On the Contemporary Applications of Mindfulness: Some Implications for Education

ERIC Educational Resources Information Center

Hyland, Terry

2015-01-01

Interest in the Buddhist concept of mindfulness has burgeoned over the last few decades as a result of its application as a therapeutic strategy in mind-body medicine, psychotherapy, psychiatry, education, leadership and management, and a wide range of other theoretical and practical domains. Although many commentators welcome this extension of…

ecoSmart landscapes: a versatile SaaS platform for green infrastructure applications in urban environments

Treesearch

Greg McPherson; Qingfu Xiao; Joe Purohit; Mark Dietenberger; Charles (C.R.) Boardman; Jim Simpson; Paula Peper

2014-01-01

The urban environment offers significant opportunities to improve sustainability and optimize water resources. Historically, research and software applications have been focused on the built environment (buildings). Cost-effective, practical tools that can assess the impact of different landscape configurations and their interactions with buildings have not been widely...

Response Grids: Practical Ways to Display Large Data Sets with High Visual Impact

ERIC Educational Resources Information Center

Gates, Simon

2013-01-01

Spreadsheets are useful for large data sets but they may be too wide or too long to print as conventional tables. Response grids offer solutions to the challenges posed by any large data set. They have wide application throughout science and for every subject and context where visual data displays are designed, within education and elsewhere.…

Helping Families Improve: An Evaluation of Two Primary Care Approaches to Parenting Support in the Netherlands

ERIC Educational Resources Information Center

de Graaf, Ireen; Onrust, Simone; Haverman, Merel; Janssens, Jan

2009-01-01

The present study evaluated two primary care parenting interventions. First, we evaluated the most widely used Dutch practices for primary care parenting support. Second, we assessed the applicability of the Primary Care Triple P approach, which is now being utilized in a wide variety of primary care settings. Both interventions target parents of…

[Algorithms of artificial neural networks--practical application in medical science].

PubMed

Stefaniak, Bogusław; Cholewiński, Witold; Tarkowska, Anna

2005-12-01

Artificial Neural Networks (ANN) may be a tool alternative and complementary to typical statistical analysis. However, in spite of many computer applications of various ANN algorithms ready for use, artificial intelligence is relatively rarely applied to data processing. This paper presents practical aspects of scientific application of ANN in medicine using widely available algorithms. Several main steps of analysis with ANN were discussed starting from material selection and dividing it into groups, to the quality assessment of obtained results at the end. The most frequent, typical reasons for errors as well as the comparison of ANN method to the modeling by regression analysis were also described.

New preparations of the elemental diet and the clinical application.

PubMed

Ogoshi, S; Sato, H

1981-01-01

In 1978, we designed a new elemental diet, ED-AC, which modified after Vivonex-HN with the co-operation of Ajinomoto Co., Japan and Morton-Norwich Co., U.S.A.. ED-AC is now being used widely in Japan for enteral hyper-alimentation, even in case of pediatric surgery. We have new prepared another elemental diet, this time for infants, ED-P (pediatric). The ratio of amino acids in both ED was determined according the proposal of Professor Goro Inoue, Department of Nutrition, Tokushima University. The application of ED, particularly for surgical patients, has been most effective. the use of this diet for enteral hyperalimentation should find a wide application in surgical and medical practice.

Application of Droplet Digital PCR for Estimating Vector Copy Number States in Stem Cell Gene Therapy.

PubMed

Lin, Huan-Ting; Okumura, Takashi; Yatsuda, Yukinori; Ito, Satoru; Nakauchi, Hiromitsu; Otsu, Makoto

2016-10-01

Stable gene transfer into target cell populations via integrating viral vectors is widely used in stem cell gene therapy (SCGT). Accurate vector copy number (VCN) estimation has become increasingly important. However, existing methods of estimation such as real-time quantitative PCR are more restricted in practicality, especially during clinical trials, given the limited availability of sample materials from patients. This study demonstrates the application of an emerging technology called droplet digital PCR (ddPCR) in estimating VCN states in the context of SCGT. Induced pluripotent stem cells (iPSCs) derived from a patient with X-linked chronic granulomatous disease were used as clonable target cells for transduction with alpharetroviral vectors harboring codon-optimized CYBB cDNA. Precise primer-probe design followed by multiplex analysis conferred assay specificity. Accurate estimation of per-cell VCN values was possible without reliance on a reference standard curve. Sensitivity was high and the dynamic range of detection was wide. Assay reliability was validated by observation of consistent, reproducible, and distinct VCN clustering patterns for clones of transduced iPSCs with varying numbers of transgene copies. Taken together, use of ddPCR appears to offer a practical and robust approach to VCN estimation with a wide range of clinical and research applications.

Application of Droplet Digital PCR for Estimating Vector Copy Number States in Stem Cell Gene Therapy

PubMed Central

Lin, Huan-Ting; Okumura, Takashi; Yatsuda, Yukinori; Ito, Satoru; Nakauchi, Hiromitsu; Otsu, Makoto

2016-01-01

Stable gene transfer into target cell populations via integrating viral vectors is widely used in stem cell gene therapy (SCGT). Accurate vector copy number (VCN) estimation has become increasingly important. However, existing methods of estimation such as real-time quantitative PCR are more restricted in practicality, especially during clinical trials, given the limited availability of sample materials from patients. This study demonstrates the application of an emerging technology called droplet digital PCR (ddPCR) in estimating VCN states in the context of SCGT. Induced pluripotent stem cells (iPSCs) derived from a patient with X-linked chronic granulomatous disease were used as clonable target cells for transduction with alpharetroviral vectors harboring codon-optimized CYBB cDNA. Precise primer–probe design followed by multiplex analysis conferred assay specificity. Accurate estimation of per-cell VCN values was possible without reliance on a reference standard curve. Sensitivity was high and the dynamic range of detection was wide. Assay reliability was validated by observation of consistent, reproducible, and distinct VCN clustering patterns for clones of transduced iPSCs with varying numbers of transgene copies. Taken together, use of ddPCR appears to offer a practical and robust approach to VCN estimation with a wide range of clinical and research applications. PMID:27763786

ETS: DEVELOPMENT OF A PHOTOTHERMAL DETOXIFICATION UNIT

EPA Science Inventory

There has long been interest in utilizing photochemical methods for destroying hazardous organic materials. Unfortunately, the direct application of classic, low temperature photochemical processes to hazardous waste detoxification is often too slow to be practical for wide spre...

The Wide-Field Imaging Interferometry Testbed: Recent Progress

NASA Technical Reports Server (NTRS)

Rinehart, Stephen A.

2010-01-01

The Wide-Field Imaging Interferometry Testbed (WIIT) at NASA's Goddard Space Flight Center was designed to demonstrate the practicality and application of techniques for wide-field spatial-spectral ("double Fourier") interferometry. WIIT is an automated system, and it is now producing substantial amounts of high-quality data from its state-of-the-art operating environment, Goddard's Advanced Interferometry and Metrology Lab. In this paper, we discuss the characterization and operation of the testbed and present the most recent results. We also outline future research directions. A companion paper within this conference discusses the development of new wide-field double Fourier data analysis algorithms.

Social marketing: an overview of approach and effects.

PubMed

Smith, W A

2006-06-01

This paper reviews the applicability of commercial and social marketing to teen driving safety. It draws on a wide range of information, including evaluation studies of specific programs as well as standards of practice within these two professions. Social marketing has been widely applied for more than three decades in the fields of public health, environmental protection, and political marketing with significant success. The paper attempts to distinguish between the practice of commercial marketing, whose goal is profit, and the practice of social marketing, whose goal is societal benefit. Issues of sustainability, segmentation, differences in behavioral characteristics, and cultural competence are discussed with specific examples drawn from the transportation safety literature. The paper suggests that social marketing represents a viable companion to control and education approaches to behavior change to promote teen driving safety.

Numerical Nonlinear Robust Control with Applications to Humanoid Robots

DTIC Science & Technology

2015-07-01

automatically. While optimization and optimal control theory have been widely applied in humanoid robot control, it is not without drawbacks . A blind... drawback of Galerkin-based approaches is the need to successively produce discrete forms, which is difficult to implement in practice. Related...universal function approx- imation ability, these approaches are not without drawbacks . In practice, while a single hidden layer neural network can

Systems and complexity thinking in general practice: part 1 - clinical application.

PubMed

Sturmberg, Joachim P

2007-03-01

Many problems encountered in general practice cannot be sufficiently explained within the Newtonian reductionist paradigm. Systems and complexity thinking - already widely adopted in most nonmedical disciplines - describes and explores the contextual nature of questions posed in medicine, and in general practice in particular. This article briefly describes the framework underpinning systems and complexity sciences. A case study illustrates how systems and complexity thinking can help to better understand the contextual nature of patient presentations, and how different approaches will lead to different outcomes.

Broadening the Cloaking Bandwidth with Non-Foster Metasurfaces

NASA Astrophysics Data System (ADS)

Chen, Pai-Yen; Argyropoulos, Christos; Alù, Andrea

2013-12-01

We introduce the concept and practical design of broadband, ultrathin cloaks based on non-Foster, negatively capacitive metasurfaces. By using properly tailored, active frequency-selective screens conformal to an object, within the realm of a practical realization, we show that it is possible to drastically reduce the scattering over a wide frequency range in the microwave regime, orders of magnitude broader than any available passive cloaking technology. The proposed active cloak may impact not only invisibility and camouflaging, but also practical antenna and sensing applications.

EMERGING TECHNOLOGY REPORT: DEVELOPMENT OF A PHOTOTHERMAL DETOXIFICATION UNIT

EPA Science Inventory

There has long been interest in utilizing photochemical methods for destroying hazardous organic materials. Unfortunately, the direct application of classic, low temperature photochemical processes to hazardous waste detoxification are often too slow to be practical for wide spr...

Machine learning for science: state of the art and future prospects.

PubMed

Mjolsness, E; DeCoste, D

2001-09-14

Recent advances in machine learning methods, along with successful applications across a wide variety of fields such as planetary science and bioinformatics, promise powerful new tools for practicing scientists. This viewpoint highlights some useful characteristics of modern machine learning methods and their relevance to scientific applications. We conclude with some speculations on near-term progress and promising directions.

Useful Pedagogical Applications of the Classical Hall Effect

ERIC Educational Resources Information Center

Houari, Ahmed

2007-01-01

One of the most known phenomena in physics is the Hall effect. This is mainly due to its simplicity and to the wide range of its theoretical and practical applications. To complete the pedagogical utility of the Hall effect in physics teaching, I will apply it here to determine the Faraday constant as a fundamental physical number and the number…

Practical considerations for disaster preparedness and continuity management in research facilities.

PubMed

Mortell, Norman; Nicholls, Sam

2013-10-01

Many research facility managers, veterinarians and directors are familiar with the principles of Good Laboratory Practice, requirements of the Association for Assessment and Accreditation of Laboratory Animal Care International, tenets of biosecurity and standards of animal welfare and housing but may be less familiar with the ideas of business continuity. But business continuity considerations are as applicable to research facilities as they are to other institutions. The authors discuss how business continuity principles can be applied in the research context and propose that such application, or 'research continuity management,' enables a focused but wide-reaching approach to disaster preparedness.

Novel antimicrobial compounds from microbial sources

USDA-ARS?s Scientific Manuscript database

The use of antibiotics for agricultural and industrial applications is a controversial practice. In food animal production, antibiotics are widely administered through medicated feed to treat subclinical infections, as well as to prevent the spread of disease throughout the herd or flock. Antibiotic...

Infrastructure Investment Protection with LiDAR

DOT National Transportation Integrated Search

2012-10-15

The primary goal of this research effort was to explore the wide variety of uses of LiDAR technology and to evaluate their : applicability to NCDOT practices. NCDOT can use this information about LiDAR in determining how and when the : technology can...

Development and Application of a Structural Health Monitoring System Based on Wireless Smart Aggregates

PubMed Central

Ma, Haoyan; Li, Peng; Song, Gangbing; Wu, Jianxin

2017-01-01

Structural health monitoring (SHM) systems can improve the safety and reliability of structures, reduce maintenance costs, and extend service life. Research on concrete SHMs using piezoelectric-based smart aggregates have reached great achievements. However, the newly developed techniques have not been widely applied in practical engineering, largely due to the wiring problems associated with large-scale structural health monitoring. The cumbersome wiring requires much material and labor work, and more importantly, the associated maintenance work is also very heavy. Targeting a practical large scale concrete crack detection (CCD) application, a smart aggregates-based wireless sensor network system is proposed for the CCD application. The developed CCD system uses Zigbee 802.15.4 protocols, and is able to perform dynamic stress monitoring, structural impact capturing, and internal crack detection. The system has been experimentally validated, and the experimental results demonstrated the effectiveness of the proposed system. This work provides important support for practical CCD applications using wireless smart aggregates. PMID:28714927

Development and Application of a Structural Health Monitoring System Based on Wireless Smart Aggregates.

PubMed

Yan, Shi; Ma, Haoyan; Li, Peng; Song, Gangbing; Wu, Jianxin

2017-07-17

Structural health monitoring (SHM) systems can improve the safety and reliability of structures, reduce maintenance costs, and extend service life. Research on concrete SHMs using piezoelectric-based smart aggregates have reached great achievements. However, the newly developed techniques have not been widely applied in practical engineering, largely due to the wiring problems associated with large-scale structural health monitoring. The cumbersome wiring requires much material and labor work, and more importantly, the associated maintenance work is also very heavy. Targeting a practical large scale concrete crack detection (CCD) application, a smart aggregates-based wireless sensor network system is proposed for the CCD application. The developed CCD system uses Zigbee 802.15.4 protocols, and is able to perform dynamic stress monitoring, structural impact capturing, and internal crack detection. The system has been experimentally validated, and the experimental results demonstrated the effectiveness of the proposed system. This work provides important support for practical CCD applications using wireless smart aggregates.

SNR Degradation in Undersampled Phase Measurement Systems

PubMed Central

Salido-Monzú, David; Meca-Meca, Francisco J.; Martín-Gorostiza, Ernesto; Lázaro-Galilea, José L.

2016-01-01

A wide range of measuring applications rely on phase estimation on sinusoidal signals. These systems, where the estimation is mainly implemented in the digital domain, can generally benefit from the use of undersampling to reduce the digitizer and subsequent digital processing requirements. This may be crucial when the application characteristics necessarily imply a simple and inexpensive sensor. However, practical limitations related to the phase stability of the band-pass filter prior digitization establish restrictions to the reduction of noise bandwidth. Due to this, the undersampling intensity is practically defined by noise aliasing, taking into account the amount of signal-to-noise ratio (SNR) reduction caused by it considering the application accuracy requirements. This work analyzes the relationship between undersampling frequency and SNR reduction, conditioned by the stability requirements of the filter that defines the noise bandwidth before digitization. The effect of undersampling is quantified in a practical situation where phase differences are measured by in-phase and quadrature (I/Q) demodulation for an infrared ranging application. PMID:27783033

Survey points to practices that reduce refinery maintenance spending

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ricketts, R.

During the past decade, Solomon Associates Inc., Dallas, has conducted several comparative analyses of maintenance costs in the refining industry. These investigations have brought to light maintenance practices and reliability improvement activities that are responsible for the wide range of maintenance costs recorded by refineries. Some of the practices are of an organizational nature and thus are of interest to managers reviewing their operations. The paper discusses maintenance costs; profitability; cost trends; equipment availability; funds application; two basic organizational approached to maintenance (repair-focused organization and reliability-focused organization); low-cost practices; and organizational style.

The research-practice relationship in ergonomics and human factors--surveying and bridging the gap.

PubMed

Chung, Amy Z Q; Shorrock, Steven T

2011-05-01

Significant discord has been aired regarding the widening research-practice gap in several disciplines (e.g. psychology, healthcare), especially with reference to research published in academic journals. The research-practice gap has profound and wide-ranging implications for the adequacy of ergonomics and human factors (E/HF) research and the implementation of research findings into practice. However, no substantive research on this issue has been identified in E/HF. Using an online questionnaire, practitioners were asked about their application of scientific research findings published in peer-reviewed journals and to suggest ways to improve research application in practice. A total of 587 usable responses were collected, spanning 46 countries. This article describes some of the key differences and correlations concerning reading, usefulness and barriers to application among respondents, who varied in terms of organisational type, percentage of work time devoted to application vs. research, society membership and experience. Various solutions proposed by the survey respondents on ways to bridge the research-practice gap are discussed. STATEMENT OF RELEVANCE: The relationship between research and practice in E/HF has long been a subject of discussion, with commentators pointing to tension and possible implications for the adequacy of the discipline. Findings from a cross-sectional survey provide ergonomics practitioners' views on research, leading to discussion of strategies for achieving better integration.

Social marketing: an overview of approach and effects

PubMed Central

Smith, W A

2006-01-01

This paper reviews the applicability of commercial and social marketing to teen driving safety. It draws on a wide range of information, including evaluation studies of specific programs as well as standards of practice within these two professions. Social marketing has been widely applied for more than three decades in the fields of public health, environmental protection, and political marketing with significant success. The paper attempts to distinguish between the practice of commercial marketing, whose goal is profit, and the practice of social marketing, whose goal is societal benefit. Issues of sustainability, segmentation, differences in behavioral characteristics, and cultural competence are discussed with specific examples drawn from the transportation safety literature. The paper suggests that social marketing represents a viable companion to control and education approaches to behavior change to promote teen driving safety. PMID:16788110

Decade of Change.

ERIC Educational Resources Information Center

Hunter, Leslie Gene

1995-01-01

Discusses advancements in the field of history-related computer-assisted instruction and research. Describes the components of Historiography and Methods of Research, a class that introduces history students to such practical applications as the World Wide Web (WWW), File Transfer Protocol (FTP), listservs, archival access, and others. Briefly…

Laser applications to chemical analysis: an introduction by the feature editors

NASA Astrophysics Data System (ADS)

Jeffries, Jay B.; Ramsey, J. Michael; Lucht, Robert P.

1995-06-01

This issue of Applied Optics features papers on the application of laser technology to chemical analysis. Many of the contributions, although not all, result from papers presented at the Fourth OSA Topical Meeting on Laser Applications to Chemical Analysis, which was held at Jackson Hole, Wyoming, March, 1994. This successful meeting, with nearly one hundred participants, continued the tradition of earlier LACA meetings to focus on the optical science of laser-based measurements of temperature and trace chemical assays in a wide variety of practical applications.

Standby-battery autonomy versus power quality

NASA Astrophysics Data System (ADS)

Bitterlin, Ian F.

Batteries are used in a wide variety of applications as an energy store to bridge gaps in the primary source of supplied power for a given period of time. In some cases this bridging time, the battery's "autonomy", is fixed by local legislation but it is also often set by historically common practices. However, even if common practice dictates a long autonomy time, we are entering a new era of "cost and benefit realism" underpinned by environmentally friendly policies and we should challenge these historical practices at every opportunity if it can lead to resource and cost savings. In some cases the application engineer has no choice in the design autonomy; either follow a piece of local legislation (e.g. 4 h autonomy for a "life safety" application), or actually work out what is needed! An example of the latter would be for a remote site, off-grid, using integrated wind/solar power (without emergency generator back-up) where you may have to design-in several days' battery autonomy. This short paper proposes that a battery's autonomy should be related to the time expected for the system to be without the primary power source, balanced by the capital costs and commercial risk of power failure. To discuss this we shall consider the factors in selecting the autonomy time and other related aspects for high voltage battery systems used in facility-wide uninterruptible power supply (UPS) systems.

The mechanism and design of sequencing batch reactor systems for nutrient removal--the state of the art.

PubMed

Artan, N; Wilderer, P; Orhon, D; Morgenroth, E; Ozgür, N

2001-01-01

The Sequencing Batch Reactor (SBR) process for carbon and nutrient removal is subject to extensive research, and it is finding a wider application in full-scale installations. Despite the growing popularity, however, a widely accepted approach to process analysis and modeling, a unified design basis, and even a common terminology are still lacking; this situation is now regarded as the major obstacle hindering broader practical application of the SBR. In this paper a rational dimensioning approach is proposed for nutrient removal SBRs based on scientific information on process stoichiometry and modelling, also emphasizing practical constraints in design and operation.

Toolkit of Available EPA Green Infrastructure Modeling Software: Watershed Management Optimization Support Tool (WMOST)

EPA Science Inventory

Watershed Management Optimization Support Tool (WMOST) is a software application designed tofacilitate integrated water resources management across wet and dry climate regions. It allows waterresources managers and planners to screen a wide range of practices across their watersh...

TRACE ORGANICS AND INORGANICS IN DISTRIBUTION AND MARKETING MUNICIPAL SLUDGES

EPA Science Inventory

The land application of municipal wastewater treatment sludges is widely practiced both as an economic treatment method for disposal and to provide an economic soil nutrient amendment for agricultural use. Concerns over the general disposal of sludge to land have focused on sever...

A practical approach in porous medium combustion for domestic application: A review

NASA Astrophysics Data System (ADS)

Ismail, A. K.; Ibrahim, N. H.; Shamsuddin, K. A.; Abdullah, M. Z.; Zubair, M.

2018-05-01

Combustion in porous media has been widely studied. Many application involving the combustion of porous media has been reported in various way with most consider on numerical works and industrial application. Besides, recent application of porous medium combustion for domestic is the topic of interest among researchers. In this paper, a review was conducted on the combustion of porous media in term of practical application for domestic consumers. Details on the type of fuel used including bio fuel and their system have been search thoroughly. Most of the system have utilized compressed air system to provide lean combustion in domestic application. Some self-aspirating system of porous medium burner was also reported. The application of new technology such as cogeneration by using thermoelectric cells in tandem with porous medium combustion is also revised according to recent work which have already been published. Besides, the recent advances which include coating of porous material is also considered at the end of this paper.

Meta-analysis for genome-wide association studies using case-control design: application and practice

PubMed Central

2016-01-01

This review aimed to arrange the process of a systematic review of genome-wide association studies in order to practice and apply a genome-wide meta-analysis (GWMA). The process has a series of five steps: searching and selection, extraction of related information, evaluation of validity, meta-analysis by type of genetic model, and evaluation of heterogeneity. In contrast to intervention meta-analyses, GWMA has to evaluate the Hardy–Weinberg equilibrium (HWE) in the third step and conduct meta-analyses by five potential genetic models, including dominant, recessive, homozygote contrast, heterozygote contrast, and allelic contrast in the fourth step. The ‘genhwcci’ and ‘metan’ commands of STATA software evaluate the HWE and calculate a summary effect size, respectively. A meta-regression using the ‘metareg’ command of STATA should be conducted to evaluate related factors of heterogeneities. PMID:28092928

A review and a framework of handheld computer adoption in healthcare.

PubMed

Lu, Yen-Chiao; Xiao, Yan; Sears, Andrew; Jacko, Julie A

2005-06-01

Wide adoption of mobile computing technology can potentially improve information access, enhance workflow, and promote evidence-based practice to make informed and effective decisions at the point of care. Handheld computers or personal digital assistants (PDAs) offer portable and unobtrusive access to clinical data and relevant information at the point of care. This article reviews the literature on issues related to adoption of PDAs in health care and barriers to PDA adoption. Studies showed that PDAs were used widely in health care providers' practice, and the level of use is expected to rise rapidly. Most care providers found PDAs to be functional and useful in areas of documentation, medical reference, and access to patient data. Major barriers to adoption were identified as usability, security concerns, and lack of technical and organizational support. PDAs offer health care practitioners advantages to enhance their clinical practice. However, better designed PDA hardware and software applications, more institutional support, seamless integration of PDA technology with hospital information systems, and satisfactory security measures are necessary to increase acceptance and wide use of PDAs in healthcare.

Point symmetric design approach to a wide-field wide-wavelength cat's eye retro-reflector anastigmat

NASA Astrophysics Data System (ADS)

Liepmann, Till W.

2009-08-01

A point symmetric design approach for creating a practical cat's eye retro-reflector (CERR) anastigmat lens with a wide field of regard (FOR), uniform reflectance and wide wavelength range is described. An anastigmat design is presented that demonstrates the performance capability of the design approach. The lens design is diffraction limited in double pass at F/3, has a "working distance" between lens and reflector, wide wavelength range of operation, and uniform reflectivity over a 120 deg FOR. An anastigmat fabricated from the design is presented; however, the design approach is generally useful for any application requiring a high performance retro-reflector. The design uses only spherical surfaces, thereby avoiding the fabrication expense of aspheric surfaces.

High-intensity laser application in Orthodontics.

PubMed

Sant'Anna, Eduardo Franzotti; Araújo, Mônica Tirre de Souza; Nojima, Lincoln Issamu; Cunha, Amanda Carneiro da; Silveira, Bruno Lopes da; Marquezan, Mariana

2017-01-01

In dental practice, low-level laser therapy (LLLT) and high-intensity laser therapy (HILT) are mainly used for dental surgery and biostimulation therapy. Within the Orthodontic specialty, while LLLT has been widely used to treat pain associated with orthodontic movement, accelerate bone regeneration after rapid maxillary expansion, and enhance orthodontic tooth movement, HILT, in turn, has been seen as an alternative for addressing soft tissue complications associated to orthodontic treatment. The aim of this study is to discuss HILT applications in orthodontic treatment. This study describes the use of HILT in surgical treatments such as gingivectomy, ulotomy, ulectomy, fiberotomy, labial and lingual frenectomies, as well as hard tissue and other dental restorative materials applications. Despite the many applications for lasers in Orthodontics, they are still underused by Brazilian practitioners. However, it is quite likely that this demand will increase over the next years - following the trend in the USA, where laser therapies are more widely used.

Geophysical Sensing Applications on Claypan Soils

USDA-ARS?s Scientific Manuscript database

Maps of apparent electrical conductivity (ECa) of the soil profile are widely used in precision agriculture practice and research. A number of ECa sensors are commercially available, each with a unique response function (i.e., the relative contribution of soil at each depth to the integrated ECa rea...

Current status of practical applications: Probiotics in dairy cattle

USDA-ARS?s Scientific Manuscript database

The gastrointestinal microbial population of dairy cattle is dense and diverse, and can be utilized to reduce pathogenic bacterial populations as well as improve animal productivity and environmental impacts. Because of the nature of the dairy industry, probiotic products have been widely used to e...

Highly effective copper-mediated gem-difluoromethylenation of arylboronic acids.

PubMed

Ma, Guobin; Wan, Wen; Hu, Qingyang; Jiang, Haizhen; Wang, Jing; Zhu, Shizheng; Hao, Jian

2014-07-18

A copper-mediated gem-difluoromethylenation of aryl, heteroaryl and vinyl boronic acids with bromodifluoromethylated oxazole or thiazole derivatives has been developed. This novel reaction showed an excellent functional group tolerance and wide substrate scope, providing facile access to practical application in drug discovery and development.

Mindful Learning: Why Attention Matters in Education

ERIC Educational Resources Information Center

Hassed, Craig

2016-01-01

Mindfulness is a generic skill with a wide range of applications relevant to education. These include fostering mental health; improving communication, empathy, and emotional development, improving physical health; and enhancing learning and performance. This article will give a brief overview of the science, practice, and philosophy of…

Identifying Cost-Effective Water Resources Management Strategies: Watershed Management Optimization Support Tool (WMOST)

EPA Science Inventory

The Watershed Management Optimization Support Tool (WMOST) is a public-domain software application designed to aid decision makers with integrated water resources management. The tool allows water resource managers and planners to screen a wide-range of management practices for c...

Sharing tools and best practice in Global Sensitivity Analysis within academia and with industry

NASA Astrophysics Data System (ADS)

Wagener, T.; Pianosi, F.; Noacco, V.; Sarrazin, F.

2017-12-01

We have spent years trying to improve the use of global sensitivity analysis (GSA) in earth and environmental modelling. Our efforts included (1) the development of tools that provide easy access to widely used GSA methods, (2) the definition of workflows so that best practice is shared in an accessible way, and (3) the development of algorithms to close gaps in available GSA methods (such as moment independent strategies) and to make GSA applications more robust (such as convergence criteria). These elements have been combined in our GSA Toolbox, called SAFE (www.safetoolbox.info), which has up to now been adopted by over 1000 (largely) academic users worldwide. However, despite growing uptake in academic circles and across a wide range of application areas, transfer to industry applications has been difficult. Initial market research regarding opportunities and barriers for uptake revealed a large potential market, but also highlighted a significant lack of knowledge regarding state-of-the-art methods and their potential value for end-users. We will present examples and discuss our experience so far in trying to overcome these problems and move beyond academia in distributing GSA tools and expertise.

Personal data assistants: using new technology to enhance nursing practice.

PubMed

Lewis, Judith A; Sommers, Catherine O

2003-01-01

This article explains how the new technology of personal data assistants can be used to enhance and augment comprehensive nursing care. Nurses are constantly challenged in their need for current, reliable, and accurate information at the point of patient care. Professional books and journals, by the very nature of their print format, have been prepared long before they can be actually used in practice. More current information is available from the World Wide Web, but it is often impractical for a nurse to access a computer during a patient encounter. Personal data assistants [PDAs] allow clinicians to access and document absolutely current information at the moment the patient is being seen. There are many general applications for PDAs that nurses might use such as keeping electronic calendars, address books, and reminder lists. In addition, however, there are even more actual healthcare applications, including patient tracking systems, access to pharmacologic databases, and a variety of clinical decision-making support tools. This article describes the wide variety of PDAs, along with the factors a nurse should consider in the decision of whether to purchase a PDA, and which type of device is best suited for which application.

Considerations for safe glucocorticoid therapy

PubMed

2018-06-01

Synthetic glucocorticoids have innumerable therapeutic applications and are frequently used in medical practice. Changes in the wide variety of synthetic molecules and the different routes of administration cause differences in anti-inflammatory action, therapeutic action and mineralocorticoid effects. Endocrinologists are generally consulted to evaluate the gradual decline in treatment, rather than to indicate it. We present general information and practical advice to the pediatrician to minimize the adverse effects and considerations to be taken into account for the suspension of treatment.

Application of best practice guidelines for OSCEs-An Australian evaluation of their feasibility and value.

PubMed

Mitchell, Marion L; Henderson, Amanda; Jeffrey, Carol; Nulty, Duncan; Groves, Michele; Kelly, Michelle; Knight, Sabina; Glover, Pauline

2015-05-01

Objective Structured Clinical Examinations (OSCEs) are widely used in health professional education and should be based on sound pedagogical foundations. The aim of this study is to evaluate the feasibility and utility of using Best Practice Guidelines (BPGs) within an OSCE format in a broad range of tertiary education settings with under-graduate and post-graduate nursing and midwifery students. We evaluated how feasible it was to apply the BPGs to modify OSCEs in a course; students' perspective of the OSCE; and finally, if the BPG-revised OSCEs better prepared students for clinical practice when compared with the original OSCEs. A mixed method with surveys, focus groups and semi-structured interviews evaluated the BPGs within an OSCE. Four maximally different contexts across four sites in Australia were used. Participants included lecturers and undergraduate nursing students in high and low fidelity simulation settings; under-graduate midwifery students; and post-graduate rural and remote area nursing students. 691 students participated in revised OSCEs. Surveys were completed by 557 students; 91 students gave further feedback through focus groups and 14 lecturers participated in interviews. At all sites the BPGs were successfully used to modify and implement OSCEs. Students valued the realistic nature of the modified OSCEs which contributed to students' confidence and preparation for clinical practice. The lecturers considered the revised OSCEs enhanced student preparedness for their clinical placements. The BPGs have a broad applicability to OSCEs in a wide range of educational contexts with improved student outcomes. Students and lecturers identified the revised OSCEs enhanced student preparation for clinical practice. Subsequent examination of the BPGs saw further refinement to a set of eight BPGs that provide a sequential guide to their application in a way that is consistent with best practice curriculum design principles. Copyright © 2015 Elsevier Ltd. All rights reserved.

Computer vision for general purpose visual inspection: a fuzzy logic approach

NASA Astrophysics Data System (ADS)

Chen, Y. H.

In automatic visual industrial inspection, computer vision systems have been widely used. Such systems are often application specific, and therefore require domain knowledge in order to have a successful implementation. Since visual inspection can be viewed as a decision making process, it is argued that the integration of fuzzy logic analysis and computer vision systems provides a practical approach to general purpose visual inspection applications. This paper describes the development of an integrated fuzzy-rule-based automatic visual inspection system. Domain knowledge about a particular application is represented as a set of fuzzy rules. From the status of predefined fuzzy variables, the set of fuzzy rules are defuzzified to give the inspection results. A practical application where IC marks (often in the forms of English characters and a company logo) inspection is demonstrated, which shows a more consistent result as compared to a conventional thresholding method.

Efficient hash tables for network applications.

PubMed

Zink, Thomas; Waldvogel, Marcel

2015-01-01

Hashing has yet to be widely accepted as a component of hard real-time systems and hardware implementations, due to still existing prejudices concerning the unpredictability of space and time requirements resulting from collisions. While in theory perfect hashing can provide optimal mapping, in practice, finding a perfect hash function is too expensive, especially in the context of high-speed applications. The introduction of hashing with multiple choices, d-left hashing and probabilistic table summaries, has caused a shift towards deterministic DRAM access. However, high amounts of rare and expensive high-speed SRAM need to be traded off for predictability, which is infeasible for many applications. In this paper we show that previous suggestions suffer from the false precondition of full generality. Our approach exploits four individual degrees of freedom available in many practical applications, especially hardware and high-speed lookups. This reduces the requirement of on-chip memory up to an order of magnitude and guarantees constant lookup and update time at the cost of only minute amounts of additional hardware. Our design makes efficient hash table implementations cheaper, more predictable, and more practical.

Tracking antibiotic resistance genes in soil irrigated with dairy wastewater

USDA-ARS?s Scientific Manuscript database

In southern Idaho, the application of dairy wastewater to agricultural soils is a widely used practice to irrigate crops and recycle nutrients. In this study, small-scale field plots were irrigated monthly (6 times) with dairy wastewater (100%), wastewater diluted to 50% with irrigation (canal) wate...

A new tool that links landscale connectivity and source-sink dynamics to population viability

EPA Science Inventory

The importance of connectivity and source-sink dynamics to conservation planning is widely appreciated. But the use of these concepts in practical applications such as the identification of critical habitat has been slowed because few models are designed to identify demographic s...

"Social Learning" Buzz Masks Deeper Dimensions: Mitigating the Confusion Surrounding "Social Learning"

ERIC Educational Resources Information Center

Ganis, Frank

2009-01-01

There is a century of rich literature on social learning from the fields of education, psychology, and sociology characterizing a wide variety of practical applications such as instructional techniques, consumer behavior conditioning and determining criminal motives. In social learning theory, according to Bandura, there are four fundamental…

Handbook of Art Therapy. Second Edition

ERIC Educational Resources Information Center

Malchiodi, Cathy A., Ed.

2011-01-01

Providing a complete overview of art therapy, from theory and research to practical applications, this is the definitive handbook in the field. Leading practitioners demonstrate the nuts and bolts of arts-based intervention with children, adults, families, couples, and groups dealing with a wide range of clinical issues. Rich with illustrative…

Handheld Computers in Education. Research Brief

ERIC Educational Resources Information Center

Education Partnerships, Inc., 2003

2003-01-01

For over the last 20 years, educators have been trying to find the best practice in using technology for student learning. Some of the most widely used applications with computers have been student learning of programming, word processing, Web research, spreadsheets, games, and Web design. The difficulty with integrating many of these activities…

Fanon and the Child: Pedagogies of Subjectification and Transformation

ERIC Educational Resources Information Center

Burman, Erica

2016-01-01

Frantz Fanon's analysis of colonial experience has widely influenced educational theory and practice. Yet, despite much focus on the gendered and sexed dynamics of racialization processes, and their applications to the dynamics in particular of teaching and learning, surprisingly little attention has been given to how these intersect both with…

Nutrient Uptake and Outcome network (NUOnet): Connecting a Wide Range of Natural Resource Conservation Networks

USDA-ARS?s Scientific Manuscript database

Nutrient application and its uptake by crops are essential to increasing agricultural production, which is essential to feed a growing world population. Efficiency in management of nutrients could be increased with conservation practices that reduce nutrient losses to the environment and promote con...

New developments in social interdependence theory.

PubMed

Johnson, David W; Johnson, Roger T

2005-11-01

Social interdependence theory is a classic example of the interaction of theory, research, and practice. The premise of the theory is the way that goals are structured determines how individuals interact, which in turn creates outcomes. Since its formulation nearly 60 years ago, social interdependence theory has been modified, extended, and refined on the basis of the increasing knowledge about, and application of, the theory. Researchers have conducted over 750 research studies on the relative merits of cooperative, competitive, and individualistic efforts and the conditions under which each is appropriate. Social interdependence theory has been widely applied, especially in education and business. These applications have resulted in revisions of the theory and the generation of considerable new research. The authors critically analyze the new developments resulting from extensive research on, and wide-scale applications of, social interdependence theory.

"Nonsolvent" applications of ionic liquids in biotransformations and organocatalysis.

PubMed

Domínguez de María, Pablo

2008-01-01

The application of room-temperature ionic liquids (RTILs) as (co)solvents and/or reagents is well documented. However, RTILS also have "nonsolvent" applications in biotransformations and organocatalysis. Examples are the anchoring of substrates to RTILs; ionic-liquid-coated enzymes (ILCE) and enzyme-IL colyophilization; the construction of biocatalytic ternary reaction systems; the combination of enzymes, RTILs, membranes, and (bio)electrochemistry; and ionic-liquid-supported organocatalysts. These strategies provide more robust, more efficient, and more enantioselective bio- and organocatalysts with many practical applications. As shown herein, RTILs offer a wide range of promising alternatives to conventional chemistry.

Ambroise Paré (1510-1590) and His Innovative Work on the Treatment of War Injuries.

PubMed

Markatos, Konstantinos; Tzivra, Anna; Tsoutsos, Spyridon; Tsourouflis, Gerasimos; Karamanou, Marianna; Androutsos, Georgios

2018-04-01

The purpose of this study is to summarize the innovations of Ambroise Paré (1510-1590) on the treatment of war wounds and improving amputation technique through ligature in arteries and veins. Ambroise Paré debunked the widely accepted idea that gun powder was poisonous for wounds. He also minimized the use of cautery of wounds by his dressing methods and the application of ligature during amputations. All these innovative rationales revolutionized the practice of war surgery during the Renaissance and paved the way for the introduction of modern surgery. Nevertheless, although his wound dressing innovations became widely accepted, the same did not happen with ligature and amputation; those techniques could become widely applicable if one could somehow control bleeding until the blood vessels had been tied. This became possible much later in the 18th century when Jean Louis Petit invented the first useful and efficient tourniquet.

High-Temperature Electronics: A Role for Wide Bandgap Semiconductors?

NASA Technical Reports Server (NTRS)

Neudeck, Philip G.; Okojie, Robert S.; Chen, Liang-Yu

2002-01-01

It is increasingly recognized that semiconductor based electronics that can function at ambient temperatures higher than 150 C without external cooling could greatly benefit a variety of important applications, especially-in the automotive, aerospace, and energy production industries. The fact that wide bandgap semiconductors are capable of electronic functionality at much higher temperatures than silicon has partially fueled their development, particularly in the case of SiC. It appears unlikely that wide bandgap semiconductor devices will find much use in low-power transistor applications until the ambient temperature exceeds approximately 300 C, as commercially available silicon and silicon-on-insulator technologies are already satisfying requirements for digital and analog very large scale integrated circuits in this temperature range. However, practical operation of silicon power devices at ambient temperatures above 200 C appears problematic, as self-heating at higher power levels results in high internal junction temperatures and leakages. Thus, most electronic subsystems that simultaneously require high-temperature and high-power operation will necessarily be realized using wide bandgap devices, once the technology for realizing these devices become sufficiently developed that they become widely available. Technological challenges impeding the realization of beneficial wide bandgap high ambient temperature electronics, including material growth, contacts, and packaging, are briefly discussed.

Practical small-scale explosive seam welding

NASA Technical Reports Server (NTRS)

Bement, L. J.

1983-01-01

Joining principles and variables, types of joints, capabilities, and current and potential applications are described for an explosive seam welding process developed at NASA Langley Research Center. Variable small quantities of RDX explosive in a ribbon configuration are used to create narrow (less than 0.5 inch), long length, uniform, hermetrically sealed joints that exhibit parent metal properties in a wide variety of metals, alloys, and combinations. The first major all application of the process is the repair of four nuclear reactors in Canada. Potential applications include pipelines, sealing of vessels, and assembly of large space structures.

Plastic and reconstructive robotic microsurgery--a review of current practices.

PubMed

Saleh, D B; Syed, M; Kulendren, D; Ramakrishnan, V; Liverneaux, P A

2015-08-01

We sought to review the current state of robotics in this specialty. A Pubmed and Medline search was performed using key search terms for a comprehensive review of the whole cross-section of plastic and reconstructive practice. Overall, 28 publications specific to robotic plastic and reconstructive procedures were suitable for appraisal. The current evidence suggests robotics is comparable to standard methods despite its infancy. The possible applications are wide and could translate into superior patient outcomes. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Predictors of vaginal practices for sex and hygiene in KwaZulu-Natal, South Africa: findings of a household survey and qualitative inquiry.

PubMed

Scorgie, Fiona; Smit, Jennifer A; Kunene, Busisiwe; Martin-Hilber, Adriane; Beksinska, Mags; Chersich, Matthew F

2011-04-01

Vaginal practices in sub-Saharan Africa may increase HIV transmission and have important implications for development of microbicides and future HIV prevention technologies. It remains unclear which women undertake vaginal practices and what factors predict prevalence, practice type and choice of products. Using cross-sectional data from mixed research methods, we identify factors associated with vaginal practices among women in KwaZulu-Natal, South Africa. Data were gathered through focus group discussions, in-depth and key-informant interviews, followed by a province-wide, multi-stage cluster household survey, using structured questionnaires in face-to-face interviews with 867 women. This paper details six types of vaginal practices, which--despite their individual distinctiveness and diverse motivations--may be clustered into two broad groups: those undertaken for purposes of 'hygiene' (genital washing, douching and application) and those for 'sexual motivations' (application, insertion, ingestion and incisions). Multivariate analysis found significant associations between 'hygiene' practices and media access, religiosity and transactional sex. 'Sexual' practices were associated with partner concurrency, religiosity and use of injectable hormonal contraceptives. Future interventions relating to vaginal practices as well as microbicides need to reflect this characterisation of practices as sexual- and/or hygiene-related.

Nonlinear dissipative devices in structural vibration control: A review

NASA Astrophysics Data System (ADS)

Lu, Zheng; Wang, Zixin; Zhou, Ying; Lu, Xilin

2018-06-01

Structural vibration is a common phenomenon existing in various engineering fields such as machinery, aerospace, and civil engineering. It should be noted that the effective suppression of structural vibration is conducive to enhancing machine performance, prolonging the service life of devices, and promoting the safety and comfort of structures. Conventional linear energy dissipative devices (linear dampers) are largely restricted for wider application owing to their low performance under certain conditions, such as the detuning effect of tuned mass dampers subjected to nonstationary excitations and the excessively large forces generated in linear viscous dampers at high velocities. Recently, nonlinear energy dissipative devices (nonlinear dampers) with broadband response and high robustness are being increasingly used in practical engineering. At the present stage, nonlinear dampers can be classified into three groups, namely nonlinear stiffness dampers, nonlinear-stiffness nonlinear-damping dampers, and nonlinear damping dampers. Corresponding to each nonlinear group, three types of nonlinear dampers that are widely utilized in practical engineering are reviewed in this paper: the nonlinear energy sink (NES), particle impact damper (PID), and nonlinear viscous damper (NVD), respectively. The basic concepts, research status, engineering applications, and design approaches of these three types of nonlinear dampers are summarized. A comparison between their advantages and disadvantages in practical engineering applications is also conducted, to provide a reference source for practical applications and new research.

Electromagnetic Nanoparticles for Sensing and Medical Diagnostic Applications

PubMed Central

Vegni, Lucio

2018-01-01

A modeling and design approach is proposed for nanoparticle-based electromagnetic devices. First, the structure properties were analytically studied using Maxwell’s equations. The method provides us a robust link between nanoparticles electromagnetic response (amplitude and phase) and their geometrical characteristics (shape, geometry, and dimensions). Secondly, new designs based on “metamaterial” concept are proposed, demonstrating great performances in terms of wide-angle range functionality and multi/wide behavior, compared to conventional devices working at the same frequencies. The approach offers potential applications to build-up new advanced platforms for sensing and medical diagnostics. Therefore, in the final part of the article, some practical examples are reported such as cancer detection, water content measurements, chemical analysis, glucose concentration measurements and blood diseases monitoring. PMID:29652853

Field-testing the new DECtalk PC system for medical applications

NASA Technical Reports Server (NTRS)

Grams, R. R.; Smillov, A.; Li, B.

1992-01-01

Synthesized human speech has now reached a new level of performance. With the introduction of DEC's new DECtalk PC, the small system developer will have a very powerful tool for creative design. It has been our privilege to be involved in the beta-testing of this new device and to add a medical dictionary which covers a wide range of medical terminology. With the inherent board level understanding of speech synthesis and the medical dictionary, it is now possible to provide full digital speech output for all medical files and terms. The application of these tools will cover a wide range of options for the future and allow a new dimension in dealing with the complex user interface experienced in medical practice.

75 FR 81274 - Media and Wireless Telecommunications Bureaus Seek Comment on Recommendation of the Advisory...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-27

..., similar to its existing practice of establishing the small business definitions on a service-by-service... to disseminate licenses among ``a wide variety of applicants, including small businesses, rural telephone companies, and businesses owned by members of minority groups and women'' and to ``ensure that...

Peer-Teaching in the Secondary Music Ensemble

ERIC Educational Resources Information Center

Johnson, Erik

2015-01-01

Peer-teaching is an instructional technique that has been used by teachers world-wide to successfully engage, exercise and deepen student learning. Yet, in some instances, teachers find the application of peer-teaching in large music ensembles at the secondary level to be daunting. This article is meant to be a practical resource for secondary…

Reflective Practice through Journal Writing and Peer Observation: A Case Study

ERIC Educational Resources Information Center

Lakshmi, B. Samrajya

2014-01-01

Journal writing and Peer Observation in an educational context have become popular techniques, with several different types of applications. They have now been used quite widely in both language teaching and in teacher training. However, despite its reported advantages in both teaching and research, there are not many Peer Observation and Diary…

The Essence of Teacher Leadership: A Phenomenological Inquiry of Professional Growth

ERIC Educational Resources Information Center

Lowery-Moore, Hollis; Latimer, Robin M.; Villate, Vanessa M.

2016-01-01

Teacher leadership is a key to school reform (Fullan, 2005), yet it is not a widely practiced educational application (Crowther, 2009). Collay (2006) called for education faculty to assist teachers in developing powerful professional identities, but in order for university faculty to become partners in preparing teacher leaders, programs must…

Bioinformatics: Current Practice and Future Challenges for Life Science Education

ERIC Educational Resources Information Center

Hack, Catherine; Kendall, Gary

2005-01-01

It is widely predicted that the application of high-throughput technologies to the quantification and identification of biological molecules will cause a paradigm shift in the life sciences. However, if the biosciences are to evolve from a predominantly descriptive discipline to an information science, practitioners will require enhanced skills in…

Diversity in Information Technology Education: Issues and Controversies

ERIC Educational Resources Information Center

Trajkovski, Goran, Ed.

2006-01-01

"Diversity in Information Technology Education: Issues and Controversies" sheds light on the status of diversity in the field of IT education. It identifies a wide range of problems that educators face on a daily basis, and gives practical, applicable solutions, mainly by showcasing successful and replicable examples. The chapters in "Diversity in…

Implementing Randomised Control Trials in Open and Distance Learning: A Feasibility Study

ERIC Educational Resources Information Center

Herodotou, Christothea; Heiser, Sarah; Rienties, Bart

2017-01-01

Randomised control trials (RCTs) are an evidence-based research approach which has not yet been adopted and widely used in open and distance education to inform educational policy and practice. Despite the challenges entailed in their application, RCTs hold the power to robustly evaluate the effects of educational interventions in distance…

Serious Fun: Viewing Hobbyist Activities through a Learning Lens

ERIC Educational Resources Information Center

Liu, Chi-Chang; Falk, John H.

2014-01-01

This paper reviews a wide range of literature applicable to understanding why and how hobbyists learn. Of particular importance appear to be theories such as situated learning and communities of practice, but insights from the cognitive sciences related to expertise, motivation, and interest also emerged as important. The boundaries between formal…

Integrated Pest Management.

ERIC Educational Resources Information Center

Council on Environmental Quality, Washington, DC.

After a brief discussion of the problems of pesticide use and the status of current pest control practices, a definition of integrated pest management is given along with some examples of its successful application, and a description of some of the reasons why the concept has not been applied more widely. The major techniques which can be used as…

Expected irrigation reductions using multiple-inlet rice irrigation under rainfall conditions in the lower Mississippi River Valley.

USDA-ARS?s Scientific Manuscript database

A model was developed to compare irrigation applications made using single-inlet and multiple-inlet rice flood distribution practices commonly used in the Lower Mississippi River Valley. The model was used to determine potential irrigation reductions under a wide range of natural rainfall amounts an...

NASCAR Winston Cup Race Results for 1975-2003

ERIC Educational Resources Information Center

Winner, Larry

2006-01-01

Stock car racing has seen tremendous growth in popularity in recent years. We introduce two datasets containing results from all Winston Cup races between 1975 and 2003, inclusive. Students can use any number of statistical methods and applications of basic probability on the data to answer a wide range of practical questions. Instructors and…

Cholinesterase-based biosensors.

PubMed

Štěpánková, Šárka; Vorčáková, Katarína

2016-01-01

Recently, cholinesterase-based biosensors are widely used for assaying anticholinergic compounds. Primarily biosensors based on enzyme inhibition are useful analytical tools for fast screening of inhibitors, such as organophosphates and carbamates. The present review is aimed at compilation of the most important facts about cholinesterase based biosensors, types of physico-chemical transduction, immobilization strategies and practical applications.

Flower Power: The Armoured Expert in the CanMEDS Competency Framework?

ERIC Educational Resources Information Center

Whitehead, Cynthia R.; Austin, Zubin; Hodges, Brian D.

2011-01-01

Competency frameworks based on roles definitions are currently being used extensively in health professions education internationally. One of the most successful and widely used models is the CanMEDS Roles Framework. The medical literature has raised questions about both the theoretical underpinnings and the practical application of outcomes-based…

Agile Manifesto for Teaching and Learning

ERIC Educational Resources Information Center

Krehbiel, Timothy C.; Salzarulo, Peter A.; Cosmah, Michelle L.; Forren, John; Gannod, Gerald; Havelka, Douglas; Hulshult, Andrea R.; Merhout, Jeffrey

2017-01-01

A group of faculty members representing six colleges at a public university formed a learning community to study the Agile Way of Working--a method of workplace collaboration widely used in software development--and to determine whether the concepts, practices, and benefits of Agile are applicable to higher education settings. After more than two…

Investigating the state of physiologically based kinetic modelling practices and challenges associated with gaining regulatory acceptance of model applications

EPA Science Inventory

Physiologically based kinetic (PBK) models are used widely throughout a number of working sectors, including academia and industry, to provide insight into the dosimetry related to observed adverse health effects in humans and other species. Use of these models has increased over...

Application of a Master Equation for Quantitative mRNA Analysis Using qRT-PCR

USDA-ARS?s Scientific Manuscript database

The qRT-PCR has been widely accepted as the assay of choice for mRNA quantification. Gene expression as measured by mRNA dynamics varies in response to different conditions and environmental stimuli. For conventional practice, housekeeping genes have been applied as internal reference for data nor...

Learning with Smartphones: Students' Lived Experience of Using Smartphones

ERIC Educational Resources Information Center

Chan, Nee Nee; Walker-Gleaves, Alan; Remedios, Richard

2013-01-01

With its wide-ranging applications and multiple features, the smartphone is propelling a new way of learning "on the fly". Mobile learning is more than simply learning with certain types of digital technologies: through everyday practices of using the smartphone, learning can take place in formal and informal settings and in the boundary…

The Challenge of the Internet: Practical Applications in Your 7-12 Classroom.

ERIC Educational Resources Information Center

Bertsche, Harriet; Silvestri, Holly

A series of both daily classroom activities and a long-term assignment in which secondary school language students actively use the Internet and the World Wide Web are described. Class activities target each of three proficiency levels (beginner, intermediate, advanced). They include having students check the weather, check out major…

Integrating Geospatial Technologies into Existing Teacher Education Coursework: Theoretical and Practical Notes from the Field

ERIC Educational Resources Information Center

Kerr, Stacey

2016-01-01

Although instruction related to learning management systems and other educational applications in teacher education programs has increased, the potential of geospatial technologies has yet to be widely explored and considered in the teacher education literature, despite its ability to function as an engaging pedagogical tool with teacher…

A Review of Application Building Information Modeling (BIM) During Pre-Construction Stage: Retrospective and Future Directions

NASA Astrophysics Data System (ADS)

Edra Nisa Lau, Santi; Zakaria, Rozana; Aminudin, Eeydzah; Saar, Chai Chang; Yusof, Aswadi; Fatihi Hafifi Che Wahid, Che Muhammad

2018-04-01

Pre-construction is one of the biggest areas of risk and uncertainty in construction project as it deals with subsurface ground conditions information. The amount of detail data needed in pre-construction especially for existing data modelling and site analysis should be sufficient enough to ensure that significant risks could not reasonably be anticipated. Current practicing method in interpreting data during this stage tasks reveal limitation. Construction industry faced many obstacles due to the depends on the traditional practice; paper-based document which missing and redundant data always happened. In recent years, there has been a shift in construction where people move to BIM application because of its potential to reduce the problem faced by infrastructure world. BIM has become a successful technology and widely popular in the construction world especially in developed countries because of its potential. Nowadays, people are moving one step ahead in BIM which is adoption of BIM during pre-construction stage. Thus, this paper review studies centered on BIM-integrated modelling during preconstruction stage. But there is lack of practical researches have been made during this stage. Although a large number of studies on BIM have been conducted in the past decade, a lack of consensus remains among researchers and practitioners regarding the applications of BIM during pre-construction stage, the availability of subsequent data integration tool for geotechnical activity. A comprehensive literature review was conducted for data collection and analysis. After in-depth review of journal articles widely cover the application of BIM, this study summarizes an overview and critical reflection of geotechnical data integration using BIM during pre-construction stage. The results are useful for the identification of research clusters and topics in the BIM community.

"One-for-All" Strategy in Fast Energy Storage: Production of Pillared MOF Nanorod-Templated Positive/Negative Electrodes for the Application of High-Performance Hybrid Supercapacitor.

PubMed

Qu, Chong; Liang, Zibin; Jiao, Yang; Zhao, Bote; Zhu, Bingjun; Dang, Dai; Dai, Shuge; Chen, Yu; Zou, Ruqiang; Liu, Meilin

2018-06-01

Currently, metal-organic frameworks (MOFs) are intensively studied as active materials for electrochemical energy storage applications due to their tunable structure and exceptional porosities. Among them, water stable pillared MOFs with dual ligands have been reported to exhibit high supercapacitor (SC) performance. Herein, the "One-for-All" strategy is applied to synthesize both positive and negative electrodes of a hybrid SC (HSC) from a single pillared MOF. Specifically, Ni-DMOF-TM ([Ni(TMBDC)(DABCO) 0.5 ], TMBDC: 2,3,5,6-tetramethyl-1,4-benzenedicarboxylic acid, DABCO: 1,4-diazabicyclo[2.2.2]-octane) nanorods are directly grown on carbon fiber paper (CFP) (denoted as CFP@TM-nanorods) with the help of triethylamine and function as the positive electrode of HSC under alkaline electrolyte. Meanwhile, calcinated N-doped hierarchical porous carbon nanorods (CFP@TM-NPCs) are produced and utilized as the negative counter-electrode from a one-step heat treatment of CFP@TM-nanorods. After assembling these two electrodes together to make a hybrid device, the TM-nanorods//TM-NPCs exhibit a wide voltage window of 1.5 V with a high sloping discharge plateau between 1-1.2 V, indicating its great potential for practical applications. This as-described "One-for-All" strategy is widely applicable and highly reproducible in producing MOF-based electrode materials for HSC applications, which shortens the gap between experimental synthesis and practical application of MOFs in fast energy storage. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Application of Laser Irradiation for Restorative Treatments.

PubMed

Davoudi, Amin; Sanei, Maryam; Badrian, Hamid

2016-01-01

Nowadays, lasers are widely used in many fields of medicine. Also, they can be applied at many branches of dental practice such as diagnosis, preventive procedures, restorative treatments, and endodontic therapies. Procedures like caries removal, re-mineralization, and vital pulp therapy are the most noticeable effects of laser irradiation which has gained much attention among clinicians. With controlled and appropriate wavelength, they can help stimulating dentinogenesis, controlling pulpal hemorrhage, sterilization, healing of collagenic proteins, formation of a fibrous matrix, and inducing hard tissue barrier. Nevertheless, there are many controversies in literatures regarding their effects on the quality of bonded restorations. It hampered a wide application of lasers in some aspects of restorative dentistry and requirements to identify the best way to use this technology. The aim of this mini review is to explain special characteristics of laser therapy and to introduce the possible applications of laser devices for dental purposes.

Building shared experience to advance practical application of pathway-based toxicology: liver toxicity mode-of-action.

PubMed

Willett, Catherine; Caverly Rae, Jessica; Goyak, Katy O; Minsavage, Gary; Westmoreland, Carl; Andersen, Melvin; Avigan, Mark; Duché, Daniel; Harris, Georgina; Hartung, Thomas; Jaeschke, Hartmut; Kleensang, Andre; Landesmann, Brigitte; Martos, Suzanne; Matevia, Marilyn; Toole, Colleen; Rowan, Andrew; Schultz, Terry; Seed, Jennifer; Senior, John; Shah, Imran; Subramanian, Kalyanasundaram; Vinken, Mathieu; Watkins, Paul

2014-01-01

A workshop sponsored by the Human Toxicology Project Consortium (HTPC), "Building Shared Experience to Advance Practical Application of Pathway-Based Toxicology: Liver Toxicity Mode-of-Action" brought together experts from a wide range of perspectives to inform the process of pathway development and to advance two prototype pathways initially developed by the European Commission Joint Research Center (JRC): liver-specific fibrosis and steatosis. The first half of the workshop focused on the theory and practice of pathway development; the second on liver disease and the two prototype pathways. Participants agreed pathway development is extremely useful for organizing information and found that focusing the theoretical discussion on a specific AOP is extremely helpful. In addition, it is important to include several perspectives during pathway development, including information specialists, pathologists, human health and environmental risk assessors, and chemical and product manufacturers, to ensure the biology is well captured and end use is considered.

Preface to the special issue on "Integrated Microwave Photonic Signal Processing"

NASA Astrophysics Data System (ADS)

Azaña, José; Yao, Jianping

2016-08-01

As Guest Editors, we are pleased to introduce this special issue on ;Integrated Microwave Photonic Signal Processing; published by the Elsevier journal Optics Communications. Microwave photonics is a field of growing importance from both scientific and practical application perspectives. The field of microwave photonics is devoted to the study, development and application of optics-based techniques and technologies aimed to the generation, processing, control, characterization and/or distribution of microwave signals, including signals well into the millimeter-wave frequency range. The use of photonic technologies for these microwave applications translates into a number of key advantages, such as the possibility of dealing with high-frequency, wide bandwidth signals with minimal losses and reduced electromagnetic interferences, and the potential for enhanced reconfigurability. The central purpose of this special issue is to provide an overview of the state of the art of generation, processing and characterization technologies for high-frequency microwave signals. It is now widely accepted that the practical success of microwave photonics at a large scale will essentially depend on the realization of high-performance microwave-photonic signal-processing engines in compact and integrated formats, preferably on a chip. Thus, the focus of the issue is on techniques implemented using integrated photonic technologies, with the goal of providing an update of the most recent advances toward realization of this vision.

Is biosorption suitable for decontamination of metal-bearing wastewaters? A critical review on the state-of-the-art of biosorption processes and future directions.

PubMed

Vijayaraghavan, K; Balasubramanian, R

2015-09-01

For the past few decades, biosorption has been widely investigated for the removal of different contaminants in aqueous media. A number of biomasses of different genre have been identified to possess good biosorption capacity. Insights into biosorption mechanisms have been provided by various researchers in order to develop a fundamental scientific understanding of the biosorption process. However, biosorption has not been employed widely for its large-scale commercial applications. The key factors that affect the growth and evolution of biosorption as a practical technology for decontamination of wastewaters include, (1) lack of investigations on multi-component solutions and wastewaters with complex matrix effects, (2) incomplete understanding of physico-chemical characteristics of biomasses of different types, (3) lack of studies to improve the performance of biosorbents through surface functionalization, and (4) non-integration of biosorption in wastewater/water treatment plants. This critical review aims to identify and discuss the practical limitations of biosorption and provide future research directions to make biosorption a technologically viable process with emphasis on selection and modification of biomasses to suit desired treatment applications, identify appropriate operation modes for large-scale applications of biosorption, and perform techno-economic evaluation of overall biosorption processes. Copyright © 2015 Elsevier Ltd. All rights reserved.

High-intensity laser application in Orthodontics

PubMed Central

Sant’Anna, Eduardo Franzotti; Araújo, Mônica Tirre de Souza; Nojima, Lincoln Issamu; da Cunha, Amanda Carneiro; da Silveira, Bruno Lopes; Marquezan, Mariana

2017-01-01

ABSTRACT Introduction: In dental practice, low-level laser therapy (LLLT) and high-intensity laser therapy (HILT) are mainly used for dental surgery and biostimulation therapy. Within the Orthodontic specialty, while LLLT has been widely used to treat pain associated with orthodontic movement, accelerate bone regeneration after rapid maxillary expansion, and enhance orthodontic tooth movement, HILT, in turn, has been seen as an alternative for addressing soft tissue complications associated to orthodontic treatment. Objective: The aim of this study is to discuss HILT applications in orthodontic treatment. Methods: This study describes the use of HILT in surgical treatments such as gingivectomy, ulotomy, ulectomy, fiberotomy, labial and lingual frenectomies, as well as hard tissue and other dental restorative materials applications. Conclusion: Despite the many applications for lasers in Orthodontics, they are still underused by Brazilian practitioners. However, it is quite likely that this demand will increase over the next years - following the trend in the USA, where laser therapies are more widely used. PMID:29364385

Simulation in teaching regional anesthesia: current perspectives.

PubMed

Udani, Ankeet D; Kim, T Edward; Howard, Steven K; Mariano, Edward R

2015-01-01

The emerging subspecialty of regional anesthesiology and acute pain medicine represents an opportunity to evaluate critically the current methods of teaching regional anesthesia techniques and the practice of acute pain medicine. To date, there have been a wide variety of simulation applications in this field, and efficacy has largely been assumed. However, a thorough review of the literature reveals that effective teaching strategies, including simulation, in regional anesthesiology and acute pain medicine are not established completely yet. Future research should be directed toward comparative-effectiveness of simulation versus other accepted teaching methods, exploring the combination of procedural training with realistic clinical scenarios, and the application of simulation-based teaching curricula to a wider range of learner, from the student to the practicing physician.

Simulation in teaching regional anesthesia: current perspectives

PubMed Central

Udani, Ankeet D; Kim, T Edward; Howard, Steven K; Mariano, Edward R

2015-01-01

The emerging subspecialty of regional anesthesiology and acute pain medicine represents an opportunity to evaluate critically the current methods of teaching regional anesthesia techniques and the practice of acute pain medicine. To date, there have been a wide variety of simulation applications in this field, and efficacy has largely been assumed. However, a thorough review of the literature reveals that effective teaching strategies, including simulation, in regional anesthesiology and acute pain medicine are not established completely yet. Future research should be directed toward comparative-effectiveness of simulation versus other accepted teaching methods, exploring the combination of procedural training with realistic clinical scenarios, and the application of simulation-based teaching curricula to a wider range of learner, from the student to the practicing physician. PMID:26316812

Intelligent MEMS spectral sensor for NIR applications (Conference Presentation)

NASA Astrophysics Data System (ADS)

Kantojärvi, Uula; Antila, Jarkko E.; Mäkynen, Jussi; Suhonen, Janne

2017-05-01

Near Infrared (NIR) spectrometers have been widely used in many material inspection applications, but mainly in central laboratories. The role of miniaturization, robustness of spectrometer and portability are really crucial when field inspection tools should be developed. We present an advanced spectral sensor based on a tunable Microelectromechanical (MEMS) Fabry-Perot Interferometer which will meet these requirements. We describe the wireless device design, operation principle and easy-to-use algorithms to adapt the sensor to number of applications. Multiple devices can be operated simultaneously and seamlessly through cloud connectivity. We also present some practical NIR applications carried out with truly portable NIR device.

A system-wide analysis using a senior-friendly hospital framework identifies current practices and opportunities for improvement in the care of hospitalized older adults.

PubMed

Wong, Ken S; Ryan, David P; Liu, Barbara A

2014-11-01

Older adults are vulnerable to hospital-associated complications such as falls, pressure ulcers, functional decline, and delirium, which can contribute to prolonged hospital stay, readmission, and nursing home placement. These vulnerabilities are exacerbated when the hospital's practices, services, and physical environment are not sufficiently mindful of the complex, multidimensional needs of frail individuals. Several frameworks have emerged to help hospitals examine how organization-wide processes can be customized to avoid these complications. This article describes the application of one such framework-the Senior-Friendly Hospital (SFH) framework adopted in Ontario, Canada-which comprises five interrelated domains: organizational support, processes of care, emotional and behavioral environment, ethics in clinical care and research, and physical environment. This framework provided the blueprint for a self-assessment of all 155 adult hospitals across the province of Ontario. The system-wide analysis identified practice gaps and promising practices within each domain of the SFH framework. Taken together, these results informed 12 recommendations to support hospitals at all stages of development in becoming friendly to older adults. Priorities for system-wide action were identified, encouraging hospitals to implement or further develop their processes to better address hospital-acquired delirium and functional decline. These recommendations led to collaborative action across the province, including the development of an online toolkit and the identification of accountability indicators to support hospitals in quality improvement focusing on senior-friendly care. © 2014, Copyright the Authors Journal compilation © 2014, The American Geriatrics Society.

Lyophilization process design space.

PubMed

Patel, Sajal Manubhai; Pikal, Michael J

2013-11-01

The application of key elements of quality by design (QbD), such as risk assessment, process analytical technology, and design space, is discussed widely as it relates to freeze-drying process design and development. However, this commentary focuses on constructing the Design and Control Space, particularly for the primary drying step of the freeze-drying process. Also, practical applications and considerations of claiming a process Design Space under the QbD paradigm have been discussed. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

Vapordynamic thermosyphon - heat transfer two-phase device for wide applications

NASA Astrophysics Data System (ADS)

Vasiliev, Leonard; Vasiliev, Leonid; Zhuravlyov, Alexander; Shapovalov, Aleksander; Rodin, Aleksei

2015-12-01

Vapordynamic thermosyphon (VDT) is an efficient heat transfer device. The two-phase flow generation and dynamic interaction between the liquid slugs and vapor bubbles in the annular minichannel of the VDT condenser are the main features of such thermosyphon, which allowed to increase its thermodynamic efficiency. VDT can transfer heat in horizontal position over a long distance. The condenser is nearly isothermal with the length of tens of meters. The VDT evaporators may have different forms. Some practical applications of VDT are considered.

AC application of second generation HTS wire

NASA Astrophysics Data System (ADS)

Thieme, C. L. H.; Gagnon, K.; Voccio, J.; Aized, D.; Claassen, J.

2008-02-01

For the production of Second Generation (2G) YBCO High Temperature Superconductor wire American Superconductor uses a wide-strip MOD-YBCO/RABiTSTM process, a low-cost approach for commercial manufacturing. It can be engineered with a high degree of flexibility to manufacture practical 2G conductors with architectures and properties tailored for specific applications and operating conditions. For ac applications conductor and coil design can be geared towards low hysteretic losses. For applications which experience high frequency ac fields, the stabilizer needs to be adjusted for low eddy current losses. For these applications a stainless-steel laminate is used. An example is a Low Pass Filter Inductor which was developed and built in this work.

Application of a wide-field phantom eye for optical coherence tomography and reflectance imaging.

PubMed

Corcoran, Anthony; Muyo, Gonzalo; van Hemert, Jano; Gorman, Alistair; Harvey, Andrew R

2015-12-15

Optical coherence tomography (OCT) and reflectance imaging are used in clinical practice to measure the thickness and transverse dimensions of retinal features. The recent trend towards increasing the field of view (FOV) of these devices has led to an increasing significance of the optical aberrations of both the human eye and the device. We report the design, manufacture and application of the first phantom eye that reproduces the off-axis optical characteristics of the human eye, and allows the performance assessment of wide-field ophthalmic devices. We base our design and manufacture on the wide-field schematic eye, [Navarro, R. J. Opt. Soc. Am. A , 1985, 2 .] as an accurate proxy to the human eye and enable assessment of ophthalmic imaging performance for a [Formula: see text] external FOV. We used multi-material 3D-printed retinal targets to assess imaging performance of the following ophthalmic instruments: the Optos 200Tx, Heidelberg Spectralis, Zeiss FF4 fundus camera and Optos OCT SLO and use the phantom to provide an insight into some of the challenges of wide-field OCT.

Application of a wide-field phantom eye for optical coherence tomography and reflectance imaging

NASA Astrophysics Data System (ADS)

Corcoran, Anthony; Muyo, Gonzalo; van Hemert, Jano; Gorman, Alistair; Harvey, Andrew R.

2015-12-01

Optical coherence tomography (OCT) and reflectance imaging are used in clinical practice to measure the thickness and transverse dimensions of retinal features. The recent trend towards increasing the field of view (FOV) of these devices has led to an increasing significance of the optical aberrations of both the human eye and the device. We report the design, manufacture and application of the first phantom eye that reproduces the off-axis optical characteristics of the human eye, and allows the performance assessment of wide-field ophthalmic devices. We base our design and manufacture on the wide-field schematic eye, [Navarro, R. J. Opt. Soc. Am. A, 1985, 2.] as an accurate proxy to the human eye and enable assessment of ophthalmic imaging performance for a ? external FOV. We used multi-material 3D-printed retinal targets to assess imaging performance of the following ophthalmic instruments: the Optos 200Tx, Heidelberg Spectralis, Zeiss FF4 fundus camera and Optos OCT SLO and use the phantom to provide an insight into some of the challenges of wide-field OCT.

Imaging brain microstructure with diffusion MRI: practicality and applications.

PubMed

Alexander, Daniel C; Dyrby, Tim B; Nilsson, Markus; Zhang, Hui

2017-11-29

This article gives an overview of microstructure imaging of the brain with diffusion MRI and reviews the state of the art. The microstructure-imaging paradigm aims to estimate and map microscopic properties of tissue using a model that links these properties to the voxel scale MR signal. Imaging techniques of this type are just starting to make the transition from the technical research domain to wide application in biomedical studies. We focus here on the practicalities of both implementing such techniques and using them in applications. Specifically, the article summarizes the relevant aspects of brain microanatomy and the range of diffusion-weighted MR measurements that provide sensitivity to them. It then reviews the evolution of mathematical and computational models that relate the diffusion MR signal to brain tissue microstructure, as well as the expanding areas of application. Next we focus on practicalities of designing a working microstructure imaging technique: model selection, experiment design, parameter estimation, validation, and the pipeline of development of this class of technique. The article concludes with some future perspectives on opportunities in this topic and expectations on how the field will evolve in the short-to-medium term. Copyright © 2017 John Wiley & Sons, Ltd.

Comparison of smartphone application-based vital sign monitors without external hardware versus those used in clinical practice: a prospective trial.

PubMed

Alexander, John C; Minhajuddin, Abu; Joshi, Girish P

2017-08-01

Use of healthcare-related smartphone applications is common. However, there is concern that inaccurate information from these applications may lead patients to make erroneous healthcare decisions. The objective of this study is to study smartphone applications purporting to measure vital sign data using only onboard technology compared with monitors used routinely in clinical practice. This is a prospective trial comparing correlation between a clinically utilized vital sign monitor (Propaq CS, WelchAllyn, Skaneateles Falls, NY, USA) and four smartphone application-based monitors Instant Blood Pressure, Instant Blood Pressure Pro, Pulse Oximeter, and Pulse Oximeter Pro. We performed measurements of heart rate (HR), systolic blood pressures (SBP), diastolic blood pressure (DBP), and oxygen saturation (SpO 2 ) using standard monitor and four smartphone applications. Analysis of variance was used to compare measurements from the applications to the routine monitor. The study was completed on 100 healthy volunteers. Comparison of routine monitor with the smartphone applications shows significant differences in terms of HR, SpO 2 and DBP. The SBP values from the applications were not significantly different from those from the routine monitor, but had wide limits of agreement signifying a large degree of variation in the compared values. The degree of correlation between monitors routinely used in clinical practice and the smartphone-based applications studied is insufficient to recommend clinical utilization. This lack of correlation suggests that the applications evaluated do not provide clinically meaningful data. The inaccurate data provided by these applications can potentially contribute to patient harm.

Provably-Secure (Chinese Government) SM2 and Simplified SM2 Key Exchange Protocols

PubMed Central

Nam, Junghyun; Kim, Moonseong

2014-01-01

We revisit the SM2 protocol, which is widely used in Chinese commercial applications and by Chinese government agencies. Although it is by now standard practice for protocol designers to provide security proofs in widely accepted security models in order to assure protocol implementers of their security properties, the SM2 protocol does not have a proof of security. In this paper, we prove the security of the SM2 protocol in the widely accepted indistinguishability-based Bellare-Rogaway model under the elliptic curve discrete logarithm problem (ECDLP) assumption. We also present a simplified and more efficient version of the SM2 protocol with an accompanying security proof. PMID:25276863

Strategic environmental assessment in tourism planning - Extent of application and quality of documentation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carvalho Lemos, Clara, E-mail: clara@sc.usp.br; Fischer, Thomas B., E-mail: fischer@liverpool.ac.uk; Pereira Souza, Marcelo, E-mail: mps@usp.br

Strategic environmental assessment (SEA) has been applied throughout the world in different sectors and in various ways. This paper reports on results of a PhD research on SEA applied to tourism development planning, reflecting the situation in mid-2010. First, the extent of tourism specific SEA application world-wide is established. Then, based on a review of the quality of 10 selected SEA reports, good practice, as well as challenges, trends and opportunities for tourism specific SEA are identified. Shortcomings of SEA in tourism planning are established and implications for future research are outlined. - Highlights: Black-Right-Pointing-Pointer The extent of tourism specificmore » SEA practice is identified. Black-Right-Pointing-Pointer Selected SEA/Tourism reports are evaluated. Black-Right-Pointing-Pointer SEA application to tourism planning is still limited. Black-Right-Pointing-Pointer A number of shortcomings can be pointed out.« less

A new BP Fourier algorithm and its application in English teaching evaluation

NASA Astrophysics Data System (ADS)

Pei, Xuehui; Pei, Guixin

2017-08-01

BP neural network algorithm has wide adaptability and accuracy when used in complicated system evaluation, but its calculation defects such as slow convergence have limited its practical application. The paper tries to speed up the calculation convergence of BP neural network algorithm with Fourier basis functions and presents a new BP Fourier algorithm for complicated system evaluation. First, shortages and working principle of BP algorithm are analyzed for subsequent targeted improvement; Second, the presented BP Fourier algorithm adopts Fourier basis functions to simplify calculation structure, designs new calculation transfer function between input and output layers, and conducts theoretical analysis to prove the efficiency of the presented algorithm; Finally, the presented algorithm is used in evaluating university English teaching and the application results shows that the presented BP Fourier algorithm has better performance in calculation efficiency and evaluation accuracy and can be used in evaluating complicated system practically.

Dwell time considerations for large area cold plasma decontamination

NASA Astrophysics Data System (ADS)

Konesky, Gregory

2009-05-01

Atmospheric discharge cold plasmas have been shown to be effective in the reduction of pathogenic bacteria and spores and in the decontamination of simulated chemical warfare agents, without the generation of toxic or harmful by-products. Cold plasmas may also be useful in assisting cleanup of radiological "dirty bombs." For practical applications in realistic scenarios, the plasma applicator must have both a large area of coverage, and a reasonably short dwell time. However, the literature contains a wide range of reported dwell times, from a few seconds to several minutes, needed to achieve a given level of reduction. This is largely due to different experimental conditions, and especially, different methods of generating the decontaminating plasma. We consider these different approaches and attempt to draw equivalencies among them, and use this to develop requirements for a practical, field-deployable plasma decontamination system. A plasma applicator with 12 square inches area and integral high voltage, high frequency generator is described.

Some aspects of wind tunnel magnetic suspension systems with special application at large physical scales

NASA Technical Reports Server (NTRS)

Britcher, C. P.

1983-01-01

Wind tunnel magnetic suspension and balance systems (MSBSs) have so far failed to find application at the large physical scales necessary for the majority of aerodynamic testing. Three areas of technology relevant to such application are investigated. Two variants of the Spanwise Magnet roll torque generation scheme are studied. Spanwise Permanent Magnets are shown to be practical and are experimentally demonstrated. Extensive computations of the performance of the Spanwise Iron Magnet scheme indicate powerful capability, limited principally be electromagnet technology. Aerodynamic testing at extreme attitudes is shown to be practical in relatively conventional MSBSs. Preliminary operation of the MSBS over a wide range of angles of attack is demonstrated. The impact of a requirement for highly reliable operation on the overall architecture of Large MSBSs is studied and it is concluded that system cost and complexity need not be seriously increased.

Application of DNA-based methods in forensic entomology.

PubMed

Wells, Jeffrey D; Stevens, Jamie R

2008-01-01

A forensic entomological investigation can benefit from a variety of widely practiced molecular genotyping methods. The most commonly used is DNA-based specimen identification. Other applications include the identification of insect gut contents and the characterization of the population genetic structure of a forensically important insect species. The proper application of these procedures demands that the analyst be technically expert. However, one must also be aware of the extensive list of standards and expectations that many legal systems have developed for forensic DNA analysis. We summarize the DNA techniques that are currently used in, or have been proposed for, forensic entomology and review established genetic analyses from other scientific fields that address questions similar to those in forensic entomology. We describe how accepted standards for forensic DNA practice and method validation are likely to apply to insect evidence used in a death or other forensic entomological investigation.

Tapping into the Power of School Climate to Prevent Bullying: One Application of Schoolwide Positive Behavior Interventions and Supports

ERIC Educational Resources Information Center

Bosworth, Kris; Judkins, Maryann

2014-01-01

Preventing bullying requires a comprehensive approach that includes a focus on school climate. We review the climate features shown to reduce bullying, then illustrate how School-wide Positive Behavioral Interventions and Supports (SWPBIS) applies these principles in practice. SWPBIS, grounded in multiple theories--behaviorism, social learning…

What We Know and Need to Know about Preventing Problem Behavior in Schools

ERIC Educational Resources Information Center

Sugai, George; Horner, Robert H.

2008-01-01

When chronic problem behaviors occur in schools, the tendency is to react with stringent and restrictive consequences. Recently, emphasis has shifted toward proactive prevention strategies. In this article, we focus on what we know and need to know about school-wide applications of effective practices and systems for preventing problem behaviors.…

Negative Evidence in Language Classroom Activities: A Study of Its Availability and Accessibility to Language Learners.

ERIC Educational Resources Information Center

Pica, Teresa; Washburn, Gay N.

2002-01-01

This study identified and described the ways in which negative evidence was made available and accessible to learners during two widely practiced classroom activities. One was a teacher-led discussion that emphasized communication of subject matter content. The other was a teacher-led sentence construction exercise that focused on application of…

Maslow--Move Aside! A Heuristical Motivation Model for Leaders in Career and Technical Education

ERIC Educational Resources Information Center

Kroth, Michael

2007-01-01

Maslow's Hierarchy of Needs is often used as an example of motivational theory in both practitioner and scholarly journals, yet considerable motivational research is being conducted that is not widely known, nor applied in practical settings. This paper summarizes several of those lines of inquiry and suggests applications for career and technical…

Remote sensing in Michigan for land resource management

NASA Technical Reports Server (NTRS)

Sattinger, I. J.; Istvan, L. B.; Roller, N. E. G.; Lowe, D. S.

1977-01-01

An extensive program was conducted to establish practical uses of NASA earth resource survey technology in meeting resource management problems throughout Michigan. As a result, a broad interest in and understanding of the usefulness of remote sensing methods was developed and a wide variety of applications was undertaken to provide information needed for informed decision making and effective action.

Contact Calls: Twitter as a Dialogic Social and Linguistic Practice

ERIC Educational Resources Information Center

Gillen, Julia; Merchant, Guy

2013-01-01

The rapid adoption of new forms of digital communication is now attracting the attention of researchers from a wide range of disciplines in the social sciences. In the landscape of social media, the microblogging application Twitter has rapidly become an accepted feature of everyday life with a broad appeal. This paper, from a dual autoethnography…

Practical Applications of Analyses and Descriptions of Texts.

ERIC Educational Resources Information Center

Pugh, A. K.

An examination of the literature supports the view that the implications of text studies have yet to have much impact on classrooms. For example, word frequency lists have been used widely in the preparation of reading materials. However, few books come with a list of the frequency of the words they contain. Thus, the main use of comparing texts…

SPECT and PET radiopharmaceuticals for molecular imaging of apoptosis: from bench to clinic

PubMed Central

Wang, Xiaobo; Feng, Han; Zhao, Shichao; Xu, Junling; Wu, Xinyu; Cui, Jing; Zhang, Ying; Qin, Yuhua; Liu, Zhiguo; Gao, Tang; Gao, Yongju; Zeng, Wenbin

2017-01-01

Owing to the central role of apoptosis in many human diseases and the wide-spread application of apoptosis-based therapeutics, molecular imaging of apoptosis in clinical practice is of great interest for clinicians, and holds great promises. Based on the well-defined biochemical changes for apoptosis, a rich assortment of probes and approaches have been developed for molecular imaging of apoptosis with various imaging modalities. Among these imaging techniques, nuclear imaging (including single photon emission computed tomography and positron emission tomography) remains the premier clinical method owing to their high specificity and sensitivity. Therefore, the corresponding radiopharmaceuticals have been a major focus, and some of them like 99mTc-Annexin V, 18F-ML-10, 18F-CP18, and 18F-ICMT-11 are currently under clinical investigations in Phase I/II or Phase II/III clinical trials on a wide scope of diseases. In this review, we summarize these radiopharmaceuticals that have been widely used in clinical trials and elaborate them in terms of radiosynthesis, pharmacokinetics and dosimetry, and their applications in different clinical stages. We also explore the unique features required to qualify a desirable radiopharmaceutical for imaging apoptosis in clinical practice. Particularly, a perspective of the impact of these clinical efforts, namely, apoptosis imaging as predictive and prognostic markers, early-response indicators and surrogate endpoints, is also the highlight of this review. PMID:28108738

Adaptive learning and control for MIMO system based on adaptive dynamic programming.

PubMed

Fu, Jian; He, Haibo; Zhou, Xinmin

2011-07-01

Adaptive dynamic programming (ADP) is a promising research field for design of intelligent controllers, which can both learn on-the-fly and exhibit optimal behavior. Over the past decades, several generations of ADP design have been proposed in the literature, which have demonstrated many successful applications in various benchmarks and industrial applications. While many of the existing researches focus on multiple-inputs-single-output system with steepest descent search, in this paper we investigate a generalized multiple-input-multiple-output (GMIMO) ADP design for online learning and control, which is more applicable to a wide range of practical real-world applications. Furthermore, an improved weight-updating algorithm based on recursive Levenberg-Marquardt methods is presented and embodied in the GMIMO approach to improve its performance. Finally, we test the performance of this approach based on a practical complex system, namely, the learning and control of the tension and height of the looper system in a hot strip mill. Experimental results demonstrate that the proposed approach can achieve effective and robust performance.

Sustaining high-energy orbits of bi-stable energy harvesters by attractor selection

NASA Astrophysics Data System (ADS)

Udani, Janav P.; Arrieta, Andres F.

2017-11-01

Nonlinear energy harvesters have the potential to efficiently convert energy over a wide frequency range; however, difficulties in attaining and sustaining high-energy oscillations restrict their applicability in practical scenarios. In this letter, we propose an actuation methodology to switch the state of bi-stable harvesters from the low-energy intra-well configuration to the coexisting high-energy inter-well configuration by controlled phase shift perturbations. The strategy is designed to introduce a change in the system state without creating distinct metastable attractors by exploiting the basins of attraction of the coexisting stable attractors. Experimental results indicate that the proposed switching strategy yields a significant improvement in energy transduction capabilities, is highly economical, enabling the rapid recovery of energy spent in the disturbance, and can be practically implemented with widely used low-strain piezoelectric transducers.

Application and research of recyclable cables in foundation pit support engineering

NASA Astrophysics Data System (ADS)

Zheng, Suping

2018-05-01

Anchoring cables are widely used in the construction of foundation pit as a temporary support structure. After the construction is completed, the anchor cables left in the ground will not only cause environmental pollution but also cause a great waste of resources. The emergence of recyclable cable technology, to avoid such problems, to achieve the secondary use of the anchor cable, excavation in the excavation project is more and more widely used. Combined with the design and construction of recoverable anchor cable in engineering practice, the application effect of recoverable anchor cable in foundation pit support is analyzed, and the conclusion that the support effect of recoverable anchor cable is stable and safe can be obtained Recyclable anchor cable in the future support projects to provide a reference.

A Review of Distributed Optical Fiber Sensors for Civil Engineering Applications

PubMed Central

Barrias, António; Casas, Joan R.; Villalba, Sergi

2016-01-01

The application of structural health monitoring (SHM) systems to civil engineering structures has been a developing studied and practiced topic, that has allowed for a better understanding of structures’ conditions and increasingly lead to a more cost-effective management of those infrastructures. In this field, the use of fiber optic sensors has been studied, discussed and practiced with encouraging results. The possibility of understanding and monitor the distributed behavior of extensive stretches of critical structures it’s an enormous advantage that distributed fiber optic sensing provides to SHM systems. In the past decade, several R & D studies have been performed with the goal of improving the knowledge and developing new techniques associated with the application of distributed optical fiber sensors (DOFS) in order to widen the range of applications of these sensors and also to obtain more correct and reliable data. This paper presents, after a brief introduction to the theoretical background of DOFS, the latest developments related with the improvement of these products by presenting a wide range of laboratory experiments as well as an extended review of their diverse applications in civil engineering structures. PMID:27223289

A Review of Distributed Optical Fiber Sensors for Civil Engineering Applications.

PubMed

Barrias, António; Casas, Joan R; Villalba, Sergi

2016-05-23

The application of structural health monitoring (SHM) systems to civil engineering structures has been a developing studied and practiced topic, that has allowed for a better understanding of structures' conditions and increasingly lead to a more cost-effective management of those infrastructures. In this field, the use of fiber optic sensors has been studied, discussed and practiced with encouraging results. The possibility of understanding and monitor the distributed behavior of extensive stretches of critical structures it's an enormous advantage that distributed fiber optic sensing provides to SHM systems. In the past decade, several R & D studies have been performed with the goal of improving the knowledge and developing new techniques associated with the application of distributed optical fiber sensors (DOFS) in order to widen the range of applications of these sensors and also to obtain more correct and reliable data. This paper presents, after a brief introduction to the theoretical background of DOFS, the latest developments related with the improvement of these products by presenting a wide range of laboratory experiments as well as an extended review of their diverse applications in civil engineering structures.

The Pharmacology of Actoprotectors: Practical Application for Improvement of Mental and Physical Performance

PubMed Central

Oliynyk, Sergiy; Oh, Seikwan

2012-01-01

Actoprotectors are preparations that enhance body stability against physical loads without increasing oxygen consumption or heat production. Or, in short, actoprotectors are synthetic adaptogens with a significant capacity to improve physical performance. This paper explores the history of actoprotectors’development, their pharmacological properties, mechanism of action, and practical application to the improvement of mental and physical performance. A brief summary of the clinico-pharmacological characteristics of the main representatives of this class (bemitil and bromantane) is provided. Some other synthesized compounds, and even natural ones such as ginseng, also are regarded as potential actoprotectors, and these are treated herein as well. Actoprotectors, owing to their wide-ranging pharmacological activities, high efficiency and safety, can be applied under either normal or extreme conditions. PMID:24009833

Practical small-scale explosive seam welding

NASA Technical Reports Server (NTRS)

Bement, L. J.

1983-01-01

A small-scale explosive seam welding process has been developed that can significantly contribute to remote metal joining operations under hazardous or inaccessible conditions, such as nuclear reactor repair and assembly of structure in space. This paper describes this explosive seam welding process in terms of joining principles, variables, types of joints created, capabilities, and applications. Very small quantities of explosive in a ribbon configuration are used to create narrow (less than 0.5 inch), long-length, uniform, hermetically sealed joints that exhibit parent metal properties in a wide variety of metals, alloys, and combinations. The practicality of this process has been demonstrated by its current acceptance, as well as its capabilities that are superior in many applications to the universally accepted joining processes, such as mechanical fasteners, fusion and resistance welding, and adhesives.

Incorporating Hypnosis into Pediatric Clinical Encounters

PubMed Central

Pendergrast, Robert A.

2017-01-01

Increasing numbers of licensed health professionals who care for children have been trained in clinical hypnosis. The evidence base for the safety and efficacy of this therapeutic approach in a wide variety of conditions is also growing. Pediatricians and other health professionals who have received training may wish to apply these skills in appropriate clinical scenarios but still may be unsure of the practical matters of how to incorporate this skill-set into day to day practice. Moreover, the practical application of such skills will take very different forms depending on the practice setting, types of acute or chronic conditions, patient and family preferences, and the developmental stages of the child or teen. This article reviews the application of pediatric clinical hypnosis skills by describing the use of hypnotic language outside of formal trance induction, by describing natural trance states that occur in children and teens in healthcare settings, and by describing the process of planning a clinical hypnosis encounter. It is assumed that this article does not constitute training in hypnosis or qualify its readers for the application of such skills; rather, it may serve as a practical guide for those professionals who have been so trained, and may serve to inform other professionals what to expect when referring a patient for hypnotherapy. The reader is referred to specific training opportunities and organizations. PMID:28300761

Nursing journal clubs and the clinical nurse specialist.

PubMed

Westlake, Cheryl; Albert, Nancy M; Rice, Karen L; Bautista, Cynthia; Close, Jackie; Foster, Jan; Timmerman, Gayle M

2015-01-01

The purpose of this article was to describe the clinical nurse specialist's role in developing and implementing a journal club. Tools for critiquing clinical and research articles with an application of each are provided. The journal club provides a forum through which nurses maintain their knowledge base about clinically relevant topics and developments in their specific clinical discipline, analyze and synthesize the relevant scientific literature as evidence, and engage in informal discussions about evidence-based and best practices. The value of journal clubs includes nursing staff education, review of and support for evidence-based practice, promotion of nursing research, and fostering of organization-wide nursing practice changes. The process for establishing a journal club and suggested appraisal tools are discussed. In addition, strategies for overcoming barriers to the implementation of a journal club are outlined. Suggested article review questions and a reporting format for clinical and research articles are provided with examples from 2 articles. Finally, a glossary of terms commonly used by research scientists and manuscript writers are listed and additional resources provided. The clinical nurse specialist's role in developing and implementing a journal club will be facilitated through the use of this article. Enhanced nursing staff education, evidence-based practice, organization-wide nursing practice changes, and nursing research may be conducted following the implementation of a nursing journal club.

SeGRAm - A practical and versatile tool for spacecraft trajectory optimization

NASA Technical Reports Server (NTRS)

Rishikof, Brian H.; Mccormick, Bernell R.; Pritchard, Robert E.; Sponaugle, Steven J.

1991-01-01

An implementation of the Sequential Gradient/Restoration Algorithm, SeGRAm, is presented along with selected examples. This spacecraft trajectory optimization and simulation program uses variational calculus to solve problems of spacecraft flying under the influence of one or more gravitational bodies. It produces a series of feasible solutions to problems involving a wide range of vehicles, environments and optimization functions, until an optimal solution is found. The examples included highlight the various capabilities of the program and emphasize in particular its versatility over a wide spectrum of applications from ascent to interplanetary trajectories.

Operationalizing Dynamic Ocean Management (DOM): Understanding the Incentive Structure, Policy and Regulatory Context for DOM in Practice

NASA Astrophysics Data System (ADS)

Lewison, R. L.; Saumweber, W. J.; Erickson, A.; Martone, R. G.

2016-12-01

Dynamic ocean management, or management that uses near real-time data to guide the spatial distribution of commercial activities, is an emerging approach to balance ocean resource use and conservation. Employing a wide range of data types, dynamic ocean management in a fisheries context can be used to meet multiple objectives - managing target quota, bycatch reduction, and reducing interactions with species of conservation concern. There is a growing list of DOM applications currently in practice in fisheries around the world, yet the approach is new enough that both fishers and fisheries managers are unclear how DOM can be applied to their fishery. Here, we use the experience from dynamic ocean management applications that are currently in practice to address the commonly asked question "How can dynamic management approaches be implemented in a traditionally managed fishery?". Combining knowledge from the DOM participants with a review of regulatory frameworks and incentive structures, stakeholder participation, and technological requirements of DOM in practice, we identify ingredients that have supported successful implementation of this new management approach.

Stakeholder attitudes and needs regarding cell-free fetal DNA testing.

PubMed

Hill, Melissa; Lewis, Celine; Chitty, Lyn S

2016-04-01

To explore stakeholder views on cell-free DNA testing and highlight findings important for successful implementation and the provision of best practice in counseling. Noninvasive tests based on the analysis of cell-free fetal DNA are now widely available in clinical practice and applications are expanding rapidly. It is essential that stakeholder views are considered in order to identify and address any ethical and social issues. We provide an overview of stakeholder viewpoints and then focus on the key issues of informed decision making, test uptake, service delivery and information sources. Stakeholders are positive about the introduction of cell-free fetal DNA testing into clinical practice. They describe both practical and psychological benefits arising from tests that are safe and can potentially be performed earlier in pregnancy. Key concerns, which include the potential for these tests to have a negative impact on informed decision making and increased societal pressure to have testing, can be addressed through careful parent-directed counseling. As applications for these tests expand it is increasingly important to develop innovative approaches to facilitate good understanding for parents who are offered noninvasive prenatal testing.

A Pilot Study of the DBT Coach: An Interactive Mobile Phone Application for Individuals with Borderline Personality Disorder and Substance Use Disorder

ERIC Educational Resources Information Center

Rizvi, Shireen L.; Dimeff, Linda A.; Skutch, Julie; Carroll, David; Linehan, Marsha M.

2011-01-01

Dialectical behavior therapy (DBT) has received strong empirical support and is practiced widely as a treatment for borderline personality disorder (BPD) and BPD with comorbid substance use disorders (BPD-SUD). Therapeutic success in DBT requires that individuals generalize newly acquired skills to their natural environment. However, there have…

Text Messaging, Pragmatic Competence, and Affective Facilitation in the EFL Context: A Pilot Study

ERIC Educational Resources Information Center

Haggan, Madeline

2010-01-01

Since text messaging is a widely popular method of communication among young people, the paper tries to investigate whether it might have some practical application in the EFL classroom. Kuwaiti EFL students asked to render a mixture of text messages written by their peers and native English speakers into Standard English produced a large number…

Information visualisation based on graph models

NASA Astrophysics Data System (ADS)

Kasyanov, V. N.; Kasyanova, E. V.

2013-05-01

Information visualisation is a key component of support tools for many applications in science and engineering. A graph is an abstract structure that is widely used to model information for its visualisation. In this paper, we consider practical and general graph formalism called hierarchical graphs and present the Higres and Visual Graph systems aimed at supporting information visualisation on the base of hierarchical graph models.

Using the Internet in Career Education. Practice Application Brief No. 1.

ERIC Educational Resources Information Center

Wagner, Judith O.

The World Wide Web has a wealth of information on career planning, individual jobs, and job search methods that counselors and teachers can use. Search engines such as Yahoo! and Magellan, organized like library tools, and engines such as AltaVista and HotBot search words or phrases. Web indexes offer a variety of features. The criteria for…

Research on Computers in Mathematics Education, IV. The Use of Computers in Mathematics Education Resource Series.

ERIC Educational Resources Information Center

Kieren, Thomas E.

This last paper in a set of four reviews research on a wide variety of computer applications in the mathematics classroom. It covers computer-based instruction, especially drill-and-practice and tutorial modes; computer-managed instruction; and computer-augmented problem-solving. Analytical comments on the findings and status of the research are…

Research Considerations and Theoretical Application for Best Practices in Higher Education: Latina/os Achieving Success

ERIC Educational Resources Information Center

Castellanos, Jeanett; Gloria, Alberta M.

2007-01-01

In this work, the authors take a critical look at what general measures of success do and do not disclose about the Latina/o experience in higher education and use that assessment to set forth a reconceptualization of the elements of success within a psychosociocultural (PSC) framework. Using "dichos," or widely used sayings of wisdom…

Interactions of glyphosate use with farm characteristics and cropping patterns in Central Europe.

PubMed

Wiese, Armin; Schulte, Michael; Theuvsen, Ludwig; Steinmann, Horst-Henning

2018-05-01

Although glyphosate is the most widely used herbicide in the European Union, little is known about the patterns of its usage in arable farming. Therefore, a nationwide survey of 2026 German farmers was analysed to obtain further knowledge about glyphosate applications in conventional European arable farming. Given its broad range of agri-environmental and farm-type conditions, Germany can be regarded as a suitable study region to represent Central European farming. The growing season 2013/2014 was set as a reference. Farmers who participated in the survey employ diverse patterns of glyphosate use. While 23% stated that they did not use glyphosate in the season in question, others applied glyphosate to their total arable area. However, most applications occurred on specific parts of the farm. Application patterns of oilseed rape, winter wheat, maize and sugar beet were studied in detail, and U-shaped distributions of glyphosate use intensity were observed. The effects of farm type and management practices on glyphosate use patterns were mixed in the various crops. Motivation for glyphosate use differs widely within the farming community. Agricultural researchers, extension services and policy makers are recommended to mitigate vulnerabilities associated with glyphosate use, such as routine spraying and practices that increase selection pressure for the evolution of glyphosate-resistant weeds. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

[A framework for evaluating ethical issues of public health initiatives: practical aspects and theoretical implications].

PubMed

Petrini, Carlo

2015-01-01

The "Framework for the Ethical Conduct of Public Health Initiatives", developed by Public Health Ontario, is a practical guide for assessing the ethical implications of evidence-generating public health initiatives, whether research or non-research activities, involving people, their biological materials or their personal information. The Framework is useful not only to those responsible for determining the ethical acceptability of an initiative, but also to investigators planning new public health initiatives. It is informed by a theoretical approach that draws on widely shared bioethical principles. Two considerations emerge from both the theoretical framework and its practical application: the line between practice and research is often blurred; public health ethics and biomedical research ethics are based on the same common heritage of values.

Modeling the radiation pattern of LEDs.

PubMed

Moreno, Ivan; Sun, Ching-Cherng

2008-02-04

Light-emitting diodes (LEDs) come in many varieties and with a wide range of radiation patterns. We propose a general, simple but accurate analytic representation for the radiation pattern of the light emitted from an LED. To accurately render both the angular intensity distribution and the irradiance spatial pattern, a simple phenomenological model takes into account the emitting surfaces (chip, chip array, or phosphor surface), and the light redirected by both the reflecting cup and the encapsulating lens. Mathematically, the pattern is described as the sum of a maximum of two or three Gaussian or cosine-power functions. The resulting equation is widely applicable for any kind of LED of practical interest. We accurately model a wide variety of radiation patterns from several world-class manufacturers.

[Design and application of a cake-shaping apparatus for drug-separated moxibustion].

PubMed

Zhu, Ai-Jun; Lu, Xiao-Dong

2008-08-01

Acupuncturist makes herbal cakes with traditional manual way, with such disadvantages as slow in making, varying in thickness and size of the cake. When the patients are treated with medical cake-separated moxibustion, they will be unevenly affected by the heat and the patient easily suffers from burning. These hinder clinically wide application of cake-separated moxibustion. With practice of many years, the authors design and make a kind of manual cake-shaping apparatus which can rapidly and conveniently make uniform medical cake, with simple technique, ingenious structure and normal material.

Practical applications of surface analytic tools in tribology

NASA Technical Reports Server (NTRS)

Ferrante, J.

1980-01-01

Many of the currently, widely used tools available for surface analysis are described. Those which have the highest applicability for giving elemental and/or compound analysis for problems of interest in tribology and are truly surface sensitive (that is, less than 10 atomic layers) are presented. The latter group is evaluated in detail in terms of strengths and weaknesses. Emphasis is placed on post facto analysis of experiments performed under 'real' conditions (e.g., in air with lubricants). It is further indicated that such equipment could be used for screening and quality control.

[Applications of DNA identification technology in protection of wild animals].

PubMed

Ni, Ping-Ya; Pei, Li; Ge, Wen-Dong; Zhang, Ying; Yang, Xue-Ying; Xu, Xiao-Yu; Tu, Zheng

2011-12-01

With the development of biotechnology, forensic DNA identification technology in protection of wild animals has been used more and more widely. This review introduces the global status of wildlife crime and the relevant protection to wildlife, outlines the practical applications of forensic DNA identification technology with regard to species identification, determination of geographic origin, individual identification and paternity identification. It focus on the techniques commonly used in DNA typing and their merits and demerits, as well as the problems and prospects of forensic DNA technology for wildlife conservation.

Alkali metal vapors - Laser spectroscopy and applications

NASA Technical Reports Server (NTRS)

Stwalley, W. C.; Koch, M. E.

1980-01-01

The paper examines the rapidly expanding use of lasers for spectroscopic studies of alkali metal vapors. Since the alkali metals (lithium, sodium, potassium, rubidium and cesium) are theoretically simple ('visible hydrogen'), readily ionized, and strongly interacting with laser light, they represent ideal systems for quantitative understanding of microscopic interconversion mechanisms between photon (e.g., solar or laser), chemical, electrical and thermal energy. The possible implications of such understanding for a wide variety of practical applications (sodium lamps, thermionic converters, magnetohydrodynamic devices, new lasers, 'lithium waterfall' inertial confinement fusion reactors, etc.) are also discussed.

Low-frequency 1/f noise in graphene devices

NASA Astrophysics Data System (ADS)

Balandin, Alexander A.

2013-08-01

Low-frequency noise with a spectral density that depends inversely on frequency has been observed in a wide variety of systems including current fluctuations in resistors, intensity fluctuations in music and signals in human cognition. In electronics, the phenomenon, which is known as 1/f noise, flicker noise or excess noise, hampers the operation of numerous devices and circuits, and can be a significant impediment to the development of practical applications from new materials. Graphene offers unique opportunities for studying 1/f noise because of its two-dimensional structure and widely tunable two-dimensional carrier concentration. The creation of practical graphene-based devices will also depend on our ability to understand and control the low-frequency noise in this material system. Here, the characteristic features of 1/f noise in graphene and few-layer graphene are reviewed, and the implications of such noise for the development of graphene-based electronics including high-frequency devices and sensors are examined.

Update on wide- and ultra-widefield retinal imaging

PubMed Central

Shoughy, Samir S; Arevalo, J Fernando; Kozak, Igor

2015-01-01

The peripheral retina is the site of pathology in many ocular diseases and ultra-widefield (UWF) imaging is one of the new technologies available to ophthalmologists to manage some of these diseases. Currently, there are several imaging systems used in practice for the purpose of diagnostic, monitoring disease progression or response to therapy, and telemedicine. These include modalities for both adults and pediatric patients. The current systems are capable of producing wide- and UWF color fundus photographs, fluorescein and indocyanine green angiograms, and autofluorescence images. Using this technology, important clinical observations have been made in diseases such as diabetic retinopathy, uveitides, retinal vascular occlusions and tumors, intraocular tumors, retinopathy of prematurity, and age-related macular degeneration. Widefield imaging offers excellent postoperative documentation of retinal detachment surgery. New applications will soon be available to integrate this technology into large volume routine clinical practice. PMID:26458474

Low-frequency 1/f noise in graphene devices.

PubMed

Balandin, Alexander A

2013-08-01

Low-frequency noise with a spectral density that depends inversely on frequency has been observed in a wide variety of systems including current fluctuations in resistors, intensity fluctuations in music and signals in human cognition. In electronics, the phenomenon, which is known as 1/f noise, flicker noise or excess noise, hampers the operation of numerous devices and circuits, and can be a significant impediment to the development of practical applications from new materials. Graphene offers unique opportunities for studying 1/f noise because of its two-dimensional structure and widely tunable two-dimensional carrier concentration. The creation of practical graphene-based devices will also depend on our ability to understand and control the low-frequency noise in this material system. Here, the characteristic features of 1/f noise in graphene and few-layer graphene are reviewed, and the implications of such noise for the development of graphene-based electronics including high-frequency devices and sensors are examined.

One‐Dimensional Ferroelectric Nanostructures: Synthesis, Properties, and Applications

PubMed Central

Liang, Longyue; Kang, Xueliang

2016-01-01

One‐dimensional (1D) ferroelectric nanostructures, such as nanowires, nanorods, nanotubes, nanobelts, and nanofibers, have been studied with increasing intensity in recent years. Because of their excellent ferroelectric, ferroelastic, pyroelectric, piezoelectric, inverse piezoelectric, ferroelectric‐photovoltaic (FE‐PV), and other unique physical properties, 1D ferroelectric nanostructures have been widely used in energy‐harvesting devices, nonvolatile random access memory applications, nanoelectromechanical systems, advanced sensors, FE‐PV devices, and photocatalysis mechanisms. This review summarizes the current state of 1D ferroelectric nanostructures and provides an overview of the synthesis methods, properties, and practical applications of 1D nanostructures. Finally, the prospects for future investigations are outlined. PMID:27812477

Web GIS in practice VIII: HTML5 and the canvas element for interactive online mapping.

PubMed

Boulos, Maged N Kamel; Warren, Jeffrey; Gong, Jianya; Yue, Peng

2010-03-03

HTML5 is being developed as the next major revision of HTML (Hypertext Markup Language), the core markup language of the World Wide Web. It aims at reducing the need for proprietary, plug-in-based rich Internet application (RIA) technologies such as Adobe Flash. The canvas element is part of HTML5 and is used to draw graphics using scripting (e.g., JavaScript). This paper introduces Cartagen, an open-source, vector-based, client-side framework for rendering plug-in-free, offline-capable, interactive maps in native HTML5 on a wide range of Web browsers and mobile phones. Cartagen was developed at MIT Media Lab's Design Ecology group. Potential applications of the technology as an enabler for participatory online mapping include mapping real-time air pollution, citizen reporting, and disaster response, among many other possibilities.

Tailoring plasmonic properties of nanobeam composites by the sliding disorder

NASA Astrophysics Data System (ADS)

Gric, Tatjana; Hess, Ortwin

2017-11-01

Nanobeam composites are important for designing sensing, nonlinear, and emission functionalities. Here, we describe a method for tuning the plasmonic properties of a silver nanobeam-based metamaterial. Such metamaterials open the wide avenues for a variety of applications in the fields of bio- and chemical sensing, nonlinearity enhancement, and fluorescence control. Specifically, we present the boundary between two nanobeam composites stacked together and exhibiting the sliding disorder. The modes are tunable. We simulated the solutions of surface plasmon polaritons (SPP) modes and their propagations. The configuration proposed here makes a breakthrough of the conventional configuration allowing for optimizations of SPP properties and making SPP application more flexible in practices. The wide plasmonic tuning range of nanobeam composites makes them promising in metamaterial-based optoelectronic devices. The plasma frequency is found to be tailored by the sliding disorder.

The "tele" factor in surgery today and tomorrow: implications for surgical training and education.

PubMed

Gambadauro, Pietro; Torrejón, Rafael

2013-02-01

New technological developments in the field of telecommunications have allowed a wide range of potentially novel surgical applications. The introduction of the World Wide Web in 1991 has been followed by a steep rise of the relevance of telemedicine, as it is witnessed in the latest scientific literature. There has been a consistent, positive trend in publications dealing, respectively, with telemedicine and the Internet. This article reviews telemedicine and other surgery-related innovations that benefit from telecommunication advances, and presents data from a quantitative bibliographic analysis. A number of applications, such as telementoring, teleproctoring and robotic telesurgery are described and their huge potentials are discussed. The integration between surgery and telecommunications could constitute one of the major achievements of modern medicine, and its safe integration into clinical practice should be a priority for modern surgeons.

Revisit of Machine Learning Supported Biological and Biomedical Studies.

PubMed

Yu, Xiang-Tian; Wang, Lu; Zeng, Tao

2018-01-01

Generally, machine learning includes many in silico methods to transform the principles underlying natural phenomenon to human understanding information, which aim to save human labor, to assist human judge, and to create human knowledge. It should have wide application potential in biological and biomedical studies, especially in the era of big biological data. To look through the application of machine learning along with biological development, this review provides wide cases to introduce the selection of machine learning methods in different practice scenarios involved in the whole biological and biomedical study cycle and further discusses the machine learning strategies for analyzing omics data in some cutting-edge biological studies. Finally, the notes on new challenges for machine learning due to small-sample high-dimension are summarized from the key points of sample unbalance, white box, and causality.

Brownfields to green fields: Realising wider benefits from practical contaminant phytomanagement strategies.

PubMed

Cundy, A B; Bardos, R P; Puschenreiter, M; Mench, M; Bert, V; Friesl-Hanl, W; Müller, I; Li, X N; Weyens, N; Witters, N; Vangronsveld, J

2016-12-15

Gentle remediation options (GROs) are risk management strategies or technologies involving plant (phyto-), fungi (myco-), and/or bacteria-based methods that result in a net gain (or at least no gross reduction) in soil function as well as effective risk management. GRO strategies can be customised along contaminant linkages, and can generate a range of wider economic, environmental and societal benefits in contaminated land management (and in brownfields management more widely). The application of GROs as practical on-site remedial solutions is still limited however, particularly in Europe and at trace element (typically metal and metalloid) contaminated sites. This paper discusses challenges to the practical adoption of GROs in contaminated land management, and outlines the decision support tools and best practice guidance developed in the European Commission FP7-funded GREENLAND project aimed at overcoming these challenges. The GREENLAND guidance promotes a refocus from phytoremediation to wider GROs- or phyto-management based approaches which place realisation of wider benefits at the core of site design, and where gentle remediation technologies can be applied as part of integrated, mixed, site risk management solutions or as part of "holding strategies" for vacant sites. The combination of GROs with renewables, both in terms of biomass generation but also with green technologies such as wind and solar power, can provide a range of economic and other benefits and can potentially support the return of low-level contaminated sites to productive usage, while combining GROs with urban design and landscape architecture, and integrating GRO strategies with sustainable urban drainage systems and community gardens/parkland (particularly for health and leisure benefits), has large potential for triggering GRO application and in realising wider benefits in urban and suburban systems. Quantifying these wider benefits and value (above standard economic returns) will be important in leveraging funding for GRO application and soft site end-use more widely at vacant or underutilized sites. Copyright © 2016 Elsevier Ltd. All rights reserved.

Multiscale Hierarchical Design of a Flexible Piezoresistive Pressure Sensor with High Sensitivity and Wide Linearity Range.

PubMed

Shi, Jidong; Wang, Liu; Dai, Zhaohe; Zhao, Lingyu; Du, Mingde; Li, Hongbian; Fang, Ying

2018-05-30

Flexible piezoresistive pressure sensors have been attracting wide attention for applications in health monitoring and human-machine interfaces because of their simple device structure and easy-readout signals. For practical applications, flexible pressure sensors with both high sensitivity and wide linearity range are highly desirable. Herein, a simple and low-cost method for the fabrication of a flexible piezoresistive pressure sensor with a hierarchical structure over large areas is presented. The piezoresistive pressure sensor consists of arrays of microscale papillae with nanoscale roughness produced by replicating the lotus leaf's surface and spray-coating of graphene ink. Finite element analysis (FEA) shows that the hierarchical structure governs the deformation behavior and pressure distribution at the contact interface, leading to a quick and steady increase in contact area with loads. As a result, the piezoresistive pressure sensor demonstrates a high sensitivity of 1.2 kPa -1 and a wide linearity range from 0 to 25 kPa. The flexible pressure sensor is applied for sensitive monitoring of small vibrations, including wrist pulse and acoustic waves. Moreover, a piezoresistive pressure sensor array is fabricated for mapping the spatial distribution of pressure. These results highlight the potential applications of the flexible piezoresistive pressure sensor for health monitoring and electronic skin. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

ON IDENTIFIABILITY OF NONLINEAR ODE MODELS AND APPLICATIONS IN VIRAL DYNAMICS

PubMed Central

MIAO, HONGYU; XIA, XIAOHUA; PERELSON, ALAN S.; WU, HULIN

2011-01-01

Ordinary differential equations (ODE) are a powerful tool for modeling dynamic processes with wide applications in a variety of scientific fields. Over the last 2 decades, ODEs have also emerged as a prevailing tool in various biomedical research fields, especially in infectious disease modeling. In practice, it is important and necessary to determine unknown parameters in ODE models based on experimental data. Identifiability analysis is the first step in determing unknown parameters in ODE models and such analysis techniques for nonlinear ODE models are still under development. In this article, we review identifiability analysis methodologies for nonlinear ODE models developed in the past one to two decades, including structural identifiability analysis, practical identifiability analysis and sensitivity-based identifiability analysis. Some advanced topics and ongoing research are also briefly reviewed. Finally, some examples from modeling viral dynamics of HIV, influenza and hepatitis viruses are given to illustrate how to apply these identifiability analysis methods in practice. PMID:21785515

Genetic screening and diagnosis in epilepsy?

PubMed

Sisodiya, Sanjay M

2015-04-01

Genetic discovery has been extremely rapid over the last year, with many new discoveries illuminating novel mechanisms and pathways. In particular, the application of whole exome and whole genome sequencing has identified many new genetic causes of the epilepsies. As such methods become increasingly available, it will be critical for practicing neurologists to be acquainted with them. This review surveys some important developments over the last year. The range of tests available to the clinician is wide, and likely soon to be dominated by whole exome and whole genome sequencing. Both whole exome and whole genome sequencing have usually proven to be more powerful than most existing tests. Many new genes have been implicated in the epilepsies, with emerging evidence of the involvement of particular multigene pathways. For the practicing clinician, it will be important to appreciate progress in the field, and to prepare for the application of novel genetic testing in clinical practice, as genetic data are likely to contribute importantly for many people with epilepsy.

Building Shared Experience to Advance Practical Application of Pathway-Based Toxicology: Liver Toxicity Mode-of-Action

PubMed Central

Willett, Catherine; Rae, Jessica Caverly; Goyak, Katy O.; Minsavage, Gary; Westmoreland, Carl; Andersen, Melvin; Avigan, Mark; Duché, Daniel; Harris, Georgina; Hartung, Thomas; Jaeschke, Hartmut; Kleensang, Andre; Landesmann, Brigitte; Martos, Suzanne; Matevia, Marilyn; Toole, Colleen; Rowan, Andrew; Schultz, Terry; Seed, Jennifer; Senior, John; Shah, Imran; Subramanian, Kalyanasundaram; Vinken, Mathieu; Watkins, Paul

2016-01-01

Summary A workshop sponsored by the Human Toxicology Project Consortium (HTPC), “Building Shared Experience to Advance Practical Application of Pathway-Based Toxicology: Liver Toxicity Mode-of-Action” brought together experts from a wide range of perspectives to inform the process of pathway development and to advance two prototype pathways initially developed by the European Commission Joint Research Center (JRC): liver-specific fibrosis and steatosis. The first half of the workshop focused on the theory and practice of pathway development; the second on liver disease and the two prototype pathways. Participants agreed pathway development is extremely useful for organizing information and found that focusing the theoretical discussion on a specific AOP is helpful. It is important to include several perspectives during pathway development, including information specialists, pathologists, human health and environmental risk assessors, and chemical and product manufacturers, to ensure the biology is well captured and end use is considered. PMID:24535319

The Common Framework for Earth Observation Data

NASA Astrophysics Data System (ADS)

Gallo, J.; Stryker, T. S.; Sherman, R.

2016-12-01

Each year, the Federal government records petabytes of data about our home planet. That massive amount of data in turn provides enormous benefits to society through weather reports, agricultural forecasts, air and water quality warnings, and countless other applications. To maximize the ease of transforming the data into useful information for research and for public services, the U.S. Group on Earth Observations released the first Common Framework for Earth Observation Data in March 2016. The Common Framework recommends practices for Federal agencies to adopt in order to improve the ability of all users to discover, access, and use Federal Earth observations data. The U.S. Government is committed to making data from civil Earth observation assets freely available to all users. Building on the Administration's commitment to promoting open data, open science, and open government, the Common Framework goes beyond removing financial barriers to data access, and attempts to minimize the technical impediments that limit data utility. While Earth observation systems typically collect data for a specific purpose, these data are often also useful in applications unforeseen during development of the systems. Managing and preserving these data with a common approach makes it easier for a wide range of users to find, evaluate, understand, and utilize the data, which in turn leads to the development of a wide range of innovative applications. The Common Framework provides Federal agencies with a recommended set of standards and practices to follow in order to achieve this goal. Federal agencies can follow these best practices as they develop new observing systems or modernize their existing collections of data. This presentation will give a brief on the context and content of the Common Framework, along with future directions for implementation and keeping its recommendations up-to-date with developing technology.

Information security concepts and practices: the case of a provincial multi-specialty hospital.

PubMed

Cavalli, Enrico; Mattasoglio, Andrea; Pinciroli, Francesco; Spaggiari, Piergiorgio

2004-03-31

In recent years, major and widely accepted information security understandings and achievements confirm that the problem is complex. They clarify that technologies are fundamental tools, but management processes have even bigger relevance, as also prestigious international magazines dossier clearly explained recently. Such a magazine attention outlines the wide impact that the subject has on watchful decision makers. ISO17799 is an emerging standard in information security. In principle there are no reasons for considering it not applicable to the health care sector. In practice, because of both the just conceptual level of the standard and the peculiarities of the health care data and institutions, a lot of analysis and design work need to be invested any time a health care institution decides to deal with the subject. CEN/ENV 12924 is another emerging standard certainly more on the spot of the health care. Nevertheless, it also asks for evident further investigation. The practical case of information security design, implementation, management, and auditing inside a multi-specialty provincial Italian hospital will be described.

Health and wellness policy ethics.

PubMed

Cavico, Frank J; Mujtaba, Bahaudin G

2013-08-01

This perspective is an ethical brief overview and examination of "wellness" policies in the modern workplace using practical examples and a general application of utilitarianism. Many employers are implementing policies that provide incentives to employees who lead a "healthy" lifestyle. The authors address how these policies could adversely affect "non-healthy" employees. There are a wide variety of ethical issues that impact wellness policies and practices in the workplace. The authors conclude that wellness programs can be ethical, while also providing a general reflective analysis of healthcare challenges in order to reflect on the externalities associated with such policies in the workplace.

Metasurface Salisbury screen: achieving ultra-wideband microwave absorption.

PubMed

Zhou, Ziheng; Chen, Ke; Zhao, Junming; Chen, Ping; Jiang, Tian; Zhu, Bo; Feng, Yijun; Li, Yue

2017-11-27

The metasurfaces have recently been demonstrated to provide full control of the phase responses of electromagnetic (EM) wave scattering over subwavelength scales, enabling a wide range of practical applications. Here, we propose a comprehensive scheme for the efficient and flexible design of metasurface Salisbury screen (MSS) capable of absorbing the impinging EM wave in an ultra-wide frequency band. We show that properly designed reflective metasurface can be used to substitute the metallic ground of conventional Salisbury screen for generating diverse resonances in a desirable way, thus providing large controllability over the absorption bandwidth. Based on this concept, we establish an equivalent circuit model to qualitatively analysis the resonances in MSS and design algorithms to optimize the overall performance of the MSS. Experiments have been carried out to demonstrate that the absorption bandwidth from 6 GHz to 30 GHz with an efficiency higher than 85% can be achieved by the proposal, which is apparently much larger than that of conventional Salisbury screen (7 GHz - 17 GHz). The proposed concept of MSS could offer opportunities for flexibly designing thin electromagnetic absorbers with simultaneously ultra-wide bandwidth, polarization insensitivity, and wide incident angle, exhibiting promising potentials for many applications such as in EM compatibility, stealth technique, etc.

An effective iodide formulation for killing Bacillus and Geobacillus spores over a wide temperature range.

PubMed

Kida, N; Mochizuki, Y; Taguchi, F

2004-01-01

To develop a sporicidal reagent which shows potent activity against bacterial spores not only at ambient temperatures but also at low temperatures. Suspension tests on spores of Bacillus and Geobacillus were conducted with the reagent based on a previously reported agent (N. Kida, Y. Mochizuki and F. Taguchi, Microbiology and Immunology 2003; 47: 279-283). The modified reagent (tentatively designated as the KMT reagent) was composed of 50 mmol l(-1) EDTA-2Na, 50 mmol l(-1) ferric chloride hexahydrate (FeCl(3).6H(2)O), 50 mmol l(-1) potassium iodide (KI) and 50% ethanol in 0.85% NaCl solution at pH 0.3. The KMT reagent showed significant sporicidal activity against three species of Bacillus and Geobacillus spores over a wide range of temperature. The KMT reagent had many practical advantages, i.e. activity was much less affected by organic substances than was sodium hypochlorite, it did not generate any harmful gas and it was stable for a long period at ambient temperatures. The mechanism(s) of sporicidal activity of the KMT reagent was considered to be based on active iodine species penetrating the spores with enhanced permeability of the spore cortex by a synergistic effect of acid, ethanol and generated active oxygen. The data suggest that the KMT reagent shows potent sporicidal activity over a wide range temperatures and possesses many advantages for practical applications. The results indicate development of a highly applicable sporicidal reagent against Bacillus and Geobacillus spores.

Educational aspects of molecular simulation

NASA Astrophysics Data System (ADS)

Allen, Michael P.

This article addresses some aspects of teaching simulation methods to undergraduates and graduate students. Simulation is increasingly a cross-disciplinary activity, which means that the students who need to learn about simulation methods may have widely differing backgrounds. Also, they may have a wide range of views on what constitutes an interesting application of simulation methods. Almost always, a successful simulation course includes an element of practical, hands-on activity: a balance always needs to be struck between treating the simulation software as a 'black box', and becoming bogged down in programming issues. With notebook computers becoming widely available, students often wish to take away the programs to run themselves, and access to raw computer power is not the limiting factor that it once was; on the other hand, the software should be portable and, if possible, free. Examples will be drawn from the author's experience in three different contexts. (1) An annual simulation summer school for graduate students, run by the UK CCP5 organization, in which practical sessions are combined with an intensive programme of lectures describing the methodology. (2) A molecular modelling module, given as part of a doctoral training centre in the Life Sciences at Warwick, for students who might not have a first degree in the physical sciences. (3) An undergraduate module in Physics at Warwick, also taken by students from other disciplines, teaching high performance computing, visualization, and scripting in the context of a physical application such as Monte Carlo simulation.

Making trials matter: pragmatic and explanatory trials and the problem of applicability

PubMed Central

Treweek, Shaun; Zwarenstein, Merrick

2009-01-01

Randomised controlled trials are the best research design for decisions about the effect of different interventions but randomisation does not, of itself, promote the applicability of a trial's results to situations other than the precise one in which the trial was done. While methodologists and trialists have rightly paid great attention to internal validity, much less has been given to applicability. This narrative review is aimed at those planning to conduct trials, and those aiming to use the information in them. It is intended to help the former group make their trials more widely useful and to help the latter group make more informed decisions about the wider use of existing trials. We review the differences between the design of most randomised trials (which have an explanatory attitude) and the design of trials more able to inform decision making (which have a pragmatic attitude) and discuss approaches used to assert applicability of trial results. If we want evidence from trials to be used in clinical practice and policy, trialists should make every effort to make their trial widely applicable, which means that more trials should be pragmatic in attitude. PMID:19493350

Superconducting Detectors Come of Age, or Ready to Leave the Lab

NASA Technical Reports Server (NTRS)

Moseley, Samuel H.

2008-01-01

Cryogenically cooled superconducting detectors have become essential tools for a wide range of measurement applications, ranging from quantum limited heterodyne detection in the millimeter range to direct searches for dark matter with superconducting phonon detectors operating at 20 mK. Superconducting detectors have several fundamental and practical advantages which have resulted in their rapid adoption by experimenters. Their excellent performance arises in part from reductions in noise resulting from their low operating temperatures, but unique superconducting properties provide a wide range of mechanisms for detection. For example, the steep dependence of resistance with temperature on the superconductor normal transition provides a sensitive thermometer for calorimetric and bolometric applications. Parametric changes in the properties of superconducting resonators provide a mechanism for high sensitivity detection of submillil.neter photons. From a practical point of view, the use of superconducting detectors has grown rapidly because many of these devices couple well to SQUID amplifiers, which are easily integrated with the detectors. These SQUID-based amplifiers and multiplexers have matured with the detectors; they are convenient to use, and have excellent noise performance. The first generation of fully integrated large-scale superconducting detection systems is now being deployed. Improved understanding of the operation of these detectors, combined with rapidly improving fabrication techniques, is quickly expanding the capability of these detectors. I will review the development and application of superconductor-based detectors, the ultimate limits to their performance, and consider prospects for their future applications. Continued advances promise to enable important new measurements in physics, and with appropriate advances in cryogenic infrastncturem, ay result in the use of these detectors in everyday monitoring applications.

Orientation based on nursing diagnoses. Old concepts in today's practice.

PubMed

Anderson, L K; Vincent, N

1991-10-01

Although many operating room orientation programs contain content necessary to meet accrediting guidelines, very few tie the nursing process to the content. Our orientation is structured within a nursing framework (ie, Dr Gordon's "Eleven Functional Health Patterns") and emphasizes nursing diagnoses, theory, and clinical competencies. Although the new orientation program has been in effect for only two years, we feel the following list reflects the positive outcomes so far: decreased staff turnover (ie, one nurse out of 26 full-time equivalents in 18 months), increased success in recruiting nurses into the operating room (ie, multiple applicants as positions open), new nurses demonstrate comfort with basic perioperative nursing practice with-in six months, and nurses who did not complete new orientation program are requesting all or portions of the content. By using this plan, essential aspects of perioperative practice are consistent with hospital-wide nursing practice, practice standards for the operating room, and accrediting standards.

Skin care practices in newborn nurseries and mother-baby units in Maryland.

PubMed

Khalifian, S; Golden, W C; Cohen, B A

2017-06-01

Skin provides several important homeostatic functions to the developing neonate. However, no consensus guidelines exist in the United States for skin care in the healthy term newborn. We performed a study of skin and umbilical cord care (including bathing practices, vernix removal and antiseptic cord application) in newborn nurseries and mother-baby units throughout the state of Maryland to determine practices in a variety of clinical settings and assess if uniformity in skin care exists. These data were then assessed in the context of a review of the current literature. We received responses from over 90% of nurseries across the state. In our cohort, practices varied widely between institutions and specific populations, and often were not evidence-based or were contrary to best practices discussed in the scientific literature. The frequent departures from evidence that occur regarding the aforementioned practices are likely due to a lack of consensus on these issues as well as limited data on such practices, further highlighting the need for data-driven guidelines on newborn skin care.

Retrieval Practice, with or without Mind Mapping, Boosts Fact Learning in Primary School Children

PubMed Central

Ritchie, Stuart J.; Della Sala, Sergio; McIntosh, Robert D.

2013-01-01

Retrieval practice is a method of study in which testing is incorporated into the learning process. This method is known to facilitate recall for facts in adults and in secondary-school-age children, but existing studies in younger children are somewhat limited in their practical applicability. In two studies of primary school-age children of 8–12 years, we tested retrieval practice along with another study technique, mind mapping, which is more widely-used, but less well-evidenced. Children studied novel geographical facts, with or without retrieval practice and with or without mind mapping, in a crossed-factorial between-subjects design. In Experiment 1, children in the retrieval practice condition recalled significantly more facts four days later. In Experiment 2, this benefit was replicated at one and five weeks in a different, larger sample of schoolchildren. No consistent effects of mind mapping were observed. These results underline the effectiveness of retrieval practice for fact learning in young children. PMID:24265738

Sustainable construction: construction and demolition waste reconsidered.

PubMed

del Río Merino, Mercedes; Izquierdo Gracia, Pilar; Weis Azevedo, Isabel Salto

2010-02-01

Construction activity in Europe has increased substantially in the past decade. Likewise, there has also been a commensurate rise in the generation of construction and demolition waste (C&DW). This, together with the fact that in many European countries the rate of recycling and reuse of C&DW is still quite low has engendered a serious environmental problem and a motivation to develop strategies and management plans to solve it. Due to its composition, there is a significant potential to reuse and/or recycle C&DW, and thereby, contribute to improving the sustainability of construction and development, but practical procedures are not yet widely known or practiced in the construction industry. This article (a) summarizes the different applications that are presently practiced to optimize the recovery and/or application of C&DW for reuse, and (b) proposes various measures and strategies to improve the processing of this waste. The authors suggest that to enhance environmental effectiveness, a conscious and comprehensive C&DW management plan should be implemented in each jurisdiction. More precisely, this study presents a holistic approach towards C&DW management, through which environmental benefits can be achieved through the application of new construction methods that can contribute to sustainable growth.

A Review of Agents for Palliative Sedation/Continuous Deep Sedation: Pharmacology and Practical Applications.

PubMed

Bodnar, John

2017-03-01

Continuous deep sedation at the end of life is a specific form of palliative sedation requiring a care plan that essentially places and maintains the patient in an unresponsive state because their symptoms are refractory to any other interventions. Because this application is uncommon, many providers may lack practical experience in this specialized area and resources they can access are outdated, nonspecific, and/or not comprehensive. The purpose of this review is to provide an evidence- and experience-based reference that specifically addresses those medications and regimens and their practical applications for this very narrow, but vital, aspect of hospice care. Patient goals in a hospital and hospice environments are different, so the manner in which widely used sedatives are dosed and applied can differ greatly as well. Parameters applied in end-of-life care that are based on experience and a thorough understanding of the pharmacology of those medications will differ from those applied in an intensive care unit or other medical environments. By recognizing these different goals and applying well-founded regimens geared specifically for end-of-life sedation, we can address our patients' symptoms in a more timely and efficacious manner.

Unusual continuous dual absorption peaks in Ca-doped BiFeO3 nanostructures for broadened microwave absorption

NASA Astrophysics Data System (ADS)

Li, Zhong-Jun; Hou, Zhi-Ling; Song, Wei-Li; Liu, Xing-Da; Cao, Wen-Qiang; Shao, Xiao-Hong; Cao, Mao-Sheng

2016-05-01

Electromagnetic absorption materials have received increasing attention owing to their wide applications in aerospace, communication and the electronics industry, and multiferroic materials with both polarization and magnetic properties are considered promising ceramics for microwave absorption application. However, the insufficient absorption intensity coupled with the narrow effective absorption bandwidth has limited the development of high-performance multiferroic materials for practical microwave absorption. To address such issues, in the present work, we utilize interfacial engineering in BiFeO3 nanoparticles via Ca doping, with the purpose of tailoring the phase boundary. Upon Ca-substitution, the co-existence of both R3c and P4mm phases has been confirmed to massively enhance both dielectric and magnetic properties via manipulating the phase boundary and the destruction of the spiral spin structure. Unlike the commonly reported magnetic/dielectric hybrid microwave absorption composites, Bi0.95Ca0.05FeO3 has been found to deliver unusual continuous dual absorption peaks at a small thickness (1.56 mm), which has remarkably broadened the effective absorption bandwidth (8.7-12.1 GHz). The fundamental mechanisms based on the phase boundary engineering have been discussed, suggesting a novel platform for designing advanced multiferroic materials with wide applications.Electromagnetic absorption materials have received increasing attention owing to their wide applications in aerospace, communication and the electronics industry, and multiferroic materials with both polarization and magnetic properties are considered promising ceramics for microwave absorption application. However, the insufficient absorption intensity coupled with the narrow effective absorption bandwidth has limited the development of high-performance multiferroic materials for practical microwave absorption. To address such issues, in the present work, we utilize interfacial engineering in BiFeO3 nanoparticles via Ca doping, with the purpose of tailoring the phase boundary. Upon Ca-substitution, the co-existence of both R3c and P4mm phases has been confirmed to massively enhance both dielectric and magnetic properties via manipulating the phase boundary and the destruction of the spiral spin structure. Unlike the commonly reported magnetic/dielectric hybrid microwave absorption composites, Bi0.95Ca0.05FeO3 has been found to deliver unusual continuous dual absorption peaks at a small thickness (1.56 mm), which has remarkably broadened the effective absorption bandwidth (8.7-12.1 GHz). The fundamental mechanisms based on the phase boundary engineering have been discussed, suggesting a novel platform for designing advanced multiferroic materials with wide applications. Electronic supplementary information (ESI) available. See DOI: 10.1039/c6nr00223d

Closing the Gap Between Research and Field Applications for Multi-UAV Cooperative Missions

DTIC Science & Technology

2013-09-01

IMU Inertial Measurement Units INCOSE International Council on Systems Engineering ISR Intelligence Surveillance and Reconnaissance ISTAR...light-weight and low-cost inertial measurement units ( IMUs ) are widely adopted for navigation of small- scale UAVs. Low-costs IMUs are characterized...by high measurement noises and large measurement biases. Hence pure initial navigation using low-cost IMUs drifts rapidly. In practice, inertial

Summary of strategies for planning Productivity Improvement and Quality Enhancement (PIQE)

NASA Technical Reports Server (NTRS)

1986-01-01

The Summary of NASA Strategies for Productivity Improvement and Quality Enhancement respond to NASA's eighth top goal: Establish NASA as a leader in the development and application of advanced technology and management practices which contribute to significant increases in both Agency and national productivity. The Strategies provide the framework for development of the agency-wide Productivity Improvement and Quality Enhancement (PIQE) Plans.

Laser diffraction of acicular particles: practical applications

NASA Astrophysics Data System (ADS)

Scott, David M.; Matsuyama, Tatsushi

2014-08-01

Commercial laser diffraction instruments are widely used to measure particle size distribution (PSD), but the results are distorted for non-spherical (acicular) particles often encountered in practical applications. Consequently the distribution, which is reported in terms of equivalent spherical diameter, requires interpretation. For rod-like and plate-like particles, the PSD tends to be bi-modal, with the two modal sizes closely related to the median length and width, or width and thickness, of the particles. Furthermore, it is found that the bi-modal PSD for at least one instrument can typically be approximated by a bi-lognormal distribution. By fitting such a function to the reported distribution, one may extract quantitative information useful for process or product development. This approach is illustrated by examples of such measurement on industrial samples of polymer particles, crystals, bacteria, and clays.

A survey of enabling technologies in synthetic biology

PubMed Central

2013-01-01

Background Realizing constructive applications of synthetic biology requires continued development of enabling technologies as well as policies and practices to ensure these technologies remain accessible for research. Broadly defined, enabling technologies for synthetic biology include any reagent or method that, alone or in combination with associated technologies, provides the means to generate any new research tool or application. Because applications of synthetic biology likely will embody multiple patented inventions, it will be important to create structures for managing intellectual property rights that best promote continued innovation. Monitoring the enabling technologies of synthetic biology will facilitate the systematic investigation of property rights coupled to these technologies and help shape policies and practices that impact the use, regulation, patenting, and licensing of these technologies. Results We conducted a survey among a self-identifying community of practitioners engaged in synthetic biology research to obtain their opinions and experiences with technologies that support the engineering of biological systems. Technologies widely used and considered enabling by survey participants included public and private registries of biological parts, standard methods for physical assembly of DNA constructs, genomic databases, software tools for search, alignment, analysis, and editing of DNA sequences, and commercial services for DNA synthesis and sequencing. Standards and methods supporting measurement, functional composition, and data exchange were less widely used though still considered enabling by a subset of survey participants. Conclusions The set of enabling technologies compiled from this survey provide insight into the many and varied technologies that support innovation in synthetic biology. Many of these technologies are widely accessible for use, either by virtue of being in the public domain or through legal tools such as non-exclusive licensing. Access to some patent protected technologies is less clear and use of these technologies may be subject to restrictions imposed by material transfer agreements or other contract terms. We expect the technologies considered enabling for synthetic biology to change as the field advances. By monitoring the enabling technologies of synthetic biology and addressing the policies and practices that impact their development and use, our hope is that the field will be better able to realize its full potential. PMID:23663447

Potential biomedical applications of marine algae.

PubMed

Wang, Hui-Min David; Li, Xiao-Chun; Lee, Duu-Jong; Chang, Jo-Shu

2017-11-01

Functional components extracted from algal biomass are widely used as dietary and health supplements with a variety of applications in food science and technology. In contrast, the applications of algae in dermal-related products have received much less attention, despite that algae also possess high potential for the uses in anti-infection, anti-aging, skin-whitening, and skin tumor treatments. This review, therefore, focuses on integrating studies on algae pertinent to human skin care, health and therapy. The active compounds in algae related to human skin treatments are mentioned and the possible mechanisms involved are described. The main purpose of this review is to identify serviceable algae functions in skin treatments to facilitate practical applications in this high-potential area. Copyright © 2017 Elsevier Ltd. All rights reserved.

Genetic literacy and competency.

PubMed

Kaye, Celia; Korf, Bruce

2013-12-01

Since the sequencing of the human genome was completed, progress toward understanding the genetic contributions to both rare and common disorders has accelerated dramatically. That understanding will lead to new approaches to diagnosis and management, which will be incorporated into day-to-day medical practice. Moreover, the mindset with regard to genetic contributions to health and disease has shifted from 1 gene at a time to genome wide. However, most practicing pediatricians, and even many still in training, are likely to be unfamiliar with the concepts of genetics and genomics and their applications in medical practice. This article addresses the issues of genetic and genomic literacy and competencies for pediatricians and other primary care providers, as they prepare to work with their patients in the emerging world of genomic medicine.

Conceptual Comparison of Population Based Metaheuristics for Engineering Problems

PubMed Central

Green, Paul

2015-01-01

Metaheuristic algorithms are well-known optimization tools which have been employed for solving a wide range of optimization problems. Several extensions of differential evolution have been adopted in solving constrained and nonconstrained multiobjective optimization problems, but in this study, the third version of generalized differential evolution (GDE) is used for solving practical engineering problems. GDE3 metaheuristic modifies the selection process of the basic differential evolution and extends DE/rand/1/bin strategy in solving practical applications. The performance of the metaheuristic is investigated through engineering design optimization problems and the results are reported. The comparison of the numerical results with those of other metaheuristic techniques demonstrates the promising performance of the algorithm as a robust optimization tool for practical purposes. PMID:25874265

Conceptual comparison of population based metaheuristics for engineering problems.

PubMed

Adekanmbi, Oluwole; Green, Paul

2015-01-01

Metaheuristic algorithms are well-known optimization tools which have been employed for solving a wide range of optimization problems. Several extensions of differential evolution have been adopted in solving constrained and nonconstrained multiobjective optimization problems, but in this study, the third version of generalized differential evolution (GDE) is used for solving practical engineering problems. GDE3 metaheuristic modifies the selection process of the basic differential evolution and extends DE/rand/1/bin strategy in solving practical applications. The performance of the metaheuristic is investigated through engineering design optimization problems and the results are reported. The comparison of the numerical results with those of other metaheuristic techniques demonstrates the promising performance of the algorithm as a robust optimization tool for practical purposes.

New Best-Practices Guide for Photovoltaic System Operations and Maintenance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fact sheet summarizing technical report TP-7A40-67553. As solar photovoltaic (PV) systems have continued their transition from niche applications into large, mature markets in the United States, their potential as financial investments has risen accordingly. Mainstream investors, however, need to feel confident about the risk and return of solar photovoltaic (PV) systems before committing funds. A major influence on risk and return for PV is operations and maintenance (O&M) - but O&M practices and costs vary widely across the United States, making these variables difficult for investors to predict. To address this barrier to continued PV investment, the PV O&M Workingmore » Group has developed a new best-practices guide for PV O&M.« less

The clinical application of genome-wide sequencing for monogenic diseases in Canada: Position Statement of the Canadian College of Medical Geneticists

PubMed Central

Boycott, Kym; Hartley, Taila; Adam, Shelin; Bernier, Francois; Chong, Karen; Fernandez, Bridget A; Friedman, Jan M; Geraghty, Michael T; Hume, Stacey; Knoppers, Bartha M; Laberge, Anne-Marie; Majewski, Jacek; Mendoza-Londono, Roberto; Meyn, M Stephen; Michaud, Jacques L; Nelson, Tanya N; Richer, Julie; Sadikovic, Bekim; Skidmore, David L; Stockley, Tracy; Taylor, Sherry; van Karnebeek, Clara; Zawati, Ma'n H; Lauzon, Julie; Armour, Christine M

2015-01-01

Purpose and scope The aim of this Position Statement is to provide recommendations for Canadian medical geneticists, clinical laboratory geneticists, genetic counsellors and other physicians regarding the use of genome-wide sequencing of germline DNA in the context of clinical genetic diagnosis. This statement has been developed to facilitate the clinical translation and development of best practices for clinical genome-wide sequencing for genetic diagnosis of monogenic diseases in Canada; it does not address the clinical application of this technology in other fields such as molecular investigation of cancer or for population screening of healthy individuals. Methods of statement development Two multidisciplinary groups consisting of medical geneticists, clinical laboratory geneticists, genetic counsellors, ethicists, lawyers and genetic researchers were assembled to review existing literature and guidelines on genome-wide sequencing for clinical genetic diagnosis in the context of monogenic diseases, and to make recommendations relevant to the Canadian context. The statement was circulated for comment to the Canadian College of Medical Geneticists (CCMG) membership-at-large and, following incorporation of feedback, approved by the CCMG Board of Directors. The CCMG is a Canadian organisation responsible for certifying medical geneticists and clinical laboratory geneticists, and for establishing professional and ethical standards for clinical genetics services in Canada. Results and conclusions Recommendations include (1) clinical genome-wide sequencing is an appropriate approach in the diagnostic assessment of a patient for whom there is suspicion of a significant monogenic disease that is associated with a high degree of genetic heterogeneity, or where specific genetic tests have failed to provide a diagnosis; (2) until the benefits of reporting incidental findings are established, we do not endorse the intentional clinical analysis of disease-associated genes other than those linked to the primary indication; and (3) clinicians should provide genetic counselling and obtain informed consent prior to undertaking clinical genome-wide sequencing. Counselling should include discussion of the limitations of testing, likelihood and implications of diagnosis and incidental findings, and the potential need for further analysis to facilitate clinical interpretation, including studies performed in a research setting. These recommendations will be routinely re-evaluated as knowledge of diagnostic and clinical utility of clinical genome-wide sequencing improves. While the document was developed to direct practice in Canada, the applicability of the statement is broader and will be of interest to clinicians and health jurisdictions internationally. PMID:25951830

The clinical application of genome-wide sequencing for monogenic diseases in Canada: Position Statement of the Canadian College of Medical Geneticists.

PubMed

Boycott, Kym; Hartley, Taila; Adam, Shelin; Bernier, Francois; Chong, Karen; Fernandez, Bridget A; Friedman, Jan M; Geraghty, Michael T; Hume, Stacey; Knoppers, Bartha M; Laberge, Anne-Marie; Majewski, Jacek; Mendoza-Londono, Roberto; Meyn, M Stephen; Michaud, Jacques L; Nelson, Tanya N; Richer, Julie; Sadikovic, Bekim; Skidmore, David L; Stockley, Tracy; Taylor, Sherry; van Karnebeek, Clara; Zawati, Ma'n H; Lauzon, Julie; Armour, Christine M

2015-07-01

The aim of this Position Statement is to provide recommendations for Canadian medical geneticists, clinical laboratory geneticists, genetic counsellors and other physicians regarding the use of genome-wide sequencing of germline DNA in the context of clinical genetic diagnosis. This statement has been developed to facilitate the clinical translation and development of best practices for clinical genome-wide sequencing for genetic diagnosis of monogenic diseases in Canada; it does not address the clinical application of this technology in other fields such as molecular investigation of cancer or for population screening of healthy individuals. Two multidisciplinary groups consisting of medical geneticists, clinical laboratory geneticists, genetic counsellors, ethicists, lawyers and genetic researchers were assembled to review existing literature and guidelines on genome-wide sequencing for clinical genetic diagnosis in the context of monogenic diseases, and to make recommendations relevant to the Canadian context. The statement was circulated for comment to the Canadian College of Medical Geneticists (CCMG) membership-at-large and, following incorporation of feedback, approved by the CCMG Board of Directors. The CCMG is a Canadian organisation responsible for certifying medical geneticists and clinical laboratory geneticists, and for establishing professional and ethical standards for clinical genetics services in Canada. Recommendations include (1) clinical genome-wide sequencing is an appropriate approach in the diagnostic assessment of a patient for whom there is suspicion of a significant monogenic disease that is associated with a high degree of genetic heterogeneity, or where specific genetic tests have failed to provide a diagnosis; (2) until the benefits of reporting incidental findings are established, we do not endorse the intentional clinical analysis of disease-associated genes other than those linked to the primary indication; and (3) clinicians should provide genetic counselling and obtain informed consent prior to undertaking clinical genome-wide sequencing. Counselling should include discussion of the limitations of testing, likelihood and implications of diagnosis and incidental findings, and the potential need for further analysis to facilitate clinical interpretation, including studies performed in a research setting. These recommendations will be routinely re-evaluated as knowledge of diagnostic and clinical utility of clinical genome-wide sequencing improves. While the document was developed to direct practice in Canada, the applicability of the statement is broader and will be of interest to clinicians and health jurisdictions internationally. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Feed Safe: a multidisciplinary partnership approach results in a successful mobile application for breastfeeding mothers.

PubMed

White, Becky; White, James; Giglia, Roslyn; Tawia, Susan

2016-05-30

Issue addressed: Mobile applications are increasingly being used in health promotion initiatives. Although there is evidence that developing these mobile health applications in multidisciplinary teams is good practice, there is a gap in the literature with respect to evaluation of the process of this partnership model and how best to disseminate the application into the community. The aim of this paper is twofold, to describe the partnership model in which the Feed Safe application was developed and to investigate what worked in terms of dissemination. Methods: The process of working in partnership was measured using the VicHealth partnership analysis tool for health promotion. The dissemination strategy and reach of the application was measured using both automated analytics data and estimates of community-initiated promotion. Results: The combined average score from the partnership analysis tool was 138 out of a possible 175. A multipronged dissemination strategy led to good uptake of the application among Australian women. Conclusions: Multidisciplinary partnership models are important in the development of health promotion mobile applications. Recognising and utilising the skills of each partner organisation can help expand the reach of mobile health applications into the Australian population and aid in good uptake of health promotion resources. So what?: Developing mobile applications in multidisciplinary partnerships is good practice and can lead to wide community uptake of the health promotion resource.

Rare events modeling with support vector machine: Application to forecasting large-amplitude geomagnetic substorms and extreme events in financial markets.

NASA Astrophysics Data System (ADS)

Gavrishchaka, V. V.; Ganguli, S. B.

2001-12-01

Reliable forecasting of rare events in a complex dynamical system is a challenging problem that is important for many practical applications. Due to the nature of rare events, data set available for construction of the statistical and/or machine learning model is often very limited and incomplete. Therefore many widely used approaches including such robust algorithms as neural networks can easily become inadequate for rare events prediction. Moreover in many practical cases models with high-dimensional inputs are required. This limits applications of the existing rare event modeling techniques (e.g., extreme value theory) that focus on univariate cases. These approaches are not easily extended to multivariate cases. Support vector machine (SVM) is a machine learning system that can provide an optimal generalization using very limited and incomplete training data sets and can efficiently handle high-dimensional data. These features may allow to use SVM to model rare events in some applications. We have applied SVM-based system to the problem of large-amplitude substorm prediction and extreme event forecasting in stock and currency exchange markets. Encouraging preliminary results will be presented and other possible applications of the system will be discussed.

Biomimetic plasmonic color generated by the single-layer coaxial honeycomb nanostructure arrays

NASA Astrophysics Data System (ADS)

Zhao, Jiancun; Gao, Bo; Li, Haoyong; Yu, Xiaochang; Yang, Xiaoming; Yu, Yiting

2017-07-01

We proposed a periodic coaxial honeycomb nanostructure array patterned in a silver film to realize the plasmonic structural color, which was inspired from natural honeybee hives. The spectral characteristics of the structure with variant geometrical parameters are investigated by employing a finite-difference time-domain method, and the corresponding colors are thus derived by calculating XYZ tristimulus values corresponding with the transmission spectra. The study demonstrates that the suggested structure with only a single layer has high transmission, narrow full-width at half-maximum, and wide color tunability by changing geometrical parameters. Therefore, the plasmonic colors realized possess a high color brightness, saturation, as well as a wide color gamut. In addition, the strong polarization independence makes it more attractive for practical applications. These results indicate that the recommended color-generating plasmonic structure has various potential applications in highly integrated optoelectronic devices, such as color filters and high-definition displays.

Polarization independent subtractive color printing based on ultrathin hexagonal nanodisk-nanohole hybrid structure arrays.

PubMed

Zhao, Jiancun; Yu, Xiaochang; Yang, Xiaoming; Xiang, Quan; Duan, Huigao; Yu, Yiting

2017-09-18

Structural color printing based on plasmonic metasurfaces has been recognized as a promising alternative to the conventional dye colorants, though the color brightness and polarization tolerance are still a great challenge for practical applications. In this work, we report a novel plasmonic metasurface for subtractive color printing employing the ultrathin hexagonal nanodisk-nanohole hybrid structure arrays. Through both the experimental and numerical investigations, the subtractive color thus generated taking advantages of extraordinary low transmission (ELT) exhibits high brightness, polarization independence and wide color tunability by varying key geometrical parameters. In addition, other regular patterns including square, pentagonal and circular shapes are also surveyed, and reveal a high color brightness, wide gamut and polarization independence as well. These results indicate that the demonstrated plasmonic metasurface has various potential applications in high-definition displays, high-density optical data storage, imaging and filtering technologies.

Web GIS in practice VIII: HTML5 and the canvas element for interactive online mapping

PubMed Central

2010-01-01

HTML5 is being developed as the next major revision of HTML (Hypertext Markup Language), the core markup language of the World Wide Web. It aims at reducing the need for proprietary, plug-in-based rich Internet application (RIA) technologies such as Adobe Flash. The canvas element is part of HTML5 and is used to draw graphics using scripting (e.g., JavaScript). This paper introduces Cartagen, an open-source, vector-based, client-side framework for rendering plug-in-free, offline-capable, interactive maps in native HTML5 on a wide range of Web browsers and mobile phones. Cartagen was developed at MIT Media Lab's Design Ecology group. Potential applications of the technology as an enabler for participatory online mapping include mapping real-time air pollution, citizen reporting, and disaster response, among many other possibilities. PMID:20199681

Development of test methods for textile composites

NASA Technical Reports Server (NTRS)

Masters, John E.; Ifju, Peter G.; Fedro, Mark J.

1993-01-01

NASA's Advanced Composite Technology (ACT) Program was initiated in 1990 with the purpose of developing less costly composite aircraft structures. A number of innovative materials and processes were evaluated as a part of this effort. Chief among them are composite materials reinforced with textile preforms. These new forms of composite materials bring with them potential testing problems. Methods currently in practice were developed over the years for composite materials made from prepreg tape or simple 2-D woven fabrics. A wide variety of 2-D and 3-D braided, woven, stitched, and knit preforms were suggested for application in the ACT program. The applicability of existing test methods to the wide range of emerging materials bears investigation. The overriding concern is that the values measured are accurate representations of the true material response. The ultimate objective of this work is to establish a set of test methods to evaluate the textile composites developed for the ACT Program.

Evidence-Based Practice in Forensic Mental Health Nursing: A Critical Review.

PubMed

Byrt, Richard; Spencer-Stiles, Theresa A; Ismail, Ismail

2018-06-15

Literature searches of databases, particularly CINAHL, using key phrases were undertaken. Some authors argue that there is a lack of evidence in forensic mental health (FMH) nursing, with few randomized controlled trials and other methods providing definitive, generalizable evidence. However, literature searches revealed randomized controlled trials of relevance to FMH nursing, many qualitative studies by FMH nurses, and arguments for clinical experience and knowledge of service users, and the latter's views, as sources of evidence. Research findings can be applied to practice, both directly and indirectly. Examples are given of ways that evidence can be used to inform FMH nursing interventions related to therapeutic ward environments, including communication, therapeutic relationships, preventing retraumatization, and enabling physical health. The complex nature of "evidence" is considered in relation to risk assessment and management. FMH nursing can be based on a wide range of sources of evidence. The types of evidence used in practice depend on individual service users' needs and views. In evaluating evidence, it is necessary to be aware of its complex, diverse nature. A distinction can be made between definitive, widely generalizable research findings and evidence with limited generalizability, requiring FMH nurses' judgments about whether it is applicable to their own area of practice. Recommendations for related education and research are made.

Quality control of colonoscopy procedures: a prospective validated method for the evaluation of professional practices applicable to all endoscopic units.

PubMed

Coriat, R; Pommaret, E; Chryssostalis, A; Viennot, S; Gaudric, M; Brezault, C; Lamarque, D; Roche, H; Verdier, D; Parlier, D; Prat, F; Chaussade, S

2009-02-01

To produce valid information, an evaluation of professional practices has to assess the quality of all practices before, during and after the procedure under study. Several auditing techniques have been proposed for colonoscopy. The purpose of this work is to describe a straightforward original validated method for the prospective evaluation of professional practices in the field of colonoscopy applicable in all endoscopy units without increasing the staff work load. Pertinent quality-control criteria (14 items) were identified by the endoscopists at the Cochin Hospital and were compatible with: findings in the available literature; guidelines proposed by the Superior Health Authority; and application in any endoscopy unit. Prospective routine data were collected and the methodology validated by evaluating 50 colonoscopies every quarter for one year. The relevance of the criteria was assessed using data collected during four separate periods. The standard checklist was complete for 57% of the colonoscopy procedures. The colonoscopy procedure was appropriate according to national guidelines in 94% of cases. These observations were particularly noteworthy: the quality of the colonic preparation was insufficient for 9% of the procedures; complete colonoscopy was achieved for 93% of patients; and 0.38 adenomas and 0.045 carcinomas were identified per colonoscopy. This simple and reproducible method can be used for valid quality-control audits in all endoscopy units. In France, unit-wide application of this method enables endoscopists to validate 100 of the 250 points required for continuous medical training. This is a quality-control tool that can be applied annually, using a random month to evaluate any changes in routine practices.

Quality in the pharmaceutical industry - A literature review.

PubMed

Haleem, Reham M; Salem, Maissa Y; Fatahallah, Faten A; Abdelfattah, Laila E

2015-10-01

The aim of this study is to:a.Highlight the most important guidelines and practices of quality in the pharmaceutical industry.b.Organize such guidelines and practices to create a guide to pave the way for other researchers who would like to dig deeper into these guidelines and practices. A review was conducted of 102 publications; 56 publications were concerned with the pharmaceutical quality directly while 46 publications were concerned with the general quality practices. The content of those sources was analyzed and the following themes were identified:a.Research theme 1: Guidelines of the pharmaceutical quality.b.Research theme 2: General practices recently applied in the pharmaceutical industry. The following guidelines were identified and reviewed: WHO guidelines, FDA guidelines, EU guidelines and ICH guidelines in the research theme I. In research theme II; the following topics were identified and reviewed: quality risk management, quality by design, corrective actions and preventive actions, process capability analysis, Six Sigma, process analytical technology, lean manufacturing, total quality management, ISO series and HACCP. Upon reviewing the previously highlighted guidelines and the practices that are widely applied in the pharmaceutical industry, it was noticed that there is an abundant number of papers and articles that explain the general guidelines and practices but the literature lack those describing application; case studies of the pharmaceutical factories applying those guidelines and significance of those guidelines and practices. It is recommended that the literature would invest more in the area of application and significance of guidelines and practices. New case studies should be done to prove the feasibility of such practices.

Embryo transfer techniques: an American Society for Reproductive Medicine survey of current Society for Assisted Reproductive Technology practices.

PubMed

Toth, Thomas L; Lee, Malinda S; Bendikson, Kristin A; Reindollar, Richard H

2017-04-01

To better understand practice patterns and opportunities for standardization of ET. Cross-sectional survey. Not applicable. Not applicable. An anonymous 82-question survey was emailed to the medical directors of 286 Society for Assisted Reproductive Technology member IVF practices. A follow-up survey composed of three questions specific to ET technique was emailed to the same medical directors. Descriptive statistics of the results were compiled. The survey assessed policies, protocols, restrictions, and specifics pertinent to the technique of ET. There were 117 (41%) responses; 32% practice in academic settings and 68% in private practice. Responders were experienced clinicians, half of whom had performed <10 procedures during training. Ninety-eight percent of practices allowed all practitioners to perform ET; half did not follow a standardized ET technique. Multiple steps in the ET process were identified as "highly conserved;" others demonstrated discordance. ET technique is divided among [1] trial transfer followed immediately with ET (40%); [2] afterload transfer (30%); and [3] direct transfer without prior trial or afterload (27%). Embryos are discharged in the upper (66%) and middle thirds (29%) of the endometrial cavity and not closer than 1-1.5 cm from fundus (87%). Details of each step were reported and allowed the development of a "common" practice ET procedure. ET training and practices vary widely. Improved training and standardization based on outcomes data and best practices are warranted. A common practice procedure is suggested for validation by a systematic literature review. Copyright © 2017 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Heating Analysis in Constant-pressure Hydraulic System based on Energy Analysis

NASA Astrophysics Data System (ADS)

Wu, Chao; Xu, Cong; Mao, Xuyao; Li, Bin; Hu, Junhua; Liu, Yiou

2017-12-01

Hydraulic systems are widely used in industrial applications, but the problem of heating has become an important reason to restrict the promotion of hydraulic technology. The high temperature, will seriously affect the operation of the hydraulic system, even cause stuck and other serious failure. Based on the analysis of the heat damage of the hydraulic system, this paper gives the reasons for this problem, and it is showed by the application that the energy analysis can accurately locate the main reasons for the heating of the hydraulic system, which can give strong practical guidance.

Wireless sensor network for wide-area high-mobility applications

NASA Astrophysics Data System (ADS)

del Castillo, Ignacio; Esper-Chaín, Roberto; Tobajas, Félix; de Armas, Valentín.

2013-05-01

In recent years, IEEE 802.15.4-based Wireless Sensor Networks (WSN) have experienced significant growth, mainly motivated by the standard features, such as small size oriented devices, low power consumption nodes, wireless communication links, and sensing and data processing capabilities. In this paper, the development, implementation and deployment of a novel fully compatible IEEE 802.15.4-based WSN architecture for applications operating over extended geographic regions with high node mobility support, is described. In addition, a practical system implementation of the proposed WSN architecture is presented and described for experimental validation and characterization purposes.

Cold plasma decontamination using flexible jet arrays

NASA Astrophysics Data System (ADS)

Konesky, Gregory

2010-04-01

Arrays of atmospheric discharge cold plasma jets have been used to decontaminate surfaces of a wide range of microorganisms quickly, yet not damage that surface. Its effectiveness in decomposing simulated chemical warfare agents has also been demonstrated, and may also find use in assisting in the cleanup of radiological weapons. Large area jet arrays, with short dwell times, are necessary for practical applications. Realistic situations will also require jet arrays that are flexible to adapt to contoured or irregular surfaces. Various large area jet array prototypes, both planar and flexible, are described, as is the application to atmospheric decontamination.

Practical applications of surface analytic tools in tribology

NASA Technical Reports Server (NTRS)

Ferrante, J.

1980-01-01

A brief description of many of the widely used tools is presented. Of this list, those which have the highest applicability for giving elemental and/or compound analysis for problems of interest in tribology along with being truly surface sensitive (that is less than 10 atomic layers) are presented. The latter group is critiqued in detail in terms of strengths and weaknesses. Emphasis is placed on post facto analysis of experiments performed under real conditions (e.g., in air with lubricants). It is further indicated that such equipment could be used for screening and quality control.

Your Higgs number—how fundamental physics is connected to technology and societal revolutions

NASA Astrophysics Data System (ADS)

Allen, Roland E.; Lidström, Suzy

2015-02-01

Fundamental physics, as exemplified by the recently discovered Higgs boson, often appears to be completely disconnected from practical applications and ordinary human life. But this is not really the case, because science, technology, and human affairs are profoundly integrated in ways that are not immediately obvious. We illustrate this by defining a ‘Higgs number’ through overlapping activities. Following three different paths, which end respectively in applications of the World Wide Web, digital photography, and all modern electronic devices, we find that most people have a Higgs number of no greater than 3.

Phenomenally High Transduction Air/gas Transducers for Practical Non-Contact Ultrasonic Applications

NASA Astrophysics Data System (ADS)

Bhardwaj, Mahesh C.

2009-03-01

Based on novel acoustic impedance matching layers and high coupling piezoelectric materials this paper describes exceptionally high air/gas transduction ultrasonic transducers. By providing applications oriented performance of these transducers we also usher in the era of much desired Non-Contact Ultrasound (NCU) testing and analysis of a wide range of materials including early stage formation of materials such as uncured composite prepregs, green ceramics and powder metals, plastics, elastomers, porous, hygroscopic, chemically bonded and other materials. Besides quality control, ultimately NCU offers timely opportunities for cost-effective materials production, energy savings, and environment protection.

Adoption of telemedicine in Scottish remote and rural general practices: a qualitative study.

PubMed

King, Gerry; Richards, Helen; Godden, David

2007-01-01

We conducted a qualitative interview study to explore the factors that have facilitated and prevented the adoption of telemedicine in general practice in remote and rural Scotland. Face-to-face interviews were carried out with general practitioners (GPs) and practice nurses in 26 of Scotland's most remote practices and five of the seven most rural health boards. The interview study found that GPs were more positive about the use of computers and telemedicine than nurses. Although electronic access to simple data, such as laboratory results, had become widely accepted, most respondents had very little experience of more sophisticated telemedicine applications, such as videoconferencing. There was widespread scepticism about the potential usefulness of clinical applications of telemedicine, although it was perceived to have potential benefit in facilitating access to educational resources. A number of barriers to the adoption of telemedicine were reported, including concerns that videoconferencing could diminish the quality of communication in educational and clinical settings, and that telemedicine would not fit easily with the organizational routines of the practices. Policy-makers should prioritize strategies to develop educational programmes, as these are more likely to succeed than clinical initiatives. It may then follow that clinicians will see opportunities for use in their clinical work.

Biology and applications of human minisatellite loci.

PubMed

Armour, J A; Jeffreys, A J

1992-12-01

Highly repetitive minisatellites' include the most variable human loci described to date. They have proved invaluable in a wide variety of genetic analyses, and despite some controversies surrounding their practical implementation, have been extensively adopted in civil and forensic casework. Molecular analysis of internal allelic structure has provided detailed insights into the repeat-unit turnover mechanisms operating in germline mutations, which are ultimately responsible for the extreme variability seen at these loci.

The retrospective chart review: important methodological considerations.

PubMed

Vassar, Matt; Holzmann, Matthew

2013-01-01

In this paper, we review and discuss ten common methodological mistakes found in retrospective chart reviews. The retrospective chart review is a widely applicable research methodology that can be used by healthcare disciplines as a means to direct subsequent prospective investigations. In many cases in this review, we have also provided suggestions or accessible resources that researchers can apply as a "best practices" guide when planning, conducting, or reviewing this investigative method.

Synthetic procedure for N-Fmoc amino acyl-N-sulfanylethylaniline linker as crypto-peptide thioester precursor with application to native chemical ligation.

PubMed

Sakamoto, Ken; Sato, Kohei; Shigenaga, Akira; Tsuji, Kohei; Tsuda, Shugo; Hibino, Hajime; Nishiuchi, Yuji; Otaka, Akira

2012-08-17

N-sulfanylethylanilide (SEAlide) peptides 1, obtainable using Fmoc-based solid-phase peptide synthesis (Fmoc SPPS), function as crypto-thioesters in native chemical ligation (NCL), yielding a wide variety of peptides/proteins. Their acylating potential with N-terminal cysteinyl peptides 2 can be tuned by the presence or absence of phosphate salts, leading to one-pot/multifragment ligation, operating under kinetically controlled conditions. SEAlide peptides have already been shown to be promising for use in protein synthesis; however, a widely applicable method for the synthesis of N-Fmoc amino acyl-N-sulfanylethylaniline linkers 4, required for the preparation of SEAlide peptides, is unavailable. The present study addresses the development of efficient condensation protocols of 20 naturally occurring amino acid derivatives to the N-sulfanylethylaniline linker 5. N-Fmoc amino acyl aniline linkers 4 of practical use in NCL chemistry, except in the case of the proline- or aspartic acid-containing linker, were successfully synthesized by coupling of POCl(3)- or SOCl(2)-activated Fmoc amino acid derivatives with sodium anilide species 6, without accompanying racemization and loss of side-chain protection. Furthermore, SEAlide peptides 7 possessing various C-terminal amino acids (Gly, His, Phe, Ala, Asn, Ser, Glu, and Val) were shown to be of practical use in NCL chemistry.

Detectors for Tomorrow's Instruments

NASA Technical Reports Server (NTRS)

Moseley, Harvey

2009-01-01

Cryogenically cooled superconducting detectors have become essential tools for a wide range of measurement applications, ranging from quantum limited heterodyne detection in the millimeter range to direct searches for dark matter with superconducting phonon detectors operating at 20 mK. Superconducting detectors have several fundamental and practical advantages which have resulted in their rapid adoption by experimenters. Their excellent performance arises in part from reductions in noise resulting from their low operating temperatures, but unique superconducting properties provide a wide range of mechanisms for detection. For example, the steep dependence of resistance with temperature on the superconductor/normal transition provides a sensitive thermometer for calorimetric and bolometric applications. Parametric changes in the properties of superconducting resonators provides a mechanism for high sensitivity detection of submillimeter photons. From a practical point of view, the use of superconducting detectors has grown rapidly because many of these devices couple well to SQUID amplifiers, which are easily integrated with the detectors. These SQUID-based amplifiers and multiplexers have matured with the detectors; they are convenient to use, and have excellent noise performance. The first generation of fully integrated large scale superconducting detection systems are now being deployed. I will discuss the prospects for a new generation of instruments designed to take full advantage of the revolution in detector technology.

3D printing: making things at the library.

PubMed

Hoy, Matthew B

2013-01-01

3D printers are a new technology that creates physical objects from digital files. Uses for these printers include printing models, parts, and toys. 3D printers are also being developed for medical applications, including printed bone, skin, and even complete organs. Although medical printing lags behind other uses for 3D printing, it has the potential to radically change the practice of medicine over the next decade. Falling costs for hardware have made 3D printers an inexpensive technology that libraries can offer their patrons. Medical librarians will want to be familiar with this technology, as it is sure to have wide-reaching effects on the practice of medicine.

Principles of Celestial Navigation: An Online Resource for Introducing Practical Astronomy to the Public

NASA Astrophysics Data System (ADS)

Urban, Sean E.

2015-08-01

Astronomy is often called a "gateway" science because it inspires appreciation and awe among children and non-scientists. Applied astronomy, with practical, real-world applications, can entice even the most utilitarian people to take notice and learn about the subject. Traditional celestial navigation is an astronomy topic that captures the attention of the public. The U.S. Naval Observatory has led the development of a publicly available online celestial navigation educational module titled, "Principles of Celestial Navigation". It can be used world-wide to introduce people to astronomy. This poster describes some of the aspects of this teaching module.

The importance of the past in public health

PubMed Central

Scally, G.; Womack, J.

2004-01-01

Study objective: To explore the role of history in public health and its relevance to current practice and professional development. Design: An analysis of the issues surrounding the poor attention paid to the history of public health by its current practitioners. Setting: The paper is written from the perspective of practitioners in the UK but has wide applicability. Main results: The paper makes the case that the current neglect of public health history is to the detriment of public health practice. Conclusions: There is a strong case for more attention to be paid to public health history in professional formation, development, and communication. PMID:15310800

The Role of Lean Process Improvement in Implementation of Evidence-Based Practices in Behavioral Health Care.

PubMed

Steinfeld, Bradley; Scott, Jennifer; Vilander, Gavin; Marx, Larry; Quirk, Michael; Lindberg, Julie; Koerner, Kelly

2015-10-01

To effectively implement evidence-based practices (EBP) in behavioral health care, an organization needs to have operating structures and processes that can address core EBP implementation factors and stages. Lean, a widely used quality improvement process, can potentially address the factors crucial to successful implementation of EBP. This article provides an overview of Lean and the relationship between Lean process improvement steps, and EBP implementation models. Examples of how Lean process improvement methodologies can be used to help plan and carry out implementation of EBP in mental health delivery systems are presented along with limitations and recommendations for future research and clinical application.

Health and Wellness Policy Ethics

PubMed Central

Cavico, Frank J.; Mujtaba, Bahaudin G.

2013-01-01

This perspective is an ethical brief overview and examination of “wellness” policies in the modern workplace using practical examples and a general application of utilitarianism. Many employers are implementing policies that provide incentives to employees who lead a “healthy” lifestyle. The authors address how these policies could adversely affect “non-healthy” employees. There are a wide variety of ethical issues that impact wellness policies and practices in the workplace. The authors conclude that wellness programs can be ethical, while also providing a general reflective analysis of healthcare challenges in order to reflect on the externalities associated with such policies in the workplace. PMID:24596847

Review of Current Applications of Immunohistochemistry in Pediatric Nonneoplastic Gastrointestinal, Hepatobiliary, and Pancreatic Lesions

PubMed Central

de Nanassy, Joseph; El Demellawy, Dina

2017-01-01

Immunohistochemical (IHC) stains are widely used by pathologists for a variety of considerations in the diagnostic workup of pediatric nonneoplastic lesions in gastrointestinal (GI), hepatic, biliary, and pancreatic lesions. The pathologic changes cover a wide range and types of presentations, including inflammatory (bacterial and viral), metaplastic, posttransplant lymphoproliferative, autoimmune, metabolic, degenerative, developmental, and genetic conditions, among others. The everyday practical value of IHC stains covers primary identification, confirmation, differential, and/or exclusionary roles in the hands and eyes and minds of the practitioners. This article is intended to review and discuss the currently available IHC stains for a variety of pediatric GI, hepatobiliary, and pancreatic lesions as encountered in the day-to-day practice of pathologists and clinicians. It reflects the most recent methods and types of IHC stains with the stated aim of helping to provide a quick reference for diagnostic considerations and thereby facilitate the workup of a broad range of GI and related conditions in a pediatric population. The tables provide a handy reference on a wide range of IHC stains for commonly encountered lesions covering a variety of pediatric GI, hepatobiliary, and pancreatic conditions that are amenable to light microscopic diagnostic interpretation. PMID:28469406

Supporting Regularized Logistic Regression Privately and Efficiently.

PubMed

Li, Wenfa; Liu, Hongzhe; Yang, Peng; Xie, Wei

2016-01-01

As one of the most popular statistical and machine learning models, logistic regression with regularization has found wide adoption in biomedicine, social sciences, information technology, and so on. These domains often involve data of human subjects that are contingent upon strict privacy regulations. Concerns over data privacy make it increasingly difficult to coordinate and conduct large-scale collaborative studies, which typically rely on cross-institution data sharing and joint analysis. Our work here focuses on safeguarding regularized logistic regression, a widely-used statistical model while at the same time has not been investigated from a data security and privacy perspective. We consider a common use scenario of multi-institution collaborative studies, such as in the form of research consortia or networks as widely seen in genetics, epidemiology, social sciences, etc. To make our privacy-enhancing solution practical, we demonstrate a non-conventional and computationally efficient method leveraging distributing computing and strong cryptography to provide comprehensive protection over individual-level and summary data. Extensive empirical evaluations on several studies validate the privacy guarantee, efficiency and scalability of our proposal. We also discuss the practical implications of our solution for large-scale studies and applications from various disciplines, including genetic and biomedical studies, smart grid, network analysis, etc.

Supporting Regularized Logistic Regression Privately and Efficiently

PubMed Central

Li, Wenfa; Liu, Hongzhe; Yang, Peng; Xie, Wei

2016-01-01

As one of the most popular statistical and machine learning models, logistic regression with regularization has found wide adoption in biomedicine, social sciences, information technology, and so on. These domains often involve data of human subjects that are contingent upon strict privacy regulations. Concerns over data privacy make it increasingly difficult to coordinate and conduct large-scale collaborative studies, which typically rely on cross-institution data sharing and joint analysis. Our work here focuses on safeguarding regularized logistic regression, a widely-used statistical model while at the same time has not been investigated from a data security and privacy perspective. We consider a common use scenario of multi-institution collaborative studies, such as in the form of research consortia or networks as widely seen in genetics, epidemiology, social sciences, etc. To make our privacy-enhancing solution practical, we demonstrate a non-conventional and computationally efficient method leveraging distributing computing and strong cryptography to provide comprehensive protection over individual-level and summary data. Extensive empirical evaluations on several studies validate the privacy guarantee, efficiency and scalability of our proposal. We also discuss the practical implications of our solution for large-scale studies and applications from various disciplines, including genetic and biomedical studies, smart grid, network analysis, etc. PMID:27271738

[Study on remote sensing of methane leakage using a tunable diode laser].

PubMed

Fan, Hong; Gao, Xiao-Ming; Bao, Jian; Wang, Xia; Huang, Teng; Huang, Wei; Cao, Zhen-Song; Zhang, Wei-Jun

2006-08-01

The leak of natural gas is not only an economic loss, but also the fountain of danger. Conventional detection techniques of natural gas pipe leak have low efficiency and slow respond time, therefore, it is difficult for them to suit practice application. Optical sensors based on NIR tunable diode laser absorption spectroscopy were widely used because of high sensitivity, small volume and less maintenance. In the present paper, a portable remote sensor of natural gas pipeline leak was reported. The sensor used a ratio of second to first harmonic signals as calibration method, and the results show a good consistency between the concentrations and the ratios of second to first harmonic signals. The effect of different topographic scattering targets on the ratio detection was measured and analyzed. The results show that the ratio of second to first harmonic signals can be used in practical application.

Periodontal microsurgery: Reaching new heights of precision

PubMed Central

Yadav, Vikender Singh; Salaria, Sanjeev Kumar; Bhatia, Anu; Yadav, Renu

2018-01-01

The use of magnification to perform various procedures in medical and dental field, particularly endodontics has long been recognized. Unfortunately, its application in periodontics is not widely popularized. The objective of this article is to emphasize the application of microsurgical principles in various periodontal surgical procedures and to reinforce the incorporation of microscope into periodontal practice. The most recent periodontal journals were reviewed and a search of databases such as PubMed or Medline and Google Scholar was conducted for relevant material from published literature up to 2017. Medical Subject Headings words looked for were “periodontal microsurgery” and “minimally invasive periodontal surgery.” The available literature, specifically to periodontal surgical procedures was analyzed and compiled. The analysis indicates that incorporation of magnification in periodontal practice is associated with improved visual acuity, ergonomic benefits, decreased patient morbidity, rapid healing, and enhanced patient acceptance. PMID:29568165

Polymerase Chain Reaction/Rapid Methods Are Gaining a Foothold in Developing Countries.

PubMed

Ragheb, Suzan Mohammed; Jimenez, Luis

Detection of microbial contamination in pharmaceutical raw materials and finished products is a critical factor to guarantee their safety, stability, and potency. Rapid microbiological methods-such as polymerase chain reaction-have been widely applied to clinical and food quality control analysis. However, polymerase chain reaction applications to pharmaceutical quality control have been rather slow and sporadic. Successful implementation of these methods in pharmaceutical companies in developing countries requires important considerations to provide sensitive and robust assays that will comply with good manufacturing practices. In recent years several publications have encouraged the application of molecular techniques in the microbiological assessment of pharmaceuticals. One of these techniques is polymerase chain reaction (PCR). The successful application of PCR in the pharmaceutical industry in developing countries is governed by considerable factors and requirements. These factors include the setting up of a PCR laboratory and the choice of appropriate equipment and reagents. In addition, the presence of well-trained analysts and establishment of quality control and quality assurance programs are important requirements. The pharmaceutical firms should take into account these factors to allow better chances for regulatory acceptance and wide application of this technique. © PDA, Inc. 2014.

Military applications and examples of near-surface seismic surface wave methods (Invited)

NASA Astrophysics Data System (ADS)

sloan, S.; Stevens, R.

2013-12-01

Although not always widely known or publicized, the military uses a variety of geophysical methods for a wide range of applications--some that are already common practice in the industry while others are truly novel. Some of those applications include unexploded ordnance detection, general site characterization, anomaly detection, countering improvised explosive devices (IEDs), and security monitoring, to name a few. Techniques used may include, but are not limited to, ground penetrating radar, seismic, electrical, gravity, and electromagnetic methods. Seismic methods employed include surface wave analysis, refraction tomography, and high-resolution reflection methods. Although the military employs geophysical methods, that does not necessarily mean that those methods enable or support combat operations--often times they are being used for humanitarian applications within the military's area of operations to support local populations. The work presented here will focus on the applied use of seismic surface wave methods, including multichannel analysis of surface waves (MASW) and backscattered surface waves, often in conjunction with other methods such as refraction tomography or body-wave diffraction analysis. Multiple field examples will be shown, including explosives testing, tunnel detection, pre-construction site characterization, and cavity detection.

Saccharomyces boulardii: a summary of the evidence for gastroenterology clinical practice in adults and children.

PubMed

Berni Canani, R; Cucchiara, S; Cuomo, R; Pace, F; Papale, F

2011-07-01

Probiotics are viable, nonpathogenic microorganisms (bacteria or yeast) which when administered in adequate amounts, confer a health benefit on the host. At this time, Saccharomyces boulardii is the only yeast commonly used in clinical practice. Literature on this probiotic is wide and even more data become available each year. Thus, it could be problematic for a physician summarize all the best information deriving from basic research and clinical studies. With the aim to help physicians in the use of Saccharomyces boulardii, this paper focuses on the available evidences for its efficacy and safety in different diseases in adult and pediatric patients in order to provide a practical guidance for gastroenterology clinical practice. Indications and dosage for several gastrointestinal diseases for a correct use of this probiotic are provided, and recent insights on its mechanisms of action and possible future clinical application are also discussed.

Neuroimaging in aphasia treatment research: Consensus and practical guidelines for data analysis

PubMed Central

Meinzer, Marcus; Beeson, Pélagie M.; Cappa, Stefano; Crinion, Jenny; Kiran, Swathi; Saur, Dorothee; Parrish, Todd; Crosson, Bruce; Thompson, Cynthia K.

2012-01-01

Functional magnetic resonance imaging is the most widely used imaging technique to study treatment-induced recovery in post-stroke aphasia. The longitudinal design of such studies adds to the challenges researchers face when studying patient populations with brain damage in cross-sectional settings. The present review focuses on issues specifically relevant to neuroimaging data analysis in aphasia treatment research identified in discussions among international researchers at the Neuroimaging in Aphasia Treatment Research Workshop held at Northwestern University (Evanston, Illinois, USA). In particular, we aim to provide the reader with a critical review of unique problems related to the pre-processing, statistical modeling and interpretation of such data sets. Despite the fact that data analysis procedures critically depend on specific design features of a given study, we aim to discuss and communicate a basic set of practical guidelines that should be applicable to a wide range of studies and useful as a reference for researchers pursuing this line of research. PMID:22387474

Recent practices on wastewater reuse in Turkey.

PubMed

Tanik, A; Ekdal, A; Germirli Babuna, F; Orhon, D

2005-01-01

Reuse of wastewater for irrigational purposes in agriculture has been a widely applied practice all around the world compared to such applications in industries. In most of the developing countries, high costs of wastewater treatment stimulate the direct reuse of raw or partly treated effluent in irrigation despite the socio-cultural objections in some countries regarding religious rituals towards consuming wastewater. In Turkey, reuse applications in agriculture have been in use by indirect application by means of withdrawing water from the downstream end of treatment plants. Such practices affected the deterioration of surface water resources due to the lack of water quality monitoring and control. However, more conscious and planned reuse activities in agriculture have recently started by the operation of urban wastewater treatment plants. Turkey does not face any severe water scarcity problems for the time being, but as the water resources show the signs of water quality deterioration it seems to be one of the priority issues in the near future. The industrial reuse activities are only at the research stage especially in industries consuming high amounts of water. In-plant control implementation is the preferred effort of minimizing water consumption in such industries. The current reuse activities are outlined in the article forming an example from a developing country.

Practical comparison of distributed ledger technologies for IoT

NASA Astrophysics Data System (ADS)

Red, Val A.

2017-05-01

Existing distributed ledger implementations - specifically, several blockchain implementations - embody a cacophony of divergent capabilities augmenting innovations of cryptographic hashes, consensus mechanisms, and asymmetric cryptography in a wide variety of applications. Whether specifically designed for cryptocurrency or otherwise, several distributed ledgers rely upon modular mechanisms such as consensus or smart contracts. These components, however, can vary substantially among implementations; differences involving proof-of-work, practical byzantine fault tolerance, and other consensus approaches exemplify distinct distributed ledger variations. Such divergence results in unique combinations of modules, performance, latency, and fault tolerance. As implementations continue to develop rapidly due to the emerging nature of blockchain technologies, this paper encapsulates a snapshot of sensor and internet of things (IoT) specific implementations of blockchain as of the end of 2016. Several technical risks and divergent approaches preclude standardization of a blockchain for sensors and IoT in the foreseeable future; such issues will be assessed alongside the practicality of IoT applications among Hyperledger, Iota, and Ethereum distributed ledger implementations suggested for IoT. This paper contributes a comparison of existing distributed ledger implementations intended for practical sensor and IoT utilization. A baseline for characterizing distributed ledger implementations in the context of IoT and sensors is proposed. Technical approaches and performance are compared considering IoT size, weight, and power limitations. Consensus and smart contracts, if applied, are also analyzed for the respective implementations' practicality and security. Overall, the maturity of distributed ledgers with respect to sensor and IoT applicability will be analyzed for enterprise interoperability.

Review of intelligent video surveillance with single camera

NASA Astrophysics Data System (ADS)

Liu, Ying; Fan, Jiu-lun; Wang, DianWei

2012-01-01

Intelligent video surveillance has found a wide range of applications in public security. This paper describes the state-of- the-art techniques in video surveillance system with single camera. This can serve as a starting point for building practical video surveillance systems in developing regions, leveraging existing ubiquitous infrastructure. In addition, this paper discusses the gap between existing technologies and the requirements in real-world scenario, and proposes potential solutions to reduce this gap.

Jungle Computing: Distributed Supercomputing Beyond Clusters, Grids, and Clouds

NASA Astrophysics Data System (ADS)

Seinstra, Frank J.; Maassen, Jason; van Nieuwpoort, Rob V.; Drost, Niels; van Kessel, Timo; van Werkhoven, Ben; Urbani, Jacopo; Jacobs, Ceriel; Kielmann, Thilo; Bal, Henri E.

In recent years, the application of high-performance and distributed computing in scientific practice has become increasingly wide spread. Among the most widely available platforms to scientists are clusters, grids, and cloud systems. Such infrastructures currently are undergoing revolutionary change due to the integration of many-core technologies, providing orders-of-magnitude speed improvements for selected compute kernels. With high-performance and distributed computing systems thus becoming more heterogeneous and hierarchical, programming complexity is vastly increased. Further complexities arise because urgent desire for scalability and issues including data distribution, software heterogeneity, and ad hoc hardware availability commonly force scientists into simultaneous use of multiple platforms (e.g., clusters, grids, and clouds used concurrently). A true computing jungle.

Statistical methods to detect novel genetic variants using publicly available GWAS summary data.

PubMed

Guo, Bin; Wu, Baolin

2018-03-01

We propose statistical methods to detect novel genetic variants using only genome-wide association studies (GWAS) summary data without access to raw genotype and phenotype data. With more and more summary data being posted for public access in the post GWAS era, the proposed methods are practically very useful to identify additional interesting genetic variants and shed lights on the underlying disease mechanism. We illustrate the utility of our proposed methods with application to GWAS meta-analysis results of fasting glucose from the international MAGIC consortium. We found several novel genome-wide significant loci that are worth further study. Copyright © 2018 Elsevier Ltd. All rights reserved.

A systematic review of ecological attributes that confer resilience to climate change in environmental restoration

PubMed Central

Timpane-Padgham, Britta L.

2017-01-01

Ecological restoration is widely practiced as a means of rehabilitating ecosystems and habitats that have been degraded or impaired through human use or other causes. Restoration practices now are confronted by climate change, which has the potential to influence long-term restoration outcomes. Concepts and attributes from the resilience literature can help improve restoration and monitoring efforts under changing climate conditions. We systematically examined the published literature on ecological resilience to identify biological, chemical, and physical attributes that confer resilience to climate change. We identified 45 attributes explicitly related to climate change and classified them as individual- (9), population- (6), community- (7), ecosystem- (7), or process-level attributes (16). Individual studies defined resilience as resistance to change or recovery from disturbance, and only a few studies explicitly included both concepts in their definition of resilience. We found that individual and population attributes generally are suited to species- or habitat-specific restoration actions and applicable at the population scale. Community attributes are better suited to habitat-specific restoration at the site scale, or system-wide restoration at the ecosystem scale. Ecosystem and process attributes vary considerably in their type and applicability. We summarize these relationships in a decision support table and provide three example applications to illustrate how these classifications can be used to prioritize climate change resilience attributes for specific restoration actions. We suggest that (1) including resilience as an explicit planning objective could increase the success of restoration projects, (2) considering the ecological context and focal scale of a restoration action is essential in choosing appropriate resilience attributes, and (3) certain ecological attributes, such as diversity and connectivity, are more commonly considered to confer resilience because they apply to a wide variety of species and ecosystems. We propose that identifying sources of ecological resilience is a critical step in restoring ecosystems in a changing climate. PMID:28301560

A systematic review of ecological attributes that confer resilience to climate change in environmental restoration.

PubMed

Timpane-Padgham, Britta L; Beechie, Tim; Klinger, Terrie

2017-01-01

Ecological restoration is widely practiced as a means of rehabilitating ecosystems and habitats that have been degraded or impaired through human use or other causes. Restoration practices now are confronted by climate change, which has the potential to influence long-term restoration outcomes. Concepts and attributes from the resilience literature can help improve restoration and monitoring efforts under changing climate conditions. We systematically examined the published literature on ecological resilience to identify biological, chemical, and physical attributes that confer resilience to climate change. We identified 45 attributes explicitly related to climate change and classified them as individual- (9), population- (6), community- (7), ecosystem- (7), or process-level attributes (16). Individual studies defined resilience as resistance to change or recovery from disturbance, and only a few studies explicitly included both concepts in their definition of resilience. We found that individual and population attributes generally are suited to species- or habitat-specific restoration actions and applicable at the population scale. Community attributes are better suited to habitat-specific restoration at the site scale, or system-wide restoration at the ecosystem scale. Ecosystem and process attributes vary considerably in their type and applicability. We summarize these relationships in a decision support table and provide three example applications to illustrate how these classifications can be used to prioritize climate change resilience attributes for specific restoration actions. We suggest that (1) including resilience as an explicit planning objective could increase the success of restoration projects, (2) considering the ecological context and focal scale of a restoration action is essential in choosing appropriate resilience attributes, and (3) certain ecological attributes, such as diversity and connectivity, are more commonly considered to confer resilience because they apply to a wide variety of species and ecosystems. We propose that identifying sources of ecological resilience is a critical step in restoring ecosystems in a changing climate.

Mobile Technology for the Practice of Pathology.

PubMed

Hartman, Douglas J

2016-03-01

Recently, several technological advances have been introduced to mobile phones leading some people to refer to them as "smartphones." These changes have led to widespread consumer adoption. A similar adoption has occurred within the medical field and this revolution is changing the practice of medicine, including pathology. Several mobile applications have been published for dermatology, orthopedics, ophthalmology, neurosurgery, and clinical pathology. The applications are wide ranging, including mobile technology to increase patient engagement, self-monitoring by patients, clinical algorithm calculation, facilitation between experts to resource-poor environments. These advances have been received with mixed reviews. For anatomic pathology, mobile technology applications can be broken into 4 broad categories: (a) educational uses, (b) microscope with mobile phone, (c) mobile phone as microscope/acquisition device, and (d) miscellaneous. Using a mobile phone as an acquisition device paired with a microscope seems to be the most interesting current application because of the need for expert consultation with resource-poor environments. However, several emerging uses for mobile technology may become more prominent as the technology matures including image analysis, alternative light sources, and increased opportunities for clinician and patient engagement. The flexibility represented by mobile technology represents a burgeoning field in pathology informatics.

Improvement in the yield and quality of kalmegh (Andrographis paniculata Nees) under the sustainable production system.

PubMed

Verma, Rajesh Kumar; Verma, Sanjeet K; Pankaj, Umesh; Gupta, Anand K; Khan, Khushboo; Shankar, Karuna

2015-02-01

Andrographis paniculata Nees is an annual erect herb with wide medicinal and pharmacological applications due to the presence of andrographolide and other active chemical constituents. The large-scale cultivation of the kalmegh is not in practice. The aim of this study was to establish sustainable production systems of A. paniculata cv CIM-Megha with the application of different bioinoculants and chemical fertilisers. A. paniculata herb and andrographolide yield in the dried leaves was found to be highest (218% and 61.3%, respectively) in treatment T3 (NPK+Bacillus sp.) compared with T1 (control). The soil organic carbon, soil microbial respiration, soil enzymes activity and available nutrients improved significantly with combined application of bioinoculants and chemical fertilisers.

Improved resource use decisions and actions through remote sensing

NASA Technical Reports Server (NTRS)

Hill-Rowley, R.; Boylan, M.; Enslin, W.; Vlasin, R. D.

1975-01-01

Operational uses of remote sensing for improving management decisions and actions concerning resource uses are considered in terms of first generation, or direct-action; and second generation or indirect, delayed-action applications. From among applications completed during 1974-75, seven case studies are offered in illustration of the many contrasts which can be drawn between first and second generation application studies. These include: (1) multi-agency river basin planning; (2) corridor assessment and route location for highway location together with improvement of county-level planning decisions; (3) improving timber management practices; (4) enforcement of new state statutes; (5) county-wide open space preservation; (6) land value reappraisal relative to property tax equalization; and (7) optimizing agri-business processing plant locations.

Chemistry and physics of a single atomic layer: strategies and challenges for functionalization of graphene and graphene-based materials.

PubMed

Yan, Liang; Zheng, Yue Bing; Zhao, Feng; Li, Shoujian; Gao, Xingfa; Xu, Bingqian; Weiss, Paul S; Zhao, Yuliang

2012-01-07

Graphene has attracted great interest for its superior physical, chemical, mechanical, and electrical properties that enable a wide range of applications from electronics to nanoelectromechanical systems. Functionalization is among the significant vectors that drive graphene towards technological applications. While the physical properties of graphene have been at the center of attention, we still lack the knowledge framework for targeted graphene functionalization. In this critical review, we describe some of the important chemical and physical processes for graphene functionalization. We also identify six major challenges in graphene research and give perspectives and practical strategies for both fundamental studies and applications of graphene (315 references). This journal is © The Royal Society of Chemistry 2012

Printed Carbon Nanotube Electronics and Sensor Systems.

PubMed

Chen, Kevin; Gao, Wei; Emaminejad, Sam; Kiriya, Daisuke; Ota, Hiroki; Nyein, Hnin Yin Yin; Takei, Kuniharu; Javey, Ali

2016-06-01

Printing technologies offer large-area, high-throughput production capabilities for electronics and sensors on mechanically flexible substrates that can conformally cover different surfaces. These capabilities enable a wide range of new applications such as low-cost disposable electronics for health monitoring and wearables, extremely large format electronic displays, interactive wallpapers, and sensing arrays. Solution-processed carbon nanotubes have been shown to be a promising candidate for such printing processes, offering stable devices with high performance. Here, recent progress made in printed carbon nanotube electronics is discussed in terms of materials, processing, devices, and applications. Research challenges and opportunities moving forward from processing and system-level integration points of view are also discussed for enabling practical applications. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Using Publication Metrics to Highlight Academic Productivity and Research Impact

PubMed Central

Carpenter, Christopher R.; Cone, David C.; Sarli, Cathy C.

2016-01-01

This article provides a broad overview of widely available measures of academic productivity and impact using publication data and highlights uses of these metrics for various purposes. Metrics based on publication data include measures such as number of publications, number of citations, the journal impact factor score, and the h-index, as well as emerging metrics based on document-level metrics. Publication metrics can be used for a variety of purposes for tenure and promotion, grant applications and renewal reports, benchmarking, recruiting efforts, and administrative purposes for departmental or university performance reports. The authors also highlight practical applications of measuring and reporting academic productivity and impact to emphasize and promote individual investigators, grant applications, or department output. PMID:25308141

Physical forms of MIPs.

PubMed

Biffis, Andrea; Dvorakova, Gita; Falcimaigne-Cordin, Aude

2012-01-01

The current state of the art in the development of methodologies for the preparation of MIPs in predetermined physical forms is critically reviewed, with particular attention being paid to the forms most widely employed in practical applications, such as spherical beads in the micro- to nanometer range, microgels, monoliths, membranes. Although applications of the various MIP physical forms are mentioned, the focus of the paper is mainly on the description of the various preparative methods. The aim is to provide the reader with an overview of the latest achievements in the field, as well as with a mean for critically evaluating the various proposed methodologies towards an envisaged application. The review covers the literature up to early 2010, with special emphasis on the developments of the last 10 years.

Quality in the pharmaceutical industry – A literature review

PubMed Central

Haleem, Reham M.; Salem, Maissa Y.; Fatahallah, Faten A.; Abdelfattah, Laila E.

2013-01-01

Objectives The aim of this study is to:a.Highlight the most important guidelines and practices of quality in the pharmaceutical industry.b.Organize such guidelines and practices to create a guide to pave the way for other researchers who would like to dig deeper into these guidelines and practices. Design A review was conducted of 102 publications; 56 publications were concerned with the pharmaceutical quality directly while 46 publications were concerned with the general quality practices. The content of those sources was analyzed and the following themes were identified:a.Research theme 1: Guidelines of the pharmaceutical quality.b.Research theme 2: General practices recently applied in the pharmaceutical industry. Main outcome measures The following guidelines were identified and reviewed: WHO guidelines, FDA guidelines, EU guidelines and ICH guidelines in the research theme I. In research theme II; the following topics were identified and reviewed: quality risk management, quality by design, corrective actions and preventive actions, process capability analysis, Six Sigma, process analytical technology, lean manufacturing, total quality management, ISO series and HACCP. Results Upon reviewing the previously highlighted guidelines and the practices that are widely applied in the pharmaceutical industry, it was noticed that there is an abundant number of papers and articles that explain the general guidelines and practices but the literature lack those describing application; case studies of the pharmaceutical factories applying those guidelines and significance of those guidelines and practices. Conclusions It is recommended that the literature would invest more in the area of application and significance of guidelines and practices. New case studies should be done to prove the feasibility of such practices. PMID:26594110

In situ synthesis of alkenyl tetrazines for highly fluorogenic bioorthogonal live-cell imaging probes.

PubMed

Wu, Haoxing; Yang, Jun; Šečkutė, Jolita; Devaraj, Neal K

2014-06-02

In spite of the wide application potential of 1,2,4,5-tetrazines, particularly in live-cell and in vivo imaging, a major limitation has been the lack of practical synthetic methods. Here we report the in situ synthesis of (E)-3-substituted 6-alkenyl-1,2,4,5-tetrazine derivatives through an elimination-Heck cascade reaction. By using this strategy, we provide 24 examples of π-conjugated tetrazine derivatives that can be conveniently prepared from tetrazine building blocks and related halides. These include tetrazine analogs of biological small molecules, highly conjugated buta-1,3-diene-substituted tetrazines, and a diverse array of fluorescent probes suitable for live-cell imaging. These highly conjugated probes show very strong fluorescence turn-on (up to 400-fold) when reacted with dienophiles such as cyclopropenes and trans-cyclooctenes, and we demonstrate their application for live-cell imaging. This work provides an efficient and practical synthetic methodology for tetrazine derivatives and will facilitate the application of conjugated tetrazines, particularly as fluorogenic probes for live-cell imaging. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

[Use of social marketing in population health programs (literature review)].

PubMed

Kholmogorova, G T; Gladysheva, N V

1991-01-01

At present health education programmes abroad make wide use of social marketing strategy. Unlike commercial marketing whose purpose is competition and struggle for the expansion of commodity markets, social marketing is aimed at disseminating certain ideas or introducing certain practices, using largely the technological base and strategy of commercial marketing. The authors give 8 fundamental principles of social marketing (consumer orientation, the theory of barter, the analysis of audience and segmentation, special surveys to detect the orientation of population, the choice of channels for information transmission application of "marketing mixture", control of ongoing programme and marketing management). Application fields of social marketing in public health are discussed.

Development of Plant Control Diagnosis Technology and Increasing Its Applications

NASA Astrophysics Data System (ADS)

Kugemoto, Hidekazu; Yoshimura, Satoshi; Hashizume, Satoru; Kageyama, Takashi; Yamamoto, Toru

A plant control diagnosis technology was developed to improve the performance of plant-wide control and maintain high productivity of plants. The control performance diagnosis system containing this technology picks out the poor performance loop, analyzes the cause, and outputs the result on the Web page. Meanwhile, the PID tuning tool is used to tune extracted loops from the control performance diagnosis system. It has an advantage of tuning safely without process changes. These systems are powerful tools to do Kaizen (continuous improvement efforts) step by step, coordinating with the operator. This paper describes a practical technique regarding the diagnosis system and its industrial applications.

Gas Sensors Based on Semiconducting Metal Oxide One-Dimensional Nanostructures

PubMed Central

Huang, Jin; Wan, Qing

2009-01-01

This article provides a comprehensive review of recent (2008 and 2009) progress in gas sensors based on semiconducting metal oxide one-dimensional (1D) nanostructures. During last few years, gas sensors based on semiconducting oxide 1D nanostructures have been widely investigated. Additionally, modified or doped oxide nanowires/nanobelts have also been synthesized and used for gas sensor applications. Moreover, novel device structures such as electronic noses and low power consumption self-heated gas sensors have been invented and their gas sensing performance has also been evaluated. Finally, we also point out some challenges for future investigation and practical application. PMID:22303154

Sexual development in fish, practical applications for aquaculture.

PubMed

Cnaani, A; Levavi-Sivan, B

2009-01-01

Aquaculture is one of the fastest rising sectors of world food production. Hundreds of fish species are cultured, providing an affordable, high quality food source. Two aspects of sexual development are critically important for the continued improvement of cultured fish stocks: sexual dimorphism and control of reproduction. In this paper, we review the main methods used to control sex determination in fish and their application in some of the most widely cultured species. Specifically, we review the techniques available for the production of all-male, all-female, and sterile populations. Techniques for endocrinological control of reproduction are also discussed. 2009 S. Karger AG, Basel.

[Application of paramunity inducers in small animal practice].

PubMed

Proksch, A L; Hartmann, K

2016-01-01

Paramunity inducers have been used to treat small animals for decades. Paramunity inducers are based on attenuated and inactivated poxviruses (avipox virus and parapox virus). Their applications include both therapeutic and prophylactic use in various diseases. Despite their wide and variable use, only a very small number of placebo-controlled studies has been published. Positive effects in preventing kitten mortality and in treating feline stomatitis have been reported, however, no statistically significant effect of their therapeutic use in canine parvovirus infection, feline leukemia infection virus infection or canine papillomavirus infection could be demonstrated. For these infectious diseases, paramunity inducers do not appear to be effective.

Quantitative estimation of minimum offset for multichannel surface-wave survey with actively exciting source

USGS Publications Warehouse

Xu, Y.; Xia, J.; Miller, R.D.

2006-01-01

Multichannel analysis of surface waves is a developing method widely used in shallow subsurface investigations. The field procedures and related parameters are very important for successful applications. Among these parameters, the source-receiver offset range is seldom discussed in theory and normally determined by empirical or semi-quantitative methods in current practice. This paper discusses the problem from a theoretical perspective. A formula for quantitatively evaluating a layered homogenous elastic model was developed. The analytical results based on simple models and experimental data demonstrate that the formula is correct for surface wave surveys for near-surface applications. ?? 2005 Elsevier B.V. All rights reserved.

Lasers in periodontics.

PubMed

Elavarasu, Sugumari; Naveen, Devisree; Thangavelu, Arthiie

2012-08-01

Laser is one of the most captivating technologies in dental practice since Theodore Maiman in 1960 invented the ruby laser. Lasers in dentistry have revolutionized several areas of treatment in the last three and a half decades of the 20(th) century. Introduced as an alternative to mechanical cutting device, laser has now become an instrument of choice in many dental applications. Evidence suggests its use in initial periodontal therapy, surgery, and more recently, its utility in salvaging implant opens up a wide range of applications. More research with better designs are a necessity before lasers can become a part of dental armamentarium. This paper gives an insight to laser in periodontics.

Elastography in clinical practice.

PubMed

Barr, Richard G

2014-11-01

Elastography is a new technique that evaluates tissue stiffness. There are two elastography methods, strain and shear wave elastography. Both techniques are being used to evaluate a wide range of applications in medical imaging. Elastography of breast masses and prostates have been shown to have high accuracy for characterizing masses and can significantly decrease the need for biopsies. Shear wave elastography has been shown to be able to detect and grade liver fibrosis and may decrease the need for liver biopsy. Evaluation of other organs is still preliminary. This article reviews the principles of elastography and its potential clinical applications. Copyright © 2014 Elsevier Inc. All rights reserved.

Energy recovery with turboexpander processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holm, J.

1985-07-01

Although the primary function of turboexpanders has been to provide efficient, low-temperature refrigeration, the energy thus extracted has also been an important additional feature. Today, turboexpanders are proven reliable and used widely in the following applications discussed in this article: industrial gases; natural gas (NG) processing; production of liquefied natural gas (LNG); flashing hydrocarbon liquids; NG pressure letdown energy recovery; oilfield cogeneration; and recovery of energy from waste heat. Turboexpander applications for energy conservation resulted because available turboexpanders have the required high-performance capabilities and reliability. At the same time, the development of these energy conservation practices and processes helped furthermore » improve turboexpanders.« less

Lasers in periodontics

PubMed Central

Elavarasu, Sugumari; Naveen, Devisree; Thangavelu, Arthiie

2012-01-01

Laser is one of the most captivating technologies in dental practice since Theodore Maiman in 1960 invented the ruby laser. Lasers in dentistry have revolutionized several areas of treatment in the last three and a half decades of the 20th century. Introduced as an alternative to mechanical cutting device, laser has now become an instrument of choice in many dental applications. Evidence suggests its use in initial periodontal therapy, surgery, and more recently, its utility in salvaging implant opens up a wide range of applications. More research with better designs are a necessity before lasers can become a part of dental armamentarium. This paper gives an insight to laser in periodontics. PMID:23066266

Ionic liquids in chemical engineering.

PubMed

Werner, Sebastian; Haumann, Marco; Wasserscheid, Peter

2010-01-01

The development of engineering applications with ionic liquids stretches back to the mid-1990s when the first examples of continuous catalytic processes using ionic liquids and the first studies of ionic liquid-based extractions were published. Ever since, the use of ionic liquids has seen tremendous progress in many fields of chemistry and engineering, and the first commercial applications have been reported. The main driver for ionic liquid engineering applications is to make practical use of their unique property profiles, which are the result of a complex interplay of coulombic, hydrogen bonding and van der Waals interactions. Remarkably, many ionic liquid properties can be tuned in a wide range by structural modifications at their cation and anion. This review highlights specific examples of ionic liquid applications in catalysis and in separation technologies. Additionally, the application of ionic liquids as working fluids in process machines is introduced.

Implications of technology in music therapy practice and research for music therapy education: a review of literature.

PubMed

Crowe, Barbara J; Rio, Robin

2004-01-01

This article reviews the use of technology in music therapy practice and research for the purpose of providing music therapy educators and clinicians with specific and accurate accounts of the types and benefits of technology being used in various settings. Additionally, this knowledge will help universities comply with National Association of Schools of Music requirements and help to standardize the education and training of music therapists in this rapidly changing area. Information was gathered through a literature review of music therapy and related professional journals and a wide variety of books and personal communications. More data were gathered in a survey requesting information on current use of technology in education and practice. This solicitation was sent to all American Music Therapy Association approved universities and clinical training directors. Technology applications in music therapy are organized according to the following categories: (a) adapted musical instruments, (b) recording technology, (c) electric/electronic musical instruments, (d) computer applications, (e) medical technology, (f) assistive technology for the disabled, and (g) technology-based music/sound healing practices. The literature reviewed covers 177 books and articles from a span of almost 40 years. Recommendations are made for incorporating technology into music therapy course work and for review and revision of AMTA competencies. The need for an all-encompassing clinical survey of the use of technology in current music therapy practice is also identified.

A JAVA-based multimedia tool for clinical practice guidelines.

PubMed

Maojo, V; Herrero, C; Valenzuela, F; Crespo, J; Lazaro, P; Pazos, A

1997-01-01

We have developed a specific language for the representation of Clinical Practice Guidelines (CPGs) and Windows C++ and platform independent JAVA applications for multimedia presentation and edition of electronically stored CPGs. This approach facilitates translation of guidelines and protocols from paper to computer-based flowchart representations. Users can navigate through the algorithm with a friendly user interface and access related multimedia information within the context of each clinical problem. CPGs can be stored in a computer server and distributed over the World Wide Web, facilitating dissemination, local adaptation, and use as a reference element in medical care. We have chosen the Agency for Health Care and Policy Research's heart failure guideline to demonstrate the capabilities of our tool.

Social marketing's unique contribution to mental health stigma reduction and HIV testing: two case studies.

PubMed

Thackeray, Rosemary; Keller, Heidi; Heilbronner, Jennifer Messenger; Dellinger, Laura K Lee

2011-03-01

Since its inception in 2005, articles in Health Promotion Practice's social marketing department have focused on describing social marketing's unique contributions and the application of each to the practice of health promotion. This article provides a brief review of six unique features (marketing mix, consumer orientation, segmentation, exchange, competition, and continuous monitoring) and then presents two case studies-one on reducing stigma related to mental health and the other a large-scale campaign focused on increasing HIV testing among African American youth. The two successful case studies show that social marketing principles can be applied to a wide variety of topics among various population groups.

Electrical and optical 3D modelling of light-trapping single-photon avalanche diode

NASA Astrophysics Data System (ADS)

Zheng, Tianzhe; Zang, Kai; Morea, Matthew; Xue, Muyu; Lu, Ching-Ying; Jiang, Xiao; Zhang, Qiang; Kamins, Theodore I.; Harris, James S.

2018-02-01

Single-photon avalanche diodes (SPADs) have been widely used to push the frontier of scientific research (e.g., quantum science and single-molecule fluorescence) and practical applications (e.g., Lidar). However, there is a typical compromise between photon detection efficiency and jitter distribution. The light-trapping SPAD has been proposed to break this trade-off by coupling the vertically incoming photons into a laterally propagating mode while maintaining a small jitter and a thin Si device layer. In this work, we provide a 3D-based optical and electrical model based on practical fabrication conditions and discuss about design parameters, which include surface texturing, photon injection position, device area, and other features.

Loop-Mediated Isothermal Amplification for Salmonella Detection in Food and Feed: Current Applications and Future Directions

PubMed Central

Yang, Qianru; Domesle, Kelly J.

2018-01-01

Abstract Loop-mediated isothermal amplification (LAMP) has become a powerful alternative to polymerase chain reaction (PCR) for pathogen detection in clinical specimens and food matrices. Nontyphoidal Salmonella is a zoonotic pathogen of significant food and feed safety concern worldwide. The first study employing LAMP for the rapid detection of Salmonella was reported in 2005, 5 years after the invention of the LAMP technology in Japan. This review provides an overview of international efforts in the past decade on the development and application of Salmonella LAMP assays in a wide array of food and feed matrices. Recent progress in assay design, platform development, commercial application, and method validation is reviewed. Future perspectives toward more practical and wider applications of Salmonella LAMP assays in food and feed testing are discussed. PMID:29902082

Practical Applications of a Space Station

NASA Technical Reports Server (NTRS)

1984-01-01

The potential uses of a special station for civil and commercial applications is examined. Five panels of experts representing user-oriented communities, and a sixth panel which dealth with system design considerations, based their studies on the assumption that the station would be a large platform, capable of housing a wide array of diverse instruments, and could be either manned or unmanned. The Earth's Resources Panel dealt with applications of remote sensing for resource assessment. The Earth's Environment Panel dealt with the Earth's atmosphere and its impact on society. The Ocean Operations Panel looked at both science and applications. The Satellite Communications Panel assessed the potential role of a space station in the evolution of commercial telecommunication services up to the year 2000. The Materials Science and Engineering panel focused on the utility of a space station environment for materials processing.

Opportunities for Reducing Nitrate Export from Drainage Systems through In-field Nitrogen Management, Cropping Practices, and Drainage Design and Management

NASA Astrophysics Data System (ADS)

Helmers, M.; Zhou, X.; Qi, Z.; Christianson, R.; Pederson, C.

2011-12-01

Subsurface drainage systems are widely used throughout the upper Midwest corn-belt. While the use of these drainage systems has greatly increased crop production, they have also increased nitrate-nitrogen export to downstream waterbodies. As a result, there is a need to evaluate and implement management practices that have potential to reduce nitrate-nitrogen loss. A twenty year study in Iowa has shown that major factors in nitrate-nitrogen loss are land use and hydrology. Studies from north-central Iowa have also indicated that nitrogen application rate and to a lesser degree timing of nitrogen application important factors for nitrate-nitrogen loss. A four-year (2007-2010) drainage management study in southeast Iowa indicates that shallow and controlled drainage systems have potential to decrease subsurface drainage and thereby reduce nitrate-N loss from drain water but the level of implementation of controlled drainage may be limited by topography. Cropping practices through cover crops or perennial biomass crops have also been documented to have potential to reduce downstream nitrate-nitrogen export but the level of implementation may be limited by management and economic considerations. To achieve reduction goals for protection of local and regional water quality will require a combination of these practices at the landscape scale.

Application of Multimodality Imaging Fusion Technology in Diagnosis and Treatment of Malignant Tumors under the Precision Medicine Plan.

PubMed

Wang, Shun-Yi; Chen, Xian-Xia; Li, Yi; Zhang, Yu-Ying

2016-12-20

The arrival of precision medicine plan brings new opportunities and challenges for patients undergoing precision diagnosis and treatment of malignant tumors. With the development of medical imaging, information on different modality imaging can be integrated and comprehensively analyzed by imaging fusion system. This review aimed to update the application of multimodality imaging fusion technology in the precise diagnosis and treatment of malignant tumors under the precision medicine plan. We introduced several multimodality imaging fusion technologies and their application to the diagnosis and treatment of malignant tumors in clinical practice. The data cited in this review were obtained mainly from the PubMed database from 1996 to 2016, using the keywords of "precision medicine", "fusion imaging", "multimodality", and "tumor diagnosis and treatment". Original articles, clinical practice, reviews, and other relevant literatures published in English were reviewed. Papers focusing on precision medicine, fusion imaging, multimodality, and tumor diagnosis and treatment were selected. Duplicated papers were excluded. Multimodality imaging fusion technology plays an important role in tumor diagnosis and treatment under the precision medicine plan, such as accurate location, qualitative diagnosis, tumor staging, treatment plan design, and real-time intraoperative monitoring. Multimodality imaging fusion systems could provide more imaging information of tumors from different dimensions and angles, thereby offing strong technical support for the implementation of precision oncology. Under the precision medicine plan, personalized treatment of tumors is a distinct possibility. We believe that multimodality imaging fusion technology will find an increasingly wide application in clinical practice.

Mechanomyographic Parameter Extraction Methods: An Appraisal for Clinical Applications

PubMed Central

Ibitoye, Morufu Olusola; Hamzaid, Nur Azah; Zuniga, Jorge M.; Hasnan, Nazirah; Wahab, Ahmad Khairi Abdul

2014-01-01

The research conducted in the last three decades has collectively demonstrated that the skeletal muscle performance can be alternatively assessed by mechanomyographic signal (MMG) parameters. Indices of muscle performance, not limited to force, power, work, endurance and the related physiological processes underlying muscle activities during contraction have been evaluated in the light of the signal features. As a non-stationary signal that reflects several distinctive patterns of muscle actions, the illustrations obtained from the literature support the reliability of MMG in the analysis of muscles under voluntary and stimulus evoked contractions. An appraisal of the standard practice including the measurement theories of the methods used to extract parameters of the signal is vital to the application of the signal during experimental and clinical practices, especially in areas where electromyograms are contraindicated or have limited application. As we highlight the underpinning technical guidelines and domains where each method is well-suited, the limitations of the methods are also presented to position the state of the art in MMG parameters extraction, thus providing the theoretical framework for improvement on the current practices to widen the opportunity for new insights and discoveries. Since the signal modality has not been widely deployed due partly to the limited information extractable from the signals when compared with other classical techniques used to assess muscle performance, this survey is particularly relevant to the projected future of MMG applications in the realm of musculoskeletal assessments and in the real time detection of muscle activity. PMID:25479326

Monovalent Streptavidin that Senses Oligonucleotides**

PubMed Central

Wang, Jingxian; Kostic, Natasa; Stojanovic, Milan N.

2013-01-01

We report a straightforward chemical route to monovalent streptavidin, a valuable reagent for imaging. The one-step process is based on a (tris)biotinylated-oligonucleotide blocking three of streptavidin’s four biotin binding sites. Further, the complex is highly sensitive to single-base differences - whereby perfectly matched oligonucleotides trigger dissociation of the biotin-streptavidin interaction at higher rates than single-base mismatches. Unique properties and ease of synthesis open wide opportunities for practical applications in imaging and biosensing. PMID:23606329

Isolated Sub-Dehumidification Strategies in Large Supermarkets and Grocery Stores

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fricke, Brian A; Sharma, Vishaldeep

2011-10-01

The objective of this project was to determine the potential energy savings associated with reducing the relative humidity in the vicinity of refrigerated display cases in supermarkets, as compared to the widely accepted current practice of maintaining a relatively higher and uniform humidity level throughout the entire supermarket. Existing and new strategies for maintaining lower relative humidity levels near the vicinity of refrigerated display cases were analyzed to determine their effectiveness and limits of application.

Department of Clinical Investigation, Annual Research Progress Report, Fiscal Year 2006 (Madigan Army Medical Center)

DTIC Science & Technology

2006-09-30

45(4): p. 227-34, 2006. Roukis TS, Zgonis T. The management of acute Charcot fracture -dislocations with the Taylor’s spatial external fixation...Protocol No. S T Title Johnston GM #206028 C L Application of the Wells Criteria to determine Pretest Probability of Pulmonary Embolism ...Evaluation of Pulmonary Embolism - An Examination of Hospital-Wide Referral Practices Kwon HP #206087 O L Hemoptysis in Young Adults Kwon HP #206069

A Role for Judges in Assisted Dying

PubMed Central

Castelló, Ana; Francès, Francesc; Verdú, Fernando

2009-01-01

Medically provoked death, whether euthanasia or assisted suicide, is a common issue for discussion in various forums, participants coming from widely differing fields of knowledge, among who are, of course, doctors. Substantial legal differences exist in Europe on this issue and in an ever-wider Europe, it is essential, for practical reasons, that legislation be standardised. We would like to propose possible regulations that would provide effective safeguards in the application of euthanasia or assisted suicide. PMID:23908717

Successful Fiber Sensing Technologies and Hot Topics for the Near Future

NASA Astrophysics Data System (ADS)

López-Higuera, J. M.; Cobo, A.; Conde, Olga; Lomer, M.; Madruga, F.; Quintela, M. A.; Quintela, A.; Mirapeix, J.

2008-10-01

Inside the Photonics field Optical Fiber Sensors (OFS) are currently being used and will still be used in the future in a wide number of applications because its properties present technical advantages over traditional techniques or, sometimes, is practically the only feasible solution. In this paper, the more successful techniques will be reviewed. Then a prospective for the near future of the market and hot topics in which invest research resources will be suggested.

A course on professional development for astronomy graduate students

NASA Astrophysics Data System (ADS)

Friel, Eileen D.

2014-01-01

There is increasingly wide-spread recognition in astronomy that professional training must broaden beyond its traditional approaches to academic classes and research. Many recent community advisory reports, including the National Academy of Sciences Decadal survey, Astro2010, recommend that graduate education accommodate the variety of career paths taken by graduates, taking into account the wide range of activities scientists engage in and the skills necessary to succeed in career options both inside and outside academia and specific scientific disciplines. In response to this need, Indiana University has recently offered a new graduate seminar in astronomy to provide this broader perspective and to prepare students for a variety of career paths after graduate school. The course uses a mixture of class discussion on selected topics supplemented by short readings, activities that prepare students for seeking employment and practice some necessary skills, and discussions with astronomers who have followed a variety of career paths. An important part of the seminar is the practical preparation of complete applications for typical positions students are likely to pursue following graduation, and the revision of these applications to be appropriate for a non-traditional career path. The goal of the course is to make students aware of the many options for careers that will be available to them and the skills that will be important for their success, and to equip students with strategies for following a personally satisfying career path.

A review on the key issues for lithium-ion battery management in electric vehicles

NASA Astrophysics Data System (ADS)

Lu, Languang; Han, Xuebing; Li, Jianqiu; Hua, Jianfeng; Ouyang, Minggao

2013-03-01

Compared with other commonly used batteries, lithium-ion batteries are featured by high energy density, high power density, long service life and environmental friendliness and thus have found wide application in the area of consumer electronics. However, lithium-ion batteries for vehicles have high capacity and large serial-parallel numbers, which, coupled with such problems as safety, durability, uniformity and cost, imposes limitations on the wide application of lithium-ion batteries in the vehicle. The narrow area in which lithium-ion batteries operate with safety and reliability necessitates the effective control and management of battery management system. This present paper, through the analysis of literature and in combination with our practical experience, gives a brief introduction to the composition of the battery management system (BMS) and its key issues such as battery cell voltage measurement, battery states estimation, battery uniformity and equalization, battery fault diagnosis and so on, in the hope of providing some inspirations to the design and research of the battery management system.

Interferometric Fiber Optic Sensors

PubMed Central

Lee, Byeong Ha; Kim, Young Ho; Park, Kwan Seob; Eom, Joo Beom; Kim, Myoung Jin; Rho, Byung Sup; Choi, Hae Young

2012-01-01

Fiber optic interferometers to sense various physical parameters including temperature, strain, pressure, and refractive index have been widely investigated. They can be categorized into four types: Fabry-Perot, Mach-Zehnder, Michelson, and Sagnac. In this paper, each type of interferometric sensor is reviewed in terms of operating principles, fabrication methods, and application fields. Some specific examples of recently reported interferometeric sensor technologies are presented in detail to show their large potential in practical applications. Some of the simple to fabricate but exceedingly effective Fabry-Perot interferometers, implemented in both extrinsic and intrinsic structures, are discussed. Also, a wide variety of Mach-Zehnder and Michelson interferometric sensors based on photonic crystal fibers are introduced along with their remarkable sensing performances. Finally, the simultaneous multi-parameter sensing capability of a pair of long period fiber grating (LPG) is presented in two types of structures; one is the Mach-Zehnder interferometer formed in a double cladding fiber and the other is the highly sensitive Sagnac interferometer cascaded with an LPG pair. PMID:22736961

Current state of herbicides in herbicide-resistant crops.

PubMed

Green, Jerry M

2014-09-01

Current herbicide and herbicide trait practices are changing in response to the rapid spread of glyphosate-resistant weeds. Growers urgently needed glyphosate when glyphosate-resistant crops became available because weeds were becoming widely resistant to most commonly used selective herbicides, making weed management too complex and time consuming for large farm operations. Glyphosate made weed management easy and efficient by controlling all emerged weeds at a wide range of application timings. However, the intensive use of glyphosate over wide areas and concomitant decline in the use of other herbicides led eventually to the widespread evolution of weeds resistant to glyphosate. Today, weeds that are resistant to glyphosate and other herbicide types are threatening current crop production practices. Unfortunately, all commercial herbicide modes of action are over 20 years old and have resistant weed problems. The severity of the problem has prompted the renewal of efforts to discover new weed management technologies. One technology will be a new generation of crops with resistance to glyphosate, glufosinate and other existing herbicide modes of action. Other technologies will include new chemical, biological, cultural and mechanical methods for weed management. From the onset of commercialization, growers must now preserve the utility of new technologies by integrating their use with other weed management technologies in diverse and sustainable systems. © 2014 Society of Chemical Industry.

The Simple Lamb Wave Analysis to Characterize Concrete Wide Beams by the Practical MASW Test

PubMed Central

Lee, Young Hak; Oh, Taekeun

2016-01-01

In recent years, the Lamb wave analysis by the multi-channel analysis of surface waves (MASW) for concrete structures has been an effective nondestructive evaluation, such as the condition assessment and dimension identification by the elastic wave velocities and their reflections from boundaries. This study proposes an effective Lamb wave analysis by the practical application of MASW to concrete wide beams in an easy and simple manner in order to identify the dimension and elastic wave velocity (R-wave) for the condition assessment (e.g., the estimation of elastic properties). This is done by identifying the zero-order antisymmetric (A0) and first-order symmetric (S1) modes among multimodal Lamb waves. The MASW data were collected on eight concrete wide beams and compared to the actual depth and to the pressure (P-) wave velocities collected for the same specimen. Information is extracted from multimodal Lamb wave dispersion curves to obtain the elastic stiffness parameters and the thickness of the concrete structures. Due to the simple and cost-effective procedure associated with the MASW processing technique, the characteristics of several fundamental modes in the experimental Lamb wave dispersion curves could be measured. Available reference data are in good agreement with the parameters that were determined by our analysis scheme. PMID:28773562

Double-u double-u double-u dot APIC dot org: a review of the APIC World Wide Web site.

PubMed

Harr, J

1996-12-01

The widespread use of the Internet and the development of the World Wide Web have led to a revolution in electronic communication and information access. The Association for Professional in Infection Control and Epidemiology (APIC) has developed a site on the World Wide Web to provide mechanisms for international on-line information access and exchange on issues related to the practice of infection control and the application of epidemiology. From the home page of the APIC Web site, users can access information on professional resources, publications, educational offering, governmental affairs, the APIC organization, and the infection control profession. Among the chief features of the site is a discussion forum for posing questions and sharing information about infection control and epidemiology. The site also contains a searchable database of practice-related abstracts and descriptions and order forms for APIC publications. Users will find continuing education course descriptions and registration forms, legislative and regulatory action alerts and a congressional mailer, chapter and committee information, and infection control information of interest to the general public. APIC is considering several potential future enhancements to their Web site and will continue to review the site's content and features to provide current and useful information to infection control professionals.

Evolution of hemostatic agents in surgical practice

PubMed Central

Sundaram, Chandru P.; Keenan, Alison C.

2010-01-01

Objective: Topical hemostatic agents are used in a wide variety of surgical settings, and the evolution of this class of surgical tools is an interesting topic. We reviewed and outlined the historical progress of topical hemostats into present day surgery and urology, and highlight opportunities for future research. Materials and Methods: A MEDLINE search of all available literature concerning several classes of topical hemostatic agents was performed. Fibrins sealants, Gelatin sponge hemostatics, cyanoacrylate adhesives, oxidized regenerated cellulose, and microfibrillar collagen were included. References were chosen from a broad range of surgical literature. Results: Topical hemostatic agents have historically taken advantage of a wide variety of mechanisms for hemostasis. Fibrin sealants have a rich history and large potential for further applications. Gelatin sponge hemostatics have been widely used since their introduction, but have changed little. Cyanoacrylate adhesives have a unique mechanism and opportunity for novel applications of existing products. Oxidized cellulose was original in the use of plant-based components. Microfibrillar collagen hemostats have evolved to a wide variety of formats. Conclusions: A review of the evolution of topical hemostatic agents highlights opportunities for potential novel research. Fibrin sealants may have the most opportunity for advancement, and understanding the history of these products is useful. With the drive in urology for minimally invasive surgical techniques, adaptation of topical hemostatic agents to this surgical approach would be valuable and offers an opportunity for novel contributions. PMID:21116358

Chemical control of the Asian citrus psyllid and of huanglongbing disease in citrus.

PubMed

Boina, Dhana Raj; Bloomquist, Jeffrey R

2015-06-01

By 2014, huanglongbing (HLB), the most destructive disease of citrus, and its insect vector, the Asian citrus psyllid (ACP), Diaphorina citri (Kuwayama), became established in all major citrus-growing regions of the world, including the United States, with the exception of California. At present, application of insecticides is the most widely followed option for reducing ACP populations, while application of antibiotics for suppressing HLB disease/symptoms is being practiced in some citrus-growing regions. Application of insecticides during the dormant winter season, along with cultivation of HLB-free seedlings and early detection and removal of symptomatic and asymptomatic trees, has been very effective in managing ACP. Area-wide management of ACP by application of insecticides at low volume in large areas of citrus cultivation has been shown to be effective in managing HLB and reducing management costs. As insecticide resistance is a major problem in sustainable management of ACP, rotation/alternation of insecticides with different chemistries and modes of action needs to be followed. Besides control of the insect vector, use of antibiotics has temporarily suppressed the symptoms of HLB in diseased trees. Recent efforts to discover and screen existing as well as new compounds for their antibiotic and antimicrobial activities have identified some promising molecules for HLB control. There is an urgent need to find a sustainable solution to the HLB menace through chemical control of ACP populations and within HLB-infected trees through the judicious use of labeled insecticides (existing and novel chemistries) and antibiotics in area-wide management programs with due consideration to the insecticide resistance problem. © 2014 Society of Chemical Industry.

New vision to CuO, ZnO, and TiO2 nanoparticles: their outcome and effects

NASA Astrophysics Data System (ADS)

Chibber, Sandesh; Ansari, Shakeel Ahmed; Satar, Rukhsana

2013-04-01

Nanomaterials and nanotechnology have attracted more and more attention due to their wide ranges of applications in various fields. With a high level of surface energy, high magnetism, high surface area, and low melting point, engineered nanoparticles (ENPs) has been widely used in industry for various applications. Metal nanoparticles, in particular, have been shown to cause significant biological effects. Review discusses cytotoxic to neurotoxic effects of CuO, ZnO, and TiO2 nanoparticles based on the scenario drawn from various in vitro and in vivo studies. ENPs such as TiO2 and ZnO NPs have great practical importance in industrial applications. CuO NPs is also widely used in biomedical applications as catalyst supports, drug carriers, and gene delivery. However, study conducted on TiO2 NPs have forecast that oxidative DNA damage could be attributed due to reduced glutathione levels with concomitant increase in lipid peroxidation and reactive oxygen species generation. Moreover, there are many evidences showing that ZnO NP and CuO NPs generates ROS production and can cause cell death in different types of cultured cell. Nanoparticle toxicity is assessed by set of tests designed to characterize a given risk and also the mechanism for related outcomes. Conclusively, it becomes more and more important for nanotechnologist to understand the potential health effects of ENPs and what new methodology can be applied to reveal problems like gene silencing and inhibition in antioxidant defense mechanism which can be occurred on severe effects to oxidative stress by ENPs.

Development of Ultra-Low Power Metal Oxide Sensors and Arrays for Embedded Applications

NASA Astrophysics Data System (ADS)

Lutz, Brent; Wind, Rikard; Kostelecky, Clayton; Routkevitch, Dmitri; Deininger, Debra

2011-09-01

Metal oxide semiconductor sensors are widely used as individual sensors and in arrays, and a variety of designs for low power microhotplates have been demonstrated.1 Synkera Technologies has developed an embeddable chemical microsensor platform, based on a unique ceramic MEMS technology, for practical implementation in cell phones and other mobile electronic devices. Key features of this microsensor platform are (1) small size, (2) ultra-low power consumption, (3) high chemical sensitivity, (4) accurate response to a wide-range of threats, and (5) low cost. The sensor platform is enabled by a combination of advances in ceramic micromachining, and precision deposition of sensing films inside the high aspect ratio pores of anodic aluminum oxide (AAO).

Earth Remote Sensing: What is it Really? What to do with it?

NASA Technical Reports Server (NTRS)

Meeson, Blanche W.

1998-01-01

NASA!s Earth Sciences Program supports a wide range of endeavors in basic Earth system scientific research, technology development to support that research, development of materials and training for educators and students based on that research and information, and increasingly practical applications. A brief overview of the scope of this scientific research and the key features of the necessary remote sensing instrumentation will be given. I will also describe available educational materials and training courses for a wide range of grade levels. Information will be provided on how to obtain educational materials or to participate in a training course. Finally, a few examples will be given to illustrate how Earth remote sensing effects our daily life.

Biotechnological production and practical application of L-asparaginase enzyme.

PubMed

Vimal, Archana; Kumar, Awanish

2017-04-01

L-asparaginase is a vital enzyme of medical importance, and renowned as a chemotherapeutic agent. The relevance of this enzyme is not only limited as an anti-cancer agent, it also possesses a wide range of medical application. The application includes the antimicrobial property, treatment of infectious diseases, autoimmune diseases, canine and feline cancer. Apart from the health care industry, its significance is also established in the food sector as a food processing agent to reduce the acrylamide concentration. L-asparaginase is known to be produced from various bacterial, fungal and plant sources. However, there is a huge market demand due to its wide range of application. Therefore, the industry is still in the search of better-producing source in terms of high yield and low immunogenicity. It can be produced by both submerged and solid state fermentation, and each fermentation process has its own merits and demerits. This review paper focuses on its improved production strategy by adopting statistical experimental optimization techniques, development of recombinant strains, through mutagenesis and nanoparticle immobilization, adopting advanced and cost-effective purification techniques. Available research literature proves the competence and therapeutic potential of this enzyme. Therefore, research orientation toward the exploration of this clinical significant enzyme has to be accelerated. The objectives of this review are to discuss the high yielding sources, current production strategies, improvement of production, effective downstream processing and therapeutic application of L-asparaginase.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cao, Jianjun; Shen, Dongyi; Feng, Yaming

Negative refraction has attracted much interest for its promising capability in imaging applications. Such an effect can be implemented by negative index meta-materials, however, which are usually accompanied by high loss and demanding fabrication processes. Recently, alternative nonlinear approaches like phase conjugation and four wave mixing have shown advantages of low-loss and easy-to-implement, but associated problems like narrow accepting angles can still halt their practical applications. Here, we demonstrate theoretically and experimentally a scheme to realize negative refraction by nonlinear difference frequency generation with wide tunability, where a thin Beta barium borate slice serves as a negative refraction layer bendingmore » the input signal beam to the idler beam at a negative angle. Furthermore, we realize optical focusing effect using such nonlinear negative refraction, which may enable many potential applications in imaging science.« less

The Application of Voltage Transformer Simulator in Electrical Test Training

NASA Astrophysics Data System (ADS)

Li, Nan; Zhang, Jun; Chai, Ziqi; Wang, Jingpeng; Yang, Baowei

2018-02-01

The voltage transformer test is an important means to monitor its operating state. The accuracy and reliability of the test data is directly related to the test skill level of the operator. However, the risk of test instruments damage, equipment being tested damage and electric shock in operator is caused by improper operation when training the transformer test. In this paper, a simulation device of voltage transformer is set up, and a simulation model is built for the most common 500kV capacitor voltage transformer (CVT), the simulation model can realize several test items of CVT by combing with teaching guidance platform, simulation instrument, complete set of system software and auxiliary equipment in Changchun. Many successful applications show that the simulation device has good practical value and wide application prospect.

Development of a new type of high pressure calorimetric cell, mechanically agitated and equipped with a dynamic pressure control system: Application to the characterization of gas hydrates

NASA Astrophysics Data System (ADS)

Plantier, F.; Marlin, L.; Missima, D.; Torré, J.-P.

2013-12-01

A novel prototype of calorimetric cell has been developed allowing experiments under pressure with an in situ agitation system and a dynamic control of the pressure inside the cell. The use of such a system opens a wide range of potential practical applications for determining properties of complex fluids in both pressurized and agitated conditions. The technical details of this prototype and its calibration procedure are described, and an application devoted to the determination of phase equilibrium and phase change enthalpy of gas hydrates is presented. Our results, obtained with a good precision and reproducibility, were found in fairly good agreement with those found in literature, illustrate the various interests to use this novel apparatus.

Methods for Detecting Early Warnings of Critical Transitions in Time Series Illustrated Using Simulated Ecological Data

PubMed Central

Dakos, Vasilis; Carpenter, Stephen R.; Brock, William A.; Ellison, Aaron M.; Guttal, Vishwesha; Ives, Anthony R.; Kéfi, Sonia; Livina, Valerie; Seekell, David A.; van Nes, Egbert H.; Scheffer, Marten

2012-01-01

Many dynamical systems, including lakes, organisms, ocean circulation patterns, or financial markets, are now thought to have tipping points where critical transitions to a contrasting state can happen. Because critical transitions can occur unexpectedly and are difficult to manage, there is a need for methods that can be used to identify when a critical transition is approaching. Recent theory shows that we can identify the proximity of a system to a critical transition using a variety of so-called ‘early warning signals’, and successful empirical examples suggest a potential for practical applicability. However, while the range of proposed methods for predicting critical transitions is rapidly expanding, opinions on their practical use differ widely, and there is no comparative study that tests the limitations of the different methods to identify approaching critical transitions using time-series data. Here, we summarize a range of currently available early warning methods and apply them to two simulated time series that are typical of systems undergoing a critical transition. In addition to a methodological guide, our work offers a practical toolbox that may be used in a wide range of fields to help detect early warning signals of critical transitions in time series data. PMID:22815897

[SPRINT on clinical practice: It's time to change the management of arterial hypertension in Latin America?

PubMed

Galvez-Olortegui, José Kelvin; Condor-Rojas, Yudy; Galvez-Olortegui, Tomas Vladimir; Camacho-Saavedra, Luis

This paper analyzes the feasibility of the implementation of SPRINT trial results, the need to rethink the clinical practice guidelines(CPG) for the management of arterial hypertension and associated costs with daily practice applicability. SPRINT is a clinical trial comparing systolic blood pressure control <120mmHg and <140mmHg over cardiovascular complications, generating a great worldwide impact followed by publication of several studies that addressed relevance, usefulness, applicability and controversial aspects of SPRINT from different perspectives. Achieving blood pressure goals is one of the most discussed issue in widely used hypertension CPG around the world and in Latin American. SPRINT has generated and will generate a great impact on CPG, being necessary the reassessment of blood pressure goals and inclusion in future CPG, as has been considered in 2016 Canadian guideline and will be considered in NICE guideline update scheduled for June. The SPRINT trial raises new evidence for the management of hypertension, useful in people over 50 years, from urban populations, with defined cardiovascular risk without associated comorbidities. The applicability of SPRINT in Latin America is limited by increased costs associated with hypertensive patients' integrated health care, low care coverage, and lack of integrated care programs. Copyright © 2016 Instituto Nacional de Cardiología Ignacio Chávez. Publicado por Masson Doyma México S.A. All rights reserved.

Design and practice of a novel experiment teaching system based on the optoelectric information chain

NASA Astrophysics Data System (ADS)

Luo, Yunhan; Chen, Zhe; Li, Yan; Di, Hongwei; Li, Zhen; Bai, Chunhe; Tang, Jieyuan; Zhang, Jun; Yi, Xiao

2017-08-01

The course of optoelectronic information science is a diverse science and technology with wide range of disciplines, intensive technology, and strong applicability. As a result, the practice teaching in undergraduate education occupies the strategic important position, which is a key link in the process of innovative talents cultivation of photoelectric information, plays a unique and irreplaceable role by any other teaching methods. In order to meet the requirements of national innovative talents of photoelectric information, the complete teaching reform strategy was put forward by combining with the higher education policy and development strategy of teaching and professional characteristics. The goal of the experimental teaching reform is to cultivate innovative talents and to construct the photoelectric information industry chain system of experimental teaching platform and cultivating creative personnel. The key clue is the photoelectric information surrounding photoelectric information, like "generation - modulation - transformation - detection - procession" which will be realized by resource integration and complementary among cross disciplines, and focusing on scientific research support for the teaching and the combination of professional knowledge and practical application. This teaching reform scheme presented in the paper will provide very good demonstration effect in the curriculum reform of other photoelectric information related courses.

In-flight fiber optic acoustic emission sensor (FAESense) system for the real time detection, localization, and classification of damage in composite aircraft structures

NASA Astrophysics Data System (ADS)

Mendoza, Edgar; Prohaska, John; Kempen, Connie; Esterkin, Yan; Sun, Sunjian

2013-05-01

Acoustic emission sensing is a leading structural health monitoring technique use for the early warning detection of structural damage associated with impacts, cracks, fracture, and delaminations in advanced materials. Current AE systems based on electronic PZT transducers suffer from various limitations that prevent its wide dynamic use in practical avionics and aerospace applications where weight, size and power are critical for operation. This paper describes progress towards the development of a wireless in-flight distributed fiber optic acoustic emission monitoring system (FAESense™) suitable for the onboard-unattended detection, localization, and classification of damage in avionics and aerospace structures. Fiber optic AE sensors offer significant advantages over its counterpart electronic AE sensors by using a high-density array of micron-size AE transducers distributed and multiplex over long lengths of a standard single mode optical fiber. Immediate SHM applications are found in commercial and military aircraft, helicopters, spacecraft, wind mil turbine blades, and in next generation weapon systems, as well as in the petrochemical and aerospace industries, civil structures, power utilities, and a wide spectrum of other applications.

Efficient strategy for detecting gene × gene joint action and its application in schizophrenia.

PubMed

Won, Sungho; Kwon, Min-Seok; Mattheisen, Manuel; Park, Suyeon; Park, Changsoon; Kihara, Daisuke; Cichon, Sven; Ophoff, Roel; Nöthen, Markus M; Rietschel, Marcella; Baur, Max; Uitterlinden, Andre G; Hofmann, A; Lange, Christoph

2014-01-01

We propose a new approach to detect gene × gene joint action in genome-wide association studies (GWASs) for case-control designs. This approach offers an exhaustive search for all two-way joint action (including, as a special case, single gene action) that is computationally feasible at the genome-wide level and has reasonable statistical power under most genetic models. We found that the presence of any gene × gene joint action may imply differences in three types of genetic components: the minor allele frequencies and the amounts of Hardy-Weinberg disequilibrium may differ between cases and controls, and between the two genetic loci the degree of linkage disequilibrium may differ between cases and controls. Using Fisher's method, it is possible to combine the different sources of genetic information in an overall test for detecting gene × gene joint action. The proposed statistical analysis is efficient and its simplicity makes it applicable to GWASs. In the current study, we applied the proposed approach to a GWAS on schizophrenia and found several potential gene × gene interactions. Our application illustrates the practical advantage of the proposed method. © 2013 WILEY PERIODICALS, INC.

pyAudioAnalysis: An Open-Source Python Library for Audio Signal Analysis.

PubMed

Giannakopoulos, Theodoros

2015-01-01

Audio information plays a rather important role in the increasing digital content that is available today, resulting in a need for methodologies that automatically analyze such content: audio event recognition for home automations and surveillance systems, speech recognition, music information retrieval, multimodal analysis (e.g. audio-visual analysis of online videos for content-based recommendation), etc. This paper presents pyAudioAnalysis, an open-source Python library that provides a wide range of audio analysis procedures including: feature extraction, classification of audio signals, supervised and unsupervised segmentation and content visualization. pyAudioAnalysis is licensed under the Apache License and is available at GitHub (https://github.com/tyiannak/pyAudioAnalysis/). Here we present the theoretical background behind the wide range of the implemented methodologies, along with evaluation metrics for some of the methods. pyAudioAnalysis has been already used in several audio analysis research applications: smart-home functionalities through audio event detection, speech emotion recognition, depression classification based on audio-visual features, music segmentation, multimodal content-based movie recommendation and health applications (e.g. monitoring eating habits). The feedback provided from all these particular audio applications has led to practical enhancement of the library.

pyAudioAnalysis: An Open-Source Python Library for Audio Signal Analysis

PubMed Central

Giannakopoulos, Theodoros

2015-01-01

Audio information plays a rather important role in the increasing digital content that is available today, resulting in a need for methodologies that automatically analyze such content: audio event recognition for home automations and surveillance systems, speech recognition, music information retrieval, multimodal analysis (e.g. audio-visual analysis of online videos for content-based recommendation), etc. This paper presents pyAudioAnalysis, an open-source Python library that provides a wide range of audio analysis procedures including: feature extraction, classification of audio signals, supervised and unsupervised segmentation and content visualization. pyAudioAnalysis is licensed under the Apache License and is available at GitHub (https://github.com/tyiannak/pyAudioAnalysis/). Here we present the theoretical background behind the wide range of the implemented methodologies, along with evaluation metrics for some of the methods. pyAudioAnalysis has been already used in several audio analysis research applications: smart-home functionalities through audio event detection, speech emotion recognition, depression classification based on audio-visual features, music segmentation, multimodal content-based movie recommendation and health applications (e.g. monitoring eating habits). The feedback provided from all these particular audio applications has led to practical enhancement of the library. PMID:26656189

Supporting secure programming in web applications through interactive static analysis.

PubMed

Zhu, Jun; Xie, Jing; Lipford, Heather Richter; Chu, Bill

2014-07-01

Many security incidents are caused by software developers' failure to adhere to secure programming practices. Static analysis tools have been used to detect software vulnerabilities. However, their wide usage by developers is limited by the special training required to write rules customized to application-specific logic. Our approach is interactive static analysis, to integrate static analysis into Integrated Development Environment (IDE) and provide in-situ secure programming support to help developers prevent vulnerabilities during code construction. No additional training is required nor are there any assumptions on ways programs are built. Our work is motivated in part by the observation that many vulnerabilities are introduced due to failure to practice secure programming by knowledgeable developers. We implemented a prototype interactive static analysis tool as a plug-in for Java in Eclipse. Our technical evaluation of our prototype detected multiple zero-day vulnerabilities in a large open source project. Our evaluations also suggest that false positives may be limited to a very small class of use cases.

Application of systems thinking in health: opportunities for translating theory into practice Comment on "Constraints to applying systems thinking concepts in health systems: a regional perspective from surveying stakeholders in Eastern Mediterranean countries".

PubMed

Malik, Asmat Ullah

2015-03-19

Systems thinking is not a new concept to health system strengthening; however, one question remains unanswered: How policy-makers, system designers and consultants with a system thinking philosophy should act (have acted) as potential change agents in actually gaining opportunities to introduce systems thinking? Development of Comprehensive Multi-Year Plans (cMYPs) for Immunization System is one such opportunity because almost all Low- and Middle-Income Countries (LMICs) develop and implement cMYPs every five years. Without building upon examples and showing practical application, the discussions and deliberations on systems thinking may fade away with passage of time. There are opportunities that exist around us in our existing health systems that we can benefit from starting with an incremental approach and generating evidence for longer lasting system-wide changes. © 2015 by Kerman University of Medical Sciences.

Supporting secure programming in web applications through interactive static analysis

PubMed Central

Zhu, Jun; Xie, Jing; Lipford, Heather Richter; Chu, Bill

2013-01-01

Many security incidents are caused by software developers’ failure to adhere to secure programming practices. Static analysis tools have been used to detect software vulnerabilities. However, their wide usage by developers is limited by the special training required to write rules customized to application-specific logic. Our approach is interactive static analysis, to integrate static analysis into Integrated Development Environment (IDE) and provide in-situ secure programming support to help developers prevent vulnerabilities during code construction. No additional training is required nor are there any assumptions on ways programs are built. Our work is motivated in part by the observation that many vulnerabilities are introduced due to failure to practice secure programming by knowledgeable developers. We implemented a prototype interactive static analysis tool as a plug-in for Java in Eclipse. Our technical evaluation of our prototype detected multiple zero-day vulnerabilities in a large open source project. Our evaluations also suggest that false positives may be limited to a very small class of use cases. PMID:25685513

Energy Dispersive Spectrometry and Quantitative Analysis Short Course. Introduction to X-ray Energy Dispersive Spectrometry and Quantitative Analysis

NASA Technical Reports Server (NTRS)

Carpenter, Paul; Curreri, Peter A. (Technical Monitor)

2002-01-01

This course will cover practical applications of the energy-dispersive spectrometer (EDS) to x-ray microanalysis. Topics covered will include detector technology, advances in pulse processing, resolution and performance monitoring, detector modeling, peak deconvolution and fitting, qualitative and quantitative analysis, compositional mapping, and standards. An emphasis will be placed on use of the EDS for quantitative analysis, with discussion of typical problems encountered in the analysis of a wide range of materials and sample geometries.

Practical uncertainty reduction and quantification in shock physics measurements

DOE PAGES

Akin, M. C.; Nguyen, J. H.

2015-04-20

We report the development of a simple error analysis sampling method for identifying intersections and inflection points to reduce total uncertainty in experimental data. This technique was used to reduce uncertainties in sound speed measurements by 80% over conventional methods. Here, we focused on its impact on a previously published set of Mo sound speed data and possible implications for phase transition and geophysical studies. However, this technique's application can be extended to a wide range of experimental data.

Direct one-pot reductive amination of aldehydes with nitroarenes in a domino fashion: catalysis by gum-acacia-stabilized palladium nanoparticles.

PubMed

Sreedhar, B; Reddy, P Surendra; Devi, D Keerthi

2009-11-20

This note describes the direct reductive amination of carbonyl compounds with nitroarenes using gum acacia-palladium nanoparticles, employing molecular hydrogen as the reductant. This methodology is found to be applicable to both aliphatic and aromatic aldehydes and a wide range of nitroarenes. The operational simplicity and the mild reaction conditions add to the value of this method as a practical alternative to the reductive amination of carbonyl compounds.

Holographic Control Of Radial Distribution Of Myelinized Nervous Fiber Refractive Index In Vitality State

NASA Astrophysics Data System (ADS)

Antonov I., P.; Goroshkov A., V.; Kalyunov V., N.; Markhvida I., V.; Rubanov A., S.; Tanin L., V.

1983-12-01

The role of investigation of peripheral vervous fibers in bitality state is of great importance when elucidating the mechanism of a stimulant low-energy laser radiation influence which is widely applicable, for example, in practice for curing lumbar osteochondros-is (1), trigeminal verve radiculitis, and in developing the processes of transmission and processing of the information required for sustaining organism homeostasis. Using both electrophysiologic and holographic methods simultaneously can increase total information and authenticity of these investigations.

Testing For EM Upsets In Aircraft Control Computers

NASA Technical Reports Server (NTRS)

Belcastro, Celeste M.

1994-01-01

Effects of transient electrical signals evaluated in laboratory tests. Method of evaluating nominally fault-tolerant, aircraft-type digital-computer-based control system devised. Provides for evaluation of susceptibility of system to upset and evaluation of integrity of control when system subjected to transient electrical signals like those induced by electromagnetic (EM) source, in this case lightning. Beyond aerospace applications, fault-tolerant control systems becoming more wide-spread in industry; such as in automobiles. Method supports practical, systematic tests for evaluation of designs of fault-tolerant control systems.

Traumatic brain injury in modern war

NASA Astrophysics Data System (ADS)

Ling, Geoffrey S. F.; Hawley, Jason; Grimes, Jamie; Macedonia, Christian; Hancock, James; Jaffee, Michael; Dombroski, Todd; Ecklund, James M.

2013-05-01

Traumatic brain injury (TBI) is common and especially with military service. In Iraq and Afghanistan, explosive blast related TBI has become prominent and is mainly from improvised explosive devices (IED). Civilian standard of care clinical practice guidelines (CPG) were appropriate has been applied to the combat setting. When such CPGs do not exist or are not applicable, new practice standards for the military are created, as for TBI. Thus, CPGs for prehospital care of combat TBI CPG [1] and mild TBI/concussion [2] were introduced as was a DoD system-wide clinical care program, the first large scale system wide effort to address all severities of TBI in a comprehensive organized way. As TBI remains incompletely understood, substantial research is underway. For the DoD, leading this effort are The Defense and Veterans Brain Injury Center, National Intrepid Center of Excellence and the Defense Centers of Excellence for Psychological Health and Traumatic Brain Injury. This program is a beginning, a work in progress ready to leverage advances made scientifically and always with the intent of providing the best care to its military beneficiaries.

Applying the RE-AIM conceptual framework for the promotion of physical activity in low- and middle-income countries

PubMed Central

Lee, Rebecca E.; Galavíz, Karla I.; Soltero, Erica G.; Rosales Chavez, Jose; Jauregui, Edtna; Lévesque, Lucie; Hernández, Luis Ortiz; Lopez y Taylor, Juan; Estabrooks, Paul A.

2017-01-01

ABSTRACT Objective: the RE-AIM framework has been widely used to evaluate internal and external validity of interventions aimed to promote physical activity, helping to provide comprehensive evaluation of the reach, efficacy, adoption, implementation and maintenance of research and programming. Despite this progress, the RE-AIM framework has not been used widely in Latin America. The purpose of this manuscript is to describe the RE-AIM framework, the process and materials developed for a one-day workshop in Guadalajara, and the acceptability and satisfaction of participants that attended the workshop. Methods: lecture, interactive examples and an agenda were developed for a one-day RE-AIM workshop over a three month period. Results: thirty two health care practitioners (M age = 30.6, SD=9.9 years) attended the workshop. Most (100%) rated the workshop as credible, useful (100%) and intended to apply it in current or future research (95%). Conclusion: results suggest intuitive appeal of the RE-AIM framework, and provide a strategy for introducing the utility and practical application of the framework in practice settings in Mexico and Latin America.

The effect of mixed dopants on the stability of Fricke gel dosimeters

NASA Astrophysics Data System (ADS)

Penev, K.; Mequanint, K.

2013-06-01

Auto-oxidation and fast diffusion in Fricke gels are major drawbacks to wide-spread application of these gels in 3D dosimetry. Aiming to limit both processes, we used mixed dopants: the ferric-specific ligand xylenol orange with a ferrous-specific ligand (1,10-phenanthroline) and/or a bi-functional cross-linking agent (glyoxal). Markedly improved auto-oxidation stability was observed in the xylenol orange and phenanthroline doped gel at the expense of increased background absorbance and faster diffusion. Addition of glyoxal limited the diffusion rate and led to a partial bleaching of the gel. It is conceivable that these two new compositions may find useful practical application.

Towards practical implementation of biophotonics-based solutions for cost-effective monitoring of food quality control (Conference Presentation)

NASA Astrophysics Data System (ADS)

Meglinski, Igor; Popov, Alexey; Bykov, Alexander

2017-03-01

Biophotonics-based diagnostic and imaging modalities have been widely used in various applications associated with the non-invasive imaging of the internal structure of a range biological media from a range of cells cultures to biological tissues. With the fast growing interest in food securities there remains strong demand to apply reliable and cost effective biophotonics-based technologies for rapid screening of freshness, internal defects and quality of major agricultural products. In current presentation the results of application of optical coherence tomography (OCT) and encapsulated optical bio-sensors for quantitative assessment of freshness of agricultural products, such as meat and sea foods, are presented, and their further perspectives are discussed.

A Rigorous Framework for Optimization of Expensive Functions by Surrogates

NASA Technical Reports Server (NTRS)

Booker, Andrew J.; Dennis, J. E., Jr.; Frank, Paul D.; Serafini, David B.; Torczon, Virginia; Trosset, Michael W.

1998-01-01

The goal of the research reported here is to develop rigorous optimization algorithms to apply to some engineering design problems for which design application of traditional optimization approaches is not practical. This paper presents and analyzes a framework for generating a sequence of approximations to the objective function and managing the use of these approximations as surrogates for optimization. The result is to obtain convergence to a minimizer of an expensive objective function subject to simple constraints. The approach is widely applicable because it does not require, or even explicitly approximate, derivatives of the objective. Numerical results are presented for a 31-variable helicopter rotor blade design example and for a standard optimization test example.

Possible applications for municipal solid waste fly ash.

PubMed

Ferreira, C; Ribeiro, A; Ottosen, L

2003-01-31

The present study focuses on existing practices related to the reuse of Municipal Solid Waste (MSW) fly ash and identifies new potential uses. Nine possible applications were identified and grouped into four main categories: construction materials (cement, concrete, ceramics, glass and glass-ceramics); geotechnical applications (road pavement, embankments); "agriculture" (soil amendment); and, miscellaneous (sorbent, sludge conditioning). Each application is analysed in detail, including final-product technical characteristics, with a special emphasis on environmental impacts. A comparative analysis of the different options is performed, stressing the advantages but also the weaknesses of each option. This information is systemized in order to provide a framework for the selection of best technology and final products. The results presented here show new possibilities for this waste reuse in a short-term, in a wide range of fields, resulting in great advantages in waste minimization as well as resources conservation.

Toward practical SERS sensing

NASA Astrophysics Data System (ADS)

Zhao, Yiping

2012-06-01

Since its discovery more than 30 years ago, surface-enhanced Raman scattering (SERS) has been recognized as a highly sensitive detection technique for chemical and biological sensing and medical diagnostics. However, the practical application of this remarkably sensitive technique has not been widely accepted as a viable diagnostic method due to the difficulty in preparing robust and reproducible substrates that provide maximum SERS enhancement. Here, we demonstrate that the aligned silver nanorod (AgNR) array substrates engineered by the oblique angle deposition method are capable of providing extremely high SERS enhancement factors (>108). The substrates are large area, uniform, reproducible, and compatible with general microfabrication process. The enhancement factor depends strongly on the length and shape of the Ag nanorods and the underlying substrate coating. By optimizing AgNR SERS substrates, we show that SERS is able to detect trace amount of toxins, virus, bacteria, or other chemical and biological molecules, and distinguish different viruses/bacteria and virus/bacteria strains. The substrate can be tailored into a multi-well chip for high throughput screening, integrated into fiber tip for portable sensing, incorporated into fluid/microfluidic devices for in situ real-time monitoring, fabricated onto a flexible substrate for tracking and identification, or used as on-chip separation device for ultra-thin layer chromatography and diagnostics. By combining the unique SERS substrates with a handheld Raman system, it can become a practical and portable sensor system for field applications. All these developments have demonstrated that AgNR SERS substrates could play an important role in the future for practical clinical, industrial, defense, and security sensing applications.

Modeling using discrete event simulation: a report of the ISPOR-SMDM Modeling Good Research Practices Task Force--4.

PubMed

Karnon, Jonathan; Stahl, James; Brennan, Alan; Caro, J Jaime; Mar, Javier; Möller, Jörgen

2012-01-01

Discrete event simulation (DES) is a form of computer-based modeling that provides an intuitive and flexible approach to representing complex systems. It has been used in a wide range of health care applications. Most early applications involved analyses of systems with constrained resources, where the general aim was to improve the organization of delivered services. More recently, DES has increasingly been applied to evaluate specific technologies in the context of health technology assessment. The aim of this article was to provide consensus-based guidelines on the application of DES in a health care setting, covering the range of issues to which DES can be applied. The article works through the different stages of the modeling process: structural development, parameter estimation, model implementation, model analysis, and representation and reporting. For each stage, a brief description is provided, followed by consideration of issues that are of particular relevance to the application of DES in a health care setting. Each section contains a number of best practice recommendations that were iterated among the authors, as well as among the wider modeling task force. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Why are we not evaluating multiple competing hypotheses in ecology and evolution?

PubMed Central

Avgar, Tal; Fryxell, John M.

2017-01-01

The use of multiple working hypotheses to gain strong inference is widely promoted as a means to enhance the effectiveness of scientific investigation. Only 21 of 100 randomly selected studies from the ecological and evolutionary literature tested more than one hypothesis and only eight tested more than two hypotheses. The surprising rarity of application of multiple working hypotheses suggests that this gap between theory and practice might reflect some fundamental issues. Here, we identify several intellectual and practical barriers that discourage us from using multiple hypotheses in our scientific investigation. While scientists have developed a number of ways to avoid biases, such as the use of double-blind controls, we suspect that few scientists are fully aware of the potential influence of cognitive bias on their decisions and they have not yet adopted many techniques available to overcome intellectual and practical barriers in order to improve scientific investigation. PMID:28280578

Experimental investigation of practical unforgeable quantum money

NASA Astrophysics Data System (ADS)

Bozzio, Mathieu; Orieux, Adeline; Trigo Vidarte, Luis; Zaquine, Isabelle; Kerenidis, Iordanis; Diamanti, Eleni

2018-01-01

Wiesner's unforgeable quantum money scheme is widely celebrated as the first quantum information application. Based on the no-cloning property of quantum mechanics, this scheme allows for the creation of credit cards used in authenticated transactions offering security guarantees impossible to achieve by classical means. However, despite its central role in quantum cryptography, its experimental implementation has remained elusive because of the lack of quantum memories and of practical verification techniques. Here, we experimentally implement a quantum money protocol relying on classical verification that rigorously satisfies the security condition for unforgeability. Our system exploits polarization encoding of weak coherent states of light and operates under conditions that ensure compatibility with state-of-the-art quantum memories. We derive working regimes for our system using a security analysis taking into account all practical imperfections. Our results constitute a major step towards a real-world realization of this milestone protocol.

A Case for Pharmacogenomics in Management of Cardiac Arrhythmias

PubMed Central

Kandoi, Gaurav; Nanda, Anjali; Scaria, Vinod; Sivasubbu, Sridhar

2012-01-01

Disorders of the cardiac rhythm are quite prevalent in clinical practice. Though the variability in drug response between individuals has been extensively studied, this information has not been widely used in clinical practice. Rapid advances in the field of pharmacogenomics have provided us with crucial insights on inter-individual genetic variability and its impact on drug metabolism and action. Technologies for faster and cheaper genetic testing and even personal genome sequencing would enable clinicians to optimize prescription based on the genetic makeup of the individual, which would open up new avenues in the area of personalized medicine. We have systematically looked at literature evidence on pharmacogenomics markers for anti-arrhythmic agents from the OpenPGx consortium collection and reason the applicability of genetics in the management of arrhythmia. We also discuss potential issues that need to be resolved before personalized pharmacogenomics becomes a reality in regular clinical practice. PMID:22557843

Practical applications of hand-held computers in dermatology.

PubMed

Goldblum, Orin M

2002-09-01

For physicians, hand-held computers are gaining popularity as point of care reference tools. The convergence of hand-held computers, the Internet, and wireless networks will enable these devices to assume more essential roles as mobile transmitters and receivers of digital medical Information. In addition to serving as portable medical reference sources, these devices can be Internet-enabled, allowing them to communicate over wireless wide and local area networks. With enhanced wireless connectivity, hand-held computers can be used at the point of patient care for charge capture, electronic prescribing, laboratory test ordering, laboratory result retrieval, web access, e-mail communication, and other clinical and administrative tasks. Physicians In virtually every medical specialty have begun using these devices in various ways. This review of hand-held computer use in dermatology illustrates practical examples of the many different ways hand-held computers can be effectively used by the practicing dermatologist.

Scanned-wavelength diode laser sensors for harsh environments

NASA Astrophysics Data System (ADS)

Jeffries, Jay B.; Sanders, Scott T.; Zhou, Xin; Ma, Lin; Mattison, Daniel W.; Hanson, Ronald K.

2002-09-01

Diode laser absorption offers the possibility of high-speed, robust, and rugged sensors for a wide variety of practical applications. Pressure broadening complicates absorption measurements of gas temperature and species concentrations in high-pressure, high-temperature practical environments. More agile wavelength scanning can enable measurements of temperature and species concentrations in flames and engines as demonstrated by example measurements using wavelength scanning of a single DFB in laboratory flames or a vertical cavity surface emitting laser (VCSEL) in a pulse detonation engine environment. Although the blending of multiple transitions by pressure broadening complicates the atmospheric pressure spectrum of C2H4 fuel, a scanned wavelength strategy enables quantitative measurement of fuel/oxidizer stoichiometry. Wavelength-agile scanning techniques enable high-speed measurements in these harsh environments.

[Possibilities of use of digital imaging in forensic medicine].

PubMed

Gaval'a, P; Ivicsics, I; Mlynár, J; Novomeský, F

2005-07-01

Based on the daily practice with digital photography and documentation, the authors point out the achievements of the computer technologies implementation to the practice of forensic medicine. The modern methods of imaging, especially the digital photography, offer a wide spectrum of use in forensic medicine--the digital documentation and archivation of autopsy findings, the possibility of immediate consultation of findings with another experts via Internet, and many others. Another possibility is a creation of digital photographic atlas of forensic medicine as a useful aid in pre- and postgradual study. Thus the application of the state-of-the-art computer technologies to the forensic medicine discloses the unknown before possibilities for further development of such a discipline of human medical sciences.

Construction of Chinese adult male phantom library and its application in the virtual calibration of in vivo measurement.

PubMed

Chen, Yizheng; Qiu, Rui; Li, Chunyan; Wu, Zhen; Li, Junli

2016-03-07

In vivo measurement is a main method of internal contamination evaluation, particularly for large numbers of people after a nuclear accident. Before the practical application, it is necessary to obtain the counting efficiency of the detector by calibration. The virtual calibration based on Monte Carlo simulation usually uses the reference human computational phantom, and the morphological difference between the monitored personnel with the calibrated phantom may lead to the deviation of the counting efficiency. Therefore, a phantom library containing a wide range of heights and total body masses is needed. In this study, a Chinese reference adult male polygon surface (CRAM_S) phantom was constructed based on the CRAM voxel phantom, with the organ models adjusted to match the Chinese reference data. CRAM_S phantom was then transformed to sitting posture for convenience in practical monitoring. Referring to the mass and height distribution of the Chinese adult male, a phantom library containing 84 phantoms was constructed by deforming the reference surface phantom. Phantoms in the library have 7 different heights ranging from 155 cm to 185 cm, and there are 12 phantoms with different total body masses in each height. As an example of application, organ specific and total counting efficiencies of Ba-133 were calculated using the MCNPX code, with two series of phantoms selected from the library. The influence of morphological variation on the counting efficiency was analyzed. The results show only using the reference phantom in virtual calibration may lead to an error of 68.9% for total counting efficiency. Thus the influence of morphological difference on virtual calibration can be greatly reduced using the phantom library with a wide range of masses and heights instead of a single reference phantom.

Synthesis of u-channelled spherical Fex(CoyNi1-y)100-x Janus colloidal particles with excellent electromagnetic wave absorption performance.

PubMed

Li, Hao; Cao, Zhenming; Lin, Jiayao; Zhao, Hui; Jiang, Qiaorong; Jiang, Zhiyuan; Liao, Honggang; Kuang, Qin; Xie, Zhaoxiong

2018-01-25

Due to their distinctive structure, inherently anisotropic properties and broad applications, Janus colloidal particles have attracted tremendous attention and it is significant to synthesize high yield Janus colloidal particles in a cost-effective and reliable way. On the other hand, due to the expanded electromagnetic interference problems, it is highly desired to develop excellent electromagnetic wave absorbing materials with an ultra-wide absorption bandwidth for practical application. Herein, a confined liquid-solid redox reaction strategy has been developed to fabricate a series of Fe x (Co y Ni 1-y ) 100-x ternary alloy particles. The as-prepared particles are in the form of u-channelled noncentrosymmetric spheres, one kind of Janus colloidal particles which have been rarely observed. Due to the combination and synergy effects of multi-magnetic metals, the polycrystalline structure and their specific morphology, the as-prepared particles possess multiple magnetic resonance and multiple dielectric relaxation processes, and therefore show excellent electromagnetic wave absorption performances. In particular, the strongest reflection loss (RL) of the Fe 15 (Co 0.2 Ni 0.8 ) 85 Janus colloidal particles is up to -36.9 dB with a thickness of 2.5 mm, and the effective absorption (RL < -10 dB) bandwidth can reach 9.2 GHz (8-17.2 GHz) with a thickness of 2 mm. Such a wide bandwidth has barely been reported for magnetic metal alloys under a single thickness. These results suggest that the Fe x (Co y Ni 1-y ) 100-x Janus particles could be a promising candidate for highly efficient electromagnetic wave absorbing materials for practical application.

Construction of Chinese adult male phantom library and its application in the virtual calibration of in vivo measurement

NASA Astrophysics Data System (ADS)

Chen, Yizheng; Qiu, Rui; Li, Chunyan; Wu, Zhen; Li, Junli

2016-03-01

In vivo measurement is a main method of internal contamination evaluation, particularly for large numbers of people after a nuclear accident. Before the practical application, it is necessary to obtain the counting efficiency of the detector by calibration. The virtual calibration based on Monte Carlo simulation usually uses the reference human computational phantom, and the morphological difference between the monitored personnel with the calibrated phantom may lead to the deviation of the counting efficiency. Therefore, a phantom library containing a wide range of heights and total body masses is needed. In this study, a Chinese reference adult male polygon surface (CRAM_S) phantom was constructed based on the CRAM voxel phantom, with the organ models adjusted to match the Chinese reference data. CRAMS phantom was then transformed to sitting posture for convenience in practical monitoring. Referring to the mass and height distribution of the Chinese adult male, a phantom library containing 84 phantoms was constructed by deforming the reference surface phantom. Phantoms in the library have 7 different heights ranging from 155 cm to 185 cm, and there are 12 phantoms with different total body masses in each height. As an example of application, organ specific and total counting efficiencies of Ba-133 were calculated using the MCNPX code, with two series of phantoms selected from the library. The influence of morphological variation on the counting efficiency was analyzed. The results show only using the reference phantom in virtual calibration may lead to an error of 68.9% for total counting efficiency. Thus the influence of morphological difference on virtual calibration can be greatly reduced using the phantom library with a wide range of masses and heights instead of a single reference phantom.

Skin care practice in German nursing homes: a German-wide cross-sectional study.

PubMed

Kottner, Jan; Rahn, Yasmin; Blume-Peytavi, Ulrike; Lahmann, Nils

2013-04-01

Due to anatomical and physiological changes in the course of aging and due to increased vulnerability, there are special skin care needs in elderly and care-dependent persons. Little is known about skin care practice in German long-term care facilities. The aim of the study was to gather epidemiological data about skin care practice in German nursing homes. In spring 2012 a German-wide cross sectional study was conducted in 47 nursing homes. Based on standardized data collection sheets. demographics and variables about methods and frequencies of skin cleansing and application of skin care products for 3 552 nursing home residents were collected and analyzed. The variables age, gender and level of care dependency was representative for the group of all German nursing home residents. More than 90% of investigated nursing home residents required skin care assistance. Washing body parts or the whole body were conducted most frequently (89.1%, 95% CI 88.0- 90.1). Skin care leave-on products were used in 91.7% (95% CI 90.7-92.6), whereas there were large variations between individuals. In total, more than 100 brands were used. Skin care practice in multimorbid care dependent persons shows large variations. How skin care products meet the special requirements of aged skin and whether they enhance the skin barrier function and prevent cuteneous skin damage is unknown. © The Authors • Journal compilation © Blackwell Verlag GmbH, Berlin.

Nanocrystalline ZnON; High mobility and low band gap semiconductor material for high performance switch transistor and image sensor application

PubMed Central

Lee, Eunha; Benayad, Anass; Shin, Taeho; Lee, HyungIk; Ko, Dong-Su; Kim, Tae Sang; Son, Kyoung Seok; Ryu, Myungkwan; Jeon, Sanghun; Park, Gyeong-Su

2014-01-01

Interest in oxide semiconductors stems from benefits, primarily their ease of process, relatively high mobility (0.3–10 cm2/vs), and wide-bandgap. However, for practical future electronic devices, the channel mobility should be further increased over 50 cm2/vs and wide-bandgap is not suitable for photo/image sensor applications. The incorporation of nitrogen into ZnO semiconductor can be tailored to increase channel mobility, enhance the optical absorption for whole visible light and form uniform micro-structure, satisfying the desirable attributes essential for high performance transistor and visible light photo-sensors on large area platform. Here, we present electronic, optical and microstructural properties of ZnON, a composite of Zn3N2 and ZnO. Well-optimized ZnON material presents high mobility exceeding 100 cm2V−1s−1, the band-gap of 1.3 eV and nanocrystalline structure with multiphase. We found that mobility, microstructure, electronic structure, band-gap and trap properties of ZnON are varied with nitrogen concentration in ZnO. Accordingly, the performance of ZnON-based device can be adjustable to meet the requisite of both switch device and image-sensor potentials. These results demonstrate how device and material attributes of ZnON can be optimized for new device strategies in display technology and we expect the ZnON will be applicable to a wide range of imaging/display devices. PMID:24824778

Practical controller design for ultra-precision positioning of stages with a pneumatic artificial muscle actuator

NASA Astrophysics Data System (ADS)

Tang, T. F.; Chong, S. H.

2017-06-01

This paper presents a practical controller design method for ultra-precision positioning of pneumatic artificial muscle actuator stages. Pneumatic artificial muscle (PAM) actuators are safe to use and have numerous advantages which have brought these actuators to wide applications. However, PAM exhibits strong non-linear characteristics, and these limitations lead to low controllability and limit its application. In practice, the non-linear characteristics of PAM mechanism are difficult to be precisely modeled, and time consuming to model them accurately. The purpose of the present study is to clarify a practical controller design method that emphasizes a simple design procedure that does not acquire plants parameters modeling, and yet is able to demonstrate ultra-precision positioning performance for a PAM driven stage. The practical control approach adopts continuous motion nominal characteristic trajectory following (CM NCTF) control as the feedback controller. The constructed PAM driven stage is in low damping characteristic and causes severe residual vibration that deteriorates motion accuracy of the system. Therefore, the idea to increase the damping characteristic by having an acceleration feedback compensation to the plant has been proposed. The effectiveness of the proposed controller was verified experimentally and compared with a classical PI controller in point-to-point motion. The experiment results proved that the CM NCTF controller demonstrates better positioning performance in smaller motion error than the PI controller. Overall, the CM NCTF controller has successfully to reduce motion error to 3µm, which is 88.7% smaller than the PI controller.

Simulation studies of a wide area health care network.

PubMed Central

McDaniel, J. G.

1994-01-01

There is an increasing number of efforts to install wide area health care networks. Some of these networks are being built to support several applications over a wide user base consisting primarily of medical practices, hospitals, pharmacies, medical laboratories, payors, and suppliers. Although on-line, multi-media telecommunication is desirable for some purposes such as cardiac monitoring, store-and-forward messaging is adequate for many common, high-volume applications. Laboratory test results and payment claims, for example, can be distributed using electronic messaging networks. Several network prototypes have been constructed to determine the technical problems and to assess the effectiveness of electronic messaging in wide area health care networks. Our project, Health Link, developed prototype software that was able to use the public switched telephone network to exchange messages automatically, reliably and securely. The network could be configured to accommodate the many different traffic patterns and cost constraints of its users. Discrete event simulations were performed on several network models. Canonical star and mesh networks, that were composed of nodes operating at steady state under equal loads, were modeled. Both topologies were found to support the throughput of a generic wide area health care network. The mean message delivery time of the mesh network was found to be less than that of the star network. Further simulations were conducted for a realistic large-scale health care network consisting of 1,553 doctors, 26 hospitals, four medical labs, one provincial lab and one insurer. Two network topologies were investigated: one using predominantly peer-to-peer communication, the other using client-server communication.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:7949966

Maryland dental hygienists' knowledge, opinions and practices regarding dental caries prevention and early detection.

PubMed

Clovis, Joanne B; Horowitz, Alice M; Kleinman, Dushanka V; Wang, Min Qi; Massey, Meredith

2012-01-01

The purpose of this study was to assess Maryland dental hygienists' knowledge, practices and opinions regarding dental caries prevention and early detection. A 30 item survey was mailed to 1,258 Maryland dental hygienists. Two follow-up mailings and email reminders were sent. The response rate was 43% (n=540). Nearly all respondents were female (98%), and 58% practiced in solo settings. Knowledge and certainty of knowledge were moderate: sealants are needed regardless of topical fluoride use (55% certain, 40% less certain), newly erupted permanent molars are the best candidates for sealants (54%, 36%) and professionally applied fluorides are desirable in areas without fluoridated water (55%, 36%). Fewer were certain that incipient lesions can be remineralized before cavitation (23%, 69%), and dilute, frequently administered fluorides are more effective in caries prevention than concentrated, less frequently administered fluorides (6%, 24%). Opinions regarding effectiveness of protocols for 2 age groups from 6 months to 6 years, the challenges of early childhood caries (ECC), prevention practices regarding sealant and topical fluoride applications varied widely. Eighty-nine percent reported routinely assessing dental caries risk factors of child patients and 90% were interested in continuing education courses. There were no significant differences between different types of practice settings, year of graduation, race/ethnicity or gender. Knowledge of recommended guidelines for fluoride and sealant application support clinical decision-making and self-care counseling. Misinformation and lack of understanding of current research and recommendations identify a need for educational interventions in undergraduate dental hygiene programs and through continuing education for practicing hygienists.

Emergency ultrasound usage among recent emergency medicine residency graduates of a convenience sample of 14 residencies.

PubMed

Dean, Anthony J; Breyer, Michael J; Ku, Bon S; Mills, Angela M; Pines, Jesse M

2010-02-01

Emergency Medicine (EM) residency graduates are trained to perform Emergency Medicine bedside ultrasound (EMBU). However, the degree to which they use this skill in their practice after graduation is unknown. We sought to test the amount and type of usage of EMBU among recent residency graduates, and how usage and barriers vary among various types of EM practice settings. Graduates from 14 EM residency programs in 2003-2005 were surveyed on their current practice setting and use of EMBU. There were 252 (73%) graduates who completed the survey. Of the 73% of respondents reporting access to EMBU, 98% had used it within the past 3 months. Access to EMBU was higher in academic (97%) vs. community teaching (79%) vs. community non-teaching settings (62%) (p < 0.001), and in Emergency Departments (EDs) where yearly census exceeded 60,000 visits (87% vs. 65%, p < 0.001). Physicians in academic settings reported "high use" of EMBU more frequently than those in community settings for most modalities. FAST (focused assessment by sonography in trauma) was the most common high-use application and the most useful in practice. The greatest impediment to EMBU use was "not enough time" (61%). Ultrasound usage among recent EM residency graduates is significantly higher in teaching than in community settings and in high-volume EDs. Its use is more widespread than in previous reports in all types of practice. There is a wide range of utilization of ultrasound in the various applications in emergency practice, with the evaluation of trauma being the most common. Copyright (c) 2010 Elsevier Inc. All rights reserved.

Diuretics Prime Plant Immunity in Arabidopsis thaliana

PubMed Central

Noutoshi, Yoshiteru; Ikeda, Mika; Shirasu, Ken

2012-01-01

Plant activators are agrochemicals that activate the plant immune system, thereby enhancing disease resistance. Due to their prophylactic and durable effects on a wide spectrum of diseases, plant activators can provide synergistic crop protection when used in combination with traditional pest controls. Although plant activators have achieved great success in wet-rice farming practices in Asia, their use is still limited. To isolate novel plant activators applicable to other crops, we screened a chemical library using a method that can selectively identify immune-priming compounds. Here, we report the isolation and characterization of three diuretics, bumetanide, bendroflumethiazide and clopamide, as immune-priming compounds. These drugs upregulate the immunity-related cell death of Arabidopsis suspension-cultured cells induced with an avirulent strain of Pseudomonas syringae pv. tomato in a concentration-dependent manner. The application of these compounds to Arabidopsis plants confers disease resistance to not only the avirulent but also a virulent strain of the pathogen. Unlike salicylic acid, an endogenous phytohormone that governs disease resistance in response to biotrophic pathogens, the three diuretic compounds analyzed here do not induce PR1 or inhibit plant growth, showing potential as lead compounds in a practical application. PMID:23144763

Attempt at forming an expression of Manning's 'n' for Open Channel Flow

NASA Astrophysics Data System (ADS)

De, S. K.; Khosa, R.

2016-12-01

Study of open channel hydraulics finds application in diverse areas such as design of river banks, bridges and other structures. Principal hydraulic elements used in these applications include surface water profiles and flow velocity and these carry significant influences of fluid properties, channel properties and boundary conditions. As per current practice, friction influences are routinely captured in a single factor and commonly referred to as the roughness coefficient and amongst the most widely used equation of flow that uses the latter coefficient is the Manning's equation. As of now, selection of the Manning's roughness coefficient is made from existing tabulated data and accompanying pictures and, clearly as per these practices, the selection and choice of this coefficient is inevitably very subjective and a source of uncertainty in the application of transport models. In this study, an attempt has been made to develop a more rational and computationally feasible expression of the Manning's constant 'n' so that it partially or fully eliminates the need to refer to a table whenever performing a computation. The development of an equation of the Manning's constant uses the basic parameters of the flow and also consideration for influences such as vegetation and form roughness as well.

Hyperspectral Imaging of Forest Resources: The Malaysian Experience

NASA Astrophysics Data System (ADS)

Mohd Hasmadi, I.; Kamaruzaman, J.

2008-08-01

Remote sensing using satellite and aircraft images are well established technology. Remote sensing application of hyperspectral imaging, however, is relatively new to Malaysian forestry. Through a wide range of wavelengths hyperspectral data are precisely capable to capture narrow bands of spectra. Airborne sensors typically offer greatly enhanced spatial and spectral resolution over their satellite counterparts, and able to control experimental design closely during image acquisition. The first study using hyperspectral imaging for forest inventory in Malaysia were conducted by Professor Hj. Kamaruzaman from the Faculty of Forestry, Universiti Putra Malaysia in 2002 using the AISA sensor manufactured by Specim Ltd, Finland. The main objective has been to develop methods that are directly suited for practical tropical forestry application at the high level of accuracy. Forest inventory and tree classification including development of single spectral signatures have been the most important interest at the current practices. Experiences from the studies showed that retrieval of timber volume and tree discrimination using this system is well and some or rather is better than other remote sensing methods. This article reviews the research and application of airborne hyperspectral remote sensing for forest survey and assessment in Malaysia.

Examining Barriers to Sustained Implementation of School-Wide Prevention Practices

ERIC Educational Resources Information Center

Turri, Mary G.; Mercer, Sterett H.; McIntosh, Kent; Nese, Rhonda N. T.; Strickland-Cohen, M. Kathleen; Hoselton, Robert

2016-01-01

The purpose of this study was to determine if an experimental 5-item measure of barriers to implementing and sustaining school-wide prevention practices, the "Assessment of Barriers to Implementation and Sustainability in Schools" (ABISS), would relate to objective measures of school-wide positive behavioral interventions and supports…

Hierarchical Flowerlike Gold Nanoparticles Labeled Immunochromatography Test Strip for Highly Sensitive Detection of Escherichia coli O157:H7.

PubMed

Zhang, Lei; Huang, Youju; Wang, Jingyun; Rong, Yun; Lai, Weihua; Zhang, Jiawei; Chen, Tao

2015-05-19

Gold nanoparticles (AuNPs) labeled lateral-flow test strip immunoassay (LFTS) has been widely used in biomedical, feed/food, and environmental analysis fields. Conventional ILFS assay usually uses spherical AuNPs as labeled probes and shows low detection sensitivity, which further limits its widespread practical application. Unlike spherical AuNP used as labeled probe in conventional ILFS, in our present study, a hierarchical flowerlike AuNP specific probe was designed for LFTS and further used to detect Escherichia coli O157:H7 (E. coli O157:H7). Three types of hierarchical flowerlike AuNPs, such as tipped flowerlike, popcornlike, and large-sized flowerlike AuNPs were synthesized in a one-step method. Compared with other two kinds of Au particles, tipped flowerlike AuNPs probes for LFTS particularly exhibited highly sensitive detection of E. coli O157:H7. The remarkable improvement of detection sensitivity of tipped flowerlike AuNPs probes can be achieved even as low as 10(3) colony-forming units (CFU)/mL by taking advantages of its appropriate size and hierarchical structures, which is superior over the detection performance of conventional LFTS. Using this novel tipped flower AuNPs probes, quantitative detection of E. coli O157:H7 can be obtained partially in a wide concentration range with good repeatability. This hierarchical tipped flower-shaped AuNPs probe for LFTS is promising for the practical applications in widespread analysis fields.

Developing a Scenario for widespread use: Best practices, lessons learned

USGS Publications Warehouse

Perry, S.; Jones, L.; Cox, D.

2011-01-01

The ShakeOut Scenario is probably the most widely known and used earthquake scenario created to date. Much of the credit for its widespread dissemination and application lies with scenario development criteria that focused on the needs and involvement of end users and with a suite of products that tailored communication of the results to varied end users, who ranged from emergency managers to the general public, from corporations to grassroots organizations. Products were most effective when they were highly visual, when they emphasized the findings of social scientists, and when they communicated the experience of living through the earthquake. This paper summarizes the development criteria and the products that made the ShakeOut Scenario so widely known and used, and it provides some suggestions for future improvements. ?? 2011, Earthquake Engineering Research Institute.

Even free radicals should follow some rules: a guide to free radical research terminology and methodology.

PubMed

Forman, Henry Jay; Augusto, Ohara; Brigelius-Flohe, Regina; Dennery, Phyllis A; Kalyanaraman, Balaraman; Ischiropoulos, Harry; Mann, Giovanni E; Radi, Rafael; Roberts, L Jackson; Vina, Jose; Davies, Kelvin J A

2015-01-01

Free radicals and oxidants are now implicated in physiological responses and in several diseases. Given the wide range of expertise of free radical researchers, application of the greater understanding of chemistry has not been uniformly applied to biological studies. We suggest that some widely used methodologies and terminologies hamper progress and need to be addressed. We make the case for abandonment and judicious use of several methods and terms and suggest practical and viable alternatives. These changes are suggested in four areas: use of fluorescent dyes to identify and quantify reactive species, methods for measurement of lipid peroxidation in complex biological systems, claims of antioxidants as radical scavengers, and use of the terms for reactive species. Copyright © 2014 Elsevier Inc. All rights reserved.

From micro to nano contacts in biological attachment devices

PubMed Central

Arzt, Eduard; Gorb, Stanislav; Spolenak, Ralph

2003-01-01

Animals with widely varying body weight, such as flies, spiders, and geckos, can adhere to and move along vertical walls and even ceilings. This ability is caused by very efficient attachment mechanisms in which patterned surface structures interact with the profile of the substrate. An extensive microscopic study has shown a strong inverse scaling effect in these attachment devices. Whereas μm dimensions of the terminal elements of the setae are sufficient for flies and beetles, geckos must resort to sub-μm devices to ensure adhesion. This general trend is quantitatively explained by applying the principles of contact mechanics, according to which splitting up the contact into finer subcontacts increases adhesion. This principle is widely spread in design of natural adhesive systems and may also be transferred into practical applications. PMID:12960386

Wideband dual frequency modified ellipse shaped patch antenna for WLAN/Wi-MAX/UWB application

NASA Astrophysics Data System (ADS)

Jain, P. K.; Jangid, K. G.; R. Sharma, B.; Saxena, V. K.; Bhatnagar, D.

2018-05-01

This paper communicates the design and performance of microstrip line fed modified ellipses shaped radiating patch with defected ground structure. Wide impedance bandwidth performance is achieved by applying a pentagonal slot and T slot structure in ground plane. By inserting two semi ellipses shaped ring in ground, we obtained axial ratio bandwidth approx 600 MHz. The proposed antenna is simulated by utilizing CST Microwave Studio simulator 2014. This antenna furnishes wide impedance bandwidth approx. 4.23 GHz, which has spread into two bands 2.45 GHz - 5.73 GHz and 7.22 GHz - 8.17 GHz with nearly flat gain in operating frequency range. This antenna may be proved as a practicable structure for modern wireless communication systems including Wi-MAX, WLAN and lower band of UWB.

Mapping ergonomics application to improve SMEs working condition in industrially developing countries: a critical review.

PubMed

Hermawati, Setia; Lawson, Glyn; Sutarto, Auditya Purwandini

2014-01-01

In industrially developing countries (IDC), small and medium enterprises (SMEs) account for the highest proprotion of employment. Unfortunately, the working conditions in SMEs are often very poor and expose employees to a potentially wide range of health and safety risks. This paper presents a comprehensive review of 161 articles related to ergonomics application in SMEs, using Indonesia as a case study. The aim of this paper is to investigate the extent of ergonomics application and identify areas that can be improved to promote effective ergonomics for SMEs in IDC. The most urgent issue found is the need for adopting participatory approach in contrast to the commonly implemented top-down approach. Some good practices in ergonomics application were also revealed from the review, e.g. a multidisciplinary approach, unsophisticated and low-cost solutions, and recognising the importance of productivity. The review also found that more work is still required to achieve appropriate cross-cultural adaptation of ergonomics application.

A survey of GPU-based medical image computing techniques

PubMed Central

Shi, Lin; Liu, Wen; Zhang, Heye; Xie, Yongming

2012-01-01

Medical imaging currently plays a crucial role throughout the entire clinical applications from medical scientific research to diagnostics and treatment planning. However, medical imaging procedures are often computationally demanding due to the large three-dimensional (3D) medical datasets to process in practical clinical applications. With the rapidly enhancing performances of graphics processors, improved programming support, and excellent price-to-performance ratio, the graphics processing unit (GPU) has emerged as a competitive parallel computing platform for computationally expensive and demanding tasks in a wide range of medical image applications. The major purpose of this survey is to provide a comprehensive reference source for the starters or researchers involved in GPU-based medical image processing. Within this survey, the continuous advancement of GPU computing is reviewed and the existing traditional applications in three areas of medical image processing, namely, segmentation, registration and visualization, are surveyed. The potential advantages and associated challenges of current GPU-based medical imaging are also discussed to inspire future applications in medicine. PMID:23256080

The development of nickel-metal hydride technology for use in aerospace applications

NASA Technical Reports Server (NTRS)

Rampel, Guy; Johnson, Herschel; Dell, Dan; Wu, Tony; Puglisi, Vince

1992-01-01

The nickel metal hydride technology for battery application is relatively immature even though this technology was made widely known by Philips' scientists as long ago as 1970. Recently, because of the international environmental regulatory pressures being placed on cadmium in the workplace and in disposal practices, battery companies have initiated extensive development programs to make this technology a viable commercial operation. These hydrides do not pose a toxilogical threat as does cadmium. Also, they provide a higher energy density and specific energy when compared to the other nickel based battery technologies. For these reasons, the nickel metal hydride electrochemisty is being evaluated as the next power source for varied applications such as laptop computers, cellular telephones, electric vehicles, and satellites. A parallel development effort is under way to look at aerospace applications for nickel metal hydride cells. This effort is focused on life testing of small wound cells of the commercial type to validate design options and development of prismatic design cells for aerospace applications.

Digital simulation of an arbitrary stationary stochastic process by spectral representation.

PubMed

Yura, Harold T; Hanson, Steen G

2011-04-01

In this paper we present a straightforward, efficient, and computationally fast method for creating a large number of discrete samples with an arbitrary given probability density function and a specified spectral content. The method relies on initially transforming a white noise sample set of random Gaussian distributed numbers into a corresponding set with the desired spectral distribution, after which this colored Gaussian probability distribution is transformed via an inverse transform into the desired probability distribution. In contrast to previous work, where the analyses were limited to auto regressive and or iterative techniques to obtain satisfactory results, we find that a single application of the inverse transform method yields satisfactory results for a wide class of arbitrary probability distributions. Although a single application of the inverse transform technique does not conserve the power spectra exactly, it yields highly accurate numerical results for a wide range of probability distributions and target power spectra that are sufficient for system simulation purposes and can thus be regarded as an accurate engineering approximation, which can be used for wide range of practical applications. A sufficiency condition is presented regarding the range of parameter values where a single application of the inverse transform method yields satisfactory agreement between the simulated and target power spectra, and a series of examples relevant for the optics community are presented and discussed. Outside this parameter range the agreement gracefully degrades but does not distort in shape. Although we demonstrate the method here focusing on stationary random processes, we see no reason why the method could not be extended to simulate non-stationary random processes. © 2011 Optical Society of America

Research Guidelines in the Era of Large-scale Collaborations: An Analysis of Genome-wide Association Study Consortia

PubMed Central

Austin, Melissa A.; Hair, Marilyn S.; Fullerton, Stephanie M.

2012-01-01

Scientific research has shifted from studies conducted by single investigators to the creation of large consortia. Genetic epidemiologists, for example, now collaborate extensively for genome-wide association studies (GWAS). The effect has been a stream of confirmed disease-gene associations. However, effects on human subjects oversight, data-sharing, publication and authorship practices, research organization and productivity, and intellectual property remain to be examined. The aim of this analysis was to identify all research consortia that had published the results of a GWAS analysis since 2005, characterize them, determine which have publicly accessible guidelines for research practices, and summarize the policies in these guidelines. A review of the National Human Genome Research Institute’s Catalog of Published Genome-Wide Association Studies identified 55 GWAS consortia as of April 1, 2011. These consortia were comprised of individual investigators, research centers, studies, or other consortia and studied 48 different diseases or traits. Only 14 (25%) were found to have publicly accessible research guidelines on consortia websites. The available guidelines provide information on organization, governance, and research protocols; half address institutional review board approval. Details of publication, authorship, data-sharing, and intellectual property vary considerably. Wider access to consortia guidelines is needed to establish appropriate research standards with broad applicability to emerging forms of large-scale collaboration. PMID:22491085

Thermal conductivity of silver loaded conductive epoxy from cryogenic to ambient temperature and its application for precision cryogenic noise measurements

NASA Astrophysics Data System (ADS)

Amils, Ricardo I.; Gallego, Juan Daniel; Sebastián, José Luis; Muñoz, Sagrario; Martín, Agustín; Leuther, Arnulf

2016-06-01

The pressure to increase the sensitivity of instrumentation has pushed the use of cryogenic Low Noise Amplifier (LNA) technology into a growing number of fields. These areas range from radio astronomy and deep space communications to fundamental physics. In this context manufacturing for cryogenic environments requires a proper thermal knowledge of the materials to be able to achieve adequate design behavior. In this work, we present experimental measurements of the thermal conductivity of a silver filled conductive epoxy (EPO-TEK H20E) which is widely used in cryogenic electronics applications. The characterization has been made using a sample preparation which mimics the practical use of this adhesive in the fabrication of cryogenic devices. We apply the data obtained to a detailed analysis of the effects of the conductive epoxy in a monolithic thermal noise source used for high accuracy cryogenic microwave noise measurements. In this application the epoxy plays a fundamental role since its limited thermal conductivity allows heating the chip with relatively low power. To our knowledge, the cryogenic thermal conductivity data of this epoxy has not been reported before in the literature in the 4-300 K temperature range. A second non-conductive epoxy (Gray Scotch-Weld 2216 B/A), also widely used in cryogenic applications, has been measured in order to validate the method by comparing with previous published data.

Recent advances in functionalized micro and mesoporous carbon materials: synthesis and applications.

PubMed

Benzigar, Mercy R; Talapaneni, Siddulu Naidu; Joseph, Stalin; Ramadass, Kavitha; Singh, Gurwinder; Scaranto, Jessica; Ravon, Ugo; Al-Bahily, Khalid; Vinu, Ajayan

2018-04-23

Functionalized nanoporous carbon materials have attracted the colossal interest of the materials science fraternity owing to their intriguing physical and chemical properties including a well-ordered porous structure, exemplary high specific surface areas, electronic and ionic conductivity, excellent accessibility to active sites, and enhanced mass transport and diffusion. These properties make them a special and unique choice for various applications in divergent fields such as energy storage batteries, supercapacitors, energy conversion fuel cells, adsorption/separation of bulky molecules, heterogeneous catalysts, catalyst supports, photocatalysis, carbon capture, gas storage, biomolecule detection, vapour sensing and drug delivery. Because of the anisotropic and synergistic effects arising from the heteroatom doping at the nanoscale, these novel materials show high potential especially in electrochemical applications such as batteries, supercapacitors and electrocatalysts for fuel cell applications and water electrolysis. In order to gain the optimal benefit, it is necessary to implement tailor made functionalities in the porous carbon surfaces as well as in the carbon skeleton through the comprehensive experimentation. These most appealing nanoporous carbon materials can be synthesized through the carbonization of high carbon containing molecular precursors by using soft or hard templating or non-templating pathways. This review encompasses the approaches and the wide range of methodologies that have been employed over the last five years in the preparation and functionalisation of nanoporous carbon materials via incorporation of metals, non-metal heteroatoms, multiple heteroatoms, and various surface functional groups that mostly dictate their place in a wide range of practical applications.

Investigating School-Wide Antecedents of Good Practice Dissemination from Individual Subject Projects

ERIC Educational Resources Information Center

Christophersen, Knut-Andreas; Elstad, Eyvind; Turmo, Are

2012-01-01

Good practice dissemination is an unsolved problem in education. This article describes how clear and "soft" leadership and perceptions of social and economic exchange operate in the bottom-up processes of school reforms and examines the relative impact of these factors on school-wide good practice dissemination and discusses how…

Practical Considerations in Creating School-Wide Positive Behavior Support in Public Schools

ERIC Educational Resources Information Center

Handler, Marcie W.; Rey, Jannette; Connell, James; Thier, Kimberly; Feinberg, Adam; Putnam, Robert

2007-01-01

School-wide positive behavior support (SWPBS) has been identified as an effective and efficient method to teach students prosocial skills. It requires both effective behavior support practices and systems that will support these changes, including data-based decision making among the school leadership team. There are many practical and systemic…

Radiometry with nighttime DMSP images in digital form. [satellite earth observations

NASA Technical Reports Server (NTRS)

Croft, T. A.

1981-01-01

The USAF Defense Meteorological Satellite Program (DMSP) spacecraft sends images to earth in the form of numbers. It has been common practice to erase the only digital records, the magnetic tapes, for reuse, after films (resembling photographs) have been created from the numbers. While the DMSP images have been widely used, their application in research has been hindered by both the lack of digital data and the lack of an authoritative source of related technical information. The character of the digital form is considered. Each image is essentially a three-dimensional list (X,Y,Z) in which X and Y represent the position coordinates of a pixel and Z is its associated radiance. Only the value of Z is given and the X-Y position must be deduced from adjunct information. Each original scan composed of 1464 pixels represents an area on the earth's surface about 3 km wide and 3000 km long. Strengths and weaknesses of the system with respect to research applications are considered, and concepts for the design of a nocturnal imager are discussed.

Grading Practices and Distributions Across Internal Medicine Clerkships.

PubMed

Fazio, Sara B; Torre, Dario M; DeFer, Thomas M

2016-01-01

Clerkship evaluation and grading practices vary widely between U.S. medical schools. Grade inflation continues to exist, and grade distribution is likely to be different among U.S. medical schools. Increasing the number of available grades curtails "grade inflation." A national survey of all Clerkship Directors in Internal Medicine members was administered in 2011. The authors assessed key aspects of grading. Response rate was 76%. Among clerkship directors (CDs), 61% of respondents agreed that grade inflation existed in the internal medicine clerkship at their school, and 43% believed that it helped students obtain better residency positions. With respect to grading practices, 79% of CDs define specific behaviors needed to achieve each grade, and 36% specify an ideal grade distribution. In addition, 44% have a trained core faculty responsible for evaluating students, 35% describe formal grading meetings, and 39% use the Reporter-Interpreter-Manager-Educator (RIME) scheme. Grading scales were described as follows: 4% utilize a pass/fail system, 13% a 3-tier (e.g., Honors/Pass/Fail), 45% 4-tier, 35% 5-tier, and 4% 6+-tier system. There was a trend to higher grades with more tiers available. Grade inflation continues in the internal medicine clerkship. Almost half of CDs feel that this practice assists students to obtain better residency positions. A minority of programs have a trained core faculty who are responsible for evaluation. About one third have formal grading meetings and use the RIME system; both have been associated with more robust and balanced grading practices. In particular, there is a wide variation between schools in the percentage of students who are awarded the highest grade, which has implications for residency applications. Downstream users of clinical clerkship grades must be fully aware of these variations in grading in order to appropriately judge medical student performance.

Building a Unit-Level Mentored Program to Sustain a Culture of Inquiry for Evidence-Based Practice.

PubMed

Breckenridge-Sproat, Sara T; Throop, Meryia D; Raju, Dheeraj; Murphy, Deborah A; Loan, Lori A; Patrician, Patricia A

2015-01-01

This study tested the effectiveness of a dynamic educational and mentoring program, facilitated by unit-level mentors, to introduce, promote, and sustain an evidence-based practice (EBP) culture among nurses in a military healthcare setting. The need to identify gaps in practice, apply principles of EBP, and advance scientific applications in the pursuit of quality nursing care is as important to military healthcare as it is in the civilian sector. The Advancing Research through Close Collaboration Model guided the intervention and study. Three instruments were used: the Organizational Readiness for System-wide Integration of Evidence-Based Practice, EBP Beliefs, and EBP Implementation scales. The study took place in 3 military hospitals simultaneously undergoing facility and staff integration. Data were collected from staff nurses in the inpatient nursing units before and after a facilitated education and mentoring intervention. Three hundred sixty nurses (38%) completed baseline, and 325 (31%) completed follow-up surveys. Scores improved on all 3 measures following implementation of the program; however, the differences were statistically significant only for the Organizational Readiness for System-wide Integration of Evidence-Based Practice scale (70.96 vs 77.63, t = -3.95, P < .01). In the paired individual pretest/posttest subsample (n = 56), scores improved significantly on all 3 instruments. Despite typically high turnover rates of military personnel and restructuring of 3 facilities during the study period, the readiness for, beliefs about, and implementation of EBP improved. This study suggests that a commitment to an EBP culture may diffuse among individuals in an organization, even while experiencing significant change. It also demonstrates that a unit-level mentored EBP program is sustainable despite changes in organizational structure and workforce composition.

BLISS is a versatile and quantitative method for genome-wide profiling of DNA double-strand breaks.

PubMed

Yan, Winston X; Mirzazadeh, Reza; Garnerone, Silvano; Scott, David; Schneider, Martin W; Kallas, Tomasz; Custodio, Joaquin; Wernersson, Erik; Li, Yinqing; Gao, Linyi; Federova, Yana; Zetsche, Bernd; Zhang, Feng; Bienko, Magda; Crosetto, Nicola

2017-05-12

Precisely measuring the location and frequency of DNA double-strand breaks (DSBs) along the genome is instrumental to understanding genomic fragility, but current methods are limited in versatility, sensitivity or practicality. Here we present Breaks Labeling In Situ and Sequencing (BLISS), featuring the following: (1) direct labelling of DSBs in fixed cells or tissue sections on a solid surface; (2) low-input requirement by linear amplification of tagged DSBs by in vitro transcription; (3) quantification of DSBs through unique molecular identifiers; and (4) easy scalability and multiplexing. We apply BLISS to profile endogenous and exogenous DSBs in low-input samples of cancer cells, embryonic stem cells and liver tissue. We demonstrate the sensitivity of BLISS by assessing the genome-wide off-target activity of two CRISPR-associated RNA-guided endonucleases, Cas9 and Cpf1, observing that Cpf1 has higher specificity than Cas9. Our results establish BLISS as a versatile, sensitive and efficient method for genome-wide DSB mapping in many applications.

Optically controlled dielectric properties of single-walled carbon nanotubes for terahertz wave applications.

PubMed

Smirnov, Serguei; Anoshkin, Ilya V; Demchenko, Petr; Gomon, Daniel; Lioubtchenko, Dmitri V; Khodzitsky, Mikhail; Oberhammer, Joachim

2018-06-21

Materials with tunable dielectric properties are valuable for a wide range of electronic devices, but are often lossy at terahertz frequencies. Here we experimentally report the tuning of the dielectric properties of single-walled carbon nanotubes under light illumination. The effect is demonstrated by measurements of impedance variations at low frequency as well as complex dielectric constant variations in the wide frequency range of 0.1-1 THz by time domain spectroscopy. We show that the dielectric constant is significantly modified for varying light intensities. The effect is also practically applied to phase shifters based on dielectric rod waveguides, loaded with carbon nanotube layers. The carbon nanotubes are used as tunable impedance surface controlled by light illumination, in the frequency range of 75-500 GHz. These results suggest that the effect of dielectric constant tuning with light, accompanied by low transmission losses of the carbon nanotube layer in such an ultra-wide band, may open up new directions for the design and fabrication of novel Terahertz and optoelectronic devices.

[HyperPsych--resources for medicine and psychology on the World Wide Web].

PubMed

Laszig, P

1997-07-01

Progress in the research of interactive communication technology and the acceleration of processing and transmitting information have promoted the development of computer networks allowing global access to scientific information and services. The recently most well-known net is the internet. Based on its integrative structure as a communication-directed as well as an information-directed medium, the internet helps researchers design scientific research. Especially medicine and psychology as information-dependent scientific disciplines may profit by using this technological offer. As a method to coordinate to the vast amount of medical and psychological data around the globe and to communicate with researchers world-wide, it enhances innovative possibilities for research, diagnosis and therapy. Currently, the World Wide Web is regarded as the most user-friendly and practical of all the internet resources. Based on a systematic introduction to the applications of the WWW, this article discusses relevant resources, points out possibilities and limits of network-supported scientific research and proposes many uses of this new medium.

Current Approaches and Clinician Attitudes to the Use of Cerebrospinal Fluid Biomarkers in Diagnostic Evaluation of Dementia in Europe.

PubMed

Miller, Anne-Marie; Balasa, Mircea; Blennow, Kaj; Gardiner, Mary; Rutkowska, Aleksandra; Scheltens, Philip; Teunissen, Charlotte E; Visser, Pieter Jelle; Winblad, Bengt; Waldemar, Gunhild; Lawlor, Brian

2017-01-01

BIOMARKAPD seeks to diminish the barriers associated with the clinical use of cerebrospinal fluid (CSF) biomarker analysis by reducing variation in CSF laboratory methodologies and generating consensus recommendations on their clinical interpretation and application for dementia diagnosis. To examine the disparity in practitioner attitudes and clinical practice relating to the use of CSF biomarkers for dementia diagnosis across Europe. Clinical dementia experts were surveyed on the prevalence of national consensus guidelines and analytical reimbursement across Europe, their biomarker platform preferences, lumbar puncture methodologies and application of reference values and cut-offs for CSF analysis. 74% of respondents (total n = 51) use CSF biomarkers in clinical practice and 69% perform lumbar punctures on an outpatient basis. Most use CSF biomarkers to diagnose atypical (84%) and early-onset cases of cognitive impairment (71%) and for the differential diagnosis of other dementias (69%). 82% state they are sufficiently informed about CSF biomarkers yet 61% report a lack of national consensus guidelines on their use for dementia diagnosis. 48% of countries represented do not reimburse clinical CSF analysis costs. 43% report using normal reference ranges derived from publications. Variations in attitude and practice relating to CSF biomarkers, widely recognised as barriers to their clinical acceptance, remain evident within and between countries across Europe, even in expert centres. These shortcomings must be addressed by developing consensus guidelines on CSF-related methodologies and their clinical application, to further their use for the diagnostic evaluation of dementia.

A Mouse Geneticist’s Practical Guide to CRISPR Applications

PubMed Central

Singh, Priti; Schimenti, John C.; Bolcun-Filas, Ewelina

2015-01-01

CRISPR/Cas9 system of RNA-guided genome editing is revolutionizing genetics research in a wide spectrum of organisms. Even for the laboratory mouse, a model that has thrived under the benefits of embryonic stem (ES) cell knockout capabilities for nearly three decades, CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats)/Cas9 technology enables one to manipulate the genome with unprecedented simplicity and speed. It allows generation of null, conditional, precisely mutated, reporter, or tagged alleles in mice. Moreover, it holds promise for other applications beyond genome editing. The crux of this system is the efficient and targeted introduction of DNA breaks that are repaired by any of several pathways in a predictable but not entirely controllable manner. Thus, further optimizations and improvements are being developed. Here, we summarize current applications and provide a practical guide to use the CRISPR/Cas9 system for mouse mutagenesis, based on published reports and our own experiences. We discuss critical points and suggest technical improvements to increase efficiency of RNA-guided genome editing in mouse embryos and address practical problems such as mosaicism in founders, which complicates genotyping and phenotyping. We describe a next-generation sequencing strategy for simultaneous characterization of on- and off-target editing in mice derived from multiple CRISPR experiments. Additionally, we report evidence that elevated frequency of precise, homology-directed editing can be achieved by transient inhibition of the Ligase IV-dependent nonhomologous end-joining pathway in one-celled mouse embryos. PMID:25271304

Scalable, full-colour and controllable chromotropic plasmonic printing

PubMed Central

Xue, Jiancai; Zhou, Zhang-Kai; Wei, Zhiqiang; Su, Rongbin; Lai, Juan; Li, Juntao; Li, Chao; Zhang, Tengwei; Wang, Xue-Hua

2015-01-01

Plasmonic colour printing has drawn wide attention as a promising candidate for the next-generation colour-printing technology. However, an efficient approach to realize full colour and scalable fabrication is still lacking, which prevents plasmonic colour printing from practical applications. Here we present a scalable and full-colour plasmonic printing approach by combining conjugate twin-phase modulation with a plasmonic broadband absorber. More importantly, our approach also demonstrates controllable chromotropic capability, that is, the ability of reversible colour transformations. This chromotropic capability affords enormous potentials in building functionalized prints for anticounterfeiting, special label, and high-density data encryption storage. With such excellent performances in functional colour applications, this colour-printing approach could pave the way for plasmonic colour printing in real-world commercial utilization. PMID:26567803

Rapid Prototyping Technologies for Manufacturing and Maintenance Activities

NASA Astrophysics Data System (ADS)

Pfeifer, Marcel Rolf

2017-12-01

The paper deals with the direct application of Rapid Prototyping technologies for parts and spare parts production in production companies and the economic effect by making use of this technology. Traditional production technologies are technologies such as forging, cutting, machining, etc. These technologies are widely accepted and the teething troubles are solved. Rapid Prototyping technologies such as 3D printing on the other hand came into the focus in the recent years when the technologies and the produced quality gradually advanced. Providing flexibility and time efficiency the technology should also have a practical application in production. This paper has the aim to provide a case-study based on existing cost figures to show that these technologies are not limited to prototype developments.

Local Positioning Systems in (Game) Sports

PubMed Central

Leser, Roland; Baca, Arnold; Ogris, Georg

2011-01-01

Position data of players and athletes are widely used in sports performance analysis for measuring the amounts of physical activities as well as for tactical assessments in game sports. However, positioning sensing systems are applied in sports as tools to gain objective information of sports behavior rather than as components of intelligent spaces (IS). The paper outlines the idea of IS for the sports context with special focus to game sports and how intelligent sports feedback systems can benefit from IS. Henceforth, the most common location sensing techniques used in sports and their practical application are reviewed, as location is among the most important enabling techniques for IS. Furthermore, the article exemplifies the idea of IS in sports on two applications. PMID:22163725

Scalable, full-colour and controllable chromotropic plasmonic printing.

PubMed

Xue, Jiancai; Zhou, Zhang-Kai; Wei, Zhiqiang; Su, Rongbin; Lai, Juan; Li, Juntao; Li, Chao; Zhang, Tengwei; Wang, Xue-Hua

2015-11-16

Plasmonic colour printing has drawn wide attention as a promising candidate for the next-generation colour-printing technology. However, an efficient approach to realize full colour and scalable fabrication is still lacking, which prevents plasmonic colour printing from practical applications. Here we present a scalable and full-colour plasmonic printing approach by combining conjugate twin-phase modulation with a plasmonic broadband absorber. More importantly, our approach also demonstrates controllable chromotropic capability, that is, the ability of reversible colour transformations. This chromotropic capability affords enormous potentials in building functionalized prints for anticounterfeiting, special label, and high-density data encryption storage. With such excellent performances in functional colour applications, this colour-printing approach could pave the way for plasmonic colour printing in real-world commercial utilization.

Preparation and biocompatibility of a chitin nanofiber/gelatin composite film.

PubMed

Ogawa, Yoko; Azuma, Kazuo; Izawa, Hironori; Morimoto, Minoru; Ochi, Kosuke; Osaki, Tomohiro; Ito, Norihiko; Okamoto, Yoshiharu; Saimoto, Hiroyuki; Ifuku, Shinsuke

2017-11-01

The development of chitin-based materials with favorable mechanical properties and biocompatibility is an important research goal owing to the wide-ranging practical applications. In this study, a composite film was prepared using chitin nanofibers and gelatin. The CNF/gelatin composite film was highly viscous and had a fine nanofiber structure. The transmittances indicated high transparency, regardless of nanofiber content. The water content of the CNF/gelatin composite film increased linearly as the gelatin content increased. Although the CNF/gelatin composite film did not induce severe inflammation, it strongly induced fibroblast proliferation, indicating high biocompatibility. Based on these results, the films are suitable for biological applications, e.g., tissue engineering, medicines, and cosmetics. Copyright © 2017 Elsevier B.V. All rights reserved.

Polymer Stabilization of Liquid-Crystal Blue Phase II toward Photonic Crystals.

PubMed

Jo, Seong-Yong; Jeon, Sung-Wook; Kim, Byeong-Cheon; Bae, Jae-Hyun; Araoka, Fumito; Choi, Suk-Won

2017-03-15

The temperature ranges where a pure simple-cubic blue phase (BPII) emerges are quite narrow compared to the body-centered-cubic BP (BPI) such that the polymer stabilization of BPII is much more difficult. Hence, a polymer-stabilized BPII possessing a wide temperature range has been scarcely reported. Here, we fabricate a polymer-stabilized BPII over a temperature range of 50 °C including room temperature. The fabricated polymer-stabilized BPII is confirmed via polarized optical microscopy, Bragg reflection, and Kossel diagram observations. Furthermore, we demonstrate reflective BP liquid-crystal devices utilizing the reflectance-voltage performance as a potential application of the polymer-stabilized BPII. Our work demonstrates the possibility of practical application of the polymer-stabilized BPII to photonic crystals.

Applications of KPFM-Based Approaches for Surface Potential and Electrochemical Measurements in Liquid

DOE Office of Scientific and Technical Information (OSTI.GOV)

Collins, Liam F.; Weber, Stefan A. L.; Rodriguez, Brian

Kelvin probe force microscopy (KPFM) has been widely used to map nanoscale surface potentials of materials in ambient and ultra-high vacuum environments. However, to study and ultimately understand charge-related processes, e.g., in biological systems or to further improve energy storage devices such as electrochemical batteries, nanoscale surface potential measurements in liquid environments are required. Here, we describe the various implementations of KPFM-based approaches for measuring surface potentials in liquid environments. We provide practical guidelines for surface potential measurements and describe what other information can be obtained. Finally, we discuss potential applications and limitations of existing approaches and present possible solutionsmore » for the successful implementation of liquid KPFM.« less

Application of Advanced Materials Protecting from Influence of Free Space Environment

NASA Astrophysics Data System (ADS)

Dotsenko, Oleg; Shovkoplyas, Yuriy

2016-07-01

High cost and low availability of the components certified for use in the space environment forces satellite designers to using industrial and even commercial items. Risks associated with insufficient knowledge about behavior of these components in radiation environment are parried, mainly, by careful radiating designing of a satellite where application of special protective materials with improved space radiation shielding characteristics is one of the most widely used practices. Another advantage of protective materials application appears when a satellite designer needs using equipment in more severe space environment conditions then it has been provided at the equipment development. In such cases only expensive repeated qualification of the equipment hardness can be alternative to protective materials application. But mostly this way is unacceptable for satellite developers, being within strong financial and temporal restrictions. To apply protective materials effectively, the developer should have possibility to answer the question: "Where inside a satellite shall I place these materials and what shall be their shape to meet the requirements on space radiation hardness with minimal mass and volume expenses?" At that, the minimum set of requirements on space radiation hardness include: ionizing dose, nonionizing dose, single events, and internal charging. The standard calculative models and experimental techniques, now in use for space radiation hardness assurance of a satellite are unsuitable for the problem solving in such formulation. The sector analysis methodology, widely used in satellite radiating designing, is applicable only for aluminium shielding and doesn't allow taking into account advantages of protective materials. The programs simulating transport of space radiations through a substance with the use of Monte-Carlo technique, such as GEANT4, FLUKA, HZETRN and others, are fully applicable in view of their capabilities; but time required for calculations with use of these tools makes their utilization extremely problematic in the engineering practice. The calculative and experimental technique developed by the authors allows estimation of ionizing dose, nonionizing dose, single events, and internal charging of solar and trapped electron and proton radiations at the requested points inside a satellite when the special protective materials have been applied. The results of developed technique application are in satisfactory agreement with the results achieved with the help of the standard calculative models.

Fragment-based design of kinase inhibitors: a practical guide.

PubMed

Erickson, Jon A

2015-01-01

Fragment-based drug design has become an important strategy for drug design and development over the last decade. It has been used with particular success in the development of kinase inhibitors, which are one of the most widely explored classes of drug targets today. The application of fragment-based methods to discovering and optimizing kinase inhibitors can be a complicated and daunting task; however, a general process has emerged that has been highly fruitful. Here a practical outline of the fragment process used in kinase inhibitor design and development is laid out with specific examples. A guide to the overall process from initial discovery through fragment screening, including the difficulties in detection, to the computational methods available for use in optimization of the discovered fragments is reported.

Heterotic computing: exploiting hybrid computational devices.

PubMed

Kendon, Viv; Sebald, Angelika; Stepney, Susan

2015-07-28

Current computational theory deals almost exclusively with single models: classical, neural, analogue, quantum, etc. In practice, researchers use ad hoc combinations, realizing only recently that they can be fundamentally more powerful than the individual parts. A Theo Murphy meeting brought together theorists and practitioners of various types of computing, to engage in combining the individual strengths to produce powerful new heterotic devices. 'Heterotic computing' is defined as a combination of two or more computational systems such that they provide an advantage over either substrate used separately. This post-meeting collection of articles provides a wide-ranging survey of the state of the art in diverse computational paradigms, together with reflections on their future combination into powerful and practical applications. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Revalidation and electronic cataract surgery audit: a Scottish survey on current practice and opinion.

PubMed

Megaw, R; Rane-Malcolm, T; Brannan, S; Smith, R; Sanders, R

2011-11-01

To determine current knowledge and opinion on revalidation, and methods of cataract surgery audit in Scotland and to outline the current and future possibilities for electronic cataract surgery audit. In 2010 we conducted a prospective, cross-sectional, Scottish-wide survey on revalidation knowledge and opinion, and cataract audit practice among all senior NHS ophthalmologists. Results were anonymised and recorded manually for analysis. In all, 61% of the ophthalmologists surveyed took part. Only 33% felt ready to take part in revalidation, whereas 76% felt they did not have adequate information about the process. Also, 71% did not feel revalidation would improve patient care, but 85% agreed that cataract surgery audit is essential for ophthalmic practice. In addition, 91% audit their cataract outcomes; 52% do so continuously. Further, 63% audit their subspecialist surgical results. Only 25% audit their cataract surgery practice electronically, and only 12% collect clinical data using a hospital PAS system. Funding and system incompatibility were the main reasons cited for the lack of electronic audit setup. Currently, eight separate hospital IT patient administration systems are used across 14 health boards in Scotland. Revalidation is set to commence in 2012. The Royal College of Ophthalmologists will use cataract outcome audit as a tool to ensure surgical competency for the process. Retrospective manual auditing of cataract outcome is time consuming, and can be avoided with an electronic system. Scottish ophthalmologists view revalidation with scepticism and appear to have inadequate knowledge of the process. However, they strongly agree with the concept of cataract surgery audit. The existing and future electronic applications that may support surgical audit are commercial electronic records, web-based applications, centrally funded software applications, and robust NHS connections between community and hospital.

Current and long-term technologies of laser therapy

NASA Astrophysics Data System (ADS)

Ulashcyk, Vladimir S.; Volotovskaya, Anna V.

2007-06-01

Laser therapy, using low-energy laser radiation, is being more and more applied. The most applied technology is transcutaneous radiation of tissues by laser radiation. Originally, a direct action on a pathological site was mostly used, but recently more attention is given to reflexogenic areas, acupuncture points, and endocrine organ projection sites. The development of light-conductive engineering made it possible to practically apply intraorgan laser therapy. This technology is widely spread in gynecology, otorhinolaryngology, urology, gastroenterology, etc. Close to it are different versions of intratissue laser therapy (intraosteal, periosteal, myofascial). A special kind of laser therapy is laser hemotherapy. Depending on the techniques and protocol of its application, there are extracorporeal, intravascular, and supravenous ways of action. According to our comparative investigations, supravenous hemotherapy by its therapeutic efficacy and major medicinal effects can be well compared with intravascular laser hemotherapy. With good prospects and efficiency is laser therapy as a combination of laser and other physical factors. Magnetolaser therapy has been scientifically substantiated and practically applied so far. Theoretically and experimentally substantiated is a combined application of laser radiation and physical factors such as ultrasound, direct current field, vacuum, cryotherapy, etc. Experimental research and few so far clinical observations are indicative of prospects of a complex application of laser radiation and drugs. To improve light absorption, laser radiation is combined with different dyes. Photodynamic therapy, originally used in oncology, is applied today in treating different diseases. We showed a possibility of using a number of drugs possessing simultaneously photosensitizing properties to this end. Laser radiation significantly influences pharmacokinetics and pharmacodynamics of drugs, which gives reason to practically implement laser technologies, based on pharmacomodulating action of laser radiation, to practical medicine.

A preliminary qualitative exploration of dietitians' engagement with genetics and nutritional genomics: perspectives from international leaders.

PubMed

Li, Sherly X; Collins, Jorja; Lawson, Stephanie; Thomas, Jane; Truby, Helen; Whelan, Kevin; Palermo, Claire

2014-01-01

This qualitative study explored the underlying determinants of dietitians' current practice and attitudes about nutritional genomics. Sixteen semi-structured interviews were conducted with international leaders selected across each domain of dietetics practice from Australia (n=8) and the United Kingdom (n=8). Interviews explored knowledge, involvement, perceived role, and attitudes about the benefits and barriers of genetics and nutritional genomics. Interviews were transcribed and analysed using thematic analysis. Five key themes were identified: (i) acknowledgment that there are wide applications for nutritional genomics; (ii) a general lack of awareness of nutritional genomics that underlies a knowledge, skills, and confidence gap; (iii) dietitians are patient-orientated and thus are receptive to the public's needs; (iv) the legitimacy of commercialised nutritional genomics products and services; and (v) prioritisation of nutritional genomics amongst other practice-related commitments as well as the influence of the workplace setting. In order for healthcare services to prepare for the application of nutritional genomics, these social, political, attitudinal, and awareness issues amongst dietitians need to be addressed. Further education in nutritional genomics may help to build awareness, continued research is crucial in determining utility, whilst establishing a healthcare system that supports and rewards this approach may cultivate its adoption.

Judith Butler's theories: reflections for nursing research and practice.

PubMed

Nagington, Maurice G

2016-10-01

Judith Butler is one of the most influential late 20th and early 21st century philosophers in regard to left wing politics, as well as an active campaigner for social justice within the United States and worldwide. Her academic work has been foundational to the academic discipline of queer theory and has been extensively critiqued and applied across a hugely wide range of disciplines. In addition, Butler's work itself is extensive covering topics such as gender, sexuality, race, literary theory, and warfare. This article can only serve as a taster for the potential application of her work in relation to nursing, which is in its infancy. This introduction covers three of the potentially most productive themes in Butler's work, namely power, performativity, and ethics. Each of these themes are critically explored in turn, sometimes in relation to their actual application in nursing literature, but also in relation to their potential for producing novel critiques of nursing practice. Suggestions are made about how Butler's work can develop nursing research and practice. The article concludes with a short summary of Butler's key works as well as suggested reading for people interested in examining how her theories have been applied across different academic settings. © 2016 John Wiley & Sons Ltd.

Clearing muddied waters: Capture of environmental DNA from turbid waters.

PubMed

Williams, Kelly E; Huyvaert, Kathryn P; Piaggio, Antoinette J

2017-01-01

Understanding the differences in efficiencies of various methods to concentrate, extract, and amplify environmental DNA (eDNA) is vital for best performance of eDNA detection. Aquatic systems vary in characteristics such as turbidity, eDNA concentration, and inhibitor load, thus affecting eDNA capture efficiency. Application of eDNA techniques to the detection of terrestrial invasive or endangered species may require sampling at intermittent water sources that are used for drinking and cooling; these water bodies may often be stagnant and turbid. We present our best practices technique for the detection of wild pig eDNA in water samples, a protocol that will have wide applicability to the detection of elusive vertebrate species. We determined the best practice for eDNA capture in a turbid water system was to concentrate DNA from a 15 mL water sample via centrifugation, purify DNA with the DNeasy mericon Food kit, and remove inhibitors with Zymo Inhibitor Removal Technology columns. Further, we compared the sensitivity of conventional PCR to quantitative PCR and found that quantitative PCR was more sensitive in detecting lower concentrations of eDNA. We show significant differences in efficiencies among methods in each step of eDNA capture, emphasizing the importance of optimizing best practices for the system of interest.

Clearing muddied waters: Capture of environmental DNA from turbid waters

PubMed Central

Huyvaert, Kathryn P.; Piaggio, Antoinette J.

2017-01-01

Understanding the differences in efficiencies of various methods to concentrate, extract, and amplify environmental DNA (eDNA) is vital for best performance of eDNA detection. Aquatic systems vary in characteristics such as turbidity, eDNA concentration, and inhibitor load, thus affecting eDNA capture efficiency. Application of eDNA techniques to the detection of terrestrial invasive or endangered species may require sampling at intermittent water sources that are used for drinking and cooling; these water bodies may often be stagnant and turbid. We present our best practices technique for the detection of wild pig eDNA in water samples, a protocol that will have wide applicability to the detection of elusive vertebrate species. We determined the best practice for eDNA capture in a turbid water system was to concentrate DNA from a 15 mL water sample via centrifugation, purify DNA with the DNeasy mericon Food kit, and remove inhibitors with Zymo Inhibitor Removal Technology columns. Further, we compared the sensitivity of conventional PCR to quantitative PCR and found that quantitative PCR was more sensitive in detecting lower concentrations of eDNA. We show significant differences in efficiencies among methods in each step of eDNA capture, emphasizing the importance of optimizing best practices for the system of interest. PMID:28686659

A web access script language to support clinical application development.

PubMed

O'Kane, K C; McColligan, E E

1998-02-01

This paper describes the development of a script language to support the implementation of decentralized, clinical information applications on the World Wide Web (Web). The goal of this work is to facilitate construction of low overhead, fully functional clinical information systems that can be accessed anywhere by low cost Web browsers to search, retrieve and analyze stored patient data. The Web provides a model of network access to data bases on a global scale. Although it was originally conceived as a means to exchange scientific documents, Web browsers and servers currently support access to a wide variety of audio, video, graphical and text based data to a rapidly growing community. Access to these services is via inexpensive client software browsers that connect to servers by means of the open architecture of the Internet. In this paper, the design and implementation of a script language that supports the development of low cost, Web-based, distributed clinical information systems for both Inter- and Intra-Net use is presented. The language is based on the Mumps language and, consequently, supports many legacy applications with few modifications. Several enhancements, however, have been made to support modern programming practices and the Web interface. The interpreter for the language also supports standalone program execution on Unix, MS-Windows, OS/2 and other operating systems.

Unusual continuous dual absorption peaks in Ca-doped BiFeO3 nanostructures for broadened microwave absorption.

PubMed

Li, Zhong-Jun; Hou, Zhi-Ling; Song, Wei-Li; Liu, Xing-Da; Cao, Wen-Qiang; Shao, Xiao-Hong; Cao, Mao-Sheng

2016-05-21

Electromagnetic absorption materials have received increasing attention owing to their wide applications in aerospace, communication and the electronics industry, and multiferroic materials with both polarization and magnetic properties are considered promising ceramics for microwave absorption application. However, the insufficient absorption intensity coupled with the narrow effective absorption bandwidth has limited the development of high-performance multiferroic materials for practical microwave absorption. To address such issues, in the present work, we utilize interfacial engineering in BiFeO3 nanoparticles via Ca doping, with the purpose of tailoring the phase boundary. Upon Ca-substitution, the co-existence of both R3c and P4mm phases has been confirmed to massively enhance both dielectric and magnetic properties via manipulating the phase boundary and the destruction of the spiral spin structure. Unlike the commonly reported magnetic/dielectric hybrid microwave absorption composites, Bi0.95Ca0.05FeO3 has been found to deliver unusual continuous dual absorption peaks at a small thickness (1.56 mm), which has remarkably broadened the effective absorption bandwidth (8.7-12.1 GHz). The fundamental mechanisms based on the phase boundary engineering have been discussed, suggesting a novel platform for designing advanced multiferroic materials with wide applications.

Omni-Purpose Stretchable Strain Sensor Based on a Highly Dense Nanocracking Structure for Whole-Body Motion Monitoring.

PubMed

Jeon, Hyungkook; Hong, Seong Kyung; Kim, Min Seo; Cho, Seong J; Lim, Geunbae

2017-12-06

Here, we report an omni-purpose stretchable strain sensor (OPSS sensor) based on a nanocracking structure for monitoring whole-body motions including both joint-level and skin-level motions. By controlling and optimizing the nanocracking structure, inspired by the spider sensory system, the OPSS sensor is endowed with both high sensitivity (gauge factor ≈ 30) and a wide working range (strain up to 150%) under great linearity (R 2 = 0.9814) and fast response time (<30 ms). Furthermore, the fabrication process of the OPSS sensor has advantages of being extremely simple, patternable, integrated circuit-compatible, and reliable in terms of reproducibility. Using the OPSS sensor, we detected various human body motions including both moving of joints and subtle deforming of skin such as pulsation. As specific medical applications of the sensor, we also successfully developed a glove-type hand motion detector and a real-time Morse code communication system for patients with general paralysis. Therefore, considering the outstanding sensing performances, great advantages of the fabrication process, and successful results from a variety of practical applications, we believe that the OPSS sensor is a highly suitable strain sensor for whole-body motion monitoring and has potential for a wide range of applications, such as medical robotics and wearable healthcare devices.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qiao, Hongzhu; Rao, N.S.V.; Protopopescu, V.

Regression or function classes of Euclidean type with compact support and certain smoothness properties are shown to be PAC learnable by the Nadaraya-Watson estimator based on complete orthonormal systems. While requiring more smoothness properties than typical PAC formulations, this estimator is computationally efficient, easy to implement, and known to perform well in a number of practical applications. The sample sizes necessary for PAC learning of regressions or functions under sup norm cost are derived for a general orthonormal system. The result covers the widely used estimators based on Haar wavelets, trignometric functions, and Daubechies wavelets.

[Development of Chinese forensic Y-STR DNA database].

PubMed

Ge, Jian-Ye; Yan, Jiang-Wei; Xie, Qun; Sun, Hong-Yu; Zhou, Huai-Gu; Li, Bin

2013-06-01

Y chromosome is a male-specific paternal inherited chromosome. The STR markers on Y chromosome have been widely used in forensic practices. This article summarizes the characteristics of Y-STR and some factors are considered of selecting appropriate Y-STR markers for Chinese population. The prospects of existing and potential forensic applications of Y-STR profiles are discussed including familial excluding, familial searching, crowd source deducing, mixture sample testing, and kinship identifying. The research, development, verification of Y-STR kit, Y-STR mutation rate, and search software are explored and some suggestions are given.

Nuflood, Version 1.x

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tasseff, Byron

2016-07-29

NUFLOOD Version 1.x is a surface-water hydrodynamic package designed for the simulation of overland flow of fluids. It consists of various routines to address a wide range of applications (e.g., rainfall-runoff, tsunami, storm surge) and real time, interactive visualization tools. NUFLOOD has been designed for general-purpose computers and workstations containing multi-core processors and/or graphics processing units. The software is easy to use and extensible, constructed in mind for instructors, students, and practicing engineers. NUFLOOD is intended to assist the water resource community in planning against water-related natural disasters.

Towards fish-eye camera based in-home activity assessment.

PubMed

Bas, Erhan; Erdogmus, Deniz; Ozertem, Umut; Pavel, Misha

2008-01-01

Indoors localization, activity classification, and behavioral modeling are increasingly important for surveillance applications including independent living and remote health monitoring. In this paper, we study the suitability of fish-eye cameras (high-resolution CCD sensors with very-wide-angle lenses) for the purpose of monitoring people in indoors environments. The results indicate that these sensors are very useful for automatic activity monitoring and people tracking. We identify practical and mathematical problems related to information extraction from these video sequences and identify future directions to solve these issues.

Physics and engineering aspects of cell and tissue imaging systems: microscopic devices and computer assisted diagnosis.

PubMed

Chen, Xiaodong; Ren, Liqiang; Zheng, Bin; Liu, Hong

2013-01-01

The conventional optical microscopes have been used widely in scientific research and in clinical practice. The modern digital microscopic devices combine the power of optical imaging and computerized analysis, archiving and communication techniques. It has a great potential in pathological examinations for improving the efficiency and accuracy of clinical diagnosis. This chapter reviews the basic optical principles of conventional microscopes, fluorescence microscopes and electron microscopes. The recent developments and future clinical applications of advanced digital microscopic imaging methods and computer assisted diagnosis schemes are also discussed.

Identification of Curie temperature distributions in magnetic particulate systems

NASA Astrophysics Data System (ADS)

Waters, J.; Berger, A.; Kramer, D.; Fangohr, H.; Hovorka, O.

2017-09-01

This paper develops a methodology for extracting the Curie temperature distribution from magnetisation versus temperature measurements which are realizable by standard laboratory magnetometry. The method is integral in nature, robust against various sources of measurement noise, and can be adopted to a wide range of granular magnetic materials and magnetic particle systems. The validity and practicality of the method is demonstrated using large-scale Monte-Carlo simulations of an Ising-like model as a proof of concept, and general conclusions are drawn about its applicability to different classes of systems and experimental conditions.

Robust interferometry against imperfections based on weak value amplification

NASA Astrophysics Data System (ADS)

Fang, Chen; Huang, Jing-Zheng; Zeng, Guihua

2018-06-01

Optical interferometry has been widely used in various high-precision applications. Usually, the minimum precision of an interferometry is limited by various technical noises in practice. To suppress such kinds of noises, we propose a scheme which combines the weak measurement with the standard interferometry. The proposed scheme dramatically outperforms the standard interferometry in the signal-to-noise ratio and the robustness against noises caused by the optical elements' reflections and the offset fluctuation between two paths. A proof-of-principle experiment is demonstrated to validate the amplification theory.

WMSA for wireless communication applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vats, Monika; Agarwal, Alok, E-mail: alokagarwal26@yahoo.com; Kumar, Ravindra

2016-03-09

Modified rectangular compact microstrip patch antenna having finite ground plane is proposed in this paper. Wideband Microstrip Antenna (WMSA) is achieved by corner cut and inserting air gaps inside the edges of the radiating patch having finite ground plane. The obtained impedance bandwidth for 10 dB return loss for the operating frequency f{sub 0} = 2.09 GHz is 28.7 % (600 MHz), which is very high as compared to the bandwidth obtained for the conventional microstrip antenna. Compactness with wide bandwidth of this antenna is practically useful for the wireless communication systems.

What Works: Study Circles in the Real World. Best Practices for Producing Community-Wide Study Circles.

ERIC Educational Resources Information Center

Mengual, Gloria

This document, which is based on information gathered during a 1998 study of how study circle programs contribute to community problem solving, presents best practices for producing community-wide study circles. The best practices are illustrated through stories that are grouped into five sections on the following themes: (1) creating a…

The Classroom Observation Protocol for Undergraduate STEM (COPUS): A New Instrument to Characterize University STEM Classroom Practices

ERIC Educational Resources Information Center

Smith, Michelle K.; Jones, Francis H. M.; Gilbert, Sarah L.; Wieman, Carl E.

2013-01-01

Instructors and the teaching practices they employ play a critical role in improving student learning in college science, technology, engineering, and mathematics (STEM) courses. Consequently, there is increasing interest in collecting information on the range and frequency of teaching practices at department-wide and institution-wide scales. To…

Applications of MMPBSA to Membrane Proteins I: Efficient Numerical Solutions of Periodic Poisson-Boltzmann Equation

PubMed Central

Botello-Smith, Wesley M.; Luo, Ray

2016-01-01

Continuum solvent models have been widely used in biomolecular modeling applications. Recently much attention has been given to inclusion of implicit membrane into existing continuum Poisson-Boltzmann solvent models to extend their applications to membrane systems. Inclusion of an implicit membrane complicates numerical solutions of the underlining Poisson-Boltzmann equation due to the dielectric inhomogeneity on the boundary surfaces of a computation grid. This can be alleviated by the use of the periodic boundary condition, a common practice in electrostatic computations in particle simulations. The conjugate gradient and successive over-relaxation methods are relatively straightforward to be adapted to periodic calculations, but their convergence rates are quite low, limiting their applications to free energy simulations that require a large number of conformations to be processed. To accelerate convergence, the Incomplete Cholesky preconditioning and the geometric multi-grid methods have been extended to incorporate periodicity for biomolecular applications. Impressive convergence behaviors were found as in the previous applications of these numerical methods to tested biomolecules and MMPBSA calculations. PMID:26389966

Innovative educational methods and technologies applicable to continuing professional development in periodontology.

PubMed

Mattheos, N; Schoonheim-Klein, M; Walmsley, A D; Chapple, I L C

2010-05-01

Continuous professional development (CPD) in Periodontology refers to the overall framework of opportunities that facilitate a life-long learning practice, driven by the learner-practitioner and supported by a variety of institutions and individuals. CPD must address different needs for a great diversity of practitioners. It is clear that no particular methodology or technology is able to successfully accommodate the entire spectrum of CPD in Periodontology. Course designers must choose from and combine a wide array of methodologies and technologies, depending upon the needs of the learners and the objectives of the intended education. Research suggests that 'interactivity', 'flexibility', 'continuity' and 'relevance to learners' practice' are major characteristics of successful CPD. Various methods of mentoring, peer-learning environments and work-based learning have been combined with reflective practice and self-study to form the methodological backbone of CPD courses. Blended learning encompasses a wide array of technologies and methodologies and has been successfully used in CPD courses. Internet-based content learning management systems, portable Internet devices, powerful databases and search engines, together with initiatives such as 'open access' and 'open courseware' provide an array of effective instructional and communication tools. Assessment remains a key issue in CPD, providing learners with valuable feedback and it ensures the credibility and effectiveness of the learning process. Assessment is a multi-level process using different methods for different learning outcomes, as directed by current evidence and best practices. Finally, quality assurance of the education provided must follow CPD courses at all times through a structured and credible process.

Inference of human continental origin and admixture proportions using a highly discriminative ancestry informative 41-SNP panel

PubMed Central

2013-01-01

Background Accurate determination of genetic ancestry is of high interest for many areas such as biomedical research, personal genomics and forensics. It remains an important topic in genetic association studies, as it has been shown that population stratification, if not appropriately considered, can lead to false-positive and -negative results. While large association studies typically extract ancestry information from available genome-wide SNP genotypes, many important clinical data sets on rare phenotypes and historical collections assembled before the GWAS area are in need of a feasible method (i.e., ease of genotyping, small number of markers) to infer the geographic origin and potential admixture of the study subjects. Here we report on the development, application and limitations of a small, multiplexable ancestry informative marker (AIM) panel of SNPs (or AISNP) developed specifically for this purpose. Results Based on worldwide populations from the HGDP, a 41-AIM AISNP panel for multiplex application with the ABI SNPlex and a subset with 31 AIMs for the Sequenome iPLEX system were selected and found to be highly informative for inferring ancestry among the seven continental regions Africa, the Middle East, Europe, Central/South Asia, East Asia, the Americas and Oceania. The panel was found to be least informative for Eurasian populations, and additional AIMs for a higher resolution are suggested. A large reference set including over 4,000 subjects collected from 120 global populations was assembled to facilitate accurate ancestry determination. We show practical applications of this AIM panel, discuss its limitations for admixed individuals and suggest ways to incorporate ancestry information into genetic association studies. Conclusion We demonstrated the utility of a small AISNP panel specifically developed to discern global ancestry. We believe that it will find wide application because of its feasibility and potential for a wide range of applications. PMID:23815888

Building and executing a research agenda toward conducting implementation science in medical education.

PubMed

Carney, Patricia A; Crites, Gerald E; Miller, Karen H; Haight, Michelle; Stefanidis, Dimitrios; Cichoskikelly, Eileen; Price, David W; Akinola, Modupeola O; Scott, Victoria C; Kalishman, Summers

2016-01-01

Implementation science (IS) is the study of methods that successfully integrate best evidence into practice. Although typically applied in healthcare settings to improve patient care and subsequent outcomes, IS also has immediate and practical applications to medical education toward improving physician training and educational outcomes. The objective of this article is to illustrate how to build a research agenda that focuses on applying IS principles in medical education. We examined the literature to construct a rationale for using IS to improve medical education. We then used a generalizable scenario to step through a process for applying IS to improve team-based care. IS provides a valuable approach to medical educators and researchers for making improvements in medical education and overcoming institution-based challenges. It encourages medical educators to systematically build upon the research outcomes of others to guide decision-making while evaluating the successes of best practices in individual environments and generate additional research questions and findings. IS can act as both a driver and a model for educational research to ensure that best educational practices are easier and faster to implement widely.

Euthanasia and surgeons: an overview of the Victorian Voluntary Assisted Dying Act 2017 and its relevance to surgical practice in Australia.

PubMed

Beardsley, Christian; Brown, Kilian; Sandroussi, Charbel

2018-05-14

Surgeons play a significant role in the treatment of patients with many types of cancer, including the management of advanced and recurrent disease after long periods of apparent remission. The recently introduced Victorian Voluntary Assisted Dying (VAD) Act represents a shift in paradigm in Australian medical practice. To be eligible for VAD, the new legislation requires patient assessment by a physician with at least 5 years post-fellowship experience and relevant expertise in the patient's condition. Given many specialist surgeons' experience in managing advanced and often incurable malignancy, it is likely that many will receive referrals for assessment for VAD. It is foreseeable that other states and territories in Australia will follow suit with similar legislation. It is imperative that surgeons receiving referrals to assess patients seeking access to VAD are familiar with the legislation and assessment process. This article summarizes the current regulation of VAD in Australia, including the patient application and assessment process, briefly reviews world-wide assisted dying practices and discusses the relevance to surgeons practicing in Australia. © 2018 Royal Australasian College of Surgeons.

Advances in diagnostic ultrasonography.

PubMed

Reef, V B

1991-08-01

A wide variety of ultrasonographic equipment currently is available for use in equine practice, but no one machine is optimal for every type of imaging. Image quality is the most important factor in equipment selection once the needs of the practitioner are ascertained. The transducer frequencies available, transducer footprints, depth of field displayed, frame rate, gray scale, simultaneous electrocardiography, Doppler, and functions to modify the image are all important considerations. The ability to make measurements off of videocassette recorder playback and future upgradability should be evaluated. Linear array and sector technology are the backbone of equine ultrasonography today. Linear array technology is most useful for a high-volume broodmare practice, whereas sector technology is ideal for a more general equine practice. The curved or convex linear scanner has more applications than the standard linear array and is equipped with the linear array rectal probe, which provides the equine practitioner with a more versatile unit for equine ultrasonographic evaluations. The annular array and phased array systems have improved image quality, but each has its own limitations. The new sector scanners still provide the most versatile affordable equipment for equine general practice.

Microengineering of magnetic bearings and actuators

NASA Astrophysics Data System (ADS)

Ghantasala, Muralihar K.; Qin, LiJiang; Sood, Dinesh K.; Zmood, Ronald B.

2000-06-01

Microengineering has evolved in the last decade as a subject of its own with the current research encompassing every possible area of devices from electromagnetic to optical and bio-micro electromechanical systems (MEMS). The primary advantage of the micro system technology is its small size, potential to produce high volume and low cost devices. However, the major impediments in the successful realization of many micro devices in practice are the reliability, packaging and integration with the existing microelectronics technology. Microengineering of actuators has recently grown tremendously due to its possible applicability to a wide range of devices of practical importance and the availability of a choice of materials. Selection of materials has been one of the important aspects of the design and fabrication of many micro system and actuators. This paper discusses the issues related to the selection of materials and subsequently their effect on the performance of the actuator. These will be discussed taking micro magnetic actuators and bearings, in particular, as examples. Fabrication and processing strategies and performance evaluation methods adopted will be described. Current status of the technology and projected futuristic applications in this area will be reviewed.

MR-guided focused ultrasound surgery, present and future

PubMed Central

Schlesinger, David; Benedict, Stanley; Diederich, Chris; Gedroyc, Wladyslaw; Klibanov, Alexander; Larner, James

2013-01-01

MR-guided focused ultrasound surgery (MRgFUS) is a quickly developing technology with potential applications across a spectrum of indications traditionally within the domain of radiation oncology. Especially for applications where focal treatment is the preferred technique (for example, radiosurgery), MRgFUS has the potential to be a disruptive technology that could shift traditional patterns of care. While currently cleared in the United States for the noninvasive treatment of uterine fibroids and bone metastases, a wide range of clinical trials are currently underway, and the number of publications describing advances in MRgFUS is increasing. However, for MRgFUS to make the transition from a research curiosity to a clinical standard of care, a variety of challenges, technical, financial, clinical, and practical, must be overcome. This installment of the Vision 20/20 series examines the current status of MRgFUS, focusing on the hurdles the technology faces before it can cross over from a research technique to a standard fixture in the clinic. It then reviews current and near-term technical developments which may overcome these hurdles and allow MRgFUS to break through into clinical practice. PMID:23927296

Finding and estimating chemical property data for environmental assessment.

PubMed

Boethling, Robert S; Howard, Philip H; Meylan, William M

2004-10-01

The ability to predict the behavior of a chemical substance in a biological or environmental system largely depends on knowledge of the physicochemical properties and reactivity of that substance. We focus here on properties, with the objective of providing practical guidance for finding measured values and using estimation methods when necessary. Because currently available computer software often makes it more convenient to estimate than to retrieve measured values, we try to discourage irrational exuberance for these tools by including comprehensive lists of Internet and hard-copy data resources. Guidance for assessors is presented in the form of a process to obtain data that includes establishment of chemical identity, identification of data sources, assessment of accuracy and reliability, substructure searching for analogs when experimental data are unavailable, and estimation from chemical structure. Regarding property estimation, we cover estimation from close structural analogs in addition to broadly applicable methods requiring only the chemical structure. For the latter, we list and briefly discuss the most widely used methods. Concluding thoughts are offered concerning appropriate directions for future work on estimation methods, again with an emphasis on practical applications.

Kaiy (traditional cautery) in Benghazi, Libya: complications versus effectiveness

PubMed Central

Farid, Mona Kamal; El-Mansoury, Abdulla

2015-01-01

Introduction The practice of Kaiy (Cautery) as a traditional therapy is not science based though it is widely practiced worldwide. In Libya, in particular, it is commonly used with no any report or publication to emphasis on its positive or negative impact. This work was undertaken to highlight the complications and disadvantages of kaiy in the Libyan societies as it seems to cause more harm than benefit for the patient. Methods We conducted a questionnaire-based survey in the period from the first of March to the end of April (two months) of the year 2013, on fifty patients who were collected from different hospitals in Benghazi city, and who had experienced Kaiy therapy for different diseases. Results We found that kaiy application is more common among non educated patients (30 patients, 60%). Most of patients (45 cases, 90%) followed their relatives’ advice and that 32 cases (63.5%) did not improve and show undesirable manifestations and complications. Conclusion This study has shown that Kaiy therapy is associated with considerable health risks; therefore, we recommend discouraging and restricting its application. PMID:26848345

Kaiy (traditional cautery) in Benghazi, Libya: complications versus effectiveness.

PubMed

Farid, Mona Kamal; El-Mansoury, Abdulla

2015-01-01

The practice of Kaiy (Cautery) as a traditional therapy is not science based though it is widely practiced worldwide. In Libya, in particular, it is commonly used with no any report or publication to emphasis on its positive or negative impact. This work was undertaken to highlight the complications and disadvantages of kaiy in the Libyan societies as it seems to cause more harm than benefit for the patient. We conducted a questionnaire-based survey in the period from the first of March to the end of April (two months) of the year 2013, on fifty patients who were collected from different hospitals in Benghazi city, and who had experienced Kaiy therapy for different diseases. We found that kaiy application is more common among non educated patients (30 patients, 60%). Most of patients (45 cases, 90%) followed their relatives' advice and that 32 cases (63.5%) did not improve and show undesirable manifestations and complications. This study has shown that Kaiy therapy is associated with considerable health risks; therefore, we recommend discouraging and restricting its application.

Pharmacogenetics in dermatology: a patient-centered update.

PubMed

Comfere, Nneka I; Ikediobi, Ogechi N; Peters, Margot S; el-Azhary, Rokea A; Gibson, Lawrence E

2013-08-01

The term pharmacogenetics is used to describe an evolving field that aims to understand the relationship between individual variations in genetic sequence and differences in the therapeutic and toxic response to medications. The promise of pharmacogenetics is empowerment of clinicians with information that will enable them to personalize drug therapy - to prescribe the right medication at the right dose for each patient, while minimizing adverse effects. Despite dramatic advances, wide application of pharmacogenetics to clinical practice has been slow for a number of reasons, including lack of evidence-based therapeutic guidelines as well as ethical concerns and cost. To illustrate applications to dermatology practice, we present three clinical scenarios that serve as a springboard for discussion of the principles of pharmacogenetics and how they can be used to guide treatment with azathioprine, 5-fluorouracil, and trastuzumab. The therapeutic and toxic effects of a given medication ultimately depend on its combined pharmacokinetic, pharmacodynamic, and pharmacogenetic properties in a given individual. Pharmacodynamic properties of individual medications must be correlated with single nucleotide polymorphisms. Test recommendations and standardization of therapy for specific disorders can then be established. © 2013 The International Society of Dermatology.

Protocols for Handling Messages Between Simulation Computers

NASA Technical Reports Server (NTRS)

Balcerowski, John P.; Dunnam, Milton

2006-01-01

Practical Simulator Network (PSimNet) is a set of data-communication protocols designed especially for use in handling messages between computers that are engaging cooperatively in real-time or nearly-real-time training simulations. In a typical application, computers that provide individualized training at widely dispersed locations would communicate, by use of PSimNet, with a central host computer that would provide a common computational- simulation environment and common data. Originally intended for use in supporting interfaces between training computers and computers that simulate the responses of spacecraft scientific payloads, PSimNet could be especially well suited for a variety of other applications -- for example, group automobile-driver training in a classroom. Another potential application might lie in networking of automobile-diagnostic computers at repair facilities to a central computer that would compile the expertise of numerous technicians and engineers and act as an expert consulting technician.

Evaluation of Service Level Agreement Approaches for Portfolio Management in the Financial Industry

NASA Astrophysics Data System (ADS)

Pontz, Tobias; Grauer, Manfred; Kuebert, Roland; Tenschert, Axel; Koller, Bastian

The idea of service-oriented Grid computing seems to have the potential for fundamental paradigm change and a new architectural alignment concerning the design of IT infrastructures. There is a wide range of technical approaches from scientific communities which describe basic infrastructures and middlewares for integrating Grid resources in order that by now Grid applications are technically realizable. Hence, Grid computing needs viable business models and enhanced infrastructures to move from academic application right up to commercial application. For a commercial usage of these evolutions service level agreements are needed. The developed approaches are primary of academic interest and mostly have not been put into practice. Based on a business use case of the financial industry, five service level agreement approaches have been evaluated in this paper. Based on the evaluation, a management architecture has been designed and implemented as a prototype.

Functionalization of vertically aligned carbon nanotubes.

PubMed

Van Hooijdonk, Eloise; Bittencourt, Carla; Snyders, Rony; Colomer, Jean-François

2013-01-01

This review focuses and summarizes recent studies on the functionalization of carbon nanotubes oriented perpendicularly to their substrate, so-called vertically aligned carbon nanotubes (VA-CNTs). The intrinsic properties of individual nanotubes make the VA-CNTs ideal candidates for integration in a wide range of devices, and many potential applications have been envisaged. These applications can benefit from the unidirectional alignment of the nanotubes, the large surface area, the high carbon purity, the outstanding electrical conductivity, and the uniformly long length. However, practical uses of VA-CNTs are limited by their surface characteristics, which must be often modified in order to meet the specificity of each particular application. The proposed approaches are based on the chemical modifications of the surface by functionalization (grafting of functional chemical groups, decoration with metal particles or wrapping of polymers) to bring new properties or to improve the interactions between the VA-CNTs and their environment while maintaining the alignment of CNTs.

Functionalization of vertically aligned carbon nanotubes

PubMed Central

Snyders, Rony; Colomer, Jean-François

2013-01-01

Summary This review focuses and summarizes recent studies on the functionalization of carbon nanotubes oriented perpendicularly to their substrate, so-called vertically aligned carbon nanotubes (VA-CNTs). The intrinsic properties of individual nanotubes make the VA-CNTs ideal candidates for integration in a wide range of devices, and many potential applications have been envisaged. These applications can benefit from the unidirectional alignment of the nanotubes, the large surface area, the high carbon purity, the outstanding electrical conductivity, and the uniformly long length. However, practical uses of VA-CNTs are limited by their surface characteristics, which must be often modified in order to meet the specificity of each particular application. The proposed approaches are based on the chemical modifications of the surface by functionalization (grafting of functional chemical groups, decoration with metal particles or wrapping of polymers) to bring new properties or to improve the interactions between the VA-CNTs and their environment while maintaining the alignment of CNTs. PMID:23504581

Versatile and declarative dynamic programming using pair algebras.

PubMed

Steffen, Peter; Giegerich, Robert

2005-09-12

Dynamic programming is a widely used programming technique in bioinformatics. In sharp contrast to the simplicity of textbook examples, implementing a dynamic programming algorithm for a novel and non-trivial application is a tedious and error prone task. The algebraic dynamic programming approach seeks to alleviate this situation by clearly separating the dynamic programming recurrences and scoring schemes. Based on this programming style, we introduce a generic product operation of scoring schemes. This leads to a remarkable variety of applications, allowing us to achieve optimizations under multiple objective functions, alternative solutions and backtracing, holistic search space analysis, ambiguity checking, and more, without additional programming effort. We demonstrate the method on several applications for RNA secondary structure prediction. The product operation as introduced here adds a significant amount of flexibility to dynamic programming. It provides a versatile testbed for the development of new algorithmic ideas, which can immediately be put to practice.

Thermoelectricity for future sustainable energy technologies

NASA Astrophysics Data System (ADS)

Weidenkaff, Anke

2017-07-01

Thermoelectricity is a general term for a number of effects describing the direct interconversion of heat and electricity. Thermoelectric devices are therefore promising, environmental-friendly alternatives to conventional power generators or cooling units. Since the mid-90s, research on thermoelectric properties and their applications has steadily increased. In the course of years, the development of high-temperature resistant TE materials and devices has emerged as one of the main areas of interest focusing both on basic research and practical applications. A wide range of innovative and cost-efficient material classes has been studied and their properties improved. This has also led to advances in synthesis and metrology. The paper starts out with thermoelectric history, basic effects underlying thermoelectric conversion and selected examples of application. The main part focuses on thermoelectric materials including an outline of the design rules, a review on the most common materials and the feasibility of improved future high-temperature thermoelectric converters.

A wavefront reconstruction method for 3-D cylindrical subsurface radar imaging.

PubMed

Flores-Tapia, Daniel; Thomas, Gabriel; Pistorius, Stephen

2008-10-01

In recent years, the use of radar technology has been proposed in a wide range of subsurface imaging applications. Traditionally, linear scan trajectories are used to acquire data in most subsurface radar applications. However, novel applications, such as breast microwave imaging and wood inspection, require the use of nonlinear scan trajectories in order to adjust to the geometry of the scanned area. This paper proposes a novel reconstruction algorithm for subsurface radar data acquired along cylindrical scan trajectories. The spectrum of the collected data is processed in order to locate the spatial origin of the target reflections and remove the spreading of the target reflections which results from the different signal travel times along the scan trajectory. The proposed algorithm was successfully tested using experimental data collected from phantoms that mimic high contrast subsurface radar scenarios, yielding promising results. Practical considerations such as spatial resolution and sampling constraints are discussed and illustrated as well.

Latent curing systems stabilized by reaction equilibrium in homogeneous mixtures of benzoxazine and amine

PubMed Central

Wang, Jun; Xu, Ya Zhen; Fu, Ya Fei; Liu, Xiang Dong

2016-01-01

Latent curing systems are widely used in industrial thermosets in applications such as adhesion, coating, and composites. Despite many attempts to improve the practicality of this dormant reaction system, the majority of commercially available latent products still use particulate hardeners or liquid compounds with blocked active groups. These formulations generally lack fluidity or rapid reaction characteristics and thus are problematic in some industry applications. Here we describe a novel concept that stabilizes highly reactive benzoxazine/amine mixtures by reaction equilibrium. These new latent benzoxazine curing systems have a long storable lifetime but very short gel time at 150 °C. The reversible reaction between benzoxazine and amine is further demonstrated by FT-IR spectral measurements and rheological experiments, and it is shown that the overall characteristics of the latent system are promising for many industrial applications. PMID:27917932

Plant protection and growth stimulation by microorganisms: biotechnological applications of Bacilli in agriculture.

PubMed

Pérez-García, Alejandro; Romero, Diego; de Vicente, Antonio

2011-04-01

The increasing demand for a steady, healthy food supply requires an efficient control of the major pests and plant diseases. Current management practices are based largely on the application of synthetic pesticides. The excessive use of agrochemicals has caused serious environmental and health problems. Therefore, there is a growing demand for new and safer methods to replace or at least supplement the existing control strategies. Biological control, that is, the use of natural antagonists to combat pests or plant diseases has emerged as a promising alternative to chemical pesticides. The Bacilli offer a number of advantages for their application in agricultural biotechnology. Several Bacillus-based products have been marketed as microbial pesticides, fungicides or fertilisers. Bacillus-based biopesticides are widely used in conventional agriculture, by contrast, implementation of Bacillus-based biofungicides and biofertilizers is still a pending issue. Copyright © 2010 Elsevier Ltd. All rights reserved.

Uncovering Special Nuclear Materials by Low-energy Nuclear Reaction Imaging

NASA Astrophysics Data System (ADS)

Rose, P. B.; Erickson, A. S.; Mayer, M.; Nattress, J.; Jovanovic, I.

2016-04-01

Weapons-grade uranium and plutonium could be used as nuclear explosives with extreme destructive potential. The problem of their detection, especially in standard cargo containers during transit, has been described as “searching for a needle in a haystack” because of the inherently low rate of spontaneous emission of characteristic penetrating radiation and the ease of its shielding. Currently, the only practical approach for uncovering well-shielded special nuclear materials is by use of active interrogation using an external radiation source. However, the similarity of these materials to shielding and the required radiation doses that may exceed regulatory limits prevent this method from being widely used in practice. We introduce a low-dose active detection technique, referred to as low-energy nuclear reaction imaging, which exploits the physics of interactions of multi-MeV monoenergetic photons and neutrons to simultaneously measure the material’s areal density and effective atomic number, while confirming the presence of fissionable materials by observing the beta-delayed neutron emission. For the first time, we demonstrate identification and imaging of uranium with this novel technique using a simple yet robust source, setting the stage for its wide adoption in security applications.

Using a simulation cell for exercise realism.

PubMed

Lerner, Ken

2013-01-01

A simulation cell or SimCell is an effective and flexible tool for control of emergency management exercises. It allows exercise participants to interact, via simulation, with a wide variety of nonplaying organizations and officials. Adapted from military application, the Chemical Stockpile Emergency Preparedness Program (CSEPP) applied, developed, and refined the SimCell concept for emergency management exercises. It has now been incorporated into national exercise guidance through the Homeland Security Exercise and Evaluation Program, and has been used in a wide variety of national, regional, and local exercises. This article reviews development of the SimCell concept in CSEPP, briefly surveys current practice incorporating SimCells in exercise control, and offers practical lessons-learned and tips on using a SimCell to best advantage. Lessons learned include using a SimCell as an exercise-control hub; preparing inject material for exercise controllers as part of the Master Scenario Event List; laying the groundwork for success through exercise player and controller training; developing protocol for SimCell communications; and capturing feedback from SimCell controllers for inclusion in the exercise evaluation reporting process. The SimCell concept is flexible and can be applied to a variety of exercise types and through a variety of methods.

Uncovering Special Nuclear Materials by Low-energy Nuclear Reaction Imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rose, Jr., P. B.; Erickson, A. S.; Mayer, Michael F.

Weapons-grade uranium and plutonium could be used as nuclear explosives with extreme destructive potential. The problem of their detection, especially in standard cargo containers during transit, has been described as “searching for a needle in a haystack” because of the inherently low rate of spontaneous emission of characteristic penetrating radiation and the ease of its shielding. Currently, the only practical approach for uncovering well-shielded special nuclear materials is by use of active interrogation using an external radiation source. However, the similarity of these materials to shielding and the required radiation doses that may exceed regulatory limits prevent this method frommore » being widely used in practice. We introduce a low-dose active detection technique, referred to as low-energy nuclear reaction imaging, which exploits the physics of interactions of multi-MeV monoenergetic photons and neutrons to simultaneously measure the material’s areal density and effective atomic number, while confirming the presence of fissionable materials by observing the beta-delayed neutron emission. For the first time, we demonstrate identification and imaging of uranium with this novel technique using a simple yet robust source, setting the stage for its wide adoption in security applications.« less

Uncovering Special Nuclear Materials by Low-energy Nuclear Reaction Imaging

DOE PAGES

Rose, P. B.; Erickson, A. S.; Mayer, M.; ...

2016-04-18

Weapons-grade uranium and plutonium could be used as nuclear explosives with extreme destructive potential. The problem of their detection, especially in standard cargo containers during transit, has been described as “searching for a needle in a haystack” because of the inherently low rate of spontaneous emission of characteristic penetrating radiation and the ease of its shielding. Currently, the only practical approach for uncovering well-shielded special nuclear materials is by use of active interrogation using an external radiation source. However, the similarity of these materials to shielding and the required radiation doses that may exceed regulatory limits prevent this method frommore » being widely used in practice. We introduce a low-dose active detection technique, referred to as low-energy nuclear reaction imaging, which exploits the physics of interactions of multi-MeV monoenergetic photons and neutrons to simultaneously measure the material’s areal density and effective atomic number, while confirming the presence of fissionable materials by observing the beta-delayed neutron emission. For the first time, we demonstrate identification and imaging of uranium with this novel technique using a simple yet robust source, setting the stage for its wide adoption in security applications.« less

Uncovering Special Nuclear Materials by Low-energy Nuclear Reaction Imaging

PubMed Central

Rose, P. B.; Erickson, A. S.; Mayer, M.; Nattress, J.; Jovanovic, I.

2016-01-01

Weapons-grade uranium and plutonium could be used as nuclear explosives with extreme destructive potential. The problem of their detection, especially in standard cargo containers during transit, has been described as “searching for a needle in a haystack” because of the inherently low rate of spontaneous emission of characteristic penetrating radiation and the ease of its shielding. Currently, the only practical approach for uncovering well-shielded special nuclear materials is by use of active interrogation using an external radiation source. However, the similarity of these materials to shielding and the required radiation doses that may exceed regulatory limits prevent this method from being widely used in practice. We introduce a low-dose active detection technique, referred to as low-energy nuclear reaction imaging, which exploits the physics of interactions of multi-MeV monoenergetic photons and neutrons to simultaneously measure the material’s areal density and effective atomic number, while confirming the presence of fissionable materials by observing the beta-delayed neutron emission. For the first time, we demonstrate identification and imaging of uranium with this novel technique using a simple yet robust source, setting the stage for its wide adoption in security applications. PMID:27087555

Uncovering Special Nuclear Materials by Low-energy Nuclear Reaction Imaging.

PubMed

Rose, P B; Erickson, A S; Mayer, M; Nattress, J; Jovanovic, I

2016-04-18

Weapons-grade uranium and plutonium could be used as nuclear explosives with extreme destructive potential. The problem of their detection, especially in standard cargo containers during transit, has been described as "searching for a needle in a haystack" because of the inherently low rate of spontaneous emission of characteristic penetrating radiation and the ease of its shielding. Currently, the only practical approach for uncovering well-shielded special nuclear materials is by use of active interrogation using an external radiation source. However, the similarity of these materials to shielding and the required radiation doses that may exceed regulatory limits prevent this method from being widely used in practice. We introduce a low-dose active detection technique, referred to as low-energy nuclear reaction imaging, which exploits the physics of interactions of multi-MeV monoenergetic photons and neutrons to simultaneously measure the material's areal density and effective atomic number, while confirming the presence of fissionable materials by observing the beta-delayed neutron emission. For the first time, we demonstrate identification and imaging of uranium with this novel technique using a simple yet robust source, setting the stage for its wide adoption in security applications.

Applications of Fourier Transform Ion Cyclotron Resonance (FT-ICR) and Orbitrap Based High Resolution Mass Spectrometry in Metabolomics and Lipidomics.

PubMed

Ghaste, Manoj; Mistrik, Robert; Shulaev, Vladimir

2016-05-25

Metabolomics, along with other "omics" approaches, is rapidly becoming one of the major approaches aimed at understanding the organization and dynamics of metabolic networks. Mass spectrometry is often a technique of choice for metabolomics studies due to its high sensitivity, reproducibility and wide dynamic range. High resolution mass spectrometry (HRMS) is a widely practiced technique in analytical and bioanalytical sciences. It offers exceptionally high resolution and the highest degree of structural confirmation. Many metabolomics studies have been conducted using HRMS over the past decade. In this review, we will explore the latest developments in Fourier transform mass spectrometry (FTMS) and Orbitrap based metabolomics technology, its advantages and drawbacks for using in metabolomics and lipidomics studies, and development of novel approaches for processing HRMS data.

Applications of Fourier Transform Ion Cyclotron Resonance (FT-ICR) and Orbitrap Based High Resolution Mass Spectrometry in Metabolomics and Lipidomics

PubMed Central

Ghaste, Manoj; Mistrik, Robert; Shulaev, Vladimir

2016-01-01

Metabolomics, along with other “omics” approaches, is rapidly becoming one of the major approaches aimed at understanding the organization and dynamics of metabolic networks. Mass spectrometry is often a technique of choice for metabolomics studies due to its high sensitivity, reproducibility and wide dynamic range. High resolution mass spectrometry (HRMS) is a widely practiced technique in analytical and bioanalytical sciences. It offers exceptionally high resolution and the highest degree of structural confirmation. Many metabolomics studies have been conducted using HRMS over the past decade. In this review, we will explore the latest developments in Fourier transform mass spectrometry (FTMS) and Orbitrap based metabolomics technology, its advantages and drawbacks for using in metabolomics and lipidomics studies, and development of novel approaches for processing HRMS data. PMID:27231903

You can lead a horse to water … what Self-Determination Theory can contribute to our understanding of clinical policy implementation.

PubMed

Smith, Geoffrey P; Williams, Theresa M

2017-01-01

There has been increasing reliance on policy directives as instruments for shaping clinical practice in health care, despite it being widely recognized that there is a significant translation gap between clinical policy and its implementation. Self-Determination Theory, a widely researched and empirically validated theory of human needs' fulfilment and motivation, offers a potentially valuable theoretical framework for understanding not only why the current policy environment has not led to the anticipated improvement in the quality and safety of clinical care but, importantly, also provides guidance about how organizations can create an environment that can nurture behavioural change in the workforce. We describe an alternative approach to clinical policy-making underpinned by Self-Determination Theory, which we believe has broad application for the science of clinical implementation theory.

Developing Wide-Field Spatio-Spectral Interferometry for Far-Infrared Space Applications

NASA Technical Reports Server (NTRS)

Leisawitz, David; Bolcar, Matthew R.; Lyon, Richard G.; Maher, Stephen F.; Memarsadeghi, Nargess; Rinehart, Stephen A.; Sinukoff, Evan J.

2012-01-01

Interferometry is an affordable way to bring the benefits of high resolution to space far-IR astrophysics. We summarize an ongoing effort to develop and learn the practical limitations of an interferometric technique that will enable the acquisition of high-resolution far-IR integral field spectroscopic data with a single instrument in a future space-based interferometer. This technique was central to the Space Infrared Interferometric Telescope (SPIRIT) and Submillimeter Probe of the Evolution of Cosmic Structure (SPECS) space mission design concepts, and it will first be used on the Balloon Experimental Twin Telescope for Infrared Interferometry (BETTII). Our experimental approach combines data from a laboratory optical interferometer (the Wide-field Imaging Interferometry Testbed, WIIT), computational optical system modeling, and spatio-spectral synthesis algorithm development. We summarize recent experimental results and future plans.

The opposing forces of the intestinal Microbiome and the emerging pathobiome

PubMed Central

Defazio, Jennifer; Fleming, Irma D.; Shakhsheer, Baddr; Zaborina, Olga; Alverdy, John C.

2014-01-01

Objective The purpose of this article is to summarize emerging concepts on the role of the intestinal microbiome in surgical patients. Background Revolutionary research over the past decade has shown that human beings live in close and constant contact with boundless communities of microbes. This new reality has wide-ranging implications for the care of surgical patients. Methods and Results Recent innovations in the study of the human microbiome are reviewed. To demonstrate the applicability of these studies to surgical disease, we discuss in detail what is known about the role of microbes in the pathogenesis of perioperative complications including anastomotic leak, sepsis, and surgical site infections. Conclusions Enhanced awareness of the human microbiome will empower clinicians to adopt novel practices in the prevention and treatment of a wide variety of surgical conditions. PMID:25440116

Combined photoacoustic and magneto-acoustic imaging.

PubMed

Qu, Min; Mallidi, Srivalleesha; Mehrmohammadi, Mohammad; Ma, Li Leo; Johnston, Keith P; Sokolov, Konstantin; Emelianov, Stanislav

2009-01-01

Ultrasound is a widely used modality with excellent spatial resolution, low cost, portability, reliability and safety. In clinical practice and in the biomedical field, molecular ultrasound-based imaging techniques are desired to visualize tissue pathologies, such as cancer. In this paper, we present an advanced imaging technique - combined photoacoustic and magneto-acoustic imaging - capable of visualizing the anatomical, functional and biomechanical properties of tissues or organs. The experiments to test the combined imaging technique were performed using dual, nanoparticle-based contrast agents that exhibit the desired optical and magnetic properties. The results of our study demonstrate the feasibility of the combined photoacoustic and magneto-acoustic imaging that takes the advantages of each imaging techniques and provides high sensitivity, reliable contrast and good penetrating depth. Therefore, the developed imaging technique can be used in wide range of biomedical and clinical application.

New Developments of Computational Fluid Dynamics and Their Applications to Practical Engineering Problems

NASA Astrophysics Data System (ADS)

Chen, Hudong

2001-06-01

There have been considerable advances in Lattice Boltzmann (LB) based methods in the last decade. By now, the fundamental concept of using the approach as an alternative tool for computational fluid dynamics (CFD) has been substantially appreciated and validated in mainstream scientific research and in industrial engineering communities. Lattice Boltzmann based methods possess several major advantages: a) less numerical dissipation due to the linear Lagrange type advection operator in the Boltzmann equation; b) local dynamic interactions suitable for highly parallel processing; c) physical handling of boundary conditions for complicated geometries and accurate control of fluxes; d) microscopically consistent modeling of thermodynamics and of interface properties in complex multiphase flows. It provides a great opportunity to apply the method to practical engineering problems encountered in a wide range of industries from automotive, aerospace to chemical, biomedical, petroleum, nuclear, and others. One of the key challenges is to extend the applicability of this alternative approach to regimes of highly turbulent flows commonly encountered in practical engineering situations involving high Reynolds numbers. Over the past ten years, significant efforts have been made on this front at Exa Corporation in developing a lattice Boltzmann based commercial CFD software, PowerFLOW. It has become a useful computational tool for the simulation of turbulent aerodynamics in practical engineering problems involving extremely complex geometries and flow situations, such as in new automotive vehicle designs world wide. In this talk, we present an overall LB based algorithm concept along with certain key extensions in order to accurately handle turbulent flows involving extremely complex geometries. To demonstrate the accuracy of turbulent flow simulations, we provide a set of validation results for some well known academic benchmarks. These include straight channels, backward-facing steps, flows over a curved hill and typical NACA airfoils at various angles of attack including prediction of stall angle. We further provide numerous engineering cases, ranging from external aerodynamics around various car bodies to internal flows involved in various industrial devices. We conclude with a discussion of certain future extensions for complex fluids.

Addressing Disproportionate Discipline Practices within a School-Wide Positive Behavioral Interventions and Supports Framework: A Practical Guide for Calculating and Using Disproportionality Rates

ERIC Educational Resources Information Center

Boneshefski, Michael J.; Runge, Timothy J.

2014-01-01

Culturally responsible implementation of School-Wide Positive Behavioral Interventions and Supports (SWPBIS) requires that schools monitor indices of disciplinary practices among minority groups. School teams are encouraged to calculate risk indices and risk ratios to evaluate the extent to which students of all groups are removed from classrooms…

Sparse signal representation and its applications in ultrasonic NDE.

PubMed

Zhang, Guang-Ming; Zhang, Cheng-Zhong; Harvey, David M

2012-03-01

Many sparse signal representation (SSR) algorithms have been developed in the past decade. The advantages of SSR such as compact representations and super resolution lead to the state of the art performance of SSR for processing ultrasonic non-destructive evaluation (NDE) signals. Choosing a suitable SSR algorithm and designing an appropriate overcomplete dictionary is a key for success. After a brief review of sparse signal representation methods and the design of overcomplete dictionaries, this paper addresses the recent accomplishments of SSR for processing ultrasonic NDE signals. The advantages and limitations of SSR algorithms and various overcomplete dictionaries widely-used in ultrasonic NDE applications are explored in depth. Their performance improvement compared to conventional signal processing methods in many applications such as ultrasonic flaw detection and noise suppression, echo separation and echo estimation, and ultrasonic imaging is investigated. The challenging issues met in practical ultrasonic NDE applications for example the design of a good dictionary are discussed. Representative experimental results are presented for demonstration. Copyright © 2011 Elsevier B.V. All rights reserved.

Programmable diffractive lens for ophthalmic application

NASA Astrophysics Data System (ADS)

Millán, María S.; Pérez-Cabré, Elisabet; Romero, Lenny A.; Ramírez, Natalia

2014-06-01

Pixelated liquid crystal displays have been widely used as spatial light modulators to implement programmable diffractive optical elements, particularly diffractive lenses. Many different applications of such components have been developed in information optics and optical processors that take advantage of their properties of great flexibility, easy and fast refreshment, and multiplexing capability in comparison with equivalent conventional refractive lenses. We explore the application of programmable diffractive lenses displayed on the pixelated screen of a liquid crystal on silicon spatial light modulator to ophthalmic optics. In particular, we consider the use of programmable diffractive lenses for the visual compensation of refractive errors (myopia, hypermetropia, astigmatism) and presbyopia. The principles of compensation are described and sketched using geometrical optics and paraxial ray tracing. For the proof of concept, a series of experiments with artificial eye in optical bench are conducted. We analyze the compensation precision in terms of optical power and compare the results with those obtained by means of conventional ophthalmic lenses. Practical considerations oriented to feasible applications are provided.

Carbon-Based Functional Materials Derived from Waste for Water Remediation and Energy Storage.

PubMed

Ma, Qinglang; Yu, Yifu; Sindoro, Melinda; Fane, Anthony G; Wang, Rong; Zhang, Hua

2017-04-01

Carbon-based functional materials hold the key for solving global challenges in the areas of water scarcity and the energy crisis. Although carbon nanotubes (CNTs) and graphene have shown promising results in various fields of application, their high preparation cost and low production yield still dramatically hinder their wide practical applications. Therefore, there is an urgent call for preparing carbon-based functional materials from low-cost, abundant, and sustainable sources. Recent innovative strategies have been developed to convert various waste materials into valuable carbon-based functional materials. These waste-derived carbon-based functional materials have shown great potential in many applications, especially as sorbents for water remediation and electrodes for energy storage. Here, the research progress in the preparation of waste-derived carbon-based functional materials is summarized, along with their applications in water remediation and energy storage; challenges and future research directions in this emerging research field are also discussed. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Photonic crystal fibre for industrial laser delivery

NASA Astrophysics Data System (ADS)

O'Driscoll, E. J.; McDonald, J.; Morgan, S.; Simpson, G.; Sidhu, J.; Baggett, J. C.; Hayes, J. R.; Petrovich, M. N.; Finazzi, V.; Polletti, F.; Richardson, D. J.; Horley, R.; Harker, A.; Grunewald, P.; Allott, R.; Judd, E.

2006-12-01

Fiber delivery of intense laser radiation is important for a broad range of application sectors, from medicine through to industrial laser processing of materials, and offers many practical system benefits relative to free space solutions. In recent years, photonic crystal fiber technology has revolutionized the dynamic field of optical fibers, bringing with them a wide range of novel optical properties that make them ideally suited to power delivery with unparalleled control over the beam properties. The DTI funded project: Photonic Fibers for Industrial beam DELivery (PFIDEL), aims to develop novel fiber geometries for use as a delivery system for high power industrial lasers and to assess their potential in a range of "real" industrial applications. In this paper we review, from an industrial laser user perspective, the advantages of each of the fibers studied under PFIDEL. We present results of application demonstrations and discuss how these fibers can positively impact the field of industrial laser systems and processes, in particular for direct write and micromachining applications.

[Practice patterns in Mexican allergologists about skin tests with allergens during 2005-2006].

PubMed

Larenas Linnemann, Désirée; Fogelbach, Guillermo Arturo Guidos; Cruz, Alfredo Arias

2008-01-01

Immunotherapy has been practiced since over a hundred years. The exact composition of the immunotherapy concentrate, with which the patient is treated, depends partly on the results of the skin prick tests applied to the allergic patient. As such, the effectiveness of the immunotherapy depends heavily on the quality of the skin prick test. The detailed recommendations for the realization of the skin prick tests have evolved and changed over the years, leading to multiple variations in its application in Mexico. We tried to get a picture of the daily practice patterns of the members of CMICA and CoMPedIA concerning the application of skin prick tests. Aquestionnaire was sent in various occasions to all members of the Colegio Mexicano de Inmunologia Clinica y Alergia (CMICA) and of the Colegio Mexicano de Pediatras, Especialistas en Inmunologia y Alergia (CoMPedIA). The results are presented descriptively and by calculation of the frequency/percentages of intervals of replies, in the case of numerical responses. A response rate of 61 (17%) was obtained of the College members, showing consistency in some replies but a wide variation in others, for example in the time certain medication has to be suspended before the execution of the skin prick test. Comparing the replies obtained with recent recommendations in international publications, some discrepancy can be detected. In some aspects of the survey there is coincidence of the skin test practices among the participants; however, in other items there is an important variation.

Nano-hydroxyapatite and its applications in preventive, restorative and regenerative dentistry: a review of literature.

PubMed

Pepla, Erlind; Besharat, Lait Kostantinos; Palaia, Gaspare; Tenore, Gianluca; Migliau, Guido

2014-07-01

This study aims to critically summarize the literature about nano-hydroxyapatite. The purpose of this work is to analyze the benefits of using nano-hydroxyapatite in dentistry, especially for its preventive, restorative and regenerative applications. We also provide an overview of new dental materials, still experimental, which contain the nano-hydroxyapatite in its nano-crystalline form. Hydroxyapatite is one of the most studied biomaterials in the medical field for its proven biocompatibility and for being the main constituent of the mineral part of bone and teeth. In terms of restorative and preventive dentistry, nano-hydroxyapatite has significant remineralizing effects on initial enamel lesions, certainly superior to conventional fluoride, and good results on the sensitivity of the teeth. The nano-HA has also been used as an additive material, in order to improve already existing and widely used dental materials, in the restorative field (experimental addition to conventional glass ionomer cements, that has led to significant improvements in their mechanical properties). Because of its unique properties, such as the ability to chemically bond to bone, to not induce toxicity or inflammation and to stimulate bone growth through a direct action on osteoblasts, nano-HA has been widely used in periodontology and in oral and maxillofacial surgery. Its use in oral implantology, however, is a widely used practice established for years, as this substance has excellent osteoinductive capacity and improves bone-to-implant integration.

A generalized watershed disturbance-invertebrate relation applicable in a range of environmental settings across the continental United States

USGS Publications Warehouse

Steuer, Jeffrey J.

2010-01-01

It is widely recognized that urbanization can affect ecological conditions in aquatic systems; numerous studies have identified impervious surface cover as an indicator of urban intensity and as an index of development at the watershed, regional, and national scale. Watershed percent imperviousness, a commonly understood urban metric was used as the basis for a generalized watershed disturbance metric that, when applied in conjunction with weighted percent agriculture and percent grassland, predicted stream biotic conditions based on Ephemeroptera, Plecoptera, and Trichoptera (EPT) richness across a wide range of environmental settings. Data were collected in streams that encompassed a wide range of watershed area (4.4-1,714 km), precipitation (38-204 cm/yr), and elevation (31-2,024 m) conditions. Nevertheless the simple 3-landcover disturbance metric accounted for 58% of the variability in EPT richness based on the 261 nationwide sites. On the metropolitan area scale, relationship r ranged from 0.04 to 0.74. At disturbance values 15. Future work may incorporate watershed management practices within the disturbance metric, further increasing the management applicability of the relation. Such relations developed on a regional or metropolitan area scale are likely to be stronger than geographically generalized models; as found in these EPT richness relations. However, broad spatial models are able to provide much needed understanding in unmonitored areas and provide initial guidance for stream potential.

Developing expertise in surgery.

PubMed

Alderson, David

2010-01-01

The concept of expertise is widely embraced but poorly defined in surgery. Dictionary definitions differentiate between authority and experience, while a third view sees expertise as a mind-set rather than a status. Both absolute and relative models of expertise have been developed, and each allows a richer understanding of the application of these concepts to emerge. Trainees must develop both independent and interdependent expertise, and an appreciation of the essentially constructivist and uncertain nature of medical knowledge. Approach may be more important than innate talent; the concepts of 'flow', sustained 'deliberate practice' and 'adaptive expertise' are examples of expert approaches to learning. Non-analytical reasoning plays a key role in decision making at expert levels of practice. A technically gifted surgeon may be seen as a safety hazard rather than an expert if inter-dependent expertise has not been developed. Key roles of a surgical educator are to facilitate the development of an expert approach to education and to enable entry into and movement towards the centre of an expert community of practice.

A Practical Approach to Governance and Optimization of Structured Data Elements.

PubMed

Collins, Sarah A; Gesner, Emily; Morgan, Steven; Mar, Perry; Maviglia, Saverio; Colburn, Doreen; Tierney, Diana; Rocha, Roberto

2015-01-01

Definition and configuration of clinical content in an enterprise-wide electronic health record (EHR) implementation is highly complex. Sharing of data definitions across applications within an EHR implementation project may be constrained by practical limitations, including time, tools, and expertise. However, maintaining rigor in an approach to data governance is important for sustainability and consistency. With this understanding, we have defined a practical approach for governance of structured data elements to optimize data definitions given limited resources. This approach includes a 10 step process: 1) identification of clinical topics, 2) creation of draft reference models for clinical topics, 3) scoring of downstream data needs for clinical topics, 4) prioritization of clinical topics, 5) validation of reference models for clinical topics, and 6) calculation of gap analyses of EHR compared against reference model, 7) communication of validated reference models across project members, 8) requested revisions to EHR based on gap analysis, 9) evaluation of usage of reference models across project, and 10) Monitoring for new evidence requiring revisions to reference model.

Recommendations for toxicological investigation of drug-impaired driving and motor vehicle fatalities.

PubMed

Logan, Barry K; Lowrie, Kayla J; Turri, Jennifer L; Yeakel, Jillian K; Limoges, Jennifer F; Miles, Amy K; Scarneo, Colleen E; Kerrigan, Sarah; Farrell, Laurel J

2013-10-01

This report describes the review and update of a set of minimum recommendations for the toxicological investigation of suspected alcohol and drug-impaired driving cases and motor vehicle fatalities involving drugs or alcohol. The recommendations have the goal of ensuring that a consistent set of data regarding the most frequently encountered drugs linked to driving impairment is collected for practical application in the investigation of these cases and to allow epidemiological monitoring and the development of evidence-based public policy on this important public safety issue. The recommendations are based on a survey of practices in US laboratories performing this kind of analysis, consideration of existing epidemiological crash and arrest data and practical considerations of widely available technology platforms in laboratories performing this work. The final recommendations were derived from a consensus meeting of experts recruited from survey respondents and the membership of the National Safety Council's Alcohol, Drug and Impairment Division (formerly known as the Committee on Alcohol and Other Drugs, CAOD).

Driving with roadmaps and dashboards: using information resources to structure the decision models in service organizations.

PubMed

Chorpita, Bruce F; Bernstein, Adam; Daleiden, Eric L

2008-03-01

This paper illustrates the application of design principles for tools that structure clinical decision-making. If the effort to implement evidence-based practices in community services organizations is to be effective, attention must be paid to the decision-making context in which such treatments are delivered. Clinical research trials commonly occur in an environment characterized by structured decision making and expert supports. Technology has great potential to serve mental health organizations by supporting these potentially important contextual features of the research environment, through organization and reporting of clinical data into interpretable information to support decisions and anchor decision-making procedures. This article describes one example of a behavioral health reporting system designed to facilitate clinical and administrative use of evidence-based practices. The design processes underlying this system-mapping of decision points and distillation of performance information at the individual, caseload, and organizational levels-can be implemented to support clinical practice in a wide variety of settings.

Conservation genomics of natural and managed populations: building a conceptual and practical framework.

PubMed

Benestan, Laura Marilyn; Ferchaud, Anne-Laure; Hohenlohe, Paul A; Garner, Brittany A; Naylor, Gavin J P; Baums, Iliana Brigitta; Schwartz, Michael K; Kelley, Joanna L; Luikart, Gordon

2016-07-01

The boom of massive parallel sequencing (MPS) technology and its applications in conservation of natural and managed populations brings new opportunities and challenges to meet the scientific questions that can be addressed. Genomic conservation offers a wide range of approaches and analytical techniques, with their respective strengths and weaknesses that rely on several implicit assumptions. However, finding the most suitable approaches and analysis regarding our scientific question are often difficult and time-consuming. To address this gap, a recent workshop entitled 'ConGen 2015' was held at Montana University in order to bring together the knowledge accumulated in this field and to provide training in conceptual and practical aspects of data analysis applied to the field of conservation and evolutionary genomics. Here, we summarize the expertise yield by each instructor that has led us to consider the importance of keeping in mind the scientific question from sampling to management practices along with the selection of appropriate genomics tools and bioinformatics challenges. © 2016 John Wiley & Sons Ltd.

Mission Applications Support at NASA: The Proposal Surface Water and Ocean Topography Mission

NASA Astrophysics Data System (ADS)

Srinivasan, Margaret; Peterson, Craig; Callahan, Phil

2013-09-01

The NASA Applied Sciences Program is actively supporting an agency-wide effort to formalize a mission-level data applications approach. The program goal is to engage early-phase NASA Earth satellite mission project teams with applied science representation in the flight mission planning process. The end objective is to "to engage applications-oriented users and organizations early in the satellite mission lifecycle to enable them to envision possible applications and integrate end-user needs into satellite mission planning as a way to increase the benefits to the nation."Two mission applications representatives have been selected for each early phase Tier 2 mission, including the Surface Water and Ocean Topography (SWOT) mission concept. These representatives are tasked with identifying and organizing the applications communities and developing and promoting a process for the mission to optimize the reach of existing applications efforts in order to enhance the applications value of the missions. An early project-level awareness of mission planning decisions that may increase or decrease the utility of data products to diverse user and potential user communities (communities of practice and communities of potential, respectively) has high value and potential return to the mission and to the users.Successful strategies to enhance science and practical applications of projected SWOT data streams will require engaging with and facilitating between representatives in the science, societal applications, and mission planning communities.Some of the elements of this program include:• Identify early adopters of data products• Coordinate applications team, including;Project Scientist, Payload Scientist, ProjectManager, data processing lead• Describe mission and products sufficiently inearly stage of development to effectively incorporate all potential usersProducts and activities resulting from this effort will include (but are not limited to); workshops, workshop summaries, web pages, email lists of interested users/scientists, an Applications Plan, printed materials (posters, brochures) and participation in key meetings.

Local Perceptions, Cultural Beliefs and Practices That Shape Umbilical Cord Care: A Qualitative Study in Southern Province, Zambia

PubMed Central

Herlihy, Julie M.; Shaikh, Affan; Mazimba, Arthur; Gagne, Natalie; Grogan, Caroline; Mpamba, Chipo; Sooli, Bernadine; Simamvwa, Grace; Mabeta, Catherine; Shankoti, Peggy; Messersmith, Lisa; Semrau, Katherine; Hamer, Davidson H.

2013-01-01

Background Global policy regarding optimal umbilical cord care to prevent neonatal illness is an active discussion among researchers and policy makers. In preparation for a large cluster-randomized control trial to measure the impact of 4% chlorhexidine as an umbilical wash versus dry cord care on neonatal mortality in Southern Province, Zambia, we performed a qualitative study to determine local perceptions of cord health and illness and the cultural belief system that shapes umbilical cord care knowledge, attitudes, and practices. Methods and Findings This study consisted of 36 focus group discussions with breastfeeding mothers, grandmothers, and traditional birth attendants, and 42 in-depth interviews with key community informants. Semi-structured field guides were used to lead discussions and interviews at urban and rural sites. A wide variation in knowledge, beliefs, and practices surrounding cord care was discovered. For home deliveries, cords were cut with non-sterile razor blades or local grass. Cord applications included drying agents (e.g., charcoal, baby powder, dust), lubricating agents (e.g., Vaseline, cooking oil, used motor oil) and agents intended for medicinal/protective purposes (e.g., breast milk, cow dung, chicken feces). Concerns regarding the length of time until cord detachment were universally expressed. Blood clots in the umbilical cord, bulongo-longo, were perceived to foreshadow neonatal illness. Management of bulongo-longo or infected umbilical cords included multiple traditional remedies and treatment at government health centers. Conclusion Umbilical cord care practices and beliefs were diverse. Dry cord care, as recommended by the World Health Organization at the time of the study, is not widely practiced in Southern Province, Zambia. A cultural health systems model that depicts all stakeholders is proposed as an approach for policy makers and program implementers to work synergistically with existing cultural beliefs and practices in order to maximize effectiveness of evidence-based interventions. PMID:24244447

How valuable is physical examination of the cardiovascular system?

PubMed

Elder, Andrew; Japp, Alan; Verghese, Abraham

2016-07-27

Physical examination of the cardiovascular system is central to contemporary teaching and practice in clinical medicine. Evidence about its value focuses on its diagnostic accuracy and varies widely in methodological quality and statistical power. This makes collation, analysis, and understanding of results difficult and limits their application to daily clinical practice. Specific factors affecting interpretation and clinical application include poor standardisation of observers' technique and training, the study of single signs rather than multiple signs or signs in combination with symptoms, and the tendency to compare physical examination directly with technological aids to diagnosis rather than explore diagnostic strategies that combine both. Other potential aspects of the value of physical examination, such as cost effectiveness or patients' perceptions, are poorly studied. This review summarises the evidence for the clinical value of physical examination of the cardiovascular system. The best was judged to relate to the detection and evaluation of valvular heart disease, the diagnosis and treatment of heart failure, the jugular venous pulse in the assessment of central venous pressure, and the detection of atrial fibrillation, peripheral arterial disease, impaired perfusion, and aortic and carotid disease. Although technological aids to diagnosis are likely to become even more widely available at the point of care, the evidence suggests that further research into the value of physical examination of the cardiovascular system is needed, particularly in low resource settings and as a potential means of limiting inappropriate overuse of technological aids to diagnosis. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

A review of peer-assisted learning to deliver interprofessional supplementary image interpretation skills.

PubMed

Bain, P; Wareing, A; Henderson, I

2017-09-01

Peer-assisted learning provides a means through which individuals can learn from one another through a reciprocal process. Radiographic image interpretation skills are fundamental to both diagnostic radiography students and medical students due to their shared role in preliminary evaluation of conventional radiographic images. Medical students on graduation, may not be well prepared to carry out image interpretation, since evidence suggests that they perform less well than radiographers in e.g. Accident and Emergency situations. A review of literature was conducted exploring the application of peer-assisted learning within diagnostic radiography and health education more widely as well as the practice of initial image interpretation. An extensive and systematic search strategy was developed which provided a range of material related to the areas. An overview was obtained of the effectiveness of peer-assisted learning and the issues associated with development of image interpretation skills and a degree of discrepancy was identified between the two cohorts regarding their interpretative competence and confidence. This inconsistency may create an opportunity to apply peer-assisted learning, better preparing both disciplines for the practical application of image interpretation skills. The review identified the lack of a substantial evidence base relating to peer-assisted learning in radiography. Peer-assisted learning is not widely embraced in an interprofessional context. Multiple positive factors of such an intervention are identified which outweigh perceived negative issues. Student teacher and learner may benefit as should the clinical service from enhanced practitioner performance. The findings justify further research to develop the evidence base. Copyright © 2017 The College of Radiographers. Published by Elsevier Ltd. All rights reserved.

One-step fabrication of multifunctional micromotors

NASA Astrophysics Data System (ADS)

Gao, Wenlong; Liu, Mei; Liu, Limei; Zhang, Hui; Dong, Bin; Li, Christopher Y.

2015-08-01

Although artificial micromotors have undergone tremendous progress in recent years, their fabrication normally requires complex steps or expensive equipment. In this paper, we report a facile one-step method based on an emulsion solvent evaporation process to fabricate multifunctional micromotors. By simultaneously incorporating various components into an oil-in-water droplet, upon emulsification and solidification, a sphere-shaped, asymmetric, and multifunctional micromotor is formed. Some of the attractive functions of this model micromotor include autonomous movement in high ionic strength solution, remote control, enzymatic disassembly and sustained release. This one-step, versatile fabrication method can be easily scaled up and therefore may have great potential in mass production of multifunctional micromotors for a wide range of practical applications.Although artificial micromotors have undergone tremendous progress in recent years, their fabrication normally requires complex steps or expensive equipment. In this paper, we report a facile one-step method based on an emulsion solvent evaporation process to fabricate multifunctional micromotors. By simultaneously incorporating various components into an oil-in-water droplet, upon emulsification and solidification, a sphere-shaped, asymmetric, and multifunctional micromotor is formed. Some of the attractive functions of this model micromotor include autonomous movement in high ionic strength solution, remote control, enzymatic disassembly and sustained release. This one-step, versatile fabrication method can be easily scaled up and therefore may have great potential in mass production of multifunctional micromotors for a wide range of practical applications. Electronic supplementary information (ESI) available: Videos S1-S4 and Fig. S1-S3. See DOI: 10.1039/c5nr03574k

Review on SAW RFID tags.

PubMed

Plessky, Victor P; Reindl, Leonhard M

2010-03-01

SAW tags were invented more than 30 years ago, but only today are the conditions united for mass application of this technology. The devices in the 2.4-GHz ISM band can be routinely produced with optical lithography, high-resolution radar systems can be built up using highly sophisticated, but low-cost RF-chips, and the Internet is available for global access to the tag databases. The "Internet of Things," or I-o-T, will demand trillions of cheap tags and sensors. The SAW tags can overcome semiconductor-based analogs in many aspects: they can be read at a distance of a few meters with readers radiating power levels 2 to 3 orders lower, they are cheap, and they can operate in robust environments. Passive SAW tags are easily combined with sensors. Even the "anti-collision" problem (i.e., the simultaneous reading of many nearby tags) has adequate solutions for many practical applications. In this paper, we discuss the state-of-the-art in the development of SAW tags. The design approaches will be reviewed and optimal tag designs, as well as encoding methods, will be demonstrated. We discuss ways to reduce the size and cost of these devices. A few practical examples of tags using a time-position coding with 10(6) different codes will be demonstrated. Phase-coded devices can additionally increase the number of codes at the expense of a reduction of reading distance. We also discuss new and exciting perspectives of using ultra wide band (UWB) technology for SAW-tag systems. The wide frequency band available for this standard provides a great opportunity for SAW tags to be radically reduced in size to about 1 x 1 mm(2) while keeping a practically infinite number of possible different codes. Finally, the reader technology will be discussed, as well as detailed comparison made between SAW tags and IC-based semiconductor device.

A Practical Protocol for Situating Evidence-Based Mental Health Programs and Practices within School-Wide Positive Behavioral Interventions and Supports

ERIC Educational Resources Information Center

Runge, Timothy J.; Knoster, Timothy P.; Moerer, Deanna; Breinich, Todd; Palmiero, James

2017-01-01

Schools have limited experience and little guidance to identify and install evidence-based and promising programs and practices/interventions (EBPs) within advanced tiers of School-Wide Positive Behavioral Intervention and Supports (SWPBIS). One form of guidance is the Hexagon Tool which can be used to ensure a match between the EBP and student…

Pragmatic ethical basis for radiation protection in diagnostic radiology.

PubMed

Malone, Jim; Zölzer, Friedo

2016-01-01

Medical ethics has a tried and tested literature and a global active research community. Even among health professionals, literate and fluent in medical ethics, there is low recognition of radiation protection principles such as justification and optimization. On the other hand, many in healthcare environments misunderstand dose limitation obligations and incorrectly believe patients are protected by norms including a dose limit. Implementation problems for radiation protection in medicine possibly flow from apparent inadequacies of the International Commission on Radiological Protection (ICRP) principles taken on their own, coupled with their failure to transfer successfully to the medical world. Medical ethics, on the other hand, is essentially global, is acceptable in most cultures, is intuitively understood in hospitals, and its expectations are monitored, even by managements. This article presents an approach to ethics in diagnostic imaging rooted in the medical tradition, and alert to contemporary social expectations. ICRP and the International Radiation Protection Association (IRPA), both alert to growing ethical concerns, organized a series of consultations on ethics for general radiation protection in the last few years. The literature on medical ethics and implicit ICRP ethical values were reviewed qualitatively, with a view to identifying a system that will help guide contemporary behaviour in radiation protection of patients. Application of the system is illustrated in six clinical scenarios. The proposed system is designed, as far as is possible, so as not to be in conflict with the conclusions emerging from the ICRP/IRPA consultations. A widely recognized and well-respected system of medical ethics was identified that has global reach and claims acceptance in all cultures. Three values based on this system are grouped with two additional values to provide an ethical framework for application in diagnostic imaging. This system has the potential to be robust and to reach conclusions that are in accord with contemporary medical, social and ethical thinking. The system is not intended to replace the ICRP principles. Rather, it is intended as a well-informed interim approach that will help judge and analyse situations that arouse ethical concerns in radiology. Six scenarios illustrate the practicality of the value system in alerting one to possible deficits in practice. Five widely recognized values and the basis for them are identified to support the contemporary practice of diagnostic radiology. These are essential to complement the widely used ICRP principles pending further development in the area.

Ten Commandments Revisited: A Ten-Year Perspective on the Industrial Application of Formal Methods

NASA Technical Reports Server (NTRS)

Bowen, Jonathan P.; Hinchey, Michael G.

2005-01-01

Ten years ago, our 1995 paper Ten Commandments of Formal Methods suggested some guidelines to help ensure the success of a formal methods project. It proposed ten important requirements (or "commandments") for formal developers to consider and follow, based on our knowledge of several industrial application success stories, most of which have been reported in more detail in two books. The paper was surprisingly popular, is still widely referenced, and used as required reading in a number of formal methods courses. However, not all have agreed with some of our commandments, feeling that they may not be valid in the long-term. We re-examine the original commandments ten years on, and consider their validity in the light of a further decade of industrial best practice and experiences.

Delivering spacecraft control centers with embedded knowledge-based systems: The methodology issue

NASA Technical Reports Server (NTRS)

Ayache, S.; Haziza, M.; Cayrac, D.

1994-01-01

Matra Marconi Space (MMS) occupies a leading place in Europe in the domain of satellite and space data processing systems. The maturity of the knowledge-based systems (KBS) technology, the theoretical and practical experience acquired in the development of prototype, pre-operational and operational applications, make it possible today to consider the wide operational deployment of KBS's in space applications. In this perspective, MMS has to prepare the introduction of the new methods and support tools that will form the basis of the development of such systems. This paper introduces elements of the MMS methodology initiatives in the domain and the main rationale that motivated the approach. These initiatives develop along two main axes: knowledge engineering methods and tools, and a hybrid method approach for coexisting knowledge-based and conventional developments.

Bayesian semiparametric estimation of covariate-dependent ROC curves

PubMed Central

Rodríguez, Abel; Martínez, Julissa C.

2014-01-01

Receiver operating characteristic (ROC) curves are widely used to measure the discriminating power of medical tests and other classification procedures. In many practical applications, the performance of these procedures can depend on covariates such as age, naturally leading to a collection of curves associated with different covariate levels. This paper develops a Bayesian heteroscedastic semiparametric regression model and applies it to the estimation of covariate-dependent ROC curves. More specifically, our approach uses Gaussian process priors to model the conditional mean and conditional variance of the biomarker of interest for each of the populations under study. The model is illustrated through an application to the evaluation of prostate-specific antigen for the diagnosis of prostate cancer, which contrasts the performance of our model against alternative models. PMID:24174579

Advances in Fabrication Materials of Honeycomb Structure Films by the Breath-Figure Method

PubMed Central

Heng, Liping; Wang, Bin; Li, Muchen; Zhang, Yuqi; Jiang, Lei

2013-01-01

Creatures in nature possess almost perfect structures and properties, and exhibit harmonization and unification between structure and function. Biomimetics, mimicking nature for engineering solutions, provides a model for the development of functional surfaces with special properties. Recently, honeycomb structure materials have attracted wide attention for both fundamental research and practical applications and have become an increasingly hot research topic. Though progress in the field of breath-figure formation has been reviewed, the advance in the fabrication materials of bio-inspired honeycomb structure films has not been discussed. Here we review the recent progress of honeycomb structure fabrication materials which were prepared by the breath-figure method. The application of breath figures for the generation of all kinds of honeycomb is discussed. PMID:28809319

a Modeling Method of Fluttering Leaves Based on Point Cloud

NASA Astrophysics Data System (ADS)

Tang, J.; Wang, Y.; Zhao, Y.; Hao, W.; Ning, X.; Lv, K.; Shi, Z.; Zhao, M.

2017-09-01

Leaves falling gently or fluttering are common phenomenon in nature scenes. The authenticity of leaves falling plays an important part in the dynamic modeling of natural scenes. The leaves falling model has a widely applications in the field of animation and virtual reality. We propose a novel modeling method of fluttering leaves based on point cloud in this paper. According to the shape, the weight of leaves and the wind speed, three basic trajectories of leaves falling are defined, which are the rotation falling, the roll falling and the screw roll falling. At the same time, a parallel algorithm based on OpenMP is implemented to satisfy the needs of real-time in practical applications. Experimental results demonstrate that the proposed method is amenable to the incorporation of a variety of desirable effects.

[Reasonable and safe application of Shuxuetong injection and intravenous medication's combined application in acute cerebral infarction's therapy].

PubMed

Li, Ming-Quan; Xie, Yan-Ming; Zhao, Jian-Jun

2012-09-01

Shuxuetong injection is a kind of compound injection which is made from traditional Chinese medicine Hirudo and Pheretime, which has a clear anticoagulant, fibrinolytic promoting, blood rheology improving, blood lipids regulating and cell protecting effect, and the injection has been widely used in clinical. Especially, the injection has often been combined with other Chinese and modern medicine in the treatment of cerebral infarction disease. However, there are still many non-standard and irrational aspects in clinical practice so as to make a more reasonable and safer use of Shuxuetong injection. In order to avoid the occurrence of adverse reactions to provide a reference for regulating the use of the injection,the paper systematically expounds the Shuxuetong injection's main clinical problems and the reasonable combination.

Molecular epidemiology, and possible real-world applications in breast cancer.

PubMed

Ito, Hidemi; Matsuo, Keitaro

2016-01-01

Gene-environment interaction, a key idea in molecular epidemiology, has enabled the development of personalized medicine. This concept includes personalized prevention. While genome-wide association studies have identified a number of genetic susceptibility loci in breast cancer risk, however, the application of this knowledge to practical prevention is still underway. Here, we briefly review the history of molecular epidemiology and its progress in breast cancer epidemiology. We then introduce our experience with the trial combination of GWAS-identified loci and well-established lifestyle and reproductive risk factors in the risk prediction of breast cancer. Finally, we report our exploration of the cumulative risk of breast cancer based on this risk prediction model as a potential tool for individual risk communication, including genetic risk factors and gene-environment interaction with obesity.

Storm surge modeling and applications in coastal areas

USGS Publications Warehouse

Dube, Shisir K.; Murty, Tad S.; Feyen, Jesse C.; Cabrera, Reggina; Harper, Bruce A.; Bales, Jerad D.; Amer, Saud A.

2010-01-01

This chapter introduces the reader to a wide spectrum of storm surge modeling systems used to assess the impact of tropical cyclones, covering a range of numerical methods, model domains, forcing and boundary conditions, and purposes. New technologies to obtain data such as deployment of temporary sensors and remote sensing practices to support modeling are also presented. Extensive storm surge modeling applications have been made with existing modeling systems and some of them are described in this chapter.The authors recognize the importance of evaluating river-ocean interactions in coastal environments during tropical cyclones. Therefore, the coupling of hydraulic (riverine) and storm surge models is discussed. In addition, results from studies performed in the coast of India are shown which generated maps to help emergency managers and reduce risk due to coastal inundation.

Echocardiography Practice: Insights into Appropriate Clinical Use, Technical Competence and Quality Improvement Program

PubMed Central

Kossaify, Antoine; Grollier, Gilles

2014-01-01

Echocardiography accounts for nearly half of all cardiac imaging techniques. It is a widely available and adaptable tool, as well as being a cost-effective and mainly a non-invasive test. In addition, echocardiography provides extensive clinical data, which is related to the presence or advent of different modalities (tissue Doppler imaging, speckle tracking imaging, three-dimensional mode, contrast echo, etc.), different approaches (transesophageal, intravascular, etc.), and different applications (ie, heart failure/resynchronization studies, ischemia/stress echo, etc.). In view of this, it is essential to conform to criteria of appropriate use and to keep standards of competence. In this study, we sought to review and discuss clinical practice of echocardiography in light of the criteria of appropriate clinical use, also we present an insight into echocardiographic technical competence and quality improvement project. PMID:24516342

WHC significant lessons learned 1993--1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bickford, J.C.

1997-12-12

A lesson learned as defined in DOE-STD-7501-95, Development of DOE Lessons Learned Programs, is: A ``good work practice`` or innovative approach that is captured and shared to promote repeat applications or an adverse work practice or experience that is captured and shared to avoid a recurrence. The key word in both parts of this definition is ``shared``. This document was published to share a wide variety of recent Hanford experiences with other DOE sites. It also provides a valuable tool to be used in new employee and continuing training programs at Hanford facilities and at other DOE locations. This manualmore » is divided into sections to facilitate extracting appropriate subject material when developing training modules. Many of the bulletins could be categorized into more than one section, however, so examination of other related sections is encouraged.« less

Gardens of paradise.

PubMed

Müller-Wille, S

2001-06-01

Two hundred and fifty years ago, the Swedish naturalist Carolus Linnaeus (1707-1778) published his Philosophia botanica. This textbook in botanical science was widely read well into the 19th century. Today it is remembered mainly for two things: the introduction of binomial nomenclature and the formulation of a fixist and creationist species concept. While the former achievement is seen as a practical tool, still applicable for purposes of identification and information retrieval, the latter is usually deemed to have been one of the main obstacles to scientific progress in biology. That both achievements were not independent of each other, but interlocked theoretically and grounded in a specific scientific practice still thriving today--the collection of plant specimens in botanical gardens--is usually overlooked. The following article tries to uncover these connections and to demonstrate the significance that Linnaeus' achievements had for modern biology.

Flow/Soot-Formation Interactions in Nonbuoyant Laminar Diffusion Flames

NASA Technical Reports Server (NTRS)

Dai, Z.; Lin, K.-C.; Sunderland, P. B.; Xu, F.; Faeth, G. M.

2002-01-01

This is the final report of a research program considering interactions between flow and soot properties within laminar diffusion flames. Laminar diffusion flames were considered because they provide model flame systems that are far more tractable for theoretical and experimental studies than more practical turbulent diffusion flames. In particular, understanding the transport and chemical reaction processes of laminar flames is a necessary precursor to understanding these processes in practical turbulent flames and many aspects of laminar diffusion flames have direct relevance to turbulent diffusion flames through application of the widely recognized laminar flamelet concept of turbulent diffusion flames. The investigation was divided into three phases, considering the shapes of nonbuoyant round laminar jet diffusion flames in still air, the shapes of nonbuoyant round laminar jet diffusion flames in coflowing air, and the hydrodynamic suppression of soot formation in laminar diffusion flames.

A Practical Clinical Approach to Diagnosis of Fetal Alcohol Spectrum Disorders: Clarification of the 1996 Institute of Medicine Criteria

PubMed Central

Eugene Hoyme, H.; May, Philip A.; Kalberg, Wendy O.; Kodituwakku, Piyadasa; Phillip Gossage, J.; Trujillo, Phyllis M.; Buckley, David G.; Miller, Joseph H.; Aragon, Alfredo S.; Khaole, Nathaniel; Viljoen, Denis L.; Jones, Kenneth Lyons; Robinson, Luther K.

2006-01-01

Background. The adverse effects of alcohol on the developing human represent a spectrum of structural anomalies and behavioral and neurocognitive disabilities, most accurately termed fetal alcohol spectrum disorders (FASD). The first descriptions in the modern medical literature of a distinctly recognizable pattern of malformations associated with maternal alcohol abuse were reported in 1968 and 1973. Since that time, substantial progress has been made in developing specific criteria for defining and diagnosing this condition. Two sets of diagnostic criteria are now used most widely for evaluation of children with potential diagnoses in the FASD continuum, ie, the 1996 Institute of Medicine (IOM) criteria and the Washington criteria. Although both approaches have improved the clinical delineation of FASD, both suffer from significant drawbacks in their practical application in pediatric practice. Objective. The purpose of this report is to present specific clarifications of the 1996 IOM criteria for the diagnosis of FASD, to facilitate their practical application in clinical pediatric practice. Methods. A large cohort of children who were prenatally exposed to alcohol were identified, through active case-ascertainment methods, in 6 Native American communities in the United States and 1 community in the Western Cape Province of South Africa. The children and their families underwent standardized multidisciplinary evaluations, including a dysmorphology examination, developmental and neuropsychologic testing, and a structured maternal interview, which gathered data about prenatal drinking practices and other demographic and family information. Data for these subjects were analyzed, and revisions and clarifications of the existing IOM FASD diagnostic categories were formulated on the basis of the results. Results. The revised IOM method defined accurately and completely the spectrum of disabilities among the children in our study. On the basis of this experience, we propose specific diagnostic criteria for fetal alcohol syndrome and partial fetal alcohol syndrome. We also define alcohol-related birth defects and alcohol-related neurodevelopmental disorder from a practical standpoint. Conclusions. The 1996 IOM criteria remain the most appropriate diagnostic approach for children prenatally exposed to alcohol. The proposed revisions presented here make these criteria applicable in clinical pediatric practice. Pediatrics 2005;115:39–47; fetal alcohol syndrome, fetal alcohol spectrum disorders, diagnostic criteria, mental retardation, developmental disabilities. PMID:15629980

Web-based classroom data collection in ADHD: a best practices case study.

PubMed

Bhatara, Vinod; Vogt, H Bruce; Ellis, Roland; Alshari, Ghyath; Patrick, Sarah

2003-09-01

Best practices research identifies and disseminates effective clinical strategies developed and refined by clinicians for their practices. As opposed to the content of health care, medical students and residents are typically not trained in the process of its provision. This paper illustrates a best practices approach to development of a Web-based classroom data collection method to improve medication management in attention deficit hyperactivity disorder (ADHD). 1) To increase Primary Care Physician (PCP) awareness of the process of best practices research, and; 2) to highlight the use of the World Wide Web as a tool for integration of care of children with ADHD. Based on the review of a large national study in ADHD, the key ingredients for the best pharmacotherapy practices were identified. The lessons from the literature were adapted for local practice using the framework and steps for best practices outlined by Mold and Gregory. A conceptual model of managing information provided by parents/caregivers and teachers to PCPs was developed. Several steps were identified, including Web-based classroom behavioral data collection by a care manager and feedback reports to PCPs from a child psychiatrist based on the data collected. This model is currently being tested. Our preliminary experience suggests that a best practices approach has potential applications to a variety of primary care settings in South Dakota. We encourage PCPs to consider best practice strategies for their own practices. The practice-based research network (Rush Net) being developed by the Center for Rural Health Improvement of the University of South Dakota School of Medicine's Department of Family Medicine can be helpful in this regard.

Radiation sensors for medical, industrial and environmental applications: how to engage with schools and the general public

NASA Astrophysics Data System (ADS)

Seitz, B.; Campos Rivera, N.; Gray, R.; Powell, A.; Thomson, F.

2018-01-01

Radiation, radiation detection and radiation protection are topics in physics and its applications which generate a wide interest in the public. This interest is either generated through medical procedures, applications of nuclear energy or nuclear accidents. The technical nature of these topics usually means that they are not well covered in the normal education stream, opening many opportunities to engage with schools and the general public to showcase the latest developments and their applications. The detection of radiation is at the very heart of understanding radiation, its fascination and associated fears. The outreach group of the nuclear physics group at the University of Glasgow demonstrates a number of successful outreach activities centred around radiation detection and described in this paper, focusing on activities delivered to a variety of audiences and related to applied nuclear physics work within our group. These concentrate on the application of novel sensor technologies for nuclear decommissioning, medical imaging modalities and the monitoring of environmental radioactivity. The paper will provide some necessary background material as well as practical instructions for some of the activities developed.

Photoacoustic Analysis of the Penetration Kinetics of Cordia verbenacea DC in Human Skin

NASA Astrophysics Data System (ADS)

Carvalho, S. S.; Barja, P. R.

2012-11-01

Phonophoresis consists of the utilization of ultrasound radiation associated to pharmacological agents in order to enhance transdermal penetration of applied drugs. It is a widely employed resource in physiotherapy practice, normally associated with anti-inflammatory drugs, such as Acheflan. This drug was developed in Brazil from the essential oil of Cordia verbenacea DC, a native plant of the Brazilian southern coast. In previous studies, the photoacoustic (PA) technique proved effective in the study of the penetration kinetics of topically applied products and in the evaluation of drug delivery after phonophoresis application. The present work aimed to evaluate the penetration kinetics of Acheflan in human skin, employing in vivo PA measurements after massage application or phonophoresis application. Ten volunteers (aged between 18 and 30 years) took part in the study. Time evolution of the PA signal was fitted to a Boltzmann curve, S-shaped. After statistical analysis, PA measurements have shown drug penetration for both application forms, but drug delivery was more evident after phonophoresis application, with a characteristic penetration time of less than 15 min for the stratum corneum.

Biomolecular logic systems: applications to biosensors and bioactuators

NASA Astrophysics Data System (ADS)

Katz, Evgeny

2014-05-01

The paper presents an overview of recent advances in biosensors and bioactuators based on the biocomputing concept. Novel biosensors digitally process multiple biochemical signals through Boolean logic networks of coupled biomolecular reactions and produce output in the form of YES/NO response. Compared to traditional single-analyte sensing devices, biocomputing approach enables a high-fidelity multi-analyte biosensing, particularly beneficial for biomedical applications. Multi-signal digital biosensors thus promise advances in rapid diagnosis and treatment of diseases by processing complex patterns of physiological biomarkers. Specifically, they can provide timely detection and alert to medical emergencies, along with an immediate therapeutic intervention. Application of the biocomputing concept has been successfully demonstrated for systems performing logic analysis of biomarkers corresponding to different injuries, particularly exemplified for liver injury. Wide-ranging applications of multi-analyte digital biosensors in medicine, environmental monitoring and homeland security are anticipated. "Smart" bioactuators, for example for signal-triggered drug release, were designed by interfacing switchable electrodes and biocomputing systems. Integration of novel biosensing and bioactuating systems with the biomolecular information processing systems keeps promise for further scientific advances and numerous practical applications.

High Power High Efficiency Diode Laser Stack for Processing

NASA Astrophysics Data System (ADS)

Gu, Yuanyuan; Lu, Hui; Fu, Yueming; Cui, Yan

2018-03-01

High-power diode lasers based on GaAs semiconductor bars are well established as reliable and highly efficient laser sources. As diode laser is simple in structure, small size, longer life expectancy with the advantages of low prices, it is widely used in the industry processing, such as heat treating, welding, hardening, cladding and so on. Respectively, diode laser could make it possible to establish the practical application because of rectangular beam patterns which are suitable to make fine bead with less power. At this power level, it can have many important applications, such as surgery, welding of polymers, soldering, coatings and surface treatment of metals. But there are some applications, which require much higher power and brightness, e.g. hardening, key hole welding, cutting and metal welding. In addition, High power diode lasers in the military field also have important applications. So all developed countries have attached great importance to high-power diode laser system and its applications. This is mainly due their low performance. In this paper we will introduce the structure and the principle of the high power diode stack.

Application of identifying transmission spheres for spherical surface testing

NASA Astrophysics Data System (ADS)

Han, Christopher B.; Ye, Xin; Li, Xueyuan; Wang, Quanzhao; Tang, Shouhong; Han, Sen

2017-06-01

We developed a new application on Microsoft Foundation Classes (MFC) to identify correct transmission spheres (TS) for Spherical Surface Testing (SST). Spherical surfaces are important optical surfaces, and the wide application and high production rate of spherical surfaces necessitates an accurate and highly reliable measuring device. A Fizeau Interferometer is an appropriate tool for SST due to its subnanometer accuracy. It measures the contour of a spherical surface using a common path, which is insensitive to the surrounding circumstances. The Fizeau Interferometer transmits a wide laser beam, creating interference fringes from re-converging light from the transmission sphere and the test surface. To make a successful measurement, the application calculates and determines the appropriate transmission sphere for the test surface. There are 3 main inputs from the test surfaces that are utilized to determine the optimal sizes and F-numbers of the transmission spheres: (1) the curvatures (concave or convex), (2) the Radii of Curvature (ROC), and (3) the aperture sizes. The application will firstly calculate the F-numbers (i.e. ROC divided by aperture) of the test surface, secondly determine the correct aperture size of a convex surface, thirdly verify that the ROC of the test surface must be shorter than the reference surface's ROC of the transmission sphere, and lastly calculate the percentage of area that the test surface will be measured. However, the amount of interferometers and transmission spheres should be optimized when measuring large spherical surfaces to avoid requiring a large amount of interferometers and transmission spheres for each test surface. Current measuring practices involve tedious and potentially inaccurate calculations. This smart application eliminates human calculation errors, optimizes the selection of transmission spheres (including the least number required) and interferometer sizes, and increases efficiency.

Recommendations for benefit-risk assessment methodologies and visual representations.

PubMed

Hughes, Diana; Waddingham, Ed; Mt-Isa, Shahrul; Goginsky, Alesia; Chan, Edmond; Downey, Gerald F; Hallgreen, Christine E; Hockley, Kimberley S; Juhaeri, Juhaeri; Lieftucht, Alfons; Metcalf, Marilyn A; Noel, Rebecca A; Phillips, Lawrence D; Ashby, Deborah; Micaleff, Alain

2016-03-01

The purpose of this study is to draw on the practical experience from the PROTECT BR case studies and make recommendations regarding the application of a number of methodologies and visual representations for benefit-risk assessment. Eight case studies based on the benefit-risk balance of real medicines were used to test various methodologies that had been identified from the literature as having potential applications in benefit-risk assessment. Recommendations were drawn up based on the results of the case studies. A general pathway through the case studies was evident, with various classes of methodologies having roles to play at different stages. Descriptive and quantitative frameworks were widely used throughout to structure problems, with other methods such as metrics, estimation techniques and elicitation techniques providing ways to incorporate technical or numerical data from various sources. Similarly, tree diagrams and effects tables were universally adopted, with other visualisations available to suit specific methodologies or tasks as required. Every assessment was found to follow five broad stages: (i) Planning, (ii) Evidence gathering and data preparation, (iii) Analysis, (iv) Exploration and (v) Conclusion and dissemination. Adopting formal, structured approaches to benefit-risk assessment was feasible in real-world problems and facilitated clear, transparent decision-making. Prior to this work, no extensive practical application and appraisal of methodologies had been conducted using real-world case examples, leaving users with limited knowledge of their usefulness in the real world. The practical guidance provided here takes us one step closer to a harmonised approach to benefit-risk assessment from multiple perspectives. Copyright © 2016 John Wiley & Sons, Ltd.

An Analysis Platform for Multiscale Hydrogeologic Modeling with Emphasis on Hybrid Multiscale Methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scheibe, Timothy D.; Murphy, Ellyn M.; Chen, Xingyuan

2015-01-01

One of the most significant challenges facing hydrogeologic modelers is the disparity between those spatial and temporal scales at which fundamental flow, transport and reaction processes can best be understood and quantified (e.g., microscopic to pore scales, seconds to days) and those at which practical model predictions are needed (e.g., plume to aquifer scales, years to centuries). While the multiscale nature of hydrogeologic problems is widely recognized, technological limitations in computational and characterization restrict most practical modeling efforts to fairly coarse representations of heterogeneous properties and processes. For some modern problems, the necessary level of simplification is such that modelmore » parameters may lose physical meaning and model predictive ability is questionable for any conditions other than those to which the model was calibrated. Recently, there has been broad interest across a wide range of scientific and engineering disciplines in simulation approaches that more rigorously account for the multiscale nature of systems of interest. In this paper, we review a number of such approaches and propose a classification scheme for defining different types of multiscale simulation methods and those classes of problems to which they are most applicable. Our classification scheme is presented in terms of a flow chart (Multiscale Analysis Platform or MAP), and defines several different motifs of multiscale simulation. Within each motif, the member methods are reviewed and example applications are discussed. We focus attention on hybrid multiscale methods, in which two or more models with different physics described at fundamentally different scales are directly coupled within a single simulation. Very recently these methods have begun to be applied to groundwater flow and transport simulations, and we discuss these applications in the context of our classification scheme. As computational and characterization capabilities continue to improve, we envision that hybrid multiscale modeling will become more common and may become a viable alternative to conventional single-scale models in the near future.« less

An analysis platform for multiscale hydrogeologic modeling with emphasis on hybrid multiscale methods.

PubMed

Scheibe, Timothy D; Murphy, Ellyn M; Chen, Xingyuan; Rice, Amy K; Carroll, Kenneth C; Palmer, Bruce J; Tartakovsky, Alexandre M; Battiato, Ilenia; Wood, Brian D

2015-01-01

One of the most significant challenges faced by hydrogeologic modelers is the disparity between the spatial and temporal scales at which fundamental flow, transport, and reaction processes can best be understood and quantified (e.g., microscopic to pore scales and seconds to days) and at which practical model predictions are needed (e.g., plume to aquifer scales and years to centuries). While the multiscale nature of hydrogeologic problems is widely recognized, technological limitations in computation and characterization restrict most practical modeling efforts to fairly coarse representations of heterogeneous properties and processes. For some modern problems, the necessary level of simplification is such that model parameters may lose physical meaning and model predictive ability is questionable for any conditions other than those to which the model was calibrated. Recently, there has been broad interest across a wide range of scientific and engineering disciplines in simulation approaches that more rigorously account for the multiscale nature of systems of interest. In this article, we review a number of such approaches and propose a classification scheme for defining different types of multiscale simulation methods and those classes of problems to which they are most applicable. Our classification scheme is presented in terms of a flowchart (Multiscale Analysis Platform), and defines several different motifs of multiscale simulation. Within each motif, the member methods are reviewed and example applications are discussed. We focus attention on hybrid multiscale methods, in which two or more models with different physics described at fundamentally different scales are directly coupled within a single simulation. Very recently these methods have begun to be applied to groundwater flow and transport simulations, and we discuss these applications in the context of our classification scheme. As computational and characterization capabilities continue to improve, we envision that hybrid multiscale modeling will become more common and also a viable alternative to conventional single-scale models in the near future. © 2014, National Ground Water Association.

Cheaper Adjoints by Reversing Address Computations

DOE PAGES

Hascoët, L.; Utke, J.; Naumann, U.

2008-01-01

The reverse mode of automatic differentiation is widely used in science and engineering. A severe bottleneck for the performance of the reverse mode, however, is the necessity to recover certain intermediate values of the program in reverse order. Among these values are computed addresses, which traditionally are recovered through forward recomputation and storage in memory. We propose an alternative approach for recovery that uses inverse computation based on dependency information. Address storage constitutes a significant portion of the overall storage requirements. An example illustrates substantial gains that the proposed approach yields, and we show use cases in practical applications.

University guide to NASA, 1993

NASA Technical Reports Server (NTRS)

1992-01-01

This guide provides brief descriptions of the two NASA Headquarters program offices through which NASA primarily funds universities, the Office of Space Science and Applications and the Office of Aeronautics and Space Technology. It also describes NASA's Office of Commercial Programs, which funds the Centers for the Commercial Development of Space and the Small Business Innovation Research Program. This guide explains the roles played by NASA's eight field centers and the Jet Propulsion Laboratory, and gives a sampling of ongoing NASA-wide educational programs and services. Most importantly, this guide provides practical information in the form of names and telephone numbers of NASA contacts.

On the security of a novel probabilistic signature based on bilinear square Diffie-Hellman problem and its extension.

PubMed

Zhao, Zhenguo; Shi, Wenbo

2014-01-01

Probabilistic signature scheme has been widely used in modern electronic commerce since it could provide integrity, authenticity, and nonrepudiation. Recently, Wu and Lin proposed a novel probabilistic signature (PS) scheme using the bilinear square Diffie-Hellman (BSDH) problem. They also extended it to a universal designated verifier signature (UDVS) scheme. In this paper, we analyze the security of Wu et al.'s PS scheme and UDVS scheme. Through concrete attacks, we demonstrate both of their schemes are not unforgeable. The security analysis shows that their schemes are not suitable for practical applications.

Construction of databases: advances and significance in clinical research.

PubMed

Long, Erping; Huang, Bingjie; Wang, Liming; Lin, Xiaoyu; Lin, Haotian

2015-12-01

Widely used in clinical research, the database is a new type of data management automation technology and the most efficient tool for data management. In this article, we first explain some basic concepts, such as the definition, classification, and establishment of databases. Afterward, the workflow for establishing databases, inputting data, verifying data, and managing databases is presented. Meanwhile, by discussing the application of databases in clinical research, we illuminate the important role of databases in clinical research practice. Lastly, we introduce the reanalysis of randomized controlled trials (RCTs) and cloud computing techniques, showing the most recent advancements of databases in clinical research.

Optical Fiber Networks for Remote Fiber Optic Sensors

PubMed Central

Fernandez-Vallejo, Montserrat; Lopez-Amo, Manuel

2012-01-01

This paper presents an overview of optical fiber sensor networks for remote sensing. Firstly, the state of the art of remote fiber sensor systems has been considered. We have summarized the great evolution of these systems in recent years; this progress confirms that fiber-optic remote sensing is a promising technology with a wide field of practical applications. Afterwards, the most representative remote fiber-optic sensor systems are briefly explained, discussing their schemes, challenges, pros and cons. Finally, a synopsis of the main factors to take into consideration in the design of a remote sensor system is gathered. PMID:22666011

Considerations regarding the implementation of EPR dosimetry for the population in the vicinity of Semipalatinsk nuclear test site based on experience from other radiation accidents.

PubMed

Skvortsov, Valeriy; Ivannikov, Alexander; Tikunov, Dimitri; Stepanenko, Valeriy; Borysheva, Natalie; Orlenko, Sergey; Nalapko, Mikhail; Hoshi, Masaharu

2006-02-01

General aspects of applying the method of retrospective dose estimation by electron paramagnetic resonance spectroscopy of human tooth enamel (EPR dosimetry) to the population residing in the vicinity of the Semipalatinsk nuclear test site are analyzed and summarized. The analysis is based on the results obtained during 20 years of investigations conducted in the Medical Radiological Research Center regarding the development and practical application of this method for wide-scale dosimetrical investigation of populations exposed to radiation after the Chernobyl accident and other radiation accidents.

[The design and experiment of complementary S coding matrix based on digital micromirror spectrometer].

PubMed

Zhang, Zhi-Hai; Gao, Ling-Xiao; Guo, Yuan-Jun; Wang, Wei; Mo, Xiang-Xia

2012-12-01

The template selection is essential in the application of digital micromirror spectrometer. The best theoretical coding H-matrix is not widely used due to acyclic, complex coding and difficult achievement. The noise ratio of best practical S-matrix for improvement is slightly inferior to matrix H. So we designed a new type complementary S-matrix. Through studying its noise improvement theory, the algorithm is proved to have the advantages of both H-matrix and S-matrix. The experiments proved that the SNR can be increased 2.05 times than S-template.

Multilayer perceptron with local constraint as an emerging method in spatial data analysis

NASA Astrophysics Data System (ADS)

de Bollivier, M.; Dubois, G.; Maignan, M.; Kanevsky, M.

1997-02-01

The use of Geographic Information Systems has revolutionalized the handling and the visualization of geo-referenced data and has underlined the critic role of spatial analysis. The usual tools for such a purpose are geostatistics which are widely used in Earth science. Geostatistics are based upon several hypothesis which are not always verified in practice. On the other hand, Artificial Neural Network (ANN) a priori can be used without special assumptions and are known to be flexible. This paper proposes to discuss the application of ANN in the case of the interpolation of a geo-referenced variable.

Total Protein Content Determination of Microalgal Biomass by Elemental Nitrogen Analysis and a Dedicated Nitrogen-to-Protein Conversion Factor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Laurens, Lieve M; Olstad-Thompson, Jessica L; Templeton, David W

Accurately determining protein content is important in the valorization of algal biomass in food, feed, and fuel markets, where these values are used for component balance calculations. Conversion of elemental nitrogen to protein is a well-accepted and widely practiced method, but depends on developing an applicable nitrogen-to-protein conversion factor. The methodology reported here covers the quantitative assessment of the total nitrogen content of algal biomass and a description of the methodology that underpins the accurate de novo calculation of a dedicated nitrogen-to-protein conversion factor.

Comparative estimation of the effectiveness of laser and other methods of stomatological disease treatment

NASA Astrophysics Data System (ADS)

Kunin, Anatoly A.; Erina, Stanislava V.; Pankova, Svetlana N.; Buerger, Friedhelm R.; Baumert, R.; Stepanov, Nicolay N.; Malinovskaya, L. A.; Sokolova, Irina A.; Podolskaya, Elana E.; Kazmina, Svetlana G.; Dergunova, Elvira I.; Mozhaev, N. N.

1996-11-01

A perspective trend in the perfection of laser methods of stomatological diseases treatment is the application of low intensity laser radiation having a wide range of the therapeutic effect. Thus, laser radiation has various, pathogenetic effect. Patients with carries, pulpits, periodontitis, diseases of parodontium and oral mucous membranes were treated. Traditional examination methods were used, i.e. biochemical, visual pulp examination, immunological and macrohistological ones. The obtained results prove high effectiveness of laser therapy in the treatment of a number of stomatological disease in comparison with traditional methods and can be recommended to be used in practice.

University guide to NASA, 1993

NASA Astrophysics Data System (ADS)

1992-10-01

This guide provides brief descriptions of the two NASA Headquarters program offices through which NASA primarily funds universities, the Office of Space Science and Applications and the Office of Aeronautics and Space Technology. It also describes NASA's Office of Commercial Programs, which funds the Centers for the Commercial Development of Space and the Small Business Innovation Research Program. This guide explains the roles played by NASA's eight field centers and the Jet Propulsion Laboratory, and gives a sampling of ongoing NASA-wide educational programs and services. Most importantly, this guide provides practical information in the form of names and telephone numbers of NASA contacts.

Fluorescent probes and nanoparticles for intracellular sensing of pH values

NASA Astrophysics Data System (ADS)

Shi, Wen; Li, Xiaohua; Ma, Huimin

2014-12-01

Intracellular pH regulates a number of cell metabolism processes and its sensing is thus of great importance for cell studies. Among various methods, fluorescent probes have been widely used for sensing intracellular pH values because of their high sensitivity and spatiotemporal resolution capability. In this article, the development of fluorescent probes with good practicability in sensing intracellular pH values and pH variation during 2009 - 2014 is reviewed. These fluorescence probes are divided into two kinds: small molecules and nanoparticles. Photophysical properties, advantages/disadvantages and applications of the two kinds of probes are discussed in detail.

Novel applications of array comparative genomic hybridization in molecular diagnostics.

PubMed

Cheung, Sau W; Bi, Weimin

2018-05-31

In 2004, the implementation of array comparative genomic hybridization (array comparative genome hybridization [CGH]) into clinical practice marked a new milestone for genetic diagnosis. Array CGH and single-nucleotide polymorphism (SNP) arrays enable genome-wide detection of copy number changes in a high resolution, and therefore microarray has been recognized as the first-tier test for patients with intellectual disability or multiple congenital anomalies, and has also been applied prenatally for detection of clinically relevant copy number variations in the fetus. Area covered: In this review, the authors summarize the evolution of array CGH technology from their diagnostic laboratory, highlighting exonic SNP arrays developed in the past decade which detect small intragenic copy number changes as well as large DNA segments for the region of heterozygosity. The applications of array CGH to human diseases with different modes of inheritance with the emphasis on autosomal recessive disorders are discussed. Expert commentary: An exonic array is a powerful and most efficient clinical tool in detecting genome wide small copy number variants in both dominant and recessive disorders. However, whole-genome sequencing may become the single integrated platform for detection of copy number changes, single-nucleotide changes as well as balanced chromosomal rearrangements in the near future.

Cd/In-Codoped TiO2 nanochips for high-efficiency photocatalytic dye degradation.

PubMed

Liu, Dongliang; Huang, Peng; Liu, Yong; Wu, Zhou; Li, Dongsheng; Guo, Jun; Wu, Tao

2018-05-01

Titanium dioxide has been widely investigated in the field of photocatalysis research. However, the wide bandgap (3.2 eV) greatly limits its practical applications because only ultraviolet light can be absorbed by bare TiO2. Herein, we report a facile approach to prepare Cd/In-codoped TiO2 nanochips with the capability of visible light absorption. Such bimetallic-doped TiO2 was synthesized through a two-step process: Cd/In/S-TiO2 gels were first synthesized by mixing the preformed Cd-In-S supertetrahedral nanoclusters with a titanium source, and the subsequent pyrolytic process effectively converted the gels into Cd/In-TiO2 nanochips with a thickness of ∼2.19 nm and a uniform diameter of ∼10.60 nm. Interestingly, the absorption band of Cd/In-TiO2 nanochips was adjusted by pyrolysis temperature, which further regulated the photocatalytic efficiency of dye degradation under visible light. Current research demonstrates that doping TiO2 by multimetallic sulfide nanoclusters opens up a new door to further enrich the dopants in TiO2 and broaden their potential applications.

The Electrospun Ceramic Hollow Nanofibers

PubMed Central

Davoudpour, Yalda; Habibi, Youssef; Elbahri, Mady

2017-01-01

Hollow nanofibers are largely gaining interest from the scientific community for diverse applications in the fields of sensing, energy, health, and environment. The main reasons are: their extensive surface area that increases the possibilities of engineering, their larger accessible active area, their porosity, and their sensitivity. In particular, semiconductor ceramic hollow nanofibers show greater space charge modulation depth, higher electronic transport properties, and shorter ion or electron diffusion length (e.g., for an enhanced charging–discharging rate). In this review, we discuss and introduce the latest developments of ceramic hollow nanofiber materials in terms of synthesis approaches. Particularly, electrospinning derivatives will be highlighted. The electrospun ceramic hollow nanofibers will be reviewed with respect to their most widely studied components, i.e., metal oxides. These nanostructures have been mainly suggested for energy and environmental remediation. Despite the various advantages of such one dimensional (1D) nanostructures, their fabrication strategies need to be improved to increase their practical use. The domain of nanofabrication is still advancing, and its predictable shortcomings and bottlenecks must be identified and addressed. Inconsistency of the hollow nanostructure with regard to their composition and dimensions could be one of such challenges. Moreover, their poor scalability hinders their wide applicability for commercialization and industrial use. PMID:29120403

Characterization of vector stimulated Brillouin scattering gain over wide power range

NASA Astrophysics Data System (ADS)

Li, Yongqian; An, Qi; Li, Xiaojuan; Zhang, Lixin

2017-07-01

The wide range power dependence of vector stimulated Brillouin scattering (SBS) gain is theoretically and experimentally characterized by a mathematical model and measurement system based on the heterodyne pump-Stokes technique. The results show that SBS phase shift is much more tolerant of pump depletion than SBS amplitude gain, hence the performance improvement of the SBS-based distributed sensing system can be achieved by measuring the SBS phase shift spectrum. The discussion about the measured Brillouin spectrum width versus pump power at different Stokes powers reveals that the occurrence of nonnegligible pump depletion imposes a restriction on the determination of pump and Stokes powers in an SBS amplitude gain-based application system. The amplitude gain and phase shift of vector SBS gain increase with the increase of pump power and decrease with the increase of Stokes power, which indicates that the design strategy with smaller Stokes power and higher pump power is reasonable. And the measured center-asymmetry of the SBS phase shift spectrum is mainly caused by the nonlinear refractive index, which puts a limitation on the maximum pump power. The obtained results can provide a useful basis for the optimal design of practical vector SBS gain-based application systems.

Increasing cell-device adherence using cultured insect cells for receptor-based biosensors

NASA Astrophysics Data System (ADS)

Terutsuki, Daigo; Mitsuno, Hidefumi; Sakurai, Takeshi; Okamoto, Yuki; Tixier-Mita, Agnès; Toshiyoshi, Hiroshi; Mita, Yoshio; Kanzaki, Ryohei

2018-03-01

Field-effect transistor (FET)-based biosensors have a wide range of applications, and a bio-FET odorant sensor, based on insect (Sf21) cells expressing insect odorant receptors (ORs) with sensitivity and selectivity, has emerged. To fully realize the practical application of bio-FET odorant sensors, knowledge of the cell-device interface for efficient signal transfer, and a reliable and low-cost measurement system using the commercial complementary metal-oxide semiconductor (CMOS) foundry process, will be indispensable. However, the interfaces between Sf21 cells and sensor devices are largely unknown, and electrode materials used in the commercial CMOS foundry process are generally limited to aluminium, which is reportedly toxic to cells. In this study, we investigated Sf21 cell-device interfaces by developing cross-sectional specimens. Calcium imaging of Sf21 cells expressing insect ORs was used to verify the functions of Sf21 cells as odorant sensor elements on the electrode materials. We found that the cell-device interface was approximately 10 nm wide on average, suggesting that the adhesion mechanism of Sf21 cells may differ from that of other cells. These results will help to construct accurate signal detection from expressed insect ORs using FETs.

Flexible and conformable broadband metamaterial absorber with wide-angle and polarization stability for radar application

NASA Astrophysics Data System (ADS)

Chen, Huijie; Yang, Xiaoqing; Wu, Shiyue; Zhang, Di; Xiao, Hui; Huang, Kama; Zhu, Zhanxia; Yuan, Jianping

2018-01-01

In this work, a type of flexible, broadband electromagnetic microwave absorber is designed, fabricated and experimentally characterized. The absorber is composed of lumped resistors loaded frequency selective surface which is mounted on flexible substrate using silicone rubber and in turn backed by copper film. The simulated results show that an effective absorption (over 90%) bandwidth spans from 7.6 to 18.3 GHz, which covers both X (8-12 GHz) and Ku (12-18 GHz) bands, namely a 82.6% fraction bandwidth. And the bandwidth performs a good absorption response by varying the incident angle up to 60° for both TE and TM polarization. Moreover, the flexibility of the substrate enables the absorber conformably to bend and attach to cylinders of various radius without breakdown of the absorber. The designed structure has been fabricated and measured for both planar and conformable cases, and absorption responses show a good agreement of the broadband absorption feature with the simulated ones. This work has demonstrated specifically that proposed structure provides polarization-insensitive, wide-angle, flexible and conformable wideband absorption, which extends the absorber’s application to practical radar cross section reductions for radars and warships.

Increasing cell–device adherence using cultured insect cells for receptor-based biosensors

PubMed Central

Mitsuno, Hidefumi; Sakurai, Takeshi; Okamoto, Yuki; Tixier-Mita, Agnès; Toshiyoshi, Hiroshi; Mita, Yoshio; Kanzaki, Ryohei

2018-01-01

Field-effect transistor (FET)-based biosensors have a wide range of applications, and a bio-FET odorant sensor, based on insect (Sf21) cells expressing insect odorant receptors (ORs) with sensitivity and selectivity, has emerged. To fully realize the practical application of bio-FET odorant sensors, knowledge of the cell–device interface for efficient signal transfer, and a reliable and low-cost measurement system using the commercial complementary metal-oxide semiconductor (CMOS) foundry process, will be indispensable. However, the interfaces between Sf21 cells and sensor devices are largely unknown, and electrode materials used in the commercial CMOS foundry process are generally limited to aluminium, which is reportedly toxic to cells. In this study, we investigated Sf21 cell–device interfaces by developing cross-sectional specimens. Calcium imaging of Sf21 cells expressing insect ORs was used to verify the functions of Sf21 cells as odorant sensor elements on the electrode materials. We found that the cell–device interface was approximately 10 nm wide on average, suggesting that the adhesion mechanism of Sf21 cells may differ from that of other cells. These results will help to construct accurate signal detection from expressed insect ORs using FETs. PMID:29657822

Quaternary laser devices: history and state of the art

NASA Astrophysics Data System (ADS)

Eliseev, Petr G.

1993-05-01

Quaternary alloys of semiconductor compounds are suitable materials for wide-spectrum optoelectronic applications. The most important property of these efficient luminescent materials is the opportunity to fit the lattice parameter in some range to a given value corresponding to another crystalline material. This leads to the method to construct defect-free and stress-free heterojunctions, which was used for the preparation of a number of laser and LED devices. Quaternaries of InGaAsP, InGaSbAs, InSbAsP, PbSnTeSe, and other alloys were introduced into practical usage particularly in diode laser devices. The alloy InGaAsP appears to be one of the most widely used in optoelectronic applications at present as it covers ranges near 1.3 and 1.55 micrometers wavelengths of fiber-optic communication. For the spectral range near 2 micrometers the alloy InGaSbAs seems to be most attractive, and cw-operating diode lasers at room temperature were demonstrated at 2.0 - 2.4 micrometers . The alloy PbSnTeSe was used to obtain a longest wave of diode laser emission 46 micrometers . Quaternaries played an important role in the development of the semiconductor optoelectronics during the last two decades.

Real-time specific surface area measurements via laser-induced breakdown spectroscopy

USGS Publications Warehouse

Washburn, Kathryn E.; Birdwell, Justin E.; Howard, James E.

2017-01-01

From healthcare to cosmetics to environmental science, the specific surface area (SSA) of micro- and mesoporous materials or products can greatly affect their chemical and physical properties. SSA results are also widely used to examine source rocks in conventional and unconventional petroleum resource plays. Despite its importance, current methods to measure SSA are often cumbersome, time-consuming, or require cryogenic consumables (e.g., liquid nitrogen). These methods are not amenable to high-throughput environments, have stringent sample preparation requirements, and are not practical for use in the field. We present a new application of laser-induced breakdown spectroscopy for rapid measurement of SSA. This study evaluates geological samples, specifically organic-rich oil shales, but the approach is expected to be applicable to many other types of materials. The method uses optical emission spectroscopy to examine laser-generated plasma and quantify the amount of argon adsorbed to a sample during an inert gas purge. The technique can accommodate a wide range of sample sizes and geometries and has the potential for field use. These advantages for SSA measurement combined with the simultaneous acquisition of composition information make this a promising new approach for characterizing geologic samples and other materials.

Multiple-wavelength vertical cavity laser arrays with wide wavelength span and high uniformity

NASA Astrophysics Data System (ADS)

Yuen, Wupen; Li, Gabriel S.; Chang-Hasnain, Connie J.

1996-12-01

Vertical-cavity surface-emitting lasers (VCSELs) are promising for numerous applications. In particular, due to their inherent single Fabry-Perot mode operation, VCSELs can be very useful for wavelength division multiplexing (WDM) systems allowing high bandwidth and high functionalities.1, 2 Multiple wavelength VCSEL arrays with wide channel spacings (>10 nm) provide an inexpensive solution to increasing the capacity of local area networks without using active wavelength controls.1 The lasing wavelength of a VCSEL is determined by the equivalent laser cavity thickness which can be varied by changing the thickness of either the l-spacer or the distributed Bragg reflector (DBR) layers. To make monolithic multiple-wavelength VCSEL arrays, the lasing wavelength, and therefore the cavity thickness, has to be varied at reasonable physical distances. For all practical applications, it is imperative for the fabrication technology to be controllable, cost-effective, and wafer-scale. Recently, we demonstrated a patterned-substrate molecular beam epitaxy (MBE) growth technique with in-situ laser reflectometry monitoring for fabricating multiple wavelength VCSEL arrays.3, 4 With this method, VCSEL arrays with very large and highly controllable lasing wavelength spans and excellent lasing characteristics have been achieved.

Simulation of generation of new ideas for new product development and IT services

NASA Astrophysics Data System (ADS)

Nasiopoulos, Dimitrios K.; Sakas, Damianos P.; Vlachos, D. S.; Mavrogianni, Amanda

2015-02-01

This paper describes a dynamic model of the New Product Development (NPD) process. The model has been occurring from best practice noticed in our research conducted at a range of situations. The model contributes to determine and put an IT company's NPD activities into the frame of the overall NPD process[1]. It has been found to be a useful tool for organizing data on IT company's NPD activities without enforcement an excessively restrictive research methodology refers to the model of NPD. The framework, which strengthens the model, will help to promote a research of the methods undertaken within an IT company's NPD process, thus promoting understanding and improvement of the simulation process[2]. IT companies tested many techniques with several different practices designed to improve the validity and efficacy of their NPD process[3]. Supported by the model, this research examines how widely accepted stated tactics are and what impact these best tactics have on NPD performance. The main assumption of this study is that simulation of generation of new ideas[4] will lead to greater NPD effectiveness and more successful products in IT companies. With the model implementation, practices concern the implementation strategies of NPD (product selection, objectives, leadership, marketing strategy and customer satisfaction) are all more widely accepted than best practices related with controlling the application of NPD (process control, measurements, results). In linking simulation with impact, our results states product success depends on developing strong products and ensuring organizational emphasis, through proper project selection. Project activities strengthens both product and project success. IT products and services success also depends on monitoring the NPD procedure through project management and ensuring team consistency with group rewards. Sharing experiences between projects can positively influence the NPD process.

Nation-scale adoption of new medicines by doctors: an application of the Bass diffusion model

PubMed Central

2012-01-01

Background The adoption of new medicines is influenced by a complex set of social processes that have been widely examined in terms of individual prescribers’ information-seeking and decision-making behaviour. However, quantitative, population-wide analyses of how long it takes for new healthcare practices to become part of mainstream practice are rare. Methods We applied a Bass diffusion model to monthly prescription volumes of 103 often-prescribed drugs in Australia (monthly time series data totalling 803 million prescriptions between 1992 and 2010), to determine the distribution of adoption rates. Our aim was to test the utility of applying the Bass diffusion model to national-scale prescribing volumes. Results The Bass diffusion model was fitted to the adoption of a broad cross-section of drugs using national monthly prescription volumes from Australia (median R2 = 0.97, interquartile range 0.95 to 0.99). The median time to adoption was 8.2 years (IQR 4.9 to 12.1). The model distinguished two classes of prescribing patterns – those where adoption appeared to be driven mostly by external forces (19 drugs) and those driven mostly by social contagion (84 drugs). Those driven more prominently by internal forces were found to have shorter adoption times (p = 0.02 in a non-parametric analysis of variance by ranks). Conclusion The Bass diffusion model may be used to retrospectively represent the patterns of adoption exhibited in prescription volumes in Australia, and distinguishes between adoption driven primarily by external forces such as regulation, or internal forces such as social contagion. The eight-year delay between the introduction of a new medicine and the adoption of the prescribing practice suggests the presence of system inertia in Australian prescribing practices. PMID:22876867

Selecting a Clinical Intervention Documentation System for an Academic Setting

PubMed Central

Andrus, Miranda; Hester, E. Kelly; Byrd, Debbie C.

2011-01-01

Pharmacists' clinical interventions have been the subject of a substantial body of literature that focuses on the process and outcomes of establishing an intervention documentation program within the acute care setting. Few reports describe intervention documentation as a component of doctor of pharmacy (PharmD) programs; none describe the process of selecting an intervention documentation application to support the complete array of pharmacy practice and experiential sites. The process that a school of pharmacy followed to select and implement a school-wide intervention system to document the clinical and financial impact of an experiential program is described. Goals included finding a tool that allowed documentation from all experiential sites and the ability to assign dollar savings (hard and soft) to all documented interventions. The paper provides guidance for other colleges and schools of pharmacy in selecting a clinical intervention documentation system for program-wide use. PMID:21519426

Selecting a clinical intervention documentation system for an academic setting.

PubMed

Fox, Brent I; Andrus, Miranda; Hester, E Kelly; Byrd, Debbie C

2011-03-10

Pharmacists' clinical interventions have been the subject of a substantial body of literature that focuses on the process and outcomes of establishing an intervention documentation program within the acute care setting. Few reports describe intervention documentation as a component of doctor of pharmacy (PharmD) programs; none describe the process of selecting an intervention documentation application to support the complete array of pharmacy practice and experiential sites. The process that a school of pharmacy followed to select and implement a school-wide intervention system to document the clinical and financial impact of an experiential program is described. Goals included finding a tool that allowed documentation from all experiential sites and the ability to assign dollar savings (hard and soft) to all documented interventions. The paper provides guidance for other colleges and schools of pharmacy in selecting a clinical intervention documentation system for program-wide use.

Acousto-ultrasonics to Assess Material and Structural Properties

NASA Technical Reports Server (NTRS)

Kautz, Harold E.

2002-01-01

This report was created to serve as a manual for applying the Acousto-Ultrasonic NDE method, as practiced at NASA Glenn, to the study of materials and structures for a wide range of applications. Three state of the art acousto-ultrasonic (A-U) analysis parameters, ultrasonic decay (UD) rate, mean time (or skewing factor, "s"), and the centroid of the power spectrum, "f(sub c)," have been studied and applied at GRC for NDE interrogation of various materials and structures of aerospace interest. In addition to this, a unique application of Lamb wave analysis is shown. An appendix gives a brief overview of Lamb Wave analysis. This paper presents the analysis employed to calculate these parameters and the development and reasoning behind their use. It also discusses the planning of A-U measurements for materials and structures to be studied. Types of transducer coupling are discussed including contact and non-contact via laser and air. Experimental planning includes matching transducer frequency range to material and geometry of the specimen to be studied. The effect on results of initially zeroing the DC component of the ultrasonic waveform is compared with not doing so. A wide range of interrogation problems are addressed via the application of these analysis parameters to real specimens is shown for five cases: Case 1: Differences in density in [0] SiC/RBSN ceramic matrix composite. Case 2: Effect of tensile fatigue cycling in [+/-45] SiC/SiC ceramic matrix composite. Case 3: Detecting creep life, and failure, in Udimet 520 Nickel-Based Super Alloy. Case 4: Detecting Surface Layer Formation in T-650-35/PMR-15 Polymer Matrix Composites Panels due to Thermal Aging. Case 5: Detecting Spin Test Degradation in PMC Flywheels. Among these cases a wide range of materials and geometries are studied.

Method meets application: on the use of earthquake scenarios in community-based disaster preparedness and response

NASA Astrophysics Data System (ADS)

Sargeant, S.; Sorensen, M. B.

2011-12-01

More than 50% of the world's population now live in urban areas. In less developed countries, future urban population increase will be due to natural population growth and rural-to-urban migration. As urban growth continues, the vulnerability of those living in these areas is also increasing. This presents a wide variety of challenges for humanitarian organisations that often have more experience of disaster response in rural settings rather than planning for large urban disasters. The 2010 Haiti earthquake highlighted the vulnerability of these organisations and the communities that they seek to support. To meet this challenge, a key consideration is how scientific information can support the humanitarian sector and their working practices. Here we review the current state of earthquake scenario modelling practice, with special focus on scenarios to be used in disaster response and response planning, and present an evaluation of how the field looks set to evolve. We also review current good practice and lessons learned from previous earthquakes with respect to planning for and responding to earthquakes in urban settings in the humanitarian sector, identifying key sectoral priorities. We then investigate the interface between these two areas to investigate the use of earthquake scenarios in disaster response planning and identify potential challenges both with respect to development of scientific models and their application on the ground.

Health-related physical fitness measures: reference values and reference equations for use in clinical practice.

PubMed

Tveter, Anne Therese; Dagfinrud, Hanne; Moseng, Tuva; Holm, Inger

2014-07-01

To provide reference values and reference equations for frequently used clinical field tests of health-related physical fitness for use in clinical practice. Cross-sectional design. General community. Convenience sample of volunteers (N=370) between 18 and 90 years of age were recruited from a wide range of settings (ie, work sites, schools, community centers for older adults) and different geographic locations (ie, urban, suburban, rural) in southeastern Norway. Not applicable. The participants conducted 5 clinical field tests (6-minute walk test, stair test, 30-second sit-to-stand test, handgrip test, fingertip-to-floor test). The results of the field tests showed that performance remained unchanged until approximately 50 years of age; after that, performance deteriorated with increasing age. Grip strength (79%), meters walked in 6 minutes (60%), and seconds used on the stair test (59%) could be well predicted by age, sex, height, and weight in participants ≥50 years of age, whereas the performance on all tests was less well predicted in participants <50 years of age. The reference values and reference equations provided in this study may increase the applicability and interpretability of the 6-minute walk test, stair test, 30-second sit-to-stand test, handgrip test, and fingertip-to-floor test in clinical practice. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Wearable sensor glove based on conducting fabric using electrodermal activity and pulse-wave sensors for e-health application.

PubMed

Lee, Youngbum; Lee, Byungwoo; Lee, Myoungho

2010-03-01

Improvement of the quality and efficiency of health in medicine, both at home and the hospital, calls for improved sensors that might be included in a common carrier such as a wearable sensor device to measure various biosignals and provide healthcare services that use e-health technology. Designed to be user-friendly, smart clothes and gloves respond well to the end users for health monitoring. This study describes a wearable sensor glove that is equipped with an electrodermal activity (EDA) sensor, pulse-wave sensor, conducting fabric, and an embedded system. The EDA sensor utilizes the relationship between drowsiness and the EDA signal. The EDA sensors were made using a conducting fabric instead of silver chloride electrodes, as a more practical and practically wearable device. The pulse-wave sensor measurement system, which is widely applied in oriental medicinal practices, is also a strong element in e-health monitoring systems. The EDA and pulse-wave signal acquisition module was constructed by connecting the sensor to the glove via a conductive fabric. The signal acquisition module is then connected to a personal computer that displays the results of the EDA and pulse-wave signal processing analysis and gives accurate feedback to the user. This system is designed for a number of applications for the e-health services, including drowsiness detection and oriental medicine.

An asymptotic theory for cross-correlation between auto-correlated sequences and its application on neuroimaging data.

PubMed

Zhou, Yunyi; Tao, Chenyang; Lu, Wenlian; Feng, Jianfeng

2018-04-20

Functional connectivity is among the most important tools to study brain. The correlation coefficient, between time series of different brain areas, is the most popular method to quantify functional connectivity. Correlation coefficient in practical use assumes the data to be temporally independent. However, the time series data of brain can manifest significant temporal auto-correlation. A widely applicable method is proposed for correcting temporal auto-correlation. We considered two types of time series models: (1) auto-regressive-moving-average model, (2) nonlinear dynamical system model with noisy fluctuations, and derived their respective asymptotic distributions of correlation coefficient. These two types of models are most commonly used in neuroscience studies. We show the respective asymptotic distributions share a unified expression. We have verified the validity of our method, and shown our method exhibited sufficient statistical power for detecting true correlation on numerical experiments. Employing our method on real dataset yields more robust functional network and higher classification accuracy than conventional methods. Our method robustly controls the type I error while maintaining sufficient statistical power for detecting true correlation in numerical experiments, where existing methods measuring association (linear and nonlinear) fail. In this work, we proposed a widely applicable approach for correcting the effect of temporal auto-correlation on functional connectivity. Empirical results favor the use of our method in functional network analysis. Copyright © 2018. Published by Elsevier B.V.

Liquid crystal 'blue phases' with a wide temperature range.

PubMed

Coles, Harry J; Pivnenko, Mikhail N

2005-08-18

Liquid crystal 'blue phases' are highly fluid self-assembled three-dimensional cubic defect structures that exist over narrow temperature ranges in highly chiral liquid crystals. The characteristic period of these defects is of the order of the wavelength of visible light, and they give rise to vivid specular reflections that are controllable with external fields. Blue phases may be considered as examples of tuneable photonic crystals with many potential applications. The disadvantage of these materials, as predicted theoretically and proved experimentally, is that they have limited thermal stability: they exist over a small temperature range (0.5-2 degrees C) between isotropic and chiral nematic (N*) thermotropic phases, which limits their practical applicability. Here we report a generic family of liquid crystals that demonstrate an unusually broad body-centred cubic phase (BP I*) from 60 degrees C down to 16 degrees C. We prove this with optical texture analysis, selective reflection spectroscopy, Kössel diagrams and differential scanning calorimetry, and show, using a simple polarizer-free electro-optic cell, that the reflected colour is switched reversibly in applied electric fields over a wide colour range in typically 10 ms. We propose that the unusual behaviour of these blue phase materials is due to their dimeric molecular structure and their very high flexoelectric coefficients. This in turn sets out new theoretical challenges and potentially opens up new photonic applications.

The floral morphospace – a modern comparative approach to study angiosperm evolution

PubMed Central

Chartier, Marion; Jabbour, Florian; Gerber, Sylvain; Mitteroecker, Philipp; Sauquet, Hervé; von Balthazar, Maria; Staedler, Yannick; Crane, Peter R.; Schönenberger, Jürg

2017-01-01

Summary Morphospaces are mathematical representations used for studying the evolution of morphological diversity and for the evaluation of evolved shapes among theoretically possible ones. Although widely used in zoology, they – with few exceptions – have been disregarded in plant science and in particular in the study of broad-scale patterns of floral structure and evolution. Here we provide basic information on the morphospace approach; we review earlier morphospace applications in plant science; and as a practical example, we construct and analyze a floral morphospace. Morphospaces are usually visualized with the help of ordination methods such as principal component analysis (PCA) or nonmetric multidimensional scaling (NMDS). The results of these analyses are then coupled with disparity indices that describe the spread of taxa in the space. We discuss these methods and apply modern statistical tools to the first and only angiosperm-wide floral morphospace published by Stebbins in 1951. Despite the incompleteness of Stebbins’ original dataset, our analyses highlight major, angiosperm-wide trends in the diversity of flower morphology and thereby demonstrate the power of this previously neglected approach in plant science. PMID:25539005

Novel Design of Iridium Phosphors with Pyridinylphosphinate Ligands for High-Efficiency Blue Organic Light-emitting Diodes

PubMed Central

Wu, Zheng-Guang; Jing, Yi-Ming; Lu, Guang-Zhao; Zhou, Jie; Zheng, You-Xuan; Zhou, Liang; Wang, Yi; Pan, Yi

2016-01-01

Due to the high quantum efficiency and wide scope of emission colors, iridium (Ir) (III) complexes have been widely applied as guest materials for OLEDs (organic light-emitting diodes). Contrary to well-developed Ir(III)-based red and green phosphorescent complexes, the efficient blue emitters are rare reported. Like the development of the LED, the absence of efficient and stable blue materials hinders the widely practical application of the OLEDs. Inspired by this, we designed two novel ancillary ligands of phenyl(pyridin-2-yl)phosphinate (ppp) and dipyridinylphosphinate (dpp) for efficient blue phosphorescent iridium complexes (dfppy)2Ir(ppp) and (dfppy)2Ir(dpp) (dfppy = 2-(2,4-difluorophenyl)pyridine) with good electron transport property. The devices using the new iridium phosphors display excellent electroluminescence (EL) performances with a peak current efficiency of 58.78 cd/A, a maximum external quantum efficiency of 28.3%, a peak power efficiency of 52.74 lm/W and negligible efficiency roll-off ratios. The results demonstrated that iridium complexes with pyridinylphosphinate ligands are potential blue phosphorescent materials for OLEDs. PMID:27929124

Wide field and highly sensitive angiography based on optical coherence tomography with akinetic swept source.

PubMed

Xu, Jingjiang; Song, Shaozhen; Wei, Wei; Wang, Ruikang K

2017-01-01

Wide-field vascular visualization in bulk tissue that is of uneven surface is challenging due to the relatively short ranging distance and significant sensitivity fall-off for most current optical coherence tomography angiography (OCTA) systems. We report a long ranging and ultra-wide-field OCTA (UW-OCTA) system based on an akinetic swept laser. The narrow instantaneous linewidth of the swept source with its high phase stability, combined with high-speed detection in the system enable us to achieve long ranging (up to 46 mm) and almost negligible system sensitivity fall-off. To illustrate these advantages, we compare the basic system performances between conventional spectral domain OCTA and UW-OCTA systems and their functional imaging of microvascular networks in living tissues. In addition, we show that the UW-OCTA is capable of different depth-ranging of cerebral blood flow within entire brain in mice, and providing unprecedented blood perfusion map of human finger in vivo . We believe that the UW-OCTA system has promises to augment the existing clinical practice and explore new biomedical applications for OCT imaging.

Wide field and highly sensitive angiography based on optical coherence tomography with akinetic swept source

PubMed Central

Xu, Jingjiang; Song, Shaozhen; Wei, Wei; Wang, Ruikang K.

2016-01-01

Wide-field vascular visualization in bulk tissue that is of uneven surface is challenging due to the relatively short ranging distance and significant sensitivity fall-off for most current optical coherence tomography angiography (OCTA) systems. We report a long ranging and ultra-wide-field OCTA (UW-OCTA) system based on an akinetic swept laser. The narrow instantaneous linewidth of the swept source with its high phase stability, combined with high-speed detection in the system enable us to achieve long ranging (up to 46 mm) and almost negligible system sensitivity fall-off. To illustrate these advantages, we compare the basic system performances between conventional spectral domain OCTA and UW-OCTA systems and their functional imaging of microvascular networks in living tissues. In addition, we show that the UW-OCTA is capable of different depth-ranging of cerebral blood flow within entire brain in mice, and providing unprecedented blood perfusion map of human finger in vivo. We believe that the UW-OCTA system has promises to augment the existing clinical practice and explore new biomedical applications for OCT imaging. PMID:28101428

A micromachined efficient parametric array loudspeaker with a wide radiation frequency band.

PubMed

Je, Yub; Lee, Haksue; Been, Kyounghun; Moon, Wonkyu

2015-04-01

Parametric array (PA) loudspeakers generate directional audible sound via the PA effect, which can make private listening possible. The practical applications of PA loudspeakers include information technology devices that require large power efficiency transducers with a wide frequency bandwidth. Piezoelectric micromachined ultrasonic transducers (PMUTs) are compact and efficient units for PA sources [Je, Lee, and Moon, Ultrasonics 53, 1124-1134 (2013)]. This study investigated the use of an array of PMUTs to make a PA loudspeaker with high power efficiency and wide bandwidth. The achievable maximum radiation bandwidth of the driver was calculated, and an array of PMUTs with two distinct resonance frequencies (f1 = 100 kHz, f2 = 110 kHz) was designed. Out-of-phase driving was used with the dual-resonance transducer array to increase the bandwidth. The fabricated PMUT array exhibited an efficiency of up to 71%, together with a ±3-dB bandwidth of 17 kHz for directly radiated primary waves, and 19.5 kHz (500 Hz to 20 kHz) for the difference frequency waves (with equalization).

An Adaptive Association Test for Multiple Phenotypes with GWAS Summary Statistics.

PubMed

Kim, Junghi; Bai, Yun; Pan, Wei

2015-12-01

We study the problem of testing for single marker-multiple phenotype associations based on genome-wide association study (GWAS) summary statistics without access to individual-level genotype and phenotype data. For most published GWASs, because obtaining summary data is substantially easier than accessing individual-level phenotype and genotype data, while often multiple correlated traits have been collected, the problem studied here has become increasingly important. We propose a powerful adaptive test and compare its performance with some existing tests. We illustrate its applications to analyses of a meta-analyzed GWAS dataset with three blood lipid traits and another with sex-stratified anthropometric traits, and further demonstrate its potential power gain over some existing methods through realistic simulation studies. We start from the situation with only one set of (possibly meta-analyzed) genome-wide summary statistics, then extend the method to meta-analysis of multiple sets of genome-wide summary statistics, each from one GWAS. We expect the proposed test to be useful in practice as more powerful than or complementary to existing methods. © 2015 WILEY PERIODICALS, INC.

A study of education and KSAOs on career entry for product engineers: What employers really want

NASA Astrophysics Data System (ADS)

Thornburgh, James

The purpose of the study was to investigate the ways that employers of product engineers evaluate potential employees' job readiness, and which theories related to the education-work transaction are supported by practice. This study used a mixed methods approach and consisted of a state-wide survey (N=106) and local interviews (N=8). The results of the research indicate that attributes of both the Theory of Individual Differences and Credentialing Theory are present in the hiring practices of product engineers. Consistent with the Theory of Individual Differences, employers indicate they look for evidence of various job-related Knowledge, Skills, Abilities, and Other attributes (KSAOs) and they indicate they are willing to hire applicants who have less than a bachelor's degree. Consistent with Credentialing Theory, employers advertise a formal education minimum which represents only one way that individuals may learn to be an engineer. This study also confirmed prior research that most employers use primarily non-evidence based predictors to evaluate applicants. The primary initial screening predictors were experience, GPA, and major, while the primary finalist selection predictors were unstructured interviews, and applications, followed by structured interviews, job knowledge tests, and work sample test. Contrary to previous findings, this study did not find any major differences between what HR professionals, engineering managers, or other manager look for in terms of qualifications or what predictors they use when evaluating applicants for product engineer positions.

Unmanned Aircraft System (UAS) Applications to Land and Natural Resource Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Robert; Smith, Karen; Wescott, Konstance

Unmanned Aircraft Systems (UASs) have made dramatic technical advances in the past decade. Their use domestically is currently tightly constrained by existing Federal Aviation Administration (FAA) regulations. Within the next few years, the FAA is expected to provide a regulatory framework that allows for a greatly expanded role for UASs in domestic airspace for a wide variety of applications. One of those will be remote sensing for land and natural resource monitoring. While there has recently been a large body of published research on UAS applications to environmental monitoring, in practice, very little has been operationalized by private or publicmore » entities to date. In July 2014, Argonne National Laboratory hosted a workshop dedicated to environmental monitoring UAS applications with attendance by representatives from 11 federal agencies as well as academics. The workshop reviewed the UAS state-of-the-art within the federal arena and barriers to broader UAS use. While a number of agencies, the including National Oceanic and Atmosphere Administration, the United States Geological Survey, National Aeronautics and Space Administration, and the Bureau of Land Management have conducted proof-of-concept UAS demonstrations, typically using surplus Department of Defense equipment, the promise of UAS systems at the moment remains untapped for a variety of reasons. The consensus was, however, that UAS systems will play an increasingly important role in cost-effectively supporting timely natural-resource and land-management monitoring needs. Environmental Practice 17: 170–177 (2015)« less