Instrumented impact and residual tensile strength testing of eight-ply carbon eopoxy specimens

NASA Technical Reports Server (NTRS)

Nettles, A. T.

1990-01-01

Instrumented drop weight impact testing was utilized to examine a puncture-type impact on thin carbon-epoxy coupons. Four different material systems with various eight-ply lay-up configurations were tested. Specimens were placed over a 10.3-mm diameter hole and impacted with a smaller tup (4.2-mm diameter) than those used in previous studies. Force-time plots as well as data on absorbed energy and residual tensile strength were gathered and examined. It was found that a critical impact energy level existed for each material tested, at which point tensile strength began to rapidly decrease with increasing impact energy.

Oxygen Compatibility Testing of Composite Materials

NASA Technical Reports Server (NTRS)

Graf, Neil A.; Hudgins, Richard J.; McBain, Michael

2000-01-01

The development of polymer composite liquid oxygen LO2 tanks is a critical step in creating the next generation of launch vehicles. Future launch vehicles need to minimize the gross liftoff weight (GLOW), which is possible due to the 25%-40% reduction in weight that composite materials could provide over current aluminum technology. Although a composite LO2 tank makes these weight savings feasible, composite materials have not historically been viewed as "LO2 compatible." To be considered LO2 compatible, materials must be selected that will resist any type of detrimental, combustible reaction when exposed to usage environments. This is traditionally evaluated using a standard set of tests. However, materials that do not pass the standard tests can be shown to be safe for a particular application. This paper documents the approach and results of a joint NASA/Lockheed Martin program to select and verify LO2 compatible composite materials for liquid oxygen fuel tanks. The test approach developed included tests such as mechanical impact, particle impact, puncture, electrostatic discharge, friction, and pyrotechnic shock. These tests showed that composite liquid oxygen tanks are indeed feasible for future launch vehicles.

A Study on the Mechanical Properties and Impact-Induced Initiation Characteristics of Brittle PTFE/Al/W Reactive Materials.

PubMed

Ge, Chao; Maimaitituersun, Wubuliaisan; Dong, Yongxiang; Tian, Chao

2017-04-26

Polytetrafluoroethylene/aluminum/tungsten (PTFE/Al/W) reactive materials of three different component mass ratios (73.5/26.5/0, 68.8/24.2/7 and 63.6/22.4/14) were studied in this research. Different from the PTFE/Al/W composites published elsewhere, the materials in our research were fabricated under a much lower sintering temperature and for a much shorter duration to achieve a brittle property, which aims to provide more sufficient energy release upon impact. Quasi-static compression tests, dynamic compression tests at room and elevated temperatures, and drop weight tests were conducted to evaluate the mechanical and impact-induced initiation characteristics of the materials. The materials before and after compression tests were observed by a scanning electron microscope to relate the mesoscale structural characteristics to their macro properties. All the three types of materials fail at very low strains during both quasi-static and dynamic compression. The stress-strain curves for quasi-static tests show obvious deviations while that for the dynamic tests consist of only linear-elastic and failure stages typically. The materials were also found to exhibit thermal softening at elevated temperatures and were strain-rate sensitive during dynamic tests, which were compared using dynamic increase factors (DIFs). Drop-weight test results show that the impact-initiation sensitivity increases with the increase of W content due to the brittle mechanical property. The high-speed video sequences and recovered sample residues of the drop-weight tests show that the reaction is initiated at two opposite positions near the edges of the samples, where the shear force concentrates the most intensively, indicating a shear-induced initiation mechanism.

A Study on the Mechanical Properties and Impact-Induced Initiation Characteristics of Brittle PTFE/Al/W Reactive Materials

PubMed Central

Ge, Chao; Maimaitituersun, Wubuliaisan; Dong, Yongxiang; Tian, Chao

2017-01-01

Polytetrafluoroethylene/aluminum/tungsten (PTFE/Al/W) reactive materials of three different component mass ratios (73.5/26.5/0, 68.8/24.2/7 and 63.6/22.4/14) were studied in this research. Different from the PTFE/Al/W composites published elsewhere, the materials in our research were fabricated under a much lower sintering temperature and for a much shorter duration to achieve a brittle property, which aims to provide more sufficient energy release upon impact. Quasi-static compression tests, dynamic compression tests at room and elevated temperatures, and drop weight tests were conducted to evaluate the mechanical and impact-induced initiation characteristics of the materials. The materials before and after compression tests were observed by a scanning electron microscope to relate the mesoscale structural characteristics to their macro properties. All the three types of materials fail at very low strains during both quasi-static and dynamic compression. The stress-strain curves for quasi-static tests show obvious deviations while that for the dynamic tests consist of only linear-elastic and failure stages typically. The materials were also found to exhibit thermal softening at elevated temperatures and were strain-rate sensitive during dynamic tests, which were compared using dynamic increase factors (DIFs). Drop-weight test results show that the impact-initiation sensitivity increases with the increase of W content due to the brittle mechanical property. The high-speed video sequences and recovered sample residues of the drop-weight tests show that the reaction is initiated at two opposite positions near the edges of the samples, where the shear force concentrates the most intensively, indicating a shear-induced initiation mechanism. PMID:28772812

Comparison of impact results for several polymeric composites over a wide range of low impact velocities

NASA Technical Reports Server (NTRS)

Poe, C. C., Jr.; Portanova, M. A.; Masters, J. E.; Sankar, B. V.; Jackson, Wade C.

1991-01-01

Static indentation, falling weight, and ballistic impact tests were conducted in clamped plates made of AS4/3501-6 and IM7/8551-7 prepreg tape. The transversely isotropic plates were nominally 7-mm thick. Pendulum and ballistic tests were also conducted on simply supported plates braided with Celion 12000 fibers and 3501-6 epoxy. The 20 degree braided plates were about 5-mm thick. The impactors had spherical or hemispherical shapes with a 12.7 mm diameter. Residual compression strength and damage size were measured. For a given kinetic energy, damage size was least for IM7/8551-7 and greatest for the braided material. Strengths varied inversely with damage size. For a given damage size, strength loss as a fraction of original strength was least for the braided material and greatest for AS4/3501-6 and IM7/8551-7. Strength loss for IM7/8551-7 and AS4/3501-6 was nearly equal. No significant differences were noticed between damage sizes and residual compression strengths for the static indentation, falling weight, and ballistic tests of AS4/3501-6 and IM7/8551-7. For the braided material, sizes of damage were significantly less and compression strengths were significantly more for the falling weight tests than for the ballistic tests.

Improved cognitive functioning in obese adolescents after a 30-week inpatient weight loss program.

PubMed

Vantieghem, Stijn; Bautmans, Ivan; Guchtenaere, Ann De; Tanghe, Ann; Provyn, Steven

2018-06-15

Studies linked obesity with a large number of medical conditions including decreased cognitive functioning. The relation between BMI and cognition was proven in adults, but in adolescents the results are conflicting. Further, limited data are available on the impact of weight loss on cognition. This study analyzed the impact of a 30-week lasting weight loss program on cognition and determined the impact of changes in body composition and self-perceived fatigue on changes in cognition. Sixty-two obese adolescents were evaluated at baseline and after 30 weeks. Stroop test (ST; selective attention), Continuous Performance Test (CPT; sustained attention) and Ray Auditory verbal learning test (RAVLT; short-term memory) were assessed. Additionally, body composition parameters and fatigue (MFI-20) were evaluated. Improved reaction times were found for ST and CPT after the intervention, but were independent for reductions in BMI, fat mass, fat%, and fatigue. Short memory also improved with decreased fatigue as an influencing parameter. Accuracy of ST and CPT showed no significant changes. A 30-week lasting inpatient weight loss program improved selective attention, sustained attention, and short-term memory. Changes in body composition did not explain the improvements in cognitive functioning. Decreased fatigue resulted in improved aspects of cognition.

Damage Characteristics and Residual Strength of Composite Sandwich Panels Impacted with and Without Compression Loading

NASA Technical Reports Server (NTRS)

McGowan, David M.; Ambur, Damodar R.

1998-01-01

The results of an experimental study of the impact damage characteristics and residual strength of composite sandwich panels impacted with and without a compression loading are presented. Results of impact damage screening tests conducted to identify the impact-energy levels at which damage initiates and at which barely visible impact damage occurs in the impacted facesheet are discussed. Parametric effects studied in these tests include the impactor diameter, dropped-weight versus airgun-launched impactors, and the effect of the location of the impact site with respect to the panel boundaries. Residual strength results of panels tested in compression after impact are presented and compared with results of panels that are subjected to a compressive preload prior to being impacted.

Instrumented impact testing of kenaf fiber reinforced polypropylene composites: effects of temperature and composition

Treesearch

Craig Merrill Clemons; Anand R. Sanadi

2007-01-01

An instrumented Izod test was used to investigate the effects of fiber content, coupling agent, and temperature on the impact performance of kenaf fiber reinforced polypropylene (PP). Composites containing 0-60% (by weight) kenaf fiber and 0 or 2% maleated polypropylene (MAPP) and PP/wood flour composites were tested at room temperature and between -50 °C and +...

Effects of Constituents and Lay-up Configuration on Drop-Weight Tests of Fiber-Metal Laminates

NASA Astrophysics Data System (ADS)

Liu, Yanxiong; Liaw, Benjamin

2010-02-01

Impact responses and damage of various fiber-metal laminates were studied using a drop-weight instrument with the post-impact damage characteristics being evaluated through ultrasonic and mechanical sectioning techniques. The first severe failure induced by the low-velocity drop-weight impact occurred as delamination between the aluminum and fiber-epoxy layers at the non-impact side. It was followed by a visible shear crack in the outer aluminum layer on the non-impact face. Through-thickness shear cracks in the aluminum sheets and severe damage in the fiber laminated layers (including delamination between adjacent fiber-epoxy laminae with different fiber orientations) developed under higher energy impacts. The impact properties of fiber-metal laminates varied with different constituent materials and fiber orientations. Since it was punched through easily, the aramid-fiber reinforced fiber-metal laminates (ARALL) offered poorer impact resistance than the glass-fiber reinforced fiber-metal laminates (GLARE). Tougher and more ductile aluminum alloys improved the impact resistance. GLARE made of cross-ply prepregs provided better impact resistance than GLARE with unidirectional plies.

Dynamic Crushing Response of Closed-cell Aluminium Foam at Variable Strain Rates

NASA Astrophysics Data System (ADS)

Islam, M. A.; Kader, M. A.; Escobedo, J. P.; Hazell, P. J.; Appleby-Thomas, G. J.; Quadir, M. Z.

2015-06-01

The impact response of aluminium foams is essential for assessing their crashworthiness and energy absorption capacity for potential applications. The dynamic compactions of closed-cell aluminium foams (CYMAT) have been tested at variable strain rates. Microstructural characterization has also been carried out. The low strain rate impact test has been carried out using drop weight experiments while the high strain compaction test has been carried out via plate impact experiments. The post impacted samples have been examined using optical and electron microscopy to observe the microstructural changes during dynamic loading. This combination of dynamic deformation during impact and post impact microstructural analysis helped to evaluate the pore collapse mechanism and impact energy absorption characteristics.

Enhancing Injury Protection Capabilities of Army Combat Helmets

DTIC Science & Technology

2006-11-01

rate on each material’s energy attenuation characteristics, dynamic compression tests were conducted using a monorail drop tower conforming to ANSI...equipment. An Army combat helmet is fitted to the monorail drop tower (left). The variable weight, flat impactor (right) is fitted to the monorail ...3.3.1 Impact attenuation All impact tests were conducted using the USAARL vertical monorail drop tower (Figure 1, left). Impact sites along with

Effects of microstructure on inverse fracture occurring during drop-weight tear testing of high-toughness X70 pipeline steels

NASA Astrophysics Data System (ADS)

Hwang, Byoungchul; Kim, Yang Gon; Lee, Sunghak; Kim, Nack J.; Yoo, Jang Yong

2005-02-01

The effects of microstructure on inverse fracture occurring in the hammer-impacted region were analyzed after conducting a drop-weight tear test (DWTT) on high-toughness pipeline steels. Three kinds of steels were fabricated by varying the alloying elements, and their microstructures were varied by the rolling conditions. The pressed-notch (PN) or chevron-notch (CN) DWTT and Charpy V-notch (CVN) impact tests were conducted on the rolled steel specimens, and the results were discussed in comparison with the data obtained from CVN tests of prestrained specimens. In the hammer-impacted region of the DWTT specimens, abnormal inverse fracture having a cleavage fracture mode appeared, and the inverse fracture area correlated well with the upper-shelf energy (USE) obtained from the CVN test and with the grain size. The steel specimens having a higher USE or having coarse polygonal ferrite tended to have a larger inverse fracture area than those having a lower USE or having fine acicular ferrite. This was because steels having a higher impact absorption energy required higher energy for fracture initiation and propagation during the DWTT. These results were confirmed by the CVN data of prestrained steel specimens.

Neuropsychological development in preschool children born with asymmetrical intrauterine growth restriction and impact of postnatal head growth.

PubMed

Klaric, Andrea Simić; Galić, Slavka; Kolundzić, Zdravko; Bosnjak, Vlatka Mejaski

2013-07-01

Neuropsychological development and the impact of postnatal head growth were studied in preschool children with asymmetrical intrauterine growth restriction. Examinees born at term with a birth weight below the 10th percentile were matched to the control group according to chronological and gestational age, gender, and maternal education. Fifty children were in each group, with a mean age of 6 years, 4 months. The Touwen neurological examination, the Čuturić developmental test, an imitative hand positions test, and a visual attention test were performed. There were significant differences (P< .03) in motor variables, the developmental quotient, and the imitative hand positions test. Fine motor skills had the most discriminative power. Relative growth of the head in relation to weight gain was positively correlated to neurocognitive outcome. Intrauterine growth-restricted children with a current head circumference ≤10th percentile had poorer outcomes. Conclusively, intrauterine growth restriction has a negative impact on neurocognitive development. Slow postnatal head growth is correlated with a poorer neuropsychological outcome.

Low velocity instrumented impact testing of four new damage tolerant carbon/epoxy composite systems

NASA Technical Reports Server (NTRS)

Lance, D. G.; Nettles, A. T.

1990-01-01

Low velocity drop weight instrumented impact testing was utilized to examine the damage resistance of four recently developed carbon fiber/epoxy resin systems. A fifth material, T300/934, for which a large data base exists, was also tested for comparison purposes. A 16-ply quasi-isotropic lay-up configuration was used for all the specimens. Force/absorbed energy-time plots were generated for each impact test. The specimens were cross-sectionally analyzed to record the damage corresponding to each impact energy level. Maximum force of impact versus impact energy plots were constructed to compare the various systems for impact damage resistance. Results show that the four new damage tolerant fiber/resin systems far outclassed the T300/934 material. The most damage tolerant material tested was the IM7/1962 fiber/resin system.

Composite transport wing technology development: Design development tests and advanced structural concepts

NASA Technical Reports Server (NTRS)

Griffin, Charles F.; Harvill, William E.

1988-01-01

Numerous design concepts, materials, and manufacturing methods were investigated for the covers and spars of a transport box wing. Cover panels and spar segments were fabricated and tested to verify the structural integrity of design concepts and fabrication techniques. Compression tests on stiffened panels demonstrated the ability of graphite/epoxy wing upper cover designs to achieve a 35 percent weight savings compared to the aluminum baseline. The impact damage tolerance of the designs and materials used for these panels limits the allowable compression strain and therefore the maximum achievable weight savings. Bending and shear tests on various spar designs verified an average weight savings of 37 percent compared to the aluminum baseline. Impact damage to spar webs did not significantly degrade structural performance. Predictions of spar web shear instability correlated well with measured performance. The structural integrity of spars manufactured by filament winding equalled or exceeded those fabricated by hand lay-up. The information obtained will be applied to the design, fabrication, and test of a full-scale section of a wing box. When completed, the tests on the technology integration box beam will demonstrate the structural integrity of an advanced composite wing design which is 25 percent lighter than the metal baseline.

Impact of changes in weight, fat depth, and loin muscle depth on carcass yield and value and implications for selection and pricing of rams from terminal-sire sheep breeds

USDA-ARS?s Scientific Manuscript database

Breeding objectives and selection indexes are necessary to support comprehensive genetic improvement programs. This study used off-test body weights (OTBW) or chilled carcass weights (CCW), ultrasonic measurements of fat depth (USFD, mm), and predicted ultrasound loin muscle depths (USLMD, mm) from ...

49 CFR 173.57 - Acceptance criteria for new explosives.

Code of Federal Regulations, 2010 CFR

2010-10-01

... must be subjected to the Drop Weight Impact Sensitivity Test (Test Method 3(a)(i)), the Friction... substance has a friction sensitiveness equal to or greater than that of dry pentaerythrite tetranitrate (PETN) when tested in the Friction Sensitivity Test; (4) The substance fails to pass the test criteria...

A cost effectiveness analysis of thiopurine methyltransferase testing for guiding 6-mercaptopurine dosing in children with acute lymphoblastic leukemia.

PubMed

Donnan, Jennifer R; Ungar, Wendy J; Mathews, Maria; Hancock-Howard, Rebecca L; Rahman, Proton

2011-08-01

An increased understanding of the genetic basis of disease creates a demand for personalized medicine and more genetic testing for diagnosis and treatment. The objective was to assess the incremental cost-effectiveness per life-month gained of thiopurine methyltransferase (TPMT) genotyping to guide doses of 6-mercaptopurine (6-MP) in children with acute lymphoblastic leukemia (ALL) compared to enzymatic testing and standard weight-based dosing. A cost-effectiveness analysis was conducted from a health care system perspective comparing costs and consequences over 3 months. Decision analysis was used to evaluate the impact of TPMT tests on preventing myelosuppression and improving survival in ALL patients receiving 6-MP. Direct medical costs included laboratory tests, medications, physician services, pharmacy and inpatient care. Probabilities were derived from published evidence. Survival was measured in life-months. The robustness of the results to variable uncertainty was tested in one-way sensitivity analyses. Probabilistic sensitivity analysis examined the impact of parameter uncertainty and generated confidence intervals around point estimates. Neither of the testing interventions showed a benefit in survival compared to weight-based dosing. Both test strategies were more costly compared to weight-based dosing. Incremental costs per child (95% confidence interval) were $277 ($112, $442) and $298 ($392, $421) for the genotyping and phenotyping strategies, respectively, compared to weight-based dosing. The present analysis suggests that screening for TPMT mutations using either genotype or enzymatic laboratory tests prior to the administration of 6-MP in pediatric ALL patients is not cost-effective. Copyright © 2011 Wiley-Liss, Inc.

Comparison of V50 Shot Placement on Final Outcome

DTIC Science & Technology

2014-11-01

molecular- weight polyethylene (UHMWPE). In V50 testing of those types of materials, large delaminations may occur that influence the results. This...placement, a proper evaluation of materials may not be possible. 15. SUBJECT TERMS ballistics, V50 test, logistic regression , statistical inference...from an impact. While this may work with ceramics or metal armor, it is inappropriate for use on composite armors like ultra-high-molecular- weight

Comparison of impact strength of acrylic resin reinforced with kevlar and polyethylene fibres.

PubMed

Kamath, G; Bhargava, K

2002-01-01

The present study was done to evaluate the impact strengths of heat-activated acrylic resins reinforced with Kevlar fibres, polyethylene fibres and unreinforced heat activated acrylic resin. Each of three groups had 25 specimens. Brass rods of uniform length of 40 mm and diameter of 8 mm were used to prepare the moulds. A combination of long fibres (40 mm length) and short fibres (6 mm length) were used. The total amount of fibres incorporated was limited to 2% by weight of the resin matrix. Short and long fibres of equal weight were incorporated. The short fibres were mixed with polymer and monomer and packed into the mould, while, the long axis of the specimen, perpendicular to the applied force. The specimens were then processed. Impact strength testing was done on Hounsfield's impact testing machine. Kevlar fibre reinforced heat activated acrylic resin specimens recorded higher mean impact strength of 0.8464 Joules, while polyethylene fibres reinforced heat activated acrylic resin recorded mean impact strength of 0.7596 joules. The unreinforced heat activated acrylic resin recorded mean impact strength of 0.3440 Joules.

Impact Testing of Explosives and Propellants

DTIC Science & Technology

1992-06-01

in order to better understand the test results. The physical behavior of tile drop weight impact test can be modeled on a computer with all of the...SPRING ELEMENTS OF SIMPLIFIED IMPACT MACHINE A-4 NSV’CDDITR-92/280 4 j DISTRIBUTION Copies C~e ATTN ONR 1132P (R MILLER ) 1 ATTN 6-A-145 1 ONT2OT(L V...LIBRARY OF CONGRESS (J W FORBES) 1 WASHINGTON DC 20540 (R11 GUIRGUIS ) 1 (P K GUSTAVSON) I INTERNAL DISTRIBUTION (R N HAY) ! E231 2 (It D JONES) 1 E232 3 (K

Low velocity impact of 6082-T6 aluminum plates

NASA Astrophysics Data System (ADS)

Mocian, Oana Alexandra; Constantinescu, Dan Mihai; Sandu, Marin; Sorohan, Ştefan

2018-02-01

The low velocity domain covers vehicle impacts, ship collisions and even accidentally tool drops. Even though more and more research is needed into these fields, most of the papers concerning impact problems focus on impact at medium and high velocities. Understanding the behavior of structures subjected to low velocity impact is of major importance when referring to impact resistance and damage tolerance. The paper presents an experimental and numerical investigation on the low velocity behavior of 6082-T6 aluminum plates. Impact tests were performed using an Instron Ceast 9340 drop-weight testing machine. In the experimental procedure, square plates were mounted on a circular support, fixed with a pneumatic clamping system and impacted with a hemispherical steel projectile. Specimens were impacted at constant weight and different impact velocities. The effect of different impact energies was investigated. The impact event was then simulated using the nonlinear finite element code LS_DYNA in order to determine the effect of strain rate upon the mechanical behavior of the aluminum plates. Moreover, in order to capture the exact behavior of the material, a special attention has been given to the selection of the correct material model and its parameters, which, in large extent, depend on the observed behavior of the aluminum plate during the test and the actual response of the plate under simulation. The numerical predictions are compared with the experimental observations and the applicability of the numerical model for further researches is analyzed.

Weight-related abuse: Perceived emotional impact and the effect on disordered eating.

PubMed

Salwen, Jessica K; Hymowitz, Genna F; Bannon, Sarah M; O'Leary, K Daniel

2015-07-01

The purpose of this article was to evaluate theories that (1) weight-related abuse (WRA) plays a unique role in the development of disordered eating, above and beyond general childhood verbal abuse and weight-related teasing, and (2) the perceived emotional impact of WRA mediates the relationship between WRA and current disordered eating. Self-report questionnaires on childhood trauma, weight-related teasing, WRA, and current eating behaviors were administered to a total of 383 undergraduate students. In initial regressions, WRA significantly predicted binge eating, emotional eating, night eating, and unhealthy weight control. WRA continued to significantly predict all 4 forms of disordered eating following the introduction of measures of weight-related teasing and childhood verbal abuse into the regression. Latent variable analysis confirmed that perceived emotional impact of WRA mediated the relationship between WRA and disordered eating, and tests for indirect effects yielded a significant indirect effect of WRA on disordered eating through perceived emotional impact. In sum, WRA is a unique construct and the content of childhood or adolescent maltreatment is important in determining eventual psychopathology outcomes. These findings support the necessity of incorporating information on developmental history and cognitive factors into assessment and treatment of individuals with disordered eating. Copyright © 2015 Elsevier Ltd. All rights reserved.

Sensor set-up for wireless measurement of automotive rim and wheel parameters in laboratory conditions

NASA Astrophysics Data System (ADS)

Borecki, M.; Prus, P.; Korwin-Pawlowski, M. L.; Rychlik, A.; Kozubel, W.

2017-08-01

Modern rims and wheels are tested at the design and production stages. Tests can be performed in laboratory conditions and on the ride. In the laboratory, complex and costly equipment is used, as for example wheel balancers and impact testers. Modern wheel balancers are equipped with electronic and electro-mechanical units that enable touch-less measurement of dimensions, including precision measurement of radial and lateral wheel run-out, automatic positioning and application of the counterweights, and vehicle wheel set monitoring - tread wear, drift angles and run-out unbalance. Those tests are performed by on-wheel axis measurements with laser distance meters. The impact tester enables dropping of weights from a defined height onto a wheel. Test criteria are the loss of pressure of the tire and generation of cracks in the wheel without direct impact of the falling weights. In the present paper, a set up composed of three accelerometers, a temperature sensor and a pressure sensor is examined as the base of a wheel tester. The sensor set-up configuration, on-line diagnostic and signal transmission are discussed.

Effects of obesity on weight-bearing versus weight-supported exercise testing in patients with COPD.

PubMed

Maatman, Robbert C; Spruit, Martijn A; van Melick, Paula P; Peeters, Jos P I; Rutten, Erica P A; Vanfleteren, Lowie E G W; Wouters, Emiel F M; Franssen, Frits M E

2016-04-01

Obesity is associated with increased dyspnoea and reduced health status in patients with chronic obstructive pulmonary disease (COPD). Studies on the effects of obesity on exercise capacity showed divergent results. The objective of this study is to investigate the impact of obesity on weight-bearing versus weight-supported exercise tolerance in obese and normal weight patients, matched for age, gender and degree of airflow limitation. Retrospective analyses of data obtained during pre-pulmonary rehabilitation assessment in 108 obese COPD patients (OB) (age: 61.2 ± 5.3y, FEV1 : 43.2 ± 7.4%, BMI: 34.1 ± 3.9 kg/m(2) ,) and 108 age and FEV1 -matched normal weight COPD patients (NW) (age: 61.7 ± 3.6y, FEV1 : 41.5 ± 8.4%, BMI: 22.9 ± 1.2 kg/m(2) ,). Cardiopulmonary exercise test (CPET) and 6 min walk test (6MWT) were performed, Borg scores for dyspnoea and leg fatigue were recorded, before and after the tests. Six-minute walk distance differed between OB (398 ± 107 m) and NW patients (446 ± 109 m, P < 0.05), while peak cycling exercise load was comparable (OB: 75 ± 29 W, NW: 70 ± 25 W, ns). Dyspnoea (OB 3.2 ± 2.0 vs NW 3.1 ± 1.7, ns) and leg fatigue (OB 2.4 ± 2.3 vs NW 1.9 ± 1.7, ns) were not significantly different in OB compared with NW after 6MWT, or after CPET (dyspnoea: OB 5.1 ± 2.4 vs NW 5.4 ± 2.2, ns; leg fatigue: OB 4.0 ± 2.3 vs NW 4.0 ± 2.7, ns). In contrast to weight-supported exercise, obesity has a negative impact on weight-bearing exercise capacity, despite comparable exercise-related symptoms. The results of this study enhance the understanding of the impact of obesity on physical performance in COPD. © 2015 Asian Pacific Society of Respirology.

Modeling the low-velocity impact characteristics of woven glass epoxy composite laminates using artificial neural networks

NASA Astrophysics Data System (ADS)

Mathivanan, N. Rajesh; Mouli, Chandra

2012-12-01

In this work, a new methodology based on artificial neural networks (ANN) has been developed to study the low-velocity impact characteristics of woven glass epoxy laminates of EP3 grade. To train and test the networks, multiple impact cases have been generated using statistical analysis of variance (ANOVA). Experimental tests were performed using an instrumented falling-weight impact-testing machine. Different impact velocities and impact energies on different thicknesses of laminates were considered as the input parameters of the ANN model. This model is a feed-forward back-propagation neural network. Using the input/output data of the experiments, the model was trained and tested. Further, the effects of the low-velocity impact response of the laminates at different energy levels were investigated by studying the cause-effect relationship among the influential factors using response surface methodology. The most significant parameter is determined from the other input variables through ANOVA.

30 CFR 18.66 - Tests of windows and lenses.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Tests of windows and lenses. 18.66 Section 18... Tests § 18.66 Tests of windows and lenses. (a) Impact tests. A 4-pound cylindrical weight with a 1-inch-diameter hemispherical striking surface shall be dropped (free fall) to strike the window or lens in its...

Prediction of the effect of temperature on impact damage in carbon/epoxy laminates

NASA Astrophysics Data System (ADS)

Gómez del Río, T.; Zaera, R.; Navarro, C.

2003-09-01

The effect of temperature on impact damage in Carbon Fiber Reinforced Plastic (CFRP) tape laminates produced by low velocity impact was studied by numerical simulations made to model drop weight tower impact tests on carbon/epoxy laminate composites. The damage model was implemented into a user subroutine of the finite element code ABAQUS. The model takes into account the thermal stresses resulting form the different thermal expansion coefficients in each ply of the laminate. The tests and simulations show how temperature affects the propagation of each damage mode. Matrix cracking and delamination are greatly affected by low temperature, white matrix crushing and fibre failure appear only in a small region at all the impact energies and test temperatures.

Progress report 3 of cooperative program for design, fabrication, and testing of high modulus composite helicopter shafting

NASA Technical Reports Server (NTRS)

Wright, C. C.; Baker, D. J.

1980-01-01

This report describes the third phase of work, the objective of which was to overcome the excessive brittleness of the previously developed UH-1 helicopter tail rotor drive shaft design which demonstrated a shaft train weight savings of 53.1% over the current 2024-T3 aluminum shaft train. A materials impact program demonstrated exceptionally noteworthy performance of two woven constructions containing E-glass and PRD 49-III (designation later changed to KEVLAR 49) fibers in an epoxy resin matrix. Thermoplastic matrices and PRD 49-III fiber provided impact resistance at low weight which was superior to composites having the same fiber in a thermoset resin matrix. A design, fabrication, and test program showed that shaft impact resistance could be improved over the previously developed graphite composite design at a cost in shaft train rate savings. The shaft train weight savings of the most impact tolerant construction was 4.0% over the current aluminum shaft train. Alternating plies of graphite and glass appear to provide substantially greater tube impact durability than that provided by hybridization of the two fibers into one tape wound to a ply design equivalent in strength and stiffness to that of the alternating ply design. Recommendations were made to continue research work to exploit the potential for more impact-durable structures through the use of KEVLAR 49 fiber, woven structures, thermoplastic matrices and THORNEL 50-S/KEVLAR 49 blends with thermoset matrices.

Relationship between accident severity and full-scale crash test. Volume II, Appendices

DOT National Transportation Integrated Search

1984-08-01

Available accident files are used to generate a 4l2-accident data base of guardrail impacts. This base is analyzed to develop a statistical model for predicting accident severity index (ASI) as a function of vehicle type or weight, impact speed, and ...

THRESHOLD STUDIES ON TNT, COMPOSITION B, C-4, AND ANFO EXPLOSIVES USING THE STEVEN IMPACT TEST

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vandersall, K S; Switzer, L L; Garcia, F

2006-06-20

Steven Impact Tests were performed at low velocity on the explosives TNT (trinitrotolulene), Composition B (63% RDX, 36% TNT, and 1% wax by weight), C-4 (91% RDX, 5.3% Di (2-ethylhexyl) sebacate, 2.1% Polyisobutylene, and 1.6% motor oil by weight) and ANFO (94% ammonium Nitrate with 6% Fuel Oil) in attempts to obtain a threshold for reaction. A 76 mm helium driven gas gun was used to accelerate the Steven Test projectiles up to approximately 200 m/s in attempts to react (ignite) the explosive samples. Blast overpressure gauges, acoustic microphones, standard video and high-speed photography were used to characterize the levelmore » of any high explosive reaction violence. No bulk reactions were observed in the TNT, Composition B, C-4 or ANFO explosive samples impacted up to velocities in the range of 190-200 m/s. This work will outline the experimental details and discuss the lack of reaction when compared to the reaction thresholds of other common explosives. These results will also be compared to that of the Susan Test and reaction thresholds observed in the common small-scale safety tests such as the drop hammer and friction tests in hopes of drawing a correlation.« less

Effect of Reinforcement Using Stainless Steel Mesh, Glass Fibers, and Polyethylene on the Impact Strength of Heat Cure Denture Base Resin - An In Vitro Study.

PubMed

Murthy, H B Mallikarjuna; Shaik, Sharaz; Sachdeva, Harleen; Khare, Sumit; Haralur, Satheesh B; Roopa, K T

2015-06-01

The impact strength of denture base resin is of great concern and many approaches have been made to strengthen acrylic resin dentures. The objective of this study was to compare the impact strength of the denture base resin with and without reinforcement and to evaluate the impact strength of denture base resin when reinforced with stainless steel mesh, glass fiber, and polyethylene fibers in the woven form. The specimens (maxillary denture bases) were fabricated using a standard polyvinylsiloxane mold with conventional heat cured polymethyl methacrylate resin. The specimens were divided into four groups (n = 10). Group I specimens or control group were not reinforced. Group II specimens were reinforced with stainless steel mesh and Group III and Group IV specimens were reinforced with three percent by weight of glass fibers and polyethylene fibers in weave form respectively. All the specimens were immersed in water for 1-week before testing. The impact strength was measured with falling weight impact testing machine. One-way analysis of variance and Tukey's post-hoc test were used for statistical analysis. Highest impact strength values were exhibited by the specimens reinforced with polyethylene fibers followed by glass fibers, stainless steel mesh, and control group. Reinforcement of maxillary complete dentures showed a significant increase in impact strength when compared to unreinforced dentures. Polyethylene fibers exhibit better impact strength followed by glass fibers and stainless steel mesh. By using pre-impregnated glass and polyethylene fibers in woven form (prepregs) the impact strength of the denture bases can be increased effectively.

A virtual test system representing the distribution of pedestrian impact configurations for future vehicle front-end optimization.

PubMed

Li, Guibing; Yang, Jikuang; Simms, Ciaran

2016-07-03

The purpose of this study is to define a computationally efficient virtual test system (VTS) to assess the aggressivity of vehicle front-end designs to pedestrians considering the distribution of pedestrian impact configurations for future vehicle front-end optimization. The VTS should represent real-world impact configurations in terms of the distribution of vehicle impact speeds, pedestrian walking speeds, pedestrian gait, and pedestrian height. The distribution of injuries as a function of body region, vehicle impact speed, and pedestrian size produced using this VTS should match the distribution of injuries observed in the accident data. The VTS should have the predictive ability to distinguish the aggressivity of different vehicle front-end designs to pedestrians. The proposed VTS includes 2 parts: a simulation test sample (STS) and an injury weighting system (IWS). The STS was defined based on MADYMO multibody vehicle to pedestrian impact simulations accounting for the range of vehicle impact speeds, pedestrian heights, pedestrian gait, and walking speed to represent real world impact configurations using the Pedestrian Crash Data Study (PCDS) and anthropometric data. In total 1,300 impact configurations were accounted for in the STS. Three vehicle shapes were then tested using the STS. The IWS was developed to weight the predicted injuries in the STS using the estimated proportion of each impact configuration in the PCDS accident data. A weighted injury number (WIN) was defined as the resulting output of the VTS. The WIN is the weighted number of average Abbreviated Injury Scale (AIS) 2+ injuries recorded per impact simulation in the STS. Then the predictive capability of the VTS was evaluated by comparing the distributions of AIS 2+ injuries to different pedestrian body regions and heights, as well as vehicle types and impact speeds, with that from the PCDS database. Further, a parametric analysis was performed with the VTS to assess the sensitivity of the injury predictions to changes in vehicle shape (type) and stiffness to establish the potential for using the VTS for future vehicle front-end optimization. An STS of 1,300 multibody simulations and an IWS based on the distribution of impact speed, pedestrian height, gait stance, and walking speed is broadly capable of predicting the distribution of pedestrian injuries observed in the PCDS database when the same vehicle type distribution as the accident data is employed. The sensitivity study shows significant variations in the WIN when either vehicle type or stiffness is altered. Injury predictions derived from the VTS give a good representation of the distribution of injuries observed in the PCDS and distinguishing ability on the aggressivity of vehicle front-end designs to pedestrians. The VTS can be considered as an effective approach for assessing pedestrian safety performance of vehicle front-end designs at the generalized level. However, the absolute injury number is substantially underpredicted by the VTS, and this needs further development.

Relationship between accident severity and full-scale crash test. Volume I, Technical research effort

DOT National Transportation Integrated Search

1984-08-01

Available accident files are used to generate a 4l2-accident data base of guardrail impacts. This base is analyzed to develop a statistical model for predicting accident severity index (ASI) as a function of vehicle type or weight, impact speed, and ...

Analysis of Fracture Mechanism for Al-Mg/SiCp Composite Materials

NASA Astrophysics Data System (ADS)

Maleque, M. A.; Adebisi, A. A.; Izzati, N.

2017-03-01

The present study aims to examine the fracture mechnism of silicon carbide particle (SiCp) reinforced aluminium matrix composite (AMC) material with 1 wt% addition of magnesium is fabricated using the stir casting process. The aluminium composite (Al-Mg/SiCp) is investigated for fatigue life and impact strength considering reinforcement weight fraction and influence of temperature on fracture toughness. The fabricated composite was tested using fatigue testing machine and charpy impact tester. Fractographic observations were evaluated with the scanning electron microscopy (SEM) on the fracture surface. It was found that increasing the SiCp weight fraction increased the fatigue life of the composite. Moreover, the 20 wt% SiCp Al-Mg composite attained the highest number of cycle and fatigue life compared to other variations. The mechanism responsible for the phenomena includes load transfer from the Al matrix alloy phase to the high strength and stiffness of the incorporated SiCp. The temperature variation influenced the impact strength of the composite and improved fracture toughness is achieved at 150 °C. It can be concluded from this study that reinforcement weight fraction and temperature affects the fracture behavior of the composites.

49 CFR 572.16 - Head.

Code of Federal Regulations, 2012 CFR

2012-10-01

... SA 103C 002, sheet 8. (b) When the head is impacted by a test probe specified in § 572.21(a)(1) at 7... supports the limbs' weight when the limbs are extended horizontally forward. (2) Adjust the test probe so... the forehead immediately adjacent to the projected longitudinal centerline of the test probe is...

49 CFR 572.16 - Head.

Code of Federal Regulations, 2010 CFR

2010-10-01

... SA 103C 002, sheet 8. (b) When the head is impacted by a test probe specified in § 572.21(a)(1) at 7... supports the limbs' weight when the limbs are extended horizontally forward. (2) Adjust the test probe so... the forehead immediately adjacent to the projected longitudinal centerline of the test probe is...

49 CFR 572.16 - Head.

Code of Federal Regulations, 2013 CFR

2013-10-01

... SA 103C 002, sheet 8. (b) When the head is impacted by a test probe specified in § 572.21(a)(1) at 7... supports the limbs' weight when the limbs are extended horizontally forward. (2) Adjust the test probe so... the forehead immediately adjacent to the projected longitudinal centerline of the test probe is...

49 CFR 572.16 - Head.

Code of Federal Regulations, 2011 CFR

2011-10-01

... SA 103C 002, sheet 8. (b) When the head is impacted by a test probe specified in § 572.21(a)(1) at 7... supports the limbs' weight when the limbs are extended horizontally forward. (2) Adjust the test probe so... the forehead immediately adjacent to the projected longitudinal centerline of the test probe is...

49 CFR 572.16 - Head.

Code of Federal Regulations, 2014 CFR

2014-10-01

... SA 103C 002, sheet 8. (b) When the head is impacted by a test probe specified in § 572.21(a)(1) at 7... supports the limbs' weight when the limbs are extended horizontally forward. (2) Adjust the test probe so... the forehead immediately adjacent to the projected longitudinal centerline of the test probe is...

A randomized trial Examining The Impact Of Communicating Genetic And Lifestyle Risks For Obesity.

PubMed

Wang, Catharine; Gordon, Erynn S; Norkunas, Tricia; Wawak, Lisa; Liu, Ching-Ti; Winter, Michael; Kasper, Rachel S; Christman, Michael F; Green, Robert C; Bowen, Deborah J

2016-12-01

Genetic testing for obesity is available directly to consumers, yet little is understood about its behavioral impact and its added value to nongenetic risk communication efforts based on lifestyle factors. A randomized trial examined the short-term impact of providing personalized obesity risk information, using a 2 × 2 factorial design. Participants were recruited from the Coriell Personalized Medicine Collaborative (CPMC) and randomized to receive (1) no risk information (control), (2) genetic risk, (3) lifestyle risk, or (4) combined genetic/lifestyle risks. Baseline and 3-month follow-up survey data were collected. Analyses examined the impact of risk feedback on intentions to lose weight and self-reported weight. A total of 696 participants completed the study. A significant interaction effect was observed for genetic and lifestyle information on intent to lose weight (P = 0.0150). Those who received genetic risk alone had greater intentions at follow-up, compared with controls (P = 0.0034). The impact of receiving elevated risk information on intentions varied by source and combination of risks presented. Non-elevated genetic risk did not lower intentions. No group differences were observed for self-reported weight. Genetic risk information for obesity may add value to lifestyle risk information depending on the context in which it is presented. © 2016 The Obesity Society.

Self-paced exercise program for office workers: impact on productivity and health outcomes.

PubMed

Low, David; Gramlich, Martha; Engram, Barbara Wright

2007-03-01

The impact of a self-paced exercise program on productivity and health outcomes of 32 adult workers in a large federal office complex was investigated during 3 months. Walking was the sole form of exercise. The first month, during which no walking occurred, was the control period. The second and third months were the experimental period. Participants were divided into three levels based on initial weight and self-determined walking distance goals. Productivity (using the Endicott Work Productivity Scale), walking distance (using a pedometer), and health outcomes (blood pressure, weight, pulse rate, and body fat percentage) were measured weekly. Results from this study, based on a paired t test analysis, suggest that although the self-paced exercise program had no impact on productivity, it lowered blood pressure and promoted weight loss. Further study using a larger sample and a controlled experimental design is recommended to provide conclusive evidence.

Drop Weight Impact Behavior of Al-Si-Cu Alloy Foam-Filled Thin-Walled Steel Pipe Fabricated by Friction Stir Back Extrusion

NASA Astrophysics Data System (ADS)

Hangai, Yoshihiko; Nakano, Yukiko; Utsunomiya, Takao; Kuwazuru, Osamu; Yoshikawa, Nobuhiro

2017-02-01

In this study, Al-Si-Cu alloy ADC12 foam-filled thin-walled stainless steel pipes, which exhibit metal bonding between the ADC12 foam and steel pipe, were fabricated by friction stir back extrusion. Drop weight impact tests were conducted to investigate the deformation behavior and mechanical properties of the foam-filled pipes during dynamic compression tests, which were compared with the results of static compression tests. From x-ray computed tomography observation, it was confirmed that the fabricated foam-filled pipes had almost uniform porosity and pore size distributions. It was found that no scattering of the fragments of collapsed ADC12 foam occurred for the foam-filled pipes owing to the existence of the pipe surrounding the ADC12 foam. Preventing the scattering of the ADC12 foam decreases the drop in stress during dynamic compression tests and therefore improves the energy absorption properties of the foam.

The Influence of Non-Nociceptive Factors on Hot Plate Latency in Rats

PubMed Central

Gunn, Amanda; Bobeck, Erin N.; Weber, Ceri; Morgan, Michael M.

2010-01-01

The hot plate is a widely used test to assess nociception. The effect of non-nociceptive factors (weight, sex, activity, habituation, and repeated testing) on hot plate latency was examined. Comparison of body weight and hot plate latency revealed a small but significant inverse correlation (light rats had longer latencies). Habituating rats to the test room for 1 hr prior to testing did not decrease hot plate latency except for female rats tested on Days 2 - 4. Hot plate latency decreased with repeated daily testing, but this was not caused by a decrease in locomotor activity or learning to respond. Activity on the hot plate was consistent across all four trials, and prior exposure to a room temperature plate caused a similar decrease in latency as rats tested repeatedly on the hot plate. Despite this decrease in baseline hot plate latency, there was no difference in morphine antinociceptive potency. The present study shows that weight, habituation to the test room, and repeated testing can alter baseline hot plate latency, but these effects are small and have relatively little impact on morphine antinociception. PMID:20797920

Effect of armor and carrying load on body balance and leg muscle function.

PubMed

Park, Huiju; Branson, Donna; Kim, Seonyoung; Warren, Aric; Jacobson, Bert; Petrova, Adriana; Peksoz, Semra; Kamenidis, Panagiotis

2014-01-01

This study investigated the impact of weight and weight distribution of body armor and load carriage on static body balance and leg muscle function. A series of human performance tests were conducted with seven male, healthy, right-handed military students in seven garment conditions with varying weight and weight distributions. Static body balance was assessed by analyzing the trajectory of center of plantar pressure and symmetry of weight bearing in the feet. Leg muscle functions were assessed by analyzing the peak electromyography amplitude of four selected leg muscles during walking. Results of this study showed that uneven weight distribution of garment and load beyond an additional 9 kg impaired static body balance as evidenced by increased sway of center of plantar pressure and asymmetry of weight bearing in the feet. Added weight on non-dominant side of the body created greater impediment to static balance. Increased garment weight also elevated peak EMG amplitude in the rectus femoris to maintain body balance and in the medial gastrocnemius to increase propulsive force. Negative impacts on balance and leg muscle function with increased carrying loads, particularly with an uneven weight distribution, should be stressed to soldiers, designers, and sports enthusiasts. Copyright © 2013 Elsevier B.V. All rights reserved.

Effect of low-speed impact damage on the buckling properties of E-glass/epoxy laminates

NASA Astrophysics Data System (ADS)

Yapici, A.; Metin, M.

2009-11-01

The postimpact buck ling loads of E-glass/epoxy laminates have been measured. Composite samples with the stacking sequence [+45/-45/90/0]2s were subjected to low-speed impact loadings at various energy levels. The tests were conducted on a specially developed vertical drop-weight testing machine. The main impact parameters, such as the peak load, absorbed energy, deflection at the peak load, and damage area, were evaluated and com pared. The damaged specimens were subjected to compressive axial forces, and their buckling loads were determined. The relation between the level of impact energy and buck ling loads is investigated.

Impact of rockfalls on protection measures: an experimental approach

NASA Astrophysics Data System (ADS)

Yuan, J.; Li, Y.; Huang, R.; Pei, X.

2015-01-01

The determination of rockfall impact force is crucial in designing the protection measures. In the present study, laboratory tests are carried out by taking the weight and shape of the falling rock fragments, drop height, incident angle, platform on the slideway and cushion layer on the protection measures as factors to investigate their influences on the impact force. The test results indicate that the impact force is positively exponential to the weight of rockfall and the instantaneous impact velocity of the rockfall approaching the protection measures. The impact velocity is found to be dominated not only by the drop height but also by the shape of rockfall as well as the length of the platform on the slideway. A great drop height and/or a short platform produce a fast impact velocity. Spherical rockfalls experience a reater impact velocity than cubic and cylindrical ones. A layer of cushion on the protection measures may reduce the impact force to a greater extent. The reduction effects are dominated by the cushion material and the thickness of the cushion layer. The thicker the cushion layer, the greater the reduction effect and the less the impact force. The stiffer the buffer material, the less the buffering effect and the greater the impact force. The present study indicates that the current standard in China for designing protection measures may overestimate the impact force by taking no consideration for the rockfall shape, platform and cushion layer.

Research on mechanical and sensoric set-up for high strain rate testing of high performance fibers

NASA Astrophysics Data System (ADS)

Unger, R.; Schegner, P.; Nocke, A.; Cherif, C.

2017-10-01

Within this research project, the tensile behavior of high performance fibers, such as carbon fibers, is investigated under high velocity loads. This contribution (paper) focuses on the clamp set-up of two testing machines. Based on a kinematic model, weight optimized clamps are designed and evaluated. By analyzing the complex dynamic behavior of conventional high velocity testing machines, it has been shown that the impact typically exhibits an elastic characteristic. This leads to barely predictable breaking speeds and will not work at higher speeds when acceleration force exceeds material specifications. Therefore, a plastic impact behavior has to be achieved, even at lower testing speeds. This type of impact behavior at lower speeds can be realized by means of some minor test set-up adaptions.

Effect of Reinforcement Using Stainless Steel Mesh, Glass Fibers, and Polyethylene on the Impact Strength of Heat Cure Denture Base Resin - An In Vitro Study

PubMed Central

Murthy, H B Mallikarjuna; Shaik, Sharaz; Sachdeva, Harleen; Khare, Sumit; Haralur, Satheesh B; Roopa, K T

2015-01-01

Background: The impact strength of denture base resin is of great concern and many approaches have been made to strengthen acrylic resin dentures. The objective of this study was to compare the impact strength of the denture base resin with and without reinforcement and to evaluate the impact strength of denture base resin when reinforced with stainless steel mesh, glass fiber, and polyethylene fibers in the woven form. Materials and Methods: The specimens (maxillary denture bases) were fabricated using a standard polyvinylsiloxane mold with conventional heat cured polymethyl methacrylate resin. The specimens were divided into four groups (n = 10). Group I specimens or control group were not reinforced. Group II specimens were reinforced with stainless steel mesh and Group III and Group IV specimens were reinforced with three percent by weight of glass fibers and polyethylene fibers in weave form respectively. All the specimens were immersed in water for 1-week before testing. The impact strength was measured with falling weight impact testing machine. One-way analysis of variance and Tukey’s post-hoc test were used for statistical analysis. Results: Highest impact strength values were exhibited by the specimens reinforced with polyethylene fibers followed by glass fibers, stainless steel mesh, and control group. Conclusions: Reinforcement of maxillary complete dentures showed a significant increase in impact strength when compared to unreinforced dentures. Polyethylene fibers exhibit better impact strength followed by glass fibers and stainless steel mesh. By using pre-impregnated glass and polyethylene fibers in woven form (prepregs) the impact strength of the denture bases can be increased effectively. PMID:26124604

The impact of supervised weight loss and intentional weight regain on sex hormone binding globulin and testosterone in premenopausal women.

PubMed

Aubuchon, Mira; Liu, Ying; Petroski, Gregory F; Thomas, Tom R; Polotsky, Alex J

2016-08-01

What is the impact of intentional weight loss and regain on serum androgens in women? We conducted an ancillary analysis of prospectively collected samples from a randomized controlled trial. The trial involved supervised 10% weight loss (8.5 kg on average) with diet and exercise over 4-6 months followed by supervised intentional regain of 50% of the lost weight (4.6 kg on average) over 4-6 months. Participants were randomized prior to the partial weight regain component to either continuation or cessation of endurance exercise. Analytic sample included 30 obese premenopausal women (mean age of 40 ± 5.9 years, mean baseline body mass index (BMI) of 32.9 ± 4.2 kg/m(2)) with metabolic syndrome. We evaluated sex hormone binding globulin (SHBG), total testosterone (T), free androgen index (FAI), and high molecular weight adiponectin (HMWAdp). Insulin, homeostasis model assessment (HOMA), and quantitative insulin sensitivity check index (QUICKI), and visceral adipose tissue (VAT) measured in the original trial were reanalyzed for the current analytic sample. Insulin, HOMA, and QUICKI improved with weight loss and were maintained despite weight regain. Log-transformed SHBG significantly increased from baseline to weight loss, and then significantly decreased with weight regain. LogFAI and logVAT decreased similarly and increased with weight loss followed by weight regain. No changes were found in logT and LogHMWAdp. There was no significant difference in any tested parameters by exercise between the groups. SHBG showed prominent sensitivity to body mass fluctuations, as reduction with controlled intentional weight regain showed an inverse relationship to VAT and occurred despite stable HMWAdp and sustained improvements with insulin resistance. FAI showed opposite changes to SHBG, while T did not change significantly with weight. Continued exercise during weight regain did not appear to impact these findings.

Impact of food support on food security and body weight among HIV antiretroviral therapy recipients in Honduras: a pilot intervention trial.

PubMed

Palar, Kartika; Derose, Kathryn Pitkin; Linnemayr, Sebastian; Smith, Alexandria; Farías, Hugo; Wagner, Glenn; Martinez, Homero

2015-01-01

Optimal strategies to improve food security and nutrition for people living with HIV (PLHIV) may differ in settings where overweight and obesity are prevalent and cardiovascular disease risk is a concern. However, no studies among PLHIV have investigated the impact of food support on nutritional outcomes in these settings. We therefore assessed the effect of food support on food insecurity and body weight in a population of PLHIV with high prevalence of overweight and obesity. We implemented a pilot intervention trial in four government-run HIV clinics in Honduras. The trial tested the effect of a monthly household food ration plus nutrition education (n = 203), compared to nutrition education alone (n = 197), over 12 months. Participants were clinic patients receiving antiretroviral therapy (ART). Assessments were obtained at baseline, 6 and 12 months. Primary outcomes for this analysis were food security, using the validated Latin American and Caribbean Food Security Scale and body weight (kg). Thirty-one percent of participants were overweight (22%) or obese (8%) at baseline. At 6 months, the probability of severe food insecurity decreased by 48.3% (p < 0.01) in the food support group, compared to 11.6% in the education-only group (p < 0.01). Among overweight or obese participants, food support led to average weight gain of 1.13 kg (p < 0.01), while nutrition education alone was associated with average weight loss of 0.72 kg (p < 0.10). Nutrition education alone was associated with weight gain among underweight and normal weight participants. Household food support may improve food security but not necessarily nutritional status of ART recipients above and beyond nutrition education. Improving nutritional tailoring of food support and testing the impact of nutrition education should be prioritized for PLHIV in Latin America and similar settings.

Social Stress Increases Cortisol and Hampers Attention in Adolescents with Excess Weight

PubMed Central

Verdejo-Garcia, Antonio; Moreno-Padilla, Maria; Garcia-Rios, M. Carmen; Lopez-Torrecillas, Francisca; Delgado-Rico, Elena; Schmidt-Rio-Valle, Jacqueline; Fernandez-Serrano, Maria J.

2015-01-01

Objective To experimentally examine if adolescents with excess weight are more sensitive to social stress and hence more sensitive to harmful effects of stress in cognition. Design and Methods We conducted an experimental study in 84 adolescents aged 12 to 18 years old classified in two groups based on age adjusted Body Mass Index percentile: Normal weight (n=42) and Excess weight (n=42). Both groups were exposed to social stress as induced by the virtual reality version of the Trier Social Stress Task --participants were requested to give a public speech about positive and negative aspects of their personalities in front of a virtual audience. The outcome measures were salivary cortisol levels and performance in cognitive tests before and after the social stressor. Cognitive tests included the CANTAB Rapid Visual Processing Test (measuring attention response latency and discriminability) and the Iowa Gambling Task (measuring decision-making). Results Adolescents with excess weight compared to healthy weight controls displayed increased cortisol response and less improvement of attentional performance after the social stressor. Decision-making performance decreased after the social stressor in both groups. Conclusion Adolescents who are overweight or obese have increased sensitivity to social stress, which detrimentally impacts attentional skills. PMID:25898204

Impact response of composite materials

NASA Technical Reports Server (NTRS)

Tiwari, S. N.; Srinivasan, K.

1991-01-01

Composite materials composed of carbon fibers and resin matrices offer great promise in reducing the weight of aerospace structures. However they remain extremely vulnerable to out of plane impact loads, which lead to severe losses in strength and stiffness. The results of an experimental program, undertaken to investigate the low velocity impact damage tolerance of composite materials is presented. The objectives were to identify key neat resin/composite properties that lead to enhancement of composite impact damage tolerance and to find a small scale test that predicts compression after impact properties of panels. Five materials were selected for evaluation. These systems represented different classes of material behavior such as brittle epoxy, modified epoxies, and amorphous and semicrystalling thermoplastics. The influence of fiber properties on the impact performance was also studied in one material, i.e., in polyether ether ketone (PEEK). Several 24 and 48 ply quasi-isotropic and 24 ply orthotropic laminates were examined using an instrumented drop weight impactor. Correlations with post impact compression behavior were made.

Detecting barely visible impact damages of honeycomb and laminate CFRP using digital shearography

NASA Astrophysics Data System (ADS)

Burkov, Mikhail; Lyubutin, Pavel; Byakov, Anton; Panin, Sergey

2017-12-01

The paper deals with testing of the developed shearographic device and signal processing software applied for nondestructive testing/evaluation (NDT/E) of carbon fiber reinforced polymers (CFRP). There were 4 types of test specimens: laminate CFRP, honeycomb CFRP, laminate CFRP with the channel stiffener, and laminate CFRP bolted with the aluminum plate. All the specimens were subjected to impact loading using the drop weight technique according to the ASTM D7136 standard in order to produce barely visible impact damages (BVID). The obtained shearograms easily reveal BVIDs as nonuniformities in strain fields. The results are analyzed and discussed in view of the sensitivity of shearography to delamination and debonding.

A comparison of impact force reduction by polymer materials used for mouthguard fabrication.

PubMed

Gawlak, Dominika; Mańka-Malara, Katarzyna; Mierzwińska-Nastalska, Elżbieta; Gieleta, Roman; Kamiński, Tomasz; Łuniewska, Magdalena

2017-01-01

The essential function of mouthguards is protection against the effects of injuries sustained during sports activities. This purpose will be successfully achieved if appropriate materials ensuring sufficient reduction of the injury force are used for mouthguard fabrication. The objective of the study was to investigate the force reduction capability of selected materials as well as to identify which material reduces the impact force to the highest degree. The material for the study were samples of polymers (6 samples in total), obtained during the process of deep pressing (2 samples), flasking (3 samples) and thermal injection (1 sample), which were tested for impact force damping using an impact device - Charpy impact hammer. The control group comprised of the ceramic material samples subjected to the hammer impact. The statistical analysis applied in this study were one-way Welch ANOVA with post-hoc Games-Howell pairwise comparisons. The test materials reduced the impact force of the impact hammer to varying degrees. The greatest damping capability was demonstrated for the following materials: Impak with 1:1 powder-to-liquid weight ratio polymerized with the conventional flasking technique, and Corflex Orthodontic used in the thermal injection technique of mouthguard fabrication. Impak with 1:1 weight ratio and Corflex Orthodontic should be recommended for the fabrication of mouthguards since they demonstrated the most advantageous damping properties.

Prediction of load threshold of fibre-reinforced laminated composite panels subjected to low velocity drop-weight impact using efficient data filtering techniques

NASA Astrophysics Data System (ADS)

Farooq, Umar; Myler, Peter

This work is concerned with physical testing of carbon fibrous laminated composite panels with low velocity drop-weight impacts from flat and round nose impactors. Eight, sixteen, and twenty-four ply panels were considered. Non-destructive damage inspections of tested specimens were conducted to approximate impact-induced damage. Recorded data were correlated to load-time, load-deflection, and energy-time history plots to interpret impact induced damage. Data filtering techniques were also applied to the noisy data that unavoidably generate due to limitations of testing and logging systems. Built-in, statistical, and numerical filters effectively predicted load thresholds for eight and sixteen ply laminates. However, flat nose impact of twenty-four ply laminates produced clipped data that can only be de-noised involving oscillatory algorithms. Data filtering and extrapolation of such data have received rare attention in the literature that needs to be investigated. The present work demonstrated filtering and extrapolation of the clipped data using Fast Fourier Convolution algorithm to predict load thresholds. Selected results were compared to the damage zones identified with C-scan and acceptable agreements have been observed. Based on the results it is proposed that use of advanced data filtering and analysis methods to data collected by the available resources has effectively enhanced data interpretations without resorting to additional resources. The methodology could be useful for efficient and reliable data analysis and impact-induced damage prediction of similar cases' data.

Experimental evaluation of the impact of maternal consumption of aqueous leaf extract of Hybanthus enneaspermus on pregnancy in Sprague Dawley rats.

PubMed

Olubajo, Awobajo Funmileyi; Adefunke, Adegoke Olufeyisipe; Olubusola, Iranloye Bolanle; Ibilola, Olatunji-Bello Ibiyemi

2013-01-01

The impact of aqueous leaf extract of Hybanthus enneaspermus (HEaq) on pregnancy factors and litter survival was investigated in Sprague Dawley (SD) rat. Control group received distilled water while the test group received 2g/kg body weight of HEaq orally. Blood samples were collected on days one and twenty of pregnancy for total blood count, serum thyroid hormone, thyroid stimulating hormone (TSH) and thyrotropin releasing hormone (TRH) assay. Half the number of rats in each group was sacrificed on day nineteen of pregnancy and the placenta and foetus were removed and weighed. The second half carried their pregnancy to term. Number and weights of litter were recorded at birth and the litter were also subjected to righting reflex test. Post-natal survival rate was determined for each group while effect of HEaq was also examined in-vivo on the activities of pregnant myometrial muscle. HEaq significantly decreased (p<0.05) foetal weight, placenta weight, foetal growth and survival, number and weights of litter at birth, maternal serum triiodotyroxine T3 and TSH level. Mean corpuscular haemoglobin, white blood cell count, platelet count and lipid profile were significantly increased (P<0.05). HEaq increased the frequency and percentage contraction of gravid myometrial muscle in a dose dependent manner. Maternal consumption of aqueous leaf extract of Hybanthus enneaspermus adversely affected pregnancy and development of the foetus, as it precipitated resorption of developing foetus and reduced size and weight of litter at term.

29 CFR 1928.53 - Protective enclosures for wheel-type agricultural tractors-test procedures and performance...

Code of Federal Regulations, 2013 CFR

2013-07-01

... accomplished by using a 4,410-lb (2,000-kg) weight acting as a pendulum. The impact face of the weight shall be... of the pendulum will swing, or alternatively, two sets of symmetrically located cables may be used at... from the rear, followed by a load to the side on the same enclosure structure. The pendulum swinging...

29 CFR 1928.53 - Protective enclosures for wheel-type agricultural tractors-test procedures and performance...

Code of Federal Regulations, 2010 CFR

2010-07-01

... accomplished by using a 4,410-lb (2,000-kg) weight acting as a pendulum. The impact face of the weight shall be... of the pendulum will swing, or alternatively, two sets of symmetrically located cables may be used at... from the rear, followed by a load to the side on the same enclosure structure. The pendulum swinging...

29 CFR 1928.53 - Protective enclosures for wheel-type agricultural tractors-test procedures and performance...

Code of Federal Regulations, 2014 CFR

2014-07-01

...,000-kg) weight acting as a pendulum. The impact face of the weight shall be 27 ±1 in. by 27 ±1 in... restraining cables shall be located in the plane in which the center of gravity of the pendulum will swing, or... side on the same enclosure structure. The pendulum swinging from the height determined by paragraph (d...

29 CFR 1928.53 - Protective enclosures for wheel-type agricultural tractors-test procedures and performance...

Code of Federal Regulations, 2012 CFR

2012-07-01

... accomplished by using a 4,410-lb (2,000-kg) weight acting as a pendulum. The impact face of the weight shall be... of the pendulum will swing, or alternatively, two sets of symmetrically located cables may be used at... from the rear, followed by a load to the side on the same enclosure structure. The pendulum swinging...

29 CFR 1928.53 - Protective enclosures for wheel-type agricultural tractors-test procedures and performance...

Code of Federal Regulations, 2011 CFR

2011-07-01

... accomplished by using a 4,410-lb (2,000-kg) weight acting as a pendulum. The impact face of the weight shall be... of the pendulum will swing, or alternatively, two sets of symmetrically located cables may be used at... from the rear, followed by a load to the side on the same enclosure structure. The pendulum swinging...

Materials and processes laboratory composite materials characterization task, part 1. Damage tolerance

NASA Technical Reports Server (NTRS)

Nettles, A. T.; Tucker, D. S.; Patterson, W. J.; Franklin, S. W.; Gordon, G. H.; Hart, L.; Hodge, A. J.; Lance, D. G.; Russel, S. S.

1991-01-01

A test run was performed on IM6/3501-6 carbon-epoxy in which the material was processed, machined into specimens, and tested for damage tolerance capabilities. Nondestructive test data played a major role in this element of composite characterization. A time chart was produced showing the time the composite material spent within each Branch or Division in order to identify those areas which produce a long turnaround time. Instrumented drop weight testing was performed on the specimens with nondestructive evaluation being performed before and after the impacts. Destructive testing in the form of cross-sectional photomicrography and compression-after-impact testing were used. Results show that the processing and machining steps needed to be performed more rapidly if data on composite material is to be collected within a reasonable timeframe. The results of the damage tolerance testing showed that IM6/3501-6 is a brittle material that is very susceptible to impact damage.

A damage tolerance comparison of IM7/8551 and IM8G/8553 carbon/epoxy composites

NASA Technical Reports Server (NTRS)

Lance, D. G.; Nettles, A. T.

1991-01-01

A damage tolerance study of two new toughened carbon fiber/epoxy resin systems was undertaken as a continuation of ongoing work into screening new opposites for resistance to foreign object impact. This report is intended to be a supplement to NASA TP 3029 in which four new fiber/resin systems were tested for damage tolerance. Instrumented drop weight impact testing was used to inflict damage to 16-ply quasi-isotropic specimens. Instrumented output data and cross-sectional examinations of the damage zone were utilized to quantify the damage. It was found that the two fiber/resin systems tested in this study were much more impact resistant than an untoughened composite such as T300/934, but were not as impact resistant as other materials previously studied.

Implicit and explicit weight bias in a national sample of 4,732 medical students: the medical student CHANGES study.

PubMed

Phelan, Sean M; Dovidio, John F; Puhl, Rebecca M; Burgess, Diana J; Nelson, David B; Yeazel, Mark W; Hardeman, Rachel; Perry, Sylvia; van Ryn, Michelle

2014-04-01

To examine the magnitude of explicit and implicit weight biases compared to biases against other groups; and identify student factors predicting bias in a large national sample of medical students. A web-based survey was completed by 4,732 1st year medical students from 49 medical schools as part of a longitudinal study of medical education. The survey included a validated measure of implicit weight bias, the implicit association test, and 2 measures of explicit bias: a feeling thermometer and the anti-fat attitudes test. A majority of students exhibited implicit (74%) and explicit (67%) weight bias. Implicit weight bias scores were comparable to reported bias against racial minorities. Explicit attitudes were more negative toward obese people than toward racial minorities, gays, lesbians, and poor people. In multivariate regression models, implicit and explicit weight bias was predicted by lower BMI, male sex, and non-Black race. Either implicit or explicit bias was also predicted by age, SES, country of birth, and specialty choice. Implicit and explicit weight bias is common among 1st year medical students, and varies across student factors. Future research should assess implications of biases and test interventions to reduce their impact. Copyright © 2013 The Obesity Society.

A self-determination theory approach to adults' healthy body weight motivation: A longitudinal study focussing on food choices and recreational physical activity.

PubMed

Hartmann, Christina; Dohle, Simone; Siegrist, Michael

2015-01-01

This study focuses on body weight motivation based on self-determination theory. The impact of body weight motivation on longitudinal changes in food choices, recreational physical activity and body mass index was explored. A sample of adults (N = 2917, 47% men), randomly selected from the telephone book, completed a questionnaire in two consecutive years (2012, 2013), self-reporting food choices, recreational physical activity and body weight motivation. Types of body weight motivation at T1 (autonomous regulation, introjected regulation, and external regulation) were tested with regard to their predictive potential for changes in food choices, recreational physical activity and body mass index (BMI). Autonomous motivation predicted improvements in food choices and long-term adherence to vigorous recreational physical activity in both genders. Introjected motivation predicted long-term adherence to vigorous recreational physical activity only in women. External motivation predicted negative changes in food choices; however, the type of body weight motivation had no impact on BMI in overweight adults in the long term. Autonomous goal-setting regarding body weight seems to be substantial for healthy food choices and adherence to recreational physical activity.

Impact of speed and magnitude of weight loss on the development of brain trophic changes in adolescents with anorexia nervosa: a case control study.

PubMed

Bomba, Monica; Riva, Anna; Veggo, Federica; Grimaldi, Marco; Morzenti, Sabrina; Neri, Francesca; Nacinovich, Renata

2013-02-19

Anorexia nervosa commonly arises during adolescence and is associated with more than one medical morbidity. Abnormalities in brain structure (defined as "pseudoatrophy") are common in adolescents with anorexia nervosa; however, their correlations with endocrinological profiles and clinical parameters are still unclear. In particular, no study has described the impact of BMI (body mass index) variations (speed and magnitude of weight loss) on cerebral trophism changes. Eleven adolescents with anorexia nervosa and 8 healthy controls underwent cerebral MRI (magnetic resonance imaging) examination to obtain global and partial volumes (gray matter, white matter and cerebrospinal fluid) and clinical evaluation. The Mann-Whitney U test was used to compare partial volumes and clinical variables between cases and controls. The Spearman non-parametric test was performed in order to explore correlations between the variables studied. The patients diagnosed with AN showed significantly increased cerebrospinal fluid (CSF) volumes and decreased total gray (GM) and white matter (WM) volumes. The degree of weight loss (deltaBMI) correlated inversely with the GM volume; the increase of CSF compartment correlated directly with the rapidity of weight loss (DeltaBMI/disease duration). This study suggests a correlation between cerebral alterations in AN and the speed and magnitude of weight loss, and outlines its importance for the therapeutic treatment.

Infant Growth Trajectories from Birth to 12 Months of Age: Findings from Delta Healthy Sprouts Comparative Impact Trial

USDA-ARS?s Scientific Manuscript database

Delta Healthy Sprouts was designed to test the comparative impact of two maternal, infant, and early childhood home visiting curricula on weight status, infant growth, and other health behaviors of women and their infants residing in the United States’ Lower Mississippi Delta region. A primary aim ...

Fetal Genotype and Maternal Glucose Have Independent and Additive Effects on Birth Weight.

PubMed

Hughes, Alice E; Nodzenski, Michael; Beaumont, Robin N; Talbot, Octavious; Shields, Beverley M; Scholtens, Denise M; Knight, Bridget A; Lowe, William L; Hattersley, Andrew T; Freathy, Rachel M

2018-05-01

Maternal glycemia is a key determinant of birth weight, but recent large-scale genome-wide association studies demonstrated an important contribution of fetal genetics. It is not known whether fetal genotype modifies the impact of maternal glycemia or whether it acts through insulin-mediated growth. We tested the effects of maternal fasting plasma glucose (FPG) and a fetal genetic score for birth weight on birth weight and fetal insulin in 2,051 European mother-child pairs from the Exeter Family Study of Childhood Health (EFSOCH) and the Hyperglycemia and Adverse Pregnancy Outcome (HAPO) study. The fetal genetic score influenced birth weight independently of maternal FPG and impacted growth at all levels of maternal glycemia. For mothers with FPG in the top tertile, the frequency of large for gestational age (birth weight ≥90th centile) was 31.1% for offspring with the highest tertile genetic score and only 14.0% for those with the lowest tertile genetic score. Unlike maternal glucose, the fetal genetic score was not associated with cord insulin or C-peptide. Similar results were seen for HAPO participants of non-European ancestry ( n = 2,842 pairs). This work demonstrates that for any level of maternal FPG, fetal genetics has a major impact on fetal growth and acts predominantly through independent mechanisms. © 2018 by the American Diabetes Association.

Impact of body composition on performance in fitness tests among personnel of the Croatian navy.

PubMed

Sporis, Goran; Jukić, Igor; Bok, Daniel; Vuleta, Dinko; Harasin, Drazen

2011-06-01

The purpose of this study was to determine the impact of body weight on fitness tests among the personnel of the Croatian navy. Forty two naval personnel (age 27 +/- 4.1 years; body mass 86.2 +/- 4.9 kg; height 184.6 +/- 7.4 cm; body fat percentage 17.3 +/- 5.2) participated in this study. In order to evaluate the fitness of the naval servicemen, we applied a testing procedure that included measurements of 7 fitness tests and 15 body anthropometric tests. A negative correlation was found between the body fat percentage and all the analyzed sprint tests and three anaerobic power tests (r), SP5 (r = -0.42), SP10 (r = -0.51), SP20 (r = -0.53), SJ (r = -0.45), CM (r = -0.57), SLJ (r = -0.67). Also a negative correlation was found between the body fat percentage and VO2(max) (r = -0.44). A positive correlation was found between the sprint test and the power performance test and thigh and calf girth. Spiriting ability is influenced by the strength of a person. This is one of the reasons why we found a positive correlation between the sprint test (SP5, SP10 and SP20) and thigh and calf girth. In this study we found a negative correlation between body fat percentages and all the sprint tests and three anaerobic power tests and VO2(max). The ectomorph somatotypes have positive correlations with all variables. The mesomorph somatotypes have the greatest positive correlations with all variables. The endomorph somatotypes have negative correlations with all variables. According to the body composition of Croatian naval servicemen we can conclude that they need a sufficient level of strength and endurance for everyday tasks. The effectiveness of a weight-management program is determined by the success of the participants in losing the necessary amount of weight and being able to maintain that weight loss. This requires long-term tracking of these individuals in a naval environment.

Quantitative nondestructive evaluation of materials and structures

NASA Technical Reports Server (NTRS)

Smith, Barry T.

1991-01-01

An experimental investigation was undertaken to quantify damage tolerance and resistance in composite materials impacted using the drop-weight method. Tests were conducted on laminates of several different carbon-fiber composite systems, such as epoxies, modified epoxies, and amorphous and semicrystalline thermoplastics. Impacted composite specimens were examined using destructive and non-destructive techniques to establish the characteristic damage states. Specifically, optical microscopy, ultrasonic, and scanning electron microscopy techniques were used to identify impact induced damage mechanisms. Damage propagation during post impact compression was also studied.

An examination of the damage tolerance enhancement of carbon/epoxy using an outer lamina of spectra (R)

NASA Technical Reports Server (NTRS)

Lance, D. G.; Nettles, A. T.

1991-01-01

Low velocity instrumented impact testing was utilized to examine the effects of an outer lamina of ultra-high molecular weight polyethylene (Spectra) on the damage tolerance of carbon epoxy composites. Four types of 16-ply quasi-isotropic panels (0, +45, 90, -45) were tested. Some panels contained no Spectra, while others had a lamina of Spectra bonded to the top (impacted side), bottom, or both sides of the composite plates. The specimens were impacted with energies up to 8.5 J. Force time plots and maximum force versus impact energy graphs were generated for comparison purposes. Specimens were also subjected to cross-sectional analysis and compression after impact tests. The results show that while the Spectra improved the maximum load that the panels could withstand before fiber breakage, the Spectra seemingly reduced the residual strength of the composites.

Fiber release from impacted graphite reinforced epoxy composites

NASA Technical Reports Server (NTRS)

Babinsky, T. C.

1980-01-01

Carbon fibers released from composites by aircraft fires and crashes can cause electrical shorts and consequent equipment damage. This report investigates less vigorous release mechanisms than that previously simulated by explosive burn/blast tests. When AS/3501-6 composites are impacted by various head and weight configurations of a pendulum impactor, less than 0.2 percent by weight of the original sample is released as single fibers. Other fiber release mechanisms studied were air blasts, constant airflow, torsion, flexural, and vibration of composite samples. The full significance of the low single fiber release rates found here is to be evaluated by NASA in their aircraft vulnerability studies.

Design and Testing of Braided Composite Fan Case Materials and Components

NASA Technical Reports Server (NTRS)

Roberts, Gary D.; Pereira, J. Michael; Braley, Michael S.; Arnold, William a.; Dorer, James D.; Watson, William R/.

2009-01-01

Triaxial braid composite materials are beginning to be used in fan cases for commercial gas turbine engines. The primary benefit for the use of composite materials is reduced weight and the associated reduction in fuel consumption. However, there are also cost benefits in some applications. This paper presents a description of the braided composite materials and discusses aspects of the braiding process that can be utilized for efficient fabrication of composite cases. The paper also presents an approach that was developed for evaluating the braided composite materials and composite fan cases in a ballistic impact laboratory. Impact of composite panels with a soft projectile is used for materials evaluation. Impact of composite fan cases with fan blades or blade-like projectiles is used to evaluate containment capability. A post-impact structural load test is used to evaluate the capability of the impacted fan case to survive dynamic loads during engine spool down. Validation of these new test methods is demonstrated by comparison with results of engine blade-out tests.

29 CFR 1928.52 - Protective frames for wheel-type agricultural tractors-test procedures and performance requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... a 4,410-lb (2,000-kg) weight acting as a pendulum. The impact face of the weight shall be 27 ±1 in... restraining cables shall be located in the plane in which the center of gravity of the pendulum will swing, or... pendulum swinging from the height determined by paragraph (d)(3)(ii) of this section shall be used to...

The influence of non-nociceptive factors on hot-plate latency in rats.

PubMed

Gunn, Amanda; Bobeck, Erin N; Weber, Ceri; Morgan, Michael M

2011-02-01

The hot plate is a widely used test to assess nociception. The effect of non-nociceptive factors (weight, sex, activity, habituation, and repeated testing) on hot-plate latency was examined. Comparison of body weight and hot-plate latency revealed a small but significant inverse correlation (light rats had longer latencies). Habituating rats to the test room for 1 hour prior to testing did not decrease hot-plate latency except for female rats tested on days 2 to 4. Hot-plate latency decreased with repeated daily testing, but this was not caused by a decrease in locomotor activity or learning to respond. Activity on the hot plate was consistent across all 4 trials, and prior exposure to a room-temperature plate caused a similar decrease in latency as rats tested repeatedly on the hot plate. Despite this decrease in baseline hot-plate latency, there was no difference in morphine antinociceptive potency. The present study shows that weight, habituation to the test room, and repeated testing can alter baseline hot-plate latency, but these effects are small and have relatively little impact on morphine antinociception. This manuscript shows that non-nociceptive factors such as body weight, habituation, and repeated testing can alter hot-plate latency, but these factors do not alter morphine potency. In sum, the hot-plate test is an easy to use and reliable method to assess supraspinally organized nociceptive responses. Copyright © 2011 American Pain Society. Published by Elsevier Inc. All rights reserved.

Low Velocity Impact Damage to Carbon/Epoxy Laminates

NASA Technical Reports Server (NTRS)

Nettles, Alan T.

2011-01-01

Impact damage tends to be more detrimental to a laminate's compression strength as compared to tensile strength. Proper use of Non Destructive Evaluation (NDE) Techniques can remove conservatism (weight) from many structures. Test largest components economically feasible as coupons. If damage tolerance is a driver, then consider different resin systems. Do not use a single knockdown factor to account for damage.

Protective Skins for Composite Airliners

NASA Technical Reports Server (NTRS)

Johnson, Vicki S.; Boone, Richard L.; Jones, Shannon; Pendse, Vandana; Hayward, Greg

2014-01-01

Traditional composite aircraft structures are designed for load bearing and then overdesigned for impact damage and hot humid environments. Seeking revolutionary improvement in the performance and weight of composite structures, Cessna Aircraft Company, with sponsorship from the NASA Fundamental Aeronautics Program/Subsonic Fixed Wing Project, has developed and tested a protective skin concept which would allow the primary composite structure to carry only load and would meet the impact, hot and humid, and other requirements through protective skins. A key requirement for the protective skins is to make any impact damage requiring repair visible. Testing from the first generation of skins helped identify the most promising materials which were used in a second generation of test articles. This report summarizes lessons learned from the first generation of protective skins, the design and construction of the second-generation test articles, test results from the second generation for impact, electromagnetic effects, aesthetics and smoothing, thermal, and acoustic (for the first time), and an assessment of the feasibility of the protective skin concept.

Teaching Weight-Gravity and Gravitation in Middle School. Testing a New Instructional Approach

NASA Astrophysics Data System (ADS)

Galili, Igal; Bar, Varda; Brosh, Yaffa

2016-12-01

This study deals with the school instruction of the concept of weight. The historical review reveals the major steps in changing weight definition reflecting the epistemological changes in physics. The latest change drawing on the operation of weighing has been not widely copied into physics education. We compared the older instruction based on the gravitational definition of weight with the newer one based on the operational definition. The experimental teaching was applied in two versions, simpler and extended. The study examined the impact of this instruction on the middle school students in regular teaching environment. The experiment involved three groups ( N = 486) of 14-year-old students (ninth grade). The assessment drew on a written questionnaire and personal interviews. The elicited schemes of conceptual knowledge allowed to evaluate the impact on students' pertinent knowledge. The advantage of the new teaching manifested itself in the significant decrease of the well-known misconceptions such as "space causes weightlessness," "weight is an unchanged property of the body considered," and "heavier objects fall faster". The twofold advantage—epistemological and conceptual—of the operational definition of weight supports the correspondent curricular changes of its adoption.

Metabolic impact of a ketogenic diet compared to a hypocaloric diet in obese children and adolescents.

PubMed

Partsalaki, Ioanna; Karvela, Alexia; Spiliotis, Bessie E

2012-01-01

The effects of carbohydrate-restricted (ketogenic) diets on metabolic parameters in children have been incompletely assessed. To compare the efficacy and metabolic impact of ketogenic and hypocaloric diets in obese children and adolescents. Fifty-eight obese subjects were placed on one of the two diets for 6 months. Anthropometric measurements, body composition, oral glucose/insulin tolerance test, lipidemic profile, high molecular weight (HMW) adiponectin, whole-body insulin sensitivity index (WBISI), and homeostatic model assessment-insulin resistance (HOMA-IR) were determined before and after each diet. Both groups significantly reduced their weight, fat mass, waist circumference, fasting insulin, and HOMA-IR (p = 0.009 for ketogenic and p = 0.014 for hypocaloric), but the differences were greater in the ketogenic group. Both groups increased WBISI significantly, but only the ketogenic group increased HMW adiponectin significantly (p = 0.025). The ketogenic diet revealed more pronounced improvements in weight loss and metabolic parameters than the hypocaloric diet and may be a feasible and safe alternative for children's weight loss.

Computation and application of tissue-specific gene set weights.

PubMed

Frost, H Robert

2018-04-06

Gene set testing, or pathway analysis, has become a critical tool for the analysis of highdimensional genomic data. Although the function and activity of many genes and higher-level processes is tissue-specific, gene set testing is typically performed in a tissue agnostic fashion, which impacts statistical power and the interpretation and replication of results. To address this challenge, we have developed a bioinformatics approach to compute tissuespecific weights for individual gene sets using information on tissue-specific gene activity from the Human Protein Atlas (HPA). We used this approach to create a public repository of tissue-specific gene set weights for 37 different human tissue types from the HPA and all collections in the Molecular Signatures Database (MSigDB). To demonstrate the validity and utility of these weights, we explored three different applications: the functional characterization of human tissues, multi-tissue analysis for systemic diseases and tissue-specific gene set testing. All data used in the reported analyses is publicly available. An R implementation of the method and tissue-specific weights for MSigDB gene set collections can be downloaded at http://www.dartmouth.edu/∼hrfrost/TissueSpecificGeneSets. rob.frost@dartmouth.edu.

Hypervelocity impact testing of advanced materials and structures for micrometeoroid and orbital debris shielding

NASA Astrophysics Data System (ADS)

Ryan, Shannon; Christiansen, Eric L.

2013-02-01

A series of 66 hypervelocity impact experiments have been performed to assess the potential of various materials (aluminium, titanium, copper, stainless steel, nickel, nickel/chromium, reticulated vitreous carbon, silver, ceramic, aramid, ceramic glass, and carbon fibre) and structures (monolithic plates, open-cell foam, flexible fabrics, rigid meshes) for micrometeoroid and orbital debris (MMOD) shielding. Arranged in various single-, double-, and triple-bumper configurations, screening tests were performed with 0.3175 cm diameter Al2017-T4 spherical projectiles at nominally 6.8 km/s and normal incidence. The top performing shields were identified through target damage assessments and their respective weight. The top performing candidate shield at the screening test condition was found to be a double-bumper configuration with a 0.25 mm thick Al3003 outer bumper, 6.35 mm thick 40 PPI aluminium foam inner bumper, and 1.016 mm thick Al2024-T3 rear wall (equal spacing between bumpers and rear wall). In general, double-bumper candidates with aluminium plate outer bumpers and foam inner bumpers were consistently found to be amongst the top performers. For this impact condition, potential weight savings of at least 47% over conventional all-aluminium Whipple shields are possible by utilizing the investigated materials and structures. The results of this study identify materials and structures of interest for further, more in-depth, impact investigations.

Results of a strategic science study to inform policies targeting extreme thinness standards in the fashion industry.

PubMed

Rodgers, Rachel F; Ziff, Sara; Lowy, Alice S; Yu, Kimberly; Austin, S Bryn

2017-03-01

The appearance pressures experienced by fashion models have been criticized as harmful to their health, as well as increasing eating disorder risk among youth by promoting ideals of extreme thinness. Given recent legislation to protect models, we undertook a strategic science study to assess professional fashion models' perceptions of the potential impact and feasibility of seven policy proposals. A sample of 85 female fashion models, mean age = 22.7 years (SD 3.7) completed an online survey assessing unhealthy weight control behaviors (UWCB), perceived pressure from agencies to lose weight, as well as the perceived impact and feasibility of seven potential policy actions. Chi-squared analyses and multivariable logistic regressions compared UWCB among models who were asked to lose weight and those who were not. Friedman and Kendall's W tests were conducted to examine differences in impact and feasibility ratings across the seven policy proposals. Models reported high levels of pressure to lose weight, which was associated with higher odds of engaging in UWCB. The policy approaches rated as most impactful were those to increase worker protections, though they were rated as only moderately feasible. Requiring employers to provide food and a 30-min break for jobs longer than 6 h was rated as both impactful and feasible. Imposing restrictions on minimum BMI was rated as the least impactful. Approaches providing employment protections and healthier working conditions are most supported by professional models. These findings help to illuminate viable policy approaches from the perspective of key stakeholders. © 2017 Wiley Periodicals, Inc.

Birth Weight and Intelligence in Young Adulthood and Midlife.

PubMed

Flensborg-Madsen, Trine; Mortensen, Erik Lykke

2017-06-01

We examined the associations between birth weight and intelligence at 3 different adult ages. The Copenhagen Perinatal Cohort is comprised of children born in Copenhagen from 1959 to 1961. Information on birth weight and ≥1 tests of intelligence was available for 4696 members of the cohort. Intelligence was assessed at a mean age of 19 years with the Børge Priens Prøve test, at age 28 years with the Wechsler Adult Intelligence Scale, and at age 50 years with the Intelligenz-Struktur-Test 2000 R. Birth weight was significantly associated with intelligence at all 3 follow-up assessments, with intelligence scores increasing across 4 birth weight categories and declining for the highest birth weight category. The adjusted differences between those in the <2.5kg birth weight group and those in the 3.5 to 4.00kg group were >5 IQ points at all 3 follow-up assessments, corresponding to one-third of a SD. The association was stable from young adulthood into midlife,and not weaker at age 50 years. Adjustment for potential confounding factors, including infant socioeconomic status and gestational age, did not dilute the associations, and associations with intelligence were evident across the normal birth weight range and so were not accounted for by low birth weight only. The association between birth weight and intelligence is stable from young adulthood into midlife. These long-term cognitive consequences may imply that even small shifts in the distribution of birth size, in normal-sized infants as well, may have a large impact at the population level. Copyright © 2017 by the American Academy of Pediatrics.

Mechanical performance of hemp fiber polypropylene composites at different operating temperatures

Treesearch

Mehdi Tajvidi; Nazanin Motie; Ghonche Rassam; Robert H. Falk; Colin Felton

2010-01-01

In order to quantify the effect of temperature on the mechanical properties of hemp fiber polypropylene composites, formulations containing 25% and 40% (by weight) hemp fiber were produced and tested at three representative temperatures of 256, 296, and 336 K. Flexural, tensile, and impact tests, as well as dynamic mechanical analysis, were performed and the reduction...

Development of testing machine for tunnel inspection using multi-rotor UAV

NASA Astrophysics Data System (ADS)

Iwamoto, Tatsuya; Enaka, Tomoya; Tada, Keijirou

2017-05-01

Many concrete structures are deteriorating to dangerous levels throughout Japan. These concrete structures need to be inspected regularly to be sure that they are safe enough to be used. The inspection method for these concrete structures is typically the impact acoustic method. In the impact acoustic method, the worker taps the surface of the concrete with a hammer. Thus, it is necessary to set up scaffolding to access tunnel walls for inspection. Alternatively, aerial work platforms can be used. However, setting up scaffolding and aerial work platforms is not economical with regard to time or money. Therefore, we developed a testing machine using a multirotor UAV for tunnel inspection. This test machine flies by a plurality of rotors, and it is pushed along a concrete wall and moved by using rubber crawlers. The impact acoustic method is used in this testing machine. This testing machine has a hammer to make an impact, and a microphone to acquire the impact sound. The impact sound is converted into an electrical signal and is wirelessly transmitted to the computer. At the same time, the position of the testing machine is measured by image processing using a camera. The weight and dimensions of the testing machine are approximately 1.25 kg and 500 mm by 500 mm by 250 mm, respectively.

Propensity to obesity impacts the neuronal response to energy imbalance.

PubMed

Cornier, Marc-Andre; McFadden, Kristina L; Thomas, Elizabeth A; Bechtell, Jamie L; Bessesen, Daniel H; Tregellas, Jason R

2015-01-01

The mechanisms responsible for the propensity to gain weight or remain normal weight are poorly understood. The objective of this study was to study the neuronal response to visual food cues during short-term energy imbalance in healthy adults recruited as obesity-resistant (OR) or obesity-prone (OP) based on self-identification, body mass index, and personal/family weight history. Twenty-five OR and 28 OP subjects were studied in underfed (UF) and overfed (OF) as compared to eucaloric (EU) conditions in a randomized crossover design. Each study phase included a 3-day run-in diet, 1 day of controlled feeding (basal energy needs for EU, 40% above/below basal energy needs for OF/UF), and a test day. On the test day, fMRI was performed in the acute fed stated (30 min after a test meal) while subjects viewed images of foods of high hedonic value and neutral non-food objects. Measures of appetite and hormones were also performed before and every 30 min after the test meal. UF was associated with significantly increased activation of insula, somatosensory cortex, inferior and medial prefrontal cortex (PFC), parahippocampus, precuneus, cingulate, and visual cortex in OR. However, UF had no impact in OP. As a result, UF was associated with significantly greater activation, specifically in the insula, inferior PFC, and somatosensory cortex in OR as compared to OP. While OF was overall associated with reduced activation of inferior visual cortex, no group interaction was observed with OF. In summary, these findings suggest that individuals resistant to weight gain and obesity are more sensitive to short-term energy imbalance, particularly with UF, than those prone to weight gain. The inability to sense or adapt to changes in energy balance may represent an important mechanism contributing to excess energy intake and risk for obesity.

Obesity and inflammatory bowel disease: diagnostic and therapeutic implications.

PubMed

Swanson, Sophia M; Harper, Jason; Zisman, Timothy L

2018-03-01

The review summarizes our current understanding of how obesity impacts diagnostic studies and therapies used in inflammatory bowel disease (IBD) as well as the safety and efficacy of medical and surgical weight loss therapies in the obese IBD patient. Many of the diagnostic tools we rely on in the identification and monitoring of IBD can be altered by obesity. Obesity is associated with increased acute phase proteins and fecal calprotectin. It can be more difficult to obtain and interpret cross sectional imaging of obese patients. Recent studies have also shown that common therapies used to treat IBD may be less effective in the obese population and may impact comorbid disease. Our understanding of how best to measure obesity is evolving. In addition to BMI, studies now include measures of visceral adiposity and subcutaneous to visceral adiposity ratios. An emerging area of interest is the safety and efficacy of obesity treatment including bariatric surgery in patients with IBD. A remaining question is how weight loss may alter the course of IBD. The proportion of obese IBD patients is on the rise. Caring for this population requires a better understanding of how obesity impacts diagnostic testing and therapeutic strategies. The approach to weight loss in this population is complex and future studies are needed to determine the safety of medical or surgical weight loss and its impact on the course of disease.

Impact of combined exposure of chemical, fertilizer, bio-fertilizer and compost on growth, physiology and productivity of Brassica campestries in old alluvial soil.

PubMed

Datta, J K; Banerjee, A; Sikdar, M Saha; Gupta, S; Mondal, N K

2009-09-01

Field experiment was carried out during November 2006 to February 2007 under old alluvial soil to evaluate the impact of combined dose of chemical fertilizer, biofertilizer in combination with compost for the yellow sarson (Brassica campestries cv. B9) in a randomized block design replicated thrice. Various morpho-physiological parameters viz., plant population, length of shoot and root, leaf area index (LAI), crop growth rate (CGR), net assimilation rate (NAR), yield attributes viz., number of siliquae per plant, number of seeds/siliquae, 1000 seed weight (test weight), seed yield, stover yield and physiological and biochemical parameters viz., pigment content, sugar, amino acid, protein, ascorbic acid content in physiologically active leaf were performed. The treatment T1 i.e., 40% less N fertilizer 25% less P fertilizer K fertilizer constant + 12 kg ha(-1) biofertilizer (Azophos) and organic manure (compost) @ 5Mt ha(-1), showed the maximum chlorophyll accumulation (10. 231 mg g(-1) freshweight), highest seed/siliquae (25.143), test weight of seeds (4. 861g) and highest seed yield (10.661 tha(-1)). A comparison between all the morphological, anatomical, physiological and biochemical parameters due to application of chemical fertilizer; bio-fertilizer and compost alone and in combination and their impact on soil microorganism, flora and fauna will throw a sound environmental information.

Development of the Second Generation Berry Impact Recording Device (BIRD II)

PubMed Central

Xu, Rui; Li, Changying

2015-01-01

To quantitatively measure the impacts during blueberry harvesting and post-harvest handling, this study designed the second generation Berry Impact Recording Device (BIRD II) sensor with a size of 21 mm in diameter and a weight of 3.9 g, which reduced the size by 17% and the weight by 50% compared to the previous prototype. The sensor was able to measure accelerations up to 346 g at a maximum frequency of 2 KHz. Universal Serial Bus (USB) was used to directly connect the sensor with the computer, removing the interface box used previously. LabVIEW-based PC software was designed to configure the sensor, download and process the data. The sensor was calibrated using a centrifuge. The accuracy of the sensor was between −1.76 g to 2.17 g, and the precision was between 0.21 g to 0.81 g. Dynamic drop tests showed that BIRD II had smaller variance in measurements than BIRD I. In terms of size and weight, BIRD II is more similar to an average blueberry fruit than BIRD I, which leads to more accurate measurements of the impacts for blueberries. PMID:25664430

Impact Resistance of Lightweight Hybrid Structures for Gas Turbine Engine Fan Containment Applications

NASA Technical Reports Server (NTRS)

Hebsur, Mohan G.; Noebe, Ronald D.; Revilock, Duane M.

2003-01-01

The ballistic impact resistance of hybrid composite sandwich structures was evaluated with the ultimate goal of developing new materials or structures for potential gas turbine engine fan containment applications. The sandwich structures investigated consisted of GLARE-5 laminates as face sheets with lightweight cellular metallic materials such as honeycomb, foam, and lattice block as a core material. The impact resistance of these hybrid sandwich structures was compared to GLARE-5 laminates and 2024-T3 Al sheet, which were tested as a function of areal weight (material thickness). The GLARE-5 laminates exhibited comparable impact properties to that of 2024-T3 Al at low areal weights, even though there were significant differences in the static tensile properties of these materials. The GLARE-5, however, did have a greater ballistic limit than straight aluminum sheet at higher areal weights. Furthermore, there is up to a 25% advantage in ballistic limit for the GLARE-5/foam sandwich structures compared to straight 2024-T3 Al. But no advantage in ballistic limit was observed between any of the hybrid sandwich structures and thicker versions of GLARE-5. Recommendations for future work are provided, based on these preliminary data.

Hidden impact damage in thick composites

NASA Technical Reports Server (NTRS)

Poe, C. C., Jr.; Illg, W.; Garber, D. P.

1986-01-01

NASA is developing light-weight graphite/epoxy filament-wound cases (FWC) for the solid rocket motors of the Space Shuttle. The 12-foot-diameter FWC's are about 1.4 inches or more thick. Tests were conducted to determine the tension strength of an FWC after low-velocity impact. Impactors of various kinetic energies, masses, and shapes were used. The conditions that give minimum visual evidence of damage were emphasized. The capability to characterize impact damage with radiography and ultrasonic attenuation was also evaluated. After impact, the specimens were loaded uniaxially in tension to determine residual strengths.

An examination of impact damage in glass-phenolic and aluminum honeycomb core composite panels

NASA Technical Reports Server (NTRS)

Nettles, A. T.; Lance, D. G.; Hodge, A. J.

1990-01-01

An examination of low velocity impact damage to glass-phenolic and aluminum core honeycomb sandwich panels with carbon-epoxy facesheets is presented. An instrumented drop weight impact test apparatus was utilized to inflict damage at energy ranges between 0.7 and 4.2 joules. Specimens were checked for extent of damage by cross sectional examination. The effect of core damage was assessed by subjecting impact-damaged beams to four-point bend tests. Skin-only specimens (facings not bonded to honeycomb) were also tested for comparison purposes. Results show that core buckling is the first damage mode, followed by delaminations in the facings, matrix cracking, and finally fiber breakage. The aluminum honeycomb panels exhibited a larger core damage zone and more facing delaminations than the glass-phenolic core, but could withstand more shear stress when damaged than the glass-phenolic core specimens.

Subjective Social Status, Mental and Psychosocial Health, and Birth Weight Differences in Mexican-American and Mexican Immigrant Women.

PubMed

Fleuriet, K Jill; Sunil, T S

2015-12-01

Recent Mexican immigrant women on average have an unexpectedly low incidence of low birth weight (LBW). Birth weights decline and LBW incidence increases in post-immigrant generations. This pilot project tested the hypothesis that subjective social status (SSS) of pregnant women predicts variation in birth weight between Mexican immigrant and Mexican-American women. 300 low-income pregnant Mexican immigrant and Mexican-American women in South Texas were surveyed for SSS, depression, pregnancy-related anxiety, perceived social stress and self-esteem and subsequent birth weight. No significant difference in SSS levels between pregnant Mexican immigrant and Mexican-American women were found. However, SSS better predicted variation in birth weight across both groups than mental and psychosocial health variables. Results suggest distinct relationships among SSS, mental and psychosocial health that could impact birth weight. They underscore the relevance of a multilevel, biopsychosocial analytical framework to studying LBW.

A Damage Tolerance Comparison of Composite Hat-Stiffened and Honeycomb Sandwich Structure for Launch Vehicle Interstage Applications

NASA Technical Reports Server (NTRS)

Nettles, A. T.

2011-01-01

In this study, a direct comparison of the compression-after-impact (CAI) strength of impact-damaged, hat-stiffened and honeycomb sandwich structure for launch vehicle use was made. The specimens used consisted of small substructure designed to carry a line load of approx..3,000 lb/in. Damage was inflicted upon the specimens via drop weight impact. Infrared thermography was used to examine the extent of planar damage in the specimens. The specimens were prepared for compression testing to obtain residual compression strength versus damage severity curves. Results show that when weight of the structure is factored in, both types of structure had about the same CAI strength for a given damage level. The main difference was that the hat-stiffened specimens exhibited a multiphase failure whereas the honeycomb sandwich structure failed catastrophically.

Jet slurry erosion performance of composite clad and its characterization

NASA Astrophysics Data System (ADS)

B, Lohit R.; Horakeri, Gururaj S.; Bhovi, Prabakhar M.

2016-09-01

In the present work, development of composite cladding consists of Cr23C6 (chromium carbide) as reinforcement particles 20 wt. % in Ni-based matrix 80 wt. % on austenitic stainless steel through exposure of microwave radiation has been carried out. The jet slurry erosion test was performed on microwave composite clad. The functional performance of composite clad has been evaluated for different parametric conditions like varying impingement velocity and impact angle. The increasing weight loss trend was observed with time for the first 30 min. after that the individual trend decreased; at high impingement velocity and maximum impact angle. SEM micrographs of eroded clad samples at various impact angle and impingement velocity were discussed. The maximum weight loss occurred at 90° angle and velocity of 60 m/s, and minimum at 30° angle and velocity of 20 m/s.

Hypervelocity Impact Experiments on Epoxy/Ultra-High Molecular Weight Polyethylene Composite Panels Reinforced with Nanotubes

NASA Technical Reports Server (NTRS)

Khatiwada, Suman; Laughman, Jay W.; Armada, Carlos A.; Christiansen, Eric L.; Barrera, Enrique V.

2012-01-01

Advanced composites with multi-functional capabilities are of great interest to the designers of aerospace structures. Polymer matrix composites (PMCs) reinforced with high strength fibers provide a lightweight and high strength alternative to metals and metal alloys conventionally used in aerospace architectures. Novel reinforcements such as nanofillers offer potential to improve the mechanical properties and add multi-functionality such as radiation resistance and sensing capabilities to the PMCs. This paper reports the hypervelocity impact (HVI) test results on ultra-high molecular weight polyethylene (UHMWPE) fiber composites reinforced with single-walled carbon nanotubes (SWCNT) and boron nitride nanotubes (BNNT). Woven UHMWPE fabrics, in addition to providing excellent impact properties and high strength, also offer radiation resistance due to inherent high hydrogen content. SWCNT have exceptional mechanical and electrical properties. BNNT (figure 1) have high neutron cross section and good mechanical properties that add multi-functionality to this system. In this project, epoxy based UHMWPE composites containing SWCNT and BNNT are assessed for their use as bumper shields and as intermediate plates in a Whipple Shield for HVI resistance. Three composite systems are prepared to compare against one another: (I) Epoxy/UHMWPE, (II) Epoxy/UHMWPE/SWCNT and (III) Epoxy/UHMWPE/SWCNT/BNNT. Each composite is a 10.0 by 10.0 by 0.11 cm3 panel, consisting of 4 layers of fabrics arranged in cross-ply orientation. Both SWCNT and BNNT are 0.5 weight % of the fabric preform. Hypervelocity impact tests are performed using a two-stage light gas gun at Rice University

The potential and biological test on cloned cassava crop remains on local sheep

NASA Astrophysics Data System (ADS)

Ginting, R.; Umar, S.; Hanum, C.

2018-02-01

This research aims at knowing the potential of cloned cassava crop remains dry matter and the impact of the feeding of the cloned cassava crop remains based complete feed on the consumption, the body weight gain, and the feed conversion of the local male sheep with the average of initial body weight of 7.75±1.75 kg. The design applied in the first stage research was random sampling method with two frames of tile and the second stage research applied Completely Randomized Design (CRD) with three (3) treatments and four (4) replicates. These treatments consisted of P1 (100% grass); P2 (50% grass, 50% complete feed pellet); P3 (100% complete feed from the raw material of cloned cassava crop remaining). Statistical tests showed that the feeding of complete feed whose raw material was from cloned cassava crop remains gave a highly significant impact on decreasing feed consumption, increasing body weight, lowering feed conversion, and increasing crude protein digestibility. The conclusion is that the cloned cassava crop remains can be used as complete sheep feed to replace green grass and can give the best result.

New Internet search volume-based weighting method for integrating various environmental impacts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ji, Changyoon, E-mail: changyoon@yonsei.ac.kr; Hong, Taehoon, E-mail: hong7@yonsei.ac.kr

Weighting is one of the steps in life cycle impact assessment that integrates various characterized environmental impacts as a single index. Weighting factors should be based on the society's preferences. However, most previous studies consider only the opinion of some people. Thus, this research proposes a new weighting method that determines the weighting factors of environmental impact categories by considering public opinion on environmental impacts using the Internet search volumes for relevant terms. To validate the new weighting method, the weighting factors for six environmental impacts calculated by the new weighting method were compared with the existing weighting factors. Themore » resulting Pearson's correlation coefficient between the new and existing weighting factors was from 0.8743 to 0.9889. It turned out that the new weighting method presents reasonable weighting factors. It also requires less time and lower cost compared to existing methods and likewise meets the main requirements of weighting methods such as simplicity, transparency, and reproducibility. The new weighting method is expected to be a good alternative for determining the weighting factor. - Highlight: • A new weighting method using Internet search volume is proposed in this research. • The new weighting method reflects the public opinion using Internet search volume. • The correlation coefficient between new and existing weighting factors is over 0.87. • The new weighting method can present the reasonable weighting factors. • The proposed method can be a good alternative for determining the weighting factors.« less

Damage Behaviors and Compressive Strength of Toughened CFRP Laminates with Thin Plies Subjected to Transverse Impact Loadings

NASA Astrophysics Data System (ADS)

Yokozeki, Tomohiro; Aoki, Yuichiro; Ogasawara, Toshio

It has been recognized that damage resistance and strength properties of CFRP laminates can be improved by using thin-ply prepregs. This study investigates the damage behaviors and compressive strength of CFRP laminates using thin-ply and standard prepregs subjected to out-of-plane impact loadings. CFRP laminates used for the evaluation are prepared using the standard prepregs, thin-ply prepregs, and combinations of the both. Weight-drop impact test and post-impact compression test of quasi-isotropic laminates are performed. It is shown that the damage behaviors are different between the thin-ply and the standard laminates, and the compression-after-impact strength is improved by using thin-ply prepregs. Effects of the use of thin-ply prepregs and the layout of thin-ply layers on the damage behaviors and compression-after-impact properties are discussed based on the experimental results.

Impact Landing Dynamics Facility Crash Test

NASA Image and Video Library

1975-08-03

Photographed on: 08/03/75. -- By 1972 the Lunar Landing Research Facility was no longer in use for its original purpose. The 400-foot high structure was swiftly modified to allow engineers to study the dynamics of aircraft crashes. "The Impact Dynamics Research Facility is used to conduct crash testing of full-scale aircraft under controlled conditions. The aircraft are swung by cables from an A-frame structure that is approximately 400 ft. long and 230 foot high. The impact runway can be modified to simulate other grand crash environments, such as packed dirt, to meet a specific test requirement." "In 1972, NASA and the FAA embarked on a cooperative effort to develop technology for improved crashworthiness and passenger survivability in general aviation aircraft with little or no increase in weight and acceptable cost. Since then, NASA has "crashed" dozens of GA aircraft by using the lunar excursion module (LEM) facility originally built for the Apollo program." This photograph shows Crash Test No. 7. Crash Test: Test #7

LX-04 VIOLENCE MEASUREMENTS- STEVEN TESTS IMPACTED BY PROJECTILES SHOT FROM A HOWITZER GUN

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chidester, S K; Vandersall, K S; Switzer, L L

Characterization of the reaction violence of LX-04 explosive (85% HMX and 15% Viton A by weight) was obtained from Steven Impact Tests performed above the reaction initiation threshold. A 155 mm Howitzer propellant driven gas gun was used to accelerate the Steven Test projectiles in the range of approximately 170-300 m/s to react (ignite) the LX-04 explosive. Blast overpressure gauges, acoustic microphones, and high-speed photography characterized the level of high explosive reaction violence. A detonation in this velocity range was not observed and when comparing these results (and the Susan test results) with that of other HMX based explosives, LX-04more » has a more gradual reaction violence slope as the impact velocity increases. The high binder content (15%) of the LX-04 explosive is believed to be the key factor to the lower level of violence.« less

Study of erosion characterization of carbon fiber reinforced composite material

NASA Astrophysics Data System (ADS)

Debnath, Uttam Kumar; Chowdhury, Mohammad Asaduzzaman; Kowser, Md. Arefin; Mia, Md. Shahin

2017-06-01

Carbon fiber composite materials are widely used at different engineering and industrial applications there are good physical, mechanical, chemical properties and light weight. Erosion behavior of materials depends on various factors such as impact angle, particle velocity, particle size, particle shape, particle type, particle flux, temperature of the tested materials. Among these factors impact angle and particle velocity have been recognized as two parameters that noticeably influence the erosion rates of all tested materials. Irregular shaped sand (SiO2) particles of various sizes (200-300 µm, 400-500 µm, and 500-600 µm) were selected erosive element. Tested conditions such as impingement angles between 15 degree to 90 degree, impact velocities between 30-50 m/sec, and stand-off distances 15-25 mm at surrounding room temperature were maintained. The highest level of erosion of the tested composite is obtained at 60° impact angle, which signifies the semi-ductile behavior of this material. Erosion showed increasing trend with impact velocity and decreasing nature in relation to stand-off distance. Surface damage was analyzed using SEM to examine the nature of the erosive wear mechanism.

Distributed Impact Detector System (DIDS) Health Monitoring System Evaluation

NASA Technical Reports Server (NTRS)

Prosser, William H.; Madaras, Eric I.

2010-01-01

Damage due to impacts from micrometeoroids and orbital debris is one of the most significant on-orbit hazards for spacecraft. Impacts to thermal protection systems must be detected and the damage evaluated to determine if repairs are needed to allow safe re-entry. To address this issue for the International Space Station Program, Langley Research Center and Johnson Space Center technologists have been working to develop and implement advanced methods for detecting impacts and resultant leaks. LaRC funded a Small Business Innovative Research contract to Invocon, Inc. to develop special wireless sensor systems that are compact, light weight, and have long battery lifetimes to enable applications to long duration space structures. These sensor systems are known as distributed impact detection systems (DIDS). In an assessment, the NASA Engineering and Safety Center procured two prototype DIDS sensor units to evaluate their capabilities in laboratory testing and field testing in an ISS Node 1 structural test article. This document contains the findings of the assessment.

Sleeping Well Trial: Increasing the effectiveness of treatment with continuous positive airway pressure using a weight management program in overweight adults with obstructive sleep apnoea-A stepped wedge randomised trial protocol.

PubMed

Truby, Helen; Edwards, Bradley A; O'Driscoll, Denise M; Young, Alan; Ghazi, Ladan; Bristow, Claire; Roem, Kerryn; Bonham, Maxine P; Murgia, Chiara; Day, Kaitlin; Haines, Terry P; Hamilton, Garun S

2018-05-24

The majority of adults diagnosed with obstructive sleep apnoea (OSA) are overweight or obese. Continuous positive airway pressure (CPAP) is the most common effective therapy for OSA. However, adherence declines over time with only 50% of patients prescribed CPAP continuing to use it long term. Furthermore, a recent prospective analysis indicated that those more adherent with CPAP therapy have enhanced weight gain trajectories which in turn may negatively impact their OSA. The Sleeping Well Trial aims to establish whether the timing of starting a lifestyle weight loss intervention impacts on weight trajectory in those with moderate-severe OSA treated at home with CPAP, while testing the potential for smart phone technology to improve adherence with lifestyle interventions. A stepped wedge design with randomisation of individuals from 1 to 6 months post-enrolment, with 5 months of additional prospective follow up after completion of the stepped wedge. This design will investigate the effect of the 6-month lifestyle intervention on people undergoing CPAP on body weight, body composition and health-related quality of life. This trial tests whether the timing of supporting the patient through a weight loss intervention is important in obtaining the maximum benefit of a lifestyle change and CPAP usage, and identify how best to support patients through this critical period. The protocol (v1) is registered prospectively with the International Clinical Trials Registry (CTR) ACTRN12616000203459 (public access). Any amendments to protocol will be documented via the CTR. Recruitment commenced in March 2016 with data collection scheduled to finish by May 2018. © 2018 Dietitians Association of Australia.

Effect of a hypocaloric diet with a commercial formula in weight loss and quality of life in obese patients with chronic osteoarthritis.

PubMed

de Luis, D A; Izaola, O; García Alonso, M; Aller, R; Cabezas, G; de la Fuente, B

2012-01-01

The aim of our study was to evaluate in patients with obesity and chronic osteoarthritis the impact on quality of life and metabolic control of a dietary intervention with a hypocaloric commercial formula. A sample of 55 obese patients with chronic osteoarthritis was enrolled. The study consisted of a 12-week weight reduction program where the participants received an oral diet replaced with 2 bricks of Optisource Plus®. In order to assess the effect of weight loss on different parameters, patients were divided in two groups by the median of weight loss percentage (9%); group 1 (< 9%) and group 2 (> 9%). In group 2, patients showed an improvement in total SF-36 score (4.0 ± 6.1 points), physical function domain of SF 36 (1.8 ± 3.4 points), role physical domain of SF 36 (0.6 ± 1.6 points) and vitality domain of SF 36 (2.7 ± 4.6 points) improved. Total score of WOMAC test (- 8.2 ± 15.0 points), function domain of WOMAC test (- 6.5 ± 10.6 points) and stiffness domain of WOMAC test (-0.7 ± 2.1 points) improved, too. The effect on metabolic response, functionality and quality of life was better in patients with a percentage of weight loss > 9% than patients with a lower weight loss.

Formal Process Modeling to Improve Human Decision-Making in Test and Evaluation Acoustic Range Control

DTIC Science & Technology

2017-09-01

AVAILABILITY STATEMENT Approved for public release. Distribution is unlimited. 12b. DISTRIBUTION CODE 13. ABSTRACT (maximum 200 words) Test and...ambiguities and identify high -value decision points? This thesis explores how formalization of these experience-based decisions as a process model...representing a T&E event may reveal high -value decision nodes where certain decisions carry more weight or potential for impacts to a successful test. The

Effective L/D: A Theoretical Approach to the Measurement of Aero-Structural Efficiency in Aircraft Design

NASA Technical Reports Server (NTRS)

Guynn, Mark D.

2015-01-01

There are many trade-offs in aircraft design that ultimately impact the overall performance and characteristics of the final design. One well recognized and well understood trade-off is that of wing weight and aerodynamic efficiency. Higher aerodynamic efficiency can be obtained by increasing wing span, usually at the expense of higher wing weight. The proper balance of these two competing factors depends on the objectives of the design. For example, aerodynamic efficiency is preeminent for sailplanes and long slender wings result. Although the wing weight-drag trade is universally recognized, aerodynamic efficiency and structural efficiency are not usually considered in combination. This paper discusses the concept of "aero-structural efficiency," which combines weight and drag characteristics. A metric to quantify aero-structural efficiency, termed effective L/D, is then derived and tested with various scenarios. Effective L/D is found to be a practical and robust means to simultaneously characterize aerodynamic and structural efficiency in the context of aircraft design. The primary value of the effective L/D metric is as a means to better communicate the combined system level impacts of drag and structural weight.

The Effect of Cost Sharing on an Employee Weight Loss Program: A Randomized Trial.

PubMed

John, Leslie K; Troxel, Andrea B; Yancy, William S; Friedman, Joelle; Zhu, Jingsan; Yang, Lin; Galvin, Robert; Miller-Kovach, Karen; Halpern, Scott D; Loewenstein, George; Volpp, Kevin

2018-01-01

To test the effects of employer subsidies on employee enrollment, attendance, and weight loss in a nationally available weight management program. A randomized trial tested the impact of employer subsidy: 100%; 80%, 50%, and a hybrid 50% subsidy that could become a 100% subsidy by attaining attendance targets. NCT01756066. Twenty three thousand twenty-three employees of 2 US companies. The primary outcome was the percentage of employees who enrolled in the weight management program. We also tested whether the subsidies were associated with differential attendance and weight loss over 12 months, as might be predicted by the expectation that they attract employees with differing degrees of motivation. Analysis and Results: Enrollment differed significantly by subsidy level ( P < .0001). The 100% subsidy produced the highest enrollment (7.7%), significantly higher than each of the lower subsidies (vs 80% subsidy: 6.2%, P = .002; vs 50% subsidy: 3.9%, P < .0001; vs hybrid: 3.7%, P < .0001). Enrollment in the 80% subsidy group was significantly higher than both lower subsidy groups (vs 50% subsidy: 3.9%, P < .0001; vs hybrid: 3.7%, P < .0001). Among enrollees, there were no differences among the 4 groups in attendance or weight loss. This pragmatic trial, conducted in a real-world workplace setting, suggests that higher rates of employer subsidization help individuals to enroll in weight loss programs, without a decrement in program effectiveness. Future research could explore the cost-effectiveness of such subsidies or alternative designs.

A Randomized Controlled Trial of Employer Matching of Employees' Monetary Contributions to Deposit Contracts to Promote Weight Loss.

PubMed

Kullgren, Jeffrey T; Troxel, Andrea B; Loewenstein, George; Norton, Laurie A; Gatto, Dana; Tao, Yuanyuan; Zhu, Jingsan; Schofield, Heather; Shea, Judy A; Asch, David A; Pellathy, Thomas; Driggers, Jay; Volpp, Kevin G

2016-07-01

To test whether employer matching of employees' monetary contributions increases employees' (1) participation in deposit contracts to promote weight loss and (2) weight loss. A 36-week randomized trial. Large employer in the northeast United States. One hundred thirty-two obese employees. Over 24 weeks, participants were asked to lose 24 pounds and randomized to monthly weigh-ins or daily weigh-ins with monthly opportunities to deposit $1 to $3 per day that was not matched, matched 1:1, or matched 2:1. Deposits and matched funds were returned to participants for each day they were below their goal weight. Rates of making ≥1 deposit, weight loss at 24 weeks (primary outcome), and 36 weeks. Deposit rates were compared using χ(2) tests. Weight loss was compared using t tests. Among participants eligible to make deposits, 29% made ≥1 deposit and matching did not increase participation. At 24 weeks, control participants gained an average of 1.0 pound, whereas 1:1 match participants lost an average of 5.3 pounds (P = .005). After 36 weeks, control participants gained an average of 2.1 pounds, whereas no match participants lost an average of 5.1 pounds (P = .008). Participation in deposit contracts to promote weight loss was low, and matching deposits did not increase participation. For deposit contracts to impact population health, ongoing participation will need to be higher. © The Author(s) 2016.

Shock-absorbing effect of shoe insert materials commonly used in management of lower extremity disorders.

PubMed

Shiba, N; Kitaoka, H B; Cahalan, T D; Chao, E Y

1995-01-01

The efficacy of 3 shock-absorbing materials was compared by determining impact characteristics with a drop test method and also by testing the effect of each material when used as a shoe insert in 16 asymptomatic subjects. Peak vertical ground reaction force (F1, F2, F3) and temporal force factors (T1, T2, T3) were obtained with a force plate at a high-frequency sampling rate. Impact force, impact time, impact slope, and impact energy were determined. A standard weight was dropped from 3 heights on each material covering the force plate while reduction of peak force was compared. Impact force was attenuated most effectively by Insert 3 (polymeric foam rubber) and averaged 11% less than that in shoes without inserts. Impact time was increased for all 3 inserts. Impact slope and impact energy were reduced significantly in Insert 3. There was a significant difference in peak vertical force F1 for all 3 inserts, in vertical force F2 for Insert 2 (viscoelastic polymeric material), and in vertical force F3 for Insert 2. Drop-test studies showed that at all ball heights, the highest mean peak force was observed consistently in Insert 2.

Impact of Weight Loss With Intragastric Balloon on Bone Density and Microstructure in Obese Adults.

PubMed

Madeira, Eduardo; Madeira, Miguel; Guedes, Erika Paniago; Mafort, Thiago Thomaz; Moreira, Rodrigo Oliveira; de Mendonça, Laura Maria Carvalho; Lima, Inayá Correa Barbosa; Neto, Leonardo Vieira; de Pinho, Paulo Roberto Alves; Lopes, Agnaldo José; Farias, Maria Lucia Fleiuss

2018-03-21

The historical concept that obesity protects against bone fractures has been questioned. Weight loss appears to reduce bone mineral density (BMD); however, the results in young adults are inconsistent, and data on the effects of weight loss on bone microstructure are limited. This study aimed to evaluate the impact of weight loss using an intragastric balloon (IGB) on bone density and microstructure. Forty obese patients with metabolic syndrome (mean age 35.1 ± 7.3 yr) used an IGB continuously for 6 mo. Laboratory tests, areal BMD, and body composition measurements via dual-energy X-ray absorptiometry, and volumetric BMD and bone microstructure measurements via high-resolution peripheral quantitative computed tomography were conducted before IGB placement and after IGB removal. The mean weight loss was 11.5%. After 6 mo, there were significant increases in vitamin D and carboxyterminal telopeptide of type 1 collagen levels. After IGB use, areal BMD increased in the spine but decreased in the total femur and the 33% radius. Cortical BMD increased in the distal radius but tended to decrease in the distal tibia. The observed trabecular bone loss in the distal tibia contributed to the decline in the total volumetric BMD at this site. There was a negative correlation between the changes in leptin levels and the measures of trabecular quality in the tibia on high-resolution peripheral quantitative computed tomography. Weight loss may negatively impact bone microstructure in young patients, especially for weight-bearing bones, in which obesity has a more prominent effect. Copyright © 2018 The International Society for Clinical Densitometry. Published by Elsevier Inc. All rights reserved.

Culture media influenced laboratory outcomes but not neonatal birth weight in assisted reproductive technology.

PubMed

Yin, Tai-lang; Zhang, Yi; Li, Sai-jiao; Zhao, Meng; Ding, Jin-li; Xu, Wang-ming; Yang, Jing

2015-12-01

Whether the type of culture media utilized in assisted reproductive technology has impacts on laboratory outcomes and birth weight of newborns in in-vitro fertilization (IVF)/intracytoplasmic sperm injection (ICSI) was investigated. A total of 673 patients undergoing IVF/ICSI and giving birth to live singletons after fresh embryo transfer on day 3 from Jan. 1, 2010 to Dec. 31, 2012 were included. Three types of culture media were used during this period: Quinn's Advantage (QA), Single Step Medium (SSM), and Continuous Single Culture medium (CSC). Fertilization rate (FR), normal fertilization rate (NFR), cleavage rate (CR), normal cleavage rate (NCR), good-quality embryo rate (GQER) and neonatal birth weight were compared using one-way ANOVA and χ (2) tests. Multiple linear regression analysis was performed to determine the impact of culture media on laboratory outcomes and birth weight. In IVF cycles, GQER was significantly decreased in SSM medium group as compared with QA or CSC media groups (63.6% vs. 69.0% in QA; vs. 71.3% in CSC, P=0.011). In ICSI cycles, FR, NFR and CR were significantly lower in CSC medium group than in other two media groups. No significant difference was observed in neonatal birthweight among the three groups (P=0.759). Multiple linear regression analyses confirmed that the type of culture medium was correlated with FR, NFR, CR and GQER, but not with neonatal birth weight. The type of culture media had potential influences on laboratory outcomes but did not exhibit an impact on the birth weight of singletons in ART.

Is weight gain really a catalyst for broader recovery?: The impact of weight gain on psychological symptoms in the treatment of adolescent anorexia nervosa.

PubMed

Accurso, Erin C; Ciao, Anna C; Fitzsimmons-Craft, Ellen E; Lock, James D; Le Grange, Daniel

2014-05-01

The main aims of this study were to describe change in psychological outcomes for adolescents with anorexia nervosa across two treatments, and to explore predictors of change, including baseline demographic and clinical characteristics, as well as weight gain over time. Participants were 121 adolescents with anorexia nervosa from a two-site (Chicago and Stanford) randomized controlled trial who received either family-based treatment or individual adolescent supportive psychotherapy. Psychological symptoms (i.e., eating disorder psychopathology, depressive symptoms, and self-esteem) were assessed at baseline, end of treatment, 6-month, and 12-month follow-up. Conditional multilevel growth models were used to test for predictors of slope for each outcome. Most psychological symptoms improved significantly from baseline to 12 month follow-up, regardless of treatment type. Depressive symptoms and dietary restraint were most improved, weight and shape concerns were least improved, and self-esteem was not at all improved. Weight gain emerged as a significant predictor of improved eating disorder pathology, with earlier weight gain having a greater impact on symptom improvement than later weight gain. Adolescents who presented with more severe, complex, and enduring clinical presentations (i.e., longer duration of illness, greater eating disorder pathology, binge-eating/purging subtype) also appeared to benefit more psychologically from treatment. Copyright © 2014 Elsevier Ltd. All rights reserved.

Study of Impact Damage in PVA-ECC Beam under Low-Velocity Impact Loading Using Piezoceramic Transducers and PVDF Thin-Film Transducers.

PubMed

Qi, Baoxin; Kong, Qingzhao; Qian, Hui; Patil, Devendra; Lim, Ing; Li, Mo; Liu, Dong; Song, Gangbing

2018-02-24

Compared to conventional concrete, polyvinyl alcohol fiber reinforced engineering cementitious composite (PVA-ECC) offers high-strength, ductility, formability, and excellent fatigue resistance. However, impact-induced structural damage is a major concern and has not been previously characterized in PVA-ECC structures. We investigate the damage of PVA-ECC beams under low-velocity impact loading. A series of ball-drop impact tests were performed at different drop weights and heights to simulate various impact energies. The impact results of PVA-ECC beams were compared with mortar beams. A combination of polyvinylidene fluoride (PVDF) thin-film sensors and piezoceramic-based smart aggregate were used for impact monitoring, which included impact initiation and crack evolution. Short-time Fourier transform (STFT) of the signal received by PVDF thin-film sensors was performed to identify impact events, while active-sensing approach was utilized to detect impact-induced crack evolution by the attenuation of a propagated guided wave. Wavelet packet-based energy analysis was performed to quantify failure development under repeated impact tests.

Study of Impact Damage in PVA-ECC Beam under Low-Velocity Impact Loading Using Piezoceramic Transducers and PVDF Thin-Film Transducers

PubMed Central

Qian, Hui; Li, Mo; Liu, Dong; Song, Gangbing

2018-01-01

Compared to conventional concrete, polyvinyl alcohol fiber reinforced engineering cementitious composite (PVA-ECC) offers high-strength, ductility, formability, and excellent fatigue resistance. However, impact-induced structural damage is a major concern and has not been previously characterized in PVA-ECC structures. We investigate the damage of PVA-ECC beams under low-velocity impact loading. A series of ball-drop impact tests were performed at different drop weights and heights to simulate various impact energies. The impact results of PVA-ECC beams were compared with mortar beams. A combination of polyvinylidene fluoride (PVDF) thin-film sensors and piezoceramic-based smart aggregate were used for impact monitoring, which included impact initiation and crack evolution. Short-time Fourier transform (STFT) of the signal received by PVDF thin-film sensors was performed to identify impact events, while active-sensing approach was utilized to detect impact-induced crack evolution by the attenuation of a propagated guided wave. Wavelet packet-based energy analysis was performed to quantify failure development under repeated impact tests. PMID:29495277

Impact tensile testing of wires

NASA Technical Reports Server (NTRS)

Dawson, T. H.

1976-01-01

The test consists of fixing one end of a wire specimen and allowing a threaded falling weight to strike the other. Assuming the dynamic stress in the wire to be a function only of its strain, energy considerations show for negligible wire inertia effects that the governing dynamic stress-strain law can be determined directly from impact energy vs. wire elongation data. Theoretical calculations are presented which show negligible wire inertia effects for ratios of wire mass to striking mass of the order of .01 or less. The test method is applied to soft copper wires and the dynamic stress-strain curve so determined is found to be about 30 percent higher than the corresponding static curve.

Gaining power and precision by using model-based weights in the analysis of late stage cancer trials with substantial treatment switching.

PubMed

Bowden, Jack; Seaman, Shaun; Huang, Xin; White, Ian R

2016-04-30

In randomised controlled trials of treatments for late-stage cancer, it is common for control arm patients to receive the experimental treatment around the point of disease progression. This treatment switching can dilute the estimated treatment effect on overall survival and impact the assessment of a treatment's benefit on health economic evaluations. The rank-preserving structural failure time model of Robins and Tsiatis (Comm. Stat., 20:2609-2631) offers a potential solution to this problem and is typically implemented using the logrank test. However, in the presence of substantial switching, this test can have low power because the hazard ratio is not constant over time. Schoenfeld (Biometrika, 68:316-319) showed that when the hazard ratio is not constant, weighted versions of the logrank test become optimal. We present a weighted logrank test statistic for the late stage cancer trial context given the treatment switching pattern and working assumptions about the underlying hazard function in the population. Simulations suggest that the weighted approach can lead to large efficiency gains in either an intention-to-treat or a causal rank-preserving structural failure time model analysis compared with the unweighted approach. Furthermore, violation of the working assumptions used in the derivation of the weights only affects the efficiency of the estimates and does not induce bias or inflate the type I error rate. The weighted logrank test statistic should therefore be considered for use as part of a careful secondary, exploratory analysis of trial data affected by substantial treatment switching. ©2015 The Authors. Statistics inMedicine Published by John Wiley & Sons Ltd.

Novel Method of Weighting Cumulative Helmet Impacts Improves Correlation with Brain White Matter Changes After One Football Season of Sub-concussive Head Blows.

PubMed

Merchant-Borna, Kian; Asselin, Patrick; Narayan, Darren; Abar, Beau; Jones, Courtney M C; Bazarian, Jeffrey J

2016-12-01

One football season of sub-concussive head blows has been shown to be associated with subclinical white matter (WM) changes on diffusion tensor imaging (DTI). Prior research analyses of helmet-based impact metrics using mean and peak linear and rotational acceleration showed relatively weak correlations to these WM changes; however, these analyses failed to account for the emerging concept that neuronal vulnerability to successive hits is inversely related to the time between hits (TBH). To develop a novel method for quantifying the cumulative effects of sub-concussive head blows during a single season of collegiate football by weighting helmet-based impact measures for time between helmet impacts. We further aim to compare correlations to changes in DTI after one season of collegiate football using weighted cumulative helmet-based impact measures to correlations using non-weighted cumulative helmet-based impact measures and non-cumulative measures. We performed a secondary analysis of DTI and helmet impact data collected on ten Division III collegiate football players during the 2011 season. All subjects underwent diffusion MR imaging before the start of the football season and within 1 week of the end of the football season. Helmet impacts were recorded at each practice and game using helmet-mounted accelerometers, which computed five helmet-based impact measures for each hit: linear acceleration (LA), rotational acceleration (RA), Gadd Severity Index (GSI), Head Injury Criterion (HIC 15 ), and Head Impact Technology severity profile (HITsp). All helmet-based impact measures were analyzed using five methods of summary: peak and mean (non-cumulative measures), season sum-totals (cumulative unweighted measures), and season sum-totals weighted for time between hits (TBH), the interval of time from hit to post-season DTI assessment (TUA), and both TBH and TUA combined. Summarized helmet-based impact measures were correlated to statistically significant changes in fractional anisotropy (FA) using bivariate and multivariable correlation analyses. The resulting R 2 values were averaged in each of the five summary method groups and compared using one-way ANOVA followed by Tukey post hoc tests for multiple comparisons. Total head hits for the season ranged from 431 to 1850. None of the athletes suffered a clinically evident concussion during the study period. The mean R 2 value for the correlations using cumulative helmet-based impact measures weighted for both TUA and TBH combined (0.51 ± 0.03) was significantly greater than the mean R 2 value for correlations using non-cumulative HIMs (vs. 0.19 ± 0.04, p < 0.0001), unweighted cumulative helmet-based impact measures (vs. 0.27 + 0.03, p < 0.0001), and cumulative helmet-based impact measures weighted for TBH alone (vs. 0.34 ± 0.02, p < 0.001). R 2 values for weighted cumulative helmet-based impact measures ranged from 0.32 to 0.77, with 60% of correlations being statistically significant. Cumulative GSI weighted for TBH and TUA explained 77% of the variance in the percent of white matter voxels with statistically significant (PWMVSS) increase in FA from pre-season to post-season, while both cumulative GSI and cumulative HIC 15 weighted for TUA accounted for 75% of the variance in PWMVSS decrease in FA. A novel method for weighting cumulative helmet-based impact measures summed over the course of a football season resulted in a marked improvement in the correlation to brain WM changes observed after a single football season of sub-concussive head blows. Our results lend support to the emerging concept that sub-concussive head blows can result in sub-clinical brain injury, and this may be influenced by the time between hits. If confirmed in an independent data set, our novel method for quantifying the cumulative effects of sub-concussive head blows could be used to develop threshold-based countermeasures to prevent the accumulation of WM changes with multiple seasons of play.

Impact resistance and fractography in ultra high molecular weight polyethylenes.

PubMed

Puértolas, J A; Pascual, F J; Martínez-Morlanes, M J

2014-02-01

Highly crosslinked ultra high molecular weight polyethylenes (UHMWPE) stabilized by a remelting process or by the addition of an antioxidant are highly wear resistant and chemically stable. However, these polyethylenes currently used in total joint replacements suffer a loss of mechanical properties, especially in terms of fracture toughness. In this study we analyze the impact behavior of different polyethylenes using an instrumented double notch Izod test. The materials studied are three resins: GUR1050, GUR1020 with 0.1wt% of vitamin E, and MG003 with 0.1wt% of vitamin E. These resins were gamma irradiated at 90kGy, and pre and post-irradiation remelting processes were applied to GUR1050 for two different time periods. Microstructural data were determined by means of differential scanning calorimetry and transmission electron microscopy. Fractography carried out on the impact fracture surfaces and images obtained by scanning electron microscopy after etching indicated the existence of a fringe structure formed by consecutive ductile-brittle and brittle-ductile transitions, which is related to the appearance of discontinuities in the load-deflection curves. A correlation has been made of the macroscopic impact strength results and the molecular chain and microstructural characteristics of these aforementioned materials, with a view to designing future resins with improved impact resistance. The use of UHMWPE resins with low molecular weight or the application of a remelting treatment could contribute to obtain a better impact strength behavior. © 2013 Published by Elsevier Ltd.

Flexible Foam Protection Materials for Constellation Space Suit Element Portable Life Support Subsystem Packaging Study

NASA Technical Reports Server (NTRS)

Tang, Henry H.; Orndoff, Evelyne S.; Thomas, Gretchen A.

2009-01-01

This paper discusses the effort in evaluating and selecting a light weight impact protection material for the Constellation Space Suit Element (CSSE) Portable Life Support Subsystem (PLSS) conceptual packaging study. A light weight material capable of holding and protecting the components inside the PLSS is required to demonstrate the viability of the flexible PLSS packaging concept. The material needs to distribute, dissipate, and absorb the impact energy of the PLSS falling on the lunar surface. It must also be very robust and function in the extreme lunar thermal vacuum environment for up to one hundred Extravehicular Activity (EVA) missions. This paper documents the performance requirements for selecting a foam protection material, and the methodologies for evaluating commercial off-the-shelf (COTS) foam protection materials. It also presents the materials properties test results and impact drop test results of the various foam materials evaluated in the study. The findings from this study suggest that a foam based flexible protection system is a viable solution for PLSS packaging. However, additional works are needed to optimize COTS foam properties or to develop a composite foam system that will meet all the performance requirements for the CSSE PLSS flexible packaging.

Constitutive modeling of polycarbonate over a wide range of strain rates and temperatures

NASA Astrophysics Data System (ADS)

Wang, Haitao; Zhou, Huamin; Huang, Zhigao; Zhang, Yun; Zhao, Xiaoxuan

2017-02-01

The mechanical behavior of polycarbonate was experimentally investigated over a wide range of strain rates (10^{-4} to 5× 103 s^{-1}) and temperatures (293 to 353 K). Compression tests under these conditions were performed using a SHIMADZU universal testing machine and a split Hopkinson pressure bar. Falling weight impact testing was carried out on an Instron Dynatup 9200 drop tower system. The rate- and temperature-dependent deformation behavior of polycarbonate was discussed in detail. Dynamic mechanical analysis (DMA) tests were utilized to observe the glass (α ) transition and the secondary (β ) transition of polycarbonate. The DMA results indicate that the α and β transitions have a dramatic influence on the mechanical behavior of polycarbonate. The decompose/shift/reconstruct (DSR) method was utilized to decompose the storage modulus into the α and β components and extrapolate the entire modulus, the α-component modulus and the β-component modulus. Based on three previous models, namely, Mulliken-Boyce, G'Sell-Jonas and DSGZ, an adiabatic model is proposed to predict the mechanical behavior of polycarbonate. The model considers the contributions of both the α and β transitions to the mechanical behavior, and it has been implemented in ABAQUS/Explicit through a user material subroutine VUMAT. The model predictions are proven to essentially coincide with the experimental results during compression testing and falling weight impact testing.

Assessment of Integrated Pedestrian Protection Systems with Autonomous Emergency Braking (AEB) and Passive Safety Components.

PubMed

Edwards, Mervyn; Nathanson, Andrew; Carroll, Jolyon; Wisch, Marcus; Zander, Oliver; Lubbe, Nils

2015-01-01

Autonomous emergency braking (AEB) systems fitted to cars for pedestrians have been predicted to offer substantial benefit. On this basis, consumer rating programs-for example, the European New Car Assessment Programme (Euro NCAP)-are developing rating schemes to encourage fitment of these systems. One of the questions that needs to be answered to do this fully is how the assessment of the speed reduction offered by the AEB is integrated with the current assessment of the passive safety for mitigation of pedestrian injury. Ideally, this should be done on a benefit-related basis. The objective of this research was to develop a benefit-based methodology for assessment of integrated pedestrian protection systems with AEB and passive safety components. The method should include weighting procedures to ensure that it represents injury patterns from accident data and replicates an independently estimated benefit of AEB. A methodology has been developed to calculate the expected societal cost of pedestrian injuries, assuming that all pedestrians in the target population (i.e., pedestrians impacted by the front of a passenger car) are impacted by the car being assessed, taking into account the impact speed reduction offered by the car's AEB (if fitted) and the passive safety protection offered by the car's frontal structure. For rating purposes, the cost for the assessed car is normalized by comparing it to the cost calculated for a reference car. The speed reductions measured in AEB tests are used to determine the speed at which each pedestrian in the target population will be impacted. Injury probabilities for each impact are then calculated using the results from Euro NCAP pedestrian impactor tests and injury risk curves. These injury probabilities are converted into cost using "harm"-type costs for the body regions tested. These costs are weighted and summed. Weighting factors were determined using accident data from Germany and Great Britain and an independently estimated AEB benefit. German and Great Britain versions of the methodology are available. The methodology was used to assess cars with good, average, and poor Euro NCAP pedestrian ratings, in combination with a current AEB system. The fitment of a hypothetical A-pillar airbag was also investigated. It was found that the decrease in casualty injury cost achieved by fitting an AEB system was approximately equivalent to that achieved by increasing the passive safety rating from poor to average. Because the assessment was influenced strongly by the level of head protection offered in the scuttle and windscreen area, a hypothetical A-pillar airbag showed high potential to reduce overall casualty cost. A benefit-based methodology for assessment of integrated pedestrian protection systems with AEB has been developed and tested. It uses input from AEB tests and Euro NCAP passive safety tests to give an integrated assessment of the system performance, which includes consideration of effects such as the change in head impact location caused by the impact speed reduction given by the AEB.

Cross-sectional examination of the damage zone in impacted specimens of carbon/epoxy and carbon/PEEK composites

NASA Technical Reports Server (NTRS)

Nettles, A. T.; Magold, N. J.

1990-01-01

Drop weight impact testing was utilized to inflict damage on eight-ply bidirectional and unidirectional samples of carbon/epoxy and carbon/PEEK (polyetheretherketone) test specimens with impact energies ranging from 0.80 J to 1.76 J. The impacting tip was of a smaller diameter (4.2-mm) than those used in most previous studies, and the specimens were placed with a diamond wheel wafering saw through the impacted area perpendicular to the outer fibers. Photographs at 12 x magnification were taken of these cross-sections and examined. The results on the bidirectional samples show little damage until 1.13 J, at which point delaminations were seen in the epoxy specimens. The PEEK specimens showed less delamination than the epoxy specimens for a given impact energy level. The unidirectional specimens displayed more damage than the bidirectional samples for a given impact energy, with the PEEK specimens showing much less damage than the epoxy material.

Impact Testing and Analysis of Composites for Aircraft Engine Fan Cases

NASA Technical Reports Server (NTRS)

Roberts, Gary D.; Revilock, Duane M.; Binienda, Wieslaw K.; Nie, Walter Z.; Mackenzie, S. Ben; Todd, Kevin B.

2002-01-01

The fan case in a jet engine is a heavy structure because of its size and because of the requirement that it contain a blade released during engine operation. Composite materials offer the potential for reducing the weight of the case. Efficient design, test, and analysis methods are needed to efficiently evaluate the large number of potential composite materials and design concepts. The type of damage expected in a composite case under blade-out conditions was evaluated using a subscale test in which a glass/epoxy composite half-ring target was impacted with a wedge-shaped titanium projectile. Fiber shearing occurred near points of contact between the projectile and target. Delamination and tearing occurred on a larger scale. These damage modes were reproduced in a simpler test in which flat glass/epoxy composites were impacted with a blunt cylindrical projectile. A surface layer of ceramic eliminated fiber shear fracture but did not reduce delamination. Tests on 3D woven carbon/epoxy composites indicated that transverse reinforcement is effective in reducing delamination. A 91 cm (36 in.) diameter full-ring sub-component was proposed for larger scale testing of these and other composite concepts. Explicit, transient, finite element analyses indicated that a full-ring test is needed to simulate complete impact dynamics, but simpler tests using smaller ring sections are adequate when evaluation of initial impact damage is the primary concern.

Breast-feeding and postpartum weight retention: a systematic review and meta-analysis.

PubMed

He, Xiujie; Zhu, Meng; Hu, Chuanlai; Tao, Xingyong; Li, Yingchun; Wang, Qiuwei; Liu, Yue

2015-12-01

Weight gained during pregnancy and postpartum weight retention might contribute to obesity in women of childbearing age. Whether breast-feeding (BF) may decrease postpartum weight retention (PPWR) is still controversial. The purpose of our systematic review and meta-analysis was to investigate the relationship between BF and PPWR. Three databases were systematically reviewed and the reference lists of relevant articles were checked. Meta-analysis was performed to quantify the pooled standardized mean differences (SMD) of BF on PPWR by using a random-effect model. Heterogeneity was tested using the χ 2 test and I 2 statistics. Publication bias was estimated from Egger's test (linear regression method) or Begg's test (rank correlation method). Among 349 search hits, eleven studies met the inclusion criteria for the meta-analysis. Seven studies were conducted in the USA, one in Brazil, one in France, one in Georgia and one in Croatia. Compared with formula-feeding, BF for 3 to ≤6 months seemed to have a negative influence on PPWR and if BF continued for >6 months had little or no influence on PPWR. In a subgroup meta-analysis, the results did not change substantially after the analysis had been classified by available confounding factors. There was no indication of a publication bias from the result of either Egger's test or Begg's test. Although the available evidence held belief that BF decreases PPWR, more robust studies are needed to reliably assess the impact of patterns and duration of BF on PPWR.

Gross Olfaction Before and After Laparoscopic Gastric Bypass.

PubMed

Zerrweck, Carlos; Gallardo, Vannia Castañeda; Calleja, Carmen; Sepúlveda, Elisa; Guilber, Lizbeth

2017-11-01

Obesity leads to olfaction alterations, and this can further impact food choices, appetite, and nutritional status. Bariatric procedures induce weight loss and change in taste and smell perception, but more information is needed, especially using objective olfaction tests. A prospective study was conducted during 6 months, with candidates to laparoscopic gastric bypass at a single institution. A preoperative nasofibroscopy and gross smell identification test (The Pocket Smell Test ®) were performed in those meeting the inclusion criteria. After 6 months, a new test was performed, and the primary objective was to determine if there was an improvement in the olfaction score. Weight loss and comorbidities improvement were also analyzed. From the 30 patients with morbid obesity enrolled, 21 met the inclusion criteria and ENT evaluation. At baseline, 42.8% of patients scored 3 points, 53.3% scored 2 points, and 4.7% scored 1 point. After 6 months, there was a -81.1% of change. Seventeen patients scored 3 points (p = 0.002 vs initial) and two scored 2 points (p = 0.006 vs initial). There were no patients with less than 2 points. Weight and comorbidities had a significant improvement as well. Laparoscopic gastric bypass improves the olfaction scores of the Pocket Smell Test in morbidly obese patients 6 months after their procedure. More complex tests can be used in candidates to bariatric surgery if low scores are detected initially. Other causes of olfaction dysfunctions should be determined if there is no improvement after weight loss.

Impact-induced solidlike behavior and elasticity in concentrated colloidal suspensions

NASA Astrophysics Data System (ADS)

Chu, Baojin; Salem, David R.

2017-10-01

Modified drop weight impact tests were performed on Si O2 -ethylene glycol concentrated suspensions. Counterintuitive impact-induced solidlike behavior and elasticity, causing significant deceleration and rebound of the impactor, were observed. We provide evidence that the observed large deceleration force on the impactor mainly originates from the hydrodynamic force, and that the elasticity arises from the short-range repulsive force of a solvation layer on the particle surface. This study presents key experimental results to help understand the mechanisms underlying various stress-induced solidification phenomena.

Oxygen Compatibility Testing of Composite Materials

NASA Technical Reports Server (NTRS)

Engel, Carl D.; Watkins, Casey N.

2006-01-01

Composite materials offer significant weight-saving potential for aerospace applications in propellant and oxidizer tanks. This application for oxygen tanks presents the challenge of being oxygen compatible in addition to complying with the other required material characteristics. This effort reports on the testing procedures and data obtained in examining and selecting potential composite materials for oxygen tank usage. Impact testing of composites has shown that most of these materials initiate a combustion event when impacted at 72 ft-lbf in the presence of liquid oxygen, though testing has also shown substantial variability in reaction sensitivities to impact. Data for screening of 14 potential composites using the Bruceton method is given herein and shows that the 50-percent reaction frequencies range from 17 to 67 ft-lbf. The pressure and temperature rises for several composite materials were recorded to compare the energy releases as functions of the combustion reactions with their respective reaction probabilities. The test data presented are primarily for a test pressure of 300 psia in liquid oxygen. The impact screening process is compared with oxygen index and autogenous ignition test data for both the composite and the basic resin. The usefulness of these supplemental tests in helping select the most oxygen compatible materials is explored. The propensity for mechanical impact ignition of the composite compared with the resin alone is also examined. Since an ignition-free composite material at the peak impact energy of 72 ft-lbf has not been identified, composite reactivity must be characterized over the impact energy level and operating pressure ranges to provide data for hazard analyses in selecting the best potential material for liquid tank usage.

VIVA LA SALUD INFANTILE: Pediatric obesity treatment in an underserved Hispanic community

USDA-ARS?s Scientific Manuscript database

Pediatric obesity in the US disproportionately impacts minority populations who face socioeconomic and cultural barriers to weight management programs. The specific aim of this pilot study was to test the effectiveness of diet behavior modification or diet behavior modification plus structured aerob...

Ultrasonic Assessment of Impact-Induced Damage and Microcracking in Polymer Matrix Composites

NASA Technical Reports Server (NTRS)

Gyekanyesi, John (Technical Monitor); Liaw, Benjamin; Villars, Esther; Delmont, Frantz

2003-01-01

The main objective of this NASA Faculty Awards for Research (FAR) project is to conduct ultrasonic assessment of impact-induced damage and microcracking in fiber-metal laminated (FML) composites at various temperatures. It is believed that the proposed study of impact damage assessment on FML composites will benefit several NASA's missions and current interests, such as ballistic impact testing of composite fan containment and high strain rate deformation modeling of polymer matrix composites. Impact-induced damage mechanisms in GLARE and ARALL fiber-metal laminates subject to instrumented drop-weight impacts at various temperatures were studied. GLARE and ARALL are hybrid composites made of alternating layers of aluminum and glass- (for GLARE) and aramid- (for ARALL) fiber reinforced epoxy. Damage in pure aluminum panels impacted by foreign objects was mainly characterized by large plastic deformation surrounding a deep penetration dent. On the other hand, plastic deformation in fiber-metal laminates was often not as severe although the penetration dent was still produced. The more stiff fiber-reinforced epoxy layers provided better bending rigidity; thus, enhancing impact damage tolerance. Severe cracking, however, occurred due to the use of these more brittle fiber-reinforced epoxy layers. Fracture patterns, e.g., crack length and delamination size, were greatly affected by the lay-up configuration rather than by the number of layers, which implies that thickness effect was not significant for the panels tested in this study. Immersion ultrasound techniques were then used to assess damages generated by instrumented drop-weight impacts onto these fiber-metal laminate panels as well as 2024-T3 aluminum/cast acrylic sandwich plates adhered by epoxy. Depending on several parameters, such as impact velocity, mass, temperature, laminate configuration, sandwich construction, etc., various types of impact damage were observed, including plastic deformation, radiating cracks emanating from the impact site, ring cracks surrounding the impact site, partial and full delamination, and combinations of these damages.

Ultrasonic Assessment of Impact-Induced Damage and Microcracking in Polymer Matrix Composites

NASA Technical Reports Server (NTRS)

Liaw, Benjamin; Villars, Esther; Delmont, Frantz; Bowles, Kenneth J. (Technical Monitor)

2001-01-01

The main objective of this NASA FAR project is to conduct ultrasonic assessment of impact-induced damage and microcracking in polymer matrix composites at various temperatures. It is believed that the proposed study of impact damage assessment on polymer matrix composites will benefit several NASA missions and current interests, such as ballistic impact testing of composite fan containment and high strain rate deformation modeling of polymer matrix composites. Impact-induced damage mechanisms in GLARE and ARALL fiber-metal laminates subject to instrumented drop-weight impacts at various temperatures were studied. GLARE and ARALL are hybrid composites made of alternating layers of aluminum and glass (for GLARE) and aramid- (for ARALL) fiber-reinforced epoxy. Damage in pure aluminum panels impacted by foreign objects was mainly characterized by large plastic deformation surrounding a deep penetration dent. On the other hand, plastic deformation in fiber-metal laminates was often not as severe although the penetration dent was still produced. The more stiff fiber-reinforced epoxy layers provided better bending rigidity; thus, enhancing impact damage tolerance. Severe cracking, however, occurred due to the use of these more brittle fiber-reinforced epoxy layers. Fracture patterns, e.g., crack length and delamination size, were greatly affected by the lay-up configuration rather than by the number of layers, which implies that thickness effect was not significant for the panels tested in this study. Immersion ultrasound techniques were then used to assess damages generated by instrumented drop-weight impacts onto these fiber-metal laminate panels as well as 6061-T6 aluminum/cast acrylic sandwich plates adhered by epoxy. Depending on several parameters, such as impact velocity, mass, temperature, laminate configuration, sandwich construction, etc., various types of impact damage were observed, including plastic deformation, radiating cracks emanating from the impact site, ring cracks surrounding the impact site, partial and full delamination, and combinations of these damages.

Dynamic impact testing of hedgehog spines using a dual-arm crash pendulum.

PubMed

Swift, Nathan B; Hsiung, Bor-Kai; Kennedy, Emily B; Tan, Kwek-Tze

2016-08-01

Hedgehog spines are a potential model for impact resistant structures and material. While previous studies have examined static mechanical properties of individual spines, actual collision tests on spines analogous to those observed in the wild have not previously been investigated. In this study, samples of roughly 130 keratin spines were mounted vertically in thin substrates to mimic the natural spine layout on hedgehogs. A weighted crash pendulum was employed to induce and measure the effects of repeated collisions against samples, with the aim to evaluate the influence of various parameters including humidity effect, impact energy, and substrate hardness. Results reveal that softer samples-due to humidity conditioning and/or substrate material used-exhibit greater durability over multiple impacts, while the more rigid samples exhibit greater energy absorption performance at the expense of durability. This trend is exaggerated during high-energy collisions. Comparison of the results to baseline tests with industry standard impact absorbing foam, wherein the spines exhibit similar energy absorption, verifies the dynamic impact absorption capabilities of hedgehog spines and their candidacy as a structural model for engineered impact technology. Copyright © 2016 Elsevier Ltd. All rights reserved.

Impact Foam Testing for Multi-Mission Earth Entry Vehicle Applications

NASA Technical Reports Server (NTRS)

Glaab, Louis J.; Agrawal, Paul; Hawbaker, James

2013-01-01

Multi-Mission Earth Entry Vehicles (MMEEVs) are blunt-body vehicles designed with the purpose of transporting payloads from outer space to the surface of the Earth. To achieve high-reliability and minimum weight, MMEEVs avoid use of limited-reliability systems, such as parachutes and retro-rockets, instead using built-in impact attenuators to absorb energy remaining at impact to meet landing loads requirements. The Multi-Mission Systems Analysis for Planetary Entry (M-SAPE) parametric design tool is used to facilitate the design of MMEEVs and develop the trade space. Testing was conducted to characterize the material properties of several candidate impact foam attenuators to enhance M-SAPE analysis. In the current effort, two different Rohacell foams were tested to determine their thermal conductivity in support of MMEEV design applications. These applications include thermal insulation during atmospheric entry, impact attenuation, and post-impact thermal insulation in support of thermal soak analysis. Results indicate that for these closed-cell foams, the effect of impact is limited on thermal conductivity due to the venting of the virgin material gas and subsequent ambient air replacement. Results also indicate that the effect of foam temperature is significant compared to data suggested by manufacturer's specifications.

What is the psychological impact of self-weighing? A meta-analysis.

PubMed

Benn, Yael; Webb, Thomas L; Chang, Betty P I; Harkin, Benjamin

2016-06-01

Many people self-weigh and many interventions addressing weight-related problems such as obesity promote self-weighing. However, while self-weighing has been associated with weight loss, there is mixed evidence regarding the psychological impact of this behaviour. The present review aimed to quantify the relationship between self-weighing and: (i) affect (e.g., anxiety, depression); (ii) psychological functioning (e.g., self-esteem); (iii) body-related attitudes and (iv) disordered eating. A computerized search of scientific databases in September 2014 and subsequent ancestry and citation searches identified 29 independent tests of the relationship between self-weighing on psychological outcomes. Meta-analysis was used to quantify the size of the association across the tests. Results indicated that there was no association between self-weighing and affect, body-related attitudes or disordered eating. There was, however, a small-sized negative association between self-weighing and psychological functioning. The age of participants, obesity status, the extent of weight loss, duration of self-weighing and study design (RCT versus correlational) were found to influence at least some of the psychological outcomes of self-weighing. The findings suggest that, for the most part, self-weighing is not associated with adverse psychological outcomes. However, in some cases the association between self-weighing and psychological outcomes may be more negative than in others.

What is the psychological impact of self-weighing? A meta-analysis

PubMed Central

Benn, Yael; Webb, Thomas L.; Chang, Betty P. I.; Harkin, Benjamin

2016-01-01

ABSTRACT Many people self-weigh and many interventions addressing weight-related problems such as obesity promote self-weighing. However, while self-weighing has been associated with weight loss, there is mixed evidence regarding the psychological impact of this behaviour. The present review aimed to quantify the relationship between self-weighing and: (i) affect (e.g., anxiety, depression); (ii) psychological functioning (e.g., self-esteem); (iii) body-related attitudes and (iv) disordered eating. A computerized search of scientific databases in September 2014 and subsequent ancestry and citation searches identified 29 independent tests of the relationship between self-weighing on psychological outcomes. Meta-analysis was used to quantify the size of the association across the tests. Results indicated that there was no association between self-weighing and affect, body-related attitudes or disordered eating. There was, however, a small-sized negative association between self-weighing and psychological functioning. The age of participants, obesity status, the extent of weight loss, duration of self-weighing and study design (RCT versus correlational) were found to influence at least some of the psychological outcomes of self-weighing. The findings suggest that, for the most part, self-weighing is not associated with adverse psychological outcomes. However, in some cases the association between self-weighing and psychological outcomes may be more negative than in others. PMID:26742706

A Comparison of Quasi-Static Indentation and Drop-Weight Impact Testing on Carbon-Epoxy Laminates

NASA Technical Reports Server (NTRS)

Prabhakaran, R.

2001-01-01

The project had two objectives: 1) The primary objective was to characterize damage tolerance of composite materials. To accomplish this, polymer matrix composites were to be subjected to static indentation as well as low-velocity impacts and the results analyzed. 2) A second objective was to investigate the effects of laser shock peening on the damage tolerance of aerospace materials, such as aluminum alloys, in terms of crack nucleation and crack propagation. The impact testing was proposed to be performed using a Dynatup drop tower. The specimens were to be placed over a square opening in a steel platen and impacted with a hemispherical tup. The damage was to be characterized in the laminate specimens. The damage tolerance of aerospace alloys was to be studied by conducting fatigue tests on aluminum alloy specimens with prior shock peening treatment. The crack length was to be monitored by a microscope and the crack propagation rate, da/dN, determined.

The impact of a tax on sugar-sweetened beverages according to socio-economic position: a systematic review of the evidence.

PubMed

Backholer, Kathryn; Sarink, Danja; Beauchamp, Alison; Keating, Catherine; Loh, Venurs; Ball, Kylie; Martin, Jane; Peeters, Anna

2016-12-01

A tax on sugar-sweetened beverages (SSB) has been proposed to address population weight gain but the effect across socio-economic position (SEP) is unclear. The current study aimed to clarify the differential impact(s) of SSB taxes on beverage purchases and consumption, weight outcomes and the amount paid in SSB taxes according to SEP. Databases (OVID and EMBASE) and grey literature were systematically searched in June 2015 to identify studies that examined effects of an SSB price increase on beverage purchases or consumption, weight outcomes or the amount paid in tax across SEP, within high-income countries. Of the eleven included articles, three study types were identified: (i) those that examined the association between variation in SSB taxes and SSB consumption and/or body weight (n 3); (ii) price elasticity estimation of SSB demand (n 1); and (iii) modelling of hypothetical SSB taxes by combining price elasticity estimates with population SEP-specific beverage consumption, energy intake or body weight (n 7). Few studies statistically tested differences in outcomes between SEP groups. Nevertheless, of the seven studies that reported on changes in weight outcomes for the total population following an increase in SSB price, all reported either similar reductions in weight across SEP groups or greater reductions for lower compared with higher SEP groups. All studies that examined the average household amount paid in tax (n 5) reported that an SSB tax would be regressive, but with small differences between higher- and lower-income households (0·10-1·0 % and 0·03 %-0·60 % of annual household income paid in SSB tax for low- and high-income households, respectively). Based on the available evidence, a tax on SSB will deliver similar population weight benefits across socio-economic strata or greater benefits for lower SEP groups. An SSB tax is shown to be consistently financially regressive, but to a small degree.

Influence of nanoclay on interlaminar shear strength and fracture toughness of glass fiber reinforced nanocomposites

NASA Astrophysics Data System (ADS)

Senthil Kumar, M. S.; Chithirai Pon Selvan, M.; Sampath, P. S.; Raja, K.; Balasundaram, K.

2018-04-01

Multilayer glass fiber reinforced polymer (GFRP) laminates filled with nanoclay was manufactured with compression moulding machine. In the present work, five kinds of nanoclay (Cloisite 25A) loadings viz. 2, 4, 6, 8 and 10% on weight basis of epoxy resin were employed to modify the interlaminar shear strength (ILSS), critical energy release rate (GIc) and impact energy properties of GFRP laminates. Experimental results obtained from ILSS test on clay filled GFRP confirm that the superior strength was attained at low clay content of 155.10 MPa. Furthermore, the mode I interlaminar fracture toughness test conducted on DCB specimens revealed that the commanding improvement of GIc was obtained at 2 wt.% clay content level. On the other hand, both ILSS and fracture toughness was getting reduced at higher clay loadings. At last, the impact strength of the test samples was investigated by using Izod impact test apparatus and observed that the impact energy was increased by 44.39% for 2 wt.% and followed by 24.87% for 4 wt.% clay loadings.

Modal and Impact Dynamics Analysis of an Aluminum Cylinder

NASA Technical Reports Server (NTRS)

Lessard, Wendy B.

2002-01-01

This paper presents analyses for the modal characteristics and impact response of an all-aluminum cylinder. The analyses were performed in preparation for impact tests of the cylinder at The Impact Dynamics Research Facility (IDRF) at the NASA Langley Research Center. Mode shapes and frequencies were computed using NASTRAN and compared with existing experimental data to assess the overall accuracy of the mass and stiffness of the finite element model. A series of non-linear impact analyses were then performed using MSC Dytran in which the weight distribution on the floor and the impact velocity of the cylinder were varied. The effects of impact velocity and mass on the rebound and gross deformation of the cylinder were studied in this investigation.

Modelling the side impact of carbon fibre tubes

NASA Astrophysics Data System (ADS)

Sudharsan, Ms R.; Rolfe, B. F., Dr; Hodgson, P. D., Prof

2010-06-01

Metallic tubes have been extensively studied for their crashworthiness as they closely resemble automotive crash rails. Recently, the demand to improve fuel economy and reduce vehicle emissions has led automobile manufacturers to explore the crash properties of light weight materials such as fibre reinforced polymer composites, metallic foams and sandwich structures in order to use them as crash barriers. This paper discusses the response of carbon fibre reinforced polymer (CFRP) tubes and their failure mechanisms during side impact. The energy absorption of CFRP tubes is compared to similar Aluminium tubes. The response of the CFRP tubes during impact was modelled using Abaqus finite element software with a composite fabric material model. The material inputs were given based on standard tension and compression test results and the in-plane damage was defined based on cyclic shear tests. The failure modes and energy absorption observed during the tests were well represented by the finite element model.

Weight-elimination neural networks applied to coronary surgery mortality prediction.

PubMed

Ennett, Colleen M; Frize, Monique

2003-06-01

The objective was to assess the effectiveness of the weight-elimination cost function in improving classification performance of artificial neural networks (ANNs) and to observe how changing the a priori distribution of the training set affects network performance. Backpropagation feedforward ANNs with and without weight-elimination estimated mortality for coronary artery surgery patients. The ANNs were trained and tested on cases with 32 input variables describing the patient's medical history; the output variable was in-hospital mortality (mortality rates: training 3.7%, test 3.8%). Artificial training sets with mortality rates of 20%, 50%, and 80% were created to observe the impact of training with a higher-than-normal prevalence. When the results were averaged, weight-elimination networks achieved higher sensitivity rates than those without weight-elimination. Networks trained on higher-than-normal prevalence achieved higher sensitivity rates at the cost of lower specificity and correct classification. The weight-elimination cost function can improve the classification performance when the network is trained with a higher-than-normal prevalence. A network trained with a moderately high artificial mortality rate (artificial mortality rate of 20%) can improve the sensitivity of the model without significantly affecting other aspects of the model's performance. The ANN mortality model achieved comparable performance as additive and statistical models for coronary surgery mortality estimation in the literature.

Atmospheric model development in support of SEASAT. Volume 1: Summary of findings

NASA Technical Reports Server (NTRS)

Kesel, P. G.

1977-01-01

Atmospheric analysis and prediction models of varying (grid) resolution were developed. The models were tested using real observational data for the purpose of assessing the impact of grid resolution on short range numerical weather prediction. The discretionary model procedures were examined so that the computational viability of SEASAT data might be enhanced during the conduct of (future) sensitivity tests. The analysis effort covers: (1) examining the procedures for allowing data to influence the analysis; (2) examining the effects of varying the weights in the analysis procedure; (3) testing and implementing procedures for solving the minimization equation in an optimal way; (4) describing the impact of grid resolution on analysis; and (5) devising and implementing numerous practical solutions to analysis problems, generally.

Impact of Adult Weight, Density, and Age on Reproduction of Tenebrio molitor (Coleoptera: Tenebrionidae)

USDA-ARS?s Scientific Manuscript database

The impact of adult weight, age, and density on reproduction of Tenebrio molitor L. (Coleoptera: Tenebrionidae) was studied. The impact of adult weight on reproduction was determined in two ways: 1) counting the daily progeny of individual adult pairs of known weight and analyzing the data with line...

Development of a primary standard for dynamic pressure based on drop weight method covering a range of 10 MPa-400 MPa

NASA Astrophysics Data System (ADS)

Salminen, J.; Högström, R.; Saxholm, S.; Lakka, A.; Riski, K.; Heinonen, M.

2018-04-01

In this paper we present the development of a primary standard for dynamic pressures that is based on the drop weight method. At the moment dynamic pressure transducers are typically calibrated using reference transducers, which are calibrated against static pressure standards. Because dynamic and static characteristics of pressure transducers may significantly differ from each other, it is important that these transducers are calibrated against dynamic pressure standards. In a method developed in VTT Technical Research Centre of Finland Ltd, Centre for Metrology MIKES, a pressure pulse is generated by impact between a dropping weight and a piston of a liquid-filled piston-cylinder assembly. The traceability to SI-units is realized through interferometric measurement of the acceleration of the dropping weight during impact, the effective area of the piston-cylinder assembly and the mass of the weight. Based on experimental validation and an uncertainty evaluation, the developed primary standard provides traceability for peak pressures in the range from 10 MPa to 400 MPa with a few millisecond pulse width and a typical relative expanded uncertainty (k  =  2) of 1.5%. The performance of the primary standard is demonstrated by test calibrations of two dynamic pressure transducers.

Shock sensitivity of LX 04 at elevated temperatures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Urtiew, P.A.; Tarver, C.M.; Gorbes, J.W.

1997-07-01

Hazard scenarios can involve multiple stimuli, such as heating followed by fragment impact (shock). The shock response of LX-04 (85 weight % HMX and 15 weight % Viton binder) preheated to temperatures hear 170C is studied in a 10.2 cm bore diameter gas gun using embedded manganin pressure gauges. The pressure histories at various depths in the LX-04 targets and the run distances to detonation at several input shock pressures are measured and compared to those obtained in ambient temperature LX-04. The hot LX-04 is significantly more shock sensitive than ambient LX-04. Ignition and Growth reactive flow models are developedmore » for ambient and hot LX-04 to allow predictions of impact scenarios that a can not be tested directly.« less

Impact of Maternal Glucose and Gestational Weight Gain on Child Obesity over the First Decade of Life in Normal Birth Weight Infants.

PubMed

Hillier, Teresa A; Pedula, Kathryn L; Vesco, Kimberly K; Oshiro, Caryn E S; Ogasawara, Keith K

2016-08-01

Objective To determine, among children with normal birth weight, if maternal hyperglycemia and weight gain independently increase childhood obesity risk in a very large diverse population. Methods Study population was 24,141 individuals (mothers and their normal birth weight offspring, born 1995-2003) among a diverse population with universal GDM screening [50-g glucose-challenge test (GCT); 3 h. 100 g oral glucose tolerance test (OGTT) if GCT+]. Among the 13,037 full-term offspring with normal birth weight (2500-4000 g), annual measured height/weight was ascertained between ages 2 and 10 years to calculate gender-specific BMI-for-age percentiles using USA norms (1960-1995 standard). Results Among children who began life with normal birth weight, we found a significant trend for developing both childhood overweight (>85 %ile) and obesity (>95 %ile) during the first decade of life with both maternal hyperglycemia (normal GCT, GCT+ but no GDM, GDM) and excessive gestational weight gain [>40 pounds (18.1 kg)]; p < 0.0001 for both trends. These maternal glucose and/or weight gain effects to imprint for childhood obesity in the first decade remained after adjustment for potential confounders including maternal age, parity, as well as pre-pregnancy BMI. The attributable risk (%) for childhood obesity was 28.5 % (95 % CI 15.9-41.1) for GDM and 16.4 % (95 % CI 9.4-23.2) for excessive gestational weight gain. Conclusions for Practice Both maternal hyperglycemia and excessive weight gain have independent effects to increase childhood obesity risk. Future research should focus on prevention efforts during pregnancy as a potential window of opportunity to reduce childhood obesity.

The Impact of a School-Based Weight Management Program Involving Parents via mHealth for Overweight and Obese Children and Adolescents with Intellectual Disability: A Randomized Controlled Trial

PubMed Central

Leung, Cynthia; Chen, Hong; Brown, Michael; Chen, Jyu-Lin; Cheung, Gordon; Lee, Paul H.

2017-01-01

There is a scarcity of resources and studies that utilize targeted weight management interventions to engage parents via mHealth tools targeting obese children and adolescents with mild intellectual disabilities (MIDs) extended from school to a home setting. To test the feasibility and acceptability of a school-based weight program (SBWMP) involving parents via mHealth tools designed to reduce weight, enhance knowledge and adopt healthy lifestyles, and thereby achieve better psychosocial well-being among children and adolescents with MIDs. Four special schools were randomly assigned as intervention or control schools. Students from the intervention group (n = 63) were compared to those in the control group (n = 52), which comprised those with usual school planned activities and no parental involvement. Demographics were considered as covariates in a general linear model, an ordinal regression model and a binary logistic regression model analyzing the relationships between the SBWMP and the outcome variables at baseline (T0) and six months later (T1). Body weight, body mass index, and triceps and subscapular skinfold thickness were lower in the intervention group compared to the control group, although the differences were not statistically significant. There was a positive and direct impact of the SBWMP on students’ health knowledge and psychological impacts in the intervention group. The SBWMP extended to the home involving parents via mHealth tools is a feasible and acceptable program for this group with MIDs and their parents. PMID:28981460

Development and Evaluation of Stitched Sandwich Panels

NASA Technical Reports Server (NTRS)

Stanley, Larry E.; Adams, Daniel O.; Reeder, James R. (Technical Monitor)

2001-01-01

This study explored the feasibility and potential benefits provided by the addition of through-the-thickness reinforcement to sandwich structures. Through-the-thickness stitching is proposed to increase the interlaminar strength and damage tolerance of composite sandwich structures. A low-cost, out-of-autoclave processing method was developed to produce composite sandwich panels with carbon fiber face sheets, a closed-cell foam core, and through-the-thickness Kevlar stitching. The sandwich panels were stitched in a dry preform state, vacuum bagged, and infiltrated using Vacuum Assisted Resin Transfer Molding (VARTM) processing. For comparison purposes, unstitched sandwich panels were produced using the same materials and manufacturing methodology. Test panels were produced initially at the University of Utah and later at NASA Langley Research Center. Four types of mechanical tests were performed: flexural testing, flatwise tensile testing, core shear testing, and edgewise compression testing. Drop-weight impact testing followed by specimen sectioning was performed to characterize the damage resistance of stitched sandwich panels. Compression after impact (CAI) testing was performed to evaluate the damage tolerance of the sandwich panels. Results show significant increases in the flexural stiffness and strength, out-of-plane tensile strength, core shear strength, edgewise compression strength, and compression-after-impact strength of stitched sandwich structures.

Department of Physics' Involvement of the Impact Testing Project of the High Speed Civil Transport Program (HSCT)

NASA Technical Reports Server (NTRS)

VonMeerwall, Ernst D.

1994-01-01

The project involved the impact testing of a kevlar-like woven polymer material, PBO. The purpose was to determine whether this material showed any promise as a lightweight replacement material for jet engine fan containment. The currently used metal fan containment designs carry a high drag penalty due to their weight. Projectiles were fired at samples of PBO by means of a 0.5 inch diameter Helium powered gun. The Initial plan was to encase the samples inside a purpose-built steel "hot box" for heating and ricochet containment. The research associate's responsibility was to develop the data acquisition programs and techniques necessary to determine accurately the impacting projectile's velocity. Beyond this, the Research Associate's duties include any physical computations, experimental design, and data analysis necessary.

Evaluation of the impact of noise metrics on tiltrotor aircraft design

NASA Technical Reports Server (NTRS)

Sternfeld, H.; Spencer, R.; Ziegenbein, P.

1995-01-01

A subjective noise evaluation was conducted in which the test participants evaluated the annoyance of simulated sounds representative of future civil tiltrotor aircraft. The subjective responses were correlated with the noise metrics of A-weighted sound pressure level, overall sound pressure level, and perceived level. The results indicated that correlation between subjective response and A-weighted sound pressure level is considerably enhanced by combining it in a multiple regression with overall sound pressure level. As a single metric, perceived level correlated better than A-weighted sound pressure level due to greater emphasis on low frequency noise components. This latter finding was especially true for indoor noise where the mid and high frequency noise components are attenuated by typical building structure. Using the results of the subjective noise evaluation, the impact on tiltrotor aircraft design was also evaluated. While A-weighted sound pressure level can be reduced by reduction in tip speed, an increase in number of rotor blades is required to achieve significant reduction of low frequency noise as measured by overall sound pressure level. Additional research, however, is required to achieve comparable reductions in impulsive noise due to blade-vortex interaction, and also to achieve reduction in broad band noise.

Impact Delamination and Fracture in Aluminum/Acrylic Sandwich Plates

NASA Technical Reports Server (NTRS)

Liaw, Benjamin; Zeichner, Glenn; Liu, Yanxiong; Bowles, Kenneth J. (Technical Monitor)

2000-01-01

Impact-induced delamination and fracture in 6061-T6 aluminum/cast acrylic sandwich plates adhered by epoxy were generated in an instrumented drop-weight impact machine. Although only a small dent was produced on the aluminum side when a hemispherical penetrator tup was dropped onto it from a couple of inches, a large ring of delamination at the interface was observed. The delamination damage was often accompanied by severe shattering in the acrylic substratum. Damage patterns in the acrylic layer include radial and ring cracks and, together with delamination at the interface, may cause peeling-off of acrylic material from the sandwich plate. Theory of stress-wave propagation can be used to explain these damage patterns. The impact tests were conducted at various temperatures. The results also show clearly that temperature effect is very important in impact damage. For pure cast acrylic nil-ductile transition (NDT) occurs between 185-195 F. Excessive impact energy was dissipated into fracture energy when tested at temperature below this range or through plastic deformation when tested at temperature above the NDT temperature. Results from this study will be used as baseline data for studying fiber-metal laminates, such as GLARE and ARALL for advanced aeronautical and astronautical applications.

The source and impact of appearance teasing: an examination by sex and weight status among early adolescents from the Czech Republic.

PubMed

Almenara, Carlos A; Ježek, Stanislav

2015-03-01

Some adolescents are victims of negative appearance-related feedback, and this may have lasting adverse effects on their self-evaluation. The aim of this study was to examine the frequency and impact of appearance teasing across sex and weight status. The participants were 570 Czech adolescents (47.9% girls) evaluated at age 13 during the European Longitudinal Study of Pregnancy and Childhood. Instruments used were body mass index and an adapted version of the Physical Experiences Survey that measures appearance teasing sources (parents, peers, among others), body part teased, and the impact of teasing. Chi-square test and multivariate analyses of variance were conducted to compare groups by sex and weight status. Logistic regression was then used for adjusted analyses. Girls were more likely to report appearance teasing than boys. Overweight adolescents, both girls and boys, were more likely to be teased than non-overweight adolescents. Overweight adolescents compared with non-overweight adolescents reported higher levels of impact of body-related teasing. Czech adolescents continue to adopt the societal standards of Western countries, stigmatizing overweight peers. This may affect more obese adolescents. Future research has to evaluate different sources of appearance-related teasing. Interventions in schools are suitable for the reduction of appearance-related prejudices. © 2015, American School Health Association.

Comparison of the inertial properties and forces required to initiate movement for three gait trainers.

PubMed

Paleg, Ginny; Huang, Morris; Vasquez Gabela, Stephanie C; Sprigle, Stephen; Livingstone, Roslyn

2016-01-01

The purpose of this study was to evaluate the inertial properties and forces required to initiate movement on two different surfaces in a sample of three commonly prescribed gait trainers. Tests were conducted in a laboratory setting to compare the Prime Engineering KidWalk, Rifton Pacer, and Snug Seat Mustang with and without a weighted anthropometric test dummy configured to the weight and proportions of a 4-year-old child. The Pacer was the lightest and the KidWalk the heaviest while footprints of the three gait trainers were similar. Weight was borne fairly evenly on the four casters of the Pacer and Mustang while 85% of the weight was borne on the large wheels of the mid-wheel drive KidWalk. These differences in frame style, wheel, and caster style and overall mass impact inertial properties and forces required to initiate movement. Test results suggest that initiation forces on tile were equivalent for the Pacer and KidWalk while the Mustang had the highest initiation force. Initiation forces on carpet were lowest for the KidWalk and highest for the Mustang. This initial study of inertia and movement initiation forces may provide added information for clinicians to consider when selecting a gait trainer for their clients.

Examining behavioral processes through which lifestyle interventions promote weight loss: results from PREMIER.

PubMed

Fitzpatrick, Stephanie L; Bandeen-Roche, Karen; Stevens, Victor J; Coughlin, Janelle W; Rubin, Richard R; Brantley, Phillip J; Funk, Kristine L; Svetkey, Laura P; Jerome, Gerald J; Dalcin, Arlene; Charleston, Jeanne; Appel, Lawrence J

2014-04-01

To examine the behavioral processes through which lifestyle interventions impacted weight loss. The analyses were limited to overweight and obese Black and White adults randomized to a PREMIER lifestyle intervention (N = 501). Structural equation modeling was conducted to test the direct and indirect relationships of session attendance, days of self-monitoring diet and exercise, change in diet composition and exercise, and 6-month weight change. Greater session attendance was associated with increased self-monitoring, which was in turn significantly related to reduction in percent energy from total fat consumed. Change in percent energy from fat and self-monitoring was associated with 6-month percent change in weight. Both a decrease in fat intake and increase in self-monitoring are potential mediators of the relationship between attendance and weight change. The findings provide a reasonable model that suggests regular session attendance and use of behavioral strategies like self-monitoring are associated with improved behavioral outcomes that are associated with weight loss. Copyright © 2013 The Obesity Society.

Comprehensive Group Therapy of Obesity and Its Impact on Selected Anthropometric and Postural Parameters.

PubMed

Horák, Stanislav; Sovová, Eliška; Pastucha, Dalibor; Konečný, Petr; Radová, Lenka; Calabová, Naděžda; Janoutová, Jana; Janout, Vladimír

2017-12-01

Obesity is a multifactorial disease. This non-infectious epidemic has reached pandemic proportions in the 21 century. Posture is a dynamic process referring to an active maintenance of body movement segments against the action of external forces. The aim of the study was to investigate the effect of comprehensive group therapy for obese persons on selected anthropometric and postural parameters. The study comprised 53 females with a mean age of 44.5 years (range 29–65 years, standard deviation 9.42 years, median 44 years), who completed a controlled weight loss programme. At the beginning and at the end of the programme, anthropometric parameters (Body Mass Index (BMI), weight and waist circumference) were measured and the posturography tests Limits of Stability (LOS) and Motor Control Test (MCT) were performed using the NeuroCom's SMART EquiTest system. The data were statistically analyzed using R software at a level of significance of 0.05. There were positive changes after the controlled weight loss programme in anthropometric parameters (BMI reduction, with p<0.001; waist circumference reduction, with p<0.001; and weight loss, with p<0.001), postural stability with statistically significant (p<0.05) improvements in both postural activity (LOS test parameters) and reactions (MCT parameters). The study showed a statistically significant effect of comprehensive group therapy for obesity in terms of reductions in waist circumference, body weight and BMI, and thus the overall reduction of both cardiovascular and metabolic risks, as well as improved postural skills (activity and reactions). Copyright© by the National Institute of Public Health, Prague 2017

Biomolecular Materials. Materials Research Society Symposium Proceedings Held in Boston, Massachusetts on December 1-3, 1992. Volume 292

DTIC Science & Technology

1992-12-03

and thereby eliminating some of the poaching pressures on the animal populations. This could impact significantly on their survival and possibly remove...purposes, might help alleviate the pressure on the rhino population due to poaching . We are investigating this possibility. The structure of the rhino ...skate boards! Sdrnples cut from the coconut shell were tested in impact using a weight swinging on a pendulum and at low loading rates in three-point

Open hole and post-impact compression fatigue of stitched and unstitched carbon/epoxy composites

NASA Technical Reports Server (NTRS)

Portanova, M. A.; Poe, C. C., Jr.; Whitcomb, John D.

1990-01-01

The performance is studied of a stitched uniweave fabric composite and that of a toughened tape composite. The effects of stitching on compression fatigue life are addressed. Post impact compression fatigue and open hole fatigue tests were run on an AS4/3501-6 uniweave with stitching and a toughened IM7/8551-7 tape without stitching. Stitching was found to increase the thickness and consequently the weight of the composite material. The two materials were compared on an equal carbon content basis as well as on an equal weight basis. The excess thickness in the stitched uniweave composite was responsible for the lower fatigue life, on an equal carbon basis, compared to the toughened resin tape composite. Comparison of fatigue lives on an equal carbon content basis indicated that puncture or crimp type damage from stitching has very little effect on compression failure. Post impact fatigue test showed that although the damage area in the stitched uniweave composite was twice that of the toughened tape composite, the fatigue lives of the stitched composite were significantly longer than those of the toughened composite. Thus, it appears that the increase in thickness from stitching is much more of a penalty than crimped fibers or puncture type damage from stitching.

Pedestrian headform testing: inferring performance at impact speeds and for headform masses not tested, and estimating average performance in a range of real-world conditions.

PubMed

Hutchinson, T Paul; Anderson, Robert W G; Searson, Daniel J

2012-01-01

Tests are routinely conducted where instrumented headforms are projected at the fronts of cars to assess pedestrian safety. Better information would be obtained by accounting for performance over the range of expected impact conditions in the field. Moreover, methods will be required to integrate the assessment of secondary safety performance with primary safety systems that reduce the speeds of impacts. Thus, we discuss how to estimate performance over a range of impact conditions from performance in one test and how this information can be combined with information on the probability of different impact speeds to provide a balanced assessment of pedestrian safety. Theoretical consideration is given to 2 distinct aspects to impact safety performance: the test impact severity (measured by the head injury criterion, HIC) at a speed at which a structure does not bottom out and the speed at which bottoming out occurs. Further considerations are given to an injury risk function, the distribution of impact speeds likely in the field, and the effect of primary safety systems on impact speeds. These are used to calculate curves that estimate injuriousness for combinations of test HIC, bottoming out speed, and alternative distributions of impact speeds. The injuriousness of a structure that may be struck by the head of a pedestrian depends not only on the result of the impact test but also the bottoming out speed and the distribution of impact speeds. Example calculations indicate that the relationship between the test HIC and injuriousness extends over a larger range than is presently used by the European New Car Assessment Programme (Euro NCAP), that bottoming out at speeds only slightly higher than the test speed can significantly increase the injuriousness of an impact location and that effective primary safety systems that reduce impact speeds significantly modify the relationship between the test HIC and injuriousness. Present testing regimes do not take fully into account the relationship between impact severity and variations in impact conditions. Instead, they assess injury risk at a single impact speed. Hence, they may fail to differentiate risks due to the effects of bottoming out under different impact conditions. Because the level of injuriousness changes across a wide range of HIC values, even slight improvements to very stiff structures need to be encouraged through testing. Indications are that the potential of autonomous braking systems is substantial and needs to be weighted highly in vehicle safety assessments.

Reduced Reward-driven Eating Accounts for the Impact of a Mindfulness-Based Diet and Exercise Intervention on Weight Loss: Data from the SHINE Randomized Controlled Trial

PubMed Central

Mason, Ashley E.; Epel, Elissa S.; Aschbacher, Kirstin; Lustig, Robert H.; Acree, Michael; Kristeller, Jean; Cohn, Michael; Dallman, Mary; Moran, Patricia J.; Bacchetti, Peter; Laraia, Barbara; Hecht, Frederick M.; Daubenmier, Jennifer

2016-01-01

Many individuals with obesity report overeating despite intentions to maintain or lose weight. Two barriers to long-term weight loss are reward-driven eating, which is characterized by a lack of control over eating, a preoccupation with food, and a lack of satiety; and psychological stress. Mindfulness training may address these barriers by promoting awareness of hunger and satiety cues, self-regulatory control, and stress reduction. We examined these two barriers as potential mediators of weight loss in the Supporting Health by Integrating Nutrition and Exercise (SHINE) randomized controlled trial, which compared the effects of a 5.5-month diet and exercise intervention with or without mindfulness training on weight loss among adults with obesity. Intention-to-treat multiple mediation models tested whether post-intervention reward-driven eating and psychological stress mediated the impact of intervention arm on weight loss at 12-and 18-months post-baseline among 194 adults with obesity (BMI: 30–45). Mindfulness (relative to control) participants had significant reductions in reward-driven eating at 6 months (post-intervention), which, in turn, predicted weight loss at 12 months. Post-intervention reward-driven eating mediated 47.1% of the total intervention arm effect on weight loss at 12 months [β=-0.06, SE(β)=0.03, p=.030, 95% CI (−0.12, −0.01)]. This mediated effect was reduced when predicting weight loss at 18 months (p=.396), accounting for 23.0% of the total intervention effect, despite similar weight loss at 12 months. Psychological stress did not mediate the effect of intervention arm on weight loss at 12 or 18 months. In conclusion, reducing reward-driven eating, which can be achieved using a diet and exercise intervention that includes mindfulness training, may promote weight loss (clinicaltrials.gov registration: NCT00960414). PMID:26867697

Reduced reward-driven eating accounts for the impact of a mindfulness-based diet and exercise intervention on weight loss: Data from the SHINE randomized controlled trial.

PubMed

Mason, Ashley E; Epel, Elissa S; Aschbacher, Kirstin; Lustig, Robert H; Acree, Michael; Kristeller, Jean; Cohn, Michael; Dallman, Mary; Moran, Patricia J; Bacchetti, Peter; Laraia, Barbara; Hecht, Frederick M; Daubenmier, Jennifer

2016-05-01

Many individuals with obesity report over eating despite intentions to maintain or lose weight. Two barriers to long-term weight loss are reward-driven eating, which is characterized by a lack of control over eating, a preoccupation with food, and a lack of satiety; and psychological stress. Mindfulness training may address these barriers by promoting awareness of hunger and satiety cues, self-regulatory control, and stress reduction. We examined these two barriers as potential mediators of weight loss in the Supporting Health by Integrating Nutrition and Exercise (SHINE) randomized controlled trial, which compared the effects of a 5.5-month diet and exercise intervention with or without mindfulness training on weight loss among adults with obesity. Intention-to-treat multiple mediation models tested whether post-intervention reward-driven eating and psychological stress mediated the impact of intervention arm on weight loss at 12- and 18-months post-baseline among 194 adults with obesity (BMI: 30-45). Mindfulness (relative to control) participants had significant reductions in reward-driven eating at 6 months (post-intervention), which, in turn, predicted weight loss at 12 months. Post-intervention reward-driven eating mediated 47.1% of the total intervention arm effect on weight loss at 12 months [β = -0.06, SE(β) = 0.03, p = .030, 95% CI (-0.12, -0.01)]. This mediated effect was reduced when predicting weight loss at 18 months (p = .396), accounting for 23.0% of the total intervention effect, despite similar weight loss at 12 months. Psychological stress did not mediate the effect of intervention arm on weight loss at 12 or 18 months. In conclusion, reducing reward-driven eating, which can be achieved using a diet and exercise intervention that includes mindfulness training, may promote weight loss (clinicaltrials.gov registration: NCT00960414). Published by Elsevier Ltd.

Associations of lifetime walking and weight bearing exercise with accelerometer-measured high impact physical activity in later life.

PubMed

Elhakeem, Ahmed; Hannam, Kimberly; Deere, Kevin C; Hartley, April; Clark, Emma M; Moss, Charlotte; Edwards, Mark H; Dennison, Elaine; Gaysin, Tim; Kuh, Diana; Wong, Andrew; Fox, Kenneth R; Cooper, Cyrus; Cooper, Rachel; Tobias, Jon H

2017-12-01

High impact physical activity (PA) is thought to benefit bone. We examined associations of lifetime walking and weight bearing exercise with accelerometer-measured high impact and overall PA in later life. Data were from 848 participants (66.2% female, mean age = 72.4 years) from the Cohort for Skeletal Health in Bristol and Avon, Hertfordshire Cohort Study and MRC National Survey of Health and Development. Acceleration peaks from seven-day hip-worn accelerometer recordings were used to derive counts of high impact and overall PA. Walking and weight bearing exercise up to age 18, between 18-29, 30-49 and since age 50 were recalled using questionnaires. Responses in each age category were dichotomised and cumulative scores derived. Linear regression was used for analysis. Greater lifetime walking was related to higher overall, but not high impact PA, whereas greater lifetime weight bearing exercise was related to higher overall and high impact PA. For example, fully-adjusted differences in log-overall and log-high impact PA respectively for highest versus lowest lifetime scores were: walking [0.224 (0.087, 0.362) and 0.239 (- 0.058, 0.536)], and weight bearing exercise [0.754 (0.432, 1.076) and 0.587 (0.270, 0.904)]. For both walking and weight bearing exercise, associations were strongest in the 'since age 50' category. Those reporting the most walking and weight bearing exercise since age 50 had highest overall and high impact PA, e.g. fully-adjusted difference in log-high impact PA versus least walking and weight bearing exercise = 0.588 (0.226, 0.951). Promoting walking and weight bearing exercise from midlife may help increase potentially osteogenic PA levels in later life.

Studies of the Ecological Impact of Repetitive Aerial Applications of Herbicides on the Ecosystem of Test Area C-52A, Eglin AFB, Florida

DTIC Science & Technology

1975-08-01

mosquito Beuthss. Microbiology . Effluents. control was rettlizcd using niosquito fish Identifiers: ’Water pollution effects(Arsimals)- Identifiers...support differences between the control and tesi , animals. It is interesting to note the magnitude of the standard deviations between spleen weights from

Construction and Analysis of Educational Assessments Using Knowledge Maps with Weight Appraisal of Concepts

ERIC Educational Resources Information Center

Su, C. Y.; Wang, T. I.

2010-01-01

The rapid advance of information and communication technologies (ICT) has important impacts on teaching and learning, as well as on the educational assessment. Teachers may create assessments utilizing some developed assessment software or test authoring tools. However, problems could occur, such as neglecting key concepts in the curriculum or…

Effects of OCR Errors on Ranking and Feedback Using the Vector Space Model.

ERIC Educational Resources Information Center

Taghva, Kazem; And Others

1996-01-01

Reports on the performance of the vector space model in the presence of OCR (optical character recognition) errors in information retrieval. Highlights include precision and recall, a full-text test collection, smart vector representation, impact of weighting parameters, ranking variability, and the effect of relevance feedback. (Author/LRW)

Rapid detection and identification of pedestrian impacts using a distributed sensor network

NASA Astrophysics Data System (ADS)

Kim, Andrew C.; Chang, Fu-Kuo

2005-05-01

Pedestrian fatalities from automobile accidents often occur as a result of head injuries suffered from impacts with an automobile front end. Active pedestrian protection systems with proper pedestrian recognition algorithms can protect pedestrians from such head trauma. An investigation was conducted to assess the feasibility of using a network of piezoelectric sensors mounted on the front bumper beam of an automobile to discriminate between impacts with "pedestrian" and "non-pedestrian" objects. This information would be used to activate a safety device (e.g., external airbag or pop-up hood) to provide protection for the vulnerable pedestrian. An analytical foundation for the object-bumper impact problem will be presented, as well as the classical beam impact theory. The mechanical waves that propagate in the structure from an external impact contain a wealth of information about the specifics of a particular impact -- object mass, size, impact speed, etc. -- but most notably the object stiffness, which identifies the impacted object. Using the frequency content of the sensor signals, it can be shown that impacts with a "pedestrian" object of varying size, weight, and speed can be easily differentiated from impacts with other "non-pedestrian" objects. Simulation results will illustrate this phenomenon, and experimental tests will verify the results. A comprehensive series of impact tests were performed for validation, using both a stationary front bumper with a drop-pendulum impactor and a moving car with stationary impact objects. Results from both tests will be presented.

The development of thermoplastic fibre based reinforcements for the rotational moulding process

NASA Astrophysics Data System (ADS)

Alemán, D. N. Castellanos; McCourt, M.; Kearns, M. P.; Martin, P. J.; Butterfield, J.

2018-05-01

Rotational moulding is a method used to produce hollow plastic parts through the heating, melting and cooling of polymer powder within a metal mould. A wide range of products are made using this process, such as fluid containment tanks, boats, light weight vehicle bodies and marine buoys. Rotomoulded composites using thermoplastic fibres are of increasing interest to the industry, as they have the potential to significantly improve impact strength, whilst reducing part weight, resulting in a structure that is 100% recyclable compared to a traditional composite. A series of self-reinforced thermoplastic weaves can be used to produce a number of composite structures using the rotational moulding process. This work outlines the improvements obtained from the range of rotomoulded composites structures, as well as preforms that could be used in future rotational moulding work. Characteristics of self-reinforced materials were exploited with the aim of increasing the mechanical properties, preserving the weaves and increasing the nature of the material adhesion. Addition of the fabrics in the cooling stage was shown to be of great interest as this avoided exposure of the material to the peak temperature, which may affect the integrity of the fabric. Placing the weave during cooling was useful as the material could receive the maximum amount of tensile force during the impact test. A total of nine diverse types of compounds were manufactured and tested, with seven of the impact tests showing an increase in strength greater than 50%.

Hypervelocity Impact Performance of Open Cell Foam Core Sandwich Panel Structures

NASA Technical Reports Server (NTRS)

Ryan, Shannon; Christiansen, Eric; Lear, Dana

2009-01-01

Metallic foams are a relatively new class of materials with low density and novel physical, mechanical, thermal, electrical and acoustic properties. Although incompletely characterized, they offer comparable mechanical performance to traditional spacecraft structural materials (i.e. honeycomb sandwich panels) without detrimental through-thickness channeling cells. There are two competing types of metallic foams: open cell and closed cell. Open cell foams are considered the more promising technology due to their lower weight and higher degree of homogeneity. Leading micrometeoroid and orbital debris shields (MMOD) incorporate thin plates separated by a void space (i.e. Whipple shield). Inclusion of intermediate fabric layers, or multiple bumper plates have led to significant performance enhancements, yet these shields require additional non-ballistic mass for installation (fasteners, supports, etc.) that can consume up to 35% of the total shield weight [1]. Structural panels, such as open cell foam core sandwich panels, that are also capable of providing sufficient MMOD protection, represent a significant potential for increased efficiency in hypervelocity impact shielding from a systems perspective through a reduction in required non-ballistic mass. In this paper, the results of an extensive impact test program on aluminum foam core sandwich panels are reported. The effect of pore density, and core thickness on shielding performance have been evaluated over impact velocities ranging from 2.2 - 9.3 km/s at various angles. A number of additional tests on alternate sandwich panel configurations of comparable-weight have also been performed, including aluminum honeycomb sandwich panels (see Figure 1), Nomex honeycomb core sandwich panels, and 3D aluminum honeycomb sandwich panels. A total of 70 hypervelocity impact tests are reported, from which an empirical ballistic limit equation (BLE) has been derived. The BLE is in the standard form suitable for implementation in risk analysis software, and includes the effect of panel thickness, core density, and facesheet material properties. A comparison between the shielding performance of foam core sandwich panel structures and common MMOD shielding configurations is made for both conservative (additional 35% non-ballistic mass) and optimistic (additional mass equal to 30% of bumper mass) considerations. Suggestions to improve the shielding performance of foam core sandwich panels are made, including the use of outer mesh layers, intermediate fabric/composite layers, and varying pore density.

Air jet erosion test on plasma sprayed surface by varying erodent impingement pressure and impingement angle

NASA Astrophysics Data System (ADS)

Behera, Ajit; Behera, Asit; Mishra, S. C.; Pani, S.; Parida, P.

2015-02-01

Fly-ash premixed with quartz and illmenite powder in different weight proportions are thermal sprayed on mild steel and copper substrates at various input power levels of the plasma torch ranging from 11 kW to 21 kW DC. The erosion test has done using Air Jet erosion test Reg (As per ASTM G76) with silica erodent typically 150-250 pm in size. Multiple tests were performed at increasing the time duration from 60 sec to 180 sec with increasing pressure (from 1 bar to 2.5 bar) and angle (60° & 90°). This study reveals that the impact velocity and impact angle are two most significant parameters among various factors influencing the wear rate of these coatings. The mechanisms and microstructural changes that arise during erosion wear are studied by using SEM. It is found that, when erodent are impacting the fresh un-eroded surface, material removal occurs by the continuous evolution of craters on the surface. Upper layer splats are removed out after 60 sec and second layer splat erosion starts. Based on these observations Physical models are developed. Some graphs plotted between mass loss-rate versus time period/impact Pressure/impact Angle gives good correlation with surface features observed.

The effect of the impactor diameter and temperature on low velocity impact behavior of CFRP laminates

NASA Astrophysics Data System (ADS)

Evci, C.; Uyandıran, I.

2017-02-01

Impact damage is one of the major concerns that should be taken into account with the new aircraft and spacecraft structures which employ ever-growing use of composite materials. Considering the thermal loads encountered at different altitudes, both low and high temperatures can affect the properties and impact behavior of composite materials. This study aims to investigate the effect of temperature and impactor diameter on the impact behavior and damage development in balanced and symmetrical CFRP laminates which were manufactured by employing vacuum bagging process with autoclave cure. Instrumented drop-weight impact testing system is used to perform the low velocity impact tests in a range of temperatures ranged from 60 down to -50 °C. Impact tests for each temperature level were conducted using three different hemispherical impactor diameters varying from 10 to 20 mm. Energy profile method is employed to determine the impact threshold energies for damage evolution. The level of impact damage is determined from the dent depth on the impacted face and delamination damage detected using ultrasonic C-Scan technique. Test results reveal that the threshold of penetration energy, main failure force and delamination area increase with impactor diameter at all temperature levels. No clear influence of temperature on the critical force thresholds could be derived. However, penetration threshold energy decreased as the temperature was lowered. Drop in the penetration threshold was more obvious with quite low temperatures. Delamination damage area increased while the temperature decreased from +60 °C to -50 °C.

Integrating a family-focused approach into child obesity prevention: Rationale and design for the My Parenting SOS study randomized control trial

PubMed Central

2011-01-01

Background More than 20% of US children ages 2-5 yrs are classified as overweight or obese. Parents greatly influence the behaviors their children adopt, including those which impact weight (e.g., diet and physical activity). Unfortunately, parents often fail to recognize the risk for excess weight gain in young children, and may not be motivated to modify behavior. Research is needed to explore intervention strategies that engage families with young children and motivate parents to adopt behaviors that will foster healthy weight development. Methods This study tests the efficacy of the 35-week My Parenting SOS intervention. The intervention consists of 12 sessions: initial sessions focus on general parenting skills (stress management, effective parenting styles, child behavior management, coparenting, and time management) and later sessions apply these skills to promote healthier eating and physical activity habits. The primary outcome is change in child percent body fat. Secondary measures assess parent and child dietary intake (three 24-hr recalls) and physical activity (accelerometry), general parenting style and practices, nutrition- and activity-related parenting practices, and parent motivation to adopt healthier practices. Discussion Testing of these new approaches contributes to our understanding of how general and weight-specific parenting practices influence child weight, and whether or not they can be changed to promote healthy weight trajectories. Trial Registration ClinicalTrials.gov: NCT00998348 PMID:21639940

Integrating a family-focused approach into child obesity prevention: rationale and design for the My Parenting SOS study randomized control trial.

PubMed

Ward, Dianne S; Vaughn, Amber E; Bangdiwala, Kant I; Campbell, Marci; Jones, Deborah J; Panter, Abigail T; Stevens, June

2011-06-05

More than 20% of US children ages 2-5 yrs are classified as overweight or obese. Parents greatly influence the behaviors their children adopt, including those which impact weight (e.g., diet and physical activity). Unfortunately, parents often fail to recognize the risk for excess weight gain in young children, and may not be motivated to modify behavior. Research is needed to explore intervention strategies that engage families with young children and motivate parents to adopt behaviors that will foster healthy weight development. This study tests the efficacy of the 35-week My Parenting SOS intervention. The intervention consists of 12 sessions: initial sessions focus on general parenting skills (stress management, effective parenting styles, child behavior management, coparenting, and time management) and later sessions apply these skills to promote healthier eating and physical activity habits. The primary outcome is change in child percent body fat. Secondary measures assess parent and child dietary intake (three 24-hr recalls) and physical activity (accelerometry), general parenting style and practices, nutrition- and activity-related parenting practices, and parent motivation to adopt healthier practices. Testing of these new approaches contributes to our understanding of how general and weight-specific parenting practices influence child weight, and whether or not they can be changed to promote healthy weight trajectories. ClinicalTrials.gov: NCT00998348.

Non-Destructive Thermography Analysis of Impact Damage on Large-Scale CFRP Automotive Parts.

PubMed

Maier, Alexander; Schmidt, Roland; Oswald-Tranta, Beate; Schledjewski, Ralf

2014-01-14

Laminated composites are increasingly used in aeronautics and the wind energy industry, as well as in the automotive industry. In these applications, the construction and processing need to fulfill the highest requirements regarding weight and mechanical properties. Environmental issues, like fuel consumption and CO₂-footprint, set new challenges in producing lightweight parts that meet the highly monitored standards for these branches. In the automotive industry, one main aspect of construction is the impact behavior of structural parts. To verify the quality of parts made from composite materials with little effort, cost and time, non-destructive test methods are increasingly used. A highly recommended non-destructive testing method is thermography analysis. In this work, a prototype for a car's base plate was produced by using vacuum infusion. For research work, testing specimens were produced with the same multi-layer build up as the prototypes. These specimens were charged with defined loads in impact tests to simulate the effect of stone chips. Afterwards, the impacted specimens were investigated with thermography analysis. The research results in that work will help to understand the possible fields of application and the usage of thermography analysis as the first quick and economic failure detection method for automotive parts.

Evaluation of the Personal Impact Health Assessment Questionnaire (PI HAQ) to capture the impact of disability in osteoarthritis.

PubMed

Wylde, Vikki; Livesey, Christine; Learmonth, Ian D; Blom, Ashley W; Hewlett, Sarah

2010-06-01

Measuring facts about disability may not reflect their personal impact. An individualized values instrument has been used to weight difficulty in performing activities of daily living in rheumatoid arthritis, and calculate personal impact (Personal Impact Health Assessment Questionnaire; PI HAQ). This study aimed to evaluate the PI HAQ in osteoarthritis (OA). Study 1: 51 people with OA completed short and long versions of the value instrument at 0 and 1 week. Study 2: 116 people with OA completed the short value instrument, disability and psychological measures at 0 and 4 weeks. Study 1: The eight-category and 20-item value instruments correlated well (r = 0.85) and scores differed by just 2.7%. The eight-category instrument showed good internal consistency reliability (Cronbach's alpha = 0.85) and moderate one-week test-retest reliability (r = 0.68, Wilcoxon signed-rank test p = 0.16, intra-class correlation coefficient [ICC] 0.62). Study 2: Values for disability were not associated with disability severity or clinical status. After weighting disability by value, the resulting PI HAQ scores were significantly associated with dissatisfaction with disability, perceived increase in disability, poor clinical status and life dissatisfaction, and differed significantly between people with high and low clinical status (convergent and discriminant construct validity). There was moderate association with the disease repercussion profile disability subscale (r = 0.511; p < 0.001) (criterion validity). The PI HAQ was stable over four weeks (ICC 0.81). These studies provide an initial evaluation of an instrument to measure the personal impact of disability in people with OA, setting disability within a personal context. Further studies, including sensitivity to change, are required.

Effect of Long Term Low-Level Gamma Radiation on Thermal Sensitivity of RDX/HMX Mixtures

DTIC Science & Technology

1976-11-01

1.1x10 R. It was concluded that the slight exothermic reaction before the 3^6 HMX polymorphic transition could be caused by a radiation-induced...Radiation on Thermal Sensitivity of RDX / HMX Mixtures 5. TYPE OF REPORT 4 PERIOD COVERED Final Report 6. PERFORMING ORG. REPORT NUMBER 7...and Identity by block number) Gamma radiation Weight loss HMX Impact sensitivity test RDX Vacuum stability test DTA Infrared spectrometry TGA

Modelling low velocity impact induced damage in composite laminates

NASA Astrophysics Data System (ADS)

Shi, Yu; Soutis, Constantinos

2017-12-01

The paper presents recent progress on modelling low velocity impact induced damage in fibre reinforced composite laminates. It is important to understand the mechanisms of barely visible impact damage (BVID) and how it affects structural performance. To reduce labour intensive testing, the development of finite element (FE) techniques for simulating impact damage becomes essential and recent effort by the composites research community is reviewed in this work. The FE predicted damage initiation and propagation can be validated by Non Destructive Techniques (NDT) that gives confidence to the developed numerical damage models. A reliable damage simulation can assist the design process to optimise laminate configurations, reduce weight and improve performance of components and structures used in aircraft construction.

Effect of weight reduction on quality of life and eating behaviors in obese women.

PubMed

Lemoine, Sophie; Rossell, Nadia; Drapeau, Vicky; Poulain, Magali; Garnier, Sophie; Sanguignol, Frédéric; Mauriège, Pascale

2007-01-01

To examine the impact of a 3-week weight-reducing program on body composition, physical condition, health-related quality of life, and eating behaviors of sedentary, obese (body mass index, 29-35 kg/m) women, according to menopausal status and menopause duration (<5, >or=5, and >or=10 y). Thirteen premenopausal and 27 postmenopausal women received a dietary plan of 1,400 +/- 200 kcal/day and completed 110-minute endurance exercise 6 days per week. Body mass index, fat mass, lean mass, distance walked in the Six-Minute Walk Test, health-related quality of life estimated by the 36-item Short Form Health Survey (SF-36), and eating behaviors (restriction, disinhibition, and susceptibility to hunger) assessed by the Three-Factor Eating Questionnaire were determined before and after weight reduction. Body mass index and fat mass decreased (P < 0.0001), whereas distance walked increased in both groups after weight reduction (P < 0.001). Although the SF-36 mental component score increased after weight loss in both groups (P < 0.0001), the SF-36 physical component score increased in postmenopausal women only (P < 0.001). Restriction increased (P < 0.0001), whereas disinhibition and susceptibility to hunger decreased after weight reduction (P < 0.001 and P < 0.01, respectively) in both groups. Distance walked and SF-36 physical component score after weight loss were higher in women whose menopause ranged between 5 and 9 years and exceeded 10 years, respectively (P < 0.01). Our study shows that a short-term weight-reducing program combining caloric restriction and physical activity has a favorable impact on women's body composition, physical condition, health-related quality of life, and eating behaviors irrespective of their menopausal status.

Factors Determining Success in Youth Judokas

PubMed Central

Krstulović, Saša; Caput, Petra Đapić

2017-01-01

Abstract The aim of this study was to compare two models of determining factors for success in judo. The first model (Model A) included testing motor abilities of high-level Croatian judokas in the cadet age category. The sample in Model A consisted of 71 male and female judokas aged 16 ± 0.6 years who were divided into four subsamples according to sex and weight category. The second model (Model B) consisted of interviewing 40 top-level judo experts on the importance of motor abilities for cadets’ success in judo. According to Model A, the greatest impact on the criterion variable of success in males and females of heavier weight categories were variables assessing maximum strength, coordination and jumping ability. In the lighter weight male categories, the highest correlation with the criterion variable of success was the variable assessing agility. However, in the lighter weight female categories, the greatest impact on success had the variable assessing muscular endurance. In Model B, specific endurance was crucial for success in judo, while flexibility was the least important, regardless of sex and weight category. Spearman’s rank correlation coefficients showed that there were no significant correlations in the results obtained in Models A and B for all observed subsamples. Although no significant correlations between the factors for success obtained through Models A and B were found, common determinants of success, regardless of the applied model, were identified. PMID:28469759

Does technique matter; a pilot study exploring weighting techniques for a multi-criteria decision support framework.

PubMed

van Til, Janine; Groothuis-Oudshoorn, Catharina; Lieferink, Marijke; Dolan, James; Goetghebeur, Mireille

2014-01-01

There is an increased interest in the use of multi-criteria decision analysis (MCDA) to support regulatory and reimbursement decision making. The EVIDEM framework was developed to provide pragmatic multi-criteria decision support in health care, to estimate the value of healthcare interventions, and to aid in priority-setting. The objectives of this study were to test 1) the influence of different weighting techniques on the overall outcome of an MCDA exercise, 2) the discriminative power in weighting different criteria of such techniques, and 3) whether different techniques result in similar weights in weighting the criteria set proposed by the EVIDEM framework. A sample of 60 Dutch and Canadian students participated in the study. Each student used an online survey to provide weights for 14 criteria with two different techniques: a five-point rating scale and one of the following techniques selected randomly: ranking, point allocation, pairwise comparison and best worst scaling. The results of this study indicate that there is no effect of differences in weights on value estimates at the group level. On an individual level, considerable differences in criteria weights and rank order occur as a result of the weight elicitation method used, and the ability of different techniques to discriminate in criteria importance. Of the five techniques tested, the pair-wise comparison of criteria has the highest ability to discriminate in weights when fourteen criteria are compared. When weights are intended to support group decisions, the choice of elicitation technique has negligible impact on criteria weights and the overall value of an innovation. However, when weights are used to support individual decisions, the choice of elicitation technique influences outcome and studies that use dissimilar techniques cannot be easily compared. Weight elicitation through pairwise comparison of criteria is preferred when taking into account its superior ability to discriminate between criteria and respondents' preferences.

Gene Variants of TCF7L2 Influence Weight Loss and Body Composition During Lifestyle Intervention in a Population at Risk for Type 2 Diabetes

PubMed Central

Haupt, Axel; Thamer, Claus; Heni, Martin; Ketterer, Caroline; Machann, Jürgen; Schick, Fritz; Machicao, Fausto; Stefan, Norbert; Claussen, Claus D.; Häring, Hans-Ulrich; Fritsche, Andreas; Staiger, Harald

2010-01-01

OBJECTIVE The impact of the diabetes risk gene transcription factor 7-like 2 (TCF7L2) on body weight is unclear. As TCF7L2 is expressed in adipose tissue and involved in Wnt-dependent regulation of adipogenesis, we studied the impact of TCF7L2 variants on body composition and weight loss during lifestyle intervention. RESEARCH DESIGN AND METHODS We genotyped 309 German subjects at increased risk for type 2 diabetes for single nucleotide polymorphisms (SNPs) rs7903146, rs12255372, rs11196205, and rs7895340 in TCF7L2 and performed oral glucose tolerance tests before and after a 9-month lifestyle intervention. Fat distribution was quantified using whole-body magnetic resonance imaging/spectroscopy in a subgroup of 210 subjects. RESULTS After adjustment for confounding variables, we observed a negative impact of the type 2 diabetes allele of SNP rs7903146 on change in BMI (P = 0.0034) and on changes in nonvisceral (P = 0.0032) and visceral fat (P = 0.0165) during lifestyle intervention. An association of rs7903146 with lifestyle intervention-induced changes in insulin secretion, glucose concentrations, liver fat, or insulin sensitivity were not detected (all P > 0.2). Essentially the same results were obtained with SNP rs1255372. In contrast, we found no effects of SNPs rs11196205 and rs7895340 on change in BMI (all P ≥ 0.5). CONCLUSIONS Our data reveal that diabetes-associated alleles of TCF7L2 are associated with less weight loss in response to lifestyle intervention. Thus, diabetes-associated TCF7L2 gene variation predicts the success of lifestyle intervention in terms of weight loss and determines individual susceptibility toward environmental factors. PMID:20028944

Factors affecting pelvic and thoracic forces in near-side impact crashes: a study of US-NCAP, NASS, and CIREN data.

PubMed

Tencer, Allan F; Kaufman, Robert; Mack, Christopher; Mock, Charles

2005-03-01

The goal of this study was to identify variables related to vehicle design which are associated with pelvic and thoracic accelerations as measured by the driver's (near side) crash dummy during new car assessment program (NCAP) testing of motor vehicles. Vehicle specific parameters were analyzed using NCAP side impact test results. Data from national automotive sampling system, crashworthiness data system (NASS-CDS) and crash injury research and engineering network (CIREN) (both National Highway Traffic Safety Administration (NHTSA) injury databases) were assessed to confirm NCAP test observations. In addition, door armrest stiffness measurements were performed using a mechanical tester on a sample of 40 vehicles. NCAP data showed that of 10 variables tested using multiple linear regression, vehicle weight and door crush correlated with pelvic acceleration of the driver's crash dummy (overall, r2=0.58, p=0.002, n=165). For thoracic trauma index (TTI) vehicle weight and peak door velocity correlated, significantly (overall, r2=0.41, p=0.03, n=165). Mean TTI was 63.7 g with no side airbag (n=108) and 55.6 g with a thoracic side airbag (n=54), p=0.01. The mean vehicle weight and door crush between airbag and no airbag groups were not significantly different. NASS-CDS data demonstrated a direct relationship between increased door crush and increased abbreviated injury score (AIS). CIREN data showed that occupants who sustained pelvic injuries had a median AIS of 3 with 24.9 cm of door crush, with abdominal injuries, a median AIS of 3 and 30 cm of crush, and with thoracic injuries, a median AIS of 4 and 34 cm of door crush. In addition, the frequency of bilateral pelvic injuries was significantly higher for subjects in CIREN crashes who were in a vehicle with a center console, but only if door intrusion was greater than 15 cm. This information may be useful in design of vehicles with greater protection in side impact crashes.

Finding the keys to successful adult-targeted advertisements on obesity prevention: an experimental audience testing study.

PubMed

Dixon, Helen; Scully, Maree; Durkin, Sarah; Brennan, Emily; Cotter, Trish; Maloney, Sarah; O'Hara, Blythe J; Wakefield, Melanie

2015-08-20

Mass media communications are an important component of comprehensive interventions to address population levels of overweight and obesity, yet we have little understanding of the effective characteristics of specific advertisements (ads) on this topic. This study aimed to quantitatively test audience reactions to existing adult-focused public health television ads addressing overweight and obesity to determine which ads have the highest levels of message acceptance, argument strength, personalised perceived effectiveness and negative emotional impact. 1116 Australian adults aged 21-55 years recruited from a national online panel participated in this web-based study. Quotas were applied to achieve even numbers of males and females, those aged 21-29 years and 30-55 years, and those with a healthy weight (BMI = 18.5-24.9) and overweight/obesity (BMI = 25+). Participants were randomly assigned to view and rate four of eight ads that varied in terms of message content (health consequences, supportive/encouraging or social norms/acceptability) and execution style (graphic, simulation/animation, positive or negative testimonial, or depicted scene). Toxic fat (a graphic, health consequences ad) was the top performing ad on all four outcome measures and was significantly more likely than the other ads tested to promote strong responses in terms of message acceptance, argument strength and negative emotional impact. Measure up (a negative testimonial, health consequences ad) performed comparably on personalised perceived effectiveness. Most ads produced stronger perceptions of personalised perceived effectiveness among participants with overweight/obesity compared to participants with healthy weight. Some ads were more likely to promote strong negative emotions among participants with overweight/obesity. Findings provide preliminary evidence of the most promising content and executional styles of ads that could be pursued as part of obesity prevention campaigns. Ads emphasising the negative health consequences of excess weight appear to elicit stronger cognitive and emotional responses from adults with overweight/obesity. However, careful pre-testing of these types of ads is needed prior to their inclusion in actual campaigns to ensure they do not have unintended negative impacts such as increased stigmatisation of vulnerable individuals and increased levels of body dissatisfaction and/or eating-disordered behaviour among at-risk population sub-groups.

Developing a Danish version of the "Impact on Participation and Autonomy Questionnaire".

PubMed

Ghaziani, Emma; Krogh, Anne Grethe; Lund, Hans

2013-05-01

To translate the "Impact on Participation and Autonomy Questionnaire" into Danish (IPAQ-DK), and estimate its internal consistency and test-retest reliability in order to promote participation-based interventions and research. Translation and two successive reliability assessments through test-retest. 137 adults with varying degrees of impairment; of these, 67 participated in the final reliability assessment. The translation followed guidelines set forth by the "European Group for Quality of Life Assessment and Health Measurement". Internal consistency for subscales was estimated by Chronbach's alpha. Weighted kappa coefficients and intraclass correlation coefficients were calculated to assess the test-retest reliability at item and subscale level, respectively. A preliminary reliability assessment revealed residual issues regarding the translation and cultural adaptation of the instrument. The revised version (IPAQ-DK) was subsequently subjected to a similar assessment demonstrating Chronbach's alpha values from 0.698 to 0.817. Weighted kappa ranged from 0.370 to 0.880; 78% of these values were higher than 0.600. The intraclass correlation coefficient covered values from 0.701 to 0.818. IPAQ-DK is a useful instrument for identifying person-perceived participation restrictions and satisfaction with participation. Further studies of IPAQ-DK's floor/ceiling effects and responsiveness to change are recommended, and whether there is a need for further linguistic improvement of certain items.

Design and Test of an Improved Crashworthiness Small Composite Airframe

NASA Technical Reports Server (NTRS)

Terry, James E.; Hooper, Steven J.; Nicholson, Mark

2002-01-01

The purpose of this small business innovative research (SBIR) program was to evaluate the feasibility of developing small composite airplanes with improved crashworthiness. A combination of analysis and half scale component tests were used to develop an energy absorbing airframe. Four full scale crash tests were conducted at the NASA Impact Dynamics Research Facility, two on a hard surface and two onto soft soil, replicating earlier NASA tests of production general aviation airplanes. Several seat designs and restraint systems including both an air bag and load limiting shoulder harnesses were tested. Tests showed that occupant loads were within survivable limits with the improved structural design and the proper combination of seats and restraint systems. There was no loss of cabin volume during the events. The analysis method developed provided design guidance but time did not allow extending the analysis to soft soil impact. This project demonstrated that survivability improvements are possible with modest weight penalties. The design methods can be readily applied by airplane designers using the examples in this report.

The relationship between weight stigma and eating behavior is explained by weight bias internalization and psychological distress.

PubMed

O'Brien, Kerry S; Latner, Janet D; Puhl, Rebecca M; Vartanian, Lenny R; Giles, Claudia; Griva, Konstadina; Carter, Adrian

2016-07-01

Weight stigma is associated with a range of negative outcomes, including disordered eating, but the psychological mechanisms underlying these associations are not well understood. The present study tested whether the association between weight stigma experiences and disordered eating behaviors (emotional eating, uncontrolled eating, and loss-of-control eating) are mediated by weight bias internalization and psychological distress. Six-hundred and thirty-four undergraduate university students completed an online survey assessing weight stigma, weight bias internalization, psychological distress, disordered eating, along with demographic characteristics (i.e., age, gender, weight status). Statistical analyses found that weight stigma was significantly associated with all measures of disordered eating, and with weight bias internalization and psychological distress. In regression and mediation analyses accounting for age, gender and weight status, weight bias internalization and psychological distress mediated the relationship between weight stigma and disordered eating behavior. Thus, weight bias internalization and psychological distress appear to be important factors underpinning the relationship between weight stigma and disordered eating behaviors, and could be targets for interventions, such as, psychological acceptance and mindfulness therapy, which have been shown to reduce the impact of weight stigma. The evidence for the health consequences resulting from weight stigma is becoming clear. It is important that health and social policy makers are informed of this literature and encouraged develop anti-weight stigma policies for school, work, and medical settings. Copyright © 2016 Elsevier Ltd. All rights reserved.

Impact behaviour of Napier/polyester composites under different energy levels

NASA Astrophysics Data System (ADS)

Fahmi, I.; Majid, M. S. Abdul; Afendi, M.; Haslan, M.; Helmi E., A.; M. Haameem J., A.

2016-07-01

The effects of different energy levels on the impact behaviour of Napier fibre/polyester reinforced composites were investigated. Napier fibre was extracted using traditional water retting process to be utilized as reinforcing materials in polyester composite laminates. 25% fibre loading composite laminates were prepared and impacted at three different energy levels; 2.5,5 and 7.5 J using an instrumented drop weight impact testing machine (IMATEK IM10). The outcomes show that peak force and contact time increase with increased impact load. The energy absorption was then calculated from the force displacement curve. The results indicated that the energy absorption decreases with increasing energy levels of the impact. Impacted specimens were observed visually for fragmentation fracture using an optical camera to identify the failure mechanisms. Fracture fragmentation pattern from permanent dent to perforation with radial and circumferential was observed.

Integrating the effects of salinity on the physiology of the eastern oyster, Crassostrea virginica, in the northern Gulf of Mexico through a Dynamic Energy Budget model

USGS Publications Warehouse

Lavaud, Romain; LaPeyre, Megan K.; Casas, Sandra M.; Bacher, C.; La Peyre, Jerome F.

2017-01-01

We present a Dynamic Energy Budget (DEB) model for the eastern oyster, Crassostrea virginica, which enables the inclusion of salinity as a third environmental variable, on top of the standard foodr and temperature variables. Salinity changes have various effects on the physiology of oysters, potentially altering filtration and respiration rates, and ultimately impacting growth, reproduction and mortality. We tested different hypotheses as to how to include these effects in a DEB model for C. virginica. Specifically, we tested two potential mechanisms to explain changes in oyster shell growth (cm), tissue dry weight (g) and gonad dry weight (g) when salinity moves away from the ideal range: 1) a negative effect on filtration rate and 2) an additional somatic maintenance cost. Comparative simulations of shell growth, dry tissue biomass and dry gonad weight in two monitored sites in coastal Louisiana experiencing salinity from 0 to 28 were statistically analyzed to determine the best hypothesis. Model parameters were estimated through the covariation method, using literature data and a set of specifically designed ecophysiological experiments. The model was validated through independent field studies in estuaries along the northern Gulf of Mexico. Our results suggest that salinity impacts C. virginica’s energy budget predominantly through effects on filtration rate. With an overwhelming number of environmental factors impacting organisms, and increasing exposure to novel and extreme conditions, the mechanistic nature of the DEB model with its ability to incorporate more than the standard food and temperature variables provides a powerful tool to verify hypotheses and predict individual organism performance across a range of conditions.

Development and modeling of multi-phase polymeric origami inspired architecture by using pre-molded geometrical features

NASA Astrophysics Data System (ADS)

Kshad, Mohamed Ali E.; Naguib, Hani E.

2017-02-01

Using Origami folded cores in sandwich structures for lightweight applications has attracted attention in different engineering applications, especially in the applications where the stiffness to weight ratio is a critical design parameter. Recently, common sandwich cores such as honey-comb and foamed cores have been replaced with origami core panels due to their way of force redistribution and energy absorption; these unique characteristics give origami cores high stiffness to weight ratio and high bending and twisting resistance. This paper presents the results of experimental investigations of the effect of base material on the mechanical properties and the impact resistance of Miura-Origami sandwich cores; then, the experimental results are compared with FEA simulation results. The materials used in the study for the origami cores were polymer blends composed of polylactic acid (PLA) and thermoplastic polyurethane (TPU). PLA/TPU blend compositions are (100/0, 80/20, 65/35, 50/50, 20/80, and 0/100) as a weight percentage. The geometrical parameters of the unit cell, base material thickness, and the panel thickness were considered to be constants in this study. The study shows the behavior of the origami cores under impact test and the energy absorbed by the origami folded cores. It was found that 20/80 PLA/TPU blend demonstrated the highest specific energy absorption efficiency both in quasi-static compression and impact tests. Fractured Origami structures were observed to fail at folded edges (creases lines), while the facets exhibit rigid body rotations. The FEM simulation showed a consistency in the impact behavior of the origami cores, and the directional deformational of origami core units which explain the ability of the structure to redistribute the applied force and absorb energy. In this work the origami folded core features were molded directly from the blended material.

Impacts of weighting climate models for hydro-meteorological climate change studies

NASA Astrophysics Data System (ADS)

Chen, Jie; Brissette, François P.; Lucas-Picher, Philippe; Caya, Daniel

2017-06-01

Weighting climate models is controversial in climate change impact studies using an ensemble of climate simulations from different climate models. In climate science, there is a general consensus that all climate models should be considered as having equal performance or in other words that all projections are equiprobable. On the other hand, in the impacts and adaptation community, many believe that climate models should be weighted based on their ability to better represent various metrics over a reference period. The debate appears to be partly philosophical in nature as few studies have investigated the impact of using weights in projecting future climate changes. The present study focuses on the impact of assigning weights to climate models for hydrological climate change studies. Five methods are used to determine weights on an ensemble of 28 global climate models (GCMs) adapted from the Coupled Model Intercomparison Project Phase 5 (CMIP5) database. Using a hydrological model, streamflows are computed over a reference (1961-1990) and future (2061-2090) periods, with and without post-processing climate model outputs. The impacts of using different weighting schemes for GCM simulations are then analyzed in terms of ensemble mean and uncertainty. The results show that weighting GCMs has a limited impact on both projected future climate in term of precipitation and temperature changes and hydrology in terms of nine different streamflow criteria. These results apply to both raw and post-processed GCM model outputs, thus supporting the view that climate models should be considered equiprobable.

The Effect of Temperature and Nanoclay on the Low Velocity and Ballistic Behavior of Woven Glass-Fiber Reinforced Composites

NASA Astrophysics Data System (ADS)

Patrin, Lauren

The objective of this research was to study the effect of nanoclay and temperature on the behavior of woven glass-fabric reinforced epoxy composite under low velocity and ballistic impacts. The materials used in manufacturing the composite were S2 (6181) glass-fibers, epoxy resin (EPON 828), hardener (Epikure 3230), nanoclay and Heloxy 61 modifier. The nanoclay addition was 0%, 1%, 3% and 5% by weight, with respect to the resin. All specimens were manufactured at the City College facilities using vacuum infusion. Tensile tests were conducted to characterize the material and obtain the Young's modulus, ultimate stress, failure strain, Poisson's ratio, shear modulus and shear strength and their variation with nanoclay percentage and temperature. The tests were conducted at room temperature (21°C/70°F), -54°C (-65°F), -20°C (-4°F), 49°C (120°F) and 71°C (160°F). Next composite specimens with 0%, 1%, 3% and 5% nanoclay by weight, with respect to the resin, were subjected to low velocity impact at the previously specified temperatures to determine dynamic force, displacement and energy correlations. The extent of damage was studied using the ultrasound technique. Then ballistic tests were conducted on the nanoclay infused specimens at room temperature to obtain the ballistic limit (V50) and the damage behavior of the composite. The dynamic finite element analysis (FEA) software LS-DYNA was used to model and simulate the results of low velocity impact tests. Good agreement was obtained between experimental and numerical (FEA) results. Analytical analyses were undertaken to compare the results from the tensile experiments. The finite element analysis (FEA) allowed for further analytical comparison of the results. The FEA platform used was LS-DYNA due to its proficient dynamic and damage capabilities in composite materials. The FEA was used to model and simulate the low velocity impacts and compare the results to experiments.

A Circular-Impact Sampler for Forest Litter

Treesearch

Stephen S. Sackett

1971-01-01

Sampling the forest floor to determine litter weight is a tedious, time-consuming job. A new device has been designed and tested at the Southern Forest Fire Laboratory that eliminates many of the past sampling problems. The sampler has been fabricated in two sizes (6- and 12-inch diameters), and these are comparable in accuracy and sampling intensity. This Note...

10 CFR 36.21 - Performance criteria for sealed sources.

Code of Federal Regulations, 2014 CFR

2014-01-01

... to an external pressure (absolute) of 2 million newtons per square meter. (d) Impact. A 2-kilogram steel weight, 2.5 centimeters in diameter, must be dropped from a height of 1 meter onto the test source... from 25 hertz to 500 hertz with a peak amplitude of 5 times the acceleration of gravity. In addition...

10 CFR 36.21 - Performance criteria for sealed sources.

Code of Federal Regulations, 2012 CFR

2012-01-01

... to an external pressure (absolute) of 2 million newtons per square meter. (d) Impact. A 2-kilogram steel weight, 2.5 centimeters in diameter, must be dropped from a height of 1 meter onto the test source... from 25 hertz to 500 hertz with a peak amplitude of 5 times the acceleration of gravity. In addition...

10 CFR 36.21 - Performance criteria for sealed sources.

Code of Federal Regulations, 2013 CFR

2013-01-01

... to an external pressure (absolute) of 2 million newtons per square meter. (d) Impact. A 2-kilogram steel weight, 2.5 centimeters in diameter, must be dropped from a height of 1 meter onto the test source... from 25 hertz to 500 hertz with a peak amplitude of 5 times the acceleration of gravity. In addition...

10 CFR 36.21 - Performance criteria for sealed sources.

Code of Federal Regulations, 2011 CFR

2011-01-01

... to an external pressure (absolute) of 2 million newtons per square meter. (d) Impact. A 2-kilogram steel weight, 2.5 centimeters in diameter, must be dropped from a height of 1 meter onto the test source... from 25 hertz to 500 hertz with a peak amplitude of 5 times the acceleration of gravity. In addition...

Unhealthy weight control behaviours in adolescent girls: a process model based on self-determination theory.

PubMed

Thøgersen-Ntoumani, Cecilie; Ntoumanis, Nikos; Nikitaras, Nikitas

2010-06-01

This study used self-determination theory (Deci, E.L., & Ryan, R.M. (2000). The 'what' and 'why' of goal pursuits: Human needs and the self-determination of behavior. Psychological Inquiry, 11, 227-268.) to examine predictors of body image concerns and unhealthy weight control behaviours in a sample of 350 Greek adolescent girls. A process model was tested which proposed that perceptions of parental autonomy support and two life goals (health and image) would predict adolescents' degree of satisfaction of their basic psychological needs. In turn, psychological need satisfaction was hypothesised to negatively predict body image concerns (i.e. drive for thinness and body dissatisfaction) and, indirectly, unhealthy weight control behaviours. The predictions of the model were largely supported indicating that parental autonomy support and adaptive life goals can indirectly impact upon the extent to which female adolescents engage in unhealthy weight control behaviours via facilitating the latter's psychological need satisfaction.

The Tracking Study: Description of a randomized controlled trial of variations on weight tracking frequency in a behavioral weight loss program

PubMed Central

Linde, Jennifer A.; Jeffery, Robert W.; Crow, Scott J.; Brelje, Kerrin L.; Pacanowski, Carly R.; Gavin, Kara L.; Smolenski, Derek J.

2014-01-01

Observational evidence from behavioral weight control trials and community studies suggests that greater frequency of weighing oneself, or tracking weight, is associated with better weight outcomes. Conversely, it has also been suggested that frequent weight tracking may have a negative impact on mental health and outcomes during weight loss, but there are minimal experimental data that address this concern in the context of an active weight loss program. To achieve the long-term goal of strengthening behavioral weight loss programs, the purpose of this randomized controlled trial (the Tracking Study) is to test variations on frequency of self-weighing during a behavioral weight loss program, and to examine psychosocial and mental health correlates of weight tracking and weight loss outcomes. Three hundred thirty-nine overweight and obese adults were recruited and randomized to one of three variations on weight tracking frequency during a 12-month weight loss program with a 12-month follow-up: daily weight tracking, weekly weight tracking, or no weight tracking. The primary outcome is weight in kilograms at 24 months. The weight loss program integrates each weight tracking instruction with standard behavioral weight loss techniques (goal setting, self-monitoring, stimulus control, dietary and physical activity enhancements, lifestyle modifications); participants in weight tracking conditions were provided with wireless Internet technology (Wi-Fi-enabled digital scales and touchscreen personal devices) to facilitate weight tracking during the study. This paper describes the study design, intervention features, recruitment, and baseline characteristics of participants enrolled in the Tracking Study. PMID:25533727

Vertical Drop Testing and Analysis of the Wasp Helicopter Skid Gear

NASA Technical Reports Server (NTRS)

Jackson, Karen E.; Fuchs, Yvonne T.

2007-01-01

This report describes an experimental program to assess the impact performance of a skid gear for use on the Wasp kit-built helicopter, which is marketed by HeloWerks, Inc. of Hampton, Virginia. In total, five vertical drop tests were performed. The test article consisted of a skid gear mounted beneath a steel plate. A seating platform was attached to the upper surface of the steel plate, and two 95th percentile Hybrid III male Anthropomorphic Test Devices (ATDs) were seated on the platform and secured using a four-point restraint system. The test article also included ballast weights to ensure the correct position of the Center-of-Gravity (CG). Twenty-six channels of acceleration data were collected per test at 50,000 samples per second. The five drop tests were conducted on two different gear configurations. The details of these test programs are presented, as well as an occupant injury assessment. Finally, a finite element model of the skid gear test article was developed for execution in LS-DYNA, an explicit nonlinear transient dynamic code, for predicting the skid gear and occupant dynamic responses due to impact.

Impact damage resistance and residual property assessment of (0/+/-45/90)s SCS-6/Timetal 21S

NASA Technical Reports Server (NTRS)

Miller, Jennifer L.; Portanova, Marc A.; Johnson, W. Steven

1995-01-01

The impact damage resistance and residual mechanical properties of (0/ +/- 45/90)s SCS-6/Timetal 21S composites were evaluated. Both quasi-static indentation and drop-weight impact tests were used to investigate the impact behavior at two nominal energy levels (5.5 and 8.4 J) and determine the onset of internal damage. Through x-ray inspection, the extent of internal damage was characterized non-destructively. The composite strength and constant amplitude fatigue response were evaluated to assess the effects of the sustained damage. Scanning electron microscopy was used to characterize internal damage from impact in comparison to damage that occurs during mechanical loading alone. The effect of stacking sequence was examined by using specimens with the long dimension of the specimen both parallel (longitudinal) and perpendicular (transverse) to the 0 deg fiber direction. Damage in the form of longitudinal and transverse cracking occurred in all longitudinal specimens tested at energies greater than 6.3 J. Similar results occurred in the transverse specimens tested above 5.4 J. Initial load drop, characteristic of the onset of damage, occurred on average at 6.3 J in longitudinal specimens and at 5.0 J in transverse specimens. X-ray analysis showed broken fibers in the impacted region in specimens tested at the higher impact energies. At low impact energies, visible matrix cracking may occur, but broken fibers may not. Matrix cracking was noted along fiber swims and it appeared to depend on the surface quality of composite. At low impact energies, little damage has been incurred by the composite and the residual strength and residual life is not greatly reduced as compared to an undamaged composite. At higher impact energies, more damage occurred and a greater effect of the impact damage was observed.

40 CFR 1066.805 - Road-load power, test weight, and inertia weight class determination.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... (a) Simulate a vehicle's test weight on the dynamometer using the appropriate equivalent test weight shown in Table 1 of this section. Equivalent test weights are established according to each vehicle's... weight class corresponding to each equivalent test weight; the inertia weight class allows for grouping...

Modifiable lifestyle factors affecting bone health using calcaneus quantitative ultrasound in adolescent girls.

PubMed

Robinson, M L; Winters-Stone, K; Gabel, K; Dolny, D

2007-08-01

One hundred and fourteen girls were measured for calcaneus QUS (stiffness index score), calcium intake, weight, and total hours spent in physical activity (moderate to high-impact activities and low to no-impact activities). Multiple regression analysis indicated that hours spent in moderate to high-impact activities, current calcium intake, and weight significantly predicted SI. To determine the influence of modifiable lifestyle factors on adolescent girls' bone health measured by calcaneus quantitative ultrasound (QUS). One hundred and fourteen girls, ages 14-18 (15.97 +/- .7), enrolled in high school physical education classes, were measured for calcaneus QUS (stiffness index score), height, weight, current calcium intake from 2-3 day food records, and estimated total hours spent in physical activity from kindergarten to present. Cumulative physical activity hours were separated into two classifications (according to their estimated strain from ground reaction force): moderate to high-impact activities and low to no-impact activities. Pearson correlations between stiffness index (SI) and age, height, weight, current calcium intake, and hours spent in moderate to high-impact versus low to no-impact activities indicated a positive relationships between SI and weight (r = .259, p = .005), current calcium intake (r = .286, p = .002), and hours spent in moderate to high-impact activities (r = .451, p < .001). Multiple regression between SI and the above independent variables indicated that collectively, hours spent in moderate to high-impact activities, current calcium intake, and weight (r (2) = .363, p = <.001) significantly predicted SI. Our data indicate that moderate to high-impact activities, current calcium intake, and weight positively influence bone properties of the calcaneus in adolescent girls.

Entropy Based Genetic Association Tests and Gene-Gene Interaction Tests

PubMed Central

de Andrade, Mariza; Wang, Xin

2011-01-01

In the past few years, several entropy-based tests have been proposed for testing either single SNP association or gene-gene interaction. These tests are mainly based on Shannon entropy and have higher statistical power when compared to standard χ2 tests. In this paper, we extend some of these tests using a more generalized entropy definition, Rényi entropy, where Shannon entropy is a special case of order 1. The order λ (>0) of Rényi entropy weights the events (genotype/haplotype) according to their probabilities (frequencies). Higher λ places more emphasis on higher probability events while smaller λ (close to 0) tends to assign weights more equally. Thus, by properly choosing the λ, one can potentially increase the power of the tests or the p-value level of significance. We conducted simulation as well as real data analyses to assess the impact of the order λ and the performance of these generalized tests. The results showed that for dominant model the order 2 test was more powerful and for multiplicative model the order 1 or 2 had similar power. The analyses indicate that the choice of λ depends on the underlying genetic model and Shannon entropy is not necessarily the most powerful entropy measure for constructing genetic association or interaction tests. PMID:23089811

Life cycle impact assessment weights to support environmentally preferable purchasing in the United States.

PubMed

Gloria, Thomas P; Lippiatt, Barbara C; Cooper, Jennifer

2007-11-01

LCA is a quantitative method for understanding the environmental impacts of a product, yet all product purchasing decisions are ultimately subjective. Weights are the nexus between the quantitative results of LCA and the values-based, subjective choices of decision makers. In May 2007, NIST introduced a new optional weight set in Version 4.0 of the BEES software. Three key points about this new optional weight set are the basis for discussion in this paper: The new weight set was created specifically in the context of BEES. It is intended to support a practical method to assist environmentally preferable purchasing in the United States based on LCIA results. This is in contrast to the weight sets currently in BEES, which are based on generalist perspectives. The new weight set was created by a multi-stakeholder panel via the AHP method, and is a synthesis of panelists' perspectives on the relative importance of each environmental impact category in BEES. The weight set draws on each panelist's personal and professional understanding of, and value attributed to, each impact category. While the synthesized weight set may not equally satisfy each panelist's view of impact importance, it does reflect contemporary values in applying LCAto real world decisions, and represents one approach others can learn from in producing weight sets. The new weight set offers BEES users an additional option for synthesizing and comparing the environmental performance of building products and making purchasing decisions. In so doing, it strengthens the decision-making process, which is important when making product comparisons in the public domain. The Weight Set: Across all panelists and with explicit consideration of all time horizons, anthropogenic contributions to global warming, weighted at 29%, was judged most important, yet not so important that decisions can be made solely on the basis of this impact. A strong tail of other concerns include fossil fuel depletion (10%), criteria air pollutants (9%), water intake/use (8%), human health cancerous effects (8%), ecological toxicity (7%), eutrophication of water bodies (6%), land use (6%), and human health noncancerous effects (5%). Also of interest are the identified impact areas of concern assigned the lowest weights: smog formation (4%), indoor air quality (3%), acidification (3%), and ozone depletion (2%). Their low weights may indicate that there is not as much immediate concern or that the remedial actions associated with the impact for the most part are underway.

Meteoroid/Debris Shielding

NASA Technical Reports Server (NTRS)

Christiansen, Eric L.

2003-01-01

This report provides innovative, low-weight shielding solutions for spacecraft and the ballistic limit equations that define the shield's performance in the meteoroid/debris environment. Analyses and hypervelocity impact testing results are described that have been used in developing the shields and equations. Spacecraft shielding design and operational practices described in this report are used to provide effective spacecraft protection from meteoroid and debris impacts. Specific shield applications for the International Space Station (ISS), Space Shuttle Orbiter and the CONTOUR (Comet Nucleus Tour) space probe are provided. Whipple, Multi-Shock and Stuffed Whipple shield applications are described.

Comparison Virtual Landing Gear Drop Test for Commuter Aircraft Utilize MSC ADAMS And Solidworks Motion Analysis

NASA Astrophysics Data System (ADS)

Hidayat, Dony; Istiyanto, Jos; Agus Sumarsono, Danardono

2018-04-01

Loads at main landing gear while touchdown impact is function of aircraft weight and ground reaction load factor. In regulation states ground reaction load factor at Vsink = 3.05 m/s is below 3. Contact/impact force from simulation using MSC ADAMS is 94680 N, while using Solidworks Motion Analysis is 97691 N. The difference between MSC ADAMS and Solidworks Motion Analysis is 3.08%. The ground reaction load factor in MSC ADAMS is 2.78 while in Solidworks Motion Analysis is 2.87.

Production and mechanical properties of Al-SiC metal matrix composites

NASA Astrophysics Data System (ADS)

Karvanis, K.; Fasnakis, D.; Maropoulos, A.; Papanikolaou, S.

2016-11-01

The usage of Al-SiC Metal Matrix Composites is constantly increasing in the last years due to their unique properties such as light weight, high strength, high specific modulus, high fatigue strength, high hardness and low density. Al-SiC composites of various carbide compositions were produced using a centrifugal casting machine. The mechanical properties, tensile and compression strength, hardness and drop-weight impact strength were studied in order to determine the optimum carbide % in the metal matrix composites. Scanning electron microscopy was used to study the microstructure-property correlation. It was observed that the tensile and the compressive strength of the composites increased as the proportion of silicon carbide became higher in the composites. Also with increasing proportion of silicon carbide in the composite, the material became harder and appeared to have smaller values for total displacement and total energy during impact testing.

Butyrylcholinesterase regulates central ghrelin signaling and has an impact on food intake and glucose homeostasis.

PubMed

Chen, V P; Gao, Y; Geng, L; Brimijoin, S

2017-09-01

Ghrelin is the only orexigenic hormone known to stimulate food intake and promote obesity and insulin resistance. We recently showed that plasma ghrelin is controlled by butyrylcholinesterase (BChE), which has a strong impact on feeding and weight gain. BChE knockout (KO) mice are prone to obesity on high-fat diet, but hepatic BChE gene transfer rescues normal food intake and obesity resistance. However, these mice lack brain BChE and still develop hyperinsulinemia and insulin resistance, suggesting essential interactions between BChE and ghrelin within the brain. To test the hypothesis we used four experimental groups: (1) untreated wild-type mice, (2) BChE KO mice with LUC delivered by adeno-associated virus (AAV) in combined intravenous (i.v.) and intracerebral (i.c.) injections, (3) KO mice given AAV for mouse BChE (i.v. only) and (4) KO mice given the same vector both i.v. and i.c. All mice ate a 45% calorie high-fat diet from the age of 1 month. Body weight, body composition, daily caloric intake and serum parameters were monitored throughout, and glucose tolerance and insulin tolerance tests were performed at intervals. Circulating ghrelin levels dropped substantially in the KO mice after i.v. AAV-BChE delivery, which led to normal food intake and healthy body weight. BChE KO mice that received AAV-BChE through i.v. and i.c. combined treatments not only resisted weight gain on high-fat diet but also retained normal glucose and insulin tolerance. These data indicate a central role for BChE in regulating both insulin and glucose homeostasis. BChE gene transfer could be a useful therapy for complications linked to diet-induced obesity and insulin resistance.

Impacts of efficacy and exemplification in an online message about weight loss on weight management self-efficacy, satisfaction, and personal importance.

PubMed

Sarge, Melanie A; Knobloch-Westerwick, Silvia

2013-01-01

Health information search is among the most popular Internet activities, requiring health campaigns to attract attention in a context of unprecedented competition with alternative content. The present study reconstructs a similar context that allows selective avoidance and exposure in order to examine which health message characteristics foster particular message impacts. Drawing on social cognitive theory, a 3-session study examined short-term and delayed impacts of efficacy and exemplification as characteristics of a weight loss online message, offered for selective reading among other content, on weight management self-efficacy, satisfaction, and personal importance. Short-term impacts and impacts 2 weeks after exposure reflect that the high-efficacy exemplar version increased self-efficacy and satisfaction, while the high-efficacy base-rate version lowered them. However, the exemplar and base-rate versions of the low-efficacy message increased importance of body weight management.

High Speed Videometric Monitoring of Rock Breakage

NASA Astrophysics Data System (ADS)

Allemand, J.; Shortis, M. R.; Elmouttie, M. K.

2018-05-01

Estimation of rock breakage characteristics plays an important role in optimising various industrial and mining processes used for rock comminution. Although little research has been undertaken into 3D photogrammetric measurement of the progeny kinematics, there is promising potential to improve the efficacy of rock breakage characterisation. In this study, the observation of progeny kinematics was conducted using a high speed, stereo videometric system based on laboratory experiments with a drop weight impact testing system. By manually tracking individual progeny through the captured video sequences, observed progeny coordinates can be used to determine 3D trajectories and velocities, supporting the idea that high speed video can be used for rock breakage characterisation purposes. An analysis of the results showed that the high speed videometric system successfully observed progeny trajectories and showed clear projection of the progeny away from the impact location. Velocities of the progeny could also be determined based on the trajectories and the video frame rate. These results were obtained despite the limitations of the photogrammetric system and experiment processes observed in this study. Accordingly there is sufficient evidence to conclude that high speed videometric systems are capable of observing progeny kinematics from drop weight impact tests. With further optimisation of the systems and processes used, there is potential for improving the efficacy of rock breakage characterisation from measurements with high speed videometric systems.

Weight and lean body mass change with antiretroviral initiation and impact on bone mineral density.

PubMed

Erlandson, Kristine M; Kitch, Douglas; Tierney, Camlin; Sax, Paul E; Daar, Eric S; Tebas, Pablo; Melbourne, Kathleen; Ha, Belinda; Jahed, Nasreen C; McComsey, Grace A

2013-08-24

To compare the effect that initiating different antiretroviral therapy (ART) regimens has on weight, BMI, and lean body mass (LBM) and explore how changes in body composition are associated with bone mineral density (BMD). A5224s was a sub-study of A5202, a prospective trial of 1857 ART-naive participants randomized to blinded abacavir-lamivudine (ABC/3TC) or tenofovir DF-emtricitabine (TDF/FTC) with open-label efavirenz (EFV) or atazanavir-ritonavir (ATV/r). All participants underwent dual-energy absorptiometry (DXA) and abdominal computed tomography for body composition. Analyses used two-sample t-tests and linear regression. A5224s included 269 participants: 85% men, 47% white non-Hispanic, median age 38 years, HIV-1 RNA 4.6 log10 copies/ml, and CD4 cell count 233 cells/μl. Overall, significant gains occurred in weight, BMI, and LBM at 96 weeks post-randomization (all P<0.001). Assignment to ATV/r (vs. EFV) resulted in significantly greater weight (mean difference 3.35 kg) and BMI gain (0.88 kg/m; both P=0.02), but not LBM (0.67 kg; P=0.15), whereas ABC/3TC and TDF/FTC were not significantly different (P≥0.10). In multivariable analysis, only lower baseline CD4 cell count and higher HIV-1 RNA were associated with greater increase in weight, BMI, or LBM. In multivariable analyses, increased LBM was associated with an increased hip BMD. ABC/3TC vs. TDF/FTC did not differ in change in weight, BMI, or LBM; ATV/r vs. EFV resulted in greater weight and BMI gain but not LBM. A positive association between increased LBM and increased hip BMD should be further investigated through prospective interventional studies to verify the impact of increased LBM on hip BMD.

Impact of a Behavioral Weight Loss Intervention on Comorbidities in Overweight and Obese Breast Cancer Survivors

PubMed Central

Sedjo, Rebecca L.; Flatt, Shirley W.; Byers, Tim; Colditz, Graham A.; Demark-Wahnefried, Wendy; Ganz, Patricia A.; Wolin, Kathleen Y.; Elias, Anthony; Krontiras, Helen; Liu, Jingxia; Naughton, Michael; Pakiz, Bilgé; Parker, Barbara A.; Wyatt, Holly; Rock, Cheryl L.

2017-01-01

Purpose Comorbid medical conditions are common among breast cancer survivors, contribute to poorer long-term survival and increased overall mortality, and may be ameliorated by weight loss. This secondary analysis evaluated the impact of a weight loss intervention on comorbid medical conditions immediately following an intervention (12-months) and one-year post-intervention (24-month) using data from the Exercise and Nutrition to Enhance Recovery and Good health for You (ENERGY) trial – a phase III trial which was aimed at and successfully promoted weight loss. Methods ENERGY randomized 692 overweight/obese women who had completed treatment for early stage breast cancer to either a one-year group-based behavioral intervention designed to achieve and maintain weight loss or to a less intensive control intervention. Minimal support was provided post-intervention. New medical conditions, medical conditions in which non-cancer medications were prescribed, hospitalizations, and emergency room visits were compared at baseline, year 1 and 2. Changes over time were analyzed using chi-squared tests, Kaplan-Meier and logistic regression analyses. Results At 12 months, women randomized to the intervention had fewer new medical conditions compared to the control group (19.6% vs. 32.2%, p<0.001); however, by 24 months, there was no longer a significant difference. No difference was observed in each of four conditions for which non-cancer medications were prescribed, hospital visits, or emergency visits at either 12 or 24 months. Conclusions These results support a short-term benefit of modest weight loss on the likelihood of comorbid conditions; however, recidivism and weight regain likely explain no benefit at one-year post-intervention follow-up. PMID:26945570

DOE Office of Scientific and Technical Information (OSTI.GOV)

Preston, Daniel N; Peterson, Paul D; Kien - Yin, Lee

Structural damage in energetic materials plays a significant role in the probability of nonshock initiation events. Damage may occur in the form of voids or cracks either within crystals or in binder-rich regions between crystals. These cracks affect whether hotspots generated by impact will quench or propagate under non-shock insult. For this study, we have separately engineered intracrystalline and inter-crystalline cracks in to the HMX-based PBX 9501. Intra-crystalline cracks were created by subjecting HMX to forward and reverse solid-to-solid phase transformations prior to formulation. Inter-crystalline cracks were induced by compressing formulated samples of PBX 9501 at an average strain ratemore » of 0.00285 S{sup -1}. Both sets of pre-damaged explosives were then impact tested using the LANL Type 12 Drop Weight-Impact Machine and their sensitivities compared to nondamaged PBX 9501. Results of these tests clearly show significant differences in sensitivity between damaged and non-damaged PBX 9501.« less

Acoustic emission monitoring of low velocity impact damage in graphite/epoxy laminates during tensile loading

NASA Technical Reports Server (NTRS)

Parker, Bradford H.

1992-01-01

An acoustic emission (AE) system was set up in a linear location data acquisition mode to monitor the tensile loading of eight-ply quasi-isotropic graphite/epoxy specimens containing low velocity impact damage. The impact damage was induced using an instrumented drop weight tower. During impact, specimens were supported by either an aluminum plate or a membrane configuration. Cross-sectional examinations revealed that the aluminum plate configuration resulted in primarily matrix cracking and back surface fiber failure. The membrane support resulted in only matrix cracking and delamination damage. Penetrant enhanced radiography and immersion ultrasonics were used in order to assess the amount of impact damage in each tensile specimen. During tensile loading, AE reliably detected and located the damage sites which included fiber failure. All specimens with areas of fiber breakage ultimately failed at the impact site. AE did not reliably locate damage which consisted of only delaminations and matrix cracking. Specimens with this type of damage did not ultimately fail at the impact site. In summary, AE demonstrated the ability to increase the reliability of structural proof tests; however, the successful use of this technique requires extensive baseline testing.

Finite Element Modeling of Multilayer Orthogonal Auxetic Composites under Low-Velocity Impact

PubMed Central

Jiang, Lili; Hu, Hong

2017-01-01

The multilayer orthogonal auxetic composites have been previously developed and tested to prove that they own excellent energy absorption and impact protection characteristics in a specific strain range under low-velocity impact. In this study, a three dimensional finite element (FE) model in ANSYS LS-DYNA was established to simulate the mechanical behavior of auxetic composites under low-velocity drop-weight impact. The simulation results including the Poisson’s ratio versus compressive strain curves and the contact stress versus compressive strain curves were compared with those in the experiments. The clear deformation pictures of the FE models have provided a simple and effective way for investigating the damage mechanism and optimizing the material, as well as structure design. PMID:28783054

Impact of high-protein diets with either moderate or low carbohydrate on weight loss, body composition, blood pressure and glucose tolerance in rats.

PubMed

Lobley, Gerald E; Bremner, David M; Holtrop, Grietje; Johnstone, Alexandra M; Maloney, Christopher

2007-06-01

One approach to achieve weight loss and decrease both obesity and associated morbidities involves high-protein, low-carbohydrate (HPLC) diets. This study compares the impact on metabolic health of HPLC and high-protein, medium-carbohydrate (HPMC) diets offered to diet-induced obese (DIO) rats. Weanling male rats were fed either a 37 % fat diet (n 48) or stock pellets (n 12) for 22 weeks. Rats fed the 37 % fat diet accumulated more body fat (26.6 versus 14.8 % body weight, P < 0.001) compared with those on stock diet. The DIO rats had higher systolic blood pressure (+6.6 mmHg, P = 0.002), fasting insulin (+63 % P = 0.006) and areas under the glucose (+21 %, P < 0.001) and insulin (+81 %, P < 0.001) curves following an oral glucose tolerance test. DIO rats were then separated into four groups and offered for 8 weeks either: (1) the 37 % fat diet; (2) an HPLC or (3) HPMC diet; or (4) fed the 37 % fat diet to the intake of the HPMC group. Rats offered the 37 % fat or HPLC diets gained while those on HPMC lost body fat. Blood pressure was not altered by the dietary switch. Both HPLC and HPMC rats had lowered fasting insulin (P = 0.027) and improved homeostatic assessment (HOMA; P = 0.011) that was not different from those of stock animals. These improvements occurred despite differences in fat gain, and indicate that both weight loss and macronutrient intake can impact favourably on obesity-associated morbidities.

Hybrid carbon-glass fiber/toughened epoxy thick composites subject to drop-weight and ballistic impacts

NASA Astrophysics Data System (ADS)

Sevkat, Ercan

The goals of this study are to investigate the low velocity and ballistic impact response of thick-section hybrid fiber composites at room temperature. Plain-woven S2-Glass and IM7 Graphite fabrics are chosen as fiber materials reinforcing the SC-79 epoxy. Four different types of composites consisting of alternating layers of glass and graphite woven fabric sheets are considered. Tensile tests are conducted using 98 KN (22 kip) MTS testing machine equipped with environmental chamber. Low-velocity impact tests are conducted using an Instron-Dynatup 8250 impact test machine equipped with an environmental chamber. Ballistic impact tests are performed using helium pressured high-speed gas-gun. Tensile tests results were used to define the material behavior of the hybrid and non-hybrid composites in Finite Element modeling. The low velocity and ballistic impact tests showed that hybrid composites performance was somewhere between non-hybrid woven composites. Using woven glass fabrics as outer skin improved the impact performance of woven graphite composite. However hybrid composites are prone to delamination especially between dissimilar layers. The ballistic limit velocity V50 hybrid composites were higher that of woven graphite composite and lower than that of woven glass composite. Both destructive cross-sectional micrographs and nondestructive ultrasonic techniques are used to evaluate the damage created by impact. The Finite Element code LS-DYNA is chosen to perform numerical simulations of low velocity and ballistic impact on thick-section hybrid composites. The damage progression in these composites shows anisotropic nonlinearity. The material model to describe this behavior is not available in LS-DYNA material library. Initially, linear orthotropic material with damage (Chan-Chan Model) is employed to simulate some of the experimental results. Then, user-defined material subroutine is incorporated into LS-DYNA to simulate the nonlinear behavior. The experimentally obtained force-time histories, strain-time histories and damage patterns of impacted composites are compared with Finite element results. The results indicate that LS-DYNA could simulate the impact responses with sufficient accuracy once proper material models and boundary conditions are defined.

Weight Assessment for Fuselage Shielding on Aircraft With Open-Rotor Engines and Composite Blade Loss

NASA Technical Reports Server (NTRS)

Carney, Kelly; Pereira, Michael; Kohlman, Lee; Goldberg, Robert; Envia, Edmane; Lawrence, Charles; Roberts, Gary; Emmerling, William

2013-01-01

The Federal Aviation Administration (FAA) has been engaged in discussions with airframe and engine manufacturers concerning regulations that would apply to new technology fuel efficient "openrotor" engines. Existing regulations for the engines and airframe did not envision features of these engines that include eliminating the fan blade containment systems and including two rows of counter-rotating blades. Damage to the airframe from a failed blade could potentially be catastrophic. Therefore the feasibility of using aircraft fuselage shielding was investigated. In order to establish the feasibility of this shielding, a study was conducted to provide an estimate for the fuselage shielding weight required to provide protection from an open-rotor blade loss. This estimate was generated using a two-step procedure. First, a trajectory analysis was performed to determine the blade orientation and velocity at the point of impact with the fuselage. The trajectory analysis also showed that a blade dispersion angle of 3deg bounded the probable dispersion pattern and so was used for the weight estimate. Next, a finite element impact analysis was performed to determine the required shielding thickness to prevent fuselage penetration. The impact analysis was conducted using an FAA-provided composite blade geometry. The fuselage geometry was based on a medium-sized passenger composite airframe. In the analysis, both the blade and fuselage were assumed to be constructed from a T700S/PR520 triaxially-braided composite architecture. Sufficient test data on T700S/PR520 is available to enable reliable analysis, and also demonstrate its good impact resistance properties. This system was also used in modeling the surrogate blade. The estimated additional weight required for fuselage shielding for a wing- mounted counterrotating open-rotor blade is 236 lb per aircraft. This estimate is based on the shielding material serving the dual use of shielding and fuselage structure. If the shielding material is not used for dual purpose, and is only used for shielding, then the additional weight per aircraft is estimated to be 428 lb. This weight estimate is based upon a number of assumptions that would need to be revised when applying this concept to an actual airplane design. For example, the weight savings that will result when there is no fan blade containment system, manufacturing limitations which may increase the weight where variable thicknesses was assumed, engine placement on the wing versus aft fuselage, etc.

Effects of plyometric exercise training with external weights on punching ability of experienced amateur boxers.

PubMed

Bruzas, Vidas; Kamandulis, Sigitas; Venckunas, Tomas; Snieckus, Audrius; Mockus, Pranas

2018-03-01

During competition, a boxer must continue to deliver high-impact punches despite increasing fatigue. It is unclear whether the effects of plyometric training using external weights are transferred to sport-specific movements such as punching. The aim of the study was to investigate the effects of a 4-week cycle of plyometric training with external weights on punching ability. The study involved eight male amateur boxers aged 22.3±2.5 years with at least 7 years of competitive experience. They performed 12 plyometric training sessions, each comprising eight exercises of various muscle groups performed at maximum movement velocity. Six drills were performed with external weights, and two drills were performed using the body weight as resistance. All exercises required coordination. The punching ability was tested at baseline and after the 4 weeks of training using the Kiktest-100 boxing bag. The force of single punches and the frequency of punches within a series did not change from before to after the 4 weeks, except for increased power in the rear-hand low punch (P<0.05). However, there was an increase in summative force and energy output within 3 s and 8 s, and in a series of eight 8-s tests (P<0.05). Four weeks of plyometric training with external weights did not change the maximum punching power or movement frequency significantly, but had a beneficial effect on punching power endurance in boxers.

Study of the relation between body weight and functional limitations and pain in patients with knee osteoarthritis.

PubMed

Alfieri, Fábio Marcon; Silva, Natália Cristina de Oliveira Vargas E; Battistella, Linamara Rizzo

2017-01-01

To assess the influence of the body weight in functional capacity and pain of adult and elderly individuals with knee osteoarthritis. The sample consisted of 107 adult and elderly patients with knee osteoarthritis divided into two groups (adequate weight/adiposity and excessive weight/adiposity) according to body mass index and percent of body fat mass, assessed by electric bioimpedance. Subjects were evaluated for functional mobility (Timed Up and Go Test), pain, stiffness and function (Western Ontario and MacMaster Universities Osteoarthritis Index - WOMAC), pain intensity (Visual Analogue Scale - VAS) and pressure pain tolerance threshold (algometry in vastus medialis and vastus lateralis muscles). Data were analyzed with Statistical Package of the Social Sciences, version 22 for Windows. Comparisons between groups were made through Student's t test, with significance level set at 5%. There was predominance of females in the sample (81.3%), and mean age was 61.8±10.1 years. When dividing the sample by both body mass index and adiposity, 89.7% of them had weight/adiposity excess, and 59.8% were obese. There was no difference between groups regarding age, pain intensity, pressure pain tolerance threshold, functional mobility, stiffness and function. However, pain (WOMAC) was higher (p=0.05) in the group of patients with weight or adiposity excess, and pain perception according to VAS was worse in the group of obese patients (p=0.05). Excessive weight had negative impact in patients with osteoarthritis, increasing pain assessed by WOMAC or VAS, although no differences were observed in functionality and pressure pain tolerance.

Impact behaviour of Napier/polyester composites under different energy levels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fahmi, I., E-mail: fahmi-unimap@yahoo.com; Majid, M. S. Abdul, E-mail: shukry@unimap.edu.my; Afendi, M., E-mail: afendirojan@unimap.edu.my

2016-07-19

The effects of different energy levels on the impact behaviour of Napier fibre/polyester reinforced composites were investigated. Napier fibre was extracted using traditional water retting process to be utilized as reinforcing materials in polyester composite laminates. 25% fibre loading composite laminates were prepared and impacted at three different energy levels; 2.5,5 and 7.5 J using an instrumented drop weight impact testing machine (IMATEK IM10). The outcomes show that peak force and contact time increase with increased impact load. The energy absorption was then calculated from the force displacement curve. The results indicated that the energy absorption decreases with increasing energymore » levels of the impact. Impacted specimens were observed visually for fragmentation fracture using an optical camera to identify the failure mechanisms. Fracture fragmentation pattern from permanent dent to perforation with radial and circumferential was observed.« less

Throttle pneumatic impact mechanism equipped with afterburner idle-stroke chamber

NASA Astrophysics Data System (ADS)

Dedov, Alexey; Frantseva, Eleanor; Dmitriev, Mikhail

2017-01-01

Pneumatic impact mechanisms are widely used in construction, mining and other economic sectors of a country. Such mechanisms are a base for a wide range of machines of various types and dimensions from hand-held tools to mounted piling hammers with impact energy up to 10 000 J. This paper is aimed at creation of pneumatic impact mechanism with the improved characteristics, including operation, energy use, weight and size which is especially important in space-limited working conditions. The research methods include development of computer mathematical model that can solve equations system and test a prototype model at the experimental stand. As a result of conducted research the pneumatic impact mechanism with the improved characteristics was developed. An engineering method for calculating throttle pneumatic impact mechanisms with a preset value of impact energy from 1 to 20 000 was investigated. This method allows creating percussive machines of a wide range of application.

Who responds to financial incentives for weight loss? Evidence from a randomized controlled trial.

PubMed

Paloyo, Alfredo R; Reichert, Arndt R; Reuss-Borst, Monika; Tauchmann, Harald

2015-11-01

There is a paucity of evidence on the heterogeneous impacts of financial incentives on weight loss. Between March 2010 and January 2012, in a randomized controlled trial, we assigned 700 obese persons to three experimental arms. We test whether particular subgroups react differently to financial incentives for weight loss. Two treatment groups obtained a cash reward (€150 and €300 with 237 and 229 participants, respectively) for achieving an individually-assigned target weight within four months; the control group (234 participants) was not incentivized. Participants and administrators were not blinded to the intervention. We find that monetary rewards effectively induced obese individuals to reduce weight across all subgroups. However, there is no evidence for treatment-effect heterogeneity for those groups that were incentivized. Among those who were in the €300 group, statistically significant and large weight losses were observed for women, singles, and those who are not working (all above 4 kg in four months). In addition, the magnitude of the reward matters only for women and migrants. The effectiveness of financial incentives to reduce weight nevertheless raises sensitive ethical issues that should be taken into consideration by policymakers. Copyright © 2015 Elsevier Ltd. All rights reserved.

Distributed dynamic load on composite laminates

NASA Astrophysics Data System (ADS)

Langella, A.; Lopresto, V.; Caprino, G.

2016-05-01

An experimental activity conducted in order to assess the impact behavior at room and low temperature of carbon fibre in vinylester resin laminates used in the shipbuilding industry, was reported. The conditions which reproduce the impact of a hull at low temperature with a solid body suspended in the water was reproduced. A test equipment was designed and realized to reproduce the real material behaviour in water to obtain a load distribution on the entire surface of the specimen. The results were obtained impacting the laminates placed between the cilyndrical steel impactor and a bag containing water. A falling weight machine, equipped with an instrumented steel impactor and a thermal chamber, was adopted for the experimental tests. The impact behaviour in hostile environments was compared to the behaviour at room temperature and the data obtained under distributed load conditions were compared with the results from concentrated loads: a completely different behaviour was observed between the two different loading conditions in terms of load-displacement curve. The effect of the impact on the laminates has been related with the delaminations, evaluated by ultrasonic scanning, and the indentation.

Impact of social pressure on stereotypes about obese people.

PubMed

Harper, Jessica; Carels, Robert A

2014-01-01

This study was designed to test the effects of different types of influence on the expression of stereotypes towards people who are obese. It was hypothesized that public social pressure would more significantly impact the expression of stereotypes towards obese people than other types of influence. One-hundred fifty-eight undergraduate students were randomly assigned to one of three conditions or a control condition. Participants completed measures of stereotypes towards obese people prior to and after receiving manipulated feedback depicting purported stereotypes possessed by others (anonymously or publically) or scientific information about the base rates of these stereotypical traits in the obese population (i.e., trait prevalence). Participants also completed a measure of weight bias unrelated to the manipulated feedback. Explicit beliefs were influenced more when people perceived that others' views were inconsistent with their own in a public setting than an anonymous setting or when they received trait prevalence feedback. However, levels of weight bias on a separate measure were unchanged. Strong, public manipulations of social feedback have great potential to impact, at least, the short-term expression of stereotypes towards obese people.

Impact of maternal body mass index and gestational weight gain on neonatal outcomes among healthy Middle-Eastern females

PubMed Central

Papazian, Tatiana; Abi Tayeh, Georges; Sibai, Darine; Hout, Hala; Melki, Imad

2017-01-01

Background Studies on the relative impact of body mass index in women in childbearing age and gestational weight gain on neonatal outcomes are scarce in the Middle East. Objectives The primary objective of this research was to assess the impact of maternal body mass index (BMI) and gestational weight gain (GWG) on neonatal outcomes. The effect of maternal age and folic acid supplementation before and during pregnancy was also examined. Subjects and methods This is a retrospective cross sectional observational study of 1000 full term deliveries of women enrolled thru the National Collaborative Perinatal Neonatal Network, in Lebanon. Maternal characteristics such as age, BMI and GWG and neonatal outcomes such as weight, height, head circumference and Apgar score were the primary studied variables in this study. Total maternal weight gain were compared to the guidelines depicted by the Institute of Medicine (IOM). Results The negative outcomes of newborns such as lean body weight and macrosomia were significantly present in women who gained respectively below or above the IOM’s cut-off points. Pregestational body mass index influenced significantly the infants’ birth weight, in both the underweight and obese categories. Birth height, head circumference and Apgar score were not influenced by pregestational body mass index or gestational weight gain. No significant associations were found between maternal age and pregestational body mass index and gestational weight gain. Conclusion Studies evaluating the impact of weight before and during pregnancy on neonatal outcomes and anthropometrics measurements are lacking in the Middle East. Our results highlight the importance of nutritional counseling in order to shed the extra weights before conceiving and monitor weight gain to avoid the negative impact on feto-maternal health. PMID:28715482

Impact of maternal body mass index and gestational weight gain on neonatal outcomes among healthy Middle-Eastern females.

PubMed

Papazian, Tatiana; Abi Tayeh, Georges; Sibai, Darine; Hout, Hala; Melki, Imad; Rabbaa Khabbaz, Lydia

2017-01-01

Studies on the relative impact of body mass index in women in childbearing age and gestational weight gain on neonatal outcomes are scarce in the Middle East. The primary objective of this research was to assess the impact of maternal body mass index (BMI) and gestational weight gain (GWG) on neonatal outcomes. The effect of maternal age and folic acid supplementation before and during pregnancy was also examined. This is a retrospective cross sectional observational study of 1000 full term deliveries of women enrolled thru the National Collaborative Perinatal Neonatal Network, in Lebanon. Maternal characteristics such as age, BMI and GWG and neonatal outcomes such as weight, height, head circumference and Apgar score were the primary studied variables in this study. Total maternal weight gain were compared to the guidelines depicted by the Institute of Medicine (IOM). The negative outcomes of newborns such as lean body weight and macrosomia were significantly present in women who gained respectively below or above the IOM's cut-off points. Pregestational body mass index influenced significantly the infants' birth weight, in both the underweight and obese categories. Birth height, head circumference and Apgar score were not influenced by pregestational body mass index or gestational weight gain. No significant associations were found between maternal age and pregestational body mass index and gestational weight gain. Studies evaluating the impact of weight before and during pregnancy on neonatal outcomes and anthropometrics measurements are lacking in the Middle East. Our results highlight the importance of nutritional counseling in order to shed the extra weights before conceiving and monitor weight gain to avoid the negative impact on feto-maternal health.

Using Family-Focused Garden, Nutrition, and Physical Activity Programs To Reduce Childhood Obesity: The Texas! Go! Eat! Grow! Pilot Study.

PubMed

Spears-Lanoix, Erica C; McKyer, E Lisako J; Evans, Alexandra; McIntosh, William Alex; Ory, Marcia; Whittlesey, Lisa; Kirk, Alice; Hoelscher, Deanna M; Warren, Judith L

2015-12-01

The TEXAS! GROW! EAT! GO! (TGEG) randomized, control trial is a 5-year study to measure the impact of a nutrition and gardening intervention and/or physical activity (PA) intervention on the weight status of third-grade students. This article describes the results of the pilot study to test the feasibility of two interventions and test the measures to be used in the main trial. The pilot study was conducted in one school with third-grade students and their parents or guardians. The Junior Master Gardner (JMG) and Walk Across Texas (WAT) interventions were implemented over a 5-month period in three third-grade classrooms during spring 2012. The respective interventions focused on improving healthy eating and PA behaviors of children and their families. Baseline and immediate post-test data were collected from students and parents/guardians to measure four child, four parent, and four parent-child interaction behaviors. Process data regarding implementation were also collected from teachers and school administration. Forty-four students and 34 parents or guardians provided both pre- and post-test data. Paired-sample t-tests showed statistically significant changes in student knowledge, vegetable preferences, vegetable consumption, and home food availability (all p < 0.05). At baseline, participants' weight status categories included 57% obese, 10% overweight, and 31% normal weight. Postintervention, weight status categories included 39% obese, 16% overweight, and normal 45%. Data collected from teachers indicated high levels of implementation fidelity. Implementation of both interventions occurred at a very high fidelity level, which led to positive changes in BMI status, and several dietary and PA behaviors. Although the pilot study indicated feasibility of the two interventions for school implementation, results guided revisions to the TGEG program and its survey instruments.

Internalized societal attitudes moderate the impact of weight stigma on avoidance of exercise.

PubMed

Vartanian, Lenny R; Novak, Sarah A

2011-04-01

Experiences with weight stigma negatively impact both psychological outcomes (e.g., body dissatisfaction, depression) and behavioral outcomes (e.g., dieting, exercise). However, not everyone is equally affected by experiences with weight stigma. This study examined whether internalized societal attitudes about weight moderated the impact of weight stigma. Adult participants (n = 111) completed measures of experiences with weight stigma, as well as two indexes of internalized societal attitudes (the moderators): Internalized anti-fat attitudes and internalization of societal standards of attractiveness. Psychological outcomes included self-esteem, body dissatisfaction, drive for thinness, and bulimic symptoms; behavioral outcomes included avoidance of exercise and self-reported exercise behavior. Weight stigma was positively correlated with body dissatisfaction, drive for thinness, and bulimic symptoms, and was negatively correlated with state and trait self-esteem. Both indexes of internalized attitudes moderated the association between weight stigma and avoidance of exercise: Individuals high in anti-fat attitudes and high in internalization of societal standards of attractiveness were more motivated to avoid exercise if they also experienced a high degree of weight stigma; individuals low in anti-fat attitudes and low in internalization were relatively unaffected. Avoidance of exercise was negatively correlated with self-reported strenuous exercise. These findings suggest that weight stigma can negatively influence motivation to exercise, particularly among individuals who have internalized societal attitudes about weight. Reducing internalization might be a means of minimizing the negative impact of weight stigma and of facilitating healthy weight management efforts.

Quantitative impact characterization of aeronautical CFRP materials with non-destructive testing methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kiefel, Denis, E-mail: Denis.Kiefel@airbus.com, E-mail: Rainer.Stoessel@airbus.com; Stoessel, Rainer, E-mail: Denis.Kiefel@airbus.com, E-mail: Rainer.Stoessel@airbus.com; Grosse, Christian, E-mail: Grosse@tum.de

2015-03-31

In recent years, an increasing number of safety-relevant structures are designed and manufactured from carbon fiber reinforced polymers (CFRP) in order to reduce weight of airplanes by taking the advantage of their specific strength into account. Non-destructive testing (NDT) methods for quantitative defect analysis of damages are liquid- or air-coupled ultrasonic testing (UT), phased array ultrasonic techniques, and active thermography (IR). The advantage of these testing methods is the applicability on large areas. However, their quantitative information is often limited on impact localization and size. In addition to these techniques, Airbus Group Innovations operates a micro x-ray computed tomography (μ-XCT)more » system, which was developed for CFRP characterization. It is an open system which allows different kinds of acquisition, reconstruction, and data evaluation. One main advantage of this μ-XCT system is its high resolution with 3-dimensional analysis and visualization opportunities, which enables to gain important quantitative information for composite part design and stress analysis. Within this study, different NDT methods will be compared at CFRP samples with specified artificial impact damages. The results can be used to select the most suitable NDT-method for specific application cases. Furthermore, novel evaluation and visualization methods for impact analyzes are developed and will be presented.« less

Uniform Foam Crush Testing for Multi-Mission Earth Entry Vehicle Impact Attenuation

NASA Technical Reports Server (NTRS)

Patterson, Byron W.; Glaab, Louis J.

2012-01-01

Multi-Mission Earth Entry Vehicles (MMEEVs) are blunt-body vehicles designed with the purpose of transporting payloads from outer space to the surface of the Earth. To achieve high-reliability and minimum weight, MMEEVs avoid use of limited-reliability systems, such as parachutes and retro-rockets, instead using built-in impact attenuators to absorb energy remaining at impact to meet landing loads requirements. The Multi-Mission Systems Analysis for Planetary Entry (M-SAPE) parametric design tool is used to facilitate the design of MMEEVs and develop the trade space. Testing was conducted to characterize the material properties of several candidate impact foam attenuators to enhance M-SAPE analysis. In the current effort, four different Rohacell foams are tested at three different, uniform, strain rates (approximately 0.17, approximately 100, approximately 13,600%/s). The primary data analysis method uses a global data smoothing technique in the frequency domain to remove noise and system natural frequencies. The results from the data indicate that the filter and smoothing technique are successful in identifying the foam crush event and removing aberrations. The effect of strain rate increases with increasing foam density. The 71-WF-HT foam may support Mars Sample Return requirements. Several recommendations to improve the drop tower test technique are identified.

Non-Destructive Thermography Analysis of Impact Damage on Large-Scale CFRP Automotive Parts

PubMed Central

Maier, Alexander; Schmidt, Roland; Oswald-Tranta, Beate; Schledjewski, Ralf

2014-01-01

Laminated composites are increasingly used in aeronautics and the wind energy industry, as well as in the automotive industry. In these applications, the construction and processing need to fulfill the highest requirements regarding weight and mechanical properties. Environmental issues, like fuel consumption and CO2-footprint, set new challenges in producing lightweight parts that meet the highly monitored standards for these branches. In the automotive industry, one main aspect of construction is the impact behavior of structural parts. To verify the quality of parts made from composite materials with little effort, cost and time, non-destructive test methods are increasingly used. A highly recommended non-destructive testing method is thermography analysis. In this work, a prototype for a car’s base plate was produced by using vacuum infusion. For research work, testing specimens were produced with the same multi-layer build up as the prototypes. These specimens were charged with defined loads in impact tests to simulate the effect of stone chips. Afterwards, the impacted specimens were investigated with thermography analysis. The research results in that work will help to understand the possible fields of application and the usage of thermography analysis as the first quick and economic failure detection method for automotive parts. PMID:28788464

Weight gain in mice on a high caloric diet and chronically treated with omeprazole depends on sex and genetic background

PubMed Central

Tsao, Amy C.; Gillilland, Merritt G.; Merchant, Juanita L.

2016-01-01

The impact of omeprazole (OM), a widely used over-the-counter proton pump inhibitor, on weight gain has not been extensively explored. We examined what factors, e.g., diet composition, microbiota, genetic strain, and sex, might affect weight gain in mice fed a high caloric diet while on OM. Inbred C57BL/6J strain, a 50:50 hybrid (B6SJLF1/J) strain, and mice on a highly mixed genetic background were fed four diets: standard chow (STD, 6% fat), STD with 200 ppm OM (STD + O), a high-energy chow (HiE, 11% fat), and HiE chow with OM (HiE + O) for 17 wk. Metabolic analysis, body composition, and fecal microbiota composition were analyzed in C57BL/6J mice. Oral glucose tolerance tests were performed using mice on the mixed background. After 8 wk, female and male C57BL/6J mice on the HiE diets ate less, whereas males on the HiE diets compared with the STD diets gained weight. All diet treatments reduced energy expenditure in females but in males only those on the HiE + O diet. Gut microbiota composition differed in the C57BL/6J females but not the males. Hybrid B6SJLF1/J mice showed similar weight gain on all test diets. In contrast, mixed strain male mice fed a HiE + O diet gained ∼40% more weight than females on the same diet. In addition to increased weight gain, mixed genetic mice on the HiE + O diet cleared glucose normally but secreted more insulin. We concluded that sex and genetic background define weight gain and metabolic responses of mice on high caloric diets and OM. PMID:27810953

Differential Rearing Alters Forced Swim Test Behavior, Fluoxetine Efficacy, and Post-Test Weight Gain in Male Rats.

PubMed

Arndt, David L; Peterson, Christy J; Cain, Mary E

2015-01-01

Environmental factors play a key role in the etiology of depression. The rodent forced swim test (FST) is commonly used as a preclinical model of depression, with increases in escape-directed behavior reflecting antidepressant effects, and increases in immobility reflecting behavioral despair. Environmental enrichment leads to serotonergic alterations in rats, but it is unknown whether these alterations may influence the efficacy of common antidepressants. Male Sprague-Dawley rats were reared in enriched (EC), standard (SC), or isolated (IC) conditions. Following the rearing period, fluoxetine (10 or 20 mg/kg, i.p.) was administered 23.5 hrs, 5 hrs, and 1 hr before locomotor and FST measures. Following locomotor testing and FST exposure, rats were weighed to assess fluoxetine-, FST-, and environmental condition-induced moderations in weight gain. Results revealed an antidepressant effect of environmental enrichment and a depressant effect of isolation. Regardless of significant fluoxetine effects on locomotor activity, fluoxetine generally decreased swimming and increased immobility in all three environmental conditions, with IC-fluoxetine (10 mg/kg) rats and EC-fluoxetine (20 mg/kg) rats swimming less than vehicle counterparts. Subchronic 20 mg/kg fluoxetine also induced significant weight loss, and differential rearing appeared to moderate weight gain following FST stress. These results suggest that differential rearing has the ability to alter FST behaviors, fluoxetine efficacy, and post-stressor well-being. Moreover, 20 mg/kg fluoxetine, administered subchronically, may lead to atypical effects of those commonly observed in the FST, highlighting the importance and impact of both environmental condition and dosing regimen in common animal models of depression.

Differential Rearing Alters Forced Swim Test Behavior, Fluoxetine Efficacy, and Post-Test Weight Gain in Male Rats

PubMed Central

Arndt, David L.; Peterson, Christy J.; Cain, Mary E.

2015-01-01

Environmental factors play a key role in the etiology of depression. The rodent forced swim test (FST) is commonly used as a preclinical model of depression, with increases in escape-directed behavior reflecting antidepressant effects, and increases in immobility reflecting behavioral despair. Environmental enrichment leads to serotonergic alterations in rats, but it is unknown whether these alterations may influence the efficacy of common antidepressants. Male Sprague-Dawley rats were reared in enriched (EC), standard (SC), or isolated (IC) conditions. Following the rearing period, fluoxetine (10 or 20 mg/kg, i.p.) was administered 23.5 hrs, 5 hrs, and 1 hr before locomotor and FST measures. Following locomotor testing and FST exposure, rats were weighed to assess fluoxetine-, FST-, and environmental condition-induced moderations in weight gain. Results revealed an antidepressant effect of environmental enrichment and a depressant effect of isolation. Regardless of significant fluoxetine effects on locomotor activity, fluoxetine generally decreased swimming and increased immobility in all three environmental conditions, with IC-fluoxetine (10 mg/kg) rats and EC-fluoxetine (20 mg/kg) rats swimming less than vehicle counterparts. Subchronic 20 mg/kg fluoxetine also induced significant weight loss, and differential rearing appeared to moderate weight gain following FST stress. These results suggest that differential rearing has the ability to alter FST behaviors, fluoxetine efficacy, and post-stressor well-being. Moreover, 20 mg/kg fluoxetine, administered subchronically, may lead to atypical effects of those commonly observed in the FST, highlighting the importance and impact of both environmental condition and dosing regimen in common animal models of depression. PMID:26154768

Ultrasonic Assessment of Impact-Induced Damage and Microcracking in Polymer Matrix Composites

NASA Technical Reports Server (NTRS)

Liaw, Benjamin; Zeichner, Glenn; Liu, Yanxiong; Bowles, Kenneth J. (Technical Monitor)

2000-01-01

The main objective of this NASA FAR project is to conduct ultrasonic assessment of impact-induced damage and microcracking in polymer matrix composites at various temperatures. It is believed that the proposed study of impact damage assessment on polymer matrix composites will benefit several NASA's missions and current interests, such as ballistic impact testing of composite fan containment and high strain rate deformation modeling of polymer matrix composites. Currently, impact-induced delamination and fracture in 6061-T6 aluminum/cast acrylic sandwich plates adhered by epoxy were generated in an instrumented drop-weight impact machine. Although only a small dent was produced on the aluminum side when a hemispherical penetrator tup was dropped onto it from a couple of inches, a large ring of delamination at the interface was observed. The delamination damage was often accompanied by severe shattering in the acrylic substratum. Damage patterns in the acrylic layer include radial and ring cracks and, together with delamination at the interface, may cause peeling-off of acrylic material from the sandwich plate. Theory of stress-wave propagation can be used to explain these damage patterns. The impact tests were conducted at various temperatures. The results also show clearly that temperature effect is very important in impact damage. For pure cast acrylic nil-ductile transition (NDT) occurs between 185-195 F Excessive impact energy was dissipated into fracture energy when tested at temperature below this range or through plastic deformation when tested at temperature above the NDT temperature. Results from this study will be used as baseline data for studying fiber-metal laminates, such as GLARE and ARALL for advanced aeronautical and astronautical applications.

NREL Highlight: Truck Platooning Testing; NREL (National Renewable Energy Laboratory)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

NREL's fleet test and evaluation team assesses the fuel savings potential of semi-automated truck platooning of line-haul sleeper cabs with modern aerodynamics. Platooning reduces aerodynamic drag by grouping vehicles together and safely decreasing the distance between them via electronic coupling, which allows multiple vehicles to accelerate or brake simultaneously. In 2014, the team conducted track testing of three SmartWay tractor - two platooned tractors and one control tractor—at varying steady-state speeds, following distances, and gross vehicle weights. While platooning improved fuel economy at all speeds, travel at 55 mph resulted in the best overall miles per gallon. The lead truckmore » demonstrated fuel savings up to 5.3% while the trailing truck saved up to 9.7%. A number of conditions impact the savings attainable, including ambient temperature, distance between lead and trailing truck, and payload weight. Future studies may look at ways to optimize system fuel efficiency and emissions reductions.« less

Development of an impact- and solvent-resistant thermoplastic composite matrix, phase 4

NASA Technical Reports Server (NTRS)

Delano, C. B.

1987-01-01

Polyimides from BTDA with m-phenylenediamine and three aliphatic diamines were prepared in cresol and characterized. Characterization tests included compression strength and modulus, stressed solvent resistance, and melt-flow tests. Efforts to reduce the molecular weights of these polymers by either stoichiometric imbalance or phthalic anhydride end capping produced opacity in the polymer moldings when the stoichiometry was less than 99 percent. Use of 2,4-diaminotoluene in place of the m-phenylenediamine allowed clear polymer moldings to be obtained at all stoichiometries by end capping or stoichiometric imbalance. After melt-flow/molecular-weight studies, carbon fabric composites were prepared from three polyimide compositions containing BTDA, 2,4-diaminotoluene and two aliphatic diamines. Flexural strengths of two of the resins were in excess of 689 MPa (100 ksi) at both room temperature and 93 C. The polyimide from BTDA was selected for scale-up and neat resin characterization tests. The Tg of this polymer was 233 C.

The effect of hardhats on head and neck response to vertical impacts from large construction objects.

PubMed

Suderman, Bethany L; Hoover, Ryan W; Ching, Randal P; Scher, Irving S

2014-12-01

We evaluated the effectiveness of hardhats in attenuating head acceleration and neck force in vertical impacts from large construction objects. Two weight-matched objects (lead shot bag and concrete block) weighing 9.1 kg were dropped from three heights (0.91 m, 1.83 m and 2.74 m) onto the head of a 50th percentile male Hybrid III anthropomorphic test device (ATD). Two headgear conditions were tested: no head protection and an ANSI Type-I, Class-E hardhat. A third headgear condition (snow sport helmet) was tested at 1.83 m for comparison with the hardhat. Hardhats significantly reduced the resultant linear acceleration for the concrete block impacts by 70-95% when compared to the unprotected head condition. Upper neck compression was also significantly reduced by 26-60% with the use of a hardhat when compared to the unprotected head condition for the 0.91 and 1.83 m drop heights for both lead shot and concrete block drop objects. In this study we found that hardhats can be effective in reducing both head accelerations and compressive neck forces for large construction objects in vertical impacts. Copyright © 2014 Elsevier Ltd. All rights reserved.

76 FR 28947 - Bus Testing: Calculation of Average Passenger Weight and Test Vehicle Weight, and Public Meeting...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-19

...-0015] RIN 2132-AB01 Bus Testing: Calculation of Average Passenger Weight and Test Vehicle Weight, and... of proposed rulemaking (NPRM) regarding the calculation of average passenger weights and test vehicle... passenger weights and actual transit vehicle loads. Specifically, FTA proposed to change the average...

Psychometric evaluation of the impact of weight on quality of life-lite questionnaire (IWQOL-lite) in a community sample.

PubMed

Kolotkin, Ronette L; Crosby, Ross D

2002-03-01

The short form of impact of weight on quality of life (IWQOL)-Lite is a 31-item, self-report, obesity-specific measure of health-related quality of life (HRQOL) that consists of a total score and scores on each of five scales--physical function, self-esteem, sexual life, public distress, and work--and that exhibits strong psychometric properties. This study was undertaken in order to assess test-retest reliability and discriminant validity in a heterogeneous sample of individuals not in treatment. Individuals were recruited from the community to complete questionnaires that included the IWQOL-Lite, SF-36, Rosenberg self-esteem (RSE) scale, Marlowe-Crowne social desirability scale, global ratings of quality of life, and sexual functioning and public distress ratings. Persons currently enrolled in weight loss programs or with a body mass index (BMI) of less than 18.5 were dropped from the analyses, leaving 341 females and 153 males for analysis, with an average BMI of 27.4. For test-retest reliability, 112 participants completed the IWQOL-Lite again. ANOVA revealed significant main effects for BMI for all IWQOL-Lite scales and total score. Females showed greater impairment than males on all scales except public distress. Internal consistency ranged from 0.816 to 0.944 for IWQOL-Lite scales and was 0.958 for total score. Test-retest reliability ranged from 0.814 to 0.877 for scales and was 0.937 for total score. Internal consistency and test-retest results for overweight/obese subjects were similar to those obtained for the total sample. There was strong evidence for convergent and discriminant validity of the IWQOL-Lite in overweight/obese subjects. As in previous studies conducted on treatment-seeking obese persons, the IWQOL-Lite appears to be a reliable and valid measure of obesity-specific quality of life in overweight/obese persons not seeking treatment.

Low and high velocity impact response of thick hybrid composites

NASA Technical Reports Server (NTRS)

Hiel, Clement; Ishai, Ori

1993-01-01

The effects of low and high velocity impact on thick hybrid composites (THC's) were experimentally compared. Test Beams consisted of CFRP skins which were bonded onto an interleaved syntactic foam core and cured at 177 C (350 F). The impactor tip for both cases was a 16 mm (0.625 inch) steel hemisphere. In spite of the order of magnitude difference in velocity ranges and impactor weights, similar relationships between impact energy, damage size, and residual strength were found. The dependence of the skin compressive strength on damage size agree well with analytical open hole models for composite laminates and may enable the prediction of ultimate performance for the damaged composite, based on visual inspection.

Failure mode prediction for composite structural insulated panels with MgO board facings

NASA Astrophysics Data System (ADS)

Smakosz, Łukasz; Kreja, Ireneusz

2018-01-01

Sandwich panels are readily used in civil engineering due to their high strength to weight ratio and the ease and speed of assembly. The idea of a sandwich section is to combine thin and durable facings with a light-weight core and the choice of materials used allows obtaining the desired behaviour. Panels in consideration consist of MgO (magnesium oxide) board facings and expanded polystyrene core and are characterized by immunity to biological corrosion, a high thermal insulation and a relatively low impact on environment. Customizing the range of panels to meet market needs requires frequent size changes, leading to different failure modes, which are identified in a series of costly full-scale laboratory tests. A nonlinear numerical model was created with a use of a commercial ABAQUS code and a user-defined procedure, which is able to reproduce observed failure mechanisms; its parameters were established on the basis of small-scale tests and numerical experiments. The model was validated by a comparison with the results of the full-scale bending and compression tests. The results obtained were in satisfactory agreement with the test data.

Group vs. single mindfulness meditation: exploring avoidance, impulsivity, and weight management in two separate mindfulness meditation settings.

PubMed

Mantzios, Michail; Giannou, Kyriaki

2014-07-01

Recent research has identified that mindfulness meditation in group settings supports people who are trying to lose weight. The present research investigated mindfulness meditation in group and individual settings, and explored the potential impact on weight loss and other factors (i.e. mindfulness, impulsivity, and avoidance) that may assist or hinder weight loss. Specifically, the hypotheses tested were that the group setting assisted dieters more than the individual setting by reducing weight, cognitive-behavioral avoidance, and impulsivity and by increasing mindfulness. Participants (n = 170) who were trying to lose weight were randomly assigned to practice meditation for 6 weeks within a group or independently. Measurements in mindfulness, cognitive-behavioral avoidance, impulsivity, and weight occurred twice (pre- and post-intervention). Results indicated that participants in the group setting lost weight and lowered their levels of cognitive-behavioral avoidance, while impulsivity and mindfulness remained stable. On the other hand, participants in the individual condition lost less weight, while there was an increase in cognitive-behavioral avoidance and mindfulness scores, but a decrease in impulsivity. Seeing that benefits and limitations observed in group settings are not replicated when people meditate alone, this study concluded that mindfulness meditation in individual settings needs to be used with caution, although there are some potential benefits that could aid future weight loss research. © 2014 The International Association of Applied Psychology.

Properties of five toughened matrix composite materials

NASA Technical Reports Server (NTRS)

Cano, Roberto J.; Dow, Marvin B.

1992-01-01

The use of toughened matrix composite materials offers an attractive solution to the problem of poor damage tolerance associated with advanced composite materials. In this study, the unidirectional laminate strengths and moduli, notched (open-hole) and unnotched tension and compression properties of quasi-isotropic laminates, and compression-after-impact strengths of five carbon fiber/toughened matrix composites, IM7/E7T1-2, IM7/X1845, G40-800X/5255-3, IM7/5255-3, and IM7/5260 have been evaluated. The compression-after-impact (CAI) strengths were determined primarily by impacting quasi-isotropic laminates with the NASA Langley air gun. A few CAI tests were also made with a drop-weight impactor. For a given impact energy, compression after impact strengths were determined to be dependent on impactor velocity. Properties and strengths for the five materials tested are compared with NASA data on other toughened matrix materials (IM7/8551-7, IM6/1808I, IM7/F655, and T800/F3900). This investigation found that all five materials were stronger and more impact damage tolerant than more brittle carbon/epoxy composite materials currently used in aircraft structures.

Feasibility and effectiveness of an automated bilingual text message intervention for weight loss: pilot study.

PubMed

Kolodziejczyk, Julia K; Norman, Gregory J; Barrera-Ng, Angelica; Dillon, Lindsay; Marshall, Simon; Arredondo, Elva; Rock, Cheryl L; Raab, Fred; Griswold, William G; Sullivan, Mark; Patrick, Kevin

2013-11-06

Little is known about the feasibility and acceptability of tailored text message based weight loss programs for English and Spanish-language speakers. This pilot study evaluated the feasibility, acceptability, and estimated impact of a tailored text message based weight loss program for English and Spanish-language speakers. The purpose of this pilot study was to inform the development of a full-scale randomized trial. There were 20 overweight or obese participants (mean age 40.10, SD 8.05; 8/20, 40% male; 9/20, 45% Spanish-speakers) that were recruited in San Diego, California, from March to May 2011 and evaluated in a one-group pre/post clinical trial. For 8 weeks, participants received and responded to 3-5 text messages daily sent from a fully automated text messaging system. They also received printed weight loss materials and brief 10-15 minute weekly counseling calls. To estimate the impact of the program, the primary outcome was weight (kg) measured during face-to-face measurement visits by trained research staff. Pre and post differences in weight were analyzed with a one-way repeated measures analysis of variance. Differences by language preference at both time points were analyzed with t tests. Body mass index and weight management behaviors also were examined. Feasibility and acceptability were determined by recruitment success, adherence (ie, percentage of replies to interactive text messages and attrition), and participant satisfaction. Participants who completed the final assessment (N=18) decreased body weight by 1.85 kg (F1,17=10.80, P=.004, CI∆ 0.66-3.03, η(2)=0.39). At both time points, there were no differences in weight by language preference. Participants responded to 88.04% (986/1120) of interactive text messages, attrition rate was 10% (2/20), and 94% (19/20) of participants reported satisfaction with the program. This fully automated text message based weight program was feasible with English and Spanish-speakers and may have promoted modest weight loss over an 8-week period. Clinicaltrials.gov NCT01171586; http://clinicaltrials.gov/ct2/show/NCT01171586 (Archived by WebCite at http://www.webcitation.org/6Ksr6dl7n).

The effects of reality television on weight bias: an examination of The Biggest Loser.

PubMed

Domoff, Sarah E; Hinman, Nova G; Koball, Afton M; Storfer-Isser, Amy; Carhart, Victoria L; Baik, Kyoung D; Carels, Robert A

2012-05-01

Weight-loss reality shows, a popular form of television programming, portray obese individuals and their struggles to lose weight. While the media is believed to reinforce obesity stereotypes and contribute to weight stigma, it is not yet known whether weight-loss reality shows have any effect on weight bias. The goal of this investigation was to examine how exposure to 40-min of The Biggest Loser impacted participants' levels of weight bias. Fifty-nine participants (majority of whom were white females) were randomly assigned to either an experimental (one episode of The Biggest Loser) or control (one episode of a nature reality show) condition. Levels of weight bias were measured by the Implicit Associations Test (IAT), the Obese Person Trait Survey (OPTS), and the Anti-fat Attitudes scale (AFA) at baseline and following the episode viewing (1 week later). Participants in The Biggest Loser condition had significantly higher levels of dislike of overweight individuals and more strongly believed that weight is controllable after the exposure. No significant condition effects were found for implicit bias or traits associated with obese persons. Exploratory analyses examining moderation of the condition effect by BMI and intention to lose weight indicated that participants who had lower BMIs and were not trying to lose weight had significantly higher levels of dislike of overweight individuals following exposure to The Biggest Loser compared to similar participants in the control condition. These results indicate that anti-fat attitudes increase after brief exposure to weight-loss reality television.

Weight outcomes audit in 1.3 million adults during their first 3 months' attendance in a commercial weight management programme.

PubMed

Stubbs, R James; Morris, Liam; Pallister, Carolyn; Horgan, Graham; Lavin, Jacquie H

2015-09-10

Over sixty percent of adults in the UK are now overweight/obese. Weight management on a national scale requires behavioural and lifestyle solutions that are accessible to large numbers of people. Evidence suggests commercial weight management programmes help people manage their weight but there is little research examining those that pay to attend such programmes rather than being referred by primary care. The objective of this analysis was to evaluate the effectiveness of a UK commercial weight management programme in self-referred, fee-paying participants. Electronic weekly weight records were collated for self-referred, fee-paying participants of Slimming World groups joining between January 2010 and April 2012. This analysis reports weight outcomes in 1,356,105 adult, non-pregnant participants during their first 3 months' attendance. Data were analysed by regression, ANOVA and for binomial outcomes, chi-squared tests using the R statistical program. Mean (SD) age was 42.3 (13.6) years, height 1.65 m (0.08) and start weight was 88.4 kg (18.8). Mean start BMI was 32.6 kg/m(2) (6.3 kg/m(2)) and 5 % of participants were men. Mean weight change of all participants was -3.9 kg (3.6), percent weight change -4.4 (3.8), and BMI change was -1.4 kg/m(2) (1.3). Mean attendance was 7.8 (4.3) sessions in their first 3 months. For participants attending at least 75 % of possible weekly sessions (n = 478,772), mean BMI change was -2.5 kg/m(2) (1.3), weight change -6.8 kg (3.7) and percent weight change -7.5 % (3.5). Weight loss was greater in men than women absolutely (-6.5 (5.3) kg vs -3.8 (3.4) kg) and as a percentage (5.7 % (4.4) vs 4.3 % (3.7)), respectively. All comparisons were significant (p < 0.001). Level of attendance and percent weight loss in the first week of attendance together accounted for 55 % of the variability in weight lost during the study period. A large-scale commercial lifestyle-based weight management programme had a significant impact on weight loss outcomes over 3 months. Higher levels of attendance led to levels of weight loss known to be associated with significant clinical benefits, which on this scale may have an impact on public health.

Load Transmission Through Artificial Hip Joints due to Stress Wave Loading

NASA Astrophysics Data System (ADS)

Tanabe, Y.; Uchiyama, T.; Yamaoka, H.; Ohashi, H.

Since wear of the polyethylene (Ultra High Molecular Weight Polyethylene or UHMWPE) acetabular cup is considered to be the main cause of loosening of the artificial hip joint, the cross-linked UHMWPE with high durability to wear has been developed. This paper deals with impact load transmission through the complex of an artificial hip joint consisting of a UHMWPE acetabular cup (or liner), a metallic femoral head and stem. Impact compressive tests on the complex were performed using the split-Hopkinson pressure bar apparatus. To investigate the effects of material (conventional or cross-linked UHMWPE), size and setting angle of the liner, and test temperature on force transmission, the impact load transmission ratio (ILTR) was experimentally determined. The ILTR decreased with an increase of the setting angle independent of material and size of the liner, and test temperature. The ILTR values at 37°C were larger than those at 24 °C and 60°C. The ILTR also appeared to be affected by the type of material as well as size of the liner.

Selecting the correct weighting factors for linear and quadratic calibration curves with least-squares regression algorithm in bioanalytical LC-MS/MS assays and impacts of using incorrect weighting factors on curve stability, data quality, and assay performance.

PubMed

Gu, Huidong; Liu, Guowen; Wang, Jian; Aubry, Anne-Françoise; Arnold, Mark E

2014-09-16

A simple procedure for selecting the correct weighting factors for linear and quadratic calibration curves with least-squares regression algorithm in bioanalytical LC-MS/MS assays is reported. The correct weighting factor is determined by the relationship between the standard deviation of instrument responses (σ) and the concentrations (x). The weighting factor of 1, 1/x, or 1/x(2) should be selected if, over the entire concentration range, σ is a constant, σ(2) is proportional to x, or σ is proportional to x, respectively. For the first time, we demonstrated with detailed scientific reasoning, solid historical data, and convincing justification that 1/x(2) should always be used as the weighting factor for all bioanalytical LC-MS/MS assays. The impacts of using incorrect weighting factors on curve stability, data quality, and assay performance were thoroughly investigated. It was found that the most stable curve could be obtained when the correct weighting factor was used, whereas other curves using incorrect weighting factors were unstable. It was also found that there was a very insignificant impact on the concentrations reported with calibration curves using incorrect weighting factors as the concentrations were always reported with the passing curves which actually overlapped with or were very close to the curves using the correct weighting factor. However, the use of incorrect weighting factors did impact the assay performance significantly. Finally, the difference between the weighting factors of 1/x(2) and 1/y(2) was discussed. All of the findings can be generalized and applied into other quantitative analysis techniques using calibration curves with weighted least-squares regression algorithm.

The Connectivity Between Site-Specific Life Cycle Impact Assessment and Site-Specific Weighting

EPA Science Inventory

The goal of many LCIAs is to come to a single score with all of the impacts from a wide variety of impact assessments weighted to form this single score. My past experiences with developing site-specific impact assessment methodologies and how this can change the valuation porti...

Effect of olympic weight category on performance in the roundhouse kick to the head in taekwondo.

PubMed

Estevan, Isaac; Falco, Coral; Alvarez, Octavio; Molina-García, Javier

2012-03-01

In taekwondo, kick performance is generally measured using impact force and time. This study aimed to analyse performance in the roundhouse kick to the head according to execution distance between and within Olympic weight categories. The participants were 36 male athletes divided into three categories: featherweight (n = 10), welterweight (n = 15) and heavyweight (n = 11). Our results show that taekwondo athletes in all weight categories generate a similar relative impact force. However, the results indicate that weight has a large impact on kick performance, particularly in relation to total response time.

Effect of Olympic Weight Category on Performance in the Roundhouse Kick to the Head in Taekwondo

PubMed Central

Estevan, Isaac; Falco, Coral; Álvarez, Octavio; Molina-García, Javier

2012-01-01

In taekwondo, kick performance is generally measured using impact force and time. This study aimed to analyse performance in the roundhouse kick to the head according to execution distance between and within Olympic weight categories. The participants were 36 male athletes divided into three categories: featherweight (n = 10), welterweight (n = 15) and heavyweight (n = 11). Our results show that taekwondo athletes in all weight categories generate a similar relative impact force. However, the results indicate that weight has a large impact on kick performance, particularly in relation to total response time. PMID:23486074

Combined exposure to low doses of pesticides causes decreased birth weights in rats.

PubMed

Hass, Ulla; Christiansen, Sofie; Axelstad, Marta; Scholze, Martin; Boberg, Julie

2017-09-01

Decreased birth weight is a common effect of many pesticides in reproductive toxicity studies, but there are no empirical data on how pesticides act in combination on this endpoint. We hypothesized that a mixture of six pesticides (cyromazine, MCPB, pirimicarb, quinoclamine, thiram, and ziram) would decrease birth weight, and that these mixture effects could be predicted by the Dose Addition model. Data for the predictions were obtained from the Draft Assessment Reports of the individual pesticides. A mixture of equi-effective doses of these pesticides was tested in two studies in Wistar rats, showing mixture effects in good agreement with the additivity predictions. Significantly lower birth weights were observed when compounds were present at individual doses below their no-observed adverse effect levels (NOAELs). These results emphasize the need for cumulative risk assessment of pesticides to avoid potentially serious impact of mixed exposure on prenatal development and pregnancy in humans. Copyright © 2017 Elsevier Inc. All rights reserved.

The impact of acculturation level on weight status and weight outcomes in Hispanic children

USDA-ARS?s Scientific Manuscript database

Previous studies revealed that higher levels of acculturation are related to obesity in Hispanic adults. Conflicting findings exist regarding this relationship in children, and little is known about the impact of acculturation on children's success in pediatric weight management programs. The purpos...

General aviation accidents related to exceedance of airplane weight/center of gravity limits.

PubMed

Boyd, Douglas D

2016-06-01

Obesity, affects a third of the US population and its corollary occupant weight adversely impacts safe flight operations. Increased aircraft weight results in longer takeoff/landing distances, degraded climb gradients and airframe failure may occur in turbulence. In this study, the rate, temporal changes, and lethality of accidents in piston-powered, general aviation aircraft related to exceeding the maximum aircraft weight/center of gravity (CG) limits were determined. Nation-wide person body mass were from the National Health and Nutrition Examination Survey. The NTSB database was used to identify accidents related to operation of aircraft outside of their weight/CG envelope. Statistical analyses employed T-tests, proportion tests and a Poisson distribution. While the average body mass climbed steadily (p<0.001) between 1999 and 2014 the rate of accidents related to exceedance of the weight/CG limits did not change (p=0.072). However, 57% were fatal, higher (p<0.001) than the 21% for mishaps attributed to other causes/factors. The majority (77%) of accidents were due to an overloaded aircraft operating within its CG limits. As to the phase of flight, accidents during takeoff and those occurring enroute carried the lowest (50%) and highest (85%) proportion of fatal accidents respectively. While the rate of general aviation accidents related to operating an aircraft outside of its weight/CG envelope has not increased over the past 15 years, these types of accidents carry a high risk of fatality. Airmen should be educated as to such risks and to dispel the notion held by some that flights may be safely conducted with an overloaded aircraft within its CG limits. Copyright © 2016 Elsevier Ltd. All rights reserved.

The accuracy of parent-reported height and weight for 6-12 year old U.S. children.

PubMed

Wright, Davene R; Glanz, Karen; Colburn, Trina; Robson, Shannon M; Saelens, Brian E

2018-02-12

Previous studies have examined correlations between BMI calculated using parent-reported and directly-measured child height and weight. The objective of this study was to validate correction factors for parent-reported child measurements. Concordance between parent-reported and investigator measured child height, weight, and BMI (kg/m 2 ) among participants in the Neighborhood Impact on Kids Study (n = 616) was examined using the Lin coefficient, where a value of ±1.0 indicates perfect concordance and a value of zero denotes non-concordance. A correction model for parent-reported height, weight, and BMI based on commonly collected demographic information was developed using 75% of the sample. This model was used to estimate corrected measures for the remaining 25% of the sample and measured concordance between correct parent-reported and investigator-measured values. Accuracy of corrected values in classifying children as overweight/obese was assessed by sensitivity and specificity. Concordance between parent-reported and measured height, weight and BMI was low (0.007, - 0.039, and - 0.005 respectively). Concordance in the corrected test samples improved to 0.752 for height, 0.616 for weight, and 0.227 for BMI. Sensitivity of corrected parent-reported measures for predicting overweight and obesity among children in the test sample decreased from 42.8 to 25.6% while specificity improved from 79.5 to 88.6%. Correction factors improved concordance for height and weight but did not improve the sensitivity of parent-reported measures for measuring child overweight and obesity. Future research should be conducted using larger and more nationally-representative samples that allow researchers to fully explore demographic variance in correction coefficients.

Study of the relation between body weight and functional limitations and pain in patients with knee osteoarthritis

PubMed Central

Alfieri, Fábio Marcon; Silva, Natália Cristina de Oliveira Vargas e; Battistella, Linamara Rizzo

2017-01-01

ABSTRACT Objective To assess the influence of the body weight in functional capacity and pain of adult and elderly individuals with knee osteoarthritis. Methods The sample consisted of 107 adult and elderly patients with knee osteoarthritis divided into two groups (adequate weight/adiposity and excessive weight/adiposity) according to body mass index and percent of body fat mass, assessed by electric bioimpedance. Subjects were evaluated for functional mobility (Timed Up and Go Test), pain, stiffness and function (Western Ontario and MacMaster Universities Osteoarthritis Index − WOMAC), pain intensity (Visual Analogue Scale − VAS) and pressure pain tolerance threshold (algometry in vastus medialis and vastus lateralis muscles). Data were analyzed with Statistical Package of the Social Sciences, version 22 for Windows. Comparisons between groups were made through Student’s t test, with significance level set at 5%. Results There was predominance of females in the sample (81.3%), and mean age was 61.8±10.1 years. When dividing the sample by both body mass index and adiposity, 89.7% of them had weight/adiposity excess, and 59.8% were obese. There was no difference between groups regarding age, pain intensity, pressure pain tolerance threshold, functional mobility, stiffness and function. However, pain (WOMAC) was higher (p=0.05) in the group of patients with weight or adiposity excess, and pain perception according to VAS was worse in the group of obese patients (p=0.05). Conclusion Excessive weight had negative impact in patients with osteoarthritis, increasing pain assessed by WOMAC or VAS, although no differences were observed in functionality and pressure pain tolerance. PMID:29091152

Weight gain in preterm infants following parent-administered Vimala massage: a randomized controlled trial.

PubMed

Gonzalez, Alma Patricia; Vasquez-Mendoza, Guadalupe; García-Vela, Alfonso; Guzmán-Ramirez, Andres; Salazar-Torres, Marcos; Romero-Gutierrez, Gustavo

2009-04-01

Massage has been proposed as a way of facilitating development and growth of newborns through its effects on increasing blood flow, heart rate, digestion, and immunity. Massage might increase basal metabolism and nutrient absorption through endocrine effects such as increase in insulin and adrenaline and decrease in cortisol. Preliminary studies have suggested significant impact on weight gain with shortening of in-hospital stays of up to 6 days. We compared weight gain among preterm infants receiving Vimala massage plus usual care versus usual care alone. A randomized controlled trial was conducted. Sixty clinically stable preterm newborns with a corrected gestational age of 30 to 35 weeks receiving enteral nutrition in the hospital nursery were included. Half of them were assigned at random to receive Vimala massage twice daily for 10 days plus usual nursery care; the others received usual nursery care. Weight, head circumference, caloric intake, and nutritional method were recorded daily. Group characteristics were compared with analysis of variance, T test, and chi (2) test as appropriate. There were no differences between groups in gender, gestational age, initial weight, head circumference, and caloric intake and type of nutrition at baseline. Infants receiving massage had a larger weight gain versus the control group since the third day (188.2 +/- 41.20 g/kg versus 146.7 +/- 56.43 g/kg, P < 0.001). Hospital stay was shorter in infants receiving massage and usual nursery care (15.63 +/- 5.41 days versus 19.33 +/- 7.92 days, P = 0.03). The addition of parent-administered Vimala massage to usual nursery care resulted in increased weight gain and shorter hospital stay among clinically stable preterm newborns.

The role of sex and body weight on the metabolic effects of high-fat diet in C57BL/6N mice.

PubMed

Ingvorsen, C; Karp, N A; Lelliott, C J

2017-04-10

Metabolic disorders are commonly investigated using knockout and transgenic mouse models on the C57BL/6N genetic background due to its genetic susceptibility to the deleterious metabolic effects of high-fat diet (HFD). There is growing awareness of the need to consider sex in disease progression, but limited attention has been paid to sexual dimorphism in mouse models and its impact in metabolic phenotypes. We assessed the effect of HFD and the impact of sex on metabolic variables in this strain. We generated a reference data set encompassing glucose tolerance, body composition and plasma chemistry data from 586 C57BL/6N mice fed a standard chow and 733 fed a HFD collected as part of a high-throughput phenotyping pipeline. Linear mixed model regression analysis was used in a dual analysis to assess the effect of HFD as an absolute change in phenotype, but also as a relative change accounting for the potential confounding effect of body weight. HFD had a significant impact on all variables tested with an average absolute effect size of 29%. For the majority of variables (78%), the treatment effect was modified by sex and this was dominated by male-specific or a male stronger effect. On average, there was a 13.2% difference in the effect size between the male and female mice for sexually dimorphic variables. HFD led to a significant body weight phenotype (24% increase), which acts as a confounding effect on the other analysed variables. For 79% of the variables, body weight was found to be a significant source of variation, but even after accounting for this confounding effect, similar HFD-induced phenotypic changes were found to when not accounting for weight. HFD and sex are powerful modifiers of metabolic parameters in C57BL/6N mice. We also demonstrate the value of considering body size as a covariate to obtain a richer understanding of metabolic phenotypes.

Delta Healthy Sprouts: a randomized comparative effectiveness trial to promote maternal weight control and reduce childhood obesity in the Mississippi Delta.

PubMed

Thomson, Jessica L; Tussing-Humphreys, Lisa M; Goodman, Melissa H

2014-05-01

Excessive and inadequate gestational weight gain can complicate a woman's pregnancy and put her and her child at risk for poor delivery and birth outcomes. Further, feeding and activity habits established early in life can significantly impact the development of childhood obesity. The on-going Delta Healthy Sprouts Project is a randomized, controlled, comparative trial testing the efficacy of two Maternal, Infant, and Early Childhood Home Visiting programs on weight status and health behaviors of 150 mothers and their infants residing in the rural Mississippi Delta region of the United States. Women are enrolled in their second trimester of pregnancy and randomized to one of two treatment arms. The control arm curriculum is based on Parents as Teachers, an evidence based approach to increase parental knowledge of child development and improve parenting practices. The experimental arm, labeled Parents as Teachers Enhanced, builds upon the control curriculum by including culturally tailored nutrition and physical activity components specifically designed for the gestational and postnatal periods. We hypothesize that, as compared to the control arm, the experimental arm will be more effective in preventing inappropriate gestational weight gain, reducing postnatal weight retention, and decreasing infant obesity rates. We also will evaluate mother and child dietary and physical activity outcomes, breastfeeding initiation and continuation, and child feeding practices. The Delta Healthy Sprouts Project tests a novel, combined approach to maternal weight management and childhood obesity prevention in pregnant women and their children at high risk for obesity and chronic disease. Published by Elsevier Inc.

The impact of gestational weight gain in different trimesters of pregnancy on glucose challenge test and gestational diabetes.

PubMed

Hantoushzadeh, Sedigheh; Sheikh, Mahdi; Bosaghzadeh, Zeynab; Ghotbizadeh, Fahimeh; Tarafdari, Azam; Panahi, Zahra; Shariat, Mamak

2016-09-01

Assessing the effects of excessive weight gain before pregnancy, in the first and second trimesters and in the month preceding glucose challenge test (GCT) on GCT results and gestational diabetes mellitus (GDM). This prospective cohort study evaluated 1279 pregnant women who were referred for their first prenatal visit in 2012-2015. Mother's body mass index (BMI) was recorded before pregnancy, during the first visit and every 4 weeks until 28 gestational weeks. All mothers underwent GCT at 28 weeks and when 1 h glucose ≥140 mg/dL (≥7.8 mmol/L), they were referred for a 100 g fasting glucose 3 h glucose tolerance test. Obesity and being overweight prior to pregnancy were associated with 2.8-fold and 1.5-fold higher rates of developing GDM (p<0.001, p=0.04) and 1.9-fold and 1.8-fold higher rates of having false-positive GCT results (p<0.001). First-trimester excessive weight gain was significantly associated with false-positive GCT in women who were lean, overweight and obese before pregnancy (all p<0.001). When these women kept gaining excessive weight during the subsequent period the risk of developing GDM was significantly increased regardless of their pre-pregnancy BMI (p=0.03). When these women adhered to the recommended weight gain during the subsequent period, the risk of developing GDM was not increased, however the risk of having false-positive GCT remained high (p<0.001). Elevated pre-pregnancy BMI independently increases the risk of GDM and false-positive GCT. First trimester weight gain is the most important predictor of GCT and GDM regardless of pre-pregnancy BMI. The weight gain during the subsequent period affects the risk of developing GDM only in women with excessive first-trimester weight gain. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Full-Scale Cask Testing and Public Acceptance of Spent Nuclear Fuel Shipments - 12254

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dilger, Fred; Halstead, Robert J.; Ballard, James D.

Full-scale physical testing of spent fuel shipping casks has been proposed by the National Academy of Sciences (NAS) 2006 report on spent nuclear fuel transportation, and by the Presidential Blue Ribbon Commission (BRC) on America's Nuclear Future 2011 draft report. The U.S. Nuclear Regulatory Commission (NRC) in 2005 proposed full-scale testing of a rail cask, and considered 'regulatory limits' testing of both rail and truck casks (SRM SECY-05-0051). The recent U.S. Department of Energy (DOE) cancellation of the Yucca Mountain project, NRC evaluation of extended spent fuel storage (possibly beyond 60-120 years) before transportation, nuclear industry adoption of very largemore » dual-purpose canisters for spent fuel storage and transport, and the deliberations of the BRC, will fundamentally change assumptions about the future spent fuel transportation system, and reopen the debate over shipping cask performance in severe accidents and acts of sabotage. This paper examines possible approaches to full-scale testing for enhancing public confidence in risk analyses, perception of risk, and acceptance of spent fuel shipments. The paper reviews the literature on public perception of spent nuclear fuel and nuclear waste transportation risks. We review and summarize opinion surveys sponsored by the State of Nevada over the past two decades, which show consistent patterns of concern among Nevada residents about health and safety impacts, and socioeconomic impacts such as reduced property values along likely transportation routes. We also review and summarize the large body of public opinion survey research on transportation concerns at regional and national levels. The paper reviews three past cask testing programs, the way in which these cask testing program results were portrayed in films and videos, and examines public and official responses to these three programs: the 1970's impact and fire testing of spent fuel truck casks at Sandia National Laboratories, the 1980's regulatory and demonstration testing of MAGNOX fuel flasks in the United Kingdom (the CEGB 'Operation Smash Hit' tests), and the 1980's regulatory drop and fire tests conducted on the TRUPACT II containers used for transuranic waste shipments to the Waste Isolation Pilot Plant in New Mexico. The primary focus of the paper is a detailed evaluation of the cask testing programs proposed by the NRC in its decision implementing staff recommendations based on the Package Performance Study, and by the State of Nevada recommendations based on previous work by Audin, Resnikoff, Dilger, Halstead, and Greiner. The NRC approach is based on demonstration impact testing (locomotive strike) of a large rail cask, either the TAD cask proposed by DOE for spent fuel shipments to Yucca Mountain, or a similar currently licensed dual-purpose cask. The NRC program might also be expanded to include fire testing of a legal-weight truck cask. The Nevada approach calls for a minimum of two tests: regulatory testing (impact, fire, puncture, immersion) of a rail cask, and extra-regulatory fire testing of a legal-weight truck cask, based on the cask performance modeling work by Greiner. The paper concludes with a discussion of key procedural elements - test costs and funding sources, development of testing protocols, selection of testing facilities, and test peer review - and various methods of communicating the test results to a broad range of stakeholder audiences. (authors)« less

40 CFR 86.229-94 - Road load force, test weight, and inertia weight class determination.

Code of Federal Regulations, 2013 CFR

2013-07-01

... inertia weight class determination. 86.229-94 Section 86.229-94 Protection of Environment ENVIRONMENTAL... § 86.229-94 Road load force, test weight, and inertia weight class determination. (a) Flywheels... vehicle weight (pounds) Equivalent test weight (pounds) Inertia weight class (pounds) Up-1,062 1,000 1,000...

40 CFR 86.229-94 - Road load force, test weight, and inertia weight class determination.

Code of Federal Regulations, 2011 CFR

2011-07-01

... inertia weight class determination. 86.229-94 Section 86.229-94 Protection of Environment ENVIRONMENTAL... § 86.229-94 Road load force, test weight, and inertia weight class determination. (a) Flywheels... vehicle weight (pounds) Equivalent test weight (pounds) Inertia weight class (pounds) Up-1,062 1,000 1,000...

40 CFR 86.229-94 - Road load force, test weight, and inertia weight class determination.

Code of Federal Regulations, 2012 CFR

2012-07-01

... inertia weight class determination. 86.229-94 Section 86.229-94 Protection of Environment ENVIRONMENTAL... § 86.229-94 Road load force, test weight, and inertia weight class determination. (a) Flywheels... vehicle weight (pounds) Equivalent test weight (pounds) Inertia weight class (pounds) Up-1,062 1,000 1,000...

Calorie Labeling in Chain Restaurants and Body Weight: Evidence from New York.

PubMed

Restrepo, Brandon J

2017-10-01

This study analyzes the impact of local mandatory calorie labeling laws implemented by New York jurisdictions on body weight. The analysis indicates that on average the point-of-purchase provision of calorie information on chain restaurant menus reduced body mass index (BMI) by 1.5% and lowered the risk of obesity by 12%. Quantile regression results indicate that calorie labeling has similar impacts across the BMI distribution. An analysis of heterogeneity suggests that calorie labeling has a larger impact on the body weight of lower income individuals, especially lower income minorities. The estimated impacts of calorie labeling on physical activity, smoking, and the consumption of alcoholic beverages, fruits, and vegetables are small in magnitude, which suggests that other margins of adjustment drive the body-weight impacts estimated here. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Welfare Assessment following Heterotopic or Orthotopic Inoculation of Bladder Cancer in C57BL/6 Mice.

PubMed

Miller, Amy; Burson, Hannah; Söling, Ariane; Roughan, Johnny

2016-01-01

Few studies have assessed whether mice used as cancer models experience pain. Despite this possibility, the usual practice is to withhold analgesics as these are generally viewed as confounding. However, pain also alters cancer progression, so preventing it might not only be beneficial to welfare but also to study validity. Establishing the extent to which different cancer models result in pain is an important first step towards their refinement. We used conditioned place preference (CPP) testing and body-weight and behaviour analyses to evaluate the assumption that heterotopically implanted tumours result in less pain and fewer welfare concerns than those implanted orthotopically. C57Bl/6 mice received MB49Luc luciferase expressing bladder cancer cells or saline implanted subcutaneously or into the bladder. These tumour-bearing or control groups underwent 2 daily 45 minute conditioning trials to saline or morphine (2mg/kg) and then a 15 minute drug-free preference test on day 3 of a 3 day cycle, continuing until the study ended. Tumours were imaged and behaviour data obtained following preference tests. Development of preference for the morphine-paired chamber (morphine-seeking) was determined over time. Heterotopic tumour development had no effect on morphine-seeking, and although the restraint used for heterotopic inoculation caused greater initial weight losses than anaesthesia, these mice steadily gained weight and behaved comparatively normally throughout the study. Orthotopic tumour inoculation caused no initial weight losses, but over the final 7 days these mice became less active and lost more body weight than cancer-free controls. This indicated orthotopic implantation probably caused a more negative impact on welfare or conceivably pain; but only according to the current test methods. Pain could not be confirmed because morphine-seeking in the tumour-bearing groups was similar to that seen in controls. Imaging was not found to be an effective method of monitoring tumour development surpassing manual tumour inspection.

Differences in taste detection thresholds between normal-weight and obese young adults.

PubMed

Park, Dong Choon; Yeo, Joon Hyung; Ryu, In Yong; Kim, Sang Hoon; Jung, Junyang; Yeo, Seung Geun

2015-05-01

Compared with normal-weight individuals, obese young adults exhibited a significantly higher taste threshold for salty taste. Smoking also affected taste functions in this population. The aim of this study was to investigate the differences in taste detection thresholds between normal-weight and obese young adults. Taste threshold was measured using electrogustometry (EGM) and chemically with sucrose, NaCl, citric acid, and quinine hydrochloride in 41 volunteers in their twenties, 23 with body mass index (BMI) <23 kg/m(2) (normal-weight group) and 18 with BMI >25 kg/m(2) (obese group). BMI was significantly higher in the obese than in the normal-weight group (p < 0.05). The obese group exhibited significantly higher EGM thresholds than the normal-weight group on the right (p < 0.05) and left (p < 0.05) posterior tongue. In chemical taste tests, the obese group had higher thresholds for sweet, salty, sour, and bitter tastes than the normal-weight group, although the difference in threshold was significant only for salty taste (p < 0.05). Smoking had an impact on taste threshold, with smokers having higher thresholds than non-smokers, with significantly higher EGM thresholds on the right anterior and posterior and the left anterior tongue (p < 0.05 each).

Association of the relative change in weight and body mass index with lung function in teenagers and adults with cystic fibrosis: Influence of gender and diabetes.

PubMed

Cano Megías, Marta; Guisado Vasco, Pablo; González Albarrán, Olga; Lamas Ferreiro, Adelaida; Máiz Carro, Luis

2015-11-01

Nutritional status is a prognostic factor in cystic fibrosis. Prevention of nutritional impairment and weigh loss are major clinical objectives because they are associated with worsening of lung function and increased mortality. To identify a potential relationship of clinical nutrition parameters, and their relative changes, with lung function (FEV1%) in a cohort of adolescent and adult patients with CF. A retrospective analysis of 64 patients older than 14years. Weight, height, BMI, and lung function data were collected at a period of disease stability, both in the year of the first abnormal oral glucose tolerance test (OGTT) and in the previous year. Relative changes in weight and BMI, and their relationship with FEV1%, were determined by linear regression and ANOVA tests; influence of gender and diabetes was also assessed. Mean age of the series (28 females and 36 males) was 26.8years. Normal glucose tolerance (NGT) was found in 26.7%, while 18.3% had diabetes without impaired fasting glucose (CFRD without FPG). Mean BMI was 20.32, with a mean weight of 53.53kg; 32.8% had BMI<18.5, and only 4.7% were overweight. Overall, a positive relative change in weight (≥6%) was associated with an increase in FEV1% (9.31%), as compared to those with a greater weight loss (at least 2%), who had a 12.09% fall in FEV1. Patients with CFRD without FPG had poorer lung function if they had a negative relative change in weight by at least 2% as compared to NGT. In patients with CF, a relative weight gain is positively associated to FEV1%, while a relative weight loss of at least 2% has a significant negative impact on lung function. Copyright © 2015 SEEN. Published by Elsevier España, S.L.U. All rights reserved.

Relations among questionnaire and laboratory measures of rhinovirus infection.

PubMed

Barrett, B; Brown, R; Voland, R; Maberry, R; Turner, R

2006-08-01

Due to high incidence and quality-of-life impact, upper respiratory infection substantially impacts on population health. To test or compare treatment effectiveness, a well-designed and validated illness-specific quality-of-life instrument is needed. Data reported in the current study were obtained from a trial testing echinacea for induced rhinovirus infection. Laboratory-assessed biomarkers included interleukin (IL)-8, nasal neutrophil count (polymorphonuclear neutrophils (PMN)), mucus weight, viral titre and seroconversion. The questionnaires used included the general health short form (SF)-8 (24-h recall version), the eight-item Jackson cold scale, and the 44-item Wisconsin Upper Respiratory Symptom Survey (WURSS). In total, 399 participants were inoculated with rhinovirus and monitored over 2,088 person-days. Statistically significant associations were found among nearly all variables. Between-questionnaire correlations were: WURSS-Jackson = 0.81; WURSS-SF-8 = 0.62; and Jackson-SF-8 = 0.60. Correlations with laboratory values were as follows: WURSS-mucus weight = 0.53; Jackson-mucus weight = 0.55; WURSS-viral titre = 0.37; Jackson-viral titre = 0.46; WURSS-IL-8 = 0.31; Jackson-IL-8 = 0.36; WURSS-PMN = 0.31; and Jackson-PMN = 0.28. Neither WURSS nor Jackson yielded satisfactory cut-off scores for diagnosis of infection. Symptomatic and biological outcomes of upper respiratory infection are highly variable, with only modest associations. While Wisconsin Upper Respiratory Symptom Survey and Jackson questionnaires both correlate with biomarkers, neither is a good predictor of induced infection. The inclusion of functional and quality-of-life items in the Wisconsin Upper Respiratory Symptom Survey does not significantly decrease the strength of association with laboratory-assessed biomarkers.

Language development in preschool children born after asymmetrical intrauterine growth retardation.

PubMed

Simić Klarić, Andrea; Kolundžić, Zdravko; Galić, Slavka; Mejaški Bošnjak, Vlatka

2012-03-01

After intrauterine growth retardation, many minor neurodevelopmental disorders may occur, especially in the motor skills domain, language and speech development, and cognitive functions. The assessment of language development and impact of postnatal head growth in preschool children born with asymmetrical intrauterine growth retardation. Examinees were born at term with birth weight below the 10th percentile for gestational age, parity and gender. Mean age at the time of study was six years and four months. The control group was matched according to chronological and gestational age, gender and maternal education with mean age six years and five months. There were 50 children with intrauterine growth retardation and 50 controls, 28 girls and 22 boys in each group. For the assessment of language development Reynell Developmental Language Scale, the Naming test and Mottier test were performed. There were statistically significant differences (p < 0.05) in language comprehension, total expressive language (vocabulary, structure, content), naming skills and non-words repetition. Statistically significant positive correlations were found between relative growth of the head [(Actual head circumference - head circumference at birth)/(Body weight - birth weight)] and language outcome. Children with neonatal complications had lower results (p < 0.05) in language comprehension and total expressive language. Intrauterine growth retardation has a negative impact on language development which is evident in preschool years. Slow postnatal head growth is correlated with poorer language outcome. Neonatal complications were negatively correlated with language comprehension and total expressive language. Copyright © 2011 European Paediatric Neurology Society. Published by Elsevier Ltd. All rights reserved.

The Effect of Center of Gravity and Anthropometrics on Human Performance in Simulated Lunar and Mars Gravity

NASA Technical Reports Server (NTRS)

Mulugeta, Lealem; Chappell, Steven P.

2009-01-01

Drawing from the experiences of the Apollo missions, it is evident that the off nominal center of gravity (CG) induced by the portable life support system (PLSS) had significant impact on the locomotion stability of the crew. This in turn is believed to have been a major contributor to the high numbers of falls and high metabolic rates experienced by the crew, and thus significantly hampered the crew s performance. With this in mind, the EVA Physiology, Systems and Performance (EPSP) group at the NASA Johnson Space Center (JSC) has been conducting tests to assess how spacesuit CG location impacts human performance in simulated lunar and Mars gravity. The results acquired to date show correlations between CG location and performance. However, noticeable variations in the performance data have been observed across subjects for fixed CG configurations. Consequently, it was hypothesized that this variability may be attributed to the anthropometrics of the different test subjects. It was further hypothesized that trunk-to-height ratio (THR) may be directly correlated to performance in reduced gravity; i.e. subjects with increased THR may have increased performance. To test this hypothesis, lunar and Mars gravity test data acquired over three years during NASA Neural Buoyancy Lab (NBL) tests and NASA Extreme Environment Missions Operation (NEEMO) missions were analyzed against THR, height, trunk length, and subject body mass/weight. The results of the study supported the hypothesis relating THR and performance, while the other three anthropometric parameters did not provide consistent correlations with performance. This in turn suggests that human performance in reduced gravity may be more dependent on anthropometric proportions than on body segment lengths and mass/weight.

The impact of training on women's capabilities in modifying their obesity-related dietary behaviors: applying family-centered empowerment model.

PubMed

Mataji Amirrood, Maryam; Taghdisi, Mohammad Hosein; Shidfar, Farzad; Gohari, Mahmood Reza

2014-01-01

Dietary behaviors affect obesity; therefore, it seems necessary to conduct interventions to modify behavioral patterns leading to weight-gain in the family. Our goal was to determine the impact of training on women's capabilities in modifying their obesity-related dietary behaviors in Urmia, West Azerbaijan Province, Iran: applying family-centered empowerment model. A quasi-experimental study with Pretest-Posttest design was conducted on 90 over-weight/obese women in 2012 in two Health Centers of Urmia. Convenience sampling was done and the participants were randomly assigned to two 'test' and 'control' groups. Data collection was done by completing the demographic data questionnaire, the empowerment tool and dietary behavior checklist. The intervention was conducted in the form of 6 educational classes held for the 'test' group. After two months, posttest was performed by completing the forms once again. Data were analyzed with descriptive tests, t-tests, Chi2 and Fischer's test. The dietary behavior scores of the intervention group had risen from 7.4 ± 2.11 to 9.95 ± 2.41 (P<0.001), and the good dietary behaviors had risen from 21.4% to 61.9% (P=0.002). The 'good' capability level of this group had risen from 23.8% to 97.61% (P<0.001), and their mean capability score had risen from 54.61 ± 7.34 to 70.26 ± 6.04 (P<0.001). However, the changes were not significant in the control group. The educational intervention performed whit applying family-centered empowerment model in this study was proven effective in women. Hence it is advised to consider it in behavior changing interventions to promote the health of the family and community.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Urtiew, P A; Forbes, J W; Tarver, C M

LX-04 is a widely used HMX-based plastic bonded explosive, which contains 85 weight % HMX and 15 weight % Viton binder. The sensitivity of LX-04 to a single stimulus such as heat, impact, and shock has been previously studied. However, hazard scenarios can involve multiple stimuli, such as heating to temperatures close to thermal explosion conditions followed by fragment impact, producing a shock in the hot explosive. The sensitivity of HMX at elevated temperatures is further complicated by the beta to delta solid-state phase transition, which occurs at approximately 165 C. This paper presents the results of shock initiation experimentsmore » conducted with LX-04 preheated to 190 C, as well as density measurements and small scale safety test results of the {delta} phase HMX at room temperature. This work shows that LX-04 at 190 C is more shock sensitive than LX-04 at 150 C or 170 C due to the volume increase during the {beta} to {delta} solid phase transition, which creates more hot spots, and the faster growth of reaction during shock compression.« less

40 CFR 86.229-94 - Road load force, test weight, and inertia weight class determination.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Road load force, test weight, and... § 86.229-94 Road load force, test weight, and inertia weight class determination. (a) Flywheels, electrical forces, or other means of simulating test weight as shown in the table in this paragraph shall be...

Carbon nano fibers reinforced composites origami inspired mechanical metamaterials with passive and active properties

NASA Astrophysics Data System (ADS)

Kshad, Mohamed Ali E.; D'Hondt, Clement; Naguib, Hani E.

2017-10-01

Core panels used for compression or impact damping are designed to dissipate energy and to reduce the transferred force and energy. They are designed to have high strain and deformation with low density. The geometrical configuration of such cores plays a significant role in redistributing the applied forces to dampen the compression and impact energy. Origami structures are renowned for affording large macroscopic deformation which can be employed for force redistribution and energy damping. The material selection for the fabrication of origami structures affects the core capacity to withstand compression and impact loads. Polymers are characterized by their high compression and impact resistance; the drawback of polymers is the low stiffness and elastic moduli compared with metallic materials. This work is focused on the study of the effect of Carbon Nano Fibers (CNF) on the global mechanical properties of the origami panel cores made of polymeric blends. The base matrix materials used were Polylactic Acid (PLA) and Thermoplastic Polyurethane (TPU) blends, and the percentages of the PLA/TPU were 100/0, 20/80, 65/35, 50/50, 20/80, and 0/100 as a percentage of weight. The weight percentages of CNF added to the polymeric blends were 1%, 3%, and 5%. This paper deals with the fabrication process of the polymeric reinforced blends and the origami cores, in order to predict the best fabrication conditions. The dynamic scanning calorimetry and the dynamic mechanical analyzer were used to test the reinforced blended base material for thermomechanical and viscoelastic properties. The origami core samples were fabricated using per-molded geometrical features and then tested for compression and impact properties. The results of the study were compared with previous published results which showed that there is considerable enhancement in the mechanical properties of the origami cores compared with the pure blended polymeric origami cores. The active properties of the origami unit cell made of composite polymers containing a low percentage of CNF were also investigated in this study, in which the shape memory effect test conducted on the origami unit cell.

A comparative study on the tensile and impact properties of Kevlar, carbon, and S-glass/epoxy composites reinforced with SiC particles

NASA Astrophysics Data System (ADS)

Bulut, Mehmet; Alsaadi, Mohamad; Erkliğ, Ahmet

2018-02-01

Present study compares the tensile and impact characteristics of Kevlar, carbon and glass fiber reinforced composites with addition of microscale silicon carbide (SiC) within the common matrix of epoxy. The variation of tensile and impact strength values was explored for different content of SiC in the epoxy resin by weight (0, 5, 10, 15 and 20 wt%). Resulting failure characteristics were identified by assisting Charpy impact tests. The influence of interfacial adhesion between particle and fiber/matrix on failure and tensile properties was discussed from obtained results and scanning electron microscopy (SEM) figures. It is concluded from results that the content of SiC particles, and fiber types used as reinforcement are major parameters those effecting on tensile and impact resistance of composites as a result of different interface strength properties between particle-matrix and particle-fiber.

Defining the impaction frequency and threshold force required for femoral impaction grafting in revision hip arthroplasty

PubMed Central

2011-01-01

Background and purpose The two most common complications of femoral impaction bone grafting are femoral fracture and massive implant subsidence. We investigated fracture forces and implant subsidence rates in embalmed human femurs undergoing impaction grafting. The study consisted of two arms, the first examining the force at which femoral fracture occurs in the embalmed human femur, and the second examining whether significant graft implant/subsidence occurs following impaction at a set force at two different impaction frequencies. Methods Using a standardized impaction grafting technique with modifications, an initial group of 17 femurs underwent complete destructive impaction testing, allowing sequentially increased, controlled impaction forces to be applied until femoral fracture occurred. A second group of 8 femurs underwent impaction bone grafting at constant force, at an impaction frequency of 1 Hz or 10 Hz. An Exeter stem was cemented into the neomedullary canals. These constructs underwent subsidence testing simulating the first 2 months of postoperative weight bearing. Results No femurs fractured below an impaction force of 0.5 kN. 15/17 of the femurs fractured at or above 1.6 kN of applied force. In the second group of 8 femurs, all of which underwent femoral impaction grafting at 1.6 kN, there was no correlation between implant subsidence and frequency of impaction. Average subsidence was 3.2 (1–9) mm. Interpretation It is possible to calculate a force below which no fracture occurs in the embalmed human femur undergoing impaction grafting. Higher impaction frequency at constant force did not reduce rates of implant subsidence in this experiment. PMID:21689068

Biomechanical responses of PMHS in moderate-speed rear impacts and development of response targets for evaluating the internal and external biofidelity of ATDS.

PubMed

Kang, Yun-Seok; Bolte, John H; Moorhouse, Kevin; Donnelly, Bruce; Herriott, Rodney; Mallory, Ann

2012-10-01

The objectives of this study were to obtain biomechanical responses of post mortem human subjects (PMHS) by subjecting them to two moderate-speed rear impact sled test conditions (8.5g, 17 km/h; 10.5g, 24 km/h) while positioned in an experimental seat system, and to create biomechanical targets for internal and external biofidelity evaluation of rear impact ATDs. The experimental seat was designed to measure external loads on the head restraint (4 load cells), seat back (6 load cells), and seat pan (4 load cells) such that subject dynamic interaction with the seat could be evaluated. This seat system was capable of simulating the dynamic characteristics of modern vehicle seat backs by considering the moment-rotation properties of a typical passenger vehicle, thus providing a more realistic test environment than using a rigid seat with a non-rotating seat back as done in previous studies. Instrumentation used to measure biomechanical responses of the PMHS included both accelerometers and angular rate sensors (ARS). A total of fourteen sled tests using eight PMHS (males 175.8 ± 6.2 cm of stature and 78.4 ± 7.2 kg of weight) provided data sets of seven PMHS for both test conditions. The biomechanical responses are described at both speeds, and cervical spine injuries are documented. Biomechanical targets are also created for internal and external biofidelity evaluation of rear impact anthropomorphic test devices (ATDs).

The mediating role of appearance comparisons on the relationship between negative appearance commentary and binge eating symptoms.

PubMed

Herbozo, Sylvia; Stevens, Serena D; Thurston, Idia B

2017-08-01

While the frequency of weight-based teasing during childhood/adolescence has been linked to eating disturbance, limited research has examined the impact of negative appearance commentary experienced in young adulthood. Appearance comparisons have been shown to mediate the relationship between weight-based teasing frequency in childhood/adolescence and eating disturbance; however, less is known about the impact of other forms of negative appearance commentary and binge eating symptoms. The current study examined appearance comparisons to others as a mediator of the relationship between the impact of negative appearance commentary from interpersonal sources and binge eating symptoms in college women. Three hundred and seventeen young adult women from universities in the southwest and midsouth U.S. completed measures of appearance-related commentary, physical appearance comparisons, and binge eating symptoms. Controlling for body mass index, the mediation effect of appearance comparisons was tested using the PROCESS macro for SPSS. Appearance comparisons was a significant mediator of the relationship between the impact of negative appearance comments and binge eating symptoms, F(3,312)=40.256, p<0.001, R 2 =0.279. There was no direct effect of the impact of negative appearance comments on binge eating symptoms. Study findings indicate that appearance comparisons play a role in the extent to which the impact of negative appearance commentary influences binge eating symptoms. Results also suggest the need to address the impact of negative appearance commentary and appearance comparisons simultaneously in interventions for eating disorder psychopathology among college women. Copyright © 2017 Elsevier Ltd. All rights reserved.

An exploratory study of the relationship between socioeconomic status and motor vehicle safety features.

PubMed

Girasek, Deborah C; Taylor, Brett

2010-04-01

The purpose of this study was to assess the association between motor vehicle owners' socioeconomic status (SES) and the safety of their motor vehicles. Truncated vehicle identification numbers (VINs) were obtained from the Maryland Motor Vehicle Administration office. ZIP code-level income and educational data were assigned to each VIN. Software was used to identify safety-related vehicle characteristics including crash test rating, availability of electronic stability control and side impact air bags, age, and weight. Correlations and analyses of variance were performed to assess whether a ZIP code's median household income and educational level were associated with its proportion of registered vehicles with safety features. For 13 of the 16 correlations performed, SES was significantly associated with the availability of vehicle safety features in a direction that favored upper-income individuals. Vehicle weight was not associated with income or education. When ZIP codes were divided into median household income quintiles, their mean proportions of safety features also differed significantly, in the same direction, for availability of electronic stability control, side impact air bags, vehicle age, and crash test ratings. Safer motor vehicles appear to be distributed along socioeconomic lines, with lower income groups experiencing more risk. This previously unidentified mechanism of disparity merits further study and the attention of policy makers.

Open hole and postimpact compressive fatigue of stitched and unstitched carbon-epoxy composites

NASA Technical Reports Server (NTRS)

Portanova, Marc A.; Poe, Clarence C.; Whitcomb, John D.

1992-01-01

The performance is studied of a stitched uniweave fabric composite and that of a toughened tape composite. The effects of stitching on compression fatigue life are addressed. Post impact compression fatigue and open hole fatigue tests were run on an AS4/3501-6 uniweave with stitching and a toughened IM7/8551-7 tape without stitching. Stitching was found to increase the thickness and consequently the weight of the composite material. The two materials were compared on an equal carbon content basis as well as on an equal weight basis. The excess thickness in the stitched uniweave composite was responsible for the lower fatigue life, on an equal carbon basis, compared to the toughened resin tape composite. Comparison of fatigue lives on an equal carbon content basis indicated that puncture or crimp type damage from stitching has very little effect on compression failure. Post impact fatigue test showed that although the damage area in the stitched uniweave composite was twice that of the toughened tape composite, the fatigue lives of the stitched composite were significantly longer than those of the toughened composite. Thus, it appears that the increase in thickness from stitching is much more of a penalty than crimped fibers or puncture type damage from stitching.

Serum markers of bone turnover are increased by modest weight loss with or without weight-bearing exercise in overweight premenopausal women.

PubMed

Rector, R Scott; Loethen, Joanne; Ruebel, Meghan; Thomas, Tom R; Hinton, Pamela S

2009-10-01

Weight loss improves metabolic fitness and reduces morbidity and mortality; however, weight reduction also reduces bone mineral density (BMD) and increases bone turnover. Weight-bearing aerobic exercise may preserve bone mass and maintain normal bone turnover during weight reduction. We investigated the impact of weight-bearing and nonweight-bearing exercise on serum markers of bone formation and breakdown during short-term, modest weight loss in overweight premenopausal women. Subjects (n = 36) were assigned to 1 of 3 weight-loss interventions designed to produce a 5% reduction in body weight over 6 weeks: (i) energy restriction only (n = 11; DIET); (ii) energy restriction plus nonweight-bearing exercise (n = 12, CYCLE); or (iii) energy restriction plus weight-bearing exercise (n = 13, RUN). Bone turnover markers were measured in serum collected at baseline and after weight loss. All groups achieved a ~5% reduction in body weight (DIET = 5.2%; CYCLE = 5.0%; RUN = 4.7%). Osteocalcin (OC) and C-terminal telopeptide of type I collagen (CTX) increased with weight loss in all 3 groups (p < 0.05), whereas bone alkaline phosphatase was unaltered by the weight-loss interventions. At baseline, OC and CTX were positively correlated (r = 0.36, p = 0.03), but the strength of this association was diminished (r = 0.30, p = 0.06) after weight loss. Modest weight loss, regardless of method, resulted in a significant increase in both OC and CTX. Low-impact, weight-bearing exercise had no effect on serum markers of bone formation or resorption in premenopausal women during weight loss. Future studies that examine the effects of high-impact, weight-bearing activity on bone turnover and BMD during weight loss are warranted.

Flexible Foam Protection Materials for Portable Life Support System Packaging Study

NASA Technical Reports Server (NTRS)

Tang,Henry H.; Dillon, Paul A.; Thomas, Gretchen A.

2009-01-01

This paper discusses the phase I effort in evaluating and selecting a light weight impact protection material for the Constellation Space Suit Element (CSSE) Portable Life Support System (PLSS) conceptual packaging study. A light weight material capable of holding and protecting the components inside the PLSS is required to demonstrate the viability of the flexible PLSS packaging concept. The material needs to distribute, dissipate, and absorb the impact energy of the PLSS falling on the lunar surface. It must also be robust to consistently perform over several Extravehicular Activity (EVA) missions in the extreme lunar thermal vacuum environment. This paper documents the performance requirements for selecting a foam protection material, and the methodologies for evaluating some commercial off-the-shelf (COTS) foam material candidates. It also presents the mechanical properties and impact drop tests results of the foam material candidates. The results of this study suggest that a foam based flexible protection system is a viable solution for PLSS packaging. However, additional works are needed to optimize COTS foam or to develop a composite foam system that will meet all the performance requirements for the CSSE PLSS flexible packaging.

Subchondral impaction fractures of the non-weight-bearing portion of the lateral femoral condyle.

PubMed

Depasquale, Ruben; Fotiadou, Anastasia; Kumar, Dalavaye Suresh; Lalam, Radhesh; Tins, Bernhard; Tyrrell, Prudencia N M; Singh, Jaspreet; Cassar-Pullicino, Victor N

2013-02-01

To document the first report of intra-articular, non-weight-bearing, impaction fractures of the lateral femoral condyle. Institutional Review Board and Regional Ethics Committee approval for this study was obtained and patient informed consent deemed unnecessary. We prospectively documented all potential cases of non-weight-bearing posterior subchondral impaction fractures of the femoral condyles diagnosed on magnetic resonance imaging (MRI) of the knee performed at our institution between January 2006 and December 2011. The cases were reviewed and discussed by three experienced musculoskeletal radiologists and only cases satisfying pre-defined MRI criteria were included. Sixteen cases of intra-articular impaction fractures in a posterior, non-weight-bearing area of the lateral femoral condyle were diagnosed in patients with a mean age of 40. Eight were associated with recreational sports activities and 4 with repeated kneeling. There were no fractures documented in the non-weight-bearing aspect of the medial femoral condyles. Proposed underlying mechanisms for development of this type of fracture are presented. Awareness, along with a high level of suspicion, that non-specific knee pain, especially in patients involved in athletic activities, could be due to intra-articular impaction fractures of the non-weight-bearing posterior aspect of the lateral femoral condyle is essential and MRI is the mainstay of diagnosis.

A worksite diabetes prevention program: two-year impact on employee health.

PubMed

Aldana, Steven; Barlow, Marilyn; Smith, Rebecca; Yanowitz, Frank; Adams, Ted; Loveday, LaDonne; Merrill, Ray M

2006-09-01

The purpose of this study was to determine the 2-year impact of a worksite-based diabetes prevention program. Thirty-seven pre-diabetic and previously undiagnosed diabetic employees participating in a 12-month worksite diabetes prevention program were included. Weight, body mass index, waist circumference, oral glucose tolerance testing, fasting insulin, blood lipids, and aerobic fitness had improved significantly after 6 months. Much of this improvement continued through 12 months. One year following the intervention, oral glucose tolerance and aerobic fitness had improved significantly. Of the 22 employees remaining in the study through 24 months, more than half had normal results on glucose tolerance testing. Worksite diabetes prevention programs may reduce blood glucose below pre-diabetic and diabetic levels. Improvements in diabetes risk factors persisted for at least 2 years in most of these employees.

How do C6/C7 tetraplegic patients grasp balls of different sizes and weights? Impact of surgical musculo-tendinous transfers.

PubMed

Laffont, I; Hoffmann, G; Dizien, O; Revol, M; Roby-Brami, A

2007-07-01

Prospective control cohort study. To develop a new test to analyse qualitatively grasping strategies in C6/C7 tetraplegic patients, and to quantify the effect of musculo-tendinous transfers. France. Twelve C6/C7 tetraplegic adults (17 arms; 31.3+/-7.9 years) and 17 healthy subjects (30.9+/-9.4 years) completed the study. We assessed participants' ability to grasp, move and release standardized balls of variable sizes and weights. Failures, movement duration (MD), grip patterns, forearm orientation during transport. In patients as well as in controls, the number of digits involved in prehension increased proportionally to the size and weight of the ball. C6 non-operated tetraplegic patients failed 38.2% of the tasks. They frequently used supine transport (51.4% of successful tasks). MD was longer, with a large distribution of values. The presence of active elbow extension poorly influenced the amount of failure nor grip configuration, but significantly reduced MD and supine transport (34%). Patients who were evaluated after hand surgery showed a trend towards improved MD and more frequent completion (failure 30%), especially for middle-sized and middle-weighted balls. Grip patterns were deeply modified, and all transports were made in pronation. The 'Tetra Ball Test' evidences the characteristics of grasping in tetraplegic patients and those influenced by surgery. It may be useful in understanding effects of surgical procedures. This preliminary study must be completed to evaluate the quantitative responsiveness and reproducibility of this test and to develop instrumented electronic balls to optimise it.

Functional Imagery Training to reduce snacking: Testing a novel motivational intervention based on Elaborated Intrusion theory.

PubMed

Andrade, Jackie; Khalil, Marina; Dickson, Jennifer; May, Jon; Kavanagh, David J

2016-05-01

Functional Imagery Training (FIT) is a new theory-based, manualized intervention that trains positive goal imagery. Multisensory episodic imagery of proximal personal goals is elicited and practised, to sustain motivation and compete with less functional cravings. This study tested the impact of a single session of FIT plus a booster phone call on snacking. In a stepped-wedge design, 45 participants who wanted to lose weight or reduce snacking were randomly assigned to receive a session of FIT immediately or after a 2-week delay. High-sugar and high-fat snacks were recorded using timeline follow back for the previous 3 days, at baseline, 2 and 4 weeks. At 2 weeks, snacking was lower in the immediate group than in the delayed group, and the reduction after FIT was replicated in the delayed group between 2 and 4 weeks. Frequencies of motivational thoughts about snack reduction rose following FIT for both groups, and this change correlated with reductions in snacking and weight loss. By showing that FIT can support change in eating behaviours, these findings show its potential as a motivational intervention for weight management. Copyright © 2016 Elsevier Ltd. All rights reserved.

Impact of Hypocaloric Hyperproteic Diet on Gut Microbiota in Overweight or Obese Patients with Nonalcoholic Fatty Liver Disease: A Pilot Study.

PubMed

Pataky, Zoltan; Genton, Laurence; Spahr, Laurent; Lazarevic, Vladimir; Terraz, Sylvain; Gaïa, Nadia; Rubbia-Brandt, Laura; Golay, Alain; Schrenzel, Jacques; Pichard, Claude

2016-09-01

NAFLD is likely to become the most common cause of chronic liver disease. The first-line treatment includes weight loss. To analyze the impact of a hypocaloric hyperproteic diet (HHD) on gut microbiota in NAFLD patients. Fifteen overweight/obese patients with NAFLD were included. At baseline and after a 3-week HHD (Eurodiets(®), ~1000 kcal/day, ~125 g protein/day), we measured gut microbiota composition and function by shotgun metagenomics; body weight; body composition by bioelectrical impedance analysis; liver and visceral fat by magnetic resonance imaging; plasma C-reactive protein (CRP); and liver tests. Results between both time points, expressed as median (first and third quartile), were compared by Wilcoxon signed-rank tests. At baseline, age was 50 (47-55) years and body mass index 34.6 (32.4, 36.7) kg/m(2). HDD decreased body weight by 3.6 % (p < 0.001), percent liver fat by 65 % (p < 0.001), and CRP by 19 % (p = 0.014). HDD was associated with a decrease in Lachnospira (p = 0.019), an increase in Blautia (p = 0.026), Butyricicoccus (p = 0.024), and changes in several operational taxonomic units (OTUs) of Bacteroidales and Clostridiales. The reduced liver fat was negatively correlated with bacteria belonging to the Firmicutes and Bacteroidetes phyla (a Ruminococcaceae OTU, r = -0.83; Bacteroides, r = -0.73). The associated metabolic changes concerned mostly enzymes involved in amino acid and carbohydrate metabolism. In this pilot study, HHD changes gut microbiota composition and function in overweight/obese NAFLD patients, in parallel with decreased body weight, liver fat, and systemic inflammation. Future studies should aim to confirm these bacterial changes and understand their mode of action. Under clinicaltrials.gov: NCT01477307.

A qualitative analysis of the role of emotions in different patterns of long-term weight loss.

PubMed

Ingels, John Spencer; Zizzi, Sam

2018-08-01

To explore participant perspectives of the impact emotions have on weight loss. A qualitative design gathered data through semi-structured interviews with participants in a weight management programme. The interview addresses the following research questions: (1) how do individuals working to lose weight perceive the impact emotions have on their long-term success, and (2) what strategies do more or less successful participants use to regulate their emotions? Researchers conducted and transcribed the interviews then completed content analysis to create and organise themes. Two broad themes emerged through the interviews with 21 participants: emotional impact and emotional regulation. Further subthemes captured emotions blocking action toward goals, strategies for regulating emotions (e.g. exercise, food) and the need for new strategies to regulate emotions. Themes were also split in to three groups based on weight outcomes: regainer, moderate success (3-6% loss) and large success (>7% loss). More successful participants, compared to regainers, shared being aware of the impact of their emotions and made efforts to develop healthy regulation strategies. Emotional awareness and regulation play an important role in participant's weight management experience. Taking time to build emotional awareness and strategies to manage emotions is important to participants in weight management.

40 CFR 86.129-80 - Road load power, test weight, and inertia weight class determination.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 19 2014-07-01 2014-07-01 false Road load power, test weight, and inertia weight class determination. 86.129-80 Section 86.129-80 Protection of Environment ENVIRONMENTAL... power, test weight, and inertia weight class determination. (a) [Reserved] (b) Power absorption unit...

Cross-regional analysis of multiple factors associated with childhood obesity in India: a national or local challenge?

PubMed

Gregori, Dario; Gulati, Achal; Paramesh, Elizabeth Cherian; Arockiacath, Powlin; Comoretto, Rosanna; Paramesh, Haralappa; Hochdorn, Alexander; Baldi, Ileana

2014-09-01

To investigate obesogenic co-causing factors, promoting rise of weight in children, associated to local differences in India. Overall 1,680 children, aged 3-11 and balanced by gender, were recruited in school contexts distributed in seven major Indian cities. All children were weighted and measured in order to calculate their BMI. A validated cultural specific questionnaire was administered to children's parents for assessing socio-demographic data, eating habits, physical activity, etc. Furthermore children's brand awareness scores were computed in order to analyze their affiliation towards food-based advertisement. Descriptive statistics of frequencies, duration and intensity of the various factors were performed. Chi-square tests or Wilcoxon signed rank test were used for evaluating significance of differences in factors distribution across Indian cities. Four factors, promoting rise of children's weight, were individuated as associated to urban differences, namely meal times consumed in the family, parents' BMI, brand awareness and physical activity. These aspects exercised a significant impact on children's body size in Kolkata and Chennai. Hyderabad and Mumbai, instead, were the cities where religion played some role in influencing children's weight gain. Such findings underline the need to frame obesity as a situated phenomenon rather than a national problem. Health policies, implemented in treating and preventing obesity, should be therefore specifically focused on locally situated peculiarities.

Assessment of Oral Conditions and Quality of Life in Morbid Obese and Normal Weight Individuals: A Cross-Sectional Study.

PubMed

Yamashita, Joselene Martinelli; Moura-Grec, Patrícia Garcia de; Freitas, Adriana Rodrigues de; Sales-Peres, Arsênio; Groppo, Francisco Carlos; Ceneviva, Reginaldo; Sales-Peres, Sílvia Helena de Carvalho

2015-01-01

The aim of this study was to identify the impact of oral disease on the quality of life of morbid obese and normal weight individuals. Cohort was composed of 100 morbid-obese and 50 normal-weight subjects. Dental caries, community periodontal index, gingival bleeding on probing (BOP), calculus, probing pocket depth, clinical attachment level, dental wear, stimulated salivary flow, and salivary pH were used to evaluate oral diseases. Socioeconomic and the oral impacts on daily performances (OIDP) questionnaires showed the quality of life in both groups. Unpaired Student, Fisher's Exact, Chi-Square, Mann-Whitney, and Multiple Regression tests were used (p<0.05). Obese showed lower socio-economic level than control group, but no differences were found considering OIDP. No significant differences were observed between groups considering the number of absent teeth, bruxism, difficult mastication, calculus, initial caries lesion, and caries. However, saliva flow was low, and the salivary pH was changed in the obese group. Enamel wear was lower and dentine wear was higher in obese. More BOP, insertion loss, and periodontal pocket, especially the deeper ones, were found in obese subjects. The regression model showed gender, smoking, salivary pH, socio-economic level, periodontal pocket, and periodontal insertion loss significantly associated to obesity. However, both OIDP and BOP did not show significant contribution to the model. The quality of life of morbid obese was more negatively influenced by oral disease and socio-economic factors than in normal weight subjects.

The impact of gestational diabetes and hypothyroidism on the third-trimester ultrasound parameters and in adverse perinatal outcomes: a retrospective cohort study.

PubMed

Peixoto, Alberto Borges; Caldas, Taciana Mara Rodrigues da Cunha; Santos, Raisa Oliveira; Lopes, Karina Souza; Martins, Wellington P; Araujo Júnior, Edward

2016-11-01

To assess the impact of gestational diabetes and hypothyroidism on the third-trimester ultrasound parameters and in adverse perinatal outcomes. We performed a retrospective cohort study with 817 singleton pregnant women between 26w0d and 37w6d of gestation which were divided in four groups: 56 gestational diabetes mellitus (GDM), 63 hypothyroidism, 14 GDM + hypothyroidism, and 684 controls. The following ultrasound parameters were assessed: mean uterine artery pulsatility index (PI), umbilical artery PI, middle cerebral artery PI, single deepest pocket (SDP) and cerebroplacental ratio (CPR). Adverse perinatal outcomes were the following: low birth weight, macrosomia, and Agar score at 1st min <7. These four groups were compared using the Kruskall-Wallis and χ(2) tests. Pregnant women from GDM showed higher weight (p < 0.001), BMI (p < 0.001), SDP (p < 0.001) and newborns with higher birth weight (p = 0.008) and macrosomia (p = 0.02) than other groups. Comparing with control, hypothyroidism showed higher SDP (p < 0.05). Pregnant women with GDM showed higher risk of macrosomic newborns than other three groups. Both pregnant women with GDM and hypothyroidism showed higher SDP than normal pregnancies.

The Influence of Polyethylene Glycol Solution on the Dissolution Rate of Sustained Release Morphine.

PubMed

Hodgman, Michael; Holland, Michael G; Englich, Ulrich; Wojcik, Susan M; Grant, William D; Leitner, Erich

2016-12-01

Whole bowel irrigation (WBI) is a management option for overdose of medications poorly adsorbed to activated charcoal, with modified release properties, or for body packers. Polyethylene glycol (PEG) is a mixture of ethylene oxide polymers of varying molecular weight. PEG with an average molecular weight of 3350 g/mol is used for WBI. PEG electrolyte lavage solution has been shown in vitro to hasten the dissolution of acetaminophen. The impact of PEG on the pharmacokinetics of extended release pharmaceuticals is unknown. Lower average molecular weight PEG mixtures are used as solvents and excipients. We sought to investigate the impact of PEG on the release of morphine from several extended release morphine formulations. An in vitro gastric model was developed. To test the validity of our model, we first investigated the previously described interaction of ethanol and Avinza®. Once demonstrated, we then investigated the effect of PEG with several extended release morphine formulations. In the validation portion of our study, we confirmed an ethanol Avinza® interaction. Subsequently, we did not observe accelerated release of morphine from Avinza® or generic extended release morphine in the presence of PEG. The use of PEG for gastric decontamination following ingestion of these extended release morphine formulations is unlikely to accelerate morphine release and aggravate intoxication.

Health behaviors as mediators for the effect of partner abuse on infant birth weight.

PubMed

Kearney, Margaret H; Munro, Barbara Hazard; Kelly, Ursula; Hawkins, Joellen W

2004-01-01

Intimate partner abuse of pregnant women has been linked to the delivery of low-birth-weight infants. Also, abused pregnant women have reported a greater prevalence of substance abuse, poor nutrition, and demographic risk factors for poor birth outcomes. These factors may play a role in the reported relation between intimate partner violence and birth weight. To explore the role of substance abuse (smoking, alcohol, and drug use) and weight gain of less than 15 pounds during pregnancy as potential mediators of the relation between recent partner abuse and infant birth weight, and to investigate the role of demographic risk factors as potential moderators for the impact of abuse on birth weight. Data were extracted on abuse screening results, demographics, birth outcomes, and a range of medical and obstetric risks and complications from the medical records of 1969 women who had been screened by clinicians for domestic abuse during pregnancy. Hypotheses were tested using multiple regression analysis. Recent physical or psychological abuse had a small but significant effect on birth weight in this sample. Smoking and low weight gain were weak but significant mediators of the relation between recent abuse and infant birth weight. Single marital status was the strongest demographic predictor of decreased birth weight. No moderator effects were found. Although prospective studies are warranted, nursing care to reduce smoking and promote adequate weight gain in all women along with support for women's efforts to seek safety from abuse may help to improve birth outcomes and promote maternal well-being.

Weight gain in mice on a high caloric diet and chronically treated with omeprazole depends on sex and genetic background.

PubMed

Saqui-Salces, Milena; Tsao, Amy C; Gillilland, Merritt G; Merchant, Juanita L

2017-01-01

The impact of omeprazole (OM), a widely used over-the-counter proton pump inhibitor, on weight gain has not been extensively explored. We examined what factors, e.g., diet composition, microbiota, genetic strain, and sex, might affect weight gain in mice fed a high caloric diet while on OM. Inbred C57BL/6J strain, a 50:50 hybrid (B6SJLF1/J) strain, and mice on a highly mixed genetic background were fed four diets: standard chow (STD, 6% fat), STD with 200 ppm OM (STD + O), a high-energy chow (HiE, 11% fat), and HiE chow with OM (HiE + O) for 17 wk. Metabolic analysis, body composition, and fecal microbiota composition were analyzed in C57BL/6J mice. Oral glucose tolerance tests were performed using mice on the mixed background. After 8 wk, female and male C57BL/6J mice on the HiE diets ate less, whereas males on the HiE diets compared with the STD diets gained weight. All diet treatments reduced energy expenditure in females but in males only those on the HiE + O diet. Gut microbiota composition differed in the C57BL/6J females but not the males. Hybrid B6SJLF1/J mice showed similar weight gain on all test diets. In contrast, mixed strain male mice fed a HiE + O diet gained ∼40% more weight than females on the same diet. In addition to increased weight gain, mixed genetic mice on the HiE + O diet cleared glucose normally but secreted more insulin. We concluded that sex and genetic background define weight gain and metabolic responses of mice on high caloric diets and OM. Copyright © 2017 the American Physiological Society.

Advanced thermoplastic resins, phase 1

NASA Technical Reports Server (NTRS)

Hendricks, C. L.; Hill, S. G.; Falcone, A.; Gerken, N. T.

1991-01-01

Eight thermoplastic polyimide resin systems were evaluated as composite matrix materials. Two resins were selected for more extensive mechanical testing and both were versions of LaRC-TPI (Langley Research Center - Thermoplastic Polyimide). One resin was made with LaRC-TPI and contained 2 weight percent of a di(amic acid) dopant as a melt flow aid. The second system was a 1:1 slurry of semicrystalline LaRC-TPI powder in a polyimidesulfone resin diglyme solution. The LaRC-TPI powder melts during processing and increases the melt flow of the resin. Testing included dynamic mechanical analysis, tension and compression testing, and compression-after-impact testing. The test results demonstrated that the LaRC-TPI resins have very good properties compared to other thermoplastics, and that they are promising matrix materials for advanced composite structures.

Perceived weight discrimination and chronic biochemical stress: A population-based study using cortisol in scalp hair.

PubMed

Jackson, Sarah E; Kirschbaum, Clemens; Steptoe, Andrew

2016-12-01

There is increasing evidence for weight-based discrimination against persons with obesity. This study aimed to examine the physiological impact of perceived weight discrimination on cortisol in hair, an indicator of chronic stress exposure. Data were from 563 nonsmoking individuals with obesity (body mass index, BMI ≥30 kg/m 2 ) participating in the English Longitudinal Study of Ageing. Experiences of discrimination were reported via questionnaire, and hair cortisol concentrations were determined from the scalp-nearest 2-cm hair segment. Height and weight were objectively measured. ANCOVAs tested associations between perceived weight discrimination and hair cortisol concentration overall and by degree of obesity. All analyses were adjusted for age, sex, ethnicity, socioeconomic status, and BMI. Mean hair cortisol concentrations were 33% higher in those who had experienced weight discrimination than those who had not (mean log pg/mg 1.241 vs. 0.933, F = 12.01, P = 0.001). The association between weight discrimination and hair cortisol was particularly pronounced in individuals with severe (class II/III) obesity (1.402 vs. 0.972, F = 11.58, P = 0.001). Weight discrimination is associated with the experience of stress at a biological level. Chronic exposure to elevated levels of cortisol may play a role in generating a vicious circle of weight gain and discrimination and contribute to obesity-associated health conditions. © 2016 The Authors. Obesity published by Wiley Periodicals, Inc. on behalf of The Obesity Society (TOS).

The benefits and harms of providing parents with weight feedback as part of the national child measurement programme: a prospective cohort study

PubMed Central

2014-01-01

Background Small-scale evaluations suggest that the provision of feedback to parents about their child’s weight status may improve recognition of overweight, but the effects on lifestyle behaviour are unclear and there are concerns that informing parents that their child is overweight may have harmful effects. The aims of this study were to describe the benefits and harms of providing weight feedback to parents as part of a national school-based weight-screening programme in England. Methods We conducted a pre-post survey of 1,844 parents of children aged 4–5 and 10–11 years who received weight feedback as part of the 2010–2011 National Child Measurement Programme. Questionnaires assessed general knowledge about the health risks associated with child overweight, parental recognition of overweight and the associated health risks in their child, child lifestyle behaviour, child self-esteem and weight-related teasing, parental experience of the feedback, and parental help-seeking behaviour. Differences in the pre-post proportions of parents reporting each outcome were assessed using a McNemar’s test. Results General knowledge about child overweight as a health issue was high at baseline and increased further after weight feedback. After feedback, the proportion of parents that correctly recognised their child was overweight increased from 21.9% to 37.7%, and more than a third of parents of overweight children sought further information regarding their child’s weight. However, parent-reported changes in lifestyle behaviours among children were minimal, and limited to increases in physical activity in the obese children only. There was some suggestion that weight feedback had a greater impact upon changing parental recognition of the health risks associated with child overweight in non-white ethnic groups. Conclusions In this population-based sample of parents of children participating in the National Child Measurement Programme, provision of weight feedback increased recognition of child overweight and encouraged some parents to seek help, without causing obvious unfavourable effects. The impact of weight feedback on behaviour change was limited; suggesting that further work is needed to identify ways to more effectively communicate health information to parents and to identify what information and support may encourage parents in making and maintaining lifestyle changes for their child. PMID:24888972

Assessing bias against overweight individuals among nursing and psychology students: an implicit association test.

PubMed

Waller, Tabitha; Lampman, Claudia; Lupfer-Johnson, Gwen

2012-12-01

To determine the implicit or unconscious attitudes of Nursing and Psychology majors towards overweight individuals in medical and non-medical contexts. Obesity is a leading health concern today, which impacts both physical and psychological health. Overweight individuals confront social biases in many aspects of their lives including health care. Examining the views of Nursing and Psychology students may reveal implicit attitudes towards overweight individuals that may lead to prejudiced behaviours. A mixed design experiment with one between-subjects variable (student major: Nursing or Psychology) and one within-subjects variable (condition: congruent or incongruent) was used to assess implicit attitudes in two convenience samples of Nursing and Psychology students. A computerised implicit association test was used to determine implicit attitudes towards overweight individuals in medical and non-medical contexts. A total of 90 students from Nursing (n= 45) and Psychology (n = 45) were recruited to complete an implicit association test. Reaction times in milliseconds between the congruent trials (stereotype consistent) and incongruent trials (stereotype inconsistent) were compared with determine adherence to social stereotypes or weight bias. A statistically significant implicit bias towards overweight individuals was detected in both subject groups and in both target settings (medical vs. non-medical). Stronger weight bias was found when the stimulus targets were female than male. Findings from this study expand understanding of the implicit attitudes and social biases of Nursing and Psychology students. The views held by these future healthcare professionals may negatively impact patient care. Providing education and support to overweight individuals is central to Nursing practice in a society struggling to manage obesity. Negative stereotypes or beliefs about these individuals may result in poor patient care. Therefore, nurses and other healthcare professionals must be aware of personal biases and work to develop methods to address weight-related issues in a therapeutic manner. © 2012 Blackwell Publishing Ltd.

Fluidics and heat generation of Alcon Infiniti and Legacy, Bausch & Lomb Millennium, and advanced medical optics sovereign phacoemulsification systems.

PubMed

Floyd, Michael S; Valentine, Jeremy R; Olson, Randall J

2006-09-01

To study heat generation, vacuum, and flow characteristics of the Alcon Infiniti and Bausch & Lomb Millennium with results compared with the Alcon Legacy and advanced medical optics (AMO) Sovereign machines previously studied. Experimental study. Heat generation with continuous ultrasound was determined with and without a 200-g weight. Flow and vacuum were determined from 12 to 40-ml/min in 2-ml/min steps. The impact of a STAAR Cruise Control was also tested. Millennium created the most heat/20% of power (5.67 +/- 0.51 degrees C unweighted and 6.80 +/- 0.80 degrees C weighted), followed by Sovereign (4.59 +/- 0.70 degrees C unweighted and 5.65 +/- 0.72 degrees C weighted), Infiniti (2.79 +/- 0.62 degrees C unweighted and 3.96 +/- 0.31 degrees C weighted), and Legacy (1.99 +/- 0.49 degrees C unweighted and 4.27 +/- 0.76 degrees C weighted; P < .0001 for all comparisons between machines except Infiniti vs Legacy, both weighted). Flow studies revealed that Millennium Peristaltic was 17% less than indicated (P < .0001 to all other machines), and all other machines were within 3.5% of indicated. Cruise Control decreased flow by 4.1% (P < .0001 for same machine without it). Millennium Venturi had the greatest vacuum (81% more than the least Sovereign; P < .0001), and Cruise Control increased vacuum in a peristaltic machine 35% more than the Venturi system (P < .0001). Percent power is not consistent in regard to heat generation, however, flow was accurate for all machines except Millennium Peristaltic. Restriction with Cruise Control elevates unoccluded vacuum to levels greater than the Venturi system tested.

Banding the Sleeve Improves Weight Loss in Midterm Follow-up.

PubMed

Fink, Jodok M; Hoffmann, Natalie; Kuesters, Simon; Seifert, Gabriel; Laessle, Claudia; Glatz, Torben; Hopt, Ulrich T; Konrad Karcz, W; Marjanovic, Goran

2017-04-01

Laparoscopic sleeve gastrectomy (LSG) can achieve excellent weight loss, yet sleeve dilatation with concomitant weight regain proves to be a relevant issue. Hence, additional restriction might improve results after LSG. In a retrospective matched-pair analysis, 42 patients who underwent banded LSG (BLSG) using a MiniMizer® ring between January 2012 and October 2014 were analysed regarding weight loss, complications and comorbidity. Median follow-up was 3 years. Forty-two patients who had undergone conventional LSG were selected as matched pairs. Mean preoperative BMI was 54.93 ± 7.42 kg/m 2 for BLSG and 53.46 ± 6.69 kg/m 2 for LSG (Mann-Whitney P = 0.540). Total weight loss (%TWL) was significantly greater in the BLSG group 3 years after surgery (BLSG 38.22% ± 7.26; n = 26 vs. LSG 32.69 ± 9.47; n = 26; P = 0.0154). Ring placement had no relevant impact on new-onset reflux (Fisher's exact test P = 1.0) but a tendency towards reflux improvement when reflux pre-existed (odds ratio 1.96). The major side effect of ring implantation was regurgitation with over 44% of patients presenting with regurgitation >1 per week (Fisher's exact test P = 0.0019, odds ratio 18.07). BLSG is a safe procedure showing similar comorbidity to conventional LSG. However, BLSG leads to a higher rate of postoperative regurgitation. Weight loss is significantly improved 3 years after surgery. Hence, additional ring implantation might be an option for increased restriction in LSG surgery.

Sleep-obesity relation: underlying mechanisms and consequences for treatment.

PubMed

St-Onge, M-P

2017-02-01

Short sleep duration has been associated with obesity in numerous epidemiological studies. However, such association studies cannot establish evidence of causality. Clinical intervention studies, on the other hand, can provide information on a causal effect of sleep duration on markers of weight gain: energy intake and energy expenditure. Herein is an overview of the science related to the impact of sleep restriction, in the context of clinical intervention studies, on energy intake, energy expenditure and body weight. Additionally, studies that evaluate the impact of sleep restriction on weight loss and the impact of sleep extension on appetite are discussed. Information to date suggests that weight management is hindered when attempted in the context of sleep restriction, and the public should be made aware of the negative consequences of sleep restriction for weight regulation. © 2017 World Obesity Federation.

Lightning protection of the Fokker 100 CFRP rudder

NASA Technical Reports Server (NTRS)

Ruiter, A. J. M.

1991-01-01

The construction of the structural parts of the Fokker 100 CFRP rudder is described with respect to the requirements for electrical bonding and lightning protection. Furthermore, the philosophy for the selection of a consumable trailing edge is given. A description of possible alternative designs for trailing edges and their advantages and disadvantages with respect to damage after lightning impact will also be reviewed. An overview of the tests performed on test samples and the rudder construction are presented and discussed. The effectiveness of both the selected structural provisions and trailing edge are described (and proven) by reporting the results of the simulated lightning tests performed. Proof is given that the trailing edge construction and its bonding through the structural parts of the rudder to the main aircraft structure is a solution which results in minor damage to the rudder after lightning impact. Furthermore, it is shown that the selected trailing edge construction is less favored by the structural designers due to the weight penalty.

Analytical trade study of the STS payload environment. [design analysis and cost estimates for noise reduction devices for space shuttle orbiter payloads

NASA Technical Reports Server (NTRS)

Rader, W. P.; Barrett, S.; Raratono, J.; Payne, K. R.

1976-01-01

The current predicted acoustic environment for the shuttle orbiter payload bay will produce random vibration environments for payload components and subsystems which potentially will result in design, weight and cost penalties if means of protecting the payloads are not developed. Results are presented of a study to develop, through design and cost effectiveness trade studies, conceptual noise suppression device designs for space shuttle payloads. The impact of noise suppression on environmental levels and associated test costs, and on test philosophy for the various payload classes is considered with the ultimate goal of reducing payload test costs. Conclusions and recommendations are presented.

Adaptive magnetorheological seat suspension for shock mitigation

NASA Astrophysics Data System (ADS)

Singh, Harinder Jit

This research focuses on theoretical and experimental analysis of an adaptive seat suspension employing magnetorheological energy absorber with the objective of minimizing injury potential to seated occupant of different weights subjected to broader crash intensities. The research was segmented into three tasks: (1) development of magnetorheological energy absorber, (2) biodynamic modeling of a seated occupant, and (3) control schemes for shock mitigation. A linear stroking semi-active magnetorheological energy absorber (MREA) was designed, fabricated and tested for intense impact conditions with piston velocities up to 8 m/s. MREA design was optimized on the basis of Bingham-plastic model (BPM model) in order to maximize the energy absorption capabilities at high impact velocities. Computational fluid dynamics and magnetic FE analysis were conducted to validate MREA performance. Subsequently, low-speed cyclic testing (0-2 Hz subjected to 0-5.5 A) and high-speed drop testing (0-4.5 m/s at 0 A) were conducted for quantitative comparison with the numerical simulations. Later, a nonlinear four degrees-of-freedom biodynamic model representing a seated 50th percentile male occupant was developed on the basis of experiments conducted on Hybrid II 50th percentile male anthropomorphic test device. The response of proposed biodynamic model was compared quantitatively against two different biodynamic models from the literature that are heavily implemented for obtaining biodynamic response under impact conditions. The proposed biodynamic model accurately predicts peak magnitude, overall shape and the duration of the biodynamic transient response, with minimal phase shift. The biodynamic model was further validated against 16 impact tests conducted on horizontal accelerator facility at NAVAIR for two different shock intensities. Compliance effects of human body were also investigated on the performance of adaptive seat suspension by comparing the proposed biodynamic model response with that of a rigid body response. Finally, three different control schemes were analyzed for maximizing shock attenuation using semi-active magnetorheological energy absorber. High-speed drop experiments were conducted by dropping two rigid payloads of 240 and 340 lb mass from heights of 35 and 60 inch to simulate different impact intensities. First control scheme called constant stroking load control offered inflexible stroking load irrespective of varying impact severity or occupant weight. The other two control schemes: terminal trajectory control and optimal control adapted stroking load as per the shock intensity. The control schemes were compared on the basis of their adaptability and ease of implementation. These tools can serve as the basis for future research and development of state-of-the-art crashworthy seat suspension designs that further enhance occupant protection compared to limited performance of existing passive crashworthy concepts.

40 CFR 86.129-00 - Road load power, test weight, and inertia weight class determination.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Road load power, test weight, and inertia weight class determination. 86.129-00 Section 86.129-00 Protection of Environment ENVIRONMENTAL... power, test weight, and inertia weight class determination. (a) * * * 4 For model year 1994 and later...

40 CFR 86.129-00 - Road load power, test weight, and inertia weight class determination.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 18 2011-07-01 2011-07-01 false Road load power, test weight, and inertia weight class determination. 86.129-00 Section 86.129-00 Protection of Environment ENVIRONMENTAL... power, test weight, and inertia weight class determination. (a) * * * 4 For model year 1994 and later...

40 CFR 86.129-00 - Road load power, test weight, and inertia weight class determination.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 19 2012-07-01 2012-07-01 false Road load power, test weight, and inertia weight class determination. 86.129-00 Section 86.129-00 Protection of Environment ENVIRONMENTAL... power, test weight, and inertia weight class determination. (a) * * * 4 For model year 1994 and later...

40 CFR 86.129-00 - Road load power, test weight, and inertia weight class determination.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 19 2014-07-01 2014-07-01 false Road load power, test weight, and inertia weight class determination. 86.129-00 Section 86.129-00 Protection of Environment ENVIRONMENTAL... power, test weight, and inertia weight class determination. (a) * * * 4 For model year 1994 and later...

40 CFR 86.129-00 - Road load power, test weight, and inertia weight class determination.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 19 2013-07-01 2013-07-01 false Road load power, test weight, and inertia weight class determination. 86.129-00 Section 86.129-00 Protection of Environment ENVIRONMENTAL... power, test weight, and inertia weight class determination. (a) * * * 4 For model year 1994 and later...

Metabolic impact of switching antipsychotic therapy to aripiprazole after weight gain: a pilot study.

PubMed

Kim, Sun H; Ivanova, Oxana; Abbasi, Fahim A; Lamendola, Cindy A; Reaven, Gerald M; Glick, Ira D

2007-08-01

Switching antipsychotic regimen to agents with low weight gain potential has been suggested in patients who gain excessive weight on their antipsychotic therapy. In an open-label pilot study, we evaluated the metabolic and psychiatric efficacy of switching to aripiprazole in 15 (9 men, 6 women) outpatients with schizophrenia who had gained at least 10 kg on their previous antipsychotic regimen. Individuals had evaluation of glucose tolerance, insulin resistance (insulin suppression test), lipid concentrations, and psychiatric status before and after switching to aripiprazole for 4 months. A third of the individuals could not psychiatrically tolerate switching to aripiprazole. In the remaining individuals, psychiatric symptoms significantly improved with decline in Clinical Global Impression Scale (by 26%, P = 0.015) and Positive and Negative Syndrome Scale (by 22%, P = 0.023). Switching to aripiprazole did not alter weight or metabolic outcomes (fasting glucose, insulin resistance, and lipid concentrations) in the patients of whom 73% were insulin resistant and 47% had impaired or diabetic glucose tolerance at baseline. In conclusion, switching to aripiprazole alone does not ameliorate the highly prevalent metabolic abnormalities in the schizophrenia population who have gained weight on other second generation antipsychotic medications.

The importance of oxygen control reaffirmed: experience of ROP reduction at a single tertiary care center.

PubMed

Nobile, Stefano; Gnocchini, Francesco; Pantanetti, Marco; Battistini, Paola; Carnielli, Virgilio P

2014-01-01

To report the impact of the adoption of a low oxygen saturation policy on retinopathy of prematurity (ROP) incidence at a single tertiary care center. ROP incidence, procedures for ROP, and neonatal outcome among very low birth weight infants were compared before and after the adoption of a low saturation policy, which took place in 2004. The Mann– Whitney test was performed to look for differences. The incidence of severe ROP significantly decreased from 5.3% of live very low birth weight infants between 1999 and 2004 to 1% of live very low birth weight infants between 2005 and 2012 (P = .003). The use of laser therapy for severe ROP between the same periods significantly decreased from 6.4% of live very low birth weight infants between 1999 and 2004 to 0.6% of live very low birth weight infants between 2005 and 2012 (P = .002). There was also a significant reduction of death or bronchopulmonary dysplasia from 33.8% between 1999 and 2004 to 24.2% between 2005 and 2012 (P = .02). Trained personnel and low and tailored oxygen saturation intervals for very low birth weight infants could play a pivotal role in reducing the incidence of severe ROP without increasing mortality.

Development and Implementation of the National Test Facility (NaTeF) for Fuels and Propulsion

DTIC Science & Technology

2013-10-01

permanent indentation. This equipment is used in the Materials Laboratory to determine hardness in polymers, elastomers, and rubbers , characteristics...impacted by exposure to synthetic fuels was the nitrile rubber , one of the materials selected for this research. Further research found a relationship...Similarly, as the molecular weight decreased, the volume swell increased. Therefore, it is indicated that the greatest swell in nitrile rubber will be

Effects of Dynamic Impact Loading on Microstructure of FCC (TWIP) Steel

DTIC Science & Technology

2014-08-01

experimental development and fundamental studies into weld metal solidification cracking in steels and stainless steels . He has also undertaken...bands (ABS) may appear when the steel is subjected to high strain rate deformation. They concluded the following: 1. For TWIP steel deformed under...mm) was selected as a trial material in this case. The Explosive Bulge Test (EBT) was performed on the TWIP steel using charge weight (PE4 high

Identifying and measuring stakeholder preferences for disease prioritisation: A case study of the pig industry in Australia.

PubMed

Brookes, V J; Hernández-Jover, M; Neslo, R; Cowled, B; Holyoake, P; Ward, M P

2014-01-01

We describe stakeholder preference modelling using a combination of new and recently developed techniques to elicit criterion weights to incorporate into a multi-criteria decision analysis framework to prioritise exotic diseases for the pig industry in Australia. Australian pig producers were requested to rank disease scenarios comprising nine criteria in an online questionnaire. Parallel coordinate plots were used to visualise stakeholder preferences, which aided identification of two diverse groups of stakeholders - one group prioritised diseases with impacts on livestock, and the other group placed more importance on diseases with zoonotic impacts. Probabilistic inversion was used to derive weights for the criteria to reflect the values of each of these groups, modelling their choice using a weighted sum value function. Validation of weights against stakeholders' rankings for scenarios based on real diseases showed that the elicited criterion weights for the group who prioritised diseases with livestock impacts were a good reflection of their values, indicating that the producers were able to consistently infer impacts from the disease information in the scenarios presented to them. The highest weighted criteria for this group were attack rate and length of clinical disease in pigs, and market loss to the pig industry. The values of the stakeholders who prioritised zoonotic diseases were less well reflected by validation, indicating either that the criteria were inadequate to consistently describe zoonotic impacts, the weighted sum model did not describe stakeholder choice, or that preference modelling for zoonotic diseases should be undertaken separately from livestock diseases. Limitations of this study included sampling bias, as the group participating were not necessarily representative of all pig producers in Australia, and response bias within this group. The method used to elicit criterion weights in this study ensured value trade-offs between a range of potential impacts, and that the weights were implicitly related to the scale of measurement of disease criteria. Validation of the results of the criterion weights against real diseases - a step rarely used in MCDA - added scientific rigour to the process. The study demonstrated that these are useful techniques for elicitation of criterion weights for disease prioritisation by stakeholders who are not disease experts. Preference modelling for zoonotic diseases needs further characterisation in this context. Copyright © 2013 Elsevier B.V. All rights reserved.

A Malay version of the Child Oral Impacts on Daily Performances (Child-OIDP) index: assessing validity and reliability.

PubMed

Yusof, Zamros Y M; Jaafar, Nasruddin

2012-06-08

The study aimed to develop and test a Malay version of the Child-OIDP index, evaluate its psychometric properties and report on the prevalence of oral impacts on eight daily performances in a sample of 11-12 year old Malaysian schoolchildren. The Child-OIDP index was translated from English into Malay. The Malay version was tested for reliability and validity on a non-random sample of 132, 11-12 year old schoolchildren from two urban schools in Kuala Lumpur. Psychometric analysis of the Malay Child-OIDP involved face, content, criterion and construct validity tests as well as internal and test-retest reliability. Non-parametric statistical methods were used to assess relationships between Child-OIDP scores and other subjective outcome measures. The standardised Cronbach's alpha was 0.80 and the weighted Kappa was 0.84 (intraclass correlation = 0.79). The index showed significant associations with different subjective measures viz. perceived satisfaction with mouth, perceived needs for dental treatment, perceived oral health status and toothache experience in the previous 3 months (p < 0.05). Two-thirds (66.7%) of the sample had oral impacts affecting one or more performances in the past 3 months. The three most frequently affected performances were cleaning teeth (36.4%), eating foods (34.8%) and maintaining emotional stability (26.5%). In terms of severity of impact, the ability to relax was most severely affected by their oral conditions, followed by ability to socialise and doing schoolwork. Almost three-quarters (74.2%) of schoolchildren with oral impacts had up to three performances affected by their oral conditions. This study indicated that the Malay Child-OIDP index is a valid and reliable instrument to measure the oral impacts of daily performances in 11-12 year old urban schoolchildren in Malaysia.

Explaining the black-white gap in cognitive test scores: Toward a theory of adverse impact.

PubMed

Cottrell, Jonathan M; Newman, Daniel A; Roisman, Glenn I

2015-11-01

In understanding the causes of adverse impact, a key parameter is the Black-White difference in cognitive test scores. To advance theory on why Black-White cognitive ability/knowledge test score gaps exist, and on how these gaps develop over time, the current article proposes an inductive explanatory model derived from past empirical findings. According to this theoretical model, Black-White group mean differences in cognitive test scores arise from the following racially disparate conditions: family income, maternal education, maternal verbal ability/knowledge, learning materials in the home, parenting factors (maternal sensitivity, maternal warmth and acceptance, and safe physical environment), child birth order, and child birth weight. Results from a 5-wave longitudinal growth model estimated on children in the NICHD Study of Early Child Care and Youth Development from ages 4 through 15 years show significant Black-White cognitive test score gaps throughout early development that did not grow significantly over time (i.e., significant intercept differences, but not slope differences). Importantly, the racially disparate conditions listed above can account for the relation between race and cognitive test scores. We propose a parsimonious 3-Step Model that explains how cognitive test score gaps arise, in which race relates to maternal disadvantage, which in turn relates to parenting factors, which in turn relate to cognitive test scores. This model and results offer to fill a need for theory on the etiology of the Black-White ethnic group gap in cognitive test scores, and attempt to address a missing link in the theory of adverse impact. (c) 2015 APA, all rights reserved).

Factors affecting levels of circulating cell-free fetal DNA in maternal plasma and their implications for noninvasive prenatal testing.

PubMed

Kinnings, Sarah L; Geis, Jennifer A; Almasri, Eyad; Wang, Huiquan; Guan, Xiaojun; McCullough, Ron M; Bombard, Allan T; Saldivar, Juan-Sebastian; Oeth, Paul; Deciu, Cosmin

2015-08-01

Sufficient fetal DNA in a maternal plasma sample is required for accurate aneuploidy detection via noninvasive prenatal testing, thus highlighting a need to understand the factors affecting fetal fraction. The MaterniT21™ PLUS test uses massively parallel sequencing to analyze cell-free fetal DNA in maternal plasma and detect chromosomal abnormalities. We assess the impact of a variety of factors, both maternal and fetal, on the fetal fraction across a large number of samples processed by Sequenom Laboratories. The rate of increase in fetal fraction with increasing gestational age varies across the duration of the testing period and is also influenced by fetal aneuploidy status. Maternal weight trends inversely with fetal fraction, and we find no added benefit from analyzing body mass index or blood volume instead of weight. Strong correlations exist between fetal fractions from aliquots taken from the same patient at the same blood draw and also at different blood draws. While a number of factors trend with fetal fraction across the cohort as a whole, they are not the sole determinants of fetal fraction. In this study, the variability for any one patient does not appear large enough to justify postponing testing to a later gestational age. © 2015 John Wiley & Sons, Ltd.

Nutritional status of patients with locally advanced pancreatic cancer: a pilot study.

PubMed

Ferrucci, Leah M; Bell, Diana; Thornton, Jennifer; Black, Glenda; McCorkle, Ruth; Heimburger, Douglas C; Saif, Muhammad Wasif

2011-11-01

Nutritional status may influence quality of life and prognosis among pancreatic cancer patients, yet few studies describe measures of nutritional status during treatment. We evaluated the nutritional status of locally advanced pancreatic cancer (LAPC) patients undergoing chemoradiotherapy who received baseline nutritional assessment and counseling. Fourteen newly diagnosed LAPC patients enrolled in phase I/II trials of capecitabine with concomitant radiotherapy were assessed for baseline clinical nutrition measures (body mass index, albumin, weight loss, total energy, and protein intake). Participants completed the Anorexia/Cachexia Subscale (A/CS) questionnaire at baseline and during the 6 weeks of treatment. We evaluated associations between baseline characteristics and subsequent A/CS scores with linear regression and changes in A/CS were assessed with the paired t test. We observed a statistically significant increase in mean A/CS between baseline [24.9, standard deviation (SD) = 9.7] and end of treatment (29.9, SD = 6.2). Controlling for baseline A/CS score, only weight loss greater than 5% of body weight over 1 month was associated with A/CS scores at 6 weeks (β = 10.558, standard error = 3.307, p value = 0.009) and mean A/CS scores during the last 3 weeks of treatment (β = 12.739, standard error = 2.251, p value = 0.001). After 6 weeks of chemoradiotherapy, LAPC patients reported a statistically significant improvement in appetite and weight concerns. Increases in AC/S scores were associated with higher baseline A/CS scores and weight loss of 5% or more during 1 month. Further research is needed to determine the impact of nutritional support during treatment, as improvements in this domain may impact LAPC patients' overall quality of life.

Dialysate bicarbonate variation in maintenance hemodiafiltration patients: Impact on serum bicarbonate, intradialytic hypotension and interdialytic weight gain.

PubMed

Viegas, Márcio; Cândido, Cristina; Felgueiras, Joana; Clemente, José; Barros, Sara; Farbota, Rostislav; Vera, Filipa; Matos, Antero; Sousa, Francisco

2017-07-01

The dialysate bicarbonate (DB) influences the acid-base balance in dialysis patients. Very low and high serum bicarbonate (SB) have been related with a higher mortality. Acid-base balance also has been associated with hemodynamic effects in these patients. The trial aim was to compare the effect of DB concentration variation on SB levels in maintenance hemodiafiltration (HDF) patients and the effect on intradialytic hypotension and interdialytic weight gain. A prospective study, with 9 months of follow-up, involving 93 patients, divided in two groups: group 1 and group 2 with a DB of 34 mmol/L and 30 mmol/L, respectively, with monitoring of pre and post HDF SB, intradialytic hypotension, and interdialytic weight gain. Pre dialysis SB was higher in group 1: median concentration of 22.7 mmol/L vs. 21.1 mmol/L (P < 0.001). Post dialysis SB levels were higher in group 1: median concentration of 28.0 mmol/L vs. 25.3 mmol/L (P < 0.001). Post dialysis SB in alkalotic range was only detected in group 1 (51.2% of the patients). No significant differences were detected in intradialytic hypotension rate [28.0 vs. 27.4 episodes per 1000 sessions in group 1 and 2, respectively, (P = 0.906)] or in average interdialytic weight gain [2.9% vs. 3.0% in group 1 and 2, respectively, (P = 0.710)]. DB of 30 mmol/L appears to be associated with SB levels closer to physiological levels than 34 mmol/L. The bicarbonate dialysate, in the tested concentrations, did not appear to have a significant impact on intradialytic hypotension and interdialytic weight gain in maintenance HDF patients. © 2016 International Society for Hemodialysis.

Health-related quality of life before and after bariatric surgery in adolescents.

PubMed

Loux, Tara J; Haricharan, Ramanath N; Clements, Ronald H; Kolotkin, Ronette L; Bledsoe, Samuel E; Haynes, Beverly; Leath, Teresa; Harmon, Carroll M

2008-07-01

Recent data reaffirm decreased health-related quality of life (HRQL) in obese adults and children. Health-related quality of life is markedly improved after bariatric surgery in adults. Little HRQL data are available in adolescents undergoing bariatric surgery. Sixteen patients (14-20 years old) underwent gastric bypass. Thirteen patients completed a general HRQL measure (Short Form 36 [SF-36]) before surgery. Of these, 9 completed the SF-36 again at various follow-up times, as well as a measure of weight-related quality of life (Impact of Weight on Quality of Life-Lite). Three patients completed postsurgical forms only. Data were analyzed using t test and analysis of variance. Results are reported as mean +/- SD. Mean age and body mass index at operation were 18.5 +/- 1.7 years and 54 +/- 7.6 kg/m(2). Postoperatively, patients lost an average of 66% +/- 29% excess weight over a mean follow-up of 17 +/- 12 (range, 1-39) months. Mean preoperative SF-36 physical component score was 34.7 +/- 10 and mental component score was 40.6 +/- 13.5 (adult population mean = 50.0 +/- 10 for each). At last follow-up, mean physical component score had increased to 55.5 +/- 5, and mental component score, to 55.2 +/- 8.6 (P < .0001). Adolescent Impact of Weight on Quality of Life-Lite scores after surgery did not differ from means for normal weight adults (93% +/- 7% vs 96% +/- 7%, P = .15). Health-related quality of life in adolescents and young adults undergoing bariatric surgery improves dramatically in early follow-up. Long-term data are needed to definitively study this surgical therapy for obesity in adolescents.

The impact of food supplementation on infant weight gain in rural Bangladesh; an assessment of the Bangladesh Integrated Nutritional Program (BINP).

PubMed

Begum, Housne Ara; Mascie-Taylor, Cgn; Nahar, Shamsun

2007-01-01

To examine the efficiency of the Bangladesh Integrated Nutritional Program (BINP) in identifying which infants should be supplemented, whether full supplementation was given for the stipulated period of time, and whether the correct exit criteria from the supplementation programme were used. To test whether targeted food supplementation of infants between 6-12 months of age resulted in enhanced weight gain. Mallickbari Union, Bhaluka, a rural area located about 100 km north of Dhaka, Bangladesh. Five hundred and twenty-six infants followed for 6 to 12 months. Of the 526 infants studied, 368 should have received supplementation based on BINP criteria but only 111 infants (30%) did so, while a further 13% were incorrectly given supplementation. So in total over half (52.8%) of the sample was incorrectly identified for supplementation. In addition, less than a quarter of the infants received the full 90 days of supplementation and close to half of the infants exited the programme without the requisite weight gain. Infants were assigned to one of four groups: correctly supplemented, correctly non-supplemented, incorrectly supplemented or incorrectly non-supplemented. This classification provided natural controls; the correctly supplemented infants versus the incorrectly non-supplemented infants, and the correctly non-supplemented infants versus the incorrectly supplemented infants. There were no significant differences in weight gain between the correctly supplemented group and the incorrectly non-supplemented group or between the correctly non-supplemented and the incorrectly supplemented groups, nor was there any evidence of growth faltering in the incorrectly non-supplemented group. This study found serious programmatic deficiencies - inability to identify growth faltering in infants, failure to supplement for the full time period and incorrect exit procedures. There was no evidence that food supplementation had any impact on improving infant weight gain.

A study on ground truth data for impact damaged polymer matrix composites

NASA Astrophysics Data System (ADS)

Wallentine, Sarah M.; Uchic, Michael D.

2018-04-01

This study presents initial results toward correlative characterization of barely-visible impact damage (BVID) in unidirectional carbon fiber reinforced polymer matrix composite laminate plates using nondestructive ultrasonic testing (UT) and destructive serial sectioning microscopy. To produce damage consistent with BVID, plates were impacted using an instrumented drop-weight tower with pneumatic anti-rebound brake. High-resolution, normal-incidence, single-sided, pulse-echo, immersion UT scans were performed to verify and map internal damage after impact testing. UT C-scans were registered to optical images of the specimen via landmark registration and the use of an affine transformation, allowing location of internal damage in reference to the overall plate and enabling specimen preparation for subsequent serial sectioning. The impact-damaged region was extracted from each plate, prepared and mounted for materialographic sectioning. A modified RoboMet.3D version 2 was employed for serial sectioning and optical microscopy characterization of the impact damaged regions. Automated montage capture of sub-micron resolution, bright-field reflection, 12-bit monochrome optical images was performed over the entire specimen cross-section. These optical images were post- processed to produce 3D data sets, including segmentation to improve visualization of damage features. Impact-induced delaminations were analyzed and characterized using both serial sectioning and ultrasonic methods. Those results and conclusions are presented, as well as future direction of the current study.

Carcase weight and dressing percentage are increased using Australian Sheep Breeding Values for increased weight and muscling and reduced fat depth.

PubMed

Gardner, G E; Williams, A; Ball, A J; Jacob, R H; Refshauge, G; Hocking Edwards, J; Behrendt, R; Pethick, D W

2015-01-01

Pre-slaughter live weight, dressing percentage, and hot standard carcase weight (HCWT) from the 2007, 2008, 2009 and 2010 birth-years of the Information Nucleus Flock Lambs (n=7325) were analysed using linear mixed effects models. Increasing the sire breeding value for post-weaning weight (PWWT), and c-site eye muscle depth (PEMD), and reducing the sire breeding value for fat depth (PFAT) all had positive impacts on HCWT. The magnitude of the PWWT effect was greater in pure bred Merinos compared to Maternal and Terminal sired progeny. The improved HCWT resulting from increased PEMD was entirely due to its impact on improving dressing percentage, given that it had no impact on pre-slaughter live weight. There were marked differences between sire types and dam breeds, with pure-bred Merinos having lower pre-slaughter weight, reduced dressing percentage, and lower HCWT than progeny from Terminal and Maternal sired lambs or progeny from Maternal (1st cross) dams. Copyright © 2014 Elsevier Ltd. All rights reserved.

A comparison of analytic hierarchy process and conjoint analysis methods in assessing treatment alternatives for stroke rehabilitation.

PubMed

Ijzerman, Maarten J; van Til, Janine A; Bridges, John F P

2012-01-01

With growing emphasis on patient involvement in health technology assessment, there is a need for scientific methods that formally elicit patient preferences. Analytic hierarchy process (AHP) and conjoint analysis (CA) are two established scientific methods - albeit with very different objectives. The objective of this study was to compare the performance of AHP and CA in eliciting patient preferences for treatment alternatives for stroke rehabilitation. Five competing treatments for drop-foot impairment in stroke were identified. One survey, including the AHP and CA questions, was sent to 142 patients, resulting in 89 patients for final analysis (response rate 63%). Standard software was used to calculate attribute weights from both AHP and CA. Performance weights for the treatments were obtained from an expert panel using AHP. Subsequently, the mean predicted preference for each of the five treatments was calculated using the AHP and CA weights. Differences were tested using non-parametric tests. Furthermore, all treatments were rank ordered for each individual patient, using the AHP and CA weights. Important attributes in both AHP and CA were the clinical outcome (0.3 in AHP and 0.33 in CA) and risk of complications (about 0.2 in both AHP and CA). Main differences between the methods were found for the attributes 'impact of treatment' (0.06 for AHP and 0.28 for two combined attributes in CA) and 'cosmetics and comfort' (0.28 for two combined attributes in AHP and 0.05 for CA). On a group level, the most preferred treatments were soft tissue surgery (STS) and orthopedic shoes (OS). However, STS was most preferred using AHP weights versus OS using CA weights (p < 0.001). This difference was even more obvious when interpreting the individual treatment ranks. Nearly all patients preferred STS according to the AHP predictions, while >50% of the patients chose OS instead of STS, as most preferred treatment using CA weights. While we found differences between AHP and CA, these differences were most likely caused by the labeling of the attributes and the elicitation of performance judgments. CA scenarios are built using the level descriptions, and hence provide realistic treatment scenarios. In AHP, patients only compared less concrete attributes such as 'impact of treatment.' This led to less realistic choices, and thus overestimation of the preference for the surgical scenarios. Several recommendations are given on how to use AHP and CA in assessing patient preferences.

Forces associated with launch into space do not impact bone fracture healing

NASA Astrophysics Data System (ADS)

Childress, Paul; Brinker, Alexander; Gong, Cynthia-May S.; Harris, Jonathan; Olivos, David J.; Rytlewski, Jeffrey D.; Scofield, David C.; Choi, Sungshin Y.; Shirazi-Fard, Yasaman; McKinley, Todd O.; Chu, Tien-Min G.; Conley, Carolynn L.; Chakraborty, Nabarun; Hammamieh, Rasha; Kacena, Melissa A.

2018-02-01

Segmental bone defects (SBDs) secondary to trauma invariably result in a prolonged recovery with an extended period of limited weight bearing on the affected limb. Soldiers sustaining blast injuries and civilians sustaining high energy trauma typify such a clinical scenario. These patients frequently sustain composite injuries with SBDs in concert with extensive soft tissue damage. For soft tissue injury resolution and skeletal reconstruction a patient may experience limited weight bearing for upwards of 6 months. Many small animal investigations have evaluated interventions for SBDs. While providing foundational information regarding the treatment of bone defects, these models do not simulate limited weight bearing conditions after injury. For example, mice ambulate immediately following anesthetic recovery, and in most cases are normally ambulating within 1-3 days post-surgery. Thus, investigations that combine disuse with bone healing may better test novel bone healing strategies. To remove weight bearing, we have designed a SBD rodent healing study in microgravity (μG) on the International Space Station (ISS) for the Rodent Research-4 (RR-4) Mission, which launched February 19, 2017 on SpaceX CRS-10 (Commercial Resupply Services). In preparation for this mission, we conducted an end-to-end mission simulation consisting of surgical infliction of SBD followed by launch simulation and hindlimb unloading (HLU) studies. In brief, a 2 mm defect was created in the femur of 10 week-old C57BL6/J male mice (n = 9-10/group). Three days after surgery, 6 groups of mice were treated as follows: 1) Vivarium Control (maintained continuously in standard cages); 2) Launch Negative Control (placed in the same spaceflight-like hardware as the Launch Positive Control group but were not subjected to launch simulation conditions); 3) Launch Positive Control (placed in spaceflight-like hardware and also subjected to vibration followed by centrifugation); 4) Launch Positive Experimental (identical to Launch Positive Control group, but placed in qualified spaceflight hardware); 5) Hindlimb Unloaded (HLU, were subjected to HLU immediately after launch simulation tests to simulate unloading in spaceflight); and 6) HLU Control (single housed in identical HLU cages but not suspended). Mice were euthanized 28 days after launch simulation and bone healing was examined via micro-Computed Tomography (μCT). These studies demonstrated that the mice post-surgery can tolerate launch conditions. Additionally, forces and vibrations associated with launch did not impact bone healing (p = .3). However, HLU resulted in a 52.5% reduction in total callus volume compared to HLU Controls (p = .0003). Taken together, these findings suggest that mice having a femoral SBD surgery tolerated the vibration and hypergravity associated with launch, and that launch simulation itself did not impact bone healing, but that the prolonged lack of weight bearing associated with HLU did impair bone healing. Based on these findings, we proceeded with testing the efficacy of FDA approved and novel SBD therapies using the unique spaceflight environment as a novel unloading model on SpaceX CRS-10.

Upweighting rare favourable alleles increases long-term genetic gain in genomic selection programs.

PubMed

Liu, Huiming; Meuwissen, Theo H E; Sørensen, Anders C; Berg, Peer

2015-03-21

The short-term impact of using different genomic prediction (GP) models in genomic selection has been intensively studied, but their long-term impact is poorly understood. Furthermore, long-term genetic gain of genomic selection is expected to improve by using Jannink's weighting (JW) method, in which rare favourable marker alleles are upweighted in the selection criterion. In this paper, we extend the JW method by including an additional parameter to decrease the emphasis on rare favourable alleles over the time horizon, with the purpose of further improving the long-term genetic gain. We call this new method dynamic weighting (DW). The paper explores the long-term impact of different GP models with or without weighting methods. Different selection criteria were tested by simulating a population of 500 animals with truncation selection of five males and 50 females. Selection criteria included unweighted and weighted genomic estimated breeding values using the JW or DW methods, for which ridge regression (RR) and Bayesian lasso (BL) were used to estimate marker effects. The impacts of these selection criteria were compared under three genetic architectures, i.e. varying numbers of QTL for the trait and for two time horizons of 15 (TH15) or 40 (TH40) generations. For unweighted GP, BL resulted in up to 21.4% higher long-term genetic gain and 23.5% lower rate of inbreeding under TH40 than RR. For weighted GP, DW resulted in 1.3 to 5.5% higher long-term gain compared to unweighted GP. JW, however, showed a 6.8% lower long-term genetic gain relative to unweighted GP when BL was used to estimate the marker effects. Under TH40, both DW and JW obtained significantly higher genetic gain than unweighted GP. With DW, the long-term genetic gain was increased by up to 30.8% relative to unweighted GP, and also increased by 8% relative to JW, although at the expense of a lower short-term gain. Irrespective of the number of QTL simulated, BL is superior to RR in maintaining genetic variance and therefore results in higher long-term genetic gain. Moreover, DW is a promising method with which high long-term genetic gain can be expected within a fixed time frame.

A prospective study on the impact of peer and parental pressure on body dissatisfaction in adolescent girls and boys.

PubMed

Helfert, Susanne; Warschburger, Petra

2011-03-01

The current study explores the role of appearance-related social pressure regarding changes in body image in adolescent girls (n=236) and boys (n=193) over a 1-year-period. High school students aged 11-16 completed measures of body dissatisfaction (i.e., weight and muscle concerns) and appearance-related social pressure from peers and parents. Three aspects proved to be particularly crucial: Parental encouragement to control weight and shape was a strong predictor of weight concerns in boys and girls alike; influences of friends affected gender-specific body image concerns by leading to weight concerns in girls and muscle concerns in boys; finally appearance-based exclusion was a predictor of weight concerns in boys. The findings provide longitudinal evidence for the crucial impact of appearance-related social pressure and suggest that a detailed assessment of different types of social impacts can identify concrete targets for effective prevention and therapy for weight-related problems among adolescents. Copyright © 2011 Elsevier Ltd. All rights reserved.

More Than Just Accuracy: A Novel Method to Incorporate Multiple Test Attributes in Evaluating Diagnostic Tests Including Point of Care Tests.

PubMed

Thompson, Matthew; Weigl, Bernhard; Fitzpatrick, Annette; Ide, Nicole

2016-01-01

Current frameworks for evaluating diagnostic tests are constrained by a focus on diagnostic accuracy, and assume that all aspects of the testing process and test attributes are discrete and equally important. Determining the balance between the benefits and harms associated with new or existing tests has been overlooked. Yet, this is critically important information for stakeholders involved in developing, testing, and implementing tests. This is particularly important for point of care tests (POCTs) where tradeoffs exist between numerous aspects of the testing process and test attributes. We developed a new model that multiple stakeholders (e.g., clinicians, patients, researchers, test developers, industry, regulators, and health care funders) can use to visualize the multiple attributes of tests, the interactions that occur between these attributes, and their impacts on health outcomes. We use multiple examples to illustrate interactions between test attributes (test availability, test experience, and test results) and outcomes, including several POCTs. The model could be used to prioritize research and development efforts, and inform regulatory submissions for new diagnostics. It could potentially provide a way to incorporate the relative weights that various subgroups or clinical settings might place on different test attributes. Our model provides a novel way that multiple stakeholders can use to visualize test attributes, their interactions, and impacts on individual and population outcomes. We anticipate that this will facilitate more informed decision making around diagnostic tests.

Design and Manufacturing of a Novel Shear Thickening Fluid Composite (STFC) with Enhanced out-of-Plane Properties and Damage Suppression

NASA Astrophysics Data System (ADS)

Pinto, F.; Meo, M.

2017-06-01

The ability to absorb a large amount of energy during an impact event without generating critical damages represents a key feature of new generation composite systems. Indeed, the intrinsic layered nature of composite materials allows the embodiment of specific hybrid plies within the stacking sequence that can be exploited to increase impact resistance and damping of the entire structure without dramatic weight increase. This work is based on the development of an impact-resistant hybrid composite obtained by including a thin layer of Non-Newtonian silica based fluid in a carbon fibres reinforced polymer (CFRP) laminate. This hybrid phase is able to respond to an external solicitation by activating an order-disorder transition that thickens the fluid increasing its viscosity, hence dissipating the energy impact without any critical failure. Several Shear Thickening Fluids (STFs) were manufactured by changing the dimensions of the particles that constitute the disperse phase and their concentrations into the continuous phase. The dynamic viscosity of the different STFs was evaluated via rheometric tests, observing both shear thinning and shear thickening effects depending on the concentration of silica particles. The solutions were then embedded as an active layer within the stacking sequence to manufacture the hybrid CFRP laminates with different embedded STFs. Free vibration tests were carried out in order to assess the damping properties of the different laminates, while low velocity impact tests were used to evaluate their impact properties. Results indicate that the presence of the non-Newtonian fluid is able to absorb up to 45 % of the energy during an impact event for impacts at 2.5 m/s depending on the different concentrations and particles dimensions. These results were confirmed via C-Scan analyses to assess the extent of the internal delamination.

Recent development in the design, testing and impact-damage tolerance of stiffened composite panels

NASA Technical Reports Server (NTRS)

Williams, J. G.; Anderson, M. S.; Rhodes, M. D.; Starnes, J. H., Jr.; Stroud, W. J.

1979-01-01

Structural technology of laminated filamentary-composite stiffened-panel structures under combined inplane and lateral loadings is discussed. Attention is focused on: (1) methods for analyzing the behavior of these structures under load and for determining appropriate structural proportions for weight-efficient configurations; and (2) effects of impact damage and geometric imperfections on structural performance. Recent improvements in buckling analysis involving combined inplane compression and shear loadings and transverse shear deformations are presented. A computer code is described for proportioning or sizing laminate layers and cross-sectional dimensions, and the code is used to develop structural efficiency data for a variety of configurations, loading conditions, and constraint conditions. Experimental data on buckling of panels under inplane compression is presented. Mechanisms of impact damage initiation and propagation are described.

Psychosocial factors as mediators of food insecurity and weight status among middle school students.

PubMed

Willis, Don E; Fitzpatrick, Kevin M

2016-08-01

Research regarding the association between food insecurity and weight status among youth has produced mixed results. However, few studies on this topic have utilized data that includes survey responses from children themselves regarding their experience with food insecurity. This study was undertaken to examine the association between food insecurity and weight status among youth, as well as the potential mediation by psychosocial factors. A survey of 5th-7th grade students was administered to gather information on food insecurity, social and psychological resources, and health. The primary analysis includes OLS (Ordinary Least Squares) regression conducted using SPSS software and Sobel's test for mediation. Results suggest a positive association between food insecurity and weight status even when controlling for key demographic variables. In addition, we find that this association is mediated by psychosocial factors-namely, perceived social status and depression. Insights from this work highlight the need to consider non-nutritional pathways through which food insecurity impacts health as well the need to continue surveying youth directly when examining their experiences with food insecurity. Copyright © 2016 Elsevier Ltd. All rights reserved.

Predicting the ideal serum creatinine of kidney transplant recipients by a simple formula based on the balance between metabolic demands of recipients and renal mass supply from donors.

PubMed

Oh, C K; Lee, B M; Kim, H; Kim, S I; Kim, Y S

2008-09-01

Serum creatinine (Scr) is the most frequently used test to estimate graft function after kidney transplantation. Our previous study demonstrated that the independent predictors of recipient posttransplantation Scr included the ratio of graft weight to recipient body weight, the ratio of graft weight to recipient body surface area (BSA), and the ratio of graft weight to recipient body mass index (BMI). A prospective analysis about the impact of the balance between metabolic demands and renal supply on posttransplantation Scr of recipients was previously reported. We plotted the scatter graph using the X-axis as the independent predictors of Scr by linear regression and the Y-axis as the recipient Scr. To generate the predictive formula of Scr, we calculated a fit of the line of plotted cases using a linear regression method with 2 regression lines for prediction of the upper and lower 95% confidence intervals. Each line was converted into a predictive formula: Scr = -0.0033* (Graft weight(g)/Recipient BSA(m2))+1.75. Under 95% confidence, the Scr ranges from -0.0033* (Graft weight(g)/Recipient BSA(m2))+1.07 to -0.0033* (Graft weight(g)/Recipient BSA (m2))+2.44. Scr = -0.1049* (Graft weight(g)/Recipient body weight(kg))+1.72, which ranges from -0.1049* (Graft weight(g)/Recipient body weight(kg))+1.06 to -0.1049* (Graft weight(g)/Recipient body weight(kg))+2.37. Scr = -0.0158* (Graft weight(g)/Recipient BMI(kg/m2))+1.56, which ranges from -0.0158* (Graft weight(g)/Recipient BMI(kg/m2))+0.75 to -0.0158* (Graft weight(g)/Recipient BMI(kg/m2))+2.26. Prediction of posttransplantation Scr may be achieved by measuring graft weight as well as recipient weight and height. When recipient Scr is significantly higher than that predicted by the formula, a clinician should suspect an underlying graft injury.

It's all relative: The role of object weight in toddlers' gravity bias.

PubMed

Hast, Michael

2018-02-01

Work over the past 20 years has demonstrated a gravity bias in toddlers; when an object is dropped into a curved tube, they will frequently search at a point immediately beneath the entry of the tube rather than in the object's actual location. The current study tested 2- to 3½-year-olds' (N = 88) gravity bias under consideration of object weight. They were tested with either a heavy or light ball, and they had information about either one of the balls only or both balls. Evaluating their first search behavior showed that participants generally displayed the same age trends as other studies had demonstrated, with older toddlers passing more advanced task levels by being able to locate objects in the correct location. Object weight appeared to have no particular impact on the direction of these trends. However, where weight was accessible as relative information, toddlers were younger at passing levels and older at failing levels, although significantly so only from around 3 years of age onward. When they failed levels, toddlers made significantly more gravity errors with the heavy ball when they had information about both balls and made more correct choices with the light ball. As a whole, the findings suggest that nonvisual object variables, such as weight, affect young children's search behaviors in the gravity task, but only if these variables are presented in relation to other objects. This relational information has the potential to enhance or diminish the gravity bias. Copyright © 2017 Elsevier Inc. All rights reserved.

7 CFR 801.9 - Tolerances for test weight apparatuses.

Code of Federal Regulations, 2011 CFR

2011-01-01

... PERFORMANCE REQUIREMENTS FOR GRAIN INSPECTION EQUIPMENT § 801.9 Tolerances for test weight apparatuses. The maintenance tolerances for test weight per bushel apparatuses used in performing official inspection services... 7 Agriculture 7 2011-01-01 2011-01-01 false Tolerances for test weight apparatuses. 801.9 Section...

7 CFR 801.9 - Tolerances for test weight apparatuses.

Code of Federal Regulations, 2010 CFR

2010-01-01

... PERFORMANCE REQUIREMENTS FOR GRAIN INSPECTION EQUIPMENT § 801.9 Tolerances for test weight apparatuses. The maintenance tolerances for test weight per bushel apparatuses used in performing official inspection services... 7 Agriculture 7 2010-01-01 2010-01-01 false Tolerances for test weight apparatuses. 801.9 Section...

Weight loss, dysphagia and supplement intake in patients with amyotrophic lateral sclerosis (ALS): impact on quality of life and therapeutic options

PubMed Central

2013-01-01

Background Weight loss is a frequent feature in the motor neuron disease Amyotrophic lateral sclerosis (ALS). In this study we investigated possible causes of weight loss in ALS, its impact on mood/quality of life (QOL) and the benefit of high calorie nutritional/other dietary supplements and percutaneous endoscopic gastrostomy (PEG). Methods 121 ALS patients were interviewed and answered standardized questionnaires (Beck depression inventory - II, SF36 Health Survey questionnaire, revised ALS functional rating scale). Two years after the initial survey we performed a follow-up interview. Results In our ALS-cohort, 56.3% of the patients suffered from weight loss. Weight loss had a negative impact on QOL and was associated with a shorter survival. Patients who took high calorie nutritional supplements respectively had a PEG stated a great benefit regarding weight stabilization and/or QOL. 38.2% of our patients had significant weight loss without suffering from dysphagia. To clarify the reasons for weight loss in these patients, we compared them with patients without weight loss. The two groups did not differ regarding severity of disease, depression, frontotemporal dementia or fasciculations, but patients with weight loss declared more often increased respiratory work. Conclusions Weight loss is a serious issue in ALS and cannot always be attributed to dysphagia. Symptomatic treatment of weight loss (high calorie nutritional supplements and/ or PEG) should be offered more frequently. PMID:23848967

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Lijuan; Kelly, Kenneth; Walkowicz, Kevin

The National Renewable Energy Laboratory's (NREL's) Fleet Test and Evaluations team recently conducted chassis dynamometer tests of a class 8 conventional regional delivery truck over the Heavy Heavy-Duty Diesel Truck (HHDDT), West Virginia University City (WVU City), and Composite International Truck Local and Commuter Cycle (CILCC) drive cycles. A quantitative study was conducted by analyzing the impacts of various factors on fuel consumption (FC) and fuel economy (FE) by modeling and simulating the truck using NREL's Future Automotive Systems Technology Simulator (FASTSim). Factors used in this study included vehicle weight, and the coefficients of rolling resistance and aerodynamic drag. Themore » simulation results from a single parametric study revealed that FC was approximately a linear function of the weight, coefficient of aerodynamic drag, and rolling resistance over various drive cycles. Among these parameters, the truck weight had the largest effect on FC. The study of the impact of two technologies on FE suggested that, depending on the circumstances, it may be more cost effective to reduce one parameter (such as coefficient of aerodynamic drag) to increase fuel economy, or it may be more beneficial to reduce another (such as the coefficient of rolling resistance). It also provided a convenient way to estimate FE by interpolating within the parameter values and extrapolating outside of them. The simulation results indicated that the FC could be reduced from 38.70 L/100 km, 50.72 L/100 km, and 38.42 L/100 km in the baseline truck to 26.78 L/100 km, 43.14 L/100 km and 29.84 L/100 km over the HHDDT, WVU City and CILCC drive cycles, respectively, when the U.S. Department of Energy's three targeted new technologies were applied simultaneously.« less

Ozone modifies the metabolic and endocrine response to glucose: Reproduction of effects with the stress hormone corticosterone.

PubMed

Thomson, Errol M; Pilon, Shinjini; Guénette, Josée; Williams, Andrew; Holloway, Alison C

2018-03-01

Air pollution is associated with increased incidence of metabolic disease (e.g. metabolic syndrome, obesity, diabetes); however, underlying mechanisms are poorly understood. Air pollutants increase the release of stress hormones (human cortisol, rodent corticosterone), which could contribute to metabolic dysregulation. We assessed acute effects of ozone, and stress axis involvement, on glucose tolerance and on the metabolic (triglyceride), endocrine/energy regulation (insulin, glucagon, GLP-1, leptin, ghrelin, corticosterone), and inflammatory/endothelial (TNF, IL-6, VEGF, PAI-1) response to exogenous glucose. Male Fischer-344 rats were exposed to clean air or 0.8 ppm ozone for 4 h in whole body chambers. Hypothalamic-pituitary-adrenal (HPA) axis involvement in ozone effects was tested through subcutaneous administration of the glucocorticoid synthesis inhibitor metyrapone (50 mg/kg body weight), corticosterone (10 mg/kg body weight), or vehicle (40% propylene glycol) prior to exposure. A glucose tolerance test (2 g/kg body weight glucose) was conducted immediately after exposure, with blood samples collected at 0, 30, 60, 90, and 120 min. Ozone exposure impaired glucose tolerance, an effect accompanied by increased plasma triglycerides but no impairment of insulin release. Ozone diminished glucagon, GLP-1, and ghrelin responses to glucose, but did not significantly impact inflammatory/endothelial analytes. Metyrapone reduced corticosterone but increased glucose and triglycerides, complicating evaluation of the impact of glucocorticoid inhibition. However, administration of corticosterone reproduced the profile of ozone effects, supporting a role for the HPA axis. The results show that ozone-dependent changes in glucose tolerance are accompanied by altered metabolic and endocrine responses to glucose challenge that are reproduced by exogenous stress hormone. Crown Copyright © 2018. Published by Elsevier Inc. All rights reserved.

A framework to assess landscape structural capacity to provide regulating ecosystem services in West Africa.

PubMed

Inkoom, Justice Nana; Frank, Susanne; Greve, Klaus; Fürst, Christine

2018-03-01

The Sudanian savanna landscapes of West Africa are amongst the world's most vulnerable areas to climate change impacts. Inappropriate land use and agriculture management practices continuously impede the capacity of agricultural landscapes to provide ecosystem services (ES). Given the absence of practical assessment techniques to evaluate the landscape's capacity to provide regulating ES in this region, the goal of this paper is to propose an integrative assessment framework which combines remote sensing, geographic information systems, expert weighting and landscape metrics-based assessment. We utilized Analytical Hierarchical Process and Likert scale for the expert weighting of landscape capacity. In total, 56 experts from several land use and landscape management related departments participated in the assessment. Further, we adapted the hemeroby concept to define areas of naturalness while landscape metrics including Patch Density, Shannon's Diversity, and Shape Index were utilized for structural assessment. Lastly, we tested the reliability of expert weighting using certainty measurement rated by experts themselves. Our study focused on four regulating ES including flood control, pest and disease control, climate control, and wind erosion control. Our assessment framework was tested on four selected sites in the Vea catchment area of Ghana. The outcome of our study revealed that highly heterogeneous landscapes have a higher capacity to provide pest and disease control, while less heterogeneous landscapes have a higher potential to provide climate control. Further, we could show that the potential capacities to provide ecosystem services are underestimated by 15% if landscape structural aspects assessed through landscape metrics are not considered. We conclude that the combination of adapted land use and an optimized land use pattern could contribute considerably to lower climate change impacts in West African agricultural landscapes. Copyright © 2017 Elsevier Ltd. All rights reserved.

Impact of intraventricular hemorrhage on cognitive and behavioral outcomes at 18 years of age in low birth weight preterm infants.

PubMed

Ann Wy, P; Rettiganti, M; Li, J; Yap, V; Barrett, K; Whiteside-Mansell, L; Casey, P

2015-07-01

Although high-grade intraventricular hemorrhage (IVH; grades III-IV) in preterm and low birth weight infants are clearly associated with increased risk of long-term adverse neurodevelopmental sequelae, the impact of low-grade IVH (grades I-II) has been less clear. Some studies have followed these infants through early school age and have shown some conflicting results regarding cognitive outcome. Such studies that assess children at younger ages may not accurately predict outcomes in later childhood, as it is known that fluid and crystallized intelligence peak at age 26 years. There is paucity of data in current medical literature, which correlates low-grade IVH with outcomes in early adulthood. To determine the link between the occurrence of low-grade IVH in low birth weight (birth weight ⩽2500 g) infants born prematurely (gestational age <37 weeks) and intellectual function, academic achievement, and behavioral problems to the age of 18 years. This study is an analysis of data derived from the Infant Health and Development Program (IHDP), a multisite national collaborative study and a randomized controlled trial of education intervention for low birth weight infants from birth until 3 years of age with follow-up through 18 years of age. A total of 985 infants were enrolled in the IHDP. Of the 462 infants tested for IVH, 99 demonstrated sonographic evidence of low-grade IVH, whereas 291 showed no sonographic evidence of IVH. Several outcomes were compared between these two groups. Intelligence was assessed using Stanford-Binet Intelligence scales at age 3 years, Wechsler Intelligence Scale for Children (WISC-III) at age 8 years, Wechsler Abbreviated Scale of Intelligence (WASI) at age 18 years and Woodcock Johnson Tests of Achievement at age 8 and 18 years. Behavior was measured using the Achenbach Behavior Checklist at age 3 years and Child Behavior Checklist (CBCL) at age 8 and 18 years. Outcomes were compared between the IVH-positive and IVH-negative groups using analysis of covariance after adjusting for the presence or absence of intervention, birth weight, gestational age, gender, severity of neonatal course, race and maternal education. No statistically significant difference in intelligence as measured by Stanford-Binet Intelligence scales, WISC-III, WASI and Woodcock-Johnson Tests of Achievement could be appreciated between IVH-positive patients and controls at any age group (36 months, 8 years and 18 years of age). In addition, there was no significant difference in problem behavior as assessed by the Achenbach Behavior Checklist and Child Behavior Checklist (CBCL) comparing IVH patients with controls. Low-grade IVH was not demonstrated in our study to be an independent risk factor associated with lower outcomes in intelligence, academic achievement or problem behavior at age 3, 8 and 18 years.

Changes in Parent Motivation Predicts Changes in Body Mass Index z-Score (zBMI) and Dietary Intake Among Preschoolers Enrolled in a Family-Based Obesity Intervention

PubMed Central

Kuhl, Elizabeth S.; Filigno, Stephanie S.; Clifford, Lisa M.; Connor, Jared M.; Stark, Lori J.

2014-01-01

Objectives To examine whether changes in parent motivation over the course of a pediatric obesity intervention are significantly associated with long-term changes in treatment outcomes. Methods Study hypotheses were tested with a secondary data analysis of a randomized controlled trial (N = 42). Study analyses tested whether baseline to posttreatment change in total score for a self-report parent motivation measure (Parent Motivation Inventory [PMI]) was significantly associated with baseline to 6-month follow-up changes in body mass index z-score (zBMI), dietary variables, and physical activity. Results Increases in PMI were significantly associated with decreased zBMI, decreased consumption of sugar-sweetened beverages and sweets, and increased consumption of artificially sweetened beverages. Conclusions Given that increases in parent motivation were associated with some treatment benefits, future research should evaluate the impact of directly assessing and targeting parent motivation on weight outcomes for preschoolers participating in a weight management program. PMID:25016604

Ultra-Lightweight Nanocomposite Foams and Sandwich Structures for Space Structure Applications

NASA Technical Reports Server (NTRS)

Tan, Seng

2012-01-01

Microcellular nanocomposite foams and sandwich structures have been created to have excellent electrical conductivity and radiation-resistant properties using a new method that does not involve or release any toxicity. The nanocomposite structures have been scaled up in size to 12 X 12 in. (30 X 30 cm) for components fabrication. These sandwich materials were fabricated mainly from PE, CNF, and carbon fibers. Test results indicate that they have very good compression and compression-after-impact properties, excellent electrical conductivity, and superior space environment durability. Compression tests show that 1000 ESH (equivalent Sun hours) of UV exposure has no effect on the structural properties of the sandwich structures. The structures are considerably lighter than aluminum alloy (= 36 percent lighter), which translates to 36 percent weight savings of the electronic enclosure and its housing. The good mechanical properties of the materials may enable the electronic housing to be fabricated with a thinner structure that further reduces the weight. There was no difficulty in machining the sandwich specimens into electronic enclosure housing.

Finite element analysis of the high strain rate testing of polymeric materials

NASA Astrophysics Data System (ADS)

Gorwade, C. V.; Alghamdi, A. S.; Ashcroft, I. A.; Silberschmidt, V. V.; Song, M.

2012-08-01

Advanced polymer materials are finding an increasing range of industrial and defence applications. Ultra-high molecular weight polymers (UHMWPE) are already used in lightweight body armour because of their good impact resistance with light weight. However, a broader use of such materials is limited by the complexity of the manufacturing processes and the lack of experimental data on their behaviour and failure evolution under high-strain rate loading conditions. The current study deals with an investigation of the internal heat generation during tensile of UHMWPE. A 3D finite element (FE) model of the tensile test is developed and validated the with experimental work. An elastic-plastic material model is used with adiabatic heat generation. The temperature and stresses obtained with FE analysis are found to be in a good agreement with the experimental results. The model can be used as a simple and cost effective tool to predict the thermo-mechanical behaviour of UHMWPE part under various loading conditions.

Testicular size at weaning in tropically-adapted beef bulls as influenced by breed of sire and dam.

PubMed

Browning, R; Warrington, B G; Holloway, J W; Randel, R D

1997-07-15

This study was conducted to evaluate testicular size at weaning for bulls representing diverse tropically-adapted genotypes. Calves from 2 locations were weighed and castrated at weaning. In one herd, calves were born to Brahman dams and Angus, Tuli, and Brahman sires. Body weights and paired testes weights were heavier (P < 0.01) for Angus x Brahman (AB) genotype than for Tuli x Brahman (TB) and purebred Brahman (BB) genotype calves. The testes:body weight ratio was greater (P < 0.01) for AB than for TB and BB calves. In a second herd, calves were born to Angus cows and Brahman, Tuli, and Senepol sires. Means were similar between Brahman- (BA), Tuli-(TA), and Senepol-sired (SA) calves for body weight and testes:body weight ratio. Paired testes weight was heavier (P < 0.05) for SA than BA calves. Across locations, paired testes weights were heavier (P < 0.01) for TA than TB calves but their body weights were similar. Within-herd deviations were greater (P < 0.01) for AB than BA calves for paired testes weight and testes:body weight ratio. The correlation between the proportion of Bos indicus genetic contribution and testes:body weight ratio was significantly negative. Tropically-adapted calves differed in testicular size at weaning due to breed of sire and dam effects.

Reducing environmental impact of dairy cattle: a Czech case study.

PubMed

Havlikova, Martina; Kroeze, Carolien

2010-07-01

We analyze options to reduce the future environmental impact of dairy cattle production, using an optimization model (DAIRY) applied to the Czech Republic. The DAIRY model can be used to calculate the overall environmental impact (OEI). We show that aquatic eutrophication and global warming are the 2 most important problems caused by dairy cattle. These problems are largely caused by nitrate leaching and emissions from animal housing. The DAIRY model indicates that the costs of reducing the OEI in 2020 by 20% are 12 MEuro. It is most cost effective to achieve this reduction by improving the efficiency of animal manure used as fertilizer. We tested the sensitivity of the model to assumptions about the following: 1) the relative importance of environmental problems as expressed in weighting factors, and 2) future cattle numbers and milk yield per milking cow. The first case indicates that disagreement on which problem is most urgent need not lead to disagreement about policies to be undertaken. Regardless of the weighting factors used, aquatic eutrophication and global warming are the most important problems. However, the overall costs of reducing the OEI differ with alternative sets of weighting factors, because the costs of emission reduction differ among pollutants. The second case shows that the DAIRY model results are more sensitive to changes in cattle numbers than to changes in milk yield. This study is the first integrated assessment of dairy cattle production for a Central European country and illustrates how systematic analyses may help to find optimal solutions. (c) 2010 SETAC.

The Impacts of Rising Temperatures on Aircraft Takeoff Performance

NASA Technical Reports Server (NTRS)

Coffel, Ethan; Thompson, Terence R.; Horton, Radley M.

2017-01-01

Steadily rising mean and extreme temperatures as a result of climate change will likely impact the air transportation system over the coming decades. As air temperatures rise at constant pressure, air density declines, resulting in less lift generation by an aircraft wing at a given airspeed and potentially imposing a weight restriction on departing aircraft. This study presents a general model to project future weight restrictions across a fleet of aircraft with different takeoff weights operating at a variety of airports. We construct performance models for five common commercial aircraft and 19 major airports around the world and use projections of daily temperatures from the CMIP5 model suite under the RCP 4.5 and RCP 8.5 emissions scenarios to calculate required hourly weight restriction. We find that on average, 10 - 30% of annual flights departing at the time of daily maximum temperature may require some weight restriction below their maximum takeoff weights, with mean restrictions ranging from 0.5 to 4% of total aircraft payload and fuel capacity by mid- to late century. Both mid-sized and large aircraft are affected, and airports with short runways and high temperatures, or those at high elevations, will see the largest impacts. Our results suggest that weight restriction may impose a non-trivial cost on airlines and impact aviation operations around the world and that adaptation may be required in aircraft design, airline schedules, and/or runway lengths.

The Impact of Rising Temperatures on Aircraft Takeoff Performance

NASA Astrophysics Data System (ADS)

Coffel, E.; Horton, R. M.; Thompson, T. R.

2017-12-01

Steadily rising mean and extreme temperatures as a result of climate change will likely impact the air transportation system over the coming decades. As air temperatures rise at constant pressure, air density declines, resulting in less lift generation by an aircraft wing at a given airspeed and potentially imposing a weight restriction on departing aircraft. This study presents a general model to project future weight restrictions across a fleet of aircraft with different takeoff weights operating at a variety of airports. We construct performance models for five common commercial aircraft and 19 major airports around the world and use projections of daily temperatures from the CMIP5 model suite under the RCP 4.5 and RCP 8.5 emissions scenarios to calculate required hourly weight restriction. We find that on average, 10-30% of annual flights departing at the time of daily maximum temperature may require some weight restriction below their maximum takeoff weights, with mean restrictions ranging from 0.5 to 4% of total aircraft payload and fuel capacity by mid- to late century. Both mid-sized and large aircraft are affected, and airports with short runways and high tempera- tures, or those at high elevations, will see the largest impacts. Our results suggest that weight restriction may impose a non-trivial cost on airlines and impact aviation operations around the world and that adaptation may be required in aircraft design, airline schedules, and/or runway lengths.

High Performance COPVs for In-Space Storage of High Pressure Cryogenic Fuels

NASA Technical Reports Server (NTRS)

Schneider, Judy; Dyess, Mark; Hastings, Chad; Wang, Jun

2008-01-01

Polymeric composite overwrapped pressure vessels (COPVs) provide an attractive material system to support developing commercial launch business and alternate fuel ventures. However to be able to design with these materials, the mechanical behavior of the materials must be understood with regards to processing, performance, damage tolerance, and environment. For the storage of cryogenic propellants, it is important to evaluate the materials performance and impact damage resistance at cryogenic temperatures in order to minimize weight and to ensure safety and reliability. As part of this study, material tests of candidate fiber and resin systems were used as the basis for the selection of the material combinations for evaluation in a COPV at cryogenic conditions. This comprehensive approach has also been expanded to address issues with impact damage tolerance and material degradation due to environmental factors. KEY WORDS: Cryogenic testing, evaluation and applications for pressure vessels, COPVs, tanks, or storage vessels.

Nondestructive Evaluation of Carbon Fiber Bicycle Frames Using Infrared Thermography

PubMed Central

Ibarra-Castanedo, Clemente; Klein, Matthieu; Maldague, Xavier; Sanchez-Beato, Alvaro

2017-01-01

Bicycle frames made of carbon fibre are extremely popular for high-performance cycling due to the stiffness-to-weight ratio, which enables greater power transfer. However, products manufactured using carbon fibre are sensitive to impact damage. Therefore, intelligent nondestructive evaluation is a required step to prevent failures and ensure a secure usage of the bicycle. This work proposes an inspection method based on active thermography, a proven technique successfully applied to other materials. Different configurations for the inspection are tested, including power and heating time. Moreover, experiments are applied to a real bicycle frame with generated impact damage of different energies. Tests show excellent results, detecting the generated damage during the inspection. When the results are combined with advanced image post-processing methods, the SNR is greatly increased, and the size and localization of the defects are clearly visible in the images. PMID:29156650

Factors affecting the formation of eutectic solid dispersions and their dissolution behavior.

PubMed

Vippagunta, Sudha R; Wang, Zeren; Hornung, Stefanie; Krill, Steven L

2007-02-01

The objective of this work was to obtain a fundamental understanding of the factors, specifically the properties of poorly water-soluble drugs and water-soluble carriers, which influence predominantly, the formation of eutectic or monotectic crystalline solid dispersion and their dissolution behavior. A theoretical model was applied on five poorly water-soluble drugs (fenofibrate, flurbiprofen, griseofulvin, naproxen, and ibuprofen) having diverse physicochemical properties and water-soluble carrier (polyethylene glycol (PEG) 8000) for the evaluation of these factors. Of these, two drugs, fenofibrate and flurbiprofen, and PEG of different molecular weights (3350, 8000, and 20000), were chosen as model drugs and carriers for further investigation. Experimental phase diagrams were constructed and dissolution testing was performed to assess the performance of the systems. The theoretical model predicted the formation of eutectic or monotectic solid dispersions of fenofibrate, griseofulvin, ibuprofen, and naproxen with PEG, holding the contribution of specific intermolecular interactions between compound and carrier to zero. In the case of the flurbiprofen-PEG eutectic system, intermolecular interactions between drug and polymer needed to be taken into consideration to predict the experimental phase diagram. The results of the current work suggest that the thermodynamic function of melting point and heat of fusion (as a measure of crystal energy of drug) plays a significant role in the formation of a eutectic system. Lipophilicity of the compound (as represented by cLog P) was also demonstrated to have an effect. Specific interactions between drug and carrier play a significant role in influencing the eutectic composition. Molar volume of the drug did not seem to have an impact on eutectic formation. The polymer molecular weight appeared to have an impact on the eutectic composition for flurbiprofen, which exhibits specific interactions with PEG, whereas no such impact of polymer molecular weight on eutectic composition was observed for fenofibrate, which does not exhibit specific interactions with PEG. The impact of polymer molecular weight on dissolution of systems where specific drug-polymer interactions are exhibited was also observed. The current work provides valuable insight into factors affecting formation and dissolution of eutectic systems, which can facilitate the rational selection of suitable water-soluble carriers. Copyright (c) 2006 Wiley-Liss, Inc.

Advanced Rotorcraft Transmission (ART) program

NASA Technical Reports Server (NTRS)

Heath, Gregory F.; Bossler, Robert B., Jr.

1993-01-01

Work performed by the McDonnell Douglas Helicopter Company and Lucas Western, Inc. within the U.S. Army/NASA Advanced Rotorcraft Transmission (ART) Program is summarized. The design of a 5000 horsepower transmission for a next generation advanced attack helicopter is described. Government goals for the program were to define technology and detail design the ART to meet, as a minimum, a weight reduction of 25 percent, an internal noise reduction of 10 dB plus a mean-time-between-removal (MTBR) of 5000 hours compared to a state-of-the-art baseline transmission. The split-torque transmission developed using face gears achieved a 40 percent weight reduction, a 9.6 dB noise reduction and a 5270 hour MTBR in meeting or exceeding the above goals. Aircraft mission performance and cost improvements resulting from installation of the ART would include a 17 to 22 percent improvement in loss-exchange ratio during combat, a 22 percent improvement in mean-time-between-failure, a transmission acquisition cost savings of 23 percent of $165K, per unit, and an average transmission direct operating cost savings of 33 percent, or $24K per flight hour. Face gear tests performed successfully at NASA Lewis are summarized. Also, program results of advanced material tooth scoring tests, single tooth bending tests, Charpy impact energy tests, compact tension fracture toughness tests and tensile strength tests are summarized.

Effects of a short burst of gait training with body weight-supported treadmill training for a person with chronic stroke: a single-subject study.

PubMed

Combs, Stephanie A; Miller, Ellen Winchell

2011-04-01

The purpose of this study was to investigate the effects of a short-burst dose of intense gait training with body weight-supported treadmill training (BWSTT) on walking speed, endurance, and quality of life of a participant with chronic stroke. A single-subject experimental (A-B-A-A) design with immediate and 3-month retention phases was used. The participant was a 66-year-old woman, 1 year after left cerebrovascular accident. Repeated baseline walking performance was established during 2 weeks of testing using the comfortable 10-meter walk test (CWT) and the 6-minute walk test (6MWT). The Stroke Impact Scale (SIS) was measured one time during baseline. Baseline testing was followed by ten 30-minute sessions of BWSTT over a 2-week duration. Retention testing was conducted immediately and 3 months following the intervention. Statistically significant improvements from baseline with the CWT and the 6MWT were achieved and maintained by the participant across all subsequent measurement phases. Improvements considered to be clinically meaningful changes in the SIS domains of strength and mobility achieved immediately after the intervention were not maintained at 3-month retention testing. For the participant in this study, the short-burst dosage of BWSTT provided a feasible and effective means for improving goal-oriented functional walking ability.

Experimental investigations of mechanical and reaction responses for drop-weight impacted energetic particles

NASA Astrophysics Data System (ADS)

Bao, Xiao-Wei; Wu, Yan-Qing; Wang, Ming-Yang; Huang, Feng-Lei

2017-02-01

Low-velocity drop-weight impact experiments on individual and multiple Cyclotetramethylene tetranitramine (HMX) energetic particles were performed using a modified drop-weight machine equipped with high-speed photography components. Multiple particles experienced more severe burning reactions than an individual particle. Comparisons between impacted salt and HMX particle show that jetting in HMX is mainly due to the motion of fragmented particles driven by gaseous reaction products. Velocity of jetting, flame propagation, and area expansion were measured via image processing, making it possible to quantify the chemical reaction or mechanical deformation violence at different stages.

Phase 2 program on ground test of refanned JT8D turbofan engines and nacelles for the 727 airplane. Volume 1: Summary

NASA Technical Reports Server (NTRS)

1975-01-01

The propulsion performance, acoustic, structural, and systems changes to a 727-200 airplane retrofitted with a refan modification of the JT8D turbofan engine are evaluated. Model tests, design of certifiable airplane retrofit kit hardware, manufacture of test hardware, ground test of a current production JT8D engine, followed by test of the same engine modified to the refan configuration, detailed analyses of the retrofit impact on airplane airworthiness, performance, and noise, and a preliminary analysis of retrofit costs are included. Results indicate that the refan retrofit of the 727-200 would be certifiable and would result in a 6-to 8 EPNdb reduction in effective perceived noise level (EPNL) at the FAR 36 measuring points and an annoyance-weighted footprint area reduction of 68% to 83%. The installed refan engine is estimated to provide 14% greater takeoff thrust at zero velocity and 10% greater thrust at 100 kn (51.4 m/s). There would be an approximate 0.6% increase in cruise specific fuel consumption (SFC). The refan engine performance in conjunction with the increase in stalled weight results in a range reduction of approximately 15% over the unmodified airplane at the same brake release gross weight (BRGW), with a block fuel increase of 1.5% to 3%. With the particular model 727 that was studied, however, it is possible to operate the airplane (with minor structural modifications) at a higher BRGW and increase the range up to approximately 15% relative to the nonrefanned airplane (with equal or slightly increased noise levels). The JT8D refan engine also improves the limited-field range of the airplane.

Therapeutic alliance in dietetic practice for weight loss: Insights from health coaching.

PubMed

Nagy, Annaliese; McMahon, Anne; Tapsell, Linda; Deane, Frank; Arenson, Danielle

2018-02-13

The psychological construct of 'therapeutic alliance' can be used to better understand the effectiveness of consultations, particularly goal setting for weight management. We analysed audio-recorded health coaching sessions during a weight loss trial to explore relationships between therapeutic alliance and various contextual factors. Audio recordings of 50 health coaching sessions were analysed. After assessing fidelity to the protocol, therapeutic alliance was measured using an adapted Working Alliance Inventory Observer-rated Short Version (WAI-O-S), and examined by (i) identifying relationships between contextual factors and WAI-O-S scores (Spearman's coefficients); (ii) testing the impact of preparatory exercises and body mass index on WAI-O-S scores (one-way analysis of variance and least-squared differences tests) and (iii) comparing differences in WAI-O-S scores based on relationship status, gender and follow-up session completion (independent samples t-tests). Fidelity was high (mean 88%). WAI-O-S total scores ranged from 55 to 70 (out of 84). Session duration was significantly correlated with WAI-O-S component of 'Bond' (r = 0.42, P = 0.002). Those who completed preparatory exercises had significantly higher total WAI-O-S scores, 'Goal' and 'Task' scores. Participants who completed the follow-up session scored significantly higher for 'Goal' compared to no follow-up. Spending more time in a session appears related to increased bonding, a key component of therapeutic alliance. Preparatory work may help build therapeutic alliance and agreement on goals appears to influence follow-up completion. These exploratory findings provide directions for research addressing the professional relationship in dietetic consultations for weight loss. © 2018 Dietitians Association of Australia.

Impact of ballistic body armour and load carriage on walking patterns and perceived comfort.

PubMed

Park, Huiju; Branson, Donna; Petrova, Adriana; Peksoz, Semra; Jacobson, Bert; Warren, Aric; Goad, Carla; Kamenidis, Panagiotis

2013-01-01

This study investigated the impact of weight magnitude and distribution of body armour and carrying loads on military personnel's walking patterns and comfort perceptions. Spatio-temporal parameters of walking, plantar pressure and contact area were measured while seven healthy male right-handed military students wore seven different garments of varying weight (0.06, 9, 18 and 27 kg) and load distribution (balanced and unbalanced, on the front and back torso). Higher weight increased the foot contact time with the floor. In particular, weight placement on the non-dominant side of the front torso resulted in the greatest stance phase and double support. Increased plantar pressure and contact area observed during heavier loads entail increased impact forces, which can cause overuse injuries and foot blisters. Participants reported increasingly disagreeable pressure and strain in the shoulder, neck and lower back during heavier weight conditions and unnatural walking while wearing unbalanced weight distributed loads. This study shows the potentially synergistic impact of wearing body armour vest with differential loads on body movement and comfort perception. This study found that soldiers should balance loads, avoiding load placement on the non-dominant side front torso, thus minimising mobility restriction and potential injury risk. Implications for armour vest design modifications can also be found in the results.

Life-history responses of insects to water-deficit stress: a case study with the aphid Sitobion avenae.

PubMed

Liu, Deguang; Dai, Peng; Li, Shirong; Ahmed, Syed Suhail; Shang, Zheming; Shi, Xiaoqin

2018-05-29

Drought may become one of the greatest challenges for cereal production under future warming scenarios, and its impact on insect pest outbreaks is still controversial. To address this issue, life-history responses of the English grain aphid, Sitobion avenae (Fabricius), from three areas of different drought levels were compared under three water treatments. Significant differences were identified in developmental time, fecundity and adult weight among S. avenae clones from moist, semiarid and arid areas under all the three water treatments. Semiarid and arid area clones tended to have higher heritability for test life-history traits than moist area clones. We identified significant selection of water-deficit on the developmental time of 1st instar nymphs and adult weight for both semiarid and arid area clones. The impact of intermediate and severe water-stress on S. avenae's fitness was neutral and negative (e.g., decreased fecundity and weight), respectively. Compared with arid-area clones, moist- and semiarid-area clones showed higher extents of adaptation to the water-deficit level of their respective source environment. Adult weight was identified as a good indicator for S. avenae's adaptation potential under different water-stress conditions. After their exposure to intermediate water-deficit stress for only five generations, adult weight and fecundity tended to decrease for moist- and semiarid-area clones, but increase for arid-area clones. It is evident from our study that S. avenae clones from moist, semiarid and arid areas have diverged under different water-deficit stress, and such divergence could have a genetic basis. The impact of drought on S. avenae's fitness showed a water-level dependent pattern. Clones of S. avenae were more likely to become adapted to intermediate water-deficit stress than severe water-deficit stress. After continuous water-deficit stress of only five generations, the adaptation potential of S. avenae tended to decrease for moist and semiarid area clones, but increase for arid area clones. The rapid shift of aphids' life-history traits and adaptation potential under drought could have significant implications for their evolutionary dynamics and outbreak risks in future climate change scenarios.

The role of sex and body weight on the metabolic effects of high-fat diet in C57BL/6N mice

PubMed Central

Ingvorsen, C; Karp, N A; Lelliott, C J

2017-01-01

Background: Metabolic disorders are commonly investigated using knockout and transgenic mouse models on the C57BL/6N genetic background due to its genetic susceptibility to the deleterious metabolic effects of high-fat diet (HFD). There is growing awareness of the need to consider sex in disease progression, but limited attention has been paid to sexual dimorphism in mouse models and its impact in metabolic phenotypes. We assessed the effect of HFD and the impact of sex on metabolic variables in this strain. Methods: We generated a reference data set encompassing glucose tolerance, body composition and plasma chemistry data from 586 C57BL/6N mice fed a standard chow and 733 fed a HFD collected as part of a high-throughput phenotyping pipeline. Linear mixed model regression analysis was used in a dual analysis to assess the effect of HFD as an absolute change in phenotype, but also as a relative change accounting for the potential confounding effect of body weight. Results: HFD had a significant impact on all variables tested with an average absolute effect size of 29%. For the majority of variables (78%), the treatment effect was modified by sex and this was dominated by male-specific or a male stronger effect. On average, there was a 13.2% difference in the effect size between the male and female mice for sexually dimorphic variables. HFD led to a significant body weight phenotype (24% increase), which acts as a confounding effect on the other analysed variables. For 79% of the variables, body weight was found to be a significant source of variation, but even after accounting for this confounding effect, similar HFD-induced phenotypic changes were found to when not accounting for weight. Conclusion: HFD and sex are powerful modifiers of metabolic parameters in C57BL/6N mice. We also demonstrate the value of considering body size as a covariate to obtain a richer understanding of metabolic phenotypes. PMID:28394359

Maternal body weight and first trimester screening for chromosomal anomalies.

PubMed

Khambalia, Amina Z; Roberts, Christine L; Morris, Jonathan; Tasevski, Vitomir; Nassar, Natasha

2014-10-01

Prenatal risk ratios for Down syndrome adjust for maternal weight because maternal serum biomarker levels decrease with increasing maternal weight. This is accomplished by converting serum biomarker values into a multiple of the expected median (MoM) for women of the same gestational age. Weight is frequently not recorded, and the impact of using MoMs not adjusted for weight for calculating risk ratios is unknown. The aim of this study is to examine the effect of missing weight on first trimester Down syndrome risk ratios by comparing risk ratios calculated using weight-unadjusted-and-adjusted MoMs. Findings at the population level indicate that the impact of not adjusting for maternal weight on first trimester screening results for chromosomal anomalies would lead to under-identification of 84 per 10,000 pregnancies. © 2014 The Royal Australian and New Zealand College of Obstetricians and Gynaecologists.

Wind Tunnel Strain-Gage Balance Calibration Data Analysis Using a Weighted Least Squares Approach

NASA Technical Reports Server (NTRS)

Ulbrich, N.; Volden, T.

2017-01-01

A new approach is presented that uses a weighted least squares fit to analyze wind tunnel strain-gage balance calibration data. The weighted least squares fit is specifically designed to increase the influence of single-component loadings during the regression analysis. The weighted least squares fit also reduces the impact of calibration load schedule asymmetries on the predicted primary sensitivities of the balance gages. A weighting factor between zero and one is assigned to each calibration data point that depends on a simple count of its intentionally loaded load components or gages. The greater the number of a data point's intentionally loaded load components or gages is, the smaller its weighting factor becomes. The proposed approach is applicable to both the Iterative and Non-Iterative Methods that are used for the analysis of strain-gage balance calibration data in the aerospace testing community. The Iterative Method uses a reasonable estimate of the tare corrected load set as input for the determination of the weighting factors. The Non-Iterative Method, on the other hand, uses gage output differences relative to the natural zeros as input for the determination of the weighting factors. Machine calibration data of a six-component force balance is used to illustrate benefits of the proposed weighted least squares fit. In addition, a detailed derivation of the PRESS residuals associated with a weighted least squares fit is given in the appendices of the paper as this information could not be found in the literature. These PRESS residuals may be needed to evaluate the predictive capabilities of the final regression models that result from a weighted least squares fit of the balance calibration data.

Impact of Financial Incentives for Prenatal Care on Birth Outcomes and Spending

PubMed Central

Rosenthal, Meredith B; Li, Zhonghe; Robertson, Audra D; Milstein, Arnold

2009-01-01

Objective To evaluate the impact of offering US$100 each to patients and their obstetricians or midwives for timely and comprehensive prenatal care on low birth weight, neonatal intensive care admissions, and total pediatric health care spending in the first year of life. Data Sources/Study Setting Claims and enrollment profiles of the predominantly low-income and Hispanic participants of a union-sponsored, health insurance plan from 1998 to 2001. Study Design Panel data analysis of outcomes and spending for participants and nonparticipants using instrumental variables to account for selection bias. Data Collection/Abstraction Methods Data provided were analyzed using t-tests and chi-squared tests to compare maternal characteristics and birth outcomes for incentive program participants and nonparticipants, with and without instrumental variables to address selection bias. Adjusted variables were analyzed using logistic regression models. Principle Findings Participation in the incentive program was significantly associated with lower odds of neonatal intensive care unit admission (0.45; 95 percent CI, 0.23–0.88) and spending in the first year of life (estimated elasticity of −0.07; 95 percent CI, −0.12 to −0.01), but not low birth weight (0.53; 95 percent CI, 0.23–1.18). Conclusion The use of patient and physician incentives may be an effective mechanism for improving use of recommended prenatal care and associated outcomes, particularly among low-income women. PMID:19619248

Stair negotiation in women with fibromyalgia: A descriptive correlational study.

PubMed

Collado-Mateo, Daniel; Domínguez-Muñoz, Francisco J; Olivares, Pedro R; Adsuar, José C; Gusi, Narcis

2017-10-01

Walking up and down stairs is a common and important activity of daily living. Women with fibromyalgia often show a reduced ability to perform this task.The objective of this study was to evaluate the test-retest reliability of stair negotiation tasks and to assess the impact of fibromyalgia symptoms on the ability to negotiate stairs.Forty-two women with fibromyalgia participated in this descriptive correlational study. The relevance of the stair negotiation (both walking up and down) was evaluated by assessing its association with the revised version of the fibromyalgia impact questionnaire (FIQ-R) and other health-related variables. Test-retest reliability was also analyzed. The main outcome measures were time spent walking up and down stairs and impact of fibromyalgia, quality of life, number of falls, weight, and lower limb strength and endurance.The intraclass correlation coefficient (ICC) for stair descent was 0.929 whereas that for ascent was 0.972. The score in these tests correlated significantly with the total score for the FIQ-R and the score for many of dimensions and symptoms: that is, physical function, overall impact of fibromyalgia, pain, energy, stiffness, restorative sleep, tenderness, self-perceived balance problems, and sensitivity.Given the importance of the stair negotiation as activity of daily living and the high reliability, both stair ascent and descent tasks may be useful as outcome measures in studies on patients with fibromyalgia.

Development of a Weight Loss Mobile App Linked With an Accelerometer for Use in the Clinic: Usability, Acceptability, and Early Testing of its Impact on the Patient-Doctor Relationship.

PubMed

Choo, Seryung; Kim, Ju Young; Jung, Se Young; Kim, Sarah; Kim, Jeong Eun; Han, Jong Soo; Kim, Sohye; Kim, Jeong Hyun; Kim, Jeehye; Kim, Yongseok; Kim, Dongouk; Steinhubl, Steve

2016-03-31

Although complications of obesity are well acknowledged and managed by clinicians, management of obesity itself is often difficult, which leads to its underdiagnosis and undertreatment in hospital settings. However, tools that could improve the management of obesity, including self-monitoring, engagement with a social network, and open channels of communication between the patient and doctor, are limited in a clinic-based setting. The objective of our study was to evaluate the usability and acceptability of a newly developed mobile app linked with an accelerometer and its early effects on patient-doctor relationships. From September 2013 to February 2014, we developed a mobile app linked with an accelerometer as a supportive tool for a clinic-based weight loss program. The app used information from electronic health records and delivered tailored educational material. Personal goal setting, as well as monitoring of weight changes and physical activity combined with feedback, are key features of the app. We also incorporated an interactive message board for patients and doctors. During the period of March 2014 to May 2014, we tested our mobile app for 1 month in participants in a hospital clinic setting. We assessed the app's usability and acceptability, as well as the patient-doctor relationship, via questionnaires and analysis of app usage data. We recruited 30 individuals (18 male and 12 female) for the study. The median number of log-ins per day was 1.21, with the most frequently requested item being setting goals, followed by track physical activities and view personal health status. Scales of the depth of the patient-doctor relationship decreased from 27.6 (SD 4.8) to 25.1 (SD 4.5) by a Wilcoxon signed rank test (P=.02). A mobile phone app linked with an accelerometer for a clinic-based weight loss program is useful and acceptable for weight management but exhibited less favorable early effects on patient-doctor relationships.

Protocol of the Low Birth Weight South Asia Trial (LBWSAT), a cluster-randomised controlled trial testing impact on birth weight and infant nutrition of Participatory Learning and Action through women's groups, with and without unconditional transfers of fortified food or cash during pregnancy in Nepal.

PubMed

Saville, Naomi M; Shrestha, Bhim P; Style, Sarah; Harris-Fry, Helen; Beard, B James; Sengupta, Aman; Jha, Sonali; Rai, Anjana; Paudel, Vikas; Pulkki-Brannstrom, Anni-Maria; Copas, Andrew; Skordis-Worrall, Jolene; Bhandari, Bishnu; Neupane, Rishi; Morrison, Joanna; Gram, Lu; Sah, Raghbendra; Basnet, Machhindra; Harthan, Jayne; Manandhar, Dharma S; Osrin, David; Costello, Anthony

2016-10-21

Low birth weight (LBW, < 2500 g) affects one third of newborn infants in rural south Asia and compromises child survival, infant growth, educational performance and economic prospects. We aimed to assess the impact on birth weight and weight-for-age Z-score in children aged 0-16 months of a nutrition Participatory Learning and Action behaviour change strategy (PLA) for pregnant women through women's groups, with or without unconditional transfers of food or cash to pregnant women in two districts of southern Nepal. The study is a cluster randomised controlled trial (non-blinded). PLA comprises women's groups that discuss, and form strategies about, nutrition in pregnancy, low birth weight and hygiene. Women receive up to 7 monthly transfers per pregnancy: cash is NPR 750 (~US$7) and food is 10 kg of fortified sweetened wheat-soya Super Cereal per month. The unit of randomisation is a rural village development committee (VDC) cluster (population 4000-9200, mean 6150) in southern Dhanusha or Mahottari districts. 80 VDCs are randomised to four arms using a participatory 'tombola' method. Twenty clusters each receive: PLA; PLA plus food; PLA plus cash; and standard care (control). Participants are (mostly Maithili-speaking) pregnant women identified from 8 weeks' gestation onwards, and their infants (target sample size 8880 birth weights). After pregnancy verification, mothers may be followed up in early and late pregnancy, within 72 h, after 42 days and within 22 months of birth. Outcomes pertain to the individual level. Primary outcomes include birth weight within 72 h of birth and infant weight-for-age Z-score measured cross-sectionally on children born of the study. Secondary outcomes include prevalence of LBW, eating behaviour and weight during pregnancy, maternal and newborn illness, preterm delivery, miscarriage, stillbirth or neonatal mortality, infant Z-scores for length-for-age and weight-for-length, head circumference, and postnatal maternal BMI and mid-upper arm circumference. Exposure to women's groups, food or cash transfers, home visits, and group interventions are measured. Determining the relative importance to birth weight and early childhood nutrition of adding food or cash transfers to PLA women's groups will inform design of nutrition interventions in pregnancy. ISRCTN75964374 , 12 Jul 2013.

Impact of sickle cell trait on physical growth in tribal children of Mandla district in Madhya Pradesh, India.

PubMed

Qamra, Suneel; Roy, Jyotirmoy; Srivastava, Praval

2011-11-01

Reliable reports on growth impairment in sickle cell trait (SCT) children in India are lacking despite contradictory findings reported earlier. The present study assessed the impact of SCT on physical growth of tribal children of Mandla district. Weight, height, circumferences, breadths, lengths and skinfolds were recorded on 6190 children, inclusive of 732 SCT children, from birth to 12 years of age using a cross-sectional design. The sickle test was conducted in the field using 2% sodium metabisulphite followed by electrophoresis. No significant difference in mean values was observed in the majority of the age groups between SCT and normal children for all 11 body measurements. However, inconsistent growth patterns in these measurements among SCT children were evident. Body weight was more deficient than height or other body measurements in the children when compared to Indian and National Centre for Health Statistics (NCHS) standards, while bicristal breadth was comparable with Indian standards. There was no significant impact of SCT observed on growth of children irrespective of sex. Notably, growth of SCT girls was comparable to their normal counterparts. The actual growth difference between normal and SCT children may have been masked on account of poor attainment of annual gain in each successive age group.

Does impaction of titanium-coated interbody fusion cages into the disc space cause wear debris or delamination?

PubMed

Kienle, Annette; Graf, Nicolas; Wilke, Hans-Joachim

2016-02-01

A large number of interbody fusion cages are made of polyetheretherketone (PEEK). To improve bone on-growth, some are coated with a thin layer of titanium. This coating may fail when subjected to shear loading. The purpose of this testing was to investigate whether impaction of titanium-coated PEEK cages into the disc space can result in wear or delamination of the coating, and whether titanium cages with subtractive surface etching (no coating) are less susceptible to such failure. A biomechanical study was carried out to simulate the impaction process in clinical practice and to evaluate if wear or delamination may result from impaction. Two groups of posterior lumbar interbody fusion cages with a similar geometry were tested: n=6 titanium-coated PEEK and n=6 surface-etched titanium cages. The cages were impacted into the space in between two vertebral body substitutes (polyurethane foam blocks). The two vertebral body substitutes were fixed in a device, through which a standardized axial preload of 390 N was applied. The anterior tip of the cage was positioned at the posterior border of the space between the two vertebral body substitutes. The cages were then inserted using a drop weight with a mass representative of a surgical hammer. The drop weight impacted the insertion instrument at a maximum speed of about 2.6 m/s, which is in the range of the impaction speed in vivo. This was repeated until the cages were fully inserted. The wear particles were captured and analyzed according to the pertinent standards. The surface-etched titanium cages did not show any signs of wear debris or surface damage. In contrast, the titanium-coated PEEK cages resulted in detached wear particles of different sizes (1-191 µm). Over 50% of these particles had a size <10 µm. In median, on 26% of the implants' teeth, the coating was abraded. Full delamination was not observed. In contrast to the surface-etched implants, the titanium-coated PEEK implants lost some coating material. This was visible to the naked eye. More than half of all particles were of a size range that allows phagocytosis. This study shows that titanium-coated implants are susceptible to impaction-related wear debris. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

The detectability half-life in arthropod predator-prey research: what it is, why we need it, how to measure it, and how to use it.

PubMed

Greenstone, Matthew H; Payton, Mark E; Weber, Donald C; Simmons, Alvin M

2014-08-01

Molecular gut-content analysis enables detection of arthropod predation with minimal disruption of ecosystem processes. Most assays produce only qualitative results, with each predator testing either positive or negative for target prey remains. Nevertheless, they have yielded important insights into community processes. For example, they have confirmed the long-hypothesized role of generalist predators in retarding early-season build-up of pest populations prior to the arrival of more specialized predators and parasitoids and documented the ubiquity of secondary and intraguild predation. However, raw qualitative gut-content data cannot be used to assess the relative impact of different predator taxa on prey population dynamics: they must first be weighted by the relative detectability periods for molecular prey remains for each predator-prey combination. If this is not carried out, interpretations of predator impact will be biased towards those with the longest detectabilities. We review the challenges in determining detectability half-lives, including unstated assumptions that have often been ignored in the performance of feeding trials. We also show how detectability half-lives can be used to properly weight assay data to rank predators by their importance in prey population suppression, and how sets of half-lives can be used to test hypotheses concerning predator ecology and physiology. We use data from 32 publications, comprising 97 half-lives, to generate and test hypotheses on taxonomic differences in detectability half-lives and discuss the possible role of the detectability half-life in interpreting qPCR and next-generation sequencing data. © 2013 John Wiley & Sons Ltd.

Design and methods for a randomized clinical trial treating comorbid obesity and major depressive disorder

PubMed Central

Schneider, Kristin L; Bodenlos, Jamie S; Ma, Yunsheng; Olendzki, Barbara; Oleski, Jessica; Merriam, Philip; Crawford, Sybil; Ockene, Ira S; Pagoto, Sherry L

2008-01-01

Background Obesity is often comorbid with depression and individuals with this comorbidity fare worse in behavioral weight loss treatment. Treating depression directly prior to behavioral weight loss treatment might bolster weight loss outcomes in this population, but this has not yet been tested in a randomized clinical trial. Methods and design This randomized clinical trial will examine whether behavior therapy for depression administered prior to standard weight loss treatment produces greater weight loss than standard weight loss treatment alone. Obese women with major depressive disorder (N = 174) will be recruited from primary care clinics and the community and randomly assigned to one of the two treatment conditions. Treatment will last 2 years, and will include a 6-month intensive treatment phase followed by an 18-month maintenance phase. Follow-up assessment will occur at 6-months and 1- and 2 years following randomization. The primary outcome is weight loss. The study was designed to provide 90% power for detecting a weight change difference between conditions of 3.1 kg (standard deviation of 5.5 kg) at 1-year assuming a 25% rate of loss to follow-up. Secondary outcomes include depression, physical activity, dietary intake, psychosocial variables and cardiovascular risk factors. Potential mediators (e.g., adherence, depression, physical activity and caloric intake) of the intervention effect on weight change will also be examined. Discussion Treating depression before administering intensive health behavior interventions could potentially boost the impact on both mental and physical health outcomes. Trial registration NCT00572520 PMID:18793398

Effect of stacking sequence on mechanical properties neem wood veneer plastic composites

NASA Astrophysics Data System (ADS)

Nagamadhu, M.; Kumar, G. C. Mohan; Jeyaraj, P.

2018-04-01

This study investigates the effect of wood veneer stacking sequence on mechanical properties of neem wood polymer composite (WPC) experimentally. Wood laminated samples were fabricated by conventional hand layup technique in a mold and cured under pressure at room temperature and then post cured at elevated temperature. Initially, the tensile, flexural, and impact test were conducted to understand the effect of weight fraction of fiber on mechanical properties. The mechanical properties have increased with the weight fraction of fiber. Moreover the stacking sequence of neem wood plays an important role. As it has a significant impact on the mechanical properties. The results indicated that 0°/0° WPC shows highest mechanical properties as compared to other sequences (90°/90°, 0°/90°, 45°/90°, 45°/45°). The Fourier Transform Infrared Spectroscopy (FTIR) Analysis were carried out to identify chemical compounds both in raw neem wood and neem wood epoxy composite. The microstructure raw/neat neem wood and the interfacial bonding characteristics of neem wood composite investigated using Scanning electron microscopy images.

Nutritional status and feeding-tube placement in patients with locally advanced hypopharyngeal cancer included in an induction chemotherapy-based larynx preservation program.

PubMed

Bozec, Alexandre; Benezery, Karen; Chamorey, Emmanuel; Ettaiche, Marc; Vandersteen, Clair; Dassonville, Olivier; Poissonnet, Gilles; Riss, Jean-Christophe; Hannoun-Lévi, Jean-Michel; Chand, Marie-Eve; Leysalle, Axel; Saada, Esma; Sudaka, Anne; Haudebourg, Juliette; Hebert, Christophe; Falewee, Marie-Noelle; Demard, François; Santini, José; Peyrade, Frédéric

2016-09-01

The objective of the study is to evaluate the nutritional status and determine its impact on clinical outcomes in patients with locally advanced hypopharyngeal cancer included in an induction chemotherapy (ICT)-based larynx preservation program without prophylactic feeding-tube placement. All patients with locally advanced (T3/4, N0-3, M0) hypopharyngeal squamous cell carcinoma, technically suitable for total pharyngolaryngectomy, treated by docetaxel, cisplatin and 5-fluorouracil (TPF)-ICT for larynx preservation at our institution between 2004 and 2013, were included in this retrospective study. Patients' nutritional status was closely monitored. Enteral nutrition was used if and when a patient was unable to sustain per-oral nutrition and hydration. The impact of nutritional status on clinical outcomes was investigated in univariate and multivariate analysis. A total of 53 patients (42 men and 11 women, mean age = 58.6 ± 8.2 years) were included in this study. Six (11.3 %) patients had lost more than 10 % of their usual body weight before therapy. Compared with patients' usual weight, the mean maximum patient weight loss during therapeutic management was 8.7 ± 4.5 kg. Enteral nutrition was required in 17 patients (32 %). We found no influence of the tested nutritional status-related factors on response to ICT, toxicity of ICT, overall, cause-specific and recurrence-free survival, and on post-therapeutic swallowing outcome. Maximum weight loss was significantly associated with a higher risk of enteral tube feeding during therapy (p = 0.03) and of complications (grade ≥3, p = 0.006) during RT. Without prophylactic feeding-tube placement, approximately one-third of the patients required enteral nutrition. There was no significant impact of nutritional status on oncologic or functional outcomes.

The Impact of Sleep, Stress, and Depression on Postpartum Weight Retention: A Systematic Review

PubMed Central

Xiao, Rui S.; Kroll-Desrosiers, Aimee R.; Goldberg, Robert J; Pagoto, Sherry L.; Person, Sharina D.; Waring, Molly E.

2014-01-01

Objective To review the impact of sleep, stress, and/or depression on postpartum weight retention. Methods We searched three electronic databases, PubMed, ISI Web of Science, and PsycInfo. Studies were included if they were published between January 1990 and September 2013 in English, measured sleep, stress, and/or depression in the postpartum period and assessed the association of these factors with postpartum weight retention. Two reviewers reviewed included articles and rated study quality using a modified version of the Downs and Black scale. Results Thirteen studies met our pre-defined eligibility criteria, reporting on 9 study samples. Two were cross-sectional studies and eleven were longitudinal studies. The study sample size ranged from 74 to 37,127. All four studies examining short sleep duration and postpartum weight retention reported a positive association. The four studies examining postpartum stress and weight retention reported non-significant associations only. Of 7 studies examining postpartum depression and weight retention, 3 reported non-significant associations, and 4 reported positive associations. Conclusion Research investigating the impact of postpartum sleep, stress, depression and weight retention is limited. Future longitudinal studies are needed. PMID:25306538

Influence of growth hormone replacement on neurological and psychomotor development. Case report.

PubMed

Motta, Felipe; Eisencraft, Adriana Pasmanik; Crisostomo, Lindiane Gomes

2018-05-14

The height response to the use of growth hormone in short height cases has already been confirmed in the literature. The influence of the insulin-like growth factor 1 (GH-IGF1) axis components on development, function, regeneration, neuroprotection, cognition, and motor functions has been evaluated in experimental studies and in adults with central nervous system lesions. However, there is still little research on the clinical impact of hormone replacement on neurological and psychomotor development. This report presents the case of a patient with excellent weight-height recovery and, even more surprisingly, neurological and psychomotor development in response to use of growth hormone. The result strengthens the correlation between experimental and clinical findings related to cerebral plasticity response to growth hormone in children. A preterm male patient with multiple health problems during the neonatal and young infancy period, who for six years presented with a relevant deficit in growth, bone maturation, and neurological and psychomotor development. At six years of age, he had low stature (z-score -6.89), low growth rate, and low weight (z-score -7.91). He was incapable of sustaining his axial weight, had not developed fine motor skills or sphincter control, and presented with dysfunctional swallowing and language. Supplementary tests showed low IGF-11 levels, with no changes on the image of the hypothalamus-pituitary region, and bone age consistent with three-year-old children - for a chronological age of six years and one month. Growth hormone replacement therapy had a strong impact on the weight-height recovery as well as on the neurological and psychomotor development of this child.

Assessment of Oral Conditions and Quality of Life in Morbid Obese and Normal Weight Individuals: A Cross-Sectional Study

PubMed Central

de Freitas, Adriana Rodrigues; Sales-Peres, Arsênio; Ceneviva, Reginaldo

2015-01-01

The aim of this study was to identify the impact of oral disease on the quality of life of morbid obese and normal weight individuals. Cohort was composed of 100 morbid-obese and 50 normal-weight subjects. Dental caries, community periodontal index, gingival bleeding on probing (BOP), calculus, probing pocket depth, clinical attachment level, dental wear, stimulated salivary flow, and salivary pH were used to evaluate oral diseases. Socioeconomic and the oral impacts on daily performances (OIDP) questionnaires showed the quality of life in both groups. Unpaired Student, Fisher’s Exact, Chi-Square, Mann-Whitney, and Multiple Regression tests were used (p<0.05). Obese showed lower socio-economic level than control group, but no differences were found considering OIDP. No significant differences were observed between groups considering the number of absent teeth, bruxism, difficult mastication, calculus, initial caries lesion, and caries. However, saliva flow was low, and the salivary pH was changed in the obese group. Enamel wear was lower and dentine wear was higher in obese. More BOP, insertion loss, and periodontal pocket, especially the deeper ones, were found in obese subjects. The regression model showed gender, smoking, salivary pH, socio-economic level, periodontal pocket, and periodontal insertion loss significantly associated to obesity. However, both OIDP and BOP did not show significant contribution to the model. The quality of life of morbid obese was more negatively influenced by oral disease and socio-economic factors than in normal weight subjects. PMID:26177268

Desire to Be Underweight: Exploratory Study on a Weight Loss App Community and User Perceptions of the Impact on Disordered Eating Behaviors

PubMed Central

Reddy, Madhu C; Booth, Kayla M; Kvasny, Lynette; Blair, Johnna L; Li, Victor; Poole, Erika S

2017-01-01

Background Mobile health (mHealth) apps for weight loss (weight loss apps) can be useful diet and exercise tools for individuals in need of losing weight. Most studies view weight loss app users as these types of individuals, but not all users have the same needs. In fact, users with disordered eating behaviors who desire to be underweight are also utilizing weight loss apps; however, few studies give a sense of the prevalence of these users in weight loss app communities and their perceptions of weight loss apps in relation to disordered eating behaviors. Objective The aim of this study was to provide an analysis of users’ body mass indices (BMIs) in a weight loss app community and examples of how users with underweight BMI goals perceive the impact of the app on disordered eating behaviors. Methods We focused on two aspects of a weight loss app (DropPounds): profile data and forum posts, and we moved from a broader picture of the community to a narrower focus on users’ perceptions. We analyzed profile data to better understand the goal BMIs of all users, highlighting the prevalence of users with underweight BMI goals. Then we explored how users with a desire to be underweight discussed the weight loss app’s impact on disordered eating behaviors. Results We found three main results: (1) no user (regardless of start BMI) starts with a weight gain goal, and most users want to lose weight; (2) 6.78% (1261/18,601) of the community want to be underweight, and most identify as female; (3) users with underweight BMI goals tend to view the app as positive, especially for reducing bingeing; however, some acknowledge its role in exacerbating disordered eating behaviors. Conclusions These findings are important for our understanding of the different types of users who utilize weight loss apps, the perceptions of weight loss apps related to disordered eating, and how weight loss apps may impact users with a desire to be underweight. Whereas these users had underweight goals, they often view the app as helpful in reducing disordered eating behaviors, which led to additional questions. Therefore, future research is needed. PMID:29025694

Relationship between body composition and vertical ground reaction forces in obese children when walking.

PubMed

Villarrasa-Sapiña, Israel; Serra-Añó, Pilar; Pardo-Ibáñez, Alberto; Gonzalez, Luis-Millán; García-Massó, Xavier

2017-01-01

Obesity is now a serious worldwide challenge, especially in children. This condition can cause a number of different health problems, including musculoskeletal disorders, some of which are due to mechanical stress caused by excess body weight. The aim of this study was to determine the association between body composition and the vertical ground reaction force produced during walking in obese children. Sixteen children participated in the study, six females and ten males [11.5 (1.2) years old, 69.8 (15.5) kg, 1.56 (0.09) m, and 28.36 (3.74) kg/m 2 of body mass index (BMI)]. Total weight, lean mass and fat mass were measured by dual-energy X-ray absorptiometry and vertical forces while walking were obtained by a force platform. The vertical force variables analysed were impact and propulsive forces, and the rate of development of both. Multiple regression models for each vertical force parameter were calculated using the body composition variables as input. The impact force regression model was found to be positively related to the weight of obese children and negatively related to lean mass. The regression model showed lean mass was positively related to the propulsive rate. Finally, regression models for impact and propulsive force showed a direct relationship with body weight. Impact force is positively related to the weight of obese children, but lean mass helps to reduce the impact force in this population. Exercise could help obese persons to reduce their total body weight and increase their lean mass, thus reducing impact forces during sports and other activities. Copyright © 2016 Elsevier Ltd. All rights reserved.

Monitoring therapeutic anticoagulation with low molecular weight heparins: is it useful or misleading?

PubMed

Hammerstingl, C

2008-10-01

Weight adapted low molecular weight heparin (LMWH) treatment is recommended as initial anticoagulant therapy of deep vein thrombosis, pulmonary embolism, in patients with myocardial ischemia or when oral anticoagulation (OAC) must be interrupted peri- operatively. Traditionally unfractioned heparin (UFH) was used as standard short acting anticoagulant, with the therapy monitored by frequent laboratory testing. Currently LMWH have broadly replaced UFH as first- choice anticoagulant due to more preferable pharmacokinetics and a better safety profile. Therapeutic anticoagulation with LMWH can be achieved by subcutaneous weight adapted application and measurement of anti-factor Xa- activity (anti-Xa) has been established as gold standard for LMWH- monitoring. However, since almost all LMWH dosing regimens have been developed empirically without laboratory monitoring, there is still a debate ongoing about the usefulness and impact of anti-Xa-testing. Data are lacking that prove a clear correlation between obtained levels of anti-Xa and the patients' clinical outcome. Newer methods have been developed aiming to determine a broader spectrum of LMWH depending anticoagulant activity. Even though there are some promising preliminary results, these alternative methods are not ready for routine clinical use yet. Nevertheless, current guidelines advise determination of anti-Xa in special patient populations with markedly altered LMWH metabolism or to exclude residual LMWH- activity before surgery at very high risk of bleeding. The aim of this article is to review critically the usefulness of anti- Xa guidance of LMWH- therapy and to give new perspectives on upcoming methods of LMWH- monitoring.

Randomized controlled trial of a good practice approach to treatment of childhood obesity in Malaysia: Malaysian Childhood Obesity Treatment Trial (MASCOT).

PubMed

Wafa, Sharifah W; Talib, Ruzita A; Hamzaid, Nur H; McColl, John H; Rajikan, Roslee; Ng, Lai O; Ramli, Ayiesah H; Reilly, John J

2011-06-01

Few randomized controlled trials (RCTs) of interventions for the treatment of childhood obesity have taken place outside the Western world. To test whether a good practice intervention for the treatment of childhood obesity would have a greater impact on weight status and other outcomes than a control condition in Kuala Lumpur, Malaysia. Assessor-blinded RCT of a treatment intervention in 107 obese 7- to 11-year olds. The intervention was relatively low intensity (8 hours contact over 26 weeks, group based), aiming to change child sedentary behavior, physical activity, and diet using behavior change counselling. Outcomes were measured at baseline and six months after the start of the intervention. Primary outcome was BMI z-score, other outcomes were weight change, health-related quality of life (Peds QL), objectively measured physical activity and sedentary behavior (Actigraph accelerometry over 5 days). The intervention had no significant effect on BMI z score relative to control. Weight gain was reduced significantly in the intervention group compared to the control group (+1.5 kg vs. +3.5 kg, respectively, t-test p < 0.01). Changes in health-related quality of life and objectively measured physical activity and sedentary behavior favored the intervention group. Treatment was associated with reduced rate of weight gain, and improvements in physical activity and quality of life. More substantial benefits may require longer term and more intensive interventions which aim for more substantive lifestyle changes.

The effect of microstructure and strength on the fracture toughness of an 18 ni, 300 grade maraging steel

NASA Technical Reports Server (NTRS)

Psioda, J. A.; Low, J. R., Jr.

1974-01-01

Methods for increasing the strength of maraging steels are discussed. An investigation was conducted to systematically vary the strength of 18 weight percent nickel, 300 grade maraging steel, to isolate any attending microstructural changes, and to study the effects of these changes on the fracture toughness of the alloy. A study aimed at determining the aging behavior of the program alloy was carried out to provide data by which to estimate yield strength. The effects of various alloying materials on the strength of the maraging steel are examined. The mechanical properties of the 300 grade maraging steel were determined by tension tests, fatigue precracked Charpy impact tests, and plane strain fracture toughness tests.

Lightweight engine containment. [Kevlar shielding

NASA Technical Reports Server (NTRS)

Weaver, A. T.

1977-01-01

Kevlar fabric styles and weaves were studied, as well as methods of application for advanced gas turbine engines. The Kevlar material was subjected to high speed impacts by simple projectiles fired from a rifle, as well as more complex shapes such as fan blades released from gas turbine rotors in a spin pit. Just contained data was developed for a variety of weave and/or application techniques, and a comparative containment weight efficiency was established for Kevlar containment applications. The data generated during these tests is being incorporated into an analytical design system so that blade containment trade-off studies between Kevlar and metal case engine structures can be made. Laboratory tests and engine environment tests were performed to determine the survivability of Kevlar in a gas turbine environment.

Use of an Expansion Tube to Examine Scramjet Combustion at Hypersonic Velocities

NASA Technical Reports Server (NTRS)

Rizkalla, Oussama; Bakos, Robert J.; Chinitz, Wallace; Pulsonetti, Maria V; Erdos, John I.

1989-01-01

Combustion testing at total enthalpy conditions corresponding to flight Math numbers in excess of 12 requires the use of impulse facilities. The expansion tube is the only operational facility of its size which can provide these conditions without excessive oxygen dissociation or driver gas contamination. Expansio tube operation is described herein and the operational parameters having the largest impact on its performance are determined. These are: driver-to-intermediate chamber pressure ratio, driver gas molecular weight and specific heat ratio, and driver gas temperature. Increases in the lase named parameter will markedly affect the test section static pressure. Preliminary calibration tests are discussed and test gas conditions which have been achieved are presented. Calculated and experimental test times are compared and the parameters affecting test time are discussed. The direction of future work using this important experimental tool is indicated.

Use of an expansion tube to examine scramjet combustion at hypersonic velocities

NASA Technical Reports Server (NTRS)

Rizkalla, O.; Bakos, R. J.; Pulsonetti, M.; Chinitz, Wallace; Erdos, John I.

1989-01-01

Combustion testing at total enthalpy conditions corresponding to flight Mach numbers in excess of 12 requires the use of impulse facilities. The expansion tube is the only operational facility of its size which can provide these conditions without excessive oxygen dissociation or driver gas contamination. Expansion tube operation is described herein and the operational parameters having the largest impact on its performance are determined. These are: driver-to-intermediate chamber pressure ratio, driver gas molecular weight and specific heat ratio, and driver gas temperature. Increases in the last-named parameter will markedly affect the test section static pressure. Preliminary calibration tests are discussed and test gas conditions which have been achieved are presented. Calculated and experimental test times are compared and the parameters affecting test time are discussed. The direction of future work using this important experimental tool is indicated.

Impact of corrosion test container material in molten fluorides

DOE PAGES

Olson, Luke C.; Fuentes, Roderick E.; Martinez-Rodriguez, Michael J.; ...

2015-10-15

The effects of crucible material choice on alloy corrosion rates in immersion tests in molten LiF–NaF–KF (46.5–11.5-42 mol. %) salt held at 850 °C for 500 hrs are described. Four crucible materials were studied. Molten salt exposures of Incoloy-800H in graphite, Ni, Incoloy-800H, and pyrolytic boron nitride (PyBN) crucibles all led to weight-loss in the Incoloy-800H coupons. Alloy weight loss was ~30 times higher in the graphite and Ni crucibles in comparison to the Incoloy-800H and PyBN crucibles. It is hypothesized galvanic coupling between the alloy coupons and crucible materials contributed to the higher corrosion rates. Alloy salt immersion inmore » graphite and Ni crucibles had similar weight-loss hypothesized to occur due to the rate limiting out diffusion of Cr in the alloys to the surface where it reacts with and dissolves into the molten salt, followed by the reduction of Cr from solution at the molten salt and graphite/Ni interfaces. As a result, both the graphite and the Ni crucibles provided sinks for the Cr, in the formation of a Ni–Cr alloy in the case of the Ni crucible, and Cr carbide in the case of the graphite crucible.« less

Lévy-like behaviour in deterministic models of intelligent agents exploring heterogeneous environments

NASA Astrophysics Data System (ADS)

Boyer, D.; Miramontes, O.; Larralde, H.

2009-10-01

Many studies on animal and human movement patterns report the existence of scaling laws and power-law distributions. Whereas a number of random walk models have been proposed to explain observations, in many situations individuals actually rely on mental maps to explore strongly heterogeneous environments. In this work, we study a model of a deterministic walker, visiting sites randomly distributed on the plane and with varying weight or attractiveness. At each step, the walker minimizes a function that depends on the distance to the next unvisited target (cost) and on the weight of that target (gain). If the target weight distribution is a power law, p(k) ~ k-β, in some range of the exponent β, the foraging medium induces movements that are similar to Lévy flights and are characterized by non-trivial exponents. We explore variations of the choice rule in order to test the robustness of the model and argue that the addition of noise has a limited impact on the dynamics in strongly disordered media.

Comparison of standardized versus individualized caloric prescriptions in the nutritional rehabilitation of inpatients with anorexia nervosa

PubMed Central

Haynos, Ann F.; Snipes, Cassandra; Guarda, Angela; Mayer, Laurel E.; Attia, Evelyn

2015-01-01

Objective Sparse research informs how caloric prescriptions should be advanced during nutritional rehabilitation of inpatients with anorexia nervosa (AN). This study compared the impact of a standardized caloric increase approach, in which increases occurred on a predetermined schedule, to an individualized approach, in which increases occurred only following insufficient weight gain, on rate, pattern, and cumulative amount of weight gain and other weight restoration outcomes. Method This study followed a natural experiment design comparing AN inpatients consecutively admitted before (n = 35) and after (n = 35) an institutional change from individualized to standardized caloric prescriptions. Authors examined the impact of prescription plan on weekly weight gain in the first treatment month using multilevel modeling. Within a subsample remaining inpatient through weight restoration (n = 40), multiple regressions examined the impact of caloric prescription plan on time to weight restoration, length of hospitalization, maximum caloric prescription, discharge BMI, and incidence of activity restriction and edema. Results There were significant interactions between prescription plan and quadratic time on average weekly weight gain (p = .03) and linear time on cumulative weekly weight gain (p < .001). Under the standardized plan, patients gained in an accelerated curvilinear pattern (p = .04) and, therefore, gained cumulatively greater amounts of weight over time (p < .001). Additionally, 30% fewer patients required activity restriction under the standardized plan. Discussion Standardized caloric prescriptions may confer advantage by facilitating accelerated early weight gain and lower incidence of bed rest without increasing the incidence of refeeding syndrome. PMID:26769581

Estimated Nephron Number of the Donor Kidney: Impact on Allograft Kidney Outcomes.

PubMed

Schachtner, T; Reinke, P

Low birth weights have been associated with a reduction in nephron number with compensatory hypertrophy of existing glomeruli. The impact of donor birth weight as an estimate of nephron number on allograft function, however, has not been examined. We collected donor birth weight, kidney weight, and volume from 91 living kidney donor-recipient pairs before nephrectomy and after 12, 36, and 60 months. Nephron number was calculated from donor birth weight and age. Donor birth weight, kidney weight/body surface area (BSA), and kidney volume showed a moderate positive correlation with allograft estimated glomerular filtration rate (eGFR) at 12 months (P < .05). Donor age showed a negative moderate correlation with allograft eGFR at 12 months (P = .015). The strongest correlation with allograft eGFR was observed for calculated donor kidney nephron number at 12, 36, and 60 months (R, 0.340, 0.305, and 0.476, respectively; P < .05). No impact was observed on allograft daily proteinuria of any investigated marker (P > .05). Recipients of donors with birth weight <2.5 kg had need of a significantly greater number of antihypertensive drugs (P < .05). Calculated nephron number from donor birth weight and age is suggested to be superior to donor kidney weight/BSA and volume regarding allograft function. Calculated nephron number could estimate expected eGFR and guide decision making in cases of impaired allograft function. Copyright © 2017 Elsevier Inc. All rights reserved.

Ecological impacts of invasive alien species along temperature gradients: testing the role of environmental matching.

PubMed

Iacarella, Josephine C; Dick, Jaimie T A; Alexander, Mhairi E; Ricciardi, Anthony

2015-04-01

Invasive alien species (IAS) can cause substantive ecological impacts, and the role of temperature in mediating these impacts may become increasingly significant in a changing climate. Habitat conditions and physiological optima offer predictive information for IAS impacts in novel environments. Here, using meta-analysis and laboratory experiments, we tested the hypothesis that the impacts of IAS in the field are inversely correlated with the difference in their ambient and optimal temperatures. A meta-analysis of 29 studies of consumptive impacts of IAS in inland waters revealed that the impacts of fishes and crustaceans are higher at temperatures that more closely match their thermal growth optima. In particular, the maximum impact potential was constrained by increased differences between ambient and optimal temperatures, as indicated by the steeper slope of a quantile regression on the upper 25th percentile of impact data compared to that of a weighted linear regression on all data with measured variances. We complemented this study with an experimental analysis of the functional response (the relationship between predation rate and prey supply) of two invasive predators (freshwater mysid shrimp, Hemimysis anomala and Mysis diluviana) across. relevant temperature gradients; both of these species have previously been found to exert strong community-level impacts that are corroborated by their functional responses to different prey items. The functional response experiments showed that maximum feeding rates of H. anomala and M. diluviana have distinct peaks near their respective thermal optima. Although variation in impacts may be caused by numerous abiotic or biotic habitat characteristics, both our analyses point to temperature as a key mediator of IAS impact levels in inland waters and suggest that IAS management should prioritize habitats in the invaded range that more closely match the thermal optima of targeted invaders.

The academic penalty for gaining weight: a longitudinal, change-in-change analysis of BMI and perceived academic ability in middle school students.

PubMed

Kenney, E L; Gortmaker, S L; Davison, K K; Bryn Austin, S

2015-09-01

Worse educational outcomes for obese children regardless of academic ability may begin early in the life course. This study tested whether an increase in children's relative weight predicted lower teacher- and child-perceived academic ability even after adjusting for standardized test scores. Three thousand three hundred and sixty-two children participating in the Early Childhood Longitudinal Study-Kindergarten Cohort were studied longitudinally from fifth to eighth grade. Heights, weights, standardized test scores in maths and reading, and teacher and self-ratings of ability in maths and reading were measured at each wave. Longitudinal, within-child linear regression models estimated the impact of a change in body mass index (BMI) z-score on change in normalized teacher and student ratings of ability in reading and maths, adjusting for test score. A change in BMI z-score from fifth to eighth grade was not independently associated with a change in standardized test scores. However, adjusting for standardized test scores, an increasing BMI z-score was associated with significant reductions in teacher's perceptions of girls' ability in reading (-0.12, 95% confidence interval (CI): -0.23, -0.03, P=0.03) and boys' ability in math (-0.30, 95% CI: -0.43, -0.17, P<0.001). Among children who were overweight at fifth grade and increased in BMI z-score, there were even larger reductions in teacher ratings for boys' reading ability (-0.37, 95% CI: -0.71, -0.03, P=0.03) and in girls' self-ratings of maths ability (-0.47, 95% CI: -0.83, -0.11, P=0.01). From fifth to eighth grade, increase in BMI z-score was significantly associated with worsening teacher perceptions of academic ability for both boys and girls, regardless of objectively measured ability (standardized test scores). Future research should examine potential interventions to reduce bias and promote positive school climate.

NORMALIZATION, GROUPING, AND WEIGHTING IN LIFE CYCLE IMPACT ASSESSMENT

EPA Science Inventory

This chapter includes a comprehensive overview of weighting methods and principles. The authors propose a very interesting and useful system of criteria for the evaluation of weighting methods; and provide a structured way to discuss the characteristics of weighting methods.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Masuda, Y.; Chiba, N.; Matsuo, Y.

This research proposes to investigate the impact behavior of the steel plate of BWR containment vessels against missiles, caused by the postulated catastrophic failure of components with a high kinetic energy. Although the probability of the occurrence of missiles inside and outside of containment vessels is extremely low, the following items are required to maintain the integrity of containment vessels: the probability of the occurrence of missiles, the weight and energy of missiles, and the impact behavior of containment vessel steel plate against postulated missiles. In connection with the third item, an actualscale missile test was conducted. In addition, amore » computation analysis was performed to confirm the impact behavior against the missiles, in order to search for wide applicability to the various kinds of postulated missiles. This research tries to derive a new empirical formula which carries out the assessment of the integrity of containment vessels.« less

A Feasibility Study of the Flare-Cylinder Configuration as a Reentry Body Shape for an Intermediate Range Ballistic Missile

NASA Technical Reports Server (NTRS)

Garland, B. J.; Hall, J. R.

1958-01-01

A study has been made of a flare-cylinder configuration to investigate its feasibility as a reentry body of an intermediate range ballistic missile. Factors considered were heating, weight, stability, and impact velocity. A series of trajectories covering the possible range of weight-drag ratios were computed for simple truncated nose shapes of varying pointedness, and hence varying weight-drag ratios. Four trajectories were chosen for detailed temperature computation from among those trajectories estimated to be possible. Temperature calculations were made for both "conventional" (for example, copper, Inconel, and stainless steel) and "unconventional" (for example, beryllium and graphite) materials. Results of the computations showed that an impact Mach number of 0.5 was readily obtainable for a body constructed from conventional materials. A substantial increase in subsonic impact velocity above a Mach number of 0.5 was possible without exceeding material temperature limits. A weight saving of up to 134 pounds out of 822 was possible with unconventional materials. This saving represents 78 percent of the structural weight. Supersonic impact would require construction of the body from unconventional materials but appeared to be well within the range of attainability.

Shock recovery analogs and the origin of mesosiderites. [Abstract only

NASA Technical Reports Server (NTRS)

Rowan, L. R.

1994-01-01

The origin of mesosiderites, which consist of approximately equal-weight proportions of Fe-Ni metal and silicates (gabbros, basalts, orthopyroxenites, dunites), remains an interesting and complex problem in meteoritics. There is general agreement that multiple impact events were probably involved in the formation of these brecciated stony-iron meteorites, but given the heterogeneity of mesosiderites, additional processes have been invoked to explain the unique and intricate textural and compositional makeup of mesosiderites. We conducted a series of shock recovery experiments to test the impact event(s) scenario. The results indicated significant similarities between the shocked analogs and many mesosiderites. We have compared our analogs with a suite of thin sections of Barea mesosiderite. I have conducted a series of flash heating experiments in which equal-weight proportions of gabbro and stainless steel (SS304) powders were compressed into small charges and heated under reducing conditions for short times. These experiments were used to bracket localized, peak postshock temperatures in our analog shots and to compare the mixing relations between the silicate and metal. The shock recovery experiments used porous metal-silicate powder starting mixtures, therefore our experiments are most analogous to an impact scenario where the target is an asteroidal regolith surface composed of a loose mixture of Fe-Ni metal and heterogeneous silicates. Analog experiments may really describe a secondary impact process similar to the late-stage, localized impact melting event. This leaves one of the crucial questions about mesosiderite genesis unanswered, namely what is the source of the Fe-Ni metal that is so intimately distributed in these meteorites?

Non-linear effects of soda taxes on consumption and weight outcomes.

PubMed

Fletcher, Jason M; Frisvold, David E; Tefft, Nathan

2015-05-01

The potential health impacts of imposing large taxes on soda to improve population health have been of interest for over a decade. As estimates of the effects of existing soda taxes with low rates suggest little health improvements, recent proposals suggest that large taxes may be effective in reducing weight because of non-linear consumption responses or threshold effects. This paper tests this hypothesis in two ways. First, we estimate non-linear effects of taxes using the range of current rates. Second, we leverage the sudden, relatively large soda tax increase in two states during the early 1990s combined with new synthetic control methods useful for comparative case studies. Our findings suggest virtually no evidence of non-linear or threshold effects. Copyright © 2014 John Wiley & Sons, Ltd.

Effect of weight loss, exercise, or both on cognition and quality of life in obese older adults1234

PubMed Central

Napoli, Nicola; Shah, Krupa; Waters, Debra L; Sinacore, David R; Qualls, Clifford; Villareal, Dennis T

2014-01-01

Background: Obesity impairs cognition and health-related quality of life (HRQOL) in older adults; however, the appropriate treatment of obese older adults remains controversial. Objective: The objective was to determine the independent and combined effects of weight loss and exercise on cognition, mood, and HRQOL in obese older adults. Design: One hundred seven frail, obese older adults were randomly assigned to a control, weight-management (diet), exercise, or weight-management-plus-exercise (diet-exercise) group for 1 y. In this secondary analysis, main outcomes were Modified Mini-Mental State Examination (3MS) and total Impact of Weight on Quality of Life-Lite (IWQOL) scores. Other outcomes included Word Fluency Test, Trail Making Test Parts A and B, and Geriatric Depression Scale (GDS) scores. Results: Scores on the 3MS improved more in the diet (mean ± SE: 1.7 ± 0.4), exercise (2.8 ± 0.4), and diet-exercise (2.9 ± 0.4) groups than in the control group (0.1 ± 0.4) (between-group P = 0.0001–0.04); scores in the diet-exercise group improved more than in the diet group but not more than in the exercise group. Scores on the Word Fluency Test improved more in the exercise (4.1 ± 0.8) and diet-exercise (4.2 ± 0.7) groups than in the control group (−0.8 ± 0.8; both P = 0.001). For the Trail Making Test Part A, scores in the diet-exercise group (−11.8 ± 1.9) improved more than in the control group (−0.8 ± 1.9) (P = 0.001); a similar finding was observed for the Trail Making Test Part B. Scores on the IWQOL improved more in the diet (7.6 ± 1.6), exercise (10.1 ± 1.6), and diet-exercise (14.0 ± 1.4) groups than in the control group (0.3 ± 1.6) (P = 0.0001–0.03); scores in the diet-exercise group improved more than in the diet group but not more than in the exercise group. In the diet-exercise group, peak oxygen consumption and strength changes were independent predictors of 3MS changes; weight and strength changes were independent predictors of IWQOL changes. GDS scores did not change. Conclusions: Weight loss and exercise each improve cognition and HRQOL, but their combination may provide benefits similar to exercise alone. These findings could inform practice guidelines with regard to optimal treatment strategies for obese older adults. This trial was registered atclinicaltrials.govas NCT00146107. PMID:24787497

Long-Term Effects of Weight Loss and Exercise on Biomarkers Associated with Angiogenesis.

PubMed

Duggan, Catherine; Tapsoba, Jean de Dieu; Wang, Ching-Yun; Schubert, Karen E Foster; McTiernan, Anne

2017-12-01

Background: We tested the effect of weight loss on circulating levels of the angiogenic factors VEGF and pigment epithelium-derived factor (PEDF) in postmenopausal overweight/obese women, 18 months after completing a year-long 4-arm randomized controlled trial of behavioral weight loss and/or exercise versus control (i.e., 30 months postrandomization). Methods: The 439 overweight/obese, postmenopausal women, ages 50 to 75 years, were randomized to: diet (goal: 10% weight loss, N = 118), exercise (225 min/wk moderate-to-vigorous activity, N = 117), diet + exercise ( N = 117), or control ( N = 87). At 12 months, 399 women gave a blood sample; 156 returned at 30 months. Biomarkers were measured by immunoassay. Changes were compared using generalized estimating equations, adjusting for baseline BMI, age, and race/ethnicity. Results: Participants randomized to diet, exercise, and diet + exercise arms had greater reductions in VEGF at 30 months (-14.1% P = 0.02; -19.7% P = 0.003; -14.5% P = 0.002, respectively) versus controls (-4.5%). There were no statistically significant changes in PEDF in any intervention arm. Participants maintaining ≥10% of baseline weight loss at 30 months had greater reductions in VEGF versus those who gained weight/had no weight change (-22.3% vs. -10.2% respectively, P = 0.002). Participants maintaining any weight loss had significantly lower levels of PEDF at 30 months versus those who gained weight/no weight change. Conclusions: Sustained weight loss via diet and/or exercise results in reductions in angiogenic factors, and can be maintained up to 30-month follow-up. Limitations include relatively small numbers, and possible bias toward more successful weight loss among women who returned at 30 months. Impact: Maintaining weight loss can achieve long-term reductions in biomarkers of angiogenesis that can persist up to 18 months after completion of a weight loss intervention. Cancer Epidemiol Biomarkers Prev; 26(12); 1788-94. ©2017 AACR . ©2017 American Association for Cancer Research.

Relationships between neonatal weight, limb lengths, skinfold thicknesses, body breadths and circumferences in an Australian cohort.

PubMed

Pomeroy, Emma; Stock, Jay T; Cole, Tim J; O'Callaghan, Michael; Wells, Jonathan C K

2014-01-01

Low birth weight has been consistently associated with adult chronic disease risk. The thrifty phenotype hypothesis assumes that reduced fetal growth impacts some organs more than others. However, it remains unclear how birth weight relates to different body components, such as circumferences, adiposity, body segment lengths and limb proportions. We hypothesized that these components vary in their relationship to birth weight. We analysed the relationship between birth weight and detailed anthropometry in 1270 singleton live-born neonates (668 male) from the Mater-University of Queensland Study of Pregnancy (Brisbane, Australia). We tested adjusted anthropometry for correlations with birth weight. We then performed stepwise multiple regression on birth weight of: body lengths, breadths and circumferences; relative limb to neck-rump proportions; or skinfold thicknesses. All analyses were adjusted for sex and gestational age, and used logged data. Circumferences, especially chest, were most strongly related to birth weight, while segment lengths (neck-rump, thigh, upper arm, and especially lower arm and lower leg) were relatively weakly related to birth weight, and limb lengths relative to neck-rump length showed no relationship. Skinfolds accounted for 36% of birth weight variance, but adjusting for size (neck-rump, thigh and upper arm lengths, and head circumference), this decreased to 10%. There was no evidence that heavier babies had proportionally thicker skinfolds. Neonatal body measurements vary in their association with birth weight: head and chest circumferences showed the strongest associations while limb segment lengths did not relate strongly to birth weight. After adjusting for body size, subcutaneous fatness accounted for a smaller proportion of birth weight variance than previously reported. While heavier babies had absolutely thicker skinfolds, this was proportional to their size. Relative limb to trunk length was unrelated to birth weight, suggesting that limb proportions at birth do not index factors relevant to prenatal life.

Relationships between Neonatal Weight, Limb Lengths, Skinfold Thicknesses, Body Breadths and Circumferences in an Australian Cohort

PubMed Central

Pomeroy, Emma; Stock, Jay T.; Cole, Tim J.; O'Callaghan, Michael; Wells, Jonathan C. K.

2014-01-01

Background Low birth weight has been consistently associated with adult chronic disease risk. The thrifty phenotype hypothesis assumes that reduced fetal growth impacts some organs more than others. However, it remains unclear how birth weight relates to different body components, such as circumferences, adiposity, body segment lengths and limb proportions. We hypothesized that these components vary in their relationship to birth weight. Methods We analysed the relationship between birth weight and detailed anthropometry in 1270 singleton live-born neonates (668 male) from the Mater-University of Queensland Study of Pregnancy (Brisbane, Australia). We tested adjusted anthropometry for correlations with birth weight. We then performed stepwise multiple regression on birth weight of: body lengths, breadths and circumferences; relative limb to neck-rump proportions; or skinfold thicknesses. All analyses were adjusted for sex and gestational age, and used logged data. Results Circumferences, especially chest, were most strongly related to birth weight, while segment lengths (neck-rump, thigh, upper arm, and especially lower arm and lower leg) were relatively weakly related to birth weight, and limb lengths relative to neck-rump length showed no relationship. Skinfolds accounted for 36% of birth weight variance, but adjusting for size (neck-rump, thigh and upper arm lengths, and head circumference), this decreased to 10%. There was no evidence that heavier babies had proportionally thicker skinfolds. Conclusions Neonatal body measurements vary in their association with birth weight: head and chest circumferences showed the strongest associations while limb segment lengths did not relate strongly to birth weight. After adjusting for body size, subcutaneous fatness accounted for a smaller proportion of birth weight variance than previously reported. While heavier babies had absolutely thicker skinfolds, this was proportional to their size. Relative limb to trunk length was unrelated to birth weight, suggesting that limb proportions at birth do not index factors relevant to prenatal life. PMID:25162658

Cash and in-kind transfers lead to excess weight gain in a population of women with a high prevalence of overweight in rural Mexico.

PubMed

Leroy, Jef L; Gadsden, Paola; González de Cossío, Teresa; Gertler, Paul

2013-03-01

There is a growing concern that food or cash transfer programs may contribute to overweight and obesity in adults. We studied the impact of Mexico's Programa de Apoyo Alimentario (PAL), which provided very poor rural households with cash or in-kind transfers, on women's body weight. A random sample of 208 rural communities in southern Mexico was randomly assigned to 1 of 4 groups: food basket with or without health and nutrition education, cash with education, or control. The impact on women's weight was estimated in a cohort of 3010 women using a difference-in-difference model. We compared the impact between the food basket and cash groups and evaluated whether the impact was modified by women's BMI status at baseline. With respect to the control group, the program increased women's weight in the food basket (550 ± 210 g; P = 0.004) and the cash group (420 ± 230 g; P = 0.032); this was equivalent to 70 and 53% increases in weight gain, respectively, over that observed in the control group in a 23-mo time period. The greatest impact was found in already obese women: 980 ± 290 g in the food basket group (P = 0.001) and 670 ± 320 g in the cash group (P = 0.019). Impact was marginally significant in women with a preprogram BMI between 25 and 30 kg/m2: 490 ± 310 g (P = 0.055) and 540 ± 360 g (P = 0.067), respectively. No program impact was found in women with a BMI <25 kg/m2. Providing households with a considerable amount of unrestricted resources led to excess weight gain in an already overweight population. Research is needed to develop cost-effective behavior change communication strategies to complement cash and in-kind transfer programs such as PAL and to help beneficiaries choose healthy diets that improve the nutritional status of all family members.

40 CFR 799.9539 - TSCA mammalian erythrocyte micronucleus test.

Code of Federal Regulations, 2010 CFR

2010-07-01

... peripheral blood). (iv) Limit test. If a test at one dose level of at least 2,000 mg/kg body weight using a... dose is 2,000 mg/kg/body weight/day for treatment up to 14 days, and 1,000 mg/kg/body weight/day for... water test substance concentration parts per million (ppm) to the actual dose (mg/kg body weight/day...

Impact of selection for residual feed intake on production traits and behavior of mule ducks.

PubMed

Drouilhet, L; Monteville, R; Molette, C; Lague, M; Cornuez, A; Canario, L; Ricard, E; Gilbert, H

2016-09-01

A divergent selection experiment of Muscovy sires based on the residual feed intake (RFI) of their male mule progeny was initiated in 2009. Using electronic feeders, the aim of this study was to establish whether 3 generations of selection for RFI had an impact on feeding behavior traits and general behavior, and to examine its effect on liver and meat quality. Eighty mule ducks, issued from 8 Muscovy drakes per line with extreme RFI, were tested in a pen equipped with 4 electronic feeders. Feeding behaviors were recorded from 3 to 7 wk after hatching under ad libitum feeding conditions. Then animals were prepared for overfeeding with a 3-week period of restricted feeding, and overfed during 12 d before slaughter. The RFI was significantly lower in the low RFI line than in the high RFI line (-5.4 g/d, P = 0.0005) and daily feed intake was reduced both over the entire test period (-5 g/d, P = 0.049) and on a weekly basis (P = 0.006). Weekly and total feed conversion ratios were also significantly lower (-0.08, P = 0.03 and -0.06, P = 0.01, respectively). Low RFI ducks had more frequent meals, spent as much time eating as high RFI ducks, and their feeding rate was lower when analyzed at the wk level only. Additionally no significant correlation between feed efficiency and feeding behavior traits was evidenced, indicating only limited relationships between RFI and feeding patterns. Some differences in behavioral responses to stressors (open field test combined with a test measuring the response to human presence) suggested that a lower RFI is associated with less fearfulness. Selection for RFI had no effect on liver weight and quality and a slightly deleterious impact on meat quality (decreased drip loss and L*). Finally, low RFI animals had higher body weights after restricted feeding from wk 10 to wk 12 and after overfeeding than high RFI ducks. This suggests that selection for reduced RFI until 7 wk of age increases the feed efficiency up to slaughter. © The Author 2016. Published by Oxford University Press on behalf of Poultry Science Association.

Impact of selection for residual feed intake on production traits and behavior of mule ducks

PubMed Central

Drouilhet, L.; Monteville, R.; Molette, C.; Lague, M.; Cornuez, A.; Canario, L.; Ricard, E.; Gilbert, H.

2016-01-01

A divergent selection experiment of Muscovy sires based on the residual feed intake (RFI) of their male mule progeny was initiated in 2009. Using electronic feeders, the aim of this study was to establish whether 3 generations of selection for RFI had an impact on feeding behavior traits and general behavior, and to examine its effect on liver and meat quality. Eighty mule ducks, issued from 8 Muscovy drakes per line with extreme RFI, were tested in a pen equipped with 4 electronic feeders. Feeding behaviors were recorded from 3 to 7 wk after hatching under ad libitum feeding conditions. Then animals were prepared for overfeeding with a 3-week period of restricted feeding, and overfed during 12 d before slaughter. The RFI was significantly lower in the low RFI line than in the high RFI line (−5.4 g/d, P = 0.0005) and daily feed intake was reduced both over the entire test period (−5 g/d, P = 0.049) and on a weekly basis (P = 0.006). Weekly and total feed conversion ratios were also significantly lower (−0.08, P = 0.03 and −0.06, P = 0.01, respectively). Low RFI ducks had more frequent meals, spent as much time eating as high RFI ducks, and their feeding rate was lower when analyzed at the wk level only. Additionally no significant correlation between feed efficiency and feeding behavior traits was evidenced, indicating only limited relationships between RFI and feeding patterns. Some differences in behavioral responses to stressors (open field test combined with a test measuring the response to human presence) suggested that a lower RFI is associated with less fearfulness. Selection for RFI had no effect on liver weight and quality and a slightly deleterious impact on meat quality (decreased drip loss and L*). Finally, low RFI animals had higher body weights after restricted feeding from wk 10 to wk 12 and after overfeeding than high RFI ducks. This suggests that selection for reduced RFI until 7 wk of age increases the feed efficiency up to slaughter. PMID:27333975

Effects on body weight and body composition of a low-dose oral estroprogestin containing ethinyl estradiol 20 microg plus levonorgestrel 100 microg.

PubMed

Lello, Stefano; Vittori, Giorgio; Paoletti, Anna Maria; Sorge, Roberto; Guardianelli, Francesca; Melis, Gian Benedetto

2007-11-01

Weight gain is a common problem reported by users of estroprogestins (EPs) and is a frequent reason for EP discontinuation, even if this problem is not confirmed in several clinical studies. We studied the impact of a EP containing ethinyl estradiol (EE) 20 microg plus levonorgestrel (LNG) 100 microg on body weight (BW) and body composition in 47 treated women and 31 women as controls. Also, we studied the effect of this association on metabolic parameters (glycemia, lipid profile). EE20/LNG100 had no significant impact on body weight, body composition (fat mass, fat-free mass, total body water, intracellular water, extracellular water) or metabolic profile in comparison with no treatment. Thus, the use of EE20/LNG100 showed no impact on metabolic parameters, body weight and body composition. This could be important not only for the safety profile of this combination, but also in increasing patient compliance.

Effect of age and carcass weight on quality traits of m. rectus abdominis from Charolais heifers.

PubMed

Ellies-Oury, M P; Dumont, R; Perrier, G; Roux, M; Micol, D; Picard, B

2017-04-01

In practice cattle may be slaughtered at different combinations of age and weight. As each of these factors could affect meat quality traits, the present work aimed to identify which combination can be expected to increase overall meat quality of m. rectus abdominis of Charolais heifers. Totally, 40 heifers were slaughtered either at 26±1 or at 36±1 months of age. Young heifers were sampled at two different carcass weights (349±12 and 394±8 kg). Old heifers were also sampled at two different carcass weights (397±6 and 451±9 kg). The m. rectus abdominis was excised 24 h postmortem to determine metabolic enzyme activities, myosin heavy-chain isoform proportions, lipid contents, collagen content and collagen solubility. Shear force measurements were evaluated on raw and broiled meat after 14 days of ageing. Meat quality traits scored between 0 and 10 by sensory analysis. Increasing slaughter age from 26 to 36 months had no impact on either raw/broiled shear force (0.31⩽P⩽0.47) and/or meat quality traits (0.62⩽P⩽0.91) or on physicochemical properties of heifer's meat samples. Increasing carcass weight for a similar slaughter age of 26 months had also impact neither on meat quality traits (0.52⩽P⩽0.91) nor on muscular properties. On the contrary, increasing carcass weight for a similar slaughter age of 36 months had induced a decrease of muscular shear force (raw muscle; P=0.009) and a concomitant decrease of total collagen content (P=0.03). Nevertheless, no significant impact on meat quality traits was revealed by the sensorial panel (0.13⩽P⩽0.49). Metabolic enzyme activities (0.13⩽P⩽0.86) and myosin heavy-chain proportions (0.13⩽P⩽0.96) were not significantly impacted by slaughter age and carcass weight. Thus, the impact of increasing carcass weight and/or slaughter age in young Charolais heifers has a limited impact on meat quality traits and associated muscular characteristics. Modulating heifer's cycles (age and/or carcass weight in the studied range) appears to be a way to answer to the numerous marketing chains, without penalising meat quality traits.

Comparison of The Dimensional Stability of Kel-F 81 and Neoflon CTFE M400H Polychlorotrifluoroethylenes Used in Valve Seat Application

NASA Technical Reports Server (NTRS)

Waller, Jess M.; Beeson, Harold D.; Newton, Barry E.; Fries, Joseph (Technical Monitor)

2000-01-01

The dimensional stability of polychlorotrifluoroethylene (PCTFE) valve seats used in oxygen regulator applications was determined by thermomechanical analysis (TMA). Two traceable grades of PCTFE were tested; Kel-F 81 and Neoflon CTFE M400H. For these particular resins, the effect of percent crystallinity, zero strength time (ZST) molecular weight, resin grade, process history (compression-molded versus extruded) on the dimensional stability and annealing behavior was determined. In addition to the traceable Kel-F 81 and Neoflon CTFE M400H grades, actual PCI'PH valve seats of differing geometry and design were tested by TMA. The PCTFE valve seats were of unspecified resin grade, although certain inferences about the grade could be drawn based on knowledge of the valve seat fabrication date. Results consistently revealed dimensional instability of varying magnitude at temperatures ranging from 40 to 70 degrees Celsius. Furthermore, some of the pre- 1 995 seats appeared to be more dimensionally stable than those fabricated after 1995. The TMA results are discussed in the context of several proposed ignition mechanisms; namely, particle impact, presence of contaminant oils and fibers, and localized heating by flow friction and/or resonance. The effect of metal constraint on the dimensional stability of PCTFE is also discussed. Finally, the effect of percent crystallinity, ZST molecular weight, resin grade, process history (compression-molded versus extruded) on the AIT, delta Hc and impact sensitivity of various types of Neoflon CTFE M400H was determined using Kel-F 81 as a control. Results show that the AIT, delta Hc and impact sensitivity were essentially independent of Neoflon CTFE process history and structure.

SLUDGE BATCH 4 BASELINE MELT RATE FURNACE AND SLURRY-FED MELT RATE FURNACE TESTS WITH FRITS 418 AND 510 (U)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, M. E.; Jones, T. M.; Miller, D. H.

Several Slurry-Fed Melt Rate Furnace (SMRF) tests with earlier projections of the Sludge Batch 4 (SB4) composition have been performed.1,2 The first SB4 SMRF test used Frits 418 and 320, however it was found after the test that the REDuction/OXidation (REDOX) correlation at that time did not have the proper oxidation state for manganese. Because the manganese level in the SB4 sludge was higher than previous sludge batches tested, the impact of the higher manganese oxidation state was greater. The glasses were highly oxidized and very foamy, and therefore the results were inconclusive. After resolving this REDOX issue, Frits 418,more » 425, and 503 were tested in the SMRF with the updated baseline SB4 projection. Based on dry-fed Melt Rate Furnace (MRF) tests and the above mentioned SMRF tests, two previous frit recommendations were made by the Savannah River National Laboratory (SRNL) for processing of SB4 in the Defense Waste Processing Facility (DWPF). The first was Frit 503 based on the June 2006 composition projections.3 The recommendation was changed to Frit 418 as a result of the October 2006 composition projections (after the Tank 40 decant was implemented as part of the preparation plan). However, the start of SB4 processing was delayed due to the control room consolidation outage and the repair of the valve box in the Tank 51 to Tank 40 transfer line. These delays resulted in changes to the projected SB4 composition. Due to the slight change in composition and based on preliminary dry-fed MRF testing, SRNL believed that Frit 510 would increase throughput in processing SB4 in DWPF. Frit 418, which was used in processing Sludge Batch 3 (SB3), was a viable candidate and available in DWPF. Therefore, it was used during the initial SB4 processing. Due to the potential for higher melt rates with Frit 510, SMRF tests with the latest SB4 composition (1298 canisters) and Frits 510 and 418 were performed at a targeted waste loading (WL) of 35%. The '1298 canisters' describes the number of equivalent canisters that would be produced from the beginning of the current contract period before SB3 is blended with SB4. The melt rate for the SMRF SB4/Frit 510 test was 14.6 grams/minute. Due to cold cap mounding problems with the SMRF SB4/Frit 418 feed at 50 weight % solids that prevented a melt rate determination, this feed was diluted to 45 weight % solids. The melt rate for this diluted feed was 8.9 grams/minute. A correction factor of 1.2 for estimating the melt rate at 50 weight % solids from 45 weight % solids test results (based on previous SMRF testing5) was then used to estimate a melt rate of 10.7 grams/minute for SB4/Frit 418 at 50 weight % solids. Therefore, the use of Frit 510 versus Frit 418 with SB4 resulted in a higher melt rate (14.6 versus an estimated 10.7 grams/minute). For reference, a previous SMRF test with SB3/Frit 418 feed at 35% waste loading and 50 weight % solids resulted in a melt rate of 14.1 grams/minute. Therefore, depending on the actual feed rheology, the use of Frit 510 with SB4 could result in similar melt rates as experienced with SB3/Frit 418 feed in the DWPF.« less

Míranos! Look at us, we are healthy! An environmental approach to early childhood obesity prevention.

PubMed

Yin, Zenong; Parra-Medina, Deborah; Cordova, Alberto; He, Meizi; Trummer, Virginia; Sosa, Erica; Gallion, Kipling J; Sintes-Yallen, Amanda; Huang, Yaling; Wu, Xuelian; Acosta, Desiree; Kibbe, Debra; Ramirez, Amelie

2012-10-01

Obesity prevention research is sparse in young children at risk for obesity. This study tested the effectiveness of a culturally tailored, multicomponent prevention intervention to promote healthy weight gain and gross motor development in low-income preschool age children. Study participants were predominantly Mexican-American children (n = 423; mean age = 4.1; 62% in normal weight range) enrolled in Head Start. The study was conducted using a quasi-experimental pretest/posttest design with two treatment groups and a comparison group. A center-based intervention included an age-appropriate gross motor program with structured outdoor play, supplemental classroom activities, and staff development. A combined center- and home-based intervention added peer-led parent education to create a broad supportive environment in the center and at home. Primary outcomes were weight-based z-scores and raw scores of gross motor skills of the Learning Achievement Profile Version 3. Favorable changes occurred in z-scores for weight (one-tailed p < 0.04) for age and gender among children in the combined center- and home-based intervention compared to comparison children at posttest. Higher gains of gross motor skills were found in children in the combined center- and home-based (p < 0.001) and the center-based intervention (p < 0.01). Children in both intervention groups showed increases in outdoor physical activity and consumption of healthy food. Process evaluation data showed high levels of protocol implementation fidelity and program participation of children, Head Start staff, and parents. The study demonstrated great promise in creating a health-conducive environment that positively impacts weight and gross motor skill development in children at risk for obesity. Program efficacy should be tested in a randomized trial.

Minimal Impact by Antenatal Subpatent Plasmodium falciparum Infections on Delivery Outcomes in Malawian Women: A Cohort Study.

PubMed

Taylor, Steve M; Madanitsa, Mwayiwawo; Thwai, Kyaw-Lay; Khairallah, Carole; Kalilani-Phiri, Linda; van Eijk, Anna M; Mwapasa, Victor; Ter Kuile, Feiko O; Meshnick, Steven R

2017-08-01

Antenatal malaria screening with a rapid diagnostic test (RDT) and treatment only of women with positive RDT findings may potentially prevent low birth weight resulting from malaria. The consequences of subpatent antenatal infections below the detection limit of RDTs are incompletely understood. In Malawi, pregnant women of any gravidity status were tested at each antenatal visit for Plasmodium falciparum, using an RDT and polymerase chain reaction analysis, and were followed until delivery. Associations between antenatal infections and delivery outcomes were assessed with Poisson regression or analysis of variance. Compared with women with no detected antenatal P. falciparum infection, women with positive RDT findings delivered babies with a lower mean birth weight (2960 vs 2867 g; mean difference, -93 g [95% confidence interval {CI}, -27 to -159]; P = .006); this was not observed among women with only subpatent infections (mean birth weight, 3013 g; mean difference, 54 [95% CI, -33-140]; P = .2268). These differences were apparent early in pregnancy, during the second trimester: compared with uninfected women, women with positive RDT findings delivered babies with a lower mean birth weight (mean difference, -94 g [95% CI, -31 to -156]; P = .003), but women with subpatent infections did not (mean difference, 36 g [95% CI, -49-122]; P = .409). Subpatent antenatal P. falciparum infections were not associated with adverse delivery outcomes. The association of patent infections at enrollment with low birth weight suggests the importance of preventing P. falciparum infection early in pregnancy. © The Author 2017. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail: journals.permissions@oup.com.

Low-glycemic load decreases postprandial insulin and glucose and increases postprandial ghrelin in white but not black women.

PubMed

Brownley, Kimberly A; Heymen, Steve; Hinderliter, Alan L; Galanko, Joseph; Macintosh, Beth

2012-07-01

Alterations in appetite hormones favoring increased postprandial satiety have been implicated in both the glycemic control and potential weight-loss benefits of a low-glycemic diet. Racial differences exist in dietary glycemic load and appetite hormone concentrations. This study examined the impact of glycemic load on appetite hormones in 20 black women [10 normal weight, BMI = 22.8 ± 1.42 (mean ± SD); 10 obese, BMI = 35.1 ± 2.77] and 20 white women (10 normal weight, BMI = 22.9 ± 1.45; 10 obese, BMI = 34.3 ± 2.77). Each woman completed two 4.5-d weight-maintenance, mixed-macronutrient, high-glycemic vs. low-glycemic load diets that concluded with a test meal of identical composition. Blood samples collected before and serially for 3 h after each test meal were assayed for plasma ghrelin and serum insulin and glucose concentrations. Compared with the high-glycemic load meal, the low-glycemic load meal was associated with lower insulin(AUC) (P = 0.02), glucose(AUC) (P = 0.01), and urge to eat ratings (P = 0.05) but with higher ghrelin(AUC) (P = 0.008). These results suggest the satiating effect of a low-glycemic load meal is not directly linked to enhanced postprandial suppression of ghrelin. Notably, these effects were significant among white but not black women, suggesting that black women may be less sensitive than white women to the glucoregulatory effects of a low-glycemic load. These findings add to a growing literature demonstrating racial differences in postprandial appetite hormone responses. If reproducible, these findings have implications for individualized diet prescription for the purposes of glucose or weight control in women.

The effects of two workplace weight management programs and weight loss on health care utilization and costs

PubMed Central

Østbye, Truls; Stroo, Marissa; Eisenstein, Eric L.; Dement, John M.

2015-01-01

Objectives Compare the impact of two worksite weight management programs, WM (education) and WM+ (education plus counseling), on health care utilization and costs. Secondarily, compare the intervention groups to an observational control group of obese workers. Finally, evaluate the impact of actual weight loss on these outcomes. Methods Estimate the change in the WM and WM+ intervention groups. Using propensity score adjustment compare the two intervention groups with the observational control group; and compare those who lost weight with those who did not. Results No significant differences between the two intervention groups, or between these intervention groups and the observational control group. Those who lost weight reduced their overall health care costs. Conclusion To achieve weight loss and associated morbidity reductions, more extensive and intensive interventions, with more attention to motivation and compliance, are required. PMID:26849260

Glycemic load effect on fasting and post-prandial serum glucose, insulin, IGF-1 and IGFBP-3 in a randomized, controlled feeding study

PubMed Central

Runchey, Shauna S.; Pollak, Michael N.; Valsta, Liisa M.; Coronado, Gloria D.; Schwarz, Yvonne; Breymeyer, Kara L.; Wang, Chiachi; Wang, Ching-Yun; Lampe, Johanna W.; Neuhouser, Marian L.

2012-01-01

Background/Objectives The effect of a low glycemic load (GL) diet on insulin-like growth factor-1 (IGF-1) concentration is still unknown but may contribute to lower chronic disease risk. We aimed to assess the impact of GL on concentrations of IGF-1 and IGFBP-3. Subjects/Methods We conducted a randomized, controlled crossover feeding trial in 84 overweight-obese and normal weight healthy individuals using two 28-day weight-maintaining high- and low-GL diets. Measures were fasting and post-prandial concentrations of insulin, glucose, IGF-1 and IGFBP-3. 20 participants completed post-prandial testing by consuming a test breakfast at the end of each feeding period. We used paired t-tests for diet-component and linear mixed models for biomarker analyses. Results The 28-day low-GL diet led to 4% lower fasting concentrations of IGF-1 (10.6 ng/mL, p=0.04) and a 4% lower ratio of IGF-1/IGFBP-3 (0.24, p=0.01) compared to the high-GL diet. The low-GL test breakfast led to 43% and 27% lower mean post-prandial glucose and insulin responses, respectively; mean incremental areas under the curve for glucose and insulin, respectively, were 64.3±21.8 (mmol/L/240min) (p<0.01) and 2253±539 (μU/mL/240min) (p<0.01) lower following the low- compared to the high-GL test meal. There was no effect of GL on mean HOMA-IR or on mean integrated post-prandial concentrations of glucose-adjusted insulin, IGF-1 or IGFBP-3. We did not observe modification of the dietary effect by adiposity. Conclusions Low-GL diets resulted in 43% and 27% lower post-prandial responses of glucose and insulin, respectively, and modestly lower fasting IGF-1 concentrations. Further intervention studies are needed to weigh the impact of dietary GL on risk for chronic disease. PMID:22892437

Impact of Weight-Related Discrimination, Body Dissatisfaction and Self-Stigma on the Desire to Weigh Less.

PubMed

Jung, Franziska; Spahlholz, Jenny; Hilbert, Anja; Riedel-Heller, Steffi G; Luck-Sikorski, Claudia

2017-01-01

Currently, health care professionals plead for stabilization of weight and improving health conditions rather than focusing on weight loss only. Individuals with obesity have been shown to report weight loss goals that are much higher than what has been suggested by guidelines. The aim was to determine whether weight discrimination and body dissatisfaction have an impact on how much weight an individual with obesity wants to lose. In this representative telephone survey, 878 participants with obesity were asked about their experiences with weight stigma, their body image concerns, and about the amount of weight they would like to weigh using random digital dialing and Kish selection grid to ensure random selection of participants. Regression analysis reveals that being female, having a higher BMI, being younger, and trying to lose weight was related to a greater discrepancy between current weight and desired weight. The discrepancy between current weight and desired weight was greater when participants reported discrimination due to their weight as well as internalized stigma and body image concerns. Independent on the weight loss method, treating obesity should include realistic weight loss goals without being affected by social pressure or weight stigma, especially since stigma can result in further weight gain and decline health issues related to obesity and overweight. © 2017 The Author(s) Published by S. Karger GmbH, Freiburg.

Chemical and engineering properties of fired bricks containing 50 weight percent of class F fly ash

USGS Publications Warehouse

Chou, I.-Ming; Patel, V.; Laird, C.J.; Ho, K.K.

2001-01-01

The generation of fly ash during coal combustion represents a considerable solid waste disposal problem in the state of Illinois and nationwide. In fact, the majority of the three million tons of fly ash produced from burning Illinois bituminous coals is disposed of in landfills. The purpose of this study was to obtain a preliminary assessment of the technical feasibility of mitigating this solid waste problem by making fired bricks with the large volume of fly ash generated from burning Illinois coals. Test bricks were produced by the extrusion method with increasing amounts (20-50% by weight) of fly ash as a replacement for conventional raw materials. The chemical characteristics and engineering properties of the test bricks produced with and without 50 wt% of fly ash substitutions were analyzed and compared. The properties of the test bricks containing fly ash were at least comparable to, if not better than, those of standard test bricks made without fly ash and met the commercial specifications for fired bricks. The positive results of this study suggest that further study on test bricks with fly ash substitutions of greater than 50wt% is warranted. Successful results could have an important impact in reducing the waste disposal problem related to class F fly ash while providing the brick industry with a new low cost raw material. Copyright ?? 2001 Taylor & Francis.

Impact of Professional Nursing Practices on Patient/Nurse Outcomes: Testing the Essential Professional Nursing Practices Instrument.

PubMed

Kramer, Marlene; Brewer, Barbara B; Halfer, Diana; Hnatiuk, Cynthia Nowicki; MacPhee, Maura; Duchscher, Judy Boychuk; Maguire, Pat; Coe, Thomas; Schmalenberg, Claudia

2017-05-01

Increasing patient and healthcare system complexity and the need to accurately measure the engagement of clinical nurses (CNs) in holistic, professional nursing practice indicates that an update to the Essentials of Magnetism instrument is needed. The purposes of this research were to critique and weight items, assess the value and psychometric properties of the newly constructed Essential Professional Nursing Practices (EPNP) instrument, and establish relationships between EPNPs and CN job, practice, and nurse-assessed patient satisfaction.

High temperature polyimide foams for shuttle upper surface thermal insulation

NASA Technical Reports Server (NTRS)

Ball, G. L., III; Leffingwell, J. W.; Salyer, I. O.; Werkmeister, D. W.

1974-01-01

Polyimide foams developed by Monsanto Company were examined for use as upper surface space shuttle thermal insulation. It was found that postcured polyimide foams having a density of 64 kg/cu m (4 lb/cu ft) had acceptable physical properties up to and exceeding 700 K (800 F). Physical tests included cyclic heating and cooling in vacuum, weight and dimensional stability, mechanical strength and impact resistance, acoustic loading and thermal conductivity. Molding and newly developed postcuring procedures were defined.

Compilation of 1988 Annual Reports of the Navy ELF (Extremely Low Frequency) Communications System Ecological Monitoring Program. Volume 2

DTIC Science & Technology

1989-08-01

i3, 112-119. SW~right, R.T. & Coffin, R.B. 1984. Measuring microzopl , ’-., grazing on planktonic marine bacteria bv its impact on bacteria...activities are 3 shown for 1987 in Figure 4, along with antenna on and off times. Testing of the antenna was conducted on a 33% time rotation schedule...noticed that different observers differ slightly in their techniques for measuring 3 weights and body parts. Therefore we had all observers rotate among

Weight Status Misperception as Related to Selected Health Risk Behaviors among Middle School Students

ERIC Educational Resources Information Center

Martin, Brian C.; Dalton, William T., III; Williams, Stacey L.; Slawson, Deborah L.; Dunn, Michael S.; Johns-Wommack, Rebecca

2014-01-01

Background: Weight misperception has been documented among children although the impact on health risk behaviors is less understood, particularly among middle school students. The goals of this study were to describe sociodemographic differences in actual and perceived weight, correspondence between actual and perceived weight, and weight-related…

The Role of Resistance Exercise in Weight Loss.

ERIC Educational Resources Information Center

Alexander, Jeffrey L.

2002-01-01

Explains the role of weight training in weight loss, noting how weight training contributes to the creation of a negative energy balance and explaining how resistance exercise can cause an increase in fat oxidation, both acutely and chronically. Resistance exercise has an indirect impact on weight and fat loss through increasing resting metabolic…

Comparison of weight loss by weight classification in a commercial, community-based weight loss program

USDA-ARS?s Scientific Manuscript database

The objective of our study was to determine the impact of grade of obesity on weight-loss outcomes of a community-based, intensive behavioral counseling program (Weight Watchers Points-Plus). Previous studies have shown that individuals with a higher body mass index (BMI) at the beginning of treatme...

The Impact of Weight Perception on the Health Behaviors of College Students

ERIC Educational Resources Information Center

Osborn, Jessica; Naquin, Mildred; Gillan, Wynn; Bowers, Ashley

2016-01-01

Background: Obesity has links to numerous health problems. Having an accurate perception of one's own weight is an important aspect of maintaining an appropriate weight. Purpose: The purpose of this study was to examine relationships among perceived body weight, actual body weight, body satisfaction, and selected health behaviors. Methods: The…

Impact of carbohydrates on weight regain.

PubMed

Bosy-Westphal, Anja; Müller, Manfred J

2015-07-01

Research on obesity treatment has shifted its focus from weight loss to weight-loss maintenance strategies. The conventional approach of a low-fat diet is challenged by insights from glycemic effects of carbohydrates on body weight regulation. Metabolic and endocrine adaptations to weight loss that contribute to weight regain involve reduced energy expenditure, increased insulin sensitivity, and enhanced orexigenic signals. This review summarizes the impact of carbohydrates on energetic efficiency, partitioning of weight regain as fat and lean mass, and appetite control. Both the amount and frequency of postprandial glycemia add to body weight regulation after weight loss and strengthen the concept of glycemic index and glycemic load. In addition, dietary fiber and slowly or poorly absorbable functional sugars modify gastrointestinal peptides involved in appetite and metabolic regulation and exert prebiotic effects. Current evidence suggests that a low-glycemic load diet with a preference for low-glycemic index foods and integration of slowly digestible, poorly absorbable carbohydrates may improve weight-loss maintenance. Future studies should investigate the health benefits of low glycemic functional sweeteners (e.g., isomaltulose and tagatose).

Damage tolerance of a composite sandwich with interleaved foam core

NASA Astrophysics Data System (ADS)

Ishai, Ori; Hiel, Clement

A composite sandwich panel consisting of carbon fiber-reinforced plastic (CFRP) skins and a syntactic foam core was selected as an appropriate structural concept for the design of wind tunnel compressor blades. Interleaving of the core with tough interlayers was done to prevent core cracking and to improve damage tolerance of the sandwich. Simply supported sandwich beam specimens were subjected to low-velocity drop-weight impacts as well as high velocity ballistic impacts. The performance of the interleaved core sandwich panels was characterized by localized skin damage and minor cracking of the core. Residual compressive strength (RCS) of the skin, which was derived from flexural test, shows the expected trend of decreasing with increasing size of the damage, impact energy, and velocity. In the case of skin damage, RCS values of around 50 percent of the virgin interleaved reference were obtained at the upper impact energy range. Based on the similarity between low-velocity and ballistic-impact effects, it was concluded that impact energy is the main variable controlling damage and residual strength, where as velocity plays a minor role.

Damage tolerance of a composite sandwich with interleaved foam core

NASA Technical Reports Server (NTRS)

Ishai, Ori; Hiel, Clement

1992-01-01

A composite sandwich panel consisting of carbon fiber-reinforced plastic (CFRP) skins and a syntactic foam core was selected as an appropriate structural concept for the design of wind tunnel compressor blades. Interleaving of the core with tough interlayers was done to prevent core cracking and to improve damage tolerance of the sandwich. Simply supported sandwich beam specimens were subjected to low-velocity drop-weight impacts as well as high velocity ballistic impacts. The performance of the interleaved core sandwich panels was characterized by localized skin damage and minor cracking of the core. Residual compressive strength (RCS) of the skin, which was derived from flexural test, shows the expected trend of decreasing with increasing size of the damage, impact energy, and velocity. In the case of skin damage, RCS values of around 50 percent of the virgin interleaved reference were obtained at the upper impact energy range. Based on the similarity between low-velocity and ballistic-impact effects, it was concluded that impact energy is the main variable controlling damage and residual strength, where as velocity plays a minor role.

A Compliant Four-bar Linkage Mechanism that Makes the Fingers of a Prosthetic Hand More Impact Resistant

PubMed Central

Choi, Kyung Yun; Akhtar, Aadeel; Bretl, Timothy

2017-01-01

Repeated mechanical failure due to accidental impact is one of the main reasons why people with upper-limb amputations abandon commercially-available prosthetic hands. To address this problem, we present the design and evaluation of a compliant four-bar linkage mechanism that makes the fingers of a prosthetic hand more impact resistant. Our design replaces both the rigid input and coupler links with a monolithic compliant bone, and replaces the follower link with three layers of pre-stressed spring steel. This design behaves like a conventional four-bar linkage but adds lateral compliance and eliminates a pin joint, which is a main site of failure on impact. Results from free-end and fixed-end impact tests show that, compared to those made with a conventional four-bar linkage, fingers made with our design absorb up to 11% more energy on impact with no mechanical failure. We also show the integration of these fingers in a prosthetic hand that is low-cost, light-weight, and easy to assemble, and that has grasping performance comparable to commercially-available hands. PMID:29527386

Assessing Weight-Related Quality of Life in Adolescents

PubMed Central

Kolotkin, Ronette L.; Zeller, Meg; Modi, Avani C.; Samsa, Gregory P.; Quinlan, Nicole Polanichka; Yanovski, Jack A.; Bell, Stephen K.; Maahs, David M.; de Serna, Daniela Gonzales; Roehrig, Helmut R.

2008-01-01

Objective The development of a new weight-related measure to assess quality of life in adolescents [Impact of Weight on Quality of Life (IWQOL)-Kids] is described. Research Methods and Procedures Using a literature search, clinical experience, and consultation with pediatric clinicians, 73 items were developed, pilot tested, and administered to 642 participants, 11 to 19 years old, recruited from weight loss programs/studies and community samples (mean z-BMI, 1.5; range, –1.2 to 3.4; mean age, 14.0; 60% female; 56% white). Participants completed the 73 items and the Pediatric Quality of Life Inventory and were weighed and measured. Results Four factors (27 items) were identified (physical comfort, body esteem, social life, and family relations), accounting for 71% of the variance. The IWQOL-Kids demonstrated excellent psychometric properties. Internal consistency coefficients ranged from 0.88 to 0.95 for scales and equaled 0.96 for total score. Convergent validity was demonstrated with strong correlations between IWQOL-Kids total score and the Pediatric Quality of Life Inventory (r = 0.76, p < 0.0001). Significant differences were found across BMI groups and between clinical and community samples, supporting the sensitivity of this measure. Participants in a weight loss camp demonstrated improved IWQOL-Kids scores, suggesting responsiveness of the IWQOL-Kids to weight loss/social support intervention. Discussion The present study provides preliminary evidence regarding the psychometric properties of the IWQOL-Kids, a weight-related quality of life measure for adolescents. Given the rise of obesity in youth, the development of a reliable and valid weight-related measure of quality of life is timely. PMID:16648616

Dietary mannitol increased the absorption of calcium and magnesium in rats.

PubMed

Xiao, J; Sakaguchi, E; Min, X; Kawasaki, K

2016-08-01

The effect of mannitol on bone-related mineral absorption and retention and the mechanism was investigated in this study. Fourteen 8-week-old male Wistar rats in experiment 1 and same number and age cecectomized Wistar male rats in experiment 2 were divided into two subgroups of seven animals, respectively, fed diets containing 0 or 4% mannitol for 28 days. Mineral balance tests were determined twice during days 8-12 and days 22-26, and the rats were slaughtered on day 28 both in experiment 1 and experiment 2. The whole caecum and colon were collected with the content to analyse tissue weight, content weight, content's pH and moisture, organic acids' concentration and mineral levels. In experiment 1, Ca absorption and retention and Mg absorption were significantly increased by mannitol feeding during days 8-12. Caecal total weight, tissue weight and content weight were increased, the pH of caecum and colon was reduced, and the concentrations of caecal short-chain fatty acids (SCFAs) were modified by mannitol feeding. In experiment 2, during days 8-12 and days 22-26, Ca absorption and retention were significantly lowered by mannitol feeding in cecectomized rats; however, mannitol feeding decreased Mg absorption during days 8-12, but did not impact Mg retention. Colonic total weight, tissue weight and content weight were significantly increased, and colonic pH was reduced by mannitol feeding. In conclusion, dietary mannitol increased the absorption of Ca and Mg and the caecum markedly contributed to this promoting effect of mannitol. Journal of Animal Physiology and Animal Nutrition © 2016 Blackwell Verlag GmbH.

Effect of an intensive nutrition intervention of a high protein and low glycemic-index diet on weight of kidney transplant recipients: study protocol for a randomized clinical trial.

PubMed

Pedrollo, Elis Forcellini; Nicoletto, Bruna Bellincanta; Carpes, Larissa Salomoni; de Freitas, Júlia de Melo Cardoso; Buboltz, Julia Roberta; Forte, Cristina Carra; Bauer, Andrea Carla; Manfro, Roberto Ceratti; Souza, Gabriela Corrêa; Leitão, Cristiane Bauermann

2017-09-06

Excessive weight gain is commonly observed within the first year after kidney transplantation and is associated with negative outcomes, such as graft loss and cardiovascular events. The purpose of this study is to evaluate the effect of a high protein and low glycemic-index diet on preventing weight gain after kidney transplantation. We designed a prospective, single-center, open-label, randomized controlled study to compare the efficacy of a high protein (1.3-1.4 g/kg/day) and low-glycemic index diet versus a conventional diet (0.8-1.0 g/kg/day of protein) on preventing weight gain after kidney transplantation. A total of 120 eligible patients 2 months after transplantation will be recruited. Patients with an estimated glomerular filtration rate through the modification of diet of renal disease (MDRD) formula < 30 mL/min/1.73 m 2 or urinary albumin excretion > 300 mg/24 h will be excluded. Patients' diets will be allocated through simple sequential randomization. Patients will be followed-up for 12 months with nine clinic appointments with a dietitian and the evaluations will include nutritional assessment (anthropometrics, body composition, and resting metabolic rate) and laboratory tests. The primary outcome is weight maintenance or body weight gain under 5% after 12 months. Secondary outcomes include body composition, resting metabolic rate, satiety sensation, kidney function, and other metabolic parameters. Diets with higher protein content and lower glycemic index may lead to weight loss because of higher satiety sensation. However, there is a concern about the association of high protein intake and kidney damage. Nevertheless, there is little evidence on the impact of high protein intake on long-term kidney function outcome. Therefore, we designed a study to test if a high protein diet with low-glycemic index will be an effective and safe nutritional intervention to prevent weight gain in kidney transplant patients. ClinicalTrials.gov identifier, NCT02883777 . Registered on 3 August 2016.

Correlation of rolling condition, microstructure, and low-temperature toughness of X70 pipeline steels

NASA Astrophysics Data System (ADS)

Hwang, Byoungchul; Kim, Young Min; Lee, Sunghak; Kim, Nack J.; Yoo, Jang Yong

2005-07-01

Correlation of rolling conditions, microstructure, and low-temperature toughness of high-toughness X70 pipeline steels was investigated in this study. Twelve kinds of steel specimens were fabricated by vacuum-induction melting and hot rolling, and their microstructures were varied by rolling conditions. Charpy V-notch (CVN) impact test and drop-weight tear test (DWTT) were conducted on the rolled steel specimens in order to analyze low-temperature fracture properties. Charpy impact test results indicated that the energy transition temperature (ETT) was below -100 °C when the finish cooling temperature range was 350 °C to 500 °C, showing excellent low-temperature toughness. The ETT increased because of the formation of bainitic ferrite and martensite at low finish cooling temperatures and because of the increase in effective grain size due to the formation of coarse ferrites at high finish cooling temperatures. Most of the specimens also showed excellent DWTT properties as the percent shear area well exceeded 85 pct, irrespective of finish rolling temperatures or finish cooling temperatures, although a large amount of inverse fracture occurred at some finish cooling temperatures.

Weighing up the weighted case mix tool (WCMT): a psychometric investigation using confirmatory factor analysis.

PubMed

Duane, B G; Humphris, G; Richards, D; Okeefe, E J; Gordon, K; Freeman, R

2014-12-01

To assess the use of the WCMT in two Scottish health boards and to consider the impact of simplifying the tool to improve efficient use. A retrospective analysis of routine WCMT data (47,276 cases). Public Dental Service (PDS) within NHS Lothian and Highland. The WCMT consists of six criteria. Each criterion is measured independently on a four-point scale to assess patient complexity and the dental care for the disabled/impaired patient. Psychometric analyses on the data-set were conducted. Conventional internal consistency coefficients were calculated. Latent variable modelling was performed to assess the 'fit' of the raw data to a pre-specified measurement model. A Confirmatory Factor Analysis (CFA) was used to test three potential changes to the existing WCMT that included, the removal of the oral risk factor question, the removal of original weightings for scoring the Tool, and collapsing the 4-point rating scale to three categories. The removal of the oral risk factor question had little impact on the reliability of the proposed simplified CMT to discriminate between levels of patient complexity. The removal of weighting and collapsing each item's rating scale to three categories had limited impact on reliability of the revised tool. The CFA analysis provided strong evidence that a new, proposed simplified Case Mix Tool (sCMT) would operate closely to the pre-specified measurement model (the WMCT). A modified sCMT can demonstrate, without reducing reliability, a useful measure of the complexity of patient care. The proposed sCMT may be implemented within primary care dentistry to record patient complexity as part of an oral health assessment.

Ocean acidification and calcifying reef organisms: A mesocosm investigation

USGS Publications Warehouse

Jokiel, P.L.; Rodgers, K.S.; Kuffner, I.B.; Andersson, A.J.; Cox, E.F.; MacKenzie, F.T.

2008-01-01

A long-term (10 months) controlled experiment was conducted to test the impact of increased partial pressure of carbon dioxide (pCO2) on common calcifying coral reef organisms. The experiment was conducted in replicate continuous flow coral reef mesocosms flushed with unfiltered sea water from Kaneohe Bay, Oahu, Hawaii. Mesocosms were located in full sunlight and experienced diurnal and seasonal fluctuations in temperature and sea water chemistry characteristic of the adjacent reef flat. Treatment mesocosms were manipulated to simulate an increase in pCO2 to levels expected in this century [midday pCO2 levels exceeding control mesocosms by 365 ?? 130 ??atm (mean ?? sd)]. Acidification had a profound impact on the development and growth of crustose coralline algae (CCA) populations. During the experiment, CCA developed 25% cover in the control mesocosms and only 4% in the acidified mesocosms, representing an 86% relative reduction. Free-living associations of CCA known as rhodoliths living in the control mesocosms grew at a rate of 0.6 g buoyant weight year-1 while those in the acidified experimental treatment decreased in weight at a rate of 0.9 g buoyant weight year-1, representing a 250% difference. CCA play an important role in the growth and stabilization of carbonate reefs, so future changes of this magnitude could greatly impact coral reefs throughout the world. Coral calcification decreased between 15% and 20% under acidified conditions. Linear extension decreased by 14% under acidified conditions in one experiment. Larvae of the coral Pocillopora damicornis were able to recruit under the acidified conditions. In addition, there was no significant difference in production of gametes by the coral Montipora capitata after 6 months of exposure to the treatments. ?? 2008 Springer-Verlag.

Ocean acidification and calcifying reef organisms: a mesocosm investigation

NASA Astrophysics Data System (ADS)

Jokiel, P. L.; Rodgers, K. S.; Kuffner, I. B.; Andersson, A. J.; Cox, E. F.; MacKenzie, F. T.

2008-09-01

A long-term (10 months) controlled experiment was conducted to test the impact of increased partial pressure of carbon dioxide ( pCO2) on common calcifying coral reef organisms. The experiment was conducted in replicate continuous flow coral reef mesocosms flushed with unfiltered sea water from Kaneohe Bay, Oahu, Hawaii. Mesocosms were located in full sunlight and experienced diurnal and seasonal fluctuations in temperature and sea water chemistry characteristic of the adjacent reef flat. Treatment mesocosms were manipulated to simulate an increase in pCO2 to levels expected in this century [midday pCO2 levels exceeding control mesocosms by 365 ± 130 μatm (mean ± sd)]. Acidification had a profound impact on the development and growth of crustose coralline algae (CCA) populations. During the experiment, CCA developed 25% cover in the control mesocosms and only 4% in the acidified mesocosms, representing an 86% relative reduction. Free-living associations of CCA known as rhodoliths living in the control mesocosms grew at a rate of 0.6 g buoyant weight year-1 while those in the acidified experimental treatment decreased in weight at a rate of 0.9 g buoyant weight year-1, representing a 250% difference. CCA play an important role in the growth and stabilization of carbonate reefs, so future changes of this magnitude could greatly impact coral reefs throughout the world. Coral calcification decreased between 15% and 20% under acidified conditions. Linear extension decreased by 14% under acidified conditions in one experiment. Larvae of the coral Pocillopora damicornis were able to recruit under the acidified conditions. In addition, there was no significant difference in production of gametes by the coral Montipora capitata after 6 months of exposure to the treatments.

The Weighting Is The Hardest Part: On The Behavior of the Likelihood Ratio Test and the Score Test Under a Data-Driven Weighting Scheme in Sequenced Samples

PubMed Central

Minică, Camelia C.; Genovese, Giulio; Hultman, Christina M.; Pool, René; Vink, Jacqueline M.; Neale, Michael C.; Dolan, Conor V.; Neale, Benjamin M.

2017-01-01

Sequence-based association studies are at a critical inflexion point with the increasing availability of exome-sequencing data. A popular test of association is the sequence kernel association test (SKAT). Weights are embedded within SKAT to reflect the hypothesized contribution of the variants to the trait variance. Because the true weights are generally unknown, and so are subject to misspecification, we examined the efficiency of a data-driven weighting scheme. We propose the use of a set of theoretically defensible weighting schemes, of which, we assume, the one that gives the largest test statistic is likely to capture best the allele frequency-functional effect relationship. We show that the use of alternative weights obviates the need to impose arbitrary frequency thresholds in sequence data association analyses. As both the score test and the likelihood ratio test (LRT) may be used in this context, and may differ in power, we characterize the behavior of both tests. We found that the two tests have equal power if the set of weights resembled the correct ones. However, if the weights are badly specified, the LRT shows superior power (due to its robustness to misspecification). With this data-driven weighting procedure the LRT detected significant signal in genes located in regions already confirmed as associated with schizophrenia – the PRRC2A (P=1.020E-06) and the VARS2 (P=2.383E-06) – in the Swedish schizophrenia case-control cohort of 11,040 individuals with exome-sequencing data. The score test is currently preferred for its computational efficiency and power. Indeed, assuming correct specification, in some circumstances the score test is the most powerful. However, LRT has the advantageous properties of being generally more robust and more powerful under weight misspecification. This is an important result given that, arguably, misspecified models are likely to be the rule rather than the exception in weighting-based approaches. PMID:28238293

Weight loss of endodontic sealers, cements and pastes in water.

PubMed

Orstavik, D

1983-08-01

A solubility test based on weight loss in water, as proposed for standard testing programs (ADA & ISO), was adapted for assessing the solubility of 10 root canal sealers, cements and pastes. The weight loss of the set materials during 24 hr in distilled water at 37 degrees C ranged from -0.84 (AH26) to 22.71 (Kloroperka N-O) weight per cent. The results were reproducible, and the test was considered suitable for routine testing of weight loss in water of endodontic materials. However, the test may not provide information which is directly related to the clinical behavior of the materials.

Full-Scale Test and Analysis of a PRSEUS Fuselage Panel to Assess Damage-Containment Features

NASA Technical Reports Server (NTRS)

Bergan, Andrew; Bakuckas, John G.; Lovejoy, Andrew E.; Jegley, Dawn C.; Linton, Kim A.; Korkosz, Gregory; Awerbuch, Jonathan; Tan, Tein-Min

2011-01-01

Stitched composite technology has the potential to substantially decrease structural weight through enhanced damage containment capabilities. The most recent generation of stitched composite technology, the Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) concept, has been shown to successfully arrest damage at the sub-component level through tension testing of a three stringer panel with damage in the form of a two-bay notch. In a joint effort undertaken by the National Aeronautics and Space Administration (NASA), the Federal Aviation Administration (FAA), and the Boeing Company, further studies are being conducted to characterize the damage containment features of the PRSEUS concept. A full-scale residual strength test will be performed on a fuselage panel to determine if the load capacity will meet strength, deformation, and damage tolerance requirements. A curved panel was designed, fabricated, and prepared for residual strength testing. A pre-test Finite Element Model (FEM) was developed using design allowables from previous test programs to predict test panel deformation characteristics and margins of safety. Three phases of testing with increasing damage severity include: (1) as manufactured; (2) barely visible impact damage (BVID) and visible impact damage (VID); and (3) discrete source damage (DSD) where the panel will be loaded to catastrophic failure. This paper presents the background information, test plan, and experimental procedure. This paper is the first of several future articles reporting the test preparations, results, and analysis conducted in the test program.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ji, Changyoon, E-mail: changyoon@yonsei.ac.kr; Hong, Taehoon, E-mail: hong7@yonsei.ac.kr

Previous studies have proposed several methods for integrating characterized environmental impacts as a single index in life cycle assessment. Each of them, however, may lead to different results. This study presents internal and external normalization methods, weighting factors proposed by panel methods, and a monetary valuation based on an endpoint life cycle impact assessment method as the integration methods. Furthermore, this study investigates the differences among the integration methods and identifies the causes of the differences through a case study in which five elementary school buildings were used. As a result, when using internal normalization with weighting factors, the weightingmore » factors had a significant influence on the total environmental impacts whereas the normalization had little influence on the total environmental impacts. When using external normalization with weighting factors, the normalization had more significant influence on the total environmental impacts than weighing factors. Due to such differences, the ranking of the five buildings varied depending on the integration methods. The ranking calculated by the monetary valuation method was significantly different from that calculated by the normalization and weighting process. The results aid decision makers in understanding the differences among these integration methods, and, finally, help them select the method most appropriate for the goal at hand.« less

Superior Ballistic Impact Resistance Achieved by the Co-Base Alloy Haynes 25

NASA Technical Reports Server (NTRS)

Hebsur, Mohan G.; Noebe, Ronald D.; Revilock, Duane M.

2003-01-01

The fan case in a jet engine is required to contain a fan blade in the rare event of a blade loss during operation. Because of its function, the fan case is the largest structural component in high-bypass-ratio turbofan engines used in commercial aircraft. Therefore, the use of lighter and stronger materials would be advantageous in most engines and is practically a necessity in the latest generation of high-bypass engines. Small panels, 7 in. wide by 7 in. long, of a number of metallic alloys were impact tested at room temperature with a 0.50-caliber blunt-nose titanium alloy projectile at the NASA Glenn Research Center (ref. 1). These metallic systems included several high-strength aluminum (Al) alloys, Al-based laminates, aluminum metal matrix composites (Al-MMCs), nickel-base superalloys (Inconel 718 and 625), several titanium (Ti) alloys in different heat treated conditions, 304L stainless steel, a stainless-steel-based laminate, and a high strength steel (Nitronic 60). It was determined that a simple Co-base alloy (Haynes 25) had the best impact resistance on an areal weight basis. Haynes 25 was at least 10 percent better than IMI 550, the best titanium alloy tested to date, and it was far superior to other metals, especially at higher impact velocities (greater than 1100 ft/sec). Because this material could be ideal for fan containment applications in supersonic aircraft as a replacement for titanium, impact tests were also conducted at 371 oC and compared with results from alloys tested at elevated temperature under previous programs (i.e., Inconel 718, Ti-6242, M-152, Timetal 21S, and Aeromet 100). Although cobalt-base alloys are used in some high-temperature engine applications, to our knowledge they are not used in any containment systems. Advantages of cobalt over titanium include lower cost, easier processing, better high-temperature strength, and no fire hazard if tip rub occurs. Future plans include testing of lightweight sandwich panels with Haynes 25 as a core material in the form of a foam or lattice block structure and scaling up the current tests by using blade-simulating projectiles impacting large plates and half rings.

Fuel containment, lightning protection and damage tolerance in large composite primary aircraft structures

NASA Technical Reports Server (NTRS)

Griffin, Charles F.; James, Arthur M.

1985-01-01

The damage-tolerance characteristics of high strain-to-failure graphite fibers and toughened resins were evaluated. Test results show that conventional fuel tank sealing techniques are applicable to composite structures. Techniques were developed to prevent fuel leaks due to low-energy impact damage. For wing panels subjected to swept stroke lightning strikes, a surface protection of graphite/aluminum wire fabric and a fastener treatment proved effective in eliminating internal sparking and reducing structural damage. The technology features developed were incorporated and demonstrated in a test panel designed to meet the strength, stiffness, and damage tolerance requirements of a large commercial transport aircraft. The panel test results exceeded design requirements for all test conditions. Wing surfaces constructed with composites offer large weight savings if design allowable strains for compression can be increased from current levels.

A cluster randomised trial testing an intervention to improve parents' recognition of their child's weight status: study protocol.

PubMed

Parkinson, Kathryn N; Jones, Angela R; Tovee, Martin J; Ells, Louisa J; Pearce, Mark S; Araujo-Soares, Vera; Adamson, Ashley J

2015-06-12

Parents typically do not recognise their child's weight status accurately according to clinical criteria, and thus may not take appropriate action if their child is overweight. We developed a novel visual intervention designed to improve parental perceptions of child weight status according to clinical criteria for children aged 4-5 and 10-11 years. The Map Me intervention comprises age- and sex-specific body image scales of known body mass index and supporting information about the health risks of childhood overweight. This cluster randomised trial will test the effectiveness of the Map Me intervention. Primary schools will be randomised to: paper-based Map Me; web-based Map Me; no information (control). Parents of reception (4-5 years) and year 6 (10-11 years) children attending the schools will be recruited. The study will work with the National Child Measurement Programme which measures the height and weight of these year groups and provides feedback to parents about their child's weight status. Before receiving the feedback, parents will complete a questionnaire which includes assessment of their perception of their child's weight status and knowledge of the health consequences of childhood overweight. The control group will provide pre-intervention data with assessment soon after recruitment; the intervention groups will provide post-intervention data after access to Map Me for one month. The study will subsequently obtain the child height and weight measurements from the National Child Measurement Programme. Families will be followed-up by the study team at 12 months. The primary outcome is any difference in accuracy in parental perception of child weight status between pre-intervention and post-intervention at one month. The secondary outcomes include differences in parent knowledge, intention to change lifestyle behaviours and/or seek advice or support, perceived control, action planning, coping planning, and child weight status at 12 month follow-up. The Map Me tool has potential to make a positive impact on children's health at a population level by introducing it into current intervention programmes to improve accuracy of parental perception of child's weight status. This trial will inform the action of researchers, educators, health professionals and policy makers. Current Controlled Trials ISRCTN91136472. Registered 3 May 2013.

The Impact of Acculturation Level on Weight Status and Weight Outcomes in Hispanic Children.

PubMed

Moreno, Jennette P; Vaughan, Elizabeth; Hernandez, Daphne; Cameron, Ryan T; Foreyt, John P; Johnston, Craig A

2016-12-01

Previous studies revealed that higher levels of acculturation are related to obesity in Hispanic adults. Conflicting findings exist regarding this relationship in children, and little is known about the impact of acculturation on children's success in pediatric weight management programs. The purposes of the study were to (1) examine the relationship between acculturation and overweight/obese weight status and (2) determine the impact of acculturation on the changes in weight status among overweight/obese children 12 and 24 months after having participated in a weight management intervention. This is a secondary analysis of aggregated data from three randomized control trials that occurred between 2005 and 2009. Height, weight, and level of acculturation using the Child Short Scale for Hispanics (C-SASH) were measured in a sample of Hispanic children (n = 559). Logistic regression models were used to study phase 1 (n = 559) and phase 2 (n = 142), controlling for child and family characteristics. Children reporting high levels of acculturation had a 52 % lower odds of being overweight or obese. Among overweight/obese children who participated in the intervention, high levels of acculturation demonstrated greater reductions in standardized body mass index (zBMI) at 24 months. The results of this study indicate a need to tailor weight management programs for Hispanic children who have lower levels of acculturation.

Forces associated with launch into space do not impact bone fracture healing.

PubMed

Childress, Paul; Brinker, Alexander; Gong, Cynthia-May S; Harris, Jonathan; Olivos, David J; Rytlewski, Jeffrey D; Scofield, David C; Choi, Sungshin Y; Shirazi-Fard, Yasaman; McKinley, Todd O; Chu, Tien-Min G; Conley, Carolynn L; Chakraborty, Nabarun; Hammamieh, Rasha; Kacena, Melissa A

2018-02-01

Segmental bone defects (SBDs) secondary to trauma invariably result in a prolonged recovery with an extended period of limited weight bearing on the affected limb. Soldiers sustaining blast injuries and civilians sustaining high energy trauma typify such a clinical scenario. These patients frequently sustain composite injuries with SBDs in concert with extensive soft tissue damage. For soft tissue injury resolution and skeletal reconstruction a patient may experience limited weight bearing for upwards of 6 months. Many small animal investigations have evaluated interventions for SBDs. While providing foundational information regarding the treatment of bone defects, these models do not simulate limited weight bearing conditions after injury. For example, mice ambulate immediately following anesthetic recovery, and in most cases are normally ambulating within 1-3 days post-surgery. Thus, investigations that combine disuse with bone healing may better test novel bone healing strategies. To remove weight bearing, we have designed a SBD rodent healing study in microgravity (µG) on the International Space Station (ISS) for the Rodent Research-4 (RR-4) Mission, which launched February 19, 2017 on SpaceX CRS-10 (Commercial Resupply Services). In preparation for this mission, we conducted an end-to-end mission simulation consisting of surgical infliction of SBD followed by launch simulation and hindlimb unloading (HLU) studies. In brief, a 2 mm defect was created in the femur of 10 week-old C57BL6/J male mice (n = 9-10/group). Three days after surgery, 6 groups of mice were treated as follows: 1) Vivarium Control (maintained continuously in standard cages); 2) Launch Negative Control (placed in the same spaceflight-like hardware as the Launch Positive Control group but were not subjected to launch simulation conditions); 3) Launch Positive Control (placed in spaceflight-like hardware and also subjected to vibration followed by centrifugation); 4) Launch Positive Experimental (identical to Launch Positive Control group, but placed in qualified spaceflight hardware); 5) Hindlimb Unloaded (HLU, were subjected to HLU immediately after launch simulation tests to simulate unloading in spaceflight); and 6) HLU Control (single housed in identical HLU cages but not suspended). Mice were euthanized 28 days after launch simulation and bone healing was examined via micro-Computed Tomography (µCT). These studies demonstrated that the mice post-surgery can tolerate launch conditions. Additionally, forces and vibrations associated with launch did not impact bone healing (p = .3). However, HLU resulted in a 52.5% reduction in total callus volume compared to HLU Controls (p = .0003). Taken together, these findings suggest that mice having a femoral SBD surgery tolerated the vibration and hypergravity associated with launch, and that launch simulation itself did not impact bone healing, but that the prolonged lack of weight bearing associated with HLU did impair bone healing. Based on these findings, we proceeded with testing the efficacy of FDA approved and novel SBD therapies using the unique spaceflight environment as a novel unloading model on SpaceX CRS-10. Copyright © 2017 The Committee on Space Research (COSPAR). All rights reserved.

The Impact of Quitting Smoking on Weight Among Women Prisoners Participating in a Smoking Cessation Intervention

PubMed Central

McClure, Leslie A.; Jackson, Dorothy O.; Villalobos, Gabrielle C.; Weaver, Michael F.; Stitzer, Maxine L.

2010-01-01

Objectives. We examined the impact of smoking cessation on weight change in a population of women prisoners. Methods. Women prisoners (n = 360) enrolled in a smoking cessation intervention; 250 received a 10-week group intervention plus transdermal nicotine replacement. Results. Women who quit smoking had significant weight gain at 3- and 6-month follow-ups, with a net difference of 10 pounds between smokers and abstainers at 6 months. By the 12-month follow-up, weight gain decreased among abstainers. Conclusions. We are the first, to our knowledge, to demonstrate weight gain associated with smoking cessation among women prisoners. Smoking cessation interventions that address postcessation weight gain as a preventative measure may be beneficial in improving health and reducing the high prevalence of smoking in prisoner populations. PMID:20558806

Effects of the Mediterranean Diet before and after Weight Loss on Eating Behavioral Traits in Men with Metabolic Syndrome.

PubMed

Carbonneau, Élise; Royer, Marie-Michelle; Richard, Caroline; Couture, Patrick; Desroches, Sophie; Lemieux, Simone; Lamarche, Benoît

2017-03-19

The objective of this study was to investigate the impact of the Mediterranean diet (MedDiet) consumed before and after weight loss on eating behavioral traits as measured by the Three-Factor Eating Questionnaire (TFEQ) in men with metabolic syndrome (MetS). In this fixed sequence study, 19 men with MetS (National Cholesterol Education Program-Adult Treatment Panel III (NCEP-ATPIII) criteria), aged between 24 and 62 years, first consumed a five-week standardized North American control diet followed by a five-week MedDiet, both under weight-maintaining controlled-feeding conditions. This was followed by a 20-week caloric restriction weight loss period in free-living conditions, without specific recommendations towards adhering to the principles of the MedDiet. Participants were finally subjected to a final five-week MedDiet phase under isoenergetic controlled-feeding conditions. The MedDiet before weight loss had no impact on eating behavioral traits. Body weight reduction by caloric restriction (-10.2% of initial weight) was associated with increased cognitive restraint ( p < 0.0001) and with reduced disinhibition ( p = 0.02) and susceptibility to hunger ( p = 0.01). Feeding the MedDiet for five weeks under isoenergetic conditions after the weight loss phase had no further impact on eating behavioral traits. Results of this controlled-feeding study suggest that consumption of the MedDiet per se has no effect on eating behavioral traits as measured by TFEQ, unless it is combined with significant weight loss.

Trauma of lung due to impact load.

PubMed

Yen, R T; Fung, Y C; Liu, S Q

1988-01-01

A quantitative evaluation of lung injury due to impact loading is of general interest. Hemorrhage and edema are the usual sequelae to traumatic pulmonary impact. To gain some quantitative understanding of the phenomena, we perfused excised rabbit lung with Macrodex at isogravimetric condition and monitored lung weight continuously after impact. It is shown that a factor of importance is the rigidity of the surface on which the lung rests. The rate of lung weight increase is smaller if the lung was 'freely' supported on a soft cloth, more if it was supported on a rigid plate. This suggests the influence of stress wave reflection. The critical condition correlates with the initial velocity of impact at the surface of the lung, or with the maximum deflection. For a freely supported lung, the rate of lung weight increase was 22% of the initial total lung weight per h after impact when the impact velocity was 11.5 ms-1, 30% when the velocity was 13.2 ms-1, several 100% at 13.5 ms-1, signaling massive lung injury. Since the velocity of sound in rabbit lung is 33.3 ms-1 when the inflation (transpulmonary) pressure is 10 cm H2O, the critical velocity of 13.5 ms-1 corresponds to a Mach number of 0.4. The maximum surface displacement of the lung is almost linearly proportional to the initial velocity of impact. The exact cause of edema and hemorrhage is unknown; we hypothesize that it is due to tensile stress in the alveolar wall caused by the impact.

Self-administered nicotine differentially impacts body weight gain in obesity-prone and obesity-resistant rats.

PubMed

Rupprecht, Laura E; Smith, Tracy T; Donny, Eric C; Sved, Alan F

2017-07-01

Obesity and tobacco smoking represent the largest challenges to public health, but the causal relationship between nicotine and obesity is poorly understood. Nicotine suppresses body weight gain, a factor impacting smoking initiation and the failure to quit, particularly among obese smokers. The impact of nicotine on body weight regulation in obesity-prone and obesity-resistant populations consuming densely caloric diets is unknown. In the current experiment, body weight gain of adult male rats maintained on a high energy diet (31.8% kcal from fat) distributed into obesity-prone (OP), obesity-resistant (OR) and an intermediate group, which was placed on standard rodent chow (Chow). These rats were surgically implanted with intravenous catheters and allowed to self-administer nicotine (0 or 60μg/kg/infusion, a standard self-administration dose) in 1-h sessions for 20 consecutive days. Self-administered nicotine significantly suppressed body weight gain but not food intake in OP and Chow rats. Self-administered nicotine had no effect on body weight gain in OR rats. These data suggest that: 1) OR rats are also resistant to nicotine-induced suppression of body weight gain; and 2) nicotine may reduce levels of obesity in a subset of smokers prone to obesity. Copyright © 2017 Elsevier Inc. All rights reserved.

Interpreting stress responses during routine toxicity studies: a review of the biology, impact, and assessment.

PubMed

Everds, Nancy E; Snyder, Paul W; Bailey, Keith L; Bolon, Brad; Creasy, Dianne M; Foley, George L; Rosol, Thomas J; Sellers, Teresa

2013-01-01

Stress often occurs during toxicity studies. The perception of sensory stimuli as stressful primarily results in catecholamine release and activation of the hypothalamic-pituitary-adrenal (HPA) axis to increase serum glucocorticoid concentrations. Downstream effects of these neuroendocrine signals may include decreased total body weights or body weight gain; food consumption and activity; altered organ weights (e.g., thymus, spleen, adrenal); lymphocyte depletion in thymus and spleen; altered circulating leukocyte counts (e.g., increased neutrophils with decreased lymphocytes and eosinophils); and altered reproductive functions. Typically, only some of these findings occur in a given study. Stress responses should be interpreted as secondary (indirect) rather than primary (direct) test article-related findings. Determining whether effects are the result of stress requires a weight-of-evidence approach. The evaluation and interpretation of routinely collected data (standard in-life, clinical pathology, and anatomic pathology endpoints) are appropriate and generally sufficient to assess whether or not changes are secondary to stress. The impact of possible stress-induced effects on data interpretation can partially be mitigated by toxicity study designs that use appropriate control groups (e.g., cohorts treated with vehicle and subjected to the same procedures as those dosed with test article), housing that minimizes isolation and offers environmental enrichment, and experimental procedures that minimize stress and sampling and analytical bias. This article is a comprehensive overview of the biological aspects of the stress response, beginning with a Summary (Section 1) and an Introduction (Section 2) that describes the historical and conventional methods used to characterize acute and chronic stress responses. These sections are followed by reviews of the primary systems and parameters that regulate and/or are influenced by stress, with an emphasis on parameters evaluated in toxicity studies: In-life Procedures (Section 3), Nervous System (Section 4), Endocrine System (Section 5), Reproductive System (Section 6), Clinical Pathology (Section 7), and Immune System (Section 8). The paper concludes (Section 9) with a brief discussion on Minimizing Stress-Related Effects (9.1.), and a final section explaining why Parameters routinely measured are appropriate for assessing the role of stress in toxicology studies (9.2.).

Chinese version of Impact of Weight on Quality of Life for Kids: psychometric properties in a large school-based sample.

PubMed

He, Jinbo; Zhu, Hong; Luo, Xingwei; Cai, Taisheng; Wu, Siyao; Lu, Yao

2016-06-01

The Impact of Weight on Quality of Life for Kids (IWQOL-Kids) is the first self-report questionnaire for assessing weight-related quality of life for youth. However, there is no Chinese version of IWQOL-Kids. Thus, the objective of this research was to translate IWQOL-Kids into Mandarin and evaluate its psychometric properties in a large school-based sample. The total sample included 2282 participants aged 11-18 years old, including 1703 non-overweight, 386 overweight and 193 obese students. IWQOL-Kids was translated and culturally adapted by following the international guidelines for instrument linguistic validation procedures. The psychometric evaluation included internal consistency, test-retest reliability, exploratory factor analysis (EFA), confirmatory factor analysis (CFA), convergent validity and discriminant validity. Cronbach's α for the Chinese version of IWQOL-Kids (IWQOL-Kids-C) was 0.956 and ranged from 0.891 to 0.927 for subscales. IWQOL-Kids-C showed a test-retest coefficient of 0.937 after 2 weeks and ranged from 0.847 to 0.903 for subscales. The original four-factor model was reproduced by EFA after seven iterations, accounting for 69.28% of the total variance. CFA demonstrated that the four-factor model had good fit indices with comparative fit index = 0.92, normed fit index = 0.91, goodness of fit index = 0.86, root mean square error of approximation = 0.07 and root mean square residual = 0.03. Convergent validity and discriminant validity were demonstrated with higher correlations between similar constructs and lower correlations between dissimilar constructs of IWQOL-Kids-C and PedsQL™ 4.0. The significant differences were found across the body mass index groups, and IWQOL-Kids-C had higher effect sizes than PedsQL™4.0 when comparing non-overweight and obese groups, supporting the sensitivity of IWQOL-Kids-C. IWQOL-Kids-C is a satisfactory, valid and reliable instrument to assess weight-related quality of life for Chinese children and adolescents aged 11-18 years old. © The Author 2015. Published by Oxford University Press on behalf of Faculty of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Limited evidence for affective and diurnal rhythm responses to dim light-at-night in male and female C57Bl/6 mice.

PubMed

Cleary-Gaffney, Michael; Coogan, Andrew N

2018-05-15

Circadian rhythms are recurring patterns in a range of behavioural, physiological and molecular parameters that display periods of near 24 h, and are underpinned by an endogenous biological timekeeping system. Circadian clocks are increasingly recognised as being key for health. Environmental light is the key stimulus that synchronises the internal circadian system with the external time cues. There are emergent health concerns regarding increasing worldwide prevalence of electric lighting, especially man-made light-at-night, and light's impact on the circadian system may be central to these effects. A number of previous studies have demonstrated increased depression-like behaviour in various rodent experimental models exposed to dim light-at-night. In this study we set out to study the impact of dim light-at-night on circadian and affective behaviours in C57Bl/6 mice. We set out specifically to examine the impact of sex on light at night's effects, as well as the impact of housing conditions. We report minimal impact of light-at-night on circadian and affective behaviours, as measured by the tail suspension test, the forced swim test, the sucrose preference test and the elevated plus maze. Light-at-night was also not associated with an increase in body weight, but was associated with a decrease in the cell proliferation marker Ki-67 in the dentate gyrus. In summary, we conclude that experimental contextual factors, such as model species or strain, may be considerable importance in the investigation of the impact of light at night on mood-related parameters. Copyright © 2018 Elsevier Inc. All rights reserved.

Control systems engineering for optimizing a prenatal weight gain intervention to regulate infant birth weight.

PubMed

Savage, Jennifer S; Downs, Danielle Symons; Dong, Yuwen; Rivera, Daniel E

2014-07-01

We used dynamical systems modeling to describe how a prenatal behavioral intervention that adapts to the needs of each pregnant woman may help manage gestational weight gain and alter the obesogenic intrauterine environment to regulate infant birth weight. This approach relies on integrating mechanistic energy balance, theory of planned behavior, and self-regulation models to describe how internal processes can be impacted by intervention dosages, and reinforce positive outcomes (e.g., healthy eating and physical activity) to moderate gestational weight gain and affect birth weight. A simulated hypothetical case study from MATLAB with Simulink showed how, in response to our adaptive intervention, self-regulation helps adjust perceived behavioral control. This, in turn, changes the woman's intention and behavior with respect to healthy eating and physical activity during pregnancy, affecting gestational weight gain and infant birth weight. This article demonstrates the potential for real-world applications of an adaptive intervention to manage gestational weight gain and moderate infant birth weight. This model could be expanded to examine the long-term sustainable impacts of an intervention that varies according to the participant's needs on maternal postpartum weight retention and child postnatal eating behavior.

Ultrasonic nondestructive evaluation of impact-damaged graphite fiber composite

NASA Technical Reports Server (NTRS)

Williams, J. H., Jr.; Lampert, N. R.

1980-01-01

Unidirectional Hercules AS/3501-6 graphite fiber epoxy composites were subjected to repeated controlled low-velocity drop weight impacts in the laminate direction. The degradation was ultrasonically monitored using through-thickness attenuation and a modified stress wave factor (SWF). There appears to be strong correlations between the number of drop-weight impacts, the residual tensile strength, the through-thickness attenuation, and the SWF. The results are very encouraging with respect to the NDE potential of both of these ultrasonic parameters to provide strength characterizations in virgin as well as impact-damaged fiber composite structures.

Evidence-based severity assessment: Impact of repeated versus single open-field testing on welfare in C57BL/6J mice.

PubMed

Bodden, Carina; Siestrup, Sophie; Palme, Rupert; Kaiser, Sylvia; Sachser, Norbert; Richter, S Helene

2018-01-15

According to current guidelines on animal experiments, a prospective assessment of the severity of each procedure is mandatory. However, so far, the classification of procedures into different severity categories mainly relies on theoretic considerations, since it is not entirely clear which of the various procedures compromise the welfare of animals, or, to what extent. Against this background, a systematic empirical investigation of the impact of each procedure, including behavioral testing, seems essential. Therefore, the present study was designed to elucidate the effects of repeated versus single testing on mouse welfare, using one of the most commonly used paradigms for behavioral phenotyping in behavioral neuroscience, the open-field test. In an independent groups design, laboratory mice (Mus musculus f. domestica) experienced either repeated, single, or no open-field testing - procedures that are assigned to different severity categories. Interestingly, testing experiences did not affect fecal corticosterone metabolites, body weights, elevated plus-maze or home cage behavior differentially. Thus, with respect to the assessed endocrinological, physical, and behavioral outcome measures, no signs of compromised welfare could be detected in mice that were tested in the open-field repeatedly, once, or, not at all. These findings challenge current classification guidelines and may, furthermore, stimulate systematic research on the severity of single procedures involving living animals. Copyright © 2017 Elsevier B.V. All rights reserved.

Recovery Responses to Maximal Exercise in Healthy-Weight Children and Children With Obesity.

PubMed

Easley, Elizabeth A; Black, W Scott; Bailey, Alison L; Lennie, Terry A; Sims, Wilma J; Clasey, Jody L

2018-03-01

The purpose of this study was to examine differences in heart rate recovery (HRRec) and oxygen consumption recovery (VO 2 recovery) between young healthy-weight children and children with obesity following a maximal volitional graded exercise test (GXTmax). Twenty healthy-weight children and 13 children with obesity completed body composition testing and performed a GXTmax. Immediately after the GXTmax, HRRec and VO 2 recovery were measured each minute for 5 consecutive minutes. There were no statistically significant group differences in HRRec for the 5 min following maximal exercise, Wilks's Lambda = .885, F(4, 28) = 0.911, p = .471, between the healthy-weight children and children with obesity despite statistically significant differences in body fat percentage (BF%; healthy-weight children, 18.5 ± 6.1%; children with obesity, 41.1 ± 6.9%, p < .001) and aerobic capacity relative to body mass (VO 2 peak; healthy-weight children, 46.8 ± 8.2 mL/kg/min; children with obesity, 31.9 ± 4.7 mL/kg/min, p < .001). There were statistically significant differences in VO 2 recovery for the 5 min following exercise, Wilks's Lambda = .676, F(4, 26) = 3.117, p = .032. There were no statistically significant correlations between HRRec and body mass index (BMI), BF%, VO 2 peak, or physical activity. In a healthy pediatric population, obesity alone does not seem to significantly impact HRRec, and because HRRec was not related to obesity status, BMI, or BF%, it should not be used as the sole indicator of aerobic capacity or health status in children. Using more than one recovery variable (i.e., HRRec and VO 2 recovery) may provide greater insight into cardiorespiratory fitness in this population.

Comparison of the Characteristics and Performance of Flurbiprofen 8.75 mg Spray for Sore Throat.

PubMed

Veale, David; Shephard, Adrian; Adams, Verity; Lidster, Charlotte

2017-01-01

Sore throat sprays provide targeted relief by delivering the active ingredient directly to the site of pain. Different sprays vary in characteristics, thus affecting delivery of the active ingredient to the throat, which can impact compliance. The characteristics and performance of FLURBIPROFEN 8.75 mg SPRAY were compared with 12 other sprays. Parameters assessed included spray angle and pattern, droplet size distribution, shot weight uniformity and shot weight throughout life. Among all sprays tested WICK Sulagil Halsspray had the smallest spray angle (46°) and also the smallest diameter spray pattern (X=32.8 mm; Y=34.4 mm). Thiovalone® Buccal Spray Suspension had both the largest spray angle (82°) and largest diameter spray pattern (X=62.6 mm; Y=78.0 mm). Hasco Sept® Aerosol Spray had the smallest droplet size (Dv90=118.4 μm) whereas OKi infiammazione e dolore® 0.16% spray had the largest (Dv90=214.34 μm). In terms of shot weight uniformity, TANTUM® VERDE GOLA 0.25% spray showed the least variation (2% RSD) between shots and UNIBEN Aerosol Spray the most (23.4% RSD). Shot weight throughout life studies showed that FLURBIPROFEN 8.75 mg SPRAY had the least deviation from shot weight (1.77%) whereas OKi infiammazione e dolore® 0.16% spray deviated the most (44.9%). FLURBIPROFEN 8.75 mg SPRAY had the second smallest spray angle/pattern and droplet size distribution and also the least variation in shot weight. Different sore throat sprays vary in different attributes, affecting delivery of the active ingredient. FLURBIPROFEN 8.75 mg SPRAY performed well overall, ranking first among all sprays tested, and providing a dose which is targeted and uniformly delivered throughout the life of the bottle. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Acoustic emission and acousto-ultrasonic signature analysis of failure mechanisms in carbon fiber reinforced polymer materials

NASA Astrophysics Data System (ADS)

Carey, Shawn Allen

Fiber reinforced polymer composite materials, particularly carbon (CFRPs), are being used for primary structural applications, particularly in the aerospace and naval industries. Advantages of CFRP materials, compared to traditional materials such as steel and aluminum, include: light weight, high strength to weight ratio, corrosion resistance, and long life expectancy. A concern with CFRPs is that despite quality control during fabrication, the material can contain many hidden internal flaws. These flaws in combination with unseen damage due to fatigue and low velocity impact have led to catastrophic failure of structures and components. Therefore a large amount of research has been conducted regarding nondestructive testing (NDT) and structural health monitoring (SHM) of CFRP materials. The principal objective of this research program was to develop methods to characterize failure mechanisms in CFRP materials used by the U.S. Army using acoustic emission (AE) and/or acousto-ultrasonic (AU) data. Failure mechanisms addressed include fiber breakage, matrix cracking, and delamination due to shear between layers. CFRP specimens were fabricated and tested in uniaxial tension to obtain AE and AU data. The specimens were designed with carbon fibers in different orientations to produce the different failure mechanisms. Some specimens were impacted with a blunt indenter prior to testing to simulate low-velocity impact. A signature analysis program was developed to characterize the AE data based on data examination using visual pattern recognition techniques. It was determined that it was important to characterize the AE event , using the location of the event as a parameter, rather than just the AE hit (signal recorded by an AE sensor). A back propagation neural network was also trained based on the results of the signature analysis program. Damage observed on the specimens visually with the aid of a scanning electron microscope agreed with the damage type assigned by the signature analysis program. The load level at which significant damage occurred in the specimens was evaluated using ASME Boiler and Pressure Vessel criteria. AU testing proved inconclusive for characterization of the damage due to common problems associated with AU testing such as: reproducibility difficulties due to degradation of the attachment of the sensors, damage not detected unless in the line of sight between sensors, and large intrinsic variation of the data.

Impact-induced fracture mechanisms of immiscible PC/ABS (50/50) blends

NASA Astrophysics Data System (ADS)

Machmud, M. N.; Omiya, M.; Inoue, H.; Kishimoto, K.

2018-03-01

This paper presents a study on fracture mechanisms of polycarbonate (PC)/acrylonitrile-butadiene-styrene (ABS) (50/50) blends with different ABS types under a drop weight impact test (DWIT) using a circular sheet specimen. Formation of secondary crack indicated by a stress-whitening layer on the mid-plane of scattered specimens and secondary surface of fracture perpendicular to primary fracture surface were captured under scanning electron microscope (SEM). Although the both blends finally failed in brittle modes, SEM observation showed that their secondary fracture mechanisms were completely different. Observation through the thickness of the etched PC/ABS specimen samples using SEM also clearly showed that PC and ABS were immiscible. The immiscibility between PC and ABS was indicated by presence of their layer structures through the thickness of the blends. It was revealed that layer of ABS structure was influenced by size of rubber particle and this latter parameter then affected microstructure and fracture mechanisms of the blends. Impact-induced fracture mechanisms of the blends due to such microstructures are discussed in this paper. It was also pointed out that the secondary cracking was likely caused by interface delamination between PC and ABS layers in the core due to transverse shear stress generated during the impact test.

Third prize: the impact of fluid environment manipulation on shockwave lithotripsy artificial calculi fragmentation rates.

PubMed

Méndez-Probst, Carlos E; Fernadez, Alfonso; Erdeljan, Petar; Vanjecek, Maaike; Cadieux, Peter A; Razvi, Hassan

2011-03-01

Studies have suggested that shockwave lithotripsy (SWL) stone fragmentation rates can be affected by characteristics of the fluid media surrounding the stone, although evidence to implicate the impact of urine specific gravity (SG) is limited and inconclusive. Our aim is to further explore the impact fluid media and SGs have on stone fragmentation using a variable focus lithotripter. Artificial stones were presoaked for 24 hours in urine and then shocked in various fluid media including artificial urine (SG 1.010 control, 1.020, and 1.07), human pooled urine (HPU), degassed HPU, Pentastarch, 100% and 30% contrast, degassed 30% contrast, 100% ethanol, deionized water (dH(2)O), degassed dH(2)O, 5% glucose, Ringer lactate, 0.9% saline, glycerol, whole blood, and lubricating gel. After soaking, SWL using the Modulith SLX-F2 electromagnetic lithotripter was performed. Fragments were dried and sieved using a 4-mm diameter opening grid. Fragments >4 mm were weighed and fragmentation coefficients (FCs) calculated (pre-SWL weight - post-SWL weight)/(pre-SWL weight) × 100. Fifteen stones were shocked for each fluid group. Fluid type, viscosity, and degassing all significantly impacted stone fragmentation. While the solutions' SG, per se, did not appear to affect stone fragmentation, the use of degassed 30% contrast significantly improved stone destruction over the SG 1.010 artificial urine control (95.3% vs 71.4, P < 0.01). Furthermore, degassing improved comminution rates by increasing the number of completely fragmented stones (FC = 100%). Using degassed 30% contrast, 12/15 stones were completely fragmented, compared with only 2/15 in the control group (P = 0.007). Among the whole blood, glycerol, and lubricating gel groups, only 1/15, 0/15, and 1/15 stones reached 100% FC respectively in the narrow focus, possibly because of the detrimental impact of increased viscosity. Different fluid media can significantly affect FC in vitro. Among the various fluids tested, degassed 30% contrast significantly increased the FC and total number of completely fragmented stones.

Analysis of Basis Weight Uniformity of Microfiber Nonwovens and Its Impact on Permeability and Filtration Properties

NASA Astrophysics Data System (ADS)

Amirnasr, Elham

It is widely recognized that nonwoven basis weight non-uniformity affects various properties of nonwovens. However, few studies can be found in this topic. The development of uniformity definition and measurement methods and the study of their impact on various web properties such as filtration properties and air permeability would be beneficial both in industrial applications and in academia. They can be utilized as a quality control tool and would provide insights about nonwoven behaviors that cannot be solely explained by average values. Therefore, for quantifying nonwoven web basis weight uniformity we purse to develop an optical analytical tool. The quadrant method and clustering analysis was utilized in an image analysis scheme to help define "uniformity" and its spatial variation. Implementing the quadrant method in an image analysis system allows the establishment of a uniformity index that can be used to quantify the degree of uniformity. Clustering analysis has also been modified and verified using uniform and random simulated images with known parameters. Number of clusters and cluster properties such as cluster size, member and density was determined. We also utilized this new measurement method to evaluate uniformity of nonwovens produced with different processes and investigated impacts of uniformity on filtration and permeability. The results of quadrant method shows that uniformity index computed from quadrant method demonstrate a good range for non-uniformity of nonwoven webs. Clustering analysis is also been applied on reference nonwoven with known visual uniformity. From clustering analysis results, cluster size is promising to be used as uniformity parameter. It is been shown that non-uniform nonwovens has provide lager cluster size than uniform nonwovens. It was been tried to find a relationship between web properties and uniformity index (as a web characteristic). To achieve this, filtration properties, air permeability, solidity and uniformity index of meltblown and spunbond samples was measured. Results for filtration test show some deviation between theoretical and experimental filtration efficiency by considering different types of fiber diameter. This deviation can occur due to variation in basis weight non-uniformity. So an appropriate theory is required to predict the variation of filtration efficiency with respect to non-uniformity of nonwoven filter media. And the results for air permeability test showed that uniformity index determined by quadrant method and measured properties have some relationship. In the other word, air permeability decreases as uniformity index on nonwoven web increase.

Effects of Beetroot Juice Supplementation on a 30-s High-Intensity Inertial Cycle Ergometer Test

PubMed Central

Domínguez, Raul; Garnacho-Castaño, Manuel Vicente; Cuenca, Eduardo; García-Fernández, Pablo; Muñoz-González, Arturo; de Jesús, Fernando; Lozano-Estevan, María Del Carmen; Veiga-Herreros, Pablo

2017-01-01

Background: Beetroot juice (BJ) is rich in inorganic nitrates and has proved effective at increasing blood nitric oxide (NO) levels. When used as a supplement BJ has shown an ergogenic effect on cardiorespiratory resistance exercise modalities, yet few studies have examined its impact on high intensity efforts. Objective: To assess the effects of BJ intake on anaerobic performance in a Wingate test. Methods: Fifteen trained men (age 21.46 ± 1.72 years, height 1.78 ± 0.07 cm and weight 76.90 ± 8.67 kg) undertook a 30-s maximum intensity test on an inertial cycle ergometer after drinking 70 mL of BJ (5.6 mmol NO3−) or placebo. Results: Despite no impacts of BJ on the mean power recorded during the test, improvements were produced in peak power (6%) (p = 0.034), average power 0–15 s (6.7%) (p = 0.048) and final blood lactate levels (82.6%) (p < 0.001), and there was a trend towards a shorter time taken to attain peak power (−8.4%) (p = 0.055). Conclusions: Supplementation with BJ has an ergonomic effect on maximum power output and on average power during the first 15 s of a 30-s maximum intensity inertial cycle ergometer test. PMID:29244746

Compressive evaluation of homogeneous and graded epoxy-glass particulate composites.

PubMed

Seaglar, J; Rousseau, C-E

2015-04-01

The propagation of stress waves in epoxy-glass particulate composites and graded materials was studied experimentally. Materials tested in this study consisted of an epoxy matrix with various concentrations of spherical glass particles having a mean diameter of 42μm. Plate impact experiments were performed using a gas gun. Embedded within the specimens were manganin stress gauges used to record propagating compressive longitudinal stress waves through the material. High strain rate experiments using a Split Hopkinson Pressure Bar (SHPB) apparatus were also performed to evaluate the dynamic strength of the specimens, while quasi-static compression tests were undertaken to characterize their quasi-static behavior. Ultrasonic wave speed measurements were carried-out in order to obtain additional material properties and characterize the gradation in functionally graded materials (FGM). It was found that low volume fractions of particles are detrimental to the performance of the material under impact loading, while concentrations in the range of about 30 to 45% by volume exhibit characteristics of higher degrees of scattering. This suggests that materials in this latter range would be more effective in the thwarting of destructive shock waves than the homogeneous matrix material. Impact testing of FGM specimens suggests that impact loading on the stiff (high volume fraction) face results in much higher levels of scattering. Therefore, such materials would be effective for use in light weight armor or as shielding materials due to their effective attenuation of mechanical impulses. Copyright © 2015 Elsevier B.V. All rights reserved.

The impact of acculturation level on weight status and weight outcomes in Mexican American children

USDA-ARS?s Scientific Manuscript database

Currently 39% of Hispanic children and adolescents are overweight and obese. Higher levels of acculturation have been shown to be related to obesity in Mexican American adults. Conflicting findings exists regarding this relationship in children and little is known about the impact of acculturation o...

A Core Journal Decision Model Based on Weighted Page Rank

ERIC Educational Resources Information Center

Wang, Hei-Chia; Chou, Ya-lin; Guo, Jiunn-Liang

2011-01-01

Purpose: The paper's aim is to propose a core journal decision method, called the local impact factor (LIF), which can evaluate the requirements of the local user community by combining both the access rate and the weighted impact factor, and by tracking citation information on the local users' articles. Design/methodology/approach: Many…

Impact of prescribed fire on understory and forest floor nutrients

Treesearch

Walter A. Hough

1981-01-01

The impact of low-intensity prescribed fires on slash pine/saw-palmetto/gallberry understory and forest floor nutrients was estimated from measurements before and after burning. Highly significant correlations existed between weight loss of these fuel components and the weight loss of several elements. Energy loss was also highly correlated with forestfloor and...

IMPACT OF BODY WEIGHT CHANGE ON THE EDSTAC TIER 1 MALE AND FEMALE PUBERTAL PROTOCOLS

EPA Science Inventory

IMPACT OF BODY WEIGHT CHANGE ON THE EDSTAC TIER I MALE AND FEMALE PUBERTAL PROTOCOLS. R.L. Cooper, T.E. Stoker, K. McElroy, J. Ferrell, K. Leffler, K. Bremser and S.C. Laws. Endocrinology Branch, Reproductive Toxicology Division, NHEERL, ORD, USEPA, RTP, NC. Sponsor: R.J. Kavl...

Association of gestational weight gain expectations with advice on actual weight gain

USDA-ARS?s Scientific Manuscript database

To examine pregnant women's gestational weight gain expectations/advice from various sources (i.e., self, family/friends, physician) and the impact of these sources of expectations/advice on actual measured gestational weight gain. Pregnant women (n=230, 87.4% Caucasian, second pregnancy) in a cohor...

Spatio-temporal gait disorder and gait fatigue index in a six-minute walk test in women with fibromyalgia.

PubMed

Heredia-Jimenez, Jose; Latorre-Roman, Pedro; Santos-Campos, Maria; Orantes-Gonzalez, Eva; Soto-Hermoso, Victor M

2016-03-01

Gait disorders in fibromyalgia patients affect several gait parameters and different muscle recruitment patterns. The aim of this study was to assess the gait differences observed during a six-minute walk test between fibromyalgia patients and healthy controls. Forty-eight women with fibromyalgia and 15 healthy women were evaluated. Fibromyalgia patients met the American College of Rheumatology criteria for fibromyalgia selected of an ambulatory care. Both patients and controls had a negative history of musculoskeletal disease, neurological disorders, and gait abnormalities. The 15 controls were healthy women matched to the patients in age, height and body weight. Spatio-temporal gait variables and the rate of perceived exertion during the six-minute walk test (all subjects) and Fibromyalgia Impact Questionnaire (fibromyalgia subjects) were evaluated. All walking sets on the GaitRITE were collected and the gait variables were selected at three stages during the six-minute walk test: two sets at the beginning, two sets at 3 min and two sets at the end of the test. In addition, the Fibromyalgia Impact Questionnaire was used for the fibromyalgia patients. Fibromyalgia patients showed a significant decrease in all spatio-temporal gait variables at each of the three stages and had a lower walk distance covered in the six-minute walk test and higher rate of perceived exertion. No correlations were found between the Fibromyalgia Impact Questionnaire and gait variables. The fibromyalgia and control subjects showed lower gait fatigue indices between the middle and last stages. Gait analysis during a six-minute walk test is a good tool to assess the fatigue and physical symptoms of patients with fibromyalgia. Copyright © 2016 Elsevier Ltd. All rights reserved.

Tests of two new polyurethane foam wheelchair tires.

PubMed

Gordon, J; Kauzlarich, J J; Thacker, J G

1989-01-01

The performance characteristics of four 24-inch wheelchair tires are considered; one pneumatic and three airless. Specifically, two new airless polyurethane foam tires (circular and tapered cross-section) were compared to both a molded polyisoprene tire and a rubber pneumatic tire. Rolling resistance, coefficient of static friction, spring rate, tire roll-off, impact absorption, wear resistance, and resistance to compression set were the characteristics considered for the basis of comparison. Although the pneumatic tire is preferred by many wheelchair users, the two new polyurethane foam tires were found to offer a performance similar to the high-pressure pneumatic tire. In addition, the foam tires are less expensive and lighter in weight than the other tires tested.

Space vehicle integrated thermal protection/structural/meteoroid protection system, volume 1

NASA Technical Reports Server (NTRS)

Bartlett, D. H.; Zimmerman, D. K.

1973-01-01

A program was conducted to determine the merit of a combined structure/thermal meteoroid protection system for a cryogenic vehicle propulsion module. Structural concepts were evaluated to identify least weight designs. Thermal analyses determined optimum tank arrangements and insulation materials. Meteoroid penetration experiments provided data for design of protection systems. Preliminary designs were made and compared on the basis of payload capability. Thermal performance tests demonstrated heat transfer rates typical for the selected design. Meteoroid impact tests verified the protection characteristics. A mockup was made to demonstrate protection system installation. The best design found combined multilayer insulation with a truss structure vehicle body. The multilayer served as the thermal/meteoroid protection system.

The effects of pressure dependent constitutive model to simulate concrete structures failure under impact loads

NASA Astrophysics Data System (ADS)

Mokhatar, S. N.; Sonoda, Y.; Kamarudin, A. F.; Noh, M. S. Md; Tokumaru, S.

2018-04-01

The main objective of this paper is to explore the effect of confining pressure in the compression and tension zone by simulating the behaviour of reinforced concrete/mortar structures subjected to the impact load. The analysis comprises the numerical simulation of the influences of high mass low speed impact weight dropping on concrete structures, where the analyses are incorporated with meshless method namely as Smoothed Particle Hydrodynamics (SPH) method. The derivation of the plastic stiffness matrix of Drucker-Prager (DP) that extended from Von-Mises (VM) yield criteria to simulate the concrete behaviour were presented in this paper. In which, the displacements for concrete/mortar structures are assumed to be infinitesimal. Furthermore, the influence of the different material model of DP and VM that used numerically for concrete and mortar structures are also discussed. Validation upon existing experimental test results is carried out to investigate the effect of confining pressure, it is found that VM criterion causes unreal impact failure (flexural cracking) of concrete structures.

Early changes in socioeconomic status do not predict changes in body mass in the first decade of life.

PubMed

Starkey, Leighann; Revenson, Tracey A

2015-04-01

Many studies link childhood socioeconomic status (SES) to body mass index (BMI), but few account for the impact of socioeconomic mobility throughout the lifespan. This study aims to investigate the impact of socioeconomic mobility on changes in BMI in childhood. Analyses tested whether [1] socioeconomic status influences BMI, [2] changes in socioeconomic status impact changes in BMI, and [3] timing of socioeconomic status mobility impacts BMI. Secondary data spanning birth to age 9 were analyzed. SES and BMI were investigated with gender, birth weight, maternal race/ethnicity, and maternal nativity as covariates. Autoregressive structural equation modeling and latent growth modeling were used. Socioeconomic status in the first year of life predicted body mass index. Child covariates were consistently associated with body mass index. Rate of change in socioeconomic status did not predict change in body mass index. The findings suggest that early socioeconomic status may most influence body mass in later childhood.

'Battling my biology': psychological effects of genetic testing for risk of weight gain.

PubMed

Meisel, S F; Wardle, J

2014-04-01

The availability of genetic tests for multifactorial conditions such as obesity raises concerns that higher-risk results could lead to fatalistic reactions or lower-risk results to complacency. No study has investigated the effects of genetic test feedback for the risk of obesity in non-clinical samples. The present study explored psychological and behavioral reactions to genetic test feedback for a weight related gene (FTO) in a volunteer sample (n = 18) using semi-structured interviews. Respondents perceived the gene test result as scientifically objective; removing some of the emotion attached to the issue of weight control. Those who were struggling with weight control reported relief of self-blame. There was no evidence for either complacency or fatalism; all respondents emphasized the importance of lifestyle choices in long-term weight management, although they recognized the role of both genes and environment. Regardless of the test result, respondents evaluated the testing positively and found it motivating and informative. Genetic test feedback for risk of weight gain may offer psychological benefits beyond its objectively limited clinical utility. As the role of genetic counselors is likely to expand, awareness of reasons for genetic testing for common, complex conditions and reactions to the test result is important.

Perinatal impact of the use of metformin and glyburide for the treatment of gestational diabetes mellitus.

PubMed

Silva, Jean Carl; Fachin, Débora Raquel Rigon Narciso; Coral, Morgana Leonora; Bertini, Anna Maria

2012-01-10

To evaluate the perinatal impact of metformin and glyburide in the treatment of gestational diabetes mellitus (GDM). A randomized clinical trial conducted from July 2008 until September 2010 studied 200 pregnant women with GDM who required adjunctive therapy to diet and physical activity. Patients were randomized to use metformin (n=104) or glyburide (n=96). The drugs were replaced by insulin when they reached the maximum dose without glycemic control. Assessed outcomes: weight and neonatal blood glucose. No difference was found (P>0.05) between the groups regarding maternal age, gestational age at inclusion, body mass index, glucose levels in oral glucose tolerance test (OGTT) 75 g and glycemic control. Difference was found in the number of previous pregnancies (2.84 vs. 2.47, P=0.04) and weight gain during pregnancy (7.78 vs. 9.84, P=0.04) in the metformin group and glyburide respectively. The perinatal results showed no difference (P>0.05) in the percentage of cesarean deliveries, gestational age at delivery, number of newborns large for gestational age (LGA), neonatal hypoglycemia, admission to intensive care unit and perinatal death. We found differences in weight (3193 g vs. 3387 g, P=0.01) and ponderal index (2.87 vs. 2.96, P=0.05) of newborns, and in neonatal blood glucose levels at the 1st (59.78 vs. 54.08, P=0.01) and 3rd h (61.53 vs. 55.89, P=0.01) after birth between the metformin and glyburide groups respectively. Weight and ponderal index were lower in the newborns of the metformin group; glucose levels (1st and 3rd h after birth) were lower in the glyburide group.

Clinical efficacy and metabolic impact of two different dosages of ethinyl-estradiol in association with drospirenone in normal-weight women with polycystic ovary syndrome: a randomized study.

PubMed

Romualdi, D; De Cicco, S; Busacca, M; Gagliano, D; Lanzone, A; Guido, M

2013-09-01

The estrogenic component of estro- progestin (EP) is responsible for a negative impact on the metabolic and lipid assessment in women with polycystic ovary syndrome (PCOS). To evaluate the risk/benefit ratio of two EP combinations, containing the same progestin (3 mg drospirenone) and a different dose of ethinyl-estradiol (EE) (20 vs 30 μg) and to compare their effects on the clinical and endocrine-metabolic parameters in normal-weight PCOS women. In this randomized pilot study, we enrolled 30 young normal-weight PCOS women. Fifteen subjects were allocated to group A (20 μg EE) and 15 PCOS subjects to group B (30 μg EE). Hirsutism score, hormonal assays, oral glucose tolerance test, euglycemic hyperinsulinemic clamp and lipid profile were performed at baseline, and after 6 and 12 months of therapy. Main outcome measures were signs of hyperandrogenism, glucose and insulin metabolism, lipid profile. Both treatment regimens induced a significant improvement in hirsutism score, testosterone, DHEAS, and SHBG levels. Androstenedione significantly dropped only in patients of Group A, while 17(OH)P only in those from Group B. Both the formulations did not significantly modify gluco-insulinemic metabolism. Total cholesterol, LDL cholesterol, and HDL cholesterol levels significantly increased in both groups. Triglycerides levels, which increased as well, resulted more markedly influenced by the formulation with 30 μg EE. In association with drospirenone, 20 μg EE results as effective as 30 μg in improving clinical and hormonal features of normal-weight PCOS women, while exhibiting a milder influence on lipidic parameters.

Investigation of Corrosion Protection in Oil Mineral Reservoirs by Nanocomposites Used as Coating Layers

NASA Astrophysics Data System (ADS)

Al-Sarraf, Abdulhameed R.; Al-Saaidi, Samer A.

2018-05-01

In this study, a number of nanocomposites were prepared by adding magnesium oxide (MgO) with weight percentages (1, 2 & 3)% to cellulose nitrate and sodium silicate as an intermediate layer and other nanocomposites by adding MgO, coal coke and hybrid (MgO & coal coke with ratio 1:1) with weight percentages (1, 2 & 3)% to epoxy resin as final layer. The identity of the used metal is determined by spectrometer OE thermo. The nature and topography of the surface layers were examined by optical microscope and atomic force microscope (AFM). Mechanical properties are indicated by hardness, wear rate, impact strength and adhesion strength. The efficiency of the layers prepared to inhibit corrosion in the oil mineral reservoirs of the oil products distribution company was studied by electrochemical corrosion test in addition to the chemical corrosion test. The used metal is (St-37) according to (ASTM). It was found that the best intermediate layer (cellulose nitrate+3%MgO) and the final layer is the epoxy resin reinforced by 2% hybrid.

Influence of driving cycles on unit emissions from passenger cars

NASA Astrophysics Data System (ADS)

Joumard, R.; André, M.; Vidon, R.; Tassel, P.; Pruvost, C.

Small samples of petrol engine or diesel cars, equipped with or without catalysts, were tested over 36 driving cycles divided into four categories - standard cycles and three sets of cycles more representative of real-world driving conditions. The tests addressed standard gaseous pollutants and fuel consumption and also less frequently measured pollutant such as CH 4. In the first part of this paper we examine cold emissions in order to assess the duration of the cold start impact and the representativity of the cold ECE15 cycle. Then unit emissions are compared over the four driving cycle families. As compared to representative cycles, the standardised cycles underestimate hot emissions by almost 50% for petrol engine cars and 30% for diesel vehicles. Conversely, the results obtained for the three representative cycle families are in relatively close agreement with each other - within approximately 10%. However, the cinematic properties of the three families differ. Finally, we demonstrate that weighting all emission data equally, not taking into account the weight of each cycle in overall traffic, introduces significant biases, particularly when plotting emission vs. average speed curves.

Change in size and impact performance of football helmets from the 1970s to 2010.

PubMed

Viano, David C; Halstead, David

2012-01-01

Linear impactor tests were conducted on football helmets from the 1970s-1980s to complement recently reported tests on 1990 s and 2010 s helmets. Helmets were placed on the Hybrid III head with an array of accelerometers to determine translational and rotational acceleration. Impacts were at four sites on the helmet shell at 3.6-11.2 m/s. The four generations of helmets show a continuous improvement in response from bare head impacts in terms of Head Injury Criterion (HIC), peak head acceleration and peak rotational acceleration. Helmets of 2010 s weigh 1.95 ± 0.2 kg and are 2.7 times heavier than 1970s designs. They are also 4.3 cm longer, 7.6 cm higher, and 4.9 cm wider. The extra size and weight allow the use of energy absorbing padding that lowers forces in helmet impacts. For frontal impacts at 7.4 m/s, the four best performing 2010 s helmets have HIC of 148 ± 23 compared to 179 ± 42 for the 1990 s baseline, 231 ± 27 for the 1980s, 253 ± 22 for the 1970s helmets, and 354 ± 3 for the bare head. The additional size and padding of the best 2010 s helmets provide superior attenuation of impact forces in normal play and in conditions associated with concussion than helmets of the 1970s-1990 s.

Effect of feeding a weight loss food beyond a caloric restriction period on body composition and resistance to weight gain in cats.

PubMed

Floerchinger, Amanda M; Jackson, Matthew I; Jewell, Dennis E; MacLeay, Jennifer M; Hahn, Kevin A; Paetau-Robinson, Inke

2015-08-15

To determine the effect of feeding a food with coconut oil and supplemental L-carnitine, lysine, leucine, and fiber on weight loss and maintenance in cats. Prospective clinical study. 50 overweight cats. The study consisted of 2 trials. During trial 1, 30 cats were allocated to 3 groups (10 cats/group) to be fed a dry maintenance cat food to maintain body weight (group 1) or a dry test food at the same amount on a mass (group 2) or energy (group 3) basis as group 1. During trial 2, each of 20 cats was fed the test food and caloric intake was adjusted to maintain a weight loss rate of 1%/wk (weight loss phase). Next, each cat was fed the test food in an amount calculated to maintain the body weight achieved at the end of the weight loss phase (weight maintenance phase). Cats were weighed and underwent dual-energy x-ray absorptiometry monthly. Metabolomic data were determined before (baseline) and after each phase. During trial 1, cats in groups 2 and 3 lost significantly more weight than did those in group 1. During trial 2, cats lost a significant amount of body weight and fat mass but retained lean body mass during the weight loss phase and continued to lose body weight and fat mass but gained lean body mass during the weight maintenance phase. Evaluation of metabolomic data suggested that fat metabolism was improved from baseline for cats fed the test food. Results suggested that feeding overweight cats the test food caused weight loss and improvements in body condition during the weight maintenance phase, possibly because the food composition improved energy metabolism.

Transport composite fuselage technology: Impact dynamics and acoustic transmission

NASA Technical Reports Server (NTRS)

Jackson, A. C.; Balena, F. J.; Labarge, W. L.; Pei, G.; Pitman, W. A.; Wittlin, G.

1986-01-01

A program was performed to develop and demonstrate the impact dynamics and acoustic transmission technology for a composite fuselage which meets the design requirements of a 1990 large transport aircraft without substantial weight and cost penalties. The program developed the analytical methodology for the prediction of acoustic transmission behavior of advanced composite stiffened shell structures. The methodology predicted that the interior noise level in a composite fuselage due to turbulent boundary layer will be less than in a comparable aluminum fuselage. The verification of these analyses will be performed by NASA Langley Research Center using a composite fuselage shell fabricated by filament winding. The program also developed analytical methodology for the prediction of the impact dynamics behavior of lower fuselage structure constructed with composite materials. Development tests were performed to demonstrate that the composite structure designed to the same operating load requirement can have at least the same energy absorption capability as aluminum structure.

Effects of shoe cushioning upon ground reaction forces in running.

PubMed

Clarke, T E; Frederick, E C; Cooper, L B

1983-11-01

To determine the effects of widely varying amounts of cushioning upon vertical force (VF) parameters, ten male subjects, (mean weight = 68.0 kg) ran at a speed of 4.5 m . s-1 (6 min/mile pace) and contacted a Kistler force platform. Two shoes were tested: a hard one and a softer shoe that had 50% more cushioning as measured by an instrumented impact tester. Five right footfalls were collected for each shoe on each subject during which the ground reaction forces were sampled at 500 HZ using a PDP 11/34 minicomputer. Eight parameters from the VF data obtained for each trial were selected for analysis and compared statistically using a paired difference t test. It was found [force magnitudes expressed in multiples of body weight (BW)] that the time to the vertical force impact peak (VFIP) was significantly longer (hard = 22.5 ms, soft = 26.6 ms) in the soft shoe; however, no differences were seen in the magnitudes (hard = 2.30 BW, soft = 2.34 BW). The minimum after the VFIP was also significantly delayed in the soft shoe (hard = 33.8 ms, soft = 37.9 ms) and was significantly greater in the soft shoe (hard = 1.46 BW, soft = 1.90 BW). The peak VF propulsive force occurred statistically at the same time in both shoes (hard = 85.7 ms, soft = 84.0 ms), but was significantly greater in the soft shoe (hard = 2.73 BW, soft = 2.83 BW).(ABSTRACT TRUNCATED AT 250 WORDS)

Weighing the evidence of ecological risk from PAHs contamination in the estuarine environment of Salina Cruz Bay, México.

PubMed

Salazar-Coria, L; Schifter, I; González-Macías, C

2010-03-01

Results of bulk-phase chemical measurements, toxicological tests combined with bioaccumulation measures in fishes, were used to evaluate the toxicity of the 16 USEPA priority polycyclic aromatic hydrocarbons from the sediment collected from eight stations of the Ventosa Estuarine System, located close to the main center of processing oil in the Mexican Pacific coast. Levels of the sum of polycyclic aromatic hydrocarbons varied from 22 to 6,850 microg kg(-1) dry weight. Based on sediment quality guidelines, the compounds with high environmental priority were acenaphtylene, acenaphtene, and phenanthrene. Acute toxicity tests with Vibrio fischeri and Daphnia magna as well as chronic toxicity with Panagrellus redivivus were performed. The quantification of hepatic ethoxyresorufin O-deethylase activity was used to assess the induction of the mixed function oxygenase system of brown trout. However, because it is often difficult to blend the results from such very different assays into a unified decision about the potential for impacts, a weight-of-evidence (WOE) approach to sediment quality investigations was followed. These assays provided measurement endpoints that could be used to develop an overall evaluation of the potential for environmental impacts from the oil processing operations. WOE provides a valuable tool for assessing the results of environmental investigations because it provides a framework for considering the strengths and weaknesses of environmental measurements, an approach for addressing uncertainty in the measurements, and documentation of the evaluation and its assumptions.

Alterations in Body Uneasiness, Eating Attitudes, and Psychopathology Before and After Cross-Sex Hormonal Treatment in Patients with Female-to-Male Gender Dysphoria.

PubMed

Turan, Şenol; Aksoy Poyraz, Cana; Usta Sağlam, Nazife Gamze; Demirel, Ömer Faruk; Haliloğlu, Özlem; Kadıoğlu, Pınar; Duran, Alaattin

2018-03-28

Body dissatisfaction plays an important role in the development of psychiatric problems such as eating disorders as well as gender dysphoria (GD). Cross-sex hormonal treatment (CHT) alleviates the dissatisfaction by making various changes in the body. We examined the alteration of body uneasiness, eating attitudes and behaviors, and psychological symptoms longitudinally in Turkish participants with female-to-male gender dysphoria (FtM GD) after CHT. Thirty-seven participants with FtM GD and 40 female controls were asked to complete the Body Uneasiness Test to explore different areas of body-related psychopathology, the Eating Attitudes Test to assess eating disturbances, and the Symptom Checklist-90 Revised to measure psychological state, both before CHT and after 6 months of CHT administration. The baseline mean body weight, BMI scores, body uneasiness scores, and general psychopathological symptoms of participants with FtM GD were significantly higher than female controls, whereas baseline eating attitudes and behaviors were not significantly different. Over time, FtM GD participants' mean body weight and BMI scores increased, body uneasiness and general psychopathological symptoms decreased, and eating attitudes and behaviors had not changed at 24th weeks following CHT administration compared to baseline. CHT may have a positive impact on body uneasiness and general psychopathological symptoms in participants with FtM GD. However, CHT does not have an impact on eating attitudes and behaviors.