression Rating Scale (17-item) score > 20, presence of psychotic symptoms, and administration of psychopharmacologic medication with potential weight-gaining side effects was highly discriminative for mean weight gain (F4,909 = 26.77, P = 5.14E-21) during short-term psychopharmacologic treatment. On the basis of our results, depressed patients with low to normal BMI, severe depression, or psychotic symptoms should be considered at higher risk for weight gain during acute antidepressant treatment. We introduce a new risk score that might be considered in psychopharmacologic decisions for the prevention of weight gain and resulting metabolic disorders. © Copyright 2015 Physicians Postgraduate Press, Inc.

Alternate Propulsion Subsystem Concepts Tripropellant Comparison Study

NASA Technical Reports Server (NTRS)

Levack, Daniel

1995-01-01

A study was conducted under MSFC contract NAS8-39210 to compare tripropellant and bipropellant engine configurations for the SSTO mission. The objective was to produce an 'apples-to-apples' comparison to isolate the effects of design implementation, designing company, year of design, or technologies included from the basic tripropellant/bipropellant comparison. Consequently, identical technologies were included (e.g., jet pumps) and the same design groundrules and practices were used. Engine power cycles were examined as were turbomachinery/preburner arrangements for each cycle. The bipropellant approach and two tripropellant approaches were separately optimized in terms of operating parameters: exit pressures, mixture ratios, thrust splits, etc. This briefing presents the results of the study including engine weights for both tripropellant and bipropellant engines; dry vehicle weight performance for a range of engine chamber pressures; discusses the basis for the results; examines vehicle performance due to engine cycles and the margin characteristics of various cycles; and identifies technologies with significant payoffs for this application.

Birth statistics for African (Loxodonta africana) and Asian (Elephas maximus) elephants in human care: history and implications for elephant welfare.

PubMed

Dale, Robert H I

2010-01-01

African (Loxodonta africana) and Asian elephants (Elephas maximus) have lived in the care of humans for many years, yet there is no consensus concerning some basic parameters describing their newborn calves. This study provides a broad empirical basis for generalizations about the birth heights, birth weights, birth times and gestation periods of elephant calves born in captivity. I obtained data concerning at least one of these four characteristics for 218 newborn calves from 74 institutions. Over the past 30 years, newborn Asian elephants have been taller and heavier than newborn African elephants. Neonatal African elephants exhibited sex differences in both weight and height, whereas neonatal Asian elephants have exhibited sex differences only in height. Primiparous dams ex situ are at least as old as their in situ counterparts, whereas ex situ sires appear to be younger than sires in range countries. Confirming earlier anecdotal evidence, both African [N=47] and Asian [N=91] dams gave birth most often at night.

Probability genotype imputation method and integrated weighted lasso for QTL identification.

PubMed

Demetrashvili, Nino; Van den Heuvel, Edwin R; Wit, Ernst C

2013-12-30

Many QTL studies have two common features: (1) often there is missing marker information, (2) among many markers involved in the biological process only a few are causal. In statistics, the second issue falls under the headings "sparsity" and "causal inference". The goal of this work is to develop a two-step statistical methodology for QTL mapping for markers with binary genotypes. The first step introduces a novel imputation method for missing genotypes. Outcomes of the proposed imputation method are probabilities which serve as weights to the second step, namely in weighted lasso. The sparse phenotype inference is employed to select a set of predictive markers for the trait of interest. Simulation studies validate the proposed methodology under a wide range of realistic settings. Furthermore, the methodology outperforms alternative imputation and variable selection methods in such studies. The methodology was applied to an Arabidopsis experiment, containing 69 markers for 165 recombinant inbred lines of a F8 generation. The results confirm previously identified regions, however several new markers are also found. On the basis of the inferred ROC behavior these markers show good potential for being real, especially for the germination trait Gmax. Our imputation method shows higher accuracy in terms of sensitivity and specificity compared to alternative imputation method. Also, the proposed weighted lasso outperforms commonly practiced multiple regression as well as the traditional lasso and adaptive lasso with three weighting schemes. This means that under realistic missing data settings this methodology can be used for QTL identification.

Application of a computer model to predict optimum slaughter end points for different biological types of feeder cattle.

PubMed

Williams, C B; Bennett, G L

1995-10-01

A bioeconomic model was developed to predict slaughter end points of different genotypes of feeder cattle, where profit/rotation and profit/day were maximized. Growth, feed intake, and carcass weight and composition were simulated for 17 biological types of steers. Distribution of carcass weight and proportion in four USDA quality and five USDA yield grades were obtained from predicted carcass weights and composition. Average carcass value for each genotype was calculated from these distributions under four carcass pricing systems that varied from value determined on quality grade alone to value determined on yield grade alone. Under profitable market conditions, rotation length was shorter and carcass weights lighter when the producer's goal was maximum profit/day, compared with maximum profit/rotation. A carcass value system based on yield grade alone resulted in greater profit/rotation and in lighter and leaner carcasses than a system based on quality grade alone. High correlations ( > .97) were obtained between breed profits obtained with different sets of input/output prices and carcass price discount weight ranges. This suggests that breed rankings on the basis of breed profits may not be sensitive to changes in input/output market prices. Steers that were on a grower-stocker system had leaner carcasses, heavier optimum carcass weight, greater profits, and less variation in optimum carcass weights between genotypes than steers that were started on a high-energy finishing diet at weaning. Overall results suggest that breed choices may change with different carcass grading and value systems and postweaning production systems. This model has potential to provide decision support in marketing fed cattle.

Brain lesions in mallard ducklings from parents fed methylmercury

USGS Publications Warehouse

Heinz, G.H.; Locke, L.N.

1976-01-01

Methylmercury dicyandiamide was fed to mallard ducks at 3 ppm mercury. Mercury accumulated in the eggs to an average of 7.18 and 5.46 ppm on a wet-weight basis in 2 successive years. Mercury in the eggs is believed to have caused brain lesions in the hatched ducklings. Lesions included demyelination, neuron shrink-age, necrosis, and hemorrhage in the meninges overlying the cerebellum. Brains of dead ducklings contained an average of 6.17 and 5.19 ppm mercury on a wet-weight basis in 2 successive years.

Fatigue crack propagation behaviour of unidirectionally solidified gamma/gamma-prime-delta eutectic alloys. [Ni-Nb-Al alloys

NASA Technical Reports Server (NTRS)

Bretz, P. E.; Hertzberg, R. W.

1979-01-01

Fatigue crack propagation studies were carried out on unidirectionally solidified gamma/gamma-prime-delta (Ni-Nb-Al) alloys over an aluminum content range of 1.5-2.5% by weight. The variation of Al content of as-grown alloys did not significantly affect the crack growth behavior of these eutectic composites. The results indicate that the addition of Al to the eutectic dramatically improved the FCP behavior. The gamma/gamma-prime-delta alloy exhibited crack growth rates for a given stress intensity range that are an order of magnitude lower than those for the gamma-delta alloy. It is suggested that this difference in FCP behavior can be explained on the basis of stacking fault energy considerations. Extensive delaminations at the crack tip were also revealed, which contributed to the superior fatigue response. Delamination was predominantly intergranular in nature.

Levofloxacin Population Pharmacokinetics in South African Children Treated for Multidrug-Resistant Tuberculosis.

PubMed

Denti, Paolo; Garcia-Prats, Anthony J; Draper, Heather R; Wiesner, Lubbe; Winckler, Jana; Thee, Stephanie; Dooley, Kelly E; Savic, Rada M; McIlleron, Helen M; Schaaf, H Simon; Hesseling, Anneke C

2018-02-01

Levofloxacin is increasingly used in the treatment of multidrug-resistant tuberculosis (MDR-TB). There are limited pediatric pharmacokinetic data to inform dose selection for children. Children routinely receiving levofloxacin (250-mg adult tablets) for MDR-TB prophylaxis or disease in Cape Town, South Africa, underwent pharmacokinetic sampling following receipt of a dose of 15 or 20 mg/kg of body weight given as a whole or crushed tablet(s) orally or via a nasogastric tube. Pharmacokinetic parameters were estimated using nonlinear mixed-effects modeling. Model-based simulations were performed to estimate the doses across weight bands that would achieve adult exposures with 750-mg once-daily dosing. One hundred nine children were included. The median age was 2.1 years (range, 0.3 to 8.7 years), and the median weight was 12 kg (range, 6 to 22 kg). Levofloxacin followed 2-compartment kinetics with first-order elimination and absorption with a lag time. After inclusion of allometric scaling, the model characterized the age-driven maturation of clearance (CL), with the effect reaching 50% of that at maturity at about 2 months after birth and 100% of that at maturity by 2 years of age. CL in a typical child (weight, 12 kg; age, 2 years) was 4.7 liters/h. HIV infection reduced CL by 16%. By use of the adult 250-mg formulation, levofloxacin exposures were substantially lower than those reported in adults receiving a similar dose on a milligram-per-kilogram basis. To achieve adult-equivalent exposures at a 750-mg daily dose, higher levofloxacin pediatric doses of from 18 mg/kg/day for younger children with weights of 3 to 4 kg (due to immature clearance) to 40 mg/kg/day for older children may be required. The doses of levofloxacin currently recommended for the treatment of MDR-TB in children result in exposures considerably lower than those in adults. The effects of different formulations and formulation manipulation require further investigation. We recommend age- and weight-banded doses of 250-mg tablets of the adult formulation most likely to achieve target concentrations for prospective evaluation. Copyright © 2018 American Society for Microbiology.

Weight Measurements and Standards for Soldiers, Phase 2

DTIC Science & Technology

2015-10-01

H.E.A.L.T.H.) (1). This program was designed to address weight management needs and non -compliance with the Army Weight Control Program (AWCP) (2) and...basis (minority of users), versus registering on the program and never returning (majority of users). This is similar to other trials of this nature...in civilian technology programs for weight management. Also, enrollment and use in target groups (overweight) are more likely than non -target groups

Biosynthesis and characterization of polyhydroxyalkanoates copolymers produced by Pseudomonas putida Bet001 isolated from palm oil mill effluent.

PubMed

Gumel, Ahmad Mohammed; Annuar, Mohamad Suffian Mohamad; Heidelberg, Thorsten

2012-01-01

The biosynthesis and characterization of medium chain length poly-3-hydroxyalkanoates (mcl-PHA) produced by Pseudomonas putida Bet001 isolated from palm oil mill effluent was studied. The biosynthesis of mcl-PHA in this newly isolated microorganism follows a growth-associated trend. Mcl-PHA accumulation ranging from 49.7 to 68.9% on cell dry weight (CDW) basis were observed when fatty acids ranging from octanoic acid (C(8:0)) to oleic acid (C(18:1)) were used as sole carbon and energy source. Molecular weight of the polymer was found to be ranging from 55.7 to 77.7 kDa. Depending on the type of fatty acid used, the (1)H NMR and GCMSMS analyses of the chiral polymer showed a composition of even and odd carbon atom chain with monomer length of C4 to C14 with C8 and C10 as the principal monomers. No unsaturated monomer was detected. Thermo-chemical analyses showed the accumulated PHA to be semi-crystalline polymer with good thermal stability, having a thermal degradation temperature (T(d)) of 264.6 to 318.8 (± 0.2) (o)C, melting temperature (T(m)) of 43. (± 0.2) (o)C, glass transition temperature (T(g)) of -1.0 (± 0.2) (o)C and apparent melting enthalpy of fusion (ΔH(f)) of 100.9 (± 0.1) J g(-1).

Biosynthesis and Characterization of Polyhydroxyalkanoates Copolymers Produced by Pseudomonas putida Bet001 Isolated from Palm Oil Mill Effluent

PubMed Central

Gumel, Ahmad Mohammed; Annuar, Mohamad Suffian Mohamad; Heidelberg, Thorsten

2012-01-01

The biosynthesis and characterization of medium chain length poly-3-hydroxyalkanoates (mcl-PHA) produced by Pseudomonas putida Bet001 isolated from palm oil mill effluent was studied. The biosynthesis of mcl-PHA in this newly isolated microorganism follows a growth-associated trend. Mcl-PHA accumulation ranging from 49.7 to 68.9% on cell dry weight (CDW) basis were observed when fatty acids ranging from octanoic acid (C8∶0) to oleic acid (C18∶1) were used as sole carbon and energy source. Molecular weight of the polymer was found to be ranging from 55.7 to 77.7 kDa. Depending on the type of fatty acid used, the 1H NMR and GCMSMS analyses of the chiral polymer showed a composition of even and odd carbon atom chain with monomer length of C4 to C14 with C8 and C10 as the principal monomers. No unsaturated monomer was detected. Thermo-chemical analyses showed the accumulated PHA to be semi-crystalline polymer with good thermal stability, having a thermal degradation temperature (T d) of 264.6 to 318.8 (±0.2) oC, melting temperature (T m) of 43. (±0.2) oC, glass transition temperature (T g) of −1.0 (±0.2) oC and apparent melting enthalpy of fusion (ΔH f) of 100.9 (±0.1) J g−1. PMID:23028854

Estimating the possible range of recycling rates achieved by dump waste pickers: The case of Bantar Gebang in Indonesia.

PubMed

Sasaki, Shunsuke; Araki, Tetsuya

2014-06-01

This article presents informal recycling contributions made by scavengers in the surrounding area of Bantar Gebang final disposal site for municipal solid waste generated in Jakarta. Preliminary fieldwork was conducted through daily conversations with scavengers to identify recycling actors at the site, and then quantitative field surveys were conducted twice. The first survey (n = 504 households) covered 33% of all households in the area, and the second survey (n = 69 households) was conducted to quantify transactions of recyclables among scavengers. Mathematical equations were formulated with assumptions made to estimate the possible range of recycling rates achieved by dump waste pickers. Slightly over 60% of all respondents were involved in informal recycling and over 80% of heads of households were waste pickers, normally referred to as live-in waste pickers and live-out waste pickers at the site. The largest percentage of their spouses were family workers, followed by waste pickers and housewives. Over 95% of all households of respondents had at least one waste picker or one small boss who has a coequal status of a waste picker. Average weight of recyclables collected by waste pickers at the site was estimated to be approximately 100 kg day(-1) per household on the net weight basis. The recycling rate of solid wastes collected by all scavengers at the site was estimated to be in the range of 2.8-7.5% of all solid wastes transported to the site. © The Author(s) 2014.

The effectiveness of worksite nutrition and physical activity interventions for controlling employee overweight and obesity: a systematic review.

PubMed

Anderson, Laurie M; Quinn, Toby A; Glanz, Karen; Ramirez, Gilbert; Kahwati, Leila C; Johnson, Donna B; Buchanan, Leigh Ramsey; Archer, W Roodly; Chattopadhyay, Sajal; Kalra, Geetika P; Katz, David L

2009-10-01

This report presents the results of a systematic review of the effectiveness of worksite nutrition and physical activity programs to promote healthy weight among employees. These results form the basis for the recommendation by the Task Force on Community Preventive Services on the use of these interventions. Weight-related outcomes, including weight in pounds or kilograms, BMI, and percentage body fat were used to assess effectiveness of these programs. This review found that worksite nutrition and physical activity programs achieve modest improvements in employee weight status at the 6-12-month follow-up. A pooled effect estimate of -2.8 pounds (95% CI=-4.6, -1.0) was found based on nine RCTs, and a decrease in BMI of -0.5 (95% CI=-0.8, -0.2) was found based on six RCTs. The findings appear to be applicable to both male and female employees, across a range of worksite settings. Most of the studies combined informational and behavioral strategies to influence diet and physical activity; fewer studies modified the work environment (e.g., cafeteria, exercise facilities) to promote healthy choices. Information about other effects, barriers to implementation, cost and cost effectiveness of interventions, and research gaps are also presented in this article. The findings of this systematic review can help inform decisions of employers, planners, researchers, and other public health decision makers.

Essential elements, cadmium, and lead in raw and pasteurized cow and goat milk

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lopez, A.; Collins, W.F.; Williams, H.L.

1985-08-01

Fifteen essential elements plus cadmium and lead were determined in raw and pasteurized cow and goat milks by atomic absorption spectrophotometry. When results were compared on a wet weight basis, there were no significant differences between the raw and pasteurized milks except for cobalt, iron, and lead in goat milk. When copper in goat milk was expressed on a dry weight basis, there was a significant difference between raw and pasteurized milk. There were significantly higher amounts of cobalt, copper, iron, lead, magnesium, and phosphorus, wet weight basis, in pasteurized goat milk than in pasteurized cow milk. Significantly more nickelmore » and sodium were in pasteurized cow milk. No difference in the content of chloride, calcium, potassium, and zinc was significant between the two milks. When dry weights of the two milks were compared, statistical differences were the same, except there was significantly more calcium and potassium in pasteurized cow milk than in pasteurized goat milk and there were no significant differences in the content of lead and phosphorus between the two milks. Percentages of the established and estimated recommended daily allowances show both cow and goat milk to be excellent sources of calcium, phosphorus, and potassium and fair sources of iron, magnesium, and sodium.« less

40 CFR 761.274 - Reporting PCB concentrations in samples.

Code of Federal Regulations, 2014 CFR

2014-07-01

... concentrations for non-liquid PCBs on a dry weight basis as micrograms of PCBs per gram of sample (ppm by weight... quotient by the total number of micrograms of PCBs on the surface to obtain the equivalent measurement of...

40 CFR 761.274 - Reporting PCB concentrations in samples.

Code of Federal Regulations, 2011 CFR

2011-07-01

... concentrations for non-liquid PCBs on a dry weight basis as micrograms of PCBs per gram of sample (ppm by weight... quotient by the total number of micrograms of PCBs on the surface to obtain the equivalent measurement of...

40 CFR 761.274 - Reporting PCB concentrations in samples.

Code of Federal Regulations, 2012 CFR

2012-07-01

... concentrations for non-liquid PCBs on a dry weight basis as micrograms of PCBs per gram of sample (ppm by weight... quotient by the total number of micrograms of PCBs on the surface to obtain the equivalent measurement of...

Heterotrophic growth and lipid accumulation of Chlorella protothecoides in whey permeate, a dairy by-product stream, for biofuel production.

PubMed

Espinosa-Gonzalez, Isabel; Parashar, Archana; Bressler, David C

2014-03-01

This study proposes a novel alternative for the utilization of whey permeate, a by-product stream from the dairy industry, as the feedstock for the biomass and lipid production of the microalgae Chlorella protothecoides. Glucose and galactose from the pre-hydrolyzed whey permeate were used as main carbon sources in a base mineral media for establishing batch and fed batch cultures. Batch cultures reached a biomass production of 9.1±0.2g/L with a total lipid accumulation of 42.0±6.6% (dry weight basis), while in the fed batch cultures 17.2±1.3g/L of biomass with 20.5±0.3% lipid accumulation (dry weight basis) were obtained. A third strategy for the direct utilization of whey permeate was investigated by simultaneous saccharification and fermentation (SSF), wherein, 7.3±1.3g/L of biomass with 49.9±3.3% lipid accumulation (dry weight basis) was obtained in batch mode using immobilized enzyme. Copyright © 2013 Elsevier Ltd. All rights reserved.

40 CFR Table 3 to Subpart Dddd of... - Work Practice Requirements

Code of Federal Regulations, 2013 CFR

2013-07-01

... with a 24-hour block average inlet moisture content of less than or equal to 30 percent (by weight, dry... average inlet moisture content of the veneer is less than or equal to 25 percent (by weight, dry basis...

Fermionic Approach to Weighted Hurwitz Numbers and Topological Recursion

NASA Astrophysics Data System (ADS)

Alexandrov, A.; Chapuy, G.; Eynard, B.; Harnad, J.

2017-12-01

A fermionic representation is given for all the quantities entering in the generating function approach to weighted Hurwitz numbers and topological recursion. This includes: KP and 2D Toda {τ} -functions of hypergeometric type, which serve as generating functions for weighted single and double Hurwitz numbers; the Baker function, which is expanded in an adapted basis obtained by applying the same dressing transformation to all vacuum basis elements; the multipair correlators and the multicurrent correlators. Multiplicative recursion relations and a linear differential system are deduced for the adapted bases and their duals, and a Christoffel-Darboux type formula is derived for the pair correlator. The quantum and classical spectral curves linking this theory with the topological recursion program are derived, as well as the generalized cut-and-join equations. The results are detailed for four special cases: the simple single and double Hurwitz numbers, the weakly monotone case, corresponding to signed enumeration of coverings, the strongly monotone case, corresponding to Belyi curves and the simplest version of quantum weighted Hurwitz numbers.

Fermionic Approach to Weighted Hurwitz Numbers and Topological Recursion

NASA Astrophysics Data System (ADS)

Alexandrov, A.; Chapuy, G.; Eynard, B.; Harnad, J.

2018-06-01

A fermionic representation is given for all the quantities entering in the generating function approach to weighted Hurwitz numbers and topological recursion. This includes: KP and 2 D Toda {τ} -functions of hypergeometric type, which serve as generating functions for weighted single and double Hurwitz numbers; the Baker function, which is expanded in an adapted basis obtained by applying the same dressing transformation to all vacuum basis elements; the multipair correlators and the multicurrent correlators. Multiplicative recursion relations and a linear differential system are deduced for the adapted bases and their duals, and a Christoffel-Darboux type formula is derived for the pair correlator. The quantum and classical spectral curves linking this theory with the topological recursion program are derived, as well as the generalized cut-and-join equations. The results are detailed for four special cases: the simple single and double Hurwitz numbers, the weakly monotone case, corresponding to signed enumeration of coverings, the strongly monotone case, corresponding to Belyi curves and the simplest version of quantum weighted Hurwitz numbers.

Technical Note: Relation between dual-energy subtraction of CT images for electron density calibration and virtual monochromatic imaging.

PubMed

Saito, Masatoshi

2015-07-01

For accurate tissue inhomogeneity correction in radiotherapy treatment planning, the author previously proposed a simple conversion of the energy-subtracted computed tomography (CT) number to an electron density (ΔHU-ρe conversion), which provides a single linear relationship between ΔHU and ρe over a wide ρe range. The purpose of the present study was to reveal the relation between the ΔHU image for ρe calibration and a virtually monochromatic CT image by performing numerical analyses based on the basis material decomposition in dual-energy CT. The author determined the weighting factor, α0, of the ΔHU-ρe conversion through numerical analyses of the International Commission on Radiation Units and Measurements Report-46 human body tissues using their attenuation coefficients and given ρe values. Another weighting factor, α(E), for synthesizing a virtual monochromatic CT image from high- and low-kV CT images, was also calculated in the energy range of 0.03 < E < 5 MeV, assuming that cortical bone and water were the basis materials. The mass attenuation coefficients for these materials were obtained using the xcom photon cross sections database. The effective x-ray energies used to calculate the attenuation were chosen to imitate a dual-source CT scanner operated at 80-140 and 100-140 kV/Sn. The determined α0 values were 0.455 for 80-140 kV/Sn and 0.743 for 100-140 kV/Sn. These values coincided almost perfectly with the respective maximal points of the calculated α(E) curves located at approximately 1 MeV, in which the photon-matter interaction in human body tissues is exclusively the incoherent (Compton) scattering. The ΔHU image could be regarded substantially as a CT image acquired with monoenergetic 1-MeV photons, which provides a linear relationship between CT numbers and electron densities.

Living donor right liver lobes: preoperative CT volumetric measurement for calculation of intraoperative weight and volume.

PubMed

Lemke, Arne-Jörn; Brinkmann, Martin Julius; Schott, Thomas; Niehues, Stefan Markus; Settmacher, Utz; Neuhaus, Peter; Felix, Roland

2006-09-01

To prospectively develop equations for the calculation of expected intraoperative weight and volume of a living donor's right liver lobe by using preoperative computed tomography (CT) for volumetric measurement. After medical ethics committee and state medical board approval, informed consent was obtained from eight female and eight male living donors (age range, 18-63 years) for participation in preoperative CT volumetric measurement of the right liver lobes by using the summation-of-area method. Intraoperatively, the graft was weighed, and the volume of the graft was determined by means of water displacement. Distributions of pre- and intraoperative data were depicted as Tukey box-and-whisker diagrams. Then, linear regressions were calculated, and the results were depicted as scatterplots. On the basis of intraoperative data, physical density of the parenchyma was calculated by dividing weight by volume of the graft. Preoperative measurement of grafts resulted in a mean volume of 929 mL +/- 176 (standard deviation); intraoperative mean weight and volume of the grafts were 774 g +/- 138 and 697 mL +/- 139, respectively. All corresponding pre- and intraoperative data correlated significantly (P < .001) with each other. Intraoperatively expected volume (V(intraop)) in millilliters and weight (W(intraop)) in grams can be calculated with the equations V(intra)(op) = (0.656 . V(preop)) + 87.629 mL and W(intra)(op) = (0.678 g/mL . V(preop)) + 143.704 g, respectively, where preoperative volume is V(preop) in milliliters. Physical density of transplanted liver lobes was 1.1172 g/mL +/- 0.1015. By using two equations developed from the data obtained in this study, expected intraoperative weight and volume can properly be determined from CT volumetric measurements. (c) RSNA, 2006.

Carcass conformation and cut composition of Creole goat from Guadeloupe.

PubMed

Liméa, Léticia; Bocage, Bruno; Arquet, Rémy; Mahieu, Maurice; Alexandre, Gisele

2010-03-01

Carcass data base of 164 Creole male goats was used in order to provide factual data on the carcass conformation. Standardised procedures of carcass measuring and cutting were followed. The European official grid of light lamb is implemented for meat goat in the French West Indies and included five levels. Weights of carcass, cuts and tissues, quality scores and linear measurements were analysed. Feeding system, age at slaughter and weight were taken into account for statistical analysis. There were significant differences among carcass conformation classes (CC) for many traits except for the fat score, leg length and compactness ratio (carcass width on length): 2.2, 34.5 cm and 0.30 on average, respectively. The values of chilled carcass weight and yield and the carcass linear measurements steadily increased until conformation class 4 or 5: 6.7 to 11.2 kg, 49% to 55% and 52.4 to 58.0 cm carcass length. For the weights of carcass cuts, significant differences appeared between two groups: classes 1 and 2 vs. classes 3, 4 and 5. Regardless of the carcass weight, the distribution of prime cuts remained similar. The indices calculated on a weight basis (kg/cm), either for the carcass or the leg, increased significantly (P<0.01): with 54% and 63% difference between the two extreme classes, respectively. The muscle, bone and fat proportions in the shoulder did not vary between CC with 0.72, 0.22 and 0.06, respectively. Corresponding traits in leg were 0.74, 0.23 and 0.03; the last two were different (P<0.05) from class 1 to class 5. The muscle/bone ratios calculated either in shoulder or in leg ranged from 3.1 to 3.6 (P>0.05).

Polybenzoxazole-filled nitrile butadiene rubber compositions

NASA Technical Reports Server (NTRS)

Gajiwala, Himansu M. (Inventor); Guillot, David G. (Inventor)

2008-01-01

An insulation composition that comprises at least one nitrile butadiene rubber (NBR) having an acrylonitrile content that ranges from approximately 26% by weight to approximately 35% by weight and polybenzoxazole (PBO) fibers. The NBR may be a copolymer of acrylonitrile and butadiene and may be present in the insulation composition in a range of from approximately 45% by weight to approximately 56% by weight of a total weight of the insulation composition. The PBO fibers may be present in a range of from approximately 3% by weight to approximately 10% by weight of a total weight of the insulation composition. A rocket motor including the insulation composition and a method of insulating a rocket motor are also disclosed.

Computational and Mathematical Modeling of Coupled Superconducting Quantum Interference Devices

NASA Astrophysics Data System (ADS)

Berggren, Susan Anne Elizabeth

This research focuses on conducting an extensive computational investigation and mathematical analysis into the average voltage response of arrays of Superconducting Quantum Interference Devices (SQUIDs). These arrays will serve as the basis for the development of a sensitive, low noise, significantly lower Size, Weight and Power (SWaP) antenna integrated with Low-Noise Amplifier (LNA) using the SQUID technology. The goal for this antenna is to be capable of meeting all requirements for Guided Missile Destroyers (DDG) 1000 class ships for Information Operations/Signals Intelligence (IO/SIGINT) applications in Very High Frequency/Ultra High Frequency (V/UHF) bands. The device will increase the listening capability of receivers by moving technology into a new regime of energy detection allowing wider band, smaller size, more sensitive, stealthier systems. The smaller size and greater sensitivity will allow for ships to be “de-cluttered” of their current large dishes and devices, replacing everything with fewer and smaller SQUID antenna devices. The fewer devices present on the deck of a ship, the more invisible the ship will be to enemy forces. We invent new arrays of SQUIDs, optimized for signal detection with very high dynamic range and excellent spur-free dynamic range, while maintaining extreme small size (and low radar cross section), wide bandwidth, and environmentally noise limited sensitivity, effectively shifting the bottle neck of receiver systems forever away from the antenna itself deeper into the receiver chain. To accomplish these goals we develop and validate mathematical models for different designs of SQUID arrays and use them to invent a new device and systems design. This design is capable of significantly exceeding, per size weight and power, state-of-the-art receiver system measures of performance, such as bandwidth, sensitivity, dynamic range, and spurious-free dynamic range.

The concentration and distribution of 2,3,7,8-dibenzo-p-dioxins/-furans in chickens

NASA Technical Reports Server (NTRS)

Ferrario, J.; Byrne, C.

2000-01-01

The concentrations of the 2,3,7,8-Cl substituted dibenzo-p-dioxins/-furans (PCDDs/PCDFs) were determined in the edible tissues of whole chicken fryers and compared with the values found in their abdominal fat. The values are presented both on a whole weight basis and on a lipid adjusted basis for each tissue. While there is a marked difference in the concentration of the 2,3,7,8-dibenzo-p-dioxins in the edible tissues expressed on a whole weight basis, the lipid-adjusted concentrations of the individual dioxins were not statistically different in the various tissues. This validates the use of lipid adjusted concentrations of 2,3,7,8-PCDDs/PCDFs in abdominal fat for the determination of the presence of these compounds in different tissues.

Should efforts in favor of medical student diversity be focused during admissions or farther upstream?

PubMed

Reiter, Harold I; Lockyer, Jocelyn; Ziola, Barry; Courneya, Carol-Ann; Eva, Kevin

2012-04-01

Traditional medical school admissions assessment tools may be limiting diversity. This study investigates whether the Multiple Mini-Interview (MMI) is diversity-neutral and, if so, whether applying it with greater weight would dilute the anticipated negative impact of diversity-limiting admissions measures. Interviewed applicants to six medical schools in 2008 and 2009 underwent MMI. Predictor variables of MMI scores, grade point average (GPA), and Medical College Admission Test (MCAT) scores were correlated with diversity measures of age, gender, size of community of origin, income level, and self-declared aboriginal status. A subset of the data was then combined with variable weight assigned to predictor variables to determine whether weighting during the applicant selection process would affect diversity among chosen applicants. MMI scores were unrelated to gender, size of community of origin, and income level. They correlated positively with age and negatively with aboriginal status. GPA and MCAT correlated negatively with age and aboriginal status, GPA correlated positively with income level, and MCAT correlated positively with size of community of origin. Even extreme combinations of MMI and GPA weightings failed to increase diversity among applicants who would be selected on the basis of weighted criteria. MMI could not neutralize the diversity-limiting properties of academic scores as selection criteria to interview. Using academic scores in this way causes range restriction, counteracting attempts to enhance diversity using downstream admissions selection measures such as MMI. Diversity efforts should instead be focused upstream. These results lend further support for the development of pipeline programs.

Assessment of Interradiologist Agreement Regarding Mammographic Breast Density Classification Using the Fifth Edition of the BI-RADS Atlas.

PubMed

Ekpo, Ernest U; Ujong, Ujong Peter; Mello-Thoms, Claudia; McEntee, Mark F

2016-05-01

The objective of the present study was to assess interradiologist agreement regarding mammographic breast density assessment performed using the rating scale outlined in the fifth edition of the BI-RADS atlas of the American College of Radiology. Breast density assessments of 1000 cases were conducted by five radiologists from the same institution who together had recently undergone retraining in mammographic breast density classification based on the fifth edition of BI-RADS. The readers assigned breast density grades (A-D) on the basis of the BI-RADS classification scheme. Repeat assessment of 100 cases was performed by all readers 1 month after the initial assessment. A weighted kappa was used to calculate intrareader and interreader agreement. Intrareader agreement ranged from a kappa value of 0.86 (95% CI, 0.77-0.93) to 0.89 (95% CI, 0.81-0.95) on a four-category scale (categories A-D) and from 0.89 (95% CI, 0.86-0.92) to 0.94 (95% CI, 0.89-0.97) on a two-category scale (category A-B vs category C-D). Interreader agreement ranged from substantial (κ = 0.76; 95% CI, 0.73-0.78) to almost perfect (κ = 0.87; 95% CI, 0.86-0.89) on a four-category scale, and the overall weighted kappa value was substantial (0.79; 95% CI, 0.78-0.83). Interreader agreement on a two-category scale ranged from a kappa value of 0.85 (95% CI, 0.83-0.86) to 0.91 (95% CI, 0.90-0.92), and the overall weighted kappa was 0.88 (95% CI, 0.87-0.89). Overall, with regard to mammographic breast density classification, radiologists had substantial interreader agreement when a four-category scale was used and almost perfect interreader agreement when a dichotomous scale was used.

Random regression analyses using B-splines to model growth of Australian Angus cattle

PubMed Central

Meyer, Karin

2005-01-01

Regression on the basis function of B-splines has been advocated as an alternative to orthogonal polynomials in random regression analyses. Basic theory of splines in mixed model analyses is reviewed, and estimates from analyses of weights of Australian Angus cattle from birth to 820 days of age are presented. Data comprised 84 533 records on 20 731 animals in 43 herds, with a high proportion of animals with 4 or more weights recorded. Changes in weights with age were modelled through B-splines of age at recording. A total of thirteen analyses, considering different combinations of linear, quadratic and cubic B-splines and up to six knots, were carried out. Results showed good agreement for all ages with many records, but fluctuated where data were sparse. On the whole, analyses using B-splines appeared more robust against "end-of-range" problems and yielded more consistent and accurate estimates of the first eigenfunctions than previous, polynomial analyses. A model fitting quadratic B-splines, with knots at 0, 200, 400, 600 and 821 days and a total of 91 covariance components, appeared to be a good compromise between detailedness of the model, number of parameters to be estimated, plausibility of results, and fit, measured as residual mean square error. PMID:16093011

Energy potential of leafy spurge (Euphorbia esula)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maxwell, B.D.; Wiatr, S.M.; Fay, P.K.

1985-01-01

Leafy spurge (Euphorbia esula) is a noxious, perennial weed that infests pastures, range land and waste areas in the northern Great Plains. The objective of this study was to determine the productive potential of this species when grown under optimum agronomic conditions. Plants were fertilized and irrigated. Oil, hydrocarbon, total protein, and dry-weight production were measured on 3 harvest dates. Calorimetric analyses were performed to determine the potential of leafy spurge as a fuel crop. The hydrocarbon content of 12 strains of leafy spurge was determined to measure genetic variability for this trait. The addition of fertilizer doubled dry-weight productionmore » but did not affect percent oil or hydrocarbon content. Oil and hydrocarbon production averaged 6.8 and 0.6% on a plant dry-weight basis. Maximum production of plant biomass, protein, and hydrocarbon was obtained from a mid-July harvest. Oil content increased later in the growing season. The total protein content of leafy spurge averaged 12%. Whole-plant biomass had a caloric value of 4407 cal/g while the oils contained 10,019 cal/g. Leafy spurge hay can produce 4 times more energy per year than wheat straw; therefore, the immediate potential of leafy spurge whole-plant biomass as a locally grown fuel crop for home-heating purposes is suggested.« less

The effect of inulin and fructo-oligosaccharide supplementation on the textural, rheological and sensory properties of bread and their role in weight management: a review.

PubMed

Morris, Cécile; Morris, Gordon A

2012-07-15

There is evidence that fructo-oligosaccharides (FOS) and inulin can impart a range of health benefits if consumed on a regular basis. The health benefits include increased mineral absorption and improved immune response and while there is mounting evidence that prebiotics play a role in colorectal cancer prevention, their role of satiety and weight management is still being investigated. In this review we look at the evidence published so far on FOS or inulin supplementation and weight management. We also establish whether prebiotic enriched breads are feasible in terms of dough machinability, bread characteristics and consumers acceptance. Addition of inulin to bread generally resulted in smaller loaves with a harder crumb and darker colour. The limited sensory studies on those products reflect those findings and acceptability decreased with inulin content. However, a fortification of 5% seems achievable. Despite evidence that yeast invertase and dry heat degrade inulin, the extent to which this is the case and whether the prebiotics maintain their activity is not known. There is still a great deal of work to be done to establish whether a bread prepared with enough inulin to retain a significant activity can be manufactured without compromising consumer acceptance. Copyright © 2012 Elsevier Ltd. All rights reserved.

Poor oral hygiene and gingivitis are associated with obesity and overweight status in paediatric subjects.

PubMed

Franchini, Roberto; Petri, Antonella; Migliario, Mario; Rimondini, Lia

2011-11-01

The association between obesity and periodontitis has been extensively investigated in adults but not in young people. Our aim is to evaluate whether overweight/obese paediatric patients have a greater chance of being affected by gingivitis than those of normal weight. Ninety-eight subjects ranging between 10 and 17 years of age were classified as obese/overweight or normal weight on the basis of body mass index. Auxological data, blood pressure, insulin resistance, psychological profile, oral hygiene habits, plaque and gingival indices were collected. Anthropometric measurements and blood pressure were significantly higher in overweight/obese subjects than in the normal-weight subjects (p<0001). The overweight/obese subjects showed a worse attitude towards oral hygiene. Two-way anova revealed a significant effect of obesity status (p<0001) on the gingival index. Logistic and linear regression analyses identified gingivitis as dependent on insulin resistance and bad oral hygiene rather than on the overweight/obese status simply defined. Negative psychological features related to physical and academic self-concept were also risk factors for gingivitis probably because they were related to a generic poor self-awareness. The gingivitis observed in overweight and obese young subjects is probably due to a combination of metabolic and inflammatory profiles and neglected attitude towards oral hygiene. © 2011 John Wiley & Sons A/S.

Production stability of active polysaccharides of Dendrobium huoshanense using long-term cultures of protocorm-like bodies.

PubMed

Zha, Xue-Qiang; Luo, Jian-Ping

2008-01-01

In this study, the production stability of active polysaccharides in protocorm-like bodies (PLBs) induced from the seedling segments of Dendrobium huoshanense C. Z. Tang et S. J. Cheng was investigated during long-term subculture. Subcultures were conducted once every 30 days. With an average inoculum of 39 g/L fresh PLBs, the increase in biomass ranged from 95.7 g/L to 103.9 g/L in fresh weight and 3.2 g/L to 3.4 g/L in dry weight during eighteen continuous subcultures while polysaccharide content in PLBs was from 0.8 mg/g Fw (mg polysaccharide per gram PLBs in fresh weight) to 1.0 mg/g Fw. In addition, polysaccharides from all cultures showed a similar potential of stimulating interferon gamma (IFN-gamma) release in the supernatant of splenocytes and tumor necrosis factor alpha (TNF-alpha) release in the supernatant of peritoneal macrophages. To elucidate the genetic basis of polysaccharide production stability in long-term subculture of PLBs, the genetic fingerprints by RAPD were further analyzed using plantlets from PLB development. Results showed that there is no evidence of genetic variation both within the plantlets from the different subcultures of PLBs and between long-term subcultures and the donor plants.

Relationship between moisture content and electrical impedance of carrot slices during drying

NASA Astrophysics Data System (ADS)

Kertész, Ákos; Hlaváčová, Zuzana; Vozáry, Eszter; Staroňová, Lenka

2015-01-01

Electrical properties of food materials can give information about the inner structure and physiological state of biological tissues. Generally, the process of drying of fruits and vegetables is followed by weight loss. The aim of this study was to measure the impedance spectra of carrot slices during drying and to correlate impedance parameters to moisture content in different drying periods. Cylindrical slices were cut out from the carrot root along the axis. The slices were dried in a Venticell 111 air oven at 50°C. The weight of the slices was measured with a Denver SI-603 electronic analytical and precision balance. The weighing of the samples was performed every 30 min at the beginning of drying and every 60 min after the process. The moisture content of the samples was calculated on wet basis. The magnitude and phase angle of electrical impedance of the slices were measured with HP 4284A and 4285A precision LCR meters in the frequency range from 30 Hz to 1 MHz and from 75 kHz to 30 MHz, respectively, at voltage 1 V. The impedance measurement was performed after weighting. The change in the magnitude of impedance during drying showed a good correlation with the change in the moisture content.

Canine recommended breed weight ranges are not a good predictor of an ideal body condition score.

PubMed

Smith, E G; Davis, K; Sulsh, L; Harvey, S C; Fowler, K E

2018-05-08

Breed-specific ideal bodyweight range information is widely used by dog owners and breeders as a guideline to ensure animals are within a healthy weight range. Body Condition Scoring, a method used by veterinarians to assess an animal's overall shape with regard to weight is considered to be an excellent method to determine an animal's overall body condition; these values, however, do not always correspond to published weight ranges. Here, the weight, neuter status, age and a nine-point Body Condition Score of a population of 140 purebred dogs were recorded and subsequently analysed to determine whether bodyweight was an effective predictor for Body Condition Scores. This comparison indicated that published recommended, breed-specific body weight ranges are not a good predictor for an ideal BCS and as such, guidelines for owners and breeders need to be systematically reviewed. © 2018 Blackwell Verlag GmbH.

40 CFR 60.54a - Standard for municipal waste combustor acid gases.

Code of Federal Regulations, 2010 CFR

2010-07-01

... for Municipal Waste Combustors for Which Construction is Commenced After December 20, 1989 and on or... weight or volume) or 30 parts per million by volume, corrected to 7 percent oxygen (dry basis), whichever... by volume, corrected to 7 percent oxygen (dry basis), whichever is less stringent. ...

Ketogenic Diet for Obesity: Friend or Foe?

PubMed Central

Paoli, Antonio

2014-01-01

Obesity is reaching epidemic proportions and is a strong risk factor for a number of cardiovascular and metabolic disorders such as hypertension, type 2 diabetes, dyslipidemia, atherosclerosis, and also certain types of cancers. Despite the constant recommendations of health care organizations regarding the importance of weight control, this goal often fails. Genetic predisposition in combination with inactive lifestyles and high caloric intake leads to excessive weight gain. Even though there may be agreement about the concept that lifestyle changes affecting dietary habits and physical activity are essential to promote weight loss and weight control, the ideal amount and type of exercise and also the ideal diet are still under debate. For many years, nutritional intervention studies have been focused on reducing dietary fat with little positive results over the long-term. One of the most studied strategies in the recent years for weight loss is the ketogenic diet. Many studies have shown that this kind of nutritional approach has a solid physiological and biochemical basis and is able to induce effective weight loss along with improvement in several cardiovascular risk parameters. This review discusses the physiological basis of ketogenic diets and the rationale for their use in obesity, discussing the strengths and the weaknesses of these diets together with cautions that should be used in obese patients. PMID:24557522

Correlations for CO{sub 2} production from combustion of Turkish coal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oezdogan, S.

1996-12-31

Carbon dioxide is identified as the major contributor to greenhouse gas emissions. About 75% of the anthropogenic CO{sub 2} emissions are due to energy use, and primarily due to fossil-fuel combustion. Future patterns of energy use will dominate the global climate change. Within this frame, comparative evaluation of various carbon-based primary energy sources and related utilization options is of utmost importance. The amount of CO{sub 2} emission per unit energy production is considered as the mutual basis of evaluation among the fuel options. In this study, 39 Turkish coals were selected to represent the broad spectrum of Turkish coal characteristics.more » The lower heating values of the samples range from 6.8 to 30.6 MJ/kg on the as-received basis. The corresponding higher heating value range is 8.2 to 31.6 MJ/kg. The volatile matter to fixed carbon ratios of the selected coals change between 0.520 and 2.05 whereas the C to H weight ratios of dry coals cover a range from 16.4 to 9.8. The exact amount of CO{sub 2} emission per unit heating value is calculated from experimental data. The analysis of the results indicates that linear correlations exist between CO{sub 2} emissions per unit amount lower or higher heating value and the inverse of heating values. The calculated standard errors of estimate are within acceptable limits. The average and maximum errors are 3% and 11%, respectively. The developed formulas are applied to different ranks of coal from Turkey and abroad and results are interpreted.« less

Weight propagation and equivalent horsepower for alternate-engined cars

NASA Technical Reports Server (NTRS)

Klose, G. J.; Kurtz, D. W.

1978-01-01

In order to evaluate properly the consequences of replacing conventional Otto-cycle engines with alternate power systems, comparisons must be carried out at the vehicle level with functionally equivalent cars. This paper presents the development and application of a procedure for establishing equivalent vehicles. A systematic weight propagation methodology, based on detailed weight breakdowns and influence factors, yields the vehicle weight impacts due to changes in engine weight and power. Performance-matching criteria, utilizing a vehicle simulation program, are then employed to establish Otto-engine-equivalent vehicles, whose characteristics can form the basis for alternative engine evaluations.

Increasing scientific confidence in adverse outcome pathways: Application of tailored Bradford-Hill considerations for evaluating weight of evidence

EPA Science Inventory

Systematic consideration of scientific support is a critical element in developing and, ultimately, using adverse outcome pathways (AOPs) for various regulatory applications. Though weight of evidence (WoE) analysis has been proposed as a basis for assessment of the maturity and...

40 CFR 761.274 - Reporting PCB concentrations in samples.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) TOXIC SUBSTANCES CONTROL ACT POLYCHLORINATED BIPHENYLS (PCBs) MANUFACTURING, PROCESSING, DISTRIBUTION IN... concentrations for non-liquid PCBs on a dry weight basis as micrograms of PCBs per gram of sample (ppm by weight... quotient by the total number of micrograms of PCBs on the surface to obtain the equivalent measurement of...

40 CFR 761.274 - Reporting PCB concentrations in samples.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) TOXIC SUBSTANCES CONTROL ACT POLYCHLORINATED BIPHENYLS (PCBs) MANUFACTURING, PROCESSING, DISTRIBUTION IN... concentrations for non-liquid PCBs on a dry weight basis as micrograms of PCBs per gram of sample (ppm by weight... quotient by the total number of micrograms of PCBs on the surface to obtain the equivalent measurement of...

Individualized correction for maternal weight in calculating the risk of chromosomal abnormalities with first-trimester screening data.

PubMed

Merz, E; Thode, C; Eiben, B; Faber, R; Hackelöer, B J; Huesgen, G; Pruggmaier, M; Wellek, S

2011-02-01

In the algorithm developed by the Fetal Medicine Foundation (FMF) Germany designed to evaluate the findings of routine first-trimester screening, the false-positive rate (FPR) was determined for the entire study group without stratification by maternal weight. Based on the data received from the continuous audit we were able to identify an increase in the FPR for the weight-related subgroups of patients, particularly for patients with extremely high body weights. The aim of this study was to demonstrate that the variability of the FPR can be reduced through adjusting the concentrations of free β-HCG and PAPP-A measured in the maternal serum by means of a nonlinear regression function modeling the dependence of these values on maternal weight. The database used to establish a version of the algorithm enabling control of the FPR over the whole range of maternal weight consisted of n = 123 546 pregnancies resulting in the birth of a child without chromosomal anomalies. The group with positive outcomes covered n = 500 cases of trisomy 21 and n = 159 trisomies 13 or 18. The dependency of the serum parameters free β-HCG and PAPP-A on maternal weight was analyzed in the sample of negative outcomes by means of nonlinear regression. The fitted regression curve was of exponential form with negative slope. Using this model, all individual measurements were corrected through multiplication with a factor obtained as the ratio of the concentration level predicted by the model to belong to the average maternal body weight of 68.2 kg, over the ordinate of that point on the regression curve which belongs to the weight actually measured. Subsequently, the totality of all values of free β-HCG and PAPP-A corrected for deviation from average weight were used as input data for carrying out the construction of diagnostic discrimination rules described in our recent paper for a database to which no corrections for over- or under-weight had been applied. This entailed in particular the construction of new reference bands for the corrected biochemical values as the basis for calculating the degree of extremeness (DOE) measures to replace the more traditional MOMs. In the final and most crucial step, stratified FPRs were computed and compared over a set of intervals partitioning the whole range of maternal weight into 18 classes. For the posterior risks of both trisomy 21 and 13 / 18 computed from the weight-corrected database, the use of a cutoff value of 1:150 turned out to be an appropriate choice. For T 21, the overall FPR obtained through comparing the individual risks with this cutoff was found to be 3.51 %. The corresponding proportion of ascertained cases of trisomy 21 detected by means of the new algorithm was 86.2 %. For the trisomy 13 / 18 group, the analogous results were a FPR of 2.07 % and a detection rate (DTR) of 83.0 %, respectively. A comparison between the FPRs obtained for the 18 intervals into which the range of maternal weight had been partitioned, showed the deviation of the strata-specific from the overall FPR to be fairly small: for T 21, the FPR ranged from 2.72 to 4.86 %, and the maximum was found in the group of 87.5 - 95.0 kg. For women with a weight of more than 120 kg, the FPR was only slightly above the FPR for the total sample (3.69 as compared to 3.51 %). Similar results were obtained for the discrimination rule constructed for diagnosing T 13 / 18: here, the minimum FPR (1.17 %) was found for patients weighing more than 120 kg, whereas the maximum (2.66 %) occurred in the interval 75.0 - 77.5 kg. In this study we demonstrated that the new algorithm developed by the FMF Germany to estimate risks for fetal trisomies 21 and 13 / 18 combines very good misclassification rates with a far-reaching stability of the false-positive rate against even extreme deviations from the average maternal weight. © Georg Thieme Verlag KG Stuttgart · New York.

Optimal guidance for the space shuttle transition

NASA Technical Reports Server (NTRS)

Stengel, R. F.

1972-01-01

A guidance method for the space shuttle's transition from hypersonic entry to subsonic cruising flight is presented. The method evolves from a numerical trajectory optimization technique in which kinetic energy and total energy (per unit weight) replace velocity and time in the dynamic equations. This allows the open end-time problem to be transformed to one of fixed terminal energy. In its ultimate form, E-Guidance obtains energy balance (including dynamic-pressure-rate damping) and path length control by angle-of-attack modulation and cross-range control by roll angle modulation. The guidance functions also form the basis for a pilot display of instantaneous maneuver limits and destination. Numerical results illustrate the E-Guidance concept and the optimal trajectories on which it is based.

Comparison of mass balance, energy consumption and cost of composting facilities for different types of organic waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang Huijun; Matsuto, Toshihiko, E-mail: matsuto@eng.hokudai.ac.jp

2011-03-15

Mass balance, energy consumption and cost are basic pieces of information necessary for selecting a waste management technology. In this study, composting facilities that treat different types of organic waste were studied by questionnaire survey and via a chemical analysis of material collected at the facilities. The mass balance was calculated on a dry weight basis because the moisture content of organic waste was very high. Even though the ratio of bulking material to total input varied in the range 0-65% on a dry basis, the carbon and ash content, carbon/nitrogen ratio, heavy metal content and inorganic nutrients in themore » compost were clearly influenced by the different characteristics of the input waste. The use of bulking material was not correlated with ash or elemental content in the compost. The operating costs were categorised into two groups. There was some economy of scale for wages and maintenance cost, but the costs for electricity and fuel were proportional to the amount of waste. Differences in operating costs can be explained by differences in the process characteristics.« less

A person-centered approach to moral judgment.

PubMed

Uhlmann, Eric Luis; Pizarro, David A; Diermeier, Daniel

2015-01-01

Both normative theories of ethics in philosophy and contemporary models of moral judgment in psychology have focused almost exclusively on the permissibility of acts, in particular whether acts should be judged on the basis of their material outcomes (consequentialist ethics) or on the basis of rules, duties, and obligations (deontological ethics). However, a longstanding third perspective on morality, virtue ethics, may offer a richer descriptive account of a wide range of lay moral judgments. Building on this ethical tradition, we offer a person-centered account of moral judgment, which focuses on individuals as the unit of analysis for moral evaluations rather than on acts. Because social perceivers are fundamentally motivated to acquire information about the moral character of others, features of an act that seem most informative of character often hold more weight than either the consequences of the act or whether a moral rule has been broken. This approach, we argue, can account for numerous empirical findings that are either not predicted by current theories of moral psychology or are simply categorized as biases or irrational quirks in the way individuals make moral judgments. © The Author(s) 2014.

Effect of cooking methods on antioxidant activity and nitrate content of selected wild Mediterranean plants.

PubMed

Boari, Francesca; Cefola, Maria; Di Gioia, Francesco; Pace, Bernardo; Serio, Francesco; Cantore, Vito

2013-11-01

Wild edible plants (WEP), traditionally consumed in the Mediterranean diet, are considered a rich source of natural antioxidants but can also accumulate significant amount of nitrates. Most WEP are cooked before consumption, therefore, a study was conducted to evaluate the effects of boiling, steaming and microwave cooking processes on the total antioxidant activity (TAA) and nitrate content of eight common WEP. Boiling caused the highest losses of TAA, resulting in a reduction of the TAA on dry weight (DW) basis ranging from 5.5% in Beta vulgaris up to 100% in Urtica dioica. Steaming and microwaving produced the highest increase of TAA on DW basis in Helminthotheca echioides (249.7%) and Taraxacum officinale (60.7%). Boiling caused the highest reduction of nitrate content in all species excluding Asparagus acutifolius that maintained almost unvaried its already low nitrate content. These results suggest that cooking has not always negative effect on product quality, since in certain cases, it may even enhance the nutritional value of WEP by increasing their TAA and reducing the nitrate content.

Effects of CO2 Concentration on Rubisco Activity, Amount, and Photosynthesis in Soybean Leaves 1

PubMed Central

Campbell, William J.; Allen, L. H.; Bowes, George

1988-01-01

Growth at an elevated CO2 concentration resulted in an enhanced capacity for soybean (Glycine max L. Merr. cv Bragg) leaflet photosynthesis. Plants were grown from seed in outdoor controlled-environment chambers under natural solar irradiance. Photosynthetic rates, measured during the seed filling stage, were up to 150% greater with leaflets grown at 660 compared to 330 microliters of CO2 per liter when measured across a range of intercellular CO2 concentrations and irradiance. Soybean plants grown at elevated CO2 concentrations had heavier pod weights per plant, 44% heavier with 660 compared to 330 microliters of CO2 per liter grown plants, and also greater specific leaf weights. Ribulose 1,5-bisphosphate carboxylase/oxygenase (rubisco) activity showed no response (mean activity of 96 micromoles of CO2 per square meter per second expressed on a leaflet area basis) to short-term (∼1 hour) exposures to a range of CO2 concentrations (110-880 microliters per liter), nor was a response of activity (mean activity of 1.01 micromoles of CO2 per minute per milligram of protein) to growth CO2 concentration (160-990 microliters per liter) observed. The amount of rubisco protein was constant, as growth CO2 concentration was varied, and averaged 55% of the total leaflet soluble protein. Although CO2 is required for activation of rubisco, results indicated that within the range of CO2 concentrations used (110-990 microliters per liter), rubisco activity in soybean leaflets, in the light, was not regulated by CO2. PMID:16666460

Item response modeling: a psychometric assessment of the children's fruit, vegetable, water, and physical activity self-efficacy scales among Chinese children.

PubMed

Wang, Jing-Jing; Chen, Tzu-An; Baranowski, Tom; Lau, Patrick W C

2017-09-16

This study aimed to evaluate the psychometric properties of four self-efficacy scales (i.e., self-efficacy for fruit (FSE), vegetable (VSE), and water (WSE) intakes, and physical activity (PASE)) and to investigate their differences in item functioning across sex, age, and body weight status groups using item response modeling (IRM) and differential item functioning (DIF). Four self-efficacy scales were administrated to 763 Hong Kong Chinese children (55.2% boys) aged 8-13 years. Classical test theory (CTT) was used to examine the reliability and factorial validity of scales. IRM was conducted and DIF analyses were performed to assess the characteristics of item parameter estimates on the basis of children's sex, age and body weight status. All self-efficacy scales demonstrated adequate to excellent internal consistency reliability (Cronbach's α: 0.79-0.91). One FSE misfit item and one PASE misfit item were detected. Small DIF were found for all the scale items across children's age groups. Items with medium to large DIF were detected in different sex and body weight status groups, which will require modification. A Wright map revealed that items covered the range of the distribution of participants' self-efficacy for each scale except VSE. Several self-efficacy scales' items functioned differently by children's sex and body weight status. Additional research is required to modify the four self-efficacy scales to minimize these moderating influences for application.

The status of lightweight photovoltaic space array technology based on amorphous silicon solar cells

NASA Technical Reports Server (NTRS)

Hanak, Joseph J.; Kaschmitter, Jim

1991-01-01

Ultralight, flexible photovoltaic (PV) array of amorphous silicon (a-Si) was identified as a potential low cost power source for small satellites. A survey was conducted of the status of the a-Si PV array technology with respect to present and future performance, availability, cost, and risks. For existing, experimental array blankets made of commercial cell material, utilizing metal foil substrates, the Beginning of Life (BOL) performance at Air Mass Zero (AM0) and 35 C includes total power up to 200 W, power per area of 64 W/sq m and power per weight of 258 W/kg. Doubling of power per weight occurs when polyimide substrates are used. Estimated End of Life (EOL) power output after 10 years in a nominal low earth orbit would be 80 pct. of BOL, the degradation being due to largely light induced effects (-10 to -15 pct.) and in part (-5 pct.) to space radiation. Predictions for the year 1995 for flexible PV arrays, made on the basis of published results for rigid a-Si modules, indicate EOL power output per area and per weight of 105 W/sq m and 400 W/kg, respectively, while predictions for the late 1990s based on existing U.S. national PV program goals indicate EOL values of 157 W/sq m and 600 W/kg. Cost estimates by vendors for 200 W ultralight arrays in volume of over 1000 units range from $100/watt to $125/watt. Identified risks include the lack of flexible, space compatible encapsulant, the lack of space qualification effort, recent partial or full acquisitions of US manufacturers of a-Si cells by foreign firms, and the absence of a national commitment for a long range development program toward developing of this important power source for space.

Estimating the risk of Amazonian forest dieback.

PubMed

Rammig, Anja; Jupp, Tim; Thonicke, Kirsten; Tietjen, Britta; Heinke, Jens; Ostberg, Sebastian; Lucht, Wolfgang; Cramer, Wolfgang; Cox, Peter

2010-08-01

*Climate change will very likely affect most forests in Amazonia during the course of the 21st century, but the direction and intensity of the change are uncertain, in part because of differences in rainfall projections. In order to constrain this uncertainty, we estimate the probability for biomass change in Amazonia on the basis of rainfall projections that are weighted by climate model performance for current conditions. *We estimate the risk of forest dieback by using weighted rainfall projections from 24 general circulation models (GCMs) to create probability density functions (PDFs) for future forest biomass changes simulated by a dynamic vegetation model (LPJmL). *Our probabilistic assessment of biomass change suggests a likely shift towards increasing biomass compared with nonweighted results. Biomass estimates range between a gain of 6.2 and a loss of 2.7 kg carbon m(-2) for the Amazon region, depending on the strength of CO(2) fertilization. *The uncertainty associated with the long-term effect of CO(2) is much larger than that associated with precipitation change. This underlines the importance of reducing uncertainties in the direct effects of CO(2) on tropical ecosystems.

Towards scalable binderless electrodes: carbon coated silicon nanofiber paper via Mg reduction of electrospun SiO2 nanofibers.

PubMed

Favors, Zachary; Bay, Hamed Hosseini; Mutlu, Zafer; Ahmed, Kazi; Ionescu, Robert; Ye, Rachel; Ozkan, Mihrimah; Ozkan, Cengiz S

2015-02-06

The need for more energy dense and scalable Li-ion battery electrodes has become increasingly pressing with the ushering in of more powerful portable electronics and electric vehicles (EVs) requiring substantially longer range capabilities. Herein, we report on the first synthesis of nano-silicon paper electrodes synthesized via magnesiothermic reduction of electrospun SiO2 nanofiber paper produced by an in situ acid catalyzed polymerization of tetraethyl orthosilicate (TEOS) in-flight. Free-standing carbon-coated Si nanofiber binderless electrodes produce a capacity of 802 mAh g(-1) after 659 cycles with a Coulombic efficiency of 99.9%, which outperforms conventionally used slurry-prepared graphite anodes by over two times on an active material basis. Silicon nanofiber paper anodes offer a completely binder-free and Cu current collector-free approach to electrode fabrication with a silicon weight percent in excess of 80%. The absence of conductive powder additives, metallic current collectors, and polymer binders in addition to the high weight percent silicon all contribute to significantly increasing capacity at the cell level.

Cost studies for commercial fuselage crown designs

NASA Technical Reports Server (NTRS)

Walker, T. H.; Smith, P. J.; Truslove, G.; Willden, K. S.; Metschan, S. L.; Pfahl, C. L.

1991-01-01

Studies were conducted to evaluate the cost and weight potential of advanced composite design concepts in the crown region of a commercial transport. Two designs from each of three design families were developed using an integrated design-build team. A range of design concepts and manufacturing processes were included to allow isolation and comparison of cost centers. Detailed manufacturing/assembly plans were developed as the basis for cost estimates. Each of the six designs was found to have advantages over the 1995 aluminum benchmark in cost and weight trade studies. Large quadrant panels and cobonded frames were found to save significant assembly labor costs. Comparisons of high- and intermediate-performance fiber systems were made for skin and stringer applications. Advanced tow placement was found to be an efficient process for skin lay up. Further analysis revealed attractive processes for stringers and frames. Optimized designs were informally developed for each design family, combining the most attractive concepts and processes within that family. A single optimized design was selected as the most promising, and the potential for further optimization was estimated. Technical issues and barriers were identified.

Failure mode prediction for composite structural insulated panels with MgO board facings

NASA Astrophysics Data System (ADS)

Smakosz, Łukasz; Kreja, Ireneusz

2018-01-01

Sandwich panels are readily used in civil engineering due to their high strength to weight ratio and the ease and speed of assembly. The idea of a sandwich section is to combine thin and durable facings with a light-weight core and the choice of materials used allows obtaining the desired behaviour. Panels in consideration consist of MgO (magnesium oxide) board facings and expanded polystyrene core and are characterized by immunity to biological corrosion, a high thermal insulation and a relatively low impact on environment. Customizing the range of panels to meet market needs requires frequent size changes, leading to different failure modes, which are identified in a series of costly full-scale laboratory tests. A nonlinear numerical model was created with a use of a commercial ABAQUS code and a user-defined procedure, which is able to reproduce observed failure mechanisms; its parameters were established on the basis of small-scale tests and numerical experiments. The model was validated by a comparison with the results of the full-scale bending and compression tests. The results obtained were in satisfactory agreement with the test data.

Weight changes and their associations with demographic and clinical characteristics in risperidone maintenance treatment for schizophrenia.

PubMed

Xiang, Y-T; Wang, C-Y; Ungvari, G S; Kreyenbuhl, J A; Chiu, H F K; Lai, K Y C; Lee, E H M; Bo, Q-J; Dixon, L B

2011-06-01

This study aimed to characterize weight changes in schizophrenia patients taking risperidone as part of a randomized, controlled, open-label clinical trial. A total of 374 patients with schizophrenia who had been clinically stabilized following an acute episode were randomly assigned to a 'no-dose-reduction' group (initial optimal therapeutic doses continued throughout the study), a '4-week group' (initial optimal therapeutic doses continued for 4 weeks followed by a half dose reduction that was maintained until the end of the study) or a '26-week group' (initial optimal therapeutic doses continued for 26 weeks followed by a half dose reduction until the end of the study). Participants were assessed monthly using standardized assessment instruments during the first 6 months, and then every 2 months until the last recruited patient completed the 1-year follow-up. Weight gain was defined as gaining at least 7% of initial body weight, weight loss as losing at least 7% of initial body weight. A BMI <18.5 kg m⁻² was defined as underweight, 18.5-24.9 kg m⁻² as normal range, and ≥ 25 kg m⁻² as overweight or obese. At the end of follow-up, of the patients who started within the underweight range (n=22), 77.3% gained weight, whereas 4.5% lost weight. The corresponding figures were 39.6% and 4.8% in patients who started at normal weight (n=273), respectively, and 17.7% and 17.7% in patients who started at overweight (n=79), respectively. At the same time, 59.1% of the patients who started at underweight range went into the normal weight and 13.6% into the overweight/obese range, respectively, while 24.5% of those who started at normal weight went into the overweight/obese range, and 1.1% into underweight range, respectively; 20.3% of those who started at overweight range went into normal weight at the end of the follow-up. Multiple logistic regression analyses revealed that being underweight or normal weight at study entry predicted weight gain compared to being overweight, whereas being overweight at entry was associated with a higher likelihood of weight loss compared to being normal weight. No correlation was found between weight change and dose reduction. Weight change is a common, long-term, but heterogeneous side effect in risperidone maintenance treatment for stable schizophrenia patients. Special attention should be paid to fluctuations in weight that may occur throughout the course of treatment with risperidone. © Georg Thieme Verlag KG Stuttgart · New York.

Changes in growth and antioxidant status of alfalfa sprouts during sprouting as affected by gamma irradiation of seeds.

PubMed

Fan, Xuetong; Thayer, Donald W; Sokorai, Kimberly J B

2004-03-01

Viking 3000 alfalfa seeds irradiated with gamma rays to doses of 0, 1, 2, 3, or 4 kGy were sprouted and allowed to grow for up to 8 days at 23 degrees C. Germination, growth (yield and length), antioxidant capacity, and ascorbic acid (AA) were measured during sprouting. Results showed percent germination of the seeds and the rates of growth of the sprouts were inversely related to the radiation dose absorbed by the seeds. Both antioxidant capacity and AA content expressed on a fresh weight basis decreased during growth of the sprouts. Sprouts grown from irradiated seeds had greater antioxidant capacity and AA content on a fresh weight basis than those grown from nonirradiated seeds. However, when the nutritive values were expressed on a per gram of seed basis, irradiation had no effect on the nutritive values of sprouts.

A Bayesian spatial model for neuroimaging data based on biologically informed basis functions.

PubMed

Huertas, Ismael; Oldehinkel, Marianne; van Oort, Erik S B; Garcia-Solis, David; Mir, Pablo; Beckmann, Christian F; Marquand, Andre F

2017-11-01

The dominant approach to neuroimaging data analysis employs the voxel as the unit of computation. While convenient, voxels lack biological meaning and their size is arbitrarily determined by the resolution of the image. Here, we propose a multivariate spatial model in which neuroimaging data are characterised as a linearly weighted combination of multiscale basis functions which map onto underlying brain nuclei or networks or nuclei. In this model, the elementary building blocks are derived to reflect the functional anatomy of the brain during the resting state. This model is estimated using a Bayesian framework which accurately quantifies uncertainty and automatically finds the most accurate and parsimonious combination of basis functions describing the data. We demonstrate the utility of this framework by predicting quantitative SPECT images of striatal dopamine function and we compare a variety of basis sets including generic isotropic functions, anatomical representations of the striatum derived from structural MRI, and two different soft functional parcellations of the striatum derived from resting-state fMRI (rfMRI). We found that a combination of ∼50 multiscale functional basis functions accurately represented the striatal dopamine activity, and that functional basis functions derived from an advanced parcellation technique known as Instantaneous Connectivity Parcellation (ICP) provided the most parsimonious models of dopamine function. Importantly, functional basis functions derived from resting fMRI were more accurate than both structural and generic basis sets in representing dopamine function in the striatum for a fixed model order. We demonstrate the translational validity of our framework by constructing classification models for discriminating parkinsonian disorders and their subtypes. Here, we show that ICP approach is the only basis set that performs well across all comparisons and performs better overall than the classical voxel-based approach. This spatial model constitutes an elegant alternative to voxel-based approaches in neuroimaging studies; not only are their atoms biologically informed, they are also adaptive to high resolutions, represent high dimensions efficiently, and capture long-range spatial dependencies, which are important and challenging objectives for neuroimaging data. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Weight Measurements and Standards for Soldiers, Phase 2

DTIC Science & Technology

2011-10-01

Eating, Activity, and Lifestyle Training Headquarters (H.E.A.L.T.H.) (1). This program was designed to address weight management needs and non-compliance...and safe lifestyle change to sustain healthy weight and performance on a year-round basis. The H.E.A.L.T.H. website was specifically designed to aid...accessed and utilized via Smartphone devices, e.g. Droid, iphone, Blackberry. The launch of the program on Smartphones has enabled field managers

A computer program for calculation of doses and prices of injectable medications based on body weight or body surface area

PubMed Central

2004-01-01

Abstract A computer program (CalcAnesth) was developed with Visual Basic for the purpose of calculating the doses and prices of injectable medications on the basis of body weight or body surface area. The drug names, concentrations, and prices are loaded from a drug database. This database is a simple text file, that the user can easily create or modify. The animal names and body weights can be loaded from a similar database. After typing the dose and the units into the user interface, the results will be automatically displayed. The program is able to open and save anesthetic protocols, and export or print the results. This CalcAnesth program can be useful in clinical veterinary anesthesiology and research. The rationale for dosing on the basis of body surface area is also discussed in this article. PMID:14979437

40 CFR 63.2263 - Initial compliance demonstration for a dry rotary dryer.

Code of Federal Regulations, 2013 CFR

2013-07-01

... inlet moisture content of less than or equal to 30 percent (by weight, dry basis) and operates with a... dry rotary dryer. You must record the inlet furnish moisture content (dry basis) and inlet dryer... days. You must submit the highest recorded 24-hour average inlet furnish moisture content and the...

40 CFR 63.2263 - Initial compliance demonstration for a dry rotary dryer.

Code of Federal Regulations, 2012 CFR

2012-07-01

... inlet moisture content of less than or equal to 30 percent (by weight, dry basis) and operates with a... dry rotary dryer. You must record the inlet furnish moisture content (dry basis) and inlet dryer... days. You must submit the highest recorded 24-hour average inlet furnish moisture content and the...

40 CFR 63.2263 - Initial compliance demonstration for a dry rotary dryer.

Code of Federal Regulations, 2014 CFR

2014-07-01

... inlet moisture content of less than or equal to 30 percent (by weight, dry basis) and operates with a... dry rotary dryer. You must record the inlet furnish moisture content (dry basis) and inlet dryer... days. You must submit the highest recorded 24-hour average inlet furnish moisture content and the...

The genetic and biological basis of feed efficiency in mid-lactation Holstein dairy cows

USDA-ARS?s Scientific Manuscript database

The objective of this study was to characterize the genetic architecture and biological basis of feed efficiency in lactating Holstein cows. In total, 4,916 cows with actual or imputed genotypes for 60,671 SNP had individual feed intake, milk yield, milk composition, and body weight records. Cows we...

Basis convergence of range-separated density-functional theory.

PubMed

Franck, Odile; Mussard, Bastien; Luppi, Eleonora; Toulouse, Julien

2015-02-21

Range-separated density-functional theory (DFT) is an alternative approach to Kohn-Sham density-functional theory. The strategy of range-separated density-functional theory consists in separating the Coulomb electron-electron interaction into long-range and short-range components and treating the long-range part by an explicit many-body wave-function method and the short-range part by a density-functional approximation. Among the advantages of using many-body methods for the long-range part of the electron-electron interaction is that they are much less sensitive to the one-electron atomic basis compared to the case of the standard Coulomb interaction. Here, we provide a detailed study of the basis convergence of range-separated density-functional theory. We study the convergence of the partial-wave expansion of the long-range wave function near the electron-electron coalescence. We show that the rate of convergence is exponential with respect to the maximal angular momentum L for the long-range wave function, whereas it is polynomial for the case of the Coulomb interaction. We also study the convergence of the long-range second-order Møller-Plesset correlation energy of four systems (He, Ne, N2, and H2O) with cardinal number X of the Dunning basis sets cc - p(C)V XZ and find that the error in the correlation energy is best fitted by an exponential in X. This leads us to propose a three-point complete-basis-set extrapolation scheme for range-separated density-functional theory based on an exponential formula.

Cryopreservation of mango (Mangifera indica L.) embryogenic cultures.

PubMed

Wu, Yong-Jie; Huang, Xue-Ling; Xiao, Jie-Ning; Li, Xiao-Ju; Zhou, Ming-De; Engelmann, Florent

2003-01-01

Three techniques were compared for cryopreserving embryogenic masses (EMs) sampled from mango (Mangifera indica L.) cv. Zihua embryogenic cultures: (i) encapsulation/dehydration; (ii) pregrowth/dehydration; and (iii) vitrification. In all experiments, EMs were sampled from embryogenic cultures during their exponential growth phase and pretreated for 24 h on solid medium containing 0.5 M sucrose before freezing. No recovery was achieved after cryopreservation using the encapsulation/dehydration technique, whatever the moisture content (fresh weight basis) of EMs, which ranged from 78.3% without dehydration to 40.8% after 6 h dehydration. With the pregrowth plus dehydration technique, limited recovery (8.3%) was achieved after desiccation of EMs for 1 h, to 58.5% MC. Using the vitrification technique, recovery ranged from 94.3% after treatment of EMs with the PVS3 vitrification solution for 20 min (EM moisture content of 34.7%) to 10.9% after a 120 min treatment with the vitrification solution (EM moisture content of 26.0%).

Quantal basis of vesicle growth and information content, a unified approach.

PubMed

Nitzany, Eyal; Hammel, Ilan; Meilijson, Isaac

2010-09-07

Secretory vesicles express a periodic multimodal size distribution. The successive modes are integral multiples of the smallest mode (G(1)). The vesicle content ranges from macromolecules (proteins, mucopolysaccharides and hormones) to low molecular weight molecules (neurotransmitters). A steady-state model has been developed to emulate a mechanism for the introduction of vesicles of monomer size, which grow by a unit addition mechanism, G(1)+G(n)-->G(n+1) which, at a later stage are eliminated from the system. We describe a model of growth and elimination transition rates which adequately illustrates the distributions of vesicle population size at steady-state and upon elimination. Consequently, prediction of normal behavior and pathological perturbations is feasible. Careful analysis of spontaneous secretion, as compared to short burst-induced secretion, suggests that the basic character-code for reliable communication should be within a range of only 8-10 vesicles' burst which may serve as a yes/no message. Copyright 2010 Elsevier Ltd. All rights reserved.

Triclosan - an antibacterial compound in water, sediment and fish of River Gomti, India.

PubMed

Nag, Subir Kumar; Das Sarkar, Soma; Manna, Sanjib Kumar

2018-06-20

Triclosan (TCS), the antibacterial agent commonly used in personal care products is highly toxic to aquatic lives particularly algae, zooplankton and fish. It is bio-accumulative and has endocrine disruptive properties. In this present study, we monitored the occurrence of TCS in water, sediment and fish samples collected from stretch of about 450 km of River Gomti, a major tributary of River Ganga, in India. An isocratic reversed-phase HPLC method was standardized for determination of TCS in samples. In water, TCS was detected in the range of 1.1-9.65 μg/l while in sediments the level was 5.11-50.36 μg/kg. It was also found in fishes of different species in concentrations ranging from 13 to 1040 μg/kg on wet weight basis. However, estimated daily intake of TCS through contaminated fish was much below the acceptable daily intake (50 μg/kg body wt/day) and thus safe from human health hazard point of view.

Macromolecular structural changes in bituminous coals during extraction and solubilization. Annual technical progress report, September 1, 1980-August 31, 1981

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peppas, N.A.; Hill-Lievense, M.E.; Hooker, D.T. II

1981-01-01

Seven coal samples ranging from a lignite with 69.95% carbon to an anthracite with 94.17% carbon on a dry mineral matter-free (dmmf) basis were extracted with pyridine at its reflux temperature for two weeks. The coal matrices obtained were subjected to two degradation techniques, the Sternberg reductive alkylation technique and the Miyake alkylation technique. Gel permeation chromatographic analysis of pyridine-extracted liquids of the alkylated coal showed average molecular weights smaller than those of the original coal extracts. Electron impact mass spectrometry was used to obtain the mass spectra of these alkylated coal samples. Based on investigation of the recurring patternmore » of the peaks of the mass spectra of these products it was concluded that a cluster size of 126 to 130 is characteristic of the crosslinked structure of the coal studied. In addition, several chemical compounds in the range of m/e 78-191 were identified.« less

Synthesis of atmospheric turbulence point spread functions by sparse and redundant representations

NASA Astrophysics Data System (ADS)

Hunt, Bobby R.; Iler, Amber L.; Bailey, Christopher A.; Rucci, Michael A.

2018-02-01

Atmospheric turbulence is a fundamental problem in imaging through long slant ranges, horizontal-range paths, or uplooking astronomical cases through the atmosphere. An essential characterization of atmospheric turbulence is the point spread function (PSF). Turbulence images can be simulated to study basic questions, such as image quality and image restoration, by synthesizing PSFs of desired properties. In this paper, we report on a method to synthesize PSFs of atmospheric turbulence. The method uses recent developments in sparse and redundant representations. From a training set of measured atmospheric PSFs, we construct a dictionary of "basis functions" that characterize the atmospheric turbulence PSFs. A PSF can be synthesized from this dictionary by a properly weighted combination of dictionary elements. We disclose an algorithm to synthesize PSFs from the dictionary. The algorithm can synthesize PSFs in three orders of magnitude less computing time than conventional wave optics propagation methods. The resulting PSFs are also shown to be statistically representative of the turbulence conditions that were used to construct the dictionary.

The defence of body weight: a physiological basis for weight regain after weight loss.

PubMed

Sumithran, Priya; Proietto, Joseph

2013-02-01

Although weight loss can usually be achieved by restricting food intake, the majority of dieters regain weight over the long-term. In the hypothalamus, hormonal signals from the gastrointestinal tract, adipose tissue and other peripheral sites are integrated to influence appetite and energy expenditure. Diet-induced weight loss is accompanied by several physiological changes which encourage weight regain, including alterations in energy expenditure, substrate metabolism and hormone pathways involved in appetite regulation, many of which persist beyond the initial weight loss period. Safe effective long-term strategies to overcome these physiological changes are needed to help facilitate maintenance of weight loss. The present review, which focuses on data from human studies, begins with an outline of body weight regulation to provide the context for the subsequent discussion of short- and long-term physiological changes which accompany diet-induced weight loss.

Changes in body weight after treatment of primary hypothyroidism with levothyroxine.

PubMed

Lee, Sun Y; Braverman, Lewis E; Pearce, Elizabeth N

2014-11-01

Surprisingly few studies have examined weight change in hypothyroid patients after initiation of levothyroxine (LT4) therapy. Our study aimed to investigate weight change after initiation of LT4 treatment for primary hypothyroidism. Using electronic medical records from Boston Medical Center, Boston, Massachusetts, we performed a retrospective cohort study between January 1, 2003, and February 1, 2011. Adults ≥18 years of age with newly diagnosed primary hypothyroidism with an initial thyroid-stimulating hormone (TSH) level ≥10 mIU/L were identified. Patients with postsurgical hypothyroidism, thyroid cancer, and a history of radioactive iodine or head/neck irradiation, congestive heart failure, anorexia nervosa, end-stage renal disease, cirrhosis, pregnancy, or use of prescription weight-loss medications were excluded. TSH and weight at diagnosis and up to 24 months after LT4 initiation were collected. Weight change was assessed at the first posttreatment serum TSH level <5 mIU/L. A total of 101 patients (mean age, 48 ± 15 years; 71% women) were included. Initial median TSH was 18.3 mIU/L (range, 10.1 to 710.5 mIU/L) and initial median weight was 79.6 kg (range 41.5 to 167.5 kg). Posttreatment median TSH level was 2.3 mIU/L (range, 0.04 to 5 mIU/L), and weight change at a median of 5 months (range, 1.1 to 25.6 months) was -0.1 kg (range, -20.6 to 7.7 kg). Initial median body mass index (BMI) of 95 of the patients was 29.3 kg/m2 (range, 19.5 to 56.1 kg/m2), and the median change in BMI was -0.1 kg/m2 (range, -7.1 to 3.3 kg/m2). Only 52% of patients lost weight, with a mean weight loss of 3.8 ± 4.4 kg. Gender, race, education, insurance type, age, initial TSH level, time to normalization of TSH, and initial weight were not associated with changes in weight or BMI. Contrary to popular belief, our study of 101 patients with primary hypothyroidism showed that no significant weight change occurs after initiation of LT4 treatment.

75 FR 168 - Self-Regulatory Organizations; NYSE Arca, Inc.; Order Approving Proposed Rule Change Amending...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-04

... lower the minimum component stock weight requirement from 90% to 70% of the weight of the underlying... component stock trading volumes are determined on a global basis. Finally, as an option for meeting the... minimize potential manipulation. The Commission also believes that the proposed use of minimum notional...

21 CFR 173.310 - Boiler water additives.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Boiler water additives. 173.310 Section 173.310... CONSUMPTION Specific Usage Additives § 173.310 Boiler water additives. Boiler water additives may be safely... water. Copolymer contains not more than 0.5 percent by weight of acrylic acid monomer (dry weight basis...

21 CFR 173.310 - Boiler water additives.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Boiler water additives. 173.310 Section 173.310... CONSUMPTION Specific Usage Additives § 173.310 Boiler water additives. Boiler water additives may be safely... water. Copolymer contains not more than 0.5 percent by weight of acrylic acid monomer (dry weight basis...

21 CFR 173.310 - Boiler water additives.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Boiler water additives. 173.310 Section 173.310... CONSUMPTION Specific Usage Additives § 173.310 Boiler water additives. Boiler water additives may be safely... water. Copolymer contains not more than 0.5 percent by weight of acrylic acid monomer (dry weight basis...

Cue Reliance in L2 Written Production

ERIC Educational Resources Information Center

Wiechmann, Daniel; Kerz, Elma

2014-01-01

Second language learners reach expert levels in relative cue weighting only gradually. On the basis of ensemble machine learning models fit to naturalistic written productions of German advanced learners of English and expert writers, we set out to reverse engineer differences in the weighting of multiple cues in a clause linearization problem. We…

Relating the ability of mallards to ingest high levels of sediment to potential contaminant exposure in waterfowl

USGS Publications Warehouse

Heinz, Gary H.; Beyer, W. Nelson; Hoffman, David J.; Audet, Daniel J.

2010-01-01

When waterfowl feed from the bottom of bodies of water, they sometimes ingest sediments along with their food, and this sediment can be a major source of contaminants. Learning how much sediment waterfowl can consume in their diet and still maintain their health would be helpful in assessing potential threats from contaminants in sediment. In a controlled laboratory study the maximum tolerated percentage of sediment in the diet of mallards (Anas platyrhynchos) was measured. When fed a well-balanced commercial avian diet, 50, 60, or 70% sediment in the diet on a dry-weight basis did not cause weight loss over a two-week period. Ducks fed this same commercial diet, but containing 80 or 90% sediment, lost 8.6 and 15.6% of their body weight, respectively, in the first week on those diets. After factoring in the ability of the mallards to sieve out some of the sediment from their diet before swallowing it, we concluded that the mallards could maintain their health even when approximately half of what they swallowed, on a dry-weight basis, was sediment.

Short-term prediction of chaotic time series by using RBF network with regression weights.

PubMed

Rojas, I; Gonzalez, J; Cañas, A; Diaz, A F; Rojas, F J; Rodriguez, M

2000-10-01

We propose a framework for constructing and training a radial basis function (RBF) neural network. The structure of the gaussian functions is modified using a pseudo-gaussian function (PG) in which two scaling parameters sigma are introduced, which eliminates the symmetry restriction and provides the neurons in the hidden layer with greater flexibility with respect to function approximation. We propose a modified PG-BF (pseudo-gaussian basis function) network in which the regression weights are used to replace the constant weights in the output layer. For this purpose, a sequential learning algorithm is presented to adapt the structure of the network, in which it is possible to create a new hidden unit and also to detect and remove inactive units. A salient feature of the network systems is that the method used for calculating the overall output is the weighted average of the output associated with each receptive field. The superior performance of the proposed PG-BF system over the standard RBF are illustrated using the problem of short-term prediction of chaotic time series.

Associations of Maternal Weight Gain in Pregnancy With Offspring Cognition in Childhood and Adolescence: Findings From the Avon Longitudinal Study of Parents and Children

PubMed Central

Gage, Suzanne H.; Lawlor, Debbie A.; Tilling, Kate; Fraser, Abigail

2013-01-01

An association of gestational weight gain (GWG) with offspring cognition has been postulated. We used data from the Avon Longitudinal Study of Parents and Children, a United Kingdom prospective cohort (1990 through the present) with a median of 10 maternal weight measurements in pregnancy. These were used to allocate participants to 2009 Institute of Medicine weight-gain categories and in random effect linear spline models. Outcomes were School Entry Assessment score (age, 4 years; n = 5,832), standardized intelligence quotient assessed by Wechsler Intelligence Scale for Children (age, 8 years; n = 5,191), and school final-examination results (age, 16 years; n = 7,339). Offspring of women who gained less weight than recommended had a 0.075 standard deviation lower mean School Entry Assessment score (95% confidence interval: −0.127, −0.023) and were less likely to achieve adequate final-examination results (odds ratio = 0.88, 95% confidence interval: 0.78, 0.99) compared with offspring of women who gained as recommended. GWG in early pregnancy (defined as 0–18 weeks on the basis of a knot point at 18 weeks) and midpregnancy (defined as 18–28 weeks on the basis of knot points at 18 and 28 weeks) was positively associated with School Entry Assessment score and intelligence quotient. GWG in late pregnancy (defined as 28 weeks onward on the basis of a knot point at 28 weeks) was positively associated with offspring intelligence quotient and with increased odds of offspring achieving adequate final-examination results in mothers who were overweight prepregnancy. Findings support small positive associations between GWG and offspring cognitive development, which may have lasting effects on educational attainment up to age 16 years. PMID:23388581

Associations of maternal weight gain in pregnancy with offspring cognition in childhood and adolescence: findings from the Avon Longitudinal Study of Parents and Children.

PubMed

Gage, Suzanne H; Lawlor, Debbie A; Tilling, Kate; Fraser, Abigail

2013-03-01

An association of gestational weight gain (GWG) with offspring cognition has been postulated. We used data from the Avon Longitudinal Study of Parents and Children, a United Kingdom prospective cohort (1990 through the present) with a median of 10 maternal weight measurements in pregnancy. These were used to allocate participants to 2009 Institute of Medicine weight-gain categories and in random effect linear spline models. Outcomes were School Entry Assessment score (age, 4 years; n = 5,832), standardized intelligence quotient assessed by Wechsler Intelligence Scale for Children (age, 8 years; n = 5,191), and school final-examination results (age, 16 years; n = 7,339). Offspring of women who gained less weight than recommended had a 0.075 standard deviation lower mean School Entry Assessment score (95% confidence interval: -0.127, -0.023) and were less likely to achieve adequate final-examination results (odds ratio = 0.88, 95% confidence interval: 0.78, 0.99) compared with offspring of women who gained as recommended. GWG in early pregnancy (defined as 0-18 weeks on the basis of a knot point at 18 weeks) and midpregnancy (defined as 18-28 weeks on the basis of knot points at 18 and 28 weeks) was positively associated with School Entry Assessment score and intelligence quotient. GWG in late pregnancy (defined as 28 weeks onward on the basis of a knot point at 28 weeks) was positively associated with offspring intelligence quotient and with increased odds of offspring achieving adequate final-examination results in mothers who were overweight prepregnancy. Findings support small positive associations between GWG and offspring cognitive development, which may have lasting effects on educational attainment up to age 16 years.

High temperature ablative foam

NASA Technical Reports Server (NTRS)

Liu, Matthew T. (Inventor)

1992-01-01

An ablative foam composition is formed of approximately 150 to 250 parts by weight polymeric isocyanate having an isocyanate functionality of 2.6 to 3.2; approximately 15 to 30 parts by weight reactive flame retardant having a hydroxyl number range from 200-260; approximately 10 to 40 parts by weight non-reactive flame retardant; approximately 10 to 40 parts by weight nonhydrolyzable silicone copolymer having a hydroxyl number range from 75-205; and approximately 3 to 16 parts by weight amine initiated polyether resin having an isocyanate functionality greater than or equal to 3.0 and a hydroxyl number range from 400-800.

Toward a Middle-Range Theory of Weight Management.

PubMed

Pickett, Stephanie; Peters, Rosalind M; Jarosz, Patricia A

2014-07-01

The authors of this paper present the middle-range theory of weight management that focuses on cultural, environmental, and psychosocial factors that influence behaviors needed for weight control. The theory of weight management was developed deductively from Orem's theory of self-care, a constituent theory within the broader self-care deficit nursing theory and from research literature. Linkages between the conceptual and middle-range theory concepts are illustrated using a substruction model. The development of the theory of weight management serves to build nursing science by integrating extant nursing theory and empirical knowledge. This theory may help predict weight management in populations at risk for obesity-related disorders. © The Author(s) 2014.

Genetic parameters for wool traits, live weight, and ultrasound carcass traits in Merino sheep.

PubMed

Mortimer, S I; Hatcher, S; Fogarty, N M; van der Werf, J H J; Brown, D J; Swan, A A; Greeff, J C; Refshauge, G; Edwards, J E Hocking; Gaunt, G M

2017-05-01

Genetic correlations between 29 wool production and quality traits and live weight and ultrasound fat depth (FAT) and eye muscle depth (EMD) traits were estimated from the Information Nucleus (IN). The IN comprised 8 genetically linked flocks managed across a range of Australian sheep production environments. The data were from a maximum of 9,135 progeny born over 5 yr from 184 Merino sires and 4,614 Merino dams. The wool traits included records for yearling and adult fleece weight, fiber diameter (FD), staple length (SL), fiber diameter CV (FDCV), scoured color, and visual scores for breech and body wrinkle. We found high heritability for the major yearling wool production traits and some wool quality traits, whereas other wool quality traits, wool color, and visual traits were moderately heritable. The estimates of heritability for live weight generally increased with age as maternal effects declined. Estimates of heritability for the ultrasound traits were also higher when measured at yearling age rather than at postweaning age. The genetic correlations for fleece weight with live weights were positive (favorable) and moderate (approximately 0.5 ± 0.1), whereas those with FD were approximately 0.3 (unfavorable). The other wool traits had lower genetic correlations with the live weights. The genetic correlations for FAT and EMD with FD and SL were positive and low, with FDCV low to moderate negative, but variable with wool weight and negligible for the other wool traits. The genetic correlations for FAT and EMD with postweaning weight were positive and high (0.61 ± 0.18 to 0.75 ± 0.14) but were generally moderate with weights at other ages. Selection for increased live weight will result in a moderate correlated increase in wool weight as well as favorable reductions in breech cover and wrinkle, along with some unfavorable increases in FD and wool yellowness but little impact on other wool traits. The ultrasound meat traits, FAT and EMD, were highly positively genetically correlated (0.8), and selection to increase them would result in a small unfavorable correlated increase in FD, moderately favorable reductions in breech cover and wrinkle, but equivocal or negligible changes in other wool traits. The estimated parameters provide the basis for calculation of more accurate Australian Sheep Breeding Values and selection indexes that combine wool and meat objectives in Merino breeding programs.

Cytotoxicity associated with electrospun polyvinyl alcohol.

PubMed

Pathan, Saif G; Fitzgerald, Lisa M; Ali, Syed M; Damrauer, Scott M; Bide, Martin J; Nelson, David W; Ferran, Christiane; Phaneuf, Tina M; Phaneuf, Matthew D

2015-11-01

Polyvinyl alcohol (PVA) is a synthetic, water-soluble polymer, with applications in industries ranging from textiles to biomedical devices. Research on electrospinning of PVA has been targeted toward optimizing or finding novel applications in the biomedical field. However, the effects of electrospinning on PVA biocompatibility have not been thoroughly evaluated. In this study, the cytotoxicity of electrospun PVA (nPVA) which was not crosslinked after electrospinning was assessed. PVA polymers of several molecular weights were dissolved in distilled water and electrospun using the same parameters. Electrospun PVA materials with varying molecular weights were then dissolved in tissue culture medium and directly compared against solutions of nonelectrospun PVA polymer in human coronary artery smooth muscle cells and human coronary artery endothelial cells cultures. All nPVA solutions were cytotoxic at a threshold molar concentration that correlated with the molecular weight of the starting PVA polymer. In contrast, none of the nonelectrospun PVA solutions caused any cytotoxicity, regardless of their concentration in the cell culture. Evaluation of the nPVA material by differential scanning calorimetry confirmed that polymer degradation had occurred after electrospinning. To elucidate the identity of the nPVA component that caused cytotoxicity, nPVA materials were dissolved, fractionated using size exclusion columns, and the different fractions were added to HCASMC and human coronary artery endothelial cells cultures. These studies indicated that the cytotoxic component of the different nPVA solutions were present in the low-molecular-weight fraction. Additionally, the amount of PVA present in the 3-10 kg/mol fraction was approximately sixfold greater than that in the nonelectrospun samples. In conclusion, electrospinning of PVA resulted in small-molecular-weight fractions that were cytotoxic to cells. This result demonstrates that biocompatibility of electrospun biodegradable polymers should not be assumed on the basis of success of their nonelectrospun predecessors. © 2015 Wiley Periodicals, Inc.

Understanding Individual-Level Change through the Basis Functions of a Latent Curve Model

ERIC Educational Resources Information Center

Blozis, Shelley A.; Harring, Jeffrey R.

2017-01-01

Latent curve models have become a popular approach to the analysis of longitudinal data. At the individual level, the model expresses an individual's response as a linear combination of what are called "basis functions" that are common to all members of a population and weights that may vary among individuals. This article uses…

Basis convergence of range-separated density-functional theory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Franck, Odile, E-mail: odile.franck@etu.upmc.fr; Mussard, Bastien, E-mail: bastien.mussard@upmc.fr; CNRS, UMR 7616, Laboratoire de Chimie Théorique, F-75005 Paris

2015-02-21

Range-separated density-functional theory (DFT) is an alternative approach to Kohn-Sham density-functional theory. The strategy of range-separated density-functional theory consists in separating the Coulomb electron-electron interaction into long-range and short-range components and treating the long-range part by an explicit many-body wave-function method and the short-range part by a density-functional approximation. Among the advantages of using many-body methods for the long-range part of the electron-electron interaction is that they are much less sensitive to the one-electron atomic basis compared to the case of the standard Coulomb interaction. Here, we provide a detailed study of the basis convergence of range-separated density-functional theory. Wemore » study the convergence of the partial-wave expansion of the long-range wave function near the electron-electron coalescence. We show that the rate of convergence is exponential with respect to the maximal angular momentum L for the long-range wave function, whereas it is polynomial for the case of the Coulomb interaction. We also study the convergence of the long-range second-order Møller-Plesset correlation energy of four systems (He, Ne, N{sub 2}, and H{sub 2}O) with cardinal number X of the Dunning basis sets cc − p(C)V XZ and find that the error in the correlation energy is best fitted by an exponential in X. This leads us to propose a three-point complete-basis-set extrapolation scheme for range-separated density-functional theory based on an exponential formula.« less

Critical weight mediates sex-specific body size plasticity and sexual dimorphism in the yellow dung fly Scathophaga stercoraria (Diptera: Scathophagidae).

PubMed

Rohner, Patrick T; Blanckenhorn, Wolf U; Schäfer, Martin A

2017-05-01

Ultimate factors driving insect body size are rather well understood, while-apart from a few model species-the underlying physiological and developmental mechanisms received less attention. We investigate the physiological basis of adaptive size variation in the yellow dung fly Scathophaga stercoraria, which shows pronounced male-biased sexual size dimorphism and strong body size plasticity. We estimate variation of a major physiological threshold, the critical weight, which is the mass at which a larva initiates pupariation. Critical weight was associated with sexual size dimorphism and sex-specific plasticity, and is thus a likely target of selection on adult size. Detailed larval growth trajectories derived from individuals raised at two food and temperature treatments further reveal that sex-specific size plasticity is mediated by faster initial growth of males that later becomes reduced by higher male weight loss during the wandering stage. We further demonstrate that integral growth rates, which are typically calculated as simple ratios of egg-to-adult development time and adult weight, do not necessarily well reflect variation in instantaneous growth rates. We illustrate the importance of detailed assessments of ontogenetic growth trajectories for the understanding of adaptive size variation and discuss the mechanistic basis of size determination in shaping sex-specific phenotypic plasticity. © 2017 Wiley Periodicals, Inc.

Determining weight and moisture properties of sound and fusarium-damaged single wheat kernels by near infrared spectroscopy

USDA-ARS?s Scientific Manuscript database

Single kernel moisture content (MC) is important in the measurement of other quality traits in single kernels since many traits are expressed on a dry weight basis, and MC affects viability, storage quality, and price. Also, if near-infrared (NIR) spectroscopy is used to measure grain traits, the in...

78 FR 59878 - Atlantic Highly Migratory Species; Commercial Atlantic Aggregated Large Coastal Shark (LCS...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-30

... submitted electronically on a weekly basis through a NMFS-approved electronic reporting system by the dealer... metric tons (mt) dressed weight (dw) (149,914 lb dw) of non-blacknose SCS quota from the Atlantic region... lb dw), the Atlantic hammerhead shark management group quota is 27.1 metric tons (mt) dressed weight...

Shock-loading response of advanced materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gray, G.T. III

1993-08-01

Advanced materials, such as composites (metal, ceramic, or polymer-matrix), intermetallics, foams (metallic or polymeric-based), laminated materials, and nanostructured materials are receiving increasing attention because their properties can be custom tailored specific applications. The high-rate/impact response of advanced materials is relevant to a broad range of service environments such as the crashworthiness of civilian/military vehicles, foreign-object-damage in aerospace, and light-weight armor. Increased utilization of these material classes under dynamic loading conditions requires an understanding of the relationship between high-rate/shock-wave response as a function of microstructure if we are to develop models to predict material behavior. In this paper the issues relevantmore » to defect generation, storage, and the underlying physical basis needed in predictive models for several advanced materials will be reviewed.« less

Multiscale image contrast amplification (MUSICA)

NASA Astrophysics Data System (ADS)

Vuylsteke, Pieter; Schoeters, Emile P.

1994-05-01

This article presents a novel approach to the problem of detail contrast enhancement, based on multiresolution representation of the original image. The image is decomposed into a weighted sum of smooth, localized, 2D basis functions at multiple scales. Each transform coefficient represents the amount of local detail at some specific scale and at a specific position in the image. Detail contrast is enhanced by non-linear amplification of the transform coefficients. An inverse transform is then applied to the modified coefficients. This yields a uniformly contrast- enhanced image without artefacts. The MUSICA-algorithm is being applied routinely to computed radiography images of chest, skull, spine, shoulder, pelvis, extremities, and abdomen examinations, with excellent acceptance. It is useful for a wide range of applications in the medical, graphical, and industrial area.

Biosynthesis of Novel Exopolymers by Aureobasidium pullulans

PubMed Central

Lee, Jin W.; Yeomans, Walter G.; Allen, Alfred L.; Deng, Fang; Gross, Richard A.; Kaplan, David L.

1999-01-01

Aureobasidium pullulans ATCC 42023 was cultured under aerobic conditions with glucose, mannose, and glucose analogs as energy sources. The exopolymer extracts produced under these conditions were composed of glucose and mannose. The molar ratio of glucose to mannose in the exopolymer extract and the molecular weight of the exopolymer varied depending on the energy source and culture time. The glucose content of exopolymer extracts formed with glucose and mannose as the carbon sources was between 91 and 87%. The molecular weight decreased from 3.5 × 106 to 2.12 × 106 to 0.85 × 106 to 0.77 × 106 with culture time. As the culture time increased, the glucose content of the exopolymer extract formed with glucosamine decreased from 55 ± 3 to 29 ± 2 mol%, and the molecular weight increased from 2.73 × 106 to 4.86 × 106. There was no evidence that glucosamine was directly incorporated into exopolymers. The molar ratios of glucose to mannose in exopolymer extracts ranged from 87 ± 3:13 ± 3 to 28 ± 2:72 ± 2 and were affected by the energy source added. On the basis of the results of an enzyme hydrolysis analysis of the exopolymer extracts and the compositional changes observed, mannose (a repeating unit) was substituted for glucose, which gave rise to a new family of exopolymer analogs. PMID:10583975

The Morphology of Emulsion Polymerized Latex Particles

DOE R&D Accomplishments Database

Wignall, G. D.; Ramakrishnan, V. R.; Linne, M. A.; Klein, A.; Sperling, L. H.; Wai, M. P.; Gelman, R. A.; Fatica, M. G.; Hoerl, R. H.; Fisher, L. W.

1987-11-01

Under monomer starved feed conditions, emulsion polymerization of perdeuterated methyl methacrylate and styrene in the presence of preformed polymethylmethacrylate latexes resulted in particles with a core-shell morphology, as determined by small-angle neutron scattering (SANS) analysis for a hollow sphere. The locus of polymerization of the added deuterated monomer is therefore at the particle surface. In similar measurements a statistical copolymer of styrene and methyl methacrylate was used as seed particles for further polymerization of trideuteromethyl methacrylate. The resulting polymer latex was again shown to have a core-shell morphological structure as determined by SANS. SANS experiments were also undertaken on polystyrene latexes polymerized by equilibrium swelling methods, with deuterated polymer forming the first or second step. The experiments covered a molecular weight range of 6 x 10{sup 4} 10{sup 6} the molecular weights are consistent with the experimental errors, indicating that the deuterium labeled molecules are randomly distributed in the latex. These results led to the finding that the polymer chains were constrained in the latex particles by factors of 2 to 4 from the relaxed coil dimensions. For M < 10{sup 6} g/mol SANS gave zero angle scattering intensities much higher than expected on the basis of a random distribution of labeled molecules. Several models were examined, including the possible development of core-shell structures at lower molecular weights.

Simple and efficient LCAO basis sets for the diffuse states in carbon nanostructures.

PubMed

Papior, Nick R; Calogero, Gaetano; Brandbyge, Mads

2018-06-27

We present a simple way to describe the lowest unoccupied diffuse states in carbon nanostructures in density functional theory calculations using a minimal LCAO (linear combination of atomic orbitals) basis set. By comparing plane wave basis calculations, we show how these states can be captured by adding long-range orbitals to the standard LCAO basis sets for the extreme cases of planar sp 2 (graphene) and curved carbon (C 60 ). In particular, using Bessel functions with a long range as additional basis functions retain a minimal basis size. This provides a smaller and simpler atom-centered basis set compared to the standard pseudo-atomic orbitals (PAOs) with multiple polarization orbitals or by adding non-atom-centered states to the basis.

Simple and efficient LCAO basis sets for the diffuse states in carbon nanostructures

NASA Astrophysics Data System (ADS)

Papior, Nick R.; Calogero, Gaetano; Brandbyge, Mads

2018-06-01

We present a simple way to describe the lowest unoccupied diffuse states in carbon nanostructures in density functional theory calculations using a minimal LCAO (linear combination of atomic orbitals) basis set. By comparing plane wave basis calculations, we show how these states can be captured by adding long-range orbitals to the standard LCAO basis sets for the extreme cases of planar sp 2 (graphene) and curved carbon (C60). In particular, using Bessel functions with a long range as additional basis functions retain a minimal basis size. This provides a smaller and simpler atom-centered basis set compared to the standard pseudo-atomic orbitals (PAOs) with multiple polarization orbitals or by adding non-atom-centered states to the basis.

An objective approach to determining the weight ranges of prey preferred by and accessible to the five large African carnivores.

PubMed

Clements, Hayley S; Tambling, Craig J; Hayward, Matt W; Kerley, Graham I H

2014-01-01

Broad-scale models describing predator prey preferences serve as useful departure points for understanding predator-prey interactions at finer scales. Previous analyses used a subjective approach to identify prey weight preferences of the five large African carnivores, hence their accuracy is questionable. This study uses a segmented model of prey weight versus prey preference to objectively quantify the prey weight preferences of the five large African carnivores. Based on simulations of known predator prey preference, for prey species sample sizes above 32 the segmented model approach detects up to four known changes in prey weight preference (represented by model break-points) with high rates of detection (75% to 100% of simulations, depending on number of break-points) and accuracy (within 1.3±4.0 to 2.7±4.4 of known break-point). When applied to the five large African carnivores, using carnivore diet information from across Africa, the model detected weight ranges of prey that are preferred, killed relative to their abundance, and avoided by each carnivore. Prey in the weight ranges preferred and killed relative to their abundance are together termed "accessible prey". Accessible prey weight ranges were found to be 14-135 kg for cheetah Acinonyx jubatus, 1-45 kg for leopard Panthera pardus, 32-632 kg for lion Panthera leo, 15-1600 kg for spotted hyaena Crocuta crocuta and 10-289 kg for wild dog Lycaon pictus. An assessment of carnivore diets throughout Africa found these accessible prey weight ranges include 88±2% (cheetah), 82±3% (leopard), 81±2% (lion), 97±2% (spotted hyaena) and 96±2% (wild dog) of kills. These descriptions of prey weight preferences therefore contribute to our understanding of the diet spectrum of the five large African carnivores. Where datasets meet the minimum sample size requirements, the segmented model approach provides a means of determining, and comparing, the prey weight range preferences of any carnivore species.

Dynamic energy-balance model predicting gestational weight gain

USDA-ARS?s Scientific Manuscript database

Gestational weight gains (GWGs) that exceed the 2009 Institute of Medicine recommended ranges increase risk of long-term postpartum weight retention; conversely, GWGs within the recommended ranges are more likely to result in positive maternal and fetal outcomes. Despite this evidence, recent epide...

Distribution of Structural Weight of Wing Along the Span

NASA Technical Reports Server (NTRS)

Savelyev, V. V.

1946-01-01

In the present report the true weight distribution law of the wing structure along the span is investigated. It is shown that the triangular distribution and that based on the proportionality to the chords do not correspond to the actual weight distribution, On the basis of extensive data on wings of the CAHI type airplane formulas are obtained from which it is possible to determine the true diagram of the structural weight distribution along the span from a knowledge of only the geometrical dimensions of the wing. At the end of the paper data are presented showing how the structural weight is distributed between the straight center portion and the tapered portion as a function of their areas.

Total dietary fiber composition of diets used for management of obesity and diabetes mellitus in cats.

PubMed

Owens, Tammy J; Larsen, Jennifer A; Farcas, Amy K; Nelson, Richard W; Kass, Philip H; Fascetti, Andrea J

2014-07-01

To determine total dietary fiber (TDF) composition of feline diets used for management of obesity and diabetes mellitus. Cross-sectional survey. Dry veterinary (n = 10), canned veterinary (12), and canned over-the-counter (3) feline diets. Percentage of TDF as insoluble dietary fiber (IDF), high-molecular-weight soluble dietary fiber (HMWSDF), and low-molecular-weight soluble dietary fiber (LMWSDF) was determined. Median measured TDF concentration was greater than reported maximum crude fiber content in dry and canned diets. Median TDF (dry-matter) concentration in dry and canned diets was 12.2% (range, 8.11% to 27.16%) and 13.8% (range, 4.7% to 27.9%), respectively. Dry and canned diets, and diets with and without a source of oligosaccharides in the ingredient list, were not different in energy density or concentrations of TDF, IDF, HMWSDF, or LMWSDF. Similarly, loaf-type (n = 11) and gravy-type (4) canned diets differed only in LMWSDF concentration. Disparities in TDF concentrations among products existed despite a lack of differences among groups. Limited differences in TDF concentration and dietary fiber composition were detected when diets were compared on the basis of carbohydrate concentration. Diets labeled for management of obesity were higher in TDF concentration and lower in energy density than diets for management of diabetes mellitus. Diets provided a range of TDF concentrations with variable concentrations of IDF, HMWSDF, and LMWSDF. Crude fiber concentration was not a reliable indicator of TDF concentration or dietary fiber composition. Because carbohydrate content is calculated as a difference, results suggested that use of crude fiber content would cause overestimation of both carbohydrate and energy content of diets.

Factors influencing to earthquake caused economical losses on urban territories

NASA Astrophysics Data System (ADS)

Nurtaev, B.; Khakimov, S.

2005-12-01

Questions of assessment of earthquake economical losses on urban territories of Uzbekistan, taking into account damage forming factors, which are increqasing or reducing economical losses were discussed in the paper. Buildings and facilities vulnerability factors were classified. From total value (equal to 50) were selected most important ones. Factors ranging by level of impact and weight function in loss assessment were ranged. One group of damage forming factors includs seismic hazard assessment, design, construction and maintenance of building and facilities. Other one is formed by city planning characteristics and includes : density of constructions and population, area of soft soils, existence of liquefaction susceptible soils and etc. To all these factors has been given weight functions and interval values by groups. Methodical recomendations for loss asessment taking into account above mentioned factors were developed. It gives possibility to carry out preventive measures for protection of vulnerable territories, to differentiate cost assessment of each region in relation with territory peculiarity and damage value. Using developed method we have ranged cities by risk level. It has allowed to establish ratings of the general vulnerability of urban territories of cities and on their basis to make optimum decisions, oriented to loss mitigation and increase of safety of population. Besides the technique can be used by insurance companies for estimated zoning of territory, development of effective utilization schema of land resources, rational town-planning, an economic estimation of used territory for supply with information of the various works connected to an estimation of seismic hazard. Further improvement of technique of establishment of rating of cities by level of damage from earthquakes will allow to increase quality of construction, rationality of accommodation of buildings, will be an economic stimulator for increasing of seismic resistance of building.

Meshless Local Petrov-Galerkin Euler-Bernoulli Beam Problems: A Radial Basis Function Approach

NASA Technical Reports Server (NTRS)

Raju, I. S.; Phillips, D. R.; Krishnamurthy, T.

2003-01-01

A radial basis function implementation of the meshless local Petrov-Galerkin (MLPG) method is presented to study Euler-Bernoulli beam problems. Radial basis functions, rather than generalized moving least squares (GMLS) interpolations, are used to develop the trial functions. This choice yields a computationally simpler method as fewer matrix inversions and multiplications are required than when GMLS interpolations are used. Test functions are chosen as simple weight functions as in the conventional MLPG method. Compactly and noncompactly supported radial basis functions are considered. The non-compactly supported cubic radial basis function is found to perform very well. Results obtained from the radial basis MLPG method are comparable to those obtained using the conventional MLPG method for mixed boundary value problems and problems with discontinuous loading conditions.

19 CFR Annex V to Part 351 - Comparison of Prior and New Regulations

Code of Federal Regulations, 2010 CFR

2010-04-01

... weighted-average dumping margin Subpart B—Antidumping Duty Procedures 353.11 351.201 Self-initiation 353.12... Verification 353.37 351.308 Determination on the basis of the facts available 353.38 (a)-(e) 351.309 Written... 355.35 Removed Ex parte meeting 355.36 351.307 Verification 355.37 351.308 Determinations on the basis...

Electrolytes for Low Impedance, Wide Operating Temperature Range Lithium-Ion Battery Module

NASA Technical Reports Server (NTRS)

Hallac, Boutros (Inventor); Krause, Frederick C. (Inventor); Jiang, Junwei (Inventor); Smart, Marshall C. (Inventor); Metz, Bernhard M. (Inventor); Bugga, Ratnakumar V. (Inventor)

2018-01-01

A lithium ion battery cell includes a housing, a cathode disposed within the housing, wherein the cathode comprises a cathode active material, an anode disposed within the housing, wherein the anode comprises an anode active material, and an electrolyte disposed within the housing and in contact with the cathode and anode. The electrolyte consists essentially of a solvent mixture, a lithium salt in a concentration ranging from approximately 1.0 molar (M) to approximately 1.6 M, and an additive mixture. The solvent mixture includes a cyclic carbonate, an non-cyclic carbonate, and a linear ester. The additive mixture consists essentially of lithium difluoro(oxalato)borate (LiDFOB) in an amount ranging from approximately 0.5 weight percent to approximately 2.0 weight percent based on the weight of the electrolyte, and vinylene carbonate (VC) in an amount ranging from approximately 0.5 weight percent to approximately 2.0 weight percent based on the weight of the electrolyte.

Effects of weighting schemes on the identification of wildlife corridors generated with least-cost methods.

PubMed

Parks, Sean A; McKelvey, Kevin S; Schwartz, Michael K

2013-02-01

The importance of movement corridors for maintaining connectivity within metapopulations of wild animals is a cornerstone of conservation. One common approach for determining corridor locations is least-cost corridor (LCC) modeling, which uses algorithms within a geographic information system to search for routes with the lowest cumulative resistance between target locations on a landscape. However, the presentation of multiple LCCs that connect multiple locations generally assumes all corridors contribute equally to connectivity, regardless of the likelihood that animals will use them. Thus, LCCs may overemphasize seldom-used longer routes and underemphasize more frequently used shorter routes. We hypothesize that, depending on conservation objectives and available biological information, weighting individual corridors on the basis of species-specific movement, dispersal, or gene flow data may better identify effective corridors. We tested whether locations of key connectivity areas, defined as the highest 75th and 90th percentile cumulative weighted value of approximately 155,000 corridors, shift under different weighting scenarios. In addition, we quantified the amount and location of private land that intersect key connectivity areas under each weighting scheme. Some areas that appeared well connected when analyzed with unweighted corridors exhibited much less connectivity compared with weighting schemes that discount corridors with large effective distances. Furthermore, the amount and location of key connectivity areas that intersected private land varied among weighting schemes. We believe biological assumptions and conservation objectives should be explicitly incorporated to weight corridors when assessing landscape connectivity. These results are highly relevant to conservation planning because on the basis of recent interest by government agencies and nongovernmental organizations in maintaining and enhancing wildlife corridors, connectivity will likely be an important criterion for prioritization of land purchases and swaps. ©2012 Society for Conservation Biology.

Multivariate linear regression analysis to identify general factors for quantitative predictions of implant stability quotient values

PubMed Central

Huang, Hairong; Xu, Zanzan; Shao, Xianhong; Wismeijer, Daniel; Sun, Ping; Wang, Jingxiao

2017-01-01

Objectives This study identified potential general influencing factors for a mathematical prediction of implant stability quotient (ISQ) values in clinical practice. Methods We collected the ISQ values of 557 implants from 2 different brands (SICace and Osstem) placed by 2 surgeons in 336 patients. Surgeon 1 placed 329 SICace implants, and surgeon 2 placed 113 SICace implants and 115 Osstem implants. ISQ measurements were taken at T1 (immediately after implant placement) and T2 (before dental restoration). A multivariate linear regression model was used to analyze the influence of the following 11 candidate factors for stability prediction: sex, age, maxillary/mandibular location, bone type, immediate/delayed implantation, bone grafting, insertion torque, I-stage or II-stage healing pattern, implant diameter, implant length and T1-T2 time interval. Results The need for bone grafting as a predictor significantly influenced ISQ values in all three groups at T1 (weight coefficients ranging from -4 to -5). In contrast, implant diameter consistently influenced the ISQ values in all three groups at T2 (weight coefficients ranging from 3.4 to 4.2). Other factors, such as sex, age, I/II-stage implantation and bone type, did not significantly influence ISQ values at T2, and implant length did not significantly influence ISQ values at T1 or T2. Conclusions These findings provide a rational basis for mathematical models to quantitatively predict the ISQ values of implants in clinical practice. PMID:29084260

Low-molecular-weight heparins: pharmacologic profile and product differentiation.

PubMed

Fareed, J; Jeske, W; Hoppensteadt, D; Clarizio, R; Walenga, J M

1998-09-10

The interchangeability of low-molecular-weight heparins (LMWHs) has been the subject of discussion since these products were first introduced for the prophylaxis of deep vein thrombosis. Experimental evidence now exists to show that LMWHs differ from each other in a number of characteristics. Products have been differentiated on the basis of molecular weight and biologic properties, but only limited information derived from the clinical setting is available. Potency has been described on the basis of anti-Factor Xa activity, but at equivalent anti-Xa activities, the anti-Factor IIa activity of different products shows marked variations. At the relatively small doses used for the management of postsurgical deep vein thrombosis, the effect of these interproduct differences may be relatively minor, but as LMWHs are developed for therapeutic use at much higher doses, such differences may become clinically important. Variations in safety and efficacy reported in clinical trials of LMWHs may reflect the known differences in their molecular composition and pharmacologic properties.

[Contraindications to weight reduction].

PubMed

Heini, A

2000-08-01

It is relatively well accepted that weight gain, even within the range of normal weight, is detrimental for health. The claimed long-term benefit of intentional weight loss is mainly based on a few observational trials, confounding intentional and non-intentional weight loss. The few data on obesity-related diseases prevented by intentional weight reduction have not been replicated. Thus, for lack of level-one evidence it is to date doubtful whether voluntary weight loss should be intensively recommended to obese individuals rather than other lifestyle-interventions, e.g. exercise training. The aim of this overview is to discuss some of the contraindications to intentional weight loss often ignored in recent debates. There is no intention to question the increased risk of overweight on morbidity and the need for preventing weight gain in our population. Besides well-known consequences secondary to rapid weight loss, e.g. gallstones and electrolyte disorders, some new aspects or more debated issues are discussed. Recent compelling data indicate a significant bone density loss after weight loss of a few kilograms. Knowledge on the impact of weight cycling mainly relies on cross-sectional data. So far there is no concluding evidence of adverse pathophysiological effects from weight cycling. Repeated dieting has been associated with eating disorders, although the cause-effect relationship has not been well established. At least on an empirical basis there seems to be a tolerance effect after repeated weight losing efforts. Pharmacotherapy tends more and more to be part of weight loss interventions. Although the currently available drugs are designed for long-term treatment, in practice they are rarely used longer than a few months, and therefore their use can be entirely questioned. Nonetheless, if employed properly for weight loss and weight maintenance, i.e. "for life", additional data on long-term effects on health are needed. Such risks can then be weighed against the risk of remaining obese. Even a limited detrimental effect on blood pressure, such as known for sibutramine, could compromise the beneficial effect of the drug on weight loss and maintenance. Further, the financial burden of weight loss is not to be underestimated. Besides diets and weight loss programs being a multi billion dollar business, the cost of patient care in cases of surgery for gallstones has, among other economic implications, to be considered. Finally, with the example of the recently investigated impact of fitness level on health, exercise training may be an alternative to weight loss. Whether obese or not, cardiovascular fitness is a strong, independent predictor of cardiovascular mortality and overall mortality. Most obese being unfit, a greater preventive impact might come from becoming more fit than from losing weight. This should only illustrate that there is still a long way to go until we have sufficient scientific data to be able to tell whether in the management of obesity weight loss or other interventions are of higher priority. In part, current recommendations to lose weight are biased by societal pressure, which overrules simple scientific evidence.

Analysis of biweight site chronologies: relative weights of individual trees over time

Treesearch

Kurt H. Riitters

1990-01-01

The relative weights on individual trees in a biweight site chronology can indicate the consistency of tree growth responses to macroclimate and can be the basis for stratifying trees in climate-growth analyses. This was explored with 45 years of ring-width indices for 200 trees from five even-aged jack pine (Pinus hanksiana Lamb.) stands. Average individual-tree...

49 CFR 375.521 - What must I do if an individual shipper wants to know the actual weight or charges for a shipment...

Code of Federal Regulations, 2010 CFR

2010-10-01

... transmissions; e-mail; overnight courier; or certified mail, return receipt requested. (b) The individual... transported on a collect-on-delivery basis specifically requests notification of the actual weight or volume... weighed (i.e., weighed at destination). (2) Pickup and delivery encompass two consecutive weekdays, if the...

Coated armor system and process for making the same

DOEpatents

Chu, Henry S.; Lillo, Thomas M.; McHugh, Kevin M.

2010-11-23

An armor system and method involves providing a core material and a stream of atomized coating material that comprises a liquid fraction and a solid fraction. An initial layer is deposited on the core material by positioning the core material in the stream of atomized coating material wherein the solid fraction of the stream of atomized coating material is less than the liquid fraction of the stream of atomized coating material on a weight basis. An outer layer is then deposited on the initial layer by positioning the core material in the stream of atomized coating material wherein the solid fraction of the stream of atomized coating material is greater than the liquid fraction of the stream of atomized coating material on a weight basis.

Armor systems including coated core materials

DOEpatents

Chu, Henry S [Idaho Falls, ID; Lillo, Thomas M [Idaho Falls, ID; McHugh, Kevin M [Idaho Falls, ID

2012-07-31

An armor system and method involves providing a core material and a stream of atomized coating material that comprises a liquid fraction and a solid fraction. An initial layer is deposited on the core material by positioning the core material in the stream of atomized coating material wherein the solid fraction of the stream of atomized coating material is less than the liquid fraction of the stream of atomized coating material on a weight basis. An outer layer is then deposited on the initial layer by positioning the core material in the stream of atomized coating material wherein the solid fraction of the stream of atomized coating material is greater than the liquid fraction of the stream of atomized coating material on a weight basis.

Armor systems including coated core materials

DOEpatents

Chu, Henry S; Lillo, Thomas M; McHugh, Kevin M

2013-10-08

An armor system and method involves providing a core material and a stream of atomized coating material that comprises a liquid fraction and a solid fraction. An initial layer is deposited on the core material by positioning the core material in the stream of atomized coating material wherein the solid fraction of the stream of atomized coating material is less than the liquid fraction of the stream of atomized coating material on a weight basis. An outer layer is then deposited on the initial layer by positioning the core material in the stream of atomized coating material wherein the solid fraction of the stream of atomized coating material is greater than the liquid fraction of the stream of atomized coating material on a weight basis.

Bioaccumulation of Zn, Cu and Mn in the caviar and muscle of Persian sturgeon (Acipenser persicus) from the Caspian Sea, Iran.

PubMed

Mashroofeh, Abdulreza; Bakhtiari, Alireza Riyahi; Pourkazemi, Mohammad

2012-12-01

Concentrations of Zn, Cu and Mn were examined in caviar and muscle of the Persian sturgeon (Acipenser persicus) collected from coastal waters of south Caspian Sea during March and April, 2011. Mean Zn, Cu and Mn concentrations in caviar samples were 21.48, 2.05 and 1.66 μg g(-1) wet weight basis, respectively. The mean Zn, Cu and Mn concentrations in muscle tissues were 7.49, 1.00 and 0.34 μg g(-1) wet weight basis, respectively. The mean concentrations of Zn and Cu in caviar and muscle samples were under the permissible limits proposed by the United Kingdom's Ministry of Agriculture, Fisheries and Food (2000).

[Gestational weight gain and optimal ranges in Chinese mothers giving singleton and full-term births in 2013].

PubMed

Wang, J; Duan, Y F; Pang, X H; Jiang, S; Yin, S A; Yang, Z Y; Lai, J Q

2018-01-06

Objective: To analyze the status of gestational weight gain (GWG) among Chinese mothers who gave singleton and full-term births, and to look at optimal GWG ranges. Methods: In 2013, using the multi-stage stratified and population proportional cluster sampling method, we investigated 8 323 mother-child pairs at their 0-24 months postpartum from 55 counties (cities/districts) of 30 provinces (except Tibet) in mainland China. Questionnaire was used to collect data on body weight before pregnancy and delivery, diseases during gestation, hemorrhage or not at postpartum, child birth weight and length, and other information about pregnant outcomes. We measured mother's body weight and height, and child's body weight and length. Based on 'Chinese Adult Body Weight Standard', we divided mothers into four groups according to their body weight before pregnancy: low weight (BMI<18.5 kg/m(2)), normal weight (BMI 18.5-23.9 kg/m(2)), overweight (BMI 24.0-27.9 kg/m(2)) and obesity (BMI≥28.0 kg/m(2)). The status of GWG was assessed by IOM optimal GWG guidelines. Chinese optimal GWG ranges were calculated according to the association of GWG with pregnant outcomes and anthropometry of mothers and children, and according to P25-P75 of GWG among mothers who had good pregnant outcomes and good anthropometry, and whose children had good anthropometry. The status of GWG was assessed by the new optimal ranges. Results: P50 (P25-P75) of GWG among the 8 323 mothers was 15.0 (10.0-19.0) kg. According to the proposed optimal GWG ranges of IOM, the proportions of inadequate, optimal and excessive GWG accounted for 27.2% (2 263 mothers), 36.2% (3 016 mothers) and 36.6% (3 044 mothers). The optimal GWG ranges for low weight, normal weight, overweight and obesity were 11.5-18.0, 10.0-15.0, 8.0-14.0 and 5.0-11.5 kg. Based on these optimal GWG ranges established in this study, the rates of inadequate, optimal and excessive GWG were 15.7% (1 303 mothers), 45.0% (3 744 mothers) and 39.3% (3 276 mothers), and these rates were significantly different from that defined by the IOM standards (χ2=345.36, P<0.001). Conclusion: The median of GWG among Chinese mothers is 15.0 kg, which is at a relatively higher level. This study suggests the optimal GWG ranges for Chinese women who give singleton and full-term babies, which appears lower than IOM's.

Isolated step-down DC -DC converter for electric vehicles

NASA Astrophysics Data System (ADS)

Kukovinets, O. V.; Sidorov, K. M.; Yutt, V. E.

2018-02-01

Modern motor-vehicle industrial sector is moving rapidly now towards the electricity-driving cars production, improving their range and efficiency of components, and in particular the step-down DC/DC converter to supply the onboard circuit 12/24V of electric vehicle from the high-voltage battery. The purpose of this article - to identify the best circuitry topology to design an advanced step-down DC/DC converters with the smallest mass, volume, highest efficiency and power. And this will have a positive effect on driving distance of electric vehicle (EV). On the basis of computational research of existing and implemented circuit topologies of step-down DC/DC converters (serial resonant converter, full bridge with phase-shifting converter, LLC resonant converter) a comprehensive analysis was carried out on the following characteristics: specific volume, specific weight, power, efficiency. The data obtained was the basis for the best technical option - LLC resonant converter. The results can serve as a guide material in the process of components design of the traction equipment for electric vehicles, providing for the best technical solutions in the design and manufacturing of converting equipment, self-contained power supply systems and advanced driver assistance systems.

A fuel conservation study for transport aircraft utilizing advanced technology and hydrogen fuel

NASA Technical Reports Server (NTRS)

Berry, W.; Calleson, R.; Espil, J.; Quartero, C.; Swanson, E.

1972-01-01

The conservation of fossil fuels in commercial aviation was investigated. Four categories of aircraft were selected for investigation: (1) conventional, medium range, low take-off gross weight; (2) conventional, long range, high take-off gross weights; (3) large take-off gross weight aircraft that might find future applications using both conventional and advanced technology; and (4) advanced technology aircraft of the future powered with liquid hydrogen fuel. It is concluded that the hydrogen fueled aircraft can perform at reduced size and gross weight the same payload/range mission as conventionally fueled aircraft.

7 CFR 993.56 - Reserve obligation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE DRIED PRUNES PRODUCED IN CALIFORNIA... dehydrators plus that diverted tonnage (dried weight natural condition prune basis) on diversion certificates...

7 CFR 993.56 - Reserve obligation.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE DRIED PRUNES PRODUCED IN CALIFORNIA... dehydrators plus that diverted tonnage (dried weight natural condition prune basis) on diversion certificates...

7 CFR 993.56 - Reserve obligation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE DRIED PRUNES PRODUCED IN CALIFORNIA... dehydrators plus that diverted tonnage (dried weight natural condition prune basis) on diversion certificates...

7 CFR 993.56 - Reserve obligation.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE DRIED PRUNES PRODUCED IN CALIFORNIA... dehydrators plus that diverted tonnage (dried weight natural condition prune basis) on diversion certificates...

7 CFR 993.56 - Reserve obligation.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE DRIED PRUNES PRODUCED IN CALIFORNIA... dehydrators plus that diverted tonnage (dried weight natural condition prune basis) on diversion certificates...

Weighted Iterative Bayesian Compressive Sensing (WIBCS) for High Dimensional Polynomial Surrogate Construction

NASA Astrophysics Data System (ADS)

Sargsyan, K.; Ricciuto, D. M.; Safta, C.; Debusschere, B.; Najm, H. N.; Thornton, P. E.

2016-12-01

Surrogate construction has become a routine procedure when facing computationally intensive studies requiring multiple evaluations of complex models. In particular, surrogate models, otherwise called emulators or response surfaces, replace complex models in uncertainty quantification (UQ) studies, including uncertainty propagation (forward UQ) and parameter estimation (inverse UQ). Further, surrogates based on Polynomial Chaos (PC) expansions are especially convenient for forward UQ and global sensitivity analysis, also known as variance-based decomposition. However, the PC surrogate construction strongly suffers from the curse of dimensionality. With a large number of input parameters, the number of model simulations required for accurate surrogate construction is prohibitively large. Relatedly, non-adaptive PC expansions typically include infeasibly large number of basis terms far exceeding the number of available model evaluations. We develop Weighted Iterative Bayesian Compressive Sensing (WIBCS) algorithm for adaptive basis growth and PC surrogate construction leading to a sparse, high-dimensional PC surrogate with a very few model evaluations. The surrogate is then readily employed for global sensitivity analysis leading to further dimensionality reduction. Besides numerical tests, we demonstrate the construction on the example of Accelerated Climate Model for Energy (ACME) Land Model for several output QoIs at nearly 100 FLUXNET sites covering multiple plant functional types and climates, varying 65 input parameters over broad ranges of possible values. This work is supported by the U.S. Department of Energy, Office of Science, Biological and Environmental Research, Accelerated Climate Modeling for Energy (ACME) project. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

Microbial conversion of low-rank coal: characterization of biodegraded product

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, B.W.; Bean, R.M.; Franz, J.A.

The authors have characterized products obtained from the action of the fungus Polyporus versicolor on oxidized North Dakota (ND) lignite. These analyses showed that, compared to feed coal, the bioconverted materials had higher hydrogen:carbon and oxygen:carbon ratios, but were proportionately lower in aliphatic hydrogen, as determined by infrared (IR) spectroscopy. The acid-precipitated extract was dissolved in dilute base and analyzed by /sup 13/C nuclear magnetic resonance (NMR) spectroscopy. Of the 60% of the carbon accounted for, approximately 51% of the carbon atoms were aromatic, 20% were assigned to carboxylic acid groups, and the remainder were aliphatic carbon. Proton NMR spectramore » of the acid-precipitated material revealed approximately equal proportions of aromatic and aliphatic hydrogen. The bioconverted materials were highly polar and exhibited a wide range in apparent molecular weight; most material was over 10,000 Da at acidic pH, as determined by ultrafiltration experiments. Freeze-dried product material was soluble in water but was essentially insoluble in other organic solvents. Calorimetric measurements on samples of the freeze-dried extract showed that, on a per-weight basis, it retained 94-97% of the heating value of the feed coal. 12 references, 5 figures, 2 tables.« less

Heavy metal, total arsenic, and inorganic arsenic contents of algae food products.

PubMed

Almela, C; Algora, S; Benito, V; Clemente, M J; Devesa, V; Súñer, M A; Vélez, D; Montoro, R

2002-02-13

The total arsenic, inorganic arsenic, lead, cadmium, and mercury contents of 18 algae food products currently on sale in Spain were determined. The suitability of the analytical methodologies for this type of matrix was confirmed by evaluating their analytical characteristics. The concentration ranges found for each contaminant, expressed in milligrams per kilogram of dry weight, were as follows: total arsenic, 2.3-141; inorganic arsenic, 0.15-88; lead, < 0.05-1.33; cadmium, 0.03-1.9; and mercury, 0.004-0.04. There is currently no legislation in Spain regarding contaminants in algae food products, but some of the samples analyzed revealed Cd and inorganic As levels higher than those permitted by legislation in other countries. Given the high concentrations of inorganic As found in Hizikia fusiforme, a daily consumption of 1.7 g of the product would reach the Provisional Tolerable Weekly Intake recommended by the WHO for an average body weight of 68 kg. A more comprehensive study of the contents and toxicological implications of the inorganic As present in the algae food products currently sold in Spain may be necessary, which might then be the basis for the introduction of specific sales restrictions.

Physical-chemical and biological characterization of different preparations of equine chorionic gonadotropin

PubMed Central

Natal, Fabio Luis Nogueira; Ribela, Maria Teresa Carvalho Pinto; de Almeida, Beatriz Elane; de Oliveira, João Ezequiel; Bartolini, Paolo

2016-01-01

Ovarian stimulation with commercial preparations of equine chorionic gonadotropin (eCG) produces extremely variable responses in domestic animals, ranging from excessive stimulation to practically no stimulation, when applied on the basis of their declared unitage. This study was conducted to analyze four commercial preparations from different manufacturers via reversed-phase HPLC (RP-HPLC) in comparison with a reference preparation and an official International Standard from the World Health Organization. The peaks obtained by this qualitative and quantitative physical–chemical analysis were compared using an in vivo bioassay based on the ovarian weight gain of prepubertal female rats. The RP-HPLC data showed one or two peaks close to a main peak (tR = 27.9 min), which were related to the in vivo bioactivity. Commercial preparations that have this altered peak showed very little or no in vivo activity, as demonstrated by rat ovarian weight and in peripubertal gilts induced to ovulate. Overall, these findings indicate that RP-HPLC can be a rapid and reliable tool to reveal changes in the physicochemical profile of commercial eCG that is apparently related to decreased biological activity of this hormone. PMID:27297410

Strong influence of variable treatment on the performance of numerically defined ecological regions.

PubMed

Snelder, Ton; Lehmann, Anthony; Lamouroux, Nicolas; Leathwick, John; Allenbach, Karin

2009-10-01

Numerical clustering has frequently been used to define hierarchically organized ecological regionalizations, but there has been little robust evaluation of their performance (i.e., the degree to which regions discriminate areas with similar ecological character). In this study we investigated the effect of the weighting and treatment of input variables on the performance of regionalizations defined by agglomerative clustering across a range of hierarchical levels. For this purpose, we developed three ecological regionalizations of Switzerland of increasing complexity using agglomerative clustering. Environmental data for our analysis were drawn from a 400 m grid and consisted of estimates of 11 environmental variables for each grid cell describing climate, topography and lithology. Regionalization 1 was defined from the environmental variables which were given equal weights. We used the same variables in Regionalization 2 but weighted and transformed them on the basis of a dissimilarity model that was fitted to land cover composition data derived for a random sample of cells from interpretation of aerial photographs. Regionalization 3 was a further two-stage development of Regionalization 2 where specific classifications, also weighted and transformed using dissimilarity models, were applied to 25 small scale "sub-domains" defined by Regionalization 2. Performance was assessed in terms of the discrimination of land cover composition for an independent set of sites using classification strength (CS), which measured the similarity of land cover composition within classes and the dissimilarity between classes. Regionalization 2 performed significantly better than Regionalization 1, but the largest gains in performance, compared to Regionalization 1, occurred at coarse hierarchical levels (i.e., CS did not increase significantly beyond the 25-region level). Regionalization 3 performed better than Regionalization 2 beyond the 25-region level and CS values continued to increase to the 95-region level. The results show that the performance of regionalizations defined by agglomerative clustering are sensitive to variable weighting and transformation. We conclude that large gains in performance can be achieved by training classifications using dissimilarity models. However, these gains are restricted to a narrow range of hierarchical levels because agglomerative clustering is unable to represent the variation in importance of variables at different spatial scales. We suggest that further advances in the numerical definition of hierarchically organized ecological regionalizations will be possible with techniques developed in the field of statistical modeling of the distribution of community composition.

Amino acid, mineral and fatty acid content of pumpkin seeds (Cucurbita spp) and Cyperus esculentus nuts in the Republic of Niger.

PubMed

Glew, R H; Glew, R S; Chuang, L-T; Huang, Y-S; Millson, M; Constans, D; Vanderjagt, D J

2006-06-01

Dried seeds and nuts are widely consumed by indigenous populations of the western Sahel, especially those who inhabit rural areas. In light of the need for quantitative information regarding the content of particular nutrients in these plant foods, we collected dried pumpkin (Cucurbita spp) seeds and nuts of Cyperus esculentus in the Republic of Niger and analyzed them for their content of essential amino acids, minerals and trace elements, and fatty acids. On a dry weight basis, pumpkin seed contained 58.8% protein and 29.8% fat. However, the lysine score of the protein was only 65% relative to the FAO/WHO protein standard. The pumpkin seed contained useful amounts of linoleic (92 microg/g dry weight) and the following elements (on a microg per g dry weight basis): potassium (5,790), magnesium (5,690), manganese (49.3), zinc (113), selenium (1.29), copper (15.4), chromium (2.84), and molybdenum (0.81), but low amounts of calcium and iron. Except for potassium (5,573 microg/g dry weight) and chromium (2.88 microg/g dry weight), the C. esculentis nuts contained much less of these same nutrients compared to pumpkin seeds. In conclusion, pumpkin seeds represent a useful source of many nutrients essential to humans. The data in this report should of practical value to public health officials in rural areas of sub-Saharan Africa.

Construction of energy-stable Galerkin reduced order models.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kalashnikova, Irina; Barone, Matthew Franklin; Arunajatesan, Srinivasan

2013-05-01

This report aims to unify several approaches for building stable projection-based reduced order models (ROMs). Attention is focused on linear time-invariant (LTI) systems. The model reduction procedure consists of two steps: the computation of a reduced basis, and the projection of the governing partial differential equations (PDEs) onto this reduced basis. Two kinds of reduced bases are considered: the proper orthogonal decomposition (POD) basis and the balanced truncation basis. The projection step of the model reduction can be done in two ways: via continuous projection or via discrete projection. First, an approach for building energy-stable Galerkin ROMs for linear hyperbolicmore » or incompletely parabolic systems of PDEs using continuous projection is proposed. The idea is to apply to the set of PDEs a transformation induced by the Lyapunov function for the system, and to build the ROM in the transformed variables. The resulting ROM will be energy-stable for any choice of reduced basis. It is shown that, for many PDE systems, the desired transformation is induced by a special weighted L2 inner product, termed the %E2%80%9Csymmetry inner product%E2%80%9D. Attention is then turned to building energy-stable ROMs via discrete projection. A discrete counterpart of the continuous symmetry inner product, a weighted L2 inner product termed the %E2%80%9CLyapunov inner product%E2%80%9D, is derived. The weighting matrix that defines the Lyapunov inner product can be computed in a black-box fashion for a stable LTI system arising from the discretization of a system of PDEs in space. It is shown that a ROM constructed via discrete projection using the Lyapunov inner product will be energy-stable for any choice of reduced basis. Connections between the Lyapunov inner product and the inner product induced by the balanced truncation algorithm are made. Comparisons are also made between the symmetry inner product and the Lyapunov inner product. The performance of ROMs constructed using these inner products is evaluated on several benchmark test cases.« less

Evaluation of inhaled and cutaneous doses of imidacloprid during stapling ornamental plants in tunnels or greenhouses.

PubMed

Aprea, Cristina; Lunghini, Liana; Banchi, Bruno; Peruzzi, Antonio; Centi, Letizia; Coppi, Luana; Bogi, Mirella; Marianelli, Enrico; Fantacci, Mariella; Catalano, Pietro; Benvenuti, Alessandra; Miligi, Lucia; Sciarra, Gianfranco

2009-09-01

The aim of this research was to assess dermal and respiratory exposure of workers to imidacloprid during manual operations with ornamental plants previously treated in greenhouses or tunnels. A total of 10 female workers, 5 in greenhouses and 5 in tunnels, were monitored for 3 or 5 consecutive days. Actual skin contamination, excluding hands, was evaluated using nine filter paper pads placed directly on the skin. To evaluate the efficacy of protective clothing in reducing occupational exposure we also placed four pads on top of the outer clothing. Hand contamination was evaluated by washing with 95% ethanol. Respiratory exposure was evaluated by personal air sampling. Respiratory dose was calculated on the basis of a lung ventilation of 15 l/min. Absorbed doses were calculated assuming a skin penetration of 10% and a respiratory retention of 100%. Dislodgeable foliar residues (DFRs) were determined during the days of re-entry in order to determine the dermal transfer factor. From the dependence of dermal exposure of hands from DFRs, a mean transfer factor was estimated to be 36.4 cm(2)/h. Imidacloprid was determined by liquid chromatography with selective mass detection and electrospray interface in all matrices analysed. Respiratory dose was 4.1+/-4.0 (0.1-14.3)% and 3.0+/-2.0 (0.6-6.9)% (mean+/-SD (range)) of the total real dose during work in tunnels and greenhouses, respectively. The estimated absorbed doses, 0.29+/-0.45 microg/kg (0.06-2.25 microg/kg) body weight and 0.32+/-0.18 microg/kg (0.07-0.66 microg/kg) body weight (mean+/-SD (range)) in tunnels and in greenhouses, respectively, were less than the acceptable operator exposure level of 0.15 mg/kg body weight and than the acceptable daily intake of 0.05 mg/kg body weight. The hands and exposed skin of all workers were found to be contaminated, indicating that greater precautions, such as daily changing of gloves and clothing, are necessary to reduce skin exposure.

Biochemical characterization of soluble proteins in pecan [Carya illinoinensis (Wangenh.) K. Koch].

PubMed

Venkatachalam, Mahesh; Roux, Kenneth H; Sathe, Shridhar K

2008-09-10

Pecans (cv. Desirable) contained approximately 10% protein on a dry weight basis. The minimum nitrogen solubility (5.9-7.5%) at 0.25-0.75 M trichloroacetic acid represented the nonprotein nitrogen. Among the solvents assessed for protein solubilization, 0.1 M NaOH was the most effective, while borate saline buffer (pH 8.45) was judged to be optimal for protein solubilization. The protein solubility was minimal in the pH range of 3-7 and significantly increased on either side of this pH range. Increasing the NaCl concentration from 0 to 4 M significantly improved ( approximately 8-fold increase) protein solubilization. Following Osborne protein fractionation, the alkali-soluble glutelin fraction (60.1%) accounted for a major portion of pecan proteins followed by globulin (31.5%), prolamin (3.4%), and albumin (1.5%), respectively. The majority of pecan polypeptides were in the molecular mass range of 12-66 kDa and in the pI range of 4.0-8.3. The pecan globulin fraction was characterized by the presence of several glycoprotein polypeptides. Lysine was the first limiting essential amino acid in the defatted flour, globulin, prolamin, and alkaline glutelin fractions. Leucine and tryptophan were the first limiting essential amino acids in albumin and acid glutelin fractions, respectively. Rabbit polyclonal antibodies detected a range of pecan polypeptides in the 12-60 kDa range, of which the globulin fraction contained the most reactive polypeptides.

Obesity Stigma: Important Considerations for Public Health

PubMed Central

Heuer, Chelsea A.

2010-01-01

Stigma and discrimination toward obese persons are pervasive and pose numerous consequences for their psychological and physical health. Despite decades of science documenting weight stigma, its public health implications are widely ignored. Instead, obese persons are blamed for their weight, with common perceptions that weight stigmatization is justifiable and may motivate individuals to adopt healthier behaviors. We examine evidence to address these assumptions and discuss their public health implications. On the basis of current findings, we propose that weight stigma is not a beneficial public health tool for reducing obesity. Rather, stigmatization of obese individuals threatens health, generates health disparities, and interferes with effective obesity intervention efforts. These findings highlight weight stigma as both a social justice issue and a priority for public health. PMID:20075322

Development of an Assay Based on the Effects of PGBx on the Isolated Perfused Rat Heart and Rat Skeletal Muscle.

DTIC Science & Technology

1980-09-01

data alone, one might speculate thatx perhaps PGBx caused anoxexia and that this contributed to the weight loss and reduction in blood glucose...expressed as such. The molecular weight of material which we used (Preparation #25) was taken to be 2150. All dilutions of the drug, prior to its...identical to those described in the footnotes to Table 1.dNumber of hearts in each group. Calculated on the basis of tissue wet weight Significant (P<O.05

Department of the Air Force Supporting Data For Fiscal Year 1984 Budget Estimates Submitted to Congress, January 31, 1983. Descriptive Summaries, Research, Development, Test and Evaluation

DTIC Science & Technology

1983-01-01

formulated to achieve weight savings, successfully completed a 100 hour pump test with no loss of fluid viscosity. Initial synthetic approaches to...acquisition cost savings in one concept and 51 percent weight savings in another. (9) (U) Advanced 3D Materials: Demonstrated the feasibility of using...in the gas phase. This research will provide the basis for future laser weapons that are more efficient, powerful, and lighter weight than infrared

An Objective Approach to Determining the Weight Ranges of Prey Preferred by and Accessible to the Five Large African Carnivores

PubMed Central

Clements, Hayley S.; Tambling, Craig J.; Hayward, Matt W.; Kerley, Graham I. H.

2014-01-01

Broad-scale models describing predator prey preferences serve as useful departure points for understanding predator-prey interactions at finer scales. Previous analyses used a subjective approach to identify prey weight preferences of the five large African carnivores, hence their accuracy is questionable. This study uses a segmented model of prey weight versus prey preference to objectively quantify the prey weight preferences of the five large African carnivores. Based on simulations of known predator prey preference, for prey species sample sizes above 32 the segmented model approach detects up to four known changes in prey weight preference (represented by model break-points) with high rates of detection (75% to 100% of simulations, depending on number of break-points) and accuracy (within 1.3±4.0 to 2.7±4.4 of known break-point). When applied to the five large African carnivores, using carnivore diet information from across Africa, the model detected weight ranges of prey that are preferred, killed relative to their abundance, and avoided by each carnivore. Prey in the weight ranges preferred and killed relative to their abundance are together termed “accessible prey”. Accessible prey weight ranges were found to be 14–135 kg for cheetah Acinonyx jubatus, 1–45 kg for leopard Panthera pardus, 32–632 kg for lion Panthera leo, 15–1600 kg for spotted hyaena Crocuta crocuta and 10–289 kg for wild dog Lycaon pictus. An assessment of carnivore diets throughout Africa found these accessible prey weight ranges include 88±2% (cheetah), 82±3% (leopard), 81±2% (lion), 97±2% (spotted hyaena) and 96±2% (wild dog) of kills. These descriptions of prey weight preferences therefore contribute to our understanding of the diet spectrum of the five large African carnivores. Where datasets meet the minimum sample size requirements, the segmented model approach provides a means of determining, and comparing, the prey weight range preferences of any carnivore species. PMID:24988433

Pyrolytic conversion of plastic and rubber waste to hydrocarbons with basic salt catalysts

DOEpatents

Wingfield, Jr., Robert C.; Braslaw, Jacob; Gealer, Roy L.

1985-01-01

The invention relates to a process for improving the pyrolytic conversion of waste selected from rubber and plastic to low molecular weight olefinic materials by employing basis salt catalysts in the waste mixture. The salts comprise alkali or alkaline earth compounds, particularly sodium carbonate, in an amount of greater than about 1 weight percent based on the waste feed.

The role of environmental quality in gestational weight gain among U.S. pregnant women

EPA Science Inventory

From 2000-2009, 44% of United States (US) pregnant women had gestational weight gain (GWG) above and 20% had GWG below the recommended range of 15 to 40 pounds, which depends on starting weight. GWG outside the recommended range is associated with adverse outcomes including pre-e...

Comparing association of preoperative transrectal ultrasound prostate weight with prostate weight obtained after radical prostatectomy after adjustment for other prognostic factors in a subset of the Northwestern University Prostate SPORE database

NASA Astrophysics Data System (ADS)

Helenowski, Irene; Jovanovic, Borko; Gurley, Michael; Leikin, Robin; Catalona, William; Roston, Arden; Kuzel, Timothy

Transrectal ultrasound (TRUS) is a non-invasive approach to measure prostate size as a surrogate (density =1.0) for prostate weight with implications in prostate cancer prognosis. But the question is how reliable is this preoperative measurement compared to other measures of prostate weight. This work presents the correlations between preoperative TRUS prostate weight and prostate weight obtained after radical prostatectomy in 434 patients with mean TRUS weight 36g (range: 10g-120g) and the mean prostate weight obtained after radical prostatectomy 51g (range: 16g-180g) from the Northwestern University Prostate SPORE database. 311 patients with weight obtained by digital rectal exam (DRE) were also compared to the TRUS prostate weights with mean and range of DRE weights 33g (10g - 78g). Correlations were adjusted by age, BMI, an indicator variable for a pathological stage of III or greater, and for Gleason score greater than 7. Correlations were also computed for separately for European American and Other Race populations. Differences in means were evaluated via the paired t-test. Results indicate TRUS measures obtained via ultrasound as promising but improvement in the technology still appears needed.

Soil CO2 flux from three ecosystems in tropical peatland of Sarawak, Malaysia

NASA Astrophysics Data System (ADS)

Melling, Lulie; Hatano, Ryusuke; Goh, Kah Joo

2005-02-01

Soil CO2 flux was measured monthly over a year from tropical peatland of Sarawak, Malaysia using a closed-chamber technique. The soil CO2 flux ranged from 100 to 533 mg C m2 h1 for the forest ecosystem, 63 to 245 mg C m2 h1 for the sago and 46 to 335 mg C m2 h1 for the oil palm. Based on principal component analysis (PCA), the environmental variables over all sites could be classified into three components, namely, climate, soil moisture and soil bulk density, which accounted for 86% of the seasonal variability. A regression tree approach showed that CO2 flux in each ecosystem was related to different underlying environmental factors. They were relative humidity for forest, soil temperature at 5 cm for sago and water-filled pore space for oil palm. On an annual basis, the soil CO2 flux was highest in the forest ecosystem with an estimated production of 2.1 kg C m2 yr1 followed by oil palm at 1.5 kg C m2 yr1 and sago at 1.1 kg C m2 yr1. The different dominant controlling factors in CO2 flux among the studied ecosystems suggested that land use affected the exchange of CO2 between tropical peatland and the atmosphere.

Atomic weights of the elements--Review 2000 (IUPAC Technical Report)

USGS Publications Warehouse

de Laeter, John R.; Böhlke, John Karl; De Bièvre, P.; Hidaka, H.; Peiser, H.S.; Rosman, K.J.R.; Taylor, P.D.P.

2003-01-01

A consistent set of internationally accepted atomic weights has long been an essential aim of the scientific community because of the relevance of these values to science and technology, as well as to trade and commerce subject to ethical, legal, and international standards. The standard atomic weights of the elements are regularly evaluated, recommended, and published in updated tables by the Commission on Atomic Weights and Isotopic Abundances (CAWIA) of the International Union of Pure and Applied Chemistry (IUPAC). These values are invariably associated with carefully evaluated uncertainties. Atomic weights were originally determined by mass ratio measurements coupled with an understanding of chemical stoichiometry, but are now based almost exclusively on knowledge of the isotopic composition (derived from isotope-abundance ratio measurements) and the atomic masses of the isotopes of the elements. Atomic weights and atomic masses are now scaled to a numerical value of exactly 12 for the mass of the carbon isotope of mass number 12. Technological advances in mass spectrometry and nuclear-reaction energies have enabled atomic masses to be determined with a relative uncertainty of better than 1 ×10−7 . Isotope abundances for an increasing number of elements can be measured to better than 1 ×10−3 . The excellent precision of such measurements led to the discovery that many elements, in different specimens, display significant variations in their isotope-abundance ratios, caused by a variety of natural and industrial physicochemical processes. While such variations increasingly place a constraint on the uncertainties with which some standard atomic weights can be stated, they provide numerous opportunities for investigating a range of important phenomena in physical, chemical, cosmological, biological, and industrial processes. This review reflects the current and increasing interest of science in the measured differences between source-specific and even sample-specific atomic weights. These relative comparisons can often be made with a smaller uncertainty than is achieved in the best calibrated “absolute ” (=SI-traceable) atomic-weight determinations. Accurate determinations of the atomic weights of certain elements also influence the values of fundamental constants such as the Avogadro, Faraday, and universal gas constants. This review is in two parts: the first summarizes the development of the science of atomic-weight determinations during the 20th century; the second summarizes the changes and variations that have been recognized in the values and uncertainties of atomic weights, on an element-by-element basis, in the latter part of the 20th century.

The construction of general basis functions in reweighting ensemble dynamics simulations: Reproduce equilibrium distribution in complex systems from multiple short simulation trajectories

NASA Astrophysics Data System (ADS)

Zhang, Chuan-Biao; Ming, Li; Xin, Zhou

2015-12-01

Ensemble simulations, which use multiple short independent trajectories from dispersive initial conformations, rather than a single long trajectory as used in traditional simulations, are expected to sample complex systems such as biomolecules much more efficiently. The re-weighted ensemble dynamics (RED) is designed to combine these short trajectories to reconstruct the global equilibrium distribution. In the RED, a number of conformational functions, named as basis functions, are applied to relate these trajectories to each other, then a detailed-balance-based linear equation is built, whose solution provides the weights of these trajectories in equilibrium distribution. Thus, the sufficient and efficient selection of basis functions is critical to the practical application of RED. Here, we review and present a few possible ways to generally construct basis functions for applying the RED in complex molecular systems. Especially, for systems with less priori knowledge, we could generally use the root mean squared deviation (RMSD) among conformations to split the whole conformational space into a set of cells, then use the RMSD-based-cell functions as basis functions. We demonstrate the application of the RED in typical systems, including a two-dimensional toy model, the lattice Potts model, and a short peptide system. The results indicate that the RED with the constructions of basis functions not only more efficiently sample the complex systems, but also provide a general way to understand the metastable structure of conformational space. Project supported by the National Natural Science Foundation of China (Grant No. 11175250).

Crystal structure prediction supported by incomplete experimental data

NASA Astrophysics Data System (ADS)

Tsujimoto, Naoto; Adachi, Daiki; Akashi, Ryosuke; Todo, Synge; Tsuneyuki, Shinji

2018-05-01

We propose an efficient theoretical scheme for structure prediction on the basis of the idea of combining methods, which optimize theoretical calculation and experimental data simultaneously. In this scheme, we formulate a cost function based on a weighted sum of interatomic potential energies and a penalty function which is defined with partial experimental data totally insufficient for conventional structure analysis. In particular, we define the cost function using "crystallinity" formulated with only peak positions within the small range of the x-ray-diffraction pattern. We apply this method to well-known polymorphs of SiO2 and C with up to 108 atoms in the simulation cell and show that it reproduces the correct structures efficiently with very limited information of diffraction peaks. This scheme opens a new avenue for determining and predicting structures that are difficult to determine by conventional methods.

Compression-ignition Engine Performance at Altitudes and at Various Air Pressures and Temperatures

NASA Technical Reports Server (NTRS)

Moore, Charles S; Collins, John H

1937-01-01

Engine test results are presented for simulated altitude conditions. A displaced-piston combustion chamber on a 5- by 7-inch single cylinder compression-ignition engine operating at 2,000 r.p.m. was used. Inlet air temperature equivalent to standard altitudes up to 14,000 feet were obtained. Comparison between performance at altitude of the unsupercharged compression-ignition engine compared favorably with the carburetor engine. Analysis of the results for which the inlet air temperature, inlet air pressure, and inlet and exhaust pressure were varied indicates that engine performance cannot be reliably corrected on the basis of inlet air density or weight of air charge. Engine power increases with inlet air pressure and decreases with inlet air temperatures very nearly as straight line relations over a wide range of air-fuel ratios. Correction factors are given.

Protein profile of mature soybean seeds and prepared soybean milk.

PubMed

Capriotti, Anna Laura; Caruso, Giuseppe; Cavaliere, Chiara; Samperi, Roberto; Stampachiacchiere, Serena; Zenezini Chiozzi, Riccardo; Laganà, Aldo

2014-10-08

The soybean (Glycine max (L.) Merrill) is economically the most important bean in the world, providing a wide range of vegetable proteins. Soybean milk is a colloidal solution obtained as water extract from swelled and ground soybean seeds. Soybean proteins represent about 35-40% on a dry weight basis and they are receiving increasing attention with respect to their health effects. However, the soybean is a well-recognized allergenic food, and therefore, it is urgent to define its protein components responsible for the allergenicity in order to develop hypoallergenic soybean products for sensitive people. The main aim of this work was the characterization of seed and milk soybean proteome and their comparison in terms of protein content and specific proteins. Using a shotgun proteomics approach, 243 nonredundant proteins were identified in mature soybean seeds.

Thermionic fast spectrum reactor-converter on the basis of multi-cell TFE

NASA Astrophysics Data System (ADS)

Ponomarev-Stepnoi, N. N.; Kompaniets, G. V.; Poliakov, D. N.; Stepennov, B. S.; Andreev, P. V.; Zhabotinsky, E. E.; Nikolaev, Yu. V.; Lapochkin, N. V.

2001-02-01

Today Russian experts have technological experience in development of in-core thermionic converters for reactors of space nuclear power plants. Such a converter contains nuclear fuel inside and really represents a fuel element of a reactor. Two types of reactors can be considered on the basis of these thermionic fuel elements: with thermal or intermediate neutron spectrum, and with fast neutron spectrum. The first type is characterized by the presence of moderator in core that ensures most economical usage of nuclear fuel. The estimation shows that moderated system is the most effective in the power range of about 5 ... 100 kWe. The power systems of higher level are characterized by larger dimensions due to the presence of moderator. The second type of reactor is considered for higher power levels. This power range is about hundreds kWe. Dimensions of the fast reactor and core configuration are determined by the necessity to ensure the required net output power, on the one hand, and the necessity to ensure critical state on the other hand. In the case of using in-core thermionic fuel elements of the specified design, minimal reactor output power is determined by reactor criticality condition, and maximum reactor power output is determined by specifications and launcher capabilities. In the present paper the effective multiplication factor of a fast spectrum reactor on the basis of a multi-cell TFE developed by ``Lutch'' is considered a function of the total number of TFEs in the reactor. The MCU Monte-Carlo code, developed in Russia (Alekseev, et al., 1991), was used for computations. TFE computational models are placed in the nodes of a uniform triangular lattice and surrounded with pressure vessel and a side reflector. Ordinary fuel pins without thermionic converters were used instead of some TFEs to optimize criticality parameters, dimensions and output power of the reactor. General weight parameters of the reactor are presented in the paper. .

Relationships between sedimentation, depositional environments, and coal quality: upper Potomac coalfield, West Virginia and Maryland

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jake, T.R.

1987-09-01

Evaluations were made of sedimentation patterns and depositional environments from approximately 450 core logs and 225 surface exposures in the Upper Potomac coalfield. The relationships between the clastic depositional facies and the distribution and quality of the Bakerstown and upper Freeport coals were also investigated. Data from 61 Bakerstown and 35 upper Freeport coal samples from selected cores indicate a change from uniform coal quality to highly variable coal quality when moving from related interchannel and bay-fill facies to channel, channel-fill, levee, and crevasse-splay facies. Areas of uniform coal quality range from 20-26% ash and 55-62% fixed carbon (weight percent,more » dry basis), whereas areas of highly variable coal quality range from 26-54% ash and 33-55% fixed carbon. The channel and related facies represent areas where increased fresh water was introduced into the topogenous swamp system, causing increased microbial degradation and the concentration of authigenic minerals within the peat material. These conditions, combined with the introduction of detrital minerals, resulted in areas of lower quality coal.« less

Diagnostic brain residues of dieldrin: Some new insights

USGS Publications Warehouse

Heinz, G.H.; Johnson, R.W.; Lamb, D.W.; Kenaga, E.E.

1981-01-01

Forty adult male cowbirds were fed a diet containing 20 ppm dieldrin; 20 of the birds were randomly selected to die from dieldrin poisoning and 20 were sacrificed when dieldrin had made them too sick to eat. An average of 6.8 ppm dieldrin (range of 1.51 to 11.7) in the brain on a wet-weight basis was associated with a treatment-related cessation of feeding, whereas an average of 16.3 ppm (range of 9.84 to 23.5) was found in the brains of birds that died from dieldrin poisoning; the latter concentrations agreed with those determined in other studies. Dieldrin-induced starvation was generally irreversible; therefore, brain levels of dieldrin that are clearly sublethal may nevertheless present a grave hazard to birds by initiating a process that leads to death. Fatter cowbirds were able to survive longer on dieldrin treatment but contained brain residues similar to those in cowbirds that died sooner. Some cowbirds survived for 2 months or longer with unexpectedly large amounts of body fat remaining when they died or were sacrificed. Fatter cowbirds also survived longer after they had stopped eating.

Structure and physical properties of starch/poly vinyl alcohol/sodium montmorillonite nanocomposite films.

PubMed

Ali, Samer S; Tang, Xiaozhi; Alavi, Sajid; Faubion, Jon

2011-12-14

Nanocomposites of starch, poly vinyl alcohol (PVOH), and sodium montmorillonite (Na(+)MMT) were produced by solution mixing and cast into films. Tensile strength (TS) and elongation at the break (E%) of the films ranged from 11.60 to 22.35 MPa and 28.93-211.40%, respectively, while water vapor permeability (WVP) ranged from 0.718 to 1.430 g·mm/kPa·h·m(2). In general, an increase in Na(+)MMT content (0-20%) enhanced TS and decreased E% and WVP. Use of higher molecular weight PVOH increased both TS and E% and also decreased WVP. Mechanical properties were negatively affected, but water vapor barrier properties improved with increasing starch content (0-80%). X-ray diffraction and transmission electron microscopy were used to analyze the nanostructure, and molecular conformations and interactions in the multicomponent nanocomposites were inferred from glass transition behavior. Interactions between starch and PVOH were strongest, followed by polymer/clay interactions. On the basis of this insight, a conceptual model was presented to explain the phenomena of intercalation and exfoliation in the starch/PVOH/Na(+)MMT nanocomposites.

Free radical scavenging activity and secondary metabolites from in vitro cultures of Sanicula graveolens.

PubMed

Cheel, José; Schmeda-Hirschmann, Guillermo; Jordan, Miguel; Theoduloz, Cristina; Rodríguez, Jaime A; Gerth, André; Wilken, Dirk

2007-01-01

An in vitro propagation system was developed to obtain shoot and root cultures from the Andean spice Sanicula graveolens (Apiaceae). Propagation of shoots, roots and plantlets was achieved by the temporary immersion system. The free radical scavenging effect of the methanol/water (7:3 v/v) extracts was determined by the discoloration of the 1,1-diphenyl-2-picrylhydrazyl radical (DPPH). Total phenolic, flavonoid, chlorogenic acid (CA) and quercetin 3-O-glucoside content in the samples was assessed by spectrophotometry and DAD-HPLC analysis, respectively. On a dry weight basis, the crude extracts showed total phenolic values ranging from 3.57 to 6.93%, with highest content for the root culture sample. Total flavonoid content ranged from 1.23 to 2.23% and was lower for the root culture. Chlorogenic acid and neochlorogenic acid were identified by TLC in all samples. Highest free radical scavenging effect was observed for the root culture which also presented the highest CA content. Two of the shoot culture samples, with similar IC50 values in the DPPH discoloration assay, also presented close quercetin-3-O-glucoside content.

Histidinoalanine, a naturally occurring cross-link derived from phosphoserine and histidine residues in mineral-binding phosphoproteins.

PubMed

Marsh, M E

1986-05-06

Native mineral-containing phosphoprotein particles were isolated from the Heterodont bivalve Macrocallista nimbosa. The native particles are discrete structures about 40 nm in diameter which migrate as a single band during electrophoresis in agarose gels. Removal of the mineral component with ethylenediaminetetraacetic acid dissociates the native protein into nonidentical subunits. The lower molecular weight subunits, representing 8% of the total protein, were obtained by differential centrifugation. The native protein is characterized by a high content of aspartic acid, phosphoserine, phosphothreonine, histidine, and the bifunctional cross-linking residue histidinoalanine. The low molecular weight subunits have the same amino acid composition except for a reduction in histidinoalanine and a corresponding increase in phosphoserine and histidine residues, demonstrating that the alanine portion of the cross-link is derived from phosphoserine residues. Ion-exchange chromatography and molecular sieve chromatography show that the low molecular weight subunits have a similar charge density but differ in molecular weight, and the relative mobilities of the subunits on agarose gels indicate that they are polymers of a single phosphoprotein molecule. The minimum molecular weight of the monomer is about 140 000 on the basis of the amino acid composition. The high molecular weight subunits are rich in histidinoalanine and too large to be resolved by either molecular sieve chromatography or gel electrophoresis. On the basis of the ultrastructural, electrophoretic, chromatographic, and compositional evidence, native phosphoprotein particles are composed of subunits ionically cross-linked via divalent cations. These subunits are variable molecular weight aggregates of a single phosphoprotein molecule covalently cross-linked via histidinoalanine residues. Evidence for a nonenzymatic cross-linking mechanism is discussed.

Effects of cooking on radiocesium in fish from the Savannah River: exposure differences for the public.

PubMed

Burger, Joanna; Gaines, Karen F; Boring, C Shane; Snodgrass, J; Stephens, W L; Gochfeld, M

2004-02-01

Understanding the factors that contribute to the risk from fish consumption is an important public health concern because of potential adverse effects of radionuclides, organochlorines, other pesticides, and mercury. Risk from consumption is normally computed on the basis of contaminant levels in fish, meal frequency, and meal size, yet cooking practices may also affect risk. This study examines the effect of deep-frying on radiocesium (137Cs) levels and risk to people fishing along the Savannah River. South Carolina and Georgia have issued consumption advisories for the Savannah River, based partly on 137Cs. 137Cs levels were significantly higher in the cooked fish compared to the raw fish on a wet weight basis. Mean 137Cs levels were 0.61 pCi/g (wet weight basis) in raw fish, 0.81 pCi/g in cooked-breaded, and 0.99 pCi/g in cooked-unbreaded fish. Deep-frying with and without breading resulted in a weight loss of 25 and 39%, while 137Cs levels increased by 32 and 62%, respectively. Therefore, the differences were due mainly to weight loss during cooking. However, the data suggest that risk assessments should be based on cooked portion size for contaminant analysis, or the risk from 137Cs in fish will be underestimated. People are likely to estimate the amounts of fish they eat based on a meal size of the cooked portion, while risk assessors determine 137Cs levels in raw fish. A conversion factor of at least two for 137Cs increase during cooking is reasonable and conservative, given the variability in 137Cs levels. The data also suggest that surveys determining consumption should specifically ask about portion size before or after cooking and state which was used in their methods.

Methods of producing armor systems, and armor systems produced using such methods

DOEpatents

Chu, Henry S; Lillo, Thomas M; McHugh, Kevin M

2013-02-19

An armor system and method involves providing a core material and a stream of atomized coating material that comprises a liquid fraction and a solid fraction. An initial layer is deposited on the core material by positioning the core material in the stream of atomized coating material wherein the solid fraction of the stream of atomized coating material is less than the liquid fraction of the stream of atomized coating material on a weight basis. An outer layer is then deposited on the initial layer by positioning the core material in the stream of atomized coating material wherein the solid fraction of the stream of atomized coating material is greater than the liquid fraction of the stream of atomized coating material on a weight basis.

Weighted projected networks: mapping hypergraphs to networks.

PubMed

López, Eduardo

2013-05-01

Many natural, technological, and social systems incorporate multiway interactions, yet are characterized and measured on the basis of weighted pairwise interactions. In this article, I propose a family of models in which pairwise interactions originate from multiway interactions, by starting from ensembles of hypergraphs and applying projections that generate ensembles of weighted projected networks. I calculate analytically the statistical properties of weighted projected networks, and suggest ways these could be used beyond theoretical studies. Weighted projected networks typically exhibit weight disorder along links even for very simple generating hypergraph ensembles. Also, as the size of a hypergraph changes, a signature of multiway interaction emerges on the link weights of weighted projected networks that distinguishes them from fundamentally weighted pairwise networks. This signature could be used to search for hidden multiway interactions in weighted network data. I find the percolation threshold and size of the largest component for hypergraphs of arbitrary uniform rank, translate the results into projected networks, and show that the transition is second order. This general approach to network formation has the potential to shed new light on our understanding of weighted networks.

Determination of the absolute molecular weight averages and molecular weight distributions of alginates used as ice cream stabilizers by using multiangle laser light scattering measurements.

PubMed

Turquois, T; Gloria, H

2000-11-01

High-performance size exclusion chromatography with multiangle laser light scattering detection (HPSEC-MALLS) was used for characterizing complete molecular weight distributions for a range of commercial alginates used as ice cream stabilizers. For the samples investigated, molecular weight averages were found to vary between 115 000 and 321 700 g/mol and polydispersity indexes varied from 1. 53 to 3.25. These samples displayed a high content of low molecular weights. Thus, the weight percentage of material below 100 000 g/mol ranged between 6.9 and 54.4%.

Determination of some selected secondary metabolites and their invitro antioxidant activity in commercially available Ethiopian tea (Camellia sinensis).

PubMed

Bizuayehu, Dereje; Atlabachew, Minaleshewa; Ali, Mirtachew Tihar

2016-01-01

Eight brands of tea (Camellia sinensis),which are cultivated and commercially available in Ethiopian market, were analyzed for estimation of their total secondary metabolites (polyphenols, flavonoids and tannins) content and free radical scavenging activity which is expressed on dry weight basis. In this present study, the total polyphenols, tannin and flavonoid contents were studied spectrophotometrically using Folin-Dennis, Folin-Dennis/protein precipitation and aluminium chloride methods respectively. The free radical scavenging activity was determined by using DPPH radical assay. Results of the analysis revealed that the total polyphenol content varied from 21.3 ± 0.24 to 31.6 ± 0.31 mg of gallic acid equivalent/g of dry matter. Total flavonoids content in the tea samples varied from 8.17 ± 0.68 to 23.2 ± 0.68 mg of catechin equivalent/g of dry weight and tannin content varied from 5.64 ± 0.39 7.45 ± 0.27 mg tannic acid equivalent/g of dry weight basis. The free radical scavenging activity among the tea brand samples ranged from 28.8 ± 1.86 to 80.0 ± 0.63 mg ascorbic acid equivalent/g and the half maximal inhibitory concentration (IC50%) values varied from 7.3 ± 1.35 to 64.0 ± 2.81 µg/mL of extract. The correlation between the antioxidant activity with total polyphenol content (R = 0.91325), with flavonoids (R = 0.80658) and with tannin (R = 0.73125) was calculated and maximum correlation value was found between polyphenol content and the free radical scavenging activity of the tea samples. The results in this study also revealed that green tea had the higher polyphenolic content and found to have the most promising antioxidant activity. This study further confirmed that Ethiopia tea is reach in phenolic compounds as compared to some overseas tea cultivars/varieties.

Anthropometric data peculiarities in early school children population.

PubMed

Jorjoliani, L; Karseladze, R; Vekua, M; Chkhartishvili, E; Bigvava, T

2011-01-01

The anthropometric data were studied in early school aged (6-7 years old) children and the degree of harmonization during physical development was evaluated. Representative population of 400 otherwise healthy early school aged children was included in study group. Study period covered the end of school year. In the selected under observation focused population the level of individual anthropometric data was determined in percentile intervals according its position. Anthropometric data assessments by using percentile method it was revealed in early school aged (6-7 years of old children) excess in body height and weight in comparison with normal values. This phenomenon indicates the prevalence of acceleration and weight gain. Anthropometric data in boys were increased while comparing with physical development data in girls. This result difference has the tendency to statistically insignificant. Physical development harmonization values were studied in 200 children. Harmonized physical development revealed in 50 children (25%); disharmonized physical development I 50 children (15%), among them with I degree weight gain were 48 (24%), and with I degree weight deficit were 2 (1%). Markedly disharmonized development had 100 children (50%), among them with II degree weight gain were 98 (49%), and with II degree weight deficit were 2 (1%). According to the children's anthropometric data and assessment by physical development harmonization percentiles tables three groups of children were organized: main, risk group and the group with deviation in physical development. On the basis of resulted data the study of early school age children's physical development gives possibility for risk groups stratification, which in turn itself makes a strong basis for reasonable preventive measurements and stepwise monitoring implementation.

Open hole and postimpact compressive fatigue of stitched and unstitched carbon-epoxy composites

NASA Technical Reports Server (NTRS)

Portanova, Marc A.; Poe, Clarence C.; Whitcomb, John D.

1992-01-01

The performance is studied of a stitched uniweave fabric composite and that of a toughened tape composite. The effects of stitching on compression fatigue life are addressed. Post impact compression fatigue and open hole fatigue tests were run on an AS4/3501-6 uniweave with stitching and a toughened IM7/8551-7 tape without stitching. Stitching was found to increase the thickness and consequently the weight of the composite material. The two materials were compared on an equal carbon content basis as well as on an equal weight basis. The excess thickness in the stitched uniweave composite was responsible for the lower fatigue life, on an equal carbon basis, compared to the toughened resin tape composite. Comparison of fatigue lives on an equal carbon content basis indicated that puncture or crimp type damage from stitching has very little effect on compression failure. Post impact fatigue test showed that although the damage area in the stitched uniweave composite was twice that of the toughened tape composite, the fatigue lives of the stitched composite were significantly longer than those of the toughened composite. Thus, it appears that the increase in thickness from stitching is much more of a penalty than crimped fibers or puncture type damage from stitching.

Open hole and post-impact compression fatigue of stitched and unstitched carbon/epoxy composites

NASA Technical Reports Server (NTRS)

Portanova, M. A.; Poe, C. C., Jr.; Whitcomb, John D.

1990-01-01

The performance is studied of a stitched uniweave fabric composite and that of a toughened tape composite. The effects of stitching on compression fatigue life are addressed. Post impact compression fatigue and open hole fatigue tests were run on an AS4/3501-6 uniweave with stitching and a toughened IM7/8551-7 tape without stitching. Stitching was found to increase the thickness and consequently the weight of the composite material. The two materials were compared on an equal carbon content basis as well as on an equal weight basis. The excess thickness in the stitched uniweave composite was responsible for the lower fatigue life, on an equal carbon basis, compared to the toughened resin tape composite. Comparison of fatigue lives on an equal carbon content basis indicated that puncture or crimp type damage from stitching has very little effect on compression failure. Post impact fatigue test showed that although the damage area in the stitched uniweave composite was twice that of the toughened tape composite, the fatigue lives of the stitched composite were significantly longer than those of the toughened composite. Thus, it appears that the increase in thickness from stitching is much more of a penalty than crimped fibers or puncture type damage from stitching.

The use of computed tomography for the estimation of DIEP flap weights in breast reconstruction: a simple mathematical formula.

PubMed

Nanidis, Theodore G; Ridha, Hyder; Jallali, Navid

2014-10-01

Estimation of the volume of abdominal tissue is desirable when planning autologous abdominal based breast reconstruction. However, this can be difficult clinically. The aim of this study was to develop a simple, yet reliable method of calculating the deep inferior epigastric artery perforator flap weight using the routine preoperative computed tomography angiogram (CTA) scan. Our mathematical formula is based on the shape of a DIEP flap resembling that of an isosceles triangular prism. Thus its volume can be calculated with a standard mathematical formula. Using bony landmarks three measurements were acquired from the CTA scan to calculate the flap weight. This was then compared to the actual flap weight harvested in both a retrospective feasibility and prospective study. In the retrospective group 17 DIEP flaps in 17 patients were analyzed. Average predicted flap weight was 667 g (range 293-1254). The average actual flap weight was 657 g (range 300-1290) giving an average percentage error of 6.8% (p-value for weight difference 0.53). In the prospective group 15 DIEP flaps in 15 patients were analyzed. Average predicted flap weight was 618 g (range 320-925). The average actual flap weight was 624 g (range 356-970) giving an average percentage error of 6.38% (p-value for weight difference 0.57). This formula is a quick, reliable and accurate way of estimating the volume of abdominal tissue using the preoperative CTA scan. Copyright © 2014 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Effect of moisture loss on red oak sawlog weight

Treesearch

Edward L. Adams

1971-01-01

A study was made to determine the effect of moisture loss on the weights of red oak sawlogs. The logs, ranging from 9 to 21 inches in scaling diameter and from 8 to 14 feet in length, were dried for a 12-week period. The 21-log sample lost 7.6 percent of the total green sawlog weight. The weight loss for individual logs ranged from 5.3 to 14.5 percent. In general, as...

LUTE telescope structural design

NASA Technical Reports Server (NTRS)

Ruthven, Gregory

1993-01-01

The major objective of the Lunar Ultraviolet Transit Experiment (LUTE) Telescope Structural Design Study was to investigate the feasibility of designing an ultralightweight 1-m aperture system within optical performance requirements and mass budget constraints. This study uses the results from our previous studies on LUTE as a basis for further developing the LUTE structural architecture. After summarizing our results in Section 2, Section 3 begins with the overall logic we used to determine which telescope 'structural form' should be adopted for further analysis and weight estimates. Specific telescope component analysis showing calculated fundamental frequencies and how they compare with our derived requirements are included. 'First-order' component stress analyses to ensure telescope optical and structural component (i.e. mirrors & main bulkhead) weights are realistic are presented. Layouts of both the primary and tertiary mirrors showing dimensions that are consistent with both our weight and frequency calculations also form part of Section 3. Section 4 presents our calculated values for the predicted thermally induced primary-to-secondary mirror despace motion due to the large temperature range over which LUTE must operate. Two different telescope design approaches (one which utilizes fused quartz metering rods and one which assumes the entire telescope is fabricated from beryllium) are considered in this analysis. We bound the secondary mirror focus mechanism range (in despace) based on these two telescope configurations. In Section 5 we show our overall design of the UVTA (Ultraviolet Telescope Assembly) via an 'exploded view' of the sub-system. The 'exploded view' is annotated to help aid in the understanding of each sub-assembly. We also include a two view layout of the UVTA from which telescope and telescope component dimensions can be measured. We conclude our study with a set of recommendations not only with respect to the LUTE structural architecture but also on other topics related to the overall feasibility of the LUTE telescope sub-system.

The status of lightweight photovoltaic space array technology based on amorphous silicon solar cells

NASA Astrophysics Data System (ADS)

Hanak, J. J.; Kaschmitter, J. L.

1991-05-01

An ultralight, flexible photovoltaic (PV) array of amorphous silicon (a-Si) has been identified as a potential low-cost power source for small satellites. We have conducted a survey of the status of the a-Si PV array technology with respect to present and future performance, availability, cost and risks. For existing, experimental array 'blankets' made of commercial cell material, utilizing metal foil substrates, the BOL performance at AM0 and 35 C includes total power up to 200 W, power per area of 64 W/sq m and power per weight of 258 W/kg. Doubling of power per weight occurs when polyimide substrates are used. Estimated EOL power output after 10 years in a nominal low-earth orbit would be 80 percent of BOL, the degradation being due to largely light-induced effects (minus 10 to minus 15 percent) and in part (minus 5 percent) to space radiation. Predictions for the year 1995 for flexible PV arrays, made on the basis of published results for rigid a-Si modules, indicate EOL power output per area and per weight of 105 W/sq m and 400 W/kg, respectively, while predictions for the late 1990s based on existing US national PV program goals indicate EOL values of 157 W/sq m and 600 W/kg. cost estimates by vendors for 200 W ultralight arrays in volume of over 1000 units range from $100/watt to $125/watt. Identified risks include the lack of flexible, space compatible encapsulant, the lack of space qualification effort, recent partial or full acquisitions of US manufacturers of a-Si cells by foreign firms, and the absence of a national commitment for a long-range development program toward developing of this important power source for space. One new US developer has emerged as a future potential supplier of a-Si PV devices on thin, polyimide substrates.

Tg.rasH2 Mice and not CByB6F1 Mice Should Be Used for 28-Day Dose Range Finding Studies Prior to 26-Week Tg.rasH2 Carcinogenicity Studies.

PubMed

Paranjpe, Madhav G; Belich, Jessica; Vidmar, Tom J; Elbekai, Reem H; McKeon, Marie; Brown, Caren

Our recent retrospective analysis of data, collected from 29 Tg.rasH2 mouse carcinogenicity studies, determined how successful the strategy of choosing the high dose for the 26-week studies was based on the estimated maximum tolerated dose (EMTD) derived from earlier 28-day dose range finding (DRF) studies conducted in CByB6F1 mice. Our analysis demonstrated that the high doses applied at EMTD in the 26-week Tg.rasH2 studies failed to detect carcinogenic effects. To investigate why the dose selection process failed in the 26-week carcinogenicity studies, the initial body weights, terminal body weights, body weight gains, food consumption, and mortality from the first 4 weeks of 26-week studies with Tg.rasH2 mice were compared with 28-day DRF studies conducted with CByB6F1 mice. Both the 26-week and the earlier respective 28-day studies were conducted with the exact same vehicle, test article, and similar dose levels. The analysis of our results further emphasizes that the EMTD and subsequent lower doses, determined on the basis of the 28-day studies in CByB6F1 mice, may not be an accurate strategy for selecting appropriate dose levels for the 26-week carcinogenicity studies in Tg.rasH2 mice. Based on the analysis presented in this article, we propose that the Tg.rasH2 mice and not the CByB6F1 mice should be used in future DRF studies. The Tg.rasH2 mice demonstrate more toxicity than the CByB6F1 mice, possibly because of their smaller size compared to CByB6F1 mice. Also, the Tg.rasH2 males appear to be more sensitive than the female Tg.rasH2 mice.

Current risk estimates based on the A-bomb survivors data - a discussion in terms of the ICRP recommendations on the neutron weighting factor.

PubMed

Rühm, W; Walsh, L

2007-01-01

Currently, most analyses of the A-bomb survivors' solid tumour and leukaemia data are based on a constant neutron relative biological effectiveness (RBE) value of 10 that is applied to all survivors, independent of their distance to the hypocentre at the time of bombing. The results of these analyses are then used as a major basis for current risk estimates suggested by the International Commission on Radiological Protection (ICRP) for use in international safety guidelines. It is shown here that (i) a constant value of 10 is not consistent with weighting factors recommended by the ICRP for neutrons and (ii) it does not account for the hardening of the neutron spectra in Hiroshima and Nagasaki, which takes place with increasing distance from the hypocentres. The purpose of this paper is to present new RBE values for the neutrons, calculated as a function of distance from the hypocentres for both cities that are consistent with the ICRP60 neutron weighting factor. If based on neutron spectra from the DS86 dosimetry system, these calculations suggest values of about 31 at 1000 m and 23 at 2000 m ground range in Hiroshima, while the corresponding values for Nagasaki are 24 and 22. If the neutron weighting factor that is consistent with ICRP92 is used, the corresponding values are about 23 and 21 for Hiroshima and 21 and 20 for Nagasaki, respectively. It is concluded that the current risk estimates will be subject to some changes in view of the changed RBE values. This conclusion does not change significantly if the new doses from the Dosimetry System DS02 are used.

Nutritional status at presentation, comparison of assessment tools, and importance of arm anthropometry in children with cancer in India.

PubMed

Shah, P; Jhaveri, U; Idhate, T B; Dhingra, S; Arolkar, P; Arora, B

2015-01-01

In India, approximately 40,000 new cases of cancer in children are diagnosed each year. However, there are no good studies analyzing their nutritional status. Also, since accurate and sensitive nutritional assessment is critical for optimal clinical outcomes through timely remediation of malnutrition, it is important to assess the relative sensitivity and feasibility of commonly used nutritional screening tools. This observational study analyzed height/length (cm), weight (kg), mid-upper arm circumference (MUAC), triceps skinfold thickness (TSFT) as well as their Z-scores or percentiles, albumin levels and history of weight loss at diagnosis in children aged 2-15 years being treated for cancer between November 2008 to December 2013. Body mass index (BMI) and arm muscle circumference (AMC) were calculated respectively from height and weight, and MUAC and TSFT. A total of 1693 new patients were enrolled; 1187 had all anthropometric measurements performed. The prevalence of malnutrition was 38%, 57%, 76%, 69% and 81% on the basis of BMI, TSFT, MUAC, AMC, and arm TSFT + MUAC respectively with the highest prevalence in solid abdominal tumours. Addition of BMI and serum albumin to arm anthropometry increased the proportion classified as severely nutritionally depleted by a mere 2% & 1.5% respectively. Positive history of significant weight loss additionally identified 16.5% at nutritional risk over arm anthropometry. The prevalence of malnutrition in Indian children with cancer at presentation is very high ranging from 40% and 80% depending on the method used for assessment, being higher with MUAC and lowest with BMI. Either MUAC alone or TSFT + MUAC (wherever feasible) should be used for screening for malnutrition in children with cancer at diagnosis to plan timely nutritional interventions, reduce the treatment-related morbidity and optimise their chance of long-term cure.

Association between yogurt consumption, dietary patterns, and cardio-metabolic risk factors.

PubMed

Cormier, Hubert; Thifault, Élisabeth; Garneau, Véronique; Tremblay, Angelo; Drapeau, Vicky; Pérusse, Louis; Vohl, Marie-Claude

2016-03-01

To examine whether yogurt consumption is associated with a healthier dietary pattern and with a better cardio-metabolic risk profile among healthy individuals classified on the basis of their body mass index (BMI). A 91-item food frequency questionnaire, including data on yogurt consumption, was administered to 664 subjects from the INFOGENE study. After principal component analysis, two factors were retained, thus classified as the Prudent and Western dietary patterns. Yogurt was a significant contributor to the Prudent dietary pattern. Moreover, yogurt consumption was associated with lower body weight, waist-to-hip ratio, and waist circumference and tended to be associated with a lower BMI. Consumers had lower levels of fasting total cholesterol and insulin. Consumers of yogurt had a positive Prudent dietary pattern mean score, while the opposite trend was observed in non-consumers of yogurt. Overweight/obese individuals who were consumers of yogurts exhibited a more favorable cardio-metabolic profile characterized by lower plasma triglyceride and insulin levels than non-consumers within the same range of BMI. There was no difference in total yogurt consumption between normal-weight individuals and overweight/obese individuals. However, normal-weight subjects had more daily servings of high-fat yogurt and less daily servings of fat-free yogurt compared to overweight/obese individuals. Being a significant contributor to the Prudent dietary pattern, yogurt consumption may be associated with healthy eating. Also, yogurt consumption may be associated with lower anthropometric indicators and a more beneficial cardio-metabolic risk profile in overweight/obese individuals.

Temporal trends of contaminants in Arctic char (Salvelinus alpinus) from a small lake, southwest Greenland during a warming climate.

PubMed

Rigét, Frank; Vorkamp, Katrin; Muir, Derek

2010-12-01

Hg and legacy POPs were analysed in muscle tissue of a landlocked Arctic char (Salvelinus alpinus) population from a small lake in southwest Greenland. Hg concentrations were available for six years and OC concentrations for five years during the period 1994 to 2008. For two years, stable isotope values of nitrogen (δ(15)N) were analysed in muscle tissue in order to infer trophic effects. Hg, Σ10-PCB, ΣDDT and trans-nonachlor concentrations (OC on wet weight basis) showed an increase with increasing fish length, which had to be accounted for when assessing temporal trends. δ(15)N values had a narrow range, and there was no indication of increasing δ(15)N values with char length confirming the sampled char did not vary in trophic morphs as often seen in Arctic lakes. Length-adjusted Hg concentrations showed a significantly increasing trend during the period 1994 to 2008, while Σ10-PCB, ΣDDT, ΣHCH and trans-nonachlor showed a significantly decreasing trend when expressed on wet weight, and decreasing but not significantly when expressed on lipid weight. The reason for this was that the lipid content of muscle showed a significantly decreasing trend with time. The sum of mean monthly air temperature during May to August measured at a nearby meteorological station showed an increasing trend during the study period, and changing temperature conditions probably influenced the temporal trend of especially Hg concentrations and the lipid content.

Bioaccumulation of metals in the soft tissue of Patella aspera: Application of metal/shell weight indices

NASA Astrophysics Data System (ADS)

Cravo, A.; Bebianno, M. J.

2005-11-01

Patella aspera limpets were taken from a marine clean site (MCS) and an estuarine contaminated site (ECS). The concentrations of Fe, Mn, Zn, Cu, Cd, Ni and Co were determined individually over the available size range. Since there were significant differences in the soft tissue weight between populations, but shell characteristics were similar (length and weight), metal/shell weight indices (MSI) were calculated in order to compare populations. For both populations iron, zinc and manganese/shell weight indices were consistently higher, in the order Fe ≫ Zn ≫ Mn than those of Cu, Ni, Co and Cd. The results exhibited a marked intra- and inter-population variability. The highest intra-variability was observed at ECS, particularly where a strong effect of shell weight upon the metal accumulation in the soft tissue was evident. Due to this effect, the comparison of populations was carried out between three selected shell weight ranges representative of light shells (0.45-1.95 g), intermediate shells (2.95-4.45 g) and heavy shells (5.45-7.33 g). The results indicate that, in general, MSI at ECS (a sewage contaminated site), except for Cd, was higher than at MCS possibly reflecting a higher environmental bioavailability of these metals. The resolution between populations was higher when the smallest range of limpets was considered and it decreased with the increase of shell weight. The highest discrimination amongst populations was found for zinc/shell weight index that showed much higher values than those of Mn, Cu, Cd, Ni and Co/shell weight indices, and spatial differentiation between populations persisted amongst the selected shell weight ranges.

Phase Behavior of Binary Blends of High Molecular Weight Diblock Copolymers with a Low Molecular Weight Triblock

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mickiewicz, Rafal A.; Ntoukas, Eleftherios; Avgeropoulos, Apostolos

2009-08-26

Binary blends of four different high molecular weight poly(styrene-b-isoprene) (SI) diblock copolymers with a lower molecular weight poly(styrene-b-isoprene-b-styrene) (SIS) triblock copolymer were prepared, and their morphology was characterized by transmission electron microscopy and ultra-small-angle X-ray scattering. All the neat block copolymers have nearly symmetric composition and exhibit the lamellar morphology. The SI diblock copolymers had number-average molecular weights, Mn, in the range 4.4 x 10{sup 5}--1.3 x 10{sup 6} g/mol and volume fractions of poly(styrene), {Phi}{sub PS}, in the range 0.43--0.49, and the SIS triblock had a molecular weight of Mn 6.2 x 10{sup 4} g/mol with {Phi}{sub PS} =more » 0.41. The high molecular weight diblock copolymers are very strongly segregating, with interaction parameter values, {chi}N, in the range 470--1410. A morphological phase diagram in the parameter space of molecular weight ratio (R = M{sub n}{sup diblock}/1/2M{sub n}{sup triblock}) and blend composition was constructed, with R values in the range between 14 and 43, which are higher than previously reported. The phase diagram revealed a large miscibility gap for the blends, with macrophase separation into two distinct types of microphase-separated domains for weight fractions of SI, w{sub SI} < 0.9, implying virtually no solubility of the much higher molecular weight diblocks in the lower molecular weight triblock. For certain blend compositions, above R 30, morphological transitions from the lamellar to cylindrical and bicontinuous structures were also observed.« less

Pasture, multi-enzymes, benzoic acid and essential oils positively influence performance, intestinal organ weight and egg quality in free-range laying hens.

PubMed

Iqbal, Z; Roberts, J; Perez-Maldonado, R A; Goodarzi Boroojeni, F; Swick, R A; Ruhnke, I

2018-04-01

1. The objective of this study was to investigate the effect of range type, multi-enzyme applications, and a combination of benzoic acid (BA) and essential oils (EO) on the productive performance, organ weight and egg quality of free-range laying hens. 2. Three hundred laying hens were evaluated for the short-term (6 weeks) and long-term (12 weeks) effects of range type (G = no pasture, P = pasture) and feed additives (T1 = control; T2 = betaglucanase/pectinase/protease; T3 = BA/EO). Body weight, feed intake (FI), feed conversion ratio (FCR), egg production (EP), digestive organ weight, and egg quality (EQ) were evaluated. Data were analysed using SPSS 2.2 in a 2×2×3 factorial arrangement. 3. Hens that ranged on pasture were significantly heavier (2043 g vs. 1996 g; p < 0.001), laid heavier eggs (61.9 g vs. 60.3 g; p < 0.001) and produced darker yolk colour (4.3 vs. 7.0; p < 0.001) compared to hens ranged on gravel. Hens fed T2 were significantly heavier (2050 g) compared to hens fed T1 (2005 g) or T3 (2008 g). Organ weights (gizzard, liver and pancreas) were significantly heavier in hens ranged on pasture (16.8 g/kg BW, 22.3 g/kg BW and 1.89 g/kg BW, respectively) compared to hens ranged on gravel (14.2 g/kg BW, 21.7 g/kg BW and 1.83 g/kg BW, respectively). Over time, body weight (1970-2070 g; p < 0.001) and egg weight (59.5-62.8 g; p < 0.001) increased, FI (123-120 g; p = 0.024) was reduced and FCR (2.36-2.10; p = 0.002) improved 4. In conclusion, hens housed on pasture and fed multi-enzyme supplemented diets had significantly heavier body weight and produced heavier eggs with darker yolk colour. Pasture intake and enzyme supplementation increased digestive organ weight significantly.

Weight Measurements and Standards for Soldiers

DTIC Science & Technology

2013-10-01

Army National Guard (LANG) called Healthy Eating, Activity, and Lifestyle Training Headquarters (H.E.A.L.T.H.) (1). This program was designed to...program aims to empower Soldiers in healthy and safe lifestyle change to sustain healthy weight and performance on a year-round basis. The...mobile and is now able to be accessed and utilized via Smartphone devices, e.g. Droid, iphone, Blackberry. The launch of the program on 7 Smartphones

Composition of hydroponic lettuce: effect of time of day, plant size, and season.

PubMed

Gent, Martin P N

2012-02-01

The diurnal variation of nitrate and sugars in leafy green vegetables may vary with plant size or the ability of plants to buffer the uptake, synthesis, and use of metabolites. Bibb lettuce was grown in hydroponics in a greenhouse and sampled at 3 h intervals throughout one day in August 2007 and another day in November 2008 to determine fresh weight, dry matter, and concentration of nitrate and sugars. Plantings differing in size and age were sampled on each date. The dry/fresh weight ratio increased during the daylight period. This increase was greater for small compared to large plants. On a fresh weight basis, tissue nitrate of small plants was only half that of larger plants. The variation in concentration with time was much less for nitrate than for soluble sugars. Soluble sugars were similar for all plant sizes early in the day, but they increased far more for small compared to large plants in the long days of summer. The greatest yield on a fresh weight basis was obtained by harvesting lettuce at dawn. Although dry matter or sugar content increased later in the day, there is no commercial benefit to delaying harvest as consumers do not buy lettuce for these attributes. Copyright © 2011 Society of Chemical Industry.

Acute and sub-acute toxicological assessment of the aqueous seed extract of Persea americana mill (Lauraceae) in rats.

PubMed

Ozolua, Raymond I; Anaka, Ogochukwu N; Okpo, Stephen O; Idogun, Sylvester E

2009-07-03

The aqueous seed extract of Persea americana Mill (Lauraceae) is used by herbalists in Nigeria for the management of hypertension. As part of our on-going scientific evaluation of the extract, we designed the present study to assess its acute and sub-acute toxicity profiles in rats. Experiments were conducted to determine the oral median lethal dose (LD(50)) and other gross toxicological manifestations on acute basis. In the sub-acute experiments, the animals were administered 2.5 g/kg (p.o) per day of the extract for 28 consecutive days. Animal weight and fluid intake were recorded during the 28 days period. Terminally, kidneys, hearts, blood/sera were obtained for weight, haematological and biochemical markers of toxicity. Results show that the LD(50) could not be determined after a maximum dose of 10 g/kg. Sub-acute treatment with the extract neither affected whole body weight nor organ-to-body weight ratios but significantly increased the fluid intake (P < 0.0001). Haematological parameters and the levels of ALT, AST, albumin and creatinine were not significantly altered. However, the concentration of total proteins was significantly increased in the treated group. In conclusion, the aqueous seed extract of P. americana is safe on sub-acute basis but extremely high doses may not be advisable.

MR-guided dynamic PET reconstruction with the kernel method and spectral temporal basis functions

NASA Astrophysics Data System (ADS)

Novosad, Philip; Reader, Andrew J.

2016-06-01

Recent advances in dynamic positron emission tomography (PET) reconstruction have demonstrated that it is possible to achieve markedly improved end-point kinetic parameter maps by incorporating a temporal model of the radiotracer directly into the reconstruction algorithm. In this work we have developed a highly constrained, fully dynamic PET reconstruction algorithm incorporating both spectral analysis temporal basis functions and spatial basis functions derived from the kernel method applied to a co-registered T1-weighted magnetic resonance (MR) image. The dynamic PET image is modelled as a linear combination of spatial and temporal basis functions, and a maximum likelihood estimate for the coefficients can be found using the expectation-maximization (EM) algorithm. Following reconstruction, kinetic fitting using any temporal model of interest can be applied. Based on a BrainWeb T1-weighted MR phantom, we performed a realistic dynamic [18F]FDG simulation study with two noise levels, and investigated the quantitative performance of the proposed reconstruction algorithm, comparing it with reconstructions incorporating either spectral analysis temporal basis functions alone or kernel spatial basis functions alone, as well as with conventional frame-independent reconstruction. Compared to the other reconstruction algorithms, the proposed algorithm achieved superior performance, offering a decrease in spatially averaged pixel-level root-mean-square-error on post-reconstruction kinetic parametric maps in the grey/white matter, as well as in the tumours when they were present on the co-registered MR image. When the tumours were not visible in the MR image, reconstruction with the proposed algorithm performed similarly to reconstruction with spectral temporal basis functions and was superior to both conventional frame-independent reconstruction and frame-independent reconstruction with kernel spatial basis functions. Furthermore, we demonstrate that a joint spectral/kernel model can also be used for effective post-reconstruction denoising, through the use of an EM-like image-space algorithm. Finally, we applied the proposed algorithm to reconstruction of real high-resolution dynamic [11C]SCH23390 data, showing promising results.

MR-guided dynamic PET reconstruction with the kernel method and spectral temporal basis functions.

PubMed

Novosad, Philip; Reader, Andrew J

2016-06-21

Recent advances in dynamic positron emission tomography (PET) reconstruction have demonstrated that it is possible to achieve markedly improved end-point kinetic parameter maps by incorporating a temporal model of the radiotracer directly into the reconstruction algorithm. In this work we have developed a highly constrained, fully dynamic PET reconstruction algorithm incorporating both spectral analysis temporal basis functions and spatial basis functions derived from the kernel method applied to a co-registered T1-weighted magnetic resonance (MR) image. The dynamic PET image is modelled as a linear combination of spatial and temporal basis functions, and a maximum likelihood estimate for the coefficients can be found using the expectation-maximization (EM) algorithm. Following reconstruction, kinetic fitting using any temporal model of interest can be applied. Based on a BrainWeb T1-weighted MR phantom, we performed a realistic dynamic [(18)F]FDG simulation study with two noise levels, and investigated the quantitative performance of the proposed reconstruction algorithm, comparing it with reconstructions incorporating either spectral analysis temporal basis functions alone or kernel spatial basis functions alone, as well as with conventional frame-independent reconstruction. Compared to the other reconstruction algorithms, the proposed algorithm achieved superior performance, offering a decrease in spatially averaged pixel-level root-mean-square-error on post-reconstruction kinetic parametric maps in the grey/white matter, as well as in the tumours when they were present on the co-registered MR image. When the tumours were not visible in the MR image, reconstruction with the proposed algorithm performed similarly to reconstruction with spectral temporal basis functions and was superior to both conventional frame-independent reconstruction and frame-independent reconstruction with kernel spatial basis functions. Furthermore, we demonstrate that a joint spectral/kernel model can also be used for effective post-reconstruction denoising, through the use of an EM-like image-space algorithm. Finally, we applied the proposed algorithm to reconstruction of real high-resolution dynamic [(11)C]SCH23390 data, showing promising results.

Weight change with oral contraceptive use and during the menstrual cycle. Results of daily measurements.

PubMed

Rosenberg, M

1998-12-01

Although weight gain is among the most common complaints of women using oral contraceptives (OC) and a frequent reason for discontinuation, studies demonstrate little basis for this perception. We explored this issue by analyzing the daily weights of 128 women during four cycles of triphasic OC use. The mean weight at the end of the fourth cycle of use was the same as baseline weight (average weight change, 0.0 pounds). The largest proportion of women, 52%, remained within 2 pounds (0.9 kg) of their starting weight, and 72% of women had either no weight change or a loss. Over each menstrual cycle, regular but minor weight shifts were observed, with the mean weight rising by one-half pound (0.2 kg) during the first weeks of each cycle and falling by the same amount during the last few days. These results emphasize the lack of association of OC use with weight gain but OC may be blamed at least in part, based on cyclic fluctuations. Counseling should emphasize weight gain as a misperception and stress the fact that a highly effective and safe form of contraception should not be ruled out or discontinued because of concern about weight.

Adaptive critic autopilot design of bank-to-turn missiles using fuzzy basis function networks.

PubMed

Lin, Chuan-Kai

2005-04-01

A new adaptive critic autopilot design for bank-to-turn missiles is presented. In this paper, the architecture of adaptive critic learning scheme contains a fuzzy-basis-function-network based associative search element (ASE), which is employed to approximate nonlinear and complex functions of bank-to-turn missiles, and an adaptive critic element (ACE) generating the reinforcement signal to tune the associative search element. In the design of the adaptive critic autopilot, the control law receives signals from a fixed gain controller, an ASE and an adaptive robust element, which can eliminate approximation errors and disturbances. Traditional adaptive critic reinforcement learning is the problem faced by an agent that must learn behavior through trial-and-error interactions with a dynamic environment, however, the proposed tuning algorithm can significantly shorten the learning time by online tuning all parameters of fuzzy basis functions and weights of ASE and ACE. Moreover, the weight updating law derived from the Lyapunov stability theory is capable of guaranteeing both tracking performance and stability. Computer simulation results confirm the effectiveness of the proposed adaptive critic autopilot.

Dietary optimisation with omega-3 and omega-6 fatty acids for 12-23-month-old overweight and obese children in urban Jakarta.

PubMed

Cahyaningrum, Fitrianna; Permadhi, Inge; Ansari, Muhammad Ridwan; Prafiantini, Erfi; Rachman, Purnawati Hustina; Agustina, Rina

2016-12-01

Diets with a specific omega-6/omega-3 fatty acid ratio have been reported to have favourable effects in controlling obesity in adults. However, development a local-based diet by considering the ratio of these fatty acids for improving the nutritional status of overweight and obese children is lacking. Therefore, using linear programming, we developed an affordable optimised diet focusing on the ratio of omega- 6/omega-3 fatty acid intake for obese children aged 12-23 months. A crosssectional study was conducted in two subdistricts of East Jakarta involving 42 normal-weight and 29 overweight and obese children, grouped on the basis of their body mass index for-age Z scores and selected through multistage random sampling. A 24-h recall was performed for 3-nonconsecutive days to assess the children's dietary intake levels and food patterns. We conducted group and structured interviews as well as market surveys to identify food availability, accessibility and affordability. Three types of affordable optimised 7-day diet meal plans were developed on the basis of breastfeeding status. The optimised diet plan fulfilled energy and macronutrient intake requirements within the acceptable macronutrient distribution range. The omega-6/omega-3 fatty acid ratio in the children was between 4 and 10. Moreover, the micronutrient intake level was within the range of the recommended daily allowance or estimated average recommendation and tolerable upper intake level. The optimisation model used in this study provides a mathematical solution for economical diet meal plans that approximate the nutrient requirements for overweight and obese children.

12 CFR 225.22 - Exempt nonbanking activities and acquisitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... (ix) Selling, purchasing, or underwriting insurance, such as blanket bond insurance, group insurance... risk-weighted assets (on a consolidated basis) of the acquiring lending company or industrial bank, or...

12 CFR 225.22 - Exempt nonbanking activities and acquisitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... (ix) Selling, purchasing, or underwriting insurance, such as blanket bond insurance, group insurance... risk-weighted assets (on a consolidated basis) of the acquiring lending company or industrial bank, or...

12 CFR 225.22 - Exempt nonbanking activities and acquisitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... (ix) Selling, purchasing, or underwriting insurance, such as blanket bond insurance, group insurance... risk-weighted assets (on a consolidated basis) of the acquiring lending company or industrial bank, or...

A generalized watershed disturbance-invertebrate relation applicable in a range of environmental settings across the continental United States

USGS Publications Warehouse

Steuer, Jeffrey J.

2010-01-01

It is widely recognized that urbanization can affect ecological conditions in aquatic systems; numerous studies have identified impervious surface cover as an indicator of urban intensity and as an index of development at the watershed, regional, and national scale. Watershed percent imperviousness, a commonly understood urban metric was used as the basis for a generalized watershed disturbance metric that, when applied in conjunction with weighted percent agriculture and percent grassland, predicted stream biotic conditions based on Ephemeroptera, Plecoptera, and Trichoptera (EPT) richness across a wide range of environmental settings. Data were collected in streams that encompassed a wide range of watershed area (4.4-1,714 km), precipitation (38-204 cm/yr), and elevation (31-2,024 m) conditions. Nevertheless the simple 3-landcover disturbance metric accounted for 58% of the variability in EPT richness based on the 261 nationwide sites. On the metropolitan area scale, relationship r ranged from 0.04 to 0.74. At disturbance values 15. Future work may incorporate watershed management practices within the disturbance metric, further increasing the management applicability of the relation. Such relations developed on a regional or metropolitan area scale are likely to be stronger than geographically generalized models; as found in these EPT richness relations. However, broad spatial models are able to provide much needed understanding in unmonitored areas and provide initial guidance for stream potential.

Composition and application of novel sprayable phosphate cement (grancrete) that bonds to styrofoam

DOEpatents

Wagh, Arun S.; Paul, Jr., James W.

2007-01-09

A dry mix particulate composition of a calcined oxide of Mg and/or Ca, an acid phosphate, and fly ash or equivalent, wherein the calcined oxide is present in the range of from about 17% to about 40% by weight and the acid phosphate is present in the range of from about 29% to about 52% by weight and the fly ash or equivalent is present in the range of from about 24% to about 39% by weight when sand is added to the dry mix, it is present in the range of from about 39% to about 61% by weight of the combined dry mix and sand. A method of forming a structural member is also disclosed wherein an aqueous slurry of about 8 12 pounds of water is added to dry mix and sand.

An Economic Evaluation of a Weight Loss Intervention Program for People with Serious Mental Illnesses Taking Antipsychotic Medications.

PubMed

Meenan, Richard T; Stumbo, Scott P; Yarborough, Micah T; Leo, Michael C; Yarborough, Bobbi Jo H; Green, Carla A

2016-07-01

Individuals with serious mental illnesses suffer from obesity and cardiometabolic diseases at high rates, and antipsychotic medications exacerbate these conditions. While studies have shown weight loss and lifestyle interventions can be effective in this population, few have assessed intervention cost-effectiveness. We present results from a 12-month randomized controlled trial that reduced weight, fasting glucose, and medical hospitalizations in intervention participants. Costs per participant ranged from $4365 to $5687. Costs to reduce weight by one kilogram ranged from $1623 to $2114; costs to reduce fasting glucose by 1 mg/dL ranged from $467 to $608. Medical hospitalization costs were reduced by $137,500.

Application of multivariable search techniques to structural design optimization

NASA Technical Reports Server (NTRS)

Jones, R. T.; Hague, D. S.

1972-01-01

Multivariable optimization techniques are applied to a particular class of minimum weight structural design problems: the design of an axially loaded, pressurized, stiffened cylinder. Minimum weight designs are obtained by a variety of search algorithms: first- and second-order, elemental perturbation, and randomized techniques. An exterior penalty function approach to constrained minimization is employed. Some comparisons are made with solutions obtained by an interior penalty function procedure. In general, it would appear that an interior penalty function approach may not be as well suited to the class of design problems considered as the exterior penalty function approach. It is also shown that a combination of search algorithms will tend to arrive at an extremal design in a more reliable manner than a single algorithm. The effect of incorporating realistic geometrical constraints on stiffener cross-sections is investigated. A limited comparison is made between minimum weight cylinders designed on the basis of a linear stability analysis and cylinders designed on the basis of empirical buckling data. Finally, a technique for locating more than one extremal is demonstrated.

Singular value decomposition: a diagnostic tool for ill-posed inverse problems in optical computed tomography

NASA Astrophysics Data System (ADS)

Lanen, Theo A.; Watt, David W.

1995-10-01

Singular value decomposition has served as a diagnostic tool in optical computed tomography by using its capability to provide insight into the condition of ill-posed inverse problems. Various tomographic geometries are compared to one another through the singular value spectrum of their weight matrices. The number of significant singular values in the singular value spectrum of a weight matrix is a quantitative measure of the condition of the system of linear equations defined by a tomographic geometery. The analysis involves variation of the following five parameters, characterizing a tomographic geometry: 1) the spatial resolution of the reconstruction domain, 2) the number of views, 3) the number of projection rays per view, 4) the total observation angle spanned by the views, and 5) the selected basis function. Five local basis functions are considered: the square pulse, the triangle, the cubic B-spline, the Hanning window, and the Gaussian distribution. Also items like the presence of noise in the views, the coding accuracy of the weight matrix, as well as the accuracy of the accuracy of the singular value decomposition procedure itself are assessed.

An anthropomorphic multimodality (CT/MRI) head phantom prototype for end-to-end tests in ion radiotherapy.

PubMed

Gallas, Raya R; Hünemohr, Nora; Runz, Armin; Niebuhr, Nina I; Jäkel, Oliver; Greilich, Steffen

2015-12-01

With the increasing complexity of external beam therapy "end-to-end" tests are intended to cover every step from therapy planning through to follow-up in order to fulfill the higher demands on quality assurance. As magnetic resonance imaging (MRI) has become an important part of the treatment process, established phantoms such as the Alderson head cannot fully be used for those tests and novel phantoms have to be developed. Here, we present a feasibility study of a customizable multimodality head phantom. It is initially intended for ion radiotherapy but may also be used in photon therapy. As basis for the anthropomorphic head shape we have used a set of patient computed tomography (CT) images. The phantom recipient consisting of epoxy resin was produced by using a 3D printer. It includes a nasal air cavity, a cranial bone surrogate (based on dipotassium phosphate), a brain surrogate (based on agarose gel), and a surrogate for cerebrospinal fluid (based on distilled water). Furthermore, a volume filled with normoxic dosimetric gel mimicked a tumor. The entire workflow of a proton therapy could be successfully applied to the phantom. CT measurements revealed CT numbers agreeing with reference values for all surrogates in the range from 2 HU to 978 HU (120 kV). MRI showed the desired contrasts between the different phantom materials especially in T2-weighted images (except for the bone surrogate). T2-weighted readout of the polymerization gel dosimeter allowed approximate range verification. Copyright © 2015. Published by Elsevier GmbH.

Mechanical Properties of LaRC(tm) SI Polymer for a Range of Molecular Weights

NASA Technical Reports Server (NTRS)

Whitley, Karen S.; Gates, Thomas S.; Hinkley, Jeffrey A.; Nicholson, Lee M.

2000-01-01

Mechanical testing of an advanced polyimide resin (LaRC(tm)-SI) with known variations in molecular weight was performed over a range of temperatures below the glass transition temperature. Elastic and inelastic properties were characterized as a function of molecular weight and test temperature. It was shown that notched tensile strength is a strong function of both temperature and molecular weight, whereas stiffness is only a strong function of temperature. The combined analysis of calculated yield stress and notched tensile strength indicated that low molecular weight materials tended to fail in a brittle manner, whereas high molecular weight materials exhibited ductile failure. The microphotographs of the failure surfaces also supported these findings.

21 CFR 172.841 - Polydextrose.

Code of Federal Regulations, 2014 CFR

2014-04-01

...-glucose, 10 percent sorbitol, and 1 percent citric acid or of approximately 90 percent D-glucose, 10 percent sorbitol, and 0.1 percent phosphoric acid, on a weight basis. (2) Polydextrose may be partially...

Dietary treatments of obesity.

PubMed

Moloney, M

2000-11-01

Numerous dietary treatments that purport to promote something unique for stimulating weight loss have been published. These treatments include fad diets, diets formulated by various commercial slimming clubs, very-low-energy diets (VLCD) and conventional diets. Fad diets may possibly reduce some weight short-term; however, there is no scientific basis to their long-term use. Commercial slimming clubs may be suitable for some individuals but they need to be properly assessed professionally. There are specific guidelines for the use of VLCD, which are only appropriate for short-term use. There is scientific evidence to suggest that conventional diets can produce both short- and long-term weight loss. A successful weight-loss programme depends on a multidisciplinary team approach. Management strategies should be devised for addressing issues such as goals, monitoring, follow-up, relapse and evaluation. Initial assessments should include medical, laboratory and anthropometric data, fitness level and dietary and behavioural attitudes. These results will form the basis of the treatment plan. Frequent visits to the clinic are fundamental in promoting continuing weight loss during the long-term maintenance stage of treatment. The visits should be made worthwhile for the patient. Realistic and attainable goals for diet, exercise and behaviour modification should be made. The diet should have a novel approach and be tailored to the needs of the patient. It should be adequate nutritionally, low in energy and fat. The overall aim should be to promote lifelong changes in lifestyle, improvement in quality of life and health risks.

Features of Extrusion Processing of Ultrahigh Molecular Weight Polyethylene. Experiment and Theory

NASA Astrophysics Data System (ADS)

Skul‧skii, O. I.; Slavnov, E. V.

2018-05-01

Experimental studies have been made of the permissible regimes of processing ultrahigh molecular weight polyethylene GUR 2122 with molecular mass of 4.5 million g/moles in a laboratory extruder with an auger diameter 32 mm and a ratio L/D = 20 at temperatures of 155-165oC. On the basis of rotational viscometry, the rheological properties of the melt are described. A mathematical model and a numerical method for calculating the motion of ultrahigh molecular weight polyethylene melt in the auger and in the moulding rigging are proposed. The velocity and stress fields have been determined.

Are early first trimester weights valid proxies for preconception weight?

USDA-ARS?s Scientific Manuscript database

An accurate estimate of preconception weight is necessary for providing a gestational weight gain range based on the Institute of Medicine’s guidelines; however, an accurate and proximal preconception weight is not available for most women. We examined the validity of first trimester weights for est...

Obesity-related metabolic dysfunction in dogs: a comparison with human metabolic syndrome.

PubMed

Tvarijonaviciute, Asta; Ceron, Jose J; Holden, Shelley L; Cuthbertson, Daniel J; Biourge, Vincent; Morris, Penelope J; German, Alexander J

2012-08-28

Recently, metabolic syndrome (MS) has gained attention in human metabolic medicine given its associations with development of type 2 diabetes mellitus and cardiovascular disease. Canine obesity is associated with the development of insulin resistance, dyslipidaemia, and mild hypertension, but the authors are not aware of any existing studies examining the existence or prevalence of MS in obese dogs.Thirty-five obese dogs were assessed before and after weight loss (median percentage loss 29%, range 10-44%). The diagnostic criteria of the International Diabetes Federation were modified in order to define canine obesity-related metabolic dysfunction (ORMD), which included a measure of adiposity (using a 9-point body condition score [BCS]), systolic blood pressure, fasting plasma cholesterol, plasma triglyceride, and fasting plasma glucose. By way of comparison, total body fat mass was measured by dual-energy X-ray absorptiometry, whilst total adiponectin, fasting insulin, and high-sensitivity C-reactive protein (hsCRP) were measured using validated assays. Systolic blood pressure (P = 0.008), cholesterol (P = 0.003), triglyceride (P = 0.018), and fasting insulin (P < 0.001) all decreased after weight loss, whilst plasma total adiponectin increased (P = 0.001). However, hsCRP did not change with weight loss. Prior to weight loss, 7 dogs were defined as having ORMD, and there was no difference in total fat mass between these dogs and those who did not meet the criteria for ORMD. However, plasma adiponectin concentration was less (P = 0.031), and plasma insulin concentration was greater (P = 0.030) in ORMD dogs. In this study, approximately 20% of obese dogs suffer from ORMD, and this is characterized by hypoadiponectinaemia and hyperinsulinaemia. These studies can form the basis of further investigations to determine path genetic mechanisms and the health significance for dogs, in terms of disease associations and outcomes of weight loss.

Obesity-related metabolic dysfunction in dogs: a comparison with human metabolic syndrome

PubMed Central

2012-01-01

Background Recently, metabolic syndrome (MS) has gained attention in human metabolic medicine given its associations with development of type 2 diabetes mellitus and cardiovascular disease. Canine obesity is associated with the development of insulin resistance, dyslipidaemia, and mild hypertension, but the authors are not aware of any existing studies examining the existence or prevalence of MS in obese dogs. Thirty-five obese dogs were assessed before and after weight loss (median percentage loss 29%, range 10-44%). The diagnostic criteria of the International Diabetes Federation were modified in order to define canine obesity-related metabolic dysfunction (ORMD), which included a measure of adiposity (using a 9-point body condition score [BCS]), systolic blood pressure, fasting plasma cholesterol, plasma triglyceride, and fasting plasma glucose. By way of comparison, total body fat mass was measured by dual-energy X-ray absorptiometry, whilst total adiponectin, fasting insulin, and high-sensitivity C-reactive protein (hsCRP) were measured using validated assays. Results Systolic blood pressure (P = 0.008), cholesterol (P = 0.003), triglyceride (P = 0.018), and fasting insulin (P < 0.001) all decreased after weight loss, whilst plasma total adiponectin increased (P = 0.001). However, hsCRP did not change with weight loss. Prior to weight loss, 7 dogs were defined as having ORMD, and there was no difference in total fat mass between these dogs and those who did not meet the criteria for ORMD. However, plasma adiponectin concentration was less (P = 0.031), and plasma insulin concentration was greater (P = 0.030) in ORMD dogs. Conclusions In this study, approximately 20% of obese dogs suffer from ORMD, and this is characterized by hypoadiponectinaemia and hyperinsulinaemia. These studies can form the basis of further investigations to determine path genetic mechanisms and the health significance for dogs, in terms of disease associations and outcomes of weight loss. PMID:22929809

The Obesity Epidemic in the Veterans Health Administration: Prevalence Among Key Populations of Women and Men Veterans.

PubMed

Breland, Jessica Y; Phibbs, Ciaran S; Hoggatt, Katherine J; Washington, Donna L; Lee, Jimmy; Haskell, Sally; Uchendu, Uchenna S; Saechao, Fay S; Zephyrin, Laurie C; Frayne, Susan M

2017-04-01

Most US adults are overweight or obese. Understanding differences in obesity prevalence across subpopulations could facilitate the development and dissemination of weight management services. To inform Veterans Health Administration (VHA) weight management initiatives, we describe obesity prevalence among subpopulations of VHA patients. Cross-sectional descriptive analyses of fiscal year 2014 (FY2014) national VHA administrative and clinical data, stratified by gender. Differences ≥5% higher than the population mean were considered clinically significant. Veteran VHA primary care patients with a valid weight within ±365 days of their first FY2014 primary care visit, and a valid height (98% of primary care patients). We used VHA vital signs data to ascertain height and weight and calculate body mass index, and VHA outpatient, inpatient, and fee basis data to identify sociodemographic- and comorbidity-based subpopulations. Among nearly five million primary care patients (347,112 women, 4,567,096 men), obesity prevalence was 41% (women 44%, men 41%), and overweight prevalence was 37% (women 31%, men 38%). Across the VHA's 140 facilities, obesity prevalence ranged from 28% to 49%. Among gender-stratified subpopulations, obesity prevalence was high among veterans under age 65 (age 18-44: women 40%, men 46%; age 45-64: women 49%, men 48%). Obesity prevalence varied across racial/ethnic and comorbidity subpopulations, with high obesity prevalence among black women (51%), women with schizophrenia (56%), and women and men with diabetes (68%, 56%). Overweight and obesity are common among veterans served by the VHA. VHA's weight management initiatives have the potential to avert long-term morbidity arising from obesity-related conditions. High-risk groups-such as black women veterans, women veterans with schizophrenia, younger veterans, and Native Hawaiian/Other Pacific Islander and American Indian/Alaska Native veterans-may require particular attention to ensure that systems improvement efforts at the population level do not inadvertently increase health disparities.

Subchronic toxicity study in vivo and allergenicity study in vitro for genetically modified rice that expresses pharmaceutical protein (human serum albumin).

PubMed

Sheng, Yao; Qi, Xiaozhe; Liu, Yifei; Guo, Mingzhang; Chen, Siyuan; He, Xiaoyun; Huang, Kunlun; Xu, Wentao

2014-10-01

Genetically modified (GM) crops that express pharmaceutical proteins have become an important focus of recent genetic engineering research. Food safety assessment is necessary for the commercial development of these crops. Subchronic toxicity study in vivo and allergenicity study in vitro were designed to evaluate the food safety of the rice variety expressing human serum albumin (HSA). Animals were fed rodent diets containing 12.5%, 25.0% and 50.0% GM or non-GM rice for 90 days. The composition analysis of the GM rice demonstrated several significant differences. However, most of the differences remained within the ranges reported in the literature. In the animal study, a range of indexes including clinical observation, feed efficiency, hematology, serum chemistry, organ weights and histopathology were examined. Random changes unrelated to the GM rice exposure, within the range of historical control values and not associated with any signs of illness were observed. The results of heat stability and in vitro digestion of HSA indicated no evidence of potential allergenicity of the protein. Overall, the results of these studies suggest that the GM rice appears to be safe as a dietary ingredient when it is used at up to 50% in the diet on a subchronic basis. Copyright © 2014 Elsevier Ltd. All rights reserved.

A research coding method for the basic patient-centered interview.

PubMed

Grayson-Sneed, Katelyn A; Smith, Sandi W; Smith, Robert C

2017-03-01

To develop a more reliable coding method of medical interviewing focused on data-gathering and emotion-handling. Two trained (30h) undergraduates rated videotaped interviews from 127 resident-simulated patient (SP) interactions. Trained on 45 videotapes, raters coded 25 of 127 study set tapes for patient-centeredness. Guetzkow's U, Cohen's Kappa, and percent of agreement were used to measure raters' reliability in unitizing and coding residents' skills for eliciting: agenda (3 yes/no items), physical story (2), personal story (6), emotional story (15), using indirect skills (4), and general patient-centeredness (3). 45 items were dichotomized from the earlier, Likert scale-based method and were reduced to 33 during training. Guetzkow's U ranged from 0.00 to 0.087. Kappa ranged from 0.86 to 1.00 for the 6 variables and 33 individual items. The overall kappa was 0.90, and percent of agreement was 97.5%. Percent of agreement by item ranged from 84 to 100%. A simple, highly reliable coding method, weighted (by no. of items) to highlight personal elements of an interview, was developed and is recommended as a criterion standard research coding method. An easily conducted, reliable coding procedure can be the basis for everyday questionnaires like patient satisfaction with patient-centeredness. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Meat Science and Muscle Biology Symposium: in utero nutrition related to fetal development, postnatal performance, and meat quality of pork.

PubMed

Oksbjerg, N; Nissen, P M; Therkildsen, M; Møller, H S; Larsen, L B; Andersen, M; Young, J F

2013-03-01

Intrauterine growth restriction (IUGR) occurs naturally in pigs and leads to low birth weight of piglets due to undernutrition caused by placental insufficiency. For 2 main reasons, low birth weight causes economic loss. First, low birth weight pigs have a greater mortality and increasing the litter size causes more low birth weight piglets within litters. Second, surviving low birth weight piglets have reduced performance (i.e., ADG, feed conversion rate, and percentage meat). To develop dietary strategies for preventing IUGR, knowledge of the biological basis of IUGR is required. Muscle fiber number, formed during myogenesis, is correlated positively with performance traits and has been shown in several studies to be reduced in low birth weight pigs. Postnatal muscle hypertrophy is due to satellite cell number per fiber at birth and their rate of proliferation as well as protein deposition (i.e., protein synthesis and degradation). Previous studies and some recent ones indicate that low birth weight littermates in mice are born with fewer satellite cells and studies on pigs show that the rate of satellite cell proliferation may vary within litters. Proteomics studies show that protein synthesis and degradation is downregulated in IUGR pigs and low birth weight pigs also produce meat with less tenderness. Alternative maternal feeding strategies to prevent IUGR have been examined. Increasing maternal global nutrition had no beneficial effect on performance and muscle growth traits in several studies. Feeding excess maternal dietary protein also did not influence muscle growth traits whereas moderately decreased maternal dietary protein may decrease muscle fiber number and performance. On the other hand, addition of L-carnitine to the maternal gestation or lactation diet may increase birth and weaning weights or the muscle fiber number, respectively, in low birth weight pig offspring. Finally, promising data have been obtained on reproductive traits in pigs after addition of functional AA, such as arginine and glutamine, to the gestational diet. Although much is known about the biological basis of IUGR, we still need to learn much more about the mode of action before maternal dietary strategies can be developed to prevent IUGR.

78 FR 9370 - Notice of Scope Rulings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-08

... with a basis weight of 210 gsm, and APP's blue-, grey-, and black-center playing card board which APP... Honey Producers Association and the Sioux Honey Association; blends of honey and rice syrup, regardless...

7 CFR 4284.913 - Evaluation criteria and weights.

Code of Federal Regulations, 2011 CFR

2011-01-01

... established in the applicable RFP. (b) Working Capital Grants—(1) Business viability. Proposals will be evaluated on the basis of the technical and economic feasibility and sustainability of the venture and the...

7 CFR 4284.913 - Evaluation criteria and weights.

Code of Federal Regulations, 2010 CFR

2010-01-01

... established in the applicable RFP. (b) Working Capital Grants—(1) Business viability. Proposals will be evaluated on the basis of the technical and economic feasibility and sustainability of the venture and the...

7 CFR 993.57 - Holding requirement and delivery.

Code of Federal Regulations, 2013 CFR

2013-01-01

... SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE DRIED... § 993.58(a); (b) of prune plums (dried weight natural condition basis) diverted pursuant to § 993.62 as...

7 CFR 993.57 - Holding requirement and delivery.

Code of Federal Regulations, 2010 CFR

2010-01-01

... SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE DRIED... § 993.58(a); (b) of prune plums (dried weight natural condition basis) diverted pursuant to § 993.62 as...

7 CFR 993.57 - Holding requirement and delivery.

Code of Federal Regulations, 2014 CFR

2014-01-01

... SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE DRIED... § 993.58(a); (b) of prune plums (dried weight natural condition basis) diverted pursuant to § 993.62 as...

7 CFR 993.57 - Holding requirement and delivery.

Code of Federal Regulations, 2012 CFR

2012-01-01

... SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE DRIED... § 993.58(a); (b) of prune plums (dried weight natural condition basis) diverted pursuant to § 993.62 as...

7 CFR 993.57 - Holding requirement and delivery.

Code of Federal Regulations, 2011 CFR

2011-01-01

... SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE DRIED... § 993.58(a); (b) of prune plums (dried weight natural condition basis) diverted pursuant to § 993.62 as...

On vector-valued Poincaré series of weight 2

NASA Astrophysics Data System (ADS)

Meneses, Claudio

2017-10-01

Given a pair (Γ , ρ) of a Fuchsian group of the first kind, and a unitary representation ρ of Γ of arbitrary rank, the problem of construction of vector-valued Poincaré series of weight 2 is considered. Implications in the theory of parabolic bundles are discussed. When the genus of the group is zero, it is shown how an explicit basis for the space of these functions can be constructed.

A cautionary note concerning the use of stabilized weights in marginal structural models.

PubMed

Talbot, Denis; Atherton, Juli; Rossi, Amanda M; Bacon, Simon L; Lefebvre, Geneviève

2015-02-28

Marginal structural models are commonly used to estimate the causal effect of a time-varying treatment in presence of time-dependent confounding. When fitting an MSM to data, the analyst must specify both the structural model for the outcome and the treatment models for the inverse-probability-of-treatment weights. The use of stabilized weights is recommended because they are generally less variable than the standard weights. In this paper, we are concerned with the use of the common stabilized weights when the structural model is specified to only consider partial treatment history, such as the current or most recent treatments. We present various examples of settings where these stabilized weights yield biased inferences while the standard weights do not. These issues are first investigated on the basis of simulated data and subsequently exemplified using data from the Honolulu Heart Program. Unlike common stabilized weights, we find that basic stabilized weights offer some protection against bias in structural models designed to estimate current or most recent treatment effects. Copyright © 2014 John Wiley & Sons, Ltd.

Reconnaissance investigation of water quality, bottom sediment, and biota associated with irrigation drainage in the Lower Rio Grande Valley and Laguna Atascosa National Wildlife Refuge, Texas, 1986-87

USGS Publications Warehouse

Wells, Frank C.; Jackson, Gerry A.; Rogers, William J.

1988-01-01

Toxaphene was detected in 11 fish samples; detectable concentrations ranged from 0.98 to 5.1 micrograms per gram, wet weight. DOT also was detected in 11 fish samples with concentrations ranging from 0.021 to 0.066 micrograms per gram, wet weight. ODD was detected in 21 fish samples; concentrations ranged from 0.015 to 0.16 micrograms per gram, wet weight. DDE was detected in all 22 fish samples, and concentrations ranged from 0.36 to 9.9 micrograms per gram, wet weight. The maximum concentrations of DOT and ODD exceeded the 1980-81 baseline concentrations. The median and maximum concentrations of toxaphene and DDE exceeded the 1980-81 baseline concentrations. The largest concentrations of toxaphene, ODD, and DDE in fish were all measured in samples collected at the Main Floodway near Progreso.

Quality of life in overweight and obese young Chinese children: a mixed-method study

PubMed Central

2013-01-01

Background Obesity among young children in Hong Kong has become a public health problem. This study explored associations between Chinese parent reported children’s quality of life (QoL), socio-demographics and young children’s weight status from 27 preschool settings. Methods A mixed-method approach, including quantitative and qualitative tools, was employed for this cross-sectional study. Quantitative data were collected from 336 Chinese parents of children aged 2–7 years. Paediatric Quality of Life Inventory 4.0 (PedsQL, v 4.0) and a questionnaire about parents’ socio-demographics were used. In-depth interviews with mothers, teachers and children from a larger sample were the basis of 10 case studies. Quantitative data were analysed using chi-square analysis, one-way ANOVA and logistic regression. Qualitative data were analysed according to a multi-level framework that established linkages with quantitative data. Results The children’s Body Mass Index (BMI) ranged from 11.3 to 28.0 kg/m2 and was classified into four weight groups. ANOVAs showed that the normal-weight children had significantly higher PedsQL scores in Physical Functioning than obese children (mean difference = 14.19, p < .0083) and significantly higher scores in School Functioning than overweight children (mean difference = 10.15, p < .0083). Results of logistic regression showed that relative to normal-weight children, obese children had a 2–5 times higher odds of showing problems in Physical, Social Functioning and School Performance. Overweight children had 2 times higher odds of problems in Social Functioning, and underweight children had a 2 times higher odds of problems in Physical Functioning. Children’s age (χ2 = 21.71, df = 3, p < 0.01), and housing (χ2 = 33.00, df = 9, p < 0.01) were associated with their weight. The case studies further act as a supplement to the quantitative data that children showed emotional problems across different abnormal weight statues; and the association between children’s weight status and well-being might be affected by multiple childcare arrangements and familial immigration status. Conclusions This study is one of only a few studies that have examined parents’, teachers’ and young children’s own perceptions of the children’s quality of life across different weight statuses. The results are discussed in terms of their implications for intervention. PMID:23496917

Life cycle impact assessment weights to support environmentally preferable purchasing in the United States.

PubMed

Gloria, Thomas P; Lippiatt, Barbara C; Cooper, Jennifer

2007-11-01

LCA is a quantitative method for understanding the environmental impacts of a product, yet all product purchasing decisions are ultimately subjective. Weights are the nexus between the quantitative results of LCA and the values-based, subjective choices of decision makers. In May 2007, NIST introduced a new optional weight set in Version 4.0 of the BEES software. Three key points about this new optional weight set are the basis for discussion in this paper: The new weight set was created specifically in the context of BEES. It is intended to support a practical method to assist environmentally preferable purchasing in the United States based on LCIA results. This is in contrast to the weight sets currently in BEES, which are based on generalist perspectives. The new weight set was created by a multi-stakeholder panel via the AHP method, and is a synthesis of panelists' perspectives on the relative importance of each environmental impact category in BEES. The weight set draws on each panelist's personal and professional understanding of, and value attributed to, each impact category. While the synthesized weight set may not equally satisfy each panelist's view of impact importance, it does reflect contemporary values in applying LCAto real world decisions, and represents one approach others can learn from in producing weight sets. The new weight set offers BEES users an additional option for synthesizing and comparing the environmental performance of building products and making purchasing decisions. In so doing, it strengthens the decision-making process, which is important when making product comparisons in the public domain. The Weight Set: Across all panelists and with explicit consideration of all time horizons, anthropogenic contributions to global warming, weighted at 29%, was judged most important, yet not so important that decisions can be made solely on the basis of this impact. A strong tail of other concerns include fossil fuel depletion (10%), criteria air pollutants (9%), water intake/use (8%), human health cancerous effects (8%), ecological toxicity (7%), eutrophication of water bodies (6%), land use (6%), and human health noncancerous effects (5%). Also of interest are the identified impact areas of concern assigned the lowest weights: smog formation (4%), indoor air quality (3%), acidification (3%), and ozone depletion (2%). Their low weights may indicate that there is not as much immediate concern or that the remedial actions associated with the impact for the most part are underway.

Models of energy homeostasis in response to maintenance of reduced body weight

PubMed Central

Rosenbaum, Michael; Leibel, Rudolph L.

2016-01-01

Objective To test 3 proposed models for adaptive thermogenesis in compartments of energy expenditure following different degrees of weight loss. Specifically, 1.) There is no adaptive thermogenesis (constant relationship of energy expenditure (EE) to metabolic mass). 2.) There is a fixed degree of adaptive thermogenesis once fat stores are below a “threshold”. 3.) The degree of adaptive thermogenesis is proportional to weight loss. Methods The relationship between weight loss and EE was examined in seventeen weight stable in-patient subjects with obesity studied at usual weight and again following a 10% and a 20% weight loss. Results Following initial weight loss (10%), resting (REE) and non-resting (NREE) EE were significantly below those predicted on the basis of the amount and composition of weight lost. Further reductions below predicted values of NREE but not REE occurred following an additional 10% weight loss. Changes in body weight, composition, and/or energy stores were significantly correlated with changes in EE. Conclusion All models are applicable to the decline in EE following weight loss. The disproportionate decline in REE is consistent with a threshold model (no change with further weight loss) while the disproportionate decline in NREE is largely reflective of the degree of weight loss. PMID:27460711

Do body mass index and fat volume influence vocal quality, phonatory range, and aerodynamics in females?

PubMed

Barsties, Ben; Verfaillie, Rudi; Roy, Nelson; Maryn, Youri

2013-01-01

To analyze the impact of body weight and body fat volume on selected parameters of vocal quality, phonatory range, and aerodynamics in females. Based on measurements of body mass index in combination with body fat volume, 29 normophonic female subjects were classified as normal weight, underweight, and obese. Voice quality was investigated via auditory-perceptual ratings of breathiness, roughness, and overall dysphonia severity, via various acoustic measures and a multiparametric index. Phonatory range performance was examined using selected measures of the voice range profile and speech range profile. Measures of vocally relevant aerodynamics included vital capacity (i.e., VC), expected VC, phonation quotient, and maximum phonation time (i.e., MPT). Significant differences between the three weight groups were found across several measures of intensity, VC, MPT, and shimmer. As compared to the other groups, significantly higher values of maximum and minimum intensity levels, as well as sound pressure level during habitual running speech were observed for the obese group (all p-values<0.05); whereas, the underweight group had significantly lower values for VC and ratio of expected to measured VC (p-values<0.01). Furthermore, underweight subjects differed significantly as compared to normal weight subjects with lower MPT (p=0.025) and higher lowest-F0 (p=0.035). Finally the obese group showed significantly lower shimmer values than the normal weight subjects (p<0.05). Body weight and body fat volume appear to influence select objective measures of voice quality, vocal aerodynamics, and phonatory range performance.

Evaluation of active cooling systems for a Mach 6 hypersonic transport airframe, part 2

NASA Technical Reports Server (NTRS)

Helenbrook, R. G.; Mcconarty, W. A.; Anthony, F. M.

1971-01-01

Transpiration and convective cooling concepts are examined for the fuselage and tail surface of a Mach 6 hypersonic transport aircraft. Hydrogen, helium, and water are considered as coolants. Heat shields and radiation barriers are examined to reduce heat flow to the cooled structures. The weight and insulation requirements for the cryogenic fuel tanks are examined so that realistic totals can be estimated for the complete fuselage and tail. Structural temperatures are varied to allow comparison of aluminum alloy, titanium alloy, and superalloy contruction materials. The results of the study are combined with results obtained on the wing structure, obtained in a previous study, to estimate weights for the complete airframe. The concepts are compared among themselves, and with the uncooled concept on the basis of structural weight, cooling system weight, and coolant weight.

A Regularizer Approach for RBF Networks Under the Concurrent Weight Failure Situation.

PubMed

Leung, Chi-Sing; Wan, Wai Yan; Feng, Ruibin

2017-06-01

Many existing results on fault-tolerant algorithms focus on the single fault source situation, where a trained network is affected by one kind of weight failure. In fact, a trained network may be affected by multiple kinds of weight failure. This paper first studies how the open weight fault and the multiplicative weight noise degrade the performance of radial basis function (RBF) networks. Afterward, we define the objective function for training fault-tolerant RBF networks. Based on the objective function, we then develop two learning algorithms, one batch mode and one online mode. Besides, the convergent conditions of our online algorithm are investigated. Finally, we develop a formula to estimate the test set error of faulty networks trained from our approach. This formula helps us to optimize some tuning parameters, such as RBF width.

The performance evaluation model of mining project founded on the weight optimization entropy value method

NASA Astrophysics Data System (ADS)

Mao, Chao; Chen, Shou

2017-01-01

According to the traditional entropy value method still have low evaluation accuracy when evaluating the performance of mining projects, a performance evaluation model of mineral project founded on improved entropy is proposed. First establish a new weight assignment model founded on compatible matrix analysis of analytic hierarchy process (AHP) and entropy value method, when the compatibility matrix analysis to achieve consistency requirements, if it has differences between subjective weights and objective weights, moderately adjust both proportions, then on this basis, the fuzzy evaluation matrix for performance evaluation. The simulation experiments show that, compared with traditional entropy and compatible matrix analysis method, the proposed performance evaluation model of mining project based on improved entropy value method has higher accuracy assessment.

Soft learning vector quantization and clustering algorithms based on ordered weighted aggregation operators.

PubMed

Karayiannis, N B

2000-01-01

This paper presents the development and investigates the properties of ordered weighted learning vector quantization (LVQ) and clustering algorithms. These algorithms are developed by using gradient descent to minimize reformulation functions based on aggregation operators. An axiomatic approach provides conditions for selecting aggregation operators that lead to admissible reformulation functions. Minimization of admissible reformulation functions based on ordered weighted aggregation operators produces a family of soft LVQ and clustering algorithms, which includes fuzzy LVQ and clustering algorithms as special cases. The proposed LVQ and clustering algorithms are used to perform segmentation of magnetic resonance (MR) images of the brain. The diagnostic value of the segmented MR images provides the basis for evaluating a variety of ordered weighted LVQ and clustering algorithms.

A Dual-Range Strain Gage Weighing Transducer Employing Automatic Switching

Treesearch

Rodger A. Arola

1968-01-01

Describes a dual-range strain gage transducer which has proven to be an excellent weight-sensing device for weighing trees and tree-length logs; discusses basic principals of the design and operation; and shows that a single transducer having two sensitivity ranges with automatic internal switching can sense weight with good repeatability and that one calibration curve...

Tuning the Perfluorosulfonic Acid Membrane Morphology for Vanadium Redox-Flow Batteries.

PubMed

Vijayakumar, M; Luo, Qingtao; Lloyd, Ralph; Nie, Zimin; Wei, Xiaoliang; Li, Bin; Sprenkle, Vincent; Londono, J-David; Unlu, Murat; Wang, Wei

2016-12-21

The microstructure of perfluorinated sulfonic acid proton-exchange membranes such as Nafion significantly affects their transport properties and performance in a vanadium redox-flow battery (VRB). In this work, Nafion membranes with various equivalent weights ranging from 1000 to 1500 are prepared and the morphology-property-performance relationship is investigated. NMR and small-angle X-ray scattering studies revealed their composition and morphology variances, which lead to major differences in key transport properties related to proton conduction and vanadium-ion permeation. Their performances are further characterized as VRB membranes. On the basis of this understanding, a new perfluorosulfonic acid membrane is designed with optimal pore geometry and thickness, leading to higher ion selectivity and lower cost compared with the widely used Nafion 115. Excellent VRB single-cell performance (89.3% energy efficiency at 50 mA·cm -2 ) was achieved along with a stable cyclical capacity over prolonged cycling.

Nonlinear Modeling by Assembling Piecewise Linear Models

NASA Technical Reports Server (NTRS)

Yao, Weigang; Liou, Meng-Sing

2013-01-01

To preserve nonlinearity of a full order system over a parameters range of interest, we propose a simple modeling approach by assembling a set of piecewise local solutions, including the first-order Taylor series terms expanded about some sampling states. The work by Rewienski and White inspired our use of piecewise linear local solutions. The assembly of these local approximations is accomplished by assigning nonlinear weights, through radial basis functions in this study. The efficacy of the proposed procedure is validated for a two-dimensional airfoil moving at different Mach numbers and pitching motions, under which the flow exhibits prominent nonlinear behaviors. All results confirm that our nonlinear model is accurate and stable for predicting not only aerodynamic forces but also detailed flowfields. Moreover, the model is robustness-accurate for inputs considerably different from the base trajectory in form and magnitude. This modeling preserves nonlinearity of the problems considered in a rather simple and accurate manner.

Return to Mercury: a global perspective on MESSENGER's first Mercury flyby.

PubMed

Solomon, Sean C; McNutt, Ralph L; Watters, Thomas R; Lawrence, David J; Feldman, William C; Head, James W; Krimigis, Stamatios M; Murchie, Scott L; Phillips, Roger J; Slavin, James A; Zuber, Maria T

2008-07-04

In January 2008, the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft became the first probe to fly past the planet Mercury in 33 years. The encounter revealed that Mercury is a dynamic system; its liquid iron-rich outer core is coupled through a dominantly dipolar magnetic field to the surface, exosphere, and magnetosphere, all of which interact with the solar wind. MESSENGER images confirm that lobate scarps are the dominant tectonic landform and record global contraction associated with cooling of the planet. The history of contraction can be related to the history of volcanism and cratering, and the total contractional strain is at least one-third greater than inferred from Mariner 10 images. On the basis of measurements of thermal neutrons made during the flyby, the average abundance of iron in Mercury's surface material is less than 6% by weight.

Analytical screening of low emissions, high performance duct burners for supersonic cruise aircraft engines

NASA Technical Reports Server (NTRS)

Lohmann, R. A.; Riecke, G. T.

1977-01-01

An analytical screening study was conducted to identify duct burner concepts capable of providing low emissions and high performance in advanced supersonic engines. Duct burner configurations ranging from current augmenter technology to advanced concepts such as premix-prevaporized burners were defined. Aerothermal and mechanical design studies provided the basis for screening these configurations using the criteria of emissions, performance, engine compatibility, cost, weight and relative risk. Technology levels derived from recently defined experimental low emissions main burners are required to achieve both low emissions and high performance goals. A configuration based on the Vorbix (Vortex burning and mixing) combustor concept was analytically determined to meet the performance goals and is consistent with the fan duct envelope of a variable cycle engine. The duct burner configuration has a moderate risk level compatible with the schedule of anticipated experimental programs.

Real-time estimation of horizontal gaze angle by saccade integration using in-ear electrooculography

PubMed Central

2018-01-01

The manuscript proposes and evaluates a real-time algorithm for estimating eye gaze angle based solely on single-channel electrooculography (EOG), which can be obtained directly from the ear canal using conductive ear moulds. In contrast to conventional high-pass filtering, we used an algorithm that calculates absolute eye gaze angle via statistical analysis of detected saccades. The estimated eye positions of the new algorithm were still noisy. However, the performance in terms of Pearson product-moment correlation coefficients was significantly better than the conventional approach in some instances. The results suggest that in-ear EOG signals captured with conductive ear moulds could serve as a basis for light-weight and portable horizontal eye gaze angle estimation suitable for a broad range of applications. For instance, for hearing aids to steer the directivity of microphones in the direction of the user’s eye gaze. PMID:29304120

Vitamin C and reducing sugars in the world collection of Capsicum baccatum L. genotypes.

PubMed

Perla, Venu; Nimmakayala, Padma; Nadimi, Marjan; Alaparthi, Suresh; Hankins, Gerald R; Ebert, Andreas W; Reddy, Umesh K

2016-07-01

This study aimed to analyze 123 genotypes of Capsicum baccatum L. originating from 22 countries, at two stages of fruit development, for vitamin C content and its relationship with reducing sugars in fruit pericarp. Among the parametric population, vitamin C and reducing sugar concentrations ranged between 2.54 to 50.44 and 41-700mgg(-1) DW of pericarp, respectively. Overall, 14 genotypes accumulated 50-500% of the RDA of vitamin C in each 2g of fruit pericarp on a dry weight basis. Compared with ripened fruits, matured (unripened) fruits contained higher vitamin C and lower reducing sugars. About 44% variation in the vitamin C content could be ascribed to levels of reducing sugars. For the first time, this study provides comprehensive data on vitamin C in the world collection of C. baccatum genotypes that could serve as a key resource for food research in future. Published by Elsevier Ltd.

Vitamin C and reducing sugars in the world collection of Capsicum baccatum L. genotypes

PubMed Central

Perla, Venu; Nadimi, Marjan; Alaparthi, Suresh; Hankins, Gerald R.; Ebert, Andreas W.; Reddy, Umesh K.

2016-01-01

This study aimed to analyze 123 genotypes of Capsicum baccatum L. originating from 22 countries, at two stages of fruit development, for vitamin C content and its relationship with reducing sugars in fruit pericarp. Among the parametric population, vitamin C and reducing sugar concentrations ranged between 2.54 to 50.44 and 41–700 mg g−1 DW of pericarp, respectively. Overall, 14 genotypes accumulated 50–500% of the RDA of vitamin C in each 2 g of fruit pericarp on a dry weight basis. Compared with ripened fruits, matured (unripened) fruits contained higher vitamin C and lower reducing sugars. About 44% variation in the vitamin C content could be ascribed to levels of reducing sugars. For the first time, this study provides comprehensive data on vitamin C in the world collection of C. baccatum genotypes that could serve as a key resource for food research in future. PMID:26920284

Genetic variation of jointed goatgrass (Aegilops cylindrica Host.) from Iran using RAPD-PCR and SDS-PAGE of seed proteins.

PubMed

Farkhari, M; Naghavi, M R; Pyghambari, S A; Sabokdast

2007-09-01

Genetic variation of 28 populations of jointed goatgrass (Aegilops cylindrica Host.), collected from different parts of Iran, were evaluated using both RAPD-PCR and SDS-PAGE of seed proteins. The diversity within and between populations for the three-band High Molecular Weight (HMW) subunits of glutenin pattern were extremely low. Out of 15 screened primers of RAPD, 14 primers generated 133 reproducible fragments which among them 92 fragments were polymorphic (69%). Genetic similarity calculated from the RAPD data ranged from 0.64 to 0.98. A dendrogram was prepared on the basis of a similarity matrix using the UPGMA algorithm and separated the 28 populations into two groups. Confusion can happen between populations with the same origin as well as between populations of very diverse geographical origins. Our results show that compare to seed storage protein, RAPD is suitable for genetic diversity assessment in Ae. cylindrica populations.

Real-time estimation of horizontal gaze angle by saccade integration using in-ear electrooculography.

PubMed

Hládek, Ľuboš; Porr, Bernd; Brimijoin, W Owen

2018-01-01

The manuscript proposes and evaluates a real-time algorithm for estimating eye gaze angle based solely on single-channel electrooculography (EOG), which can be obtained directly from the ear canal using conductive ear moulds. In contrast to conventional high-pass filtering, we used an algorithm that calculates absolute eye gaze angle via statistical analysis of detected saccades. The estimated eye positions of the new algorithm were still noisy. However, the performance in terms of Pearson product-moment correlation coefficients was significantly better than the conventional approach in some instances. The results suggest that in-ear EOG signals captured with conductive ear moulds could serve as a basis for light-weight and portable horizontal eye gaze angle estimation suitable for a broad range of applications. For instance, for hearing aids to steer the directivity of microphones in the direction of the user's eye gaze.

Characterization of brush borders purified in iso-osmotic medium and microvillar membranes subfractionated from mouse small intestine.

PubMed Central

Fujita, M; Ohta, H; Uezato, T

1981-01-01

Brush borders free of nuclei were isolated by repeated homogenization and centrifugation in iso-osmotic medium. They showed typical morphology under electron microscopy. The mean recovery and enrichment of alkaline phosphatase activity in the brush-border fraction were 50% and 17.5-fold respectively. gamma-Glutamyl transpeptidase showed a close parallelism with alkaline phosphatase and sucrase in subcellular distribution. Microvillar membranes were purified from isolated brush borders; they showed a further enrichment for alkaline phosphatase and were composed of homogeneous vesicles. Both brush-border and microvillar-membrane preparations were analysed for contamination by basolateral and endoplasmic-reticular membranes. Sodium dodecyl sulphate/polyacrylamide-gel electrophoresis of the microvillar-membrane preparation in six different systems revealed approx. 40 components in the mol.wt. range 15 000-232 000. They were grouped into seven major classes on the basis of molecular weight and electrophoretic patterns. Images PLATE 1 PLATE 2 PMID:7317008

Sweetness prediction of natural compounds.

PubMed

Chéron, Jean-Baptiste; Casciuc, Iuri; Golebiowski, Jérôme; Antonczak, Serge; Fiorucci, Sébastien

2017-04-15

Based on the most exhaustive database of sweeteners with known sweetness values, a new quantitative structure-activity relationship model for sweetness prediction has been set up. Analysis of the physico-chemical properties of sweeteners in the database indicates that the structure of most potent sweeteners combines a hydrophobic scaffold functionalized by a limited number of hydrogen bond sites (less than 4 hydrogen bond donors and 10 acceptors), with a moderate molecular weight ranging from 350 to 450g·mol -1 . Prediction of sweetness, bitterness and toxicity properties of the largest database of natural compounds have been performed. In silico screening reveals that the majority of the predicted natural intense sweeteners comprise saponin or stevioside scaffolds. The model highlights that their sweetness potency is comparable to known natural sweeteners. The identified compounds provide a rational basis to initiate the design and chemosensory analysis of new low-calorie sweeteners. Copyright © 2016 Elsevier Ltd. All rights reserved.

Total and inorganic arsenic in freshwater fish and prawn in Thailand.

PubMed

Saipan, Piyawat; Ruangwises, Suthep; Tengjaroenkul, Bundit; Ruangwises, Nongluck

2012-10-01

Total and inorganic arsenic levels were determined in 120 samples of eight freshwater animal species collected from five distribution centers in the central region of Thailand between January and March 2011. Eight species with the highest annual catch, consisting of seven fish species and one prawn species, were analyzed. Concentrations of inorganic arsenic (on a wet weight basis) ranged from 0.010 μg/g in giant prawn (Macrobrachium rosenbergii) to 0.230 μg/g in striped snakehead (Channa striata). Climbing perch (Anabas testudineus) exhibited the highest mean concentrations of total arsenic (0.459 ± 0.137 μg/g), inorganic arsenic (0.121 ± 0.044 μg/g), and percentage of inorganic arsenic (26.2%). Inorganic arsenic levels found in freshwater animals in this study were much lower than the Thai regulatory standard of 2 μg/g.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Valery, N.

The calorific values of the fuels being studied were compared. Petrol is the most efficient, followed by methane in the form of LGN, then methanol and liquid hydrogen. Hydrogen is attractive only on a weight basis, but the storage problems are serious for its liquefied state. Liquid methane requires the same costly storage equipment as hydrogen, making it prohibitive for road vehicles. Methanol is a clean burning fuel and manufacturing processes are being developed. Tests are being sponsored by the Office of Coal Research and the American Gas Association and large-scale commercial plants could be capable of being onstream bymore » 1978. Synthetic crude oil has been manufactured in Sasol, South Africa since 1955. The technique is based on the Fischer-Tropsch process for synthesizing oil from coal, not only making synthetic petrol from coal but also the full range of products normally derived from crude oil. (MCW)« less

High tocopherol and triacylglycerol contents in Pinus pinea L. seeds.

PubMed

Nasri, Nizar; Tlili, Nizar; Ben Ammar, Kamel; Khaldi, Abdelhamid; Fady, Bruno; Triki, Saida

2009-01-01

Oleaginous seeds are among the functional foods most recognized for their tocopherols and triacylglycerols because of their role in lipid metabolism. In this paper, the tocopherol and triacylglycerol contents in seeds of several Pinus pinea L. populations around the Mediterranean Basin were investigated. Lipids were extracted from fully ripen seeds with petroleum ether. The tocopherol (alpha-tocopherol, gamma-tocopherol, and delta-tocopherol) contents were, respectively, 15.34+/-3.75 ppm, 1,681.75+/-404.03 ppm and 41.87+/-9.79 ppm. Lipids (mainly triacylglycerols) in P. pinea seeds averaged 48% on a dry weight basis. Triacylglycerols with an equivalent carbon number of 44 (32.27%) and of 46 (30.91%) were dominant. The major triacylglycerol was LLO (24.06%). Tocopherols and triacylglycerols were present at remarkably high levels, thus making P. pinea oil a valuable source of antioxidants and unsaturated fatty acids with varying levels across the geographical range of P. pinea.

Particle size analysis of sediments, soils and related particulate materials for forensic purposes using laser granulometry.

PubMed

Pye, Kenneth; Blott, Simon J

2004-08-11

Particle size is a fundamental property of any sediment, soil or dust deposit which can provide important clues to nature and provenance. For forensic work, the particle size distribution of sometimes very small samples requires precise determination using a rapid and reliable method with a high resolution. The Coulter trade mark LS230 laser granulometer offers rapid and accurate sizing of particles in the range 0.04-2000 microm for a variety of sample types, including soils, unconsolidated sediments, dusts, powders and other particulate materials. Reliable results are possible for sample weights of just 50 mg. Discrimination between samples is performed on the basis of the shape of the particle size curves and statistical measures of the size distributions. In routine forensic work laser granulometry data can rarely be used in isolation and should be considered in combination with results from other techniques to reach an overall conclusion.

Influence of the Structure of a Solid-Fuel Mixture on the Thermal Efficiency of the Combustion Chamber of an Engine System

NASA Astrophysics Data System (ADS)

Futko, S. I.; Koznacheev, I. A.; Ermolaeva, E. M.

2014-11-01

On the basis of thermodynamic calculations, the features of the combustion of a solid-fuel mixture based on the glycidyl azide polymer were investigated, the thermal cycle of the combustion chamber of a model engine system was analyzed, and the efficiency of this chamber was determined for a wide range of pressures in it and different ratios between the components of the combustible mixture. It was established that, when the pressure in the combustion chamber of an engine system increases, two maxima arise successively on the dependence of the thermal efficiency of the chamber on the weight fractions of the components of the combustible mixture and that the first maximum shifts to the side of smaller concentrations of the glycidyl azide polymer with increase in the pressure in the chamber; the position of the second maximum is independent of this pressure, coincides with the minimum on the dependence of the rate of combustion of the mixture, and corresponds to the point of its structural phase transition at which the mole fractions of the carbon and oxygen atoms in the mixture are equal. The results obtained were interpreted on the basis of the Le-Chatelier principle.

A parametric study of motor starting for a 2- to 10-kilowatt Brayton power system

NASA Technical Reports Server (NTRS)

Cantoni, D. A.

1971-01-01

A study of the motor starting of a Brayton cycle power system was conducted to provide estimates of system sensitivity to several controllable parameters. These sensitivity estimates were used as a basis for selection of an optimum motor-start scheme to be implemented on the 2- to 10-kilowatt Brayton power system designed and presently under test. The studies were conducted with an analog simulation of the Brayton power system and covered a range of frequencies from 400 Hz (33 percent design) to 1200 Hz (design), voltage-to-frequency ratios of 0.050 (50 percent design) to 0.100 (design), turbine-inlet temperatures of 800 K (1440 R, 70 percent design) to 1140 K (2060 deg R, design), and prestart pressure levels of 14.5 psia to 29.0 psia. These studies have shown the effect of selected system variables on motor starting. The final selection of motor-start variables can therefore be made on the basis of motor-start inverter complexity, battery size and weight, desired steady-state pressure level after startup, and other operational limitations. In general, the study showed the time required for motor starting to be inversely proportional to motor frequency, voltage, turbine-inlet temperature, and pressure level. An increase in any of these parameters decreases startup time.

Two-body potential model based on cosine series expansion for ionic materials

DOE PAGES

Oda, Takuji; Weber, William J.; Tanigawa, Hisashi

2015-09-23

There is a method to construct a two-body potential model for ionic materials with a Fourier series basis and we examine it. For this method, the coefficients of cosine basis functions are uniquely determined by solving simultaneous linear equations to minimize the sum of weighted mean square errors in energy, force and stress, where first-principles calculation results are used as the reference data. As a validation test of the method, potential models for magnesium oxide are constructed. The mean square errors appropriately converge with respect to the truncation of the cosine series. This result mathematically indicates that the constructed potentialmore » model is sufficiently close to the one that is achieved with the non-truncated Fourier series and demonstrates that this potential virtually provides minimum error from the reference data within the two-body representation. The constructed potential models work appropriately in both molecular statics and dynamics simulations, especially if a two-step correction to revise errors expected in the reference data is performed, and the models clearly outperform two existing Buckingham potential models that were tested. Moreover, the good agreement over a broad range of energies and forces with first-principles calculations should enable the prediction of materials behavior away from equilibrium conditions, such as a system under irradiation.« less

Occurrence and partition ratios of radiocesium in an urban river during dry and wet weather after the 2011 nuclear accident in Fukushima.

PubMed

Murakami, Michio; Shibayama, Nao; Sueki, Keisuke; Mouri, Goro; O, Haechong; Nomura, Mihiro; Koibuchi, Yukio; Oki, Taikan

2016-04-01

After the 2011 nuclear accident in Fukushima, radiocesium was released from the Fukushima Dai-ichi Nuclear Power Plant and contaminated waters in urban areas near Tokyo. By intensive field monitoring during 3 years, this study investigated the temporal trends and the occurrence of radiocesium during dry and wet weather, and analyzed the variations in radiocesium during rainfall events and factors controlling them. Concentrations of particulate radiocesium decreased rapidly from May 2012 to March 2013 and reached an equilibrium in 2014. Concentrations of particulate (137)Cs during wet weather were almost double those during dry weather in the same period. In contrast to the small variations in (137)Cs concentrations in the particulate phase on a suspended solids (SS) weight basis during events, those in the dissolved phase on a liquid-volume basis fluctuated greatly, resulting in variations in the partition coefficient (apparent Kd). The apparent Kd of (137)Cs during wet weather ranged from 30,000 to 150,000 L kg(-1) and showed a significant negative correlation with SS concentrations during wet weather. Specific surface area in solids contributed to the variations in apparent Kd. Copyright © 2016 Elsevier Ltd. All rights reserved.

Field measurements on the exchange of carbonyl sulfide between lichens and the atmosphere

NASA Astrophysics Data System (ADS)

Kuhn, U.; Wolf, A.; Gries, C.; , T. H. Nash, III; Kesselmeier, J.

The exchange of carbonyl sulfide (COS) between lichens and the atmosphere was investigated under natural field conditions. Using dynamic enclosures flushed with ambient air, we demonstrate that lichens act as a major sink for atmospheric COS in the investigated ecosystem. Diel courses of the exchange are shown in an open oak woodland ecosystem at a rural site in central California. The measurements were distributed over a variety of weather conditions during the dry (May/June) and the wet season (Nov/Dec). The physiological parameters (CO 2 exchange and thallus hydration status) plus environmental variables (temperature, irradiance, atmospheric humidity and ambient COS mixing ratio) were recorded. Lichens are capable of continuous uptake of COS in the dark as well as in the light, depending mainly on their moisture status. Results indicate that the uptake is additionally dependent on temperature and COS ambient mixing ratio. Enzyme inactivation by high temperature denaturation demonstrate that the uptake is under physiological control. Light and thus photosynthetic activity do not have a direct influence on the uptake rate. Under these field investigations the COS uptake on a dry weight basis ranged between 0.015 and 0.071 pmol g-1 s-1. On a thallus surface area basis the sink strength is comparable to the uptake by higher vegetation.

Basalt fiber and nanoclay compositions, articles incorporating the same, and methods of insulating a rocket motor with the same

NASA Technical Reports Server (NTRS)

Gajiwala, Himansu M. (Inventor)

2010-01-01

An insulation composition that comprises at least one nitrile butadiene rubber, basalt fibers, and nanoclay is disclosed. Further disclosed is an insulation composition that comprises polybenzimidazole fibers, basalt fibers, and nanoclay. The basalt fibers may be present in the insulation compositions in a range of from approximately 1% by weight to approximately 6% by weight of the total weight of the insulation composition. The nanoclay may be present in the insulation compositions in a range of from approximately 5% by weight to approximately 10% by weight of the total weight of the insulation composition. Rocket motors including the insulation compositions and methods of insulating a rocket motor are also disclosed.

Rocket motors incorporating basalt fiber and nanoclay compositions and methods of insulating a rocket motor with the same

NASA Technical Reports Server (NTRS)

Gajiwala, Himansu M. (Inventor)

2011-01-01

An insulation composition that comprises at least one nitrile butadiene rubber, basalt fibers, and nanoclay is disclosed. Further disclosed is an insulation composition that comprises polybenzimidazole fibers, basalt fibers, and nanoclay. The basalt fibers may be present in the insulation compositions in a range of from approximately 1% by weight to approximately 6% by weight of the total weight of the insulation composition. The nanoclay may be present in the insulation compositions in a range of from approximately 5% by weight to approximately 10% by weight of the total weight of the insulation composition. Rocket motors including the insulation compositions and methods of insulating a rocket motor are also disclosed.

7 CFR 59.303 - Mandatory reporting of lamb carcasses and boxed lamb.

Code of Federal Regulations, 2010 CFR

2010-01-01

... grade, if applicable; (vi) The product state of refrigeration; (vii) The weight range of the cut; and... Specifications (IMPS), when applicable; (iv) The product state of refrigeration; (v) The weight range of the cut...

7 CFR 59.303 - Mandatory reporting of lamb carcasses and boxed lamb.

Code of Federal Regulations, 2013 CFR

2013-01-01

... grade, if applicable; (vi) The product state of refrigeration; (vii) The weight range of the cut; and... Specifications (IMPS), when applicable; (iv) The product state of refrigeration; (v) The weight range of the cut...

Predicting the ideal serum creatinine of kidney transplant recipients by a simple formula based on the balance between metabolic demands of recipients and renal mass supply from donors.

PubMed

Oh, C K; Lee, B M; Kim, H; Kim, S I; Kim, Y S

2008-09-01

Serum creatinine (Scr) is the most frequently used test to estimate graft function after kidney transplantation. Our previous study demonstrated that the independent predictors of recipient posttransplantation Scr included the ratio of graft weight to recipient body weight, the ratio of graft weight to recipient body surface area (BSA), and the ratio of graft weight to recipient body mass index (BMI). A prospective analysis about the impact of the balance between metabolic demands and renal supply on posttransplantation Scr of recipients was previously reported. We plotted the scatter graph using the X-axis as the independent predictors of Scr by linear regression and the Y-axis as the recipient Scr. To generate the predictive formula of Scr, we calculated a fit of the line of plotted cases using a linear regression method with 2 regression lines for prediction of the upper and lower 95% confidence intervals. Each line was converted into a predictive formula: Scr = -0.0033* (Graft weight(g)/Recipient BSA(m2))+1.75. Under 95% confidence, the Scr ranges from -0.0033* (Graft weight(g)/Recipient BSA(m2))+1.07 to -0.0033* (Graft weight(g)/Recipient BSA (m2))+2.44. Scr = -0.1049* (Graft weight(g)/Recipient body weight(kg))+1.72, which ranges from -0.1049* (Graft weight(g)/Recipient body weight(kg))+1.06 to -0.1049* (Graft weight(g)/Recipient body weight(kg))+2.37. Scr = -0.0158* (Graft weight(g)/Recipient BMI(kg/m2))+1.56, which ranges from -0.0158* (Graft weight(g)/Recipient BMI(kg/m2))+0.75 to -0.0158* (Graft weight(g)/Recipient BMI(kg/m2))+2.26. Prediction of posttransplantation Scr may be achieved by measuring graft weight as well as recipient weight and height. When recipient Scr is significantly higher than that predicted by the formula, a clinician should suspect an underlying graft injury.

40 CFR 60.702 - Standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... first. Each owner or operator shall either: (a) Reduce emissions of TOC (less methane and ethane) by 98 weight-percent, or to a TOC (less methane and ethane) concentration of 20 ppmv, on a dry basis corrected...

48 CFR 2415.304 - Evaluation factors.

Code of Federal Regulations, 2011 CFR

2011-10-01

... assigned a numerical weight (except for pass-fail factors) which shall appear in the RFP. When using LPTA, each evaluation factor is applied on a “pass-fail” basis; numerical scores are not assigned. “Pass-fail...

48 CFR 2415.304 - Evaluation factors.

Code of Federal Regulations, 2012 CFR

2012-10-01

... assigned a numerical weight (except for pass-fail factors) which shall appear in the RFP. When using LPTA, each evaluation factor is applied on a “pass-fail” basis; numerical scores are not assigned. “Pass-fail...

21 CFR 172.841 - Polydextrose.

Code of Federal Regulations, 2013 CFR

2013-04-01

... consists either of approximately 89 percent D-glucose, 10 percent sorbitol, and 1 percent citric acid or of approximately 90 percent D-glucose, 10 percent sorbitol, and 0.1 percent phosphoric acid, on a weight basis. (2...

21 CFR 172.841 - Polydextrose.

Code of Federal Regulations, 2011 CFR

2011-04-01

... consists either of approximately 89 percent D-glucose, 10 percent sorbitol, and 1 percent citric acid or of approximately 90 percent D-glucose, 10 percent sorbitol, and 0.1 percent phosphoric acid, on a weight basis. (2...

21 CFR 172.841 - Polydextrose.

Code of Federal Regulations, 2012 CFR

2012-04-01

... consists either of approximately 89 percent D-glucose, 10 percent sorbitol, and 1 percent citric acid or of approximately 90 percent D-glucose, 10 percent sorbitol, and 0.1 percent phosphoric acid, on a weight basis. (2...

21 CFR 172.841 - Polydextrose.

Code of Federal Regulations, 2010 CFR

2010-04-01

... consists either of approximately 89 percent D-glucose, 10 percent sorbitol, and 1 percent citric acid or of approximately 90 percent D-glucose, 10 percent sorbitol, and 0.1 percent phosphoric acid, on a weight basis. (2...

Implications of the method of capital cost payment on the weighted average cost of capital.

PubMed Central

Boles, K E

1986-01-01

The author develops a theoretical and mathematical model, based on published financial management literature, to describe the cost of capital structure for health care delivery entities. This model is then used to generate the implications of changing the capital cost reimbursement mechanism from a cost basis to a prospective basis. The implications are that the cost of capital is increased substantially, the use of debt must be restricted, interest rates for borrowed funds will increase, and, initially, firms utilizing debt efficiently under cost-basis reimbursement will be restricted to the generation of funds from equity only under a prospective system. PMID:3525468

Assessment of Ganga river ecosystem at Haridwar, Uttarakhand, India with reference to water quality indices

NASA Astrophysics Data System (ADS)

Bhutiani, R.; Khanna, D. R.; Kulkarni, Dipali Bhaskar; Ruhela, Mukesh

2016-06-01

The river Ganges is regarded as one of the most holy and sacred rivers of the world from time immemorial. The evaluation of river water quality is a critical element in the assessment of water resources. The quality/potability of water that is consumed defines the base line of protection against many diseases and infections. The present study aimed to calculate Water Quality Index (WQI) by the analysis of sixteen physico-chemical parameters on the basis of River Ganga index of Ved Prakash, weighted arithmetic index and WQI by National sanitation foundation (NSF) to assess the suitability of water for drinking, irrigation purposes and other human uses. These three water quality indices have been used to assess variation in the quality of the River Ganga at monitored locations over an 11-year period. Application of three different indexes to assess the water quality over a period of 11 years shows minor variations in water quality. Index values as per River Ganga Index by Ved Prakash et al. from 2000 to 2010 ranged between medium to good, Index values as per NSF Index for years 2000-2010 indicate good water quality, while Index values as per the weighted arithmetic index method for the study period indicate poor water quality.

Alkylphenols, polycyclic aromatic hydrocarbons, and organochlorines in sediment from Lake Shihwa, Korea: Instrumental and bioanalytical characterization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khim, J.S.; Villeneuve, D.L.; Kannan, K.

1999-11-01

Lake Shihwa is an artificial lake, located on the west coast of Korea, that has experienced environmental deterioration since 1994, when it was formed by construction of a sea dike. This study used instrumental analysis and in vitro bioassays to characterize organic contaminants in sediment collected from 11 stations on Lake Shihwa. Alkylphenol (AP) concentrations in Lake Shihwa sediment ranged from 20.2 to 1,820 ng/g nonylphenol and from 4.69 to 50.5 ng/g octylphenol, on a dry weight basis. Maximum concentrations of polycyclic aromatic hydrocarbons (PAHs), organochlorine pesticides, and polychlorinated biphenyls (PCBs) were 30.8, 2.26, and 12.3 ng/g (dry weight), respectively.more » Significant estrogenic activity was associated with fractions containing APs. Mass-balance analysis suggested that reported concentrations of APs account for less than 20% of the estrogenic activity observed. No significant dioxin like activity was associated with fractions containing classic aryl hydrocarbon receptor agonists, such as PCBs, but the mid-polarity fractions containing PAHs and most polar fractions yielded significant dioxin like activity. Overall, most of the in vitro bioassay responses appear to have been caused by unidentified and/or undetectable compounds associated with Lake Shihwa sediment.« less

Tier 3 multidisciplinary medical weight management improves outcome of Roux-en-Y gastric bypass surgery.

PubMed

Patel, P; Hartland, A; Hollis, A; Ali, R; Elshaw, A; Jain, S; Khan, A; Mirza, S

2015-04-01

In 2013 the Department of Health specified eligibility for bariatric surgery funded by the National Health Service. This included a mandatory specification that patients first complete a Tier 3 medical weight management programme. The clinical effectiveness of this recommendation has not been evaluated previously. Our bariatric centre has provided a Tier 3 programme six months prior to bariatric surgery since 2009. The aim of our retrospective study was to compare weight loss in two cohorts: Roux-en-Y gastric bypass only (RYGB only cohort) versus Tier 3 weight management followed by RYGB (Tier 3 cohort). A total of 110 patients were selected for the study: 66 in the RYGB only cohort and 44 in the Tier 3 cohort. Patients in both cohorts were matched for age, sex, preoperative body mass index and pre-existing co-morbidities. The principal variable was therefore whether they undertook the weight management programme prior to RYGB. Patients from both cohorts were followed up at 6 and 12 months to assess weight loss. The mean weight loss at 6 months for the Tier 3 cohort was 31% (range: 18-69%, standard deviation [SD]: 0.10 percentage points) compared with 23% (range: 4-93%, SD: 0.12 percentage points) for the RYGB only cohort (p=0.0002). The mean weight loss at 12 months for the Tier 3 cohort was 34% (range: 17-51%, SD: 0.09 percentage points) compared with 27% (range: 14-48%, SD: 0.87 percentage points) in the RYGB only cohort (p=0.0037). Our study revealed that in our matched cohorts, patients receiving Tier 3 specialist medical weight management input prior to RYGB lost significantly more weight at 6 and 12 months than RYGB only patients. This confirms the clinical efficacy of such a weight management programme prior to gastric bypass surgery and supports its inclusion in eligibility criteria for bariatric surgery.

Frequency weighting for vibration-induced white finger compatible with exposure-response models.

PubMed

Brammer, Anthony J; Pitts, Paul M

2012-01-01

An analysis has been performed to derive a frequency weighting for the development of vibration-induced white finger (VWF). It employs a model to compare health risks for pairs of population groups that are selected to have similar health outcomes from operating power tools or machines with markedly different acceleration spectra (rock drills, chain saws, pavement breakers and motorcycles). The model defines the Relative Risk, RR(f(trial)), which is constructed from the ratio of daily exposures and includes a trial frequency weighting that is applied to the acceleration spectra. The trial frequency weighting consists of a frequency-independent primary frequency range, and subordinate frequency ranges in which the response to vibration diminishes, with cut-off frequencies that are changed to influence the magnitude of RR(f(trial)). The frequency weighting so derived when RR(f(trial)) = 1 is similar to those obtained by other methods (W(hf), W(hT)). It consists of a frequency independent range from about 25 Hz to 500 Hz (-3 dB frequencies), with an amplitude cut-off rate of 12 dB/octave below 25 Hz and above 500 Hz. The range is compatible with studies of vasoconstriction in persons with VWF. The results provide further evidence that the ISO frequency weighting may be inappropriate for assessing the risk of developing VWF.

Efficacy and safety of transoral outlet reduction via endoscopic suturing in patients with weight regain after a surgical Roux-en-Y gastric bypass.

PubMed

Espinet Coll, Eduardo; Nebreda Durán, Javier; López-Nava Breviere, Gontrand; Galvao Neto, Manoel; Gómez Valero, José Antonio; Bacchiddu, Silvia; Vila Lolo, Carmen; Díaz Galán, Patricia; Bautista-Castaño, Inmaculada; Juan-Creix Comamala, Antonio

2018-05-09

many patients that undergo bariatric surgery (Roux-en-Y gastric bypass [RYGB]) may regain some of their weight lost over time. A transoral outlet reduction (TORe) with endoscopic suture could be a valid alternative in these patients. this was a retrospective initial series of 13 consecutive patients with weight regain after RYGB and a dilated gastro-jejunal anastomosis (> 15 mm). TORe was performed using an endoscopic transmural suture device (OverStitch-Apollo®), which was used to reduce the anastomosis aperture and also to treat the gastric pouch. The initial data of feasibility, safety and weight loss are described with a limited follow-up of six months. there was a mean maximum weight loss of 37.69 kg after RYGB and a subsequent average regain of 21.62 kg. The mean anastomosis diameter was 36 mm (range 20-45) which was reduced to 9 mm (range 5-12) (75% reduction), with an average of 2.5 sutures. The mean pouch size was 7.2 cm (range 2-10), which decreased to 4.7 cm (range 4-5) (34.72% reduction), with an average of 2.7 sutures. The mean weight loss six months after TORe was 12.29 kg, a weight loss of 56.85% of the weight regained after RYGB. No complications related to the procedure were recorded. endoscopic suture reduction of the dilated gastro-jejunal anastomosis and the gastric pouch seems a feasible and safe option in our limited initial experience. With a multidisciplinary approach and a short term follow-up, this seems to be a minimally invasive and effective option to control weight regain after RYGB.

Untrained consumer assessment of the eating quality of beef: 1. A single composite score can predict beef quality grades.

PubMed

Bonny, S P F; Hocquette, J-F; Pethick, D W; Legrand, I; Wierzbicki, J; Allen, P; Farmer, L J; Polkinghorne, R J; Gardner, G E

2017-08-01

Quantifying consumer responses to beef across a broad range of demographics, nationalities and cooking methods is vitally important for any system evaluating beef eating quality. On the basis of previous work, it was expected that consumer scores would be highly accurate in determining quality grades for beef, thereby providing evidence that such a technique could be used to form the basis of and eating quality grading system for beef. Following the Australian MSA (Meat Standards Australia) testing protocols, over 19 000 consumers from Northern Ireland, Poland, Ireland, France and Australia tasted cooked beef samples, then allocated them to a quality grade; unsatisfactory, good-every-day, better-than-every-day and premium. The consumers also scored beef samples for tenderness, juiciness, flavour-liking and overall-liking. The beef was sourced from all countries involved in the study and cooked by four different cooking methods and to three different degrees of doneness, with each experimental group in the study consisting of a single cooking doneness within a cooking method for each country. For each experimental group, and for the data set as a whole, a linear discriminant function was calculated, using the four sensory scores which were used to predict the quality grade. This process was repeated using two conglomerate scores which are derived from weighting and combining the consumer sensory scores for tenderness, juiciness, flavour-liking and overall-liking, the original meat quality 4 score (oMQ4) (0.4, 0.1, 0.2, 0.3) and current meat quality 4 score (cMQ4) (0.3, 0.1, 0.3, 0.3). From the results of these analyses, the optimal weightings of the sensory scores to generate an 'ideal meat quality 4 score (MQ4)' for each country were calculated, and the MQ4 values that reflected the boundaries between the four quality grades were determined. The oMQ4 weightings were far more accurate in categorising European meat samples than the cMQ4 weightings, highlighting that tenderness is more important than flavour to the consumer when determining quality. The accuracy of the discriminant analysis to predict the consumer scored quality grades was similar across all consumer groups, 68%, and similar to previously reported values. These results demonstrate that this technique, as used in the MSA system, could be used to predict consumer assessment of beef eating quality and therefore to underpin a commercial eating quality guarantee for all European consumers.

Accuracy of Self-Reported Weight among Adolescent and Young Adults Following Bariatric Surgery

PubMed Central

Jenkins, Todd M.; Boyce, Tawny W.; Buncher, C. Ralph; Zeller, Meg H.; Courcoulas, Anita P.; Evans, Mary; Inge, Thomas H.

2017-01-01

Purpose This study evaluates accuracy of self-reported weight in adolescent bariatric surgery patients. Materials and Methods During follow-up visits, participants self-reported weight and had weight measured. Differences between self-reported and measured weights were analyzed from 60 participants. Results Participants were 70% (n=42) female, 72% (n=43) white, mean age of 20.8 years and median body mass index of 36.6 kg/m2. At an average 3.5 years following surgery, females underestimated weight (0.5kg, range: −18.7 to 5.6kg), while males overestimated (1.1kg, range: −7.8 to 15.2kg). Most (80%, n=48) reported within 5kg of measured weight. The majority of adolescents who previously underwent bariatric surgery reported reasonably accurate weights, but direction of misreporting varied by gender. Conclusion Self-reported weights could be utilized when measured values are unavailable without markedly biasing the interpretation of outcomes. PMID:28012151

Weight Measurements and Standards for Soldiers, Phase 2

DTIC Science & Technology

2012-10-01

Louisiana Army National Guard (LANG) called Healthy Eating, Activity, and Lifestyle Training Headquarters (H.E.A.L.T.H.) (1). This program was...H.E.A.L.T.H. program aims to empower Soldiers in healthy and safe lifestyle change to sustain healthy weight and performance on a year-round basis...recently made mobile and is now able to be accessed and utilized via Smartphone devices, e.g. Droid, iphone, Blackberry. The launch of the program on

Physical Activity, Body Size, Intentional Weight Loss and Breast Cancer Risk: Fellowship

DTIC Science & Technology

2000-10-01

unconditional logistic regression and were adjusted for physical activity at other time periods, age, body mass index , smoking status, postmenopausal hormone use ...This variable was used to evaluate tests for trend within the ’any vigorous activity’ group. Body mass index (BMI) was computed using recent weight... used to evaluate the relation of diabetes to the risk of endometrial cancer on the basis of body mass index (BMI). Cases (n = 723) were identified

Kinetic balance and variational bounds failure in the solution of the Dirac equation in a finite Gaussian basis set

NASA Technical Reports Server (NTRS)

Dyall, Kenneth G.; Faegri, Knut, Jr.

1990-01-01

The paper investigates bounds failure in calculations using Gaussian basis sets for the solution of the one-electron Dirac equation for the 2p1/2 state of Hg(79+). It is shown that bounds failure indicates inadequacies in the basis set, both in terms of the exponent range and the number of functions. It is also shown that overrepresentation of the small component space may lead to unphysical results. It is concluded that it is important to use matched large and small component basis sets with an adequate size and exponent range.

[Nutritional Status of Japanese Women of Childbearing Age and the Ideal Weight Range for Pregnancy].

PubMed

Nomura, Kyoko; Kodama, Hiroko; Kido, Michiko

2018-01-01

According to the recent 2015 Nutrition Survey, the prevalence of being underweight (Body Mass Index, BMI <18.5 kg/m 2 ) among women in their 20s is 22.3%. Women of childbearing age tend to have a lower intake of protein and their total energy intake is lower than the requirements established by the 2015 Dietary Reference Intakes for Japanese. There is a growing body of evidence showing that underweight women tend to bear small babies and that these babies have an increased risk of diabetes or cancer in their adulthood. In order to prevent Japanese women from bearing small babies, the literature has suggested that women of childbearing age should be encouraged to remain at a normal weight before pregnancy. For optimal weight gain during pregnancy, existing guidelines recommend different ranges of weight gain based on prepregnancy BMI. Owing to the absence of official GWG recommendations in Asian countries, including China and Taiwan, the US Institute of Medicine (IOM) guidelines are generally followed. However, Asian women are smaller and experience lower weight gains; therefore, excessive weight gain may lead to harmful events including macrosomia, preterm birth, preeclampsia, gestational diabetes, pregnancy-induced hypertension, and short- and long-term postpartum weight retention. Thus, an accurate GWG range should be determined for Asian women. We introduce one epidemiological study in which the optimal weight gain range was investigated by analyzing receiver-operating characteristic curves together with potential research ideas in this field with the aim of encouraging young researchers to solve this public health problem affecting mothers and children.

Light weight phosphate cements

DOEpatents

Wagh, Arun S.; Natarajan, Ramkumar,; Kahn, David

2010-03-09

A sealant having a specific gravity in the range of from about 0.7 to about 1.6 for heavy oil and/or coal bed methane fields is disclosed. The sealant has a binder including an oxide or hydroxide of Al or of Fe and a phosphoric acid solution. The binder may have MgO or an oxide of Fe and/or an acid phosphate. The binder is present from about 20 to about 50% by weight of the sealant with a lightweight additive present in the range of from about 1 to about 10% by weight of said sealant, a filler, and water sufficient to provide chemically bound water present in the range of from about 9 to about 36% by weight of the sealant when set. A porous ceramic is also disclosed.

Formulation/cure technology for ultrahigh molecular weight silphenylene-siloxane polymers

NASA Technical Reports Server (NTRS)

Hundley, N. H.; Patterson, W. J.

1985-01-01

Molecular weights above one million were achieved for methylvinylsilphenylene-siloxane terpolymers using a two-stage polymerization technique which was successfully scaled up to 200 grams. The resulting polymer was vulcanized by two different formulations and compared to an identically formulated commercial methylvinyl silicone on the basis of ultimate strength, Young's modulus, percent elongation at failure, and tear strength. Relative thermal/oxidative stabilities of the elastomers were assessed by gradient and isothermal thermogravimetric analyses performed in both air and nitrogen. The experimental elastomer exhibited enhanced thermal/oxidative stability and possed equivalent or superior mechanical properties. The effect of variations in prepolymer molecular weight on mechanical properties was also investigated.

Design and evaluation of active cooling systems for Mach 6 cruise vehicle wings

NASA Technical Reports Server (NTRS)

Mcconarty, W. A.; Anthony, F. M.

1971-01-01

Active cooling systems, which included transpiration, film, and convective cooling concepts, are examined. Coolants included hydrogen, helium, air, and water. Heat shields, radiation barriers, and thermal insulation are considered to reduce heat flow to the cooling systems. Wing sweep angles are varied from 0 deg to 75 deg and wing leading edge radii of 0.05 inch and 2.0 inches are examined. Structural temperatures are varied to allow comparison of aluminum alloy, titanium alloy, and superalloy structural materials. Cooled wing concepts are compared among themselves, and with the uncooled concept on the basis of structural weight, cooling system weight, and coolant weight.

Safety of gardening on lead- and arsenic-contaminated urban brownfields.

PubMed

Defoe, Phillip P; Hettiarachchi, Ganga M; Benedict, Christopher; Martin, Sabine

2014-11-01

Elevated levels of lead (Pb) and arsenic (As) are not uncommon for urban soils. Test plots were established at urban gardens in Tacoma and Seattle, WA. The Tacoma site was contaminated with Pb (51-312 mg kg) and As (39-146 mg kg), and the Seattle site had high Pb soil concentrations ranging from 506 to 2022 mg kg and As concentrations of <20 mg kg. The efficacy of biosolids mix and compost amendment in reducing Pb and As concentrations in three vegetables (carrots, lettuce, and tomatoes) and the bioaccessibility of soil Pb and As were evaluated. Food-chain transfer of Pb and As were evaluated by measuring plant Pb and As concentrations after kitchen-style washing, a laboratory cleaning procedure, or peeling. The experimental design was a randomized complete block with a split-plot arrangement. Tacoma site treatments included a Class A biosolids mix (TAGRO) with dolomite, and soil at the Seattle site was amended with Cedar-Grove compost (CGC) plus dolomite. TAGRO amendment diluted soil Pb by 10 to 23% and As by 12 to 25% at the Tacoma site, and CGC + dolomite resulted in 20 to 50% dilution in soil Pb at the Seattle site. Both amendments reduced Pb concentrations in vegetables by 50 to 71%, and As reductions ranged from 46 to 80%. At the Tacoma site, Pb concentrations (dry weight basis) in carrots, lettuce, and tomatoes ranged from 8.89 to 25.0, from 0.37 to 3.83, and from 0.54 to 1.24 mg kg, respectively. Plant As concentrations were below 703 μg kg (dry weight) for the vegetables and followed the order lettuce > carrot > tomato. Food-chain transfer of Pb and As in vegetables grown in contaminated urban soils were reduced by laboratory cleaning. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Evaluation of outcome and prognostic factors for dogs living greater than one year after diagnosis of osteosarcoma: 90 cases (1997-2008).

PubMed

Culp, William T N; Olea-Popelka, Francisco; Sefton, Jennifer; Aldridge, Charles F; Withrow, Stephen J; Lafferty, Mary H; Rebhun, Robert B; Kent, Michael S; Ehrhart, Nicole

2014-11-15

To evaluate clinical characteristics, outcome, and prognostic variables in a cohort of dogs surviving > 1 year after an initial diagnosis of osteosarcoma. Retrospective case series. 90 client-owned dogs. Medical records for an 11-year period from 1997 through 2008 were reviewed, and patients with appendicular osteosarcoma that lived > 1 year after initial histopathologic diagnosis were studied. Variables including signalment, weight, serum alkaline phosphatase activity, tumor location, surgery, and adjuvant therapies were recorded. Median survival times were calculated by means of a Kaplan-Meier survival function. Univariate analysis was conducted to compare the survival function for categorical variables, and the Cox proportional hazard model was used to evaluate the likelihood of death > 1 year after diagnosis on the basis of the selected risk factors. 90 dogs met the inclusion criteria; clinical laboratory information was not available in all cases. Median age was 8.2 years (range, 2.7 to 13.3 years), and median weight was 38 kg (83.6 lb; range, 21 to 80 kg [46.2 to 176 lb]). Serum alkaline phosphatase activity was high in 29 of 60 (48%) dogs. The most common tumor location was the distal portion of the radius (54/90 [60%]). Eighty-nine of 90 (99%) dogs underwent surgery, and 78 (87%) received chemotherapy. Overall, 49 of 90 (54%) dogs developed metastatic disease. The median survival time beyond 1 year was 243 days (range, 1 to 1,899 days). Dogs that developed a surgical-site infection after limb-sparing surgery had a significantly improved prognosis > 1 year after osteosarcoma diagnosis, compared with dogs that did not develop infections. Results of the present study indicated that dogs with an initial diagnosis of osteosarcoma that lived > 1 year had a median survival time beyond the initial year of approximately 8 months. As reported previously, the development of a surgical-site infection in dogs undergoing a limb-sparing surgery significantly affected prognosis and warrants further study.

19 CFR 351.414 - Comparison of normal value with export price (constructed export price).

Code of Federal Regulations, 2010 CFR

2010-04-01

... export price). (a) Introduction. The Secretary normally will average prices used as the basis for normal... calculate weighted averages for such shorter period as the Secretary deems appropriate. (e) Application of...

NOTE: A positive contrast, tri-modality tissue marker for breast tumour localization

NASA Astrophysics Data System (ADS)

Li, Yangmei; Xiong Wang, Jian; Holloway, Claire; Plewes, Donald B.

2007-02-01

A new interstitial breast localization marker is proposed which exhibits positive contrast in T1-weighted MRI, ultrasound and x-ray mammography. Unlike previous markers which provide MRI contrast on the basis of a susceptibility-induced signal void, this marker provides a clear positive contrast without any loss of signal or spatial distortion. The marker is composed of 400 µm diameter copper microspheres suspended in a Gd-DTPA-doped gel matrix. Optimal contrast in T1-weighted spoiled gradient recalled MRI was found to occur with the addition of 10 mM Gd-DTPA. Ultrasound contrast was generated on the basis of scattering from the copper microspheres. X-ray contrast was provided by the high x-ray attenuation properties of the copper microspheres. The study demonstrates potential suitability of the marker for use as a breast localization marker based on ex vivo studies of chicken breast.

Three Tier Unified Process Model for Requirement Negotiations and Stakeholder Collaborations

NASA Astrophysics Data System (ADS)

Niazi, Muhammad Ashraf Khan; Abbas, Muhammad; Shahzad, Muhammad

2012-11-01

This research paper is focused towards carrying out a pragmatic qualitative analysis of various models and approaches of requirements negotiations (a sub process of requirements management plan which is an output of scope managementís collect requirements process) and studies stakeholder collaborations methodologies (i.e. from within communication management knowledge area). Experiential analysis encompass two tiers; first tier refers to the weighted scoring model while second tier focuses on development of SWOT matrices on the basis of findings of weighted scoring model for selecting an appropriate requirements negotiation model. Finally the results are simulated with the help of statistical pie charts. On the basis of simulated results of prevalent models and approaches of negotiations, a unified approach for requirements negotiations and stakeholder collaborations is proposed where the collaboration methodologies are embeded into selected requirements negotiation model as internal parameters of the proposed process alongside some external required parameters like MBTI, opportunity analysis etc.

An adaptive trajectory tracking control of four rotor hover vehicle using extended normalized radial basis function network

NASA Astrophysics Data System (ADS)

ul Amin, Rooh; Aijun, Li; Khan, Muhammad Umer; Shamshirband, Shahaboddin; Kamsin, Amirrudin

2017-01-01

In this paper, an adaptive trajectory tracking controller based on extended normalized radial basis function network (ENRBFN) is proposed for 3-degree-of-freedom four rotor hover vehicle subjected to external disturbance i.e. wind turbulence. Mathematical model of four rotor hover system is developed using equations of motions and a new computational intelligence based technique ENRBFN is introduced to approximate the unmodeled dynamics of the hover vehicle. The adaptive controller based on the Lyapunov stability approach is designed to achieve tracking of the desired attitude angles of four rotor hover vehicle in the presence of wind turbulence. The adaptive weight update based on the Levenberg-Marquardt algorithm is used to avoid weight drift in case the system is exposed to external disturbances. The closed-loop system stability is also analyzed using Lyapunov stability theory. Simulations and experimental results are included to validate the effectiveness of the proposed control scheme.

Chinese life cycle impact assessment factors.

PubMed

Yang, J X; Nielsen, P H

2001-04-01

The methodological basis and procedures for determination of Chinese normalization references and weighting factors according to the EDIP-method is described. According to Chinese industrial development intensity and population density, China was divided into three regions and the normalization references for each region were calculated on the basis of an inventory of all of the region's environmental emissions in 1990. The normalization reference was determined as the total environmental impact potential for the area in question in 1990 (EP(j)90) divided by the population. The weighting factor was determined as the normalization reference (ER(j)90) divided by society's target contribution in the year 2000 based on Chinese political reduction plans, ER(j)T2000. This paper presents and discuss results obtained for eight different environmental impact categories relevant for China: global warming, stratospheric ozone depletion, acidification, nutrient enrichment, photochemical ozone formation and generation of bulk waste, hazardous waste and slag and ashes.

Lattice-free prediction of three-dimensional structure of programmed DNA assemblies

PubMed Central

Pan, Keyao; Kim, Do-Nyun; Zhang, Fei; Adendorff, Matthew R.; Yan, Hao; Bathe, Mark

2014-01-01

DNA can be programmed to self-assemble into high molecular weight 3D assemblies with precise nanometer-scale structural features. Although numerous sequence design strategies exist to realize these assemblies in solution, there is currently no computational framework to predict their 3D structures on the basis of programmed underlying multi-way junction topologies constrained by DNA duplexes. Here, we introduce such an approach and apply it to assemblies designed using the canonical immobile four-way junction. The procedure is used to predict the 3D structure of high molecular weight planar and spherical ring-like origami objects, a tile-based sheet-like ribbon, and a 3D crystalline tensegrity motif, in quantitative agreement with experiments. Our framework provides a new approach to predict programmed nucleic acid 3D structure on the basis of prescribed secondary structure motifs, with possible application to the design of such assemblies for use in biomolecular and materials science. PMID:25470497

Comparison of range of commercial or primary care led weight reduction programmes with minimal intervention control for weight loss in obesity: lighten Up randomised controlled trial.

PubMed

Jolly, Kate; Lewis, Amanda; Beach, Jane; Denley, John; Adab, Peymane; Deeks, Jonathan J; Daley, Amanda; Aveyard, Paul

2011-11-03

To assess the effectiveness of a range of weight management programmes in terms of weight loss. Eight arm randomised controlled trial. Primary care trust in Birmingham, England. 740 obese or overweight men and women with a comorbid disorder identified from general practice records. Weight loss programmes of 12 weeks' duration: Weight Watchers; Slimming World; Rosemary Conley; group based, dietetics led programme; general practice one to one counselling; pharmacy led one to one counselling; choice of any of the six programmes. The comparator group was provided with 12 vouchers enabling free entrance to a local leisure (fitness) centre. The primary outcome was weight loss at programme end (12 weeks). Secondary outcomes were weight loss at one year, self reported physical activity, and percentage weight loss at programme end and one year. Follow-up data were available for 658 (88.9%) participants at programme end and 522 (70.5%) at one year. All programmes achieved significant weight loss from baseline to programme end (range 1.37 kg (general practice) to 4.43 kg (Weight Watchers)), and all except general practice and pharmacy provision resulted in significant weight loss at one year. At one year, only the Weight Watchers group had significantly greater weight loss than did the comparator group (2.5 (95% confidence interval 0.8 to 4.2) kg greater loss,). The commercial programmes achieved significantly greater weight loss than did the primary care programmes at programme end (mean difference 2.3 (1.3 to 3.4) kg). The primary care programmes were the most costly to provide. Participants allocated to the choice arm did not have better outcomes than those randomly allocated to a programme. Commercially provided weight management services are more effective and cheaper than primary care based services led by specially trained staff, which are ineffective. Trial registration Current Controlled Trials ISRCTN25072883.

Effect of fuel density and heating value on ram-jet airplane range

NASA Technical Reports Server (NTRS)

Henneberry, Hugh M

1952-01-01

An analytical investigation of the effects of fuel density and heating value on the cruising range of a ram-jet airplane was made. Results indicate that with present-day knowledge of chemical fuels, neither very high nor very low fuel densities have any advantages for long-range flight. Of the fuels investigated, the borohydrides and metallic boron have the greatest range potential. Aluminum and aluminum hydrocarbon slurries were inferior to pure hydrocarbon fuel and boron-hydrocarbon slurries were superior on a range basis. It was concluded that the practical difficulties associated with the use of liquid hydrogen fuel cannot be justified on a range basis.

[Knee-related Pain Problems during Pregnancy Correlate with an Increase in Body Weight. Results of a Prospective Study].

PubMed

Spahn, G; Lesser, A; Hofmann, G O; Schiele, R

2015-10-01

This study aimed to evaluate the incidence of knee pain or the intensification of knee-related problems during pregnancy. We hypothesised that the occurrence of knee problems correlates with an increase in body weight during pregnancy. A total of 326 women (30(th)-40(th) week of pregnancy) were involved in this study. At onset of the pregnancy, the patients were 29.4 [95% CI 28.8-29.9] years of age. We asked all patients retrospectively about their anthropometric data at the beginning of pregnancy. All patients provided information about former knee problems, knee problems occurring after onset of pregnancy or any increase in these problems. These knee patients were re-evaluated 6 weeks after childbirth. At follow-up, the patients were asked about their knee problems and about their body weight. At the beginning of pregnancy, the mean body weight was 68.0 kg (95% CI 64.4-69.6; range 41-117). The mean BMI of all patients was 24.5 kg/m² (25% CI 23.9-25.0; range 17.0-26.0). The absolute body weight increased by 13.8 kg (95% CI 13.2-1.5; range 3-38). A total of 24 patients (7.4%) reported new knee problems during pregnancy. 2 patients reported an increase in knee-related problems during pregnancy (0.6%). The incidence of knee-related problems (new cases and increase of problems n=26) was 26/326 or 7.6/100 pregnancies. In patients without knee problems, the pregnancy-related increase in the BMI (ΔBMI) was 4.8 kg/m² (95% CI 4.6-5.1, range 1.1-14.1). In cases with incident knee problems, the ΔBMI was 5.9 kg/m² (95% CI 4.9-6.9, range 2.1-11.8). The increase in body weight (Δbody weight) in patients without knee problems was 13.5 kg (95% CI 12.9-14.2, range 3-38). Patients with incident knee pain experienced a Δbody weight of 16.8 kg (95% CI 13.9-19.4, range 6-35). The differences in ΔBMI and Δbody weight were significant (p=0.009). A Δbody weight >20 kg was a significant risk factor for pregnancy-related knee pain significant risk factor pregnancy related pain. A total of 23 incident cases (92%) underwent a follow-up interview 6 weeks after parturition. At this time, a total of 6 patients (26.1%) had not experienced further knee problems, whereas persistent knee problems were reported in the remaining patients (73.9%). Patients without any knee complaints [body weight 72.5 kg (CI 95% 60.9-83.9)] tended to have a lower body weight at follow-up than patients with persistent knee pain [85.5 kg (CI 95% 71.8-99.1), p=0.162]. There is a body weight-associated increase in the incidence of functional knee pain in pregnant women. In about one-third of the cases, knee problems persist after pregnancy and are associated with a residual increase in body weight. Thus, we conclude that body weight is a potential risk factor for functional knee pain. © Georg Thieme Verlag KG Stuttgart · New York.

A systematic review of medicinal plants used for weight loss in Brazil: Is there potential for obesity treatment?

PubMed

Cercato, Luana M; White, Pollyanna A S; Nampo, Fernando K; Santos, Márcio R V; Camargo, Enilton A

2015-12-24

Obesity is a pandemic disease and its prevalence is still increasing. Moreover, it has important costs to public health. In Brazil, many plants are used for weight loss by overweight or obese people, but there is a lack of scientific basis for this practice. Many ethnobotanical studies aiming to characterize this usage have been published, but they are still limited by the region considered and the diversity of the popular knowledge. The present study was undertaken to systematically review the ethnobotanical surveys regarding the species utilized to reduce body weight in overweight or obese people in Brazil. Ethnobotanical surveys related to this usage and performed in Brazilian regions were systematically found in MEDLINE, LILACS and Scopus. Thirty-three studies were included in this review. Fifty species were popularly utilized to lose weight. The most cited species were Baccharis trimera (Less.) DC, Annona muricata L. and Hancornia speciosa Gomes. Camellia sinensis (L.) Kuntze and Hibiscus sabdariffa L. were also cited and are supported by either animal or human investigations that indicate some beneficial activity against obesity. However, for the majority of species cited in the included studies, there is no scientific basis that assures the biological effects of this usage. Many studies have demonstrated important effects of these plants on glycemia, serum lipid levels or body weight control in non-obese conditions, which is not sufficient to recommend the use of these plants to reduce body weight in overweight or obese people. Although many plants are popularly used to reduce weight in overweight or obese people in Brazil, there is little scientific evidence corroborating its usage. Based on the ethnobotanical data presented, this review indicates the plants that should be considered for scientifically controlled studies devoted to investigating their effects on obesity. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Electronics Controls Assessment for the PATRIOT Air Conditioner System. Revision

DTIC Science & Technology

1986-04-28

electronic controls in Army Air Conditioner Systems. This assessment used criteria which included: cost (initial and life cycle), efficiency, weight ...each of the twelve selected controllers as to cost and size Iqualifications was accomplished b) assigning reasonable weight factors according to the...following table:I COST SIZE5 WEIGHT FACTOR (Per Unit Price Range) (Volumetric Range) 1 Under $1000 Under 700 in 3 3 $1000 to $1500 700-1000 in 3 5 $1501

Genetic parameter estimates among scale activity score and farrowing disposition with reproductive traits in swine.

PubMed

Schneider, J F; Rempel, L A; Rohrer, G A; Brown-Brandl, T M

2011-11-01

The primary objective of this study was to determine if certain behavior traits were genetically correlated with reproduction. If 1 or both of the behavior traits were found to be correlated, a secondary objective was to determine if the behavior traits could be useful in selecting for more productive females. A scale activity score taken at 5 mo of age and a farrowing disposition score taken at farrowing were selected as the behavioral traits. Scale activity score ranged from 1 to 5 and farrowing disposition ranged from 1 to 3. Reproductive traits included age at puberty, number born alive, number born dead, litter birth weight, average piglet birth weight, number weaned, litter weaning weight, average weaning weight, wean-to-estrus interval, ovulation rate including gilts, and postweaning ovulation rate. Genetic correlations between scale activity score and reproduction ranged from -0.79 to 0.61. Three of the correlations, number born alive (P < 0.01), average piglet birth weight (P < 0.001), and wean-to-estrus interval (P = 0.014), were statistically significant but included both favorable and antagonistic correlations. In contrast, all but 1 of the farrowing disposition correlations was favorable and ranged from -0.66 to 0.67. Although only the correlation with litter birth weight was significant (P = 0.018), the consistent favorable direction of all farrowing disposition correlations, except average weaning weight, shows a potential for inclusion of farrowing disposition into a selection program.

Population biology of bluegills, Lepomis macrochirus, in lotic habitats on the irrigated San Joaquin Valley floor

USGS Publications Warehouse

Saiki, M.K.; Schmitt, C.J.

1985-01-01

Rapid expansion of irrigated agriculture in the western United States has prompted concerns for aquatic resources. Although the impacts of irrigation activities on quality and quantity of river water are well documented (e.g., high turbidity from soil erosion, eutrophication from nutrient runoff, pesticide contamination, reduced dis- charge), their effects on fish populations are still poorly understood. We studied the food, growth, and relative weight (a measure of body condition) of bluegills, Lepo- mis macrochirus, in relation to environmental factors in reaches of the San Joaquin and Merced rivers that have been affected to varying degrees by irrigation return flows. Fry of bluegills ate mostly cladocerans and copepods; fingerlings and larger fish ate immature aquatic insects, terrestrial insects, amphipods, and mollusks. Bluegill stomachs were fuller and contained a higher diversity of forage taxa in habitats with low turbidity and conductivity, weak buffering capacity, and low nutrient levels; bluegills also ate a more diverse diet where the potential forage supply (benthic macroinvertebrates) was most diverse. Bluegills attained mean total lengths of about 42 mm at age I, 86 mm at age 11, 116 mm at age III, 153 mm at age IV, and 166 mm at age V. Mean relative weight ranged from 96-111. Growth rate and relative weight were not significantly correlated with environmental or dietary variables. On the basis of our study, we concluded that environmental degradation from irrigation activities affected the diet of bluegills primarily by modifying the food supply, but growth rate and body condition were not affected.

Characterization of the Low-Molecular-Weight Human Plasma Peptidome.

PubMed

Greening, David W; Simpson, Richard J

2017-01-01

The human plasma proteome represents an important secreted sub-proteome. Proteomic analysis of blood plasma with mass spectrometry is a challenging task. The high complexity and wide dynamic range of proteins as well as the presence of several proteins at very high concentrations complicate the profiling of the human plasma proteome. The peptidome (or low-molecular-weight fraction, LMF) of the human plasma proteome is an invaluable source of biological information, especially in the context of identifying plasma-based markers of disease. Peptides are generated by active synthesis and proteolytic processing, often yielding proteolytic fragments that mediate a variety of physiological and pathological functions. As such, degradomic studies, investigating cleavage products via peptidomics and top-down proteomics in particular, have warranted significant research interest. However, due to their molecular weight, abundance, and solubility, issues with identifying specific cleavage sites and coverage of peptide fragments remain challenging. Peptidomics is currently focused toward comprehensively studying peptides cleaved from precursor proteins by endogenous proteases. This protocol outlines a standardized rapid and reproducible procedure for peptidomic profiling of human plasma using centrifugal ultrafiltration and mass spectrometry. Ultrafiltration is a convective process that uses anisotropic semipermeable membranes to separate macromolecular species on the basis of size. We have optimized centrifugal ultrafiltration (cellulose triacetate membrane) for plasma fractionation with respect to buffer and solvent composition, centrifugal force, duration, and temperature to facilitate recovery >95% and enrichment of the human plasma peptidome. This method serves as a comprehensive and facile process to enrich and identify a key, underrepresented sub-proteome of human blood plasma.

Profiles, sources, and transport of polycyclic aromatic hydrocarbons in soils affected by electronic waste recycling in Longtang, south China.

PubMed

Huang, De-Yin; Liu, Chuan-Ping; Li, Fang-Bai; Liu, Tong-Xu; Liu, Cheng-Shuai; Tao, Liang; Wang, Yan

2014-06-01

We studied the profiles, possible sources, and transport of polycyclic aromatic hydrocarbons (PAHs) in soils from the Longtang area, which is an electronic waste (e-waste) recycling center in south China. The sum of 16 PAH concentrations ranged from 25 to 4,300 ng/g (dry weight basis) in the following order: pond sediment sites (77 ng/g), vegetable fields (129 ng/g), paddy fields (180 ng/g), wastelands (258 ng/g), dismantling sites (678 ng/g), and former open burning sites (2,340 ng/g). Naphthalene, phenanthrene, fluoranthene, pyrene, chrysene, and benzo[b]fluoranthene were the dominant PAHs and accounted for approximately 75 % of the total PAHs. The similar composition characteristics of PAHs and the significant correlations among individual, low molecular weight, high molecular weight, and total PAHs were found in all six sampling site types, thus indicating that PAHs originated from similar sources. The results of both isomeric ratios and principal component analyses confirmed that PAHs were mainly derived from the incomplete combustion of e-waste. The former open burning sites and dismantling sites were the main sources of PAHs. Soil samples that were taken closer to the point sources had high PAH concentrations. PAHs are transported via different soil profiles, including those in agricultural fields, and have been detected not only in 0- to 40-cm-deep soil but also in 40 cm to 80 cm-deep soil. PAH concentrations in soils in Longtang have been strongly affected by primitive e-waste recycling, particularly by former open burning activities.

Dietary management, husbandry, and body weights of African elephants (Loxodonta africana) during successful pregnancies at Disney's Animal Kingdom.

PubMed

Sullivan, Kathleen; Kerr, Katherine; Wanty, Rachel; Amaral, Bryan; Olea-Popelka, Francisco; Valdes, Eduardo

2016-11-01

Successful pregnancy in African elephants is influenced by biological and environmental factors. For managed elephants many of these factors are set directly or indirectly by their human care takers, including nutrition and husbandry. While African elephants often struggle to conceive and produce healthy offspring under human care, Disney's Animal Kingdom (DAK) has effectively managed six gestations to fruition in three cows. Despite differences between mothers in terms of BW and growth curves during gravidity, each pregnancy successfully resulted in the birth of a healthy calf. Body weight (BW) gain during pregnancy ranged from 245 to 558 kg. Obesity in elephants is associated with increased occurrence of dystocia and mortality of the fetus and mother, hence understanding normal weight gains is an integral concept. Diet (dry matter basis) included high levels of fiber throughout pregnancies (60-70% neutral detergent fiber), vitamin E supplementation (116-214 mg/kg diet of alpha-tocopherol), as well as low levels of starch (2.5-5.1%) and crude fat (1.9-2.4%). Caretaker directed exercise during pregnancy at DAK served to prevent ventral edema, and increase muscle tone to prepare cows for parturition. Demonstrating techniques for effective care of pregnant females, as well as normal growth curves and fluctuations under ex situ conditions are necessary for future positive outcomes. Ensuring reproductive success through proper husbandry and nutrition are a key to long-term conservation of elephants. Zoo Biol. 35:574-578, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Predicting the Maximum Dynamic Strength in Bench Press: The High Precision of the Bar Velocity Approach.

PubMed

Loturco, Irineu; Kobal, Ronaldo; Moraes, José E; Kitamura, Katia; Cal Abad, César C; Pereira, Lucas A; Nakamura, Fábio Y

2017-04-01

Loturco, I, Kobal, R, Moraes, JE, Kitamura, K, Cal Abad, CC, Pereira, LA, and Nakamura, FY. Predicting the maximum dynamic strength in bench press: the high precision of the bar velocity approach. J Strength Cond Res 31(4): 1127-1131, 2017-The aim of this study was to determine the force-velocity relationship and test the possibility of determining the 1 repetition maximum (1RM) in "free weight" and Smith machine bench presses. Thirty-six male top-level athletes from 3 different sports were submitted to a standardized 1RM bench press assessment (free weight or Smith machine, in randomized order), following standard procedures encompassing lifts performed at 40-100% of 1RM. The mean propulsive velocity (MPV) was measured in all attempts. A linear regression was performed to establish the relationships between bar velocities and 1RM percentages. The actual and predicted 1RM for each exercise were compared using a paired t-test. Although the Smith machine 1RM was higher (10% difference) than the free weight 1RM, in both cases the actual and predicted values did not differ. In addition, the linear relationship between MPV and percentage of 1RM (coefficient of determination ≥95%) allow determination of training intensity based on the bar velocity. The linear relationships between the MPVs and the relative percentages of 1RM throughout the entire range of loads enable coaches to use the MPV to accurately monitor their athletes on a daily basis and accurately determine their actual 1RM without the need to perform standard maximum dynamic strength assessments.

Comparison of ArcGIS and SAS Geostatistical Analyst to Estimate Population-Weighted Monthly Temperature for US Counties.

PubMed

Xiaopeng, Q I; Liang, Wei; Barker, Laurie; Lekiachvili, Akaki; Xingyou, Zhang

Temperature changes are known to have significant impacts on human health. Accurate estimates of population-weighted average monthly air temperature for US counties are needed to evaluate temperature's association with health behaviours and disease, which are sampled or reported at the county level and measured on a monthly-or 30-day-basis. Most reported temperature estimates were calculated using ArcGIS, relatively few used SAS. We compared the performance of geostatistical models to estimate population-weighted average temperature in each month for counties in 48 states using ArcGIS v9.3 and SAS v 9.2 on a CITGO platform. Monthly average temperature for Jan-Dec 2007 and elevation from 5435 weather stations were used to estimate the temperature at county population centroids. County estimates were produced with elevation as a covariate. Performance of models was assessed by comparing adjusted R 2 , mean squared error, root mean squared error, and processing time. Prediction accuracy for split validation was above 90% for 11 months in ArcGIS and all 12 months in SAS. Cokriging in SAS achieved higher prediction accuracy and lower estimation bias as compared to cokriging in ArcGIS. County-level estimates produced by both packages were positively correlated (adjusted R 2 range=0.95 to 0.99); accuracy and precision improved with elevation as a covariate. Both methods from ArcGIS and SAS are reliable for U.S. county-level temperature estimates; However, ArcGIS's merits in spatial data pre-processing and processing time may be important considerations for software selection, especially for multi-year or multi-state projects.

Optimal weighted combinatorial forecasting model of QT dispersion of ECGs in Chinese adults.

PubMed

Wen, Zhang; Miao, Ge; Xinlei, Liu; Minyi, Cen

2016-07-01

This study aims to provide a scientific basis for unifying the reference value standard of QT dispersion of ECGs in Chinese adults. Three predictive models including regression model, principal component model, and artificial neural network model are combined to establish the optimal weighted combination model. The optimal weighted combination model and single model are verified and compared. Optimal weighted combinatorial model can reduce predicting risk of single model and improve the predicting precision. The reference value of geographical distribution of Chinese adults' QT dispersion was precisely made by using kriging methods. When geographical factors of a particular area are obtained, the reference value of QT dispersion of Chinese adults in this area can be estimated by using optimal weighted combinatorial model and reference value of the QT dispersion of Chinese adults anywhere in China can be obtained by using geographical distribution figure as well.

Gadolinium-enhanced cardiovascular magnetic resonance: administered dose in relationship to United States Food and Drug Administration (FDA) guidelines.

PubMed

Nacif, Marcelo S; Arai, Andrew E; Lima, Joao A C; Bluemke, David A

2012-02-29

Myocardial late gadolinium enhancement was originally validated using higher than label-recommended doses of gadolinium chelate. The objective of this study was to evaluate available evidence for various gadolinium dosing regimens used for CMR. The relationship of gadolinium dose warnings (due to nephrogenic systemic fibrosis) announced in 2008 to gadolinium dosing regimens was also examined. We conducted a meta-analysis of peer reviewed publications from January, 2004 to December, 2010. Major subject search headings (MeSh) terms from the National Library of Medicine's PubMed were: contrast media, gadolinium, heart, magnetic resonance imaging; searches were limited to human studies with abstracts published in English. Case reports, review articles, editorials, MRA related papers and all reports that did not indicate gadolinium type or weight-based dose were excluded. For all included references, full text was available to determine the total administered gadolinium dose on a per kg basis. Average and median dose values were weighted by the number of subjects in each study. 399 publications were identified in PubMed; 233 studies matched the inclusion criteria, encompassing 19,934 patients with mean age 54.2 ± 11.4 (range 9.3 to 76 years). 34 trials were related to perfusion testing and 199 to myocardial late gadolinium enhancement. In 2004, the weighted-median and weighted-mean contrast dose were 0.15 and 0.16 ± 0.06 mmol/kg, respectively. Median contrast doses for 2005-2010 were: 0.2 mmol/kg for all years, respectively. Mean contrast doses for the years 2005-2010 were: 0.19 ± 0.03, 0.18 ± 0.04, 0.18 ± 0.10, 0.18 ± 0.03, 0.18 ± 0.04 and 0.18 ± 0.04 mmol/kg, respectively (p for trend, NS). Gadopentetate dimeglumine was the most frequent gadolinium type [114 (48.9%) studies]. No change in mean gadolinium dose was present before, versus after the Food and Drug Administration (FDA) black box warning (p > 0.05). Three multi-center dose ranging trials have been published for cardiac MRI applications. CMR studies in the peer-reviewed published literature routinely use higher gadolinium doses than regulatory agencies indicated in the package leaflet. Clinical trials should be supported to determine the appropriate doses of gadolinium for CMR studies.

Genetic and phenotypic parameters for carcass and meat quality traits in commercial crossbred pigs.

PubMed

Miar, Y; Plastow, G S; Moore, S S; Manafiazar, G; Charagu, P; Kemp, R A; Van Haandel, B; Huisman, A E; Zhang, C Y; McKay, R M; Bruce, H L; Wang, Z

2014-07-01

Pork quality and carcass characteristics are now being integrated into swine breeding objectives because of their economic value. Understanding the genetic basis for these traits is necessary for this to be accomplished. The objective of this study was to estimate phenotypic and genetic parameters for carcass and meat quality traits in 2 Canadian swine populations. Data from a genomic selection study aimed at improving meat quality with a mating system involving hybrid Landrace × Large White and Duroc pigs were used to estimate heritabilities and phenotypic and genetic correlations among them. Data on 2,100 commercial crossbred pigs for meat quality and carcass traits were recorded with pedigrees compromising 9,439 animals over 15 generations. Significant fixed effects (company, sex, and slaughter batch), covariates (cold carcass weight and slaughter age), and random additive and common litter effects were fitted in the models. A series of pairwise bivariate analyses were implemented in ASReml to estimate phenotypic and genetic parameters. Heritability estimates (±SE) for carcass traits were moderate to high and ranged from 0.22 ± 0.08 for longissimus dorsi muscle area to 0.63 ± 0.04 for trimmed ham weight, except for firmness, which was low. Heritability estimates (±SE) for meat quality traits varied from 0.10 ± 0.04 to 0.39 ± 0.06 for the Minolta b* of ham quadriceps femoris muscle and shear force, respectively. Generally, most of the genetic correlations were significant (P < 0.05) and ranged from low (0.18 ± 0.07) to high (-0.97 ± 0.35). There were high negative genetic correlations between drip loss with pH and shear force and a positive correlation with cooking loss. Genetic correlations between carcass weight (both hot and cold) with carcass marbling were highly positive. It was concluded that selection for increasing primal and subprimal cut weights with better pork quality may be possible. Furthermore, the use of pH is confirmed as an indicator for pork water-holding capacity and cooking loss. The heritabilities of carcass and pork quality traits indicated that they can be improved using traditional breeding methods and genomic selection, respectively. The estimated genetic parameters for carcass and meat quality traits can be incorporated into the breeding programs that emphasize product quality in these Canadian swine populations.

Production traits of artificially and naturally hatched geese in intensive and free-range systems - II: slaughter, carcass and meat quality traits.

PubMed

Boz, M A; Sarıca, M; Yamak, U S

2017-04-01

1. This study investigates the slaughter, carcass and meat quality traits of artificially and naturally hatched geese in intensive and free-range production systems. 2. The study was conducted with 114 naturally hatched and 102 artificially hatched geese. From each replicate of the intensive and free-range systems, one female and one male goose were slaughtered at the ages of 14, 16 and 18 weeks (a total of 32 geese per slaughter week). 3. Artificially hatched geese had higher slaughter weights (5280 vs. 4404 g), carcass weights (3520 vs. 2863), dressing percentages (66.6-65.2% vs. 65.0-63.6%) and carcass part, feather and edible inner organ weights. The ratio of both edible inner organs and abdominal fat was higher in naturally hatched geese. Breast meat L*, a* and pH values and thigh meat dry matter values were higher in artificially hatched geese, whereas thigh meat b* and pH values were higher in naturally hatched geese. 4. Intensively reared geese had higher slaughter weights (4900 vs. 4783 g), carcass weights (3253 vs. 3130 g) and abdominal fat weights (280 vs. 250 g), as well as higher dressing percentages (66.3-64.9% vs. 65.3-63.9%). Breast meat b* and thigh meat L* values were higher in the intensive system, while breast and thigh pH values, dripping loss and cooking loss were higher in the free-range system. Water-holding capacity was higher in the intensive system. 5. In conclusion, artificially hatched, intensively reared geese had the highest slaughter weights; however, both artificially and naturally hatched geese raised in a free-range system reached acceptable slaughter weights and can thus be recommended for use with this type of production system.

The relative effects of entry parameters on thermal protection system weight. [space shuttle orbiters

NASA Technical Reports Server (NTRS)

Hirasaki, P. N.

1971-01-01

Shielding a spacecraft from the severe thermal environment of an atmospheric entry requires a sophisticated thermal protection system (TPS). Thermal computer program models were developed for two such TPS designs proposed for the space shuttle orbiter. The multilayer systems, a reusable surface insulation TPS, and a re-radiative metallic skin TPS, were sized for a cross-section of trajectories in the entry corridor. This analysis indicates the relative influence of the entry parameters on the weight of each TPS concept. The results are summarized graphically. The trajectory variables considered were down-range, cross-range, orbit inclination, entry interface velocity and flight path angle, maximum heating rate level, angle of attack, and ballistic coefficient. Variations in cross-range and flight path angle over the ranges considered had virtually no effect on the required entry TPS weight. The TPS weight was significantly more sensitive to variations in angle of attack than to dispersions in the other trajectory considered.

Size, weight and position: ion mobility spectrometry and imaging MS combined.

PubMed

Kiss, András; Heeren, Ron M A

2011-03-01

Size, weight and position are three of the most important parameters that describe a molecule in a biological system. Ion mobility spectrometry is capable of separating molecules on the basis of their size or shape, whereas imaging mass spectrometry is an effective tool to measure the molecular weight and spatial distribution of molecules. Recent developments in both fields enabled the combination of the two technologies. As a result, ion-mobility-based imaging mass spectrometry is gaining more and more popularity as a (bio-)analytical tool enabling the determination of the size, weight and position of several molecules simultaneously on biological surfaces. This paper reviews the evolution of ion-mobility-based imaging mass spectrometry and provides examples of its application in analytical studies of biological surfaces.

Development of an integrated chemical process system for utilization of complete Paraquat-treated pine trees. Final report, 1 July 1977-31 March 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Neil, D.J.; Bery, M.K.; El-Barbary, I.A.

1979-01-01

In 1973 it was reported that the treatment of southern pine trees with the herbicide Paraquat could induce lightwood formation with very significant increases in the extractable oleoresins and turpentine fractions. The objectives of this project included the characterization of this phenomenon, development of realistic qualitative and quantitative data on the extent of lightwood formation and the recovery of oleoresin and turpentine fractions. The principal objective was to determine if the yields of oleoresinous products and turpentine justified a stand-alone, economic wood extraction process technology, based on the utilization of whole- or complete-Paraquat-treated pine trees. The application of this technologymore » was considered to be appropriate as a sub-system of an integrated chemical process system wherein ethanol, lignin (or hydrocarbon derivatives), and sugars would be manufactured as co-products. Alternately, such extraction technology could be used as a pre-treatment operation prior to Kraft pulping processing. Yield results tended to be variable. Turpentine increases ranged from 2- to 4-fold on a merchantable bole basis with increases at the site of injection as high as 12-fold. The distribution of the turpentine content in Paraquat-treated trees, as well as for extractives content, decreased to normal background levels at about six feet above the wound site. Oleoresin content increases normally ranged from 2 to 3 fold with a maximum total extractables content (or yield) of about 8% on a dry weight basis. Under current conditions, the phenomenon of lightwood formation in mature trees may best be exploited in pulp process plants.« less

Rotational spectroscopy of methylamine up to 2.6 THz

NASA Astrophysics Data System (ADS)

Motiyenko, R. A.; Ilyushin, V. V.; Drouin, B. J.; Yu, S.; Margulès, L.

2014-03-01

Context. Methylamine (CH3NH2) is the simplest primary alkylamine that has been detected in the interstellar medium. The molecule is relatively light, with the 50 K Boltzmann peak appearing near 800 GHz. However, reliable predictions for its rotational spectrum are available only up to 500 GHz. Spectroscopic analyses have been complicated by the two large-amplitude motions: internal rotation of the methyl top and inversion of the amino group. Aims: To provide reliable predictions of the methylamine ground state rotational spectrum above 500 GHz, we studied its rotational spectrum in the frequency range from 500 to 2650 GHz. Methods: The spectra of methylamine were recorded using the spectrometers based on Schottky diode frequency multiplication chains in the Lille laboratory (500-945 GHz) and in JPL (1060-2660 GHz). The analysis of the rotational spectrum of methylamine in the ground vibrational state was performed on the basis of the group-theoretical high barrier tunneling Hamiltonian developed for methylamine by Ohashi and Hougen. Results: In the recorded spectra, we have assigned 1849 new rotational transitions of methylamine. They were fitted together with previously published data, to a Hamiltonian model that uses 76 parameters with an overall weighted rms deviation of 0.87. On the basis of the new spectroscopic results, predictions of transition frequencies in the frequency range up to 3 THz with J ≤ 50 and Ka ≤ 20 are presented. Full Tables 2 and 3 are only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.frftp://130.79.128.5 or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/563/A137

Spatial variability of mercury wet deposition in eastern Ohio: summertime meteorological case study analysis of local source influences

DOE Office of Scientific and Technical Information (OSTI.GOV)

Emily M. White; Gerald J. Keeler; Matthew S. Landis

2009-07-01

Extensive exploration of event precipitation data in the Ohio River Valley indicates that coal combustion emissions play an important role in mercury (Hg) wet deposition. During July-September 2006, an intensive study was undertaken to discern the degree of local source influence. Source-receptor relationships were explored by establishing a set of wet deposition sites in and around Steubenville, Ohio. For the three month period of study, volume-weighted mean Hg concentrations observed at the eight sites ranged from 10.2 to 22.3 ng L{sup -1}, but this range increased drastically on an event basis with a maximum concentration of 89.4 ng L{sup -1}more » and a minimum concentration of 4.1 ng L{sup -1}. A subset of events was explored in depth, and the degree of variability in Hg concentrations between sites was linked to the degree of local source enhancement. Samples collected at sites less than 1 km from coal-fired utility stacks (near-field) exhibited up to 72% enhancement in Hg concentrations over regionally representative samples on an event basis. Air mass transport and precipitating cell histories were traced in order to evaluate relationships between local point sources and receptor sites. It was found that the interaction of several dynamic atmospheric parameters combined to favor local Hg concentration enhancement over the more regional contribution. When significant meteorological factors (wind speed at time of maximum rain rate, wind speed 24 h prior to precipitation, mixing height, and observed ceiling) were explored, it was estimated that during summertime precipitation, 42% of Hg concentration in near-field samples could be attributed to the adjacent coal-fired utility source. 28 refs., 3 figs., 2 tabs.« less

An evolving scientific basis for the prevention and treatment of pediatric obesity

PubMed Central

Katzmarzyk, PT; Barlow, S; Bouchard, C; Catalano, PM; Hsia, DS; Inge, TH; Lovelady, C; Raynor, H; Redman, LM; Staiano, AE; Spruijt-Metz, D; Symonds, ME; Vickers, M; Wilfley, D; Yanovski, JA

2014-01-01

The 2013 Pennington Biomedical Research Center’s Scientific Symposium focused on the treatment and management of pediatric obesity and was designed to (i) review recent scientific advances in the prevention, clinical treatment and management of pediatric obesity, (ii) integrate the latest published and unpublished findings and (iii) explore how these advances can be integrated into clinical and public health approaches. The symposium provided an overview of important new advances in the field, which led to several recommendations for incorporating the scientific evidence into practice. The science presented covered a range of topics related to pediatric obesity, including the role of genetic differences, epigenetic events influenced by in utero development, pre-pregnancy maternal obesity status, maternal nutrition and maternal weight gain on developmental programming of adiposity in offspring. Finally, the relative merits of a range of various behavioral approaches targeted at pediatric obesity were covered, together with the specific roles of pharmacotherapy and bariatric surgery in pediatric populations. In summary, pediatric obesity is a very challenging problem that is unprecedented in evolutionary terms; one which has the capacity to negate many of the health benefits that have contributed to the increased longevity observed in the developed world. PMID:24662696

Transparent and High Refractive Index Thermoplastic Polymer Glasses Using Evaporative Ligand Exchange of Hybrid Particle Fillers.

PubMed

Wang, Zongyu; Lu, Zhao; Mahoney, Clare; Yan, Jiajun; Ferebee, Rachel; Luo, Danli; Matyjaszewski, Krzysztof; Bockstaller, Michael R

2017-03-01

Development of high refractive index glasses on the basis of commodity polymer thermoplastics presents an important requisite to further advancement of technologies ranging from energy efficient lighting to cost efficient photonics. This contribution presents a novel particle dispersion strategy that enables uniform dispersion of zinc oxide (ZnO) particles in a poly(methyl methacrylate) (PMMA) matrix to facilitate hybrid glasses with inorganic content exceeding 25% by weight, optical transparency in excess of 0.8/mm, and a refractive index greater than 1.64 in the visible wavelength range. The method is based on the application of evaporative ligand exchange to synthesize poly(styrene-r-acrylonitrile) (PSAN)-tethered zinc oxide (ZnO) particle fillers. Favorable filler-matrix interactions are shown to enable the synthesis of isomorphous blends with high molecular PMMA that exhibit improved thermomechanical stability compared to that of the pristine PMMA matrix. The concurrent realization of high refractive index and optical transparency in polymer glasses by modification of a thermoplastic commodity polymer could present a viable alternative to expensive specialty polymers in applications where high costs or demands for thermomechanical stability and/or UV resistance prohibit the application of specialty polymer solutions.

Vermicomposting of tannery sludge mixed with cattle dung into valuable manure using earthworm Eisenia fetida (Savigny).

PubMed

Vig, Adarsh Pal; Singh, Jaswinder; Wani, Shahid Hussain; Singh Dhaliwal, Salwinder

2011-09-01

The present study revealed the role of earthworm in converting tannery sludge into a valuable product. Tannery sludge was toxic to earthworm, therefore it was mixed with cattle dung in different proportions viz. 0:100 (T(0)), 10:90 (T(10)), 25:75 (T(25)), 50:50 (T(50)) and 75:25 (T(75)) on dry weight basis. The minimum mortality and highest population buildup of worms was in T(0) mixture. Nitrogen, sodium, phosphorus and pH increased from initial in the range of 7.3-66.6%, 16.90-70.58%, 8.57-44.8% and 2.8-13.65%, respectively. On the other hand potassium, organic carbon and electrical conductivity decreased in the range of 4.34-28.5%, 7.54-22.35% and 32.35-53.12%, respectively. C:N ratio decreased from 20.53% to 47.36% in the final products. Transition metals increased significantly from the initial value and within the permissible limit. The result indicated that vermicomposting with Eisenia fetida is better for changing this sludge into nutrient rich manure in a short period of time. Copyright © 2011 Elsevier Ltd. All rights reserved.

An evolving scientific basis for the prevention and treatment of pediatric obesity.

PubMed

Katzmarzyk, P T; Barlow, S; Bouchard, C; Catalano, P M; Hsia, D S; Inge, T H; Lovelady, C; Raynor, H; Redman, L M; Staiano, A E; Spruijt-Metz, D; Symonds, M E; Vickers, M; Wilfley, D; Yanovski, J A

2014-07-01

The 2013 Pennington Biomedical Research Center's Scientific Symposium focused on the treatment and management of pediatric obesity and was designed to (i) review recent scientific advances in the prevention, clinical treatment and management of pediatric obesity, (ii) integrate the latest published and unpublished findings and (iii) explore how these advances can be integrated into clinical and public health approaches. The symposium provided an overview of important new advances in the field, which led to several recommendations for incorporating the scientific evidence into practice. The science presented covered a range of topics related to pediatric obesity, including the role of genetic differences, epigenetic events influenced by in utero development, pre-pregnancy maternal obesity status, maternal nutrition and maternal weight gain on developmental programming of adiposity in offspring. Finally, the relative merits of a range of various behavioral approaches targeted at pediatric obesity were covered, together with the specific roles of pharmacotherapy and bariatric surgery in pediatric populations. In summary, pediatric obesity is a very challenging problem that is unprecedented in evolutionary terms; one which has the capacity to negate many of the health benefits that have contributed to the increased longevity observed in the developed world.

A Feasibility Study of the Flare-Cylinder Configuration as a Reentry Body Shape for an Intermediate Range Ballistic Missile

NASA Technical Reports Server (NTRS)

Garland, B. J.; Hall, J. R.

1958-01-01

A study has been made of a flare-cylinder configuration to investigate its feasibility as a reentry body of an intermediate range ballistic missile. Factors considered were heating, weight, stability, and impact velocity. A series of trajectories covering the possible range of weight-drag ratios were computed for simple truncated nose shapes of varying pointedness, and hence varying weight-drag ratios. Four trajectories were chosen for detailed temperature computation from among those trajectories estimated to be possible. Temperature calculations were made for both "conventional" (for example, copper, Inconel, and stainless steel) and "unconventional" (for example, beryllium and graphite) materials. Results of the computations showed that an impact Mach number of 0.5 was readily obtainable for a body constructed from conventional materials. A substantial increase in subsonic impact velocity above a Mach number of 0.5 was possible without exceeding material temperature limits. A weight saving of up to 134 pounds out of 822 was possible with unconventional materials. This saving represents 78 percent of the structural weight. Supersonic impact would require construction of the body from unconventional materials but appeared to be well within the range of attainability.

Proximate analysis and some antinutritional factor constituents in selected varieties of Jamaican yams (Dioscorea and Rajana spp.).

PubMed

McAnuff, Marie A; Omoruyi, Felix O; Sotelo-López, Angela; Asemota, Helen N

2005-06-01

Two wild (Dioscorea polygonoides and Rajana cordata) and seven cultivated varieties of Jamaican yams (Dioscorea spp.) were analyzed for their proximate composition and the levels of antinutritional factors. The protein level range was 47.8 +/- 2.6 to 88.0 +/- 2.5 g/kg dry weight. The lowest level was seen in D. cayenensis. The range for the dietary fiber content in the tubers was 16.3 +/- 0.7 to 63.5 +/- 0.4 g/kg dry weight. The wild yam varieties recorded higher levels. Saponins level was <600 mg/kg dry weight in all the tubers analyzed except for bitter yam (2962.5 +/- 60.5 mg/kg dry weight). Total phenol content ranged from 1.3 +/- 0.1 to 79.3 +/- 6.1 g/kg while total condensed tannin content ranged from 0.1 +/- 0.0 to 26.7 +/- 3.8 g/kg dry weight. Samples that showed high levels of phenols also had high levels of condensed tannins. All the samples analyzed contained low levels of lectins and no alkaloids were detected. The levels of antinutritional factors did not clearly delineate the wild varieties from the edible varieties.

Control performance of paper-based blood analysis devices through paper structure design.

PubMed

Li, Lizi; Huang, Xiaolei; Liu, Wen; Shen, Wei

2014-12-10

In this work, we investigated the influence of paper structure on the performance of paper-based analytical devices that are used for blood analysis. The question that we aimed to answer is how the fiber type (i.e., softwood and hardwood fibers) influences the fiber network structure of the paper, which affects the transport of red blood cells (RBCs) in paper. In the experimental design, we isolated the influence of fiber types on the paper structure from all other possible influencing factors by removing the fines from the pulps and not using any additives. Mercury porosimetry was employed to characterize the pore structures of the paper sheets. The results show that papers with a low basis weight that are made with short hardwood fibers have a higher porosity (i.e., void fraction) and simpler pore structures compared with papers made with long softwood fibers. RBC transport in paper carried by saline solution was investigated in two modes: lateral chromatographic elution and vertical flow-through. The results showed that the complexity of the paper's internal pore structure has a dominant influence on the transport of RBCs in paper. Hardwood fiber sheets with a low basis weight have a simple internal pore structure and allow for the easy transport of RBCs. Blood-typing sensors built with low basis weight hardwood fibers deliver high-clarity assays. Softwood fiber papers are found to have a more complex pore structure, which makes RBC transport more difficult, leading to blood-typing results of low clarity. This study provides the principle of paper sheet design for paper-based blood analysis sensors.

Ozone and sulfur dioxide effects on tall fescue. II. Alteration of quality constituents. [Festuca arundinacea

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flagler, R.B.; Youngner, V.B.

A greenhouse study was conducted to determine whether ozone (O/sub 3/) and sulfur dioxide (SO/sub 2/) might alter forage quality parameters of tall fescue (Festuca arundinacea Schreb. Alta). Plants were exposed weekly to four O/sub 3/ treatments, 0, 0.10, 0.20, and 0.30 ..mu..L L/sup -1/; with or without 0.10 ..mu..L L/sup -1/ SO/sub 2/, 6 h d/sup -1/ for 12 weeks. Ozone had a much greater impact on forage quality than did SO/sub 2/. Ozone increased protein content on a g kg/sup -1/ basis and decreased protein on a weight per plant basis. Ozone reduced crude fat, crude fiber, andmore » total nonstructural carbohydrate contents of the forage. Crude ash content increased due to O/sub 3/ exposure. On a weight per plant basis, O/sub 3/ decreased the forage concentration of Ca, Mg, and P. Ozone increased Ca concentration of herbage. Sulfur dioxide increased ash content of the forage. Phosphorus concentration and weight per plant of Mg and P were all reduced by SO/sub 2/ Significant pollutant interactions occurred for crude fiber, crude ash, total Mg, and total P contents of forage. While treatments resulted in some apparent increases in forage quality, these were at the expense of yield. The most adverse effects on forage quality were an increase in ash content which resulted from an interaction of SO/sub 2/ with O/sub 3/, and a reduction in soluble carbohydrate content of shoots due to O/sub 3/.« less

Consensus statement: appropriate consumer education and communication programs for weight- loss agents in Asia.

PubMed

Chan, Siew Pheng; Chui, William C; Lo, Kwok Wing; Huang, Kuo-Chin; Leyesa, Normita D; Lin, Wen-Yuan; Mirasol, Roberto C; Robles, Yolanda R; Tey, Beng Hea; Paraidathathu, Thomas

2012-07-01

The increasing prevalence of overweight and obesity worldwide demands increased efforts in the prevention and management of obesity. This article aims to present consensus statements promoting appropriate consumer education and communication programs for weight-loss agents in Asia. Panel members from various disciplines developed consensus statements based on an expert meeting on the benefits of consumer education and communication programs for over-the-counter weight-loss agents. Key opinion leaders discussed relevant data that served as the basis of the recommendations. Obesity is a growing epidemic in Asia, turning the region into a potential market for weight-loss products and services. Current trends in direct-to-consumer advertising demonstrate the pervasiveness of false representations lacking adequate substantiation. Relevant issues and recommendations were established. Public education on weight management is a shared responsibility; there is a need to raise public awareness of obesity and its health-related consequences. Advertising guidelines should ensure responsible direct-to-consumer advertising of weight-loss agents.

Practicable group testing method to evaluate weight/weight GMO content in maize grains.

PubMed

Mano, Junichi; Yanaka, Yuka; Ikezu, Yoko; Onishi, Mari; Futo, Satoshi; Minegishi, Yasutaka; Ninomiya, Kenji; Yotsuyanagi, Yuichi; Spiegelhalter, Frank; Akiyama, Hiroshi; Teshima, Reiko; Hino, Akihiro; Naito, Shigehiro; Koiwa, Tomohiro; Takabatake, Reona; Furui, Satoshi; Kitta, Kazumi

2011-07-13

Because of the increasing use of maize hybrids with genetically modified (GM) stacked events, the established and commonly used bulk sample methods for PCR quantification of GM maize in non-GM maize are prone to overestimate the GM organism (GMO) content, compared to the actual weight/weight percentage of GM maize in the grain sample. As an alternative method, we designed and assessed a group testing strategy in which the GMO content is statistically evaluated based on qualitative analyses of multiple small pools, consisting of 20 maize kernels each. This approach enables the GMO content evaluation on a weight/weight basis, irrespective of the presence of stacked-event kernels. To enhance the method's user-friendliness in routine application, we devised an easy-to-use PCR-based qualitative analytical method comprising a sample preparation step in which 20 maize kernels are ground in a lysis buffer and a subsequent PCR assay in which the lysate is directly used as a DNA template. This method was validated in a multilaboratory collaborative trial.

Taking weight-loss supplements may elicit liberation from dietary control. A laboratory experiment.

PubMed

Chang, Yevvon Yi-Chi; Chiou, Wen-Bin

2014-01-01

Given that changes in diet and exercise habits are difficult to initiate and maintain, the use of weight-loss supplements has become an appealing alternative approach to weight management for many individuals. The current research examined whether the use of weight-loss supplements induced overly optimistic assessments of progress toward weight reduction, leading to psychological abdication of dietary regulation. Participants were randomly assigned to take either an identified placebo or a purported weight-loss supplement (actually the same placebo). Each participant reported perceived progress toward weight reduction following the manipulation. Consumption of snacks in a taste test and choice of sugary drinks were recorded. The results showed that participants receiving a purported supplement ate more in a taste task and preferred larger quantities of sugar in their reward drinks than did controls. Mediation analysis supported that the perception of progress toward weight reduction contributed to the liberating effect. Using weight-loss supplements may increase perceived progress toward weight reduction but decrease dietary self-regulation. These thought-provoking findings can serve as a basis for educating the public about the myth that they are free to feel liberated from the need to regulate their eating when using weight-loss supplements. Copyright © 2013 Elsevier Ltd. All rights reserved.

14 CFR 31.14 - Weight limits.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Weight limits. 31.14 Section 31.14 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: MANNED FREE BALLOONS Flight Requirements § 31.14 Weight limits. (a) The range of weights over...

Managing your weight gain during pregnancy

MedlinePlus

... basis for a healthy pregnancy. For most pregnant women, the right amount of calories is: 1,800 calories per ... are already overweight when they get pregnant. Other women gain ... on eating the right foods and staying active. If you do not ...

50 CFR 261.103 - Basis for determination of a U.S. Standard for Grades.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., fish fillet). (2) Product forms, which describe the types, styles and market forms covered by the...., bruises, blood spots, bones, black spots, coating defects, 1-inch squares, percent by weight, ratios). (8...

50 CFR 261.103 - Basis for determination of a U.S. Standard for Grades.

Code of Federal Regulations, 2010 CFR

2010-10-01

... fillet). (2) Product forms, which describe the types, styles and market forms covered by the standard (e...., bruises, blood spots, bones, black spots, coating defects, 1-inch squares, percent by weight, ratios). (8...

50 CFR 261.103 - Basis for determination of a U.S. Standard for Grades.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., fish fillet). (2) Product forms, which describe the types, styles and market forms covered by the...., bruises, blood spots, bones, black spots, coating defects, 1-inch squares, percent by weight, ratios). (8...

50 CFR 261.103 - Basis for determination of a U.S. Standard for Grades.

Code of Federal Regulations, 2011 CFR

2011-10-01

... fillet). (2) Product forms, which describe the types, styles and market forms covered by the standard (e...., bruises, blood spots, bones, black spots, coating defects, 1-inch squares, percent by weight, ratios). (8...

50 CFR 261.103 - Basis for determination of a U.S. Standard for Grades.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., fish fillet). (2) Product forms, which describe the types, styles and market forms covered by the...., bruises, blood spots, bones, black spots, coating defects, 1-inch squares, percent by weight, ratios). (8...

40 CFR Table 3 to Subpart Dddd of... - Work Practice Requirements

Code of Federal Regulations, 2010 CFR

2010-07-01

... block average inlet moisture content of less than or equal to 30 percent (by weight, dry basis); AND... redryers Process veneer that has been previously dried, such that the 24-hour block average inlet moisture...

Discrete-time model reduction in limited frequency ranges

NASA Technical Reports Server (NTRS)

Horta, Lucas G.; Juang, Jer-Nan; Longman, Richard W.

1991-01-01

A mathematical formulation for model reduction of discrete time systems such that the reduced order model represents the system in a particular frequency range is discussed. The algorithm transforms the full order system into balanced coordinates using frequency weighted discrete controllability and observability grammians. In this form a criterion is derived to guide truncation of states based on their contribution to the frequency range of interest. Minimization of the criterion is accomplished without need for numerical optimization. Balancing requires the computation of discrete frequency weighted grammians. Close form solutions for the computation of frequency weighted grammians are developed. Numerical examples are discussed to demonstrate the algorithm.

Growth hormone (GH) dosing during catch-up growth guided by individual responsiveness decreases growth response variability in prepubertal children with GH deficiency or idiopathic short stature.

PubMed

Kriström, Berit; Aronson, A Stefan; Dahlgren, Jovanna; Gustafsson, Jan; Halldin, Maria; Ivarsson, Sten A; Nilsson, Nils-Osten; Svensson, Johan; Tuvemo, Torsten; Albertsson-Wikland, Kerstin

2009-02-01

Weight-based GH dosing results in a wide variation in growth response in children with GH deficiency (GHD) or idiopathic short stature (ISS). The hypothesis tested was whether individualized GH doses, based on variation in GH responsiveness estimated by a prediction model, reduced variability in growth response around a set height target compared with a standardized weight-based dose. A total of 153 short prepubertal children diagnosed with isolated GHD or ISS (n = 43) and at least 1 SD score (SDS) below midparental height SDS (MPH(SDS)) were included in this 2-yr multicenter study. The children were randomized to either a standard (43 microg/kg.d) or individualized (17-100 microg/kg.d) GH dose. We measured the deviation of height(SDS) from individual MPH(SDS) (diffMPH(SDS)). The primary endpoint was the difference in the range of diffMPH(SDS) between the two groups. The diffMPH(SDS) range was reduced by 32% in the individualized-dose group relative to the standard-dose group (P < 0.003), whereas the mean diffMPH(SDS) was equal: -0.42 +/- 0.46 and -0.48 +/- 0.67, respectively. Gain in height(SDS) 0-2 yr was equal for the GH-deficient and ISS groups: 1.31 +/- 0.47 and 1.36 +/- 0.47, respectively, when ISS was classified on the basis of maximum GH peak on the arginine-insulin tolerance test or 24-h profile. Individualized GH doses during catch-up growth significantly reduce the proportion of unexpectedly good and poor responders around a predefined individual growth target and result in equal growth responses in children with GHD and ISS.

Geographic Differences in Persistent Organic Pollutant Levels of Yellowfin Tuna.

PubMed

Nicklisch, Sascha C T; Bonito, Lindsay T; Sandin, Stuart; Hamdoun, Amro

2017-06-26

Fish are a source of persistent organic pollutants (POPs) in the human diet. Although species, trophic level, and means of production are typically considered in predicting fish pollutant load, and thus recommendations of consumption, capture location is usually not accounted for. Yellowfin tuna ( Thunnus albacares ) are harvested from across the world's oceans and are widely consumed. Here, we determined geographic variation in the overall mass, concentration, and composition of POPs in yellowfin and examined the differences in levels of several POP congeners of potential relevance to human health. We sampled dorsal muscle of 117 yellowfin tuna from 12 locations worldwide, and measured POP levels using combined liquid or gas chromatography and mass spectrometry according to U.S. Environmental Protection Agency standard procedures. POP levels varied significantly among sites, more than 36-fold on a mass basis. Individual fish levels ranged from 0.16 to 138.29 ng/g wet weight and lipid-normalized concentrations from 0.1 to 12.7 μM. Levels of 10 congeners that interfere with the cellular defense protein P-glycoprotein, termed transporter interfering compounds (TICs), ranged from 0.05 to 35.03 ng/g wet weight and from 0.03 to 3.32 μM in tuna lipid. Levels of TICs, and their individual congeners, were strongly associated with the overall POP load. Risk-based analysis of several carcinogenic POPs indicated that the fish with the highest levels of these potentially harmful compounds were clustered at specific geographic locations. Capture location is an important consideration when assessing the level and risk of human exposure to POPs through ingestion of wild fish. https://doi.org/10.1289/EHP518.

Geographic Differences in Persistent Organic Pollutant Levels of Yellowfin Tuna

PubMed Central

Nicklisch, Sascha C.T.; Bonito, Lindsay T.; Sandin, Stuart

2017-01-01

Background: Fish are a source of persistent organic pollutants (POPs) in the human diet. Although species, trophic level, and means of production are typically considered in predicting fish pollutant load, and thus recommendations of consumption, capture location is usually not accounted for. Objectives: Yellowfin tuna (Thunnus albacares) are harvested from across the world’s oceans and are widely consumed. Here, we determined geographic variation in the overall mass, concentration, and composition of POPs in yellowfin and examined the differences in levels of several POP congeners of potential relevance to human health. Methods: We sampled dorsal muscle of 117 yellowfin tuna from 12 locations worldwide, and measured POP levels using combined liquid or gas chromatography and mass spectrometry according to U.S. Environmental Protection Agency standard procedures. Results: POP levels varied significantly among sites, more than 36-fold on a mass basis. Individual fish levels ranged from 0.16 to 138.29ng/g wet weight and lipid-normalized concentrations from 0.1 to 12.7μM. Levels of 10 congeners that interfere with the cellular defense protein P-glycoprotein, termed transporter interfering compounds (TICs), ranged from 0.05 to 35.03ng/g wet weight and from 0.03 to 3.32μM in tuna lipid. Levels of TICs, and their individual congeners, were strongly associated with the overall POP load. Risk-based analysis of several carcinogenic POPs indicated that the fish with the highest levels of these potentially harmful compounds were clustered at specific geographic locations. Conclusions: Capture location is an important consideration when assessing the level and risk of human exposure to POPs through ingestion of wild fish. https://doi.org/10.1289/EHP518 PMID:28686554

Importance of early postnatal weight gain for normal retinal angiogenesis in very preterm infants: a multicenter study analyzing weight velocity deviations for the prediction of retinopathy of prematurity.

PubMed

Wu, Carolyn; Löfqvist, Chatarina; Smith, Lois E H; VanderVeen, Deborah K; Hellström, Ann

2012-08-01

To assess WINROP (https://winrop.com), an algorithm using postnatal weight measurements, as a tool for the prediction of retinopathy of prematurity (ROP) in a large geographically and racially diverse study population. WINROP analysis was performed retrospectively on conventionally at-risk infants from 10 neonatal intensive careunits.Weight measurements were entered into WINROP, which signals an alarm for an abnormal weight gain rate. Infants were classified into categories of no alarm (unlikely to develop type 1ROP)and alarm (at risk for developing type 1ROP).Use of WINROP requires that an infant has (1) gestational age less than 32 weeks at birth, (2) weekly weight measurements,(3) physiologic weight gain,and(4)absence of other pathologic retinal vascular disease. A total of 1706 infants with a median gestational age of 28 weeks (range, 22-31 weeks) and median birth weight of 1016 g (range, 378-2240 g) were included in the study analysis. An alarm occurred in 1101 infants (64.5%), with a median time from birth to alarm of 3 weeks (range, 0-12 weeks) and from alarm to treatment of 8 weeks (range, 1 day to 22 weeks). The sensitivity of WINROP was 98.6% and the negative predictive value was 99.7%. Two infants with type 1 ROP requiring treatment after 40 weeks' postmenstrual age did not receive an alarm. The WINROP system is a useful adjunct for ROP screening that identifies high-risk infants early to optimize care and potentially reduce the overall number of diagnostic ROP examinations.

Weight Loss Outcomes in Laparoscopic Vertical Sleeve Gastrectomy (LVSG) Versus Laparoscopic Roux-en-Y Gastric Bypass (LRYGB) Procedures: A Meta-Analysis and Systematic Review of Randomized Controlled Trials.

PubMed

Osland, Emma; Yunus, Rossita M; Khan, Shahjahan; Memon, Breda; Memon, Muhammed A

2017-02-01

Laparoscopic Roux-en-Y gastric bypass (LRYGB) and laparoscopic vertical sleeve gastrectomy (LVSG) have been proposed as cost-effective strategies to manage morbid obesity. The aim of this meta-analysis was to compare the postoperative weight loss outcomes reported in randomized control trials (RCTs) for LVSG versus LRYGB procedures. RCTs comparing the weight loss outcomes following LVSG and LRYGB in adult population between January 2000 and November 2015 were selected from PubMed, Medline, Embase, Science Citation Index, Current Contents, and the Cochrane database. The review was prepared in accordance with Preferred Reporting of Systematic Reviews and Meta-Analyses (PRISMA). Nine unique RCTs described over 10 publications involving a total of 865 patients (LVSG, n=437; LRYGB, n=428) were analyzed. Postoperative follow-up ranged from 3 months to 5 years. Twelve-month excess weight loss (EWL) for LVSG ranged from 69.7% to 83%, and for LRYGB, ranged from 60.5% to 86.4%. A number of studies reported slow weight gain between the second and third years of postoperative follow-up ranging from 1.4% to 4.2%EWL. This trend was seen to continue to 5 years postoperatively (8% to 10%EWL) for both procedures. In conclusion, LRYGB and LVSG are comparable with regards to the weight loss outcomes in the short term, with LRYGB achieving slightly greater weight loss. Slow weight recidivism is observed after the first postoperative year following both procedures. Long-term reporting of outcomes obtained from well-designed studies using intention-to-treat analyses are identified as a major gap in the literature at present.

Estimating geographic variation on allometric growth and body condition of Blue Suckers with quantile regression

USGS Publications Warehouse

Cade, B.S.; Terrell, J.W.; Neely, B.C.

2011-01-01

Increasing our understanding of how environmental factors affect fish body condition and improving its utility as a metric of aquatic system health require reliable estimates of spatial variation in condition (weight at length). We used three statistical approaches that varied in how they accounted for heterogeneity in allometric growth to estimate differences in body condition of blue suckers Cycleptus elongatus across 19 large-river locations in the central USA. Quantile regression of an expanded allometric growth model provided the most comprehensive estimates, including variation in exponents within and among locations (range = 2.88–4.24). Blue suckers from more-southerly locations had the largest exponents. Mixed-effects mean regression of a similar expanded allometric growth model allowed exponents to vary among locations (range = 3.03–3.60). Mean relative weights compared across selected intervals of total length (TL = 510–594 and 594–692 mm) in a multiplicative model involved the implicit assumption that allometric exponents within and among locations were similar to the exponent (3.46) for the standard weight equation. Proportionate differences in the quantiles of weight at length for adult blue suckers (TL = 510, 594, 644, and 692 mm) compared with their average across locations ranged from 1.08 to 1.30 for southern locations (Texas, Mississippi) and from 0.84 to 1.00 for northern locations (Montana, North Dakota); proportionate differences for mean weight ranged from 1.13 to 1.17 and from 0.87 to 0.95, respectively, and those for mean relative weight ranged from 1.10 to 1.18 and from 0.86 to 0.98, respectively. Weights for fish at longer lengths varied by 600–700 g within a location and by as much as 2,000 g among southern and northern locations. Estimates for the Wabash River, Indiana (0.96–1.07 times the average; greatest increases for lower weights at shorter TLs), and for the Missouri River from Blair, Nebraska, to Sioux City, Iowa (0.90–1.00 times the average; greatest decreases for lower weights at longer TLs), were examined in detail to explain the additional information provided by quantile estimates.

Ranging behavior relates to welfare indicators pre- and post-range access in commercial free-range broilers.

PubMed

Taylor, Peta S; Hemsworth, Paul H; Groves, Peter J; Gebhardt-Henrich, Sabine G; Rault, Jean-Loup

2018-06-01

Little is known about the effect of accessing an outdoor range on chicken welfare. We tracked individual ranging behavior of 538 mixed-sex Ross 308 chickens on a commercial farm across 4 flocks in winter and summer. Before range access, at 17 to 19 d of age, and post-range access, at 30 to 33 and 42 to 46 d of age in winter and summer flocks respectively, welfare indicators were measured on chickens (pre-range: winter N = 292; summer N = 280; post-range: winter N = 131; summer N = 140), including weight, gait score, dermatitis and plumage condition. Post-ranging autopsies were performed (winter: N = 170; summer: N = 60) to assess breast burn, leg health, and ascites. Fewer chickens accessed the range in winter flocks (32.5%) than summer flocks (82.1%). Few relationships between welfare and ranging were identified in winter, likely due to minimal ranging and the earlier age of post-ranging data collection compared to summer flocks. In summer flocks prior to range access, chickens that accessed the range weighed 4.9% less (P = 0.03) than chickens that did not access the range. Pre-ranging weight, gait score, and overall plumage cover predicted the amount of range use by ranging chickens in summer flocks (P < 0.01), but it explained less than 5% of the variation, suggesting other factors are associated with ranging behavior. In summer flocks post-range access, ranging chickens weighed 12.8% less than non-ranging chickens (P < 0.001). More range visits were associated with lower weight (P < 0.01), improved gait scores (P = 0.02), greater breast plumage cover (P = 0.02), lower ascites index (P = 0.01), and less pericardial fluid (P = 0.04). More time spent on the range was associated with lower weight (P < 0.01) and better gait scores (P < 0.01). These results suggest that accessing an outdoor range in summer is partly related to changes in broiler chicken welfare. Further investigations are required to determine causation.

A data management system for weight control and design-to-cost

NASA Technical Reports Server (NTRS)

Bryant, J. C.

1978-01-01

The definition of the mass properties data of aircraft changed on a daily basis as do design details of the aircraft. This dynamic nature of the definition has generally encouraged those responsible for the data to update the data on a weekly or monthly basis. The by-product of these infrequent updates was the requirement of manual records to maintain daily activity. The development of WAVES changed the approach to management of mass properties data. WAVES has given the ability to update the data on a daily basis thereby eliminating the need for manual records. WAVES has demonstrated that a software product can support a data management system for engineering data.

The effects of gait training with body weight support (BWS) with no body weight support (no-BWS) in stroke patients.

PubMed

Ullah, Muhammad Asad; Shafi, Hina; Khan, Ghazanfar Ali; Malik, Arshad Nawaz; Amjad, Imran

2017-07-01

The purpose of this study was to measure the clinical outcomes for patients with stroke after gait training with body weight support (BWS) and with no body weight support (no-BWS).Experimental group was trained to walk by a BWS system with overhead harness (BWS group), and Control group was trained with full weight bearing walk on their lower extremities. Treatment session comprised of six weeks training. Treatment outcomes were assessed on the basis of Timed 10 Meter Walk Test, Timed Get Up and Go Test and Dynamic Gait Index. There was a significant (P<0.05) difference in BWS and NBWS for Dynamic Gait Index, Timed Get Up and Go Test, Timed 10 Meter Walk Test (Self-Selected Velocity), and Timed 10 Meter Walk Test (Fast-Velocity). Training of gait in stroke patients while a percentage of their body weight supported by a harness, resulted in better walking abilities than the Training of gait while full weight was placed on patient's lower extremities.

The role of obesity in the relation between total water intake and urine osmolality in US adults, 2009-2012.

PubMed

Rosinger, Asher Y; Lawman, Hannah G; Akinbami, Lara J; Ogden, Cynthia L

2016-12-01

Adequate water intake is critical to physiologic and cognitive functioning. Although water requirements increase with body size, it remains unclear whether weight status modifies the relation between water intake and hydration status. We examined how the association between water intake and urine osmolality, which is a hydration biomarker, varied by weight status. NHANES cross-sectional data (2009-2012) were analyzed in 9601 nonpregnant adults aged ≥20 y who did not have kidney failure. Weight status was categorized with the use of body mass index on the basis of measured height and weight (underweight or normal weight, overweight, and obesity). Urine osmolality was determined with the use of freezing-point depression osmometry. Hypohydration was classified according to the following age-dependent formula: ≥831 mOsm/kg - [3.4 × (age - 20 y)]. Total water intake was determined with the use of a 24-h dietary recall and was dichotomized as adequate or low on the basis of the Institute of Medicine's adequate intake recommendations for men and women (men: ≥3.7 or <3.7 L; nonlactating women: ≥2.7 or <2.7 L; lactating women: ≥3.8 or <3.8 L for adequate or low intakes, respectively). We tested interactions and conducted linear and log-binomial regressions. Total water intake (P = 0.002), urine osmolality (P < 0.001), and hypohydration prevalence (P < 0.001) all increased with higher weight status. Interactions between weight status and water intake status were significant in linear (P = 0.005) and log-binomial (P = 0.015) models, which were then stratified. The prevalence ratio of hypohydration between subjects with adequate water intake and those with low water intake was 0.56 (95% CI: 0.43, 0.73) in adults who were underweight or normal weight, 0.67 (95% CI: 0.57, 0.79) in adults who were overweight, and 0.78 (95% CI: 0.70, 0.88) in adults who were obese. On a population level, obesity modifies the association between water intake and hydration status. © 2016 American Society for Nutrition.

Optimization of Levan Production by Cold-Active Bacillus licheniformis ANT 179 and Fructooligosaccharide Synthesis by Its Levansucrase.

PubMed

Xavier, Janifer Raj; Ramana, Karna Venkata

2017-03-01

Fructooligosaccharides (FOS) and levan attract much attention due to a wide range of applications in food technology and pharmaceutical and cosmetic industry. Bacillus licheniformis ANT 179, isolated from Antarctica soil, produced levansucrase and levan in a medium containing sucrose as carbon substrate. In this study, characterization of levansucrase and production of short-chain FOS and levan were investigated. Temperature and pH optimum of the enzyme were found to be 60 °C and pH 6.0, respectively. The optimization of fermentation conditions for levan production using sugarcane juice by response surface methodology (RSM) was carried out. Central composite rotatable design was used to study the main and the interactive effects of medium components: sugarcane juice and casein peptone concentration on levan production by the bacterium. The optimized medium with sugarcane juice at 20 % (v/v) and casein peptone at 2 % (w/v) was found to be optimal at an initial pH of 7.0 and incubation temperature of 35 °C for 48 h. Under these conditions, the maximum levan concentration was 50.25 g/L on wet weight basis and 16.35 g/L on dry weight basis. The produced inulin type FOS (kestose and neokestose) and levan were characterized by Fourier transform infrared spectroscopy (FT-IR) and nuclear magnetic resonance (NMR) analysis. The study revealed that the levansucrase could form FOS from sucrose. The locally available low-cost substrate such as sugarcane juice in the form of a renewable substrate is proposed to be suitable even for scale-up production of enzyme and FOS for industrial applications. The levan and FOS synthesized by the bacterium are suitable for food applications and biomedical uses as the bacterium has GRAS status and devoid of endotoxin as compared to other Gram-negative bacteria.

Evidence for a dose-response relationship between occupational noise and blood pressure.

PubMed

Talbott, E O; Gibson, L B; Burks, A; Engberg, R; McHugh, K P

1999-01-01

In this study, we investigated the role of occupational noise exposure and blood pressure among workers at 2 plants. A noise-exposed plant (plant 1, > or = 89 dBA) and a less-noise-exposed plant (plant 2, < or = 83 dBA) were chosen. Exposure was based on department-wide average noise measures; on the basis of job location and adjusting for layoffs during their employment at the plant, a cumulative time-weighted average noise level was calculated for each worker. The study population comprised 329 males in plant 1 and 314 males in plant 2. Their ages ranged from 40 to 63 y (mean ages = 49.6 and 48.7, respectively), and they had worked at least 15 y at the plant. The clinical examination was administered prior to the workday and measured height, weight, pulse, and blood pressure. In addition, we noted medical and personal-habits histories, including alcohol intake and cigarette smoking patterns. We used a questionnaire to determine in-depth occupation, military history, noisy hobbies, and family history of hypertension. When individuals who took blood-pressure medication were removed from the analysis, t tests for differences in average blood pressure between plants showed a mean systolic blood pressure of 123.3 mm Hg in plant 1 versus 120.8 mm Hg in plant 2 (p = .06) and a mean diastolic blood pressure of 80.3 mm Hg versus 77.8 mm Hg in Plant 1 and 2, respectively (p = .014). On the basis of data from the combined plants, multivariate analysis revealed that age, body mass index, cumulative noise exposure, current use of blood pressure medications, and alcohol intake were significant predictors for systolic blood pressure. Cumulative noise exposure was a significant predictor of diastolic blood pressure in plant 1 but not in plant 2, possibly reflecting a threshold effect.

The genetic basis of pectoralis major myopathies in modern broiler chicken lines

PubMed Central

Bailey, Richard A.; Watson, Kellie A.; Bilgili, S. F.; Avendano, Santiago

2015-01-01

This is the first report providing estimates of the genetic basis of breast muscle myopathies (BMM) and their relationship with growth and yield in broiler chickens. In addition, this paper addresses the hypothesis that genetic selection for increase breast yield has contributed to the onset of BMM. Data were analyzed from ongoing recording of BMM within the Aviagen breeding program. This study focused on three BMM: deep pectoral myopathy (DPM; binary trait), white striping (WS; 4 categories) and wooden breast (WB; 3 categories). Data from two purebred commercial broiler lines (A and B) were utilized providing greater than 40,000 meat quality records per line. The difference in selection history between these two lines has resulted in contrasting breast yield (BY): 29% for Line A and 21% for Line B. Data were analyzed to estimate genetic parameters using a multivariate animal model including six traits: body weight (BW), processing body weight (PW), BY, DPM, WB, and WS, in addition to the appropriate fixed effects and permanent environmental effect of the dam. Results indicate similar patterns of heritability and genetic correlations for the two lines. Heritabilities (h2) of BW, PW and BY ranged from 0.271–0.418; for DPM and WB h2 <0.1; and for WS h2 ≤0.338. Genetic correlations between the BMM and BW, PW, or BY were ≤0.132 in Line A and ≤0.248 in Line B. This paper demonstrates the polygenic nature of these traits and the low genetic relationships with BW, PW, and BY, which facilitates genetic improvement across all traits in a balanced breeding program. It also highlights the importance of understanding the environmental and/or management factors that contribute greater than 65% of the variance in the incidence of white striping of breast muscle and more than 90% of the variance of the incidence of wooden breast and deep pectoral myopathy in broiler chickens. PMID:26476091

Using a system of differential equations that models cattle growth to uncover the genetic basis of complex traits.

PubMed

Freua, Mateus Castelani; Santana, Miguel Henrique de Almeida; Ventura, Ricardo Vieira; Tedeschi, Luis Orlindo; Ferraz, José Bento Sterman

2017-08-01

The interplay between dynamic models of biological systems and genomics is based on the assumption that genetic variation of the complex trait (i.e., outcome of model behavior) arises from component traits (i.e., model parameters) in lower hierarchical levels. In order to provide a proof of concept of this statement for a cattle growth model, we ask whether model parameters map genomic regions that harbor quantitative trait loci (QTLs) already described for the complex trait. We conducted a genome-wide association study (GWAS) with a Bayesian hierarchical LASSO method in two parameters of the Davis Growth Model, a system of three ordinary differential equations describing DNA accretion, protein synthesis and degradation, and fat synthesis. Phenotypic and genotypic data were available for 893 Nellore (Bos indicus) cattle. Computed values for parameter k 1 (DNA accretion rate) ranged from 0.005 ± 0.003 and for α (constant for energy for maintenance requirement) 0.134 ± 0.024. The expected biological interpretation of the parameters is confirmed by QTLs mapped for k 1 and α. QTLs within genomic regions mapped for k 1 are expected to be correlated with the DNA pool: body size and weight. Single nucleotide polymorphisms (SNPs) which were significant for α mapped QTLs that had already been associated with residual feed intake, feed conversion ratio, average daily gain (ADG), body weight, and also dry matter intake. SNPs identified for k 1 were able to additionally explain 2.2% of the phenotypic variability of the complex ADG, even when SNPs for k 1 did not match the genomic regions associated with ADG. Although improvements are needed, our findings suggest that genomic analysis on component traits may help to uncover the genetic basis of more complex traits, particularly when lower biological hierarchies are mechanistically described by mathematical simulation models.

Relations of thyroid function to body weight: cross-sectional and longitudinal observations in a community-based sample.

PubMed

Fox, Caroline S; Pencina, Michael J; D'Agostino, Ralph B; Murabito, Joanne M; Seely, Ellen W; Pearce, Elizabeth N; Vasan, Ramachandran S

2008-03-24

Overt hypothyroidism and hyperthyroidism may be associated with weight gain and loss. We assessed whether variations in thyroid function within the reference (physiologic) range are associated with body weight. Framingham Offspring Study participants (n=2407) who attended 2 consecutive routine examinations, were not receiving thyroid hormone therapy, and had baseline serum thyrotropin (TSH) concentrations of 0.5 to 5.0 mIU/L and follow-up concentrations of 0.5 to 10.0 mIU/L were included in this study. Baseline TSH concentrations were related to body weight and body weight change during 3.5 years of follow-up. At baseline, adjusted mean weight increased progressively from 64.5 to 70.2 kg in the lowest to highest TSH concentration quartiles in women (P< .001 for trend), and from 82.8 (lowest quartile) to 85.6 kg (highest quartile) in men (P= .007 for trend). During 3.5 years of follow-up, mean (SD) body weight increased by 1.5 (5.6) kg in women and 1.0 (5.0) kg in men. Baseline TSH concentrations were not associated with weight change during follow-up. However, an increase in TSH concentration at follow-up was positively associated with weight gain in women (0.5-2.3 kg across increasing quartiles of TSH concentration change; P< .001 for trend) and men (0.4-1.3 kg across quartiles of TSH concentration change; P= .007 for trend). Thyroid function (as assessed by serum TSH concentration) within the reference range is associated with body weight in both sexes. Our findings raise the possibility that modest increases in serum TSH concentrations within the reference range may be associated with weight gain.

Cermet crucible for metallurgical processing

DOEpatents

Boring, Christopher P.

1995-01-01

A cermet crucible for metallurgically processing metals having high melting points comprising a body consisting essentially of a mixture of calcium oxide and erbium metal, the mixture comprising calcium oxide in a range between about 50 and 90% by weight and erbium metal in a range between about 10 and 50% by weight.

Reliability of the cervical vertebrae maturation (CVM) method.

PubMed

Predko-Engel, A; Kaminek, M; Langova, K; Kowalski, P; Fudalej, P S

2015-01-01

To assess the reliability of the cervical vertebrae maturation method (CVM). Skeletal maturity estimation can influence the manner and time of orthodontic treatment. The CVM method evaluates skeletal growth on the basis of the changes in the morphology of cervical vertebrae C2, C3, C4 during growth. These vertebrae are visible on a lateral cephalogram, so the method does not require an additional radiograph. In this website based study, 10 orthodontists with a long clinical practice (3 routinely using the method - "Routine user - RU" and 7 with less experience in the CVM method - "Non-Routine user - nonRU") rated twice cervical vertebrae maturation with the CVM method on 50 cropped scans of lateral cephalograms of children in circumpubertal age (for boys: 11.5 to 15.5 years; for girls: 10 to 14 years). Kappa statistics (with lower limits of 95% confidence intervals (CI)) and proportion of complete agreement on staging was used to evaluate intra- and inter-assessor agreement. The mean weighted kappa for intra-assessor agreement was 0.44 (range: 0.30-0.64; range of lower limits of 95% CI: 0.12-0.48) and for inter-assessor agreement was 0.28 (range: -0.01-0.58; range of lower limits of 95% CI: -0.14-0.42). The mean proportion of identical scores assigned by the same assessor was 55.2 %(range: 44-74 %) and for different pairs of assessors was 42 % (range: 16-68 %). The reliability of the CVM method is questionable and if orthodontic treatment should be initiated relative to the maximum growth, the use of additional biologic indicators should be considered (Tab. 4, Fig. 1, Ref. 24).

Intraprocedure contrast enhanced ultrasound: the value in assessing the effect of ultrasound-guided high intensity focused ultrasound ablation for uterine fibroids.

PubMed

Peng, Song; Hu, Liang; Chen, Wenzhi; Chen, Jinyun; Yang, Caiyong; Wang, Xi; Zhang, Rong; Wang, Zhibiao; Zhang, Lian

2015-04-01

To investigate the value of microbubble contrast-enhanced ultrasound (CEUS) in evaluating the treatment response of uterine fibroids to HIFU ablation. Sixty-eight patients with a solitary uterine fibroid from the First Affiliated Hospital of Chongqing Medical University were included and analyzed. All patients underwent pre- and post-treatment magnetic resonance imaging (MRI) with a standardized protocol, as well as pre-evaluation, intraprocedure, and immediate post-treatment CEUS. CEUS and MRI were compared by different radiologists. In comparison with MRI, CEUS showed that the size of fibroids, volume of fibroids, size of non-perfused regions, non-perfused volume (NPV) or fractional ablation (NPV ratio) was similar to that of MRI. In terms of CEUS examination results, the median volume of fibroids was 75.2 (interquartile range, 34.2-127.3) cm(3), the median non-perfused volume was 54.9 (interquartile range, 28.0-98.1) cm(3), the mean fractional ablation was 83.7±13.6 (range, 30.0-100.0)%. In terms of MRI examination results, the median volume of fibroids was 74.1 (interquartile range, 33.4-116.2) cm(3). On the basis of contrast-enhanced T1-weighted images immediately after HIFU treatment, the median non-perfused volume was 58.5 (interquartile range, 27.7-100.0) cm(3), the average fractional ablation was 84.2±14.2 (range, 40.0-100.0)%. CEUS clearly showed the size of fibroids and the non-perfused areas of the fibroid. Results from CEUS correlated well with results obtained from MRI. Copyright © 2015 Elsevier B.V. All rights reserved.

Acrylamide in commercial foods and intake by infants in Estonia.

PubMed

Elias, Andres; Roasto, Mati; Reinik, Mari; Nelis, Keiu; Nurk, Eha; Elias, Terje

2017-11-01

Acrylamide is formed when certain foods with low moisture are prepared at above 120 ºC, especially those foods containing asparagine and reducing sugars such as glucose and fructose. Acrylamide is a probable carcinogen, and from animal evidence the margins of exposure indicate a concern for neoplastic effects. On a body weight basis infants´ acrylamide intakes are often higher than those of adults. The aim of the study was to determine acrylamide levels in different commercially-available foods and to assess dietary acrylamide intakes by infants. The acrylamide content in samples ranged widely, from

A Range Correction for Icesat and Its Potential Impact on Ice-sheet Mass Balance Studies

NASA Technical Reports Server (NTRS)

Borsa, A. A.; Moholdt, G.; Fricker, H. A.; Brunt, Kelly M.

2014-01-01

We report on a previously undocumented range error in NASA's Ice, Cloud and land Elevation Satellite (ICESat) that degrades elevation precision and introduces a small but significant elevation trend over the ICESat mission period. This range error (the Gaussian-Centroid or 'G-C'offset) varies on a shot-to-shot basis and exhibits increasing scatter when laser transmit energies fall below 20 mJ. Although the G-C offset is uncorrelated over periods less than1 day, it evolves over the life of each of ICESat's three lasers in a series of ramps and jumps that give rise to spurious elevation trends of -0.92 to -1.90 cm yr(exp -1), depending on the time period considered. Using ICESat data over the Ross and Filchner-Ronne ice shelves we show that (1) the G-C offset introduces significant biases in ice-shelf mass balance estimates, and (2) the mass balance bias can vary between regions because of different temporal samplings of ICESat.We can reproduce the effect of the G-C offset over these two ice shelves by fitting trends to sample-weighted mean G-C offsets for each campaign, suggesting that it may not be necessary to fully repeat earlier ICESat studies to determine the impact of the G-C offset on ice-sheet mass balance estimates.

Shotgun proteomic analysis of Bombyx mori brain: emphasis on regulation of behavior and development of the nervous system.

PubMed

Wang, Guo-Bao; Zheng, Qin; Shen, Yun-Wang; Wu, Xiao-Feng

2016-02-01

The insect brain plays crucial roles in the regulation of growth and development and in all types of behavior. We used sodium dodecyl sulfate polyacrylamide gel electrophoresis and high-performance liquid chromatography - electron spray ionization tandem mass spectrometry (ESI-MS/MS) shotgun to identify the proteome of the silkworm brain, to investigate its protein composition and to understand their biological functions. A total of 2210 proteins with molecular weights in the range of 5.64-1539.82 kDa and isoelectric points in the range of 3.78-12.55 were identified. These proteins were annotated according to Gene Ontology Annotation into the categories of molecular function, biological process and cellular component. We characterized two categories of proteins: one includes behavior-related proteins involved in the regulation of behaviors, such as locomotion, reproduction and learning; the other consists of proteins related to the development or function of the nervous system. The identified proteins were classified into 283 different pathways according to KEGG analysis, including the PI3K-Akt signaling pathway which plays a crucial role in mediating survival signals in a wide range of neuronal cell types. This extensive protein profile provides a basis for further understanding of the physiological functions in the silkworm brain. © 2014 Institute of Zoology, Chinese Academy of Sciences.

40 CFR 503.43 - Pollutant limits.

Code of Federal Regulations, 2010 CFR

2010-07-01

....43 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SEWAGE SLUDGE STANDARDS FOR... in micrograms per cubic meter per gram per second. RSC = Risk specific concentration for arsenic... per day (dry weight basis). (2) The risk specific concentrations for arsenic, cadmium, and nickel used...

Wood and bark percentages and moisture contents of Minnesota pulpwood species.

Treesearch

Richard M. Marden; David C. Lothner; Edwin Kallio

1975-01-01

To help increase the use of bark for fuel or products, information is presented on the relative proportions of bark and wood by volume and weight, and also moisture contents (ovendry basis) for five northern Minnesota pulpwood species.

Weight neutrality with the DPP-4 inhibitor, vildagliptin: Mechanistic basis and clinical experience

PubMed Central

Foley, James E; Jordan, Jens

2010-01-01

Various factors may confound how diabetes medications affect a patient’s weight. Agents that induce hypoglycemia may promote weight gain through “defensive eating”. Conversely, patients whose hyperglycemia exceeds the renal glucose threshold may overeat to compensate for calories lost in urine and so gain weight when drug therapy ablates glycosuria. Some drugs, such as thiazolidinediones, may promote weight gain via increased lipid storage. Glucagon-like peptide-1 receptor agonists increase satiety, delay gastric emptying, and generally produce weight loss. Dipeptidyl peptidase (DPP)-4 inhibitors are generally weight-neutral, although modest weight loss has been observed with the DPP-4 inhibitor, vildagliptin, in patients with relatively low baseline glycemia. The weight neutrality of vildagliptin likely results in part from its intrinsically low risk for hypoglycemia. Recent studies point to additional potential mechanisms. One study found that drug-naïve patients randomized to vildagliptin exhibited significantly lower chylomicron lipid and apolipoprotein levels than placebo patients, suggesting that vildagliptin may inhibit intestinal fat extraction. Another trial found that patients randomized to vildagliptin versus placebo experienced paradoxical postprandial increases in markers of fatty acid mobilization and oxidation, in conjunction with increased sympathetic stimulation. Elaboration of these and other pathways could further clarify the origins of the favorable weight profile of vildagriptin. PMID:20730070

14 CFR 133.43 - Structures and design.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) Weight and center of gravity— (1) Weight. The total weight of the rotorcraft-load combination must not exceed the total weight approved for the rotorcraft during its type certification. (2) Center of gravity. The location of the center of gravity must, for all loading conditions, be within the range...

14 CFR 133.43 - Structures and design.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) Weight and center of gravity— (1) Weight. The total weight of the rotorcraft-load combination must not exceed the total weight approved for the rotorcraft during its type certification. (2) Center of gravity. The location of the center of gravity must, for all loading conditions, be within the range...

14 CFR 133.43 - Structures and design.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) Weight and center of gravity— (1) Weight. The total weight of the rotorcraft-load combination must not exceed the total weight approved for the rotorcraft during its type certification. (2) Center of gravity. The location of the center of gravity must, for all loading conditions, be within the range...

14 CFR 133.43 - Structures and design.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) Weight and center of gravity— (1) Weight. The total weight of the rotorcraft-load combination must not exceed the total weight approved for the rotorcraft during its type certification. (2) Center of gravity. The location of the center of gravity must, for all loading conditions, be within the range...

Sire carcass breeding values affect body composition in lambs - 1. Effects on lean weight and its distribution within the carcass as measured by computed tomography.

PubMed

Anderson, F; Williams, A; Pannier, L; Pethick, D W; Gardner, G E

2015-10-01

Data are obtained from computed tomography scanning of 1665 lambs at locations around Australia. Lambs were progeny of Terminal, Maternal and Merino sires with known Australian Sheep Breeding Values for post weaning c-site eye muscle depth (mm; PEMD) and fat depth (mm; PFAT), and post weaning weight (kg; PWWT). Across the 7.8 unit range of sire PEMD, carcass lean weight increased by 7.7%. This lean was distributed to the saddle section (mid-section) where lean became 3.8% heavier, with fore section lean becoming 3.5% lighter. Reducing sire PFAT across its 5.1 unit range increased carcass lean weight by 9.5%, and distributed lean to the saddle section which was 3.7% heavier. Increasing sire PWWT increased lean at some sites in some years, and on average increased saddle lean by 4% across the 24.7 unit PWWT range. Changes in lean weight and distribution due to selection for carcass breeding values will increase carcass value, particularly through increased weight of high value loin cuts. Copyright © 2015. Published by Elsevier Ltd.

Chinese Text Summarization Algorithm Based on Word2vec

NASA Astrophysics Data System (ADS)

Chengzhang, Xu; Dan, Liu

2018-02-01

In order to extract some sentences that can cover the topic of a Chinese article, a Chinese text summarization algorithm based on Word2vec is used in this paper. Words in an article are represented as vectors trained by Word2vec, the weight of each word, the sentence vector and the weight of each sentence are calculated by combining word-sentence relationship with graph-based ranking model. Finally the summary is generated on the basis of the final sentence vector and the final weight of the sentence. The experimental results on real datasets show that the proposed algorithm has a better summarization quality compared with TF-IDF and TextRank.

Stand up time in tunnel base on rock mass rating Bieniawski 1989

NASA Astrophysics Data System (ADS)

Nata, Refky Adi; M. S., Murad

2017-11-01

RMR (Rock Mass Rating), or also known as the geo mechanics classification has been modified and made as the International Standard in determination of rock mass weighting. Rock Mass Rating Classification has been developed by Bieniawski (since 1973, 1976, and 1989). The goals of this research are investigate the class of rocks base on classification rock mass rating Bieniawski 1989, to investigate the long mass of the establishment rocks, and also to investigate the distance of the opening tunnel without a support especially in underground mine. On the research measuring: strength intact rock material, RQD (Rock Quality Designation), spacing of discontinuities, condition of discontinuities, groundwater, and also adjustment for discontinuity orientations. On testing samples in the laboratory for coal obtained strong press UCS of 30.583 MPa. Based on the classification according to Bieniawski has a weight of 4. As for silt stone obtained strong press of 35.749 MPa, gained weight also by 4. From the results of the measurements obtained for coal RQD value average 97.38 %, so it has a weight of 20. While in siltstone RQD value average 90.10 % so it has weight 20 also. On the coal the average distance measured in field is 22.6 cm so as to obtain a weight of 10, while for siltstone has an average is 148 cm, so it has weight = 15. Presistence in the field vary, on coal = 57.28 cm, so it has weight is 6 and persistence on siltstone 47 cm then does it weight to 6. Base on table Rock Mass Rating according to Bieniawski 1989, aperture on coal = 0.41 mm. That is located in the range 0.1-1 mm, so it has weight is 4. Besides that, for the siltstone aperture = 21.43 mm. That is located in the range > 5 mm, so the weight = 0. Roughness condition in coal and siltstone classified into rough so it has weight 5. Infilling condition in coal and siltstone classified into none so it has weight 6. Weathering condition in coal and siltstone classified into highly weathered so it has weight 1. Groundwater condition in coal classified into dripping so it has weight 4. and siltstone classified into completely dry so it has weight 15. Discontinuity orientation in coal parallel axis of the tunnel. The range is 251°-290° so unfavorable. It has weight = -10. In siltstone also discontinuity parallel axis of the tunnel. The range located between 241°-300°. Base on weighting parameters according to Bieniawski 1989, concluded for rocks are there in class II with value is 62, and able to establishment until 6 months. For the distance of the opening tunnel without a support as far as 8 meters.

Obesity: Risk factors, complications, and strategies for sustainable long-term weight management.

PubMed

Fruh, Sharon M

2017-10-01

The aims of this article are to review the effects of obesity on health and well-being and the evidence indicating they can be ameliorated by weight loss, and consider weight-management strategies that may help patients achieve and maintain weight loss. Narrative review based on literature searches of PubMed up to May 2016 with no date limits imposed. Search included terms such as "obesity," "overweight," "weight loss," "comorbidity," "diabetes," cardiovascular," "cancer," "depression," "management," and "intervention." Over one third of U.S. adults have obesity. Obesity is associated with a range of comorbidities, including diabetes, cardiovascular disease, obstructive sleep apnea, and cancer; however, modest weight loss in the 5%-10% range, and above, can significantly improve health-related outcomes. Many individuals struggle to maintain weight loss, although strategies such as realistic goal-setting and increased consultation frequency can greatly improve the success of weight-management programs. Nurse practitioners have key roles in establishing weight-loss targets, providing motivation and support, and implementing weight-loss programs. With their in-depth understanding of the research in the field of obesity and weight management, nurse practitioners are well placed to effect meaningful changes in weight-management strategies deployed in clinical practice. ©2017 American Association of Nurse Practitioners.

Stress does not affect ghrelin secretion in obese and normal weight women.

PubMed

Kiessl, Gundula R R; Laessle, Reinhold G

2017-03-01

Stress has been supposed to increase appetite. The biological basis of this phenomenon may be a stress-induced alteration of the secretion of GUT peptides such as ghrelin. Stress-induced changes in ghrelin secretion could be a biological basis of overeating and a factor contributing to the development of obesity. Aim of the study was to analyze the effect of acute psychosocial stress on ghrelin secretion in obese and normal weight women. We compared pre- and postprandial plasma ghrelin secretion of 42 obese and 43 normal weight women in a randomized crossover design. Ghrelin and cortisol concentrations were measured and ratings of stress were also recorded in response to a psychological stressor (Trier Social Stress Test, TSST). Ghrelin samples were collected in the fasting state one time before participating in the TSST and one time before a control session. After the TSST, respectively, control session participants had a standardized ad libitum meal. 30 and 60 min after the TSST, respectively, control session preprandial ghrelin was measured again. Obese women showed lower pre- and postprandial release of ghrelin than normal weight controls. Moreover, obese women showed inhibited postprandial decrease of ghrelin secretion. Stress did not affect postprandial ghrelin secretion, but inhibited food intake in all subjects. The present data provide further evidence of altered ghrelin release in obesity. Acute stress did not affect postprandial ghrelin secretion, but inhibited food intake in all subjects. Results are discussed with regard to biological and psychological regulation of hunger and satiety in obesity.

The underlying physiological basis of the desert rodent Meriones shawi's survival to prolonged water deprivation: Central vasopressin regulation on peripheral kidney water channels AQPs-2.

PubMed

Elgot, A; El Hiba, O; Belkouch, M; Gamrani, H

2018-02-01

Meriones shawi (M. shawi) is a particular semi-desert rodent known by its resistance to long periods of thirst. The aim of the present investigation is to clarify the underlying mechanisms allowing M. shawi to resist to hard conditions of dehydration. For this reason we used two different approaches: i) a morphometric study, which consists in measuring the effect of dehydration on body and kidneys weights as well as the report kidney weight/body weight, ii) By immunohistochemistry, we proceed to study the effect of dehydration on the immunoreactivity of central vasopressin (AVP) and the kidney aquaporin-2 (AQP-2) which is a channel protein that allows water to permeate across cell membranes. Our results showed both a body mass decrease accompanied by a remarkable kidneys hypertrophy. The immunohistochemical study showed a significant increase of AQP-2 immunoreactivity in the medullar part of Meriones kidneys allowing probably to Meriones a great ability to water retention. Consistently, we demonstrate that the increased AQP-2 expression occurred together with an increase in vasopressin (AVP) expression in both hypothalamic supraoptic (SON) and paraventricular nucleus (PVN), which are a major hub in the osmotic control circuitry. These various changes seen either in body weight and kidneys or at the cellular level might be the basis of peripheral control of body water homeostasis, providing to M. shawia strong resistance against chronic dehydration. Copyright © 2017 Elsevier GmbH. All rights reserved.

Altered reward anticipation: Potential explanation for weight gain in schizophrenia?

PubMed

Grimm, Oliver; Kaiser, Stefan; Plichta, Michael M; Tobler, Philippe N

2017-04-01

Obesity and weight gain are severe complications of mental illness, especially schizophrenia. They result from changes in lifestyle and nutrition, side effects of medication and other, less well-understood factors. Recent studies suggest that obesity and weight gain are linked to psychopathology. Specifically, severe psychopathology is associated with greater weight dysregulation, typically weight gain. However, our knowledge about the neuroscientific basis of weight gain in schizophrenia is currently limited. We propose that altered reward anticipation, which in turn is related to striatal dopaminergic dysregulation, may explain why obesity is more prevalent in individuals with mental illness. We review evidence that reward anticipation and weight change are linked by a core deficit in dopaminergic striatal circuits. Several lines of evidence, running from animal studies to preclinical and clinical studies, suggest that striatal dopaminergic neurotransmission is a major hub for the regulation of eating behavior and that dopamine links eating behavior to other motivated behavior. From this perspective, the present review outlines a unifying perspective on dopaminergic reward anticipation as a theoretical frame to link weight gain, medication effects and psychopathology. We derive important but open empirical questions and present perspectives for new therapeutic concepts. Copyright © 2017 Elsevier Ltd. All rights reserved.

Gemini: A long-range cargo transport

NASA Technical Reports Server (NTRS)

1994-01-01

The proposed Gemini, a long-range cargo transport, is designed as a high capacity, dedicated cargo transporter of 8'x8'x20' inter-modal containers, and long-range design. These requirements will result in a design that is larger than any existing aircraft. Due to the size, a conventional configuration would result in an aircraft unable to operate economically at existing airports. It is necessary to design for a minimum possible empty weight, wingspan, and landing gear track. After considering both a single fuselage biplane and a double fuselage biplane configuration, the design team choose the double fuselage biplane configuration. Both of these configuration choices result in a reduced wing root bending moment and subsequently in substantial savings in the wing weight. An overall decrease in the weight of the airplane, its systems, and fuel will be a direct result of the wing weight savings.

Modeling multivariate time series on manifolds with skew radial basis functions.

PubMed

Jamshidi, Arta A; Kirby, Michael J

2011-01-01

We present an approach for constructing nonlinear empirical mappings from high-dimensional domains to multivariate ranges. We employ radial basis functions and skew radial basis functions for constructing a model using data that are potentially scattered or sparse. The algorithm progresses iteratively, adding a new function at each step to refine the model. The placement of the functions is driven by a statistical hypothesis test that accounts for correlation in the multivariate range variables. The test is applied on training and validation data and reveals nonstatistical or geometric structure when it fails. At each step, the added function is fit to data contained in a spatiotemporally defined local region to determine the parameters--in particular, the scale of the local model. The scale of the function is determined by the zero crossings of the autocorrelation function of the residuals. The model parameters and the number of basis functions are determined automatically from the given data, and there is no need to initialize any ad hoc parameters save for the selection of the skew radial basis functions. Compactly supported skew radial basis functions are employed to improve model accuracy, order, and convergence properties. The extension of the algorithm to higher-dimensional ranges produces reduced-order models by exploiting the existence of correlation in the range variable data. Structure is tested not just in a single time series but between all pairs of time series. We illustrate the new methodologies using several illustrative problems, including modeling data on manifolds and the prediction of chaotic time series.

Quantitative trait loci that control body weight and obesity in an F2 intercross between C57BL/6J and DDD.Cg-Ay mice.

PubMed

Suto, Jun-ichi

2011-07-01

I have developed a congenic mouse strain for the A(y) allele at the agouti locus in an inbred DDD/Sgn strain, DDD.Cg-A(y). DDD.Cg-A(y) females are extremely obese and significantly heavier than B6.Cg-A(y) females. The objectives of this study were to determine the genetic basis of obesity in DDD.Cg-A(y) mice, and to determine whether or not their high body weight was due to the presence of DDD background-specific modifiers. I performed quantitative trait locus (QTL) analyses for body weight and body mass index in two types of F(2) mice [F2 A(y) (F(2) mice carrying the A(y) allele) and F(2) non-A(y) (F2 mice without the A(y) allele)] produced by crossing C57BL/6J females and DDD.Cg-A(y) males. The results of the QTL analysis of F(2) A(y) mice were very similar to those obtained for F(2) non-A(y) mice. It was unlikely that the high body weight of DDD.Cg-A(y) mice was due to the presence of specific modifiers. When both F(2) datasets were merged and analyzed, four significant body weight QTLs were identified on chromosomes 6, 9, and 17 (2 loci) and four significant obesity QTLs were identified on chromosomes 1, 6, 9, and 17. Although the presence of DDD background-specific modifiers was not confirmed, a multifactorial basis of obesity in DDD.Cg-A(y) females was thus revealed.

Cardiovascular effects of intensive lifestyle intervention in type 2 diabetes.

PubMed

Wing, Rena R; Bolin, Paula; Brancati, Frederick L; Bray, George A; Clark, Jeanne M; Coday, Mace; Crow, Richard S; Curtis, Jeffrey M; Egan, Caitlin M; Espeland, Mark A; Evans, Mary; Foreyt, John P; Ghazarian, Siran; Gregg, Edward W; Harrison, Barbara; Hazuda, Helen P; Hill, James O; Horton, Edward S; Hubbard, Van S; Jakicic, John M; Jeffery, Robert W; Johnson, Karen C; Kahn, Steven E; Kitabchi, Abbas E; Knowler, William C; Lewis, Cora E; Maschak-Carey, Barbara J; Montez, Maria G; Murillo, Anne; Nathan, David M; Patricio, Jennifer; Peters, Anne; Pi-Sunyer, Xavier; Pownall, Henry; Reboussin, David; Regensteiner, Judith G; Rickman, Amy D; Ryan, Donna H; Safford, Monika; Wadden, Thomas A; Wagenknecht, Lynne E; West, Delia S; Williamson, David F; Yanovski, Susan Z

2013-07-11

Weight loss is recommended for overweight or obese patients with type 2 diabetes on the basis of short-term studies, but long-term effects on cardiovascular disease remain unknown. We examined whether an intensive lifestyle intervention for weight loss would decrease cardiovascular morbidity and mortality among such patients. In 16 study centers in the United States, we randomly assigned 5145 overweight or obese patients with type 2 diabetes to participate in an intensive lifestyle intervention that promoted weight loss through decreased caloric intake and increased physical activity (intervention group) or to receive diabetes support and education (control group). The primary outcome was a composite of death from cardiovascular causes, nonfatal myocardial infarction, nonfatal stroke, or hospitalization for angina during a maximum follow-up of 13.5 years. The trial was stopped early on the basis of a futility analysis when the median follow-up was 9.6 years. Weight loss was greater in the intervention group than in the control group throughout the study (8.6% vs. 0.7% at 1 year; 6.0% vs. 3.5% at study end). The intensive lifestyle intervention also produced greater reductions in glycated hemoglobin and greater initial improvements in fitness and all cardiovascular risk factors, except for low-density-lipoprotein cholesterol levels. The primary outcome occurred in 403 patients in the intervention group and in 418 in the control group (1.83 and 1.92 events per 100 person-years, respectively; hazard ratio in the intervention group, 0.95; 95% confidence interval, 0.83 to 1.09; P=0.51). An intensive lifestyle intervention focusing on weight loss did not reduce the rate of cardiovascular events in overweight or obese adults with type 2 diabetes. (Funded by the National Institutes of Health and others; Look AHEAD ClinicalTrials.gov number, NCT00017953.).

Mining the preferences of patients for ubiquitous clinic recommendation.

PubMed

Chen, Tin-Chih Toly; Chiu, Min-Chi

2018-03-06

A challenge facing all ubiquitous clinic recommendation systems is that patients often have difficulty articulating their requirements. To overcome this problem, a ubiquitous clinic recommendation mechanism was designed in this study by mining the clinic preferences of patients. Their preferences were defined using the weights in the ubiquitous clinic recommendation mechanism. An integer nonlinear programming problem was solved to tune the values of the weights on a rolling basis. In addition, since it may take a long time to adjust the values of weights to their asymptotic values, the back propagation network (BPN)-response surface method (RSM) method is applied to estimate the asymptotic values of weights. The proposed methodology was tested in a regional study. Experimental results indicated that the ubiquitous clinic recommendation system outperformed several existing methods in improving the successful recommendation rate.

A new class of weight and WA systems of the Kravchenko-Kaiser functions

NASA Astrophysics Data System (ADS)

Kravchenko, V. F.; Pustovoit, V. I.; Churikov, D. V.

2014-05-01

A new class of weight and WA-systems of the Kravchenko-Kaiser functions which showed its efficiency in various physical applications is proposed and substantiated. This publication consists of three parts. In the first the Kravchenko-Kaiser weight functions are constructed on basis of the theory of atomic functions (AFs) and the Kaiser windows for the first time. In the second part new constructions of analytic WA-systems of the Kravchenko-Kaiser functions are costructed. In the third part their applications to problems of weight averaging of the difference frequency signals are considered. The numerical experiment and the physical analysis of the results for concrete physical models confirmed their efficiency. This class of functions can find wide physical applications in problems of digital signal processing, restoration of images, radar, radiometry, radio astronomy, remote sensing, etc.

Can In Utero Exposures Program an Increased Risk for ...

EPA Pesticide Factsheets

In the early 1990's, David Barker and his colleagues studied the relationship between the incidence of coronary heart disease and birth weight in a population of adult men and women in Hertfordshire, England. They found an inverse correlation between the incidence of coronary heart disease and birth weight -the lower the weight at birth, the higher the risk of coronary heart disease in adulthood. Importantly, this was not simply a problem of low birth weight or premature birth, as the inverse relationship was evident among full-term births within a normal birth weight range (i.e., 5-10 pounds). Subsequent studies by this group and others expanded the range of adult diseases inversely correlated with birth weight to include hypertension, diabetes, and obesity. These are components of the metabolic syndrome, and all contribute to increased risk of coronary heart disease. Since that time, a number of studies around the world have corroborated these findings. The

Preoperative weight loss with glucagon-like peptide-1 receptor agonist treatment predicts greater weight loss achieved by the combination of medical weight management and bariatric surgery in patients with type 2 diabetes: A longitudinal analysis.

PubMed

Tang, Tien; Abbott, Sally; le Roux, Carel W; Wilson, Violet; Singhal, Rishi; Bellary, Srikanth; Tahrani, Abd A

2018-03-01

We examined the relationship between weight changes after preoperative glucagon-like peptide-1 receptor agonist (GLP-1RA) treatment and weight changes from the start of medical weight management (MWM) until 12 months after bariatric surgery in patients with type 2 diabetes in a retrospective cohort study. A total of 45 patients (64.4% women, median [interquartile range] age 49 [45-60] years) were included. The median (interquartile range) weight loss from start of MWM until 12 months post-surgery was 17.9% (13.0%-29.3%). GLP-1RA treatment during MWM resulted in 5.0% (1.9%-7.7%) weight loss. Weight loss during GLP-1RA treatment predicted weight loss from the start of MWM until 12 months post-surgery, but not postoperative weight loss after adjustment. The proportion of weight loss from start of MWM to 12 months post-surgery attributed to GLP-1RA treatment was negatively associated with that attributed to surgery, after adjustment. In conclusion, weight change after GLP-1RA treatment predicted the weight loss achieved by a combination of MWM and bariatric surgery, but not weight loss induced by surgery only. Failure to lose weight after GLP-1RA treatment should not be considered a barrier to undergoing bariatric surgery. © 2017 John Wiley & Sons Ltd.

Lead poisoning and trace elements in common eiders Somateria mollissima from Finland

USGS Publications Warehouse

Hollmén, Tuula E.; Franson, J.C.; Poppenga, R.H.; Hario, Martti; Kilpi, Mikael

1998-01-01

We collected carcasses of 52 common eider Somateria mollissima adults and ducklings and blood samples from 11 nesting eider hens in the Gulf of Finland near Helsinki in 1994, 1995 and 1996. Samples of liver tissue were analysed for arsenic, cadmium, chromium, copper, iron, lead, magnesium, manganese, mercury, molybdenum, selenium and zinc. Blood was analysed for lead, mercury and selenium. Most of the 21 adults examined at necropsy were emaciated with empty gizzards, and no ingested shotgun pellets or other metal were found in any of the birds. Three adult females had a combination of lesions and tissue lead residues characteristic of lead poisoning. Two of these birds had acid-fast intranuclear inclusion bodies in renal epithelial cells and high concentrations of lead (73.4 and 73.3 ppm; all liver residues reported on dry weight basis) in their livers. The third was emaciated with a liver lead concentration of 47.9 ppm. An adult male had a liver lead concentration of 81.7 ppm, which is consistent with severe clinical poisoning. Two other adults, one male and one female, had liver lead concentrations of 14.2 and 8.03 ppm, respectively. Lead concentrations in the blood of hens ranged from 0.11 to 0.63 ppm wet weight. Selenium residues of A?60 ppm were found in the livers of five adult males. Selenium concentrations in the blood of hens ranged from 1.18 to 3.39 ppm wet weight. Arsenic concentrations of 27.5-38.5 ppm were detected in the livers of four adult females. Detectable concentrations of selenium, mercury and molybdenum were found more frequently in the livers of adult males arriving on the breeding grounds than in incubating females, while the reverse was true for arsenic, lead and chromium. Mean concentrations of selenium, copper and molybdenum were higher in the livers of arriving males than in the livers of incubating hens, but hens had greater concentrations of iron and magnesium. Concentrations of trace elements were lower in the livers of ducklings than in the livers of adults.

Earth GRAM-99 and Trace Constituents

NASA Technical Reports Server (NTRS)

Justus, C. G.; Duvall, Aleta; Keller, Vernon W.

2004-01-01

Global Reference Atmospheric Model (GRAM-99) is an engineering-level model of Earth's atmosphere. It provides both mean values and perturbations for density, temperature, pressure, and winds, as well as monthly- and geographically-varying trace constituent concentrations. From 0-27 km, GRAM thermodynamics and winds are based on National Oceanic and Atmospheric Administration Global Upper Air Climatic Atlas (GUACA) climatology. Above 120 km, GRAM is based on the NASA Marshall Engineering Thermosphere (MET) model. In the intervening altitude region, GRAM is based on Middle Atmosphere Program (MAP) climatology that also forms the basis of the 1986 COSPAR International Reference Atmosphere (CIRA). Atmospheric composition is represented in GRAM by concentrations of both major and minor species. Above 120 km, MET provides concentration values for N2, O2, Ar, O, He, and H. Below 120 km, species represented also include H2O, O3, N2O, CO, CH4, and CO2. At COSPAR 2002 a comparison was made between GRAM constituents below 120 km and those provided by Naval Research Laboratory (NRL) climatology. No current need to update GRAM constituent climatology in that height range was identified. This report examines GRAM (MET) constituents between 100 and 1000 km altitudes. Discrepancies are noted between GRAM (MET) constituent number densities and mass density or molecular weight. Near 110 km altitude, there is up to about 25% discrepancy between MET number density and mass density (with mass density being valid and number densities requiring adjustment). Near 700 km altitude there is also up to about 25% discrepancy between MET number density and mean molecular weight (with molecular weight requiring adjustment). In neither case are MET mass density estimates invalidated. These discrepancies have been traced to MET subroutines SLV (which affects 90-170 km height range) and SLVH (which affects helium above 440 km altitude). With these discrepancies corrected, results are presented to illustrate GRAM (MET) constituent mole fractions in terms of height-latitude cross sections from 100 to 1000 km altitude, and latitude-longitude 'maps' at 450 km (approximate height of International Space Station). Plans are discussed for an update of MET (and GRAM) to correct these constituent inconsistencies and to incorporate several new thermospheric model features.

Cermet crucible for metallurgical processing

DOEpatents

Boring, C.P.

1995-02-14

A cermet crucible is disclosed for metallurgically processing metals having high melting points comprising a body consisting essentially of a mixture of calcium oxide and erbium metal, the mixture comprising calcium oxide in a range between about 50 and 90% by weight and erbium metal in a range between about 10 and 50% by weight.

Maricopa County Employer Wage Survey, 1988. Arizona Labor Market Information.

ERIC Educational Resources Information Center

Arizona State Dept. of Economic Security, Phoenix.

This document contains fall 1988 data on salary and benefits as provided by Maricopa County, Arizona, employers. A chart with wage data presents weighted hourly wage paid, hourly range, and weighted hourly range for each occupational title. Definitions of terms follow. Then, benchmark summary position descriptions (definitions) of the occupations…

Pima County Employer Wage Survey, 1988. Arizona Labor Market Information.

ERIC Educational Resources Information Center

Arizona State Dept. of Economic Security, Phoenix.

This document contains Fall 1988 data on salary and benefits as provided by Pima County, Arizona, employers. A chart with wage data presents weighted hourly wage paid, hourly range, and weighted hourly range for each occupational title. Definitions of terms follow. Then, benchmark summary position descriptions (definitions) of the occupations are…

Benefits of recent improvements in vehicle fuel economy.

DOT National Transportation Integrated Search

2014-10-01

For the past several years, we have calculated (on a monthly basis) the average, sales-weighted fuel economy of all light-duty vehicles (cars, pickup trucks, vans, and SUVs) sold in : the U.S. The results indicate that, from October 2007 to September...

Applications for reuse of lime sludge from water softening.

DOT National Transportation Integrated Search

2005-07-15

Lime sludge, an inert material mostly composed of calcium carbonate, is the result of : softening hard water for distribution as drinking water. A large city such as Des Moines, : Iowa, produces about 30,700 tons of lime sludge (dry weight basis) ann...

40 CFR 406.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... wet milling industry. For those plants producing modified starches at a rate of at least 15 percent by dry-basis weight of total sweetener and starch products per month for 12 consecutive months, the...

40 CFR 406.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... wet milling industry. For those plants producing modified starches at a rate of at least 15 percent by dry-basis weight of total sweetener and starch products per month for 12 consecutive months, the...

40 CFR 406.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... wet milling industry. For those plants producing modified starches at a rate of at least 15 percent by dry-basis weight of total sweetener and starch products per month for 12 consecutive months, the...

40 CFR 406.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... wet milling industry. For those plants producing modified starches at a rate of at least 15 percent by dry-basis weight of total sweetener and starch products per month for 12 consecutive months, the...

40 CFR 406.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... wet milling industry. For those plants producing modified starches at a rate of at least 15 percent by dry-basis weight of total sweetener and starch products per month for 12 consecutive months, the...

7 CFR 993.54 - Establishment of salable and reserve percentages.

Code of Federal Regulations, 2012 CFR

2012-01-01

... MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE DRIED PRUNES PRODUCED IN CALIFORNIA Order Regulating Handling Reserve Control § 993.54 Establishment of... that diverted tonnage (dried weight natural condition prune basis) on diversion certificates issued...