21 CFR 173.20 - Ion-exchange membranes.

Code of Federal Regulations, 2012 CFR

2012-04-01

... ion-exchange membrane is prepared by subjecting a polyethylene base conforming to § 177.1520 of this chapter to polymerization with styrene until the polystyrene phase of the base is not less than 16 percent nor more than 30 percent by weight. The base is then modified by reaction with chloromethyl methyl...

21 CFR 173.20 - Ion-exchange membranes.

Code of Federal Regulations, 2010 CFR

2010-04-01

... ion-exchange membrane is prepared by subjecting a polyethylene base conforming to § 177.1520 of this chapter to polymerization with styrene until the polystyrene phase of the base is not less than 16 percent nor more than 30 percent by weight. The base is then modified by reaction with chloromethyl methyl...

Problem Video Gaming Among Children Enrolled in Tertiary Weight Management Programs.

PubMed

Stubblefield, Sam; Datto, George; Phan, Thao-Ly T; Werk, Lloyd N; Stackpole, Kristin; Siegel, Robert; Stratbucker, William; Tucker, Jared M; Christison, Amy L; Hossain, Jobayer; Gentile, Douglas A

2017-02-01

Prior studies show seven percent to nine percent of children demonstrate gaming behaviors that affect a child's ability to function (e.g., problem gaming), but none have examined the association between problem gaming and weight status. The objective of this study was to determine the prevalence of problem gaming among children enrolled in tertiary weight management programs. We administered a computer-based survey to a convenience sample of children aged 11-17 years enrolled in five geographically diverse pediatric weight management (PWM) programs in the COMPASS (Childhood Obesity Multi-Program Analysis and Study System) network. The survey included demographics, gaming characteristics, and a problem gaming assessment. The survey had 454 respondents representing a diverse cohort (53 percent females, 27 percent black, 24 percent Hispanic, 41 percent white) with mean age of 13.7 years. A total of 8.2 percent of respondents met criteria for problem gaming. Problem gamers were more likely to be white, male, play mature-rated games, and report daily play. Children in PWM programs reported problem gaming at the same rate as other pediatric populations. Screening for problem gaming provides an opportunity for pediatricians to address gaming behaviors that may affect the health of children with obesity who already are at risk for worsened health and quality of life.

Problem Video Gaming Among Children Enrolled in Tertiary Weight Management Programs

PubMed Central

Datto, George; Phan, Thao-Ly T.; Werk, Lloyd N.; Stackpole, Kristin; Siegel, Robert; Stratbucker, William; Tucker, Jared M.; Christison, Amy L.; Hossain, Jobayer; Gentile, Douglas A.

2017-01-01

Abstract Prior studies show seven percent to nine percent of children demonstrate gaming behaviors that affect a child's ability to function (e.g., problem gaming), but none have examined the association between problem gaming and weight status. The objective of this study was to determine the prevalence of problem gaming among children enrolled in tertiary weight management programs. We administered a computer-based survey to a convenience sample of children aged 11–17 years enrolled in five geographically diverse pediatric weight management (PWM) programs in the COMPASS (Childhood Obesity Multi-Program Analysis and Study System) network. The survey included demographics, gaming characteristics, and a problem gaming assessment. The survey had 454 respondents representing a diverse cohort (53 percent females, 27 percent black, 24 percent Hispanic, 41 percent white) with mean age of 13.7 years. A total of 8.2 percent of respondents met criteria for problem gaming. Problem gamers were more likely to be white, male, play mature-rated games, and report daily play. Children in PWM programs reported problem gaming at the same rate as other pediatric populations. Screening for problem gaming provides an opportunity for pediatricians to address gaming behaviors that may affect the health of children with obesity who already are at risk for worsened health and quality of life. PMID:28170312

Nevada Kids Count Data Book, 1997.

ERIC Educational Resources Information Center

We Can, Inc., Las Vegas, NV.

This Kids Count data book is the first to examine statewide indicators of the well being of Nevada's children. The statistical portrait is based on 15 indicators of child well being: (1) percent low birth-weight babies; (2) infant mortality rate; (3) percent of children in poverty; (4) percent of children in single-parent families; (5) percent of…

Ductile tungsten-nickel-alloy and method for manufacturing same

DOEpatents

Ludwig, Robert L.

1978-01-01

The tensile elongation of a tungsten-nickel-iron alloy containing essentially 95 weight percent reprocessed tungsten, 3.5 weight percent nickel, and 1.5 weight percent iron is increased from a value of less than about 1 percent up to about 23 percent by the addition of less than 0.5 weight percent of a reactive metal consisting of niobium and zirconium.

Flywheel containment technology assessment

NASA Astrophysics Data System (ADS)

Coppa, A. P.; Zweben, C. H.; Mirandy, L.

1980-07-01

The important effect of containment weight on the density of a flywheel was examined for a selection of flywheel designs incorporating metallic and composite construction as contained by steel housings. Three different flywheel constructions are presented, namely laminated rotor, shaped disk, and multirim. Materials are steel for the first two types and E glass, S glass and Kevlar composites for the third type. All of the flywheels were comparable in that their stress levels were based on long term high cycle operation. All of the specific energy values were penalized heavily by the containment weight, the least being the laminated rotor (-29 percent) and the greatest being the shaped disk (-72 percent). The penalties for the multirim designs are -45 percent (E glass), -55 percent (S glass), and -60 percent (Kevlar). The low penalty of the laminated steel rotor was due to the fact that the containment weight was based on withstanding the rupture of only one of the constituent disks. The high penalty of the shaped steel disk, on the other hand, reflects the severe containment action that resulted from its bursting into large, hard, and axially narrow fragments. The intermediate but nevertheless substantial containment penalty of the multidrum composite rotors resulted from their relatively mild containment behavior.

21 CFR 173.20 - Ion-exchange membranes.

Code of Federal Regulations, 2014 CFR

2014-04-01

... subjecting a polyethylene base conforming to § 177.1520 of this chapter to polymerization with styrene until the polystyrene phase of the base is not less than 16 percent nor more than 30 percent by weight. The base is then modified by reaction with chloromethyl methyl ether, and by subsequent amination with tri...

Improvement in cyclic oxidation of the nickel-base superalloy B-1900 by addition of one percent silicon

NASA Technical Reports Server (NTRS)

Lowell, C. E.; Miner, R. V.

1973-01-01

Cast B-1900 with and without 1 weight percent Si was subjected to cyclic oxidation at 1000 and 1100 C in air for 700 and 200 hours, respectively. The results were judged by specific weight change, metallography and X-ray diffraction. Si was found to be of significant value in reducing oxidation attack, probably by increasing scale adherence.

12 CFR 3.52 - Simple risk-weight approach (SRWA).

Code of Federal Regulations, 2014 CFR

2014-01-01

... this paragraph (b). (1) Zero percent risk weight equity exposures. An equity exposure to a sovereign... International Monetary Fund, an MDB, and any other entity whose credit exposures receive a zero percent risk weight under § 3.32 may be assigned a zero percent risk weight. (2) 20 percent risk weight equity...

High gas velocity oxidation and hot corrosion testing of oxide dispersion-strengthened nickel-base alloys

NASA Technical Reports Server (NTRS)

Deadmore, D. L.; Lowell, C. E.

1975-01-01

Several oxide dispersion strengthened (ODS) nickel-base alloys were tested in high velocity gases for cyclic oxidation resistance at temperatures to 1200 C and times to 500 hours and for hot corrosion resistance at 900 C for 200 hours. Nickel-chromium-aluminum ODS alloys were found to have superior resistance to oxidation and hot corrosion when compared to bare and coated nickel-chromium ODS alloys. The best of the alloys tested had compositions of nickel - 15.5 to 16 weight percent chromium with aluminum weight percents between 4.5 and 5.0. All of the nickel-chromium-aluminum ODS materials experienced small weight losses (less than 16 mg/sq cm).

Reliability Based Design for a Raked Wing Tip of an Airframe

NASA Technical Reports Server (NTRS)

Patnaik, Surya N.; Pai, Shantaram S.; Coroneos, Rula M.

2011-01-01

A reliability-based optimization methodology has been developed to design the raked wing tip of the Boeing 767-400 extended range airliner made of composite and metallic materials. Design is formulated for an accepted level of risk or reliability. The design variables, weight and the constraints became functions of reliability. Uncertainties in the load, strength and the material properties, as well as the design variables, were modeled as random parameters with specified distributions, like normal, Weibull or Gumbel functions. The objective function and constraint, or a failure mode, became derived functions of the risk-level. Solution to the problem produced the optimum design with weight, variables and constraints as a function of the risk-level. Optimum weight versus reliability traced out an inverted-S shaped graph. The center of the graph corresponded to a 50 percent probability of success, or one failure in two samples. Under some assumptions, this design would be quite close to the deterministic optimum solution. The weight increased when reliability exceeded 50 percent, and decreased when the reliability was compromised. A design could be selected depending on the level of risk acceptable to a situation. The optimization process achieved up to a 20-percent reduction in weight over traditional design.

Thermodynamics and kinetics of pack aluminide coating formation on IN-100

NASA Technical Reports Server (NTRS)

Levine, S. R.; Caves, R. M.

1973-01-01

An investigation of the effects of pack variables on the formation of aluminide coatings on nickel-base superalloy IN-100 was conducted. Also, the thermodynamics and kinetics of coating formation were analyzed. Observed coating weights were in good agreement with predictions made from the analysis. Pack temperature rather than pack aluminum activity controls the principal coating phase formed. In 1 weight percent aluminum packs, aluminum weight gains were related to the halide pack activator. Solid-state nickel diffusion controlled coating formation from sodium fluoride and chloride and ammonium fluoride activated packs. In other ammonium and sodium halide activated 1 weight percent aluminum packs, gaseous diffusion controlled coating formation.

Corrosion Inhibition in High Temperature Environment

DTIC Science & Technology

1993-06-28

levels of sodium , sulfur, and vanadium. Low quality 12 marine residual fuels, for example, may contain up to 0.2 weight 13 percent ash which contains...appreciable amounts of sodium , up to 5 14 weight percent sulfur and up to 0.06 weight percent or 600 ppm 15 vanadium. Low grades of marine distillate...fuels are allowed up to 16 0.05 weight percent ash which contains appreciable amounts of 17 sodium , up to 2 weight percent sulfur and up to 100 ppm

Design synthesis and optimization of joined-wing transports

NASA Technical Reports Server (NTRS)

Gallman, John W.; Smith, Stephen C.; Kroo, Ilan M.

1990-01-01

A computer program for aircraft synthesis using a numerical optimizer was developed to study the application of the joined-wing configuration to transport aircraft. The structural design algorithm included the effects of secondary bending moments to investigate the possibility of tail buckling and to design joined wings resistant to buckling. The structural weight computed using this method was combined with a statistically-based method to obtain realistic estimates of total lifting surface weight and aircraft empty weight. A variety of 'optimum' joined-wing and conventional aircraft designs were compared on the basis of direct operating cost, gross weight, and cruise drag. The most promising joined-wing designs were found to have a joint location at about 70 percent of the wing semispan. The optimum joined-wing transport is shown to save 1.7 percent in direct operating cost and 11 percent in drag for a 2000 nautical mile transport mission.

Condensed tannin-sulfonate derivatives in cold-setting wood-laminating adhesives

Treesearch

Roland E. Kreibich; Richard W. Hemingway

1987-01-01

Extraction of southern pine bark with 4.0 percent sodium sulfite and 0.4-percent sodium carbonate(based on ovendry bark weight) gives epicatechin-(4β)-sulfonate and oligomeric procyanidin-4-sulfonatee that show great promise to replace about 50 percent of the phenol-resorcinol-formaldehyde resin in coldsetting wood-laminating adhesives. Bonds in Douglas-fir...

Insurance-mandated medical weight management before bariatric surgery.

PubMed

Horwitz, Daniel; Saunders, John K; Ude-Welcome, Akuezunkpa; Parikh, Manish

2016-01-01

Many insurance companies require a medical weight management (MWM) program as a prerequisite for approval for bariatric surgery. There is debate regarding the benefit of this requirement. The objective of this study is to assess the effect of insurance-mandated MWM programs on weight loss outcomes in our bariatric surgery population. To assess the effect of insurance-mandated MWM programs on weight loss outcomes in our bariatric surgery population. University. A retrospective review of all bariatric surgery cases performed between 2009 and 2013 was conducted. Patients were stratified by payor mix based on whether the insurance company required MWM. To control for differences between groups, a bucket matching algorithm was used to match patients based on gender, age, body mass index (BMI), and surgery type (sleeve gastrectomy, gastric bypass, or gastric band). A repeated-measures regression model was created to estimate percent excess weight loss, percent excess BMI loss, and percent total weight loss. A total of 1432 bariatric surgery patients were reviewed. The bucket-matching algorithm resulted in 560 patients for final analysis. Mean age and BMI were 41 years and 43 kg/m(2), respectively, and 91% were female. The regression model found no significant differences in weight loss outcomes between the MWM group and the comparison group at 1 year and 2 years-percent total weight loss: 21.3% [95% confidence interval [CI] 20.6%-22.1%] versus 20.2% [95%CI 19.7%-20.6%) at 1 year and 23.4% [95%CI 22.6%-24.3%] versus 21.5% [95%CI 21.0%-22.0%] at 2 years. There was no difference in weight loss outcomes up to 2 years in patients who required insurance-mandated MWM programs. Longer-term studies are needed to determine the benefit of this insurance requirement. Copyright © 2016 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

75 FR 6631 - Stainless Steel Sheet and Strip in Coils from Japan: Final Results of Antidumping Duty...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-10

... and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent or less..., phosphorus of no more than 0.045 percent, sulfur of no more than 0.03 percent, lanthanum of less than 0.002... weight, 0.05 percent or less, with phosphorus and sulfur each comprising, by weight, 0.03 percent or less...

Eccentric exercise training as a countermeasure to non-weight-bearing soleus muscle atrophy

NASA Technical Reports Server (NTRS)

Kirby, Christopher R.; Ryan, Mirelle J.; Booth, Frank W.

1992-01-01

This investigation tested whether eccentric resistance training could prevent soleus muscle atrophy during non-weight bearing. Adult female rats were randomly assigned to either weight bearing +/- intramuscular electrodes or non-weight bearing +/- intramuscular electrodes groups. Electrically stimulated maximal eccentric contractions were performed on anesthetized animals at 48-h intervals during the 10-day experiment. Non-weight bearing significantly reduced soleus muscle wet weight (28-31 percent) and noncollagenous protein content (30-31 percent) compared with controls. Eccentric exercise training during non-weight bearing attenuated but did not prevent the loss of soleus muscle wet weight and noncollagenous protein by 77 and 44 percent, respectively. The potential of eccentric exercise training as an effective and highly efficient counter-measure to non-weight-bearing atrophy is demonstrated in the 44 percent attenuation of soleus muscle noncollagenous protein loss by eccentric exercise during only 0.035 percent of the total non-weight-bearing time period.

12 CFR 324.152 - Simple risk weight approach (SRWA).

Code of Federal Regulations, 2014 CFR

2014-01-01

... (that is, between zero and -1), then E equals the absolute value of RVC. If RVC is negative and less... the lowest applicable risk weight in this section. (1) Zero percent risk weight equity exposures. An....131(d)(2) is assigned a zero percent risk weight. (2) 20 percent risk weight equity exposures. An...

Ineffectiveness of commercial weight-loss programs for achieving modest but meaningful weight loss: Systematic review and meta-analysis.

PubMed

McEvedy, Samantha M; Sullivan-Mort, Gillian; McLean, Siân A; Pascoe, Michaela C; Paxton, Susan J

2017-10-01

This study collates existing evidence regarding weight loss among overweight but otherwise healthy adults who use commercial weight-loss programs. Systematic search of 3 databases identified 11 randomized controlled trials and 14 observational studies of commercial meal-replacement, calorie-counting, or pre-packaged meal programs which met inclusion criteria. In meta-analysis using intention-to-treat data, 57 percent of individuals who commenced a commercial weight program lost less than 5 percent of their initial body weight. One in two (49%) studies reported attrition ≥30 percent. A second meta-analysis found that 37 percent of program completers lost less than 5 percent of initial body weight. We conclude that commercial weight-loss programs frequently fail to produce modest but clinically meaningful weight loss with high rates of attrition suggesting that many consumers find dietary changes required by these programs unsustainable.

Predictive factors of weight regain following laparoscopic Roux-en-Y gastric bypass.

PubMed

Keith, Charles J; Gullick, Allison A; Feng, Katey; Richman, Joshua; Stahl, Richard; Grams, Jayleen

2018-05-01

Strategies to address weight recidivism following Roux-en-Y gastric bypass (RYGB) could be developed if patients at risk were identified in advance. This study aimed to determine factors that predict weight regain. Retrospective review was performed of patients who underwent laparoscopic RYGB at a single institution over 10 years. Group-based modeling was used to estimate trajectories of weight regain after nadir and stratify patients based on percent weight change (%WC). Three trajectories were identified from 586 patients: 121 had ongoing weight loss, 343 were weight stable, and 122 regained weight. Male sex (p = 0.020) and white race (p < 0.001) were associated with stable weight or weight regain. Being from a neighborhood of socioeconomic advantage (p = 0.035) was associated with weight regain. Patients with weight regain experienced improved percent weight loss (%WL) at nadir (p < 0.001) and ΔBMI (p = 0.002), yet they had higher weight and BMI and lower %WL and ΔBMI than the other two groups during long-term follow-up. On multivariate analyses, those who regained weight were more likely from socioeconomically advantaged neighborhoods (OR 1.82, CI 1.18-2.79). Several patient-related characteristics predicted an increased likelihood of weight regain. Further studies are needed to elucidate how these factors contribute to weight recidivism following bariatric surgery.

Cost-effectiveness of family-based group treatment for child and parental obesity.

PubMed

Epstein, Leonard H; Paluch, Rocco A; Wrotniak, Brian H; Daniel, Tinuke Oluyomi; Kilanowski, Colleen; Wilfley, Denise; Finkelstein, Eric

2014-04-01

Obesity runs in families, and family-based behavioral treatment (FBT) is associated with weight loss in overweight/obese children and their overweight/obese parents. This study was designed to estimate the costs and cost-effectiveness of FBT compared to separate group treatments of the overweight/obese parent and child (PC). Fifty overweight/obese 8- to 12-year-old children with overweight/obese parents were randomly assigned to 12 months of either FBT or PC treatment program. Assessment of societal costs (payer plus opportunity costs) were completed based on two assumptions: (1) programs for parent and child were available on separate days (PC-1) or (2) interventions for parent and child were available in the same location at sequential times on the same day (PC-2). Cost-effectiveness was calculated based on societal cost per unit of change using percent overBMI for children and weight for parents. The average societal cost per family was $1,448 for FBT and $2,260 for PC-1 (p < 0.001) and $2,124 for PC-2 (p < 0.001). Child cost-effectiveness for FBT was $209.17/percent overBMI, compared to $1,036.50/percent overBMI for PC-1 and $973.98/percent overBMI for PC-2. Parent cost-effectiveness was $132.97/pound (lb) for FBT and $373.53/lb (PC-1) or $351.00/lb (PC-2). For families with overweight/obese children and parents, FBT presents a lower cost per unit of weight loss for parents and children than treating the parent and child separately. Given the high rates of pediatric and adult obesity, FBT may provide a unique cost-effective platform for obesity intervention that alters weight in overweight/obese parents and their overweight/obese children.

A photographic utilization guide for key riparian graminoids

Treesearch

John W. Kinney; Warren P. Clary

1994-01-01

Photographic guides are presented to help estimate grazing utilization of important riparian grasses and grasslike plants. Graphs showing the percent of a plant's weight that has been consumed based on the percent of its height left after grazing allow utilization estimates to be refined further.

12 CFR 3.152 - Simple risk weight approach (SRWA).

Code of Federal Regulations, 2014 CFR

2014-01-01

... applicable risk weight in this section. (1) Zero percent risk weight equity exposures. An equity exposure to... assigned a zero percent risk weight. (2) 20 percent risk weight equity exposures. An equity exposure to a... equals zero. If RVC is negative and greater than or equal to -1 (that is, between zero and -1), then E...

A Protection And Detection Surface (PADS) for damage tolerance

NASA Technical Reports Server (NTRS)

Shuart, M. J.; Prasad, C. B.; Biggers, S. B.

1990-01-01

A protection and detection surface (PADS) concept was studied for application to composite primary aircraft structures. A Kevlar-epoxy woven face sheet with a Rohacell foam core was found to be the most effective PADS configuration among the configurations evaluated. The weight of the PADS configuration was estimated to be approximately 17 percent of the structural weight. The PADS configuration was bonded to graphite-epoxy base laminates, and up to a 70 percent improvement in compression-after-impact failure strains was observed.

27 CFR 21.105 - Citronella oil, natural.

Code of Federal Regulations, 2010 CFR

2010-04-01

... percent by weight. (2) Aldehyde content (as Citronellal). Not less than 30 percent by weight. (3...) Aldehyde content (as Citronellal). Not less than 7 percent by weight. (3) Refractive index at 20 °C. 1.4790...

27 CFR 21.105 - Citronella oil, natural.

Code of Federal Regulations, 2013 CFR

2013-04-01

... percent by weight. (2) Aldehyde content (as Citronellal). Not less than 30 percent by weight. (3...) Aldehyde content (as Citronellal). Not less than 7 percent by weight. (3) Refractive index at 20 °C. 1.4790...

27 CFR 21.105 - Citronella oil, natural.

Code of Federal Regulations, 2012 CFR

2012-04-01

... percent by weight. (2) Aldehyde content (as Citronellal). Not less than 30 percent by weight. (3...) Aldehyde content (as Citronellal). Not less than 7 percent by weight. (3) Refractive index at 20 °C. 1.4790...

27 CFR 21.105 - Citronella oil, natural.

Code of Federal Regulations, 2014 CFR

2014-04-01

... percent by weight. (2) Aldehyde content (as Citronellal). Not less than 30 percent by weight. (3...) Aldehyde content (as Citronellal). Not less than 7 percent by weight. (3) Refractive index at 20 °C. 1.4790...

27 CFR 21.105 - Citronella oil, natural.

Code of Federal Regulations, 2011 CFR

2011-04-01

... percent by weight. (2) Aldehyde content (as Citronellal). Not less than 30 percent by weight. (3...) Aldehyde content (as Citronellal). Not less than 7 percent by weight. (3) Refractive index at 20 °C. 1.4790...

Methods for estimating flood frequency in Montana based on data through water year 1998

USGS Publications Warehouse

Parrett, Charles; Johnson, Dave R.

2004-01-01

Annual peak discharges having recurrence intervals of 2, 5, 10, 25, 50, 100, 200, and 500 years (T-year floods) were determined for 660 gaged sites in Montana and in adjacent areas of Idaho, Wyoming, and Canada, based on data through water year 1998. The updated flood-frequency information was subsequently used in regression analyses, either ordinary or generalized least squares, to develop equations relating T-year floods to various basin and climatic characteristics, equations relating T-year floods to active-channel width, and equations relating T-year floods to bankfull width. The equations can be used to estimate flood frequency at ungaged sites. Montana was divided into eight regions, within which flood characteristics were considered to be reasonably homogeneous, and the three sets of regression equations were developed for each region. A measure of the overall reliability of the regression equations is the average standard error of prediction. The average standard errors of prediction for the equations based on basin and climatic characteristics ranged from 37.4 percent to 134.1 percent. Average standard errors of prediction for the equations based on active-channel width ranged from 57.2 percent to 141.3 percent. Average standard errors of prediction for the equations based on bankfull width ranged from 63.1 percent to 155.5 percent. In most regions, the equations based on basin and climatic characteristics generally had smaller average standard errors of prediction than equations based on active-channel or bankfull width. An exception was the Southeast Plains Region, where all equations based on active-channel width had smaller average standard errors of prediction than equations based on basin and climatic characteristics or bankfull width. Methods for weighting estimates derived from the basin- and climatic-characteristic equations and the channel-width equations also were developed. The weights were based on the cross correlation of residuals from the different methods and the average standard errors of prediction. When all three methods were combined, the average standard errors of prediction ranged from 37.4 percent to 120.2 percent. Weighting of estimates reduced the standard errors of prediction for all T-year flood estimates in four regions, reduced the standard errors of prediction for some T-year flood estimates in two regions, and provided no reduction in average standard error of prediction in two regions. A computer program for solving the regression equations, weighting estimates, and determining reliability of individual estimates was developed and placed on the USGS Montana District World Wide Web page. A new regression method, termed Region of Influence regression, also was tested. Test results indicated that the Region of Influence method was not as reliable as the regional equations based on generalized least squares regression. Two additional methods for estimating flood frequency at ungaged sites located on the same streams as gaged sites also are described. The first method, based on a drainage-area-ratio adjustment, is intended for use on streams where the ungaged site of interest is located near a gaged site. The second method, based on interpolation between gaged sites, is intended for use on streams that have two or more streamflow-gaging stations.

75 FR 62101 - Stainless Steel Sheet and Strip in Coils From the Republic of Korea: Final Results of Expedited...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-07

... and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent or less..., phosphorus of no more than 0.045 percent, sulfur of no more than 0.03 percent, lanthanum of less than 0.002... comprise, by weight, 0.05 percent or less, with phosphorus and sulfur each comprising, by weight, 0.03...

Combined oral contraceptives and body weight: do oral contraceptives cause weight gain? A primate model.

PubMed

Edelman, A; Jensen, J T; Bulechowsky, M; Cameron, J

2011-02-01

The aim of this study was to determine if oral contraceptive (OC) use affects body weight, body composition and metabolism in primates. Reproductive-age female rhesus monkeys of normal and obese BMI were studied to document baseline weight stability, then treated continuously with an OC (dosed to achieve equivalent human serum levels for a 30 µg ethinyl estradiol/150 µg levonorgestrel preparation) for 237 days. Monkeys were monitored for changes in body weight, levels of physical activity (measured by a triaxial Actical accelerometer), food/caloric intake, percent body fat (dual energy X-ray absorptiometry, DEXA) and metabolism (24 h metabolic rate and serum metabolic substrate and hormone concentrations). All 10 monkeys completed the study protocol with no adverse events. While body weight (-0.73% change) and percent body fat (-1.78% change) of the normal BMI group did not significantly decrease from baseline, obese monkeys showed a significant decrease in body weight (-8.58% change, P < 0.01) and percent body fat (-12.13% change P = 0.02) with OC treatment. In both the obese (P = 0.03) and the normal BMI (P = 0.01) groups, there was a significant increase in basal metabolic rate with OC use. No changes were seen in food intake, activity level or % lean muscle mass with OC use for either BMI-based group. Overall, OC use appears to cause a slight increase in basal metabolic rate in female monkeys, leading to a decrease in body weight and percent body fat in obese individuals.

12 CFR 167.6 - Risk-based capital credit risk-weight categories.

Code of Federal Regulations, 2014 CFR

2014-01-01

.... (iii) 50 percent Risk Weight (Category 3). (A) Revenue bonds issued by any public-sector entity in an....g., industrial development bonds; (J) Debt securities not otherwise described in this section; (K... interest rate risk of its government bond portfolio will not increase the risk weight of that fund above...

Modelling global methane emissions from livestock: Biological and nutritional controls

NASA Technical Reports Server (NTRS)

Johnson, Donald E.

1992-01-01

The available observations of methane production from the literature have been compiled into a ruminant methane data base. This data base includes 400 treatment mean observations of methane losses from cattle and sheep, and minor numbers of measurements from other species. Methane loss varied from 2.0 to 11.6 percent of dietary gross energy. Measurements included describe the many different weights and physiological states of the animals fed and diets ranging from all forage to all concentrate diets or mixtures. An auxiliary spreadsheet lists approximately 1000 individual animal observations. Many important concepts have emerged from our query and analysis of this data set. The majority of the world's cattle, sheep, and goats under normal husbandry circumstances likely produce methane very close to 6 percent of their daily diets gross energy (2 percent of the diet by weight). Although individual animals or losses from specific dietary research circumstances can vary considerably, the average for the vast majority of groups of ruminant livestock are likely to fall between 5.5 to 6.5 percent. We must caution, however, that little experimental data is available for two-thirds of the world's ruminants in developing countries. Available evidence suggests similar percentage of emissions, but this supposition needs confirmation. More importantly, data is skimpy or unavailable to describe diet consumption, animal weight, and class distribution.

Metallized Gelled Propellants: Oxygen/RP-1/Aluminum Rocket Heat Transfer and Combustion Measurements

NASA Technical Reports Server (NTRS)

Palaszewski, Bryan; Zakany, James S.

1996-01-01

A series of rocket engine heat transfer experiments using metallized gelled liquid propellants was conducted. These experiments used a small 20- to 40-lb/f thrust engine composed of a modular injector, igniter, chamber and nozzle. The fuels used were traditional liquid RP-1 and gelled RP-1 with 0-, 5-, and 55-percentage by weight loadings of aluminum particles. Gaseous oxygen was used as the oxidizer. Three different injectors were used during the testing: one for the baseline O(2)/RP-1 tests and two for the gelled and metallized gelled fuel firings. Heat transfer measurements were made with a rocket engine calorimeter chamber and nozzle with a total of 31 cooling channels. Each chamber used a water flow to carry heat away from the chamber and the attached thermocouples and flow meters allowed heat flux estimates at each of the 31 stations. The rocket engine Cstar efficiency for the RP-1 fuel was in the 65-69 percent range, while the gelled 0 percent by weight RP-1 and the 5-percent by weight RP-1 exhibited a Cstar efficiency range of 60 to 62% and 65 to 67%, respectively. The 55-percent by weight RP-1 fuel delivered a 42-47% Cstar efficiency. Comparisons of the heat flux and temperature profiles of the RP-1 and the metallized gelled RP-1/A1 fuels show that the peak nozzle heat fluxes with the metallized gelled O2/RP-1/A1 propellants are substantially higher than the baseline O2/RP-1: up to double the flux for the 55 percent by weight RP-1/A1 over the RP-1 fuel. Analyses showed that the heat transfer to the wall was significantly different for the RP-1/A1 at 55-percent by weight versus the RP-1 fuel. Also, a gellant and an aluminum combustion delay was inferred in the 0 percent and 5-percent by weight RP-1/A1 cases from the decrease in heat flux in the first part of the chamber. A large decrease in heat flux in the last half of the chamber was caused by fuel deposition in the chamber and nozzle. The engine combustion occurred well downstream of the injector face based on the heat flux estimates from the temperature measurements.

Extinguishing agent for combustible metal fires

DOEpatents

Riley, John F.; Stauffer, Edgar Eugene

1976-10-12

A low chloride extinguishing agent for combustible metal fires comprising from substantially 75 to substantially 94 weight percent of sodium carbonate as the basic fire extinguishing material, from substantially 1 to substantially 5 weight percent of a water-repellent agent such as a metal stearate, from substantially 2 to substantially 10 weight percent of a flow promoting agent such as attapulgus clay, and from substantially 3 to substantially 15 weight percent of a polyamide resin as a crusting agent.

Comparing Weight Loss-Maintenance Outcomes of a Worksite-Based Lifestyle Program Delivered via DVD and Face-to-Face: A Randomized Trial.

PubMed

Ing, Claire Townsend; Miyamoto, Robin E S; Fang, Rui; Antonio, Mapuana; Paloma, Diane; Braun, Kathryn L; Kaholokula, Joseph Keawe'aimoku

2018-03-01

Native Hawaiians and other Pacific Islanders have high rates of overweight and obesity compared with other ethnic groups in Hawai'i. Effective weight loss and weight loss-maintenance programs are needed to address obesity and obesity-related health inequities for this group. Compare the effectiveness of a 9-month, worksite-based, weight loss-maintenance intervention delivered via DVD versus face-to-face in continued weight reduction and weight loss maintenance beyond the initial weight loss phase. We tested DVD versus face-to-face delivery of the PILI@Work Program's 9-month, weight loss-maintenance phase in Native Hawaiian-serving organizations. After completing the 3-month weight loss phase, participants ( n = 217) were randomized to receive the weight loss-maintenance phase delivered via trained peer facilitators or DVDs. Participant assessments at randomization and postintervention included weight, height, blood pressure, physical functioning, exercise frequency, and fat intake. Eighty-three face-to-face participants were retained at 12 months (74.1%) compared with 73 DVD participants (69.5%). There was no significant difference between groups in weight loss or weight loss maintenance. The number of lessons attended in Phase 1 of the intervention (β = 0.358, p = .022) and baseline systolic blood pressure (β = -0.038, p = .048) predicted percent weight loss at 12 months. Weight loss maintenance was similar across groups. This suggests that low-cost delivery methods for worksite-based interventions targeting at-risk populations can help address obesity and obesity-related disparities. Additionally, attendance during the weight loss phase and lower baseline systolic blood pressure predicted greater percent weight loss during the weight loss-maintenance phase, suggesting that early engagement and initial physical functioning improve long-term weight loss outcomes.

7 CFR 2902.29 - Disposable cutlery.

Code of Federal Regulations, 2010 CFR

2010-01-01

... biobased content of at least 48 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. (c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with...

7 CFR 2902.39 - Floor strippers.

Code of Federal Regulations, 2010 CFR

2010-01-01

... biobased content of at least 78 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. (c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with...

Resumption of menses in anorexia nervosa during a course of family-based treatment

PubMed Central

2013-01-01

Background The resumption of menses (ROM) is considered an important clinical marker in weight restoration for patients with anorexia nervosa (AN). The purpose of this study was to examine ROM in relation to expected body weight (EBW) and psychosocial markers in adolescents with AN. Methods We conducted a retrospective chart review at The University of Chicago Eating Disorders Program from September 2001 to September 2011 (N = 225 females with AN). Eighty-four adolescents (Mean age = 15.1, SD = 2.2) with a DSM-IV diagnosis of AN, presenting with secondary amenorrhea were identified. All participants had received a course of outpatient family-based treatment (FBT), i.e., ~20 sessions over 12 months. Weight and menstrual status were tracked at each therapy session throughout treatment. The primary outcome measures were weight (percent of expected for sex, age and height), and ROM. Results Mean percent EBW at baseline was 82.0 (SD = 6.5). ROM was reported by 67.9% of participants (57/84), on average at 94.9 (SD = 9.3) percent EBW, and after having completed an average of 13.5 (SD = 10.7) FBT sessions (~70% of standard FBT). Compared to participants without ROM by treatment completion, those with ROM had significantly higher baseline Eating Disorder Examination Global scores (p = .004) as well as Shape Concern (p < .008) and Restraint (p < .002) subscale scores. No other differences were found. Conclusions Results suggest that ROM occur at weights close to the reference norms for percent EBW, and that high pre-treatment eating disorder psychopathology is associated with ROM. Future research will be important to better understand these differences and their implications for the treatment of adolescents with AN. PMID:24926411

76 FR 49726 - Continuation of Antidumping and Countervailing Duty Orders: Stainless Steel Sheet and Strip in...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-11

... between 0.20 and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent... percent, phosphorus of no more than 0.045 percent, sulfur of no more than 0.03 percent, lanthanum of less....05 percent or less, with phosphorus and sulfur each comprising, by weight, 0.03 percent or less. This...

75 FR 76700 - Stainless Steel Sheet and Strip in Coils From Taiwan: Final Results of Antidumping Duty...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-09

... percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent or less, silicon of... percent, phosphorus of no more than 0.045 percent, sulfur of no more than 0.03 percent, lanthanum of less....05 percent or less, with phosphorus and sulfur each comprising, by weight, 0.03 percent or less. This...

Coking and gasification process

DOEpatents

Billimoria, Rustom M.; Tao, Frank F.

1986-01-01

An improved coking process for normally solid carbonaceous materials wherein the yield of liquid product from the coker is increased by adding ammonia or an ammonia precursor to the coker. The invention is particularly useful in a process wherein coal liquefaction bottoms are coked to produce both a liquid and a gaseous product. Broadly, ammonia or an ammonia precursor is added to the coker ranging from about 1 to about 60 weight percent based on normally solid carbonaceous material and is preferably added in an amount from about 2 to about 15 weight percent.

12 CFR 217.52 - Simple risk-weight approach (SRWA).

Code of Federal Regulations, 2014 CFR

2014-01-01

... greater than or equal to −1 (that is, between zero and −1), then E equals the absolute value of RVC. If... this section) by the lowest applicable risk weight in this paragraph (b). (1) Zero percent risk weight... credit exposures receive a zero percent risk weight under § 217.32 may be assigned a zero percent risk...

Patterns of postnatal weight changes in infants with very low and extremely low birth weights.

PubMed

Smith, S L; Kirchhoff, K T; Chan, G M; Squire, S J

1994-01-01

To describe (1) short-term postnatal weight loss and gain patterns in infants with very low and extremely low birth weights and (2) the variables that may affect these weight change patterns. Descriptive, retrospective review. University hospital in the intermountain western United States. Sixty-two charts of infants admitted to a university neonatal intensive care unit from July 1990 through November 1992 were reviewed. Infants who weighed 1000 grams or less were categorized as extremely low birth weight (ELBW) and infants weighing 1001 to 1500 grams were categorized as very low birth weight (VLBW). Each group was comprised of 31 infants. Fifty percent of the sample were male, and 50% were female. Eighty-five percent of the sample were Anglo-American, and 15% were non-Anglo-American. Data were collected on a three-part data collection tool and included demographic and treatment variables. A significant difference was found in the maximum percent weight lost between the two groups, with the ELBW group losing a mean of 14.77% of birth weight and the VLBW group losing a mean of 11.35% of birth weight (t = 2.45, p < 0.05). The day the infants reached their nadir weight was significantly different between the two groups. The ELBW group reached their nadir on day of life 7, and the VLBW group reached their nadir on day of life 6 (t = 2.00, p < 0.05). No significant difference was noted in the time to return to birth weight between the two groups, with a mean of 15 days to return to birth weight. Factors associated with postnatal weight changes were intraventricular hemorrhage, use of diuretics and steroids, day of life when nadir weight occurred, and maximum percent of weight lost. Many of the independent variables were significantly interrelated to each other (r = -0.90 to r = 0.91, p < 0.01 to p < 0.001). However, only the variables that correlated with time to return to birth weight were entered into the regression analysis. These variables included number of days diuretics were given before return to birth weight, maximum percent of weight lost, and day of life the infants reached their nadir weight. Number of days diuretics were given before return to birth weight correlated significantly with time to return to birth weight (r = 0.77, F = 26.66, p < 0.0001) although maximum percent of weight lost and day of life the infants reached their nadir weight had a minimal effect. Further research into the effects of diuretic therapy on weight changes in this population of infants may lead to interventions to minimize the negative effects of diuretics on return to birth weight. In addition, the older growth charts may not be applicable to this population of infants. Generation of new growth charts that provide growth curves based on these data could be useful in developing nutritional therapies that would promote growth and possibly decrease the length of hospital stay for these infants.

7 CFR 981.401 - Adjusted kernel weight.

Code of Federal Regulations, 2012 CFR

2012-01-01

... based on the analysis of a 1,000 gram sample taken from a lot of almonds weighing 10,000 pounds with less than 95 percent kernels, and a 1,000 gram sample taken from a lot of almonds weighing 10,000... percent kernels containing the following: Edible kernels, 530 grams; inedible kernels, 120 grams; foreign...

7 CFR 981.401 - Adjusted kernel weight.

Code of Federal Regulations, 2011 CFR

2011-01-01

... based on the analysis of a 1,000 gram sample taken from a lot of almonds weighing 10,000 pounds with less than 95 percent kernels, and a 1,000 gram sample taken from a lot of almonds weighing 10,000... percent kernels containing the following: Edible kernels, 530 grams; inedible kernels, 120 grams; foreign...

7 CFR 981.401 - Adjusted kernel weight.

Code of Federal Regulations, 2013 CFR

2013-01-01

... based on the analysis of a 1,000 gram sample taken from a lot of almonds weighing 10,000 pounds with less than 95 percent kernels, and a 1,000 gram sample taken from a lot of almonds weighing 10,000... percent kernels containing the following: Edible kernels, 530 grams; inedible kernels, 120 grams; foreign...

7 CFR 981.401 - Adjusted kernel weight.

Code of Federal Regulations, 2010 CFR

2010-01-01

... based on the analysis of a 1,000 gram sample taken from a lot of almonds weighing 10,000 pounds with less than 95 percent kernels, and a 1,000 gram sample taken from a lot of almonds weighing 10,000... percent kernels containing the following: Edible kernels, 530 grams; inedible kernels, 120 grams; foreign...

7 CFR 981.401 - Adjusted kernel weight.

Code of Federal Regulations, 2014 CFR

2014-01-01

... based on the analysis of a 1,000 gram sample taken from a lot of almonds weighing 10,000 pounds with less than 95 percent kernels, and a 1,000 gram sample taken from a lot of almonds weighing 10,000... percent kernels containing the following: Edible kernels, 530 grams; inedible kernels, 120 grams; foreign...

7 CFR 2902.35 - Bathroom and spa cleaners.

Code of Federal Regulations, 2010 CFR

2010-01-01

... least 74 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. (c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a...

7 CFR 2902.16 - Adhesive and mastic removers.

Code of Federal Regulations, 2010 CFR

2010-01-01

... biobased content of at least 58 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. (c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with...

Smoking cessation: barriers to success and readiness to change.

PubMed

Guirguis, Alexander B; Ray, Shaunta M; Zingone, Michelle M; Airee, Anita; Franks, Andrea S; Keenum, Amy J

2010-10-01

Smoking cessation interventions should be individualized based on patient history and readiness for change. The objective of this study was to assess stages of change and key components of smoking and cessation history among a sample of primary care patients. A telephone survey of current or recent smokers identified smoking status, stage of change, motivation, concerns, relapse history, pharmacotherapy, and social support. Of 150 participants, most were within precontemplation (22.7 percent) or contemplation (44.0 percent) stages of change; 14.0 percent were in preparation, 4.7 percent in action, and 14.7 percent in maintenance. The primary motivation for quitting was to improve general health (42.3 percent). The most common cessation-related concerns were: breaking the habit, stress, and weight gain. Pharmacotherapy was discontinued due to adverse events in 31.5 percent of users. Intratreatment social support was reported by 17.5 percent. The most common reasons for relapse were falling back into the habit (36 percent), stressful situations (27 percent), and being around other smokers (25 percent). Targeted interventions are needed for patients in either precontemplation or contemplation stages. Counseling should focus on helping patients resolve barriers to cessation and reasons for relapse, particularly stress and weight management. Pharmacotherapy should be utilized when patients are ready to quit. Increased intratreatment social support and counseling appear warranted to support behavior change and appropriate medication use.

7 CFR 51.1586 - Serious damage.

Code of Federal Regulations, 2011 CFR

2011-01-01

... of more than 10 percent of the total weight of the potato including peel covering defective area. Any... percent of the total weight of the potato including peel covering defective area. (b) Shriveling, when the... percent of the total weight of the potato including peel covering defective area. (e) Wireworm, grass root...

7 CFR 51.1586 - Serious damage.

Code of Federal Regulations, 2010 CFR

2010-01-01

... of more than 10 percent of the total weight of the potato including peel covering defective area. Any... percent of the total weight of the potato including peel covering defective area. (b) Shriveling, when the... percent of the total weight of the potato including peel covering defective area. (e) Wireworm, grass root...

12 CFR 3.37 - Collateralized transactions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... this section: (i) A national bank or Federal savings association may assign a zero percent risk weight... qualifies for a zero percent risk weight under § 3.32. (iii) A national bank or Federal savings association may assign a zero percent risk weight to the collateralized portion of an exposure where: (A) The...

40 CFR 98.183 - Calculating GHG emissions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... = Carbon content of the lead ore, from the carbon analysis results (percent by weight, expressed as a... = Carbon content of the lead scrap, from the carbon analysis (percent by weight, expressed as a decimal... (tons). CFlux = Carbon content of the flux materials, from the carbon analysis (percent by weight...

Iron aluminide alloy container for solid oxide fuel cells

DOEpatents

Judkins, Roddie Reagan; Singh, Prabhakar; Sikka, Vinod Kumar

2000-01-01

A container for fuel cells is made from an iron aluminide alloy. The container alloy preferably includes from about 13 to about 22 weight percent Al, from about 2 to about 8 weight percent Cr, from about 0.1 to about 4 weight percent M selected from Zr and Hf, from about 0.005 to about 0.5 weight percent B or from about 0.001 to about 1 weight percent C, and the balance Fe and incidental impurities. The iron aluminide container alloy is extremely resistant to corrosion and metal loss when exposed to dual reducing and oxidizing atmospheres at elevated temperatures. The alloy is particularly useful for containment vessels for solid oxide fuel cells, as a replacement for stainless steel alloys which are currently used.

KSC-03PD-1072

NASA Technical Reports Server (NTRS)

2003-01-01

KENNEDY SPACE CENTER, FLA. -- Workers continue to place pieces of Columbia debris on the floor of the KSC RLV Hangar. Shipped from Barksdale Air Force Base, Shreveport, La., more than 70,000 items, weighing 78,000 pounds, about 36 percent of the Shuttle by weight, have been delivered to KSC for use in the mishap investigation. Ground teams have completed 78 percent of their primary search area, and airborne crews finished 80 percent of their assigned area. Search teams have completed 98 percent of the underwater searches in Lake Nacogdoches and Toledo Bend Reservoir.

KSC-03PD-1074

NASA Technical Reports Server (NTRS)

2003-01-01

KENNEDY SPACE CENTER, FLA. -- A worker in the KSC RLV Hangar, collection site of the debris from Columbia, examines a recovered piece before bagging it. Shipped from Barksdale Air Force Base, Shreveport, La., more than 70,000 items, weighing 78,000 pounds, about 36 percent of the Shuttle by weight, have been delivered to KSC for use in the mishap investigation. Ground teams have completed 78 percent of their primary search area, and airborne crews finished 80 percent of their assigned area. Search teams have completed 98 percent of the underwater searches in Lake Nacogdoches and Toledo Bend Reservoir.

KSC-03PD-1077

NASA Technical Reports Server (NTRS)

2003-01-01

KENNEDY SPACE CENTER, FLA. -- Members of the Columbia Reconstruction Project Team look over pieces of debris on the floor of the KSC RLV Hangar. Shipped from Barksdale Air Force Base, Shreveport, La., more than 70,000 items, weighing 78,000 pounds, about 36 percent of the Shuttle by weight, have been delivered to KSC for use in the mishap investigation. Ground teams have completed 78 percent of their primary search area, and airborne crews finished 80 percent of their assigned area. Search teams have completed 98 percent of the underwater searches in Lake Nacogdoches and Toledo Bend Reservoir.

KSC-03PD-1073

NASA Technical Reports Server (NTRS)

2003-01-01

KENNEDY SPACE CENTER, FLA. -- Debris pieces of all sizes lie on the floor of the KSC RLV Hangar. Shipped from Barksdale Air Force Base, Shreveport, La., more than 70,000 items, weighing 78,000 pounds, about 36 percent of the Shuttle by weight, have been delivered to KSC for use in the mishap investigation. Ground teams have completed 78 percent of their primary search area, and airborne crews finished 80 percent of their assigned area. Search teams have completed 98 percent of the underwater searches in Lake Nacogdoches and Toledo Bend Reservoir.

KSC-03PD-1075

NASA Technical Reports Server (NTRS)

2003-01-01

KENNEDY SPACE CENTER, FLA. -- Members of the Columbia Reconstruction Project Team look over pieces of debris in the KSC RLV Hangar. Shipped from Barksdale Air Force Base, Shreveport, La., more than 70,000 items, weighing 78,000 pounds, about 36 percent of the Shuttle by weight, have been delivered to KSC for use in the mishap investigation. Ground teams have completed 78 percent of their primary search area, and airborne crews finished 80 percent of their assigned area. Search teams have completed 98 percent of the underwater searches in Lake Nacogdoches and Toledo Bend Reservoir.

KSC-03pd1074

NASA Image and Video Library

2003-04-14

KENNEDY SPACE CENTER, FLA. -- A worker in the KSC RLV Hangar, collection site of the debris from Columbia, examines a recovered piece before bagging it. Shipped from Barksdale Air Force Base, Shreveport, La., more than 70,000 items, weighing 78,000 pounds, about 36 percent of the Shuttle by weight, have been delivered to KSC for use in the mishap investigation. Ground teams have completed 78 percent of their primary search area, and airborne crews finished 80 percent of their assigned area. Search teams have completed 98 percent of the underwater searches in Lake Nacogdoches and Toledo Bend Reservoir.

75 FR 6627 - Stainless Steel Sheet and Strip in Coils From Mexico; Final Results of Antidumping Duty...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-10

... between 0.20 and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent... 19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of no more than 0.045 percent..., manganese, silicon and molybdenum each comprise, by weight, 0.05 percent or less, with phosphorus and sulfur...

78 FR 79667 - Stainless Steel Sheet and Strip in Coils From Japan: Initiation of Expedited Changed...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-31

... weight, phosphorus of 0.025 percent or less, silicon of between 0.20 and 0.50 percent, and sulfur of 0... 19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of no more than 0.045 percent..., manganese, silicon and molybdenum each comprise, by weight, 0.05 percent or less, with phosphorus and sulfur...

75 FR 81214 - Stainless Steel Sheet and Strip in Coils From Italy: Preliminary Results of the Full Second Five...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-27

... between 0.20 and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent... 19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of no more than 0.045 percent..., manganese, silicon and molybdenum each comprise, by weight, 0.05 percent or less, with phosphorus and sulfur...

Modelling global methane emissions from livestock: Biological and nutritional controls. Final Report, 1 July 1989-30 June 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, D.E.

1992-10-01

The available observations of methane production from the literature have been compiled into a ruminant methane data base. This data base includes 400 treatment mean observations of methane losses from cattle and sheep, and minor numbers of measurements from other species. Methane loss varied from 2.0 to 11.6 percent of dietary gross energy. Measurements included describe the many different weights and physiological states of the animals fed and diets ranging from all forage to all concentrate diets or mixtures. An auxiliary spreadsheet lists approximately 1000 individual animal observations. Many important concepts have emerged from our query and analysis of thismore » data set. The majority of the world's cattle, sheep, and goats under normal husbandry circumstances likely produce methane very close to 6 percent of their daily diets gross energy (2 percent of the diet by weight). Although individual animals or losses from specific dietary research circumstances can vary considerably, the average for the vast majority of groups of ruminant livestock are likely to fall between 5.5 to 6.5 percent. We must caution, however, that little experimental data is available for two-thirds of the world's ruminants in developing countries. Available evidence suggests similar percentage of emissions, but this supposition needs confirmation. More importantly, data is skimpy or unavailable to describe diet consumption, animal weight, and class distribution.« less

Drop-in substitute for dichlorodifluoromethane refrigerant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goble, G.H.

1993-06-01

A method for producing refrigeration in a refrigeration system designed for a dichlorodifluoromethane refrigerant is described, comprising drop-in substituting for said dichlorodifluoromethane a ternary mixture of about 2 to 20 weight percent isobutane, about 21 to 51 weight percent 1-chloro-1,1-difluoroethane, and about 41 to 71 weight percent chlorodifluoromethane, with the weight percentages of said components being weight percentages of the overall mixture; condensing said ternary mixture; and thereafter evaporating said ternary mixture in the vicinity of a body to be cooled.

7 CFR 52.1845 - Sizes of seedless raisins.

Code of Federal Regulations, 2013 CFR

2013-01-01

... percent, by weight, of all the raisins will pass through round perforations 22/64-inch in diameter, but not more than 10 percent, by weight, of all the raisins may pass through round perforations 20/64-inch... will pass through round perforations 24/64-inch in diameter, and not less than 70 percent, by weight...

7 CFR 52.1845 - Sizes of seedless raisins.

Code of Federal Regulations, 2014 CFR

2014-01-01

... percent, by weight, of all the raisins will pass through round perforations 22/64-inch in diameter, but not more than 10 percent, by weight, of all the raisins may pass through round perforations 20/64-inch... will pass through round perforations 24/64-inch in diameter, and not less than 70 percent, by weight...

7 CFR 52.1846 - Grades of seedless raisins.

Code of Federal Regulations, 2011 CFR

2011-01-01

... more than 18 percent, by weight, of moisture for all varieties of seedless raisins except the Monukka variety, which may contain not more than 19 percent, by weight, of moisture; and that meet the additional...-matured; that contain not more than 18 percent, by weight, of moisture for all varieties of seedless...

7 CFR 52.1846 - Grades of seedless raisins.

Code of Federal Regulations, 2012 CFR

2012-01-01

... more than 18 percent, by weight, of moisture for all varieties of seedless raisins except the Monukka variety, which may contain not more than 19 percent, by weight, of moisture; and that meet the additional...-matured; that contain not more than 18 percent, by weight, of moisture for all varieties of seedless...

12 CFR 324.37 - Collateralized transactions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... institution may assign a zero percent risk weight to an exposure to an OTC derivative contract that is marked... exposure to a sovereign that qualifies for a zero percent risk weight under § 324.32. (iii) An FDIC-supervised institution may assign a zero percent risk weight to the collateralized portion of an exposure...

Design of a large span-distributed load flying-wing cargo airplane with laminar flow control

NASA Technical Reports Server (NTRS)

Lovell, W. A.; Price, J. E.; Quartero, C. B.; Turriziani, R. V.; Washburn, G. F.

1978-01-01

A design study was conducted to add laminar flow control to a previously design span-distributed load airplane while maintaining constant range and payload. With laminar flow control applied to 100 percent of the wing and vertical tail chords, the empty weight increased by 4.2 percent, the drag decreased by 27.4 percent, the required engine thrust decreased by 14.8 percent, and the fuel consumption decreased by 21.8 percent. When laminar flow control was applied to a lesser extent of the chord (approximately 80 percent), the empty weight increased by 3.4 percent, the drag decreased by 20.0 percent, the required engine thrust decreased by 13.0 percent, and the fuel consumption decreased by 16.2 percent. In both cases the required take-off gross weight of the aircraft was less than the original turbulent aircraft.

Orbital Payload Reductions Resulting from Booster and Trajectory Modifications for Recovery of a Large Rocket Booster

NASA Technical Reports Server (NTRS)

Levin, Alan D.; Hopkins, Edward J.

1961-01-01

An analysis was made to determine the reduction in payload for a 300 nautical mile orbit resulting from the addition of inert weight, representing recovery gear, to the first-stage booster of a three-stage rocket vehicle. The values of added inert weight investigated ranged from 0 to 18 percent of gross weight at lift off. The study also included the effects on the payload in orbit and the distance from the launch site at burnout and at impact caused by variation in the vertical rise time before the programmed tilt. The vertical rise times investigated ranged from 16-7 to 100 percent of booster burning time. For a vertical rise of 16.7 percent of booster burning time it was found that a 50-percent increase in the weight of the empty booster resulted in only a 10-percent reduction of the payload in orbit. For no added booster weight, increasing vertical rise time from 16-7 to 100 percent of booster burning time (so that the spent booster would impact in the launch area) reduced the payload by 37 percent. Increasing the vertical rise time from 16-7 to 50 percent of booster burning time resulted in about a 15-percent reduction in the impact distance, and for vertical rise times greater than 50-percent the impact distance decreased rapidly.

75 FR 62104 - Certain Stainless Steel Sheet and Strip in Coils From Germany, Japan, the Republic of Korea, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-07

... also contains, by weight, phosphorus of 0.025 percent or less, silicon of between 0.20 and 0.50 percent..., chromium of between 19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of no more than 0... percent or less, with phosphorus and sulfur each comprising, by weight, 0.03 percent or less. This steel...

75 FR 81221 - Stainless Steel Sheet and Strip in Coils From Mexico; Preliminary Results of the Five-Year...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-27

... also contains, by weight, phosphorus of 0.025 percent or less, silicon of between 0.20 and 0.50 percent..., chromium of between 19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of no more than 0... percent or less, with phosphorus and sulfur each comprising, by weight, 0.03 percent or less. This steel...

76 FR 25670 - Stainless Steel Sheet and Strip in Coils From Italy: Final Results of the Full Five-Year (“Sunset...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-05

... weight, phosphorus of 0.025 percent or less, silicon of between 0.20 and 0.50 percent, and sulfur of 0... 19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of no more than 0.045 percent..., manganese, silicon and molybdenum each comprise, by weight, 0.05 percent or less, with phosphorus and sulfur...

Electrically conductive rigid polyurethane foam

DOEpatents

Neet, T.E.; Spieker, D.A.

1983-12-08

A rigid, moldable polyurethane foam comprises about 2 to 10 weight percent, based on the total foam weight, of a carbon black which is CONDUCTEX CC-40-220 or CONDUCTEX SC, whereby the rigid polyurethane foam is electrically conductive and has essentially the same mechanical properties as the same foam without carbon black added.

12 CFR 390.466 - Risk-based capital credit risk-weight categories.

Code of Federal Regulations, 2014 CFR

2014-01-01

...-sector entity; (J) Bonds issued by the Financing Corporation or the Resolution Funding Corporation; (K... country. (iii) 50 percent Risk Weight (Category 3). (A) Revenue bonds issued by any public-sector entity....g., industrial development bonds; (J) Debt securities not otherwise described in this section; (K...

Electrically conductive rigid polyurethane foam

DOEpatents

Neet, Thomas E.; Spieker, David A.

1985-03-19

A rigid, polyurethane foam comprises about 2-10 weight percent, based on the total foam weight, of a carbon black which is CONDUCTEX CC-40-220 or CONDUCTEX SC, whereby the rigid polyurethane foam is electrically conductive and has essentially the same mechanical properties as the same foam without carbon black added.

Performance of transonic fan stage with weight flow per unit annulus area of 178 kilograms per second per square meter (6.5(lb/sec)/(sq ft))

NASA Technical Reports Server (NTRS)

Moore, R. D.; Urasek, D. C.; Kovich, G.

1973-01-01

The overall and blade-element performances are presented over the stable flow operating range from 50 to 100 percent of design speed. Stage peak efficiency of 0.834 was obtained at a weight flow of 26.4 kg/sec (58.3 lb/sec) and a pressure ratio of 1.581. The stall margin for the stage was 7.5 percent based on weight flow and pressure ratio at stall and peak efficiency conditions. The rotor minimum losses were approximately equal to design except in the blade vibration damper region. Stator minimum losses were less than design except in the tip and damper regions.

Using Mid-Upper Arm Circumference to End Treatment of Severe Acute Malnutrition Leads to Higher Weight Gains in the Most Malnourished Children

PubMed Central

Dale, Nancy M.; Myatt, Mark; Prudhon, Claudine; Briend, André

2013-01-01

Objective The World Health Organization recommends discharging children admitted to nutrition programs treating severe acute malnutrition, with a low mid-upper arm circumference (MUAC <115 mm) when weight gain is >15%. When this recommendation is followed, the most severely malnourished children receive a shorter treatment compared to children that are less severely malnourished. This study assesses whether using MUAC >125 mm as discharge criteria eliminates this effect. Methods and Findings Data from 753 children cured from a Médecins Sans Frontières outpatient nutrition program in Gedaref, North Sudan were analyzed. MUAC >125 mm was used as discharge criteria. Length of stay and percent weight gain of children were compared in relation to nutritional status on admission. Children with low MUAC on admission had a longer duration of treatment (p = 0.000) and also a higher percent weight gain (p = 0.000) than children with higher MUAC. Similar results with weight-for-height z-scores categories were shown with both duration of treatment (p = 0.000) and percent weight gain (p = 0.000). Conclusion This study shows that using MUAC as the discharge criteria eliminates the effect of shorter treatment in most severely malnourished children compared to least severely malnourished, as is observed with percent weight gain. The findings directly address the main concern that has been identified with the current WHO recommendation of using percent weight gain. MUAC could be used as discharge criteria, instead of percent weight gain, as having a longer duration of treatment and a higher percent weight gain for the most malnourished is highly desirable. PMID:23418442

Technology requirements for GaAs photovoltaic arrays

NASA Technical Reports Server (NTRS)

Scott-Monck, J.; Rockey, D.

1981-01-01

An analysis based on percent GaAs solar cell weight and cost is performed to assess the utility of this cell for future space missions. It is shown that the GaAs substrate cost and the end-of-life (EOL) advantage the cell can provide over the space qualified silicon solar cell are the dominant factors determining potential use. Examples are presented to show that system level advantages resulting from reduction in solar panel area may warrant the use of GaAs at its current weight and projected initial cost provided the EOL advantage over silicon is at least 20 percent.

High Mn austenitic stainless steel

DOEpatents

Yamamoto, Yukinori [Oak Ridge, TN; Santella, Michael L [Knoxville, TN; Brady, Michael P [Oak Ridge, TN; Maziasz, Philip J [Oak Ridge, TN; Liu, Chain-tsuan [Knoxville, TN

2010-07-13

An austenitic stainless steel alloy includes, in weight percent: >4 to 15 Mn; 8 to 15 Ni; 14 to 16 Cr; 2.4 to 3 Al; 0.4 to 1 total of at least one of Nb and Ta; 0.05 to 0.2 C; 0.01 to 0.02 B; no more than 0.3 of combined Ti+V; up to 3 Mo; up to 3 Co; up to 1W; up to 3 Cu; up to 1 Si; up to 0.05 P; up to 1 total of at least one of Y, La, Ce, Hf, and Zr; less than 0.05 N; and base Fe, wherein the weight percent Fe is greater than the weight percent Ni, and wherein the alloy forms an external continuous scale including alumina, nanometer scale sized particles distributed throughout the microstructure, the particles including at least one of NbC and TaC, and a stable essentially single phase FCC austenitic matrix microstructure that is essentially delta-ferrite-free and essentially BCC-phase-free.

46 CFR 71.25-20 - Fire-detecting and extinguishing equipment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... weight loss exceed 10 percent of weight of charge. Inspect hose and nozzle to be sure they are clear.1... cylinders. Recharge if weight loss exceeds 10 percent of weight of charge.1 1 Cylinders must be tested and...

Perceptions of body image among Malaysian male and female adolescents.

PubMed

Khor, G L; Zalilah, M S; Phan, Y Y; Ang, M; Maznah, B; Norimah, A K

2009-03-01

Body image concerns are common among adolescents as they undergo rapid physical growth and body shape changes. Having a distorted body image is a risk factor for the development of disordered eating behaviours and eating disorders. This study was undertaken to investigate body image concerns among Malaysian male and female adolescents aged 11-15 years. A total of 2,050 adolescents (1,043 males and 1,007 females) with a mean age of 13.1 +/- 0.8 years from secondary schools in Kedah and Pulau Pinang were included in the study. Questionnaires were used to collect socioeconomic data and body image indicators. The majority (87 percent) of the adolescents were concerned with their body shape. While the majority of underweight, normal weight and overweight male and female subjects perceived their body weight status correctly according to their body mass index (BMI), a noteworthy proportion in each category misjudged their body weight. About 35.4 percent of the males and 20.5 percent of the females in the underweight category perceived themselves as having a normal weight, while 29.4 percent and 26.7 percent of the overweight males and females respectively also perceived that they had a normal weight. A higher proportion of the females (20 percent) than males (9 percent) with a normal BMI perceived themselves as fat. Most of the male (78-83 percent) and female subjects (69-74 percent) in all the BMI categories desired to be taller than their current height. An appreciable proportion of both the males (41.9 percent) and females (38.2 percent) preferred to remain thin, or even to be thinner (23.7 percent of males and 5.9 percent of females). Females had a significantly higher mean body dissatisfaction score than males, indicating their preference for a slimmer body shape. More males (49.1 percent) preferred a larger body size while more females (58.3 percent) idealised a smaller body size. Compared to normal weight and underweight subjects, overweight males and females expressed lower confidence and acceptance levels, as well as expressed greater preoccupation with and anxiety over their body weight and shape. As having a distorted body image may lead to negative effects such as unhealthy eating habits and disordered eating behaviours, it is recommended that appropriate educational efforts on body image be incorporated into school health activities for adolescents.

High capacity carbon dioxide sorbent

DOEpatents

Dietz, Steven Dean; Alptekin, Gokhan; Jayaraman, Ambalavanan

2015-09-01

The present invention provides a sorbent for the removal of carbon dioxide from gas streams, comprising: a CO.sub.2 capacity of at least 9 weight percent when measured at 22.degree. C. and 1 atmosphere; an H.sub.2O capacity of at most 15 weight percent when measured at 25.degree. C. and 1 atmosphere; and an isosteric heat of adsorption of from 5 to 8.5 kilocalories per mole of CO.sub.2. The invention also provides a carbon sorbent in a powder, a granular or a pellet form for the removal of carbon dioxide from gas streams, comprising: a carbon content of at least 90 weight percent; a nitrogen content of at least 1 weight percent; an oxygen content of at most 3 weight percent; a BET surface area from 50 to 2600 m.sup.2/g; and a DFT micropore volume from 0.04 to 0.8 cc/g.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chakravarti, D.; Eisler, R.

The values for strontium-90 and gross beta activity in the fat and non- fat fractions from the livers of twelve coconut crabs (Birgus latro) collected at Rongelap Atoll during March 1958 are presented. Although fat constituted an average of 47 percent by weight on a wet weight basis (74 percent on a dry weight basis), gross beta activity of the fat fraction amounted to less than 0.5 percent of the total activity on a wet weight basis. Fat content on a wet weight basis had a range of 31 percent to 65 percent. There is a linear relationship between strontium-90more » activity and gross beta activity. Since the fat content of coconut crab liver is variable and the fat fraction contains practically no radioactivity, it is suggested that the radioactivity (and mineral content) of liver samples be compared on the basis of the non-fat solids. (auth)« less

Mission Analysis and Aircraft Sizing of a Hybrid-Electric Regional Aircraft

NASA Technical Reports Server (NTRS)

Antcliff, Kevin R.; Guynn, Mark D.; Marien, Ty V.; Wells, Douglas P.; Schneider, Steven J.; Tong, Michael T.

2016-01-01

The purpose of this study was to explore advanced airframe and propulsion technologies for a small regional transport aircraft concept (approximately 50 passengers), with the goal of creating a conceptual design that delivers significant cost and performance advantages over current aircraft in that class. In turn, this could encourage airlines to open up new markets, reestablish service at smaller airports, and increase mobility and connectivity for all passengers. To meet these study goals, hybrid-electric propulsion was analyzed as the primary enabling technology. The advanced regional aircraft is analyzed with four levels of electrification, 0 percent electric with 100 percent conventional, 25 percent electric with 75 percent conventional, 50 percent electric with 50 percent conventional, and 75 percent electric with 25 percent conventional for comparison purposes. Engine models were developed to represent projected future turboprop engine performance with advanced technology and estimates of the engine weights and flowpath dimensions were developed. A low-order multi-disciplinary optimization (MDO) environment was created that could capture the unique features of parallel hybrid-electric aircraft. It is determined that at the size and range of the advanced turboprop: The battery specific energy must be 750 watt-hours per kilogram or greater for the total energy to be less than for a conventional aircraft. A hybrid vehicle would likely not be economically feasible with a battery specific energy of 500 or 750 watt-hours per kilogram based on the higher gross weight, operating empty weight, and energy costs compared to a conventional turboprop. The battery specific energy would need to reach 1000 watt-hours per kilogram by 2030 to make the electrification of its propulsion an economically feasible option. A shorter range and/or an altered propulsion-airframe integration could provide more favorable results.

An Environmental Intervention to Prevent Excess Weight Gain in African American Students: A Pilot Study

PubMed Central

Newton, Robert L.; Han, Hongmei; Anton, Stephen D.; Martin, Corby K.; Stewart, Tiffany M.; Lewis, Leslie; Champagne, Catherine M.; Sothern, Melinda; Ryan, Donna; Williamson, Donald A.

2009-01-01

Purpose Examine the influence of an environmental intervention to prevent excess weight gain in African American children. Design Single-group repeated measures. Setting The intervention was delivered to a school composed of African American children. Subjects Approximately 45% (N = 77) of enrolled second through sixth grade students. Intervention The 18-month intervention was designed to alter the school environment to prevent excess weight gain by making healthier eating choices and physical activity opportunities more available. Measures Body Mass Index Percentile was the primary outcome variable. Body mass index Z-score was also calculated, and percent body fat, using bioelectrical impedance, was also measured. Total caloric intake (kcal), and percent kcal from fat, carbohydrate, and protein were measured by digital photography. Minutes of physical activity and sedentary behavior were self-reported. Analysis Mixed models analysis was used, covarying baseline values. Results Boys maintained while girls increased percent body fat over 18-months (p = .027). All children decreased percent of kcal consumed from total and saturated fat, and increased carbohydrate intake and self-reported physical activity during the intervention (p values < .025). body mass index Z-score, sedentary behavior, and total caloric intake were unchanged. Conclusion The program may have resulted in maintenance of percent body fat in boys. Girl's percent body fat steadily increased, despite similar behavioral changes as boys. School-based interventions targeting African American children should investigate strategies that can be effective across gender. PMID:20465148

A comparison of methods for organ-weight data adjustment in chicks.

PubMed

Brown, D R; Southern, L L; Baker, D H

1985-02-01

An experiment was conducted with 168 Arbor Acre X Peterson unsexed, crossbred broiler chicks to compare methods of expressing organ-weight data and to assess changes in organ weights and physiological parameters as body weight (97 to 791 g) and age (5 to 26 days) increased. Actual wet weight of liver, heart, intestine, spleen, and pancreas and percent bone ash increased (P less than .01) as age and body weight increased. Tibia length-to-width ratio decreased (P less than .01) as age and body weight increased. Blood hemoglobin, hematocrit, and plasma protein were not affected (P greater than .1) by age or by body weight. Liver, heart, and intestinal weight decreased (P less than .01) and spleen weight increased (P less than .01) as body weight and age increased when these tissue weights were expressed as percent of body weight. Liver weight adjusted for body weight by covariance analysis, however, remained constant; adjusted heart and intestinal weights decreased (P less than .01), and adjusted spleen weights increased (P less than .01) with increasing age and body weight. The covariate, body weight, was not significant (P greater than .1) for pancreas weight, tibia length-to-width ratio, and percent bone ash. Except for spleen, adjustment by covariance analysis more effectively reduced variation due to body weight than did expression as percent of body weight.(ABSTRACT TRUNCATED AT 250 WORDS)

KSC-03PD-1095

NASA Technical Reports Server (NTRS)

2003-01-01

KENNEDY SPACE CENTER, FLA. -- A member of the Columbia Reconstruction Project Team examines a piece of Columbia debris on the floor of the KSC RLV Hangar. Shipped from Barksdale Air Force Base, Shreveport, La., more than 70,000 items, weighing 78,000 pounds, about 36 percent of the Shuttle by weight, have been delivered to KSC for use in the mishap investigation. Ground teams have completed 78 percent of their primary search area, and airborne crews finished 80 percent of their assigned area. Search teams have completed 98 percent of the underwater searches in Lake Nacogdoches and Toledo Bend Reservoir.

Investigation of effect of fluoride on corrosion of 2S-0 aluminum and 347 stainless steel in fuming nitric acid at 170 F

NASA Technical Reports Server (NTRS)

Feiler, Charles E; Morrell, Gerald

1954-01-01

The effect of small additions of fluoride on the corrosion of 2S-0 aluminum and 347 stainless steel by fuming nitric acid at 170 degrees F has been evaluated quantitatively by the determination of the weight loss of metal specimens immersed in the acid. The ratio of metal surface area to volume of acid was approximately 7.5 inch (superscript)-1 in all cases. It was found that for acids containing no fluorides the weight loss of aluminum was approximately 1/5 that of stainless steel. Addition of 1 percent fluoride ion to the acid reduced the weight loss of both metals to practically zero even after 26 days of exposure to the acid at 170 degrees F. The minimum quantity of fluoride ion required to inhibit corrosion was found to be approximately 0.25 and 0.5 percent for aluminum and stainless steel, respectively, in white fuming nitric acid and 0.5 and 1 percent in red fuming nitric acid (18 percent nitrogen dioxide). These fluoride percentages were based on the total weight of acid. Provided the concentration of fluoride ion was sufficient to inhibit corrosion, the source of these ions was immaterial. Additional information concerning the effect of fluorides on corrosion was obtained by measuring the electrode potentials of the metals against a platinum reference electrode.

Lamellar Biogels: Fluid-Membrane-Based Hydrogels Containing Polymer Lipids

NASA Astrophysics Data System (ADS)

Warriner, Heidi E.; Idziak, Stefan H. J.; Slack, Nelle L.; Davidson, Patrick; Safinya, Cyrus R.

1996-02-01

A class of lamellar biological hydrogels comprised of fluid membranes of lipids and surfactants with small amounts of low molecular weight poly(ethylene glycol)-derived polymer lipids (PEG-lipids) were studied by x-ray diffraction, polarized light microscopy, and rheometry. In contrast to isotropic hydrogels of polymer networks, these membrane-based birefringent liquid crystalline biogels, labeled Lα,g, form the gel phase when water is added to the liquid-like lamellar L_α phase, which reenters a liquid-like mixed phase upon further dilution. Furthermore, gels with larger water content require less PEG-lipid to remain stable. Although concentrated (~50 weight percent) mixtures of free PEG (molecular weight, 5000) and water do not gel, gelation does occur in mixtures containing as little as 0.5 weight percent PEG-lipid. A defining signature of the Lα,g regime as it sets in from the fluid lamellar L_α phase is the proliferation of layer-dislocation-type defects, which are stabilized by the segregation of PEG-lipids to the defect regions of high membrane curvature that connect the membranes.

Future space transportation systems analysis study. Phase 1: Technical report, appendices. [a discussion of orbit transfer vehicles, lunar transport vehicles, space shuttles, and reusable spacecraft

NASA Technical Reports Server (NTRS)

1975-01-01

The transportation mass requirements developed for each mission and transportation mode were based on vehicle systems sized to fit the exact needs of each mission (i.e. rubber vehicles). The parametric data used to derive the mass requirements for each mission and transportation mode are presented to enable accommodation of possible changes in mode options or payload definitions. The vehicle sizing and functional requirements used to derive the parametric data will form the basis for conceptual configurations of the transportation elements in a later phase of study. An investigation of the weight growth approach to future space transportation systems analysis is presented. Parameters which affect weight growth, past weight histories, and the current state of future space-mission design are discussed. Weight growth factors of from 10 percent to 41 percent were derived for various missions or vehicles.

75 FR 5947 - Stainless Steel Sheet and Strip in Coils from Taiwan: Final Results and Rescission in Part of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-05

... also contains, by weight, phosphorus of 0.025 percent or less, silicon of between 0.20 and 0.50 percent..., chromium of between 19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of no more than 0..., silicon and molybdenum each comprise, by weight, 0.05 percent or less, with phosphorus and sulfur each...

Predicting successful long-term weight loss from short-term weight-loss outcomes: new insights from a dynamic energy balance model (the POUNDS Lost study)123

PubMed Central

Ivanescu, Andrada E; Martin, Corby K; Heymsfield, Steven B; Marshall, Kaitlyn; Bodrato, Victoria E; Williamson, Donald A; Anton, Stephen D; Sacks, Frank M; Ryan, Donna; Bray, George A

2015-01-01

Background: Currently, early weight-loss predictions of long-term weight-loss success rely on fixed percent-weight-loss thresholds. Objective: The objective was to develop thresholds during the first 3 mo of intervention that include the influence of age, sex, baseline weight, percent weight loss, and deviations from expected weight to predict whether a participant is likely to lose 5% or more body weight by year 1. Design: Data consisting of month 1, 2, 3, and 12 treatment weights were obtained from the 2-y Preventing Obesity Using Novel Dietary Strategies (POUNDS Lost) intervention. Logistic regression models that included covariates of age, height, sex, baseline weight, target energy intake, percent weight loss, and deviation of actual weight from expected were developed for months 1, 2, and 3 that predicted the probability of losing <5% of body weight in 1 y. Receiver operating characteristic (ROC) curves, area under the curve (AUC), and thresholds were calculated for each model. The AUC statistic quantified the ROC curve’s capacity to classify participants likely to lose <5% of their body weight at the end of 1 y. The models yielding the highest AUC were retained as optimal. For comparison with current practice, ROC curves relying solely on percent weight loss were also calculated. Results: Optimal models for months 1, 2, and 3 yielded ROC curves with AUCs of 0.68 (95% CI: 0.63, 0.74), 0.75 (95% CI: 0.71, 0.81), and 0.79 (95% CI: 0.74, 0.84), respectively. Percent weight loss alone was not better at identifying true positives than random chance (AUC ≤0.50). Conclusions: The newly derived models provide a personalized prediction of long-term success from early weight-loss variables. The predictions improve on existing fixed percent-weight-loss thresholds. Future research is needed to explore model application for informing treatment approaches during early intervention. The POUNDS Lost study was registered at clinicaltrials.gov as NCT00072995. PMID:25733628

Parametric Study of a Mach 2.4 Transport Engine with Supersonic Through-Flow Rotor and Supersonic Counter-Rotating Diffuser (SSTR/SSCRD)

NASA Technical Reports Server (NTRS)

Tran, Donald H.

2004-01-01

A parametric study is conducted to evaluate a mixed-flow turbofan equipped with a supersonic through-flow rotor and a supersonic counter-rotating diffuser (SSTR/SSCRD) for a Mach 2.4 civil transport. Engine cycle, weight, and mission analyses are performed to obtain a minimum takeoff gross weight aircraft. With the presence of SSTR/SSCRD, the inlet can be shortened to provide better pressure recovery. For the same engine airflow, the inlet, nacelle, and pylon weights are estimated to be 73 percent lighter than those of a conventional inlet. The fan weight is 31 percent heavier, but overall the installed engine pod weight is 11 percent lighter than the current high-speed civil transport baseline conventional mixed-flow turbofan. The installed specific fuel consumption of the supersonic fan engine is 2 percent higher than that of the baseline turbofan at supersonic cruise. Finally, the optimum SSTR/SSCRD airplane meets the FAR36 Stage 3 noise limit and is within 7 percent of the baseline turbofan airplane takeoff gross weight over a 5000-n mi mission.

Aqueous flooding methods for tertiary oil recovery

DOEpatents

Peru, Deborah A.

1989-01-01

A method of aqueous flooding of subterranean oil bearing formation for tertiary oil recovery involves injecting through a well into the formation a low alkaline pH aqueous sodium bicarbonate flooding solution. The flooding solution's pH ranges from about 8.25 to 9.25 and comprises from 0.25 to 5 weight percent and preferably about 0.75 to 3.0 weight percent of sodium bicarbonate and includes a petroleum recovery surfactant of 0.05 to 1.0 weight percent and between 1 and 20 weight percent of sodium chloride. After flooding, an oil and water mixture is withdrawn from the well and the oil is separated from the oil and water mixture.

Thermal stability of some aircraft turbine fuels derived from oil shale and coal

NASA Technical Reports Server (NTRS)

Reynolds, T. W.

1977-01-01

Thermal stability breakpoint temperatures are shown for 32 jet fuels prepared from oil shale and coal syncrudes by various degrees of hydrogenation. Low severity hydrotreated shale oils, with nitrogen contents of 0.1 to 0.24 weight percent, had breakpoint temperatures in the 477 to 505 K (400 to 450 F) range. Higher severity treatment, lowering nitrogen levels to 0.008 to 0.017 weight percent, resulted in breakpoint temperatures in the 505 to 533 K (450 to 500 F) range. Coal derived fuels showed generally increasing breakpoint temperatures with increasing weight percent hydrogen, fuels below 13 weight percent hydrogen having breakpoints below 533 K (500 F). Comparisons are shown with similar literature data.

76 FR 25668 - Stainless Steel Sheet and Strip in Coils From Mexico: Final Results of the Five-Year (“Sunset...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-05

... between 0.20 and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent..., aluminum of no less than 5.0 percent, phosphorus of no more than 0.045 percent, sulfur of no more than 0.03... or less, with phosphorus and sulfur each comprising, by weight, 0.03 percent or less. This steel has...

Effect of Ozone Addition on Combustion Efficiency of Hydrogen: Liquid-Oxygen Propellant in Small Rockets

NASA Technical Reports Server (NTRS)

Miller, Riley O.; Brown, Dwight D.

1959-01-01

An experimental study shows that 2 percent by weight ozone in oxygen has little effect on overall reactivity for a range of oxidant-fuel weight ratios from 1 to 6. This conclusion is based on characteristic-velocity measurements in 200-pound-thrust chambers at a pressure of 300 pounds per square inch absolute with low-efficiency injectors. The presence of 9 percent ozone in oxygen also did not affect performance in an efficient chamber. Explosions were encountered when equipment or procedure permitted ozone to concentrate locally. These experiments indicate that even small amounts of ozone in oxygen can cause operational problems.

The relationship between biological cognitive and psychosocial characteristics of parents and the weight of infant at the time of birth in Isfahan.

PubMed

Talebian, Mohammad Hassan; Afrooz, Gholam Ali; Hooman, Heidar Ali; Aghaei, Asghar

2013-01-01

The present study was connected in order to evaluate the relationship between biological, cognitive and psychosocial characteristics of mothers and the weight of infant at the time of birth. In order to conduct this research a sample of 910 women among recently delivered mothers of Isfahan province in 2009 were selected. From stratified sampling and cluster sampling according to the percentage of population in each of the cities of Isfahan Province was used. The data was gathered with a questionnaire prepared by the researcher in order to evaluate the biological cognitive and psychosocial characteristics of mothers, in addition to the Enrich marital satisfaction test. After collecting data, the analysis of the data was done with SPSS software in two categories of descriptive and inferential statistics by using logistic regression model. The results showed that the prevalence of low weight infants was 9.5 percent and 38.7 percent of pregnancies was unwanted. Twenty-nine percent of mothers had marital dissatisfaction. 15/6 percent of pregnancies were below 20 years old and 22 percent was above of 35 years old. 38.9 percent of mothers were exposed to cigarette smoke. The average of weight gain during pregnancies was 9 kilograms. Thirty three percent of mothers had high blood pressure during pregnancy, 26.7 percent had history of abortion and 31.9 percent had history of bleeding. 23/1percent of women was employed during pregnancy, 19.8 percent gave twin birth and 21/1 percent of parents were relative of each other, 29.7 percent of deliveries were done in cesarean way. The results of this study showed that severe marital dissatisfaction, abnormal blood pressure during pregnancy, being employed during pregnancy, weight gain less than 5 Kg during pregnancy, pregnancy below the age of 20 can meaning fully increase the possibility of low birth weight in infant (α=0.05). The results were consisting with the previous findings and indicated that some of the applicable benefits of this research can be recording of information about each delivery in the whole country with holding training workshops of before and during pregnancy skills by welfare organization.

Iron Supplements Reduce Behavior Problems in Low Birth Weight Infants

MedlinePlus

... low birth weight groups and the normal-weight control group. However, for behavioral problems, there was a significant ... percent of the 2-mg group. In the control group, 3.2 percent of children showed signs of ...

Weight outcomes audit in 1.3 million adults during their first 3 months' attendance in a commercial weight management programme.

PubMed

Stubbs, R James; Morris, Liam; Pallister, Carolyn; Horgan, Graham; Lavin, Jacquie H

2015-09-10

Over sixty percent of adults in the UK are now overweight/obese. Weight management on a national scale requires behavioural and lifestyle solutions that are accessible to large numbers of people. Evidence suggests commercial weight management programmes help people manage their weight but there is little research examining those that pay to attend such programmes rather than being referred by primary care. The objective of this analysis was to evaluate the effectiveness of a UK commercial weight management programme in self-referred, fee-paying participants. Electronic weekly weight records were collated for self-referred, fee-paying participants of Slimming World groups joining between January 2010 and April 2012. This analysis reports weight outcomes in 1,356,105 adult, non-pregnant participants during their first 3 months' attendance. Data were analysed by regression, ANOVA and for binomial outcomes, chi-squared tests using the R statistical program. Mean (SD) age was 42.3 (13.6) years, height 1.65 m (0.08) and start weight was 88.4 kg (18.8). Mean start BMI was 32.6 kg/m(2) (6.3 kg/m(2)) and 5 % of participants were men. Mean weight change of all participants was -3.9 kg (3.6), percent weight change -4.4 (3.8), and BMI change was -1.4 kg/m(2) (1.3). Mean attendance was 7.8 (4.3) sessions in their first 3 months. For participants attending at least 75 % of possible weekly sessions (n = 478,772), mean BMI change was -2.5 kg/m(2) (1.3), weight change -6.8 kg (3.7) and percent weight change -7.5 % (3.5). Weight loss was greater in men than women absolutely (-6.5 (5.3) kg vs -3.8 (3.4) kg) and as a percentage (5.7 % (4.4) vs 4.3 % (3.7)), respectively. All comparisons were significant (p < 0.001). Level of attendance and percent weight loss in the first week of attendance together accounted for 55 % of the variability in weight lost during the study period. A large-scale commercial lifestyle-based weight management programme had a significant impact on weight loss outcomes over 3 months. Higher levels of attendance led to levels of weight loss known to be associated with significant clinical benefits, which on this scale may have an impact on public health.

Effects of incandescent radiation on photosynthesis, growth rate and yield of 'Waldmann's Green' leaf lettuce

NASA Technical Reports Server (NTRS)

Knight, Sharon L.; Mitchell, Cary A.

1988-01-01

Effects of different ratios of incandescent (ln) to fluorescent (Fl) radiation were tested on growth of 'Waldmann's Green' leaf lettuce in a controlled environment. After 4 days of treatment, dry weight, leaf area, relative growth rate (RGR), net assimilation rate (NAR), leaf area ratio (LAR) and photosynthetic rate (Pn) were greater for plants grown at 84 rather than 16 percent of total irradiance (82 W/sq m) from ln lamps. Although leaf dry weight and area were 12-17 percent greater at 84 percent ln after the first 8 days of treatment, there were no differences in RGR or Pn between treatments during the last 4 days. If 84 percent ln was compared with 50 percent ln, all cumulative growth parameters, RGR, NAR and Pn were greater for 84 percent ln during the first 4 days of treatment. However, during the second 4 days, RGR was greater for the 50 percent ln treatment, resulting in no net difference in leaf dry weight or area between treatments. Shifting from 84 to 50 percent ln radiation between the first and second 4 days of treatment increased plant dry weight, leaf area, RGR and NAR relative to those under 84 percent ln for 8 days continuously.

Colorectal cancer: intrinsic characteristics modulate cancer energy expenditure and the risk of cachexia.

PubMed

Ravasco, Paula; Monteiro-Grillo, Isabel; Camilo, Maria

2007-08-01

To conduct a prospective longitudinal study in colorectal cancer (CRC) patients: 1) to evaluate resting energy expenditure (REE), weight/dietary intake changes, and response to treatment, taking into consideration cancer stage and histology; 2) to determine their potential interrelations; and 3) to quantify the relative contributions to REE of cancer/nutrition/treatment. 101 CRC patients proposed for neoadjuvant radiotherapy (RT) were evaluated before and after RT: REE (indirect calorimetry measurements), percentage of weight loss, usual diet (diet history), current diet (24 hour recall), and treatment response. REE was higher in Stages III/IV versus I/II, at the RT onset (p < 0.002) and end (p = 0.02), and in moderately/poorly/undifferentiated cancers vs well differentiated (onset, p < 0.001) and (RT end, p = 0.01); weight/intake reductions were also greater in Stages III/IV versus I/II (p < 0.01) and in moderately/poorly/undifferentiated cancers versus well differentiated (p < 0.02). According to patients' response to treatment, REE was increased in Stage III/IV (p < 0.005) and Grade 2/3 histology (p < 0.003). In nonresponders, REE increased 7.2 +/- 1.3 kcal/kg/day and decreased 2.8 +/- 0.4 kcal/kg/day in responders. REE changes were not-significantly influenced by weight/intake. Relative contributions to baseline REE were determined in 25 percent by stage, in 25 percent by histology, in 3 percent by intake and in 4 percent by weight loss. At the end of RT, higher REE was attributed in 26 percent to stage, in 27 percent to histology, in 30 percent to nontreatment response, in 9 percent to intake, and in 8 percent to weight loss. In this CRC patient population, higher metabolic rates were mainly determined by the tumor burden and aggressiveness in association with response to treatment clearly disclaiming the effect of weight loss and/or dietary intake reductions.

Multiple Application Propfan Study (MAPS): Advanced tactical transport

NASA Technical Reports Server (NTRS)

Newton, F. C.; Liebeck, R. H.; Mitchell, G. H.; Mooiweer, A.; Platte, M. M.; Toogood, T. L.; Wright, R. A.

1986-01-01

This study was conducted to ascertain potential benefits of a propfan propulsion system application to a blended wing/body military tactical transport. Based on a design cruise Mach no. of 0.75 for the design mission, the results indicate a significant advantage in various figures of merit for the propfan over those of a comparable technology turbofan. Although the propfan has a 1.6 percent greater takeoff gross weight, its life cycle cost is 5.3 percent smaller, partly because of a 27 percent smaller specific fuel consumption. When employed on alternate missions, the propfan configuration offers significantly improved flexibility and capability: an increase in sea level penetration distance of more than 100 percent, or in time-on-station of 24 percent, or in deployment payload of 38 percent.

High Nb, Ta, and Al creep- and oxidation-resistant austenitic stainless steel

DOEpatents

Brady, Michael P [Oak Ridge, TN; Santella, Michael L [Knoxville, TN; Yamamoto, Yukinori [Oak Ridge, TN; Liu, Chain-tsuan [Oak Ridge, TN

2010-07-13

An austenitic stainless steel HTUPS alloy includes, in weight percent: 15 to 30 Ni; 10 to 15 Cr; 2 to 5 Al; 0.6 to 5 total of at least one of Nb and Ta; no more than 0.3 of combined Ti+V; up to 3 Mo; up to 3 Co; up to 1 W; up to 0.5 Cu; up to 4 Mn; up to 1 Si; 0.05 to 0.15 C; up to 0.15 B; up to 0.05 P; up to 1 total of at least one of Y, La, Ce, Hf, and Zr; less than 0.05 N; and base Fe, wherein the weight percent Fe is greater than the weight percent Ni wherein said alloy forms an external continuous scale comprising alumina, nanometer scale sized particles distributed throughout the microstructure, said particles comprising at least one composition selected from the group consisting of NbC and TaC, and a stable essentially single phase fcc austenitic matrix microstructure, said austenitic matrix being essentially delta-ferrite-free and essentially BCC-phase-free.

Surface-Tolerant Coatings for Aircraft Hangars, Flight Control Tower, and Deluge Tanks at Fort Campbell

DTIC Science & Technology

2007-06-01

to chalking. Fluorinated polymers are recognized as the most durable coatings in terms of preservation of appearance. Architectural building panels...phosphate) 19.4 Percent by Weight Film-Former phenolic varnish 55.3 Percent by Weight Antioxidant butylated hydroxytoluene (BHT) 0.43 Percent

Energy density of lake whitefish Coregonus clupeaformis in Lakes Huron and Michigan

USGS Publications Warehouse

Pothoven, S.A.; Nalepa, T.F.; Madenjian, C.P.; Rediske, R.R.; Schneeberger, P.J.; He, J.X.

2006-01-01

We collected lake whitefish Coregonus clupeaformis off Alpena and Tawas City, Michigan, USA in Lake Huron and off Muskegon, Michigan USA in Lake Michigan during 2002–2004. We determined energy density and percent dry weight for lake whitefish from both lakes and lipid content for Lake Michigan fish. Energy density increased with increasing fish weight up to 800 g, and then remained relatively constant with further increases in fish weight. Energy density, adjusted for weight, was lower in Lake Huron than in Lake Michigan for both small (≤800 g) and large fish (>800 g). Energy density did not differ seasonally for small or large lake whitefish or between adult male and female fish. Energy density was strongly correlated with percent dry weight and percent lipid content. Based on data from commercially caught lake whitefish, body condition was lower in Lake Huron than Lake Michigan during 1981–2003, indicating that the dissimilarity in body condition between the lakes could be long standing. Energy density and lipid content in 2002–2004 in Lake Michigan were lower than data for comparable sized fish collected in 1969–1971. Differences in energy density between lakes were attributed to variation in diet and prey energy content as well as factors that affect feeding rates such as lake whitefish density and prey abundance.

Does Successful Weight Loss in an Internet-Based Worksite Weight Loss Program Improve Employee Presenteeism and Absenteeism?

PubMed Central

Harden, Samantha M.; You, Wen; Almeida, Fabio A.; Hill, Jennie L.; Linnan, Laura A.; Allen, Kacie C.; Estabrooks, Paul A.

2017-01-01

Certain risk factors associated with overweight and obesity may lead to reduced productivity in the workforce (i.e., increased absenteeism and presenteeism). Participants in a large, Internet-based worksite weight loss intervention, who were present at follow-up (N = 1,030), completed a self-reported productivity measure (World Health Organization’s Health and Work Performance Questionnaire) at baseline and postintervention. Twenty-two percent of the participants lost a clinically meaningful amount of weight (≥5% weight loss). There were no statistically significant (p < .05) relationships between weight change from baseline to 12 months and change scores of absolute or relative absenteeism or for absolute or relative presenteeism. Within a modestly successful Internet-based, worksite weight loss intervention, weight loss did not improve self-reported absenteeism or presenteeism. Further studies are needed to explore the sensitivity of the World Health Organization’s Health and Work Performance Questionnaire and the long-term effects of weight loss on productivity. PMID:25842385

Does Successful Weight Loss in an Internet-Based Worksite Weight Loss Program Improve Employee Presenteeism and Absenteeism?

PubMed

Harden, Samantha M; You, Wen; Almeida, Fabio A; Hill, Jennie L; Linnan, Laura A; Allen, Kacie C; Estabrooks, Paul A

2015-12-01

Certain risk factors associated with overweight and obesity may lead to reduced productivity in the workforce (i.e., increased absenteeism and presenteeism). Participants in a large, Internet-based worksite weight loss intervention, who were present at follow-up (N = 1,030), completed a self-reported productivity measure (World Health Organization's Health and Work Performance Questionnaire) at baseline and postintervention. Twenty-two percent of the participants lost a clinically meaningful amount of weight (≥5% weight loss). There were no statistically significant (p < .05) relationships between weight change from baseline to 12 months and change scores of absolute or relative absenteeism or for absolute or relative presenteeism. Within a modestly successful Internet-based, worksite weight loss intervention, weight loss did not improve self-reported absenteeism or presenteeism. Further studies are needed to explore the sensitivity of the World Health Organization's Health and Work Performance Questionnaire and the long-term effects of weight loss on productivity. © 2015 Society for Public Health Education.

Lower Cody Shale (Niobrara equivalent) in the Bighorn Basin, Wyoming and Montana: thickness, distribution, and source rock potential

USGS Publications Warehouse

Finn, Thomas M.

2014-01-01

The lower shaly member of the Cody Shale in the Bighorn Basin, Wyoming and Montana is Coniacian to Santonian in age and is equivalent to the upper part of the Carlile Shale and basal part of the Niobrara Formation in the Powder River Basin to the east. The lower Cody ranges in thickness from 700 to 1,200 feet and underlies much of the central part of the basin. It is composed of gray to black shale, calcareous shale, bentonite, and minor amounts of siltstone and sandstone. Sixty-six samples, collected from well cuttings, from the lower Cody Shale were analyzed using Rock-Eval and total organic carbon analysis to determine the source rock potential. Total organic carbon content averages 2.28 weight percent for the Carlile equivalent interval and reaches a maximum of nearly 5 weight percent. The Niobrara equivalent interval averages about 1.5 weight percent and reaches a maximum of over 3 weight percent, indicating that both intervals are good to excellent source rocks. S2 values from pyrolysis analysis also indicate that both intervals have a good to excellent source rock potential. Plots of hydrogen index versus oxygen index, hydrogen index versus Tmax, and S2/S3 ratios indicate that organic matter contains both Type II and Type III kerogen capable of generating oil and gas. Maps showing the distribution of kerogen types and organic richness for the lower shaly member of the Cody Shale show that it is more organic-rich and more oil-prone in the eastern and southeastern parts of the basin. Thermal maturity based on vitrinite reflectance (Ro) ranges from 0.60–0.80 percent Ro around the margins of the basin, increasing to greater than 2.0 percent Ro in the deepest part of the basin, indicates that the lower Cody is mature to overmature with respect to hydrocarbon generation.

Insurance-mandated preoperative diet and outcomes after bariatric surgery.

PubMed

Keith, Charles J; Goss, Lauren E; Blackledge, Camille D; Stahl, Richard D; Grams, Jayleen

2018-05-01

Despite a lack of demonstrated patient benefit, many insurance providers mandate a physician-supervised diet before financial coverage for bariatric surgery. To compare weight loss between patients with versus without insurance mandating a preoperative diet. University hospital, United States. Retrospective study of all patients who underwent laparoscopic Roux-en-Y gastric bypass or sleeve gastrectomy over a 5-year period, stratified based on whether an insurance-mandated physician-supervised diet was required. Weight loss outcomes at 6, 12, and 24 months postoperation were compared. Linear mixed-models and backward-stepwise selection were used. P<0.05 was considered significant. Of 284 patients, 225 (79%) were required and 59 (21%) were not required to complete a preoperative diet by their insurance provider. Patients without the requirement had a shorter time to operation from initial consultation (P = .04), were older (P<.01), and were more likely to have government-sponsored insurance (P<.01). There was no difference in preoperative weight or body mass index or co-morbidities. In unadjusted models, percent excess weight loss was superior in the group without an insurance-mandated diet at 12 (P = .050) and 24 (P = .045) months. In adjusted analyses, this group also had greater percent excess weight loss at 6 (P<.001), 12 (P<.001), and 24 (P<.001) months; percent total weight loss at 24 months (P = .004); and change in body mass index at 6 (P = .032) and 24 (P = .007) months. There was no difference in length of stay or complication rates. Insurance-mandated preoperative diets delay treatment and may lead to inferior weight loss. Published by Elsevier Inc.

7 CFR 3201.65 - Concrete and asphalt cleaners.

Code of Federal Regulations, 2014 CFR

2014-01-01

... concrete etching as well as to remove petroleum-based soils, lubricants, paints, mastics, organic soils... product as a percent of the weight (mass) of the total organic carbon in the finished product. (c...

7 CFR 3201.65 - Concrete and asphalt cleaners.

Code of Federal Regulations, 2012 CFR

2012-01-01

... concrete etching as well as to remove petroleum-based soils, lubricants, paints, mastics, organic soils... product as a percent of the weight (mass) of the total organic carbon in the finished product. (c...

7 CFR 3201.65 - Concrete and asphalt cleaners.

Code of Federal Regulations, 2013 CFR

2013-01-01

... concrete etching as well as to remove petroleum-based soils, lubricants, paints, mastics, organic soils... product as a percent of the weight (mass) of the total organic carbon in the finished product. (c...

40 CFR 60.545 - Recordkeeping requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Manufacturing Industry § 60.545 Recordkeeping requirements. (a) Each owner or operator of an affected facility... spraying operation using water-based cements or sprays containing less than 1.0 percent by weight of VOC...

76 FR 2332 - Stainless Steel Sheet and Strip in Coils From Mexico; Final Results of Antidumping Duty...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-13

... molybdenum, and between 0.20 and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0..., aluminum of no less than 5.0 percent, phosphorus of no more than 0.045 percent, sulfur of no more than 0.03... molybdenum each comprise, by weight, 0.05 percent or less, with phosphorus and sulfur each comprising, by...

Aboveground Biomass of Choctawhatchee Sand Pine in Northwest Florida

Treesearch

Michael A. Taras

1980-01-01

Choctawhatchee sand pine trees 4 to 14 inches d.b.h. were selected from a natural, uneven-aged stand in northwest Florida to determine the weight and volume of above ground biomass. On the average, 85 percent of the green weight of the total tree was wood, 11 percent bark. and 4 percent needles. The average tree sampled had 82 percent of its wood in the stem and 18...

Triangular osteosynthesis of vertically unstable sacrum fractures: a new concept allowing early weight-bearing.

PubMed

Schildhauer, T A; Josten, Ch; Muhr, G

2006-01-01

Presentation of a new triangular osteosynthesis technique that permits early weight-bearing in vertically unstable sacral fractures. : Retrospective evaluation of a consecutive series. Level I trauma center. Thirty-four patients, twenty-eight of whom were poly-traumatized, all with vertically unstable sacral fractures. This group included eight women and twenty-six men, with a mean age of thirty-five years. Average time between trauma and definite operation was thirteen days (range 0 to 28 days). All patients underwent triangular osteosynthesis using a combination of a vertical vertebro-pelvic distraction osteosynthesis (pedicle screw system) and a transverse fixation of the sacrum fracture with either iliosacral screws or trans-sacral plating. Immediate postoperative weight-bearing was permitted postoperatively. Nineteen patients were treated with early progressive weight-bearing and advanced to full weight-bearing, on average, after twenty-three days (range 8 to 70 days). Three of the thirty-four patients (9 percent) experienced loosening of hardware, including two patients (6 percent) who required secondary intervention because of loss of the original reduction. Further complications included one pulmonary embolism (3 percent), one iatrogenic nerve lesion (3 percent), one wound necrosis (3 percent), and two local infections (6 percent). Triangular osteosynthesis is a demanding procedure that can be performed on vertically unstable sacral fractures to allow early progressive weight-bearing with an acceptable complication rate.

21 CFR 172.841 - Polydextrose.

Code of Federal Regulations, 2013 CFR

2013-04-01

... consists either of approximately 89 percent D-glucose, 10 percent sorbitol, and 1 percent citric acid or of approximately 90 percent D-glucose, 10 percent sorbitol, and 0.1 percent phosphoric acid, on a weight basis. (2...

21 CFR 172.841 - Polydextrose.

Code of Federal Regulations, 2011 CFR

2011-04-01

... consists either of approximately 89 percent D-glucose, 10 percent sorbitol, and 1 percent citric acid or of approximately 90 percent D-glucose, 10 percent sorbitol, and 0.1 percent phosphoric acid, on a weight basis. (2...

21 CFR 172.841 - Polydextrose.

Code of Federal Regulations, 2012 CFR

2012-04-01

... consists either of approximately 89 percent D-glucose, 10 percent sorbitol, and 1 percent citric acid or of approximately 90 percent D-glucose, 10 percent sorbitol, and 0.1 percent phosphoric acid, on a weight basis. (2...

21 CFR 172.841 - Polydextrose.

Code of Federal Regulations, 2010 CFR

2010-04-01

... consists either of approximately 89 percent D-glucose, 10 percent sorbitol, and 1 percent citric acid or of approximately 90 percent D-glucose, 10 percent sorbitol, and 0.1 percent phosphoric acid, on a weight basis. (2...

40 CFR 98.63 - Calculating GHG emissions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... emissions from anode consumption during electrolysis and anode baking of prebake cells using either the.../metric tons Al). MP = Annual metal production (metric tons Al). Sa = Sulfur content in baked anode (percent weight). Asha = Ash content in baked anode (percent weight). 44/12 = Ratio of molecular weights...

40 CFR 98.63 - Calculating GHG emissions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... emissions from anode consumption during electrolysis and anode baking of prebake cells using either the.../metric tons Al). MP = Annual metal production (metric tons Al). Sa = Sulfur content in baked anode (percent weight). Asha = Ash content in baked anode (percent weight). 44/12 = Ratio of molecular weights...

40 CFR 98.63 - Calculating GHG emissions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... emissions from anode consumption during electrolysis and anode baking of prebake cells using either the.../metric tons Al). MP = Annual metal production (metric tons Al). Sa = Sulfur content in baked anode (percent weight). Asha = Ash content in baked anode (percent weight). 44/12 = Ratio of molecular weights...

40 CFR 98.63 - Calculating GHG emissions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... emissions from anode consumption during electrolysis and anode baking of prebake cells using either the.../metric tons Al). MP = Annual metal production (metric tons Al). Sa = Sulfur content in baked anode (percent weight). Asha = Ash content in baked anode (percent weight). 44/12 = Ratio of molecular weights...

Thermal degradation of ternary blend films containing PVA/chitosan/vanillin

NASA Astrophysics Data System (ADS)

Kasai, Deepak; Chougale, Ravindra; Masti, Saraswati; Narasgoudar, Shivayogi

2018-05-01

The ternary chitosan/poly (vinyl alcohol)/vanillin blend films were prepared by solution casting method. The influence of equal weight percent of poly (vinyl alcohol) and vanillin on thermal stability of the chitosan blend films were investigated by using thermogravimetric analysis (TGA). The kinetic parameters such as enthalpy (ΔH*), entropy (ΔS*), and Gibbs free energy (ΔG*) in the first and second decomposition steps based on the thermogravimetric data were calculated. The thermal stabilities of the blend films were confirmed by thermodynamic parameters obtained in the activation energies, which indicated that increase in the equal weight percent of PVA/vanillin decreased the thermal stability of the chitosan film.

Comparison of Dixon Sequences for Estimation of Percent Breast Fibroglandular Tissue

PubMed Central

Ledger, Araminta E. W.; Scurr, Erica D.; Hughes, Julie; Macdonald, Alison; Wallace, Toni; Thomas, Karen; Wilson, Robin; Leach, Martin O.; Schmidt, Maria A.

2016-01-01

Objectives To evaluate sources of error in the Magnetic Resonance Imaging (MRI) measurement of percent fibroglandular tissue (%FGT) using two-point Dixon sequences for fat-water separation. Methods Ten female volunteers (median age: 31 yrs, range: 23–50 yrs) gave informed consent following Research Ethics Committee approval. Each volunteer was scanned twice following repositioning to enable an estimation of measurement repeatability from high-resolution gradient-echo (GRE) proton-density (PD)-weighted Dixon sequences. Differences in measures of %FGT attributable to resolution, T1 weighting and sequence type were assessed by comparison of this Dixon sequence with low-resolution GRE PD-weighted Dixon data, and against gradient-echo (GRE) or spin-echo (SE) based T1-weighted Dixon datasets, respectively. Results %FGT measurement from high-resolution PD-weighted Dixon sequences had a coefficient of repeatability of ±4.3%. There was no significant difference in %FGT between high-resolution and low-resolution PD-weighted data. Values of %FGT from GRE and SE T1-weighted data were strongly correlated with that derived from PD-weighted data (r = 0.995 and 0.96, respectively). However, both sequences exhibited higher mean %FGT by 2.9% (p < 0.0001) and 12.6% (p < 0.0001), respectively, in comparison with PD-weighted data; the increase in %FGT from the SE T1-weighted sequence was significantly larger at lower breast densities. Conclusion Although measurement of %FGT at low resolution is feasible, T1 weighting and sequence type impact on the accuracy of Dixon-based %FGT measurements; Dixon MRI protocols for %FGT measurement should be carefully considered, particularly for longitudinal or multi-centre studies. PMID:27011312

Self-monitoring and eating-related behaviors are associated with 12-month weight loss in postmenopausal overweight-to-obese women.

PubMed

Kong, Angela; Beresford, Shirley A A; Alfano, Catherine M; Foster-Schubert, Karen E; Neuhouser, Marian L; Johnson, Donna B; Duggan, Catherine; Wang, Ching-Yun; Xiao, Liren; Jeffery, Robert W; Bain, Carolyn E; McTiernan, Anne

2012-09-01

Lifestyle-based interventions, which typically promote various behavior modification strategies, can serve as a setting for evaluating specific behaviors and strategies thought to promote or hinder weight loss. The aim of our study was to test the associations of self-monitoring (ie, self-weighing and food journal completion) and eating-related (ie, dietary intake, diet-related weight-control strategies, and meal patterns) behaviors with weight loss in a sample of postmenopausal overweight-to-obese women enrolled in a 12-month dietary weight loss intervention. Changes in body weight and adoption of self-monitoring and eating-related behaviors were assessed in 123 participants. Generalized linear models tested associations of these behaviors with 12-month weight change after adjusting for potential confounders. Mean percent weight loss was 10.7%. In the final model, completing more food journals was associated with a greater percent weight loss (interquartile range 3.7% greater weight loss; P<0.0001), whereas skipping meals (4.3% lower weight loss; P<0.05) and eating out for lunch (at least once a week, 2.5% lower weight loss; P<0.01) were associated with a lower amount of weight loss. These findings suggest that a greater focus on dietary self-monitoring, home-prepared meals, and consuming meals at regular intervals may improve 12-month weight loss among postmenopausal women enrolled in a dietary weight loss intervention. Copyright © 2012 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

21 CFR 173.65 - Divinylbenzene copolymer.

Code of Federal Regulations, 2010 CFR

2010-04-01

... weight-percent ethyl-vinyl-benzene, and no more than 4 weight-percent nonpolymerizable impurities. (b) In... Archives and Records Administration (NARA). For information on the availability of this material at NARA...

Compound cycle engine for helicopter application

NASA Technical Reports Server (NTRS)

Castor, Jere; Martin, John; Bradley, Curtiss

1987-01-01

The compound cycle engine (CCE) is a highly turbocharged, power-compounded, ultra-high-power-density, lightweight diesel engine. The turbomachinery is similar to a moderate-pressure-ratio, free-power-turbine gas turbine engine and the diesel core is high speed and a low compression ratio. This engine is considered a potential candidate for future military helicopter applications. Cycle thermodynamic specific fuel consumption (SFC) and engine weight analyses performed to establish general engine operating parameters and configurations are presented. An extensive performance and weight analysis based on a typical 2-hour helicopter (+30 minute reserve) mission determined final conceptual engine design. With this mission, CCE performance was compared to that of a contemporary gas turbine engine. The CCE had a 31 percent lower-fuel consumption and resulted in a 16 percent reduction in engine plus fuel and fuel tank weight. Design SFC of the CCE is 0.33 lb/hp-hr and installed wet weight is 0.43 lb/hp. The major technology development areas required for the CCE are identified and briefly discussed.

40 CFR 98.63 - Calculating GHG emissions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... baking of prebake cells using either the procedures in paragraph (d) of this section or the procedures in.../metric tons Al). MP = Annual metal production (metric tons Al). Sa = Sulfur content in baked anode (percent weight). Asha = Ash content in baked anode (percent weight). 44/12 = Ratio of molecular weights...

Descriptive and grade-tonnage models of volcanogenic manganese deposits in oceanic environments; a modification

USGS Publications Warehouse

Mosier, Dan L.; Page, Norman J

1988-01-01

Four types of volcanogenic manganese deposits, distinguished on the basis of geologic, geochemical, and geophysical characteristics, appear to result from a combination of volcanic and hydrothermal processes related to hot-spring activity in oceanic environments. We compare these four desposit types, here called the Franciscan, Cuban, Olympic Peninsula, and Cyprus, with respect to host rocks, associated rocks, minerals, deposit shape, dimensions, volume, tonnage, grade, and mineral-deposit density (number of deposits per unit area). Franciscan-type deposits occur in obducted oceanic ridge and backarc marginal-basin environments, are associated with chert, shale, and graywacke aroun the margins of mafic volcanic centers, and have a median tonnage of 450 t and median grades of 36 weight percent Mn and less than 5.1 weight percent Fe. Cuban-type deposits occur in island-arc environments, are associated with tuff and limestone around domal structures or intrusions inferred to be volcanic centers, and have a median tonnage of 6,400 t and median grades of 39 weight percent Mn and less than 4.4 weight percent Fe. Olympic Peninsula-type deposits occur in obducted oceanic midplate settings, are associated with argillaceous limestone, argillite, and graywacke around mafic volcanic centers (seamounts or islands), and have a median tonnage of 340 t and median grades of 35 weight percent Mn and less than 6.5 weight percent Fe. Cyprus-type deposits occur in the same tectonic environments as Franciscan type but are associated with basalt, marl, chalk, silt, and chert off the ridge-axis position and have a median tonnage of 41,000 t and median grades of 33 weight percent Fe and 8 weight percent Mn. All these deposits are thin ellipsoids, concordant to the host rocks, but Cyprus-and Cuban-type deposits are larger than Franciscan- and Olympic Peninsula-type deposits. Except for Cyprus-type deposits, which are manganiferous iron (umber) deposits composed of hydrated iron and manganese oxides, all volcanogenic manganese deposits contain manganese oxides, silicates, and carbonates. Mineral-deposit densities, along with grade and tonnage information, are useful for estimating the number, size, andgrades of these deposits in resource assessments.

21 CFR 172.841 - Polydextrose.

Code of Federal Regulations, 2014 CFR

2014-04-01

...-glucose, 10 percent sorbitol, and 1 percent citric acid or of approximately 90 percent D-glucose, 10 percent sorbitol, and 0.1 percent phosphoric acid, on a weight basis. (2) Polydextrose may be partially...

Liposuction of the arm concurrent with brachioplasty in the massive weight loss patient: is it safe?

PubMed

Bossert, Ronald P; Dreifuss, Stephanie; Coon, Devin; Wollstein, Adi; Clavijo-Alvarez, Julio; Gusenoff, Jeffrey A; Rubin, J Peter

2013-02-01

Brachioplasty continues to be a sought-after procedure among the massive weight loss population. Residual adiposity of the upper arm can make this procedure more difficult. The authors sought to determine the safety of arm liposuction outside the region of excision with concomitant excisional brachioplasty. Data were analyzed from a prospective registry of massive weight loss patients who underwent brachioplasty alone or with concurrent arm liposuction. Variables examined included age, sex, body mass index, method of weight loss, medical comorbidities, and smoking status. Outcomes included complications such as seroma, wound dehiscence, infection, hematoma, lymphedema, and need for revision. Multivariate analyses were performed to assess outcome measures. One hundred forty-four patients (139 women and five men; mean body mass index, 29.6 ± 4.1 kg/m; mean age, 46 ± 10.7 years) underwent brachioplasty. Sixty-four patients had concomitant arm liposuction at the time of brachioplasty. The remaining 80 patients underwent excisional brachioplasty alone. Despite significantly higher operative body mass indices among those undergoing concurrent liposuction, no significant differences in complication rates were seen between the liposuction and excision-alone cohorts for seroma (19.1 percent versus 23.1 percent), wound dehiscence (7.9 percent versus 2.6 percent), infection (4.8 percent versus 6.4 percent), hematoma (3.2 percent versus 0 percent), or lymphedema (3.2 percent versus 1.3 percent). Revision rates were similar between the two groups (9.5 percent with liposuction and 8.9 percent without liposuction). Liposuction can be performed safely and effectively outside the region of excision at the time of brachioplasty without the need for prior debulking or staged arm-contouring procedures. Therapeutic, III.

Enoxaparin versus unfractionated heparin with fibrinolysis for ST-elevation myocardial infarction.

PubMed

Antman, Elliott M; Morrow, David A; McCabe, Carolyn H; Murphy, Sabina A; Ruda, Mikhail; Sadowski, Zygmunt; Budaj, Andrzej; López-Sendón, Jose L; Guneri, Sema; Jiang, Frank; White, Harvey D; Fox, Keith A A; Braunwald, Eugene

2006-04-06

Unfractionated heparin is often used as adjunctive therapy with fibrinolysis in patients with ST-elevation myocardial infarction. We compared a low-molecular-weight heparin, enoxaparin, with unfractionated heparin for this purpose. We randomly assigned 20,506 patients with ST-elevation myocardial infarction who were scheduled to undergo fibrinolysis to receive enoxaparin throughout the index hospitalization or weight-based unfractionated heparin for at least 48 hours. The primary efficacy end point was death or nonfatal recurrent myocardial infarction through 30 days. The primary end point occurred in 12.0 percent of patients in the unfractionated heparin group and 9.9 percent of those in the enoxaparin group (17 percent reduction in relative risk, P<0.001). Nonfatal reinfarction occurred in 4.5 percent of the patients receiving unfractionated heparin and 3.0 percent of those receiving enoxaparin (33 percent reduction in relative risk, P<0.001); 7.5 percent of patients given unfractionated heparin died, as did 6.9 percent of those given enoxaparin (P=0.11). The composite of death, nonfatal reinfarction, or urgent revascularization occurred in 14.5 percent of patients given unfractionated heparin and 11.7 percent of those given enoxaparin (P<0.001); major bleeding occurred in 1.4 percent and 2.1 percent, respectively (P<0.001). The composite of death, nonfatal reinfarction, or nonfatal intracranial hemorrhage (a measure of net clinical benefit) occurred in 12.2 percent of patients given unfractionated heparin and 10.1 percent of those given enoxaparin (P<0.001). In patients receiving fibrinolysis for ST-elevation myocardial infarction, treatment with enoxaparin throughout the index hospitalization is superior to treatment with unfractionated heparin for 48 hours but is associated with an increase in major bleeding episodes. These findings should be interpreted in the context of net clinical benefit. (ClinicalTrials.gov number, NCT00077792.). Copyright 2006 Massachusetts Medical Society.

Associations among eating regulation and body mass index, weight, and body fat in college students: the moderating role of gender.

PubMed

Gropper, Sareen S; Arsiwalla, Dilbur D; Lord, Denali C; Huggins, Kevin W; Simmons, Karla P; Ulrich, Pamela V

2014-04-01

This study investigated associations between eating regulation behaviors and body mass index (BMI), weight, and percent body fat in male and female students over the first two years of college. Subjects included 328 college students (215 females and 113 males). Height and weight (via standard techniques), body composition (via bioelectrical impedance analysis), and eating regulation behaviors (using the Regulation of Eating Behavior Scale) were conducted two to three times during both the freshman and sophomore years. Significant associations between eating regulation and BMI, weight, and/or percent body fat were shown mostly in females. In females, higher BMI, weight, and/or percent body fat at the end of the second year of college were found in those with low levels of autonomous, intrinsic motivation, and identified regulation, and high levels of amotivation, while lower BMI, weight, and/or percent body fat were associated with high levels of autonomous, intrinsic motivation, and identified regulation, and low levels of amotivation. The findings that specific eating behaviors in females during the first two years of college influence BMI, weight, and/or percent body fat may be useful for inclusion in university programs focused on college student health to help decrease the risk of obesity and disordered eating/eating disorders in female college students. Copyright © 2014 Elsevier Ltd. All rights reserved.

Performance of transonic fan stage with weight flow per unit annulus area of 208 kilograms per second per square meter (42.6 (lb/sec)/sq ft)

NASA Technical Reports Server (NTRS)

Urasek, D. C.; Kovich, G.; Moore, R. D.

1973-01-01

Performance was obtained for a 50-cm-diameter compressor designed for a high weight flow per unit annulus area of 208 (kg/sec)/sq m. Peak efficiency values of 0.83 and 0.79 were obtained for the rotor and stage, respectively. The stall margin for the stage was 23 percent, based on equivalent weight flow and total-pressure ratio at peak efficiency and stall.

Better load-weight distribution is needed for tandem-axle logging trucks

Treesearch

John E. Baumgras

1976-01-01

To determine the GVW and axle weights of tandem-axle logging trucks hauling into two West Virginia sawmills, 543 truckloads of hardwood sawlogs were weighed. The results showed that less than 2 percent of the truckloads exceeded the 48,000 pound GVW limit. While 58 percent of the truckloads exceeded the 32,000 pound tandem-axle weight limit, the front-axle weights...

High-temperature molten salt thermal energy storage systems for solar applications

NASA Technical Reports Server (NTRS)

Petri, R. J.; Claar, T. D.; Ong, E.

1983-01-01

Experimental results of compatibility screening studies of 100 salt/containment/thermal conductivity enhancement (TCE) combinations for the high temperature solar thermal application range of 704 deg to 871 C (1300 to 1600 F) are presented. Nine candidate containment/HX alloy materials and two TCE materials were tested with six candidate solar thermal alkali and alkaline earth carbonate storage salts (both reagent and technical grade of each). Compatibility tests were conducted with salt encapsulated in approx. 6.0 inch x 1 inch welded containers of test material from 300 to 3000 hours. Compatibility evaluations were end application oriented, considering the potential 30 year lifetime requirement of solar thermal power plant components. Analyses were based on depth and nature of salt side corrosion of materials, containment alloy thermal aging effects, weld integrity in salt environment, air side containment oxidation, and chemical and physical analyses of the salt. A need for more reliable, and in some cases first time determined thermophysical and transport property data was also identified for molten carbonates in the 704 to 871 C temperature range. In particular, accurate melting point (mp) measurements were performed for Li2CO3 and Na2CO3 while melting point, heat of fusion, and specific heat determinations were conducted on 81.3 weight percent Na2CO3-18.7 weight percent K2CO3 and 52.2 weight percent BaCO3-47.8 weight percent Na2CO3 to support future TES system design and ultimate scale up of solar thermal energy storage (TES) subsystems.

27 CFR 21.63 - Formula No. 36.

Code of Federal Regulations, 2012 CFR

2012-04-01

... pounds of caustic soda, liquid grade, containing 50 percent sodium hydroxide by weight; or 12.0 pounds of caustic soda, liquid grade, containing 73 percent sodium hydroxide by weight. (b) Authorized uses. (1) As...

27 CFR 21.63 - Formula No. 36.

Code of Federal Regulations, 2014 CFR

2014-04-01

... pounds of caustic soda, liquid grade, containing 50 percent sodium hydroxide by weight; or 12.0 pounds of caustic soda, liquid grade, containing 73 percent sodium hydroxide by weight. (b) Authorized uses. (1) As...

27 CFR 21.63 - Formula No. 36.

Code of Federal Regulations, 2013 CFR

2013-04-01

... pounds of caustic soda, liquid grade, containing 50 percent sodium hydroxide by weight; or 12.0 pounds of caustic soda, liquid grade, containing 73 percent sodium hydroxide by weight. (b) Authorized uses. (1) As...

21 CFR 177.2415 - Poly(aryletherketone) resins.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., and have a minimum weight-average molecular weight of 12,000, as determined by gel permeation...: Distilled water, 50 percent (by volume) ethanol in distilled water, 3 percent acetic acid in distilled water...

Ethanol extraction of phytosterols from corn fiber

DOEpatents

Abbas, Charles; Beery, Kyle E.; Binder, Thomas P.; Rammelsberg, Anne M.

2010-11-16

The present invention provides a process for extracting sterols from a high solids, thermochemically hydrolyzed corn fiber using ethanol as the extractant. The process includes obtaining a corn fiber slurry having a moisture content from about 20 weight percent to about 50 weight percent solids (high solids content), thermochemically processing the corn fiber slurry having high solids content of 20 to 50% to produce a hydrolyzed corn fiber slurry, dewatering the hydrolyzed corn fiber slurry to achieve a residual corn fiber having a moisture content from about 30 to 80 weight percent solids, washing the residual corn fiber, dewatering the washed, hydrolyzed corn fiber slurry to achieve a residual corn fiber having a moisture content from about 30 to 80 weight percent solids, and extracting the residual corn fiber with ethanol and separating at least one sterol.

Medial thigh lift in the massive weight loss population: outcomes and complications.

PubMed

Gusenoff, Jeffrey A; Coon, Devin; Nayar, Harry; Kling, Russell E; Rubin, J Peter

2015-01-01

Complication profiles of medial thighplasty in the massive weight loss population are not well described. The authors present their experience with these procedures in the massive weight loss population. Thighplasty patients from 2003 to 2012 were assessed. Variables included age, sex, body mass index, method of weight loss, comorbidities, and smoking status. Outcomes included seroma, dehiscence, infection, hematoma, edema, and revision. Statistical analysis was performed as appropriate. One hundred six subjects (90 women and 16 men) underwent thighplasty. Fourteen patients underwent horizontal thighplasty, with a complication rate of 43 percent; 24 underwent short-scar thighplasty, with a complication rate of 67 percent; and 68 underwent full-length vertical thighplasty, with a complication rate of 74 percent. Seventy-two subjects (68 percent) had at least one complication. Complications included dehiscence (51 percent), seroma (25 percent), infection (16 percent), and hematoma (6 percent). Overall, 25 patients (23 percent) developed edema, which did not resolve in two patients by 12 months. Hypertension was significantly associated with postoperative seroma (p = 0.02). Age (p = 0.01), hypothyroidism (p = 0.01), and liposuction outside the area of resection (p = 0.025) were associated with postoperative infections. A full-length vertical incision was associated with increased lower extremity edema (p = 0.007). Medial thighplasty has a high rate of minor wound healing problems. Full-length vertical thighplasty is associated with prolonged edema. Concomitant liposuction may also increase complications. Patients should be counseled appropriately about the potential for minor wound healing problems. Therapeutic, III.

Pyrolytic conversion of plastic and rubber waste to hydrocarbons with basic salt catalysts

DOEpatents

Wingfield, Jr., Robert C.; Braslaw, Jacob; Gealer, Roy L.

1985-01-01

The invention relates to a process for improving the pyrolytic conversion of waste selected from rubber and plastic to low molecular weight olefinic materials by employing basis salt catalysts in the waste mixture. The salts comprise alkali or alkaline earth compounds, particularly sodium carbonate, in an amount of greater than about 1 weight percent based on the waste feed.

Improved Supercritical-Solvent Extraction of Coal

NASA Technical Reports Server (NTRS)

Compton, L.

1982-01-01

Raw coal upgraded by supercritical-solvent extraction system that uses two materials instead of one. System achieved extraction yields of 20 to 49 weight percent. Single-solvent yields are about 25 weight percent. Experimental results show extraction yields may be timedependent. Observed decreases in weight of coal agreed well with increases in ash content of residue.

40 CFR 63.5830 - What are my options for meeting the standards for pultrusion operations subject to the 60 weight...

Code of Federal Regulations, 2010 CFR

2010-07-01

... standards for pultrusion operations subject to the 60 weight percent organic HAP emissions reductions... National Emissions Standards for Hazardous Air Pollutants: Reinforced Plastic Composites Production Options... operations subject to the 60 weight percent organic HAP emissions reductions requirement? You must use one or...

Steady induction effects in geomagnetism. Part 1C: Geomagnetic estimation of steady surficial core motions: Application to the definitive geomagnetic reference field models

NASA Technical Reports Server (NTRS)

Voorhies, Coerte V.

1993-01-01

In the source-free mantle/frozen-flux core magnetic earth model, the non-linear inverse steady motional induction problem was solved using the method presented in Part 1B. How that method was applied to estimate steady, broad-scale fluid velocity fields near the top of Earth's core that induce the secular change indicated by the Definitive Geomagnetic Reference Field (DGRF) models from 1945 to 1980 are described. Special attention is given to the derivation of weight matrices for the DGRF models because the weights determine the apparent significance of the residual secular change. The derived weight matrices also enable estimation of the secular change signal-to-noise ratio characterizing the DGRF models. Two types of weights were derived in 1987-88: radial field weights for fitting the evolution of the broad-scale portion of the radial geomagnetic field component at Earth's surface implied by the DGRF's, and general weights for fitting the evolution of the broad-scale portion of the scalar potential specified by these models. The difference is non-trivial because not all the geomagnetic data represented by the DGRF's constrain the radial field component. For radial field weights (or general weights), a quantitatively acceptable explication of broad-scale secular change relative to the 1980 Magsat epoch must account for 99.94271 percent (or 99.98784 percent) of the total weighted variance accumulated therein. Tolerable normalized root-mean-square weighted residuals of 2.394 percent (or 1.103 percent) are less than the 7 percent errors expected in the source-free mantle/frozen-flux core approximation.

Association between cesarean delivery rate and body mass index.

PubMed

Berendzen, Jodi A; Howard, Bobby C

2013-01-01

The purpose of this study was to evaluate the association between cesarean delivery rate and body mass index (BMI) for the patient population served by the University of Tennessee Medical Center in Knoxville, TN. A retrospective, cohort study was conducted using the perinatal birthlog fromJanuary 1, 2009 through December 31, 2009. The database totaled 2,399 women. Women who delivered > or = 23 weeks gestational age were included. Those missing data imperative to our study (height, weight, mode of delivery) were excluded. Thus, our study included 2,235 women. Cesarean delivery rate was calculated for each of the five BMI categories. Univariate analysis using Chi square, Mann-Whitney U test and independent t-test were used to describe associations between body mass index, mode of delivery and other independent variables. Additional analyses were made on the subset of nulliparous women. Using prepregnancy BMI, 6.7 percent of our population was underweight, 44.3 percent normal weight, 22.6 percent overweight, 20.6 percent obese, and 5.8 percent morbidly obese. The overall cesarean delivery rate was 36.2 percent. Twenty-six percent of underweight and 31.4 percent of normal weight women required cesarean delivery, while 39.1 percent of overweight, 40.8 percent of obese and 56.6 percent of morbidly obese women required cesarean delivery. In addition to cesarean delivery, hypertensive disorders (OR 3.29; 95% CI 2.51-4.31) and diabetes (OR 5.27; 95% CI 3.73-7.44) complicated significantly more pregnancies of obese women than normal weight women. There was an increased rate of cesarean delivery as BMI increased. Increased BMI is also associated with other pregnancy complications, including hypertensive disorders and diabetes.

Fiber-Reinforced Reactive Nano-Epoxy Composites

NASA Technical Reports Server (NTRS)

Zhong, Wei-Hong

2011-01-01

An ultra-high-molecular-weight polyethylene/ matrix interface based on the fabrication of a reactive nano-epoxy matrix with lower surface energy has been improved. Enhanced mechanical properties versus pure epoxy on a three-point bend test include: strength (25 percent), modulus (20 percent), and toughness (30 percent). Increased thermal properties include higher Tg (glass transition temperature) and stable CTE (coefficient of thermal expansion). Improved processability for manufacturing composites includes faster wetting rates on macro-fiber surfaces, lower viscosity, better resin infusion rates, and improved rheological properties. Improved interfacial adhesion properties with Spectra fibers by pullout tests include initial debonding force of 35 percent, a maximum pullout force of 25 percent, and energy to debond at 65 percent. Improved mechanical properties of Spectra fiber composites (tensile) aging resistance properties include hygrothermal effects. With this innovation, high-performance composites have been created, including carbon fibers/nano-epoxy, glass fibers/nano-epoxy, aramid fibers/ nano-epoxy, and ultra-high-molecularweight polyethylene fiber (UHMWPE).

77 FR 54900 - Aluminum Extrusions From the People's Republic of China: Final Results of Changed Circumstances...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-06

..., with manganese accounting for not more than 3.0 percent of total materials by weight. The subject... number 6 contains magnesium and silicon as the major alloying elements, with magnesium accounting for at least 0.1 percent but not more than 2.0 percent of total materials by weight, and silicon accounting for...

12 CFR 217.152 - Simple risk weight approach (SRWA).

Code of Federal Regulations, 2014 CFR

2014-01-01

... than or equal to -1 (that is, between zero and -1), then E equals the absolute value of RVC. If RVC is... this section. (1) Zero percent risk weight equity exposures. An equity exposure to an entity whose credit exposures are exempt from the 0.03 percent PD floor in § 217.131(d)(2) is assigned a zero percent...

Candidate soil indicators for monitoring the progress of constructed wetlands toward a natural state: a statistical approach

USGS Publications Warehouse

Stapanian, Martin A.; Adams, Jean V.; Fennessy, M. Siobhan; Mack, John; Micacchion, Mick

2013-01-01

A persistent question among ecologists and environmental managers is whether constructed wetlands are structurally or functionally equivalent to naturally occurring wetlands. We examined 19 variables collected from 10 constructed and nine natural emergent wetlands in Ohio, USA. Our primary objective was to identify candidate indicators of wetland class (natural or constructed), based on measurements of soil properties and an index of vegetation integrity, that can be used to track the progress of constructed wetlands toward a natural state. The method of nearest shrunken centroids was used to find a subset of variables that would serve as the best classifiers of wetland class, and error rate was calculated using a five-fold cross-validation procedure. The shrunken differences of percent total organic carbon (% TOC) and percent dry weight of the soil exhibited the greatest distances from the overall centroid. Classification based on these two variables yielded a misclassification rate of 11% based on cross-validation. Our results indicate that % TOC and percent dry weight can be used as candidate indicators of the status of emergent, constructed wetlands in Ohio and for assessing the performance of mitigation. The method of nearest shrunken centroids has excellent potential for further applications in ecology.

Reduction in food away from home is associated with improved child relative weight and body composition outcomes and this relation is mediated by changes in diet quality.

PubMed

Altman, Myra; Cahill Holland, Jodi; Lundeen, Delaney; Kolko, Rachel P; Stein, Richard I; Saelens, Brian E; Welch, R Robinson; Perri, Michael G; Schechtman, Kenneth B; Epstein, Leonard H; Wilfley, Denise E

2015-09-01

Reducing consumption of food away from home is often targeted during pediatric obesity treatment, given the associations with weight status and gain. However, the effects of this dietary change on weight loss are unknown. Our aim was to evaluate associations between changes in dietary factors and child anthropometric outcomes after treatment. It is hypothesized that reduced consumption of food away from home will be associated with improved dietary intake and greater reductions in anthropometric outcomes (standardized body mass index [BMI] and percent body fat), and the relationship between food away from home and anthropometric outcomes will be mediated by improved child dietary intake. We conducted a longitudinal evaluation of associations between dietary changes and child anthropometric outcomes. Child diet (three 24-hour recalls) and anthropometric data were collected at baseline and 16 weeks. Participants were 170 overweight and obese children ages 7 to 11 years who completed a 16-week family-based behavioral weight-loss treatment as part of a larger multi-site randomized controlled trial conducted in two cohorts between 2010 and 2011 (clinical research trial). Dietary treatment targets during family-based behavioral weight-loss treatment included improving diet quality and reducing food away from home. The main outcome measures in this study were child relative weight (standardized BMI) and body composition (percent body fat). We performed t tests and bootstrapped single-mediation analyses adjusting for relevant covariates. As hypothesized, decreased food away from home was associated with improved diet quality and greater reductions in standardized BMI (P<0.05) and percent body fat (P<0.01). Associations between food away from home and anthropometric outcomes were mediated by changes in diet quality. Specifically, change in total energy intake and added sugars mediated the association between change in food away from home and standardized BMI, and change in overall diet quality, fiber, added sugars, and added fats mediated the association between change in food away from home and percent body fat. Including physical activity as a covariate did not significantly impact these findings. These results suggest that reducing food away from home can be an important behavioral target for affecting positive changes in both diet quality and anthropometric outcomes during treatment. Copyright © 2015 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Relationship between alcohol intake, body fat, and physical activity – a population-based study

PubMed Central

Liangpunsakul, Suthat; Crabb, David W.; Qi, Rong

2010-01-01

Objectives Aside from fat, ethanol is the macronutrient with the highest energy density. Whether the energy derived from ethanol affects the body composition and fat mass is debatable. We investigated the relationship between alcohol intake, body composition, and physical activity in the US population using the third National Health and Nutrition Examination Survey (NHANES III). Methods Ten thousand five hundred and fifty subjects met eligible criteria and constituted our study cohort. Estimated percent body fat and resting metabolic rate were calculated based on the sum of the skinfolds. Multivariate regression analyses were performed accounting for the study sampling weight. Results In both genders, moderate and hazardous alcohol drinkers were younger (p<0.05), had significantly lower BMI (P<0.01) and body weight (p<0.01) than controls, non drinkers. Those with hazardous alcohol consumption had significantly less physical activity compared to those with no alcohol use and moderate drinkers in both genders. Female had significantly higher percent body fat than males. In the multivariate linear regression analyses, the levels of alcohol consumption were found to be an independent predictor associated with lower percent body fat only in male subjects. Conclusions Our results showed that alcoholics are habitually less active and that alcohol drinking is an independent predictor of lower percent body fat especially in male alcoholics. PMID:20696406

7 CFR 52.3184 - Grades of dried prunes.

Code of Federal Regulations, 2012 CFR

2012-01-01

... affected by: Not more than 5 percent, by weight, may be affected by: Off-color. End cracks. 1 Skin or flesh... weight, may be affected by: Not more than 1 percent, by weight, may be affected by: Off-color. Poor texture. Mold. Decay. Poor texture. End cracks. Dirt. End cracks. Skin or flesh Foreign material. Skin or...

16 CFR 303.43 - Fiber content tolerances.

Code of Federal Regulations, 2010 CFR

2010-01-01

... as to fiber content percentages if the percentages by weight of any fibers present in the total fiber... stated on the label in excess of 3 percent of the total fiber weight of the product. For example, where... fiber present may vary from a minimum of 37 percent of the total fiber weight of such product to a...

12 CFR 324.52 - Simple risk-weight approach (SRWA).

Code of Federal Regulations, 2014 CFR

2014-01-01

... greater than or equal to −1 (that is, between zero and −1), then E equals the absolute value of RVC. If...) Zero percent risk weight equity exposures. An equity exposure to a sovereign, the Bank for..., an MDB, and any other entity whose credit exposures receive a zero percent risk weight under § 324.32...

77 FR 71776 - Certain Steel Threaded Rod From the People's Republic of China: Affirmative Preliminary...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-04

... more chromium, by weight, produced by Gem-Year Industrial Co., Ltd. (``Gem- Year''), and otherwise... greater than 1.25 percent chromium, by weight, and otherwise meeting the requirements of the scope of the... threaded rod products with 1.25 percent or more chromium, by weight, produced by Gem-Year, and otherwise...

Preliminary investigation of zirconium boride ceramals for gas-turbine blade applications

NASA Technical Reports Server (NTRS)

Hoffman, Charles A

1953-01-01

Zirconium boride ZrB2 ceramals were investigated for possible gas-turbine-blade application. Included in the study were thermal shock evaluations of disks, preliminary turbine-blade operation, and observations of oxidation resistance. Thermal shock disks of the following three compositions were studied: (a) 97.5 percent ZrB2 plus 2.5 percent B by weight; (b) 92.5 percent ZrB2 plus 7.5 percent B by weight; and (c) 100 percent ZrB2. Thermal shock disks were quenched from temperatures of 1800 degrees, 2000 degrees, 2200 degrees, and 2400 degrees F. The life of turbine blades containing 93 percent ZrB2 plus 7 percent B by weight was determined in gas-turbine tests. The blades were run at approximately 1600 degrees F and 15,000 to 26,000 rpm. The thermal shock resistance of the 97.5 percent ZrB2 plus 2.5 percent boron ceramals compares favorably with that of TiC plus Co and TiC plus Ni ceramals. Oxidation of the disks during the thermal shock evaluation was slight for the comparatively short time (8.3 hr) up through 2000 degrees F. Oxidation of a specimen was severe, however, after 100 hours at 2000 degrees F. The turbine blade performance evaluation of the 93 percent ZrB2 plus 7 percent B composition was preliminary in scope ; no conclusions can be drawn.

21 CFR 175.365 - Vinylidene chloride copolymer coatings for polycarbonate film.

Code of Federal Regulations, 2014 CFR

2014-04-01

... conditions: (a) The coating is applied as a continuous film over one or both sides of a base film produced... acrylate, and acrylic acid. The finished copolymers contain at least 50 weight-percent of polymer units...

Differentiation of Asteroid 4 Vesta: Core Formation by Iron Rain in a Silicate Magma Ocean

NASA Technical Reports Server (NTRS)

Kiefer, Walter S.; Mittlefehldt, David W.

2017-01-01

Geochemical observations of the eucrite and diogenite meteorites, together with observations made by NASA's Dawn spacecraft while orbiting asteroid 4 Vesta, suggest that Vesta resembles H chondrites in bulk chemical composition, possible with about 25 percent of a CM-chondrite like composition added in. For this model, the core is 15 percent by mass (or 8 percent by volume) of the asteroid, with a composition of 73.7 percent by weight Fe, 16.0 percent by weight S, and 10.3 percent by weight Ni. The abundances of moderately siderophile elements (Ni, Co, Mo, W, and P) in eucrites require that essentially all of the metallic phase in Vesta segregated to form a core prior to eucrite solidification. The combination of the melting phase relationships for the silicate and metal phases, together with the moderately siderophile element concentrations together require that complete melting of the metal phase occurred (temperature is greater than1350 degrees Centigrade), along with substantial (greater than 40 percent) melting of the silicate material. Thus, core formation on Vesta occurs as iron rain sinking through a silicate magma ocean.

7 CFR 810.206 - Grades and grade requirements for barley.

Code of Federal Regulations, 2010 CFR

2010-01-01

... weight per bushel (pounds) Sound barley (percent) Maximum Limits of— Damaged kernels 1 (percent) Heat damaged kernels (percent) Foreign material (percent) Broken kernels (percent) Thin barley (percent) U.S... or otherwise of distinctly low quality. 1 Includes heat-damaged kernels. Injured-by-frost kernels and...

Multibody aircraft study, volume 2

NASA Technical Reports Server (NTRS)

Moore, J. W.; Craven, E. P.; Farmer, B. T.; Honrath, J. F.; Stephens, R. E.; Bronson, C. E., Jr.; Meyer, R. T.; Hogue, J. G.

1981-01-01

The potential benefits of a multibody aircraft when compared to a single body aircraft are presented. The analyses consist principally of a detailed point design analysis of three multibody and one single body aircraft, based on a selected payload of 350,000 kg (771,618 lb), for final aircraft definitions; sensitivity studies to evaluate the effects of variations in payload, wing semispan body locations, and fuel price; recommendations as to the research and technology requirements needed to validate the multibody concept. Two, two body, one, three body, and one single body aircraft were finalized for the selected payload, with DOC being the prime figure of merit. When compared to the single body, the multibody aircraft showed a reduction in DOC by as much as 11.3 percent. Operating weight was reduced up to 14 percent, and fly away cost reductions ranged from 8.6 to 13.4 percent. Weight reduction, hence cost, of the multibody aircraft resulted primarily from the wing bending relief afforded by the bodies being located outboard on the wing.

Shuttle-food consumption, body composition and body weight in women

NASA Technical Reports Server (NTRS)

Lane, Helen W.; Frye, Sherrie; Kloeris, Vickie; Rice, Barbara; Siconolfi, Steven F.; Spector, Elisabeth; Gretebeck, Randall J.

1992-01-01

An experiment is conducted to determine whether the NASA Space Shuttle food system can provide the food and fluid required to mitigate weight loss and physical decomposition in 12 female subjects for 28 days. Subjects receive only foods from the Space Shuttle system for four weeks within an 11-wk monitoring period. Dual-energy X-ray absorptiometry is employed throughout the trial period to study lean body mass, percent body fat, and energy-intake levels with attention given to differences the experimental diet and the subjects' typical diet. Percent body fat is found to change significantly with losses of less than 0.05 percent, whereas energy intake based on autonomous diet choices by the participants does not vary significantly. Lean body mass remains unchanged throughout the study in which the subjects receive a relatively low-fat and low-protein menu. The 100 items on the space shuttle list of approved food items are shown to provide a palatable dietary framework for maintaining the health of female astronauts.

Multibody aircraft study, volume 1

NASA Technical Reports Server (NTRS)

Moore, J. W.; Craven, E. P.; Farmer, B. T.; Honrath, J. F.; Stephens, R. E.; Bronson, C. E., Jr.; Meyer, R. T.; Hogue, J. H.

1982-01-01

The potential benefits of a multibody aircraft when compared to a single body aircraft are presented. The analyses consist principally of a detailed point design analysis of three multibody and one single body aircraft, based on a selected payload of 350,000 kg (771,618 lb), for final aircraft definitions; sensitivity studies to evaluate the effects of variations in payload, wing semispan body locations, and fuel price; recommendations as to the research and technology requirements needed to validate the multibody concept. Two, two body, one, three body, and one single body aircraft were finalized for the selected payload, with DOC being the prime figure of merit. When compared to the single body, the multibody aircraft showed a reduction in DOC by as much as 11.3 percent. Operating weight was reduced up to 14 percent, and fly away cost reductions ranged from 8.6 to 13.4 percent. Weight reduction, hence cost, of the multibody aircraft resulted primarily from the wing bending relief afforded by the bodies being located outboard on the wing.

County-level racial prejudice and the black-white gap in infant health outcomes.

PubMed

Orchard, Jacob; Price, Joseph

2017-05-01

Black mothers are 60 percent more likely than white mothers to have preterm births and twice as likely to have a baby with low birth weight. We examine whether these black-white gaps in birth outcomes are larger in counties with higher levels of racial prejudice. We use data from the restricted-use natality files in the United States, which provide information on birth weight, gestation, and maternal characteristics for over 31 million births from 2002 to 2012, combined with county-level data measures of both explicit and implicit racial prejudice from Project Implicit from over a million individuals who took the Implicit Association Test during this same period. We compare counties that are one standard deviation above the mean (high prejudice) with those that are one standard deviation below the mean (low prejudice) in terms of their average level of racial prejudice. The black-white gap in low birth weight is 14 percent larger in counties with high implicit racial prejudice compared to counties with low prejudice. The black-white gap in preterm births is 29 percent larger in the high prejudice counties. The gaps are even larger when we use explicit measures of racial prejudice with high prejudice counties having a black-white gap that is 22 percent larger for low birth weight and 36 percent larger for preterm births. These relationships do not appear to be biased by the way the prejudice sample is constructed, since the racial gap in birth outcomes is unrelated to other county-level biases such as those based on gender or sexual orientation. The black-white gap in United States' birth outcomes is larger in those counties that have the highest levels of racial prejudice. This is true for both implicit and explicit racial prejudice, though the strength of the relationship is strongest for explicit racial prejudice. Copyright © 2017 Elsevier Ltd. All rights reserved.

Vapor pressures and calculated heats of vaporization of concentrated nitric acid solutions in the composition range 71 to 89 percent nitrogen dioxide, 1 to 10 percent water, and in the temperature range 10 to 60 degrees C

NASA Technical Reports Server (NTRS)

Mckeown, A B; Belles, Frank E

1954-01-01

Total vapor pressures were measured for 16 acid mixtures of the ternary system nitric acid, nitrogen dioxide, and water within the temperature range 10 degrees to 60 degrees Celsius, and with the composition range 71 to 89 weight percent nitric acid, 7 to 20 weight percent nitrogen dioxide, and 1 to 10 weight percent water. Heats of vaporization were calculated from the vapor pressure measurements for each sample for the temperatures 25, 40, and 60 degrees Celsius. The ullage of the apparatus used for the measurements was 0.46. Ternary diagrams showing isobars as a function of composition of the system were constructed from experimental and interpolated data for the temperatures 25, 40, 45, and 60 degrees C and are presented herein.

Characterization and Air Drying of Chunkwood and Chips

Treesearch

Joseph B. Sturos

1984-01-01

Chunkwood was found to be composed of a few large particles and many small particles with the large particles constituting almost half the total weight. More than 75 percent of the chunk weight was composed of particles weighing more than 100 grams (ovendry), while 85 percent of the chip weight was composed of particles weighing 3 grams or less. Energy densities...

49 CFR 393.42 - Brakes required on all wheels.

Code of Federal Regulations, 2010 CFR

2010-10-01

... subject to this part is not required to be equipped with brakes if the axle weight of the towed vehicle does not exceed 40 percent of the sum of the axle weights of the towing vehicle. (4) Any full trailer... of the towed vehicle does not exceed 40 percent of the sum of the axle weights of the towing vehicle...

49 CFR Appendix D to Part 173 - Test Methods for Dynamite (Explosive, Blasting, Type A)

Code of Federal Regulations, 2011 CFR

2011-10-01

... weighed to determine the percent of weight loss. 3. Test method D-3—Compression Exudation Test The entire... from the glass tube and weighed to determine the percent of weight loss. EC02MR91.067 ... assembly is placed under the compression rod, and compression is applied by means of the weight on the...

The Use of Biosimulation in the Design of a Novel Multi-level Weight Loss Maintenance Program for Overweight Children

PubMed Central

Wilfley, Denise E.; Van Buren, Dorothy J.; Theim, Kelly R.; Stein, Richard I.; Saelens, Brian E.; Ezzet, Farkad; Russian, Angela C.; Perri, Michael G.; Epstein, Leonard H.

2011-01-01

Objective Weight loss outcomes achieved through conventional behavior change interventions are prone to deterioration over time. Basic learning laboratory studies in the area of behavioral extinction and renewal and multi-level models of weight control offer clues as to why newly acquired weight loss skills are prone to relapse. According to these models, current clinic-based interventions may not be of sufficient duration or scope to allow for the practice of new skills across the multiple community contexts necessary to promote sustainable weight loss. Although longer, more intensive interventions with greater reach may hold the key to improving weight loss outcomes, it is difficult to test these assumptions in a time efficient and cost-effective manner. A research design tool that has been increasingly utilized in other fields (e.g., pharmaceuticals) is the use of biosimulation analyses. The present paper describes our research team's use of computer simulation models to assist in designing a study to test a novel, comprehensive socio-environmental treatment approach to weight loss maintenance in children ages 7 to 12 years. Methods Weight outcome data from the weight loss, weight maintenance, and follow-up phases of a recently completed randomized controlled trial (RCT) were used to describe the time course of a proposed, extended multi-level treatment program. Simulations were then conducted to project the expected changes in child percent overweight trajectories in the proposed study. Results A 12.9% decrease in percent overweight at 30 months was estimated based upon the midway point between models of “best-case” and “worst-case” weight maintenance scenarios. Conclusions Preliminary data and further analyses, including biosimulation projections, suggest that our socio-environmental approach to weight loss maintenance treatment is promising and warrants evaluation in a large-scale RCT. Biosimulation techniques may have utility in the design of future community-level interventions for the treatment and prevention of childhood overweight. PMID:20107468

Evaluation of the percent of overloaded vehicles receiving proper permits.

DOT National Transportation Integrated Search

2015-05-01

All state agencies have truck size and weight restrictions on their roadways based on federal and state : legislation. However, drivers can typically apply for special permits allowing those limits to be exceeded, : particularly when the load is non-...

49 CFR 173.57 - Acceptance criteria for new explosives.

Code of Federal Regulations, 2011 CFR

2011-10-01

... (Test Method D-3 in appendix D to this part), a non-gelatin dynamite loses more than 3 percent by weight of the liquid explosive or a gelatin dynamite loses more than 10 percent by weight of the liquid...

49 CFR 173.57 - Acceptance criteria for new explosives.

Code of Federal Regulations, 2012 CFR

2012-10-01

... (Test Method D-3 in appendix D to this part), a non-gelatin dynamite loses more than 3 percent by weight of the liquid explosive or a gelatin dynamite loses more than 10 percent by weight of the liquid...

49 CFR 173.57 - Acceptance criteria for new explosives.

Code of Federal Regulations, 2014 CFR

2014-10-01

... (Test Method D-3 in appendix D to this part), a non-gelatin dynamite loses more than 3 percent by weight of the liquid explosive or a gelatin dynamite loses more than 10 percent by weight of the liquid...

49 CFR 173.57 - Acceptance criteria for new explosives.

Code of Federal Regulations, 2013 CFR

2013-10-01

... (Test Method D-3 in appendix D to this part), a non-gelatin dynamite loses more than 3 percent by weight of the liquid explosive or a gelatin dynamite loses more than 10 percent by weight of the liquid...

New Moves—Preventing Weight-Related Problems in Adolescent Girls

PubMed Central

Neumark-Sztainer, Dianne R.; Friend, Sarah E.; Flattum, Colleen F.; Hannan, Peter J.; Story, Mary T.; Bauer, Katherine W.; Feldman, Shira B.; Petrich, Christine A.

2010-01-01

Background Weight-related problems are prevalent in adolescent girls. Purpose To evaluate New Moves, a school-based program aimed at preventing weight-related problems in adolescent girls. Design School-based group-randomized controlled design. Setting/participants 356 girls (mean age=15.8± 1.2 years) from six intervention and six control high schools. Over 75% of the girls were racial/ethnic minorities and 46% were overweight or obese. Data were collected in 2007–2009 and analyzed in 2009–2010. Intervention An all-girls physical education class, supplemented with nutrition and self-empowerment components, individual sessions using motivational interviewing, lunch meetings, and parent outreach. Main outcome measures Percent body fat, BMI, physical activity, sedentary activity, dietary intake, eating patterns, unhealthy weight control behaviors, and body/self-image. Results New Moves did not lead to significant changes in the girls’ percent body fat or BMI but improvements were seen for sedentary activity, eating patterns, unhealthy weight control behaviors, and body/self-image. For example, in comparison to control girls, at 9-month follow-up, intervention girls decreased their sedentary behaviors by approximately one 30-minute block a day (p=.050); girls increased their portion control behaviors (p=.014); the percentage of girls using unhealthy weight control behaviors decreased by 13.7% (p=.021), and improvements were seen in body image (p=.045) and self-worth (p=.031). Additionally, intervention girls reported more support by friends, teachers, and families for healthy eating and physical activity. Conclusions New Moves provides a model for addressing the broad spectrum of weight-related problems among adolescent girls. Further work is needed to enhance the effectiveness of interventions to improve weight status of youth. PMID:20965379

Antiretroviral therapy during pregnancy and the risk of an adverse outcome.

PubMed

Tuomala, Ruth E; Shapiro, David E; Mofenson, Lynne M; Bryson, Yvonne; Culnane, Mary; Hughes, Michael D; O'Sullivan, M J; Scott, Gwendolyn; Stek, Alice M; Wara, Diane; Bulterys, Marc

2002-06-13

Some studies suggest that combination antiretroviral therapy in pregnant women with human immunodeficiency virus type 1 (HIV-1) infection increases the risk of premature birth and other adverse outcomes of pregnancy. We studied pregnant women with HIV-1 infection who were enrolled in seven clinical studies and delivered their infants from 1990 through 1998. The cohort comprised 2123 women who received antiretroviral therapy during pregnancy (monotherapy in 1590, combination therapy without protease inhibitors in 396, and combination therapy with protease inhibitors in 137) and 1143 women who did not receive antiretroviral therapy. After standardization for the CD4+ cell count and use or nonuse of tobacco, alcohol, and illicit drugs, the rate of premature delivery (<37 weeks of gestation) was similar among the women who received antiretroviral therapy and those who did not (16 percent and 17 percent, respectively); the rate of low birth weight (<2500 g) was 16 percent among the infants born to both groups; and the rate of very low birth weight (<1500 g) was 2 percent for the group that received antiretroviral therapy and 1 percent for the group that did not. The rates of low Apgar scores (<7) and stillbirth were also similar or the same in the two groups. After adjustment for multiple risk factors, combination antiretroviral therapy was not associated with an increased risk of premature delivery as compared with monotherapy (odds ratio, 1.08; 95 percent confidence interval, 0.71 to 1.62) or delivery of an infant with low birth weight (odds ratio, 1.03; 95 percent confidence interval, 0.64 to 1.63). Seven of the women who received combination therapy with protease inhibitors (5 percent) had infants with very low birth weight, as compared with nine women who received combination therapy without protease inhibitors (2 percent) (adjusted odds ratio, 3.56; 95 percent confidence interval, 1.04 to 12.19). As compared with no antiretroviral therapy or monotherapy, combination therapy for HIV-1 infection in pregnant women is not associated with increased rates of premature delivery or with low birth weight, low Apgar scores, or stillbirth in their infants. The association between combination therapy with protease inhibitors and an increased risk of very low birth weight requires confirmation.

Study of cabin noise control for twin engine general aviation aircraft

NASA Astrophysics Data System (ADS)

Vaicaitis, R.; Slazak, M.

1982-02-01

An analytical model based on modal analysis was developed to predict the noise transmission into a twin-engine light aircraft. The model was applied to optimize the interior noise to an A-weighted level of 85 dBA. To achieve the required noise attenuation, add-on treatments in the form of honeycomb panels, damping tapes, acoustic blankets, septum barriers and limp trim panels were added to the existing structure. The added weight of the noise control treatment is about 1.1 percent of the total gross take-off weight of the aircraft.

Cabin Noise Control for Twin Engine General Aviation Aircraft

NASA Technical Reports Server (NTRS)

Vaicaitis, R.; Slazak, M.

1982-01-01

An analytical model based on modal analysis was developed to predict the noise transmission into a twin-engine light aircraft. The model was applied to optimize the interior noise to an A-weighted level of 85 dBA. To achieve the required noise attenuation, add-on treatments in the form of honeycomb panels, damping tapes, acoustic blankets, septum barriers and limp trim panels were added to the existing structure. The added weight of the noise control treatment is about 1.1 percent of the total gross take-off weight of the aircraft.

Preliminary design characteristics of a subsonic business jet concept employing laminar flow control

NASA Technical Reports Server (NTRS)

Turriziani, R. V.; Lovell, W. A.; Price, J. E.; Quartero, C. B.; Washburn, G. F.

1978-01-01

Aircraft configurations were developed with laminar flow control (LFC) and without LFC. The LFC configuration had approximately eleven percent less parasite drag and a seven percent increase in the maximum lift-to drag ratio. Although these aerodynamic advantages were partially offset by the additional weight of the LFC system, the LFC aircraft burned from six to eight percent less fuel for comparable missions. For the trans-atlantic design mission with the gross weight fixed, the LFC configuration would carry a greater payload for ten percent fuel per passenger mile.

Effect of moisture loss on red oak sawlog weight

Treesearch

Edward L. Adams

1971-01-01

A study was made to determine the effect of moisture loss on the weights of red oak sawlogs. The logs, ranging from 9 to 21 inches in scaling diameter and from 8 to 14 feet in length, were dried for a 12-week period. The 21-log sample lost 7.6 percent of the total green sawlog weight. The weight loss for individual logs ranged from 5.3 to 14.5 percent. In general, as...

Carbonate fuel cell anodes

DOEpatents

Donado, R.A.; Hrdina, K.E.; Remick, R.J.

1993-04-27

A molten alkali metal carbonates fuel cell porous anode of lithium ferrite and a metal or metal alloy of nickel, cobalt, nickel/iron, cobalt/iron, nickel/iron/aluminum, cobalt/iron/aluminum and mixtures thereof wherein the total iron content including ferrite and iron of the composite is about 25 to about 80 percent, based upon the total anode, provided aluminum when present is less than about 5 weight percent of the anode. A process is described for production of the lithium ferrite containing anode by slipcasting.

Carbonate fuel cell anodes

DOEpatents

Donado, Rafael A.; Hrdina, Kenneth E.; Remick, Robert J.

1993-01-01

A molten alkali metal carbonates fuel cell porous anode of lithium ferrite and a metal or metal alloy of nickel, cobalt, nickel/iron, cobalt/iron, nickel/iron/aluminum, cobalt/iron/aluminum and mixtures thereof wherein the total iron content including ferrite and iron of the composite is about 25 to about 80 percent, based upon the total anode, provided aluminum when present is less than about 5 weight percent of the anode. A process for production of the lithium ferrite containing anode by slipcasting.

40 CFR Table 3 to Subpart Dddd of... - Work Practice Requirements

Code of Federal Regulations, 2013 CFR

2013-07-01

... with a 24-hour block average inlet moisture content of less than or equal to 30 percent (by weight, dry... average inlet moisture content of the veneer is less than or equal to 25 percent (by weight, dry basis...

21 CFR 177.1520 - Olefin polymers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: POLYMERS Substances for Use as Basic Components... (expressed as percent by weight of the polymer) in N-hexane at specified temperatures Maximum soluble fraction (expressed as percent by weight of polymer) in xylene at specified temperatures 1.1a...

21 CFR 177.1520 - Olefin polymers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD ADDITIVES: POLYMERS Substances for Use as Basic Components... (expressed as percent by weight of the polymer) in N-hexane at specified temperatures Maximum soluble fraction (expressed as percent by weight of polymer) in xylene at specified temperatures 1.1a...

Lunar Return Reentry Thermal Analysis of a Generic Crew Exploration Vehicle Wall Structures

NASA Technical Reports Server (NTRS)

Ko, William L.; Tran, Van T.; Bowles, Jeff

2007-01-01

Thermostructural analysis was performed on generic crew exploration vehicle (GCEV) heat shielded wall structures subjected to reentry heating rates based on five potential lunar return reentry trajectories. The GCEV windward outer wall is fabricated with a graphite/epoxy composite honeycomb sandwich panel and the inner wall with an aluminum honeycomb sandwich panel. The outer wall is protected with an ablative Avcoat-5026-39H/CG thermal protection system (TPS). A virtual ablation method (a graphical approximation) developed earlier was further extended, and was used to estimate the ablation periods, ablation heat loads, and the TPS recession layer depths. It was found that up to 83 95 percent of the total reentry heat load was dissipated in the TPS ablation process, leaving a small amount (3-15 percent) of the remaining total reentry heat load to heat the virgin TPS and maintain the TPS surface at the ablation temperature, 1,200 F. The GCEV stagnation point TPS recession layer depths were estimated to be in the range of 0.280-0.910 in, and the allowable minimum stagnation point TPS thicknesses that could maintain the substructural composite sandwich wall at the limit temperature of 300 F were found to be in the range of 0.767-1.538 in. Based on results from the present analyses, the lunar return abort ballistic reentry was found to be quite attractive because it required less TPS weight than the lunar return direct, the lunar return skipping, or the low Earth orbit guided reentry, and only 11.6 percent more TPS weight than the low Earth orbit ballistic reentry that will encounter a considerable weight penalty to obtain the Earth orbit. The analysis also showed that the TPS weight required for the lunar return skipping reentry was much more than the TPS weight necessary for any of the other reentry trajectories considered.

Performance of transonic fan stage with weight flow per unit annulus area of 198 kilograms per second per square meter (40.6(lb/sec)/sq ft)

NASA Technical Reports Server (NTRS)

Kovich, G.; Moore, R. D.; Urasek, D. C.

1973-01-01

The overall and blade-element performance are presented for an air compressor stage designed to study the effect of weight flow per unit annulus area on efficiency and flow range. At the design speed of 424.8 m/sec the peak efficiency of 0.81 occurred at the design weight flow and a total pressure ratio of 1.56. Design pressure ratio and weight flow were 1.57 and 29.5 kg/sec (65.0 lb/sec), respectively. Stall margin at design speed was 19 percent based on the weight flow and pressure ratio at peak efficiency and at stall.

Preliminary Investigation of Performance and Starting Characteristics of Liquid Fluorine : Liquid Oxygen Mixtures with Jet Fuel

NASA Technical Reports Server (NTRS)

Rothenberg, Edward A; Ordin, Paul M

1954-01-01

The performance of jet fuel with an oxidant mixture containing 70 percent liquid fluorine and 30 percent liquid oxygen by weight was investigated in a 500-pound-thrust engine operating at a chamber pressure of 300 pounds per square inch absolute. A one-oxidant-on-one-fuel skewed-hole impinging-jet injector was evaluated in a chamber of characteristic length equal to 50 inches. A maximum experimental specific impulse of 268 pound-seconds per pound was obtained at 25 percent fuel, which corresponds to 96 percent of the maximum theoretical specific impulse based on frozen composition expansion. The maximum characteristic velocity obtained was 6050 feet per second at 23 percent fuel, or 94 percent of the theoretical maximum. The average thrust coefficient was 1.38 for the 500-pound thrust combustion-chamber nozzle used, which was 99 percent of the theoretical (frozen) maximum. Mixtures of fluorine and oxygen were found to be self-igniting with jet fuel with fluorine concentrations as low as 4 percent, when low starting propellant flow rated were used.

Measuring weight outcomes for obesity intervention strategies: the case of a sugar-sweetened beverage tax.

PubMed

Lin, Biing-Hwan; Smith, Travis A; Lee, Jonq-Ying; Hall, Kevin D

2011-12-01

Taxing unhealthy foods has been proposed as a means to improve diet and health by reducing calorie intake and raising funds to combat obesity, particularly sugar-sweetened beverages (SSBs). A growing number of studies have examined the effects of such food taxes, but few have estimated the weight-loss effects. Typically, a static model of 3500 calories for one pound of body weight is used, and the main objective of the study is to demonstrate its bias. To accomplish the objective, we estimate income-segmented beverage demand systems to examine the potential effects of a SSB tax. Elasticity estimates and a hypothetical 20 percent effective tax rate (or about 0.5 cent per ounce) are applied to beverage intake data from a nationally representative survey, and we find an average daily reduction of 34-47 calories among adults and 40-51 calories among children. The tax-induced energy reductions are translated into weight loss using both static and dynamic calorie-to-weight models. Results demonstrate that the static model significantly overestimates the weight loss from reduced energy intake by 63 percent in year one, 346 percent in year five, and 764 percent in year 10, which leads to unrealistic expectations for obesity intervention strategies. The tax is estimated to generate $5.8 billion a year in revenue and is found to be regressive, although it represents about 1 percent of household food and beverage spending. Published by Elsevier B.V.

A Preliminary Study of the Preparation of Slurry Fuels from Vaporized Magnesium

NASA Technical Reports Server (NTRS)

Witzke, Walter R; Prok, George M; Walsh, Thomas J

1954-01-01

Slurry fuels containing extremely small particles of magnesium were prepared by concentrating the dilute slurry product resulting from the shock-cooling of magnesium metal vapors with a liquid hydrocarbon spray. A complete description of the equipment and procedure used in preparing the fuel is given. Ninety-five percent by weight of the solid particles formed by this process passed through a 100-mesh screen. The particle-size distribution of the screened fraction of one run, as determined by sedimentation analysis, indicated that 73 percent by weight of the metal particles were finer than 2 microns in equivalent spherical diameter. The purity of the solid particles ranged as high as 98.9 percent by weight of free magnesium. The screened product was concentrated by means of a bowl-type centrifuge from 0.5 to more than 50 percent by weight solids content to form an extremely viscous, clay-like mass. By addition of a surface active agent, this viscous material was converted into a pumpable slurry fuel.

Effects of laminar flow control on the performance of a large span-distributed-load flying-wing cargo airplane concept

NASA Technical Reports Server (NTRS)

Jernell, L. S.

1978-01-01

The effects of laminar flow control (LFC) on the performance of a large span-distributed-load flying-wing cargo airplane concept having a design payload of 2.669 MN and range of 5.93 Mm were determined. Two configurations were considered. One employed laminarized flow over the entire surfaces of the wing and vertical tails, with the exception of the estimated areas of interference due to the fuselage and engines. The other case differed only in that laminar flow was not applied to the flaps, elevons, spoilers, or rudders. The two cases are referred to as the 100 percent and 80 percent laminar configurations, respectively. The utilization of laminar flow control results in reductions in the standard day, sea level installed maximum static thrust per engine from 240 kN for the non-LFC configuration to 205 kN for the 100 percent laminar configuration and 209 kN for the 80 percent case. Weight increases due to the LFC systems cause increases in the operating empty weights of approximately 3 to 4 percent. The design takeoff gross weights decrease approximately 3 to 5 percent. The FAR-25 takeoff field distances for the LFC configurations are greater by about 6 to 7 percent. Fuel efficiencies for the respective configurations are increased 33 percent and 23 percent.

Teammates and social influence affect weight loss outcomes in a team-based weight loss competition

PubMed Central

Leahey, Tricia M.; Kumar, Rajiv; Weinberg, Brad M.; Wing, Rena R.

2013-01-01

Team-based Internet interventions are increasing in popularity as a way of promoting weight loss in large numbers of individuals. Given that social networks influence health behavior change, this study investigated the effects of teammates and social influence on individual weight loss during a team-based weight loss competition. Shape Up Rhode Island 2009 was a 12-week online program open to adult residents of Rhode Island. Participants joined with a team and competed with other teams on weight loss and/or physical activity. OW/OB individuals (N=3,330; 76%female; age=46.1±10.8; BMI=31.2±5.3kg/m2), representing 987 teams, completed the weight loss program. Multilevel modeling was used to examine whether weight loss clustered among teammates and whether percentage of teammates in the weight loss division and reported teammate influence on weight loss were associated with individual weight outcomes. OW/OB completers reported losing 4.2±3.4% of initial body weight. Weight loss was similar among teammates (ICC=.10, p<.001). Moreover, having a greater percentage of teammates in the weight loss division and reporting higher social influence for weight loss were associated with greater percent weight loss (p’s≤.002). Similarly, achieving a clinically significant (5%) weight loss tended to cluster within teams (ICC=0.09;p<.001) and having more teammates in the weight loss division and higher social influence for weight loss were associated with increased likelihood of achieving a 5% weight loss (OR=1.06; OR=1.20, respectively). These results suggest that teammates affect weight loss outcomes during a team-based intervention. Harnessing and maximizing teammate influence for weight loss may enhance weight losses in large-scale team-based weight loss programs. PMID:22310234

Regional Regression Equations to Estimate Flow-Duration Statistics at Ungaged Stream Sites in Connecticut

USGS Publications Warehouse

Ahearn, Elizabeth A.

2010-01-01

Multiple linear regression equations for determining flow-duration statistics were developed to estimate select flow exceedances ranging from 25- to 99-percent for six 'bioperiods'-Salmonid Spawning (November), Overwinter (December-February), Habitat Forming (March-April), Clupeid Spawning (May), Resident Spawning (June), and Rearing and Growth (July-October)-in Connecticut. Regression equations also were developed to estimate the 25- and 99-percent flow exceedances without reference to a bioperiod. In total, 32 equations were developed. The predictive equations were based on regression analyses relating flow statistics from streamgages to GIS-determined basin and climatic characteristics for the drainage areas of those streamgages. Thirty-nine streamgages (and an additional 6 short-term streamgages and 28 partial-record sites for the non-bioperiod 99-percent exceedance) in Connecticut and adjacent areas of neighboring States were used in the regression analysis. Weighted least squares regression analysis was used to determine the predictive equations; weights were assigned based on record length. The basin characteristics-drainage area, percentage of area with coarse-grained stratified deposits, percentage of area with wetlands, mean monthly precipitation (November), mean seasonal precipitation (December, January, and February), and mean basin elevation-are used as explanatory variables in the equations. Standard errors of estimate of the 32 equations ranged from 10.7 to 156 percent with medians of 19.2 and 55.4 percent to predict the 25- and 99-percent exceedances, respectively. Regression equations to estimate high and median flows (25- to 75-percent exceedances) are better predictors (smaller variability of the residual values around the regression line) than the equations to estimate low flows (less than 75-percent exceedance). The Habitat Forming (March-April) bioperiod had the smallest standard errors of estimate, ranging from 10.7 to 20.9 percent. In contrast, the Rearing and Growth (July-October) bioperiod had the largest standard errors, ranging from 30.9 to 156 percent. The adjusted coefficient of determination of the equations ranged from 77.5 to 99.4 percent with medians of 98.5 and 90.6 percent to predict the 25- and 99-percent exceedances, respectively. Descriptive information on the streamgages used in the regression, measured basin and climatic characteristics, and estimated flow-duration statistics are provided in this report. Flow-duration statistics and the 32 regression equations for estimating flow-duration statistics in Connecticut are stored on the U.S. Geological Survey World Wide Web application ?StreamStats? (http://water.usgs.gov/osw/streamstats/index.html). The regression equations developed in this report can be used to produce unbiased estimates of select flow exceedances statewide.

Synthesis and analysis of jet fuels from shale oil and coal syncrudes

NASA Technical Reports Server (NTRS)

Antoine, A. C.; Gallagher, J. P.

1976-01-01

The technical problems involved in converting a significant portion of a barrel of either a shale oil or coal syncrude into a suitable aviation turbine fuel were studied. TOSCO shale oil, H-Coal and COED coal syncrudes were the starting materials. They were processed by distillation and hydrocracking to produce two levels of yield (20 and 40 weight percent) of material having a distillation range of approximately 422 to 561 K (300 F to 550 F). The full distillation range 311 to 616 K (100 F to 650 F) materials were hydrotreated to meet two sets of specifications (20 and 40 volume percent aromatics, 13.5 and 12.75 weight percent H, 0.2 and 0.5 weight percent S, and 0.1 and 0.2 weight percent N). The hydrotreated materials were distilled to meet given end point and volatility requirements. The syntheses were carried out in laboratory and pilot plant equipment scaled to produce thirty-two 0.0757 cu m (2-gal)samples of jet fuel of varying defined specifications. Detailed analyses for physical and chemical properties were made on the crude starting materials and on the products.

Examining behavioral processes through which lifestyle interventions promote weight loss: results from PREMIER.

PubMed

Fitzpatrick, Stephanie L; Bandeen-Roche, Karen; Stevens, Victor J; Coughlin, Janelle W; Rubin, Richard R; Brantley, Phillip J; Funk, Kristine L; Svetkey, Laura P; Jerome, Gerald J; Dalcin, Arlene; Charleston, Jeanne; Appel, Lawrence J

2014-04-01

To examine the behavioral processes through which lifestyle interventions impacted weight loss. The analyses were limited to overweight and obese Black and White adults randomized to a PREMIER lifestyle intervention (N = 501). Structural equation modeling was conducted to test the direct and indirect relationships of session attendance, days of self-monitoring diet and exercise, change in diet composition and exercise, and 6-month weight change. Greater session attendance was associated with increased self-monitoring, which was in turn significantly related to reduction in percent energy from total fat consumed. Change in percent energy from fat and self-monitoring was associated with 6-month percent change in weight. Both a decrease in fat intake and increase in self-monitoring are potential mediators of the relationship between attendance and weight change. The findings provide a reasonable model that suggests regular session attendance and use of behavioral strategies like self-monitoring are associated with improved behavioral outcomes that are associated with weight loss. Copyright © 2013 The Obesity Society.

Evaluation of the Multi-Chambered Treatment Train, a retrofit water-quality management device

USGS Publications Warehouse

Corsi, Steven R.; Greb, Steven R.; Bannerman, Roger T.; Pitt, Robert E.

1999-01-01

This paper presents the results of an evaluation of the benefits and efficiencies of a device called the Multi-Chambered Treatment Train (MCTT), which was installed below the pavement surface at a municipal maintenance garage and parking facility in Milwaukee, Wisconsin. Flow-weighted water samples were collected at the inlet and outlet of the device during 15 storms, and the efficiency of the device was based on reductions in the loads of 68 chemical constituents and organic compounds. High reduction efficiencies were achieved for all particulate-associated constituents, including total suspended solids (98 percent), total phosphorus (88 percent), and total recoverable zinc (91 percent). Reduction rates for dissolved fractions of the constituents were substantial, but somewhat lower (dissolved solids, 13 percent; dissolved phosphorus, 78 percent; dissolved zinc, 68 percent). The total dissolved solids load, which originated from road salt storage, was more than four times the total suspended solids load. No appreciable difference was detected between particle-size distributions in inflow and outflow samples.

Comparison of all-electric secondary power systems for civil transport

NASA Technical Reports Server (NTRS)

Renz, David D.

1992-01-01

Three separate studies have shown operational, weight, and cost advantages for commercial subsonic transport aircraft using an all-electric secondary power system. The first study in 1982 showed that all-electric secondary power systems produced the second largest benefit compared to four other technology upgrades. The second study in 1985 showed a 10 percent weight and fuel savings using an all-electric high frequency (20 kHz) secondary power system. The last study in 1991 showed a 2 percent weight savings using today's technology (400 Hz) in an all-electric secondary power system. This paper will compare the 20 kHz and 400 Hz studies, analyze the 2 to 10 percent difference in weight savings and comment on the common benefits of the all-electric secondary power system.

Comparison of all-electric secondary power systems for civil subsonic transports

NASA Technical Reports Server (NTRS)

Renz, David D.

1992-01-01

Three separate studies have shown operational, weight, and cost advantages for commercial subsonic transport aircraft using an all-electric secondary power system. The first study in 1982 showed that all-electric secondary power systems produced the second largest benefit compared to four other technology upgrades. The second study in 1985 showed a 10 percent weight and fuel savings using an all-electric high frequency (20 kHz) secondary power system. The last study in 1991 showed a 2 percent weight savings using today's technology (400 Hz) in an all-electric secondary power system. This paper will compare the 20 kHz and 400 Hz studies, analyze the 2 to 10 percent difference in weight savings and comment on the common benefits of the all-electric secondary power system.

A Streamflow Statistics (StreamStats) Web Application for Ohio

USGS Publications Warehouse

Koltun, G.F.; Kula, Stephanie P.; Puskas, Barry M.

2006-01-01

A StreamStats Web application was developed for Ohio that implements equations for estimating a variety of streamflow statistics including the 2-, 5-, 10-, 25-, 50-, 100-, and 500-year peak streamflows, mean annual streamflow, mean monthly streamflows, harmonic mean streamflow, and 25th-, 50th-, and 75th-percentile streamflows. StreamStats is a Web-based geographic information system application designed to facilitate the estimation of streamflow statistics at ungaged locations on streams. StreamStats can also serve precomputed streamflow statistics determined from streamflow-gaging station data. The basic structure, use, and limitations of StreamStats are described in this report. To facilitate the level of automation required for Ohio's StreamStats application, the technique used by Koltun (2003)1 for computing main-channel slope was replaced with a new computationally robust technique. The new channel-slope characteristic, referred to as SL10-85, differed from the National Hydrography Data based channel slope values (SL) reported by Koltun (2003)1 by an average of -28.3 percent, with the median change being -13.2 percent. In spite of the differences, the two slope measures are strongly correlated. The change in channel slope values resulting from the change in computational method necessitated revision of the full-model equations for flood-peak discharges originally presented by Koltun (2003)1. Average standard errors of prediction for the revised full-model equations presented in this report increased by a small amount over those reported by Koltun (2003)1, with increases ranging from 0.7 to 0.9 percent. Mean percentage changes in the revised regression and weighted flood-frequency estimates relative to regression and weighted estimates reported by Koltun (2003)1 were small, ranging from -0.72 to -0.25 percent and -0.22 to 0.07 percent, respectively.

Demographic patterns of postfire regeneration in mediterranean-climate shrublands of California

USGS Publications Warehouse

Keeley, J.E.; Fotheringham, C.J.; Baer-Keeley, M.

2006-01-01

Eggs of captive black ducks fed diets containing DDE at 10 and 30 ppm (dry weight) experienced significant shell thinning and an increase in shell cracking when compared to eggs of untreated black ducks. Eggshells from dosed ducks were: 18-24 percent thinner at the equator than shells from undosed ducks; 28-31 percent thinner at the cap; and 29-38 percent thinner at the apex. Shell cracking averaged 21 percent among eggs fram the 30 ppm DDE dosage and 10 percent among eggs from the 10 ppm dosage. Only 2 percent of the eggs from untreated black ducks were cracked. Survival of ducklings fram dosed parents in terms of 'percentage of 21-day ducklings of embryonated eggs' was 40-76 percent lower than survival of ducklings from undosed parents. Average DDE residues (wet weight) in eggs from hens fed 10 and 30 ppm DDE were 46 ppm and 144 ppm, respectively.

21 CFR 178.3505 - Glyceryl tri-(12-acetoxy-stearate).

Code of Federal Regulations, 2010 CFR

2010-04-01

... for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting... surface of calcium carbonate at a level not to exceed 1 weight-percent of the total mixture. (b) The... with nonfatty foods at a level not to exceed 20 weight-percent of the polymer. [50 FR 1503, Jan. 11...

40 CFR 63.1362 - Standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... source subject to the provisions of this subpart shall control HAP emissions to the levels specified in... control device, installed on or before November 10, 1997 on a process vent otherwise subject to the... greater than or equal to 90 percent by weight but less than 98 percent by weight, then the control device...

40 CFR 63.1362 - Standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... source subject to the provisions of this subpart shall control HAP emissions to the levels specified in... control device, installed on or before November 10, 1997 on a process vent otherwise subject to the... greater than or equal to 90 percent by weight but less than 98 percent by weight, then the control device...

40 CFR 98.68 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

.../metric tons Al) Individual facility records. Sa: sulfur content in baked anode (percent weight) 2.0. Asha: ash content in baked anode (percent weight) 0.4. CO2 Emissions from Sderberg Cells (VSS and HSS) MP... content in green anodes (metric tons) 0.005 × GA. BA: annual baked anode production (metric tons...

40 CFR 52.1670 - Identification of plans.

Code of Federal Regulations, 2011 CFR

2011-07-01

... percent, by weight, for the Long Island Lighting Co.'s Northport Generating Facility (Units 1, 2, and 3... oil limitation to 1.0 percent, by weight, for the Long Island Lighting Company's Glenwood Generating... of New York, Inc. Arthur Kill generating facility, units 2 and 3, Staten Island, New York and...

The effects of Cr, Co, Al, Mo and Ta on the cyclic oxidation behavior of a prototype cast Ni-base superalloy based on a 2(5) composite statistically designed experiment

NASA Technical Reports Server (NTRS)

Barrett, C. A.

1984-01-01

A series of cast Ni-base superalloys were systematically varied at selected levels of Co, Cr, Mo, Ta, and Al. The elemental levels varied were Mo, 0 to 4 percent; Cr, 6 to 18 percent; Co, 0 to 20 percent, Ta, 0 to 8 percent; and Al, 3.25 to 6.25 percent. The cyclic oxidation resistance was determined from specific weight change data as a function of time for 1 hr cycles in static air at 1100 C. The significant terms in decreasing order of their importance were Al, Ta, Cr2, Al-Cr, Cr-Co, Co2, Al-Mo, Cr-Mo, Al-Al, and Mo-Ta. The Al term alone accounted for close to 82 percent of the explained variability. The estimating equation showed that the Al level was the most important and should be at its 6.25 wt % maximum value. The Mo and Ta levels should also be at their maximum 4 and 8 wt % respectively. The cobalt composition should be as low as possible, i.e., 0 wt%. The Cr level optimum varies depending on the other 4 levels. The X-ray diffaction results indicate the most protective scales are alumina/aluminate spinel stabilizized with a tri-rutile oxide high in Ta and Mo.

Segmentation of overweight Americans and opportunities for social marketing

PubMed Central

Kolodinsky, Jane; Reynolds, Travis

2009-01-01

Background The food industry uses market segmentation to target products toward specific groups of consumers with similar attitudinal, demographic, or lifestyle characteristics. Our aims were to identify distinguishable segments within the US overweight population to be targeted with messages and media aimed at moving Americans toward more healthy weights. Methods Cluster analysis was used to identify segments of consumers based on both food and lifestyle behaviors related to unhealthy weights. Drawing from Social Learning Theory, the Health Belief Model, and existing market segmentation literature, the study identified five distinct, recognizable market segments based on knowledge and behavioral and environmental factors. Implications for social marketing campaigns designed to move Americans toward more healthy weights were explored. Results The five clusters identified were: Highest Risk (19%); At Risk (22%); Right Behavior/Wrong Results (33%); Getting Best Results (13%); and Doing OK (12%). Ninety-nine percent of those in the Highest Risk cluster were overweight; members watched the most television and exercised the least. Fifty-five percent of those in the At Risk cluster were overweight; members logged the most computer time and almost half rarely or never read food labels. Sixty-six percent of those in the Right Behavior/Wrong Results cluster were overweight; however, 95% of them were familiar with the food pyramid. Members reported eating a low percentage of fast food meals (8%) compared to other groups but a higher percentage of other restaurant meals (15%). Less than six percent of those in the Getting Best Results cluster were overweight; every member read food labels and 75% of members' meals were "made from scratch." Eighteen percent of those in the Doing OK cluster were overweight; members watched the least television and reported eating 78% of their meals "made from scratch." Conclusion This study demonstrated that five distinct market segments can be identified for social marketing efforts aimed at addressing the obesity epidemic. Through the identification of these five segments, social marketing campaigns can utilize selected channels and messages that communicate the most relevant and important information. The results of this study offer insight into how segmentation strategies and social marketing messages may improve public health. PMID:19267936

Segmentation of overweight Americans and opportunities for social marketing.

PubMed

Kolodinsky, Jane; Reynolds, Travis

2009-03-08

The food industry uses market segmentation to target products toward specific groups of consumers with similar attitudinal, demographic, or lifestyle characteristics. Our aims were to identify distinguishable segments within the US overweight population to be targeted with messages and media aimed at moving Americans toward more healthy weights. Cluster analysis was used to identify segments of consumers based on both food and lifestyle behaviors related to unhealthy weights. Drawing from Social Learning Theory, the Health Belief Model, and existing market segmentation literature, the study identified five distinct, recognizable market segments based on knowledge and behavioral and environmental factors. Implications for social marketing campaigns designed to move Americans toward more healthy weights were explored. The five clusters identified were: Highest Risk (19%); At Risk (22%); Right Behavior/Wrong Results (33%); Getting Best Results (13%); and Doing OK (12%). Ninety-nine percent of those in the Highest Risk cluster were overweight; members watched the most television and exercised the least. Fifty-five percent of those in the At Risk cluster were overweight; members logged the most computer time and almost half rarely or never read food labels. Sixty-six percent of those in the Right Behavior/Wrong Results cluster were overweight; however, 95% of them were familiar with the food pyramid. Members reported eating a low percentage of fast food meals (8%) compared to other groups but a higher percentage of other restaurant meals (15%). Less than six percent of those in the Getting Best Results cluster were overweight; every member read food labels and 75% of members' meals were "made from scratch." Eighteen percent of those in the Doing OK cluster were overweight; members watched the least television and reported eating 78% of their meals "made from scratch." This study demonstrated that five distinct market segments can be identified for social marketing efforts aimed at addressing the obesity epidemic. Through the identification of these five segments, social marketing campaigns can utilize selected channels and messages that communicate the most relevant and important information. The results of this study offer insight into how segmentation strategies and social marketing messages may improve public health.

Projections of forest contributions to global carbon cycles

Treesearch

Michael E. Goerndt; Stephen R. Shifley; Patrick D. Miles; Dave Wear; Francisco X. Aguilar

2016-01-01

Forests cover 42 percent of the Northern United States, and collectively they store 13 billion tons of carbon in live trees (29 percent), roots (6 percent), forest floor (9 percent), dead trees (6 percent), and soils (50 percent). About half the biomass of a live tree (dry weight basis) is sequestered carbon (Woodall et al. 2011) - not the largest but the most dynamic...

7 CFR 2902.47 - Gear lubricants.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Regulations of the Department of Agriculture (Continued) OFFICE OF ENERGY POLICY AND NEW USES, DEPARTMENT OF... based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of... requesting that manufacturers of these qualifying biobased products provide information for the BioPreferred...

7 CFR 2902.47 - Gear lubricants.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Regulations of the Department of Agriculture (Continued) OFFICE OF ENERGY POLICY AND NEW USES, DEPARTMENT OF... based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of... requesting that manufacturers of these qualifying biobased products provide information for the BioPreferred...

7 CFR 2902.38 - Firearm lubricants.

Code of Federal Regulations, 2010 CFR

2010-01-01

... based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. (c) Preference compliance date. No later than May 14... require the use of biobased firearm lubricants. [73 FR 27994, May 14, 2008] ...

Weight savings in aerospace vehicles through propellant scavenging

NASA Technical Reports Server (NTRS)

Schneider, Steven J.; Reed, Brian D.

1988-01-01

Vehicle payload benefits of scavenging hydrogen and oxygen propellants are addressed. The approach used is to select a vehicle and a mission and then select a scavenging system for detailed weight analysis. The Shuttle 2 vehicle on a Space Station rendezvous mission was chosen for study. The propellant scavenging system scavenges liquid hydrogen and liquid oxygen from the launch propulsion tankage during orbital maneuvers and stores them in well insulated liquid accumulators for use in a cryogenic auxiliary propulsion system. The fraction of auxiliary propulsion propellant which may be scavenged for propulsive purposes is estimated to be 45.1 percent. The auxiliary propulsion subsystem dry mass, including the proposed scavenging system, an additional 20 percent for secondary structure, an additional 5 percent for electrical service, a 10 percent weight growth margin, and 15.4 percent propellant reserves and residuals is estimated to be 6331 kg. This study shows that the fraction of the on-orbit vehicle mass required by the auxiliary propulsion system of this Shuttle 2 vehicle using this technology is estimated to be 12.0 percent compared to 19.9 percent for a vehicle with an earth-storable bipropellant system. This results in a vehicle with the capability of delivering an additional 7820 kg to the Space Station.

Medicaid prospective payment: Case-mix increase

PubMed Central

Baker, Samuel L.; Kronenfeld, Jennie J.

1990-01-01

South Carolina Medicaid implemented prospective payment by diagnosis-related group (DRG) for inpatient care. The rate of complications among newborns and deliveries doubled immediately. The case-mix index for newborns increased 66.6 percent, which increased the total Medicaid hospital expenditure 5.5 percent. Outlier payments increased total expenditure further. DRG distribution change among newborns has a large impact on spending because newborn complication DRGs have high weights. States adopting a DRG-based payment system for Medicaid should anticipate a greater increase in case mix than Medicare experienced. PMID:10113463

Heterogeneous Compression of Large Collections of Evolutionary Trees.

PubMed

Matthews, Suzanne J

2015-01-01

Compressing heterogeneous collections of trees is an open problem in computational phylogenetics. In a heterogeneous tree collection, each tree can contain a unique set of taxa. An ideal compression method would allow for the efficient archival of large tree collections and enable scientists to identify common evolutionary relationships over disparate analyses. In this paper, we extend TreeZip to compress heterogeneous collections of trees. TreeZip is the most efficient algorithm for compressing homogeneous tree collections. To the best of our knowledge, no other domain-based compression algorithm exists for large heterogeneous tree collections or enable their rapid analysis. Our experimental results indicate that TreeZip averages 89.03 percent (72.69 percent) space savings on unweighted (weighted) collections of trees when the level of heterogeneity in a collection is moderate. The organization of the TRZ file allows for efficient computations over heterogeneous data. For example, consensus trees can be computed in mere seconds. Lastly, combining the TreeZip compressed (TRZ) file with general-purpose compression yields average space savings of 97.34 percent (81.43 percent) on unweighted (weighted) collections of trees. Our results lead us to believe that TreeZip will prove invaluable in the efficient archival of tree collections, and enables scientists to develop novel methods for relating heterogeneous collections of trees.

Chemical Laser Solid Fuels Program

DTIC Science & Technology

1976-12-01

liquids. Solid propellant gas generators which can supply all of the ^(Tl-*fs DD , FORM w73 JAN 71 I"* EDITION OF 1 NOV SS IS OBSOLETE...seven tests, the mean weight yield was 13.24 ± 0.09 percent which is 97.72 percent of the theoretical weight yield of 13. SS percent for this...early in the test and peaks as the deuteriun flow rate is dropping at the burnout of the grain. The pressure differential across the filter discs

Aviation Turbine Fuels from Tar Sands Bitumen and Heavy Oils. Part 2. Laboratory Sample Production.

DTIC Science & Technology

1987-07-01

tar sand bitumen from West Central Kentucky; and Sunnyside tar sand bitumen from the Uinta Basin , Utah. Each of the feedstocks had unique...fuel and about 50 volume percent heavy gas oil (600-1000°F). The Westken bitumen was overall the heaviest of the four feedstocks evaluated. K factors...was 40 weight percent and about 20 weight percent in the total crude. 3. San Ardo Heavy oil The San Ardo field is located in the Coastal basin of the

Effects of spaceflight on the spermatogonial population of rat seminiferous epithelium

NASA Technical Reports Server (NTRS)

Sapp, Walter J.; Philpott, Delbert E.; Williams, Carol S.; Kato, Katharine; Stevenson, Joann; Vasquez, M.; Serova, L. V.

1990-01-01

Testes from rats flown on Cosmos 1887 were compared with vivarium control and synchronous control samples. The mean weights of flight testes, normalized for weight per 100 g, were 6.4 percent less when compared with the vivarium controls. Counts of spermatogonia from tissue sections (seminiferous tubules in maturation stage 6) from five animals in each group revealed 4 percent fewer spermatogonia in flight testes compared with synchronous controls and 11 percent fewer spermatogonia in flight samples compared with vivarium controls.

Nickel base alloy. [for gas turbine engine stator vanes

NASA Technical Reports Server (NTRS)

Freche, J. C.; Waters, W. J. (Inventor)

1977-01-01

A nickel base superalloy for use at temperatures of 2000 F (1095 C) to 2200 F (1205 C) was developed for use as stator vane material in advanced gas turbine engines. The alloy has a nominal composition in weight percent of 16 tungsten, 7 aluminum, 1 molybdenum, 2 columbium, 0.3 zirconium, 0.2 carbon and the balance nickel.

Weight outcomes audit for 34,271 adults referred to a primary care/commercial weight management partnership scheme.

PubMed

Stubbs, R James; Pallister, Carolyn; Whybrow, Stephen; Avery, Amanda; Lavin, Jacquie

2011-01-01

This project audited rate and extent of weight loss in a primary care/commercial weight management organisation partnership scheme. 34,271 patients were referred to Slimming World for 12 weekly sessions. Data were analysed using individual weekly weight records. Average (SD) BMI change was -1.5 kg/m² (1.3), weight change -4.0 kg (3.7), percent weight change -4.0% (3.6), rate of weight change -0.3 kg/week, and number of sessions attended 8.9 (3.6) of 12. For patients attending at least 10 of 12 sessions (n = 19,907 or 58.1%), average (SD) BMI change was -2.0 kg/m² (1.3), weight change -5.5 kg (3.8), percent weight change -5.5% (3.5), rate of weight change -0.4 kg/week, and average number of sessions attended was 11.5 (0.7) (p < 0.001, compared to all patients). Weight loss was greater in men (n = 3,651) than in women (n = 30,620) (p < 0.001). 35.8% of all patients enrolled and 54.7% in patients attending 10 or more sessions achieved at least 5% weight loss. Weight gain was prevented in 92.1% of all patients referred. Attendance explained 29.6% and percent weight lost in week 1 explained 18.4% of the variance in weight loss. Referral to a commercial organisation is a practical option for National Health Service (NHS) weight management strategies, which achieves clinically safe and effective weight loss. Copyright © 2011 S. Karger AG, Basel.

Mixed solvent electrolytes for ambient temperature secondary lithium cells

NASA Technical Reports Server (NTRS)

Shen, David H. (Inventor); Surampudi, Subbarao (Inventor); Deligiannis, Fotios (Inventor); Halpert, Gerald (Inventor)

1991-01-01

The present invention comprises an improved electrolyte for secondary lithium-based cells as well as batteries fabricated using this electrolyte. The electrolyte is a lithium containing salt dissolved in a non-aqueous solvent, which is made from a mixture of ethylene carbonate, ethylene propylene diene terpolymer, 2-methylfuran, and 2-methyltetrahydrofuran. This improved, mixed solvent electrolyte is more conductive than prior electrolytes and much less corrosive to lithium anodes. Batteries constructed with this improved electrolyte utilize lithium or lithium alloy anodes and cathodes made of metal chalcogenides or oxides, such as TiS.sub.2, NbSe.sub.3, V.sub.6 O.sub.13, V.sub.2 O.sub.5, MoS.sub.2, MoS.sub.3, CoO.sub.2, or CrO.sub.2, dissolved in a supporting polymer matrix, like EPDM. The preferred non-aqueous solvent mixture comprises approximately 5 to 30 volume percent ethylene carbonate, approximately 0.01 to 0.1 weight percent ethylene propylene diene terpolymer, and approximately 0.2 to 2 percent 2-methylfuran, with the balance being 2-methyltetrahydrofuran. The most preferred solvent comprises approximately 10 to 20 volume percent ethylene carbonate, about 0.05 weight percent ethylene propylene diene terpolymer, and about 1.0 percent 2-methylfuran, with the balance being 2-methyltetrahydrofuran. The concentration of lithium arsenic hexafluoride can range from about 1.0 to 1.8 M; a concentration 1.5 M is most preferred. Secondary batteries made with the improved electrolyte of this invention have lower internal impedance, longer cycle life, higher energy density, low self-discharge, and longer shelf life.

77 FR 69381 - Designation of Product Categories for Federal Procurement

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-19

... carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished... fertilizer formulas that will improve the efficiency and the effectiveness of the chemicals, including... qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in...

21 CFR 160.110 - Frozen eggs.

Code of Federal Regulations, 2013 CFR

2013-04-01

... or in a water carrier, but the amount added does not exceed 0.5 percent of the weight of the frozen eggs. If a water carrier is used, it shall contain not less than 50 percent by weight of such... paragraph (b) of this section is used, the label shall bear the statement “Monosodium phosphate (or...

21 CFR 160.110 - Frozen eggs.

Code of Federal Regulations, 2012 CFR

2012-04-01

... or in a water carrier, but the amount added does not exceed 0.5 percent of the weight of the frozen eggs. If a water carrier is used, it shall contain not less than 50 percent by weight of such... paragraph (b) of this section is used, the label shall bear the statement “Monosodium phosphate (or...

21 CFR 160.110 - Frozen eggs.

Code of Federal Regulations, 2014 CFR

2014-04-01

... or in a water carrier, but the amount added does not exceed 0.5 percent of the weight of the frozen eggs. If a water carrier is used, it shall contain not less than 50 percent by weight of such... paragraph (b) of this section is used, the label shall bear the statement “Monosodium phosphate (or...

40 CFR Table 4 to Subpart Ffff of... - Emission Limits for Storage Tanks

Code of Federal Regulations, 2010 CFR

2010-07-01

... HAP emissions by ≥95 percent by weight or to ≤20 ppmv of TOC or organic HAP and ≤20 ppmv of hydrogen... ≥95 percent by weight or to ≤20 ppmv of TOC or organic HAP and ≤20 ppmv of hydrogen halide and halogen...

40 CFR 60.562-1 - Standards: Process emissions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... methane and ethane) (TOC) by 98 weight percent, or to a concentration of 20 parts per million by volume (ppmv) on a dry basis, whichever is less stringent. The TOC is expressed as the sum of the actual... Polypropylene and Polyethylene Affected Facilities Procedure /a/ Applicable TOC weight percent range Control/no...

More About High-Temperature Resistance Strain Gauges

NASA Technical Reports Server (NTRS)

Englund, D. R.; Williams, W. D.; Lei, Jih-Fen; Hulse, C. O.

1994-01-01

Two reports present additional information on electrical-resistance strain gauges described in "High-Temperature Resistance Strain Gauges" (LEW-15379). For protection against oxidation at high temperatures, gauges covered, by flame spraying, with coats of alumina containing up to 1 weight percent of yttria or, perferably, containing 4 to 6 weight percent of zirconia.

7 CFR 52.1845 - Sizes of seedless raisins.

Code of Federal Regulations, 2012 CFR

2012-01-01

... raisins will pass through round perforations 22/64-inch in diameter, but not more than 10 percent, by weight, of all the raisins may pass through round perforations 20/64-inch in diameter. (b) Small or midget size raisins means that 95 percent, by weight, of all the raisins will pass through round...

40 CFR 52.1689 - Original Identification of plan section.

Code of Federal Regulations, 2014 CFR

2014-07-01

... percent, by weight, for the Long Island Lighting Co.'s Northport Generating Facility (Units 1, 2, and 3... oil limitation to 1.0 percent, by weight, for the Long Island Lighting Company's Glenwood Generating... of New York, Inc. Arthur Kill generating facility, units 2 and 3, Staten Island, New York and...

40 CFR 52.1689 - Original Identification of plan section.

Code of Federal Regulations, 2013 CFR

2013-07-01

... percent, by weight, for the Long Island Lighting Co.'s Northport Generating Facility (Units 1, 2, and 3... oil limitation to 1.0 percent, by weight, for the Long Island Lighting Company's Glenwood Generating... of New York, Inc. Arthur Kill generating facility, units 2 and 3, Staten Island, New York and...

40 CFR 52.1689 - Original identification of plan section.

Code of Federal Regulations, 2012 CFR

2012-07-01

... percent, by weight, for the Long Island Lighting Co.'s Northport Generating Facility (Units 1, 2, and 3... oil limitation to 1.0 percent, by weight, for the Long Island Lighting Company's Glenwood Generating... of New York, Inc. Arthur Kill generating facility, units 2 and 3, Staten Island, New York and...

External fuel vaporization study, phase 2

NASA Technical Reports Server (NTRS)

Szetela, E. J.; Chiappetta, L.

1981-01-01

An analytical study was conducted to evaluate the effect of variations in fuel properties on the design of an external fuel vaporizaton system. The fuel properties that were considered included thermal stability, critical temperature, enthalpy a critical conditions, volatility, and viscosity. The design parameters that were evaluated included vaporizer weight and the impact on engine requirement such as maintenance, transient response, performance, and altitude relight. The baseline fuel properties were those of Jet A. The variation in thermal stability was taken as the thermal stability variation for Experimental Referee Broad Specification (ERBS) fuel. The results of the analysis indicate that a change in thermal stability equivalent to that of ERBS would increase the vaporization system weight by 20 percent, decrease oprating time between cleaning by 40 percent and make altitude relight more difficult. An increase in fuel critical temperature of 39 K would require a 40 percent increase in vaporization system weight. The assumed increase in enthalpy and volatility would also increase vaporizer weight by 40 percent and make altitude relight extremely difficult. The variation in fuel viscosity would have a negligible effect on the design parameters.

Mapping variations in weight percent silica measured from multispectral thermal infrared imagery - Examples from the Hiller Mountains, Nevada, USA and Tres Virgenes-La Reforma, Baja California Sur, Mexico

USGS Publications Warehouse

Hook, S.J.; Dmochowski, J.E.; Howard, K.A.; Rowan, L.C.; Karlstrom, K.E.; Stock, J.M.

2005-01-01

Remotely sensed multispectral thermal infrared (8-13 ??m) images are increasingly being used to map variations in surface silicate mineralogy. These studies utilize the shift to longer wavelengths in the main spectral feature in minerals in this wavelength region (reststrahlen band) as the mineralogy changes from felsic to mafic. An approach is described for determining the amount of this shift and then using the shift with a reference curve, derived from laboratory data, to remotely determine the weight percent SiO2 of the surface. The approach has broad applicability to many study areas and can also be fine-tuned to give greater accuracy in a particular study area if field samples are available. The approach was assessed using airborne multispectral thermal infrared images from the Hiller Mountains, Nevada, USA and the Tres Virgenes-La Reforma, Baja California Sur, Mexico. Results indicate the general approach slightly overestimates the weight percent SiO2 of low silica rocks (e.g. basalt) and underestimates the weight percent SiO2 of high silica rocks (e.g. granite). Fine tuning the general approach with measurements from field samples provided good results for both areas with errors in the recovered weight percent SiO2 of a few percent. The map units identified by these techniques and traditional mapping at the Hiller Mountains demonstrate the continuity of the crystalline rocks from the Hiller Mountains southward to the White Hills supporting the idea that these ranges represent an essentially continuous footwall block below a regional detachment. Results from the Baja California data verify the most recent volcanism to be basaltic-andesite. ?? 2005 Elsevier Inc. All rights reserved.

Study of the Deposition of Ammonium Perchlorate Following the Static Firing of MK-58 Rocket Motors

DTIC Science & Technology

2008-10-01

hyperthyroidism , gas generators, electrolytes for lithium cells, and as chemical reagents. The occurrence of perchlorate in the environment is...contain 19.6 kg of cross-linked double based propellants, with 7.8 % by weight of binder, 62 % of RDX, 25.88 % of plasticizers, and a few percent...compound is present at less than 1% by weight in the propellant but it might be considered as a health hazard since it has adverse toxicological impacts

Benchmarking the inelastic neutron scattering soil carbon method

USDA-ARS?s Scientific Manuscript database

The herein described inelastic neutron scattering (INS) method of measuring soil carbon was based on a new procedure for extracting the net carbon signal (NCS) from the measured gamma spectra and determination of the average carbon weight percent (AvgCw%) in the upper soil layer (~8 cm). The NCS ext...

14 CFR 302.701 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-01-01

... establishment of mail rates by the Department for foreign air transportation and air transportation between... air carriers for the carriage of mail in foreign air transportation entered into pursuant to 39 U.S.C... per flight, and no more than five (5) percent, based on weight, of the international mail transported...

Nonflammable organic-base paint for oxygen-rich atmospheres

NASA Technical Reports Server (NTRS)

Harwell, R. J.; Key, C. F.; Krupnick, A. C.

1971-01-01

New paint formulations, which combine aqueous latex paints with inorganic pigments and additives, produce coatings that are self-extinguishing in pure oxygen at pressures up to twice the partial pressure of atmospheric oxygen. A paint formulation in percent by weight is given and the properties of resultant coatings are discussed.

7 CFR 2902.40 - Laundry products.

Code of Federal Regulations, 2010 CFR

2010-01-01

.... The minimum biobased content shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. The applicable... May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for...

14 CFR 31.12 - Proof of compliance.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) Except as provided in § 31.17(b), allowable weight tolerances during flight testing are +5 percent and... STANDARDS: MANNED FREE BALLOONS Flight Requirements § 31.12 Proof of compliance. (a) Each requirement of... requested or by calculations based on, and equal in accuracy to, the results of testing; and (2) Systematic...

14 CFR 31.12 - Proof of compliance.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) Except as provided in § 31.17(b), allowable weight tolerances during flight testing are +5 percent and... STANDARDS: MANNED FREE BALLOONS Flight Requirements § 31.12 Proof of compliance. (a) Each requirement of... requested or by calculations based on, and equal in accuracy to, the results of testing; and (2) Systematic...

14 CFR 31.12 - Proof of compliance.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) Except as provided in § 31.17(b), allowable weight tolerances during flight testing are +5 percent and... STANDARDS: MANNED FREE BALLOONS Flight Requirements § 31.12 Proof of compliance. (a) Each requirement of... requested or by calculations based on, and equal in accuracy to, the results of testing; and (2) Systematic...

14 CFR 31.12 - Proof of compliance.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) Except as provided in § 31.17(b), allowable weight tolerances during flight testing are +5 percent and... STANDARDS: MANNED FREE BALLOONS Flight Requirements § 31.12 Proof of compliance. (a) Each requirement of... requested or by calculations based on, and equal in accuracy to, the results of testing; and (2) Systematic...

14 CFR 31.12 - Proof of compliance.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Except as provided in § 31.17(b), allowable weight tolerances during flight testing are +5 percent and... STANDARDS: MANNED FREE BALLOONS Flight Requirements § 31.12 Proof of compliance. (a) Each requirement of... requested or by calculations based on, and equal in accuracy to, the results of testing; and (2) Systematic...

40 CFR 98.316 - Data reporting requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... analysis results of carbon content of petroleum coke as determined for QA/QC of supplier data under § 98...). (9) Monthly carbon content factor of petroleum coke from the supplier (percent by weight expressed as a decimal fraction). (10) Whether monthly carbon content of the petroleum coke is based on reports...

A low-carbohydrate as compared with a low-fat diet in severe obesity.

PubMed

Samaha, Frederick F; Iqbal, Nayyar; Seshadri, Prakash; Chicano, Kathryn L; Daily, Denise A; McGrory, Joyce; Williams, Terrence; Williams, Monica; Gracely, Edward J; Stern, Linda

2003-05-22

The effects of a carbohydrate-restricted diet on weight loss and risk factors for atherosclerosis have been incompletely assessed. We randomly assigned 132 severely obese subjects (including 77 blacks and 23 women) with a mean body-mass index of 43 and a high prevalence of diabetes (39 percent) or the metabolic syndrome (43 percent) to a carbohydrate-restricted (low-carbohydrate) diet or a calorie- and fat-restricted (low-fat) diet. Seventy-nine subjects completed the six-month study. An analysis including all subjects, with the last observation carried forward for those who dropped out, showed that subjects on the low-carbohydrate diet lost more weight than those on the low-fat diet (mean [+/-SD], -5.8+/-8.6 kg vs. -1.9+/-4.2 kg; P=0.002) and had greater decreases in triglyceride levels (mean, -20+/-43 percent vs. -4+/-31 percent; P=0.001), irrespective of the use or nonuse of hypoglycemic or lipid-lowering medications. Insulin sensitivity, measured only in subjects without diabetes, also improved more among subjects on the low-carbohydrate diet (6+/-9 percent vs. -3+/-8 percent, P=0.01). The amount of weight lost (P<0.001) and assignment to the low-carbohydrate diet (P=0.01) were independent predictors of improvement in triglyceride levels and insulin sensitivity. Severely obese subjects with a high prevalence of diabetes or the metabolic syndrome lost more weight during six months on a carbohydrate-restricted diet than on a calorie- and fat-restricted diet, with a relative improvement in insulin sensitivity and triglyceride levels, even after adjustment for the amount of weight lost. This finding should be interpreted with caution, given the small magnitude of overall and between-group differences in weight loss in these markedly obese subjects and the short duration of the study. Future studies evaluating long-term cardiovascular outcomes are needed before a carbohydrate-restricted diet can be endorsed. Copyright 2003 Massachusetts Medical Society

20 kHz, 25 kVA node power transformer

NASA Technical Reports Server (NTRS)

Hussey, S.

1989-01-01

The electrical and mechanical design information and the electrical and thermal testing performed on the 440-208-V rms, 20-kHz, 25-kVa prototype node transformer are summarized. The calculated efficiency of the node transformer is 99.3 percent based on core loss and copper loss test data, and its maximum calculated load regulation is 0.7 percent. The node transformer has a weight of 19.7 lb and has a power density of 0.8 lb/kW. The hot-spot temperature rise is estimated to be 33 C above the cold plate mounting base. This proof-of-concept transformer design is a viable candidate for the space station Freedom application.

Weight change and physical function in older women: findings from the Nun Study.

PubMed

Tully, C L; Snowdon, D A

1995-12-01

To investigate the association between change in weight and decline in physical function in older women. Longitudinal study of a defined population of Catholic sisters (nuns) whose weight and function were assessed twice, an average of 584 days apart. Unique life communities (convents) located throughout the United States. 475 Catholic sisters who were 75 to 99 years of age (M = 82.1, SD = 4.8) and were independent in at least one Activity of Daily Living (ADL) at the first assessment of weight and function. None. At each assessment, weight, ADLs, and cognitive function were evaluated as part of the Nun Study--a longitudinal study of aging and Alzheimer's disease. Annual percent weight change was calculated using weights from the two assessments, as well as the number of days that elapsed between assessments. Mean weight at first assessment was 140 pounds (range 78 to 232, SD = 27). The mean annual percent weight change was 0.1% (range 22% loss to 16% gain, SD = 3.8). Age- and initial weight-adjusted findings indicated that those participants with an annual percent weight loss of 3% or greater had 2.7 to 3.9 times the risk of becoming dependent in each ADL, compared to the sisters with no weight change. The elevated risk persisted in those who were mentally intact or were independent in their eating habits. Monitoring of weight may be an easy and inexpensive method of identifying older individuals at increased risk of disability.

Describing patterns of weight changes using principal components analysis: results from the Action for Health in Diabetes (Look AHEAD) research group.

PubMed

Espeland, Mark A; Bray, George A; Neiberg, Rebecca; Rejeski, W Jack; Knowler, William C; Lang, Wei; Cheskin, Lawrence J; Williamson, Don; Lewis, C Beth; Wing, Rena

2009-10-01

To demonstrate how principal components analysis can be used to describe patterns of weight changes in response to an intensive lifestyle intervention. Principal components analysis was applied to monthly percent weight changes measured on 2,485 individuals enrolled in the lifestyle arm of the Action for Health in Diabetes (Look AHEAD) clinical trial. These individuals were 45 to 75 years of age, with type 2 diabetes and body mass indices greater than 25 kg/m(2). Associations between baseline characteristics and weight loss patterns were described using analyses of variance. Three components collectively accounted for 97.0% of total intrasubject variance: a gradually decelerating weight loss (88.8%), early versus late weight loss (6.6%), and a mid-year trough (1.6%). In agreement with previous reports, each of the baseline characteristics we examined had statistically significant relationships with weight loss patterns. As examples, males tended to have a steeper trajectory of percent weight loss and to lose weight more quickly than women. Individuals with higher hemoglobin A(1c) (glycosylated hemoglobin; HbA(1c)) tended to have a flatter trajectory of percent weight loss and to have mid-year troughs in weight loss compared to those with lower HbA(1c). Principal components analysis provided a coherent description of characteristic patterns of weight changes and is a useful vehicle for identifying their correlates and potentially for predicting weight control outcomes.

Commingling effect of gynoid and android fat patterns on cardiometabolic dysregulation in normal weight American adults.

PubMed

Okosun, I S; Seale, J P; Lyn, R

2015-05-18

To determine the independent and commingling effect of android and gynoid percent fat (measured using Dual Energy X-Ray Absorptiometry) on cardiometabolic dysregulation in normal weight American adults. The 2005-2006 data (n=1802) from the United States National Health and Nutritional Examination Surveys (NHANES) were used in this study. Associations of android percent fat, gynoid percent fat and their joint occurrence with risks of cardiometabolic risk factors were estimated using prevalence odds ratios from logistic regression analyses. Android-gynoid percent fat ratio was more highly correlated with cardiometabolic dysregulation than android percent fat, gynoid percent fat or body mass index. Commingling of android and gynoid adiposities was associated with much greater odds of cardiometabolic risk factors than either android or gynoid adiposities. Commingling of android and gynoid adiposities was associated with 1.75 (95% confidence interval (CI)=1.42-2.93), 1.48 (95% CI=1.32-1.91), 1.61 (95% CI=1.50-1.89), 3.56 (95% CI=2.91-4.11) and 1.86 (95% CI=1.49-1.96) increased odds of elevated glucose, elevated blood pressure, elevated low-density lipoprotein-cholesterol, elevated triglyceride and low high-density lipoprotein-cholesterol, respectively. Normal weight subjects who present with both android and gynoid adiposities should be advised of the associated health risks. Both android and gynoid fat accumulations should be considered in developing public health strategies for reducing cardiometabolic disease risk in normal weight subjects.

Prevalence of Obesity in Carpal Tunnel Syndrome Patients: A Cross-Sectional Survey.

PubMed

Mansoor, Salman; Siddiqui, Maimoona; Mateen, Farrukh; Saadat, Shoab; Khan, Zarak H; Zahid, Mehr; Khan, Hamza H; Malik, Shuja A; Assad, Salman

2017-07-26

Carpal tunnel syndrome (CTS) is the most common compressive entrapment neuropathy caused by the compression of the median nerve at the wrist space known as the carpal tunnel. The epidemiologic factors related to CTS include genetic, medical, social, vocational, and demographic factors. The common symptoms experienced include pain, paresthesia, and numbness in the median nerve distribution. If left untreated, it can lead to irreversible median nerve damage, causing a loss of hand function. Body mass index (BMI) has been attributed as a risk factor for the development of CTS. We planned to determine the frequency of obesity among CTS patients in the neurophysiology department of a tertiary care center in Islamabad, Pakistan. The survey was designed as a cross-sectional descriptive study from March 2016 to August 2016 using a consecutive nonprobability sampling technique. A total of 112 patients with a mean age of 54 ± 5 years were included in the study. In the study population, 39 patients (35 percent) were males and 73 were females (65 percent). Based on BMI, 74 patients (66 percent) had a normal weight and 38 (34 percent) were obese. The frequency of obesity in our study was 34 percent, excluding the other comorbid conditions, which is quite high. Targeted therapy in those with CTS should also include weight reduction measures because obesity poses a cause-and-effect relationship for both the severity and the pathogenesis of CTS.

Population-based nutritional risk survey of pensioners in Yerevan, Armenia.

PubMed

McNabb, S J; Welch, K; Laumark, S; Peterson, D E; Ratard, R C; Toole, M J; Farley, T A

1994-01-01

Armenia, a republic of the former Soviet Union, currently suffers from hyperinflation of its currency, a five-year country-wide blockade, and a war with Azerbaijan. Pensioners 60 years of age or older may be at high risk for significant nutritional deficits. We drew a stratified systematic sample (with a random starting point) of 456 pensioner names from all eight administrative regions in Yerevan, the capital of Armenia. We administered a questionnaire that gathered data including self-reported weight and height, demographic characteristics, living conditions, medical and dietary history, income, and aid received from various sources. The survey yielded 381 of 456 (84%) completed interviews. Ninety-one percent reported their diet had gotten worse during the past six months, including less variety (83%) and quantity (85%) of food. Seventy-six percent reported they did not have enough money to buy food, and 91% had cut the size of their meals or skipped meals. Forty-five percent reported a weight loss of > or = 5 kg in the previous year. After we adjusted for potential confounders, weight loss of > or = 5 kg was associated with illness affecting eating (adjusted odds ratio [OR] = 2.2, 95% confidence intervals [CI] = 1.4, 3.4), not having received aid (adjusted OR = 2.2, 95% CI = 1.1, 4.1), and cutting the size of or skipping meals (OR = 2.7, 95% CI = 1.1, 6.7).(ABSTRACT TRUNCATED AT 250 WORDS)

Medical diagnosis of atherosclerosis from Carotid Artery Doppler Signals using principal component analysis (PCA), k-NN based weighting pre-processing and Artificial Immune Recognition System (AIRS).

PubMed

Latifoğlu, Fatma; Polat, Kemal; Kara, Sadik; Güneş, Salih

2008-02-01

In this study, we proposed a new medical diagnosis system based on principal component analysis (PCA), k-NN based weighting pre-processing, and Artificial Immune Recognition System (AIRS) for diagnosis of atherosclerosis from Carotid Artery Doppler Signals. The suggested system consists of four stages. First, in the feature extraction stage, we have obtained the features related with atherosclerosis disease using Fast Fourier Transformation (FFT) modeling and by calculating of maximum frequency envelope of sonograms. Second, in the dimensionality reduction stage, the 61 features of atherosclerosis disease have been reduced to 4 features using PCA. Third, in the pre-processing stage, we have weighted these 4 features using different values of k in a new weighting scheme based on k-NN based weighting pre-processing. Finally, in the classification stage, AIRS classifier has been used to classify subjects as healthy or having atherosclerosis. Hundred percent of classification accuracy has been obtained by the proposed system using 10-fold cross validation. This success shows that the proposed system is a robust and effective system in diagnosis of atherosclerosis disease.

Empirical assessment of indices of prey importance in the diets of predacious fish

USGS Publications Warehouse

Liao, H.; Pierce, C.L.; Larscheid, J.G.

2001-01-01

Determining the importance of prey taxa in the diets of predacious species is a frequent objective in fisheries research. Various indices of prey importance are in common use, and all give different results because of their emphasis on different aspects of fish diets. We explored these differences by empirically comparing four well-known indices-percent weight (%W), percent occurrence (%O), percent number (%N), and percent index of relative importance (%IRI)-as well as a modified %IRI (%MIRI), as applied to an extensive data set on the diets of six fish species in Spirit Lake, Iowa. Correlations among all indices were positive but were weaker among component indices (%W, %O, and %N) than between the two compound indices (%IRI and %MIRI); correlations among component indices were also weaker than correlations of compound with component indices. Correlation strength of %MIRI with the three component indices varied greatly (%N %O %W), whereas the correlation strength of %IRI with component indices was similar. Importance values based on %W, %MIRI, and %N depend more on prey size than those based on %IRI and %O. The %W and %MIRI emphasized the importance of large prey taxa, whereas %N emphasized small prey in diets; %IRI and %O were similarly unbiased with respect to prey size. The %O yielded substantially higher importance values than all other indices. Thus, for use as a general index of dietary importance, we believe %IRI provides the optimal balancing of frequency of occurrence, numerical abundance, and abundance by weight of taxa in fish diets.

Design and operation of the national home health aide survey: 2007-2008.

PubMed

Bercovitz, Anita; Moss, Abigail J; Sengupta, Manisha; Harris-Kojetin, Lauren D; Squillace, Marie R; Emily, Rosenoff; Branden, Laura

2010-03-01

This report provides an overview of the National Home Health Aide Survey (NHHAS), the first national probability survey of home health aides. NHHAS was designed to provide national estimates of home health aides who provided assistance in activities of daily living (ADLs) and were directly employed by agencies that provide home health and/or hospice care. This report discusses the need for and objectives of the survey, the design process, the survey methods, and data availability. METHODS NHHAS, a multistage probability sample survey, was conducted as a supplement to the 2007 National Home and Hospice Care Survey (NHHCS). Agencies providing home health and/or hospice care were sampled, and then aides employed by these agencies were sampled and interviewed by telephone. Survey topics included recruitment, training, job history, family life, client relations, work-related injuries, and demographics. NHHAS was virtually identical to the 2004 National Nursing Assistant Survey of certified nursing assistants employed in sampled nursing homes with minor changes to account for differences in workplace environment and responsibilities. RESULTS From September 2007 to April 2008, interviews were completed with 3,416 aides. A public-use data file that contains the interview responses, sampling weights, and design variables is available. The NHHAS overall response rate weighted by the inverse of the probability of selection was 41 percent. This rate is the product of the weighted first-stage agency response rate of 57 percent (i.e., weighted response rate of 59 percent for agency participation in NHHCS times the weighted response rate of 97 percent for agencies participating in NHHCS that also participated in NHHAS) and the weighted second-stage aide response rate of 72 percent to NHHAS.

Subcutaneous fat loss is greater than visceral fat loss with diet and exercise, weight-loss promoting drugs and bariatric surgery: a critical review and meta-analysis.

PubMed

Merlotti, C; Ceriani, V; Morabito, A; Pontiroli, A E

2017-05-01

Aim of this review is to compare visceral and subcutaneous fat loss with all available strategies (diet and exercise, weight-loss promoting agents and bariatric surgery). Eighty-nine studies, all full papers, were analyzed to evaluate visceral and subcutaneous fat changes, measured through ultrasound, computerized tomography, magnetic resonance imaging and expressed as thickness, weight, area and volume. Studies were included in a meta-analysis (random-effects model). Intervention effect (absolute and percent changes of visceral and subcutaneous fat) was expressed as standardized mean differences, with 95% confidence intervals. Publication bias was formally assessed. The result was that subcutaneous fat was greater than visceral fat when measured as area, volume and weight, not as thickness; decrease of subcutaneous fat was greater than visceral fat when measured as area, volume and weight, not as thickness; percent decrease of visceral fat was always greater than percent decrease of subcutaneous fat, with no differences between different strategies. No intervention preferentially targets visceral fat. Basal visceral fat depots are smaller than basal subcutaneous fat depots. Visceral fat loss is linked to subcutaneous fat loss. With all strategies, percent decrease of visceral fat prevails on subcutaneous fat loss.

Photosynthesis and Biomass Allocation in Oak Seedlings Grown Under Shade

Treesearch

Shi-Jean S. Sung; Paul P. Kormanik; Stanley J. Zarnoch

1998-01-01

Abstract-Northern red oak (Quercus rubra L.) (NRO) and white oak (Q. alba L.) (WO) acorns were sown into wooden plots and grown under 30 percent shade screen (30 percent S) or 70 percent shade screen (70 percent S). Seedlings grown under full sun were the controls (C). At the end of the first year, the 30 percent S NRO had 30 percent greater seedling dry weight (DW...

40 CFR Table 27 to Subpart Uuu of... - Continuous Compliance With Inorganic HAP Emission Limits for Catalytic Reforming Units

Code of Federal Regulations, 2011 CFR

2011-07-01

... percent by weight or to a concentration of 30 ppmv (dry basis), corrected to 3 percent oxygen. Maintaining...), corrected to 3 percent oxygen. 2. Each existing cyclic or continuous catalytic reforming unit Reduce... to 3 percent oxygen Maintaining a 97 percent HCl control efficiency or an HCl concentration no more...

40 CFR Table 27 to Subpart Uuu of... - Continuous Compliance With Inorganic HAP Emission Limits for Catalytic Reforming Units

Code of Federal Regulations, 2010 CFR

2010-07-01

... percent by weight or to a concentration of 30 ppmv (dry basis), corrected to 3 percent oxygen. Maintaining...), corrected to 3 percent oxygen. 2. Each existing cyclic or continuous catalytic reforming unit Reduce... to 3 percent oxygen Maintaining a 97 percent HCl control efficiency or an HCl concentration no more...

75 FR 55741 - Honey From Argentina: Notice of Extension of Time Limit for Preliminary Results and Partial...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-14

... Naturales-Natural Foods, Alma Pura, Bomare S.A., Compania Apicola Argentina S.A., El Mana S.A., Interrupcion... products covered are natural honey, artificial honey containing more than 50 percent natural honey by weight, preparations of natural honey containing more than 50 percent natural honey by weight, and...

40 CFR Table 2 to Subpart Eeee of... - Emission Limits

Code of Federal Regulations, 2010 CFR

2010-07-01

... emissions of total organic HAP (or, upon approval, TOC) by at least 95 weight-percent or, as an option, to... organic HAP (or, upon approval, TOC) by at least 95 weight-percent or, as an option, to an exhaust... total organic HAP (or, upon approval, TOC) from the loading of organic liquids either by venting the...

40 CFR Table 8 to Subpart Dddd of... - Continuous Compliance With the Work Practice Requirements

Code of Federal Regulations, 2012 CFR

2012-07-01

... with an inlet moisture content less than or equal to 30 percent (by weight, dry basis) AND operate with... inlet furnish moisture content at less than or equal to 30 percent (by weight, dry basis) AND... records of the inlet temperature of furnish moisture content and inlet dryer temperature. (2) Hardwood...

40 CFR Table 8 to Subpart Dddd of... - Continuous Compliance With the Work Practice Requirements

Code of Federal Regulations, 2014 CFR

2014-07-01

... with an inlet moisture content less than or equal to 30 percent (by weight, dry basis) AND operate with... inlet furnish moisture content at less than or equal to 30 percent (by weight, dry basis) AND... records of the inlet temperature of furnish moisture content and inlet dryer temperature. (2) Hardwood...

40 CFR Table 8 to Subpart Dddd of... - Continuous Compliance With the Work Practice Requirements

Code of Federal Regulations, 2013 CFR

2013-07-01

... with an inlet moisture content less than or equal to 30 percent (by weight, dry basis) AND operate with... inlet furnish moisture content at less than or equal to 30 percent (by weight, dry basis) AND... records of the inlet temperature of furnish moisture content and inlet dryer temperature. (2) Hardwood...

Trauma-Induced Weight Loss and Cognitive Deficits among Former Prisoners of War.

ERIC Educational Resources Information Center

Sutker, Patricia B.; And Others

1990-01-01

Compared former prisoners of war (POWs) reporting confinement weight losses greater than 35 percent (N=60), less than 35 percent (N=113), and non-POW combat veterans (N=50) on Wechsler Adult Intelligence Scale-Revised and Wechsler Memory Scale Logical Memory indices. Findings suggest that severe POW confinement stress reflected by trauma-induced…

Neutron and gamma radiation shielding material, structure, and process of making structure

DOEpatents

Hondorp, Hugh L.

1984-01-01

The present invention is directed to a novel neutron and gamma radiation elding material consisting of 95 to 97 percent by weight SiO.sub.2 and 5 to 3 percent by weight sodium silicate. In addition, the method of using this composition to provide a continuous neutron and gamma radiation shielding structure is disclosed.

7 CFR 51.2284 - Size classification.

Code of Federal Regulations, 2010 CFR

2010-01-01

...: “Halves”, “Pieces and Halves”, “Pieces” or “Small Pieces”. The size of portions of kernels in the lot... consists of 85 percent or more, by weight, half kernels, and the remainder three-fourths half kernels. (See § 51.2285.) (b) Pieces and halves. Lot consists of 20 percent or more, by weight, half kernels, and the...

77 FR 52265 - Airworthiness Directives; Eurocopter Deutschland GmbH Helicopters

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-29

... total area of corrosion or thread damage, or both, covers less than 25 percent of the length of the... paragraph (d)(3) of this AD. (B) If the total area of corrosion or thread damage, or both, covers 25 percent... to require inspections for corrosion or thread damage to each tail rotor balance weight (weight) and...

Factors contributing to initial weight loss among adolescents with polycystic ovary syndrome.

PubMed

Geier, L M; Bekx, M T; Connor, E L

2012-12-01

To evaluate the impact of a multidisciplinary clinic on weight management among adolescents with PCOS. 140 adolescent females were evaluated in a multidisciplinary PCOS clinic from March 2005 to December 2008. The team included a pediatric endocrinologist, health psychologist, dietitian, and pediatric gynecologist. 110 were diagnosed with PCOS based on the Rotterdam Criteria. Height, weight, BMI, number of subspecialists seen, use of metformin, and compliance with return visits were obtained from medical records. American Family Children's Hospital in Madison, Wisconsin. 110 adolescent females with polycystic ovary syndrome. Consultation with a dietitian and health psychologist. Change in weight. The average age at first visit was 15.9 years. The average BMI was 34.7 kg/m(2) (range 18.1-55.5). Seventy-six percent had an initial BMI above the 95(th) percentile. Interactions with providers at the initial visit included a pediatric endocrinologist (100%), health psychologist (60.9%), dietitian (75.5%) and gynecologist (70.9%). Seventy one percent returned for a follow-up visit, (average time of 4.5 months between visits) with 57% achieving weight loss (average 3.5 kg) and an additional 12.6% demonstrating no significant weight gain (< 1.5 kg). Thus, 69.6% demonstrated weight loss/stabilization. In this multidisciplinary clinic for adolescents with PCOS, nearly 70% of patients succeeded in short-term weight stabilization, with 57% demonstrating weight loss. Interactions with the health psychologist and dietitian appeared to play a key role in successful weight control, supporting the importance of psychology and nutrition expertise in the management of this disorder. Copyright © 2012 North American Society for Pediatric and Adolescent Gynecology. Published by Elsevier Inc. All rights reserved.

A cost-effective weight loss program at the worksite.

PubMed

Seidman, L S; Sevelius, G G; Ewald, P

1984-10-01

A major focus of Lockheed Missiles and Space Company's wellness program (Sunnyvale, Calif.) was to motivate weight loss in a cost-effective manner. The educationally based "Take It Off '83" campaign was created using the concepts of competition and self-responsibility. Seventy percent of the initial 2,499 participants completed the program, and 90% of these lost weight. Program completion rates and weight lost were higher for men than for women and higher for those who participated as team members rather than as individuals. Encouraging the formation of supportive/competitive teams proved to be a very effective means of promoting weight loss. The cost-effective motivation of weight loss in an industrial setting was accomplished successfully through this program (the cost to the company per initial participant was +5.40). Because of these results, the program will be repeated annually.

Qualification of M256 Breechblock Repair Procedure

DTIC Science & Technology

1994-03-01

Percent) Element Chemistry Carbon 0.30/0.40 Silicon 0.15/0.35 Manganese 0.40/0.70 Phosphorus 0.015 max Sulfur 0.015 max Aluminum 0.0 15 max Chromium 1.00...Weld Filler Metal, AWS A&28 Class ER120S.1 (Weight Percent) Element Chemistry Carbon 0.07 Silicon 0.35 Sulfur 0.0008 Phosphorus 0.0006 Chromium 0.45...14OS-l) (Weight Percent) Element Chemistry Carbon 0.11 Silicon 0.35 Sulfur 0.0008 Phosphorus 0.0005 Chromium 0.70 Nickel 2.60 Molybdenum 0.90 Manganese

Weight loss outcomes among patients referred after primary bariatric procedure.

PubMed

Obeid, Nabeel R; Malick, Waqas; Baxter, Andrew; Molina, Bianca; Schwack, Bradley F; Kurian, Marina S; Ren-Fielding, Christine J; Fielding, George A

2016-07-01

Bariatric patients may not always obtain long-term care by their primary surgeon. Our aim was to evaluate weight loss outcomes in patients who had surgery elsewhere. We conducted a retrospective analysis. Postreferral management included nonsurgical, revision, or conversion. Primary outcomes were percent excess weight loss (%EWL) overall, according to original operation, and based on postreferral management. Between 2001 and 2013, there were 569 patients. Mean follow-up was 3.1 years. Management was 42% nonsurgical, 41% revision, and 17% conversion. Overall, mean %EWL was 45.3%. Based on original surgery type, %EWL was 41.2% for adjustable gastric banding vs 58.3% for Roux-en-Y gastric bypass (P ≤ .0001). Management affected %EWL (41.2% nonsurgical vs 45.3% revision vs 55.1% conversion, P ≤ .0001). Patients referred after bariatric surgery can achieve satisfactory weight loss. This differs based on surgery type and management strategy. Copyright © 2015 Elsevier Inc. All rights reserved.

Strategic Analysis of the 2014 Wounded Warrior Project Annual Alumni Survey: A Way Forward

DTIC Science & Technology

2015-01-01

77 percent); back, neck, or shoulder problems (73 percent); depression (69 percent); anxiety (65 percent); tinnitus (56 percent); knee injuries or...percent); tinnitus (56 percent); knee injury or problem (52 percent); and migraine or other severe headache (50 percent). We did not weight the...of the Total Number of Respondents TBI 9,049 42.9 43.2 Tinnitus 11,745 55.7 54.5 Other severe physical injury 3,740 17.8 17.8 Other severe mental

Ultimate intrinsic-coercivity samarium-cobalt magnet: An Earth-based feasibility study for space-shuttle missions. [containerless melts

NASA Technical Reports Server (NTRS)

Das, D. K.; Kumar, K.; Frost, R. T.; Chang, C. W.

1980-01-01

Techniques for containerless melting and solidification of the samarium-cobalt alloy without excessive oxidation were developed. The rationale for extending these experiments in a weightless environment is also discussed. The effect of oxygen content from 0.15 to 0.63 weight percent and grain size in the range of 2 to 10 micrometers has been examined on arc-plasma-sprayed SmCo5 magnets. Contrary to expectations, the larger grain sizes tended to improve the coercivities. This was attributed to an increase in homogeneity resulting from higher temperature treatments used to produce larger grain size. No significant differences in coercivity were observed on the basis of oxygen content in the range examined. It is expected that more meaningful data on the relationship between oxygen content and coercivity will be seen when the oxygen content can be lowered to less than 0.1 weight percent.

Directionally solidified eutectic gamma plus beta nickel-base superalloys

NASA Technical Reports Server (NTRS)

Jackson, M. R. (Inventor)

1977-01-01

A directionally solidified multivariant eutectic gamma + beta nickel-base superalloy casting having improved high temperature strength and oxidation resistance properties is provided. This comprises a two phase eutectic structure containing, on a weight percent basis, 5.0-15.0 tungsten, 8.5-14.5 aluminum, 0.0-35.0 cobalt and the balance being nickel. Embedded within the gamma phase nickel-base matrix are aligned eutectic beta phase (primarily (NiCo)Al reinforcing lamellae.

21 CFR 573.750 - Pichia pastoris dried yeast.

Code of Federal Regulations, 2010 CFR

2010-04-01

... the following percent-by-weight specifications: (1) Crude protein, not less than 60 percent. (2) Crude fat, not less than 2 percent. (3) Crude fiber, not more than 2 percent. (4) Ash, not more than 13... pastoris dried yeast may be used in feed formulations of broiler chickens as a source of protein not to...

21 CFR 573.750 - Pichia pastoris dried yeast.

Code of Federal Regulations, 2011 CFR

2011-04-01

... the following percent-by-weight specifications: (1) Crude protein, not less than 60 percent. (2) Crude fat, not less than 2 percent. (3) Crude fiber, not more than 2 percent. (4) Ash, not more than 13... pastoris dried yeast may be used in feed formulations of broiler chickens as a source of protein not to...

21 CFR 573.750 - Pichia pastoris dried yeast.

Code of Federal Regulations, 2012 CFR

2012-04-01

... the following percent-by-weight specifications: (1) Crude protein, not less than 60 percent. (2) Crude fat, not less than 2 percent. (3) Crude fiber, not more than 2 percent. (4) Ash, not more than 13... pastoris dried yeast may be used in feed formulations of broiler chickens as a source of protein not to...

21 CFR 573.750 - Pichia pastoris dried yeast.

Code of Federal Regulations, 2014 CFR

2014-04-01

... the following percent-by-weight specifications: (1) Crude protein, not less than 60 percent. (2) Crude fat, not less than 2 percent. (3) Crude fiber, not more than 2 percent. (4) Ash, not more than 13... pastoris dried yeast may be used in feed formulations of broiler chickens as a source of protein not to...

21 CFR 573.750 - Pichia pastoris dried yeast.

Code of Federal Regulations, 2013 CFR

2013-04-01

... the following percent-by-weight specifications: (1) Crude protein, not less than 60 percent. (2) Crude fat, not less than 2 percent. (3) Crude fiber, not more than 2 percent. (4) Ash, not more than 13... pastoris dried yeast may be used in feed formulations of broiler chickens as a source of protein not to...

Label Identification from Statistical Tabulation (LIST) temporal extendability study. [North Dakota, South Dakota, and Minnesota

NASA Technical Reports Server (NTRS)

Dennis, T. B. (Principal Investigator)

1980-01-01

The author has identified the following significant results. The most apparent contributors to the problem of poor temporal extension of LIST are the drastic changes in the brightness keys and an inadequate set of AI responses in Phase 3. The brightness trajectories change drastically from Phase 3 to the transition year (TY). Removing brightness channels from the discriminant does not completely correct the lack of extendability. Removing brightness increases the accuracy of the extension from Phase 3 to TY from 57.7 percent to 64.18 percent. The removal of the Al keys increases accuracy to 65.76 percent. Although the latter increase appears insignificant when compared to the first, the removal of only the Al keys increased accuracy to 63.58 percent. Proper weighting of the responses explains 73.8 percent of the ground truth labels but only 56.7 percent of the Al labels. By contrast, the TY responses which were weighted to explain the TY ground truth labels fared equally well, explaining 73.6 percent of those labels and 87.1 percent of the Al labels.

Teammates and social influence affect weight loss outcomes in a team-based weight loss competition.

PubMed

Leahey, Tricia M; Kumar, Rajiv; Weinberg, Brad M; Wing, Rena R

2012-07-01

Team-based internet interventions are increasing in popularity as a way of promoting weight loss in large numbers of individuals. Given that social networks influence health behavior change, this study investigated the effects of teammates and social influence on individual weight loss during a team-based weight loss competition. Shape Up Rhode Island (SURI) 2009 was a 12-week online program open to adult residents of Rhode Island. Participants joined with a team and competed with other teams on weight loss and/or physical activity. Overweight/obese (OW/OB) individuals (N = 3,330; 76% female; age = 46.1 ± 10.8; BMI = 31.2 ± 5.3 kg/m(2)), representing 987 teams, completed the weight loss program. Multilevel modeling was used to examine whether weight loss clustered among teammates and whether percentage of teammates in the weight loss division and reported teammate influence on weight loss were associated with individual weight outcomes. OW/OB completers reported losing 4.2 ± 3.4% of initial body weight. Weight loss was similar among teammates (intraclass correlation coefficient (ICC) = 0.10, P < 0.001). Moreover, having a greater percentage of teammates in the weight loss division and reporting higher social influence for weight loss were associated with greater percent weight loss (P's ≤ 0.002). Similarly, achieving a clinically significant (5%) weight loss tended to cluster within teams (ICC = 0.09; P < 0.001) and having more teammates in the weight loss division and higher social influence for weight loss were associated with increased likelihood of achieving a 5% weight loss (odds ratio (OR) = 1.06; OR = 1.20, respectively). These results suggest that teammates affect weight loss outcomes during a team-based intervention. Harnessing and maximizing teammate influence for weight loss may enhance weight outcomes in large-scale team-based programs.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vandersall, K S; Tarver, C M; Garcia, F

Shock initiation experiments on the HMX based explosives LX-10 (95% HMX, 5% Viton by weight) and LX-07 (90% HMX, 10% Viton by weight) were performed to obtain in-situ pressure gauge data, run-distance-to-detonation thresholds, and Ignition and Growth modeling parameters. A 101 mm diameter propellant driven gas gun was utilized to initiate the explosive samples with manganin piezoresistive pressure gauge packages placed between sample slices. The run-distance-to-detonation points on the Pop-plot for these experiments and prior experiments on another HMX based explosive LX LX-04 (85% HMX, 15% Viton by weight) will be shown, discussed, and compared as a function of themore » binder content. This parameter set will provide additional information to ensure accurate code predictions for safety scenarios involving HMX explosives with different percent binder content additions.« less

High explosive compound

DOEpatents

Crawford, Theodore C.

1976-01-01

1. A low detonation velocity explosive consisting essentially of a particulate mixture of ortho-boric acid and trinitrotoluene, said mixture containing from about 25 percent to about 65 percent by weight of ortho-boric acid, said ortho-boric acid comprised of from 60 percent to 90 percent of spherical particles having a mean particle size of about 275 microns and 10 percent to 40 percent of spherical particles having a particle size less than about 44 microns.

Determination of lunar ilmenite abundances from remotely sensed data

NASA Technical Reports Server (NTRS)

Larson, Stephen M.; Johnson, Jeffrey R.; Singer, Robert B.

1991-01-01

The mineral ilmenite (FeTiO3) was found in abundance in lunar mare soils returned during the Apollo project. Lunar ilmenite often contains greater than 50 weight-percent titanium dioxide (TiO2), and is a primary potential resource for oxygen and other raw materials to supply future lunar bases. Chemical and spectroscopic analysis of the returned lunar soils produced an empirical function that relates the spectral reflectance ratio at 400 and 560 nm to the weight percent abundance of TiO2. This allowed mapping of the lunar TiO2 distribution using telescopic vidicon multispectral imaging from the ground; however, the time variant photometric response of the vidicon detectors produced abundance uncertainties of at least 2 to 5 percent. Since that time, solid-state charge-coupled device (CCD) detector technology capable of much improved photometric response has become available. An investigation of the lunar TiO2 distribution was carried out utilizing groundbased telescopic CCD multispectral imagery and spectroscopy. The work was approached in phases to develop optimum technique based upon initial results. The goal is to achieve the best possible TiO2 abundance maps from the ground as a precursor to lunar orbiter and robotic sample return missions, and to produce a better idea of the peak abundances of TiO2 for benefaction studies. These phases and the results are summarized.

78 FR 51143 - Aluminum Extrusions From the People's Republic of China: Initiation of Changed Circumstances...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-20

... the major alloying element, with manganese accounting for not more than 3.0 percent of total materials... magnesium accounting for at least 0.1 percent but not more than 2.0 percent of total materials by weight, and silicon accounting for at least 0.1 percent but not more than 3.0 percent of total materials by...

Away-from-home family dinner sources and associations with weight status, body composition and related biomarkers of chronic disease among adolescents and their parents

PubMed Central

Farbakhsh, Kian; Lytle, Leslie; Hearst, Mary O.; Dengel, Donald R.; Pasch, Keryn E.; Kubik, Martha Y.

2011-01-01

Information regarding associations between types of away-from-home family meal sources and obesity and other chronic diseases could help guide dietitians. The present study describes the purchase frequency of away-from-home food sources for family dinner (fast food, other restaurant purchases, home delivery, and take-out foods) and associations with weight status and percent body fat among adolescents (n=723) and parents (n=723) and related biomarkers of chronic disease among adolescents (n=367). A cross-sectional study design was used with baseline parent surveys and anthropometry/fasting blood samples from two community-based obesity studies (2006–2008) in Minnesota. Logistic regression and general linear modeling assessed associations between frequency of family dinner sources (weekly versus none in past week) and outcomes (parent and adolescent overweight/obesity and percent body fat; adolescent metabolic risk cluster z-score (MRC), cholesterol, HDL-C, LDL, triglycerides, fasting glucose, insulin and systolic blood pressure. Models accounted for clustering and adjusted for study allocation, baseline meal frequency and demographic characteristics. The odds of overweight/obesity were significantly greater when families reported at least one away-from-home dinner purchase in the past week (OR=1.2–2.6). Mean percent body fat, MRC z-scores and insulin levels were significantly greater with weekly purchases of family dinner from fast food restaurants (p’s < .05). Mean percent body fat, MRC z-scores and HDL levels were significantly higher for families who purchased weekly family dinner from take-out sources (p’s < .05). Although frequent family dinners may be beneficial for adolescents, the source of dinners is likely as important in maintaining a healthy weight. Interventions should focus on encouragement of healthful family meals. PMID:22117665

12 CFR 217.32 - General risk weights.

Code of Federal Regulations, 2014 CFR

2014-01-01

... percent of the appraised value of the property; A Board-regulated institution must base all estimates of a property's value on an appraisal or evaluation of the property that satisfies subpart E of 12 CFR part 208... depository institutions or in transit, and to gold bullion held in a subsidiary depository institution's own...

7 CFR 1940.592 - Community facilities grants.

Code of Federal Regulations, 2010 CFR

2010-01-01

...). (b) Basic formula criteria, data source, and weight. See § 1940.552(b). (1) The criteria used in the... percentage of National rural population with income below the poverty level—50 percent. (2) Data source for each of these criterion is based on the latest census data available. Each criterion is assigned a...

High fiber-low matrix composites: kenaf fiber/polypropylene.

Treesearch

Anand R. Sanadi; J.F. Hunt; D.F. Caulfield; G. Kovacsvolgyi; B. Destree

2002-01-01

Considerable interest has been generated in the use of lignocellulosic fibers and wastes (both agricultural and wood based) as fillers and reinforcements in thermoplastics. In general, present technologies limit fiber loading in thermoplastics to about 60 percent by weight of fiber. To produce high fiber content composites for commercial use while maintaining adequate...

7 CFR 51.1437 - Size classifications for halves.

Code of Federal Regulations, 2014 CFR

2014-01-01

... halves per pound shall be based upon the weight of half-kernels after all pieces, particles and dust... specified range. (d) Tolerances for pieces, particles, and dust. In order to allow for variations incident..., particles, and dust: Provided, That not more than one-third of this amount, or 5 percent, shall be allowed...

7 CFR 51.1437 - Size classifications for halves.

Code of Federal Regulations, 2013 CFR

2013-01-01

... halves per pound shall be based upon the weight of half-kernels after all pieces, particles and dust... specified range. (d) Tolerances for pieces, particles, and dust. In order to allow for variations incident..., particles, and dust: Provided, That not more than one-third of this amount, or 5 percent, shall be allowed...

7 CFR 2902.34 - Carpet and upholstery cleaners.

Code of Federal Regulations, 2010 CFR

2010-01-01

... upholstery cleaners shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. The applicable minimum biobased... compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a...

Dense protective coatings, methods for their preparation and coated articles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tulyani, Sonia; Bhatia, Tania; Smeggil, John G.

A method for depositing a protective coating on a complex shaped substrate includes the steps of: (1) dipping a complex shaped substrate into a slurry to form a base coat thereon, the slurry comprising an aqueous solution, at least one refractory metal oxide, and at least one transient fluid additive present in an amount of about 0.1 percent to 10 percent by weight of the slurry; (2) curing the dipped substrate; (3) dipping the substrate into a precursor solution to form a top barrier coat thereon; and (4) heat treating the dipped, cured substrate to form a protective coating.

21 CFR 178.2650 - Organotin stabilizers in vinyl chloride plastics.

Code of Federal Regulations, 2014 CFR

2014-04-01

...-octyl)tin S,S′-bis(isooctylmercaptoacetate) is an octyltin chemical having 15.1 to 16.4 percent by weight of tin (Sn) and having 8.1 to 8.9 percent by weight of mercapto sulfur. It is made from di(n-octyl)tin dichloride or di(n-octyl)tin oxide. The isooctyl radical in the mercaptoacetate is derived from...

Corrosion rates of fasteners in treated wood exposed to 100% relative humidity

Treesearch

Samuel L. Zelinka; Douglas R. Rammer

2009-01-01

In the past, gravimetric corrosion data for fasteners exposed to treated wood has been reported as a percent weight loss. Although percent weight loss is a valid measure of corrosion for comparing identical fasteners, it can distort the corrosion performance of fasteners with different geometries and densities. This report reevaluates a key report on the corrosiveness...

77 FR 38299 - Agency Information Collection Activities; Submission for Office of Management and Budget Review...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-27

... 0910-New) I. Background A recent study of obesity indicates that 35.5 percent of men and 35.8 percent... were spent in 2008 to treat obesity-related diseases (Ref. 2). Studies have shown that weight loss can significantly reduce the burden of obesity-related comorbidities (Refs. 3 and 4), and that weight lost as a...

7 CFR 52.1858 - Grades of mixed types or varieties of raisins.

Code of Federal Regulations, 2013 CFR

2013-01-01

... moisture, in accordance with this subpart. Mixed types of processed raisins of U.S. Grade A, U.S. Grade B, or U.S. Grade C may contain not more than 18 percent, by weight, of moisture. Mixed types of processed raisins that as a mixture exceed 18 percent, by weight, of moisture are “Substandard.” ...

40 CFR Table 6 to Subpart Dddd of... - Initial Compliance Demonstrations for Work Practice Requirements

Code of Federal Regulations, 2010 CFR

2010-07-01

... moisture content less than or equal to 30 percent (by weight, dry basis) AND operate with an inlet dryer... dryer” AND you have a record of the inlet moisture content and inlet dryer temperature (as required in... an inlet moisture content of less than or equal to 25 percent (by weight, dry basis) You meet the...

40 CFR Table 6 to Subpart Dddd of... - Initial Compliance Demonstrations for Work Practice Requirements

Code of Federal Regulations, 2011 CFR

2011-07-01

... moisture content less than or equal to 30 percent (by weight, dry basis) AND operate with an inlet dryer... dryer” AND you have a record of the inlet moisture content and inlet dryer temperature (as required in... an inlet moisture content of less than or equal to 25 percent (by weight, dry basis) You meet the...

7 CFR 52.1858 - Grades of mixed types or varieties of raisins.

Code of Federal Regulations, 2014 CFR

2014-01-01

... moisture, in accordance with this subpart. Mixed types of processed raisins of U.S. Grade A, U.S. Grade B, or U.S. Grade C may contain not more than 18 percent, by weight, of moisture. Mixed types of processed raisins that as a mixture exceed 18 percent, by weight, of moisture are “Substandard.” ...

Commingling effect of gynoid and android fat patterns on cardiometabolic dysregulation in normal weight American adults

PubMed Central

Okosun, I S; Seale, J P; Lyn, R

2015-01-01

Aim: To determine the independent and commingling effect of android and gynoid percent fat (measured using Dual Energy X-Ray Absorptiometry) on cardiometabolic dysregulation in normal weight American adults. Methods: The 2005–2006 data (n=1802) from the United States National Health and Nutritional Examination Surveys (NHANES) were used in this study. Associations of android percent fat, gynoid percent fat and their joint occurrence with risks of cardiometabolic risk factors were estimated using prevalence odds ratios from logistic regression analyses. Results: Android-gynoid percent fat ratio was more highly correlated with cardiometabolic dysregulation than android percent fat, gynoid percent fat or body mass index. Commingling of android and gynoid adiposities was associated with much greater odds of cardiometabolic risk factors than either android or gynoid adiposities. Commingling of android and gynoid adiposities was associated with 1.75 (95% confidence interval (CI)=1.42–2.93), 1.48 (95% CI=1.32–1.91), 1.61 (95% CI=1.50–1.89), 3.56 (95% CI=2.91–4.11) and 1.86 (95% CI=1.49–1.96) increased odds of elevated glucose, elevated blood pressure, elevated low-density lipoprotein-cholesterol, elevated triglyceride and low high-density lipoprotein-cholesterol, respectively. Conclusions: Normal weight subjects who present with both android and gynoid adiposities should be advised of the associated health risks. Both android and gynoid fat accumulations should be considered in developing public health strategies for reducing cardiometabolic disease risk in normal weight subjects. PMID:25985091

Gas chromatographic simulated distillation-mass spectrometry for the determination of the boiling point distributions of crude oils

PubMed

Roussis; Fitzgerald

2000-04-01

The coupling of gas chromatographic simulated distillation with mass spectrometry for the determination of the distillation profiles of crude oils is reported. The method provides the boiling point distributions of both weight and volume percent amounts. The weight percent distribution is obtained from the measured total ion current signal. The total ion current signal is converted to weight percent amount by calibration with a reference crude oil of a known distillation profile. Knowledge of the chemical composition of the crude oil across the boiling range permits the determination of the volume percent distribution. The long-term repeatability is equivalent to or better than the short-term repeatability of the currently available American Society for Testing and Materials (ASTM) gas chromatographic method for simulated distillation. Results obtained by the mass spectrometric method are in very good agreement with results obtained by conventional methods of physical distillation. The compositional information supplied by the method can be used to extensively characterize crude oils.

Weight and Veterans' Environments Study (WAVES) I and II: Rationale, Methods, and Cohort Characteristics.

PubMed

Zenk, Shannon N; Tarlov, Elizabeth; Powell, Lisa M; Wing, Coady; Matthews, Stephen A; Slater, Sandy; Gordon, Howard S; Berbaum, Michael; Fitzgibbon, Marian L

2018-03-01

To present the rationale, methods, and cohort characteristics for 2 complementary "big data" studies of residential environment contributions to body weight, metabolic risk, and weight management program participation and effectiveness. Retrospective cohort. Continental United States. A total of 3 261 115 veterans who received Department of Veterans Affairs (VA) health care in 2009 to 2014, including 169 910 weight management program participants and a propensity score-derived comparison group. The VA MOVE! weight management program, an evidence-based lifestyle intervention. Body mass index, metabolic risk measures, and MOVE! participation; residential environmental attributes (eg, food outlet availability and walkability); and MOVE! program characteristics. Descriptive statistics presented on cohort characteristics and environments where they live. Forty-four percent of men and 42.8% of women were obese, whereas 4.9% of men and 9.9% of women engaged in MOVE!. About half of the cohort had at least 1 supermarket within 1 mile of their home, whereas they averaged close to 4 convenience stores (3.6 for men, 3.9 for women) and 8 fast-food restaurants (7.9 for men, 8.2 for women). Forty-one percent of men and 38.6% of women did not have a park, and 35.5% of men and 31.3% of women did not have a commercial fitness facility within 1 mile. Drawing on a large nationwide cohort residing in diverse environments, these studies are poised to significantly inform policy and weight management program design.

Rhizosphere of Avicennia marina (Forsk.) Vierh. as a landmark for polythene degrading bacteria.

PubMed

Shahnawaz, Mohd; Sangale, Manisha K; Ade, Avinash B

2016-07-01

Due to high durability, cheap cost, and ease of manufacture, 311 million tons of plastic-based products are manufactured around the globe per annum. The slow/least rate of plastic degradation leads to generation of million tons of plastic waste per annum, which is of great environmental concern. Of the total plastic waste generated, polythene shared about 64 %. Various methods are available in the literature to tackle with the plastic waste, and biodegradation is considered as the most accepted, eco-friendly, and cost-effective method of polythene waste disposal. In the present study, an attempt has been made to isolate, screen, and characterize the most efficient polythene degrading bacteria by using rhizosphere soil of Avicennia marina as a landmark. From 12 localities along the west coast of India, a total of 123 bacterial isolates were recorded. Maximum percent weight loss (% WL; 21.87 ± 6.37 %) was recorded with VASB14 at pH 3.5 after 2 months of shaking at room temperature. Maximum percent weight gain (13.87 ± 3.6 %) was reported with MANGB5 at pH 7. Maximum percent loss in tensile strength (% loss in TS; 87.50 ± 4.8 %) was documented with VASB1 at pH 9.5. The results based on the % loss in TS were only reproducible. Further, the level of degradation was confirmed by scanning electron microscopic (SEM) and Fourier transform infrared spectroscopy (FTIR) analysis. In SEM analysis, scions/crakes were found on the surface of the degraded polythene, and mass of bacterial cell was also recorded on the weight-gained polythene strips. Maximum reduction in carbonyl index (4.14 %) was recorded in untreated polythene strip with Lysinibacillus fusiformis strain VASB14/WL. Based on 16S ribosomal RNA (rRNA) gene sequence homology, the most efficient polythene degrading bacteria were identified as L. fusiformis strainVASB14/WL and Bacillus cereus strain VASB1/TS.

Carcass yield traits of kids from a complete diallel of Boer, Kiko, and Spanish meat goat breeds semi-intensively managed on humid subtropical pasture.

PubMed

Browning, R; Phelps, O; Chisley, C; Getz, W R; Hollis, T; Leite-Browning, M L

2012-03-01

Bucklings (n = 275) from a complete diallel of Boer, Kiko, and Spanish meat goats were slaughtered at 7 mo of age (4 mo postweaning) to evaluate genetic effects on carcass yield. Breed of sire did not affect (P > 0.05) live, carcass, and primal weights. Conversely, breed of dam was a consistently significant source of variation for carcass weight traits. Kiko dams produced kids with heavier (P < 0.05) live, carcass, and primal weights than Boer dams. Weights from Spanish dams were intermediate to Boer and Kiko with the significance of differences varying by trait. Cold carcass dressing percent was affected (P < 0.01) by breeds of sire and dam. Boer sires decreased (P < 0.05) dressing percent compared with Kiko and Spanish sires. Dressing percent was also less (P < 0.01) from Boer dams than from Kiko dams; Spanish dams were intermediate and did not differ (P > 0.05) from Boer or Kiko. Subjective conformation scores for muscularity were affected (P < 0.01) by breeds of sire and dam. Boer-sired kids had better (P < 0.01) live scores than Kiko-sired kids. Progeny of Boer dams had better (P < 0.05) live scores than progeny of Spanish dams. Boer-sired kids also had better carcass scores (P < 0.05) than Kiko-sired and Spanish-sired kids. Breed differences for primal cut proportions were negligible. Proportional boneless meat yields did not vary (P > 0.05) by breeds of sire or dam. Direct effects of Boer were negative for carcass weight, dressing percent, and shoulder weight and positive for proportional leg weight. Direct effects of Kiko were positive for carcass weight and shoulder weight and negative for proportional leg weight. Direct effects of Spanish did not differ (P > 0.10) from 0 for any trait tested. Heterosis levels were similar among breed pairings. Heterosis was substantial (P ≤ 0.05) for live, carcass, and primal weights (5 to 9%) but not for dressing percent, proportional boneless meat yield, or primal weight proportions (<2%). Significant genetic variation was observed among goat breeds for carcass yield traits. Dam breed was more influential than sire breed. Boer germplasm was not superior to Kiko or Spanish germplasm for carcass yield when semi-intensively managed on humid, subtropical pasture. Results emphasize the importance of comparative breed evaluations to provide industry with reliable information on carcass yield among goat genotypes.

The Penn State Heart Assistant: A pilot study of a web-based intervention to improve self-care of heart failure patients.

PubMed

Lloyd, Tom; Buck, Harleah; Foy, Andrew; Black, Sara; Pinter, Antony; Pogash, Rosanne; Eismann, Bobby; Balaban, Eric; Chan, John; Kunselman, Allen; Smyth, Joshua; Boehmer, John

2017-05-01

The Penn State Heart Assistant, a web-based, tablet computer-accessed, secure application was developed to conduct a proof of concept test, targeting patient self-care activities of heart failure patients including daily medication adherence, weight monitoring, and aerobic activity. Patients (n = 12) used the tablet computer-accessed program for 30 days-recording their information and viewing a short educational video. Linear random coefficient models assessed the relationship between weight and time and exercise and time. Good medication adherence (66% reporting taking 75% of prescribed medications) was reported. Group compliance over 30 days for weight and exercise was 84 percent. No persistent weight gain over 30 days, and some indication of weight loss (slope of weight vs time was negative (-0.17; p value = 0.002)), as well as increased exercise (slope of exercise vs time was positive (0.08; p value = 0.04)) was observed. This study suggests that mobile technology is feasible, acceptable, and has potential for cost-effective opportunities to manage heart failure patients safely at home.

Fatigue strength of common tibial intramedullary nail distal locking screws

PubMed Central

Griffin, Lanny V; Harris, Robert M; Zubak, Joseph J

2009-01-01

Background Premature failure of either the nail and/or locking screws with unstable fracture patterns may lead to angulation, shortening, malunion, and IM nail migration. Up to thirty percent of all unreamed nail locking screws can break after initial weight bearing is allowed at 8–10 weeks if union has not occurred. The primary problem this presents is hardware removal during revision surgery. The purposes of our study was to evaluate the relative fatigue resistance of distal locking screws and bolts from representative manufacturers of tibial IM nail systems, and develop a relative risk assessment of screws and materials used. Evaluations included quantitative and qualitative measures of the relative performance of these screws. Methods Fatigue tests were conducted to simulate a comminuted fracture that was treated by IM nailing assuming that all load was carried by the screws. Each screw type was tested ten times in a single screw configuration. One screw type was tested an additional ten times in a two-screw parallel configuration. Fatigue tests were performed using a servohydraulic materials testing system and custom fixturing that simulated screws placed in the distal region of an appropriately sized tibial IM nail. Fatigue loads were estimated based on a seventy-five kilogram individual at full weight bearing. The test duration was one million cycles (roughly one year), or screw fracture, whichever occurred first. Failure analysis of a representative sample of titanium alloy and stainless steel screws included scanning electron microscopy (SEM) and quantitative metallography. Results The average fatigue life of a single screw with a diameter of 4.0 mm was 1200 cycles, which would correspond roughly to half a day of full weight bearing. Single screws with a diameter of 4.5 mm or larger have approximately a 50 percent probability of withstanding a week of weight bearing, whereas a single 5.0 mm diameter screw has greater than 90 percent probability of withstanding more than a week of weight bearing. If two small diameter screws are used, our tests showed that the probability of withstanding a week of weight bearing increases from zero to about 20 percent, which is similar to having a single 4.5 mm diameter screw providing fixation. Conclusion Our results show that selecting the system that uses the largest distal locking screws would offer the best fatigue resistance for an unstable fracture pattern subjected to full weight bearing. Furthermore, using multiple screws will substantially reduce the risk of premature hardware failure. PMID:19371438

The effect of weight change on changes in breast density measures over menopause in a breast cancer screening cohort.

PubMed

Wanders, Johanna Olga Pauline; Bakker, Marije Fokje; Veldhuis, Wouter Bernard; Peeters, Petra Huberdina Maria; van Gils, Carla Henrica

2015-05-30

High weight and high percentage mammographic breast density are both breast cancer risk factors but are negatively correlated. Therefore, we wanted to obtain more insight into this apparent paradox. We investigated in a longitudinal study how weight change over menopause is related to changes in mammographic breast features. Five hundred ninety-one participants of the EPIC-NL cohort were divided into three groups according to their prospectively measured weight change over menopause: (1) weight loss (more than -3.0 %), (2) stable weight (between -3.0 % and +3.0 %), and (3) weight gain (more than 3.0 %). SPSS GLM univariate analysis was used to determine both the mean breast measure changes in, and the trend over, the weight change groups. Over a median period of 5 years, the mean changes in percent density in these groups were -5.0 % (95 % confidence interval (CI) -8.0; -2.1), -6.8 % (95 % CI -9.0; -4.5), and -10.2 % (95 % CI -12.5; -7.9), respectively (P-trend = 0.001). The mean changes in dense area were -16.7 cm(2) (95 % CI -20.1; -13.4), -16.4 cm(2) (95 % CI -18.9; -13.9), and -18.1 cm(2) (95 % CI -20.6; -15.5), respectively (P-trend = 0.437). Finally, the mean changes in nondense area were -6.1 cm(2) (95 % CI -11.9; -0.4), -0.6 cm(2) (95 % CI -4.9; 3.8), and 5.3 cm(2) (95 % CI 0.9; 9.8), respectively (P-trend < 0.001). Going through menopause is associated with a decrease in both percent density and dense area. Owing to an increase in the nondense tissue, the decrease in percent density is largest in women who gain weight. The decrease in dense area is not related to weight change. So the fact that both high percent density and high weight or weight gain are associated with high postmenopausal breast cancer risk can probably not be explained by an increase (or slower decrease) of dense area in women gaining weight compared with women losing weight or maintaining a stable weight. These results suggest that weight and dense area are presumably two independent postmenopausal breast cancer risk factors.

A Simple Noise Correction Scheme for Diffusional Kurtosis Imaging

PubMed Central

Glenn, G. Russell; Tabesh, Ali; Jensen, Jens H.

2014-01-01

Purpose Diffusional kurtosis imaging (DKI) is sensitive to the effects of signal noise due to strong diffusion weightings and higher order modeling of the diffusion weighted signal. A simple noise correction scheme is proposed to remove the majority of the noise bias in the estimated diffusional kurtosis. Methods Weighted linear least squares (WLLS) fitting together with a voxel-wise, subtraction-based noise correction from multiple, independent acquisitions are employed to reduce noise bias in DKI data. The method is validated in phantom experiments and demonstrated for in vivo human brain for DKI-derived parameter estimates. Results As long as the signal-to-noise ratio (SNR) for the most heavily diffusion weighted images is greater than 2.1, errors in phantom diffusional kurtosis estimates are found to be less than 5 percent with noise correction, but as high as 44 percent for uncorrected estimates. In human brain, noise correction is also shown to improve diffusional kurtosis estimates derived from measurements made with low SNR. Conclusion The proposed correction technique removes the majority of noise bias from diffusional kurtosis estimates in noisy phantom data and is applicable to DKI of human brain. Features of the method include computational simplicity and ease of integration into standard WLLS DKI post-processing algorithms. PMID:25172990

Water based drilling mud additive

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCrary, J.L.

1983-12-13

A water based fluid additive useful in drilling mud used during drilling of an oil or gas well is disclosed, produced by reacting water at temperatures between 210/sup 0/-280/sup 0/ F. with a mixture comprising in percent by weight: gilsonite 25-30%, tannin 7-15%, lignite 25-35%, sulfonating compound 15-25%, water soluble base compound 5-15%, methylene-yielding compound 1-5%, and then removing substantially all of the remaining water to produce a dried product.

Weight loss, weight regain, and conversions to Roux-en-Y gastric bypass: 10-year results of laparoscopic sleeve gastrectomy.

PubMed

Felsenreich, Daniel M; Langer, Felix B; Kefurt, Ronald; Panhofer, Peter; Schermann, Martin; Beckerhinn, Philipp; Sperker, Christoph; Prager, Gerhard

2016-11-01

With promising short-term results, laparoscopic sleeve gastrectomy (SG) has become the second most frequently performed bariatric procedure worldwide. Aside from a growing number of reports covering up to 10 years of follow-up, only limited data have been published so far on long-term results. The aim of the study was to present a 10-year follow-up for SG. University hospital setting, Austria. We present the first complete 10-year follow-up of 53 consecutive patients who underwent SG before 2006. In this multicenter study, weight loss success, weight regain, and revisional surgery were analyzed beside Bariatric Analysis and Reporting Outcome System (BAROS) scores. A mean maximum percent excess weight loss of 71±25% (percent total weight loss: 28±15%) was reached at a median of 12 (range 12-120) months after SG. At 10 years, a mean percent excess weight loss of 53±25% was achieved by 32 patients, corresponding to a percent total weight loss of 26.3±13.4%. Nineteen of the 53 patients (36%) were converted to Roux-en-Y gastric bypass (n = 18) or duodenal switch (n = 1) due to significant weight regain (n = 11), reflux (n = 6), or acute revision (n = 2) at a median of 36 months. Two patients died at 3 and 101 months postoperatively, unrelated to SG. A total of 31 patients (59%) suffered from weight regain of 10 kg or more, among them 24 patients (45%) with 15 kg or more, 16 patients (30%) with 20 kg or more, and 7 patients (13%) with 25 kg or more weight regain from nadir. Mean BAROS score was 2.4±2.2 at 10 years follow-up, classifying SG as "fairly efficient." Within a long-term follow-up of 10 years or more after SG, a high incidence of both significant weight regain and intractable reflux was observed, leading to conversion, most commonly to Roux-en-Y gastric bypass. Copyright © 2016 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

Preliminary Study of Advanced Turboprops for Low Energy Consumption

NASA Technical Reports Server (NTRS)

Kraft, G. A.; Strack, W. C.

1975-01-01

The fuel savings potential of advanced turboprops (operational about 1985) was calculated and compared with that of an advanced turbofan for use in an advanced subsonic transport. At the design point, altitude 10.67 km and Mach 0.80, turbine-inlet temperature was fixed at 1590 K while overall pressure ratio was varied from 25 to 50. The regenerative turboprop had a pressure ratio of only 10 and an 85 percent effective rotary heat exchanger. Variable camber propellers were used with an efficiency of 85 percent. The study indicated a fuel savings of 33 percent, a takeoff gross weight reduction of 15 percent, and a direct operating cost reduction of 18 percent was possible when turboprops were used instead of the reference turbofan at a range of 10 200 km. These reductions were 28, 11, and 14 percent, respectively, at a range of 5500 km. Increasing overall pressure ratio from 25 to 50 saved little fuel and slightly increased takeoff gross weight.

21 CFR 178.2650 - Organotin stabilizers in vinyl chloride plastics.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) (1), (2), (3), (4), (5), (6), and (7) of this section. (1) Di(n-octyl)tin S,S′-bis(isooctylmercaptoacetate) is an octyltin chemical having 15.1 to 16.4 percent by weight of tin (Sn) and having 8.1 to 8.9 percent by weight of mercapto sulfur. It is made from di(n-octyl)tin dichloride or di(n-octyl)tin oxide...

21 CFR 178.2650 - Organotin stabilizers in vinyl chloride plastics.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) (1), (2), (3), (4), (5), (6), and (7) of this section. (1) Di(n-octyl)tin S,S′-bis(isooctylmercaptoacetate) is an octyltin chemical having 15.1 to 16.4 percent by weight of tin (Sn) and having 8.1 to 8.9 percent by weight of mercapto sulfur. It is made from di(n-octyl)tin dichloride or di(n-octyl)tin oxide...

21 CFR 178.2650 - Organotin stabilizers in vinyl chloride plastics.

Code of Federal Regulations, 2013 CFR

2013-04-01

...) (1), (2), (3), (4), (5), (6), and (7) of this section. (1) Di(n-octyl)tin S,S′-bis(isooctylmercaptoacetate) is an octyltin chemical having 15.1 to 16.4 percent by weight of tin (Sn) and having 8.1 to 8.9 percent by weight of mercapto sulfur. It is made from di(n-octyl)tin dichloride or di(n-octyl)tin oxide...

21 CFR 178.2650 - Organotin stabilizers in vinyl chloride plastics.

Code of Federal Regulations, 2012 CFR

2012-04-01

...) (1), (2), (3), (4), (5), (6), and (7) of this section. (1) Di(n-octyl)tin S,S′-bis(isooctylmercaptoacetate) is an octyltin chemical having 15.1 to 16.4 percent by weight of tin (Sn) and having 8.1 to 8.9 percent by weight of mercapto sulfur. It is made from di(n-octyl)tin dichloride or di(n-octyl)tin oxide...

50 CFR 648.80 - NE Multispecies regulated mesh areas and restrictions on gear and methods of fishing.

Code of Federal Regulations, 2011 CFR

2011-10-01

... lobster—up to 10 percent, by weight, of all other species on board or 200 lobsters, whichever is less... specified in § 648.94(c)(4), whichever is less; and American lobster—up to 10 percent, by weight, of all other species on board or 200 lobsters, whichever is less, unless otherwise restricted by landing limits...

40 CFR Table F-2 to Subpart F of... - Default Data Sources for Parameters Used for CO2 Emissions

Code of Federal Regulations, 2014 CFR

2014-07-01

... metric ton Al (metric tons C/metric tons Al) Individual facility records. Sa: sulfur content in baked anode (percent weight) 2.0. Asha: ash content in baked anode (percent weight) 0.4. CO2 Emissions From... records. Hw: annual hydrogen content in green anodes (metric tons) 0.005 × GA. BA: annual baked anode...

40 CFR Table F-2 to Subpart F of... - Default Data Sources for Parameters Used for CO2 Emissions

Code of Federal Regulations, 2013 CFR

2013-07-01

... metric ton Al (metric tons C/metric tons Al) Individual facility records. Sa: sulfur content in baked anode (percent weight) 2.0. Asha: ash content in baked anode (percent weight) 0.4. CO2 Emissions From... records. Hw: annual hydrogen content in green anodes (metric tons) 0.005 × GA. BA: annual baked anode...

40 CFR Table F-2 to Subpart F of... - Default Data Sources for Parameters Used for CO2 Emissions

Code of Federal Regulations, 2012 CFR

2012-07-01

... metric ton Al (metric tons C/metric tons Al) Individual facility records. Sa: sulfur content in baked anode (percent weight) 2.0. Asha: ash content in baked anode (percent weight) 0.4. CO2 Emissions From... records. Hw: annual hydrogen content in green anodes (metric tons) 0.005 × GA. BA: annual baked anode...

40 CFR Table F-2 to Subpart F of... - Default Data Sources for Parameters Used for CO2 Emissions

Code of Federal Regulations, 2011 CFR

2011-07-01

... metric ton Al (metric tons C/metric tons Al) Individual facility records. Sa: sulfur content in baked anode (percent weight) 2.0. Asha: ash content in baked anode (percent weight) 0.4. CO2 Emissions From... records. Hw: annual hydrogen content in green anodes (metric tons) 0.005 × GA. BA: annual baked anode...

Early Development of the Low SES Infant Weighing Less Than 1001 Grams at Birth.

ERIC Educational Resources Information Center

Finello, Karen M.; And Others

To evaluate outcomes in infants of very low birth weight born in 1982-83 to families of extremely low socioeconomic status (SES), 33 infants who weighed less than 1001 grams at birth and survived the nursery period were followed for 1 year. The sample was 79 percent Hispanic and 58 percent female. Mean birth weight was 868 grams and mean…

40 CFR Table 6 to Subpart Dddd of... - Initial Compliance Demonstrations for Work Practice Requirements

Code of Federal Regulations, 2013 CFR

2013-07-01

... furnish with an inlet moisture content less than or equal to 30 percent (by weight, dry basis) AND operate... criteria of a “dry rotary dryer” AND you have a record of the inlet moisture content and inlet dryer... an inlet moisture content of less than or equal to 25 percent (by weight, dry basis) You meet the...

40 CFR Table 6 to Subpart Dddd of... - Initial Compliance Demonstrations for Work Practice Requirements

Code of Federal Regulations, 2014 CFR

2014-07-01

... furnish with an inlet moisture content less than or equal to 30 percent (by weight, dry basis) AND operate... criteria of a “dry rotary dryer” AND you have a record of the inlet moisture content and inlet dryer... an inlet moisture content of less than or equal to 25 percent (by weight, dry basis) You meet the...

40 CFR Table 6 to Subpart Dddd of... - Initial Compliance Demonstrations for Work Practice Requirements

Code of Federal Regulations, 2012 CFR

2012-07-01

... furnish with an inlet moisture content less than or equal to 30 percent (by weight, dry basis) AND operate... criteria of a “dry rotary dryer” AND you have a record of the inlet moisture content and inlet dryer... an inlet moisture content of less than or equal to 25 percent (by weight, dry basis) You meet the...

Precipitation hardening austenitic superalloys

DOEpatents

Korenko, Michael K.

1985-01-01

Precipitation hardening, austenitic type superalloys are described. These alloys contain 0.5 to 1.5 weight percent silicon in combination with about 0.05 to 0.5 weight percent of a post irradiation ductility enhancing agent selected from the group of hafnium, yttrium, lanthanum and scandium, alone or in combination with each other. In addition, when hafnium or yttrium are selected, reductions in irradiation induced swelling have been noted.

Two-year follow-up of an adolescent behavioral weight control intervention.

PubMed

Lloyd-Richardson, Elizabeth E; Jelalian, Elissa; Sato, Amy F; Hart, Chantelle N; Mehlenbeck, Robyn; Wing, Rena R

2012-08-01

This study examined the 24-month outcomes of a randomized controlled trial of a group-based behavioral weight control (BWC) program combined with either activity-based peer intervention or aerobic exercise. At baseline, 118 obese adolescents (68% female; BMI = 31.41 ± 3.33) ages 13 to 16 years (mean = 14.33; SD = 1.02) were randomized to receive 1 of 2 weight loss interventions. Both interventions received the same 16-week group-based cognitive-behavioral treatment, combined with either aerobic exercise or peer-based adventure therapy. Eighty-nine adolescents (75% of original sample) completed the 24-month follow-up. Anthropometric and psychosocial measures were obtained at baseline, at the end of the 16-week intervention, and at 12 and 24 months following randomization. An intent-to-treat mixed factor analysis of variance indicated a significant effect for time on both percent over 50th percentile BMI for age and gender and standardized BMI score, with no differences by intervention group. Post hoc comparisons showed a significant decrease in percent overweight at 4 months (end of treatment), which was maintained at both 12- and 24-month follow-up visits. Significant improvements on several dimensions of self-concept were noted, with significant effects on physical appearance self-concept that were maintained through 24 months. Both BWC conditions were effective at maintaining reductions in adolescent obesity and improvements in physical appearance self-concept through 24-month follow-up. This study is one of the first to document long-term outcomes of BWC intervention among adolescents.

Front air bag nondeployments in frontal crashes fatal to drivers or right-front passengers.

PubMed

Braver, Elisa R; McCartt, Anne T; Sherwood, Christopher P; Zuby, David S; Blanar, Laura; Scerbo, Marge

2010-04-01

Public concern has arisen about the reliability of front air bags because Fatality Analysis Reporting System (FARS) data indicate many nondeployed air bags in fatal frontal crashes. However, the accuracy of air bag deployment, the variable in question, is uncertain. This study aimed to provide more certain estimates of nondeployment incidence in fatal frontal crashes. Fatally injured passenger vehicle drivers and right-front passengers in frontal crashes were identified in two U.S. databases for calendar years 1998-2006 and model years 1994-2006: FARS, a census of police-reported fatal crashes on public roads, and National Automotive Sampling System/Crashworthiness Data System (NASS/CDS), a probability sample of tow-away crashes. NASS/CDS contains subsets of fatal crashes in FARS and collects detailed data using crash investigators. Front air bag deployment coding for front-seat occupant fatalities was compared in FARS and NASS/CDS, and case reviews were conducted. Among FARS frontal deaths with available deployment status (N = 43,169), front air bags were coded as not deployed for 18 percent of front occupants. In comparison, NASS/CDS (N = 628) reported 9 percent (weighted estimate) nondeployment among front occupants killed. Among crashes common to both databases, NASS/CDS reported deployments for 45 percent of front occupant deaths for which FARS had coded nondeployments. Detailed case reviews of NASS/CDS crashes indicated highly accurate coding for deployment status. Based on this case review, 8 percent (weighted estimate) of front occupant deaths in frontal crashes appeared to involve air bag nondeployments; 1-2 percent of front occupant deaths represented potential system failures where deployments would have been expected. Air bag deployments appeared unwarranted in most nondeployments based on crash characteristics. FARS data overstate the magnitude of the problem of air bag deployment failures; steps should be taken to improve coding. There are inherent uncertainties in judgments about whether or not air bags would be expected to deploy in some crashes. Continued monitoring of air bag performance is warranted.

Preliminary study of effects of winglets on wing flutter

NASA Technical Reports Server (NTRS)

Doggett, R. V., Jr.; Farmer, M. G.

1976-01-01

Some experimental flutter results are presented over a Mach number range from about 0.70 to 0.95 for a simple, swept, tapered, flat-plate wing model having a planform representative of subsonic transport airplanes and for the same wing model equipped with two different upper surface winglets. Both winglets had the same planform and area (about 2 percent of the basic-wing area); however, one weighed about 0.3 percent of the basic-wing weight, and the other weighed about 1.8 percent of the wing weight. The addition of the lighter winglet reduced the wing-flutter dynamic pressure by about 3 percent; the heavier winglet reduced the wing-flutter dynamic pressure by about 12 percent. The experimental flutter results are compared at a Mach number of 0.80 with analytical flutter results obtained by using doublet-lattice and lifting-surface (kernel-function) unsteady aerodynamic theories.

United States Navy Nutrition Culture and How Best to Select Food While Underway

DTIC Science & Technology

2013-12-13

3000 to 4500 calories, 10 to 15 percent of calories from protein , 55 to 70 percent from carbohydrates, and 20 to 30 percent from fat (United States...given for age, weight, or gender, with protein taking 10 to 15 percent, carbohydrates taking up 55 to 70 percent, and fat taking 20 to 30 percent of...servings for grains, protein /dairy, fruits, vegetables, fats , and calories for each of the six eating times per day (Commander Navy Installations Command

Parametric trade studies on a Shuttle 2 launch system architecture

NASA Technical Reports Server (NTRS)

Stanley, Douglas O.; Talay, Theodore A.; Lepsch, Roger A.; Morris, W. Douglas; Naftel, J. Christopher; Cruz, Christopher I.

1991-01-01

A series of trade studies are presented on a complementary architecture of launch vehicles as a part of a study often referred to as Shuttle-2. The results of the trade studies performed on the vehicles of a reference Shuttle-2 mixed fleet architecture have provided an increased understanding of the relative importance of each of the major vehicle parameters. As a result of trades on the reference booster-orbiter configuration with a methane booster, the study showed that 60 percent of the total liftoff thrust should be on the booster and 40 percent on the orbiter. It was also found that the liftoff thrust to weight ratio (T/W) on the booster-orbiter should be 1.3. This leads to a low dry weight and still provides enough thrust to allow the design of a heavy lift architecture. As a result of another trade study, the dry weight of the reference booster-orbiter was chosen for a variety of operational considerations. Other trade studies on the booster-orbiter demonstrate that the cross feeding of propellant during boost phase is desirable and that engine-out capability from launch to orbit is worth the performance penalty. Technology assumptions made during the Shuttle-2 design were shown to be approx. equivalent to a 25 percent across the board weight reduction over the Space Shuttle technology. The vehicles of the Shuttle-2 architecture were also sized for a wide variety of payloads and missions to different orbits. Many of these same parametric trades were also performed on completely liquid hydrogen fueled fully reusable concepts. If a booster-orbiter is designed using liquid hydrogen engines on both the booster and orbiter, the total vehicle dry weight is only 3.0 percent higher than the reference dual-fuel booster-orbiter, and the gross weight is 3.8 percent less. For this booster-orbiter vehicle, a liftoff T/W of 1.3, a thrust of about 60 percent on the booster, and a Mach staging number of 3 all proved to be desirable. This modest dry weight increase for a liquid hydrogen fueled Shuttle-2 system should be more than offset by the elimination of the entire hydrocarbon engine development program and the savings in operation cost realized by the elimination of an entire fuel type.

7 CFR 52.3188 - Work sheet for dried prunes.

Code of Federal Regulations, 2011 CFR

2011-01-01

... defects, including off-color and poor texture 20 percent Poor texture, end cracks, skin or flesh damage, 3..., decay But no more than 6 percent But no more than 8 percent End cracks,2 skin or flesh damage, 3... (including all factors) 1 Percentages of defects are “by weight.” 2 Except that each 1 percent of end cracks...

Predictors of long-term weight maintenance.

PubMed

Vogels, Neeltje; Diepvens, Kristel; Westerterp-Plantenga, Margriet S

2005-12-01

The purpose of this study was to evaluate available variables of a long-term weight maintenance study to investigate possible factors predisposing to weight regain after a period of weight loss. The Maastricht Weight Maintenance Study is an ongoing longitudinal study of healthy men and women (29 men and 62 women; 18 to 65 years of age; BMI = 30.2 +/- 3.1 kg/m(2)). A variety of parameters were measured before and after a very-low-energy diet and after a follow-up of at least 2 years. Mean weight loss was 7.9 +/- 3.6 kg, and percent weight regain was 113.8 +/- 98.1%. Percent BMI regain was negatively associated with an increase in dietary restraint (r = -0.47, p < 0.05). Percent weight regain was negatively correlated with baseline resting metabolic rate (r = -0.38, p = 0.01) and baseline fat mass (r = -0.24, p = 0.05) and positively correlated with the magnitude of change in body weight (BW) expressed as maximum amplitude of BW (r = 0.21, p < 0.05). In addition, amplitude of BW was positively correlated with the frequency of dieting (r = 0.57, p < 0.01). The best predictors for weight maintenance after weight loss were an increase in dietary restraint during weight loss, a high baseline resting metabolic rate, a relatively high baseline fat mass favoring a fat-free mass-sparing effect during weight loss, a rather stable BW, and a low frequency of dieting. Therefore, BW maintenance after BW loss seems to be a multifactorial issue, including mechanisms that regulate an individuals' energy expenditure, body composition, and eating behavior in such a way that energy homeostasis is maintained.

Muscular development and lean body weight in body builders and weight lifters.

PubMed

Katch, V L; Katch, F I; Moffatt, R; Gittleson, M

1980-01-01

The extent of extreme muscular development in 39 males identified as body builders (N = 18), power weight lifters (N = 13), and Olympic weight lifters (N = 8) were studied. Body composition and anthropometric data, including calculations of pre-excess muscle body weight (scale weight minus excess muscle) were obtained. The lean body weight and percent fats of the subjects were: body builders = 74.6 kg, 9.3%; power weight lifters = 73.3 kg, 9.1%; and Olympic weight lifters = 68.2 kg, 10.8%. No group differences were present in frame size, percent fat, lean body weight, skinfolds, and diameter measurements. The only group differences were for the shoulders, chest, biceps relaxed and flexed, and forearm girths. In each case the body builders were larger. Calculations of excess muscle by the Behnke method revealed that the body builders had 15.6 kg excess muscle, power weight lifters 14.8 kg, and Olympic weight lifters 13.1 kg. Somatographic comparisons revealed only slight differences between the groups, while differences with reference man were substantial.

African american women, hair care, and health barriers.

PubMed

Gathers, Raechele Cochran; Mahan, Meredith Grace

2014-09-01

The objective of this study was to elucidate the prevalence of hair loss among African American women; explore the psychosocial impact of hair grooming difficulties; and examine both perceptions related to physician encounters in this group and the relationship between hair grooming, physical activity, and weight maintenance. An anonymous retrospective and qualitative survey, the Hair Care Assessment Survey, is an 18-question novel survey instrument designed at the Henry Ford Hospital Department of Dermatology Multicultural Dermatology Center. The Hair Care Assessment Survey was distributed at church-related functions at predominantly African American metropolitan Detroit churches. Two hundred African American women from metropolitan Detroit, Michigan, aged 21 to 83. The Hair Care Assessment Survey collected data relating to hair loss and hair care, psychosocial experiences relating to hair loss, and hair care as it relates to exercise and body weight management. Data was collected on doctor-patient hair-related medical visits and experiences with commercially available ethnic hair care products. More than 50 percent reported excessive hair loss. Twenty-eight percent had visited a physician to discuss hair issues, but only 32 percent felt their physician understood African American hair. Forty-five percent reported avoiding exercise because of hair concerns, and 22 percent felt that their hair impeded maintaining healthy body weight. Hair loss affects a compelling number of African American women, and a significant number express dissatisfaction in hair-related physician encounters. Additionally, hair styling problems present a serious impediment to physical activity and weight management among this already high-risk population.

NC Data Guide to Child Well-being, 1998.

ERIC Educational Resources Information Center

North Carolina Child Advocacy Inst., Raleigh.

This Kids Count report examines county and statewide trends in the well-being of North Carolina's children from the 1970s through the 1990s. The statistical portrait is based on 40 indicators of well-being in five categories: (1) demographics; (2) physical well-being, including infant mortality rate and percent low birth weight; (3) intellectual…

77 FR 10424 - Approval and Promulgation of Implementation Plans; Wisconsin; Volatile Organic Compound Emission...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-22

... organic compounds (TOC) (minus methane and ethane) by 98 weight-percent or to a TOC (minus methane and...- effectiveness) per unit reduction of TOC associated with an individual vent stream, based on vent stream flow rate, emission rate of TOC, net heating value and corrosion properties, whether or not the vent stream...

40 CFR Table 6 to Subpart Eeee of... - Initial Compliance With Emission Limits

Code of Federal Regulations, 2010 CFR

2010-07-01

... approval, TOC) emissions by at least 95 weight-percent, or as an option for nonflare combustion devices to an exhaust concentration of ≤20 ppmv Total organic HAP (or, upon approval, TOC) emissions, based on..., or new affected source Reduce total organic HAP (or, upon approval, TOC) emissions from the loading...

Idaho Kids Count Data Book, 1996: Profiles of Child Well-Being.

ERIC Educational Resources Information Center

Idaho KIDS COUNT Project, Boise.

This Kids Count report examines statewide trends in the well-being of Idaho's children. The statistical portrait is based on 15 indicators of child and family well-being: (1) poverty; (2) single parent families; (3) infant mortality; (4) low birth weight babies; (5) percent of all mothers not receiving adequate prenatal care; (6) mothers ages…

Tough poly(arylene ether) thermoplastics as modifiers for bismaleimides

NASA Technical Reports Server (NTRS)

Stenzenberger, H. D.; Roemer, W.; Hergenrother, P. M.; Jensen, B. J.

1989-01-01

Several aspects of research on thermoplastics as toughness modifiers are discussed, including the contribution of the backbone chemistry and the concentration of the poly(arylene ether) thermoplastic to fracture toughness, influence of the molecular weight of the poly(arylene ether) thermoplastic on neat resin fracture toughness, and the morphology of the thermoplastic modified networks. The results show that fracture toughness of brittle bismaleimide resins can be improved significantly with poly(arylene ether) thermoplastic levels of 20 percent by weight, and that high molecular weight poly(arylene ether) based on bisphenol A provides the highest degree of toughening. Preliminary composite evaluation shows that improvements in neat resin toughness translate into carbon fabric composite.

Upper-stage space shuttle propulsion by means of separate scramjet and rocket engines

NASA Technical Reports Server (NTRS)

Franciscus, L. C.; Allen, J. L.

1972-01-01

A preliminary mission study of a reusable vehicle from staging to orbit indicates payload advantages for a dual-propulsion system consisting of separate scramjet and rocket engines. In the analysis the scramjet operated continuously and the initiation of rocket operation was varied. For a stage weight of 500,000 lb the payload was 10.4 percent of stage weight or 70 percent greater than that of a comparable all-rocket-powered stage. When compared with a reusable two-state rocket vehicle having 50,000 lb payload, the use of the dual propulsion system for the second stage resulted in significant decreases in lift-off weight and empty weight, indicating possible lower hardware costs.

Organic cathode for a secondary battery

NASA Technical Reports Server (NTRS)

Bugga, Ratnakumar V. (Inventor); Distefano, Salvador (Inventor); Williams, Roger M. (Inventor); Bankston, Clyde P. (Inventor)

1989-01-01

A liquid catholyte for a battery based on liquid metal such as sodium anode and a solid, ceramic separator such as beta alumina (BASE) comprises a mixture of a Group I-III metal salt such as sodium tetrachloroaluminate and a minor amount of an organic carbonitrile depolarizer having at least one adjacent ethylenic band such as 1 to 40 percent by weight of tetracyanoethylene. The tetracyanoethylene forms an adduct with the molten metal salt.

A 6-month telephone-based weight loss intervention in overweight and obese subjects with idiopathic intracranial hypertension.

PubMed

Weil, Richard; Kovacs, Betty; Miller, Neil; McDermott, Michael P; Wall, Michael; Kupersmith, Mark; Pi-Sunyer, F Xavier

2016-06-01

The purpose of this paper is to measure the change in body weight after a 6-month telephone-based weight loss intervention in overweight and obese subjects with idiopathic intracranial hypertension (IIH) and mild visual loss randomized to receive either acetazolamide or placebo. One hundred sixty-five subjects with IIH, aged 29.1 ± 7.5 (mean ± SD) and BMI 39.9 + 8.3 kg/m 2 , enrolled at 38 academic and private practice sites in North America, participated in this trial. This was a randomized, double-masked, placebo-controlled trial of acetazolamide in subjects with IIH and mild visual loss. All participants received a reduced-sodium, weight-reduction diet and a 6-month telephone-based weight loss intervention. Six-month changes from baseline in body weight, perimetric mean deviation as assessed by automated perimetry and quality of life using the National Eye Institute Visual Function Questionnaire 25 and the 36-item Short Form Health Survey were measured. Mean percent weight change at 6 months was -5.9% ± 6.7% of initial body weight overall, -3.5% ± 5.9% in the placebo group and -7.8% ± 6.8% in the acetazolamide group. Weight change was not associated with changes in either mean deviation or quality of life scores. Patients with IIH and mild visual loss assigned to either acetazolamide or placebo, all of whom received a 6-month telephone-based weight loss intervention, lost an average of 5.9% of initial body weight, consistent with NHLBI guidelines of 5% to 10% of body weight loss for clinically significant health benefit.

Aircraft-Fuel-Tank Design for Liquid Hydrogen

NASA Technical Reports Server (NTRS)

Reynolds, T W

1955-01-01

Some of the considerations involved in the design of aircraft fuel tanks for liquid hydrogen are discussed herein. Several of the physical properties of metals and thermal insulators in the temperature range from ambient to liquid-hydrogen temperatures are assembled. Calculations based on these properties indicate that it is possible to build a large-size liquid-hydrogen fuel tank which (1) will weigh less then 15 percent of the fuel weight, (2) will have a hydrogen vaporization rate less than 30 percent of the cruise fuel-flow rate, and (3) can be held in a stand-by condition and readied for flight in a short time.

Development and Application of Regression Models for Estimating Nutrient Concentrations in Streams of the Conterminous United States, 1992-2001

USGS Publications Warehouse

Spahr, Norman E.; Mueller, David K.; Wolock, David M.; Hitt, Kerie J.; Gronberg, JoAnn M.

2010-01-01

Data collected for the U.S. Geological Survey National Water-Quality Assessment program from 1992-2001 were used to investigate the relations between nutrient concentrations and nutrient sources, hydrology, and basin characteristics. Regression models were developed to estimate annual flow-weighted concentrations of total nitrogen and total phosphorus using explanatory variables derived from currently available national ancillary data. Different total-nitrogen regression models were used for agricultural (25 percent or more of basin area classified as agricultural land use) and nonagricultural basins. Atmospheric, fertilizer, and manure inputs of nitrogen, percent sand in soil, subsurface drainage, overland flow, mean annual precipitation, and percent undeveloped area were significant variables in the agricultural basin total nitrogen model. Significant explanatory variables in the nonagricultural total nitrogen model were total nonpoint-source nitrogen input (sum of nitrogen from manure, fertilizer, and atmospheric deposition), population density, mean annual runoff, and percent base flow. The concentrations of nutrients derived from regression (CONDOR) models were applied to drainage basins associated with the U.S. Environmental Protection Agency (USEPA) River Reach File (RF1) to predict flow-weighted mean annual total nitrogen concentrations for the conterminous United States. The majority of stream miles in the Nation have predicted concentrations less than 5 milligrams per liter. Concentrations greater than 5 milligrams per liter were predicted for a broad area extending from Ohio to eastern Nebraska, areas spatially associated with greater application of fertilizer and manure. Probabilities that mean annual total-nitrogen concentrations exceed the USEPA regional nutrient criteria were determined by incorporating model prediction uncertainty. In all nutrient regions where criteria have been established, there is at least a 50 percent probability of exceeding the criteria in more than half of the stream miles. Dividing calibration sites into agricultural and nonagricultural groups did not improve the explanatory capability for total phosphorus models. The group of explanatory variables that yielded the lowest model error for mean annual total phosphorus concentrations includes phosphorus input from manure, population density, amounts of range land and forest land, percent sand in soil, and percent base flow. However, the large unexplained variability and associated model error precluded the use of the total phosphorus model for nationwide extrapolations.

Research requirements to reduce empty weight of helicopters by use of advanced materials

NASA Technical Reports Server (NTRS)

Hoffstedt, D. J.

1976-01-01

Utilization of the new, lightweight, high-strength, aerospace structural-composite (filament/matrix) materials, when specifically designed into a new aircraft, promises reductions in structural empty weight of 12 percent at recurring costs competive with metals. A program of basic and applied research and demonstration is identified with the objective of advancing the state of the art to the point where civil helicopters are confidently designed, produced, certified, and marketed by 1985. A structural empty-weight reduction of 12 percent was shown to significantly reduce energy consumption in modern high-performance helicopters.

Osteocalcin carboxylation is not associated with body weight or percent fat changes during weight loss in post-menopausal women.

PubMed

Centi, Amanda J; Booth, Sarah L; Gundberg, Caren M; Saltzman, Edward; Nicklas, Barbara; Shea, M Kyla

2015-12-01

Osteocalcin (OC) is a vitamin K-dependent bone protein used as a marker of bone formation. Mouse models have demonstrated a role for the uncarboxylated form of OC (ucOC) in energy metabolism, including energy expenditure and adiposity, but human data are equivocal. The purpose of this study was to determine the associations between changes in measures of OC and changes in body weight and percent body fat in obese, but otherwise healthy post-menopausal women undergoing a 20-week weight loss program. All participants received supplemental vitamins K and D and calcium. Body weight and body fat percentage (%BF) were assessed before and after the intervention. Serum OC [(total (tOC), ucOC, percent uncarboxylated (%ucOC)], and procollagen type 1N-terminal propeptide (P1NP; a measure of bone formation) were measured. Women lost an average of 10.9 ± 3.9 kg and 4 %BF. Serum concentrations of tOC, ucOC, %ucOC, and P1NP did not significantly change over the twenty-week intervention, nor were these measures associated with changes in weight (all p > 0.27) or %BF (all p > 0.54). Our data do not support an association between any serum measure of OC and weight or %BF loss in post-menopausal women supplemented with nutrients implicated in bone health.

Status and understanding of groundwater quality in the North San Francisco Bay groundwater basins, 2004

USGS Publications Warehouse

Kulongoski, Justin T.; Belitz, Kenneth; Landon, Matthew K.; Farrar, Christopher

2010-01-01

Groundwater quality in the approximately 1,000-square-mile (2,590-square-kilometer) North San Francisco Bay study unit was investigated as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The study unit is located in northern California in Marin, Napa, and Sonoma Counties. The GAMA Priority Basin Project is being conducted by the California State Water Resources Control Board in collaboration with the U.S. Geological Survey (USGS) and the Lawrence Livermore National Laboratory. The GAMA North San Francisco Bay study was designed to provide a spatially unbiased assessment of untreated groundwater quality in the primary aquifer systems. The assessment is based on water-quality and ancillary data collected by the USGS from 89 wells in 2004 and water-quality data from the California Department of Public Health (CDPH) database. The primary aquifer systems (hereinafter referred to as primary aquifers) were defined by the depth interval of the wells listed in the CDPH database for the North San Francisco Bay study unit. The quality of groundwater in shallower or deeper water-bearing zones may differ from that in the primary aquifers; shallower groundwater may be more vulnerable to surficial contamination. The first component of this study, the status of the current quality of the groundwater resource, was assessed by using data from samples analyzed for volatile organic compounds (VOC), pesticides, and naturally occurring inorganic constituents, such as major ions and trace elements. This status assessment is intended to characterize the quality of groundwater resources within the primary aquifers of the North San Francisco Bay study unit, not the treated drinking water delivered to consumers by water purveyors. Relative-concentrations (sample concentration divided by the health- or aesthetic-based benchmark concentration) were used for evaluating groundwater quality for those constituents that have Federal and (or) California benchmarks. A relative-concentration greater than (>) 1.0 indicates a concentration above a benchmark, and less than or equal to (=) 1.0 indicates a concentration equal to or below a benchmark. Relative-concentrations of organic and special interest constituents were classified as ?high? (relative-concentration > 1.0), ?moderate? (0.1 1.0), ?moderate? (0.5 < relative-concentration = 1.0), or ?low? (relative-concentration = 0.5). Aquifer-scale proportion was used as a metric for evaluating regional-scale groundwater quality. High aquifer-scale proportion is defined as the percentage of the primary aquifers that have a relative-concentration greater than 1.0; proportion is calculated on an areal rather than a volumetric basis. Moderate and low aquifer-scale proportions were defined as the percentage of the primary aquifers that have moderate and low relative-concentrations, respectively. Two statistical approaches-grid-based and spatially-weighted-were used to evaluate aquifer-scale proportion for individual constituents and classes of constituents. Grid-based and spatially-weighted estimates were comparable in the North San Francisco Bay study unit (90-percent confidence intervals). For inorganic constituents with human-health benchmarks, relative-concentrations were high in 14.0 percent of the primary aquifers, moderate in 35.8 percent, and low in 50.2 percent. The high aquifer-scale proportion of inorganic constituents primarily reflected high aquifer-scale proportions of arsenic (10.0 percent), boron (4.1 percent), and lead (1.6 percent). In contrast, relative-concentrations of organic constituents (one or more) were high in 1.4 percent, moderate in 4.9 percent, and low in 93.7 percent (not detected in 64.8 percent) of the primary aquifers. The high aquifer-scale proport

Interest in healthy diet and physical activity interventions peripartum among female partners of active duty military.

PubMed

Ostbye, Truls; McBride, Colleen; Demark-Wahnefried, Wendy; Bastian, Lori; Morey, Miriam; Krause, Katrina M; Brouwer, Rebecca; Turner, Barbara

2003-04-01

Overweight and obesity among soldiers and their dependents have increased over the last decade, mirroring rates in the general population. In general, few programs that result in sustained weight loss have been evaluated, although effective interventions could have clear health and cost benefits for the military. For women, the postpartum period represents a "teachable moment" to promote healthy diet and exercise behaviors related to weight loss, but the attitudes and preferences for weight-loss interventions in this population are unknown. With a view to developing a weight-loss intervention tailored to this population, we surveyed 161 peripartum women at a military base to assess their interests and preferences. Eighty-six percent were dependents. Despite their youth, more than one-third reported entering pregnancy overweight or obese. Interest was high for interventions that promote physical activity and facilitate social interaction. Based on these results, a postpartum exercise intervention is being designed for female partners of active duty soldiers.

Do South Indian newborn babies have higher fat percentage for a given birth weight?

PubMed

Kv, Radha Krishna; Hemalatha, Rajkumar; Mamidi, Raja Sriswan; Jj, Babu Geddam; Balakrishna, N

2016-05-01

India is experiencing rapidly escalating epidemics of diabetes and cardiovascular disease. High fat percent in Indian adults may have its origins at birth (Fetal origin hypothesis). Conflicting evidence from India have shown increased or similar fat mass in Indian newborn babies compared to western countries. To compare body composition of term infants with data from similar studies in India and developed countries. Cross-sectional study in newborn infants at the antenatal ward of a tertiary care hospital in South India. 626 mothers and their newborn babies. Maternal body weight and height, baby weight, length, head circumference, skin folds at three sites. Body fat, arm muscle area and arm muscle index were calculated based on known methods. Mean (SD) birth weight of newborn babies was 2.80 (0.37) kg and 43% of them were small for gestational age. Birth weight was significantly related to subscapular (r=0.445; p<0.001) and triceps (r=0.567; p<0.001) skin fold thickness. Mean (CI) Subscapular skin fold thickness and total body fat % was 3.81mm (3.74-3.97) and 10.5% (10.2-10.8). Mean total body fat % for small for gestational age (SGA) (9.57%) was significantly lower than appropriate for gestational age (AGA) babies (11.7%). The mean body fat percent in AGA infants was similar to that of studies reported on term infants of developed countries, suggesting that South Indian babies may accumulate similar fat mass with increasing birth weight and gestational age. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Overvaluation of shape and weight in adolescents with anorexia nervosa: does shape concern or weight concern matter more for treatment outcome?

PubMed

Byrne, Catherine E; Kass, Andrea E; Accurso, Erin C; Fischer, Sarah; O'Brien, Setareh; Goodyear, Alexandria; Lock, James; Le Grange, Daniel

2015-01-01

Overvaluation of shape and weight is a key diagnostic feature of anorexia nervosa (AN); however, limited research has evaluated the clinical utility of differentiating between weight versus shape concerns. Understanding differences in these constructs may have important implications for AN treatment given the focus on weight regain. This study examined differences in treatment outcome between individuals whose primary concern was weight versus those whose primary concern was shape in a randomized controlled trial of treatment for adolescent AN. Data were drawn from a two-site randomized controlled trial that compared family-based treatment and adolescent focused therapy for AN. Chi-square tests and logistic regression analyses were conducted. Thirty percent of participants presented with primary weight concern (n = 36; defined as endorsing higher Eating Disorder Examination (EDE) Weight Concern than Shape Concern subscale scores); 60 % presented with primary shape concern (n = 72; defined as endorsing higher EDE Shape Concern than Weight Concern scores). There were no significant differences between the two groups in remission status at the end of treatment. Treatment did not moderate the effect of group status on achieving remission. Results suggest that treatment outcomes are comparable between adolescents who enter treatment for AN with greater weight concerns and those who enter treatment with greater shape concerns. Therefore, treatment need not be adjusted based on primary weight or primary shape concerns.

Policy Actions to Address Weight-Based Bullying and Eating Disorders in Schools: Views of Teachers and School Administrators.

PubMed

Puhl, Rebecca M; Neumark-Sztainer, Dianne; Bryn Austin, S; Suh, Young; Wakefield, Dorothy B

2016-07-01

Weight-related bullying is prevalent among youth and associated with adverse health consequences, including increased risk for body dissatisfaction and disordered eating behaviors, which are risk factors for eating disorders. Although concerns about these problems have stimulated calls for broader intervention efforts in schools, actions thus far have been limited. This study examined educators' perspectives about potential policy actions to address these issues in schools. Educators (N = 240) completed an online questionnaire assessing their support for 11 potential school-based policy actions to address weight-related bullying and eating disorders. Participants also rated policies according to their feasibility and potential for positive impact. Forty-eight percent of participants observed weight-related bullying in their school and 99% expressed the importance of intervening in such incidents. A large majority (75%-94%) supported 8 of the 11 policies, especially actions requiring school-based health curriculum to include content on eating disorder prevention (94%), and addressing weight-bullying through antibullying policies (92%), staff training (89%), and school curriculum (89%). Strongly supported policies were viewed by participants as being the most impactful and feasible to implement. Educators recognize weight-related bullying and eating disorders as problems in their schools that warrant improved prevention and intervention efforts at the policy level. © 2016, American School Health Association.

Application of a weighted-averaging method for determining paleosalinity: a tool for restoration of south Florida's estuaries

USGS Publications Warehouse

Wingard, G.L.; Hudley, J.W.

2012-01-01

A molluscan analogue dataset is presented in conjunction with a weighted-averaging technique as a tool for estimating past salinity patterns in south Florida’s estuaries and developing targets for restoration based on these reconstructions. The method, here referred to as cumulative weighted percent (CWP), was tested using modern surficial samples collected in Florida Bay from sites located near fixed water monitoring stations that record salinity. The results were calibrated using species weighting factors derived from examining species occurrence patterns. A comparison of the resulting calibrated species-weighted CWP (SW-CWP) to the observed salinity at the water monitoring stations averaged over a 3-year time period indicates, on average, the SW-CWP comes within less than two salinity units of estimating the observed salinity. The SW-CWP reconstructions were conducted on a core from near the mouth of Taylor Slough to illustrate the application of the method.

Maraging superalloys and heat treatment processes

DOEpatents

Korenko, Michael K.; Gelles, David S.; Thomas, Larry E.

1986-01-01

Described herein are nickel-chromium-iron maraging, gamma prime strengthened superalloys containing about 18 to 25 weight percent nickel, about 4 to 8 weight percent chromium, gamma prime forming elements such as aluminum and/or titanium, and a solid solution strengthening element, such as molybdenum. After heat treatment, which includes at least one ausaging treatment and at least one maraging treatment, a microstructure containing gamma prime phase and decomposed Fe-Ni-Cr type martensite is produced.

Tungsten-nickel-cobalt alloy and method of producing same

DOEpatents

Dickinson, James M.; Riley, Robert E.

1977-03-15

An improved tungsten alloy having a tungsten content of approximately 95 weight percent, a nickel content of about 3 weight percent, and the balance being cobalt of about 2 weight percent is described. A method for producing said tungsten-nickel-cobalt alloy is further described and comprises (a) coating the tungsten particles with a nickel-cobalt alloy, (b) pressing the coated particles into a compact shape, (c) heating said compact in hydrogen to a temperature in the range of 1400.degree. C and holding at this elevated temperature for a period of about 2 hours, (d) increasing this elevated temperature to about 1500.degree. C and holding for 1 hour at this temperature, (e) cooling to about 1200.degree. C and replacing the hydrogen atmosphere with an inert argon atmosphere while maintaining this elevated temperature for a period of about 1/2 hour, and (f) cooling the resulting alloy to room temperature in this argon atmosphere.

A 6‐month telephone‐based weight loss intervention in overweight and obese subjects with idiopathic intracranial hypertension

PubMed Central

Kovacs, Betty; Miller, Neil; McDermott, Michael P.; Wall, Michael; Kupersmith, Mark; Pi‐Sunyer, F. Xavier

2016-01-01

Summary Objectives The purpose of this paper is to measure the change in body weight after a 6‐month telephone‐based weight loss intervention in overweight and obese subjects with idiopathic intracranial hypertension (IIH) and mild visual loss randomized to receive either acetazolamide or placebo. Methods One hundred sixty‐five subjects with IIH, aged 29.1 ± 7.5 (mean ± SD) and BMI 39.9 + 8.3 kg/m2, enrolled at 38 academic and private practice sites in North America, participated in this trial. This was a randomized, double‐masked, placebo‐controlled trial of acetazolamide in subjects with IIH and mild visual loss. All participants received a reduced‐sodium, weight‐reduction diet and a 6‐month telephone‐based weight loss intervention. Six‐month changes from baseline in body weight, perimetric mean deviation as assessed by automated perimetry and quality of life using the National Eye Institute Visual Function Questionnaire 25 and the 36‐item Short Form Health Survey were measured. Results Mean percent weight change at 6 months was −5.9% ± 6.7% of initial body weight overall, −3.5% ± 5.9% in the placebo group and −7.8% ± 6.8% in the acetazolamide group. Weight change was not associated with changes in either mean deviation or quality of life scores. Conclusion Patients with IIH and mild visual loss assigned to either acetazolamide or placebo, all of whom received a 6‐month telephone‐based weight loss intervention, lost an average of 5.9% of initial body weight, consistent with NHLBI guidelines of 5% to 10% of body weight loss for clinically significant health benefit. PMID:29071096

Mapping Urban Risk: Flood Hazards, Race, & Environmental Justice In New York”

PubMed Central

Maantay, Juliana; Maroko, Andrew

2009-01-01

This paper demonstrates the importance of disaggregating population data aggregated by census tracts or other units, for more realistic population distribution/location. A newly-developed mapping method, the Cadastral-based Expert Dasymetric System (CEDS), calculates population in hyper-heterogeneous urban areas better than traditional mapping techniques. A case study estimating population potentially impacted by flood hazard in New York City compares the impacted population determined by CEDS with that derived by centroid-containment method and filtered areal weighting interpolation. Compared to CEDS, 37 percent and 72 percent fewer people are estimated to be at risk from floods city-wide, using conventional areal weighting of census data, and centroid-containment selection, respectively. Undercounting of impacted population could have serious implications for emergency management and disaster planning. Ethnic/racial populations are also spatially disaggregated to determine any environmental justice impacts with flood risk. Minorities are disproportionately undercounted using traditional methods. Underestimating more vulnerable sub-populations impairs preparedness and relief efforts. PMID:20047020

Efficient harvesting of marine Chlorella vulgaris microalgae utilizing cationic starch nanoparticles by response surface methodology.

PubMed

Bayat Tork, Mahya; Khalilzadeh, Rasoul; Kouchakzadeh, Hasan

2017-11-01

Harvesting involves nearly thirty percent of total production cost of microalgae that needs to be done efficiently. Utilizing inexpensive and highly available biopolymer-based flocculants can be a solution for reducing the harvest costs. Herein, flocculation process of Chlorella vulgaris microalgae using cationic starch nanoparticles (CSNPs) was evaluated and optimized through the response surface methodology (RSM). pH, microalgae and CSNPs concentrations were considered as the main independent variables. Under the optimum conditions of microalgae concentration 0.75gdry weight/L, CSNPs concentration 7.1mgdry weight/L and pH 11.8, the maximum flocculation efficiency (90%) achieved. Twenty percent increase in flocculation efficiency observed with the use of CSNPs instead of the non-particulate starch which can be due to the more electrostatic interactions between the cationic nanoparticles and the microalgae. Therefore, the synthesized CSNPs can be employed as a convenient and economical flocculants for efficient harvest of Chlorella vulgaris microalgae at large scale. Copyright © 2017 Elsevier Ltd. All rights reserved.

12 CFR 217.37 - Collateralized transactions.

Code of Federal Regulations, 2014 CFR

2014-01-01

.... Notwithstanding paragraph (b)(2)(i) of this section: (i) A Board-regulated institution may assign a zero percent... the extent that the contract is collateralized by an exposure to a sovereign that qualifies for a zero percent risk weight under § 217.32. (iii) A Board-regulated institution may assign a zero percent risk...

Evaluation of a long-endurance-surveillance remotely-piloted vehicle with and without laminar flow control

NASA Technical Reports Server (NTRS)

Turriziani, R. V.; Lovell, W. A.; Price, J. E.; Quartero, C. B.; Washburn, S. F.

1979-01-01

Two aircraft were evaluated, using a derated TF34-GE-100 turbofan engine one with laminar flow control (LFC) and one without. The mission of the remotely piloted vehicles (RPV) is one of high-altitude loiter at maximum endurance. With the LFC system maximum mission time increased by 6.7 percent, L/D in the loiter phase improved 14.2 percent, and the minimum parasite drag of the wing was reduced by 65 percent resulting in a 37 percent reduction for the total airplane. Except for the minimum parasite drag of the wing, the preceding benefits include the offsetting effects of weight increase, suction power requirements, and drag of the wing-mounted suction pods. In a supplementary study using a scaled-down, rather than derated, version of the engine, on the LFC configuration, a 17.6 percent increase in mission time over the airplane without LFC and an incremental time increase of 10.2 percent over the LFC airplane with derated engine were attained. This improvement was due principally to reductions in both weight and drag of the scaled engine.

Multi-functional layered structure having structural and radiation shielding attributes

NASA Technical Reports Server (NTRS)

Kaul, Raj K. (Inventor); Barghouty, Abdulnasser Fakhri (Inventor); Penn, Benjamin G. (Inventor); Hulcher, Anthony Bruce (Inventor)

2010-01-01

A cosmic and solar radiation shielding structure that also has structural attributes is comprised of three layers. The first layer is 30-42 percent by volume of ultra-high molecular weight (UHMW) polyethylene fibers, 18-30 percent by volume of graphite fibers, and a remaining percent by volume of an epoxy resin matrix. The second layer is approximately 68 percent by volume of UHMW polyethylene fibers and a remaining percent by volume of a polyethylene matrix. The third layer is a ceramic material.

Kids Count Data Book, 2003: State Profiles of Child Well-Being.

ERIC Educational Resources Information Center

O'Hare, William P.

This Kids Count data book examines national and statewide trends in the well being of the nation's children. Statistical portraits are based on 10 indicators of well being: (1) percent of low birth weight babies; (2) infant mortality rate; (3) child death rate; (4) rate of teen deaths by accident, homicide, and suicide; (5) teen birth rate; (6)…

KIDS COUNT Data Book, 2002: State Profiles of Child Well-Being.

ERIC Educational Resources Information Center

O'Hare, William P.

This KIDS COUNT data book examines national and statewide trends in the well being of the nations children. Statistical portraits are based on 10 indicators of well being: (1) percent of low birth weight babies; (2) infant mortality rate; (3) child death rate; (4) rate of teen deaths by accident, homicide, and suicide; (5) teen birth rate; (6)…

KIDS COUNT Data Book, 2001: State Profiles of Child Well-Being.

ERIC Educational Resources Information Center

Annie E. Casey Foundation, Baltimore, MD.

This Kids Count report examines national and statewide trends in the well-being of the nation's children. The statistical portrait is based on 10 indicators of well being: (1) percent of low birth weight babies; (2) infant mortality rate; (3) child death rate; (4) rate of teen deaths by accident, homicide and suicide; (5) teen birth rate; (6)…

School Enrollment in Iraq during the U.S-Led Invasion: A Statistical Analysis

ERIC Educational Resources Information Center

Shafiq, M. Najeeb

2012-01-01

Little is known about the educational consequences in Iraq during the U.S.-led invasion of 2003-2010. This study examines school enrollment based on the 2007 Iraq Household Socio-Economic Survey. There are three main findings. First, a population-weighted analysis indicates that the school enrollment rate (72.3 percent) is lower than past Iraqi…

Thermal fatigue-and-oxidation-resistant alloy

NASA Technical Reports Server (NTRS)

Bizon, P. T.; Waters, W. J.; Spera, D. A.

1976-01-01

Cast nickel-base alloy designated as NASA TAZ-8A has been developed for use in high temperature aircraft engine components. TAZ-8A composition is 8Ta, 6Cr, 6A1, 4Mo, 4W, 2Cb, 0.5Zr, 0.125C, 0.004B, and balance Ni (weight percent). Its specific gravity at room temperature is 8.65.

Determinants of Dieting Behavior and Eating Disorders in High School Students.

NASA Astrophysics Data System (ADS)

Emmons, Lillian Miller

This study examines the prevalence and intensity of dieting behavior and the development of eating disorders in a sample of 1269 high school students from ten schools in the Greater Cleveland area. The sample includes four race-sex groups: black and white male and female students. Differences in dieting behavior between these groups are examined and, within each race-sex group, dieters and non-dieters are compared to see whether they differ in such factors as current weight and personal weight history, parental weights, socioeconomic class, religion, birth order, exercise and personality factors such as self-esteem and eating disorder measures. Data were collected using both self-administered questionnaires and in-depth interviews with a subsample of students. The study documents a higher prevalence of dieting and purging behavior than has been reported in other research. Forty-one percent of both black and white males, 61 percent of black females, and 77 percent of white females dieted and many purged, particularly black females who tended to use laxatives and diuretics and white females and males who tended to use vomiting. Dieters and non -dieters differed significantly in past experience with being overweight and in their current weights. At the time of the study 20 to 30 percent of the dieters were classifiable as overweight. While black and white male dieters and non-dieters were in agreement about ideal body weight, white female dieters and non-dieters wanted considerably lower weights than black female dieters and non-dieters. Ethnicity, as determined by socioeconomic class and religion, was not significantly related to dieting behavior, nor was birth order, a familial factor. It appeared that pervasive cultural pressures to attain an ideal figure affected all race-sex groups and led large percentages of the students to diet, even many who were already underweight.

African American Women, Hair Care, and Health Barriers

PubMed Central

Mahan, Meredith Grace

2014-01-01

Objectives: The objective of this study was to elucidate the prevalence of hair loss among African American women; explore the psychosocial impact of hair grooming difficulties; and examine both perceptions related to physician encounters in this group and the relationship between hair grooming, physical activity, and weight maintenance. Design: An anonymous retrospective and qualitative survey, the Hair Care Assessment Survey, is an 18-question novel survey instrument designed at the Henry Ford Hospital Department of Dermatology Multicultural Dermatology Center. Setting: The Hair Care Assessment Survey was distributed at church-related functions at predominantly African American metropolitan Detroit churches. Participants: Two hundred African American women from metropolitan Detroit, Michigan, aged 21 to 83. Measurements: The Hair Care Assessment Survey collected data relating to hair loss and hair care, psychosocial experiences relating to hair loss, and hair care as it relates to exercise and body weight management. Data was collected on doctor-patient hair-related medical visits and experiences with commercially available ethnic hair care products. Results: More than 50 percent reported excessive hair loss. Twenty-eight percent had visited a physician to discuss hair issues, but only 32 percent felt their physician understood African American hair. Forty-five percent reported avoiding exercise because of hair concerns, and 22 percent felt that their hair impeded maintaining healthy body weight. Conclusion: Hair loss affects a compelling number of African American women, and a significant number express dissatisfaction in hair-related physician encounters. Additionally, hair styling problems present a serious impediment to physical activity and weight management among this already high-risk population. PMID:25276273

21 CFR 146.114 - Lemon juice.

Code of Federal Regulations, 2013 CFR

2013-04-01

... acidity, calculated as anhydrous citric acid, does not exceed 15 percent of the acidity of the finished... less than 4.5 percent, by weight, calculated as anhydrous citrus acid. Copies of the incorporation by...

21 CFR 146.114 - Lemon juice.

Code of Federal Regulations, 2014 CFR

2014-04-01

... acidity, calculated as anhydrous citric acid, does not exceed 15 percent of the acidity of the finished... less than 4.5 percent, by weight, calculated as anhydrous citrus acid. Copies of the incorporation by...

21 CFR 146.114 - Lemon juice.

Code of Federal Regulations, 2012 CFR

2012-04-01

... acidity, calculated as anhydrous citric acid, does not exceed 15 percent of the acidity of the finished... less than 4.5 percent, by weight, calculated as anhydrous citrus acid. Copies of the incorporation by...

Weight-related teasing and internalized weight stigma predict abnormal eating attitudes and behaviours in Emirati female university students.

PubMed

O'Hara, Lily; Tahboub-Schulte, Sabrina; Thomas, Justin

2016-07-01

This cross-sectional study examined the relationship between abnormal eating attitudes, weight teasing, internalized weight stigma and self-esteem in the United Arab Emirates in a sample of 420 female Emirati undergraduate students (mean age = 23.12 years). Participants completed an online survey including validated and reliable measures. Regression and mediation analyses were used to test for relationships between the factors. Thirty percent of respondents had eating disorder symptomatology, and 44% of respondents reported being frequently teased about their weight. Eating disorder symptomatology was positively correlated with being bothered by teasing from family, friends and others, and internalized weight stigma. Weight- and body-related shame and guilt was the strongest predictor of eating disorder symptomatology. Public health authorities should consider these issues as priorities for action in order to improve the health and wellbeing of young women in the UAE. In addition, it is vital that public health and medical services do not inadvertently condone weight-based teasing or enhance weight stigma and shame. Copyright © 2016 Elsevier Ltd. All rights reserved.

Use of zinc and copper (I) salts to reduce sulfur and nitrogen impurities during the pyrolysis of plastic and rubber waste to hydrocarbons

DOEpatents

Wingfield, Jr., Robert C.; Braslaw, Jacob; Gealer, Roy L.

1984-01-01

An improvement in a process for the pyrolytic conversion of rubber and plastic waste to hydrocarbon products which results in reduced levels of nitrogen and sulfur impurities in these products. The improvement comprises pyrolyzing the waste in the presence of at least about 1 weight percent of salts, based on the weight of the waste, preferably chloride or carbonate salts, of zinc or copper (I). This invention was made under contract with or subcontract thereunder of the Department of Energy Contract #DE-AC02-78-ER10049.

Adjusting Permittivity by Blending Varying Ratios of SWNTs

NASA Technical Reports Server (NTRS)

Tour, James M.; Stephenson, Jason J.; Higginbotham, Amanda

2012-01-01

A new composite material of singlewalled carbon nanotubes (SWNTs) displays radio frequency (0 to 1 GHz) permittivity properties that can be adjusted based upon the nanotube composition. When varying ratios of raw to functionalized SWNTs are blended into the silicone elastomer matrix at a total loading of 0.5 percent by weight, a target real permittivity value can be obtained between 70 and 3. This has particular use for designing materials for microwave lenses, microstrips, filters, resonators, high-strength/low-weight electromagnetic interference (EMI) shielding, antennas, waveguides, and low-loss magneto-dielectric products for applications like radome construction.

Polyimide molding powder, coating, adhesive, and matrix resin

NASA Technical Reports Server (NTRS)

St.clair, Terry L. (Inventor); Progar, Donald J. (Inventor)

1992-01-01

The invention is a polyimide prepared from 3,4'-oxydianiline (3,4'-ODA) and 4,4'-oxydiphthalic anhydride (ODPA), in 2-methoxyethyl ether (diglyme). The polymer was prepared in ultra high molecular weight and in a controlled molecular weight form which has a 2.5 percent offset in stoichiometry (excess diamine) with a 5.0 percent level of phthalic anhydride as an endcap. This controlled molecular weight form allows for greatly improved processing of the polymer for moldings, adhesive bonding, and composite fabrication. The higher molecular weight version affords tougher films and coatings. The overall polymer structure groups in the dianhydride, the diamine, and a metal linkage in the diamine affords adequate flow properties for making this polymer useful as a molding powder, adhesive, and matrix resin.

Status of groundwater quality in the Santa Barbara Study Unit, 2011: California GAMA Priority Basin Project

USGS Publications Warehouse

Davis, Tracy A.; Kulongoski, Justin T.

2016-10-03

Groundwater quality in the 48-square-mile Santa Barbara study unit was investigated in 2011 as part of the California State Water Resources Control Board’s Groundwater Ambient Monitoring and Assessment (GAMA) Program Priority Basin Project. The study unit is mostly in Santa Barbara County and is in the Transverse and Selected Peninsular Ranges hydrogeologic province. The GAMA Priority Basin Project is carried out by the U.S. Geological Survey in collaboration with the California State Water Resources Control Board and Lawrence Livermore National Laboratory.The GAMA Priority Basin Project was designed to provide a statistically unbiased, spatially distributed assessment of the quality of untreated groundwater in the primary aquifer system of California. The primary aquifer system is defined as that part of the aquifer corresponding to the perforation interval of wells listed in the California Department of Public Health database for the Santa Barbara study unit. This status assessment is intended to characterize the quality of groundwater resources in the primary aquifer system of the Santa Barbara study unit, not the treated drinking water delivered to consumers by water purveyors.The status assessment for the Santa Barbara study unit was based on water-quality and ancillary data collected in 2011 by the U.S. Geological Survey from 23 sites and on water-quality data from the California Department of Public Health database for January 24, 2008–January 23, 2011. The data used for the assessment included volatile organic compounds; pesticides; pharmaceutical compounds; two constituents of special interest, perchlorate and N-nitrosodimethylamine (NDMA); and naturally present inorganic constituents, such as major ions and trace elements. Relative-concentrations (sample concentration divided by the health- or aesthetic-based benchmark concentration) were used to evaluate groundwater quality for those constituents that have federal or California regulatory and non-regulatory benchmarks for drinking-water quality. For inorganic, organic, and special-interest constituents, a relative-concentration greater than 1.0 indicates a concentration greater than the benchmark and is classified as high. Inorganic constituents are classified as moderate if relative-concentrations are greater than 0.5 and less than or equal to 1.0 and are classified as low if relative-concentrations are less than or equal to 0.5. For organic and special-interest constituents, the boundary between moderate and low relative-concentrations was set at 0.1.Aquifer-scale proportion was used as the primary metric for evaluating regional-scale groundwater quality. High aquifer-scale proportion is defined as the areal percentage of the primary aquifer system with a relative-concentration greater than 1.0 for a particular constituent or class of constituents. Moderate and low aquifer-scale proportions were defined as the areal percentage of the primary aquifer system that had moderate and low relative-concentrations, respectively. Two statistical approaches—grid based and spatially weighted—were used to calculate aquifer-scale proportions for individual constituents and constituent classes. Grid-based and spatially weighted estimates were comparable in this the study (within 90-percent confidence intervals). Grid-based results were selected for use in the status assessment unless, as was observed in a few cases, a grid-based result was zero and the spatially weighted result was not zero, in which case, the spatially weighted result was used.Inorganic constituents that have human-health benchmarks were present at high relative-concentrations in 5.3 percent of the primary aquifer system and at moderate concentrations in 32 percent. High aquifer-scale proportions of inorganic constituents primarily were a result of high aquifer-scale proportions of boron (5.3 percent) and fluoride (5.3 percent). Inorganic constituents that have aesthetic-based benchmarks, referred to as secondary maximum contaminant levels, were present at high relative-concentrations in 58 percent of the primary aquifer system and at moderate concentrations in 37 percent. Iron, manganese, sulfate, and total dissolved solids were the inorganic constituents with secondary maximum contaminant levels present at high relative-concentrations.In contrast, organic and special-interest constituents that have health-based benchmarks were not detected at high relative-concentrations in the primary aquifer system. Of the 218 organic constituents analyzed, 10 were detected—9 that had human-health benchmarks. Organic constituents were present at moderate relative-concentrations in 11 percent of the primary aquifer system. The moderate aquifer-scale proportions were a result of moderate relative-concentrations of the volatile organic compounds methyl tert-butyl ether (MTBE, 11 percent) and 1,2-dichloroethane (5.6 percent). The volatile organic compounds 1,1,1-trichloroethane, 1,1-dichloroethane, bromodichloromethane, chloroform, MTBE, and perchloroethene (PCE); the pesticide simazine; and the special-interest constituent perchlorate were detected at more than 10 percent of the sites in the Santa Barbara study unit. Perchlorate was present at moderate relative-concentrations in 50 percent of the primary aquifer system. Pharmaceutical compounds and NDMA were not detected in the Santa Barbara study unit.

Weight loss and retention in a commercial weight-loss program and the effect of corporate partnership.

PubMed

Martin, C K; Talamini, L; Johnson, A; Hymel, A M; Khavjou, O

2010-04-01

No studies report whether improvements to commercial weight-loss programs affect retention and weight loss. Similarly, no studies report whether enrolling in a program through work (with a corporate partner) affects retention and weight loss. To determine whether: (1) adding evidence-based improvements to a commercial weight-loss program increased retention and weight loss, (2) enrolling in a program through work increased retention and weight loss and (3) whether increased weight loss was because of longer retention. Data were collected on 60 164 adults who enrolled in Jenny Craig's Platinum Program over 1 year in 2001-2002. The program was subsequently renamed the Rewards Program and improved by increasing treatment personalization and including motivational interviewing. Data were then collected on 81 505 participants of the Rewards Program who enrolled during 2005 (2418 of these participants enrolled through their employer, but paid out-of-pocket). Retention (participants were considered active until >or=42 consecutive days were missed) and weight loss (percent of original body weight) from baseline to the last visit (data were evaluated through week 52) were determined. Alpha was set at 0.001. Mean (95% confidence interval (CI)) retention (weeks) was significantly higher among Rewards (19.5 (19.4-19.6)) compared with Platinum (16.3 (16.2-16.4)) participants, and Rewards Corporate (25.9 (25.0-26.8)) compared with Noncorporate (21.9 (21.7-22.1)) participants. Modified intent-to-treat analyses indicated that mean (95% CI) percent weight loss was significantly larger among Rewards (6.36 (6.32-6.40)) compared with Platinum (5.45 (5.41-5.49)) participants, and Rewards Corporate (7.16 (6.92-7.40)) compared with Noncorporate (6.20 (6.16-6.24)) participants, with and without adjustment for baseline participant characteristics. In all cases, greater weight loss was secondary to longer retention. The study was not a randomized controlled trial, rather, a translational effectiveness study. Improvements to a commercial program and enrolling through a corporate partner are associated with greater weight loss that is because of improved retention.

Ductile metal alloys, method for making ductile metal alloys

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cockeram, Brian V.

A ductile alloy is provided comprising molybdenum, chromium and aluminum, wherein the alloy has a ductile to brittle transition temperature of about 300 C after radiation exposure. The invention also provides a method for producing a ductile alloy, the method comprising purifying a base metal defining a lattice; and combining the base metal with chromium and aluminum, whereas the weight percent of chromium is sufficient to provide solute sites within the lattice for point defect annihilation.

A 1 MW, 100 kV, less than 100 kg space based dc-dc power converter

NASA Technical Reports Server (NTRS)

Cooper, J. R.; White, C. W.

1991-01-01

A 1 MW dc-dc power converter has been designed which has an input voltage of 5 kV +/-3 percent, an output voltage of 100 kV +/- 0.25 percent, and a run time of 1000 s at full power. The estimated system mass is 83.8 kg, giving a power density of 11.9 kW/kg. The system exceeded the weight goal of 10 kW/kg through the use of innovative components and system concepts. The system volume is approximately 0.1 cu m, and the overall system efficiency is estimated to be 87 percent. Some of the unique system features include a 50-kHz H-bridge inverter using MOS-controlled thyristors as the switching devices, a resonance transformer to step up the voltage, open-cycle cryogenic hydrogen gas cooling, and a nonrigid, inflatable housing which provides on-demand pressurization of the power converter local environment. This system scales very well to higher output powers. The weight of the 10-MW system with the same input and output voltage requirements and overall system configuration is estimated to be 575.3 kg. This gives a power density of 17.4 kW/kg, significantly higher than the 11.9 kW/kg estimated at 1 MW.

A 1 MW, 100 kV, less than 100 kg space based dc-dc power converter

NASA Astrophysics Data System (ADS)

Cooper, J. R.; White, C. W.

A 1 MW dc-dc power converter has been designed which has an input voltage of 5 kV +/-3 percent, an output voltage of 100 kV +/- 0.25 percent, and a run time of 1000 s at full power. The estimated system mass is 83.8 kg, giving a power density of 11.9 kW/kg. The system exceeded the weight goal of 10 kW/kg through the use of innovative components and system concepts. The system volume is approximately 0.1 cu m, and the overall system efficiency is estimated to be 87 percent. Some of the unique system features include a 50-kHz H-bridge inverter using MOS-controlled thyristors as the switching devices, a resonance transformer to step up the voltage, open-cycle cryogenic hydrogen gas cooling, and a nonrigid, inflatable housing which provides on-demand pressurization of the power converter local environment. This system scales very well to higher output powers. The weight of the 10-MW system with the same input and output voltage requirements and overall system configuration is estimated to be 575.3 kg. This gives a power density of 17.4 kW/kg, significantly higher than the 11.9 kW/kg estimated at 1 MW.

Performance of a 1380-foot-per-second-tip-speed axial-flow compressor rotor with a blade tip solidity of 1.3

NASA Technical Reports Server (NTRS)

Hager, R. D.; Janetzke, D. C.; Reid, L.

1972-01-01

Aerodynamic design parameters are presented along the overall and blade element performance, of an axial flow compressor rotor designed to study the effects of blade solidity on efficiency and stall margin. At design speed the peak efficiency was 0.844 and occurred at an equivalent weight flow of 63.5 lb/sec with a total pressure ratio of 1.801. Design efficiency, pressure ratio, and weight flow 0.814, 1.65, and 65.3(41.1 lb/sec/sq ft of annulus area), respectively. Stall margin for design speed was 6.4 percent based on the weight flow and pressure ratio values at peak efficiency and just prior to stall.

Aqueous solution dispersement of carbon nanotubes

NASA Technical Reports Server (NTRS)

Kim, Jae-Woo (Inventor); Park, Cheol (Inventor); Choi, Sang H. (Inventor); Lillehei, Peter T. (Inventor); Harrison, Joycelyn S. (Inventor)

2011-01-01

Carbon nanotubes (CNTs) are dispersed in an aqueous buffer solution consisting of at least 50 weight percent water and a remainder weight percent that includes a buffer material. The buffer material has a molecular structure defined by a first end, a second end, and a middle disposed between the first and second ends. The first end is a cyclic ring with nitrogen and oxygen heteroatomes, the middle is a hydrophobic alkyl chain, and the second end is a charged group.

Modification of fast-growing Chinese Fir wood with unsaturated polyester resin: Impregnation technology and efficiency

NASA Astrophysics Data System (ADS)

Ma, Qing; Zhao, Zijian; Yi, Songlin; Wang, Tianlong

In this study, Chinese Fir was impregnated with unsaturated polyester resin to enhance its properties. Samples 20 mm × 20 mm × 20 mm in size were split into different sections with epoxy resin and tinfoil and subjected to an impregnation experiment under various parameters. Vacuum degree was -0.04 MPa, -0.06 MPa or -0.08 MPa and vacuum duration was 15 min, 30 min, or 45 min. The results indicated that impregnation weight percent gain is linearly dependent on curing weight percent gain. Vacuum duration appears to have less influence on the curing weight percent gain than vacuum degree, and impregnation was most successful at the transverse section compared to other sections. The optimal impregnation parameters were 30 min modification under -0.08 MPa vacuum followed by 120 min at atmospheric pressure for samples 200 mm × 100 mm × 20 mm in size. Uneven distribution of weight percent gain and cracking during the curing process suggested that 30 min post-processing at -0.09 MPa vacuum was the most effective way to complete the impregnation process. The sample's bending strength and modulus of elasticity increased after impregnation treatment. Bending strength after impregnation without post-processing reached 112.85%, but reached 71.65% with vacuum-processing; modulus of elasticity improved 67.13% and 58.28% without and with post-processing, respectively.

Dietary fat and weight gain among women in the Nurses' Health Study.

PubMed

Field, Alison E; Willett, Walter C; Lissner, Lauren; Colditz, Graham A

2007-04-01

To assess the association of dietary fat and weight gain among adult women and to investigate whether offspring of overweight parents have a greater predisposition to weight gain due to intake of dietary fat. This was an 8-year follow-up of 41,518 women in the Nurses' Health Study (NHS), a population-based, prospective cohort. The women were 41 to 68 years of age, free of cardiovascular disease, cancer, and diabetes in 1986 when "baseline" weight and diet were assessed. Eight years later (1994), changes in weight and dietary intake were assessed. Linear regression models were used to relate change in weight to fat intake and change in fat intake, using the percentage of energy from carbohydrate as the comparison, adjusted for age, BMI in 1986, leisure time physical activity, time spent sitting, percent of calories from protein, and change in percentage of calories from protein. Overall, there was a weak positive association between total fat intake (beta=0.11) and weight gain. Increases in monosaturated and polyunsaturated fat were not associated with weight gain, but increases in animal fat, saturated fat, and trans fat had a positive association with weight change. There was not strong evidence of effect modification by parental weight status (p=0.7 to 0.8 for percentage of calories from total fat, animal fat, and vegetable fat); however, the associations were stronger among the overweight compared with leaner women (p<0.05 for percentage of calories from each type of fat). Among overweight women, for every one percentage increase in percentage of calories from trans fat, women gained an additional 2.3 lb (95% confidence interval, 1.80 to 2.86). Our results show that, overall, percent of calories from fat has only a weak positive association with weight gain; however, percentage of calories from animal, saturated, and trans fat has stronger associations. There was no clear evidence that the diet-weight gain association was stronger among offspring of overweight parents, but dietary fat was associated with greater weight gain among overweight women.

Single-Trait and Antagonistic Index Selection for Litter Size and Body Weight in Mice

PubMed Central

Eisen, E. J.

1978-01-01

Individual selection based on female performance only was conducted in four lines of mice: L+ for increased litter size, W+ for increased 6-week body weight, L-W+ for a selection index aimed at decreasing litter size and increasing 6-week body weight and L+W- for a selection index aimed at increasing litter size and decreasing 6-week body weight. A fifth line (K) served as an unselected control. All litters were standardized to eight mice at one day of age. Expected heritability was based on twice the regression of offspring on dam (h2d), which contains additive genetic variance due to direct (σ2Ao) and maternal (σ2Am) effects and their covariance (σAoAm). Responses and correlated responses were measured either deviated (method 1) or not deviated (method 2) from the control line. Realized heritabilities (h2R) for litter size were 0.19 ± 0.04 (1) and 0.16 ± 0.03 (2), which were similar to h 2d of 0.17 ± 0.04. The h2 R for 6-week body weight of 0.55 ± 0.07 (1) and 0.44 ± 0.07 (2) agreed with h2d of 0.42 ± 0.02. Realized genetic correlations (r*GR) between litter size and 6-week body weight calculated from the double-selection experiment were 0.52 ± 0.10 (1) and 0.52 ± 0.13 (2), which were not significantly different from the base population estimate of r* Gd = 0.63 ± 0.14. Divergence (L-W + minus L+W-) in the antagonistic index selection lines was 0.21 ± 0.01 index units (I = 0.305 PW - 0.436 PL, where P W and PL are the phenotypic values for 6-week body weight and litter size, respectively.). The h2 R of index units of 0.14 ± 0.02 calculated from divergence agreed with h2d of 0.14 ± 0.04. Divergences in litter size (-0.19 ± 0.07) and 6-week body weight (0.46 ± 0.10) were in the expected direction. Antagonistic index selection yielded about one-half the expected divergence in litter size, while divergence in 6-week body weight was only slightly less than expected. Realized genetic correlations indicated that litter size, 6-week body weight and index units each showed positive pleiotropy with 3-week body weight, postweaning gain and weight at vaginal introitus and negative pleiotropy with age at vaginal introitus. Sex ratio and several components of fitness (days from joining to parturition, percent fertile matings and percent perinatal survival) did not change significantly in the selected lines. PMID:17248819

40 CFR 63.9520 - What procedures must I use to demonstrate initial compliance?

Code of Federal Regulations, 2013 CFR

2013-07-01

... must determine the percent of HAP solvent discharged to the atmosphere for each mix batch according to... to the atmosphere for each mix batch, percent; Srec = Weight of HAP solvent recovered for each mix... discharged to the atmosphere for that mix batch (Pb). (7) Determine the 7-day block average percent of HAP...

40 CFR 63.9520 - What procedures must I use to demonstrate initial compliance?

Code of Federal Regulations, 2011 CFR

2011-07-01

... must determine the percent of HAP solvent discharged to the atmosphere for each mix batch according to... to the atmosphere for each mix batch, percent; Srec = Weight of HAP solvent recovered for each mix... discharged to the atmosphere for that mix batch (Pb). (7) Determine the 7-day block average percent of HAP...

40 CFR 63.9520 - What procedures must I use to demonstrate initial compliance?

Code of Federal Regulations, 2012 CFR

2012-07-01

... must determine the percent of HAP solvent discharged to the atmosphere for each mix batch according to... to the atmosphere for each mix batch, percent; Srec = Weight of HAP solvent recovered for each mix... discharged to the atmosphere for that mix batch (Pb). (7) Determine the 7-day block average percent of HAP...

40 CFR 63.9520 - What procedures must I use to demonstrate initial compliance?

Code of Federal Regulations, 2014 CFR

2014-07-01

... must determine the percent of HAP solvent discharged to the atmosphere for each mix batch according to... to the atmosphere for each mix batch, percent; Srec = Weight of HAP solvent recovered for each mix... discharged to the atmosphere for that mix batch (Pb). (7) Determine the 7-day block average percent of HAP...

Le Monde’s Perception of the U.S.-Soviet Strategic Balance: An Update for 1979-1981.

DTIC Science & Technology

1983-12-01

ICBMs in silos comprised 56 percent of their launchers [ lanceurs ], 75 percent of their warheads [ogives], and 70 percent of their throw-weight. For the... structures , in-place protection of one part of the population (about 20 million inhabitants) is anticipated, and the movement of the rest to less

Status of groundwater quality in the Coastal Los Angeles Basin, 2006-California GAMA Priority Basin Project

USGS Publications Warehouse

Goldrath, Dara; Fram, Miranda S.; Land, Michael; Belitz, Kenneth

2012-01-01

Groundwater quality in the approximately 860-square-mile (2,227-square-kilometer) Coastal Los Angeles Basin study unit (CLAB) was investigated as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The study area is located in southern California in Los Angeles and Orange Counties. The GAMA Priority Basin Project is being conducted by the California State Water Resources Control Board in collaboration with the U.S. Geological Survey (USGS) and the Lawrence Livermore National Laboratory. The GAMA CLAB study was designed to provide a spatially unbiased assessment of the quality of untreated (raw) groundwater in the primary aquifer system. The assessment is based on water-quality and ancillary data collected in 2006 by the USGS from 69 wells and on water-quality data from the California Department of Public Health (CDPH) database. The primary aquifer system was defined by the depth interval of the wells listed in the CDPH database for the CLAB study unit. The quality of groundwater in the primary aquifer system may be different from that in the shallower or deeper water-bearing zones; shallow groundwater may be more vulnerable to surficial contamination. This study assesses the status of the current quality of the groundwater resource by using data from samples analyzed for volatile organic compounds (VOCs), pesticides, and naturally occurring inorganic constituents, such as major ions and trace elements. This status assessment is intended to characterize the quality of groundwater resources in the primary aquifer system of the CLAB study unit, not the treated drinking water delivered to consumers by water purveyors. Relative-concentrations (sample concentration divided by the health- or aesthetic-based benchmark concentration) were used for evaluating groundwater quality for those constituents that have Federal and (or) California regulatory or non-regulatory benchmarks for drinking-water quality. A relative-concentration greater than (>) 1.0 indicates a concentration greater than a benchmark, and a relative-concentration less than or equal to (≤) 1.0 indicates a concentration equal to or less than a benchmark. Relative-concentrations of organic and special-interest constituents [perchlorate, N-nitrosodimethylamine (NDMA), 1,2,3-trichloropropane (1,2,3-TCP), and 1,4-dioxane] were classified as "high" (relative-concentration>1.0), "moderate" (0.5status assessment for evaluating regional-scale groundwater quality. High aquifer-scale proportion is defined as the percentage of the area of the primary aquifer system with a relative-concentration greater than 1.0 for a particular constituent or class of constituents; percentage is based on an areal rather than a volumetric basis. Moderate and low aquifer-scale proportions were defined as the percentage of the primary aquifer system with moderate and low relative-concentrations, respectively. Two statistical approaches-grid-based and spatially weighted-were used to evaluate aquifer-scale proportions for individual constituents and classes of constituents. Grid-based and spatially weighted estimates were comparable in the CLAB study unit (within 90-percent confidence intervals). Inorganic constituents with human-health benchmarks were detected at high relative-concentrations in 5.6 percent of the primary aquifer system and moderate in 26 percent. High aquifer-scale proportion of inorganic constituents primarily reflected high aquifer-scale proportions of arsenic (1.9 percent), nitrate (1.9 percent), and uranium (1.2 percent). Inorganic constituents with secondary maximum contaminant levels (SMCL) were detected at high relative-concentrations in 18 percent of the primary aquifer system and moderate in 47 percent. The constituents present at high relative-concentrations included total dissolved solids (1.9 percent), manganese (15 percent), and iron (9.4 percent). Relative-concentrations of organic constituents (one or more) were high in 3.7 percent, and moderate in 13 percent, of the primary aquifer system. The high aquifer-scale proportion of organic constituents primarily reflected high aquifer-scale proportions of solvents, including trichloroethene (TCE; 1.7 percent), perchloroethene (PCE; 1.1 percent), and carbon tetrachloride (1.0 percent). Of the 204 organic constituents analyzed, 44 constituents were detected. Eleven organic constituents had detection frequencies of greater than 10 percent: the trihalomethanes chloroform and bromodichloromethane, the solvents TCE, PCE, cis-1,2-dichloroethene, and 1,1-dichloroethene, the herbicides atrazine, simazine, prometon, and tebuthiuron, and the gasoline additive methyl tert-butyl ether (MTBE). Most detections were at low relative-concentrations. The special-interest constituent perchlorate was detected at high relative-concentrations in 0.5 percent of the primary aquifer system, and at moderate relative-concentrations in 35 percent. The special-interest constituent 1,4-dioxane was detected at high relative-concentrations, but an insufficient number of samples was analyzed to provide a representative estimate of aquifer-scale proportion.

The status of lightweight photovoltaic space array technology based on amorphous silicon solar cells

NASA Astrophysics Data System (ADS)

Hanak, J. J.; Kaschmitter, J. L.

1991-05-01

An ultralight, flexible photovoltaic (PV) array of amorphous silicon (a-Si) has been identified as a potential low-cost power source for small satellites. We have conducted a survey of the status of the a-Si PV array technology with respect to present and future performance, availability, cost and risks. For existing, experimental array 'blankets' made of commercial cell material, utilizing metal foil substrates, the BOL performance at AM0 and 35 C includes total power up to 200 W, power per area of 64 W/sq m and power per weight of 258 W/kg. Doubling of power per weight occurs when polyimide substrates are used. Estimated EOL power output after 10 years in a nominal low-earth orbit would be 80 percent of BOL, the degradation being due to largely light-induced effects (minus 10 to minus 15 percent) and in part (minus 5 percent) to space radiation. Predictions for the year 1995 for flexible PV arrays, made on the basis of published results for rigid a-Si modules, indicate EOL power output per area and per weight of 105 W/sq m and 400 W/kg, respectively, while predictions for the late 1990s based on existing US national PV program goals indicate EOL values of 157 W/sq m and 600 W/kg. cost estimates by vendors for 200 W ultralight arrays in volume of over 1000 units range from $100/watt to $125/watt. Identified risks include the lack of flexible, space compatible encapsulant, the lack of space qualification effort, recent partial or full acquisitions of US manufacturers of a-Si cells by foreign firms, and the absence of a national commitment for a long-range development program toward developing of this important power source for space. One new US developer has emerged as a future potential supplier of a-Si PV devices on thin, polyimide substrates.

Summary of NASA/DOE Aileron-Control Development Program for Wind Turbines

NASA Technical Reports Server (NTRS)

Miller, D. R.

1986-01-01

The development of aileron-control for wind turbines is discussed. Selected wind tunnel test results and full-scale rotor test results are presented for various types of ailerons. Finally, the current status of aileron-control development is discussed. Aileron-control was considered as a method of rotor control for use on wind turbines based on its potential to reduce rotor weight and cost. Following an initial feasibility study, a 20 percent chord aileron-control rotor was fabricated and tested on the NASA/DOE Mod-0 experimental wind turbine. Results from these tests indicated that the 20 percent chord ailerons regulated power and provided overspeed protection, but only over a very limited windspeed range. The next aileron-control rotor to be tested on the Mod-0 had 38 percent chord ailerons and test results showed these ailerons provided overspeed protection and power regulation over the Mod-0's entire operational windspeed range.

Composite Cathodes for Dual-Rate Li-Ion Batteries

NASA Technical Reports Server (NTRS)

Whitacre, Jay; West, William; Bugga, Ratnakumar

2008-01-01

Composite-material cathodes that enable Li-ion electrochemical cells and batteries to function at both high energy densities and high discharge rates are undergoing development. Until now, using commercially available cathode materials, it has been possible to construct cells that have either capability for high-rate discharge or capability to store energy at average or high density, but not both capabilities. However, both capabilities are needed in robotic, standby-power, and other applications that involve duty cycles that include long-duration, low-power portions and short-duration, high-power portions. The electrochemically active ingredients of the present developmental composite cathode materials are: carbon-coated LiFePO4, which has a specific charge capacity of about 160 mA h/g and has been used as a high-discharge-rate cathode material and Li[Li(0.17)Mn(0.58)Ni(0.25)]O2, which has a specific charge capacity of about 240 mA h/g and has been used as a high-energy-density cathode material. In preparation for fabricating the composite material cathode described, these electrochemically active ingredients are incorporated into two sub-composites: a mixture comprising 10 weight percent of poly(vinylidine fluoride); 10 weight percent of carbon and 80 weight percent of carbon coated LiFePO4; and, a mixture comprising 10 weight percent of PVDF, and 80 weight percent of Li[Li(0.17)Mn(0.58)Ni(0.25)]O2. In the fabrication process, these mixtures are spray-deposited onto an aluminum current collector. Electrochemical tests performed thus far have shown that better charge/discharge performance is obtained when either 1) each mixture is sprayed on a separate area of the current collector or (2) the mixtures are deposited sequentially (in contradistinction to simultaneously) on the same current-collector area so that the resulting composite cathode material consists of two different sub-composite layers.

Does psychosocial stress explain socioeconomic inequities in 9-year weight gain among young women?

PubMed

Ball, Kylie; Schoenaker, Danielle A J M; Mishra, Gita D

2017-06-01

This study investigated the contribution of psychosocial stress to mediating inequities in weight gain by educational status in a large cohort of young Australian women over a 9-year follow-up. This observational cohort study used survey data drawn from 4,806 women, aged 22 to 27 years at baseline (2000), participating in the Australian Longitudinal Study on Women's Health, who reported their education level (2000), perceived stress (2003), and weight (2003 and 2012). Using a causal inference framework based on counterfactuals for mediation analysis, we fitted linear or logistic regression models to examine the total effect, decomposed into natural direct and indirect effects via perceived stress, of education level (highest qualification completed: up to year 12/trade or diploma vs. university) on weight change. Women with lower education gained more weight over 9 years (6.1 kg, standard deviation [SD] 9.5) than women with higher education (3.8 kg, SD 7.7; P < 0.0001) and were more likely to be very or extremely stressed. The higher weight gain associated with low education was not mediated through perceived stress (per SD increase, percent mediated: 1.0%). Education-based inequities in weight gain over time were not attributable to greater psychosocial stress among women with lower education levels. © 2017 The Obesity Society.

External validation and comparison of three pediatric clinical dehydration scales.

PubMed

Jauregui, Joshua; Nelson, Daniel; Choo, Esther; Stearns, Branden; Levine, Adam C; Liebmann, Otto; Shah, Sachita P

2014-01-01

To prospectively validate three popular clinical dehydration scales and overall physician gestalt in children with vomiting or diarrhea relative to the criterion standard of percent weight change with rehydration. We prospectively enrolled a non-consecutive cohort of children ≤ 18 years of age with an acute episode of diarrhea or vomiting. Patient weight, clinical scale variables and physician clinical impression, or gestalt, were recorded before and after fluid resuscitation in the emergency department and upon hospital discharge. The percent weight change from presentation to discharge was used to calculate the degree of dehydration, with a weight change of ≥ 5% considered significant dehydration. Receiver operating characteristics (ROC) curves were constructed for each of the three clinical scales and physician gestalt. Sensitivity and specificity were calculated based on the best cut-points of the ROC curve. We approached 209 patients, and of those, 148 were enrolled and 113 patients had complete data for analysis. Of these, 10.6% had significant dehydration based on our criterion standard. The Clinical Dehydration Scale (CDS) and Gorelick scales both had an area under the ROC curve (AUC) statistically different from the reference line with AUCs of 0.72 (95% CI 0.60, 0.84) and 0.71 (95% CI 0.57, 0.85) respectively. The World Health Organization (WHO) scale and physician gestalt had AUCs of 0.61 (95% CI 0.45, 0.77) and 0.61 (0.44, 0.78) respectively, which were not statistically significant. The Gorelick scale and Clinical Dehydration Scale were fair predictors of dehydration in children with diarrhea or vomiting. The World Health Organization scale and physician gestalt were not helpful predictors of dehydration in our cohort.

External Validation and Comparison of Three Pediatric Clinical Dehydration Scales

PubMed Central

Jauregui, Joshua; Nelson, Daniel; Choo, Esther; Stearns, Branden; Levine, Adam C.; Liebmann, Otto; Shah, Sachita P.

2014-01-01

Objective To prospectively validate three popular clinical dehydration scales and overall physician gestalt in children with vomiting or diarrhea relative to the criterion standard of percent weight change with rehydration. Methods We prospectively enrolled a non-consecutive cohort of children ≤ 18 years of age with an acute episode of diarrhea or vomiting. Patient weight, clinical scale variables and physician clinical impression, or gestalt, were recorded before and after fluid resuscitation in the emergency department and upon hospital discharge. The percent weight change from presentation to discharge was used to calculate the degree of dehydration, with a weight change of ≥ 5% considered significant dehydration. Receiver operating characteristics (ROC) curves were constructed for each of the three clinical scales and physician gestalt. Sensitivity and specificity were calculated based on the best cut-points of the ROC curve. Results We approached 209 patients, and of those, 148 were enrolled and 113 patients had complete data for analysis. Of these, 10.6% had significant dehydration based on our criterion standard. The Clinical Dehydration Scale (CDS) and Gorelick scales both had an area under the ROC curve (AUC) statistically different from the reference line with AUCs of 0.72 (95% CI 0.60, 0.84) and 0.71 (95% CI 0.57, 0.85) respectively. The World Health Organization (WHO) scale and physician gestalt had AUCs of 0.61 (95% CI 0.45, 0.77) and 0.61 (0.44, 0.78) respectively, which were not statistically significant. Conclusion The Gorelick scale and Clinical Dehydration Scale were fair predictors of dehydration in children with diarrhea or vomiting. The World Health Organization scale and physician gestalt were not helpful predictors of dehydration in our cohort. PMID:24788134

Zinc titanate sorbents

DOEpatents

Gupta, R.P.; Gangwal, S.K.; Jain, S.C.

1998-02-03

The present invention provides a zinc titanate sorbent material useful in desulfurization applications. The zinc titanate material is in the form of generally spherical particles of substantially uniform chemical distribution. The sorbent material is capable of absorbing sulfur compounds from a gaseous feed in an amount of at least about 15 weight percent based on the weight of the sorbent. The sorbent material is prepared by a process including: (a) forming a zinc oxide/titanium dioxide dry blend, (b) preparing a substantially uniform aqueous slurry comprising the zinc oxide/titanium dioxide dry blend, organic binder, and at least about 1 weight percent inorganic binder based on the solids weight of the slurry, (c) spray drying the slurry to produce substantially spherical particles, and (d) calcining the particles at a temperature of between about 750 to about 950 C. The dry blend is formed by mixing between about 0.5 to about 2 parts zinc oxide having a median particle size of less than about 0.5 microns, and about 1 part titanium dioxide having a median particle size of less than about 1 micron. The slurry contains substantially no free silica and may be prepared by the process including (1) preparing an aqueous solution of organic binder, (2) adding the dry blend to the aqueous solution of organic binder, and (3) adding the inorganic binder to the solution of organic binder, and blend. Additional reagents, such as a surfactant, may also be incorporated into the sorbent material. The present invention also provides a process for desulfurizing a gaseous stream. The process includes passing a gaseous stream through a reactor containing an attrition resistant zinc titanate sorbent material of the present invention.

Zinc titanate sorbents

DOEpatents

Gupta, Raghubir P.; Gangwal, Santosh K.; Jain, Suresh C.

1998-01-01

The present invention provides a zinc titanate sorbent material useful in desulfurization applications. The zinc titanate material is in the form of generally spherical particles of substantially uniform chemical distribution. The sorbent material is capable of absorbing sulfur compounds from a gaseous feed in an amount of at least about 15 weight percent based on the weight of the sorbent. The sorbent material is prepared by a process including: (a) forming a zinc oxide/titanium dioxide dry blend, (b) preparing a substantially uniform aqueous slurry comprising the zinc oxide/titanium dioxide dry blend, organic binder, and at least about 1 weight percent inorganic binder based on the solids weight of the slurry, (c) spray drying the slurry to produce substantially spherical particles, and (d) calcining the particles at a temperature of between about 750.degree. C. to about 950.degree. C. The dry blend is formed by mixing between about 0.5 to about 2 parts zinc oxide having a median particle size of less than about 0.5 .mu., and about 1 part titanium dioxide having a median particle size of less than about 1 .mu.. The slurry contains substantially no free silica and may be prepared by the process including (1) preparing an aqueous solution of organic binder, (2) adding the dry blend to the aqueous solution of organic binder, and (3) adding the inorganic binder to the solution of organic binder, and blend. Additional reagents, such as a surfactant, may also be incorporated into the sorbent material. The present invention also provides a process for desulfurizing a gaseous stream. The process includes passing a gaseous stream through a reactor containing an attrition resistant zinc titanate sorbent material of the present invention.

Case 39: Anorexia nervosa

USDA-ARS?s Scientific Manuscript database

Anorexia nervosa is a disease affecting primarily young women who have distorted body images. Although their weight is less than 30 percent under ideal body weight, they see themselves as overweight. Anorectics often use diuretic and laxative agents to accomplish their weight loss. Patients with bul...

21 CFR 172.820 - Polyethylene glycol (mean molecular weight 200-9,500).

Code of Federal Regulations, 2010 CFR

2010-04-01

... ethylene oxide and water with a mean molecular weight of 200 to 9,500. (2) It contains no more than 0.2 percent total by weight of ethylene and diethylene glycols when tested by the analytical methods... the total ethylene and diethylene glycol content of polyethylene glycols having mean molecular weights...

Piston manometer as an absolute standard for vacuum-gage calibration in the range 2 to 500 millitorr

NASA Technical Reports Server (NTRS)

Warshawsky, I.

1972-01-01

A thin disk is suspended, with very small annular clearance, in a cylindrical opening in the base plate of a calibration chamber. A continuous flow of calibration gas passes through the chamber and annular opening to a downstream high vacuum pump. The ratio of pressures on the two faces of the disk is very large, so that the upstream pressure is substantially equal to net force on the disk divided by disk area. This force is measured with a dynamometer that is calibrated in place with dead weights. A probable error of + or - (0.2 millitorr plus 0.2 percent) is attainable when downstream pressure is known to 10 percent.

Analysis of the Barrier Properties of Polyimide-Silicate Nanocomposites

NASA Technical Reports Server (NTRS)

Campbell, Sandi; Johnston, J. Chris; Inghram, Linda; McCorkle, Linda; Silverman, Edward

2003-01-01

Montmorillonite clay was organically modified and dispersed into a thermoplastic (BPADA-BAPP) and a thermosetting (PMR-15) polyimide matrix. The barrier properties of the neat resins and the nanocomposites were evaluated. Reductions in gas permeability and water absorption were observed in thermoplastic polyimide nanocomposites. The thermosetting polyimide showed a reduction in weight loss during isothermal aging at 288 C. Carbon fabric (T650-35, 8 HS, 8 ply) composites were prepared using both the BPADE-BAPP and PMR-15 based nanocomposites. Dispersion of the layered silicate in the BPADA-BAPP matrix reduced helium permeability by up to 70 percent. The PMR-15/ silicate nanocomposite matrix had an increase in thermal oxidative stability of up to 25 percent.

Weather delay costs to trucking.

DOT National Transportation Integrated Search

2012-11-01

Estimates of the nations freight sector of transportation range to upwards of $600 billion of total gross domestic product with 70 percent of total value and 60 percent of total weight moving by truck. Weather-related delays can add significantly ...

40 CFR 721.538 - Phenol, 4-(1,1-dimethyl- ethyl)-, homopolymer.

Code of Federal Regulations, 2013 CFR

2013-07-01

... weight species below 1,000 and 500 are less than 25 percent and 10 percent, respectively. To be eligible... also include the following statement: This substance is toxic to aquatic invertebrate. (ii) Industrial...

40 CFR 721.538 - Phenol, 4-(1,1-dimethyl- ethyl)-, homopolymer.

Code of Federal Regulations, 2012 CFR

2012-07-01

... weight species below 1,000 and 500 are less than 25 percent and 10 percent, respectively. To be eligible... also include the following statement: This substance is toxic to aquatic invertebrate. (ii) Industrial...

40 CFR 721.538 - Phenol, 4-(1,1-dimethyl- ethyl)-, homopolymer.

Code of Federal Regulations, 2014 CFR

2014-07-01

... weight species below 1,000 and 500 are less than 25 percent and 10 percent, respectively. To be eligible... also include the following statement: This substance is toxic to aquatic invertebrate. (ii) Industrial...

Utilization of potatoes for life support systems in space. IV - Effect of CO2 enrichment

NASA Technical Reports Server (NTRS)

Wheeler, Raymond M.; Tibbitts, Theodore W.

1989-01-01

To assess the response of potato to elevated carbon dioxide levels in life support farms for space colonies, Norland and Russet Burbank were grown in solid stands in separate controlled environment rooms at two CO2 levels, 365 micromol/mol and 1000 micromol/mol. It is found that potatoes show only marginal growth gains from elevated CO2: tuber dry weight increased by 2 percent for Norland, and 12 percent for Russet Burbank. CO2 assimilation rates of Norland leaves increased by about 24 percent, but assimilation rates of Russet Burbank leaves decreased by about 12 percent. It is concluded that the best productivity obtained in the study (21.9 g tuber dry weight/sq m/day from Norland at 1000 micromol/mol of CO2) indicates that the dietary energy needs of one human in space could be supplied from 34 sq m of potatoes.

Influence of excess diamine on properties of PMR polyimide resins and composites

NASA Technical Reports Server (NTRS)

Hurwitz, F. I.

1980-01-01

By varying the stoichiometry of the reactants in the preparation of PMR polyimide resin, changes occur in molecular weight distribution which influence the rheological properties and thus the processability of the resin, as well as the mechanical properties of the composite. The influence of 1-10 percent molar excess MDA on the molecular weight distribution and rheological properties of an imidized PMR system were exposed. Molecular weight distribution is characterized by gel permeation chromatography of the imidized molding compound; shear viscosity is related to changes in average molecular weight. The thermo-oxidative stability at 600 F, glass transition temperature, flexural and interlaminar shear properties of PMR polyimide/Celion 6000 graphite fiber composites are compared as a function of the percent excess MDA in the monomer reactant mixture.

Key Facts about the Children: Florida Kids Count 1994. A Report on the Status of Florida's Children: Volume V.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Florida Center for Children and Youth.

This Kids Count report investigates statewide trends in the well-being of Florida's children. The statistical report is based on 19 indicators of child well being: (1) low birth weight infants; (2) infant mortality rate; (3) child death rate; (4) births to single teens; (5) juvenile violent crime arrest rate; (6) percent graduating from high…

Aerodynamic Performance Measurements for a Forward Swept Low Noise Fan

NASA Technical Reports Server (NTRS)

Fite, E. Brian

2006-01-01

One source of noise in high tip speed turbofan engines, caused by shocks, is called multiple pure tone noise (MPT's). A new fan, called the Quiet High Speed Fan (QHSF), showed reduced noise over the part speed operating range, which includes MPT's. The QHSF showed improved performance in most respects relative to a baseline fan; however, a partspeed instability discovered during testing reduced the operating range below acceptable limits. The measured QHSF adiabatic efficiency on the fixed nozzle acoustic operating line was 85.1 percent and the baseline fan 82.9 percent, a 2.2 percent improvement. The operating line pressure rise at design point rotational speed and mass flow was 1.764 and 1.755 for the QHSF and baseline fan, respectively. Weight flow at design point speed was 98.28 lbm/sec for the QHSF and 97.97 lbm/sec for the baseline fan. The operability margin for the QHSF approached 0 percent at the 75 percent speed operating condition. The baseline fan maintained sufficient margin throughout the operating range as expected. Based on the stage aerodynamic measurements, this concept shows promise for improved performance over current technology if the operability limitations can be solved.

Small Engine Component Technology (SECT)

NASA Technical Reports Server (NTRS)

Early, M.; Dawson, R.; Zeiner, P.; Turk, M.; Benn, K.

1986-01-01

A study of small gas turbine engines was conducted to identify high payoff technologies for year-2000 engines and to define companion technology plans. The study addressed engines in the 186 to 746 KW (250 to 1000 shp) or equivalent thrust range for rotorcraft, commuter (turboprop), cruise missile (turbojet), and APU applications. The results show that aggressive advancement of high payoff technologies can produce significant benefits, including reduced SFC, weight, and cost for year-2000 engines. Mission studies for these engines show potential fuel burn reductions of 22 to 71 percent. These engine benefits translate into reductions in rotorcraft and commuter aircraft direct operating costs (DOC) of 7 to 11 percent, and in APU-related DOCs of 37 to 47 percent. The study further shows that cruise missile range can be increased by as much as 200 percent (320 percent with slurry fuels) for a year-2000 missile-turbojet system compared to a current rocket-powered system. The high payoff technologies were identified and the benefits quantified. Based on this, technology plans were defined for each of the four engine applications as recommended guidelines for further NASA research and technology efforts to establish technological readiness for the year 2000.

High temperature sorbents for oxygen

NASA Technical Reports Server (NTRS)

Sharma, Pramod K. (Inventor)

1994-01-01

A sorbent capable of removing trace amounts of oxygen (ppt) from a gas stream at a high temperature above 200 C comprising a porous alumina silicate support, such as zeolite, containing from 1 to 10 percent by weight of ion exchanged transition metal, such as copper or cobalt ions, and 0.05 to 1.0 percent by weight of an activator selected from a platinum group metal such as platinum is described. The activation temperature, oxygen sorption, and reducibility are all improved by the presence of the platinum activator.

Can body mass index predict percent body fat and changes in percent body fat with weight loss in bariatric surgery patients?

PubMed

Carey, Daniel G; Raymond, Robert L

2008-07-01

The primary objective of this study was to assess the validity of body mass index (BMI) in predicting percent body fat and changes in percent body fat with weight loss in bariatric surgery patients. Twenty-two bariatric patients (17 female, five male) began the study designed to include 12 months of testing, including data collection within 1 week presurgery and 1 month, 3 months, 6 months, and 1 year postsurgery. Five female subjects were lost to the study between 6 months and 12 months postsurgery, resulting in 17 subjects (12 female, five male) completing the 12 months of testing. Variables measured in the study included height, weight, percent fat (% fat) by hydrostatic weighing, lean mass, fat mass, and basal metabolic rate. Regression analyses predicting % fat from BMI yielded the following results: presurgery r = 0.173, p = 0.479, standard error of estimate (SEE) = 3.86; 1 month r = 0.468, p = 0.043, SEE = 4.70; 3 months r = 0.553, p = 0.014, SEE = 6.2; 6 months r = 0.611, p = 0.005, SEE = 5.88; 12 months r = 0.596, p = 0.007, SEE = 7.13. Regression analyses predicting change in % fat from change in BMI produced the following results: presurgery to 1 month r = -0.134, p = 0.583, SEE = 2.44%; 1-3 months r = 0.265, p = 0.272, SEE = 2.36%; 3-6 months r = 0.206, p = 0.398, SEE = 3.75%; 6-12 months r = 0.784, p = 0.000, SEE = 3.20. Although some analyses resulted in significant correlation coefficients (p < 0.05), the relatively large SEE values would preclude the use of BMI in predicting % fat or change in % fat with weight loss in bariatric surgery patients.

The Hispanic and Latino dentist workforce in the United States.

PubMed

Mertz, Elizabeth; Wides, Cynthia; Calvo, Jean; Gates, Paul

2017-03-01

The purpose of this paper is to describe the Hispanic/Latino (H/L) dentist workforce, their general practice patterns, and their contributions to oral health care for H/L and underserved patients. A national sample survey of underrepresented minority dentists was conducted in 2012 and received a 35.4 percent response rate for self-reported H/L dentists. Data were weighted for selection and response bias to be nationally representative. A workforce profile of H/L dentists was created using descriptive and multivariable statistics and published data. Among all H/L dentists (weighted n = 5,748), 31.9 percent self-identify their origin as Mexican, 13.4 percent as Puerto Rican, 13.0 percent as Cuban, and 41.7 percent as another H/L group. The largest share of H/L dentists are male, married, and have children under age 18. Fifty percent of H/L dentists are foreign-born and 25 percent are foreign-trained. H/L dentists report higher than average educational debt, with those completing International Dentist Programs reporting the highest debt load. Sixty-nine percent of clinically active H/L dentists own their own practices, and 85 percent speak Spanish in their practice. Among clinical H/L dentists, 7 percent work in safety-net settings, 40 percent primarily treat underserved populations, and, on average, 42 percent of their patient population is H/L. H/L dental providers are underrepresented in the dentist population, and those that are in practice shoulder a disproportionate share of dental care for minority and underserved communities. Improving the workforce diversity of dental providers is a critical part of strategy to address the high burden of dental disease in the H/L population. © 2016 American Association of Public Health Dentistry.

KSC-03PD-1076

NASA Technical Reports Server (NTRS)

2003-01-01

KENNEDY SPACE CENTER, FLA. - Pieces of Columbia debris are photographed by a KSC photographer. More than 70,000 items, weighing 78,000 pounds, about 36 percent of the Shuttle by weight, have been delivered to KSC for use in the mishap investigation. Ground teams have completed 78 percent of their primary search area, and airborne crews finished 80 percent of their assigned area. Search teams have completed 98 percent of the underwater searches in Lake Nacogdoches and Toledo Bend Reservoir.

7 CFR 51.1583 - Damage.

Code of Federal Regulations, 2011 CFR

2011-01-01

... of the total weight of the potato including peel covering defective area. Loss of outer skin... percent of the total weight of the potato including peel covering defective area. (g) Rhizoctonia, when...

Influence of 7 days of hindlimb suspension and intermittent weight support on rat muscle mechanical properties

NASA Technical Reports Server (NTRS)

Pierotti, David J.; Roy, Roland R.; Flores, Vinicio; Edgerton, Reggie

1990-01-01

The effect of intermittent periods of weight support on a decrease in mass of the soleus (Sol) and medial gastrocnemius (MG) muscles atrophied by hindlimb suspension (HS) was investigated in rats subjected to continuous HS for seven days or an HS plus intermittent (10 min every 6 hrs of slow walking on a treadmill) weight support (HS-WS). After 7 d HS, the Sol weight relative to body weight was 21 and 9 percent lower in Hs and HS-WS, respectively, than in control rats. Maximum tetanic tension/muscle mass ratio was significantly lower in HS than in controls; the HS-WS rats had values similar to controls, whereas the maximum tetanic tension/muscle weight was significantly elevated in HS-WS compared to controls. Contraction times were 25 percent faster in the Sol and unchanged in the MG of HS rats, indicating that a low-force short-duration exercise regime results in a significant functional recovery in the 'slow' Sol, whereas the 'fast' MG is less affected.

21 CFR 176.170 - Components of paper and paperboard in contact with aqueous and fatty foods.

Code of Federal Regulations, 2013 CFR

2013-04-01

... acrylamide monomer and having an average nitrogen content of 14.9 percent such that a 1 percent by weight... ethylenediamine sulfate having a nitrogen content of 22.5-25.0 percent (Kjeldahl dry basis) and containing no more.... Acrylonitrile polymer with styrene, reaction product with ethylenediamine acetate, having a nitrogen content of...

21 CFR 176.170 - Components of paper and paperboard in contact with aqueous and fatty foods.

Code of Federal Regulations, 2012 CFR

2012-04-01

... acrylamide monomer and having an average nitrogen content of 14.9 percent such that a 1 percent by weight... ethylenediamine sulfate having a nitrogen content of 22.5-25.0 percent (Kjeldahl dry basis) and containing no more.... Acrylonitrile polymer with styrene, reaction product with ethylenediamine acetate, having a nitrogen content of...

Lightweight Electrode For Nickel/Hydrogen Cell

NASA Technical Reports Server (NTRS)

Britton, Doris L.

1994-01-01

Improved substrate for nickel electrode increases specific energy of nickel/hydrogen cell. Consists of 50 percent by weight nickel fiber, 35 percent nickel powder, and 15 percent cobalt powder. Porosity and thickness of nickel electrodes affect specific energy, initial performance, and cycle life of cell. Substrate easily manufactured with much larger porosities than those of heavy-sintered state-of-art nickel substrate.

Unions, Norms, and the Rise in U.S. Wage Inequality

ERIC Educational Resources Information Center

Western, Bruce; Rosenfeld, Jake

2011-01-01

From 1973 to 2007, private sector union membership in the United States declined from 34 to 8 percent for men and from 16 to 6 percent for women. During this period, inequality in hourly wages increased by over 40 percent. We report a decomposition, relating rising inequality to the union wage distribution's shrinking weight. We argue that unions…

Characterization of the Water Soluble Component of Inedible Residue from Candidate CELSS Crops

NASA Technical Reports Server (NTRS)

Garland, Jay

1992-01-01

Recycling of inorganic nutrients required for plant growth will be a necessary component of a fully closed, bioregenerative life support system. This research characterized the recovery of plant nutrients from the inedible fraction of three crop types (wheat, potato, and soybean) by soaking, or leaching, in water. A considerable portion of the dry weight of the inedible biomass was readily soluble (29 percent for soybean, 43 percent for wheat, and 52 percent for potato). Greater weight loss from potato was a result of higher tissue concentrations of potassium, nitrate, and phosphate. Approximately 25 percent of the organic content of the biomass was water soluble, while the majority of most inorganic nutrients, except for calcium and iron, were recovered in the leachate. Direct use of the leachates in hydroponic media could provide between 40-90 percent of plant nutrient demands for wheat, and 20-50 percent of demand for soybean and potato. Further evaluation of leaching as a component of resource recovery scheme in a bioregenerative system requires study of (1) utilization of plant leachates in hydroponic plant culture; and (2) conversion of organic material (both soluble and insoluble) into edible, or other useful, products.

The Estimation of Compaction Parameter Values Based on Soil Properties Values Stabilized with Portland Cement

NASA Astrophysics Data System (ADS)

Lubis, A. S.; Muis, Z. A.; Pasaribu, M. I.

2017-03-01

The strength and durability of pavement construction is highly dependent on the properties and subgrade bearing capacity. This then led to the idea of the selection methods to estimate the density of the soil with the proper implementation of the system, fast and economical. This study aims to estimate the compaction parameter value namely the maximum dry unit weight (γd max) and optimum moisture content (wopt) of the soil properties value that stabilized with Portland Cement. Tests conducted in the laboratory of soil mechanics to determine the index properties (fines and liquid limit) and Standard Compaction Test. Soil samples that have Plasticity Index (PI) between 0-15% then mixed with Portland Cement (PC) with variations of 2%, 4%, 6%, 8% and 10%, each 10 samples. The results showed that the maximum dry unit weight (γd max) and wopt has a significant relationship with percent fines, liquid limit and the percentation of cement. Equation for the estimated maximum dry unit weight (γd max) = 1.782 - 0.011*LL + 0,000*F + 0.006*PS with R2 = 0.915 and the estimated optimum moisture content (wopt) = 3.441 + 0.594*LL + 0,025*F + 0,024*PS with R2 = 0.726.

700 F properties of autoclave cured PMR-II composites

NASA Technical Reports Server (NTRS)

Cifani, Diane

1988-01-01

Studies were conducted to develop autoclave processing parameters for graphite reinforced PMR-2 resin composite materials intended for use in applications at temperatures up to 371 degrees (700 F). The effect of resin composition on autoclaveability was investigated. The effect of various graphite fibers and resin composition on 343 C (650 F) and 371 C (700 F) thermo-oxidative stability and mechanical properties was also investigated. The results of the processing studies show that PMR-2 resin composites can be easily fabricated under autoclave conditions. Autoclaved laminates exposed to 1 atm of air at 343 C (650 F) and 371 C (700 F) exhibited less than 5 percent weight loss after 750 hr exposure to 650 F air and 8 percent weight loss during exposure to 700 F air for 500 hr. After 500 hr exposure, autoclaved laminates exhibited greater than 90 percent retention of initial 650 and 700 F flexural and interlaminar shear strengths. The effect of resin formulated molecular weight and postcure conditions on laminate glass transition temperature is also discussed.

The 700 F properties of autoclave cured PMR-2 composites

NASA Technical Reports Server (NTRS)

Vannucci, Raymond D.; Cifani, Diane

1988-01-01

Studies were conducted to develop autoclave processing parameters for graphite reinforced PMR-2 resin composite materials intended for use in applications at temperatures up to 371 degrees (700 F). The effect of resin composition on autoclaveability was investigated. The effect of various graphite fibers and resin composition on 343 C (650 F) and 371 C (700 F) thermo-oxidative stability and mechanical properties was also investigated. The results of the processing studies show that PMR-2 resin composites can be easily fabricated under autoclave conditions. Autoclaved laminates exposed to 1 atm of air at 343 C (650 F) and 371 C (700 F) exhibited less than 5 percent weight loss after 750 hr exposure to 650 F air and 8 percent weight loss during exposure to 700 F air for 500 hr. After 500 hr exposure, autoclaved laminates exhibited greater than 90 percent retention of initial 650 and 700 F flexural and interlaminar shear strengths. The effect of resin formulated molecular weight and postcure conditions on laminate glass transition temperature is also discussed.

Preliminary appraisal of hydrogen and methane fuel in a Mach 2.7 supersonic transport

NASA Technical Reports Server (NTRS)

Whitlow, J. B., Jr.; Weber, R. J.; Civinskas, K. C.

1972-01-01

The higher heating value of hydrogen relative to JP fuel is estimated to reduce fuel weight by three fold and gross weight by 40 percent for comparable designed airplanes of equal payload and range. Engine design parameters were varied to determine the influence of lower noise goals on gross weight and direct operating cost. At current fuel prices, the DOC of a hydrogen airplane would be much higher than that of a JP airplane. A methane airplane could offer an 8.5-percent lower KOC than JP. But future shortages may escalate the prices of both JP and methane, whereas the price of hydrogen manufactured hydrolytically could be reduced from present levels. If in the future all three fuels are postulated to have equal costs per unit of energy, the DOC for hydrogen could be as much as 20 percent below that for JP on the reference 4000-nautical-mile mission. Longer ranges or lower noise requirements would improve the advantage of hydrogen.

Algal culture studies related to a closed ecological life support system

NASA Technical Reports Server (NTRS)

Radmer, R.; Behrens, P.; Fernandez, E.; Ollinger, O.; Howell, C.

1984-01-01

Studies on the steady-state long-term (4 month) culture of Scenedesmus obliquus algae, maintained in an annular air-lift column operated as a turbidostat, were carried out to evaluate the life-supporting possibilities of this system. Chlorophyll production and cell number as functions of the dry weight were linear at constant illumination. Productivity (measured as the product of dry weight, mg/ml, and the growth rate, ml/hr) vs. dry weight rose linearly until the cell density reached a level at which light became limiting (89 percent absorption of the photosynthetically active radiation). In the initial, linear portion of the curve, the productivity was limited by cell growth at the given light intensity. The maximum dilution rate of the system corresponded to the doubling time of 13.4 hr, about half the maximum rate, with a productivity of 80 percent of the maximum theoretical productivity. The high light utilization efficiencies were contributed by the low (10 percent of full sunlight) incident intensities.

Weight distribution in the current annual twigs of barclay willow.

Treesearch

John F. Thilenius

1988-01-01

The current annual twigs of unbrowsed Barclay willow (Salix barclayi Anderss.) grow as gently tapering cylinders. Consequently, the distal half of the twig has only 33 to 41 percent of the total weight. Longer twigs have proportionally less weight in the distal end. The total weight of an unbrowsed twig can be estimated by simple regression of...

Treatment to Destroy Chlorohydrocarbon Liquids in the Ground

NASA Technical Reports Server (NTRS)

Quinn, Jacqueline; Clausen, Christian A., III; Geiger, Cherie L.; Reinhart, Debra; Brooks, Kathleen

2003-01-01

A relatively simple chemical treatment that involves the use of emulsified iron has been found to be effective in remediating groundwater contaminated with trichloroethylene and other dense chlorohydrocarbon liquids. These liquids are members of the class of dense, nonaqueous phase liquids (DNAPLs), which are commonly recognized to be particularly troublesome as environmental contaminants. The treatment converts these liquids into less-harmful products. As a means of remediation of contaminated groundwater, this treatment takes less time and costs less than do traditional pump-and-treat processes. At some sites, long-term leakage and/or dissolution of chlorohydrocarbon liquids from pools and/or sorbed concentrations in rock and soil gives rise to a need to continue pumpand- treat processes for times as long as decades in order to maintain protection of human health and the environment. In contrast, the effects of the emulsified-iron treatment are more lasting, decreasing the need for long-term treatment and monitoring of contaminated areas. The material used in this treatment consists of iron particles with sizes of the order of nanometers to micrometers contained within the micelles of a surfactant-stabilized, biodegradable, oil-in-water emulsion. The emulsion is simple to prepare and consists of relatively inexpensive and environmentally acceptable ingredients: One typical formulation consists of 1.3 weight percent of a food-grade surfactant, 17.5 weight percent of iron particles, 23.2 weight percent of vegetable oil, and 58.0 weight percent of water.

Preliminary Evaluation of a Turbine/Rotary Combustion Compound Engine for a Subsonic Transport. [fuel consumption and engine tests of turbofan engines

NASA Technical Reports Server (NTRS)

Civinskas, K. C.; Kraft, G. A.

1976-01-01

The fuel consumption of a modern compound engine with that of an advanced high pressure ratio turbofan was compared. The compound engine was derived from a turbofan engine by replacing the combustor with a rotary combustion (RC) engine. A number of boost pressure ratios and compression ratios were examined. Cooling of the RC engine was accomplished by heat exchanging to the fan duct. Performance was estimated with an Otto-cycle for two levels of energy lost to cooling. The effects of added complexity on cost and maintainability were not examined and the comparison was solely in terms of cruise performance and weight. Assuming a 25 percent Otto-cycle cooling loss (representative of current experience), the best compound engine gave a 1.2 percent improvement in cruise. Engine weight increased by 23 percent. For a 10 percent Otto-cycle cooling loss (representing advanced insulation/high temperature materials technology), a compound engine with a boost PR of 10 and a compression ratio of 10 gave an 8.1 percent lower cruise than the reference turbofan.

21 CFR 178.2010 - Antioxidants and/or stabilizers for polymers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... § 176.170(c) of this chapter. Cupric acetate and lithium iodide For use at levels not exceeding 0.025 percent cupric acetate and 0.065 percent lithium iodide by weight of nylon 66 resins complying with § 177...

21 CFR 178.2010 - Antioxidants and/or stabilizers for polymers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... § 176.170(c) of this chapter. Cupric acetate and lithium iodide For use at levels not exceeding 0.025 percent cupric acetate and 0.065 percent lithium iodide by weight of nylon 66 resins complying with § 177...

21 CFR 178.2010 - Antioxidants and/or stabilizers for polymers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... § 176.170(c) of this chapter. Cupric acetate and lithium iodide For use at levels not exceeding 0.025 percent cupric acetate and 0.065 percent lithium iodide by weight of nylon 66 resins complying with § 177...

Novel lead-iron phosphate glass

DOEpatents

Boatner, Lynn A.; Sales, Brian C.

1989-01-01

The invention described and claimed in the specification relates to the discovery that effective addition of Fe.sub.2 O.sub.3 to a lead phosphate glass results in a glass having enhanced chemical durability and physical stability, and consists essentially of the glass resulting from melting a mixture consisting essentially of, in weight percent, 40-66 percent PbO, 30-55 percent P.sub.2 O.sub.5 and an effective concentration up to 12 percent Fe.sub.2 O.sub.3.

Novel lead-iron phosphate glass

DOEpatents

Boatner, L.A.; Sales, B.C.

1989-07-11

The invention described and claimed in the specification relates to the discovery that effective addition of Fe[sub 2]O[sub 3] to a lead phosphate glass results in a glass having enhanced chemical durability and physical stability, and consists essentially of the glass resulting from melting a mixture consisting essentially of, in weight percent, 40--66 percent PbO, 30--55 percent P[sub 2]O[sub 5] and an effective concentration up to 12 percent Fe[sub 2]O[sub 3].

Effect of an environmental school-based obesity prevention program on changes in body fat and body weight: a randomized trial.

PubMed

Williamson, Donald A; Champagne, Catherine M; Harsha, David W; Han, Hongmei; Martin, Corby K; Newton, Robert L; Sothern, Melinda S; Stewart, Tiffany M; Webber, Larry S; Ryan, Donna H

2012-08-01

This study tested the efficacy of two school-based programs for prevention of body weight/fat gain in comparison to a control group, in all participants and in overweight children. The Louisiana (LA) Health study utilized a longitudinal, cluster randomized three-arm controlled design, with 28 months of follow-up. Children (N = 2,060; mean age = 10.5 years, SD = 1.2) from rural communities in grades 4-6 participated in the study. Seventeen school clusters (mean = 123 children/cluster) were randomly assigned to one of three prevention arms: (i) primary prevention (PP), an environmental modification (EM) program, (ii) primary + secondary prevention (PP+SP), the environmental program with an added classroom and internet education component, or (iii) control (C). Primary outcomes were changes in percent body fat and BMI z scores. Secondary outcomes were changes in behaviors related to energy balance. Comparisons of PP, PP+SP, and C on changes in body fat and BMI z scores found no differences. PP and PP+SP study arms were combined to create an EM arm. Relative to C, EM decreased body fat for boys (-1.7 ± 0.38% vs. -0.14 ± 0.69%) and attenuated fat gain for girls (2.9 ± 0.22% vs. 3.93 ± 0.37%), but standardized effect sizes were relatively small (<0.30). In conclusion, this school-based EM programs had modest beneficial effects on changes in percent body fat. Addition of a classroom/internet program to the environmental program did not enhance weight/fat gain prevention, but did impact physical activity and social support in overweight children.

Effect of an Environmental School-based Obesity Prevention Program On Changes in Body Fat and Body Weight: A Randomized Trial

PubMed Central

Williamson, D.A.; Champagne, C.M.; Harsha, D.; Han, H.; Martin, C.K.; Newton, R.L.; Sothern, M.; Stewart, T.M.; Webber, L.S.; Ryan, D.

2012-01-01

This study tested the efficacy of two school-based programs for prevention of body weight/fat gain in comparison to a control group, in all participants and in overweight children. The Louisiana (LA) Health study utilized a longitudinal, cluster randomized 3-arm controlled design, with 28 months of follow-up. Children (N=2060; M age = 10.5 years, SD = 1.2) from rural communities in Grades 4 to 6 participated in the study. 17 school clusters (M = 123 children/cluster) were randomly assigned to one of three prevention arms: 1) Primary Prevention (PP), an environmental modification program, 2) Primary + Secondary Prevention (PP+SP), the environmental program with an added classroom and internet education component, or 3) Control (C). Primary outcomes were changes in percent body fat and body mass index z scores. Secondary outcomes were changes in behaviors related to energy balance. Comparisons of PP, PP+SP, and C on changes in body fat and BMI z scores found no differences. PP and PP+SP study arms were combined to create an environmental modification arm (EM). Relative to C, EM decreased body fat for boys (−1.7% ± 0.38% versus −0.14% ± 0.69%) and attenuated fat gain for girls (2.9% ± 0.22% versus 3.93% ± 0.37%), but standardized effect sizes were relatively small (< 0.30). In conclusion, this school-based environmental modification programs had modest beneficial effects on changes in percent body fat. Addition of a classroom/internet program to the environmental program did not enhance weight/fat gain prevention, but did impact physical activity and social support in overweight children. PMID:22402733

High temperature set retarded well cement compositions and methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vinson, E.F.; Brothers, L.E.; Bour, D.L.

1991-03-05

This patent describes a set retarded cement composition which is substantially non-thinning at high temperatures. It comprises: hydraulic cement; sufficient water to form a pumpable slurry; a set retarder comprising at least one member selected from the group consisting of a copolymer of 2-acrylamido, 2-methylpropane sulfonic acid (AMPS) and acrylic acid having an average molecular weight below about 5000 and comprising from about 40 to about 60 mole percent AMPS, the copolymer being present in an amount in the range of from about 0.1 to about 5% by weight of cement, lignosulfonates present in an amount in the range ofmore » from about 0.1 to about 5% by weight of cement, borates present in an amount in the range of from about 0.2 to about 5% by weight of cement and organic acids present in an amount of from about 0.2 to about 5% by weight of cement; and a galactomannan gum which has been treated with a hydrophobing agent selected from the group consisting of potassium pyroantimonate present on the gum in an amount of from about 0.001 to about 0.3 percent by weight of the gum and compounds capable of liberating borate ions when added to water present on the gum in an amount of from about 0.5 to about 1.0 percent by weight of the gum, whereby the hydration rate of the gum is retarded at temperatures below about 120 degrees F. and at pH levels above about 10, but the hydration rate increases at temperatures above about 120 degrees F., the treated gum being present in the composition in an amount of at least about 0.5% by weight of cement.« less

16 CFR 1209.3 - General requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... no evidence of flaming combustion and shall also have weight loss of 15 percent or less of the initial weight, for each of the three specimens, when tested in accordance with the test procedures at...

16 CFR 1209.3 - General requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... no evidence of flaming combustion and shall also have weight loss of 15 percent or less of the initial weight, for each of the three specimens, when tested in accordance with the test procedures at...

21 CFR 176.170 - Components of paper and paperboard in contact with aqueous and fatty foods.

Code of Federal Regulations, 2014 CFR

2014-04-01

... average nitrogen content of 14.9 percent such that a 1 percent by weight aqueous solution has a minimum... sulfate having a nitrogen content of 22.5-25.0 percent (Kjeldahl dry basis) and containing no more than 0... polymer with styrene, reaction product with ethylenediamine acetate, having a nitrogen content of 7.4-8.3...

U. S. Army Operation Enduring Freedom Deployment Injury Surveillance Summary, 1 January-31 December 2012

DTIC Science & Technology

2015-06-01

Training, American Football , and Weight Lifting) ......................... 27 8. Causes of Air Evacuated Back Injuries (NBI) Iraq and Afghanistan...American football (14 percent). (Note: These data examples are not shown in the figure.) OEF Injury Intention 1 Air Evacuations...Blood Vessel Contu- sion/Su- perficial Crush Burns Nerves Unspeci- fied System- wide & late effects Post- Concussive Total Percent Percent by Body

40 CFR 63.1947 - When do I have to comply with this subpart if I own or operate a bioreactor?

Code of Federal Regulations, 2013 CFR

2013-07-01

... initiating liquids addition or within 180 days after achieving a moisture content of 40 percent by weight... achieving a 40 percent moisture content instead of 180 days after liquids addition, use the procedures in § 63.1980(g) and (h) to determine when the bioreactor moisture content reaches 40 percent. (b) If your...

40 CFR 63.1947 - When do I have to comply with this subpart if I own or operate a bioreactor?

Code of Federal Regulations, 2014 CFR

2014-07-01

... initiating liquids addition or within 180 days after achieving a moisture content of 40 percent by weight... achieving a 40 percent moisture content instead of 180 days after liquids addition, use the procedures in § 63.1980(g) and (h) to determine when the bioreactor moisture content reaches 40 percent. (b) If your...

40 CFR 63.1947 - When do I have to comply with this subpart if I own or operate a bioreactor?

Code of Federal Regulations, 2012 CFR

2012-07-01

... initiating liquids addition or within 180 days after achieving a moisture content of 40 percent by weight... achieving a 40 percent moisture content instead of 180 days after liquids addition, use the procedures in § 63.1980(g) and (h) to determine when the bioreactor moisture content reaches 40 percent. (b) If your...

Geodesy- and geology-based slip-rate models for the Western United States (excluding California) national seismic hazard maps

USGS Publications Warehouse

Petersen, Mark D.; Zeng, Yuehua; Haller, Kathleen M.; McCaffrey, Robert; Hammond, William C.; Bird, Peter; Moschetti, Morgan; Shen, Zhengkang; Bormann, Jayne; Thatcher, Wayne

2014-01-01

The 2014 National Seismic Hazard Maps for the conterminous United States incorporate additional uncertainty in fault slip-rate parameter that controls the earthquake-activity rates than was applied in previous versions of the hazard maps. This additional uncertainty is accounted for by new geodesy- and geology-based slip-rate models for the Western United States. Models that were considered include an updated geologic model based on expert opinion and four combined inversion models informed by both geologic and geodetic input. The two block models considered indicate significantly higher slip rates than the expert opinion and the two fault-based combined inversion models. For the hazard maps, we apply 20 percent weight with equal weighting for the two fault-based models. Off-fault geodetic-based models were not considered in this version of the maps. Resulting changes to the hazard maps are generally less than 0.05 g (acceleration of gravity). Future research will improve the maps and interpret differences between the new models.

Advanced powder metallurgy aluminum alloys via rapid solidification technology, phase 2

NASA Technical Reports Server (NTRS)

Ray, Ranjan; Jha, Sunil C.

1987-01-01

Marko's rapid solidification technology was applied to processing high strength aluminum alloys. Four classes of alloys, namely, Al-Li based (class 1), 2124 type (class 2), high temperature Al-Fe-Mo (class 3), and PM X7091 type (class 4) alloy, were produced as melt-spun ribbons. The ribbons were pulverized, cold compacted, hot-degassed, and consolidated through single or double stage extrusion. The mechanical properties of all four classes of alloys were measured at room and elevated temperatures and their microstructures were investigated optically and through electron microscopy. The microstructure of class 1 Al-Li-Mg alloy was predominantly unrecrystallized due to Zr addition. Yield strengths to the order of 50 Ksi were obtained, but tensile elongation in most cases remained below 2 percent. The class 2 alloys were modified composition of 2124 aluminum alloy, through addition of 0.6 weight percent Zr and 1 weight percent Ni. Nickel addition gave rise to a fine dispersion of intermetallic particles resisting coarsening during elevated temperature exposure. The class 2 alloy showed good combination of tensile strength and ductility and retained high strength after 1000 hour exposure at 177 C. The class 3 Al-Fe-Mo alloy showed high strength and good ductility both at room and high temperatures. The yield and tensile strength of class 4 alloy exceeded those of the commercial 7075 aluminum alloy.

Do parents understand growth charts? A national, Internet-based survey.

PubMed

Ben-Joseph, Elana Pearl; Dowshen, Steven A; Izenberg, Neil

2009-10-01

The objective of this study was to assess parental knowledge and understanding of growth charts. An online survey was conducted with 1000 parents selected to be demographically representative of the US population. Questions explored awareness of, knowledge of, and attitudes toward growth monitoring, as well as the ability to interpret growth chart data. Seventy-nine percent of parents surveyed claimed to have seen a growth chart before, with the majority thinking that they understood it well. Sixty-four percent of parents thought it was important to be shown growth charts to see how their child was growing, and 40% expressed the need to see their child's growth chart as confirmation of their health care provider's verbal interpretation. However, when provided with multiple-choice questions and answers, only 64% could identify a child's weight when shown a plotted point on a growth chart. Ninety-six percent had heard of the term "percentile," but only 68% identified the percentile of the plotted point, and only 56% could identify the definition of percentile. Up to 77% interpreted incorrectly charts containing height/weight measurements in tandem. Although growth charts are used frequently as visual aids to educate parents about their children's growth, many parents cannot comprehend the data. This finding is significant because many parents prefer to be shown growth charts by their health care provider, and many parents report recording their children's measurements on growth charts at home.

30 CFR 7.23 - Application requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... products if the products differ only in: weight of the finished product; weight or weave of the same fabric... information: (1) Trade name. (2) Product designations (for example, style and code number). (3) Color. (4...) Scrim: Type, denier, weight, weave, the supplier, supplier's stock number or designation, and percent of...

30 CFR 7.23 - Application requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... products if the products differ only in: weight of the finished product; weight or weave of the same fabric... information: (1) Trade name. (2) Product designations (for example, style and code number). (3) Color. (4...) Scrim: Type, denier, weight, weave, the supplier, supplier's stock number or designation, and percent of...

Key Facts about the Children. A Report on the Status of Florida's Children: Volume VI. The 1996 Florida Kids Count Data Book.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Florida Center for Children and Youth.

This Kids Count report investigates county and statewide trends in the well-being of Florida's children. The statistical report is based on indicators of well-being in six areas: (1) child poverty; (2) births, including prenatal care access, infant mortality, low birth weight, and percent of births to unwed mothers; (3) teen parenthood; (4) child…

The prevalence of caries and tooth loss among participants in the Hispanic Community Health Study/Study of Latinos.

PubMed

Beck, James D; Youngblood, Marston; Atkinson, Jane C; Mauriello, Sally; Kaste, Linda M; Badner, Victor M; Beaver, Shirley; Becerra, Karen; Singer, Richard

2014-06-01

The Hispanic and Latino population is projected to increase from 16.7 percent to 30.0 percent by 2050. Previous U.S. national surveys had minimal representation of Hispanic and Latino participants other than Mexicans, despite evidence suggesting that Hispanic or Latino country of origin and degree of acculturation influence health outcomes in this population. In this article, the authors describe the prevalence and mean number of cavitated, decayed and filled surfaces, missing teeth and edentulism among Hispanics and Latinos of different national origins. Investigators in the Hispanic Community Health Study/Study of Latinos (HCHS/SOL)-a multicenter epidemiologic study funded by the National Heart, Lung, and Blood Institute with funds transferred from six other institutes, including the National Institute of Dental and Craniofacial Research-conducted in-person examinations and interviews with more than 16,000 participants aged 18 to 74 years in four U.S. cities between March 2008 and June 2011. The investigators identified missing, filled and decayed teeth according to a modified version of methods used in the National Health and Nutrition Examination Survey. The authors computed prevalence estimates (weighted percentages), weighted means and standard errors for measures. The prevalence of decayed surfaces ranged from 20.2 percent to 35.5 percent, depending on Hispanic or Latino background, whereas the prevalence of decayed and filled surfaces ranged from 82.7 percent to 87.0 percent, indicating substantial amounts of dental treatment. The prevalence of missing teeth ranged from 49.8 percent to 63.8 percent and differed according to Hispanic or Latino background. Significant differences in the mean number of decayed surfaces, decayed or filled surfaces and missing teeth according to Hispanic and Latino background existed within each of the age groups and between women and men. Oral health status differs according to Hispanic or Latino background, even with adjustment for age, sex and other characteristics. These data indicate that Hispanics and Latinos in the United States receive restorative dental treatment and that practitioners should consider the association between Hispanic or Latino origin and oral health status. This could mean that dental practices in areas dominated by patients from a single Hispanic or Latino background can anticipate a practice based on a specific pattern of treatment needs.

Cervid forage utilization in noncommercially thinned ponderosa pine forests

USGS Publications Warehouse

Gibbs, M.C.; Jenks, J.A.; Deperno, C.S.; Sowell, B.F.; Jenkins, Kurt J.

2004-01-01

To evaluate effects of noncommercial thinning, utilization of forages consumed by elk (Cervus elaphus L.), mule deer (Odocoileus hemionus Raf.), and white-tailed deer (Odocoileus virginianus Raf.) was measured in ponderosa pine (Pinus ponderosa P. & C. Lawson) stands in Custer State Park, S. D. Treatments consisted of unthinned (control; 22 to 32 m2/ha basal area), moderately thinned (12 to 22 m2/ha basal area), and heavily thinned (3 to 13 m2/ha basal area) stands of ponderosa pine. During June, July, and August, 1991 and 1992, about 7,000 individual plants were marked along permanent transects and percent-weight-removed by grazing was ocularly estimated. Sample plots were established along transects and plants within plots were clipped to estimate standing biomass. Pellet groups were counted throughout the study area to determine summer habitat use of elk and deer. Diet composition was evaluated using microhistological analysis of fecal samples. Average percent-weight-removed from all marked plants and percent-plants-grazed were used to evaluate forage utilization. Standing biomass of graminoids, shrubs, and forbs increased (P 0.05) across treatments. Forb use averaged less than 5% within sampling periods when measured as percent-weight-removed and percent-of-plants grazed and did not differ among treatments. Results of pellet group surveys indicated that cervids were primarily using meadow habitats. When averaged over the 2 years, forbs were the major forage class in deer diets, whereas graminoids were the major forage class in diets of elk.

21 CFR 177.1550 - Perfluorocarbon resins.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., lithium polysilicate, mentioned in paragraph (b)(4) of this section. (1) Substances generally recognized... substances, subject to any limitations prescribed: List of substances Limitations Lithium polysilicate containing not more than 20 weight percent silica, not more than 2.1 percent lithium oxide and having a...

40 CFR 86.129-80 - Road load power, test weight, and inertia weight class determination.

Code of Federal Regulations, 2012 CFR

2012-07-01

... power, test weight, and inertia weight class determination. (a) Flywheels, electrical or other means of... equipment exceeding 0.1 ft2 which are anticipated to be sold on more than 33 pct of the car line. Frontal... expected that more than 33 percent of a car line within an engine-system combination will be equipped with...

40 CFR 86.129-80 - Road load power, test weight, and inertia weight class determination.

Code of Federal Regulations, 2013 CFR

2013-07-01

... power, test weight, and inertia weight class determination. (a) Flywheels, electrical or other means of... equipment exceeding 0.1 ft2 which are anticipated to be sold on more than 33 pct of the car line. Frontal... expected that more than 33 percent of a car line within an engine-system combination will be equipped with...

48 CFR 245.7309-8 - Variations in quantity or weight.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Inventory 245.7309-8 Variations in quantity or weight. When property is sold on a “unit price” basis, the Contractor reserves the right to vary by up to 15 percent the quantity or weight listed in the Invitation and... price shall be adjusted in accordance with the unit price and on the basis of the quantity or weight...

40 CFR 86.129-80 - Road load power, test weight, and inertia weight class determination.

Code of Federal Regulations, 2010 CFR

2010-07-01

... power, test weight, and inertia weight class determination. (a) Flywheels, electrical or other means of... equipment exceeding 0.1 ft2 which are anticipated to be sold on more than 33 pct of the car line. Frontal... expected that more than 33 percent of a car line within an engine-system combination will be equipped with...

40 CFR 86.129-80 - Road load power, test weight, and inertia weight class determination.

Code of Federal Regulations, 2011 CFR

2011-07-01

... power, test weight, and inertia weight class determination. (a) Flywheels, electrical or other means of... equipment exceeding 0.1 ft2 which are anticipated to be sold on more than 33 pct of the car line. Frontal... expected that more than 33 percent of a car line within an engine-system combination will be equipped with...

21 CFR 178.3750 - Polyethylene glycol (mean molecular weight 200-9,500).

Code of Federal Regulations, 2010 CFR

2010-04-01

... conditions: (a) The additive is an addition polymer of ethylene oxide and water with a mean molecular weight of 200 to 9,500. (b) It contains no more than 0.2 percent total by weight of ethylene and diethylene... ethylene and diethylene glycols if its mean molecular weight is below 350, when tested by the analytical...

High Temperature Sorbents for Oxygen

NASA Technical Reports Server (NTRS)

Sharma, Pramod K. (Inventor)

1996-01-01

A sorbent capable of removing trace amounts of oxygen (ppt) from a gas stream at a high temperature above 200 C is introduced. The sorbent comprises a porous alumina silicate support such as zeolite containing from 1 to 10 percent by weight of ion exchanged transition metal such as copper or cobalt ions and 0.05 to 1.0 percent by weight of an activator selected from a platinum group metal such as platinum. The activation temperature, oxygen sorption and reducibility are all improved by the presence of the platinum activator.

Technology and benefits of aircraft counter rotation propellers

NASA Technical Reports Server (NTRS)

Strack, W. C.; Knip, G.; Weisbrich, A. L.; Godston, J.; Bradley, E.

1981-01-01

Results are reported of a NASA sponsored analytical investigation into the merits of advanced counter rotation propellers for Mach 0.80 commercial transport application. Propeller and gearbox performance, acoustics, vibration characteristics, weight, cost and maintenance requirements for a variety of design parameters and special features were considered. Fuel savings in the neighborhood of 8 percent relative to single rotation configurations are feasible through swirl recovery and lighter gearboxes. This is the net gain which includes a 5 percent acoustic treatment weight penalty to offset the broader frequency spectrum noise produced by counter rotation blading.

A Method for Decreasing the Amount of the Drug Remaining on the Surfaces of the Mortar and Pestle after Grinding Small Amount of Tablets.

PubMed

Kawakami, Miki; Kitada, Rika; Kurita, Takuro; Tokumura, Tadakazu

2017-01-01

The aim of the present study was to develop a method for grinding tablets with a mortar and pestle while reducing drug loss because grinding tablets is known to be associated with reductions in tablet weight and loss of the active drug. Seven kinds of tablets were subjected to grinding. The proportion (%) of the amount of the active drug in the powder remaining on the surfaces of the mortar and pestle relative to the total amount of the drug recovered (the recovery percent) was calculated. The recovery percent of the 7 kinds of tablets ranged from 17.2-35.9%, and the tablets' recovery percent decreased as the tablet weight increased. When the grinding was performed with 1 g of lactose monohydrate or 1 g of D-mannitol moistened with water, the recovery percent of the tablets decreased to 2.6-9.9% and 3.8-9.9%, respectively. The effects of the weight of lactose monohydrate on the recovery percent of Allegra ® 60 mg tablets were examined. It was found that at least 0.6 g of lactose monohydrate was required to have a sufficient effect on drug recovery. Therefore, additives that have stronger effects at lower amounts were sought. As a result, calcium monohydrogen phosphate was found to have the strongest effect on drug recovery. The addition of 0.4 g calcium monohydrogen phosphate resulted in the recovery percent of 5.1%, which was significantly lower than that of 15.0% observed after the addition of 0.4 g lactose monohydrate, and lower than the 6.8% of 1 g lactose monohydrate.

Comparison of recycling outcomes in three types of recycling collection units.

PubMed

Andrews, Ashley; Gregoire, Mary; Rasmussen, Heather; Witowich, Gretchen

2013-03-01

Commercial institutions have many factors to consider when implementing an effective recycling program. This study examined the effectiveness of three different types of recycling bins on recycling accuracy by determining the percent weight of recyclable material placed in the recycling bins, comparing the percent weight of recyclable material by type of container used, and examining whether a change in signage increased recycling accuracy. Data were collected over 6 weeks totaling 30 days from 3 different recycling bin types at a Midwest University medical center. Five bin locations for each bin type were used. Bags from these bins were collected, sorted into recyclable and non-recyclable material, and weighed. The percent recyclable material was calculated using these weights. Common contaminates found in the bins were napkins and paper towels, plastic food wrapping, plastic bags, and coffee cups. The results showed a significant difference in percent recyclable material between bin types and bin locations. Bin type 2 was found to have one bin location to be statistically different (p=0.048), which may have been due to lack of a trash bin next to the recycling bin in that location. Bin type 3 had significantly lower percent recyclable material (p<0.001), which may have been due to lack of a trash bin next to the recycling bin and increased contamination due to the combination of commingled and paper into one bag. There was no significant change in percent recyclable material in recycling bins post signage change. These results suggest a signage change may not be an effective way, when used alone, to increase recycling compliance and accuracy. This study showed two or three-compartment bins located next to a trash bin may be the best bin type for recycling accuracy. Copyright © 2012 Elsevier Ltd. All rights reserved.

46 CFR 160.151-57 - Servicing procedure.

Code of Federal Regulations, 2011 CFR

2011-10-01

... its weight loss exceeds five percent of the weight of the charge, it must be recharged. (c) When an... in the buoyancy tubes is audible, accompanied by pressure loss, condemn the liferaft. If it is not...